Science.gov

Sample records for aided design tcad

  1. Statistical analysis and yield management in LED design through TCAD device simulation

    NASA Astrophysics Data System (ADS)

    Létay, Gergö; Ng, Wei-Choon; Schneider, Lutz; Bregy, Adrian; Pfeiffer, Michael

    2007-02-01

    This paper illustrates how technology computer-aided design (TCAD), which nowadays is an essential part of CMOS technology, can be applied to LED development and manufacturing. In the first part, the essential electrical and optical models inherent to LED modeling are reviewed. The second part of the work describes a methodology to improve the efficiency of the simulation procedure by using the concept of process compact models (PCMs). The last part demonstrates the capabilities of PCMs using an example of a blue InGaN LED. In particular, a parameter screening is performed to find the most important parameters, an optimization task incorporating the robustness of the design is carried out, and finally the impact of manufacturing tolerances on yield is investigated. It is indicated how the concept of PCMs can contribute to an efficient design for manufacturing DFM-aware development.

  2. TCAD simulation of Low Gain Avalanche Detectors

    NASA Astrophysics Data System (ADS)

    Dalal, Ranjeet; Jain, Geetika; Bhardwaj, Ashutosh; Ranjan, Kirti

    2016-11-01

    In the present work, detailed simulation using Technology Computer Aided Design (TCAD) tool, Silvaco for non-irradiated and irradiated LGAD (Low Gain Avalanche Detector) devices has been carried out. The effects of different design parameters and proton irradiation on LGAD operation are discussed in detail. An already published effective two trap bulk damage model is used to simulate the radiation damage without implementing any acceptor removal term. The TCAD simulation for irradiated LGAD devices produce decreasing gain with increasing fluence, similar to the measurement results. The space charge density and electric field distribution are used to illustrate the possible reasons for the degradation of gain of the irradiated LGAD devices.

  3. The Future of Electronic Device Design: Device and Process Simulation Find Intelligence on the World Wide Web

    NASA Technical Reports Server (NTRS)

    Biegel, Bryan A.

    1999-01-01

    We are on the path to meet the major challenges ahead for TCAD (technology computer aided design). The emerging computational grid will ultimately solve the challenge of limited computational power. The Modular TCAD Framework will solve the TCAD software challenge once TCAD software developers realize that there is no other way to meet industry's needs. The modular TCAD framework (MTF) also provides the ideal platform for solving the TCAD model challenge by rapid implementation of models in a partial differential solver.

  4. Design and TCAD simulation of planar p-on-n active-edge pixel sensors for the next generation of FELs

    NASA Astrophysics Data System (ADS)

    Dalla Betta, G.-F.; Batignani, G.; Benkechkache, M. A.; Bettarini, S.; Casarosa, G.; Comotti, D.; Fabris, L.; Forti, F.; Grassi, M.; Latreche, S.; Lodola, L.; Malcovati, P.; Manghisoni, M.; Mendicino, R.; Morsani, F.; Paladino, A.; Pancheri, L.; Paoloni, E.; Ratti, L.; Re, V.; Rizzo, G.; Traversi, G.; Vacchi, C.; Verzellesi, G.; Xu, H.

    2016-07-01

    We report on the design and TCAD simulations of planar p-on-n sensors with active edge aimed at a four-side buttable X-ray detector module for future FEL applications. Edge terminations with different number of guard rings were designed to find the best trade-off between breakdown voltage and border gap size. The methodology of the sensor design, the optimization of the most relevant parameters to maximize the breakdown voltage and the final layout are described.

  5. Design and spectrum calculation of 4H-SiC thermal neutron detectors using FLUKA and TCAD

    NASA Astrophysics Data System (ADS)

    Huang, Haili; Tang, Xiaoyan; Guo, Hui; Zhang, Yimen; Zhang, Yimeng; Zhang, Yuming

    2016-10-01

    SiC is a promising material for neutron detection in a harsh environment due to its wide band gap, high displacement threshold energy and high thermal conductivity. To increase the detection efficiency of SiC, a converter such as 6LiF or 10B is introduced. In this paper, pulse-height spectra of a PIN diode with a 6LiF conversion layer exposed to thermal neutrons (0.026 eV) are calculated using TCAD and Monte Carlo simulations. First, the conversion efficiency of a thermal neutron with respect to the thickness of 6LiF was calculated by using a FLUKA code, and a maximal efficiency of approximately 5% was achieved. Next, the energy distributions of both 3H and α induced by the 6LiF reaction according to different ranges of emission angle are analyzed. Subsequently, transient pulses generated by the bombardment of single 3H or α-particles are calculated. Finally, pulse height spectra are obtained with a detector efficiency of 4.53%. Comparisons of the simulated result with the experimental data are also presented, and the calculated spectrum shows an acceptable similarity to the experimental data. This work would be useful for radiation-sensing applications, especially for SiC detector design.

  6. Designing State Aid Formulas

    ERIC Educational Resources Information Center

    Zhao, Bo; Bradbury, Katharine

    2009-01-01

    This paper designs a new equalization-aid formula based on fiscal gaps of local communities. When states are in transition to a new local aid formula, the issue of whether and how to hold existing aid harmless poses a challenge. The authors show that some previous studies and the formulas derived from them give differential weights to existing and…

  7. Measurements and TCAD simulation of novel ATLAS planar pixel detector structures for the HL-LHC upgrade

    NASA Astrophysics Data System (ADS)

    Nellist, C.; Dinu, N.; Gkougkousis, E.; Lounis, A.

    2015-06-01

    The LHC accelerator complex will be upgraded between 2020-2022, to the High-Luminosity-LHC, to considerably increase statistics for the various physics analyses. To operate under these challenging new conditions, and maintain excellent performance in track reconstruction and vertex location, the ATLAS pixel detector must be substantially upgraded and a full replacement is expected. Processing techniques for novel pixel designs are optimised through characterisation of test structures in a clean room and also through simulations with Technology Computer Aided Design (TCAD). A method to study non-perpendicular tracks through a pixel device is discussed. Comparison of TCAD simulations with Secondary Ion Mass Spectrometry (SIMS) measurements to investigate the doping profile of structures and validate the simulation process is also presented.

  8. A TCAD-based yield and reliability analysis for VCSELs

    NASA Astrophysics Data System (ADS)

    Odermatt, Stefan; Eitel, Sven; Hövel, Rainer; Letay, Gergoe; Witzigmann, Bernd

    2006-02-01

    Yield enhancement and reliability improvement are main requirements in todays industrial VCSEL manufacturing. This requires a thorough understanding of process tolerances and the effects resulting from design variations. So far, this has been done by statistical analysis of experimental data. In this work, we use a state-of-the art technology computer aided design (TCAD) tool to analyze device reliability and yield for multiple VCSEL designs. The starting point is a physics-based simulation model that is calibrated to temperature-dependent static and dynamic measurements for a set of single- and multi-mode VCSELs lasing at 850 nm. Applying statistical variations that result from design modifications and process fluctuations, yield and reliability data are extracted by means of simulation. The yield will be derived by compliance to selected device specifications (such available single-mode power), and the device reliability is determined from an analysis of the internal device properties. As example, the oxide aperture and metal aperture design will be discussed, and a robust design will be presented.

  9. Dynamic mesh for TCAD modeling with ECORCE

    NASA Astrophysics Data System (ADS)

    Michez, A.; Boch, J.; Touboul, A.; Saigné, F.

    2016-08-01

    Mesh generation for TCAD modeling is challenging. Because densities of carriers can change by several orders of magnitude in thin areas, a significant change of the solution can be observed for two very similar meshes. The mesh must be defined at best to minimize this change. To address this issue, a criterion based on polynomial interpolation on adjacent nodes is proposed that adjusts accurately the mesh to the gradients of Degrees of Freedom. Furthermore, a dynamic mesh that follows changes of DF in DC and transient mode is a powerful tool for TCAD users. But, in transient modeling, adding nodes to a mesh induces oscillations in the solution that appears as spikes at the current collected at the contacts. This paper proposes two schemes that solve this problem. Examples show that using these techniques, the dynamic mesh generator of the TCAD tool ECORCE handle semiconductors devices in DC and transient mode.

  10. Extraction of parasitic and channel resistance components in FinFETs using TCAD tools

    NASA Astrophysics Data System (ADS)

    Narayanan, Sudarshan; Banghart, Edmund; Zeitzoff, Peter; Korablev, Konstantin; Pandey, Shesh Mani; Gendron-Hansen, Amaury; Benistant, Francis

    2016-09-01

    A novel TCAD conductance integration method is presented to evaluate and extract the channel resistance as well as the three-dimensional (3D) parasitic resistance components in a FinFET device. It is shown that results with this method agree well with a well-known 3D analytical model and that the method accurately simulates the parasitic resistance of realistic 3D FinFETs. Furthermore, the method is shown to be an effective aid in designing FinFETs with minimized parasitic resistance. Finally, the method introduces a useful figure of merit (called βy) that quantifies precisely the amount of current spreading that occurs in each region of the device.

  11. Telerobotic workstation design aid

    NASA Technical Reports Server (NTRS)

    Corker, K.; Hudlicka, E.; Young, D.; Cramer, N.

    1989-01-01

    Telerobot systems are being developed to support a number of space mission applications. In low earth orbit, telerobots and teleoperated manipulators will be used in shuttle operations and space station construction/maintenance. Free flying telerobotic service vehicles will be used at low and geosynchronous orbital operations. Rovers and autonomous vehicles will be equipped with telerobotic devices in planetary exploration. In all of these systems, human operators will interact with the robot system at varied levels during the scheduled operations. The human operators may be in either orbital or ground-based control systems. To assure integrated system development and maximum utility across these systems, designers must be sensitive to the constraints and capabilities that the human brings to system operation and must be assisted in applying these human factors to system development. The simulation and analysis system is intended to serve the needs of system analysis/designers as an integrated workstation in support of telerobotic design.

  12. Computer aided flexible envelope designs

    NASA Technical Reports Server (NTRS)

    Resch, R. D.

    1975-01-01

    Computer aided design methods are presented for the design and construction of strong, lightweight structures which require complex and precise geometric definition. The first, flexible structures, is a unique system of modeling folded plate structures and space frames. It is possible to continuously vary the geometry of a space frame to produce large, clear spans with curvature. The second method deals with developable surfaces, where both folding and bending are explored with the observed constraint of available building materials, and what minimal distortion result in maximum design capability. Alternative inexpensive fabrication techniques are being developed to achieve computer defined enclosures which are extremely lightweight and mathematically highly precise.

  13. Aids to School Bus Design

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Navistar International Transportation Corporation, Chicago, IL, used three separate NASA-developed technologies in the design and testing of their 3000 Series Bus Chassis which was developed expressly for school bus applications. For structural analysis, they used the MSC/NASTRAN program which mathematically analyzes a design and predicts how it will hold up under stress. They also used the SPATE 9000 system for non-contact measurement of stress, load transfer mechanisms, detection of hidden flaws, and monitoring structural changes during fatigue testing. SPATE 9000 was based on infrared stress measurement technology developed by Langley Research Center. They also employed the Wyle Ride Quality Meter, which was developed by Langley to aid in passenger aircraft design by providing an accurate measurement of ride vibration and sound level. These numbers translate into a subjective discomfort level index. These technologies contribute to the company's 45-48 percent share of the school bus chassis market.

  14. Computer-aided system design

    NASA Technical Reports Server (NTRS)

    Walker, Carrie K.

    1991-01-01

    A technique has been developed for combining features of a systems architecture design and assessment tool and a software development tool. This technique reduces simulation development time and expands simulation detail. The Architecture Design and Assessment System (ADAS), developed at the Research Triangle Institute, is a set of computer-assisted engineering tools for the design and analysis of computer systems. The ADAS system is based on directed graph concepts and supports the synthesis and analysis of software algorithms mapped to candidate hardware implementations. Greater simulation detail is provided by the ADAS functional simulator. With the functional simulator, programs written in either Ada or C can be used to provide a detailed description of graph nodes. A Computer-Aided Software Engineering tool developed at the Charles Stark Draper Laboratory (CSDL CASE) automatically generates Ada or C code from engineering block diagram specifications designed with an interactive graphical interface. A technique to use the tools together has been developed, which further automates the design process.

  15. Hafnium transistor process design for neural interfacing.

    PubMed

    Parent, David W; Basham, Eric J

    2009-01-01

    A design methodology is presented that uses 1-D process simulations of Metal Insulator Semiconductor (MIS) structures to design the threshold voltage of hafnium oxide based transistors used for neural recording. The methodology is comprised of 1-D analytical equations for threshold voltage specification, and doping profiles, and 1-D MIS Technical Computer Aided Design (TCAD) to design a process to implement a specific threshold voltage, which minimized simulation time. The process was then verified with a 2-D process/electrical TCAD simulation. Hafnium oxide films (HfO) were grown and characterized for dielectric constant and fixed oxide charge for various annealing temperatures, two important design variables in threshold voltage design.

  16. EGRAM- ECHELLE SPECTROGRAPH DESIGN AID

    NASA Technical Reports Server (NTRS)

    Dantzler, A. A.

    1994-01-01

    EGRAM aids in the design of spectrographic systems that utilize an echelle-first order cross disperser combination. This optical combination causes a two dimensional echellogram to fall on a detector. EGRAM describes the echellogram with enough detail to allow the user to effectively judge the feasibility of the spectrograph's design. By iteratively altering system parameters, the desired echellogram can be achieved without making a physical model. EGRAM calculates system parameters which are accurate to the first order and compare favorably to results from ray tracing techniques. The spectrographic system modelled by EGRAM consists of an entrance aperture, collimator, echelle, cross dispersion grating, focusing options, and a detector. The system is assumed to be free of aberrations and the echelle, cross disperser, and detector should be planar. The EGRAM program is menu driven and has a HELP facility. The user is prompted for information such as minimum and maximum wavelengths, slit dimensions, ruling frequencies, detector geometry, and angle of incidence. EGRAM calculates the resolving power and range of order numbers covered by the echellogram. A numerical map is also produced. This tabulates the order number, slit bandpass, and high/middle/low wavelengths. EGRAM can also compute the centroid coordinates of a specific wavelength and order (or vice versa). EGRAM is written for interactive execution and is written in Microsoft BASIC A. It has been implemented on an IBM PC series computer operating under DOS. EGRAM was developed in 1985.

  17. Computer-aided antibody design

    PubMed Central

    Kuroda, Daisuke; Shirai, Hiroki; Jacobson, Matthew P.; Nakamura, Haruki

    2012-01-01

    Recent clinical trials using antibodies with low toxicity and high efficiency have raised expectations for the development of next-generation protein therapeutics. However, the process of obtaining therapeutic antibodies remains time consuming and empirical. This review summarizes recent progresses in the field of computer-aided antibody development mainly focusing on antibody modeling, which is divided essentially into two parts: (i) modeling the antigen-binding site, also called the complementarity determining regions (CDRs), and (ii) predicting the relative orientations of the variable heavy (VH) and light (VL) chains. Among the six CDR loops, the greatest challenge is predicting the conformation of CDR-H3, which is the most important in antigen recognition. Further computational methods could be used in drug development based on crystal structures or homology models, including antibody–antigen dockings and energy calculations with approximate potential functions. These methods should guide experimental studies to improve the affinities and physicochemical properties of antibodies. Finally, several successful examples of in silico structure-based antibody designs are reviewed. We also briefly review structure-based antigen or immunogen design, with application to rational vaccine development. PMID:22661385

  18. Computer Aided Design in Engineering Education.

    ERIC Educational Resources Information Center

    Gobin, R.

    1986-01-01

    Discusses the use of Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM) systems in an undergraduate engineering education program. Provides a rationale for CAD/CAM use in the already existing engineering program. Describes the methods used in choosing the systems, some initial results, and warnings for first-time users. (TW)

  19. TCAD simulation for alpha-particle spectroscopy using SIC Schottky diode.

    PubMed

    Das, Achintya; Duttagupta, Siddhartha P

    2015-12-01

    There is a growing requirement of alpha spectroscopy in the fields context of environmental radioactive contamination, nuclear waste management, site decommissioning and decontamination. Although silicon-based alpha-particle detection technology is mature, high leakage current, low displacement threshold and radiation hardness limits the operation of the detector in harsh environments. Silicon carbide (SiC) is considered to be excellent material for radiation detection application due to its high band gap, high displacement threshold and high thermal conductivity. In this report, an alpha-particle-induced electron-hole pair generation model for a reverse-biased n-type SiC Schottky diode has been proposed and verified using technology computer aided design (TCAD) simulations. First, the forward-biased I-V characteristics were studied to determine the diode ideality factor and compared with published experimental data. The ideality factor was found to be in the range of 1.4-1.7 for a corresponding temperature range of 300-500 K. Next, the energy-dependent, alpha-particle-induced EHP generation model parameters were optimised using transport of ions in matter (TRIM) simulation. Finally, the transient pulses generated due to alpha-particle bombardment were analysed for (1) different diode temperatures (300-500 K), (2) different incident alpha-particle energies (1-5 MeV), (3) different reverse bias voltages of the 4H-SiC-based Schottky diode (-50 to -250 V) and (4) different angles of incidence of the alpha particle (0°-70°).The above model can be extended to other (wide band-gap semiconductor) device technologies useful for radiation-sensing application.

  20. TCAD simulation for alpha-particle spectroscopy using SIC Schottky diode.

    PubMed

    Das, Achintya; Duttagupta, Siddhartha P

    2015-12-01

    There is a growing requirement of alpha spectroscopy in the fields context of environmental radioactive contamination, nuclear waste management, site decommissioning and decontamination. Although silicon-based alpha-particle detection technology is mature, high leakage current, low displacement threshold and radiation hardness limits the operation of the detector in harsh environments. Silicon carbide (SiC) is considered to be excellent material for radiation detection application due to its high band gap, high displacement threshold and high thermal conductivity. In this report, an alpha-particle-induced electron-hole pair generation model for a reverse-biased n-type SiC Schottky diode has been proposed and verified using technology computer aided design (TCAD) simulations. First, the forward-biased I-V characteristics were studied to determine the diode ideality factor and compared with published experimental data. The ideality factor was found to be in the range of 1.4-1.7 for a corresponding temperature range of 300-500 K. Next, the energy-dependent, alpha-particle-induced EHP generation model parameters were optimised using transport of ions in matter (TRIM) simulation. Finally, the transient pulses generated due to alpha-particle bombardment were analysed for (1) different diode temperatures (300-500 K), (2) different incident alpha-particle energies (1-5 MeV), (3) different reverse bias voltages of the 4H-SiC-based Schottky diode (-50 to -250 V) and (4) different angles of incidence of the alpha particle (0°-70°).The above model can be extended to other (wide band-gap semiconductor) device technologies useful for radiation-sensing application. PMID:25634901

  1. Photogrammetry and computer-aided piping design

    SciTech Connect

    Keneflick, J.F.; Chirillo, R.D.

    1985-02-18

    Three-dimensional measurements taken from photographs of a plant model can be digitized and linked with computer-aided piping design. This can short-cut the design and construction of new plants and expedite repair and retrofitting projects. Some designers bridge the gap between model and computer by digitizing from orthographic prints obtained via orthography or the laser scanning of model sections. Such valve or fitting then processed is described in this paper. The marriage of photogrammetry and computer-aided piping design can economically produce such numerical drawings.

  2. Uncertainty management in intelligent design aiding systems

    NASA Technical Reports Server (NTRS)

    Brown, Donald E.; Gabbert, Paula S.

    1988-01-01

    A novel approach to uncertainty management which is particularly effective in intelligent design aiding systems for large-scale systems is presented. The use of this approach in the materials handling system design domain is discussed. It is noted that, during any point in the design process, a point value can be obtained for the evaluation of feasible designs; however, the techniques described provide unique solutions for these point values using only the current information about the design environment.

  3. Aids in designing laboratory flumes

    USGS Publications Warehouse

    Williams, Garnett P.

    1971-01-01

    The upsurge of interest in our environment has caused research and instruction in the flow of water along open channels to become increasingly popular in universities and institutes. This, in turn, has brought a greater demand for properly-designed laboratory flumes. Whatever the reason for your interest, designing and building the flume will take a little preparation. You may choose a pattern exactly like a previous design, or you may follow the more time-consuming method of studying several existing flumes and combine the most desirable features of each.

  4. A rule based computer aided design system

    NASA Technical Reports Server (NTRS)

    Premack, T.

    1986-01-01

    A Computer Aided Design (CAD) system is presented which supports the iterative process of design, the dimensional continuity between mating parts, and the hierarchical structure of the parts in their assembled configuration. Prolog, an interactive logic programming language, is used to represent and interpret the data base. The solid geometry representing the parts is defined in parameterized form using the swept volume method. The system is demonstrated with a design of a spring piston.

  5. Simulation as an Aid to Experimental Design.

    ERIC Educational Resources Information Center

    Frazer, Jack W.; And Others

    1983-01-01

    Discusses simulation program to aid in the design of enzyme kinetic experimentation (includes sample runs). Concentration versus time profiles of any subset or all nine states of reactions can be displayed with/without simulated instrumental noise, allowing the user to estimate the practicality of any proposed experiment given known instrument…

  6. Computer Code Aids Design Of Wings

    NASA Technical Reports Server (NTRS)

    Carlson, Harry W.; Darden, Christine M.

    1993-01-01

    AERO2S computer code developed to aid design engineers in selection and evaluation of aerodynamically efficient wing/canard and wing/horizontal-tail configurations that includes simple hinged-flap systems. Code rapidly estimates longitudinal aerodynamic characteristics of conceptual airplane lifting-surface arrangements. Developed in FORTRAN V on CDC 6000 computer system, and ported to MS-DOS environment.

  7. Computer-Aided Design in Further Education.

    ERIC Educational Resources Information Center

    Ingham, Peter, Ed.

    This publication updates the 1982 occasional paper that was intended to foster staff awareness and assist colleges in Great Britain considering the use of computer-aided design (CAD) material in engineering courses. The paper begins by defining CAD and its place in the Integrated Business System with a brief discussion of the effect of CAD on the…

  8. Design and use of improved walking aids.

    PubMed

    Nava, L C; Laura, P A

    1985-10-01

    The design of crutches and walking sticks to assist the disabled has not varied much since their original conception, some 5000 years ago. From an engineering viewpoint one must consider crutches and walking sticks as dynamic mechanical systems which alleviate a disability; they may act as supports, help the user to recover from stumbling, or transmit from the arms, the energy required to lift the feet from the ground, an action not provided by artificial ankle joints. We describe some dynamic walking aids recently developed at the Instituto de Mecánica Aplicada, and discuss their design and our experience with their use. They are adjustable in height, shock absorbing and have non-slipping tips. Specially developed aids have been designed for children; they are versatile and their use has been made psychologically attractive.

  9. Geometric modeling for computer aided design

    NASA Technical Reports Server (NTRS)

    Schwing, James L.

    1992-01-01

    The goal was the design and implementation of software to be used in the conceptual design of aerospace vehicles. Several packages and design studies were completed, including two software tools currently used in the conceptual level design of aerospace vehicles. These tools are the Solid Modeling Aerospace Research Tool (SMART) and the Environment for Software Integration and Execution (EASIE). SMART provides conceptual designers with a rapid prototyping capability and additionally provides initial mass property analysis. EASIE provides a set of interactive utilities that simplify the task of building and executing computer aided design systems consisting of diverse, stand alone analysis codes that result in the streamlining of the exchange of data between programs, reducing errors and improving efficiency.

  10. Geometric modeling for computer aided design

    NASA Technical Reports Server (NTRS)

    Schwing, James L.

    1993-01-01

    Over the past several years, it has been the primary goal of this grant to design and implement software to be used in the conceptual design of aerospace vehicles. The work carried out under this grant was performed jointly with members of the Vehicle Analysis Branch (VAB) of NASA LaRC, Computer Sciences Corp., and Vigyan Corp. This has resulted in the development of several packages and design studies. Primary among these are the interactive geometric modeling tool, the Solid Modeling Aerospace Research Tool (smart), and the integration and execution tools provided by the Environment for Application Software Integration and Execution (EASIE). In addition, it is the purpose of the personnel of this grant to provide consultation in the areas of structural design, algorithm development, and software development and implementation, particularly in the areas of computer aided design, geometric surface representation, and parallel algorithms.

  11. Geometric modeling for computer aided design

    NASA Technical Reports Server (NTRS)

    Schwing, James L.; Olariu, Stephen

    1995-01-01

    The primary goal of this grant has been the design and implementation of software to be used in the conceptual design of aerospace vehicles particularly focused on the elements of geometric design, graphical user interfaces, and the interaction of the multitude of software typically used in this engineering environment. This has resulted in the development of several analysis packages and design studies. These include two major software systems currently used in the conceptual level design of aerospace vehicles. These tools are SMART, the Solid Modeling Aerospace Research Tool, and EASIE, the Environment for Software Integration and Execution. Additional software tools were designed and implemented to address the needs of the engineer working in the conceptual design environment. SMART provides conceptual designers with a rapid prototyping capability and several engineering analysis capabilities. In addition, SMART has a carefully engineered user interface that makes it easy to learn and use. Finally, a number of specialty characteristics have been built into SMART which allow it to be used efficiently as a front end geometry processor for other analysis packages. EASIE provides a set of interactive utilities that simplify the task of building and executing computer aided design systems consisting of diverse, stand-alone, analysis codes. Resulting in a streamlining of the exchange of data between programs reducing errors and improving the efficiency. EASIE provides both a methodology and a collection of software tools to ease the task of coordinating engineering design and analysis codes.

  12. Domain specific software design for decision aiding

    NASA Technical Reports Server (NTRS)

    Keller, Kirby; Stanley, Kevin

    1992-01-01

    McDonnell Aircraft Company (MCAIR) is involved in many large multi-discipline design and development efforts of tactical aircraft. These involve a number of design disciplines that must be coordinated to produce an integrated design and a successful product. Our interpretation of a domain specific software design (DSSD) is that of a representation or framework that is specialized to support a limited problem domain. A DSSD is an abstract software design that is shaped by the problem characteristics. This parallels the theme of object-oriented analysis and design of letting the problem model directly drive the design. The DSSD concept extends the notion of software reusability to include representations or frameworks. It supports the entire software life cycle and specifically leads to improved prototyping capability, supports system integration, and promotes reuse of software designs and supporting frameworks. The example presented in this paper is the task network architecture or design which was developed for the MCAIR Pilot's Associate program. The task network concept supported both module development and system integration within the domain of operator decision aiding. It is presented as an instance where a software design exhibited many of the attributes associated with DSSD concept.

  13. Integrated computer-aided design using minicomputers

    NASA Technical Reports Server (NTRS)

    Storaasli, O. O.

    1980-01-01

    Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM), a highly interactive software, has been implemented on minicomputers at the NASA Langley Research Center. CAD/CAM software integrates many formerly fragmented programs and procedures into one cohesive system; it also includes finite element modeling and analysis, and has been interfaced via a computer network to a relational data base management system and offline plotting devices on mainframe computers. The CAD/CAM software system requires interactive graphics terminals operating at a minimum of 4800 bits/sec transfer rate to a computer. The system is portable and introduces 'interactive graphics', which permits the creation and modification of models interactively. The CAD/CAM system has already produced designs for a large area space platform, a national transonic facility fan blade, and a laminar flow control wind tunnel model. Besides the design/drafting element analysis capability, CAD/CAM provides options to produce an automatic program tooling code to drive a numerically controlled (N/C) machine. Reductions in time for design, engineering, drawing, finite element modeling, and N/C machining will benefit productivity through reduced costs, fewer errors, and a wider range of configuration.

  14. Aspects on Transfer of Aided - Design Files

    NASA Astrophysics Data System (ADS)

    Goanta, A. M.; Anghelache, D. G.

    2016-08-01

    At this stage of development of hardware and software, each company that makes design software packages has a certain type of file created and customized in time to distinguish that company from its competitors. Thus today are widely known the DWG files belonging AutoCAD, IPT / IAM belonging to Inventor, PAR / ASM of Solid Edge's, PRT from the NX and so on. Behind every type of file there is a mathematical model which is common to more types of files. A specific aspect of the computer -aided design is that all softwares are working with both individual parts and assemblies, but their approach is different in that some use the same type of file both for each part and for the whole (PRT ), while others use different types of files (IPT / IAM, PAR / ASM, etc.). Another aspect of the computer -aided design is to transfer files between different companies which use different software packages or even the same software package but in different versions. Each of these situations generates distinct issues. Thus, to solve the partial reading by a project different from the native one, transfer files of STEP and IGES type are used

  15. Computer-aided software development process design

    NASA Technical Reports Server (NTRS)

    Lin, Chi Y.; Levary, Reuven R.

    1989-01-01

    The authors describe an intelligent tool designed to aid managers of software development projects in planning, managing, and controlling the development process of medium- to large-scale software projects. Its purpose is to reduce uncertainties in the budget, personnel, and schedule planning of software development projects. It is based on dynamic model for the software development and maintenance life-cycle process. This dynamic process is composed of a number of time-varying, interacting developmental phases, each characterized by its intended functions and requirements. System dynamics is used as a modeling methodology. The resulting Software LIfe-Cycle Simulator (SLICS) and the hybrid expert simulation system of which it is a subsystem are described.

  16. Computer-aided design and computer science technology

    NASA Technical Reports Server (NTRS)

    Fulton, R. E.; Voigt, S. J.

    1976-01-01

    A description is presented of computer-aided design requirements and the resulting computer science advances needed to support aerospace design. The aerospace design environment is examined, taking into account problems of data handling and aspects of computer hardware and software. The interactive terminal is normally the primary interface between the computer system and the engineering designer. Attention is given to user aids, interactive design, interactive computations, the characteristics of design information, data management requirements, hardware advancements, and computer science developments.

  17. Engineering Technology Programs Courses Guide for Computer Aided Design and Computer Aided Manufacturing.

    ERIC Educational Resources Information Center

    Georgia Univ., Athens. Div. of Vocational Education.

    This guide describes the requirements for courses in computer-aided design and computer-aided manufacturing (CAD/CAM) that are part of engineering technology programs conducted in vocational-technical schools in Georgia. The guide is organized in five sections. The first section provides a rationale for occupations in design and in production,…

  18. Computer-aided design for metabolic engineering.

    PubMed

    Fernández-Castané, Alfred; Fehér, Tamás; Carbonell, Pablo; Pauthenier, Cyrille; Faulon, Jean-Loup

    2014-12-20

    The development and application of biotechnology-based strategies has had a great socio-economical impact and is likely to play a crucial role in the foundation of more sustainable and efficient industrial processes. Within biotechnology, metabolic engineering aims at the directed improvement of cellular properties, often with the goal of synthesizing a target chemical compound. The use of computer-aided design (CAD) tools, along with the continuously emerging advanced genetic engineering techniques have allowed metabolic engineering to broaden and streamline the process of heterologous compound-production. In this work, we review the CAD tools available for metabolic engineering with an emphasis, on retrosynthesis methodologies. Recent advances in genetic engineering strategies for pathway implementation and optimization are also reviewed as well as a range of bionalytical tools to validate in silico predictions. A case study applying retrosynthesis is presented as an experimental verification of the output from Retropath, the first complete automated computational pipeline applicable to metabolic engineering. Applying this CAD pipeline, together with genetic reassembly and optimization of culture conditions led to improved production of the plant flavonoid pinocembrin. Coupling CAD tools with advanced genetic engineering strategies and bioprocess optimization is crucial for enhanced product yields and will be of great value for the development of non-natural products through sustainable biotechnological processes.

  19. Computer-aided design for metabolic engineering.

    PubMed

    Fernández-Castané, Alfred; Fehér, Tamás; Carbonell, Pablo; Pauthenier, Cyrille; Faulon, Jean-Loup

    2014-12-20

    The development and application of biotechnology-based strategies has had a great socio-economical impact and is likely to play a crucial role in the foundation of more sustainable and efficient industrial processes. Within biotechnology, metabolic engineering aims at the directed improvement of cellular properties, often with the goal of synthesizing a target chemical compound. The use of computer-aided design (CAD) tools, along with the continuously emerging advanced genetic engineering techniques have allowed metabolic engineering to broaden and streamline the process of heterologous compound-production. In this work, we review the CAD tools available for metabolic engineering with an emphasis, on retrosynthesis methodologies. Recent advances in genetic engineering strategies for pathway implementation and optimization are also reviewed as well as a range of bionalytical tools to validate in silico predictions. A case study applying retrosynthesis is presented as an experimental verification of the output from Retropath, the first complete automated computational pipeline applicable to metabolic engineering. Applying this CAD pipeline, together with genetic reassembly and optimization of culture conditions led to improved production of the plant flavonoid pinocembrin. Coupling CAD tools with advanced genetic engineering strategies and bioprocess optimization is crucial for enhanced product yields and will be of great value for the development of non-natural products through sustainable biotechnological processes. PMID:24704607

  20. Software For Computer-Aided Design Of Control Systems

    NASA Technical Reports Server (NTRS)

    Wette, Matthew

    1994-01-01

    Computer Aided Engineering System (CAESY) software developed to provide means to evaluate methods for dealing with users' needs in computer-aided design of control systems. Interpreter program for performing engineering calculations. Incorporates features of both Ada and MATLAB. Designed to be flexible and powerful. Includes internally defined functions, procedures and provides for definition of functions and procedures by user. Written in C language.

  1. Issues of a Computer-Aided Design of Hydraulic Jacks

    NASA Astrophysics Data System (ADS)

    Averchenkov, V. I.; Averchenkov, A. V.; Kolyakinand, V. V.; Orekhov, O. D.

    2016-04-01

    The article deals with the issues of a computer-aided design of hydraulic equipment, namely hydraulic jacks. Design principles of the hydraulic jack CAD system are described. In addition, the possibilities for the system improvement and expansion are considered.

  2. Computer-aided design development transition for IPAD environment

    NASA Technical Reports Server (NTRS)

    Owens, H. G.; Mock, W. D.; Mitchell, J. C.

    1980-01-01

    The relationship of federally sponsored computer-aided design/computer-aided manufacturing (CAD/CAM) programs to the aircraft life cycle design process, an overview of NAAD'S CAD development program, an evaluation of the CAD design process, a discussion of the current computing environment within which NAAD is developing its CAD system, some of the advantages/disadvantages of the NAAD-IPAD approach, and CAD developments during transition into the IPAD system are discussed.

  3. PLAID- A COMPUTER AIDED DESIGN SYSTEM

    NASA Technical Reports Server (NTRS)

    Brown, J. W.

    1994-01-01

    PLAID is a three-dimensional Computer Aided Design (CAD) system which enables the user to interactively construct, manipulate, and display sets of highly complex geometric models. PLAID was initially developed by NASA to assist in the design of Space Shuttle crewstation panels, and the detection of payload object collisions. It has evolved into a more general program for convenient use in many engineering applications. Special effort was made to incorporate CAD techniques and features which minimize the users workload in designing and managing PLAID models. PLAID consists of three major modules: the Primitive Object Generator (BUILD), the Composite Object Generator (COG), and the DISPLAY Processor. The BUILD module provides a means of constructing simple geometric objects called primitives. The primitives are created from polygons which are defined either explicitly by vertex coordinates, or graphically by use of terminal crosshairs or a digitizer. Solid objects are constructed by combining, rotating, or translating the polygons. Corner rounding, hole punching, milling, and contouring are special features available in BUILD. The COG module hierarchically organizes and manipulates primitives and other previously defined COG objects to form complex assemblies. The composite object is constructed by applying transformations to simpler objects. The transformations which can be applied are scalings, rotations, and translations. These transformations may be defined explicitly or defined graphically using the interactive COG commands. The DISPLAY module enables the user to view COG assemblies from arbitrary viewpoints (inside or outside the object) both in wireframe and hidden line renderings. The PLAID projection of a three-dimensional object can be either orthographic or with perspective. A conflict analysis option enables detection of spatial conflicts or collisions. DISPLAY provides camera functions to simulate a view of the model through different lenses. Other

  4. Critiquing the Computer-Aided Design of Dental Prostheses.

    ERIC Educational Resources Information Center

    Fitzpatrick, F. J.; And Others

    This paper describes RaPiD, a computer-aided assistant for the design of dental prostheses called removable partial dentures. The user manipulates icons directly to indicate the desired design solution to a given clinical situation. A developing design is represented as a logic database of components in a design; expert rules are applied as…

  5. Artwork Interactive Design System (AIDS) program description

    NASA Technical Reports Server (NTRS)

    Johnson, B. T.; Taylor, J. F.

    1976-01-01

    An artwork interactive design system is described which provides the microelectronic circuit designer/engineer a tool to perform circuit design, automatic layout modification, standard cell design, and artwork verification at a graphics computer terminal using a graphics tablet at the designer/computer interface.

  6. Computer-aided dispatching system design specification

    SciTech Connect

    Briggs, M.G.

    1997-12-16

    This document defines the performance requirements for a graphic display dispatching system to support Hanford Patrol Operations Center. This document reflects the as-built requirements for the system that was delivered by GTE Northwest, Inc. This system provided a commercial off-the-shelf computer-aided dispatching system and alarm monitoring system currently in operations at the Hanford Patrol Operations Center, Building 2721E. This system also provides alarm back-up capability for the Plutonium Finishing Plant (PFP).

  7. School District Uses Computer Aided Design and Drafting.

    ERIC Educational Resources Information Center

    Lorentz, Gordon S.

    1988-01-01

    Computer Aided Design and Drafting (CADD) programs are used to teach drafting at an Indiana high school. The school system's maintenance department shared use of the software and equipment to produce original drawings of school buildings. (MLF)

  8. Interactive graphical computer-aided design system

    NASA Technical Reports Server (NTRS)

    Edge, T. M.

    1975-01-01

    System is used for design, layout, and modification of large-scale-integrated (LSI) metal-oxide semiconductor (MOS) arrays. System is structured around small computer which provides real-time support for graphics storage display unit with keyboard, slave display unit, hard copy unit, and graphics tablet for designer/computer interface.

  9. Human factors of intelligent computer aided display design

    NASA Technical Reports Server (NTRS)

    Hunt, R. M.

    1985-01-01

    Design concepts for a decision support system being studied at NASA Langley as an aid to visual display unit (VDU) designers are described. Ideally, human factors should be taken into account by VDU designers. In reality, although the human factors database on VDUs is small, such systems must be constantly developed. Human factors are therefore a secondary consideration. An expert system will thus serve mainly in an advisory capacity. Functions can include facilitating the design process by shortening the time to generate and alter drawings, enhancing the capability of breaking design requirements down into simpler functions, and providing visual displays equivalent to the final product. The VDU system could also discriminate, and display the difference, between designer decisions and machine inferences. The system could also aid in analyzing the effects of designer choices on future options and in ennunciating when there are data available on a design selections.

  10. Computer-aided design of GPCR ligands.

    PubMed

    Gutiérrez-de-Terán, Hugo; Keränen, Henrik; Azuaje, Jhonny; Rodríguez, David; Åqvist, Johan; Sotelo, Eddy

    2015-01-01

    The recent availability of several GPCR crystal structures now contributes decisively to the perspective of structure-based ligand design. In this context, computational approaches are extremely helpful, particularly if properly integrated in drug design projects with cooperation between computational and medicinal chemistry teams. Here, we present the pipelines used in one such project, devoted to the design of novel potent and selective antagonists for the different adenosine receptors. The details of the computational strategies are described, and particular attention is given to explain how these procedures can effectively guide the synthesis of novel chemical entities.

  11. Program Aids Analysis And Optimization Of Design

    NASA Technical Reports Server (NTRS)

    Rogers, James L., Jr.; Lamarsh, William J., II

    1994-01-01

    NETS/ PROSSS (NETS Coupled With Programming System for Structural Synthesis) computer program developed to provide system for combining NETS (MSC-21588), neural-network application program and CONMIN (Constrained Function Minimization, ARC-10836), optimization program. Enables user to reach nearly optimal design. Design then used as starting point in normal optimization process, possibly enabling user to converge to optimal solution in significantly fewer iterations. NEWT/PROSSS written in C language and FORTRAN 77.

  12. Memory interface simulator: A computer design aid

    NASA Technical Reports Server (NTRS)

    Taylor, D. S.; Williams, T.; Weatherbee, J. E.

    1972-01-01

    Results are presented of a study conducted with a digital simulation model being used in the design of the Automatically Reconfigurable Modular Multiprocessor System (ARMMS), a candidate computer system for future manned and unmanned space missions. The model simulates the activity involved as instructions are fetched from random access memory for execution in one of the system central processing units. A series of model runs measured instruction execution time under various assumptions pertaining to the CPU's and the interface between the CPU's and RAM. Design tradeoffs are presented in the following areas: Bus widths, CPU microprogram read only memory cycle time, multiple instruction fetch, and instruction mix.

  13. Computer aided design study of hypermixing nozzles

    NASA Technical Reports Server (NTRS)

    Mefferd, L. A.; Bevilacqua, P. M.

    1979-01-01

    The development of a nozzle which combines the hypermixing and lobe mechanisms to achieve further increases in jet entrainment and ejector performance is investigated. A computer program which incorporates a two equation turbulence model and is used to predict and compare the evolution of jets from various nozzle designs is discussed. Increasing the length of the nozzle lobes and an alternating lobe nozzle are a methods examined for increasing the entrainment rate.

  14. Luminance in computer-aided lighting design

    SciTech Connect

    Ward, G.J.; Rubinstein, F.M.; Grynberg, A.

    1987-08-01

    Traditionally, the lighting engineering community has emphasized illuminance, the amount of light reaching a surface, as the primary design goal. The Illuminating Engineering Society (IES) provides tables of illuminances for different types of tasks which lighting engineers consult in designing lighting systems. Illuminance has proven to be a popular metric because it corresponds closely to the amount of energy needed to light a building as well as the initial cost of the lighting system. Perhaps more importantly, illuminance is easy to calculate, especially in simple unobstructed spaces with direct lighting. However,illuminance is not well correlated with visual performance, which is the real reason for installing a lighting system in the first place. Visual performance is a psychophysiological quantity that has been tied to physical quantities such as contrast, size and adaptation level by subject experiments. These physical quantities can be approximated from illuminance using a host of assumptions about the environment, or derived directly from the distribution of luminance. Luminance is the quantity of light traveling through a point in a certain direction, and it is this quantity that the eye actually sees''. However, the difficulty of calculating luminance for common tasks has made it an unpopular metric. Despite its importance to lighting design, luminance is rarely used because there is a lack of the necessary computational tools.In this paper, we will demonstrate a computer calculation of luminance that has significant advantages for lighting design. As well as providing an immediate evaluation of visual quality for task performance, less quantifiable factors such as aesthetics can be studied in synthetic images produced by the program.

  15. Luminance in computer-aided lighting design

    SciTech Connect

    Ward, G.J.; Rubinstein, F.M.; Grynberg, A.

    1987-08-01

    Traditionally, the lighting engineering community has emphasized illuminance, the amount of light reaching a surface, as the primary design goal. The Illuminating Engineering Society (IES) provides tables of illuminances for different types of tasks which lighting engineers consult in designing lighting systems. Illuminance has proven to be a popular metric because it corresponds closely to the amount of energy needed to light a building as well as the initial cost of the lighting system. Perhaps more importantly, illuminance is easy to calculate, especially in simple unobstructed spaces with direct lighting. However,illuminance is not well correlated with visual performance, which is the real reason for installing a lighting system in the first place. Visual performance is a psychophysiological quantity that has been tied to physical quantities such as contrast, size and adaptation level by subject experiments. These physical quantities can be approximated from illuminance using a host of assumptions about the environment, or derived directly from the distribution of luminance. Luminance is the quantity of light traveling through a point in a certain direction, and it is this quantity that the eye actually ``sees``. However, the difficulty of calculating luminance for common tasks has made it an unpopular metric. Despite its importance to lighting design, luminance is rarely used because there is a lack of the necessary computational tools.In this paper, we will demonstrate a computer calculation of luminance that has significant advantages for lighting design. As well as providing an immediate evaluation of visual quality for task performance, less quantifiable factors such as aesthetics can be studied in synthetic images produced by the program.

  16. Computer-Aided Design Of Sheet-Material Parts

    NASA Technical Reports Server (NTRS)

    Gilbert, Jeffrey L.; Paternoster, Vincent Y.; Levitt, Maureen L.; Osterloh, Mark R.

    1991-01-01

    Computer-aided-design system partly automates tedious process of designing and guiding assembly of small pieces of flat sheet material into large surfaces that approximate smoothly curved surfaces having complicated three-dimensional shapes. Capability provides for flexibility enabling designer to assess quickly and easily effects of changes in design in making engineering compromises among various sizes and shapes. Saves time and money in both design and fabrication. Used in rocket-engine application and other applications requiring design of sheet-material parts.

  17. National Occupational Skill Standards. CADD: Computer Aided Drafting and Design.

    ERIC Educational Resources Information Center

    National Coalition for Advanced Manufacturing, Washington, DC.

    This document identifies computer-aided drafting and design (CADD) skills that companies require of training programs and future employees. The information was developed by two committees of technically knowledgeable CADD users from across the United States and validated by several hundred other CADD users. The skills are aimed at a beginner CADD…

  18. Information technology aided exploration of system design spaces

    NASA Technical Reports Server (NTRS)

    Feather, Martin S.; Kiper, James D.; Kalafat, Selcuk

    2004-01-01

    We report on a practical application of information technology techniques to aid system engineers effectively explore large design spaces. We make use of heuristic search, visualization and data mining, the combination of which we have implemented wtihin a risk management tool in use at JPL and NASA.

  19. Computer-aided design of flight control systems

    NASA Technical Reports Server (NTRS)

    Stengel, Robert F.; Sircar, Subrata

    1991-01-01

    A computer program is presented for facilitating the development and assessment of flight control systems, and application to a control design is discussed. The program is a computer-aided control-system design program based on direct digital synthesis of a proportional-integral-filter controller with scheduled linear-quadratic-Gaussian gains and command generator tracking of pilot inputs. The FlightCAD system concentrates on aircraft dynamics, flight-control systems, stability and performance, and has practical engineering applications.

  20. SNL Mechanical Computer Aided Design (MCAD) guide 2007.

    SciTech Connect

    Moore, Brandon; Pollice, Stephanie L.; Martinez, Jack R.

    2007-12-01

    This document is considered a mechanical design best-practice guide to new and experienced designers alike. The contents consist of topics related to using Computer Aided Design (CAD) software, performing basic analyses, and using configuration management. The details specific to a particular topic have been leveraged against existing Product Realization Standard (PRS) and Technical Business Practice (TBP) requirements while maintaining alignment with sound engineering and design practices. This document is to be considered dynamic in that subsequent updates will be reflected in the main title, and each update will be published on an annual basis.

  1. The Computer Aided Aircraft-design Package (CAAP)

    NASA Technical Reports Server (NTRS)

    Yalif, Guy U.

    1994-01-01

    The preliminary design of an aircraft is a complex, labor-intensive, and creative process. Since the 1970's, many computer programs have been written to help automate preliminary airplane design. Time and resource analyses have identified, 'a substantial decrease in project duration with the introduction of an automated design capability'. Proof-of-concept studies have been completed which establish 'a foundation for a computer-based airframe design capability', Unfortunately, today's design codes exist in many different languages on many, often expensive, hardware platforms. Through the use of a module-based system architecture, the Computer aided Aircraft-design Package (CAAP) will eventually bring together many of the most useful features of existing programs. Through the use of an expert system, it will add an additional feature that could be described as indispensable to entry level engineers and students: the incorporation of 'expert' knowledge into the automated design process.

  2. Comments on the computer aided design of Stirling engines

    SciTech Connect

    Reader, G.T.; Taylor, D.R.

    1983-08-01

    For a number of years the research team at the Royal Naval Engineering College's Stirling Engine Research Facility (SERF) have been investigating the computer aided design of Stirling engines and these investigations have involved the study and review of existing analytical and computer techniques and the development of 'in-house' methods. In this paper these experiences are summarized against the background of the state-of-the-art in the field as represented by the existing literature. An attempt is made to delineate the various design and analytical methods available and to show that they all have their place in a fully integrated design package.

  3. Program Aids Design Of Fluid-Circulating Systems

    NASA Technical Reports Server (NTRS)

    Bacskay, Allen; Dalee, Robert

    1992-01-01

    Computer Aided Systems Engineering and Analysis (CASE/A) program is interactive software tool for trade study and analysis, designed to increase productivity during all phases of systems engineering. Graphics-based command-driven software package provides user-friendly computing environment in which engineer analyzes performance and interface characteristics of ECLS/ATC system. Useful during all phases of spacecraft-design program, from initial conceptual design trade studies to actual flight, including pre-flight prediction and in-flight analysis of anomalies. Written in FORTRAN 77.

  4. Computer-aided design of polymers and composites

    NASA Technical Reports Server (NTRS)

    Kaelble, D. H.

    1985-01-01

    This book on computer-aided design of polymers and composites introduces and discusses the subject from the viewpoint of atomic and molecular models. Thus, the origins of stiffness, strength, extensibility, and fracture toughness in composite materials can be analyzed directly in terms of chemical composition and molecular structure. Aspects of polymer composite reliability are considered along with characterization techniques for composite reliability, relations between atomic and molecular properties, computer aided design and manufacture, polymer CAD/CAM models, and composite CAD/CAM models. Attention is given to multiphase structural adhesives, fibrous composite reliability, metal joint reliability, polymer physical states and transitions, chemical quality assurance, processability testing, cure monitoring and management, nondestructive evaluation (NDE), surface NDE, elementary properties, ionic-covalent bonding, molecular analysis, acid-base interactions, the manufacturing science, and peel mechanics.

  5. Computer-aided design of antenna structures and components

    NASA Technical Reports Server (NTRS)

    Levy, R.

    1976-01-01

    This paper discusses computer-aided design procedures for antenna reflector structures and related components. The primary design aid is a computer program that establishes cross sectional sizes of the structural members by an optimality criterion. Alternative types of deflection-dependent objectives can be selected for designs subject to constraints on structure weight. The computer program has a special-purpose formulation to design structures of the type frequently used for antenna construction. These structures, in common with many in other areas of application, are represented by analytical models that employ only the three translational degrees of freedom at each node. The special-purpose construction of the program, however, permits coding and data management simplifications that provide advantages in problem size and execution speed. Size and speed are essentially governed by the requirements of structural analysis and are relatively unaffected by the added requirements of design. Computation times to execute several design/analysis cycles are comparable to the times required by general-purpose programs for a single analysis cycle. Examples in the paper illustrate effective design improvement for structures with several thousand degrees of freedom and within reasonable computing times.

  6. Computer-aided conceptual design of Air Cushion Vehicles

    NASA Astrophysics Data System (ADS)

    Band, E. G. U.; Lavis, D. R.

    This paper describes the development and use of a computer-aided design tool which has been used to explore preferred options for amphibious Air-Cushion Vehicle (ACV) and Surface-Effect Ship (SES) designs in support of U.S. Navy and U.S. Army programs. The tool, referred to as the ACV Design Synthesis Model (ADSM), is an interactive computer program which provides a description of feasible ACV or SES concepts that could be developed, by a competent design team, to perform the mission described by the input parameters. The paper discusses how the program was used to explore parametrically the design of a range of self-propelled hoverbarges to meet requirements of the U.S. Army Logistics Over the Shore (LOTS) phases of an amphibious landing. Examples of results are presented to illustrate the method used in determining design and performance trade-offs.

  7. Computer-Aided Design of a Sulfate Encapsulating Receptor

    SciTech Connect

    Custelcean, Radu; Bosano, Jerome J; Bonnesen, Peter V; Kertesz, Vilmos; Hay, Benjamin

    2009-01-01

    A promising new approach towards more efficient self-assembled cage receptors through computer-aided design is demonstrated. The resulting M{sub 4}L{sub 6} tetrahedral cage, internally functionalized with accurately positioned urea hydrogen-bonding groups (see structure; yellow: predicted, blue: experimental, space-filling: SO{sub 4}{sup 2-}), proved to be a remarkably strong sulfate receptor in water.

  8. The ethical design of an AIDS vaccine trial in Africa.

    PubMed

    Christakis, N A

    1988-01-01

    In 1987 in Zaire, a French investigator and a small group of Zairians were immunized with a French investigational AIDS vaccine. This action leads to questioning whether different sociocultural settings should have different research ethics applied, especially on pandemic diseases. Another question is to clarify the valid reasons for conducting an AIDS trial in Africa. The design of an AIDS vaccine trial should vary with the ethical and cultural factors of the research population involved, even if the epidemiological and scientific factors are the same worldwide. In Africa, study subjects meet the requirements for AIDS research: They are free from HIV infection and are at risk for the infection. However, concerns center on how to keep the subjects free from risks during the 6 months between HIV tests and how to ensure laboratory test accuracy. The applicability of the findings to that population are essential, although they may be unique to Africa. Research subjects must consent to participating in the trial and must be advised of their antibody status and of their becoming seropositive. To increase the beneficent treatment of subjects and decrease the risks, the study size should be increased and all participants should be counseled to avoid risky behaviors. A subject's family or social group may need to give consent in addition to the subject, because of cultural views. The explanation of the research must be in culturally relevant terms. Africa should have fair access to the vaccine resulting from the research. PMID:3397278

  9. The Design Manager's Aid for Intelligent Decomposition (DeMAID)

    NASA Technical Reports Server (NTRS)

    Rogers, James L.

    1994-01-01

    Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed, the proposed system can be decomposed to identify its hierarchical structure. The design manager's aid for intelligent decomposition (DeMAID) is a knowledge based system for ordering the sequence of modules and identifying a possible multilevel structure for design. Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save considerable money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined.

  10. Computer-aided structural design of a lunar radio telescope

    NASA Technical Reports Server (NTRS)

    Akgul, Ferhat; Gerstle, Walter H.; Johnson, Stewart W.

    1990-01-01

    This paper describes a computer-aided structural design of the main reflector of a fully steerable radio telescope to be located (in the 21st century) on the moon, and presents the results of the structural analysis of the reflector. The reflector is a paraboloid with a surface area of 12,660 sq m and a focal ratio of 0.42. The reflector's surface will be covered by a 5.08 cm-thick sandwich panel made of thin-walled aluminum cells filled with low-density foam. The low weight of the design will be achieved by using graphite-epoxy as the structural material.

  11. Three-Dimensional Computer Aided Design of a Vertical Winnower

    NASA Astrophysics Data System (ADS)

    Bao, Yumei; Lin, Saijia; Weng, Lijie

    The research states home and abroad of the winnowing technology and winnowers are reviewed in brief. For the air duct, the core component of the winnower, the relevant technical parameters in the winnowing process are calculated based on the winnowing principle. The three-dimensional computer aided design (3D-CAD) software Solidworks is applied. The designed vertical winnower is able to separate different raw materials by adjusting the air speed and has been put into practical production to separate the Chinese traditional medicine with high separating effect.

  12. Multidisciplinary Expert-aided Analysis and Design (MEAD)

    NASA Technical Reports Server (NTRS)

    Hummel, Thomas C.; Taylor, James

    1989-01-01

    The MEAD Computer Program (MCP) is being developed under the Multidisciplinary Expert-Aided Analysis and Design (MEAD) Project as a CAD environment in which integrated flight, propulsion, and structural control systems can be designed and analyzed. The MCP has several embedded computer-aided control engineering (CACE) packages, a user interface (UI), a supervisor, a data-base manager (DBM), and an expert system (ES). The supervisor monitors and coordinates the operation of the CACE packages, the DBM; the ES, and the UI. The DBM tracks the control design process. Models created or installed by the MCP are tracked by date and version, and results are associated with the specific model version with which they were generated. The ES is used to relieve the control engineer from tedious and cumbersome tasks in the iterative design process. The UI provides the capability for a novice as well as an expert to utilize the MCP easily and effectively. The MCP version 2(MCP-2.0) is fully developed for flight control system design and analysis. Propulsion system modeling, analysis, and simulation is also supported; the same is true for structural models represented in state-space form. The ultimate goal is to cover the integration of flight, propulsion, and structural control engineering, including all discipline-specific functionality and interfaces. The current MCP-2.0 components and functionality are discussed.

  13. Visions of visualization aids - Design philosophy and observations

    NASA Technical Reports Server (NTRS)

    Ellis, Stephen R.

