Science.gov

Sample records for aided design systems

  1. Computer-aided system design

    NASA Technical Reports Server (NTRS)

    Walker, Carrie K.

    1991-01-01

    A technique has been developed for combining features of a systems architecture design and assessment tool and a software development tool. This technique reduces simulation development time and expands simulation detail. The Architecture Design and Assessment System (ADAS), developed at the Research Triangle Institute, is a set of computer-assisted engineering tools for the design and analysis of computer systems. The ADAS system is based on directed graph concepts and supports the synthesis and analysis of software algorithms mapped to candidate hardware implementations. Greater simulation detail is provided by the ADAS functional simulator. With the functional simulator, programs written in either Ada or C can be used to provide a detailed description of graph nodes. A Computer-Aided Software Engineering tool developed at the Charles Stark Draper Laboratory (CSDL CASE) automatically generates Ada or C code from engineering block diagram specifications designed with an interactive graphical interface. A technique to use the tools together has been developed, which further automates the design process.

  2. Computer Aided Control System Design (CACSD)

    NASA Technical Reports Server (NTRS)

    Stoner, Frank T.

    1993-01-01

    The design of modern aerospace systems relies on the efficient utilization of computational resources and the availability of computational tools to provide accurate system modeling. This research focuses on the development of a computer aided control system design application which provides a full range of stability analysis and control design capabilities for aerospace vehicles.

  3. Uncertainty management in intelligent design aiding systems

    NASA Technical Reports Server (NTRS)

    Brown, Donald E.; Gabbert, Paula S.

    1988-01-01

    A novel approach to uncertainty management which is particularly effective in intelligent design aiding systems for large-scale systems is presented. The use of this approach in the materials handling system design domain is discussed. It is noted that, during any point in the design process, a point value can be obtained for the evaluation of feasible designs; however, the techniques described provide unique solutions for these point values using only the current information about the design environment.

  4. A rule based computer aided design system

    NASA Technical Reports Server (NTRS)

    Premack, T.

    1986-01-01

    A Computer Aided Design (CAD) system is presented which supports the iterative process of design, the dimensional continuity between mating parts, and the hierarchical structure of the parts in their assembled configuration. Prolog, an interactive logic programming language, is used to represent and interpret the data base. The solid geometry representing the parts is defined in parameterized form using the swept volume method. The system is demonstrated with a design of a spring piston.

  5. COMPUTER AIDED DESIGN OF DIFFUSED AERATION SYSTEMS

    EPA Science Inventory

    CADDAS (Computer Aided Design of Diffused Aeration Systems) is a microcomputer-based program that analyzes the cost and performance of diffused aeration used in activated sludge wastewater treatment systems. The program can analyze both coarse bubble and fine pore diffusers as we...

  6. Computer-aided dispatching system design specification

    SciTech Connect

    Briggs, M.G.

    1997-12-16

    This document defines the performance requirements for a graphic display dispatching system to support Hanford Patrol Operations Center. This document reflects the as-built requirements for the system that was delivered by GTE Northwest, Inc. This system provided a commercial off-the-shelf computer-aided dispatching system and alarm monitoring system currently in operations at the Hanford Patrol Operations Center, Building 2721E. This system also provides alarm back-up capability for the Plutonium Finishing Plant (PFP).

  7. Design Aids for Real-Time Systems (DARTS)

    NASA Technical Reports Server (NTRS)

    Szulewski, P. A.

    1982-01-01

    Design-Aids for Real-Time Systems (DARTS) is a tool that assists in defining embedded computer systems through tree structured graphics, military standard documentation support, and various analyses including automated Software Science parameter counting and metrics calculation. These analyses provide both static and dynamic design quality feedback which can potentially aid in producing efficient, high quality software systems.

  8. Artwork Interactive Design System (AIDS) program description

    NASA Technical Reports Server (NTRS)

    Johnson, B. T.; Taylor, J. F.

    1976-01-01

    An artwork interactive design system is described which provides the microelectronic circuit designer/engineer a tool to perform circuit design, automatic layout modification, standard cell design, and artwork verification at a graphics computer terminal using a graphics tablet at the designer/computer interface.

  9. Software For Computer-Aided Design Of Control Systems

    NASA Technical Reports Server (NTRS)

    Wette, Matthew

    1994-01-01

    Computer Aided Engineering System (CAESY) software developed to provide means to evaluate methods for dealing with users' needs in computer-aided design of control systems. Interpreter program for performing engineering calculations. Incorporates features of both Ada and MATLAB. Designed to be flexible and powerful. Includes internally defined functions, procedures and provides for definition of functions and procedures by user. Written in C language.

  10. Interactive graphical computer-aided design system

    NASA Technical Reports Server (NTRS)

    Edge, T. M.

    1975-01-01

    System is used for design, layout, and modification of large-scale-integrated (LSI) metal-oxide semiconductor (MOS) arrays. System is structured around small computer which provides real-time support for graphics storage display unit with keyboard, slave display unit, hard copy unit, and graphics tablet for designer/computer interface.

  11. PLAID- A COMPUTER AIDED DESIGN SYSTEM

    NASA Technical Reports Server (NTRS)

    Brown, J. W.

    1994-01-01

    PLAID is a three-dimensional Computer Aided Design (CAD) system which enables the user to interactively construct, manipulate, and display sets of highly complex geometric models. PLAID was initially developed by NASA to assist in the design of Space Shuttle crewstation panels, and the detection of payload object collisions. It has evolved into a more general program for convenient use in many engineering applications. Special effort was made to incorporate CAD techniques and features which minimize the users workload in designing and managing PLAID models. PLAID consists of three major modules: the Primitive Object Generator (BUILD), the Composite Object Generator (COG), and the DISPLAY Processor. The BUILD module provides a means of constructing simple geometric objects called primitives. The primitives are created from polygons which are defined either explicitly by vertex coordinates, or graphically by use of terminal crosshairs or a digitizer. Solid objects are constructed by combining, rotating, or translating the polygons. Corner rounding, hole punching, milling, and contouring are special features available in BUILD. The COG module hierarchically organizes and manipulates primitives and other previously defined COG objects to form complex assemblies. The composite object is constructed by applying transformations to simpler objects. The transformations which can be applied are scalings, rotations, and translations. These transformations may be defined explicitly or defined graphically using the interactive COG commands. The DISPLAY module enables the user to view COG assemblies from arbitrary viewpoints (inside or outside the object) both in wireframe and hidden line renderings. The PLAID projection of a three-dimensional object can be either orthographic or with perspective. A conflict analysis option enables detection of spatial conflicts or collisions. DISPLAY provides camera functions to simulate a view of the model through different lenses. Other

  12. Space systems computer-aided design technology

    NASA Technical Reports Server (NTRS)

    Garrett, L. B.

    1984-01-01

    The interactive Design and Evaluation of Advanced Spacecraft (IDEAS) system is described, together with planned capability increases in the IDEAS system. The system's disciplines consist of interactive graphics and interactive computing. A single user at an interactive terminal can create, design, analyze, and conduct parametric studies of earth-orbiting satellites, which represents a timely and cost-effective method during the conceptual design phase where various missions and spacecraft options require evaluation. Spacecraft concepts evaluated include microwave radiometer satellites, communication satellite systems, solar-powered lasers, power platforms, and orbiting space stations.

  13. Microcomputer-Aided Control Systems Design.

    ERIC Educational Resources Information Center

    Roat, S. D.; Melsheimer, S. S.

    1987-01-01

    Describes a single input/single output feedback control system design program for IBM PC and compatible microcomputers. Uses a heat exchanger temperature control loop to illustrate the various applications of the program. (ML)

  14. User interface for integrated computer aided design systems

    NASA Technical Reports Server (NTRS)

    Schwing, James L.

    1986-01-01

    The purpose was the development of a user interface and other appropriate tools to be used in Computer Aided Design systems which can integrate a wide variety of independently developed design and analysis tools. The interface was intended for the integration of programs to be used in the conceptual design of aerospace systems. A user's manual is included.

  15. Computer-aided design of flight control systems

    NASA Technical Reports Server (NTRS)

    Stengel, Robert F.; Sircar, Subrata

    1991-01-01

    A computer program is presented for facilitating the development and assessment of flight control systems, and application to a control design is discussed. The program is a computer-aided control-system design program based on direct digital synthesis of a proportional-integral-filter controller with scheduled linear-quadratic-Gaussian gains and command generator tracking of pilot inputs. The FlightCAD system concentrates on aircraft dynamics, flight-control systems, stability and performance, and has practical engineering applications.

  16. Computer-Aided dispatching system design specification

    SciTech Connect

    Briggs, M.G.

    1996-05-03

    This document defines the performance requirements for a graphic display dispatching system to support Hanford Patrol emergency response. This system is defined as a Commercial-Off the-Shelf computer dispatching system providing both text and graphical display information while interfacing with the diverse reporting system within the Hanford Facility. This system also provided expansion capabilities to integrate Hanford Fire and the Occurrence Notification Center and provides back-up capabilities for the Plutonium Processing Facility.

  17. Computer-Aided dispatching system design specification

    SciTech Connect

    Briggs, M.G.

    1996-09-27

    This document defines the performance requirements for a graphic display dispatching system to support Hanford Patrol emergency response. This document outlines the negotiated requirements as agreed to by GTE Northwest during technical contract discussions. This system defines a commercial off-the-shelf computer dispatching system providing both test and graphic display information while interfacing with diverse alarm reporting system within the Hanford Site. This system provided expansion capability to integrate Hanford Fire and the Occurrence Notification Center. The system also provided back-up capability for the Plutonium Processing Facility (PFP).

  18. Information technology aided exploration of system design spaces

    NASA Technical Reports Server (NTRS)

    Feather, Martin S.; Kiper, James D.; Kalafat, Selcuk

    2004-01-01

    We report on a practical application of information technology techniques to aid system engineers effectively explore large design spaces. We make use of heuristic search, visualization and data mining, the combination of which we have implemented wtihin a risk management tool in use at JPL and NASA.

  19. Program Aids Design Of Fluid-Circulating Systems

    NASA Technical Reports Server (NTRS)

    Bacskay, Allen; Dalee, Robert

    1992-01-01

    Computer Aided Systems Engineering and Analysis (CASE/A) program is interactive software tool for trade study and analysis, designed to increase productivity during all phases of systems engineering. Graphics-based command-driven software package provides user-friendly computing environment in which engineer analyzes performance and interface characteristics of ECLS/ATC system. Useful during all phases of spacecraft-design program, from initial conceptual design trade studies to actual flight, including pre-flight prediction and in-flight analysis of anomalies. Written in FORTRAN 77.

  20. Quicklist: The basis for a computer aided logic design system

    NASA Technical Reports Server (NTRS)

    Lushbaugh, W. A.

    1980-01-01

    Quicklist, a preprocessor for an existing wire list program that cuts the description of the wire list by about 67 percent over previous methods, is described. Quicklist uses two different methods to shorten the input data. The first of these is the use of parentheses to allow a compact way of describing signal names which increment (or decrement) by one, i.e., typical signal names in a bus. The other method used is the equal sign. Using this symbol in a signal list says that the rest of the signals on that chip are the same as those on the previous chip described. Quicklist is intended to be the basis of a computer aided logic design system.

  1. Electronic aids to conceptual design

    NASA Technical Reports Server (NTRS)

    Bouchard, Eugene E.

    1990-01-01

    Presented in viewgraph form are techniques to improve the conceptual design of complex systems. The paper discusses theory of design, flexible software tools for computer aided design, and methods for enhancing communication among design teams.

  2. Computer aided optimal design of compressed air energy storage systems

    NASA Astrophysics Data System (ADS)

    Ahrens, F. W.; Sharma, A.; Ragsdell, K. M.

    1980-07-01

    An automated procedure for the design of Compressed Air Energy Storage (CAES) systems is presented. The procedure relies upon modern nonlinear programming algorithms, decomposition theory, and numerical models of the various system components. Two modern optimization methods are employed; BIAS, a Method of Multipliers code and OPT, a Generalized Reduced Gradient code. The procedure is demonstrated by the design of a CAES facility employing the Media, Illinois Galesville aquifer as the reservoir. The methods employed produced significant reduction in capital and operating cost, and in number of aquifer wells required.

  3. Designing State Aid Formulas

    ERIC Educational Resources Information Center

    Zhao, Bo; Bradbury, Katharine

    2009-01-01

    This paper designs a new equalization-aid formula based on fiscal gaps of local communities. When states are in transition to a new local aid formula, the issue of whether and how to hold existing aid harmless poses a challenge. The authors show that some previous studies and the formulas derived from them give differential weights to existing and…

  4. Computer-aided designing of automatic process control systems for thermal power stations

    NASA Astrophysics Data System (ADS)

    Trofimov, A. V.

    2009-10-01

    The structure of modern microprocessor systems for automated control of technological processes at cogeneration stations is considered. Methods for computer-aided designing of the lower (sensors and actuators) and upper (cabinets of computerized automation equipment) levels of an automated process control system are proposed. The composition of project documents, the structures of a project database and database of a computer-aided design system, and the way they interact with one another in the course of developing the project of an automated process control system are described. Elements of the interface between a design engineer and computer program are shown.

  5. The state of PC-based CADD (computer-aided design and drafting) systems

    SciTech Connect

    Brandt, G.L.; Bowers, J.M.; Gorman, T.S.; Taylor, L.E.

    1988-07-11

    This report provides an overview of the state of the art of personal computer (PC)-based computer-aided design and drafting (CADD) systems for mechanical engineering applications. It presents the results of an evaluation performed on seven systems during October 1987 to March 1988 and summarizes the strengths and weaknesses of the systems.

  6. Application of fuzzy logic in computer-aided design of digital systems

    NASA Astrophysics Data System (ADS)

    Shragowitz, Eugene B.; Lee, Jun-Yong; Kang, Eric Q.

    1996-06-01

    Application of fuzzy logic structures in computer-aided design (CAD) of electronic systems substantially improves quality of design solutions by providing designers with flexibility in formulating goals and selecting trade-offs. In addition, the following aspects of a design process are positively impacted by application of fuzzy logic: utilization of domain knowledge, interpretation of uncertainties in design data, and adaptation of design algorithms. We successfully applied fuzzy logic structures in conjunction with constructive and iterative algorithms for selecting of design solutions for different stages of the design process. We also introduced a fuzzy logic software development tool to be used in CAD applications.

  7. Wireless Hearing Aid System Simulations using Advanced Design System™: A Behavioral Modeling Approach.

    PubMed

    Singh Rana, Ram; Bin, Tang; Liang, Zhang; Hari Krishna, Garg; De Yun, Wang

    2005-01-01

    The stringent requirements on size and power consumption constrain the conventional hearing aid devices from providing the patients an economic and user friendly solution, specifically for better noise cancellation. With the advancements in technologies such as integrated circuits design, wireless communications and digital signal processing techniques, the wireless hearing aids having multi-microphones, analog, digital and mixed signals and radio frequency signals processing circuits, DSP and programmable units seem to be promising to provide enhanced performance. The focus of this paper is about the system simulation of a typical wireless hearing aid using Agilent Advanced Design System™. The behavioral modeling features are exploited to enable the whole system simulations including electro-acoustic transducers. A few system level simulation results are included. PMID:17282359

  8. Experience gained at ZAO Ural Turbine Works with the use of computer-aided design systems

    NASA Astrophysics Data System (ADS)

    Kortenko, V. V.; Valamin, A. E.; Shanturov, D. N.; Sokolov, E. V.; Toibich, S. V.; Glushchenko, A. N.

    2008-08-01

    The results of work accomplished in the field of computer-aided design at ZAO Ural Turbine Works (UTZ) are presented. A concept is described following which the tasks for a specialist’s workstations being developed at the UTZ are solved. Results from solution of problems with the use of modern numerical simulation computer programs for analyzing gas dynamic processes, casting, welding, and strength of complex structures are given. An example is given to show efficient use of a computer-aided design system for shifting an enterprise to a modern level of automation.

  9. Online Design Aid for Evaluating Manure Pit Ventilation Systems to Reduce Entry Risk.

    PubMed

    Manbeck, Harvey B; Hofstetter, Daniel W; Murphy, Dennis J; Puri, Virendra M

    2016-01-01

    On-farm manure storage pits contain both toxic and asphyxiating gases such as hydrogen sulfide, carbon dioxide, methane, and ammonia. Farmers and service personnel occasionally need to enter these pits to conduct repair and maintenance tasks. One intervention to reduce the toxic and asphyxiating gas exposure risk to farm workers when entering manure pits is manure pit ventilation. This article describes an online computational fluid dynamics-based design aid for evaluating the effectiveness of manure pit ventilation systems to reduce the concentrations of toxic and asphyxiating gases in the manure pits. This design aid, developed by a team of agricultural engineering and agricultural safety specialists at Pennsylvania State University, represents the culmination of more than a decade of research and technology development effort. The article includes a summary of the research efforts leading to the online design aid development and describes protocols for using the online design aid, including procedures for data input and for accessing design aid results. Design aid results include gas concentration decay and oxygen replenishment curves inside the manure pit and inside the barns above the manure pits, as well as animated motion pictures of individual gas concentration decay and oxygen replenishment in selected horizontal and vertical cut plots in the manure pits and barns. These results allow the user to assess (1) how long one needs to ventilate the pits to remove toxic and asphyxiating gases from the pit and barn, (2) from which portions of the barn and pit these gases are most and least readily evacuated, and (3) whether or not animals and personnel need to be removed from portions of the barn above the manure pit being ventilated. PMID:27303661

  10. Online Design Aid for Evaluating Manure Pit Ventilation Systems to Reduce Entry Risk

    PubMed Central

    Manbeck, Harvey B.; Hofstetter, Daniel W.; Murphy, Dennis J.; Puri, Virendra M.

    2016-01-01

    On-farm manure storage pits contain both toxic and asphyxiating gases such as hydrogen sulfide, carbon dioxide, methane, and ammonia. Farmers and service personnel occasionally need to enter these pits to conduct repair and maintenance tasks. One intervention to reduce the toxic and asphyxiating gas exposure risk to farm workers when entering manure pits is manure pit ventilation. This article describes an online computational fluid dynamics-based design aid for evaluating the effectiveness of manure pit ventilation systems to reduce the concentrations of toxic and asphyxiating gases in the manure pits. This design aid, developed by a team of agricultural engineering and agricultural safety specialists at Pennsylvania State University, represents the culmination of more than a decade of research and technology development effort. The article includes a summary of the research efforts leading to the online design aid development and describes protocols for using the online design aid, including procedures for data input and for accessing design aid results. Design aid results include gas concentration decay and oxygen replenishment curves inside the manure pit and inside the barns above the manure pits, as well as animated motion pictures of individual gas concentration decay and oxygen replenishment in selected horizontal and vertical cut plots in the manure pits and barns. These results allow the user to assess (1) how long one needs to ventilate the pits to remove toxic and asphyxiating gases from the pit and barn, (2) from which portions of the barn and pit these gases are most and least readily evacuated, and (3) whether or not animals and personnel need to be removed from portions of the barn above the manure pit being ventilated. PMID:27303661

  11. IDEAS: A multidisciplinary computer-aided conceptual design system for spacecraft

    NASA Technical Reports Server (NTRS)

    Ferebee, M. J., Jr.

    1984-01-01

    During the conceptual development of advanced aerospace vehicles, many compromises must be considered to balance economy and performance of the total system. Subsystem tradeoffs may need to be made in order to satisfy system-sensitive attributes. Due to the increasingly complex nature of aerospace systems, these trade studies have become more difficult and time-consuming to complete and involve interactions of ever-larger numbers of subsystems, components, and performance parameters. The current advances of computer-aided synthesis, modeling and analysis techniques have greatly helped in the evaluation of competing design concepts. Langley Research Center's Space Systems Division is currently engaged in trade studies for a variety of systems which include advanced ground-launched space transportation systems, space-based orbital transfer vehicles, large space antenna concepts and space stations. The need for engineering analysis tools to aid in the rapid synthesis and evaluation of spacecraft has led to the development of the Interactive Design and Evaluation of Advanced Spacecraft (IDEAS) computer-aided design system. The ADEAS system has been used to perform trade studies of competing technologies and requirements in order to pinpoint possible beneficial areas for research and development. IDEAS is presented as a multidisciplinary tool for the analysis of advanced space systems. Capabilities range from model generation and structural and thermal analysis to subsystem synthesis and performance analysis.

  12. Operator Station Design System - A computer aided design approach to work station layout

    NASA Technical Reports Server (NTRS)

    Lewis, J. L.

    1979-01-01

    The Operator Station Design System is resident in NASA's Johnson Space Center Spacecraft Design Division Performance Laboratory. It includes stand-alone minicomputer hardware and Panel Layout Automated Interactive Design and Crew Station Assessment of Reach software. The data base consists of the Shuttle Transportation System Orbiter Crew Compartment (in part), the Orbiter payload bay and remote manipulator (in part), and various anthropometric populations. The system is utilized to provide panel layouts, assess reach and vision, determine interference and fit problems early in the design phase, study design applications as a function of anthropometric and mission requirements, and to accomplish conceptual design to support advanced study efforts.

  13. Crew aiding and automation: A system concept for terminal area operations, and guidelines for automation design

    NASA Technical Reports Server (NTRS)

    Dwyer, John P.

    1994-01-01

    This research and development program comprised two efforts: the development of guidelines for the design of automated systems, with particular emphasis on automation design that takes advantage of contextual information, and the concept-level design of a crew aiding system, the Terminal Area Navigation Decision Aiding Mediator (TANDAM). This concept outlines a system capable of organizing navigation and communication information and assisting the crew in executing the operations required in descent and approach. In service of this endeavor, problem definition activities were conducted that identified terminal area navigation and operational familiarization exercises addressing the terminal area navigation problem. Both airborne and ground-based (ATC) elements of aircraft control were extensively researched. The TANDAM system concept was then specified, and the crew interface and associated systems described. Additionally, three descent and approach scenarios were devised in order to illustrate the principal functions of the TANDAM system concept in relation to the crew, the aircraft, and ATC. A plan for the evaluation of the TANDAM system was established. The guidelines were developed based on reviews of relevant literature, and on experience gained in the design effort.

  14. Computer-aided design of control systems to meet many requirements

    NASA Technical Reports Server (NTRS)

    Schy, A. A.; Adams, W. M., Jr.; Johnson, K. G.

    1974-01-01

    A method is described for using nonlinear programing in the computer-aided design of airplane control systems. It is assumed that the quality of such systems depends on many criteria. These criteria are included in the constraints vector (instead of attempting to combine them into a single scalar criterion, as is usually done), and the design proceeds through a sequence of nonlinear programing solutions in which the designer varies the specification of sets of requirements levels. The method is applied to design of a lateral stability augmentation system (SAS) for a fighter airplane, in which the requirements vector is chosen from the official handling qualities specifications. Results are shown for several simple SAS configurations designed to obtain desirable handling qualities over all design flight conditions with minimum feedback gains. The choice of the final design for each case is not unique but depends on the designer's decision as to which achievable set of requirements levels represents the best for that system. Results indicate that it may be possible to design constant parameter SAS which can satisfy the most stringent handling qualities requirements for fighter airplanes in all flight conditions. The role of the designer as a decision maker, interacting with the computer program, is discussed. Advantages of this type of designer-computer interaction are emphasized. Desirable extensions of the method are indicated.

  15. Micrometric precision of prosthetic dental crowns obtained by optical scanning and computer-aided designing/computer-aided manufacturing system

    NASA Astrophysics Data System (ADS)

    das Neves, Flávio Domingues; de Almeida Prado Naves Carneiro, Thiago; do Prado, Célio Jesus; Prudente, Marcel Santana; Zancopé, Karla; Davi, Letícia Resende; Mendonça, Gustavo; Soares, Carlos José

    2014-08-01

    The current study evaluated prosthetic dental crowns obtained by optical scanning and a computer-aided designing/computer-aided manufacturing system using micro-computed tomography to compare the marginal fit. The virtual models were obtained with four different scanning surfaces: typodont (T), regular impressions (RI), master casts (MC), and powdered master casts (PMC). Five virtual models were obtained for each group. For each model, a crown was designed on the software and milled from feldspathic ceramic blocks. Micro-CT images were obtained for marginal gap measurements and the data were statistically analyzed by one-way analysis of variance followed by Tukey's test. The mean vertical misfit was T=62.6±65.2 μm; MC=60.4±38.4 μm; PMC=58.1±38.0 μm, and RI=89.8±62.8 μm. Considering a percentage of vertical marginal gap of up to 75 μm, the results were T=71.5%, RI=49.2%, MC=69.6%, and PMC=71.2%. The percentages of horizontal overextension were T=8.5%, RI=0%, MC=0.8%, and PMC=3.8%. Based on the results, virtual model acquisition by scanning the typodont (simulated mouth) or MC, with or without powder, showed acceptable values for the marginal gap. The higher result of marginal gap of the RI group suggests that it is preferable to scan this directly from the mouth or from MC.

  16. Computer-aided design and distributed system technology development for large space structures

    NASA Technical Reports Server (NTRS)

    Armstrong, Ernest S.; Joshi, Suresh M.

    1986-01-01

    Proposed large space structures have many characteristics that make them difficult to analyze and control. They are highly flexible, with components mathematically modeled by partial differential equations or very large systems of ordinary differential equations. They have many resonant frequencies, typically low and closely spaced. Natural damping may be low and/or improperly modeled. Coupled with stringent operational requirements of orientation, shape control, and vibration suppression, and the inability to perform adequate ground testing, these characteristics present an unconventional identification and control design problem to the systems theorist. Some of the research underway within Langley's Spacecraft Control Branch, Guidance and Control Division aimed at developing theory and algorithms to treat large space structures systems identification and control problems is described. The research areas to be considered are computer-aided design algorithms, and systems identification and control of distributed systems.

  17. Computer Aided Engineering Design

    NASA Astrophysics Data System (ADS)

    Saxena, Anupam; Sahay, Birendra

    This book amalgamates geometric modelling, analysis and optimization, the three important aspects in Computer Aided Engineering Design. While the three subjects are well developed by themselves, a detailed discussion on engineering visualization (transformations and projections) and mathematical background of free form, parametric and piecewise design of curves and surfaces is provided. A topological basis is given when discussing wireframe, boundary representation and constructive solid geometry as solid modelling techniques. http://www.springeronline.com/alert/article?a=3D1_1fva7w_9hjul_18j_6

  18. Echelle spectrograph software design aid

    NASA Technical Reports Server (NTRS)

    Dantzler, A. A.

    1985-01-01

    A method for mapping, to first order, the spectrograms that result from echelle spectrographic systems is discussed. An in-depth description of the principles behind the method are given so that software may be generated. Such software is an invaluable echelle spectrograph design aid. Results from two applications are discussed.

  19. COMPUTER AIDED SOLVENT DESIGN FOR POLLUTION PREVENTION - PARIS II (SYSTEMS ANALYSIS BRANCH, SUSTAINABLE TECHNOLOGY DIVISION, NRMRL)

    EPA Science Inventory

    This method was designed to facilitate the replacement of environmentally objectionable industrial solvents by using computer aided methods to design benign replacement solvents or solvent mixtures. The method generates a short list of recommended replacement solvents or mixtures...

  20. ACSYNT - A standards-based system for parametric, computer aided conceptual design of aircraft

    NASA Technical Reports Server (NTRS)

    Jayaram, S.; Myklebust, A.; Gelhausen, P.

    1992-01-01

    A group of eight US aerospace companies together with several NASA and NAVY centers, led by NASA Ames Systems Analysis Branch, and Virginia Tech's CAD Laboratory agreed, through the assistance of Americal Technology Initiative, in 1990 to form the ACSYNT (Aircraft Synthesis) Institute. The Institute is supported by a Joint Sponsored Research Agreement to continue the research and development in computer aided conceptual design of aircraft initiated by NASA Ames Research Center and Virginia Tech's CAD Laboratory. The result of this collaboration, a feature-based, parametric computer aided aircraft conceptual design code called ACSYNT, is described. The code is based on analysis routines begun at NASA Ames in the early 1970's. ACSYNT's CAD system is based entirely on the ISO standard Programmer's Hierarchical Interactive Graphics System and is graphics-device independent. The code includes a highly interactive graphical user interface, automatically generated Hermite and B-Spline surface models, and shaded image displays. Numerous features to enhance aircraft conceptual design are described.

  1. Development of the engineering design integration (EDIN) system: A computer aided design development

    NASA Technical Reports Server (NTRS)

    Glatt, C. R.; Hirsch, G. N.

    1977-01-01

    The EDIN (Engineering Design Integration) System which provides a collection of hardware and software, enabling the engineer to perform man-in-the-loop interactive evaluation of aerospace vehicle concepts, was considered. Study efforts were concentrated in the following areas: (1) integration of hardware with the Univac Exec 8 System; (2) development of interactive software for the EDIN System; (3) upgrading of the EDIN technology module library to an interactive status; (4) verification of the soundness of the developing EDIN System; (5) support of NASA in design analysis studies using the EDIN System; (6) provide training and documentation in the use of the EDIN System; and (7) provide an implementation plan for the next phase of development and recommendations for meeting long range objectives.

  2. Selecting and implementing an interactive Computer Aided Design Drafting/Manufacturing (CADD/M) system

    SciTech Connect

    Norton, F.J.

    1980-09-23

    Success with Interactive Computer-Aided Design Drafting/Manufacturing (CADD/M) depends upon management, users, and the system itself. If you are in a design and drafting environment, the thought of acquiring a CADD/M system will probably occur to you sometime in the very near future - if it hasn't already. Convincing yourself and your management of the benefits of such systems is but the first step. Evaluating and selecting one particular type of CADD/M system can turn out to be a complicated undertaking - not to mention somewhat frustrating. Procedures for selecting and successfully implementing a CADD/M system are outlined. INITIAL PREPARATION examines the techniques used to evaluate CADD/M systems including formation of an evaluation team, and application analysis. GRAPHICS EVALUATION describes the methods that can be used to test a CADD/M system, including benchmark drawings and specifications, human engineering considerations, and other evaluation criteria and general system configurations are also discussed. COMPUTER SYSTEM EVALUATION examines other factors in systems selection: programming, communications, documentation, and service. SYSTEM STARTUP addresses site preparation, people preparation, system acceptance, and operator, designer/drafter selection. Finally, operator, designer/drafter TRAINING and SYSTEM MANAGEMENT are discussed. This systematic approach wil help those contemplating the acquisition of CADD/M systems for their activities and will help minimize unplanned events and problem areas.Advanced planning in these areas is needed to ensure successful implementation of a CADD/M system. This in turn will lead to considerable cost savings and schedule improvements for an entire project, from initial design to final production. These are ambitious goals but easily realized if a logical and rational plan is adopted in the same manner as that used in a typical development program.

  3. VIP: A knowledge-based design aid for the engineering of space systems

    NASA Technical Reports Server (NTRS)

    Lewis, Steven M.; Bellman, Kirstie L.

    1990-01-01

    The Vehicles Implementation Project (VIP), a knowledge-based design aid for the engineering of space systems is described. VIP combines qualitative knowledge in the form of rules, quantitative knowledge in the form of equations, and other mathematical modeling tools. The system allows users rapidly to develop and experiment with models of spacecraft system designs. As information becomes available to the system, appropriate equations are solved symbolically and the results are displayed. Users may browse through the system, observing dependencies and the effects of altering specific parameters. The system can also suggest approaches to the derivation of specific parameter values. In addition to providing a tool for the development of specific designs, VIP aims at increasing the user's understanding of the design process. Users may rapidly examine the sensitivity of a given parameter to others in the system and perform tradeoffs or optimizations of specific parameters. A second major goal of VIP is to integrate the existing corporate knowledge base of models and rules into a central, symbolic form.

  4. Large Advanced Space Systems (LASS) computer-aided design program additions

    NASA Technical Reports Server (NTRS)

    Farrell, C. E.

    1982-01-01

    The LSS preliminary and conceptual design requires extensive iteractive analysis because of the effects of structural, thermal, and control intercoupling. A computer aided design program that will permit integrating and interfacing of required large space system (LSS) analyses is discussed. The primary objective of this program is the implementation of modeling techniques and analysis algorithms that permit interactive design and tradeoff studies of LSS concepts. Eight software modules were added to the program. The existing rigid body controls module was modified to include solar pressure effects. The new model generator modules and appendage synthesizer module are integrated (interfaced) to permit interactive definition and generation of LSS concepts. The mass properties module permits interactive specification of discrete masses and their locations. The other modules permit interactive analysis of orbital transfer requirements, antenna primary beam n, and attitude control requirements.

  5. Computer-aided design system with artificial intelligence for automatic dimensioning

    SciTech Connect

    Huang, R.; Juricic, D.

    1995-12-31

    This paper is concerned with the methodology applicable to automating computer drafting tasks of a Computer-Aided Drafting and Design (CADD) system. One of the main characteristics of these tasks is the need for interaction with geometric models and their features. The specific drafting task considered in this paper was dimensioning of a multiview drawing. The paper illustrates the approach used and describes the introduction of relevant knowledge base as well as implementation of an inference engine internal to the drafting system. A simple class of objects was used to illustrate in more details the methods involved. It is noted that developing this methodology may be of vital importance for further automation of the drafting and design process.

  6. A computer-aided design system geared toward conceptual design in a research environment. [for hypersonic vehicles

    NASA Technical Reports Server (NTRS)

    STACK S. H.

    1981-01-01

    A computer-aided design system has recently been developed specifically for the small research group environment. The system is implemented on a Prime 400 minicomputer linked with a CDC 6600 computer. The goal was to assign the minicomputer specific tasks, such as data input and graphics, thereby reserving the large mainframe computer for time-consuming analysis codes. The basic structure of the design system consists of GEMPAK, a computer code that generates detailed configuration geometry from a minimum of input; interface programs that reformat GEMPAK geometry for input to the analysis codes; and utility programs that simplify computer access and data interpretation. The working system has had a large positive impact on the quantity and quality of research performed by the originating group. This paper describes the system, the major factors that contributed to its particular form, and presents examples of its application.

  7. Telerobotic workstation design aid

    NASA Technical Reports Server (NTRS)

    Corker, K.; Hudlicka, E.; Young, D.; Cramer, N.

    1989-01-01

    Telerobot systems are being developed to support a number of space mission applications. In low earth orbit, telerobots and teleoperated manipulators will be used in shuttle operations and space station construction/maintenance. Free flying telerobotic service vehicles will be used at low and geosynchronous orbital operations. Rovers and autonomous vehicles will be equipped with telerobotic devices in planetary exploration. In all of these systems, human operators will interact with the robot system at varied levels during the scheduled operations. The human operators may be in either orbital or ground-based control systems. To assure integrated system development and maximum utility across these systems, designers must be sensitive to the constraints and capabilities that the human brings to system operation and must be assisted in applying these human factors to system development. The simulation and analysis system is intended to serve the needs of system analysis/designers as an integrated workstation in support of telerobotic design.

  8. Basic plan and assessment of an information system designed to aid patient transfer.

    PubMed

    Yamamoto, M; Sano, M

    1987-01-01

    One of the important assignments in the planning of community medical care is to find an effective way of implementing the sharing of facilities together with their coordination. In particular, the establishment of a smooth and effective system co-ordinating facilities and functions of medical organizations, comprising clinics and hospitals of various levels, and the installation of an information system, designed to provide positive assistance in information control as well as in its operation, should be undertaken urgently. In this paper, we discuss the patient-transfer system, which is one of the facility-co-ordination-system for medical organizations, from the point of view of total community medical care. Specifically we describe the purpose, features and total structure of the patient-transfer system, and discuss the basic plan for an information system designed to aid patient transfer, from information control together with an advance assessment from the system-engineering point of view. This research has been promoted by the Aichi Medical Association committee for medical care system. The proposed system is planned to be operational in the near future. PMID:3441155

  9. Cost justification for an interactive Computer-Aided Design Drafting/Manufacturing system

    SciTech Connect

    Norton, F.J.

    1980-09-23

    Many factors influence the capital investment decision. System costs and benefits are weighed by methods of financial analysis to determine the advisability of an investment. Capital, expense, and benefits as related to Interactive Computer-Aided Design Drafting/Manufacturing (CADD/M) Systems are discussed and model calculations are included. An example is treated by the simple payback method and the more sophisticated methods of Net Present Value (NPV) and Internal Rate of Return (IRR). The NPV and IRR approaches include in the calculation the time value of money and provide a sounder foundation on which to base the purchase decision. It is hoped that an understanding of these techniques by technical personnel will make an optimum system purchase more likely.

  10. Modern numerical techniques and software for photo- and thermoemission electron optical systems computer-aided design

    NASA Astrophysics Data System (ADS)

    Monastyrski, Mikhail A.; Andreev, Sergei V.; Gaidukova, Inna S.; Tarasov, Victor A.; Filachev, Anatoly M.

    1997-09-01

    The paper is devoted to software development for simulation, optimization, and computer-aided design of photo/thermo- emission electron optical systems and units. The first part of the paper presents the applied program package (APP) 'ELIMDYNAMICS\\ intended for computer-aided design of dynamic photo-emission image tubes with electro/magnetostatic focusing and deflection (streak tubes). The developed software allows highly precise computation of basic image quality characteristics both in static and streak modes. One of the main advantages of the new program version presented is that 'through' electron beam computation from the photocathode to image receiver is available with regard to dynamic aberrations caused by scattering fields located nearby the edges of deflecting plates. In the second part, the possibility is shown to generalize some numerical techniques being effectively applied in photo-emission imaging electron optics (namely, the (tau) -variation - and the first kind integral equations techniques) to simulation of the thermo-emission electron beam technology units. Functions of the new APP 'CHARGE' are presented, and some numerical aspects of the self-coordinated problem are discussed.

  11. Selection and implementation of a computer aided design and drafting (CAD/D) system

    SciTech Connect

    Davis, J.P.

    1981-01-01

    Faced with very heavy workloads and limited engineering and graphics personnel, Transco opted for a computer-aided design and drafting system that can produce intelligent drawings, which have associated data bases that can be integrated with other graphical and nongraphical data bases to form comprehensive sets of data for construction projects. Because so much time was being spent in all phases of materials and inventory control, Transco decided to integrate materials-management capabilities into the CAD/D system. When a specific item of material is requested on the graphics equipment, the request triggers production of both the drawing and a materials list. Transco plans to extend its computer applications into mapping tasks as well.

  12. Facility management of computer-aided design, drafting/manufacturing systems (CADD/M)

    SciTech Connect

    Norton, F.J.

    1980-09-23

    Interactive Computer-Aided Design Drafting/Manufacturing systems have been installed in thousands of companies, applying CADD/M capabilities to many applications. This has been done with varying degrees of success even among companies with identical applications. Investigation of individual companies reveals a gap between the capabilities of CADD/M systems and the actual usage by industry of those capabilities. This company usage often determines the degree of success or failure of an interactive graphics facility and is largely controlled by management. The responsibilities of the interactive graphics facility managemant team are explained in detail. Proper management of a CADD/M facility is more critical to the success or failure of the facility than any other factor.

  13. Harnessing Polypharmacology with Computer-Aided Drug Design and Systems Biology.

    PubMed

    Wathieu, Henri; Issa, Naiem T; Byers, Stephen W; Dakshanamurthy, Sivanesan

    2016-01-01

    The ascent of polypharmacology in drug development has many implications for disease therapy, most notably in the efforts of drug discovery, drug repositioning, precision medicine and combination therapy. The single- target approach to drug development has encountered difficulties in predicting drugs that are both clinically efficacious and avoid toxicity. By contrast, polypharmacology offers the possibility of a controlled distribution of effects on a biological system. This review addresses possibilities and bottlenecks in the efficient computational application of polypharmacology. The two major areas we address are the discovery and prediction of multiple protein targets using the tools of computer-aided drug design, and the use of these protein targets in predicting therapeutic potential in the context of biological networks. The successful application of polypharmacology to systems biology and pharmacology has the potential to markedly accelerate the pace of development of novel therapies for multiple diseases, and has implications for the intellectual property landscape, likely requiring targeted changes in patent law. PMID:26907947

  14. Experiences in control system design aided by interactive computer programs: temperature control of the laser isotope separation vessel

    SciTech Connect

    Gavel, D.T.; Pittenger, L.C.; McDonald, J.S.; Cramer, P.G.; Herget, C.J.

    1985-01-01

    A robust control system has been designed to regulate temperature in a vacuum vessel. The thermodynamic process is modeled by a set of nonlinear, implicit differential equations. The control design and analysis task exercised many of the computer-aided control systems design software packages, including MATLAB, DELIGHT, and LSAP. The working environment is a VAX computer. Advantages and limitations of the software and environment, and the impact on final controller design is discussed.

  15. NEXUS/NASCAD- NASA ENGINEERING EXTENDIBLE UNIFIED SOFTWARE SYSTEM WITH NASA COMPUTER AIDED DESIGN

    NASA Technical Reports Server (NTRS)

    Purves, L. R.

    1994-01-01

    NEXUS, the NASA Engineering Extendible Unified Software system, is a research set of computer programs designed to support the full sequence of activities encountered in NASA engineering projects. This sequence spans preliminary design, design analysis, detailed design, manufacturing, assembly, and testing. NEXUS primarily addresses the process of prototype engineering, the task of getting a single or small number of copies of a product to work. Prototype engineering is a critical element of large scale industrial production. The time and cost needed to introduce a new product are heavily dependent on two factors: 1) how efficiently required product prototypes can be developed, and 2) how efficiently required production facilities, also a prototype engineering development, can be completed. NEXUS extendibility and unification are achieved by organizing the system as an arbitrarily large set of computer programs accessed in a common manner through a standard user interface. The NEXUS interface is a multipurpose interactive graphics interface called NASCAD (NASA Computer Aided Design). NASCAD can be used to build and display two and three-dimensional geometries, to annotate models with dimension lines, text strings, etc., and to store and retrieve design related information such as names, masses, and power requirements of components used in the design. From the user's standpoint, NASCAD allows the construction, viewing, modification, and other processing of data structures that represent the design. Four basic types of data structures are supported by NASCAD: 1) three-dimensional geometric models of the object being designed, 2) alphanumeric arrays to hold data ranging from numeric scalars to multidimensional arrays of numbers or characters, 3) tabular data sets that provide a relational data base capability, and 4) procedure definitions to combine groups of system commands or other user procedures to create more powerful functions. NASCAD has extensive abilities to

  16. Computer Aided Design in Engineering Education.

    ERIC Educational Resources Information Center

    Gobin, R.

    1986-01-01

    Discusses the use of Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM) systems in an undergraduate engineering education program. Provides a rationale for CAD/CAM use in the already existing engineering program. Describes the methods used in choosing the systems, some initial results, and warnings for first-time users. (TW)

  17. A visual-aided wireless monitoring system design for total hip replacement surgery.

    PubMed

    Chen, Hong; Gao, Jiyang; Su, Shaojie; Zhang, Xu; Wang, Zhihua

    2015-04-01

    To improve the positioning accuracy of implants in Total Hip Replacement (THR) surgeries, a visual-aided wireless monitoring system for THR surgery is proposed in this paper. This system aims to measure and display the contact distribution and relative pose between femoral head and acetabulum prosthesis during the surgery to help surgeons obtain accurate position of implants. The system consists of two parts: the Sensors Array Measuring System (SAMS) and the display part. The SAMS is composed of a sensors array (including contact sensors and an image sensor), signal conditioning circuits, a low power microcontroller (MCU), and a low-power transceiver. The SAMS is designed to estimate the relative pose of femoral head component to acetabular component. The display part processes the data from sensors and demonstrates the contact distribution and the pose of the prothesis during the surgery in 3-D graphics. The two parts of the system communicate with each other on an RF link at the band of 400 MHz. The signal conditioning circuits have been designed and fabricated in 0.18 μm CMOS process. Testing results show that the resolution of the signal conditioning circuits is 60.1 μ Vpp (1.35 g) with ±100 mVpp input. The chip can operate under 1.2-to-3.6 V supply voltage for single battery applications with 116-160 μ A current consumption. The system has been verified by the simulation with rotation quaternion and translation vector. The experimental results show that the contact distribution and relative pose of the two components could be measured and demonstrated in real time. The relative error of rotation is less than 8% and the actual relative error of translation is less than 10%. PMID:25879970

  18. Design, Development, Implementation, and Evaluation of the Computer Aided Interactive Testing System (CAITS). Focus on the Trained Person.

    ERIC Educational Resources Information Center

    1983

    This report describes the design, development, implementation, and evaluation of the Computer Aided Interactive Testing System (CAITS) and addresses the applicability of the system in the Naval Education and Training Command. In addition to an introduction (section one), the report contains four sections and three appendices. Section two describes…

  19. Control of HIV/AIDS infection system with drug dosages design via robust H(∞) fuzzy controller.

    PubMed

    Assawinchaichote, Wudhichai

    2015-01-01

    The designing of H∞ fuzzy controller for HIV/AIDS infected dynamic system has been considered in this paper. With TS fuzzy model and LMIs approach, the proposed controller is obtained for such a system. A set of sufficient conditions of the H∞ controller is given to ensure the closed-loop system asymptotic stability and the prescribed H∞ performance level. Finally, the effectiveness of the fuzzy controller design approach is finally presented through the simulation results. PMID:26405968

  20. NEXUS/NASCAD- NASA ENGINEERING EXTENDIBLE UNIFIED SOFTWARE SYSTEM WITH NASA COMPUTER AIDED DESIGN

    NASA Technical Reports Server (NTRS)

    Purves, L. R.

    1994-01-01

    NEXUS, the NASA Engineering Extendible Unified Software system, is a research set of computer programs designed to support the full sequence of activities encountered in NASA engineering projects. This sequence spans preliminary design, design analysis, detailed design, manufacturing, assembly, and testing. NEXUS primarily addresses the process of prototype engineering, the task of getting a single or small number of copies of a product to work. Prototype engineering is a critical element of large scale industrial production. The time and cost needed to introduce a new product are heavily dependent on two factors: 1) how efficiently required product prototypes can be developed, and 2) how efficiently required production facilities, also a prototype engineering development, can be completed. NEXUS extendibility and unification are achieved by organizing the system as an arbitrarily large set of computer programs accessed in a common manner through a standard user interface. The NEXUS interface is a multipurpose interactive graphics interface called NASCAD (NASA Computer Aided Design). NASCAD can be used to build and display two and three-dimensional geometries, to annotate models with dimension lines, text strings, etc., and to store and retrieve design related information such as names, masses, and power requirements of components used in the design. From the user's standpoint, NASCAD allows the construction, viewing, modification, and other processing of data structures that represent the design. Four basic types of data structures are supported by NASCAD: 1) three-dimensional geometric models of the object being designed, 2) alphanumeric arrays to hold data ranging from numeric scalars to multidimensional arrays of numbers or characters, 3) tabular data sets that provide a relational data base capability, and 4) procedure definitions to combine groups of system commands or other user procedures to create more powerful functions. NASCAD has extensive abilities to

  1. EGRAM- ECHELLE SPECTROGRAPH DESIGN AID

    NASA Technical Reports Server (NTRS)

    Dantzler, A. A.

    1994-01-01

    EGRAM aids in the design of spectrographic systems that utilize an echelle-first order cross disperser combination. This optical combination causes a two dimensional echellogram to fall on a detector. EGRAM describes the echellogram with enough detail to allow the user to effectively judge the feasibility of the spectrograph's design. By iteratively altering system parameters, the desired echellogram can be achieved without making a physical model. EGRAM calculates system parameters which are accurate to the first order and compare favorably to results from ray tracing techniques. The spectrographic system modelled by EGRAM consists of an entrance aperture, collimator, echelle, cross dispersion grating, focusing options, and a detector. The system is assumed to be free of aberrations and the echelle, cross disperser, and detector should be planar. The EGRAM program is menu driven and has a HELP facility. The user is prompted for information such as minimum and maximum wavelengths, slit dimensions, ruling frequencies, detector geometry, and angle of incidence. EGRAM calculates the resolving power and range of order numbers covered by the echellogram. A numerical map is also produced. This tabulates the order number, slit bandpass, and high/middle/low wavelengths. EGRAM can also compute the centroid coordinates of a specific wavelength and order (or vice versa). EGRAM is written for interactive execution and is written in Microsoft BASIC A. It has been implemented on an IBM PC series computer operating under DOS. EGRAM was developed in 1985.

  2. Computer aided airship design

    NASA Technical Reports Server (NTRS)

    Davis, S. J.; Rosenstein, H.

