Science.gov

Sample records for aided drafting cad

  1. Preparing Students for Computer Aided Drafting (CAD). A Conceptual Approach.

    ERIC Educational Resources Information Center

    Putnam, A. R.; Duelm, Brian

    This presentation outlines guidelines for developing and implementing an introductory course in computer-aided drafting (CAD) that is geared toward secondary-level students. The first section of the paper, which deals with content identification and selection, includes lists of mechanical drawing and CAD competencies and a list of rationales for…

  2. A Multidisciplinary Research Team Approach to Computer-Aided Drafting (CAD) System Selection. Final Report.

    ERIC Educational Resources Information Center

    Franken, Ken; And Others

    A multidisciplinary research team was assembled to review existing computer-aided drafting (CAD) systems for the purpose of enabling staff in the Design Drafting Department at Linn Technical College (Missouri) to select the best system out of the many CAD systems in existence. During the initial stage of the evaluation project, researchers…

  3. Revision of Electro-Mechanical Drafting Program to Include CAD/D (Computer-Aided Drafting/Design). Final Report.

    ERIC Educational Resources Information Center

    Snyder, Nancy V.

    North Seattle Community College decided to integrate computer-aided design/drafting (CAD/D) into its Electro-Mechanical Drafting Program. This choice necessitated a redefinition of the program through new curriculum and course development. To initiate the project, a new industrial advisory council was formed. Major electronic and recruiting firms…

  4. Selection and implementation of a computer aided design and drafting (CAD/D) system

    SciTech Connect

    Davis, J.P.

    1981-01-01

    Faced with very heavy workloads and limited engineering and graphics personnel, Transco opted for a computer-aided design and drafting system that can produce intelligent drawings, which have associated data bases that can be integrated with other graphical and nongraphical data bases to form comprehensive sets of data for construction projects. Because so much time was being spent in all phases of materials and inventory control, Transco decided to integrate materials-management capabilities into the CAD/D system. When a specific item of material is requested on the graphics equipment, the request triggers production of both the drawing and a materials list. Transco plans to extend its computer applications into mapping tasks as well.

  5. Computer Aided Drafting. Instructor's Guide.

    ERIC Educational Resources Information Center

    Henry, Michael A.

    This guide is intended for use in introducing students to the operation and applications of computer-aided drafting (CAD) systems. The following topics are covered in the individual lessons: understanding CAD (CAD versus traditional manual drafting and care of software and hardware); using the components of a CAD system (primary and other input…

  6. Mechanical Drafting with CAD. Teacher Edition.

    ERIC Educational Resources Information Center

    McClain, Gerald R.

    This instructor's manual contains 13 units of instruction for a course on mechanical drafting with options for using computer-aided drafting (CAD). Each unit includes some or all of the following basic components of a unit of instruction: objective sheet, suggested activities for the teacher, assignment sheets and answers to assignment sheets,…

  7. Computer Aided Drafting Workshop. Workshop Booklet.

    ERIC Educational Resources Information Center

    Goetsch, David L.

    This mini-course and article are presentations from a workshop on computer-aided drafting. The purpose of the mini-course is to assist drafting instructors in updating their occupational knowledge to include computer-aided drafting (CAD). Topics covered in the course include general computer information, the computer in drafting, CAD terminology,…

  8. Integrated Computer-Aided Drafting Instruction (ICADI).

    ERIC Educational Resources Information Center

    Chen, C. Y.; McCampbell, David H.

    Until recently, computer-aided drafting and design (CAD) systems were almost exclusively operated on mainframes or minicomputers and their cost prohibited many schools from offering CAD instruction. Today, many powerful personal computers are capable of performing the high-speed calculation and analysis required by the CAD application; however,…

  9. The polar phase response property of monopolar ECG voltages using a Computer-Aided Design and Drafting (CAD)-based data acquisition system.

    PubMed

    Goswami, B; Mitra, M; Nag, B; Mitra, T K

    1993-11-01

    The present paper discusses a Computer-Aided Design and Drafting (CAD) based data acquisition and polar phase response study of the ECG. The scalar ECG does not show vector properties although such properties are embedded in it. In the present paper the polar phase response property of monopolar chest lead (V1 to V6) ECG voltages has been studied. A software tool has been used to evaluate the relative phase response of ECG voltages. The data acquisition of monopolar ECG records of chest leads V1 to V6 from the chart recorder has been done with the help of the AutoCAD application package. The spin harmonic constituents of ECG voltages are evaluated at each harmonic plane and the polar phase responses are studied at each plane. Some interesting results have been observed in some typical cases which are discussed in the paper. PMID:8307653

  10. Incorporating CAD Instruction into the Drafting Curriculum.

    ERIC Educational Resources Information Center

    Yuen, Steve Chi-Yin

    1990-01-01

    If education is to meet the challenged posed by the U.S. productivity crisis and the large number of computer-assisted design (CAD) workstations forecast as necessary in the future, schools must integrate CAD into the drafting curriculum and become aggressive in providing CAD training. Teachers need to maintain close contact with local industries…

  11. Pipe Drafting with CAD. Teacher Edition.

    ERIC Educational Resources Information Center

    Smithson, Buddy

    This teacher's guide contains nine units of instruction for a course on computer-assisted pipe drafting. The course covers the following topics: introduction to pipe drafting with CAD (computer-assisted design); flow diagrams; pipe and pipe components; valves; piping plans and elevations; isometrics; equipment fabrication drawings; piping design…

  12. A Suggested Computer Aided Drafting Curriculum (Dacum Based).

    ERIC Educational Resources Information Center

    Pedras, Melvin J.; Hoggard, David

    Computer-aided drawing can bring new technology into the drafting classroom. One approach to computer-aided drafting (CAD) involves use of a personal computer and purchased software. Existing school computers could be shared to reduce costs. Following this narrative introduction, a suggested curriculum for the teaching of CAD is presented in…

  13. Computer-Aided Drafting. Education for Technology Employment.

    ERIC Educational Resources Information Center

    Northern Illinois Univ., De Kalb. Dept. of Technology.

    This computer-aided drafting (CAD) curriculum was developed to provide drafting instructors in Illinois with a useful guide for relating an important new technological advance to the vocational classroom. The competency-based learning activity guides are written to be used with any CAD system being used at the secondary and postsecondary levels.…

  14. PC Board Layout and Electronic Drafting with CAD. Teacher Edition.

    ERIC Educational Resources Information Center

    Bryson, Jimmy

    This teacher's guide contains 11 units of instruction for a course on computer electronics and computer-assisted drafting (CAD) using a personal computer (PC). The course covers the following topics: introduction to electronic drafting with CAD; CAD system and software; basic electronic theory; component identification; basic integrated circuit…

  15. Continuity of computer-aided drafting operations

    SciTech Connect

    Jacobson, L.D.

    1987-09-01

    The operating performance, operating procedures, and equipment added are discussed for the Computer Aided Drafting (CAD) operation at UNC Nuclear Industries before consolidation of operating contracts at the US Department of Energy (DOE) facilities located at the Hanford Site, near Richland, Washington.

  16. Career Directions for Drafting CAD Technicians.

    ERIC Educational Resources Information Center

    Moore, Pam

    2002-01-01

    Provides information careers for drafting/computer-assisted drafting technicians, including salaries, responsibilities, employment outlook, working conditions, skills needed, and career advancement opportunities. Lists professional drafting organizations. (JOW)

  17. Computer-Aided Design (CAD).

    ERIC Educational Resources Information Center

    Burns, William E.

    1986-01-01

    Discusses the field of computer-aided design, which combines the skills and creativity of the architect, designer, drafter, and engineer with the power of the computer. Reports on job tasks, applications, background of the field, job outlook, and necessary training. (CH)

  18. Computer Aided Drafting Curriculum for Vocational Drafting. A Competency Based Unit of Instruction. Final Report.

    ERIC Educational Resources Information Center

    Peck, Greg

    This document contains (1) the final report of a project to develop a computer-aided drafting (CAD) curriculum and (2) a competency-based unit of instruction for use with the CADAPPLE system. The final report states the problem and project objective, presents conclusions and recommendations, and includes survey instruments. The unit is designed…

  19. Computer-aided diagnosis (CAD) for colonoscopy

    NASA Astrophysics Data System (ADS)

    Gu, Jia; Poirson, Allen

    2007-03-01

    Colorectal cancer is the second leading cause of cancer deaths, and ranks third for new cancer cases and cancer mortality for both men and women. However, its death rate can be dramatically reduced by appropriate treatment when early detection is available. The purpose of colonoscopy is to identify and assess the severity of lesions, which may be flat or protruding. Due to the subjective nature of the examination, colonoscopic proficiency is highly variable and dependent upon the colonoscopist's knowledge and experience. An automated image processing system providing an objective, rapid, and inexpensive analysis of video from a standard colonoscope could provide a valuable tool for screening and diagnosis. In this paper, we present the design, functionality and preliminary results of its Computer-Aided-Diagnosis (CAD) system for colonoscopy - ColonoCAD TM. ColonoCAD is a complex multi-sensor, multi-data and multi-algorithm image processing system, incorporating data management and visualization, video quality assessment and enhancement, calibration, multiple view based reconstruction, feature extraction and classification. As this is a new field in medical image processing, our hope is that this paper will provide the framework to encourage and facilitate collaboration and discussion between industry, academia, and medical practitioners.

  20. Computer-aided-diagnosis (CAD) for colposcopy

    NASA Astrophysics Data System (ADS)

    Lange, Holger; Ferris, Daron G.

    2005-04-01

    Uterine cervical cancer is the second most common cancer among women worldwide. Colposcopy is a diagnostic method, whereby a physician (colposcopist) visually inspects the lower genital tract (cervix, vulva and vagina), with special emphasis on the subjective appearance of metaplastic epithelium comprising the transformation zone on the cervix. Cervical cancer precursor lesions and invasive cancer exhibit certain distinctly abnormal morphologic features. Lesion characteristics such as margin; color or opacity; blood vessel caliber, intercapillary spacing and distribution; and contour are considered by colposcopists to derive a clinical diagnosis. Clinicians and academia have suggested and shown proof of concept that automated image analysis of cervical imagery can be used for cervical cancer screening and diagnosis, having the potential to have a direct impact on improving women"s health care and reducing associated costs. STI Medical Systems is developing a Computer-Aided-Diagnosis (CAD) system for colposcopy -- ColpoCAD. At the heart of ColpoCAD is a complex multi-sensor, multi-data and multi-feature image analysis system. A functional description is presented of the envisioned ColpoCAD system, broken down into: Modality Data Management System, Image Enhancement, Feature Extraction, Reference Database, and Diagnosis and directed Biopsies. The system design and development process of the image analysis system is outlined. The system design provides a modular and open architecture built on feature based processing. The core feature set includes the visual features used by colposcopists. This feature set can be extended to include new features introduced by new instrument technologies, like fluorescence and impedance, and any other plausible feature that can be extracted from the cervical data. Preliminary results of our research on detecting the three most important features: blood vessel structures, acetowhite regions and lesion margins are shown. As this is a new

  1. CBT Pilot Program Instructional Guide. Basic Drafting Skills Curriculum Delivered through CAD Workstations and Artificial Intelligence Software.

    ERIC Educational Resources Information Center

    Smith, Richard J.; Sauer, Mardelle A.

    This guide is intended to assist teachers in using computer-aided design (CAD) workstations and artificial intelligence software to teach basic drafting skills. The guide outlines a 7-unit shell program that may also be used as a generic authoring system capable of supporting computer-based training (CBT) in other subject areas. The first section…

  2. Content and Strategies for Teaching Computer Aided Drafting.

    ERIC Educational Resources Information Center

    Becker, Kurt

    1991-01-01

    A Delphi panel of 15 experts determined that (1) computer-assisted drafting (CAD) and traditional drafting are complementary; (2) differences in teaching strategies related to use of computers versus traditional drafting instruments; and (3) traditional drafting knowledge and skills are very important for CAD. (SK)

  3. TRAD or CAD? A Comparison.

    ERIC Educational Resources Information Center

    Resetarits, Paul J.

    1989-01-01

    Studies whether traditional drafting equipment (TRAD) or computer aided drafting equipment (CAD) is more effective. Proposes that students using only CAD can learn principles of drafting as well as students using only TRAD. Reports no significant difference either on achievement or attitude. (MVL)

  4. The Correlation between Visual-Haptic Perceptual Style and Student Ability To Solve Orthographic Projection Problems in a Beginning College Drafting Course Incorporating Computer Aided Drafting.

    ERIC Educational Resources Information Center

    Baird, David A.

    A study determined the effectiveness of computer-aided drafting (CAD) and standard drafting instruction on the ability of students with differing visual-haptic perceptual styles to solve orthographic projection problems. A 2x2x2 factorial design was chosen to compare two levels of perceptual style with two levels of treatment and two levels of…

  5. Computer Aided Drafting Packages for Secondary Education. Edition 1. Apple II and Macintosh. A MicroSIFT Quarterly Report.

    ERIC Educational Resources Information Center

    Pollard, Jim

    This report reviews software packages for Apple Macintosh and Apple II computers available to secondary schools to teach computer-aided drafting (CAD). Products for the report were gathered through reviews of CAD periodicals, computers in education periodicals, advertisements, and teacher recommendations. The first section lists the primary…

  6. Computer Aided Drafting Packages for Secondary Education. Edition 2. PC DOS Compatible Programs. A MicroSIFT Quarterly Report.

    ERIC Educational Resources Information Center

    Pollard, Jim

    This report reviews eight IBM-compatible software packages that are available to secondary schools to teach computer-aided drafting (CAD). Software packages to be considered were selected following reviews of CAD periodicals, computers in education periodicals, advertisements, and recommendations of teachers. The packages were then rated by…

  7. A Comparison of the Effectiveness between Computer Aided Drafting and the Traditional Drafting Techniques as Methods of Teaching Pictorial and Multiview Drawings.

    ERIC Educational Resources Information Center

    Kashef, Ali E.

    A study was conducted to determine the effectiveness of teaching multiview and pictorial drawing using traditional methods and using computer-aided drafting (CAD). Research used a quasi-experimental design; subjects were 37 full- and part-time undergraduate students in industrial technology or technology education courses. The students were…

  8. Refining a brief decision aid in stable CAD: cognitive interviews

    PubMed Central

    2014-01-01

    Background We describe the results of cognitive interviews to refine the “Making Choices©” Decision Aid (DA) for shared decision-making (SDM) about stress testing in patients with stable coronary artery disease (CAD). Methods We conducted a systematic development process to design a DA consistent with International Patient Decision Aid Standards (IPDAS) focused on Alpha testing criteria. Cognitive interviews were conducted with ten stable CAD patients using the “think aloud” interview technique to assess the clarity, usefulness, and design of each page of the DA. Results Participants identified three main messages: 1) patients have multiple options based on stress tests and they should be discussed with a physician, 2) take care of yourself, 3) the stress test is the gold standard for determining the severity of your heart disease. Revisions corrected the inaccurate assumption of item number three. Conclusions Cognitive interviews proved critical for engaging patients in the development process and highlighted the necessity of clear message development and use of design principles that make decision materials easy to read and easy to use. Cognitive interviews appear to contribute critical information from the patient perspective to the overall systematic development process for designing decision aids. PMID:24521210

  9. Role of computer aided detection (CAD) integration: case study with meniscal and articular cartilage CAD applications

    NASA Astrophysics Data System (ADS)

    Safdar, Nabile; Ramakrishna, Bharath; Saiprasad, Ganesh; Siddiqui, Khan; Siegel, Eliot

    2008-03-01

    Knee-related injuries involving the meniscal or articular cartilage are common and require accurate diagnosis and surgical intervention when appropriate. With proper techniques and experience, confidence in detection of meniscal tears and articular cartilage abnormalities can be quite high. However, for radiologists without musculoskeletal training, diagnosis of such abnormalities can be challenging. In this paper, the potential of improving diagnosis through integration of computer-aided detection (CAD) algorithms for automatic detection of meniscal tears and articular cartilage injuries of the knees is studied. An integrated approach in which the results of algorithms evaluating either meniscal tears or articular cartilage injuries provide feedback to each other is believed to improve the diagnostic accuracy of the individual CAD algorithms due to the known association between abnormalities in these distinct anatomic structures. The correlation between meniscal tears and articular cartilage injuries is exploited to improve the final diagnostic results of the individual algorithms. Preliminary results from the integrated application are encouraging and more comprehensive tests are being planned.

  10. School District Uses Computer Aided Design and Drafting.

    ERIC Educational Resources Information Center

    Lorentz, Gordon S.

    1988-01-01

    Computer Aided Design and Drafting (CADD) programs are used to teach drafting at an Indiana high school. The school system's maintenance department shared use of the software and equipment to produce original drawings of school buildings. (MLF)

  11. The Effects of Cooperative and Individualistic Learning Structures on Achievement in a College-Level Computer-Aided Drafting Course

    ERIC Educational Resources Information Center

    Swab, A. Geoffrey

    2012-01-01

    This study of cooperative learning in post-secondary engineering education investigated achievement of engineering students enrolled in two intact sections of a computer-aided drafting (CAD) course. Quasi-experimental and qualitative methods were employed in comparing student achievement resulting from out-of-class cooperative and individualistic…

  12. Creation of Anatomically Accurate Computer-Aided Design (CAD) Solid Models from Medical Images

    NASA Technical Reports Server (NTRS)

    Stewart, John E.; Graham, R. Scott; Samareh, Jamshid A.; Oberlander, Eric J.; Broaddus, William C.

    1999-01-01

    Most surgical instrumentation and implants used in the world today are designed with sophisticated Computer-Aided Design (CAD)/Computer-Aided Manufacturing (CAM) software. This software automates the mechanical development of a product from its conceptual design through manufacturing. CAD software also provides a means of manipulating solid models prior to Finite Element Modeling (FEM). Few surgical products are designed in conjunction with accurate CAD models of human anatomy because of the difficulty with which these models are created. We have developed a novel technique that creates anatomically accurate, patient specific CAD solids from medical images in a matter of minutes.

  13. Producing geological illustrations using pc-based computer-aided drafting

    NASA Astrophysics Data System (ADS)

    Cameron, Kenneth L.; Cameron, Debra D.; Kelleher, Patrick C.

    Computer-aided drafting (CAD) software for IBM-compatible personal computers now has the power to produce complex illustrations such as geologic maps. Applications programs can be written that automate repetitive drafting tasks; nevertheless, it may take as long to enter the illustration in the computer as it would take to draft by hand. Once entered, however, the time required to edit and update the illustration may be reduced greatly compared to traditional methods. In addition, maps and other illustrations can be plotted at practically any scale with information shown appropriate for that scale. Areas can be "windowed" and plotted individually, and combinations of data (layers) can be plotted to produce a variety of illustrations from a single drawing file. The quality of the final product can equal or exceed that of traditional drafting. Beyond these basic applications, CAD software can perform graphics-related tasks that would otherwise be difficult or impossible. Such tasks include manipulating USGS digital maps, and interfacing with large textual databases to form geographic information systems.

  14. 78 FR 66940 - Regulatory Requirements for Hearing Aid Devices and Personal Sound Amplification Products; Draft...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-07

    ... Sound Amplification Products; Draft Guidance for Industry and Food and Drug Administration Staff... Hearing Aid Devices and Personal Sound Amplification Products.'' This draft guidance clarifies the distinction between hearing aids and personal sound amplification products (PSAPs), as well as the...

  15. Surgical retained foreign object (RFO) prevention by computer aided detection (CAD)

    NASA Astrophysics Data System (ADS)

    Marentis, Theodore C.; Hadjiiyski, Lubomir; Chaudhury, Amrita R.; Rondon, Lucas; Chronis, Nikolaos; Chan, Heang-Ping

    2014-03-01

    Surgical Retained Foreign Objects (RFOs) cause significant morbidity and mortality. They are associated with $1.5 billion annually in preventable medical costs. The detection accuracy of radiographs for RFOs is a mediocre 59%. We address the RFO problem with two complementary technologies: a three dimensional (3D) Gossypiboma Micro Tag (μTa) that improves the visibility of RFOs on radiographs, and a Computer Aided Detection (CAD) system that detects the μTag. The 3D geometry of the μTag produces a similar 2D depiction on radiographs regardless of its orientation in the human body and ensures accurate detection by a radiologist and the CAD. We create a database of cadaveric radiographs with the μTag and other common man-made objects positioned randomly. We develop the CAD modules that include preprocessing, μTag enhancement, labeling, segmentation, feature analysis, classification and detection. The CAD can operate in a high specificity mode for the surgeon to allow for seamless workflow integration and function as a first reader. The CAD can also operate in a high sensitivity mode for the radiologist to ensure accurate detection. On a data set of 346 cadaveric radiographs, the CAD system performed at a high specificity (85.5% sensitivity, 0.02 FPs/image) for the OR and a high sensitivity (96% sensitivity, 0.73 FPs/image) for the radiologists.

  16. PROGRAMMING EXERCISES FOR COMPUTER AIDED DRAFTING (TITLE SUPPLIED).

    ERIC Educational Resources Information Center

    Miami-Dade Junior Coll., FL.

    REFERENCE MATERIAL AND PROGRAMING EXERCISES USED FOR THE COMPUTER AIDED DRAFTING SUMMER INSTITUTE AT MIAMI-DADE JUNIOR COLLEGE, JULY 10-28, 1967, ARE PRESENTED. THE EXERCISES, TO BE PROGRAMED FOR EXECUTION ON THE IBM SYSTEM 1620 WITH AN ON-LINE 1627 PLOTTER, PROVIDE A MEDIUM FOR COVERING AND ENFORCING THE SUBJECT MATERIAL. ALSO INCLUDED ARE (1)…

  17. National Occupational Skill Standards. CADD: Computer Aided Drafting and Design.

    ERIC Educational Resources Information Center

    National Coalition for Advanced Manufacturing, Washington, DC.

    This document identifies computer-aided drafting and design (CADD) skills that companies require of training programs and future employees. The information was developed by two committees of technically knowledgeable CADD users from across the United States and validated by several hundred other CADD users. The skills are aimed at a beginner CADD…

  18. Web-based computer-aided-diagnosis (CAD) system for bone age assessment (BAA) of children

    NASA Astrophysics Data System (ADS)

    Zhang, Aifeng; Uyeda, Joshua; Tsao, Sinchai; Ma, Kevin; Vachon, Linda A.; Liu, Brent J.; Huang, H. K.

    2008-03-01

    Bone age assessment (BAA) of children is a clinical procedure frequently performed in pediatric radiology to evaluate the stage of skeletal maturation based on a left hand and wrist radiograph. The most commonly used standard: Greulich and Pyle (G&P) Hand Atlas was developed 50 years ago and exclusively based on Caucasian population. Moreover, inter- & intra-observer discrepancies using this method create a need of an objective and automatic BAA method. A digital hand atlas (DHA) has been collected with 1,400 hand images of normal children from Asian, African American, Caucasian and Hispanic descends. Based on DHA, a fully automatic, objective computer-aided-diagnosis (CAD) method was developed and it was adapted to specific population. To bring DHA and CAD method to the clinical environment as a useful tool in assisting radiologist to achieve higher accuracy in BAA, a web-based system with direct connection to a clinical site is designed as a novel clinical implementation approach for online and real time BAA. The core of the system, a CAD server receives the image from clinical site, processes it by the CAD method and finally, generates report. A web service publishes the results and radiologists at the clinical site can review it online within minutes. This prototype can be easily extended to multiple clinical sites and will provide the foundation for broader use of the CAD system for BAA.

  19. An Analysis of Computer Aided Design (CAD) Packages Used at MSFC for the Recent Initiative to Integrate Engineering Activities

    NASA Technical Reports Server (NTRS)

    Smith, Leigh M.; Parker, Nelson C. (Technical Monitor)

    2002-01-01

    This paper analyzes the use of Computer Aided Design (CAD) packages at NASA's Marshall Space Flight Center (MSFC). It examines the effectiveness of recent efforts to standardize CAD practices across MSFC engineering activities. An assessment of the roles played by management, designers, analysts, and manufacturers in this initiative will be explored. Finally, solutions are presented for better integration of CAD across MSFC in the future.

  20. Performance evaluation of computer aided diagnostic tool (CAD) for detection of ultrasonic based liver disease.

    PubMed

    Sriraam, N; Roopa, J; Saranya, M; Dhanalakshmi, M

    2009-08-01

    Recent advances in digital imaging technology have greatly enhanced the interpretation of critical/pathology conditions from the 2-dimensional medical images. This has become realistic due to the existence of the computer aided diagnostic tool. A computer aided diagnostic (CAD) tool generally possesses components like preprocessing, identification/selection of region of interest, extraction of typical features and finally an efficient classification system. This paper enumerates on development of CAD tool for classification of chronic liver disease through the 2-D image acquired from ultrasonic device. Characterization of tissue through qualitative treatment leads to the detection of abnormality which is not viable through qualitative visual inspection by the radiologist. Common liver diseases are the indicators of changes in tissue elasticity. One can show the detection of normal, fatty or malignant condition based on the application of CAD tool thereby, further investigation required by radiologist can be avoided. The proposed work involves an optimal block analysis (64 x 64) of the liver image of actual size 256 x 256 by incorporating Gabor wavelet transform which does the texture classification through automated mode. Statistical features such as gray level mean as well as variance values are estimated after this preprocessing mode. A non-linear back propagation neural network (BPNN) is applied for classifying the normal (vs) fatty and normal (vs) malignant liver which yields a classification accuracy of 96.8%. Further multi classification is also performed and a classification accuracy of 94% is obtained. It can be concluded that the proposed CAD can be used as an expert system to aid the automated diagnosis of liver diseases. PMID:19697693

  1. Computer-aided detection (CAD) of breast masses in mammography: combined detection and ensemble classification

    NASA Astrophysics Data System (ADS)

    Choi, Jae Young; Kim, Dae Hoe; Plataniotis, Konstantinos N.; Ro, Yong Man

    2014-07-01

    We propose a novel computer-aided detection (CAD) framework of breast masses in mammography. To increase detection sensitivity for various types of mammographic masses, we propose the combined use of different detection algorithms. In particular, we develop a region-of-interest combination mechanism that integrates detection information gained from unsupervised and supervised detection algorithms. Also, to significantly reduce the number of false-positive (FP) detections, the new ensemble classification algorithm is developed. Extensive experiments have been conducted on a benchmark mammogram database. Results show that our combined detection approach can considerably improve the detection sensitivity with a small loss of FP rate, compared to representative detection algorithms previously developed for mammographic CAD systems. The proposed ensemble classification solution also has a dramatic impact on the reduction of FP detections; as much as 70% (from 15 to 4.5 per image) at only cost of 4.6% sensitivity loss (from 90.0% to 85.4%). Moreover, our proposed CAD method performs as well or better (70.7% and 80.0% per 1.5 and 3.5 FPs per image respectively) than the results of mammography CAD algorithms previously reported in the literature.

  2. Computer-aided detection (CAD) of breast masses in mammography: combined detection and ensemble classification.

    PubMed

    Choi, Jae Young; Kim, Dae Hoe; Plataniotis, Konstantinos N; Ro, Yong Man

    2014-07-21

    We propose a novel computer-aided detection (CAD) framework of breast masses in mammography. To increase detection sensitivity for various types of mammographic masses, we propose the combined use of different detection algorithms. In particular, we develop a region-of-interest combination mechanism that integrates detection information gained from unsupervised and supervised detection algorithms. Also, to significantly reduce the number of false-positive (FP) detections, the new ensemble classification algorithm is developed. Extensive experiments have been conducted on a benchmark mammogram database. Results show that our combined detection approach can considerably improve the detection sensitivity with a small loss of FP rate, compared to representative detection algorithms previously developed for mammographic CAD systems. The proposed ensemble classification solution also has a dramatic impact on the reduction of FP detections; as much as 70% (from 15 to 4.5 per image) at only cost of 4.6% sensitivity loss (from 90.0% to 85.4%). Moreover, our proposed CAD method performs as well or better (70.7% and 80.0% per 1.5 and 3.5 FPs per image respectively) than the results of mammography CAD algorithms previously reported in the literature. PMID:24923292

  3. Computer Aided Detection (CAD) Systems for Mammography and the Use of GRID in Medicine

    NASA Astrophysics Data System (ADS)

    Lauria, Adele

    It is well known that the most effective way to defeat breast cancer is early detection, as surgery and medical therapies are more efficient when the disease is diagnosed at an early stage. The principal diagnostic technique for breast cancer detection is X-ray mammography. Screening programs have been introduced in many European countries to invite women to have periodic radiological breast examinations. In such screenings, radiologists are often required to examine large numbers of mammograms with a double reading, that is, two radiologists examine the images independently and then compare their results. In this way an increment in sensitivity (the rate of correctly identified images with a lesion) of up to 15% is obtained.1,2 In most radiological centres, it is a rarity to find two radiologists to examine each report. In recent years different Computer Aided Detection (CAD) systems have been developed as a support to radiologists working in mammography: one may hope that the "second opinion" provided by CAD might represent a lower cost alternative to improve the diagnosis. At present, four CAD systems have obtained the FDA approval in the USA. † Studies3,4 show an increment in sensitivity when CAD systems are used. Freer and Ulissey in 2001 5 demonstrated that the use of a commercial CAD system (ImageChecker M1000, R2 Technology) increases the number of cancers detected up to 19.5% with little increment in recall rate. Ciatto et al.,5 in a study simulating a double reading with a commercial CAD system (SecondLook‡), showed a moderate increment in sensitivity while reducing specificity (the rate of correctly identified images without a lesion). Notwithstanding these optimistic results, there is an ongoing debate to define the advantages of the use of CAD as second reader: the main limits underlined, e.g., by Nishikawa6 are that retrospective studies are considered much too optimistic and that clinical studies must be performed to demonstrate a statistically

  4. Task analysis for computer-aided design (CAD) at a keystroke level.

    PubMed

    Chi, C F; Chung, K L

    1996-08-01

    The purpose of this research was to develop a new model to describe and predict a computerized task. AutoCAD was utilized as the experimental tool to collect operating procedure and time data at a keystroke level for a computer aided design (CAD) task. Six undergraduate students participated in the experiment. They were required to complete one simple and one complex engineering drawing. A model which characterized the task performance by software commands and predicted task execution time using keystroke-level model operators was proposed and applied to the analysis of the dialogue data. This task parameter model adopted software commands, e.g. LINE, OFFSET in AutoCAD, to describe the function of a task unit and used up to five parameters to indicate the number of keystrokes, chosen function for a command and ways of starting and ending a command. Each task unit in the task parameter model can be replaced by a number of primitive operators as in the keystroke level model to predict the task execution time. The observed task execution times of all task units were found to be highly correlated with the task execution times predicted by the keystroke level model. Therefore, the task parameter model was proved to be a usable analytical tool for evaluating the human-computer interface (HCI). PMID:15677066

  5. Computer-Aided Diagnostic (CAD) Scheme by Use of Contralateral Subtraction Technique

    NASA Astrophysics Data System (ADS)

    Nagashima, Hiroyuki; Harakawa, Tetsumi

    We developed a computer-aided diagnostic (CAD) scheme for detection of subtle image findings of acute cerebral infarction in brain computed tomography (CT) by using a contralateral subtraction technique. In our computerized scheme, the lateral inclination of image was first corrected automatically by rotating and shifting. The contralateral subtraction image was then derived by subtraction of reversed image from original image. Initial candidates for acute cerebral infarctions were identified using the multiple-thresholding and image filtering techniques. As the 1st step for removing false positive candidates, fourteen image features were extracted in each of the initial candidates. Halfway candidates were detected by applying the rule-based test with these image features. At the 2nd step, five image features were extracted using the overlapping scale with halfway candidates in interest slice and upper/lower slice image. Finally, acute cerebral infarction candidates were detected by applying the rule-based test with five image features. The sensitivity in the detection for 74 training cases was 97.4% with 3.7 false positives per image. The performance of CAD scheme for 44 testing cases had an approximate result to training cases. Our CAD scheme using the contralateral subtraction technique can reveal suspected image findings of acute cerebral infarctions in CT images.

  6. Train effectively for CAD/D

    SciTech Connect

    Not Available

    1983-04-01

    After failing with an unstructured computer-aided drafting/ design CAD/D program, Bechtel changed to a structured training program. Five considerations are presented here: teach CAD/D to engineers, not engineering to CAD/D experts; keep the program flexible enough to avoid rewriting due to fast technology evolution; pace information delivery; and rote learning of sequences only works if the students have a conceptual model first. On the job training is necessary, and better monitoring systems to test the OJT are needed. One such test is presented.

  7. Computer-Aided Design/Manufacturing (CAD/M) for high-speed interconnect

    NASA Astrophysics Data System (ADS)

    Santoski, N. F.

    1981-10-01

    The objective of the Computer-Aided Design/Manufacturing (CAD/M) for High-Speed Interconnect Program study was to assess techniques for design, analysis and fabrication of interconnect structures between high-speed logic ICs that are clocked in the 200 MHz to 5 GHz range. Interconnect structure models were investigated and integrated with existing device models. Design rules for interconnects were developed in terms of parameters that can be installed in software that is used for the design, analysis and fabrication of circuits. To implement these design rules in future software development, algorithms and software development techniques were defined. Major emphasis was on Printed Wiring Board and hybrid level circuits as opposed to monolithic chips. Various packaging schemes were considered, including controlled impedance lines in the 50 to 200 ohms range where needed. The design rules developed are generic in nature, in that various architecture classes and device technologies were considered.

  8. Computer Use and CAD in Assisting Schools in the Creation of Facilities.

    ERIC Educational Resources Information Center

    Beach, Robert H.; Essex, Nathan

    1987-01-01

    Computer-aided design (CAD) programs are powerful drafting tools, but are also able to assist with many other facility planning functions. Describes the hardware, software, and the learning process that led to understanding the CAD software at the University of Alabama. (MLF)

  9. Teaching Drafting 101: What Comes First?

    ERIC Educational Resources Information Center

    Carkhuff, Don

    2006-01-01

    Employers require pristine drawings that convey clarity and precision for the production of goods. Can a change in sequence of instruction be expeditious and help teachers better prepare their students for the workplace? Research suggests that combining traditional drafting and computer-aided drafting (CAD) instruction makes sense. It is analogous…

  10. Using Claris CAD To Develop a Floor Plan. High-Technology Training Module.

    ERIC Educational Resources Information Center

    Pawlowicz, Bruce; Johnson, Tom

    This learning module for a high school architectural drafting course introduces students to the use of Claris CAD (Computer Aided Drafting) to develop a floor plan. The six sections of the module are the following: module objectives, content outline, teaching methods, student activities, resource list, and evaluation (pretest, posttest). Student…

  11. Use of computer aided drafting for analysis and control of posture in manual work.

    PubMed

    Ulin, S S; Armstrong, T J; Radwin, R G

    1990-06-01

    Computer aided design (CAD) in conjunction with digitised anthropometric manikins can be used for analysis and control of stressful work postures, one of the most frequently cited occupational risk factors of upper extremity cumulative trauma disorders. This paper describes the use of macros for manipulating manikins and workstation components and for designing the workplace. AutoCAD, a popular computer aided design software package, was used to demonstrate the feasibility of these concepts. Specifically, macros are used for drawing work equipment using parametric designs, manipulating manikins and analysing jobs. In comparing the macros to the use of primitive CAD commands, the macros not only decrease the amount of time needed to create workstation components, but they also make the task easier for the user and decrease the risk of errors. Despite the limitation of anthropometric data and manikins, CAD is an effective method for identifying postural stresses and redesigning the workstation to control the identified stresses. PMID:15676770

  12. A computer-aided detection (CAD) system with a 3D algorithm for small acute intracranial hemorrhage

    NASA Astrophysics Data System (ADS)

    Wang, Ximing; Fernandez, James; Deshpande, Ruchi; Lee, Joon K.; Chan, Tao; Liu, Brent

    2012-02-01

    Acute Intracranial hemorrhage (AIH) requires urgent diagnosis in the emergency setting to mitigate eventual sequelae. However, experienced radiologists may not always be available to make a timely diagnosis. This is especially true for small AIH, defined as lesion smaller than 10 mm in size. A computer-aided detection (CAD) system for the detection of small AIH would facilitate timely diagnosis. A previously developed 2D algorithm shows high false positive rates in the evaluation based on LAC/USC cases, due to the limitation of setting up correct coordinate system for the knowledge-based classification system. To achieve a higher sensitivity and specificity, a new 3D algorithm is developed. The algorithm utilizes a top-hat transformation and dynamic threshold map to detect small AIH lesions. Several key structures of brain are detected and are used to set up a 3D anatomical coordinate system. A rule-based classification of the lesion detected is applied based on the anatomical coordinate system. For convenient evaluation in clinical environment, the CAD module is integrated with a stand-alone system. The CAD is evaluated by small AIH cases and matched normal collected in LAC/USC. The result of 3D CAD and the previous 2D CAD has been compared.

  13. CAD/CAM/CNC.

    ERIC Educational Resources Information Center

    Domermuth, Dave; And Others

    1996-01-01

    Includes "Quick Start CNC (computer numerical control) with a Vacuum Filter and Laminated Plastic" (Domermuth); "School and Industry Cooperate for Mutual Benefit" (Buckler); and "CAD (computer-assisted drafting) Careers--What Professionals Have to Say" (Skinner). (JOW)

  14. Modification to the Monte Carlo N-Particle (MCNP) Visual Editor (MCNPVised) to Read in Computer Aided Design (CAD) Files

    SciTech Connect

    Randolph Schwarz; Leland L. Carter; Alysia Schwarz

    2005-08-23

    Monte Carlo N-Particle Transport Code (MCNP) is the code of choice for doing complex neutron/photon/electron transport calculations for the nuclear industry and research institutions. The Visual Editor for Monte Carlo N-Particle is internationally recognized as the best code for visually creating and graphically displaying input files for MCNP. The work performed in this grant was used to enhance the capabilities of the MCNP Visual Editor to allow it to read in both 2D and 3D Computer Aided Design (CAD) files, allowing the user to electronically generate a valid MCNP input geometry.

  15. Implementation and display of Computer Aided Design (CAD) models in Monte Carlo radiation transport and shielding applications

    SciTech Connect

    Burns, T.J.

    1994-03-01

    An Xwindow application capable of importing geometric information directly from two Computer Aided Design (CAD) based formats for use in radiation transport and shielding analyses is being developed at ORNL. The application permits the user to graphically view the geometric models imported from the two formats for verification and debugging. Previous models, specifically formatted for the radiation transport and shielding codes can also be imported. Required extensions to the existing combinatorial geometry analysis routines are discussed. Examples illustrating the various options and features which will be implemented in the application are presented. The use of the application as a visualization tool for the output of the radiation transport codes is also discussed.

  16. Teaching for CAD Expertise

    ERIC Educational Resources Information Center

    Chester, Ivan

    2007-01-01

    CAD (Computer Aided Design) has now become an integral part of Technology Education. The recent introduction of highly sophisticated, low-cost CAD software and CAM hardware capable of running on desktop computers has accelerated this trend. There is now quite widespread introduction of solid modeling CAD software into secondary schools but how…

  17. CAD in the processing plant environment or managing the CAD revolution

    SciTech Connect

    Woolbert, M.A.; Bennett, R.S.; Haring, W.I.

    1985-10-01

    The author presents a case report on the use of a Computer Aided Design/Computer Aided Drafting (CAD) system. Illustrated is a four-work station system, in addition to which there are two 70 megabyte disk drives, a check plotter and a 24-inch wide electrostatic plotter, a 300 megabyte disk for on-line storage, a tape drive for archive and backup, and a 1-megabyte network process server. It is a distributed logic system. The author states that the CAD system both inexpensive enough and powerful enough for the plant environment is relatively new on the market, made possible by the advent of super microcomputers. Also discussed is the impact the CAD system has had on productivity.

  18. CAD-CAM at Bendix Kansas city: the BICAM system

    SciTech Connect

    Witte, D.R.

    1983-04-01

    Bendix Kansas City Division (BEKC) has been involved in Computer Aided Manufacturing (CAM) technology since the late 1950's when the numerical control (N/C) analysts installed computers to aid in N/C tape preparation for numerically controlled machines. Computer Aided Design (CAD) technology was introduced in 1976, when a number of 2D turnkey drafting stations were procured for printed wiring board (PWB) drawing definition and maintenance. In June, 1980, CAD-CAM Operations was formed to incorporate an integrated CAD-CAM capability into Bendix operations. In March 1982, a ninth division was added to the existing eight divisions at Bendix. Computer Integrated Manufacturing (CIM) is a small organization, reporting directly to the general manager, who has responsibility to coordinate the overall integration of computer aided systems at Bendix. As a long range plan, CIM has adopted a National Bureau of Standards (NBS) architecture titled Factory of the Future. Conceptually, the Bendix CAD-CAM system has a centrally located data base which can be accessed by both CAD and CAM tools, processes, and personnel thus forming an integrated Computer Aided Engineering (CAE) System. This is a key requirement of the Bendix CAD-CAM system that will be presented in more detail.

  19. The state of PC-based CADD (computer-aided design and drafting) systems

    SciTech Connect

    Brandt, G.L.; Bowers, J.M.; Gorman, T.S.; Taylor, L.E.

    1988-07-11

    This report provides an overview of the state of the art of personal computer (PC)-based computer-aided design and drafting (CADD) systems for mechanical engineering applications. It presents the results of an evaluation performed on seven systems during October 1987 to March 1988 and summarizes the strengths and weaknesses of the systems.

  20. Operation of a computer aided drafting system: improvements, results and hopes

    SciTech Connect

    Millaud, J.; Goulding, F.; Salz, P.; Shimada, K.

    1983-10-01

    A two workstation Computer Aided Drafting system has been in operation since September 1982 at the Lawrence Berkeley Laboratory, Department of Instrument Science and Engineering. Improvements made to the original hardware and software configuration are described. Benefits from this installation are reported and future developments are outlined.

  1. Improving radiation survey data using CADD/CAE (computer-aided design and drafting computer-aided engineering)

    SciTech Connect

    Palau, G.L.; Tarpinian, J.E.

    1987-01-01

    A new application of computer-aided design and drafting (CADD) and computer-aided engineering (CAE) at the Three Mile Island Unit 2 (TMI-2) cleanup is improving the quality of radiation survey data taken in the plant. The use of CADD/CAE-generated survey maps has increased both the accuracy of survey data and the capability to perform analyses with these data. In addition, health physics technician manhours and radiation exposure can be reduced in situations where the CADD/CAE-generated drawings are used for survey mapping.

  2. CAD/CAM (Computer Aided Design/Computer Aided Manufacture). A Brief Guide to Materials in the Library of Congress.

    ERIC Educational Resources Information Center

    Havas, George D.

    This brief guide to materials in the Library of Congress (LC) on computer aided design and/or computer aided manufacturing lists reference materials and other information sources under 13 headings: (1) brief introductions; (2) LC subject headings used for such materials; (3) textbooks; (4) additional titles; (5) glossaries and handbooks; (6)…

  3. Using the Continuum of Design Modelling Techniques to Aid the Development of CAD Modeling Skills in First Year Industrial Design Students

    ERIC Educational Resources Information Center

    Storer, I. J.; Campbell, R. I.

    2012-01-01

    Industrial Designers need to understand and command a number of modelling techniques to communicate their ideas to themselves and others. Verbal explanations, sketches, engineering drawings, computer aided design (CAD) models and physical prototypes are the most commonly used communication techniques. Within design, unlike some disciplines,…

  4. Using a computer-aided drafting system to aid in engineering and fabrication

    NASA Astrophysics Data System (ADS)

    Millaud, J.; Goulding, F.; Salz, P.

    1985-05-01

    The generation of schematics and artwork on CAD workstations yields a large amount of numeric data that can be used in many ways. Standard by-products are connection lists, photoplot files and drill files. Using open-ended software allows for more information to be retrieved and used for various purposes in engineering and fabrication.

  5. Classroom Experiences in an Engineering Design Graphics Course with a CAD/CAM Extension.

    ERIC Educational Resources Information Center

    Barr, Ronald E.; Juricic, Davor

    1997-01-01

    Reports on the development of a new CAD/CAM laboratory experience for an Engineering Design Graphics (EDG) course. The EDG curriculum included freehand sketching, introduction to Computer-Aided Design and Drafting (CADD), and emphasized 3-D solid modeling. Reviews the project and reports on the testing of the new laboratory components which were…

  6. Improvement of MS (multiple sclerosis) CAD (computer aided diagnosis) performance using C/C++ and computing engine in the graphical processing unit (GPU)

    NASA Astrophysics Data System (ADS)

    Suh, Joohyung; Ma, Kevin; Le, Anh

    2011-03-01

    Multiple Sclerosis (MS) is a disease which is caused by damaged myelin around axons of the brain and spinal cord. Currently, MR Imaging is used for diagnosis, but it is very highly variable and time-consuming since the lesion detection and estimation of lesion volume are performed manually. For this reason, we developed a CAD (Computer Aided Diagnosis) system which would assist segmentation of MS to facilitate physician's diagnosis. The MS CAD system utilizes K-NN (k-nearest neighbor) algorithm to detect and segment the lesion volume in an area based on the voxel. The prototype MS CAD system was developed under the MATLAB environment. Currently, the MS CAD system consumes a huge amount of time to process data. In this paper we will present the development of a second version of MS CAD system which has been converted into C/C++ in order to take advantage of the GPU (Graphical Processing Unit) which will provide parallel computation. With the realization of C/C++ and utilizing the GPU, we expect to cut running time drastically. The paper investigates the conversion from MATLAB to C/C++ and the utilization of a high-end GPU for parallel computing of data to improve algorithm performance of MS CAD.

  7. Computer-aided design and drafting visualization of anatomical structure of the human eye and orbit

    NASA Astrophysics Data System (ADS)

    Parshall, Robert F.; Sadler, Lewis L.

    1991-04-01

    A generalized " anatomically standard" eyeball was geometrically modeled on a Computer-Aided Design and Drafting (CADD) workstation based on published conceptual norms of dimension radii of curvature alignments etc. An orbital environment for this model was concurrently prepared by serial section reconstruction of a cadaver specimen. Issues addressed include orienting unregistered sections the utility of interactive CADDsupported visual logic in interpretive decision making and the value of geometric models.

  8. Leadless chip carrier packaging and CAD/CAM (Computer-Aided Design/Computer-Aided Manufacturing) supported wire wrap interconnect technology for subnanosecond ECL (Emitter Coupled Logic)

    NASA Astrophysics Data System (ADS)

    Gilbert, B. K.

    1982-12-01

    This document is the third year interim report for a four-year program to refine and develop Computer-Aided Design protocols for implementation of subnanosceond Emitter Coupled Logic in High-Speed Computer Modules using a wire wrap interconnection medium. The software and user manual for implementation guides are not part of the actual report. This report describes the results of work conducted in the third year of a four year program to develop rapid methods for designing and prototyping high-speed digital processor systems using subnanosecond emitter coupled logic (ECL). The third year effort was divided into two separate sets of tasks. In Task 1, described in Sections 3 - 7 of this report, we have nearly completed development of new sets of design rules, interconnection protocols, special components, and logic panels, for a technology based upon specially designed leadless ceramic chip carriers developed at Mayo Foundation. Task 2, described in Sections 8 and IX of this report, continued the development of a comprehensive computer-aided design/computer-aided manufacturing (CAD/CAM) software package which is specifically tailored to support the peculiar design requirements of processors operating in a high clock rate, transmission line environment, either with subnanosecond ECL components or with any other families of subnanosecond devices.

  9. Gathering Empirical Evidence Concerning Links between Computer Aided Design (CAD) and Creativity

    ERIC Educational Resources Information Center

    Musta'amal, Aede Hatib; Norman, Eddie; Hodgson, Tony

    2009-01-01

    Discussion is often reported concerning potential links between computer-aided designing and creativity, but there is a lack of systematic enquiry to gather empirical evidence concerning such links. This paper reports an indication of findings from other research studies carried out in contexts beyond general education that have sought evidence…

  10. Getting into CAD at the Savannah River Plant

    SciTech Connect

    Scoggins, W.R.

    1984-01-01

    In 1978, the Savannah River Plant (SRP) Project Department was producing approximately 1100 new drawings and 3000 revisions per year, with a force of 30 draftsmen. Design services for the Plant were increasing due to changing programs, obsolescent equipment replacements and added security requirements. This increasing workload greatly increased the engineering drafting backlog. At the same time, many draftsmen were approaching retirement age and were to be replaced with unskilled draftsman trainees. A proposal was presented to management to acquire a Computer Aided Drafting (CAD) system to produce instrument and electrical drawings which comprised 30% of the work load.