    1989-01-01

    Aids for the visualization of high-dimensional scientific or other data must be designed. Simply casting multidimensional data into a two-dimensional or three-dimensional spatial metaphor does not guarantee that the presentation will provide insight or a parsimonious description of phenomena implicit in the data. Useful visualization, in contrast to glitzy, high-tech, computer-graphics imagery, is generally based on preexisting theoretical beliefs concerning the underlying phenomena. These beliefs guide selection and formatting of the plotted variables. Visualization tools are useful for understanding naturally three-dimensional data bases such as those used by pilots or astronauts. Two examples of such aids for spatial maneuvering illustrate that informative geometric distortion may be introduced to assist visualization and that visualization of complex dynamics alone may not be adequate to provide the necessary insight into the underlying processes.

  14. Viral sequence diversity: challenges for AIDS vaccine designs

    PubMed Central

    McBurney, Sean P; Ross, Ted M

    2009-01-01

    Among the greatest challenges facing AIDS vaccine development is the intrinsic diversity among circulating populations of HIV-1 in various geographical locations and the need to develop vaccines that can elicit enduring protective immunity to variant HIV-1 strains. While variation is observed in all of the viral proteins, the greatest diversity is localized to the viral envelope glycoproteins, evidently reflecting the predominant role of these proteins in eliciting host immune recognition and responses that result in progressive evolution of the envelope proteins during persistent infection. Interestingly, while envelope glycoprotein variation is widely assumed to be a major obstacle to AIDS vaccine development, there is very little experimental data in animal or human lentivirus systems addressing this critical issue. In this review, the state of vaccine development to address envelope diversity will be presented, focusing on the use of centralized and polyvalent sequence design as mechanisms to elicit broadly reactive immune responses. PMID:18980542

  15. Evolution of Geometric Sensitivity Derivatives from Computer Aided Design Models

    NASA Technical Reports Server (NTRS)

    Jones, William T.; Lazzara, David; Haimes, Robert

    2010-01-01

    The generation of design parameter sensitivity derivatives is required for gradient-based optimization. Such sensitivity derivatives are elusive at best when working with geometry defined within the solid modeling context of Computer-Aided Design (CAD) systems. Solid modeling CAD systems are often proprietary and always complex, thereby necessitating ad hoc procedures to infer parameter sensitivity. A new perspective is presented that makes direct use of the hierarchical associativity of CAD features to trace their evolution and thereby track design parameter sensitivity. In contrast to ad hoc methods, this method provides a more concise procedure following the model design intent and determining the sensitivity of CAD geometry directly to its respective defining parameters.

  16. The ergonomics of computer aided design within advanced manufacturing technology.

    PubMed

    John, P A

    1988-03-01

    Many manufacturing companies have now awakened to the significance of computer aided design (CAD), although the majority of them have only been able to purchase computerised draughting systems of which only a subset produce direct manufacturing data. Such companies are moving steadily towards the concept of computer integrated manufacture (CIM), and this demands CAD to address more than draughting. CAD architects are thus having to rethink the basic specification of such systems, although they typically suffer from an insufficient understanding of the design task and have consequently been working with inadequate specifications. It is at this fundamental level that ergonomics has much to offer, making its contribution by encouraging user-centred design. The discussion considers the relationships between CAD and: the design task; the organisation and people; creativity; and artificial intelligence. It finishes with a summary of the contribution of ergonomics.

  17. Microwave processing of a dental ceramic used in computer-aided design/computer-aided manufacturing.

    PubMed

    Pendola, Martin; Saha, Subrata

    2015-01-01

    Because of their favorable mechanical properties and natural esthetics, ceramics are widely used in restorative dentistry. The conventional ceramic sintering process required for their use is usually slow, however, and the equipment has an elevated energy consumption. Sintering processes that use microwaves have several advantages compared to regular sintering: shorter processing times, lower energy consumption, and the capacity for volumetric heating. The objective of this study was to test the mechanical properties of a dental ceramic used in computer-aided design/computer-aided manufacturing (CAD/CAM) after the specimens were processed with microwave hybrid sintering. Density, hardness, and bending strength were measured. When ceramic specimens were sintered with microwaves, the processing times were reduced and protocols were simplified. Hardness was improved almost 20% compared to regular sintering, and flexural strength measurements suggested that specimens were approximately 50% stronger than specimens sintered in a conventional system. Microwave hybrid sintering may preserve or improve the mechanical properties of dental ceramics designed for CAD/CAM processing systems, reducing processing and waiting times.

  18. Single-tooth dento-osseous osteotomy with a computer-aided design/computer-aided manufacturing surgical guide

    PubMed Central

    2016-01-01

    This clinical note introduces a method to assist surgeons in performing single-tooth dento-osseous osteotomy. For use in this method, a surgical guide was manufactured using computer-aided design/computer-aided manufacturing technology and was based on preoperative surgical simulation data. This method was highly conducive to successful single-tooth dento-osseous segmental osteotomy. PMID:27162756

  19. CAD/CAM (Computer Aided Design/Computer Aided Manufacture). A Brief Guide to Materials in the Library of Congress.

    ERIC Educational Resources Information Center

    Havas, George D.

    This brief guide to materials in the Library of Congress (LC) on computer aided design and/or computer aided manufacturing lists reference materials and other information sources under 13 headings: (1) brief introductions; (2) LC subject headings used for such materials; (3) textbooks; (4) additional titles; (5) glossaries and handbooks; (6)…

  20. A Conceptual Design of a Departure Planner Decision Aid

    NASA Technical Reports Server (NTRS)

    Anagnostakis, Ioannis; Idris, Husni R.; Clark, John-Paul; Feron, Eric; Hansman, R. John; Odoni, Amedeo R.; Hall, William D.

    2000-01-01

    Terminal area Air Traffic Management handles both arriving and departing traffic. To date, research work on terminal area operations has focused primarily on the arrival flow and typically departures are taken into account only in an approximate manner. However, arrivals and departures are highly coupled processes especially in the terminal airspace, with complex interactions and sharing of the same airport resources between arrivals and departures taking place in practically every important terminal area. Therefore, the addition of automation aids for departures, possibly in co-operation with existing arrival flow automation systems, could have a profound contribution in enhancing the overall efficiency of airport operations. This paper presents the conceptual system architecture for such an automation aid, the Departure Planner (DP). This architecture can be used as a core in the development of decision-aiding systems to assist air traffic controllers in improving the performance of departure operations and optimize runway time allocation among different operations at major congested airports. The design of such systems is expected to increase the overall efficiency of terminal area operations and yield benefits for all stakeholders involved in Air Traffic Management (ATM) operations, users as well as service providers.

  1. Visions of visualization aids: Design philosophy and experimental results

    NASA Technical Reports Server (NTRS)

    Ellis, Stephen R.

    1990-01-01

    Aids for the visualization of high-dimensional scientific or other data must be designed. Simply casting multidimensional data into a two- or three-dimensional spatial metaphor does not guarantee that the presentation will provide insight or parsimonious description of the phenomena underlying the data. Indeed, the communication of the essential meaning of some multidimensional data may be obscured by presentation in a spatially distributed format. Useful visualization is generally based on pre-existing theoretical beliefs concerning the underlying phenomena which guide selection and formatting of the plotted variables. Two examples from chaotic dynamics are used to illustrate how a visulaization may be an aid to insight. Two examples of displays to aid spatial maneuvering are described. The first, a perspective format for a commercial air traffic display, illustrates how geometric distortion may be introduced to insure that an operator can understand a depicted three-dimensional situation. The second, a display for planning small spacecraft maneuvers, illustrates how the complex counterintuitive character of orbital maneuvering may be made more tractable by removing higher-order nonlinear control dynamics, and allowing independent satisfaction of velocity and plume impingement constraints on orbital changes.

  2. CATIA - A computer aided design and manufacturing tridimensional system

    NASA Astrophysics Data System (ADS)

    Bernard, F.

    A properietary computer graphics-aided, three-dimensional interactive application (CATIA) design system is described. CATIA employs approximately 100 graphics displays, which are used by some 500 persons engaged in the definition of aircraft structures, structural strength analyses, the kinematic analysis of mobile elements, aerodynamic calculations, the choice of tooling in the machining of aircraft elements, and the programming of robotics. CATIA covers these diverse fields with a single data base. After a description of salient aspects of the system's hardware and software, graphics examples are given of the definition of curves, surfaces, complex volumes, and analytical tasks.

  3. Computer-aided design of bevel gear tooth surfaces

    NASA Technical Reports Server (NTRS)

    Shuo, Hung Chang; Huston, Ronald L.; Coy, John J.

    1989-01-01

    This paper presents a computer-aided design procedure for generating bevel gears. The development is based on examining a perfectly plastic, cone-shaped gear blank rolling over a cutting tooth on a plane crown rack. The resulting impression on the plastic gear blank is the envelope of the cutting tooth. This impression and envelope thus form a conjugate tooth surface. Equations are presented for the locus of points on the tooth surface. The same procedures are then extended to simulate the generation of a spiral bevel gear. The corresponding governing equations are presented.

  4. Computer aided design of bevel gear tooth surfaces

    NASA Technical Reports Server (NTRS)

    Chang, S. H.; Huston, R. L.; Coy, J. J.

    1989-01-01

    This paper presents a computer-aided design procedure for generating bevel gears. The development is based on examining a perfectly plastic, cone-shaped gear blank rolling over a cutting tooth on a plane crown rack. The resulting impression on the plastic gear blank is the envelope of the cutting tooth. This impression and envelope thus form a conjugate tooth surface. Equations are presented for the locus of points on the tooth surface. The same procedures are then extended to simulate the generation of a spiral bevel gear. The corresponding governing equations are presented.

  5. Computer aided design and analysis of gear tooth geometry

    NASA Technical Reports Server (NTRS)

    Chang, S. H.; Huston, R. L.

    1987-01-01

    A simulation method for gear hobbing and shaping of straight and spiral bevel gears is presented. The method is based upon an enveloping theory for gear tooth profile generation. The procedure is applicable in the computer aided design of standard and nonstandard tooth forms. An inverse procedure for finding a conjugate gear tooth profile is presented for arbitrary cutter geometry. The kinematic relations for the tooth surfaces of straight and spiral bevel gears are proposed. The tooth surface equations for these gears are formulated in a manner suitable for their automated numerical development and solution.

  6. Accelerating Battery Design Using Computer-Aided Engineering Tools: Preprint

    SciTech Connect

    Pesaran, A.; Heon, G. H.; Smith, K.

    2011-01-01

    Computer-aided engineering (CAE) is a proven pathway, especially in the automotive industry, to improve performance by resolving the relevant physics in complex systems, shortening the product development design cycle, thus reducing cost, and providing an efficient way to evaluate parameters for robust designs. Academic models include the relevant physics details, but neglect engineering complexities. Industry models include the relevant macroscopic geometry and system conditions, but simplify the fundamental physics too much. Most of the CAE battery tools for in-house use are custom model codes and require expert users. There is a need to make these battery modeling and design tools more accessible to end users such as battery developers, pack integrators, and vehicle makers. Developing integrated and physics-based CAE battery tools can reduce the design, build, test, break, re-design, re-build, and re-test cycle and help lower costs. NREL has been involved in developing various models to predict the thermal and electrochemical performance of large-format cells and has used in commercial three-dimensional finite-element analysis and computational fluid dynamics to study battery pack thermal issues. These NREL cell and pack design tools can be integrated to help support the automotive industry and to accelerate battery design.

  7. Advances in computer-aided design and computer-aided manufacture technology.

    PubMed

    Calamia, J R

    1996-01-01

    Although the development of computer-aided design (CAD) and computer-aided manufacture (CAM) technology and the benefits of increased productivity became obvious in the automobile and aerospace industries in the 1970s, investigations of this technology's application in the field of dentistry did not begin until the 1980s. Only now are we beginning to see the fruits of this work with the commercial availability of some systems; the potential for this technology seems boundless. This article reviews the recent literature with emphasis on the period from June 1992 to May 1993. This review should familiarize the reader with some of the latest developments in this technology, including a brief description of some systems currently available and the clinical and economical rationale for their acceptance into the dental mainstream. This article concentrates on a particular system, the Cerec (Siemens/Pelton and Crane, Charlotte, NC) system, for three reasons: First, this system has been available since 1985 and, as a result, has a track record of almost 7 years of data. Most of the data have just recently been released and consequently, much of this year's literature on CAD-CAM is monopolized by studies using this system. Second, this system was developed as a mobile, affordable, direct chairside CAD-CAM restorative method. As such, it is of special interest to the patient, providing a one-visit restoration. Third, the author is currently engaged in research using this particular system and has a working knowledge of this system's capabilities.

  8. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication.

    PubMed

    Bilgin, Mehmet Selim; Baytaroğlu, Ebru Nur; Erdem, Ali; Dilber, Erhan

    2016-01-01

    The aim of this review was to investigate usage of computer-aided design/computer-aided manufacture (CAD/CAM) such as milling and rapid prototyping (RP) technologies for removable denture fabrication. An electronic search was conducted in the PubMed/MEDLINE, ScienceDirect, Google Scholar, and Web of Science databases. Databases were searched from 1987 to 2014. The search was performed using a variety of keywords including CAD/CAM, complete/partial dentures, RP, rapid manufacturing, digitally designed, milled, computerized, and machined. The identified developments (in chronological order), techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication are summarized. Using a variety of keywords and aiming to find the topic, 78 publications were initially searched. For the main topic, the abstract of these 78 articles were scanned, and 52 publications were selected for reading in detail. Full-text of these articles was gained and searched in detail. Totally, 40 articles that discussed the techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication and the articles were incorporated in this review. Totally, 16 of the papers summarized in the table. Following review of all relevant publications, it can be concluded that current innovations and technological developments of CAD/CAM and RP allow the digitally planning and manufacturing of removable dentures from start to finish. As a result according to the literature review CAD/CAM techniques and supportive maxillomandibular relationship transfer devices are growing fast. In the close future, fabricating removable dentures will become medical informatics instead of needing a technical staff and procedures. However the methods have several limitations for now.

  9. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication.

    PubMed

    Bilgin, Mehmet Selim; Baytaroğlu, Ebru Nur; Erdem, Ali; Dilber, Erhan

    2016-01-01

    The aim of this review was to investigate usage of computer-aided design/computer-aided manufacture (CAD/CAM) such as milling and rapid prototyping (RP) technologies for removable denture fabrication. An electronic search was conducted in the PubMed/MEDLINE, ScienceDirect, Google Scholar, and Web of Science databases. Databases were searched from 1987 to 2014. The search was performed using a variety of keywords including CAD/CAM, complete/partial dentures, RP, rapid manufacturing, digitally designed, milled, computerized, and machined. The identified developments (in chronological order), techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication are summarized. Using a variety of keywords and aiming to find the topic, 78 publications were initially searched. For the main topic, the abstract of these 78 articles were scanned, and 52 publications were selected for reading in detail. Full-text of these articles was gained and searched in detail. Totally, 40 articles that discussed the techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication and the articles were incorporated in this review. Totally, 16 of the papers summarized in the table. Following review of all relevant publications, it can be concluded that current innovations and technological developments of CAD/CAM and RP allow the digitally planning and manufacturing of removable dentures from start to finish. As a result according to the literature review CAD/CAM techniques and supportive maxillomandibular relationship transfer devices are growing fast. In the close future, fabricating removable dentures will become medical informatics instead of needing a technical staff and procedures. However the methods have several limitations for now. PMID:27095912

  10. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication

    PubMed Central

    Bilgin, Mehmet Selim; Baytaroğlu, Ebru Nur; Erdem, Ali; Dilber, Erhan

    2016-01-01

    The aim of this review was to investigate usage of computer-aided design/computer-aided manufacture (CAD/CAM) such as milling and rapid prototyping (RP) technologies for removable denture fabrication. An electronic search was conducted in the PubMed/MEDLINE, ScienceDirect, Google Scholar, and Web of Science databases. Databases were searched from 1987 to 2014. The search was performed using a variety of keywords including CAD/CAM, complete/partial dentures, RP, rapid manufacturing, digitally designed, milled, computerized, and machined. The identified developments (in chronological order), techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication are summarized. Using a variety of keywords and aiming to find the topic, 78 publications were initially searched. For the main topic, the abstract of these 78 articles were scanned, and 52 publications were selected for reading in detail. Full-text of these articles was gained and searched in detail. Totally, 40 articles that discussed the techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication and the articles were incorporated in this review. Totally, 16 of the papers summarized in the table. Following review of all relevant publications, it can be concluded that current innovations and technological developments of CAD/CAM and RP allow the digitally planning and manufacturing of removable dentures from start to finish. As a result according to the literature review CAD/CAM techniques and supportive maxillomandibular relationship transfer devices are growing fast. In the close future, fabricating removable dentures will become medical informatics instead of needing a technical staff and procedures. However the methods have several limitations for now. PMID:27095912

  11. Computer aided design environment for the analysis and design of multi-body flexible structures

    NASA Technical Reports Server (NTRS)

    Ramakrishnan, Jayant V.; Singh, Ramen P.

    1989-01-01

    A computer aided design environment consisting of the programs NASTRAN, TREETOPS and MATLAB is presented in this paper. With links for data transfer between these programs, the integrated design of multi-body flexible structures is significantly enhanced. The CAD environment is used to model the Space Shuttle/Pinhole Occulater Facility. Then a controller is designed and evaluated in the nonlinear time history sense. Recent enhancements and ongoing research to add more capabilities are also described.

  12. The application of computer-aided technologies in automotive styling design

    NASA Astrophysics Data System (ADS)

    Zheng, Ze-feng; Zhang, Ji; Zheng, Ying

    2012-04-01

    In automotive industry, outline design is its life and creative design is its soul indeed. Computer-aided technology has been widely used in the automotive industry and more and more attention has been paid. This paper chiefly introduce the application of computer-aided technologies including CAD, CAM and CAE, analyses the process of automotive structural design and describe the development tendency of computer-aided design.

  13. A digital patient for computer-aided prosthesis design

    PubMed Central

    Colombo, Giorgio; Facoetti, Giancarlo; Rizzi, Caterina

    2013-01-01

    This article concerns the design of lower limb prosthesis, both below and above knee. It describes a new computer-based design framework and a digital model of the patient around which the prosthesis is designed and tested in a completely virtual environment. The virtual model of the patient is the backbone of the whole system, and it is based on a biomechanical general-purpose model customized with the patient's characteristics (e.g. anthropometric measures). The software platform adopts computer-aided and knowledge-guided approaches with the goal of replacing the current development process, mainly hand made, with a virtual one. It provides the prosthetics with a set of tools to design, configure and test the prosthesis and comprehends two main environments: the prosthesis modelling laboratory and the virtual testing laboratory. The first permits the three-dimensional model of the prosthesis to be configured and generated, while the second allows the prosthetics to virtually set up the artificial leg and simulate the patient's postures and movements, validating its functionality and configuration. General architecture and modelling/simulation tools for the platform are described as well as main aspects and results of the experimentation. PMID:24427528

  14. Advances in computer-aided design and computer-aided manufacture technology.

    PubMed

    Calamia, J R

    1994-01-01

    Although the development of computer-aided design (CAD) and computer-aided manufacture (CAM) technology and the benefits of increased productivity became obvious in the automobile and aerospace industries in the 1970s, investigations of this technology's application in the field of dentistry did not begin until the 1980s. Only now are we beginning to see the fruits of this work with the commercial availability of some systems; the potential for this technology seems boundless. This article reviews the recent literature with emphasis on the period from June 1992 to May 1993. This review should familiarize the reader with some of the latest developments in this technology, including a brief description of some systems currently available and the clinical and economical rationale for their acceptance into the dental mainstream. This article concentrates on a particular system, the Cerec (Siemens/Pelton and Crane, Charlotte, NC) system, for three reasons: first, this system has been available since 1985 and, as a result, has a track record of almost 7 years of data. Most of the data have just recently been released and consequently, much of this year's literature on CAD-CAM is monopolized by studies using this system. Second, this system was developed as a mobile, affordable, direct chairside CAD-CAM restorative method. As such, it is of special interest to the dentist who will offer this new technology directly to the patient, providing a one-visit restoration. Third, the author is currently engaged in research using this particular system and has a working knowledge of this system's capabilities.

  15. Computer aided microbial safety design of food processes.

    PubMed

    Schellekens, M; Martens, T; Roberts, T A; Mackey, B M; Nicolaï, B M; Van Impe, J F; De Baerdemaeker, J

    1994-12-01

    To reduce the time required for product development, to avoid expensive experimental tests, and to quantify safety risks for fresh products and the consequence of processing there is a growing interest in computer aided food process design. This paper discusses the application of hybrid object-oriented and rule-based expert system technology to represent the data and knowledge of microbial experts and food engineers. Finite element models for heat transfer calculation routines, microbial growth and inactivation models and texture kinetics are combined with food composition data, thermophysical properties, process steps and expert knowledge on type and quantity of microbial contamination. A prototype system has been developed to evaluate changes in food composition, process steps and process parameters on microbiological safety and textual quality of foods.

  16. From paper drawings to computer-aided design

    NASA Astrophysics Data System (ADS)

    Karima, M.; Sadhal, K. S.; McNeil, T. O.

    1985-02-01

    The benefits of a fully integrated computer-aided design and drafting system (CADDS) database are today very well accepted by industry, and major engineering companies implementing CADDS are confronted with the gigantic task of entering the existing multidisciplinary engineering information into the CADDS database. The present investigation is concerned with the findings of a feasibility study which had been conducted by a Canadian company to explore data capture on engineering drawings. A review of the state of the art in digitization is presented, and attention is given to specific problems arising in the case of the Canadian company. It is found that substantial advancements have been made toward the automatic 'reading' of existing drawings on paper media. However, no system exists currently which fully automates the data capturing process in the engineering environment and generates intelligent databases for use by CADD systems. Suitable approaches for 'data capture' under the given conditions are discussed.

  17. Visual display aid for orbital maneuvering - Design considerations

    NASA Technical Reports Server (NTRS)

    Grunwald, Arthur J.; Ellis, Stephen R.

    1993-01-01

    This paper describes the development of an interactive proximity operations planning system that allows on-site planning of fuel-efficient multiburn maneuvers in a potential multispacecraft environment. Although this display system most directly assists planning by providing visual feedback to aid visualization of the trajectories and constraints, its most significant features include: (1) the use of an 'inverse dynamics' algorithm that removes control nonlinearities facing the operator, and (2) a trajectory planning technique that separates, through a 'geometric spreadsheet', the normally coupled complex problems of planning orbital maneuvers and allows solution by an iterative sequence of simple independent actions. The visual feedback of trajectory shapes and operational constraints, provided by user-transparent and continuously active background computations, allows the operator to make fast, iterative design changes that rapidly converge to fuel-efficient solutions. The planning tool provides an example of operator-assisted optimization of nonlinear cost functions.

  18. Using a Latino Lens to Reimagine Aid Design and Delivery

    ERIC Educational Resources Information Center

    Santiago, Deborah A.

    2013-01-01

    Federal financial aid is critical to student access and success in postsecondary education for many students, including most Latinos. However, three current realities are challenging the effectiveness of federal financial aid policy today: (1) the inability of federal aid to keep pace with the increase in college costs for students; (2) the…

  19. Hardware synthesis from DDL. [Digital Design Language for computer aided design and test of LSI

    NASA Technical Reports Server (NTRS)

    Shah, A. M.; Shiva, S. G.

    1981-01-01

    The details of the digital systems can be conveniently input into the design automation system by means of Hardware Description Languages (HDL). The Computer Aided Design and Test (CADAT) system at NASA MSFC is used for the LSI design. The Digital Design Language (DDL) has been selected as HDL for the CADAT System. DDL translator output can be used for the hardware implementation of the digital design. This paper addresses problems of selecting the standard cells from the CADAT standard cell library to realize the logic implied by the DDL description of the system.

  20. Rubber airplane: Constraint-based component-modeling for knowledge representation in computer-aided conceptual design

    NASA Technical Reports Server (NTRS)

    Kolb, Mark A.

    1990-01-01

    Viewgraphs on Rubber Airplane: Constraint-based Component-Modeling for Knowledge Representation in Computer Aided Conceptual Design are presented. Topics covered include: computer aided design; object oriented programming; airfoil design; surveillance aircraft; commercial aircraft; aircraft design; and launch vehicles.

  1. Computer-Aided Drug Discovery and Design Targeting Ion Channels.

    PubMed

    Zhang, Qiansen; Gao, Zhaobing; Yang, Huaiyu

    2016-01-01

    Ion channels are widely expressed in living cells and play critical roles in various cellular biological functions. Dysfunctional ion channels can cause a variety of diseases, making ion channels attractive targets for drug discovery. Computational approaches, such as molecular docking and molecular dynamic simulations, provide economic and efficient tools for finding modulators of ion channels and for elucidating the action mechanisms of small molecules. In this review, we focus primarily on four types of ion channels (voltage-gated, ligand-gated, acid-sensing, and virus matrix 2 ion channels). The current advancements in computer-aided drug discovery and design targeting ion channels are summarized. First, ligand-based studies for drug design are briefly outlined. Then, we focus on the structurebased studies targeting pore domains, endogenous binding sites and allosteric sites of ion channels. Moreover, we also review the contribution of computational methods to the field of ligand binding and unbinding pathways of ion channels. Finally, we propose future developments for the field. PMID:26975507

  2. Molecular Similarity in Computer-Aided Molecular Design.

    NASA Astrophysics Data System (ADS)

    Hodgkin, Edward E.

    Available from UMI in association with The British Library. Requires signed TDF. The quantitative measurement of how similar one molecule is to another is investigated as a potential aid to molecular design. The work concentrates on the comparison of electronic properties of molecules, in particular electron density distribution, molecular electrostatic potential, molecular electric field and frontier orbital wavefunctions. A novel formula for molecular similarity has been devised and applied to these four properties. An approximate representation of valence electron density is used, based on the notion that charge distribution in a large molecule may be built from transferable contributions from its constituent functional groups. Each of these contributions consists of a series of first-order gaussian functions. The electrostatic potentials and electric fields used in the similarity calculations are computed from atom -centered partial charges. The frontier orbital wavefunction comparisons are performed using the extended Huckel method. The four measures of similarity are related to chemical and biological data and shown to have possible applications in the area of drug design.

  3. A critically appraised topic review of computer-aided design/computer-aided machining of removable partial denture frameworks.

    PubMed

    Lang, Lisa A; Tulunoglu, Ibrahim

    2014-01-01

    A critically appraised topic (CAT) review is presented about the use of computer-aided design (CAD)/computer-aided machining (CAM) removable partial denture (RPD) frameworks. A systematic search of the literature supporting CAD/CAM RPD systems revealed no randomized clinical trials, hence the CAT review was performed. A PubMed search yielded 9 articles meeting the inclusion criteria. Each article was characterized by study design and level of evidence. No clinical outcomes research has been published on the use of CAD/CAM RPDs. Low levels of evidence were found in the available literature. Clinical research studies are needed to determine the efficacy of this treatment modality.

  4. Perceptions of the Design of Voice Output Communication Aids

    ERIC Educational Resources Information Center

    Judge, Simon; Townend, Gillian

    2013-01-01

    Background: Voice output communication aids (VOCAs) are a key form of aided communication within the field of augmentative and alternative communication (AAC). In recent years, rapid developments in technology have resulted in an explosion of devices available commercially, yet little research has been conducted into what people who use VOCAs…

  5. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (SUN VERSION)

    NASA Technical Reports Server (NTRS)

    Rogers, J. L.

    1994-01-01

    Many engineering systems are large and multi-disciplinary. Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed the proposed system can be decomposed to identify its hierarchical structure. DeMAID (A Design Manager's Aid for Intelligent Decomposition) is a knowledge-based system for ordering the sequence of modules and identifying a possible multilevel structure for the design problem. DeMAID displays the modules in an N x N matrix format (called a design structure matrix) where a module is any process that requires input and generates an output. (Modules which generate an output but do not require an input, such as an initialization process, are also acceptable.) Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save a considerable amount of money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined. The decomposition of a complex design system into subsystems requires the judgement of the design manager. DeMAID reorders and groups the modules based on the links (interactions) among the modules, helping the design manager make decomposition decisions early in the design cycle. The modules are grouped into circuits (the subsystems) and displayed in an N x N matrix format. Feedback links, which indicate an iterative process, are minimized and only occur within a subsystem. Since there are no feedback links among the circuits, the circuits can be displayed in a multilevel format. Thus, a large amount of information is reduced to one or two displays which are stored for later retrieval and modification. The design manager and leaders of the design teams then have a visual display of the design problem and the intricate interactions among the different modules. The design manager could save a substantial

  6. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (MACINTOSH VERSION)

    NASA Technical Reports Server (NTRS)

    Rogers, J. L.

    1994-01-01

    Many engineering systems are large and multi-disciplinary. Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed the proposed system can be decomposed to identify its hierarchical structure. DeMAID (A Design Manager's Aid for Intelligent Decomposition) is a knowledge-based system for ordering the sequence of modules and identifying a possible multilevel structure for the design problem. DeMAID displays the modules in an N x N matrix format (called a design structure matrix) where a module is any process that requires input and generates an output. (Modules which generate an output but do not require an input, such as an initialization process, are also acceptable.) Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save a considerable amount of money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined. The decomposition of a complex design system into subsystems requires the judgement of the design manager. DeMAID reorders and groups the modules based on the links (interactions) among the modules, helping the design manager make decomposition decisions early in the design cycle. The modules are grouped into circuits (the subsystems) and displayed in an N x N matrix format. Feedback links, which indicate an iterative process, are minimized and only occur within a subsystem. Since there are no feedback links among the circuits, the circuits can be displayed in a multilevel format. Thus, a large amount of information is reduced to one or two displays which are stored for later retrieval and modification. The design manager and leaders of the design teams then have a visual display of the design problem and the intricate interactions among the different modules. The design manager could save a substantial

  7. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (SUN VERSION)

    NASA Technical Reports Server (NTRS)

    Rogers, J. L.

    1994-01-01

    Many engineering systems are large and multi-disciplinary. Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed the proposed system can be decomposed to identify its hierarchical structure. DeMAID (A Design Manager's Aid for Intelligent Decomposition) is a knowledge-based system for ordering the sequence of modules and identifying a possible multilevel structure for the design problem. DeMAID displays the modules in an N x N matrix format (called a design structure matrix) where a module is any process that requires input and generates an output. (Modules which generate an output but do not require an input, such as an initialization process, are also acceptable.) Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save a considerable amount of money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined. The decomposition of a complex design system into subsystems requires the judgement of the design manager. DeMAID reorders and groups the modules based on the links (interactions) among the modules, helping the design manager make decomposition decisions early in the design cycle. The modules are grouped into circuits (the subsystems) and displayed in an N x N matrix format. Feedback links, which indicate an iterative process, are minimized and only occur within a subsystem. Since there are no feedback links among the circuits, the circuits can be displayed in a multilevel format. Thus, a large amount of information is reduced to one or two displays which are stored for later retrieval and modification. The design manager and leaders of the design teams then have a visual display of the design problem and the intricate interactions among the different modules. The design manager could save a substantial

  8. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (MACINTOSH VERSION)

    NASA Technical Reports Server (NTRS)

    Rogers, J. L.

    1994-01-01

    Many engineering systems are large and multi-disciplinary. Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed the proposed system can be decomposed to identify its hierarchical structure. DeMAID (A Design Manager's Aid for Intelligent Decomposition) is a knowledge-based system for ordering the sequence of modules and identifying a possible multilevel structure for the design problem. DeMAID displays the modules in an N x N matrix format (called a design structure matrix) where a module is any process that requires input and generates an output. (Modules which generate an output but do not require an input, such as an initialization process, are also acceptable.) Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save a considerable amount of money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined. The decomposition of a complex design system into subsystems requires the judgement of the design manager. DeMAID reorders and groups the modules based on the links (interactions) among the modules, helping the design manager make decomposition decisions early in the design cycle. The modules are grouped into circuits (the subsystems) and displayed in an N x N matrix format. Feedback links, which indicate an iterative process, are minimized and only occur within a subsystem. Since there are no feedback links among the circuits, the circuits can be displayed in a multilevel format. Thus, a large amount of information is reduced to one or two displays which are stored for later retrieval and modification. The design manager and leaders of the design teams then have a visual display of the design problem and the intricate interactions among the different modules. The design manager could save a substantial

  9. 33 CFR 66.05-10 - State waters for private aids to navigation; designations; revisions, and revocations.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false State waters for private aids to... Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-10 State waters for private aids to navigation; designations; revisions,...

  10. 33 CFR 66.05-10 - State waters for private aids to navigation; designations; revisions, and revocations.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 1 2012-07-01 2012-07-01 false State waters for private aids to... Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-10 State waters for private aids to navigation; designations; revisions,...

  11. 33 CFR 66.05-10 - State waters for private aids to navigation; designations; revisions, and revocations.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false State waters for private aids to... Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-10 State waters for private aids to navigation; designations; revisions,...

  12. 33 CFR 66.05-100 - Designation of navigable waters as State waters for private aids to navigation.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... as State waters for private aids to navigation. 66.05-100 Section 66.05-100 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-100 Designation of navigable waters as State waters for private aids...

  13. 33 CFR 66.05-100 - Designation of navigable waters as State waters for private aids to navigation.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... as State waters for private aids to navigation. 66.05-100 Section 66.05-100 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-100 Designation of navigable waters as State waters for private aids...

  14. 33 CFR 66.05-10 - State waters for private aids to navigation; designations; revisions, and revocations.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 1 2014-07-01 2014-07-01 false State waters for private aids to... Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-10 State waters for private aids to navigation; designations; revisions,...

  15. 33 CFR 66.05-100 - Designation of navigable waters as State waters for private aids to navigation.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... as State waters for private aids to navigation. 66.05-100 Section 66.05-100 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-100 Designation of navigable waters as State waters for private aids...

  16. 33 CFR 66.05-100 - Designation of navigable waters as State waters for private aids to navigation.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... as State waters for private aids to navigation. 66.05-100 Section 66.05-100 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-100 Designation of navigable waters as State waters for private aids...

  17. 33 CFR 66.05-100 - Designation of navigable waters as State waters for private aids to navigation.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... as State waters for private aids to navigation. 66.05-100 Section 66.05-100 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-100 Designation of navigable waters as State waters for private aids...

  18. 33 CFR 66.05-10 - State waters for private aids to navigation; designations; revisions, and revocations.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false State waters for private aids to... Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION PRIVATE AIDS TO NAVIGATION State Aids to Navigation § 66.05-10 State waters for private aids to navigation; designations; revisions,...

  19. Computer Aided Design: Instructional Manual. The North Dakota High Technology Mobile Laboratory Project.

    ERIC Educational Resources Information Center

    Cheng, Wan-Lee

    This instructional manual contains 12 learning activity packets for use in a workshop in computer-aided design and drafting (CADD). The lessons cover the following topics: introduction to computer graphics and computer-aided design/drafting; coordinate systems; advance space graphics hardware configuration and basic features of the IBM PC…

  20. Definition of Design Case Similarity Based on Physical Quantities and Terms for Engineering Design Aid

    NASA Astrophysics Data System (ADS)

    Murakami, Tamotsu; Shimamura, Jun; Nakajima, Naomasa

    This paper proposes computerized methods of case-based design aid using similarity and relevance between design cases. First, we introduce methods of describing and recording design cases and design modification cases by physical quantities and their calculations to represent physical phenomena and terms to explain them. Then, we introduce a quantity dimension space defined by nine fundamental and supplementary quantities in SI. In quantity dimension space, a distance between physical quantities is mathematically defined based on city-block distance, and then physical quantity similarity by dimension is defined using the physical quantity distance. Then, similarity between physical quantities is defined by combining the similarity by dimension and similarity of quantity calculation structures. Also, similarity between terms is defined by combining literal similarity and cooccurrence statistics. Finally, similarity between design (modification) cases is defined based on physical quantity similarity and term similarity. By using design case similarity, designers can retrieve and consult the similar or relevant cases to a new design problem in a design case library. Also, design modification knowledge such as “which physical quantity or design parameter should be modified to solve specific trouble” can be extracted by analyzing recorded design modification cases and clustering them using design (modification) case similarity. The proposed methods are implemented as a Lisp program and are examined through some examples.

  1. PUZZLE - A program for computer-aided design of printed circuit artwork

    NASA Technical Reports Server (NTRS)

    Harrell, D. A. W.; Zane, R.

    1971-01-01

    Program assists in solving spacing problems encountered in printed circuit /PC/ design. It is intended to have maximum use for two-sided PC boards carrying integrated circuits, and also aids design of discrete component circuits.

  2. Improving radiation survey data using CADD/CAE (computer-aided design and drafting computer-aided engineering)

    SciTech Connect

    Palau, G.L.; Tarpinian, J.E.

    1987-01-01

    A new application of computer-aided design and drafting (CADD) and computer-aided engineering (CAE) at the Three Mile Island Unit 2 (TMI-2) cleanup is improving the quality of radiation survey data taken in the plant. The use of CADD/CAE-generated survey maps has increased both the accuracy of survey data and the capability to perform analyses with these data. In addition, health physics technician manhours and radiation exposure can be reduced in situations where the CADD/CAE-generated drawings are used for survey mapping.

  3. Designing and Implementing an Educational Program on AIDS for Minority Childbearing Women To Enhance AIDS Awareness.

    ERIC Educational Resources Information Center

    Nimphius, Gail M.

    Ignorance, misinformation, and a failure to personalize the risk for acquisition of the Acquired Immune Deficiency Syndrome (AIDS) virus has created a situation in which the incidence of Human Immunodeficiency Virus (HIV) seroprevalence among minority childbearing women in a Florida county is increasing. An increased incidence in this population…

  4. DeMAID/GA USER'S GUIDE Design Manager's Aid for Intelligent Decomposition with a Genetic Algorithm

    NASA Technical Reports Server (NTRS)

    Rogers, James L.

    1996-01-01

    Many companies are looking for new tools and techniques to aid a design manager in making decisions that can reduce the time and cost of a design cycle. One tool that is available to aid in this decision making process is the Design Manager's Aid for Intelligent Decomposition (DeMAID). Since the initial release of DEMAID in 1989, numerous enhancements have been added to aid the design manager in saving both cost and time in a design cycle. The key enhancement is a genetic algorithm (GA) and the enhanced version is called DeMAID/GA. The GA orders the sequence of design processes to minimize the cost and time to converge to a solution. These enhancements as well as the existing features of the original version of DEMAID are described. Two sample problems are used to show how these enhancements can be applied to improve the design cycle. This report serves as a user's guide for DeMAID/GA.

  5. Enhancing Engineering Computer-Aided Design Education Using Lectures Recorded on the PC

    ERIC Educational Resources Information Center

    McGrann, Roy T. R.

    2006-01-01

    Computer-Aided Engineering (CAE) is a course that is required during the third year in the mechanical engineering curriculum at Binghamton University. The primary objective of the course is to educate students in the procedures of computer-aided engineering design. The solid modeling and analysis program Pro/Engineer[TM] (PTC[R]) is used as the…

  6. Teaching Computer-Aided Design of Fluid Flow and Heat Transfer Engineering Equipment.

    ERIC Educational Resources Information Center

    Gosman, A. D.; And Others

    1979-01-01

    Describes a teaching program for fluid mechanics and heat transfer which contains both computer aided learning (CAL) and computer aided design (CAD) components and argues that the understanding of the physical and numerical modeling taught in the CAL course is essential to the proper implementation of CAD. (Author/CMV)

  7. Office of Student Financial Aid Quality Improvement Program: Design and Implementation Plan.

    ERIC Educational Resources Information Center

    Advanced Technology, Inc., Reston, VA.

    The purpose and direction of the quality improvement program of the U.S. Department of Education's Office of Student Financial Aid (OSFA) are described. The improvement program was designed to develop a systematic approach to identify, measure, and correct errors in the student aid delivery system. Information is provided on the general approach…

  8. Computer-Aided Design and Computer-Aided Manufacturing Hydroxyapatite/Epoxide Acrylate Maleic Compound Construction for Craniomaxillofacial Bone Defects.

    PubMed

    Zhang, Lei; Shen, Shunyao; Yu, Hongbo; Shen, Steve Guofang; Wang, Xudong

    2015-07-01

    The aim of this study was to investigate the use of computer-aided design and computer-aided manufacturing hydroxyapatite (HA)/epoxide acrylate maleic (EAM) compound construction artificial implants for craniomaxillofacial bone defects. Computed tomography, computer-aided design/computer-aided manufacturing and three-dimensional reconstruction, as well as rapid prototyping were performed in 12 patients between 2008 and 2013. The customized HA/EAM compound artificial implants were manufactured through selective laser sintering using a rapid prototyping machine into the exact geometric shapes of the defect. The HA/EAM compound artificial implants were then implanted during surgical reconstruction. Color-coded superimpositions demonstrated the discrepancy between the virtual plan and achieved results using Geomagic Studio. As a result, the HA/EAM compound artificial bone implants were perfectly matched with the facial areas that needed reconstruction. The postoperative aesthetic and functional results were satisfactory. The color-coded superimpositions demonstrated good consistency between the virtual plan and achieved results. The three-dimensional maximum deviation is 2.12 ± 0.65  mm and the three-dimensional mean deviation is 0.27 ± 0.07  mm. No facial nerve weakness or pain was observed at the follow-up examinations. Only 1 implant had to be removed 2 months after the surgery owing to severe local infection. No other complication was noted during the follow-up period. In conclusion, computer-aided, individually fabricated HA/EAM compound construction artificial implant was a good craniomaxillofacial surgical technique that yielded improved aesthetic results and functional recovery after reconstruction.

  9. The management of endodontically treated teeth using a Computer-Aided Design and Computer-Assisted Manufacturing/Computer-Aided Design and Computer-Integrated Manufacturing system.

    PubMed

    Foerster, J G; von Gonten, A S; Robert, G H

    1999-01-01

    This article introduces a new approach for restoring endodontically treated posterior teeth. Significantly reduced natural tooth structure often remains not only because of previous restorative measures but also because of endodontic procedures. Cast restorations for these teeth are almost universally recommended. The exception to this is the rare instance in which only conservative endodontic access openings exist in teeth presenting with no former existing restorations. Typically, multiple clinical appointments are required to complete the final cast restoration. This article presents Computer-Aided Design and Computer-Assisted Manufacturing/Computer-Aided Design and Computer-Integrated Manufacturing applications for restorative dentistry that provide the necessary care in an expeditious manner.

  10. Predictable Restorative Work Flow for Computer-Aided Design/Computer-Aided Manufacture-Fabricated Ceramic Veneers Utilizing a Virtual Smile Design Principle.

    PubMed

    Lin, W S; Zandinejad, A; Metz, M J; Harris, B T; Morton, D

    2015-01-01

    The purpose of this case report was to present the use of a contemporary digital photograph-assisted virtual smile design principle, an intraoral digital impression, and computer-aided design/computer-aided manufacture-fabricated lithium disilicate ceramic veneers to treat a patient with esthetic needs in the maxillary anterior region. By using the proposed digital restorative work flow, this case report demonstrated an effective communication pathway between the patient, clinician, and dental laboratory technician. Effective communication can help to achieve a more predictable and satisfactory esthetic outcome.

  11. TCAD simulation of the co-implantation species C, F, and N in MOS transistors

    NASA Astrophysics Data System (ADS)

    Bazizi, E. M.; Mok, K. R. C.; Benistant, F.; Yeong, S. H.; Teo, R. S.; Zechner, C.

    2012-11-01

    The optimization of advanced CMOS nodes below 65nm requires stringent control of both the lateral and vertical diffusion of the source/drain. One way to control this diffusion is to use co-implant species such as Carbon, Fluorine, and Nitrogen with the standard dopants (Boron, Phosphorus, and Arsenic). The role played by the co-implant species is to reduce dopant transient enhanced diffusion (TED), which is caused by the large number of interstitials generated during ion implantation. Although the mechanisms responsible for controlling TED are well understood, the modeling of such mechanisms in a continuum TCAD simulator remains a challenge. We shall first review the current physical understanding behind TED reduction by the co-implant species. Subsequently, we shall show how this can be implemented in a continuum simulator. Afterward, we will present a set of models capable not only of reproducing experimental data based on SIMS measurements, but can also be used in the simulation of 2D and 3D MOS transistors. The models are based on the trapping of interstitials by the co-implant species and their complexes. The evolution of these complexes will affect the diffusion and activation of the doping species and the shape of the final source/drain junction profiles.

  12. 23 CFR 636.104 - Does this part apply to all Federal-aid design-build projects?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Federal-aid design-build projects? The provisions of this part apply to all Federal-aid design-build... 23 Highways 1 2010-04-01 2010-04-01 false Does this part apply to all Federal-aid design-build projects? 636.104 Section 636.104 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF...

  13. 23 CFR 636.104 - Does this part apply to all Federal-aid design-build projects?

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Federal-aid design-build projects? The provisions of this part apply to all Federal-aid design-build... 23 Highways 1 2013-04-01 2013-04-01 false Does this part apply to all Federal-aid design-build projects? 636.104 Section 636.104 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF...

  14. 23 CFR 636.104 - Does this part apply to all Federal-aid design-build projects?

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Federal-aid design-build projects? The provisions of this part apply to all Federal-aid design-build... 23 Highways 1 2012-04-01 2012-04-01 false Does this part apply to all Federal-aid design-build projects? 636.104 Section 636.104 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF...

  15. 23 CFR 636.104 - Does this part apply to all Federal-aid design-build projects?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Federal-aid design-build projects? The provisions of this part apply to all Federal-aid design-build... 23 Highways 1 2011-04-01 2011-04-01 false Does this part apply to all Federal-aid design-build projects? 636.104 Section 636.104 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF...

  16. 23 CFR 636.104 - Does this part apply to all Federal-aid design-build projects?

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... Federal-aid design-build projects? The provisions of this part apply to all Federal-aid design-build... 23 Highways 1 2014-04-01 2014-04-01 false Does this part apply to all Federal-aid design-build projects? 636.104 Section 636.104 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF...

  17. Computer-Aided Engineering of Batteries for Designing Better Li-Ion Batteries (Presentation)

    SciTech Connect

    Pesaran, A.; Kim, G. H.; Smith, K.; Lee, K. J.; Santhanagopalan, S.

    2012-02-01

    This presentation describes the current status of the DOE's Energy Storage R and D program, including modeling and design tools and the Computer-Aided Engineering for Automotive Batteries (CAEBAT) program.

  18. Computer aided design of microcircuits. Citations from the NTIS data base

    NASA Astrophysics Data System (ADS)

    Reed, W. E.

    1980-09-01

    Government sponsored research covering the computer aided design, modeling, layout, and packaging of integrated and other microelectronic circuits are cited. Computer programs and the use of computer graphics are included.

  19. Analytical Design Package (ADP2): A computer aided engineering tool for aircraft transparency design

    NASA Technical Reports Server (NTRS)

    Wuerer, J. E.; Gran, M.; Held, T. W.

    1994-01-01

    The Analytical Design Package (ADP2) is being developed as a part of the Air Force Frameless Transparency Program (FTP). ADP2 is an integrated design tool consisting of existing analysis codes and Computer Aided Engineering (CAE) software. The objective of the ADP2 is to develop and confirm an integrated design methodology for frameless transparencies, related aircraft interfaces, and their corresponding tooling. The application of this methodology will generate high confidence for achieving a qualified part prior to mold fabrication. ADP2 is a customized integration of analysis codes, CAE software, and material databases. The primary CAE integration tool for the ADP2 is P3/PATRAN, a commercial-off-the-shelf (COTS) software tool. The open architecture of P3/PATRAN allows customized installations with different applications modules for specific site requirements. Integration of material databases allows the engineer to select a material, and those material properties are automatically called into the relevant analysis code. The ADP2 materials database will be composed of four independent schemas: CAE Design, Processing, Testing, and Logistics Support. The design of ADP2 places major emphasis on the seamless integration of CAE and analysis modules with a single intuitive graphical interface. This tool is being designed to serve and be used by an entire project team, i.e., analysts, designers, materials experts, and managers. The final version of the software will be delivered to the Air Force in Jan. 1994. The Analytical Design Package (ADP2) will then be ready for transfer to industry. The package will be capable of a wide range of design and manufacturing applications.

  20. Assessment of Chair-side Computer-Aided Design and Computer-Aided Manufacturing Restorations: A Review of the Literature

    PubMed Central

    Baroudi, Kusai; Ibraheem, Shukran Nasser

    2015-01-01

    Background: This paper aimed to evaluate the application of computer-aided design and computer-aided manufacturing (CAD-CAM) technology and the factors that affect the survival of restorations. Materials and Methods: A thorough literature search using PubMed, Medline, Embase, Science Direct, Wiley Online Library and Grey literature were performed from the year 2004 up to June 2014. Only relevant research was considered. Results: The use of chair-side CAD/CAM systems is promising in all dental branches in terms of minimizing time and effort made by dentists, technicians and patients for restoring and maintaining patient oral function and aesthetic, while providing high quality outcome. Conclusion: The way of producing and placing the restorations made with the chair-side CAD/CAM (CEREC and E4D) devices is better than restorations made by conventional laboratory procedures. PMID:25954082

  1. Dual-scan technique for the customization of zirconia computer-aided design/computer-aided manufacturing frameworks

    PubMed Central

    Andreiuolo, Rafael Ferrone; Sabrosa, Carlos Eduardo; Dias, Katia Regina H. Cervantes

    2013-01-01

    The use of bi-layered all-ceramic crowns has continuously grown since the introduction of computer-aided design/computer-aided manufacturing (CAD/CAM) zirconia cores. Unfortunately, despite the outstanding mechanical properties of zirconia, problems related to porcelain cracking or chipping remain. One of the reasons for this is that ceramic copings are usually milled to uniform thicknesses of 0.3-0.6 mm around the whole tooth preparation. This may not provide uniform thickness or appropriate support for the veneering porcelain. To prevent these problems, the dual-scan technique demonstrates an alternative that allows the restorative team to customize zirconia CAD/CAM frameworks with adequate porcelain thickness and support in a simple manner. PMID:24966718

  2. Computer-Aided Design Of Turbine Blades And Vanes

    NASA Technical Reports Server (NTRS)

    Hsu, Wayne Q.

    1988-01-01

    Quasi-three-dimensional method for determining aerothermodynamic configuration of turbine uses computer-interactive analysis and design and computer-interactive graphics. Design procedure executed rapidly so designer easily repeats it to arrive at best performance, size, structural integrity, and engine life. Sequence of events in aerothermodynamic analysis and design starts with engine-balance equations and ends with boundary-layer analysis and viscous-flow calculations. Analysis-and-design procedure interactive and iterative throughout.

  3. The Research of Computer Aided Farm Machinery Designing Method Based on Ergonomics

    NASA Astrophysics Data System (ADS)

    Gao, Xiyin; Li, Xinling; Song, Qiang; Zheng, Ying

    Along with agricultural economy development, the farm machinery product type Increases gradually, the ergonomics question is also getting more and more prominent. The widespread application of computer aided machinery design makes it possible that farm machinery design is intuitive, flexible and convenient. At present, because the developed computer aided ergonomics software has not suitable human body database, which is needed in view of farm machinery design in China, the farm machinery design have deviation in ergonomics analysis. This article puts forward that using the open database interface procedure in CATIA to establish human body database which aims at the farm machinery design, and reading the human body data to ergonomics module of CATIA can product practical application virtual body, using human posture analysis and human activity analysis module to analysis the ergonomics in farm machinery, thus computer aided farm machinery designing method based on engineering can be realized.

  4. NREL Software Aids Offshore Wind Turbine Designs (Fact Sheet)

    SciTech Connect

    Not Available

    2013-10-01

    NREL researchers are supporting offshore wind power development with computer models that allow detailed analyses of both fixed and floating offshore wind turbines. While existing computer-aided engineering (CAE) models can simulate the conditions and stresses that a land-based wind turbine experiences over its lifetime, offshore turbines require the additional considerations of variations in water depth, soil type, and wind and wave severity, which also necessitate the use of a variety of support-structure types. NREL's core wind CAE tool, FAST, models the additional effects of incident waves, sea currents, and the foundation dynamics of the support structures.

  5. Creation of Anatomically Accurate Computer-Aided Design (CAD) Solid Models from Medical Images

    NASA Technical Reports Server (NTRS)

    Stewart, John E.; Graham, R. Scott; Samareh, Jamshid A.; Oberlander, Eric J.; Broaddus, William C.

    1999-01-01

    Most surgical instrumentation and implants used in the world today are designed with sophisticated Computer-Aided Design (CAD)/Computer-Aided Manufacturing (CAM) software. This software automates the mechanical development of a product from its conceptual design through manufacturing. CAD software also provides a means of manipulating solid models prior to Finite Element Modeling (FEM). Few surgical products are designed in conjunction with accurate CAD models of human anatomy because of the difficulty with which these models are created. We have developed a novel technique that creates anatomically accurate, patient specific CAD solids from medical images in a matter of minutes.

  6. Computer aided optimal design of space reflectors and radiation concentrators

    NASA Astrophysics Data System (ADS)

    Saprykin, Oleg A.; Spirochkin, Yuriy K.; Kinelev, Vladimir G.; Sulimov, Valeriy D.

    1998-06-01

    The goal of space radiation receiver design is achievement of its maximal reflecting properties under some technological and financial restrictions. Optimal design problems of this type are characterized by nonconvex nondifferentiable objective functions. A numerical technique for optimal design of the structures and an applied software REFLEX under development are proposed.

  7. CFD Aided Design and Optimization of Francis Turbine Runners

    NASA Astrophysics Data System (ADS)

    Ayancik, Fatma; Demirel, Gizem; Celebioglu, Kutay; Acar, Erdem; Aradag, Selin; ETU Hydro Research Center Team

    2014-11-01

    Francis turbines are commonly used for hydroelectric power plants with their wide range of flow rate and head values. They are composed of five main components and they generate energy with the help of the runner connected to the generator. Therefore, runner is the most important part of a Francis turbine. All components of turbines are linked and they are designed to maximize the turbine efficiency. The dimensions of the runner vary depending on the design discharge, head and the speed of the rotor of the generators. In this study, a design methodology is developed to design turbine runners with the help of computational fluid dynamics and is applied to the runner design of three different hydroelectric power plant turbines. Multi objective design optimization is also performed and the response surfaces are investigated to obtain maximum turbine efficiency and cavitation free design. This study is financially supported by Turkish Ministry of Development.

  8. ESD protection device design using statistical methods

    NASA Astrophysics Data System (ADS)

    Shigyo, N.; Kawashima, H.; Yasuda, S.

    2002-12-01

    This paper describes a design of the electrostatic discharge (ESD) protection device to minimize its area Ap while maintaining the breakdown voltage VESD. Hypothesis tests using measured data were performed to find the severest applied serge condition and to select control factors for the design-of-experiments (DOE). Also, technology CAD (TCAD) was used to estimate VESD. An optimum device structure, where salicide block was employed, was found using statistical methods and TCAD.

  9. Computer-aided design tools for economical MEMS fabrication processes

    NASA Astrophysics Data System (ADS)

    Schneider, Christian; Priebe, Andreas; Brueck, Rainer; Hahn, Kai

    1999-03-01

    Since the early 70s when microsystem technology was first introduce an enormous market for MST-products has been developed. Airbag sensors, micro pumps, ink jet nozzles etc. and the market is just about to start up. Establishing these products for a reasonable price requires mass production. Meanwhile, also computer-based design-tools have been developed in order to reduce the expenses for MST-design. In contrast to other physical design processes like e.g. in micro electronics, MEMS physical design is characterized by the fact that each product requires a tailored sequence of fabrication steps, usually selected from a variety of processing alternatives. The selection from these alternatives is based on economical constraints. Therefore, the design has a strong influence on the money and time spent to take an MST-product to market.