    1975-01-01

    The Comprehensive Airship Sizing and Performance Computer Program (CASCOMP) is described which was developed and used in the design and evaluation of advanced lighter-than-air (LTA) craft. The program defines design details such as engine size and number, component weight buildups, required power, and the physical dimensions of airships which are designed to meet specified mission requirements. The program is used in a comparative parametric evaluation of six advanced lighter-than-air concepts. The results indicate that fully buoyant conventional airships have the lightest gross lift required when designed for speeds less than 100 knots and the partially buoyant concepts are superior above 100 knots. When compared on the basis of specific productivity, which is a measure of the direct operating cost, the partially buoyant lifting body/tilting prop-rotor concept is optimum.

  3. Computer-Aided Design (CAD).

    ERIC Educational Resources Information Center

    Burns, William E.

    1986-01-01

    Discusses the field of computer-aided design, which combines the skills and creativity of the architect, designer, drafter, and engineer with the power of the computer. Reports on job tasks, applications, background of the field, job outlook, and necessary training. (CH)

  4. Computer-aided engineering system for design of sequence arrays and lithographic masks

    DOEpatents

    Hubbell, Earl A.; Lipshutz, Robert J.; Morris, Macdonald S.; Winkler, James L.

    1997-01-01

    An improved set of computer tools for forming arrays. According to one aspect of the invention, a computer system is used to select probes and design the layout of an array of DNA or other polymers with certain beneficial characteristics. According to another aspect of the invention, a computer system uses chip design files to design and/or generate lithographic masks.

  5. Design and implementation of a GPS-aided inertial navigation system for a helicopter UAV

    NASA Astrophysics Data System (ADS)

    Kastelan, David R.

    Helicopter unmanned aerial vehicles (UAVs) benefit from vertical takeoff and landing, hover, low-speed, and cruising flight capabilities. This versatility has the expense of nonlinear, unstable, and underactuated system dynamics. These challenges and numerous potential applications make the helicopter UAV an interesting testbed for nonlinear control. A platform for such development has been established in the Applied Nonlinear Controls Lab (ANCL). A miniature helicopter was augmented with a manual/autonomous takeover system and the ANCL Avionics. This payload contains a global positioning system (GPS) receiver, inertial sensors, and communications and computing hardware. Allan variance analysis of inertial sensor data enabled the derivation of a GPS-aided inertial navigation system that was implemented on the ANCL Avionics. This extended Kalman filter (EKF)-based algorithm estimates vehicle position, velocity, and attitude necessary for system identification tasks and control system feedback. Performance validation of this algorithm was demonstrated in simulation and in experimental ground and flight tests.

  6. CADIS: a kernel approach toward the development of intelligent data-management support for computer-aided design systems

    SciTech Connect

    Landis, D.M.

    1988-01-01

    Design and development of CADIS (Computer Aided Design Information System) is presented. CADIS addresses the data-management needs of Computer Aided Design (CAD) systems by providing a system that overcomes the inherent problems found when using conventional data base management systems (DBMS). Limitations found with other research and development efforts marked for correction include: lack of flexibility in the supported CAD system, separation of the design interaction from data-base interaction, separation of knowledge-base issues from data-management issues, lack of a distinction between a DBMS' implementation of system policy, and a DBMS mechanism to support system policy. A four-level data-base architecture is defined for CADIS. An augmented entity-relationship model (AERM) is also defined that supports the CADIS architecture. This model includes structures developed to specifically overcome limitations found in the use of the more-traditional data model. A definition and manipulation language for the model are defined. Translation rules derived enable the AERM to be translated into an underlying data-base scheme. A proof-of-concept model is presented via the definition and implementation of a system tool, the SARA/IDEAS System Browser.

  7. Research on computer-aided design of modern marine power systems

    NASA Astrophysics Data System (ADS)

    Ding, Dongdong; Zeng, Fanming; Chen, Guojun

    2004-03-01

    To make the MPS (Marine Power System) design process more economical and easier, a new CAD scheme is brought forward which takes much advantage of VR (Virtual Reality) and AI (Artificial Intelligence) technologies. This CAD system can shorten the period of design and reduce the requirements on designers' experience in large scale. And some key issues like the selection of hardware and software of such a system are discussed.

  8. Computer-aided engineering system for design of sequence arrays and lithographic masks

    DOEpatents

    Hubbell, E.A.; Morris, M.S.; Winkler, J.L.

    1996-11-05

    An improved set of computer tools for forming arrays is disclosed. According to one aspect of the invention, a computer system is used to select probes and design the layout of an array of DNA or other polymers with certain beneficial characteristics. According to another aspect of the invention, a computer system uses chip design files to design and/or generate lithographic masks. 14 figs.

  9. Computer-aided engineering system for design of sequence arrays and lithographic masks

    DOEpatents

    Hubbell, E.A.; Lipshutz, R.J.; Morris, M.S.; Winkler, J.L.

    1997-01-14

    An improved set of computer tools for forming arrays is disclosed. According to one aspect of the invention, a computer system is used to select probes and design the layout of an array of DNA or other polymers with certain beneficial characteristics. According to another aspect of the invention, a computer system uses chip design files to design and/or generate lithographic masks. 14 figs.

  10. Computer-aided engineering system for design of sequence arrays and lithographic masks

    DOEpatents

    Hubbell, Earl A.; Morris, MacDonald S.; Winkler, James L.

    1999-01-05

    An improved set of computer tools for forming arrays. According to one aspect of the invention, a computer system (100) is used to select probes and design the layout of an array of DNA or other polymers with certain beneficial characteristics. According to another aspect of the invention, a computer system uses chip design files (104) to design and/or generate lithographic masks (110).

  11. Computer-aided engineering system for design of sequence arrays and lithographic masks

    DOEpatents

    Hubbell, E.A.; Morris, M.S.; Winkler, J.L.

    1999-01-05

    An improved set of computer tools for forming arrays is disclosed. According to one aspect of the invention, a computer system is used to select probes and design the layout of an array of DNA or other polymers with certain beneficial characteristics. According to another aspect of the invention, a computer system uses chip design files to design and/or generate lithographic masks. 14 figs.

  12. Computer-aided engineering system for design of sequence arrays and lithographic masks

    DOEpatents

    Hubbell, Earl A.; Morris, MacDonald S.; Winkler, James L.

    1996-01-01

    An improved set of computer tools for forming arrays. According to one aspect of the invention, a computer system (100) is used to select probes and design the layout of an array of DNA or other polymers with certain beneficial characteristics. According to another aspect of the invention, a computer system uses chip design files (104) to design and/or generate lithographic masks (110).

  13. Design Considerations in Development of Minicomputer-Based Computer Aided Instructional Hardware Systems.

    ERIC Educational Resources Information Center

    Wells, C. H.

    A minicomputer-based computer-assisted instructional (CAI) system was designed at the University of Texas Medical Branch in an attempt to lower both the excessive hardware costs and the inordinate amount of time required for the preparation of each hour of instructional material associated with traditional CAI systems. A prototype system with an…

  14. Computer Code Aids Design Of Wings

    NASA Technical Reports Server (NTRS)

    Carlson, Harry W.; Darden, Christine M.

    1993-01-01

    AERO2S computer code developed to aid design engineers in selection and evaluation of aerodynamically efficient wing/canard and wing/horizontal-tail configurations that includes simple hinged-flap systems. Code rapidly estimates longitudinal aerodynamic characteristics of conceptual airplane lifting-surface arrangements. Developed in FORTRAN V on CDC 6000 computer system, and ported to MS-DOS environment.

  15. Computer-aided drug designing.

    PubMed

    Gore, Mohini; Desai, Neetin S

    2014-01-01

    Computer-aided drug designing has emerged as a cost-effective and rapid tool for the discovery of newer therapeutic agents. Several algorithms have been developed to analyze protein structure and function, to identify interacting ligands, active site residues, and to study protein-ligand interactions, which can eventually lead to the identification of new drugs. In silico drug designing involves identification of the target protein which is responsible for the development of the disease under study. The three-dimensional structure of the protein can be predicted using homology modeling, while molecular docking is applied to study the interaction of a drug molecule with the protein. The best orientation of the ligand-protein docked structure which has overall minimum energy needs to be obtained. In silico methods can be used to identify potential drugs for various diseases. Thus, computer-aided drug designing has become an indispensible and integral part of the drug discovery process. PMID:24870144

  16. Computer program for design and performance analysis of navigation-aid power systems. Program documentation. Volume 1: Software requirements document

    NASA Technical Reports Server (NTRS)

    Goltz, G.; Kaiser, L. M.; Weiner, H.

    1977-01-01

    A computer program has been developed for designing and analyzing the performance of solar array/battery power systems for the U.S. Coast Guard Navigational Aids. This program is called the Design Synthesis/Performance Analysis (DSPA) Computer Program. The basic function of the Design Synthesis portion of the DSPA program is to evaluate functional and economic criteria to provide specifications for viable solar array/battery power systems. The basic function of the Performance Analysis portion of the DSPA program is to simulate the operation of solar array/battery power systems under specific loads and environmental conditions. This document establishes the software requirements for the DSPA computer program, discusses the processing that occurs within the program, and defines the necessary interfaces for operation.

  17. Two and three dimensional systems for computer aided geometric design of aircraft surface and components

    NASA Astrophysics Data System (ADS)

    Aryeh, F.

    1982-01-01

    Three interactive software systems dealing with the computerized definition, storage and handling of aircraft geometric shapes and entities in a multidisciplinary design environment are presented. The systems are operated in an interactive fashion via use of low cost graphic display terminals driven by a remote computer in a time sharing mode. GEODEF is a system for interactive definition of complex aircraft surfaces, GEOBASE is a system for interrogation and manipulation of a computerized aircraft geometry data base, and DOG is a 3-D detailed structural and mechanical part definition system.

  18. Building a computer-aided design capability using a standard time share operating system

    NASA Technical Reports Server (NTRS)

    Sobieszczanski, J.

    1975-01-01

    The paper describes how an integrated system of engineering computer programs can be built using a standard commercially available operating system. The discussion opens with an outline of the auxiliary functions that an operating system can perform for a team of engineers involved in a large and complex task. An example of a specific integrated system is provided to explain how the standard operating system features can be used to organize the programs into a simple and inexpensive but effective system. Applications to an aircraft structural design study are discussed to illustrate the use of an integrated system as a flexible and efficient engineering tool. The discussion concludes with an engineer's assessment of an operating system's capabilities and desirable improvements.

  19. Computer-Aided Design in Further Education.

    ERIC Educational Resources Information Center

    Ingham, Peter, Ed.

    This publication updates the 1982 occasional paper that was intended to foster staff awareness and assist colleges in Great Britain considering the use of computer-aided design (CAD) material in engineering courses. The paper begins by defining CAD and its place in the Integrated Business System with a brief discussion of the effect of CAD on the…

  20. AESOP: A computer-aided design program for linear multivariable control systems

    NASA Technical Reports Server (NTRS)

    Lehtinen, B.; Geyser, L. C.

    1982-01-01

    An interactive computer program (AESOP) which solves quadratic optimal control and is discussed. The program can also be used to perform system analysis calculations such as transient and frequency responses, controllability, observability, etc., in support of the control and filter design computations.

  1. Designing for the home: a comparative study of support aids for central heating systems.

    PubMed

    Sauer, J; Wastell, D G; Schmeink, C

    2009-03-01

    The study examined the influence of different types of enhanced system support on user performance during the management of a central heating system. A computer-based simulation of a central heating system, called CHESS V2.0, was used to model different interface options, providing different support facilities to the user (e.g., historical, predictive, and instructional displays). Seventy-five participants took part in the study and completed a series of operational scenarios under different support conditions. The simulation environment allowed the collection of performance measures (e.g., energy consumption), information sampling, and system control behaviour. Subjective user evaluations of various aspects of the system were also measured. The results showed performance gains for predictive displays whereas no such benefits were observed for the other display types. The data also revealed that status and predictive displays were valued most highly by users. The implications of the findings for designers of central heating systems are discussed. PMID:18433730

  2. An expert system in C for computer-aided digital circuit design

    NASA Astrophysics Data System (ADS)

    Santos, Jorge S.

    1989-06-01

    This thesis effort documents the design, development, implementation, and test of an expert system which decomposes digital circuits into subproblems in order to detect wiring errors, which consist of improperly connected gates, missing connections, and violation of fanout or race conditions. Information needed to connect chips together is viewed as knowledge base information for the expert system. Information such type as number of pins, value of each pin (input, output, power, ground, clock), fanout for a particular type of chip are retrieved from a central database where they are represented. Implementation was done in the C programming language, which although is not design specially for dealing with problems in the Artificial Intelligence (AI) field could be used with success. An integration with a graphics package and a central database was achieved. Tests conducted with the system running in a personal computer Zenith 248 and compatible microcomputers under the Disk Operational System (DOS) version 3.2 proved the portability and efficiency of the expert system. A user's manual is included for the operation of the InterConnect Expert System (ICE).

  3. Aided targeting system simulation evaluation

    NASA Technical Reports Server (NTRS)

    Demaio, Joe; Becker, Curtis

    1994-01-01

    Simulation research was conducted at the Crew Station Research and Development Facility on the effectiveness and ease of use of three targeting systems. A manual system required the aviator to scan a target array area with a simulated second generation forward looking infrared (FLIR) sensor, locate and categorize targets, and construct a target hand-off list. The interface between the aviator and the system was like that of an advanced scout helicopter (manual mode). Two aided systems detected and categorized targets automatically. One system used only the FLIR sensor and the second used FLIR fused with Longbow radar. The interface for both was like that of an advanced scout helicopter aided mode. Exposure time while performing the task was reduced substantially with the aided systems, with no loss of target hand-off list accuracy. The fused sensor system showed lower time to construct the target hand-off list and a slightly lower false alarm rate than the other systems. A number of issues regarding system sensitivity and criterion, and operator interface design are discussed.

  4. An Open Source Rapid Computer Aided Control System Design Toolchain Using Scilab, Scicos and RTAI Linux

    NASA Astrophysics Data System (ADS)

    Bouchpan-Lerust-Juéry, L.

    2007-08-01

    Current and next generation on-board computer systems tend to implement real-time embedded control applications (e.g. Attitude and Orbit Control Subsystem (AOCS), Packet Utililization Standard (PUS), spacecraft autonomy . . . ) which must meet high standards of Reliability and Predictability as well as Safety. All these requirements require a considerable amount of effort and cost for Space Sofware Industry. This paper, in a first part, presents a free Open Source integrated solution to develop RTAI applications from analysis, design, simulation and direct implementation using code generation based on Open Source and in its second part summarises this suggested approach, its results and the conclusion for further work.

  5. Issues of a Computer-Aided Design of Hydraulic Jacks

    NASA Astrophysics Data System (ADS)

    Averchenkov, V. I.; Averchenkov, A. V.; Kolyakinand, V. V.; Orekhov, O. D.

    2016-04-01

    The article deals with the issues of a computer-aided design of hydraulic equipment, namely hydraulic jacks. Design principles of the hydraulic jack CAD system are described. In addition, the possibilities for the system improvement and expansion are considered.

  6. Computer Aided Design of Microwave Front-End Components and Antennas for Ultrawideband Systems

    NASA Astrophysics Data System (ADS)

    Almalkawi, Mohammad J.

    order to maintain high performance of conventional rectangular waveguides in planar form, substrate integrated waveguide (SIW) technology was utilized. A design of single-band dual-mode SIW filters with improved upper stopband performance and a design of dual-band dual mode SIW filters are introduced. Compact evanescent-mode SIW filters are also realized for low frequency applications and for better stopband performance. In addition, a novel tuning solution for planar SIW reconfigurable filters is also presented. Tunablity of the reconfigurable filter is achieved by adjusting dc-magnetic bias applied to the ferrite material. The new tuning technique leads to a dramatic reduction in complexity for the external control system.

  7. Computer-aided design and computer science technology

    NASA Technical Reports Server (NTRS)

    Fulton, R. E.; Voigt, S. J.

    1976-01-01

    A description is presented of computer-aided design requirements and the resulting computer science advances needed to support aerospace design. The aerospace design environment is examined, taking into account problems of data handling and aspects of computer hardware and software. The interactive terminal is normally the primary interface between the computer system and the engineering designer. Attention is given to user aids, interactive design, interactive computations, the characteristics of design information, data management requirements, hardware advancements, and computer science developments.

  8. Compatibility and consistency in display-control systems - Implications for aircraft decision aid design

    NASA Technical Reports Server (NTRS)

    Andre, Anthony D.; Wickens, Christopher D.

    1992-01-01

    In this study we contrast display-control movement relations defined in terms of stimulus-response (physical) compatibility with those defined by stimulus-cognitive compatibility, and we relate these findings to the issue of command versus status levels of decision aid support. A second issue addressed is the cost of inconsistency across multiple display-control mappings. Subjects performed a flight control task while responding to one to four analog indicators, formatted as either command or status displays. The results suggest that there is an advantage for the status format when subjects are required to verbally report the state of the indicator(s), but no advantage was found for either format when subjects were required to manually correct the indicated state. The data point to the importance of display-control consistency and suggest that it may even outweigh that of compatibility.

  9. Integrated computer-aided design using minicomputers

    NASA Technical Reports Server (NTRS)

    Storaasli, O. O.

    1980-01-01

    Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM), a highly interactive software, has been implemented on minicomputers at the NASA Langley Research Center. CAD/CAM software integrates many formerly fragmented programs and procedures into one cohesive system; it also includes finite element modeling and analysis, and has been interfaced via a computer network to a relational data base management system and offline plotting devices on mainframe computers. The CAD/CAM software system requires interactive graphics terminals operating at a minimum of 4800 bits/sec transfer rate to a computer. The system is portable and introduces 'interactive graphics', which permits the creation and modification of models interactively. The CAD/CAM system has already produced designs for a large area space platform, a national transonic facility fan blade, and a laminar flow control wind tunnel model. Besides the design/drafting element analysis capability, CAD/CAM provides options to produce an automatic program tooling code to drive a numerically controlled (N/C) machine. Reductions in time for design, engineering, drawing, finite element modeling, and N/C machining will benefit productivity through reduced costs, fewer errors, and a wider range of configuration.

  10. Geometric modeling for computer aided design

    NASA Technical Reports Server (NTRS)

    Schwing, James L.

    1992-01-01

    The goal was the design and implementation of software to be used in the conceptual design of aerospace vehicles. Several packages and design studies were completed, including two software tools currently used in the conceptual level design of aerospace vehicles. These tools are the Solid Modeling Aerospace Research Tool (SMART) and the Environment for Software Integration and Execution (EASIE). SMART provides conceptual designers with a rapid prototyping capability and additionally provides initial mass property analysis. EASIE provides a set of interactive utilities that simplify the task of building and executing computer aided design systems consisting of diverse, stand alone analysis codes that result in the streamlining of the exchange of data between programs, reducing errors and improving efficiency.

  11. An overview of the computer aided design system for drafting at Sandia National Laboratories, Livermore

    SciTech Connect

    Koopmann, B.E.

    1988-08-01

    Sandia Laboratories Livermore is converting the existing Computervision CADS system to a new hardware and software platform. This report describes the final configuration (after the conversion is completed) and the individual units comparing the system. A background describing the evolution of CADS at SNLL is appended.

  12. The large scale microelectronics Computer-Aided Design and Test (CADAT) system

    NASA Technical Reports Server (NTRS)

    Gould, J. M.

    1978-01-01

    The CADAT system consists of a number of computer programs written in FORTRAN that provide the capability to simulate, lay out, analyze, and create the artwork for large scale microelectronics. The function of each software component of the system is described with references to specific documentation for each software component.

  13. A performance evaluation postprocessor for computer-aided design and analysis of communication systems

    NASA Technical Reports Server (NTRS)

    Tranter, W. H.

    1979-01-01

    A technique for estimating the signal-to-noise ratio at a point in a digital simulation of a communication system is described; the technique is essentially a digital realization of a technique proposed by Shepertycki (1964) for the evaluation of analog communication systems. Signals having lowpass or bandpass spectra may be used. Simulation results show the technique to be accurate over a wide range of signal-to-noise ratios.

  14. Domain specific software design for decision aiding

    NASA Technical Reports Server (NTRS)

    Keller, Kirby; Stanley, Kevin

    1992-01-01

    McDonnell Aircraft Company (MCAIR) is involved in many large multi-discipline design and development efforts of tactical aircraft. These involve a number of design disciplines that must be coordinated to produce an integrated design and a successful product. Our interpretation of a domain specific software design (DSSD) is that of a representation or framework that is specialized to support a limited problem domain. A DSSD is an abstract software design that is shaped by the problem characteristics. This parallels the theme of object-oriented analysis and design of letting the problem model directly drive the design. The DSSD concept extends the notion of software reusability to include representations or frameworks. It supports the entire software life cycle and specifically leads to improved prototyping capability, supports system integration, and promotes reuse of software designs and supporting frameworks. The example presented in this paper is the task network architecture or design which was developed for the MCAIR Pilot's Associate program. The task network concept supported both module development and system integration within the domain of operator decision aiding. It is presented as an instance where a software design exhibited many of the attributes associated with DSSD concept.

  15. Geometric modeling for computer aided design

    NASA Technical Reports Server (NTRS)

    Schwing, James L.; Olariu, Stephen

    1995-01-01

    The primary goal of this grant has been the design and implementation of software to be used in the conceptual design of aerospace vehicles particularly focused on the elements of geometric design, graphical user interfaces, and the interaction of the multitude of software typically used in this engineering environment. This has resulted in the development of several analysis packages and design studies. These include two major software systems currently used in the conceptual level design of aerospace vehicles. These tools are SMART, the Solid Modeling Aerospace Research Tool, and EASIE, the Environment for Software Integration and Execution. Additional software tools were designed and implemented to address the needs of the engineer working in the conceptual design environment. SMART provides conceptual designers with a rapid prototyping capability and several engineering analysis capabilities. In addition, SMART has a carefully engineered user interface that makes it easy to learn and use. Finally, a number of specialty characteristics have been built into SMART which allow it to be used efficiently as a front end geometry processor for other analysis packages. EASIE provides a set of interactive utilities that simplify the task of building and executing computer aided design systems consisting of diverse, stand-alone, analysis codes. Resulting in a streamlining of the exchange of data between programs reducing errors and improving the efficiency. EASIE provides both a methodology and a collection of software tools to ease the task of coordinating engineering design and analysis codes.

  16. Performance evaluation using SYSTID time domain simulation. [computer-aid design and analysis for communication systems

    NASA Technical Reports Server (NTRS)

    Tranter, W. H.; Ziemer, R. E.; Fashano, M. J.

    1975-01-01

    This paper reviews the SYSTID technique for performance evaluation of communication systems using time-domain computer simulation. An example program illustrates the language. The inclusion of both Gaussian and impulse noise models make accurate simulation possible in a wide variety of environments. A very flexible postprocessor makes possible accurate and efficient performance evaluation.

  17. CAESY - COMPUTER AIDED ENGINEERING SYSTEM

    NASA Technical Reports Server (NTRS)

    Wette, M. R.

    1994-01-01

    Many developers of software and algorithms for control system design have recognized that current tools have limits in both flexibility and efficiency. Many forces drive the development of new tools including the desire to make complex system modeling design and analysis easier and the need for quicker turnaround time in analysis and design. Other considerations include the desire to make use of advanced computer architectures to help in control system design, adopt new methodologies in control, and integrate design processes (e.g., structure, control, optics). CAESY was developed to provide a means to evaluate methods for dealing with user needs in computer-aided control system design. It is an interpreter for performing engineering calculations and incorporates features of both Ada and MATLAB. It is designed to be reasonably flexible and powerful. CAESY includes internally defined functions and procedures, as well as user defined ones. Support for matrix calculations is provided in the same manner as MATLAB. However, the development of CAESY is a research project, and while it provides some features which are not found in commercially sold tools, it does not exhibit the robustness that many commercially developed tools provide. CAESY is written in C-language for use on Sun4 series computers running SunOS 4.1.1 and later. The program is designed to optionally use the LAPACK math library. The LAPACK math routines are available through anonymous ftp from research.att.com. CAESY requires 4Mb of RAM for execution. The standard distribution medium is a .25 inch streaming magnetic tape cartridge (QIC-24) in UNIX tar format. CAESY was developed in 1993 and is a copyrighted work with all copyright vested in NASA.

  18. Computer-aided design development transition for IPAD environment

    NASA Technical Reports Server (NTRS)

    Owens, H. G.; Mock, W. D.; Mitchell, J. C.

    1980-01-01

    The relationship of federally sponsored computer-aided design/computer-aided manufacturing (CAD/CAM) programs to the aircraft life cycle design process, an overview of NAAD'S CAD development program, an evaluation of the CAD design process, a discussion of the current computing environment within which NAAD is developing its CAD system, some of the advantages/disadvantages of the NAAD-IPAD approach, and CAD developments during transition into the IPAD system are discussed.

  19. Comparisons of Wilson-Fowler and Parametric Cubic Splines with the Curve-Fitting Algorithms of Several Computer-Aided Design Systems

    SciTech Connect

    Birchler, W.D.; Schilling, S.A.

    2001-02-01

    The purpose of this report is to demonstrate that modern computer-aided design (CAD), computer-aided manufacturing (CAM), and computer-aided engineering (CAE) systems can be used in the Department of Energy (DOE) Nuclear Weapons Complex (NWC) to design new and remodel old products, fabricate old and new parts, and reproduce legacy data within the inspection uncertainty limits. In this study, two two-dimensional splines are compared with several modern CAD curve-fitting modeling algorithms. The first curve-fitting algorithm is called the Wilson-Fowler Spline (WFS), and the second is called a parametric cubic spline (PCS). Modern CAD systems usually utilize either parametric cubic and/or B-splines.

  20. Hearing aid malfunction detection system

    NASA Technical Reports Server (NTRS)

    Kessinger, R. L. (Inventor)

    1977-01-01

    A malfunction detection system for detecting malfunctions in electrical signal processing circuits is disclosed. Malfunctions of a hearing aid in the form of frequency distortion and/or inadequate amplification by the hearing aid amplifier, as well as weakening of the hearing aid power supply are detectable. A test signal is generated and a timed switching circuit periodically applies the test signal to the input of the hearing aid amplifier in place of the input signal from the microphone. The resulting amplifier output is compared with the input test signal used as a reference signal. The hearing aid battery voltage is also periodically compared to a reference voltage. Deviations from the references beyond preset limits cause a warning system to operate.

  1. School District Uses Computer Aided Design and Drafting.

    ERIC Educational Resources Information Center

    Lorentz, Gordon S.

    1988-01-01

    Computer Aided Design and Drafting (CADD) programs are used to teach drafting at an Indiana high school. The school system's maintenance department shared use of the software and equipment to produce original drawings of school buildings. (MLF)

  2. Purchasing Computer-Aided Design Software.

    ERIC Educational Resources Information Center

    Smith, Roger A.

    1992-01-01

    Presents a model for the purchase of computer-aided design (CAD) software: collect general information, observe CAD in use, arrange onsite demonstrations, select CAD software and hardware, and choose a vendor. (JOW)

  3. MOBIC: Designing a Travel Aid for Blind and Elderly People

    NASA Astrophysics Data System (ADS)

    Petrie, Helen; Johnson, Valerie; Strothotte, Thomas; Raab, Andreas; Fritz, Steffi; Michel, Rainer

    This paper presents the research for the development of a new travel aid to increase the independent mobility of blind and elderly travellers. This aid will build on the technologies of geographical information systems (GIS) and the Global Positioning System (GPS). The MOBIC Travel Aid (MOTA) consists of two interrelated components: the MOBIC Pre-journey System (MOPS) to assist users in planning journeys and the MOBIC Outdoor System (MOODS) to execute these plans by providing users with orientation and navigation assistance during journeys. The MOBIC travel aid is complementary to primary mobility aids such as the long cane or guide dog. Results of a study of user requirements are presented and their implications for the initial design of the system are discussed.

  4. Photogrammetry and computer-aided piping design

    SciTech Connect

    Keneflick, J.F.; Chirillo, R.D.

    1985-02-18

    Three-dimensional measurements taken from photographs of a plant model can be digitized and linked with computer-aided piping design. This can short-cut the design and construction of new plants and expedite repair and retrofitting projects. Some designers bridge the gap between model and computer by digitizing from orthographic prints obtained via orthography or the laser scanning of model sections. Such valve or fitting then processed is described in this paper. The marriage of photogrammetry and computer-aided piping design can economically produce such numerical drawings.

  5. Computer-aided software development process design

    NASA Technical Reports Server (NTRS)

    Lin, Chi Y.; Levary, Reuven R.

    1989-01-01

    The authors describe an intelligent tool designed to aid managers of software development projects in planning, managing, and controlling the development process of medium- to large-scale software projects. Its purpose is to reduce uncertainties in the budget, personnel, and schedule planning of software development projects. It is based on dynamic model for the software development and maintenance life-cycle process. This dynamic process is composed of a number of time-varying, interacting developmental phases, each characterized by its intended functions and requirements. System dynamics is used as a modeling methodology. The resulting Software LIfe-Cycle Simulator (SLICS) and the hybrid expert simulation system of which it is a subsystem are described.

  6. Human factors of intelligent computer aided display design

    NASA Technical Reports Server (NTRS)

    Hunt, R. M.

    1985-01-01

    Design concepts for a decision support system being studied at NASA Langley as an aid to visual display unit (VDU) designers are described. Ideally, human factors should be taken into account by VDU designers. In reality, although the human factors database on VDUs is small, such systems must be constantly developed. Human factors are therefore a secondary consideration. An expert system will thus serve mainly in an advisory capacity. Functions can include facilitating the design process by shortening the time to generate and alter drawings, enhancing the capability of breaking design requirements down into simpler functions, and providing visual displays equivalent to the final product. The VDU system could also discriminate, and display the difference, between designer decisions and machine inferences. The system could also aid in analyzing the effects of designer choices on future options and in ennunciating when there are data available on a design selections.

  7. Aids in designing laboratory flumes

    USGS Publications Warehouse

    Williams, Garnett P.

    1971-01-01

    The upsurge of interest in our environment has caused research and instruction in the flow of water along open channels to become increasingly popular in universities and institutes. This, in turn, has brought a greater demand for properly-designed laboratory flumes. Whatever the reason for your interest, designing and building the flume will take a little preparation. You may choose a pattern exactly like a previous design, or you may follow the more time-consuming method of studying several existing flumes and combine the most desirable features of each.

  8. Scaled Ellipses For Computer-Aided Design

    NASA Technical Reports Server (NTRS)

    Schembri, Anthony J.

    1990-01-01

    An addition to CAD-PACK, computer-aided design program, speeds preparation of iosmetric drawings, particularly cutaway views showing bores and threads. Consists of set of 50 scaled ellipses on detail pages of program. Designer selects ellipse, rotates it, and draws feature. Then erases reference lines on video screen.

  9. The design and analysis of simple low speed flap systems with the aid of linearized theory computer programs

    NASA Technical Reports Server (NTRS)

    Carlson, Harry W.

    1985-01-01

    The purpose here is to show how two linearized theory computer programs in combination may be used for the design of low speed wing flap systems capable of high levels of aerodynamic efficiency. A fundamental premise of the study is that high levels of aerodynamic performance for flap systems can be achieved only if the flow about the wing remains predominantly attached. Based on this premise, a wing design program is used to provide idealized attached flow camber surfaces from which candidate flap systems may be derived, and, in a following step, a wing evaluation program is used to provide estimates of the aerodynamic performance of the candidate systems. Design strategies and techniques that may be employed are illustrated through a series of examples. Applicability of the numerical methods to the analysis of a representative flap system (although not a system designed by the process described here) is demonstrated in a comparison with experimental data.

  10. Teaching Computer Aided Architectural Design at UCLA.

    ERIC Educational Resources Information Center

    Mitchell, William J.

    This brief overview includes a rationale for the program and describes course goals and objectives, curriculum content, teaching methods and materials, staffing, and problems of integrating computer aided design with traditional architectural curricula at the School of Architecture and Urban Planning at UCLA. A list of texts for use in teaching…

  11. Simulation as an Aid to Experimental Design.

    ERIC Educational Resources Information Center

    Frazer, Jack W.; And Others

    1983-01-01

    Discusses simulation program to aid in the design of enzyme kinetic experimentation (includes sample runs). Concentration versus time profiles of any subset or all nine states of reactions can be displayed with/without simulated instrumental noise, allowing the user to estimate the practicality of any proposed experiment given known instrument…

  12. Computer-aided design for the generation of test transactions and test data bases and for the benchmarking of parallel, multiple-backend data base systems. Master's thesis

    SciTech Connect

    Fenton, G.P.

    1986-06-01

    The multi-backend data-base system (MBDS) is a research effort conducted jointly by the Naval Postgraduate School and Ohio State University with the sponsorship of the STARS foundation. The MBDS is designed to overcome the capacity growth and performance gain problems of the traditional data-base systems and the single-backend data-base systems. To verify the capacity growth and performance claims, a benchmarking methodology was formulated in the Naval Postgraduate thesis, A Performance Measurement Methodology for Software Multiple-Backend Database Systems by James R. Vincent. This thesis presents the implementation of the methodology in the form of a computer-aided design system for the generation of test data-bases and test-transaction mixes for benchmarking MBDS.

  13. Computer aided coordinate measuring systems

    NASA Astrophysics Data System (ADS)

    Nastri, J. W.

    Sikorsky's computer-aided inspection system and equipment utilized to assure that manufactured parts meet drawing tolerance specifications are discussed. An overview of the system is given, and the software is described, including the monitor console routine and commands and the language commands. The system's three coordinate measuring machines are discussed, and the part inspection methods are described in stepwise fashion. System benefits and time savings items are detailed, including quick and accurate measurement of parts difficult to inspect by conventional methods, significant reduction in inspection time, a consistent baseline that highlights variances, and the use of personnel with lower skill levels to effectively inspect critical parts.

  14. A schema for knowledge representation and its implementation in a computer-aided design and manufacturing system

    SciTech Connect

    Tamir, D.E.

    1989-01-01

    Modularity in the design and implementation of expert systems relies upon cooperation among the expert systems and communication of knowledge between them. A prerequisite for an effective modular approach is some standard for knowledge representation to be used by the developers of the different modules. In this work the author presents a schema for knowledge representation, and apply this schema in the design of a rule-based expert system. He also implements a cooperative expert system using the proposed knowledge representation method. A knowledge representation schema is a formal specification of the internal, conceptual, and external components of a knowledge base, each specified in a separate schema. The internal schema defines the structure of a knowledge base, the conceptual schema defines the concepts, and the external schema formalizes the pragmatics of a knowledge base. The schema is the basis for standardizing knowledge representation systems and it is used in the various phases of design and specification of the knowledge base. A new model of knowledge representation based on a pattern recognition interpretation of implications is developed. This model implements the concept of linguistic variables and can, therefore, emulate human reasoning with linguistic imprecision. The test case for the proposed schema of knowledge representation is a system is a cooperative expert system composed of two expert systems. This system applies a pattern recognition interpretation of a generalized one-variable implication with linguistic variables.

  15. Solving rational matrix equations in the state space with applications to computer-aided control-system design

    NASA Technical Reports Server (NTRS)

    Packard, A. K.; Sastry, S. S.

    1986-01-01

    A method of solving a class of linear matrix equations over various rings is proposed, using results from linear geometric control theory. An algorithm, successfully implemented, is presented, along with non-trivial numerical examples. Applications of the method to the algebraic control system design methodology are discussed.

  16. Geometric modeling for computer aided design

    NASA Technical Reports Server (NTRS)

    Schwing, James L.

    1993-01-01

    Over the past several years, it has been the primary goal of this grant to design and implement software to be used in the conceptual design of aerospace vehicles. The work carried out under this grant was performed jointly with members of the Vehicle Analysis Branch (VAB) of NASA LaRC, Computer Sciences Corp., and Vigyan Corp. This has resulted in the development of several packages and design studies. Primary among these are the interactive geometric modeling tool, the Solid Modeling Aerospace Research Tool (smart), and the integration and execution tools provided by the Environment for Application Software Integration and Execution (EASIE). In addition, it is the purpose of the personnel of this grant to provide consultation in the areas of structural design, algorithm development, and software development and implementation, particularly in the areas of computer aided design, geometric surface representation, and parallel algorithms.

  17. Computer-Aided Design Of Sheet-Material Parts

    NASA Technical Reports Server (NTRS)

    Gilbert, Jeffrey L.; Paternoster, Vincent Y.; Levitt, Maureen L.; Osterloh, Mark R.

    1991-01-01

    Computer-aided-design system partly automates tedious process of designing and guiding assembly of small pieces of flat sheet material into large surfaces that approximate smoothly curved surfaces having complicated three-dimensional shapes. Capability provides for flexibility enabling designer to assess quickly and easily effects of changes in design in making engineering compromises among various sizes and shapes. Saves time and money in both design and fabrication. Used in rocket-engine application and other applications requiring design of sheet-material parts.

  18. On-Line Authoring Aids for Instructional Design.

    ERIC Educational Resources Information Center

    Schulz, Russel E.; And Others

    Since the usefulness of the Interservice Procedures for Instructional Systems Development (IPISD) depends on authoring aids which enable personnel to translate IPISD procedures into instructional products, this project examined the feasibility of providing such "how to do it" guidance for the instructional design and development tasks identified…

  19. An Elective Course on Computer-Aided Process Design.

    ERIC Educational Resources Information Center

    Sommerfeld, Jude T.

    1979-01-01

    Describes an undergraduate chemical engineering course which has been offered at the Georgia Institute of Technology. The objectives, structure, instructional materials and content of this course, which emphasizes the structure and usage of computer-aided design systems, are also included. (HM)

  20. Early & Often: Designing a Comprehensive System of Financial Aid Information. A Report of the Advisory Committee on Student Financial Assistance

    ERIC Educational Resources Information Center

    Advisory Committee on Student Financial Assistance, 2008

    2008-01-01

    Students and parents need ample time and accurate information to prepare for the financial burden of a college education--those who lack this knowledge base face a significant access barrier to higher education. This problem can be countered by the delivery of comprehensive, integrated financial aid information, an approach identified by the…

  1. Physiological modeling for hearing aid design

    NASA Astrophysics Data System (ADS)

    Bruce, Ian C.; Young, Eric D.; Sachs, Murray B.

    2002-05-01

    Physiological data from hearing-impaired cats suggest that conventional hearing aid signal-processing schemes do not restore normal auditory-nerve responses to a vowel [Miller et al., J. Acoust. Soc. Am. 101, 3602 (1997)] and can even produce anomalous and potentially confounding patterns of activity [Schilling et al., Hear. Res. 117, 57 (1998)]. These deficits in the neural representation may account at least partially for poor speech perception in some hearing aid users. An amplification scheme has been developed that produces neural responses to a vowel more like those seen in normal cats and that reduces confounding responses [Miller et al., J. Acoust. Soc. Am. 106, 2693 (1999)]. A physiologically accurate model of the normal and impaired auditory periphery would provide simpler and quicker testing of such potential hearing aid designs. Details of such a model, based on that of Zhang et al. [J. Acoust. Soc. Am. 109, 648 (2001)], will be presented. Model predictions suggest that impairment of both outer- and inner-hair cells contribute to the degraded representation of vowels in hearing-impaired cats. The model is currently being used to develop and test a generalization of the Miller et al. speech-processing algorithm described above to running speech. [Work supported by NIDCD Grants DC00109 and DC00023.] a)Now with the Dept. of Electrical and Computer Engineering, McMaster Univ., 1280 Main St. W., Hamilton, ON L8S 4K1, Canada.

  2. Design of a multi-sensor sonar system for indoor range measurement as a navigational aid for the blind.

    PubMed

    Choudhury, Maroof H; Barreto, Armando

    2003-01-01

    This paper reports the methodology for the design of a sonar-based ranging and guidance system. The intended application of the system is to help a blind person avoid obstacles as he/she navigates his/her environment. Six sonar transceivers are arranged radially on a headgear worn by the user. The transceivers detect discrete range data at discrete-time sampling instances. A panoramic map of the environment is generated from the discrete-space sensory data. The paper emphasizes the challenges faced during the measurement of omnidirectional ranging information in indoor environments. Situations have been identified where erroneous range readings are generated due to channel cross talk caused by echo bouncing off multiple surfaces. Several sonar control and measurement schemes were developed and tested to avoid these situations. The results and performance of these different control schemes are compared in this paper. A microcontroller-based system commands the sonar ping sequences, acquires the echo return times and computes the ranges. The set of range data is transmitted to a PC, which utilizes the information to build a spatialized audio map of the surrounding obstacles. The hardware and software layout for the system are described in this paper. PMID:12724864

  3. Geometric modeling for computer aided design

    NASA Technical Reports Server (NTRS)

    Schwing, James L.

    1988-01-01

    Research focused on two major areas. The first effort addressed the design and implementation of a technique that allows for the visualization of the real time variation of physical properties. The second effort focused on the design and implementation of an on-line help system with components designed for both authors and users of help information.

  4. The Computer Aided Aircraft-design Package (CAAP)

    NASA Technical Reports Server (NTRS)

    Yalif, Guy U.

    1994-01-01

    The preliminary design of an aircraft is a complex, labor-intensive, and creative process. Since the 1970's, many computer programs have been written to help automate preliminary airplane design. Time and resource analyses have identified, 'a substantial decrease in project duration with the introduction of an automated design capability'. Proof-of-concept studies have been completed which establish 'a foundation for a computer-based airframe design capability', Unfortunately, today's design codes exist in many different languages on many, often expensive, hardware platforms. Through the use of a module-based system architecture, the Computer aided Aircraft-design Package (CAAP) will eventually bring together many of the most useful features of existing programs. Through the use of an expert system, it will add an additional feature that could be described as indispensable to entry level engineers and students: the incorporation of 'expert' knowledge into the automated design process.

  5. Aids and the nervous system

    SciTech Connect

    Rosenblum, M.L. ); Levy, R.M. ); Bredesen, D.E. )

    1988-01-01

    This book contains 19 chapters. Some of the titles are: Neuroradiology of acquired immunodeficiency syndrome; The AIDS dementia complex; primary infection with human immunodeficiency virus; The biology of the human immunodeficiency virus and its role in neurological disease; and Algorithms for the treatment of AIDS patients with neurological disease.

  6. Hardware synthesis from DDL. [Digital Design Language for computer aided design and test of LSI

    NASA Technical Reports Server (NTRS)

    Shah, A. M.; Shiva, S. G.

    1981-01-01

    The details of the digital systems can be conveniently input into the design automation system by means of Hardware Description Languages (HDL). The Computer Aided Design and Test (CADAT) system at NASA MSFC is used for the LSI design. The Digital Design Language (DDL) has been selected as HDL for the CADAT System. DDL translator output can be used for the hardware implementation of the digital design. This paper addresses problems of selecting the standard cells from the CADAT standard cell library to realize the logic implied by the DDL description of the system.

  7. Simulation as an aid to experimental design

    SciTech Connect

    Frazer, J.W.; Balaban, D.J.; Wang, J.L.

    1983-05-01

    A simulator of chemical reactions can aid the scientist in the design of experimentation. They are of great value when studying enzymatic kinetic reactions. One such simulator is a numerical ordinary differential equation solver which uses interactive graphics to provide the user with the capability to simulate an extremely wide range of enzyme reaction conditions for many types of single substrate reactions. The concentration vs. time profiles of any subset or all nine states of a complex reaction can be displayed with and without simulated instrumental noise. Thus the user can estimate the practicality of any proposed experimentation given known instrumental noise. The experimenter can readily determine which state provides the most information related to the proposed kinetic parameters and mechanism. A general discussion of the program including the nondimensionalization of the set of differential equations is included. Finally, several simulation examples are shown and the results discussed.

  8. The Design Manager's Aid for Intelligent Decomposition (DeMAID)

    NASA Technical Reports Server (NTRS)

    Rogers, James L.

    1994-01-01

    Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed, the proposed system can be decomposed to identify its hierarchical structure. The design manager's aid for intelligent decomposition (DeMAID) is a knowledge based system for ordering the sequence of modules and identifying a possible multilevel structure for design. Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save considerable money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined.

  9. Adaptation of components of systems for the computer-aided design of radio-electronic equipment (Review)

    NASA Astrophysics Data System (ADS)

    Anisimov, V. I.; Strel'Nikov, Iu. N.

    1989-01-01

    Current problems in the development of interactive CAD systems for radio-electronic equipment are examined, with emphasis on the general-system properties of the adaptive interaction between system components. A formal analysis of CAD processes is carried out with the aim of developing new concepts, architectural solutions, and system-organization requirements. The basic software and hardware elements of expert CAD systems are described, and examples of their realization are presented.

  10. New mechanization equations for aided inertial navigation systems

    NASA Technical Reports Server (NTRS)

    Schmidt, S. F.; Bjorkman, W. S.; Conrad, B.

    1973-01-01

    Inertial navigation equations are developed which use area navigation (RNAV) waypoints and runway references as coodinate centers. The formulation is designed for aided inertial navigation systems and gives a high numerical accuracy through all phases of flight. A new formulation of the error equations for inertial navigation systems is also presented. This new formulation reduces numerical calculations in the use of Kalman filters for aided inertial navigation systems.

  11. Program Aids Analysis And Optimization Of Design

    NASA Technical Reports Server (NTRS)

    Rogers, James L., Jr.; Lamarsh, William J., II

    1994-01-01

    NETS/ PROSSS (NETS Coupled With Programming System for Structural Synthesis) computer program developed to provide system for combining NETS (MSC-21588), neural-network application program and CONMIN (Constrained Function Minimization, ARC-10836), optimization program. Enables user to reach nearly optimal design. Design then used as starting point in normal optimization process, possibly enabling user to converge to optimal solution in significantly fewer iterations. NEWT/PROSSS written in C language and FORTRAN 77.

  12. COMPUTER AIDED CHEMICAL PROCESS DESIGN METHODOLOGIES FOR POLLUTION REDUCTION(SYSTEMS ANALYSIS BRANCH, SUSTAINABLE TECHNOLOGY DIVISION, NRMRL)

    EPA Science Inventory

    The objective of the project is to develop computer optimization and simulation methodologies for the design of economical chemical manufacturing processes with a minimum of impact on the environment. The computer simulation and optimization tools developed in this project can be...

  13. Multidisciplinary Expert-aided Analysis and Design (MEAD)

    NASA Technical Reports Server (NTRS)

    Hummel, Thomas C.; Taylor, James

    1989-01-01

    The MEAD Computer Program (MCP) is being developed under the Multidisciplinary Expert-Aided Analysis and Design (MEAD) Project as a CAD environment in which integrated flight, propulsion, and structural control systems can be designed and analyzed. The MCP has several embedded computer-aided control engineering (CACE) packages, a user interface (UI), a supervisor, a data-base manager (DBM), and an expert system (ES). The supervisor monitors and coordinates the operation of the CACE packages, the DBM; the ES, and the UI. The DBM tracks the control design process. Models created or installed by the MCP are tracked by date and version, and results are associated with the specific model version with which they were generated. The ES is used to relieve the control engineer from tedious and cumbersome tasks in the iterative design process. The UI provides the capability for a novice as well as an expert to utilize the MCP easily and effectively. The MCP version 2(MCP-2.0) is fully developed for flight control system design and analysis. Propulsion system modeling, analysis, and simulation is also supported; the same is true for structural models represented in state-space form. The ultimate goal is to cover the integration of flight, propulsion, and structural control engineering, including all discipline-specific functionality and interfaces. The current MCP-2.0 components and functionality are discussed.

  14. Computer aided system engineering for space construction

    NASA Technical Reports Server (NTRS)

    Racheli, Ugo

    1989-01-01

    This viewgraph presentation covers the following topics. Construction activities envisioned for the assembly of large platforms in space (as well as interplanetary spacecraft and bases on extraterrestrial surfaces) require computational tools that exceed the capability of conventional construction management programs. The Center for Space Construction is investigating the requirements for new computational tools and, at the same time, suggesting the expansion of graduate and undergraduate curricula to include proficiency in Computer Aided Engineering (CAE) though design courses and individual or team projects in advanced space systems design. In the center's research, special emphasis is placed on problems of constructability and of the interruptability of planned activity sequences to be carried out by crews operating under hostile environmental conditions. The departure point for the planned work is the acquisition of the MCAE I-DEAS software, developed by the Structural Dynamics Research Corporation (SDRC), and its expansion to the level of capability denoted by the acronym IDEAS**2 currently used for configuration maintenance on Space Station Freedom. In addition to improving proficiency in the use of I-DEAS and IDEAS**2, it is contemplated that new software modules will be developed to expand the architecture of IDEAS**2. Such modules will deal with those analyses that require the integration of a space platform's configuration with a breakdown of planned construction activities and with a failure modes analysis to support computer aided system engineering (CASE) applied to space construction.