  11. Development of problem-oriented software packages for numerical studies and computer-aided design (CAD) of gyrotrons

    NASA Astrophysics Data System (ADS)

    Damyanova, M.; Sabchevski, S.; Zhelyazkov, I.; Vasileva, E.; Balabanova, E.; Dankov, P.; Malinov, P.

    2016-03-01

    Gyrotrons are the most powerful sources of coherent CW (continuous wave) radiation in the frequency range situated between the long-wavelength edge of the infrared light (far-infrared region) and the microwaves, i.e., in the region of the electromagnetic spectrum which is usually called the THz-gap (or T-gap), since the output power of other devices (e.g., solid-state oscillators) operating in this interval is by several orders of magnitude lower. In the recent years, the unique capabilities of the sub-THz and THz gyrotrons have opened the road to many novel and future prospective applications in various physical studies and advanced high-power terahertz technologies. In this paper, we present the current status and functionality of the problem-oriented software packages (most notably GYROSIM and GYREOSS) used for numerical studies, computer-aided design (CAD) and optimization of gyrotrons for diverse applications. They consist of a hierarchy of codes specialized to modelling and simulation of different subsystems of the gyrotrons (EOS, resonant cavity, etc.) and are based on adequate physical models, efficient numerical methods and algorithms.

  12. An Investigation into Computer Aided Drafting and Design (CADD) in the Saginaw Area from the Viewpoint of Mechanical Drafting and Design Employers.

    ERIC Educational Resources Information Center

    Irwin, John L.

    The extent to which computer-aided drafting and design (CADD) was being used in local businesses in Saginaw, Michigan, was investigated. Focuses of a literature review were types of CADD systems, categories of CADD users, and the symbiotic relationship between industry and education in providing CADD training. The survey questionnaire was…

  13. Comparison of Conventional and Computer-Aided Drafting Methods from the View of Time and Drafting Quality

    ERIC Educational Resources Information Center

    Ozkan, Aysen; Yildirim, Kemal

    2016-01-01

    Problem Statement: Drafting course is essential for students in the design disciplines for becoming more organized and for complying with standards in the educational system. Drafting knowledge is crucial, both for comprehension of the issues and for the implementation phase. In any design project, drafting performance and success are as important…

  14. Role of Computer Aided Diagnosis (CAD) in the detection of pulmonary nodules on 64 row multi detector computed tomography

    PubMed Central

    Prakashini, K; Babu, Satish; Rajgopal, KV; Kokila, K Raja

    2016-01-01

    Aims and Objectives: To determine the overall performance of an existing CAD algorithm with thin-section computed tomography (CT) in the detection of pulmonary nodules and to evaluate detection sensitivity at a varying range of nodule density, size, and location. Materials and Methods: A cross-sectional prospective study was conducted on 20 patients with 322 suspected nodules who underwent diagnostic chest imaging using 64-row multi-detector CT. The examinations were evaluated on reconstructed images of 1.4 mm thickness and 0.7 mm interval. Detection of pulmonary nodules, initially by a radiologist of 2 years experience (RAD) and later by CAD lung nodule software was assessed. Then, CAD nodule candidates were accepted or rejected accordingly. Detected nodules were classified based on their size, density, and location. The performance of the RAD and CAD system was compared with the gold standard that is true nodules confirmed by consensus of senior RAD and CAD together. The overall sensitivity and false-positive (FP) rate of CAD software was calculated. Observations and Results: Of the 322 suspected nodules, 221 were classified as true nodules on the consensus of senior RAD and CAD together. Of the true nodules, the RAD detected 206 (93.2%) and 202 (91.4%) by the CAD. CAD and RAD together picked up more number of nodules than either CAD or RAD alone. Overall sensitivity for nodule detection with the CAD program was 91.4%, and FP detection per patient was 5.5%. The CAD showed comparatively higher sensitivity for nodules of size 4–10 mm (93.4%) and nodules in hilar (100%) and central (96.5%) location when compared to RAD's performance. Conclusion: CAD performance was high in detecting pulmonary nodules including the small size and low-density nodules. CAD even with relatively high FP rate, assists and improves RAD's performance as a second reader, especially for nodules located in the central and hilar region and for small nodules by saving RADs time.

  15. The VE/CAD synergism

    SciTech Connect

    Sperling, R.B.

    1993-03-19

    Value Engineering (VE) and Computer-Aided Design (CAD) can be used synergistically to reduce costs and improve facilities designs. The cost and schedule impacts of implementing alternative design ideas developed by VE teams can be greatly reduced when the drawings have been produced with interactive CAD systems. To better understand the interrelationship between VE and CAD, the fundamentals of the VE process are explained; and example of a VE proposal is described and the way CAD drawings facilitated its implementation is illustrated.

  16. Evaluation of computer-aided design and drafting for the electric power industry. Final report

    SciTech Connect

    Anuskiewicz, T.; Barduhn, G.; Lowther, B.; Osman, I.

    1984-01-01

    This report reviews current and future computer-aided design and drafting (CADD) technology relative to utility needs and to identify useful development projects that may be undertaken by EPRI. The principal conclusions are that computer aids offer substantial cost and time savings and that computer systems are being developed to take advantage of the savings. Data bases are not available for direct communication between computers used by the power industry and will limit benefits to the industry. Recommendations are made for EPRI to take the initiative to develop the data bases for direct communication between power industry computers and to research, develop, and demonstrate new applications within the industry. Key components of a CADD system are described. The state of the art of two- and three-dimensional CADD systems to perform graphics and project management control functions are assessed. Comparison is made of three-dimensional electronic models and plastic models.

  17. CAD/CAE Integration Enhanced by New CAD Services Standard

    NASA Technical Reports Server (NTRS)

    Claus, Russell W.

    2002-01-01

    A Government-industry team led by the NASA Glenn Research Center has developed a computer interface standard for accessing data from computer-aided design (CAD) systems. The Object Management Group, an international computer standards organization, has adopted this CAD services standard. The new standard allows software (e.g., computer-aided engineering (CAE) and computer-aided manufacturing software to access multiple CAD systems through one programming interface. The interface is built on top of a distributed computing system called the Common Object Request Broker Architecture (CORBA). CORBA allows the CAD services software to operate in a distributed, heterogeneous computing environment.

  18. CAD programs: a tool for crime scene processing and reconstruction

    NASA Astrophysics Data System (ADS)

    Boggiano, Daniel; De Forest, Peter R.; Sheehan, Francis X.

    1997-02-01

    Computer aided drafting (CAD) programs have great potential for helping the forensic scientist. One of their most direct and useful applications is crime scene documentation, as an aid in rendering neat, unambiguous line drawings of crime scenes. Once the data has been entered, it can easily be displayed, printed, or plotted in a variety of formats. Final renditions from this initial data entry can take multiple forms and can have multiple uses. As a demonstrative aid, a CAD program can produce two dimensional (2-D) drawings of the scene from one's notes to scale. These 2-D renditions are court display quality and help to make the forensic scientists's testimony easily understood. Another use for CAD is as an analytical tool for scene reconstruction. More than just a drawing aid, CAD can generate useful information from the data input. It can help reconstruct bullet paths or locations of furniture in a room when it is critical to the reconstruction. Data entry at the scene, on a notebook computer, can assist in framing and answering questions so that the forensic scientist can test hypotheses while actively documenting the scene. Further, three dimensional (3-D) renditions of items can be viewed from many 'locations' by using the program to rotate the object and the observers' viewpoint.

  19. Evaluation of Five Microcomputer CAD Packages.

    ERIC Educational Resources Information Center

    Leach, James A.

    1987-01-01

    Discusses the similarities, differences, advanced features, applications and number of users of five microcomputer computer-aided design (CAD) packages. Included are: "AutoCAD (V.2.17)"; "CADKEY (V.2.0)"; "CADVANCE (V.1.0)"; "Super MicroCAD"; and "VersaCAD Advanced (V.4.00)." Describes the evaluation of the packages and makes recommendations for…

  20. A supervised 'lesion-enhancement' filter by use of a massive-training artificial neural network (MTANN) in computer-aided diagnosis (CAD)

    NASA Astrophysics Data System (ADS)

    Suzuki, Kenji

    2009-09-01

    Computer-aided diagnosis (CAD) has been an active area of study in medical image analysis. A filter for the enhancement of lesions plays an important role for improving the sensitivity and specificity in CAD schemes. The filter enhances objects similar to a model employed in the filter; e.g. a blob-enhancement filter based on the Hessian matrix enhances sphere-like objects. Actual lesions, however, often differ from a simple model; e.g. a lung nodule is generally modeled as a solid sphere, but there are nodules of various shapes and with internal inhomogeneities such as a nodule with spiculations and ground-glass opacity. Thus, conventional filters often fail to enhance actual lesions. Our purpose in this study was to develop a supervised filter for the enhancement of actual lesions (as opposed to a lesion model) by use of a massive-training artificial neural network (MTANN) in a CAD scheme for detection of lung nodules in CT. The MTANN filter was trained with actual nodules in CT images to enhance actual patterns of nodules. By use of the MTANN filter, the sensitivity and specificity of our CAD scheme were improved substantially. With a database of 69 lung cancers, nodule candidate detection by the MTANN filter achieved a 97% sensitivity with 6.7 false positives (FPs) per section, whereas nodule candidate detection by a difference-image technique achieved a 96% sensitivity with 19.3 FPs per section. Classification-MTANNs were applied for further reduction of the FPs. The classification-MTANNs removed 60% of the FPs with a loss of one true positive; thus, it achieved a 96% sensitivity with 2.7 FPs per section. Overall, with our CAD scheme based on the MTANN filter and classification-MTANNs, an 84% sensitivity with 0.5 FPs per section was achieved. First presented at the Seventh International Conference on Machine Learning and Applications, San Diego, CA, USA, 11-13 December 2008.

  1. Impact of computer-aided design and drafting on operator perceptions and performance intentions

    SciTech Connect

    Mandeville, D.E.

    1987-01-01

    The goal of the introduction of computer-aided design and drafting (CADD) technology is to improve engineering quantity and quality outcomes. What is not so obvious is that the manner in which the operator views the CADD job may affect these outcomes. The study found that: (1) the subjects hold job characteristic beliefs about their jobs that are similar to those held by individuals in related professional and technical positions in other organizations; (2) subjects in routine jobs who had little experience with CADD believe that the characteristics of the job with CADD will be less desirable than there present job utilizing manual drafting; however, experienced users believe that there is little difference; (3) the subjects performing technologically routine jobs indicate that quantity and quality of their jobs decreases with CADD, while holders of technologically nonroutine jobs indicate the opposite; (4) significant but weak relationships existed between job characteristic beliefs, attitudes, and job intentions; however, the model relationships and strengths varied when subgroups were analyzed; and (5) the correlation of social referent group beliefs with subject beliefs are significant but weak.

  2. Facility management of computer-aided design, drafting/manufacturing systems (CADD/M)

    SciTech Connect

    Norton, F.J.

    1980-09-23

    Interactive Computer-Aided Design Drafting/Manufacturing systems have been installed in thousands of companies, applying CADD/M capabilities to many applications. This has been done with varying degrees of success even among companies with identical applications. Investigation of individual companies reveals a gap between the capabilities of CADD/M systems and the actual usage by industry of those capabilities. This company usage often determines the degree of success or failure of an interactive graphics facility and is largely controlled by management. The responsibilities of the interactive graphics facility managemant team are explained in detail. Proper management of a CADD/M facility is more critical to the success or failure of the facility than any other factor.

  3. Cost justification for an interactive Computer-Aided Design Drafting/Manufacturing system

    SciTech Connect

    Norton, F.J.

    1980-09-23

    Many factors influence the capital investment decision. System costs and benefits are weighed by methods of financial analysis to determine the advisability of an investment. Capital, expense, and benefits as related to Interactive Computer-Aided Design Drafting/Manufacturing (CADD/M) Systems are discussed and model calculations are included. An example is treated by the simple payback method and the more sophisticated methods of Net Present Value (NPV) and Internal Rate of Return (IRR). The NPV and IRR approaches include in the calculation the time value of money and provide a sounder foundation on which to base the purchase decision. It is hoped that an understanding of these techniques by technical personnel will make an optimum system purchase more likely.

  4. CAD for small hydro projects

    SciTech Connect

    Bishop, N.A. Jr. )

    1994-04-01

    Over the past decade, computer-aided design (CAD) has become a practical and economical design tool. Today, specifying CAD hardware and software is relatively easy once you know what the design requirements are. But finding experienced CAD professionals is often more difficult. Most CAD users have only two or three years of design experience; more experienced design personnel are frequently not CAD literate. However, effective use of CAD can be the key to lowering design costs and improving design quality--a quest familiar to every manager and designer. By emphasizing computer-aided design literacy at all levels of the firm, a Canadian joint-venture company that specializes in engineering small hydroelectric projects has cut costs, become more productive and improved design quality. This article describes how they did it.

  5. Selecting and implementing an interactive Computer Aided Design Drafting/Manufacturing (CADD/M) system

    SciTech Connect

    Norton, F.J.

    1980-09-23

    Success with Interactive Computer-Aided Design Drafting/Manufacturing (CADD/M) depends upon management, users, and the system itself. If you are in a design and drafting environment, the thought of acquiring a CADD/M system will probably occur to you sometime in the very near future - if it hasn't already. Convincing yourself and your management of the benefits of such systems is but the first step. Evaluating and selecting one particular type of CADD/M system can turn out to be a complicated undertaking - not to mention somewhat frustrating. Procedures for selecting and successfully implementing a CADD/M system are outlined. INITIAL PREPARATION examines the techniques used to evaluate CADD/M systems including formation of an evaluation team, and application analysis. GRAPHICS EVALUATION describes the methods that can be used to test a CADD/M system, including benchmark drawings and specifications, human engineering considerations, and other evaluation criteria and general system configurations are also discussed. COMPUTER SYSTEM EVALUATION examines other factors in systems selection: programming, communications, documentation, and service. SYSTEM STARTUP addresses site preparation, people preparation, system acceptance, and operator, designer/drafter selection. Finally, operator, designer/drafter TRAINING and SYSTEM MANAGEMENT are discussed. This systematic approach wil help those contemplating the acquisition of CADD/M systems for their activities and will help minimize unplanned events and problem areas.Advanced planning in these areas is needed to ensure successful implementation of a CADD/M system. This in turn will lead to considerable cost savings and schedule improvements for an entire project, from initial design to final production. These are ambitious goals but easily realized if a logical and rational plan is adopted in the same manner as that used in a typical development program.

  6. Impact of image normalization and quantization on the performance of sonar computer-aided detection/computer-aided classification (CAD/CAC) algorithms

    NASA Astrophysics Data System (ADS)

    Ciany, Charles M.; Zurawski, William C.

    2007-04-01

    Raytheon has extensively processed high-resolution sonar images with its CAD/CAC algorithms to provide real-time classification of mine-like bottom objects in a wide range of shallow-water environments. The algorithm performance is measured in terms of probability of correct classification (Pcc) as a function of false alarm rate, and is impacted by variables associated with both the physics of the problem and the signal processing design choices. Some examples of prominent variables pertaining to the choices of signal processing parameters are image resolution (i.e., pixel dimensions), image normalization scheme, and pixel intensity quantization level (i.e., number of bits used to represent the intensity of each image pixel). Improvements in image resolution associated with the technology transition from sidescan to synthetic aperture sonars have prompted the use of image decimation algorithms to reduce the number of pixels per image that are processed by the CAD/CAC algorithms, in order to meet real-time processor throughput requirements. Additional improvements in digital signal processing hardware have also facilitated the use of an increased quantization level in converting the image data from analog to digital format. This study evaluates modifications to the normalization algorithm and image pixel quantization level within the image processing prior to CAD/CAC processing, and examines their impact on the resulting CAD/CAC algorithm performance. The study utilizes a set of at-sea data from multiple test exercises in varying shallow water environments.

  7. Impact of a computer-aided detection (CAD) system integrated into a picture archiving and communication system (PACS) on reader sensitivity and efficiency for the detection of lung nodules in thoracic CT exams.

    PubMed

    Bogoni, Luca; Ko, Jane P; Alpert, Jeffrey; Anand, Vikram; Fantauzzi, John; Florin, Charles H; Koo, Chi Wan; Mason, Derek; Rom, William; Shiau, Maria; Salganicoff, Marcos; Naidich, David P

    2012-12-01

    The objective of this study is to assess the impact on nodule detection and efficiency using a computer-aided detection (CAD) device seamlessly integrated into a commercially available picture archiving and communication system (PACS). Forty-eight consecutive low-dose thoracic computed tomography studies were retrospectively included from an ongoing multi-institutional screening study. CAD results were sent to PACS as a separate image series for each study. Five fellowship-trained thoracic radiologists interpreted each case first on contiguous 5 mm sections, then evaluated the CAD output series (with CAD marks on corresponding axial sections). The standard of reference was based on three-reader agreement with expert adjudication. The time to interpret CAD marking was automatically recorded. A total of 134 true-positive nodules, measuring 3 mm and larger were included in our study; with 85 ≥ 4 and 50 ≥ 5 mm in size. Readers detection improved significantly in each size category when using CAD, respectively, from 44 to 57 % for ≥3 mm, 48 to 61 % for ≥4 mm, and 44 to 60 % for ≥5 mm. CAD stand-alone sensitivity was 65, 68, and 66 % for nodules ≥3, ≥4, and ≥5 mm, respectively, with CAD significantly increasing the false positives for two readers only. The average time to interpret and annotate a CAD mark was 15.1 s, after localizing it in the original image series. The integration of CAD into PACS increases reader sensitivity with minimal impact on interpretation time and supports such implementation into daily clinical practice. PMID:22710985

  8. An overview of the computer aided design system for drafting at Sandia National Laboratories, Livermore

    SciTech Connect

    Koopmann, B.E.

    1988-08-01

    Sandia Laboratories Livermore is converting the existing Computervision CADS system to a new hardware and software platform. This report describes the final configuration (after the conversion is completed) and the individual units comparing the system. A background describing the evolution of CADS at SNLL is appended.

  9. Computer-aided design drafting/manufacturing (CADD/M) facility preparation

    SciTech Connect

    Norton, F.J.

    1980-09-23

    Computer-Aided Design, Drafting and Manufacturing (CADD/M) equipment requires careful facilities preparation before installation takes place. This paper presents what a company should consider to ensure a proper installation. This includes consideration of working conditions. To get the most out of the system, the operators must be provided with a relaxed, comfortable environment, free from noise and other distractions. Such things as temperature requirements, lighting, power, security and fire protection are discussed. Also, future expansion needs are considered so that major construction will not be required for future years. Advanced planning in these areas is needed to ensure successful implementation of a CADD/M system. This will lead to considerable cost savings, and in the long run, improve the scheduling for an entire project, from initial design to final production. This careful preparation will minimize unplanned events and problem areas. These are ambitious goals but easily realized if a logical and rational plan is adopted in the same manner as that used in a typical development program.

  10. Use of CADD (Computer Aided Drafting and Design) in a construction setting

    SciTech Connect

    Ketcham, D.L.

    1988-01-01

    At the outset of the design for the Defense Waste Processing Facility (DWPF) it was determined to complete over 70 percent of the more than 7000 drawings on a Computer Aided Drafting and Design (CADD) system. This ambitious goal required the development of an integrated data base for plant design software systems to service a multi-discipline, engineering and management environment for the complex one-of-a-kind mega project. The implementation involved extensive training, special accounting and security provisions to meet QA requirements. It was found to be effective to train engineers as well as operators so that technical personnel could have direct access to the drawing files. This was particularly useful when designing and laying out close tolerance equipment in remotely maintained cells where clearances are critical. It was also beneficial to have the terminals located in the same areas as the engineering staff. Background drawings were maintained by one discipline and used as a reference file by the other disciplines. This reduced the chances of interferences and insured that the latest revisions were in use. 2 figs.

  11. CAD systems simplify engineering drawings

    SciTech Connect

    Holt, J.

    1986-10-01

    Computer assisted drafting systems, with today's technology, provide high-quality, timely drawings that can be justified by the lower costs for the final product. The author describes Exxon Pipeline Co.'s experience in deciding on hardware and software for a CAD system installation and the benefits effected by this procedure and equipment.

  12. Competency Reference for Computer Assisted Drafting.

    ERIC Educational Resources Information Center

    Oregon State Dept. of Education, Salem. Div. of Vocational Technical Education.

    This guide, developed in Oregon, lists competencies essential for students in computer-assisted drafting (CAD). Competencies are organized in eight categories: computer hardware, file usage and manipulation, basic drafting techniques, mechanical drafting, specialty disciplines, three dimensional drawing/design, plotting/printing, and advanced CAD.…

  13. CAD/CAM. High-Technology Training Module.

    ERIC Educational Resources Information Center

    Zuleger, Robert

    This high technology training module is an advanced course on computer-assisted design/computer-assisted manufacturing (CAD/CAM) for grades 11 and 12. This unit, to be used with students in advanced drafting courses, introduces the concept of CAD/CAM. The content outline includes the following seven sections: (1) CAD/CAM software; (2) computer…

  14. Traditional Engineering Graphics versus Computer-Aided Drafting: A View from Academe.

    ERIC Educational Resources Information Center

    Foster, Robert J.

    1987-01-01

    Argues for a legitimate role of manually expressed engineering graphics within engineering education as a needed support for computer-assisted drafting work. Discusses what and how students should learn as well as trends in engineering graphics education. Compares and contrasts manual and computer drafting methods. (CW)

  15. DOE data exchange format specification, mechanical products/drafting: Version 1. 3, CADCAM-045

    SciTech Connect

    Not Available

    1988-01-01

    The Data Exchange Format (DEF) has been developed as part of a Department of Energy (DOE) effort to integrate the Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM) activities throughout the Nuclear Weapons Complex (NWC). A primary objective of this effort is to provide a capability for the exchange of digital data between dissimilar CAD/CAM systems within the NWC. This specification is the result of a collective effort of the DOE Data Exchange Format Group charged with the task of defining a subset of the Initial Graphics Exchange Specification (IGES) to be used as the data exchange format for the mechanical products/drafting application.

  16. DOE data exchange format specification, mechanical products/drafting: Version 1. 2. 2: CADCAM-045

    SciTech Connect

    Not Available

    1987-09-01

    The Data Exchange Format (DEF) has been developed as part of a Department of Energy (DOE) effort to integrate the Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM) activities throughout the Nuclear Weapons Complex (NWC). A primary objective of this effort is to provide a capability for the exchange of digital data between dissimilar CAD/CAM systems within the NWC. This specification is the result of a collective effort of the DOE Data Exchange Format Group charged with the task of defining a subset of the Initial Graphics Exchange Specification (IGES) to be used as the data exchange format for the mechanical products/drafting application.

  17. A Survey of CAD Software.

    ERIC Educational Resources Information Center

    Sisk, Alan

    1987-01-01

    Computer-aided design (CAD) has been around for a number of years. An overview is provided of a number of major computer-aided design programs. A short analysis of each program includes the addresses of the software producers. (MLF)

  18. New results in computer-aided diagnosis (CAD) of breast cancer using a recently developed SVM/GRNN Oracle hybrid

    NASA Astrophysics Data System (ADS)

    Land, Walker H., Jr.; Wong, Lut; McKee, Daniel W.; Masters, Timothy; Anderson, Frances R.; Raturi, Anurag; Lo, Joseph Y.

    2004-05-01

    Breast cancer is second only to lung cancer as a tumor-related cause of death in women. Currently, the method of choice for the early detection of breast cancer is mammography. While sensitive to the detection of non palpable breast lesions, its positive predictive value (PPV) is low, resulting in biopsies that are only 15%-34% likely to reveal malignancy. This paper explores the use of a recently designed Support Vector Machine (SVM)/Generalized Regression Neural Network (GRNN) Oracle hybrid to classify breast lesions and evaluate the software's performance as an interpretive aid to radiologists. The main objective of the research was to perform an independent analysis, using a new, integrated film screen mammogram data base of approximately 2500 cases from five separate institutions, to verify results obtained previously[14]. This study demonstrated the following: (1) The DE crossover constant has little, if any, effect on measures of performance (MOP). (2) A specificity of approximately 5.6% is achieved at 100% sensitivity, which increases to approximately 36% at 95% sensitivity. (3) PPV increases from 51% to 56% as sensitivity is decreased from 100 to 95%, respectively.

  19. Mechanical Design Technology--Modified. (Computer Assisted Drafting, Computer Aided Design). Curriculum Grant 84/85.

    ERIC Educational Resources Information Center

    Schoolcraft Coll., Livonia, MI.

    This document is a curriculum guide for a program in mechanical design technology (computer-assisted drafting and design developed at Schoolcraft College, Livonia, Michigan). The program helps students to acquire the skills of drafters and to interact with electronic equipment, with the option of becoming efficient in the computer-aided…

  20. Improving the radiologist-CAD interaction: designing for appropriate trust.

    PubMed

    Jorritsma, W; Cnossen, F; van Ooijen, P M A

    2015-02-01

    Computer-aided diagnosis (CAD) has great potential to improve radiologists' diagnostic performance. However, the reported performance of the radiologist-CAD team is lower than what might be expected based on the performance of the radiologist and the CAD system in isolation. This indicates that the interaction between radiologists and the CAD system is not optimal. An important factor in the interaction between humans and automated aids (such as CAD) is trust. Suboptimal performance of the human-automation team is often caused by an inappropriate level of trust in the automation. In this review, we examine the role of trust in the radiologist-CAD interaction and suggest ways to improve the output of the CAD system so that it allows radiologists to calibrate their trust in the CAD system more effectively. Observer studies of the CAD systems show that radiologists often have an inappropriate level of trust in the CAD system. They sometimes under-trust CAD, thereby reducing its potential benefits, and sometimes over-trust it, leading to diagnostic errors they would not have made without CAD. Based on the literature on trust in human-automation interaction and the results of CAD observer studies, we have identified four ways to improve the output of CAD so that it allows radiologists to form a more appropriate level of trust in CAD. Designing CAD systems for appropriate trust is important and can improve the performance of the radiologist-CAD team. Future CAD research and development should acknowledge the importance of the radiologist-CAD interaction, and specifically the role of trust therein, in order to create the perfect artificial partner for the radiologist. This review focuses on the role of trust in the radiologist-CAD interaction. The aim of the review is to encourage CAD developers to design for appropriate trust and thereby improve the performance of the radiologist-CAD team. PMID:25459198

  1. AutoCAD-To-NASTRAN Translator Program

    NASA Technical Reports Server (NTRS)

    Jones, A.

    1989-01-01

    Program facilitates creation of finite-element mathematical models from geometric entities. AutoCAD to NASTRAN translator (ACTON) computer program developed to facilitate quick generation of small finite-element mathematical models for use with NASTRAN finite-element modeling program. Reads geometric data of drawing from Data Exchange File (DXF) used in AutoCAD and other PC-based drafting programs. Written in Microsoft Quick-Basic (Version 2.0).

  2. Computer Aided Drafting and Design, Industrial Manufacturing Technician, and Mechanical Engineering Technician and Machine Tool, Die and Moldmaking Technology. Tech Prep Competency Profile.

    ERIC Educational Resources Information Center

    Mid-East Ohio Tech Prep Consortium, Zanesville.

    This document contains competency profiles in four areas: computer-aided drafting and design; industrial manufacturing technician; mechanical engineering technician; and machine tool, die, and moldmaking technology occupations. The profiles are intended for use in articulating tech prep programs from high school through associate degrees in Ohio.…

  3. Computer-Aided Drafting and Design Series. Educational Resources for the Machine Tool Industry, Course Syllabi, [and] Instructor's Handbook. Student Laboratory Manual.

    ERIC Educational Resources Information Center

    Texas State Technical Coll. System, Waco.

    This package consists of course syllabi, an instructor's handbook, and a student laboratory manual for a 2-year vocational training program to prepare students for entry-level employment in computer-aided drafting and design in the machine tool industry. The program was developed through a modification of the DACUM (Developing a Curriculum)…

  4. CAD/CAM systems in machine construction

    NASA Astrophysics Data System (ADS)

    Hellwig, H.-E.; Paulus, M.

    1985-09-01

    A description is provided of the present status of Computer-Aided Design (CAD) and Computer-Aided Manufacturing (CAM) technology, taking into account applications, and risks related to the introduction and employment of CAD/CAM methods. The employment of CAD/CAM systems in the area of machine construction is discussed, giving attention to the situation in West Germany. With respect to the system component 'hardware', the transition to a new hardware generation is taking place. In addition to computer centers with large-scale computers, minicomputers and superminicomputers, designed especially for technical applications, have become available. However, existing CAD software does not yet permit the full exploitation of the changes in hardware technology. Attention is given to CAD potential and current utilization in various application areas, developments related to graphics and geometry, advantages of a suitable macro language, the current employment of CAD/CAM technology, and cost considerations.

  5. Viewing CAD Drawings on the Internet

    ERIC Educational Resources Information Center

    Schwendau, Mark

    2004-01-01

    Computer aided design (CAD) has been producing 3-D models for years. AutoCAD software is frequently used to create sophisticated 3-D models. These CAD files can be exported as 3DS files for import into Autodesk's 3-D Studio Viz. In this program, the user can render and modify the 3-D model before exporting it out as a WRL (world file hyperlinked)…

  6. Computing Mass Properties From AutoCAD

    NASA Technical Reports Server (NTRS)

    Jones, A.

    1990-01-01

    Mass properties of structures computed from data in drawings. AutoCAD to Mass Properties (ACTOMP) computer program developed to facilitate quick calculations of mass properties of structures containing many simple elements in such complex configurations as trusses or sheet-metal containers. Mathematically modeled in AutoCAD or compatible computer-aided design (CAD) system in minutes by use of three-dimensional elements. Written in Microsoft Quick-Basic (Version 2.0).

  7. Use of CAD Geometry in MDO

    NASA Technical Reports Server (NTRS)

    Samareh, Jamshid A.

    1996-01-01

    The purpose of this paper is to discuss the use of Computer-Aided Design (CAD) geometry in a Multi-Disciplinary Design Optimization (MDO) environment. Two techniques are presented to facilitate the use of CAD geometry by different disciplines, such as Computational Fluid Dynamics (CFD) and Computational Structural Mechanics (CSM). One method is to transfer the load from a CFD grid to a CSM grid. The second method is to update the CAD geometry for CSM deflection.

  8. Bendix CAD-CAM site plan

    SciTech Connect

    Smith, M.L.

    1982-12-01

    The Bendix Site Plan for CAD-CAM encompasses the development and integration of interactive graphics systems, factory data management systems, robotics, direct numerical control, automated inspection, factory automation, and shared data bases to achieve significant plant-wide gains in productivity. This plan does not address all current or planned computerization projects within our facility. A summary of planning proposals and rationale is presented in the following paragraphs. Interactive Graphics System (IGS) capability presently consists of two Applicon CAD systems and the CD-2000 software program processing on a time-shared CYBER 174 computer and a dedicated CYBER 173. Proposed plans include phased procurment through FY85 of additional computers and sufficient graphics terminals to support projected needs in drafting, tool/gage design, N/C programming, and process engineering. Planned procurement of additional computer equipment in FY86 and FY87 will provide the capacity necessary for a comprehensive graphics data base management system, computer-aided process planning graphics, and special graphics requirements in facilities and test equipment design. The overall IGS plan, designated BICAM (Bendix Integrated Computer Aided Manufacturing), will provide the capability and capacity to integrate manufacturing activities through a shared product data base and standardized data exchange format. Planned efforts in robotics will result in productive applications of low to medium technology robots beginning in FY82, and extending by FY85 to work cell capabilities utilizing higher technology robots with sensors such as vision and instrumented remote compliance devices. A number of robots are projected to be in service by 1990.

  9. Immersive CAD

    SciTech Connect

    Ames, A.L.

    1999-02-01

    This paper documents development of a capability for performing shape-changing editing operations on solid model representations in an immersive environment. The capability includes part- and assembly-level operations, with part modeling supporting topology-invariant and topology-changing modifications. A discussion of various design considerations in developing an immersive capability is included, along with discussion of a prototype implementation we have developed and explored. The project investigated approaches to providing both topology-invariant and topology-changing editing. A prototype environment was developed to test the approaches and determine the usefulness of immersive editing. The prototype showed exciting potential in redefining the CAD interface. It is fun to use. Editing is much faster and friendlier than traditional feature-based CAD software. The prototype algorithms did not reliably provide a sufficient frame rate for complex geometries, but has provided the necessary roadmap for development of a production capability.

  10. A CAD system based on spherical dual representations

    SciTech Connect

    Roach, J.W.; Paripati, P.K.; Wright, J.S.

    1987-08-01

    Computer-aided design (CAD) systems typically have many different functions: drafting, two-dimensional modeling, three-dimensional modeling, finite element analysis, and fit and tolerancing of parts. The authors report on the construction of a CAD system based on shape representation ideas used in the vision community to determine the shape of an object from its image. In the long term, they propose to construct a combined CAD and sensing system based on the same underlying object models. Considerable advantages follow from building a model-driven sensor fusion system that uses a common geometric model. In a manufacturing environment, for example, a library of objects can be built up and its models used in a vision and touch sensing system integrated into an automated assembly line to discriminate between objects and determine orientation and distance. If such a system could be made robust and highly reliable, then some of the most difficult problems that plague attempts to create a fully flexible automated environment would be solved.

  11. Every Body Needs First Aid... A Manual for LEP Students [Draft] and Teacher Guide.

    ERIC Educational Resources Information Center

    Adachi, Patricia

    The manual contains both student and teacher materials for instruction in basic physiology and first aid. The instructional materials were developed for use with limited-English-proficient high school students, but are suitable for high school first aid classes because of their simplified English and format, sequential organization, detailed table…

  12. Pricing and Financial Aid in American Higher Education: Some Interactions. Preliminary Draft.

    ERIC Educational Resources Information Center

    Deitch, Kenneth M.

    Issues are discussed relating to student financial aid and aid policies in higher education. A review of the economic outlook for higher education in the near future is given, with attention to enrollment trends, rising costs, and age distribution for faculty for 1972 and projected for 1990. Competition for students is discussed. The current…

  13. CAD Services: an Industry Standard Interface for Mechanical CAD Interoperability

    NASA Technical Reports Server (NTRS)

    Claus, Russell; Weitzer, Ilan

    2002-01-01

    Most organizations seek to design and develop new products in increasingly shorter time periods. At the same time, increased performance demands require a team-based multidisciplinary design process that may span several organizations. One approach to meet these demands is to use 'Geometry Centric' design. In this approach, design engineers team their efforts through one united representation of the design that is usually captured in a CAD system. Standards-based interfaces are critical to provide uniform, simple, distributed services that enable the 'Geometry Centric' design approach. This paper describes an industry-wide effort, under the Object Management Group's (OMG) Manufacturing Domain Task Force, to define interfaces that enable the interoperability of CAD, Computer Aided Manufacturing (CAM), and Computer Aided Engineering (CAE) tools. This critical link to enable 'Geometry Centric' design is called: Cad Services V1.0. This paper discusses the features of this standard and proposed application.

  14. CAD/CAM: Practical and Persuasive in Canadian Schools

    ERIC Educational Resources Information Center

    Willms, Ed

    2007-01-01

    Chances are that many high school students would not know how to use drafting instruments, but some might want to gain competence in computer-assisted design (CAD) and possibly computer-assisted manufacturing (CAM). These students are often attracted to tech courses by the availability of CAD/CAM instructions, and many go on to impress employers…

  15. Integrated computer-aided design using minicomputers

    NASA Technical Reports Server (NTRS)

    Storaasli, O. O.

    1980-01-01

    Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM), a highly interactive software, has been implemented on minicomputers at the NASA Langley Research Center. CAD/CAM software integrates many formerly fragmented programs and procedures into one cohesive system; it also includes finite element modeling and analysis, and has been interfaced via a computer network to a relational data base management system and offline plotting devices on mainframe computers. The CAD/CAM software system requires interactive graphics terminals operating at a minimum of 4800 bits/sec transfer rate to a computer. The system is portable and introduces 'interactive graphics', which permits the creation and modification of models interactively. The CAD/CAM system has already produced designs for a large area space platform, a national transonic facility fan blade, and a laminar flow control wind tunnel model. Besides the design/drafting element analysis capability, CAD/CAM provides options to produce an automatic program tooling code to drive a numerically controlled (N/C) machine. Reductions in time for design, engineering, drawing, finite element modeling, and N/C machining will benefit productivity through reduced costs, fewer errors, and a wider range of configuration.

  16. COMPUTER-AIDED DRAFTING AND DESIGN, A THREE-WEEK SUMMER INSTITUTE TRAINING PROGRAM (MIAMI-DADE JUNIOR COLLEGE, MIAMI, FLORIDA, JULY 10, 1967 - JULY 28, 1967). FINAL REPORT.

    ERIC Educational Resources Information Center

    MORPHONIOS, ALEX G.

    THIRTY-SIX INSTRUCTORS, SUPERVISORS, AND DEPARTMENT CHAIRMEN IN AREAS OF DRAFTING, ENGINEERING, MANUFACTURING, AND COMPUTER TECHNOLOGY AT JUNIOR COLLEGES, TECHNICAL, AND AREA VOCATIONAL SCHOOLS IN 20 STATES ATTENDED A 3-WEEK SUMMER INSTITUTE TRAINING PROGRAM ON COMPUTER-AIDED DRAFTING AND DESIGN. EXPERIENCE IN PROGRAMING THE IBM SYSTEM 1620 WITH…

  17. Multi-site evaluation of a computer aided detection (CAD) algorithm for small acute intra-cranial hemorrhage and development of a stand-alone CAD system ready for deployment in a clinical environment

    NASA Astrophysics Data System (ADS)

    Deshpande, Ruchi R.; Fernandez, James; Lee, Joon K.; Chan, Tao; Liu, Brent J.; Huang, H. K.

    2010-03-01

    Timely detection of Acute Intra-cranial Hemorrhage (AIH) in an emergency environment is essential for the triage of patients suffering from Traumatic Brain Injury. Moreover, the small size of lesions and lack of experience on the reader's part could lead to difficulties in the detection of AIH. A CT based CAD algorithm for the detection of AIH has been developed in order to improve upon the current standard of identification and treatment of AIH. A retrospective analysis of the algorithm has already been carried out with 135 AIH CT studies with 135 matched normal head CT studies from the Los Angeles County General Hospital/ University of Southern California Hospital System (LAC/USC). In the next step, AIH studies have been collected from Walter Reed Army Medical Center, and are currently being processed using the AIH CAD system as part of implementing a multi-site assessment and evaluation of the performance of the algorithm. The sensitivity and specificity numbers from the Walter Reed study will be compared with the numbers from the LAC/USC study to determine if there are differences in the presentation and detection due to the difference in the nature of trauma between the two sites. Simultaneously, a stand-alone system with a user friendly GUI has been developed to facilitate implementation in a clinical setting.

  18. Purchasing Computer-Aided Design Software.

    ERIC Educational Resources Information Center

    Smith, Roger A.

    1992-01-01

    Presents a model for the purchase of computer-aided design (CAD) software: collect general information, observe CAD in use, arrange onsite demonstrations, select CAD software and hardware, and choose a vendor. (JOW)

  19. Effectiveness of using CADD (Computer-Aided Design Drafting) to learn engineering design graphics

    SciTech Connect

    Bertoline, G.R.

    1987-01-01

    One commercial CADD software and one educational CADD software was compared to the use of traditional tools. Engineering-graphics students were divided into three groups. The control group used traditional tools for all their drawings. One experimental group used a commercial CADD software to supplement hand tools and one group used an educational CADD software to supplement traditional tools. These groups were then post-tested using a standardized drafting test. The main findings were: (1) There was no significant difference in the learning of engineering graphics as measured by the post-tests. Supplementing traditional tools with CADD is effective for teaching engineering design graphics. (2) Using CADD for detail drawings such as simple orthographic drawings, sections, and dimensions could be produced in approximately the same amount of time as using traditional tools. (3) It was found that the amount of time needed to solve descriptive geometry problems using CADD was prohibitive. The amount of time to solve some descriptive geometry problems was two or three times greater using CADD versus traditional tools.

  20. Project CAD as of July 1978: CAD support project, situation in July 1978

    NASA Technical Reports Server (NTRS)

    Boesch, L.; Lang-Lendorff, G.; Rothenberg, R.; Stelzer, V.

    1979-01-01

    The structure of Computer Aided Design (CAD) and the requirements for program developments in past and future are described. The actual standard and the future aims of CAD programs are presented. The developed programs in: (1) civil engineering; (2) mechanical engineering; (3) chemical engineering/shipbuilding; (4) electrical engineering; and (5) general programs are discussed.

  1. Shape optimization and CAD

    NASA Technical Reports Server (NTRS)

    Rasmussen, John

    1990-01-01

    Structural optimization has attracted the attention since the days of Galileo. Olhoff and Taylor have produced an excellent overview of the classical research within this field. However, the interest in structural optimization has increased greatly during the last decade due to the advent of reliable general numerical analysis methods and the computer power necessary to use them efficiently. This has created the possibility of developing general numerical systems for shape optimization. Several authors, eg., Esping; Braibant & Fleury; Bennet & Botkin; Botkin, Yang, and Bennet; and Stanton have published practical and successful applications of general optimization systems. Ding and Homlein have produced extensive overviews of available systems. Furthermore, a number of commercial optimization systems based on well-established finite element codes have been introduced. Systems like ANSYS, IDEAS, OASIS, and NISAOPT are widely known examples. In parallel to this development, the technology of computer aided design (CAD) has gained a large influence on the design process of mechanical engineering. The CAD technology has already lived through a rapid development driven by the drastically growing capabilities of digital computers. However, the systems of today are still considered as being only the first generation of a long row of computer integrated manufacturing (CIM) systems. These systems to come will offer an integrated environment for design, analysis, and fabrication of products of almost any character. Thus, the CAD system could be regarded as simply a database for geometrical information equipped with a number of tools with the purpose of helping the user in the design process. Among these tools are facilities for structural analysis and optimization as well as present standard CAD features like drawing, modeling, and visualization tools. The state of the art of structural optimization is that a large amount of mathematical and mechanical techniques are

  2. Cad Graphics in Facilities Planning.

    ERIC Educational Resources Information Center

    Collier, Linda M.

    1984-01-01

    By applying a computer-aided drafting system to a range of facilities layouts and plans, a division of Tektronix, Inc., Oregon, is maintaining staffing levels with an added workload. The tool is also being used in other areas of the company for illustration, design, and administration. (MLF)

  3. Some Workplace Effects of CAD and CAM.

    ERIC Educational Resources Information Center

    Ebel, Karl-H.; Ulrich, Erhard

    1987-01-01

    Examines the impact of computer-aided design (CAD) and computer-aided manufacturing (CAM) on employment, work organization, working conditions, job content, training, and industrial relations in several countries. Finds little evidence of negative employment effects since productivity gains are offset by various compensatory factors. (Author/CH)

  4. CAD/CAM/CAE reshapes engineering processes

    NASA Astrophysics Data System (ADS)

    Ludwinski, Thomas A.

    1993-06-01

    A development history and development trends evaluation is undertaken for computer-aided design/manufacturing/engineering techniques. Attention is drawn to the failure of the Initial Graphics Exchange Specification for standardized transfer of CAD/CAM data among different data bases to support information concerning solids; it is anticipated that the ability to transfer data transparently among CAD/CAM systems will result in major savings to all users, but this directly impinges on company relations.

  5. Basic Drafting: Book Two.

    ERIC Educational Resources Information Center

    Davis, Ronald; And Others

    The second of a two-book course in drafting, this manual consists of 12 topics in the following units: sketching techniques, geometric constructions, orthographic views, dimensioning procedures, basic tolerancing, auxiliary views, sectional views, inking tools and techniques, axonometrics, oblique, perspective, and computer-aided drafting.…

  6. Turnkey CAD/CAM systems' integration with IPAD systems

    NASA Technical Reports Server (NTRS)

    Blauth, R. E.

    1980-01-01

    Today's commercially available turnkey CAD/CAM systems provide a highly interactive environment, and support many specialized application functions for the design/drafting/manufacturing process. This paper presents an overview of several aerospace companies which have successfully integrated turnkey CAD/CAM systems with their own company wide engineering and manufacturing systems. It also includes a vendor's view of the benefits as well as the disadvantages of such integration efforts. Specific emphasis is placed upon the selection of standards for representing geometric engineering data and for communicating such information between different CAD/CAM systems.

  7. An Instructional Method for the AutoCAD Modeling Environment.

    ERIC Educational Resources Information Center

    Mohler, James L.

    1997-01-01

    Presents a command organizer for AutoCAD to aid new uses in operating within the 3-D modeling environment. Addresses analyzing the problem, visualization skills, nonlinear tools, a static view of a dynamic model, the AutoCAD organizer, environment attributes, and control of the environment. Contains 11 references. (JRH)

  8. An Evaluation of Internet-Based CAD Collaboration Tools

    ERIC Educational Resources Information Center

    Smith, Shana Shiang-Fong

    2004-01-01

    Due to the now widespread use of the Internet, most companies now require computer aided design (CAD) tools that support distributed collaborative design on the Internet. Such CAD tools should enable designers to share product models, as well as related data, from geographically distant locations. However, integrated collaborative design…

  9. An application protocol for CAD to CAD transfer of electronic information

    NASA Technical Reports Server (NTRS)

    Azu, Charles C., Jr.

    1993-01-01

    The exchange of Computer Aided Design (CAD) information between dissimilar CAD systems is a problem. This is especially true for transferring electronics CAD information such as multi-chip module (MCM), hybrid microcircuit assembly (HMA), and printed circuit board (PCB) designs. Currently, there exists several neutral data formats for transferring electronics CAD information. These include IGES, EDIF, and DXF formats. All these formats have limitations for use in exchanging electronic data. In an attempt to overcome these limitations, the Navy's MicroCIM program implemented a project to transfer hybrid microcircuit design information between dissimilar CAD systems. The IGES (Initial Graphics Exchange Specification) format is used since it is well established within the CAD industry. The goal of the project is to have a complete transfer of microelectronic CAD information, using IGES, without any data loss. An Application Protocol (AP) is being developed to specify how hybrid microcircuit CAD information will be represented by IGES entity constructs. The AP defines which IGES data items are appropriate for describing HMA geometry, connectivity, and processing as well as HMA material characteristics.

  10. Overview of NASA MSFC IEC Multi-CAD Collaboration Capability

    NASA Technical Reports Server (NTRS)

    Moushon, Brian; McDuffee, Patrick

    2005-01-01

    This viewgraph presentation provides an overview of a Design and Data Management System (DDMS) for Computer Aided Design (CAD) collaboration in order to support the Integrated Engineering Capability (IEC) at Marshall Space Flight Center (MSFC).

  11. CAD-CAE in Electrical Machines and Drives Teaching.

    ERIC Educational Resources Information Center

    Belmans, R.; Geysen, W.

    1988-01-01

    Describes the use of computer-aided design (CAD) techniques in teaching the design of electrical motors. Approaches described include three technical viewpoints, such as electromagnetics, thermal, and mechanical aspects. Provides three diagrams, a table, and conclusions. (YP)

  12. A Case Study in CAD Design Automation

    ERIC Educational Resources Information Center

    Lowe, Andrew G.; Hartman, Nathan W.

    2011-01-01

    Computer-aided design (CAD) software and other product life-cycle management (PLM) tools have become ubiquitous in industry during the past 20 years. Over this time they have continuously evolved, becoming programs with enormous capabilities, but the companies that use them have not evolved their design practices at the same rate. Due to the…

  13. A SINDA thermal model using CAD/CAE technologies

    NASA Technical Reports Server (NTRS)

    Rodriguez, Jose A.; Spencer, Steve

    1992-01-01

    The approach to thermal analysis described by this paper is a technique that incorporates Computer Aided Design (CAD) and Computer Aided Engineering (CAE) to develop a thermal model that has the advantages of Finite Element Methods (FEM) without abandoning the unique advantages of Finite Difference Methods (FDM) in the analysis of thermal systems. The incorporation of existing CAD geometry, the powerful use of a pre and post processor and the ability to do interdisciplinary analysis, will be described.