  10. CFD Aided Design and Production of Hydraulic Turbines

    NASA Astrophysics Data System (ADS)

    Kaplan, Alper; Cetinturk, Huseyin; Demirel, Gizem; Ayli, Ece; Celebioglu, Kutay; Aradag, Selin; ETU Hydro Research Center Team

    2014-11-01

    Hydraulic turbines are turbo machines which produce electricity from hydraulic energy. Francis type turbines are the most common one in use today. The design of these turbines requires high engineering effort since each turbine is tailor made due to different head and discharge. Therefore each component of the turbine is designed specifically. During the last decades, Computational Fluid Dynamics (CFD) has become very useful tool to predict hydraulic machinery performance and save time and money for designers. This paper describes a design methodology to optimize a Francis turbine by integrating theoretical and experimental fundamentals of hydraulic machines and commercial CFD codes. Specific turbines are designed and manufactured with the help of a collaborative CFD/CAD/CAM methodology based on computational fluid dynamics and five-axis machining for hydraulic electric power plants. The details are presented in this study. This study is financially supported by Turkish Ministry of Development.

  11. Aiding Design of Wave Energy Converters via Computational Simulations

    NASA Astrophysics Data System (ADS)

    Jebeli Aqdam, Hejar; Ahmadi, Babak; Raessi, Mehdi; Tootkaboni, Mazdak

    2015-11-01

    With the increasing interest in renewable energy sources, wave energy converters will continue to gain attention as a viable alternative to current electricity production methods. It is therefore crucial to develop computational tools for the design and analysis of wave energy converters. A successful design requires balance between the design performance and cost. Here an analytical solution is used for the approximate analysis of interactions between a flap-type wave energy converter (WEC) and waves. The method is verified using other flow solvers and experimental test cases. Then the model is used in conjunction with a powerful heuristic optimization engine, Charged System Search (CSS) to explore the WEC design space. CSS is inspired by charged particles behavior. It searches the design space by considering candidate answers as charged particles and moving them based on the Coulomb's laws of electrostatics and Newton's laws of motion to find the global optimum. Finally the impacts of changes in different design parameters on the power takeout of the superior WEC designs are investigated. National Science Foundation, CBET-1236462.

  12. Anti AIDS drug design with the help of neural networks

    NASA Astrophysics Data System (ADS)

    Tetko, I. V.; Tanchuk, V. Yu.; Luik, A. I.

    1995-04-01

    Artificial neural networks were used to analyze and predict the human immunodefiency virus type 1 reverse transcriptase inhibitors. Training and control set included 44 molecules (most of them are well-known substances such as AZT, TIBO, dde, etc.) The biological activities of molecules were taken from literature and rated for two classes: active and inactive compounds according to their values. We used topological indices as molecular parameters. Four most informative parameters (out of 46) were chosen using cluster analysis and original input parameters' estimation procedure and were used to predict activities of both control and new (synthesized in our institute) molecules. We applied pruning network algorithm and network ensembles to obtain the final classifier and avoid chance correlation. The increasing of neural network generalization of the data from the control set was observed, when using the aforementioned methods. The prognosis of new molecules revealed one molecule as possibly active. It was confirmed by further biological tests. The compound was as active as AZT and in order less toxic. The active compound is currently being evaluated in pre clinical trials as possible drug for anti-AIDS therapy.

  13. Improved plug valve computer-aided design of plug element

    SciTech Connect

    Wordin, J.J.

    1990-02-01

    The purpose of this document is to present derivations of equations for the design of a plug valve and to present a computer program which performs the design calculations based on the derivations. The valve is based on a plug formed from a tractrix of revolution called a pseudosphere. It is of interest to be able to calculate various parameters for the plug for design purposes. For example, the surface area, volume, and center of gravity are important to determine friction and wear of the valve. A computer program in BASIC has been written to perform the design calculations. The appendix contains a computer program listing and verifications of results using approximation methods. A sample run is included along with necessary computer commands to run the program. 1 fig.

  14. WASTE REDUCTION USING COMPUTER-AIDED DESIGN TOOLS

    EPA Science Inventory

    Growing environmental concerns have spurred considerable interest in pollution prevention. In most instances, pollution prevention involves introducing radical changes to the design of processes so that waste generation is minimized.
    Process simulators can be effective tools i...

  15. Computer-Aided Apparel Design in University Curricula.

    ERIC Educational Resources Information Center

    Belleau, Bonnie D.; Bourgeois, Elva B.

    1991-01-01

    As computer-assisted design (CAD) become an integral part of the fashion industry, universities must integrate CAD into the apparel curriculum. Louisiana State University's curriculum enables students to collaborate in CAD problem solving with industry personnel. (SK)

  16. Computer-aided space shuttle orbiter wing design study

    NASA Technical Reports Server (NTRS)

    Phillips, W. P.; Decker, J. P.; Rau, T. R.; Glatt, C. R.

    1974-01-01

    An analytical and experimental investigation has been made to provide a space shuttle orbiter wing design that met the guideline requirements of landing performance, stability, and hypersonic trim for a specified center-of-gravity envelope. The analytical study was facilitated by the use of the Optimal Design Integration system (ODIN) and the experimental part of the investigation was conducted in the Langley low-turbulence pressure tunnel and the Langley continuous-flow hypersonic tunnel.

  17. TOWARD THE COMPUTER-AIDED DESIGN OF ION SEQUESTERING AGENTS

    SciTech Connect

    Hay, Benjamin

    2008-01-01

    A major impediment to introduction of new extractants to practical use is the large cost and long lead times for synthesis and testing of candidate molecules. Toward the goal of reducing this experimental burden, this talk describes a computational approach to the design of molecular receptors that are structurally organized for optimal coordination with ions. With a molecular-level understanding of how host architecture influences ion-binding affinity, it is possible to identify promising potential extractants before they are prepared and tested. Exploiting powerful concepts embodied in structure-based drug design to bear on host design, we have devised novel algorithms for building potential host structures from molecular fragments and rapid methods for comparing the binding-site organization of the resulting candidates. The result is a computer software program, called HostDesigner, which can generate and evaluate millions of new molecular structures per minute on a desktop personal computer. The utility of this software has been illustrated in the structural design of cation receptors such as crown ethers and anion receptors bearing urea groups.

  18. Laser imaging and computer-aided design and computer-aided manufacture in prosthetics and orthotics.

    PubMed

    Spaeth, John P

    2006-02-01

    Although Hanger Orthopedic Group, Inc., has been developing clinical protocols for its INSIGNIA scanner for more than 2 years, there are many applications that are currently in development and will be released over the next 2-year period after this publication. It is the goal of Hanger Orthopedic Group, Inc., to replace all plaster casting procedures with the laser scan and move toward a paperless environment where all images and documents are passed through its virtual network. INSIGNIA currently has five major production centers throughout the United States, which support more than 600 INSIGNIA certified clinicians. These clinicians staff more than 600 clinics in North America, all under the Hanger company name. The central fabrication service and the central design center processes hundreds of shapes per day (Fig. 27). So that any clinician in the field can use the expertise of the central designers and central fabricators to help with overflow or problems they might be having, the network that exists within Hanger is tied together and enhanced by INSIGNIA. Through virtual modification and centralization of these services, each patient receives the virtual collaboration of several clinicians with a total of years of experience. INSIGNIA has enhanced the patient experience. The enhancement is not only in removing the plaster from the process, but also in exposing each patient to the team of prosthetic experts working collaboratively behind the scenes. The rehabilitation industry continues to be bombarded with compliance paperwork and justifications. The INSIGNIA scan and resulting measurement reports give inherent strength to justifications based on volume change, surgical revisions, or tissue change. The files are kept in a data warehouse where they are vaulted and preserved presumably forever. Also, any of the shape graphics or measurement instruments can be printed into a discrete report that can become part of the patient's permanent record. Many physicians

  19. Accuracy of different types of computer-aided design/computer-aided manufacturing surgical guides for dental implant placement

    PubMed Central

    Geng, Wei; Liu, Changying; Su, Yucheng; Li, Jun; Zhou, Yanmin

    2015-01-01

    Purpose: To evaluate the clinical outcomes of implants placed using different types of computer-aided design/computer-aided manufacturing (CAD/CAM) surgical guides, including partially guided and totally guided templates, and determine the accuracy of these guides Materials and methods: In total, 111 implants were placed in 24 patients using CAD/CAM surgical guides. After implant insertion, the positions and angulations of the placed implants relative to those of the planned ones were determined using special software that matched pre- and postoperative computed tomography (CT) images, and deviations were calculated and compared between the different guides and templates. Results: The mean angular deviations were 1.72 ± 1.67 and 2.71 ± 2.58, the mean deviations in position at the neck were 0.27 ± 0.24 and 0.69 ± 0.66 mm, the mean deviations in position at the apex were 0.37 ± 0.35 and 0.94 ± 0.75 mm, and the mean depth deviations were 0.32 ± 0.32 and 0.51 ± 0.48 mm with tooth- and mucosa-supported stereolithographic guides, respectively (P < .05 for all). The mean distance deviations when partially guided (29 implants) and totally guided templates (30 implants) were used were 0.54 ± 0.50 mm and 0.89 ± 0.78 mm, respectively, at the neck and 1.10 ± 0.85 mm and 0.81 ± 0.64 mm, respectively, at the apex, with corresponding mean angular deviations of 2.56 ± 2.23° and 2.90 ± 3.0° (P > .05 for all). Conclusions: Tooth-supported surgical guides may be more accurate than mucosa-supported guides, while both partially and totally guided templates can simplify surgery and aid in optimal implant placement. PMID:26309497

  20. Calculator program aids sucker-rod systems design and optimization

    SciTech Connect

    Engineer, R.; Davis, C.; Knight, R.

    1983-08-01

    Given a few basic well parameters, the engineer may follow the step-by-step procedure for programming the design of sucker rod pumping systems for oil wells deeper than 2,000 ft using the HP-41 CV hand calculator.

  1. Armchair Survey Sampling: An Aid in Teaching Survey Design.

    ERIC Educational Resources Information Center

    Thompson, M. E.

    A fictitious community of 583 households was set up to simulate a survey population, and was used in two laboratory assignments where students "interviewed" householders by a quota sampling procedure and tested the performance of several probability sampling designs. (Author/JEG)

  2. An Information-Centric Framework for Designing Patient-Centered Medical Decision Aids and Risk Communication

    PubMed Central

    Franklin, Lyndsey; Plaisant, Catherine; Shneiderman, Ben

    2013-01-01

    Risk communication is a major challenge in productive patient-physician communication. Patient decision making responsibilities come with an implicit assumption that patients are sufficiently educated and confident in their abilities to make decisions about their care based on evidence based treatment recommendations. Attempts to improve health literacy in patients by way of graphical decision aids have met with success. Such decision aids typically have been designed for a general population and evaluated based on whether or not users of the decision aid can accurately report the data points in isolation. To classify decision aids, we present an information-centric framework for assessing the content delivered to patients. We provide examples of our framework from a literature survey and suggest ways improvements can be made by considering all dimensions of our framework. PMID:24551350

  3. Online Design Aid for Evaluating Manure Pit Ventilation Systems to Reduce Entry Risk.

    PubMed

    Manbeck, Harvey B; Hofstetter, Daniel W; Murphy, Dennis J; Puri, Virendra M

    2016-01-01

    On-farm manure storage pits contain both toxic and asphyxiating gases such as hydrogen sulfide, carbon dioxide, methane, and ammonia. Farmers and service personnel occasionally need to enter these pits to conduct repair and maintenance tasks. One intervention to reduce the toxic and asphyxiating gas exposure risk to farm workers when entering manure pits is manure pit ventilation. This article describes an online computational fluid dynamics-based design aid for evaluating the effectiveness of manure pit ventilation systems to reduce the concentrations of toxic and asphyxiating gases in the manure pits. This design aid, developed by a team of agricultural engineering and agricultural safety specialists at Pennsylvania State University, represents the culmination of more than a decade of research and technology development effort. The article includes a summary of the research efforts leading to the online design aid development and describes protocols for using the online design aid, including procedures for data input and for accessing design aid results. Design aid results include gas concentration decay and oxygen replenishment curves inside the manure pit and inside the barns above the manure pits, as well as animated motion pictures of individual gas concentration decay and oxygen replenishment in selected horizontal and vertical cut plots in the manure pits and barns. These results allow the user to assess (1) how long one needs to ventilate the pits to remove toxic and asphyxiating gases from the pit and barn, (2) from which portions of the barn and pit these gases are most and least readily evacuated, and (3) whether or not animals and personnel need to be removed from portions of the barn above the manure pit being ventilated.

  4. Online Design Aid for Evaluating Manure Pit Ventilation Systems to Reduce Entry Risk

    PubMed Central

    Manbeck, Harvey B.; Hofstetter, Daniel W.; Murphy, Dennis J.; Puri, Virendra M.

    2016-01-01

    On-farm manure storage pits contain both toxic and asphyxiating gases such as hydrogen sulfide, carbon dioxide, methane, and ammonia. Farmers and service personnel occasionally need to enter these pits to conduct repair and maintenance tasks. One intervention to reduce the toxic and asphyxiating gas exposure risk to farm workers when entering manure pits is manure pit ventilation. This article describes an online computational fluid dynamics-based design aid for evaluating the effectiveness of manure pit ventilation systems to reduce the concentrations of toxic and asphyxiating gases in the manure pits. This design aid, developed by a team of agricultural engineering and agricultural safety specialists at Pennsylvania State University, represents the culmination of more than a decade of research and technology development effort. The article includes a summary of the research efforts leading to the online design aid development and describes protocols for using the online design aid, including procedures for data input and for accessing design aid results. Design aid results include gas concentration decay and oxygen replenishment curves inside the manure pit and inside the barns above the manure pits, as well as animated motion pictures of individual gas concentration decay and oxygen replenishment in selected horizontal and vertical cut plots in the manure pits and barns. These results allow the user to assess (1) how long one needs to ventilate the pits to remove toxic and asphyxiating gases from the pit and barn, (2) from which portions of the barn and pit these gases are most and least readily evacuated, and (3) whether or not animals and personnel need to be removed from portions of the barn above the manure pit being ventilated. PMID:27303661

  5. Online Design Aid for Evaluating Manure Pit Ventilation Systems to Reduce Entry Risk.

    PubMed

    Manbeck, Harvey B; Hofstetter, Daniel W; Murphy, Dennis J; Puri, Virendra M

    2016-01-01

    On-farm manure storage pits contain both toxic and asphyxiating gases such as hydrogen sulfide, carbon dioxide, methane, and ammonia. Farmers and service personnel occasionally need to enter these pits to conduct repair and maintenance tasks. One intervention to reduce the toxic and asphyxiating gas exposure risk to farm workers when entering manure pits is manure pit ventilation. This article describes an online computational fluid dynamics-based design aid for evaluating the effectiveness of manure pit ventilation systems to reduce the concentrations of toxic and asphyxiating gases in the manure pits. This design aid, developed by a team of agricultural engineering and agricultural safety specialists at Pennsylvania State University, represents the culmination of more than a decade of research and technology development effort. The article includes a summary of the research efforts leading to the online design aid development and describes protocols for using the online design aid, including procedures for data input and for accessing design aid results. Design aid results include gas concentration decay and oxygen replenishment curves inside the manure pit and inside the barns above the manure pits, as well as animated motion pictures of individual gas concentration decay and oxygen replenishment in selected horizontal and vertical cut plots in the manure pits and barns. These results allow the user to assess (1) how long one needs to ventilate the pits to remove toxic and asphyxiating gases from the pit and barn, (2) from which portions of the barn and pit these gases are most and least readily evacuated, and (3) whether or not animals and personnel need to be removed from portions of the barn above the manure pit being ventilated. PMID:27303661

  6. Costs incurred by applying computer-aided design/computer-aided manufacturing techniques for the reconstruction of maxillofacial defects.

    PubMed

    Rustemeyer, Jan; Melenberg, Alex; Sari-Rieger, Aynur

    2014-12-01

    This study aims to evaluate the additional costs incurred by using a computer-aided design/computer-aided manufacturing (CAD/CAM) technique for reconstructing maxillofacial defects by analyzing typical cases. The medical charts of 11 consecutive patients who were subjected to the CAD/CAM technique were considered, and invoices from the companies providing the CAD/CAM devices were reviewed for every case. The number of devices used was significantly correlated with cost (r = 0.880; p < 0.001). Significant differences in mean costs were found between cases in which prebent reconstruction plates were used (€3346.00 ± €29.00) and cases in which they were not (€2534.22 ± €264.48; p < 0.001). Significant differences were also obtained between the costs of two, three and four devices, even when ignoring the cost of reconstruction plates. Additional fees provided by statutory health insurance covered a mean of 171.5% ± 25.6% of the cost of the CAD/CAM devices. Since the additional fees provide financial compensation, we believe that the CAD/CAM technique is suited for wide application and not restricted to complex cases. Where additional fees/funds are not available, the CAD/CAM technique might be unprofitable, so the decision whether or not to use it remains a case-to-case decision with respect to cost versus benefit.

  7. Computer-aided design of aptamers for cytochrome p450.

    PubMed

    Shcherbinin, Dmitrii S; Gnedenko, Oksana V; Khmeleva, Svetlana A; Usanov, Sergey A; Gilep, Andrei A; Yantsevich, Aliaksei V; Shkel, Tatsiana V; Yushkevich, Ivan V; Radko, Sergey P; Ivanov, Alexis S; Veselovsky, Alexander V; Archakov, Alexander I

    2015-08-01

    Aptamers are short single-stranded DNA or RNA oligonucleotides that can bind to their targets with high affinity and specificity. Usually, they are experimentally selected using the SELEX method. Here, we describe an approach toward the in silico selection of aptamers for proteins. This approach involves three steps: finding a potential binding site, designing the recognition and structural parts of the aptamers and evaluating the experimental affinity. Using this approach, a set of 15-mer aptamers for cytochrome P450 51A1 was designed using docking and molecular dynamics simulation. An experimental evaluation of the synthesized aptamers using SPR biosensor showed that these aptamers interact with cytochrome P450 51A1 with Kd values in the range of 10(-6)-10(-7) M. PMID:26166326

  8. Computer Aided Design of Computer Generated Holograms for electron beam fabrication

    NASA Technical Reports Server (NTRS)

    Urquhart, Kristopher S.; Lee, Sing H.; Guest, Clark C.; Feldman, Michael R.; Farhoosh, Hamid

    1989-01-01

    Computer Aided Design (CAD) systems that have been developed for electrical and mechanical design tasks are also effective tools for the process of designing Computer Generated Holograms (CGHs), particularly when these holograms are to be fabricated using electron beam lithography. CAD workstations provide efficient and convenient means of computing, storing, displaying, and preparing for fabrication many of the features that are common to CGH designs. Experience gained in the process of designing CGHs with various types of encoding methods is presented. Suggestions are made so that future workstations may further accommodate the CGH design process.

  9. The development of a spreadsheet-aided-engineering design tool for parachutes

    SciTech Connect

    Waye, D.E.; Whinery, L.D.

    1997-04-01

    A spreadsheet-aided engineering design tool has been developed to assist in the parachute design process. The new tool was developed during FY96 and utilized in the design of the flight termination parachute system for a 1900 lb. payload. Many modifications were made during the initial utilization of this tool. Work on the tool continues as the authors attempt to create an application tool for the parachute engineer.

  10. Computer-aided design of millimeter-wave E-plane filters

    NASA Astrophysics Data System (ADS)

    Shih, Y.-C.; Itoh, T.; Bui, L. Q.

    1983-02-01

    A computer-aided design (CAD) algorithm has been developed for a class of E-plane bandpass filters. The analysis portion of the algorithm is based on the residue-calculus technique and a generalized scattering parameter method. It is mathematically exact and numerically very efficient. Filters designed with this method have been fabricated and tested in Ka-band. Good agreement with design has been obtained.

  11. A methodology and a tool for the computer aided design with constraints of electrical devices

    SciTech Connect

    Wurtz, F.; Bigeon, J.; Poirson, C.

    1996-05-01

    A methodology for the computer aided constrained design of electrical devices is presented and validated through the design of a slotless permanent structure. It is based on the use of the analytical design equations of the device. Symbolic calculation is widely used to generate an analysis program and a sensitivity computation program. Those programs are linked with an optimization algorithm that can take constraints into account. The methodology is tested with an experimental software named PASCOSMA.

  12. Micrometric precision of prosthetic dental crowns obtained by optical scanning and computer-aided designing/computer-aided manufacturing system

    NASA Astrophysics Data System (ADS)

    das Neves, Flávio Domingues; de Almeida Prado Naves Carneiro, Thiago; do Prado, Célio Jesus; Prudente, Marcel Santana; Zancopé, Karla; Davi, Letícia Resende; Mendonça, Gustavo; Soares, Carlos José

    2014-08-01

    The current study evaluated prosthetic dental crowns obtained by optical scanning and a computer-aided designing/computer-aided manufacturing system using micro-computed tomography to compare the marginal fit. The virtual models were obtained with four different scanning surfaces: typodont (T), regular impressions (RI), master casts (MC), and powdered master casts (PMC). Five virtual models were obtained for each group. For each model, a crown was designed on the software and milled from feldspathic ceramic blocks. Micro-CT images were obtained for marginal gap measurements and the data were statistically analyzed by one-way analysis of variance followed by Tukey's test. The mean vertical misfit was T=62.6±65.2 μm; MC=60.4±38.4 μm; PMC=58.1±38.0 μm, and RI=89.8±62.8 μm. Considering a percentage of vertical marginal gap of up to 75 μm, the results were T=71.5%, RI=49.2%, MC=69.6%, and PMC=71.2%. The percentages of horizontal overextension were T=8.5%, RI=0%, MC=0.8%, and PMC=3.8%. Based on the results, virtual model acquisition by scanning the typodont (simulated mouth) or MC, with or without powder, showed acceptable values for the marginal gap. The higher result of marginal gap of the RI group suggests that it is preferable to scan this directly from the mouth or from MC.

  13. Computer program for design and performance analysis of navigation-aid power systems

    NASA Technical Reports Server (NTRS)

    Weiner, H.; Wiener, P.; Williams, K.

    1976-01-01

    The paper examines the requirements, design rationale, operation, and verification of a computer program designated as design synthesis/performance analysis (DSPA) computer program, which is capable of performing all the calculations necessary to understand the overall characteristics of solar array/battery power systems for navigation-aid applications. Despite the uncertainties in the erratic solar array degradation data and the potential impact on actual battery behavior, verification of the DSPA is considered successful. The program is shown to have the capability of simulating the performance of solar array/battery navigation-aid power systems. It can also be used to synthesize power system designs and provide essential design and cost data.

  14. DeMAID/GA an Enhanced Design Manager's Aid for Intelligent Decomposition

    NASA Technical Reports Server (NTRS)

    Rogers, J. L.

    1996-01-01

    Many companies are looking for new tools and techniques to aid a design manager in making decisions that can reduce the time and cost of a design cycle. One tool is the Design Manager's Aid for Intelligent Decomposition (DeMAID). Since the initial public release of DeMAID in 1989, much research has been done in the areas of decomposition, concurrent engineering, parallel processing, and process management; many new tools and techniques have emerged. Based on these recent research and development efforts, numerous enhancements have been added to DeMAID to further aid the design manager in saving both cost and time in a design cycle. The key enhancement, a genetic algorithm (GA), will be available in the next public release called DeMAID/GA. The GA sequences the design processes to minimize the cost and time in converging a solution. The major enhancements in the upgrade of DeMAID to DeMAID/GA are discussed in this paper. A sample conceptual design project is used to show how these enhancements can be applied to improve the design cycle.

  15. Assembly and insertion of a self-fitting hearing aid: design of effective instruction materials.

    PubMed

    Caposecco, Andrea; Hickson, Louise; Meyer, Carly

    2011-12-01

    A self-fitting hearing aid has been proposed as a viable option to meet the need for rehabilitation in areas where audiology services are unreliable. A successful outcome with a self-fitting hearing aid pivots in part on the clarity of the instructions accompanying the device. The aims of this article are (a) to review the literature to determine features that should be incorporated into written health-care materials and factors to consider in the design process when developing written instructions for a target audience of older adults and (b) to apply this information to the development of a set of written instructions as the first step in self-fitting of a hearing aid, assembling four parts and inserting the aid into the ear. The method involved a literature review of published peer reviewed research. The literature revealed four steps in the development of written health-care materials: planning, design, assessment of suitability, and pilot testing. Best practice design principles for each step were applied in the development of instructions for how to assemble and insert a hearing aid. Separate booklets were developed for the left and right aids and the content of each consisted of simple line drawings accompanied by captions. The reading level was Grade 3.5 equivalent and the Flesch Reading Ease Score was 91.1 indicating that the materials were "very easy" to read. It is essential to follow best practice design principles when developing written health-care materials to motivate the reader, maximize comprehension, and increase the likelihood of successful application of the content.

  16. Assembly and insertion of a self-fitting hearing aid: design of effective instruction materials.

    PubMed

    Caposecco, Andrea; Hickson, Louise; Meyer, Carly

    2011-12-01

    A self-fitting hearing aid has been proposed as a viable option to meet the need for rehabilitation in areas where audiology services are unreliable. A successful outcome with a self-fitting hearing aid pivots in part on the clarity of the instructions accompanying the device. The aims of this article are (a) to review the literature to determine features that should be incorporated into written health-care materials and factors to consider in the design process when developing written instructions for a target audience of older adults and (b) to apply this information to the development of a set of written instructions as the first step in self-fitting of a hearing aid, assembling four parts and inserting the aid into the ear. The method involved a literature review of published peer reviewed research. The literature revealed four steps in the development of written health-care materials: planning, design, assessment of suitability, and pilot testing. Best practice design principles for each step were applied in the development of instructions for how to assemble and insert a hearing aid. Separate booklets were developed for the left and right aids and the content of each consisted of simple line drawings accompanied by captions. The reading level was Grade 3.5 equivalent and the Flesch Reading Ease Score was 91.1 indicating that the materials were "very easy" to read. It is essential to follow best practice design principles when developing written health-care materials to motivate the reader, maximize comprehension, and increase the likelihood of successful application of the content. PMID:22389434

  17. Design of an aid to visual inspection workstation

    NASA Astrophysics Data System (ADS)

    Tait, Robert; Harding, Kevin

    2016-05-01

    Visual Inspection is the most common means for inspecting manufactured parts for random defects such as pits, scratches, breaks, corrosion or general wear. The reason for the need for visual inspection is the very random nature of what might be a defect. Some defects may be very rare, being seen once or twice a year, but May still be critical to part performance. Because of this random and rare nature, even the most sophisticated image analysis programs have not been able to recognize all possible defects. Key to any future automation of inspection is obtaining good sample images of what might be a defect. However, most visual check take no images and consequently generate no digital data or historical record beyond a simple count. Any additional tool to captures such images must be able to do so without taking addition time. This paper outlines the design of a potential visual inspection station that would be compatible with current visual inspection methods, but afford the means for reliable digital imaging and in many cases augmented capabilities to assist the inspection. Considerations in this study included: resolution, depth of field, feature highlighting, and ease of digital capture, annotations and inspection augmentation for repeatable registration as well as operator assistance and training.

  18. Simulation tools for computer-aided design and numerical investigations of high-power gyrotrons

    NASA Astrophysics Data System (ADS)

    Damyanova, M.; Balabanova, E.; Kern, S.; Illy, S.; Sabchevski, S.; Thumm, M.; Vasileva, E.; Zhelyazkov, I.

    2012-03-01

    Modelling and simulation are essential tools for computer-aided design (CAD), analysis and optimization of high-power gyrotrons used as radiation sources for electron cyclotron resonance heating (ECRH) and current drive (ECCD) of magnetically confined plasmas in the thermonuclear reactor ITER. In this communication, we present the current status of our simulation tools and discuss their further development.

  19. The state of PC-based CADD (computer-aided design and drafting) systems

    SciTech Connect

    Brandt, G.L.; Bowers, J.M.; Gorman, T.S.; Taylor, L.E.

    1988-07-11

    This report provides an overview of the state of the art of personal computer (PC)-based computer-aided design and drafting (CADD) systems for mechanical engineering applications. It presents the results of an evaluation performed on seven systems during October 1987 to March 1988 and summarizes the strengths and weaknesses of the systems.

  20. Web-Based Learning in the Computer-Aided Design Curriculum.

    ERIC Educational Resources Information Center

    Sung, Wen-Tsai; Ou, S. C.

    2002-01-01

    Applies principles of constructivism and virtual reality (VR) to computer-aided design (CAD) curriculum, particularly engineering, by integrating network, VR and CAD technologies into a Web-based learning environment that expands traditional two-dimensional computer graphics into a three-dimensional real-time simulation that enhances user…

  1. New Spaces for Learning: Designing College Facilities to Utilize Instructional Aids and Media. Revised.

    ERIC Educational Resources Information Center

    Hauf, Harold D.; And Others

    Colleges need appropriate large group instructional facilities for effective and efficient use of instructional aids and media. A well planned system of facilities must provide space for learning; production, origination, and support; storage and retrieval. Design begins with a building plan--a statement, made jointly by the administrator and…

  2. The Design, Implementation, and Formative Evaluation of a Classroom Aide Professional Development Training Program

    ERIC Educational Resources Information Center

    Dulfer, Katherine J.

    2013-01-01

    This dissertation focused on the process of designing, implementing, and formatively evaluating an eight week Classroom Aide Professional Development Training Program (CAPD-TP) on behavior management and academic instruction within the context of a New Jersey state approved private special education school for students with behavioral and/or…

  3. Therapist-Aided Exposure for Women with Lifelong Vaginismus: A Replicated Single-Case Design

    ERIC Educational Resources Information Center

    ter Kuile, Moniek M.; Bulte, Isis; Weijenborg, Philomeen T. M.; Beekman, Aart; Melles, Reinhilde; Onghena, Patrick

    2009-01-01

    Vaginismus is commonly described as a persistent difficulty in allowing vaginal entry of a penis or other object. Lifelong vaginismus occurs when a woman has never been able to have intercourse. A replicated single-case A-B-phase design was used to investigate the effectiveness of therapist-aided exposure for lifelong vaginismus. A baseline period…

  4. National Science Foundation 1989 Engineering Senior Design Projects To Aid the Disabled.

    ERIC Educational Resources Information Center

    Enderle, John D., Ed.

    Through the Bioengineering and Research to Aid the Disabled program of the National Science Foundation, design projects were awarded competitively to 16 universities. Senior engineering students at each of the universities constructed custom devices and software for disabled individuals. This compendium contains a description of each project in…

  5. Gathering Empirical Evidence Concerning Links between Computer Aided Design (CAD) and Creativity

    ERIC Educational Resources Information Center

    Musta'amal, Aede Hatib; Norman, Eddie; Hodgson, Tony

    2009-01-01

    Discussion is often reported concerning potential links between computer-aided designing and creativity, but there is a lack of systematic enquiry to gather empirical evidence concerning such links. This paper reports an indication of findings from other research studies carried out in contexts beyond general education that have sought evidence…

  6. Office of Student Financial Aid Quality Improvement Program: Design and Implementation Plan.

    ERIC Educational Resources Information Center

    Advanced Technology, Inc., Reston, VA.

    The purpose and direction of the Office of Student Financial Aid (OSFA) quality improvement program are described. The background and context for the Pell Grant quality control (QC) design study and the meaning of QC are reviewed. The general approach to quality improvement consists of the following elements: a strategic approach that enables OSFA…

  7. Low-floor bus design preferences of walking aid users during simulated boarding and alighting.

    PubMed

    D'souza, Clive; Paquet, Victor; Lenker, James; Steinfeld, Edward; Bareria, Piyush

    2012-01-01

    Low-floor buses represent a significant improvement in accessible public transit for passengers with limited mobility. However, there is still a need for research on the inclusive design of transit buses to identify specific low-floor bus design conditions that are either particularly accommodating or challenging for passengers with functional and mobility impairments. These include doorway locations, seating configuration and the large front wheel-well covers that collectively impact boarding, alighting and interior movement of passengers. Findings from a laboratory study using a static full-scale simulation of a lowfloor bus to evaluate the impact of seating configuration and crowding on interior movement and accessibility for individuals with and without walking aids are presented (n=41). Simulated bus journeys that included boarding, fare payment, seating, and alighting were performed. Results from video observations and subjective assessments showed differences in boarding and alighting performance and users' perceptions of task difficulty. The need for assistive design features (e.g. handholds, stanchions), legroom and stowage space for walking aids was evident. These results demonstrate that specific design conditions in low-floor buses can significantly impact design preference among those who use walking aids. Consideration of ergonomics and inclusive design can therefore be used to improve the design of low-floor buses.

  8. Computer-aided design of a proton pump

    NASA Technical Reports Server (NTRS)

    New, Michael H.; Pohorille, Andrew; Chang, Sherwood (Technical Monitor)

    1997-01-01

    The use of transmembrane proton gradients in energy transduction is an almost universal feature of life on earth. These proton gradients are established and maintained by specialized assemblies of proteins which actively pump protons across membranes. One broad class of proton pumps uses captured light energy to drive the proton pumping. Our goal is to elucidate the minimum structural requirements of a light-driven proton-pump. There are two basic components to a simple light-driven proton pump: a source of photo-generated protons and a "gate-keeper" which prevents these protons from reattaching themselves to their source. A wide variety of molecules in the membrane, even as simple as polycyclic aromatic hydrocarbons, are capable of releasing protons when illuminated. Our work is therefore focused on the design of the "gate-keeper." Our initial model involves a pair of proton acceptors, coupled to each other by a transient water bridge, and supported in the membrane by a small bundle of peptide helices. Upon illumination, the proton source transfers its proton to the:- first acceptor of the gate-keeper. While the reverse reaction is highly probable, all that is needed to ensure irreversibility is a nonvanishing probability that the proton will be transferred to the second acceptor across a transient water bridge. Back transfer of the proton to the first acceptor, and thence to the proton source, is impeded by the free energy required to move the proton uphill towards the. proton source and by the disruption of the transient water bridge. As a prototypical water-bridged proton transfer system, we are studying the transfer of a proton across a water bridge from a formic acid to a formate anion. With a pK(sub alpha), of 3.7. formic acid is a good model for the acidic amino acids glutamate and aspartate which are good candidates for gate-keeper proton acceptors. Simulations of proton transfer reactions in a membrane are complicated by the quantum mechanical nature of

  9. Advancing lighting and daylighting simulation: The transition from analysis to design aid tools

    SciTech Connect

    Hitchcock, R.J.

    1995-05-01

    This paper explores three significant software development requirements for making the transition from stand-alone lighting simulation/analysis tools to simulation-based design aid tools. These requirements include specialized lighting simulation engines, facilitated methods for creating detailed simulatable building descriptions, an automated techniques for providing lighting design guidance. Initial computer implementations meant to address each of these requirements are discussed to further elaborate these requirements and to illustrate work-in-progress.

  10. Multicriteria aided design of integrated heating-cooling energy systems in buildings.

    PubMed

    Mróz, Tomasz M

    2010-08-01

    This paper presents an analysis of the possible application of integrated heating-cooling systems in buildings. The general algorithm of integrated heating-cooling system design aid was formulated. The evaluation criteria of technically acceptable variants were defined. Fossil fuel energy consumption, carbon dioxide emission, investment, and total exploitation cost were identified as the most important factors describing the considered decision problem. The multicriteria decision aid method ELECTRE III was proposed as the decision tool for the choice of the most compromised variant. The proposed method was used for a case study calculation-the choice of an integrated heating-cooling system for an office building.

  11. The theory, design, and operation of the suppressed carrier data-aided tracking receiver

    NASA Technical Reports Server (NTRS)

    Simon, M. K.; Springett, J. C.

    1973-01-01

    A viable, efficient, and easily mechanized carrier regenerating receiver for use in suppressed carrier-tracking system is described. The receiver referred to as a data-aided receiver (DAR) incorporates a data-aided loop (DAL) which provides the required carrier reference signal. The DAL employs the principle of decision feedback and as such is more efficient than other forms of suppressed carrier-tracking loops. The analysis, design, and implementation of the DAR are covered in detail. Performance comparisons and mechanization tradeoffs are made, wherever possible, with discrete carrier systems and other suppressed carrier systems presently in use. Experimental performance verification is given throughout in support of the theory presented.

  12. Enhancements to the Design Manager's Aide for Intelligent Decomposition (DeMAID)

    NASA Technical Reports Server (NTRS)

    Rogers, James L.; Barthelemy, Jean-Francois M.

    1992-01-01

    This paper discusses the addition of two new enhancements to the program Design Manager's Aide for Intelligent Decomposition (DeMAID). DeMAID is a knowledge-based tool used to aid a design manager in understanding the interactions among the tasks of a complex design problem. This is done by ordering the tasks to minimize feedback, determining the participating subsystems, and displaying them in an easily understood format. The two new enhancements include (1) rules for ordering a complex assembly process and (2) rules for determining which analysis tasks must be re-executed to compute the output of one task based on a change in input to that or another task.

  13. Enhancements to the Design Manager's Aide for Intelligent Decomposition (DeMaid)

    NASA Technical Reports Server (NTRS)

    Rogers, James L.; Barthelemy, Jean-Francois M.

    1992-01-01

    This paper discusses the addition of two new enhancements to the program Design Manager's Aide for Intelligent Decomposition (DeMAID). DeMAID is a knowledge-based tool used to aid a design manager in understanding the interactions among the tasks of a complex design problem. This is done by ordering the tasks to minimize feedback, determining the participating subsystems, and displaying them in an easily understood format. The two new enhancements include (1) rules for ordering a complex assembly process and (2) rules for determining which analysis tasks must be re-executed to compute the output of one task based on a change in input to that or another task.

  14. Single-event response of the SiGe HBT in TCAD simulations and laser microbeam experiment

    NASA Astrophysics Data System (ADS)

    Li, Pei; Guo, Hong-Xia; Guo, Qi; Zhang, Jin-Xin; Xiao, Yao; Wei, Ying; Cui, Jiang-Wei; Wen, Lin; Liu, Mo-Han; Wang, Xin

    2015-08-01

    In this paper the single-event responses of the silicon germanium heterojunction bipolar transistors (SiGe HBTs) are investigated by TCAD simulations and laser microbeam experiment. A three-dimensional (3D) simulation model is established, the single event effect (SEE) simulation is further carried out on the basis of SiGe HBT devices, and then, together with the laser microbeam test, the charge collection behaviors are analyzed, including the single event transient (SET) induced transient terminal currents, and the sensitive area of SEE charge collection. The simulations and experimental results are discussed in detail and it is demonstrated that the nature of the current transient is controlled by the behaviors of the collector-substrate (C/S) junction and charge collection by sensitive electrodes, thereby giving out the sensitive area and electrode of SiGe HBT in SEE. Project supported by the National Natural Science Foundation of China (Grant No. 61274106).

  15. Computer-Aided Designed, 3-Dimensionally Printed Porous Tissue Bioscaffolds For Craniofacial Soft Tissue Reconstruction

    PubMed Central

    Zopf, David A.; Mitsak, Anna G.; Flanagan, Colleen L.; Wheeler, Matthew; Green, Glenn E.; Hollister, Scott J.

    2016-01-01

    Objectives To determine the potential of integrated image-based Computer Aided Design (CAD) and 3D printing approach to engineer scaffolds for head and neck cartilaginous reconstruction for auricular and nasal reconstruction. Study Design Proof of concept revealing novel methods for bioscaffold production with in vitro and in vivo animal data. Setting Multidisciplinary effort encompassing two academic institutions. Subjects and Methods DICOM CT images are segmented and utilized in image-based computer aided design to create porous, anatomic structures. Bioresorbable, polycaprolactone scaffolds with spherical and random porous architecture are produced using a laser-based 3D printing process. Subcutaneous in vivo implantation of auricular and nasal scaffolds was performed in a porcine model. Auricular scaffolds were seeded with chondrogenic growth factors in a hyaluronic acid/collagen hydrogel and cultured in vitro over 2 months duration. Results Auricular and nasal constructs with several microporous architectures were rapidly manufactured with high fidelity to human patient anatomy. Subcutaneous in vivo implantation of auricular and nasal scaffolds resulted in excellent appearance and complete soft tissue ingrowth. Histologic analysis of in vitro scaffolds demonstrated native appearing cartilaginous growth respecting the boundaries of the scaffold. Conclusions Integrated image-based computer-aided design (CAD) and 3D printing processes generated patient-specific nasal and auricular scaffolds that supported cartilage regeneration. PMID:25281749

  16. Computer-aided analysis and design of the shape rolling process for producing turbine engine airfoils

    NASA Technical Reports Server (NTRS)

    Lahoti, G. D.; Akgerman, N.; Altan, T.

    1978-01-01

    Mild steel (AISI 1018) was selected as model cold rolling material and Ti-6A1-4V and Inconel 718 were selected as typical hot rolling and cold rolling alloys, respectively. The flow stress and workability of these alloys were characterized and friction factor at the roll/workpiece interface was determined at their respective working conditions by conducting ring tests. Computer-aided mathematical models for predicting metal flow and stresses, and for simulating the shape rolling process were developed. These models utilized the upper bound and the slab methods of analysis, and were capable of predicting the lateral spread, roll separating force, roll torque, and local stresses, strains and strain rates. This computer-aided design system was also capable of simulating the actual rolling process, and thereby designing the roll pass schedule in rolling of an airfoil or a similar shape.

  17. Computer-Aided Design/Manufacturing (CAD/M) for high-speed interconnect

    NASA Astrophysics Data System (ADS)

    Santoski, N. F.

    1981-10-01

    The objective of the Computer-Aided Design/Manufacturing (CAD/M) for High-Speed Interconnect Program study was to assess techniques for design, analysis and fabrication of interconnect structures between high-speed logic ICs that are clocked in the 200 MHz to 5 GHz range. Interconnect structure models were investigated and integrated with existing device models. Design rules for interconnects were developed in terms of parameters that can be installed in software that is used for the design, analysis and fabrication of circuits. To implement these design rules in future software development, algorithms and software development techniques were defined. Major emphasis was on Printed Wiring Board and hybrid level circuits as opposed to monolithic chips. Various packaging schemes were considered, including controlled impedance lines in the 50 to 200 ohms range where needed. The design rules developed are generic in nature, in that various architecture classes and device technologies were considered.

  18. Mandibular Reconstruction Using a Custom-Made Titanium Prosthesis: A Case Report on the Use of Virtual Surgical Planning and Computer-Aided Design/Computer-Aided Manufacturing.

    PubMed

    Ow, Andrew; Tan, Winston; Pienkowski, Lukasz

    2016-09-01

    The use of virtual surgical planning and computer-aided design/computer-aided manufacturing has been reported to enhance the planning for the reconstruction of mandibular continuity defects. This case report illustrates the use of this technology in the fabrication of a custom-made titanium prosthesis to restore a segmental mandibular defect. The design specifications and sequence of the custom-made titanium prosthesis are discussed. Although successful in this case, there are limitations in its application and case selection is of vital importance. PMID:27516841

  19. Mandibular Reconstruction Using a Custom-Made Titanium Prosthesis: A Case Report on the Use of Virtual Surgical Planning and Computer-Aided Design/Computer-Aided Manufacturing.

    PubMed

    Ow, Andrew; Tan, Winston; Pienkowski, Lukasz

    2016-09-01

    The use of virtual surgical planning and computer-aided design/computer-aided manufacturing has been reported to enhance the planning for the reconstruction of mandibular continuity defects. This case report illustrates the use of this technology in the fabrication of a custom-made titanium prosthesis to restore a segmental mandibular defect. The design specifications and sequence of the custom-made titanium prosthesis are discussed. Although successful in this case, there are limitations in its application and case selection is of vital importance.

  20. Tools to aid the specification and design of flight software, appendix B

    NASA Technical Reports Server (NTRS)

    Bristow, G.

    1980-01-01

    The tasks that are normally performed during the specification and architecture design stages of software development are identified. Ways that tools could perform, or aid the performance, of such tasks are also identified. Much of the verification and analysis that is suggested is currently rarely performed during these early stages, but it is believed that this analysis should be done as early as possible so as to detect errors as early as possible.

  1. Computer-aided design and drafting visualization of anatomical structure of the human eye and orbit

    NASA Astrophysics Data System (ADS)

    Parshall, Robert F.; Sadler, Lewis L.

    1991-04-01

    A generalized " anatomically standard" eyeball was geometrically modeled on a Computer-Aided Design and Drafting (CADD) workstation based on published conceptual norms of dimension radii of curvature alignments etc. An orbital environment for this model was concurrently prepared by serial section reconstruction of a cadaver specimen. Issues addressed include orienting unregistered sections the utility of interactive CADDsupported visual logic in interpretive decision making and the value of geometric models.

  2. Integrating aerodynamic surface modeling for computational fluid dynamics with computer aided structural analysis, design, and manufacturing

    NASA Technical Reports Server (NTRS)

    Thorp, Scott A.

    1992-01-01

    This presentation will discuss the development of a NASA Geometry Exchange Specification for transferring aerodynamic surface geometry between LeRC systems and grid generation software used for computational fluid dynamics research. The proposed specification is based on a subset of the Initial Graphics Exchange Specification (IGES). The presentation will include discussion of how the NASA-IGES standard will accommodate improved computer aided design inspection methods and reverse engineering techniques currently being developed. The presentation is in viewgraph format.

  3. IDEAS: A multidisciplinary computer-aided conceptual design system for spacecraft

    NASA Technical Reports Server (NTRS)

    Ferebee, M. J., Jr.

    1984-01-01

    During the conceptual development of advanced aerospace vehicles, many compromises must be considered to balance economy and performance of the total system. Subsystem tradeoffs may need to be made in order to satisfy system-sensitive attributes. Due to the increasingly complex nature of aerospace systems, these trade studies have become more difficult and time-consuming to complete and involve interactions of ever-larger numbers of subsystems, components, and performance parameters. The current advances of computer-aided synthesis, modeling and analysis techniques have greatly helped in the evaluation of competing design concepts. Langley Research Center's Space Systems Division is currently engaged in trade studies for a variety of systems which include advanced ground-launched space transportation systems, space-based orbital transfer vehicles, large space antenna concepts and space stations. The need for engineering analysis tools to aid in the rapid synthesis and evaluation of spacecraft has led to the development of the Interactive Design and Evaluation of Advanced Spacecraft (IDEAS) computer-aided design system. The ADEAS system has been used to perform trade studies of competing technologies and requirements in order to pinpoint possible beneficial areas for research and development. IDEAS is presented as a multidisciplinary tool for the analysis of advanced space systems. Capabilities range from model generation and structural and thermal analysis to subsystem synthesis and performance analysis.

  4. Design model of computerized personal decision aid for youth: An expert review

    NASA Astrophysics Data System (ADS)

    Sarif, Siti Mahfuzah; Ibrahim, Norfiza; Shiratuddin, Norshuhada

    2016-08-01

    This paper provides a structured review of a design model of a computerized personal decision aid that is intended for youth, named as YouthPDA Design Model. The proposed design model was examined by experts in related areas to ensure the appropriateness of the proposed components and elements, relevancy of the terminologies used, logic of the flow, usability, and practicality of the design model towards development of YouthPDA application. Seven experts from related areas were involved in the evaluation. Discussions on the findings obtained from the expert review are included in this paper. Finally, a revised design model of YouthPDA is proposed as main guidance to develop YouthPDA application.

  5. Metalloporphyrin catalysts for oxygen reduction developed using computer-aided molecular design

    SciTech Connect

    Ryba, G.N.; Hobbs, J.D.; Shelnutt, J.A.

    1996-04-01

    The objective of this project is the development of a new class of metalloporphyrin materials used as catalsyts for use in fuel cell applications. The metalloporphyrins are excellent candidates for use as catalysts at both the anode and cathode. The catalysts reduce oxygen in 1 M potassium hydroxide, as well as in 2 M sulfuric acid. Covalent attachment to carbon supports is being investigated. The computer-aided molecular design is an iterative process, in which experimental results feed back into the design of future catalysts.

  6. Design, Development, and Evaluation of Visual Aids for Communicating Prescription Drug Instructions to Nonliterate Patients in Rural Cameroon.

    ERIC Educational Resources Information Center

    Ngoh, Lucy N.; Shepherd, Marvin D.

    1997-01-01

    Culturally sensitive visual aids designed to help convey drug information to nonliterate female adults requiring antibiotics were developed. Researchers conceptualized the messages, and a local artist produced the visual aids. Comprehension and compliance with prescription instructions were evaluated (N=78). Results and practical implications are…

  7. Computer-aided design of control systems to meet many requirements

    NASA Technical Reports Server (NTRS)

    Schy, A. A.; Adams, W. M., Jr.; Johnson, K. G.

    1974-01-01

    A method is described for using nonlinear programing in the computer-aided design of airplane control systems. It is assumed that the quality of such systems depends on many criteria. These criteria are included in the constraints vector (instead of attempting to combine them into a single scalar criterion, as is usually done), and the design proceeds through a sequence of nonlinear programing solutions in which the designer varies the specification of sets of requirements levels. The method is applied to design of a lateral stability augmentation system (SAS) for a fighter airplane, in which the requirements vector is chosen from the official handling qualities specifications. Results are shown for several simple SAS configurations designed to obtain desirable handling qualities over all design flight conditions with minimum feedback gains. The choice of the final design for each case is not unique but depends on the designer's decision as to which achievable set of requirements levels represents the best for that system. Results indicate that it may be possible to design constant parameter SAS which can satisfy the most stringent handling qualities requirements for fighter airplanes in all flight conditions. The role of the designer as a decision maker, interacting with the computer program, is discussed. Advantages of this type of designer-computer interaction are emphasized. Desirable extensions of the method are indicated.

  8. Automated a complex computer aided design concept generated using macros programming

    NASA Astrophysics Data System (ADS)

    Rizal Ramly, Mohammad; Asrokin, Azharrudin; Abd Rahman, Safura; Zulkifly, Nurul Ain Md

    2013-12-01

    Changing a complex Computer Aided design profile such as car and aircraft surfaces has always been difficult and challenging. The capability of CAD software such as AutoCAD and CATIA show that a simple configuration of a CAD design can be easily modified without hassle, but it is not the case with complex design configuration. Design changes help users to test and explore various configurations of the design concept before the production of a model. The purpose of this study is to look into macros programming as parametric method of the commercial aircraft design. Macros programming is a method where the configurations of the design are done by recording a script of commands, editing the data value and adding a certain new command line to create an element of parametric design. The steps and the procedure to create a macro programming are discussed, besides looking into some difficulties during the process of creation and advantage of its usage. Generally, the advantages of macros programming as a method of parametric design are; allowing flexibility for design exploration, increasing the usability of the design solution, allowing proper contained by the model while restricting others and real time feedback changes.

  9. Role of computer-aided drug design in modern drug discovery.

    PubMed

    Macalino, Stephani Joy Y; Gosu, Vijayakumar; Hong, Sunhye; Choi, Sun

    2015-09-01

    Drug discovery utilizes chemical biology and computational drug design approaches for the efficient identification and optimization of lead compounds. Chemical biology is mostly involved in the elucidation of the biological function of a target and the mechanism of action of a chemical modulator. On the other hand, computer-aided drug design makes use of the structural knowledge of either the target (structure-based) or known ligands with bioactivity (ligand-based) to facilitate the determination of promising candidate drugs. Various virtual screening techniques are now being used by both pharmaceutical companies and academic research groups to reduce the cost and time required for the discovery of a potent drug. Despite the rapid advances in these methods, continuous improvements are critical for future drug discovery tools. Advantages presented by structure-based and ligand-based drug design suggest that their complementary use, as well as their integration with experimental routines, has a powerful impact on rational drug design. In this article, we give an overview of the current computational drug design and their application in integrated rational drug development to aid in the progress of drug discovery research.

  10. Evaluation of computer-aided design and drafting for the electric power industry. Final report

    SciTech Connect

    Anuskiewicz, T.; Barduhn, G.; Lowther, B.; Osman, I.

    1984-01-01

    This report reviews current and future computer-aided design and drafting (CADD) technology relative to utility needs and to identify useful development projects that may be undertaken by EPRI. The principal conclusions are that computer aids offer substantial cost and time savings and that computer systems are being developed to take advantage of the savings. Data bases are not available for direct communication between computers used by the power industry and will limit benefits to the industry. Recommendations are made for EPRI to take the initiative to develop the data bases for direct communication between power industry computers and to research, develop, and demonstrate new applications within the industry. Key components of a CADD system are described. The state of the art of two- and three-dimensional CADD systems to perform graphics and project management control functions are assessed. Comparison is made of three-dimensional electronic models and plastic models.

  11. DeMAID: A Design Manager's Aide for Intelligent Decomposition user's guide

    NASA Technical Reports Server (NTRS)

    Rogers, James L.

    1989-01-01

    A design problem is viewed as a complex system divisible into modules. Before the design of a complex system can begin, the couplings among modules and the presence of iterative loops is determined. This is important because the design manager must know how to group the modules into subsystems and how to assign subsystems to design teams so that changes in one subsystem will have predictable effects on other subsystems. Determining these subsystems is not an easy, straightforward process and often important couplings are overlooked. Moreover, the planning task must be repeated as new information become available or as the design specifications change. The purpose of this research is to develop a knowledge-based tool called the Design Manager's Aide for Intelligent Decomposition (DeMAID) to act as an intelligent advisor for the design manager. DeMaid identifies the subsystems of a complex design problem, orders them into a well-structured format, and marks the couplings among the subsystems to facilitate the use of multilevel tools. DeMAID also provides the design manager with the capability of examining the trade-offs between sequential and parallel processing. This type of approach could lead to a substantial savings or organizing and displaying a complex problem as a sequence of subsystems easily divisible among design teams. This report serves as a User's Guide for the program.

  12. An evaluation of computer aided design of below-knee prosthetic sockets.

    PubMed

    Topper, A K; Fernie, G R

    1990-12-01

    Forty-eight below-knee amputees compared sockets designed using CANFIT computer aided design (CAD) software with sockets designed using conventional methods. Each subject was fitted by one prosthetist who used conventional techniques and one who used the CANFIT system to design the socket. Prosthetists alternated design methods for each new subject. The prosthetist using the conventional techniques was allowed up to 2 design attempts and the prosthetist using the CANFIT system was allowed up to 5 design attempts. After 2 design attempts with each method 21% of the subjects preferred the CANFIT design socket. Following up to 5 attempts 54% preferred the CANFIT designed socket. A jury of experts made an assessment of the CANFIT system and of CAD in prosthetics. The jury did not think that the version of the system tested was cost effective but that at the rate that it was improving it would become such within 3 to 5 years. The jury noted that, as well as monetary benefits, CAD presents the possibility of benefits in other areas such as research and teaching. A number of specific suggestions regarding the use and development of CAD in prosthetics were also made.

  13. Operator Station Design System - A computer aided design approach to work station layout

    NASA Technical Reports Server (NTRS)

    Lewis, J. L.

    1979-01-01

    The Operator Station Design System is resident in NASA's Johnson Space Center Spacecraft Design Division Performance Laboratory. It includes stand-alone minicomputer hardware and Panel Layout Automated Interactive Design and Crew Station Assessment of Reach software. The data base consists of the Shuttle Transportation System Orbiter Crew Compartment (in part), the Orbiter payload bay and remote manipulator (in part), and various anthropometric populations. The system is utilized to provide panel layouts, assess reach and vision, determine interference and fit problems early in the design phase, study design applications as a function of anthropometric and mission requirements, and to accomplish conceptual design to support advanced study efforts.

  14. Design-based approach to ethics in computer-aided diagnosis

    NASA Astrophysics Data System (ADS)

    Collmann, Jeff R.; Lin, Jyh-Shyan; Freedman, Matthew T.; Wu, Chris Y.; Hayes, Wendelin S.; Mun, Seong K.

    1996-04-01

    A design-based approach to ethical analysis examines how computer scientists, physicians and patients make and justify choices in designing, using and reacting to computer-aided diagnosis (CADx) systems. The basic hypothesis of this research is that values are embedded in CADx systems during all phases of their development, not just retrospectively imposed on them. This paper concentrates on the work of computer scientists and physicians as they attempt to resolve central technical questions in designing clinically functional CADx systems for lung cancer and breast cancer diagnosis. The work of Lo, Chan, Freedman, Lin, Wu and their colleagues provides the initial data on which this study is based. As these researchers seek to increase the rate of true positive classifications of detected abnormalities in chest radiographs and mammograms, they explore dimensions of the fundamental ethical principal of beneficence. The training of CADx systems demonstrates the key ethical dilemmas inherent in their current design.

  15. Computer-aided design of high-contact-ratio gears for minimum dynamic load and stress

    NASA Technical Reports Server (NTRS)

    Lin, Hsiang Hsi; Lee, Chinwai; Oswald, Fred B.; Townsend, Dennis P.