  15. Collaborative prototyping approaches for ICU decision aid design.

    PubMed

    Ehrhart, L S; Hanson, C W; Marshall, B E; Marshall, C; Medsker, C

    1999-01-01

    When computer-based aids do not support the human users' decision-making strategies or anticipate the organizational impacts of technological change, advances in information technology may degrade rather than enhance decision-making performance. Such failures suggest the design of human-computer cooperation for problem solving and decision-making must be driven by human cognitive and organizational process requirements rather than computer technology. Decision- and user-centered development techniques involve domain experts and end-users in the earliest phases of design to evolve an understanding of requirements through iterative prototyping. This paper presents a collaborative approach to cognitive systems engineering applied to developing a clinical aid to assist respiratory care in the surgical ICU. PMID:10566460

  16. Memory interface simulator: A computer design aid

    NASA Technical Reports Server (NTRS)

    Taylor, D. S.; Williams, T.; Weatherbee, J. E.

    1972-01-01

    Results are presented of a study conducted with a digital simulation model being used in the design of the Automatically Reconfigurable Modular Multiprocessor System (ARMMS), a candidate computer system for future manned and unmanned space missions. The model simulates the activity involved as instructions are fetched from random access memory for execution in one of the system central processing units. A series of model runs measured instruction execution time under various assumptions pertaining to the CPU's and the interface between the CPU's and RAM. Design tradeoffs are presented in the following areas: Bus widths, CPU microprogram read only memory cycle time, multiple instruction fetch, and instruction mix.

  17. Engineering Technology Programs Courses Guide for Computer Aided Design and Computer Aided Manufacturing.

    ERIC Educational Resources Information Center

    Georgia Univ., Athens. Div. of Vocational Education.

    This guide describes the requirements for courses in computer-aided design and computer-aided manufacturing (CAD/CAM) that are part of engineering technology programs conducted in vocational-technical schools in Georgia. The guide is organized in five sections. The first section provides a rationale for occupations in design and in production,…

  18. Information and computer-aided system for structural materials

    NASA Astrophysics Data System (ADS)

    Nekrashevitch, Ju. G.; Nizametdinov, Sh. U.; Polkovnikov, A. V.; Rumjantzev, V. P.; Surina, O. N.; Kalinin, G. M.; Sidorenkov, A. V.; Strebkov, Ju. S.

    1992-09-01

    An information and computer-aided system for structural materials data has been developed to provide data for the fusion and fission reactor system design. It is designed for designers, industrial engineers, and material science specialists and provides a friendly interface in an interactive mode. The database for structural materials contains the master files: chemical composition, physical, mechanical, corrosion, technological properties, regulatory and technical documentation. The system is implemented on a PC/AT running the PS/2 operating system.

  19. Design and development of computer-aided chemical systems: virtual labs for teaching chemical experiments in undergraduate and graduate courses.

    PubMed

    Luque Ruiz, I; López Espinosa, E; Cerruela García, G; Gómez-Nieto, M A

    2001-01-01

    An environment for the construction of virtual chemistry experiments is presented. This environment is based on the E(V) = M + m model-Experiment (Virtual) = Materials + method-proposed and described herein, which allows the representation and subsequent building of chemistry experiments in virtual 3D worlds to any degree of complexity. The object-based nature of the environment not only allows its use on the Internet but also facilitates integration with other systems, while enabling the system to represent and organize knowledge in such a way that it is available to any teaching environment dealing with chemical laboratory experiments. PMID:11500127

  20. Advances in computer-aided design and computer-aided manufacture technology.

    PubMed

    Calamia, J R

    1996-01-01

    Although the development of computer-aided design (CAD) and computer-aided manufacture (CAM) technology and the benefits of increased productivity became obvious in the automobile and aerospace industries in the 1970s, investigations of this technology's application in the field of dentistry did not begin until the 1980s. Only now are we beginning to see the fruits of this work with the commercial availability of some systems; the potential for this technology seems boundless. This article reviews the recent literature with emphasis on the period from June 1992 to May 1993. This review should familiarize the reader with some of the latest developments in this technology, including a brief description of some systems currently available and the clinical and economical rationale for their acceptance into the dental mainstream. This article concentrates on a particular system, the Cerec (Siemens/Pelton and Crane, Charlotte, NC) system, for three reasons: First, this system has been available since 1985 and, as a result, has a track record of almost 7 years of data. Most of the data have just recently been released and consequently, much of this year's literature on CAD-CAM is monopolized by studies using this system. Second, this system was developed as a mobile, affordable, direct chairside CAD-CAM restorative method. As such, it is of special interest to the patient, providing a one-visit restoration. Third, the author is currently engaged in research using this particular system and has a working knowledge of this system's capabilities. PMID:9462062

  1. Computer Aided Design: Instructional Manual. The North Dakota High Technology Mobile Laboratory Project.

    ERIC Educational Resources Information Center

    Cheng, Wan-Lee

    This instructional manual contains 12 learning activity packets for use in a workshop in computer-aided design and drafting (CADD). The lessons cover the following topics: introduction to computer graphics and computer-aided design/drafting; coordinate systems; advance space graphics hardware configuration and basic features of the IBM PC…

  2. Computer-aided design for metabolic engineering.

    PubMed

    Fernández-Castané, Alfred; Fehér, Tamás; Carbonell, Pablo; Pauthenier, Cyrille; Faulon, Jean-Loup

    2014-12-20

    The development and application of biotechnology-based strategies has had a great socio-economical impact and is likely to play a crucial role in the foundation of more sustainable and efficient industrial processes. Within biotechnology, metabolic engineering aims at the directed improvement of cellular properties, often with the goal of synthesizing a target chemical compound. The use of computer-aided design (CAD) tools, along with the continuously emerging advanced genetic engineering techniques have allowed metabolic engineering to broaden and streamline the process of heterologous compound-production. In this work, we review the CAD tools available for metabolic engineering with an emphasis, on retrosynthesis methodologies. Recent advances in genetic engineering strategies for pathway implementation and optimization are also reviewed as well as a range of bionalytical tools to validate in silico predictions. A case study applying retrosynthesis is presented as an experimental verification of the output from Retropath, the first complete automated computational pipeline applicable to metabolic engineering. Applying this CAD pipeline, together with genetic reassembly and optimization of culture conditions led to improved production of the plant flavonoid pinocembrin. Coupling CAD tools with advanced genetic engineering strategies and bioprocess optimization is crucial for enhanced product yields and will be of great value for the development of non-natural products through sustainable biotechnological processes. PMID:24704607

  3. Expert system prototype of food aid distribution.

    PubMed

    Singh, Neeta

    2007-01-01

    The aim of this study was to improve efficiency of the food aid distribution process of international food relief organizations. An overall objective of this study was to develop a prototype expert system for monitoring and evaluating food aid by international disaster relief organizations. The research identifies data related to monitoring and evaluation processes of various international food-aid organizations. It then applies an artificial intelligence-based expert system to develop a prototype for those processes. Existing data related to monitoring and evaluation program cycles were obtained. An expert system shell called CLIPS(c) (National Aeronautics Space Administration) was used to develop a prototype system named Food Aid Monitor, a rule-based expert system, which uses facts and heuristic rules to provide an adaptive feedback regarding monitoring and evaluating processes at various stages of food aid operation. The Food Aid Monitor was evaluated and validated by three expert panels checking the prototype system for completeness, relevancy, consistency, correctness, precision, and use-ability. Finally, the panels indicated a belief that the system could have an overall positive impact on the stages of monitoring and evaluating food aid processes of the food relief organizations. PMID:17392088

  4. Design analysis and computer-aided performance evaluation of shuttle orbiter electrical power system. Volume 1: Summary

    NASA Technical Reports Server (NTRS)

    1974-01-01

    Studies were conducted to develop appropriate space shuttle electrical power distribution and control (EPDC) subsystem simulation models and to apply the computer simulations to systems analysis of the EPDC. A previously developed software program (SYSTID) was adapted for this purpose. The following objectives were attained: (1) significant enhancement of the SYSTID time domain simulation software, (2) generation of functionally useful shuttle EPDC element models, and (3) illustrative simulation results in the analysis of EPDC performance, under the conditions of fault, current pulse injection due to lightning, and circuit protection sizing and reaction times.

  5. The ergonomics of computer aided design within advanced manufacturing technology.

    PubMed

    John, P A

    1988-03-01

    Many manufacturing companies have now awakened to the significance of computer aided design (CAD), although the majority of them have only been able to purchase computerised draughting systems of which only a subset produce direct manufacturing data. Such companies are moving steadily towards the concept of computer integrated manufacture (CIM), and this demands CAD to address more than draughting. CAD architects are thus having to rethink the basic specification of such systems, although they typically suffer from an insufficient understanding of the design task and have consequently been working with inadequate specifications. It is at this fundamental level that ergonomics has much to offer, making its contribution by encouraging user-centred design. The discussion considers the relationships between CAD and: the design task; the organisation and people; creativity; and artificial intelligence. It finishes with a summary of the contribution of ergonomics. PMID:15676646

  6. Evolution of Geometric Sensitivity Derivatives from Computer Aided Design Models

    NASA Technical Reports Server (NTRS)

    Jones, William T.; Lazzara, David; Haimes, Robert

    2010-01-01

    The generation of design parameter sensitivity derivatives is required for gradient-based optimization. Such sensitivity derivatives are elusive at best when working with geometry defined within the solid modeling context of Computer-Aided Design (CAD) systems. Solid modeling CAD systems are often proprietary and always complex, thereby necessitating ad hoc procedures to infer parameter sensitivity. A new perspective is presented that makes direct use of the hierarchical associativity of CAD features to trace their evolution and thereby track design parameter sensitivity. In contrast to ad hoc methods, this method provides a more concise procedure following the model design intent and determining the sensitivity of CAD geometry directly to its respective defining parameters.

  7. Comparison of the marginal fit of different coping materials and designs produced by computer aided manufacturing systems.

    PubMed

    Karataşli, Ozge; Kursoğlu, Pinar; Capa, Nuray; Kazazoğlu, Ender

    2011-01-01

    In this study, marginal adaptations of different copings fabricated with CAD/CAM or MAD/CAM were analysed. Celay and Zirkonzahn groups were fabricated by MAD/CAM, LAVA and DC-Zircon groups were fabricated by CAD/CAM. Casting metal copings were used as the control group. An implant abutment that was embedded in octagonal acrylic block was used to prepare the copings. Sixteen previously established points were marked and the measurements were performed with the stereomicroscope (at × 150). The marginal fit of the samples were evaluated by calculating the mean measurements of each 16 points. The statistical analysis was performed by Tukey multiple comparisons test at 95% confidence interval. The groups can be summarized as follows in terms of marginal gap, from the lowest to highest: LAVA (24.6 ± 14.0 µm)systems may not be the most important factor for marginal adaptation. PMID:21282881

  8. A Conceptual Design of a Departure Planner Decision Aid

    NASA Technical Reports Server (NTRS)

    Anagnostakis, Ioannis; Idris, Husni R.; Clark, John-Paul; Feron, Eric; Hansman, R. John; Odoni, Amedeo R.; Hall, William D.

    2000-01-01

    Terminal area Air Traffic Management handles both arriving and departing traffic. To date, research work on terminal area operations has focused primarily on the arrival flow and typically departures are taken into account only in an approximate manner. However, arrivals and departures are highly coupled processes especially in the terminal airspace, with complex interactions and sharing of the same airport resources between arrivals and departures taking place in practically every important terminal area. Therefore, the addition of automation aids for departures, possibly in co-operation with existing arrival flow automation systems, could have a profound contribution in enhancing the overall efficiency of airport operations. This paper presents the conceptual system architecture for such an automation aid, the Departure Planner (DP). This architecture can be used as a core in the development of decision-aiding systems to assist air traffic controllers in improving the performance of departure operations and optimize runway time allocation among different operations at major congested airports. The design of such systems is expected to increase the overall efficiency of terminal area operations and yield benefits for all stakeholders involved in Air Traffic Management (ATM) operations, users as well as service providers.

  9. A Complete Interactive Graphical Computer-Aided Instruction System.

    ERIC Educational Resources Information Center

    Abrams, Steven Selby

    The use of interactive graphics in computer-aided instruction systems is discussed with emphasis placed on two requirements of such a system. The first is the need to provide the teacher with a useful tool with which to design and modify teaching sessions tailored to the individual needs and capabilities of the students. The second is the…

  10. Accelerating Battery Design Using Computer-Aided Engineering Tools: Preprint

    SciTech Connect

    Pesaran, A.; Heon, G. H.; Smith, K.

    2011-01-01

    Computer-aided engineering (CAE) is a proven pathway, especially in the automotive industry, to improve performance by resolving the relevant physics in complex systems, shortening the product development design cycle, thus reducing cost, and providing an efficient way to evaluate parameters for robust designs. Academic models include the relevant physics details, but neglect engineering complexities. Industry models include the relevant macroscopic geometry and system conditions, but simplify the fundamental physics too much. Most of the CAE battery tools for in-house use are custom model codes and require expert users. There is a need to make these battery modeling and design tools more accessible to end users such as battery developers, pack integrators, and vehicle makers. Developing integrated and physics-based CAE battery tools can reduce the design, build, test, break, re-design, re-build, and re-test cycle and help lower costs. NREL has been involved in developing various models to predict the thermal and electrochemical performance of large-format cells and has used in commercial three-dimensional finite-element analysis and computational fluid dynamics to study battery pack thermal issues. These NREL cell and pack design tools can be integrated to help support the automotive industry and to accelerate battery design.

  11. Advances in computer-aided design and computer-aided manufacture technology.

    PubMed

    Calamia, J R

    1994-01-01

    Although the development of computer-aided design (CAD) and computer-aided manufacture (CAM) technology and the benefits of increased productivity became obvious in the automobile and aerospace industries in the 1970s, investigations of this technology's application in the field of dentistry did not begin until the 1980s. Only now are we beginning to see the fruits of this work with the commercial availability of some systems; the potential for this technology seems boundless. This article reviews the recent literature with emphasis on the period from June 1992 to May 1993. This review should familiarize the reader with some of the latest developments in this technology, including a brief description of some systems currently available and the clinical and economical rationale for their acceptance into the dental mainstream. This article concentrates on a particular system, the Cerec (Siemens/Pelton and Crane, Charlotte, NC) system, for three reasons: first, this system has been available since 1985 and, as a result, has a track record of almost 7 years of data. Most of the data have just recently been released and consequently, much of this year's literature on CAD-CAM is monopolized by studies using this system. Second, this system was developed as a mobile, affordable, direct chairside CAD-CAM restorative method. As such, it is of special interest to the dentist who will offer this new technology directly to the patient, providing a one-visit restoration. Third, the author is currently engaged in research using this particular system and has a working knowledge of this system's capabilities. PMID:8032444

  12. A computer aided engineering tool for ECLS systems

    NASA Technical Reports Server (NTRS)

    Bangham, Michal E.; Reuter, James L.

    1987-01-01

    The Computer-Aided Systems Engineering and Analysis tool used by NASA for environmental control and life support system design studies is capable of simulating atmospheric revitalization systems, water recovery and management systems, and single-phase active thermal control systems. The designer/analysis interface used is graphics-based, and allows the designer to build a model by constructing a schematic of the system under consideration. Data management functions are performed, and the program is translated into a format that is compatible with the solution routines.

  13. Critiquing the Computer-Aided Design of Dental Prostheses.

    ERIC Educational Resources Information Center

    Fitzpatrick, F. J.; And Others

    This paper describes RaPiD, a computer-aided assistant for the design of dental prostheses called removable partial dentures. The user manipulates icons directly to indicate the desired design solution to a given clinical situation. A developing design is represented as a logic database of components in a design; expert rules are applied as…

  14. Office of Student Financial Aid Quality Improvement Program: Design and Implementation Plan.

    ERIC Educational Resources Information Center

    Advanced Technology, Inc., Reston, VA.

    The purpose and direction of the quality improvement program of the U.S. Department of Education's Office of Student Financial Aid (OSFA) are described. The improvement program was designed to develop a systematic approach to identify, measure, and correct errors in the student aid delivery system. Information is provided on the general approach…

  15. NASA's online machine aided indexing system

    NASA Technical Reports Server (NTRS)

    Silvester, June P.; Genuardi, Michael T.; Klingbiel, Paul H.

    1993-01-01

    This report describes the NASA Lexical Dictionary, a machine aided indexing system used online at the National Aeronautics and Space Administration's Center for Aerospace Information (CASI). This system is comprised of a text processor that is based on the computational, non-syntactic analysis of input text, and an extensive 'knowledge base' that serves to recognize and translate text-extracted concepts. The structure and function of the various NLD system components are described in detail. Methods used for the development of the knowledge base are discussed. Particular attention is given to a statistically-based text analysis program that provides the knowledge base developer with a list of concept-specific phrases extracted from large textual corpora. Production and quality benefits resulting from the integration of machine aided indexing at CASI are discussed along with a number of secondary applications of NLD-derived systems including on-line spell checking and machine aided lexicography.

  16. From paper drawings to computer-aided design

    NASA Astrophysics Data System (ADS)

    Karima, M.; Sadhal, K. S.; McNeil, T. O.

    1985-02-01

    The benefits of a fully integrated computer-aided design and drafting system (CADDS) database are today very well accepted by industry, and major engineering companies implementing CADDS are confronted with the gigantic task of entering the existing multidisciplinary engineering information into the CADDS database. The present investigation is concerned with the findings of a feasibility study which had been conducted by a Canadian company to explore data capture on engineering drawings. A review of the state of the art in digitization is presented, and attention is given to specific problems arising in the case of the Canadian company. It is found that substantial advancements have been made toward the automatic 'reading' of existing drawings on paper media. However, no system exists currently which fully automates the data capturing process in the engineering environment and generates intelligent databases for use by CADD systems. Suitable approaches for 'data capture' under the given conditions are discussed.

  17. Computational Thermodynamics Aided High-Entropy Alloy Design

    NASA Astrophysics Data System (ADS)

    Zhang, Chuan; Zhang, Fan; Chen, Shuanglin; Cao, Weisheng

    2012-07-01

    Thermodynamic calculation is used to shed light on the design and development of high-entropy alloys (HEAs) in this article. A thermodynamic database for the Al-Co-Cr-Fe-Ni was developed, and phase diagrams of this system were calculated. The calculated results, such as primary solidified phases, which are fractions of stable phases at a given alloy composition, explain the published experimental observations fairly well for both as-cast and homogenized alloys. These calculations also confirm the effect of each element on the face-centered cubic (fcc)/body-centered cubic (bcc) structure transition as published in the literature. The role of thermodynamic calculation in aiding effective design of HEAs is clearly demonstrated by this work.

  18. Visual display aid for orbital maneuvering - Design considerations

    NASA Technical Reports Server (NTRS)

    Grunwald, Arthur J.; Ellis, Stephen R.

    1993-01-01

    This paper describes the development of an interactive proximity operations planning system that allows on-site planning of fuel-efficient multiburn maneuvers in a potential multispacecraft environment. Although this display system most directly assists planning by providing visual feedback to aid visualization of the trajectories and constraints, its most significant features include: (1) the use of an 'inverse dynamics' algorithm that removes control nonlinearities facing the operator, and (2) a trajectory planning technique that separates, through a 'geometric spreadsheet', the normally coupled complex problems of planning orbital maneuvers and allows solution by an iterative sequence of simple independent actions. The visual feedback of trajectory shapes and operational constraints, provided by user-transparent and continuously active background computations, allows the operator to make fast, iterative design changes that rapidly converge to fuel-efficient solutions. The planning tool provides an example of operator-assisted optimization of nonlinear cost functions.

  19. Computer aided microbial safety design of food processes.

    PubMed

    Schellekens, M; Martens, T; Roberts, T A; Mackey, B M; Nicolaï, B M; Van Impe, J F; De Baerdemaeker, J

    1994-12-01

    To reduce the time required for product development, to avoid expensive experimental tests, and to quantify safety risks for fresh products and the consequence of processing there is a growing interest in computer aided food process design. This paper discusses the application of hybrid object-oriented and rule-based expert system technology to represent the data and knowledge of microbial experts and food engineers. Finite element models for heat transfer calculation routines, microbial growth and inactivation models and texture kinetics are combined with food composition data, thermophysical properties, process steps and expert knowledge on type and quantity of microbial contamination. A prototype system has been developed to evaluate changes in food composition, process steps and process parameters on microbiological safety and textual quality of foods. PMID:7703003

  20. Direction discriminating hearing aid system

    NASA Technical Reports Server (NTRS)

    Jhabvala, M.; Lin, H. C.; Ward, G.

    1991-01-01

    A visual display was developed for people with substantial hearing loss in either one or both ears. The system consists of three discreet units; an eyeglass assembly for the visual display of the origin or direction of sounds; a stationary general purpose noise alarm; and a noise seeker wand.

  1. AIDS Infects Education Systems in Africa

    ERIC Educational Resources Information Center

    Keller, Bess

    2005-01-01

    The AIDS pandemic raging across sub-Saharan Africa does not stop with personal carnage. It also threatens whole systems, including what is arguably the most critical for the region's future--education. Where rates of HIV infection are high, as they are in much of southern and eastern Africa, experts warn, the effects on social stability and…

  2. Computer Program Aids Design Of Impeller Blades

    NASA Technical Reports Server (NTRS)

    Chen, Wei-Chung; Galazin, John V.

    1992-01-01

    Impeller blades for centrifugal turbopumps designed quickly with help of computer program. Generates blade contours and continually subjects them to evaluation. Checks physical parameters to ensure they are compatible with required performance and recycles design if criteria not met. Program written for centrifugal turbomachinery, also adapted to such axial pump components as inducer blades and stator vanes.

  3. A noncontacting motion monitoring system for an astronaut translation aid

    NASA Astrophysics Data System (ADS)

    Finley, Tom D.

    1990-04-01

    The development of a noncontacting motion sensing system designed to monitor the movement of a cart along a track in the low earth orbit space environment is described. The system uses Hall effect sensors to detect the position of small permanent magnets located along the track. The measurement criteria are described, the system design is discussed, and estimates of the system error are given. The system will be used on the Crew and Equipment Translation Aid (CETA) experiment scheduled for the STS37 flight in November 1990. It will allow the position, velocity, and acceleration of the cart to be determined as it moves along the track.

  4. A noncontacting motion monitoring system for an astronaut translation aid

    NASA Technical Reports Server (NTRS)

    Finley, Tom D.

    1990-01-01

    The development of a noncontacting motion sensing system designed to monitor the movement of a cart along a track in the low earth orbit space environment is described. The system uses Hall effect sensors to detect the position of small permanent magnets located along the track. The measurement criteria are described, the system design is discussed, and estimates of the system error are given. The system will be used on the Crew and Equipment Translation Aid (CETA) experiment scheduled for the STS37 flight in November 1990. It will allow the position, velocity, and acceleration of the cart to be determined as it moves along the track.

  5. The polar phase response property of monopolar ECG voltages using a Computer-Aided Design and Drafting (CAD)-based data acquisition system.

    PubMed

    Goswami, B; Mitra, M; Nag, B; Mitra, T K

    1993-11-01

    The present paper discusses a Computer-Aided Design and Drafting (CAD) based data acquisition and polar phase response study of the ECG. The scalar ECG does not show vector properties although such properties are embedded in it. In the present paper the polar phase response property of monopolar chest lead (V1 to V6) ECG voltages has been studied. A software tool has been used to evaluate the relative phase response of ECG voltages. The data acquisition of monopolar ECG records of chest leads V1 to V6 from the chart recorder has been done with the help of the AutoCAD application package. The spin harmonic constituents of ECG voltages are evaluated at each harmonic plane and the polar phase responses are studied at each plane. Some interesting results have been observed in some typical cases which are discussed in the paper. PMID:8307653

  6. Expert system aid for military finance

    SciTech Connect

    Morris, J.D.; Emrich, M.L.; Hwang, Ho-Ling; Meador, M.

    1987-09-14

    Historically, budget preparation processes have been difficult to accomplish. Errors and inconsistencies cause problems for the analyst during budget review. This paper discusses the development and testing of an expert system to aid budget preparation. The prototyping tool, its capabilities, and their application are discussed. Shown are the pilot testing procedures and their role in system development. Current status and enhancements (including software updates and future testing) are also presented. 12 refs., 3 figs.

  7. A digital patient for computer-aided prosthesis design

    PubMed Central

    Colombo, Giorgio; Facoetti, Giancarlo; Rizzi, Caterina

    2013-01-01

    This article concerns the design of lower limb prosthesis, both below and above knee. It describes a new computer-based design framework and a digital model of the patient around which the prosthesis is designed and tested in a completely virtual environment. The virtual model of the patient is the backbone of the whole system, and it is based on a biomechanical general-purpose model customized with the patient's characteristics (e.g. anthropometric measures). The software platform adopts computer-aided and knowledge-guided approaches with the goal of replacing the current development process, mainly hand made, with a virtual one. It provides the prosthetics with a set of tools to design, configure and test the prosthesis and comprehends two main environments: the prosthesis modelling laboratory and the virtual testing laboratory. The first permits the three-dimensional model of the prosthesis to be configured and generated, while the second allows the prosthetics to virtually set up the artificial leg and simulate the patient's postures and movements, validating its functionality and configuration. General architecture and modelling/simulation tools for the platform are described as well as main aspects and results of the experimentation. PMID:24427528

  8. Design of Training Aids and Devices.

    ERIC Educational Resources Information Center

    Lumsdaine, Arthur A.

    Training devices should be designed to provide efficient learning conditions, especially guided practice and prompt feedback. These devices can be more useful than their operational equipment counterparts because they facilitate the focusing of learner attention on particular components of a total operation, they make operations visible for study,…

  9. Computer Aided Design in the Classroom.

    ERIC Educational Resources Information Center

    Duelm, Brian Lee

    Estimates calling for 1.2 million computer-assisted design (CAD) operator positions to be available by 1990 have prompted educational institutions throughout the country to incorporate instruction in CAD into their industrial arts curricula. Therefore, the question for schools is not whether to buy but rather what to buy. An effective strategy for…

  10. AUV-aided Seafloor Geodetic Observation System

    NASA Astrophysics Data System (ADS)

    Mochizuki, M.; Asada, A.; Ura, T.; Fujita, M.; Colombo, O. L.; Sato, M.; Matsumoto, Y.; Tanaka, T.; Zheng, H.; Nagahashi, K.

    2007-12-01

    We launched a project supported by the Japan Society for the Science Promotion as the Grants in Aid for Scientific Research. In this project, we are aiming at developing new-generation seafloor geodetic observation system that conquers difficulties inherent with the current system. Central idea of this project is to utilize techniques of underwater robot (Autonomous Underwater Vehicle) and seafloor platform to make measurements in place of using the research vessels. Combination of underwater robot and seafloor platform make it possible to conduct the observation with selecting favorable condition of sea and GPS satellite distributions, to make much more frequent observations and to enable flexible planning of observation in response to sudden geodetic events. Trial model of the on-board and the seafloor units were finished. Space-saving design for the on-board unit, which controls both acoustic ranging system and GPS, was one of big issues to be overcome. We reviewed the current system configuration and made it simple. It was miniaturized, and then it was put into two cylinders. The cylinder No.1 contains the PHINS (IXSEA), an inertial navigation system based on fiber optic gyroscope technology. Another one, the cylinder No.2, contains the SF-2050M (NAVCOM Technology) GPS receiver and the acoustic ranging units. The original chassis of the SF-2050M was removed to minimize the volume of the unit and then only the electrical boards of the GPS receiver was installed into the cylinder No.2. There is no commercialized GPS antenna that can receive both L1 and L2 signals and has pressure capability of 2,000 m depth in the sea. Then we developed the pressure housing for the GPS antenna. The small size antenna corresponding to the L1 and L2 signals was installed in it. The transducer, for underwater acoustic ranging, employed on both the on-board and the seafloor units has been newly developed by Dr. Tom Ensign, Engineering acoustic Inc.. This transducer has a spherical

  11. 23 CFR 470.107 - Federal-aid highway systems.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 23 Highways 1 2014-04-01 2014-04-01 false Federal-aid highway systems. 470.107 Section 470.107 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PLANNING AND RESEARCH HIGHWAY SYSTEMS Federal-aid Highway Systems § 470.107 Federal-aid highway systems. (a) Interstate System. (1) The Dwight...

  12. 23 CFR 470.107 - Federal-aid highway systems.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Federal-aid highway systems. 470.107 Section 470.107 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PLANNING AND RESEARCH HIGHWAY SYSTEMS Federal-aid Highway Systems § 470.107 Federal-aid highway systems. (a) Interstate System. (1) The Dwight...

  13. 23 CFR 470.107 - Federal-aid highway systems.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 23 Highways 1 2011-04-01 2011-04-01 false Federal-aid highway systems. 470.107 Section 470.107 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PLANNING AND RESEARCH HIGHWAY SYSTEMS Federal-aid Highway Systems § 470.107 Federal-aid highway systems. (a) Interstate System. (1) The Dwight...

  14. 23 CFR 470.107 - Federal-aid highway systems.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 23 Highways 1 2012-04-01 2012-04-01 false Federal-aid highway systems. 470.107 Section 470.107 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PLANNING AND RESEARCH HIGHWAY SYSTEMS Federal-aid Highway Systems § 470.107 Federal-aid highway systems. (a) Interstate System. (1) The Dwight...

  15. 23 CFR 470.107 - Federal-aid highway systems.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 23 Highways 1 2013-04-01 2013-04-01 false Federal-aid highway systems. 470.107 Section 470.107 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PLANNING AND RESEARCH HIGHWAY SYSTEMS Federal-aid Highway Systems § 470.107 Federal-aid highway systems. (a) Interstate System. (1) The Dwight...

  16. Computer aided design study of hypermixing nozzles

    NASA Technical Reports Server (NTRS)

    Mefferd, L. A.; Bevilacqua, P. M.

    1979-01-01

    The development of a nozzle which combines the hypermixing and lobe mechanisms to achieve further increases in jet entrainment and ejector performance is investigated. A computer program which incorporates a two equation turbulence model and is used to predict and compare the evolution of jets from various nozzle designs is discussed. Increasing the length of the nozzle lobes and an alternating lobe nozzle are a methods examined for increasing the entrainment rate.

  17. Computer-aided surface representation and design

    NASA Technical Reports Server (NTRS)

    Barnhill, R. E.

    1984-01-01

    New methods for representing and approximating three and four dimensional surfaces were created. These schemes are the core of our forthcoming Surface Software Package. Surfaces are understood adequately only through the use of dynamic computer graphics; therefore, graphics capability is also included. The numerous applications of surface methods include modeling physical phenomena (e.g., combustion) and designing objects (e.g., airplanes and cars).

  18. SMSaúde: Design, Development, and Implementation of a Remote/Mobile Patient Management System to Improve Retention in Care for HIV/AIDS and Tuberculosis Patients

    PubMed Central

    2015-01-01

    Background The widespread and low cost of mobile phones and the convenience of short message service (SMS) text messaging suggest potential suitability for use with alternative strategies for supporting retention in care and adherence to the treatment of various chronic diseases, such as HIV and tuberculosis (TB). Despite the growing body of literature reporting positive outcomes of SMS text message-based communication with patients, there is yet very little research about the integration of communication technologies and electronic medical records or electronic patient tracking systems. Objective To design, develop, and implement an integrated mobile phone text messaging system used to follow up with patients with HIV and TB in treatment in Mozambique. Methods Following the design science research methodology, we developed a Web-based system that provides support to patients. A case study involving three health care sites in Mozambique was a basis for discussing design issues for this kind of system. We used brainstorming techniques to solicit usability requirements, focus group meetings to discuss and define system architecture, and prototyping to test in real environments and to improve the system. Results We found six sets of system requirements that need to be addressed for success: data collection, telecommunication costs, privacy and data security, text message content, connectivity, and system scalability. A text messaging system was designed and implemented in three health facilities. These sites feed data into a central data repository, which can be used for analysis of operations and decision support. Based on the treatment schedule, the system automatically sent SMS text message appointment reminders, medication reminders, as well as motivational and educational messages to patients enrolled in antiretroviral therapy and TB treatment programs. Conclusions We successfully defined the requirements for, designed, and implemented a mobile phone text

  19. Current insights into computer-aided immunotherapeutic design strategies.

    PubMed

    Cai, Zhi; Zhang, Guoyin; Zhang, Xuejin; Liu, Yan; Fu, Xiaojing

    2015-09-01

    Drug designing costs as well as design of immunotherapeutic agents could be nearly halved through the involvement of computer-aided drug designing methods in discovery and research. The inter-disciplinary, time-, and money-consuming process of drug discovery is amended by the development of drug designing, the technique of creating or finding a molecule that can render stimulatory or inhibitory activity upon various biological organisms. Meanwhile, the advancements made within this scientific domain in the last couple of decades have significantly modified and affected the way new bioactive molecules have been produced by the pharmaceutical industry. In this regard, improvements made in hardware solutions and computational techniques along with their efficient integration with biological processes have revolutionized the in silico methods in speeding up the lead identification and optimization processes. In this review, we will discuss various methods of recent computer-aided drug designing techniques that forms the basis of modern day drug discovery projects. PMID:26091813

  20. Current topics in computer-aided drug design.

    PubMed

    Taft, Carlton A; Da Silva, Vinicius Barreto; Da Silva, Carlos Henrique Tomich De Paula

    2008-03-01

    The addition of computer-aided drug design (CADD) technologies to the research and drug discovery approaches could lead to a reduction of up to 50% in the cost of drug design. Designing a drug is the process of finding or creating a molecule which has a specific activity on a biological organism. Development and drug discovery is a time-consuming, expensive, and interdisciplinary process whereas scientific advancements during the past two decades have altered the way pharmaceutical research produces new bioactive molecules. Advances in computational techniques and hardware solutions have enabled in silico methods to speed up lead optimization and identification. We will review current topics in computer-aided molecular design underscoring some of the most recent approaches and interdisciplinary processes. We will discuss some of the most efficient pathways and design. PMID:18214973

  1. Rapid Geometry Creation for Computer-Aided Engineering Parametric Analyses: A Case Study Using ComGeom2 for Launch Abort System Design

    NASA Technical Reports Server (NTRS)

    Hawke, Veronica; Gage, Peter; Manning, Ted

    2007-01-01

    ComGeom2, a tool developed to generate Common Geometry representation for multidisciplinary analysis, has been used to create a large set of geometries for use in a design study requiring analysis by two computational codes. This paper describes the process used to generate the large number of configurations and suggests ways to further automate the process and make it more efficient for future studies. The design geometry for this study is the launch abort system of the NASA Crew Launch Vehicle.

  2. National Occupational Skill Standards. CADD: Computer Aided Drafting and Design.

    ERIC Educational Resources Information Center

    National Coalition for Advanced Manufacturing, Washington, DC.

    This document identifies computer-aided drafting and design (CADD) skills that companies require of training programs and future employees. The information was developed by two committees of technically knowledgeable CADD users from across the United States and validated by several hundred other CADD users. The skills are aimed at a beginner CADD…

  3. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (MACINTOSH VERSION)

    NASA Technical Reports Server (NTRS)

    Rogers, J. L.

    1994-01-01

    Many engineering systems are large and multi-disciplinary. Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed the proposed system can be decomposed to identify its hierarchical structure. DeMAID (A Design Manager's Aid for Intelligent Decomposition) is a knowledge-based system for ordering the sequence of modules and identifying a possible multilevel structure for the design problem. DeMAID displays the modules in an N x N matrix format (called a design structure matrix) where a module is any process that requires input and generates an output. (Modules which generate an output but do not require an input, such as an initialization process, are also acceptable.) Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save a considerable amount of money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined. The decomposition of a complex design system into subsystems requires the judgement of the design manager. DeMAID reorders and groups the modules based on the links (interactions) among the modules, helping the design manager make decomposition decisions early in the design cycle. The modules are grouped into circuits (the subsystems) and displayed in an N x N matrix format. Feedback links, which indicate an iterative process, are minimized and only occur within a subsystem. Since there are no feedback links among the circuits, the circuits can be displayed in a multilevel format. Thus, a large amount of information is reduced to one or two displays which are stored for later retrieval and modification. The design manager and leaders of the design teams then have a visual display of the design problem and the intricate interactions among the different modules. The design manager could save a substantial

  4. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (SUN VERSION)

    NASA Technical Reports Server (NTRS)

    Rogers, J. L.

    1994-01-01

    Many engineering systems are large and multi-disciplinary. Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed the proposed system can be decomposed to identify its hierarchical structure. DeMAID (A Design Manager's Aid for Intelligent Decomposition) is a knowledge-based system for ordering the sequence of modules and identifying a possible multilevel structure for the design problem. DeMAID displays the modules in an N x N matrix format (called a design structure matrix) where a module is any process that requires input and generates an output. (Modules which generate an output but do not require an input, such as an initialization process, are also acceptable.) Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save a considerable amount of money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined. The decomposition of a complex design system into subsystems requires the judgement of the design manager. DeMAID reorders and groups the modules based on the links (interactions) among the modules, helping the design manager make decomposition decisions early in the design cycle. The modules are grouped into circuits (the subsystems) and displayed in an N x N matrix format. Feedback links, which indicate an iterative process, are minimized and only occur within a subsystem. Since there are no feedback links among the circuits, the circuits can be displayed in a multilevel format. Thus, a large amount of information is reduced to one or two displays which are stored for later retrieval and modification. The design manager and leaders of the design teams then have a visual display of the design problem and the intricate interactions among the different modules. The design manager could save a substantial

  5. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (MACINTOSH VERSION)

    NASA Technical Reports Server (NTRS)

    Rogers, J. L.

    1994-01-01

    Many engineering systems are large and multi-disciplinary. Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed the proposed system can be decomposed to identify its hierarchical structure. DeMAID (A Design Manager's Aid for Intelligent Decomposition) is a knowledge-based system for ordering the sequence of modules and identifying a possible multilevel structure for the design problem. DeMAID displays the modules in an N x N matrix format (called a design structure matrix) where a module is any process that requires input and generates an output. (Modules which generate an output but do not require an input, such as an initialization process, are also acceptable.) Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save a considerable amount of money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined. The decomposition of a complex design system into subsystems requires the judgement of the design manager. DeMAID reorders and groups the modules based on the links (interactions) among the modules, helping the design manager make decomposition decisions early in the design cycle. The modules are grouped into circuits (the subsystems) and displayed in an N x N matrix format. Feedback links, which indicate an iterative process, are minimized and only occur within a subsystem. Since there are no feedback links among the circuits, the circuits can be displayed in a multilevel format. Thus, a large amount of information is reduced to one or two displays which are stored for later retrieval and modification. The design manager and leaders of the design teams then have a visual display of the design problem and the intricate interactions among the different modules. The design manager could save a substantial

  6. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (SUN VERSION)

    NASA Technical Reports Server (NTRS)

    Rogers, J. L.

    1994-01-01

    Many engineering systems are large and multi-disciplinary. Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed the proposed system can be decomposed to identify its hierarchical structure. DeMAID (A Design Manager's Aid for Intelligent Decomposition) is a knowledge-based system for ordering the sequence of modules and identifying a possible multilevel structure for the design problem. DeMAID displays the modules in an N x N matrix format (called a design structure matrix) where a module is any process that requires input and generates an output. (Modules which generate an output but do not require an input, such as an initialization process, are also acceptable.) Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save a considerable amount of money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined. The decomposition of a complex design system into subsystems requires the judgement of the design manager. DeMAID reorders and groups the modules based on the links (interactions) among the modules, helping the design manager make decomposition decisions early in the design cycle. The modules are grouped into circuits (the subsystems) and displayed in an N x N matrix format. Feedback links, which indicate an iterative process, are minimized and only occur within a subsystem. Since there are no feedback links among the circuits, the circuits can be displayed in a multilevel format. Thus, a large amount of information is reduced to one or two displays which are stored for later retrieval and modification. The design manager and leaders of the design teams then have a visual display of the design problem and the intricate interactions among the different modules. The design manager could save a substantial

  7. Analysis and design of a 10 to 30 kW grid-connected solar power system for the JPL fire station and first aid station

    NASA Technical Reports Server (NTRS)

    Josephs, R. H.

    1982-01-01

    The design and performance of a modestly sized utility-connected power conditioning system and its supporting photovoltaic collector are described and estimated. Utility preparations and guidelines to conform with the output of a small generating station with that of a large power network are examined.

  8. SNL Mechanical Computer Aided Design (MCAD) guide 2007.

    SciTech Connect

    Moore, Brandon; Pollice, Stephanie L.; Martinez, Jack R.

    2007-12-01

    This document is considered a mechanical design best-practice guide to new and experienced designers alike. The contents consist of topics related to using Computer Aided Design (CAD) software, performing basic analyses, and using configuration management. The details specific to a particular topic have been leveraged against existing Product Realization Standard (PRS) and Technical Business Practice (TBP) requirements while maintaining alignment with sound engineering and design practices. This document is to be considered dynamic in that subsequent updates will be reflected in the main title, and each update will be published on an annual basis.

  9. Models of Human Information Requirements: "When Reasonable Aiding Systems Disagree"

    NASA Technical Reports Server (NTRS)

    Corker, Kevin; Pisanich, Gregory; Shafto, Michael (Technical Monitor)

    1994-01-01

    Aircraft flight management and Air Traffic Control (ATC) automation are under development to maximize the economy of flight and to increase the capacity of the terminal area airspace while maintaining levels of flight safety equal to or better than current system performance. These goals are being realized by the introduction of flight management automation aiding and operations support systems on the flight deck and by new developments of ATC aiding systems that seek to optimize scheduling of aircraft while potentially reducing required separation and accounting for weather and wake vortex turbulence. Aiding systems on both the flight deck and the ground operate through algorithmic functions on models of the aircraft and of the airspace. These models may differ from each other as a result of variations in their models of the immediate environment. The resultant flight operations or ATC commands may differ in their response requirements (e.g. different preferred descent speeds or descent initiation points). The human operators in the system must then interact with the automation to reconcile differences and resolve conflicts. We have developed a model of human performance including cognitive functions (decision-making, rule-based reasoning, procedural interruption recovery and forgetting) that supports analysis of the information requirements for resolution of flight aiding and ATC conflicts. The model represents multiple individuals in the flight crew and in ATC. The model is supported in simulation on a Silicon Graphics' workstation using Allegro Lisp. Design guidelines for aviation automation aiding systems have been developed using the model's specification of information and team procedural requirements. Empirical data on flight deck operations from full-mission flight simulation are provided to support the model's predictions. The paper describes the model, its development and implementation, the simulation test of the model predictions, and the empirical

  10. Adaptive environment classification system for hearing aids.

    PubMed

    Lamarche, Luc; Giguère, Christian; Gueaieb, Wail; Aboulnasr, Tyseer; Othman, Hisham

    2010-05-01

    An adaptive sound classification framework is proposed for hearing aid applications. The long-term goal is to develop fully trainable instruments in which both the acoustical environments encountered in daily life and the hearing aid settings preferred by the user in each environmental class could be learned. Two adaptive classifiers are described, one based on minimum distance clustering and one on Bayesian classification. Through unsupervised learning, the adaptive systems allow classes to split or merge based on changes in the ongoing acoustical environments. Performance was evaluated using real-world sounds from a wide range of acoustical environments. The systems were first initialized using two classes, speech and noise, followed by a testing period when a third class, music, was introduced. Both systems were successful in detecting the presence of an additional class and estimating its underlying parameters, reaching a testing accuracy close to the target rates obtained from best-case scenarios derived from non-adaptive supervised versions of the classifiers (about 3% lower performance). The adaptive Bayesian classifier resulted in a 4% higher overall accuracy upon splitting adaptation than the minimum distance classifier. Merging accuracy was found to be the same in the two systems and within 1%-2% of the best-case supervised versions. PMID:21117761

  11. EHF SATCOM system design

    NASA Astrophysics Data System (ADS)

    Ahmed, M. Jamil

    Future satellite systems will differ considerably from the current versions. The impetus for change is a result of the need for more capacity, wider bandwidth requirements for enhanced services, increasing demand for mobile communications, advances in technology, developments in satellite payload systems, and a demand for secure military communications. To a large extent all of these needs can be satisfied by the use of extremely high frequency satellite communication (EHF Satcom) systems. EHF Satcom system design, features, pros and cons of using the system, particularly for military applications, and the current status of EHF SATCOM in Canada, U.S., Europe, and Japan are examined. The demand for bandwidth will continue to increase due to the growth of communication as well as due to enhanced services for business and entertainment. The increased bandwidth needs will be met by operating at higher frequencies, and perhaps by using extremely high frequency/superhigh frequency (EHF/SHF) satellites. Design of such systems involves a consideration of numerous aspects of design, technology, cost, and services. Advances in technology will make EHF/SHF systems feasible for military applications, as well as commercial mobile terminals, and high data rate terminals. The use of higher frequencies and small antennas will aid mobile communications. On-board processing will be akin to putting a switch in the space, providing flexibility of rates, connectivity, and services.

  12. Using the Computer in Systems Engineering Design

    ERIC Educational Resources Information Center

    Schmidt, W.

    1970-01-01

    With the aid of the programmed computer, the systems designer can analyze systems for which certain components have not yet been manufactured or even invented, and the power of solution-technique is greatly increased. (IR)

  13. An Author Management System and Other Computer-Based Aids to ISD.

    ERIC Educational Resources Information Center

    O'Neal, A. F.

    A brief review of some of the more important needs imposed by current and projected Department of Defense training problems is followed by descriptions of such automated aids as the LAMPS MARK III Weapons System and the Air Force's F-16 Instructional System Development (ISD) effort. These aids have been designed and developed in response to the…

  14. Modeling And Simulation Of Bar Code Scanners Using Computer Aided Design Software

    NASA Astrophysics Data System (ADS)

    Hellekson, Ron; Campbell, Scott

    1988-06-01

    Many optical systems have demanding requirements to package the system in a small 3 dimensional space. The use of computer graphic tools can be a tremendous aid to the designer in analyzing the optical problems created by smaller and less costly systems. The Spectra Physics grocery store bar code scanner employs an especially complex 3 dimensional scan pattern to read bar code labels. By using a specially written program which interfaces with a computer aided design system, we have simulated many of the functions of this complex optical system. In this paper we will illustrate how a recent version of the scanner has been designed. We will discuss the use of computer graphics in the design process including interactive tweaking of the scan pattern, analysis of collected light, analysis of the scan pattern density, and analysis of the manufacturing tolerances used to build the scanner.

  15. A Design for a Model College Financial Aid Office.

    ERIC Educational Resources Information Center

    VanDusen, William D.; O'Hearne, John J.

    Much of the information used in this report on a model college financial aid office prepared for the Coordinating Board, Texas College and University System, was obtained from a survey conducted in 1965-66 by the Bureau of Applied Social Research of Columbia University. As part of the survey, questionnaires were sent to directors of financial aid…

  16. Computer aided design of multi-phase switched reluctance motor

    NASA Astrophysics Data System (ADS)

    Sheth, N. K.; Rajagopal, K. R.

    2005-05-01

    In this paper, a comprehensive computer-aided design (CAD) procedure of multiphase switched reluctance motor (SRM) is presented. Better approach for calculation of the outer dimensions, phase inductance, flux linkage and losses, and also a different concept for calculating the average torque of the motor are incorporated in the CAD program. The average torque is calculated based on the most effective 15° (for 8/6 SRM) of the static torque profile of the motor. A sample design of a 5hp SRM is presented in detail and the design is validated by conducting a two-dimensional finite element analysis of the motor.

  17. Computer-aided design of polymers and composites

    NASA Technical Reports Server (NTRS)

    Kaelble, D. H.

    1985-01-01

    This book on computer-aided design of polymers and composites introduces and discusses the subject from the viewpoint of atomic and molecular models. Thus, the origins of stiffness, strength, extensibility, and fracture toughness in composite materials can be analyzed directly in terms of chemical composition and molecular structure. Aspects of polymer composite reliability are considered along with characterization techniques for composite reliability, relations between atomic and molecular properties, computer aided design and manufacture, polymer CAD/CAM models, and composite CAD/CAM models. Attention is given to multiphase structural adhesives, fibrous composite reliability, metal joint reliability, polymer physical states and transitions, chemical quality assurance, processability testing, cure monitoring and management, nondestructive evaluation (NDE), surface NDE, elementary properties, ionic-covalent bonding, molecular analysis, acid-base interactions, the manufacturing science, and peel mechanics.

  18. Computer-aided design of antenna structures and components

    NASA Technical Reports Server (NTRS)

    Levy, R.