  14. Complete denture fabrication with CAD/CAM record bases.

    PubMed

    McLaughlin, J Bryan; Ramos, Van

    2015-10-01

    One of the primary goals of new materials and processes for complete denture fabrication has been to reduce polymerization shrinkage. The introduction of computer-aided design and computer-aided manufacturing (CAD/CAM) technology into complete denture fabrication has eliminated polymerization shrinkage in the definitive denture. The use of CAD/CAM record bases for complete denture fabrication can provide a better-fitting denture with fewer postprocessing occlusal errors. PMID:26139040

  15. Computer aided production engineering

    SciTech Connect

    Not Available

    1986-01-01

    This book presents the following contents: CIM in avionics; computer analysis of product designs for robot assembly; a simulation decision mould for manpower forecast and its application; development of flexible manufacturing system; advances in microcomputer applications in CAD/CAM; an automated interface between CAD and process planning; CAM and computer vision; low friction pneumatic actuators for accurate robot control; robot assembly of printed circuit boards; information systems design for computer integrated manufacture; and a CAD engineering language to aid manufacture.

  16. AutoCAD-To-GIFTS Translator Program

    NASA Technical Reports Server (NTRS)

    Jones, Andrew

    1989-01-01

    AutoCAD-to-GIFTS translator program, ACTOG, developed to facilitate quick generation of small finite-element models using CASA/GIFTS finite-element modeling program. Reads geometric data of drawing from Data Exchange File (DXF) used in AutoCAD and other PC-based drafting programs. Geometric entities recognized by ACTOG include points, lines, arcs, solids, three-dimensional lines, and three-dimensional faces. From this information, ACTOG creates GIFTS SRC file, which then reads into GIFTS preprocessor BULKM or modified and reads into EDITM to create finite-element model. SRC file used as is or edited for any number of uses. Written in Microsoft Quick-Basic (Version 2.0).

  17. Cost reduction advantages of CAD/CAM

    NASA Astrophysics Data System (ADS)

    Parsons, G. T.

    1983-05-01

    Features of the CAD/CAM system implemented at the General Dynamics Convair division are summarized. CAD/CAM was initiated in 1976 to enhance engineering, manufacturing and quality assurance and thereby the company's competitive bidding position. Numerical models are substituted for hardware models wherever possible and numerical criteria are defined in design for guiding computer-controlled parts manufacturing machines. The system comprises multiple terminals, a data base, digitizer, printers, disk and tape drives, and graphics displays. The applications include the design and manufacture of parts and components for avionics, structures, scientific investigations, and aircraft structural components. Interfaces with other computers allow structural analyses by finite element codes. Although time savings have not been gained compared to manual drafting, components of greater complexity than could have been designed by hand have been designed and manufactured.

  18. Computer-aided design development transition for IPAD environment

    NASA Technical Reports Server (NTRS)

    Owens, H. G.; Mock, W. D.; Mitchell, J. C.

    1980-01-01

    The relationship of federally sponsored computer-aided design/computer-aided manufacturing (CAD/CAM) programs to the aircraft life cycle design process, an overview of NAAD'S CAD development program, an evaluation of the CAD design process, a discussion of the current computing environment within which NAAD is developing its CAD system, some of the advantages/disadvantages of the NAAD-IPAD approach, and CAD developments during transition into the IPAD system are discussed.

  19. CAD software lights up the environmental scene

    SciTech Connect

    Basta, N.

    1996-01-01

    There seems to be a natural affinity between the data requirements of environmental work and computer-aided design (CAD) software. Perhaps the best example of this is the famous shots of the ozone hole produced by computer-enhanced satellite imagery in the mid-1980s. Once this image was published, the highly abstract discussion of ozone concentrations and arctic wind patterns suddenly became very real. On ground level, in the day-to-day work of environmental managers and site restorers, CAD software is proving its value over and over. Graphic images are a convenient, readily understandable way of presenting the large volumes of data produced by environmental projects. With the latest CAD systems, the work of specifying process equipment or subsurface conditions can be reused again and again as projects move from the study and design phase to the construction or remediation phases. An important subset of CAD is geographic information systems (GIS), which are used to organize data on a site-specific basis. Like CAD itself, GIS reaches out beyond the borders of the computer screen or printout, in such ways making use of the Geostationary Positioning System (a global method of locating position precisely), and matching current with historical data. Good GIS software can also make use of the large database of geological data produced by government and industry, thus saving on surveying costs and exploratory well construction.

  20. Schools (Students) Exchanging CAD/CAM Files over the Internet.

    ERIC Educational Resources Information Center

    Mahoney, Gary S.; Smallwood, James E.

    This document discusses how students and schools can benefit from exchanging computer-aided design/computer-aided manufacturing (CAD/CAM) files over the Internet, explains how files are exchanged, and examines the problem of selected hardware/software incompatibility. Key terms associated with information search services are defined, and several…

  1. Westinghouse Idaho Nuclear Company, Inc. (WINCO) CAD activities at the Idaho Chemical Processing Plant (ICPP) (Idaho Engineering Laboratory)

    SciTech Connect

    Jensen, B.

    1989-04-18

    June 1985 -- The drafting manager obtained approval to implement a cad system at the ICPP. He formed a committee to evaluate the various cad systems and recommend a system that would most benefit the ICPP. A PC'' (personal computer) based system using Autocad software was recommended in lieu of the much more expensive main frame based systems.

  2. Westinghouse Idaho Nuclear Company, Inc. (WINCO) CAD activities at the Idaho Chemical Processing Plant (ICPP) (Idaho Engineering Laboratory)

    SciTech Connect

    Jensen, B.

    1989-04-18

    June 1985 -- The drafting manager obtained approval to implement a cad system at the ICPP. He formed a committee to evaluate the various cad systems and recommend a system that would most benefit the ICPP. A ``PC`` (personal computer) based system using Autocad software was recommended in lieu of the much more expensive main frame based systems.

  3. Resin-composite blocks for dental CAD/CAM applications.

    PubMed

    Ruse, N D; Sadoun, M J

    2014-12-01

    Advances in digital impression technology and manufacturing processes have led to a dramatic paradigm shift in dentistry and to the widespread use of computer-aided design/computer-aided manufacturing (CAD/CAM) in the fabrication of indirect dental restorations. Research and development in materials suitable for CAD/CAM applications are currently the most active field in dental materials. Two classes of materials are used in the production of CAD/CAM restorations: glass-ceramics/ceramics and resin composites. While glass-ceramics/ceramics have overall superior mechanical and esthetic properties, resin-composite materials may offer significant advantages related to their machinability and intra-oral reparability. This review summarizes recent developments in resin-composite materials for CAD/CAM applications, focusing on both commercial and experimental materials. PMID:25344335

  4. CAD/CAM improves productivity in nonaerospace job shops

    NASA Astrophysics Data System (ADS)

    Koenig, D. T.

    1982-12-01

    Business cost improvements that can result from Computer Aided Design/Computer Aided Manufacturing (CAD/CAM), when properly applied, are discussed. Emphasis is placed on the use of CAD/CAM for machine and process control, design and planning control, and production and measurement control. It is pointed out that the implementation of CAD/CAM should be based on the following priorities: (1) recognize interrelationships between the principal functions of CAD/CAM; (2) establish a Systems Council to determine overall strategy and specify the communications/decision-making system; (3) implement the communications/decision-making system to improve productivity; and (4) implement interactive graphics and other additions to further improve productivity.

  5. Resin-composite Blocks for Dental CAD/CAM Applications

    PubMed Central

    Ruse, N.D.; Sadoun, M.J.

    2014-01-01

    Advances in digital impression technology and manufacturing processes have led to a dramatic paradigm shift in dentistry and to the widespread use of computer-aided design/computer-aided manufacturing (CAD/CAM) in the fabrication of indirect dental restorations. Research and development in materials suitable for CAD/CAM applications are currently the most active field in dental materials. Two classes of materials are used in the production of CAD/CAM restorations: glass-ceramics/ceramics and resin composites. While glass-ceramics/ceramics have overall superior mechanical and esthetic properties, resin-composite materials may offer significant advantages related to their machinability and intra-oral reparability. This review summarizes recent developments in resin-composite materials for CAD/CAM applications, focusing on both commercial and experimental materials. PMID:25344335

  6. Computer-Aided Design in Further Education.

    ERIC Educational Resources Information Center

    Ingham, Peter, Ed.

    This publication updates the 1982 occasional paper that was intended to foster staff awareness and assist colleges in Great Britain considering the use of computer-aided design (CAD) material in engineering courses. The paper begins by defining CAD and its place in the Integrated Business System with a brief discussion of the effect of CAD on the…

  7. Using a commercial CAD system for simultaneous input to theoretical aerodynamic programs and wind-tunnel model construction

    NASA Technical Reports Server (NTRS)

    Enomoto, F.; Keller, P.

    1984-01-01

    The Computer Aided Design (CAD) system's common geometry database was used to generate input for theoretical programs and numerically controlled (NC) tool paths for wind tunnel part fabrication. This eliminates the duplication of work in generating separate geometry databases for each type of analysis. Another advantage is that it reduces the uncertainty due to geometric differences when comparing theoretical aerodynamic data with wind tunnel data. The system was adapted to aerodynamic research by developing programs written in Design Analysis Language (DAL). These programs reduced the amount of time required to construct complex geometries and to generate input for theoretical programs. Certain shortcomings of the Design, Drafting, and Manufacturing (DDM) software limited the effectiveness of these programs and some of the Calma NC software. The complexity of aircraft configurations suggests that more types of surface and curve geometry should be added to the system. Some of these shortcomings may be eliminated as improved versions of DDM are made available.

  8. DeviceEditor visual biological CAD canvas

    PubMed Central

    2012-01-01

    Background Biological Computer Aided Design (bioCAD) assists the de novo design and selection of existing genetic components to achieve a desired biological activity, as part of an integrated design-build-test cycle. To meet the emerging needs of Synthetic Biology, bioCAD tools must address the increasing prevalence of combinatorial library design, design rule specification, and scar-less multi-part DNA assembly. Results We report the development and deployment of web-based bioCAD software, DeviceEditor, which provides a graphical design environment that mimics the intuitive visual whiteboard design process practiced in biological laboratories. The key innovations of DeviceEditor include visual combinatorial library design, direct integration with scar-less multi-part DNA assembly design automation, and a graphical user interface for the creation and modification of design specification rules. We demonstrate how biological designs are rendered on the DeviceEditor canvas, and we present effective visualizations of genetic component ordering and combinatorial variations within complex designs. Conclusions DeviceEditor liberates researchers from DNA base-pair manipulation, and enables users to create successful prototypes using standardized, functional, and visual abstractions. Open and documented software interfaces support further integration of DeviceEditor with other bioCAD tools and software platforms. DeviceEditor saves researcher time and institutional resources through correct-by-construction design, the automation of tedious tasks, design reuse, and the minimization of DNA assembly costs. PMID:22373390

  9. Group technology methods for integrated CAD/CAM

    NASA Astrophysics Data System (ADS)

    Propen, M.; Jacko, J.

    1984-10-01

    The use of a single product definition and comprehensive database are key factors in integrating CAD and CAM. This paper describes one approach for investigating the scope of developing a full scale Group Technology (GT) system. The prototype GT system discussed required the integration of a decision logic processor, relational database, and design/drafting system, and demonstrated a generative process planning system for a family of gas turbine engine components.

  10. Productivity improvements through the use of CAD/CAM

    NASA Astrophysics Data System (ADS)

    Wehrman, M. D.

    This paper focuses on Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) productivity improvements that occurred in the Boeing Commercial Airplane Company (BCAC) between 1979 and 1983, with a look at future direction. Since the introduction of numerically controlled machinery in the 1950s, a wide range of engineering and manufacturing applications has evolved. The main portion of this paper includes a summarized and illustrated cross-section of these applications, touching on benefits such as reduced tooling, shortened flow time, increased accuracy, and reduced labor hours. The current CAD/CAM integration activity, directed toward capitalizing on this productivity in the future, is addressed.

  11. Generating Composite Overlapping Grids on CAD Geometries

    SciTech Connect

    Henshaw, W.D.

    2002-02-07

    We describe some algorithms and tools that have been developed to generate composite overlapping grids on geometries that have been defined with computer aided design (CAD) programs. This process consists of five main steps. Starting from a description of the surfaces defining the computational domain we (1) correct errors in the CAD representation, (2) determine topology of the patched-surface, (3) build a global triangulation of the surface, (4) construct structured surface and volume grids using hyperbolic grid generation, and (5) generate the overlapping grid by determining the holes and the interpolation points. The overlapping grid generator which is used for the final step also supports the rapid generation of grids for block-structured adaptive mesh refinement and for moving grids. These algorithms have been implemented as part of the Overture object-oriented framework.

  12. Refocusing CAD and CAE on O and M

    SciTech Connect

    Podczerwinski, C.A.; Wittenauer, J.P.; Irish, J.D.

    1995-09-01

    In the late 1980s, computer-aided design (CAD) software started to migrate from larger computer equipment to personal computers. Since then, competition in the desktop computer market transformed the personal computer (PC) into an office equipment commodity. The technological improvements accompanying that change transformed CAD from an expensive, specialized tool to an office software commodity that is a graphical counterpart to the word processor. The cost reductions and performance improvements have made many application concepts, previously too cumbersome to apply, cost effective and helpful. Applying these ideas has increased the level of CAD usage in their offices dramatically. Part of that growth has been an increasing number of projects directly aimed at helping reduce operation and maintenance (O and M) costs. This paper describes those projects and discusses the application of CAD to O and M work.

  13. The Use of a Parametric Feature Based CAD System to Teach Introductory Engineering Graphics.

    ERIC Educational Resources Information Center

    Howell, Steven K.

    1995-01-01

    Describes the use of a parametric-feature-based computer-aided design (CAD) System, AutoCAD Designer, in teaching concepts of three dimensional geometrical modeling and design. Allows engineering graphics to go beyond the role of documentation and communication and allows an engineer to actually build a virtual prototype of a design idea and…

  14. Teaching an Introductory CAD Course with the System-Engineering Approach.

    ERIC Educational Resources Information Center

    Pao, Y. C.

    1985-01-01

    Advocates that introductory computer aided design (CAD) courses be incorporated into engineering curricula in close conjunction with the system dynamics course. Block diagram manipulation/Bode analysis and finite elementary analysis are used as examples to illustrate the interdisciplinary nature of CAD teaching. (JN)

  15. Computer Aided Design in Engineering Education.

    ERIC Educational Resources Information Center

    Gobin, R.

    1986-01-01

    Discusses the use of Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM) systems in an undergraduate engineering education program. Provides a rationale for CAD/CAM use in the already existing engineering program. Describes the methods used in choosing the systems, some initial results, and warnings for first-time users. (TW)

  16. A new CAD approach for improving efficacy of cancer screening

    NASA Astrophysics Data System (ADS)

    Zheng, Bin; Qian, Wei; Li, Lihua; Pu, Jiantao; Kang, Yan; Lure, Fleming; Tan, Maxine; Qiu, Yuchen

    2015-03-01

    Since performance and clinical utility of current computer-aided detection (CAD) schemes of detecting and classifying soft tissue lesions (e.g., breast masses and lung nodules) is not satisfactory, many researchers in CAD field call for new CAD research ideas and approaches. The purpose of presenting this opinion paper is to share our vision and stimulate more discussions of how to overcome or compensate the limitation of current lesion-detection based CAD schemes in the CAD research community. Since based on our observation that analyzing global image information plays an important role in radiologists' decision making, we hypothesized that using the targeted quantitative image features computed from global images could also provide highly discriminatory power, which are supplementary to the lesion-based information. To test our hypothesis, we recently performed a number of independent studies. Based on our published preliminary study results, we demonstrated that global mammographic image features and background parenchymal enhancement of breast MR images carried useful information to (1) predict near-term breast cancer risk based on negative screening mammograms, (2) distinguish between true- and false-positive recalls in mammography screening examinations, and (3) classify between malignant and benign breast MR examinations. The global case-based CAD scheme only warns a risk level of the cases without cueing a large number of false-positive lesions. It can also be applied to guide lesion-based CAD cueing to reduce false-positives but enhance clinically relevant true-positive cueing. However, before such a new CAD approach is clinically acceptable, more work is needed to optimize not only the scheme performance but also how to integrate with lesion-based CAD schemes in the clinical practice.

  17. CAD/CAM-assisted breast reconstruction.

    PubMed

    Melchels, Ferry; Wiggenhauser, Paul Severin; Warne, David; Barry, Mark; Ong, Fook Rhu; Chong, Woon Shin; Hutmacher, Dietmar Werner; Schantz, Jan-Thorsten

    2011-09-01

    The application of computer-aided design and manufacturing (CAD/CAM) techniques in the clinic is growing slowly but steadily. The ability to build patient-specific models based on medical imaging data offers major potential. In this work we report on the feasibility of employing laser scanning with CAD/CAM techniques to aid in breast reconstruction. A patient was imaged with laser scanning, an economical and facile method for creating an accurate digital representation of the breasts and surrounding tissues. The obtained model was used to fabricate a customized mould that was employed as an intra-operative aid for the surgeon performing autologous tissue reconstruction of the breast removed due to cancer. Furthermore, a solid breast model was derived from the imaged data and digitally processed for the fabrication of customized scaffolds for breast tissue engineering. To this end, a novel generic algorithm for creating porosity within a solid model was developed, using a finite element model as intermediate. PMID:21900731

  18. CAD/CAM for optomechatronics

    NASA Astrophysics Data System (ADS)

    Zhou, Haiguang; Han, Min

    2003-10-01

    We focus at CAD/CAM for optomechatronics. We have developed a kind of CAD/CAM, which is not only for mechanics but also for optics and electronic. The software can be used for training and education. We introduce mechanical CAD, optical CAD and electrical CAD, we show how to draw a circuit diagram, mechanical diagram and luminous transmission diagram, from 2D drawing to 3D drawing. We introduce how to create 2D and 3D parts for optomechatronics, how to edit tool paths, how to select parameters for process, how to run the post processor, dynamic show the tool path and generate the CNC programming. We introduce the joint application of CAD&CAM. We aim at how to match the requirement of optical, mechanical and electronics.

  19. Construction and study of a standard TWT MMACE drafting example

    SciTech Connect

    Thelen, D.; Hillenberg, S.

    1996-12-31

    MMACE (Microwave and Millimeter-wave Advanced Computational Environment) is being developed with a primary focus on simulation of linear-beam microwave devices. Device information is entered into MMACE via either (1) CAD drawings or (2) parameters entered by the user. CAD drawing files are annotated with material information (names and/or properties) and specifications of electron beam simulation regions. MMACE CAD simulation codes use information obtained form the CAD drawing files to predict performance characteristics of the particular design. Parameters entered by the user for use in MMACE parametric codes include physical dimensions and rf quantities, such as helix circuit loss per unit axial length. Some MMACE parametric codes, such as the code for the electron gun section, output design information instead of simulation results. The authors have generated a MMACE CAD drafting model of an example 40W helix TWT from its construction drawings. This CAD example will be used as standardized input for evaluating new MMACE simulation codes.

  20. Using High-Performance Graphics Machines in an Undergraduate CAD Course.

    ERIC Educational Resources Information Center

    Kirkpatrick, Allan; And Others

    1987-01-01

    Explains the approach taken at Colorado State University in a collegewide undergraduate computer-aided design (CAD) course. Reviews the topic areas covered, project requirements, and assesses the use of high-performance graphics devices. (ML)

  1. Correlating Trainee Attributes to Performance in 3D CAD Training

    ERIC Educational Resources Information Center

    Hamade, Ramsey F.; Artail, Hassan A.; Sikstrom, Sverker

    2007-01-01

    Purpose: The purpose of this exploratory study is to identify trainee attributes relevant for development of skills in 3D computer-aided design (CAD). Design/methodology/approach: Participants were trained to perform cognitive tasks of comparable complexity over time. Performance data were collected on the time needed to construct test models, and…

  2. Alternatives for Saving and Viewing CAD Graphics for the Web.

    ERIC Educational Resources Information Center

    Harris, La Verne Abe; Sadowski, Mary A.

    2001-01-01

    Introduces some alternatives for preparing and viewing computer aided design (CAD) graphics for Internet output on a budget, without the fear of copyright infringement, and without having to go back to college to learn a complex graphic application. (Author/YDS)

  3. Program Evolves from Basic CAD to Total Manufacturing Experience

    ERIC Educational Resources Information Center

    Cassola, Joel

    2011-01-01

    Close to a decade ago, John Hersey High School (JHHS) in Arlington Heights, Illinois, made a transition from a traditional classroom-based pre-engineering program. The new program is geared towards helping students understand the entire manufacturing process. Previously, a JHHS student would design a project in computer-aided design (CAD) software…

  4. Computerized design of CAD

    NASA Astrophysics Data System (ADS)

    Paul, B. E.; Pham, T. A.

    1982-11-01

    A computerized ballistic design technique for CAD/PAD is described by which a set of ballistic design parameters are determined, all of which satisfy a particular performance requirement. In addition, the program yields the remaining performance predictions, so that only a very few computer runs of the design program can quickly bring the ballistic design within the specification limits prescribed. An example is presented for a small propulsion device, such as a remover or actuator, for which the input specifications define a maximum allowable thrust and minimum end-of-stroke velocity. The resulting output automatically satisfies the input requirements, and will always yield an acceptable ballistic design.

  5. Complete denture fabrication supported by CAD/CAM.

    PubMed

    Wimmer, Timea; Gallus, Korbinian; Eichberger, Marlis; Stawarczyk, Bogna

    2016-05-01

    The inclusion of computer-aided design/computer-aided manufacturing (CAD/CAM) technology into complete denture fabrication facilitates the procedures. The presented workflow for complete denture fabrication combines conventional and digitally supported treatment steps for improving dental care. With the presented technique, the registration of the occlusal plane, the determination of the ideal lip support, and the verification of the maxillomandibular relationship record are considered. PMID:26774323

  6. An Algorithm for Projecting Points onto a Patched CAD Model

    SciTech Connect

    Henshaw, W D

    2001-05-29

    We are interested in building structured overlapping grids for geometries defined by computer-aided-design (CAD) packages. Geometric information defining the boundary surfaces of a computation domain is often provided in the form of a collection of possibly hundreds of trimmed patches. The first step in building an overlapping volume grid on such a geometry is to build overlapping surface grids. A surface grid is typically built using hyperbolic grid generation; starting from a curve on the surface, a grid is grown by marching over the surface. A given hyperbolic grid will typically cover many of the underlying CAD surface patches. The fundamental operation needed for building surface grids is that of projecting a point in space onto the closest point on the CAD surface. We describe an fast algorithm for performing this projection, it will make use of a fairly coarse global triangulation of the CAD geometry. We describe how to build this global triangulation by first determining the connectivity of the CAD surface patches. This step is necessary since it often the case that the CAD description will contain no information specifying how a given patch connects to other neighboring patches. Determining the connectivity is difficult since the surface patches may contain mistakes such as gaps or overlaps between neighboring patches.

  7. CAD data exchange with Martin Marietta Energy Systems, Inc., Oak Ridge, TN

    SciTech Connect

    Smith, K.L.

    1994-10-01

    This document has been developed to provide guidance in the interchange of electronic CAD data with Martin Marietta Energy Systems, Inc., Oak Ridge, Tennessee. It is not meant to be as comprehensive as the existing standards and specifications, but to provide a minimum set of practices that will enhance the success of the CAD data exchange. It is now a Department of Energy (DOE) Oak Ridge Field Office requirement that Architect-Engineering (A-E) firms prepare all new drawings using a Computer Aided Design (CAD) system that is compatible with the Facility Manager`s (FM) CAD system. For Oak Ridge facilities, the CAD system used for facility design by the FM, Martin Marietta Energy Systems, Inc., is Intregraph. The format for interchange of CAD data for Oak Ridge facilities will be the Intergraph MicroStation/IGDS format.

  8. CAD/CAM data management

    NASA Technical Reports Server (NTRS)

    Bray, O. H.

    1984-01-01

    The role of data base management in CAD/CAM, particularly for geometric data is described. First, long term and short term objectives for CAD/CAM data management are identified. Second, the benefits of the data base management approach are explained. Third, some of the additional work needed in the data base area is discussed.

  9. A method for assurance of image integrity in CAD-PACS integration

    NASA Astrophysics Data System (ADS)

    Zhou, Zheng

    2007-03-01

    Computer Aided Detection/Diagnosis (CAD) can greatly assist in the clinical decision making process, and therefore, has drawn tremendous research efforts. However, integrating independent CAD workstation results with the clinical diagnostic workflow still remains challenging. We have presented a CAD-PACS integration toolkit that complies with DICOM standard and IHE profiles. One major issue in CAD-PACS integration is the security of the images used in CAD post-processing and the corresponding CAD result images. In this paper, we present a method for assuring the integrity of both DICOM images used in CAD post-processing and the CAD image results that are in BMP or JPEG format. The method is evaluated in a PACS simulator that simulates clinical PACS workflow. It can also be applied to multiple CAD applications that are integrated with the PACS simulator. The successful development and evaluation of this method will provide a useful approach for assuring image integrity of the CAD-PACS integration in clinical diagnosis.

  10. How to Quickly Import CAD Geometry into Thermal Desktop

    NASA Technical Reports Server (NTRS)

    Wright, Shonte; Beltran, Emilio

    2002-01-01

    There are several groups at JPL (Jet Propulsion Laboratory) that are committed to concurrent design efforts, two are featured here. Center for Space Mission Architecture and Design (CSMAD) enables the practical application of advanced process technologies in JPL's mission architecture process. Team I functions as an incubator for projects that are in the Discovery, and even pre-Discovery proposal stages. JPL's concurrent design environment is to a large extent centered on the CAD (Computer Aided Design) file. During concurrent design sessions CAD geometry is ported to other more specialized engineering design packages.

  11. How to Quickly Import CAD Geometry into Thermal Desktop

    NASA Astrophysics Data System (ADS)

    Wright, Shonte; Beltran, Emilio

    2002-07-01

    There are several groups at JPL (Jet Propulsion Laboratory) that are committed to concurrent design efforts, two are featured here. Center for Space Mission Architecture and Design (CSMAD) enables the practical application of advanced process technologies in JPL's mission architecture process. Team I functions as an incubator for projects that are in the Discovery, and even pre-Discovery proposal stages. JPL's concurrent design environment is to a large extent centered on the CAD (Computer Aided Design) file. During concurrent design sessions CAD geometry is ported to other more specialized engineering design packages.

  12. Performance evaluation of the NASA/KSC CAD/CAE and office automation LAN's

    NASA Technical Reports Server (NTRS)

    Zobrist, George W.

    1994-01-01

    This study's objective is the performance evaluation of the existing CAD/CAE (Computer Aided Design/Computer Aided Engineering) network at NASA/KSC. This evaluation also includes a similar study of the Office Automation network, since it is being planned to integrate this network into the CAD/CAE network. The Microsoft mail facility which is presently on the CAD/CAE network was monitored to determine its present usage. This performance evaluation of the various networks will aid the NASA/KSC network managers in planning for the integration of future workload requirements into the CAD/CAE network and determining the effectiveness of the planned FDDI (Fiber Distributed Data Interface) migration.

  13. Comparative fracture strength analysis of Lava and Digident CAD/CAM zirconia ceramic crowns

    PubMed Central

    Kwon, Taek-Ka; Pak, Hyun-Soon; Han, Jung-Suk; Lee, Jai-Bong; Kim, Sung-Hun

    2013-01-01

    PURPOSE All-ceramic crowns are subject to fracture during function. To minimize this common clinical complication, zirconium oxide has been used as the framework for all-ceramic crowns. The aim of this study was to compare the fracture strengths of two computer-aided design/computer-aided manufacturing (CAD/CAM) zirconia crown systems: Lava and Digident. MATERIALS AND METHODS Twenty Lava CAD/CAM zirconia crowns and twenty Digident CAD/CAM zirconia crowns were fabricated. A metal die was also duplicated from the original prepared tooth for fracture testing. A universal testing machine was used to determine the fracture strength of the crowns. RESULTS The mean fracture strengths were as follows: 54.9 ± 15.6 N for the Lava CAD/CAM zirconia crowns and 87.0 ± 16.0 N for the Digident CAD/CAM zirconia crowns. The difference between the mean fracture strengths of the Lava and Digident crowns was statistically significant (P<.001). Lava CAD/CAM zirconia crowns showed a complete fracture of both the veneering porcelain and the core whereas the Digident CAD/CAM zirconia crowns showed fracture only of the veneering porcelain. CONCLUSION The fracture strengths of CAD/CAM zirconia crowns differ depending on the compatibility of the core material and the veneering porcelain. PMID:23755332

  14. High-Quality Draft Genomes of Two Vibrio parahaemolyticus Strains Aid in Understanding Acute Hepatopancreatic Necrosis Disease of Cultured Shrimps in Mexico

    PubMed Central

    Noriega-Orozco, Lorena; Sotelo-Mundo, Rogerio R.; Cantu-Robles, Vito A.; Cobian-Guemes, Ana G.; Cota-Verdugo, Rosario G.; Gamez-Alejo, Luis A.; del Pozo-Yauner, Luis; Guevara-Hernandez, Eduardo; Garcia-Orozco, Karina D.; Lopez-Zavala, Alonso A.

    2014-01-01

    The high-quality draft genomes of two Vibrio parahaemolyticus strains, one that causes the acute hepatopancreatic necrosis disease (AHPND) in cultured shrimps (FIM-S1708+), and another that does not (FIM-S1392−) are reported. A chromosome-scale assembly for the FIM-S1392− genome is reported here. The analysis of the two genomes gives some clues regarding the genomic differences between the strains. PMID:25125645

  15. Mechanical Drafting.

    ERIC Educational Resources Information Center

    McClain, Gerald R.

    This publication, the third in a series on drafting, is intended to strengthen students' competence in the specialized field of mechanical drafting. The text consists of instructional materials for both teacher and students, written in terms of student performance using measurable objectives. The course includes 11 units. Each instructional unit…

  16. Architectural Drafting.

    ERIC Educational Resources Information Center

    Davis, Ronald; Yancey, Bruce

    Designed to be used as a supplement to a two-book course in basic drafting, these instructional materials consisting of 14 units cover the process of drawing all working drawings necessary for residential buildings. The following topics are covered in the individual units: introduction to architectural drafting, lettering and tools, site…

  17. An Educational Exercise Examining the Role of Model Attributes on the Creation and Alteration of CAD Models

    ERIC Educational Resources Information Center

    Johnson, Michael D.; Diwakaran, Ram Prasad

    2011-01-01

    Computer-aided design (CAD) is a ubiquitous tool that today's students will be expected to use proficiently for numerous engineering purposes. Taking full advantage of the features available in modern CAD programs requires that models are created in a manner that allows others to easily understand how they are organized and alter them in an…

  18. Computer Aided Manufacturing.

    ERIC Educational Resources Information Center

    Insolia, Gerard

    This document contains course outlines in computer-aided manufacturing developed for a business-industry technology resource center for firms in eastern Pennsylvania by Northampton Community College. The four units of the course cover the following: (1) introduction to computer-assisted design (CAD)/computer-assisted manufacturing (CAM); (2) CAM…

  19. An accelerated technique for a ceramic-pressed-to-metal restoration with CAD/CAM technology.

    PubMed

    Lee, Ju-Hyoung

    2014-11-01

    The conventional fabrication of metal ceramic restorations depends on an experienced dental technician and requires a long processing time. However, complete-contour digital waxing and digital cutback with computer-aided design and computer-aided manufacturing (CAD/CAM) technology can overcome these disadvantages and provide a correct metal framework design and space for the ceramic material. PMID:24952883

  20. Challenges facing developers of CAD/CAM models that seek to predict human working postures

    NASA Astrophysics Data System (ADS)

    Wiker, Steven F.

    2005-11-01

    This paper outlines the need for development of human posture prediction models for Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM) design applications in product, facility and work design. Challenges facing developers of posture prediction algorithms are presented and discussed.

  1. Mammogram CAD, hybrid registration and iconic analysis

    NASA Astrophysics Data System (ADS)

    Boucher, A.; Cloppet, F.; Vincent, N.

    2013-03-01

    This paper aims to develop a computer aided diagnosis (CAD) based on a two-step methodology to register and analyze pairs of temporal mammograms. The concept of "medical file", including all the previous medical information on a patient, enables joint analysis of different acquisitions taken at different times, and the detection of significant modifications. The developed registration method aims to superimpose at best the different anatomical structures of the breast. The registration is designed in order to get rid of deformation undergone by the acquisition process while preserving those due to breast changes indicative of malignancy. In order to reach this goal, a referent image is computed from control points based on anatomical features that are extracted automatically. Then the second image of the couple is realigned on the referent image, using a coarse-to-fine approach according to expert knowledge that allows both rigid and non-rigid transforms. The joint analysis detects the evolution between two images representing the same scene. In order to achieve this, it is important to know the registration error limits in order to adapt the observation scale. The approach used in this paper is based on an image sparse representation. Decomposed in regular patterns, the images are analyzed under a new angle. The evolution detection problem has many practical applications, especially in medical images. The CAD is evaluated using recall and precision of differences in mammograms.

  2. On the Design of a CADS for Shoulder Pain Pathology

    NASA Astrophysics Data System (ADS)

    de Ipiña, K. López; Hernández, M. C.; Martínez, E.; Vaquero, C.

    A musculoskeletal disorder is a condition of the musculoskeletal system, which consists in part of it being injured continuously over time. Shoulder disorders are one of the most common musculoskeletal cases attended in primary health care services. Shoulder disorders cause pain and limit the ability to perform many routine activities, affecting about 15-25 % of the general population. Several clinical tests have been described to aid diagnosis of shoulder disorders. However, the current literature acknowledges a lack of concordance in clinical assessment, even among musculoskeletal specialists. We are working on the design of a Computer-Aided Decision Support (CADS) system for Shoulder Pain Pathology. The paper presents the results of our efforts to build a CADS system testing several classical classification paradigms, feature reduction methods (PCA) and K-means unsupervised clustering. The small database size imposes the use of robust covariance matrix estimation methods to improve the system performance. Finally, the system was evaluated by a medical specialist.

  3. Productivity increase through implementation of CAD/CAE workstation

    NASA Technical Reports Server (NTRS)

    Bromley, L. K.

    1985-01-01

    The tracking and communication division computer aided design/computer aided engineering system is now operational. The system is utilized in an effort to automate certain tasks that were previously performed manually. These tasks include detailed test configuration diagrams of systems under certification test in the ESTL, floorplan layouts of future planned laboratory reconfigurations, and other graphical documentation of division activities. The significant time savings achieved with this CAD/CAE system are examined: (1) input of drawings and diagrams; (2) editing of initial drawings; (3) accessibility of the data; and (4) added versatility. It is shown that the Applicon CAD/CAE system, with its ease of input and editing, the accessibility of data, and its added versatility, has made more efficient many of the necessary but often time-consuming tasks associated with engineering design and testing.

  4. Effects of MicroCAD on Learning Fundamental Engineering Graphical Concepts: A Qualitative Study.

    ERIC Educational Resources Information Center

    Leach, James A.; Gull, Randall L.

    1990-01-01

    Students' reactions and performances were examined when taught engineering geometry concepts using a standard microcomputer-aided drafting software package. Two sample groups were compared based on their computer experience. Included are the methodology, data analysis, and conclusions. (KR)

  5. Understanding dental CAD/CAM for restorations--the digital workflow from a mechanical engineering viewpoint.

    PubMed

    Tapie, L; Lebon, N; Mawussi, B; Fron Chabouis, H; Duret, F; Attal, J-P

    2015-01-01

    As digital technology infiltrates every area of daily life, including the field of medicine, so it is increasingly being introduced into dental practice. Apart from chairside practice, computer-aided design/computer-aided manufacturing (CAD/CAM) solutions are available for creating inlays, crowns, fixed partial dentures (FPDs), implant abutments, and other dental prostheses. CAD/CAM dental solutions can be considered a chain of digital devices and software for the almost automatic design and creation of dental restorations. However, dentists who want to use the technology often do not have the time or knowledge to understand it. A basic knowledge of the CAD/CAM digital workflow for dental restorations can help dentists to grasp the technology and purchase a CAM/CAM system that meets the needs of their office. This article provides a computer-science and mechanical-engineering approach to the CAD/CAM digital workflow to help dentists understand the technology. PMID:25911827

  6. Dental students' preferences and performance in crown design: conventional wax-added versus CAD.

    PubMed

    Douglas, R Duane; Hopp, Christa D; Augustin, Marcus A

    2014-12-01

    The purpose of this study was to evaluate dental students' perceptions of traditional waxing vs. computer-aided crown design and to determine the effectiveness of either technique through comparative grading of the final products. On one of twoidentical tooth preparations, second-year students at one dental school fabricated a wax pattern for a full contour crown; on the second tooth preparation, the same students designed and fabricated an all-ceramic crown using computer-aided design (CAD) and computer-aided manufacturing (CAM) technology. Projects were graded for occlusion and anatomic form by three faculty members. On completion of the projects, 100 percent of the students (n=50) completed an eight-question, five-point Likert scalesurvey, designed to assess their perceptions of and learning associated with the two design techniques. The average grades for the crown design projects were 78.3 (CAD) and 79.1 (wax design). The mean numbers of occlusal contacts were 3.8 (CAD) and 2.9(wax design), which was significantly higher for CAD (p=0.02). The survey results indicated that students enjoyed designing afull contour crown using CAD as compared to using conventional wax techniques and spent less time designing the crown using CAD. From a learning perspective, students felt that they learned more about position and the size/strength of occlusal contacts using CAD. However, students recognized that CAD technology has limits in terms of representing anatomic contours and excursive occlusion compared to conventional wax techniques. The results suggest that crown design using CAD could be considered as an adjunct to conventional wax-added techniques in preclinical fixed prosthodontic curricula. PMID:25480282

  7. On the Use of CAD-Native Predicates and Geometry in Surface Meshing

    NASA Technical Reports Server (NTRS)

    Aftosmis, M. J.

    1999-01-01

    Several paradigms for accessing computer-aided design (CAD) geometry during surface meshing for computational fluid dynamics are discussed. File translation, inconsistent geometry engines, and nonnative point construction are all identified as sources of nonrobustness. The paper argues in favor of accessing CAD parts and assemblies in their native format, without translation, and for the use of CAD-native predicates and constructors in surface mesh generation. The discussion also emphasizes the importance of examining the computational requirements for exact evaluation of triangulation predicates during surface meshing.

  8. Selective reduction of CAD false-positive findings

    NASA Astrophysics Data System (ADS)

    Camarlinghi, N.; Gori, I.; Retico, A.; Bagagli, F.

    2010-03-01

    Computer-Aided Detection (CAD) systems are becoming widespread supporting tools to radiologists' diagnosis, especially in screening contexts. However, a large amount of false positive (FP) alarms would inevitably lead both to an undesired possible increase in time for diagnosis, and to a reduction in radiologists' confidence in CAD as a useful tool. Most CAD systems implement as final step of the analysis a classifier which assigns a score to each entry of a list of findings; by thresholding this score it is possible to define the system performance on an annotated validation dataset in terms of a FROC curve (sensitivity vs. FP per scan). To use a CAD as a supportive tool for most clinical activities, an operative point has to be chosen on the system FROC curve, according to the obvious criterion of keeping the sensitivity as high as possible, while maintaining the number of FP alarms still acceptable. The strategy proposed in this study is to choose an operative point with high sensitivity on the CAD FROC curve, then to implement in cascade a further classification step, constituted by a smarter classifier. The key issue of this approach is that the smarter classifier is actually a meta-classifier of more then one decision system, each specialized in rejecting a particular type of FP findings generated by the CAD. The application of this approach to a dataset of 16 lung CT scans previously processed by the VBNACAD system is presented. The lung CT VBNACAD performance of 87.1% sensitivity to juxtapleural nodules with 18.5 FP per scan is improved up to 10.1 FP per scan while maintaining the same value of sensitivity. This work has been carried out in the framework of the MAGIC-V collaboration.

  9. Project Integration Architecture (PIA) and Computational Analysis Programming Interface (CAPRI) for Accessing Geometry Data from CAD Files

    NASA Technical Reports Server (NTRS)

    Benyo, Theresa L.

    2002-01-01

    Integration of a supersonic inlet simulation with a computer aided design (CAD) system is demonstrated. The integration is performed using the Project Integration Architecture (PIA). PIA provides a common environment for wrapping many types of applications. Accessing geometry data from CAD files is accomplished by incorporating appropriate function calls from the Computational Analysis Programming Interface (CAPRI). CAPRI is a CAD vendor neutral programming interface that aids in acquiring geometry data directly from CAD files. The benefits of wrapping a supersonic inlet simulation into PIA using CAPRI are; direct access of geometry data, accurate capture of geometry data, automatic conversion of data units, CAD vendor neutral operation, and on-line interactive history capture. This paper describes the PIA and the CAPRI wrapper and details the supersonic inlet simulation demonstration.

  10. Parametric Design Optimization By Integrating CAD Systems And Optimization Tools

    NASA Astrophysics Data System (ADS)

    Rehan, M.; Olabi, A. G.

    2009-11-01

    Designing a cost effective product in minimum time is a complex process. In order to achieve this goal the requirement of optimum designs are becoming more important. One of the time consuming factor in the design optimization cycle is the modifications of Computer Aided Design (CAD) model after optimization. In conventional design optimization techniques the design engineer has to update the CAD model after receiving optimum design from optimization tools. It is worthwhile using parametric design optimization process to minimize the optimization cycle time. This paper presents a comprehensive study to integrate the optimization parameters between CAD system and optimization tools which were driven from a single user environment. Finally, design optimization of a Compressed Natural Gas (CNG) cylinder was implemented as case study. In this case study the optimization tools were fully integrated with CAD system, therefore, all the deliverables including; part design, drawings and assembly can be automatically updated after achieving the optimum geometry having minimum volume and satisfying all imposed constraints.

  11. CAD Skills Increased through Multicultural Design Project

    ERIC Educational Resources Information Center

    Clemons, Stephanie

    2006-01-01

    This article discusses how students in a college-entry-level CAD course researched four generations of their family histories and documented cultural and symbolic influences within their family backgrounds. AutoCAD software was then used to manipulate those cultural and symbolic images to create the design for a multicultural area rug. AutoCAD was…

  12. Cool-and Unusual-CAD Applications

    ERIC Educational Resources Information Center

    Calhoun, Ken

    2004-01-01

    This article describes several very useful applications of AutoCAD that may lie outside the normal scope of application. AutoCAD commands used in this article are based on AutoCAD 2000I. The author and his students used a Hewlett Packard 750C DesignJet plotter for plotting. (Contains 5 figures and 5 photos.)

  13. Using AutoCAD for descriptive geometry exercises. in undergraduate structural geology

    NASA Astrophysics Data System (ADS)

    Jacobson, Carl E.

    2001-02-01

    The exercises in descriptive geometry typically utilized in undergraduate structural geology courses are quickly and easily solved using the computer drafting program AutoCAD. The key to efficient use of AutoCAD for descriptive geometry involves taking advantage of User Coordinate Systems, alternative angle conventions, relative coordinates, and other aspects of AutoCAD that may not be familiar to the beginning user. A summary of these features and an illustration of their application to the creation of structure contours for a planar dipping bed provides the background necessary to solve other problems in descriptive geometry with the computer. The ease of the computer constructions reduces frustration for the student and provides more time to think about the principles of the problems.

  14. Drafting Fundamentals. Drafting Module 1. Instructor's Guide.

    ERIC Educational Resources Information Center

    Missouri Univ., Columbia. Instructional Materials Lab.

    This Missouri Vocational Instruction Management System instructor's drafting guide has been keyed to the drafting competency profile developed by state industry and education professionals. The guide contains a cross-reference table of instructional materials. Ten units cover drafting fundamentals: (1) introduction to drafting; (2) general safety;…

  15. Understanding dental CAD/CAM for restorations--accuracy from a mechanical engineering viewpoint.

    PubMed

    Tapie, Laurent; Lebon, Nicolas; Mawussi, Bernardin; Fron-Chabouis, Hélène; Duret, Francois; Attal, Jean-Pierre

    2015-01-01

    As is the case in the field of medicine, as well as in most areas of daily life, digital technology is increasingly being introduced into dental practice. Computer-aided design/ computer-aided manufacturing (CAD/CAM) solutions are available not only for chairside practice but also for creating inlays, crowns, fixed partial dentures (FPDs), implant abutments, and other dental prostheses. CAD/CAM dental practice can be considered as the handling of devices and software processing for the almost automatic design and creation of dental restorations. However, dentists who want to use dental CAD/CAM systems often do not have enough information to understand the variations offered by such technology practice. Knowledge of the random and systematic errors in accuracy with CAD/CAM systems can help to achieve successful restorations with this technology, and help with the purchasing of a CAD/CAM system that meets the clinical needs of restoration. This article provides a mechanical engineering viewpoint of the accuracy of CAD/ CAM systems, to help dentists understand the impact of this technology on restoration accuracy. PMID:26734668

  16. Rationale for the Use of CAD/CAM Technology in Implant Prosthodontics

    PubMed Central

    Abduo, Jaafar; Lyons, Karl

    2013-01-01

    Despite the predictable longevity of implant prosthesis, there is an ongoing interest to continue to improve implant prosthodontic treatment and outcomes. One of the developments is the application of computer-aided design and computer-aided manufacturing (CAD/CAM) to produce implant abutments and frameworks from metal or ceramic materials. The aim of this narrative review is to critically evaluate the rationale of CAD/CAM utilization for implant prosthodontics. To date, CAD/CAM allows simplified production of precise and durable implant components. The precision of fit has been proven in several laboratory experiments and has been attributed to the design of implants. Milling also facilitates component fabrication from durable and aesthetic materials. With further development, it is expected that the CAD/CAM protocol will be further simplified. Although compelling clinical evidence supporting the superiority of CAD/CAM implant restorations is still lacking, it is envisioned that CAD/CAM may become the main stream for implant component fabrication. PMID:23690778

  17. Evaluation of computer-aided detection and diagnosis systemsa)

    PubMed Central

    Petrick, Nicholas; Sahiner, Berkman; Armato, Samuel G.; Bert, Alberto; Correale, Loredana; Delsanto, Silvia; Freedman, Matthew T.; Fryd, David; Gur, David; Hadjiiski, Lubomir; Huo, Zhimin; Jiang, Yulei; Morra, Lia; Paquerault, Sophie; Raykar, Vikas; Samuelson, Frank; Summers, Ronald M.; Tourassi, Georgia; Yoshida, Hiroyuki; Zheng, Bin; Zhou, Chuan; Chan, Heang-Ping

    2013-01-01

    Computer-aided detection and diagnosis (CAD) systems are increasingly being used as an aid by clinicians for detection and interpretation of diseases. Computer-aided detection systems mark regions of an image that may reveal specific abnormalities and are used to alert clinicians to these regions during image interpretation. Computer-aided diagnosis systems provide an assessment of a disease using image-based information alone or in combination with other relevant diagnostic data and are used by clinicians as a decision support in developing their diagnoses. While CAD systems are commercially available, standardized approaches for evaluating and reporting their performance have not yet been fully formalized in the literature or in a standardization effort. This deficiency has led to difficulty in the comparison of CAD devices and in understanding how the reported performance might translate into clinical practice. To address these important issues, the American Association of Physicists in Medicine (AAPM) formed the Computer Aided Detection in Diagnostic Imaging Subcommittee (CADSC), in part, to develop recommendations on approaches for assessing CAD system performance. The purpose of this paper is to convey the opinions of the AAPM CADSC members and to stimulate the development of consensus approaches and “best practices” for evaluating CAD systems. Both the assessment of a standalone CAD system and the evaluation of the impact of CAD on end-users are discussed. It is hoped that awareness of these important evaluation elements and the CADSC recommendations will lead to further development of structured guidelines for CAD performance assessment. Proper assessment of CAD system performance is expected to increase the understanding of a CAD system's effectiveness and limitations, which is expected to stimulate further research and development efforts on CAD technologies, reduce problems due to improper use, and eventually improve the utility and efficacy of CAD

  18. Tooth-colored CAD/CAM monolithic restorations.

    PubMed

    Reich, S

    2015-01-01

    A monolithic restoration (also known as a full contour restoration) is one that is manufactured from a single material for the fully anatomic replacement of lost tooth structure. Additional staining (followed by glaze firing if ceramic materials are used) may be performed to enhance the appearance of the restoration. For decades, monolithic restoration has been the standard for inlay and partial crown restorations manufactured by both pressing and computer-aided design and manufacturing (CAD/CAM) techniques. A limited selection of monolithic materials is now available for dental crown and bridge restorations. The IDS (2015) provided an opportunity to learn about and evaluate current trends in this field. In addition to new developments, established materials are also mentioned in this article to complete the picture. In line with the strategic focus of the IJCD, the focus here is naturally on CAD/CAM materials. PMID:26110926

  19. Integration of a CAD System Into an MDO Framework

    NASA Technical Reports Server (NTRS)

    Townsend, J. C.; Samareh, J. A.; Weston, R. P.; Zorumski, W. E.