    1990-01-01

    A computer aided design procedure is presented for minimizing dynamic effects on high contact ratio gears by modification of the tooth profile. Both linear and parabolic tooth profile modifications of high contact ratio gears under various loading conditions are examined and compared. The effects of the total amount of modification and the length of the modification zone were systematically studied at various loads and speeds to find the optimum profile design for minimizing the dynamic load and the tooth bending stress. Parabolic profile modification is preferred over linear profile modification for high contact ratio gears because of its lower sensitivity to manufacturing errors. For parabolic modification, a greater amount of modification at the tooth tip and a longer modification zone are required. Design charts are presented for high contact ratio gears with various profile modifications operating under a range of loads. A procedure is illustrated for using the charts to find the optimum profile design.

  16. Breaking the Glass Ceiling: Increasing the Meaningful Involvement of Women Living With HIV/AIDS (MIWA) in the Design and Delivery of HIV/AIDS Services.

    PubMed

    Carter, Allison; Greene, Saara; Nicholson, Valerie; O'Brien, Nadia; Sanchez, Margarite; de Pokomandy, Alexandra; Loutfy, Mona; Kaida, Angela

    2015-01-01

    The meaningful involvement of women living with HIV/AIDS (MIWA) is a key feature of women-centred HIV care, yet little is known about transforming MIWA from principle to practice. Drawing on focus group data from the Canadian HIV Women's Sexual and Reproductive Health Cohort Study (CHIWOS), we explored HIV-positive women's meaningful involvement in the design and delivery of HIV/AIDS services in British Columbia, Canada. In this article, we highlight the benefits and tensions that emerge as women traverse multiple roles as service users and service providers within their care communities, and the impact this has on their access to care and overall health.

  17. Crew aiding and automation: A system concept for terminal area operations, and guidelines for automation design

    NASA Technical Reports Server (NTRS)

    Dwyer, John P.

    1994-01-01

    This research and development program comprised two efforts: the development of guidelines for the design of automated systems, with particular emphasis on automation design that takes advantage of contextual information, and the concept-level design of a crew aiding system, the Terminal Area Navigation Decision Aiding Mediator (TANDAM). This concept outlines a system capable of organizing navigation and communication information and assisting the crew in executing the operations required in descent and approach. In service of this endeavor, problem definition activities were conducted that identified terminal area navigation and operational familiarization exercises addressing the terminal area navigation problem. Both airborne and ground-based (ATC) elements of aircraft control were extensively researched. The TANDAM system concept was then specified, and the crew interface and associated systems described. Additionally, three descent and approach scenarios were devised in order to illustrate the principal functions of the TANDAM system concept in relation to the crew, the aircraft, and ATC. A plan for the evaluation of the TANDAM system was established. The guidelines were developed based on reviews of relevant literature, and on experience gained in the design effort.

  18. 77 FR 71600 - Medicare Program; Request for Information To Aid in the Design and Development of a Survey...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-03

    ... HUMAN SERVICES Centers for Medicare & Medicaid Services Medicare Program; Request for Information To Aid in the Design and Development of a Survey Regarding Patient Experiences With Emergency Department Care AGENCY: Centers for Medicare & Medicaid Services (CMS), HHS. ACTION: Request for...

  19. Lithium-ion batteries for hearing aid applications: I. Design and performance

    NASA Astrophysics Data System (ADS)

    Passerini, S.; Owens, B. B.; Coustier, F.

    Rechargeable batteries have been designed for powering hearing aid devices (HAD). The cells, based on the lithium-ion chemistry, were designed in a size that is compatible with the existing HAD. The 10 mA h batteries were tested to characterize the design and the electrochemical performance from the point of view of a typical HAD application. Results are presented for constant-current tests, first-cycle conditions, charge voltage cut-off, rate performance, and cycle life. The pulse capabilities and the preliminary safety tests of the batteries will be presented in a following report. The results of the lithium-ion HAD cells developed in this project are compared with other battery chemistries: lithium-alloy and nickel-metal hydride secondary batteries and Zn-air primary batteries.

  20. Computer aided design of digital controller for radial active magnetic bearings

    NASA Technical Reports Server (NTRS)

    Cai, Zhong; Shen, Zupei; Zhang, Zuming; Zhao, Hongbin

    1992-01-01

    A five degree of freedom Active Magnetic Bearing (AMB) system is developed which is controlled by digital controllers. The model of the radial AMB system is linearized and the state equation is derived. Based on the state variables feedback theory, digital controllers are designed. The performance of the controllers are evaluated according to experimental results. The Computer Aided Design (CAD) method is used to design controllers for magnetic bearings. The controllers are implemented with a digital signal processing (DSP) system. The control algorithms are realized with real-time programs. It is very easy to change the controller by changing or modifying the programs. In order to identify the dynamic parameters of the controlled magnetic system, a special experiment was carried out. Also, the online Recursive Least Squares (RLS) parameter identification method is studied. It can be realized with the digital controllers. Online parameter identification is essential for the realization of an adaptive controller.

  1. History and evolution of the pharmacophore concept in computer-aided drug design.

    PubMed

    Güner, Osman F

    2002-12-01

    With computer-aided drug design established as an integral part of the lead discovery and optimization process, pharmacophores have become a focal point for conceptualizing and understanding receptor-ligand interactions. In the structure-based design process, pharmacophores can be used to align molecules based on the three-dimensional arrangement of chemical features or to develop predictive models (e.g., 3D-QSAR) that correlate with the experimental activities of a given training set. Pharmacophores can be also used as search queries for retrieving potential leads from structural databases, for designing molecules with specific desired attributes, or as fingerprints for assessing similarity and diversity of molecules. This review article presents a historical perspective on the evolution and use of the pharmacophore concept in the pharmaceutical, biotechnology, and fragrances industry with published examples of how the technology has contributed and advanced the field. PMID:12470283

  2. Computer aided design of digital controller for radial active magnetic bearings

    NASA Astrophysics Data System (ADS)

    Cai, Zhong; Shen, Zupei; Zhang, Zuming; Zhao, Hongbin

    1992-05-01

    A five degree of freedom Active Magnetic Bearing (AMB) system is developed which is controlled by digital controllers. The model of the radial AMB system is linearized and the state equation is derived. Based on the state variables feedback theory, digital controllers are designed. The performance of the controllers are evaluated according to experimental results. The Computer Aided Design (CAD) method is used to design controllers for magnetic bearings. The controllers are implemented with a digital signal processing (DSP) system. The control algorithms are realized with real-time programs. It is very easy to change the controller by changing or modifying the programs. In order to identify the dynamic parameters of the controlled magnetic system, a special experiment was carried out. Also, the online Recursive Least Squares (RLS) parameter identification method is studied. It can be realized with the digital controllers. Online parameter identification is essential for the realization of an adaptive controller.

  3. Toward the computer-aided design of metal ion sequestering agents

    SciTech Connect

    Hay, Benjamin P.; Firman, Timothy K.; Lumetta, Gregg J.; Rapko, Brian M.; Garza, Priscilla A.; Sinkov, Sergei I.; Hutchison, James E.; Parks, Bevin W.; Gilbertson, Robert D.; Weakley, Timothy J R

    2004-07-14

    The concepts embodied in de novo structure-based drug design are being adapted for the computer-aided design of metal ion sequestering agents. This adaptation requires the development of methods for (i) generating candidate structures and (ii) evaluating and prioritizing these structures with respect to their binding affinity for a specific guest. This article summarizes recent progress in this area that includes the creation of a new computer software program, called HostDesigner, that can generate and evaluate millions of new molecular structures per minute on a desktop personal computer. Several methods for evaluating the degree of binding site organization in a host structure are presented. An example is provided to demonstrate how these methods have been used to identify ligand architectures that provide enhanced metal ion binding affinity.

  4. Large Advanced Space Systems (LASS) computer-aided design program additions

    NASA Technical Reports Server (NTRS)

    Farrell, C. E.

    1982-01-01

    The LSS preliminary and conceptual design requires extensive iteractive analysis because of the effects of structural, thermal, and control intercoupling. A computer aided design program that will permit integrating and interfacing of required large space system (LSS) analyses is discussed. The primary objective of this program is the implementation of modeling techniques and analysis algorithms that permit interactive design and tradeoff studies of LSS concepts. Eight software modules were added to the program. The existing rigid body controls module was modified to include solar pressure effects. The new model generator modules and appendage synthesizer module are integrated (interfaced) to permit interactive definition and generation of LSS concepts. The mass properties module permits interactive specification of discrete masses and their locations. The other modules permit interactive analysis of orbital transfer requirements, antenna primary beam n, and attitude control requirements.

  5. Computer aided process planning and die design in simulation environment in sheet metal forming

    NASA Astrophysics Data System (ADS)

    Tisza, Miklós; Lukács, Zsolt

    2013-12-01

    During the recent 10-15 years, Computer Aided Process Planning and Die Design evolved as one of the most important engineering tools in sheet metal forming, particularly in the automotive industry. This emerging role is strongly emphasized by the rapid development of Finite Element Modeling, as well. The purpose of this paper is to give a general overview about the recent achievements in this very important field of sheet metal forming and to introduce some special results in this development activity. Therefore, in this paper, an integrated process simulation and die design system developed at the University of Miskolc, Department of Mechanical Engineering will be analyzed. The proposed integrated solutions have great practical importance to improve the global competitiveness of sheet metal forming in the very important segment of industry. The concept described in this paper may have specific value both for process planning and die design engineers.

  6. [A computer-aided design assessment system for recovery life support technology options].

    PubMed

    Chen, J; Wang, F; Sun, J; Shang, C

    1997-04-01

    A specific computer-aided decision support system was designed and implemented for design computation and decision assessment of environmental control and life support system of manned space station. An advanced multiobjective decision methodology and a hierarchic structure model of assessment index of recovery life support system was developed. The program incorporates a database for each technology option, metabolic design loads associated with crew activity, mission model variables to accommodate evolving mission requirements, and algorithms to produce products criteria in order to provide recommendations relative to candidate technology selection and development. A specific structure was developed for the decision system which consists of a database, a methodology base and a model base as well as their management systems. Moreover, a centre control system with friendly user interface plays a very important role in the man-computer interaction.

  7. ACSYNT - A standards-based system for parametric, computer aided conceptual design of aircraft

    NASA Technical Reports Server (NTRS)

    Jayaram, S.; Myklebust, A.; Gelhausen, P.

    1992-01-01

    A group of eight US aerospace companies together with several NASA and NAVY centers, led by NASA Ames Systems Analysis Branch, and Virginia Tech's CAD Laboratory agreed, through the assistance of Americal Technology Initiative, in 1990 to form the ACSYNT (Aircraft Synthesis) Institute. The Institute is supported by a Joint Sponsored Research Agreement to continue the research and development in computer aided conceptual design of aircraft initiated by NASA Ames Research Center and Virginia Tech's CAD Laboratory. The result of this collaboration, a feature-based, parametric computer aided aircraft conceptual design code called ACSYNT, is described. The code is based on analysis routines begun at NASA Ames in the early 1970's. ACSYNT's CAD system is based entirely on the ISO standard Programmer's Hierarchical Interactive Graphics System and is graphics-device independent. The code includes a highly interactive graphical user interface, automatically generated Hermite and B-Spline surface models, and shaded image displays. Numerous features to enhance aircraft conceptual design are described.

  8. RETRACTED: Auricular prosthesis fabrication using computer-aided design and rapid prototyping technologies.

    PubMed

    Shah, Mayank

    2016-06-01

    At the request of the editorMayank Shah 'Auricular prosthesis fabrication using computer-aided design and rapid prototyping technologies' Prosthetics and Orthotics International, published online before print on October 8, 2013 as doi:10.1177/0309364613504779has been retracted. This is because it contains unattributed overlap withK. Subburaj, C. Nair, S. Rajesh, S. M. Meshram, B. Ravi 'Rapid development of auricular prosthesis using CAD and rapid prototyping technologies' International Journal of Oral & Maxillofacial Surgery 2007; 36: 938-943 doi:10.1016/j.ijom.2007.07.013.

  9. Mechanical Design Technology--Modified. (Computer Assisted Drafting, Computer Aided Design). Curriculum Grant 84/85.

    ERIC Educational Resources Information Center

    Schoolcraft Coll., Livonia, MI.

    This document is a curriculum guide for a program in mechanical design technology (computer-assisted drafting and design developed at Schoolcraft College, Livonia, Michigan). The program helps students to acquire the skills of drafters and to interact with electronic equipment, with the option of becoming efficient in the computer-aided…

  10. User's manual: Computer-aided design programs for inductor-energy-storage dc-to-dc electronic power converters

    NASA Technical Reports Server (NTRS)

    Huffman, S.

    1977-01-01

    Detailed instructions on the use of two computer-aided-design programs for designing the energy storage inductor for single winding and two winding dc to dc converters are provided. Step by step procedures are given to illustrate the formatting of user input data. The procedures are illustrated by eight sample design problems which include the user input and the computer program output.

  11. Accelerating Design of Batteries Using Computer-Aided Engineering Tools (Presentation)

    SciTech Connect

    Pesaran, A.; Kim, G. H.; Smith, K.

    2010-11-01

    Computer-aided engineering (CAE) is a proven pathway, especially in the automotive industry, to improve performance by resolving the relevant physics in complex systems, shortening the product development design cycle, thus reducing cost, and providing an efficient way to evaluate parameters for robust designs. Academic models include the relevant physics details, but neglect engineering complexities. Industry models include the relevant macroscopic geometry and system conditions, but simplify the fundamental physics too much. Most of the CAE battery tools for in-house use are custom model codes and require expert users. There is a need to make these battery modeling and design tools more accessible to end users such as battery developers, pack integrators, and vehicle makers. Developing integrated and physics-based CAE battery tools can reduce the design, build, test, break, re-design, re-build, and re-test cycle and help lower costs. NREL has been involved in developing various models to predict the thermal and electrochemical performance of large-format cells and has used in commercial three-dimensional finite-element analysis and computational fluid dynamics to study battery pack thermal issues. These NREL cell and pack design tools can be integrated to help support the automotive industry and to accelerate battery design.

  12. Current Status of Computer-Aided Drug Design for Type 2 Diabetes

    PubMed Central

    Bibi, Shabana; Sakata, Katsumi

    2016-01-01

    Background Diabetes is a metabolic disorder that requires multiple therapeutic approaches. The pancreas loses its functionality to properly produce the insulin hormone in patients with diabetes mellitus. In 2012, more than one million people worldwide died as a result of diabetes, which was the eighth leading cause of death. Objective Most drugs currently available and approved by the U.S. Food and Drug Administration cannot reach an adequate level of glycemic control in diabetic patients, and have many side effects; thus, new classes of compounds are required. Efforts based on computer-aided drug design (CADD) can mine a large number of databases to produce new and potent hits and minimize the requirement of time and dollars for new discoveries. Methods Pharmaceutical sciences have made progress with advances in drug design concepts. Virtual screening of large databases is most compatible with different computational methods such as molecular docking, pharmacophore, quantitative structure-activity relationship, and molecular dynamic simulation. Contribution of these methods in selection of antidiabetic compounds has been discussed. Results The Computer-Aided Drug Design (CADD) approach has contributed to successful discovery of novel anti-diabetic agents. This mini-review focuses on CADD approach on currently approved drugs and new therapeutic agents-in-development that may achieve suitable glucose levels and decrease the risk of hypoglycemia, which is a major obstacle to glucose control and a special concern for therapies that increase insulin levels. Conclusion Drug design and development for type 2 diabetes have been actively studied. However, a large number of antidiabetic drugs are still in early stages of development. The conventional target- and structure-based approaches can be regarded as part of the efforts toward therapeutic mechanism-based drug design for treatment of type 2 diabetes. It is expected that further improvement in CADD approach will

  13. Computer-aided analysis and design of the shape rolling process for producing turbine engine airfoils

    NASA Technical Reports Server (NTRS)

    Lahoti, G. D.; Akgerman, N.; Altan, T.

    1978-01-01

    Mild steel (AISI 1018) was selected as model cold-rolling material and Ti-6Al-4V and INCONEL 718 were selected as typical hot-rolling and cold-rolling alloys, respectively. The flow stress and workability of these alloys were characterized and friction factor at the roll/workpiece interface was determined at their respective working conditions by conducting ring tests. Computer-aided mathematical models for predicting metal flow and stresses, and for simulating the shape-rolling process were developed. These models utilize the upper-bound and the slab methods of analysis, and are capable of predicting the lateral spread, roll-separating force, roll torque and local stresses, strains and strain rates. This computer-aided design (CAD) system is also capable of simulating the actual rolling process and thereby designing roll-pass schedule in rolling of an airfoil or similar shape. The predictions from the CAD system were verified with respect to cold rolling of mild steel plates. The system is being applied to cold and hot isothermal rolling of an airfoil shape, and will be verified with respect to laboratory experiments under controlled conditions.

  14. Computer-aided Molecular Design of Compounds Targeting Histone Modifying Enzymes

    PubMed Central

    Andreoli, Federico; Del Rio, Alberto

    2015-01-01

    Growing evidences show that epigenetic mechanisms play crucial roles in the genesis and progression of many physiopathological processes. As a result, research in epigenetic grew at a fast pace in the last decade. In particular, the study of histone post-translational modifications encountered an extraordinary progression and many modifications have been characterized and associated to fundamental biological processes and pathological conditions. Histone modifications are the catalytic result of a large set of enzyme families that operate covalent modifications on specific residues at the histone tails. Taken together, these modifications elicit a complex and concerted processing that greatly contribute to the chromatin remodeling and may drive different pathological conditions, especially cancer. For this reason, several epigenetic targets are currently under validation for drug discovery purposes and different academic and industrial programs have been already launched to produce the first pre-clinical and clinical outcomes. In this scenario, computer-aided molecular design techniques are offering important tools, mainly as a consequence of the increasing structural information available for these targets. In this mini-review we will briefly discuss the most common types of known histone modifications and the corresponding operating enzymes by emphasizing the computer-aided molecular design approaches that can be of use to speed-up the efforts to generate new pharmaceutically relevant compounds. PMID:26082827

  15. Computer-aided Molecular Design of Compounds Targeting Histone Modifying Enzymes.

    PubMed

    Andreoli, Federico; Del Rio, Alberto

    2015-01-01

    Growing evidences show that epigenetic mechanisms play crucial roles in the genesis and progression of many physiopathological processes. As a result, research in epigenetic grew at a fast pace in the last decade. In particular, the study of histone post-translational modifications encountered an extraordinary progression and many modifications have been characterized and associated to fundamental biological processes and pathological conditions. Histone modifications are the catalytic result of a large set of enzyme families that operate covalent modifications on specific residues at the histone tails. Taken together, these modifications elicit a complex and concerted processing that greatly contribute to the chromatin remodeling and may drive different pathological conditions, especially cancer. For this reason, several epigenetic targets are currently under validation for drug discovery purposes and different academic and industrial programs have been already launched to produce the first pre-clinical and clinical outcomes. In this scenario, computer-aided molecular design techniques are offering important tools, mainly as a consequence of the increasing structural information available for these targets. In this mini-review we will briefly discuss the most common types of known histone modifications and the corresponding operating enzymes by emphasizing the computer-aided molecular design approaches that can be of use to speed-up the efforts to generate new pharmaceutically relevant compounds.

  16. Design and implementation of a bluetooth-based band-aid pulse rate sensor

    NASA Astrophysics Data System (ADS)

    Kumar, Prashanth S.; Oh, Sechang; Rai, Pratyush; Kwon, Hyeokjun; Banerjee, Nilanjan; Varadan, Vijay K.

    2011-04-01

    Remote patient monitoring systems capable of collecting vital patient data such as blood pressure readings, Electrocardiograph (ECG) waveforms, and heart rate can obviate the need for repeated visits to the hospital. Moreover, such systems that continuously monitor the human physiology can provide valuable data to prognosticate the onset of critical health problems. The key to such remote health diagnostics is the design of minimally intrusive, low cost sensors that do not impede a patient's quotidian life but at the same time collect reliable noise free data. To this end, in this paper, we design and implement a Bluetooth-based wireless sensor system with a disposable sensor element and a reusable wireless component that can be worn as a "band-aid". The sensor is a piezoelectric polymer film placed on the wrist in proximity to the radial artery. The band-aid sized sensor allows non-intrusive monitoring of the pulsatile flow of blood in the artery. The sensor, using the Bluetooth module, can communicate with any Bluetooth enabled computer, mobile phone, or PDA. The data collected from the patient can be remotely viewed and analyzed by a physician.

  17. A computer-aided design system geared toward conceptual design in a research environment. [for hypersonic vehicles

    NASA Technical Reports Server (NTRS)

    STACK S. H.

    1981-01-01

    A computer-aided design system has recently been developed specifically for the small research group environment. The system is implemented on a Prime 400 minicomputer linked with a CDC 6600 computer. The goal was to assign the minicomputer specific tasks, such as data input and graphics, thereby reserving the large mainframe computer for time-consuming analysis codes. The basic structure of the design system consists of GEMPAK, a computer code that generates detailed configuration geometry from a minimum of input; interface programs that reformat GEMPAK geometry for input to the analysis codes; and utility programs that simplify computer access and data interpretation. The working system has had a large positive impact on the quantity and quality of research performed by the originating group. This paper describes the system, the major factors that contributed to its particular form, and presents examples of its application.

  18. Designing optimal transportation networks: a knowledge-based computer-aided multicriteria approach

    SciTech Connect

    Tung, S.I.

    1986-01-01

    The dissertation investigates the applicability of using knowledge-based expert systems (KBES) approach to solve the single-mode (automobile), fixed-demand, discrete, multicriteria, equilibrium transportation-network-design problem. Previous works on this problem has found that mathematical programming method perform well on small networks with only one objective. Needed is a solution technique that can be used on large networks having multiple, conflicting criteria with different relative importance weights. The KBES approach developed in this dissertation represents a new way to solve network design problems. The development of an expert system involves three major tasks: knowledge acquisition, knowledge representation, and testing. For knowledge acquisition, a computer aided network design/evaluation model (UFOS) was developed to explore the design space. This study is limited to the problem of designing an optimal transportation network by adding and deleting capacity increments to/from any link in the network. Three weighted criteria were adopted for use in evaluating each design alternative: cost, average V/C ratio, and average travel time.

  19. LIFESPAN: A tool for the computer-aided design of longitudinal studies

    PubMed Central

    Brandmaier, Andreas M.; von Oertzen, Timo; Ghisletta, Paolo; Hertzog, Christopher; Lindenberger, Ulman

    2015-01-01

    Researchers planning a longitudinal study typically search, more or less informally, a multivariate space of possible study designs that include dimensions such as the hypothesized true variance in change, indicator reliability, the number and spacing of measurement occasions, total study time, and sample size. The main search goal is to select a research design that best addresses the guiding questions and hypotheses of the planned study while heeding applicable external conditions and constraints, including time, money, feasibility, and ethical considerations. Because longitudinal study selection ultimately requires optimization under constraints, it is amenable to the general operating principles of optimization in computer-aided design. Based on power equivalence theory (MacCallum et al., 2010; von Oertzen, 2010), we propose a computational framework to promote more systematic searches within the study design space. Starting with an initial design, the proposed framework generates a set of alternative models with equal statistical power to detect hypothesized effects, and delineates trade-off relations among relevant parameters, such as total study time and the number of measurement occasions. We present LIFESPAN (Longitudinal Interactive Front End Study Planner), which implements this framework. LIFESPAN boosts the efficiency, breadth, and precision of the search for optimal longitudinal designs. Its initial version, which is freely available at http://www.brandmaier.de/lifespan, is geared toward the power to detect variance in change as specified in a linear latent growth curve model. PMID:25852596

  20. Computer aided design and manufacturing of composite propfan blades for a cruise missile wind tunnel model

    NASA Technical Reports Server (NTRS)

    Thorp, Scott A.; Downey, Kevin M.

    1992-01-01

    One of the propulsion concepts being investigated for future cruise missiles is advanced unducted propfans. To support the evaluation of this technology applied to the cruise missile, a joint DOD and NASA test project was conducted to design and then test the characteristics of the propfans on a 0.55-scale, cruise missile model in a NASA wind tunnel. The configuration selected for study is a counterrotating rearward swept propfan. The forward blade row, having six blades, rotates in a counterclockwise direction, and the aft blade row, having six blades, rotates in a clockwise direction, as viewed from aft of the test model. Figures show the overall cruise missile and propfan blade configurations. The objective of this test was to evaluate propfan performance and suitability as a viable propulsion option for next generation of cruise missiles. This paper details the concurrent computer aided design, engineering, and manufacturing of the carbon fiber/epoxy propfan blades as the NASA Lewis Research Center.

  1. Computer-aided design system with artificial intelligence for automatic dimensioning

    SciTech Connect

    Huang, R.; Juricic, D.

    1995-12-31

    This paper is concerned with the methodology applicable to automating computer drafting tasks of a Computer-Aided Drafting and Design (CADD) system. One of the main characteristics of these tasks is the need for interaction with geometric models and their features. The specific drafting task considered in this paper was dimensioning of a multiview drawing. The paper illustrates the approach used and describes the introduction of relevant knowledge base as well as implementation of an inference engine internal to the drafting system. A simple class of objects was used to illustrate in more details the methods involved. It is noted that developing this methodology may be of vital importance for further automation of the drafting and design process.

  2. Interface load analysis for computer-aided design of below-knee prosthetic sockets.

    PubMed

    Reynolds, D P; Lord, M

    1992-07-01

    A finite-element analysis is made for the compression of soft tissues of the residual lower limb contained in a prosthetic socket. The analysis is relevant to static loading during stance in a patellar-tendon-bearing, below-knee design of socket. Values of Young's modulus are obtained experimentally for use in the model. One of the main objectives is to study the sensitivity of the loading to these values and also to other assumed conditions. Using direct pressure at the limb/socket interface and vertical stiffness as indicators, changes in material properties, socket alignment and socket rectification are investigated; assumptions about the frictional characteristic at the interface are seen to be critical in determination of load distribution. This type of analysis may provide the next stage of refinement for computer-aided socket design systems.

  3. Using the Continuum of Design Modelling Techniques to Aid the Development of CAD Modeling Skills in First Year Industrial Design Students

    ERIC Educational Resources Information Center

    Storer, I. J.; Campbell, R. I.

    2012-01-01

    Industrial Designers need to understand and command a number of modelling techniques to communicate their ideas to themselves and others. Verbal explanations, sketches, engineering drawings, computer aided design (CAD) models and physical prototypes are the most commonly used communication techniques. Within design, unlike some disciplines,…

  4. Computer-Aided Molecular Design of Bis-phosphine Oxide Lanthanide Extractants

    DOE PAGES

    McCann, Billy W.; Silva, Nuwan De; Windus, Theresa L.; Gordon, Mark S.; Moyer, Bruce A.; Bryantsev, Vyacheslav S.; Hay, Benjamin P.

    2016-02-17

    Computer-aided molecular design and high-throughput screening of viable host architectures can significantly reduce the efforts in the design of novel ligands for efficient extraction of rare earth elements. This paper presents a computational approach to the deliberate design of bis-phosphine oxide host architectures that are structurally organized for complexation of trivalent lanthanides. Molecule building software, HostDesigner, was interfaced with molecular mechanics software, PCModel, providing a tool for generating and screening millions of potential R2(O)P-link-P(O)R2 ligand geometries. The molecular mechanics ranking of ligand structures is consistent with both the solution-phase free energies of complexation obtained with density functional theory and themore » performance of known bis-phosphine oxide extractants. For the case where link is -CH2-, evaluation of the ligand geometry provides the first characterization of a steric origin for the ‘anomalous aryl strengthening’ effect. The design approach has identified a number of novel bis-phosphine oxide ligands that are better organized for lanthanide complexation than previously studied examples.« less

  5. Computer-Aided Molecular Design of Bis-phosphine Oxide Lanthanide Extractants.

    PubMed

    McCann, Billy W; Silva, Nuwan De; Windus, Theresa L; Gordon, Mark S; Moyer, Bruce A; Bryantsev, Vyacheslav S; Hay, Benjamin P

    2016-06-20

    Computer-aided molecular design and high-throughput screening of viable host architectures can significantly reduce the efforts in the design of novel ligands for efficient extraction of rare earth elements. This paper presents a computational approach to the deliberate design of bis-phosphine oxide host architectures that are structurally organized for complexation of trivalent lanthanides. Molecule building software, HostDesigner, was interfaced with molecular mechanics software, PCModel, providing a tool for generating and screening millions of potential R2(O)P-link-P(O)R2 ligand geometries. The molecular mechanics ranking of ligand structures is consistent with both the solution-phase free energies of complexation obtained with density functional theory and the performance of known bis-phosphine oxide extractants. For the case where the link is -CH2-, evaluation of the ligand geometry provides the first characterization of a steric origin for the "anomalous aryl strengthening" effect. The design approach has identified a number of novel bis-phosphine oxide ligands that are better organized for lanthanide complexation than previously studied examples.

  6. Development of the engineering design integration (EDIN) system: A computer aided design development

    NASA Technical Reports Server (NTRS)

    Glatt, C. R.; Hirsch, G. N.

    1977-01-01

    The EDIN (Engineering Design Integration) System which provides a collection of hardware and software, enabling the engineer to perform man-in-the-loop interactive evaluation of aerospace vehicle concepts, was considered. Study efforts were concentrated in the following areas: (1) integration of hardware with the Univac Exec 8 System; (2) development of interactive software for the EDIN System; (3) upgrading of the EDIN technology module library to an interactive status; (4) verification of the soundness of the developing EDIN System; (5) support of NASA in design analysis studies using the EDIN System; (6) provide training and documentation in the use of the EDIN System; and (7) provide an implementation plan for the next phase of development and recommendations for meeting long range objectives.

  7. An overlooked yet ubiquitous fluoride congenitor: binding bifluoride in triazolophanes using computer-aided design.

    PubMed

    Ramabhadran, Raghunath O; Liu, Yun; Hua, Yuran; Ciardi, Moira; Flood, Amar H; Raghavachari, Krishnan

    2014-04-01

    Despite its ubiquity during the binding and sensing of fluoride, the role of bifluoride (HF2(-)) and its binding properties are almost always overlooked. Here, we give one of the first examinations of bifluoride recognition in which we use computer-aided design to modify the cavity shape of triazolophanes to better match with HF2(-). Computational investigation indicates that HF2(-) and Cl(-) should have similar binding affinities to the parent triazolophane in the gas phase. Evaluation of the binding geometries revealed a preference for binding of the linear HF2(-) along the north-south axis with a smaller Boltzmann weighted population aligned east-west and all states being accessed rapidly through in-plane precessional rotations of the anion. While the (1)H NMR spectroscopy studies are consistent with the calculated structural aspects, binding affinities in solution were determined to be significantly smaller for the bifluoride than the chloride. Computed geometries suggested that a 20° tilting of the bifluoride (stemming from the cavity size) could account for the 25-fold difference between the two binding affinities, HF2(-) < Cl(-). Structural variations to the triazolophane's geometry and electronic modifications to the network of hydrogen bond donors were subsequently screened in a stepwise manner using density functional theory calculations to yield a final design that eliminates the tilting. Correspondingly, the bifluoride's binding affinity (K ∼ 10(6) M(-1)) increased and was also found to remain equal to chloride in the gas and solution phases. The new oblate cavity appeared to hold the HF2(-) in a single east-west arrangement. Our findings demonstrate the promising ability of computer-aided design to fine-tune the structural and electronic match in anion receptors as a means to control the arrangement and binding strength of a desired guest.

  8. Experiences in control system design aided by interactive computer programs: temperature control of the laser isotope separation vessel

    SciTech Connect

    Gavel, D.T.; Pittenger, L.C.; McDonald, J.S.; Cramer, P.G.; Herget, C.J.

    1985-01-01

    A robust control system has been designed to regulate temperature in a vacuum vessel. The thermodynamic process is modeled by a set of nonlinear, implicit differential equations. The control design and analysis task exercised many of the computer-aided control systems design software packages, including MATLAB, DELIGHT, and LSAP. The working environment is a VAX computer. Advantages and limitations of the software and environment, and the impact on final controller design is discussed.

  9. Design and fabrication of an optimum peripheral region for low gain avalanche detectors

    NASA Astrophysics Data System (ADS)

    Fernández-Martínez, Pablo; Flores, D.; Hidalgo, S.; Greco, V.; Merlos, A.; Pellegrini, G.; Quirion, D.

    2016-06-01

    Low Gain Avalanche Detectors (LGAD) represent a remarkable advance in high energy particle detection, since they provide a moderate increase (gain ~10) of the collected charge, thus leading to a notable improvement of the signal-to-noise ratio, which largely extends the possible application of Silicon detectors beyond their present working field. The optimum detection performance requires a careful implementation of the multiplication junction, in order to obtain the desired gain on the read out signal, but also a proper design of the edge termination and the peripheral region, which prevents the LGAD detectors from premature breakdown and large leakage current. This work deals with the critical technological aspects required to optimize the LGAD structure. The impact of several design strategies for the device periphery is evaluated with the aid of TCAD simulations, and compared with the experimental results obtained from the first LGAD prototypes fabricated at the IMB-CNM clean room. Solutions for the peripheral region improvement are also provided.

  10. Use of CADD (Computer Aided Drafting and Design) in a construction setting

    SciTech Connect

    Ketcham, D.L.

    1988-01-01

    At the outset of the design for the Defense Waste Processing Facility (DWPF) it was determined to complete over 70 percent of the more than 7000 drawings on a Computer Aided Drafting and Design (CADD) system. This ambitious goal required the development of an integrated data base for plant design software systems to service a multi-discipline, engineering and management environment for the complex one-of-a-kind mega project. The implementation involved extensive training, special accounting and security provisions to meet QA requirements. It was found to be effective to train engineers as well as operators so that technical personnel could have direct access to the drawing files. This was particularly useful when designing and laying out close tolerance equipment in remotely maintained cells where clearances are critical. It was also beneficial to have the terminals located in the same areas as the engineering staff. Background drawings were maintained by one discipline and used as a reference file by the other disciplines. This reduced the chances of interferences and insured that the latest revisions were in use. 2 figs.

  11. VIP: A knowledge-based design aid for the engineering of space systems

    NASA Technical Reports Server (NTRS)

    Lewis, Steven M.; Bellman, Kirstie L.

    1990-01-01

    The Vehicles Implementation Project (VIP), a knowledge-based design aid for the engineering of space systems is described. VIP combines qualitative knowledge in the form of rules, quantitative knowledge in the form of equations, and other mathematical modeling tools. The system allows users rapidly to develop and experiment with models of spacecraft system designs. As information becomes available to the system, appropriate equations are solved symbolically and the results are displayed. Users may browse through the system, observing dependencies and the effects of altering specific parameters. The system can also suggest approaches to the derivation of specific parameter values. In addition to providing a tool for the development of specific designs, VIP aims at increasing the user's understanding of the design process. Users may rapidly examine the sensitivity of a given parameter to others in the system and perform tradeoffs or optimizations of specific parameters. A second major goal of VIP is to integrate the existing corporate knowledge base of models and rules into a central, symbolic form.

  12. Computer-aided design and computer-aided manufacture (CAD/CAM) system for construction of spinal orthosis for patients with adolescent idiopathic scoliosis.

    PubMed

    Wong, M S

    2011-01-01

    ABSTRACT Spinal orthoses are commonly prescribed to patients with moderate adolescent idiopathic scoliosis (AIS) for prevention of further curve deterioration. In conventional manufacturing method, plaster bandages are used to obtain the patient's body contour and then the plaster cast is rectified manually. With computer-aided design and computer-aided manufacture (CAD/CAM) system, a series of automated processes from body scanning to digital rectification and milling of the positive model can be performed in a fast and accurate fashion. The purpose of this manuscript is to introduce the application of CAD/CAM system to the construction of spinal orthosis for patients with AIS. Based on evidence within the literature, CAD/CAM method can achieve similar clinical outcomes but with higher efficiency than the conventional fabrication method. Therefore, CAD/CAM method should be considered a substitute to the conventional method in fabrication of spinal orthoses for patients with AIS.

  13. Microcomputed tomography marginal fit evaluation of computer-aided design/computer-aided manufacturing crowns with different methods of virtual model acquisition.

    PubMed

    das Neves, Flavio Domingues; do Prado, Celio Jesus; Prudente, Marcel Santana; Carneiro, Thiago Almeida Prado Naves; Zancope, Karla; Davi, Leticia Resende; Mendonca, Gustavo; Cooper, Lyndon; Soares, Carlos Jose

    2015-01-01

    This in vitro study used microcomputed tomography to evaluate the marginal fit of crowns fabricated using a chairside computer-aided design/computer-aided manufacturing (CAD/CAM) system with different methods of virtual model acquisition. Crowns were fabricated to fit in a cast containing a single human premolar. Four methods of virtual model acquisition were used: Group 1 (control), digital impressioning of a typodont; Group 2, digital impressioning of a powdered typodont; Group 3, digital impressioning of a regular impression; and Group 4, digital impressioning of a master cast. Statistically significant differences were found between the marginal gap of Group 2 and the other groups (P < 0.05); no differences were found among Groups 1, 3, and 4. The results showed that crowns fabricated using the chairside CAD/CAM system exhibited significantly smaller vertical misfit when a thin layer of powder was applied over the typodont before digital impressioning.

  14. [Computer aided design and manufacture of the porcelain fused to metal crown].

    PubMed

    Nie, Xin; Cheng, Xiaosheng; Dai, Ning; Yu, Qing; Hao, Guodong; Sun, Quanping

    2009-04-01

    In order to satisfy the current demand for fast and high-quality prosthodontics, we have carried out a research in the fabrication process of the porcelain fused to metal crown on molar with CAD/CAM technology. Firstly, we get the data of the surface mesh on preparation teeth through a 3D-optical grating measuring system. Then, we reconstruct the 3D-model crown with the computer-aided design software which was developed by ourselves. Finally, with the 3D-model data, we produce a metallic crown on a high-speed CNC carving machine. The result has proved that the metallic crown can match the preparation teeth ideally. The fabrication process is reliable and efficient, and the restoration is precise and steady in quality. PMID:19499776

  15. Computer aided solar house design made of ``Guadua`` in Bogota, Colombia

    SciTech Connect

    Lozano, M.C.; Chalfoun, N.V.

    1995-11-01

    Bogota, Colombia, is the third highest capital in South America, its location near the equator assures high altitudes over the horizon and almost 5 hours of daily mean sunshine. Since 1981, efforts for using natural energy instead of nonrenewable fuel have been targeted to Colombia`s residential construction industry. This paper focuses on a computer aided design process for passive solar low-income row housing in Bogota. Thermal comfort for this tropical climate has been achieved through employing ``Guadua,`` a strong bamboo specie,as an alternative wall system to the traditional brick, adobe, or concrete structures. Through computer analysis, several energy conservation and passive solar strategies have been optimized for a case study row housing type common to the region. The load savings compared to a 6 inch CMU house totaled 72%, while the operating cost has been reduced by 71%. Furthermore, this lightweight and inexpensive ``Guadua`` material has reduced the construction cost by 30%.

  16. Validation of space/ground antenna control algorithms using a computer-aided design tool

    NASA Technical Reports Server (NTRS)

    Gantenbein, Rex E.

    1995-01-01

    The validation of the algorithms for controlling the space-to-ground antenna subsystem for Space Station Alpha is an important step in assuring reliable communications. These algorithms have been developed and tested using a simulation environment based on a computer-aided design tool that can provide a time-based execution framework with variable environmental parameters. Our work this summer has involved the exploration of this environment and the documentation of the procedures used to validate these algorithms. We have installed a variety of tools in a laboratory of the Tracking and Communications division for reproducing the simulation experiments carried out on these algorithms to verify that they do meet their requirements for controlling the antenna systems. In this report, we describe the processes used in these simulations and our work in validating the tests used.

  17. Selection and implementation of a computer aided design and drafting (CAD/D) system

    SciTech Connect

    Davis, J.P.

    1981-01-01

    Faced with very heavy workloads and limited engineering and graphics personnel, Transco opted for a computer-aided design and drafting system that can produce intelligent drawings, which have associated data bases that can be integrated with other graphical and nongraphical data bases to form comprehensive sets of data for construction projects. Because so much time was being spent in all phases of materials and inventory control, Transco decided to integrate materials-management capabilities into the CAD/D system. When a specific item of material is requested on the graphics equipment, the request triggers production of both the drawing and a materials list. Transco plans to extend its computer applications into mapping tasks as well.

  18. Facility management of computer-aided design, drafting/manufacturing systems (CADD/M)

    SciTech Connect

    Norton, F.J.

    1980-09-23

    Interactive Computer-Aided Design Drafting/Manufacturing systems have been installed in thousands of companies, applying CADD/M capabilities to many applications. This has been done with varying degrees of success even among companies with identical applications. Investigation of individual companies reveals a gap between the capabilities of CADD/M systems and the actual usage by industry of those capabilities. This company usage often determines the degree of success or failure of an interactive graphics facility and is largely controlled by management. The responsibilities of the interactive graphics facility managemant team are explained in detail. Proper management of a CADD/M facility is more critical to the success or failure of the facility than any other factor.

  19. Cost justification for an interactive Computer-Aided Design Drafting/Manufacturing system

    SciTech Connect

    Norton, F.J.

    1980-09-23

    Many factors influence the capital investment decision. System costs and benefits are weighed by methods of financial analysis to determine the advisability of an investment. Capital, expense, and benefits as related to Interactive Computer-Aided Design Drafting/Manufacturing (CADD/M) Systems are discussed and model calculations are included. An example is treated by the simple payback method and the more sophisticated methods of Net Present Value (NPV) and Internal Rate of Return (IRR). The NPV and IRR approaches include in the calculation the time value of money and provide a sounder foundation on which to base the purchase decision. It is hoped that an understanding of these techniques by technical personnel will make an optimum system purchase more likely.

  20. Prospective on multiscale simulation of virus-like particles: Application to computer-aided vaccine design.

    PubMed

    Abi Mansour, Andrew; Sereda, Yuriy V; Yang, Jing; Ortoleva, Peter J

    2015-11-01

    Simulations of virus-like particles needed for computer-aided vaccine design highlight the need for new algorithms that accelerate molecular dynamics. Such simulations via conventional molecular dynamics present a practical challenge due to the millions of atoms involved and the long timescales of the phenomena of interest. These phenomena include structural transitions, self-assembly, and interaction with a cell surface. A promising approach for addressing this challenge is multiscale factorization. The approach is distinct from coarse-graining techniques in that it (1) avoids the need for conjecturing phenomenological governing equations for coarse-grained variables, (2) provides simulations with atomic resolution, (3) captures the cross-talk between disturbances at the atomic and the whole virus-like particle scale, and (4) achieves significant speedup over molecular dynamics. A brief review of multiscale factorization method is provided, as is a prospective on its development.

  1. Harnessing Polypharmacology with Computer-Aided Drug Design and Systems Biology.

    PubMed

    Wathieu, Henri; Issa, Naiem T; Byers, Stephen W; Dakshanamurthy, Sivanesan

    2016-01-01

    The ascent of polypharmacology in drug development has many implications for disease therapy, most notably in the efforts of drug discovery, drug repositioning, precision medicine and combination therapy. The single- target approach to drug development has encountered difficulties in predicting drugs that are both clinically efficacious and avoid toxicity. By contrast, polypharmacology offers the possibility of a controlled distribution of effects on a biological system. This review addresses possibilities and bottlenecks in the efficient computational application of polypharmacology. The two major areas we address are the discovery and prediction of multiple protein targets using the tools of computer-aided drug design, and the use of these protein targets in predicting therapeutic potential in the context of biological networks. The successful application of polypharmacology to systems biology and pharmacology has the potential to markedly accelerate the pace of development of novel therapies for multiple diseases, and has implications for the intellectual property landscape, likely requiring targeted changes in patent law. PMID:26907947

  2. Molecular structure descriptors in the computer-aided design of biologically active compounds

    NASA Astrophysics Data System (ADS)

    Raevsky, Oleg A.

    1999-06-01

    The current state of description of molecular structure in computer-aided molecular design of biologically active compounds by means of descriptors is analysed. The information contents of descriptors increases in the following sequence: element-level descriptors-structural formulae descriptors-electronic structure descriptors-molecular shape descriptors-intermolecular interaction descriptors. Each subsequent class of descriptors normally covers information contained in the previous-level ones. It is emphasised that it is practically impossible to describe all the features of a molecular structure in terms of any single class of descriptors. It is recommended to optimise the number of descriptors used by means of appropriate statistical procedures and characteristics of structure-property models based on these descriptors. The bibliography includes 371 references.

  3. Harnessing Polypharmacology with Computer-Aided Drug Design and Systems Biology.

    PubMed

    Wathieu, Henri; Issa, Naiem T; Byers, Stephen W; Dakshanamurthy, Sivanesan

    2016-01-01

    The ascent of polypharmacology in drug development has many implications for disease therapy, most notably in the efforts of drug discovery, drug repositioning, precision medicine and combination therapy. The single- target approach to drug development has encountered difficulties in predicting drugs that are both clinically efficacious and avoid toxicity. By contrast, polypharmacology offers the possibility of a controlled distribution of effects on a biological system. This review addresses possibilities and bottlenecks in the efficient computational application of polypharmacology. The two major areas we address are the discovery and prediction of multiple protein targets using the tools of computer-aided drug design, and the use of these protein targets in predicting therapeutic potential in the context of biological networks. The successful application of polypharmacology to systems biology and pharmacology has the potential to markedly accelerate the pace of development of novel therapies for multiple diseases, and has implications for the intellectual property landscape, likely requiring targeted changes in patent law.

  4. Alzheimer's disease drug development based on Computer-Aided Drug Design.

    PubMed

    Zeng, Huahui; Wu, Xiangxiang

    2016-10-01

    Alzheimer's disease (AD) is a common neurodegenerative disorder characterized by the excessive deposition of amyloids in the brain. The pathological features mainly include the extracellular amyloid plaques and intracellular neurofibrillary tangles, which are the production of amyloid precursor protein (APP) processed by the α-, β- and γ-secretases. Based on the amyloid cascade hypotheses of AD, a large number of amyloid-β agents and secretase inhibitors against AD have been recently developed by using computational methods. This review article describes pathophysiology of AD and the structure of the Aβ plaques, β- and γ-secretases, and discusses the recent advances in the development of the amyloid agents for AD therapy and diagnosis by using Computer-Aided Drug Design approach.

  5. Effectiveness of using CADD (Computer-Aided Design Drafting) to learn engineering design graphics

    SciTech Connect

    Bertoline, G.R.

    1987-01-01

    One commercial CADD software and one educational CADD software was compared to the use of traditional tools. Engineering-graphics students were divided into three groups. The control group used traditional tools for all their drawings. One experimental group used a commercial CADD software to supplement hand tools and one group used an educational CADD software to supplement traditional tools. These groups were then post-tested using a standardized drafting test. The main findings were: (1) There was no significant difference in the learning of engineering graphics as measured by the post-tests. Supplementing traditional tools with CADD is effective for teaching engineering design graphics. (2) Using CADD for detail drawings such as simple orthographic drawings, sections, and dimensions could be produced in approximately the same amount of time as using traditional tools. (3) It was found that the amount of time needed to solve descriptive geometry problems using CADD was prohibitive. The amount of time to solve some descriptive geometry problems was two or three times greater using CADD versus traditional tools.

  6. Design, development, and evaluation of visual aids for communicating prescription drug instructions to nonliterate patients in rural Cameroon.

    PubMed

    Ngoh, L N; Shepherd, M D

    1997-03-01

    In this study, culturally sensitive visual aids designed to help convey drug information to nonliterate female adults who had a prescription for a solid oral dosage form of antibiotic medications were developed and evaluated. The researchers conceptualized the educational messages while a local artist produced the visual aids. Seventy-eight female ambulatory patients were evaluated for comprehension and compliance with antibiotic prescription instructions. The study was conducted in three health centers in Cameroon, West Africa and followed a pre-test, post-test, and follow-up format for three groups: two experimental, and one control. All participants were randomly assigned to either experimental or control groups, 26 patients to each group. Subjects in the experimental groups received visual aids alone or visual aids plus an Advanced Organizer. A comparison of the three groups showed that subjects in the experimental groups scored significantly higher than the control group in both the comprehension and compliance measures.

  7. e-LEA3D: a computational-aided drug design web server.

    PubMed

    Douguet, Dominique

    2010-07-01

    e-LEA3D web server integrates three complementary tools to perform computer-aided drug design based on molecular fragments. In drug discovery projects, there is a considerable interest in identifying novel and diverse molecular scaffolds to enhance chances of success. The de novo drug design tool is used to invent new ligands to optimize a user-specified scoring function. The composite scoring function includes both structure- and ligand-based evaluations. The de novo approach is an alternative to a blind virtual screening of large compound collections. A heuristic based on a genetic algorithm rapidly finds which fragments or combination of fragments fit a QSAR model or the binding site of a protein. While the approach is ideally suited for scaffold-hopping, this module also allows a scan for possible substituents to a user-specified scaffold. The second tool offers a traditional virtual screening and filtering of an uploaded library of compounds. The third module addresses the combinatorial library design that is based on a user-drawn scaffold and reactants coming, for example, from a chemical supplier. The e-LEA3D server is available at: http://bioinfo.ipmc.cnrs.fr/lea.html.

  8. e-LEA3D: a computational-aided drug design web server

    PubMed Central

    Douguet, Dominique

    2010-01-01

    e-LEA3D web server integrates three complementary tools to perform computer-aided drug design based on molecular fragments. In drug discovery projects, there is a considerable interest in identifying novel and diverse molecular scaffolds to enhance chances of success. The de novo drug design tool is used to invent new ligands to optimize a user-specified scoring function. The composite scoring function includes both structure- and ligand-based evaluations. The de novo approach is an alternative to a blind virtual screening of large compound collections. A heuristic based on a genetic algorithm rapidly finds which fragments or combination of fragments fit a QSAR model or the binding site of a protein. While the approach is ideally suited for scaffold-hopping, this module also allows a scan for possible substituents to a user-specified scaffold. The second tool offers a traditional virtual screening and filtering of an uploaded library of compounds. The third module addresses the combinatorial library design that is based on a user-drawn scaffold and reactants coming, for example, from a chemical supplier. The e-LEA3D server is available at: http://bioinfo.ipmc.cnrs.fr/lea.html. PMID:20444867

  9. Visualization and modeling of factors influencing visibility in computer-aided crewstation design

    NASA Technical Reports Server (NTRS)

    Arditi, Aries; Azueta, Steven; Larimer, James; Prevost, Michael; Lubin, Jeffrey; Bergen, James

    1992-01-01

    We have developed two modules for use in computer-aided design (CAD) of crewstation environments that enhance the designer's appreciation of factors influencing the pilot's vision and visual processing capacity. The Binocular Optics Module (BOM) is an interactive tool for visualizing geometric aspects of (1) how retinal imagery of the environment changes on the pilot's retinas under conditions of eye and object motion, and (2) how visual capabilities that can be modeled as regions or contours on the retinas, affect spatial perception of the environment. The Visual Performance Module (VPM) contains a signal processing model of human visual discrimination that quantitatively predicts visual discrimination performance. The outputs of the VPM are retinal contours that represent performance probabilities. These contours may be used as inputs to the BOM for visualizing those volumes of space within the crewstation that bound different levels of the pilot's of visual discrimination capability. Used together, the BOM and VPM provide the designer with the opportunity to interactively explore relationships between environmental retinal imagery and visual function, and the ability to factor the pilot's visual capabilities into the earliest phases of crewstation CAD.

  10. Interactive computer aided design of electric machines and electromagnetic apparatus (invited)

    NASA Astrophysics Data System (ADS)

    Freeman, E. M.

    1982-11-01

    The design of electromagnetic devices in industry is still largely done using traditional techniques. Early computing facilities were costly to use and limited to alphanumeric applications. The application of numerical methods, mainly finite elements, to the solution of electromagnetic field problems, proved to be difficult to implement initially due to input/output problems. These difficulties were completely obviated by the advent of inexpensive microcomputers and low cost interactive graphics. However, it is still uncommon to find these new methods being employed as part of the normal electrical design process. Meanwhile, in parallel, there has been a massive growth of computer-aided methods applied to all aspects of mechanical engineering design and drafting, CADCAM. The trend is towards small, powerful, expandable, dedicated computer systems equipped with high resolution interactive graphics, which can be connected via a fast datalink. These are commonly available, complete with software, as turnkey systems. The advantages of CADCAM are manifold: Lower costs, higher productivity, higher quality products, with shorter lead times. The introduction of CADCAM will result in organisational as well as technical changes. The major change will be in the way people think.

  11. Computer-aided rational design of the phosphotransferase system for enhanced glucose uptake in Escherichia coli.

    PubMed

    Nishio, Yousuke; Usuda, Yoshihiro; Matsui, Kazuhiko; Kurata, Hiroyuki

    2008-01-01

    The phosphotransferase system (PTS) is the sugar transportation machinery that is widely distributed in prokaryotes and is critical for enhanced production of useful metabolites. To increase the glucose uptake rate, we propose a rational strategy for designing the molecular architecture of the Escherichia coli glucose PTS by using a computer-aided design (CAD) system and verified the simulated results with biological experiments. CAD supports construction of a biochemical map, mathematical modeling, simulation, and system analysis. Assuming that the PTS aims at controlling the glucose uptake rate, the PTS was decomposed into hierarchical modules, functional and flux modules, and the effect of changes in gene expression on the glucose uptake rate was simulated to make a rational strategy of how the gene regulatory network is engineered. Such design and analysis predicted that the mlc knockout mutant with ptsI gene overexpression would greatly increase the specific glucose uptake rate. By using biological experiments, we validated the prediction and the presented strategy, thereby enhancing the specific glucose uptake rate.

  12. Investigation into the development of computer aided design software for space based sensors

    NASA Technical Reports Server (NTRS)

    Pender, C. W.; Clark, W. L.

    1987-01-01

    The described effort is phase one of the development of a Computer Aided Design (CAD) software to be used to perform radiometric sensor design. The software package will be referred to as SCAD and is directed toward the preliminary phase of the design of space based sensor system. The approach being followed is to develop a modern, graphic intensive, user friendly software package using existing software as building blocks. The emphasis will be directed toward the development of a shell containing menus, smart defaults, and interfaces, which can accommodate a wide variety of existing application software packages. The shell will offer expected utilities such as graphics, tailored menus, and a variety of drivers for I/O devices. Following the development of the shell, the development of SCAD is planned as chiefly selection and integration of appropriate building blocks. The phase one development activities have included: the selection of hardware which will be used with SCAD; the determination of the scope of SCAD; the preliminary evaluation of a number of software packages for applicability to SCAD; determination of a method for achieving required capabilities where voids exist; and then establishing a strategy for binding the software modules into an easy to use tool kit.

  13. Selecting and implementing an interactive Computer Aided Design Drafting/Manufacturing (CADD/M) system

    SciTech Connect

    Norton, F.J.

    1980-09-23

    Success with Interactive Computer-Aided Design Drafting/Manufacturing (CADD/M) depends upon management, users, and the system itself. If you are in a design and drafting environment, the thought of acquiring a CADD/M system will probably occur to you sometime in the very near future - if it hasn't already. Convincing yourself and your management of the benefits of such systems is but the first step. Evaluating and selecting one particular type of CADD/M system can turn out to be a complicated undertaking - not to mention somewhat frustrating. Procedures for selecting and successfully implementing a CADD/M system are outlined. INITIAL PREPARATION examines the techniques used to evaluate CADD/M systems including formation of an evaluation team, and application analysis. GRAPHICS EVALUATION describes the methods that can be used to test a CADD/M system, including benchmark drawings and specifications, human engineering considerations, and other evaluation criteria and general system configurations are also discussed. COMPUTER SYSTEM EVALUATION examines other factors in systems selection: programming, communications, documentation, and service. SYSTEM STARTUP addresses site preparation, people preparation, system acceptance, and operator, designer/drafter selection. Finally, operator, designer/drafter TRAINING and SYSTEM MANAGEMENT are discussed. This systematic approach wil help those contemplating the acquisition of CADD/M systems for their activities and will help minimize unplanned events and problem areas.Advanced planning in these areas is needed to ensure successful implementation of a CADD/M system. This in turn will lead to considerable cost savings and schedule improvements for an entire project, from initial design to final production. These are ambitious goals but easily realized if a logical and rational plan is adopted in the same manner as that used in a typical development program.

