Science.gov

Sample records for air bag deployment

  1. Burn injuries caused by air bag deployment.

    PubMed

    Ulrich, D; Noah, E M; Fuchs, P; Pallua, N

    2001-03-01

    Automobile air bags have gained acceptance as an effective measure to reduce the morbidity and mortality associated with motor vehicle accidents. As more cars have become equipped with them, new problems have been encountered that are directly attributable to the deployment of the bag itself. An increasing variety of associated injuries has been reported, including minor burns. We present two automobile drivers who were involved in front-impact crashes with air bag inflation. They sustained superficial and partial-thickness burns related to the deployment. The evaluation of these cases shows mechanisms involved in burn injuries caused by the air bag system. Most of the burns are chemical and usually attributed to sodium hydroxide in the aerosol created during deployment. Also direct thermal burns from high-temperature gases or indirect injuries due to the melting of clothing, as well as friction burns from physical contact are possible. However, the inherent risks of air bag-related burns are still outweighed by the benefits of preventing potentially life-threatening injuries. PMID:11226663

  2. Permanent bilateral acoustic trauma due to air bag deployment in a young female adult.

    PubMed

    Kastanioudakis, Ioannis; Exarchakos, Georgios; Ziavra, Nausica; Skevas, Antonios

    2003-02-01

    Air bag safety systems have significantly reduced the number of occupant injuries from road traffic accidents (RTA). However air bag deployment is also associated with unavoidable risks. We report the acoustic trauma incurred by a young female driver who was a heavy smoker as a consequence of air-bag deployment in a low speed RTA and the sparing of her child seated in the rear. PMID:12625890

  3. Advanced Air Bag Technology Assessment

    NASA Technical Reports Server (NTRS)

    Phen, R. L.; Dowdy, M. W.; Ebbeler, D. H.; Kim. E.-H.; Moore, N. R.; VanZandt, T. R.

    1998-01-01

    proximity of the occupants to the airbag module; (5) the deployment time, which includes the time to sense the need for deployment, the inflator response parameters, the air bag response, and the reliability of the air bag. The requirements for an advanced air bag technology is discussed. These requirements includes that the system use information related to: (1) the crash severity; (2) the status of belt usage; (3) the occupant category; and (4) the proximity to the air bag to adjust air bag deployment. The parameters for the response of the air bag are: (1) deployment time; (2) inflator parameters; and (3) air bag response and reliability. The state of occupant protection advanced technology is reviewed. This review includes: the current safety restraint systems, and advanced technology characteristics. These characteristics are summarized in a table, which has information regarding the technology item, the potential, and an date of expected utilization. The use of technology and expertise at NASA centers is discussed. NASA expertise relating to sensors, computing, simulation, propellants, propulsion, inflatable systems, systems analysis and engineering is considered most useful. Specific NASA technology developments, which were included in the study are: (1) a capacitive detector; (2) stereoscopic vision system; (3) improved crash sensors; (4) the use of the acoustic signature of the crash to determine crash severity; and (5) the use of radar antenna for pre-crash sensing. Information relating to injury risk assessment is included, as is a summary of the areas of the technology which requires further development.

  4. Air bag restraint device

    DOEpatents

    Marts, D.J.; Richardson, J.G.

    1995-10-17

    A rear-seat air bag restraint device is disclosed that prevents an individual, or individuals, from continuing violent actions while being transported in a patrol vehicle`s rear seat without requiring immediate physical contact by the law enforcement officer. The air bag is activated by a control switch in the front seat and inflates to independently restrict the amount of physical activity occurring in the rear seat of the vehicle while allowing the officer to safely stop the vehicle. The air bag can also provide the officer additional time to get backup personnel to aid him if the situation warrants it. The bag is inflated and maintains a constant pressure by an air pump. 8 figs.

  5. Air bag restraint device

    DOEpatents

    Marts, Donna J.; Richardson, John G.

    1995-01-01

    A rear-seat air bag restraint device is disclosed that prevents an individual, or individuals, from continuing violent actions while being transported in a patrol vehicle's rear seat without requiring immediate physical contact by the law enforcement officer. The air bag is activated by a control switch in the front seat and inflates to independently restrict the amount of physical activity occurring in the rear seat of the vehicle while allowing the officer to safely stop the vehicle. The air bag can also provide the officer additional time to get backup personnel to aid him if the situation warrants it. The bag is inflated and maintains a constant pressure by an air pump.

  6. Air bags and ocular injuries.

    PubMed Central

    Stein, J D; Jaeger, E A; Jeffers, J B

    1999-01-01

    PURPOSE: This investigation retrospectively examined ocular injuries associated with air bag deployment to gain a better appreciation of potential risk factors in motor vehicle accidents. National statistics regarding the efficacy of air bags were reviewed. METHODS: Review of the literature from 1991 to 1998 identified 44 articles describing 97 patients with air-bag-induced ocular injuries. Variables extracted from each case were age, sex, height, position in the car, eye wear, vehicle impact speed, visual acuity, and specific ocular injuries. RESULTS: Corneal abrasions occurred in 49% of occupants, hyphemas in 43%, vitreous or retinal hemorrhages in 25%, and retinal tears or detachments in 15%. The globe was ruptured in 10 patients. Patients involved in higher-speed accidents (over 30 mph) sustained a greater percentage of vitreous or retinal hemorrhages and traumatic cataracts, while those at slower speeds were more prone to retinal tears or detachments. In a subset of 14 patients with serious ocular injuries, the impact speed of 11 patients was recorded at 30 mph or less. Slower speed may be a risk factor for some ocular injuries. Occupant height was not a significant factor. National statistics confirm that air bags reduce fatalities in motor vehicle accidents. However, children sitting in the front seat without a seat belt and infants in passenger-side rear-facing car seats are at risk for fatal injury. CONCLUSION: Air bags combined with seat belts are an effective means of reducing injury and death in adults during motor vehicle accidents. However, this study has documented a wide variety of ocular injuries associated with air bag deployment. It is hoped that researchers can develop modifications that continue to save lives while minimizing additional harm. Images FIGURE 1 FIGURE 2A FIGURE 2B FIGURE 2C FIGURE 2D FIGURE 3A FIGURE 3B FIGURE 4 FIGURE 5 FIGURE 7 FIGURE 8 PMID:10703118

  7. Air Bag Installation

    NASA Technical Reports Server (NTRS)

    2003-01-01

    May 10, 2003Prelaunch at Kennedy Space Center

    On Mars Exploration Rover 1 (MER-1) , air bags are installed on the lander. The airbags will inflate to cushion the landing of the spacecraft on the surface of Mars. When it stops bouncing and rolling, the airbags will deflate and retract, the petals will open to bring the lander to an upright position, and the rover will be exposed. NASA's twin Mars Exploration Rovers are designed to study the history of water on Mars. These robotic geologists are equipped with a robotic arm, a drilling tool, three spectrometers, and four pairs of cameras that allow them to have a human-like, 3D view of the terrain. Each rover could travel as far as 100 meters in one day to act as Mars scientists' eyes and hands, exploring an environment where humans can't yet go. MER-1 is scheduled to launch June 25 as MER-B aboard a Delta II rocket from Cape Canaveral Air Force Station.

  8. Driver air bag effectiveness by severity of the crash.

    PubMed Central

    Segui-Gomez, M

    2000-01-01

    OBJECTIVES: This analysis provided effectiveness estimates of the driver-side air bag while controlling for severity of the crash and other potential confounders. METHODS: Data were from the National Automotive Sampling System (1993-1996). Injury severity was described on the basis of the Abbreviated Injury Scale, Injury Severity Score, Functional Capacity Index, and survival. Ordinal, linear, and logistic multivariate regression methods were used. RESULTS: Air bag deployment in frontal or near-frontal crashes decreases the probability of having severe and fatal injuries (e.g., Abbreviated Injury Scale score of 4-6), including those causing a long-lasting high degree of functional limitation. However, air bag deployment in low-severity crashes increases the probability that a driver (particularly a woman) will sustain injuries of Abbreviated Injury Scale level 1 to 3. Air bag deployment exerts a net injurious effect in low-severity crashes and a net protective effect in high-severity crashes. The level of crash severity at which air bags are protective is higher for female than for male drivers. CONCLUSIONS: Air bag improvement should minimize the injuries induced by their deployment. One possibility is to raise their deployment level so that they deploy only in more severe crashes. PMID:11029991

  9. Air bags: lifesaving with toxic potential?

    PubMed

    Swanson-Biearman, B; Mrvos, R; Dean, B S; Krenzelok, E P

    1993-01-01

    Federal Motor Vehicle Safety Standard No. 208, "Occupant Crash Protection", requires that all passenger cars manufactured after September 1, 1989 be equipped with automatic crash protection. Car manufacturers met this requirement by installing automatic safety belts or air bags. No chemical injuries have been reported as a result of air bag deployment in motor vehicle accidents (MVA). A 6-month retrospective study was conducted to evaluate the toxic effects of the white powdery residue from air bags, a combination of talc and sodium hydroxide, found in the driver compartment after an MVA. The study reviewed time to onset of symptoms, symptomatology, and treatment. The study included seven patients exposed to deployed air bags after an MVA. Four cases resulted in dermal burns and three patients were diagnosed with unrelated injuries. Three patients presented to an emergency department within 48 hours of the exposure complaining of burns to the skin. Two patients attempted home therapy but became concerned when the symptoms did not subside. One patient was discharged with the diagnosis of first degree burns of the chin and left hand. Another patient experienced bilateral hand erythema and blisters. Standard burn therapy was instituted in both instances. A third patient arrived 1 hour post-exposure to the emergency department complaining of a burning sensation to the hands, but the skin appeared normal. Thorough irrigation was initiated and Silvadene (Marion, Kansas City, MO) applied. One patient notified the poison center 1 hour post-exposure complaining of erythema and burning to his hands after an MVA.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:8447868

  10. 49 CFR 173.166 - Air bag inflators, air bag modules and seat-belt pretensioners.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Non-bulk Packaging for Hazardous Materials Other... manufacturer has submitted each design type air bag inflator, air bag module, or seat-belt pretensioner to a... or pretensioner design type for which approval is sought and details on the complete package....

  11. 49 CFR 173.166 - Air bag inflators, air bag modules and seat-belt pretensioners.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS...) Definitions. An air bag inflator (consisting of a casing containing an igniter, a booster material, a gas... suitable material, or other dedicated handling devices are authorized for shipment of air bag...

  12. 49 CFR 173.166 - Air bag inflators, air bag modules and seat-belt pretensioners.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS...) Definitions. An air bag inflator (consisting of a casing containing an igniter, a booster material, a gas... suitable material, or other dedicated handling devices are authorized for shipment of air bag...

  13. 49 CFR 173.166 - Air bag inflators, air bag modules and seat-belt pretensioners.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS...) Definitions. An air bag inflator (consisting of a casing containing an igniter, a booster material, a gas... used in the operation of a seat-belt restraining system in a motor vehicle. (b) Classification. An...

  14. 49 CFR 173.166 - Air bag inflators, air bag modules and seat-belt pretensioners.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS...) Definitions. An air bag inflator (consisting of a casing containing an igniter, a booster material, a gas... used in the operation of a seat-belt restraining system in a motor vehicle. (b) Classification. An...

  15. Update: fatal air bag-related injuries to children--United States, 1993-1996.

    PubMed

    1996-12-13

    Dual air bags will be required standard equipment in all new passenger cars sold in the United States beginning in 1997 and all light trucks sold in the United States in 1998 but are available now in many earlier-model vehicles. Air bags are designed to supplement the protection provided by safety belts in frontal crashes; when combined with lap and shoulder safety belts, air bags assist in preventing fatal and nonfatal injuries in motor-vehicle crashes. However, passenger-side air bags have been associated with injuries to children who, in almost all cases, were unrestrained or incorrectly restrained in the front seat. In 1993, approximately 1.4 million (0.8% of all vehicles registered) were equipped with passenger-side air bags, compared with an estimated 21.6 million vehicles (11.4% of all vehicles registered) in 1996 (National Highway Traffic Safety Administration [NHTSA], unpublished data, 1996). NHTSA, the National Transportation Safety Board (NTSB), and CDC collaborated with the American Academy of Pediatrics, the Children's Hospital of Philadelphia, The Air Bag Safety Campaign, the National Safety Council, the Brain Injury Association, the National Association of Governors Highway Safety Representatives, the National Association of Children's Hospitals and Related Institutions, and the Health Resources and Services Administration to examine crashes from the Special Crash Investigation Data File maintained by NHTSA, in which fatal injuries in children (aged < 12 years) were associated with passenger-side air bags. This report presents the findings of this review, which indicate that during January 1993-November 1996, annual increases occurred for both the number of fatal injuries to children resulting from air-bag deployments and the proportion of dual air bag-equipped vehicles (Table 1). PMID:8975120

  16. Deployable Engine Air Brake

    NASA Technical Reports Server (NTRS)

    2014-01-01

    On approach, next-generation aircraft are likely to have airframe noise levels that are comparable to or in excess of engine noise. ATA Engineering, Inc. (ATA) is developing a novel quiet engine air brake (EAB), a device that generates "equivalent drag" within the engine through stream thrust reduction by creating a swirling outflow in the turbofan exhaust nozzle. Two Phase II projects were conducted to mature this technology: (1) a concept development program (CDP) and (2) a system development program (SDP).

  17. [Awareness of the risk of air bag-associated injuries essential].

    PubMed

    Björnstig, Ulf; Haraldsson, Per-Olle; Polland, Werner; Sandström, Thomas

    2002-07-11

    Restraint systems, such as air bags and seat belts with pretensioners, reduce effectively the risk of serious injuries of car occupants. However, this equipment may have some adverse effects. In a frontal air bag deployment the cushion expands with a speed of about 200 km/h towards the driver. A person within the expansion zone, i.e. within 20 centimetres from the steering wheel hub, may experience a considerable injury risk. Short people, pregnant women and people "out of normal position" are especially at risk, as well as paramedics exposed for accidentally deployed air bags during rescue work. The gas generator in the air bag produces nitrogen in a chemical process. However, small amounts of NaOH (caustic soda) may leak out of the gas generator and may contaminate eyes and wounds and cause injuries and delay healing. The air bag gases may provoke an asthmatic attack in sensible individuals and a few will experience a hearing loss, often in the range of 4,000-6,000 Hz, from the sound impulse that may reach a level of 170 dB. Correct handling, based on a familiarity of the effects and side effects of modern restraint systems, would minimise the risk of adverse effects of this safety equipment. PMID:12170512

  18. 76 FR 47641 - Pagani Automobili SpA; Denial of Application for Temporary Exemption From Advanced Air Bag...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-05

    ... Ltd., 76 FR 33406 (June 8, 2011) (manufacturer has another model that fully complies with the advanced... risks presented by air bag deployment. \\6\\ See 65 FR 30680 (May 12, 2000). The issuance of the advanced... petition of Panoz, 72 FR 28759 (May 22, 2007); Grant of petition of Koenigsegg Automotive AB, 72 FR...

  19. Prototype air bag restraint for use in patrol vehicles

    SciTech Connect

    Marts, D.J.; Barker, S.G.

    1995-03-01

    An air bag has been designed and laboratory tested for use in existing police vehicles that will restrain a person if he or she becomes violent. The device will prevent self-injury and protect the vehicle and officer. The device does not pose a suffocation hazard and can be quickly and easily inflated or deflated by the officer from the front seat. The device is ready for field testing.

  20. Report of the Building 9207 air bag test

    SciTech Connect

    Huff, T.E.; Fricke, K.E.; Jones, W.D.

    1992-12-01

    As part of a major testing program now underway at the Department of Energy`s (DOE) Oak Ridge Y-12 Plant, managed by Martin Marietta Energy Systems, Inc. (MMES), a full-scale air bag test was conducted in Building 9207. The test program, supported and managed by the Center for Natural Phenomena Engineering (CNPE), is intended to determine the stiffness and strength of unreinforced hollow clay tile walls (HCTVS) in order to more accurately analyze and predict the response of buildings containing these type of walls, especially when subjected to seismic and high wind loadings. The air bag test was a very large undertaking that started more than a year before the test was actually performed. Preparation for the test included the following activities: (1) preparation of the wall and the adjacent building areas; (2) design and field fabrication of test supporting structures; (3) procurement of equipment and instrumentation; (4) development of supporting test procedures and checklists; (5) installation of over seventy linear variable differential transformers (LVDTs) and strain gages; (6) development of computer programs for use in the data acquisition systems; (7) extensive review into the existing engineering literature; (8) discussions with researchers with prior experience performing air bag tests; (9) coordination with the building operators; (10) plant safety reviews; and (11) dry runs of the test itself.

  1. Evaluation of passive diffusion bag and dialysis samplers in selected wells at Hickam Air Force Base, Hawaii, July 2001

    USGS Publications Warehouse

    Vroblesky, Don A.; Pravecek, Tasha

    2002-01-01

    Field comparisons of chemical concentrations obtained from dialysis samplers, passive diffusion bag samplers, and low-flow samplers showed generally close agreement in most of the 13 wells tested during July 2001 at Hickam Air Force Base, Hawaii. The data for chloride, sulfate, iron, alkalinity, arsenic, and methane appear to show that the dialysis samplers are capable of accurately collecting a passive sample for these constituents. In general, the comparisons of volatile organic compound concentrations showed a relatively close correspondence between the two different types of diffusion samples and between the diffusion samples and the low-flow samples collected in most wells. Divergence appears to have resulted primarily from the pumping method, either producing a mixed sample or water not characteristic of aquifer water moving through the borehole under ambient conditions. The fact that alkalinity was not detected in the passive diffusion bag samplers, highly alkaline waters without volatilization loss from effervescence, which can occur when a sample is acidified for preservation. Both dialysis and passive diffusion bag samplers are relatively inexpensive and can be deployed rapidly and easily. Passive diffusion bag samplers are intended for sampling volatile organic compounds only, but dialysis samplers can be used to sample both volatile organic compounds and inorganic solutes. Regenerated cellulose dialysis samplers, however, are subject to biodegradation and probably should be deployed no sooner than 2 weeks prior to recovery. 1 U.S. Geological Survey, Columbia, South Carolina. 2 Air Florce Center for Environmental Excellence, San Antionio, Texas.

  2. 49 CFR Appendix C to Part 595 - Installation of Air Bag On-Off Switches

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Installation of Air Bag On-Off Switches C Appendix... HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) MAKE INOPERATIVE EXEMPTIONS Pt. 595, App. C Appendix C to Part 595—Installation of Air Bag On-Off Switches ER21NO97.012...

  3. 75 FR 57549 - Fisker Automotive; Grant of Application for Temporary Exemption From Advanced Air Bag...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-21

    ... requirements submitted by a manufacturer of a plug-in hybrid electric car. The basis of the petition was..., especially in low- speed crashes. \\1\\ See 65 FR 30680 (May 12, 2000). The advanced air bag requirements were... developing advanced air bag systems. \\2\\ See, e.g., grant of petition to Panoz, 72 FR 28759 (May 22,...

  4. 78 FR 65426 - Technical Report: Evaluation of the Certified-Advanced Air Bags

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-31

    ... SAFETY ADMINISTRATION Technical Report: Evaluation of the Certified-Advanced Air Bags AGENCY: National... reviewing and evaluating certified-advanced air bags. The report's title is: Evaluation of the Certified... Statistician, Evaluation Division, NVS-431, National Center for Statistics and Analysis, National...

  5. 49 CFR Appendix C to Part 595 - Installation of Air Bag On-Off Switches

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 7 2011-10-01 2011-10-01 false Installation of Air Bag On-Off Switches C Appendix C to Part 595 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL... EXEMPTIONS Pt. 595, App. C Appendix C to Part 595—Installation of Air Bag On-Off Switches ER21NO97.012...

  6. 77 FR 69927 - Safety Advisory Notice: Safety Advisory for Shippers and Carriers of Air Bags

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-21

    ...PHMSA has been alerted by the National Highway Traffic Safety Administration (NHTSA) that counterfeit air bags have been sold as replacement parts to consumers and repair professionals. These counterfeit products may contain unapproved explosives and thus pose additional transportation risks when compared to air bags manufactured through legitimate means. Therefore, PHMSA is issuing this......

  7. Effect of vehicle type on the performance of second generation air bags for child occupants.

    PubMed

    Arbogast, Kristy B; Durbin, Dennis R; Kallan, Michael J; Winston, Flaura K

    2003-01-01

    Passenger air bags experienced considerable design modification in the late 1990s, principally to mitigate risks to child passengers. This study utilized Data from the Partners for Child Passenger Safety study, a large-scale child-focused crash surveillance system, to examine the effect of vehicle type on the differential performance of first and second generation air bags on injuries to restrained children in frontal impact crashes. Our results show that the benefit of second-generation air bags was seen in passenger cars - those children exposed to second-generation air bags were half as likely to sustain a serious injury - and minivans. However, in SUVs the data suggest no reduction in injury risk with the new designs. This field data provides crucial real-world experience to the automotive industry as they work towards the next generation of air bag designs. PMID:12941218

  8. Prediction of air temperature for thermal comfort of people using sleeping bags: a review

    NASA Astrophysics Data System (ADS)

    Huang, Jianhua

    2008-11-01

    Six models for determining air temperatures for thermal comfort of people using sleeping bags were reviewed. These models were based on distinctive metabolic rates and mean skin temperatures. All model predictions of air temperatures are low when the insulation values of the sleeping bag are high. Nevertheless, prediction variations are greatest for the sleeping bags with high insulation values, and there is a high risk of hypothermia if an inappropriate sleeping bag is chosen for the intended conditions of use. There is, therefore, a pressing need to validate the models by wear trial and determine which one best reflects ordinary consumer needs.

  9. Efficacy of side air bags in reducing driver deaths in driver-side collisions.

    PubMed

    Braver, Elisa R; Kyrychenko, Sergey Y

    2004-03-15

    Side air bags, a relatively new technology designed to protect the head and/or torso in side-impact collisions, are becoming increasingly common in automobiles. Their efficacy in preventing US driver deaths among cars struck on the near (driver's) side was examined using data from the Fatality Analysis Reporting System and the General Estimates System. Risk ratios for driver death per nearside collision during 1999-2001 were computed for head/torso and torso-only side air bags in cars from model years 1997-2002, relative to cars without side air bags. Confounding was addressed by adjusting nearside risk ratios for front- and rear-impact mortality, which is unaffected by side air bags. Risk ratios were 0.55 (95% confidence interval: 0.43, 0.71) for head/torso air bags and 0.89 (95% confidence interval: 0.79, 1.01) for torso-only air bags. Risk was reduced when cars with head/torso air bags were struck by cars/minivans (significant) or pickup trucks/sport utility vehicles (nonsignificant). Risk was reduced in two-vehicle collisions and among male drivers and drivers aged 16-64 years. Protective effects associated with torso-only air bags were observed in single-vehicle crashes and among male and 16- to 64-year-old drivers. Head/torso side air bags appear to be very effective in reducing nearside driver deaths, whereas torso-only air bags appear less protective. PMID:15003959

  10. Automobile driver fatalities in frontal impacts: air bags compared with manual belts.

    PubMed Central

    Zador, P L; Ciccone, M A

    1993-01-01

    OBJECTIVES. The effectiveness of air bags was estimated in this study by comparing driver fatalities in frontal crashes with driver fatalities in nonfrontal crashes, for cars with air bags and manual belts and cars with manual belts only. METHODS. Fatal Accident Reporting System data for drivers fatally injured during 1985 to 1991 in 1985 to 1991 model year cars that were equipped with air bags in or before model year 1991 were analyzed. RESULTS. Driver fatalities in frontal crashes in air bag cars were 28% lower than those in comparable cars with manual belts only. This percentage was used for estimating the overall fatality reduction in air bag cars. The reduction was greater in large cars (50%) than in midsize cars (19%) or in small cars (14%). Air bags reduced driver fatalities in frontal crashes involving ejection by about 9%. Fatalities in frontal crashes among drivers who were reportedly using manual belts at the time of the crash were reduced by about 15%. The comparable reduction among drivers who were reportedly not using manual belts was 31%. CONCLUSION. It was estimated that air bags reduced the total number of all driver fatalities by about 19%. PMID:8484445

  11. Association of driver air bags with driver fatality: a matched cohort study

    PubMed Central

    Cummings, Peter; McKnight, Barbara; Rivara, Frederick P; Grossman, David C

    2002-01-01

    Objective To estimate the association of driver air bag presence with driver fatality in road traffic crashes. Design Matched pair cohort study. Setting All passenger vehicle crashes in the United States during 1990-2000 inclusive. Subjects 51 031 driver-passenger pairs in the same vehicle. Main outcome measures Relative risk of death within 30 days of a crash. Results Drivers with an air bag were less likely to die than drivers without an air bag (adjusted relative risk 0.92 (95% confidence interval 0.88 to 0.96)). This estimate was nearly the same whether drivers wore a seat belt (adjusted relative risk 0.93) or not (0.91). Air bags were associated with more protection for women (0.88 (0.82 to 0.93)), than for men (0.94 (0.90 to 0.99)). Drivers wearing a seat belt were less likely to die than unbelted drivers (0.35 (0.33 to 0.36)). Belted drivers with an air bag were less likely to die than unbelted drivers without an air bag (0.32 (0.30 to 0.34)). Conclusions If the associations are causal the average risk of driver death was reduced 8% (95% confidence interval 4% to 12%) by an air bag. Benefit was similar for belted and unbelted drivers and was slightly greater for women. However, seat belts offered much more protection than air bags. What is already known on this topicStudies have estimated that driver air bags reduce the risk of death in a road vehicle crash by 10-14%These studies disagree as to whether benefit is greater for drivers wearing a seat belt or for unbelted driversWhat this study addsHaving an air bag was associated with an 8% reduction in the risk of death, whether the driver was belted or notThe reduction in risk was greater for women (12%) than for men (6%)Seat belts provided much greater protection, with seat belt use reducing the risk of death by 65% (or by 68% in combination with an air bag) PMID:12003882

  12. Vented spikes improve delivery from intravenous bags with no air headspace.

    PubMed

    Galush, William J; Horst, Travis A

    2015-07-01

    Flexible plastic bags are the container of choice for most intravenous (i.v.) infusions. Under certain circumstances, however, the air-liquid interface present in these i.v. bags can lead to physical instability of protein biopharmaceuticals, resulting in product aggregation. In principle, the air headspace present in the bags can be removed to increase drug stability, but experiments described here show that this can result in incomplete draining of solution from the bag using gravity delivery, or generation of negative pressure in the bag when an infusion pump is used. It is expected that these issues could lead to incomplete delivery of medication to patients or pump-related problems, respectively. However, here it is shown that contrary to the standard pharmacy practice of using nonvented spikes with i.v. bags, the use of vented spikes with i.v. bags that lack air headspace allows complete delivery of the dose solution without impacting the physical stability of a protein-based drug. PMID:25953689

  13. Linear analysis of the heave dynamics of a bag and finger air cushion vehicle skirt

    NASA Astrophysics Data System (ADS)

    Ma, T.; Sullivan, P. A.

    1986-09-01

    A linear analysis of the heave dynamics of an air-cushion vehicle bag and finger skirt is presented. A simplified geometry is considered; this is a two-dimensional section of the skirt without interior compartmentation. The bag is modeled as a membrane having distributed mass and viscoelasticity, and the fingers are modeled as rigid bodies having both mass and moment of inertia. A finite-element technique is used to discretize the equations of motion of the bag, but otherwise standard linear analysis techniques are used to obtain predictions of frequency response and stability characteristics. The stability results confirm the experimental observation that the dominant factor controlling the onset of skirt bounce is the bag-to-cushion pressure ratio.

  14. 75 FR 51870 - Wheego Electric Cars, Inc.; Receipt of Application for Temporary Exemption From Advanced Air Bag...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-23

    ... low- speed crashes. \\2\\ See 65 FR 30680 (May 12, 2000). The advanced air bag requirements were a... developing advanced air bag systems. \\3\\ See, e.g., grant of petition to Panoz, 72 FR 28759 (May 22, 2007), or grant of petition to Koenigsegg, 72 FR 17608 (April 9, 2007). The agency has carefully...

  15. 76 FR 7898 - Wheego Electric Cars, Inc.; Grant of Application for Temporary Exemption From Advanced Air Bag...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-11

    .... \\1\\ See 65 FR 30680 (May 12, 2000). The advanced air bag requirements were a culmination of a... developing advanced air bag systems. \\2\\ See, e.g., grant of petition to Panoz, 72 FR 28759 (May 22, 2007), or grant of petition to Koenigsegg, 72 FR 17608 (April 9, 2007). The agency has carefully...

  16. Electronic Nose and Use of Bags to Collect Odorous Air Samples in Meat Quality Analysis

    NASA Astrophysics Data System (ADS)

    Sala, G.; Masoero, G.; Battaglini, L. M.; Cornale, P.; Barbera, S.

    2009-05-01

    To test EN reliability and use of bags on meat, 17 bulls (one group of 9 and one of 8) fed similarly, except for a supplementary feedingstuff, were used. Samples were prepared according to the MCS protocol and repeated three times on different days for a total of 51 samples. Bags were used to collect raw and cooked meat air samples, and to test odour changes among samples analysed at different times. The first time analysis was performed immediately after collection then was repeated, 1 hour, 1 day and 1 week later. The Electronic Nose is very discriminant and clear differences were evident among raw, cooked and bags odorous profiles. The highest values were found in cooked samples and the broad range class (W5S) was the most representative. The EN also recognized the two tested feed treatments. In the cooked samples, all sensor responses decrease while time enhances, indicating a progressive chemical variation of the air composition in the bag, with a less correlation shown in the raw samples. When using bags, to avoid bias, is important to fix analysis in order to obtain useful results.

  17. Modeling and Simulation of the Second-Generation Orion Crew Module Air Bag Landing System

    NASA Technical Reports Server (NTRS)

    Timmers, Richard B.; Welch, Joseph V.; Hardy, Robin C.

    2009-01-01

    Air bags were evaluated as the landing attenuation system for earth landing of the Orion Crew Module (CM). An important element of the air bag system design process is proper modeling of the proposed configuration to determine if the resulting performance meets requirements. Analysis conducted to date shows that airbags are capable of providing a graceful landing of the CM in nominal and off-nominal conditions such as parachute failure, high horizontal winds, and unfavorable vehicle/ground angle combinations. The efforts presented here surround a second generation of the airbag design developed by ILC Dover, and is based on previous design, analysis, and testing efforts. In order to fully evaluate the second generation air bag design and correlate the dynamic simulations, a series of drop tests were carried out at NASA Langley's Landing and Impact Research (LandIR) facility. The tests consisted of a full-scale set of air bags attached to a full-scale test article representing the Orion Crew Module. The techniques used to collect experimental data, construct the simulations, and make comparisons to experimental data are discussed.

  18. 77 FR 52619 - Make Inoperative Exemptions; Retrofit On-Off Switches for Air Bags

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-30

    ... June 8, 2012 Notice of Proposed Rulemaking (77 FR 33998). To prevent or mitigate the risk of injuries... 21, 1997, NHTSA published in the Federal Register (62 FR 62406) a final rule permitting motor vehicle... FMVSS.\\3\\ \\2\\ See preamble to agency final rule on advanced air bags, 65 FR 30680, 30682-83, May...

  19. 77 FR 33998 - Make Inoperative Exemptions; Retrofit On-Off Switches for Air Bags

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-08

    ..., 2000 (65 FR 19477-78). FOR FURTHER INFORMATION CONTACT: For non-legal issues: Ms. Carla Rush, Office of...\\ See preamble to agency final rule on advanced air bags, 65 FR 30680, 30682-83, May 12, 2000. To... published in the Federal Register (62 FR 62406) a final rule permitting motor vehicle dealers and...

  20. Linear Heave Dynamics of an Air-Cushion Vehicle Bag-and-Finger Skirt

    NASA Astrophysics Data System (ADS)

    Chung, Joon; Sullivan, Phillip A.

    Results from a linear analysis of the heave dynamics of an air-cushion vehicle equipped with a bag-and-finger skirt are described. A two-dimensional section of the cushion is subject to pure heave or long-wave surface motion inputs. The skirt mass is lumped in the fingers, with the bag being modelled as a combination of massless inelastic membranes and links. The airflows from bag to cushion and from cushion to atmosphere are assumed quasisteady, and the bag and cushion volumes are modelled as lumped pneumatic capacitances. For a configuration representative of a 37t vehicle, frequency response characteristics show the effect of skirt geometry and mass changes, and cushion capacitance. The results suggest that changes in skirt geometry cannot be used to radically modify an undesirable heave response, but reducing the skirt mass may be effective. The air compressibility also affects heave response at high frequencies, with the effect becoming more prominent at the low cushion-flow rates now used in practice.

  1. Theoretical investigation of heave dynamics of an air cushion vehicle bag and finger skirt

    NASA Astrophysics Data System (ADS)

    Chung, Joon

    This thesis describes a theoretical investigation of the nonlinear and linear heave dynamics of an air cushion vehicle (ACV) equipped with a bag and finger skirt system with the purpose of understanding the skirt's effect on the vehicle heave dynamics. Throughout the course of this work, the pure heave motion of a two dimensional section of the skirt is investigated using several mathematical models. Both the nonlinear and linearized analyses include a detailed model of the skirt geometry, which is modelled as a combination of inelastic membranes and links. Air flow processes from the bag to the cushion and from the cushion to the atmosphere are assumed to be quasisteady, and the bag and cushion volumes are modelled as lumped pneumatic capacitances. The modulation of the escaping cushion air by skirt-ground contact is also included. The nonlinear simulations reveal that characteristically nonlinear dynamical phenomena such as period doubling and chaos can be expected to occur during the normal operation of ACVs. Furthermore, a configuration representative of a 37 tonne vehicle shows a resonance at frequencies in the range for which humans are most sensitive. Although these results thus show that some aspects of the bag and finger skirt heave dynamics can be highly nonlinear, they indicate that under certain circumstances, standard linear techniques can yield useful insights. Results from the linear analysis suggest that changes in skirt geometry cannot be used to radically modify the undesirable heave response of the bag and finger skirt, but reducing the skirt mass is quite effective. The pneumatic capacitance of the bag and cushion volume proves to be an important factor in the heave response. In particular, it contributes to heave instability. The air compressibility also affects heave response at high frequencies, with the effect becoming more prominent as the flow rate is reduced. The importance of unsteady fan effects on ACV dynamics is investigated by the

  2. Modeling and Simulation of the Second-Generation Orion Crew Module Air Bag Landing System

    NASA Technical Reports Server (NTRS)

    Timmers, Richard B.; Hardy, Robin C.; Willey, Cliff E.; Welch, Joseph V.

    2009-01-01

    Air bags were evaluated as the landing attenuation system for earth landing of the Orion Crew Module (CM). Analysis conducted to date shows that airbags are capable of providing a graceful landing of the CM in nominal and off-nominal conditions such as parachute failure, high horizontal winds, and unfavorable vehicle/ground angle combinations, while meeting crew and vehicle safety requirements. The analyses and associated testing presented here surround a second generation of the airbag design developed by ILC Dover, building off of relevant first-generation design, analysis, and testing efforts. In order to fully evaluate the second generation air bag design and correlate the dynamic simulations, a series of drop tests were carried out at NASA Langley s Landing and Impact Research (LandIR) facility in Hampton, Virginia. The tests consisted of a full-scale set of air bags attached to a full-scale test article representing the Orion Crew Module. The techniques used to collect experimental data, develop the simulations, and make comparisons to experimental data are discussed.

  3. Critical care air transport team (CCATT) nurses' deployed experience.

    PubMed

    Brewer, Theresa L; Ryan-Wenger, Nancy A

    2009-05-01

    The objective of this study was to use descriptive and phenomenological methods with Critical Care Air Transport Team (CCATT) nurses to identify knowledge and skills required to provide care for critically ill patients in a combat environment. Unstructured interviews, focus groups, written narratives, group interviews, participant observation, and review of in-flight documentation of care were used to obtain data from 23 registered nurses who had deployed with CCATT missions. Dimensions that emerged from the data included: clinical and operational competence, personal, physical, and psychosocial readiness, soldier and survival skills, leadership, administrative concerns, group identification and integration, aircraft air and evacuation familiarity, and nurse characteristics. This information should be shared with CCATT trainers and unit personnel to better prepare them for the realities of future deployments. Future research could incorporate these data into a self-assessment scale to evaluate CCATT nurses' readiness for future deployments. PMID:20731282

  4. Influence of surfactant on the drop bag breakup in a continuous air jet stream

    NASA Astrophysics Data System (ADS)

    Zhao, Hui; Zhang, Wen-Bin; Xu, Jian-Liang; Li, Wei-Feng; Liu, Hai-Feng

    2016-05-01

    The deformation and breakup of surfactant-laden drops is a common phenomenon in nature and numerous practical applications. We investigate influence of surfactant on the drop bag breakup in a continuous air jet stream. The airflow would induce the advection diffusion of surfactant between interface and bulk of drop. Experiments indicate that the convective motions of deforming drop would induce the non-equilibrium distribution of surfactant, which leads to the change of surface tension. When the surfactant concentration is smaller than critical micelle concentration (CMC), with the increase of surface area of drop, the surface tension of liquid-air interface and the critical Weber number will increase. When the surfactant concentration is bigger than CMC, the micelle can be considered as the source term, which can supply the monomers. So in the presence of surfactant, there would be the significant nonlinear variation on the critical Weber number of bag breakup. We build the dynamic non-monotonic relationship between concentrations of surfactant and critical Weber number theoretically. In the range of parameters studied, the experimental results are consistent with the model estimates.

  5. Landing Characteristics of a Reentry Capsule with a Torus-Shaped Air Bag for Load Alleviation

    NASA Technical Reports Server (NTRS)

    McGehee, John R.; Hathaway, Melvin E.

    1960-01-01

    An experimental investigation has been made to determine the landing characteristics of a conical-shaped reentry capsule by using torus-shaped air bags for impact-load alleviation. An impact bag was attached below the large end of the capsule to absorb initial impact loads and a second bag was attached around the canister to absorb loads resulting from impact on the canister when the capsule overturned. A 1/6-scale dynamic model of the configuration was tested for nominal flight paths of 60 deg. and 90 deg. (vertical), a range of contact attitudes from -25 deg. to 30 deg., and a vertical contact velocity of 12.25 feet per second. Accelerations were measured along the X-axis (roll) and Z-axis (yaw) by accelerometers rigidly installed at the center of gravity of the model. Actual flight path, contact attitudes, and motions were determined from high-speed motion pictures. Landings were made on concrete and on water. The peak accelerations along the X-axis for landings on concrete were in the order of 3Og for a 0 deg. contact attitude. A horizontal velocity of 7 feet per second, corresponding to a flight path of 60 deg., had very little effect upon the peak accelerations obtained for landings on concrete. For contact attitudes of -25 deg. and 30 deg. the peak accelerations along the Z-axis were about +/- l5g, respectively. The peak accelerations measured for the water landings were about one-third lower than the peak accelerations measured for the landings on concrete. Assuming a rigid body, computations were made by using Newton's second law of motion and the force-stroke characteristics of the air bag to determine accelerations for a flight path of 90 deg. (vertical) and a contact attitude of 0 deg. The computed and experimental peak accelerations and strokes at peak acceleration were in good agreement for the model. The special scaling appears to be applicable for predicting full-scale time and stroke at peak acceleration for a landing on concrete from a 90 deg

  6. Deployment stressors and outcomes among Air Force chaplains.

    PubMed

    Levy, Hannah C; Conoscenti, Lauren M; Tillery, John F; Dickstein, Benjamin D; Litz, Brett T

    2011-06-01

    Military chaplains are invaluable caregiver resources for service members. Little is known about how chaplains respond to the challenge of providing spiritual counsel in a warzone. In this exploratory study, 183 previously deployed Air Force chaplains completed an online survey assessing operational and counseling stress exposure, posttraumatic stress disorder (PTSD) symptoms, compassion fatigue, and posttraumatic growth. Despite reporting exposure to stressful counseling experiences, Air Force chaplains did not endorse high compassion fatigue. Rather, chaplains experienced positive psychological growth following exposure to stressful counseling experiences. However, 7.7% of Air Force chaplains reported clinically significant PTSD symptoms, suggesting that they are not immune to deployment-related mental health problems. Simultaneous regression analyses revealed that counseling stress exposure predicted compassion fatigue (β = .20) and posttraumatic growth (β = .24), suggesting that caretaking in theatre is stressful enough to spur positive psychological growth in chaplains. Consistent with findings from previous studies, hierarchical regression analyses revealed that operational stress exposure predicted PTSD symptom severity (β = .33) while controlling for demographic variables. PMID:21567477

  7. Magnetic biomonitoring by moss bags for industry-derived air pollution in SW Finland

    NASA Astrophysics Data System (ADS)

    Salo, Hanna; Mäkinen, Joni

    2014-11-01

    We provide the first detailed case study using Sphagnum papillosum moss bags for active magnetic monitoring of airborne industrial pollution in order to evaluate the actual role of various emission sources and the competence of current environmental protection actions relative to the air quality. The origin and spatial spreading of particulate matter (PM) based on magnetic, chemical, and SEM-EDX analyses was studied around the Industrial Park in Harjavalta, SW Finland. The data was collected during two 6-month sampling periods along 8 km transects in 2010-2011. The results support our hypothesis that the main emission source of PM is not the Cu-Ni smelter's pipe as presumed in previous chemical monitorings. We argue that the hot spot area within the severe impact pollution zone is related to slag processing and/or other unidentified industrial activity. At short distances various dust-providing sources outweigh the fly-ash load from the Cu-Ni smelter's pipe. Active magnetic monitoring by moss bags will help in planning environmental actions as well as in improvement of health conditions for industrial staff and town residents living next to the Industrial Park.

  8. Using head-on collisions to compare risk of driver death by frontal air bag generation: a matched-pair cohort study.

    PubMed

    Braver, Elisa R; Kufera, Joseph A; Alexander, Melvin T; Scerbo, Marge; Volpini, Karen; Lloyd, Joseph P

    2008-03-01

    US air bag regulations were changed in 1997 to allow tests of unbelted male dummies in vehicles mounted and accelerated on sleds, resulting in longer crash pulses than rigid-barrier crashes. This change facilitated depowering of frontal air bags and was intended to reduce air bag-induced deaths. Controversy ensued as to whether sled-certified air bags could increase adult fatality risk. A matched-pair cohort study of two-vehicle, head-on, fatal collisions between drivers involving first-generation versus sled-certified air bags during 1998-2005 was conducted by using Fatality Analysis Reporting System data. Sled certification was ascertained from public information and a survey of automakers. Conditional Poisson regression for matched-pair cohorts was used to estimate risk ratios adjusted for age, seat belt status, vehicle type, passenger car size, and model year for driver deaths in vehicles with sled-certified air bags versus first-generation air bags. For all passenger-vehicle pairs, the adjusted risk ratio was 0.87 (95% confidence interval: 0.77, 0.98). In head-on collisions involving only passenger cars, the adjusted risk ratio was 1.04 (95% confidence interval: 0.85, 1.29). Increased fatality risk for drivers with sled-certified air bags was not observed. A borderline significant interaction between vehicle type and air bag generation suggested that sled-certified air bags may have reduced the risk of dying in head-on collisions among drivers of pickup trucks. PMID:18079131

  9. Bag breakup of low viscosity drops in the presence of a continuous air jet

    SciTech Connect

    Kulkarni, V. Sojka, P. E.

    2014-07-15

    This work examines the breakup of a single drop of various low viscosity fluids as it deforms in the presence of continuous horizontal air jet. Such a fragmentation typically occurs after the bulk liquid has disintegrated upon exiting the atomizer and is in the form of an ensemble of drops which undergo further breakup. The drop deformation and its eventual disintegration is important in evaluating the efficacy of a particular industrial process, be it combustion in automobile engines or pesticide spraying in agricultural applications. The interplay between competing influences of surface tension and aerodynamic disruptive forces is represented by the Weber number, We, and Ohnesorge number, Oh, and used to describe the breakup morphology. The breakup pattern considered in our study corresponds to that of a bag attached to a toroidal ring which occurs from ∼12 < We < ∼16. We aim to address several issues connected with this breakup process and their dependence on We and Oh which have been hitherto unexplored. The We boundary at which breakup begins is theoretically determined and the expression obtained, We=12(1+2/3Oh{sup 2}), is found to match well with experimental data ([L.-P. Hsiang and G. M. Faeth, Int. J. Multiphase Flow 21(4), 545–560 (1995)] and [R. S. Brodkey, “Formation of drops and bubbles,” in The Phenomena of Fluid Motions (Addison-Wesley, Reading, 1967)]). An exponential growth in the radial extent of the deformed drop and the streamline dimension of the bag is predicted by a theoretical model and confirmed by experimental findings. These quantities are observed to strongly depend on We. However, their dependence on Oh is weak.

  10. Morphological classification of low viscosity drop bag breakup in a continuous air jet stream

    NASA Astrophysics Data System (ADS)

    Zhao, Hui; Liu, Hai-Feng; Li, Wei-Feng; Xu, Jian-Liang

    2010-11-01

    To investigate the effect of Rayleigh-Taylor wave number in the region of maximum cross stream dimension (NRT) on drop breakup morphology, the breakup properties of accelerating low viscosity liquid drops (water and ethanol drops, diameter=1.2-6.6 mm, Weber number=10-80) were investigated using high-speed digital photography. The results of morphological analysis show a good correlation of the observed breakup type with NRT; bag breakup occurred when NRT was 1/√3 -1, bag-stamen breakup at 1-2, and dual-bag breakup at 2-3. The number of nodes in bag breakup, bag-stamen breakup, and dual-bag breakup all increased with Weber number. The experimental results are consistent with the model estimates and in good agreement with those reported in the literature.

  11. 76 FR 60118 - Tesla Motors, Inc. Grant of Petition for Renewal of a Temporary Exemption From the Advanced Air...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-28

    ... risks presented by air bag deployment. \\3\\ See 65 FR 30680 (May 12, 2000). The issuance of the advanced... advanced air bag system); Notice of Receipt of Petition of Lotus Cars Ltd., 76 FR 33406 (June 8, 2011... Manufacturers In general, frontal air bags for drivers and right front passengers have large net benefits....

  12. Air pollution monitoring using emission inventories combined with the moss bag approach.

    PubMed

    Iodice, P; Adamo, P; Capozzi, F; Di Palma, A; Senatore, A; Spagnuolo, V; Giordano, S

    2016-01-15

    Inventory of emission sources and biomonitoring with moss transplants are two different methods to evaluate air pollution. In this study, for the first time, both these approaches were simultaneously applied in five municipalities in Campania (southern Italy), deserving attention for health-oriented interventions as part of a National Interest Priority Site. The pollutants covered by the inventory were CO, NOx, particulate matter (PM10), volatile organic compounds (VOCs), and some heavy metals (As, Cd, Cr, Cu, Hg, Ni, Pb, Se, and Zn). The biomonitoring survey was based on the use of the devitalized moss Hypnum cupressiforme transplanted into bags, following a harmonized protocol. The exposure covered 40 agricultural and urban/residential sites, with half of them located in proximity to roads. The pollutants monitored were Al, As, Cd, Cr, Cu, Fe, Hg, Ni, Pb, Se, and Zn, as well as total polycyclic aromatic hydrocarbons (PAHs) only in five sites. Using the emission inventory approach, high emission loads were detected for all the major air pollutants and the following heavy metals: Cr, Cu, Ni, Pb and Zn, over the entire study area. Arsenic, Pb, and Zn were the elements most accumulated by moss. Total PAH postexposure contents were higher than the preexposure values (~20-50% of initial value). Moss uptakes did not differ substantially among municipalities or within exposure sites. In the five municipalities, a similar spatial pattern was evidenced for Pb by emission inventory and moss accumulation. Both approaches indicated the same most polluted municipality, suggesting their combined use as a valuable resource to reveal contaminants that are not routinely monitored. PMID:26479914

  13. Residential heating contribution to level of air pollutants (PAHs, major, trace, and rare earth elements): a moss bag case study.

    PubMed

    Vuković, Gordana; Aničić Urošević, Mira; Pergal, Miodrag; Janković, Milan; Goryainova, Zoya; Tomašević, Milica; Popović, Aleksandar

    2015-12-01

    In areas with moderate to continental climates, emissions from residential heating system lead to the winter air pollution peaks. The EU legislation requires only the monitoring of airborne concentrations of particulate matter, As, Cd, Hg, Ni, and B[a]P. Transition metals and rare earth elements (REEs) have also arisen questions about their detrimental health effects. In that sense, this study examined the level of extensive set of air pollutants: 16 polycyclic aromatic hydrocarbons (PAHs), and 41 major elements, trace elements, and REEs using Sphagnum girgensohnii moss bag technique. During the winter of 2013/2014, the moss bags were exposed across Belgrade (Serbia) to study the influence of residential heating system to the overall air quality. The study was set as an extension to our previous survey during the summer, i.e., non-heating season. Markedly higher concentrations of all PAHs, Sb, Cu, V, Ni, and Zn were observed in the exposed moss in comparison to the initial values. The patterns of the moss REE concentrations normalized to North American Shale Composite and Post-Archean Australian Shales were identical across the study area but enhanced by anthropogenic activities. The results clearly demonstrate the seasonal variations in the moss enrichment of the air pollutants. Moreover, the results point out a need for monitoring of air quality during the whole year, and also of various pollutants, not only those regulated by the EU Directive. PMID:26213134

  14. Evaluation of passive diffusion bag samplers, dialysis samplers, and nylon-screen samplers in selected wells at Andersen Air Force Base, Guam, March-April 2002

    USGS Publications Warehouse

    Vroblesky, Don A.; Joshi, Manish; Morrell, Jeff; Peterson, J.E.

    2003-01-01

    During March-April 2002, the U.S. Geological Survey, Earth Tech, and EA Engineering, Science, and Technology, Inc., in cooperation with the Air Force Center for Environmental Excellence, tested diffusion samplers at Andersen Air Force Base, Guam. Samplers were deployed in three wells at the Main Base and two wells at Marianas Bonins (MARBO) Annex as potential ground-water monitoring alternatives. Prior to sampler deployment, the wells were tested using a borehole flowmeter to characterize vertical flow within each well. Three types of diffusion samplers were tested: passive diffusion bag (PDB) samplers, dialysis samplers, and nylon-screen samplers. The primary volatile organic compounds (VOCs) tested in ground water at Andersen Air Force Base were trichloroethene and tetrachloroethene. In most comparisons, trichloroethene and tetrachloroethene concentrations in PDB samples closely matched concentrations in pumped samples. Exceptions were in wells where the pumping or ambient flow produced vertical translocation of water in a chemically stratified aquifer. In these wells, PDB samplers probably would be a viable alternative sampling method if they were placed at appropriate depths. In the remaining three test wells, the trichloroethene or tetrachloroethene concentrations obtained with the diffusion samplers closely matched the result from pumped sampling. Chloride concentrations in nylon-screen samplers were compared with chloride concentrations in dialysis and pumped samples to test inorganic-solute diffusion into the samplers across a range of concentrations. The test showed that the results from nylon-screen samplers might have underestimated chloride concentrations at depths with elevated chloride concentrations. The reason for the discrepancy in this investigation is unknown, but may be related to nylon-screen-mesh size, which was smaller than that used in previous investigations.

  15. FIELD-DEPLOYABLE MONITORS FOR VOLATILE ORGANIC COMPOUNDS IN AIR

    EPA Science Inventory

    Volatile organic compounds in ambient air are usually estimated by trapping them from air or collecting whole air samples and returning them to a laboratory for analysis by gas chromatography using selective detection. ata do not appear for several days, during which sample integ...