    1976-01-01

    This paper discusses computer-aided design procedures for antenna reflector structures and related components. The primary design aid is a computer program that establishes cross sectional sizes of the structural members by an optimality criterion. Alternative types of deflection-dependent objectives can be selected for designs subject to constraints on structure weight. The computer program has a special-purpose formulation to design structures of the type frequently used for antenna construction. These structures, in common with many in other areas of application, are represented by analytical models that employ only the three translational degrees of freedom at each node. The special-purpose construction of the program, however, permits coding and data management simplifications that provide advantages in problem size and execution speed. Size and speed are essentially governed by the requirements of structural analysis and are relatively unaffected by the added requirements of design. Computation times to execute several design/analysis cycles are comparable to the times required by general-purpose programs for a single analysis cycle. Examples in the paper illustrate effective design improvement for structures with several thousand degrees of freedom and within reasonable computing times.

  19. Computer-aided conceptual design of Air Cushion Vehicles

    NASA Astrophysics Data System (ADS)

    Band, E. G. U.; Lavis, D. R.

    This paper describes the development and use of a computer-aided design tool which has been used to explore preferred options for amphibious Air-Cushion Vehicle (ACV) and Surface-Effect Ship (SES) designs in support of U.S. Navy and U.S. Army programs. The tool, referred to as the ACV Design Synthesis Model (ADSM), is an interactive computer program which provides a description of feasible ACV or SES concepts that could be developed, by a competent design team, to perform the mission described by the input parameters. The paper discusses how the program was used to explore parametrically the design of a range of self-propelled hoverbarges to meet requirements of the U.S. Army Logistics Over the Shore (LOTS) phases of an amphibious landing. Examples of results are presented to illustrate the method used in determining design and performance trade-offs.

  20. Integration of computer-aided design and manufacturing through artificial-intelligence-based process planning

    SciTech Connect

    Arunthavanathan, V.

    1988-01-01

    The research effort reported in this thesis is directed towards the integration of design, process planning, and manufacturing. The principal notion used in system integration through information integration. The main outcome of this research effort is an artificial-intelligence-based computer-aided generative process planning system, which would use a feature-based symbolic geometry as its input. The feature-based symbolic data structure is used as the common data between design, process planning, and manufacturing. As the commercial computer-aided design systems would not generate a feature-based data base, special interfaces are designed and used. As part of the solution strategy, a module to analyze the symbolic geometry from a global perspective is developed. This module imitates a human process planner and derives some overall assertions. The enhanced geometry data is then used by a rule-based expert system to develop the process plan.

  1. The development of a spreadsheet-aided-engineering design tool for parachutes

    SciTech Connect

    Waye, D.E.; Whinery, L.D.

    1997-04-01

    A spreadsheet-aided engineering design tool has been developed to assist in the parachute design process. The new tool was developed during FY96 and utilized in the design of the flight termination parachute system for a 1900 lb. payload. Many modifications were made during the initial utilization of this tool. Work on the tool continues as the authors attempt to create an application tool for the parachute engineer.

  2. A computer aided design procedure for generating gear teeth

    NASA Technical Reports Server (NTRS)

    Chang, S. H.; Huston, R. L.; Coy, J. J.

    1984-01-01

    A procedure for computer aided design (CAD) of gear teeth is presented. It is developed for generated teeth fabricated by a hob cutter or a shaper. It provides a means for analytically and numerically determining the tooth profile, given the cutter profile. An illustrative example with involute tooth profiles is given. Application with non-standard profiles and with bevel, spiral bevel, and hypoid gears is discussed.

  3. Computer-Aided Design of a Sulfate Encapsulating Receptor

    SciTech Connect

    Custelcean, Radu; Bosano, Jerome J; Bonnesen, Peter V; Kertesz, Vilmos; Hay, Benjamin

    2009-01-01

    A promising new approach towards more efficient self-assembled cage receptors through computer-aided design is demonstrated. The resulting M{sub 4}L{sub 6} tetrahedral cage, internally functionalized with accurately positioned urea hydrogen-bonding groups (see structure; yellow: predicted, blue: experimental, space-filling: SO{sub 4}{sup 2-}), proved to be a remarkably strong sulfate receptor in water.

  4. The theory, design, and operation of the suppressed carrier data-aided tracking receiver

    NASA Technical Reports Server (NTRS)

    Simon, M. K.; Springett, J. C.

    1973-01-01

    A viable, efficient, and easily mechanized carrier regenerating receiver for use in suppressed carrier-tracking system is described. The receiver referred to as a data-aided receiver (DAR) incorporates a data-aided loop (DAL) which provides the required carrier reference signal. The DAL employs the principle of decision feedback and as such is more efficient than other forms of suppressed carrier-tracking loops. The analysis, design, and implementation of the DAR are covered in detail. Performance comparisons and mechanization tradeoffs are made, wherever possible, with discrete carrier systems and other suppressed carrier systems presently in use. Experimental performance verification is given throughout in support of the theory presented.

  5. The ethical design of an AIDS vaccine trial in Africa.

    PubMed

    Christakis, N A

    1988-01-01

    In 1987 in Zaire, a French investigator and a small group of Zairians were immunized with a French investigational AIDS vaccine. This action leads to questioning whether different sociocultural settings should have different research ethics applied, especially on pandemic diseases. Another question is to clarify the valid reasons for conducting an AIDS trial in Africa. The design of an AIDS vaccine trial should vary with the ethical and cultural factors of the research population involved, even if the epidemiological and scientific factors are the same worldwide. In Africa, study subjects meet the requirements for AIDS research: They are free from HIV infection and are at risk for the infection. However, concerns center on how to keep the subjects free from risks during the 6 months between HIV tests and how to ensure laboratory test accuracy. The applicability of the findings to that population are essential, although they may be unique to Africa. Research subjects must consent to participating in the trial and must be advised of their antibody status and of their becoming seropositive. To increase the beneficent treatment of subjects and decrease the risks, the study size should be increased and all participants should be counseled to avoid risky behaviors. A subject's family or social group may need to give consent in addition to the subject, because of cultural views. The explanation of the research must be in culturally relevant terms. Africa should have fair access to the vaccine resulting from the research. PMID:3397278

  6. Assessment of Chair-side Computer-Aided Design and Computer-Aided Manufacturing Restorations: A Review of the Literature

    PubMed Central

    Baroudi, Kusai; Ibraheem, Shukran Nasser

    2015-01-01

    Background: This paper aimed to evaluate the application of computer-aided design and computer-aided manufacturing (CAD-CAM) technology and the factors that affect the survival of restorations. Materials and Methods: A thorough literature search using PubMed, Medline, Embase, Science Direct, Wiley Online Library and Grey literature were performed from the year 2004 up to June 2014. Only relevant research was considered. Results: The use of chair-side CAD/CAM systems is promising in all dental branches in terms of minimizing time and effort made by dentists, technicians and patients for restoring and maintaining patient oral function and aesthetic, while providing high quality outcome. Conclusion: The way of producing and placing the restorations made with the chair-side CAD/CAM (CEREC and E4D) devices is better than restorations made by conventional laboratory procedures. PMID:25954082

  7. The CSS Guide to Implementing Financial Aid Data Processing Systems.

    ERIC Educational Resources Information Center

    Van Dusen, William D.; And Others

    The College Scholarship Service guide to implementing financial aid data processing systems is presented, based on conferences that promoted information exchange between data processing and financial aid administrators. The following topics are addressed: long-range planning, the rationale and organizational basis for financial aid, specific…

  8. Computer aided design of computer generated holograms for electron beam fabrication.

    PubMed

    Urquhart, K S; Lee, S H; Guest, C C; Feldman, M R; Farhoosh, H

    1989-08-15

    Computer Aided Design (CAD) systems that have been developed for electrical and mechanical design tasks are also effective tools for the process of designing Computer Generated Holograms (CGHs), particularly when these holograms are to be fabricated using electron beam lithography. CAD workstations provide efficient and convenient means of computing, storing, displaying, and preparing for fabrication many of the features that are common to CGH designs. Experience gained in the process of designing CGHs with various types of encoding methods is presented. Suggestions are made so that future workstations may further accommodate the CGH design process. PMID:20555710

  9. Computer Aided Design of Computer Generated Holograms for electron beam fabrication

    NASA Technical Reports Server (NTRS)

    Urquhart, Kristopher S.; Lee, Sing H.; Guest, Clark C.; Feldman, Michael R.; Farhoosh, Hamid

    1989-01-01

    Computer Aided Design (CAD) systems that have been developed for electrical and mechanical design tasks are also effective tools for the process of designing Computer Generated Holograms (CGHs), particularly when these holograms are to be fabricated using electron beam lithography. CAD workstations provide efficient and convenient means of computing, storing, displaying, and preparing for fabrication many of the features that are common to CGH designs. Experience gained in the process of designing CGHs with various types of encoding methods is presented. Suggestions are made so that future workstations may further accommodate the CGH design process.

  10. Computer-aided structural design of a lunar radio telescope

    NASA Technical Reports Server (NTRS)

    Akgul, Ferhat; Gerstle, Walter H.; Johnson, Stewart W.

    1990-01-01

    This paper describes a computer-aided structural design of the main reflector of a fully steerable radio telescope to be located (in the 21st century) on the moon, and presents the results of the structural analysis of the reflector. The reflector is a paraboloid with a surface area of 12,660 sq m and a focal ratio of 0.42. The reflector's surface will be covered by a 5.08 cm-thick sandwich panel made of thin-walled aluminum cells filled with low-density foam. The low weight of the design will be achieved by using graphite-epoxy as the structural material.

  11. New Spaces for Learning: Designing College Facilities to Utilize Instructional Aids and Media. Revised.

    ERIC Educational Resources Information Center

    Hauf, Harold D.; And Others

    Colleges need appropriate large group instructional facilities for effective and efficient use of instructional aids and media. A well planned system of facilities must provide space for learning; production, origination, and support; storage and retrieval. Design begins with a building plan--a statement, made jointly by the administrator and…

  12. Expert systems to aid in wind farm operations

    NASA Astrophysics Data System (ADS)

    Schluter, L. L.; Nateghian, F.; Luger, G. F.

    1991-12-01

    An expert system is a knowledge-based program that provides solutions to problems in a specific domain by mimicking the behavior of a human expert. Expert systems can have several advantages over traditional programming methods; however, developing an expert system generally involves a considerable amount of time and money. Therefore, careful investigation must be done to ensure that a problem is suited for an expert system application. This paper examines several areas where an expert system may help wind farm operators lower their operational costs. Justifications for using expert systems rather than traditional programming methods are given. This paper also discusses some of the design decisions that were made in developing an expert system for US Windpower that will aid in diagnosing wind turbine failures.

  13. Visions of visualization aids - Design philosophy and observations

    NASA Technical Reports Server (NTRS)

    Ellis, Stephen R.

    1989-01-01

    Aids for the visualization of high-dimensional scientific or other data must be designed. Simply casting multidimensional data into a two-dimensional or three-dimensional spatial metaphor does not guarantee that the presentation will provide insight or a parsimonious description of phenomena implicit in the data. Useful visualization, in contrast to glitzy, high-tech, computer-graphics imagery, is generally based on preexisting theoretical beliefs concerning the underlying phenomena. These beliefs guide selection and formatting of the plotted variables. Visualization tools are useful for understanding naturally three-dimensional data bases such as those used by pilots or astronauts. Two examples of such aids for spatial maneuvering illustrate that informative geometric distortion may be introduced to assist visualization and that visualization of complex dynamics alone may not be adequate to provide the necessary insight into the underlying processes.

  14. RASCAL: A Rudimentary Adaptive System for Computer-Aided Learning.

    ERIC Educational Resources Information Center

    Stewart, John Christopher

    Both the background of computer-assisted instruction (CAI) systems in general and the requirements of a computer-aided learning system which would be a reasonable assistant to a teacher are discussed. RASCAL (Rudimentary Adaptive System for Computer-Aided Learning) is a first attempt at defining a CAI system which would individualize the learning…

  15. Mammographic computer-aided detection systems.

    PubMed

    2003-04-01

    While mammography is regarded as the best means available to screen for breast cancer, reading mammograms is a tedious, error-prone task. Given the repetitiveness of the process and the fact that less than 1% of mammograms in the average screening population contain cancer, it's no wonder that a significant number of breast cancers--about 28%--are missed by radiologists. The fact that human error is such a significant obstacle makes mammography screening an ideal application for computer-aided detection (CAD) systems. CAD systems serve as a "second pair of eyes" to ensure that radiologists don't miss a suspect area on an image. They analyze patterns on a digitized mammographic image, identify regions that may contain an abnormality indicating cancer, and mark these regions. The marks are then inspected and classified by a radiologist. But CAD systems provide no diagnosis of any kind--it's up to the radiologist to analyze the marked area and decide if it shows cancer. In this Evaluation, we describe the challenges posed by screening mammography, the operating principles and overall efficacy of CAD systems, and the characteristics to consider when purchasing a system. We also compare the performance of two commercially available systems, iCAD's MammoReader and R2's ImageChecker. Because the two systems offer comparable sensitivity, our judgments are based on other performance characteristics, including their ease of use, the number of false marks they produce, the degree to which they can integrate with hospital information systems, and their processing speed. PMID:12760158

  16. Simulation-aided design and synthesis of hierarchically porous membranes.

    PubMed

    Li, Fan; Wilker, Molly B; Stein, Andreas

    2012-05-15

    Free-standing silica membranes with hierarchical porosity (ca. 300 nm macropores surrounded by 6-8 nm mesopores) and controllable mesopore architecture were prepared by a dual-templating method, with the structural design aided by mesoscale simulation. To create a two-dimensional, hexagonal macropore array, polymeric colloidal hemisphere arrays were synthesized by a two-step annealing process starting with non-close-packed polystyrene sphere arrays on silicon coated with a sacrificial alumina layer. A silica precursor containing a poly(ethylene) oxide-poly(propylene oxide)-poly(ethylene) oxide (PEO-PPO-PEO) triblock-copolymer surfactant as template for mesopore creation was spin-coated onto the support and aged and then converted into the free-standing membranes by dissolving both templates and the alumina layer. To test the hypothesis that the mesopore architecture may be influenced by confinement of the surfactant-containing precursor solution in the colloidal array and by its interactions with the polymeric colloids, the system was studied theoretically by dissipative particle dynamics (DPD) simulations and experimentally by examining the pore structures of silica membranes via electron microscopy. The DPD simulations demonstrated that, while only tilted columnar structure can be formed through tuning the interaction with the substrate, perfect alignment of 2D hexagonal micelles perpendicular to the plane of the membrane is achievable by confinement between parallel walls that interact preferentially with the hydrophilic components (PEO blocks, silicate, and solvent). The simulations predicted that this alignment could be maintained across a span of up to 10 columns of micelles, the same length scale defined by the colloidal array. In the actual membranes, we manipulated the mesopore alignment by tuning the solvent polarity relative to the polar surface characteristics of the colloidal hemispheres. With methanol as a solvent, columnar mesopores parallel to the

  17. Aid For Simulating Digital Flight Control Systems

    NASA Technical Reports Server (NTRS)

    Hartman, Richard M.

    1991-01-01

    DIVERS translator is computer program to convert descriptions of digital flight-control systems (DFCS) into computer program. Language developed to represent design charts of DFCS. Translator converts DIVERS source code into easily transportable language, while minimizing probability that results are affected by interpretation of programmer. Final translated program used as standard of comparison to verify operation of actual flight-control systems. Applicable to simulation of other control systems; for example, electrical circuits and logic processes. Written in C.

  18. Single-tooth dento-osseous osteotomy with a computer-aided design/computer-aided manufacturing surgical guide

    PubMed Central

    2016-01-01

    This clinical note introduces a method to assist surgeons in performing single-tooth dento-osseous osteotomy. For use in this method, a surgical guide was manufactured using computer-aided design/computer-aided manufacturing technology and was based on preoperative surgical simulation data. This method was highly conducive to successful single-tooth dento-osseous segmental osteotomy. PMID:27162756

  19. CAD/CAM (Computer Aided Design/Computer Aided Manufacture). A Brief Guide to Materials in the Library of Congress.

    ERIC Educational Resources Information Center

    Havas, George D.

    This brief guide to materials in the Library of Congress (LC) on computer aided design and/or computer aided manufacturing lists reference materials and other information sources under 13 headings: (1) brief introductions; (2) LC subject headings used for such materials; (3) textbooks; (4) additional titles; (5) glossaries and handbooks; (6)…

  20. Visions of visualization aids: Design philosophy and experimental results

    NASA Technical Reports Server (NTRS)

    Ellis, Stephen R.

    1990-01-01

    Aids for the visualization of high-dimensional scientific or other data must be designed. Simply casting multidimensional data into a two- or three-dimensional spatial metaphor does not guarantee that the presentation will provide insight or parsimonious description of the phenomena underlying the data. Indeed, the communication of the essential meaning of some multidimensional data may be obscured by presentation in a spatially distributed format. Useful visualization is generally based on pre-existing theoretical beliefs concerning the underlying phenomena which guide selection and formatting of the plotted variables. Two examples from chaotic dynamics are used to illustrate how a visulaization may be an aid to insight. Two examples of displays to aid spatial maneuvering are described. The first, a perspective format for a commercial air traffic display, illustrates how geometric distortion may be introduced to insure that an operator can understand a depicted three-dimensional situation. The second, a display for planning small spacecraft maneuvers, illustrates how the complex counterintuitive character of orbital maneuvering may be made more tractable by removing higher-order nonlinear control dynamics, and allowing independent satisfaction of velocity and plume impingement constraints on orbital changes.

  1. Computer aided design and analysis of gear tooth geometry

    NASA Technical Reports Server (NTRS)

    Chang, S. H.; Huston, R. L.

    1987-01-01

    A simulation method for gear hobbing and shaping of straight and spiral bevel gears is presented. The method is based upon an enveloping theory for gear tooth profile generation. The procedure is applicable in the computer aided design of standard and nonstandard tooth forms. An inverse procedure for finding a conjugate gear tooth profile is presented for arbitrary cutter geometry. The kinematic relations for the tooth surfaces of straight and spiral bevel gears are proposed. The tooth surface equations for these gears are formulated in a manner suitable for their automated numerical development and solution.

  2. Computer aided design of bevel gear tooth surfaces

    NASA Technical Reports Server (NTRS)

    Chang, S. H.; Huston, R. L.; Coy, J. J.

    1989-01-01

    This paper presents a computer-aided design procedure for generating bevel gears. The development is based on examining a perfectly plastic, cone-shaped gear blank rolling over a cutting tooth on a plane crown rack. The resulting impression on the plastic gear blank is the envelope of the cutting tooth. This impression and envelope thus form a conjugate tooth surface. Equations are presented for the locus of points on the tooth surface. The same procedures are then extended to simulate the generation of a spiral bevel gear. The corresponding governing equations are presented.

  3. Computer-aided design of bevel gear tooth surfaces

    NASA Technical Reports Server (NTRS)

    Shuo, Hung Chang; Huston, Ronald L.; Coy, John J.

    1989-01-01

    This paper presents a computer-aided design procedure for generating bevel gears. The development is based on examining a perfectly plastic, cone-shaped gear blank rolling over a cutting tooth on a plane crown rack. The resulting impression on the plastic gear blank is the envelope of the cutting tooth. This impression and envelope thus form a conjugate tooth surface. Equations are presented for the locus of points on the tooth surface. The same procedures are then extended to simulate the generation of a spiral bevel gear. The corresponding governing equations are presented.

  4. Decomposing Systems Into Subsystems For Design

    NASA Technical Reports Server (NTRS)

    Rogers, James L., Jr.

    1991-01-01

    Interactions among systems displayed in concise format. DeMAID (Design Manager's Aide for Intelligent Decomposition) is knowledge based software system for automating sequencing of subprocesses in design process and identifying possible multilevel structure for synthesis problem. Reorders and groups modules of equipment being designed on basis of links among modules, helping design manager make design decisions early in design cycle. Written in FORTRAN 77.

  5. On the design of reversible QDCA systems.

    SciTech Connect

    DeBenedictis, Erik P.; Frank, Michael P. (Florida State University, Tallahassee, FL); Ottavi, Marco; Frost-Murphy, Sarah E.

    2006-10-01

    This work is the first to describe how to go about designing a reversible QDCA system. The design space is substantial, and there are many questions that a designer needs to answer before beginning to design. This document begins to explicate the tradeoffs and assumptions that need to be made and offers a range of approaches as starting points and examples. This design guide is an effective tool for aiding designers in creating the best quality QDCA implementation for a system.

  6. Application of expert systems in project management decision aiding

    NASA Technical Reports Server (NTRS)

    Harris, Regina; Shaffer, Steven; Stokes, James; Goldstein, David

    1987-01-01

    The feasibility of developing an expert systems-based project management decision aid to enhance the performance of NASA project managers was assessed. The research effort included extensive literature reviews in the areas of project management, project management decision aiding, expert systems technology, and human-computer interface engineering. Literature reviews were augmented by focused interviews with NASA managers. Time estimation for project scheduling was identified as the target activity for decision augmentation, and a design was developed for an Integrated NASA System for Intelligent Time Estimation (INSITE). The proposed INSITE design was judged feasible with a low level of risk. A partial proof-of-concept experiment was performed and was successful. Specific conclusions drawn from the research and analyses are included. The INSITE concept is potentially applicable in any management sphere, commercial or government, where time estimation is required for project scheduling. As project scheduling is a nearly universal management activity, the range of possibilities is considerable. The INSITE concept also holds potential for enhancing other management tasks, especially in areas such as cost estimation, where estimation-by-analogy is already a proven method.

  7. Inert gas spraying device aids in repair of hazardous systems

    NASA Technical Reports Server (NTRS)

    Teleha, S.

    1965-01-01

    Inert gas spraying device aids in safely making mechanical repairs to a cryogenic fluid system without prior emptying of the system. This method can be applied to any natural or bottled gas system and with modifications to gasoline transports.

  8. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication

    PubMed Central

    Bilgin, Mehmet Selim; Baytaroğlu, Ebru Nur; Erdem, Ali; Dilber, Erhan

    2016-01-01

    The aim of this review was to investigate usage of computer-aided design/computer-aided manufacture (CAD/CAM) such as milling and rapid prototyping (RP) technologies for removable denture fabrication. An electronic search was conducted in the PubMed/MEDLINE, ScienceDirect, Google Scholar, and Web of Science databases. Databases were searched from 1987 to 2014. The search was performed using a variety of keywords including CAD/CAM, complete/partial dentures, RP, rapid manufacturing, digitally designed, milled, computerized, and machined. The identified developments (in chronological order), techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication are summarized. Using a variety of keywords and aiming to find the topic, 78 publications were initially searched. For the main topic, the abstract of these 78 articles were scanned, and 52 publications were selected for reading in detail. Full-text of these articles was gained and searched in detail. Totally, 40 articles that discussed the techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication and the articles were incorporated in this review. Totally, 16 of the papers summarized in the table. Following review of all relevant publications, it can be concluded that current innovations and technological developments of CAD/CAM and RP allow the digitally planning and manufacturing of removable dentures from start to finish. As a result according to the literature review CAD/CAM techniques and supportive maxillomandibular relationship transfer devices are growing fast. In the close future, fabricating removable dentures will become medical informatics instead of needing a technical staff and procedures. However the methods have several limitations for now. PMID:27095912

  9. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication.

    PubMed

    Bilgin, Mehmet Selim; Baytaroğlu, Ebru Nur; Erdem, Ali; Dilber, Erhan

    2016-01-01

    The aim of this review was to investigate usage of computer-aided design/computer-aided manufacture (CAD/CAM) such as milling and rapid prototyping (RP) technologies for removable denture fabrication. An electronic search was conducted in the PubMed/MEDLINE, ScienceDirect, Google Scholar, and Web of Science databases. Databases were searched from 1987 to 2014. The search was performed using a variety of keywords including CAD/CAM, complete/partial dentures, RP, rapid manufacturing, digitally designed, milled, computerized, and machined. The identified developments (in chronological order), techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication are summarized. Using a variety of keywords and aiming to find the topic, 78 publications were initially searched. For the main topic, the abstract of these 78 articles were scanned, and 52 publications were selected for reading in detail. Full-text of these articles was gained and searched in detail. Totally, 40 articles that discussed the techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication and the articles were incorporated in this review. Totally, 16 of the papers summarized in the table. Following review of all relevant publications, it can be concluded that current innovations and technological developments of CAD/CAM and RP allow the digitally planning and manufacturing of removable dentures from start to finish. As a result according to the literature review CAD/CAM techniques and supportive maxillomandibular relationship transfer devices are growing fast. In the close future, fabricating removable dentures will become medical informatics instead of needing a technical staff and procedures. However the methods have several limitations for now. PMID:27095912

  10. Computer aided design environment for the analysis and design of multi-body flexible structures

    NASA Technical Reports Server (NTRS)

    Ramakrishnan, Jayant V.; Singh, Ramen P.

    1989-01-01

    A computer aided design environment consisting of the programs NASTRAN, TREETOPS and MATLAB is presented in this paper. With links for data transfer between these programs, the integrated design of multi-body flexible structures is significantly enhanced. The CAD environment is used to model the Space Shuttle/Pinhole Occulater Facility. Then a controller is designed and evaluated in the nonlinear time history sense. Recent enhancements and ongoing research to add more capabilities are also described.

  11. Computer aided systems human engineering: A hypermedia tool

    NASA Technical Reports Server (NTRS)

    Boff, Kenneth R.; Monk, Donald L.; Cody, William J.

    1992-01-01

    The Computer Aided Systems Human Engineering (CASHE) system, Version 1.0, is a multimedia ergonomics database on CD-ROM for the Apple Macintosh II computer, being developed for use by human system designers, educators, and researchers. It will initially be available on CD-ROM and will allow users to access ergonomics data and models stored electronically as text, graphics, and audio. The CASHE CD-ROM, Version 1.0 will contain the Boff and Lincoln (1988) Engineering Data Compendium, MIL-STD-1472D and a unique, interactive simulation capability, the Perception and Performance Prototyper. Its features also include a specialized data retrieval, scaling, and analysis capability and the state of the art in information retrieval, browsing, and navigation.

  12. The application of computer-aided technologies in automotive styling design

    NASA Astrophysics Data System (ADS)

    Zheng, Ze-feng; Zhang, Ji; Zheng, Ying

    2012-04-01

    In automotive industry, outline design is its life and creative design is its soul indeed. Computer-aided technology has been widely used in the automotive industry and more and more attention has been paid. This paper chiefly introduce the application of computer-aided technologies including CAD, CAM and CAE, analyses the process of automotive structural design and describe the development tendency of computer-aided design.

  13. Computers in engineering 1983; Proceedings of the International Conference and Exhibit, Chicago, IL, August 7-11, 1983. Volume 1 - Computer-aided design, manufacturing, and simulation

    NASA Astrophysics Data System (ADS)

    Cokonis, T. J.

    The papers presented in this volume provide examples of the impact of computers on present engineering practice and indicate some future trends in computer-aided design, manufacturing, and simulation. Topics discussed include computer-aided design of turbine cycle configuration, managing and development of engineering computer systems, computer-aided manufacturing with robots in the automotive industry, and computer-aided design/analysis techniques of composite materials in the cure phase. Papers are also presented on computer simulation of vehicular propulsion systems, the performance of a hydraulic system simulator in a CAD environment, and computer simulation of hovercraft heave dynamics and control.

  14. Expert system to design communications circuits

    SciTech Connect

    Tolendino, L.F.; Vahle, M.O.

    1986-07-01

    An expert system has been created to aid the design of fiber optic based communications circuits. The design system is based on an Apollo workstation, LISP and CPSL, an in-house developed expert system language. The optical circuit is taken from design specification through hardware selection and circuit routing to the production of detailed schematics and routing guides. A database containing the entire fiber optic trunk system is also maintained.

  15. Using a Latino Lens to Reimagine Aid Design and Delivery

    ERIC Educational Resources Information Center

    Santiago, Deborah A.

    2013-01-01

    Federal financial aid is critical to student access and success in postsecondary education for many students, including most Latinos. However, three current realities are challenging the effectiveness of federal financial aid policy today: (1) the inability of federal aid to keep pace with the increase in college costs for students; (2) the…

  16. A Design for a Model College Financial Aid Office.

    ERIC Educational Resources Information Center

    Van Dusen, William D.; O'Hearne, John J.

    This report discusses the current types of financial aid and the principles and practices that guide college financial aid programs. Although specific functions vary among institutions, the authors cite a common core of operational activities; counseling about student expenses and financial aid opportunities, general administration, student…

  17. Integrating aerodynamic surface modeling for computational fluid dynamics with computer aided structural analysis, design, and manufacturing

    NASA Technical Reports Server (NTRS)

    Thorp, Scott A.

    1992-01-01

    This presentation will discuss the development of a NASA Geometry Exchange Specification for transferring aerodynamic surface geometry between LeRC systems and grid generation software used for computational fluid dynamics research. The proposed specification is based on a subset of the Initial Graphics Exchange Specification (IGES). The presentation will include discussion of how the NASA-IGES standard will accommodate improved computer aided design inspection methods and reverse engineering techniques currently being developed. The presentation is in viewgraph format.

  18. Design-based approach to ethics in computer-aided diagnosis

    NASA Astrophysics Data System (ADS)

    Collmann, Jeff R.; Lin, Jyh-Shyan; Freedman, Matthew T.; Wu, Chris Y.; Hayes, Wendelin S.; Mun, Seong K.

    1996-04-01

    A design-based approach to ethical analysis examines how computer scientists, physicians and patients make and justify choices in designing, using and reacting to computer-aided diagnosis (CADx) systems. The basic hypothesis of this research is that values are embedded in CADx systems during all phases of their development, not just retrospectively imposed on them. This paper concentrates on the work of computer scientists and physicians as they attempt to resolve central technical questions in designing clinically functional CADx systems for lung cancer and breast cancer diagnosis. The work of Lo, Chan, Freedman, Lin, Wu and their colleagues provides the initial data on which this study is based. As these researchers seek to increase the rate of true positive classifications of detected abnormalities in chest radiographs and mammograms, they explore dimensions of the fundamental ethical principal of beneficence. The training of CADx systems demonstrates the key ethical dilemmas inherent in their current design.

  19. Conceptual spacecraft systems design and synthesis

    NASA Technical Reports Server (NTRS)

    Wright, R. L.; Deryder, D. D.; Ferebee, M. J., Jr.

    1984-01-01

    An interactive systems design and synthesis is performed on future spacecraft concepts using the Interactive Design and Evaluation of Advanced Systems (IDEAS) computer-aided design and analysis system. The capabilities and advantages of the systems-oriented interactive computer-aided design and analysis system are described. The synthesis of both large antenna and space station concepts, and space station evolutionary growth designs is demonstrated. The IDEAS program provides the user with both an interactive graphics and an interactive computing capability which consists of over 40 multidisciplinary synthesis and analysis modules. Thus, the user can create, analyze, and conduct parametric studies and modify earth-orbiting spacecraft designs (space stations, large antennas or platforms, and technologically advanced spacecraft) at an interactive terminal with relative ease. The IDEAS approach is useful during the conceptual design phase of advanced space missions when a multiplicity of parameters and concepts must be analyzed and evaluated in a cost-effective and timely manner.

  20. Computer-aided retinal photocoagulation system

    NASA Astrophysics Data System (ADS)

    Barrett, Steven F.; Wright, Cameron H.; Jerath, Maya R.; Lewis, R. Stephen; Dillard, Bryan C.; Rylander, Henry G.; Welch, Ashley J.

    1996-01-01

    Researchers at the University of Texas at Austin's Biomedical Engineering Laser Laboratory and the U.S. Air Force Academy's Department of Electrical Engineering are developing a computer-assisted prototype retinal photocoagulation system. The project goal is to rapidly and precisely automatically place laser lesions in the retina for the treatment of disorders such as diabetic retinopathy and retinal tears while dynamically controlling the extent of the lesion. Separate prototype subsystems have been developed to control lesion parameters (diameter or depth) using lesion reflectance feedback and lesion placement using retinal vessels as tracking landmarks. Successful subsystem testing results in vivo on pigmented rabbits using an argon continuous wave laser are presented. A prototype integrated system design to simultaneously control lesion parameters and placement at clinically significant speeds is provided.

  1. Fracture resistance of computer-aided design/computer-aided manufacturing-generated composite resin-based molar crowns.

    PubMed

    Harada, Akio; Nakamura, Keisuke; Kanno, Taro; Inagaki, Ryoichi; Örtengren, Ulf; Niwano, Yoshimi; Sasaki, Keiichi; Egusa, Hiroshi

    2015-04-01

    The aim of this study was to investigate whether different fabrication processes, such as the computer-aided design/computer-aided manufacturing (CAD/CAM) system or the manual build-up technique, affect the fracture resistance of composite resin-based crowns. Lava Ultimate (LU), Estenia C&B (EC&B), and lithium disilicate glass-ceramic IPS e.max press (EMP) were used. Four types of molar crowns were fabricated: CAD/CAM-generated composite resin-based crowns (LU crowns); manually built-up monolayer composite resin-based crowns (EC&B-monolayer crowns); manually built-up layered composite resin-based crowns (EC&B-layered crowns); and EMP crowns. Each type of crown was cemented to dies and the fracture resistance was tested. EC&B-layered crowns showed significantly lower fracture resistance compared with LU and EMP crowns, although there was no significant difference in flexural strength or fracture toughness between LU and EC&B materials. Micro-computed tomography and fractographic analysis showed that decreased strength probably resulted from internal voids in the EC&B-layered crowns introduced by the layering process. There was no significant difference in fracture resistance among LU, EC&B-monolayer, and EMP crowns. Both types of composite resin-based crowns showed fracture loads of >2000 N, which is higher than the molar bite force. Therefore, CAD/CAM-generated crowns, without internal defects, may be applied to molar regions with sufficient fracture resistance. PMID:25683749

  2. Evaluation of computer-aided design and drafting for the electric power industry. Final report

    SciTech Connect

    Anuskiewicz, T.; Barduhn, G.; Lowther, B.; Osman, I.

    1984-01-01

    This report reviews current and future computer-aided design and drafting (CADD) technology relative to utility needs and to identify useful development projects that may be undertaken by EPRI. The principal conclusions are that computer aids offer substantial cost and time savings and that computer systems are being developed to take advantage of the savings. Data bases are not available for direct communication between computers used by the power industry and will limit benefits to the industry. Recommendations are made for EPRI to take the initiative to develop the data bases for direct communication between power industry computers and to research, develop, and demonstrate new applications within the industry. Key components of a CADD system are described. The state of the art of two- and three-dimensional CADD systems to perform graphics and project management control functions are assessed. Comparison is made of three-dimensional electronic models and plastic models.

  3. A Multidisciplinary Research Team Approach to Computer-Aided Drafting (CAD) System Selection. Final Report.

    ERIC Educational Resources Information Center

    Franken, Ken; And Others

    A multidisciplinary research team was assembled to review existing computer-aided drafting (CAD) systems for the purpose of enabling staff in the Design Drafting Department at Linn Technical College (Missouri) to select the best system out of the many CAD systems in existence. During the initial stage of the evaluation project, researchers…

  4. The Aerospace Vehicle Interactive Design system

    NASA Technical Reports Server (NTRS)

    Wilhite, A. W.

    1981-01-01

    The aerospace vehicle interactive design (AVID) is a computer aided design that was developed for the conceptual and preliminary design of aerospace vehicles. The AVID system evolved from the application of several design approaches in an advanced concepts environment in which both mission requirements and vehicle configurations are continually changing. The basic AVID software facilitates the integration of independent analysis programs into a design system where the programs can be executed individually for analysis or executed in groups for design iterations and parametric studies. Programs integrated into an AVID system for launch vehicle design include geometry, aerodynamics, propulsion, flight performance, mass properties, and economics.

  5. Computer-Aided Drug Discovery and Design Targeting Ion Channels.

    PubMed

    Zhang, Qiansen; Gao, Zhaobing; Yang, Huaiyu

    2016-01-01

    Ion channels are widely expressed in living cells and play critical roles in various cellular biological functions. Dysfunctional ion channels can cause a variety of diseases, making ion channels attractive targets for drug discovery. Computational approaches, such as molecular docking and molecular dynamic simulations, provide economic and efficient tools for finding modulators of ion channels and for elucidating the action mechanisms of small molecules. In this review, we focus primarily on four types of ion channels (voltage-gated, ligand-gated, acid-sensing, and virus matrix 2 ion channels). The current advancements in computer-aided drug discovery and design targeting ion channels are summarized. First, ligand-based studies for drug design are briefly outlined. Then, we focus on the structurebased studies targeting pore domains, endogenous binding sites and allosteric sites of ion channels. Moreover, we also review the contribution of computational methods to the field of ligand binding and unbinding pathways of ion channels. Finally, we propose future developments for the field. PMID:26975507

  6. Molecular Similarity in Computer-Aided Molecular Design.

    NASA Astrophysics Data System (ADS)

    Hodgkin, Edward E.

    Available from UMI in association with The British Library. Requires signed TDF. The quantitative measurement of how similar one molecule is to another is investigated as a potential aid to molecular design. The work concentrates on the comparison of electronic properties of molecules, in particular electron density distribution, molecular electrostatic potential, molecular electric field and frontier orbital wavefunctions. A novel formula for molecular similarity has been devised and applied to these four properties. An approximate representation of valence electron density is used, based on the notion that charge distribution in a large molecule may be built from transferable contributions from its constituent functional groups. Each of these contributions consists of a series of first-order gaussian functions. The electrostatic potentials and electric fields used in the similarity calculations are computed from atom -centered partial charges. The frontier orbital wavefunction comparisons are performed using the extended Huckel method. The four measures of similarity are related to chemical and biological data and shown to have possible applications in the area of drug design.

  7. Computer-aided analysis and design of the shape rolling process for producing turbine engine airfoils

    NASA Technical Reports Server (NTRS)

    Lahoti, G. D.; Akgerman, N.; Altan, T.

    1978-01-01

    Mild steel (AISI 1018) was selected as model cold rolling material and Ti-6A1-4V and Inconel 718 were selected as typical hot rolling and cold rolling alloys, respectively. The flow stress and workability of these alloys were characterized and friction factor at the roll/workpiece interface was determined at their respective working conditions by conducting ring tests. Computer-aided mathematical models for predicting metal flow and stresses, and for simulating the shape rolling process were developed. These models utilized the upper bound and the slab methods of analysis, and were capable of predicting the lateral spread, roll separating force, roll torque, and local stresses, strains and strain rates. This computer-aided design system was also capable of simulating the actual rolling process, and thereby designing the roll pass schedule in rolling of an airfoil or a similar shape.

  8. Rubber airplane: Constraint-based component-modeling for knowledge representation in computer-aided conceptual design

    NASA Technical Reports Server (NTRS)

    Kolb, Mark A.

    1990-01-01

    Viewgraphs on Rubber Airplane: Constraint-based Component-Modeling for Knowledge Representation in Computer Aided Conceptual Design are presented. Topics covered include: computer aided design; object oriented programming; airfoil design; surveillance aircraft; commercial aircraft; aircraft design; and launch vehicles.

  9. A Computer-Aided Approach for Designing Edge-Slot Waveguide Arrays

    NASA Technical Reports Server (NTRS)

    Gosselin, Renee Brian

    2003-01-01

    Traditional techniques for designing resonant edge-slot waveguide arrays have required an iterative trial-and-error process of measuring slot data from several prototypes. Since very little meaningful data has been published, this technology remains relatively immature and prohibitive for many smaller programs that could benefit from some advantages this antenna has to offer. A new Computer-Aided Design technique for designing resonant edge-slot waveguide arrays was used to successfuliy design such an X-band radiometer antenna for the NASA Light Rainfall Radiometer (LRR) instrument. Having the ability to rapidly create such an extremely accurate and efficient antenna design without the need to manufacture prototypes has also enabled inexpensive research that promises to improve the system-level performance of microwave radiometers for upcoming space-flight missions. This paper will present details of the LRR antenna design and describe some other current edge-slot array accomplishments at Goddard Space Flight Center.

  10. Automating software design system DESTA

    NASA Technical Reports Server (NTRS)

    Lovitsky, Vladimir A.; Pearce, Patricia D.

    1992-01-01

    'DESTA' is the acronym for the Dialogue Evolutionary Synthesizer of Turnkey Algorithms by means of a natural language (Russian or English) functional specification of algorithms or software being developed. DESTA represents the computer-aided and/or automatic artificial intelligence 'forgiving' system which provides users with software tools support for algorithm and/or structured program development. The DESTA system is intended to provide support for the higher levels and earlier stages of engineering design of software in contrast to conventional Computer Aided Design (CAD) systems which provide low level tools for use at a stage when the major planning and structuring decisions have already been taken. DESTA is a knowledge-intensive system. The main features of the knowledge are procedures, functions, modules, operating system commands, batch files, their natural language specifications, and their interlinks. The specific domain for the DESTA system is a high level programming language like Turbo Pascal 6.0. The DESTA system is operational and runs on an IBM PC computer.

  11. System integration of pattern recognition, adaptive aided, upper limb prostheses

    NASA Technical Reports Server (NTRS)

    Lyman, J.; Freedy, A.; Solomonow, M.

    1975-01-01

    The requirements for successful integration of a computer aided control system for multi degree of freedom artificial arms are discussed. Specifications are established for a system which shares control between a human amputee and an automatic control subsystem. The approach integrates the following subsystems: (1) myoelectric pattern recognition, (2) adaptive computer aiding; (3) local reflex control; (4) prosthetic sensory feedback; and (5) externally energized arm with the functions of prehension, wrist rotation, elbow extension and flexion and humeral rotation.

  12. An intelligent robotic aid system for human services

    NASA Technical Reports Server (NTRS)

    Kawamura, K.; Bagchi, S.; Iskarous, M.; Pack, R. T.; Saad, A.

    1994-01-01

    The long term goal of our research at the Intelligent Robotic Laboratory at Vanderbilt University is to develop advanced intelligent robotic aid systems for human services. As a first step toward our goal, the current thrusts of our R&D are centered on the development of an intelligent robotic aid called the ISAC (Intelligent Soft Arm Control). In this paper, we describe the overall system architecture and current activities in intelligent control, adaptive/interactive control and task learning.

  13. COMPUTER-AIDED SYNTHESIS OF WASTEWATER TREATMENT AND SLUDGE DISPOSAL SYSTEMS

    EPA Science Inventory

    A computer-aided design procedure for the preliminary synthesis of wastewater treatment and sludge disposal systems is developed. It selects the components in the wastewater treatment and sludge disposal trains from a list of candidate process units with fixed design characterist...

  14. Computer aided design of digital controller for radial active magnetic bearings

    NASA Technical Reports Server (NTRS)

    Cai, Zhong; Shen, Zupei; Zhang, Zuming; Zhao, Hongbin

    1992-01-01

    A five degree of freedom Active Magnetic Bearing (AMB) system is developed which is controlled by digital controllers. The model of the radial AMB system is linearized and the state equation is derived. Based on the state variables feedback theory, digital controllers are designed. The performance of the controllers are evaluated according to experimental results. The Computer Aided Design (CAD) method is used to design controllers for magnetic bearings. The controllers are implemented with a digital signal processing (DSP) system. The control algorithms are realized with real-time programs. It is very easy to change the controller by changing or modifying the programs. In order to identify the dynamic parameters of the controlled magnetic system, a special experiment was carried out. Also, the online Recursive Least Squares (RLS) parameter identification method is studied. It can be realized with the digital controllers. Online parameter identification is essential for the realization of an adaptive controller.

  15. Computer aided design of digital controller for radial active magnetic bearings

    NASA Astrophysics Data System (ADS)

    Cai, Zhong; Shen, Zupei; Zhang, Zuming; Zhao, Hongbin

    1992-05-01

    A five degree of freedom Active Magnetic Bearing (AMB) system is developed which is controlled by digital controllers. The model of the radial AMB system is linearized and the state equation is derived. Based on the state variables feedback theory, digital controllers are designed. The performance of the controllers are evaluated according to experimental results. The Computer Aided Design (CAD) method is used to design controllers for magnetic bearings. The controllers are implemented with a digital signal processing (DSP) system. The control algorithms are realized with real-time programs. It is very easy to change the controller by changing or modifying the programs. In order to identify the dynamic parameters of the controlled magnetic system, a special experiment was carried out. Also, the online Recursive Least Squares (RLS) parameter identification method is studied. It can be realized with the digital controllers. Online parameter identification is essential for the realization of an adaptive controller.

  16. Perceptions of the Design of Voice Output Communication Aids

    ERIC Educational Resources Information Center

    Judge, Simon; Townend, Gillian

    2013-01-01

    Background: Voice output communication aids (VOCAs) are a key form of aided communication within the field of augmentative and alternative communication (AAC). In recent years, rapid developments in technology have resulted in an explosion of devices available commercially, yet little research has been conducted into what people who use VOCAs…

  17. Designing Student Aid Policies for the 1980's.

    ERIC Educational Resources Information Center

    Johnson, Jane Louise

    1980-01-01

    The student financial aid mechanism has been considered the form of subsidy more likely to provide both access and choice since it can target aid to students most in need of it and lets student choose the college of their choice. The Tuition Assistance Program in New York is discussed. (MLW)

  18. Optical design with the aid of a genetic algorithm.

    PubMed

    van Leijenhorst, D C; Lucasius, C B; Thijssen, J M

    1996-01-01

    Natural evolution is widely accepted as being the process underlying the design and optimization of the sensory functions of biological organisms. Using a genetic algorithm, this process is extended to the automatic optimization and design of optical systems, e.g. as used in astronomical telescopes. The results of this feasibility study indicate that various types of aberrations can be corrected quickly and simultaneously, even on small computers. PMID:8924643

  19. Computer-aided space shuttle orbiter wing design study

    NASA Technical Reports Server (NTRS)

    Phillips, W. P.; Decker, J. P.; Rau, T. R.; Glatt, C. R.

    1974-01-01

    An analytical and experimental investigation has been made to provide a space shuttle orbiter wing design that met the guideline requirements of landing performance, stability, and hypersonic trim for a specified center-of-gravity envelope. The analytical study was facilitated by the use of the Optimal Design Integration system (ODIN) and the experimental part of the investigation was conducted in the Langley low-turbulence pressure tunnel and the Langley continuous-flow hypersonic tunnel.

  20. Computer aided design of a bipolar lead/acid battery

    NASA Astrophysics Data System (ADS)

    Kao, Wen-Hong

    Statistical design of experiments, coupled with the proprietary mathematical lead/acid model of Johnson Controls, Inc., were used to derive the design of a very high power bipolar lead/acid battery for the Jet Propulsion Laboratory. The effects of some battery component factors and discharge rate on the battery performance, predicted by the lead/acid model, were evaluated. The strategy to derive the optimum battery design, the roles of each battery component, limitations of the system, and the directions to improve the battery performance are discussed.

  1. A machine learning approach to computer-aided molecular design.

    PubMed

    Bolis, G; Di Pace, L; Fabrocini, F

    1991-12-01

    Preliminary results of a machine learning application concerning computer-aided molecular design applied to drug discovery are presented. The artificial intelligence techniques of machine learning use a sample of active and inactive compounds, which is viewed as a set of positive and negative examples, to allow the induction of a molecular model characterizing the interaction between the compounds and a target molecule. The algorithm is based on a twofold phase. In the first one--the specialization step--the program identifies a number of active/inactive pairs of compounds which appear to be the most useful in order to make the learning process as effective as possible and generates a dictionary of molecular fragments, deemed to be responsible for the activity of the compounds. In the second phase--the generalization step--the fragments thus generated are combined and generalized in order to select the most plausible hypothesis with respect to the sample of compounds. A knowledge base concerning physical and chemical properties is utilized during the inductive process. PMID:1818094

  2. Software Design Analyzer System

    NASA Technical Reports Server (NTRS)

    Tausworthe, R. C.

    1985-01-01

    CRISP80 software design analyzer system a set of programs that supports top-down, hierarchic, modular structured design, and programing methodologies. CRISP80 allows for expression of design as picture of program.

  3. VLSI system design

    NASA Astrophysics Data System (ADS)

    Muroga, S.

    A complete picture of LSI/VLSI system design is provided, encompassing both engineering and economic considerations. The subjects discussed include: cost analysis based on production volume, yield, chip size, design manpower and other factors; bipolar and MOS logic families, logic design procedures, and mask designs; use of ROMs and PLAs in logic design, along with design algorithms; a survey of CAD used in LSI/VLSI chip design. Also covered are: full-custom and semicustom designs; microprocessor and dedicated processor chips; system design and hardware-software tradeoffs; LSI/VLSI technological trends; new products realized by LSI/VLSI technology; future production and management problems.