  14. Custom-Made Computer-Aided-Design/Computer-Aided-Manufacturing Biphasic Calcium-Phosphate Scaffold for Augmentation of an Atrophic Mandibular Anterior Ridge

    PubMed Central

    Mangano, Francesco Guido; van Noort, Ric; Apresyan, Samvel; Piattelli, Adriano; Macchi, Aldo

    2015-01-01

    This report documents the clinical, radiographic, and histologic outcome of a custom-made computer-aided-design/computer-aided-manufactured (CAD/CAM) scaffold used for the alveolar ridge augmentation of a severely atrophic anterior mandible. Computed tomographic (CT) images of an atrophic anterior mandible were acquired and modified into a 3-dimensional (3D) reconstruction model; this was transferred to a CAD program, where a custom-made scaffold was designed. CAM software generated a set of tool-paths for the manufacture of the scaffold on a computer-numerical-control milling machine into the exact shape of the 3D design. A custom-made scaffold was milled from a synthetic micromacroporous biphasic calcium phosphate (BCP) block. The scaffold closely matched the shape of the defect: this helped to reduce the time for the surgery and contributed to good healing. One year later, newly formed and well-integrated bone was clinically available, and two implants (AnyRidge, MegaGen, Gyeongbuk, South Korea) were placed. The histologic samples retrieved from the implant sites revealed compact mature bone undergoing remodelling, marrow spaces, and newly formed trabecular bone surrounded by residual BCP particles. This study demonstrates that custom-made scaffolds can be fabricated by combining CT scans and CAD/CAM techniques. Further studies on a larger sample of patients are needed to confirm these results. PMID:26064701

  15. Computer-aided roll pass design in rolling of airfoil shapes

    NASA Technical Reports Server (NTRS)

    Akgerman, N.; Lahoti, G. D.; Altan, T.

    1980-01-01

    This paper describes two computer-aided design (CAD) programs developed for modeling the shape rolling process for airfoil sections. The first program, SHPROL, uses a modular upper-bound method of analysis and predicts the lateral spread, elongation, and roll torque. The second program, ROLPAS, predicts the stresses, roll separating force, the roll torque and the details of metal flow by simulating the rolling process, using the slab method of analysis. ROLPAS is an interactive program; it offers graphic display capabilities and allows the user to interact with the computer via a keyboard, CRT, and a light pen. The accuracy of the computerized models was evaluated by (a) rolling a selected airfoil shape at room temperature from 1018 steel and isothermally at high temperature from Ti-6Al-4V, and (b) comparing the experimental results with computer predictions. The comparisons indicated that the CAD systems, described here, are useful for practical engineering purposes and can be utilized in roll pass design and analysis for airfoil and similar shapes.

  16. Computer-aided design drafting/manufacturing (CADD/M) facility preparation

    SciTech Connect

    Norton, F.J.

    1980-09-23

    Computer-Aided Design, Drafting and Manufacturing (CADD/M) equipment requires careful facilities preparation before installation takes place. This paper presents what a company should consider to ensure a proper installation. This includes consideration of working conditions. To get the most out of the system, the operators must be provided with a relaxed, comfortable environment, free from noise and other distractions. Such things as temperature requirements, lighting, power, security and fire protection are discussed. Also, future expansion needs are considered so that major construction will not be required for future years. Advanced planning in these areas is needed to ensure successful implementation of a CADD/M system. This will lead to considerable cost savings, and in the long run, improve the scheduling for an entire project, from initial design to final production. This careful preparation will minimize unplanned events and problem areas. These are ambitious goals but easily realized if a logical and rational plan is adopted in the same manner as that used in a typical development program.

  17. Computer-aided design of dry powder inhalers using computational fluid dynamics to assess performance.

    PubMed

    Suwandecha, Tan; Wongpoowarak, Wibul; Srichana, Teerapol

    2016-01-01

    Dry powder inhalers (DPIs) are gaining popularity for the delivery of drugs. A cost effective and efficient delivery device is necessary. Developing new DPIs by modifying an existing device may be the simplest way to improve the performance of the devices. The aim of this research was to produce a new DPIs using computational fluid dynamics (CFD). The new DPIs took advantages of the Cyclohaler® and the Rotahaler®. We chose a combination of the capsule chamber of the Cyclohaler® and the mouthpiece and grid of the Rotahaler®. Computer-aided design models of the devices were created and evaluated using CFD. Prototype models were created and tested with the DPI dispersion experiments. The proposed model 3 device had a high turbulence with a good degree of deagglomeration in the CFD and the experiment data. The %fine particle fraction (FPF) was around 50% at 60 L/min. The mass median aerodynamic diameter was around 2.8-4 μm. The FPF were strongly correlated to the CFD-predicted turbulence and the mechanical impaction parameters. The drug retention in the capsule was only 5-7%. In summary, a simple modification of the Cyclohaler® and Rotahaler® could produce a better performing inhaler using the CFD-assisted design.

  18. Computer-Aided Design of Liquid Crystals: A Mean Field Approach

    NASA Astrophysics Data System (ADS)

    Weider, Titus; Glaser, Matthew A.; Clark, Noel A.

    1997-08-01

    The directed design of soft materials is challenging owing to their complex structure and interactions. A promising strategy for the modeling of organic materials involves the replacement of the explicit condensed phase environment of a molecule or group of molecules by an effective mean field potential. We have created mean field theory-based methods for the routine pre-synthesis prediction of materials properties of liquid crystals, including phase behavior, linear and nonlinear optical properties, and spontaneous polarization density. These methods are semi-empirical in the sense that they rely on experimental data (e.g. from NMR or FTIR measurements) for the development of transferable mean field potentials capable of yielding quantitative predictions for novel materials. Our calculations involve detailed quantum chemical studies of conformational energy surfaces and evaluation of statistical averages by exact enumeration (within an RIS approximation) or importance sampling (for fully flexible molecular models). This strategy appears to have great promise, and represents perhaps the only viable approach to computer-aided design of liquid crystalline materials.

  19. NEXUS/NASCAD- NASA ENGINEERING EXTENDIBLE UNIFIED SOFTWARE SYSTEM WITH NASA COMPUTER AIDED DESIGN

    NASA Technical Reports Server (NTRS)

    Purves, L. R.

    1994-01-01

    NEXUS, the NASA Engineering Extendible Unified Software system, is a research set of computer programs designed to support the full sequence of activities encountered in NASA engineering projects. This sequence spans preliminary design, design analysis, detailed design, manufacturing, assembly, and testing. NEXUS primarily addresses the process of prototype engineering, the task of getting a single or small number of copies of a product to work. Prototype engineering is a critical element of large scale industrial production. The time and cost needed to introduce a new product are heavily dependent on two factors: 1) how efficiently required product prototypes can be developed, and 2) how efficiently required production facilities, also a prototype engineering development, can be completed. NEXUS extendibility and unification are achieved by organizing the system as an arbitrarily large set of computer programs accessed in a common manner through a standard user interface. The NEXUS interface is a multipurpose interactive graphics interface called NASCAD (NASA Computer Aided Design). NASCAD can be used to build and display two and three-dimensional geometries, to annotate models with dimension lines, text strings, etc., and to store and retrieve design related information such as names, masses, and power requirements of components used in the design. From the user's standpoint, NASCAD allows the construction, viewing, modification, and other processing of data structures that represent the design. Four basic types of data structures are supported by NASCAD: 1) three-dimensional geometric models of the object being designed, 2) alphanumeric arrays to hold data ranging from numeric scalars to multidimensional arrays of numbers or characters, 3) tabular data sets that provide a relational data base capability, and 4) procedure definitions to combine groups of system commands or other user procedures to create more powerful functions. NASCAD has extensive abilities to

  20. A method of computer aided design with self-generative models in NX Siemens environment

    NASA Astrophysics Data System (ADS)

    Grabowik, C.; Kalinowski, K.; Kempa, W.; Paprocka, I.

    2015-11-01

    Currently in CAD/CAE/CAM systems it is possible to create 3D design virtual models which are able to capture certain amount of knowledge. These models are especially useful in an automation of routine design tasks. These models are known as self-generative or auto generative and they can behave in an intelligent way. The main difference between the auto generative and fully parametric models consists in the auto generative models ability to self-organizing. In this case design model self-organizing means that aside from the possibility of making of automatic changes of model quantitative features these models possess knowledge how these changes should be made. Moreover they are able to change quality features according to specific knowledge. In spite of undoubted good points of self-generative models they are not so often used in design constructional process which is mainly caused by usually great complexity of these models. This complexity makes the process of self-generative time and labour consuming. It also needs a quite great investment outlays. The creation process of self-generative model consists of the three stages it is knowledge and information acquisition, model type selection and model implementation. In this paper methods of the computer aided design with self-generative models in NX Siemens CAD/CAE/CAM software are presented. There are the five methods of self-generative models preparation in NX with: parametric relations model, part families, GRIP language application, knowledge fusion and OPEN API mechanism. In the paper examples of each type of the self-generative model are presented. These methods make the constructional design process much faster. It is suggested to prepare this kind of self-generative models when there is a need of design variants creation. The conducted research on assessing the usefulness of elaborated models showed that they are highly recommended in case of routine tasks automation. But it is still difficult to distinguish

  1. A flexible computer aid for conceptual design based on constraint propagation and component-modeling. [of aircraft in three dimensions

    NASA Technical Reports Server (NTRS)

    Kolb, Mark A.

    1988-01-01

    The Rubber Airplane program, which combines two symbolic processing techniques with a component-based database of design knowledge, is proposed as a computer aid for conceptual design. Using object-oriented programming, programs are organized around the objects and behavior to be simulated, and using constraint propagation, declarative statements designate mathematical relationships among all the equation variables. It is found that the additional level of organizational structure resulting from the arrangement of the design information in terms of design components provides greater flexibility and convenience.

  2. Designing of a Digital Behind-the-Ear Hearing Aid to Meet the World Health Organization Requirements

    PubMed Central

    Bento, Ricardo Ferreira; Penteado, Silvio Pires

    2010-01-01

    Hearing loss is a common health issue that affects nearly 10% of the world population as indicated by many international studies. The hearing impaired typically experience more frustration, anxiety, irritability, depression, and disorientation than those with normal hearing levels. The standard rehabilitation tool for hearing impairment is an electronic hearing aid whose main components are transducers (microphone and receiver) and a digital signal processor. These electronic components are manufactured by supply chain rather than by hearing aid manufacturers. Manufacturers can use custom-designed components or generic off-the-shelf components. These electronic components are available as application-specific or off-the-shelf products, with the former designed for a specific manufacturer and the latter for a generic approach. The choice of custom or generic components will affect the product specifications, pricing, manufacturing, life cycle, and marketing strategies of the product. The World Health Organization is interested in making available to developing countries hearing aids that are inexpensive to purchase and maintain. The hearing aid presented in this article was developed with these specifications in mind together with additional contemporary features such as four channels with wide dynamic range compression, an adjustable compression rate for each channel, four comfort programs, an adaptive feedback manager, and full volume control. This digital hearing aid is fitted using a personal computer with minimal hardware requirements in intuitive three-step fitting software. A trimmer-adjusted version can be developed where human and material resources are scarce. PMID:20724354

  3. Designing of a digital behind-the-ear hearing aid to meet the World Health Organization requirements.

    PubMed

    Bento, Ricardo Ferreira; Penteado, Silvio Pires

    2010-06-01

    Hearing loss is a common health issue that affects nearly 10% of the world population as indicated by many international studies. The hearing impaired typically experience more frustration, anxiety, irritability, depression, and disorientation than those with normal hearing levels. The standard rehabilitation tool for hearing impairment is an electronic hearing aid whose main components are transducers (microphone and receiver) and a digital signal processor. These electronic components are manufactured by supply chain rather than by hearing aid manufacturers. Manufacturers can use custom-designed components or generic off-the-shelf components. These electronic components are available as application-specific or off-the-shelf products, with the former designed for a specific manufacturer and the latter for a generic approach. The choice of custom or generic components will affect the product specifications, pricing, manufacturing, life cycle, and marketing strategies of the product. The World Health Organization is interested in making available to developing countries hearing aids that are inexpensive to purchase and maintain. The hearing aid presented in this article was developed with these specifications in mind together with additional contemporary features such as four channels with wide dynamic range compression, an adjustable compression rate for each channel, four comfort programs, an adaptive feedback manager, and full volume control. This digital hearing aid is fitted using a personal computer with minimal hardware requirements in intuitive three-step fitting software. A trimmer-adjusted version can be developed where human and material resources are scarce.

  4. Designing of a digital behind-the-ear hearing aid to meet the World Health Organization requirements.

    PubMed

    Bento, Ricardo Ferreira; Penteado, Silvio Pires

    2010-06-01

    Hearing loss is a common health issue that affects nearly 10% of the world population as indicated by many international studies. The hearing impaired typically experience more frustration, anxiety, irritability, depression, and disorientation than those with normal hearing levels. The standard rehabilitation tool for hearing impairment is an electronic hearing aid whose main components are transducers (microphone and receiver) and a digital signal processor. These electronic components are manufactured by supply chain rather than by hearing aid manufacturers. Manufacturers can use custom-designed components or generic off-the-shelf components. These electronic components are available as application-specific or off-the-shelf products, with the former designed for a specific manufacturer and the latter for a generic approach. The choice of custom or generic components will affect the product specifications, pricing, manufacturing, life cycle, and marketing strategies of the product. The World Health Organization is interested in making available to developing countries hearing aids that are inexpensive to purchase and maintain. The hearing aid presented in this article was developed with these specifications in mind together with additional contemporary features such as four channels with wide dynamic range compression, an adjustable compression rate for each channel, four comfort programs, an adaptive feedback manager, and full volume control. This digital hearing aid is fitted using a personal computer with minimal hardware requirements in intuitive three-step fitting software. A trimmer-adjusted version can be developed where human and material resources are scarce. PMID:20724354

  5. Revision of Electro-Mechanical Drafting Program to Include CAD/D (Computer-Aided Drafting/Design). Final Report.

    ERIC Educational Resources Information Center

    Snyder, Nancy V.

    North Seattle Community College decided to integrate computer-aided design/drafting (CAD/D) into its Electro-Mechanical Drafting Program. This choice necessitated a redefinition of the program through new curriculum and course development. To initiate the project, a new industrial advisory council was formed. Major electronic and recruiting firms…

  6. Design, Development, Implementation, and Evaluation of the Computer Aided Interactive Testing System (CAITS). Focus on the Trained Person.

    ERIC Educational Resources Information Center

    1983

    This report describes the design, development, implementation, and evaluation of the Computer Aided Interactive Testing System (CAITS) and addresses the applicability of the system in the Naval Education and Training Command. In addition to an introduction (section one), the report contains four sections and three appendices. Section two describes…

  7. 78 FR 5458 - Medicare Program; Request for Information To Aid in the Design and Development of a Survey...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-25

    ... HUMAN SERVICES Centers for Medicare & Medicaid Services Medicare Program; Request for Information To Aid in the Design and Development of a Survey Regarding Patient and Family Member/Friend Experiences With Hospice Care AGENCY: Centers for Medicare & Medicaid Services (CMS), HHS. ACTION: Request for...

  8. 78 FR 5459 - Medicare Program; Request for Information To Aid in the Design and Development of a Survey...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-25

    ... HUMAN SERVICES Centers for Medicare & Medicaid Services Medicare Program; Request for Information To Aid in the Design and Development of a Survey Regarding Patient Experiences With Hospital Outpatient...: Request for information. SUMMARY: This document is a request for information regarding hospital...

  9. A systematic framework for computer-aided design of engineering rubber formulations

    NASA Astrophysics Data System (ADS)

    Ghosh, Prasenjeet

    This thesis considers the design of engineering rubber formulations, whose unique properties of elasticity and resilience enable diverse applications. Engineering rubber formulations are a complex mixture of different materials called curatives that includes elastomers, fillers, crosslinking agents, accelerators, activators, retarders, anti-oxidants and processing aids, where the amount of curatives must be adjusted for each application. The characterization of the final properties of the rubber in application is complex and depends on the chemical interplay between the different curatives in formulation via vulcanization chemistry. The details of the processing conditions and the thermal, deformational, and chemical environment encountered in application also have a pronounced effect on the performance of the rubber. Consequently, for much of the history of rubber as an engineering material, its recipe formulations have been developed largely by trial-and-error, rather than by a fundamental understanding. A computer-aided, systematic and automated framework for the design of such materials is proposed in this thesis. The framework requires the solution to two sub-problems: (a) the forward problem, which involves prediction of the desired properties when the formulation is known and (b) the inverse problem that requires identification of the appropriate formulation, given the desired target properties. As part of the forward model, the chemistry of accelerated sulfur vulcanization is reviewed that permits integration of the knowledge of the past five decades in the literature to answer some old questions, reconcile some of the contradicting mechanisms and present a holistic description of the governing chemistry. Based on this mechanistic chemistry, a fundamental kinetic model is derived using population balance equations. The model quantitatively describes, for the first time, the different aspects of vulcanization chemistry. Subsequently, a novel three

  10. Use of crop simulation modelling to aid ideotype design of future cereal cultivars.

    PubMed

    Rötter, R P; Tao, F; Höhn, J G; Palosuo, T

    2015-06-01

    A major challenge of the 21st century is to achieve food supply security under a changing climate and roughly a doubling in food demand by 2050 compared to present, the majority of which needs to be met by the cereals wheat, rice, maize, and barley. Future harvests are expected to be especially threatened through increased frequency and severity of extreme events, such as heat waves and drought, that pose particular challenges to plant breeders and crop scientists. Process-based crop models developed for simulating interactions between genotype, environment, and management are widely applied to assess impacts of environmental change on crop yield potentials, phenology, water use, etc. During the last decades, crop simulation has become important for supporting plant breeding, in particular in designing ideotypes, i.e. 'model plants', for different crops and cultivation environments. In this review we (i) examine the main limitations of crop simulation modelling for supporting ideotype breeding, (ii) describe developments in cultivar traits in response to climate variations, and (iii) present examples of how crop simulation has supported evaluation and design of cereal cultivars for future conditions. An early success story for rice demonstrates the potential of crop simulation modelling for ideotype breeding. Combining conventional crop simulation with new breeding methods and genetic modelling holds promise to accelerate delivery of future cereal cultivars for different environments. Robustness of model-aided ideotype design can further be enhanced through continued improvements of simulation models to better capture effects of extremes and the use of multi-model ensembles. PMID:25795739

  11. Prosthetic rehabilitation with an implant-supported fixed prosthesis using computer-aided design and computer-aided manufacturing dental technology for a patient with a mandibulectomy: A clinical report.

    PubMed

    Yoon, Hyung-In; Han, Jung-Suk

    2016-02-01

    The fabrication of dental prostheses with computer-aided design and computer-aided manufacturing shows acceptable marginal fits and favorable treatment outcomes. This clinical report describes the management of a patient who had undergone a mandibulectomy and received an implant-supported fixed prosthesis by using additive manufacturing for the framework and subtractive manufacturing for the monolithic zirconia restorations.

  12. An Analysis of Computer Aided Design (CAD) Packages Used at MSFC for the Recent Initiative to Integrate Engineering Activities

    NASA Technical Reports Server (NTRS)

    Smith, Leigh M.; Parker, Nelson C. (Technical Monitor)

    2002-01-01

    This paper analyzes the use of Computer Aided Design (CAD) packages at NASA's Marshall Space Flight Center (MSFC). It examines the effectiveness of recent efforts to standardize CAD practices across MSFC engineering activities. An assessment of the roles played by management, designers, analysts, and manufacturers in this initiative will be explored. Finally, solutions are presented for better integration of CAD across MSFC in the future.

  13. Does Merit Aid Program Design Matter? A Cross-Cohort Analysis

    ERIC Educational Resources Information Center

    Domina, Thurston

    2014-01-01

    Twenty-one US states currently offer some form of merit-based postsecondary financial aid, although the generosity and eligibility requirements of merit aid programs varies from state to state. This article uses nationally representative data from high school students in the early 1990s and the early 2000s to evaluate the relationship between the…

  14. Cultural Competence in a Group Intervention Designed for Latino Patients Living with HIV/AIDS

    ERIC Educational Resources Information Center

    Acevedo, Vanessa

    2008-01-01

    Although the trajectory of the HIV/AIDS epidemic has changed dramatically over the past 25 years, addressing the psychosocial needs of patients living with HIV/AIDS remains vital. Ensuring the effective delivery of services demands that interventions be rooted in cultural competence and aimed at vulnerable populations. This article describes a…

  15. Design of radial basis function neural network classifier realized with the aid of data preprocessing techniques: design and analysis

    NASA Astrophysics Data System (ADS)

    Oh, Sung-Kwun; Kim, Wook-Dong; Pedrycz, Witold

    2016-05-01

    In this paper, we introduce a new architecture of optimized Radial Basis Function neural network classifier developed with the aid of fuzzy clustering and data preprocessing techniques and discuss its comprehensive design methodology. In the preprocessing part, the Linear Discriminant Analysis (LDA) or Principal Component Analysis (PCA) algorithm forms a front end of the network. The transformed data produced here are used as the inputs of the network. In the premise part, the Fuzzy C-Means (FCM) algorithm determines the receptive field associated with the condition part of the rules. The connection weights of the classifier are of functional nature and come as polynomial functions forming the consequent part. The Particle Swarm Optimization algorithm optimizes a number of essential parameters needed to improve the accuracy of the classifier. Those optimized parameters include the type of data preprocessing, the dimensionality of the feature vectors produced by the LDA (or PCA), the number of clusters (rules), the fuzzification coefficient used in the FCM algorithm and the orders of the polynomials of networks. The performance of the proposed classifier is reported for several benchmarking data-sets and is compared with the performance of other classifiers reported in the previous studies.

  16. Computers in engineering 1983; Proceedings of the International Conference and Exhibit, Chicago, IL, August 7-11, 1983. Volume 1 - Computer-aided design, manufacturing, and simulation

    NASA Astrophysics Data System (ADS)

    Cokonis, T. J.

    The papers presented in this volume provide examples of the impact of computers on present engineering practice and indicate some future trends in computer-aided design, manufacturing, and simulation. Topics discussed include computer-aided design of turbine cycle configuration, managing and development of engineering computer systems, computer-aided manufacturing with robots in the automotive industry, and computer-aided design/analysis techniques of composite materials in the cure phase. Papers are also presented on computer simulation of vehicular propulsion systems, the performance of a hydraulic system simulator in a CAD environment, and computer simulation of hovercraft heave dynamics and control.

  17. Impact of computer-aided design and drafting on operator perceptions and performance intentions

    SciTech Connect

    Mandeville, D.E.

    1987-01-01

    The goal of the introduction of computer-aided design and drafting (CADD) technology is to improve engineering quantity and quality outcomes. What is not so obvious is that the manner in which the operator views the CADD job may affect these outcomes. The study found that: (1) the subjects hold job characteristic beliefs about their jobs that are similar to those held by individuals in related professional and technical positions in other organizations; (2) subjects in routine jobs who had little experience with CADD believe that the characteristics of the job with CADD will be less desirable than there present job utilizing manual drafting; however, experienced users believe that there is little difference; (3) the subjects performing technologically routine jobs indicate that quantity and quality of their jobs decreases with CADD, while holders of technologically nonroutine jobs indicate the opposite; (4) significant but weak relationships existed between job characteristic beliefs, attitudes, and job intentions; however, the model relationships and strengths varied when subgroups were analyzed; and (5) the correlation of social referent group beliefs with subject beliefs are significant but weak.

  18. Indications for Computer-Aided Design and Manufacturing in Congenital Craniofacial Reconstruction.

    PubMed

    Fisher, Mark; Medina, Miguel; Bojovic, Branko; Ahn, Edward; Dorafshar, Amir H

    2016-09-01

    The complex three-dimensional relationships in congenital craniofacial reconstruction uniquely lend themselves to the ability to accurately plan and model the result provided by computer-aided design and manufacturing (CAD/CAM). The goal of this study was to illustrate indications where CAD/CAM would be helpful in the treatment of congenital craniofacial anomalies reconstruction and to discuss the application of this technology and its outcomes. A retrospective review was performed of all congenital craniofacial cases performed by the senior author between 2010 and 2014. Cases where CAD/CAM was used were identified, and illustrative cases to demonstrate the benefits of CAD/CAM were selected. Preoperative appearance, computerized plan, intraoperative course, and final outcome were analyzed. Preoperative planning enabled efficient execution of the operative plan with predictable results. Risk factors which made these patients good candidates for CAD/CAM were identified and compiled. Several indications, including multisuture and revisional craniosynostosis, facial bipartition, four-wall box osteotomy, reduction cranioplasty, and distraction osteogenesis could benefit most from this technology. We illustrate the use of CAD/CAM for these applications and describe the decision-making process both before and during surgery. We explore why we believe that CAD/CAM is indicated in these scenarios as well as the disadvantages and risks. PMID:27516839

  19. Use of a Dementia Training Designed for Nurse Aides to Train Other Staff

    PubMed Central

    Irvine, A. Blair; Beaty, Jeff A.; Seeley, John R.; Bourgeois, Michelle

    2013-01-01

    Problematic resident behaviors may escalate in long-term care facilities (LTCs). If nurse aides (NAs) are not nearby, the nearest staff to intervene may be non-direct care workers (NDCWs), who have little or no dementia training. This pilot research tested Internet dementia-training program, designed for NAs, on NDCWs in a LTC setting. Sixty-eight NDCWs participated, filling out two baseline surveys at 1-month intervals and a posttest survey after training. The surveys included video-situation testing, items addressing psychosocial constructs associated with behavior change, and measures training-acceptance. Paired t tests showed significant positive effects on measures of knowledge, attitudes, self-efficacy, and behavioral intentions, with small-moderate effect sizes. Nursing staff as well as non–health care workers showed improved scores, and the web-site training program was well received by all participants. These results suggest that Internet training may allow staff development coordinators to conserve limited resources by cross-training of different job categories with the same program. PMID:25364097

  20. AIDS Clinical Trials Group Longitudinal Linked Randomized Trials (ALLRT): Rationale, Design, and Baseline Characteristics

    PubMed Central

    Smurzynski, Marlene; Collier, Ann C.; Koletar, Susan L.; Bosch, Ronald J.; Wu, Kunling; Bastow, Barbara; Benson, Constance A.

    2009-01-01

    Purpose ALLRT is a longitudinal cohort study of HIV-infected subjects prospectively randomized into selected clinical trials for antiretroviral (ARV) treatment-naïve and ARV treatment-experienced individuals conducted by the AIDS Clinical Trials Group (ACTG). We describe the rationale, design, and baseline characteristics of the ALLRT cohort and its potential to address important research questions related to ARV therapy. Method Standardized visits occur every 16 weeks to evaluate long-term clinical, virologic, and immunologic outcomes associated with ARV treatment. Results A total of 4,371 subjects enrolled in ALLRT from January 2000 through June 2007. Of these, 3,146 (72%) were ARV naïve at parent study entry (18% female, 44% white, 32% black, 21% Hispanic; median age 37 years, CD4 count 218 cells/μL, follow-up 3.6 years; 343 [11%] followed ≥8 years) and 1,225 (28%) were treatment experienced (13% female, 59% white, 20% black, 17% Hispanic; median age 42 years, CD4 count 325 cells/μL, follow-up 5.7 years). Conclusions ALLRT provides the opportunity to understand long-term ramifications of therapeutic ARV choices and determine whether these vary by treatment regimen, timing of treatment initiation, or treatment changes over long-term follow-up. Investigations based on uniform data and specimen collection in the context of randomized ARV treatments will be critical to developing more successful long-term therapeutic strategies for HIV treatment. PMID:18753121

  1. Validation of RetroPath, a computer-aided design tool for metabolic pathway engineering.

    PubMed

    Fehér, Tamás; Planson, Anne-Gaëlle; Carbonell, Pablo; Fernández-Castané, Alfred; Grigoras, Ioana; Dariy, Ekaterina; Perret, Alain; Faulon, Jean-Loup

    2014-11-01

    Metabolic engineering has succeeded in biosynthesis of numerous commodity or high value compounds. However, the choice of pathways and enzymes used for production was many times made ad hoc, or required expert knowledge of the specific biochemical reactions. In order to rationalize the process of engineering producer strains, we developed the computer-aided design (CAD) tool RetroPath that explores and enumerates metabolic pathways connecting the endogenous metabolites of a chassis cell to the target compound. To experimentally validate our tool, we constructed 12 top-ranked enzyme combinations producing the flavonoid pinocembrin, four of which displayed significant yields. Namely, our tool queried the enzymes found in metabolic databases based on their annotated and predicted activities. Next, it ranked pathways based on the predicted efficiency of the available enzymes, the toxicity of the intermediate metabolites and the calculated maximum product flux. To implement the top-ranking pathway, our procedure narrowed down a list of nine million possible enzyme combinations to 12, a number easily assembled and tested. One round of metabolic network optimization based on RetroPath output further increased pinocembrin titers 17-fold. In total, 12 out of the 13 enzymes tested in this work displayed a relative performance that was in accordance with its predicted score. These results validate the ranking function of our CAD tool, and open the way to its utilization in the biosynthesis of novel compounds.

  2. The Design and Evaluation of "CAPTools"--A Computer Aided Parallelization Toolkit

    NASA Technical Reports Server (NTRS)

    Yan, Jerry; Frumkin, Michael; Hribar, Michelle; Jin, Haoqiang; Waheed, Abdul; Johnson, Steve; Cross, Jark; Evans, Emyr; Ierotheou, Constantinos; Leggett, Pete; Saini, Subhash (Technical Monitor)

    1998-01-01

    Writing applications for high performance computers is a challenging task. Although writing code by hand still offers the best performance, it is extremely costly and often not very portable. The Computer Aided Parallelization Tools (CAPTools) are a toolkit designed to help automate the mapping of sequential FORTRAN scientific applications onto multiprocessors. CAPTools consists of the following major components: an inter-procedural dependence analysis module that incorporates user knowledge; a 'self-propagating' data partitioning module driven via user guidance; an execution control mask generation and optimization module for the user to fine tune parallel processing of individual partitions; a program transformation/restructuring facility for source code clean up and optimization; a set of browsers through which the user interacts with CAPTools at each stage of the parallelization process; and a code generator supporting multiple programming paradigms on various multiprocessors. Besides describing the rationale behind the architecture of CAPTools, the parallelization process is illustrated via case studies involving structured and unstructured meshes. The programming process and the performance of the generated parallel programs are compared against other programming alternatives based on the NAS Parallel Benchmarks, ARC3D and other scientific applications. Based on these results, a discussion on the feasibility of constructing architectural independent parallel applications is presented.

  3. Indications for Computer-Aided Design and Manufacturing in Congenital Craniofacial Reconstruction.

    PubMed

    Fisher, Mark; Medina, Miguel; Bojovic, Branko; Ahn, Edward; Dorafshar, Amir H

    2016-09-01

    The complex three-dimensional relationships in congenital craniofacial reconstruction uniquely lend themselves to the ability to accurately plan and model the result provided by computer-aided design and manufacturing (CAD/CAM). The goal of this study was to illustrate indications where CAD/CAM would be helpful in the treatment of congenital craniofacial anomalies reconstruction and to discuss the application of this technology and its outcomes. A retrospective review was performed of all congenital craniofacial cases performed by the senior author between 2010 and 2014. Cases where CAD/CAM was used were identified, and illustrative cases to demonstrate the benefits of CAD/CAM were selected. Preoperative appearance, computerized plan, intraoperative course, and final outcome were analyzed. Preoperative planning enabled efficient execution of the operative plan with predictable results. Risk factors which made these patients good candidates for CAD/CAM were identified and compiled. Several indications, including multisuture and revisional craniosynostosis, facial bipartition, four-wall box osteotomy, reduction cranioplasty, and distraction osteogenesis could benefit most from this technology. We illustrate the use of CAD/CAM for these applications and describe the decision-making process both before and during surgery. We explore why we believe that CAD/CAM is indicated in these scenarios as well as the disadvantages and risks.

  4. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (SGI IRIS VERSION)

    NASA Technical Reports Server (NTRS)

    Rogers, J. L.

    1994-01-01

    Many engineering systems are large and multi-disciplinary. Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed the proposed system can be decomposed to identify its hierarchical structure. DeMAID (A Design Manager's Aid for Intelligent Decomposition) is a knowledge-based system for ordering the sequence of modules and identifying a possible multilevel structure for the design problem. DeMAID displays the modules in an N x N matrix format (called a design structure matrix) where a module is any process that requires input and generates an output. (Modules which generate an output but do not require an input, such as an initialization process, are also acceptable.) Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save a considerable amount of money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined. The decomposition of a complex design system into subsystems requires the judgement of the design manager. DeMAID reorders and groups the modules based on the links (interactions) among the modules, helping the design manager make decomposition decisions early in the design cycle. The modules are grouped into circuits (the subsystems) and displayed in an N x N matrix format. Feedback links, which indicate an iterative process, are minimized and only occur within a subsystem. Since there are no feedback links among the circuits, the circuits can be displayed in a multilevel format. Thus, a large amount of information is reduced to one or two displays which are stored for later retrieval and modification. The design manager and leaders of the design teams then have a visual display of the design problem and the intricate interactions among the different modules. The design manager could save a substantial

  5. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (SGI IRIS VERSION)

    NASA Technical Reports Server (NTRS)

    Rogers, J. L.

    1994-01-01

    Many engineering systems are large and multi-disciplinary. Before the design of new complex systems such as large space platforms can begin, the possible interactions among subsystems and their parts must be determined. Once this is completed the proposed system can be decomposed to identify its hierarchical structure. DeMAID (A Design Manager's Aid for Intelligent Decomposition) is a knowledge-based system for ordering the sequence of modules and identifying a possible multilevel structure for the design problem. DeMAID displays the modules in an N x N matrix format (called a design structure matrix) where a module is any process that requires input and generates an output. (Modules which generate an output but do not require an input, such as an initialization process, are also acceptable.) Although DeMAID requires an investment of time to generate and refine the list of modules for input, it could save a considerable amount of money and time in the total design process, particularly in new design problems where the ordering of the modules has not been defined. The decomposition of a complex design system into subsystems requires the judgement of the design manager. DeMAID reorders and groups the modules based on the links (interactions) among the modules, helping the design manager make decomposition decisions early in the design cycle. The modules are grouped into circuits (the subsystems) and displayed in an N x N matrix format. Feedback links, which indicate an iterative process, are minimized and only occur within a subsystem. Since there are no feedback links among the circuits, the circuits can be displayed in a multilevel format. Thus, a large amount of information is reduced to one or two displays which are stored for later retrieval and modification. The design manager and leaders of the design teams then have a visual display of the design problem and the intricate interactions among the different modules. The design manager could save a substantial

  6. A non-linear programming approach to the computer-aided design of regulators using a linear-quadratic formulation

    NASA Technical Reports Server (NTRS)

    Fleming, P.

    1985-01-01

    A design technique is proposed for linear regulators in which a feedback controller of fixed structure is chosen to minimize an integral quadratic objective function subject to the satisfaction of integral quadratic constraint functions. Application of a non-linear programming algorithm to this mathematically tractable formulation results in an efficient and useful computer-aided design tool. Particular attention is paid to computational efficiency and various recommendations are made. Two design examples illustrate the flexibility of the approach and highlight the special insight afforded to the designer.

  7. A visual-aided wireless monitoring system design for total hip replacement surgery.

    PubMed

    Chen, Hong; Gao, Jiyang; Su, Shaojie; Zhang, Xu; Wang, Zhihua

    2015-04-01

    To improve the positioning accuracy of implants in Total Hip Replacement (THR) surgeries, a visual-aided wireless monitoring system for THR surgery is proposed in this paper. This system aims to measure and display the contact distribution and relative pose between femoral head and acetabulum prosthesis during the surgery to help surgeons obtain accurate position of implants. The system consists of two parts: the Sensors Array Measuring System (SAMS) and the display part. The SAMS is composed of a sensors array (including contact sensors and an image sensor), signal conditioning circuits, a low power microcontroller (MCU), and a low-power transceiver. The SAMS is designed to estimate the relative pose of femoral head component to acetabular component. The display part processes the data from sensors and demonstrates the contact distribution and the pose of the prothesis during the surgery in 3-D graphics. The two parts of the system communicate with each other on an RF link at the band of 400 MHz. The signal conditioning circuits have been designed and fabricated in 0.18 μm CMOS process. Testing results show that the resolution of the signal conditioning circuits is 60.1 μ Vpp (1.35 g) with ±100 mVpp input. The chip can operate under 1.2-to-3.6 V supply voltage for single battery applications with 116-160 μ A current consumption. The system has been verified by the simulation with rotation quaternion and translation vector. The experimental results show that the contact distribution and relative pose of the two components could be measured and demonstrated in real time. The relative error of rotation is less than 8% and the actual relative error of translation is less than 10%.

  8. A visual-aided wireless monitoring system design for total hip replacement surgery.

    PubMed

    Chen, Hong; Gao, Jiyang; Su, Shaojie; Zhang, Xu; Wang, Zhihua

    2015-04-01

    To improve the positioning accuracy of implants in Total Hip Replacement (THR) surgeries, a visual-aided wireless monitoring system for THR surgery is proposed in this paper. This system aims to measure and display the contact distribution and relative pose between femoral head and acetabulum prosthesis during the surgery to help surgeons obtain accurate position of implants. The system consists of two parts: the Sensors Array Measuring System (SAMS) and the display part. The SAMS is composed of a sensors array (including contact sensors and an image sensor), signal conditioning circuits, a low power microcontroller (MCU), and a low-power transceiver. The SAMS is designed to estimate the relative pose of femoral head component to acetabular component. The display part processes the data from sensors and demonstrates the contact distribution and the pose of the prothesis during the surgery in 3-D graphics. The two parts of the system communicate with each other on an RF link at the band of 400 MHz. The signal conditioning circuits have been designed and fabricated in 0.18 μm CMOS process. Testing results show that the resolution of the signal conditioning circuits is 60.1 μ Vpp (1.35 g) with ±100 mVpp input. The chip can operate under 1.2-to-3.6 V supply voltage for single battery applications with 116-160 μ A current consumption. The system has been verified by the simulation with rotation quaternion and translation vector. The experimental results show that the contact distribution and relative pose of the two components could be measured and demonstrated in real time. The relative error of rotation is less than 8% and the actual relative error of translation is less than 10%. PMID:25879970

  9. 23 CFR 636.107 - May contracting agencies use geographic preference in Federal-aid design-build or public-private...

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Federal-aid design-build or public-private partnership projects? 636.107 Section 636.107 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.107 May contracting agencies use geographic preference in Federal-aid...

  10. 23 CFR 636.107 - May contracting agencies use geographic preference in Federal-aid design-build or public-private...

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Federal-aid design-build or public-private partnership projects? 636.107 Section 636.107 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.107 May contracting agencies use geographic preference in Federal-aid...

  11. 23 CFR 636.107 - May contracting agencies use geographic preference in Federal-aid design-build or public-private...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Federal-aid design-build or public-private partnership projects? 636.107 Section 636.107 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.107 May contracting agencies use geographic preference in Federal-aid...

  12. 23 CFR 636.107 - May contracting agencies use geographic preference in Federal-aid design-build or public-private...

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... Federal-aid design-build or public-private partnership projects? 636.107 Section 636.107 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.107 May contracting agencies use geographic preference in Federal-aid...

  13. 23 CFR 636.107 - May contracting agencies use geographic preference in Federal-aid design-build or public-private...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Federal-aid design-build or public-private partnership projects? 636.107 Section 636.107 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING General § 636.107 May contracting agencies use geographic preference in Federal-aid...

  14. Conservation and aid: designing more effective investments in natural resource governance reform.

    PubMed

    Nelson, Fred

    2009-10-01

    Biodiversity conservation outcomes are closely related to the rules and institutions governing resource use. Creating local incentives for conservation through more secure resource tenure is central to conservation outcomes on private and communal lands, where the preponderance of biodiversity occurs. Conservation efforts in sub-Saharan Africa are therefore centrally concerned with governance dynamics and institutional reform processes, such as the decentralization of property rights, and how best to achieve such reforms. Traditional mechanisms for financing conservation efforts in Africa rely heavily on funds channeled through multilateral and bilateral aid agencies. The history of development aid highlights a range of constraints these aid agencies face in terms of working toward more effective resource governance arrangements and promoting reforms. Government aid agencies possess incentives for promoting large-scale and short-term projects that maximize expenditure volumes and tend to define issues in technical rather than political terms. The history of development aid suggests that these and other characteristics of aid agencies impedes their ability to influence governance reform processes and that aid funding may discourage the adoption of reforms. Greater emphasis in African conservation financing needs to be placed on flexible, small-scale investments aligned to local interests and constituencies that prioritize innovation, learning, and experimentation. Additionally, more research is required that explores the linkages between conservation funding, donor decision-making processes, and governance reforms. PMID:19765032

  15. Design of an Yb-169 source optimized for gold nanoparticle-aided radiation therapy

    SciTech Connect

    Reynoso, Francisco J.; Manohar, Nivedh; Cho, Sang Hyun

    2014-10-15

    Purpose: To find an optimum design of a new high-dose rate ytterbium (Yb)-169 brachytherapy source that would maximize the dose enhancement during gold nanoparticle-aided radiation therapy (GNRT), while meeting practical constraints for manufacturing a clinically relevant brachytherapy source. Methods: Four different Yb-169 source designs were considered in this investigation. The first three source models had a single encapsulation made of one of the following materials: aluminum, titanium, and stainless steel. The last source model adopted a dual encapsulation design with an inner aluminum capsule surrounding the Yb-core and an outer titanium capsule. Monte Carlo (MC) simulations using the Monte Carlo N-Particle code version 5 (MCNP5) were conducted initially to investigate the spectral changes caused by these four source designs and the associated variations in macroscopic dose enhancement across the tumor loaded with gold nanoparticles (GNPs) at 0.7% by weight. Subsequent MC simulations were performed using the EGSnrc and NOREC codes to determine the secondary electron spectra and microscopic dose enhancement as a result of irradiating the GNP-loaded tumor with the MCNP-calculated source spectra. Results: Effects of the source filter design were apparent in the current MC results. The intensity-weighted average energy of the Yb-169 source varied from 108.9 to 122.9 keV, as the source encapsulation material changed from aluminum to stainless steel. Accordingly, the macroscopic dose enhancement calculated at 1 cm away from the source changed from 51.0% to 45.3%. The sources encapsulated by titanium and aluminum/titanium combination showed similar levels of dose enhancement, 49.3% at 1 cm, and average energies of 113.0 and 112.3 keV, respectively. While the secondary electron spectra due to the investigated source designs appeared to look similar in general, some differences were noted especially in the low energy region (<50 keV) of the spectra suggesting the

  16. An Investigation into Computer Aided Drafting and Design (CADD) in the Saginaw Area from the Viewpoint of Mechanical Drafting and Design Employers.

    ERIC Educational Resources Information Center

    Irwin, John L.

    The extent to which computer-aided drafting and design (CADD) was being used in local businesses in Saginaw, Michigan, was investigated. Focuses of a literature review were types of CADD systems, categories of CADD users, and the symbiotic relationship between industry and education in providing CADD training. The survey questionnaire was…

  17. Marginal accuracy of four-unit zirconia fixed dental prostheses fabricated using different computer-aided design/computer-aided manufacturing systems.

    PubMed

    Kohorst, Philipp; Brinkmann, Henrike; Li, Jiang; Borchers, Lothar; Stiesch, Meike

    2009-06-01

    Besides load-bearing capacity, marginal accuracy is a further crucial factor influencing the clinical long-term reliability of fixed dental prostheses (FDPs). The aim of this in vitro study was to evaluate the marginal fit of four-unit zirconia bridge frameworks fabricated using four different computer-aided design (CAD)/computer-aided manufacturing (CAM) systems. Ten frameworks were manufactured using each fabricating system. Three systems (inLab, Everest, Cercon) processed white-stage zirconia blanks, which had to be sintered to final density after milling, while with one system (Digident) restorations were directly milled from a fully sintered material. After manufacturing, horizontal and vertical marginal discrepancies, as well as the absolute marginal discrepancy, were determined by means of a replica technique. The absolute marginal discrepancy, which is considered to be the most suitable parameter reflecting restorations' misfit in the marginal area, had a mean value of 58 mum for the Digident system. By contrast, mean absolute marginal discrepancies for the three other systems, processing presintered blanks, differed significantly and ranged between 183 and 206 mum. Within the limitations of this study, it could be concluded that the marginal fit of zirconia FDPs is significantly dependent on the CAD/CAM system used, with restorations processed of fully sintered zirconia showing better fitting accuracy. PMID:19583762

  18. Computer-Aided Drug Design (CADD): Methodological Aspects and Practical Applications in Cancer Research

    NASA Astrophysics Data System (ADS)

    Gianti, Eleonora

    Computer-Aided Drug Design (CADD) has deservedly gained increasing popularity in modern drug discovery (Schneider, G.; Fechner, U. 2005), whether applied to academic basic research or the pharmaceutical industry pipeline. In this work, after reviewing theoretical advancements in CADD, we integrated novel and stateof- the-art methods to assist in the design of small-molecule inhibitors of current cancer drug targets, specifically: Androgen Receptor (AR), a nuclear hormone receptor required for carcinogenesis of Prostate Cancer (PCa); Signal Transducer and Activator of Transcription 5 (STAT5), implicated in PCa progression; and Epstein-Barr Nuclear Antigen-1 (EBNA1), essential to the Epstein Barr Virus (EBV) during latent infections. Androgen Receptor. With the aim of generating binding mode hypotheses for a class (Handratta, V.D. et al. 2005) of dual AR/CYP17 inhibitors (CYP17 is a key enzyme for androgens biosynthesis and therefore implicated in PCa development), we successfully implemented a receptor-based computational strategy based on flexible receptor docking (Gianti, E.; Zauhar, R.J. 2012). Then, with the ultimate goal of identifying novel AR binders, we performed Virtual Screening (VS) by Fragment-Based Shape Signatures, an improved version of the original method developed in our Laboratory (Zauhar, R.J. et al. 2003), and we used the results to fully assess the high-level performance of this innovative tool in computational chemistry. STAT5. The SRC Homology 2 (SH2) domain of STAT5 is responsible for phospho-peptide recognition and activation. As a keystone of Structure-Based Drug Design (SBDD), we characterized key residues responsible for binding. We also generated a model of STAT5 receptor bound to a phospho-peptide ligand, which was validated by docking publicly known STAT5 inhibitors. Then, we performed Shape Signatures- and docking-based VS of the ZINC database (zinc.docking.org), followed by Molecular Mechanics Generalized Born Surface Area (MMGBSA

  19. NEXUS/NASCAD- NASA ENGINEERING EXTENDIBLE UNIFIED SOFTWARE SYSTEM WITH NASA COMPUTER AIDED DESIGN

    NASA Technical Reports Server (NTRS)

    Purves, L. R.

    1994-01-01

    NEXUS, the NASA Engineering Extendible Unified Software system, is a research set of computer programs designed to support the full sequence of activities encountered in NASA engineering projects. This sequence spans preliminary design, design analysis, detailed design, manufacturing, assembly, and testing. NEXUS primarily addresses the process of prototype engineering, the task of getting a single or small number of copies of a product to work. Prototype engineering is a critical element of large scale industrial production. The time and cost needed to introduce a new product are heavily dependent on two factors: 1) how efficiently required product prototypes can be developed, and 2) how efficiently required production facilities, also a prototype engineering development, can be completed. NEXUS extendibility and unification are achieved by organizing the system as an arbitrarily large set of computer programs accessed in a common manner through a standard user interface. The NEXUS interface is a multipurpose interactive graphics interface called NASCAD (NASA Computer Aided Design). NASCAD can be used to build and display two and three-dimensional geometries, to annotate models with dimension lines, text strings, etc., and to store and retrieve design related information such as names, masses, and power requirements of components used in the design. From the user's standpoint, NASCAD allows the construction, viewing, modification, and other processing of data structures that represent the design. Four basic types of data structures are supported by NASCAD: 1) three-dimensional geometric models of the object being designed, 2) alphanumeric arrays to hold data ranging from numeric scalars to multidimensional arrays of numbers or characters, 3) tabular data sets that provide a relational data base capability, and 4) procedure definitions to combine groups of system commands or other user procedures to create more powerful functions. NASCAD has extensive abilities to

  20. Report on DOE - industry workshop on Computer-Aided Catalyst Design (CACD)

    SciTech Connect

    Hay, P.J.

    1994-07-01

    Representatives from industry, national laboratories, and the DOE met to review the status of the DOE-sponsored Computer-Aided Catalyst Design (CACD) program and to assess current industrial needs in CACD. Of the 40 participants at the workshop, nearly half were from industry representing 12 companies--Arco Chemical, Amoco Chemical, Biosym, Dow, DuPont, Exxon, Ford, General Motors, Mobil, Monsanto, W.R. Grace and Union Carbide--that included nine of the largest chemical producers in the U.S. representing $61 billion in chemical sales in 1993. An overview of developments in catalyst modeling at the national laboratories was presented, and current CACD-related activities at each of the companies were described by the industrial participants. The CACD program is addressing important industry needs and is having a significant impact despite the current limited scope and budget. The industrial participants urged the program to continue to target specific areas and to encourage collaborative work among the national labs. Industrial participants expressed strong interest in increased interactions with CACD activities at the national labs, where competencies in theory, modeling, and simulation complement the traditional strengths of catalysis expertise in industry. The chemical, refining and automotive industries face continual economic and environmental pressures for now or improved catalytic processes that are more efficient and produce fewer undesirable byproducts. CACD is viewed as an effective means to enhance experimental catalysis research. The industrial participants attested to the importance of developing and applying catalysis modeling capabilities. The companies represented at the meeting had varying degrees of activity in this area, and many already had significant interactions with national labs. As potential users of this technology, they strongly endorsed the work in the CACD program in the development of modeling capabilities.

  1. Computer-aided design and manufacture of an above-knee amputee socket.

    PubMed

    Torres-Moreno, R; Saunders, C G; Foort, J; Morrison, J B

    1991-01-01

    This paper describes the initial test results obtained from a newly developed computer-aided socket design (CASD) and manufacturing (CASM) process for above-knee amputees. Anthropometric measures taken from an amputee provided input information to a CASD system. Using these measurements, data from a reference shape library stored in the computer were selected and modified to create a unique socket shape reflecting the particular characteristics of the amputation stump. The resultant shape was produced as a 'primitive' test socket by a CASM process. Numerical shape data were then transferred to a CNC milling machine to construct a negative cast, from which the primitive socket was produced by a vacuum-forming procedure. The resultant primitive socket shape was fitted and the amputee was able to load the socket without discomfort. Some shape discrepancies were identified and the shape data were modified interactively by the CASD system to create a final socket shape. The final socket shape was manufactured and worn by the amputee during a 35 min walking trial. Subjective evaluation was that the socket provided comfort and control comparable with that of the conventional socket, and proved to be acceptable to the amputee. This was followed by a 2-month home trial which was also successful. The CASD socket shapes were compared numerically in area, shape and volume with data taken from the original socket worn by the amputee, a new socket made by conventional methods and a topographic model of the amputation stump. The final CASD socket shape compared favourably with that of a socket manufactured by conventional methods.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:2002669

  2. Enveloped viruses understood via multiscale simulation: computer-aided vaccine design

    NASA Astrophysics Data System (ADS)

    Shreif, Z.; Adhangale, P.; Cheluvaraja, S.; Perera, R.; Kuhn, R.; Ortoleva, P.

    Enveloped viruses are viewed as an opportunity to understand how highly organized and functional biosystems can emerge from a collection of millions of chaotically moving atoms. They are an intermediate level of complexity between macromolecules and bacteria. They are a natural system for testing theories of self-assembly and structural transitions, and for demonstrating the derivation of principles of microbiology from laws of molecular physics. As some constitute threats to human health, a computer-aided vaccine and drug design strategy that would follow from a quantitative model would be an important contribution. However, current molecular dynamics simulation approaches are not practical for modeling such systems. Our multiscale approach simultaneously accounts for the outer protein net and inner protein/genomic core, and their less structured membranous material and host fluid. It follows from a rigorous multiscale deductive analysis of laws of molecular physics. Two types of order parameters are introduced: (1) those for structures wherein constituent molecules retain long-lived connectivity (they specify the nanoscale structure as a deformation from a reference configuration) and (2) those for which there is no connectivity but organization is maintained on the average (they are field variables such as mass density or measures of preferred orientation). Rigorous multiscale techniques are used to derive equations for the order parameters dynamics. The equations account for thermal-average forces, diffusion coefficients, and effects of random forces. Statistical properties of the atomic-scale fluctuations and the order parameters are co-evolved. By combining rigorous multiscale techniques and modern supercomputing, systems of extreme complexity can be modeled.

  3. Enveloped viruses understood via multiscale simulation: computer-aided vaccine design

    NASA Astrophysics Data System (ADS)

    Shreif, Z.; Adhangale, P.; Cheluvaraja, S.; Perera, R.; Kuhn, R.; Ortoleva, P.

    2008-04-01

    Enveloped viruses are viewed as an opportunity to understand how highly organized and functional biosystems can emerge from a collection of millions of chaotically moving atoms. They are an intermediate level of complexity between macromolecules and bacteria. They are a natural system for testing theories of self-assembly and structural transitions, and for demonstrating the derivation of principles of microbiology from laws of molecular physics. As some constitute threats to human health, a computer-aided vaccine and drug design strategy that would follow from a quantitative model would be an important contribution. However, current molecular dynamics simulation approaches are not practical for modeling such systems. Our multiscale approach simultaneously accounts for the outer protein net and inner protein/genomic core, and their less structured membranous material and host fluid. It follows from a rigorous multiscale deductive analysis of laws of molecular physics. Two types of order parameters are introduced: (1) those for structures wherein constituent molecules retain long-lived connectivity (they specify the nanoscale structure as a deformation from a reference configuration) and (2) those for which there is no connectivity but organization is maintained on the average (they are field variables such as mass density or measures of preferred orientation). Rigorous multiscale techniques are used to derive equations for the order parameters dynamics. The equations account for thermal-average forces, diffusion coefficients, and effects of random forces. Statistical properties of the atomic-scale fluctuations and the order parameters are co-evolved. By combining rigorous multiscale techniques and modern supercomputing, systems of extreme complexity can be modeled.

  4. Recent advances in computer-aided drug design as applied to anti-influenza drug discovery.

    PubMed

    Mallipeddi, Prema L; Kumar, Gyanendra; White, Stephen W; Webb, Thomas R

    2014-01-01

    Influenza is a seasonal and serious health threat, and the recent outbreak of H7N9 following the pandemic spread of H1N1 in 2009 has served to emphasize the importance of anti-influenza drug discovery. Zanamivir (Relenza™) and oseltamivir (Tamiflu(®)) are two antiviral drugs currently recommended by the CDC for treating influenza. Both are examples of the successful application of structure-based drug design strategies. These strategies have combined computer- based approaches, such as docking- and pharmacophore-based virtual screening with X-ray crystallographic structural analyses. Docking is a routinely used computational method to identify potential hits from large compound libraries. This method has evolved from simple rigid docking approaches to flexible docking methods to handle receptor flexibility and to enhance hit rates in virtual screening. Virtual screening approaches can employ both ligand-based and structurebased pharmacophore models depending on the available information. The exponential growth in computing power has increasingly facilitated the application of computer-aided methods in drug discovery, and they now play significant roles in the search for novel therapeutics. An overview of these computational tools is presented in this review, and recent advances and challenges will be discussed. The focus of the review will be anti-influenza drug discovery and how advances in our understanding of viral biology have led to the discovery of novel influenza protein targets. Also discussed will be strategies to circumvent the problem of resistance emerging from rapid mutations that has seriously compromised the efficacy of current anti-influenza therapies.

  5. The effect of two cognitive aid designs on team functioning during intra-operative anaphylaxis emergencies: a multi-centre simulation study.