  16. FIELD DEPLOYABLE MONITORS FOR VOLATILE COMPOUNDS IN AIR

    EPA Science Inventory

    Volatile organic compounds in ambient air are usually estimated by trapping them from air or collecting whole air samples and returning them to a laboratory for analysis by gas chromatography using selective detection. ata do not appear for several days, during which sample integ...

  17. Sampling of trace volatile metal(loid) compounds in ambient air using polymer bags: a convenient method.

    PubMed

    Haas, K; Feldmann, J

    2000-09-01

    The sampling of volatile metal(loid) compounds (VOMs) such as hydrides, methylated, and permethylated species of arsenic, antimony, and tin is described using Tedlar bags. Advantages as well as limitations and constraints are discussed and compared to other widely used sampling techniques within this area, namely, stainless steel canisters, cryotrapping, and solid adsorbent cartridges. To prove the suitability of Tedlar bags for the sampling of volatile metal(loid) compounds, series of stability tests have been run using both laboratory synthetic and real samples analyzed periodically after increasing periods of storage. The samples have been stored in the dark at 20 degrees C and at 50 degrees C. Various volatile arsenic species (AsH3, MeAsH2, Me2AsH, Me3As), tin species (SnH4, MeSnH3, Me2SnH2, Me3SnH, Me4Sn, BuSnH3), and antimony species (SbH3, MeSbH2, Me2SbH, Me3Sb) have been generated using hydride generation methodology and mixed with moisturized air. Three static gaseous atmospheres with concentrations of 0.3-18 ng/L for the various compounds have been generated in Tedlar bags, and the stability of the VOMs has been monitored over a period of 5 weeks. Sewage sludge digester gas samples have been stored only at 20 degrees C for a period of 48 h. Cryotrapping GC/ICPMS has been used for the determination of the VOMs with a relative standard deviation of 5% for 100 pg. After 8 h, the recovery rate of all the compounds in the air atmospheres was better than 95% at 20 and 50 degrees C, whereas the recovery after 24 h was found to be between 81 and 99% for all VOMs at 20 and 50 degrees C except for Me3Sb and Me3As. These species show a loss between 48 and 73% at both temperatures. After 5 weeks at 20 degrees C, a loss of only 25-50% for arsine and stibine and the above-mentioned tin compounds was determined. Only Me3Sb, Me3Bi, and Me2Te were present in the digester gas sample. After 24 h, losses of 44, 10, and 12%, respectively, could be determined. Given these

  18. It's in the Bag!

    ERIC Educational Resources Information Center

    Renfro, Nancy

    1983-01-01

    Thirteen ideas for using paper bags for class art activities are given. Directions for making bag barracudas, bionic bags, bigfoot bags, bag sculptures, bag beads, and body bag superstars are included. (PP)

  19. Explorative and innovative dynamic flux bag method development and testing for mercury air-vegetation gas exchange fluxes

    NASA Astrophysics Data System (ADS)

    Zhang, Hong H.; Poissant, Laurier; Xu, Xiaohong; Pilote, Martin

    An intensive field study quantifying total gaseous mercury (TGM) and mercury speciation fluxes in a wetland ecosystem (Bay St. François wetlands, Québec, Canada) was conducted in summer 2003. This study is one of the first attempts to design and develop an innovative approach—dynamic flux bag (DFB) technique to measure in situ mercury air-vegetation exchange with a monoculture of river bulrush (S cirpus fluviatilis). Air-vegetation flux measurements were conducted under dry condition at site 1 and flood condition at site 2. TGM fluxes fluctuated from -0.91 to 0.64 ng/m 2 (leaf area)/h with an average value of -0.26±0.28 ng/m 2 (leaf area)/h at site 1 and ranged from -0.98 to 0.08 ng/m 2 (leaf area)/h with a mean flux of -0.33±0.24 ng/m 2 (leaf area)/h at site 2 (positive sign means volatilization, and negative sign indicates deposition). The data indicated that TGM air-vegetation exchange is bidirectional. However, the net flux is primarily featured by dry deposition of TGM from atmosphere to the vegetation. In mercury speciation study using the DFB approach, particulate mercury (PM) and reactive gaseous mercury (RGM) represented less than 1% of total mercury. Ambient ozone concentrations had significant influences on RGM concentrations ( r=0.54, p<0.05), implicating oxidation of gaseous elemental mercury (GEM) by ozone to form RGM. A discussion about the similarities and discrepancies between the DFB and other approaches (dynamic flux chamber and modified Bowen ratio) is presented. During the course of this study, some operational effects associated with the bag design, mainly the emergence of condensation within the bag, were encountered. Several improvements relating to the DFB design were recommended. Upon improvement, the DFB method could be one of the most promising techniques to study the role of a single plant in air-vegetation exchange of mercury.

  20. Tight bag

    PubMed Central

    Parthasarathy, S; Ravishankar, M

    2010-01-01

    Tight bag is a clinical situation where excessive pressure needs to be applied to a reservoir bag of a breathing system to an intubated patient, which may or may not produce satisfactory ventilation. The various clinical scenarios and the appropriate steps for its prevention are described. PMID:20885863

  1. Air Deployable Underwater Glider and Buoy Development for Arctic and Oceanographic Sensing

    NASA Astrophysics Data System (ADS)

    Legnos, P. J.

    2013-12-01

    LBI developed under a NOAA SBIR the AXIB (Airborne eXpendable Ice Buoy). The initial buoy was developed to collect barometric pressure, air temperature two meters above the surface and sea surface or ice temperature. A number of these AXIBs have been successfully deployed in the Arctic and Antarctic. Currently we are in the process of integrating additional sensors to include an anemometer, thermistor chain and hydrophones. Further development is in process for the integration of solar and wind recharging systems and lower power sensors and processing LBI developed under an ONR SBIR Grant two Air Deployable Underwater Gliders. They are primarily designed for air deployment from Navy P-3 or P-8 Aircraft though easily deployed from other aircraft or helicopters. The A-size (4 7/8'dia. X 36' long) and the 12 ¾ (12 ¾' dia. X 9' 9' long). On the development side we are in the process of integrating sensors and enhancing the battery storage capacity. We anticipate a broad range of Oceanographic sensing missions for these Gliders.

  2. Parachute/flotation bag recovery system for a large RV nose cone

    SciTech Connect

    Pepper, W.M.

    1980-03-01

    This report describes the design and development of a single-stage recovery system consisting of a 6-ft dia guide surface parachute with a 3.5 ft/sup 3/ ram-air-filled flotation bag for ocean recovery of a 120-lb nose cone. Recovery procedures start with jettisoning a portion of the initial reentry mass before deploying the parachute.

  3. Photodegradation of polyaromatic hydrocarbons in passive air samplers: Field testing different deployment chambers

    USGS Publications Warehouse

    Bartkow, M.E.; Kennedy, K.E.; Huckins, J.N.; Holling, N.; Komarova, T.; Muller, J.F.

    2006-01-01

    Semi-permeable membrane devices (SPMDs) were loaded with deuterated anthracene and pyrene as performance reference compounds (PRCs) and deployed at a test site in four different chambers (open and closed box chamber, bowl chamber and cage chamber) for 29 days. The losses of PRCs and the uptake of polyaromatic hydrocarbons (PAHs) from the ambient air were quantified. UV-B levels measured in each deployment chamber indicated that SPMDs would be exposed to the most UV-B in the cage chamber and open box chamber. Significantly less PAHs were quantified in SPMDs deployed in the cage chamber and open box chamber compared to samplers from the other two chambers, suggesting that photodegradation of PAHs had occurred. The loss of PRCs confirmed these results but also showed that photodegradation was occurring in the closed box chamber. The bowl chamber appears to provide the best protection from the influence of direct photodegradation. ?? 2006 Elsevier Ltd. All rights reserved.

  4. Biodynamic simulations of the effect of a neck-mounted air bag on the head/neck response during high G acceleration.

    PubMed

    Lee, C M; Freivalds, A; Lee, S Y

    1991-08-01

    New helmet-mounted devices (such as night-vision goggles, laser eye protection, etc.) have created new safety hazards for pilots during ejection or high G maneuvering. In order to prevent the resulting head/neck injuries, this study extends the air-bag protection system developed for ground vehicles to a neck mounted system for aircrew personnel. Results, carried out by computer biodynamic simulations using the Articulated Total Body Model (ATB), showed that: 1) helmet weight had little effect on head/neck torque, contact force and flexion angle; 2) initial head/neck position and center of gravity offsets of the helmet-mounted devices had significant effects on head-neck torques, contact forces, and neck flexion angles; and 3) the neck mounted air bag significantly reduced neck torques, contact forces, and neck flexion angles. We conclude that the neck-mounted air bag system could significantly reduce the severity of head/neck injuries to pilots during ejection or high G maneuvering. PMID:1930056

  5. Spouse abuse among United States Air Force personnel who deployed in support of Operation Iraqi Freedom/Operation Enduring Freedom.

    PubMed

    Rabenhorst, Mandy M; McCarthy, Randy J; Thomsen, Cynthia J; Milner, Joel S; Travis, Wendy J; Foster, Rachel E; Copeland, Carol W

    2013-10-01

    The authors examined spouse abuse perpetration among all married U.S. Air Force personnel who deployed in support of Operation Iraqi Freedom/Operation Enduring Freedom. Using Poisson and conditional Poisson regression, they compared rates of spouse abuse perpetration predeployment and postdeployment in the population of married U.S. Air Force personnel who had a combat-related deployment between October 1, 2001 and October 31, 2008 (N = 156,296). Just over 2% (n = 3,524) of deployers perpetrated at least one substantiated incident of spouse physical or emotional abuse within the 308,197,653 days at risk for abuse during the study period. Male deployers perpetrated spouse abuse at approximately twice the rate of female deployers. Regarding changes in rates of spouse abuse perpetration postdeployment versus predeployment among all deployers, the authors found no differences overall; however, several deployer and incident-related characteristics moderated this effect. Rates of emotional abuse, mild abuse, and abuse not involving alcohol were significantly lower postdeployment, whereas rates of moderate/severe abuse and abuse involving alcohol were significantly higher postdeployment. Although the majority of U.S. Air Force deployers did not perpetrate any substantiated incidents of spouse abuse, there was variability in the impact of deployment on spouse abuse rates before versus after deployment. The finding that rates of moderate/severe spouse abuse incidents involving alcohol were higher postdeployment suggests a need for focused prevention/intervention efforts. PMID:24015706

  6. Launching Garbage-Bag Balloons.

    ERIC Educational Resources Information Center

    Kim, Hy

    1997-01-01

    Presents a modification of a procedure for making and launching hot air balloons made out of garbage bags. Student instructions for balloon construction, launching instructions, and scale diagrams are included. (DDR)

  7. Arduino-based control system for measuring ammonia in air using conditionally-deployed diffusive samplers

    NASA Astrophysics Data System (ADS)

    Ham, J. M.; Williams, C.; Shonkwiler, K. B.

    2012-12-01

    Arduino microcontrollers, wireless modules, and other low-cost hardware were used to develop a new type of air sampler for monitoring ammonia at strong areal sources like dairies, cattle feedlots, and waste treatment facilities. Ammonia was sampled at multiple locations on the periphery of an operation using Radiello diffusive passive samplers (Cod. RAD168- and RAD1201-Sigma-Aldrich). However, the samplers were not continuously exposed to the air. Instead, each sampling station included two diffusive samplers housed in specialized tubes that sealed the cartridges from the atmosphere. If a user-defined set of wind and weather conditions were met, the Radiellos were deployed into the air using a micro linear actuator. Each station was solar-powered and controlled by Arduinos that were linked to a central weather station using Xbee wireless modules (Digi International Inc.). The Arduinos also measured the total time of exposure using hall-effect sensors to verify the position of the cartridge (i.e., deployed or retracted). The decision to expose or retract the samplers was made every five minutes based on wind direction, wind speed, and time of day. Typically, the diffusive samplers were replaced with fresh cartridges every two weeks and the used samplers were analyzed in the laboratory using ion chromatography. Initial studies were conducted at a commercial dairy in northern Colorado. Ammonia emissions along the Front Range of Colorado can be transported into the mountains where atmospheric deposition of nitrogen can impact alpine ecosystems. Therefore, low-cost air quality monitoring equipment is needed that can be widely deployed in the region. Initial work at the dairy showed that ammonia concentrations ranged between 600 to 1200 ppb during the summer; the highest concentrations were downwind of a large anaerobic lagoon. Time-averaged ammonia concentrations were also used to approximate emissions using inverse dispersion models. This methodology provides a

  8. Combat casualty care in an air force theater hospital: perspectives of recently deployed cardiothoracic surgeons.

    PubMed

    McNeil, Jeffrey D; Pratt, Jerry W

    2008-01-01

    Current military operations have generated a large number of casualties and have led to the establishment of the first Air Force Theater Hospital since Vietnam. Located at Balad Airbase, Iraq, this hospital is a busy trauma center. Thoracic injuries are relatively infrequent but highly lethal. The cardiothoracic surgeon is uniquely trained to provide sophisticated surgical management to some of the most severely injured patients. The operative experiences of four recently deployed cardiothoracic surgeons are described. Mortality from combat injury in this conflict is lower than in prior wars. Body armor may prevent some fatal injuries. Several features of military medical care process are helping to improve our outcomes-specifically, the development of a trauma care system modeled on successful civilian centers, the expanded use of damage control concepts, and utilization of early transportation out of the theater of operations using Critical Care Air Transport Teams (CCATT). PMID:18420132

  9. Sea spray production by bag breakup mode of fragmentation of the air-water interface at strong and hurricane wind

    NASA Astrophysics Data System (ADS)

    Troitskaya, Yuliya; Kandaurov, Alexander; Ermakova, Olga; Kozlov, Dmitry; Sergeev, Daniil; Zilitinkevich, Sergej

    2016-04-01

    Sea sprays is a typical element of the marine atmospheric boundary layer (MABL) of large importance for marine meteorology, atmospheric chemistry and climate studies. They are considered as a crucial factor in the development of hurricanes and severe extratropical storms, since they can significantly enhance exchange of mass, heat and momentum between the ocean and the atmosphere. This exchange is directly provided by spume droplets with the sizes from 10 microns to a few millimeters mechanically torn off the crests of a breaking waves and fall down to the ocean due to gravity. The fluxes associated with the spray are determined by the rate of droplet production at the surface quantified by the sea spray generation function (SSGF), defined as the number of spray particles of radius r produced from the unit area of water surface in unit time. However, the mechanism of spume droplets' formation is unknown and empirical estimates of SSGF varied over six orders of magnitude; therefore, the production rate of large sea spray droplets is not adequately described and there are significant uncertainties in estimations of exchange processes in hurricanes. Experimental core of our work comprise laboratory experiments employing high-speed video-filming, which have made it possible to disclose how water surface looks like at extremely strong winds and how exactly droplets are torn off wave crests. We classified events responsible for spume droplet, including bursting of submerged bubbles, generation and breakup of "projections" or liquid filaments (Koa, 1981) and "bag breakup", namely, inflating and consequent blowing of short-lived, sail-like pieces of the water-surface film, "bags". The process is similar to "bag-breakup" mode of fragmentation of liquid droplets and jets in gaseous flows. Basing on statistical analysis of results of these experiments we show that the main mechanism of spray-generation is attributed to "bag-breakup mechanism On the base of general principles

  10. SMA actuated vertical deploy air dam: part 2 operation and test performance of prototype unit

    NASA Astrophysics Data System (ADS)

    Browne, Alan L.; Johnson, Nancy L.; Brown, Jeffrey

    2013-03-01

    Airflow over/under/around a vehicle can affect many important aspects of vehicle performance including vehicle drag (fuel economy) and cooling/heat exchange for the vehicle powertrain and A/C systems. Devices in current use to control airflow, with the exception of a few active spoilers, are of fixed geometry, orientation, and stiffness. Such devices can thus not be relocated, reoriented, etc. as driving conditions change and thus vehicle airflow cannot be adjusted to better suit the changed driving condition. Additionally, under-vehicle airflow control devices also reduce ground clearance presenting a challenge to designers to provide the needed control of airflow while maintaining sufficient ground clearance. The collaborative study, whose second part is documented in this paper, was successful in developing an SMA actuator based approach to reversibly deploying an air dam through vertical translation of its structure. Beyond feasibility, vehicle mounted prototype fully functional units demonstrated that this approach would add little weight to the existing stationary system, and could potentially perform well in the harsh under vehicle environment due to a lack of exposed bearings and pivots. This demonstration showed that actuation speed, force, and cyclic stability all could meet the application requirements. The solution, a dual point balanced actuation approach based on shape memory alloy wires, uses straight linear actuation to produce a reversible height change of 50 mm. On vehicle wind tunnel and onroad tests verified the potential for a reversibly deployable air dam to meet the otherwise conflicting goals of large ground clearance for off-road performance and optimum lower ground clearance for optimum fuel economy benefits.

  11. Delta XTE Spacecraft Solar Panel Deployment, Hangar AO at Cape Canaveral Air Station

    NASA Technical Reports Server (NTRS)

    1995-01-01

    The footage shows technicians in the clean room checking and adjusting the deployment mechanism of the solar panel for XTE spacecraft. Other scenes show several technicians making adjustments to software for deployment of the solar panels.

  12. The deployment of carbon monoxide wireless sensor network (CO-WSN) for ambient air monitoring.

    PubMed

    Chaiwatpongsakorn, Chaichana; Lu, Mingming; Keener, Tim C; Khang, Soon-Jai

    2014-06-01

    Wireless sensor networks are becoming increasingly important as an alternative solution for environment monitoring because they can reduce cost and complexity. Also, they can improve reliability and data availability in places where traditional monitoring methods are difficult to site. In this study, a carbon monoxide wireless sensor network (CO-WSN) was developed to measure carbon monoxide concentrations at a major traffic intersection near the University of Cincinnati main campus. The system has been deployed over two weeks during Fall 2010, and Summer 2011-2012, traffic data was also recorded by using a manual traffic counter and a video camcorder to characterize vehicles at the intersection 24 h, particularly, during the morning and evening peak hour periods. According to the field test results, the 1 hr-average CO concentrations were found to range from 0.1-1.0 ppm which is lower than the National Ambient Air Quality Standards (NAAQS) 35 ppm on a one-hour averaging period. During rush hour periods, the traffic volume at the intersection varied from 2,067 to 3,076 vehicles per hour with 97% being passenger vehicles. Furthermore, the traffic volume based on a 1-h average showed good correlation (R2 = 0.87) with the 1-h average CO-WSN concentrations for morning and evening peak time periods whereas CO-WSN results provided a moderate correlation (R2 = 0.42) with 24 hours traffic volume due to fluctuated changes of meteorological conditions. It is concluded that the performance and the reliability of wireless ambient air monitoring networks can be used as an alternative method for real time air monitoring. PMID:24937527

  13. The Deployment of Carbon Monoxide Wireless Sensor Network (CO-WSN) for Ambient Air Monitoring

    PubMed Central

    Chaiwatpongsakorn, Chaichana; Lu, Mingming; Keener, Tim C.; Khang, Soon-Jai

    2014-01-01

    Wireless sensor networks are becoming increasingly important as an alternative solution for environment monitoring because they can reduce cost and complexity. Also, they can improve reliability and data availability in places where traditional monitoring methods are difficult to site. In this study, a carbon monoxide wireless sensor network (CO-WSN) was developed to measure carbon monoxide concentrations at a major traffic intersection near the University of Cincinnati main campus. The system has been deployed over two weeks during Fall 2010, and Summer 2011–2012, traffic data was also recorded by using a manual traffic counter and a video camcorder to characterize vehicles at the intersection 24 h, particularly, during the morning and evening peak hour periods. According to the field test results, the 1 hr-average CO concentrations were found to range from 0.1–1.0 ppm which is lower than the National Ambient Air Quality Standards (NAAQS) 35 ppm on a one-hour averaging period. During rush hour periods, the traffic volume at the intersection varied from 2,067 to 3,076 vehicles per hour with 97% being passenger vehicles. Furthermore, the traffic volume based on a 1-h average showed good correlation (R2 = 0.87) with the 1-h average CO-WSN concentrations for morning and evening peak time periods whereas CO-WSN results provided a moderate correlation (R2 = 0.42) with 24 hours traffic volume due to fluctuated changes of meteorological conditions. It is concluded that the performance and the reliability of wireless ambient air monitoring networks can be used as an alternative method for real time air monitoring. PMID:24937527

  14. Child maltreatment among U.S. Air Force parents deployed in support of Operation Iraqi Freedom/Operation Enduring Freedom.

    PubMed

    Rabenhorst, Mandy M; McCarthy, Randy J; Thomsen, Cynthia J; Milner, Joel S; Travis, Wendy J; Colasanti, Marie P

    2015-02-01

    This study examined child maltreatment perpetration among 99,697 active-duty U.S. Air Force parents who completed a combat deployment. Using the deploying parent as the unit of analysis, we analyzed whether child maltreatment rates increased postdeployement relative to predeployment. These analyses extend previous research that used aggregate data and extend our previous work that used data from the same period but used the victim as the unit of analysis and included only deploying parents who engaged in child maltreatment. In this study, 2% (n = 1,746) of deploying parents perpetrated child maltreatment during the study period. Although no overall differences were found in child maltreatment rates postdeployment compared to predeployment, several maltreatment-related characteristics qualified this finding. Rates for emotional abuse and mild maltreatment were lower following deployment, whereas child maltreatment rates for severe maltreatment were higher following deployment. The finding that rates of severe child maltreatment, including incidents involving alcohol use, were higher postdeployment suggests a need for additional support services for parents following their return from combat deployment, with a focus on returning parents who have an alcohol use problem. PMID:25424846

  15. Experience Of A US Air Force Surgical And Critical Care Team Deployed In Support Of Special Operations Command Africa.

    PubMed

    Delmonaco, Brian L; Baker, Aaron; Clay, Jared; Kilbourn, James

    2016-01-01

    An eight-person team of conventional US Air Force (USAF) medical providers deployed to support US Special Operations Forces (SOF) in North and West Africa for the first time in November 2014. The predeployment training, operations while deployed, and lessons learned from the challenges of performing surgery and medical evacuations in the remote desert environment of Chad and Niger on the continent of Africa are described. The vast area of operations and far-forward posture of these teams requires cooperation between partner African nations, the French military, and SOF to make these medical teams effective providers of surgical and critical care in Africa. The continuous deployment of conventional USAF medical providers since 2014 in support of US Special Operations Command Africa is challenging and will benefit from more medical teams and effective air assets to provide casualty evacuation across the vast area of operations. PMID:27045506

  16. Use of depuration compounds in passive air samplers: results from active sampling-supported field deployment, potential uses, and recommendations.

    PubMed

    Moeckel, Claudia; Harner, Tom; Nizzetto, Luca; Strandberg, Bo; Lindroth, Anders; Jones, Kevin C

    2009-05-01

    Depuration compounds (DCs) are added to passive air samplers (PAS) prior to deployment to account for the wind-dependency of the sampling rate for gas-phase compounds. This correction is particularly useful for providing comparable data for samplers that are deployed in different environments and subject to different meteorological conditions such as wind speeds. Two types of PAS--the polyurethane foam (PUF) disk sampler and semipermeable membrane devices (SPMDs)--were deployed at eight heights on a 100 m tower to test whether the DC approach could yield air concentrations profiles for PCBs and organochlorine pesticides and account for the wind speed gradient with height. Average wind speeds ranged from 0.3 to 4.5 m s(-1) over the 40 day deployment, increasing with height Two low volume active air samples (AAS), one collected at 25 m and one at 73 m over the 40 day deployment showed no significant concentration differences for target compounds. As expected, the target compounds taken up by PAS reflected the wind profile with height This wind-dependency of the PAS was also reflected in the results of the DCs. A correction based on the DC approach successfully accounted for the effect of wind on PAS sampling rates, yielding a profile consistent with the AAS. Interestingly, in terms of absolute air concentrations, there were differences between the AAS and PAS-derived values for some target compounds. These were attributed to different sampling characteristics of the two approaches that may have resulted in slightly different air masses being sampled. Based on the results of this study, guidelines are presented for the use of DCs and for the calibration of PAS using AAS. PMID:19534139

  17. Citywide Impacts of Cool Roof and Rooftop Solar Photovoltaic Deployment on Near-Surface Air Temperature and Cooling Energy Demand

    NASA Astrophysics Data System (ADS)

    Salamanca, F.; Georgescu, M.; Mahalov, A.; Moustaoui, M.; Martilli, A.

    2016-04-01

    Assessment of mitigation strategies that combat global warming, urban heat islands (UHIs), and urban energy demand can be crucial for urban planners and energy providers, especially for hot, semi-arid urban environments where summertime cooling demands are excessive. Within this context, summertime regional impacts of cool roof and rooftop solar photovoltaic deployment on near-surface air temperature and cooling energy demand are examined for the two major USA cities of Arizona: Phoenix and Tucson. A detailed physics-based parametrization of solar photovoltaic panels is developed and implemented in a multilayer building energy model that is fully coupled to the Weather Research and Forecasting mesoscale numerical model. We conduct a suite of sensitivity experiments (with different coverage rates of cool roof and rooftop solar photovoltaic deployment) for a 10-day clear-sky extreme heat period over the Phoenix and Tucson metropolitan areas at high spatial resolution (1-km horizontal grid spacing). Results show that deployment of cool roofs and rooftop solar photovoltaic panels reduce near-surface air temperature across the diurnal cycle and decrease daily citywide cooling energy demand. During the day, cool roofs are more effective at cooling than rooftop solar photovoltaic systems, but during the night, solar panels are more efficient at reducing the UHI effect. For the maximum coverage rate deployment, cool roofs reduced daily citywide cooling energy demand by 13-14 %, while rooftop solar photovoltaic panels by 8-11 % (without considering the additional savings derived from their electricity production). The results presented here demonstrate that deployment of both roofing technologies have multiple benefits for the urban environment, while solar photovoltaic panels add additional value because they reduce the dependence on fossil fuel consumption for electricity generation.

  18. Operational dead air space testing of the chemically protected DEPloyable MEDical Systems (cp DEPMEDS). Final report, Aug-Oct 91

    SciTech Connect

    Seitzinger, A.; Richardson, T.

    1992-07-01

    This report documents the results and findings of dead air space tests on the chemically protected deployable medical systems (DEPMEDS) conducted at Fort Indiantown Gap, PA. The DEPMEDS are composed of various size overpressurized chemically protected shelters connected by viaducts. Designed by the U.S. Army Natick Research, Development and Engineering Center (NATICK), the shelters provide a clean air conditioned atmosphere to treat wounded personnel in a chemical warfare environment. NATICK requested the U.S. Army Chemical Research, Development and Engineering Center's support to identify any dead air spaces, because these spaces would be a potential chemical agent vapor accumulation location, and threaten the collective protection of the shelters. Initially, a smoke generator was utilized to observe the air flow patterns within the DEPMEDS, and suspect dead air space locations were identified. However, subsequent dissemination of sulfur hexafluoride into the ventilation system of the shelter indicated that no dead air spaces were present. This report includes a few suggestions to improve the air circulation of the DEPMEDS, namely elimination of the interior shelter liners and using doors between the viaducts connecting the various shelters. Sulfur, Ventilation kinetics, Shelters, Collective protection, Hexafluoride, Chemical agent simulants.

  19. Lunar regolith bagging system

    NASA Technical Reports Server (NTRS)

    Cannon, Reuben; Henninger, Scott; Levandoski, Mark; Perkins, Jim; Pitchon, Jack; Swats, Robin; Wessels, Roger

    1990-01-01

    A design of a lunar regolith bag and bagging system is described. The bags of regolith are to be used for construction applications on the lunar surface. The machine is designed to be used in conjunction with the lunar SKITTER currently under development. The bags for this system are 1 cu ft volume and are made from a fiberglass composite weave. The machinery is constructed mostly from a boron/aluminum composite. The machine can fill 120 bags per hour and work for 8 hours a day. The man hours to machine hours ratio to operate the machine is .5/8.

  20. DEVELOPMENT AND DEPLOYMENT OF AN INSTRUMENTATION SUITE FOR COMPREHENSIVE AIR QUALITY CHARACTERIZATION INCLUDING AEROSOL ROS

    EPA Science Inventory

    For different locations and seasons, this project will generate a unique high quality data set with new components that will extensively characterize the ambient air pollutant mix in different urban environments. The data will inform air quality modeling and health studies by ...

  1. Bag molding processes

    NASA Astrophysics Data System (ADS)

    Slobodzinsky, A.

    Features, materials, and techniques of vacuum, pressure, and autoclave FRP bag molding processes are described. The bags are used in sealed environments, inflated to flexibly force a curing FRP laminate to conform to a stiff mold form which defines the shape of the finished product. Densification is achieved as the bag presses out the voids and excess resin from the laminate, and consolidation occurs as the plies and adherends are bonded by the bag pressure. Curing techniques nominally involved room temperature or high temperature, and investigations of alternative techniques, such as induction, dielectric, microwave, xenon flash, UV, electron beam, and gamma radiation heating are proceeding. Polysulfone is the most common thermoplastic. Details are given of mold preparations, peel plies or release films and fabrics, bagging techniques, and reusable venting blankets and silicone rubber bags.

  2. A reversibly deployable air dam: a bending approach based on embedded shape memory alloy actuators, Part II: technology demonstration

    NASA Astrophysics Data System (ADS)

    McKnight, Geoffrey P.; Browne, Alan L.; Johnson, Nancy L.

    2009-03-01

    Airflow over/under/around a vehicle can affect many important aspects of vehicle performance including vehicle drag (and through this vehicle fuel economy), vehicle lift and downforce (and through these vehicle stability and handling), and cooling/heat exchange for the vehicle powertrain and air conditioning systems. Known devices in current use to control airflow over/under/around the vehicle are all of fixed geometry, location, orientation, and stiffness. Such devices can thus not be relocated, reoriented, reshaped, etc. as driving conditions change and thus airflow over/under/around the vehicle body cannot be adjusted to better suit the changed driving condition. Additionally, under-vehicle airflow control devices, such as air dams, also reduce ground clearance and thus present a constant challenge to designers to provide the needed control of airflow while maintaining sufficient ground clearance to avoid damage. The research project whose second phase is described herein had its genesis in brainstorming on ways in which the field activated shape and stiffness changing attributes of several classes of active materials could be utilized to produce on-demand deploying/stowing of an air dam. During this second phase, bench top working models were developed, constructed, and successfully exercised this demonstrating the feasibility of an SMA actuator based approach to reversibly deploying an air dam through bending of its flexible structure. Beyond feasibility, the bench top working models demonstrated an active materials based approach which would add little weight to the existing stationary system, and could potentially perform well in the harsh under vehicle environment due to a lack of bearings and pivots. This demonstration showed that actuation speed, force, and cyclic stability all could meet the application requirements.

  3. Antenna Deployment for the Localization of Partial Discharges in Open-Air Substations.

    PubMed

    Robles, Guillermo; Fresno, José Manuel; Sánchez-Fernández, Matilde; Martínez-Tarifa, Juan Manuel

    2016-01-01

    Partial discharges are ionization processes inside or on the surface of dielectrics that can unveil insulation problems in electrical equipment. The charge accumulated is released under certain environmental and voltage conditions attacking the insulation both physically and chemically. The final consequence of a continuous occurrence of these events is the breakdown of the dielectric. The electron avalanche provokes a derivative of the electric field with respect to time, creating an electromagnetic impulse that can be detected with antennas. The localization of the source helps in the identification of the piece of equipment that has to be decommissioned. This can be done by deploying antennas and calculating the time difference of arrival (TDOA) of the electromagnetic pulses. However, small errors in this parameter can lead to great displacements of the calculated position of the source. Usually, four antennas are used to find the source but the array geometry has to be correctly deployed to have minimal errors in the localization. This paper demonstrates, by an analysis based on simulation and also experimentally, that the most common layouts are not always the best options and proposes a simple antenna layout to reduce the systematic error in the TDOA calculation due to the positions of the antennas in the array. PMID:27092501

  4. Antenna Deployment for the Localization of Partial Discharges in Open-Air Substations

    PubMed Central

    Robles, Guillermo; Fresno, José Manuel; Sánchez-Fernández, Matilde; Martínez-Tarifa, Juan Manuel

    2016-01-01

    Partial discharges are ionization processes inside or on the surface of dielectrics that can unveil insulation problems in electrical equipment. The charge accumulated is released under certain environmental and voltage conditions attacking the insulation both physically and chemically. The final consequence of a continuous occurrence of these events is the breakdown of the dielectric. The electron avalanche provokes a derivative of the electric field with respect to time, creating an electromagnetic impulse that can be detected with antennas. The localization of the source helps in the identification of the piece of equipment that has to be decommissioned. This can be done by deploying antennas and calculating the time difference of arrival (TDOA) of the electromagnetic pulses. However, small errors in this parameter can lead to great displacements of the calculated position of the source. Usually, four antennas are used to find the source but the array geometry has to be correctly deployed to have minimal errors in the localization. This paper demonstrates, by an analysis based on simulation and also experimentally, that the most common layouts are not always the best options and proposes a simple antenna layout to reduce the systematic error in the TDOA calculation due to the positions of the antennas in the array. PMID:27092501

  5. The Museum Bag.

    ERIC Educational Resources Information Center

    Gammons, Betsy

    1998-01-01

    Relates an art project for seventh-grade students that uses the creation of museum bags to study portraiture and the painting styles of famous artists. Explains how students made a bag with a portrait of the artist on one side and a painting by that artist on the other. (DSK)

  6. Persistent Organic Pollutants in Semi-permeable Membrane Devices (SPMDs) Deployed in the Ambient Air of Alaska

    NASA Astrophysics Data System (ADS)

    Wu, T. H.; Cahill, C. F.

    2005-12-01

    Triolein containing semi-permeable membrane devices (SPMDs) were deployed in the ambient air of Alaska at five locations (Barrow, Poker Flat Research Range, Denali National Park and Preserve, Trapper Creek and Homer) during a one year study. Samples were screened for polychlorinated biphenyls (PCBs), polyaromatic hydrocarbons (PAHs), and organochlorine compounds (OCPs). Total PCBs ranged from 5-30 ng/SPMD for three-month time-integrated samples. Measurements of selected PAH ratios suggest mixed sources (petrogenic and pyrogenic) at the five locations. The percent ratio of pp-DDT [1,1,1-trichloro-2,2-bis(4-chlorophenyl) ethane] to total DDT (DDT and all metabolites) ranged from 17-66%. A higher percentage may indicate the presence of a fresh input of DDT into the atmosphere or non-metabolized DDT that has remained in the environment. Ratio of trans-chlordane (TC) to cis-chlordane (CC) varied from 0.7-1.2. Higher ratios of TC to CC may indicate fresh input into Alaska from various source regions during deployment of SPMDs.

  7. Anaerobic bag culture method.

    PubMed

    Rosenblatt, J E; Stewart, P R

    1975-06-01

    In a new method of anaerobic culture, a transparent, gas-impermeable bag is used and the anaerobic environment is established with copper sulfate-saturated steel wool. An Alka-Seltzer tablet generates carbon dioxide. The agar plate surface can be inspected through the bag at any time without interrupting the anaerobic atmosphere or disturbing other specimens. Methylene blue indicator strips are completely reduced by 4 h after the bag is set up and have remained reduced for as long as 3 weeks. Growth of 16 different stock culture anaerobes was generally equivalent by the bag and GasPak jar methods. Yield and growth of anaerobic isolates also were equivalent with 7 of 10 clinical specimens; from the other 3 specimens, 13 isolates were recovered, 5 by both the bag and jar methods and the rest by one method or the other. No consistent differences were found between the anaerobic bag and GasPak jar methods in the yield of anaerobes from clinical specimens. Early growth (24 h of incubation) of anaerobes from one specimen was detected with the bag method. PMID:1100671

  8. Anaerobic bag culture method.

    PubMed Central

    Rosenblatt, J E; Stewart, P R

    1975-01-01

    In a new method of anaerobic culture, a transparent, gas-impermeable bag is used and the anaerobic environment is established with copper sulfate-saturated steel wool. An Alka-Seltzer tablet generates carbon dioxide. The agar plate surface can be inspected through the bag at any time without interrupting the anaerobic atmosphere or disturbing other specimens. Methylene blue indicator strips are completely reduced by 4 h after the bag is set up and have remained reduced for as long as 3 weeks. Growth of 16 different stock culture anaerobes was generally equivalent by the bag and GasPak jar methods. Yield and growth of anaerobic isolates also were equivalent with 7 of 10 clinical specimens; from the other 3 specimens, 13 isolates were recovered, 5 by both the bag and jar methods and the rest by one method or the other. No consistent differences were found between the anaerobic bag and GasPak jar methods in the yield of anaerobes from clinical specimens. Early growth (24 h of incubation) of anaerobes from one specimen was detected with the bag method. Images PMID:1100671

  9. Multipurpose Cargo Transfer Bag

    NASA Technical Reports Server (NTRS)

    Broyan, James; Baccus, Shelley

    2014-01-01

    The Logistics Reduction (LR) project within the Advanced Exploration Systems (AES) program is tasked with reducing logistical mass and repurposing logistical items. Multipurpose Cargo Transfer Bags (MCTB) have been designed such that they can serve the same purpose as a Cargo Transfer Bag, the suitcase-shaped common logistics carrying bag for Shuttle and the International Space Station. After use as a cargo carrier, a regular CTB becomes trash, whereas the MCTB can be unzipped, unsnapped, and unfolded to be reused. Reuse ideas that have been investigated include partitions, crew quarters, solar radiation storm shelters, acoustic blankets, and forward osmosis water processing.

  10. STS-76 Landing - Space Shuttle Atlantis Lands at Edwards Air Force Base, Drag Chute Deploy

    NASA Technical Reports Server (NTRS)

    1996-01-01

    The space shuttle Atlantis touches down on the runway at Edwards, California, at approximately 5:29 a.m. Pacific Standard Time after completing the highly successful STS-76 mission to deliver Astronaut Shannon Lucid to the Russian Space Station Mir. She was the first American woman to serve as a Mir station researcher. Atlantis was originally scheduled to land at Kennedy Space Center, Florida, but bad weather there both 30 and 31 March necessitated a landing at the backup site at Edwards. This photo shows the drag chute deployed to help the shuttle roll to a stop. Mission commander for STS-76 was Kevin P. Chilton, and Richard A. Searfoss was the pilot. Ronald M. Sega was payload commander and mission specialist-1. Mission specialists were Richard Clifford, Linda Godwin and Shannon Lucid. The mission also featured a spacewalk while Atlantis was docked to Mir and experiments aboard the SPACEHAB module. Space Shuttles are the main element of America's Space Transportation System and are used for space research and other space applications. The shuttles are the first vehicles capable of being launched into space and returning to Earth on a routine basis. Space Shuttles are used as orbiting laboratories in which scientists and mission specialists conduct a wide variety of scientific experiments. Crews aboard shuttles place satellites in orbit, rendezvous with satellites to carry out repair missions and return them to space, and retrieve satellites and return them to Earth for refurbishment and reuse. Space Shuttles are true aerospace vehicles. They leave Earth and its atmosphere under rocket power provided by three liquid-propellant main engines with two solid-propellant boosters attached plus an external liquid-fuel tank. After their orbital missions, they streak back through the atmosphere and land like airplanes. The returning shuttles, however, land like gliders, without power and on runways. Other rockets can place heavy payloads into orbit, but, they can only be

  11. STS-76 Landing - Space Shuttle Atlantis Lands at Edwards Air Force Base, Drag Chute Deploy

    NASA Technical Reports Server (NTRS)

    1996-01-01

    The space shuttle Atlantis touches down on the runway at Edwards, California, at approximately 5:29 a.m. Pacific Standard Time after completing the highly successful STS-76 mission to deliver Astronaut Shannon Lucid to the Russian Space Station Mir. She was the first American woman to serve as a Mir station researcher. Atlantis was originally scheduled to land at Kennedy Space Center, Florida, but bad weather there both 30 and 31 March necessitated a landing at the backup site at Edwards. This photo shows the drag chute deployed to help the shuttle roll to a stop. Mission commander for STS-76 was Kevin P. Chilton, and Richard A. Searfoss was the pilot. Ronald M. Sega was payload commander and mission specialist-1. Mission specialists were Richard Clifford, Linda Godwin and Shannon Lucid. The mission also featured a spacewalk while Atlantis was docked to Mir and experiments aboard the SPACEHAB module. Space Shuttles are the main element of America's Space Transportation System and are used for space research and other space applications. The shuttles are the first vehicles capable of being launched into space and returning to Earth on a routine basis. Space Shuttles are used as orbiting laboratories in which scientists and mission specialists conduct a wide variety of scientific experiments. Crews aboard shuttles place satellites in orbit, rendezvous with satellites to carry out repair missions and return them to space, and retrieve satellites and return them to Earth for refurbishment and reuse. Space Shuttles are true aerospace vehicles. They leave Earth and its atmosphere under rocket power provided by three liquid-propellant main engines with two solid-propellant boosters attached plus an external liquid-fuel tank. After their orbital missions, they streak back through the atmosphere and land like airplanes. The returning shuttles, however, land like gliders, without power and on runways. Other rockets can place heavy payloads into orbit, but, they can only be

  12. 14. BUILDING NO. 445, PHYSICS LAB (FORMERLY GUN BAG LOADING), ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. BUILDING NO. 445, PHYSICS LAB (FORMERLY GUN BAG LOADING), LOOKING EAST AT SOUTHWEST END OF BUILDING. HVAC EQUIPMENT LOCATED OUTDOORS IN FOREGROUND. DUCTS CONDUCT HOT OR COLD AIR INDOORS. ROUND PIPES ARE INSULATED STEAM LINES. BUILDING NO. 448, ORDNANCE FACILITY, IN BACKGROUND. - Picatinny Arsenal, 400 Area, Gun Bag Loading District, State Route 15 near I-80, Dover, Morris County, NJ

  13. Bag of Bones.

    ERIC Educational Resources Information Center

    Menger, Richard A.

    1994-01-01

    A teacher describes the procedures used by students to mount skeletons of small animals. Equipped with ziplock bags and papain, students can make the cumbersome task of mounting more time efficient and easy. (ZWH)

  14. Urine drainage bags

    MedlinePlus

    ... catheter and urine drainage bag because you have urinary incontinence (leakage), urinary retention (not being able to urinate), ... wall repair Inflatable artificial sphincter Radical prostatectomy Stress urinary incontinence Urge incontinence Urinary incontinence Urinary incontinence - injectable implant ...

  15. User's guide for polyethylene-based passive diffusion bag samplers to obtain volatile organic compound concentrations in wells. Part I, Deployment, recovery, data interpretation, and quality control and assurance

    USGS Publications Warehouse

    Vroblesky, Don A.

    2001-01-01

    Diffusion samplers installed in observation wells were found to be capable of yielding representative water samples for chlorinated volatile organic compounds. The samplers consisted of polyethylene bags containing deionized water and relied on diffusion of chlorinated volatile organic compounds through the polyethylene membrane. The known ability of polyethylene to transmit other volatile compounds, such as benzene and toluene, indicates that the samplers can be used for a variety of volatile organic compounds. In wells at the study area, the volatile organic compound concentrations in water samples obtained using the samplers without prior purging were similar to concentrations in water samples obtained from the respective wells using traditional purging and sampling approaches. The low cost associated with this approach makes it a viable option for monitoring large observation-well networks for volatile organic compounds.

  16. Gravitating lepton bag model

    NASA Astrophysics Data System (ADS)

    Burinskii, A.

    2015-08-01

    The Kerr-Newman (KN) black hole (BH) solution exhibits the external gravitational and electromagnetic field corresponding to that of the Dirac electron. For the large spin/mass ratio, a ≫ m, the BH loses horizons and acquires a naked singular ring creating two-sheeted topology. This space is regularized by the Higgs mechanism of symmetry breaking, leading to an extended particle that has a regular spinning core compatible with the external KN solution. We show that this core has much in common with the known MIT and SLAC bag models, but has the important advantage of being in accordance with the external gravitational and electromagnetic fields of the KN solution. A peculiar two-sheeted structure of Kerr's gravity provides a framework for the implementation of the Higgs mechanism of symmetry breaking in configuration space in accordance with the concept of the electroweak sector of the Standard Model. Similar to other bag models, the KN bag is flexible and pliant to deformations. For parameters of a spinning electron, the bag takes the shape of a thin rotating disk of the Compton radius, with a ring-string structure and a quark-like singular pole formed at the sharp edge of this disk, indicating that the considered lepton bag forms a single bag-string-quark system.

  17. Blue collection bag after ileal diversion.

    PubMed

    Hildreth, T A; Cass, A S

    1978-02-01

    Five children with ileal diversions have shown asymptomatic blue staining of the urine collection bags. A tryptophan derivative (indican) in the urine that oxidizes to indigo blue on exposure to air is thought to be the cause of this benign transient phenomenon. PMID:628994

  18. BAG4/SODD Protein Contains a Short BAG Domain

    SciTech Connect

    Briknarova, Klara; Takayama, Shinichi; Homma, Sachiko; Baker, Kelly; Cabezas, Edelmira; Hoyt, David W.; Li, Zhen; Satterthwait, Arnold C.; Ely, Kathryn R.

    2002-08-23

    BAG proteins are molecular chaperone regulators that affect diverse cellular pathways. All members share a conserved motif, called the ''BAG domain'' (BD), which binds to Hsp70/Hsc70 family proteins and modulates their activity. We have determined the solution structure of BD from BAG4/SODD (Bcl-2 ? Associated Athanogene / Silencer of Death Domains) by multidimensional nuclear magnetic resonance methods and compared it to the corresponding domain in BAG1 (Briknarova et al., Nature Struct. Biol. 8:349-352). The difference between BDs from these two BAG proteins is striking and the structural comparison defines two subfamilies of mammalian BD-containing proteins. One subfamily includes the closely related BAG3, BAG4 and BAG5 proteins, and the other is represented by BAG1 which contains a structurally and evolutionarily distinct BD. BDs from both BAG1 and BAG4 are three-helix bundles; however, in BAG4, each helix in this bundle is three to four turns shorter than its counterpart in BAG1, which reduces the length of the domain by one-third. BAG4 BD thus represents a prototype of the minimal functional fragment that is capable of binding to Hsc70 and modulating its chaperone activity.

  19. Gravitating lepton bag model

    SciTech Connect

    Burinskii, A.

    2015-08-15

    The Kerr–Newman (KN) black hole (BH) solution exhibits the external gravitational and electromagnetic field corresponding to that of the Dirac electron. For the large spin/mass ratio, a ≫ m, the BH loses horizons and acquires a naked singular ring creating two-sheeted topology. This space is regularized by the Higgs mechanism of symmetry breaking, leading to an extended particle that has a regular spinning core compatible with the external KN solution. We show that this core has much in common with the known MIT and SLAC bag models, but has the important advantage of being in accordance with the external gravitational and electromagnetic fields of the KN solution. A peculiar two-sheeted structure of Kerr’s gravity provides a framework for the implementation of the Higgs mechanism of symmetry breaking in configuration space in accordance with the concept of the electroweak sector of the Standard Model. Similar to other bag models, the KN bag is flexible and pliant to deformations. For parameters of a spinning electron, the bag takes the shape of a thin rotating disk of the Compton radius, with a ring–string structure and a quark-like singular pole formed at the sharp edge of this disk, indicating that the considered lepton bag forms a single bag–string–quark system.

  20. Facility monitoring of chemical warfare agent simulants in air using an automated, field-deployable, miniature mass spectrometer.

    PubMed

    Smith, Jonell N; Noll, Robert J; Cooks, R Graham

    2011-05-30

    Vapors of four chemical warfare agent (CWA) stimulants, 2-chloroethyl ethyl sulfide (CEES), diethyl malonate (DEM), dimethyl methylphosphonate (DMMP), and methyl salicylate (MeS), were detected, identified, and quantitated using a fully automated, field-deployable, miniature mass spectrometer. Samples were ionized using a glow discharge electron ionization (GDEI) source, and ions were mass analyzed with a cylindrical ion trap (CIT) mass analyzer. A dual-tube thermal desorption system was used to trap compounds on 50:50 Tenax TA/Carboxen 569 sorbent before their thermal release. The sample concentrations ranged from low parts per billion [ppb] to two parts per million [ppm]. Limits of detection (LODs) ranged from 0.26 to 5.0 ppb. Receiver operating characteristic (ROC) curves are presented for each analyte. A sample of CEES at low ppb concentration was combined separately with two interferents, bleach (saturated vapor) and diesel fuel exhaust (1%), as a way to explore the capability of detecting the simulant in an environmental matrix. Also investigated was a mixture of the four CWA simulants (at concentrations in air ranging from 270 to 380 ppb). Tandem mass (MS/MS) spectral data were used to identify and quantify the individual components. PMID:21504010

  1. Bag filters for TPP

    SciTech Connect

    L.V. Chekalov; Yu.I. Gromov; V.V. Chekalov

    2007-05-15

    Cleaning of TPP flue gases with bag filters capable of pulsed regeneration is examined. A new filtering element with a three-dimensional filtering material formed from a needle-broached cloth in which the filtration area, as compared with a conventional smooth bag, is increased by more than two times, is proposed. The design of a new FRMI type of modular filter is also proposed. A standard series of FRMI filters with a filtration area ranging from 800 to 16,000 m{sup 2} is designed for an output more than 1 million m{sub 3}/h of with respect to cleaned gas. The new bag filter permits dry collection of sulfur oxides from waste gases at TPP operating on high-sulfur coals. The design of the filter makes it possible to replace filter elements without taking the entire unit out of service.

  2. Use of the Air Force Post-Deployment Health Reassessment for the Identification of Depression and Posttraumatic Stress Disorder: Public Health Implications for Suicide Prevention

    PubMed Central

    McCarthy, Michael D.; Knox, Kerry L.

    2012-01-01

    Objectives. Military members are required to complete the Post-Deployment Health Assessment on return from deployment and the Post-Deployment Health Reassessment (PHDRA) 90 to 180 days later, and we assessed the PDHRA’s sensitivity and specificity in identifying posttraumatic stress disorder (PTSD) and depression after a military deployment among US Air Force personnel. Methods. We computed the PDHRA’s sensitivity and specificity for depression and PTSD and developed a structural model to suggest possible improvements to it. Results. For depression, sensitivity and specificity were 0.704 and 0.651, respectively; for PTSD, they were 0.774 and 0.650, respectively. Several variables produced significant direct effects on depression and trauma, suggesting that modifications could increase its sensitivity and specificity. Conclusions. The PDHRA was moderately effective in identifying airmen with depression and PTSD. It identified behavioral health concerns in many airmen who did not develop a diagnostic mental health condition. Its low level of specificity may result in reduced barriers to care and increased support services, key components of a public health approach to suicide prevention, for airmen experiencing subacute levels of distress after deployment, which may, in part, account for lower suicide rates among airmen after deployment. PMID:22390604

  3. Better Physician's 'Black Bags'

    NASA Technical Reports Server (NTRS)

    1976-01-01

    The "black bag" is outgrowth of astronaut monitoring technology from NASA's Johnson Space Center. Technically known as the portable medical status system, a highly advanced physician's "black bag" weighs less than 30 pounds, yet contains equipment for monitoring and recording vital signs, electrocardiograms, and electroencephalograms. Liquid crystal displays are used to present 15 digits of data simultaneously for long periods of time without excessive use of battery power. Single printed circuit card contains all circuitry required to measure and display vital signs such as heart and respiration rate, temperature, and blood pressure.