    1998-01-01

    NASA Langley has developed a heterogeneous distributed computing environment, called the Framework for Inter-disciplinary Design Optimization, or FIDO. Its purpose has been to demonstrate framework technical feasibility and usefulness for optimizing the preliminary design of complex systems and to provide a working environment for testing optimization schemes. Its initial implementation has been for a simplified model of preliminary design of a high-speed civil transport. Upgrades being considered for the FIDO system include a more complete geometry description, required by high-fidelity aerodynamics and structures codes and based on a commercial Computer Aided Design (CAD) system. This report presents the philosophy behind some of the decisions that have shaped the FIDO system and gives a brief case study of the problems and successes encountered in integrating a CAD system into the FEDO framework.

  20. A Prototype of CAD/CAM Education in the Community College.

    ERIC Educational Resources Information Center

    Kimmey, James R.

    Drawing upon Elgin Community College's (ECC's) 7-year history of program development and operation, this paper demonstrates how ECC, in cooperation with Northern Illinois Industries, Computervision Corporation, Mazak Corporation, and the Society of Manufacturing Engineers, established a Computer-Aided Design and Drafting/Computer-Aided Machining…

  1. CAD/CAM at a Distance: Assessing the Effectiveness of Web-Based Instruction To Meet Workforce Development Needs. AIR 2000 Annual Forum Paper.

    ERIC Educational Resources Information Center

    Wilkerson, Joyce A.; Elkins, Susan A.

    This qualitative case study assessed web-based instruction in a computer-aided design/computer-assisted manufacturing (CAD/CAM) course designed for workforce development. The study examined students' and instructors' experience in a CAD/CAM course delivered exclusively on the Internet, evaluating course content and delivery, clarity of…

  2. Improving CAD performance by fusion of the bilateral mammographic tissue asymmetry information

    NASA Astrophysics Data System (ADS)

    Wang, Xingwei; Li, Lihua; Liu, Wei; Xu, Weidong; Lederman, Dror; Zheng, Bin

    2012-03-01

    Bilateral mammographic tissue density asymmetry could be an important factor in assessing risk of developing breast cancer and improving the detection of the suspicious lesions. This study aims to assess whether fusion of the bilateral mammographic density asymmetrical information into a computer-aided detection (CAD) scheme could improve CAD performance in detecting mass-like breast cancers. A testing dataset involving 1352 full-field digital mammograms (FFDM) acquired from 338 cases was used. In this dataset, half (169) cases are positive containing malignant masses and half are negative. Two computerized schemes were first independently applied to process FFDM images of each case. The first single-image based CAD scheme detected suspicious mass regions on each image. The second scheme detected and computed the bilateral mammographic tissue density asymmetry for each case. A fusion method was then applied to combine the output scores of the two schemes. The CAD performance levels using the original CAD-generated detection scores and the new fusion scores were evaluated and compared using a free-response receiver operating characteristic (FROC) type data analysis method. By fusion with the bilateral mammographic density asymmetrical scores, the case-based CAD sensitivity was increased from 79.2% to 84.6% at a false-positive rate of 0.3 per image. CAD also cued more "difficult" masses with lower CAD-generated detection scores while discarded some "easy" cases. The study indicated that fusion between the scores generated by a single-image based CAD scheme and the computed bilateral mammographic density asymmetry scores enabled to increase mass detection sensitivity in particular to detect more subtle masses.

  3. CAD/CAM method application for ear shell auto-manufacturing

    NASA Astrophysics Data System (ADS)

    Jarng, Soon Suck; Ting, Gao

    2010-01-01

    This paper presents the engineering technique of the rapid hearing aid production with a rapid shell modelling (RSM) Computer Aided Design/Manufacturing (CAD/CAM). It will be worthwhile to describe how the virtual ear shell designed with RSM from an ear impression. And the virtual ear shell model is then used as the template to manufacture the actual ear shell by a Rapid Production (RP) machine. Some detailed description of the whole processing will be given in this thesis. The CAD/CAM method processing will enhance and provide outstanding, high-quality hearing aid shell production capabilities to customers. It reduces the time and the cost of designing products and facilitates direct and indirect manufacturing by creating actual parts directly from digital input. It determines that this technique has made a large impact on hearing aid processing and fitting.

  4. CAD/CAM method application for ear shell auto-manufacturing

    NASA Astrophysics Data System (ADS)

    Jarng, Soon Suck; Ting, Gao

    2009-12-01

    This paper presents the engineering technique of the rapid hearing aid production with a rapid shell modelling (RSM) Computer Aided Design/Manufacturing (CAD/CAM). It will be worthwhile to describe how the virtual ear shell designed with RSM from an ear impression. And the virtual ear shell model is then used as the template to manufacture the actual ear shell by a Rapid Production (RP) machine. Some detailed description of the whole processing will be given in this thesis. The CAD/CAM method processing will enhance and provide outstanding, high-quality hearing aid shell production capabilities to customers. It reduces the time and the cost of designing products and facilitates direct and indirect manufacturing by creating actual parts directly from digital input. It determines that this technique has made a large impact on hearing aid processing and fitting.

  5. For Drafting Programs--Computer Graphics in Industrial Tech.

    ERIC Educational Resources Information Center

    Sutliff, Ron

    1980-01-01

    Posits that computer-aided drafting and design should be introduced to students in industrial technology programs. Discusses ways the technical educator can get involved in computer graphics to familiarize students with it without a large outlay of money. (JOW)

  6. Extending Engineering Design Graphics Laboratories to Have a CAD/CAM Component: Implementation Issues.

    ERIC Educational Resources Information Center

    Juricic, Davor; Barr, Ronald E.

    1996-01-01

    Reports on a project that extended the Engineering Design Graphics curriculum to include instruction and laboratory experience in computer-aided design, analysis, and manufacturing (CAD/CAM). Discusses issues in project implementation, including introduction of finite element analysis to lower-division students, feasibility of classroom prototype…

  7. Use of MathCAD in a Pharmacokinetics Course for PharmD Students.

    ERIC Educational Resources Information Center

    Sullivan, Timothy J.

    1992-01-01

    This paper describes the application of the Student Edition of MathCAD as a computational aid in an introductory graduate level pharmacokinetics course. The program allows the student to perform mathematical calculations and analysis on a computer screen. The advantages and disadvantages of this application are discussed. (GLR)

  8. Preparing for High Technology: CAD/CAM Programs. Research & Development Series No. 234.

    ERIC Educational Resources Information Center

    Abram, Robert; And Others

    This guide is one of three developed to provide information and resources to assist in planning and developing postsecondary technican training programs in high technology areas. It is specifically intended for vocational-technical educators and planners in the initial stages of planning a specialized training option in computer-aided design (CAD)…

  9. Longitudinal Study of Factors Impacting the Implementation of Notebook Computer Based CAD Instruction

    ERIC Educational Resources Information Center

    Goosen, Richard F.

    2009-01-01

    This study provides information for higher education leaders that have or are considering conducting Computer Aided Design (CAD) instruction using student owned notebook computers. Survey data were collected during the first 8 years of a pilot program requiring engineering technology students at a four year public university to acquire a notebook…

  10. Centerline-based colon segmentation for CAD of CT colonography

    NASA Astrophysics Data System (ADS)

    Näppi, Janne; Frimmel, Hans; Yoshida, Hiroyuki

    2006-03-01

    We developed a fast centerline-based segmentation (CBS) algorithm for the extraction of colon in computer-aided detection (CAD) for CT colonography (CTC). CBS calculates local centerpoints along thresholded components of abdominal air, and connects the centerpoints iteratively to yield a colon centerline. A thick region encompassing the colonic wall is extracted by use of region-growing around the centerline. The resulting colonic wall is employed in our CAD scheme for the detection of polyps, in which polyps are detected within the wall by use of volumetric shape features. False-positive detections are reduced by use of a Bayesian neural network. The colon extraction accuracy of CBS was evaluated by use of 38 clinical CTC scans representing various preparation conditions. On average, CBS covered more than 96% of the visible region of colon with less than 1% extracolonic components in the extracted region. The polyp detection performance of the CAD scheme was evaluated by use of 121 clinical cases with 42 colonoscopy-confirmed polyps 5-25 mm. At a 93% by-polyp detection sensitivity for polyps >=5 mm, a leave-one-patient-out evaluation yielded 1.4 false-positive polyp detections per CT scan.

  11. Complete-mouth rehabilitation using a 3D printing technique and the CAD/CAM double scanning method: A clinical report.

    PubMed

    Joo, Han-Sung; Park, Sang-Won; Yun, Kwi-Dug; Lim, Hyun-Pil

    2016-07-01

    According to evolving computer-aided design/computer-aided manufacturing (CAD/CAM) technology, ceramic materials such as zirconia can be used to create fixed dental prostheses for partial removable dental prostheses. Since 3D printing technology was introduced a few years ago, dental applications of this technique have gradually increased. This clinical report presents a complete-mouth rehabilitation using 3D printing and the CAD/CAM double-scanning method. PMID:26946918

  12. Teaching Computer-Aided Design of Fluid Flow and Heat Transfer Engineering Equipment.

    ERIC Educational Resources Information Center

    Gosman, A. D.; And Others

    1979-01-01

    Describes a teaching program for fluid mechanics and heat transfer which contains both computer aided learning (CAL) and computer aided design (CAD) components and argues that the understanding of the physical and numerical modeling taught in the CAL course is essential to the proper implementation of CAD. (Author/CMV)

  13. The Challenging Academic Development (CAD) Collective

    ERIC Educational Resources Information Center

    Peseta, Tai

    2005-01-01

    This article discusses the Challenging Academic Development (CAD) Collective and describes how it came out of a symposium called "Liminality, identity, and hybridity: On the promise of new conceptual frameworks for theorising academic/faculty development." The CAD Collective is and represents a space where people can open up their contexts and…

  14. Issues of a Computer-Aided Design of Hydraulic Jacks

    NASA Astrophysics Data System (ADS)

    Averchenkov, V. I.; Averchenkov, A. V.; Kolyakinand, V. V.; Orekhov, O. D.

    2016-04-01

    The article deals with the issues of a computer-aided design of hydraulic equipment, namely hydraulic jacks. Design principles of the hydraulic jack CAD system are described. In addition, the possibilities for the system improvement and expansion are considered.

  15. A CAD interface for GEANT4.

    PubMed

    Poole, C M; Cornelius, I; Trapp, J V; Langton, C M

    2012-09-01

    Often CAD models already exist for parts of a geometry being simulated using GEANT4. Direct import of these CAD models into GEANT4 however, may not be possible and complex components may be difficult to define via other means. Solutions that allow for users to work around the limited support in the GEANT4 toolkit for loading predefined CAD geometries have been presented by others, however these solutions require intermediate file format conversion using commercial software. Here within we describe a technique that allows for CAD models to be directly loaded as geometry without the need for commercial software and intermediate file format conversion. Robustness of the interface was tested using a set of CAD models of various complexity; for the models used in testing, no import errors were reported and all geometry was found to be navigable by GEANT4. PMID:22956356

  16. Increasing productivity of the McAuto CAD/CAE system by user-specific applications programming

    NASA Technical Reports Server (NTRS)

    Plotrowski, S. M.; Vu, T. H.

    1985-01-01

    Significant improvements in the productivity of the McAuto Computer-Aided Design/Computer-Aided Engineering (CAD/CAE) system were achieved by applications programming using the system's own Graphics Interactive Programming language (GRIP) and the interface capabilities with the main computer on which the system resides. The GRIP programs for creating springs, bar charts, finite element model representations and aiding management planning are presented as examples.

  17. Custom hip prostheses by integrating CAD and casting technology

    NASA Astrophysics Data System (ADS)

    Silva, Pedro F.; Leal, Nuno; Neto, Rui J.; Lino, F. Jorge; Reis, Ana

    2012-09-01

    Total Hip Arthroplasty (THA) is a surgical intervention that is being achieving high rates of success, leaving room to research on long run durability, patient comfort and costs reduction. Even so, up to the present, little research has been done to improve the method of manufacturing customized prosthesis. The common customized prostheses are made by full machining. This document presents a different approach methodology which combines the study of medical images, through CAD (Computer Aided Design) software, SLadditive manufacturing, ceramic shell manufacture, precision foundry with Titanium alloys and Computer Aided Manufacturing (CAM). The goal is to achieve the best comfort for the patient, stress distribution and the maximum lifetime of the prosthesis produced by this integrated methodology. The way to achieve this desiderate is to make custom hip prosthesis which are adapted to each patient needs and natural physiognomy. Not only the process is reliable, but also represents a cost reduction comparing to the conventional full machined custom hip prosthesis.

  18. Space crew radiation exposure analysis system based on a commercial stand-alone CAD system

    NASA Astrophysics Data System (ADS)

    Appleby, Matthew H.; Golightly, Michael J.; Hardy, Alva C.

    1992-07-01

    Major improvements have recently been completed in the approach to spacecraft shielding analysis. A Computer-Aided Design (CAD)-based system has been developed for determining the shielding provided to any point within or external to the spacecraft. Shielding analysis is performed using a commercially available stand-alone CAD system and a customized ray-tracing subroutine contained within a standard engineering modeling software package. This improved shielding analysis technique has been used in several vehicle design projects such as a Mars transfer habitat, pressurized lunar rover, and the redesigned Space Station. Results of these analyses are provided to demonstrate the applicability and versatility of the system.

  19. Space crew radiation exposure analysis system based on a commercial stand-alone CAD system

    NASA Technical Reports Server (NTRS)

    Appleby, Matthew H.; Golightly, Michael J.; Hardy, Alva C.

    1992-01-01

    Major improvements have recently been completed in the approach to spacecraft shielding analysis. A Computer-Aided Design (CAD)-based system has been developed for determining the shielding provided to any point within or external to the spacecraft. Shielding analysis is performed using a commercially available stand-alone CAD system and a customized ray-tracing subroutine contained within a standard engineering modeling software package. This improved shielding analysis technique has been used in several vehicle design projects such as a Mars transfer habitat, pressurized lunar rover, and the redesigned Space Station. Results of these analyses are provided to demonstrate the applicability and versatility of the system.

  20. Online mammographic images database for development and comparison of CAD schemes.

    PubMed

    Matheus, Bruno Roberto Nepomuceno; Schiabel, Homero

    2011-06-01

    Considering the difficulties in finding good-quality images for the development and test of computer-aided diagnosis (CAD), this paper presents a public online mammographic images database free for all interested viewers and aimed to help develop and evaluate CAD schemes. The digitalization of the mammographic images is made with suitable contrast and spatial resolution for processing purposes. The broad recuperation system allows the user to search for different images, exams, or patient characteristics. Comparison with other databases currently available has shown that the presented database has a sufficient number of images, is of high quality, and is the only one to include a functional search system. PMID:20480383

  1. Architectural Drafting. Curriculum Development. Bulletin 1779.

    ERIC Educational Resources Information Center

    Eppler, Thomas

    This teaching guide is designed to aid high school vocational education teachers in teaching a course in architectural drafting for students who plan to become architects, interior designers and decorators, architectural draftspersons, landscape engineers, building contractors, building estimators, real estate persons or appraisers, and others.…

  2. Engineering Technology Programs Courses Guide for Computer Aided Design and Computer Aided Manufacturing.

    ERIC Educational Resources Information Center

    Georgia Univ., Athens. Div. of Vocational Education.

    This guide describes the requirements for courses in computer-aided design and computer-aided manufacturing (CAD/CAM) that are part of engineering technology programs conducted in vocational-technical schools in Georgia. The guide is organized in five sections. The first section provides a rationale for occupations in design and in production,…

  3. Effect of image variation on computer-aided detection systems

    NASA Astrophysics Data System (ADS)

    Rabbani, S. P.; Maduskar, P.; Philipsen, R. H. H. M.; Hogeweg, L.; van Ginneken, B.

    2014-03-01

    As the importance of Computer Aided Detection (CAD) systems application is rising in medical imaging field due to the advantages they generate; it is essential to know their weaknesses and try to find a proper solution for them. A common possible practical problem that affects CAD systems performance is: dissimilar training and testing datasets declines the efficiency of CAD systems. In this paper normalizing images is proposed, three different normalization methods are applied on chest radiographs namely (1) Simple normalization (2) Local Normalization (3) Multi Band Local Normalization. The supervised lung segmentation CAD system performance is evaluated on normalized chest radiographs with these three different normalization methods in terms of Jaccard index. As a conclusion the normalization enhances the performance of CAD system and among these three normalization methods Local Normalization and Multi band Local normalization improve performance of CAD system more significantly than the simple normalization.

  4. Mechanical design productivity using CAD graphics - A user's point of view

    NASA Astrophysics Data System (ADS)

    Boltz, R. J.; Avery, J. T., Jr.

    1985-02-01

    The present investigation is concerned with the mechanical design productivity resulting from the use of Computer-Aided Design (CAD) graphics as a design tool. The considered studies had been conducted by a company which is involved in the design, development, and manufacture of government and defense products. Attention is given to CAD graphics for mechanical design, productivity, an overall productivity assessment, the use of CAD graphics for basic mechanical design, productivity in engineering-related areas, and an overall engineering productivity assessment. The investigation shows that there was no appreciable improvement in productivity with respect to basic mechanical design. However, rather substantial increases could be realized in productivity for engineering-related activities.

  5. Software aids plant management

    SciTech Connect

    Winiger, T. )

    1992-11-01

    This paper reports that for most utilities, computer aided engineering (CAE) systems are currently used for operating plant support rather than new plant design particularly for nuclear plant maintenance. For nuclear power generating utilities, switching to a modern, integrated CAE information system can offer significant benefits. During the last decade, however, most engineering automation in the power generation industry focused on computer-aided drafting and stand-alone engineering applications. An integrated CAE system can be a useful too, assisting engineers with many engineering and operational activities. It also can be used to manage the massive amount of information created throughout the life of a plant.

  6. Project Hill-Climb: Drafting and Design in Motion

    ERIC Educational Resources Information Center

    Crowl, William F.

    2008-01-01

    This article describes the Hill-Climb project of a second level Computer-Aided Drafting and Design (CADD) class. The author primarily designed the activity to increase student understanding of the assembly drawing process and its components. The emphasis on problem solving adds a dimension that can aid students in their other classes as well. By…

  7. TRI2SOLID: an application of reverse engineering methods to the creation of CAD models of bone segments.

    PubMed

    Viceconti, M; Zannoni, C; Pierotti, L

    1998-06-01

    For many biomechanical engineering activities it would be useful to have the three dimensional (3D) geometry of bone segments available in form of vectorial models within computer aided design (CAD) environments. In this paper a new method for the semi-automatic conversion of a stack of CT images of a femur into a CAD solid model is described. This method is relatively simple, accurate, and requires only a 3D CAD plus a few additional programs available in the public domain. The proposed method was used to convert the CT scan data set of a human femur into a valid CAD model; the resulting solid was two times more accurate than that obtained using the commonly used procedure based on 2D segmentation. PMID:9725647

  8. CADS:Cantera Aerosol Dynamics Simulator.

    SciTech Connect

    Moffat, Harry K.

    2007-07-01

    This manual describes a library for aerosol kinetics and transport, called CADS (Cantera Aerosol Dynamics Simulator), which employs a section-based approach for describing the particle size distributions. CADS is based upon Cantera, a set of C++ libraries and applications that handles gas phase species transport and reactions. The method uses a discontinuous Galerkin formulation to represent the particle distributions within each section and to solve for changes to the aerosol particle distributions due to condensation, coagulation, and nucleation processes. CADS conserves particles, elements, and total enthalpy up to numerical round-off error, in all of its formulations. Both 0-D time dependent and 1-D steady state applications (an opposing-flow flame application) have been developed with CADS, with the initial emphasis on developing fundamental mechanisms for soot formation within fires. This report also describes the 0-D application, TDcads, which models a time-dependent perfectly stirred reactor.

  9. The unstoppable progress of CAD/CAM - Results and prospects

    NASA Astrophysics Data System (ADS)

    Seifert, H.

    1982-08-01

    The state of CAD/CAM technology in the construction and machinery industries is clarified by means of a few examples using PROREN software. The use of CAD in both two-dimensional and three-dimensional design is discussed, and CAD/CAM's potential for determining control information for numerically controlled milling is assessed. The design of parts by CAD is pictorially shown.

  10. The CAD-EGS Project: Using CAD Geometrics in EGS4

    SciTech Connect

    Langeveld, Willy G.J.

    2002-03-28

    The objective of the CAD-EGS project is to provide a way to use a CAD system to create 3D geometries for use within EGS4. In this report, we describe an approach based on an intermediate file, written out by the CAD system, that is read by an EGS4 user code designed for the purpose. A prototype solution was implemented using a commonly used CAD system and the Virtual Reality Modeling Language (VRML) as an intermediate file format. We report results from the prototype, and discuss various problems arising from both the approach and the particular choices made.

  11. CAD/CAM-coupled image processing systems

    NASA Astrophysics Data System (ADS)

    Ahlers, Rolf-Juergen; Rauh, W.

    1990-08-01

    Image processing systems have found wide application in industry. For most computer integrated manufacturing faci- lities it is necessary to adapt these systems thus that they can automate the interaction with and the integration of CAD and CAM Systems. In this paper new approaches will be described that make use of the coupling of CAD and image processing as well as the automatic generation of programmes for the machining of products.

  12. Potential reasons for differences in CAD effectiveness evaluated using laboratory and clinical studies

    NASA Astrophysics Data System (ADS)

    He, Xin; Samuelson, Frank; Zeng, Rongping; Sahiner, Berkman

    2015-03-01

    Research studies have investigated a number of factors that may impact the performance assessment of computer aided detection (CAD) effectiveness, such as the inherent design of the CAD, the image and reader samples, and the assessment methods. In this study, we focused on the effect of prevalence on cue validity (co-occurrence of cue and signal) and learning as potentially important factors in CAD assessment. For example, the prevalence of cases with breast cancer is around 50% in laboratory CAD studies, which is 100 times higher than that in breast cancer screening. Although ROC is prevalence-independent, an observer's use of CAD involves tasks that are more complicated than binary classification, including: search, detection, classification, cueing and learning. We developed models to investigate the potential impact of prevalence on cue validity and the learning of cue validity tasks. We hope this work motivates new studies that investigate previously under-explored factors involved in image interpretation with a new modality in its assessment.

  13. Bridging CAGD knowledge into CAD/CG applications: Mathematical theories as stepping stones of innovations

    NASA Astrophysics Data System (ADS)

    Gobithaasan, R. U.; Miura, Kenjiro T.; Hassan, Mohamad Nor

    2014-07-01

    Computer Aided Geometric Design (CAGD) which surpasses the underlying theories of Computer Aided Design (CAD) and Computer Graphics (CG) has been taught in a number of Malaysian universities under the umbrella of Mathematical Sciences' faculty/department. On the other hand, CAD/CG is taught either under the Engineering or Computer Science Faculty. Even though CAGD researchers/educators/students (denoted as contributors) have been enriching this field of study by means of article/journal publication, many fail to convert the idea into constructive innovation due to the gap that occurs between CAGD contributors and practitioners (engineers/product/designers/architects/artists). This paper addresses this issue by advocating a number of technologies that can be used to transform CAGD contributors into innovators where immediate impact in terms of practical application can be experienced by the CAD/CG practitioners. The underlying principle of solving this issue is twofold. First would be to expose the CAGD contributors on ways to turn mathematical ideas into plug-ins and second is to impart relevant CAGD theories to CAD/CG to practitioners. Both cases are discussed in detail and the final section shows examples to illustrate the importance of turning mathematical knowledge into innovations.

  14. Integrating conventional and CAD/CAM digital techniques for establishing canine protected articulation: A clinical report.

    PubMed

    El Kerdani, Tarek; Nimmo, Arthur

    2016-05-01

    Canine protected articulation is widely accepted for patients requiring extensive oral rehabilitation. Computer-aided design and computer-aided manufacturing (CAD/CAM) restorations have been primarily designed in occlusion at the maximum intercuspal position. Designing a virtual articulator that is capable of accepting excursive occlusal records and duplicating the mandibular movements is a challenge for CAD/CAM technology. Modifying tooth shape using composite resin trial restorations to produce esthetic results and later scanning the modified teeth to create milled crowns is becoming a popular use of the CAD/CAM technology. This report describes a technique that combines conventional and CAD/CAM prosthodontic techniques for milling crowns for canine teeth that are designed to establish or improve canine protected articulation. This technique involves designing and fabricating interim restorations based on diagnostic waxing, scanning the designs intraorally, and storing them in software as pretreatment digital records. The scanned designs are then applied to the digital representation of the prepared teeth to fabricate the definitive restorations. PMID:26774319

  15. An image database management system for conducting CAD research

    NASA Astrophysics Data System (ADS)

    Gruszauskas, Nicholas; Drukker, Karen; Giger, Maryellen L.

    2007-03-01

    The development of image databases for CAD research is not a trivial task. The collection and management of images and their related metadata from multiple sources is a time-consuming but necessary process. By standardizing and centralizing the methods in which these data are maintained, one can generate subsets of a larger database that match the specific criteria needed for a particular research project in a quick and efficient manner. A research-oriented management system of this type is highly desirable in a multi-modality CAD research environment. An online, webbased database system for the storage and management of research-specific medical image metadata was designed for use with four modalities of breast imaging: screen-film mammography, full-field digital mammography, breast ultrasound and breast MRI. The system was designed to consolidate data from multiple clinical sources and provide the user with the ability to anonymize the data. Input concerning the type of data to be stored as well as desired searchable parameters was solicited from researchers in each modality. The backbone of the database was created using MySQL. A robust and easy-to-use interface for entering, removing, modifying and searching information in the database was created using HTML and PHP. This standardized system can be accessed using any modern web-browsing software and is fundamental for our various research projects on computer-aided detection, diagnosis, cancer risk assessment, multimodality lesion assessment, and prognosis. Our CAD database system stores large amounts of research-related metadata and successfully generates subsets of cases that match the user's desired search criteria.

  16. Basic Drafting. Revised.

    ERIC Educational Resources Information Center

    Schertz, Karen

    This introductory module on drafting includes the technical content and tasks necessary for a student to be employed in an entry-level drafting occupation. The module contains 18 instructional units that cover the following topics: introduction to drafting; tools and equipment; supplies and materials; sketching; scales; drawing format; lettering;…

  17. Web-based CAD and CAM for optomechatronics

    NASA Astrophysics Data System (ADS)

    Han, Min; Zhou, Hai-Guang

    2001-10-01

    CAD & CAM technologies are being used in design and manufacturing process, and are receiving increasing attention from industries and education. We have been researching to develop a new kind of software that is for web-course CAD & CAM. It can be used either in industries or in training, it is supported by IE. Firstly, we aim at CAD/CAM for optomechatronics. We have developed a kind of CAD/CAM, which is not only for mechanics but also for optics and electronic. That is a new kind of software in China. Secondly, we have developed a kind of software for web-course CAD & CAM, we introduce the basis of CAD, the commands of CAD, the programming, CAD/CAM for optomechatronics, the joint application of CAD & CAM. We introduce the functions of MasterCAM, show the whole processes of CAD/CAM/CNC by examples. Following the steps showed on the web, the trainer can not miss. CAD & CAM are widely used in many areas, development of web-course CAD & CAM is necessary for long- distance education and public education. In 1992, China raised: CAD technique, as an important part of electronic technology, is a new key technique to improve the national economic and the modernization of national defence. As so for, the education. Of CAD & CAM is mainly involved in manufacturing industry in China. But with the rapidly development of new technology, especially the development of optics and electronics, CAD & CAM will receive more attention from those areas.

  18. Performance evaluation of NASA/KSC CAD/CAE graphics local area network

    NASA Technical Reports Server (NTRS)

    Zobrist, George

    1988-01-01

    This study had as an objective the performance evaluation of the existing CAD/CAE graphics network at NASA/KSC. This evaluation will also aid in projecting planned expansions, such as the Space Station project on the existing CAD/CAE network. The objectives were achieved by collecting packet traffic on the various integrated sub-networks. This included items, such as total number of packets on the various subnetworks, source/destination of packets, percent utilization of network capacity, peak traffic rates, and packet size distribution. The NASA/KSC LAN was stressed to determine the useable bandwidth of the Ethernet network and an average design station workload was used to project the increased traffic on the existing network and the planned T1 link. This performance evaluation of the network will aid the NASA/KSC network managers in planning for the integration of future workload requirements into the existing network.

  19. Reliability of CAD CAM technology in assessing crown preparations in a preclinical dental school environment.

    PubMed

    Callan, Richard S; Blalock, John S; Cooper, Jeril R; Coleman, John F; Looney, Stephen W

    2014-01-01

    In order to use CAD CAM (Computer Aided Design, Computer Aided Manufacturing) technology as an assessment tool when evaluating the preclinical performance of dental students, it is imperative that one has confidence in the reliability of the process. In this study, a variety of alignment methods were compared to determine both the consistency and accuracy of each method. Although the "Tooth Dots Diagonal" method exhibited the best precision (coefficient of variation=5.4 percent), it also represented the least accurate method when compared to the other methods tested. Using "Small Dots Diagonal" on the gingiva appears to be the best option, exhibiting an acceptable coefficient of variation (17.6 percent) and a high degree of accuracy in terms of tolerance (mean ± standard deviation=0.163 ± 0.029). Based on the results of this study, further investigation of CAD CAM technology for the purpose of assessment and education of dental students is recommended. PMID:24385523

  20. CAD/CAM fabricated single-unit all-ceramic post–core–crown restoration

    PubMed Central

    Vinothkumar, Thilla Sekar; Kandaswamy, Deivanayagam; Chanana, Pallavi

    2011-01-01

    This case report explains about an innovative treatment strategy for the management of damaged anterior teeth with reduced incisal clearance by means of a single-unit all-ceramic post–core–crown zirconia ceramic restoration fabricated by Computer-aided designing and computer-aided manufacturing (CAD/CAM) technology. The reinforced zirconia ceramics allow fabrication of durable esthetic restorations in cases with high functional loading and the unification of the post, core, and crown in a single unit decreases the frequency of failure by creating a monobloc effect. In addition, the use of CAD/CAM technology for designing and fabricating ceramic restorations offers the option of expeditiously preparing these high-strength all-ceramic restorations. PMID:21691515

  1. Toward fast color-shaded images of CAD/CAM geometry

    NASA Astrophysics Data System (ADS)

    Sabella, P.; Wozny, M. J.

    1983-11-01

    It is pointed out that the growing demand for advanced three-dimensional (3-D) geometric modeling capabilities in mechanical CAD/CAM (Computer-Aided-Design/Computer-Aided-Manufacturing) systems is related to the need to attack complex design problems more directly and automatically. The advantages are being recognized of having an effective human-computer interface for handling complex 3-D geometry with a color-shaded image capability, in addition to a highly interactive line-drawing capability. A description is given of a software processor for rendering high-quality, color-shaded 'snapshots' directly and rapidly from commercial 3-D CAD/CAM systems. Attention is given to the importance of color-shaded images, the software processor architecture, color and illumination attributes, geometry-defining data, display type associativities, viw definition, polygonal approximation, scan conversion, and the Raster 4K rendering algorithm, and Raster4K performance.

  2. CAD-based radiation protection and shielding in space

    SciTech Connect

    Appleby, M.H.

    1991-01-01

    In the not-too-distant future, astronauts will begin living and working on space station Freedom (SSF), eventually establishing a permanent presence in space. Beyond Freedom, the National Aeronautics and Space Administration (NASA) has set its sights on returning to and eventually establishing outposts on the moon and Mars. Without appropriate methods of identifying protection deficiencies, spacecraft designers often overestimate or defer shielding solutions in both cases burdening the program. To avoid possible penalties such as increased mass, complexity, and cost, radiation analysis should be conducted as part of the preliminary design process. An innovative radiation assessment system combining computer-aided design (CAD) capabilities with established NASA transport codes has been developed permitting fast, accurate analysis of spacecraft. The use of this automated analytical tool the Boeing Radiation Exposure Model (Brem) is discussed in this paper, relative to spacecraft design and the optimization of radiation shielding. Results obtained from recently completed radiation analysis of space station Freedom are also discussed.

  3. Application of computer-aided dispatch in law enforcement: An introductory planning guide

    NASA Technical Reports Server (NTRS)

    Sohn, R. L.; Gurfield, R. M.; Garcia, E. A.; Fielding, J. E.

    1975-01-01

    A set of planning guidelines for the application of computer-aided dispatching (CAD) to law enforcement is presented. Some essential characteristics and applications of CAD are outlined; the results of a survey of systems in the operational or planning phases are summarized. Requirements analysis, system concept design, implementation planning, and performance and cost modeling are described and demonstrated with numerous examples. Detailed descriptions of typical law enforcement CAD systems, and a list of vendor sources, are given in appendixes.

  4. Reconstruction of a maxillary defect with a fibula graft and titanium mesh using CAD/CAM techniques.

    PubMed Central

    2010-01-01

    We present a case of maxillary and orbital floor reconstruction with a microvascular fibula graft and an individualized titanium mesh. Both were planned virtually; templates were made by rapid prototyping. The postoperative computertomography scans showed that the planned positions were achieved correctly. This case report illustrates maxillary reconstruction performed with a special template technique and demonstrates the possibilities of computer aided design/computer aided manufacturing (CAD/CAM) applications in reconstructive surgery. PMID:20642821

  5. cadDX Operon of Streptococcus salivarius 57.I▿

    PubMed Central

    Chen, Yi-Ywan M.; Feng, C. W.; Chiu, C. F.; Burne, Robert A.

    2008-01-01

    A CadDX system that confers resistance to Cd2+ and Zn2+ was identified in Streptococcus salivarius 57.I. Unlike with other CadDX systems, the expression of the cad promoter was negatively regulated by CadX, and the repression was inducible by Cd2+ and Zn2+, similar to what was found for CadCA systems. The lower G+C content of the S. salivarius cadDX genes suggests acquisition by horizontal gene transfer. PMID:18165364

  6. cadDX operon of Streptococcus salivarius 57.I.

    PubMed

    Chen, Yi-Ywan M; Feng, C W; Chiu, C F; Burne, Robert A

    2008-03-01

    A CadDX system that confers resistance to Cd(2+) and Zn(2+) was identified in Streptococcus salivarius 57.I. Unlike with other CadDX systems, the expression of the cad promoter was negatively regulated by CadX, and the repression was inducible by Cd(2+) and Zn(2+), similar to what was found for CadCA systems. The lower G+C content of the S. salivarius cadDX genes suggests acquisition by horizontal gene transfer. PMID:18165364

  7. Next Generation CAD/CAM/CAE Systems

    NASA Technical Reports Server (NTRS)

    Noor, Ahmed K. (Compiler); Malone, John B. (Compiler)

    1997-01-01

    This document contains presentations from the joint UVA/NASA Workshop on Next Generation CAD/CAM/CAE Systems held at NASA Langley Research Center in Hampton, Virginia on March 18-19, 1997. The presentations focused on current capabilities and future directions of CAD/CAM/CAE systems, aerospace industry projects, and university activities related to simulation-based design. Workshop attendees represented NASA, commercial software developers, the aerospace industry, government labs, and academia. The workshop objectives were to assess the potential of emerging CAD/CAM/CAE technology for use in intelligent simulation-based design and to provide guidelines for focused future research leading to effective use of CAE systems for simulating the entire life cycle of aerospace systems.

  8. CAD/CAM integration - The imperatives

    NASA Astrophysics Data System (ADS)

    Jackson, R. H.

    1985-01-01

    The assimilation of CAD/CAM capabilities into the organizational/production aspects of a manufacturing company are discussed. One company has begun the process by automating the engineering department, with all final design products subject to one vice-president's approval before being sent to the production line, which will eventually become an integrated part of the automated process. Another firm has established a CAE team within the engineering department to refine preliminary work and recommendations from other sources and fit them into manufacturing specifications. It is recommended that all managers and users be familiarized with CAD/CAM systems and that all defect-tendencies induced into people working under production pressure be anticipated and eliminated. It is emphasized that incorporating CAD/CAM into a company is as much a matter of the people involved as the technical considerations.

  9. Formal Management of CAD/CAM Processes

    NASA Astrophysics Data System (ADS)

    Kohlhase, Michael; Lemburg, Johannes; Schröder, Lutz; Schulz, Ewaryst

    Systematic engineering design processes have many aspects in common with software engineering, with CAD/CAM objects replacing program code as the implementation stage of the development. They are, however, currently considerably less formal. We propose to draw on the mentioned similarities and transfer methods from software engineering to engineering design in order to enhance in particular the reliability and reusability of engineering processes. We lay out a vision of a document-oriented design process that integrates CAD/CAM documents with requirement specifications; as a first step towards supporting such a process, we present a tool that interfaces a CAD system with program verification workflows, thus allowing for completely formalised development strands within a semi-formal methodology.

  10. An open source implementation of colon CAD in 3D slicer

    NASA Astrophysics Data System (ADS)

    Xu, Haiyong; Gage, H. Donald; Santago, Pete

    2010-03-01

    Most colon CAD (computer aided detection) software products, especially commercial products, are designed for use by radiologists in a clinical environment. Therefore, those features that effectively assist radiologists in finding polyps are emphasized in those tools. However, colon CAD researchers, many of whom are engineers or computer scientists, are working with CT studies in which polyps have already been identified using CT Colonography (CTC) and/or optical colonoscopy (OC). Their goal is to utilize that data to design a computer system that will identify all true polyps with no false positive detections. Therefore, they are more concerned with how to reduce false positives and to understand the behavior of the system than how to find polyps. Thus, colon CAD researchers have different requirements for tools not found in current CAD software. We have implemented a module in 3D Slicer to assist these researchers. As with clinical colon CAD implementations, the ability to promptly locate a polyp candidate in a 2D slice image and on a 3D colon surface is essential for researchers. Our software provides this capability, and uniquely, for each polyp candidate, the prediction value from a classifier is shown next to the 3D view of the polyp candidate, as well as its CTC/OC finding. This capability makes it easier to study each false positive detection and identify its causes. We describe features in our colon CAD system that meets researchers' specific requirements. Our system uses an open source implementation of a 3D Slicer module, and the software is available to the pubic for use and for extension (http://www2.wfubmc.edu/ctc/download/).

  11. Scaled Ellipses For Computer-Aided Design

    NASA Technical Reports Server (NTRS)

    Schembri, Anthony J.

    1990-01-01

    An addition to CAD-PACK, computer-aided design program, speeds preparation of iosmetric drawings, particularly cutaway views showing bores and threads. Consists of set of 50 scaled ellipses on detail pages of program. Designer selects ellipse, rotates it, and draws feature. Then erases reference lines on video screen.

  12. Interface Of Optical Design Programs To CAD/CAE/CAM Software

    NASA Astrophysics Data System (ADS)

    Wise, Timothy D.

    1988-06-01

    CAD/CAM systems permit the manufacture of real physical parts on a milling, or other shop, machine which has received its instructions from the design system. However, a persistent problem has been the lack of a link between the optical CAD software and the mechanical CAD software. A past paperl described software which bridges this gap by producing an Interactive Graphics Exchange Standard (IGES) file from the neutral plot files of the optical model. This IGES file can then be directly read into the mechanical drafting and design programs, ANVIL and GEOMOD. Although the latest enhancements to this older interface will be addressed, the main thrust of the paper is the description of three completely new capabilities: 1) the ability to directly read NASTRAN-generated strain data for optical surfaces into the optical design program CODE-V, 2) the direct passage of a standard lens prescription in CODE-V to the program APART for stray light analysis, and 3) the entry of mechanical drafting data directly into APART via IGES files. This last interface is particularly exciting because it allows, for the first time, completely graphical entry of structural data into an optical analysis program. A description of the typical procedures used to accomplish the transfer of data is provided along with several examples. Plans are presented to use these new software links to achieve paperless manufacture of opto-mechanical systems. Since the current algorithms have been designed with an eye on eventual improvements, an assessment of current limitations and future enhancements is also included.

  13. CAD/CAM complete dentures: a review of two commercial fabrication systems.

    PubMed

    Kattadiyil, Mathew T; Goodacre, Charles J; Baba, Nadim Z

    2013-06-01

    The use of computer-aided design and computer-aided manufacturing (CAD/CAM) has become available for complete dentures through the AvaDent and Dentca systems. AvaDent uses laser scanning and computer technology. Teeth are arranged and bases formed using proprietary software.The bases are milled from prepolymerized pucks of resin. Dentca uses computer software to produce virtual maxillary and mandibular edentulous ridges, arrange the teeth and form bases. The dentures are fabricated using a conventional processing technique. PMID:23875432

  14. Automated CAD design for sculptured airfoil surfaces

    NASA Astrophysics Data System (ADS)

    Murphy, S. D.; Yeagley, S. R.

    1990-11-01

    The design of tightly tolerated sculptured surfaces such as those for airfoils requires a significant design effort in order to machine the tools to create these surfaces. Because of the quantity of numerical data required to describe the airfoil surfaces, a CAD approach is required. Although this approach will result in productivity gains, much larger gains can be achieved by automating the design process. This paper discusses an application which resulted in an eightfold improvement in productivity by automating the design process on the CAD system.

  15. Computer Aided Design: Instructional Manual. The North Dakota High Technology Mobile Laboratory Project.

    ERIC Educational Resources Information Center

    Cheng, Wan-Lee

    This instructional manual contains 12 learning activity packets for use in a workshop in computer-aided design and drafting (CADD). The lessons cover the following topics: introduction to computer graphics and computer-aided design/drafting; coordinate systems; advance space graphics hardware configuration and basic features of the IBM PC…

  16. Web-Based Learning in the Computer-Aided Design Curriculum.

    ERIC Educational Resources Information Center

    Sung, Wen-Tsai; Ou, S. C.

    2002-01-01

    Applies principles of constructivism and virtual reality (VR) to computer-aided design (CAD) curriculum, particularly engineering, by integrating network, VR and CAD technologies into a Web-based learning environment that expands traditional two-dimensional computer graphics into a three-dimensional real-time simulation that enhances user…

  17. PACS-Based Computer-Aided Detection and Diagnosis

    NASA Astrophysics Data System (ADS)

    Huang, H. K. (Bernie); Liu, Brent J.; Le, Anh HongTu; Documet, Jorge

    The ultimate goal of Picture Archiving and Communication System (PACS)-based Computer-Aided Detection and Diagnosis (CAD) is to integrate CAD results into daily clinical practice so that it becomes a second reader to aid the radiologist's diagnosis. Integration of CAD and Hospital Information System (HIS), Radiology Information System (RIS) or PACS requires certain basic ingredients from Health Level 7 (HL7) standard for textual data, Digital Imaging and Communications in Medicine (DICOM) standard for images, and Integrating the Healthcare Enterprise (IHE) workflow profiles in order to comply with the Health Insurance Portability and Accountability Act (HIPAA) requirements to be a healthcare information system. Among the DICOM standards and IHE workflow profiles, DICOM Structured Reporting (DICOM-SR); and IHE Key Image Note (KIN), Simple Image and Numeric Report (SINR) and Post-processing Work Flow (PWF) are utilized in CAD-HIS/RIS/PACS integration. These topics with examples are presented in this chapter.

  18. Basic Drafting: A Competency-Based Guide for Students and Teachers.

    ERIC Educational Resources Information Center

    Martin, Herbert

    The instructional guide for basic drafting is designed to aid in the organization and teaching of a first year course in drafting at either the secondary or postsecondary level. The body of the document consists of a student manual which is made up of seven blocks of instruction: introduction and orientation, geometric construction, multiview…

  19. Draft Whole-Genome Sequences of 25 Salmonella enterica Strains Representing 24 Serovars

    PubMed Central

    Brumwell, Stephanie L.; Lingohr, Erika J.; Ahmad, Aaminah; Blimkie, Travis M.; Kogan, Benjamin A.; Pilsworth, Jessica; Rehman, Muhammad A.; Schleicher, Krista L.; Shanmugaraj, Jenitta; Kropinski, Andrew M.; Nash, John H. E.

    2016-01-01

    We report the draft genome sequences of 25 Salmonella enterica strains representing 24 different serotypes, many of which were not available in public repositories during our selection process. These draft genomes will provide useful reference for the genetic variation between serotypes and aid in the development of molecular typing tools. PMID:26941156

  20. From Artisanal to CAD-CAM Blocks: State of the Art of Indirect Composites.

    PubMed

    Mainjot, A K; Dupont, N M; Oudkerk, J C; Dewael, T Y; Sadoun, M J

    2016-05-01

    Indirect composites have been undergoing an impressive evolution over the last few years. Specifically, recent developments in computer-aided design-computer-aided manufacturing (CAD-CAM) blocks have been associated with new polymerization modes, innovative microstructures, and different compositions. All these recent breakthroughs have introduced important gaps among the properties of the different materials. This critical state-of-the-art review analyzes the strengths and weaknesses of the different varieties of CAD-CAM composite materials, especially as compared with direct and artisanal indirect composites. Indeed, new polymerization modes used for CAD-CAM blocks-especially high temperature (HT) and, most of all, high temperature-high pressure (HT-HP)-are shown to significantly increase the degree of conversion in comparison with light-cured composites. Industrial processes also allow for the augmentation of the filler content and for the realization of more homogeneous structures with fewer flaws. In addition, due to their increased degree of conversion and their different monomer composition, some CAD-CAM blocks are more advantageous in terms of toxicity and monomer release. Finally, materials with a polymer-infiltrated ceramic network (PICN) microstructure exhibit higher flexural strength and a more favorable elasticity modulus than materials with a dispersed filler microstructure. Consequently, some high-performance composite CAD-CAM blocks-particularly experimental PICNs-can now rival glass-ceramics, such as lithium-disilicate glass-ceramics, for use as bonded partial restorations and crowns on natural teeth and implants. Being able to be manufactured in very low thicknesses, they offer the possibility of developing innovative minimally invasive treatment strategies, such as "no prep" treatment of worn dentition. Current issues are related to the study of bonding and wear properties of the different varieties of CAD-CAM composites. There is also a crucial

  1. Automatic CAD of meniscal tears on MR imaging: a morphology-based approach

    NASA Astrophysics Data System (ADS)

    Ramakrishna, Bharath; Liu, Weimin; Safdar, Nabile; Siddiqui, Khan; Kim, Woojin; Juluru, Krishna; Chang, Chein-I.; Siegel, Eliot

    2007-03-01

    Knee-related injuries, including meniscal tears, are common in young athletes and require accurate diagnosis and appropriate surgical intervention. Although with proper technique and skill, confidence in the detection of meniscal tears should be high, this task continues to be a challenge for many inexperienced radiologists. The purpose of our study was to automate detection of meniscal tears of the knee using a computer-aided detection (CAD) algorithm. Automated segmentation of the sagittal T1-weighted MR imaging sequences of the knee in 28 patients with diagnoses of meniscal tears was performed using morphologic image processing in a 3-step process including cropping, thresholding, and application of morphological constraints. After meniscal segmentation, abnormal linear meniscal signal was extracted through a second thresholding process. The results of this process were validated by comparison with the interpretations of 2 board-certified musculoskeletal radiologists. The automated meniscal extraction algorithm process was able to successfully perform region of interest selection, thresholding, and object shape constraint tasks to produce a convex image isolating the menisci in more than 69% of the 28 cases. A high correlation was also noted between the CAD algorithm and human observer results in identification of complex meniscal tears. Our initial investigation indicates considerable promise for automatic detection of simple and complex meniscal tears of the knee using the CAD algorithm. This observation poses interesting possibilities for increasing radiologist productivity and confidence, improving patient outcomes, and applying more sophisticated CAD algorithms to orthopedic imaging tasks.

  2. Improving CAD performance by seamless insertion of pulmonary nodules in chest CT exams

    NASA Astrophysics Data System (ADS)

    Pezeshk, Aria; Sahiner, Berkman; Chen, Weijie; Petrick, Nicholas

    2015-03-01

    The availability of large medical image datasets is critical in training and testing of computer aided diagnosis (CAD) systems. However, collection of data and establishment of ground truth for medical images are both costly and difficult. To address this problem, we have developed an image composition tool that allows users to modify or supplement existing datasets by seamlessly inserting a clinical lesion extracted from a source image into a different location on a target image. In this study we focus on the application of this tool to the training of a CAD system designed to detect pulmonary nodules in chest CT. To compare the performance of a CAD system without and with the use of our image composition tool, we trained the system on two sets of data. The first training set was obtained from original CT cases, while the second set consisted of the first set plus nodules in the first set inserted into new locations. We then compared the performance of the two CAD systems in differentiating nodules from normal areas by testing each trained system against a fixed dataset containing natural nodules, and using the area under the ROC curve (AUC) as the figure of merit. The performance of the system trained with the augmented dataset was found to be significantly better than that trained with the original dataset under several training scenarios.