  4. Program Helps Decompose Complex Design Systems

    NASA Technical Reports Server (NTRS)

    Rogers, James L., Jr.; Hall, Laura E.

    1994-01-01

    DeMAID (A Design Manager's Aid for Intelligent Decomposition) computer program is knowledge-based software system for ordering sequence of modules and identifying possible multilevel structure for design problem. Groups modular subsystems on basis of interactions among them. Saves considerable money and time in total design process, particularly in new design problem in which order of modules has not been defined. Available in two machine versions: Macintosh and Sun.

  5. Persons with Alzheimer's Disease Make Phone Calls Independently Using a Computer-Aided Telephone System

    ERIC Educational Resources Information Center

    Perilli, Viviana; Lancioni, Giulio E.; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Cassano, Germana; Cordiano, Noemi; Pinto, Katia; Minervini, Mauro G.; Oliva, Doretta

    2012-01-01

    This study assessed whether four patients with a diagnosis of Alzheimer's disease could make independent phone calls via a computer-aided telephone system. The study was carried out according to a non-concurrent multiple baseline design across participants. All participants started with baseline during which the telephone system was not available,…

  6. Functional Specifications for Computer Aided Training Systems Development and Management (CATSDM) Support Functions. Final Report.

    ERIC Educational Resources Information Center

    Hughes, John; And Others

    This report provides a description of a Computer Aided Training System Development and Management (CATSDM) environment based on state-of-the-art hardware and software technology, and including recommendations for off the shelf systems to be utilized as a starting point in addressing the particular systematic training and instruction design and…

  7. Energy Systems Design

    NASA Technical Reports Server (NTRS)

    1986-01-01

    PRESTO, a COSMIC program, handles energy system specifications and predicts design efficiency of cogeneration systems. These systems allow a company to use excess energy produced to generate electricity. PRESTO is utilized by the Energy Systems Division of Thermo Electron Corporation in the custom design of cogeneration systems.

  8. 33 CFR 66.05-100 - Designation of navigable waters as State waters for private aids to navigation.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... as State waters for private aids to navigation. 66.05-100 Section 66.05-100 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-100 Designation of navigable waters as State waters for private aids...

  9. 33 CFR 66.05-100 - Designation of navigable waters as State waters for private aids to navigation.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... as State waters for private aids to navigation. 66.05-100 Section 66.05-100 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-100 Designation of navigable waters as State waters for private aids...

  10. 33 CFR 66.05-10 - State waters for private aids to navigation; designations; revisions, and revocations.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 1 2012-07-01 2012-07-01 false State waters for private aids to... Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-10 State waters for private aids to navigation; designations; revisions,...

  11. 33 CFR 66.05-100 - Designation of navigable waters as State waters for private aids to navigation.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... as State waters for private aids to navigation. 66.05-100 Section 66.05-100 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-100 Designation of navigable waters as State waters for private aids...

  12. 33 CFR 66.05-10 - State waters for private aids to navigation; designations; revisions, and revocations.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 1 2014-07-01 2014-07-01 false State waters for private aids to... Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-10 State waters for private aids to navigation; designations; revisions,...

  13. 33 CFR 66.05-100 - Designation of navigable waters as State waters for private aids to navigation.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... as State waters for private aids to navigation. 66.05-100 Section 66.05-100 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-100 Designation of navigable waters as State waters for private aids...

  14. 33 CFR 66.05-10 - State waters for private aids to navigation; designations; revisions, and revocations.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false State waters for private aids to... Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-10 State waters for private aids to navigation; designations; revisions,...

  15. 33 CFR 66.05-10 - State waters for private aids to navigation; designations; revisions, and revocations.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false State waters for private aids to... Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-10 State waters for private aids to navigation; designations; revisions,...

  16. 33 CFR 66.05-100 - Designation of navigable waters as State waters for private aids to navigation.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... as State waters for private aids to navigation. 66.05-100 Section 66.05-100 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-100 Designation of navigable waters as State waters for private aids...

  17. 33 CFR 66.05-10 - State waters for private aids to navigation; designations; revisions, and revocations.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false State waters for private aids to... Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-10 State waters for private aids to navigation; designations; revisions,...

  18. Aiding Design of Wave Energy Converters via Computational Simulations

    NASA Astrophysics Data System (ADS)

    Jebeli Aqdam, Hejar; Ahmadi, Babak; Raessi, Mehdi; Tootkaboni, Mazdak

    2015-11-01

    With the increasing interest in renewable energy sources, wave energy converters will continue to gain attention as a viable alternative to current electricity production methods. It is therefore crucial to develop computational tools for the design and analysis of wave energy converters. A successful design requires balance between the design performance and cost. Here an analytical solution is used for the approximate analysis of interactions between a flap-type wave energy converter (WEC) and waves. The method is verified using other flow solvers and experimental test cases. Then the model is used in conjunction with a powerful heuristic optimization engine, Charged System Search (CSS) to explore the WEC design space. CSS is inspired by charged particles behavior. It searches the design space by considering candidate answers as charged particles and moving them based on the Coulomb's laws of electrostatics and Newton's laws of motion to find the global optimum. Finally the impacts of changes in different design parameters on the power takeout of the superior WEC designs are investigated. National Science Foundation, CBET-1236462.

  19. AIDS and international security in the United Nations System.

    PubMed

    Rushton, Simon

    2010-11-01

    Two assumptions underpin much of the literature that has examined the links between HIV/AIDS and security: (1) that HIV/AIDS is now firmly established as an international security issue; and (2) that Resolution 1308, adopted by the UN Security Council in July 2000, was the decisive moment in the securitization process. This article questions both of those assumptions. It argues that even within the Security Council, HIV/AIDS' status as a bona fide threat to international peace and security is not entirely secure. Despite the fact that the Resolution was adopted unanimously, there is considerable doubt over the extent to which the Council members were persuaded that HIV/AIDS is genuinely a threat to international peace and security. Furthermore, the Council's subsequent actions suggest a retreat from the issue. The article moves on to examine statements made in and by some of the other key UN System bodies grappling with HIV/AIDS. Focusing in particular on the General Assembly, the Economic and Social Council and UNAIDS, it is argued that the international security framing of HIV/AIDS has not generally achieved a great deal of traction within these bodies. Alternative framings, in particular international development and human rights, occur far more frequently. This raises issues for our understanding of both securitization theory and the global governance of HIV/AIDS. PMID:20961950

  20. Leadless chip carrier packaging and CAD/CAM (Computer-Aided Design/Computer-Aided Manufacturing) supported wire wrap interconnect technology for subnanosecond ECL (Emitter Coupled Logic)

    NASA Astrophysics Data System (ADS)

    Gilbert, B. K.

    1982-12-01

    This document is the third year interim report for a four-year program to refine and develop Computer-Aided Design protocols for implementation of subnanosceond Emitter Coupled Logic in High-Speed Computer Modules using a wire wrap interconnection medium. The software and user manual for implementation guides are not part of the actual report. This report describes the results of work conducted in the third year of a four year program to develop rapid methods for designing and prototyping high-speed digital processor systems using subnanosecond emitter coupled logic (ECL). The third year effort was divided into two separate sets of tasks. In Task 1, described in Sections 3 - 7 of this report, we have nearly completed development of new sets of design rules, interconnection protocols, special components, and logic panels, for a technology based upon specially designed leadless ceramic chip carriers developed at Mayo Foundation. Task 2, described in Sections 8 and IX of this report, continued the development of a comprehensive computer-aided design/computer-aided manufacturing (CAD/CAM) software package which is specifically tailored to support the peculiar design requirements of processors operating in a high clock rate, transmission line environment, either with subnanosecond ECL components or with any other families of subnanosecond devices.

  1. Computer aids for the design of subdivisions for solar access

    SciTech Connect

    Clark, M.M.

    1985-01-01

    Two analytical tools were developed to aid surveyors, architects, and planners in siting solar devices. The tools are in the form of computer programs that produce numerical and graphic data. One program plots the shadows in an area for a given date, time and place. If a composite shadow for an entire day is required, the user can request shadow plots for more than one time. A second program computes the solar envelope for a parcel of land. These are useful for modification of zoning and buildable volume requirements for a parcel. If a dwelling is situated entirely within the envelope, owners of neighboring parcels can be guaranteed that their solar access will be preserved. Output is in the form of elevation differences between the terrain and the envelope and a perspective view of the envelope. Stochastic analysis of the mathematical models is discussed. This includes propagation of random error in the measuring system and comparison of computer generated data with actual ground measurements. Some legal concerns of solar access and the problem of blocking sunlight are also discussed.

  2. DeMAID: A Design Manager's Aide for Intelligent Decomposition user's guide

    NASA Technical Reports Server (NTRS)

    Rogers, James L.

    1989-01-01

    A design problem is viewed as a complex system divisible into modules. Before the design of a complex system can begin, the couplings among modules and the presence of iterative loops is determined. This is important because the design manager must know how to group the modules into subsystems and how to assign subsystems to design teams so that changes in one subsystem will have predictable effects on other subsystems. Determining these subsystems is not an easy, straightforward process and often important couplings are overlooked. Moreover, the planning task must be repeated as new information become available or as the design specifications change. The purpose of this research is to develop a knowledge-based tool called the Design Manager's Aide for Intelligent Decomposition (DeMAID) to act as an intelligent advisor for the design manager. DeMaid identifies the subsystems of a complex design problem, orders them into a well-structured format, and marks the couplings among the subsystems to facilitate the use of multilevel tools. DeMAID also provides the design manager with the capability of examining the trade-offs between sequential and parallel processing. This type of approach could lead to a substantial savings or organizing and displaying a complex problem as a sequence of subsystems easily divisible among design teams. This report serves as a User's Guide for the program.

  3. Control system design guide

    SciTech Connect

    Sellers, David; Friedman, Hannah; Haasl, Tudi; Bourassa, Norman; Piette, Mary Ann

    2003-05-01

    The ''Control System Design Guide'' (Design Guide) provides methods and recommendations for the control system design process and control point selection and installation. Control systems are often the most problematic system in a building. A good design process that takes into account maintenance, operation, and commissioning can lead to a smoothly operating and efficient building. To this end, the Design Guide provides a toolbox of templates for improving control system design and specification. HVAC designers are the primary audience for the Design Guide. The control design process it presents will help produce well-designed control systems that achieve efficient and robust operation. The spreadsheet examples for control valve schedules, damper schedules, and points lists can streamline the use of the control system design concepts set forth in the Design Guide by providing convenient starting points from which designers can build. Although each reader brings their own unique questions to the text, the Design Guide contains information that designers, commissioning providers, operators, and owners will find useful.

  4. PUZZLE - A program for computer-aided design of printed circuit artwork

    NASA Technical Reports Server (NTRS)

    Harrell, D. A. W.; Zane, R.

    1971-01-01

    Program assists in solving spacing problems encountered in printed circuit /PC/ design. It is intended to have maximum use for two-sided PC boards carrying integrated circuits, and also aids design of discrete component circuits.

  5. Improving radiation survey data using CADD/CAE (computer-aided design and drafting computer-aided engineering)

    SciTech Connect

    Palau, G.L.; Tarpinian, J.E.

    1987-01-01

    A new application of computer-aided design and drafting (CADD) and computer-aided engineering (CAE) at the Three Mile Island Unit 2 (TMI-2) cleanup is improving the quality of radiation survey data taken in the plant. The use of CADD/CAE-generated survey maps has increased both the accuracy of survey data and the capability to perform analyses with these data. In addition, health physics technician manhours and radiation exposure can be reduced in situations where the CADD/CAE-generated drawings are used for survey mapping.

  6. Designing and Implementing an Educational Program on AIDS for Minority Childbearing Women To Enhance AIDS Awareness.

    ERIC Educational Resources Information Center

    Nimphius, Gail M.

    Ignorance, misinformation, and a failure to personalize the risk for acquisition of the Acquired Immune Deficiency Syndrome (AIDS) virus has created a situation in which the incidence of Human Immunodeficiency Virus (HIV) seroprevalence among minority childbearing women in a Florida county is increasing. An increased incidence in this population…

  7. DeMAID/GA USER'S GUIDE Design Manager's Aid for Intelligent Decomposition with a Genetic Algorithm

    NASA Technical Reports Server (NTRS)

    Rogers, James L.

    1996-01-01

    Many companies are looking for new tools and techniques to aid a design manager in making decisions that can reduce the time and cost of a design cycle. One tool that is available to aid in this decision making process is the Design Manager's Aid for Intelligent Decomposition (DeMAID). Since the initial release of DEMAID in 1989, numerous enhancements have been added to aid the design manager in saving both cost and time in a design cycle. The key enhancement is a genetic algorithm (GA) and the enhanced version is called DeMAID/GA. The GA orders the sequence of design processes to minimize the cost and time to converge to a solution. These enhancements as well as the existing features of the original version of DEMAID are described. Two sample problems are used to show how these enhancements can be applied to improve the design cycle. This report serves as a user's guide for DeMAID/GA.

  8. Computer-aided surface roughness measurement system

    SciTech Connect

    Hughes, F.J.; Schankula, M.H.

    1983-11-01

    A diamond stylus profilometer with computer-based data acquisition/analysis system is being used to characterize surfaces of reactor components and materials, and to examine the effects of surface topography on thermal contact conductance. The current system is described; measurement problems and system development are discussed in general terms and possible future improvements are outlined.

  9. Vision aided inertial navigation system augmented with a coded aperture

    NASA Astrophysics Data System (ADS)

    Morrison, Jamie R.

    plate aperture produces diffraction patterns that change the shape of the focal blur pattern. When used as an aperture, the Fresnel zone plate produces multiple focal planes in the scene. The interference between the multiple focal planes produce changes in the aperture that can be observed both between the focal planes and beyond the most distant focal plane. The Fresnel zone plate aperture and lens may be designed to change in the focal blur pattern at greater depths, thereby improving measurement performance of the coded aperture system. This research provides an in-depth study of the Fresnel zone plate used as a coded aperture, and the performance improvement obtained by augmenting a single camera vision aided inertial navigation system with a Fresnel zone plate coded aperture. Design and analysis of a generalized coded aperture is presented and demonstrated, and special considerations for the Fresnel zone plate are given. Also techniques to determine a continuous depth measurement from a coded image are presented and evaluated through measurement. Finally the measurement results from different aperture configurations are statistically modeled and compared with a simulated vision aided navigation environment to predict the change in performance of a vision aided inertial navigation system when augmented with a coded aperture.

  10. Computer-Aided Communication Satellite System Analysis and Optimization.

    ERIC Educational Resources Information Center

    Stagl, Thomas W.; And Others

    Various published computer programs for fixed/broadcast communication satellite system synthesis and optimization are discussed. The rationale for selecting General Dynamics/Convair's Satellite Telecommunication Analysis and Modeling Program (STAMP) in modified form to aid in the system costing and sensitivity analysis work in the Program on…

  11. Toward Computer-Aided Affective Learning Systems: A Literature Review

    ERIC Educational Resources Information Center

    Moridis, C. N.; Economides, A. A.

    2008-01-01

    The aim of this survey is to provide an overview of the various components of "computer aided affective learning systems." The research is classified into 3 main scientific areas that are integral parts of the development of these kinds of systems. The three main scientific areas are: i) emotions and their connection to learning; ii) affect…

  12. A Model for Intelligent Computer-Aided Education Systems.

    ERIC Educational Resources Information Center

    Du Plessis, Johan P.; And Others

    1995-01-01

    Proposes a model for intelligent computer-aided education systems that is based on cooperative learning, constructive problem-solving, object-oriented programming, interactive user interfaces, and expert system techniques. Future research is discussed, and a prototype for teaching mathematics to 10- to 12-year-old students is appended. (LRW)

  13. Key Factors of Circulation System Analysis and Design

    ERIC Educational Resources Information Center

    McGee, Rob

    1972-01-01

    Explained are basic concepts and components that are common to manual, machine-aided, and computer-based systems, and their significance as key factors in the analysis and design of academic library circulation systems is documented. (2 references) (Author)

  14. Computer-aided protective system (CAPS)

    SciTech Connect

    Squire, R.K.

    1988-01-01

    A method of improving the security of materials in transit is described. The system provides a continuously monitored position location system for the transport vehicle, an internal computer-based geographic delimiter that makes continuous comparisons of actual positions with the preplanned routing and schedule, and a tamper detection/reaction system. The position comparison is utilized to institute preprogrammed reactive measures if the carrier is taken off course or schedule, penetrated, or otherwise interfered with. The geographic locater could be an independent internal platform or an external signal-dependent system utilizing GPS, Loran or similar source of geographic information; a small (micro) computer could provide adequate memory and computational capacity; the insurance of integrity of the system indicates the need for a tamper-proof container and built-in intrusion sensors. A variant of the system could provide real-time transmission of the vehicle position and condition to a central control point for; such transmission could be encrypted to preclude spoofing.

  15. The vehicle design evaluation program - A computer-aided design procedure for transport aircraft

    NASA Technical Reports Server (NTRS)

    Oman, B. H.; Kruse, G. S.; Schrader, O. E.

    1977-01-01

    The vehicle design evaluation program is described. This program is a computer-aided design procedure that provides a vehicle synthesis capability for vehicle sizing, external load analysis, structural analysis, and cost evaluation. The vehicle sizing subprogram provides geometry, weight, and balance data for aircraft using JP, hydrogen, or methane fuels. The structural synthesis subprogram uses a multistation analysis for aerodynamic surfaces and fuselages to develop theoretical weights and geometric dimensions. The parts definition subprogram uses the geometric data from the structural analysis and develops the predicted fabrication dimensions, parts material raw stock buy requirements, and predicted actual weights. The cost analysis subprogram uses detail part data in conjunction with standard hours, realization factors, labor rates, and material data to develop the manufacturing costs. The program is used to evaluate overall design effects on subsonic commercial type aircraft due to parameter variations.

  16. Computer-aided analysis and design of the shape rolling process for producing turbine engine airfoils

    NASA Technical Reports Server (NTRS)

    Lahoti, G. D.; Akgerman, N.; Altan, T.

    1978-01-01

    Mild steel (AISI 1018) was selected as model cold-rolling material and Ti-6Al-4V and INCONEL 718 were selected as typical hot-rolling and cold-rolling alloys, respectively. The flow stress and workability of these alloys were characterized and friction factor at the roll/workpiece interface was determined at their respective working conditions by conducting ring tests. Computer-aided mathematical models for predicting metal flow and stresses, and for simulating the shape-rolling process were developed. These models utilize the upper-bound and the slab methods of analysis, and are capable of predicting the lateral spread, roll-separating force, roll torque and local stresses, strains and strain rates. This computer-aided design (CAD) system is also capable of simulating the actual rolling process and thereby designing roll-pass schedule in rolling of an airfoil or similar shape. The predictions from the CAD system were verified with respect to cold rolling of mild steel plates. The system is being applied to cold and hot isothermal rolling of an airfoil shape, and will be verified with respect to laboratory experiments under controlled conditions.

  17. Design and implementation of a bluetooth-based band-aid pulse rate sensor

    NASA Astrophysics Data System (ADS)

    Kumar, Prashanth S.; Oh, Sechang; Rai, Pratyush; Kwon, Hyeokjun; Banerjee, Nilanjan; Varadan, Vijay K.

    2011-04-01

    Remote patient monitoring systems capable of collecting vital patient data such as blood pressure readings, Electrocardiograph (ECG) waveforms, and heart rate can obviate the need for repeated visits to the hospital. Moreover, such systems that continuously monitor the human physiology can provide valuable data to prognosticate the onset of critical health problems. The key to such remote health diagnostics is the design of minimally intrusive, low cost sensors that do not impede a patient's quotidian life but at the same time collect reliable noise free data. To this end, in this paper, we design and implement a Bluetooth-based wireless sensor system with a disposable sensor element and a reusable wireless component that can be worn as a "band-aid". The sensor is a piezoelectric polymer film placed on the wrist in proximity to the radial artery. The band-aid sized sensor allows non-intrusive monitoring of the pulsatile flow of blood in the artery. The sensor, using the Bluetooth module, can communicate with any Bluetooth enabled computer, mobile phone, or PDA. The data collected from the patient can be remotely viewed and analyzed by a physician.

  18. Integrated computer-aided retinal photocoagulation system

    NASA Astrophysics Data System (ADS)

    Barrett, Steven F.; Wright, Cameron H. G.; Oberg, Erik D.; Rockwell, Benjamin A.; Cain, Clarence P.; Jerath, Maya R.; Rylander, Henry G., III; Welch, Ashley J.

    1996-05-01

    Successful retinal tracking subsystem testing results in vivo on rhesus monkeys using an argon continuous wave laser and an ultra-short pulse laser are presented. Progress on developing an integrated robotic retinal laser surgery system is also presented. Several interesting areas of study have developed: (1) 'doughnut' shaped lesions that occur under certain combinations of laser power, spot size, and irradiation time complicating measurements of central lesion reflectance, (2) the optimal retinal field of view to achieve simultaneous tracking and lesion parameter control, and (3) a fully digital versus a hybrid analog/digital tracker using confocal reflectometry integrated system implementation. These areas are investigated in detail in this paper. The hybrid system warrants a separate presentation and appears in another paper at this conference.

  19. Enhancing Engineering Computer-Aided Design Education Using Lectures Recorded on the PC

    ERIC Educational Resources Information Center

    McGrann, Roy T. R.

    2006-01-01

    Computer-Aided Engineering (CAE) is a course that is required during the third year in the mechanical engineering curriculum at Binghamton University. The primary objective of the course is to educate students in the procedures of computer-aided engineering design. The solid modeling and analysis program Pro/Engineer[TM] (PTC[R]) is used as the…

  20. Teaching Computer-Aided Design of Fluid Flow and Heat Transfer Engineering Equipment.

    ERIC Educational Resources Information Center

    Gosman, A. D.; And Others

    1979-01-01

    Describes a teaching program for fluid mechanics and heat transfer which contains both computer aided learning (CAL) and computer aided design (CAD) components and argues that the understanding of the physical and numerical modeling taught in the CAL course is essential to the proper implementation of CAD. (Author/CMV)

  1. Accelerating Design of Batteries Using Computer-Aided Engineering Tools (Presentation)

    SciTech Connect

    Pesaran, A.; Kim, G. H.; Smith, K.

    2010-11-01

    Computer-aided engineering (CAE) is a proven pathway, especially in the automotive industry, to improve performance by resolving the relevant physics in complex systems, shortening the product development design cycle, thus reducing cost, and providing an efficient way to evaluate parameters for robust designs. Academic models include the relevant physics details, but neglect engineering complexities. Industry models include the relevant macroscopic geometry and system conditions, but simplify the fundamental physics too much. Most of the CAE battery tools for in-house use are custom model codes and require expert users. There is a need to make these battery modeling and design tools more accessible to end users such as battery developers, pack integrators, and vehicle makers. Developing integrated and physics-based CAE battery tools can reduce the design, build, test, break, re-design, re-build, and re-test cycle and help lower costs. NREL has been involved in developing various models to predict the thermal and electrochemical performance of large-format cells and has used in commercial three-dimensional finite-element analysis and computational fluid dynamics to study battery pack thermal issues. These NREL cell and pack design tools can be integrated to help support the automotive industry and to accelerate battery design.

  2. Precision analysis of passive BD aided pseudolites positioning system

    NASA Astrophysics Data System (ADS)

    Zhang, Xiaoming; Zhao, Yan

    2007-11-01

    In recent years BD (BeiDou positioning system), an active satellite navigation system, has been widely applied in geodetic survey, precise engineering survey and GNC (guide, navigation and control system) of weapons because of its reliability and availability. However, it has several problems on the accuracy, anti-interference and active-positioning. A passive BD aided pseudolites positioning system is introduced in details in this paper. The configuration and the operating principle of system are presented. In analyzing the precision of location, one of the crucial aspects to be studied is how to determine the arrangement of the pseudolites to get the good GDOP, which is discussed in the different arrangements of the pseudolites in this paper. The simulation results show that the VDOP (vertical dilution of precision) of BD is improved due to introducing the pseudolites. The experiments indicate the validity of the methods and the improvement of the positioning precision in the BD aided pseudolite system.

  3. Designing Simulation Systems

    ERIC Educational Resources Information Center

    Twelker, Paul A.

    1969-01-01

    "The purpose of this paper is to outline the approach to designing instructional simulation systems developed at Teaching Research. The 13 phases of simulation design will be summarized, and an effort will be made to expose the vital decision points that confront the designer as he develops simulation experiences. (Author)

  4. The Design and Production of a Procedure Training Aid Using the Procedure Learning Format and the Computer Automated Page Layout (PLA) Routine. Technical Note 12-83.

    ERIC Educational Resources Information Center

    Terrell, William R.; And Others

    This report describes a field application of the Computer Automated Page Layout (PLA) system to the development of a procedure training aid for the SH-3D/H Helicopter, as part of the Training Analysis and Evaluation Group's (TAEG) ongoing development effort to provide tools for the design and publication of technical training aids in a format…

  5. Computer-Aided Personalized System of Instruction: A Program Evaluation.

    ERIC Educational Resources Information Center

    Pear, Joseph J.; Novak, Mark

    1996-01-01

    Presents an evaluation of a computer-aided personalized system of instruction program in two undergraduate psychology courses. The computer presented short essay tests and arranged for students who had completed various assignments satisfactorily to help evaluate other students' mastery of those assignments. Student response generally was…

  6. Aid effectiveness in rebuilding the Afghan health system: a reflection.

    PubMed

    Dalil, Suraya; Newbrander, William; Loevinsohn, Benjamin; Naeem, Ahmad Jan; Griffin, James; Salama, Peter; Momand, Faiz Mohammad

    2014-01-01

    The Paris Declaration defined five components of aid effectiveness: ownership, alignment, harmonisation, managing for results and mutual accountability. Afghanistan, which has received a high level of donor aid for health since 2002, has seen significant improvements in health indicators, expanded access to health services and an increased range of services. Do the impressive health outcomes in this fragile state mean that aid has been effectively utilised? The factors that contributed to the success of the Ministry of Public Health (MOPH)-donor partnership include as follows: Ownership: a realistic role for the MOPH as the steward of the health sector that was clearly articulated to all stakeholders; Donor alignment: donor coordination and collaboration initiated by the MOPH; Joint decisions: participatory decision-making by the MOPH and donors, such as the major decision to use contracts with nongovernmental organisations for health service delivery; Managing for results: basing programmes on available evidence, supplementing that evidence where possible and performance monitoring of health-sector activities using multiple data sources; Reliable aid flows: the availability of sufficient donor funding for more than 10 years for MOPH priorities, such as the Basic Package of Health Services, and other programmes that boosted system development and capacity building; Human factors: these include a critical mass of individuals with the right experience and expertise being deployed at the right time and able to look beyond agency mandates and priorities to support sector reform and results. These factors, which made aid to Afghanistan effective, can be applied in other countries. PMID:24922192

  7. Aid effectiveness in rebuilding the Afghan health system: A reflection

    PubMed Central

    Dalil, Suraya; Newbrander, William; Loevinsohn, Benjamin; Naeem, Ahmad Jan; Griffin, James; Salama, Peter; Momand, Faiz Mohammad

    2014-01-01

    The Paris Declaration defined five components of aid effectiveness: ownership, alignment, harmonisation, managing for results and mutual accountability. Afghanistan, which has received a high level of donor aid for health since 2002, has seen significant improvements in health indicators, expanded access to health services and an increased range of services. Do the impressive health outcomes in this fragile state mean that aid has been effectively utilised? The factors that contributed to the success of the Ministry of Public Health (MOPH)-donor partnership include as follows: Ownership: a realistic role for the MOPH as the steward of the health sector that was clearly articulated to all stakeholders; Donor alignment: donor coordination and collaboration initiated by the MOPH; Joint decisions: participatory decision-making by the MOPH and donors, such as the major decision to use contracts with nongovernmental organisations for health service delivery; Managing for results: basing programmes on available evidence, supplementing that evidence where possible and performance monitoring of health-sector activities using multiple data sources; Reliable aid flows: the availability of sufficient donor funding for more than 10 years for MOPH priorities, such as the Basic Package of Health Services, and other programmes that boosted system development and capacity building; Human factors: these include a critical mass of individuals with the right experience and expertise being deployed at the right time and able to look beyond agency mandates and priorities to support sector reform and results. These factors, which made aid to Afghanistan effective, can be applied in other countries. PMID:24922192

  8. [Diseases of digestive system in patients with AIDS].

    PubMed

    Brbmolić, B; Jevtović, Dj; Ranin, J; Salemović, D; Zerjav, S

    1992-11-01

    Human immunodeficiency virus infection can affect the entire gastrointestinal tract and hepatobiliary system. Gastrointestinal abnormalities in acquired immunodeficiency syndrome are common and may relate to opportunistic inections and tumors, diseases which are usual in the anti-HIV negative population also, and disease of unknown aethiology, such as wasting syndrome and recurrent diarrhoeal illness. Diarrhoea and weight loss are found in more than 50% of patients with AIDS. Gastrointestinal manifestations range in severity from the discomfort of oral and perianal infections, through life threatening diarrhoea due to intestinal cryptosporidiosis. The approach to the patient with AIDS and gastrointestinal or hepatobiliary disorders is oriented toward diagnosing treatable aethiologies and avoiding unnecessary invasive procedures. Although the final prognosis of full developed AIDS is poor, management of gastrointestinal disease may be improved by accurate diagnosis. PMID:18170973

  9. 23 CFR 636.104 - Does this part apply to all Federal-aid design-build projects?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.104 Does this part apply to all Federal-aid design-build projects? The provisions of this part apply to all Federal-aid design-build... 23 Highways 1 2011-04-01 2011-04-01 false Does this part apply to all Federal-aid...

  10. Design of multivariable feedback control systems via spectral assignment

    NASA Technical Reports Server (NTRS)

    Mielke, R. R.; Tung, L. J.; Marefat, M.

    1983-01-01

    The applicability of spectral assignment techniques to the design of multivariable feedback control systems was investigated. A fractional representation design procedure for unstable plants is presented and illustrated with an example. A computer aided design software package implementing eigenvalue/eigenvector design procedures is described. A design example which illustrates the use of the program is explained.

  11. Designing optimal transportation networks: a knowledge-based computer-aided multicriteria approach

    SciTech Connect

    Tung, S.I.

    1986-01-01

    The dissertation investigates the applicability of using knowledge-based expert systems (KBES) approach to solve the single-mode (automobile), fixed-demand, discrete, multicriteria, equilibrium transportation-network-design problem. Previous works on this problem has found that mathematical programming method perform well on small networks with only one objective. Needed is a solution technique that can be used on large networks having multiple, conflicting criteria with different relative importance weights. The KBES approach developed in this dissertation represents a new way to solve network design problems. The development of an expert system involves three major tasks: knowledge acquisition, knowledge representation, and testing. For knowledge acquisition, a computer aided network design/evaluation model (UFOS) was developed to explore the design space. This study is limited to the problem of designing an optimal transportation network by adding and deleting capacity increments to/from any link in the network. Three weighted criteria were adopted for use in evaluating each design alternative: cost, average V/C ratio, and average travel time.

  12. Computer-Aided Engineering of Batteries for Designing Better Li-Ion Batteries (Presentation)

    SciTech Connect

    Pesaran, A.; Kim, G. H.; Smith, K.; Lee, K. J.; Santhanagopalan, S.

    2012-02-01

    This presentation describes the current status of the DOE's Energy Storage R and D program, including modeling and design tools and the Computer-Aided Engineering for Automotive Batteries (CAEBAT) program.

  13. Analyzing Automated Instructional Systems: Metaphors from Related Design Professions.

    ERIC Educational Resources Information Center

    Jonassen, David H.; Wilson, Brent G.

    Noting that automation has had an impact on virtually every manufacturing and information operation in the world, including instructional design (ID), this paper suggests three basic metaphors for automating instructional design activities: (1) computer-aided design and manufacturing (CAD/CAM) systems; (2) expert system advisor systems; and (3)…

  14. An Investigation into Computer Aided Drafting and Design (CADD) in the Saginaw Area from the Viewpoint of Mechanical Drafting and Design Employers.

    ERIC Educational Resources Information Center

    Irwin, John L.

    The extent to which computer-aided drafting and design (CADD) was being used in local businesses in Saginaw, Michigan, was investigated. Focuses of a literature review were types of CADD systems, categories of CADD users, and the symbiotic relationship between industry and education in providing CADD training. The survey questionnaire was…

  15. Analytical Design Package (ADP2): A computer aided engineering tool for aircraft transparency design

    NASA Technical Reports Server (NTRS)

    Wuerer, J. E.; Gran, M.; Held, T. W.

    1994-01-01

    The Analytical Design Package (ADP2) is being developed as a part of the Air Force Frameless Transparency Program (FTP). ADP2 is an integrated design tool consisting of existing analysis codes and Computer Aided Engineering (CAE) software. The objective of the ADP2 is to develop and confirm an integrated design methodology for frameless transparencies, related aircraft interfaces, and their corresponding tooling. The application of this methodology will generate high confidence for achieving a qualified part prior to mold fabrication. ADP2 is a customized integration of analysis codes, CAE software, and material databases. The primary CAE integration tool for the ADP2 is P3/PATRAN, a commercial-off-the-shelf (COTS) software tool. The open architecture of P3/PATRAN allows customized installations with different applications modules for specific site requirements. Integration of material databases allows the engineer to select a material, and those material properties are automatically called into the relevant analysis code. The ADP2 materials database will be composed of four independent schemas: CAE Design, Processing, Testing, and Logistics Support. The design of ADP2 places major emphasis on the seamless integration of CAE and analysis modules with a single intuitive graphical interface. This tool is being designed to serve and be used by an entire project team, i.e., analysts, designers, materials experts, and managers. The final version of the software will be delivered to the Air Force in Jan. 1994. The Analytical Design Package (ADP2) will then be ready for transfer to industry. The package will be capable of a wide range of design and manufacturing applications.

  16. Program Helps Decompose Complex Design Systems

    NASA Technical Reports Server (NTRS)

    Rogers, James L., Jr.; Hall, Laura E.

    1995-01-01

    DeMAID (Design Manager's Aid for Intelligent Decomposition) computer program is knowledge-based software system for ordering sequence of modules and identifying possible multilevel structure for design problems such as large platforms in outer space. Groups modular subsystems on basis of interactions among them. Saves considerable amount of money and time in total design process, particularly in new design problem in which order of modules has not been defined. Originally written for design problems, also applicable to problems containing modules (processes) that take inputs and generate outputs. Available in three machine versions: Macintosh written in Symantec's Think C 3.01, Sun, and SGI IRIS in C language.

  17. Computer-Aided Design Of Turbine Blades And Vanes

    NASA Technical Reports Server (NTRS)

    Hsu, Wayne Q.

    1988-01-01

    Quasi-three-dimensional method for determining aerothermodynamic configuration of turbine uses computer-interactive analysis and design and computer-interactive graphics. Design procedure executed rapidly so designer easily repeats it to arrive at best performance, size, structural integrity, and engine life. Sequence of events in aerothermodynamic analysis and design starts with engine-balance equations and ends with boundary-layer analysis and viscous-flow calculations. Analysis-and-design procedure interactive and iterative throughout.

  18. NREL Software Aids Offshore Wind Turbine Designs (Fact Sheet)

    SciTech Connect

    Not Available

    2013-10-01

    NREL researchers are supporting offshore wind power development with computer models that allow detailed analyses of both fixed and floating offshore wind turbines. While existing computer-aided engineering (CAE) models can simulate the conditions and stresses that a land-based wind turbine experiences over its lifetime, offshore turbines require the additional considerations of variations in water depth, soil type, and wind and wave severity, which also necessitate the use of a variety of support-structure types. NREL's core wind CAE tool, FAST, models the additional effects of incident waves, sea currents, and the foundation dynamics of the support structures.

  19. Residential photovoltaic system designs

    SciTech Connect

    Russell, M. C.

    1981-01-01

    A project to develop Residential Photovoltaic Systems has begun at Massachusetts Institute of Technology Lincoln Laboratory with the construction and testing of five Prototype Systems. All of these systems utilize a roof-mounted photovoltaic array and allow excess solar-generated electric energy to be fed back to the local utility grid, eliminating the need for on-site storage. Residential photovoltaic system design issues are discussed and specific features of the five Prototype Systems now under test are presented.

  20. Control system design method

    DOEpatents

    Wilson, David G.; Robinett, III, Rush D.

    2012-02-21

    A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

  1. The Research of Computer Aided Farm Machinery Designing Method Based on Ergonomics

    NASA Astrophysics Data System (ADS)

    Gao, Xiyin; Li, Xinling; Song, Qiang; Zheng, Ying

    Along with agricultural economy development, the farm machinery product type Increases gradually, the ergonomics question is also getting more and more prominent. The widespread application of computer aided machinery design makes it possible that farm machinery design is intuitive, flexible and convenient. At present, because the developed computer aided ergonomics software has not suitable human body database, which is needed in view of farm machinery design in China, the farm machinery design have deviation in ergonomics analysis. This article puts forward that using the open database interface procedure in CATIA to establish human body database which aims at the farm machinery design, and reading the human body data to ergonomics module of CATIA can product practical application virtual body, using human posture analysis and human activity analysis module to analysis the ergonomics in farm machinery, thus computer aided farm machinery designing method based on engineering can be realized.

  2. A review of HIV/AIDS system-level interventions

    PubMed Central

    Bauermeister, José A.; Tross, Susan; Ehrhardt, Anke A.

    2010-01-01

    The escalating HIV/AIDS epidemic worldwide demands that on-going prevention efforts be strengthened, disseminated, and scaled-up. System-level interventions refer to programs aiming to improve the functioning of an agency as well as the delivery of its services to the community. System-level interventions are a promising approach to HIV/AIDS prevention because they focus on (a) improving the agency’s ability to adopt evidence-based HIV prevention and care programs; (b) develop and establish policies and procedures that maximize the sustainability of on-going prevention and care efforts; and (c) improve decision-making processes such as incorporating the needs of communities into their tailored services. We reviewed studies focusing on system-level interventions by searching multiple electronic abstracting indices, including PsycInfo, PubMed, and ProQuest. Twenty-three studies out of 624 peer-reviewed studies (published from January 1985 to February 2007) met study criteria. Most of the studies focused on strengthening agency infrastructure, while other studies included collaborative partnerships and technical assistance programs. Our findings suggest that system-level interventions are promising in strengthening HIV/AIDS prevention and treatment efforts. Based on our findings, we propose recommendations for future work in developing and evaluating system-level interventions. PMID:18369722

  3. Computer-aided design of stripline ferrite junction circulators

    NASA Technical Reports Server (NTRS)

    Uzdy, Z.

    1980-01-01

    A general design procedure is presented for stripline Y-junction circulators employing solid dielectric between ground planes. The resonator design and impedance matching are derived in a form suitable for computer evaluation. The procedure is applicable to cases where either the circulator bandwidth or the ground plane spacing is specified. An experimental S-band switching circulator design illustrates the technique.

  4. Instructional Design: System Strategies.

    ERIC Educational Resources Information Center

    Ledford, Bruce R.; Sleeman, Phillip J.

    This book is intended as a source for those who desire to apply a coherent system of instructional design, thereby insuring accountability. Chapter 1 covers the instructional design process, including: instructional technology; the role of evaluation; goal setting; the psychology of teaching and learning; task analysis; operational objectives;…

  5. Creation of Anatomically Accurate Computer-Aided Design (CAD) Solid Models from Medical Images

    NASA Technical Reports Server (NTRS)

    Stewart, John E.; Graham, R. Scott; Samareh, Jamshid A.; Oberlander, Eric J.; Broaddus, William C.

    1999-01-01

    Most surgical instrumentation and implants used in the world today are designed with sophisticated Computer-Aided Design (CAD)/Computer-Aided Manufacturing (CAM) software. This software automates the mechanical development of a product from its conceptual design through manufacturing. CAD software also provides a means of manipulating solid models prior to Finite Element Modeling (FEM). Few surgical products are designed in conjunction with accurate CAD models of human anatomy because of the difficulty with which these models are created. We have developed a novel technique that creates anatomically accurate, patient specific CAD solids from medical images in a matter of minutes.

  6. Remote Systems Design & Deployment

    SciTech Connect

    Bailey, Sharon A.; Baker, Carl P.; Valdez, Patrick LJ

    2009-08-28

    The Pacific Northwest National Laboratory (PNNL) was tasked by Washington River Protection Solutions, LLC (WRPS) to provide information and lessons learned relating to the design, development and deployment of remote systems, particularly remote arm/manipulator systems. This report reflects PNNL’s experience with remote systems and lays out the most important activities that need to be completed to successfully design, build, deploy and operate remote systems in radioactive and chemically contaminated environments. It also contains lessons learned from PNNL’s work experiences, and the work of others in the national laboratory complex.

  7. CFD Aided Design and Optimization of Francis Turbine Runners

    NASA Astrophysics Data System (ADS)

    Ayancik, Fatma; Demirel, Gizem; Celebioglu, Kutay; Acar, Erdem; Aradag, Selin; ETU Hydro Research Center Team

    2014-11-01

    Francis turbines are commonly used for hydroelectric power plants with their wide range of flow rate and head values. They are composed of five main components and they generate energy with the help of the runner connected to the generator. Therefore, runner is the most important part of a Francis turbine. All components of turbines are linked and they are designed to maximize the turbine efficiency. The dimensions of the runner vary depending on the design discharge, head and the speed of the rotor of the generators. In this study, a design methodology is developed to design turbine runners with the help of computational fluid dynamics and is applied to the runner design of three different hydroelectric power plant turbines. Multi objective design optimization is also performed and the response surfaces are investigated to obtain maximum turbine efficiency and cavitation free design. This study is financially supported by Turkish Ministry of Development.

  8. A prototype expert system for fishway design.

    PubMed

    Bender, M J; Katopodis, C; Simonovic, S P

    1992-12-01

    The design of structures for fish passage in rivers and streams provides an opportunity to apply expert system concepts to a design problem. Fishways contribute to the sustainable development of water resources projects by providing a path that allows fish migrations to be maintained. A prototype expert system (FDES) has been developed to recommend the most suitable fishway type for given design conditions. A recommendation is provided on the basis of fishway hydraulics, fish passage performance, and cost requirements. Fishway design demands expertise in various scientific disciplines such as hydrology, hydraulics, and fish biology. Expert system technology may be used to reduce design time requirements and to serve as a teaching aid to inexperienced engineers by organizing and accessing the cumulative knowledge of the most experienced designers. The rule-based expert system development tool, VP-Expert, supplies the backward chaining control structure for accessing the knowledge within the prototype. PMID:24227094

  9. Designing future photovoltaic systems

    SciTech Connect

    Jones, G.J.

    1984-01-01

    The large scale use of photovoltaic systems to generate our electricity is a dream for the future; but if this dream is to be realized, we must understand these systems today. As a result, there has been extensive research into the design and economic tradeoffs of utility interconnected photovoltaic applications. The understanding gained in this process has shown that photovoltaic system design can be a very simple and straight-forward endeavor. This paper reviews those past studies and shows how we have reached the present state of system design evolution. The concept of the utility interactive PV system with energy value determined by the utility's avoided cost will be explored. This concept simplifies the screening of potential applications for economic viability, and we will present several rules-of-thumb for this purpose.

  10. Use of CADD (Computer Aided Drafting and Design) in a construction setting

    SciTech Connect

    Ketcham, D.L.

    1988-01-01

    At the outset of the design for the Defense Waste Processing Facility (DWPF) it was determined to complete over 70 percent of the more than 7000 drawings on a Computer Aided Drafting and Design (CADD) system. This ambitious goal required the development of an integrated data base for plant design software systems to service a multi-discipline, engineering and management environment for the complex one-of-a-kind mega project. The implementation involved extensive training, special accounting and security provisions to meet QA requirements. It was found to be effective to train engineers as well as operators so that technical personnel could have direct access to the drawing files. This was particularly useful when designing and laying out close tolerance equipment in remotely maintained cells where clearances are critical. It was also beneficial to have the terminals located in the same areas as the engineering staff. Background drawings were maintained by one discipline and used as a reference file by the other disciplines. This reduced the chances of interferences and insured that the latest revisions were in use. 2 figs.

  11. Designing automatic resupply systems.

    PubMed

    Harding, M L

    1999-02-01

    This article outlines the process for designing and implementing autoresupply systems. The planning process includes determination of goals and appropriate participation. Different types of autoresupply mechanisms include kanban, breadman, consignment, systems contracts, and direct shipping from an MRP schedule. PMID:10345630

  12. Digital systems design language

    NASA Technical Reports Server (NTRS)

    Shiva, S. G.

    1979-01-01

    Digital Systems Design Language (DDL) is implemented on the SEL-32 Computer Systems. The detaileds of the language, the translator, and the simulator, and the smulator programs are given. Several example descriptions and a tutorial on hardware description languages are provided, to guide the user.

  13. Computer-aided design tools for economical MEMS fabrication processes

    NASA Astrophysics Data System (ADS)

    Schneider, Christian; Priebe, Andreas; Brueck, Rainer; Hahn, Kai

    1999-03-01

    Since the early 70s when microsystem technology was first introduce an enormous market for MST-products has been developed. Airbag sensors, micro pumps, ink jet nozzles etc. and the market is just about to start up. Establishing these products for a reasonable price requires mass production. Meanwhile, also computer-based design-tools have been developed in order to reduce the expenses for MST-design. In contrast to other physical design processes like e.g. in micro electronics, MEMS physical design is characterized by the fact that each product requires a tailored sequence of fabrication steps, usually selected from a variety of processing alternatives. The selection from these alternatives is based on economical constraints. Therefore, the design has a strong influence on the money and time spent to take an MST-product to market.

  14. CFD Aided Design and Production of Hydraulic Turbines

    NASA Astrophysics Data System (ADS)

    Kaplan, Alper; Cetinturk, Huseyin; Demirel, Gizem; Ayli, Ece; Celebioglu, Kutay; Aradag, Selin; ETU Hydro Research Center Team

    2014-11-01

    Hydraulic turbines are turbo machines which produce electricity from hydraulic energy. Francis type turbines are the most common one in use today. The design of these turbines requires high engineering effort since each turbine is tailor made due to different head and discharge. Therefore each component of the turbine is designed specifically. During the last decades, Computational Fluid Dynamics (CFD) has become very useful tool to predict hydraulic machinery performance and save time and money for designers. This paper describes a design methodology to optimize a Francis turbine by integrating theoretical and experimental fundamentals of hydraulic machines and commercial CFD codes. Specific turbines are designed and manufactured with the help of a collaborative CFD/CAD/CAM methodology based on computational fluid dynamics and five-axis machining for hydraulic electric power plants. The details are presented in this study. This study is financially supported by Turkish Ministry of Development.

  15. Anti AIDS drug design with the help of neural networks

    NASA Astrophysics Data System (ADS)

    Tetko, I. V.; Tanchuk, V. Yu.; Luik, A. I.

    1995-04-01

    Artificial neural networks were used to analyze and predict the human immunodefiency virus type 1 reverse transcriptase inhibitors. Training and control set included 44 molecules (most of them are well-known substances such as AZT, TIBO, dde, etc.) The biological activities of molecules were taken from literature and rated for two classes: active and inactive compounds according to their values. We used topological indices as molecular parameters. Four most informative parameters (out of 46) were chosen using cluster analysis and original input parameters' estimation procedure and were used to predict activities of both control and new (synthesized in our institute) molecules. We applied pruning network algorithm and network ensembles to obtain the final classifier and avoid chance correlation. The increasing of neural network generalization of the data from the control set was observed, when using the aforementioned methods. The prognosis of new molecules revealed one molecule as possibly active. It was confirmed by further biological tests. The compound was as active as AZT and in order less toxic. The active compound is currently being evaluated in pre clinical trials as possible drug for anti-AIDS therapy.

  16. Computer-Aided Apparel Design in University Curricula.

    ERIC Educational Resources Information Center

    Belleau, Bonnie D.; Bourgeois, Elva B.

    1991-01-01

    As computer-assisted design (CAD) become an integral part of the fashion industry, universities must integrate CAD into the apparel curriculum. Louisiana State University's curriculum enables students to collaborate in CAD problem solving with industry personnel. (SK)

  17. Improved plug valve computer-aided design of plug element

    SciTech Connect

    Wordin, J.J.