  4. Online Bagging and Boosting

    NASA Technical Reports Server (NTRS)

    Oza, Nikunji C.

    2005-01-01

    Bagging and boosting are two of the most well-known ensemble learning methods due to their theoretical performance guarantees and strong experimental results. However, these algorithms have been used mainly in batch mode, i.e., they require the entire training set to be available at once and, in some cases, require random access to the data. In this paper, we present online versions of bagging and boosting that require only one pass through the training data. We build on previously presented work by presenting some theoretical results. We also compare the online and batch algorithms experimentally in terms of accuracy and running time.

  5. The Bag Hatter.

    ERIC Educational Resources Information Center

    Meilach, Dona Z.

    2001-01-01

    Discusses the artwork of a Hawaiian artist named Moses who made hats out of paper bags by twisting, crumbling, and other methods. Designs were inspired by a person, event, or idea. Provides a list of project ideas based on the work of Moses. (CMK)

  6. Lunar Regolith Bagging System

    NASA Technical Reports Server (NTRS)

    Brown, Sebrina; Lundberg, Kimberly; Mcgarity, Ginger; Silverman, Philip

    1990-01-01

    A regolith container to be used as a fundamental building block in radiation protection of a habitable lunar base was designed. Parameters for the container are its: size, shape, material, and structural design. Also, a machine was designed to fill the regolith container which is capable of grasping and opening an empty container, filling it, closing it when full, and depositing it on the surface of the Moon. The simple design will bag lunar soil in a relatively short amount of time, with a low equipment weight, and with moving parts distanced from the dirt. The bags are made out of Kevlar 149 with a fabric weight of 6 oz. per square yard. All machine parts are composed of aluminum 6061-T6. Assuming that the vehicle runs at 7 km/hr for 8 hours a day, the machine will bag the necessary 450 cu m of soil in about 12 days. The total mass of the bags and the machine to be shipped to the Moon will be 687 kg. The cost of shipping this weight will be $6.23 million.

  7. Book Bag Buddies

    ERIC Educational Resources Information Center

    Madden, Angie; Townsend, J. Scott; Green, Jennifer

    2011-01-01

    Children love to learn about new topics and share what they have discovered with their teachers, families, and friends. The authors designed the "Book Bag Buddies" project to give their third-grade students a chance to channel their enthusiasm and research from science investigations into writing. In this creative project, students integrated…

  8. Storing Peanuts in Grain Bags

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A study was executed to determine the potential of storing farmers stock peanuts and shelled peanuts for crushing in hermetically sealed grain bags. The objectives of the study were to evaluate equipment for loading and unloading the grain bags, the capacity of the grain bags, and the changes in qu...

  9. Purple Urine Bag Syndrome.

    PubMed

    Abubacker, Naufal Rizwan Taraganar; Jayaraman, Senthil Manikandan Thirumanilayur; R, Kannan; Sivanesan, Magesh Kumar; Mathew, Renu

    2015-08-01

    Purple urine bag syndrome (PUBS) is a rare disorder seen in elderly persons, wherein the urinary bag and the tubing turn in to purple colour. It is usually seen in patients who are on urinary catheters for a long time. Purple coloured urine occurs due to the accumulation of indigo and indirubin, which are the end products of tryptophan metabolism due to the action of sulfatases and phosphatases formed by bacteria like Providencia, Citrobacter, Enterobacter, Klebsiella etc. We present this interesting phenomenon of purple urine in a young male who was on prolonged urinary catheterization. The urine culture was positive for Providencia and constipation was an added risk factor for the purple urine. The urinary catheter and tubing was changed along with a course of antibiotics which lead to the normalization of the urine colour. PMID:26435987

  10. The purple bag syndrome.

    PubMed

    McSherry, J A

    1980-10-01

    This is an account of an unusual case of purple discoloration of plastic disposable urethral catheters and urine collecting bags. The likely causes are discussed with reference to the analogous situation of purple diapers in children. In this instance it appears that the phenomenon may have been due to the presence of indigo in the urine as a degradation product of tryptophan in the bowel lumen. PMID:21293710

  11. Material bagging device

    DOEpatents

    Wach, Charles G.; Nelson, Robert E.; Brak, Stephen B.

    1984-01-01

    A bagging device for transferring material from one chamber through an opening in a wall to a second chamber includes a cylindrical housing communicating with the opening and defining a passage between the chambers. A cylindrical cartridge is slidably received within the housing. The cartridge has a substantially rigid cylindrical sleeve to which is affixed a pliable tube. The pliable tube is positioned concentrically about the sleeve and has a pleated portion capable of unfolding from the sleeve and a closed end extending over a terminal end of the sleeve. Sealing means are interposed in sealed relationship between the cartridge and the housing. Material from one chamber is inserted into the cartridge secured in the housing and received in the closed end of the tube which unfolds into the other chamber enclosing the material therein. The tube may then be sealed behind the material and then severed to form a bag-like enclosure defined by the tube's closed terminal end and the new seal. The new seal then forms a terminal end for the unsevered portion of the pliable tube into which additional material may be placed and the bagging process repeated.

  12. 24. BUILDING NO. 452, ORDNANCE FACILITY (BAG CHARGE FILLING PLANT), ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    24. BUILDING NO. 452, ORDNANCE FACILITY (BAG CHARGE FILLING PLANT), INTERIOR VIEW LOOKING WEST AT NORTH END OF CENTRAL CORRIDOR (ROOM 3). STAIRWAY WORKBENCH WITH COMPRESSED-AIR POWERED CARTRIDGE LOADER. ARMORED PASS-THROUGH OF TRANSFER BOX FOR PASSING EXPLOSIVES MATERIALS THROUGH TO NEXT ROOM TO THE NORTH. - Picatinny Arsenal, 400 Area, Gun Bag Loading District, State Route 15 near I-80, Dover, Morris County, NJ

  13. Overview of Deployed EDS Technologies

    SciTech Connect

    Martz, H E; Crawford, C

    2009-09-24

    The term explosive detection system (EDS) is used by the TSA to describe equipment that is certified to detect explosives in checked bags. The EDS, as certified, by the TSL must consist of device for interrogating a bag and an automated detection algorithm (ATD) for evaluating the results of the interrogation. We only consider CT as the interrogation device in this report. A schematic drawing of a CT-based EDS is shown in Figure 2. The output of the ATD is the binary decision of alarm or non-alarm. Alarms may true- or false-positives. Non-alarms may be true- or false-negatives. False positives are also denoted false alarms. The true detection means that the ATD reports an alarm when a threat is present in the scanned bag. The probability of detecting a threat given that a threat is present is denoted the probability of detection (PD). The probability of false alarm (PFA) is the case when an alarm is reported when a threat is not present in a bag. Certification in this context means passing tests for PD and PFA at the TSL. The results of the EDS include CT cross-sectional images of the bag and specifics about the alarmed objects generated by ATD. These results are presented on a display so that a person may override the decision of ATD and declare the alarm to be a non-alarm. This process is denoted clearing. Bags that are not cleared by the person are sent to a secondary inspection process. Here the bags may be opened or assessed with explosive trace detection (ETD) in order to clear the bags. Bags that are not cleared at this point are evaluated by an ordinance disposal team. The CT scanner along with ATD is denoted Level 1 screening. The process of clearing on a display is denoted Level 2 screening. Secondary inspection is denoted Level 3 screening. Vendors of the deployed EDSs supply the TSA with equipment for all three levels. Therefore, the term EDS may include the equipment provided for Levels 1, 2 and 3. A schematic diagram of an EDS and the levels of

  14. Comparison of storage stability of odorous VOCs in polyester aluminum and polyvinyl fluoride tedlar bags

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Whole air sampling using containers such as flexible bags or rigid canisters is commonly used to collect samples of volatile organic compounds (VOC) in air. The objective of this study was to compare the stability of polyester aluminum (PEA) and polyvinyl fluoride (PVF, brand name Tedlar®) bags for ...

  15. Deployable antenna

    NASA Technical Reports Server (NTRS)

    Fink, Patrick W. (Inventor); Dobbins, Justin A. (Inventor); Lin, Greg Y. (Inventor); Chu, Andrew W. (Inventor); Scully, Robert C. (Inventor)

    2006-01-01

    A deployable antenna and method for using wherein the deployable antenna comprises a collapsible membrane having at least one radiating element for transmitting electromagnetic waves, receiving electromagnetic waves, or both.

  16. Multiyear ice transport and small scale sea ice deformation near the Alaska coast measured by air-deployable Ice Trackers

    NASA Astrophysics Data System (ADS)

    Mahoney, A. R.; Kasper, J.; Winsor, P.

    2015-12-01

    Highly complex patterns of ice motion and deformation were captured by fifteen satellite-telemetered GPS buoys (known as Ice Trackers) deployed near Barrow, Alaska, in spring 2015. Two pentagonal clusters of buoys were deployed on pack ice by helicopter in the Beaufort Sea between 20 and 80 km offshore. During deployment, ice motion in the study region was effectively zero, but two days later the buoys captured a rapid transport event in which multiyear ice from the Beaufort Sea was flushed into the Chukchi Sea. During this event, westward ice motion began in the Chukchi Sea and propagated eastward. This created new openings in the ice and led to rapid elongation of the clusters as the westernmost buoys accelerated away from their neighbors to the east. The buoys tracked ice velocities of over 1.5 ms-1, with fastest motion occurring closest to the coast indicating strong current shear. Three days later, ice motion reversed and the two clusters became intermingled, rendering divergence calculations based on the area enclosed by clusters invalid. The data show no detectable difference in velocity between first year and multiyear ice floes, but Lagrangian timeseries of SAR imagery centered on each buoy show that first year ice underwent significant small-scale deformation during the event. The five remaining buoys were deployed by local residents on prominent ridges embedded in the landfast ice within 16 km of Barrow in order to track the fate of such features after they detached from the coast. Break-up of the landfast ice took place over a period of several days and, although the buoys each initially followed a similar eastward trajectory around Point Barrow into the Beaufort Sea, they rapidly dispersed over an area more than 50 km across. With rapid environmental and socio-economic change in the Arctic, understanding the complexity of nearshore ice motion is increasingly important for predict future changes in the ice and the tracking ice-related hazards

  17. Fun and Functional Shopping Bags

    ERIC Educational Resources Information Center

    Owen, Barbara Downing

    2009-01-01

    In conjunction with her school's interest in becoming more "green," this author designed an art project using inexpensive, sturdy, reusable grocery bags. In this article, she describes the different design concepts and art media used by each grade in decorating these bags. (Contains 1 online resource.)

  18. Vapor pressure measured with inflatable plastic bag

    NASA Technical Reports Server (NTRS)

    1965-01-01

    Deflated plastic bag in a vacuum chamber measures initial low vapor pressures of materials. The bag captures the test sample vapors and visual observation of the vapor-inflated bag under increasing external pressures yields pertinent data.

  19. Reducing Mission Logistics with Multipurpose Cargo Transfer Bags

    NASA Technical Reports Server (NTRS)

    Baccus, Shelley; Broyan, James Lee, Jr.; Borrego, Melissa

    2016-01-01

    The Logistics Reduction (LR) project within Advanced Exploration Systems (AES) is tasked with reducing logistical mass and repurposing logistical items. Multipurpose Cargo Transfer Bags (MCTB) have been designed such that they can serve the same purpose as a Cargo Transfer Bag (CTB), the common logistics carrying bag for the International Space Station (ISS). After use as a cargo carrier, a regular CTB becomes trash, whereas the MCTB can be unfolded into a flat panel for reuse. Concepts and potential benefits for various MCTB applications will be discussed including partitions, crew quarters, solar radiation storm shelters, acoustic blankets, and forward osmosis water processing. Acoustic MCTBs are currently in use on ISS to reduce the noise generated by the T2 treadmill, which reaches the hazard limit at high speeds. The development of the AMCTB included identification of keep-out zones, acoustic properties, deployment considerations, and structural testing. Features developed for these considerations are applicable to MCTBs for all crew outfitting applications.

  20. Multipurpose Cargo Transfer Bags fro Reducing Exploration Mission Logistics

    NASA Technical Reports Server (NTRS)

    Baccus, Shelley; Broyan, James Lee, Jr.; Borrego, Melissa

    2016-01-01

    The Logistics Reduction (LR) project within the Advanced Exploration Systems (AES) division is tasked with reducing logistical mass and repurposing logistical items. Multipurpose Cargo Transfer Bags (MCTB) have been designed such that they can serve the same purpose as a Cargo Transfer Bag (CTB), the common logistics carrying bag for the International Space Station (ISS). After use as a cargo carrier, a regular CTB becomes trash, whereas the MCTB can be unfolded into a flat panel for reuse. Concepts and potential benefits for various MCTB applications will be discussed including partitions, crew quarters, solar radiation storm shelters, acoustic blankets, and forward osmosis water processing. Acoustic MCTBs are currently in use on ISS to reduce the noise generated by the T2 treadmill, which reaches the hazard limit at high speeds. The development of the AMCTB included identification of keep out zones, acoustic properties, deployment considerations, and structural testing. Features developed for these considerations are applicable to MCTBs for all crew outfitting applications.

  1. Real-time sensors for indoor air monitoring and challenges ahead in deploying them to urban buildings.

    PubMed

    Kumar, Prashant; Skouloudis, Andreas N; Bell, Margaret; Viana, Mar; Carotta, M Cristina; Biskos, George; Morawska, Lidia

    2016-08-01

    Household air pollution is ranked the 9(th) largest Global Burden of Disease risk (Forouzanfar et al., The Lancet 2015). People, particularly urban dwellers, typically spend over 90% of their daily time indoors, where levels of air pollution often surpass those of outdoor environments. Indoor air quality (IAQ) standards and approaches for assessment and control of indoor air require measurements of pollutant concentrations and thermal comfort using conventional instruments. However, the outcomes of such measurements are usually averages over long integrated time periods, which become available after the exposure has already occurred. Moreover, conventional monitoring is generally incapable of addressing temporal and spatial heterogeneity of indoor air pollution, or providing information on peak exposures that occur when specific indoor sources are in operation. This article provides a review of new air pollution sensing methods to determine IAQ and discusses how real-time sensing could bring a paradigm shift in controlling the concentration of key air pollutants in billions of urban houses worldwide. We also show that besides the opportunities, challenges still remain in terms of maturing technologies, or data mining and their interpretation. Moreover, we discuss further research and essential development needed to close gaps between what is available today and needed tomorrow. In particular, we demonstrate that awareness of IAQ risks and availability of appropriate regulation are lagging behind the technologies. PMID:27101450

  2. Cross-Validated Bagged Learning

    PubMed Central

    Petersen, Maya L.; Molinaro, Annette M.; Sinisi, Sandra E.; van der Laan, Mark J.

    2007-01-01

    Many applications aim to learn a high dimensional parameter of a data generating distribution based on a sample of independent and identically distributed observations. For example, the goal might be to estimate the conditional mean of an outcome given a list of input variables. In this prediction context, bootstrap aggregating (bagging) has been introduced as a method to reduce the variance of a given estimator at little cost to bias. Bagging involves applying an estimator to multiple bootstrap samples, and averaging the result across bootstrap samples. In order to address the curse of dimensionality, a common practice has been to apply bagging to estimators which themselves use cross-validation, thereby using cross-validation within a bootstrap sample to select fine-tuning parameters trading off bias and variance of the bootstrap sample-specific candidate estimators. In this article we point out that in order to achieve the correct bias variance trade-off for the parameter of interest, one should apply the cross-validation selector externally to candidate bagged estimators indexed by these fine-tuning parameters. We use three simulations to compare the new cross-validated bagging method with bagging of cross-validated estimators and bagging of non-cross-validated estimators. PMID:19255599

  3. PPS fibers allow gas bag filters to replace scrubbers

    SciTech Connect

    1996-11-01

    Wisconsin Electric Power Co. (WEPCO) met the latest federal clean air standards by installing a new pollution control system using fabric filter bags to trap superheated ash and other contaminants at its coal-fired Valley Power Plant. The 6-inch diameter, 20-foot-long filter bags are made form fibers produced by Amoco Fabrics and Fibers (Greenville, South Carolina) using Ryton{reg_sign} polyphenylene sulfide (PPS), an engineering thermoplastic produced by Phillips Chemical Co. (Bartlesville, Oklahoma). The Valley Power Plant produces steam-generated electricity and steam heat for customers in downtown Milwaukee. The plant`s pollution control system is fitted with four bag-house units, each serving one of the four coal-fired boilers. The system contains 18,000 filter bags (560 bags per module, with eight modules in each baghouse). Each house has 4,480 bags to handle a flue stream of up to 400,000 cubic feet per minute at temperatures between 280 F and 320 F.

  4. Comparison of passive diffusion bag samplers and submersible pump sampling methods for monitoring volatile organic compounds in ground water at Area 6, Naval Air Station, Whidbey Island, Washington

    USGS Publications Warehouse

    Huffman, Raegan L.

    2002-01-01

    Ground-water samples were collected in April 1999 at Naval Air Station Whidbey Island, Washington, with passive diffusion samplers and a submersible pump to compare concentrations of volatile organic compounds (VOCs) in water samples collected using the two sampling methods. Single diffusion samplers were installed in wells with 10-foot screened intervals, and multiple diffusion samplers were installed in wells with 20- to 40-foot screened intervals. The diffusion samplers were recovered after 20 days and the wells were then sampled using a submersible pump. VOC concentrations in the 10-foot screened wells in water samples collected with diffusion samplers closely matched concentrations in samples collected with the submersible pump. Analysis of VOC concentrations in samples collected from the 20- to 40-foot screened wells with multiple diffusion samplers indicated vertical concentration variation within the screened interval, whereas the analysis of VOC concentrations in samples collected with the submersible pump indicated mixing during pumping. The results obtained using the two sampling methods indicate that the samples collected with the diffusion samplers were comparable with and can be considerably less expensive than samples collected using a submersible pump.

  5. Identification of control parameters for the sulfur gas storability with bag sampling methods

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Air samples containing sulfur compounds are often collected and stored in sample bags prior to analyses. The storage stability of six gaseous sulfur compounds (H2S, CH3SH, DMS, CS2, DMDS and SO2) was compared between two different bag materials (polyvinyl fluoride (PVF) and polyester aluminum (PEA))...

  6. Ammonia diffusion through Nalophan™ bags.

    PubMed

    Sironi, Selena; Eusebio, Lidia; Dentoni, Licinia; Capelli, Laura; Del Rosso, Renato

    2014-01-01

    The aim of the work is to verify the diffusion rate of ammonia through the Nalophan™ film that constitutes the sampling bag, considering storage times ranging from 1 to 26 h. The ammonia decay over time was evaluated using gas-chromatography for the quantification of ammonia concentration inside the bag. The research assesses the roles of both of ammonia and water concentration gradients at the polymeric film interface on the diffusion process. The results show that both the ammonia concentration gradient and, in a less pronounced way, the water concentration gradient are the main 'engines' of ammonia diffusion. Double bags seem to represent a simple solution for preventing ammonia losses during storage. Another interesting result concerns the role of the bag surface on the ammonia diffusion rate: the higher the surface/volume (S/V) ratio, the higher the ammonia diffusion rate through the polymeric film. PMID:24552718

  7. Development of Spray on Bag for manufacturing of large composites parts: Diffusivity analysis

    NASA Astrophysics Data System (ADS)

    Dempah, Maxime Joseph

    Bagging materials are utilized in many composites manufacturing processes. The selection is mainly driven by cost, temperature requirements, chemical compatibility and tear properties of the bag. The air barrier properties of the bag are assumed to be adequate or in many cases are not considered at all. However, the gas barrier property of a bag is the most critical parameter, as it can negatively affect the quality of the final laminate. The barrier property is a function of the bag material, uniformity, thickness and temperature. Improved barrier properties are needed for large parts, high pressure consolidated components and structures where air stays entrapped on the part surface. The air resistance property of the film is defined as permeability and is investigated in this thesis. A model was developed to evaluate the gas transport through the film and an experimental cell was implemented to characterize various commercial films. Understanding and characterizing the transport phenomena through the film allows optimization of the bagging material for various manufacturing processes. Spray-on-Bag is a scalable alternative bagging method compared to standard films. The approach allows in-situ fabrication of the bag on large and complex geometry structures where optimization of the bag properties can be varied on a local level. An experimental setup was developed and implemented using a six axis robot and an automated spraying system. Experiments were performed on a flat surface and specimens were characterized and compared to conventional films. Air barrier properties were within range of standard film approaches showing the potential to fabricate net shape bagging structures in an automated process.

  8. Development and deployment of AQUIS: A PC-based emission inventory calculator and air information management system

    SciTech Connect

    Smith, A.E.; Tschanz, J.; Monarch, M.; Narducci, P.; Bormet, S.

    1995-06-01

    The Air Quality Utility Information System (AQUIS) is a database management system. AQUIS assists users in calculation emissions, both traditional and toxic, and tracking and reporting emissions and source information. With some facilities having over 1200 sources and AQUIS calculating as many as 125 pollutants for a single source, tracking and correlating this information involve considerable effort. Originally designed for use at seven facilities of the Air Force Material Command, the user community has expanded to over 50 facilities since last reported at the 1993 Air and Waste Management Association (AWMA) annual meeting. This expansion in the user community has provided an opportunity to test the system under expanded operating conditions and in applications not anticipated during original system design. User feedback is used to determine needed enhancements and features and to prioritize the content of new releases. In responding to evolving user needs and new emission calculation procedures, it has been necessary to reconfigure AQUIS several times. Reconfigurations have ranged from simple to complex. These changes have necessitated augmenting quality assurance (QA) and validation procedures.

  9. Reverse gas-flow bag filter

    SciTech Connect

    Noddin, E.L.

    1981-01-13

    A description is given of a bag filter having a self-sealing cuff at the upper open end thereof, a bottom support at the closed end to tension the bag and prevent flapping and a plurality of spaced anticollapse rings each of which encircles an annular outer surface of the bag to which it is attached between the ends of the bag to prevent bag collapse.

  10. [Pastel in the urine bag].

    PubMed

    Cantaloube, Lucie; Lebaudy, Cécile; Hermabessière, Sophie; Rolland, Yves

    2012-03-01

    Purple urine bag syndrome is a relatively unknown phenomenon in which the urine bag and the collector of chronically catheterized patients turn purple or blue. It affects predominantly women, and is mainly reported in elderly patients. The mechanism seems to be related to the appearance in the urine of two compounds that have been identified as indigo (blue) and indirubin (red) which bind to the urine bag and the collector. Several associated factors are usually mentioned such as constipation, alkaline urine, bed rest, institutionalization or cognitive impairment. They are risk factor of this phenomenon. On the other hand, an infection or a urinary bacterial colonization is necessary and high bacterial counts seem to be the critical step in the development of the purple urine bag syndrome. We report on two cases of purple urine bag syndrome observed in two patients being treated in a long-term care unit. Both of whom were diagnosed with indwelling urinary bacterial colonization, with Escherichia coli and Pseudomonas aeruginosa respectively. PMID:22414392

  11. Spatio-temporal dynamics of biogeochemical processes and air-sea CO2 fluxes in the Western English Channel based on two years of FerryBox deployment

    NASA Astrophysics Data System (ADS)

    Marrec, P.; Cariou, T.; Latimier, M.; Macé, E.; Morin, P.; Vernet, M.; Bozec, Y.

    2014-12-01

    From January 2011 to January 2013, a FerryBox system was installed on a Voluntary Observing Ship (VOS), which crossed the Western English Channel (WEC) between Roscoff (France) and Plymouth (UK) up to 3 times a day. The FerryBox continuously measured sea surface temperature (SST), sea surface salinity (SSS), dissolved oxygen (DO), fluorescence and partial pressure of CO2 (from April 2012) along the ferry track. Sensors were calibrated based on 714 bimonthly surface samplings with precisions of 0.016 for SSS, 3.3 μM for DO, 0.40 μg L- 1 for Chlorophyll-a (Chl-a) (based on fluorescence measurements) and 5.2 μatm for pCO2. Over the 2 years of deployment (900 crossings), we reported 9% of data lost due to technical issues and quality checked data was obtained to allow investigation of the dynamics of biogeochemical processes related to air-sea CO2 fluxes in the WEC. Based on this unprecedented high-frequency dataset, the physical structure of the WEC was assessed using SST anomalies and the presence of a thermal front was observed around the latitude 49.5°N, which divided the WEC in two main provinces: the seasonally stratified northern WEC (nWEC) and the all-year well-mixed southern WEC (sWEC). These hydrographical properties strongly influenced the spatial and inter-annual distributions of phytoplankton blooms, which were mainly limited by nutrients and light availability in the nWEC and the sWEC, respectively. Air-sea CO2 fluxes were also highly related to hydrographical properties of the WEC between late April and early September 2012, with the sWEC a weak source of CO2 to the atmosphere of 0.9 mmol m- 2 d- 1, whereas the nWEC acted as a sink for atmospheric CO2 of 6.9 mmol m- 2 d- 1. The study of short time-scale dynamics of air-sea CO2 fluxes revealed that an intense and short (less than 10 days) summer bloom in the nWEC contributed to 29% of the CO2 sink during the productive period, highlighting the necessity for high frequency observations in coastal

  12. A gravitating electroweak bag model

    NASA Astrophysics Data System (ADS)

    Burinskii, Alexander

    2016-02-01

    Gravitational and electromagnetic (EM) field of electron is described by the Kerr-Newman (KN) black hole solution with a topological defect. Regularization of this defect by the Higgs field leads to the smooth source which shares much in common with the known MIT- and SLAC- bag models, but has the advantage, of matching gravitational and electromagnetic fields of the electron. This model is flexible, and the rotating KN bag takes the shape of a thin disk with a circular string positioned on the sharp border of the disk. We consider the lowest excitations of the KN solution and the corresponding deformations of the bag surface, setting a preliminary correspondence with electroweak sector of the SM.

  13. Double Vacuum Bag Process for Resin Matrix Composite Manufacturing

    NASA Technical Reports Server (NTRS)

    Hou, Tan-Hung (Inventor); Jensen, Brian J. (Inventor)

    2007-01-01

    A double vacuum bag molding assembly with improved void management and laminate net shape control which provides a double vacuum enviromnent for use in fabricating composites from prepregs containing air and/or volatiles such as reactive resin matrix composites or composites from solvent containing prepregs with non-reactive resins matrices. By using two vacuum environments during the curing process, a vacuum can be drawn during a B-stage of a two-step cycle without placing the composite under significant relative pressure. During the final cure stage, a significant pressure can be applied by releasing the vacuum in one of the two environments. Inner and outer bags are useful for creating the two vacuum environments with a perforated tool intermediate the two. The composite is placed intermediate a tool plate and a caul plate in the first environment with the inner bag and tool plate defining the first environment. The second environment is characterized by the outer bag which is placed over the inner bag and the tool plate.

  14. Quark gluon bags as reggeons

    SciTech Connect

    Bugaev, K. A.; Petrov, V. K.; Zinovjev, G. M.

    2009-05-15

    The influence of the medium-dependent finite width of quark gluon plasma (QGP) bags on their equation of state is analyzed within an exactly solvable model. It is argued that the large width of the QGP bags not only explains the observed deficit in the number of hadronic resonances but also clarifies the reason why the heavy QGP bags cannot be directly observed as metastable states in a hadronic phase. The model allows us to estimate the minimal value of the width of QGP bags being heavier than 2 GeV from a variety of the lattice QCD data and get that the minimal resonance width at zero temperature is about 600 MeV, whereas the minimal resonance width at the Hagedorn temperature is about 2000 MeV. As shown, these estimates are almost insensitive to the number of the elementary degrees of freedom. The recent lattice QCD data are analyzed and it is found that in addition to the {sigma}T{sup 4} term the lattice QCD pressure contains T-linear and T{sup 4}lnT terms in the range of temperatures between 240 and 420 MeV. The presence of the last term in the pressure bears almost no effect on the width estimates. Our analysis shows that at high temperatures the average mass and width of the QGP bags behave in accordance with the upper bound of the Regge trajectory asymptotics (the linear asymptotics), whereas at low temperatures they obey the lower bound of the Regge trajectory asymptotics (the square root one). Since the model explicitly contains the Hagedorn mass spectrum, it allows us to remove an existing contradiction between the finite number of hadronic Regge families and the Hagedorn idea of the exponentially growing mass spectrum of hadronic bags.

  15. Submicron Aerosol Particle Losses in Metalized Bags.

    NASA Astrophysics Data System (ADS)

    Lecinski, Alice

    1980-07-01

    Two new types of conducting bags were tested for aerosol particle storage and sampling, a 3M Company Velostat bag and a bag constructed from 3M Type 2100 Static Shielding Film. The half-lives of unipolar, unit-charged 0.025 m, 0.050 m and 0.090 m sized aerosol particles stored in the Velostat bag and the film bag were 130, 190 and 270 min and 40, 70 and 180 min, respectively. These results depend upon the history of bag filling. The values given here apply to bags which had not previously been filled on the day of experimentation. The lifetimes exhibited by the aerosol particles stored in the Velostat bag are the longest found to data.

  16. Reviews Toy: Air swimmers Book: Their Arrows will Darken the Sun: The Evolution and Science of Ballistics Book: Physics Experiments for your Bag Book: Quantum Physics for Poets Equipment: SEP colour wheel kit Equipment: SEP colour mixing kit Software: USB DrDAQ App: iHandy Level Equipment: Photonics Explorer kit Web Watch

    NASA Astrophysics Data System (ADS)

    2012-01-01

    WE RECOMMEND Air swimmers Helium balloon swims like a fish Their Arrows will Darken the Sun: The Evolution and Science of Ballistics Ballistics book hits the spot Physics Experiments for your Bag Handy experiments for your lessons Quantum Physics for Poets Book shows the economic importance of physics SEP colour wheel kit Wheels investigate colour theory SEP colour mixing kit Cheap colour mixing kit uses red, green and blue LEDs iHandy Level iPhone app superbly measures angles Photonics Explorer kit Free optics kit given to schools WORTH A LOOK DrDAQ DrDAQ software gets an upgrade WEB WATCH Websites show range of physics

  17. Brown Bag Ideas: The Parfleche.

    ERIC Educational Resources Information Center

    Tejada, Irene

    1985-01-01

    Art objects are often unique reflections of a culture. Procedures are described for having intermediate or secondary level students make a parfleche, a form of carrying case used by the Plains Indians. Materials for making the parfleche include two large grocery bags, pencil, white glue, wax crayons, string, and water. (RM)

  18. Testing of Replacement Bag Material

    SciTech Connect

    Laurinat, J.E.

    1998-11-03

    Recently, the FB-Line bagout material was changed to simplify the processing of sand, slag, and crucible.The results of the strength tests and the outgassing measurements and calculations demonstrate that the proposed replacement nylon bag materials (HRMP and orange anti-static material) are acceptable substitutes for LDPE and the original nylon with respect to mechanical properties.

  19. 7 CFR 201.41 - Bags.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Sampling in the Administration of the Act § 201.41 Bags. (a) For lots of six bags or fewer, each bag shall be sampled. A total of at least five trierfuls shall be taken. (b) For lots of more than six...

  20. 21 CFR 868.5320 - Reservoir bag.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Reservoir bag. 868.5320 Section 868.5320 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5320 Reservoir bag. (a) Identification. A reservoir bag is...

  1. 21 CFR 868.5320 - Reservoir bag.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Reservoir bag. 868.5320 Section 868.5320 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5320 Reservoir bag. (a) Identification. A reservoir bag is...

  2. 21 CFR 868.5320 - Reservoir bag.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Reservoir bag. 868.5320 Section 868.5320 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5320 Reservoir bag. (a) Identification. A reservoir bag is...

  3. 21 CFR 868.5320 - Reservoir bag.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Reservoir bag. 868.5320 Section 868.5320 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5320 Reservoir bag. (a) Identification. A reservoir bag is...

  4. 21 CFR 868.5320 - Reservoir bag.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Reservoir bag. 868.5320 Section 868.5320 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5320 Reservoir bag. (a) Identification. A reservoir bag is...

  5. CUT BACK YOUR LOSSES IN BAG SILOS

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Bag silos have grown in popularity among dairy producers. However, there has not been much information on density and losses in such silos. In a survey of bag silos made at three research farms, we found that density was most affected by dry matter content, particle size and bagging machine setup. D...

  6. Improved prediction of parachute line sail during lines-first deployment

    SciTech Connect

    Purvis, J.W.

    1984-04-01

    A numerical deployment simulation with the capability to predict line sail is presented. A finite element approach is used in which both canopy and suspension lines are modeled as flexible, distributed-mass structures connected to a finite-mass forebody. Translation and rotation of both the forebody and the deployment bag are determined from three-degree-of-freedom flight mechanics equations. The model includes all aspects of the deployment problem, such as suspension line aerodynamics, line ties, and canopy/deployment bag friction. The model has been verified by comparison with experimental data and used to investigate proposed solutions for a system with a line sail problem.

  7. Bag-breakup control of surface drag in hurricanes

    NASA Astrophysics Data System (ADS)

    Troitskaya, Yuliya; Zilitinkevich, Sergej; Kandaurov, Alexander; Ermakova, Olga; Kozlov, Dmitry; Sergeev, Daniil

    2016-04-01

    Air-sea interaction at extreme winds is of special interest now in connection with the problem of the sea surface drag reduction at the wind speed exceeding 30-35 m/s. This phenomenon predicted by Emanuel (1995) and confirmed by a number of field (e.g., Powell, et al, 2003) and laboratory (Donelan et al, 2004) experiments still waits its physical explanation. Several papers attributed the drag reduction to spume droplets - spray turning off the crests of breaking waves (e.g., Kudryavtsev, Makin, 2011, Bao, et al, 2011). The fluxes associated with the spray are determined by the rate of droplet production at the surface quantified by the sea spray generation function (SSGF), defined as the number of spray particles of radius r produced from the unit area of water surface in unit time. However, the mechanism of spume droplets' formation is unknown and empirical estimates of SSGF varied over six orders of magnitude; therefore, the production rate of large sea spray droplets is not adequately described and there are significant uncertainties in estimations of exchange processes in hurricanes. Herewith, it is unknown what is air-sea interface and how water is fragmented to spray at hurricane wind. Using high-speed video, we observed mechanisms of production of spume droplets at strong winds by high-speed video filming, investigated statistics and compared their efficiency. Experiments showed, that the generation of the spume droplets near the wave crest is caused by the following events: bursting of submerged bubbles, generation and breakup of "projections" and "bag breakup". Statistical analysis of results of these experiments showed that the main mechanism of spray-generation is attributed to "bag-breakup mechanism", namely, inflating and consequent blowing of short-lived, sail-like pieces of the water-surface film. Using high-speed video, we show that at hurricane winds the main mechanism of spray production is attributed to "bag-breakup", namely, inflating and

  8. Improved material-bagging device

    DOEpatents

    Wach, C.G.; Nelson, R.E.; Brak, S.B.

    1982-01-19

    A bagging device for transferring material; specifically contaminated material, from one chamber through an opening in a wall to a second chamber includes a cylindrical housing communicating with the opening and defining a passage between the chambers. A cylindrical cartridge is slidably received within the housing. The cartridge has a substantially rigid cylindrical sleeve to which is affixed a pliable tube. The pliable tube is positioned concentrically about the sleeve and has a pleated portion capable of unfolding from the sleeve and a closed end extending over a terminal end of the sleeve. Sealing means are interposed in sealed relationship between the cartridge and the housing. Material from one chamber is inserted into the cartridge secured in the housing and received in the closed end of the tube which unfolds into the other chamber enclosing the material therein. The tube may then be sealed behind the material and then severed to form a bag-like enclosure defined by the tube's closed terminal end and the new seal. The new seal then forms a terminal end for the unsevered portion of the pliable tube into which additional material may be placed and the bagging process repeated.

  9. Ergonomics and safety of manual bag sealing.

    PubMed

    de Groot, Marinka D; Bosch, Tim; Eikhout, Sandra M; Vink, Peter

    2005-01-01

    A variety of seals is used to close bags. Each seal has advantages and disadvantages. For shop assistants sealing bags could be a repetitive physically demanding action. Opening and closing the bags again can cause some discomfort or annoyance for consumers. Besides, it is an activity which can endanger safety, i.e., knives being used in opening, children swallowing the systems of sealing. To prevent these problems a new sealing system was developed. In this paper the opinion of shop assistants, consumers and experts on several bag sealing systems was studied. It appeared that for sealing plastic bags, adhesive tape with paper is the best out of 4 systems, closely followed by adhesive tape. It is discussed that for the elderly, there is still room for improvement in opening bag seals. PMID:16219161

  10. 21 CFR 880.6050 - Ice bag.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ....6050 Ice bag. (a) Identification. An ice bag is a device intended for medical purposes that is in the form of a container intended to be filled with ice that is used to apply dry cold therapy to an area of... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Ice bag. 880.6050 Section 880.6050 Food and...

  11. 21 CFR 880.6050 - Ice bag.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ....6050 Ice bag. (a) Identification. An ice bag is a device intended for medical purposes that is in the form of a container intended to be filled with ice that is used to apply dry cold therapy to an area of... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Ice bag. 880.6050 Section 880.6050 Food and...

  12. 21 CFR 880.6050 - Ice bag.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ....6050 Ice bag. (a) Identification. An ice bag is a device intended for medical purposes that is in the form of a container intended to be filled with ice that is used to apply dry cold therapy to an area of... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Ice bag. 880.6050 Section 880.6050 Food and...

  13. 21 CFR 880.6050 - Ice bag.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ....6050 Ice bag. (a) Identification. An ice bag is a device intended for medical purposes that is in the form of a container intended to be filled with ice that is used to apply dry cold therapy to an area of... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Ice bag. 880.6050 Section 880.6050 Food and...

  14. Bag For Formulating And Dispersing Intravenous Solution

    NASA Technical Reports Server (NTRS)

    Kipp, Jim; Owens, Jim; Scharf, Mike; Finley, Mike; Dudar, Tom; Veillon, Joe; Ogle, Jim

    1993-01-01

    Large-volume parenteral (LVP) bag in which predetermined amount of sterile solution formulated by combining premeasured, prepackaged amount of sterile solute with predetermined amount of water. Bag designed to hold predetermined amount, typically 1 L, of sterile solution. Sterility of solution maintained during mixing by passing water into bag through sterilizing filter. System used in field or hospitals not having proper sterile facilities, and in field research.

  15. 21 CFR 880.6050 - Ice bag.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ....6050 Ice bag. (a) Identification. An ice bag is a device intended for medical purposes that is in the form of a container intended to be filled with ice that is used to apply dry cold therapy to an area of... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ice bag. 880.6050 Section 880.6050 Food and...

  16. Air

    MedlinePlus

    ... do to protect yourself from dirty air . Indoor air pollution and outdoor air pollution Air can be polluted indoors and it can ... this chart to see what things cause indoor air pollution and what things cause outdoor air pollution! Indoor ...

  17. Bagging system, soil stabilization mat, and tent frame for a lunar base

    NASA Technical Reports Server (NTRS)

    1990-01-01

    Georgia Tech's School of Textile and Fiber Engineering and School of Mechanical Engineering participated in four cooperative design efforts this year. Each of two interdisciplinary teams designed a system consisting of a lunar regolith bag and an apparatus for filling this bag. The third group designed a mat for stabilization of lunar soil during takeoff and landing, and a method for packaging and deploying this mat. Finally, the fourth group designed a sunlight diffusing tent to be used as a lunar worksite. Summaries of these projects are given.

  18. Comparison of storage stability of odorous VOCs in polyester aluminum and polyvinyl fluoride Tedlar® bags.

    PubMed

    Kim, Yong-Hyun; Kim, Ki-Hyun; Jo, Sang-Hee; Jeon, Eui-Chan; Sohn, Jong Ryeul; Parker, David B

    2012-01-27

    Whole air sampling using containers such as flexible bags or rigid canisters is commonly used to collect samples of volatile organic compounds (VOC) in air. The objective of this study was to compare the stability of polyester aluminum (PEA) and polyvinyl fluoride (PVF, brand name Tedlar(®)) bags for gaseous VOC sampling. Eight VOC standards (benzene, toluene, p-xylene, styrene, methyl ethyl ketone, methyl isobutyl ketone, butyl acetate, and isobutyl alcohol) were placed into each bag at storage times of 0, 2, and 3 days prior to analyses by gas chromatography/mass spectrometry (GC/MS). From each bag representing each storage day, samples of 3 different mass loadings were withdrawn and analyzed to derive response factors (RF) of each chemical between the slope of the GC response (y-axis) vs. loaded mass (x-axis). The relative recoveries (RR) of VOC, if derived by dividing RF value of a given storage day by that of 0 day, varied by time, bag type, and VOC type. If the RR values after three days are compared, those of methyl isobutyl ketone were the highest with 96 (PVF) and 99% (PEA); however, the results of isobutyl alcohol were highly contrasting between the two bags with 31 and 94%, respectively. Differences in RR values between the two bag types increased with storage time, such that RR of PEA bags (88±10%) were superior to those of PVF bags (73±22%) after three days, demonstrating that VOC in PEA bags were more stable than in PVF bags. PMID:22177080

  19. GPM Solar Array Gravity Negated Deployment Testing

    NASA Technical Reports Server (NTRS)

    Penn, Jonathan; Johnson, Chris; Lewis, Jesse; Dear, Trevin; Stewart, Alphonso

    2014-01-01

    NASA Goddard Space Flight Center (GSFC) successfully developed a g-negation support system for use on the solar arrays of the Global Precipitation Measurement (GPM) Satellite. This system provides full deployment capability at the subsystem and observatory levels. In addition, the system provides capability for deployed configuration first mode frequency verification testing. The system consists of air pads, a support structure, an air supply, and support tables. The g-negation support system was used to support all deployment activities for flight solar array deployment testing.

  20. 15 CFR 740.14 - Baggage (BAG).

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 15 Commerce and Foreign Trade 2 2011-01-01 2011-01-01 false Baggage (BAG). 740.14 Section 740.14 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE EXPORT ADMINISTRATION REGULATIONS LICENSE EXCEPTIONS § 740.14 Baggage (BAG). (a) Scope. This...

  1. 21 CFR 878.4100 - Organ bag.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Organ bag. 878.4100 Section 878.4100 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES GENERAL AND PLASTIC SURGERY DEVICES Surgical Devices § 878.4100 Organ bag. (a) Identification. An...

  2. 21 CFR 878.4100 - Organ bag.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Organ bag. 878.4100 Section 878.4100 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES GENERAL AND PLASTIC SURGERY DEVICES Surgical Devices § 878.4100 Organ bag. (a) Identification. An...

  3. 21 CFR 878.4100 - Organ bag.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Organ bag. 878.4100 Section 878.4100 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES GENERAL AND PLASTIC SURGERY DEVICES Surgical Devices § 878.4100 Organ bag. (a) Identification. An...

  4. 15 CFR 740.14 - Baggage (BAG).

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 15 Commerce and Foreign Trade 2 2012-01-01 2012-01-01 false Baggage (BAG). 740.14 Section 740.14 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE EXPORT ADMINISTRATION REGULATIONS LICENSE EXCEPTIONS § 740.14 Baggage (BAG). (a) Scope. This...

  5. 21 CFR 878.4100 - Organ bag.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Organ bag. 878.4100 Section 878.4100 Food and... GENERAL AND PLASTIC SURGERY DEVICES Surgical Devices § 878.4100 Organ bag. (a) Identification. An organ... organ during surgical procedures to prevent moisture loss. (b) Classification. Class I (general...

  6. 21 CFR 878.4100 - Organ bag.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Organ bag. 878.4100 Section 878.4100 Food and... GENERAL AND PLASTIC SURGERY DEVICES Surgical Devices § 878.4100 Organ bag. (a) Identification. An organ... organ during surgical procedures to prevent moisture loss. (b) Classification. Class I (general...

  7. Cold temperature disinfestation of bagged flour

    Technology Transfer Automated Retrieval System (TEKTRAN)

    We conducted studies using a commercial freezer maintained at -17.8°C to determine the time needed to kill Tribolium castaneum eggs in a pallet of flour. Each bag weighed 22.7 kg, and there were 5 bags in each of 10 layers. The dimensions of the pallet were 109-cm wide by 132-cm long by 123-cm tall,...

  8. Water bag modeling of a multispecies plasma

    SciTech Connect

    Morel, P.; Gravier, E.; Besse, N.; Klein, R.; Ghizzo, A.; Bertrand, P.; Bourdelle, C.; Garbet, X.

    2011-03-15

    We report in the present paper a new modeling method to study multiple species dynamics in magnetized plasmas. Such a method is based on the gyrowater bag modeling, which consists in using a multistep-like distribution function along the velocity direction parallel to the magnetic field. The choice of a water bag representation allows an elegant link between kinetic and fluid descriptions of a plasma. The gyrowater bag model has been recently adapted to the context of strongly magnetized plasmas. We present its extension to the case of multi ion species magnetized plasmas: each ion species being modeled via a multiwater bag distribution function. The water bag modelization will be discussed in details, under the simplification of a cylindrical geometry that is convenient for linear plasma devices. As an illustration, results obtained in the linear framework for ion temperature gradient instabilities are presented, that are shown to agree qualitatively with older works.

  9. [Effect of bagging on greenhouse cucumber].

    PubMed

    Chen, Zhijie; Zhang, Shulian; Liang, Yinli; Zhang, Feng; Xu, Fuli; Quan, Qingzhuan

    2004-07-01

    The study showed that culturing cucumber with film bag increased cucumber yield by 12.3% - 15.1%, reduced abnormal cucumber by 65.3% - 72.8%, and the shape of cucumber was straight and smooth. The keeping-fresh period of the cucumber prolonged to 20 - 25 days, its vitamin C increased 21.9%, and total sugar increased to 5.1%. Paper bagging increased cucumber yield by 7.2% - 10.1%, and reduced abnormal cucumber by 52.2% - 57.7%. Bag body could efficiently prevent the cucumber from the direct pollution of chemicals spray. The survival pesticides in film and paper bags was 0.760 mg x kg(-1) and 1.2208 mg x kg(-1), reduced by 83.3% and 73.2%, respectively, compared to non-bagging. PMID:15506119

  10. Unit-Dose Bags For Formulating Intravenous Solutions

    NASA Technical Reports Server (NTRS)

    Finley, Mike; Kipp, Jim; Scharf, Mike; Packard, Jeff; Owens, Jim

    1993-01-01

    Smaller unit-dose flowthrough bags devised for use with large-volume parenteral (LVP) bags in preparing sterile intravenous solutions. Premeasured amount of solute stored in such unit-dose bag flushed by predetermined amount of water into LVP bag. Relatively small number of LVP bags used in conjunction with smaller unit-dose bags to formulate large number of LVP intravenous solutions in nonsterile environment.

  11. Workplace Exposure to Titanium Dioxide Nanopowder Released from a Bag Filter System

    PubMed Central

    Ji, Jun Ho; Kim, Jong Bum; Lee, Gwangjae; Noh, Jung-Hun; Yook, Se-Jin; Cho, So-Hye; Bae, Gwi-Nam

    2015-01-01

    Many researchers who use laboratory-scale synthesis systems to manufacture nanomaterials could be easily exposed to airborne nanomaterials during the research and development stage. This study used various real-time aerosol detectors to investigate the presence of nanoaerosols in a laboratory used to manufacture titanium dioxide (TiO2). The TiO2 nanopowders were produced via flame synthesis and collected by a bag filter system for subsequent harvesting. Highly concentrated nanopowders were released from the outlet of the bag filter system into the laboratory. The fractional particle collection efficiency of the bag filter system was only 20% at particle diameter of 100 nm, which is much lower than the performance of a high-efficiency particulate air (HEPA) filter. Furthermore, the laboratory hood system was inadequate to fully exhaust the air discharged from the bag filter system. Unbalanced air flow rates between bag filter and laboratory hood systems could result in high exposure to nanopowder in laboratory settings. Finally, we simulated behavior of nanopowders released in the laboratory using computational fluid dynamics (CFD). PMID:26125024

  12. Workplace Exposure to Titanium Dioxide Nanopowder Released from a Bag Filter System.

    PubMed

    Ji, Jun Ho; Kim, Jong Bum; Lee, Gwangjae; Noh, Jung-Hun; Yook, Se-Jin; Cho, So-Hye; Bae, Gwi-Nam

    2015-01-01

    Many researchers who use laboratory-scale synthesis systems to manufacture nanomaterials could be easily exposed to airborne nanomaterials during the research and development stage. This study used various real-time aerosol detectors to investigate the presence of nanoaerosols in a laboratory used to manufacture titanium dioxide (TiO2). The TiO2 nanopowders were produced via flame synthesis and collected by a bag filter system for subsequent harvesting. Highly concentrated nanopowders were released from the outlet of the bag filter system into the laboratory. The fractional particle collection efficiency of the bag filter system was only 20% at particle diameter of 100 nm, which is much lower than the performance of a high-efficiency particulate air (HEPA) filter. Furthermore, the laboratory hood system was inadequate to fully exhaust the air discharged from the bag filter system. Unbalanced air flow rates between bag filter and laboratory hood systems could result in high exposure to nanopowder in laboratory settings. Finally, we simulated behavior of nanopowders released in the laboratory using computational fluid dynamics (CFD). PMID:26125024

  13. Insulin binding to plastic bags: a methodologic study.

    PubMed

    Twardowski, Z J; Nolph, K D; McGary, T J; Moore, H L; Collin, P; Ausman, R K; Slimack, W S

    1983-04-01

    A radiotracer method to assess insulin binding to commercially available plastic peritoneal dialysis solution containers was developed. A peritoneal dialysis bag (bag 2) was emptied and attached to another full bag (bag 1) of the same kind. In the syringe-to-bag method, bag 1 was symmetrically injected through the bag wall with four syringes containing dialysis solution and radioactive insulin, with or without regular insulin. The radioactivity in each syringe was measured with a gamma counter before injection, and all of the samples were counted afterwards directly in the syringes. Using a bag-to-bag transfer method, bag 1 was agitated, eight samples were taken from different parts through the wall, and then the contents were transferred to bag 2. Bag 2 was then agitated and eight samples were taken and counted. In the bag-pieces method, pieces of bag wall were cut and the radioactivity on the walls was measured to determine the amount of binding. The syringe-to-bag method gave negative results, severely underestimating the amount of insulin binding. The bag-to-bag transfer method yielded positive results in all instances. Increasing the amounts of regular insulin had no demonstrable impact on percent of binding. When the bag-to-bag method was compared with the bag-pieces method, it gave only slightly higher values; however, the bag-to-bag method was considered more reliable because the counting can be controlled more effectively. A 15-minute delay in sampling was not found to influence insulin binding. A reliable method of assessing insulin binding must be based on the following two principles: (1) The transfer of samples to intermediate containers should be avoided, and (2) radiotracer concentrations in the samples should be similar. PMID:6342377

  14. Prediction of particulate loading in exhaust from fabric filter baghouses with one or more failed bags

    SciTech Connect

    Wenjun Qin; Manuel Dekermenjian; Richard J. Martin

    2006-08-15

    Loss of filtration efficiency in a fabric filter baghouse is typically caused by bag failure, in one form or another. The degree of such failure can be as minor as a pinhole leak or as major as a fully involved baghouse fire. In some cases, local air pollution regulations or federal hazardous waste laws may require estimation of the total quantity of particulate matter released to the environment as a result of such failures. In this paper, a technique is presented for computing the dust loading in the baghouse exhaust when one or more bags have failed. The algorithm developed is shown to be an improvement over a previously published result, which requires empirical knowledge of the variation in baghouse pressure differential with bag failures. An example calculation is presented for a baghouse equipped with 200 bags. The prediction shows that a small percentage of failed bags can cause a relatively large proportion of the gas flow to bypass the active bags, which, in turn, leads to high outlet dust loading and low overall collection efficiency from the baghouse. 10 refs., 5 figs., 3 tabs.