    PubMed

    Marshall, S D; Sanderson, P; McIntosh, C A; Kolawole, H

    2016-04-01

    This multi-centre repeated measures study was undertaken to determine how contrasting designs of cognitive aids affect team performance during simulated intra-operative anaphylaxis crises. A total of 24 teams consisting of a consultant anaesthetist, an anaesthetic trainee and anaesthetic assistant managed three simulated intra-operative anaphylaxis emergencies. Each team was assigned at random to a counterbalanced order of: no cognitive aid; a linear cognitive aid; and a branched cognitive aid, and scored for team functioning. Scores were significantly higher with a linear compared with either a branched version of the cognitive aid or no cognitive aid for 'Team Overall Behavioural Performance', difference between study groups (F-value) 5.8, p = 0.01. Aggregate scores were higher with the linear compared with the branched aid design (p = 0.03). Cognitive aids improve co-ordination of the team's activities and support team members to verbalise their actions. A linear design of cognitive aid improves team functioning more than a branched design.

  6. Combining principles of Cognitive Load Theory and diagnostic error analysis for designing job aids: Effects on motivation and diagnostic performance in a process control task.

    PubMed

    Kluge, Annette; Grauel, Britta; Burkolter, Dina

    2013-03-01

    Two studies are presented in which the design of a procedural aid and the impact of an additional decision aid for process control were assessed. In Study 1, a procedural aid was developed that avoids imposing unnecessary extraneous cognitive load on novices when controlling a complex technical system. This newly designed procedural aid positively affected germane load, attention, satisfaction, motivation, knowledge acquisition and diagnostic speed for novel faults. In Study 2, the effect of a decision aid for use before the procedural aid was investigated, which was developed based on an analysis of diagnostic errors committed in Study 1. Results showed that novices were able to diagnose both novel faults and practised faults, and were even faster at diagnosing novel faults. This research contributes to the question of how to optimally support novices in dealing with technical faults in process control.

  7. Musicians and hearing aid design--is your hearing instrument being overworked?

    PubMed

    Schmidt, Mark

    2012-09-01

    Music can have sound levels that are in excess of the capability of most modern digital hearing aids to transduce sound without significant distortion. One innovation is to use a hearing aid microphone that is less sensitive to some of the lower frequency intense components of music, thereby providing the analog-to-digital (A/D) converter with an input that is within its optimal operating region. The "missing" low-frequency information can still enter through an unoccluded earmold as unamplified sound and be part of the entire music listening experience. Technical issues with this alternative microphone configuration include an increase in the internal noise floor of the hearing aid, but with judicious use of expansion, the noise floor can significantly be reduced. Other issues relate to fittings where significant low-frequency amplification is also required, but this type of fitting can be optimized in the fitting software by adding amplification after the A/D bottle neck. PMID:23258617

  8. Computer AIDS for Clinical Research Management and Control: General Analysis and Design

    PubMed Central

    Willard, Christopher G.; Gatewood, Laël C.; Ellis, Lynda B. M.

    1979-01-01

    Clinical research projects involve concurrent management of subjects, protocol, analysis and study. This complicated management problem could be aided by the use of computerized data systems. For most effective aid, such a system should consider all aspects of clinical research. We have analyzed clinical research tasks involving data collection, communication, and management and have used this task analysis to develop a system model for clinical research data management and control. The model deals with data control, study monitoring, user interfaces, report and analysis libraries, and study subject and support data bases. It may be used as a basis for computerized data system study and development. The model also indicates that the role of computerized systems in clinical research could be expanded into such areas as automatic report generation and control, process control aids, quality assurance monitoring, and study documentation.

  9. Fatigue analysis of computer-aided design/computer-aided manufacturing resin-based composite vs. lithium disilicate glass-ceramic.

    PubMed

    Ankyu, Shuhei; Nakamura, Keisuke; Harada, Akio; Hong, Guang; Kanno, Taro; Niwano, Yoshimi; Örtengren, Ulf; Egusa, Hiroshi

    2016-08-01

    Resin-based composite molar crowns made by computer-aided design/computer-aided manufacturing (CAD/CAM) systems have been proposed as an inexpensive alternative to metal-ceramic or all-ceramic crowns. However, there is a lack of scientific information regarding fatigue resistance. This study aimed to analyze the fatigue behavior of CAD/CAM resin-based composite compared with lithium disilicate glass-ceramic. One-hundred and sixty bar-shaped specimens were fabricated using resin-based composite blocks [Lava Ultimate (LU); 3M/ESPE] and lithium disilicate glass-ceramic [IPS e.max press (EMP); Ivoclar/Vivadent]. The specimens were divided into four groups: no treatment (NT); thermal cycling (TC); mechanical cycling (MC); and thermal cycling followed by mechanical cycling (TCMC). Thermal cycling was performed by alternate immersion in water baths of 5°C and 55°C for 5 × 10(4) cycles. Mechanical cycling was performed in a three-point bending test, with a maximum load of 40 N, for 1.2 × 10(6) cycles. In addition, LU and EMP molar crowns were fabricated and subjected to fatigue treatments followed by load-to-failure testing. The flexural strength of LU was not severely reduced by the fatigue treatments. The fatigue treatments did not significantly affect the fracture resistance of LU molar crowns. The results demonstrate the potential of clinical application of CAD/CAM-generated resin-based composite molar crowns in terms of fatigue resistance. PMID:27203408

  10. Fatigue analysis of computer-aided design/computer-aided manufacturing resin-based composite vs. lithium disilicate glass-ceramic.

    PubMed

    Ankyu, Shuhei; Nakamura, Keisuke; Harada, Akio; Hong, Guang; Kanno, Taro; Niwano, Yoshimi; Örtengren, Ulf; Egusa, Hiroshi

    2016-08-01

    Resin-based composite molar crowns made by computer-aided design/computer-aided manufacturing (CAD/CAM) systems have been proposed as an inexpensive alternative to metal-ceramic or all-ceramic crowns. However, there is a lack of scientific information regarding fatigue resistance. This study aimed to analyze the fatigue behavior of CAD/CAM resin-based composite compared with lithium disilicate glass-ceramic. One-hundred and sixty bar-shaped specimens were fabricated using resin-based composite blocks [Lava Ultimate (LU); 3M/ESPE] and lithium disilicate glass-ceramic [IPS e.max press (EMP); Ivoclar/Vivadent]. The specimens were divided into four groups: no treatment (NT); thermal cycling (TC); mechanical cycling (MC); and thermal cycling followed by mechanical cycling (TCMC). Thermal cycling was performed by alternate immersion in water baths of 5°C and 55°C for 5 × 10(4) cycles. Mechanical cycling was performed in a three-point bending test, with a maximum load of 40 N, for 1.2 × 10(6) cycles. In addition, LU and EMP molar crowns were fabricated and subjected to fatigue treatments followed by load-to-failure testing. The flexural strength of LU was not severely reduced by the fatigue treatments. The fatigue treatments did not significantly affect the fracture resistance of LU molar crowns. The results demonstrate the potential of clinical application of CAD/CAM-generated resin-based composite molar crowns in terms of fatigue resistance.

  11. Evaluation of three-dimensional position change of the condylar head after orthognathic surgery using computer-aided design/computer-aided manufacturing-made condyle positioning jig.

    PubMed

    Kim, Hyung-Mo; Baek, Seung-Hak; Kim, Tae-Yun; Choi, Jin-Young

    2014-11-01

    This study was performed to evaluate the efficacy of computer-aided design/computer-aided manufacturing (CAM/CAD)-made condyle positioning jig in orthognathic surgery. The sample consisted of 40 mandibular condyles of 20 patients with class III malocclusion who underwent bilateral sagittal split ramus osteotomy with semirigid fixation (6 men and 14 women; mean age, 25 y; mean amount of mandibular setback, 5.8 mm). Exclusion criteria were patients who needed surgical correction of the frontal ramal inclination and had signs and symptoms of the temporomandibular disorder before surgery. Three-dimensional computed tomograms were taken 1 month before the surgery (T1) and 1 day after the surgery (T2). The condylar position was evaluated at the T1 and T2 stages on the axial, frontal, and sagittal aspects in the three-dimensional coordinates. The linear change of the posterior border of the proximal segment of the ramus between T1 and T2 was also evaluated in 30 condyles (15 patients), with the exception of 10 condyles of 5 patients who received mandibular angle reduction surgery. There was no significant difference in the condylar position in the frontal and sagittal aspects (P > 0.05). Although there was a significant difference in the condylar position in the axial aspect (P < 0.01), the amount of difference was less than 1 mm and 1 degree; it can be considered clinically nonsignificant. In the linear change of the posterior border of the proximal segment of the ramus, the mean change was 1.4 mm and 60% of the samples showed a minimal change of less than 1 mm. The results of this study suggest that CAD/CAM-made condyle positioning jig is easy to install and reliable to use in orthognathic surgery.

  12. Influence of different luting protocols on shear bond strength of computer aided design/computer aided manufacturing resin nanoceramic material to dentin

    PubMed Central

    Poggio, Claudio; Pigozzo, Marco; Ceci, Matteo; Scribante, Andrea; Beltrami, Riccardo; Chiesa, Marco

    2016-01-01

    Background: The purpose of this study was to evaluate the influence of three different luting protocols on shear bond strength of computer aided design/computer aided manufacturing (CAD/CAM) resin nanoceramic (RNC) material to dentin. Materials and Methods: In this in vitro study, 30 disks were milled from RNC blocks (Lava Ultimate/3M ESPE) with CAD/CAM technology. The disks were subsequently cemented to the exposed dentin of 30 recently extracted bovine permanent mandibular incisors. The specimens were randomly assigned into 3 groups of 10 teeth each. In Group 1, disks were cemented using a total-etch protocol (Scotchbond™ Universal Etchant phosphoric acid + Scotchbond Universal Adhesive + RelyX™ Ultimate conventional resin cement); in Group 2, disks were cemented using a self-etch protocol (Scotchbond Universal Adhesive + RelyX™ Ultimate conventional resin cement); in Group 3, disks were cemented using a self-adhesive protocol (RelyX™ Unicem 2 Automix self-adhesive resin cement). All cemented specimens were placed in a universal testing machine (Instron Universal Testing Machine 3343) and submitted to a shear bond strength test to check the strength of adhesion between the two substrates, dentin, and RNC disks. Specimens were stressed at a crosshead speed of 1 mm/min. Data were analyzed with analysis of variance and post-hoc Tukey's test at a level of significance of 0.05. Results: Post-hoc Tukey testing showed that the highest shear strength values (P < 0.001) were reported in Group 2. The lowest data (P < 0.001) were recorded in Group 3. Conclusion: Within the limitations of this in vitro study, conventional resin cements (coupled with etch and rinse or self-etch adhesives) showed better shear strength values compared to self-adhesive resin cements. Furthermore, conventional resin cements used together with a self-etch adhesive reported the highest values of adhesion. PMID:27076822

  13. Shear bond strength of computer-aided design and computer-aided manufacturing feldspathic and nano resin ceramics blocks cemented with three different generations of resin cement

    PubMed Central

    Ab-Ghani, Zuryati; Jaafar, Wahyuni; Foo, Siew Fon; Ariffin, Zaihan; Mohamad, Dasmawati

    2015-01-01

    Aim: To evaluate the shear bond strength between the dentin substrate and computer-aided design and computer-aided manufacturing feldspathic ceramic and nano resin ceramics blocks cemented with resin cement. Materials and Methods: Sixty cuboidal blocks (5 mm × 5 mm × 5 mm) were fabricated in equal numbers from feldspathic ceramic CEREC® Blocs PC and nano resin ceramic Lava™ Ultimate, and randomly divided into six groups (n = 10). Each block was cemented to the dentin of 60 extracted human premolar using Variolink® II/Syntac Classic (multi-steps etch-and-rinse adhesive bonding), NX3 Nexus® (two-steps etch-and-rinse adhesive bonding) and RelyX™ U200 self-adhesive cement. All specimens were thermocycled, and shear bond strength testing was done using the universal testing machine at a crosshead speed of 1.0 mm/min. Data were analyzed using one-way ANOVA. Results: Combination of CEREC® Blocs PC and Variolink® II showed the highest mean shear bond strength (8.71 Mpa), while the lowest of 2.06 Mpa were observed in Lava™ Ultimate and RelyX™ U200. There was no significant difference in the mean shear bond strength between different blocks. Conclusion: Variolink® II cement using multi-steps etch-and-rinse adhesive bonding provided a higher shear bond strength than the self-adhesive cement RelyX U200. The shear bond strength was not affected by the type of blocks used. PMID:26430296

  14. Results from Coupled Optical and Electrical Sentaurus TCAD Models of a Gallium Phosphide on Silicon Electron Carrier Selective Contact Solar Cell

    SciTech Connect

    Limpert, Steven; Ghosh, Kunal; Wagner, Hannes; Bowden, Stuart; Honsberg, Christiana; Goodnick, Stephen; Bremner, Stephen; Green, Martin

    2014-06-09

    We report results from coupled optical and electrical Sentaurus TCAD models of a gallium phosphide (GaP) on silicon electron carrier selective contact (CSC) solar cell. Detailed analyses of current and voltage performance are presented for devices having substrate thicknesses of 10 μm, 50 μm, 100 μm and 150 μm, and with GaP/Si interfacial quality ranging from very poor to excellent. Ultimate potential performance was investigated using optical absorption profiles consistent with light trapping schemes of random pyramids with attached and detached rear reflector, and planar with an attached rear reflector. Results indicate Auger-limited open-circuit voltages up to 787 mV and efficiencies up to 26.7% may be possible for front-contacted devices.

  15. Determination of Optimal Parameters for Dual-Layer Cathode of Polymer Electrolyte Fuel Cell Using Computational Intelligence-Aided Design

    PubMed Central

    Chen, Yi; Huang, Weina; Peng, Bei

    2014-01-01

    Because of the demands for sustainable and renewable energy, fuel cells have become increasingly popular, particularly the polymer electrolyte fuel cell (PEFC). Among the various components, the cathode plays a key role in the operation of a PEFC. In this study, a quantitative dual-layer cathode model was proposed for determining the optimal parameters that minimize the over-potential difference and improve the efficiency using a newly developed bat swarm algorithm with a variable population embedded in the computational intelligence-aided design. The simulation results were in agreement with previously reported results, suggesting that the proposed technique has potential applications for automating and optimizing the design of PEFCs. PMID:25490761

  16. An investigation of constraint-based component-modeling for knowledge representation in computer-aided conceptual design

    NASA Technical Reports Server (NTRS)

    Kolb, Mark A.

    1990-01-01

    Originally, computer programs for engineering design focused on detailed geometric design. Later, computer programs for algorithmically performing the preliminary design of specific well-defined classes of objects became commonplace. However, due to the need for extreme flexibility, it appears unlikely that conventional programming techniques will prove fruitful in developing computer aids for engineering conceptual design. The use of symbolic processing techniques, such as object-oriented programming and constraint propagation, facilitate such flexibility. Object-oriented programming allows programs to be organized around the objects and behavior to be simulated, rather than around fixed sequences of function- and subroutine-calls. Constraint propagation allows declarative statements to be understood as designating multi-directional mathematical relationships among all the variables of an equation, rather than as unidirectional assignments to the variable on the left-hand side of the equation, as in conventional computer programs. The research has concentrated on applying these two techniques to the development of a general-purpose computer aid for engineering conceptual design. Object-oriented programming techniques are utilized to implement a user-extensible database of design components. The mathematical relationships which model both geometry and physics of these components are managed via constraint propagation. In addition, to this component-based hierarchy, special-purpose data structures are provided for describing component interactions and supporting state-dependent parameters. In order to investigate the utility of this approach, a number of sample design problems from the field of aerospace engineering were implemented using the prototype design tool, Rubber Airplane. The additional level of organizational structure obtained by representing design knowledge in terms of components is observed to provide greater convenience to the program user, and to

  17. The Design and Production of a Procedure Training Aid Using the Procedure Learning Format and the Computer Automated Page Layout (PLA) Routine. Technical Note 12-83.

    ERIC Educational Resources Information Center

    Terrell, William R.; And Others

    This report describes a field application of the Computer Automated Page Layout (PLA) system to the development of a procedure training aid for the SH-3D/H Helicopter, as part of the Training Analysis and Evaluation Group's (TAEG) ongoing development effort to provide tools for the design and publication of technical training aids in a format…

  18. Shape sensing for computer aided below-knee prosthetic socket design.

    PubMed

    Fernie, G R; Griggs, G; Bartlett, S; Lunau, K

    1985-04-01

    Shape sensing is useful in the computer aided prosthetic fitting process for two purposes. 1. To input characteristic prosthetic shapes that have been developed over the years through the experience of prosthetists. 2. To provide an accurate and rapid measurement of the anatomical shape of the stump. This paper describes two instruments which have been built to meet these objectives.

  19. Computer aided design of prosthetic sockets for below-knee amputees.

    PubMed

    Saunders, C G; Foort, J; Bannon, M; Lean, D; Panych, L

    1985-04-01

    A computer-aided sculpting system for use in prosthetics is described. The prosthetist's sculpting tools now consist of a computer, a graphics terminal, a mouse and an on-screen moveable cursor. Accompanied by the system software, these tools allow systematic modification of a primitive socket using techniques analogous to those used by a prosthetist working with rasps and plaster.

  20. Targeting HIV reverse transcriptase for anti-AIDS drug design: structural and biological considerations for chemotherapeutic strategies.

    PubMed

    Arnold, E; Das, K; Ding, J; Yadav, P N; Hsiou, Y; Boyer, P L; Hughes, S H

    1996-04-01

    The reverse transcriptase of HIV is a key target for the antiviral treatment of AIDS. Numerous potent inhibitors of RT have been described including all of the drugs that have been currently licensed for the treatment of AIDS, but their efficacy has been limited by the emergence of drug-resistant HIV variants. Extensive biochemical, genetic, and clinical data about HIV RT enzymatic mechanisms, inhibition, and drug resistance have been reported. This information, taken together with structural data from crystallographic studies of HIV-1 RT, has set the stage for structure-based design of improved inhibitors of this essential viral enzyme. Comparisons of the different crystal structures of HIV-1 RT shows that the enzyme has great conformational flexibility, providing additional possibilities for drug targeting. Recent clinical and virological data suggest that HIV-1 RT enzymes that carry drug-resistance mutations can be substantially impaired and that combinations of RT inhibitors can produce significant clinical benefit in the treatment of AIDS. An immediate goal is to use the available information to design specific inhibitors or combination therapies that will select for relatively less fit HIV variants.

  1. Computer-Aided Design and Rapid Prototyping–Assisted Contouring of Costal Cartilage Graft for Facial Reconstructive Surgery

    PubMed Central

    Lee, Shu Jin; Lee, Heow Pueh; Tse, Kwong Ming; Cheong, Ee Cherk; Lim, Siak Piang

    2012-01-01

    Complex 3-D defects of the facial skeleton are difficult to reconstruct with freehand carving of autogenous bone grafts. Onlay bone grafts are hard to carve and are associated with imprecise graft-bone interface contact and bony resorption. Autologous cartilage is well established in ear reconstruction as it is easy to carve and is associated with minimal resorption. In the present study, we aimed to reconstruct the hypoplastic orbitozygomatic region in a patient with left hemifacial microsomia using computer-aided design and rapid prototyping to facilitate costal cartilage carving and grafting. A three-step process of (1) 3-D reconstruction of the computed tomographic image, (2) mirroring the facial skeleton, and (3) modeling and rapid prototyping of the left orbitozygomaticomalar region and reconstruction template was performed. The template aided in donor site selection and extracorporeal contouring of the rib cartilage graft to allow for an accurate fit of the graft to the bony model prior to final fixation in the patient. We are able to refine the existing computer-aided design and rapid prototyping methods to allow for extracorporeal contouring of grafts and present rib cartilage as a good alternative to bone for autologous reconstruction. PMID:23730421

  2. Anti-receptor antibodies designed to elicit "internal image"-bearing anti-idiotypes: a possible AIDS vaccine.

    PubMed

    Ludwig, D S; Schoolnik, G K

    1987-07-01

    Two obstacles hinder the development of an AIDS vaccine: (1) the AIDS virus exhibits extensive amino acid heterogeneity between isolates and (2) antibodies elicited by virus during the course of natural infection are often non-neutralizing. A vaccine designed to induce anti-idiotypic antibodies against the virus' receptor on T-cells, T4, should, in principle, overcome these obstacles. Such antibody could contain an "internal image" of T4 and bind the receptor binding domain of the virus. Since this domain is both critical to function and, therefore, poorly susceptible to antigenic variation, anti-receptor anti-idiotypic antibodies may demonstrate broad, strain-independent crossreactivity and block viral adherence.

  3. Effect of different adhesive strategies on microtensile bond strength of computer aided design/computer aided manufacturing blocks bonded to dentin

    PubMed Central

    Roperto, Renato; Akkus, Anna; Akkus, Ozan; Lang, Lisa; Sousa-Neto, Manoel Damiao; Teich, Sorin; Porto, Thiago Soares

    2016-01-01

    Background: The aim of this study was to determine the microtensile bond strength (μTBS) of ceramic and composite computer aided design-computer aided manufacturing (CAD-CAM) blocks bonded to dentin using different adhesive strategies. Materials and Methods: In this in vitro study, 30 crowns of sound freshly extracted human molars were sectioned horizontally 3 mm above the cementoenamel junction to produce flat dentin surfaces. Ceramic and composite CAD/CAM blocks, size 14, were sectioned into slices of 3 mm thick. Before bonding, CAD/CAM block surfaces were treated according to the manufacturer's instructions. Groups were created based on the adhesive strategy used: Group 1 (GI) - conventional resin cement + total-etch adhesive system, Group 2 (GII) - conventional resin cement + self-etch adhesive system, and Group 3 (GIII) - self-adhesive resin cement with no adhesive. Bonded specimens were stored in 100% humidity for 24h at 37΀C, and then sectioned with a slow-speed diamond saw to obtain 1 mm × 1 mm × 6 mm microsticks. Microtensile testing was then conducted using a microtensile tester. μTBS values were expressed in MPa and analyzed by one-way ANOVA with post hoc (Tukey) test at the 5% significance level. Results: Mean values and standard deviations of μTBS (MPa) were 17.68 (±2.71) for GI/ceramic; 17.62 (±3.99) for GI/composite; 13.61 (±6.92) for GII/composite; 12.22 (±4.24) for GII/ceramic; 7.47 (±2.29) for GIII/composite; and 6.48 (±3.10) for GIII/ceramic; ANOVA indicated significant differences among the adhesive modality and block interaction (P < 0.05), and no significant differences among blocks only, except between GI and GII/ceramic. Bond strength of GIII was consistently lower (P < 0.05) than GI and GII groups, regardless the block used. Conclusion: Cementation of CAD/CAM restorations, either composite or ceramic, can be significantly affected by different adhesive strategies used. PMID:27076825

  4. Using GREENSCOPE Indicators for Sustainable Computer-Aided Process Evaluation and Design

    EPA Science Inventory

    Manufacturing sustainability can be increased by educating those who design, construct, and operate facilities, and by using appropriate tools for process evaluation and design. The U.S. Environmental Protection Agency's GREENSCOPE methodology and tool, for evaluation and design ...

  5. New layer-based imaging and rapid prototyping techniques for computer-aided design and manufacture of custom dental restoration.

    PubMed

    Lee, M-Y; Chang, C-C; Ku, Y C

    2008-01-01

    Fixed dental restoration by conventional methods greatly relies on the skill and experience of the dental technician. The quality and accuracy of the final product depends mostly on the technician's subjective judgment. In addition, the traditional manual operation involves many complex procedures, and is a time-consuming and labour-intensive job. Most importantly, no quantitative design and manufacturing information is preserved for future retrieval. In this paper, a new device for scanning the dental profile and reconstructing 3D digital information of a dental model based on a layer-based imaging technique, called abrasive computer tomography (ACT) was designed in-house and proposed for the design of custom dental restoration. The fixed partial dental restoration was then produced by rapid prototyping (RP) and computer numerical control (CNC) machining methods based on the ACT scanned digital information. A force feedback sculptor (FreeForm system, Sensible Technologies, Inc., Cambridge MA, USA), which comprises 3D Touch technology, was applied to modify the morphology and design of the fixed dental restoration. In addition, a comparison of conventional manual operation and digital manufacture using both RP and CNC machining technologies for fixed dental restoration production is presented. Finally, a digital custom fixed restoration manufacturing protocol integrating proposed layer-based dental profile scanning, computer-aided design, 3D force feedback feature modification and advanced fixed restoration manufacturing techniques is illustrated. The proposed method provides solid evidence that computer-aided design and manufacturing technologies may become a new avenue for custom-made fixed restoration design, analysis, and production in the 21st century.

  6. New layer-based imaging and rapid prototyping techniques for computer-aided design and manufacture of custom dental restoration.

    PubMed

    Lee, M-Y; Chang, C-C; Ku, Y C

    2008-01-01

    Fixed dental restoration by conventional methods greatly relies on the skill and experience of the dental technician. The quality and accuracy of the final product depends mostly on the technician's subjective judgment. In addition, the traditional manual operation involves many complex procedures, and is a time-consuming and labour-intensive job. Most importantly, no quantitative design and manufacturing information is preserved for future retrieval. In this paper, a new device for scanning the dental profile and reconstructing 3D digital information of a dental model based on a layer-based imaging technique, called abrasive computer tomography (ACT) was designed in-house and proposed for the design of custom dental restoration. The fixed partial dental restoration was then produced by rapid prototyping (RP) and computer numerical control (CNC) machining methods based on the ACT scanned digital information. A force feedback sculptor (FreeForm system, Sensible Technologies, Inc., Cambridge MA, USA), which comprises 3D Touch technology, was applied to modify the morphology and design of the fixed dental restoration. In addition, a comparison of conventional manual operation and digital manufacture using both RP and CNC machining technologies for fixed dental restoration production is presented. Finally, a digital custom fixed restoration manufacturing protocol integrating proposed layer-based dental profile scanning, computer-aided design, 3D force feedback feature modification and advanced fixed restoration manufacturing techniques is illustrated. The proposed method provides solid evidence that computer-aided design and manufacturing technologies may become a new avenue for custom-made fixed restoration design, analysis, and production in the 21st century. PMID:18183523

  7. Suppression of Acoustic Oscillation in Hearing Aids: System and Circuit Design

    NASA Astrophysics Data System (ADS)

    Wang, Rongtai

    1995-01-01

    Two types of techniques for the suppression of acoustic oscillation in hearing aids have been studied, namely feed forward suppression and feedback cancellation. For feed forward suppression we introduce the maximum phase equalization (MPE) method based on the minimum phase theory. This method provides us with a higher degree of flexibility in selecting appropriate auxiliary techniques to suppress the acoustic oscillations. Examples of these auxiliary techniques have been described. But there is a limitation on the maximum usable gain increase by using feed forward techniques. For feedback cancellation techniques we present the knowledge based adaptive feedback cancellation (KBAFC) algorithm. This algorithm is fundamentally different from any previous technique. First, the KBAFC algorithm is based on the observation that although the hearing aid open loop transfer function does vary due to the change of the acoustic environment, however the structural behavior of the open loop transfer function remains invariant for a hearing aid in normal use. This property has been confirmed by experiments. In all previous feedback cancellation algorithms, such knowledge of the open loop transfer function is ignored. Second, in the KBAFC algorithm, since the structural behavior of the open loop transfer function is known, digital IIR and analog filters can be used. Additionally, a set of pure tones can be used as a probe signal. As a result, the computation complexity is reduced and the hearing aid is quiet. While in all previous feedback cancellation algorithms, since the open loop transfer function is considered to be a completely unknown, usually a FIR filter is used as a cancellation filter, and white noise is used as the probe signal. As a result, the computation complexity is large and the hearing aid is noisier. In order to verify the KBAFC algorithm, a prototype is implemented. The test results shows that by using the KBAFC algorithm the maximum cancellation can be larger

  8. Classroom Aids

    ERIC Educational Resources Information Center

    Science Activities: Classroom Projects and Curriculum Ideas, 2007

    2007-01-01

    This article describes 6 aids for science instruction, including (1) the use of fudge to represent lava; (2) the "Living by Chemistry" program, designed to make high school chemistry more accessible to a diverse pool of students without sacrificing content; (3) NOAA and NSTA's online coral reef teaching tool, a new web-based "science toolbox" for…

  9. Floriculture Aide.

    ERIC Educational Resources Information Center

    Martin, Joyce; Looney, Era

    Designed for use in a self-paced, open-entry/open-exit vocational training program for a floriculture aide, this program guide is one of six for teachers of adult women offenders from a correctional institution. Module topic outlines and sample lesson plans are presented on eleven topics: occupational opportunities in the retail florist industry;…

  10. Computer program for design and performance analysis of navigation-aid power systems. Program documentation. Volume 1: Software requirements document

    NASA Technical Reports Server (NTRS)

    Goltz, G.; Kaiser, L. M.; Weiner, H.

    1977-01-01

    A computer program has been developed for designing and analyzing the performance of solar array/battery power systems for the U.S. Coast Guard Navigational Aids. This program is called the Design Synthesis/Performance Analysis (DSPA) Computer Program. The basic function of the Design Synthesis portion of the DSPA program is to evaluate functional and economic criteria to provide specifications for viable solar array/battery power systems. The basic function of the Performance Analysis portion of the DSPA program is to simulate the operation of solar array/battery power systems under specific loads and environmental conditions. This document establishes the software requirements for the DSPA computer program, discusses the processing that occurs within the program, and defines the necessary interfaces for operation.

  11. Computer-Aided Optimization of Macroscopic Design Factors for Lithium-Ion Cell Performance and Life (Presentation)

    SciTech Connect

    Smith, K.; Kim, G. H.; Pesaran, A.

    2010-04-01

    Electric-drive vehicles enabled by power- and energy-dense batteries promise to improve vehicle efficiency and help reduce society's dependence on fossil fuels. Next generation plug-in hybrid vehicles and battery electric vehicles may also enable vehicles to be powered by electricity generated from clean, renewable resources; however, to increase the commercial viability of such vehicles, the cost, performance and life of the vehicles batteries must be further improved. This work illustrates a virtual design process to optimize the performance and life of large-format lithium ion batteries. Beginning with material-level kinetic and transport properties, the performance and life of multiple large-format cell designs are evaluated, demonstrating the impact of macroscopic design parameters such as foil thickness, tab location, and cell size and shape under various cycling conditions. Challenges for computer-aided engineering of large-format battery cells, such as competing requirements and objectives, are discussed.

  12. A Short Review of Chemical Reaction Database Systems, Computer-Aided Synthesis Design, Reaction Prediction and Synthetic Feasibility.

    PubMed

    Warr, Wendy A

    2014-06-01

    This article is the text for a pedagogical lecture to be given at the Strasbourg Summer School in Chemoinformatics in June 2104. It covers a very wide range of reaction topics including structure and reaction representation, reaction centers, atom-to-atom mapping, reaction retrieval systems, computer-aided synthesis design, retrosynthesis, reaction prediction and synthetic feasibility. In the time available the coverage of each topic can only be cursory; the main usefulness of this article to the research community is the extensive bibliography.

  13. Potential Drug-Like Inhibitors of Group 1 Influenza Neuraminidase Identified through Computer-Aided Drug Design

    PubMed Central

    Durrant, Jacob D.; McCammon, J. Andrew

    2010-01-01

    Pandemic (H1N1) influenza poses an imminent threat. Nations have stockpiled inhibitors of the influenza protein neuraminidase in hopes of protecting their citizens, but drug-resistant strains have already emerged, and novel therapeutics are urgently needed. In the current work, the computer program AutoGrow is used to generate novel predicted neuraminidase inhibitors. Given the great flexibility of the neuraminidase active site, protein dynamics are also incorporated into the computer-aided drug-design process. Several potential inhibitors are identified that are predicted to bind neuraminidase better than currently approved drugs. PMID:20427241

  14. [A study of the computer aid design for tooth arrangement of full denture].

    PubMed

    Lu, P J

    1992-05-01

    This paper is to use the power function Simpson's integration formula and some other methods to describe the geometric form of the dentition and edentulous arch in accordance with the theories and principles of tooth arrangement in textbook. The matching equations of artificial dentition and edentulous arch form and size are developed by using the multivariable regression method to analyze and summarize the clinical experiences of prosthodontists. Based on the above facts, a computer program that can be used to aid the dentist to arrange the artificial teeth for full denture is developed with Quick Basic Language and realized them in PC miniprocessors. PMID:1292895

  15. Computer-aided engineering system for design of sequence arrays and lithographic masks

    DOEpatents

    Hubbell, Earl A.; Lipshutz, Robert J.; Morris, Macdonald S.; Winkler, James L.

    1997-01-01

    An improved set of computer tools for forming arrays. According to one aspect of the invention, a computer system is used to select probes and design the layout of an array of DNA or other polymers with certain beneficial characteristics. According to another aspect of the invention, a computer system uses chip design files to design and/or generate lithographic masks.

  16. A Novel Paradigm for Computer-Aided Design: TRIZ-Based Hybridization of Topologically Optimized Density Distributions

    NASA Astrophysics Data System (ADS)

    Cardillo, A.; Cascini, G.; Frillici, F. S.; Rotini, F.

    In a recent project the authors have proposed the adoption of Optimization Systems [1] as a bridging element between Computer-Aided Innovation (CAI) and PLM to identify geometrical contradictions [2], a particular case of the TRIZ physical contradiction [3]. A further development of the research [4] has revealed that the solutions obtained from several topological optimizations can be considered as elementary customized modeling features for a specific design task. The topology overcoming the arising geometrical contradiction can be obtained through a manipulation of the density distributions constituting the conflicting pair. Already two strategies of density combination have been identified as capable to solve geometrical contradictions and several others are under extended testing. The paper illustrates the most recent results of the ongoing research mainly related to the extension of the algorithms from 2D to 3D design spaces. The whole approach is clarified by means of two detailed examples, where the proposed technique is compared with classical multi-goal optimization.

  17. Devolution and grant-in-aid design for the provision of impure public goods.

    PubMed

    Levaggi, Laura; Levaggi, Rosella

    2016-01-01

    Traditional fiscal federalism theory postulates that devolution for the provision of local public goods increases welfare. However, most of the services offered at local level are local impure public goods whose characteristics may prevent devolution from being efficient. Our paper shows that devolution is the optimal choice only for local impure public goods. For an environment characterised by coordination and asymmetry of information problems, we propose the optimal grants-in-aid formula that Central Government should use to reduce welfare losses and we compare it with what suggested by the mainstream literature. Finally, we show under which conditions devolution should be preferred to a centralised solution. From a policy point of view, our paper may explain the heterogeneity in the choices made by countries in terms of devolution in the provision of merit and impure public goods.

  18. Computer Aided Drug Design Approaches for Identification of Novel Autotaxin (ATX) Inhibitors.

    PubMed

    Vrontaki, Eleni; Melagraki, Georgia; Kaffe, Eleanna; Mavromoustakos, Thomas; Kokotos, George; Aidinis, Vassilis; Afantitis, Antreas

    2016-01-01

    Autotaxin (ATX) has become an attractive target with a huge pharmacological and pharmacochemical interest in LPA-related diseases and to date many small organic molecules have been explored as potential ATX inhibitors. As a useful aid in the various efforts of identifying novel effective ATX inhibitors, in silico methods can serve as an important and valuable tool. Especially, Virtual Screening (VS) has recently received increased attention due to the large datasets made available, the development of advanced VS techniques and the encouraging fact that VS has contributed to the discovery of several compounds that have either reached the market or entered clinical trials. Different techniques and workflows have been reported in literature with the goal to prioritize possible potent hits. In this review article several deployed virtual screening strategies for the identification of novel potent ATX inhibitors are described. PMID:26997151

  19. Participation of South African youth in the design and development of AIDS photocomics. 1997-98.

    PubMed

    Toroyan, Tamitza; Reddy, Priscilla S

    In response to an increasing incidence in HIV prevalence among South Africa's youth, a group of interdisciplinary professionals have developed a series of photocomics to address issues around HIV/AIDS communication and sexually transmitted diseases. This article examines the theory behind the use of photocomics in health, and the way the stories work to influence behavior. Results from evaluation of the comics support their use as tools with which to increase information and knowledge while role modeling desirable behavior. Lastly, the article describes the participatory process by which youth were involved in the process of developing and producing the comics. This method of developing culturally relevant and appealing health media is recommended for use in future health promotion strategies that seek to transcend a narrower approach of provision of health information and work to address the social factors that influence youth's decision making.

  20. Devolution and grant-in-aid design for the provision of impure public goods.

    PubMed

    Levaggi, Laura; Levaggi, Rosella

    2016-01-01

    Traditional fiscal federalism theory postulates that devolution for the provision of local public goods increases welfare. However, most of the services offered at local level are local impure public goods whose characteristics may prevent devolution from being efficient. Our paper shows that devolution is the optimal choice only for local impure public goods. For an environment characterised by coordination and asymmetry of information problems, we propose the optimal grants-in-aid formula that Central Government should use to reduce welfare losses and we compare it with what suggested by the mainstream literature. Finally, we show under which conditions devolution should be preferred to a centralised solution. From a policy point of view, our paper may explain the heterogeneity in the choices made by countries in terms of devolution in the provision of merit and impure public goods. PMID:27047708

  1. Creating Novel Activated Factor XI Inhibitors through Fragment Based Lead Generation and Structure Aided Drug Design

    PubMed Central

    Fjellström, Ola; Akkaya, Sibel; Beisel, Hans-Georg; Eriksson, Per-Olof; Erixon, Karl; Gustafsson, David; Jurva, Ulrik; Kang, Daiwu; Karis, David; Knecht, Wolfgang; Nerme, Viveca; Nilsson, Ingemar; Olsson, Thomas; Redzic, Alma; Roth, Robert; Sandmark, Jenny; Tigerström, Anna; Öster, Linda

    2015-01-01

    Activated factor XI (FXIa) inhibitors are anticipated to combine anticoagulant and profibrinolytic effects with a low bleeding risk. This motivated a structure aided fragment based lead generation campaign to create novel FXIa inhibitor leads. A virtual screen, based on docking experiments, was performed to generate a FXIa targeted fragment library for an NMR screen that resulted in the identification of fragments binding in the FXIa S1 binding pocket. The neutral 6-chloro-3,4-dihydro-1H-quinolin-2-one and the weakly basic quinolin-2-amine structures are novel FXIa P1 fragments. The expansion of these fragments towards the FXIa prime side binding sites was aided by solving the X-ray structures of reported FXIa inhibitors that we found to bind in the S1-S1’-S2’ FXIa binding pockets. Combining the X-ray structure information from the identified S1 binding 6-chloro-3,4-dihydro-1H-quinolin-2-one fragment and the S1-S1’-S2’ binding reference compounds enabled structure guided linking and expansion work to achieve one of the most potent and selective FXIa inhibitors reported to date, compound 13, with a FXIa IC50 of 1.0 nM. The hydrophilicity and large polar surface area of the potent S1-S1’-S2’ binding FXIa inhibitors compromised permeability. Initial work to expand the 6-chloro-3,4-dihydro-1H-quinolin-2-one fragment towards the prime side to yield molecules with less hydrophilicity shows promise to afford potent, selective and orally bioavailable compounds. PMID:25629509

  2. Interactive computer aided technology, evolution in the design/manufacturing process

    NASA Technical Reports Server (NTRS)

    English, C. H.

    1975-01-01

    A powerful computer-operated three dimensional graphic system and associated auxiliary computer equipment used in advanced design, production design, and manufacturing was described. This system has made these activities more productive than when using older and more conventional methods to design and build aerospace vehicles. With the use of this graphic system, designers are now able to define parts using a wide variety of geometric entities, define parts as fully surface 3-dimensional models as well as "wire-frame" models. Once geometrically defined, the designer is able to take section cuts of the surfaced model and automatically determine all of the section properties of the planar cut, lightpen detect all of the surface patches and automatically determine the volume and weight of the part. Further, his designs are defined mathematically at a degree of accuracy never before achievable.

  3. Computer-aided engineering system for design of sequence arrays and lithographic masks

    DOEpatents

    Hubbell, Earl A.; Morris, MacDonald S.; Winkler, James L.

    1999-01-05

    An improved set of computer tools for forming arrays. According to one aspect of the invention, a computer system (100) is used to select probes and design the layout of an array of DNA or other polymers with certain beneficial characteristics. According to another aspect of the invention, a computer system uses chip design files (104) to design and/or generate lithographic masks (110).

  4. Computer-aided engineering system for design of sequence arrays and lithographic masks

    DOEpatents

    Hubbell, Earl A.; Morris, MacDonald S.; Winkler, James L.

    1996-01-01

    An improved set of computer tools for forming arrays. According to one aspect of the invention, a computer system (100) is used to select probes and design the layout of an array of DNA or other polymers with certain beneficial characteristics. According to another aspect of the invention, a computer system uses chip design files (104) to design and/or generate lithographic masks (110).

  5. Computer-aided engineering system for design of sequence arrays and lithographic masks

    DOEpatents

    Hubbell, E.A.; Morris, M.S.; Winkler, J.L.

    1999-01-05

    An improved set of computer tools for forming arrays is disclosed. According to one aspect of the invention, a computer system is used to select probes and design the layout of an array of DNA or other polymers with certain beneficial characteristics. According to another aspect of the invention, a computer system uses chip design files to design and/or generate lithographic masks. 14 figs.

  6. Computer-aided engineering system for design of sequence arrays and lithographic masks

    DOEpatents

    Hubbell, E.A.; Morris, M.S.; Winkler, J.L.

    1996-11-05

    An improved set of computer tools for forming arrays is disclosed. According to one aspect of the invention, a computer system is used to select probes and design the layout of an array of DNA or other polymers with certain beneficial characteristics. According to another aspect of the invention, a computer system uses chip design files to design and/or generate lithographic masks. 14 figs.

  7. Computer-aided engineering system for design of sequence arrays and lithographic masks

    DOEpatents

    Hubbell, E.A.; Lipshutz, R.J.; Morris, M.S.; Winkler, J.L.

    1997-01-14

    An improved set of computer tools for forming arrays is disclosed. According to one aspect of the invention, a computer system is used to select probes and design the layout of an array of DNA or other polymers with certain beneficial characteristics. According to another aspect of the invention, a computer system uses chip design files to design and/or generate lithographic masks. 14 figs.

  8. Computer-aided design of curved surfaces with automatic model generation

    NASA Technical Reports Server (NTRS)

    Staley, S. M.; Jerard, R. B.; White, P. R.

    1980-01-01

    The design and visualization of three-dimensional objects with curved surfaces have always been difficult. The paper given below describes a computer system which facilitates both the design and visualization of such surfaces. The system enhances the design of these surfaces by virtue of various interactive techniques coupled with the application of B-Spline theory. Visualization is facilitated by including a specially built model-making machine which produces three-dimensional foam models. Thus, the system permits the designer to produce an inexpensive model of the object which is suitable for evaluation and presentation.

  9. Methodology of Computer-Aided Design of Variable Guide Vanes of Aircraft Engines

    ERIC Educational Resources Information Center

    Falaleev, Sergei V.; Melentjev, Vladimir S.; Gvozdev, Alexander S.

    2016-01-01

    The paper presents a methodology which helps to avoid a great amount of costly experimental research. This methodology includes thermo-gas dynamic design of an engine and its mounts, the profiling of compressor flow path and cascade design of guide vanes. Employing a method elaborated by Howell, we provide a theoretical solution to the task of…

  10. The role and application of data base management in integrated computer-aided design

    NASA Technical Reports Server (NTRS)

    Blackburn, C. L.; Storaasli, O. O.; Fulton, R. E.

    1982-01-01

    The need to marshal the extensive data that figure in design problems is underlined. An approach to managing engineering data for use in a computerized integrated design system is described. The approach is embodied in an experimental integrated software system that is used to demonstrate and evaluate such data management functions as storage, retrieval, query, manipulation, and modification. The development and organization of the experimental integrated design system and the application of the system to selected test problems are discussed, together with insights into data management issues gained from the study.

  11. Automotive technicians' training as a community-of-practice: implications for the design of an augmented reality teaching aid.

    PubMed

    Anastassova, Margarita; Burkhardt, Jean-Marie

    2009-07-01

    The paper presents an ergonomic analysis carried out in the early phases of an R&D project. The purpose was to investigate the functioning of today's Automotive Service Technicians (ASTs) training in order to inform the design of an Augmented Reality (AR) teaching aid. The first part of the paper presents a literature review of some major problems encountered by ASTs today. The benefits of AR as technological aid are also introduced. Then, the methodology and the results of two case studies are presented. The first study is based on interviews with trainers and trainees; the second one on observations in real training settings. The results support the assumption that today's ASTs' training could be regarded as a community-of-practice (CoP). Therefore, AR could be useful as a collaboration tool, offering a shared virtual representation of real vehicle's parts, which are normally invisible unless dismantled (e.g. the parts of a hydraulic automatic transmission). We conclude on the methods and the technologies to support the automotive CoP. PMID:18703179

  12. Automotive technicians' training as a community-of-practice: implications for the design of an augmented reality teaching aid.

    PubMed

    Anastassova, Margarita; Burkhardt, Jean-Marie

    2009-07-01

    The paper presents an ergonomic analysis carried out in the early phases of an R&D project. The purpose was to investigate the functioning of today's Automotive Service Technicians (ASTs) training in order to inform the design of an Augmented Reality (AR) teaching aid. The first part of the paper presents a literature review of some major problems encountered by ASTs today. The benefits of AR as technological aid are also introduced. Then, the methodology and the results of two case studies are presented. The first study is based on interviews with trainers and trainees; the second one on observations in real training settings. The results support the assumption that today's ASTs' training could be regarded as a community-of-practice (CoP). Therefore, AR could be useful as a collaboration tool, offering a shared virtual representation of real vehicle's parts, which are normally invisible unless dismantled (e.g. the parts of a hydraulic automatic transmission). We conclude on the methods and the technologies to support the automotive CoP.

  13. Readability and Test-Retest Reliability of a Psychometric Instrument Designed to Assess HIV/AIDS Attitudes, Beliefs, Behaviours and Sources of HIV Prevention Information of Young Adults

    ERIC Educational Resources Information Center

    Balogun, Joseph; Abiona, Titilayo; Lukobo-Durrell, Mainza; Adefuye, Adedeji; Amosun, Seyi; Frantz, Jose; Yakut, Yavuz

    2011-01-01

    Objective: This comparative study evaluated the readability and test-retest reliability of a questionnaire designed to assess the attitudes, beliefs behaviours and sources of information about HIV/AIDS among young adults recruited from universities in the United States of America (USA), Turkey and South Africa. Design/Setting: The instrument was…

  14. Computer-Aided Design of Organic Host Architectures for Selective Chemosensors

    SciTech Connect

    Hay, Benjamin; Bryantsev, Vyacheslav S.

    2009-01-01

    Selective organic hosts provide the foundation for the development of many types of sensors. The deliberate design of host molecules with predetermined selectivity, however, remains a challenge in supramolecular chemistry. To address this issue we have developed a de novo structure-based design approach for the unbiased construction of complementary host architectures. This chapter summarizes recent progress including improvements on a computer software program, HostDesigner, specifically tailored to discover host architectures for small guest molecules. HostDesigner is capable of generating and evaluating millions of candidate structures in minutes on a desktop personal computer, allowing a user to rapidly identify three-dimensional architectures that are structurally organized for binding a targeted guest species. The efficacy of this computational methodology is illustrated with a search for cation hosts containing aliphatic ether oxygen groups and anion hosts containing urea groups.

  15. Computer-aided design of a BPSK spread-spectrum chip set

    NASA Astrophysics Data System (ADS)

    Jain, Rajeev; Samueli, Henry; Yang, Paul T.; Chien, Charles; Chen, Gloria G.; Lau, Linda K.; Chung, Bong-Young; Cohen, Etan G.

    1992-01-01

    The design of a binary-phase shift-keyed (BPSK) spread-spectrum chip set with an integrated CAD environment called VANDA is described. VANDA uses the functional compiler concept to integrate system and physical designs, thus allowing complex high-performance integrated circuit chips to be implemented easily. Three functional compilers have been designed and implemented for the design of a spread-spectrum transceiver: a pseudonoise (PN) generator compiler, a direct digital frequency synthesizer (DDFS) compiler, and a Costas loop compiler. Three test chips for a BPSK digital intermediate frequency (IF) spread-spectrum system generated by these compilers have been fabricated and tested. Details of each of the functional compilers and the test chips are described. In addition, the measurement results for digital IF transceiver test boards constructed using these chips are presented.

  16. Merlin: Computer-Aided Oligonucleotide Design for Large Scale Genome Engineering with MAGE.

    PubMed

    Quintin, Michael; Ma, Natalie J; Ahmed, Samir; Bhatia, Swapnil; Lewis, Aaron; Isaacs, Farren J; Densmore, Douglas

    2016-06-17

    Genome engineering technologies now enable precise manipulation of organism genotype, but can be limited in scalability by their design requirements. Here we describe Merlin ( http://merlincad.org ), an open-source web-based tool to assist biologists in designing experiments using multiplex automated genome engineering (MAGE). Merlin provides methods to generate pools of single-stranded DNA oligonucleotides (oligos) for MAGE experiments by performing free energy calculation and BLAST scoring on a sliding window spanning the targeted site. These oligos are designed not only to improve recombination efficiency, but also to minimize off-target interactions. The application further assists experiment planning by reporting predicted allelic replacement rates after multiple MAGE cycles, and enables rapid result validation by generating primer sequences for multiplexed allele-specific colony PCR. Here we describe the Merlin oligo and primer design procedures and validate their functionality compared to OptMAGE by eliminating seven AvrII restriction sites from the Escherichia coli genome.

  17. Computer-aided design for smoke management in atria and covered malls

    SciTech Connect

    Milke, J.A.; Mowrer, F.W.

    1994-12-31

    A computer model that can assist designers in evaluating a smoke management system for an atrium or a covered mall was developed recently. The algorithm, which is the result of an initial effort to adapt zone modeling for atrium applications, could become an ASHRAE design tool. Evolution into such a standard tool requires validation of the numerical algorithm to assess its appropriateness for evaluating smoke management systems in spaces with large volumes and tall ceilings.

  18. Preconditioner and convergence study for the Quantum Computer Aided Design (QCAD) nonlinear poisson problem posed on the Ottawa Flat 270 design geometry.

    SciTech Connect

    Kalashnikova, Irina

    2012-05-01

    A numerical study aimed to evaluate different preconditioners within the Trilinos Ifpack and ML packages for the Quantum Computer Aided Design (QCAD) non-linear Poisson problem implemented within the Albany code base and posed on the Ottawa Flat 270 design geometry is performed. This study led to some new development of Albany that allows the user to select an ML preconditioner with Zoltan repartitioning based on nodal coordinates, which is summarized. Convergence of the numerical solutions computed within the QCAD computational suite with successive mesh refinement is examined in two metrics, the mean value of the solution (an L{sup 1} norm) and the field integral of the solution (L{sup 2} norm).

  19. How bioethics principles can aid design of electronic health records to accommodate patient granular control.

    PubMed

    Meslin, Eric M; Schwartz, Peter H

    2015-01-01

    Ethics should guide the design of electronic health records (EHR), and recognized principles of bioethics can play an important role. This approach was recently adopted by a team of informaticists who are designing and testing a system where patients exert granular control over who views their personal health information. While this method of building ethics in from the start of the design process has significant benefits, questions remain about how useful the application of bioethics principles can be in this process, especially when principles conflict. For instance, while the ethical principle of respect for autonomy supports a robust system of granular control, the principles of beneficence and nonmaleficence counsel restraint due to the danger of patients being harmed by restrictions on provider access to data. Conflict between principles has long been recognized by ethicists and has even motivated attacks on approaches that state and apply principles. In this paper, we show how using ethical principles can help in the design of EHRs by first explaining how ethical principles can and should be used generally, and then by discussing how attention to details in specific cases can show that the tension between principles is not as bad as it initially appeared. We conclude by suggesting ways in which the application of these (and other) principles can add value to the ongoing discussion of patient involvement in their health care. This is a new approach to linking principles to informatics design that we expect will stimulate further interest.

  20. VPIsystems industry training program on computer-aided design of fiber optic communication systems

    NASA Astrophysics Data System (ADS)

    Richter, Andre; Chan, David K. C.

    2002-05-01

    In industry today, professional Photonic Design Automation (PDA) tools are a necessity to enable fast development cycles for the design of optical components, systems and networks. The training of industrial personnel is of great importance in facilitating the full usability of PDA tools tailored to meet these demands. As the market leader of design and planning tools for system integrators and manufacturers of optical transmission systems and components, VPIsystems offers a set of two-day training courses. Attendees are taught on the design of metro WDM networks, high speed DWDM and ultra long-haul WDM systems, analogue and digital cable access systems, EDFA and Raman amplifiers, as well as active devices and circuits. The course work compromises of: (1) lectures on physical and modeling background topics; (2) creation of typical simulation scenarios and; (3) the analysis of results. This course work is facilitated by guided, hands-on lab exercises using VPIsystems software for a variety of practical design situations. In classes of up to 15, each attendee is allocated a computer, thereby allowing for a thorough and speedy training for the individual in all of the covered topics as well as for any extra-curriculum topics to be covered. Since 1999, more than 750 people have graduated from over 60 training courses. In this paper, details of VPIsystems Industry training program will be presented.

  1. Opportunities for Russian Nuclear Weapons Institute developing computer-aided design programs for pharmaceutical drug discovery. Final report

    SciTech Connect

    1996-09-23

    The goal of this study is to determine whether physicists at the Russian Nuclear Weapons Institute can profitably service the need for computer aided drug design (CADD) programs. The Russian physicists` primary competitive advantage is their ability to write particularly efficient code able to work with limited computing power; a history of working with very large, complex modeling systems; an extensive knowledge of physics and mathematics, and price competitiveness. Their primary competitive disadvantage is their lack of biology, and cultural and geographic issues. The first phase of the study focused on defining the competitive landscape, primarily through interviews with and literature searches on the key providers of CADD software. The second phase focused on users of CADD technology to determine deficiencies in the current product offerings, to understand what product they most desired, and to define the potential demand for such a product.

  2. Machine vision and the World Wide Web: design and training aids

    NASA Astrophysics Data System (ADS)

    Whelan, Paul F.; Batchelor, Bruce G.; Lewis, Melanie R. F.; Hack, Ralf

    1997-09-01

    The World Wide Web (WWW) offers the chance to generate a comprehensive collection of reference material, expert systems, programs, databases, image archives, image analysis and other tools for assisting practicing vision systems design engineers. The WWW is also an ideal medium for disseminating material for training students, educating would-be customers and new users of machine vision systems technology. The paper explores the potential for WWW-based material, and highlights some of the resources that are available today. A major purpose of this article, however, is to appeal for help in developing a comprehensive set of design and reference material that will allow highly reliable and accurate visual inspection, monitoring and control systems to be designed in future, with a minimum of effort.

  3. CFD aided optimization of an innovative SCR catalyst design for heavy-duty marine diesel engines

    NASA Astrophysics Data System (ADS)

    Krastev, V. K.; Russo, S.; Verdemare, D.; Recine, G.; Biferale, L.; Falcucci, G.

    2016-06-01

    In this paper, the design of a new system for reducing NOx from exhaust gases from marine engines is shown. The core of the system is represented by the Selective Catalytic Reduction (SCR) reactor, in which the catalyst is made of titanium dioxide nano-fibers functionalized with metal oxides and deposited by electrospinning on a corrugated metal support. Compared to the current monolithic reactor designs, the high specific surface offered by the fibers allows in principle to satisfy the TIER III emission standards, with a consistent saving in the reactor volume. To optimize the reactor design process, a Computational Fluid Dynamics (CFD) model has been developed, alongside experimental measurements and numerical simulations. Results of different configurations are reported and critically assessed.