    1990-02-01

    The purpose of this document is to present derivations of equations for the design of a plug valve and to present a computer program which performs the design calculations based on the derivations. The valve is based on a plug formed from a tractrix of revolution called a pseudosphere. It is of interest to be able to calculate various parameters for the plug for design purposes. For example, the surface area, volume, and center of gravity are important to determine friction and wear of the valve. A computer program in BASIC has been written to perform the design calculations. The appendix contains a computer program listing and verifications of results using approximation methods. A sample run is included along with necessary computer commands to run the program. 1 fig.

  18. WASTE REDUCTION USING COMPUTER-AIDED DESIGN TOOLS

    EPA Science Inventory

    Growing environmental concerns have spurred considerable interest in pollution prevention. In most instances, pollution prevention involves introducing radical changes to the design of processes so that waste generation is minimized.
    Process simulators can be effective tools i...

  19. Computer-aided design of a proton pump

    NASA Technical Reports Server (NTRS)

    New, Michael H.; Pohorille, Andrew; Chang, Sherwood (Technical Monitor)

    1997-01-01

    The use of transmembrane proton gradients in energy transduction is an almost universal feature of life on earth. These proton gradients are established and maintained by specialized assemblies of proteins which actively pump protons across membranes. One broad class of proton pumps uses captured light energy to drive the proton pumping. Our goal is to elucidate the minimum structural requirements of a light-driven proton-pump. There are two basic components to a simple light-driven proton pump: a source of photo-generated protons and a "gate-keeper" which prevents these protons from reattaching themselves to their source. A wide variety of molecules in the membrane, even as simple as polycyclic aromatic hydrocarbons, are capable of releasing protons when illuminated. Our work is therefore focused on the design of the "gate-keeper." Our initial model involves a pair of proton acceptors, coupled to each other by a transient water bridge, and supported in the membrane by a small bundle of peptide helices. Upon illumination, the proton source transfers its proton to the:- first acceptor of the gate-keeper. While the reverse reaction is highly probable, all that is needed to ensure irreversibility is a nonvanishing probability that the proton will be transferred to the second acceptor across a transient water bridge. Back transfer of the proton to the first acceptor, and thence to the proton source, is impeded by the free energy required to move the proton uphill towards the. proton source and by the disruption of the transient water bridge. As a prototypical water-bridged proton transfer system, we are studying the transfer of a proton across a water bridge from a formic acid to a formate anion. With a pK(sub alpha), of 3.7. formic acid is a good model for the acidic amino acids glutamate and aspartate which are good candidates for gate-keeper proton acceptors. Simulations of proton transfer reactions in a membrane are complicated by the quantum mechanical nature of

  20. Validation of space/ground antenna control algorithms using a computer-aided design tool

    NASA Technical Reports Server (NTRS)

    Gantenbein, Rex E.

    1995-01-01

    The validation of the algorithms for controlling the space-to-ground antenna subsystem for Space Station Alpha is an important step in assuring reliable communications. These algorithms have been developed and tested using a simulation environment based on a computer-aided design tool that can provide a time-based execution framework with variable environmental parameters. Our work this summer has involved the exploration of this environment and the documentation of the procedures used to validate these algorithms. We have installed a variety of tools in a laboratory of the Tracking and Communications division for reproducing the simulation experiments carried out on these algorithms to verify that they do meet their requirements for controlling the antenna systems. In this report, we describe the processes used in these simulations and our work in validating the tests used.

  1. Chemical feedstock from hardwood by organosolv hydrolysis: Computer-aided process design and economic evaluation

    NASA Astrophysics Data System (ADS)

    Nguyen, X. N.

    1982-12-01

    A two stage catalyzed organosolv plant producing ethanol, furfural, acetic acid, and soluble lignin from wood waste was investigated. The GEMS computer system was used to aid the preliminary design and cost estimation of the proposed wood chemical plant. For a plant processing 1000 ovendry tons of wood per day, a capital investment of $66 million and an operating expense of about $20 million per year were estimated. The capital cost calculated compares favorably with other published estimates. Sensitivity analyses of some key factors in the proposed process disclose that the recovery efficiency of ethanol used in the lignin extraction stage is most important in determining the process economics. Ethanol solvent recovery of about 98% is required. At 95% recovery efficiency, conversion to glucose in the acid hydrolysis step above 90% is necessary for the ethanol selling price to be comparable to the current market price.

  2. Computer aided solar house design made of ``Guadua`` in Bogota, Colombia

    SciTech Connect

    Lozano, M.C.; Chalfoun, N.V.

    1995-11-01

    Bogota, Colombia, is the third highest capital in South America, its location near the equator assures high altitudes over the horizon and almost 5 hours of daily mean sunshine. Since 1981, efforts for using natural energy instead of nonrenewable fuel have been targeted to Colombia`s residential construction industry. This paper focuses on a computer aided design process for passive solar low-income row housing in Bogota. Thermal comfort for this tropical climate has been achieved through employing ``Guadua,`` a strong bamboo specie,as an alternative wall system to the traditional brick, adobe, or concrete structures. Through computer analysis, several energy conservation and passive solar strategies have been optimized for a case study row housing type common to the region. The load savings compared to a 6 inch CMU house totaled 72%, while the operating cost has been reduced by 71%. Furthermore, this lightweight and inexpensive ``Guadua`` material has reduced the construction cost by 30%.

  3. TOWARD THE COMPUTER-AIDED DESIGN OF ION SEQUESTERING AGENTS

    SciTech Connect

    Hay, Benjamin

    2008-01-01

    A major impediment to introduction of new extractants to practical use is the large cost and long lead times for synthesis and testing of candidate molecules. Toward the goal of reducing this experimental burden, this talk describes a computational approach to the design of molecular receptors that are structurally organized for optimal coordination with ions. With a molecular-level understanding of how host architecture influences ion-binding affinity, it is possible to identify promising potential extractants before they are prepared and tested. Exploiting powerful concepts embodied in structure-based drug design to bear on host design, we have devised novel algorithms for building potential host structures from molecular fragments and rapid methods for comparing the binding-site organization of the resulting candidates. The result is a computer software program, called HostDesigner, which can generate and evaluate millions of new molecular structures per minute on a desktop personal computer. The utility of this software has been illustrated in the structural design of cation receptors such as crown ethers and anion receptors bearing urea groups.

  4. Integrated system design report

    SciTech Connect

    Not Available

    1989-07-01

    The primary objective of the integrated system test phase is to demonstrate the commercial potential of a coal fueled diesel engine in its actual operating environment. The integrated system in this project is defined as a coal fueled diesel locomotive. This locomotive, shown on drawing 41D715542, is described in the separate Concept Design Report. The test locomotive will be converted from an existing oil fueled diesel locomotive in three stages, until it nearly emulates the concept locomotive. Design drawings of locomotive components (diesel engine, locomotive, flatcar, etc.) are included.

  5. Interactive computer aided design of electric machines and electromagnetic apparatus (invited)

    NASA Astrophysics Data System (ADS)

    Freeman, E. M.

    1982-11-01

    The design of electromagnetic devices in industry is still largely done using traditional techniques. Early computing facilities were costly to use and limited to alphanumeric applications. The application of numerical methods, mainly finite elements, to the solution of electromagnetic field problems, proved to be difficult to implement initially due to input/output problems. These difficulties were completely obviated by the advent of inexpensive microcomputers and low cost interactive graphics. However, it is still uncommon to find these new methods being employed as part of the normal electrical design process. Meanwhile, in parallel, there has been a massive growth of computer-aided methods applied to all aspects of mechanical engineering design and drafting, CADCAM. The trend is towards small, powerful, expandable, dedicated computer systems equipped with high resolution interactive graphics, which can be connected via a fast datalink. These are commonly available, complete with software, as turnkey systems. The advantages of CADCAM are manifold: Lower costs, higher productivity, higher quality products, with shorter lead times. The introduction of CADCAM will result in organisational as well as technical changes. The major change will be in the way people think.

  6. Effect of image variation on computer-aided detection systems

    NASA Astrophysics Data System (ADS)

    Rabbani, S. P.; Maduskar, P.; Philipsen, R. H. H. M.; Hogeweg, L.; van Ginneken, B.

    2014-03-01

    As the importance of Computer Aided Detection (CAD) systems application is rising in medical imaging field due to the advantages they generate; it is essential to know their weaknesses and try to find a proper solution for them. A common possible practical problem that affects CAD systems performance is: dissimilar training and testing datasets declines the efficiency of CAD systems. In this paper normalizing images is proposed, three different normalization methods are applied on chest radiographs namely (1) Simple normalization (2) Local Normalization (3) Multi Band Local Normalization. The supervised lung segmentation CAD system performance is evaluated on normalized chest radiographs with these three different normalization methods in terms of Jaccard index. As a conclusion the normalization enhances the performance of CAD system and among these three normalization methods Local Normalization and Multi band Local normalization improve performance of CAD system more significantly than the simple normalization.

  7. Computer-aided design of optimal infrared detector preamplifiers

    NASA Astrophysics Data System (ADS)

    Frodsham, D. G.; Baker, D. J.

    1980-01-01

    The paper presents a mathematical model for a frequency-compensated detector-preamplifier suitable for cryogenically cooled IR sensors operating under low background conditions. By the use of a digital computer, this model can rapidly select the optimal combination of design values. These parameters include load resistance, compensation resistance, compensation capacitance, chopping frequency, and detector area to meet desired specifications of noise equivalent power, frequency response, dynamic range, and level of output noise. This computer-assisted optimal design approach is demonstrated using a contemporary spaceborne infrared sensor application, i.e., a cryogenically cooled dual-channel radiometer.

  8. Distributed System Design Checklist

    NASA Technical Reports Server (NTRS)

    Hall, Brendan; Driscoll, Kevin

    2014-01-01

    This report describes a design checklist targeted to fault-tolerant distributed electronic systems. Many of the questions and discussions in this checklist may be generally applicable to the development of any safety-critical system. However, the primary focus of this report covers the issues relating to distributed electronic system design. The questions that comprise this design checklist were created with the intent to stimulate system designers' thought processes in a way that hopefully helps them to establish a broader perspective from which they can assess the system's dependability and fault-tolerance mechanisms. While best effort was expended to make this checklist as comprehensive as possible, it is not (and cannot be) complete. Instead, we expect that this list of questions and the associated rationale for the questions will continue to evolve as lessons are learned and further knowledge is established. In this regard, it is our intent to post the questions of this checklist on a suitable public web-forum, such as the NASA DASHLink AFCS repository. From there, we hope that it can be updated, extended, and maintained after our initial research has been completed.

  9. Assembly design system based on engineering connection

    NASA Astrophysics Data System (ADS)

    Yin, Wensheng

    2016-05-01

    An assembly design system is an important part of computer-aided design systems, which are important tools for realizing product concept design. The traditional assembly design system does not record the connection information of production on the engineering layer; consequently, the upstream design idea cannot be fully used in the downstream design. An assembly design model based on the relationship of engineering connection is presented. In this model, all nodes are divided into two categories: The component and the connection. Moreover, the product is constructed on the basis of the connection relationship of the components. The model is an And/Or graph and has the ability to record all assembly schemes. This model records only the connection information that has engineering application value in the product design. In addition, this model can significantly reduce the number of combinations, and is very favorable for the assembly sequence planning in the downstream. The system contains a connection knowledge system that can be mapped to the connection node, and the connection knowledge obtained in practice can be returned to the knowledge system. Finally, VC++ 6.0 is used to develop a prototype system called Connect-based Assembly Planning (CAP). The relationship between the CAP system and the commercial assembly design system is also established.

  10. Laser imaging and computer-aided design and computer-aided manufacture in prosthetics and orthotics.

    PubMed

    Spaeth, John P

    2006-02-01

    Although Hanger Orthopedic Group, Inc., has been developing clinical protocols for its INSIGNIA scanner for more than 2 years, there are many applications that are currently in development and will be released over the next 2-year period after this publication. It is the goal of Hanger Orthopedic Group, Inc., to replace all plaster casting procedures with the laser scan and move toward a paperless environment where all images and documents are passed through its virtual network. INSIGNIA currently has five major production centers throughout the United States, which support more than 600 INSIGNIA certified clinicians. These clinicians staff more than 600 clinics in North America, all under the Hanger company name. The central fabrication service and the central design center processes hundreds of shapes per day (Fig. 27). So that any clinician in the field can use the expertise of the central designers and central fabricators to help with overflow or problems they might be having, the network that exists within Hanger is tied together and enhanced by INSIGNIA. Through virtual modification and centralization of these services, each patient receives the virtual collaboration of several clinicians with a total of years of experience. INSIGNIA has enhanced the patient experience. The enhancement is not only in removing the plaster from the process, but also in exposing each patient to the team of prosthetic experts working collaboratively behind the scenes. The rehabilitation industry continues to be bombarded with compliance paperwork and justifications. The INSIGNIA scan and resulting measurement reports give inherent strength to justifications based on volume change, surgical revisions, or tissue change. The files are kept in a data warehouse where they are vaulted and preserved presumably forever. Also, any of the shape graphics or measurement instruments can be printed into a discrete report that can become part of the patient's permanent record. Many physicians

  11. Computer-aided design and analysis of mechanisms

    NASA Technical Reports Server (NTRS)

    Knight, F. L.

    1982-01-01

    An introduction to the computer programs developed to assist in the design and analysis of mechanisms is presented. A survey of the various types of programs which are available is given, and the most widely used programs are compared. The way in which the programs are used is discussed, and demonstrated with an example.

  12. Armchair Survey Sampling: An Aid in Teaching Survey Design.

    ERIC Educational Resources Information Center

    Thompson, M. E.

    A fictitious community of 583 households was set up to simulate a survey population, and was used in two laboratory assignments where students "interviewed" householders by a quota sampling procedure and tested the performance of several probability sampling designs. (Author/JEG)

  13. Accuracy of different types of computer-aided design/computer-aided manufacturing surgical guides for dental implant placement

    PubMed Central

    Geng, Wei; Liu, Changying; Su, Yucheng; Li, Jun; Zhou, Yanmin

    2015-01-01

    Purpose: To evaluate the clinical outcomes of implants placed using different types of computer-aided design/computer-aided manufacturing (CAD/CAM) surgical guides, including partially guided and totally guided templates, and determine the accuracy of these guides Materials and methods: In total, 111 implants were placed in 24 patients using CAD/CAM surgical guides. After implant insertion, the positions and angulations of the placed implants relative to those of the planned ones were determined using special software that matched pre- and postoperative computed tomography (CT) images, and deviations were calculated and compared between the different guides and templates. Results: The mean angular deviations were 1.72 ± 1.67 and 2.71 ± 2.58, the mean deviations in position at the neck were 0.27 ± 0.24 and 0.69 ± 0.66 mm, the mean deviations in position at the apex were 0.37 ± 0.35 and 0.94 ± 0.75 mm, and the mean depth deviations were 0.32 ± 0.32 and 0.51 ± 0.48 mm with tooth- and mucosa-supported stereolithographic guides, respectively (P < .05 for all). The mean distance deviations when partially guided (29 implants) and totally guided templates (30 implants) were used were 0.54 ± 0.50 mm and 0.89 ± 0.78 mm, respectively, at the neck and 1.10 ± 0.85 mm and 0.81 ± 0.64 mm, respectively, at the apex, with corresponding mean angular deviations of 2.56 ± 2.23° and 2.90 ± 3.0° (P > .05 for all). Conclusions: Tooth-supported surgical guides may be more accurate than mucosa-supported guides, while both partially and totally guided templates can simplify surgery and aid in optimal implant placement. PMID:26309497

  14. Maglev system design considerations

    SciTech Connect

    Coffey, H.T.

    1991-01-01

    Although efforts are now being made to develop magnetic levitation technologies in the United States, they have been underway for two decades in Germany and Japan. The characteristics of maglev systems being considered for implementation in the United States are speculative. A conference was held at Argonne National Laboratory on November 28--29, 1990, to discuss these characteristics and their implications for the design requirements of operational systems. This paper reviews some of the factors considered during that conference.

  15. A computer aided treatment event recognition system in radiation therapy

    SciTech Connect

    Xia, Junyi Mart, Christopher; Bayouth, John

    2014-01-15

    Purpose: To develop an automated system to safeguard radiation therapy treatments by analyzing electronic treatment records and reporting treatment events. Methods: CATERS (Computer Aided Treatment Event Recognition System) was developed to detect treatment events by retrieving and analyzing electronic treatment records. CATERS is designed to make the treatment monitoring process more efficient by automating the search of the electronic record for possible deviations from physician's intention, such as logical inconsistencies as well as aberrant treatment parameters (e.g., beam energy, dose, table position, prescription change, treatment overrides, etc). Over a 5 month period (July 2012–November 2012), physicists were assisted by the CATERS software in conducting normal weekly chart checks with the aims of (a) determining the relative frequency of particular events in the authors’ clinic and (b) incorporating these checks into the CATERS. During this study period, 491 patients were treated at the University of Iowa Hospitals and Clinics for a total of 7692 fractions. Results: All treatment records from the 5 month analysis period were evaluated using all the checks incorporated into CATERS after the training period. About 553 events were detected as being exceptions, although none of them had significant dosimetric impact on patient treatments. These events included every known event type that was discovered during the trial period. A frequency analysis of the events showed that the top three types of detected events were couch position override (3.2%), extra cone beam imaging (1.85%), and significant couch position deviation (1.31%). The significant couch deviation is defined as the number of treatments where couch vertical exceeded two times standard deviation of all couch verticals, or couch lateral/longitudinal exceeded three times standard deviation of all couch laterals and longitudinals. On average, the application takes about 1 s per patient when

  16. A common pharmacophoric footprint for AIDS vaccine design.

    PubMed

    Pisterer, Christoph; Mihailescu, Dan; Smith, Jeremy C; Reed, Jennifer

    2004-07-15

    The most promising target antigen for an HIV vaccine designed using the classic antibody strategy has been the viral coat protein gp120. Unfortunately, its high variability has prevented this approach. We examine here a 15-residue peptide derived from the CD4-binding domain of gp120. By use of molecular dynamics computer simulation, it is shown that despite considerable sequence variation, the three-dimensional structure of the peptide is preserved over the full range of clade-specific sequences. Furthermore, sequences threaded onto the structure exhibit common three-dimensional electrostatic and hydrophobic properties. These common physicochemical characteristics constitute a pharmacophoric footprint that promises to be useful in the design of a synthetic antigen for vaccine development. PMID:15239651

  17. Costs incurred by applying computer-aided design/computer-aided manufacturing techniques for the reconstruction of maxillofacial defects.

    PubMed

    Rustemeyer, Jan; Melenberg, Alex; Sari-Rieger, Aynur

    2014-12-01

    This study aims to evaluate the additional costs incurred by using a computer-aided design/computer-aided manufacturing (CAD/CAM) technique for reconstructing maxillofacial defects by analyzing typical cases. The medical charts of 11 consecutive patients who were subjected to the CAD/CAM technique were considered, and invoices from the companies providing the CAD/CAM devices were reviewed for every case. The number of devices used was significantly correlated with cost (r = 0.880; p < 0.001). Significant differences in mean costs were found between cases in which prebent reconstruction plates were used (€3346.00 ± €29.00) and cases in which they were not (€2534.22 ± €264.48; p < 0.001). Significant differences were also obtained between the costs of two, three and four devices, even when ignoring the cost of reconstruction plates. Additional fees provided by statutory health insurance covered a mean of 171.5% ± 25.6% of the cost of the CAD/CAM devices. Since the additional fees provide financial compensation, we believe that the CAD/CAM technique is suited for wide application and not restricted to complex cases. Where additional fees/funds are not available, the CAD/CAM technique might be unprofitable, so the decision whether or not to use it remains a case-to-case decision with respect to cost versus benefit. PMID:25459375

  18. Computer-aided design of millimeter-wave E-plane filters

    NASA Astrophysics Data System (ADS)

    Shih, Y.-C.; Itoh, T.; Bui, L. Q.

    1983-02-01

    A computer-aided design (CAD) algorithm has been developed for a class of E-plane bandpass filters. The analysis portion of the algorithm is based on the residue-calculus technique and a generalized scattering parameter method. It is mathematically exact and numerically very efficient. Filters designed with this method have been fabricated and tested in Ka-band. Good agreement with design has been obtained.

  19. Design, fabrication, and testing of contact-aided compliant cellular mechanisms with curved walls

    NASA Astrophysics Data System (ADS)

    Cirone, Samantha A.; Hayes, Gregory R.; Babcox, Brian L.; Frecker, Mary; Adair, James H.; Lesieutre, George A.

    2011-03-01

    Contact-Aided Compliant Cellular Mechanisms (C3M) are compliant cellular structures with integrated contact mechanisms. The focus of the paper is on the design, fabrication, and testing of C3M with curved walls for high strain applications. It is shown that global strains were increased by replacing straight walls with curved walls in the traditional honeycomb structure, while the addition of contact mechanisms increased cell performance via stress relief in some cases. Furthermore, curved walls are beneficial for fabrication at the meso-scale. The basic curved honeycomb cell geometry is defined by a set of variables. These variables were optimized using Matlab and finite element analysis to find the best non-contact and contact-aided curved cell geometries as well as the cell geometry that provides the greatest stress relief. Currently, the most effective contact-aided curved honeycomb cell can withstand global strains approximately 160% greater than the most effective contact-aided, non-curved cell. Four different designs were fabricated via the Lost Mold-Rapid Infiltration Forming (LM-RIF) process. An array of the contact-aided optimized curved cell was then mechanically tested using a custom designed test rig, and the results were found to have a higher modulus of elasticity and lower global strain than the predictions. Despite these discrepancies, a high-strength highstrain cellular structure was developed, for potential use in morphing aircraft applications.

  20. Computer-aided reliability estimation. [for fault-tolerant systems

    NASA Technical Reports Server (NTRS)

    Stiffler, J. J.

    1977-01-01

    Computer-aided reliability estimation (CARE) programs are developed to improve the tools available for estimating the reliability of fault-tolerant systems. A description is presented of a program, called CARE II, which was developed after the first program reported by Mathur (1971). Attention is given to the CARE II reliability model, the CARE II coverage model, and CARE II limitations which are to be rectified in CARE III. It is pointed out that the present coverage model in CARE II is extremely versatile. The major limitation is related to the burden placed on the user to determine the basic parameters from which the coverage calculations are made.

  1. BWID System Design Study

    SciTech Connect

    O`Brien, M.C.; Rudin, M.J.; Morrison, J.L.; Richardson, J.G.

    1991-12-31

    The mission of the Buried Waste Integrated Demonstration (BWID) System Design Study is to identify and evaluate technology process options for the cradle-to-grave remediation of Transuranic (TRU)-Contaminated Waste Pits and Trenches buried at the Idaho National Engineering Laboratory (INEL). Emphasis is placed upon evaluating system configuration options and associated functional and operational requirements for retrieving and treating the buried wastes. A Performance-Based Technology Selection Filter was developed to evaluate the identified remediation systems and their enabling technologies based upon system requirements and quantification of technical Comprehensive Environmental Response, Compensation, and Liability (CERCLA) balancing criteria. Remediation systems will also be evaluated with respect to regulatory and institutional acceptance and cost-effectiveness.

  2. BWID System Design Study

    SciTech Connect

    O'Brien, M.C.; Rudin, M.J.; Morrison, J.L.; Richardson, J.G.

    1991-01-01

    The mission of the Buried Waste Integrated Demonstration (BWID) System Design Study is to identify and evaluate technology process options for the cradle-to-grave remediation of Transuranic (TRU)-Contaminated Waste Pits and Trenches buried at the Idaho National Engineering Laboratory (INEL). Emphasis is placed upon evaluating system configuration options and associated functional and operational requirements for retrieving and treating the buried wastes. A Performance-Based Technology Selection Filter was developed to evaluate the identified remediation systems and their enabling technologies based upon system requirements and quantification of technical Comprehensive Environmental Response, Compensation, and Liability (CERCLA) balancing criteria. Remediation systems will also be evaluated with respect to regulatory and institutional acceptance and cost-effectiveness.

  3. A novel integrated framework and improved methodology of computer-aided drug design.

    PubMed

    Chen, Calvin Yu-Chian

    2013-01-01

    Computer-aided drug design (CADD) is a critical initiating step of drug development, but a single model capable of covering all designing aspects remains to be elucidated. Hence, we developed a drug design modeling framework that integrates multiple approaches, including machine learning based quantitative structure-activity relationship (QSAR) analysis, 3D-QSAR, Bayesian network, pharmacophore modeling, and structure-based docking algorithm. Restrictions for each model were defined for improved individual and overall accuracy. An integration method was applied to join the results from each model to minimize bias and errors. In addition, the integrated model adopts both static and dynamic analysis to validate the intermolecular stabilities of the receptor-ligand conformation. The proposed protocol was applied to identifying HER2 inhibitors from traditional Chinese medicine (TCM) as an example for validating our new protocol. Eight potent leads were identified from six TCM sources. A joint validation system comprised of comparative molecular field analysis, comparative molecular similarity indices analysis, and molecular dynamics simulation further characterized the candidates into three potential binding conformations and validated the binding stability of each protein-ligand complex. The ligand pathway was also performed to predict the ligand "in" and "exit" from the binding site. In summary, we propose a novel systematic CADD methodology for the identification, analysis, and characterization of drug-like candidates. PMID:23651478

  4. Investigation into the development of computer aided design software for space based sensors

    NASA Technical Reports Server (NTRS)

    Pender, C. W.; Clark, W. L.

    1987-01-01

    The described effort is phase one of the development of a Computer Aided Design (CAD) software to be used to perform radiometric sensor design. The software package will be referred to as SCAD and is directed toward the preliminary phase of the design of space based sensor system. The approach being followed is to develop a modern, graphic intensive, user friendly software package using existing software as building blocks. The emphasis will be directed toward the development of a shell containing menus, smart defaults, and interfaces, which can accommodate a wide variety of existing application software packages. The shell will offer expected utilities such as graphics, tailored menus, and a variety of drivers for I/O devices. Following the development of the shell, the development of SCAD is planned as chiefly selection and integration of appropriate building blocks. The phase one development activities have included: the selection of hardware which will be used with SCAD; the determination of the scope of SCAD; the preliminary evaluation of a number of software packages for applicability to SCAD; determination of a method for achieving required capabilities where voids exist; and then establishing a strategy for binding the software modules into an easy to use tool kit.

  5. Accelerating Science Driven System Design With RAMP

    SciTech Connect

    Wawrzynek, John

    2015-05-01

    Researchers from UC Berkeley, in collaboration with the Lawrence Berkeley National Lab, are engaged in developing an Infrastructure for Synthesis with Integrated Simulation (ISIS). The ISIS Project was a cooperative effort for “application-driven hardware design” that engages application scientists in the early parts of the hardware design process for future generation supercomputing systems. This project served to foster development of computing systems that are better tuned to the application requirements of demanding scientific applications and result in more cost-effective and efficient HPC system designs. In order to overcome long conventional design-cycle times, we leveraged reconfigurable devices to aid in the design of high-efficiency systems, including conventional multi- and many-core systems. The resulting system emulation/prototyping environment, in conjunction with the appropriate intermediate abstractions, provided both a convenient user programming experience and retained flexibility, and thus efficiency, of a reconfigurable platform. We initially targeted the Berkeley RAMP system (Research Accelerator for Multiple Processors) as that hardware emulation environment to facilitate and ultimately accelerate the iterative process of science-driven system design. Our goal was to develop and demonstrate a design methodology for domain-optimized computer system architectures. The tangible outcome is a methodology and tools for rapid prototyping and design-space exploration, leading to highly optimized and efficient HPC systems.

  6. Computer-aided design drafting/manufacturing (CADD/M) facility preparation

    SciTech Connect

    Norton, F.J.

    1980-09-23

    Computer-Aided Design, Drafting and Manufacturing (CADD/M) equipment requires careful facilities preparation before installation takes place. This paper presents what a company should consider to ensure a proper installation. This includes consideration of working conditions. To get the most out of the system, the operators must be provided with a relaxed, comfortable environment, free from noise and other distractions. Such things as temperature requirements, lighting, power, security and fire protection are discussed. Also, future expansion needs are considered so that major construction will not be required for future years. Advanced planning in these areas is needed to ensure successful implementation of a CADD/M system. This will lead to considerable cost savings, and in the long run, improve the scheduling for an entire project, from initial design to final production. This careful preparation will minimize unplanned events and problem areas. These are ambitious goals but easily realized if a logical and rational plan is adopted in the same manner as that used in a typical development program.

  7. Intelligent design system for design automation

    NASA Astrophysics Data System (ADS)

    Shakeri, Cirrus; Deif, Ismail; Katragadda, Prasanna; Knutson, Stanley

    2000-10-01

    In order to succeed in today's global, competitive market, companies need continuous improvements in their product development processes. These improvements should result in expending fewer resources on the design process while achieving better quality. Automating the design process reduces resources needed and allows designers to spend more time on creative aspects that improve the quality of design. For the last three decades, engineers and designers have been searching for better ways to automate the product development process. For certain classes of design problems, which cover a large portion of real world design situations, the process can be automated using knowledge-based systems. These are design problems in which the knowledge sources are known in advance. Using techniques from Knowledge-Based Engineering, knowledge is codified and inserted into a knowledge-based system. The system activates the design knowledge, automatically generating designs that satisfy the design constraints. To increase the return on investment of building automated design systems, Knowledge management methodologies and techniques are required for capturing, formalizing, storing, and searching design knowledge.

  8. Preliminary design of a future integrated design system

    NASA Technical Reports Server (NTRS)

    Diggins, R. M.

    1980-01-01

    IPAD is a system of computer programs and data supporting the aerospace-vehicle design process by providing a set of services to aid in the management of a design project, project technical work, and project support work. Its purpose is to integrate people, programs, and data into a unified aerospace-vehicle design system. All project-management and technical data, together with certain standard data, are stored in a data base. The IPAD functions allow project personnel to query the data base and to perform operations on the data. This permits the orderly sequencing of the task elements of a complex operation and provides common access to a single data base by various participating groups who otherwise would require many separate files. These capabilities will be provided on a single host computer or across multiple heterogeneous computers on a distributed progress basis.

  9. DeMAID/GA an Enhanced Design Manager's Aid for Intelligent Decomposition

    NASA Technical Reports Server (NTRS)

    Rogers, J. L.

    1996-01-01

    Many companies are looking for new tools and techniques to aid a design manager in making decisions that can reduce the time and cost of a design cycle. One tool is the Design Manager's Aid for Intelligent Decomposition (DeMAID). Since the initial public release of DeMAID in 1989, much research has been done in the areas of decomposition, concurrent engineering, parallel processing, and process management; many new tools and techniques have emerged. Based on these recent research and development efforts, numerous enhancements have been added to DeMAID to further aid the design manager in saving both cost and time in a design cycle. The key enhancement, a genetic algorithm (GA), will be available in the next public release called DeMAID/GA. The GA sequences the design processes to minimize the cost and time in converging a solution. The major enhancements in the upgrade of DeMAID to DeMAID/GA are discussed in this paper. A sample conceptual design project is used to show how these enhancements can be applied to improve the design cycle.

  10. [Computer-aided design of polyketides with the required properties].

    PubMed

    Sergeĭko, A P; Stepanchikova, A V; Sobolev, B N; Zotchev, S B; Lagunin, A A; Filimonov, D A; Poroĭkov, V V

    2007-01-01

    We propose an approach to rational design of new polyketides with the required spectrum of biological activity. We developed BioGenPharm software for generation of polyketide combinatorial libraries, prediction of activity spectra for the generated structures and selection of molecules with the required properties on the basis of user defined input parameters and selection criteria. For prediction of polyketide activity spectra we used PASS algorithm (http://www.ibmc.msk.ru/PASS). Validation of PASS prediction ability for polyketides was performed vs. the evaluation set containing 242 natural macrolides from the Dictionary of Natural Products. The mean prediction accuracy was 75,5%. The problem of choice of cutting points for probability of the presence of activity (Pa), which provide optimal combination of such parameters as sensitivity, specificity, concordance was considered. Applicability of the described method has been illustrated by generation of a virtual library of the erythromycin analogues and selection substances for which the probability of hepatotoxic action is low. PMID:18078066

  11. Assembly and insertion of a self-fitting hearing aid: design of effective instruction materials.

    PubMed

    Caposecco, Andrea; Hickson, Louise; Meyer, Carly

    2011-12-01

    A self-fitting hearing aid has been proposed as a viable option to meet the need for rehabilitation in areas where audiology services are unreliable. A successful outcome with a self-fitting hearing aid pivots in part on the clarity of the instructions accompanying the device. The aims of this article are (a) to review the literature to determine features that should be incorporated into written health-care materials and factors to consider in the design process when developing written instructions for a target audience of older adults and (b) to apply this information to the development of a set of written instructions as the first step in self-fitting of a hearing aid, assembling four parts and inserting the aid into the ear. The method involved a literature review of published peer reviewed research. The literature revealed four steps in the development of written health-care materials: planning, design, assessment of suitability, and pilot testing. Best practice design principles for each step were applied in the development of instructions for how to assemble and insert a hearing aid. Separate booklets were developed for the left and right aids and the content of each consisted of simple line drawings accompanied by captions. The reading level was Grade 3.5 equivalent and the Flesch Reading Ease Score was 91.1 indicating that the materials were "very easy" to read. It is essential to follow best practice design principles when developing written health-care materials to motivate the reader, maximize comprehension, and increase the likelihood of successful application of the content. PMID:22389434

  12. Effects of Computer-Aided Personalized System of Instruction in Developing Knowledge and Critical Thinking in Blended Learning Courses

    ERIC Educational Resources Information Center

    Svenningsen, Louis; Pear, Joseph J.

    2011-01-01

    Two experiments were conducted to assess an online version of Keller's personalized system of instruction, called computer-aided personalized system of instruction (CAPSI), as part of a blended learning design with regard to course knowledge and critical thinking development. In Experiment 1, two lecture sections of an introduction to University…

  13. Complexity aided design. The FuturICT technological innovation paradigm

    NASA Astrophysics Data System (ADS)

    Carbone, A.; Ajmone-Marsan, M.; Axhausen, K. W.; Batty, M.; Masera, M.; Rome, E.

    2012-11-01

    "In the next century, planet earth will don an electronic skin. It will use the Internet as a scaffold to support and transmit its sensations. This skin is already being stitched together. It consists of millions of embedded electronic measuring devices: thermostats, pressure gauges, pollution detectors, cameras, microphones, glucose sensors, EKGs, electroencephalographs. These will probe and monitor cities and endangered species, the atmosphere, our ships, highways and fleets of trucks, our conversations, our bodies-even our dreams ....What will the earth's new skin permit us to feel? How will we use its surges of sensation? For several years-maybe for a decade-there will be no central nervous system to manage this vast signaling network. Certainly there will be no central intelligence...some qualities of self-awareness will emerge once the Net is sensually enhanced. Sensuality is only one force pushing the Net toward intelligence". These statements are quoted by an interview by Cherry Murray, Dean of the Harvard School of Engineering and Applied Sciences and Professor of Physics. It is interesting to outline the timeliness and highly predicting power of these statements. In particular, we would like to point to the relevance of the question "What will the earth's new skin permit us to feel?" to the work we are going to discuss in this paper. There are many additional compelling questions, as for example: "How can the electronic earth's skin be made more resilient?"; "How can the earth's electronic skin be improved to better satisfy the need of our society?";"What can the science of complex systems contribute to this endeavour?"

  14. The Brain in AIDS: Central Nervous System HIV-1 Infection and AIDS Dementia Complex.

    ERIC Educational Resources Information Center

    Price, Richard W.; And Others

    1988-01-01

    Discusses the complicated infection of human immunodeficiency virus type 1 (HIV-1) in its late stages of the acquired immune deficiency syndrome (AIDS) dementia complex. Explains the syndrome's development of abnormalities in cognition, motor performance, and behavior. (TW)

  15. Gathering Empirical Evidence Concerning Links between Computer Aided Design (CAD) and Creativity

    ERIC Educational Resources Information Center

    Musta'amal, Aede Hatib; Norman, Eddie; Hodgson, Tony

    2009-01-01

    Discussion is often reported concerning potential links between computer-aided designing and creativity, but there is a lack of systematic enquiry to gather empirical evidence concerning such links. This paper reports an indication of findings from other research studies carried out in contexts beyond general education that have sought evidence…

  16. Office of Student Financial Aid Quality Improvement Program: Design and Implementation Plan.

    ERIC Educational Resources Information Center

    Advanced Technology, Inc., Reston, VA.

    The purpose and direction of the Office of Student Financial Aid (OSFA) quality improvement program are described. The background and context for the Pell Grant quality control (QC) design study and the meaning of QC are reviewed. The general approach to quality improvement consists of the following elements: a strategic approach that enables OSFA…

  17. Therapist-Aided Exposure for Women with Lifelong Vaginismus: A Replicated Single-Case Design

    ERIC Educational Resources Information Center

    ter Kuile, Moniek M.; Bulte, Isis; Weijenborg, Philomeen T. M.; Beekman, Aart; Melles, Reinhilde; Onghena, Patrick

    2009-01-01

    Vaginismus is commonly described as a persistent difficulty in allowing vaginal entry of a penis or other object. Lifelong vaginismus occurs when a woman has never been able to have intercourse. A replicated single-case A-B-phase design was used to investigate the effectiveness of therapist-aided exposure for lifelong vaginismus. A baseline period…

  18. Web-Based Learning in the Computer-Aided Design Curriculum.

    ERIC Educational Resources Information Center

    Sung, Wen-Tsai; Ou, S. C.

    2002-01-01

    Applies principles of constructivism and virtual reality (VR) to computer-aided design (CAD) curriculum, particularly engineering, by integrating network, VR and CAD technologies into a Web-based learning environment that expands traditional two-dimensional computer graphics into a three-dimensional real-time simulation that enhances user…

  19. Improving a Student's Reading Comprehension Skills by Teaching Computer Aided Design.

    ERIC Educational Resources Information Center

    Bentivolio, Kerry

    A serendipitous observation resulted in an examination of the effectiveness of using a computer aided design course to improve high school student's strategic reading skills. Conducted in a 3 month semester period, the study relied on teacher observations, student questionnaires, and personal interviews. More than 75% of the students in the…

  20. The Design, Implementation, and Formative Evaluation of a Classroom Aide Professional Development Training Program

    ERIC Educational Resources Information Center

    Dulfer, Katherine J.

    2013-01-01

    This dissertation focused on the process of designing, implementing, and formatively evaluating an eight week Classroom Aide Professional Development Training Program (CAPD-TP) on behavior management and academic instruction within the context of a New Jersey state approved private special education school for students with behavioral and/or…

  1. National Science Foundation 1989 Engineering Senior Design Projects To Aid the Disabled.

    ERIC Educational Resources Information Center

    Enderle, John D., Ed.

    Through the Bioengineering and Research to Aid the Disabled program of the National Science Foundation, design projects were awarded competitively to 16 universities. Senior engineering students at each of the universities constructed custom devices and software for disabled individuals. This compendium contains a description of each project in…

  2. Technology and Jobs: Computer-Aided Design. Numerical-Control Machine-Tool Operators. Office Automation.

    ERIC Educational Resources Information Center

    Stanton, Michael; And Others

    1985-01-01

    Three reports on the effects of high technology on the nature of work include (1) Stanton on applications and implications of computer-aided design for engineers, drafters, and architects; (2) Nardone on the outlook and training of numerical-control machine tool operators; and (3) Austin and Drake on the future of clerical occupations in automated…

  3. Macromolecular Assemblage in the Design of a Synthetic AIDS Vaccine

    NASA Astrophysics Data System (ADS)

    Defoort, Jean-Philippe; Nardelli, Bernardetta; Huang, Wolin; Ho, David D.; Tam, James P.

    1992-05-01

    We describe a peptide vaccine model based on the mimicry of surface coat protein of a pathogen. This model used a macromolecular assemblage approach to amplify peptide antigens in liposomes or micelles. The key components of the model consisted of an oligomeric lysine scaffolding to amplify peptide antigens covalently 4-fold and a lipophilic membrane-anchoring group to further amplify noncovalently the antigens many-fold in liposomal or micellar form. A peptide antigen derived from the third variable domain of glycoprotein gp120 of human immunodeficiency virus type 1 (HIV-1), consisting of neutralizing, T-helper, and T-cytotoxic epitopes, was used in a macromolecular assemblage model (HIV-1 linear peptide amino acid sequence 308-331 in a tetravalent multiple antigen peptide system linked to tripalmitoyl-S-glycerylcysteine). The latter complex, in liposome or micelle, was used to immunize mice and guinea pigs without any adjuvant and found to induce gp120-specific antibodies that neutralize virus infectivity in vitro, elicit cytokine production, and prime CD8^+ cytotoxic T lymphocytes in vivo. Our results show that the macromolecular assemblage approach bears immunological mimicry of the gp120 of HIV virus and may lead to useful vaccines against HIV infection.

  4. Computer-Aided Design of Photocured Polymer Networks

    NASA Astrophysics Data System (ADS)

    Sarkar, Swarnavo; Lin-Gibson, Sheng; Chiang, Martin

    Light-initiated free radical polymerization is widely used for manufacturing biomaterials, scaffolds for micomolding, and is being developed as a method for fast 3D fabrication. This process has a large set of control parameters in the composition of the photocurable matrix and the photocuring conditions. But a quantitative map between the choice of parameters and the properties of the resultant polymer is currently unavailable. We present a computational approach to simulate the growth of a polymer network using the stochastic differential equations of reactions and diffusion for a photocuring system. This method allows us to sample trajectories of a growing polymer network in silico. Thus, we provide a computational alternative to synthesize and probe a polymer network for properties like the degree of conversion, structure factor, density of states, and viscosity. We present simulation results that agree with the universal features observed in photopolymerization. Our proposed method enables a thorough and systematic search over the entire parameter space to discover interesting combinations for synthesis.

  5. Computer-Aided Drug Design of Bioactive Natural Products.

    PubMed

    Prachayasittikul, Veda; Worachartcheewan, Apilak; Shoombuatong, Watshara; Songtawee, Napat; Simeon, Saw; Prachayasittikul, Virapong; Nantasenamat, Chanin

    2015-01-01

    Natural products have been an integral part of sustaining civilizations because of their medicinal properties. Past discoveries of bioactive natural products have relied on serendipity, and these compounds serve as inspiration for the generation of analogs with desired physicochemical properties. Bioactive natural products with therapeutic potential are abundantly available in nature and some of them are beyond exploration by conventional methods. The effectiveness of computational approaches as versatile tools for facilitating drug discovery and development has been recognized for decades, without exception, in the case of natural products. In the post-genomic era, scientists are bombarded with data produced by advanced technologies. Thus, rendering these data into knowledge that is interpretable and meaningful becomes an essential issue. In this regard, computational approaches utilize the existing data to generate knowledge that provides valuable understanding for addressing current problems and guiding the further research and development of new natural-derived drugs. Furthermore, several medicinal plants have been continuously used in many traditional medicine systems since antiquity throughout the world, and their mechanisms have not yet been elucidated. Therefore, the utilization of computational approaches and advanced synthetic techniques would yield great benefit to improving the world's health population and well-being. PMID:25961523

  6. Low-floor bus design preferences of walking aid users during simulated boarding and alighting.

    PubMed

    D'souza, Clive; Paquet, Victor; Lenker, James; Steinfeld, Edward; Bareria, Piyush

    2012-01-01

    Low-floor buses represent a significant improvement in accessible public transit for passengers with limited mobility. However, there is still a need for research on the inclusive design of transit buses to identify specific low-floor bus design conditions that are either particularly accommodating or challenging for passengers with functional and mobility impairments. These include doorway locations, seating configuration and the large front wheel-well covers that collectively impact boarding, alighting and interior movement of passengers. Findings from a laboratory study using a static full-scale simulation of a lowfloor bus to evaluate the impact of seating configuration and crowding on interior movement and accessibility for individuals with and without walking aids are presented (n=41). Simulated bus journeys that included boarding, fare payment, seating, and alighting were performed. Results from video observations and subjective assessments showed differences in boarding and alighting performance and users' perceptions of task difficulty. The need for assistive design features (e.g. handholds, stanchions), legroom and stowage space for walking aids was evident. These results demonstrate that specific design conditions in low-floor buses can significantly impact design preference among those who use walking aids. Consideration of ergonomics and inclusive design can therefore be used to improve the design of low-floor buses. PMID:22317485

  7. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (SGI IRIS VERSION)

    NASA Technical Reports Server (NTRS)

    Rogers, J. L.

    1994-01-01

    Many engineering systems are large and multi-disciplinary. Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed the proposed system can be decomposed to identify its hierarchical structure. DeMAID (A Design Manager's Aid for Intelligent Decomposition) is a knowledge-based system for ordering the sequence of modules and identifying a possible multilevel structure for the design problem. DeMAID displays the modules in an N x N matrix format (called a design structure matrix) where a module is any process that requires input and generates an output. (Modules which generate an output but do not require an input, such as an initialization process, are also acceptable.) Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save a considerable amount of money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined. The decomposition of a complex design system into subsystems requires the judgement of the design manager. DeMAID reorders and groups the modules based on the links (interactions) among the modules, helping the design manager make decomposition decisions early in the design cycle. The modules are grouped into circuits (the subsystems) and displayed in an N x N matrix format. Feedback links, which indicate an iterative process, are minimized and only occur within a subsystem. Since there are no feedback links among the circuits, the circuits can be displayed in a multilevel format. Thus, a large amount of information is reduced to one or two displays which are stored for later retrieval and modification. The design manager and leaders of the design teams then have a visual display of the design problem and the intricate interactions among the different modules. The design manager could save a substantial

  8. Computer-Aided Diagnostic System For Mass Survey Chest Images

    NASA Astrophysics Data System (ADS)

    Yasuda, Yoshizumi; Kinoshita, Yasuhiro; Emori, Yasufumi; Yoshimura, Hitoshi

    1988-06-01

    In order to support screening of chest radiographs on mass survey, a computer-aided diagnostic system that automatically detects abnormality of candidate images using a digital image analysis technique has been developed. Extracting boundary lines of lung fields and examining their shapes allowed various kind of abnormalities to be detected. Correction and expansion were facilitated by describing the system control, image analysis control and judgement of abnormality in the rule type programing language. In the experiments using typical samples of student's radiograms, good results were obtained for the detection of abnormal shape of lung field, cardiac hypertrophy and scoliosis. As for the detection of diaphragmatic abnormality, relatively good results were obtained but further improvements will be necessary.

  9. Advancing lighting and daylighting simulation: The transition from analysis to design aid tools

    SciTech Connect

    Hitchcock, R.J.

    1995-05-01

    This paper explores three significant software development requirements for making the transition from stand-alone lighting simulation/analysis tools to simulation-based design aid tools. These requirements include specialized lighting simulation engines, facilitated methods for creating detailed simulatable building descriptions, an automated techniques for providing lighting design guidance. Initial computer implementations meant to address each of these requirements are discussed to further elaborate these requirements and to illustrate work-in-progress.

  10. Computer-aided roll pass design in rolling of airfoil shapes

    NASA Technical Reports Server (NTRS)

    Akgerman, N.; Lahoti, G. D.; Altan, T.

    1980-01-01

    This paper describes two computer-aided design (CAD) programs developed for modeling the shape rolling process for airfoil sections. The first program, SHPROL, uses a modular upper-bound method of analysis and predicts the lateral spread, elongation, and roll torque. The second program, ROLPAS, predicts the stresses, roll separating force, the roll torque and the details of metal flow by simulating the rolling process, using the slab method of analysis. ROLPAS is an interactive program; it offers graphic display capabilities and allows the user to interact with the computer via a keyboard, CRT, and a light pen. The accuracy of the computerized models was evaluated by (a) rolling a selected airfoil shape at room temperature from 1018 steel and isothermally at high temperature from Ti-6Al-4V, and (b) comparing the experimental results with computer predictions. The comparisons indicated that the CAD systems, described here, are useful for practical engineering purposes and can be utilized in roll pass design and analysis for airfoil and similar shapes.

  11. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (SGI IRIS VERSION)

    NASA Technical Reports Server (NTRS)

    Rogers, J. L.