  15. Cooler Deployment, GOES J on ATLAS

    NASA Technical Reports Server (NTRS)

    1995-01-01

    This NASA Kennedy Space Center video release presents footage of workcrews overseeing the cooler deployment on the GOES-J weather satellite that will be launched on the Atlas Centaur rocket from Complex 36 at the Cape Canaveral Air Station.

  16. Deployment simulation for 3rd generation solar array GSR3

    NASA Astrophysics Data System (ADS)

    Verne, C.; Rouchon, M.

    1989-01-01

    Deployment tests for different solar arrays are described. The Spacebus solar array deployment is tested in two dimensions. The Spot 4 array deployment is tested in three dimensions. A mock-up deployment test on an air cushion is compared to results obtained using simulation software. The third generation solar array concept equipped with Adele hinges is compared to previous solar array models. The need for greater accuracy and reliability in the deployment analysis of these third generation solar arrays is stressed.

  17. Enhancing Mathematical Communication: "Bag of Tricks" Game

    ERIC Educational Resources Information Center

    Patahuddin, Sitti Maesuri; Ramful, Ajay; Greenlees, Jane

    2015-01-01

    An engaging activity which prompts students to listen, talk, reason and write about geometrical properties. The "Bag of Tricks" encourages students to clarify their thoughts and communicate precisely using accurate mathematical language.

  18. File System Support for Digital Evidence Bags

    NASA Astrophysics Data System (ADS)

    Richard, Golden; Roussev, Vassil

    Digital Evidence Bags (DEBs) are a mechanism for bundling digital evidence, associated metadata and audit logs into a single structure. DEB-compliant applications can update a DEB's audit log as evidence is introduced into the bag and as data in the bag is processed. This paper investigates native file system support for DEBs, which has a number of benefits over ad hoc modification of digital evidence bags. The paper also describes an API for DEB-enabled applications and methods for providing DEB access to legacy applications through a DEB-aware file system. The paper addresses an urgent need for digital-forensics-aware operating system components that can enhance the consistency, security and performance of investigations.

  19. 49 CFR 178.519 - Standards for plastic film bags.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Standards for plastic film bags. 178.519 Section...-bulk Performance-Oriented Packaging Standards § 178.519 Standards for plastic film bags. (a) The identification code for a plastic film bag is 5H4. (b) Construction requirements for plastic film bags are...

  20. 49 CFR 178.519 - Standards for plastic film bags.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Standards for plastic film bags. 178.519 Section...-bulk Performance-Oriented Packaging Standards § 178.519 Standards for plastic film bags. (a) The identification code for a plastic film bag is 5H4. (b) Construction requirements for plastic film bags are...

  1. 49 CFR 178.519 - Standards for plastic film bags.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Standards for plastic film bags. 178.519 Section...-bulk Performance-Oriented Packaging Standards § 178.519 Standards for plastic film bags. (a) The identification code for a plastic film bag is 5H4. (b) Construction requirements for plastic film bags are...

  2. 49 CFR 178.519 - Standards for plastic film bags.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Standards for plastic film bags. 178.519 Section...-bulk Performance-Oriented Packaging Standards § 178.519 Standards for plastic film bags. (a) The identification code for a plastic film bag is 5H4. (b) Construction requirements for plastic film bags are...

  3. 49 CFR 178.520 - Standards for textile bags.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Standards for textile bags. 178.520 Section 178... PACKAGINGS Non-bulk Performance-Oriented Packaging Standards § 178.520 Standards for textile bags. (a) The following are identification codes for textile bags: (1) 5L1 for an unlined or non-coated textile bag;...

  4. 42 CFR 84.85 - Breathing bags; minimum requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Breathing bags; minimum requirements. 84.85 Section...-Contained Breathing Apparatus § 84.85 Breathing bags; minimum requirements. (a) Breathing bags shall have.... (b) Breathing bags shall be constructed of materials which are flexible and resistant to...

  5. Bag-out material handling system

    DOEpatents

    Brak, Stephen B.; Milek, Henry F.

    1984-01-01

    A bagging device for transferring material from a first chamber through an pening in a wall to a second chamber includes an outer housing communicating with the opening and having proximal and distal ends relative to the wall. An inner housing having proximal and distal ends corresponding to those of the outer housing is mounted in a concentrically spaced, sealed manner with respect to the distal end of the outer housing. The inner and outer housings and mounting means therebetween define an annular chamber, closed at its distal end and open at its proximal end, in which a pliable tube is slidably positioned in sealed engagement with the housings. The pliable tube includes a sealed end positioned adjacent the proximal end of the inner housing so as to maintain isolation between the first and second chambers. Displacement of the material to be bagged from the first chamber along the inner housing so as to contact the sealed portion of the pliable bag allows the material to be positioned within the pliable bag in the second chamber. The bag is then sealed and severed between where the material is positioned therein and the wall in providing a sealed container for handling the material. The pliable tube when substantially depleted slides onto a narrow portion of the inner housing to allow a new pliable tube to be positioned over the old pliable tube. Remnants of the old pliable tube are then discharged into the new pliable tube with the bagging and removal of additional material.

  6. Bag-out material handling system

    DOEpatents

    Brak, Stephen B.

    1985-01-01

    A bagging device for transferring material from a first chamber through an opening in a wall to a second chamber includes an outer housing communicating with the opening and having proximal and distal ends relative to the wall. An inner housing having proximal and distal ends corresponding to those of the outer housing is mounted in a concentrically spaced, sealed manner with respect to the distal end of the outer housing. The inner and outer housings and mounting means therebetween define an annular chamber, closed at its distal end and open at its proximal end, in which a pliable tube is slidably positioned in sealed engagement with the housings. The pliable tube includes a sealed end positioned adjacent the proximal end of the inner housing so as to maintain isolation between the first and second chambers. Displacement of the material to be bagged from the first chamber along the inner housing so as to contact the sealed portion of the pliable bag allows the material to be positioned within the pliable bag in the second chamber. The bag is then sealed and severed between where the material is positioned therein and the wall in providing a sealed container for handling the material. The pliable tube when substantially depleted slides onto a narrow portion of the inner housing to allow a new pliable tube to be positioned over the old pliable tube. Remnants of the old pliable tube are then discharged into the new pliable tube with the bagging and removal of additional material.

  7. ASBESTOS FIBER RELEASE DURING CHANGE-OUT OF FILTER BAGS FROM HEPA-FILTERED VACUUM CLEANERS

    EPA Science Inventory

    High efficiency particulate air (HEPA) filtered vacuum cleaners are the primary tool used to clean up asbestos containing material during operations and maintenance (O&M) activities. he change-out of vacuum bags is a potential source of airborne asbestos contamination. n 1989 and...

  8. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: PAINT OVERSPRAY ARRESTOR, COLUMBUS INDUSTRIES, INC., SL-90B 8 POCKET BAG

    EPA Science Inventory

    The report gives results of March 23-24, 1999, tests of Columbus Industries Inc's SL-90B 8 Pocket Bag paint overspray arrestor (POA) as part of an evaluation of POAs by EPA's Air Pollution Control Technology (APCT) Environmental Technology Verification (ETV) Program. The basic pe...

  9. ENVIRONMENTAL TECHNOLOGY VERIFICATION PROGRAM REPORT: PAINT OVERSPRAY ARRESTOR, ATI A-3000 5P BAG

    EPA Science Inventory

    The report gives results of March 24-25, 1999, tests of ATI's A-3000 5P Bag paint overspray arrestor (POA) as part of an evaluation of POAs by EPA's Air Pollution Control Technology (APCT) Environmental Technology Verification (ETV) Program. The basic performance factor being ver...

  10. Vacuum energy in the bag model

    NASA Astrophysics Data System (ADS)

    Candelas, P.

    1986-04-01

    The vacuum energy of the Yang-Mills field is examined for the conditions of the bag model. The dominance of high-frequency effects results in a vacuum energy that decomposes naturally into a volume energy, a surface energy, and higher shape energies. These quantities are identified with the parameters of the bag model. The imposition of confining boundary conditions for all frequencies is shown to be inconsistent since this would result in the bag constant and certain of the shape tensions being infinite. The manner in which the boundary conditions should be relaxed at high frequency is discussed. The most naive procedure for relaxing the boundary conditions, which is to apply confining conditions only on modes of frequency less than some cutoff frequency, results in a negative bag constant and surface tension and would render the vacuum unstable against the spontaneous breaking of Poincaré invariance. Consideration of the manner by which the interacting electromagnetic field avoids a similar instability suggests that a more realistic way to relax the boundary conditions on the bag surface is to endow the vacuum exterior to the bag with a frequency-dependent dielectric constant and magnetic permeability. In this picture the stability of the vacuum is restored, the surface tension is finite and positive, and the bag constant is zero at least to lowest order in the coupling. It is pointed out that the fermion contributions to the bag constant and the surface tension may relate to the spontaneous breaking of chiral invariance. The aim throughout is to examine the bag model, as it relates to vacuum energy, strictly in its own terms with an emphasis on questions of principle. All too often is heard the alibi that since the theory itself is only approximate, the mathematics need be no better. In truth the opposite follows. Granted that the model represents but a part of nature, we are to find what such an ideal picture implies, a result strictly derived serves to test

  11. Contained Morcellation for Laparoscopic Myomectomy Within a Specially Designed Bag.

    PubMed

    Paul, P G; Thomas, Manju; Das, Tanuka; Patil, Saurabh; Garg, Reena

    2016-02-01

    A technique of contained morcellation of uterine myomas within a bag specially designed for 2-port morcellation during laparoscopic myomectomy is described. Ten patients underwent in-bag morcellation of myomas with a tissue isolation bag (MorSafe) between November 2014 and January 2015. The MorSafe tissue isolation bag is a retort-shaped bag made of medical-grade flexible plastic material with the wider opening of 134 mm in diameter and the tail end measuring 4 mm in diameter, allowing easy accomodation of specimens up to 12 cm in diameter. This technique involves placing the myomas into the isolation bag within the abdomen, exteriorizing the tail end of the bag, insufflating the bag within the peritoneal cavity, and morcellating the myomas under vision. Demographic and perioperative characteristics were studied. The mean operative time was 117 minutes (range, 75-195 minutes), the mean time for specimen introduction into the bag was 12.5 minutes (range, 7-22 minutes), and the mean time for morcellation and bag removal was 24.8 minutes (range, 10-50 minutes). There were no complications related to the in-bag morcellation technique, and there was no visual evidence of damage to the isolation bag. In-bag morcellation using this new bag is a feasible technique for morcellating uterine myomas in a contained manner and may provide an option to minimize the risks of open power morcellation while preserving the benefits of minimally invasive surgery. PMID:26260302

  12. Purple Urine Bag Syndrome- An Alarming Situation

    PubMed Central

    Faridi, M S; Mibang, Naloh; Shantajit, N; Somarendra, Khumukchum

    2016-01-01

    Purple urine bag syndrome (PUBS) is an uncommon condition that occurs mainly in chronically catheterized patient and associated with urinary tract infection. It is characterised by purple discolouration of urine bag which leads to significant stress and anxiety to patient, care takers and health workers, so awareness regarding this condition is of utmost importance. In our report, an old gentleman with Benign Prostate Hyperplasia (BPH) on per urethral catheter (PUC) with past history of recurrent urinary tract infection developed burning micturition of urine with purple discoloration of urine bag. After proper antibiotic and catheter changed, discoloration subsided. In India, as life expectancy and geriatric care is improving, more patients are on PUC for various diseases. So, the incidence of PUBS will increase and awareness is required about the condition and its management. PMID:27042522

  13. Recognizing purple bag syndrome at first look.

    PubMed

    Canavese, Caterina; Airoldi, Andrea; Quaglia, Marco; Barbè, Maria Cristina; Brustia, Maddalena; Vidali, Matteo; Bagnati, Marco; Andreone, Stefano; Corrà, Tjibbo; Sciarrabba, Calogera; Bellomo, Giorgio; Stratta, Piero

    2013-01-01

    Purple urine bag syndrome is a clinical entity first described in 1978. Its typical discoloration is worrying for clinicians. In the past, these patients sometimes reached the emergency unit only because of this exceptional worrying urinary sign and underwent invasive diagnostic examinations including cystoscopy, without any abnormal finding. It is now clear that this astonishing phenomenon of double discoloration of the urine, appearing purple in the bag and dark blue in the test tube, results from the formation of 2 different pigments (indirubin and indigo) in very alkaline urines due to enzymes produced by gram-negative bacteria, such as indoxyl phosphatase/sulfatase, which can convert urinary metabolites of dietary tryptophan. Practicing physicians should identify purple urine bag syndrome as a usually benign medical condition diagnosed in asymptomatic patients, which only requires treatment of bacteriuria with antibiotics, prevention of constipation, substitution of catheter and acidification of the urine. After these measures, urine typically returns to its normal color. PMID:22941873

  14. Solid and Liquid Waste Drying Bag

    NASA Technical Reports Server (NTRS)

    Litwiller, Eric (Inventor); Hogan, John A. (Inventor); Fisher, John W. (Inventor)

    2009-01-01

    Method and system for processing waste from human activities, including solids, liquids and vapors. A fluid-impermeable bag, lined with a liquid-impermeable but vapor-permeable membrane, defining an inner bag, is provided. A vacuum force is provided to extract vapors so that the waste is moved toward a selected region in the inner bag, extracted vapors, including the waste vapors and vaporized portions of the waste liquids are transported across the membrane, and most or all of the solids remain within the liner. Extracted vapors are filtered, and sanitized components thereof are isolated and optionally stored. The solids remaining within the liner are optionally dried and isolated for ultimate disposal.

  15. Purple Urine Bag Syndrome- An Alarming Situation.

    PubMed

    Faridi, M S; Rahman, Md Jawaid; Mibang, Naloh; Shantajit, N; Somarendra, Khumukchum

    2016-02-01

    Purple urine bag syndrome (PUBS) is an uncommon condition that occurs mainly in chronically catheterized patient and associated with urinary tract infection. It is characterised by purple discolouration of urine bag which leads to significant stress and anxiety to patient, care takers and health workers, so awareness regarding this condition is of utmost importance. In our report, an old gentleman with Benign Prostate Hyperplasia (BPH) on per urethral catheter (PUC) with past history of recurrent urinary tract infection developed burning micturition of urine with purple discoloration of urine bag. After proper antibiotic and catheter changed, discoloration subsided. In India, as life expectancy and geriatric care is improving, more patients are on PUC for various diseases. So, the incidence of PUBS will increase and awareness is required about the condition and its management. PMID:27042522

  16. Best options for the exposure of traditional and innovative moss bags: A systematic evaluation in three European countries.

    PubMed

    Capozzi, F; Giordano, S; Aboal, J R; Adamo, P; Bargagli, R; Boquete, T; Di Palma, A; Real, C; Reski, R; Spagnuolo, V; Steinbauer, K; Tretiach, M; Varela, Z; Zechmeister, H; Fernández, J A

    2016-07-01

    To develop an internationally standardized protocol for the moss bag technique application, the research team participating in the FP7 European project "MOSSclone" focused on the optimization of the moss bags exposure in terms of bag characteristics (shape of the bags, mesh size, weight/surface ratio), duration and height of exposure by comparing traditional moss bags to a new concept bag, "Mossphere". In particular, the effects of each variable on the metal uptake from the air were evaluated by a systematic experimental design carried out in urban, industrial, agricultural and background areas of three European countries with oceanic, Mediterranean and continental climate. The results evidenced that the shape, the mesh size of the bags and the exposure height (in the tested ranges), did not significantly influence the uptake capacity of the transplanted moss. The aspects more affecting the element uptake were represented by the density of the moss inside the bags and the relative ratio between its weight and the surface area of the bag. We found that, the lower the density, the higher the uptake recorded. Moreover, three weeks of exposure were not enough to have a consistent uptake signal in all the environments tested, thus we suggest an exposure period not shorter than 6 weeks, which is appropriate in most situations. The above results were confirmed in all the countries and scenarios tested. The adoption of a shared exposure protocol by the research community is strongly recommended since it is a key aspect to make biomonitoring surveys directly comparable, also in view of its recognition as a monitoring method by the EU legislation. PMID:27108040

  17. 13. BUILDING NO. 445, PHYSICS LAB (FORMERLY GUN BAG LOADING), ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. BUILDING NO. 445, PHYSICS LAB (FORMERLY GUN BAG LOADING), VIEW NORTH AT SOUTH END OF BUILDING. - Picatinny Arsenal, 400 Area, Gun Bag Loading District, State Route 15 near I-80, Dover, Morris County, NJ

  18. Compact assembly generates plastic foam, inflates flotation bag

    NASA Technical Reports Server (NTRS)

    1965-01-01

    Device for generating plastic foam consists of an elastomeric bag and two containers with liquid resin and a liquid catalyst. When the walls of the containers are ruptured the liquids come into contact producing foam which inflates the elastomeric bag.

  19. 41. BUILDING NO. 454, ORDNANCE FACILITY (BAG CHARGE FILLING PLANT), ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    41. BUILDING NO. 454, ORDNANCE FACILITY (BAG CHARGE FILLING PLANT), INTERIOR, SECOND FLOOR, SHOWING CONVEYOR SYSTEM WHICH BROUGHT PROPELLANTS FROM STORAGE MAGAZINE - Picatinny Arsenal, 400 Area, Gun Bag Loading District, State Route 15 near I-80, Dover, Morris County, NJ

  20. Bag Test Measures Leakage From Insulated Pipe

    NASA Technical Reports Server (NTRS)

    Schock, Kent D.; Easter, Barry P.

    1994-01-01

    Test quantifies leakage of gas from pipe even though pipe covered with insulation. Involves use of helium analyzer to measure concentration of helium in impermeable bag around pipe. Test administered after standard soap-solution bubble test indicates presence and general class of leakage.

  1. Excited states in the soliton bag model

    SciTech Connect

    Saly, R.; Sundaresan, M.K.

    1984-02-01

    Numerical analysis of the solutions of the soliton bag model of Friedberg and Lee is performed. The recent analysis of Goldflam and Wilets is extended to include even-parity as well as odd-parity radially excited states. It is shown that the existence of the solutions (especially the odd-parity ones) restrict severely the allowed range of parameters.

  2. Plant Tissue Culture in a Bag.

    ERIC Educational Resources Information Center

    Beck, Mike

    2000-01-01

    Describes the use of an oven bag as a sterile chamber for culture initiation and tissue transfer. Plant tissue culture is an ideal tool for introducing students to plants, cloning, and experimental design. Includes materials, methods, discussion, and conclusion sections. (SAH)

  3. 29. BUILDING NO. 452, ORDNANCE FACILITY (BAG CHARGE FILLING PLANT), ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    29. BUILDING NO. 452, ORDNANCE FACILITY (BAG CHARGE FILLING PLANT), INTERIOR, ROOM 12. SEWING ROOM WHERE BAGS LOADED WITH POWDER WERE SEWN CLOSED. MOTOR FOR SEWING MACHINE LOCATED OUTSIDE OF BUILDING. CLOSED AND UNCLOSED BAGS WERE PASSED THROUGH BINS IN WALL ON EITHER SIDE. ROOM IS SHEATHED WITH GALVANIZED STEEL PAINTED GRAY. - Picatinny Arsenal, 400 Area, Gun Bag Loading District, State Route 15 near I-80, Dover, Morris County, NJ

  4. Plastic bag clip discovered in partial colectomy accompanying proposal for phylogenic plastic bag clip classification

    PubMed Central

    Lehmer, Larisa M; Ragsdale, Bruce D; Daniel, John; Hayashi, Edwin; Kvalstad, Robert

    2011-01-01

    A plastic bag clip was incidentally found anchored in the mucosa of a partial colectomy specimen 2.6 cm proximal to a ruptured diverticulum for which the patient, a mentally retarded, diabetic, 58-year-old man, underwent surgery. Over 20 cases of accidental ingestion of plastic bag clips have been published. Known complications include small bowel perforation, obstruction, dysphagia, gastrointestinal bleeding and colonic impaction. Preoperative diagnosis of plastic clips lodged in the gastrointestinal tract is frustrated due to radiographic translucency. This occult threat could likely be prevented by the design of gastrointestinally safe, plastic-bag-sealing devices. Presented here is a morphologically based classification of bag clips as a possible guide for determining the most hazardous varieties and to aid further discussions of their impact on health. PMID:22679182

  5. Plastic bag clip discovered in partial colectomy accompanying proposal for phylogenic plastic bag clip classification.

    PubMed

    Lehmer, Larisa M; Ragsdale, Bruce D; Daniel, John; Hayashi, Edwin; Kvalstad, Robert

    2011-01-01

    A plastic bag clip was incidentally found anchored in the mucosa of a partial colectomy specimen 2.6 cm proximal to a ruptured diverticulum for which the patient, a mentally retarded, diabetic, 58-year-old man, underwent surgery. Over 20 cases of accidental ingestion of plastic bag clips have been published. Known complications include small bowel perforation, obstruction, dysphagia, gastrointestinal bleeding and colonic impaction. Preoperative diagnosis of plastic clips lodged in the gastrointestinal tract is frustrated due to radiographic translucency. This occult threat could likely be prevented by the design of gastrointestinally safe, plastic-bag-sealing devices. Presented here is a morphologically based classification of bag clips as a possible guide for determining the most hazardous varieties and to aid further discussions of their impact on health. PMID:22679182

  6. An emergency medical bag set for long-range aeromedical transportation.

    PubMed

    Barillo, David J; Renz, Evan; Broger, Kristine; Moak, Brandon; Wright, Gabriel; Holcomb, John B

    2008-01-01

    The global war on terror has created the need for urgent long-range aeromedical transport of severely wounded service members over distances of several thousand miles from Afghanistan or Iraq to the United States. This need is met by specialized medical transport teams such as US Air Force Critical Care Air Transport Teams (CCATT) or by the US Army Burn Flight Team (BFT). Both teams travel with multiple bags or cases of emergency equipment, which are comprehensive but cumbersome. To avoid the need to search multiple bags for equipment or drugs when an in-flight emergency occurs, many CCATT and BFT physicians also carry a personal bag of emergency supplies for rapid access. Over the last year, we have evolved and standardized an emergency equipment bag designed to provide the supplies necessary for initial management of emergencies that occur during flight and ground transport. This or a similar emergency kit would be useful for inter or intrahospital transport of critically ill or injured civilian patients, or for physicians who respond to civil emergencies, such as members of Disaster Medical Assistance Teams. PMID:18522249

  7. 50 CFR 622.277 - Bag and possession limits.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... ATLANTIC Dolphin and Wahoo Fishery Off the Atlantic States § 622.277 Bag and possession limits. Section 622.11(a) provides the general applicability for bag and possession limits. (a) Atlantic dolphin and wahoo. Bag and possession limits are as follows: (1) Dolphin—10, not to exceed 60 per vessel,...

  8. 50 CFR 622.277 - Bag and possession limits.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... ATLANTIC Dolphin and Wahoo Fishery Off the Atlantic States § 622.277 Bag and possession limits. Section 622.11(a) provides the general applicability for bag and possession limits. (a) Atlantic dolphin and wahoo. Bag and possession limits are as follows: (1) Dolphin—10, not to exceed 60 per vessel,...

  9. 49 CFR 178.518 - Standards for woven plastic bags.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Standards for woven plastic bags. 178.518 Section... PACKAGINGS Non-bulk Performance-Oriented Packaging Standards § 178.518 Standards for woven plastic bags. (a) The following are identification codes for woven plastic bags: (1) 5H1 for an unlined or...

  10. 49 CFR 178.518 - Standards for woven plastic bags.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 3 2014-10-01 2014-10-01 false Standards for woven plastic bags. 178.518 Section...-bulk Performance-Oriented Packaging Standards § 178.518 Standards for woven plastic bags. (a) The following are identification codes for woven plastic bags: (1) 5H1 for an unlined or non-coated...

  11. 49 CFR 178.519 - Standards for plastic film bags.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Standards for plastic film bags. 178.519 Section... PACKAGINGS Non-bulk Performance-Oriented Packaging Standards § 178.519 Standards for plastic film bags. (a) The identification code for a plastic film bag is 5H4. (b) Construction requirements for plastic...

  12. 49 CFR 178.518 - Standards for woven plastic bags.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 3 2011-10-01 2011-10-01 false Standards for woven plastic bags. 178.518 Section...-bulk Performance-Oriented Packaging Standards § 178.518 Standards for woven plastic bags. (a) The following are identification codes for woven plastic bags: (1) 5H1 for an unlined or non-coated...

  13. 49 CFR 178.518 - Standards for woven plastic bags.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 3 2012-10-01 2012-10-01 false Standards for woven plastic bags. 178.518 Section...-bulk Performance-Oriented Packaging Standards § 178.518 Standards for woven plastic bags. (a) The following are identification codes for woven plastic bags: (1) 5H1 for an unlined or non-coated...

  14. 49 CFR 178.518 - Standards for woven plastic bags.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Standards for woven plastic bags. 178.518 Section...-bulk Performance-Oriented Packaging Standards § 178.518 Standards for woven plastic bags. (a) The following are identification codes for woven plastic bags: (1) 5H1 for an unlined or non-coated...

  15. 16 CFR 501.3 - Replacement bags for vacuum cleaners.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Replacement bags for vacuum cleaners. 501.3... REQUIREMENTS AND PROHIBITIONS UNDER PART 500 § 501.3 Replacement bags for vacuum cleaners. Replacement bags for vacuum cleaners, packaged and labeled for retail sale are exempt from the requirements of § 500.15a...

  16. 16 CFR 501.3 - Replacement bags for vacuum cleaners.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Replacement bags for vacuum cleaners. 501.3... REQUIREMENTS AND PROHIBITIONS UNDER PART 500 § 501.3 Replacement bags for vacuum cleaners. Replacement bags for vacuum cleaners, packaged and labeled for retail sale are exempt from the requirements of § 500.15a...

  17. 16 CFR 501.3 - Replacement bags for vacuum cleaners.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Replacement bags for vacuum cleaners. 501.3... REQUIREMENTS AND PROHIBITIONS UNDER PART 500 § 501.3 Replacement bags for vacuum cleaners. Replacement bags for vacuum cleaners, packaged and labeled for retail sale are exempt from the requirements of § 500.15a...

  18. 16 CFR 501.3 - Replacement bags for vacuum cleaners.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Replacement bags for vacuum cleaners. 501.3... REQUIREMENTS AND PROHIBITIONS UNDER PART 500 § 501.3 Replacement bags for vacuum cleaners. Replacement bags for vacuum cleaners, packaged and labeled for retail sale are exempt from the requirements of § 500.15a...

  19. 16 CFR 501.3 - Replacement bags for vacuum cleaners.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Replacement bags for vacuum cleaners. 501.3... REQUIREMENTS AND PROHIBITIONS UNDER PART 500 § 501.3 Replacement bags for vacuum cleaners. Replacement bags for vacuum cleaners, packaged and labeled for retail sale are exempt from the requirements of § 500.15a...

  20. Tether Deployer And Brake

    NASA Technical Reports Server (NTRS)

    Carroll, Joseph A.; Alexander, Charles M.

    1993-01-01

    Design concept promises speed, control, and reliability. Scheme for deploying tether provides for fast, free, and snagless payout and fast, dependable braking. Developed for small, expendable tethers in outer space, scheme also useful in laying transoceanic cables, deploying guidance wires to torpedoes and missiles, paying out rescue lines from ship to ship via rockets, deploying antenna wires, releasing communication and power cables to sonobuoys and expendable bathythermographs, and in reeling out lines from fishing rods.

  1. Deployable geodesic truss structure

    NASA Technical Reports Server (NTRS)

    Mikulas, Martin M., Jr. (Inventor); Rhodes, Marvin D. (Inventor); Simonton, J. Wayne (Inventor)

    1987-01-01

    A deployable geodesic truss structure which can be deployed from a stowed state to an erected state is described. The truss structure includes a series of bays, each bay having sets of battens connected by longitudinal cross members which give the bay its axial and torsional stiffness. The cross members are hinged at their mid point by a joint so that the cross members are foldable for deployment or collapsing. The bays are deployed and stabilized by actuator means connected between the mid point joints of the cross members. Hinged longerons may be provided to also connect the sets of battens and to collapse for stowing with the rest of the truss structure.

  2. Evaluation of Sample Recovery of Odorous VOCs and Semi-VOCs From Odor Bags, Sampling Canisters, Tenax TA Sorbent Tubes, and SPME

    NASA Astrophysics Data System (ADS)

    Koziel, Jacek A.; Spinhirne, Jarett P.; Lloyd, Jenny D.; Parker, David B.; Wright, Donald W.; Kuhrt, Fred W.

    2009-05-01

    Odor samples collected in field research are complex mixtures of hundreds if not thousands of compounds. Research is needed to know how best to sample and analyze these compounds. The main objective of this research was to compare recoveries of a standard gas mixture of 11 odorous compounds from the Carboxen/PDMS 75 μm SPME fibers, PVF (Tedlar), FEP (Teflon), foil, and PET (Melinex) air sampling bags, sorbent Tenax TA tubes and standard 6 L Stabilizer™ sampling canisters after sample storage for 0.5, 24, and 120 (for sorbent tubes only) hrs at room temperature. The standard gas mixture consisted of 7 volatile fatty acids (VFAs) from acetic to hexanoic, and 4 semi-VOCs including p-cresol, indole, 4-ethylphenol, and 2'-aminoacetophenone with concentrations ranging from 5.1 ppb for indole to 1, 270 ppb for acetic acid. On average, SPME had the highest mean recovery for all 11 gases of 106.2%, and 98.3% for 0.5 and 24 hrs sample storage time, respectively. This was followed by the Tenax TA sorbent tubes (94.8% and 88.3%) for 24 and 120 hrs, respectively; PET bags (71.7% and 47.2%), FEP bags (75.4% and 39.4%), commercial Tedlar bags (67.6% and 22.7%), in-house-made Tedlar bags (47.3% and 37.4%), foil bags (16.4% and 4.3%), and canisters (4.2% and 0.5%), for 0.5 and 24 hrs, respectively. VFAs had higher recoveries than semi-VOCs for all bags and canisters. New FEP bags and new foil bags had the lowest and the highest amounts of chemical impurities, respectively. New commercial Tedlar bags had measurable concentrations of N, N-dimethyl acetamide and phenol. Foil bags had measurable concentrations of acetic, propionic, butyric, valeric and hexanoic acids.

  3. Modeling EERE Deployment Programs

    SciTech Connect

    Cort, K. A.; Hostick, D. J.; Belzer, D. B.; Livingston, O. V.

    2007-11-01

    This report compiles information and conclusions gathered as part of the “Modeling EERE Deployment Programs” project. The purpose of the project was to identify and characterize the modeling of deployment programs within the EERE Technology Development (TD) programs, address possible improvements to the modeling process, and note gaps in knowledge in which future research is needed.

  4. Deployable Geodesic Truss

    NASA Technical Reports Server (NTRS)

    Mikulas, M. M., Jr.; Rhodes, M. D.; Simonton, J. W.

    1985-01-01

    Efficiently packaged structure deployed or retracted easily. In preliminary two-bay model each bay has sets of battens connected by two longitudinal crossed members that give bay axial and torsional stiffness. Cross-members hinged in center to fold for packaging. Bays deployed and stabilized by actuators connected between center hinges of cross-members.

  5. Moss bag biomonitoring of airborne toxic element decrease on a small scale: A street study in Belgrade, Serbia.

    PubMed

    Vuković, Gordana; Aničić Urošević, Mira; Škrivanj, Sandra; Milićević, Tijana; Dimitrijević, Dragoljub; Tomašević, Milica; Popović, Aleksandar

    2016-01-15

    A database of potentially hazardous substances, necessary for estimating the exposure of humans to air pollutants, may be deficient because of a limited number of regulatory monitoring stations. This study was inspired by undeniably harmful effects of human long-term exposure to intense traffic emissions in urban area. Moss bag biomonitors were used to characterize spatial variation of airborne toxic elements near crossroads and two- and one-lane streets. The Sphagnum girgensohnii and Hypnum cupressiforme moss bags were exposed for 10 weeks to 48 sampling sites across Belgrade (Serbia) during the summer of 2014. In addition, oven-drying pretreatment of the moss bags was tested. During the experimental period, traffic flows were estimated at each site by counting the number of vehicles during the rush hours. The concentrations of 39 elements were determined in the moss samples. There was no significant difference between the results obtained for nontreated and oven-dried moss bags. For the majority of elements, the moss bags identified a common pattern of decrease in the concentration from crossroads to two- and one-lane streets. The exposed moss bags were enriched with Sb, Cu and Cr. The correlation coefficients (r=0.65-0.70) between the moss concentrations of Cr, Cu, Fe and Sb and the site-counted traffic flows also confirmed a dependence of the airborne element content on traffic emissions. A strong correlation with traffic flows makes Sb, Cu and Cr reliable traffic tracers. PMID:26520264

  6. miR-BAG: bagging based identification of microRNA precursors.

    PubMed

    Jha, Ashwani; Chauhan, Rohit; Mehra, Mrigaya; Singh, Heikham Russiachand; Shankar, Ravi

    2012-01-01

    Non-coding elements such as miRNAs play key regulatory roles in living systems. These ultra-short, ∼21 bp long, RNA molecules are derived from their hairpin precursors and usually participate in negative gene regulation by binding the target mRNAs. Discovering miRNA candidate regions across the genome has been a challenging problem. Most of the existing tools work reliably only for limited datasets. Here, we have presented a novel reliable approach, miR-BAG, developed to identify miRNA candidate regions in genomes by scanning sequences as well as by using next generation sequencing (NGS) data. miR-BAG utilizes a bootstrap aggregation based machine learning approach, successfully creating an ensemble of complementary learners to attain high accuracy while balancing sensitivity and specificity. miR-BAG was developed for wide range of species and tested extensively for performance over a wide range of experimentally validated data. Consideration of position-specific variation of triplet structural profiles and mature miRNA anchored structural profiles had a positive impact on performance. miR-BAG's performance was found consistent and the accuracy level was observed to be >90% for most of the species considered in the present study. In a detailed comparative analysis, miR-BAG performed better than six existing tools. Using miR-BAG NGS module, we identified a total of 22 novel miRNA candidate regions in cow genome in addition to a total of 42 cow specific miRNA regions. In practice, discovery of miRNA regions in a genome demands high-throughput data analysis, requiring large amount of processing. Considering this, miR-BAG has been developed in multi-threaded parallel architecture as a web server as well as a user friendly GUI standalone version. PMID:23049860

  7. Urine Bag as a Modern Day Matula

    PubMed Central

    Viswanathan, Stalin

    2013-01-01

    Since time immemorial uroscopic analysis has been a staple of diagnostic medicine. It received prominence during the middle ages with the introduction of the matula. Urinary discoloration is generally due to changes in urochrome concentration associated with the presence of other endogenous or exogenous pigments. Observation of urine colors has received less attention due to the advances made in urinalysis. A gamut of urine colors can be seen in urine bags of hospitalized patients that may give clue to presence of infections, medications, poisons, and hemolysis. Although worrisome to the patient, urine discoloration is mostly benign and resolves with removal of the offending agent. Twelve urine bags with discolored urine (and their predisposing causes) have been shown as examples. Urine colors (blue-green, yellow, orange, pink, red, brown, black, white, and purple) and their etiologies have been reviewed following a literature search in these databases: Pubmed, EBSCO, Science Direct, Proquest, Google Scholar, Springer, and Ovid. PMID:24959539

  8. Bagging, boosting, and C4.5

    SciTech Connect

    Quinlan, J.R.

    1996-12-31

    Breiman`s bagging and Freund and Schapire`s boosting are recent methods for improving the predictive power of classifier learning systems. Both form a set of classifiers that are combined by voting, bagging by generating replicated bootstrap samples of the data, and boosting by adjusting the weights of training instances. This paper reports results of applying both techniques to a system that learns decision trees and testing on a representative collection of datasets. While both approaches substantially improve predictive accuracy, boosting shows the greater benefit. On the other hand, boosting also produces severe degradation on some datasets. A small change to the way that boosting combines the votes of learned classifiers reduces this downside and also leads to slightly better results on most of the datasets considered.

  9. Fertilizer use by class: Bag, bulk, fluid

    SciTech Connect

    Hargett, N.L.; Berry, J.T.; McKinney, S.L.

    1989-01-01

    US fertilizer consumption (excluding natural organic, secondary, and micronutrient materials) increased slightly from 42.7 million tons in 1987--1988 to 42.8 million tons in 1988--1989-a gain of less than one percent. In 1988--1989, dry bulk materials represented 52.1 percent of total consumption, fluid fertilizers accounted for 38.9 percent, and bagged materials the remaining 9.0 percent. Both dry and fluid fertilizers increased in tonnage over last year but market shares of each remained essentially the same. Bagged fertilizer continued to drop in tonnage as well as in market share. Fluid fertilizer use (including anhydrous ammonia) exceeded 16.6 million tons. Solid materials accounted for 26.2 million tons. TVA estimates that total dry bulk fertilizer distribution was 22.3 million tons, representing 85 percent of all solid materials. Estimated fertilizer sales of bagged products was 3.9 million tons compared to 4.1 million tons in 1987--1988. Multiple-nutrient fertilizer consumption was 17.5 million tons in 1988--1989. Class distribution of these materials was 60.1 percent dry bulk form, 22.4 percent fluid, and 17.5 percent bagged. Fluid multiple-nutrient materials consumption remained about the same as for 1987--1988 but increased in total market share from 9.1 percent to 9.2 percent. This report is compiled annually from individual State fertilizer tonnage reports. Forty States provided complete breakdown by class in 1988-1989. Only numerical data is included.

  10. BAG (Continuous Round Robin Packet Capture)

    2006-03-10

    Bag is a miniature pcap filter which takes pcap input (or input off the wire) using a bpf filter, if specified, and then writes the output to stdout or a file (in pcap format). It depends for some aspects of its functionality on a libpcap library which uses a shared memory packet capture ring bugger. There are two build in modules: chcksum and session. the build in chcksum modules is used to anonymize the ipmore » addresses and repair any checksums in the stream. % bag -r /tmp/*.pcap -Cchucksum, 128.1 65: 10.10 The session module generates sessions which are defined as a series of packets that have two things in common. the first is a unique five-tuple composed oi an IP protocol, IP source address, IP source port, IP destination address, and IP destination port. The second is that if the originating packet is associated with a bi-directional service such as ftpltcp, characteristics and data will be kept for both flows involved with the service. The only protocols evaluated beyond the IP header are ICMP, TCP and UDP. A session can last for as long as bag is running. However, under normal conditions, sessions are generated every time they appear to have closed down. There is a man page included with the distribution which goes into more detail.« less

  11. BAG (Continuous Round Robin Packet Capture)

    SciTech Connect

    Wood, C. Philip

    2006-03-10

    Bag is a miniature pcap filter which takes pcap input (or input off the wire) using a bpf filter, if specified, and then writes the output to stdout or a file (in pcap format). It depends for some aspects of its functionality on a libpcap library which uses a shared memory packet capture ring bugger. There are two build in modules: chcksum and session. the build in chcksum modules is used to anonymize the ip addresses and repair any checksums in the stream. % bag -r /tmp/*.pcap -Cchucksum, 128.1 65: 10.10 The session module generates sessions which are defined as a series of packets that have two things in common. the first is a unique five-tuple composed oi an IP protocol, IP source address, IP source port, IP destination address, and IP destination port. The second is that if the originating packet is associated with a bi-directional service such as ftpltcp, characteristics and data will be kept for both flows involved with the service. The only protocols evaluated beyond the IP header are ICMP, TCP and UDP. A session can last for as long as bag is running. However, under normal conditions, sessions are generated every time they appear to have closed down. There is a man page included with the distribution which goes into more detail.

  12. Deployable Soft Composite Structures.

    PubMed

    Wang, Wei; Rodrigue, Hugo; Ahn, Sung-Hoon

    2016-01-01

    Deployable structure composed of smart materials based actuators can reconcile its inherently conflicting requirements of low mass, good shape adaptability, and high load-bearing capability. This work describes the fabrication of deployable structures using smart soft composite actuators combining a soft matrix with variable stiffness properties and hinge-like movement through a rigid skeleton. The hinge actuator has the advantage of being simple to fabricate, inexpensive, lightweight and simple to actuate. This basic actuator can then be used to form modules capable of different types of deformations, which can then be assembled into deployable structures. The design of deployable structures is based on three principles: design of basic hinge actuators, assembly of modules and assembly of modules into large-scale deployable structures. Various deployable structures such as a segmented triangular mast, a planar structure comprised of single-loop hexagonal modules and a ring structure comprised of single-loop quadrilateral modules were designed and fabricated to verify this approach. Finally, a prototype for a deployable mirror was developed by attaching a foldable reflective membrane to the designed ring structure and its functionality was tested by using it to reflect sunlight onto to a small-scale solar panel. PMID:26892762

  13. Deployable Soft Composite Structures

    NASA Astrophysics Data System (ADS)

    Wang, Wei; Rodrigue, Hugo; Ahn, Sung-Hoon

    2016-02-01

    Deployable structure composed of smart materials based actuators can reconcile its inherently conflicting requirements of low mass, good shape adaptability, and high load-bearing capability. This work describes the fabrication of deployable structures using smart soft composite actuators combining a soft matrix with variable stiffness properties and hinge-like movement through a rigid skeleton. The hinge actuator has the advantage of being simple to fabricate, inexpensive, lightweight and simple to actuate. This basic actuator can then be used to form modules capable of different types of deformations, which can then be assembled into deployable structures. The design of deployable structures is based on three principles: design of basic hinge actuators, assembly of modules and assembly of modules into large-scale deployable structures. Various deployable structures such as a segmented triangular mast, a planar structure comprised of single-loop hexagonal modules and a ring structure comprised of single-loop quadrilateral modules were designed and fabricated to verify this approach. Finally, a prototype for a deployable mirror was developed by attaching a foldable reflective membrane to the designed ring structure and its functionality was tested by using it to reflect sunlight onto to a small-scale solar panel.

  14. Deployable Soft Composite Structures

    PubMed Central

    Wang, Wei; Rodrigue, Hugo; Ahn, Sung-Hoon

    2016-01-01

    Deployable structure composed of smart materials based actuators can reconcile its inherently conflicting requirements of low mass, good shape adaptability, and high load-bearing capability. This work describes the fabrication of deployable structures using smart soft composite actuators combining a soft matrix with variable stiffness properties and hinge-like movement through a rigid skeleton. The hinge actuator has the advantage of being simple to fabricate, inexpensive, lightweight and simple to actuate. This basic actuator can then be used to form modules capable of different types of deformations, which can then be assembled into deployable structures. The design of deployable structures is based on three principles: design of basic hinge actuators, assembly of modules and assembly of modules into large-scale deployable structures. Various deployable structures such as a segmented triangular mast, a planar structure comprised of single-loop hexagonal modules and a ring structure comprised of single-loop quadrilateral modules were designed and fabricated to verify this approach. Finally, a prototype for a deployable mirror was developed by attaching a foldable reflective membrane to the designed ring structure and its functionality was tested by using it to reflect sunlight onto to a small-scale solar panel. PMID:26892762

  15. Heavy - metal biomonitoring by using moss bags in Florence urban area, Italy

    NASA Astrophysics Data System (ADS)

    Pellizzaro, Grazia; Canu, Annalisa; Arca, Angelo; Duce, Pierpaolo

    2013-04-01

    In the last century, pollution has become one of the most important risks for environment. In particular, heavy metal presence in air, water and soil induces toxic effects on ecosystems and human health. Monitoring airborne trace element over large areas is a task not easy to reach since the concentrations of pollutants are variable in space and time. Data from automatic devices are site-specific and very limited in number to describe spatial-temporal trends of pollutants. In addition, especially in Italy, trace elements concentrations are not often recorded by most of the automated monitoring stations. In the last decades, development of alternative and complementary methods as bio-monitoring techniques, allowed to map deposition patterns not only near single pollution sources, but also over relatively large areas at municipal or even regional scale. Bio-monitoring includes a wide array of methodologies finalised to study relationships between pollution and living organisms. Mosses and lichens have been widely used as bio-accumulators for assessing the atmospheric deposition of heavy metals in natural ecosystems and urban areas. In this study bio-monitoring of airborne trace metals was made using moss bags technique. The moss Hypnum cupressiforme was used as bio-indicator for estimating atmospheric traces metal deposition in the urban area of Florence. Moss carpets were collected in a forested area of central Sardinia (municipality of Bolotana - Nuoro), which is characterised by absence of air pollution. Moss bags were located in the urban area of Florence close to three monitoring air quality stations managed by ARPAT (Agenzia Regionale Protezione Ambiente Toscana). Two stations were located in high-traffic roads whereas the other one was located in a road with less traffic density. In each site moss bags were exposed during three campaigns of measurement conducted during the periods March-April, May-July, and August-October 2010. Two moss bags, used as control

  16. Heat and mass transfer from a baby manikin: impact of a chemical warfare protective bag.

    PubMed

    Danielsson, Ulf

    2004-09-01

    A chemical warfare (CW) protective bag for babies, younger than 1 year, has been evaluated in respect of thermal load. Heat and water vapour dissipating from the baby make the climate in the protective bag more demanding than outside. The thermal strain on a baby was estimated from heat and mass transfer data using an electrically heated baby manikin and a water-filled tray. Furthermore, a theoretical baby model was developed based on relations valid for heat and mass transfer rates from a cylinder and flat surface. Convective and radiative (dry) and evaporative heat transfer coefficients calculated from this model agreed well with the measured values. The maximum heat dissipation from a baby was calculated for combinations of air temperatures (22-30 degrees C) and relative humidities (70-90% rh). The results indicate that a naked baby can dissipate about 100% more heat than is produced during basal conditions when the bag is ventilated (70 1 min(-1)) and the ambient climate is 30 degrees C and 90% rh. If the ventilation rate is 40 1 min(-1), the margin is reduced to 50%. Clothing reduces the margin further. Ventilating the bag with 70 1 min(-1), a dressed baby can dissipate only 10-20% more heat than is produced during basal conditions in a climate (27 degrees C and 80% rh) that is obtained in a crowded shelter after about 24 h of occupation. PMID:15150661

  17. Bagworm bags as portable armour against invertebrate predators

    PubMed Central

    2016-01-01

    Some animals have evolved the use of environmental materials as “portable armour” against natural enemies. Portable bags that bagworm larvae (Lepidoptera: Psychidae) construct using their own silk and plant parts are generally believed to play an important role as a physical barrier against natural enemies. However, no experimental studies have tested the importance of bags as portable armour against predators. To clarify the defensive function, I studied the bagworm Eumeta minuscula and a potential predator Calosoma maximoviczi (Coleoptera: Carabidae). Under laboratory conditions, all bagworm larvae were attacked by carabid adults, but successfully defended themselves against the predators’ mandibles using their own bags. The portable bags, which are composed mainly of host plant twigs, may function as a physical barrier against predator mandibles. To test this hypothesis, I removed the twig bags and replaced some with herb leaf bags; all bag-removed larvae were easily caught and predated by carabids, while all bag-replaced larvae could successfully defend themselves against carabid attacks. Therefore, various types of portable bags can protect bagworm larvae from carabid attacks. This is the first study to test the defensive function of bagworm portable bags against invertebrate predators. PMID:26893969

  18. Modeling EERE deployment programs

    SciTech Connect

    Cort, K. A.; Hostick, D. J.; Belzer, D. B.; Livingston, O. V.

    2007-11-01

    The purpose of the project was to identify and characterize the modeling of deployment programs within the EERE Technology Development (TD) programs, address possible improvements to the modeling process, and note gaps in knowledge for future research.

  19. Glory Solar Array Deployment

    NASA Video Gallery

    The Glory spacecraft uses Orbital Sciences Corporation Space Systems Group's LEOStar-1 bus design, with deployable, four-panel solar arrays. This conceptual animation reveals Glory's unique solar a...

  20. Face-Saving Devices: Seat Belts and Air Bags

    MedlinePlus

    ... treatment at a trauma center after a motor vehicle collision. More than 56,000 (nearly 11 percent) ... t use or have safety devices in their vehicles. Of those who suffered facial fractures, almost three ...

  1. Gripper deploying and inverting linkage

    DOEpatents

    Minichan, Richard L.; Killian, Mark A.

    1993-01-01

    An end effector deploying and inverting linkage. The linkage comprises an air cylinder mounted in a frame or tube, a sliding bracket next to the air cylinder, a stopping bracket depending from the frame and three, pivotally-attached links that are attached to the end effector and to each other in such a way as to be capable of inverting the end effector and translating it laterally. The first of the three links is a straight element that is moved up and down by the shaft of the air cylinder. The second link is attached at one end to the stopping bracket and to the side of the end effector at the other end. The first link is attached near the middle of the second, sharply angled link so that, as the shaft of the air cylinder moves up and down, the second link rotates about an axis perpendicular to the frame and inverts and translates the end effector. The rotation of the second link is stopped at both ends when the link engages stops on the stopping bracket. The third link, slightly angled, is attached to the sliding bracket at one end and to the end of the end effector at the other. The third helps to control the end effector in its motion.

  2. Gripper deploying and inverting linkage

    DOEpatents

    Minichan, R.L.; Killian, M.A.

    1993-03-02

    An end effector deploying and inverting linkage. The linkage comprises an air cylinder mounted in a frame or tube, a sliding bracket next to the air cylinder, a stopping bracket depending from the frame and three, pivotally-attached links that are attached to the end effector and to each other in such a way as to be capable of inverting the end effector and translating it laterally. The first of the three links is a straight element that is moved up and down by the shaft of the air cylinder. The second link is attached at one end to the stopping bracket and to the side of the end effector at the other end. The first link is attached near the middle of the second, sharply angled link so that, as the shaft of the air cylinder moves up and down, the second link rotates about an axis perpendicular to the frame and inverts and translates the end effector. The rotation of the second link is stopped at both ends when the link engages stops on the stopping bracket. The third link, slightly angled, is attached to the sliding bracket at one end and to the end of the end effector at the other. The third helps to control the end effector in its motion.

  3. Evaluation of passive diffusion bag samplers in selected wells at the Naval Surface Warfare Center, Louisville, Kentucky, July 1999 to January 2000

    USGS Publications Warehouse

    Vroblesky, Don A.; Petkewich, Matthew D.; Casey, Clifton C.