  4. Development of a Computer-Aided-Design-Based Geometry and Mesh Movement Algorithm for Three-Dimensional Aerodynamic Shape Optimization

    NASA Astrophysics Data System (ADS)

    Truong, Anh Hoang

    This thesis focuses on the development of a Computer-Aided-Design (CAD)-based geometry parameterization method and a corresponding surface mesh movement algorithm suitable for three-dimensional aerodynamic shape optimization. The geometry parameterization method includes a geometry control tool to aid in the construction and manipulation of a CAD geometry through a vendor-neutral application interface, CAPRI. It automates the tedious part of the construction phase involving data entry and provides intuitive and effective design variables that allow for both the flexibility and the precision required to control the movement of the geometry. The surface mesh movement algorithm, on the other hand, transforms an initial structured surface mesh to fit the new geometry using a discrete representation of the new CAD surface provided by CAPRI. Using a unique mapping procedure, the algorithm not only preserves the characteristics of the original surface mesh, but also guarantees that the new mesh points are on the CAD geometry. The new surface mesh is then smoothed in the parametric space before it is transformed back into three-dimensional space. The procedure is efficient in that all the processing is done in the parametric space, incurring minimal computational cost. The geometry parameterization and mesh movement tools are integrated into a three-dimensional shape optimization framework, with a linear-elasticity volume-mesh movement algorithm, a Newton-Krylov flow solver for the Euler equations, and a gradient-based optimizer. The validity and accuracy of the CAD-based optimization algorithm are demonstrated through a number of verification and optimization cases.

  5. AstexViewer: a visualisation aid for structure-based drug design.

    PubMed

    Hartshorn, Michael J

    2002-12-01

    AstexViewer is a Java molecular graphics program that can be used for visualisation in many aspects of structure-based drug design. This paper describes its functionality, implementation and examples of its use. The program can run as an Applet in a web browser allowing structures to be displayed without installing additional software. Applications of its use are described for visualisation and as part of a structure based design platform. The software is being made freely available to the community and may be downloaded from http://www.astex-technology.com/AstexViewer. PMID:12825620

  6. AESOP: A computer-aided design program for linear multivariable control systems

    NASA Technical Reports Server (NTRS)

    Lehtinen, B.; Geyser, L. C.

    1982-01-01

    An interactive computer program (AESOP) which solves quadratic optimal control and is discussed. The program can also be used to perform system analysis calculations such as transient and frequency responses, controllability, observability, etc., in support of the control and filter design computations.

  7. Computer Aided Design of Ka-Band Waveguide Power Combining Architectures for Interplanetary Spacecraft

    NASA Technical Reports Server (NTRS)

    Vaden, Karl R.

    2006-01-01

    Communication systems for future NASA interplanetary spacecraft require transmitter power ranging from several hundred watts to kilowatts. Several hybrid junctions are considered as elements within a corporate combining architecture for high power Ka-band space traveling-wave tube amplifiers (TWTAs). This report presents the simulated transmission characteristics of several hybrid junctions designed for a low loss, high power waveguide based power combiner.

  8. Computer-aided design of peptide near infrared fluorescent probe for tumor diagnosis

    NASA Astrophysics Data System (ADS)

    Zhang, Congying; Gu, Yueqing

    2014-09-01

    Integrin αvβ3 receptors are expressed on activated endothelial cells during neovascularization to maintain tumor growth, so they become hot research tagets in cancer diagnosis. Peptides possess several attractive features when compared to protein and small molecule, such as small size and high structural compatibility with target proteins. Efficient design of high-affinity peptide ligands to Integrin αvβ3 receptors has been an important problem. Designed peptides in silico provide a valuable and high-selectivity peptide, meanwhile decrease the time of drug screening. In this study, we design peptide which can bind with integrin αvβ3 via computer, and then synthesis near infrared fluorescent probe. The characterization of this near infrared fluorescent probe was detected by UV. To investigate the tumor cell targeting of this probe, it was labeled with visible fluorescent dye Rhodamine B (RhB) for microscopy. To evaluate the targeting capability of this near infrared fluorescent probe, mice bearing integrin αvβ3 positive tumor xenografts were used. In vitro cellular experiments indicated that this probe have a clear binding affinity to αvβ3-positive tumor cells. In vivo experiments confirmed the receptor binding specificity of this probe. The peptide of computational design can bind with integrin αvβ3. Combined peptide near-infrared fluorescent probe with imaging technology use for clinical and tumor diagnosis have a greater development in future.

  9. A dc model for power switching transistors suitable for computer-aided design and analysis

    NASA Technical Reports Server (NTRS)

    Wilson, P. M.; George, R. T., Jr.; Owen, H. A.; Wilson, T. G.

    1979-01-01

    A model for bipolar junction power switching transistors whose parameters can be readily obtained by the circuit design engineer, and which can be conveniently incorporated into standard computer-based circuit analysis programs is presented. This formulation results from measurements which may be made with standard laboratory equipment. Measurement procedures, as well as a comparison between actual and computed results, are presented.

  10. Computer Aided Instruction for a Course in Boolean Algebra and Logic Design. Final Report (Revised).

    ERIC Educational Resources Information Center

    Roy, Rob

    The use of computers to prepare deficient college and graduate students for courses that build upon previously acquired information would solve the growing problem of professors who must spend up to one third of their class time in review of material. But examination of students who were taught Boolean Algebra and Logic Design by means of Computer…

  11. A semi-automatic computer-aided method for surgical template design

    NASA Astrophysics Data System (ADS)

    Chen, Xiaojun; Xu, Lu; Yang, Yue; Egger, Jan

    2016-02-01

    This paper presents a generalized integrated framework of semi-automatic surgical template design. Several algorithms were implemented including the mesh segmentation, offset surface generation, collision detection, ruled surface generation, etc., and a special software named TemDesigner was developed. With a simple user interface, a customized template can be semi- automatically designed according to the preoperative plan. Firstly, mesh segmentation with signed scalar of vertex is utilized to partition the inner surface from the input surface mesh based on the indicated point loop. Then, the offset surface of the inner surface is obtained through contouring the distance field of the inner surface, and segmented to generate the outer surface. Ruled surface is employed to connect inner and outer surfaces. Finally, drilling tubes are generated according to the preoperative plan through collision detection and merging. It has been applied to the template design for various kinds of surgeries, including oral implantology, cervical pedicle screw insertion, iliosacral screw insertion and osteotomy, demonstrating the efficiency, functionality and generality of our method.

  12. A semi-automatic computer-aided method for surgical template design

    PubMed Central

    Chen, Xiaojun; Xu, Lu; Yang, Yue; Egger, Jan

    2016-01-01

    This paper presents a generalized integrated framework of semi-automatic surgical template design. Several algorithms were implemented including the mesh segmentation, offset surface generation, collision detection, ruled surface generation, etc., and a special software named TemDesigner was developed. With a simple user interface, a customized template can be semi- automatically designed according to the preoperative plan. Firstly, mesh segmentation with signed scalar of vertex is utilized to partition the inner surface from the input surface mesh based on the indicated point loop. Then, the offset surface of the inner surface is obtained through contouring the distance field of the inner surface, and segmented to generate the outer surface. Ruled surface is employed to connect inner and outer surfaces. Finally, drilling tubes are generated according to the preoperative plan through collision detection and merging. It has been applied to the template design for various kinds of surgeries, including oral implantology, cervical pedicle screw insertion, iliosacral screw insertion and osteotomy, demonstrating the efficiency, functionality and generality of our method. PMID:26843434

  13. Nonlinear QSAR modeling for predicting cytotoxicity of ionic liquids in leukemia rat cell line: an aid to green chemicals designing.

    PubMed

    Gupta, Shikha; Basant, Nikita; Singh, Kunwar P

    2015-08-01

    Safety assessment and designing of safer ionic liquids (ILs) are among the priorities of the chemists and toxicologists today. Computational approaches have been considered as appropriate methods for prior safety assessment of chemicals and tools to aid in structural designing. The present study is an attempt to investigate the chemical attributes of a wide variety of ILs towards their cytotoxicity in leukemia rat cell line IPC-81 through the development of nonlinear quantitative structure-activity relationship (QSAR) models in the light of the OECD principles for QSAR development. Here, the cascade correlation network (CCN), probabilistic neural network (PNN), and generalized regression neural networks (GRNN) QSAR models were established for the discrimination of ILs in four categories of cytotoxicity and their end-point prediction using few simple descriptors. The diversity and nonlinearity of the considered dataset were evaluated through computing the Euclidean distance and Brock-Dechert-Scheinkman statistics. The constructed QSAR models were validated with external test data. The predictive power of these models was established through a variety of stringent parameters recommended in QSAR literature. The classification QSARs rendered the accuracy of >86%, and the regression models yielded correlation (R(2)) of >0.90 in test data. The developed QSAR models exhibited high statistical confidence and identified the structural elements of the ILs responsible for their cytotoxicity and, hence, could be useful tools in structural designing of safer and green ILs.

  14. Molecular modeling and computer aided drug design. Examples of their applications in medicinal chemistry.

    PubMed

    Ooms, F

    2000-02-01

    The development of new drugs with potential therapeutic applications is one of the most complex and difficult process in the pharmaceutical industry. Millions of dollars and man-hours are devoted to the discovery of new therapeutical agents. As, the activity of a drug is the result of a multitude of factors such as bioavailability, toxicity and metabolism, rational drug design has been utopias for centuries. Very recently, impressive technological advances in areas such as structural characterization of biomacromolecules, computer sciences and molecular biology have made rational drug design feasible. The aim of this review is to give an outline of studies in the field of medicinal chemistry in which molecular modeling has helped in the discovery process of new drugs. The emphasis will be on lead generation and optimization.

  15. Use of hand-held calculator program aids analysis of subsea pipeline design

    SciTech Connect

    Tran, V.B.

    1983-02-14

    The presented SEALINE program (developed for the Hewlett Packard HP-41 calculator) simulates the behavior of the developed transport pipeline after the installation phase. It is often necessary to review the behavior of pipe during the operating phase concerning the proposed environmental condition of the proposed location. It is pointed out that analyses of pipelines designed for transportation of liquid median such as crude oil or deballast water are usually addressed with sophisticated programs for large computers.

  16. Advanced earth observation spacecraft computer-aided design software: Technical, user and programmer guide

    NASA Technical Reports Server (NTRS)

    Farrell, C. E.; Krauze, L. D.

    1983-01-01

    The IDEAS computer of NASA is a tool for interactive preliminary design and analysis of LSS (Large Space System). Nine analysis modules were either modified or created. These modules include the capabilities of automatic model generation, model mass properties calculation, model area calculation, nonkinematic deployment modeling, rigid-body controls analysis, RF performance prediction, subsystem properties definition, and EOS science sensor selection. For each module, a section is provided that contains technical information, user instructions, and programmer documentation.

  17. Computer-aided rational design of novel EBF analogues with an aromatic ring.

    PubMed

    Wang, Shanshan; Sun, Yufeng; Du, Shaoqing; Qin, Yaoguo; Duan, Hongxia; Yang, Xinling

    2016-06-01

    Odorant binding proteins (OBPs) are important in insect olfactory recognition. These proteins bind specifically to insect semiochemicals and induce their seeking, mating, and alarm behaviors. Molecular docking and molecular dynamics simulations were performed to provide computational insight into the interaction mode between AgamOBP7 and novel (E)-β-farnesene (EBF) analogues with an aromatic ring. The ligand-binding cavity in OBP7 was found to be mostly hydrophobic due to the presence of several nonpolar residues. The interactions between the EBF analogues and the hydrophobic residues in the binding cavity increased in strength as the distance between them decreased. The EBF analogues with an N-methyl formamide or ester linkage had higher docking scores than those with an amide linkage. Moreover, delocalized π-π and electrostatic interactions were found to contribute significantly to the binding between the ligand benzene ring and nearby protein residues. To design new compounds with higher activity, four EBF analogues D1-D4 with a benzene ring were synthesized and evaluated based on their docking scores and binding affinities. D2, which had an N-methyl formamide group linkage, exhibited stronger binding than D1, which had an amide linkage. D4 exhibited particularly strong binding due to multiple hydrophobic interactions with the protein. This study provides crucial foundations for designing novel EBF analogues based on the OBP structure. Graphical abstract The design strategy of new EBF analogues based on the OBP7 structure. PMID:27251400

  18. Computer-aided rational design of novel EBF analogues with an aromatic ring.

    PubMed

    Wang, Shanshan; Sun, Yufeng; Du, Shaoqing; Qin, Yaoguo; Duan, Hongxia; Yang, Xinling

    2016-06-01

    Odorant binding proteins (OBPs) are important in insect olfactory recognition. These proteins bind specifically to insect semiochemicals and induce their seeking, mating, and alarm behaviors. Molecular docking and molecular dynamics simulations were performed to provide computational insight into the interaction mode between AgamOBP7 and novel (E)-β-farnesene (EBF) analogues with an aromatic ring. The ligand-binding cavity in OBP7 was found to be mostly hydrophobic due to the presence of several nonpolar residues. The interactions between the EBF analogues and the hydrophobic residues in the binding cavity increased in strength as the distance between them decreased. The EBF analogues with an N-methyl formamide or ester linkage had higher docking scores than those with an amide linkage. Moreover, delocalized π-π and electrostatic interactions were found to contribute significantly to the binding between the ligand benzene ring and nearby protein residues. To design new compounds with higher activity, four EBF analogues D1-D4 with a benzene ring were synthesized and evaluated based on their docking scores and binding affinities. D2, which had an N-methyl formamide group linkage, exhibited stronger binding than D1, which had an amide linkage. D4 exhibited particularly strong binding due to multiple hydrophobic interactions with the protein. This study provides crucial foundations for designing novel EBF analogues based on the OBP structure. Graphical abstract The design strategy of new EBF analogues based on the OBP7 structure.

  19. Study Guide for First Aid Practices.

    ERIC Educational Resources Information Center

    Thygerson, Alton L.

    This study guide is designed to accompany the American National Red Cross texts ADVANCED FIRST AID AND EMERGENCY CARE and STANDARD FIRST AID AND PERSONAL SAFETY. Part one serves as an introduction to first aid. The legal aspects of first aid are discussed along with a list of suggested first aid kit contents, and information on first aid books is…

  20. Solar chimney design: Investigating natural ventilation and cooling in offices with the aid of computer simulation

    NASA Astrophysics Data System (ADS)

    Angelis, Nikolaos

    Solar chimney design is investigated as a means of improving natural ventilation and passive cooling in office buildings. Existing scientific research and built precedents are generally limited literature review findings on various features of solar chimneys were categorised and used to develop a building simulation strategy. Using UK climatic data, simulations were performed on several computer models in order to investigate solar chimney performance during a single day period and an entire cooling season. Passive cooling with a solar chimney is possible but actual reduction in temperatures in most cases examined could be negligible. Cooling potential is increased on still, warm days, while the prospects for night cooling are further improved. A solar chimney may help reduce considerably the occurrence of resultant temperatures at or above the 25 C and 28 C thresholds. Solar chimney width, height, apertures and integral use of thermal mass are the most significant parameters for cooling. Simulation results showed that a solar chimney can increase significantly natural ventilation rates. Total ventilation rates may be increased by at least 22%. During still days a solar chimney can enhance ventilation rates by 36% or more. Stack ventilation through a solar chimney is typically 20% of cross ventilation during night time this may increase to at least 40-45% and on still days it may reach 100% of typical cross ventilation rates. Solar chimney induced stack ventilation and cross ventilation are interrelated. Resultant air flow patterns may have an important effect on convective heat transfers and thermal comfort. Climate and microclimate conditions should be an integral part of solar chimney design. Key aspects and recommendations regarding solar chimneys, passive cooling and natural ventilation are provided for design guidance and feedback in further research.

  1. PET/Computed Tomography in Breast Cancer: Can It Aid in Developing a Personalized Treatment Design?

    PubMed

    Suresh Malapure, Sumeet; Das, Kalpa Jyoti; Kumar, Rakesh

    2016-07-01

    PET with fluorodeoxyglucose (FDG-PET)/computed tomography (CT) imaging has significantly improved the management of breast cancer. FDG, however, is not tumor-specific and various image interpretation pitfalls may occur due to false-positive and false-negative causes of FDG uptake. PET/CT imaging with more specific radiopharmaceuticals may provide useful information about the pathophysiology in such cases. In the present article, we reviewed the use of whole-body FDG-PET/CT and (18)F-16α-17β-Fluoroestradiol PET/CT imaging to determine if these can be used to develop personalized treatment design for the better management of breast cancer. PMID:27321033

  2. Computer-Aided Design of Materials for use under High Temperature Operating Condition

    SciTech Connect

    Rajagopal, K. R.; Rao, I. J.

    2010-01-31

    The procedures in place for producing materials in order to optimize their performance with respect to creep characteristics, oxidation resistance, elevation of melting point, thermal and electrical conductivity and other thermal and electrical properties are essentially trial and error experimentation that tend to be tremendously time consuming and expensive. A computational approach has been developed that can replace the trial and error procedures in order that one can efficiently design and engineer materials based on the application in question can lead to enhanced performance of the material, significant decrease in costs and cut down the time necessary to produce such materials. The work has relevance to the design and manufacture of turbine blades operating at high operating temperature, development of armor and missiles heads; corrosion resistant tanks and containers, better conductors of electricity, and the numerous other applications that are envisaged for specially structured nanocrystalline solids. A robust thermodynamic framework is developed within which the computational approach is developed. The procedure takes into account microstructural features such as the dislocation density, lattice mismatch, stacking faults, volume fractions of inclusions, interfacial area, etc. A robust model for single crystal superalloys that takes into account the microstructure of the alloy within the context of a continuum model is developed. Having developed the model, we then implement in a computational scheme using the software ABAQUS/STANDARD. The results of the simulation are compared against experimental data in realistic geometries.

  3. SensiPath: computer-aided design of sensing-enabling metabolic pathways.

    PubMed

    Delépine, Baudoin; Libis, Vincent; Carbonell, Pablo; Faulon, Jean-Loup

    2016-07-01

    Genetically-encoded biosensors offer a wide range of opportunities to develop advanced synthetic biology applications. Circuits with the ability of detecting and quantifying intracellular amounts of a compound of interest are central to whole-cell biosensors design for medical and environmental applications, and they also constitute essential parts for the selection and regulation of high-producer strains in metabolic engineering. However, the number of compounds that can be detected through natural mechanisms, like allosteric transcription factors, is limited; expanding the set of detectable compounds is therefore highly desirable. Here, we present the SensiPath web server, accessible at http://sensipath.micalis.fr SensiPath implements a strategy to enlarge the set of detectable compounds by screening for multi-step enzymatic transformations converting non-detectable compounds into detectable ones. The SensiPath approach is based on the encoding of reactions through signature descriptors to explore sensing-enabling metabolic pathways, which are putative biochemical transformations of the target compound leading to known effectors of transcription factors. In that way, SensiPath enlarges the design space by broadening the potential use of biosensors in synthetic biology applications.

  4. Modified optimal control pilot model for computer-aided design and analysis

    NASA Technical Reports Server (NTRS)

    Davidson, John B.; Schmidt, David K.

    1992-01-01

    This paper presents the theoretical development of a modified optimal control pilot model based upon the optimal control model (OCM) of the human operator developed by Kleinman, Baron, and Levison. This model is input compatible with the OCM and retains other key aspects of the OCM, such as a linear quadratic solution for the pilot gains with inclusion of control rate in the cost function, a Kalman estimator, and the ability to account for attention allocation and perception threshold effects. An algorithm designed for each implementation in current dynamic systems analysis and design software is presented. Example results based upon the analysis of a tracking task using three basic dynamic systems are compared with measured results and with similar analyses performed with the OCM and two previously proposed simplified optimal pilot models. The pilot frequency responses and error statistics obtained with this modified optimal control model are shown to compare more favorably to the measured experimental results than the other previously proposed simplified models evaluated.

  5. Comparisons of Wilson-Fowler and Parametric Cubic Splines with the Curve-Fitting Algorithms of Several Computer-Aided Design Systems

    SciTech Connect

    Birchler, W.D.; Schilling, S.A.

    2001-02-01

    The purpose of this report is to demonstrate that modern computer-aided design (CAD), computer-aided manufacturing (CAM), and computer-aided engineering (CAE) systems can be used in the Department of Energy (DOE) Nuclear Weapons Complex (NWC) to design new and remodel old products, fabricate old and new parts, and reproduce legacy data within the inspection uncertainty limits. In this study, two two-dimensional splines are compared with several modern CAD curve-fitting modeling algorithms. The first curve-fitting algorithm is called the Wilson-Fowler Spline (WFS), and the second is called a parametric cubic spline (PCS). Modern CAD systems usually utilize either parametric cubic and/or B-splines.

  6. A Pilot Computer-Aided Design and Manufacturing Curriculum that Promotes Engineering

    NASA Technical Reports Server (NTRS)

    2002-01-01

    Elizabeth City State University (ECSU) is located in a community that is mostly rural in nature. The area is economically deprived when compared to the rest of the state. Many businesses lack the computerized equipment and skills needed to propel upward in today's technologically advanced society. This project will close the ever-widening gap between advantaged and disadvantaged workers as well as increase their participation with industry, NASA and/or other governmental agencies. Everyone recognizes computer technology as the catalyst for advances in design, prototyping, and manufacturing or the art of machining. Unprecedented quality control and cost-efficiency improvements are recognized through the use of computer technology. This technology has changed the manufacturing industry with advanced high-tech capabilities needed by NASA. With the ever-widening digital divide, we must continue to provide computer technology to those who are socio-economically disadvantaged.

  7. Designing for the home: a comparative study of support aids for central heating systems.

    PubMed

    Sauer, J; Wastell, D G; Schmeink, C

    2009-03-01

    The study examined the influence of different types of enhanced system support on user performance during the management of a central heating system. A computer-based simulation of a central heating system, called CHESS V2.0, was used to model different interface options, providing different support facilities to the user (e.g., historical, predictive, and instructional displays). Seventy-five participants took part in the study and completed a series of operational scenarios under different support conditions. The simulation environment allowed the collection of performance measures (e.g., energy consumption), information sampling, and system control behaviour. Subjective user evaluations of various aspects of the system were also measured. The results showed performance gains for predictive displays whereas no such benefits were observed for the other display types. The data also revealed that status and predictive displays were valued most highly by users. The implications of the findings for designers of central heating systems are discussed. PMID:18433730

  8. Aerodynamic heating and surface temperatures on vehicles for computer-aided design studies

    NASA Technical Reports Server (NTRS)

    Dejarnette, F. R.; Kania, L. A.; Chitty, A.

    1983-01-01

    A computer subprogram has been developed to calculate aerodynamic and radiative heating rates and to determine surface temperatures by integrating the heating rates along the trajectory of a vehicle. Convective heating rates are calculated by applying the axisymmetric analogue to inviscid surface streamlines and using relatively simple techniques to calculate laminar, transitional, or turbulent heating rates. Options are provided for the selection of gas model, transition criterion, turbulent heating method, Reynolds Analogy factor, and entropy-layer swallowing effects. Heating rates are compared to experimental data, and the time history of surface temperatures are given for a high-speed trajectory. The computer subprogram is developed for preliminary design and mission analysis where parametric studies are needed at all speeds.

  9. Computer-aided design of reflector antennas - The Green Bank Radio Telescope

    NASA Astrophysics Data System (ADS)

    Terada, Marco A. B.; Stutzman, Warren L.

    1998-03-01

    This paper presents an evaluation of the electrical performance of the Green Bank Telescope (GBT) reflector antenna, operating as single- and dual-offset configurations, as well as a general overview of the GBT system. The GBT dual-offset Gregorian configuration is designed for low cross polarization (XPOL) using the dual-offset reflector antenna (DORA) synthesis package code. The procedure implemented in DORA to upgrade an existing main reflector to a low cross-polarized dual-offset Gregorian reflector antenna is also described. All computed patterns were obtained with the parabolic reflector analysis code (PRAC) program, and with the commercial code GRASP7. The GBT radiation patterns and performance values indicate that low XPOL performance can be achieved with a dual-offset configuration, provided that a low XPOL feed is used. The GBT configuration is employed as a case example for the aforementioned procedure.

  10. Building a computer-aided design capability using a standard time share operating system

    NASA Technical Reports Server (NTRS)

    Sobieszczanski, J.

    1975-01-01

    The paper describes how an integrated system of engineering computer programs can be built using a standard commercially available operating system. The discussion opens with an outline of the auxiliary functions that an operating system can perform for a team of engineers involved in a large and complex task. An example of a specific integrated system is provided to explain how the standard operating system features can be used to organize the programs into a simple and inexpensive but effective system. Applications to an aircraft structural design study are discussed to illustrate the use of an integrated system as a flexible and efficient engineering tool. The discussion concludes with an engineer's assessment of an operating system's capabilities and desirable improvements.

  11. Data Mining-Aided Crystal Engineering for the Design of Transparent Conducting Oxides: Preprint

    SciTech Connect

    Suh, C.; Kim, K.; Berry, J. J.; Lee, J.; Jones, W. B.

    2010-12-01

    The purpose of this paper is to accelerate the pace of material discovery processes by systematically visualizing the huge search space that conventionally needs to be explored. To this end, we demonstrate not only the use of empirical- or crystal chemistry-based physical intuition for decision-making, but also to utilize knowledge-based data mining methodologies in the context of finding p-type delafossite transparent conducting oxides (TCOs). We report on examples using high-dimensional visualizations such as radial visualization combined with machine learning algorithms such as k-nearest neighbor algorithm (k-NN) to better define and visualize the search space (i.e. structure maps) of functional materials design. The vital role of search space generated from these approaches is discussed in the context of crystal chemistry of delafossite crystal structure.

  12. Designing for the home: a comparative study of support aids for central heating systems.

    PubMed

    Sauer, J; Wastell, D G; Schmeink, C

    2009-03-01

    The study examined the influence of different types of enhanced system support on user performance during the management of a central heating system. A computer-based simulation of a central heating system, called CHESS V2.0, was used to model different interface options, providing different support facilities to the user (e.g., historical, predictive, and instructional displays). Seventy-five participants took part in the study and completed a series of operational scenarios under different support conditions. The simulation environment allowed the collection of performance measures (e.g., energy consumption), information sampling, and system control behaviour. Subjective user evaluations of various aspects of the system were also measured. The results showed performance gains for predictive displays whereas no such benefits were observed for the other display types. The data also revealed that status and predictive displays were valued most highly by users. The implications of the findings for designers of central heating systems are discussed.

  13. Table-aided design of the energy-storage reactor in dc-to-dc converters

    NASA Technical Reports Server (NTRS)

    Owen, H. A., Jr.

    1975-01-01

    A new procedure for the selection of magnetic cores for use in energy-storage dc-to-dc power converters which eliminates the need for an automated computer search algorithm and stored data file is presented. The converter configurations included in the procedure are the three commonly encountered single-winding converters for voltage step-up, for current step-up and for voltage step-up/current step-up, and for the two-winding converter for voltage step-up/current step-up. For each converter configuration, three types of controllers are considered - constant-frequency, constant on-time and constant off-time. Using concepts developed from analyses of these converters by considering the transfer of energy by means of an energy-storage inductor or transformer, a special table of parameters calculated from magnetic core data is constructed and leads to a considerably simplified design procedure.

  14. Design and experimental analysis of an advanced static VAR compensator with computer aided control.

    PubMed

    Irmak, Erdal; Bayındır, Ramazan; Köse, Ali

    2016-09-01

    This study presents integration of a real-time energy monitoring and control system with an advanced reactive power compensation unit based on fixed capacitor-thyristor controlled reactor (FC-TCR). Firing angles of the thyristors located in the FC-TCR are controlled by a microcontroller in order to keep the power factor within the limits. Electrical parameters of the system are measured by specially designed circuits and simultaneously transferred to the computer via a data acquisition board. Thus, real time data of the system can be observed through a visual user interface. The data obtained is not only analyzed for control process, but also regularly saved into a database. The system has been tested in laboratory conditions under different load characteristics and experimental results verified that the system successfully and accurately achieves compensation process against the all operational conditions.

  15. Planar array stack design aided by rapid prototyping in development of air-breathing PEMFC

    NASA Astrophysics Data System (ADS)

    Chen, Chen-Yu; Lai, Wei-Hsiang; Weng, Biing-Jyh; Chuang, Huey-Jan; Hsieh, Ching-Yuan; Kung, Chien-Chih

    The polymer electrolyte membrane fuel cell (PEMFC) is one of the most important research topics in the new and clean energy area. The middle or high power PEMFCs can be applied to the transportation or the distributed power system. But for the small power application, it is needed to match the power requirement of the product generally. On the other hand, the direct methanol fuel cell (DMFC) is one of the most common type that researchers are interested in, but recently the miniature or the micro-PEMFCs attract more attention due to their advantages of high open circuit voltage and high power density. The objective of this study is to develop a new air-breathing planar array fuel cell stacked from 10 cells made by rapid prototyping technology which has potential for fast commercial design, low cost manufacturing, and even without converters/inverters for the system. In this paper, the main material of flow field plates is acrylonitrile-butadiene-styrene (ABS) which allows the fuel cell be mass-manufactured by plastic injection molding technology. The rapid prototyping technology is applied to construct the prototype and verify the practicability of the proposed stack design. A 10-cell air-breathing miniature PEMFC stack with a volume of 6 cm × 6 cm × 0.9 cm is developed and tested. Its segmented membrane electrode assembly (MEA) is designed with the active surface area of 1.3 cm × 1.3 cm in each individual MEA. The platinum loading at anode and cathode are 0.2 mg cm -2 and 0.4 mg cm -2, respectively. Results show that the peak power densities of the parallel connected and serial connected stack are 99 mW cm -2 at 0.425 V and 92 mW cm -2 at 4.25 V, respectively under the conditions of 70 °C relative saturated humidity (i.e., dew point temperature), ambient temperature and free convection air. Besides, the stack performance is increased under forced convection. If the cell surface air is blown by an electric fan, the peak power densities of parallel connected and

  16. Rational Catalyst Design of Titanium-Silica Materials Aided by Site-Specific Titration Tools

    NASA Astrophysics Data System (ADS)

    Eaton, Todd Robert

    between particle and crystal size, as obtained from XRD. In the course of establishing these relationships we've gained the knowledge of how to control TiO x structure, which enables the design of new and better catalysts. Understanding the synthesis-structure-function relationships allow for the design of a tandem photo/thermocatalytic reaction system for producing and consuming H2O2. By partially overcoating a TiO 2 photocatalyst with a ˜2 nm silica layer we observe a 56-fold rate improvement compared to bare-TiO2 for H2O2 synthesis from the proton-assisted reduction of O2. Addition of metal-SiO2 thermocatalysts (metal=Ti, Nb, or Ta) with sites needed for H2O2 activation creates a tandem system wherein the H2O2 produced in situ is utilized for alkene epoxidation. Compared to a thermocatalytic-only system, the tandem system accelerates epoxidation for cis-cyclooctene(11x faster), styrene(20x) and 1-octene(30x). This approach demonstrates a means for epoxidation with O2 that avoids H2O2 purification and transport, simplifies the total process, provides new opportunities for control by independent H2O2 production and consumption in the same reactor, and enhances rates relative to thermocatalytic-only epoxidation by intimately coupling H2O2 generation and consumption. Critically, establishment of titanium-silica synthesis-structure-function relationships enables the design of new catalysts and systems that are less energy- and material-intensive, leading towards more sustainable chemistry.

  17. HIV / AIDS

    MedlinePlus

    ... Marketing Share this: Main Content Area Understanding HIV/AIDS AIDS was first reported in the United States in ... and has since become a major worldwide epidemic. AIDS is caused by the human immunodeficiency virus, or ...

  18. An interactive program for computer-aided map design, display, and query: EMAPKGS2

    USGS Publications Warehouse

    Pouch, G.W.

    1997-01-01

    EMAPKGS2 is a user-friendly, PC-based electronic mapping tool for use in hydrogeologic exploration and appraisal. EMAPKGS2 allows the analyst to construct maps interactively from data stored in a relational database, perform point-oriented spatial queries such as locating all wells within a specified radius, perform geographic overlays, and export the data to other programs for further analysis. EMAPKGS2 runs under Microsoft?? Windows??? 3.1 and compatible operating systems. EMAPKGS2 is a public domain program available from the Kansas Geological Survey. EMAPKGS2 is the centerpiece of WHEAT, the Windows-based Hydrogeologic Exploration and Appraisal Toolkit, a suite of user-friendly Microsoft?? Windows??? programs for natural resource exploration and management. The principal goals in development of WHEAT have been ease of use, hardware independence, low cost, and end-user extensibility. WHEAT'S native data format is a Microsoft?? Access?? database. WHEAT stores a feature's geographic coordinates as attributes so they can be accessed easily by the user. The WHEAT programs are designed to be used in conjunction with other Microsoft?? Windows??? software to allow the natural resource scientist to perform work easily and effectively. WHEAT and EMAPKGS have been used at several of Kansas' Groundwater Management Districts and the Kansas Geological Survey on groundwater management operations, groundwater modeling projects, and geologic exploration projects. ?? 1997 Elsevier Science Ltd.

  19. Computer-aided design of a novel ligand for retinoic acid receptor in cancer chemotherapy

    NASA Astrophysics Data System (ADS)

    Silva, Carlos H. T. P.; Leopoldino, Andreia M.; Silva, Eloiza H. T.; Espinoza, V. A. A.; Taft, C. A.

    The isotypes of RAR and RXR are retinoic acid and retinoid X acid receptors, respectively, whose ligand-binding domain contains the ligand-dependent activation function, with distinct pharmacological targets for retinoids, involved in the treatment of various cancers and skin diseases. Due to the major challenge which cancer treatment and cure still imposes after many decades to the international scientific community, there is actually considerable interest in new ligands with increased bioactivity. We have focused on the retinoid acid receptor, which is considered an interesting target for drug design. In this work, we carried out density functional geometry optimizations and different docking procedures. We performed screening in a large database (hundreds of thousands of molecules which we optimized at the AM1 level) yielding a set of potential bioactive ligands. A new ligand was selected and optimized at the B3LYP/6-31G* level. A flexible docking program was used to investigate the interactions between the receptor and the new ligand. The result of this work is compared with several crystallographic ligands of RAR. Our theoretically more bioactive new ligand indicates stronger and more hydrogen bonds as well as hydrophobic interactions with the receptor.

  20. Using queuing models to aid design and guide research effort for multimodality buried target detection systems

    NASA Astrophysics Data System (ADS)

    Malof, Jordan M.; Collins, Leslie M.

    2016-05-01

    Many remote sensing modalities have been developed for buried target detection (BTD), each one offering relative advantages over the others. There has been interest in combining several modalities into a single BTD system that benefits from the advantages of each constituent sensor. Recently an approach was developed, called multi-state management (MSM), that aims to achieve this goal by separating BTD system operation into discrete states, each with different sensor activity and system velocity. Additionally, a modeling approach, called Q-MSM, was developed to quickly analyze multi-modality BTD systems operating with MSM. This work extends previous work by demonstrating how Q-MSM modeling can be used to design BTD systems operating with MSM, and to guide research to yield the most performance benefits. In this work an MSM system is considered that combines a forward-looking infrared (FLIR) camera and a ground penetrating radar (GPR). Experiments are conducted using a dataset of real, field-collected, data which demonstrates how the Q-MSM model can be used to evaluate performance benefits of altering, or improving via research investment, various characteristics of the GPR and FLIR systems. Q-MSM permits fast analysis that can determine where system improvements will have the greatest impact, and can therefore help guide BTD research.

  1. A computer aided design approach for deep water tension leg platforms

    SciTech Connect

    Johnson, C.P.

    1994-12-31

    In this research, a software package was developed under the sponsorship of the Offshore Technology Research Center that is funded by the National Science Foundation and administered by The University of Texas at Austin and Texas A and M University. This software package (Johnson (1993)) was especially conceived for educational or research purposes with emphasis on user interfaces, automatic data generation and graphical display. As a result, a state-of-the-art workstation approach was developed that incorporates sound analysis procedures for deep water Tension Leg Platforms (TLPs). The TLP program (OTRC-TLP-2D93) is easy to use -- yet it is capable of producing real time graphical simulation of the structural response of TLPs in deep water. Several options are available for treating structural nonlinearities as well as nonlinearities in the forcing function based on Morison`s equation. The formulation is based on a two-dimensional model and accounts for a fully coupled analysis of the hull and tendons. The software is designed to handle wave, wind and deep currents with a rich set of user selectable options. General considerations for the software package and the underlying theory are presented. Numerical examples for a TLP subjected to wave, wind and current at an ocean depth of 5,000 feet are presented showing how the problem can be analyzed in a user friendly environment, complimented by the graphical interface developed.

  2. Computer Aided Drafting and Design, Industrial Manufacturing Technician, and Mechanical Engineering Technician and Machine Tool, Die and Moldmaking Technology. Tech Prep Competency Profile.

    ERIC Educational Resources Information Center

    Mid-East Ohio Tech Prep Consortium, Zanesville.

    This document contains competency profiles in four areas: computer-aided drafting and design; industrial manufacturing technician; mechanical engineering technician; and machine tool, die, and moldmaking technology occupations. The profiles are intended for use in articulating tech prep programs from high school through associate degrees in Ohio.…

  3. ''Beauty of Wholeness and Beauty of Partiality.'' New Terms Defining the Concept of Beauty in Architecture in Terms of Sustainability and Computer Aided Design

    ERIC Educational Resources Information Center

    Farid, Ayman A.; Zaghloul, Weaam M.; Dewidar, Khaled M.

    2014-01-01

    The great shift in sustainability and computer aided design in the field of architecture caused a remarkable change in the architecture philosophy, new aspects of beauty and aesthetic values are being introduced, and traditional definitions for beauty cannot fully cover this aspects, which causes a gap between; new architecture works criticism and…

  4. Eye-Tracking Measures Reveal How Changes in the Design of Aided AAC Displays Influence the Efficiency of Locating Symbols by School-Age Children without Disabilities

    ERIC Educational Resources Information Center

    Wilkinson, Krista M.; O'Neill, Tara; McIlvane, William J.

    2014-01-01

    Purpose: Many individuals with communication impairments use aided augmentative and alternative communication (AAC) systems involving letters, words, or line drawings that rely on the visual modality. It seems reasonable to suggest that display design should incorporate information about how users attend to and process visual information. The…

  5. Computer-Aided Drafting and Design Series. Educational Resources for the Machine Tool Industry, Course Syllabi, [and] Instructor's Handbook. Student Laboratory Manual.

    ERIC Educational Resources Information Center

    Texas State Technical Coll. System, Waco.

    This package consists of course syllabi, an instructor's handbook, and a student laboratory manual for a 2-year vocational training program to prepare students for entry-level employment in computer-aided drafting and design in the machine tool industry. The program was developed through a modification of the DACUM (Developing a Curriculum)…

  6. Theory aided design and analysis of dielectric and semiconductor components for organic field-effect transistors

    NASA Astrophysics Data System (ADS)

    Dibenedetto, Sara Arlene

    Perfluoroacyl/acyl-derivatized quaterthiophens are developed and synthesized. The frontier molecular orbital energies of these compounds are studied by optical spectroscopy and electrochemistry while solid-state/film properties are investigated by thermal analysis, x-ray diffraction, and scanning electron microscopy. Organic thin film transistors (OTFTs) performance parameters are discussed in terms of the interplay between semiconductor molecular energetics and film morphologies/microstructures. The majority charge carrier type and mobility exhibit a strong correlation with the regiochemistry of perfluoroarene incorporation. In quaterthiophene-based semiconductors, carbonyl-functionalization allows tuning of the majority carrier type from p-type to ambipolar and to n-type. In situ conversion of a p-type semiconducting film to n-type film is also demonstrated. The design of chemical and film microstructural alternative hybrid organic-inorganic gate dielectrics is described using the classic Clausius-Mossotti relation. The Maxwell-Wagner effective medium model is used to compute the effective dielectric permittivity of two types of dielectrics self-assembled nanodielectrics (SANDs) and crosslinked polymer blends (CPBs). In these calculations showing good agreement between theory and experiment, it is found that greater capacitances should be achievable with mixed composites than with layered composites. With this insight, a series of mixed metal oxide-polyolefin nanocomposites is synthesized via in-situ olefin polymerization using the single-site metallocene catalysts. By integrating organic and inorganic constituents, the resulting hybrid material exhibit high permittivity (from the inorganic inclusions) and high breakdown strength, mechanical flexibility, and facile processability (from the polymer matrices). In order to better optimize the capacitance and leakage current of hybrid organic-inorganic dielectrics, the capacitance, leakage current and OFET gate

  7. Understanding the structural basis of substrate recognition by Plasmodium falciparum plasmepsin V to aid in the design of potent inhibitors.

    PubMed

    Bedi, Rajiv K; Patel, Chandan; Mishra, Vandana; Xiao, Huogen; Yada, Rickey Y; Bhaumik, Prasenjit

    2016-01-01

    Plasmodium falciparum plasmepsin V (PfPMV) is an essential aspartic protease required for parasite survival, thus, considered as a potential drug target. This study reports the first detailed structural analysis and molecular dynamics simulation of PfPMV as an apoenzyme and its complexes with the substrate PEXEL as well as with the inhibitor saquinavir. The presence of pro-peptide in PfPMV may not structurally hinder the formation of a functionally competent catalytic active site. The structure of PfPMV-PEXEL complex shows that the unique positions of Glu179 and Gln222 are responsible for providing the specificity of PEXEL substrate with arginine at P3 position. The structural analysis also reveals that the S4 binding pocket in PfPMV is occupied by Ile94, Ala98, Phe370 and Tyr472, and therefore, does not allow binding of pepstatin, a potent inhibitor of most pepsin-like aspartic proteases. Among the screened inhibitors, the HIV-1 protease inhibitors and KNI compounds have higher binding affinities for PfPMV with saquinavir having the highest value. The presence of a flexible group at P2 and a bulky hydrophobic group at P3 position of the inhibitor is preferred in the PfPMV substrate binding pocket. Results from the present study will aid in the design of potent inhibitors of PMV. PMID:27531685

  8. Understanding the structural basis of substrate recognition by Plasmodium falciparum plasmepsin V to aid in the design of potent inhibitors

    PubMed Central

    Bedi, Rajiv K.; Patel, Chandan; Mishra, Vandana; Xiao, Huogen; Yada, Rickey Y.; Bhaumik, Prasenjit

    2016-01-01

    Plasmodium falciparum plasmepsin V (PfPMV) is an essential aspartic protease required for parasite survival, thus, considered as a potential drug target. This study reports the first detailed structural analysis and molecular dynamics simulation of PfPMV as an apoenzyme and its complexes with the substrate PEXEL as well as with the inhibitor saquinavir. The presence of pro-peptide in PfPMV may not structurally hinder the formation of a functionally competent catalytic active site. The structure of PfPMV-PEXEL complex shows that the unique positions of Glu179 and Gln222 are responsible for providing the specificity of PEXEL substrate with arginine at P3 position. The structural analysis also reveals that the S4 binding pocket in PfPMV is occupied by Ile94, Ala98, Phe370 and Tyr472, and therefore, does not allow binding of pepstatin, a potent inhibitor of most pepsin-like aspartic proteases. Among the screened inhibitors, the HIV-1 protease inhibitors and KNI compounds have higher binding affinities for PfPMV with saquinavir having the highest value. The presence of a flexible group at P2 and a bulky hydrophobic group at P3 position of the inhibitor is preferred in the PfPMV substrate binding pocket. Results from the present study will aid in the design of potent inhibitors of PMV. PMID:27531685

  9. A 3D computer-aided design system applied to diagnosis and treatment planning in orthodontics and orthognathic surgery.

    PubMed

    Motohashi, N; Kuroda, T

    1999-06-01

    The purpose of this article is to describe a newly developed 3D computer-aided design (CAD) system for the diagnostic set-up of casts in orthodontic diagnosis and treatment planning, and its preliminary clinical applications. The system comprises a measuring unit which obtains 3D information from the dental model using laser scanning, and a personal computer to generate the 3D graphics. When measuring the 3D shape of the model, to minimize blind sectors, the model is scanned from two different directions with the slit-ray laser beam by rotating the mounting angle of the model on the measuring device. For computed simulation of tooth movement, the representative planes, defined by the anatomical reference points, are formed for each individual tooth and are arranged along a guideline descriptive of the individual arch form. Subsequently, the 3D shape is imparted to each of the teeth arranged on the representative plane to form an arrangement of the 3D profile. When necessary, orthognathic surgery can be simulated by moving the mandibular dental arch three-dimensionally to establish the optimum occlusal relationship. Compared with hand-made set-up models, the computed diagnostic cast has advantages such as high-speed processing and quantitative evaluation on the amount of 3D movement of the individual tooth relative to the craniofacial plane. Trial clinical applications demonstrated that the use of this system facilitated the otherwise complicated and time-consuming mock surgery for treatment planning in orthognathic surgery.

  10. Development of problem-oriented software packages for numerical studies and computer-aided design (CAD) of gyrotrons

    NASA Astrophysics Data System (ADS)

    Damyanova, M.; Sabchevski, S.; Zhelyazkov, I.; Vasileva, E.; Balabanova, E.; Dankov, P.; Malinov, P.

    2016-03-01

    Gyrotrons are the most powerful sources of coherent CW (continuous wave) radiation in the frequency range situated between the long-wavelength edge of the infrared light (far-infrared region) and the microwaves, i.e., in the region of the electromagnetic spectrum which is usually called the THz-gap (or T-gap), since the output power of other devices (e.g., solid-state oscillators) operating in this interval is by several orders of magnitude lower. In the recent years, the unique capabilities of the sub-THz and THz gyrotrons have opened the road to many novel and future prospective applications in various physical studies and advanced high-power terahertz technologies. In this paper, we present the current status and functionality of the problem-oriented software packages (most notably GYROSIM and GYREOSS) used for numerical studies, computer-aided design (CAD) and optimization of gyrotrons for diverse applications. They consist of a hierarchy of codes specialized to modelling and simulation of different subsystems of the gyrotrons (EOS, resonant cavity, etc.) and are based on adequate physical models, efficient numerical methods and algorithms.

  11. Wireless charing pillow for a fully implantable hearing aid: Design of a circular array coil based on finite element analysis for reducing magnetic weak zones.

    PubMed

    Lim, Hyung-Gyu; Kim, Jong Hoon; Shin, Dong Ho; Woo, Seong Tak; Seong, Ki Woong; Lee, Jyung Hyun; Kim, Myoung Nam; Wei, Qun; Cho, Jin-Ho

    2015-01-01

    Many types of fully implantable hearing aids have been developed. Most of these devices are implanted behind the ear. To maintain the implanted device for a long period of time, a rechargeable battery and wireless power transmission are used. Because inductive coupling is the most renowned method for wireless power transmission, many types of fully implantable hearing aids are transcutaneously powered using inductively coupled coils. Some patients with an implantable hearing aid require a method for conveniently charging their hearing aid while they are resting or sleeping. To address this need, a wireless charging pillow has been developed that employs a circular array coil as one of its primary parts. In this device, all primary coils are simultaneously driven to maintain an effective charging area regardless of head motion. In this case, however, there may be a magnetic weak zone that cannot be charged at the specific secondary coil's location on the array coil. In this study, assuming that a maximum charging distance is 4 cm, a circular array coil-serving as a primary part of the charging pillow-was designed using finite element analysis. Based on experimental results, the proposed device can charge an implantable hearing aid without a magnetic weak zone within 4 cm of the perpendicular distance between the primary and secondary coils. PMID:26405942

  12. Wireless charing pillow for a fully implantable hearing aid: Design of a circular array coil based on finite element analysis for reducing magnetic weak zones.

    PubMed

    Lim, Hyung-Gyu; Kim, Jong Hoon; Shin, Dong Ho; Woo, Seong Tak; Seong, Ki Woong; Lee, Jyung Hyun; Kim, Myoung Nam; Wei, Qun; Cho, Jin-Ho

    2015-01-01

    Many types of fully implantable hearing aids have been developed. Most of these devices are implanted behind the ear. To maintain the implanted device for a long period of time, a rechargeable battery and wireless power transmission are used. Because inductive coupling is the most renowned method for wireless power transmission, many types of fully implantable hearing aids are transcutaneously powered using inductively coupled coils. Some patients with an implantable hearing aid require a method for conveniently charging their hearing aid while they are resting or sleeping. To address this need, a wireless charging pillow has been developed that employs a circular array coil as one of its primary parts. In this device, all primary coils are simultaneously driven to maintain an effective charging area regardless of head motion. In this case, however, there may be a magnetic weak zone that cannot be charged at the specific secondary coil's location on the array coil. In this study, assuming that a maximum charging distance is 4 cm, a circular array coil-serving as a primary part of the charging pillow-was designed using finite element analysis. Based on experimental results, the proposed device can charge an implantable hearing aid without a magnetic weak zone within 4 cm of the perpendicular distance between the primary and secondary coils.

  13. Marginal Structural Models for Case-Cohort Study Designs to Estimate the Association of Antiretroviral Therapy Initiation With Incident AIDS or Death

    PubMed Central

    Cole, Stephen R.; Hudgens, Michael G.; Tien, Phyllis C.; Anastos, Kathryn; Kingsley, Lawrence; Chmiel, Joan S.; Jacobson, Lisa P.

    2012-01-01

    To estimate the association of antiretroviral therapy initiation with incident acquired immunodeficiency syndrome (AIDS) or death while accounting for time-varying confounding in a cost-efficient manner, the authors combined a case-cohort study design with inverse probability-weighted estimation of a marginal structural Cox proportional hazards model. A total of 950 adults who were positive for human immunodeficiency virus type 1 were followed in 2 US cohort studies between 1995 and 2007. In the full cohort, 211 AIDS cases or deaths occurred during 4,456 person-years. In an illustrative 20% random subcohort of 190 participants, 41 AIDS cases or deaths occurred during 861 person-years. Accounting for measured confounders and determinants of dropout by inverse probability weighting, the full cohort hazard ratio was 0.41 (95% confidence interval: 0.26, 0.65) and the case-cohort hazard ratio was 0.47 (95% confidence interval: 0.26, 0.83). Standard multivariable-adjusted hazard ratios were closer to the null, regardless of study design. The precision lost with the case-cohort design was modest given the cost savings. Results from Monte Carlo simulations demonstrated that the proposed approach yields approximately unbiased estimates of the hazard ratio with appropriate confidence interval coverage. Marginal structural model analysis of case-cohort study designs provides a cost-efficient design coupled with an accurate analytic method for research settings in which there is time-varying confounding. PMID:22302074

  14. Design of a high-sensitivity classifier based on a genetic algorithm: application to computer-aided diagnosis

    NASA Astrophysics Data System (ADS)

    Sahiner, Berkman; Chan, Heang-Ping; Petrick, Nicholas; Helvie, Mark A.; Goodsitt, Mitchell M.

    1998-10-01

    -9155/43/10/014/img3.gif" ALIGN="MIDDLE"/>, although the latter provided a higher total area under the ROC curve. By setting an appropriate decision threshold, the high-sensitivity classifier and correctly identified 61% and 34% of the benign masses respectively without missing any malignant masses. Our results show that the choice of the feature selection technique is important in computer-aided diagnosis, and that the GA may be a useful tool for designing classifiers for lesion characterization.

  15. Evaluation of computer-aided foundation design techniques for fossil fuel power plants. Final report. [Includes list of firms involved, equipment, software, etc

    SciTech Connect

    Kulhawy, F.H.; Dill, J.C.; Trautmann, C.H.

    1984-11-01

    The use of an integrated computer-aided drafting and design system for fossil fuel power plant foundations would offer utilities considerable savings in engineering costs and design time. The technology is available, but research is needed to develop software, a common data base, and data management procedures. An integrated CADD system suitable for designing power plant foundations should include the ability to input, display, and evaluate geologic, geophysical, geotechnical, and survey field data; methods for designing piles, mats, footings, drilled shafts, and other foundation types; and the capability of evaluating various load configurations, soil-structure interactions, and other construction factors that influence design. Although no such integrated system exists, the survey of CADD techniques showed that the technology is available to computerize the whole foundation design process, from single-foundation analysis under single loads to three-dimensional analysis under earthquake loads. The practices of design firms using CADD technology in nonutility applications vary widely. Although all the firms surveyed used computer-aided drafting, only two used computer graphics in routine design procedures, and none had an integrated approach to using CADD for geotechnical engineering. All the firms had developed corporate policies related to system security, supervision, overhead allocation, training, and personnel compensation. A related EPRI project RP2514, is developing guidelines for applying CADD systems to entire generating-plant construction projects. 4 references, 6 figures, 6 tables.

  16. Music and Hearing Aids

    PubMed Central

    Moore, Brian C. J.

    2014-01-01

    The signal processing and fitting methods used for hearing aids have mainly been designed to optimize the intelligibility of speech. Little attention has been paid to the effectiveness of hearing aids for listening to music. Perhaps as a consequence, many hearing-aid users complain that they are not satisfied with their hearing aids when listening to music. This issue inspired the Internet-based survey presented here. The survey was designed to identify the nature and prevalence of problems associated with listening to live and reproduced music with hearing aids. Responses from 523 hearing-aid users to 21 multiple-choice questions are presented and analyzed, and the relationships between responses to questions regarding music and questions concerned with information about the respondents, their hearing aids, and their hearing loss are described. Large proportions of the respondents reported that they found their hearing aids to be helpful for listening to both live and reproduced music, although less so for the former. The survey also identified problems such as distortion, acoustic feedback, insufficient or excessive gain, unbalanced frequency response, and reduced tone quality. The results indicate that the enjoyment of listening to music with hearing aids could be improved by an increase of the input and output dynamic range, extension of the low-frequency response, and improvement of feedback cancellation and automatic gain control systems. PMID:25361601

  17. Music and hearing aids.

    PubMed

    Madsen, Sara M K; Moore, Brian C J

    2014-10-31

    The signal processing and fitting methods used for hearing aids have mainly been designed to optimize the intelligibility of speech. Little attention has been paid to the effectiveness of hearing aids for listening to music. Perhaps as a consequence, many hearing-aid users complain that they are not satisfied with their hearing aids when listening to music. This issue inspired the Internet-based survey presented here. The survey was designed to identify the nature and prevalence of problems associated with listening to live and reproduced music with hearing aids. Responses from 523 hearing-aid users to 21 multiple-choice questions are presented and analyzed, and the relationships between responses to questions regarding music and questions concerned with information about the respondents, their hearing aids, and their hearing loss are described. Large proportions of the respondents reported that they found their hearing aids to be helpful for listening to both live and reproduced music, although less so for the former. The survey also identified problems such as distortion, acoustic feedback, insufficient or excessive gain, unbalanced frequency response, and reduced tone quality. The results indicate that the enjoyment of listening to music with hearing aids could be improved by an increase of the input and output dynamic range, extension of the low-frequency response, and improvement of feedback cancellation and automatic gain control systems.

  18. Music and hearing aids.

    PubMed

    Madsen, Sara M K; Moore, Brian C J

    2014-01-01

    The signal processing and fitting methods used for hearing aids have mainly been designed to optimize the intelligibility of speech. Little attention has been paid to the effectiveness of hearing aids for listening to music. Perhaps as a consequence, many hearing-aid users complain that they are not satisfied with their hearing aids when listening to music. This issue inspired the Internet-based survey presented here. The survey was designed to identify the nature and prevalence of problems associated with listening to live and reproduced music with hearing aids. Responses from 523 hearing-aid users to 21 multiple-choice questions are presented and analyzed, and the relationships between responses to questions regarding music and questions concerned with information about the respondents, their hearing aids, and their hearing loss are described. Large proportions of the respondents reported that they found their hearing aids to be helpful for listening to both live and reproduced music, although less so for the former. The survey also identified problems such as distortion, acoustic feedback, insufficient or excessive gain, unbalanced frequency response, and reduced tone quality. The results indicate that the enjoyment of listening to music with hearing aids could be improved by an increase of the input and output dynamic range, extension of the low-frequency response, and improvement of feedback cancellation and automatic gain control systems. PMID:25361601

  19. The Development of the Bell System First Aid and Personal Safety Course; An Exercise in the Application of Empirical Methods to Instructional Systems Design. Final Report.

    ERIC Educational Resources Information Center

    Markle, David G.