  3. Management of CAD/CAM information: Key to improved manufacturing productivity

    NASA Technical Reports Server (NTRS)

    Fulton, R. E.; Brainin, J.

    1984-01-01

    A key element to improved industry productivity is effective management of CAD/CAM information. To stimulate advancements in this area, a joint NASA/Navy/Industry project designated Integrated Programs for Aerospace-Vehicle Design (IPAD) is underway with the goal of raising aerospace industry productivity through advancement of technology to integrate and manage information involved in the design and manufacturing process. The project complements traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer-Aided Manufacturing (ICAM) program to advance CAM technology. IPAD research is guided by an Industry Technical Advisory Board (ITAB) composed of over 100 repesentatives from aerospace and computer companies. The IPAD accomplishments to date in development of requirements and prototype software for various levels of company-wide CAD/CAM data management are summarized and plans for development of technology for management of distributed CAD/CAM data and information required to control future knowledge-based CAD/CAM systems are discussed.

  4. True Concurrent Thermal Engineering Integrating CAD Model Building with Finite Element and Finite Difference Methods

    NASA Technical Reports Server (NTRS)

    Panczak, Tim; Ring, Steve; Welch, Mark

    1999-01-01

    Thermal engineering has long been left out of the concurrent engineering environment dominated by CAD (computer aided design) and FEM (finite element method) software. Current tools attempt to force the thermal design process into an environment primarily created to support structural analysis, which results in inappropriate thermal models. As a result, many thermal engineers either build models "by hand" or use geometric user interfaces that are separate from and have little useful connection, if any, to CAD and FEM systems. This paper describes the development of a new thermal design environment called the Thermal Desktop. This system, while fully integrated into a neutral, low cost CAD system, and which utilizes both FEM and FD methods, does not compromise the needs of the thermal engineer. Rather, the features needed for concurrent thermal analysis are specifically addressed by combining traditional parametric surface based radiation and FD based conduction modeling with CAD and FEM methods. The use of flexible and familiar temperature solvers such as SINDA/FLUINT (Systems Improved Numerical Differencing Analyzer/Fluid Integrator) is retained.

  5. CAD for 4-step braided fabric composites

    SciTech Connect

    Pandey, R.; Hahn, H.T.

    1994-12-31

    A general framework is provided to predict thermoelastic properties of three dimensional 4-step braided fabric composites. Three key steps involved are (1) the development of a CAD model for yarn architecture, (2) the extraction of a unit cell (3) the prediction of the thermoelastic properties based on micromechanics. Main features of each step are summarized and experimental correlations are provided in the paper.

  6. Use of CAD systems in design of Space Station and space robots

    NASA Technical Reports Server (NTRS)

    Dwivedi, Suren N.; Yadav, P.; Jones, Gary; Travis, Elmer W.

    1988-01-01

    The evolution of CAD systems is traced. State-of-the-art CAD systems are reviewed and various advanced CAD facilities and supplementing systems being used at NASA-Goddard are described. CAD hardware, computer software, and protocols are detailed.

  7. A CAD (Classroom Assessment Design) of a Computer Programming Course

    ERIC Educational Resources Information Center

    Hawi, Nazir S.

    2012-01-01

    This paper presents a CAD (classroom assessment design) of an entry-level undergraduate computer programming course "Computer Programming I". CAD has been the product of a long experience in teaching computer programming courses including teaching "Computer Programming I" 22 times. Each semester, CAD is evaluated and modified for the subsequent…

  8. Education and Training Packages for CAD/CAM.

    ERIC Educational Resources Information Center

    Wright, I. C.

    1986-01-01

    Discusses educational efforts in the fields of Computer Assisted Design and Manufacturing (CAD/CAM). Describes two educational training initiatives underway in the United Kingdom, one of which is a resource materials package for teachers of CAD/CAM at the undergraduate level, and the other a training course for managers of CAD/CAM systems. (TW)

  9. Rapid development of auricular prosthesis using CAD and rapid prototyping technologies.

    PubMed

    Subburaj, K; Nair, C; Rajesh, S; Meshram, S M; Ravi, B

    2007-10-01

    External ear defects can be corrected by surgery, but this may not be feasible for personal or medical reasons. Reconstructive solutions are a good alternative, but rely on the artistry and availability of the anaplastologist. A semi-automated methodology using computer-aided design (CAD) and rapid prototyping (RP) technologies was developed for auricular prosthesis development, and demonstrated in a real-life case. The correct geometry and position of the prosthesis were ensured by stacking the computed tomography scan images of the contralateral normal ear in reverse order, and joining them using a medical modelling software program. The CAD model of the remnant portion of the defective ear was subtracted from the model of the mirrored contralateral ear, using a haptic CAD system, to obtain the final geometry of the prosthesis. Polymer models were fabricated in RP systems, and used for making a corresponding mould. Medical grade silicone rubber of the appropriate colour was packed into the mould to fabricate the final ear prosthesis and fitted to the deficient side of the patient using medical grade adhesive. The computer-aided methodology gave a high level of accuracy in terms of shape, size and position of the prosthesis, and a significantly shorter lead time compared to the conventional (manual) technique. PMID:17822875

  10. Functional Drafting, Drafting--Intermediate: 9255.02.

    ERIC Educational Resources Information Center

    Dade County Public Schools, Miami, FL.

    The course consists of six instructional blocks totaling 135 clock hours: (1) functional drafting, (2) threads and fasteners, (3) pictorial drawings, (4) introduction to electronic drafting, (5) introduction to piping drafting, and (6) Quinmester posttest. Mastery of skills indicated in Drafting-Basic--9255.01 is a prerequisite. In the functional…

  11. Marginal Integrity of CAD/CAM Fixed Partial Dentures

    PubMed Central

    Rosentritt, Martin; Behr, Michael; Kolbeck, Carola; Handel, Gerhard

    2007-01-01

    Objectives Computer-aided design (CAD) and manufacturing (CAM) allows the milling of high strength zirconia fixed partial dentures (FPD), however bonding to an inert ZrO2 ceramic surface may effect the marginal integrity of the FPDs. The aim of this investigation was to evaluate the marginal adaptation of zirconia FPDs at the interfaces between zirconia, cement, and tooth. Methods 32 3-unit FPDs were fabricated of the CAD/CAM Y-TZP zirconia (Lava, 3M Espe, Germany) according to the manufacturers’ instructions. Resin cements with corresponding primer and bonding systems were used to lute the FPDs: Compolute/EBS multi (3M Espe, Germany), Panavia F/ED (Kuraray, Japan), Variolink 2/Syntac classic (Ivoclar-Vivadent, FL) and RelyX Unicem/without treatment (3M Espe, Germany). Aualloy FPDs (BioPontostar, Bego, Germany) were cemented with RelyX Unicem and Harvard (Harvard, Germany) as the control. Marginal adaptation was evaluated with scanning electron microscopy using replica specimen before and after artificial aging. After aging, microleakage tests were performed with fuchsine solution. The interfaces between cement-tooth and cement-FPD were examined. Results At the interfaces (cement-tooth and cement-FPD), the systems showed a 95% or higher perfect margin before and after aging. Only Variolink2/Syntac had a marginal adaptation, lower than a 70% perfect margin. Generally, the fuchsine penetration was below 20%, only BioPontstar/Harvard andLava/Variolink2 showed penetration results between 80% and 100%. Conclusion The success of the adhesive cementation of zirconia FPDs depends on the cement system. Under the conditions of this study, zirconia FPDs showed good to sufficient marginal integrity in combination with Panavia/ED, Compolute/EBS and RelyX Unicem. PMID:19212494

  12. CAD/CAM of braided preforms for advanced composites

    NASA Astrophysics Data System (ADS)

    Yang, Gui; Pastore, Christopher; Tsai, Yung Jia; Soebroto, Heru; Ko, Frank

    A CAD/CAM system for braiding to produce preforms for advanced textile structural composites is presented in this paper. The CAD and CAM systems are illustrated in detail. The CAD system identifies the fiber placement and orientation needed to fabricate a braided structure over a mandrel, for subsequent composite formation. The CAM system uses the design parameters generated by the CAD system to control the braiding machine. Experimental evidence demonstrating the success of combining these two technologies to form a unified CAD/CAM system for the manufacture of braided fabric preforms with complex structural shapes is presented.

  13. Basic Drafting: Book One.

    ERIC Educational Resources Information Center

    Davis, Ronald; And Others

    The first of a two-book course in drafting, this manual consists of 13 topics in the following units: introduction to drafting, general safety, basic tools and lines, major equipment, applying for a job, media, lettering, reproduction, drawing sheet layout, architect's scale usage, civil engineer's scale usage, mechanical engineer's scale usage,…

  14. Decision for the Draft.

    ERIC Educational Resources Information Center

    Chambers, John Whiteclay, II

    2002-01-01

    Discusses why U.S. President Woodrow Wilson decided to institute the military draft. Provides background information on when Wilson changed from insisting on using volunteers in the military to his resolve for instituting the draft, due to a challenge of power by former U.S. President Theodore Roosevelt. (CMK)

  15. ProperCAD: A portable object-oriented parallel environment for VLSI CAD

    NASA Technical Reports Server (NTRS)

    Ramkumar, Balkrishna; Banerjee, Prithviraj

    1993-01-01

    Most parallel algorithms for VLSI CAD proposed to date have one important drawback: they work efficiently only on machines that they were designed for. As a result, algorithms designed to date are dependent on the architecture for which they are developed and do not port easily to other parallel architectures. A new project under way to address this problem is described. A Portable object-oriented parallel environment for CAD algorithms (ProperCAD) is being developed. The objectives of this research are (1) to develop new parallel algorithms that run in a portable object-oriented environment (CAD algorithms using a general purpose platform for portable parallel programming called CARM is being developed and a C++ environment that is truly object-oriented and specialized for CAD applications is also being developed); and (2) to design the parallel algorithms around a good sequential algorithm with a well-defined parallel-sequential interface (permitting the parallel algorithm to benefit from future developments in sequential algorithms). One CAD application that has been implemented as part of the ProperCAD project, flat VLSI circuit extraction, is described. The algorithm, its implementation, and its performance on a range of parallel machines are discussed in detail. It currently runs on an Encore Multimax, a Sequent Symmetry, Intel iPSC/2 and i860 hypercubes, a NCUBE 2 hypercube, and a network of Sun Sparc workstations. Performance data for other applications that were developed are provided: namely test pattern generation for sequential circuits, parallel logic synthesis, and standard cell placement.

  16. Development of personalized annuloplasty rings: combination of CT images and CAD-CAM tools.

    PubMed

    Díaz Lantada, Andrés; Valle-Fernández, Raquel Del; Morgado, Pilar Lafont; Muñoz-García, Julio; Muñoz Sanz, José Luis; Munoz-Guijosa, Juan Manuel; Otero, Javier Echávarri

    2010-02-01

    Although the use of personalized annuloplasty rings manufactured for each patient according to the size and morphology of their valve complex could be beneficial for the treatment of mitral insufficiency, this possibility has been limited for reasons of time-lines and costs as well as for design and manufacturing difficulties, as has been the case with other personalized implant and prosthetic developments. However, the present quality of medical image capture equipment together with the benefits to be had from computer-aided design and manufacturing technologies (CAD-CAM) and the capabilities furnished by rapid prototyping technologies, present new opportunities for a personalized response to the development of implants and prostheses, the social impact of which could turn out to be highly positive. This paper sets out a personalized development of an annuloplasty ring based on the combined use of information from medical imaging, from CAD-CAM design programs and prototype manufacture using rapid prototyping technologies. PMID:19826955

  17. Clinical and Laboratory Steps for Fabricating a Complete-Arch Fixed Prosthesis Using CAD/CAM.

    PubMed

    Keerthi, Senthil; Proussaefs, Periklis; Lozada, Jaime

    2015-01-01

    The fabrication of a full-arch maxillary prosthesis has been associated with several prosthetic complications and difficulties. Even though it has been reported that phonetics, esthetics, and proper lip support are difficult to achieve, there is a scarcity in the literature regarding the clinical and laboratory procedures necessary to minimize these complications. This article provides clinical and laboratory steps that may enable the clinician to achieve more predictable restorative results when using computer-aided design/computer-assisted manufacture (CAD/CAM) to fabricate a full-arch maxillary implant-supported prosthesis. The technique presented here describes the use of an implant-retained diagnostic wax-up that is subsequently duplicated to an interim polymethylmethacrylate prosthesis using CAD/CAM before fabricating the definitive restoration. PMID:26133136

  18. Multiple platform application of 3D CAD PIC simulations in pulsed power

    SciTech Connect

    Peratt, A.L.; Mostrom, M.A.

    1995-12-31

    With the availability of 80--125 MHz microprocessors, the methodology developed for the simulation of problems in pulsed power and plasma physics on modern day supercomputers is now amenable to application on a wide range of platforms including laptops and workstations. While execution speeds with these processors do not match those of large scale computing machines, resources such as computer-aided-design (CAD) and graphical analysis codes are available to automate simulation setup and process data. This paper reports on the adaptation of IVORY, a three-dimensional, fully-electromagnetic, particle-in-cell simulation code, to this platform independent CAD environment. The primary purpose of this talk is to demonstrate how rapidly a pulsed power/plasma problem can be scoped out by an experimenter on a dedicated workstation. Demonstrations include a magnetically insulated transmission line, power flow in a graded insulator stack, a relativistic klystron oscillator, and the dynamics of a coaxial thruster for space applications.

  19. Traz - An Interactive Ray-Tracing Computer Program Integrated With A Solid-Modeling CAD System

    NASA Astrophysics Data System (ADS)

    Dolan, Ariel

    1986-02-01

    The combination of an optical ray-tracing program with a solid modeling C.A.D. (computer-aided-design) system creates a very flexible tool for optical system analysis and evaluation. The program uses the CAD data-structure and user-friendly menus for creation, manipulation and visualization of the optical system. Furthermore, it is capable of dealing with problems which are impossible or difficult to handle by existing optical design programs, such as calculations of three-dimensional sensitivities, multiple reflections, multiple-surface apertures, specular stray radiation, image rotation and complex-prism design. It can also be used as an efficient tool for error-budget and error-analysis, and can be fully interfaced with a finite-elements analysis program, thus enabling the evaluation of the effects of mechanical or thermal loads on the optical performance.

  20. IPAD 2: Advances in Distributed Data Base Management for CAD/CAM

    NASA Technical Reports Server (NTRS)

    Bostic, S. W. (Compiler)

    1984-01-01

    The Integrated Programs for Aerospace-Vehicle Design (IPAD) Project objective is to improve engineering productivity through better use of computer-aided design and manufacturing (CAD/CAM) technology. The focus is on development of technology and associated software for integrated company-wide management of engineering information. The objectives of this conference are as follows: to provide a greater awareness of the critical need by U.S. industry for advancements in distributed CAD/CAM data management capability; to present industry experiences and current and planned research in distributed data base management; and to summarize IPAD data management contributions and their impact on U.S. industry and computer hardware and software vendors.

  1. Digital breast tomosynthesis: application of 2D digital mammography CAD to detection of microcalcification clusters on planar projection image

    NASA Astrophysics Data System (ADS)

    Samala, Ravi K.; Chan, Heang-Ping; Lu, Yao; Hadjiiski, Lubomir; Wei, Jun; Helvie, Mark

    2015-03-01

    Computer-aided detection (CAD) has the potential to aid radiologists in detection of microcalcification clusters (MCs). CAD for digital breast tomosynthesis (DBT) can be developed by using the reconstructed volume, the projection views or other derivatives as input. We have developed a novel method of generating a single planar projection (PPJ) image from a regularized DBT volume to emphasize the high contrast objects such as microcalcifications while removing the anatomical background and noise. In this work, we adapted a CAD system developed for digital mammography (CADDM) to the PPJ image and compared its performance with our CAD system developed for DBT volumes (CADDBT) in the same set of cases. For microcalcification detection in the PPJ image using the CADDM system, the background removal preprocessing step designed for DM was not needed. The other methods and processing steps in the CADDM system were kept without modification while the parameters were optimized with a training set. The linear discriminant analysis classifier using cluster based features was retrained to generate a discriminant score to be used as decision variable. For view-based FROC analysis, at 80% sensitivity, an FP rate of 1.95/volume and 1.54/image were achieved, respectively, for CADDBT and CADDM in an independent test set. At a threshold of 1.2 FPs per image or per DBT volume, the nonparametric analysis of the area under the FROC curve shows that the optimized CADDM for PPJ is significantly better than CADDBT. However, the performance of CADDM drops at higher sensitivity or FP rate, resulting in similar overall performance between the two CAD systems. The higher sensitivity of the CADDM in the low FP rate region and vice versa for the CADDBT indicate that a joint CAD system combining detection in the DBT volume and the PPJ image has the potential to increase the sensitivity and reduce the FP rate.

  2. HIV / AIDS

    MedlinePlus

    ... Marketing Share this: Main Content Area Understanding HIV/AIDS AIDS was first reported in the United States in ... and has since become a major worldwide epidemic. AIDS is caused by the human immunodeficiency virus, or ...

  3. Intelligent CAD approach for modular design

    NASA Astrophysics Data System (ADS)

    Ouyang, Miao-an; Li, Chenggang; Zhong, Yifang; Yu, Jun; Zhou, Ji

    1996-03-01

    In this paper, the technology of Artificial Intelligence is introduced into a modular design and manufacturing for machine tools. The authors present a methodology to realize the modular conceptual design combined with traditional CAD, and develop an intelligent machine tools modular conceptual system. The problem-solving strategies are described in detail. The design model and system architecture are set up. Techniques and their incorporation of expert system, case-based reasoning and artificial neural networks are clarified.

  4. Anniversary Paper: History and status of CAD and quantitative image analysis: The role of Medical Physics and AAPM

    PubMed Central

    Giger, Maryellen L.; Chan, Heang-Ping; Boone, John

    2008-01-01

    The roles of physicists in medical imaging have expanded over the years, from the study of imaging systems (sources and detectors) and dose to the assessment of image quality and perception, the development of image processing techniques, and the development of image analysis methods to assist in detection and diagnosis. The latter is a natural extension of medical physicists’ goals in developing imaging techniques to help physicians acquire diagnostic information and improve clinical decisions. Studies indicate that radiologists do not detect all abnormalities on images that are visible on retrospective review, and they do not always correctly characterize abnormalities that are found. Since the 1950s, the potential use of computers had been considered for analysis of radiographic abnormalities. In the mid-1980s, however, medical physicists and radiologists began major research efforts for computer-aided detection or computer-aided diagnosis (CAD), that is, using the computer output as an aid to radiologists—as opposed to a completely automatic computer interpretation—focusing initially on methods for the detection of lesions on chest radiographs and mammograms. Since then, extensive investigations of computerized image analysis for detection or diagnosis of abnormalities in a variety of 2D and 3D medical images have been conducted. The growth of CAD over the past 20 years has been tremendous—from the early days of time-consuming film digitization and CPU-intensive computations on a limited number of cases to its current status in which developed CAD approaches are evaluated rigorously on large clinically relevant databases. CAD research by medical physicists includes many aspects—collecting relevant normal and pathological cases; developing computer algorithms appropriate for the medical interpretation task including those for segmentation, feature extraction, and classifier design; developing methodology for assessing CAD performance; validating the

  5. Anniversary Paper: History and status of CAD and quantitative image analysis: The role of Medical Physics and AAPM

    SciTech Connect

    Giger, Maryellen L.; Chan, Heang-Ping; Boone, John

    2008-12-15

    The roles of physicists in medical imaging have expanded over the years, from the study of imaging systems (sources and detectors) and dose to the assessment of image quality and perception, the development of image processing techniques, and the development of image analysis methods to assist in detection and diagnosis. The latter is a natural extension of medical physicists' goals in developing imaging techniques to help physicians acquire diagnostic information and improve clinical decisions. Studies indicate that radiologists do not detect all abnormalities on images that are visible on retrospective review, and they do not always correctly characterize abnormalities that are found. Since the 1950s, the potential use of computers had been considered for analysis of radiographic abnormalities. In the mid-1980s, however, medical physicists and radiologists began major research efforts for computer-aided detection or computer-aided diagnosis (CAD), that is, using the computer output as an aid to radiologists--as opposed to a completely automatic computer interpretation--focusing initially on methods for the detection of lesions on chest radiographs and mammograms. Since then, extensive investigations of computerized image analysis for detection or diagnosis of abnormalities in a variety of 2D and 3D medical images have been conducted. The growth of CAD over the past 20 years has been tremendous--from the early days of time-consuming film digitization and CPU-intensive computations on a limited number of cases to its current status in which developed CAD approaches are evaluated rigorously on large clinically relevant databases. CAD research by medical physicists includes many aspects--collecting relevant normal and pathological cases; developing computer algorithms appropriate for the medical interpretation task including those for segmentation, feature extraction, and classifier design; developing methodology for assessing CAD performance; validating the

  6. Anniversary paper: History and status of CAD and quantitative image analysis: the role of Medical Physics and AAPM.

    PubMed

    Giger, Maryellen L; Chan, Heang-Ping; Boone, John

    2008-12-01

    The roles of physicists in medical imaging have expanded over the years, from the study of imaging systems (sources and detectors) and dose to the assessment of image quality and perception, the development of image processing techniques, and the development of image analysis methods to assist in detection and diagnosis. The latter is a natural extension of medical physicists' goals in developing imaging techniques to help physicians acquire diagnostic information and improve clinical decisions. Studies indicate that radiologists do not detect all abnormalities on images that are visible on retrospective review, and they do not always correctly characterize abnormalities that are found. Since the 1950s, the potential use of computers had been considered for analysis of radiographic abnormalities. In the mid-1980s, however, medical physicists and radiologists began major research efforts for computer-aided detection or computer-aided diagnosis (CAD), that is, using the computer output as an aid to radiologists-as opposed to a completely automatic computer interpretation-focusing initially on methods for the detection of lesions on chest radiographs and mammograms. Since then, extensive investigations of computerized image analysis for detection or diagnosis of abnormalities in a variety of 2D and 3D medical images have been conducted. The growth of CAD over the past 20 years has been tremendous-from the early days of time-consuming film digitization and CPU-intensive computations on a limited number of cases to its current status in which developed CAD approaches are evaluated rigorously on large clinically relevant databases. CAD research by medical physicists includes many aspects-collecting relevant normal and pathological cases; developing computer algorithms appropriate for the medical interpretation task including those for segmentation, feature extraction, and classifier design; developing methodology for assessing CAD performance; validating the algorithms

  7. Ergonomics Perspective in Agricultural Research: A User-Centred Approach Using CAD and Digital Human Modeling (DHM) Technologies

    NASA Astrophysics Data System (ADS)

    Patel, Thaneswer; Sanjog, J.; Karmakar, Sougata

    2016-06-01

    Computer-aided Design (CAD) and Digital Human Modeling (DHM) (specialized CAD software for virtual human representation) technologies endow unique opportunities to incorporate human factors pro-actively in design development. Challenges of enhancing agricultural productivity through improvement of agricultural tools/machineries and better human-machine compatibility can be ensured by adoption of these modern technologies. Objectives of present work are to provide the detailed scenario of CAD and DHM applications in agricultural sector; and finding out means for wide adoption of these technologies for design and development of cost-effective, user-friendly, efficient and safe agricultural tools/equipment and operator's workplace. Extensive literature review has been conducted for systematic segregation and representation of available information towards drawing inferences. Although applications of various CAD software have momentum in agricultural research particularly for design and manufacturing of agricultural equipment/machinery, use of DHM is still at its infancy in this sector. Current review discusses about reasons of less adoption of these technologies in agricultural sector and steps to be taken for their wide adoption. It also suggests possible future research directions to come up with better ergonomic design strategies for improvement of agricultural equipment/machines and workstations through application of CAD and DHM.

  8. A new computationally efficient CAD system for pulmonary nodule detection in CT imagery.

    PubMed

    Messay, Temesguen; Hardie, Russell C; Rogers, Steven K

    2010-06-01

    Early detection of lung nodules is extremely important for the diagnosis and clinical management of lung cancer. In this paper, a novel computer aided detection (CAD) system for the detection of pulmonary nodules in thoracic computed tomography (CT) imagery is presented. The paper describes the architecture of the CAD system and assesses its performance on a publicly available database to serve as a benchmark for future research efforts. Training and tuning of all modules in our CAD system is done using a separate and independent dataset provided courtesy of the University of Texas Medical Branch (UTMB). The publicly available testing dataset is that created by the Lung Image Database Consortium (LIDC). The LIDC data used here is comprised of 84 CT scans containing 143 nodules ranging from 3 to 30mm in effective size that are manually segmented at least by one of the four radiologists. The CAD system uses a fully automated lung segmentation algorithm to define the boundaries of the lung regions. It combines intensity thresholding with morphological processing to detect and segment nodule candidates simultaneously. A set of 245 features is computed for each segmented nodule candidate. A sequential forward selection process is used to determine the optimum subset of features for two distinct classifiers, a Fisher Linear Discriminant (FLD) classifier and a quadratic classifier. A performance comparison between the two classifiers is presented, and based on this, the FLD classifier is selected for the CAD system. With an average of 517.5 nodule candidates per case/scan (517.5+/-72.9), the proposed front-end detector/segmentor is able to detect 92.8% of all the nodules in the LIDC/testing dataset (based on merged ground truth). The mean overlap between the nodule regions delineated by three or more radiologists and the ones segmented by the proposed segmentation algorithm is approximately 63%. Overall, with a specificity of 3 false positives (FPs) per case/patient on

  9. Advanced layout parameter extraction and detailed timing simulation of GaAs gate arrays in MagiCAD

    NASA Astrophysics Data System (ADS)

    Buchs, Kevin J.; Rowlands, David O.; Prentice, Jeffrey A.; Gilbert, Barry K.

    1990-10-01

    This paper discusses the features and function of three specific computer aided design tools contained in the Mayo Graphical Integrated Computer Aided Design (MagiCAD) system a complete electronic CAD software package optimized for the design and layout of semicustom (i. e. gate array) Gallium Arsenide (GaAs) integrated circuits. The first design tool the Layout Extractor processes data from placed and routed gate arrays. The Extractor verifies that the layout represents the original logic design and calculates the parasitic capacitance of the individual wiring segments in the logic nets after they have been routed. The capacitance information as calculated by the Layout Extractor is significant in GaAs work since the delay in signals traveling through the routing is often much greater than the delay of the signals traveling through the gates themselves. Once the capacitance data has been processed by the Layout Extractor it becomes available to the second CAD tool discussed here the MagiCAD timing simulation program Sting. Sting a digital event-driven simulator depends on user generation of C language-like behavioral models for all root nodes to be simulated. Through the use of delays calculated by the Extractor from the actual routing and input pin capacitances Sting assures that the entire chip design will operate correctly at the intended clock rate. The third design tool is a set of programs allowing simulation of the electromagnetic behavior of integrated circuit packages circuit

  10. Aeronautical Drafting, Drafting 3: 9257.02.

    ERIC Educational Resources Information Center

    Dade County Public Schools, Miami, FL.

    Intended for students interested in the aircraft and missile field of engineering and drafting, the course covers fundamentals, working drawings, and auxiliary views and sections that are related to this field. Considered advanced training, a prerequisite for the course is mastery of the skills indicated in Electrical and Electronic…

  11. Costs incurred by applying computer-aided design/computer-aided manufacturing techniques for the reconstruction of maxillofacial defects.

    PubMed

    Rustemeyer, Jan; Melenberg, Alex; Sari-Rieger, Aynur

    2014-12-01

    This study aims to evaluate the additional costs incurred by using a computer-aided design/computer-aided manufacturing (CAD/CAM) technique for reconstructing maxillofacial defects by analyzing typical cases. The medical charts of 11 consecutive patients who were subjected to the CAD/CAM technique were considered, and invoices from the companies providing the CAD/CAM devices were reviewed for every case. The number of devices used was significantly correlated with cost (r = 0.880; p < 0.001). Significant differences in mean costs were found between cases in which prebent reconstruction plates were used (€3346.00 ± €29.00) and cases in which they were not (€2534.22 ± €264.48; p < 0.001). Significant differences were also obtained between the costs of two, three and four devices, even when ignoring the cost of reconstruction plates. Additional fees provided by statutory health insurance covered a mean of 171.5% ± 25.6% of the cost of the CAD/CAM devices. Since the additional fees provide financial compensation, we believe that the CAD/CAM technique is suited for wide application and not restricted to complex cases. Where additional fees/funds are not available, the CAD/CAM technique might be unprofitable, so the decision whether or not to use it remains a case-to-case decision with respect to cost versus benefit. PMID:25459375

  12. Forced orthodontic extrusion and use of CAD/CAM for reconstruction of grossly destructed crown: A multidisciplinary approach.

    PubMed

    Kumar, Rahul; Patil, Suvarna

    2012-04-01

    The aim of this study is to present a report of a case where forced orthodontic extrusion and computer-aided design and computer-aided manufacturing (CAD/CAM) technique was used for reconstruction of right maxillary central incisor with grossly destructed crown. Aesthetic rehabilitation of a fractured maxillary right central incisor was performed employing a multidisciplinary approach i.e. conventional endodontic treatment followed by orthodontic extrusion and final restoration using CAD-CAM and one piece milled zirconia post and core with full coverage zirconia crown. After the procedure being completed, periapical radiographs taken at 3 month follow up period demonstrated that the post and core remained well adapted to post space and there was a complete healing of periapical lesion. This technique can provide a complete aesthetic rehabilitation of a grossly destructed tooth without hampering the biological width and thus has a better prognosis. PMID:22557823

  13. Forced orthodontic extrusion and use of CAD/CAM for reconstruction of grossly destructed crown: A multidisciplinary approach

    PubMed Central

    Kumar, Rahul; Patil, Suvarna

    2012-01-01

    The aim of this study is to present a report of a case where forced orthodontic extrusion and computer-aided design and computer-aided manufacturing (CAD/CAM) technique was used for reconstruction of right maxillary central incisor with grossly destructed crown. Aesthetic rehabilitation of a fractured maxillary right central incisor was performed employing a multidisciplinary approach i.e. conventional endodontic treatment followed by orthodontic extrusion and final restoration using CAD-CAM and one piece milled zirconia post and core with full coverage zirconia crown. After the procedure being completed, periapical radiographs taken at 3 month follow up period demonstrated that the post and core remained well adapted to post space and there was a complete healing of periapical lesion. This technique can provide a complete aesthetic rehabilitation of a grossly destructed tooth without hampering the biological width and thus has a better prognosis. PMID:22557823

  14. Model-Based Engineering and Manufacturing CAD/CAM Benchmark

    SciTech Connect

    Domm, T.D.; Underwood, R.S.

    1999-04-26

    The Benehmark Project was created from a desire to identify best practices and improve the overall efficiency and performance of the Y-12 Plant's systems and personnel supprting the manufacturing mission. The mission of the benchmark team was to search out industry leaders in manufacturing and evaluate lheir engineering practices and processes to determine direction and focus fm Y-12 modmizadon efforts. The companies visited included several large established companies and anew, small, high-tech machining firm. As a result of this efforL changes are recommended that will enable Y-12 to become a more responsive cost-effective manufacturing facility capable of suppordng the needs of the Nuclear Weapons Complex (NW@) and Work Fw Others into the 21' century. The benchmark team identified key areas of interest, both focused and gencml. The focus arm included Human Resources, Information Management, Manufacturing Software Tools, and Standarda/ Policies and Practices. Areas of general interest included Inhstructure, Computer Platforms and Networking, and Organizational Structure. The method for obtaining the desired information in these areas centered on the creation of a benchmark questionnaire. The questionnaire was used throughout each of the visits as the basis for information gathering. The results of this benchmark showed that all companies are moving in the direction of model-based engineering and manufacturing. There was evidence that many companies are trying to grasp how to manage current and legacy data. In terms of engineering design software tools, the companies contacted were using both 3-D solid modeling and surfaced Wire-frame models. The manufacturing computer tools were varie4 with most companies using more than one software product to generate machining data and none currently performing model-based manufacturing (MBM) ftom a common medel. The majority of companies were closer to identifying or using a single computer-aided design (CAD) system than a

  15. The ergonomics of computer aided design within advanced manufacturing technology.

    PubMed

    John, P A

    1988-03-01

    Many manufacturing companies have now awakened to the significance of computer aided design (CAD), although the majority of them have only been able to purchase computerised draughting systems of which only a subset produce direct manufacturing data. Such companies are moving steadily towards the concept of computer integrated manufacture (CIM), and this demands CAD to address more than draughting. CAD architects are thus having to rethink the basic specification of such systems, although they typically suffer from an insufficient understanding of the design task and have consequently been working with inadequate specifications. It is at this fundamental level that ergonomics has much to offer, making its contribution by encouraging user-centred design. The discussion considers the relationships between CAD and: the design task; the organisation and people; creativity; and artificial intelligence. It finishes with a summary of the contribution of ergonomics. PMID:15676646

  16. Evolution of Geometric Sensitivity Derivatives from Computer Aided Design Models

    NASA Technical Reports Server (NTRS)

    Jones, William T.; Lazzara, David; Haimes, Robert

    2010-01-01

    The generation of design parameter sensitivity derivatives is required for gradient-based optimization. Such sensitivity derivatives are elusive at best when working with geometry defined within the solid modeling context of Computer-Aided Design (CAD) systems. Solid modeling CAD systems are often proprietary and always complex, thereby necessitating ad hoc procedures to infer parameter sensitivity. A new perspective is presented that makes direct use of the hierarchical associativity of CAD features to trace their evolution and thereby track design parameter sensitivity. In contrast to ad hoc methods, this method provides a more concise procedure following the model design intent and determining the sensitivity of CAD geometry directly to its respective defining parameters.

  17. A constitution for AIDS.

    PubMed

    Koshy, L M

    1996-01-15

    The Indian Health Organization projected the number of deaths per day due to AIDS by the year 2000 at 10,000. An interdisciplinary international conference was held in New Delhi to draft an international law governing the issues related to AIDS. Human freedom and public health policies are the most affected by this disease. In the absence of an international AIDS law, judicial verdicts set precedents and could have serious ramifications. A participant from the John Marshall Law School, Chicago, suggested that instead of making new laws, the existing ones from the colonial past should be repealed. This includes Section 377 of the Indian Penal Code, which provides criminal sanctions against those who indulge in unnatural relations with man, woman, or animal. Penalizing homosexuality will only perpetuate clandestine relations and spread the virus into their families. Another participant seconded this motion stating that even a sex worker must be protected from abuse and indignity. The National AIDS Control Organization responded to the criticism that the government had not utilized all the World Bank funds allocated for anti-AIDS projects. The trends of the epidemic were the most important indicators not just the numbers. In Manipur and Mizoram, infection was almost entirely due to injecting drug use. The Saheli project undertaken in the red-light areas of Bombay encompassed brothel owners and prostitutes, which could be replicated in other areas. Because existing government policies were focusing on prevention, there was no protection of an HIV-infected individual's privacy, one participant from Madras stated. The confidentiality issue was also echoed by a US participant. The New Delhi Declaration and Action Plan on HIV/AIDS was also discussed. It forbids discrimination in employment, education, housing, health care, social security, travel, and marital and reproductive rights. Providing sterile needles and ensuring the safety of the blood supply were other concerns

  18. MHDL CAD tool with fault circuit handling

    NASA Astrophysics Data System (ADS)

    Espinosa Flores-Verdad, Guillermo; Altamirano Robles, Leopoldo; Osorio Roque, Leticia

    2003-04-01

    Behavioral modeling and simulation, with Analog Hardware and Mixed Signal Description High Level Languages (MHDLs), have generated the development of diverse simulation tools that allow handling the requirements of the modern designs. These systems have million of transistors embedded and they are radically diverse between them. This tendency of simulation tools is exemplified by the development of languages for modeling and simulation, whose applications are the re-use of complete systems, construction of virtual prototypes, realization of test and synthesis. This paper presents the general architecture of a Mixed Hardware Description Language, based on the standard 1076.1-1999 IEEE VHDL Analog and Mixed-Signal Extensions known as VHDL-AMS. This architecture is novel by consider the modeling and simulation of faults. The main modules of the CAD tool are briefly described in order to establish the information flow and its transformations, starting from the description of a circuit model, going throw the lexical analysis, mathematical models generation and the simulation core, ending at the collection of the circuit behavior as simulation"s data. In addition, the incorporated mechanisms to the simulation core are explained in order to realize the handling of faults into the circuit models. Currently, the CAD tool works with algebraic and differential descriptions for the circuit models, nevertheless the language design is open to be able to handle different model types: Fuzzy Models, Differentials Equations, Transfer Functions and Tables. This applies for fault models too, in this sense the CAD tool considers the inclusion of mutants and saboteurs. To exemplified the results obtained until now, the simulated behavior of a circuit is shown when it is fault free and when it has been modified by the inclusion of a fault as a mutant or a saboteur. The obtained results allow the realization of a virtual diagnosis for mixed circuits. This language works in a UNIX system

  19. Management of CAD/CAM information: Key to improved manufacturing productivity

    NASA Technical Reports Server (NTRS)

    Fulton, R. E.; Brainin, J.

    1984-01-01

    A key element to improved industry productivity is effective management of CAD/CAM information. To stimulate advancements in this area, a joint NASA/Navy/industry project designated Intergrated Programs for Aerospace-Vehicle Design (IPAD) is underway with the goal of raising aerospace industry productivity through advancement of technology to integrate and manage information involved in the design and manufacturing process. The project complements traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer-Aided Manufacturing (ICAM) program to advance CAM technology. IPAD research is guided by an Industry Technical Advisory Board (ITAB) composed of over 100 representatives from aerospace and computer companies.

  20. Coupling Photon Monte Carlo Simulation and CAD Software. Application to X-ray Nondestructive Evaluation

    NASA Astrophysics Data System (ADS)

    Tabary, J.; Glière, A.

    A Monte Carlo radiation transport simulation program, EGS Nova, and a Computer Aided Design software, BRL-CAD, have been coupled within the framework of Sindbad, a Nondestructive Evaluation (NDE) simulation system. In its current status, the program is very valuable in a NDE laboratory context, as it helps simulate the images due to the uncollided and scattered photon fluxes in a single NDE software environment, without having to switch to a Monte Carlo code parameters set. Numerical validations show a good agreement with EGS4 computed and published data. As the program's major drawback is the execution time, computational efficiency improvements are foreseen.

  1. CAD of control systems: Application of nonlinear programming to a linear quadratic formulation

    NASA Technical Reports Server (NTRS)

    Fleming, P.

    1983-01-01

    The familiar suboptimal regulator design approach is recast as a constrained optimization problem and incorporated in a Computer Aided Design (CAD) package where both design objective and constraints are quadratic cost functions. This formulation permits the separate consideration of, for example, model following errors, sensitivity measures and control energy as objectives to be minimized or limits to be observed. Efficient techniques for computing the interrelated cost functions and their gradients are utilized in conjunction with a nonlinear programming algorithm. The effectiveness of the approach and the degree of insight into the problem which it affords is illustrated in a helicopter regulation design example.

  2. Differences in computer exposure between university administrators and CAD draftsmen.

    PubMed

    Wu, Hsin-Chieh; Liu, Yung-Ping; Chen, Hsieh-Ching

    2010-10-01

    This study utilized an external logger system for onsite measurements of computer activities of two professional groups-twelve university administrators and twelve computer-aided design (CAD) draftsmen. Computer use of each participant was recorded for 10 consecutive days-an average of 7.9+/-1.8 workdays and 7.8+/-1.5 workdays for administrators and draftsmen, respectively. Quantitative parameters computed using recorded data were daily dynamic duration (DD) and static duration, daily keystrokes, mouse clicks, wheel scrolling counts, mouse movement and dragged distance, average typing and clicking rates, and average time holding down keys and mouse buttons. Significant group differences existed in the number of daily keystrokes (p<0.0005) and mouse clicks (p<0.0005), mouse distance moved (p<0.0005), typing rate (p<0.0001), daily mouse DD (p<0.0001), and keyboard DD (p<0.005). Both groups had significantly longer mouse DD than keyboard DD (p<0.0001). Statistical analysis indicates that the duration of computer use for different computer tasks cannot be represented by a single formula with same set of quantitative parameters as those associated with mouse and keyboard activities. Results of this study demonstrate that computer exposure during different tasks cannot be estimated solely by computer use duration. Quantification of onsite computer activities is necessary when determining computer-associated risk of musculoskeletal disorders. Other significant findings are discussed. PMID:20392434

  3. Learning from imbalanced data: a comparative study for colon CAD

    NASA Astrophysics Data System (ADS)

    Yang, Xiaoyun; Zheng, Yalin; Siddique, Musib; Beddoe, Gareth

    2008-03-01

    Classification plays an important role in the reduction of false positives in many computer aided detection and diagnosis methods. The difficulty of classifying polyps lies in the variation of possible polyp shapes and sizes and the imbalance between the number of polyp and non-polyp regions available in the training data. CAD schemes for medical applications demand high levels of sensitivity even at the expense of keeping a certain number of false positives. In this paper, we investigate some state-of-the-art solutions to the imbalanced data problem: Synthetic Minority Over-sampling Technique (SMOTE) and weighted Support Vector Machines (SVM). We tested these methods using a diverse database of CT colonography, which included a wide spectrum of dificult cases to detect polyps. We performed several experiments with different combinations of over-sampling techniques on training data. The results demonstrated that SVMs have achieved much better performance over C4.5 with different over-sampling techniques. Also, the results show that weighted SVM without over-sampling can achieve comparable performance in terms of sensitivity and specificity to conventional SVM combined with the over-sampling approach.

  4. Lung partitioning for x-ray CAD applications

    NASA Astrophysics Data System (ADS)

    Annangi, Pavan; Raja, Anand

    2011-03-01

    Partitioning the inside region of lung into homogeneous regions becomes a crucial step in any computer-aided diagnosis applications based on chest X-ray. The ribs, air pockets and clavicle occupy major space inside the lung as seen in the chest x-ray PA image. Segmenting the ribs and clavicle to partition the lung into homogeneous regions forms a crucial step in any CAD application to better classify abnormalities. In this paper we present two separate algorithms to segment ribs and the clavicle bone in a completely automated way. The posterior ribs are segmented based on Phase congruency features and the clavicle is segmented using Mean curvature features followed by Radon transform. Both the algorithms work on the premise that the presentation of each of these anatomical structures inside the left and right lung has a specific orientation range within which they are confined to. The search space for both the algorithms is limited to the region inside the lung, which is obtained by an automated lung segmentation algorithm that was previously developed in our group. Both the algorithms were tested on 100 images of normal and patients affected with Pneumoconiosis.

  5. CAD-CAM database management at Bendix Kansas City

    SciTech Connect

    Witte, D.R.

    1985-05-01

    The Bendix Kansas City Division of Allied Corporation began integrating mechanical CAD-CAM capabilities into its operations in June 1980. The primary capabilities include a wireframe modeling application, a solid modeling application, and the Bendix Integrated Computer Aided Manufacturing (BICAM) System application, a set of software programs and procedures which provides user-friendly access to graphic applications and data, and user-friendly sharing of data between applications and users. BICAM also provides for enforcement of corporate/enterprise policies. Three access categories, private, local, and global, are realized through the implementation of data-management metaphors: the desk, reading rack, file cabinet, and library are for the storage, retrieval, and sharing of drawings and models. Access is provided through menu selections; searching for designs is done by a paging method or a search-by-attribute-value method. The sharing of designs between all users of Part Data is key. The BICAM System supports 375 unique users per quarter and manages over 7500 drawings and models. The BICAM System demonstrates the need for generalized models, a high-level system framework, prototyping, information-modeling methods, and an understanding of the entire enterprise. Future BICAM System implementations are planned to take advantage of this knowledge.

  6. A CAD approach to magnetic bearing design

    NASA Technical Reports Server (NTRS)

    Jeyaseelan, M.; Anand, D. K.; Kirk, J. A.

    1988-01-01

    A design methodology has been developed at the Magnetic Bearing Research Laboratory for designing magnetic bearings using a CAD approach. This is used in the algorithm of an interactive design software package. The package is a design tool developed to enable the designer to simulate the entire process of design and analysis of the system. Its capabilities include interactive input/modification of geometry, finding any possible saturation at critical sections of the system, and the design and analysis of a control system that stabilizes and maintains magnetic suspension.

  7. CAD-driven microassembly and visual servoing

    SciTech Connect

    Feddema, J.T.; Simon, R.W.

    1998-03-10

    This paper describes current research and development on a robotic visual servoing system for assembly of LIGA (Lithography Galvonoforming Abforming) parts. The workcell consists of an AMTI robot, precision stage, long working distance microscope, and LIGA fabricated tweezers for picking up the parts. Fourier optics methods are used to generate synthetic microscope images from CAD drawings. These synthetic images are used off-line to test image processing routines under varying magnifications and depths of field, They also provide reference image features which are used to visually servo the part to the desired position.

  8. CAD/CAM in packaging aerospace electronics

    NASA Astrophysics Data System (ADS)

    Gargione, F.

    1980-04-01

    It is noted that hard-wired, welded circuits hold an important place in aerospace systems because they allow short production runs to be prepared quickly. However, the electronic system designs are very complicated and demanding to work on manually. The article describes a design process which saves time and effort without reducing the designer's freedom. It is shown that the CAD/CAM equipment produces all the drawings and extracts from the data needed to generate NC tapes for drilling and welding boards. In addition, it produces the artwork for etching the boards. Discussion covers the advance the system represents in cost effectiveness, versatility, and reliability.

  9. Applying a 2D based CAD scheme for detecting micro-calcification clusters using digital breast tomosynthesis images: an assessment

    NASA Astrophysics Data System (ADS)

    Park, Sang Cheol; Zheng, Bin; Wang, Xiao-Hui; Gur, David

    2008-03-01

    Digital breast tomosynthesis (DBT) has emerged as a promising imaging modality for screening mammography. However, visually detecting micro-calcification clusters depicted on DBT images is a difficult task. Computer-aided detection (CAD) schemes for detecting micro-calcification clusters depicted on mammograms can achieve high performance and the use of CAD results can assist radiologists in detecting subtle micro-calcification clusters. In this study, we compared the performance of an available 2D based CAD scheme with one that includes a new grouping and scoring method when applied to both projection and reconstructed DBT images. We selected a dataset involving 96 DBT examinations acquired on 45 women. Each DBT image set included 11 low dose projection images and a varying number of reconstructed image slices ranging from 18 to 87. In this dataset 20 true-positive micro-calcification clusters were visually detected on the projection images and 40 were visually detected on the reconstructed images, respectively. We first applied the CAD scheme that was previously developed in our laboratory to the DBT dataset. We then tested a new grouping method that defines an independent cluster by grouping the same cluster detected on different projection or reconstructed images. We then compared four scoring methods to assess the CAD performance. The maximum sensitivity level observed for the different grouping and scoring methods were 70% and 88% for the projection and reconstructed images with a maximum false-positive rate of 4.0 and 15.9 per examination, respectively. This preliminary study demonstrates that (1) among the maximum, the minimum or the average CAD generated scores, using the maximum score of the grouped cluster regions achieved the highest performance level, (2) the histogram based scoring method is reasonably effective in reducing false-positive detections on the projection images but the overall CAD sensitivity is lower due to lower signal-to-noise ratio

  10. Development of intelligent CAD/CAM systems for progressive dies

    NASA Astrophysics Data System (ADS)

    Wang, Fengyin; Xiao, Xia; Li, Jianjun

    1995-08-01

    This paper focuses on the fundamental issues related to the development of intelligent CAD/CAM systems for progressive dies which are used for manufacturing sheet metal parts in mass production. The CAD/CAM functions for sheet metal product design and those for design and manufacture of progressive dies are defined by studying the sheet-metal-product life cycle. The procedures of industrial design and manufacture of progressive dies are reviewed, and the need for intelligent CAD/CAM systems identified. The platforms, environment, and key technologies for the systems design and implementation are discussed. Finally, a prototype CAD/CAM system for progressive dies is introduced.

  11. Model-Based Engineering and Manufacturing CAD/CAM Benchmark.

    SciTech Connect

    Domm, T.C.; Underwood, R.S.