    2001-01-01

    Passive diffusion bag samplers were tested in 11 wells at the Naval Surface Warfare Center, Louisville, Kentucky, by comparing the volatile organic compound concentrations obtained from passive diffusion bag samplers to volatile organic compound concentrations obtained by pumping the wells. The wells were screened in poorly permeable formations, including overburden, shale, and limestone. In five of the tested wells containing detectable volatile organic compound contamination, the data suggest that the diffusion samplers accurately reflected ambient contaminant concentrations (wells 1-NEC-15-P, 1-NEC-MW17-S, 1-NEMW23-S, 1-NW-MW24-S, and 1-NW-MW24-P). Comparison of a third well (1-NEC-MW34-S), in which the passive diffusion bag samplers produced higher concentrations than the pumped sample, is less certain because the passive diffusion bag sampler had passed through a layer of light non-aqueous phase liquid during deployment, suggesting the possibility of carryover contamination. In two wells (1-NE-MW23-P and 1-NEC-MW15-S), it was unclear whether concentrations obtained by using the passive diffusion bag samplers adequately represented in situ concentrations because the comparison of concentrations obtained by using the samplers and the pump was inconsistent between sampling events and/or between volatile organic compounds. In one well (1-NEC-MW34-P), the methodologies matched poorly, with volatile organic compound concentrations obtained by using the passive diffusion bag sampler substantially lower than those obtained by using the pump. Two of the tested wells (1-NW-MW6-I and 1-SE-MW13-I) contained no detectable contaminants in water obtained from either method. Data from wells where multiple passive diffusion bag samplers were deployed showed the lowest volatile organic compound concentrations adjacent to the vuggy limestone and higher volatile organic compound concentrations deeper in the limestone, supporting colloidal-borescope data that indicate the vuggy

  4. Umbilical Deployment Device

    NASA Technical Reports Server (NTRS)

    Shafer, Michael W.; Gallon, John C.; Rivellini, Tommaso P.

    2011-01-01

    The landing scheme for NASA's next-generation Mars rover will encompass a novel landing technique (see figure). The rover will be lowered from a rocket-powered descent stage and then placed onto the surface while hanging from three bridles. Communication between the rover and descent stage will be maintained through an electrical umbilical cable, which will be deployed in parallel with structural bridles. The -inch (13-mm) umbilical cable contains a Kevlar rope core, around which wires are wrapped to create a cable. This cable is helically coiled between two concentric truncated cones. It is deployed by pulling one end of the cable from the cone. A retractable mechanism maintains tension on the cable after deployment. A break-tie tethers the umbilical end attached to the rover even after the cable is cut after touchdown. This break-tie allows the descent stage to develop some velocity away from the rover prior to the cable releasing from the rover deck, then breaks away once the cable is fully extended. The descent stage pulls the cable up so that recontact is not made. The packaging and deployment technique can store a long length of cable in a relatively small volume while maintaining compliance with the minimum bend radius requirement for the cable being deployed. While the packaging technique could be implemented without the use of break-ties, they were needed in this design due to the vibratory environment and the retraction required by the cable. The break-ties used created a series of load-spikes in the deployment signature. The load spikes during the deployment of the initial three coils of umbilical showed no increase between the different temperature trials. The cold deployment did show an increased load requirement for cable extraction in the region where no break-ties were used. This increase in cable drag was superimposed on the loads required to rupture the last set of break-ties, and as such, these loads saw significant increase when compared to

  5. Deployment Simulation of Ultra-Lightweight Inflatable Structures

    NASA Technical Reports Server (NTRS)

    Wang, John T.; Johnson, Arthur R.

    2002-01-01

    Dynamic deployment analyses of folded inflatable tubes are conducted to investigate modeling issues related to the deployment of solar sail booms. The analyses are necessary because ground tests include gravity effects and may poorly represent deployment in space. A control volume approach, available in the LS-DYNA nonlinear dynamic finite element code, and the ideal gas law are used to simulate the dynamic inflation deployment process. Three deployment issues are investigated for a tube packaged in a Z-fold configuration. The issues are the effect of the rate of inflation, the effect of residual air, and the effect of gravity. The results of the deployment analyses reveal that the time and amount of inflation gas required to achieve a full deployment are related to these issues.

  6. Synchronously deployable truss structure

    NASA Technical Reports Server (NTRS)

    Bush, H. G. (Inventor); Mikulas, M., Jr. (Inventor); Wallsom, E. (Inventor)

    1986-01-01

    A collapsible-expandable truss structure, including first and second spaced surface truss layers having an attached core layer is described. The surface truss layers are composed of a plurality of linear struts arranged in multiple triangular configurations. Each linear strut is hinged at the center and hinge connected at each end to a nodular joint. A passive spring serves as the expansion force to move the folded struts from a stowed collapsed position to a deployed operative final truss configuration. A damper controls the rate of spring expansion for the synchronized deployment of the truss as the folded configuration is released for deployment by the restrain belts. The truss is synchronously extended under the control of motor driven spools.

  7. Remote Systems Design & Deployment

    SciTech Connect

    Bailey, Sharon A.; Baker, Carl P.; Valdez, Patrick LJ

    2009-08-28

    The Pacific Northwest National Laboratory (PNNL) was tasked by Washington River Protection Solutions, LLC (WRPS) to provide information and lessons learned relating to the design, development and deployment of remote systems, particularly remote arm/manipulator systems. This report reflects PNNL’s experience with remote systems and lays out the most important activities that need to be completed to successfully design, build, deploy and operate remote systems in radioactive and chemically contaminated environments. It also contains lessons learned from PNNL’s work experiences, and the work of others in the national laboratory complex.

  8. Modeling EERE Deployment Programs

    SciTech Connect

    Cort, Katherine A.; Hostick, Donna J.; Belzer, David B.; Livingston, Olga V.

    2007-11-08

    The purpose of this report is to compile information and conclusions gathered as part of three separate tasks undertaken as part of the overall project, “Modeling EERE Deployment Programs,” sponsored by the Planning, Analysis, and Evaluation office within the Department of Energy’s Office of Energy Efficiency and Renewable Energy (EERE). The purpose of the project was to identify and characterize the modeling of deployment programs within the EERE Technology Development (TD) programs, address improvements to modeling in the near term, and note gaps in knowledge where future research is needed.

  9. Bagging and boosting negatively correlated neural networks.

    PubMed

    Islam, Md Monirul; Yao, Xin; Shahriar Nirjon, S M Shahriar; Islam, Muhammad Asiful; Murase, Kazuyuki

    2008-06-01

    In this paper, we propose two cooperative ensemble learning algorithms, i.e., NegBagg and NegBoost, for designing neural network (NN) ensembles. The proposed algorithms incrementally train different individual NNs in an ensemble using the negative correlation learning algorithm. Bagging and boosting algorithms are used in NegBagg and NegBoost, respectively, to create different training sets for different NNs in the ensemble. The idea behind using negative correlation learning in conjunction with the bagging/boosting algorithm is to facilitate interaction and cooperation among NNs during their training. Both NegBagg and NegBoost use a constructive approach to automatically determine the number of hidden neurons for NNs. NegBoost also uses the constructive approach to automatically determine the number of NNs for the ensemble. The two algorithms have been tested on a number of benchmark problems in machine learning and NNs, including Australian credit card assessment, breast cancer, diabetes, glass, heart disease, letter recognition, satellite, soybean, and waveform problems. The experimental results show that NegBagg and NegBoost require a small number of training epochs to produce compact NN ensembles with good generalization. PMID:18558541

  10. Vibration and shape control of inflatable deployment structures

    NASA Astrophysics Data System (ADS)

    Lu, Mingyu; Tian, Zhenhui; Tan, Huifeng

    2007-07-01

    This paper describes the status of on-going work at the vibration and shape control of large inflatable deployment structures. It presents a brief summary of the related concepts in inflatable deployment structures, smart structures and the applications between them. Inflatable deployment structures which made of thin membrane can hardly achieve high surface precision and good dynamic properties. Smart materials and structures can be used to adjust boundary and membrane surface, which give the ability of vibration and shape control. Results indicated that the use of smart materials and structures might easily help inflatable deployment structures reduce vibration and achieve higher surface precision. A large-scale and light weight reflector model mixed with inflatable deployment and rib-support structure was developed. It is constructed by five parts: central connection tank, radial supporting ribs, inflation bags, meshed reflective surface and supporting booms. To improve surface precision, some sensors and actuators made of smart materials could be designed to guarantee the reflector model has more control authority over the whole structure.

  11. Deployment & Market Transformation (Brochure)

    SciTech Connect

    Not Available

    2012-04-01

    NREL's deployment and market transformation (D and MT) activities encompass the laboratory's full range of technologies, which span the energy efficiency and renewable energy spectrum. NREL staff educates partners on how they can advance sustainable energy applications and also provides clients with best practices for reducing barriers to innovation and market transformation.

  12. Parametric Cost Deployment

    NASA Technical Reports Server (NTRS)

    Dean, Edwin B.

    1995-01-01

    Parametric cost analysis is a mathematical approach to estimating cost. Parametric cost analysis uses non-cost parameters, such as quality characteristics, to estimate the cost to bring forth, sustain, and retire a product. This paper reviews parametric cost analysis and shows how it can be used within the cost deployment process.

  13. Deployable video conference table

    NASA Technical Reports Server (NTRS)

    Cohen, Marc M. (Inventor); Lissol, Peter (Inventor)

    1993-01-01

    A deployable table is presented. The table is stowed in and deployed from a storage compartment based upon a non-self rigidizing, 4-hinge, arch support structure that folds upon itself to stow and that expands to deploy. The work surfaces bypass each other above and below to allow the deployment mechanism to operate. This assembly includes the following: first and second primary pivot hinges placed at the opposite ends of the storage compartment; first and second lateral frame members with proximal ends connected to the first and second pivot hinges; a medial frame member offset from and pivotally connected to distal ends of the first and second members through third and fourth medial pivot hinges; and left-side, right-side, and middle trays connected respectively to the first, second, and third frame members and being foldable into and out of the storage compartment by articulation of the first, second, third, and fourth joints. At least one of the third and fourth joints are locked to set the first, second, and third frame members in a desired angular orientation with respect to each other.

  14. 50 CFR 665.212 - Non-commercial bag limits.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 9 2010-10-01 2010-10-01 false Non-commercial bag limits. 665.212 Section... Non-commercial bag limits. No more than a total of five fish (all species combined) identified as... any individual participating in a non-commercial vessel-based fishing trip in the MHI...

  15. 20. BUILDING NO. 448, ORDNANCE FACILITY (HOWITZER AND ALIQUOT BAG ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. BUILDING NO. 448, ORDNANCE FACILITY (HOWITZER AND ALIQUOT BAG LOADING), LOOKING WEST AT SOUTHEAST CORNER. BUILDING NO. 448-C, GENERAL STOREHOUSE (HIGH EXPLOSIVES MAGAZINE-WEIGHING & MIXING), IN BACKGROUND. - Picatinny Arsenal, 400 Area, Gun Bag Loading District, State Route 15 near I-80, Dover, Morris County, NJ

  16. 23. BUILDING NO. 452, ORDNANCE FACILITY (BAG CHARGE FILLING PLANT), ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    23. BUILDING NO. 452, ORDNANCE FACILITY (BAG CHARGE FILLING PLANT), INTERIOR, LOOKING SOUTH DOWN CENTRAL CORRIDOR. NOTE BINS IN WALLS ON EITHER SIDE OF CORRIDOR, USED FOR PASSING EXPLOSIVES AND LOADED ITEMS TO SIEVING ROOMS BEYOND WALLS. - Picatinny Arsenal, 400 Area, Gun Bag Loading District, State Route 15 near I-80, Dover, Morris County, NJ

  17. 14 CFR 223.24 - Transportation of empty mail bags.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Transportation of empty mail bags. 223.24 Section 223.24 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS FREE AND REDUCED-RATE TRANSPORTATION International Travel § 223.24 Transportation of empty mail bags. Any...

  18. 42 CFR 84.88 - Breathing bag test.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Breathing bag test. 84.88 Section 84.88 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self-Contained Breathing Apparatus § 84.88 Breathing bag test. (a)...

  19. 50 CFR 622.408 - Bag/possession limits.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Lobster Fishery of the Gulf of Mexico and South Atlantic § 622.408 Bag/possession limits. (a) EEZ off the southern Atlantic states, other than Florida. The daily bag or possession limit for spiny lobster in or... or possession limit of spiny lobster in or from the EEZ off Florida and off the Gulf states,...

  20. 50 CFR 640.23 - Bag/possession limits.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE SPINY LOBSTER FISHERY OF THE GULF OF MEXICO AND SOUTH ATLANTIC Management... daily bag or possession limit for spiny lobster in or from the EEZ off the southern Atlantic states... fishing season specified in § 640.20(b)(1), the daily bag or possession limit of spiny lobster in or...

  1. 50 CFR 640.23 - Bag/possession limits.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE SPINY LOBSTER FISHERY OF THE GULF OF MEXICO AND SOUTH ATLANTIC Management... daily bag or possession limit for spiny lobster in or from the EEZ off the southern Atlantic states... fishing season specified in § 640.20(b)(1), the daily bag or possession limit of spiny lobster in or...

  2. 50 CFR 622.408 - Bag/possession limits.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Lobster Fishery of the Gulf of Mexico and South Atlantic § 622.408 Bag/possession limits. (a) EEZ off the southern Atlantic states, other than Florida. The daily bag or possession limit for spiny lobster in or... or possession limit of spiny lobster in or from the EEZ off Florida and off the Gulf states,...

  3. 50 CFR 640.23 - Bag/possession limits.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE SPINY LOBSTER FISHERY OF THE GULF OF MEXICO AND SOUTH ATLANTIC Management... daily bag or possession limit for spiny lobster in or from the EEZ off the southern Atlantic states... fishing season specified in § 640.20(b)(1), the daily bag or possession limit of spiny lobster in or...

  4. 50 CFR 660.721 - Recreational fishing bag limits.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... HMS. The bag limits include fish taken in both state and Federal waters. (a) Albacore Tuna Daily Bag... recreational fisherman may take or retain no more than: (1) Ten albacore tuna if any part of the fishing trip..., Santa Barbara County) to the U.S.-Mexico border. (2) Twenty-five albacore tuna if any part of...

  5. 50 CFR 660.721 - Recreational fishing bag limits.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... HMS. The bag limits include fish taken in both state and Federal waters. (a) Albacore Tuna Daily Bag... recreational fisherman may take or retain no more than: (1) Ten albacore tuna if any part of the fishing trip..., Santa Barbara County) to the U.S.-Mexico border. (2) Twenty-five albacore tuna if any part of...

  6. 50 CFR 660.721 - Recreational fishing bag limits.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... HMS. The bag limits include fish taken in both state and Federal waters. (a) Albacore Tuna Daily Bag... recreational fisherman may take or retain no more than: (1) Ten albacore tuna if any part of the fishing trip..., Santa Barbara County) to the U.S.-Mexico border. (2) Twenty-five albacore tuna if any part of...

  7. 50 CFR 660.721 - Recreational fishing bag limits.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... HMS. The bag limits include fish taken in both state and Federal waters. (a) Albacore Tuna Daily Bag... recreational fisherman may take or retain no more than: (1) Ten albacore tuna if any part of the fishing trip..., Santa Barbara County) to the U.S.-Mexico border. (2) Twenty-five albacore tuna if any part of...

  8. 50 CFR 660.721 - Recreational fishing bag limits.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... HMS. The bag limits include fish taken in both state and Federal waters. (a) Albacore Tuna Daily Bag... recreational fisherman may take or retain no more than: (1) Ten albacore tuna if any part of the fishing trip..., Santa Barbara County) to the U.S.-Mexico border. (2) Twenty-five albacore tuna if any part of...

  9. Commander Brand stows trash in jettison bag on middeck

    NASA Technical Reports Server (NTRS)

    1982-01-01

    Commander Brand disposes of empty food containers and dry trash in jettison bag and stows bag in middeck volume under MA73C control panel. Side hatch is visible behind Brand. Brand is wearing constant wear garment with communications kit assembly headset interface unit (HIU) and note pad strapped to his thighs.

  10. EPA FABRIC FILTRATION STUDIES: 4. BAG AGING EFFECTS

    EPA Science Inventory

    The report gives results of a study to determine the effects of aging on filter bags made of woven polyester. Fabric filter life can be divided into three periods: break-in, steady-state, and wear-out. During the break-in, both bag collection efficiency and the pressure drop acro...

  11. Plastic Bags to Batteries: A Green Chemistry Solution

    SciTech Connect

    2010-01-01

    Plastic bags are the scourge of roadsides, parking lots and landfills. But chemistry comes to the rescue! At Argonne National Laboratory, Vilas Pol has found a way to not only recycle plastic bags--but make them into valuable batteries for cell phones and laptops.

  12. 49 CFR 178.520 - Standards for textile bags.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., plastic film bonded to the inner surface of the bag, or one or more inner liners made of paper or plastic... appropriate means, such as by the use of separate inner liners of water-resistant paper (e.g., waxed kraft... bag, or one or more inner liners made of plastic material or metalized film or foil. (4) Maximum...

  13. 49 CFR 178.520 - Standards for textile bags.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., plastic film bonded to the inner surface of the bag, or one or more inner liners made of paper or plastic... appropriate means, such as by the use of separate inner liners of water-resistant paper (e.g., waxed kraft... bag, or one or more inner liners made of plastic material or metalized film or foil. (4) Maximum...

  14. 49 CFR 178.520 - Standards for textile bags.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ..., plastic film bonded to the inner surface of the bag, or one or more inner liners made of paper or plastic... appropriate means, such as by the use of separate inner liners of water-resistant paper (e.g., waxed kraft... bag, or one or more inner liners made of plastic material or metalized film or foil. (4) Maximum...

  15. Plastic Bags to Batteries: A Green Chemistry Solution

    ScienceCinema

    None

    2013-04-19

    Plastic bags are the scourge of roadsides, parking lots and landfills. But chemistry comes to the rescue! At Argonne National Laboratory, Vilas Pol has found a way to not only recycle plastic bags--but make them into valuable batteries for cell phones and laptops.

  16. 49 CFR 178.520 - Standards for textile bags.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., plastic film bonded to the inner surface of the bag, or one or more inner liners made of paper or plastic... paper, tarred paper, or plastic-coated kraft paper), or plastic film bonded to the inner surface of the bag, or one or more inner liners made of plastic material or metalized film or foil. (4) Maximum...

  17. 10. BUILDING NO. 445, PHYSICS LAB (FORMERLY GUN BAG LOADING), ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. BUILDING NO. 445, PHYSICS LAB (FORMERLY GUN BAG LOADING), LOOKING AT SOUTHEAST CORNER. BUILDING NO. 332, CHANGE HOUSE, IN RIGHT BACKGROUND; BUILDING NO. 445-F, MAGAZINE, IN LEFT BACKGROUND. - Picatinny Arsenal, 400 Area, Gun Bag Loading District, State Route 15 near I-80, Dover, Morris County, NJ

  18. 15. BUILDING NO. 445, PHYSICS LAB (FORMERLY GUN BAG LOADING), ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. BUILDING NO. 445, PHYSICS LAB (FORMERLY GUN BAG LOADING), INTERIOR, FOURTH LEVEL. POWDER HOPPER AT TOP OF ELEVATOR SHAFT. POWDER DISTRIBUTED FROM HERE TO LOADING ROOMS BY TUBES. - Picatinny Arsenal, 400 Area, Gun Bag Loading District, State Route 15 near I-80, Dover, Morris County, NJ

  19. 16. BUILDING NO. 445, PHYSICS LAB (FORMERLY GUN BAG LOADING), ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. BUILDING NO. 445, PHYSICS LAB (FORMERLY GUN BAG LOADING), INTERIOR, SECOND LEVEL. LOOKING UP AT POWDER AND DISTRIBUTION TUBES. ELEVATOR SHAFT ON LEFT. - Picatinny Arsenal, 400 Area, Gun Bag Loading District, State Route 15 near I-80, Dover, Morris County, NJ

  20. MICROWAVE POPCORN EMISSIONS RELEASED DURING COOKING AND BAG OPENING

    EPA Science Inventory

    Data are not currently available on the contaminants released when microwave popcorn, flavorings and bags are heated to microwave temperatures. Thus, the primary goal of this work is to identify and quantify contaminants emitted while popping and opening a bag of microwave popcor...

  1. Wing Deployment Sequence #2: The deployable, inflatable wing technology demonstrator experiment airc

    NASA Technical Reports Server (NTRS)

    2001-01-01

    Wing Deployment Sequence #2: The deployable, inflatable wing technology demonstrator experiment aircraft's wings continue deploying following separation from its carrier aircraft during a flight conducted by the NASA Dryden Flight Research Center, Edwards, California. The inflatable wing project represented a basic flight research effort by Dryden personnel. Three successful flights of the I2000 inflatable wing aircraft occurred. During the flights, the team air-launched the radio-controlled (R/C) I2000 from an R/C utility airplane at an altitude of 800-1000 feet. As the I2000 separated from the carrier aircraft, its inflatable wings 'popped-out,' deploying rapidly via an on-board nitrogen bottle. The aircraft remained stable as it transitioned from wingless to winged flight. The unpowered I2000 glided down to a smooth landing under complete control.

  2. Wing Deployment Sequence #1: The deployable, inflatable wing technology demonstrator experiment airc

    NASA Technical Reports Server (NTRS)

    2001-01-01

    Wing Deployment Sequence #1: The deployable, inflatable wing technology demonstrator experiment aircraft's wings begin deploying following separation from its carrier aircraft during a flight conducted by the NASA Dryden Flight Research Center, Edwards, California. The inflatable wing project represented a basic flight research effort by Dryden personnel. Three successful flights of the I2000 inflatable wing aircraft occurred. During the flights, the team air-launched the radio-controlled (R/C) I2000 from an R/C utility airplane at an altitude of 800-1000 feet. As the I2000 separated from the carrier aircraft, its inflatable wings 'popped-out,' deploying rapidly via an on-board nitrogen bottle. The aircraft remained stable as it transitioned from wingless to winged flight. The unpowered I2000 glided down to a smooth landing under complete control.

  3. Wing Deployment Sequence #3: The deployable, inflatable wing technology demonstrator experiment airc

    NASA Technical Reports Server (NTRS)

    2001-01-01

    Wing Deployment Sequence #3: The deployable, inflatable wing technology demonstrator experiment aircraft's wings fully deployed during flight following separation from its carrier aircraft during a flight conducted by the NASA Dryden Flight Research Center, Edwards, Californiaornia. The inflatable wing project represented a basic flight research effort by Dryden personnel. Three successful flights of the I2000 inflatable wing aircraft occurred. During the flights, the team air-launched the radio-controlled (R/C) I2000 from an R/C utility airplane at an altitude of 800-1000 feet. As the I2000 separated from the carrier aircraft, its inflatable wings 'popped-out,' deploying rapidly via an on-board nitrogen bottle. The aircraft remained stable as it transitioned from wingless to winged flight. The unpowered I2000 glided down to a smooth landing under complete control.

  4. The carrier bag theory of nursing practice.

    PubMed

    Maeve, M K

    1994-06-01

    The carrier bag theory of nursing practice is a reinterpretation of how nursing is known and practiced that explicitly acknowledges and values nursing's oral and experiential traditions. An assumption of this work is that the region of experience that is nursing has been effectively divided into two worlds--academia and the world of practice. This has resulted in a theory-practice gap and an elite class-working class gap, as well as a gap between epistemes, or "knowing that" versus "knowing how." This article describes the development of reflective practice and resulting narratives from a critical perspective as a way of creating a pathway between the two worlds of nursing and honoring scholarship in all the ways nursing is known and practiced. PMID:8092815

  5. Large Deployable Reflector (LDR)

    NASA Technical Reports Server (NTRS)

    Alff, W. H.

    1980-01-01

    The feasibility and costs were determined for a 1 m to 30 m diameter ambient temperature, infrared to submillimeter orbiting astronomical telescope which is to be shuttle-deployed, free-flying, and have a 10 year orbital life. Baseline concepts, constraints on delivery and deployment, and the sunshield required are examined. Reflector concepts, the optical configuration, alignment and pointing, and materials are also discussed. Technology studies show that a 10 m to 30 m diameter system which is background and diffraction limited at 30 micron m is feasible within the stated time frame. A 10 m system is feasible with current mirror technology, while a 30 m system requires technology still in development.

  6. Deployable tensegrity towers

    NASA Astrophysics Data System (ADS)

    Pinaud, Jean-Paul

    The design of a complete tensegrity system involves the analysis of static equilibria, the mechanical properties of the configuration, the deployment of the structure, and the regulation and dynamics of the system. This dissertation will explore these steps for two different types of structures. The first structure is the traditional Snelson Tower, where struts are disjointed, and is referred to as a Class 1 tensegrity. The second structure of interest is referred to as a Class 2 structure, where two struts come in contact at a joint. The first part of the thesis involves the dynamics of these tensegrity structures. Two complete nonlinear formulations for the dynamics of tensegrity systems are derived. In addition, a general formulation for the statics for an arbitrary tensegrity structure resulted from one of the dynamic formulations and is presented with symmetric and nonsymmetric tensegrity configurations. The second part of the thesis involves statics. The analysis of static equilibria and the implementation of this analysis into an open loop control law that will deploy the tensegrity structures along an equilibrium manifold are derived. The analysis of small stable tensegrity units allow for a modular design, where a collection of these units can be assembled into a larger structure that obeys the same control laws for deployment concepts. In addition, a loaded structure is analyzed to determine the optimal number of units required to obtain a minimal mass configuration. The third part of the thesis involves laboratory hardware that demonstrates the practical use of the methodology presented. A Class 2 symmetric structure is constructed, deployed, and stowed using the analysis from part two. In addition, the static equilibria of a Class 1 structure is computed to obtain nonsymmetric reconfigurations. The final part of the thesis involves the attenuation of white noise disturbances acting on nodes of both structures. The structures are simulated using linear

  7. Phoenix Deploying its Wrist

    NASA Technical Reports Server (NTRS)

    2008-01-01

    This animated gif shows a series of images taken by Phoenix's Stereo Surface Imager (SSI) on Sol 3. It illustrates the actions that Phoenix's Robotic Arm took to deploy its wrist.

    The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

  8. Deployable Crew Quarters

    NASA Technical Reports Server (NTRS)

    Izenson, Michael G.; Chen, Weibo

    2008-01-01

    The deployable crew quarters (DCQ) have been designed for the International Space Station (ISS). Each DCQ would be a relatively inexpensive, deployable boxlike structure that is designed to fit in a rack bay. It is to be occupied by one crewmember to provide privacy and sleeping functions for the crew. A DCQ comprises mostly hard panels, made of a lightweight honeycomb or matrix/fiber material, attached to each other by cloth hinges. Both faces of each panel are covered with a layer of Nomex cloth and noise-suppression material to provide noise isolation from ISS. On Earth, the unit is folded flat and attached to a rigid pallet for transport to the ISS. On the ISS, crewmembers unfold the unit and install it in place, attaching it to ISS structural members by use of soft cords (which also help to isolate noise and vibration). A few hard pieces of equipment (principally, a ventilator and a smoke detector) are shipped separately and installed in the DCQ unit by use of a system of holes, slots, and quarter-turn fasteners. Full-scale tests showed that the time required to install a DCQ unit amounts to tens of minutes. The basic DCQ design could be adapted to terrestrial applications to satisfy requirements for rapid deployable emergency shelters that would be lightweight, portable, and quickly erected. The Temporary Early Sleep Station (TeSS) currently on-orbit is a spin-off of the DCQ.

  9. Treatment Deployment Evaluation Tool

    SciTech Connect

    M. A. Rynearson; M. M. Plum

    1999-08-01

    The U.S. Department of Energy (DOE) is responsible for the final disposition of legacy spent nuclear fuel (SNF). As a response, DOE's National Spent Nuclear Fuel Program (NSNFP) has been given the responsibility for the disposition of DOE-owned SNF. Many treatment technologies have been identified to treat some forms of SNF so that the resulting treated product is acceptable by the disposition site. One of these promising treatment processes is the electrometallurgical treatment (EMT) currently in development; a second is an Acid Wash Decladding process. The NSNFP has been tasked with identifying possible strategies for the deployment of these treatment processes in the event that a treatment path is deemed necessary. To support the siting studies of these strategies, economic evaluations are being performed to identify the least-cost deployment path. This model (tool) was developed to consider the full scope of costs, technical feasibility, process material disposition, and schedule attributes over the life of each deployment alternative. Using standard personal computer (PC) software, the model was developed as a comprehensive technology economic assessment tool using a Life-Cycle Cost (LCC) analysis methodology. Model development was planned as a systematic, iterative process of identifying and bounding the required activities to dispose of SNF. To support the evaluation process, activities are decomposed into lower level, easier to estimate activities. Sensitivity studies can then be performed on these activities, defining cost issues and testing results against the originally stated problem.

  10. Treatment Deployment Evaluation Tool

    SciTech Connect

    Rynearson, Michael Ardel; Plum, Martin Michael

    1999-08-01

    The U.S. Department of Energy (DOE) is responsible for the final disposition of legacy spent nuclear fuel (SNF). As a response, DOE's National Spent Nuclear Fuel Program (NSNFP) has been given the responsibility for the disposition of DOE -owned SNF. Many treatment technologies have been identified to treat some forms of SNF so that the resulting treated product is acceptable by the disposition site. One of these promising treatment processes is the electrometallurgical treatment (EMT) currently in development; a second is an Acid Wash Decladding process. The NSNFP has been tasked with identifying possible strategies for the deployment of these treatment processes in the event that the treatment path is deemed necessary. To support the siting studies of these strategies, economic evaluations are being performed to identify the least-cost deployment path. This model (tool) was developed to consider the full scope of costs, technical feasibility, process material disposition, and schedule attributes over the life of each deployment alternative. Using standard personal computer (PC) software, the model was developed as a comprehensive technology economic assessment tool using a Life-Cycle Cost (LCC) analysis methodology. Model development was planned as a systematic, iterative process of identifying and bounding the required activities to dispose of SNF. To support the evaluation process, activities are decomposed into lower level, easier to estimate activities. Sensitivity studies can then be performed on these activities, defining cost issues and testing results against the originally stated problem.

  11. Large Deployable Reflectarray Antenna

    NASA Technical Reports Server (NTRS)

    Fang, Houfei; Huang, John; Lou, Michael

    2006-01-01

    A report discusses a 7-meter-diameter reflectarray antenna that has been conceived in a continuing effort to develop large reflectarray antennas to be deployed in outer space. Major underlying concepts were reported in three prior NASA Tech Briefs articles: "Inflatable Reflectarray Antennas" (NPO-20433), Vol. 23, No. 10 (October 1999), page 50; "Tape-Spring Reinforcements for Inflatable Structural Tubes" (NPO-20615), Vol. 24, No. 7 (July 2000), page 58; and "Self-Inflatable/Self-Rigidizable Reflectarray Antenna" (NPO-30662), Vol. 28, No. 1 (January 2004), page 61. Like previous antennas in the series, the antenna now proposed would include a reflectarray membrane stretched flat on a frame of multiple inflatable booms. The membrane and booms would be rolled up and folded for compact stowage during transport. Deployment in outer space would be effected by inflating the booms to unroll and then to unfold the membrane, thereby stretching the membrane out flat to its full size. The membrane would achieve the flatness for a Ka-band application. The report gives considerable emphasis to designing the booms to rigidify themselves upon deployment: for this purpose, the booms could be made as spring-tape-reinforced aluminum laminate tubes like those described in two of the cited prior articles.

  12. Newly Deployed Sojourner Rover

    NASA Technical Reports Server (NTRS)

    1999-01-01

    This 8-image mosaic was acquired during the late afternoon (near 5pm LST, note the long shadows) on Sol 2 as part of the predeploy 'insurance panorama' and shows the newly deployed rover sitting on the Martian surface. This color image was generated from images acquired at 530,600, and 750 nm. The insurance panorama was designed as 'insurance' against camera failure upon deployment. Had the camera failed, the losslessly-compressed, multispectral insurance panorama would have been the main source of image data from the IMP.

    However, the camera deployment was successful, leaving the insurance panorama to be downlinked to Earth several weeks later. Ironically enough, the insurance panorama contains some of the best quality image data because of the lossless data compression and relatively dust-free state of the camera and associated lander/rover hardware on Sol 2.

    Mars Pathfinder is the second in NASA's Discovery program of low-cost spacecraft with highly focused science goals. The Jet Propulsion Laboratory, Pasadena, CA, developed and manages the Mars Pathfinder mission for NASA's Office of Space Science, Washington, D.C. JPL is an operating division of the California Institute of Technology (Caltech). The IMP was developed by the University of Arizona Lunar and Planetary Laboratory under contract to JPL. Peter Smith is the Principal investigator.

  13. [Air pollution in the vicinity of streets].

    PubMed

    Wanner, H U; Deuber, A; Satish, J; Meier, M; Sommer, H

    1976-01-01

    Air samples were collected in plastic bags simultaneously at various measuring points in the close range of streets. When examining the various bag materials, Teflon bags showed the smallest deviations in direct analyses and in analyses of up to two hours after the drawing of samples. The following methods were used for the analysis of the air samples collected in the bags: coulometry for CO and SO2, chemiluminescence for NO/NO2, chromotrophic acid for CH2O and flame ionization for hydrocarbons. The various components were measured close to a highway and near streets in residential and business areas. The simultaneously drawn samples showed a marked dependence on traffic frequency, type of built-up area along the streets as well as meteorological conditions. An opinion survey among adjacent residents on annoyance caused by air pollution and noise resulted in distinct differences between the sections with different traffic intensity. PMID:997954

  14. Sepsis management in the deployed field hospital.

    PubMed

    Johnston, Andrew McD; Easby, D; Ewington, I

    2013-09-01

    Sepsis, a syndrome caused by severe infection, affects a small proportion of military casualties but has a significant effect in increasing morbidity and mortality, including causing some preventable deaths. Casualties with abdominal trauma and those with significant tissue loss appear to be at a greater risk of sepsis. In this article, the diagnosis and management of sepsis in military casualties with reference to the Surviving Sepsis Campaign guidelines are examined. We discuss the management considerations specific to military casualties in the deployed setting and also discuss factors affecting evacuation by the UK Royal Air Force Critical Care Air Support Team. PMID:24109139

  15. Deployable Reflector for Solar Cells

    NASA Technical Reports Server (NTRS)

    Johnson, K. L.

    1982-01-01

    Unfoldable-membrane-reflector concept leads to mobile photovoltaic generators. Hinged containers swing open for deployment, and counterbalance beam swings into position. Folded reflector membranes are unfolded as deployment mast is extended, until stretched out flat.

  16. Attractive Casimir effect in an infrared modified gluon bag model

    SciTech Connect

    Oxman, L.E.; Amaral, R.L.P.G.

    2005-12-15

    In this work, we are motivated by previous attempts to derive the vacuum contribution to the bag energy in terms of familiar Casimir energy calculations for spherical geometries. A simple infrared modified model is introduced which allows studying the effects of the analytic structure as well as the geometry in a clear manner. In this context, we show that if a class of infrared vanishing effective gluon propagators is considered, then the renormalized vacuum energy for a spherical bag is attractive, as required by the bag model to adjust hadron spectroscopy.

  17. Deployment of a Curved Truss

    NASA Technical Reports Server (NTRS)

    Giersch, Louis R.; Knarr, Kevin

    2010-01-01

    Structures capable of deployment into complex, three-dimensional trusses have well known space technology applications such as the support of spacecraft payloads, communications antennas, radar reflectors, and solar concentrators. Such deployable trusses could also be useful in terrestrial applications such as the rapid establishment of structures in military and emergency service situations, in particular with regard to the deployment of enclosures for habitat or storage. To minimize the time required to deploy such an enclosure, a single arch-shaped truss is preferable to multiple straight trusses arranged vertically and horizontally. To further minimize the time required to deploy such an enclosure, a synchronous deployment with a single degree of freedom is also preferable. One method of synchronizing deployment of a truss is the use of a series of gears; this makes the deployment sequence predictable and testable, allows the truss to have a minimal stowage volume, and the deployed structure exhibits the excellent stiffness-to-mass and strength-to-mass ratios characteristic of a truss. A concept for using gears with varying ratios to deploy a truss into a curved shape has been developed and appears to be compatible with both space technology applications as well as potential use in terrestrial applications such as enclosure deployment. As is the case with other deployable trusses, this truss is formed using rigid elements (e.g., composite tubes) along the edges, one set of diagonal elements composed of either cables or folding/hinged rigid members, and the other set of diagonal elements formed by a continuous cable that is tightened by a motor or hand crank in order to deploy the truss. Gears of varying ratios are used to constrain the deployment to a single degree of freedom, making the deployment synchronous, predictable, and repeatable. The relative sizes of the gears and the relative dimensions of the diagonal elements determine the deployed geometry (e

  18. Using ERF Devices to Control Deployments of Space Structures

    NASA Technical Reports Server (NTRS)

    Bar-Cohen, Yoseph; Chang, Zensheu; Salama, Moktar; Bao, Xiaoqi; Sherrit, Steward; Jenkins, Christopher; Vinogradov, Aleksandra

    2003-01-01

    A report proposes devices containing electrorheological fluids (ERFs) damper for controlling deployments of lightweight, flexible structures in outer space. The structures would include spring members that could be wound or compressed for compact stowage during transport. The ERF based damper would keep the structures compacted and/or regulate the speeds with which the structures would spring out for deployment. After deployment, ERF based dampening mechanism could be used to rigidize the structures or damp their vibrations. An experimental ERF deployment controlled structure described in the report comprised two metal carpenter s measuring tapes sandwiched together, held slightly apart by rubber-band spacers, and placed in a bag filled with an ERF. The viscosity of the ERF varied with the voltage applied to the tapes, such that it was possible to hold the tapes in the wound condition or slow the speed with which they sprung from the wound to the straight condition. The report describes several potential variations on the basic concept of an ERF-controlled structural member, including compartmentalization of the interior volume to prevent total loss of the ERF in case of a leak and the use of multiple, individually addressable electrode pairs to enable more localized control.

  19. Numerical prediction of deployment, initial fill, and inflation of parachute canopies

    SciTech Connect

    Purvis, J.W.

    1984-01-01

    An analysis is presented for predicting parachute deployment and inflation in incompressible flow. Equations of motion are developed from first principles as applied to a discrete element representation of the canopy, suspension lines, payload, and deployment bag/pilot chute. Fluid conservation equations for deforming, accelerating control volumes are solved to determine the flow properties of the captured fluid. The unsteady pressure distribution in the internal flow is used to drive the equations of motion for the discrete element representation of the system, which in turn provides the unsteady boundary conditions for the fluid conservation equations.

  20. Vacuum-bag-only processing of composites

    NASA Astrophysics Data System (ADS)

    Thomas, Shad

    Ultrasonic imaging in the C-scan mode in conjunction with the amplitude of the reflected signal was used to measure flow rates of an epoxy resin film penetrating through the thickness of single layers of woven carbon fabric. Assemblies, comprised of a single layer of fabric and film, were vacuum-bagged and ultrasonically scanned in a water tank during impregnation at 50°C, 60°C, 70°C, and 80°C. Measured flow rates were plotted versus inverse viscosity to determine the permeability in the thin film, non-saturated system. The results demonstrated that ultrasonic imaging in the C-scan mode is an effective method of measuring z-direction resin flow through a single layer of fabric. The permeability values determined in this work were consistent with permeability values reported in the literature. Capillary flow was not observed at the temperatures and times required for pressurized flow to occur. The flow rate at 65°C was predicted from the linear plot of flow rate versus inverse viscosity. The effects of fabric architecture on through-thickness flow rates during impregnation of an epoxy resin film were measured by ultrasonic imaging. Multilayered laminates comprised of woven carbon fabrics and epoxy films (prepregs) were fabricated by vacuum-bagging. Ultrasonic imaging was performed in a heated water tank (65°C) during impregnation. Impregnation rates showed a strong dependence on fabric architecture, despite similar areal densities. Impregnation rates are directly affected by inter-tow spacing and tow nesting, which depend on fabric architecture, and are indirectly affected by areal densities. A new method of predicting resin infusion rates in prepreg and resin film infusion processes was proposed. The Stokes equation was used to derive an equation to predict the impregnation rate of laminates as a function of fabric architecture. Flow rate data previously measured by ultrasound was analyzed with the new equation and the Kozeny-Carman equation. A fiber

  1. When Loved Ones Get Deployed

    MedlinePlus

    ... I Help a Friend Who Cuts? When Loved Ones Get Deployed KidsHealth > For Teens > When Loved Ones Get Deployed Print A A A Text Size ... for you and your family while your loved one is away. If your parent is deployed, you ...

  2. Joint for deployable structures

    NASA Technical Reports Server (NTRS)

    Craighead, N. D., II; Preliasco, R. J.; Hult, T. D. (Inventor)

    1985-01-01

    A joint is described for connecting a pair of beams to pivot them between positions in alignment or beside one another, which is of light weight and which operates in a controlled manner. The joint includes a pair of fittings and at least one center link having opposite ends pivotally connected to opposite fittings and having axes that pass through centerplates of the fittings. A control link having opposite ends pivotally connected to the different fittings controls their relative orientations, and a toggle assemly holds the fittings in the deployed configuration wherein they are aligned. The fittings have stops that lie on one side of the centerplane opposite the toggle assembly.

  3. Developing a strategy to improve ventilation in an unprotected airway with a modified mouth-to-bag resuscitator in apneic patients.

    PubMed

    von Goedecke, Achim; Keller, Christian; Wagner-Berger, Horst G; Voelckel, Wolfgang G; Hörmann, Christoph; Zecha-Stallinger, Angelika; Wenzel, Volker

    2004-11-01

    The strategies to ensure safety during ventilation of an unprotected airway are limiting airway pressure and/or inspiratory flow. In this prospective, randomized study we assessed the effect of face mask ventilation with small tidal volumes in the modified mouth-to-bag resuscitator (maximal volume, 500 mL) versus a pediatric self-inflatable bag versus automatic pressure-controlled ventilation in 40 adult apneic patients during induction of anesthesia. The mouth-to-bag resuscitator requires the rescuer to blow up a balloon inside the self-inflating bag that subsequently displaces air which then flows into the patient's airway. Respiratory variables were measured with a pulmonary monitor (CP-100). Mouth-to-bag resuscitator and pressure-controlled ventilation resulted in significantly lower (mean +/- sd) peak airway pressure (8 +/- 2 and 8 +/- 1 cm H(2)O), peak inspiratory flow rate (0.7 +/- 0.1 and 0.7 +/- 0.1 L/s), and larger inspiratory time fraction (33% +/- 5% and 47% +/- 2%) in comparison to pediatric self-inflating bag ventilation (12 +/- 3 cm H(2)O; 1 +/- 0.2 L/s; 27% +/- 4%; all P < 0.001). The tidal volumes were similar between groups. No stomach inflation occurred in either group. We conclude that using a modified mouth-to-bag resuscitator or automatic pressure-controlled ventilation with similar small tidal volumes during face mask ventilation resulted in an approximately 25% reduction in peak airway pressure when compared with a standard pediatric self-inflating bag. PMID:15502057

  4. BAG: A code for predicting the performance of a gas bag impact attenuation system for the PATHFINDER lander

    SciTech Connect

    Cole, J.K.; Waye, D.E.

    1993-11-01

    The National Aeronautics and Space Administration (NASA) is planning to launch a network of scientific probes to Mars beginning in late 1996. The precursor to this network will be PATHFINDER. Decelerating PATHFINDER from the high speed of its approach to Mars will require the use of several deceleration techniques working in series. The Jet Propulsion Laboratory (JPL) has proposed that gas bags be used to cushion the payload`s ground impact on Mars. This report presents the computer code, BAG, which has been developed to calculate the pneumatic performance of gas bag impact attenuators and the one-dimensional rigid-body dynamic performance of a payload during ground impact.

  5. Self-Deployable Membrane Structures

    NASA Technical Reports Server (NTRS)

    Sokolowski, Witold M.; Willis, Paul B.; Tan, Seng C.

    2010-01-01

    Currently existing approaches for deployment of large, ultra-lightweight gossamer structures in space rely typically upon electromechanical mechanisms and mechanically expandable or inflatable booms for deployment and to maintain them in a fully deployed, operational configuration. These support structures, with the associated deployment mechanisms, launch restraints, inflation systems, and controls, can comprise more than 90 percent of the total mass budget. In addition, they significantly increase the stowage volume, cost, and complexity. A CHEM (cold hibernated elastic memory) membrane structure without any deployable mechanism and support booms/structure is deployed by using shape memory and elastic recovery. The use of CHEM micro-foams reinforced with carbon nanotubes is considered for thin-membrane structure applications. In this advanced structural concept, the CHEM membrane structure is warmed up to allow packaging and stowing prior to launch, and then cooled to induce hibernation of the internal restoring forces. In space, the membrane remembers its original shape and size when warmed up. After the internal restoring forces deploy the structure, it is then cooled to achieve rigidization. For this type of structure, the solar radiation could be utilized as the heat energy used for deployment and space ambient temperature for rigidization. The overall simplicity of the CHEM self-deployable membrane is one of its greatest assets. In present approaches to space-deployable structures, the stow age and deployment are difficult and challenging, and introduce a significant risk, heavy mass, and high cost. Simple procedures provided by CHEM membrane greatly simplify the overall end-to-end process for designing, fabricating, deploying, and rigidizing large structures. The CHEM membrane avoids the complexities associated with other methods for deploying and rigidizing structures by eliminating deployable booms, deployment mechanisms, and inflation and control systems

  6. Color Based Bags-of-Emotions

    NASA Astrophysics Data System (ADS)

    Solli, Martin; Lenz, Reiner

    In this paper we describe how to include high level semantic information, such as aesthetics and emotions, into Content Based Image Retrieval. We present a color-based emotion-related image descriptor that can be used for describing the emotional content of images. The color emotion metric used is derived from psychophysical experiments and based on three variables: activity, weight and heat. It was originally designed for single-colors, but recent research has shown that the same emotion estimates can be applied in the retrieval of multi-colored images. Here we describe a new approach, based on the assumption that perceived color emotions in images are mainly affected by homogenous regions, defined by the emotion metric, and transitions between regions. RGB coordinates are converted to emotion coordinates, and for each emotion channel, statistical measurements of gradient magnitudes within a stack of low-pass filtered images are used for finding interest points corresponding to homogeneous regions and transitions between regions. Emotion characteristics are derived for patches surrounding each interest point, and saved in a bag-of-emotions, that, for instance, can be used for retrieving images based on emotional content.

  7. Field Deployable DNA analyzer

    SciTech Connect

    Wheeler, E; Christian, A; Marion, J; Sorensen, K; Arroyo, E; Vrankovich, G; Hara, C; Nguyen, C

    2005-02-09

    This report details the feasibility of a field deployable DNA analyzer. Steps for swabbing cells from surfaces and extracting DNA in an automatable way are presented. Since enzymatic amplification reactions are highly sensitive to environmental contamination, sample preparation is a crucial step to make an autonomous deployable instrument. We perform sample clean up and concentration in a flow through packed bed. For small initial samples, whole genome amplification is performed in the packed bed resulting in enough product for subsequent PCR amplification. In addition to DNA, which can be used to identify a subject, protein is also left behind, the analysis of which can be used to determine exposure to certain substances, such as radionuclides. Our preparative step for DNA analysis left behind the protein complement as a waste stream; we determined to learn if the proteins themselves could be analyzed in a fieldable device. We successfully developed a two-step lateral flow assay for protein analysis and demonstrate a proof of principle assay.

  8. ALMR deployment economic analysis

    SciTech Connect

    Delene, J.G.; Fuller, L.C.; Hudson, C.R.

    1993-06-01

    This analysis seeks to model and evaluate the economics of the use of Advanced Liquid Metal Reactors (ALMR) as a component of this country`s future electricity generation mix. The ALMR concept has the ability to utilize as fuel the fissile material contained in previously irradiated nuclear fuel (i.e., spent fuel). While not a requirement for the successful deployment of ALMR power plant technology, the reprocessing of spent fuel from light water reactors (LWR) is necessary for any rapid introduction of ALMR power plants. In addition, the reprocessing of LWR spent fuel may reduce the number of high level waste repositories needed in the future by burning the long-lived actinides produced in the fission process. With this study, the relative economics of a number of potential scenarios related to these issues are evaluated. While not encompassing the full range of all possibilities, the cases reported here provide an indication of the potential costs, timings, and relative economic attractiveness of ALMR deployment.

  9. 50 CFR 622.39 - Bag and possession limits.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Federal Register citations affecting § 622.39, see the List of CFR Sections Affected, which appears in the...) Atlantic dolphin and wahoo. Bag and possession limits are as follows: (1) Dolphin—10, not to exceed 60...

  10. Is the Capsular Bag Perimeter Round or Elliptical?

    PubMed Central

    Amigó, Alfredo; Bonaque-González, Sergio

    2016-01-01

    Purpose: To report findings that could suggest an elliptical shape of the capsular bag. Methods: Five eyes of three patients with axial length greater than 24 mm underwent phacoemulsification cataract surgery with plate-haptic multifocal toric intraocular lens (IOL) implantation oriented in the vertical meridian. Results: In all cases, correct orientation of the IOLs was verified 30 minutes after surgery. After 24 hours, all eyes demonstrated unwanted rotation of the IOLs ranging from 15 to 45 degrees. The IOLs remained stable in the new position in all cases until adhesion of the capsular bag took place. Conclusion: These observations could suggest that the perimeter of the capsular bag has an elliptical shape. Therefore, the IOL tends to become fixated in a meridian of the capsular bag that best fits the diagonal diameter of the IOL. PMID:27413495

  11. Transcriptional upregulation of BAG3 upon proteasome inhibition

    SciTech Connect

    Wang Huaqin Liu Haimei; Zhang Haiyan; Guan Yifu; Du Zhenxian

    2008-01-11

    Proteasome inhibitors exhibit antitumoral activity against malignancies of different histology. Emerging evidence indicates that antiapoptotic factors may also accumulate as a consequence of exposure to these drugs, thus it seems plausible that activation of survival signaling cascades might compromise their antitumoral effects. Bcl-2-associated athanogene (BAG) family proteins are characterized by their property of interaction with a variety of partners involved in modulating the proliferation/death balance, including heat shock proteins (HSP), Bcl-2, Raf-1. In this report, we demonstrated that BAG3 is a novel antiapoptotic molecule induced by proteasome inhibitors in various cancer cells at the transcriptional level. Moreover, we demonstrated that BAG3 knockdown by siRNA sensitized cancer cells to MG132-induced apoptosis. Taken together, our results suggest that BAG3 induction might represents as an unwanted molecular consequence of utilizing proteasome inhibitors to combat tumors.

  12. View of concrete sand bag form concentration in the Merry ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of concrete sand bag form concentration in the Merry Generator House Southeast corner, looking north - Arthur Holmes Merry Generator House, Signal Lake North of Range Road, Fort Gordon, Richmond County, GA

  13. View of North half of concrete sand bag form concentration ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of North half of concrete sand bag form concentration in the Merry Generator House southeast corner, looking east - Arthur Holmes Merry Generator House, Signal Lake North of Range Road, Fort Gordon, Richmond County, GA

  14. View of South half of concrete sand bag form concentration ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of South half of concrete sand bag form concentration in the Merry Generator House Southeast corner, ooking east - Arthur Holmes Merry Generator House, Signal Lake North of Range Road, Fort Gordon, Richmond County, GA

  15. Deformation of the Bag Skirt of ACV in Heave Motion

    NASA Astrophysics Data System (ADS)

    Senba, Hiromitsu; Matsuo, Hideo; Ishikawa, Hiroyuki; Yoshimoto, Shintarou; Hiroe, Tetsuyuki; Fujiwara, Kazuhito

    A method to predict the change of the cushion pressure and the bag skirt configuration of ACV in heave is proposed. It is a quasistatic analysis based on the analysis of the skirt configuration in static operation that was proposed by the present authors. The cushion pressure depends on the velocity of motion as well as the hoverheight. It is higher in the downward motion than in the upward motion with the same hoverheight. As the model approaches the ground surface, the bag skirt is pushed outwards and also upwards but the hoverheight still decreases. This produces the increase of the cushion pressure that also flattened the configuration of the bag. The outward displacement of the bag produces the additional increase of the cushion base area and increases the restoring force. The stability is then increased.