    The project objective was to develop a basic first aid course which would teach at least as much in 7-1/2 hours as a standard ten-hour Red Cross course. Student performance on empirically revised editions of test questions led to the final design of the course. Data gathered from tryouts of 16mm pilot footage were used to write scripts for the…

  20. Three-dimensional laser scanning and reconstruction of ear canal impressions for optimal design of hearing aid shells

    NASA Astrophysics Data System (ADS)

    Tognola, Gabriella; Parazzini, Marta; Svelto, Cesare; Ravazzani, Paolo; Grandori, Ferdinando

    2003-05-01

    The hearing aid shell (or earmold) couples the hearing aid with the user ear. Proper fitting of the earmold to the subject ear canal is required to achieve satisfactory wearing comfort, reduction in acoustic feedback, and unwanted changes in the electroacoustic characteristics of the aid. To date, the hearing aid shell manufacturing process is fully manual: the shell is fabricated as a replica of the impression of the subject ear canal. The typical post-impression processes made on the ear impression modify the physical dimensions and the shape of the final shell thus affecting the overall performance of the hearing aid. In the proposed approach, the surface of the original ear impression is 3D laser scanned by a prototype equipment consisting of a pair of CCD cameras and a commercial He-Ne laser. The digitized surface is reconstructed by means of iterative deformations of a geometrical model of simple and regular shape. The triangular mesh thus obtained is smoothed by a non-shrinking low-pass spatial filter. With this approach, post-impression processes are no more needed because the digitally reconstructed impression can be directly fed to rapid prototyping equipments, thus achieving a better accuracy in obtaining an exact replica of the ear impression. Furthermore, digital reconstruction of the impression allows for simple and reliable storage and transmission of the model without handling a physical object.

  1. AIDS (image)

    MedlinePlus

    AIDS (acquired immune deficiency syndrome) is caused by HIV (human immunodeficiency virus), and is a syndrome that ... life-threatening illnesses. There is no cure for AIDS, but treatment with antiviral medicine can suppress symptoms. ...

  2. Hearing Aids

    MedlinePlus

    ... more in both quiet and noisy situations. Hearing aids help people who have hearing loss from damage ... your doctor. There are different kinds of hearing aids. They differ by size, their placement on or ...

  3. Individualized Surgical Templates and Titanium Microplates for Le Fort I Osteotomy by Computer-Aided Design and Computer-Aided Manufacturing.

    PubMed

    He, Wei; Tian, Kaiyue; Xie, Xiaoyan; Wang, Xiaoxia; Li, Yang; Wang, Xing; Li, Zili

    2015-09-01

    The authors report the use of novel individualized surgical templates and titanium miniplates for Le Fort I osteotomy and evaluate the accuracy of this technique in vitro. Nine three-dimensional stereolithographic skull models were used to design the templates and titanium microplates and to simulate the operation. Cone beam computed tomography (CBCT) scans of the skulls were acquired preoperatively and were used to generate virtual models. The surgical plans were made based on three-dimensional cephalometric analyses, and osteotomies were then performed virtually. Cylinder-shaped markers were placed to permit the correct location of titanium screws, and individualized surgical templates were designed. The bony segments were then repositioned virtually according to the surgical plans to correct the skeletal deformities. Resin surgical templates were produced by stereolithography rapid prototyping and the titanium miniplates by three-dimensional cutting. Le Fort I osteotomy was performed under the guide of the surgical templates and fixed with the titanium miniplates. Postoperatively, CBCT scans of each skull model were taken, and the differences between the actual and planned surgical outcomes were measured by superimposing the planned and postoperative virtual models generated from CBCT images. The authors demonstrated that the average linear difference between the planned and actual outcomes was <1 mm and the average orientation difference was <1°. The individualized surgical templates and titanium microplates designed in this experimental study permitted the repositioning of the maxillary segment to the correct planned positions during Le Fort I osteotomy, making this technique a promising alternative to the conventional split method.

  4. Hearing Aids

    MedlinePlus

    ... type and degree of loss. Are there different styles of hearing aids? Styles of hearing aids Source: NIH/NIDCD Behind-the- ... the ear canal and are available in two styles. The in-the-canal (ITC) hearing aid is ...

  5. Manual for Student Financial Aids.

    ERIC Educational Resources Information Center

    MacDonald, Douglas S.

    This manual was designed to provide structural guidelines for financial aid program operations and administration at the Community College of Baltimore. Topics discussed include: the philosophy of student aid at an open door college; the objectives of the student financial aid office; staff development and administrative improvement; organization,…

  6. U.S. aerospace industry opinion of the effect of computer-aided prediction-design technology on future wind-tunnel test requirements for aircraft development programs

    NASA Technical Reports Server (NTRS)

    Treon, S. L.

    1979-01-01

    A survey of the U.S. aerospace industry in late 1977 suggests that there will be an increasing use of computer-aided prediction-design technology (CPD Tech) in the aircraft development process but that, overall, only a modest reduction in wind-tunnel test requirements from the current level is expected in the period through 1995. Opinions were received from key spokesmen in 23 of the 26 solicited major companies or corporate divisions involved in the design and manufacture of nonrotary wing aircraft. Development programs for nine types of aircraft related to test phases and wind-tunnel size and speed range were considered.

  7. Early & Often: Designing a Comprehensive System of Financial Aid Information. A Report of the Advisory Committee on Student Financial Assistance

    ERIC Educational Resources Information Center

    Advisory Committee on Student Financial Assistance, 2008

    2008-01-01

    Students and parents need ample time and accurate information to prepare for the financial burden of a college education--those who lack this knowledge base face a significant access barrier to higher education. This problem can be countered by the delivery of comprehensive, integrated financial aid information, an approach identified by the…

  8. Design and Evaluation of a Protocol to Assess Electronic Travel Aids for Persons Who Are Visually Impaired

    ERIC Educational Resources Information Center

    Havik, Else M.; Steyvers, Frank J. J. M.; van der Velde, Hanneke; Pinkster, J. Christiaan; Kooijman, Aart C.

    2010-01-01

    This study evaluated a protocol that was developed to assess how beneficial electronic travel aids are for persons who are visually impaired. Twenty persons with visual impairments used an electronic travel device (Trekker) for six weeks to conform to the protocol, which proved useful in identifying successful users of the device. (Contains 2…

  9. Computer-Assisted Mandibular Reconstruction using a Patient-Specific Reconstruction Plate Fabricated with Computer-Aided Design and Manufacturing Techniques

    PubMed Central

    Wilde, Frank; Cornelius, Carl-Peter; Schramm, Alexander

    2014-01-01

    We investigated the workflow of computer-assisted mandibular reconstruction that was performed with a patient-specific mandibular reconstruction plate fabricated with computer-aided design and computer-aided manufacturing (CAD/CAM) techniques and a fibula flap. We assessed the feasibility of this technique from virtual planning to the completion of surgery. Computed tomography (CT) scans of a cadaveric skull and fibula were obtained for the virtual simulation of mandibular resection and reconstruction using ProPlan CMF software (Materialise®/DePuy Synthes®). The virtual model of the reconstructed mandible provided the basis for the computer-aided design of a patient-specific reconstruction plate that was milled from titanium using a five-axis milling machine and CAM techniques. CAD/CAM techniques were used for producing resection guides for mandibular resection and cutting guides for harvesting a fibula flap. Mandibular reconstruction was simulated in a cadaveric wet laboratory. No problems were encountered during the procedure. The plate was fixed accurately to the residual bone without difficulty. The fibula segments were attached to the plate rapidly and reliably. The fusion of preoperative and postoperative CT datasets demonstrated high reconstruction precision. Computer-assisted mandibular reconstruction with CAD/CAM-fabricated patient-specific reconstruction plates appears to be a promising approach for mandibular reconstruction. Clinical trials are required to determine whether these promising results can be translated into successful practice and what further developments are needed. PMID:25045420

  10. Professional attitude of health care workers toward serving HIV/AIDS patients and drug users: questionnaire design and evaluation of reliability and validity.

    PubMed

    See, Lai-Chu; Shen, Yu-Ming; Chen, Chia-Ling; Huang, Tsuei-Mi; Huang, Yi-Hua; Huang, Hui-Chun; Lin, Sheue-Rong

    2011-11-01

    The manner in which health care workers (HCWs) interact with HIV/AIDS patients and drug users during their work clearly influences the sustainability of harm reduction programs. To evaluate the professional attitudes of HCWs, we designed a questionnaire with four constructs - discrimination, acceptance of HIV/AIDS patients, acceptance of drug users, and fear - and tested its reliability and validity. Ten experts rated the questionnaire and the mean content validity index was 85.6%. Analysis of 251 anonymous questionnaires from HCWs in Taiwan yielded a composite reliability and Cronbach's α for the four constructs of >0.7. First-order and second-order confirmatory factor analysis revealed a χ(2)/degrees of freedom <3, goodness-of-fit index (GFI) >0.9, adjusted goodness-of-fit index (AGFI) >0.9, Bentler-Bonnett normal fix index >0.9, and a root mean square error of approximation between 0.00 and 0.07 indicating a good fit of the model. HCWs with training in HRPs or AIDS prevention had higher questionnaire scores than those without such training, indicating good known-group validity.

  11. Financial Aid.

    ERIC Educational Resources Information Center

    Graves, Mary A.

    This workbook assists college and vocational school bound American Indian students in determining their financial needs and in locating sources of financial aid. A checklist helps students assess the state of their knowledge of financial programs; a glossary defines terms pertinent to the realm of financial aid (i.e., graduate study programs,…

  12. Teaching AIDS.

    ERIC Educational Resources Information Center

    Tonks, Douglas

    This book presents a curriculum to educate students about the risk of AIDS and HIV infection. The opening chapters of the book presents a discussion of: how teachers can create an environment of support for an AIDS education program; the political and educational implications of winning principal, district, and parental support for an AIDS…

  13. Managing AIDS in the workplace.

    PubMed

    Esposito, M D; Myers, J E

    1993-01-01

    Because of the AIDS epidemic and the protections afforded individuals with AIDS under the Americans with Disabilities Act (ADA), employers are well advised to ensure compliance under applicable law to reduce exposure to employee claims of discrimination and to efficiently manage workplace issues associated with AIDS. Employers should implement AIDS policies and programs designed to educate their workforce to reduce the spread of AIDS and to clear up any misunderstandings about the disease which could wreak havoc in the workplace. This article summarizes suggested action steps for employers and outside resources to consult for guidance.

  14. Computer-aided vaccine designing approach against fish pathogens Edwardsiella tarda and Flavobacterium columnare using bioinformatics softwares

    PubMed Central

    Mahendran, Radha; Jeyabaskar, Suganya; Sitharaman, Gayathri; Michael, Rajamani Dinakaran; Paul, Agnal Vincent

    2016-01-01

    Edwardsiella tarda and Flavobacterium columnare are two important intracellular pathogenic bacteria that cause the infectious diseases edwardsiellosis and columnaris in wild and cultured fish. Prediction of major histocompatibility complex (MHC) binding is an important issue in T-cell epitope prediction. In a healthy immune system, the T-cells must recognize epitopes and induce the immune response. In this study, T-cell epitopes were predicted by using in silico immunoinformatics approach with the help of bioinformatics tools that are less expensive and are not time consuming. Such identification of binding interaction between peptides and MHC alleles aids in the discovery of new peptide vaccines. We have reported the potential peptides chosen from the outer membrane proteins (OMPs) of E. tarda and F. columnare, which interact well with MHC class I alleles. OMPs from E. tarda and F. columnare were selected and analyzed based on their antigenic and immunogenic properties. The OMPs of the genes TolC and FCOL_04620, respectively, from E. tarda and F. columnare were taken for study. Finally, two epitopes from the OMP of E. tarda exhibited excellent protein–peptide interaction when docked with MHC class I alleles. Five epitopes from the OMP of F. columnare had good protein–peptide interaction when docked with MHC class I alleles. Further in vitro studies can aid in the development of potential peptide vaccines using the predicted peptides. PMID:27284239

  15. Computer-aided vaccine designing approach against fish pathogens Edwardsiella tarda and Flavobacterium columnare using bioinformatics softwares.

    PubMed

    Mahendran, Radha; Jeyabaskar, Suganya; Sitharaman, Gayathri; Michael, Rajamani Dinakaran; Paul, Agnal Vincent

    2016-01-01

    Edwardsiella tarda and Flavobacterium columnare are two important intracellular pathogenic bacteria that cause the infectious diseases edwardsiellosis and columnaris in wild and cultured fish. Prediction of major histocompatibility complex (MHC) binding is an important issue in T-cell epitope prediction. In a healthy immune system, the T-cells must recognize epitopes and induce the immune response. In this study, T-cell epitopes were predicted by using in silico immunoinformatics approach with the help of bioinformatics tools that are less expensive and are not time consuming. Such identification of binding interaction between peptides and MHC alleles aids in the discovery of new peptide vaccines. We have reported the potential peptides chosen from the outer membrane proteins (OMPs) of E. tarda and F. columnare, which interact well with MHC class I alleles. OMPs from E. tarda and F. columnare were selected and analyzed based on their antigenic and immunogenic properties. The OMPs of the genes TolC and FCOL_04620, respectively, from E. tarda and F. columnare were taken for study. Finally, two epitopes from the OMP of E. tarda exhibited excellent protein-peptide interaction when docked with MHC class I alleles. Five epitopes from the OMP of F. columnare had good protein-peptide interaction when docked with MHC class I alleles. Further in vitro studies can aid in the development of potential peptide vaccines using the predicted peptides. PMID:27284239

  16. Hearing Aids and Music

    PubMed Central

    Chasin, Marshall; Russo, Frank A.

    2004-01-01

    Historically, the primary concern for hearing aid design and fitting is optimization for speech inputs. However, increasingly other types of inputs are being investigated and this is certainly the case for music. Whether the hearing aid wearer is a musician or merely someone who likes to listen to music, the electronic and electro-acoustic parameters described can be optimized for music as well as for speech. That is, a hearing aid optimally set for music can be optimally set for speech, even though the converse is not necessarily true. Similarities and differences between speech and music as inputs to a hearing aid are described. Many of these lead to the specification of a set of optimal electro-acoustic characteristics. Parameters such as the peak input-limiting level, compression issues—both compression ratio and knee-points—and number of channels all can deleteriously affect music perception through hearing aids. In other cases, it is not clear how to set other parameters such as noise reduction and feedback control mechanisms. Regardless of the existence of a “music program,” unless the various electro-acoustic parameters are available in a hearing aid, music fidelity will almost always be less than optimal. There are many unanswered questions and hypotheses in this area. Future research by engineers, researchers, clinicians, and musicians will aid in the clarification of these questions and their ultimate solutions. PMID:15497032

  17. Using Novel 2D Image Manipulation Methods to Aid Initial Concept Generation with Postgraduate Industrial Design Students

    ERIC Educational Resources Information Center

    Hurn, Karl; Storer, Ian

    2015-01-01

    The aim of this paper is to provide educators and industrial design professionals with an insight into the development of innovative design ideation images manipulation techniques and, highlight how these techniques could be used to not only improve student ideation skills, but also as design enablers for a broader range of professionals working…

  18. Computer-aided design and manufacturing and rapid prototyped nanoscale hydroxyapatite/polyamide (n-HA/PA) construction for condylar defect caused by mandibular angle ostectomy.

    PubMed

    Li, Jihua; Hsu, Yuchun; Luo, En; Khadka, Ashish; Hu, Jing

    2011-08-01

    The fracture or defect of the mandibular condyle is one of the serious complications during angle-reduction ostectomy. Reconstruction of such defects also is a daunting task. The case report describes a method based on computer-aided design/computer-aided manufacturing (CAD/CAM) and rapid prototyping nanoscale hydroxyapatite/polyamide (n-HA/PA) for individual design, fabrication, and implantation of a mandibular condyle. A 27-year-old woman with a square-shaped face who had previously undergone mandibular angle reduction reported with malocclusion, deviated mouth, collapse of the right side of the face, and masticatory problems. The reason for the problems was the unintended removal of the condyle during the ostectomy procedure. Using computed tomography (CT) data, a biomimetic n-HA/PA scaffold, and CAD/CAM for rapid prototyping by three-dimensional (3D) printing, a perfect-fitting condylar implant was fabricated. A surgical guide system also was developed to reproduce the procedures accurately so a perfect fit could be obtained during surgery. The patient ultimately regained reasonable jaw contour and appearance, as well as appreciable temporomandibular joint (TMJ) function.

  19. Enhanced Thermostability of Lipoxygenase from Anabaena sp. PCC 7120 by Site-Directed Mutagenesis Based on Computer-Aided Rational Design.

    PubMed

    Diao, Hanwen; Zhang, Chong; Wang, Shuicheng; Lu, Fengxia; Lu, Zhaoxin

    2016-04-01

    Lipoxygenase from Anabaena sp. PCC 7120 (Ana-LOX) was thermally unstable. So, improving the thermostability of the enzyme was quite essential. The target site of Ana-LOX selected for site-directed mutagenesis was based on computer-aided rational design. The thermostability and specific activity of Ana-LOX were improved with replacing valine with alanine at the target site 421 and the site 40. Compared to the wild-type enzyme which has a half-life (T 1/2) of inactivation of 3.8 min at 50 °C, the T 1/2 of mutant enzymes with V421A and V40A substitution increased to 4.4 and 7.0 min, respectively. The double mutant V421A/V40A showed a synergistic effect with a T 1/2 value of 8.3 min, resulting in a 1.18-fold improvement compared to the original Ana-LOX. V421A, V40A, and V421A/V40A also obtained 4.83, 41.58, and 80.07 % increase in specific activity, respectively. This study provides useful theoretical reference for enzyme molecular modification and computer-aided rational design.

  20. Hearing Aid Tester

    NASA Technical Reports Server (NTRS)

    1978-01-01

    Hearing aids often develop malfunctions that are not detected by the wearer. This is particularly true when the wearers are school-age children. Studies of selected groups showed that from 30 to more than 50 percent of school children were not getting adequate benefit from their hearing aids because of unrecognized malfunctions, usually low or dead batteries. This can be serious because hearing impairment retards a child's educational progress. NASA technology incorporated in the Hearing Aid Malfunction Detection Unit (HAMDU), the device pictured, is expected to provide an effective countermeasure to the childrens' hearing aid problem. A patent license has been awarded to a minority-owned firm, Hopkins International Company, a subsidiary of H. H. Aerospace Design Co., Inc., Elmford, New York. The company plans early commercial availability of its version of the device.

  1. Hearing Aid

    MedlinePlus

    ... and Food and Drug Administration Staff FDA permits marketing of new laser-based hearing aid with potential ... feeds Follow FDA on Twitter Follow FDA on Facebook View FDA videos on YouTube View FDA photos ...

  2. Computer-aided resection and endoprosthesis design for the management of malignant bone tumors around the knee: outcomes of 12 cases

    PubMed Central

    2013-01-01

    Background To report the outcomes of computer-aided resection and endoprosthesis design for the management of malignant bone tumors around the knee. Methods Computed tomography (CT) and magnetic resonance imaging (MRI) data were input into computer software to produce three-dimensional (3D) models of the tumor extent. Imaging data was then used to create a template for surgical resection, and development of an individualized combined allogeneic bone/endoprosthesis. Surgical simulations were performed prior to the actual surgery. Results This study included 9 males and 3 females with a mean age of 25.3 years (range, 13 to 40 years). There were 9 tumors in the distal femur and 3 in the proximal tibia. There were no surgical complications. In all cases pathologically confirmed clear surgical margins were obtained. Postoperative radiographs showed the range of tumor resection was in accordance with the preoperative design, and the morphological reconstruction of the bone defect was satisfactory with complete bilateral symmetry. The mean follow-up time was 26.5 months. Two patients died of their disease and the remaining are alive and well without evidence of recurrence. All patients are able to ambulate freely without restrictions. At the last follow-up, the average International Society of Limb Salvage score was 25.8 (range, 18 to 27), and was excellent in 8 cases and good in 4 cases. Conclusions Computer-aided design and modeling for the surgical management of bone tumors and subsequent limb reconstruction provides accurate tumor removal with the salvage of a maximal amount of unaffected bone and precise endoprosthesis reconstruction. PMID:24267157

  3. Novel Ergonomic Postural Assessment Method (NERPA) Using Product-Process Computer Aided Engineering for Ergonomic Workplace Design

    PubMed Central

    Sanchez-Lite, Alberto; Garcia, Manuel; Domingo, Rosario; Angel Sebastian, Miguel

    2013-01-01

    Background Musculoskeletal disorders (MSDs) that result from poor ergonomic design are one of the occupational disorders of greatest concern in the industrial sector. A key advantage in the primary design phase is to focus on a method of assessment that detects and evaluates the potential risks experienced by the operative when faced with these types of physical injuries. The method of assessment will improve the process design identifying potential ergonomic improvements from various design alternatives or activities undertaken as part of the cycle of continuous improvement throughout the differing phases of the product life cycle. Methodology/Principal Findings This paper presents a novel postural assessment method (NERPA) fit for product-process design, which was developed with the help of a digital human model together with a 3D CAD tool, which is widely used in the aeronautic and automotive industries. The power of 3D visualization and the possibility of studying the actual assembly sequence in a virtual environment can allow the functional performance of the parts to be addressed. Such tools can also provide us with an ergonomic workstation design, together with a competitive advantage in the assembly process. Conclusions The method developed was used in the design of six production lines, studying 240 manual assembly operations and improving 21 of them. This study demonstrated the proposed method’s usefulness and found statistically significant differences in the evaluations of the proposed method and the widely used Rapid Upper Limb Assessment (RULA) method. PMID:23977340

  4. Present capabilities and future requirements for computer-aided geometric modeling in the design and manufacture of gas turbine

    NASA Technical Reports Server (NTRS)

    Caille, E.; Propen, M.; Hoffman, A.

    1984-01-01

    Gas turbine engine design requires the ability to rapidly develop complex structures which are subject to severe thermal and mechanical operating loads. As in all facets of the aerospace industry, engine designs are constantly driving towards increased performance, higher temperatures, higher speeds, and lower weight. The ability to address such requirements in a relatively short time frame has resulted in a major thrust towards integrated design/analysis/manufacturing systems. These computer driven graphics systems represent a unique challenge, with major payback opportunities if properly conceived, implemented, and applied.

  5. Recapture training aid.

    SciTech Connect

    Pacheco, James Edward

    2004-08-01

    The breacher's training aid described in this report was designed to simulate features of magazine and steel-plate doors. The training aid enables breachers to practice using their breaching tools on components that they may encounter when attempting to enter a facility. Two types of fixtures were designed and built: (1) a large fixture incorporates simulated hinges, hasps, lock shrouds, and pins, and (2) a small fixture simulates the cross section of magazine and steel-plate doors. The small fixture consists of steel plates on either side of a structural member, such as an I-beam. The report contains detailed descriptions and photographs of the training aids, assembly instructions, and drawings.

  6. AIDS lymphomas.

    PubMed

    Middleton, G W; Lau, R K

    1992-01-01

    Chronically immunosuppressed individuals are susceptible to lymphoreticular tumors. Up to 15% of patients with congenital deficiencies such as ataxia=telangiectasia may develop malignancies, mainly high-grade B cell non=Hodgkin's lymphomas (NHLs). AIDS lymphomas are comprised of NHLs including Burkitt's lymphoma (BL) and primary cerebral lymphomas (PCLs). Almost 3% of all AIDS patients (2824 of 97,258 cases) developed NHL. Epstein-Barr virus (EBV) as a co-factor in AIDS lymphomagenesis has been studied: in 12 cases of 24 AIDS lymphomas EBV by DNA in situ hybridization was found. In an analysis of 6 primary cerebral lymphomas, .5 were positive for EBV DNA by Southern blotting. In Burkitt's lymphoma the characteristic genetic alteration affects the c-myc oncogene. In 1/3 of BL p53 mutations were found but none in the 43 NHLs suggesting that p53 mutations and c-myc activation act synergistically in the pathogenesis of these tumors. Cytotoxic agents dideoxyinosine, dideoxycytosine, and zidovudine may cause secondary neoplasia. 8 of 55 AIDS patients under zidovudine treatment developed high-grade lymphoma 23.8 months subsequently; recently doses were reduced. PCL was found in 21 of 90 patients. A 5.2 months survival was associated with combined treatment with cyclophosphamide, Oncovin (vincristine), methotrexate, etoposide, and cytosine arabinoside compared with 11.3 months with chemotherapy. Colony-stimulating factors (CSFs) alleviate drug-induced myelotoxicity and zidovudine-induced neutropenia, however, l8 of 11 patients receiving granulocyte-macrophage CSF developed hematological toxicity. Interleukine-2 produced by T-helper cells enhancing tumor cells cytotoxicity has been used in AIDS-associated cryptosporidial diarrhea and in 4 patients with AIDS lymphoma with modest response, but its stimulation of the HIV-infected substrate may increase viral proliferation.

  7. Medical emergency aid through telematics: design, implementation guidelines and analysis of user requirements for the MERMAID project.

    PubMed

    Anogianakis, G; Maglavera, S; Pomportsis, A; Bountzioukas, S; Beltrame, F; Orsi, G

    1997-01-01

    MERMAID is an EU financed telemedicine project with global reach and 24-hour, multilingual capability. It aspires to provide a model for the provision of health care services based on the electronic transmission of medical information, via ISDN based videoconferencing. This model will not be limited to medical diagnostics but it will encompass all cases where the actual delivery of health care services involves a patient who is not located where the provider is. Its implementation requires the commissioning of an expensive telecommunications infrastructure and the exploration of a number of solutions. In fact, all categories of telemedical applications (audio and video conferencing, multimedia communications, flat file and image transfer with low, medium and high bandwidth data requirements) will be considered while the full range of network choices (Digital land lines, Cellular/Wireless, Satellite and Broadband) will be tested in terms of cost/performance tradeoffs that are inherent to them and the developmental stage each of these options occupies in their in its life cycle. Finally, out that MERMAID utilises advanced land based line transmission technologies to aid the remote patient by making available the specialist care that is best suited in the particular case.

  8. Medical emergency aid through telematics: design, implementation guidelines and analysis of user requirements for the MERMAID project.

    PubMed

    Anogianakis, G; Maglavera, S; Pomportsis, A; Bountzioukas, S; Beltrame, F; Orsi, G

    1998-01-01

    MERMAID is an EU financed telemedicine project with global reach and 24-h, multilingual capability. It aspires to provide a model for the provision of health care services based on the electronic transmission of medical information, via ISDN based videoconferencing. This model will not be limited to medical diagnostics but it will encompass all cases where the actual delivery of health care services involves a patient who is not located where the provider is. Its implementation requires the commissioning of an expensive telecommunications infrastructure and the exploration of a number of solutions. In fact, all categories of telemedical applications (audio and video conferencing, multimedia communications, flat file and image transfer with low, medium and high bandwidth data requirements) are considered while the full range of network choices (digital land lines, cellular/wireless, satellite and broadband) are being tested in terms of cost/performance tradeoffs that are inherent to them and the developmental stage each of these options occupies in their in its life cycle. Finally, out that MERMAID utilises advanced land based line transmission technologies to aid the remote patient by making available the specialist care that is best suited in the particular case.

  9. The design and analysis of simple low speed flap systems with the aid of linearized theory computer programs

    NASA Technical Reports Server (NTRS)

    Carlson, Harry W.

    1985-01-01

    The purpose here is to show how two linearized theory computer programs in combination may be used for the design of low speed wing flap systems capable of high levels of aerodynamic efficiency. A fundamental premise of the study is that high levels of aerodynamic performance for flap systems can be achieved only if the flow about the wing remains predominantly attached. Based on this premise, a wing design program is used to provide idealized attached flow camber surfaces from which candidate flap systems may be derived, and, in a following step, a wing evaluation program is used to provide estimates of the aerodynamic performance of the candidate systems. Design strategies and techniques that may be employed are illustrated through a series of examples. Applicability of the numerical methods to the analysis of a representative flap system (although not a system designed by the process described here) is demonstrated in a comparison with experimental data.

  10. Computer-Aided Treatment Design of a Distal Upper Extremity Soft Tissue Tumor with Electron Beam Radiotherapy.

    PubMed

    Li, Chun; Crawford, Susan; Mundt, A J; Vijayakumar, S

    2015-01-01

    We present here a novel approach for the planning and treatment of a distal upper extremity soft tissue tumor. Utilizing computed tomography (CT) based electron dose calculations, a customized compensating wax bolus was designed in order to deliver sufficient dose coverage to the tumor volume while sparing the draining lymphatics of the patient's hand and digits. A clinical case is presented as well as the design and construction of the compensator. Outcome and clinical implications are discussed.

  11. Applicability of the Remote Mobile Emplacement Package (RMEP) design as a mobility aid for proposed post-84 Mars missions, phase O

    NASA Technical Reports Server (NTRS)

    1978-01-01

    The results of study to determine the applicability of the Remote Mobile Emplacement Package (RMEP) design concept as a mobility aid for the proposed post-'84 Mars missions are presented. The RMEP wheel and mobility subsystem parameters: wheel tire size, weight, stowed volume, and environmental effects; obstacle negotiation; reliability and wear; motor and drive train; and electrical power demand were reviewed. Results indicated that: (1) the basic RMEP wheel design would be satisfactory, with additional attention to heating, side loading, tread wear and ultraviolet radiation protection; (2) motor and drive train power requirements on Mars would be less than on Earth; and (3) the mobility electrical power requirements would be small enough to offer the option of operating the Mars mini rover untethered. Payload power required for certain sampling functions would preclude the use of battery power for these missions. Hazard avoidance and reverse direction maneuvers are discussed. Limited examination of vehicle payload integration and thermal design was made, pending establishment of a baseline vehicle/payload design.

  12. Confronting AIDS.

    PubMed

    Squire, L

    1998-03-01

    By 2020, HIV/AIDS will be the leading infectious killer of young and middle-aged adults in the developing world. Past gains in life expectancy are already being eroded in some countries. Millions of lives can, however, be saved if developing country governments, the international community, and nongovernmental organizations act now. Although more than 11 million people have already died of AIDS, 2.3 billion people live in developing countries in which the disease has not yet spread beyond certain risk groups. If the spread of HIV is checked, the quality of care available to people who are infected with HIV will probably be better than it would be in the context of a full-blown AIDS epidemic. However, while governments need to respond urgently to HIV/AIDS, using resources to help people with AIDS will reduce the resources available for other investments, such as child education, providing safe drinking water, and building roads. Economics can help governments set priorities as they decide how best to allocate their available resources. Externalities, public goods, and redistribution are discussed. All countries will need to use some combination of preventive and coping measures. PMID:12293445

  13. Efficacy of Resistance Training as an Aid to Smoking Cessation: Rationale and Design of the Strength To Quit Study

    PubMed Central

    Ciccolo, Joseph T.; Williams, David M.; Dunsiger, Shira I.; Whitworth, James W.; McCullough, Aston K.; Bock, Beth B.; Marcus, Bess H.; Myerson, Merle

    2014-01-01

    Despite recent declines in the rates of cigarette smoking, smoking remains prevalent among individuals with lower income, less education, and those with mental illness or HIV. Exercise is promoted as an aid to smoking cessation; however, the evidence for this recommendation is equivocal. To date, the majority of studies have only examined aerobic exercise; there is a poor understanding of the mechanisms of action; and there is an under-representation of male smokers. The goal of this trial is to produce new data that will help to address each of these gaps. A total of 206 male and female smokers will receive a brief smoking cessation education session prior to being randomized into a 12-week Resistance Training (RT) or Wellness Contact Control group. Both groups will have the option of using nicotine replacement therapy (NRT), and both will meet on-site twice per week during the 12-week program (24 total sessions). Follow-up assessments will occur at the end of the 12-weeks (3-month), and at a 6-month and 12-month (post-randomization) visit. Participants will not receive any additional smoking cessation treatment during follow-up; however, the RT group will receive a 9-month membership to a fitness center to encourage continued resistance training as a way to maintain cessation, and attendance will be tracked. The primary outcome is salivary-cotinine-verified 7-Day Point Prevalence Abstinence (PPA) at the 3-month assessment, and at the 6 and 12-month follow-ups. Secondary outcomes include effects of resistance training on nicotine withdrawal symptoms, indicators of mental health, and markers of disease risk. PMID:25157265

  14. The polar phase response property of monopolar ECG voltages using a Computer-Aided Design and Drafting (CAD)-based data acquisition system.

    PubMed

    Goswami, B; Mitra, M; Nag, B; Mitra, T K

    1993-11-01

    The present paper discusses a Computer-Aided Design and Drafting (CAD) based data acquisition and polar phase response study of the ECG. The scalar ECG does not show vector properties although such properties are embedded in it. In the present paper the polar phase response property of monopolar chest lead (V1 to V6) ECG voltages has been studied. A software tool has been used to evaluate the relative phase response of ECG voltages. The data acquisition of monopolar ECG records of chest leads V1 to V6 from the chart recorder has been done with the help of the AutoCAD application package. The spin harmonic constituents of ECG voltages are evaluated at each harmonic plane and the polar phase responses are studied at each plane. Some interesting results have been observed in some typical cases which are discussed in the paper. PMID:8307653

  15. First Aid Challenge

    ERIC Educational Resources Information Center

    Roman, Harry T.

    2011-01-01

    This article describes a challenge wherein students will be asked to design a portable first aid kit that is normally carried in a recreational vehicle (RV), but can also be hand-carried or backpacked off road for distances of approximately 1-2 miles. This can be a very practical challenge for the students because it touches everyone. Everybody…

  16. Computer Aided Art Major.

    ERIC Educational Resources Information Center

    Gibson, Jim

    The Computer Aided Art program offered at Northern State State University (Aberdeen, South Dakota), is coordinated with the traditional art major. The program is designed to familiarize students with a wide range of art-related computer hardware and software and their applications and to prepare students for problem-solving with unfamiliar…

  17. Instructional Aide Program.

    ERIC Educational Resources Information Center

    Thomson, Henry

    The Instructional Aide Program (Shoreline Community College, Seattle, Washington) is a flexible curriculum designed to prepare students to meet the paraprofessional manpower needs of several kinds of institution. It was prepared after consultation with representatives of the schools, the YMCA, and the country park system. Other agencies still to…

  18. Updates on the Construction of an Eyeglass-Supported Nasal Prosthesis Using Computer-Aided Design and Rapid Prototyping Technology.

    PubMed

    Ciocca, Leonardo; Tarsitano, Achille; Marchetti, Claudio; Scotti, Roberto

    2016-01-01

    This study was undertaken to design an updated connection system for an eyeglass-supported nasal prosthesis using rapid prototyping techniques. The substructure was developed with two main endpoints in mind: the connection to the silicone and the connection to the eyeglasses. The mold design was also updated; the mold was composed of various parts, each carefully designed to allow for easy release after silicone processing and to facilitate extraction of the prosthesis without any strain. The approach used in this study enabled perfect transfer of the reciprocal position of the prosthesis with respect to the eyeglasses, from the virtual to the clinical environment. Moreover, the reduction in thickness improved the flexibility of the prosthesis and promoted adaptation to the contours of the skin, even during functional movements. The method described here is a simplified and viable alternative to standard construction techniques for nasal prostheses and offers improved esthetic and functional results when no bone is available for implant-supported prostheses.

  19. Exploratory research for the development of a computer aided software design environment with the software technology program

    NASA Technical Reports Server (NTRS)

    Hardwick, Charles

    1991-01-01

    Field studies were conducted by MCC to determine areas of research of mutual interest to MCC and JSC. NASA personnel from the Information Systems Directorate and research faculty from UHCL/RICIS visited MCC in Austin, Texas to examine tools and applications under development in the MCC Software Technology Program. MCC personnel presented workshops in hypermedia, design knowledge capture, and design recovery on site at JSC for ISD personnel. The following programs were installed on workstations in the Software Technology Lab, NASA/JSC: (1) GERM (Graphic Entity Relations Modeler); (2) gIBIS (Graphic Issues Based Information System); and (3) DESIRE (Design Recovery tool). These applications were made available to NASA for inspection and evaluation. Programs developed in the MCC Software Technology Program run on the SUN workstation. The programs do not require special configuration, but they will require larger than usual amounts of disk space and RAM to operate properly.

  20. Solving rational matrix equations in the state space with applications to computer-aided control-system design

    NASA Technical Reports Server (NTRS)

    Packard, A. K.; Sastry, S. S.

    1986-01-01

    A method of solving a class of linear matrix equations over various rings is proposed, using results from linear geometric control theory. An algorithm, successfully implemented, is presented, along with non-trivial numerical examples. Applications of the method to the algebraic control system design methodology are discussed.

  1. Effect of a Laboratory Manual Design Incorporating Visual Information-Processing Aids on Student Learning and Attitudes.

    ERIC Educational Resources Information Center

    Dechsri, Precham; Heikkinen, Henry W.; Jones, Loretta L.

    1997-01-01

    Reports on a study that assesses the effects of the application of visual information-processing theory to the design of a laboratory manual for chemistry. Focuses on the effects on content learning, practical skill mastery, and attitudes of university students enrolled in a general chemistry course. Contains 41 references. (DDR)

  2. "It's a Sort of Echo...": Sensory Perception of the Environment as an Aid to Tactile Map Design

    ERIC Educational Resources Information Center

    Gardiner, Ann; Perkins, Chris

    2005-01-01

    The results of an empirical investigation into how visually-impaired people sense their surroundings show that a range of environmental features can be identified using sound, touch and smell. The information gained is relevant to the design of tactile maps, to ensure that an area is represented in a way that is meaningful to the map users.…

  3. Structure tracking aided design and synthesis of Li3V2(PO4)3 nanocrystals as high-power cathodes for lithium ion batteries

    DOE PAGES

    Wang, Liping; Bai, Jianming; Gao, Peng; Wang, Xiaoya; Looney, J. Patrick; Wang, Feng

    2015-07-30

    In this study, preparing new electrode materials with synthetic control of phases and electrochemical properties is desirable for battery applications but hardly achievable without knowing how the synthesis reaction proceeds. Herein, we report on structure tracking-aided design and synthesis of single-crystalline Li3V2(PO4)3 (LVP) nanoparticles with extremely high rate capability. A comprehensive investigation was made to the local structural orderings of the involved phases and their evolution toward forming LVP phase using in situ/ex situ synchrotron X-ray and electron-beam diffraction, spectroscopy, and imaging techniques. The results shed light on the thermodynamics and kinetics of synthesis reactions and enabled the design ofmore » a cost-efficient synthesis protocol to make nanocrystalline LVP, wherein solvothermal treatment is a crucial step leading to an amorphous intermediate with local structural ordering resembling that of LVP, which, upon calcination at moderate temperatures, rapidly transforms into the desired LVP phase. The obtained LVP particles are about 50 nm, coated with a thin layer of amorphous carbon and featured with excellent cycling stability and rate capability – 95% capacity retention after 200 cycles and 66% theoretical capacity even at a current rate of 10 C. The structure tracking based method we developed in this work offers a new way of designing battery electrodes with synthetic control of material phases and properties.« less

  4. Computer aided production engineering

    SciTech Connect

    Not Available

    1986-01-01

    This book presents the following contents: CIM in avionics; computer analysis of product designs for robot assembly; a simulation decision mould for manpower forecast and its application; development of flexible manufacturing system; advances in microcomputer applications in CAD/CAM; an automated interface between CAD and process planning; CAM and computer vision; low friction pneumatic actuators for accurate robot control; robot assembly of printed circuit boards; information systems design for computer integrated manufacture; and a CAD engineering language to aid manufacture.

  5. Software aids plant management

    SciTech Connect

    Winiger, T. )

    1992-11-01

    This paper reports that for most utilities, computer aided engineering (CAE) systems are currently used for operating plant support rather than new plant design particularly for nuclear plant maintenance. For nuclear power generating utilities, switching to a modern, integrated CAE information system can offer significant benefits. During the last decade, however, most engineering automation in the power generation industry focused on computer-aided drafting and stand-alone engineering applications. An integrated CAE system can be a useful too, assisting engineers with many engineering and operational activities. It also can be used to manage the massive amount of information created throughout the life of a plant.

  6. SADIST (the SAndia Data Index STructure): a stand-alone data base for computer-aided design and general use

    SciTech Connect

    Stauffer, J D

    1980-11-01

    A file structure has been designed that fills the needs of multilevel hierarchical design of integrated circuits (ICs). Since the structure is actualized by a stand-alone FORTRAN program, it is applicable to general-purpose use in situations where the structure of the data modeled is similar to that of IC data. Though the structure itself is a FORTRAN direct-access file, its interface with user programs is a small sequential subfile accessible to FORTRAN, PASCAL, and most other languages. This ability facilitates linkup to systems already in use and requires minimal recoding. Backup, restore, and other data base recovery and integrity operations are automatic, but may be initiated by the user if desired. 3 figures.

  7. A self-designed instrument to evaluate cavosurface angle for class I amalgam cavity preparation: A learning aid.

    PubMed

    Arora, Ankit; Acharya, Shashi Rashmi; Ballal, Vasudev; Sharma, Padmaja

    2012-07-01

    Fighting the controversies, amalgam, as a posterior restorative material has survived till date. The fate of amalgam restoration is determined by geometry of the cavity preparation and cavosurface angle is one integral part of the cavity, which decides the marginal characteristics of the restoration and health of the tooth. Low edge strength of amalgam highlights the importance of cavosurface angle. However, at the same time conservation of the tooth also should be considered. This article presents a self-designed instrument to evaluate and obtain a cavosurface angle close to 110°. The design of the instrument also helps in evaluating parameters, such as depth of the cavity, undercut angle, and allows finishing of the buccal or lingual walls.

  8. Dietitian Aide.

    ERIC Educational Resources Information Center

    Texas Tech. Univ., Lubbock. School of Home Economics.

    This course of study for the dietitian aide is one of a series available for use by teacher-coordinators and students in Grade 11 and 12 home economics cooperative education programs. Based on job analysis interviews with health care facilities personnel, this course was prepared by teachers and Instructional Materials Center staff, field-tested,…

  9. A Virtual Test Approach to Incorporate Materials and Manufacturing Processes to Aid Design choices in High Performance Composites

    NASA Astrophysics Data System (ADS)

    Gonzalez-Murillo, C.; Price, M.

    2011-05-01

    The increasing use of fibre reinforced composites in structural components in the aerospace industry is providing many challenges to designers in understanding how they can be used more effectively to exploit their advantages. One of the main challenges is the selection of lay-ups for a given application. The difficulty lies in the variability that is achievable with composites. Each new layup or configuration is effectively a new material and requires and extensive test programme to validate the performance, from coupons which give basic material characteristics, up through the test pyramid through to large sub-component which contains basic assemblies. This variety of testing gives confidence in understanding the material behaviour and performance in structural assemblies. On the other hand, the manufacturing process is also important here with different processes sometimes needed for different materials or thicknesses. This is a time consuming and expensive process requiring many thousands of small tests leading up to a few major tests which are complex to set up and carry out. This research is attempting to address this by developing a virtual test system which will sit hand-in-hand with a physical test system. The goal of virtual tests appears reachable using the finite element analysis technique in which many experimental tests can be replaced by high fidelity simulations. The payoff in reduced cycle time and costs for designing and certifying composite structures is very attractive; and the possibility also arises of considering material configurations that are too complex to certify by purely empirical methods. The validated simulations could then be subsequently used for variants or derivatives of composites to inform design choices and establish new validation programmes where appropriate. This paper presents a series of simulations of the critical testing procedures needed to validate high performance composites materials using linear and non

  10. Theoretical Prediction of Am(III)/Eu(III) Selectivity to Aid the Design of Actinide-Lanthanide Separation Agents

    DOE PAGES

    Bryantsev, Vyacheslav S.; Hay, Benjamin P.

    2015-03-20

    Selective extraction of minor actinides from lanthanides is a critical step in the reduction of radiotoxicity of spent nuclear fuels. However, the design of suitable ligands for separating chemically similar 4f- and 5f-block trivalent metal ions poses a significant challenge. Furthermore, first-principles calculations should play an important role in the design of new separation agents, but their ability to predict metal ion selectivity has not been systematically evaluated. We examine the ability of several density functional theory methods to predict selectivity of Am(III) and Eu(III) with oxygen, mixed oxygen–nitrogen, and sulfur donor ligands. The results establish a computational method capablemore » of predicting the correct order of selectivities obtained from liquid–liquid extraction and aqueous phase complexation studies. To allow reasonably accurate predictions, it was critical to employ sufficiently flexible basis sets and provide proper account of solvation effects. The approach is utilized to estimate the selectivity of novel amide-functionalized diazine and 1,2,3-triazole ligands.« less

  11. Theoretical Prediction of Am(III)/Eu(III) Selectivity to Aid the Design of Actinide-Lanthanide Separation Agents

    SciTech Connect

    Bryantsev, Vyacheslav S.; Hay, Benjamin P.

    2015-03-20

    Selective extraction of minor actinides from lanthanides is a critical step in the reduction of radiotoxicity of spent nuclear fuels. However, the design of suitable ligands for separating chemically similar 4f- and 5f-block trivalent metal ions poses a significant challenge. Furthermore, first-principles calculations should play an important role in the design of new separation agents, but their ability to predict metal ion selectivity has not been systematically evaluated. We examine the ability of several density functional theory methods to predict selectivity of Am(III) and Eu(III) with oxygen, mixed oxygen–nitrogen, and sulfur donor ligands. The results establish a computational method capable of predicting the correct order of selectivities obtained from liquid–liquid extraction and aqueous phase complexation studies. To allow reasonably accurate predictions, it was critical to employ sufficiently flexible basis sets and provide proper account of solvation effects. The approach is utilized to estimate the selectivity of novel amide-functionalized diazine and 1,2,3-triazole ligands.

  12. Rapid Computer Aided Ligand Design and Screening of Precious Metal Extractants from TRUEX Raffinate with Experimental Validation

    SciTech Connect

    Clark, Aurora Sue; Wall, Nathalie; Benny, Paul

    2015-11-16

    through the design of a software program that uses state-of-the-art computational combinatorial chemistry, and is developed and validated with experimental data acquisition; the resulting tool allows for rapid design and screening of new ligands for the extraction of precious metals from SNF. This document describes the software that has been produced, ligands that have been designed, and fundamental new understandings of the extraction process of Rh(III) as a function of solution phase conditions (pH, nature of acid, etc.).

  13. Sensitive quantitation of polyamines in plant foods by ultrasound-assisted benzoylation and dispersive liquid-liquid microextraction with the aid of experimental designs.

    PubMed

    Pinto, Edgar; Melo, Armindo; Ferreira, Isabel M P L V O

    2014-05-14

    A new method involving ultrasound-assisted benzoylation and dispersive liquid-liquid microextraction was optimized with the aid of chemometrics for the extraction, cleanup, and determination of polyamines in plant foods. Putrescine, cadaverine, spermidine, and spermine were derivatized with 3,5-dinitrobenzoyl chloride and extracted by dispersive liquid-liquid microextraction using acetonitrile and carbon tetrachloride as dispersive and extraction solvents, respectively. Two-level full factorial design and central composite design were applied to select the most appropriate derivatization and extraction conditions. The developed method was linear in the 0.5-10.0 mg/L range, with a R(2) ≥ 0.9989. Intra- and interday precisions ranged from 0.8 to 6.9% and from 3.0 to 10.3%, respectively, and the limit of detection ranged between 0.018 and 0.042 μg/g of fresh weight. This method was applied to the analyses of six different types of plant foods, presenting recoveries between 81.7 and 114.2%. The method is inexpensive, versatile, simple, and sensitive.

  14. Recoding of the Vesicular Stomatitis Virus L Gene by Computer-Aided Design Provides a Live, Attenuated Vaccine Candidate

    PubMed Central

    Wang, Bingyin; Yang, Chen; Tekes, Gergely; Mueller, Steffen; Paul, Aniko; Whelan, Sean P. J.

    2015-01-01

    ABSTRACT Codon pair bias (CPB), which has been observed in all organisms, is a neglected genomic phenomenon that affects gene expression. CPB results from synonymous codons that are paired more or less frequently in ORFeomes regardless of codon bias. The effect of an individual codon pair change is usually small, but when it is amplified by large-scale genome recoding, strikingly altered biological phenotypes are observed. The utility of codon pair bias in the development of live attenuated vaccines was recently demonstrated by recodings of poliovirus (a positive-strand RNA virus) and influenza virus (a negative-strand segmented RNA virus). Here, the L gene of vesicular stomatitis virus (VSV), a nonsegmented negative-sense RNA virus, was partially recoded based on codon pair bias. Totals of 858 and 623 silent mutations were introduced into a 5′-terminal segment of the viral L gene (designated L1) to create sequences containing either overrepresented or underrepresented codon pairs, designated L1sdmax and L1min, respectively. Analysis revealed that recombinant VSV containing the L1min sequence could not be recovered, whereas the virus with the sdmax sequence showed a modest level of attenuation in cell culture. More strikingly, in mice the L1sdmax virus was almost as immunogenic as the parental strain but highly attenuated. Taken together, these results open a new road to attain a balance between VSV virulence and immunogenicity, which could serve as an example for the attenuation of other negative-strand, nonsegmented RNA viruses. PMID:25827413

  15. Design, Development and Preliminary Student Evaluation of Virtual Field Guides as aids to teaching and learning in the Earth sciences

    NASA Astrophysics Data System (ADS)

    Stott, Tim

    2010-05-01

    , J., Kneale, P., Sougnez, Y., Stewart, M., and Stott, T. A. (2003). Carrying out Pedagogic research into the Constructive Alignment of Fieldwork. Planet Special Edition 5: Linking Teaching and Research and undertaking Pedagogic Research in Geography, Earth and Environmental Sciences, 51-52. Carmichael, P. (2008) ‘The Semantic Web and ‘Web 3.0' in: Selwyn, N. (ed.) Education 2.0? Designing the web for teaching and learning. London: ESRC Teaching and Learning Research Programme. Fletcher, S., France, D., Moore, K. and Robinson, G. (2002). Fieldwork education and technology: A GEES perspective, Planet 4, 17-19. Fletcher, S., France, D., Moore, K. and Robinson, G. (2007). Putting technology into fieldwork education: A pedagogic evaluation. Journal of Geography in Higher Education 31, 2, 319 - 330 Maskall, J., Stokes, A., Truscott, J. B., Bridge, A., Magnier, K. and Calderbank, V. (2007) Supporting fieldwork using information technology, Planet 18, 18-21. Stott, TA., Nuttall, AM. and McCloskey, J. (2009a) Design, Development and Student Evaluation of a Virtual Alps Field Guide www.virtualalps.co.uk. Planet 22, 64-71. Publication of the Higher Education Academy Subject Centre for Geography, Earth and Environmental Sciences, Learning & Teaching Support Network www.gees.ac.uk/planet/. Stott, TA, Clark, H., Milson, C., McCloskey, J. and Crompton, K. (2009b) The Ingleton Waterfalls Virtual Field Trip: Design, Development and Preliminary Evaluation, Teaching Earth Sciences 34 (1), 13-19, Magazine of the Earth Science Teachers Association.

  16. Computer-aided design of nanostructures from self- and directed-assembly of soft matter building blocks

    NASA Astrophysics Data System (ADS)

    Nguyen, Trung Dac

    2011-12-01

    Functional materials that are active at nanometer scales and adaptive to environment have been highly desirable for a huge array of novel applications ranging from photonics, sensing, fuel cells, smart materials to drug delivery and miniature robots. These bio-inspired features imply that the underlying structure of this type of materials should possess a well-defined ordering as well as the ability to reconfigure in response to a given external stimulus such as temperature, electric field, pH or light. In this thesis, we employ computer simulation as a design tool, demonstrating that various ordered and reconfigurable structures can be obtained from the self- and directed-assembly of soft matter nano-building blocks such as nanoparticles, polymer-tethered nanoparticles and colloidal particles. We show that, besides thermodynamic parameters, the self-assembly of these building blocks is governed by nanoparticle geometry, the number and attachment location of tethers, solvent selectivity, balance between attractive and repulsive forces, nanoparticle size polydispersity, and field strength. We demonstrate that higher-order nanostructures, i.e. those for which the correlation length is much greater than the length scale of individual assembling building blocks, can be hierarchically assembled. For instance, bilayer sheets formed by laterally tethered rods fold into spiral scrolls and helical structures, which are able to adopt different morphologies depending on the environmental condition. We find that a square grid structure formed by laterally tethered nanorods can be transformed into a bilayer sheet structure, and vice versa, upon shortening, or lengthening, the rod segments, respectively. From these inspiring results, we propose a general scheme by which shape-shifting particles are employed to induce the reconfiguration of pre-assembled structures. Finally, we investigate the role of an external field in assisting the formation of assembled structures that would

  17. Kansas Nursing Home Medication Aide Curriculum. Revised.

    ERIC Educational Resources Information Center

    Bartel, Myrna J.; Fornelli, Linda K.

    This curriculum guide is designed to aid Kansas instructors in conducting a course for teaching nursing home medication aides. Covered first are various introductory topics such as the role and responsibilities of medication aides, pharmacodynamics, forms in which medication is now available, common medical abbreviations, mathematics and weights…

  18. Computer-aided design of liposomal drugs: In silico prediction and experimental validation of drug candidates for liposomal remote loading.

    PubMed

    Cern, Ahuva; Barenholz, Yechezkel; Tropsha, Alexander; Goldblum, Amiram

    2014-01-10

    Previously we have developed and statistically validated Quantitative Structure Property Relationship (QSPR) models that correlate drugs' structural, physical and chemical properties as well as experimental conditions with the relative efficiency of remote loading of drugs into liposomes (Cern et al., J. Control. Release 160 (2012) 147-157). Herein, these models have been used to virtually screen a large drug database to identify novel candidate molecules for liposomal drug delivery. Computational hits were considered for experimental validation based on their predicted remote loading efficiency as well as additional considerations such as availability, recommended dose and relevance to the disease. Three compounds were selected for experimental testing which were confirmed to be correctly classified by our previously reported QSPR models developed with Iterative Stochastic Elimination (ISE) and k-Nearest Neighbors (kNN) approaches. In addition, 10 new molecules with known liposome remote loading efficiency that were not used by us in QSPR model development were identified in the published literature and employed as an additional model validation set. The external accuracy of the models was found to be as high as 82% or 92%, depending on the model. This study presents the first successful application of QSPR models for the computer-model-driven design of liposomal drugs.

  19. Computer-aided design of liposomal drugs: in silico prediction and experimental validation of drug candidates for liposomal remote loading

    PubMed Central

    Cern, Ahuva; Barenholz, Yechezkel; Tropsha, Alexander; Goldblum, Amiram

    2014-01-01

    Previously we have developed and statistically validated Quantitative Structure Property Relationship (QSPR) models that correlate drugs’ structural, physical and chemical properties as well as experimental conditions with the relative efficiency of remote loading of drugs into liposomes (Cern et al, Journal of Controlled Release, 160(2012) 14–157). Herein, these models have been used to virtually screen a large drug database to identify novel candidate molecules for liposomal drug delivery. Computational hits were considered for experimental validation based on their predicted remote loading efficiency as well as additional considerations such as availability, recommended dose and relevance to the disease. Three compounds were selected for experimental testing which were confirmed to be correctly classified by our previously reported QSPR models developed with Iterative Stochastic Elimination (ISE) and k-nearest neighbors (kNN) approaches. In addition, 10 new molecules with known liposome remote loading efficiency that were not used in QSPR model development were identified in the published literature and employed as an additional model validation set. The external accuracy of the models was found to be as high as 82% or 92%, depending on the model. This study presents the first successful application of QSPR models for the computer-model-driven design of liposomal drugs. PMID:24184343

  20. Design of a multi-sensor sonar system for indoor range measurement as a navigational aid for the blind.

    PubMed

    Choudhury, Maroof H; Barreto, Armando

    2003-01-01

    This paper reports the methodology for the design of a sonar-based ranging and guidance system. The intended application of the system is to help a blind person avoid obstacles as he/she navigates his/her environment. Six sonar transceivers are arranged radially on a headgear worn by the user. The transceivers detect discrete range data at discrete-time sampling instances. A panoramic map of the environment is generated from the discrete-space sensory data. The paper emphasizes the challenges faced during the measurement of omnidirectional ranging information in indoor environments. Situations have been identified where erroneous range readings are generated due to channel cross talk caused by echo bouncing off multiple surfaces. Several sonar control and measurement schemes were developed and tested to avoid these situations. The results and performance of these different control schemes are compared in this paper. A microcontroller-based system commands the sonar ping sequences, acquires the echo return times and computes the ranges. The set of range data is transmitted to a PC, which utilizes the information to build a spatialized audio map of the surrounding obstacles. The hardware and software layout for the system are described in this paper.