    1999-10-13

    The Benchmark Project was created from a desire to identify best practices and improve the overall efficiency and performance of the Y-12 Plant's systems and personnel supporting the manufacturing mission. The mission of the benchmark team was to search out industry leaders in manufacturing and evaluate their engineering practices and processes to determine direction and focus for Y-12 modernization efforts. The companies visited included several large established companies and a new, small, high-tech machining firm. As a result of this effort, changes are recommended that will enable Y-12 to become a more modern, responsive, cost-effective manufacturing facility capable of supporting the needs of the Nuclear Weapons Complex (NWC) into the 21st century. The benchmark team identified key areas of interest, both focused and general. The focus areas included Human Resources, Information Management, Manufacturing Software Tools, and Standards/Policies and Practices. Areas of general interest included Infrastructure, Computer Platforms and Networking, and Organizational Structure. The results of this benchmark showed that all companies are moving in the direction of model-based engineering and manufacturing. There was evidence that many companies are trying to grasp how to manage current and legacy data. In terms of engineering design software tools, the companies contacted were somewhere between 3-D solid modeling and surfaced wire-frame models. The manufacturing computer tools were varied, with most companies using more than one software product to generate machining data and none currently performing model-based manufacturing (MBM) from a common model. The majority of companies were closer to identifying or using a single computer-aided design (CAD) system than a single computer-aided manufacturing (CAM) system. The Internet was a technology that all companies were looking to either transport information more easily throughout the corporation or as a conduit for

  12. Use of CAD output to guide the intelligent display of digital mammograms

    NASA Astrophysics Data System (ADS)

    Bloomquist, Aili K.; Yaffe, Martin J.; Mawdsley, Gordon E.; Morgan, Trevor; Rico, Dan; Jong, Roberta A.

    2003-05-01

    For digital mammography to be efficient, methods are needed to choose an initial default image presentation that maximizes the amount of relevant information perceived by the radiologist and minimizes the amount of time spent adjusting the image display parameters. The purpose of this work is to explore the possibility of using the output of computer aided detection (CAD) software to guide image enhancement and presentation. A set of 16 digital mammograms with lesions of known pathology was used to develop and evaluate an enhancement and display protocol to improve the initial softcopy presentation of digital mammograms. Lesions were identified by CAD and the DICOM structured report produced by the CAD program was used to determine what enhancement algorithm should be applied in the identified regions of the image. An improved version of contrast limited adaptive histogram equalization (CLAHE) is used to enhance calcifications. For masses, the image is first smoothed using a non-linear diffusion technique; subsequently, local contrast is enhanced with a method based on morphological operators. A non-linear lookup table is automatically created to optimize the contrast in the regions of interest (detected lesions) without losing the context of the periphery of the breast. The effectiveness of the enhancement will be compared with the default presentation of the images using a forced choice preference study.

  13. A rule based computer aided design system

    NASA Technical Reports Server (NTRS)

    Premack, T.

    1986-01-01

    A Computer Aided Design (CAD) system is presented which supports the iterative process of design, the dimensional continuity between mating parts, and the hierarchical structure of the parts in their assembled configuration. Prolog, an interactive logic programming language, is used to represent and interpret the data base. The solid geometry representing the parts is defined in parameterized form using the swept volume method. The system is demonstrated with a design of a spring piston.

  14. Computer Assisted Drafting (CNC) Drawings. Drafting Module 6. Instructor's Guide.

    ERIC Educational Resources Information Center

    Missouri Univ., Columbia. Instructional Materials Lab.

    This Missouri Vocational Instruction Management System instructor's drafting guide has been keyed to the drafting competency profile developed by state industry and education professionals. This unit contains information on computer-assisted drafting drawings. The guide contains a cross-reference table of instructional materials and 20 worksheets.…

  15. Full-mouth rehabilitation with monolithic CAD/CAM-fabricated hybrid and all-ceramic materials: A case report and 3-year follow up.

    PubMed

    Selz, Christian F; Vuck, Alexander; Guess, Petra C

    2016-02-01

    Esthetic full-mouth rehabilitation represents a great challenge for clinicians and dental technicians. Computer-aided design/ computer-assisted manufacture (CAD/CAM) technology and novel ceramic materials in combination with adhesive cementation provide a reliable, predictable, and economic workflow. Polychromatic feldspathic CAD/CAM ceramics that are specifically designed for anterior indications result in superior esthetics, whereas novel CAD/CAM hybrid ceramics provide sufficient fracture resistance and adsorption of the occlusal load in posterior areas. Screw-retained monolithic CAD/CAM lithium disilicate crowns (ie, hybrid abutment crowns) represent a reliable and time- and cost-efficient prosthetic implant solution. This case report details a CAD/CAM approach to the full-arch rehabilitation of a 65-year-old patient with toothand implant-supported restorations and provides an overview of the applied CAD/CAM materials and the utilized chairside intraoral scanner. The esthetics, functional occlusion, and gingival and peri-implant tissues remained stable over a follow-up period of 3 years. No signs of fractures within the restorations were observed. PMID:26417616

  16. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication

    PubMed Central

    Bilgin, Mehmet Selim; Baytaroğlu, Ebru Nur; Erdem, Ali; Dilber, Erhan

    2016-01-01

    The aim of this review was to investigate usage of computer-aided design/computer-aided manufacture (CAD/CAM) such as milling and rapid prototyping (RP) technologies for removable denture fabrication. An electronic search was conducted in the PubMed/MEDLINE, ScienceDirect, Google Scholar, and Web of Science databases. Databases were searched from 1987 to 2014. The search was performed using a variety of keywords including CAD/CAM, complete/partial dentures, RP, rapid manufacturing, digitally designed, milled, computerized, and machined. The identified developments (in chronological order), techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication are summarized. Using a variety of keywords and aiming to find the topic, 78 publications were initially searched. For the main topic, the abstract of these 78 articles were scanned, and 52 publications were selected for reading in detail. Full-text of these articles was gained and searched in detail. Totally, 40 articles that discussed the techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication and the articles were incorporated in this review. Totally, 16 of the papers summarized in the table. Following review of all relevant publications, it can be concluded that current innovations and technological developments of CAD/CAM and RP allow the digitally planning and manufacturing of removable dentures from start to finish. As a result according to the literature review CAD/CAM techniques and supportive maxillomandibular relationship transfer devices are growing fast. In the close future, fabricating removable dentures will become medical informatics instead of needing a technical staff and procedures. However the methods have several limitations for now. PMID:27095912

  17. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication.

    PubMed

    Bilgin, Mehmet Selim; Baytaroğlu, Ebru Nur; Erdem, Ali; Dilber, Erhan

    2016-01-01

    The aim of this review was to investigate usage of computer-aided design/computer-aided manufacture (CAD/CAM) such as milling and rapid prototyping (RP) technologies for removable denture fabrication. An electronic search was conducted in the PubMed/MEDLINE, ScienceDirect, Google Scholar, and Web of Science databases. Databases were searched from 1987 to 2014. The search was performed using a variety of keywords including CAD/CAM, complete/partial dentures, RP, rapid manufacturing, digitally designed, milled, computerized, and machined. The identified developments (in chronological order), techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication are summarized. Using a variety of keywords and aiming to find the topic, 78 publications were initially searched. For the main topic, the abstract of these 78 articles were scanned, and 52 publications were selected for reading in detail. Full-text of these articles was gained and searched in detail. Totally, 40 articles that discussed the techniques, advantages, and disadvantages of CAD/CAM and RP for removable denture fabrication and the articles were incorporated in this review. Totally, 16 of the papers summarized in the table. Following review of all relevant publications, it can be concluded that current innovations and technological developments of CAD/CAM and RP allow the digitally planning and manufacturing of removable dentures from start to finish. As a result according to the literature review CAD/CAM techniques and supportive maxillomandibular relationship transfer devices are growing fast. In the close future, fabricating removable dentures will become medical informatics instead of needing a technical staff and procedures. However the methods have several limitations for now. PMID:27095912

  18. CATO: a CAD tool for intelligent design of optical networks and interconnects

    NASA Astrophysics Data System (ADS)

    Chlamtac, Imrich; Ciesielski, Maciej; Fumagalli, Andrea F.; Ruszczyk, Chester; Wedzinga, Gosse

    1997-10-01

    Increasing communication speed requirements have created a great interest in very high speed optical and all-optical networks and interconnects. The design of these optical systems is a highly complex task, requiring the simultaneous optimization of various parts of the system, ranging from optical components' characteristics to access protocol techniques. Currently there are no computer aided design (CAD) tools on the market to support the interrelated design of all parts of optical communication systems, thus the designer has to rely on costly and time consuming testbed evaluations. The objective of the CATO (CAD tool for optical networks and interconnects) project is to develop a prototype of an intelligent CAD tool for the specification, design, simulation and optimization of optical communication networks. CATO allows the user to build an abstract, possible incomplete, model of the system, and determine its expected performance. Based on design constraints provided by the user, CATO will automatically complete an optimum design, using mathematical programming techniques, intelligent search methods and artificial intelligence (AI). Initial design and testing of a CATO prototype (CATO-1) has been completed recently. The objective was to prove the feasibility of combining AI techniques, simulation techniques, an optical device library and a graphical user interface into a flexible CAD tool for obtaining optimal communication network designs in terms of system cost and performance. CATO-1 is an experimental tool for designing packet-switching wavelength division multiplexing all-optical communication systems using a LAN/MAN ring topology as the underlying network. The two specific AI algorithms incorporated are simulated annealing and a genetic algorithm. CATO-1 finds the optimal number of transceivers for each network node, using an objective function that includes the cost of the devices and the overall system performance.

  19. An information theoretic view of the scheduling problem in whole-body CAD

    NASA Astrophysics Data System (ADS)

    Zhan, Yiqiang; Zhou, Xiang Sean; Krishnan, Arun

    2008-03-01

    Emerging whole-body imaging technologies push computer aided detection/diagnosis (CAD) to scale up to a whole-body level, which involves multiple organs or anatomical structure. To be exploited in this paper is the fact that the various tasks in whole-body CAD are often highly dependent (e.g., the localization of the femur heads strongly predicts the position of the iliac bifurcation of the aorta). One way to effectively employ task dependency is to schedule the tasks such that outputs of some tasks are used to guide the others. In this sense, optimal task scheduling is key to improve overall performance of a whole-body CAD system. In this paper, we propose a method for task scheduling that is optimal in an information-theoretic sense. The central idea is to schedule tasks in such an order that each operation achieves maximum expected information gain over all the tasks. The formulation embeds two intuitive principles: (1) a task with higher confidence tends to be scheduled earlier; (2) a task with higher predictive power for other tasks tends to be scheduled earlier. More specifically, task dependency is modeled by conditional probability; the outcome of each task is assumed to be probabilistic as well; and the objective function is based on the reduction of the summed conditional entropy over all tasks. The validation is carried out on a challenging CAD problem, multi-organ localization in whole-body CT. Compared to unscheduled and ad hoc scheduled organ detection/localization, our scheduled execution achieves higher accuracy with much less computation time.

  20. Hearing Aids

    MedlinePlus

    ... more in both quiet and noisy situations. Hearing aids help people who have hearing loss from damage ... your doctor. There are different kinds of hearing aids. They differ by size, their placement on or ...

  1. AIDS (image)

    MedlinePlus

    AIDS (acquired immune deficiency syndrome) is caused by HIV (human immunodeficiency virus), and is a syndrome that ... life-threatening illnesses. There is no cure for AIDS, but treatment with antiviral medication can suppress symptoms. ...

  2. Assessment of Chair-side Computer-Aided Design and Computer-Aided Manufacturing Restorations: A Review of the Literature

    PubMed Central

    Baroudi, Kusai; Ibraheem, Shukran Nasser

    2015-01-01

    Background: This paper aimed to evaluate the application of computer-aided design and computer-aided manufacturing (CAD-CAM) technology and the factors that affect the survival of restorations. Materials and Methods: A thorough literature search using PubMed, Medline, Embase, Science Direct, Wiley Online Library and Grey literature were performed from the year 2004 up to June 2014. Only relevant research was considered. Results: The use of chair-side CAD/CAM systems is promising in all dental branches in terms of minimizing time and effort made by dentists, technicians and patients for restoring and maintaining patient oral function and aesthetic, while providing high quality outcome. Conclusion: The way of producing and placing the restorations made with the chair-side CAD/CAM (CEREC and E4D) devices is better than restorations made by conventional laboratory procedures. PMID:25954082

  3. Hearing Aids

    MedlinePlus

    ... type and degree of loss. Are there different styles of hearing aids? Styles of hearing aids Source: NIH/NIDCD Behind-the- ... the ear canal and are available in two styles. The in-the-canal (ITC) hearing aid is ...

  4. 77 FR 2543 - Upromise, Inc.; Analysis of Proposed Consent Order to Aid Public Comment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-18

    ... Upromise, Inc.; Analysis of Proposed Consent Order to Aid Public Comment AGENCY: Federal Trade Commission.... The attached Analysis to Aid Public Comment describes both the allegations in the draft complaint and... public record for a period of thirty (30) days. The following Analysis to Aid Public Comment...

  5. 76 FR 26729 - Ceridian Corporation; Analysis of Proposed Consent Order to Aid Public Comment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-09

    ... Ceridian Corporation; Analysis of Proposed Consent Order to Aid Public Comment AGENCY: Federal Trade.... The attached Analysis to Aid Public Comment describes both the allegations in the draft complaint and... public record for a period of thirty (30) days. The following Analysis to Aid Public Comment...

  6. 78 FR 13673 - HTC America, Inc.; Analysis of Proposed Consent Order To Aid Public Comment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-28

    ... America, Inc.; Analysis of Proposed Consent Order To Aid Public Comment AGENCY: Federal Trade Commission.... The attached Analysis To Aid Public Comment describes both the allegations in the draft complaint and... Aid Public Comment describes the terms of the consent agreement, and the allegations in the...

  7. 78 FR 55717 - TRENDnet, Inc.; Analysis of Proposed Consent Order To Aid Public Comment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-11

    ... TRENDnet, Inc.; Analysis of Proposed Consent Order To Aid Public Comment AGENCY: Federal Trade Commission.... The attached Analysis to Aid Public Comment describes both the allegations in the draft complaint and... record for a period of thirty (30) days. The following Analysis to Aid Public Comment describes the...

  8. 77 FR 28388 - Myspace, LLC; Analysis of Proposed Consent Order To Aid Public Comment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-14

    ... Myspace, LLC; Analysis of Proposed Consent Order To Aid Public Comment AGENCY: Federal Trade Commission.... The attached Analysis to Aid Public Comment describes both the allegations in the draft complaint and... public record for a period of thirty (30) days. The following Analysis to Aid Public Comment...

  9. 76 FR 18762 - Google, Inc.; Analysis of Proposed Consent Order To Aid Public Comment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-05

    ... Google, Inc.; Analysis of Proposed Consent Order To Aid Public Comment AGENCY: Federal Trade Commission.... The attached Analysis to Aid Public Comment describes both the allegations in the draft complaint and... record for a period of thirty (30) days. The following Analysis to Aid Public Comment describes the...

  10. 75 FR 37806 - Twitter, Inc.; Analysis of Proposed Consent Order to Aid Public Comment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-30

    ... Twitter, Inc.; Analysis of Proposed Consent Order to Aid Public Comment AGENCY: Federal Trade Commission.... The attached Analysis to Aid Public Comment describes both the allegations in the draft complaint and... period of thirty (30) days. The following Analysis to Aid Public Comment describes the terms of...

  11. 78 FR 300 - IDEXX Laboratories, Inc.; Analysis of Proposed Consent Order To Aid Public Comment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-03

    ... IDEXX Laboratories, Inc.; Analysis of Proposed Consent Order To Aid Public Comment AGENCY: Federal Trade.... The attached Analysis to Aid Public Comment describes both the allegations in the draft complaint and... period of thirty (30) days. The following Analysis to Aid Public Comment describes the terms of...

  12. A MathCAD Exploration: Hunting for Hidden Roots.

    ERIC Educational Resources Information Center

    Levy, Benjamin N.

    1990-01-01

    Discussed is the use of a program called MathCAD which allows students to solve higher order polynomial equations and geometry problems. The use of cooperative learning is emphasized. Included are graphs and part of a printout generated while solving problems with MathCAD. (KR)

  13. Making a Case for CAD in the Curriculum.

    ERIC Educational Resources Information Center

    Threlfall, K. Denise

    1995-01-01

    Computer-assisted design (CAD) technology is transforming the apparel industry. Students of fashion merchandising and clothing design must be prepared on state-of-the-art equipment. ApparelCAD software is one example of courseware for instruction in pattern design and production. (SK)

  14. Teach CAD and Measuring Skills through Reverse Engineering

    ERIC Educational Resources Information Center

    Board, Keith

    2012-01-01

    This article describes a reverse engineering activity that gives students hands-on, minds-on experience with measuring tools, machine parts, and CAD. The author developed this activity to give students an abundance of practical experience with measuring tools. Equally important, it provides a good interface between the virtual world of CAD 3D…

  15. From Bad to CAD: Maintaining Records of Maintenance Projects.

    ERIC Educational Resources Information Center

    Shea, Diane C.

    1994-01-01

    A computer-assisted design (CAD) software program is used in a Connecticut school district to graphically provide information on maintenance projects by school and category of project over time. CAD supplies a computerized building plan, a "foot-print," used as a recordkeeping system for maintenance projects. (MLF)

  16. Evaluating the Learning Process of Mechanical CAD Students

    ERIC Educational Resources Information Center

    Hamade, R. F.; Artail, H. A.; Jaber, M. Y.

    2007-01-01

    There is little theoretical or experimental research on how beginner-level trainees learn CAD skills in formal training sessions. This work presents findings on how trainees develop their skills in utilizing a solid mechanical CAD tool (Pro/Engineer version 2000i[squared] and later version Wildfire). Exercises at the beginner and intermediate…

  17. Biochemical and Genetic Characterization of Three Switchgrass CADs

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Lignin content of switchgrass (Panicum virgatum L.) cell walls is a negative trait for conversion of biomass into liquid fuels. One of the key enzymes in lignin biosynthesis is cinnamyl alcohol dehydrogenase (CAD). In this study, we have shown that CAD activity and protein levels decrease minimall...

  18. Practical CAD/CAM aspects of CNC prepreg cutting

    NASA Astrophysics Data System (ADS)

    Connolly, Michael L.

    1991-01-01

    The use of CAD/CAM in cutting large quantities of complex shapes out of prepregs is addressed. The advantages of CAD/CAM includes reduction of prototype cycles from weeks to days, improved part quality resulting from accurately cut plies, safer and more efficient cutting operations, and lower direct labor costs.

  19. Fracture Rates and Lifetime Estimations of CAD/CAM All-ceramic Restorations.

    PubMed

    Belli, R; Petschelt, A; Hofner, B; Hajtó, J; Scherrer, S S; Lohbauer, U

    2016-01-01

    The gathering of clinical data on fractures of dental restorations through prospective clinical trials is a labor- and time-consuming enterprise. Here, we propose an unconventional approach for collecting large datasets, from which clinical information on indirect restorations can be retrospectively analyzed. The authors accessed the database of an industry-scale machining center in Germany and obtained information on 34,911 computer-aided design (CAD)/computer-aided manufacturing (CAM) all-ceramic posterior restorations. The fractures of bridges, crowns, onlays, and inlays fabricated from different all-ceramic systems over a period of 3.5 y were reported by dentists and entered in the database. Survival analyses and estimations of future life revealed differences in performance among ZrO2-based restorations and lithium disilicate and leucite-reinforced glass-ceramics. PMID:26428908

  20. Marginal fit of anterior 3-unit fixed partial zirconia restorations using different CAD/CAM systems

    PubMed Central

    Song, Tae-Jin; Kwon, Taek-Ka; Han, Jung-Suk; Lee, Jai-Bong; Kim, Sung-Hun

    2013-01-01

    PURPOSE Few studies have investigated the marginal accuracy of 3-unit zirconia fixed partial dentures (FPDs) fabricated by computer-aided design/computer-aided manufacturing (CAD/CAM) system. The purpose of this study was to compare the marginal fit of zirconia FPDs made using two CAD/CAM systems with that of metal-ceramic FPDs. MATERIALS AND METHODS Artificial resin maxillary central and lateral incisors were prepared for 3-unit FPDs and fixed in yellow stone. This model was duplicated to epoxy resin die. On the resin die, 15 three-unit FPDs were fabricated per group (45 in total): Group A, zirconia 3-unit FPDs made with the Everest system; Group B, zirconia 3-unit FPDs made with the Lava system; and Group C, metal-ceramic 3-unit FPDs. They were cemented to resin dies with resin cement. After removal of pontic, each retainer was separated and observed under a microscope (Presize 440C). Marginal gaps of experimental groups were analyzed using one-way ANOVA and Duncan test. RESULTS Mean marginal gaps of 3-unit FPDs were 60.46 µm for the Everest group, 78.71 µm for the Lava group, and 81.32 µm for the metal-ceramic group. The Everest group demonstrated significantly smaller marginal gap than the Lava and the metal-ceramic groups (P<.05). The marginal gap did not significantly differ between the Lava and the metal-ceramic groups (P>.05). CONCLUSION The marginal gaps of anterior 3-unit zirconia FPD differed according to CAD/CAM systems, but still fell within clinically acceptable ranges compared with conventional metal-ceramic restoration. PMID:24049561

  1. Effects of offset values for artificial teeth positions in CAD/CAM complete denture.

    PubMed

    Yamamoto, Shinta; Kanazawa, Manabu; Iwaki, Maiko; Jokanovic, Ana; Minakuchi, Shunsuke

    2014-09-01

    Recently, computer-aided design/computer-aided manufacturing (CAD/CAM) technology has been applied to the field of removable complete denture prosthodontics. We developed a system for fabricating complete dentures applying CAD/CAM technology. In this system, artificial teeth were bonded to the recesses of a milled denture base. However, the offset values needed for the recesses are not known. The purpose of the present study was to evaluate the accuracy of bonded artificial teeth positions in 0.00 (control), 0.10, 0.15, 0.20, and 0.25mm offset recess groups. Four types of artificial teeth, upper left central incisor (UL1), upper left canine (UL3), upper left first premolar (UL4), and upper left first molar (UL6), were used. Each type of artificial tooth was arranged at regular intervals on the denture base model with the CAD software. These data were defined as the master data. The artificial teeth parts were subtracted from the denture base model by Boolean logic operations in order to make recesses, and the recesses were then offset in five values. Based on these denture base data, prepolymerized resin blocks were milled (n=3). After bonding artificial teeth on the milled denture base model, a cone beam computed tomography (CBCT) scan was performed to obtain scanned data. Deviations between the master data and the scanned data were calculated. Based on the results, the optimal offset values were found to be 0.15-0.25mm for UL1, 0.15 and 0.25mm for UL3, 0.25mm for UL4, and 0.10-0.25mm for UL6. PMID:24981734

  2. CAD-CAM printed circuit board design

    NASA Astrophysics Data System (ADS)

    Agy, W. E.

    A step-by-step procedure for a printed circuit design achieved by CAD is presented. The operator at the interactive CRT station moves a stylus across a graphics tablet and intersperses commands which result in computer-generated pictorial forms on the screen that were drawn on the pad. Standard symbols are used for commands allowing, for instance, connections to be made of specific types in certain locations, which can be automatically edited from a materials list. An entire network of drawn lines can be referenced by a signal name for recall, and a finished circuit schematic can be checked for designs rules compliance, including fault reporting in terms of designator/pin number. A map may be present delineating the boundaries of the circuitry area, and previously completed circuitry segments can be recalled for piece-by-piece assembly of the circuit board.

  3. Using CAD software to simulate PV energy yield - The case of product integrated photovoltaic operated under indoor solar irradiation

    SciTech Connect

    Reich, N.H.; van Sark, W.G.J.H.M.; Turkenburg, W.C.; Sinke, W.C.

    2010-08-15

    In this paper, we show that photovoltaic (PV) energy yields can be simulated using standard rendering and ray-tracing features of Computer Aided Design (CAD) software. To this end, three-dimensional (3-D) sceneries are ray-traced in CAD. The PV power output is then modeled by translating irradiance intensity data of rendered images back into numerical data. To ensure accurate results, the solar irradiation data used as input is compared to numerical data obtained from rendered images, showing excellent agreement. As expected, also ray-tracing precision in the CAD software proves to be very high. To demonstrate PV energy yield simulations using this innovative concept, solar radiation time course data of a few days was modeled in 3-D to simulate distributions of irradiance incident on flat, single- and double-bend shapes and a PV powered computer mouse located on a window sill. Comparisons of measured to simulated PV output of the mouse show that also in practice, simulation accuracies can be very high. Theoretically, this concept has great potential, as it can be adapted to suit a wide range of solar energy applications, such as sun-tracking and concentrator systems, Building Integrated PV (BIPV) or Product Integrated PV (PIPV). However, graphical user interfaces of 'CAD-PV' software tools are not yet available. (author)

  4. An approach to biomimetics: the natural CAD/CAM restoration: a clinical report.

    PubMed

    Schlichting, Luís Henrique; Schlichting, Kathryn Klemz; Stanley, Kyle; Magne, Michel; Magne, Pascal

    2014-02-01

    Those in the dental field have always pursued the perfect dental material for the treatment of compromised teeth. Gold, amalgam, composite resin, glass ionomer, and porcelain have been used. Tooth-like restorative materials (composite resin and porcelain) combined with an effective hard tissue bond have met the growing demand for esthetic or metal-free restorations in the past 15 to 20 years. However, none of those materials can fully mimic the unique properties of dentin (compliance and crack-stopping behavior) and enamel (wear resistance, function). The aim of this article is to report the restoration of an extensively damaged tooth with a natural restoration obtained by milling an extracted third molar tooth with a computer-aided design and computer-aided manufacturing (CAD/CAM) system. The main benefit of this novel technique is the replacement of lost tissues by actual enamel and dentin, with the potential to recover mechanical, esthetic, and biologic properties. The indication for extracting third molars and premolars because of impaction or for orthodontic reasons makes these posterior teeth readily available. The innovation of the method presented here is the optimal use of the extracted tooth substrate thanks to its positioning technique in the CAD/CAM milling chamber. PMID:24355511

  5. Luting of CAD/CAM ceramic inlays: direct composite versus dual-cure luting cement.

    PubMed

    Kameyama, Atsushi; Bonroy, Kim; Elsen, Caroline; Lührs, Anne-Katrin; Suyama, Yuji; Peumans, Marleen; Van Meerbeek, Bart; De Munck, Jan

    2015-01-01

    The aim of this study was to investigate bonding effectiveness in direct restorations. A two-step self-etch adhesive and a light-cure resin composite was compared with luting with a conventional dual-cure resin cement and a two-step etch and rinse adhesive. Class-I box-type cavities were prepared. Identical ceramic inlays were designed and fabricated with a computer-aided design/computer-aided manufacturing (CAD/CAM) device. The inlays were seated with Clearfil SE Bond/Clearfil AP-X (Kuraray Medical) or ExciTE F DSC/Variolink II (Ivoclar Vivadent), each by two operators (five teeth per group). The inlays were stored in water for one week at 37°C, whereafter micro-tensile bond strength testing was conducted. The micro-tensile bond strength of the direct composite was significantly higher than that from conventional luting, and was independent of the operator (P<0.0001). Pre-testing failures were only observed with the conventional method. High-power light-curing of a direct composite may be a viable alternative to luting lithium disilicate glass-ceramic CAD/CAM restorations. PMID:26407114

  6. Comparative study of flexural strength test methods on CAD/CAM Y-TZP dental ceramics

    PubMed Central

    Xu, Yongxiang; Han, Jianmin; Lin, Hong; An, Linan

    2015-01-01

    Clinically, fractures are the main cause of computer-aided design and computer-aided manufacturing (CAD/CAM) 3 mol%-yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) all-ceramic dental restorations failure because of repetitive occlusal loading. The goal of this work is to study the effect of test methods and specimen’s size on the flexural strength of five ceramic products. Both bi-axial flexure test (BI) and uni-axial flexure tests (UNI), including three-point flexure test (3PF) and four-point flexure test (4PF), are used in this study. For all five products, the flexural strength is as follows: BI > 3PF > 4PF. Furthermore, specimens with smaller size (3PF-s) have higher values than the bigger ones (3PF). The difference between BI and UNI resulted from the edge flaws in ceramic specimens. The relationship between different UNI (including 3PF-s, 3PF and 4PF) can be explained according to Weibull statistical fracture theory. BI is recommended to evaluate the flexural strength of CAD/CAM Y-TZP dental ceramics. PMID:26816646

  7. Leadless chip carrier packaging and CAD/CAM-supported wire wrap interconnect technology for subnanosecond ECL

    NASA Astrophysics Data System (ADS)

    Gilbert, B. K.

    1981-11-01

    This report describes the results of work conducted to develop rapid methods for designing and prototyping high-speed digital processor systems using subnanosecond emitter coupled logic (ECL). In Task I, we have begun a conversion of the design rules, interconnection protocols, special components, and standard logic panels developed during the first year for high-speed ECL-based digital processors from a technology based upon dual-in-line packages (DIP) to a technology based upon specially designed leadless ceramic chip carriers. This conversion was undertaken since it was learned during the first year that the DIP packages themselves are compromising the maximum performance levels of which the ECL dice are capable. We have also undertaken an extensive investigation of several possible approaches to increasing these operational maxima to an even greater extent than with our present design for new Leadless Ceramic Chip Carriers. Task 2 was to continue development of a comprehensive computer-aided design/computer-aided manufacturing (CAD/CAM) software package which would be specifically tailored to support the peculiar design requirements of processors operating in a high clock rate, transmission line environment. The CAD/CAM software package has been structured to be sufficiently flexible to assimilate advances in device and component technology, and to accept new sets of design rules resulting from advances in engineering design practice.

  8. Apex radicis dentis excision operation guided by template made by CAD/CAM

    PubMed Central

    He, Zong-Lai; Cai, Su-Qing; Jin, Guang-Sheng; Liu, Yun-Feng

    2015-01-01

    Objective: The aim of the study is to explore the clinical efficacy of apex radicis dentis excision guided by a template made by Computer Aided Design/Computer Aided Manufacture (CAD/CAM). Methods: Base on the CBCT image of oral cavity, a three-dimensional model of patient’s oral cavity was built. Then the access way and excisional area were defined based on the model. Finally, the operative guide template was designed and made to help define the direction, depth, and area of the surgery. Results: One year after the operation with guide template, the two cases of apex radicis dentis with difficulty in cure were proven to have normal masticatory function and their pathological changes of apex radicis dentis disappeared as well. Conclusion: Utilization of CAD/CAM technology could well design the operative guide template for the resection of apex radicis dentis. Usingthis guide template could make the excision of apex radicis dentis more quickly and safer. PMID:26131072

  9. A survey on computer aided diagnosis for ocular diseases

    PubMed Central

    2014-01-01

    Background Computer Aided Diagnosis (CAD), which can automate the detection process for ocular diseases, has attracted extensive attention from clinicians and researchers alike. It not only alleviates the burden on the clinicians by providing objective opinion with valuable insights, but also offers early detection and easy access for patients. Method We review ocular CAD methodologies for various data types. For each data type, we investigate the databases and the algorithms to detect different ocular diseases. Their advantages and shortcomings are analyzed and discussed. Result We have studied three types of data (i.e., clinical, genetic and imaging) that have been commonly used in existing methods for CAD. The recent developments in methods used in CAD of ocular diseases (such as Diabetic Retinopathy, Glaucoma, Age-related Macular Degeneration and Pathological Myopia) are investigated and summarized comprehensively. Conclusion While CAD for ocular diseases has shown considerable progress over the past years, the clinical importance of fully automatic CAD systems which are able to embed clinical knowledge and integrate heterogeneous data sources still show great potential for future breakthrough. PMID:25175552

  10. Quality assurance and training procedures for computer-aided detection and diagnosis systems in clinical use.

    PubMed

    Huo, Zhimin; Summers, Ronald M; Paquerault, Sophie; Lo, Joseph; Hoffmeister, Jeffrey; Armato, Samuel G; Freedman, Matthew T; Lin, Jesse; Lo, Shih-Chung Ben; Petrick, Nicholas; Sahiner, Berkman; Fryd, David; Yoshida, Hiroyuki; Chan, Heang-Ping

    2013-07-01

    Computer-aided detection/diagnosis (CAD) is increasingly used for decision support by clinicians for detection and interpretation of diseases. However, there are no quality assurance (QA) requirements for CAD in clinical use at present. QA of CAD is important so that end users can be made aware of changes in CAD performance both due to intentional or unintentional causes. In addition, end-user training is critical to prevent improper use of CAD, which could potentially result in lower overall clinical performance. Research on QA of CAD and user training are limited to date. The purpose of this paper is to bring attention to these issues, inform the readers of the opinions of the members of the American Association of Physicists in Medicine (AAPM) CAD subcommittee, and thus stimulate further discussion in the CAD community on these topics. The recommendations in this paper are intended to be work items for AAPM task groups that will be formed to address QA and user training issues on CAD in the future. The work items may serve as a framework for the discussion and eventual design of detailed QA and training procedures for physicists and users of CAD. Some of the recommendations are considered by the subcommittee to be reasonably easy and practical and can be implemented immediately by the end users; others are considered to be "best practice" approaches, which may require significant effort, additional tools, and proper training to implement. The eventual standardization of the requirements of QA procedures for CAD will have to be determined through consensus from members of the CAD community, and user training may require support of professional societies. It is expected that high-quality CAD and proper use of CAD could allow these systems to achieve their true potential, thus benefiting both the patients and the clinicians, and may bring about more widespread clinical use of CAD for many other diseases and applications. It is hoped that the awareness of the need

  11. Computer-aided design for metabolic engineering.

    PubMed

    Fernández-Castané, Alfred; Fehér, Tamás; Carbonell, Pablo; Pauthenier, Cyrille; Faulon, Jean-Loup

    2014-12-20

    The development and application of biotechnology-based strategies has had a great socio-economical impact and is likely to play a crucial role in the foundation of more sustainable and efficient industrial processes. Within biotechnology, metabolic engineering aims at the directed improvement of cellular properties, often with the goal of synthesizing a target chemical compound. The use of computer-aided design (CAD) tools, along with the continuously emerging advanced genetic engineering techniques have allowed metabolic engineering to broaden and streamline the process of heterologous compound-production. In this work, we review the CAD tools available for metabolic engineering with an emphasis, on retrosynthesis methodologies. Recent advances in genetic engineering strategies for pathway implementation and optimization are also reviewed as well as a range of bionalytical tools to validate in silico predictions. A case study applying retrosynthesis is presented as an experimental verification of the output from Retropath, the first complete automated computational pipeline applicable to metabolic engineering. Applying this CAD pipeline, together with genetic reassembly and optimization of culture conditions led to improved production of the plant flavonoid pinocembrin. Coupling CAD tools with advanced genetic engineering strategies and bioprocess optimization is crucial for enhanced product yields and will be of great value for the development of non-natural products through sustainable biotechnological processes. PMID:24704607

  12. CAD-centric Computation Management System for a Virtual TBM

    SciTech Connect

    Ramakanth Munipalli; K.Y. Szema; P.Y. Huang; C.M. Rowell; A.Ying; M. Abdou

    2011-05-03

    HyPerComp Inc. in research collaboration with TEXCEL has set out to build a Virtual Test Blanket Module (VTBM) computational system to address the need in contemporary fusion research for simulating the integrated behavior of the blanket, divertor and plasma facing components in a fusion environment. Physical phenomena to be considered in a VTBM will include fluid flow, heat transfer, mass transfer, neutronics, structural mechanics and electromagnetics. We seek to integrate well established (third-party) simulation software in various disciplines mentioned above. The integrated modeling process will enable user groups to interoperate using a common modeling platform at various stages of the analysis. Since CAD is at the core of the simulation (as opposed to computational meshes which are different for each problem,) VTBM will have a well developed CAD interface, governing CAD model editing, cleanup, parameter extraction, model deformation (based on simulation,) CAD-based data interpolation. In Phase-I, we built the CAD-hub of the proposed VTBM and demonstrated its use in modeling a liquid breeder blanket module with coupled MHD and structural mechanics using HIMAG and ANSYS. A complete graphical user interface of the VTBM was created, which will form the foundation of any future development. Conservative data interpolation via CAD (as opposed to mesh-based transfer), the regeneration of CAD models based upon computed deflections, are among the other highlights of phase-I activity.

  13. Investigation of IGES for CAD/CAE data transfer

    NASA Technical Reports Server (NTRS)

    Zobrist, George W.

    1989-01-01

    In a CAD/CAE facility there is always the possibility that one may want to transfer the design graphics database from the native system to a non-native system. This may occur because of dissimilar systems within an organization or a new CAD/CAE system is to be purchased. The Initial Graphics Exchange Specification (IGES) was developed in an attempt to solve this scenario. IGES is a neutral database format into which the CAD/CAE native database format can be translated to and from. Translating the native design database format to IGES requires a pre-processor and transling from IGES to the native database format requires a post-processor. IGES is an artifice to represent CAD/CAE product data in a neutral environment to allow interfacing applications, archive the database, interchange of product data between dissimilar CAD/CAE systems, and other applications. The intent here is to present test data on translating design product data from a CAD/CAE system to itself and to translate data initially prepared in IGES format to various native design formats. This information can be utilized in planning potential procurement and developing a design discipline within the CAD/CAE community.

  14. Drafting the Basics

    ERIC Educational Resources Information Center

    Lamb, Carol M.; Kurtanich, David G.

    2007-01-01

    This paper outlines the work in progress undertaken by the School of Engineering Technology faculty to identify, assess, and develop a course to address the depth and breadth of drafting/plan preparation and plan reading skills required by the various engineering technology programs offered at Youngstown State University. The methodology used to…

  15. Drafting Lab Management Guide.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Instructional Materials Lab.

    This manual was developed to guide drafting instructors and vocational supervisors in sequencing laboratory instruction and controlling the flow of work for a 2-year machine trades training program. The first part of the guide provides information on program management (program description, safety concerns, academic issues, implementation…

  16. Drafting. Competency Based Curriculum.

    ERIC Educational Resources Information Center

    Everly, Al; And Others

    This competency based drafting curriculum is presented in seven specialization sections with units in each section containing a competency statement, performance objective, learning activities, evaluation, and quiz or problem sheets. Some units also contain answer sheets and/or handout sheets. Sections and number of units presented are (1) basic…

  17. Caught in the Draft

    ERIC Educational Resources Information Center

    Edge, Ron

    2007-01-01

    We've all seen (in movies, newscasts, or perhaps in person) the violent effect of the downwash that occurs when a helicopter hovers over the ground. Leaves, grass, and debris are dramatically blown about. We've also sat in front of circulating room fans and felt a large draft, whereas there seems to be very little air movement behind the fan. The…

  18. Effect of the Crystallization Process on the Marginal and Internal Gaps of Lithium Disilicate CAD/CAM Crowns

    PubMed Central

    Kim, Jae-Hong; Oh, Seunghan; Uhm, Soo-Hyuk

    2016-01-01

    The aim of this study is to quantify the effect of the crystallization process on lithium disilicate ceramic crowns fabricated using a computer-aided design/computer-aided manufacturing (CAD/CAM) system and to determine whether the effect of crystallization is clinically acceptable by comparing values of fit before and after the crystallization process. The mandibular right first molar was selected as the abutment for the experiments. Fifteen working models were prepared. Lithium disilicate crowns appropriate for each abutment were prepared using a commercial CAD/CAM system. Gaps in the marginal area and 4 internal areas of each crown were measured twice—before and after crystallization—using the silicone replica technique. The mean values of fit before and after crystallization were analyzed using a paired t-test to examine whether the conversion that occurred during crystallization affected marginal and internal gaps (α = 0.05). Gaps increased in the marginal area and decreased in the internal areas after crystallization. There were statistically significant differences in all of the investigated areas (P < 0.05). None of the values for marginal and internal fit of lithium disilicate CAD/CAM crowns after crystallization exceeded 120 μm, which is the clinically acceptable threshold. PMID:27123453

  19. Effect of the Crystallization Process on the Marginal and Internal Gaps of Lithium Disilicate CAD/CAM Crowns.

    PubMed

    Kim, Jae-Hong; Oh, Seunghan; Uhm, Soo-Hyuk

    2016-01-01

    The aim of this study is to quantify the effect of the crystallization process on lithium disilicate ceramic crowns fabricated using a computer-aided design/computer-aided manufacturing (CAD/CAM) system and to determine whether the effect of crystallization is clinically acceptable by comparing values of fit before and after the crystallization process. The mandibular right first molar was selected as the abutment for the experiments. Fifteen working models were prepared. Lithium disilicate crowns appropriate for each abutment were prepared using a commercial CAD/CAM system. Gaps in the marginal area and 4 internal areas of each crown were measured twice-before and after crystallization-using the silicone replica technique. The mean values of fit before and after crystallization were analyzed using a paired t-test to examine whether the conversion that occurred during crystallization affected marginal and internal gaps (α = 0.05). Gaps increased in the marginal area and decreased in the internal areas after crystallization. There were statistically significant differences in all of the investigated areas (P < 0.05). None of the values for marginal and internal fit of lithium disilicate CAD/CAM crowns after crystallization exceeded 120 μm, which is the clinically acceptable threshold. PMID:27123453

  20. CAD Model Retrieval Based on Graduated Assignment Algorithm

    NASA Astrophysics Data System (ADS)

    Tao, Songqiao

    2015-06-01

    A retrieval approach for CAD models based on graduated assignment algorithm is proposed in this paper. First, CAD models are transformed into face adjacency graphs (FAGs). Second, the vertex compatibility matrix and edge compatibility matrix between the FAGs of the query and data models are calculated, and the similarity metric for the two comparison models is established from their compatibility matrices, which serves as the optimization objective function for selecting vertex mapping matrix M between the two comparison models. Finally, Sinkhorn's alternative normalization approach for M's rows and columns is adopted to find the optimal vertex mapping matrix M. Experimental results have shown that the proposed approach supports CAD model retrieval.

  1. CAD/CAM ceramic restorations in the operatory and laboratory.

    PubMed

    Fasbinder, Dennis J

    2003-08-01

    Computer assisted design/computer assisted machining (CAD/CAM) technology has received considerable clinical and research interest from modern dental practices as a means of delivering all-ceramic restorations. The CEREC, System offers CAD/CAM dental technology designed for clinical use by dentists, as well as a separate system designed for dental laboratory technicians. The CEREC 3 system is indicated for dental operatory applications, and the CEREC inLab, system is indicated for dental laboratory applications. Although both systems rely on similar CAD/CAM technology, several significant differences exist in the processing techniques involved, restorative materials used, and types of restoration provided. PMID:14692164

  2. Computer aided design of multi-phase switched reluctance motor

    NASA Astrophysics Data System (ADS)

    Sheth, N. K.; Rajagopal, K. R.

    2005-05-01

    In this paper, a comprehensive computer-aided design (CAD) procedure of multiphase switched reluctance motor (SRM) is presented. Better approach for calculation of the outer dimensions, phase inductance, flux linkage and losses, and also a different concept for calculating the average torque of the motor are incorporated in the CAD program. The average torque is calculated based on the most effective 15° (for 8/6 SRM) of the static torque profile of the motor. A sample design of a 5hp SRM is presented in detail and the design is validated by conducting a two-dimensional finite element analysis of the motor.

  3. Fabrication of a CAD/CAM monolithic zirconia crown to fit an existing partial removable dental prosthesis.

    PubMed

    Paek, Janghyun; Noh, Kwantae; Pae, Ahran; Lee, Hyeonjong; Kim, Hyeong-Seob

    2016-08-01

    Fabricating a surveyed prosthesis beneath an existing partial removable dental prosthesis (PRDP) is a challenging and time-consuming procedure. The computer-aided design/computer-assisted manufacturing (CAD/CAM) technology was applied to fabricate a retrofitted, surveyed zirconia prosthesis to an existing PRDP. CAD/CAM technology enabled precise and easy replication of the contour of the planned surveyed crown on the existing abutment tooth. This technology ensured excellent adaptation and fit of newly fabricated crown to the existing PRDP with minimal adjustments. In this case report, a seventy-year-old male patient presented with fractured existing surveyed crown. Because the existing PRDP was serviceable, new crown was fabricated to the existing PRDP. PMID:27555903

  4. Fabrication of a CAD/CAM monolithic zirconia crown to fit an existing partial removable dental prosthesis

    PubMed Central

    2016-01-01

    Fabricating a surveyed prosthesis beneath an existing partial removable dental prosthesis (PRDP) is a challenging and time-consuming procedure. The computer-aided design/computer-assisted manufacturing (CAD/CAM) technology was applied to fabricate a retrofitted, surveyed zirconia prosthesis to an existing PRDP. CAD/CAM technology enabled precise and easy replication of the contour of the planned surveyed crown on the existing abutment tooth. This technology ensured excellent adaptation and fit of newly fabricated crown to the existing PRDP with minimal adjustments. In this case report, a seventy-year-old male patient presented with fractured existing surveyed crown. Because the existing PRDP was serviceable, new crown was fabricated to the existing PRDP. PMID:27555903

  5. 46 CFR 131.220 - Drafts.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Drafts. (a) Each vessel must have the drafts of the vessel plainly and legibly marked upon the stem and... stem or cutaway skeg, the keel does not extend forward or aft to the draft markings, the datum...

  6. Financial Aid.

    ERIC Educational Resources Information Center

    Graves, Mary A.

    This workbook assists college and vocational school bound American Indian students in determining their financial needs and in locating sources of financial aid. A checklist helps students assess the state of their knowledge of financial programs; a glossary defines terms pertinent to the realm of financial aid (i.e., graduate study programs,…

  7. CDMS - CAD data set management system test plan

    SciTech Connect

    Gray, E.L.

    1994-11-01

    This document will define the system test plan for the necessary modifications made to a commercial software product that manages and controls engineering drawings. Modifications include the ability to interface with the final plotting of CAD Data Sets.

  8. Today's CAD/CAM: flexible digital technologies expanding workflow options.

    PubMed

    Ferencz, Jonathan L

    2015-03-01

    CAD/CAM and digital scanning technologies have become essential components of dentistry. Digital impression scanning, restoration design, and manufacturing techniques yield greater treatment predictability, high-level esthetics, and functional accuracy using a variety of materials. PMID:25822749

  9. CAD/CAM approach to improving industry productivity gathers momentum

    NASA Technical Reports Server (NTRS)

    Fulton, R. E.

    1982-01-01

    Recent results and planning for the NASA/industry Integrated Programs for Aerospace-Vehicle Design (IPAD) program for improving productivity with CAD/CAM methods are outlined. The industrial group work is being mainly done by Boeing, and progress has been made in defining the designer work environment, developing requirements and a preliminary design for a future CAD/CAM system, and developing CAD/CAM technology. The work environment was defined by conducting a detailed study of a reference design process, and key software elements for a CAD/CAM system have been defined, specifically for interactive design or experiment control processes. Further work is proceeding on executive, data management, geometry and graphics, and general utility software, and dynamic aspects of the programs being developed are outlined

  10. Voice I/O: an effective option for CAD systems

    SciTech Connect

    Gill, S.P.

    1983-01-01

    The current state of speech recognition and compression technology is examined. The application of this technology to input/output in the CAD environment is then considered. Human factors are discussed.

  11. CAD/CAM-Interface For Optical Systems And Optical Drawings

    NASA Astrophysics Data System (ADS)

    Wieder, Eckart

    1989-04-01

    It is explained why a general interface for optical data between CAD/CAM-Systems is necessary. The requirements for the interface are discussed. The philosophy of a solution is demonstrated and it is shown how to proceed.

  12. The application of computer-aided technologies in automotive styling design

    NASA Astrophysics Data System (ADS)

    Zheng, Ze-feng; Zhang, Ji; Zheng, Ying

    2012-04-01

    In automotive industry, outline design is its life and creative design is its soul indeed. Computer-aided technology has been widely used in the automotive industry and more and more attention has been paid. This paper chiefly introduce the application of computer-aided technologies including CAD, CAM and CAE, analyses the process of automotive structural design and describe the development tendency of computer-aided design.

  13. A systematic review of CAD/CAM fit restoration evaluations.

    PubMed

    Boitelle, P; Mawussi, B; Tapie, L; Fromentin, O

    2014-11-01

    The evolution and development of CAD/CAM systems have led to the production of prosthetic reconstructions by going beyond the use of traditional techniques. Precision adjustment of prosthetic elements is considered essential to ensure sustainable restoration and dental preparation. The purpose of this article was to summarise the current literature on the fitting quality of fixed prostheses obtained by CAD/CAM technology. PMID:24952991

  14. CAD/CAM designer - Jack of all trades

    NASA Astrophysics Data System (ADS)

    Herndon, C. F.; Gallo, R. L.