  16. 5. Photocopy of a section of the bag house from ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Photocopy of a section of the bag house from J.L. Bray, The Principles of Metallurgy, Ginn & Co. . New York, 1929. - International Smelting & Refining Company, Tooele Smelter, Blast Furnace Building, State Route 178, Tooele, Tooele County, UT

  17. Lab Creates 'Fake Vomit' To Test Space Trash Bag

    NASA Video Gallery

    After answering the question of how the space potty works, astronaut Mike Massimino now visits a NASA lab where chemists have been working hard to develop a next-generation trash bag for future exp...

  18. Bag-model quantum chromodynamics for hyperons at low energy

    NASA Astrophysics Data System (ADS)

    Weber, H. J.; Maslow, J. N.

    1980-09-01

    In a non-perturbative bag model framework, gluon exchange which mediates quark exchange scattering in conjunction with quark interchange is shown to be the basis of the OBE interactions of hyperons at low energy.

  19. Director von Braun Presents General Medaris With Golf Bag

    NASA Technical Reports Server (NTRS)

    1959-01-01

    Marshall Space Flight Center Director Wernher von Braun presents General J.B. Medaris with a new golf bag. General Medaris, (left) was a Commander of the Army Ballistic Missile Agency (ABMA) in Redstone Arsenal, Alabama during 1955 to 1958.

  20. An experimental study of permeability within an out-of-autoclave vacuum-bag-only CFRP laminate

    NASA Astrophysics Data System (ADS)

    Wallace, Landon F.

    The out-of-autoclave vacuum-bag-only (OOA-VBO) manufacturing process is a process that eliminates an autoclave when manufacturing aerospace quality carbon fiber reinforced plastics (CFRP). OOA-VBO pre-impregnated resin tow systems rely on air channel networks that guide unwanted voids out of the laminate. The air path networks can be characterized by measuring the permeability of a pre-cured laminate. Permeability results were successfully obtained for a laminate with a compaction similar to that found in a typical vacuum bagging setup. A study was done to find the relationship between compaction of the laminate and permeability. Permeability was measured as the laminate cured, using a constant temperature ramp rate. An experimental nodal analysis was performed to find the permeability at the midpoint of the in-plane direction.

  1. The spin bag mechanism of high temperature superconductivity

    NASA Technical Reports Server (NTRS)

    Schrieffer, J. R.; Wen, X.-G.; Zhang, S.-C.

    1989-01-01

    In oxide superconductors the local suppression of antiferromagnetic correlations in the vicinity of a hole lowers the energy of the system. This quasi two-dimensional bag of weakened spin order follows the hole in its motion. In addition, holes prefer to share a bag, leading to a strong pairing attraction and a high Tc superconductivity. There are many experimental consequences of this mechanism for both the superconducting and normal phases.

  2. BAG3: a new player in the heart failure paradigm.

    PubMed

    Knezevic, Tijana; Myers, Valerie D; Gordon, Jennifer; Tilley, Douglas G; Sharp, Thomas E; Wang, JuFang; Khalili, Kamel; Cheung, Joseph Y; Feldman, Arthur M

    2015-07-01

    BAG3 is a cellular protein that is expressed predominantly in skeletal and cardiac muscle but can also be found in the brain and in the peripheral nervous system. BAG3 functions in the cell include: serving as a co-chaperone with members of the heat-shock protein family of proteins to facilitate the removal of misfolded and degraded proteins, inhibiting apoptosis by interacting with Bcl2 and maintaining the structural integrity of the Z-disk in muscle by binding with CapZ. The importance of BAG3 in the homeostasis of myocytes and its role in the development of heart failure was evidenced by the finding that single allelic mutations in BAG3 were associated with familial dilated cardiomyopathy. Furthermore, significant decreases in the level of BAG3 have been found in end-stage failing human heart and in animal models of heart failure including mice with heart failure secondary to trans-aortic banding and in pigs after myocardial infarction. Thus, it becomes relevant to understand the cellular biology and molecular regulation of BAG3 expression in order to design new therapies for the treatment of patients with both hereditary and non-hereditary forms of dilated cardiomyopathy. PMID:25925243

  3. Deployable Wireless Camera Penetrators

    NASA Technical Reports Server (NTRS)

    Badescu, Mircea; Jones, Jack; Sherrit, Stewart; Wu, Jiunn Jeng

    2008-01-01

    A lightweight, low-power camera dart has been designed and tested for context imaging of sampling sites and ground surveys from an aerobot or an orbiting spacecraft in a microgravity environment. The camera penetrators also can be used to image any line-of-sight surface, such as cliff walls, that is difficult to access. Tethered cameras to inspect the surfaces of planetary bodies use both power and signal transmission lines to operate. A tether adds the possibility of inadvertently anchoring the aerobot, and requires some form of station-keeping capability of the aerobot if extended examination time is required. The new camera penetrators are deployed without a tether, weigh less than 30 grams, and are disposable. They are designed to drop from any altitude with the boost in transmitting power currently demonstrated at approximately 100-m line-of-sight. The penetrators also can be deployed to monitor lander or rover operations from a distance, and can be used for surface surveys or for context information gathering from a touch-and-go sampling site. Thanks to wireless operation, the complexity of the sampling or survey mechanisms may be reduced. The penetrators may be battery powered for short-duration missions, or have solar panels for longer or intermittent duration missions. The imaging device is embedded in the penetrator, which is dropped or projected at the surface of a study site at 90 to the surface. Mirrors can be used in the design to image the ground or the horizon. Some of the camera features were tested using commercial "nanny" or "spy" camera components with the charge-coupled device (CCD) looking at a direction parallel to the ground. Figure 1 shows components of one camera that weighs less than 8 g and occupies a volume of 11 cm3. This camera could transmit a standard television signal, including sound, up to 100 m. Figure 2 shows the CAD models of a version of the penetrator. A low-volume array of such penetrator cameras could be deployed from an

  4. Complex Deployed Responsive Service

    NASA Astrophysics Data System (ADS)

    Parry, Glenn; McLening, Marc; Caldwell, Nigel; Thompson, Rob

    A pizza restaurant must provide product, in the form of the food and drink, and service in the way this is delivered to the customer. Providing this has distinct operational challenges, but what if the restaurant also provides a home delivery service? The service becomes deployed as the customer is no-longer co-located with the production area. The business challenge is complicated as service needs to be delivered within a geographic region, to time or the pizza will be cold, and within a cost that is not ­prohibitive. It must also be responsive to short term demand; needing to balance the number of staff it has available to undertake deliveries against a forecast of demand.

  5. Forward Deployed Robotic Unit

    NASA Astrophysics Data System (ADS)

    Brendle, Bruce E., Jr.; Bornstein, Jonathan A.

    2000-07-01

    Forward Deployed Robotic Unit (FDRU) is a core science and technology objective of the US Army, which will demonstrate the impact of autonomous systems on all phases of future land warfare. It will develop, integrate and demonstrate technology required to achieve robotic and fire control capabilities for future land combat vehicles, e.g., Future Combat Systems, using a system of systems approach that culminates in a field demonstration in 2005. It will also provide the required unmanned assets and conduct the demonstration. Battle Lab Warfighting Experiments and data analysis required to understand the effects of unmanned assets on combat operations. The US Army Tank- Automotive & Armaments Command and the US Army Research Laboratory are teaming in an effort to leverage prior technology achievements in the areas of autonomous mobility, architecture, sensor and robotics system integration; advance the state-of-the-art in these areas; and to provide field demonstration/application of the technologies.

  6. Deployable Heat Pipe Radiator

    NASA Technical Reports Server (NTRS)

    Edelstein, F.

    1975-01-01

    A 1.2- by 1.8-m variable conductance heat pipe radiator was designed, built, and tested. The radiator has deployment capability and can passively control Freon-21 fluid loop temperatures under varying loads and environments. It consists of six grooved variable conductance heat pipes attached to a 0.032-in. aluminum panel. Heat is supplied to the radiator via a fluid header or a single-fluid flexible heat pipe header. The heat pipe header is an artery design that has a flexible section capable of bending up to 90 degrees. Radiator loads as high as 850 watts were successfully tested. Over a load variation of 200 watts, the outlet temperature of the Freon-21 fluid varied by 7 F. An alternate control system was also investigated which used a variable conductance heat pipe header attached to the heat pipe radiator panel.

  7. Chronic Left Lower Lobe Pulmonary Infiltrates During Military Deployment.

    PubMed

    Hunninghake, John C; Skabelund, Andrew J; Morris, Michael J

    2016-08-01

    Deployment to Southwest Asia is associated with increased airborne hazards such as geologic dusts, burn pit smoke, vehicle exhaust, or air pollution. There are numerous ongoing studies to evaluate the potential effects of inhaled particulate matter on reported increases in acute and chronic respiratory symptoms. Providers need to be aware of potential causes of pulmonary disease such as acute eosinophilic pneumonia, asthma, and vocal cord dysfunction that have been associated with deployment. Other pulmonary disorders such as interstitial lung disease are infrequently reported. Not all deployment-related respiratory complaints may result from deployment airborne hazards and a broad differential should be considered. We present the case of a military member with a prolonged deployment found to have lobar infiltrates secondary to pulmonary vein stenosis from treatment for atrial fibrillation. PMID:27483542

  8. Determination of H{sub 2} Diffusion Rates through Various Closures on TRU Waste Bag-Out Bags

    SciTech Connect

    Phillip D. Noll, Jr.; E. Larry Callis; Kirsten M. Norman

    1999-06-01

    The amount of H{sub 2} diffusion through twist and tape (horse-tail), wire tie, plastic tie, and heat sealed closures on transuranic (TRU) waste bag-out bags has been determined. H{sub 2} diffusion through wire and plastic tie closures on TRU waste bag-out bags has not been previously characterized and, as such, TRU waste drums containing bags with these closures cannot be certified and/or shipped to the Waste Isolation Pilot Plant (WIPP). Since wire ties have been used at Los Alamos National Laboratory (LANL) from 1980 to 1991 and the plastic ties from 1991 to the present, there are currently thousands of waste drums that cannot be shipped to the WIPP site. Repackaging the waste would be prohibitively expensive. Diffusion experiments performed on the above mentioned closures show that the diffusion rates of plastic tie and horse-tail closures are greater than the accepted value presented in the TRU-PACT 11 Safety Analysis Report (SAR). Diffusion rates for wire tie closures are not statistically different from the SAR value. Thus, drums containing bags with these closures can now potentially be certified which would allow for their consequent shipment to WIPP.

  9. Deployable Fresnel Rings

    NASA Technical Reports Server (NTRS)

    Kennedy, Timothy F.; Fink, Patrick W.; Chu, Andrew W.; Lin, Gregory Y.

    2014-01-01

    Deployable Fresnel rings (DFRs) significantly enhance the realizable gain of an antenna. This innovation is intended to be used in combination with another antenna element, as the DFR itself acts as a focusing or microwave lens element for a primary antenna. This method is completely passive, and is also completely wireless in that it requires neither a cable, nor a connector from the antenna port of the primary antenna to the DFR. The technology improves upon the previous NASA technology called a Tri-Sector Deployable Array Antenna in at least three critical aspects. In contrast to the previous technology, this innovation requires no connector, cable, or other physical interface to the primary communication radio or sensor device. The achievable improvement in terms of antenna gain is significantly higher than has been achieved with the previous technology. Also, where previous embodiments of the Tri-Sector antenna have been constructed with combinations of conventional (e.g., printed circuit board) and conductive fabric materials, this innovation is realized using only conductive and non-conductive fabric (i.e., "e-textile") materials, with the possible exception of a spring-like deployment ring. Conceptually, a DFR operates by canceling the out-of-phase radiation at a plane by insertion of a conducting ring or rings of a specific size and distance from the source antenna, defined by Fresnel zones. Design of DFRs follow similar procedures to those outlined for conventional Fresnel zone rings. Gain enhancement using a single ring is verified experimentally and through computational simulation. The experimental test setup involves a microstrip patch antenna that is directly behind a single-ring DFR and is radiating towards a second microstrip patch antenna. The first patch antenna and DFR are shown. At 2.42 GHz, the DFR improves the transmit antenna gain by 8.6 dB, as shown in Figure 2, relative to the wireless link without the DFR. A figure illustrates the

  10. Introduction to deployable recovery systems

    SciTech Connect

    Meyer, J.

    1985-08-01

    This report provides an introduction to deployable recovery systems for persons with little or no background in parachutes but who are knowledgeable in aerodynamics. A historical review of parachute development is given along with a description of the basic components of most deployable recovery systems. Descriptions are given of the function of each component and of problems that occur if a component fails to perform adequately. Models are presented for deployable recovery systems. Possible directions for future work are suggested in the summary.

  11. A Lightweight Vertical Rosette for Deployment in Ice Covered Water

    NASA Astrophysics Data System (ADS)

    Smethie, W. M.; Chayes, D. N.; Perry, R. S.; Schlosser, P.

    2009-12-01

    Although remote sensing technology provides measurement capability for a number of water properties, there are important substances for which this technology does not currently exist and the only way to measure these substances is to collect water samples and return the samples to the lab. In the Arctic Ocean water samples are difficult to obtain from ships because of the extensive ice cover and thick pressure ridges. However, the ice provides a landing platform for aircraft, which can rapidly cover long distances. Aircraft have been used for sampling the Arctic Ocean for the past half-century using bottles and internally recording CTDs attached to a cable and lowered through leads or holes drilled in the ice. The routine CTD/rosette technology used for sampling from ships measures profiles of temperature, salinity, oxygen as well as other substances in situ, displays the data in real time for choosing depths to obtain water samples and the water samples are then collected with the rosette. These systems are too heavy and bulky to deploy from aircraft. We have developed a lightweight modular CTD/rosette system that is deployed through a 12-inch diameter hole drilled in the ice. The modules are connected together physically and electrically with the water bottle modules, which contain four 4-liter bottles each, stacked on top of the CTD module. The CTD traces are displayed on a laptop computer and the bottles are tripped using modified Seabird controllers and a melt-lanyard tripping mechanism. We have used this system for several years with Twin Otter fixed wing aircraft as part of the Switchyard Project, sampling a line of stations annually in the heavily ice covered region between Alert and the North Pole. Casts are carried out in a tent connected to the airplane using a lightweight winch mounted in the airplane. At the completion of a cast, the water modules are placed in a cooler with bags of snow to provide thermal stability at about 0°C and the end caps

  12. Review of Various Air Sampling Methods for Solvent Vapors.

    ERIC Educational Resources Information Center

    Maykoski, R. T.

    Vapors of trichloroethylene, toluene, methyl ethyl ketone, and butyl cellosolve in air were collected using Scotchpac and Tedlar bags, glass prescription bottles, and charcoal adsorption tubes. Efficiencies of collection are reported. (Author/RH)

  13. 76 FR 33402 - Tesla Motors, Inc.; Receipt of Petition for Renewal of Temporary Exemption from the Advanced Air...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-08

    ... crashes. \\2\\ See 65 FR 30680 (May 12, 2000). The issuance of the advanced air bag requirements was a... developing advanced air bag systems. \\3\\ See, e.g., grant of petition to Panoz, 72 FR 28759 (May 22, 2007), or grant of petition to Koenigsegg, 72 FR 17608 (April 9, 2007). Notwithstanding those...

  14. Two Concepts for Deployable Trusses

    NASA Technical Reports Server (NTRS)

    Renfro, John W.

    2010-01-01

    Two concepts that could be applied separately or together have been suggested to enhance the utility of deployable truss structures. The concepts were intended originally for application to a truss structure to be folded for compact stowage during transport and subsequently deployed in outer space. The concepts may also be applicable, with some limitations, to deployable truss structures designed to be used on Earth. The first concept involves a combination of features that would help to maximize reliability of a structure while minimizing its overall mass, the complexity of its deployment system, and the expenditure of energy for deployment. The deployment system would be integrated into the truss: some of the truss members would contain folding/unfolding-detent mechanisms similar to those in umbrellas; other truss members would contain shape-memory-alloy (SMA) coil actuators (see Figure 1). Upon exposure to sunlight, the SMA actuators would be heated above their transition temperature, causing them to extend to their deployment lengths. The extension of the actuators would cause the structure to unfold and, upon completion of unfolding, the umbrellalike mechanisms would lock the unfolded truss in the fully deployed configuration. The use of solar heating to drive deployment would eliminate the need to carry a deployment power source. The actuation scheme would offer high reliability in that the truss geometry would be such that deployment could be completed even if all actuators were not functioning. Of course, in designing for operation in normal Earth gravitation, it would be necessary to ensure that the SMA actuators could apply forces large enough to overcome the deploymentresisting forces attributable to the weights of the members. The second concept is that of an improved design for the joints in folding members. Before describing this design,

  15. Rapidly Deployed Modular Telemetry System

    NASA Technical Reports Server (NTRS)

    Varnavas, Kosta A. (Inventor); Sims, William Herbert, III (Inventor)

    2013-01-01

    The present invention is a telemetry system, and more specifically is a rapidly deployed modular telemetry apparatus which utilizes of SDR technology and the FPGA programming capability to reduce the number of hardware components and programming required to deploy a telemetry system.

  16. Tedlar bag sampling technique for vertical profiling of carbon dioxide through the atmospheric boundary layer with high precision and accuracy.

    PubMed

    Schulz, Kristen; Jensen, Michael L; Balsley, Ben B; Davis, Kenneth; Birks, John W

    2004-07-01

    Carbon dioxide is the most important greenhouse gas other than water vapor, and its modulation by the biosphere is of fundamental importance to our understanding of global climate change. We have developed a new technique for vertical profiling of CO2 and meteorological parameters through the atmospheric boundary layer and well into the free troposphere. Vertical profiling of CO2 mixing ratios allows estimates of landscape-scale fluxes characteristic of approximately100 km2 of an ecosystem. The method makes use of a powered parachute as a platform and a new Tedlar bag air sampling technique. Air samples are returned to the ground where measurements of CO2 mixing ratios are made with high precision (< or =0.1%) and accuracy (< or =0.1%) using a conventional nondispersive infrared analyzer. Laboratory studies are described that characterize the accuracy and precision of the bag sampling technique and that measure the diffusion coefficient of CO2 through the Tedlar bag wall. The technique has been applied in field studies in the proximity of two AmeriFlux sites, and results are compared with tower measurements of CO2. PMID:15296321

  17. Gyrokinetic modeling: A multi-water-bag approach

    SciTech Connect

    Morel, P.; Gravier, E.; Besse, N.; Klein, R.; Ghizzo, A.; Bertrand, P.; Garbet, X.; Ghendrih, P.; Grandgirard, V.; Sarazin, Y.

    2007-11-15

    Predicting turbulent transport in nearly collisionless fusion plasmas requires one to solve kinetic (or, more precisely, gyrokinetic) equations. In spite of considerable progress, several pending issues remain; although more accurate, the kinetic calculation of turbulent transport is much more demanding in computer resources than fluid simulations. An alternative approach is based on a water-bag representation of the distribution function that is not an approximation but rather a special class of initial conditions, allowing one to reduce the full kinetic Vlasov equation into a set of hydrodynamic equations while keeping its kinetic character. The main result for the water-bag model is a lower cost in the parallel velocity direction since no differential operator associated with some approximate numerical scheme has to be carried out on this variable v{sub parallel}. Indeed, a small bag number is sufficient to correctly describe the ion temperature gradient instability.

  18. Field testing of passive diffusion bag samplers for volatile organic compound concentrations in ground water, Naval Industrial Reserve Ordnance Plant, Fridley, Minnesota, November 1999 and May 2000

    USGS Publications Warehouse

    Vroblesky, Don A.; Petkewich, Matthew D.

    2000-01-01

    Volatile organic compound concentrations from passive diffusion bag samplers were compared with concentrations from conventional purge (three or more casing volumes) sampling and low-flow purge sampling in side-by-side tests in 17 wells at the Naval Industrial Reserve Ordnance Plant, in Fridley, Minnesota. An initial comparison of 1,2-dichloroethene and trichloroethene concentrations obtained by using passive diffusion bag samplers and the conventional purge method in wells where one passive diffusion bag sampler was deployed showed good agreement at several wells but poor agreement at others. Collection of data from multiple diffusion samplers during the conventional purge sampling and during the low-flow sampling, however, suggests that the volatile organic compound concentrations from the passive diffusion bag samplers accurately reflect the volatile organic compound distribution in the screened interval, whereas the conventional purge and low-flow purge samples reflect mixing during pumping. The data also show that contaminant stratification was present in some wells. In one well, trichloroethene concentrations ranged from 470 to 1,600 micrograms per liter over a vertical distance of approximately 6 feet.

  19. Air: Simple Experiments for Young Scientists.

    ERIC Educational Resources Information Center

    White, Larry

    This book contains simple experiments through which students explore air and its properties. Some of the topics discussed include alternative energy, bacteria, carbon dioxide, motion, weather, and flight. Experiments include: blowing a balloon up in a bottle; seeing air in water; making a lunch-bag kite, weather vanes, and paper glider;…

  20. Deployment simulation of a deployable reflector for earth science application

    NASA Astrophysics Data System (ADS)

    Wang, Xiaokai; Fang, Houfei; Cai, Bei; Ma, Xiaofei

    2015-10-01

    A novel mission concept namely NEXRAD-In-Space (NIS) has been developed for monitoring hurricanes, cyclones and other severe storms from a geostationary orbit. It requires a space deployable 35-meter diameter Ka-band (35 GHz) reflector. NIS can measure hurricane precipitation intensity, dynamics and its life cycle. These information is necessary for predicting the track, intensity, rain rate and hurricane-induced floods. To meet the requirements of the radar system, a Membrane Shell Reflector Segment (MSRS) reflector technology has been developed and several technologies have been evaluated. However, the deployment analysis of this large size and high-precision reflector has not been investigated. For a pre-studies, a scaled tetrahedral truss reflector with spring driving deployment system has been made and tested, deployment dynamics analysis of this scaled reflector has been performed using ADAMS to understand its deployment dynamic behaviors. Eliminating the redundant constraints in the reflector system with a large number of moving parts is a challenging issue. A primitive joint and flexible struts were introduced to the analytical model and they can effectively eliminate over constraints of the model. By using a high-speed camera and a force transducer, a deployment experiment of a single-bay tetrahedral module has been conducted. With the tested results, an optimization process has been performed by using the parameter optimization module of ADAMS to obtain the parameters of the analytical model. These parameters were incorporated to the analytical model of the whole reflector. It is observed from the analysis results that the deployment process of the reflector with a fixed boundary experiences three stages. These stages are rapid deployment stage, slow deployment stage and impact stage. The insight of the force peak distributions of the reflector can help the optimization design of the structure.

  1. Spin-bag mechanism of high-temperature superconductivity

    NASA Technical Reports Server (NTRS)

    Schrieffer, J. R.; Wen, X.-G.; Zhang, S.-C.

    1988-01-01

    A new approach to the theory of high-temperature superconductivity is proposed, based on the two-dimensional antiferromagnetic spin correlations observed in these materials over distances large compared to the lattice spacing. The spin ordering produces an electronic pseudogap which is locally suppressed by the addition of a hole. This suppression forms a bag inside which the hole is self-consistently trapped. Two holes are attracted by sharing a common bag. The resulting pairing interaction leads to a superconducting energy gap which is nodeless over the Femri surface.

  2. Transverse momentum dependent distribution functions in the bag model

    SciTech Connect

    Harut A. Avakian; Efremov, A. V.; Schweitzer, P.; Yuan, F.

    2010-04-01

    Leading and subleading twist transverse momentum dependent parton distribution functions (TMDs) are studied in a quark model framework provided by the bag model. A complete set of relations among different TMDs is derived, and the question is discussed how model-(in)dependent such relations are. A connection of the pretzelosity distribution and quark orbital angular momentum is derived. Numerical results are presented, and applications for phenomenology discussed. In particular, it is shown that in the valence-x region the bag model supports a Gaussian Ansatz for the transverse momentum dependence of TMDs.

  3. Linearized theory of inhomogeneous multiple 'water-bag' plasmas

    NASA Technical Reports Server (NTRS)

    Bloomberg, H. W.; Berk, H. L.

    1973-01-01

    Equations are derived for describing the inhomogeneous equilibrium and small deviations from the equilibrium, giving particular attention to systems with trapped particles. An investigation is conducted of periodic systems with a single trapped-particle water bag, taking into account the behavior of the perturbation equations at the turning points. An outline is provided concerning a procedure for obtaining the eigenvalues. The results of stability calculations connected with the sideband effects are considered along with questions regarding the general applicability of the multiple water-bag approach in stability calculations.

  4. [Purple urine bag syndrome in two institutionalised patients].

    PubMed

    Iglesias Barreira, Rebeca; Albiñana Pérez, M Sandra; Rodríguez Penín, Isaura; Bilbao Salcedo, José

    2013-01-01

    Purple urine bag syndrome (PUBS) is an uncommon but particularly striking phenomenon characterised by a chemical reaction involving the urine, plastic and certain enzymes from some sulphatase- and phosphatase-producing bacteria, including Proteus mirabilis, Escherichia coli and Morganella morganii, amongst others. Following this reaction, the catheter and the bag may be stained red, blue or purple. This phenomenon tends to occur in patients with multiple pathology and with urinary catheters, as part of a urinary tract infection. We describe two clinical cases of PUBS in institutionalised patients with permanent urinary catheters. PMID:23199817

  5. Transverse momentum dependent distribution functions in the bag model

    SciTech Connect

    Avakian, H.; Efremov, A. V.; Schweitzer, P.; Yuan, F.

    2010-04-01

    Leading and subleading-twist transverse momentum dependent parton distribution functions (TMDs) are studied in a quark-model framework provided by the bag model. A complete set of relations among different TMDs is derived, and the question is discussed how model (in)dependent such relations are. A connection of the pretzelosity distribution and quark orbital angular momentum is derived. Numerical results are presented, and applications for phenomenology are discussed. In particular, it is shown that in the valence-x region the bag model supports a Gaussian Ansatz for the transverse momentum dependence of TMDs.

  6. The transverse momentum dependent distribution functions in the bag model

    SciTech Connect

    Avakian, Harut; Efremov, Anatoly; Schweitzer, Peter; Yuan, Feng

    2010-01-29

    Leading and subleading twist transverse momentum dependent parton distribution functions (TMDs) are studied in a quark model framework provided by the bag model. A complete set of relations among different TMDs is derived, and the question is discussed how model-(in)dependent such relations are. A connection of the pretzelosity distribution and quark orbital angular momentum is derived. Numerical results are presented, and applications for phenomenology discussed. In particular, it is shown that in the valence-x region the bag model supports a Gaussian Ansatz for the transverse momentum dependence of TMDs.

  7. 40. BUILDING NO. 454, ORDNANCE FACILITY (BAG CHANGE FILLING PLANT), ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    40. BUILDING NO. 454, ORDNANCE FACILITY (BAG CHANGE FILLING PLANT), DETAIL SOUTHEAST SIDE OF EXTERIOR ELECTRICAL EQUIPMENT ROOM, SHOWING DOOR TO SEWING ROOM NO. 3, VENTILATOR FAN (OVER DOOR), STEAM LINE (PIPE), SEWING MACHINE MOTOR IN OVERHEAD, ALARM BELL, EXPLOSION-PROOF SWITCH BOXES, GROUNDS ON DOORS, PULL ALARM HANDLE (EXTREME RIGHT; PULLEY CABLE CONDUCTED IN CONDUIT TO SWITCH INSIDE BUILDING. PULLEYS INSIDE ALL ELBOW JOINTS.) - Picatinny Arsenal, 400 Area, Gun Bag Loading District, State Route 15 near I-80, Dover, Morris County, NJ

  8. NN interaction from bag-model quark interchange

    NASA Astrophysics Data System (ADS)

    Bakker, B. L. G.; Bozoian, M.; Maslow, J. N.; Weber, H. J.

    1982-03-01

    A partial-wave helicity-state analysis of elastic nucleon-nuclon scattering is carried out in momentum space. Its basis is a one- and two-boson exchange amplitude from a bag-model quark interchange mechanism. The resulting phase shifts and bound-state parameters of the deuteron are compared with other meson theoretic potentials and data up to laboratory energies of ~350 MeV. NUCLEAR REACTIONS NN elastic scattering, Elab<=350 MeV. Coupling constants, form factors of renormalized OBE calculated from bag-model quark interchange. Phase shifts, deuteron parameters calculated from covariant partial-wave analysis.

  9. Legitimization of regulatory norms: Waterfowl hunter acceptance of changing duck bag limits

    USGS Publications Warehouse

    Schroeder, Susan A.; Fulton, David C.; Lawrence, Jeffrey S.; Cordts, Steven D.

    2014-01-01

    Few studies have examined response to regulatory change over time, or addressed hunter attitudes about changes in hunting bag limits. This article explores Minnesota waterfowl hunters’ attitudes about duck bag limits, examining attitudes about two state duck bag limits that were initially more restrictive than the maximum set by the U.S. Fish and Wildlife Service (USFWS), but then increased to match federal limits. Results are from four mail surveys that examined attitudes about bag limits over time. Following two bag limit increases, a greater proportion of hunters rated the new bag limit “too high” and a smaller proportion rated it “too low.” Several years following the first bag limit increase, the proportion of hunters who indicated that the limit was “too high” had declined, suggesting hunter acceptance of the new regulation. Results suggest that waterfowl bag limits may represent legal norms that influence hunter attitudes and gain legitimacy over time.

  10. Heavy metal content in rubbish bags used for separate collection of biowaste.

    PubMed

    Huerta-Pujol, Oscar; Soliva, Montserrat; Giró, Francesc; López, Marga

    2010-01-01

    The heavy metal content of several rubbish bags used to collect the organic fraction of municipal solid waste (OFMSW) is shown in this paper. Nowadays, several public awareness campaigns carried out by municipalities have promoted rubbish bags based mainly on their appearance, without concern for their heavy metal content. A high amount of heavy metals was detected in some polyethylene bags promoted in different campaigns for OFMSW source-sorted collection, while compostable bags presented low quantities of heavy metals. Some other rubbish bags, as well as commercial bags, were also analysed for comparison. These results should be taken into account before promoting the use of one or other type of bag. Moreover, the rubbish bag manufacturers should reduce the heavy metal content in order to avoid heavy metal scattering in the environment, and also to reduce the consumption of raw materials. PMID:20400284

  11. Comparisons of the effects of a foam pad, mung bean bag, and plastic bead bag on postural stability disturbance in healthy young adults

    PubMed Central

    Siriphorn, Akkradate; Chamonchant, Dannaovarat; Boonyong, Sujitra

    2016-01-01

    [Purpose] The aim of the present study was to compare the effects of unstable support surfaces, i.e. foam pad, mung bean bag, and plastic bead bag, on postural stability disturbance. [Subjects and Methods] Twenty-two healthy young adults (11 male and 11 female; aged 21.09 ± 1.44 years; BMI 20.40 ± 1.40 kg/m2) participated in the study. The Balance Master™ was used to evaluate the limit of stability and the unilateral stance performance. Each participant was assessed while standing on the following surfaces: 1) a firm surface, 2) a foam pad, 3) a mung bean bag, and 4) a plastic bead bag. The order of surfaces was randomly assigned. [Results] The mung bean bag and plastic bead bag showed greater disturbances in limit of stability and unilateral stance than the foam pad. There was no significant difference in postural stability disturbance between the mung bean bag and plastic bead bag. [Conclusion] These results suggested that both the mung bean bag and plastic bead bag could be used as a low-cost tool for balance assessment instead of a foam pad in healthy young adults. PMID:27065085

  12. Influence of operating parameters on cake formation in pilot scale pulse-jet bag filter.

    PubMed

    Saleem, Mahmood; Krammer, Gernot; Khan, Rafi Ullah; Tahir, M Suleman

    2012-07-01

    Bag filters are commonly used for fine particles removal in off-gas purification. There dust laden gas pervades through permeable filter media starting at a lower pressure drop limit leaving dust (called filter cake) on the filter media. The filter cakeformation is influenced by many factors including filtration velocity, dust concentration, pressure drop limits, and filter media resistance. Effect of the stated parameters is investigated experimentally in a pilot scale pulse-jet bag filter test facility where lime stone dust is separated from air at ambient conditions. Results reveal that filtration velocity significantly affects filter pressure drop as well as cake properties; cake density and specific cake resistance. Cake density is slightly affected by dust concentration. Specific resistance of filter cake increases with velocity, slightly affected by dust concentration, changes inversely with the upper pressure drop limit and decreases over a prolonged use (aging). Specific resistance of filter media is independent of upper pressure drop limit and increases linearly over a prolonged use. PMID:24415802

  13. 50 CFR 622.39 - Bag and possession limits.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... affecting § 622.39, see the List of CFR Sections Affected, which appears in the Finding Aids section of the... person or, if more than 4 persons are aboard, 12 per boat. (f) Atlantic dolphin and wahoo. Bag and possession limits are as follows: (1) Dolphin—10, not to exceed 60 per vessel, whichever is less, except,...

  14. 50 CFR 622.39 - Bag and possession limits.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... affecting § 622.39, see the List of CFR Sections Affected, which appears in the Finding Aids section of the... person or, if more than 4 persons are aboard, 12 per boat. (f) Atlantic dolphin and wahoo. Bag and possession limits are as follows: (1) Dolphin—10, not to exceed 60 per vessel, whichever is less, except,...

  15. Gyro-water-bag approach in nonlinear gyrokinetic turbulence

    SciTech Connect

    Besse, Nicolas Bertrand, Pierre

    2009-06-20

    Turbulent transport is a key issue for controlled thermonuclear fusion based on magnetic confinement. The thermal confinement of a magnetized fusion plasma is essentially determined by the turbulent heat conduction across the equilibrium magnetic field. It has long been acknowledged, that the prediction of turbulent transport requires to solve Vlasov-type gyrokinetic equations. Although the kinetic description is more accurate than fluid models (MHD, gyro-fluid), because among other things it takes into account nonlinear resonant wave-particle interaction, kinetic modeling has the drawback of a huge computer resource request. An unifying approach consists in considering water-bag-like weak solutions of kinetic collisionless equations, which allow to reduce the full kinetic Vlasov equation into a set of hydrodynamic equations, while keeping its kinetic behaviour. As a result this exact reduction induces a multi-fluid numerical resolution cost. Therefore finding water-bag-like weak solutions of the gyrokinetic equations leads to the birth of the gyro-water-bag model. This model is suitable for studying linear and nonlinear low-frequency micro-instabilities and the associated anomalous transport in magnetically-confined plasmas. The present paper addresses the derivation of the nonlinear gyro-water-bag model, its quasilinear approximation and their numerical approximations by Runge-Kutta semi-Lagrangian methods and Runge-Kutta discontinuous Galerkin schemes respectively.

  16. Kiondo Bag Boutique: A Serial Case for Introductory Financial Accounting

    ERIC Educational Resources Information Center

    Siriwardane, Harshini P.

    2014-01-01

    Kiondo Bag Boutique is a hypothetical serial case involving a start-up retail business. The case evolves from an ambitious business idea to a successful business. Through the evolving business, the importance of accounting information is highlighted. Different iterations are used to illustrate the role of accounting in serving and managing…

  17. Radiant heat source, vacuum bag, provide portable bonding oven

    NASA Technical Reports Server (NTRS)

    Nicholls, A. H.

    1967-01-01

    Portable bonding oven is formed to any desired size or configuration to attach doublers and brackets to the surfaces of large structures. A radiant heat source is used in combination with a heat resistant transport vacuum bag and a black heat absorbing cloth.

  18. Spontaneous low-pressure headache complicating bag-piping.

    PubMed

    Patrick, Alasdair; McAuley, David; Roxburgh, Richard

    2007-04-01

    We describe an interesting case of a 40-year-old lady who developed a spontaneous low-pressure headache whilst playing the bag-pipes. Playing wind instruments requires the generation of significant intra-thoracic pressure, which may have contributed to this musician's condition. PMID:17445112

  19. It's All in the Bag: A Genetics Activity

    ERIC Educational Resources Information Center

    Snyder, Jennifer

    2008-01-01

    This article presents an activity that uses sandwich bags to represent an individual's genome (their genetic make-up), and two variations of various objects representing the alleles of various genes. This activity includes the major components of an introductory genetics unit: from gamete production through probabilities of expected offspring…

  20. Long fluid filled bags suspended by line forces

    NASA Technical Reports Server (NTRS)

    Mullins, M. L.; Duncan, J. L.

    1975-01-01

    A previous analysis of fluid filled storage bags is extended to the case of a long fluid filled cylindrical membrane supported by uniform line loads. Cross-sectional shape, stiffness of the support system and stress resultants in the membrane are determined. The application of the numerical results to problems arising in the design of nonrigid airships is discussed.

  1. 42 CFR 84.88 - Breathing bag test.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... gasoline vapor at room temperature (24-30 °C./75-85 °F.) for a continuous period of twice the rated time of the apparatus (except for apparatus for escape only where the test period shall be the rated time of the apparatus). (b) The bag will be operated during this test by a breathing machine with...

  2. 14 CFR 223.24 - Transportation of empty mail bags.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Transportation of empty mail bags. 223.24 Section 223.24 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS FREE AND REDUCED-RATE TRANSPORTATION International Travel §...

  3. 14 CFR 223.24 - Transportation of empty mail bags.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Transportation of empty mail bags. 223.24 Section 223.24 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS FREE AND REDUCED-RATE TRANSPORTATION International Travel §...

  4. 14 CFR 223.24 - Transportation of empty mail bags.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Transportation of empty mail bags. 223.24 Section 223.24 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS FREE AND REDUCED-RATE TRANSPORTATION International Travel §...

  5. 14 CFR 223.24 - Transportation of empty mail bags.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Transportation of empty mail bags. 223.24 Section 223.24 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS FREE AND REDUCED-RATE TRANSPORTATION International Travel §...

  6. Micro-mesh fabric pollination bags for switchgrass

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Pollination bags for making controlled crosses between switchgrass plants were made from a polyester micro-mesh fabric with a mesh size of 41 µm which is smaller than the mean reported 43 µm diameter of switchgrass pollen. When used in paired plant crosses between switchgrass plants, the mean amoun...

  7. Developing Baby Bag Design by Using Kansei Engineering Method

    NASA Astrophysics Data System (ADS)

    Janari, D.; Rakhmawati, A.

    2016-01-01

    Consumer's preferences and market demand are essential factors for product's success. Thus, in achieving its success, a product should have design that could fulfill consumer's expectation. Purpose of this research is accomplishing baby bag product as stipulated by Kansei. The results that represent Kanseiwords are; neat, unique, comfortable, safe, modern, gentle, elegant, antique, attractive, simple, spacious, creative, colorful, durable, stylish, smooth and strong. Identification value on significance of correlation for durable attribute is 0,000 < 0,005, which means significant to baby's bag. While the value of coefficient regression is 0,812 < 0,005, which means that durable attribute insignificant to baby's bag.The result of the baby's bag final design selectionbased on the questionnaire 3 is resulting the combination of all design. Space for clothes, diaper's space, shoulder grip, side grip, bottle's heater pocket and bottle's pocket are derived from design 1. Top grip, space for clothes, shoulder grip, and side grip are derived from design 2.Others design that were taken are, spaces for clothes from design 3, diaper's space and clothes’ space from design 4.

  8. 19 CFR 148.83 - Diplomatic and consular bags.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Diplomatic and consular bags. 148.83 Section 148.83 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF... International Organizations and Special Treatment for Returning Individuals § 148.83 Diplomatic and...

  9. 49 CFR 178.521 - Standards for paper bags.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... must be made waterproof by the use of either a water-resistant ply as one of the two outermost plies or... 5M2 bag of three plies must be made waterproof by the use of a water-resistant ply as the outermost... waterproof ply or barrier, such as double-tarred kraft paper, plastics-coated kraft paper, plastics...

  10. 49 CFR 178.521 - Standards for paper bags.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... must be made waterproof by the use of either a water-resistant ply as one of the two outermost plies or... 5M2 bag of three plies must be made waterproof by the use of a water-resistant ply as the outermost... waterproof ply or barrier, such as double-tarred kraft paper, plastics-coated kraft paper, plastics...

  11. 49 CFR 178.521 - Standards for paper bags.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... must be made waterproof by the use of either a water-resistant ply as one of the two outermost plies or... 5M2 bag of three plies must be made waterproof by the use of a water-resistant ply as the outermost... waterproof ply or barrier, such as double-tarred kraft paper, plastics-coated kraft paper, plastics...

  12. 49 CFR 178.521 - Standards for paper bags.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... must be made waterproof by the use of either a water-resistant ply as one of the two outermost plies or... 5M2 bag of three plies must be made waterproof by the use of a water-resistant ply as the outermost... waterproof ply or barrier, such as double-tarred kraft paper, plastics-coated kraft paper, plastics...

  13. 49 CFR 178.521 - Standards for paper bags.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... more must be made waterproof by the use of either a water-resistant ply as one of the two outermost... plies. A 5M2 bag of three plies must be made waterproof by the use of a water-resistant ply as the... waterproof ply or barrier, such as double-tarred kraft paper, plastics-coated kraft paper, plastics...

  14. OBE approximation of NN scattering in bag-model QCD

    NASA Astrophysics Data System (ADS)

    Bakker, B. L. G.; Maslow, J. N.; Weber, H. J.

    1981-09-01

    A partial-wave helicity-state analysis of nucleon-nucleon scattering is carried out in momentum space. Its basis is a one-boson and two-pion exchange amplitude from bag-model quantum chromodynamics. The resulting phase shifts and bound-state parameters of the deuteron are compared with data up to laboratory energies of ≈350 MeV.

  15. 50 CFR 622.382 - Bag and possession limits.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE FISHERIES OF THE CARIBBEAN, GULF OF MEXICO, AND SOUTH ATLANTIC Coastal Migratory Pelagic Resources (Gulf of Mexico and South Atlantic) § 622.382 Bag and... specified by Florida for its waters (Rule 68B-12.004(1), Florida Administrative Code, in effect as of...

  16. 50 CFR 622.38 - Bag and possession limits.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE FISHERIES OF THE CARIBBEAN, GULF OF MEXICO, AND SOUTH ATLANTIC Reef Fish Resources of the Gulf of Mexico § 622.38 Bag and possession limits. (a) Additional applicability provisions... quantities of Gulf reef fish, i.e., Gulf reef fish in excess of applicable......

  17. 50 CFR 622.38 - Bag and possession limits.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE FISHERIES OF THE CARIBBEAN, GULF OF MEXICO, AND SOUTH ATLANTIC Reef Fish Resources of the Gulf of Mexico § 622.38 Bag and possession limits. (a) Additional applicability provisions... quantities of Gulf reef fish, i.e., Gulf reef fish in excess of applicable......

  18. 50 CFR 622.382 - Bag and possession limits.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE FISHERIES OF THE CARIBBEAN, GULF OF MEXICO, AND SOUTH ATLANTIC Coastal Migratory Pelagic Resources (Gulf of Mexico and South Atlantic) § 622.382 Bag and... specified by Florida for its waters (Rule 68B-12.004(1), Florida Administrative Code, in effect as of...

  19. Military applications of a cockpit integrated electronic flight bag

    NASA Astrophysics Data System (ADS)

    Herman, Robert P.; Seinfeld, Robert D.

    2004-09-01

    Converting the pilot's flight bag information from paper to electronic media is being performed routinely by commercial airlines for use with an on-board PC. This concept is now being further advanced with a new class of electronic flight bags (EFB) recently put into commercial operation which interface directly with major on-board avionics systems and has its own dedicated panel mounted display. This display combines flight bag information with real time aircraft performance and maintenance data. This concept of an integrated EFB which is now being used by the commercial airlines as a level 1 certified system, needs to be explored for military applications. This paper describes a system which contains all the attributes of an Electronic Flight Bag with the addition of interfaces which are linked to military aircraft missions such as those for tankers, cargo haulers, search and rescue and maritime aircraft as well as GATM requirements. The adaptation of the integrated EFB to meet these military requirements is then discussed.

  20. 21 CFR 870.3650 - Pacemaker polymeric mesh bag.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Pacemaker polymeric mesh bag. 870.3650 Section 870.3650 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CARDIOVASCULAR DEVICES Cardiovascular Prosthetic Devices § 870.3650 Pacemaker...

  1. 21 CFR 870.3650 - Pacemaker polymeric mesh bag.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Pacemaker polymeric mesh bag. 870.3650 Section 870.3650 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CARDIOVASCULAR DEVICES Cardiovascular Prosthetic Devices § 870.3650 Pacemaker...

  2. 21 CFR 870.3650 - Pacemaker polymeric mesh bag.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Pacemaker polymeric mesh bag. 870.3650 Section 870.3650 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CARDIOVASCULAR DEVICES Cardiovascular Prosthetic Devices § 870.3650 Pacemaker...

  3. 21 CFR 870.3650 - Pacemaker polymeric mesh bag.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Pacemaker polymeric mesh bag. 870.3650 Section 870.3650 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CARDIOVASCULAR DEVICES Cardiovascular Prosthetic Devices § 870.3650 Pacemaker...

  4. High acceleration cable deployment system

    NASA Technical Reports Server (NTRS)

    Canning, T. N.; Barns, C. E.; Murphy, J. P.; Gin, B.; King, R. W. (Inventor)

    1981-01-01

    A deployment system that will safely pay one cable from a ballistic forebody when the forebody is separated from an afterbody (to which the cable is secured and when the separation is marked by high acceleration and velocity) is described.

  5. SMAP Launch and Deployment Sequence

    NASA Video Gallery

    This video combines file footage of a Delta II rocket and computer animation to depict the launch and deployment of NASA's Soil Moisture Active Passive satellite. SMAP is scheduled to launch on Nov...

  6. BAG3 affects the nucleocytoplasmic shuttling of HSF1 upon heat stress

    SciTech Connect

    Jin, Young-Hee; Ahn, Sang-Gun; Kim, Soo-A.

    2015-08-21

    Bcl2-associated athoanogene (BAG) 3 is a member of the co-chaperone BAG family. It is induced by stressful stimuli such as heat shock and heavy metals, and it regulates cellular adaptive responses against stressful conditions. In this study, we identified a novel role for BAG3 in regulating the nuclear shuttling of HSF1 during heat stress. The expression level of BAG3 was induced by heat stress in HeLa cells. Interestingly, BAG3 rapidly translocalized to the nucleus upon heat stress. Immunoprecipitation assay showed that BAG3 interacts with HSF1 under normal and stressed conditions and co-translocalizes to the nucleus upon heat stress. We also demonstrated that BAG3 interacts with HSF1 via its BAG domain. Over-expression of BAG3 down-regulates the level of nuclear HSF1 by exporting it to the cytoplasm during the recovery period. Depletion of BAG3 using siRNA results in reduced nuclear HSF1 and decreased Hsp70 promoter activity. BAG3 in MEF(hsf1{sup −/−}) cells actively translocalizes to the nucleus upon heat stress suggesting that BAG3 plays a key role in the processing of the nucleocytoplasmic shuttling of HSF1 upon heat stress. - Highlights: • The expression level of BAG3 is induced by heat stress. • BAG3 translocates to the nucleus upon heat stress. • BAG3 interacts with HSF1 and co-localizes to the nucleus. • BAG3 is a key regulator for HSF1 nuclear shuttling.

  7. STS-32 OV-102 air revitalization system (ARS) humidity separator problem

    NASA Technical Reports Server (NTRS)

    1990-01-01

    During STS-32, onboard Columbia, Orbiter Vehicle (OV) 102, a leakage problem at environmental control and life support system (ECLSS) air revitalization system (ARS) humidity separator A below the middeck is solved with a plastic bag and a towel. The towel inserted inside a plastic bag absorbed the water that had collected at the separator inlet.

  8. Evaluation of COSHH Essentials for vapor degreasing and bag filling operations.

    PubMed

    Jones, Rachael M; Nicas, Mark

    2006-03-01

    COSHH Essentials is a system of workplace risk management developed by the UK Health and Safety Executive for use by proprietors of small and medium sized enterprises. COSHH Essentials recommends exposure control approaches based on a chemical's potential health hazards, scale of use and ability to become airborne. More specifically, chemicals are grouped into hazard bands based on their potential health hazards, and each hazard band is associated with a 10-fold range of 8 h time weighted average airborne concentrations, termed exposure bands. The recommended control approaches are intended to limit air concentrations to within or below the exposure bands. Using air monitoring data from NIOSH Health Hazard Evaluations and Control Technology Assessments, we evaluated the ability of COSHH Essentials to select adequate control technology for vapor degreasing and bag filling operations, and the ability of the recommended control approaches to successfully limit air concentrations. We identified two types of misclassification errors. 'Under-controlled' errors were instances in which the airborne concentration exceeded the upper limit of the chemical's exposure band in the presence of control technology; such errors were observed in 78% (139/179) and 48% (76/159) of measurements collected at vapor degreasing and bag filling operations, respectively. 'Over-controlled' errors were instances in which the airborne concentration was within or below the chemical's exposure band in the absence of control technology, although conditions of use prompt COSHH Essentials to recommend controls; such errors were observed in 61% (102/167) and 8% (3/26) of measurements collected at vapor degreasing and bag filling operations, respectively. In our use of COSHH Essentials, we found that for many particulate substances toxicological information was difficult to obtain. Given the high prevalence of the control errors, we judge it is important that COSHH Essentials provide the exposure bands

  9. [Recycle of jute bags; asbestos in agriculture, exposure and pathology ].

    PubMed

    Barbieri, P G; Somigliana, A; Lombardi, S; Girelli, R; Rocco, A; Pezzotti, C; Silvestri, S

    2008-01-01

    During the last four years, a deeper examination of malignant mesothelioma (MM) cases occurred within non asbestos textile industry highlighted asbestos past exposure in several textile industrial divisions. In spite of that, poor information about recycled textile bags previously containing asbestos fibres is available to the National Mesothelioma Registry, although holding a remarkable data bank on more than 3500 work histories and sources of asbestos exposures. Besides the analysis of the exposure circumstances and the registered health effects of the past exposure within the recycling activity, the aim of this research was to relate the possible involvement of the agricultural sector, where the use of recycled jute bags was very diffused. The MM cases were collected from the Mesothelioma Registry of Brescia, asbestosis, pleural plaques and lung cancer cases were collected from the Occupational Diseases Archive of the Local Public Occupational Health Service of the Province of Brescia. During the 1977-2006 period, 8 cases of MM, 4 cases of pulmonary asbestosis, 4 of isolated bilateral pleural plaques and I of lung cancer in pulmonary asbestosis, were observed among workers employed in bags recycling activity in 4 small companies, one of them still operating, employing about 50 workers. Even more, among the 65 MM cases classified by the Registry with "unknown asbestos exposure" (UAE), the most relevant frequency of working histories concerned the agriculture sector. Confirming a past signalling, the investigations underlined the cross linkage between this working activity and the diffusion of recycled bags in the agriculture sector. In the Province of Brescia, the activities of these small jute bags recycling plants were linked, even geographically, to the asbestos cement manufacture plant using a huge number of bags, roughly until mid seventies. Therefore, a large number of these recycled bags, previously containing asbestos, were generally used for harvesting

  10. Deployable antenna phase A study

    NASA Technical Reports Server (NTRS)

    Schultz, J.; Bernstein, J.; Fischer, G.; Jacobson, G.; Kadar, I.; Marshall, R.; Pflugel, G.; Valentine, J.