    1994-01-01

    Many engineering systems are large and multi-disciplinary. Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed the proposed system can be decomposed to identify its hierarchical structure. DeMAID (A Design Manager's Aid for Intelligent Decomposition) is a knowledge-based system for ordering the sequence of modules and identifying a possible multilevel structure for the design problem. DeMAID displays the modules in an N x N matrix format (called a design structure matrix) where a module is any process that requires input and generates an output. (Modules which generate an output but do not require an input, such as an initialization process, are also acceptable.) Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save a considerable amount of money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined. The decomposition of a complex design system into subsystems requires the judgement of the design manager. DeMAID reorders and groups the modules based on the links (interactions) among the modules, helping the design manager make decomposition decisions early in the design cycle. The modules are grouped into circuits (the subsystems) and displayed in an N x N matrix format. Feedback links, which indicate an iterative process, are minimized and only occur within a subsystem. Since there are no feedback links among the circuits, the circuits can be displayed in a multilevel format. Thus, a large amount of information is reduced to one or two displays which are stored for later retrieval and modification. The design manager and leaders of the design teams then have a visual display of the design problem and the intricate interactions among the different modules. The design manager could save a substantial

  12. Payload installation and deployment aid for space shuttle orbiter spacecraft remote manipulator system

    NASA Technical Reports Server (NTRS)

    Ross, T. O.

    1982-01-01

    An aid concept known as the PIDA (Payload Installation and Deployment Aid) is presented as a way to assist the Remote Manipulator System (RMS) by relaxing the accuracy required during payload handling in the payload bay. The aid concept was designed and developed to move payloads through a prescribed path between the confined quarters of the payload bay and a position outside the critical maneuvering area of the Orbiter. An androgynous docking mechanism is used at the payload/PIDA interfaces for normal docking functions that also serves as the structural connection between the payload and the Orbiter, that is capable of being loosened to prevent transfer of loads between a stowed payload and the PIDA structure. A gearmotor driven drum/cable system is used in the docking mechanism in a unique manner to center the attenuator assembly, align the ring and guide assembly (docking interface) in roll, pitch, and yaw, and rigidize the mechanism at a nominal position. A description of the design requirements and the modes of operation of the various functions of the deployment and the docking mechanisms are covered.

  13. Biomedical Informatics for Computer-Aided Decision Support Systems: A Survey

    PubMed Central

    Belle, Ashwin; Kon, Mark A.; Najarian, Kayvan

    2013-01-01

    The volumes of current patient data as well as their complexity make clinical decision making more challenging than ever for physicians and other care givers. This situation calls for the use of biomedical informatics methods to process data and form recommendations and/or predictions to assist such decision makers. The design, implementation, and use of biomedical informatics systems in the form of computer-aided decision support have become essential and widely used over the last two decades. This paper provides a brief review of such systems, their application protocols and methodologies, and the future challenges and directions they suggest. PMID:23431259

  14. A handheld computer-aided diagnosis system and simulated analysis

    NASA Astrophysics Data System (ADS)

    Su, Mingjian; Zhang, Xuejun; Liu, Brent; Su, Kening; Louie, Ryan

    2016-03-01

    This paper describes a Computer Aided Diagnosis (CAD) system based on cellphone and distributed cluster. One of the bottlenecks in building a CAD system for clinical practice is the storage and process of mass pathology samples freely among different devices, and normal pattern matching algorithm on large scale image set is very time consuming. Distributed computation on cluster has demonstrated the ability to relieve this bottleneck. We develop a system enabling the user to compare the mass image to a dataset with feature table by sending datasets to Generic Data Handler Module in Hadoop, where the pattern recognition is undertaken for the detection of skin diseases. A single and combination retrieval algorithm to data pipeline base on Map Reduce framework is used in our system in order to make optimal choice between recognition accuracy and system cost. The profile of lesion area is drawn by doctors manually on the screen, and then uploads this pattern to the server. In our evaluation experiment, an accuracy of 75% diagnosis hit rate is obtained by testing 100 patients with skin illness. Our system has the potential help in building a novel medical image dataset by collecting large amounts of gold standard during medical diagnosis. Once the project is online, the participants are free to join and eventually an abundant sample dataset will soon be gathered enough for learning. These results demonstrate our technology is very promising and expected to be used in clinical practice.

  15. Tritium glovebox stripper system seismic design evaluation

    SciTech Connect

    Grinnell, J. J.; Klein, J. E.

    2015-09-01

    The use of glovebox confinement at US Department of Energy (DOE) tritium facilities has been discussed in numerous publications. Glovebox confinement protects the workers from radioactive material (especially tritium oxide), provides an inert atmosphere for prevention of flammable gas mixtures and deflagrations, and allows recovery of tritium released from the process into the glovebox when a glovebox stripper system (GBSS) is part of the design. Tritium recovery from the glovebox atmosphere reduces emissions from the facility and the radiological dose to the public. Location of US DOE defense programs facilities away from public boundaries also aids in reducing radiological doses to the public. This is a study based upon design concepts to identify issues and considerations for design of a Seismic GBSS. Safety requirements and analysis should be considered preliminary. Safety requirements for design of GBSS should be developed and finalized as a part of the final design process.

  16. Progress of computer-aided drug design (CADD) of proteasome inhibitors.

    PubMed

    Lei, Meng; Liu, Yunde; Zhu, Yongqiang; Liu, Zhenming

    2011-12-01

    The target proteasome has been the focus of drug discovery since the first drug bortezomib was launched in 2003. Many structurally diverse proteasome inhibitors were discovered and even some of them entered the clinical trials. Due to rapid technological progress in chemistry, bioinformatics, structural biology and computer technology, computer-aided drug design (CADD) plays a more and more important role in today's drug discovery. Many CADD technologies were employed in designing various inhibitors of proteasome in the past years. This review gives a global description of the development of computer-aided proteasome inhibitor design by using different commercial or academic software. The binding modes of some structurally novel inhibitors with proteasome were visualized with these new technologies. PMID:21824106

  17. Enhancements to the Design Manager's Aide for Intelligent Decomposition (DeMaid)

    NASA Technical Reports Server (NTRS)

    Rogers, James L.; Barthelemy, Jean-Francois M.

    1992-01-01

    This paper discusses the addition of two new enhancements to the program Design Manager's Aide for Intelligent Decomposition (DeMAID). DeMAID is a knowledge-based tool used to aid a design manager in understanding the interactions among the tasks of a complex design problem. This is done by ordering the tasks to minimize feedback, determining the participating subsystems, and displaying them in an easily understood format. The two new enhancements include (1) rules for ordering a complex assembly process and (2) rules for determining which analysis tasks must be re-executed to compute the output of one task based on a change in input to that or another task.

  18. Enhancements to the Design Manager's Aide for Intelligent Decomposition (DeMAID)

    NASA Technical Reports Server (NTRS)

    Rogers, James L.; Barthelemy, Jean-Francois M.

    1992-01-01

    This paper discusses the addition of two new enhancements to the program Design Manager's Aide for Intelligent Decomposition (DeMAID). DeMAID is a knowledge-based tool used to aid a design manager in understanding the interactions among the tasks of a complex design problem. This is done by ordering the tasks to minimize feedback, determining the participating subsystems, and displaying them in an easily understood format. The two new enhancements include (1) rules for ordering a complex assembly process and (2) rules for determining which analysis tasks must be re-executed to compute the output of one task based on a change in input to that or another task.

  19. Design Language for Digital Systems

    NASA Technical Reports Server (NTRS)

    Shiva, S. G.

    1985-01-01

    Digital Systems Design Language (DDL) is convenient hardware description language for developing and testing digital designs and for inputting design details into design automation system. Describes digital systems at gate, register transfer, and combinational block levels. DDL-based programs written in FORTRAN IV for batch execution.

  20. Computer-aided alignment of off-axis three-mirror imaging spectrometer system

    NASA Astrophysics Data System (ADS)

    Gong, Dun; Wang, Hong; Tian, Tie-yin

    2013-08-01

    The space camera is one of the most advanced optical equipments in obtaining earth surface information from space. With the development of the optical design, manufacture and alignment technology, the performance of the optical camera is moving forward quickly. In spaceto- ground remote sensing field, the resolution of ground remote sensing images have become higher and higher. Off-axis three-mirror system becomes an advanced optical system structure of space camera at present , because of its merits of large field, long focal length, no obstruction, high modulated transfer function, wide spectrum, good image quality, small cubage and light weight, etc. As it is difficult to align and test, the alignment of off-axis three mirror system is timeconsuming, so it is important and necessary of studying the computer-aided alignment of the complex optical system. Aiming at cutting the time of alignment, Computer-aided alignment technology is applied to this system. According to relation between fringe Zernike coefficient and Seidel aberration, wavefront aberration in the exit pupil of optical system is instead with fringe Zernike coefficient. A series of Zernike coefficient expressing the incorrect parameters of system are obtained by using multi-fields ZYGO interferometer auto-collimating interference test, which are transformed into geometric aberrations as the corrected object. Incorrect parameters of the system are determined by sensitivity matrix resulted from optical design software. These incorrect parameters are defined to be variables; the Zernike coefficient are defined to be the optimized target in merit function. The system is optimized by applying optical design software to receive the incorrect parameters result. Consequently, the adjusted result is brought into the optical design software to verify the right selection of incorrect parameters. The practical experiments are also given, result with RMS value lower than 0.04λ is acquired by using this

  1. Computer-aided diagnosis system for lung tumors

    NASA Astrophysics Data System (ADS)

    Suzuki, Hideo; Inaoka, Noriko; Takabatake, Hirotsugu; Mori, Masaki; Natori, Hiroshi

    1996-04-01

    This paper describes a computerized system of tumor detection for lung cancer diagnosis. Through the ten years study, we developed some key algorithms for computer-aided diagnosis. The most important algorithm is a filter to detect suspicious shadows of tumor on a plain chest x-ray image. The filter is named directional contrast filter for nodule (DCF-N). The DCF-N is highly sensitive to ambiguous shadows such as malignant tumors. And we developed a rule- based system to eliminate false-positive shadows. In our study, the system was effective to eliminate shadows of blood vessels and ribs which were primary groups of false-positives. Our current research is focusing on the development of the automatic tumor detection system for lung cancer examination by using CT images. In this paper, we discuss whether the system for plain chest x-ray images can apply to spiral CT images within a malignant tumor, which are reconstructed at 2 mm or 5 mm slice thickness. About a trial case, although the DCF-N can detect the malignant tumor, some false-positives are also detected. As to the analysis of the shadows, which are detected by the DCF-N, the major false-positives are blood vessels shadows. Therefore, the rule to eliminate blood vessels shadows in the rule-base for plain x- ray images is also effective for the CT images.

  2. A Computer-Aided Detection System for Digital Chest Radiographs.

    PubMed

    Carrillo-de-Gea, Juan Manuel; García-Mateos, Ginés; Fernández-Alemán, José Luis; Hernández-Hernández, José Luis

    2016-01-01

    Computer-aided detection systems aim at the automatic detection of diseases using different medical imaging modalities. In this paper, a novel approach to detecting normality/pathology in digital chest radiographs is proposed. The problem tackled is complicated since it is not focused on particular diseases but anything that differs from what is considered as normality. First, the areas of interest of the chest are found using template matching on the images. Then, a texture descriptor called local binary patterns (LBP) is computed for those areas. After that, LBP histograms are applied in a classifier algorithm, which produces the final normality/pathology decision. Our experimental results show the feasibility of the proposal, with success rates above 87% in the best cases. Moreover, our technique is able to locate the possible areas of pathology in nonnormal radiographs. Strengths and limitations of the proposed approach are described in the Conclusions. PMID:27372536

  3. The design of an automated verification of redundant systems

    NASA Technical Reports Server (NTRS)

    Ford, F. A.; Hasslinger, T. W.; Moreno, F. J.

    1972-01-01

    Handbook describes design processes, presents design considerations and techniques, gives tutorial material on implementation and methodology, shows design aids, illustrates use of design aids and application samples, and identifies general practices to be adhered to or avoided.

  4. A method of computer aided design with self-generative models in NX Siemens environment

    NASA Astrophysics Data System (ADS)

    Grabowik, C.; Kalinowski, K.; Kempa, W.; Paprocka, I.

    2015-11-01

    Currently in CAD/CAE/CAM systems it is possible to create 3D design virtual models which are able to capture certain amount of knowledge. These models are especially useful in an automation of routine design tasks. These models are known as self-generative or auto generative and they can behave in an intelligent way. The main difference between the auto generative and fully parametric models consists in the auto generative models ability to self-organizing. In this case design model self-organizing means that aside from the possibility of making of automatic changes of model quantitative features these models possess knowledge how these changes should be made. Moreover they are able to change quality features according to specific knowledge. In spite of undoubted good points of self-generative models they are not so often used in design constructional process which is mainly caused by usually great complexity of these models. This complexity makes the process of self-generative time and labour consuming. It also needs a quite great investment outlays. The creation process of self-generative model consists of the three stages it is knowledge and information acquisition, model type selection and model implementation. In this paper methods of the computer aided design with self-generative models in NX Siemens CAD/CAE/CAM software are presented. There are the five methods of self-generative models preparation in NX with: parametric relations model, part families, GRIP language application, knowledge fusion and OPEN API mechanism. In the paper examples of each type of the self-generative model are presented. These methods make the constructional design process much faster. It is suggested to prepare this kind of self-generative models when there is a need of design variants creation. The conducted research on assessing the usefulness of elaborated models showed that they are highly recommended in case of routine tasks automation. But it is still difficult to distinguish

  5. Computer aided analysis and optimization of mechanical system dynamics

    NASA Technical Reports Server (NTRS)

    Haug, E. J.

    1984-01-01

    The purpose is to outline a computational approach to spatial dynamics of mechanical systems that substantially enlarges the scope of consideration to include flexible bodies, feedback control, hydraulics, and related interdisciplinary effects. Design sensitivity analysis and optimization is the ultimate goal. The approach to computer generation and solution of the system dynamic equations and graphical methods for creating animations as output is outlined.

  6. Web-Based Computer-Aided Personalized System of Instruction

    ERIC Educational Resources Information Center

    Pear, Joseph J.; Schnerch, Gabriel J.; Silva, Kathleen M.; Svenningsen, Louis; Lambert, Jody

    2011-01-01

    In the last two decades, there has been a proliferation of Web-based course-management systems designed to facilitate postsecondary teaching (for example, WebCT, Blackboard, Desire2Learn, Moodle). In general, these systems provide analogs for delivering lectures, holding class discussions, giving quizzes and examinations (typically multiple…

  7. Computer-aided optimization of grid design for high-power lead-acid batteries

    NASA Astrophysics Data System (ADS)

    Yamada, Keizo; Maeda, Ken-ichi; Sasaki, Kazuya; Hirasawa, Tokiyoshi

    Several high-power lead-acid batteries have been developed for automotive applications. A computer-aided optimization (CAO) technique has been used to obtain a low-resistance grid design. Unlike conventional computer simulation, the CAO technique does not require an unduly large number of designs to yield a good result. After introducing a pair of differential equations that are expected to be valid for the optimized design, the grid thickness is optimized by solving the boundary value problem of coupled differential equations. When applied for the grids of JIS B-size batteries, this technique reduces the potential drop of electrical resistance in a electrode by 11-14%.

  8. Computer-Aided Designed, 3-Dimensionally Printed Porous Tissue Bioscaffolds For Craniofacial Soft Tissue Reconstruction

    PubMed Central

    Zopf, David A.; Mitsak, Anna G.; Flanagan, Colleen L.; Wheeler, Matthew; Green, Glenn E.; Hollister, Scott J.

    2016-01-01

    Objectives To determine the potential of integrated image-based Computer Aided Design (CAD) and 3D printing approach to engineer scaffolds for head and neck cartilaginous reconstruction for auricular and nasal reconstruction. Study Design Proof of concept revealing novel methods for bioscaffold production with in vitro and in vivo animal data. Setting Multidisciplinary effort encompassing two academic institutions. Subjects and Methods DICOM CT images are segmented and utilized in image-based computer aided design to create porous, anatomic structures. Bioresorbable, polycaprolactone scaffolds with spherical and random porous architecture are produced using a laser-based 3D printing process. Subcutaneous in vivo implantation of auricular and nasal scaffolds was performed in a porcine model. Auricular scaffolds were seeded with chondrogenic growth factors in a hyaluronic acid/collagen hydrogel and cultured in vitro over 2 months duration. Results Auricular and nasal constructs with several microporous architectures were rapidly manufactured with high fidelity to human patient anatomy. Subcutaneous in vivo implantation of auricular and nasal scaffolds resulted in excellent appearance and complete soft tissue ingrowth. Histologic analysis of in vitro scaffolds demonstrated native appearing cartilaginous growth respecting the boundaries of the scaffold. Conclusions Integrated image-based computer-aided design (CAD) and 3D printing processes generated patient-specific nasal and auricular scaffolds that supported cartilage regeneration. PMID:25281749

  9. System design description cone penetrometer system

    SciTech Connect

    Seda, R.Y., Westinghouse Hanford

    1996-08-12

    The system design description documents in detail the design of the cone penetrometer system. The systems includes the cone penetrometer physical package, raman spectroscopy package and moisture sensor package. Information pertinent to the system design, development, fabrication and testing is provided.

  10. Interactive systems design and synthesis of future spacecraft concepts

    NASA Technical Reports Server (NTRS)

    Wright, R. L.; Deryder, D. D.; Ferebee, M. J., Jr.

    1984-01-01

    An interactive systems design and synthesis is performed on future spacecraft concepts using the Interactive Design and Evaluation of Advanced spacecraft (IDEAS) computer-aided design and analysis system. The capabilities and advantages of the systems-oriented interactive computer-aided design and analysis system are described. The synthesis of both large antenna and space station concepts, and space station evolutionary growth is demonstrated. The IDEAS program provides the user with both an interactive graphics and an interactive computing capability which consists of over 40 multidisciplinary synthesis and analysis modules. Thus, the user can create, analyze and conduct parametric studies and modify Earth-orbiting spacecraft designs (space stations, large antennas or platforms, and technologically advanced spacecraft) at an interactive terminal with relative ease. The IDEAS approach is useful during the conceptual design phase of advanced space missions when a multiplicity of parameters and concepts must be analyzed and evaluated in a cost-effective and timely manner.

  11. Two Adults with Multiple Disabilities Use a Computer-Aided Telephone System to Make Phone Calls Independently

    ERIC Educational Resources Information Center

    Lancioni, Giulio E.; O'Reilly, Mark F.; Singh, Nirbhay N.; Sigafoos, Jeff; Oliva, Doretta; Alberti, Gloria; Lang, Russell

    2011-01-01

    This study extended the assessment of a newly developed computer-aided telephone system with two participants (adults) who presented with blindness or severe visual impairment and motor or motor and intellectual disabilities. For each participant, the study was carried out according to an ABAB design, in which the A represented baseline phases and…

  12. The national- and international-wide prospects of future improvements of position location and time synchronization systems and aids

    NASA Technical Reports Server (NTRS)

    Gouzhva, Yuri G.; Balyasnikov, Boris N.; Korniyenko, Vladimir V.; Pushkina, Irina G.; Shebshayevich, Valentin S.; Denisov, Vladimir I.; Reutov, Alexander P.

    1990-01-01

    The concept being designed by the Leningrad Scientific Research Radio Technical Institute (LSRRI) of united positioning and timing service on the basis of the utilization of long-range and global radionavigation and common time systems and aids for different users is described. The estimate of its utilization on the national as well as on international scale is given.

  13. A Computer-Aided Telephone System to Enable Five Persons with Alzheimer's Disease to Make Phone Calls Independently

    ERIC Educational Resources Information Center

    Perilli, Viviana; Lancioni, Giulio E.; Laporta, Dominga; Paparella, Adele; Caffo, Alessandro O.; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Oliva, Doretta

    2013-01-01

    This study extended the assessment of a computer-aided telephone system to enable five patients with a diagnosis of Alzheimer's disease to make phone calls independently. The patients were divided into two groups and exposed to intervention according to a non-concurrent multiple baseline design across groups. All patients started with baseline in…

  14. [Numerical finite element modeling of custom car seat using computer aided design].

    PubMed

    Huang, Xuqi; Singare, Sekou

    2014-02-01

    A good cushion can not only provide the sitter with a high comfort, but also control the distribution of the hip pressure to reduce the incidence of diseases. The purpose of this study is to introduce a computer-aided design (CAD) modeling method of the buttocks-cushion using numerical finite element (FE) simulation to predict the pressure distribution on the buttocks-cushion interface. The buttock and the cushion model geometrics were acquired from a laser scanner, and the CAD software was used to create the solid model. The FE model of a true seated individual was developed using ANSYS software (ANSYS Inc, Canonsburg, PA). The model is divided into two parts, i.e. the cushion model made of foam and the buttock model represented by the pelvis covered with a soft tissue layer. Loading simulations consisted of imposing a vertical force of 520N on the pelvis, corresponding to the weight of the user upper extremity, and then solving iteratively the system. PMID:24804486

  15. Satellite-aided land mobile communications system implementation considerations

    NASA Technical Reports Server (NTRS)

    Leroy, B. E.

    1982-01-01

    It was proposed that a satellite-based land mobile radio system could effectively extend the terrestrial cellular mobile system into rural and remote areas. The market, technical and economic feasibility for such a system is studied. Some of the aspects of implementing an operational mobile-satellite system are discussed. In particular, two key factors in implementation are examined: (1) bandwidth requirements; and (2) frequency sharing. Bandwidth requirements are derived based on the satellite antenna requirements, modulation characteristics and numbers of subscribers. Design trade-offs for the satellite system and potential implementation scenarios are identified. Frequency sharing is examined from a power flux density and modulation viewpoint.

  16. Aiding the environment: the Australian Development Agency's experience of implementing an environmental management system

    SciTech Connect

    Keen, Meg . E-mail: meg.keen@anu.edu.au; Sullivan, Marjorie

    2005-08-15

    Aid agencies, like commercial businesses, are increasingly concerned with incorporating sound environmental management into their operations. Different approaches are being used to integrate sustainability into development assistance to ensure that environmental impacts are assessed and managed. One approach being used by AusAID, the Australian aid agency, is to implement an environmental management system (EMS) across program and project areas. This paper examines how AusAID has adapted the EMS approach to suit aid agency operations, and some of the lessons from the Australian experience.

  17. Computer-Aided Design/Manufacturing (CAD/M) for high-speed interconnect

    NASA Astrophysics Data System (ADS)

    Santoski, N. F.

    1981-10-01

    The objective of the Computer-Aided Design/Manufacturing (CAD/M) for High-Speed Interconnect Program study was to assess techniques for design, analysis and fabrication of interconnect structures between high-speed logic ICs that are clocked in the 200 MHz to 5 GHz range. Interconnect structure models were investigated and integrated with existing device models. Design rules for interconnects were developed in terms of parameters that can be installed in software that is used for the design, analysis and fabrication of circuits. To implement these design rules in future software development, algorithms and software development techniques were defined. Major emphasis was on Printed Wiring Board and hybrid level circuits as opposed to monolithic chips. Various packaging schemes were considered, including controlled impedance lines in the 50 to 200 ohms range where needed. The design rules developed are generic in nature, in that various architecture classes and device technologies were considered.

  18. Mandibular Reconstruction Using a Custom-Made Titanium Prosthesis: A Case Report on the Use of Virtual Surgical Planning and Computer-Aided Design/Computer-Aided Manufacturing.

    PubMed

    Ow, Andrew; Tan, Winston; Pienkowski, Lukasz

    2016-09-01

    The use of virtual surgical planning and computer-aided design/computer-aided manufacturing has been reported to enhance the planning for the reconstruction of mandibular continuity defects. This case report illustrates the use of this technology in the fabrication of a custom-made titanium prosthesis to restore a segmental mandibular defect. The design specifications and sequence of the custom-made titanium prosthesis are discussed. Although successful in this case, there are limitations in its application and case selection is of vital importance. PMID:27516841

  19. Computer-aided design and drafting visualization of anatomical structure of the human eye and orbit

    NASA Astrophysics Data System (ADS)

    Parshall, Robert F.; Sadler, Lewis L.

    1991-04-01

    A generalized " anatomically standard" eyeball was geometrically modeled on a Computer-Aided Design and Drafting (CADD) workstation based on published conceptual norms of dimension radii of curvature alignments etc. An orbital environment for this model was concurrently prepared by serial section reconstruction of a cadaver specimen. Issues addressed include orienting unregistered sections the utility of interactive CADDsupported visual logic in interpretive decision making and the value of geometric models.

  20. Tools to aid the specification and design of flight software, appendix B

    NASA Technical Reports Server (NTRS)

    Bristow, G.

    1980-01-01

    The tasks that are normally performed during the specification and architecture design stages of software development are identified. Ways that tools could perform, or aid the performance, of such tasks are also identified. Much of the verification and analysis that is suggested is currently rarely performed during these early stages, but it is believed that this analysis should be done as early as possible so as to detect errors as early as possible.

  1. Improving Aid Effectiveness or Transforming the Global Capitalist System

    ERIC Educational Resources Information Center

    Ginsburg, Mark

    2010-01-01

    In the introduction to his article, "Aid, Development, and Education," Klees (2010) poses the question, has the "hundreds of billions of dollars in international aid... loaned to [or otherwise targeted to "assist"] developing countries through bilateral and multilateral mechanisms... helped?" He then posits the question to be "too complicated to…

  2. Assessment of Alternative Student Aid Delivery Systems: Preliminary Specification of the Current System with Program Antecedents.

    ERIC Educational Resources Information Center

    Advanced Technology, Inc., Reston, VA.

    Specifications of the current delivery systems of the Pell Grant program, the Guaranteed Student Loan (GSL) program, and campus-based aid programs are provided. The relationship between features of the programs and delivery systems is also examined. The campus-based programs include the Supplemental Educational Opportunity Grant (SEOG) Program,…

  3. The Holistic Application of High Technology for Conversation, Writing, and Computer Access Aid Systems.

    ERIC Educational Resources Information Center

    Rodgers, Barry L.

    The principal thesis of this paper is that successful use of high technology for conversation, writing, and computer access aid systems requires a holistic perspective. A holistic approach is one in which all the components of the support system needed to use high technology effectively are in place. Recognizing that aid systems are tools helps…

  4. Enveloped viruses understood via multiscale simulation: computer-aided vaccine design

    NASA Astrophysics Data System (ADS)

    Shreif, Z.; Adhangale, P.; Cheluvaraja, S.; Perera, R.; Kuhn, R.; Ortoleva, P.

    Enveloped viruses are viewed as an opportunity to understand how highly organized and functional biosystems can emerge from a collection of millions of chaotically moving atoms. They are an intermediate level of complexity between macromolecules and bacteria. They are a natural system for testing theories of self-assembly and structural transitions, and for demonstrating the derivation of principles of microbiology from laws of molecular physics. As some constitute threats to human health, a computer-aided vaccine and drug design strategy that would follow from a quantitative model would be an important contribution. However, current molecular dynamics simulation approaches are not practical for modeling such systems. Our multiscale approach simultaneously accounts for the outer protein net and inner protein/genomic core, and their less structured membranous material and host fluid. It follows from a rigorous multiscale deductive analysis of laws of molecular physics. Two types of order parameters are introduced: (1) those for structures wherein constituent molecules retain long-lived connectivity (they specify the nanoscale structure as a deformation from a reference configuration) and (2) those for which there is no connectivity but organization is maintained on the average (they are field variables such as mass density or measures of preferred orientation). Rigorous multiscale techniques are used to derive equations for the order parameters dynamics. The equations account for thermal-average forces, diffusion coefficients, and effects of random forces. Statistical properties of the atomic-scale fluctuations and the order parameters are co-evolved. By combining rigorous multiscale techniques and modern supercomputing, systems of extreme complexity can be modeled.

  5. Enveloped viruses understood via multiscale simulation: computer-aided vaccine design

    NASA Astrophysics Data System (ADS)

    Shreif, Z.; Adhangale, P.; Cheluvaraja, S.; Perera, R.; Kuhn, R.; Ortoleva, P.

    2008-04-01

    Enveloped viruses are viewed as an opportunity to understand how highly organized and functional biosystems can emerge from a collection of millions of chaotically moving atoms. They are an intermediate level of complexity between macromolecules and bacteria. They are a natural system for testing theories of self-assembly and structural transitions, and for demonstrating the derivation of principles of microbiology from laws of molecular physics. As some constitute threats to human health, a computer-aided vaccine and drug design strategy that would follow from a quantitative model would be an important contribution. However, current molecular dynamics simulation approaches are not practical for modeling such systems. Our multiscale approach simultaneously accounts for the outer protein net and inner protein/genomic core, and their less structured membranous material and host fluid. It follows from a rigorous multiscale deductive analysis of laws of molecular physics. Two types of order parameters are introduced: (1) those for structures wherein constituent molecules retain long-lived connectivity (they specify the nanoscale structure as a deformation from a reference configuration) and (2) those for which there is no connectivity but organization is maintained on the average (they are field variables such as mass density or measures of preferred orientation). Rigorous multiscale techniques are used to derive equations for the order parameters dynamics. The equations account for thermal-average forces, diffusion coefficients, and effects of random forces. Statistical properties of the atomic-scale fluctuations and the order parameters are co-evolved. By combining rigorous multiscale techniques and modern supercomputing, systems of extreme complexity can be modeled.

  6. Vision-aided inertial navigation system for robotic mobile mapping

    NASA Astrophysics Data System (ADS)

    Bayoud, Fadi; Skaloud, Jan

    2008-04-01

    A mapping system by vision-aided inertial navigation was developed for areas where GNSS signals are unreachable. In this framework, a methodology on the integration of vision and inertial sensors is presented, analysed and tested. The system employs the method of “SLAM: Simultaneous Localisation And Mapping” where the only external input available to the system at the beginning of the mapping mission is a number of features with known coordinates. SLAM is a term used in the robotics community to describe the problem of mapping the environment and at the same time using this map to determine the location of the mapping device. Differing from the robotics approach, the presented development stems from the frameworks of photogrammetry and kinematic geodesy that are merged in two filters that run in parallel: the Least-Squares Adjustment (LSA) for features coordinates determination and the Kalman filter (KF) for navigation correction. To test this approach, a mapping system-prototype comprising two CCD cameras and one Inertial Measurement Unit (IMU) is introduced. Conceptually, the outputs of the LSA photogrammetric resection are used as the external measurements for the KF that corrects the inertial navigation. The filtered position and orientation are subsequently employed in the photogrammetric intersection to map the surrounding features that are used as control points for the resection in the next epoch. We confirm empirically the dependency of navigation performance on the quality of the images and the number of tracked features, as well as on the geometry of the stereo-pair. Due to its autonomous nature, the SLAM's performance is further affected by the quality of IMU initialisation and the a-priory assumptions on error distribution. Using the example of the presented system we show that centimetre accuracy can be achieved in both navigation and mapping when the image geometry is optimal.

  7. Genalogical approaches to ethical implications of informational assimilative integrated discovery systems (AIDS) in business

    SciTech Connect

    Pharhizgar, K.D.; Lunce, S.E.

    1994-12-31

    Development of knowledge-based technological acquisition techniques and customers` information profiles are known as assimilative integrated discovery systems (AIDS) in modern organizations. These systems have access through processing to both deep and broad domains of information in modern societies. Through these systems organizations and individuals can predict future trend probabilities and events concerning their customers. AIDSs are new techniques which produce new information which informants can use without the help of the knowledge sources because of the existence of highly sophisticated computerized networks. This paper has analyzed the danger and side effects of misuse of information through the illegal, unethical and immoral access to the data-base in an integrated and assimilative information system as described above. Cognivistic mapping, pragmatistic informational design gathering, and holistic classifiable and distributive techniques are potentially abusive systems whose outputs can be easily misused by businesses when researching the firm`s customers.

  8. Astrocyte scar formation aids central nervous system axon regeneration.

    PubMed

    Anderson, Mark A; Burda, Joshua E; Ren, Yilong; Ao, Yan; O'Shea, Timothy M; Kawaguchi, Riki; Coppola, Giovanni; Khakh, Baljit S; Deming, Timothy J; Sofroniew, Michael V

    2016-04-14

    Transected axons fail to regrow in the mature central nervous system. Astrocytic scars are widely regarded as causal in this failure. Here, using three genetically targeted loss-of-function manipulations in adult mice, we show that preventing astrocyte scar formation, attenuating scar-forming astrocytes, or ablating chronic astrocytic scars all failed to result in spontaneous regrowth of transected corticospinal, sensory or serotonergic axons through severe spinal cord injury (SCI) lesions. By contrast, sustained local delivery via hydrogel depots of required axon-specific growth factors not present in SCI lesions, plus growth-activating priming injuries, stimulated robust, laminin-dependent sensory axon regrowth past scar-forming astrocytes and inhibitory molecules in SCI lesions. Preventing astrocytic scar formation significantly reduced this stimulated axon regrowth. RNA sequencing revealed that astrocytes and non-astrocyte cells in SCI lesions express multiple axon-growth-supporting molecules. Our findings show that contrary to the prevailing dogma, astrocyte scar formation aids rather than prevents central nervous system axon regeneration. PMID:27027288

  9. CAMRAD - COMPUTER AIDED MATERIAL REVIEW AUTOMATED DISPOSITION SYSTEM

    NASA Technical Reports Server (NTRS)

    Hanna, T. L.

    1994-01-01

    The basic function of a manufacturer's production support engineering unit is to identify, document, and dispose of hardware that does not conform to drawing requirements. CAMRAD, a program designed for rapid input and retrieval of all data used in engineering-to-manufacturing support operations, aids the engineer by automating the material review disposition process. Before CAMRAD, material review record searches were manual. The time spent searching through old documents precluded the timely disposition of new material reviews. CAMRAD facilitates the research of material review histories and provides for the efficient processing of material review documents. Three SmartWare project files control the operation of CAMRAD. The project file CAMRAD initializes variables for the other project files and specifies the pathing of the CAMRAD program, database files, and document files. The project file DATARAD controls all data management functions. The database consists of individual files containing all records of specific hardware discrepancies for a given part number. There are four basic avenues for records searches: part serial number, feature, Material Review (MR) number, and non-conformance. WORDRAD is the project file which controls the management of document files created when processing a material review disposition. Given a material review report identifying a defective hardware item, the production support engineer can use CAMRAD to quickly search the database for any history of the same problem, find out how well the problem has been documented, and create appropriate documentation for this latest occurrence. CAMRAD is written in the Smart Programming Language and is designed to run on IBM PC compatibles with the SmartWare v. 3.1 software package available from Informix Software. CAMRAD was developed in 1987. SmartWare is a registered trademark of Informix Software, Inc. IBM PC is a registered trademark of International Business Machines Corporation.

  10. Computer-aided ergonomics: a case study of incorporating ergonomics analyses into workplace design.

    PubMed

    Feyen, R; Liu, Y; Chaffin, D; Jimmerson, G; Joseph, B

    2000-06-01

    One of the primary goals of computer-aided ergonomics is to develop software tools that allow ergonomics information to be accessed at the earliest stages of design. This case study discusses a PC-based software program that allows a designer to quantify a worker's biomechanical risk for injury based on a proposed workplace design. The program couples an established software tool for biomechanical analysis, the Three-Dimensional Static Strength Prediction Program (3DSSPP), with a widely used computer-aided design software package, AutoCAD. The use of this "3DSSPP/AutoCAD interface" in the proactive analysis of an automotive assembly task is described and the results compared with an independent assessment using observations of workers performing the same task. Both studies yield similar conclusions, suggesting that proactive use of software such as the 3DSSPP/AutoCAD interface may be a valid tool in evaluating proposed workplace designs. In this context, issues in the analysis of workplace designs regarding the use of supporting ergonomic tools, assumptions, and posture selection are discussed. PMID:10855452

  11. Design and Focus Test of a Preconsultation Decision Aid for Breast Cancer Reconstruction Patients: A Quality Improvement Initiative

    PubMed Central

    Hui, Kenneth J.; Liu, Xiang X.; Luan, Anna

    2015-01-01

    Objective: To design, develop, and evaluate via focus group a preconsultation decision aid to improve patient satisfaction for breast reconstruction. Methods: The design of the decision aid was based on perceived patient needs, literature, existing decision aids, and current standard of breast cancer reconstruction treatment and consultation at Stanford. Our decision aid was designed to (1) reducing fear of the unknown in patients via providing a knowledge base that they can rely on, (2) helping patients identify their key breast reconstruction concerns, (3) addressing common patient concerns, (4) providing a framework to help patients identify the treatment option that may be right for them, and (5) promoting shared decision making. Physicians were consulted on the decision aid, following which a focus group was conducted for patient feedback. Results: Interviewed patients (n = 12) were supportive of the decision aid initiative. Participants were especially pleased with the side-by-side comparison of surgical options and the parsimonious way information was represented. All patients before undergoing reconstruction (n = 3) requested the decision guide to reference at home. All interviewed patients believed information level was “about right.” Conclusions: Decision aid was well received by patients in the focus group. As the initiative is for quality improvement, we saw no need to further delay the distribution of the decision aid. A pilot study will be conducted to evaluate whether our decision aid has an effect on patients’ decision regret, stress, and anxiety. PMID:26171096

  12. Satellite-aided mobile radio concepts study: Concept definition of a satellite-aided mobile and personal radio communication system

    NASA Technical Reports Server (NTRS)

    Anderson, R. E.

    1979-01-01

    The satellite system requires the use of a large satellite antenna and spacecraft array power of about 12 kW or more depending on the operating frequency. Technology developments needed include large offset reflector multibeam antennas, satellite electrical power sybsystems providing greater than 12 kW of power, signal switching hardware, and linearized efficient solid state amplifiers for the satellite-aided mobile band. Presently there is no frequency assignment for this service, and it is recommended that an allocation be pursued. The satellite system appears to be within reasonable extrapolation of the state of the art. It is further recommended that the satellite-aided system spacecraft definition studies and supporting technology development be initiated.

  13. Design model of computerized personal decision aid for youth: An expert review

    NASA Astrophysics Data System (ADS)

    Sarif, Siti Mahfuzah; Ibrahim, Norfiza; Shiratuddin, Norshuhada

    2016-08-01

    This paper provides a structured review of a design model of a computerized personal decision aid that is intended for youth, named as YouthPDA Design Model. The proposed design model was examined by experts in related areas to ensure the appropriateness of the proposed components and elements, relevancy of the terminologies used, logic of the flow, usability, and practicality of the design model towards development of YouthPDA application. Seven experts from related areas were involved in the evaluation. Discussions on the findings obtained from the expert review are included in this paper. Finally, a revised design model of YouthPDA is proposed as main guidance to develop YouthPDA application.

  14. Design of the ILC Crab Cavity System

    SciTech Connect

    Adolphsen, C.; Beard, C.; Bellantoni, L.; Burt, G.; Carter, R.; Chase, B.; Church, M.; Dexter, A.; Dykes, M.; Edwards, H.; Goudket, P; Jenkins, R.; Jones, R.M.; Kalinin, A.; Khabiboulline, T.; Ko, K.; Latina, A.; Li, Z.; Ma, L.; McIntosh, P.; Ng, C.; /SLAC /Daresbury /Fermilab /Cockcroft Inst. Accel. Sci. Tech. /CERN

    2007-08-15

    The International Linear Collider (ILC) has a 14 mrad crossing angle in order to aid extraction of spent bunches. As a result of the bunch shape at the interaction point, this crossing angle at the collision causes a large luminosity loss which can be recovered by rotating the bunches prior to collision using a crab cavity. The ILC baseline crab cavity is a 9-cell superconducting dipole cavity operating at a frequency of 3.9 GHz. In this paper the design of the ILC crab cavity and its phase control system, as selected for the RDR in February 2007 is described in fuller detail.

  15. Computer-aided design of large-scale integrated circuits - A concept

    NASA Technical Reports Server (NTRS)

    Schansman, T. T.

    1971-01-01

    Circuit design and mask development sequence are improved by using general purpose computer with interactive graphics capability establishing efficient two way communications link between design engineer and system. Interactive graphics capability places design engineer in direct control of circuit development.

  16. Metalloporphyrin catalysts for oxygen reduction developed using computer-aided molecular design

    SciTech Connect

    Ryba, G.N.; Hobbs, J.D.; Shelnutt, J.A.

    1996-04-01

    The objective of this project is the development of a new class of metalloporphyrin materials used as catalsyts for use in fuel cell applications. The metalloporphyrins are excellent candidates for use as catalysts at both the anode and cathode. The catalysts reduce oxygen in 1 M potassium hydroxide, as well as in 2 M sulfuric acid. Covalent attachment to carbon supports is being investigated. The computer-aided molecular design is an iterative process, in which experimental results feed back into the design of future catalysts.

  17. A Hypermedia Computer-Aided Parasitology Tutoring System.

    ERIC Educational Resources Information Center

    Theodoropoulos, Georgios; Loumos, Vassili

    A hypermedia tutoring system for teaching parasitology to college students was developed using an object oriented software development tool, Knowledge Pro. The program was designed to meet four objectives: knowledge incorporation, tutoring, indexing of key words for Boolean search, and random generation of quiz questions with instant scoring. The…

  18. Eye-Tracking Measures Reveal How Changes in the Design of Aided AAC Displays Influence the Efficiency of Locating Symbols by School-Age Children without Disabilities

    ERIC Educational Resources Information Center

    Wilkinson, Krista M.; O'Neill, Tara; McIlvane, William J.

    2014-01-01

    Purpose: Many individuals with communication impairments use aided augmentative and alternative communication (AAC) systems involving letters, words, or line drawings that rely on the visual modality. It seems reasonable to suggest that display design should incorporate information about how users attend to and process visual information. The…

  19. Automated a complex computer aided design concept generated using macros programming

    NASA Astrophysics Data System (ADS)

    Rizal Ramly, Mohammad; Asrokin, Azharrudin; Abd Rahman, Safura; Zulkifly, Nurul Ain Md

    2013-12-01

    Changing a complex Computer Aided design profile such as car and aircraft surfaces has always been difficult and challenging. The capability of CAD software such as AutoCAD and CATIA show that a simple configuration of a CAD design can be easily modified without hassle, but it is not the case with complex design configuration. Design changes help users to test and explore various configurations of the design concept before the production of a model. The purpose of this study is to look into macros programming as parametric method of the commercial aircraft design. Macros programming is a method where the configurations of the design are done by recording a script of commands, editing the data value and adding a certain new command line to create an element of parametric design. The steps and the procedure to create a macro programming are discussed, besides looking into some difficulties during the process of creation and advantage of its usage. Generally, the advantages of macros programming as a method of parametric design are; allowing flexibility for design exploration, increasing the usability of the design solution, allowing proper contained by the model while restricting others and real time feedback changes.

  20. Design, Development, and Evaluation of Visual Aids for Communicating Prescription Drug Instructions to Nonliterate Patients in Rural Cameroon.

    ERIC Educational Resources Information Center

    Ngoh, Lucy N.; Shepherd, Marvin D.

    1997-01-01

    Culturally sensitive visual aids designed to help convey drug information to nonliterate female adults requiring antibiotics were developed. Researchers conceptualized the messages, and a local artist produced the visual aids. Comprehension and compliance with prescription instructions were evaluated (N=78). Results and practical implications are…

  1. Selegiline Transdermal System (STS) as an Aid for Smoking Cessation

    PubMed Central

    Gorgon, Liza; Jones, Karen; McSherry, Frances; Glover, Elbert D.; Anthenelli, Robert M.; Jackson, Thomas; Williams, Jill; Murtaugh, Cristin; Montoya, Ivan; Yu, Elmer; Elkashef, Ahmed

    2012-01-01

    Introduction: This study examined the efficacy and safety of selegiline transdermal system (STS) and brief repeated behavioral intervention (BRBI) for smoking cessation in heavy smokers. We hypothesized that the quit rate of subjects who received STS and BRBI would be significantly greater than that of those who received placebo patch and BRBI. Methods: This was a double-blind, placebo-controlled parallel-group study in which 246 men and women were randomized to receive either STS (n = 121) or placebo patch (n =125) for 9 weeks. Recruitment targeted heavy smokers, defined as individuals with self-reported use of ≥15 cigarettes/day in the 30 days prior to enrollment, who had smoked cigarettes for the past 5 years, and had an expired CO level ≥9 ppm during screening. Results: Although STS was well tolerated, the overall results indicated that STS with BRBI was not more effective than placebo plus BRBI for smoking cessation (p = .58). Conclusions: The results are discussed in relation to interventions for heavy smokers. Although 2 trials using oral selegiline both showed trends toward improved abstinence, these results indicate that STS with BRBI was not an effective aid for smoking cessation at the end of treatment (10 weeks), 14, or 26 weeks. PMID:21846661

  2. Hearing loss and the central auditory system: Implications for hearing aids

    NASA Astrophysics Data System (ADS)

    Frisina, Robert D.

    2003-04-01

    Hearing loss can result from disorders or damage to the ear (peripheral auditory system) or the brain (central auditory system). Here, the basic structure and function of the central auditory system will be highlighted as relevant to cases of permanent hearing loss where assistive devices (hearing aids) are called for. The parts of the brain used for hearing are altered in two basic ways in instances of hearing loss: (1) Damage to the ear can reduce the number and nature of input channels that the brainstem receives from the ear, causing plasticity of the central auditory system. This plasticity may partially compensate for the peripheral loss, or add new abnormalities such as distorted speech processing or tinnitus. (2) In some situations, damage to the brain can occur independently of the ear, as may occur in cases of head trauma, tumors or aging. Implications of deficits to the central auditory system for speech perception in noise, hearing aid use and future innovative circuit designs will be provided to set the stage for subsequent presentations in this special educational session. [Work supported by NIA-NIH Grant P01 AG09524 and the International Center for Hearing & Speech Research, Rochester, NY.

  3. Design and analysis tools for concurrent blackboard systems

    NASA Technical Reports Server (NTRS)

    Mcmanus, John W.

    1991-01-01

    A set of blackboard system design and analysis tools that consists of a knowledge source organizer, a knowledge source input/output connectivity analyzer, and a validated blackboard system simulation model is discussed. The author presents the structure and functionality of the knowledge source input/output connectivity analyzer. An example outlining the use of the analyzer to aid in the design of a concurrent tactical decision generator for air-to-air combat is presented. The blackboard system design and analysis tools were designed for generic blackboard systems and are application independent.

  4. NASA Space Engineering Research Center for VLSI systems design

    NASA Technical Reports Server (NTRS)

    1991-01-01

    This annual review reports the center's activities and findings on very large scale integration (VLSI) systems design for 1990, including project status, financial support, publications, the NASA Space Engineering Research Center (SERC) Symposium on VLSI Design, research results, and outreach programs. Processor chips completed or under development are listed. Research results summarized include a design technique to harden complementary metal oxide semiconductors (CMOS) memory circuits against single event upset (SEU); improved circuit design procedures; and advances in computer aided design (CAD), communications, computer architectures, and reliability design. Also described is a high school teacher program that exposes teachers to the fundamentals of digital logic design.

  5. New layer-based imaging and rapid prototyping techniques for computer-aided design and manufacture of custom dental restoration.

    PubMed

    Lee, M-Y; Chang, C-C; Ku, Y C

    2008-01-01

    Fixed dental restoration by conventional methods greatly relies on the skill and experience of the dental technician. The quality and accuracy of the final product depends mostly on the technician's subjective judgment. In addition, the traditional manual operation involves many complex procedures, and is a time-consuming and labour-intensive job. Most importantly, no quantitative design and manufacturing information is preserved for future retrieval. In this paper, a new device for scanning the dental profile and reconstructing 3D digital information of a dental model based on a layer-based imaging technique, called abrasive computer tomography (ACT) was designed in-house and proposed for the design of custom dental restoration. The fixed partial dental restoration was then produced by rapid prototyping (RP) and computer numerical control (CNC) machining methods based on the ACT scanned digital information. A force feedback sculptor (FreeForm system, Sensible Technologies, Inc., Cambridge MA, USA), which comprises 3D Touch technology, was applied to modify the morphology and design of the fixed dental restoration. In addition, a comparison of conventional manual operation and digital manufacture using both RP and CNC machining technologies for fixed dental restoration production is presented. Finally, a digital custom fixed restoration manufacturing protocol integrating proposed layer-based dental profile scanning, computer-aided design, 3D force feedback feature modification and advanced fixed restoration manufacturing techniques is illustrated. The proposed method provides solid evidence that computer-aided design and manufacturing technologies may become a new avenue for custom-made fixed restoration design, analysis, and production in the 21st century. PMID:18183523

  6. Computer-aided design of high-contact-ratio gears for minimum dynamic load and stress

    NASA Technical Reports Server (NTRS)

    Lin, Hsiang Hsi; Lee, Chinwai; Oswald, Fred B.; Townsend, Dennis P.

    1990-01-01

    A computer aided design procedure is presented for minimizing dynamic effects on high contact ratio gears by modification of the tooth profile. Both linear and parabolic tooth profile modifications of high contact ratio gears under various loading conditions are examined and compared. The effects of the total amount of modification and the length of the modification zone were systematically studied at various loads and speeds to find the optimum profile design for minimizing the dynamic load and the tooth bending stress. Parabolic profile modification is preferred over linear profile modification for high contact ratio gears because of its lower sensitivity to manufacturing errors. For parabolic modification, a greater amount of modification at the tooth tip and a longer modification zone are required. Design charts are presented for high contact ratio gears with various profile modifications operating under a range of loads. A procedure is illustrated for using the charts to find the optimum profile design.