    1986-01-01

    Aerospace design engineers are increasingly required to have more extensive knowledge of CAD/CAM tooling and manufacturing methods, in order to ensure that datasets can yield error-free components and assemblies. For structural concept design, engineers will work at the same CAD/CAM workstation on which the final component will be defined, controlling methods that yield the optimum solution for each member of a structural system from the viewpoints of both weight (for given strength) and producibility.

  15. Keeping ahead of the CAD/CAM curve

    NASA Astrophysics Data System (ADS)

    Daues, Jim; Meeker, Jay L.

    1993-06-01

    CAD/CAM tools can not only perform such major functions as analysis during the developmental phase of aerospace components; they also allow the design data to be passed directly to the user for access to numerically controlled (NC) programming, thereby shortening the product-delivery cycle. State-of-the-art commercial CAD/CAM systems support such advanced applications as solid modeling, feature-based design, and automation of key parts of the NC programming process.

  16. Mammographic computer-aided detection systems.

    PubMed

    2003-04-01

    While mammography is regarded as the best means available to screen for breast cancer, reading mammograms is a tedious, error-prone task. Given the repetitiveness of the process and the fact that less than 1% of mammograms in the average screening population contain cancer, it's no wonder that a significant number of breast cancers--about 28%--are missed by radiologists. The fact that human error is such a significant obstacle makes mammography screening an ideal application for computer-aided detection (CAD) systems. CAD systems serve as a "second pair of eyes" to ensure that radiologists don't miss a suspect area on an image. They analyze patterns on a digitized mammographic image, identify regions that may contain an abnormality indicating cancer, and mark these regions. The marks are then inspected and classified by a radiologist. But CAD systems provide no diagnosis of any kind--it's up to the radiologist to analyze the marked area and decide if it shows cancer. In this Evaluation, we describe the challenges posed by screening mammography, the operating principles and overall efficacy of CAD systems, and the characteristics to consider when purchasing a system. We also compare the performance of two commercially available systems, iCAD's MammoReader and R2's ImageChecker. Because the two systems offer comparable sensitivity, our judgments are based on other performance characteristics, including their ease of use, the number of false marks they produce, the degree to which they can integrate with hospital information systems, and their processing speed. PMID:12760158

  17. R23D: An innovative solution for product data conversion from paper engineering drawings to 3D true-CAD models

    SciTech Connect

    Su, Chao-Hsiang; Mayer, R.J.; Keen, A.A.; Browne, D.

    1996-12-31

    The existing archives of legacy (mostly paper-based) engineering drawings are precious assets of product data in a manufacturing enterprise. However, for these assets to continue to pay dividends they must be converted to a form suitable for computer-aided applications such as CAD/CAE/CAM, simulation-based design, and virtual prototyping. Manually converting legacy engineering drawings into CAD-file format has become common practice to enable reuse of this legacy data and for maintaining it more cost effectively. However, directly reusing legacy drawings for many modem computer-aided applications is not feasible if the complete product data is not properly recovered (e.g., 3D true-CAD solid model). In this paper, a multiple-level drawing conversion methodology, R23D, is introduced to supply a complete solution to this problem. R23D, based upon semantic drawing interpretation modules, incorporates promising results in vectorization and 3D reconstruction to provide an integrated environment for drawing conversion. It is our conviction that the migration of legacy engineering drawings to 3D product data for CAD/CAE/CAM systems is possible only when the full 3D product model can be rapidly reconstructed through such intelligent and integrated drawing conversion support. This paper introduces the basic approaches, requirements, and major components of R23D.

  18. Development of CAD/CAM Based Brace Models for the Treatment of Patients with Scoliosis-Classification Based Approach versus Finite Element Modelling

    PubMed Central

    Kleban, Alexander

    2015-01-01

    Study Design Retrospective controlled cohort study comparing the in-brace correction of two samples of scoliosis patients with braces of different computer aided design (CAD). Purpose In-brace correction and compliance correlate with outcome. The more standardized CAD braces that are available should enable improved in-brace correction and outcome. This study compared recent CAD brace developments with respect to in-brace corrections. Overview of Literature A 2013 randomized controlled trial demonstrated that 72% of a population complying to Scoliosis Research Society inclusion criteria on bracing did not progress using braces (mainly Boston braces) used in the United States and Canada with moderate corrective effect. Methods In-brace corrections achieved in a sample of patients fulfilling the inclusion criteria for studies on bracing using the classification based approach (CBA) were compared to the recent individual CAD/computer aided manufacturing bracing based on finite element modelling approach (FEMA). Results In-brace corrections using the different approaches differed widely. CBA in-brace corrections were 66% of the initial value. FEMA in-brace correction was 42% of the initial value. Conclusions Considering the fact that in-brace correction (and compliance) determines the end result of bracing in the treatment of scoliosis, scoliosis braces based on CBA are superior to the FEMA and the standard plaster based brace applications. PMID:26435781

  19. A completely automated CAD system for mass detection in a large mammographic database

    SciTech Connect

    Bellotti, R.; De Carlo, F.; Tangaro, S.

    2006-08-15

    Mass localization plays a crucial role in computer-aided detection (CAD) systems for the classification of suspicious regions in mammograms. In this article we present a completely automated classification system for the detection of masses in digitized mammographic images. The tool system we discuss consists in three processing levels: (a) Image segmentation for the localization of regions of interest (ROIs). This step relies on an iterative dynamical threshold algorithm able to select iso-intensity closed contours around gray level maxima of the mammogram. (b) ROI characterization by means of textural features computed from the gray tone spatial dependence matrix (GTSDM), containing second-order spatial statistics information on the pixel gray level intensity. As the images under study were recorded in different centers and with different machine settings, eight GTSDM features were selected so as to be invariant under monotonic transformation. In this way, the images do not need to be normalized, as the adopted features depend on the texture only, rather than on the gray tone levels, too. (c) ROI classification by means of a neural network, with supervision provided by the radiologist's diagnosis. The CAD system was evaluated on a large database of 3369 mammographic images [2307 negative, 1062 pathological (or positive), containing at least one confirmed mass, as diagnosed by an expert radiologist]. To assess the performance of the system, receiver operating characteristic (ROC) and free-response ROC analysis were employed. The area under the ROC curve was found to be A{sub z}=0.783{+-}0.008 for the ROI-based classification. When evaluating the accuracy of the CAD against the radiologist-drawn boundaries, 4.23 false positives per image are found at 80% of mass sensitivity.

  20. Drafting--Basic, Drafting--Intermediate: 9255.01.

    ERIC Educational Resources Information Center

    Dade County Public Schools, Miami, FL.

    The course has no prerequisites, offers instruction in basic drafting room techniques and procedures, and also covers job opportunities and industrial methods in engineering. The student is introduced to and asked to perform fundamental drafting problems with working drawings, using multiview and auxiliary views and sections. The course also…

  1. Electrical and Electronic Drafting, Drafting 3: 9257.01.

    ERIC Educational Resources Information Center

    Dade County Public Schools, Miami, FL.

    The course covers the standards used in the electronic field, electrical drawings, electronic drafting, and parts of functional drafting. The student will become familiar with symbols used in these fields and become proficient with tools and reference material used in drawing schematics and mechanical details and in electrical and electronic…

  2. Hearing Aid

    MedlinePlus

    ... and Food and Drug Administration Staff FDA permits marketing of new laser-based hearing aid with potential ... feeds Follow FDA on Twitter Follow FDA on Facebook View FDA videos on YouTube View FDA photos ...

  3. Teaching Aids

    ERIC Educational Resources Information Center

    Barnard, W. Robert, Ed.

    1976-01-01

    Provides evaluations of several aids for teaching chemistry. Included are The Use of Chemical Abstracts, Practical Technical Writing, Infrared Spectroscopy Programs, and a film titled "You Can't Go Back." (RH)

  4. Methods of searching and analyzing the data of the gear tooth profile in gear cutter CAD

    NASA Astrophysics Data System (ADS)

    Pang, Xing-hua; Wang, Er-hua

    2011-05-01

    In gear-cutter CAD(Computer Aided Design), certain points belonging to series cutter loci which were generated by the simulation of the cutting process may form a gear-tooth profile. Finding out such points and analyzing them to predict the properties of a new gear is also a very important step which determines the succedent analyzing steps. However, the problem of abstracting these data from the loci rapidly and accurately remains to be solved. The two algorithms presented in this paper, concentric-arcs searching and revolving-scan searching, would provide theoretic basis for the on-line gear-tooth analysis. The former focuses on drawing concentric-arcs between the dedendum and addendum of the gear, the latter concentrates on drawing radial lines between two angles.Such arcs and lines will intersect one or more lines of the cutter profile.Correspongding screening criterions will greatly contribute to juge and identify useful intersections which may form the gear profile, and the gear-tooth shape analysis will be carried out as a result. Keyword: gear cutter; CAD; concentric-arcs searching; revolving-scan searching.

  5. Methods of searching and analyzing the data of the gear tooth profile in gear cutter CAD

    NASA Astrophysics Data System (ADS)

    Pang, Xing-Hua; Wang, Er-Hua

    2010-12-01

    In gear-cutter CAD(Computer Aided Design), certain points belonging to series cutter loci which were generated by the simulation of the cutting process may form a gear-tooth profile. Finding out such points and analyzing them to predict the properties of a new gear is also a very important step which determines the succedent analyzing steps. However, the problem of abstracting these data from the loci rapidly and accurately remains to be solved. The two algorithms presented in this paper, concentric-arcs searching and revolving-scan searching, would provide theoretic basis for the on-line gear-tooth analysis. The former focuses on drawing concentric-arcs between the dedendum and addendum of the gear, the latter concentrates on drawing radial lines between two angles.Such arcs and lines will intersect one or more lines of the cutter profile.Correspongding screening criterions will greatly contribute to juge and identify useful intersections which may form the gear profile, and the gear-tooth shape analysis will be carried out as a result. Keyword: gear cutter; CAD; concentric-arcs searching; revolving-scan searching.

  6. The MAGIC-5 CAD for nodule detection in low dose and thin slice lung CTs

    NASA Astrophysics Data System (ADS)

    Cerello, Piergiorgio; MAGIC-5 Collaboration

    2010-11-01

    Lung cancer is the leading cause of cancer-related mortality in developed countries. Only 10-15% of all men and women diagnosed with lung cancer live 5 years after the diagnosis. However, the 5-year survival rate for patients diagnosed in the early asymptomatic stage of the disease can reach 70%. Early-stage lung cancers can be diagnosed by detecting non-calcified small pulmonary nodules with computed tomography (CT). Computer-aided detection (CAD) could support radiologists in the analysis of the large amount of noisy images generated in screening programs, where low-dose and thin-slice settings are used. The MAGIC-5 project, funded by the Istituto Nazionale di Fisica Nucleare (INFN, Italy) and Ministero dell'Università e della Ricerca (MUR, Italy), developed a multi-method approach based on three CAD algorithms to be used in parallel with a merging of their results: the Channeler Ant Model (CAM), based on Virtual Ant Colonies, the Dot-Enhancement/Pleura Surface Normals/VBNA (DE-PSN-VBNA), and the Region Growing Volume Plateau (RGVP). Preliminary results show quite good performances, to be improved with the refining of the single algorithm and the added value of the results merging.

  7. Clinical Criteria for Physician Aid in Dying.

    PubMed

    Orentlicher, David; Pope, Thaddeus Mason; Rich, Ben A

    2016-03-01

    More than 20 years ago, even before voters in Oregon had enacted the first aid in dying (AID) statute in the United States, Timothy Quill and colleagues proposed clinical criteria AID. Their proposal was carefully considered and temperate, but there were little data on the practice of AID at the time. (With AID, a physician writes a prescription for life-ending medication for a terminally ill, mentally capacitated adult.) With the passage of time, a substantial body of data on AID has developed from the states of Oregon and Washington. For more than 17 years, physicians in Oregon have been authorized to provide a prescription for AID. Accordingly, we have updated the clinical criteria of Quill, et al., based on the many years of experience with AID. With more jurisdictions authorizing AID, it is critical that physicians can turn to reliable clinical criteria. As with any medical practice, AID must be provided in a safe and effective manner. Physicians need to know (1) how to respond to a patient's inquiry about AID, (2) how to assess patient decision making capacity, and (3) how to address a range of other issues that may arise. To ensure that physicians have the guidance they need, Compassion & Choices convened the Physician Aid-in-Dying Clinical Criteria Committee, in July 2012, to create clinical criteria for physicians who are willing to provide AID to patients who request it. The committee includes experts in medicine, law, bioethics, hospice, nursing, social work, and pharmacy. Using an iterative consensus process, the Committee drafted the criteria over a one-year period. PMID:26539979

  8. Clinical Criteria for Physician Aid in Dying

    PubMed Central

    Pope, Thaddeus Mason; Rich, Ben A.

    2016-01-01

    Abstract More than 20 years ago, even before voters in Oregon had enacted the first aid in dying (AID) statute in the United States, Timothy Quill and colleagues proposed clinical criteria AID. Their proposal was carefully considered and temperate, but there were little data on the practice of AID at the time. (With AID, a physician writes a prescription for life-ending medication for a terminally ill, mentally capacitated adult.) With the passage of time, a substantial body of data on AID has developed from the states of Oregon and Washington. For more than 17 years, physicians in Oregon have been authorized to provide a prescription for AID. Accordingly, we have updated the clinical criteria of Quill, et al., based on the many years of experience with AID. With more jurisdictions authorizing AID, it is critical that physicians can turn to reliable clinical criteria. As with any medical practice, AID must be provided in a safe and effective manner. Physicians need to know (1) how to respond to a patient's inquiry about AID, (2) how to assess patient decision making capacity, and (3) how to address a range of other issues that may arise. To ensure that physicians have the guidance they need, Compassion & Choices convened the Physician Aid-in-Dying Clinical Criteria Committee, in July 2012, to create clinical criteria for physicians who are willing to provide AID to patients who request it. The committee includes experts in medicine, law, bioethics, hospice, nursing, social work, and pharmacy. Using an iterative consensus process, the Committee drafted the criteria over a one-year period. PMID:26539979

  9. 77 FR 46518 - Draft Resource Management Plan/General Plan Draft Environmental Impact Statement/Revised Draft...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-03

    ... Bureau of Reclamation Draft Resource Management Plan/General Plan Draft Environmental Impact Statement... Plan/ General Plan (RMP/GP) Draft Environmental Impact Statement/Revised Draft Environmental Impact... recreation lands ] within the vicinity of Los Banos, California. The general project location is south...

  10. Effectiveness of computer aided detection for solitary pulmonary nodules

    NASA Astrophysics Data System (ADS)

    Yan, Jiayong; Li, Wenjie; Du, Xiangying; Lu, Huihai; Xu, Jianrong; Xu, Mantao; Rong, Dongdong

    2009-02-01

    This study is to investigate the incremental effect of using a high performance computer-aided detection (CAD) system in detection of solitary pulmonary nodules in chest radiographs. The Kodak Chest CAD system was evaluated by a panel of six radiologists at different levels of experience. The observer study consisted of two independent phases: readings without CAD and readings with assistance of CAD. The study was conducted over a set of chest radiographs comprising 150 cancer cases and 150 cancer-free cases. The actual sensitivity of the CAD system is 72% with 3.7 false positives per case. Receiver operating characteristic (ROC) analysis was used to assess the overall observer performance. The AUZ (area under ROC curve) showed a significantly improvement (P=0.0001) from 0.844 to 0.884 after using CAD. The ROC analysis was also applied for observer performances on nodules in different sizes and visibilities. The average AUZs are improved from 0.798 to 0.835 (P=0.0003) for 5-10mm nodules, 0.853 to 0.907 (P=0.001) for 10-15mm nodules, 0.864 to 0.897 (P=0.051) for 15-20 mm nodules and 0.859 to 0.896 (P=0.0342) for 20-30mm nodules, respectively. For different visibilities, the average AUZs are improved from 0.886 to 0.915 (P=0.0337), 0.803 to 0.840 (P=0.063), 0.830 to 0.893 (P=0.0001), and 0.813 to 0.847 (P=0.152), for nodules clearly visible, hidden by ribs, partially overlap with ribs, and overlap with other structures, respectively. These results showed that observer performance could be greatly improved when the CAD system is employed as a second reader, especially for small nodules and nodules occluded by ribs.

  11. Aspiring Architects Draft Their Future

    ERIC Educational Resources Information Center

    Leffler, Kelly

    2006-01-01

    As the drafting instructor at Tri-County Career Center (TCCC) in Nelsonville, Ohio, the author is proud and pleased to give students real-life drafting experiences that apply learned theory. One of the best experiences his students have had involves taking part in building a custom home. Another is producing authentic house plans. The author also…

  12. 46 CFR 78.50-10 - Draft marks and draft indicating systems.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Draft marks and draft indicating systems. 78.50-10... OPERATIONS Markings on Vessels § 78.50-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or rudderpost or any...

  13. 46 CFR 97.40-10 - Draft marks and draft indicating systems.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Draft marks and draft indicating systems. 97.40-10... VESSELS OPERATIONS Markings on Vessels § 97.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost...

  14. 46 CFR 167.55-1 - Draft marks and draft indicating systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Draft marks and draft indicating systems. 167.55-1... NAUTICAL SCHOOL SHIPS Special Markings Required § 167.55-1 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost...

  15. 46 CFR 196.40-10 - Draft marks and draft indicating systems.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Draft marks and draft indicating systems. 196.40-10... VESSELS OPERATIONS Markings on Vessels § 196.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost...

  16. 46 CFR 97.40-10 - Draft marks and draft indicating systems.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Draft marks and draft indicating systems. 97.40-10... VESSELS OPERATIONS Markings on Vessels § 97.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost...

  17. 46 CFR 169.755 - Draft marks and draft indicating systems.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Draft marks and draft indicating systems. 169.755... SCHOOL VESSELS Vessel Control, Miscellaneous Systems, and Equipment Markings § 169.755 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon...

  18. 46 CFR 169.755 - Draft marks and draft indicating systems.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Draft marks and draft indicating systems. 169.755... SCHOOL VESSELS Vessel Control, Miscellaneous Systems, and Equipment Markings § 169.755 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon...

  19. 46 CFR 78.50-10 - Draft marks and draft indicating systems.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 3 2014-10-01 2014-10-01 false Draft marks and draft indicating systems. 78.50-10... OPERATIONS Markings on Vessels § 78.50-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or rudderpost or any...

  20. 46 CFR 97.40-10 - Draft marks and draft indicating systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Draft marks and draft indicating systems. 97.40-10... VESSELS OPERATIONS Markings on Vessels § 97.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost...

  1. 46 CFR 196.40-10 - Draft marks and draft indicating systems.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Draft marks and draft indicating systems. 196.40-10... VESSELS OPERATIONS Markings on Vessels § 196.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost...

  2. 46 CFR 97.40-10 - Draft marks and draft indicating systems.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Draft marks and draft indicating systems. 97.40-10... VESSELS OPERATIONS Markings on Vessels § 97.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost...

  3. 46 CFR 169.755 - Draft marks and draft indicating systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Draft marks and draft indicating systems. 169.755... SCHOOL VESSELS Vessel Control, Miscellaneous Systems, and Equipment Markings § 169.755 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon...

  4. 46 CFR 196.40-10 - Draft marks and draft indicating systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Draft marks and draft indicating systems. 196.40-10... VESSELS OPERATIONS Markings on Vessels § 196.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost...

  5. 46 CFR 167.55-1 - Draft marks and draft indicating systems.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Draft marks and draft indicating systems. 167.55-1... NAUTICAL SCHOOL SHIPS Special Markings Required § 167.55-1 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost...

  6. 46 CFR 167.55-1 - Draft marks and draft indicating systems.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Draft marks and draft indicating systems. 167.55-1... NAUTICAL SCHOOL SHIPS Special Markings Required § 167.55-1 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost...

  7. 46 CFR 196.40-10 - Draft marks and draft indicating systems.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Draft marks and draft indicating systems. 196.40-10... VESSELS OPERATIONS Markings on Vessels § 196.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost...

  8. 76 FR 62087 - Draft Conservation Plan and Draft Environmental Assessment; Dunes Sagebrush Lizard, Texas

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-06

    ... application includes the draft Texas Conservation Plan for the Dunes Sagebrush Lizard (TCP). The draft TCP... future, the draft TCP will also serve as a Habitat Conservation Plan (HCP) in support of future applications for Incidental Take Permits under the Act. The draft TCP and the draft Environmental...

  9. Aid-in-dying: issues and implications for nursing.

    PubMed

    Johnson, R A; Weiler, K

    1990-01-01

    A debate format describes questions arising from the Model Aid-in-Dying Act, drafted at the University of Iowa's College of Law, and the implications for nurses. The Act allows patients or their named surrogates to demand or request active aid-in-dying. The Act requires nurses and other health care providers to comply with the qualified patient's demand unless the health care provider is a registered conscientious objector. PMID:2229721

  10. EPA scientific integrity policy draft

    NASA Astrophysics Data System (ADS)

    Showstack, Randy

    2011-08-01

    The U.S. Environmental Protection Agency (EPA) issued its draft scientific integrity policy on 5 August. The draft policy addresses scientific ethical standards, communications with the public, the use of advisory committees and peer review, and professional development. The draft policy was developed by an ad hoc group of EPA senior staff and scientists in response to a December 2010 memorandum on scientific integrity from the White House Office of Science and Technology Policy. The agency is accepting public comments on the draft through 6 September; comments should be sent to osa.staff@epa.gov. For more information, see http://www.epa.gov/stpc/pdfs/draft-scientific-integrity-policy-aug2011.pdf.

  11. 1st Order Modeling of a SAW Delay Line using MathCAD(Registered)

    NASA Technical Reports Server (NTRS)

    Wilson, William C.; Atkinson, Gary M.

    2007-01-01

    To aid in the development of SAW sensors for Integrated Vehicle Health Monitoring applications, a first order model of a SAW Delay line has been created using MathCadA. The model implements the Impulse Response method to calculate the frequency response, impedance, and insertion loss. This paper presents the model and the results from the model for a SAW delay line design. Integrated Vehicle Health Monitoring (IVHM) of aerospace vehicles requires rugged sensors having reduced volume, mass, and power that can be used to measure a variety of phenomena. Wireless systems are preferred when retro-fitting sensors onto existing vehicles [1]. Surface Acoustic Wave (SAW) devices are capable of sensing: temperature, pressure, strain, chemical species, mass loading, acceleration, and shear stress. SAW technology is low cost, rugged, lightweight, and extremely low power. Passive wireless sensors have been developed using SAW technology. For these reasons new SAW sensors are being investigated for aerospace applications.

  12. An Integrated Unix-based CAD System for the Design and Testing of Custom VLSI Chips

    NASA Technical Reports Server (NTRS)

    Deutsch, L. J.

    1985-01-01

    A computer aided design (CAD) system that is being used at the Jet Propulsion Laboratory for the design of custom and semicustom very large scale integrated (VLSI) chips is described. The system consists of a Digital Equipment Corporation VAX computer with the UNIX operating system and a collection of software tools for the layout, simulation, and verification of microcircuits. Most of these tools were written by the academic community and are, therefore, available to JPL at little or no cost. Some small pieces of software have been written in-house in order to make all the tools interact with each other with a minimal amount of effort on the part of the designer.

  13. Synthesis of the Growth Hormone Secretion Mechanism Using Nonlinear Analysis and CAD Tools.

    PubMed

    Shell, J R

    2005-01-01

    The goal of this paper is to present a hardware realization of the feed-forward and feedback hypothalamic-pituitary growth hormone (GH) secretion mechanism based on a bio-mathematical nonlinear delay differential equation model developed by Farhy et al. (2003) and Veldhuis et al. (2001). Behavioral modeling is implemented through Verilog hardware descriptive language (HDL) to simulate the antagonistic and stimulatory interaction of growth hormone, growth hormone releasing hormone (GHRH) and somatotropin release inhibiting factor (SRIF). The model is synthesized using computer aided design (CAD) tools and is promulgated through a combinational complex programmable logic device (CPLD)/field programmable grid array (FPGA) Xilinx XSA-50 microchip. The microchip sequentially displays the decimal equivalents of the time changing hormonal concentration levels of the biomathematical model. PMID:17281277

  14. CAD/CAM and analysis - A production tool for spacecraft design

    NASA Astrophysics Data System (ADS)

    Bergsten, F. C.

    1983-01-01

    This paper describes an integrated Computer-Aided Design, Manufacturing, Assemby and Test System to achieve increased productivity and quality. The term CADMAT has been used to emphasize the importance of integrating the familiar CAD, CAM and CAT functions. The CADMAT methodology encompasses all automated and computer augmented processes throughout the product and business organizations. In Electronics, Design Simulation and Verification, Interactive Graphics (IAG), Automated Board Layout, and Automatic Test Vector Generation are discussed. In the mechanical area, the use of 2D and 3D graphics techniques, computerized finite element modeling, and structural analysis programs are described. The use of the design database in N/C manufacturing, automated inspection and testing is also examined.

  15. Advances in computer-aided design and computer-aided manufacture technology.

    PubMed

    Calamia, J R

    1996-01-01

    Although the development of computer-aided design (CAD) and computer-aided manufacture (CAM) technology and the benefits of increased productivity became obvious in the automobile and aerospace industries in the 1970s, investigations of this technology's application in the field of dentistry did not begin until the 1980s. Only now are we beginning to see the fruits of this work with the commercial availability of some systems; the potential for this technology seems boundless. This article reviews the recent literature with emphasis on the period from June 1992 to May 1993. This review should familiarize the reader with some of the latest developments in this technology, including a brief description of some systems currently available and the clinical and economical rationale for their acceptance into the dental mainstream. This article concentrates on a particular system, the Cerec (Siemens/Pelton and Crane, Charlotte, NC) system, for three reasons: First, this system has been available since 1985 and, as a result, has a track record of almost 7 years of data. Most of the data have just recently been released and consequently, much of this year's literature on CAD-CAM is monopolized by studies using this system. Second, this system was developed as a mobile, affordable, direct chairside CAD-CAM restorative method. As such, it is of special interest to the patient, providing a one-visit restoration. Third, the author is currently engaged in research using this particular system and has a working knowledge of this system's capabilities. PMID:9462062

  16. Concerns of Hydrothermal Degradation in CAD/CAM Zirconia

    PubMed Central

    Kim, J.-W.; Covel, N.S.; Guess, P.C.; Rekow, E.D.; Zhang, Y.

    2010-01-01

    Zirconia-based restorations are widely used in prosthetic dentistry; however, their susceptibility to hydrothermal degradation remains elusive. We hypothesized that CAD/CAM machining and subsequent surface treatments, i.e., grinding and/or grit-blasting, have marked effects on the hydrothermal degradation behavior of Y-TZP. CAD/CAM-machined Y-TZP plates (0.5 mm thick), both with and without subsequent grinding with various grit sizes or grit-blasting with airborne alumina particles, were subjected to accelerated aging tests in a steam autoclave. Results showed that the CAD/CAM-machined surfaces initially exhibited superior hydrothermal degradation resistance, but deteriorated at a faster rate upon prolonged autoclave treatment compared with ground and grit-blasted surfaces. The accelerated hydrothermal degradation of CAD/CAM surfaces is attributed to the CAD/CAM machining damage and the absence of surface compressive stresses in the fully sintered material. Clinical relevance for surface treatments of zirconia frameworks in terms of hydrothermal and structural stabilities is addressed. PMID:19966039

  17. Performance and value of CAD-deficient pine- Final Report

    SciTech Connect

    Bailian Li; Houmin Chang; Hasan Jameel

    2007-02-28

    The southern US produces 58% of the nation's timber, much of it grown in intensively managed plantations of genetically improved loblolly pine. One of the fastest-growing loblolly pine selections made by the NCSU-Industry Cooperative Tree Improvement Program, whose progeny are widely planted, is also the only known natural carrier of a rare gene, cadn1. This allele codes for deficiency in an enzyme, cinnamyl alcohol dehydrogenase, which catalyzes the last step in the biosynthesis of lignin precursors. This study is to characterize this candidate gene for marker-assisted selection and deployment in the breeding program. This research will enhance the sustainability of forest production in the South, where land-use pressures will limit the total area available in the future for intensively managed plantations. Furthermore, this research will provide information to establish higher-value plantation forests with more desirable wood/fiber quality traits. A rare mutant allele (cad-n1) of the cad gene in loblolly pine (Pinus taeda L.) causes a deficiency in the production of cinnamyl alcohol dehydrogenase (CAD). The effects of this allele were examined by comparing wood density and growth traits of cad-n1 heterozygous trees with those of wild-type trees in a 10-year-old open-pollinated family trial growing under two levels of fertilization in Scotland County, North Carolina. In all, 200 trees were sampled with 100 trees for each treatment. Wood density measurements were collected from wood cores at breast height using x-ray densitometry. We found that the substitution of cad-n1 for a wild-type allele (Cad) was associated with a significant effect on wood density. The cad-n1 heterozygotes had a significantly higher wood density (+2.6%) compared to wild-type trees. The higher density was apparently due to the higher percentage of latewood in the heterozygotes. The fertilization effect was highly significant for both growth and wood density traits. While no cad genotype x

  18. 78 FR 53792 - Draft Guidance for Reciprocity

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-30

    ... COMMISSION Draft Guidance for Reciprocity AGENCY: Nuclear Regulatory Commission. ACTION: Draft NUREG; request... for reciprocity. The NRC is requesting public comment on draft NUREG-1556, Volume 19, Revision 1...@nrc.gov . The draft NUREG-1556, Volume 19, Revision 1, is available under ADAMS Accession...

  19. Learning-based image preprocessing for robust computer-aided detection

    NASA Astrophysics Data System (ADS)

    Raghupathi, Laks; Devarakota, Pandu R.; Wolf, Matthias

    2013-03-01

    Recent studies have shown that low dose computed tomography (LDCT) can be an effective screening tool to reduce lung cancer mortality. Computer-aided detection (CAD) would be a beneficial second reader for radiologists in such cases. Studies demonstrate that while iterative reconstructions (IR) improve LDCT diagnostic quality, it however degrades CAD performance significantly (increased false positives) when applied directly. For improving CAD performance, solutions such as retraining with newer data or applying a standard preprocessing technique may not be suffice due to high prevalence of CT scanners and non-uniform acquisition protocols. Here, we present a learning-based framework that can adaptively transform a wide variety of input data to boost an existing CAD performance. This not only enhances their robustness but also their applicability in clinical workflows. Our solution consists of applying a suitable pre-processing filter automatically on the given image based on its characteristics. This requires the preparation of ground truth (GT) of choosing an appropriate filter resulting in improved CAD performance. Accordingly, we propose an efficient consolidation process with a novel metric. Using key anatomical landmarks, we then derive consistent feature descriptors for the classification scheme that then uses a priority mechanism to automatically choose an optimal preprocessing filter. We demonstrate CAD prototype∗ performance improvement using hospital-scale datasets acquired from North America, Europe and Asia. Though we demonstrated our results for a lung nodule CAD, this scheme is straightforward to extend to other post-processing tools dedicated to other organs and modalities.

  20. Indications for Computer-Aided Design and Manufacturing in Congenital Craniofacial Reconstruction.

    PubMed

    Fisher, Mark; Medina, Miguel; Bojovic, Branko; Ahn, Edward; Dorafshar, Amir H

    2016-09-01

    The complex three-dimensional relationships in congenital craniofacial reconstruction uniquely lend themselves to the ability to accurately plan and model the result provided by computer-aided design and manufacturing (CAD/CAM). The goal of this study was to illustrate indications where CAD/CAM would be helpful in the treatment of congenital craniofacial anomalies reconstruction and to discuss the application of this technology and its outcomes. A retrospective review was performed of all congenital craniofacial cases performed by the senior author between 2010 and 2014. Cases where CAD/CAM was used were identified, and illustrative cases to demonstrate the benefits of CAD/CAM were selected. Preoperative appearance, computerized plan, intraoperative course, and final outcome were analyzed. Preoperative planning enabled efficient execution of the operative plan with predictable results. Risk factors which made these patients good candidates for CAD/CAM were identified and compiled. Several indications, including multisuture and revisional craniosynostosis, facial bipartition, four-wall box osteotomy, reduction cranioplasty, and distraction osteogenesis could benefit most from this technology. We illustrate the use of CAD/CAM for these applications and describe the decision-making process both before and during surgery. We explore why we believe that CAD/CAM is indicated in these scenarios as well as the disadvantages and risks. PMID:27516839

  1. Computer-aided detection of small bowel strictures in CT enterography

    NASA Astrophysics Data System (ADS)

    Sainani, Nisha I.; Näppi, Janne J.; Sahani, Dushyant V.; Yoshida, Hiroyuki

    2011-03-01

    The workflow of CT enterography in an emergency setting could be improved significantly by computer-aided detection (CAD) of small bowel strictures to enable even non-expert radiologists to detect sites of obstruction rapidly. We developed a CAD scheme to detect strictures automatically from abdominal multi-detector CT enterography image data by use of multi-scale template matching and a blob detector method. A pilot study was performed on 15 patients with 22 surgically confirmed strictures to study the effect of the CAD scheme on observer performance. The 77% sensitivity of an inexperienced radiologist assisted by CAD was comparable with the 81% sensitivity of an unaided expert radiologist (p=0.07). The use of CAD reduced the reading time to identify strictures significantly (p<0.0001). Most of the false-positive CAD detections were caused by collapsed bowel loops, approximated bowel wall, muscles, or vessels, and they were easy to dismiss. The results indicate that CAD could provide radiologists with a rapid and accurate interpretation of strictures to improve workflow in an emergency setting.

  2. Fracture resistance and microleakage of endocrowns utilizing three CAD-CAM blocks.

    PubMed

    El-Damanhoury, H M; Haj-Ali, R N; Platt, J A

    2015-01-01

    This study assessed marginal leakage and fracture resistance of computer-aided design/computer-aided manufacturing (CAD/CAM) fabricated ceramic crowns with intracoronal extensions into the pulp chambers of endodontically treated teeth (endocrowns) using either feldspathic porcelain (CEREC Blocks [CB], Sirona Dental Systems GmbH, Bensheim, Germany), lithium disilicate (e.max [EX], Ivoclar Vivadent, Schaan, Liechtenstein), or resin nanoceramic (Lava Ultimate [LU], 3M ESPE, St Paul, MN, USA).). Thirty extracted human permanent maxillary molars were endodontically treated. Standardized preparations were done with 2-mm intracoronal extensions of the endocrowns into the pulp chamber. Teeth were divided into three groups (n=10); each group was restored with standardized CAD/CAM fabricated endocrowns using one of the three tested materials. After cementation with resin cement, specimens were stored in distilled water at 37°C for one week, subjected to thermocycling, and immersed in a 5% methylene-blue dye solution for 24 hours. A compressive load was applied at 35 degrees to long axis of the teeth using a universal testing machine until failure. Failure load was recorded, and specimens were examined under a stereomicroscope for modes of failure and microleakage. Results were analyzed using one-way analysis of variance and Bonferroni post hoc multiple comparison tests (α=0.05). LU showed significantly (p<0.05) higher fracture resistance and more favorable fracture mode (ie, fracture of the endocrown without fracture of tooth) as well as higher dye penetration than CB and EX. In conclusion, although using resin nanoceramic blocks for fabrication of endocrowns may result in better fracture resistance and a more favorable fracture mode than other investigated ceramic blocks, more microleakage may be expected with this material. PMID:25268039

  3. A CAD system based on multi-parametric analysis for cancer prostate detection on DCE-MRI

    NASA Astrophysics Data System (ADS)

    Mazzetti, Simone; De Luca, Massimo; Bracco, Christian; Vignati, Anna; Giannini, Valentina; Stasi, Michele; Russo, Filippo; Armando, Enrico; Agliozzo, Silvano; Regge, Daniele

    2011-03-01

    Computer-aided diagnosis (CAD) systems using dynamic contrast enhanced magnetic resonance imaging (DCE-MRI) data may be developed to help localize prostate cancer and guide biopsy, avoiding random sampling of the whole gland. The purpose of this study is to present a DCE-MRI CAD system, which calculates the likelihood of malignancy in a given area of the prostate by combining model-based and model-free parameters. The dataset includes 10 patients with prostate cancer, with a total of 13 foci of adenocarcinoma. The post-processing is based on the following steps: testing of registration quality, noise filtering, and extracting the proposed features needed to the CAD. Parameters with the best performance in discriminating between normal and cancer regions are selected by computing the area under the ROC curve, and by evaluating the correlation between pairs of features. A 6-dimensional parameters vector is generated for each pixel and fed into a Bayesian classifier, in which the output is the probability of malignancy. The classification performance is estimated using the leave-one-out method. The resulting area under the ROC curve is 0.899 (95%CI:0.893-0.905); sensitivity and specificity are 82.4% and 82.1% respectively at the best cut-off point (0.352). Preliminary results show that the system is accurate in detecting areas of the gland that are involved by tumor. Further studies will be necessary to confirm these promising preliminary results.

  4. An intelligent pre-processing framework for standardizing medical images for CAD and other post-processing applications

    NASA Astrophysics Data System (ADS)

    Raghupathi, Lakshminarasimhan; Devarakota, Pandu R.; Wolf, Matthias

    2012-03-01

    There is an increasing need to provide end-users with seamless and secure access to healthcare information acquired from a diverse range of sources. This might include local and remote hospital sites equipped with different vendors and practicing varied acquisition protocols and also heterogeneous external sources such as the Internet cloud. In such scenarios, image post-processing tools such as CAD (computer-aided diagnosis) which were hitherto developed using a smaller set of images may not always work optimally on newer set of images having entirely different characteristics. In this paper, we propose a framework that assesses the quality of a given input image and automatically applies an appropriate pre-processing method in such a manner that the image characteristics are normalized regardless of its source. We focus mainly on medical images, and the objective of the said preprocessing method is to standardize the performance of various image processing and workflow applications like CAD to perform in a consistent manner. First, our system consists of an assessment step wherein an image is evaluated based on criteria such as noise, image sharpness, etc. Depending on the measured characteristic, we then apply an appropriate normalization technique thus giving way to our overall pre-processing framework. A systematic evaluation of the proposed scheme is carried out on large set of CT images acquired from various vendors including images reconstructed with next generation iterative methods. Results demonstrate that the images are normalized and thus suitable for an existing LungCAD prototype1.

  5. The evaluation of multi-structure, multi-atlas pelvic anatomy features in a prostate MR lymphography CAD system

    NASA Astrophysics Data System (ADS)

    Meijs, M.; Debats, O.; Huisman, H.

    2015-03-01

    In prostate cancer, the detection of metastatic lymph nodes indicates progression from localized disease to metastasized cancer. The detection of positive lymph nodes is, however, a complex and time consuming task for experienced radiologists. Assistance of a two-stage Computer-Aided Detection (CAD) system in MR Lymphography (MRL) is not yet feasible due to the large number of false positives in the first stage of the system. By introducing a multi-structure, multi-atlas segmentation, using an affine transformation followed by a B-spline transformation for registration, the organ location is given by a mean density probability map. The atlas segmentation is semi-automatically drawn with ITK-SNAP, using Active Contour Segmentation. Each anatomic structure is identified by a label number. Registration is performed using Elastix, using Mutual Information and an Adaptive Stochastic Gradient optimization. The dataset consists of the MRL scans of ten patients, with lymph nodes manually annotated in consensus by two expert readers. The feature map of the CAD system consists of the Multi-Atlas and various other features (e.g. Normalized Intensity and multi-scale Blobness). The voxel-based Gentleboost classifier is evaluated using ROC analysis with cross validation. We show in a set of 10 studies that adding multi-structure, multi-atlas anatomical structure likelihood features improves the quality of the lymph node voxel likelihood map. Multiple structure anatomy maps may thus make MRL CAD more feasible.

  6. 75 FR 998 - Terminate Long Range Aids to Navigation (Loran-C) Signal

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-07

    ... FR 4047), the U.S. Coast Guard began a public review process for its Draft Programmatic Environmental... SECURITY Coast Guard Terminate Long Range Aids to Navigation (Loran-C) Signal AGENCY: U.S. Coast Guard, DHS..., the Department of Transportation has determined that sufficient alternative navigation aids...

  7. 78 FR 46950 - Ecobaby Organics, Inc.; Analysis of Proposed Consent Order To Aid Public Comment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-02

    ... claims. \\2\\ See Guides for the Use of Environmental Marketing Claims, 77 FR 62, 122, 62,123 (Oct. 11... Ecobaby Organics, Inc.; Analysis of Proposed Consent Order To Aid Public Comment AGENCY: Federal Trade.... The attached Analysis to Aid Public Comment describes both the allegations in the draft complaint...

  8. 78 FR 46952 - Relief-Mart, Inc.; Analysis of Proposed Consent Order To Aid Public Comment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-02

    ... Marketing Claims, 77 FR 62, 122, 62,123 (Oct. 11, 2012). Parts III though VI require Relief-Mart to: Keep... Relief-Mart, Inc.; Analysis of Proposed Consent Order To Aid Public Comment AGENCY: Federal Trade.... The attached Analysis to Aid Public Comment describes both the allegations in the draft complaint...

  9. CAD-model-based vision for space applications

    NASA Technical Reports Server (NTRS)

    Shapiro, Linda G.

    1988-01-01

    A pose acquisition system operating in space must be able to perform well in a variety of different applications including automated guidance and inspections tasks with many different, but known objects. Since the space station is being designed with automation in mind, there will be CAD models of all the objects, including the station itself. The construction of vision models and procedures directly from the CAD models is the goal of this project. The system that is being designed and implementing must convert CAD models to vision models, predict visible features from a given view point from the vision models, construct view classes representing views of the objects, and use the view class model thus derived to rapidly determine the pose of the object from single images and/or stereo pairs.

  10. Development of a web-based DICOM-SR viewer for CAD data of multiple sclerosis lesions in an imaging informatics-based efolder

    NASA Astrophysics Data System (ADS)

    Ma, Kevin; Wong, Jonathan; Zhong, Mark; Zhang, Jeff; Liu, Brent

    2014-03-01

    In the past, we have presented an imaging-informatics based eFolder system for managing and analyzing imaging and lesion data of multiple sclerosis (MS) patients, which allows for data storage, data analysis, and data mining in clinical and research settings. The system integrates the patient's clinical data with imaging studies and a computer-aided detection (CAD) algorithm for quantifying MS lesion volume, lesion contour, locations, and sizes in brain MRI studies. For compliance with IHE integration protocols, long-term storage in PACS, and data query and display in a DICOM compliant clinical setting, CAD results need to be converted into DICOM-Structured Report (SR) format. Open-source dcmtk and customized XML templates are used to convert quantitative MS CAD results from MATLAB to DICOM-SR format. A web-based GUI based on our existing web-accessible DICOM object (WADO) image viewer has been designed to display the CAD results from generated SR files. The GUI is able to parse DICOM-SR files and extract SR document data, then display lesion volume, location, and brain matter volume along with the referenced DICOM imaging study. In addition, the GUI supports lesion contour overlay, which matches a detected MS lesion with its corresponding DICOM-SR data when a user selects either the lesion or the data. The methodology of converting CAD data in native MATLAB format to DICOM-SR and displaying the tabulated DICOM-SR along with the patient's clinical information, and relevant study images in the GUI will be demonstrated. The developed SR conversion model and GUI support aim to further demonstrate how to incorporate CAD post-processing components in a PACS and imaging informatics-based environment.

  11. An MTANN CAD for detection of polyps in false-negative CT colonography cases in a large multicenter clinical trial: preliminary results

    NASA Astrophysics Data System (ADS)

    Suzuki, Kenji; Sheu, Ivan; Epstein, Mark; Kohlbrenner, Ryan; Lostumbo, Antonella; Rockey, Don C.; Dachman, Abraham H.

    2008-03-01

    A major challenge in computer-aided detection (CAD) of polyps in CT colonography (CTC) is the detection of "difficult" polyps which radiologists are likely to miss. Our purpose was to develop a CAD scheme incorporating massive-training artificial neural networks (MTANNs) and to evaluate its performance on false-negative (FN) cases in a large multicenter clinical trial. We developed an initial polyp-detection scheme consisting of colon segmentation based on CT value-based analysis, detection of polyp candidates based on morphologic analysis, and quadratic discriminant analysis based on 3D pattern features for classification. For reduction of false-positive (FP) detections, we developed multiple expert 3D MTANNs designed to differentiate between polyps and seven types of non-polyps. Our independent database was obtained from CTC scans of 155 patients with polyps from a multicenter trial in which 15 medical institutions participated nationwide. Among them, about 45% patients received FN interpretations in CTC. For testing our CAD, 14 cases with 14 polyps/masses were randomly selected from the FN cases. Lesion sizes ranged from 6-35 mm, with an average of 10 mm. The initial CAD scheme detected 71.4% (10/14) of "missed" polyps, including sessile polyps and polyps on folds, with 18.9 (264/14) FPs per case. The MTANNs removed 75% (197/264) of the FPs without loss of any true positives; thus, the performance of our CAD scheme was improved to 4.8 (67/14) FPs per case. With our CAD scheme incorporating MTANNs, 71.4% of polyps "missed" by radiologists in the trial were detected correctly, with a reasonable number of FPs.

  12. 46 CFR 167.55-1 - Draft marks and draft indicating systems.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... NAUTICAL SCHOOL SHIPS Special Markings Required § 167.55-1 Draft marks and draft indicating systems. (a... are of uniform height equal to the vertical spacing between consecutive marks. (f) Draft marks must...

  13. 46 CFR 78.50-10 - Draft marks and draft indicating systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... draft marks plainly and legibly visible upon the stem and upon the sternpost or rudderpost or any place... of the draft marks, due to raked stem or cut—away skeg, the datum line from which the draft shal...

  14. 46 CFR 167.55-1 - Draft marks and draft indicating systems.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or... aft to the location of the draft marks, due to a raked stem or cut away skeg, the draft must...

  15. 46 CFR 78.50-10 - Draft marks and draft indicating systems.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... draft marks plainly and legibly visible upon the stem and upon the sternpost or rudderpost or any place... of the draft marks, due to raked stem or cut—away skeg, the datum line from which the draft shal...

  16. 46 CFR 78.50-10 - Draft marks and draft indicating systems.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... draft marks plainly and legibly visible upon the stem and upon the sternpost or rudderpost or any place... of the draft marks, due to raked stem or cut—away skeg, the datum line from which the draft shal...