    1979-01-01

    Applications for large deployable antennas were re-examined, flight demonstration objectives were defined, the flight article (antenna) was preliminarily designed, and the flight program and ground development program, including the support equipment, were defined for a proposed space transportation system flight experiment to demonstrate a large (50 to 200 meter) deployable antenna system. Tasks described include: (1) performance requirements analysis; (2) system design and definition; (3) orbital operations analysis; and (4) programmatic analysis.

  11. The parenting cycle of deployment.

    PubMed

    DeVoe, Ellen R; Ross, Abigail

    2012-02-01

    Parents of dependent children comprise approximately 42% of Active Duty and National Guard/Reserve military members serving in Operation Iraqi Freedom/Operation Enduring Freedom. Recent estimates indicate that more than two million children have experienced parental deployment since the terrorist attacks on September 11, 2001. This article seeks to characterize the impact of the deployment life cycle on parenting roles among service members and at-home partners/caregivers of dependent children. Specifically, a new conceptual framework is presented for considering the ways in which parenting and co-parenting processes are affected by the demands and transitions inherent in contemporary deployment to a war zone. Although the phase-based emotional cycle of deployment continues to offer an instructive description of the broad challenges faced by military couples, a parenting cycle of deployment model shifts the perspective to the critical and largely ignored processes of parenting in the context of deployment and war, and to the realities faced by parents serving in the U.S. military. Implications for prevention, intervention, and future research related to military families are addressed. PMID:22360065

  12. A biocompatibility study on peritoneal dialysis solution bags for CAPD.

    PubMed

    Carozzi, S; Nasini, M G; Schelotto, C; Caviglia, P M; Santoni, O; Pietrucci, A

    1993-01-01

    Numerous factors related to the composition of peritoneal dialysis solutions (PDS) contribute to the pathogenesis of peritoneal fibrosis during continuous ambulatory peritoneal dialysis (CAPD). They include high osmolarity, low pH, and the presence of lactate, which may be responsible for stimulating the proliferation of peritoneal fibroblasts (PF) and for the toxicity on the peritoneal mesothelial cells (PMC). Similar effects could be hypothesized for the plasticizers released from the PDS bags, usually made of polyvinyl chloride (PVC), such as the acid esters of phthalic acid, particularly bis-(2-ethylhexyl) phthalate (BEHP). Recently, however, new BEHP-free bags (Clear-Flex, Bieffe, Italy) made of three layers (polyethylene, nylon, and polypropylene) have been introduced. The aim of this work is to evaluate in vitro the effects of samples of PDS contained in PVC bags (Bieffe) and in Clear-Flex bags on the proliferative capacity of peritoneal fibroblasts and peritoneal mesothelial cells, and the release of interferon gamma (IFN gamma), interleukin-1 (IL-1) and prostaglandin E2 (PGE2) from peritoneal T lymphocytes (PTLs) and macrophages (PM phi s). Results have shown that in the presence of PDS samples contained in PVC bags, the proliferative capacity of peritoneal fibroblasts was higher than in Clear-Flexbags. There was also an increased release of IFN-gamma and IL-1 from PTLs and PM phi s (cytokines that stimulate the collagen synthesis) and a decreased release of PGE2 (cytokines which inhibit the collagen synthesis). An inhibiting action on peritoneal mesothelial cells was also seen.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:8105908

  13. Laparoscopic splenectomy for splenomegaly using a homemade retrieval BAG

    PubMed Central

    Su, Chia-Hung; Yin, Tzu-Chieh; Huang, Che-Jen; Fan, Wen-Chieh

    2013-01-01

    Introduction Operating on an enlarged spleen via the laparoscopic approach presents several challenges. A homemade bag may facilitate retrieval of the enlarged spleen assisted by a laparoscope and save medical expense. Aim To assess the feasibility and safety of laparoscopic splenectomy for moderate or massive splenomegaly using our technique and a homemade retrieval bag. Material and methods Fifty patients underwent laparoscopic splenectomy for moderate or massive splenomegaly which was defined as the major axis exceeding 17 cm by abdominal computed tomography. A homemade retrieval bag made from a commercial sterile infusion container which costs about US$ 1–2 per piece was used for spleen retrieval. Two transabdominal sutures for suspension of the retrieval bag were made to aid specimen removal in this technique. Results There were 31 males and 19 females with mean age of 56 ±11 years. Laparoscopic splenectomy was successfully completed in 49 of these 50 patients. Overall, mean operative time was 149 ±31 min (range: 100–252 min). Median estimated blood loss was 189 ±155 ml (range: 50–920 ml). There were 12 minor complications but no mortality. Time to discharge after surgery ranged from 3 to 9 (mean: 4.7 ±1.7 days). The average splenic weight was 729 ±74 g (range: 632–930 g). Conclusions Our preliminary results indicate that laparoscopic splenectomy is feasible and safe for moderate or massive splenomegaly and may be a well-tolerated alternative to open splenectomy. Not only is the cost of our homemade retrieval bag low, but also it is easy to make and ready to use. PMID:24501603

  14. Method of reusably sealing a silicone rubber vacuum bag to a mold for composite manufacture

    NASA Technical Reports Server (NTRS)

    Steinbach, John (Inventor)

    1989-01-01

    A silicone rubber vacuum bag for use in composite article manufacture is reusably sealed to a mold, without mechanical clamping means. The mold-mating portion of the bag is primed with a silicone rubber adhesive, which is cured thereto, and a layer of semiadhesive sealer is applied between the primed mold-mating portion of the bag and the mold.

  15. A biomarker study using mussels deployed in San Diego Bay

    SciTech Connect

    Steinert, S.; Montee, R.S.; Chadwick, B.; Leather, J.; Sanders, B. Salazar, M.; Salazar, S.; Anderson, J.

    1995-12-31

    In the summer of 1995 a comprehensive assessment of the extent and consequences of marine environmental contamination in the area of Naval Station San diego was conducted. The study addressed contamination sources, distributions, concentrations, transport, sediment-water exchange, biological effects, and degradation. The biological effects portion of the study included contaminant bioaccumulation, growth, and biomarker measurements, in mussels deployed at six stations around the Naval Station. The mussels were deployed for {approximately} 30 days in plastic mesh bags, placed 1 meter above the bottom. To reduce variability the mussels for the study were initially sorted within an extremely narrow size range, 37.8 {+-} 0.6 mm. DNA damage as measured using the comet assay, and tissue levels of stress proteins hsp 60 and hsp 70, were the biomarkers measured. In addition, mussel tissue extracts were applied to the P450 (CYP1A1) reporter gene system. Stress related biological effects increased in relation to sediment contaminants at all but one station. Evidence from this study and an earlier 1993 study suggests that the non-sediment associated effects observed at one station may be the result of PAH photoactivation of accumulated PAHs.

  16. Centrifugal regulator for control of deployment rates of deployable elements

    NASA Technical Reports Server (NTRS)

    Vermalle, J. C.

    1980-01-01

    The requirements, design, and performance of a centrifugal regulator aimed at limiting deployment rates of deployable elements are discussed. The overall mechanism is comprised of four distinct functional parts in a machined housing: (1) the centrifugal brake device, which checks the payout of a deployment cable; (2) the reducing gear, which produces the spin rate necesary for the braking device; (3) the payout device, which allows the unwinding of the cable; and (4) the locking device, which prevents untimely unwinding. The centrifugal regulator is set into operation by a threshold tension of the cable which unlocks the mechanism and allows unwinding. The pulley of the windout device drives the centrifugal brake with the help of the reducing gear. The centrifugal force pushes aside weights that produce friction of the studs in a cylindrical housing. The mechanism behaved well at qualification temperature and vibrations.

  17. Can "contamination" occur in body bags?-The example of background fibres in body bags used in Australia.

    PubMed

    Schwendener, Giuliana; Moret, Sébastien; Cavanagh-Steer, Karen; Roux, Claude

    2016-09-01

    Impurities that are transferred to a crime scene or a body can have a significant negative impact on the investigation if the existence of the contamination is not known, and the source of the contamination is not identified. Forensic consumables, such as DNA swabs, have been known to have caused contaminations, wrongfully linking crimes throughout Europe. In that context, this study focused on body bags, widely used to transfer a corpse from the crime scene to the morgue. Our preliminary survey showed that several countries and Australian Jurisdictions are conducting the sampling of trace evidence at the morgue after the transportation of the body. Potential impurities present in body bags could thus interfere with pertinent traces. The aim of this work was to qualify and quantify the background contamination of trace evidence in body bags used within Australia. Fifteen body bags from four Australian Jurisdictions or laboratories were searched for micro traces. Impurities such as fibres and unidentified particles were detected in each examined body bag, with an estimated average of 3603 coloured fibres and 1429 unidentified particles. This number of fibres is similar to the amount found on a vinyl cinema seat in other studies. Various other contaminants such as pieces of fabric, hairs, parts of insects or feathers were also observed. It is hypothesised that these impurities are introduced during the manufacturing process. This high number of impurities can lead to incorrect conclusions and misleading investigative leads. This paper presents an overview of the problems these impurities can cause and proposes several strategies to prevent future issues. PMID:27484248

  18. Adaptable Deployable Entry and Placement Technology (ADEPT)

    NASA Video Gallery

    The Adaptable, Deployable Entry Placement Technology (ADEPT) Project will test and demonstrate a deployable aeroshell concept as a viable thermal protection system for entry, descent, and landing o...

  19. Newberry Seismic Deployment Fieldwork Report

    SciTech Connect

    Wang, J; Templeton, D C

    2012-03-21

    This report summarizes the seismic deployment of Lawrence Livermore National Laboratory (LLNL) Geotech GS-13 short-period seismometers at the Newberry Enhanced Geothermal System (EGS) Demonstration site located in Central Oregon. This Department of Energy (DOE) demonstration project is managed by AltaRock Energy Inc. AltaRock Energy had previously deployed Geospace GS-11D geophones at the Newberry EGS Demonstration site, however the quality of the seismic data was somewhat low. The purpose of the LLNL deployment was to install more sensitive sensors which would record higher quality seismic data for use in future seismic studies, such as ambient noise correlation, matched field processing earthquake detection studies, and general EGS microearthquake studies. For the LLNL deployment, seven three-component seismic stations were installed around the proposed AltaRock Energy stimulation well. The LLNL seismic sensors were connected to AltaRock Energy Gueralp CMG-DM24 digitizers, which are powered by AltaRock Energy solar panels and batteries. The deployment took four days in two phases. In phase I, the sites were identified, a cavity approximately 3 feet deep was dug and a flat concrete pad oriented to true North was made for each site. In phase II, we installed three single component GS-13 seismometers at each site, quality controlled the data to ensure that each station was recording data properly, and filled in each cavity with native soil.

  20. Ammonia Diffusion through Nalophan Double Bags: Effect of Concentration Gradient Reduction

    PubMed Central

    Capelli, Laura; Boiardi, Emanuela; Del Rosso, Renato

    2014-01-01

    The ammonia loss through Nalophan bags has been studied. The losses observed for storage conditions and times as allowed by the reference standard for dynamic olfactometry (EN 13725:2003) indicate that odour concentration values due to the presence of small molecules may be significantly underestimated if samples are not analysed immediately after sampling. A diffusion model was used in order to study diffusion through the bag. The study discusses the effect of concentration gradient (ΔC) across the polymeric membrane of the analyte. The ΔC was controlled by using a setup bag called “double bags.” Experimental data show a reduction of ammonia percentage losses due to the effect of the external multibarrier. The expedient of the double bag loaded with the same gas mixture allows a reduced diffusion of ammonia into the inner bag. Comparing the inner bag losses with those of the single bag stored in the same conditions (T, P, u) and with equal geometrical characteristics (S/V, z), it was observed that the inner bag of the double bag displays a 16% loss while the single bag displays a 37% loss. Acting on the ΔC it is possible to achieve a gross reduction of 57% in the ammonia leakage due to diffusion. PMID:25506608

  1. Comparison of cryopreservation bags for hematopoietic progenitor cells using a WBC-enriched product.

    PubMed

    Dijkstra-Tiekstra, Margriet J; Hazelaar, Sandra; Gkoumassi, Effimia; Weggemans, Margienus; de Wildt-Eggen, Janny

    2015-04-01

    Hematopoietic progenitor cells (HPC) are stored in cryopreservation bags that are resistant to liquid nitrogen. Since Cryocyte bags of Baxter (B-bags) are no longer available, an alternative bag was sought. Also, the influence of freezing volume was studied. Miltenyi Biotec (MB)- and MacoPharma (MP)-bags passed the integrity tests without failure. Comparing MB- and MP-bags with B-bags, no difference in WBC recovery or viability was found when using a WBC-enriched product as a "dummy" HPC product. Further, a freezing volume of 30 mL resulted in better WBC recovery and viability than 60 mL. Additonal studies using real HPC might be necessary. PMID:25582270

  2. Design of Control System for Flexible Packaging Bags Palletizing Production Line Based on PLC

    NASA Astrophysics Data System (ADS)

    Zheng, Huiping; Chen, Lin; Zhao, Xiaoming; Liu, Zhanyang

    Flexible packaging bags palletizing production line is to put the bags in the required area according to particular order and size, in order to finish handling, storage, loading and unloading, transportation and other logistics work of goods. Flexible packaging bags palletizing line is composed of turning bags mechanism, shaping mechanism, indexing mechanism, marshalling mechanism, pushing bags mechanism, pressing bags mechanism, laminating mechanism, elevator, tray warehouse, tray conveyor and loaded tray conveyor. Whether the whole production line can smoothly run depends on each of the above equipment and precision control among them. In this paper the technological process and the control logic of flexible packaging bags palletizing production line is introduced. Palletizing process of the production line realized automation by means of a control system based on programmable logic controller (PLC). It has the advantages of simple structure, reliable and easy maintenance etc.

  3. Sample acquisition and instrument deployment

    NASA Technical Reports Server (NTRS)

    Boyd, Robert C.

    1995-01-01

    Progress is reported in developing the Sample Acquisition and Instrument Deployment (SAID) system, a robotic system for deploying science instruments and acquiring samples for analysis. The system is a conventional four degree of freedom manipulator 2 meters in length. A baseline design has been achieved through analysis and trade studies. The design considers environmental operating conditions on the surface of Mars, as well as volume constraints on proposed Mars landers. Control issues have also been studied, and simulations of joint and tip movements have been performed. The systems have been fabricated and tested in environmental chambers, as well as soil testing and robotic control testing.

  4. Transport characteristics across drum filter vents and polymer bags

    SciTech Connect

    Liekhus, K.J.

    1994-08-01

    The rate at which hydrogen (H {sub 2}) or a volatile organic compound (VOC) exits a layer of confinement in a vented waste drum is proportional to the concentration difference across the layer. The proportionality constant is the gas transport characteristic. A series of transport experiments were conducted to determine H{sub 2} and VOC transport characteristics across different drum filter vents and polymer bags. This report reviews the methods and results of past investigators in defining transport characteristics across filter vents and polymer bags, describes the apparatus and procedures used in these experiments, compares the reported and estimated transport characteristics with earlier results, and discusses the impact of changing the transport characteristic values used in model calculations.

  5. Improving ensemble decision tree performance using Adaboost and Bagging

    NASA Astrophysics Data System (ADS)

    Hasan, Md. Rajib; Siraj, Fadzilah; Sainin, Mohd Shamrie

    2015-12-01

    Ensemble classifier systems are considered as one of the most promising in medical data classification and the performance of deceision tree classifier can be increased by the ensemble method as it is proven to be better than single classifiers. However, in a ensemble settings the performance depends on the selection of suitable base classifier. This research employed two prominent esemble s namely Adaboost and Bagging with base classifiers such as Random Forest, Random Tree, j48, j48grafts and Logistic Model Regression (LMT) that have been selected independently. The empirical study shows that the performance varries when different base classifiers are selected and even some places overfitting issue also been noted. The evidence shows that ensemble decision tree classfiers using Adaboost and Bagging improves the performance of selected medical data sets.

  6. Racial determination of origin of mourning doves in hunters' bags

    USGS Publications Warehouse

    Aldrich, J.W.; Duvall, A.J.; Geis, A.D.

    1958-01-01

    A method is described for determining the general area of production of mourning doves that are shot during the hunting season. This procedure is based on the identification of racial characteristics that can be ascertained from samples of wings. The application and utility of this method were demonstrated with data gathered from doves shot in two important dove-hunting areas, Georgia and Texas. The Georgia data indicated that the early-season kill consisted largely of the race carolinensis, while later in the season marginella and the intermediate form made up most of the bag. The wing samples from Texas indicated that birds produced outside of southern Texas made up the largest part of the bag in southern Texas during the entire season. Doves produced west of the Appalachians contributed to both the Georgia and Texas kill.

  7. Purple urine bag syndrome in an elderly patient from Colombia.

    PubMed

    Mondragón-Cardona, Alvaro; Jiménez-Canizales, Carlos Eduardo; Alzate-Carvajal, Verónica; Bastidas-Rivera, Fabricio; Sepúlveda-Arias, Juan Carlos

    2015-07-01

    A 71-year-old woman in a nursing home, with indwelling urinary catheter, bedridden, presented with a purple urine collector bag. The purple urine bag syndrome is a rare condition associated with the metabolism of tryptophan by overgrowth of intestinal bacteria. The purple color is formed by a combination of indigo and indirubin produced as a result of phosphatase and sulfatase enzymatic activity of bacteria on indoxyl sulfate, under alkaline pH of the urine. We present the second case of this syndrome reported in Colombia detailing the management of this rare syndrome associated with urinary tract infection. Several conditions should be considered in the differential diagnose of diseases that cause discoloration of the urine. PMID:26230133

  8. Modeling of drop breakup in the bag breakup regime

    NASA Astrophysics Data System (ADS)

    Wang, C.; Chang, S.; Wu, H.; Xu, J.

    2014-04-01

    Several analytic models for predicting the drop deformation and breakup have been developed over the last three decades, but modeling drop breakup in the bag-type regime is less reported. In this Letter, a breakup model has been proposed to predict the drop deformation length and breakup time in the bag-type breakup regime in a more accurate manner. In the present model, the drop deformation which is approximately as the displacement of the centre of mass (c. m.) along the axis located at the centre of the drop, and the movement of c. m. is obtained by solving the pressure balance equation. The effects of the drop deformation on the drop external aerodynamic force are considered in this model. Drop breakup occurs when the deformation length reaches the maximum value and the maximum deformation length is a function of Weber number. The performance and applicability of the proposed breakup model are tested against the published experimental data.

  9. Astrophysical bags - A new paradigm for active galactic nuclei?

    NASA Technical Reports Server (NTRS)

    Wilson, Thomas L.

    1992-01-01

    Active galaxies are believed to consist of a compact nucleus, the standard model for which is a massive black hole or a cluster of black holes. A different paradigm is considered here, deriving from quark confinement theory in QCD. It is an 'astrophysical bag', modelled after the 'hadron bags' of particle physics which have already been studied in astrophysics as quark stars. Another interpretation of the cosmological constant in general relativity, and possibly a new quasar redshift formula, are introduced. As a highly-energetic object, this model may resolve the baryonic matter problem for fuelling AGN accretion processes which black hole paradigms cannot account for. Here, baryons, cosmic rays, and neutrinos are free.

  10. Testing of SRS and RFETS Nylon Bag Material

    SciTech Connect

    Laurinat, J.E.

    1998-11-03

    This report compares the effects of radiation and heating on nylon bagout materials used at the Savannah River Site (SRS) and the Rocky Flats Environmental Technology Site (RFETS). Recently, to simplify the processing of sand, slag, and crucible (SS and C), FB-Line has replaced the low-density polyethylene (LDPE) and polyvinyl chloride (PVC) bags normally used to package cans of plutonium-bearing material with nylon bags. LDPE and PVC are not soluble in the nitric acid dissolver solution used in F-Canyon, so cans bagged using these materials had to be repackaged before they were added to the dissolver. Because nylon dissolves in nitric acid, cans bagged in nylon can be charged to the F-Canyon dissolvers without repackaging, thereby reducing handling requirements and personnel exposure. As part of a program to process RFETS SS and C at SRS, RFETS has also begun to use a nylon bagout material. The RFETS bag materials is made from a copolymer of nylon 6 and nylon 6.9, while the SRS material is made from a nylon 6 monomer. In addition, the SRS nylon has an anti-static agent added. The RFETS nylon is slightly softer than the SRS nylon, but does not appear to be as resistant to flex cracks initiated by contact with sharp corners of the inner can containing the SS and C.2 FB-Line Operations has asked for measurement of the effects of radiation and heating on these materials. Specifically, they have requested a comparison of the material properties of the plastics before and after irradiation, a measurement of the amount of outgassing when the plastics are heated, and a calculation of the amount of radiolytic gas generation. Testing was performed on samples taken from material that is currently used in FB-Line (color coded orange) and at RFETS. The requested tests are the same tests previously performed on the original and replacement nylon and LDPE bag materials.3,4,5. To evaluate the effect of irradiation on material properties, tensile stresses and elongations to break

  11. Effective ultraviolet irradiation of platelet concentrates in teflon bags

    SciTech Connect

    Capon, S.M.; Sacher, R.A.; Deeg, H.J. )

    1990-10-01

    Several plastic materials used in blood storage were evaluated for their ability to transmit ultraviolet B (UVB) light. A plastic bag manufactured from sheets of transparent Teflon efficiently (78-86%) transmitted UVB light and was employed in subsequent functional studies of lymphocytes and platelets exposed to UVB light while contained in these bags. In vitro experiments showed a UVB dose-dependent abrogation of lymphocyte responder and stimulator functions, with concurrent preservation of platelet aggregation responses. In a phase I pilot study, UVB-treated platelet concentrates were administered to four bone marrow transplant recipients. Adverse effects attributable to the transfusions were not observed, and patients showed clinically effective transfusion responses. No patient developed lymphocytotoxic HLA or platelet antibodies. These studies suggest that platelets can be effectively irradiated with UVB light in a closed system. However, numerous variables, including container material, volume and composition of contents, steady exposure versus agitation, and exact UV wavelength, must be considered.

  12. Improvements for rotary viscous dampers used in spacecraft deployment mechanisms

    NASA Technical Reports Server (NTRS)

    Stewart, Alphonso; Powers, Charles; Lyons, Ron

    1998-01-01

    During component level thermal-vacuum deployment testing of eight rotary viscous dampers for the Tropical Rainfall Measuring Mission (TRMM) satellite, all the dampers failed to provide damping during a region of the deployment. Radiographic examination showed that air in the damping fluid caused the undamped motion when the dampers were operated in a vacuum environment. Improvements in the procedure used to fill the dampers with damping fluid, the installation of a Viton vacuum seal in the damper cover, and improved screening techniques eliminated the problem.

  13. Electro membrane extraction using sorbent filled porous membrane bag.

    PubMed

    Naing, Nyi Nyi; Li, Sam Fong Yau; Lee, Hian Kee

    2015-12-01

    Electro membrane extraction-solid-liquid phase microextraction (EME-SLPME) was developed for the first time to determine phenolic contaminants in water. The extraction system consisted of a solid/liquid interface that permitted a three-phase microextraction approach involving an aqueous sample (donor phase): an organic solvent-sorbent within a membrane bag, and an organic solvent (extractant phase), operated in a direct immersion sampling system. The sorbent, reduced graphene oxide/polyvinyl alcohol, synthesized using graphene oxide and polyvinyl alcohol by dispersing the graphene oxide in polyvinyl alcohol and chemically reducing it in aqueous solution. The prepared sorbent was dispersed in 1-octanol and the solution was immobilized by sonication in the membrane bag wall pores which was in contact with the aqueous donor solution and organic extractant solvent (1-octanol) in the main bag itself. The analytes were transported by application of an electrical potential difference of 100V across the sorbent/solvent phase from the aqueous sample into the organic extractant phase in the membrane bag. After extraction and derivatization, gas chromatography-mass spectrometry was used to determine the derivatized analytes. This proposed EME-LSPME procedure provided high extraction efficiency with relative recoveries up to 99.6%. A linearity range of between 0.05 and 100μgL(-1) with corresponding coefficients of determination (r(2)) of between 0.987 and 0.996 were obtained. The limits of detection were in the range of between 0.003 and 0.053μgL(-1). This proposed method was successfully applied to the extraction of phenolic contaminants from water sample. PMID:26530143

  14. Simpla Plus leg bag: approval by the National Customer Group.

    PubMed

    Hudson, Linda; McNicoll, Diane

    The choice of the right product for the right patients is fundamental in the adequate care of incontinent patients: therefore, it is important that nurses and healthcare professionals are aware of all the products that are available and that these products meet the required standards. The Simpla Plus leg bag, manufactured by Coloplast, is an example of one such product which has been officially approved by the National Customer Group for inclusion in the NHS purchasing and supply contract. PMID:12743481

  15. NN interaction from bag-model quark interchange

    SciTech Connect

    Bakker, B.L.G.; Bozoian, M.; Maslow, J.N.; Weber, H.J.

    1982-03-01

    A partial-wave helicity-state analysis of elastic nucleon-nucleon scattering is carried out in momentum space. Its basis is a one- and two-boson exchange amplitude from a bag-model quark interchange mechanism. The resulting phase shifts and bound-state parameters of the deuteron are compared with other meson theoretic potentials and data up to laboratory energies of approx.350 MeV.

  16. Quark-meson coupling model with the cloudy bag

    SciTech Connect

    Nagai, S.; Miyatsu, T.; Saito, Kenji; Tsushima, Kazuo

    2008-07-01

    Using the volume coupling version of the cloudy bag model, the quark-meson coupling model is extended to study the role of pion field and the properties of nuclear matter. The extended model includes the effect of gluon exchange as well as the pion-cloud effect, and provides a good description of the nuclear matter properties. The relationship between the extended model and the EFT approach to nuclear matter is also discussed.

  17. Volatile organic compounds in polyethylene bags-A forensic perspective.

    PubMed

    Borusiewicz, Rafał; Kowalski, Rafał

    2016-09-01

    Polyethylene bags, though not recommended, are sometimes used in some countries as improvised packaging for items sent to be analysed for the presence of volatile organic compounds, namely ignitable liquids residues. Sometimes items made of polyethylene constitute the samples themselves. It is well known what kind of volatile organic compounds are produced as a result of polyethylene thermal decomposition, but there is a lack of information relating to if some volatile compounds are present in unheated/unburned items made of polyethylene in detectable amounts and, if so, what those compounds are. The aim of this presented research was to answer these questions. 28 different bags made of polyethylene, representing 9 brands, were purchased in local shops and analysed according to the procedure routinely used for fire debris. The results proved that in almost all bags a distinctive mixture of compounds is present, comprising of n-alkanes and n-alkenes with an even number of carbon atoms in their molecules. Some other compounds (e.g., limonene, 2,2,4,6,6-pentamethylheptane) are also often present, but the presence of even n-alkanes and n-alkenes constitutes the most characteristic feature. PMID:27458996

  18. Evaluation of Double-Vacuum-Bag Process For Composite Fabrication

    NASA Technical Reports Server (NTRS)

    Hou, T. H.; Jensen, B. J.

    2004-01-01

    A non-autoclave vacuum bag process using atmospheric pressure alone that eliminates the need for external pressure normally supplied by an autoclave or a press is an attractive method for composite fabrication. This type of process does not require large capital expenditures for tooling and processing equipment. In the molding cycle (temperature/pressure profile) for a given composite system, the vacuum application point has to be carefully selected to achieve the final consolidated laminate net shape and resin content without excessive resin squeeze-out. The traditional single-vacuum- bag (SVB) process is best suited for molding epoxy matrix based composites because of their superior flow and the absence of reaction by-products or other volatiles. Other classes of materials, such as polyimides and phenolics, generate water during cure. In addition, these materials are commonly synthesized as oligomers using solvents to facilitate processability. Volatiles (solvents and reaction byproducts) management therefore becomes a critical issue. SVB molding, without additional pressure, normally fails to yield void-free quality composites for these classes of resin systems. A double-vacuum- bag (DVB) process for volatile management was envisioned, designed and built at the NASA Langley Research Center. This experimental DVB process affords superior volatiles management compared to the traditional SVB process. Void-free composites are consistently fabricated as measured by C-scan and optical photomicroscopy for high performance polyimide and phenolic resins.

  19. Building Diagnostic Market Deployment - Final Report

    SciTech Connect

    Katipamula, Srinivas; Gayeski, N.

    2012-04-01

    The work described in this report was done as part of a Cooperative Research and Development Agreement (CRADA) between the U.S. Department of Energy’s Pacific Northwest National Laboratory (PNNL) and KGS Building LLC (KGS). PNNL and KGS both believe that the widespread adoption of automated fault de4tection and diagnostic (AFDD) tools will result in significant reduction to energy and peak energy consumption. The report provides an introduction, and summary of the various tasks performed under the CRADA. The CRADA project had three major focus areas: 1) Technical Assistance for Whole Building Energy Diagnostician (WBE) Commercialization, 2) Market Transfer of the Outdoor Air/Economizer Diagnostician (OAE), and 3) Development and Deployment of Automated Diagnostics to Improve Large Commercial Building Operations.

  20. Lightweight, Self-Deployable Wheels

    NASA Technical Reports Server (NTRS)

    Chmielewski, Artur; Sokolowski, Witold; Rand, Peter

    2003-01-01

    Ultra-lightweight, self-deployable wheels made of polymer foams have been demonstrated. These wheels are an addition to the roster of cold hibernated elastic memory (CHEM) structural applications. Intended originally for use on nanorovers (very small planetary-exploration robotic vehicles), CHEM wheels could also be used for many commercial applications, such as in toys. The CHEM concept was reported in "Cold Hibernated Elastic Memory (CHEM) Expandable Structures" (NPO-20394), NASA Tech Briefs, Vol. 23, No. 2 (February 1999), page 56. To recapitulate: A CHEM structure is fabricated from a shape-memory polymer (SMP) foam. The structure is compressed to a very small volume while in its rubbery state above its glass-transition temperature (Tg). Once compressed, the structure can be cooled below Tg to its glassy state. As long as the temperature remains deploy) to its original size and shape. Once thus deployed, the CHEM structure can be rigidified by cooling below Tg to the glassy state. The structure could be subsequently reheated above Tg and recompacted. The compaction/deployment/rigidification cycle could be repeated as many times as needed.

  1. Optimal deployment of solar index

    SciTech Connect

    Croucher, Matt

    2010-11-15

    There is a growing trend, generally caused by state-specific renewable portfolio standards, to increase the importance of renewable electricity generation within generation portfolios. While RPS assist with determining the composition of generation they do not, for the most part, dictate the location of generation. Using data from various public sources, the authors create an optimal index for solar deployment. (author)

  2. Deployment of MAGDAS in Africa

    NASA Astrophysics Data System (ADS)

    Maeda, G.; Yumoto, K.; Kakinami, Y.; Tokunaga, T.; Fujimoto, A.; Ikeda, A.; Yamazaki, Y.; Abe, S.; Sakai, M.; Eto, N.; Terada, H.; Shinohara, M.; Fujita, Y.; Matsuyama, K.

    2011-12-01

    The deployment of MAGDAS (MAGnetic Data Acquisition System) began in Africa in the Year 2006 with installations along the dip equator (or "geomagnetic equator") in three countries. In 2008, the 96 Deg. MM Chain was established, running from Hermanus, South Africa, to Fayum, Egypt. In 2010, a major upgrade was performed on the equatorial stations of MAGDAS.

  3. SATWG networked quality function deployment

    NASA Technical Reports Server (NTRS)

    Brown, Don

    1992-01-01

    The initiative of this work is to develop a cooperative process for continual evolution of an integrated, time phased avionics technology plan that involves customers, technologists, developers, and managers. This will be accomplished by demonstrating a computer network technology to augment the Quality Function Deployment (QFD). All results are presented in viewgraph format.

  4. Military Deployments: Evaluating Teacher Knowledge

    ERIC Educational Resources Information Center

    Thomas, Richard M.

    2011-01-01

    This mixed method study examined the possible influence of a military deployment online tutorial on teacher knowledge. DoDEA and public school teachers were the two groups used for the study. From this exploratory study, the researcher also wanted to explore if teachers would find professional development provided in an online tutorial relevant…

  5. Geometrical deployment for braided stent.

    PubMed

    Bouillot, Pierre; Brina, Olivier; Ouared, Rafik; Yilmaz, Hasan; Farhat, Mohamed; Erceg, Gorislav; Lovblad, Karl-Olof; Vargas, Maria Isabel; Kulcsar, Zsolt; Pereira, Vitor Mendes

    2016-05-01

    The prediction of flow diverter stent (FDS) implantation for the treatment of intracranial aneurysms (IAs) is being increasingly required for hemodynamic simulations and procedural planning. In this paper, a deployment model was developed based on geometrical properties of braided stents. The proposed mathematical description is first applied on idealized toroidal vessels demonstrating the stent shortening in curved vessels. It is subsequently generalized to patient specific vasculature predicting the position of the filaments along with the length and local porosity of the stent. In parallel, in-vitro and in-vivo FDS deployments were measured by contrast-enhanced cone beam CT (CBCT) in idealized and patient-specific geometries. These measurements showed a very good qualitative and quantitative agreement with the virtual deployments and provided experimental validations of the underlying geometrical assumptions. In particular, they highlighted the importance of the stent radius assessment in the accuracy of the deployment prediction. Thanks to its low computational cost, the proposed model is potentially implementable in clinical practice providing critical information for patient safety and treatment outcome assessment. PMID:26891065

  6. Potential in-hospital modes of transmission of Legionella pneumophila. Demonstration experiments for dissemination by showers, humidifiers, and rinsing of ventilation bag apparatus.

    PubMed

    Woo, A H; Yu, V L; Goetz, A

    1986-04-01

    The mode of transmission of nosocomial legionellosis remains uncertain. Aerosolization of Legionella pneumophila by showers, humidifiers, and respiratory equipment rinsed in tap water was evaluated using plate-settling culture and air aspirator methods. All protocols simulated the actual hospital setting including use of humidifier equipment used in hospital patient rooms and water from faucets and showerheads in hospitals with nosocomial Legionnaires' disease. Protocols for humidifier and shower experiments mimicked the procedure actually used in hospitals by health care personnel. Showering failed to produce aerosols of L. pneumophila; however, portable humidifiers readily generated aerosols of L. pneumophila that disseminated throughout a two-bed patient room. Intensity of aerosolization directly correlated with the degree of L. pneumophila contamination of the tap water used to fill the humidifier. Rinsing of ventilation bag apparatus with tap water led to isolation of L. pneumophila from culture plates after the ventilation bags were squeezed. Thus, L. pneumophila could be aerosolized or directly instilled into a patient's bronchial tree following routine measures for cleaning ventilation bag apparatus with tap water. On the basis of these results, the use of humidifiers filled with tap water has been discontinued and sterile water is recommended for rinsing ventilation bag apparatus and tubing. PMID:3457525

  7. What can litter bags tell us about fauna effect on decomposition?

    NASA Astrophysics Data System (ADS)

    Frouz, J.

    2009-04-01

    Litter bags with various mesh sizes are common method to investigate role of individual size classes of soil organisms on litter decomposition in particular in investigation of fauna effect. These experiments showed that fauna in generally increased litter loss from the bags, which is interpreted as positive effect of fauna on decomposition. If the litter is presented in fine bags, all loss from the bags is likely to occur as CO2 or leaching however, in fauna accessible bags substantial amount of organic matter may loss bags as fauna excitements either because fauna migration out of the bag or just because excrement may mechanically fall out of the bag. Fauna have low assimilation efficiency so these excrements contain large amount of organic matter which is in fact not decomposed but just moved in soil profile. In order to detect this specialized microcosms techniques was applied, using two layer microcosms with litter and mineral layer, this techniques allow to measure not only amount of c that was lost from the litter bag nut also amount of c that accumulate below the bag. Thirteen experiments using these techniques in various parts of the world are revived here, these experiments showed no positive effect of fauna on C loss from the system but positive effect of fauna in litter removal from soil surface and its accumulation in mineral soil.

  8. Investigating reduced bag weight as an effective risk mediator for mason tenders.

    PubMed

    Davis, Kermit G; Kotowski, Susan E; Albers, James; Marras, William S

    2010-10-01

    Masonry workers face some of the highest physical demands in the construction industry where large bags of masonry material weighing 42.7 kg are commonly handled by mason tenders who mix the mortar, distribute mortar and bricks/blocks, and erect/dismantle scaffolding throughout the day. The objective of this study was to determine the effectiveness of using half-weight bags (21.4 kg) on reducing the biomechanical loading, physiological response, and perceived exertions. Ten male subjects performed asymmetric lifting tasks simulating unloading bags from a pallet. Muscle activity, trunk kinematics, heart rate, blood pressure and subjective rating data were collected. Spine loads were predicted from a well-validated EMG-assisted model. Bag weight, lift type, bag height at origin, and asymmetry at destination significantly impacted the spine loads. While there was a 50% reduction in bag weight, the peak loads for the half-weight bags were only 25% less than the more available full-weight bags (a reduction of about 320 N of shear and 1000 N of compression). Lifts allowing movement of the feet reduced the loads by about 22% in shear and 27% in compression compared to constrained postures. Interestingly, cumulative spine loads were greater for the lighter bags than the heavy bags ( approximately 40%). The subjective ratings of exertion and risk were significantly lower for the lighter bags. RELEVANCE TO INDUSTRY: The reduction in peak spine loading for the half-weight bags, particularly at the higher heights and when the feet were allowed to move could significantly reduce the injuries of masonry workers. However, there were trade-offs with cumulative loads that may minimize the reduced risk. Overall, given the limited amount of time lifting bags, the reduction of peak loads. PMID:20206915

  9. A combination of trastuzumab and BAG-1 inhibition synergistically targets HER2 positive breast cancer cells

    PubMed Central

    Papadakis, Emmanouil; Robson, Natalia; Yeomans, Alison; Bailey, Sarah; Laversin, Stephanie; Beers, Stephen; Sayan, A. Emre; Ashton-Key, Margaret; Schwaiger, Stefan; Stuppner, Hermann; Troppmair, Jakob; Packham, Graham; Cutress, Ramsey

    2016-01-01

    Treatment of HER2+ breast cancer with trastuzumab is effective and combination anti-HER2 therapies have demonstrated benefit over monotherapy in the neoadjuvant and metastatic settings. This study investigated the therapeutic potential of targeting the BAG-1 protein co-chaperone in trastuzumab-responsive or -resistant cells. In the METABRIC dataset, BAG-1 mRNA was significantly elevated in HER2+ breast tumors and predicted overall survival in a multivariate analysis (HR = 0.81; p = 0.022). In a breast cell line panel, BAG-1 protein was increased in HER2+ cells and was required for optimal growth as shown by siRNA knockdown. Overexpression of BAG-1S in HER2+ SKBR3 cells blocked growth inhibition by trastuzumab, whereas overexpression of a mutant BAG-1S protein (BAG-1S H3AB), defective in binding HSC70, potentiated the effect of trastuzumab. Injection of a Tet-On SKBR3 clone, induced to overexpress myc-BAG-1S into the mammary fat pads of immunocompromised mice, resulted in 2-fold larger tumors compared to uninduced controls. Induction of myc-BAG-1S expression in two Tet-On SKBR3 clones attenuated growth inhibition by trastuzumab in vitro. Targeting endogenous BAG-1 by siRNA enhanced growth inhibition of SKBR3 and BT474 cells by trastuzumab, while BAG-1 protein-protein interaction inhibitor (Thio-S or Thio-2) plus trastuzumab combination treatment synergistically attenuated growth. In BT474 cells this reduced protein synthesis, caused G1/S cell cycle arrest and targeted the ERK and AKT signaling pathways. In a SKBR3 subpopulation with acquired resistance to trastuzumab BAG-1 targeting remained effective and either Thio-2 or BAG-1 siRNA reduced growth more compared to trastuzumab-responsive parental cells. In summary, targeting BAG-1 function in combination with anti-HER2 therapy might prove beneficial. PMID:26958811

  10. Chemical, molecular, and proteomic analyses of moss bag biomonitoring in a petrochemical area of Sardinia (Italy).

    PubMed

    Cortis, Pierluigi; Vannini, Candida; Cogoni, Annalena; De Mattia, Fabrizio; Bracale, Marcella; Mezzasalma, Valerio; Labra, Massimo

    2016-02-01

    In this study, Hypnum cupressiforme moss bags were used to examine the atmospheric deposition of trace elements in the oil refinery region of Sardinia (Italy) compared with surrounding natural zones. The concentrations of 13 elements [arsenic (As), calcium (Ca), cadmium (Cd), chromium (Cr), copper (Cu), iron (Fe), potassium (K), magnesium (Mg), sodium (Na), nickel (Ni), lead (Pb), vanadium (V), and zinc (Zn)] were determined using inductively coupled plasma optical emission spectrometry. A significant accumulation of pollutants was detected using active biomonitoring with moss bags compared with a control site. The most relevant contaminants for all of the tested sites were Cr, Cu, Ni, and Zn. Moreover, the accumulation of Cr and Zn in the refinery industrial areas, IA1 and IA2, was more than five times greater than that detected at the control site. Levels of Cd, Mg, and Pb were also higher at all of the monitored sites compared with the control site. Both genomic and proteomic methods were used to study the response of H. cupressiforme to air pollution. No DNA damage or mutations were detected using the amplified fragment length polymorphisms (AFLP) method. At the protein level, 15 gel spots exhibited differential expression profiles between the moss samples collected at the IA1 site and the control site. Furthermore, among the 14 spots that showed a decrease in protein expression, nine were associated with ribulose-1,5-bisphosphate carboxylase/oxygenase (RuBisCO) and proteins of the light-harvesting complexes of photosystem (PS) II, three were associated with protein synthesis, and three were stress-related proteins. Thus, some of these proteins may represent good moss biosensors which could be used as pre-alert markers of environmental pollution. PMID:26408120

  11. Rapidly deployable emergency communication system

    DOEpatents

    Gladden, Charles A.; Parelman, Martin H.

    1979-01-01

    A highly versatile, highly portable emergency communication system which permits deployment in a very short time to cover both wide areas and distant isolated areas depending upon mission requirements. The system employs a plurality of lightweight, fully self-contained repeaters which are deployed within the mission area to provide communication between field teams, and between each field team and a mobile communication control center. Each repeater contains a microcomputer controller, the program for which may be changed from the control center by the transmission of digital data within the audible range (300-3,000 Hz). Repeaters are accessed by portable/mobile transceivers, other repeaters, and the control center through the transmission and recognition of digital data code words in the subaudible range.

  12. Arusha Rover Deployable Medical Workstation

    NASA Technical Reports Server (NTRS)

    Boswell, Tyrone; Hopson, Sonya; Marzette, Russell; Monroe, Gilena; Mustafa, Ruqayyah

    2014-01-01

    The NSBE Arusha rover concept offers a means of human transport and habitation during long-term exploration missions on the moon. This conceptual rover calls for the availability of medical supplies and equipment for crew members in order to aid in mission success. This paper addresses the need for a dedicated medical work station aboard the Arusha rover. The project team investigated multiple options for implementing a feasible deployable station to address both the medical and workstation layout needs of the rover and crew. Based on layout specifications and medical workstation requirements, the team has proposed a deployable workstation concept that can be accommodated within the volumetric constraints of the Arusha rover spacecraft

  13. Lunar roving vehicle deployment mechanism

    NASA Technical Reports Server (NTRS)

    Hunter, A. B.; Spacey, B. W.

    1972-01-01

    The space support equipment that supports the lunar roving vehicle during the flight to the moon and permits the vehicle to be deployed from the lunar module onto the lunar surface with a minimum amount of astronaut participation is discussed. The design and evolution of the equipment are reviewed. The success of the overall lunar roving vehicle design, including the space support equipment, was demonstrated on the Apollo 15 and 16 missions.

  14. Deployable M-Braced Truss

    NASA Technical Reports Server (NTRS)

    Mikulas, M. M., Jr.; Rhodes, M. D.

    1985-01-01

    Tension/compression and shear separated structurally in deployable beam. M-Braced Sections Packaged using combination of hinges and telescoping sections. When upper sections telescope into base, diagonals hinge, telescope, and rotate along batten. Components of M-braced truss fabricated from conventional metallic materials or nonmetallic materials such as graphite/epoxy. Applications include masts for antenna feed horns and ribs for solar array blankets.

  15. High-performance, flexible, deployable array development for space applications

    NASA Technical Reports Server (NTRS)

    Gehling, Russell N.; Armstrong, Joseph H.; Misra, Mohan S.

    1994-01-01

    Flexible, deployable arrays are an attractive alternative to conventional solar arrays for near-term and future space power applications, particularly due to their potential for high specific power and low storage volume. Combined with low-cost flexible thin-film photovoltaics, these arrays have the potential to become an enabling or an enhancing technology for many missions. In order to expedite the acceptance of thin-film photovoltaics for space applications, however, parallel development of flexible photovoltaics and the corresponding deployable structure is essential. Many innovative technologies must be incorporated in these arrays to ensure a significant performance increase over conventional technologies. For example, innovative mechanisms which employ shape memory alloys for storage latches, deployment mechanisms, and array positioning gimbals can be incorporated into flexible array design with significant improvement in the areas of cost, weight, and reliability. This paper discusses recent activities at Martin Marietta regarding the development of flexible, deployable solar array technology. Particular emphasis is placed on the novel use of shape memory alloys for lightweight deployment elements to improve the overall specific power of the array. Array performance projections with flexible thin-film copper-indium-diselenide (CIS) are presented, and government-sponsored solar array programs recently initiated at Martin Marietta through NASA and Air Force Phillips Laboratory are discussed.

  16. Expected Deployment Dynamics of Proseds

    NASA Technical Reports Server (NTRS)

    Lorenzini, E. C.; Cosmo, M. L.; Welzyn, K.

    2003-01-01

    The control law for The Propulsive Small Expendable Deployment System (ProSEDS) deployment is a modification of the control routine that was successfully used in the flight of SEDS-II. Unlike SEDS, the tether of ProSEDS consists of different sections with different mechanical characteristics. A non-linear control trajectory in phase-space (i.e., the reference profile) is fed forward to the controller to guide the satellite, at the tether tip, to the desired final state under nominal conditions and no external perturbations. A linear feedback control is applied by the brake to keep the actual trajectory as close as possible to the reference. The paper also shows the results of simulations of deployment dynamics with and without noise. The control law has thus far been developed and tested on the ground for the original ProSEDS tether configuration of 15 km. A new reference will have to be designed and tested for other tether configurations.

  17. Surface modification of closed plastic bags for adherent cell cultivation

    NASA Astrophysics Data System (ADS)

    Lachmann, K.; Dohse, A.; Thomas, M.; Pohl, S.; Meyring, W.; Dittmar, K. E. J.; Lindenmeier, W.; Klages, C.-P.

    2011-07-01

    In modern medicine human mesenchymal stem cells are becoming increasingly important. However, a successful cultivation of this type of cells is only possible under very specific conditions. Of great importance, for instance, are the absence of contaminants such as foreign microbiological organisms, i.e., sterility, and the chemical functionalization of the ground on which the cells are grown. As cultivation of these cells makes high demands, a new procedure for cell cultivation has been developed in which closed plastic bags are used. For adherent cell growth chemical functional groups have to be introduced on the inner surface of the plastic bag. This can be achieved by a new, atmospheric-pressure plasma-based method presented in this paper. The method which was developed jointly by the Fraunhofer IST and the Helmholtz HZI can be implemented in automated equipment as is also shown in this contribution. Plasma process gases used include helium or helium-based gas mixtures (He + N2 + H2) and vapors of suitable film-forming agents or precursors such as APTMS, DACH, and TMOS in helium. The effect of plasma treatment is investigated by FTIR-ATR spectroscopy as well as surface tension determination based on contact angle measurements and XPS. Plasma treatment in nominally pure helium increases the surface tension of the polymer foil due to the presence of oxygen traces in the gas and oxygen diffusing through the gas-permeable foil, respectively, reacting with surface radical centers formed during contact with the discharge. Primary amino groups are obtained on the inner surface by treatment in mixtures with nitrogen and hydrogen albeit their amount is comparably small due to diffusion of oxygen through the gas-permeable bag, interfering with the plasma-amination process. Surface modifications introducing amino groups on the inner surface turned out to be most efficient in the promotion of cell growth.