  7. Satellite-aided land mobile communications system implementation considerations

    NASA Technical Reports Server (NTRS)

    Leroy, B. E.

    1982-01-01

    It was proposed that a satellite-based land mobile radio system could effectively extend the terrestrial cellular mobile system into rural and remote areas. The market, technical and economic feasibility for such a system is studied. Some of the aspects of implementing an operational mobile-satellite system are discussed. In particular, two key factors in implementation are examined: (1) bandwidth requirements; and (2) frequency sharing. Bandwidth requirements are derived based on the satellite antenna requirements, modulation characteristics and numbers of subscribers. Design trade-offs for the satellite system and potential implementation scenarios are identified. Frequency sharing is examined from a power flux density and modulation viewpoint. Previously announced in STAR as N82-25290

  8. FNAL system patching design

    SciTech Connect

    Schmidt, Jack; Lilianstrom, Al; Romero, Andy; Dawson, Troy; Sieh, Connie; /Fermilab

    2004-01-01

    FNAL has over 5000 PCs running either Linux or Windows software. Protecting these systems efficiently against the latest vulnerabilities that arise has prompted FNAL to take a more central approach to patching systems. Due to different levels of existing support infrastructures, the patching solution for linux systems differs from that of windows systems. In either case, systems are checked for vulnerabilities by Computer Security using the Nessus tool.

  9. Breaking the Glass Ceiling: Increasing the Meaningful Involvement of Women Living With HIV/AIDS (MIWA) in the Design and Delivery of HIV/AIDS Services.

    PubMed

    Carter, Allison; Greene, Saara; Nicholson, Valerie; O'Brien, Nadia; Sanchez, Margarite; de Pokomandy, Alexandra; Loutfy, Mona; Kaida, Angela

    2015-01-01

    The meaningful involvement of women living with HIV/AIDS (MIWA) is a key feature of women-centred HIV care, yet little is known about transforming MIWA from principle to practice. Drawing on focus group data from the Canadian HIV Women's Sexual and Reproductive Health Cohort Study (CHIWOS), we explored HIV-positive women's meaningful involvement in the design and delivery of HIV/AIDS services in British Columbia, Canada. In this article, we highlight the benefits and tensions that emerge as women traverse multiple roles as service users and service providers within their care communities, and the impact this has on their access to care and overall health. PMID:25256222

  10. Fatigue analysis of computer-aided design/computer-aided manufacturing resin-based composite vs. lithium disilicate glass-ceramic.

    PubMed

    Ankyu, Shuhei; Nakamura, Keisuke; Harada, Akio; Hong, Guang; Kanno, Taro; Niwano, Yoshimi; Örtengren, Ulf; Egusa, Hiroshi

    2016-08-01

    Resin-based composite molar crowns made by computer-aided design/computer-aided manufacturing (CAD/CAM) systems have been proposed as an inexpensive alternative to metal-ceramic or all-ceramic crowns. However, there is a lack of scientific information regarding fatigue resistance. This study aimed to analyze the fatigue behavior of CAD/CAM resin-based composite compared with lithium disilicate glass-ceramic. One-hundred and sixty bar-shaped specimens were fabricated using resin-based composite blocks [Lava Ultimate (LU); 3M/ESPE] and lithium disilicate glass-ceramic [IPS e.max press (EMP); Ivoclar/Vivadent]. The specimens were divided into four groups: no treatment (NT); thermal cycling (TC); mechanical cycling (MC); and thermal cycling followed by mechanical cycling (TCMC). Thermal cycling was performed by alternate immersion in water baths of 5°C and 55°C for 5 × 10(4) cycles. Mechanical cycling was performed in a three-point bending test, with a maximum load of 40 N, for 1.2 × 10(6) cycles. In addition, LU and EMP molar crowns were fabricated and subjected to fatigue treatments followed by load-to-failure testing. The flexural strength of LU was not severely reduced by the fatigue treatments. The fatigue treatments did not significantly affect the fracture resistance of LU molar crowns. The results demonstrate the potential of clinical application of CAD/CAM-generated resin-based composite molar crowns in terms of fatigue resistance. PMID:27203408

  11. A novel AIDS/HIV intelligent medical consulting system based on expert systems

    PubMed Central

    Ebrahimi, Alireza Pour; Toloui Ashlaghi, Abbas; Mahdavy Rad, Maryam

    2013-01-01

    Background: The purpose of this paper is to propose a novel intelligent model for AIDS/HIV data based on expert system and using it for developing an intelligent medical consulting system for AIDS/HIV. Materials and Methods: In this descriptive research, 752 frequently asked questions (FAQs) about AIDS/HIV are gathered from numerous websites about this disease. To perform the data mining and extracting the intelligent model, the 6 stages of Crisp method has been completed for FAQs. The 6 stages include: Business understanding, data understanding, data preparation, modelling, evaluation and deployment. C5.0 Tree classification algorithm is used for modelling. Also, rational unified process (RUP) is used to develop the web-based medical consulting software. Stages of RUP are as follows: Inception, elaboration, construction and transition. The intelligent developed model has been used in the infrastructure of the software and based on client's inquiry and keywords related FAQs are displayed to the client, according to the rank. FAQs’ ranks are gradually determined considering clients reading it. Based on displayed FAQs, test and entertainment links are also displayed. Result: The accuracy of the AIDS/HIV intelligent web-based medical consulting system is estimated to be 78.76%. Conclusion: AIDS/HIV medical consulting systems have been developed using intelligent infrastructure. Being equipped with an intelligent model, providing consulting services on systematic textual data and providing side services based on client's activities causes the implemented system to be unique. The research has been approved by Iranian Ministry of Health and Medical Education for being practical. PMID:24251290

  12. DDL system: Design systhesis of digital systems

    NASA Technical Reports Server (NTRS)

    Shiva, S. G.

    1983-01-01

    Digital Systems Design Language was integrated into the CADAT system environment of NASA-MSFC. The major technical aspects of this integration are summarized. Automatic hardware synthesis is now possible starting with a high level description of the system to be synthesized. The DDL system provides a high level design verification capability, thereby minimizing design changes in the later stages of the design cycle. An overview of the DDL system covering the translation, simulation and synthesis capabilities is provided. Two companion documents (the user's and programmer's manuals) are to be consulted for detailed discussions.

  13. The servicing aid tool: A teleoperated robotics system for space applications

    NASA Technical Reports Server (NTRS)

    Dorman, Keith W.; Pullen, John L.; Keksz, William O.; Eismann, Paul H.; Kowalski, Keith A.; Karlen, James P.

    1994-01-01

    The Servicing Aid Tool (SAT) is a teleoperated, force-reflecting manipulation system designed for use on the Space Shuttle. The system will assist Extravehicular Activity (EVA) servicing of spacecraft such as the Hubble Space Telescope. The SAT stands out from other robotics development programs in that special attention was given to provide a low-cost, space-qualified design which can easily and inexpensively be reconfigured and/or enhanced through the addition of existing NASA funded technology as that technology matures. SAT components are spaceflight adaptations of existing ground-based designs from Robotics Research Corporation (RRC), the leading supplier of robotics systems to the NASA and university research community in the United States. Fairchild Space is the prime contractor and provides the control electronics, safety system, system integration, and qualification testing. The manipulator consists of a 6-DOF Slave Arm mounted on a 1-DOF Positioning Link in the shuttle payload bay. The Slave Arm is controlled via a highly similar, 6-DOF, force-reflecting Master Arm from Schilling Development, Inc. This work is being performed under contract to the Goddard Space Flight Center Code, Code 442, Hubble Space Telescope Flight Systems and Servicing Project.

  14. Insertion device vacuum system designs

    SciTech Connect

    Hoyer, E.

    1988-05-01

    Synchrotron light source insertion device vacuum systems now in operation and systems proposed for the future are reviewed. An overview of insertion devices is given and four generic vacuum chamber designs, transition section design and pumping considerations are discussed. Examples of vacuum chamber systems are presented.

  15. Java interface to a computer-aided diagnosis system for acute pulmonary embolism using PIOPED findings

    NASA Astrophysics Data System (ADS)

    Frederick, Erik D.; Tourassi, Georgia D.; Gauger, Matthew; Floyd, Carey E., Jr.

    1999-05-01

    An interface to a Computer Aided Diagnosis (CAD) system for diagnosis of Acute Pulmonary Embolism (PE) from PIOPED radiographic findings was developed. The interface is based on Internet technology which is user-friendly and available on a broad range of computing platforms. It was designed to be used as a research tool and as a data collection tool, allowing researchers to observe the behavior of a CAD system and to collect radiographic findings on ventilation-perfusion lung scans and chest radiographs. The interface collects findings from physicians in the PIOPED reporting format, processes those findings and presents them as inputs to an artificial neural network (ANN) previously trained on findings from 1,064 patients from the Prospective Investigation of Pulmonary Embolism Diagnosis (PIOPED) study. The likelihood of PE predicted by the ANN and by the physician using the system is then saved for later analysis.

  16. Manufacturing cost/design system: A CAD/CAM dialogue

    NASA Technical Reports Server (NTRS)

    Loshigian, H. H.; Rachowitz, B. I.; Judson, D.

    1980-01-01

    The development of the Manufacturing Cost/Design System (MC/DS) will provide the aerospace design engineer a tool with which to perform heretofore impractical design manufacturing cost tradeoffs. The Air Force Integrated Computer Aided Manufacturing (ICAM) Office has initiated the development and demonstration of an MC/DS which, when fully implemented, will integrate both design and manufacturing data bases to provide real time visibility into the manufacturing costs associated with various design options. The first release of a computerized system will be made before the end of 1981.

  17. Geologic considerations in underground coal mining system design

    NASA Technical Reports Server (NTRS)

    Camilli, F. A.; Maynard, D. P.; Mangolds, A.; Harris, J.

    1981-01-01

    Geologic characteristics of coal resources which may impact new extraction technologies are identified and described to aid system designers and planners in their task of designing advanced coal extraction systems for the central Appalachian region. These geologic conditions are then organized into a matrix identified as the baseline mine concept. A sample region, eastern Kentucy is analyzed using both the developed baseline mine concept and the traditional geologic investigative approach.

  18. Operator function modeling: Cognitive task analysis, modeling and intelligent aiding in supervisory control systems

    NASA Technical Reports Server (NTRS)

    Mitchell, Christine M.

    1990-01-01

    The design, implementation, and empirical evaluation of task-analytic models and intelligent aids for operators in the control of complex dynamic systems, specifically aerospace systems, are studied. Three related activities are included: (1) the models of operator decision making in complex and predominantly automated space systems were used and developed; (2) the Operator Function Model (OFM) was used to represent operator activities; and (3) Operator Function Model Expert System (OFMspert), a stand-alone knowledge-based system was developed, that interacts with a human operator in a manner similar to a human assistant in the control of aerospace systems. OFMspert is an architecture for an operator's assistant that uses the OFM as its system and operator knowledge base and a blackboard paradigm of problem solving to dynamically generate expectations about upcoming operator activities and interpreting actual operator actions. An experiment validated the OFMspert's intent inferencing capability and showed that it inferred the intentions of operators in ways comparable to both a human expert and operators themselves. OFMspert was also augmented with control capabilities. An interface allowed the operator to interact with OFMspert, delegating as much or as little control responsibility as the operator chose. With its design based on the OFM, OFMspert's control capabilities were available at multiple levels of abstraction and allowed the operator a great deal of discretion over the amount and level of delegated control. An experiment showed that overall system performance was comparable for teams consisting of two human operators versus a human operator and OFMspert team.

  19. GA-Based Computer-Aided Electromagnetic Design of Two-Phase SRM for Compressor Drives

    NASA Astrophysics Data System (ADS)

    Kano, Yoshiaki; Kosaka, Takashi; Matsui, Nobuyuki

    This paper presents an approach to Genetic Algorithm (GA)-based computer-aided autonomous electromagnetic design of 2-phase Switched Reluctance Motor drives. The proposed drive is designed for compressor drives in low-priced refrigerators as an alternative to existing brushless DC motors drives with rare-earth magnets. In the proposed design approach, three GA loops work to optimize the lamination design so as to meet the requirements for the target application under the given constraints while simultaneously fine-tuning the control parameters. To achieve the design optimization within an acceptable CPU-time, the repeated-calculation required to obtain fitness evaluation in the proposed approach does not use FEM, but consists of geometric flux tube-based non-linear magnetic analysis and a dynamic simulator based on an analytical expression of the magnetizing curves obtained from the non-linear magnetic analysis. The design results show the proposed approach can autonomously find a feasible design solution of SRM drive for the target application from huge search space. The experimental studies using a 2-phase 8/6 prototype manufactured in accordance with the optimized design parameters show the validity of the proposed approach.

  20. Toward the computer-aided design of metal ion sequestering agents

    SciTech Connect

    Hay, Benjamin P.; Firman, Timothy K.; Lumetta, Gregg J.; Rapko, Brian M.; Garza, Priscilla A.; Sinkov, Sergei I.; Hutchison, James E.; Parks, Bevin W.; Gilbertson, Robert D.; Weakley, Timothy J R

    2004-07-14

    The concepts embodied in de novo structure-based drug design are being adapted for the computer-aided design of metal ion sequestering agents. This adaptation requires the development of methods for (i) generating candidate structures and (ii) evaluating and prioritizing these structures with respect to their binding affinity for a specific guest. This article summarizes recent progress in this area that includes the creation of a new computer software program, called HostDesigner, that can generate and evaluate millions of new molecular structures per minute on a desktop personal computer. Several methods for evaluating the degree of binding site organization in a host structure are presented. An example is provided to demonstrate how these methods have been used to identify ligand architectures that provide enhanced metal ion binding affinity.

  1. Lithium-ion batteries for hearing aid applications: I. Design and performance

    NASA Astrophysics Data System (ADS)

    Passerini, S.; Owens, B. B.; Coustier, F.

    Rechargeable batteries have been designed for powering hearing aid devices (HAD). The cells, based on the lithium-ion chemistry, were designed in a size that is compatible with the existing HAD. The 10 mA h batteries were tested to characterize the design and the electrochemical performance from the point of view of a typical HAD application. Results are presented for constant-current tests, first-cycle conditions, charge voltage cut-off, rate performance, and cycle life. The pulse capabilities and the preliminary safety tests of the batteries will be presented in a following report. The results of the lithium-ion HAD cells developed in this project are compared with other battery chemistries: lithium-alloy and nickel-metal hydride secondary batteries and Zn-air primary batteries.

  2. Mechanical Design Technology--Modified. (Computer Assisted Drafting, Computer Aided Design). Curriculum Grant 84/85.

    ERIC Educational Resources Information Center

    Schoolcraft Coll., Livonia, MI.

    This document is a curriculum guide for a program in mechanical design technology (computer-assisted drafting and design developed at Schoolcraft College, Livonia, Michigan). The program helps students to acquire the skills of drafters and to interact with electronic equipment, with the option of becoming efficient in the computer-aided…

  3. A convenient method for the computer-aided molecular design of carborane containing compounds.

    PubMed

    Johnsamuel, Jayaseharan; Byun, Youngjoo; Jones, Thomas P; Endo, Yasuyuki; Tjarks, Werner

    2003-10-01

    Computer-aided molecular design (CAMD) of carborane containing compounds is of growing interest for scientists involved in boron neutron capture therapy (BNCT) and other pharmaceutical applications. However, the complex organo-metallic structures of carboranes pose difficulties in modeling and docking of these structures. This is the first report of a new strategy for modeling and docking of carborane containing molecules with the readily available software packages HyperChem, SYBYL and FlexX. It is intended as a guide for boron chemists interested in using CAMD of carborane containing agents for medical applications such as BNCT. PMID:12951095

  4. RETRACTED: Auricular prosthesis fabrication using computer-aided design and rapid prototyping technologies.

    PubMed

    Shah, Mayank

    2016-06-01

    At the request of the editorMayank Shah 'Auricular prosthesis fabrication using computer-aided design and rapid prototyping technologies' Prosthetics and Orthotics International, published online before print on October 8, 2013 as doi:10.1177/0309364613504779has been retracted. This is because it contains unattributed overlap withK. Subburaj, C. Nair, S. Rajesh, S. M. Meshram, B. Ravi 'Rapid development of auricular prosthesis using CAD and rapid prototyping technologies' International Journal of Oral & Maxillofacial Surgery 2007; 36: 938-943 doi:10.1016/j.ijom.2007.07.013. PMID:24104058

  5. Computer Aided Design of Depressed Collectors for High Power Electron Tubes

    NASA Astrophysics Data System (ADS)

    Singh, A.; Valfells, A.; Kolander, M.; Granatstein, V. L.

    2003-12-01

    We present an overview of techniques and computer codes developed by us for systematic design of depressed collectors with special reference to devices that use gyrating electron beams. These techniques facilitate achievement of high power levels in electron tubes. ProfilEM is an aid to controlling the trajectories of primary electrons. BSCAT provides for tracing the trajectories of backscattered electrons. Multiple generations of backscatter can be obtained, while keeping the number of rays to be tracked within manageable limits. We describe examples of applying these codes to the case of two-stage depressed collectors for a 1.5 MW 110 GHz gyrotron.

  6. A Novel Paradigm for Computer-Aided Design: TRIZ-Based Hybridization of Topologically Optimized Density Distributions

    NASA Astrophysics Data System (ADS)

    Cardillo, A.; Cascini, G.; Frillici, F. S.; Rotini, F.

    In a recent project the authors have proposed the adoption of Optimization Systems [1] as a bridging element between Computer-Aided Innovation (CAI) and PLM to identify geometrical contradictions [2], a particular case of the TRIZ physical contradiction [3]. A further development of the research [4] has revealed that the solutions obtained from several topological optimizations can be considered as elementary customized modeling features for a specific design task. The topology overcoming the arising geometrical contradiction can be obtained through a manipulation of the density distributions constituting the conflicting pair. Already two strategies of density combination have been identified as capable to solve geometrical contradictions and several others are under extended testing. The paper illustrates the most recent results of the ongoing research mainly related to the extension of the algorithms from 2D to 3D design spaces. The whole approach is clarified by means of two detailed examples, where the proposed technique is compared with classical multi-goal optimization.

  7. Virtual Display Design and Evaluation of Clothing: A Design Process Support System

    ERIC Educational Resources Information Center

    Zhang, Xue-Fang; Huang, Ren-Qun

    2014-01-01

    This paper proposes a new computer-aided educational system for clothing visual merchandising and display. It aims to provide an operating environment that supports the various stages of display design in a user-friendly and intuitive manner. First, this paper provides a brief introduction to current software applications in the field of…

  8. Don't Fix the Student-Aid System. Kill It

    ERIC Educational Resources Information Center

    Ronstadt, Robert

    2009-01-01

    The American student-aid system has long been based on a tacit promise to provide students with the means to complete their college education and ensure that money is not a barrier to getting a degree. Unfortunately, says the writer, student aid has become little more than a marketing mechanism that permits colleges to maximize tuition dollars…

  9. Aerothermodynamic systems engineering and design

    NASA Astrophysics Data System (ADS)

    A reference source for various aspects of aerothermodynamic systems engineering and design is presented. Air conditioning load analysis is addressed, including physiological requirements, heat and cooling load equations, skin temperature computational methods, cooling loads due to radiation through transparent areas, heating and cooling loads due to internal sources, and practical considerations in the determination of overall heating and cooling loads. Refrigeration system design is considered, including air cycle systems, vapor cycle systems, combined vapor cycle and air cycle systems, and thermoelectric cooling. Heating methods is heating system design and low pressure and high pressure systems in air distribution system design are addressed. Procedures and equations commonly used for aerospace applications of these technologies are included.

  10. Designing an Online Writing System: Learning with Support

    ERIC Educational Resources Information Center

    Kuo, Chih-Hua

    2008-01-01

    The potential of online language learning has received much attention recently. This paper reports the design of an online writing system featuring learning support for non-native students during their writing process. The central premise is that in the online writing situation, students are in great need of writing aids. The proposed system…

  11. COMPUTER ASSISTED PRELIMINARY DESIGN FOR DRINKING WATER TREATMENT PROCESS SYSTEMS

    EPA Science Inventory

    The purpose of the study was to develop an interactive computer program to aid the design engineer in evaluating the performance and cost for any proposed drinking water treatment system consisting of individual unit processes. The 25 unit process models currently in the program ...

  12. Computer aided decision support system for cervical cancer classification

    NASA Astrophysics Data System (ADS)

    Rahmadwati, Rahmadwati; Naghdy, Golshah; Ros, Montserrat; Todd, Catherine

    2012-10-01

    Conventional analysis of a cervical histology image, such a pap smear or a biopsy sample, is performed by an expert pathologist manually. This involves inspecting the sample for cellular level abnormalities and determining the spread of the abnormalities. Cancer is graded based on the spread of the abnormal cells. This is a tedious, subjective and time-consuming process with considerable variations in diagnosis between the experts. This paper presents a computer aided decision support system (CADSS) tool to help the pathologists in their examination of the cervical cancer biopsies. The main aim of the proposed CADSS system is to identify abnormalities and quantify cancer grading in a systematic and repeatable manner. The paper proposes three different methods which presents and compares the results using 475 images of cervical biopsies which include normal, three stages of pre cancer, and malignant cases. This paper will explore various components of an effective CADSS; image acquisition, pre-processing, segmentation, feature extraction, classification, grading and disease identification. Cervical histological images are captured using a digital microscope. The images are captured in sufficient resolution to retain enough information for effective classification. Histology images of cervical biopsies consist of three major sections; background, stroma and squamous epithelium. Most diagnostic information are contained within the epithelium region. This paper will present two levels of segmentations; global (macro) and local (micro). At the global level the squamous epithelium is separated from the background and stroma. At the local or cellular level, the nuclei and cytoplasm are segmented for further analysis. Image features that influence the pathologists' decision during the analysis and classification of a cervical biopsy are the nuclei's shape and spread; the ratio of the areas of nuclei and cytoplasm as well as the texture and spread of the abnormalities

  13. User's manual: Computer-aided design programs for inductor-energy-storage dc-to-dc electronic power converters

    NASA Technical Reports Server (NTRS)

    Huffman, S.

    1977-01-01

    Detailed instructions on the use of two computer-aided-design programs for designing the energy storage inductor for single winding and two winding dc to dc converters are provided. Step by step procedures are given to illustrate the formatting of user input data. The procedures are illustrated by eight sample design problems which include the user input and the computer program output.

  14. Software-Design-Analyzer System

    NASA Technical Reports Server (NTRS)

    Tausworthe, Robert C.

    1991-01-01

    CRISP-90 software-design-analyzer system, update of CRISP-80, is set of computer programs constituting software tool for design and documentation of other software and supporting top-down, hierarchical, modular, structured methodologies for design and programming. Written in Microsoft QuickBasic.

  15. Mars oxygen production system design

    NASA Technical Reports Server (NTRS)

    Cotton, Charles E.; Pillow, Linda K.; Perkinson, Robert C.; Brownlie, R. P.; Chwalowski, P.; Carmona, M. F.; Coopersmith, J. P.; Goff, J. C.; Harvey, L. L.; Kovacs, L. A.

    1989-01-01

    The design and construction phase is summarized of the Mars oxygen demonstration project. The basic hardware required to produce oxygen from simulated Mars atmosphere was assembled and tested. Some design problems still remain with the sample collection and storage system. In addition, design and development of computer compatible data acquisition and control instrumentation is ongoing.

  16. MONIFORMS as Authoring Aids for the PLATO IV CAI System.

    ERIC Educational Resources Information Center

    Schulz, Russel E.

    An analysis of portions of the HumRRO (Human Resources Research Organization) developed computer-assisted instruction (CAI) course in COBOL programing, and a survey of representatives from Advanced Research Project Agency (ARPA) PLATO IV installations indicated a need for authoring aids that could be prepared and programed easily and quickly. The…

  17. eWorkbook: A Computer Aided Assessment System

    ERIC Educational Resources Information Center

    Costagliola, Gennaro; Ferrucci, Filomena; Fuccella, Vittorio; Oliveto, Rocco

    2007-01-01

    Computer aided assessment (CAA) tools are more and more widely adopted in academic environments mixed to other assessment means. In this article, we present a CAA Web application, named eWorkbook, which can be used for evaluating learner's knowledge by creating (the tutor) and taking (the learner) on-line tests based on multiple choice, multiple…

  18. Music and hearing aids.

    PubMed

    Madsen, Sara M K; Moore, Brian C J

    2014-01-01

    The signal processing and fitting methods used for hearing aids have mainly been designed to optimize the intelligibility of speech. Little attention has been paid to the effectiveness of hearing aids for listening to music. Perhaps as a consequence, many hearing-aid users complain that they are not satisfied with their hearing aids when listening to music. This issue inspired the Internet-based survey presented here. The survey was designed to identify the nature and prevalence of problems associated with listening to live and reproduced music with hearing aids. Responses from 523 hearing-aid users to 21 multiple-choice questions are presented and analyzed, and the relationships between responses to questions regarding music and questions concerned with information about the respondents, their hearing aids, and their hearing loss are described. Large proportions of the respondents reported that they found their hearing aids to be helpful for listening to both live and reproduced music, although less so for the former. The survey also identified problems such as distortion, acoustic feedback, insufficient or excessive gain, unbalanced frequency response, and reduced tone quality. The results indicate that the enjoyment of listening to music with hearing aids could be improved by an increase of the input and output dynamic range, extension of the low-frequency response, and improvement of feedback cancellation and automatic gain control systems. PMID:25361601

  19. Music and Hearing Aids

    PubMed Central

    Moore, Brian C. J.

    2014-01-01

    The signal processing and fitting methods used for hearing aids have mainly been designed to optimize the intelligibility of speech. Little attention has been paid to the effectiveness of hearing aids for listening to music. Perhaps as a consequence, many hearing-aid users complain that they are not satisfied with their hearing aids when listening to music. This issue inspired the Internet-based survey presented here. The survey was designed to identify the nature and prevalence of problems associated with listening to live and reproduced music with hearing aids. Responses from 523 hearing-aid users to 21 multiple-choice questions are presented and analyzed, and the relationships between responses to questions regarding music and questions concerned with information about the respondents, their hearing aids, and their hearing loss are described. Large proportions of the respondents reported that they found their hearing aids to be helpful for listening to both live and reproduced music, although less so for the former. The survey also identified problems such as distortion, acoustic feedback, insufficient or excessive gain, unbalanced frequency response, and reduced tone quality. The results indicate that the enjoyment of listening to music with hearing aids could be improved by an increase of the input and output dynamic range, extension of the low-frequency response, and improvement of feedback cancellation and automatic gain control systems. PMID:25361601

  20. A Design for a Model College Financial Aid Office. Revised 1980.

    ERIC Educational Resources Information Center

    Van Dusen, William D.; O'Hearne, John J.

    The third edition of a guide for the college financial aid office substantially modifies previously presented material because of the changes that have been occurring in college student financial aid. Topics are as follows: development of student financial aid programs; current forms of college student financial aid; principles and practices of…

  1. Current Status of Computer-Aided Drug Design for Type 2 Diabetes

    PubMed Central

    Bibi, Shabana; Sakata, Katsumi

    2016-01-01

    Background Diabetes is a metabolic disorder that requires multiple therapeutic approaches. The pancreas loses its functionality to properly produce the insulin hormone in patients with diabetes mellitus. In 2012, more than one million people worldwide died as a result of diabetes, which was the eighth leading cause of death. Objective Most drugs currently available and approved by the U.S. Food and Drug Administration cannot reach an adequate level of glycemic control in diabetic patients, and have many side effects; thus, new classes of compounds are required. Efforts based on computer-aided drug design (CADD) can mine a large number of databases to produce new and potent hits and minimize the requirement of time and dollars for new discoveries. Methods Pharmaceutical sciences have made progress with advances in drug design concepts. Virtual screening of large databases is most compatible with different computational methods such as molecular docking, pharmacophore, quantitative structure-activity relationship, and molecular dynamic simulation. Contribution of these methods in selection of antidiabetic compounds has been discussed. Results The Computer-Aided Drug Design (CADD) approach has contributed to successful discovery of novel anti-diabetic agents. This mini-review focuses on CADD approach on currently approved drugs and new therapeutic agents-in-development that may achieve suitable glucose levels and decrease the risk of hypoglycemia, which is a major obstacle to glucose control and a special concern for therapies that increase insulin levels. Conclusion Drug design and development for type 2 diabetes have been actively studied. However, a large number of antidiabetic drugs are still in early stages of development. The conventional target- and structure-based approaches can be regarded as part of the efforts toward therapeutic mechanism-based drug design for treatment of type 2 diabetes. It is expected that further improvement in CADD approach will

  2. Evaluation of computer-aided foundation design techniques for fossil fuel power plants. Final report. [Includes list of firms involved, equipment, software, etc

    SciTech Connect

    Kulhawy, F.H.; Dill, J.C.; Trautmann, C.H.

    1984-11-01

    The use of an integrated computer-aided drafting and design system for fossil fuel power plant foundations would offer utilities considerable savings in engineering costs and design time. The technology is available, but research is needed to develop software, a common data base, and data management procedures. An integrated CADD system suitable for designing power plant foundations should include the ability to input, display, and evaluate geologic, geophysical, geotechnical, and survey field data; methods for designing piles, mats, footings, drilled shafts, and other foundation types; and the capability of evaluating various load configurations, soil-structure interactions, and other construction factors that influence design. Although no such integrated system exists, the survey of CADD techniques showed that the technology is available to computerize the whole foundation design process, from single-foundation analysis under single loads to three-dimensional analysis under earthquake loads. The practices of design firms using CADD technology in nonutility applications vary widely. Although all the firms surveyed used computer-aided drafting, only two used computer graphics in routine design procedures, and none had an integrated approach to using CADD for geotechnical engineering. All the firms had developed corporate policies related to system security, supervision, overhead allocation, training, and personnel compensation. A related EPRI project RP2514, is developing guidelines for applying CADD systems to entire generating-plant construction projects. 4 references, 6 figures, 6 tables.

  3. A system for evaluating the use of media in CDC's National AIDS Information and Education Program.

    PubMed Central

    Salmon, C T; Jason, J

    1991-01-01

    The National AIDS Information and Education Program (NAIEP) commissioned the National Academy of Sciences to design a prototypical system of research for use in the evaluation of the agency's media campaign. It consists of four types of evaluation: formative, efficacy, process, and outcome. These types of evaluations are used to answer such questions as the following: What message strategies will work best? Can a campaign under optimal conditions be expected to make a difference? What interventions are actually delivered during the campaign? Has the campaign actually had an impact? How NAIEP has used the system and adapted it during 1 year of research activities is outlined, and examples from a variety of other social marketing programs are described. PMID:1659710

  4. Designing Systems for Environmental Sustainability

    EPA Science Inventory

    Dr. Smith will describe his U.S. EPA research which involves elements of design, from systems as diverse as biofuel supply chains to recycling systems and chemical processes. Design uses models that rate performance as part of a synthesis approach, where steps of analysis and sy...

  5. REC Tracking Systems Design Guide

    SciTech Connect

    Meredith Wingate

    2004-02-03

    OAK-B135 The Design Guide is presented in three parts. Section II describes the need for REC tracking, the two principal tracking methods available, and, in simple terms, the operation of certificate-based systems. Section III presents the major issues in the design of certificate-based tracking systems and discusses the advantages and disadvantages of alternative solutions. Finally, Section IV offers design principles or recommendations for most of these issues.

  6. Computer-aided Molecular Design of Compounds Targeting Histone Modifying Enzymes

    PubMed Central

    Andreoli, Federico; Del Rio, Alberto

    2015-01-01

    Growing evidences show that epigenetic mechanisms play crucial roles in the genesis and progression of many physiopathological processes. As a result, research in epigenetic grew at a fast pace in the last decade. In particular, the study of histone post-translational modifications encountered an extraordinary progression and many modifications have been characterized and associated to fundamental biological processes and pathological conditions. Histone modifications are the catalytic result of a large set of enzyme families that operate covalent modifications on specific residues at the histone tails. Taken together, these modifications elicit a complex and concerted processing that greatly contribute to the chromatin remodeling and may drive different pathological conditions, especially cancer. For this reason, several epigenetic targets are currently under validation for drug discovery purposes and different academic and industrial programs have been already launched to produce the first pre-clinical and clinical outcomes. In this scenario, computer-aided molecular design techniques are offering important tools, mainly as a consequence of the increasing structural information available for these targets. In this mini-review we will briefly discuss the most common types of known histone modifications and the corresponding operating enzymes by emphasizing the computer-aided molecular design approaches that can be of use to speed-up the efforts to generate new pharmaceutically relevant compounds. PMID:26082827

  7. LIFESPAN: A tool for the computer-aided design of longitudinal studies

    PubMed Central

    Brandmaier, Andreas M.; von Oertzen, Timo; Ghisletta, Paolo; Hertzog, Christopher; Lindenberger, Ulman

    2015-01-01

    Researchers planning a longitudinal study typically search, more or less informally, a multivariate space of possible study designs that include dimensions such as the hypothesized true variance in change, indicator reliability, the number and spacing of measurement occasions, total study time, and sample size. The main search goal is to select a research design that best addresses the guiding questions and hypotheses of the planned study while heeding applicable external conditions and constraints, including time, money, feasibility, and ethical considerations. Because longitudinal study selection ultimately requires optimization under constraints, it is amenable to the general operating principles of optimization in computer-aided design. Based on power equivalence theory (MacCallum et al., 2010; von Oertzen, 2010), we propose a computational framework to promote more systematic searches within the study design space. Starting with an initial design, the proposed framework generates a set of alternative models with equal statistical power to detect hypothesized effects, and delineates trade-off relations among relevant parameters, such as total study time and the number of measurement occasions. We present LIFESPAN (Longitudinal Interactive Front End Study Planner), which implements this framework. LIFESPAN boosts the efficiency, breadth, and precision of the search for optimal longitudinal designs. Its initial version, which is freely available at http://www.brandmaier.de/lifespan, is geared toward the power to detect variance in change as specified in a linear latent growth curve model. PMID:25852596

  8. Computer-aided design comparisons of monolithic and hybrid MEM-tunable VCSELs

    NASA Astrophysics Data System (ADS)

    Ochoa, Edward M.; Nelson, Thomas R., Jr.; Blum-Spahn, Olga; Lott, James A.

    2003-07-01

    We report and use our micro-electro-mechanically tunable vertical cavity surface emitting laser (MEM-TVCSEL) computer-aided design methodology to investigate the resonant frequency design space for monolithic and hybrid MEM-TVCSELs. For various initial optical air gap thickness, we examine the sensitivity of monolithic or hybrid MEM-TVCSEL resonant frequency by simulating zero, two, and four percent variations in III-V material growth thickness. As expected, as initial optical airgap increases, tuning range decreases due to less coupling between the active region and the tuning mirror. However, each design has different resonant frequency sensitivity to variations in III-V growth parameters. In particular, since the monolithic design is comprised of III-V material, the shift in all growth thicknesses significantly shifts the resonant frequency response. However, for hybrid MEMTVCSELs, less shift results, since the lower reflector is an Au mirror with reflectivity independent of III-V growth variations. Finally, since the hybrid design is comprised of a MUMPS polysilicon mechanical actuator, pull-in voltage remains independent of the initial optical airgap between the tuning reflector and the III-V material. Conversely, as the initial airgap increases in the monolithic design, the pull-in voltage significantly increases.

  9. LIFESPAN: A tool for the computer-aided design of longitudinal studies.

    PubMed

    Brandmaier, Andreas M; von Oertzen, Timo; Ghisletta, Paolo; Hertzog, Christopher; Lindenberger, Ulman

    2015-01-01

    Researchers planning a longitudinal study typically search, more or less informally, a multivariate space of possible study designs that include dimensions such as the hypothesized true variance in change, indicator reliability, the number and spacing of measurement occasions, total study time, and sample size. The main search goal is to select a research design that best addresses the guiding questions and hypotheses of the planned study while heeding applicable external conditions and constraints, including time, money, feasibility, and ethical considerations. Because longitudinal study selection ultimately requires optimization under constraints, it is amenable to the general operating principles of optimization in computer-aided design. Based on power equivalence theory (MacCallum et al., 2010; von Oertzen, 2010), we propose a computational framework to promote more systematic searches within the study design space. Starting with an initial design, the proposed framework generates a set of alternative models with equal statistical power to detect hypothesized effects, and delineates trade-off relations among relevant parameters, such as total study time and the number of measurement occasions. We present LIFESPAN (Longitudinal Interactive Front End Study Planner), which implements this framework. LIFESPAN boosts the efficiency, breadth, and precision of the search for optimal longitudinal designs. Its initial version, which is freely available at http://www.brandmaier.de/lifespan, is geared toward the power to detect variance in change as specified in a linear latent growth curve model. PMID:25852596

  10. The use of a spatial information system in the management of HIV/AIDS in South Africa

    PubMed Central

    Busgeeth, Karishma; Rivett, Ulrike

    2004-01-01

    Background South Africa is experiencing an HIV/AIDS pandemic of shattering dimensions. The availability and provision of antiretroviral (ARV) drugs could bring relief to the situation, but the treatment is unfortunately complex with each patient being assigned a different antiretroviral therapy varying in diet-medication regiment. The context of South Africa, its variety of urban and rural settings adds to the challenge of administering and monitoring the HIV+ person throughout the treatment, which will last for the rest of their lives. The lack of physical infrastructure, reliable statistics and adequate resources hinder the efficient management of HIV/AIDS. Results The collection of reliable data will be a first step to assess the status of HIV/AIDS in communities. A number of hospitals have started this process using the conventional approach to collect information about their patients using a paper-based system. Since time is of essence in the fight against the pandemic, data exchange between various hospitals, municipalities and decision-making bodies is becoming more and more important. The logical response to such a need is a computerised system, which will collect and administer HIV/AIDS related information within the local context and allow a monitored access to the data from a number of stakeholders. Conclusions The purpose of this study was to design and develop an HIV/AIDS database, which is embedded in a Spatial Information Management System. The pilot study area is the Gugulethu township in Cape Town where more than 27% of the 325 000 residents are HIV+. It is shown that the implementation of the HIV/AIDS database and the Spatial Information Management System can play a critical role in determining where and when to intervene, improving the quality of care for HIV+ patients, increasing accessibility of service and delivering a cost-effective mode of information. PMID:15239839

  11. Computer aided design and manufacturing of composite propfan blades for a cruise missile wind tunnel model

    NASA Technical Reports Server (NTRS)

    Thorp, Scott A.; Downey, Kevin M.

    1992-01-01

    One of the propulsion concepts being investigated for future cruise missiles is advanced unducted propfans. To support the evaluation of this technology applied to the cruise missile, a joint DOD and NASA test project was conducted to design and then test the characteristics of the propfans on a 0.55-scale, cruise missile model in a NASA wind tunnel. The configuration selected for study is a counterrotating rearward swept propfan. The forward blade row, having six blades, rotates in a counterclockwise direction, and the aft blade row, having six blades, rotates in a clockwise direction, as viewed from aft of the test model. Figures show the overall cruise missile and propfan blade configurations. The objective of this test was to evaluate propfan performance and suitability as a viable propulsion option for next generation of cruise missiles. This paper details the concurrent computer aided design, engineering, and manufacturing of the carbon fiber/epoxy propfan blades as the NASA Lewis Research Center.

  12. A multi-criteria decision aid methodology to design electric vehicles public charging networks

    NASA Astrophysics Data System (ADS)

    Raposo, João; Rodrigues, Ana; Silva, Carlos; Dentinho, Tomaz

    2015-05-01

    This article presents a new multi-criteria decision aid methodology, dynamic-PROMETHEE, here used to design electric vehicle charging networks. In applying this methodology to a Portuguese city, results suggest that it is effective in designing electric vehicle charging networks, generating time and policy based scenarios, considering offer and demand and the city's urban structure. Dynamic-PROMETHE adds to the already known PROMETHEE's characteristics other useful features, such as decision memory over time, versatility and adaptability. The case study, used here to present the dynamic-PROMETHEE, served as inspiration and base to create this new methodology. It can be used to model different problems and scenarios that may present similar requirement characteristics.

  13. Effect of different adhesive strategies on microtensile bond strength of computer aided design/computer aided manufacturing blocks bonded to dentin

    PubMed Central

    Roperto, Renato; Akkus, Anna; Akkus, Ozan; Lang, Lisa; Sousa-Neto, Manoel Damiao; Teich, Sorin; Porto, Thiago Soares

    2016-01-01

    Background: The aim of this study was to determine the microtensile bond strength (μTBS) of ceramic and composite computer aided design-computer aided manufacturing (CAD-CAM) blocks bonded to dentin using different adhesive strategies. Materials and Methods: In this in vitro study, 30 crowns of sound freshly extracted human molars were sectioned horizontally 3 mm above the cementoenamel junction to produce flat dentin surfaces. Ceramic and composite CAD/CAM blocks, size 14, were sectioned into slices of 3 mm thick. Before bonding, CAD/CAM block surfaces were treated according to the manufacturer's instructions. Groups were created based on the adhesive strategy used: Group 1 (GI) - conventional resin cement + total-etch adhesive system, Group 2 (GII) - conventional resin cement + self-etch adhesive system, and Group 3 (GIII) - self-adhesive resin cement with no adhesive. Bonded specimens were stored in 100% humidity for 24h at 37΀C, and then sectioned with a slow-speed diamond saw to obtain 1 mm × 1 mm × 6 mm microsticks. Microtensile testing was then conducted using a microtensile tester. μTBS values were expressed in MPa and analyzed by one-way ANOVA with post hoc (Tukey) test at the 5% significance level. Results: Mean values and standard deviations of μTBS (MPa) were 17.68 (±2.71) for GI/ceramic; 17.62 (±3.99) for GI/composite; 13.61 (±6.92) for GII/composite; 12.22 (±4.24) for GII/ceramic; 7.47 (±2.29) for GIII/composite; and 6.48 (±3.10) for GIII/ceramic; ANOVA indicated significant differences among the adhesive modality and block interaction (P < 0.05), and no significant differences among blocks only, except between GI and GII/ceramic. Bond strength of GIII was consistently lower (P < 0.05) than GI and GII groups, regardless the block used. Conclusion: Cementation of CAD/CAM restorations, either composite or ceramic, can be significantly affected by different adhesive strategies used. PMID:27076825

  14. Design, analysis and test verification of advanced encapsulation systems

    NASA Technical Reports Server (NTRS)

    Garcia, A., III

    1982-01-01

    An analytical methodology for advanced encapsulation designs was developed. From these methods design sensitivities are established for the development of photovoltaic module criteria and the definition of needed research tasks. Analytical models were developed to perform optical, thermal, electrical and analyses on candidate encapsulation systems. From these analyses several candidate systems were selected for qualification testing. Additionally, test specimens of various types are constructed and tested to determine the validity of the analysis methodology developed. Identified deficiencies and/or discrepancies between analytical models and relevant test data are corrected. Prediction capability of analytical models is improved. Encapsulation engineering generalities, principles, and design aids for photovoltaic module designers is generated.

  15. Solar-heating and cooling system design package

    NASA Technical Reports Server (NTRS)

    1980-01-01

    Package of information includes design data, performance specifications, drawings, hazard analysis, and spare parts list for commercially produced system installed in single-family dwelling in Akron, Ohio. System uses air flat-plate collectors, 12000 kg rock storage and backup heat pump. Solar portion requires 0.7 kW, and provides 35% of average total heating load including hot water. Information aids persons considering installing solar home-heating systems.

  16. Support systems design and analysis

    NASA Technical Reports Server (NTRS)

    Ferguson, R. M.

    1985-01-01

    The integration of Kennedy Space Center (KSC) ground support systems with the new launch processing system and new launch vehicle provided KSC with a unique challenge in system design and analysis for the Space Transportation System. Approximately 70 support systems are controlled and monitored by the launch processing system. Typical systems are main propulsion oxygen and hydrogen loading systems, environmental control life support system, hydraulics, etc. An End-to-End concept of documentation and analysis was chosen and applied to these systems. Unique problems were resolved in the areas of software analysis, safing under emergency conditions, sampling rates, and control loop analysis. New methods of performing End-to-End reliability analyses were implemented. The systems design approach selected and the resolution of major problem areas are discussed.

  17. BAE systems brownout landing aid system technology (BLAST) system overview and flight test results

    NASA Astrophysics Data System (ADS)

    Sykora, Brian

    2012-06-01

    Rotary wing aircraft continue to experience mishaps caused by the loss of visual situational awareness and spatial disorientation due to brownout or whiteout in dusty, sandy or snowy conditions as the downwash of the rotor blades creates obscurant clouds that completely engulf the helicopter during approaches to land. BAE Systems has developed a "see-through" brownout landing aid system technology (BLAST) based on a small and light weight 94GHz radar with proven ability to penetrate dust, coupled with proprietary antenna tracking, signal processing and digital terrain morphing algorithms to produce a cognitive real-time 3D synthetic image of the ground and proximate surface hazards in and around the landing zone. A series of ground and flight tests have been conducted at the United States Army's Yuma Proving Ground in Arizona that reflect operational scenarios in relevant environments to progressively mature the technology. A description of the BLAST solution developed by BAE Systems and results from recent flight tests is provided.

  18. Laser bar code applied in computer aided design of power fittings

    NASA Astrophysics Data System (ADS)

    Yang, Xiaohong; Yang, Fan

    2010-10-01

    A computer aided process planning system is developed based on laser bar code technology to automatize and standardize processing-paper making. The system sorts fittings by analyzing their types, structures, dimensions, materials, and technics characteristics, groups and encodes the fittings with similar technology characteristics base on the theory of Group Technology (GT). The system produces standard technology procedures using integrative-parts method and stores them into technics databases. To work out the technology procedure of fittings, the only thing for users need to do is to scan the bar code of fittings with a laser code reader. The system can produce process-paper using decision trees method and then print the process-cards automatically. The software has already been applied in some power stations and is praised by the users.

  19. Design, analysis, and applications of cellular contact-aided compliant mechanisms

    NASA Astrophysics Data System (ADS)

    Mehta, Vipul

    A new class of compliant mechanisms utilizing the benefits of cellular geometry and contact are addressed in this work. The design, analysis, fabrication and testing of such structures for high-strain and high-strength applications is the focus of the present research. Cellular structures have relatively good strength-to-weight ratios. They also have a higher strain capability than solid structures. Contact during deformation reduces failure-causing bending stresses through stress relief, thereby enabling such cellular structures to be stretched more than the corresponding structures without contact. Both analytical and numerical models are developed to represent one specific mechanism. Several candidate materials are investigated for such mechanisms. Although the allowable strain of all these materials is small, the overall strain of the contact-aided cellular mechanisms is at least an order of magnitude greater than that of the constitutive material. Application of contact to different materials yields an improvement in the global strain capacity by more than 100% relative to cellular structures without contact. Experiments are conducted to validate the models, and good agreement is found. Size optimization is carried out to maximize the stress relief and the overall strain. Two main applications are considered in the present work. One application consists of a morphing aircraft skin for adaptive structures. Different material models such as linearly elastic and multi-linear elastic are examined. For linearly elastic materials, contact-induced stress-relief is advantageous and for nonlinear elastic materials, reduction of transverse deflection due to contact is useful. The proposed contact-aided skin structure is compared with a cellular skin without contact. The contact mechanism helps to increase the morphing capacity while decreasing the structural mass. Using contact-aided cellular mechanisms, the global strain capability is increased by as much as 37%. For a

  20. Tradeoff studies in multiobjective insensitive design of airplane control systems

    NASA Technical Reports Server (NTRS)

    Schy, A. A.; Giesy, D. P.

    1983-01-01

    A computer aided design method for multiobjective parameter-insensitive design of airplane control systems is described. Methods are presented for trading off nominal values of design objectives against sensitivities of the design objectives to parameter uncertainties, together with guidelines for designer utilization of the methods. The methods are illustrated by application to the design of a lateral stability augmentation system for two supersonic flight conditions of the Shuttle Orbiter. Objective functions are conventional handling quality measures and peak magnitudes of control deflections and rates. The uncertain parameters are assumed Gaussian, and numerical approximations of the stochastic behavior of the objectives are described. Results of applying the tradeoff methods to this example show that stochastic-insensitive designs are distinctly different from deterministic multiobjective designs. The main penalty for achieving significant decrease in sensitivity is decreased speed of response for the nominal system.