  17. Passivity of conventional and CAD/CAM fabricated implant frameworks.

    PubMed

    de Araújo, Gabriela Monteiro; de França, Danilo Gonzaga Bernardo; Silva Neto, João Paulo; Barbosa, Gustavo Augusto Seabra

    2015-01-01

    The objective of this research was to evaluate the passivity by measuring the passive fit and strain development of frameworks screwed on abutments, made by CAD/CAM technology, and to compare these parts with samples manufactured by conventional casting. Using CAD/CAM technology, four samples were made from zirconia (Zircad) and four samples were manufactured from cobalt-chrome (CoCrcad). The control groups were four specimens of cobalt-chrome, made by one-piece casting (CoCrci), with a total of 12 frameworks. To evaluate the passive fit, the vertical misfit at the abutment-framework interface was measured with scanning electron microscopy (250×) when only one screw was tightened. The mean strain in these frameworks was analyzed by photoelasticity test. A significant difference in the passive fit was observed between the control and sample groups. CoCrcad exhibited the best value of passive fit (48.76±13.45 µm) and CoCrci the worst (187.55±103.63 µm); Zircad presented an intermediate value (103.81±43.15 µm). When compared to the other groups, CoCrci showed the highest average stress around the implants (17.19±7.22 kPa). It was concluded that CAD/CAM-fabricated frameworks exhibited better passivity compared with conventionally fabricated frameworks. CAD/CAM-fabricated Co-Cr frameworks may exhibit better passive fit compared with CAD/CAM-fabricated zirconia frameworks. Even so, similar levels of stress were achieved for CAD/CAM-fabricated frameworks. PMID:26200153

  18. Longitudinal myocardial blood flow gradient and CAD detection.

    PubMed

    Valenta, Ines; Wahl, Richard L; Schindler, Thomas H

    2015-01-01

    Conventional myocardial perfusion scintigraphy with SPECT/CT or with PET/CT has been established as pivotal clinical imaging modality for the identification of hemodynamically obstructive coronary artery disease (CAD) and risk stratification of patients with suspected or known CAD. While the assessment of the relative distribution of radiotracer uptake in the left-ventricular (LV) myocardium during vasomotor stress identifies the "culprit" or most severe CAD lesion in multivessel disease, flow-limiting effects of remaining but less severe epicardial lesions may be missed. This limitation principally may be overcome by the possibility of PET/CT with radiotracer-kinetic modeling to concurrently assess left-ventricular (LV) myocardial blood flow (MBF) in ml/g/min at rest and during vasomotor stress and the resulting myocardial flow reserve (MFR). While a stress-induced regional reduction in radiotracer uptake or perfusion identifies the most advanced epicardial lesion, flow-limiting effects of the other epicardial lesions may principally be identified by regional reductions in MFR. Conversely, reductions in MFR in CAD may be appreciated as suboptimal as they reflect not only the consequences of flow-limiting effects of epicardial stenosis but also of microvascular dysfunction. The relatively low specificity of a reduced therefore MFR may hamper a clear identification of the downstream hemodynamic effects of an epicardial lesion on hyperemic coronary flow increases. In this scenario, there is increasing evidence that the PET assessment of an abnormal decrease in MBF from the base to the apex of the LV during hyperemic flows, a so-called longitudinal flow gradient, is primarily related to fluid dynamic consequences of CAD-induced diffuse luminal and/or focal narrowing of the epicardial artery. The combined evaluation of the MFR and corresponding longitudinal MBF gradient could emerge as new a novel analytic concept to further optimize the identification and

  19. Draft Genome Sequence of Kocuria rhizophila RF, a Radiation-Resistant Soil Isolate.

    PubMed

    Mehrabadi, Jalil Fallah; Mirzaie, Amir; Ahangar, Nahid; Rahimi, Arian; Rokni-Zadeh, Hassan

    2016-01-01

    Kocuria rhizophila RF, a soil isolate from Iran, is a radiation-resistant bacterium. Only a limited amount of genomic information for radiation-resistant bacteria is currently available. Here, we report the draft genome sequence of this bacterium, providing knowledge to aid in the discovery of the genomic basis of its resistance to radiation. PMID:26966202

  20. Draft Genome Sequence of the Tyramine Producer Enterococcus durans Strain IPLA 655

    PubMed Central

    Ladero, Victor; Linares, Daniel M.; del Rio, Beatriz; Fernandez, Maria; Martin, M. Cruz

    2013-01-01

    We here report a 3.059-Mbp draft assembly for the genome of Enterococcus durans strain IPLA 655. This dairy isolate provides a model for studying the regulation of the biosynthesis of tyramine (a toxic compound). These results should aid our understanding of tyramine production and allow tyramine accumulation in food to be reduced. PMID:23682153

  1. Draft Genome Sequence of Kocuria rhizophila RF, a Radiation-Resistant Soil Isolate

    PubMed Central

    Mehrabadi, Jalil Fallah; Mirzaie, Amir; Ahangar, Nahid; Rahimi, Arian

    2016-01-01

    Kocuria rhizophila RF, a soil isolate from Iran, is a radiation-resistant bacterium. Only a limited amount of genomic information for radiation-resistant bacteria is currently available. Here, we report the draft genome sequence of this bacterium, providing knowledge to aid in the discovery of the genomic basis of its resistance to radiation. PMID:26966202

  2. The Allocation and Distribution of Chapter 1 Funds in New York State School Districts. Draft.

    ERIC Educational Resources Information Center

    Drazen, Shelley

    This draft report examines patterns in the allocation and distribution of federal compensatory education (Chapter 1) funds in New York State school districts. To preserve local control over education, Chapter 1 aid for disadvantaged students is distributed through a three-tiered system involving a federal allotment formula, state distributions,…

  3. Maxillary implant-supported bar overdenture and mandibular implant-retained fixed denture using CAD/CAM technology and 3-D design software: a clinical report.

    PubMed

    Spyropoulou, Panagiota-Eirini; Razzoog, Michael E; Duff, Renée E; Chronaios, Dimitrios; Saglik, Berna; Tarrazzi, Daler E

    2011-06-01

    The implant-supported bar overdenture and the implant-retained fixed complete denture are appropriate treatment choices for patients with inadequate bone volume in the posterior maxilla and mandible, respectively. Computer-aided design/computer-aided manufacturing (CAD/CAM) technology has broadened the scope and application of those treatment options, allowing for prosthodontically-driven implant placement and ideal substructure design for optimal esthetics and biomechanics. This report describes the fabrication of a maxillary implant-supported milled titanium bar with attachments and an overdenture, and a mandibular implant-retained fixed complete denture with milled titanium substructure. PMID:21640235

  4. The prediction of breast cancer biopsy outcomes using two CAD approaches that both emphasize an intelligible decision process

    SciTech Connect

    Elter, M.; Schulz-Wendtland, R.; Wittenberg, T.

    2007-11-15

    Mammography is the most effective method for breast cancer screening available today. However, the low positive predictive value of breast biopsy resulting from mammogram interpretation leads to approximately 70% unnecessary biopsies with benign outcomes. To reduce the high number of unnecessary breast biopsies, several computer-aided diagnosis (CAD) systems have been proposed in the last several years. These systems help physicians in their decision to perform a breast biopsy on a suspicious lesion seen in a mammogram or to perform a short term follow-up examination instead. We present two novel CAD approaches that both emphasize an intelligible decision process to predict breast biopsy outcomes from BI-RADS findings. An intelligible reasoning process is an important requirement for the acceptance of CAD systems by physicians. The first approach induces a global model based on decison-tree learning. The second approach is based on case-based reasoning and applies an entropic similarity measure. We have evaluated the performance of both CAD approaches on two large publicly available mammography reference databases using receiver operating characteristic (ROC) analysis, bootstrap sampling, and the ANOVA statistical significance test. Both approaches outperform the diagnosis decisions of the physicians. Hence, both systems have the potential to reduce the number of unnecessary breast biopsies in clinical practice. A comparison of the performance of the proposed decision tree and CBR approaches with a state of the art approach based on artificial neural networks (ANN) shows that the CBR approach performs slightly better than the ANN approach, which in turn results in slightly better performance than the decision-tree approach. The differences are statistically significant (p value <0.001). On 2100 masses extracted from the DDSM database, the CRB approach for example resulted in an area under the ROC curve of A(z)=0.89{+-}0.01, the decision-tree approach in A(z)=0

  5. Study of medium beta elliptical cavities for CADS

    NASA Astrophysics Data System (ADS)

    Wen, Liangjian; Zhang, Shenghu; Li, Yongming; Wang, Ruoxu; Guo, Hao; Zhang, Cong; Jia, Huan; Jiang, Tiancai; Li, Chunlong; He, Yuan

    2016-02-01

    The China Accelerator-Driven Sub-critical System (CADS) is a high intensity proton facility to dispose of nuclear waste and generate electric power. CADS is based on a 1.5 GeV, 10 mA CW superconducting (SC) linac as a driver. The high energy section of the linac is composed of two families of SC elliptical cavities which are designed with geometrical beta 0.63 and 0.82. In this paper, the 650 MHz β=0.63 SC elliptical cavity is studied, including cavity optimization, multipacting, high order modes (HOMs) and generator RF power calculation. Supported by National Natural Science Foundation of China (91426303)

  6. Development to integrate conceptual design tools and a CAD system

    NASA Astrophysics Data System (ADS)

    Torres, V. H.; Ríos, J.; Vizán, A.; Pérez, J. M.

    2012-04-01

    The information supported by PLM/CAD systems is mainly related to Embodiment and Detail Design Phases. Information related to the Conceptual Design Phase is mainly limited to requirement specification documents and system architecture diagram documents. This work aims helping in the integration of the Conceptual Design process and its associated information flow into a commercial software system. It proposes a development framework to integrate Quality Function Deployment, Axiomatic Design, and Failure Mode and Effects Analysis into a PLM/CAD system. This communication presents the methodology used in the development, the software development environment, the modeling of the proposed application and the first results of a pilot implementation.

  7. Impact of IPAD on CAD/CAM database university research

    NASA Technical Reports Server (NTRS)

    Leach, L. M.; Wozny, M. J.

    1984-01-01

    IPAD program has provided direction, focus and software products which impacted on CAD/CAM data base research and follow-on research. The relationship of IPAD to the research projects which involve the storage of geometric data in common data ase facilities such as data base machines, the exchange of data between heterogeneous data bases, the development of IGES processors, the migration of lrge CAD/CAM data base management systems to noncompatible hosts, and the value of RIM as a research tool is described.

  8. CAD/CAM in the Brazilian aeronautical industry

    NASA Astrophysics Data System (ADS)

    Lampi, L. H.; Embraer, S. A.

    Features, applications and progress in the usage of CAD/CAM since 1980 by an aircraft manufacturer in Brazil are described. The system comprises 34 graphics work stations dedicated to structural design, lofting, electrical cable routing, finite element modeling and quality control. Standardized work methods have been devised to enhance productivity. Programs have been defined for finite element stress analysis and generating wiring diagrams. The computerized design capabilities have increased productivity for hole boring accuracy through work on digitized controllers. Psychological testing has been initiated to identify users who can adapt more easily to CAD/CAM utilization.

  9. Computer-aided design of polymers and composites

    NASA Technical Reports Server (NTRS)

    Kaelble, D. H.

    1985-01-01

    This book on computer-aided design of polymers and composites introduces and discusses the subject from the viewpoint of atomic and molecular models. Thus, the origins of stiffness, strength, extensibility, and fracture toughness in composite materials can be analyzed directly in terms of chemical composition and molecular structure. Aspects of polymer composite reliability are considered along with characterization techniques for composite reliability, relations between atomic and molecular properties, computer aided design and manufacture, polymer CAD/CAM models, and composite CAD/CAM models. Attention is given to multiphase structural adhesives, fibrous composite reliability, metal joint reliability, polymer physical states and transitions, chemical quality assurance, processability testing, cure monitoring and management, nondestructive evaluation (NDE), surface NDE, elementary properties, ionic-covalent bonding, molecular analysis, acid-base interactions, the manufacturing science, and peel mechanics.

  10. Annotation and retrieval system of CAD models based on functional semantics

    NASA Astrophysics Data System (ADS)

    Wang, Zhansong; Tian, Ling; Duan, Wenrui

    2014-11-01

    CAD model retrieval based on functional semantics is more significant than content-based 3D model retrieval during the mechanical conceptual design phase. However, relevant research is still not fully discussed. Therefore, a functional semantic-based CAD model annotation and retrieval method is proposed to support mechanical conceptual design and design reuse, inspire designer creativity through existing CAD models, shorten design cycle, and reduce costs. Firstly, the CAD model functional semantic ontology is constructed to formally represent the functional semantics of CAD models and describe the mechanical conceptual design space comprehensively and consistently. Secondly, an approach to represent CAD models as attributed adjacency graphs(AAG) is proposed. In this method, the geometry and topology data are extracted from STEP models. On the basis of AAG, the functional semantics of CAD models are annotated semi-automatically by matching CAD models that contain the partial features of which functional semantics have been annotated manually, thereby constructing CAD Model Repository that supports model retrieval based on functional semantics. Thirdly, a CAD model retrieval algorithm that supports multi-function extended retrieval is proposed to explore more potential creative design knowledge in the semantic level. Finally, a prototype system, called Functional Semantic-based CAD Model Annotation and Retrieval System(FSMARS), is implemented. A case demonstrates that FSMARS can successfully botain multiple potential CAD models that conform to the desired function. The proposed research addresses actual needs and presents a new way to acquire CAD models in the mechanical conceptual design phase.

  11. Floriculture Aide.

    ERIC Educational Resources Information Center

    Martin, Joyce; Looney, Era

    Designed for use in a self-paced, open-entry/open-exit vocational training program for a floriculture aide, this program guide is one of six for teachers of adult women offenders from a correctional institution. Module topic outlines and sample lesson plans are presented on eleven topics: occupational opportunities in the retail florist industry;…

  12. Classroom Aids

    ERIC Educational Resources Information Center

    Science Activities: Classroom Projects and Curriculum Ideas, 2007

    2007-01-01

    This article describes 6 aids for science instruction, including (1) the use of fudge to represent lava; (2) the "Living by Chemistry" program, designed to make high school chemistry more accessible to a diverse pool of students without sacrificing content; (3) NOAA and NSTA's online coral reef teaching tool, a new web-based "science toolbox" for…

  13. Impact of Computer-Aided Detection Systems on Radiologist Accuracy With Digital Mammography

    PubMed Central

    Cole, Elodia B.; Zhang, Zheng; Marques, Helga S.; Hendrick, R. Edward; Yaffe, Martin J.; Pisano, Etta D.

    2014-01-01

    OBJECTIVE The purpose of this study was to assess the impact of computer-aided detection (CAD) systems on the performance of radiologists with digital mammograms acquired during the Digital Mammographic Imaging Screening Trial (DMIST). MATERIALS AND METHODS Only those DMIST cases with proven cancer status by biopsy or 1-year follow-up that had available digital images were included in this multireader, multicase ROC study. Two commercially available CAD systems for digital mammography were used: iCAD SecondLook, version 1.4; and R2 ImageChecker Cenova, version 1.0. Fourteen radiologists interpreted, without and with CAD, a set of 300 cases (150 cancer, 150 benign or normal) on the iCAD SecondLook system, and 15 radiologists interpreted a different set of 300 cases (150 cancer, 150 benign or normal) on the R2 ImageChecker Cenova system. RESULTS The average AUC was 0.71 (95% CI, 0.66–0.76) without and 0.72 (95% CI, 0.67–0.77) with the iCAD system (p = 0.07). Similarly, the average AUC was 0.71 (95% CI, 0.66–0.76) without and 0.72 (95% CI 0.67–0.77) with the R2 system (p = 0.08). Sensitivity and specificity differences without and with CAD for both systems also were not significant. CONCLUSION Radiologists in our studies rarely changed their diagnostic decisions after the addition of CAD. The application of CAD had no statistically significant effect on radiologist AUC, sensitivity, or specificity performance with digital mammograms from DMIST. PMID:25247960

  14. A computer aided design procedure for generating gear teeth

    NASA Technical Reports Server (NTRS)

    Chang, S. H.; Huston, R. L.; Coy, J. J.

    1984-01-01

    A procedure for computer aided design (CAD) of gear teeth is presented. It is developed for generated teeth fabricated by a hob cutter or a shaper. It provides a means for analytically and numerically determining the tooth profile, given the cutter profile. An illustrative example with involute tooth profiles is given. Application with non-standard profiles and with bevel, spiral bevel, and hypoid gears is discussed.

  15. Computer-aided design of flight control systems

    NASA Technical Reports Server (NTRS)

    Stengel, Robert F.; Sircar, Subrata

    1991-01-01

    A computer program is presented for facilitating the development and assessment of flight control systems, and application to a control design is discussed. The program is a computer-aided control-system design program based on direct digital synthesis of a proportional-integral-filter controller with scheduled linear-quadratic-Gaussian gains and command generator tracking of pilot inputs. The FlightCAD system concentrates on aircraft dynamics, flight-control systems, stability and performance, and has practical engineering applications.

  16. The use of CAD/CAM technology to fabricate a custom ceramic implant abutment: a clinical report.

    PubMed

    Bertolini, Martinna de Mendonça e; Kempen, Juan; Lourenço, Eduardo José Veras; Telles, Daniel de Moraes

    2014-05-01

    Well-placed dental implants are a prerequisite of functional and esthetically successful dental implant-supported crowns. The presence of soft tissue is essential for excellent esthetics because the dental implant or titanium abutment may become visible if the soft-tissue contour is not acceptable. This clinical report describes the use of a custom ceramic implant abutment designed with computer-aided design and computer-aided manufacturing (CAD/CAM) technology by milling a zirconia framework that was cemented extraorally to a prefabricated titanium abutment with a reduced diameter. This ceramic abutment has the strength and precise fit of a titanium interface and also the esthetic advantages of shaded custom-milled zirconia, with no visible metal. PMID:24433839

  17. Accuracy of fibular sectioning and insertion into a rapid-prototyped bone plate, for mandibular reconstruction using CAD-CAM technology.

    PubMed

    Ciocca, Leonardo; Marchetti, Claudio; Mazzoni, Simona; Baldissara, Paolo; Gatto, Maria Rosaria Antonella; Cipriani, Riccardo; Scotti, Roberto; Tarsitano, Achille

    2015-01-01

    Modern techniques of mandibular reconstruction, such as CAD-CAM technology and rapid prototyping, offer new means by which reconstructive surgery can be planned to optimise aesthetic outcomes and prosthetic rehabilitation. The high degree of accuracy afforded by these approaches is principally attributable to high-precision fibular sectioning and insertion of the bone into a customised bone plate. CAD-CAM mandibular reconstruction procedures using vascularised bone free-flap transfers were performed on 10 patients with benign or malignant neoplasms. Five were not treated with the aid of CAD-CAM technology, and served as the control group. Five were scheduled for maxillofacial surgery using surgical cutting guides and customised bone plates. A generalised linear model for linear measures was used to compare the accuracy of reconstruction between the two groups. A difference, even though not significant, in the lateral shift of the mesial and distal positions of the fibular units was evident between groups. CAD-CAM-generated fibular surgical guides afford improved accuracy when used to restore native anatomy, especially in the context of mandibular arch restoration, and both operating room time and related costs are reduced during fibular sectioning. PMID:25434288

  18. The design and construction of the CAD-1 airship

    NASA Technical Reports Server (NTRS)

    Kleiner, H. J.; Schneider, R.; Duncan, J. L.

    1975-01-01

    The background history, design philosophy and Computer application as related to the design of the envelope shape, stress calculations and flight trajectories of the CAD-1 airship, now under construction by Canadian Airship Development Corporation are reported. A three-phase proposal for future development of larger cargo carrying airships is included.

  19. Introduction to CAD/Computers. High-Technology Training Module.

    ERIC Educational Resources Information Center

    Lockerby, Hugh

    This learning module for an eighth-grade introductory technology course is designed to help teachers introduce students to computer-assisted design (CAD) in a communications unit on graphics. The module contains a module objective and five specific objectives, a content outline, suggested instructor methodology, student activities, a list of six…

  20. Right approach to 3D modeling using CAD tools

    NASA Astrophysics Data System (ADS)

    Baddam, Mounica Reddy

    The thesis provides a step-by-step methodology to enable an instructor dealing with CAD tools to optimally guide his/her students through an understandable 3D modeling approach which will not only enhance their knowledge about the tool's usage but also enable them to achieve their desired result in comparatively lesser time. In the known practical field, there is particularly very little information available to apply CAD skills to formal beginners' training sessions. Additionally, advent of new software in 3D domain cumulates updating into a more difficult task. Keeping up to the industry's advanced requirements emphasizes the importance of more skilled hands in the field of CAD development, rather than just prioritizing manufacturing in terms of complex software features. The thesis analyses different 3D modeling approaches specified to the varieties of CAD tools currently available in the market. Utilizing performance-time databases, learning curves have been generated to measure their performance time, feature count etc. Based on the results, improvement parameters have also been provided for (Asperl, 2005).

  1. Present State of CAD Teaching in Spanish Universities

    ERIC Educational Resources Information Center

    Garcia, Ramon Rubio; Santos, Ramon Gallego; Quiros, Javier Suarez; Penin, Pedro I. Alvarez

    2005-01-01

    During the 1990s, all Spanish Universities updated the syllabuses of their courses as a result of the entry into force of the new Organic Law of Universities ("Ley Organica de Universidades") and, for the first time, "Computer Assisted Design" (CAD) appears in the list of core subjects (compulsory teaching content set by the government) in many of…

  2. Optical properties of manually and CAD/CAM-fabricated polymers.

    PubMed

    Güth, Jan-Frederik; Zuch, Timo; Zwinge, Sebastian; Engels, Jörg; Stimmelmayr, Michael; Edelhoff, Daniel

    2013-01-01

    The aim of this study was to compare the light translucency and fluorescence 5 manually and 11 CAD/CAM polymer materials to a glass-ceramic material. Light-transmission was measured using a spectrophotometer. Overall light transmission (n=40) was calculated as the integration (tc (λ) dλ [10(-5)]) of all tc values for the wavelengths from 400 to 700 nm. One-Way-ANOVA, (Scheffe's post hoc) revealed following light transmission values: Artbloc Temp (33.1%; A), Polycon ae (33.6%; A), Cercon base PMMA (38.3%; B), Luxatemp Fluorescence (40.7%; C), Protemp 4 (41.6%; C), Structur 2 SC (43.1%; D), CAD Temp (45.0%; E), Paradigm MZ 100 (45.4%; E), New Outline (45.6%,E), Ambarino High-Class (45.9%; E, F), Fixtemp C&B (46.1%; E, F, G), Lava Ultimate (47.1%; F, G), Telio-CAD (47.3%; G), glass-ceramic Vita Mark II (50.8%; H), New Outline CAD (52.1%; H, I), QUATTRO DISC Eco PMMA (53.0%; I) and Zenotec PMMA (54.5%, J). Polymers from conventional and industrial polymerization show widely varying translucent and fluorescent properties when compared with glass-ceramics of the same color. PMID:24240888

  3. Maxillary ridge augmentation with custom-made CAD/CAM scaffolds. A 1-year prospective study on 10 patients.

    PubMed

    Mangano, Francesco; Macchi, Aldo; Shibli, Jamil Awad; Luongo, Giuseppe; Iezzi, Giovanna; Piattelli, Adriano; Caprioglio, Alberto; Mangano, Carlo

    2014-10-01

    Several procedures have been proposed to achieve maxillary ridge augmentation. These require bone replacement materials to be manually cut, shaped, and formed at the time of implantation, resulting in an expensive and time-consuming process. In the present study, we describe a technique for the design and fabrication of custom-made scaffolds for maxillary ridge augmentation, using three-dimensional computerized tomography (3D CT) and computer-aided design/computer-aided manufacturing (CAD/CAM). CT images of the atrophic maxillary ridge of 10 patients were acquired and modified into 3D reconstruction models. These models were transferred as stereolithographic files to a CAD program, where a virtual 3D reconstruction of the alveolar ridge was generated, producing anatomically shaped, custom-made scaffolds. CAM software generated a set of tool-paths for manufacture by a computer-numerical-control milling machine into the exact shape of the reconstruction, starting from porous hydroxyapatite blocks. The custom-made scaffolds were of satisfactory size, shape, and appearance; they matched the defect area, suited the surgeon's requirements, and were easily implanted during surgery. This helped reduce the time for surgery and contributed to the good healing of the defects. PMID:23343341

  4. Aesthetic and functionality in fixed prosthodontic: sperimental and clinical analysis of the CAD-CAM systematic 3Shape

    PubMed Central

    DE VICO, G.; OTTRIA, L.; BOLLERO, P.; BONINO, M.; CIALONE, M.; BARLATTANI, A.; GARGARI, M.

    2009-01-01

    SUMMARY In the last 15 years the increasing aesthetic demand, push constantly industry and the clinical to entirely look for new solutions for the realization of all-ceramic crowns, with such characteristics to be used for both anterior and posterior restorations. The most greater contribution, in such sense derives from the finished progress in the computer sector, that have allowed the application of the technologies CAD-CAM, also in dentistry (2–5, 11). These systematics have allowed us to get “automatically” structures for dental prosthesis, starting from the scanning of the die and passing for an intermediary phase of computerized planning (CAD, computer aided design), through numerical control millers (CAM, computer aided manufacturing), enslaved to calculating the electronic that drives the movement of it. The aim of this work is therefore that to analyze and to describe the systematic computerized 3SHAPE verifying the degree of precision, through the analysis of the obtainable marginal closing with the zirconia frameworks. PMID:23285346

  5. Research on remote sensing image pixel attribute data acquisition method in AutoCAD

    NASA Astrophysics Data System (ADS)

    Liu, Xiaoyang; Sun, Guangtong; Liu, Jun; Liu, Hui

    2013-07-01

    The remote sensing image has been widely used in AutoCAD, but AutoCAD lack of the function of remote sensing image processing. In the paper, ObjectARX was used for the secondary development tool, combined with the Image Engine SDK to realize remote sensing image pixel attribute data acquisition in AutoCAD, which provides critical technical support for AutoCAD environment remote sensing image processing algorithms.

  6. Cam Design Projects in an Advanced CAD Course for Mechanical Engineers

    ERIC Educational Resources Information Center

    Ault, H. K.

    2009-01-01

    The objective of this paper is to present applications of solid modeling aimed at modeling of complex geometries such as splines and blended surfaces in advanced CAD courses. These projects, in CAD-based Mechanical Engineering courses, are focused on the use of the CAD system to solve design problems for applications in machine design, namely the…

  7. Computer-aided design system with artificial intelligence for automatic dimensioning

    SciTech Connect

    Huang, R.; Juricic, D.

    1995-12-31

    This paper is concerned with the methodology applicable to automating computer drafting tasks of a Computer-Aided Drafting and Design (CADD) system. One of the main characteristics of these tasks is the need for interaction with geometric models and their features. The specific drafting task considered in this paper was dimensioning of a multiview drawing. The paper illustrates the approach used and describes the introduction of relevant knowledge base as well as implementation of an inference engine internal to the drafting system. A simple class of objects was used to illustrate in more details the methods involved. It is noted that developing this methodology may be of vital importance for further automation of the drafting and design process.

  8. Integrated computer aided planning and manufacture of advanced technology jet engines

    NASA Astrophysics Data System (ADS)

    Subhas, B. K.; George, Chacko; Arul Raj, A.

    1987-10-01

    This paper highlights an attempt at evolving a computer aided manufacturing system on a personal computer. A case study of an advanced technology jet engine component is included to illustrate various outputs from the system. The proposed system could be an alternate solution to sophisticated and expensive CAD/CAM workstations.

  9. Computer-Aided Design (CAD) Tools to Support the Human Factors Design Teams

    NASA Technical Reports Server (NTRS)

    Null, Cynthia H.; Jackson, Mariea D.; Perry, Trey; Quick, Jason C.; Stokes, Jack W.

    2014-01-01

    The scope of this assessment was to develop a library of basic 1-Gravity (G) human posture and motion elements used to construct complex virtual simulations of ground processing and maintenance tasks for spaceflight vehicles, including launch vehicles, crewed spacecraft, robotic spacecraft, satellites, and other payloads. The report herein describes the task, its purpose, performance, findings, NASA Engineering and Safety Center (NESC) recommendations, and conclusions in the definition and assemblage of the postures and motions database (PMD).

  10. The genesis of the AIDS policy and AIDS Space in Brazil (1981-1989)

    PubMed Central

    de Barros, Sandra Garrido; Vieira-da-Silva, Ligia Maria

    2016-01-01

    ABSTRACT OBJECTIVE To analyze the genesis of the policy for controlling AIDS in Brazil. METHODS Socio-historical study (1981-1989), based on Bordieu’s genetic sociology, by document analysis, bibliographical review, and in-depth interviews. It consisted of a connection between the analysis of the paths of 33 agents involved in the creation of a social space focusing on AIDS-related issues and the historical possibility conditions of the drafting of a specific policy. RESULTS AIDS Space is a gathering point for the paths of agents from several social fields (medical, scientific, political, and bureaucratic fields). A specific space for relationships, which enabled the drafting of a policy for controlling the AIDS epidemic, but also a place where the authority to talk about the meaning of the disease, the methods to prevent and treat it was under dispute. The analysis showed how the various structures (democratic administrations in Sao Paulo and at the national level, with public health officers taking important positions) and the lack of a specific therapy contributed to social agents of different ranks and backgrounds to initially set prevention as a priority. CONCLUSIONS The rise of the sanitary movement, the organization of SUS, and the dominance of the medical field at the AIDS Space contributed to foster treatment as a part of the measures to control the epidemic. These conditions allowed drafting a policy based on the integrality of care, by linking prevention and treatment in the following decade, with important participation from state bureaucracy and researchers. PMID:27463255

  11. Computer-aided detection of lung cancer: combining pulmonary nodule detection systems with a tumor risk prediction model

    NASA Astrophysics Data System (ADS)

    Setio, Arnaud A. A.; Jacobs, Colin; Ciompi, Francesco; van Riel, Sarah J.; Winkler Wille, Mathilde M.; Dirksen, Asger; van Rikxoort, Eva M.; van Ginneken, Bram

    2015-03-01

    Computer-Aided Detection (CAD) has been shown to be a promising tool for automatic detection of pulmonary nodules from computed tomography (CT) images. However, the vast majority of detected nodules are benign and do not require any treatment. For effective implementation of lung cancer screening programs, accurate identification of malignant nodules is the key. We investigate strategies to improve the performance of a CAD system in detecting nodules with a high probability of being cancers. Two strategies were proposed: (1) combining CAD detections with a recently published lung cancer risk prediction model and (2) the combination of multiple CAD systems. First, CAD systems were used to detect the nodules. Each CAD system produces markers with a certain degree of suspicion. Next, the malignancy probability was automatically computed for each marker, given nodule characteristics measured by the CAD system. Last, CAD degree of suspicion and malignancy probability were combined using the product rule. We evaluated the method using 62 nodules which were proven to be malignant cancers, from 180 scans of the Danish Lung Cancer Screening Trial. The malignant nodules were considered as positive samples, while all other findings were considered negative. Using a product rule, the best proposed system achieved an improvement in sensitivity, compared to the best individual CAD system, from 41.9% to 72.6% at 2 false positives (FPs)/scan and from 56.5% to 88.7% at 8 FPs/scan. Our experiment shows that combining a nodule malignancy probability with multiple CAD systems can increase the performance of computerized detection of lung cancer.

  12. Computer aided diagnosis of diabetic peripheral neuropathy

    NASA Astrophysics Data System (ADS)

    Chekh, Viktor; Soliz, Peter; McGrew, Elizabeth; Barriga, Simon; Burge, Mark; Luan, Shuang

    2014-03-01

    Diabetic peripheral neuropathy (DPN) refers to the nerve damage that can occur in diabetes patients. It most often affects the extremities, such as the feet, and can lead to peripheral vascular disease, deformity, infection, ulceration, and even amputation. The key to managing diabetic foot is prevention and early detection. Unfortunately, current existing diagnostic techniques are mostly based on patient sensations and exhibit significant inter- and intra-observer differences. We have developed a computer aided diagnostic (CAD) system for diabetic peripheral neuropathy. The thermal response of the feet of diabetic patients following cold stimulus is captured using an infrared camera. The plantar foot in the images from a thermal video are segmented and registered for tracking points or specific regions. The temperature recovery of each point on the plantar foot is extracted using our bio-thermal model and analyzed. The regions that exhibit abnormal ability to recover are automatically identified to aid the physicians to recognize problematic areas. The key to our CAD system is the segmentation of infrared video. The main challenges for segmenting infrared video compared to normal digital video are (1) as the foot warms up, it also warms up the surrounding, creating an ever changing contrast; and (2) there may be significant motion during imaging. To overcome this, a hybrid segmentation algorithm was developed based on a number of techniques such as continuous max-flow, model based segmentation, shape preservation, convex hull, and temperature normalization. Verifications of the automatic segmentation and registration using manual segmentation and markers show good agreement.

  13. Using motion planning to determine the existence of an accessible route in a CAD environment.

    PubMed

    Pan, Xiaoshan; Han, Charles S; Law, Kincho H

    2010-01-01

    We describe an algorithm based on motion-planning techniques to determine the existence of an accessible route through a facility for a wheeled mobility device. The algorithm is based on LaValle's work on rapidly exploring random trees and is enhanced to take into consideration the particularities of the accessible route domain. Specifically, the algorithm is designed to allow performance-based analysis and evaluation of a facility. Furthermore, the parameters of a wheeled mobility device can be varied without recompilation, thus allowing standards writers, facility designers, and wheeled mobility device manufacturers to vary them accordingly. The algorithm has been implemented in a computer tool that works within a computer-aided design and drafting environment. PMID:20402045

  14. HIV/AIDS Basics

    MedlinePlus

    ... Enter ZIP code or city Follow Act Against AIDS Act Against AIDS @talkHIV Act Against AIDS Get Email Updates on AAA Anonymous Feedback HIV/AIDS Media Infographics Syndicated Content Podcasts Slide Sets HIV/ ...

  15. 46 CFR 32.05-1 - Draft marks and draft indicating systems-TB/ALL.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 1 2013-10-01 2013-10-01 false Draft marks and draft indicating systems-TB/ALL. 32.05-1 Section 32.05-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS SPECIAL EQUIPMENT, MACHINERY, AND HULL REQUIREMENTS Markings § 32.05-1 Draft marks and draft indicating systems—TB/ALL. (a)...

  16. 46 CFR 32.05-1 - Draft marks and draft indicating systems-TB/ALL.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Draft marks and draft indicating systems-TB/ALL. 32.05-1 Section 32.05-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS SPECIAL EQUIPMENT, MACHINERY, AND HULL REQUIREMENTS Markings § 32.05-1 Draft marks and draft indicating systems—TB/ALL. (a)...

  17. A Model Based Framework for Semantic Interpretation of Architectural Construction Drawings

    ERIC Educational Resources Information Center

    Babalola, Olubi Oluyomi

    2011-01-01

    The study addresses the automated translation of architectural drawings from 2D Computer Aided Drafting (CAD) data into a Building Information Model (BIM), with emphasis on the nature, possible role, and limitations of a drafting language Knowledge Representation (KR) on the problem and process. The central idea is that CAD to BIM translation is a…

  18. A two-view ultrasound CAD system for spina bifida detection using Zernike features

    NASA Astrophysics Data System (ADS)

    Konur, Umut; Gürgen, Fikret; Varol, Füsun

    2011-03-01

    In this work, we address a very specific CAD (Computer Aided Detection/Diagnosis) problem and try to detect one of the relatively common birth defects - spina bifida, in the prenatal period. To do this, fetal ultrasound images are used as the input imaging modality, which is the most convenient so far. Our approach is to decide using two particular types of views of the fetal neural tube. Transcerebellar head (i.e. brain) and transverse (axial) spine images are processed to extract features which are then used to classify healthy (normal), suspicious (probably defective) and non-decidable cases. Decisions raised by two independent classifiers may be individually treated, or if desired and data related to both modalities are available, those decisions can be combined to keep matters more secure. Even more security can be attained by using more than two modalities and base the final decision on all those potential classifiers. Our current system relies on feature extraction from images for cases (for particular patients). The first step is image preprocessing and segmentation to get rid of useless image pixels and represent the input in a more compact domain, which is hopefully more representative for good classification performance. Next, a particular type of feature extraction, which uses Zernike moments computed on either B/W or gray-scale image segments, is performed. The aim here is to obtain values for indicative markers that signal the presence of spina bifida. Markers differ depending on the image modality being used. Either shape or texture information captured by moments may propose useful features. Finally, SVM is used to train classifiers to be used as decision makers. Our experimental results show that a promising CAD system can be actualized for the specific purpose. On the other hand, the performance of such a system would highly depend on the qualities of image preprocessing, segmentation, feature extraction and comprehensiveness of image data.

  19. Large scale validation of the M5L lung CAD on heterogeneous CT datasets

    SciTech Connect

    Lopez Torres, E. E-mail: cerello@to.infn.it; Fiorina, E.; Pennazio, F.; Peroni, C.; Saletta, M.; Cerello, P. E-mail: cerello@to.infn.it; Camarlinghi, N.; Fantacci, M. E.

    2015-04-15

    Purpose: M5L, a fully automated computer-aided detection (CAD) system for the detection and segmentation of lung nodules in thoracic computed tomography (CT), is presented and validated on several image datasets. Methods: M5L is the combination of two independent subsystems, based on the Channeler Ant Model as a segmentation tool [lung channeler ant model (lungCAM)] and on the voxel-based neural approach. The lungCAM was upgraded with a scan equalization module and a new procedure to recover the nodules connected to other lung structures; its classification module, which makes use of a feed-forward neural network, is based of a small number of features (13), so as to minimize the risk of lacking generalization, which could be possible given the large difference between the size of the training and testing datasets, which contain 94 and 1019 CTs, respectively. The lungCAM (standalone) and M5L (combined) performance was extensively tested on 1043 CT scans from three independent datasets, including a detailed analysis of the full Lung Image Database Consortium/Image Database Resource Initiative database, which is not yet found in literature. Results: The lungCAM and M5L performance is consistent across the databases, with a sensitivity of about 70% and 80%, respectively, at eight false positive findings per scan, despite the variable annotation criteria and acquisition and reconstruction conditions. A reduced sensitivity is found for subtle nodules and ground glass opacities (GGO) structures. A comparison with other CAD systems is also presented. Conclusions: The M5L performance on a large and heterogeneous dataset is stable and satisfactory, although the development of a dedicated module for GGOs detection could further improve it, as well as an iterative optimization of the training procedure. The main aim of the present study was accomplished: M5L results do not deteriorate when increasing the dataset size, making it a candidate for supporting radiologists on large

  20. A complete CAD system for pulmonary nodule detection in high resolution CT images

    NASA Astrophysics Data System (ADS)

    Zhang, Xiangwei; McLennan, Geoffrey; Hoffman, Eric A.; Sonka, Milan

    2005-04-01

    The purpose of this study is to develop a computer-aided diagnosis (CAD) system to detect small-sized (from 2mm to 10mm) pulmonary nodules in high resolution helical CT scans. A new CAD system is proposed to locate both juxtapleural nodules and non-pleural nodules. Isotropic resampling and lung segmentation are performed as preprocessing steps. Morphological closing was utilized to smooth the lung contours to include the indented possible juxtapleural locations, thresholding and 3D component analysis were used to obtain 3D volumetric nodule candidates; furthermore, gray level and geometric features were extracted, and analyzed using linear discriminant analysis (LDA) classifier. Leave one case out method was used to evaluate the LDA. To deal with non-pleural nodules, a discrete-time cellular neural network (DTCNN) based on local shape features was developed. This scheme employed the local shape property to perform voxel classification. The shape index feature successfully captured the local shape difference between nodules and non-nodules, especially vessels. To tailor it for lung nodule detection, this DTCNN was trained using genetic algorithms (GAs) to derive the shape index variation pattern of nodules. Nonoverlapping training and testing sets were utilized in the non-pleural nodule detection. 19 clinical thoracic CT cases involving a total of 4838 sectional images were used in this work. The juxtapleural nodule detection method was able to obtain sensitivity 81.25% with an average of 8.29 FPs per case. The non-pleural nodule finding scheme attained sensitivity of 83.9% with an average 3.47 FPs/case. Combining the two subsystems together, an overall performance of 82.98% sensitivity with 11.76 FPs/case can be obtained.

  1. Dental Wings CAD/CAM system precision: an internal and marginal fit sperimental analisys

    PubMed Central

    SANNINO, G.; GLORIA, F.; SCHIAVETTI, R.; OTTRIA, L.; BARLATTANI, A.

    2010-01-01

    SUMMARY Statement of problem. The CAD-CAM technology has been developed to design and manufacture prosthetic structures with constant quality characteristics; in fact procedures are codified, manageable and repeatable. Purpose. The purpose of this in vitro study is to evaluate the internal and marginal gap of zirconia casts made with a new CAD-CAM systematic that use Dental Wings laser scanner and Yenamak milling machine. Material and methods. 6 analogs of solid abutments of Straumann implants were used, fixed in plexiglass bases. The samples were scanned by Dental Wings laser; the file obtained by scanning of each probe was sent to the Yenamak D40 milling machine, then the casts were sintered in Protherm furnace. Then 6 samples were cemented with resin luting agent capsules (Relyx Unicem, 3M ESPE). The samples were incorporated in transparent epoxy resin. After resin hardening, the cylinders obtained were cut with a microtomes. These slices thus obtained were then polished with a Polisher sander with alumina dust decreasing grain. Each section was observed and photographed in reflected light with the aid of an optic microscope type, first at low magnification and then at higher magnification. Results. The overall average fitting of copings on the abutments was 32,87 μ. No differences were found in marginal fit on buccal and lingual sides, it was easily predictable because of the standard form of the used stumps. The recorded values for the marginal fit were lower than those of axial walls. The accuracy of adaptation was always achieved within the limits of clinical acceptability. Conclusions. Within the limitations of this study, the system evaluated represents a valuable alternative to conventional prosthetic rehabilitation techniques. PMID:23285364

  2. A review of computer-aided diagnosis in thoracic and colonic imaging

    PubMed Central

    2012-01-01

    Medical imaging has been indispensable in medicine since the discovery of x-rays. Medical imaging offers useful information on patients’ medical conditions and on the causes of their symptoms and diseases. As imaging technologies advance, a large number of medical images are produced which physicians/radiologists must interpret. Thus, computer aids are demanded and become indispensable in physicians’ decision making based on medical images. Consequently, computer-aided detection and diagnosis (CAD) has been investigated and has been an active research area in medical imaging. CAD is defined as detection and/or diagnosis made by a radiologist/physician who takes into account the computer output as a “second opinion”. In CAD research, detection and diagnosis of lung and colorectal cancer in thoracic and colonic imaging constitute major areas, because lung and colorectal cancers are the leading and second leading causes, respectively, of cancer deaths in the U.S. and also in other countries. In this review, CAD of the thorax and colon, including CAD for detection and diagnosis of lung nodules in thoracic CT, and that for detection of polyps in CT colonography, are reviewed. PMID:23256078

  3. 46 CFR 32.05-1 - Draft marks and draft indicating systems-TB/ALL.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 1 2014-10-01 2014-10-01 false Draft marks and draft indicating systems-TB/ALL. 32.05-1 Section 32.05-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS SPECIAL EQUIPMENT, MACHINERY, AND HULL REQUIREMENTS Markings § 32.05-1 Draft marks and draft indicating systems—TB/ALL. (a) All vessels must have draft marks...

  4. Computer-aided detection of colonic polyps using volume rendering

    NASA Astrophysics Data System (ADS)

    Hong, Wei; Qiu, Feng; Marino, Joseph; Kaufman, Arie

    2007-03-01

    This work utilizes a novel pipeline for the computer-aided detection (CAD) of colonic polyps, assisting radiologists in locating polyps when using a virtual colonoscopy system. Our CAD pipeline automatically detects polyps while reducing the number of false positives (FPs). It integrates volume rendering and conformal colon flattening with texture and shape analysis. The colon is first digitally cleansed, segmented, and extracted from the CT dataset of the abdomen. The colon surface is then mapped to a 2D rectangle using conformal mapping. Using this colon flattening method, the CAD problem is converted from 3D into 2D. The flattened image is rendered using a direct volume rendering of the 3D colon dataset with a translucent transfer function. Suspicious polyps are detected by applying a clustering method on the 2D volume rendered image. The FPs are reduced by analyzing shape and texture features of the suspicious areas detected by the clustering step. Compared with shape-based methods, ours is much faster and much more efficient as it avoids computing curvature and other shape parameters for the whole colon wall. We tested our method with 178 datasets and found it to be 100% sensitive to adenomatous polyps with a low rate of FPs. The CAD results are seamlessly integrated into a virtual colonoscopy system, providing the radiologists with visual cues and likelihood indicators of areas likely to contain polyps, and allowing them to quickly inspect the suspicious areas and further exploit the flattened colon view for easy navigation and bookmark placement.

  5. 32 CFR 989.19 - Draft EIS.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... proponent in preparation of a preliminary draft EIS (PDEIS) (40 CFR 1502.9) based on the scope of issues... recommended in the CEQ regulations (40 CFR 1502.10 and 1502.11). The CEQ regulations indicate that EISs... review of draft EIS (40 CFR 1502.19 and 1506.6): (1) The public comment period for the draft EIS is...

  6. 32 CFR 989.19 - Draft EIS.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... proponent in preparation of a preliminary draft EIS (PDEIS) (40 CFR 1502.9) based on the scope of issues... recommended in the CEQ regulations (40 CFR 1502.10 and 1502.11). The CEQ regulations indicate that EISs... review of draft EIS (40 CFR 1502.19 and 1506.6): (1) The public comment period for the draft EIS is...

  7. 32 CFR 989.19 - Draft EIS.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... proponent in preparation of a preliminary draft EIS (PDEIS) (40 CFR 1502.9) based on the scope of issues... recommended in the CEQ regulations (40 CFR 1502.10 and 1502.11). The CEQ regulations indicate that EISs... review of draft EIS (40 CFR 1502.19 and 1506.6): (1) The public comment period for the draft EIS is...

  8. 32 CFR 989.19 - Draft EIS.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... proponent in preparation of a preliminary draft EIS (PDEIS) (40 CFR 1502.9) based on the scope of issues... recommended in the CEQ regulations (40 CFR 1502.10 and 1502.11). The CEQ regulations indicate that EISs... review of draft EIS (40 CFR 1502.19 and 1506.6): (1) The public comment period for the draft EIS is...

  9. 32 CFR 989.19 - Draft EIS.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... proponent in preparation of a preliminary draft EIS (PDEIS) (40 CFR 1502.9) based on the scope of issues... recommended in the CEQ regulations (40 CFR 1502.10 and 1502.11). The CEQ regulations indicate that EISs... review of draft EIS (40 CFR 1502.19 and 1506.6): (1) The public comment period for the draft EIS is...

  10. Mechnical Drawing/Drafting Curriculum Guide.

    ERIC Educational Resources Information Center

    Gregory, Margaret R.; Benson, Robert T.

    This curriculum guide consists of materials for teaching a course in mechanical drawing and drafting. Addressed in the individual units of the guide are the following topics: the nature and scope of drawing and drafting, visualization and spatial relationships, drafting tools and materials, linework, freehand lettering, geometric construction,…

  11. 29 CFR 1918.82 - Building drafts.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Building drafts. 1918.82 Section 1918.82 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Handling Cargo § 1918.82 Building drafts. (a) Drafts...

  12. 29 CFR 1918.82 - Building drafts.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 7 2013-07-01 2013-07-01 false Building drafts. 1918.82 Section 1918.82 Labor Regulations...) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Handling Cargo § 1918.82 Building drafts. (a) Drafts shall be built or means shall be taken to prevent cargo from falling from them. (b) Buckets and tubs...

  13. 29 CFR 1918.82 - Building drafts.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 7 2012-07-01 2012-07-01 false Building drafts. 1918.82 Section 1918.82 Labor Regulations...) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Handling Cargo § 1918.82 Building drafts. (a) Drafts shall be built or means shall be taken to prevent cargo from falling from them. (b) Buckets and tubs...

  14. 29 CFR 1918.82 - Building drafts.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 7 2011-07-01 2011-07-01 false Building drafts. 1918.82 Section 1918.82 Labor Regulations...) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Handling Cargo § 1918.82 Building drafts. (a) Drafts shall be built or means shall be taken to prevent cargo from falling from them. (b) Buckets and tubs...

  15. 29 CFR 1918.82 - Building drafts.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 7 2014-07-01 2014-07-01 false Building drafts. 1918.82 Section 1918.82 Labor Regulations...) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Handling Cargo § 1918.82 Building drafts. (a) Drafts shall be built or means shall be taken to prevent cargo from falling from them. (b) Buckets and tubs...

  16. 7 CFR 1488.13 - CCC drafts.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false CCC drafts. 1488.13 Section 1488.13 Agriculture... Export Sales of Agricultural Commodities From Private Stocks Under CCC Export Credit Sales Program (GSM-5) Bank Obligations and Repayment § 1488.13 CCC drafts. CCC will draw one draft for each payment due...

  17. 7 CFR 1488.13 - CCC drafts.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 10 2011-01-01 2011-01-01 false CCC drafts. 1488.13 Section 1488.13 Agriculture... Export Sales of Agricultural Commodities From Private Stocks Under CCC Export Credit Sales Program (GSM-5) Bank Obligations and Repayment § 1488.13 CCC drafts. CCC will draw one draft for each payment due...

  18. 7 CFR 1488.13 - CCC drafts.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 10 2012-01-01 2012-01-01 false CCC drafts. 1488.13 Section 1488.13 Agriculture... Agricultural Commodities From Private Stocks Under CCC Export Credit Sales Program (GSM-5) Bank Obligations and Repayment § 1488.13 CCC drafts. CCC will draw one draft for each payment due under bank obligations. If...

  19. 7 CFR 1488.13 - CCC drafts.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 10 2013-01-01 2013-01-01 false CCC drafts. 1488.13 Section 1488.13 Agriculture... Agricultural Commodities From Private Stocks Under CCC Export Credit Sales Program (GSM-5) Bank Obligations and Repayment § 1488.13 CCC drafts. CCC will draw one draft for each payment due under bank obligations. If...

  20. 7 CFR 1488.13 - CCC drafts.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 10 2014-01-01 2014-01-01 false CCC drafts. 1488.13 Section 1488.13 Agriculture... Agricultural Commodities From Private Stocks Under CCC Export Credit Sales Program (GSM-5) Bank Obligations and Repayment § 1488.13 CCC drafts. CCC will draw one draft for each payment due under bank obligations. If...