  18. Stability of Diluted Adenosine Solutions in Polyolefin Infusion Bags

    PubMed Central

    Almagambetova, Elise; Hutchinson, David; Blais, Danielle M.; Zhao, Fang

    2013-01-01

    Background: Intravenous or intracoronary adenosine is used in the cardiac catherization lab to achieve maximal coronary blood flow and determine fractional flow reserve. Objective: To determine the stability of adenosine 10 and 50 µg/mL in either 0.9% sodium chloride injection or 5% dextrose injection in polyolefin infusion bags stored at 2 temperatures, refrigeration (2°C-8°C) or controlled room temperature (20°C-25°C). Methods: Adenosine 10 µg/mL and 50 µg/mL solutions were prepared in 50 mL polyolefin infusion bags containing 0.9% sodium chloride injection or 5% dextrose injection and stored at controlled room temperature or under refrigeration. Each combination of concentration, diluent, and storage was prepared in triplicate. Samples were assayed using stability-indicating, reversed-phase high-performance liquid chromatography immediately at time 0 and at 24 hours, 48 hours, 7 days, and 14 days. Stability was defined as retaining 90% to 110% of the initial adenosine concentration. The samples were also visually inspected against a light background for clarity, color, and the presence of particulate matter. Results: After 14 days, all samples retained 99% to 101% of the initial adenosine concentration. No considerable change in pH or visual appearance was noted. The stability data indicated no significant loss of drug due to chemical degradation or physical interactions during storage. Conclusion: Adenosine solutions of 10 and 50 µg/mL were stable for at least 14 days in 50 mL polyolefin infusion bags of 0.9% sodium chloride injection or 5% dextrose injection stored at controlled room temperature and refrigerated conditions. PMID:24421510

  19. Nicotine inhibits potassium currents in Aplysia bag cell neurons.

    PubMed

    White, Sean H; Sturgeon, Raymond M; Magoski, Neil S

    2016-06-01

    Acetylcholine and the archetypal cholinergic agonist, nicotine, are typically associated with the opening of ionotropic receptors. In the bag cell neurons, which govern the reproductive behavior of the marine snail, Aplysia californica, there are two cholinergic responses: a relatively large acetylcholine-induced current and a relatively small nicotine-induced current. Both currents are readily apparent at resting membrane potential and result from the opening of distinct ionotropic receptors. We now report a separate current response elicited by applying nicotine to cultured bag cell neurons under whole cell voltage-clamp. This current was ostensibly inward, best resolved at depolarized voltages, presented a noncooperative dose-response with a half-maximal concentration near 1.5 mM, and associated with a decrease in membrane conductance. The unique nicotine-evoked response was not altered by intracellular perfusion with the G protein blocker GDPβS or exposure to classical nicotinic antagonists but was occluded by replacing intracellular K(+) with Cs(+) Consistent with an underlying mechanism of direct inhibition of one or more K(+) channels, nicotine was found to rapidly reduce the fast-inactivating A-type K(+) current as well as both components of the delayed-rectifier K(+) current. Finally, nicotine increased bag cell neuron excitability, which manifested as reduction in spike threshold, greater action potential height and width, and markedly more spiking to continuous depolarizing current injection. In contrast to conventional transient activation of nicotinic ionotropic receptors, block of K(+) channels could represent a nonstandard means for nicotine to profoundly alter the electrical properties of neurons over prolonged periods of time. PMID:26864763

  20. Bogota Bag Use in Planned Re-Laparotomies

    PubMed Central

    Karakose, Oktay; Benzin, Mehmet Fatih; Pülat, Huseyin; Sabuncuoglu, Mehmet Zafer; Eken, Huseyin; Zihni, Ismail; Barut, Ibrahim

    2016-01-01

    Background Planned re-laparotomies are a series of surgical interventions that are rarely used and have a high mortality rate. The aim of this study was to investigate the factors affecting mortality and the effectiveness of the use of the Bogota bag for temporary closure of the abdomen in patients for whom re-laparotomy was planned. Material/Methods A retrospective examination was made of data of patients in whom a Bogota bag was used in planned re-laparotomies for various reasons in the General Surgery Department of Suleyman Demirel University Medical Faculty between June 2008 and April 2014. Results Bogota bags were used in a total of 38 patients, comprising 23 (60.5%) males and 15 (39.5%) females, with a mean age of 58.94±17.89 years. The mean period of hospitalization was 14.5 days (range, 1–143 days) and the mean number of operations during that time was 3 (range, 1–11). The mean duration of intensive care unit stay was 6 days (range, 1–143 days). Malignancy was determined in 8 patients (21.1%). Indications were intra-abdominal sepsis in 23 patients (60.5%), mesenteric vascular disease in 10 patients (26.3%), and packing was required in 5 patients (13.2%). Mortality developed in 25 patients (65.8%). A significant relationship was determined between mortality and a diagnosis of mesenteric artery ischemia (p: 0.035). The mortality rate was 56% (n: 13) in patients diagnosed with intra-abdominal sepsis. A relationship was determined between mortality and age (p: 0.015), duration of hospital stay (p: 0.007), need for cardiac inotrope (p: 0.01), and need for mechanical ventilation (p: 0.01). The mean Apache II score was 26.4±5 for patients who died and 15.8±5.2 for surviving patients (p<0.001). In 5 (38.4%) of the 13 surviving patients, primary repair was applied to the abdomen, and in the remaining 8 patients abdominal wall repair was performed using dual mesh. Conclusions In patients in whom a Bogota bag was used, which is a cheap and easy method for

  1. Use of Vacuum Bagging for Fabricating Thermoplastic Microfluidic Devices

    PubMed Central

    Cassano, Christopher L.; Simon, Andrew J.; Liu, Wei; Fredrickson, Carl; Fan, Z. Hugh

    2014-01-01

    In this work we present a novel thermal bonding method for thermoplastic microfluidic devices. This simple method employs a modified vacuum bagging technique, a concept borrowed from the aerospace industry, to produce conventional thick substrate microfluidic devices, as well as multi-layer film devices. The bonds produced using this method are superior to those obtained using conventional thermal bonding methods, including thermal lamination, and are capable of sustaining burst pressures in excess of 550 kPa. To illustrate the utility of this method, thick substrate devices were produced, as well as a six-layer film device that incorporated several complex features. PMID:25329244

  2. Bogota Bag Use in Planned Re-Laparotomies.

    PubMed

    Karakose, Oktay; Fatih Benzin, Mehmet; Pülat, Huseyin; Zafer Sabuncuoglu, Mehmet; Eken, Huseyin; Zihni, Ismail; Barut, Ibrahim

    2016-01-01

    BACKGROUND Planned re-laparotomies are a series of surgical interventions that are rarely used and have a high mortality rate. The aim of this study was to investigate the factors affecting mortality and the effectiveness of the use of the Bogota bag for temporary closure of the abdomen in patients for whom re-laparotomy was planned. MATERIAL AND METHODS A retrospective examination was made of data of patients in whom a Bogota bag was used in planned re-laparotomies for various reasons in the General Surgery Department of Suleyman Demirel University Medical Faculty between June 2008 and April 2014. RESULTS Bogota bags were used in a total of 38 patients, comprising 23 (60.5%) males and 15 (39.5%) females, with a mean age of 58.94±17.89 years. The mean period of hospitalization was 14.5 days (range, 1-143 days) and the mean number of operations during that time was 3 (range, 1-11). The mean duration of intensive care unit stay was 6 days (range, 1-143 days). Malignancy was determined in 8 patients (21.1%). Indications were intra-abdominal sepsis in 23 patients (60.5%), mesenteric vascular disease in 10 patients (26.3%), and packing was required in 5 patients (13.2%). Mortality developed in 25 patients (65.8%). A significant relationship was determined between mortality and a diagnosis of mesenteric artery ischemia (p: 0.035). The mortality rate was 56% (n: 13) in patients diagnosed with intra-abdominal sepsis. A relationship was determined between mortality and age (p: 0.015), duration of hospital stay (p: 0.007), need for cardiac inotrope (p: 0.01), and need for mechanical ventilation (p: 0.01). The mean Apache II score was 26.4±5 for patients who died and 15.8±5.2 for surviving patients (p<0.001). In 5 (38.4%) of the 13 surviving patients, primary repair was applied to the abdomen, and in the remaining 8 patients abdominal wall repair was performed using dual mesh. CONCLUSIONS In patients in whom a Bogota bag was used, which is a cheap and easy method for

  3. A One-Piece Lunar Regolith Bag Garage Prototype

    NASA Technical Reports Server (NTRS)

    Smithers, G. A.; Nehls, M. K.; Hovater, M. A.; Evans, S. W.; Miller, J. S.; Broughton, R. M., Jr.; Beale, D.; Kilinc-Balci, F.

    2007-01-01

    Shelter structures on the moon, even in early phases of exploration, should incorporate lunar materials as much as possible. This Technical Memorandum details the design and construction of a prototype for a one-piece regolith bag unpressurized garage concept and a materials testing program to investigate six candidate fabrics to learn how they might perform in the lunar environment. The conceptualization was that a lightweight fabric form be launched from Earth and landed on the lunar surface to be robotically filled with raw lunar regolith. Regolith bag fabric candidates included: Vectran(TM), Nextel(TM), Gore PTFE Fabric(TM), Zylon(TM), Twaron(TM), and Nomex(TM). Tensile (including post radiation exposure), fold, abrasion, and hypervelocity impact testing were performed under ambient conditions, and also performed under cold and elevated temperatures. In some cases, Johnson Space Center lunar simulant (JSC-1) was used in conjunction with testing. A series of preliminary structures was constructed during final prototype design based on the principles of the classic masonry arch. The prototype was constructed of Kevlar(TM) and filled with vermiculite. The structure is free-standing, but has not yet been load tested. Future plans would be to construct higher fidelity prototypes and to conduct appropriate tests of the structure.

  4. Evaluation of Phenylephrine Stability in Polyvinyl Chloride Bags

    PubMed Central

    Oldland, Alan R.; Kiser, Tyree H.

    2014-01-01

    Abstract Purpose: Phenylephrine hydrochloride (HCl) is commonly used to maintain adequate blood pressure during shock and shocklike states. Phenylephrine is prepared in concentrated stock vials that require further dilution prior to administration. This study evaluated the physical and chemical stability of phenylephrine in extemporaneously prepared polyvinyl chloride (PVC) bags. Methods: Phenylephrine HCl 10 mg/mL solution was diluted with 0.9% sodium chloride for injection to final concentrations of 200 µg/mL and 400 µg/mL and stored at room temperature (23°C-25°C) exposed to fluorescent light. Stability of phenylephrine HCl was evaluated by high-performance liquid chromatography on days 0, 7, 14, 21, 30, 45, and 60. Results: Phenylephrine HCl 200 and 400 µg/mL solutions in PVC bags were physically stable during the entire 60-day study period. Phenylephrine HCl retained > 95% of the original concentration. Conclusion: Phenylephrine HCl diluted to 200 or 400 µg/mL with 0.9% sodium chloride for injection is both physically and chemically stable for a period of 60 days with ≤5% degradation when stored at room temperature and exposed to fluorescent lighting. PMID:24958958

  5. Development of High Efficiency Ventilation Bag Actuated Dry Powder Inhalers

    PubMed Central

    Behara, Srinivas R.B.; Longest, P. Worth; Farkas, Dale R.; Hindle, Michael

    2014-01-01

    New active dry powder inhaler systems were developed and tested to efficiently aerosolize a carrier-free formulation. To assess inhaler performance, a challenging case study of aerosol lung delivery during high-flow nasal cannula (HFNC) therapy was selected. The active delivery system consisted of a ventilation bag for actuating the device, the DPI containing a flow control orifice and 3D rod array, and streamlined nasal cannula with separate inlets for the aerosol and HFNC therapy gas. In vitro experiments were conducted to assess deposition in the device, emitted dose (ED) from the nasal cannula, and powder deaggregation. The best performing systems achieved EDs of 70–80% with fine particle fractions <5 μm of 65–85% and mass median aerodynamic diameters of 1.5 μm, which were target conditions for controlled condensational growth aerosol delivery. Decreasing the size of the flow control orifice from 3.6 to 2.3 mm reduced the flow rate through the system with manual bag actuations from an average of 35 to 15 LPM, while improving ED and aerosolization performance. The new devices can be applied to improve aerosol delivery during mechanical ventilation, nose-to-lung aerosol administration, and to assist patients that cannot reproducibly use passive DPIs. PMID:24508552

  6. RSG Deployment Case Testing Results

    SciTech Connect

    Owsley, Stanley L.; Dodson, Michael G.; Hatchell, Brian K.; Seim, Thomas A.; Alexander, David L.; Hawthorne, Woodrow T.

    2005-09-01

    The RSG deployment case design is centered on taking the RSG system and producing a transport case that houses the RSG in a safe and controlled manner for transport. The transport case was driven by two conflicting constraints, first that the case be as light as possible, and second that it meet a stringent list of Military Specified requirements. The design team worked to extract every bit of weight from the design while striving to meet the rigorous Mil-Spec constraints. In the end compromises were made primarily on the specification side to control the overall weight of the transport case. This report outlines the case testing results.

  7. Disposable telemetry cable deployment system

    DOEpatents

    Holcomb, David Joseph

    2000-01-01

    A disposable telemetry cable deployment system for facilitating information retrieval while drilling a well includes a cable spool adapted for insertion into a drill string and an unarmored fiber optic cable spooled onto the spool cable and having a downhole end and a stinger end. Connected to the cable spool is a rigid stinger which extends through a kelly of the drilling apparatus. A data transmission device for transmitting data to a data acquisition system is disposed either within or on the upper end of the rigid stinger.

  8. Carrying shopping bags does not alter static postural stability and gait parameters in healthy older females.

    PubMed

    Bampouras, Theodoros M; Dewhurst, Susan

    2016-05-01

    Food shopping is an important aspect of maintaining independence and social interaction in older age. Carriage of shopping bags alters the body's weight distribution which, depending on load distribution, could potentially increase instability during standing and walking. The study examined the effect of carrying UK style shopping bags on static postural stability and gait in healthy older and young females. Nine older (71.0±6.0 years) and 10 young (26.7±5.2 years) females were assessed in five conditions carrying no bags, one 1.5kg bag in each hand, one 3kg bag in each hand, one 1.5kg bag in preferred hand, one 3kg bag in preferred hand. Antero-posterior and medio-lateral displacement, and 95% ellipse area from a 30s quiet standing were used for postural stability assessment. Stride length and its coefficient of variation, total double support time, step asymmetry and gait stability ratio were calculated from 1min treadmill walking at self-selected speed for gait assessment. Carrying shopping bags did not negatively affect postural stability or gait variables, in either group. Further, in older individuals, a decrease in sway velocity was found when holding bags during the postural stability assessment (p<0.05), suggesting that carriage of bags, irrespective of the load distribution, may have a stabilising effect during quiet standing. These results should help to alleviate concerns regarding safety of carrying shopping bags and help encourage shopping, both as a social and as a physical activity. PMID:27131182

  9. UAV Deployed Sensor System for Arctic Ocean Remote Sensing

    NASA Astrophysics Data System (ADS)

    Palo, S. E.; Lawrence, D.; Weibel, D.; LoDolce, G.; Krist, S.; Crocker, I.; Maslanik, J. A.

    2012-12-01

    The Marginal Ice Zone Observations and Processes Experiment (MIZOPEX), is an Arctic field project scheduled for summer 2013. The goals of the project are to understand how warming of the marginal ice zone affects sea ice melt and if this warming has been over or underestimated by satellite measurements. To achieve these goals calibrated physical measurements, both remote and in-situ, of the marginal ice zone over scales of square kilometers with a resolution of square meters is required. This will be accomplished with a suite of unmanned aerial vehicles (UAVs) equipped with both remote sensing and in-situ instruments, air deployed microbuoys, and ship deployed buoys. In this talk we will present details about the air-deployed micro-buoy (ADMB) and self-deployed surface-sonde (SDSS) components of the MIZOPEX project, developed at the University of Colorado. These systems were designed to explore the potential of low-cost, on-demand access to high-latitude areas of important scientific interest. Both the ADMB and SDSS share a common measurement suite with the capability to measure water temperature at three distinct depths and provide position information via GPS. The ADMBs are dropped from the InSitu ScanEagle UAV and expected to operate and log ocean temperatures for 14 days. The SDSS are micro UAVs that are designed to fly one-way to a region of interest and land at specified coordinates, thereafter becoming a surface sensor similar to the ADMB. A ScanEagle will periodically return to the deployment zone to gather ADMB/SDSS data via low power radio links. Design decisions based upon operational constraints and the current status of the ADMB and SDSS will be presented.

  10. Qualification of the Tropical Rainfall Measuring Mission Solar Array Deployment System

    NASA Technical Reports Server (NTRS)

    Lawrence, Jon

    1998-01-01

    The Tropical Rainfall Measuring Mission (TRMM) solar arrays are placed into orbital configuration by a complex deployment system. Its two wings each comprise twin seven square solar panels located by a twelve foot articulated boom. The four spring-driven hinge lines per wing are rate-limited by viscous dampers. The wings are stowed against the spacecraft kinematically, and released by five pyrotechnically-actuated mechanisms. Since deployment failure would be catastrophic, a total of 17 deployment tests were completed to qualify the system for the worst cast launch environment. This successful testing culminated in the flawless deployment of the solar arrays on orbit, 15 minutes after launch in November 1997. The custom gravity negation system used to perform deployment testing is modular to allow its setup in several locations, including the launch site in Japan. Both platform and height can be varied, to meet the requirements of the test configuration and the test facility. Its air pad floatation system meets tight packaging requirements, allowing installation while stowed against the spacecraft without breaking any flight interfaces, and avoiding interference during motion. This system was designed concurrently with the deployment system, to facilitate its installation, to aid in the integration of the flight system to the spacecraft, while demonstrating deployment capabilities. Critical parameters for successful testing were alignment of deployment axes and tables to gravity, alignment of table seams to minimize discontinuities, and minimizing pressure drops in the air supply system. Orbital performance was similar to that predicted by ground testing.

  11. Sequentially deployable maneuverable tetrahedral beam

    NASA Technical Reports Server (NTRS)

    Mikulas, M. M., Jr.; Crawford, R. F. (Inventor)

    1985-01-01

    A tetrahedral beam that can be compactly stowed, sequentially deployed, and widely manipulated to provide a structurally sound yet highly maneuverable truss structure is comprised of a number of repeating units of tandem tetralhedral sharing common sides. Fixed length battens are jointed into equilateral triangles called batten frames. Apexes of adjacent triangles are interconnected by longerons having a mid-point folding hinge. Joints, comprised of gussets pivotabley connected by links, permit two independent degrees of rotational freedom between joined adjacent batten frames, and provide a stable structure from packaged configuration to complete deployment. The longerons and joints can be actuated in any sequence, independently of one another. The beam is suited to remote actuation. Longerons may be provided with powered mid-point hinges enabling beam erection and packaging under remote control. Providing one or more longerons with powered telescoping segments permits the shape of the beam central axis to be remotely manipulated so that the beam may function as a remote manipulator arm.

  12. Sequentially deployable maneuverable tetrahedral beam

    NASA Astrophysics Data System (ADS)

    Mikulas, M. M., Jr.; Crawford, R. F.

    1985-12-01

    A tetrahedral beam that can be compactly stowed, sequentially deployed, and widely manipulated to provide a structurally sound yet highly maneuverable truss structure is comprised of a number of repeating units of tandem tetralhedral sharing common sides. Fixed length battens are jointed into equilateral triangles called batten frames. Apexes of adjacent triangles are interconnected by longerons having a mid-point folding hinge. Joints, comprised of gussets pivotabley connected by links, permit two independent degrees of rotational freedom between joined adjacent batten frames, and provide a stable structure from packaged configuration to complete deployment. The longerons and joints can be actuated in any sequence, independently of one another. The beam is suited to remote actuation. Longerons may be provided with powered mid-point hinges enabling beam erection and packaging under remote control. Providing one or more longerons with powered telescoping segments permits the shape of the beam central axis to be remotely manipulated so that the beam may function as a remote manipulator arm.

  13. Deployment Mechanism for Thermal Pointing System

    NASA Technical Reports Server (NTRS)

    Koski, Kraig

    2014-01-01

    The Deployment Mechanism for the Total and Spectral Solar Irradiance Sensor (TSIS) is responsible for bringing the Thermal Pointing System (TPS) from its stowed, launch locked position to the on-orbit deployed, operational position. The Deployment Mechanism also provides structural support for the TSIS optical bench and two-axis gimbal. An engineering model of the Deployment Mechanism has been environmentally qualified and life tested. This paper will give an overview of the TSIS mission and then describe the development, design, and testing of the Deployment Mechanism.

  14. Supporting Knowledge Transfer in IS Deployment Projects

    NASA Astrophysics Data System (ADS)

    Schönström, Mikael

    To deploy new information systems is an expensive and complex task, and does seldom result in successful usage where the system adds strategic value to the firm (e.g. Sharma et al. 2003). It has been argued that innovation diffusion is a knowledge integration problem (Newell et al. 2000). Knowledge about business processes, deployment processes, information systems and technology are needed in a large-scale deployment of a corporate IS. These deployments can therefore to a large extent be argued to be a knowledge management (KM) problem. An effective deployment requires that knowledge about the system is effectively transferred to the target organization (Ko et al. 2005).

  15. Gene cloning and characterization of the protein encoded by the Neospora caninum bradyzoite-specific antigen gene BAG1.

    PubMed

    Kobayashi, T; Narabu, S; Yanai, Y; Hatano, Y; Ito, A; Imai, S; Ike, K

    2013-06-01

    Neospora caninum is an Apicomplexan parasite that causes repeated abortion and stillbirth in cattle. The aim of this study was to clone the gene encoding the N. caninum orthologue (NcBAG1) of the Toxoplasma gondii bradyzoite-specific protein TgBAG1 and characterize its expression pattern in the parasite. Isolation of the full-length 684-bp gene revealed that it shared 78.3% sequence similarity with TgBAG1. NcBAG1 encodes a predicted protein of 227 amino acids with 80.3% similarity to TgBAG1. A putative signal peptide sequence and an invariant GVL motif characteristic of small heat-shock proteins were identified in the predicted N. caninum amino acid sequence. We expressed the NcBAG1 gene as a recombinant glutathione S-transferase fusion protein (rNcBAG1) in Escherichia coli and used the purified 60 kDa protein to obtain a monoclonal antibody (Mab). rNcBAG1 reacted to Mabs specific for NcBAG1 and TgBAG1. No reaction between the NcBAG1 Mab and N. caninum tachyzoites was observed. Although the predicted molecular mass of NcBAG1 is 25 kDa, Western blot analysis of parasite lysates using the NcBAG1 Mab revealed a cross-reactive protein of approximately 30 kDa. Additionally, immunofluorescence assays using the tachyzoite-specific Mab for NcSAG1 and the bradyzoite-specific Mab for TgBAG1 or NcSAG4 revealed NcBAG1-specific expression in bradyzoites in cultures exposed to sodium nitroprusside, a reagent that increases the frequency of bradyzoites. Interestingly, the NcBAG1 protein was identified in the cytoplasm of the bradyzoite-stage parasites. This preliminary analysis of the NcBAG1 gene will assist investigations into the role of this protein in N. caninum . PMID:23245337

  16. GRP78 Interacting Partner Bag5 Responds to ER Stress and Protects Cardiomyocytes From ER Stress-Induced Apoptosis.

    PubMed

    Gupta, Manish K; Tahrir, Farzaneh G; Knezevic, Tijana; White, Martyn K; Gordon, Jennifer; Cheung, Joseph Y; Khalili, Kamel; Feldman, Arthur M

    2016-08-01

    Bag5 is a member of the BAG family of molecular chaperone regulators and is unusual in that it consists of five BAG domains, which function as modulators of chaperone activity. Bag family proteins play a key role in cellular as well as in cardiac function and their differential expression is reported in heart failure. In this study, we examined the importance of a Bag family member protein, Bag5, in cardiomyocytes during endoplasmic reticulum (ER) stress. We found that expression of Bag5 in cardiomyocytes is significantly increased with the induction of ER stress in a time dependent manner. We have taken gain-in and loss-of functional approaches to characterize Bag5 protein function in cardiomyocytes. Adenoviral mediated expression of Bag5 significantly decreased cell death as well as improved cellular viability in ER stress. Along with this, ER stress-induced CHOP protein expression is significantly decreased in cells that overexpress Bag5. Conversely, we found that siRNA-mediated knockdown of Bag5 caused cell death, increased cytotoxicity, and decreased cellular viability in cardiomyocytes. Mechanistically, we found that Bag5 protein expression is significantly increased in the ER during ER stress and that this in turn modulates GRP78 protein stability and reduces ER stress. This study suggests that Bag5 is an important regulator of ER function and so could be exploited as a tool to improve cardiomyocyte function under stress conditions. J. Cell. Biochem. 117: 1813-1821, 2016. © 2016 Wiley Periodicals, Inc. PMID:26729625

  17. Subcellular localisation of BAG-1 and its regulation of vitamin D receptor-mediated transactivation and involucrin expression in oral keratinocytes: Implications for oral carcinogenesis

    SciTech Connect

    Lee, San San; Crabb, Simon J.; Janghra, Nari; Carlberg, Carsten; Williams, Ann C.; Cutress, Ramsey I.; Packham, Graham; Hague, Angela

    2007-09-10

    In oral cancers, cytoplasmic BAG-1 overexpression is a marker of poor prognosis. BAG-1 regulates cellular growth, differentiation and survival through interactions with diverse proteins, including the vitamin D receptor (VDR), a key regulator of keratinocyte growth and differentiation. BAG-1 is expressed ubiquitously in human cells as three major isoforms of 50 kDa (BAG-1L), 46 kDa (BAG-1M) and 36 kDa (BAG-1S) from a single mRNA. In oral keratinocytes BAG-1L, but not BAG-1M and BAG-1S, enhanced VDR transactivation in response to 1{alpha},25-dihydroxyvitamin D{sub 3.} BAG-1L was nucleoplasmic and nucleolar, whereas BAG-1S and BAG-1M were cytoplasmic and nucleoplasmic in localisation. Having identified the nucleolar localisation sequence in BAG-1L, we showed that mutation of this sequence did not prevent BAG-1L from potentiating VDR activity. BAG-1L also potentiated transactivation of known vitamin-D-responsive gene promoters, osteocalcin and 24-hydroxylase, and enhanced VDR-dependent transcription and protein expression of the keratinocyte differentiation marker, involucrin. These results demonstrate endogenous gene regulation by BAG-1L by potentiating nuclear hormone receptor function and suggest a role for BAG-1L in 24-hydroxylase regulation of vitamin D metabolism and the cellular response of oral keratinocytes to 1{alpha},25-dihydroxyvitamin D{sub 3}. By contrast to the cytoplasmic BAG-1 isoforms, BAG-1L may act to suppress tumorigenesis.

  18. Air-depolyable geophysics package

    SciTech Connect

    Hunter, S.L.; Harben, P.E.

    1993-11-01

    We are using Lawrence Livermore National Laboratory`s (LLNL`s) diverse expertise to develop a geophysical monitoring system that can survive being dropped into place by a helicopter or airplane. Such an air-deployable system could significantly decrease the time and effort needed to set up such instruments in remote locations following a major earthquake or volcanic eruption. Most currently available geophysical monitoring and survey systems, such as seismic monitoring stations, use sensitive, fragile instrumentation that requires personnel trained and experienced in data acquisition and field setup. Rapid deployment of such equipment can be difficult or impossible. Recent developments in low-power electronics, new materials, and sensors that are resistant to severe impacts have made it possible to develop low-cost geophysical monitoring packages for rapid deployment missions. Our strategy was to focus on low-cost battery-powered systems that would have a relatively long (several months) operational lifetime. We concentrated on the conceptual design and engineering of a single-component seismic system that could survive an air-deployment into an earth material, such as alluvium. Actual implementation of such a system is a goal of future work on this concept. For this project, we drew on LLNL`s Earth Sciences Department, Radio Shop, Plastics Shop, and Weapons Program. The military has had several programs to develop air-deployed and cannon-deployed seismometers. Recently, a sonobuoy manufacturer has offered an air-deployable geophone designed to make relatively soft landings.

  19. CaM/BAG5/Hsc70 signaling complex dynamically regulates leaf senescence.

    PubMed

    Li, Luhua; Xing, Yangfei; Chang, Dong; Fang, Shasha; Cui, Boyang; Li, Qi; Wang, Xuejie; Guo, Shang; Yang, Xue; Men, Shuzhen; Shen, Yuequan

    2016-01-01

    Calcium signaling plays an essential role in plant cell physiology, and chaperone-mediated protein folding directly regulates plant programmed cell death. The Arabidopsis thaliana protein AtBAG5 (Bcl-2-associated athanogene 5) is unique in that it contains both a BAG domain capable of binding Hsc70 (Heat shock cognate protein 70) and a characteristic IQ motif that is specific for Ca(2+)-free CaM (Calmodulin) binding and hence acts as a hub linking calcium signaling and the chaperone system. Here, we determined crystal structures of AtBAG5 alone and in complex with Ca(2+)-free CaM. Structural and biochemical studies revealed that Ca(2+)-free CaM and Hsc70 bind AtBAG5 independently, whereas Ca(2+)-saturated CaM and Hsc70 bind AtBAG5 with negative cooperativity. Further in vivo studies confirmed that AtBAG5 localizes to mitochondria and that its overexpression leads to leaf senescence symptoms including decreased chlorophyll retention and massive ROS production in dark-induced plants. Mutants interfering the CaM/AtBAG5/Hsc70 complex formation leads to different phenotype of leaf senescence. Collectively, we propose that the CaM/AtBAG5/Hsc70 signaling complex plays an important role in regulating plant senescence. PMID:27539741

  20. 75 FR 22842 - Polyethylene Retail Carrier Bags From Indonesia, Taiwan, and Vietnam

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-30

    ... publishing the notice in the Federal Register of December 3, 2009 (74 FR 63410). The hearing was held in... COMMISSION Polyethylene Retail Carrier Bags From Indonesia, Taiwan, and Vietnam Determinations On the basis... imports from Vietnam of polyethylene retail carrier bags (PRCBs), provided for in subheading 3923.21.00...

  1. Casimir bag energy in the stochastic approximation to the pure QCD vacuum

    SciTech Connect

    Fosco, C. D.; Oxman, L. E.

    2007-01-15

    We study the Casimir contribution to the bag energy coming from gluon field fluctuations, within the context of the stochastic vacuum model of pure QCD. After formulating the problem in terms of the generating functional of field strength cumulants, we argue that the resulting predictions about the Casimir energy are compatible with the phenomenologically required bag energy term.

  2. Involvement of Bcl-2-associated athanogene (BAG)-family proteins in the neuroprotection by rasagiline

    PubMed Central

    Guo, Ji-Feng; He, Shuang; Kang, Ji-Feng; Xu, Qian; Hu, Ya-Cen; Zhang, Hai-Nan; Wang, Chun-Yu; Yan, Xin-Xiang; Tang, Bei-Sha

    2015-01-01

    Rasagiline, a novel monoamine oxidase (MAO)-B inhibitor, has a mild to moderate effect in relieving Parkinson’s disease (PD) symptoms as well as unique neuroprotective effects. Previous studies demonstrated rasagiline protect neurons by regulating Bcl-2 family proteins. Our study aimed to study whether Bcl-2-associated athanogene (BAG)-family proteins, which were reported closely associated with neurodegenerative disease, were involved in the neuroprotective effect of rasagiline. We found that after the administration of 1-methy1-4-phenvl-1,2,3,6-tetrahvdropvridine (MPTP), BAG2 and BAG5 proteins were up-regulated in the substantia nigra dopaminergic neurons of PD mouse model. A further increase of BAG2 and BAG5 was detected after intragastric administration of rasagiline to post-MPTP lesioned mice. Thus, the current study proved the association of BAG family proteins with PD, and suggested the involvement and a positive role of BAG2, BAG5 in the neuroprotection of rasagiline. These preliminary results implicate a novel pathway for further study on neuroprotection of rasagiline. PMID:26770414

  3. The microenvironment within and pollen transmission through paper and polyethylene sorghum pollination bags

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Bird damage is a problem in sorghum breeding and germplasm maintenance operations. Paper pollination bags are damaged by rain and provide minimal deterrent to birds. Earlier we reported upon bird resistance of spun polyethylene pollination bags. Herein, we report the potential for pollen transmissio...

  4. THE USE OF TEDLAR BAGS TO CONTAIN GASEOUS BENZENE SAMPLES AT SOURCE-LEVEL CONCENTRATIONS

    EPA Science Inventory

    Tedlar bags have been evaluated as containers for gaseous benzene samples for use in EPA Method 111 - Determination of Benzene from Stationary Sources. When such bags were used for storage, benzene samples remained essentially unchanged when held at ambient temperatures for up to...

  5. 75 FR 34699 - Polyethylene Retail Carrier Bags from Thailand: Rescission of Antidumping Duty Administrative...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-18

    ..., 74 FR 48224 (September 22, 2009). On April 19, 2010, the petitioners withdrew their request for an... International Trade Administration Polyethylene Retail Carrier Bags from Thailand: Rescission of Antidumping... order on polyethylene retail carrier bags from Thailand. The period of review is August 1, 2008,...

  6. 75 FR 36359 - Polyethylene Retail Carrier Bags From Thailand: Extension of Time Limit for Preliminary Results...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-25

    ... Thailand. See Antidumping Duty Order: Polyethylene Retail Carrier Bags From Thailand, 69 FR 48204 (August 9... of Sales at Less Than Fair Value: Polyethylene Retail Carrier Bags From Thailand, 69 FR 34122, 34123... Administrative Reviews and Request for Revocation in Part, 74 FR 48224, 48226 (September 22, 2009).\\1\\ The...

  7. 76 FR 26241 - Polyethylene Retail Carrier Bags From Thailand: Extension of Time Limit for Preliminary Results...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-06

    ..., 75 FR 60076 (September 29, 2010). The preliminary results of this administrative review are currently... International Trade Administration Polyethylene Retail Carrier Bags From Thailand: Extension of Time Limit for... polyethylene retail carrier bags from Thailand for the period August 1, 2009, through July 31, 2010....

  8. 77 FR 25684 - Polyethylene Retail Carrier Bags From Thailand: Rescission of Antidumping Duty Administrative Review

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-01

    ... Reviews and Requests for Revocations in Part, 76 FR 61076 (October 3, 2011). Based on a request for review... International Trade Administration Polyethylene Retail Carrier Bags From Thailand: Rescission of Antidumping... retail carrier bags from Thailand. The period of review is August 1, 2010, through July 31, 2011. As...

  9. Bird-resistant pollination bags for sorghum breeding and germplasm maintenance

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Bird damage is a problem in sorghum breeding and germplasm maintenance operations. Paper pollination bags are damaged by rain and provide minimal deterrent to birds. To overcome these limitations we fabricated pollination bags from spun polyethylene fiber sheeting. Seed loss by bird damage was elimi...

  10. BAG3 elevation inhibits cell proliferation via direct interaction with G6PD in hepatocellular carcinomas

    PubMed Central

    Kong, De-Hui; Li, Si; Du, Zhen-Xian; Liu, Chuan; Liu, Bao-Qin; Li, Chao; Zong, Zhi-Hong; Wang, Hua-Qin

    2016-01-01

    Bcl-2 associated athanogene 3 (BAG3) contains multiple protein-binding motifs to mediate potential interactions with chaperons and/or other proteins, which is possibly ascribed to the multifaceted functions assigned to BAG3. The current study demonstrated that BAG3 directly interacted with glucose 6 phosphate dehydrogenase (G6PD), the rate-limiting enzyme of the pentose phosphate pathway (PPP). BAG3 suppressed the PPP flux, de novo DNA synthesis and cell growth in hepatocellular carcinomas (HCCs). The growth defect of HCCs with forced BAG3 expression can be rescued by enforced G6PD expression. However, BAG3 elevation did not cause a reduction in cellular NADPH concentrations, another main product of G6PD. In addition, supplement of nucleosides alone was sufficient to recover the growth defect mediated by BAG3 elevation. Collectively, the current study established a tumor suppressor-like function of BAG3 via direct interaction with G6PD in HCCs at the cellular level. PMID:26621836

  11. 76 FR 70965 - Polyethylene Retail Carrier Bags From Thailand: Correction to the Amended Final Results of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-16

    ... Retail Carrier Bags From Thailand: Amended Final Results of Antidumping Duty Administrative Review, 76 FR... Bags From Thailand, 75 FR 48940 (August 12, 2010). These deposit requirements, when imposed, shall... August 1, 2009, through July 31, 2010. The notice did not include the names and margins of two...

  12. Home-School Literacy Bags for Twenty-First Century Preschoolers

    ERIC Educational Resources Information Center

    Brand, Susan Trostle; Marchand, Jessica; Lilly, Elizabeth; Child, Martha

    2014-01-01

    Combining home-school literacy bags with preschool family literature circles provided a strong foundation for family involvement at home and school during this year-long Reading Partners project, and helped parents become essential partners in their children's literacy development. Using home-school literacy bags, children and parents learned…

  13. Cordyceps sinensis attenuates renal fibrosis and suppresses BAG3 induction in obstructed rat kidney.

    PubMed

    Du, Feng; Li, Si; Wang, Tian; Zhang, Hai-Yan; Zong, Zhi-Hong; Du, Zhen-Xian; Li, De-Tian; Wang, Hua-Qin; Liu, Bo; Miao, Jia-Ning; Bian, Xiao-Hui

    2015-01-01

    BAG3 regulates a number of cellular processes, including cell proliferation, apoptosis, adhesion and migration, and epithelial-mesenchymal transition (EMT). However, the role of BAG3 in renal tubular EMT and renal interstitial fibrosis remains elusive. This study aimed to examine the dynamic expression of BAG3 during renal fibrosis, and to investigate the efficacy of Cordyceps sinensis (C. sinensis) on renal fibrosis. A rat model of unilateral ureteral obstruction (UUO) was established, and the expression of BAG3 and α-SMA, and the efficacy of C. sinensis on renal fibrosis induced by UUO were examined. The results showed that UUO led to collagen accumulation, which was significantly suppressed by C. sinensis. UUO increased the expression of BAG3 and α-SMA, a mesenchymal marker, while UUO induced BAG3 and α-SMA expression was significantly inhibited by C. sinensis. In addition, immunohistochemical staining demonstrated that BAG3 immunoreactivity was restricted to tubular epithelium. In conclusion, BAG3 is a potential target for the prevention and/or treatment of renal fibrosis, and C. Sinensis is a promising agent for renal fibrosis. PMID:26175854

  14. CaM/BAG5/Hsc70 signaling complex dynamically regulates leaf senescence

    PubMed Central

    Li, Luhua; Xing, Yangfei; Chang, Dong; Fang, Shasha; Cui, Boyang; Li, Qi; Wang, Xuejie; Guo, Shang; Yang, Xue; Men, Shuzhen; Shen, Yuequan

    2016-01-01

    Calcium signaling plays an essential role in plant cell physiology, and chaperone-mediated protein folding directly regulates plant programmed cell death. The Arabidopsis thaliana protein AtBAG5 (Bcl-2-associated athanogene 5) is unique in that it contains both a BAG domain capable of binding Hsc70 (Heat shock cognate protein 70) and a characteristic IQ motif that is specific for Ca2+-free CaM (Calmodulin) binding and hence acts as a hub linking calcium signaling and the chaperone system. Here, we determined crystal structures of AtBAG5 alone and in complex with Ca2+-free CaM. Structural and biochemical studies revealed that Ca2+-free CaM and Hsc70 bind AtBAG5 independently, whereas Ca2+-saturated CaM and Hsc70 bind AtBAG5 with negative cooperativity. Further in vivo studies confirmed that AtBAG5 localizes to mitochondria and that its overexpression leads to leaf senescence symptoms including decreased chlorophyll retention and massive ROS production in dark-induced plants. Mutants interfering the CaM/AtBAG5/Hsc70 complex formation leads to different phenotype of leaf senescence. Collectively, we propose that the CaM/AtBAG5/Hsc70 signaling complex plays an important role in regulating plant senescence. PMID:27539741

  15. 75 FR 38978 - Polyethylene Retail Carrier Bags From the People's Republic of China, Malaysia, and Thailand...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-07

    ... Polyethylene Retail Carrier Bags From China, Malaysia, and Thailand, 74 FR 31750 (July 2, 2009). \\1\\ On August... Duty Order: Polyethylene Retail Carrier Bags From Malaysia, 69 FR 48203 (August 9, 2004); Antidumping..., Malaysia, and Thailand: Continuation of Antidumping Duty Orders AGENCY: Import...

  16. Enhanced algorithm performance for land cover classification from remotely sensed data using bagging and boosting

    USGS Publications Warehouse

    Chan, J.C.-W.; Huang, C.; DeFries, R.

    2001-01-01

    Two ensemble methods, bagging and boosting, were investigated for improving algorithm performance. Our results confirmed the theoretical explanation [1] that bagging improves unstable, but not stable, learning algorithms. While boosting enhanced accuracy of a weak learner, its behavior is subject to the characteristics of each learning algorithm.

  17. Pediatric diseases and operational deployments.

    PubMed

    Pearn, J

    2000-04-01

    Many nations now export military health as a proactive arm of the nation's contribution to the maintenance of international peace in trouble regions of the world; and all nations are called upon from time to time in emergency and disaster situations to help out in their regions of interest. Children and young teenagers constitute some 50% of war-stricken populations. This paper explores this increasingly important role of military medicine from the point of view of a practicing pediatrician and career doctor-soldier. Many international operational deployments undertaken in the last 5 years have required the insertion of pediatric clinical and preventive health resources. Deployments to Rwanda, the countries of the former Yugoslavia, Somalia, Bougainville (in Papua New Guinea), Irian Jaya (in Indonesia), and the Aitape tsunami disaster response (the Sepik region of Papua New Guinea) have all necessitated major pediatric interventions. In some operational deployments, in excess of one-third of patient and clinical contacts have involved the care of children, including clinical treatments ranging from life-saving resuscitation to the care of children with both tropical and subtropical illnesses. They have also involved mass immunization campaigns (e.g., in Rwanda) to prevent measles and meningococcal septicemia. In developing countries, at any time approximately 1 to 4 teenage and adult women is pregnant; and of these, 1 in 15 is suffering a miscarriage during any 2-week period. The implications of this audit are that service members must be multi-skilled not only in the traditional aspects of military medicine and nursing but also in (a) the developmental aspects of childhood; (b) the prevention of infectious childhood diseases by immunization and other means; (c) the recognition and management of diseases of childhood; and (d) the management of the normal neonate and infant, especially those orphaned in refugee disaster and other emergency situations. Doctor

  18. Alteration of the stability of Bag-1 protein in the control of olfactory neuronal apoptosis.

    PubMed

    Sourisseau, T; Desbois, C; Debure, L; Bowtell, D D; Cato, A C; Schneikert, J; Moyse, E; Michel, D

    2001-04-01

    Normal apoptosis occurs continuously in the olfactory neuroepithelium of adult vertebrates, making it a useful model for studying neuronal apoptosis. Here we demonstrate that overexpression of the anti-apoptotic Bag-1 gene in olfactory neuronal cells confers a strong resistance to apoptosis. Conversely decreased levels of Bag-1 were found to precede a massive wave of olfactory neuronal apoptosis triggered by synaptic target ablation. We show that the decrease is brought about by ubiquitination and subsequent degradation of the Bag-1 protein. The ring finger protein Siah-2 is a likely candidate for the ubiquitination reaction since Siah-2 mRNA accumulated in lesioned olfactory neuroepithelium and overexpression of Siah-2 stimulated Bag-1 ubiquitination and degradation in transient expression assays. These results together identify destabilization of Bag-1 as a necessary step in olfactory neuronal apoptosis. PMID:11257006

  19. Stability of the lepton bag model based on the Kerr-Newman solution

    NASA Astrophysics Data System (ADS)

    Burinskii, A.

    2015-11-01

    We show that the lepton bag model considered in our previous paper [10], generating the external gravitational and electromagnetic fields of the Kerr-Newman (KN) solution, is supersymmetric and represents a BPS-saturated soliton interpolating between the internal vacuum state and the external KN solution. We obtain Bogomolnyi equations for this phase transition and show that the Bogomolnyi bound determines all important features of this bag model, including its stable shape. In particular, for the stationary KN solution, the BPS bound provides stability of the ellipsoidal form of the bag and the formation of the ring-string structure at its border, while for the periodic electromagnetic excitations of the KN solution, the BPS bound controls the deformation of the surface of the bag, reproducing the known flexibility of bag models.

  20. Stability of the lepton bag model based on the Kerr–Newman solution

    SciTech Connect

    Burinskii, A.

    2015-11-15

    We show that the lepton bag model considered in our previous paper [10], generating the external gravitational and electromagnetic fields of the Kerr–Newman (KN) solution, is supersymmetric and represents a BPS-saturated soliton interpolating between the internal vacuum state and the external KN solution. We obtain Bogomolnyi equations for this phase transition and show that the Bogomolnyi bound determines all important features of this bag model, including its stable shape. In particular, for the stationary KN solution, the BPS bound provides stability of the ellipsoidal form of the bag and the formation of the ring–string structure at its border, while for the periodic electromagnetic excitations of the KN solution, the BPS bound controls the deformation of the surface of the bag, reproducing the known flexibility of bag models.

  1. The existing situation and challenges regarding the use of plastic carrier bags in Europe.

    PubMed

    Kasidoni, Maria; Moustakas, Konstantinos; Malamis, Dimitris

    2015-05-01

    Since day one, retailers and consumers have favoured plastic carrier bags. However, owing to the numerous environmental disadvantages, lightweight plastic carrier bags have been drawing the attention of the European Union competent authorities. Therefore, many European Union member states have taken action so as to reduce the use of plastic carrier bags. Based on the existing legislation and voluntary initiatives for the reduction of lightweight plastic carrier bags, the challenges and achieved outcomes from the implemented policy options in the various European Union member states are discussed and commented regarding the forthcoming transposition of the 'Directive 94/62/EC on packaging and packaging waste to reduce the consumption of lightweight plastic carrier bags' into the European Union member states' national law. PMID:25827845

  2. Flow-Meter and Passive Diffusion Bag Tests and Potential Influences on the Vertical Distribution of Contaminants in Wells at Galena Airport, Galena, Alaska, August to October 2002

    USGS Publications Warehouse

    Vroblesky, Don A.; Peterson, J.E.

    2004-01-01

    Past activities at Galena Airport, a U.S. Air Force Base in Galena, Alaska, have resulted in ground-water contamination by volatile organic compounds. The primary contaminants are petroleum hydrocarbons and chlorinated aliphatic hydrocarbons. The U.S. Geological Survey and Earth Tech, in cooperation with the Air Force Center for Environmental Excellence, conducted investigations at Galena Airport from August to October 2002 using polyethylene diffusion bag samplers and borehole flow-meter testing to examine the vertical distribution of ground-water contamination in selected wells. This investigation was limited to the vicinity of building 1845 and to the area between building 1845 and the Yukon River. In addition, the U.S. Geological Survey was asked to determine whether additional wells are needed to more clearly define the nature and extent of the ground-water contamination at the Air Force Base. Little or no vertical water movement occurred under ambient conditions in the wells tested at Galena Airport, Alaska, in August 2002. All of the ambient vertical flows detected in wells were at rates less than the quantitative limit of the borehole flow meter (0.03 gallons per minute). In wells 06-MW-07 and 10-MW-01, no vertical flow was detected. In wells where ambient flow was detected, the direction of flow was downward. In general, concentrations of volatile organic compounds detected in the low-flow samples from wells at Galena Airport were approximately the same concentrations detected in the closest polyethylene diffusion bag sample for a wide variety of volatile organic compounds. The data indicate that the polyethylene diffusion bag sample results are consistent with the low-flow sample results. Vertical profiling of selected wells using polyethylene diffusion bag samplers at Galena Airport showed that from September 30 to October 1, 2002, little vertical change occurred in volatile organic compound concentrations along the screen length despite the fact that

  3. Microbial Contents of Vacuum Cleaner Bag Dust and Emitted Bioaerosols and Their Implications for Human Exposure Indoors

    PubMed Central

    Veillette, Marc; Knibbs, Luke D.; Pelletier, Ariane; Charlebois, Remi; Blais Lecours, Pascale; He, Congrong; Morawska, Lidia

    2013-01-01

    Vacuum cleaners can release large concentrations of particles, both in their exhaust air and from resuspension of settled dust. However, the size, variability, and microbial diversity of these emissions are unknown, despite evidence to suggest they may contribute to allergic responses and infection transmission indoors. This study aimed to evaluate bioaerosol emission from various vacuum cleaners. We sampled the air in an experimental flow tunnel where vacuum cleaners were run, and their airborne emissions were sampled with closed-face cassettes. Dust samples were also collected from the dust bag. Total bacteria, total archaea, Penicillium/Aspergillus, and total Clostridium cluster 1 were quantified with specific quantitative PCR protocols, and emission rates were calculated. Clostridium botulinum and antibiotic resistance genes were detected in each sample using endpoint PCR. Bacterial diversity was also analyzed using denaturing gradient gel electrophoresis (DGGE), image analysis, and band sequencing. We demonstrated that emission of bacteria and molds (Penicillium/Aspergillus) can reach values as high as 1E5 cell equivalents/min and that those emissions are not related to each other. The bag dust bacterial and mold content was also consistent across the vacuums we assessed, reaching up to 1E7 bacterial or mold cell equivalents/g. Antibiotic resistance genes were detected in several samples. No archaea or C. botulinum was detected in any air samples. Diversity analyses showed that most bacteria are from human sources, in keeping with other recent results. These results highlight the potential capability of vacuum cleaners to disseminate appreciable quantities of molds and human-associated bacteria indoors and their role as a source of exposure to bioaerosols. PMID:23934489

  4. Active Joint Mechanism Driven by Multiple Actuators Made of Flexible Bags: A Proposal of Dual Structural Actuator

    PubMed Central

    Inou, Norio

    2013-01-01

    An actuator is required to change its speed and force depending on the situation. Using multiple actuators for one driving axis is one of the possible solutions; however, there is an associated problem of output power matching. This study proposes a new active joint mechanism using multiple actuators. Because the actuator is made of a flexible bag, it does not interfere with other actuators when it is depressurized. The proposed joint achieved coordinated motion of multiple actuators. This report also discusses a new actuator which has dual cylindrical structure. The cylinders are composed of flexible bags with different diameters. The joint torque is estimated based on the following factors: empirical formula for the flexible actuator torque, geometric relationship between the joint and the actuator, and the principle of virtual work. The prototype joint mechanism achieves coordinated motion of multiple actuators for one axis. With this motion, small inner actuator contributes high speed motion, whereas large outer actuator generates high torque. The performance of the prototype joint is examined by speed and torque measurements. The joint showed about 30% efficiency at 2.0 Nm load torque under 0.15 MPa air input. PMID:24385868

  5. Active joint mechanism driven by multiple actuators made of flexible bags: a proposal of dual structural actuator.

    PubMed

    Kimura, Hitoshi; Matsuzaki, Takuya; Kataoka, Mokutaro; Inou, Norio

    2013-01-01

    An actuator is required to change its speed and force depending on the situation. Using multiple actuators for one driving axis is one of the possible solutions; however, there is an associated problem of output power matching. This study proposes a new active joint mechanism using multiple actuators. Because the actuator is made of a flexible bag, it does not interfere with other actuators when it is depressurized. The proposed joint achieved coordinated motion of multiple actuators. This report also discusses a new actuator which has dual cylindrical structure. The cylinders are composed of flexible bags with different diameters. The joint torque is estimated based on the following factors: empirical formula for the flexible actuator torque, geometric relationship between the joint and the actuator, and the principle of virtual work. The prototype joint mechanism achieves coordinated motion of multiple actuators for one axis. With this motion, small inner actuator contributes high speed motion, whereas large outer actuator generates high torque. The performance of the prototype joint is examined by speed and torque measurements. The joint showed about 30% efficiency at 2.0 Nm load torque under 0.15 MPa air input. PMID:24385868

  6. Method for deploying multiple spacecraft

    NASA Technical Reports Server (NTRS)

    Sharer, Peter J. (Inventor)

    2007-01-01

    A method for deploying multiple spacecraft is disclosed. The method can be used in a situation where a first celestial body is being orbited by a second celestial body. The spacecraft are loaded onto a single spaceship that contains the multiple spacecraft and the spacecraft is launched from the second celestial body towards a third celestial body. The spacecraft are separated from each other while in route to the third celestial body. Each of the spacecraft is then subjected to the gravitational field of the third celestial body and each of the spacecraft assumes a different, independent orbit about the first celestial body. In those situations where the spacecraft are launched from Earth, the Sun can act as the first celestial body, the Earth can act as the second celestial body and the Moon can act as the third celestial body.

  7. Promoting fertilizer use via controlled release of a bacteria-encapsulated film bag.

    PubMed

    Wu, Chin-San

    2010-05-26

    A phosphate-solubilizing bacterium ( Burkholderia cepacia isolate) encapsulated in maleic anhydride (MA) grafted onto poly(butylene succinate adipate) (PBSA) and then combined with starch as film bag material (PBSA-g-MA/starch) incubated in a saline solution required approximately 20 days to deplete the starch in the film bags. Thereafter, the cell concentration in the saline solution increased significantly because of the release of cells from the severely destroyed film bags and also their growth by use of depolymerized PBSA-g-MA fragments as a substrate. The incubation proceeded for 60 days, by which time the PBSA-g-MA/starch composite had suffered a >80% weight loss. For practical application, effectiveness of the above-mentioned film bags was demonstrated because it could improve the absorbability of a fertilizer for plants and promote the growth of plants. As a result, it can avoid the accumulation of the phosphate in excess fertilizer that lead to the phenomenon of poor soils. These results demonstrate that PBSA-g-MA/starch can be used to encapsulate cells of an indigenous phosphate-solubilizing bacterium ( B. cepacia isolate) to form a controlled release of bacteria-encapsulated film bag (BEFB). The B. cepacia isolate was able to degrade the film bags material, causing cell release. Biodegradability of the film bags depended upon the type of material used, because the PBSA film bags were also degraded but to a lesser degree. The addition of starch made the film bags more biodegradable. The decrease in intrinsic viscosity was also higher for the starch composite, suggesting a strong connection between the biodegradability and these characteristics. The results suggest that the release of fertilizer-promoted bacteria might be controllable via a suitable film bag material formulation. In addition, this work adopted live bacteria to promote the absorption of phosphate, which is superior to the phosphate used in the traditional way. PMID:20420423

  8. Effective face recognition using bag of features with additive kernels

    NASA Astrophysics Data System (ADS)

    Yang, Shicai; Bebis, George; Chu, Yongjie; Zhao, Lindu

    2016-01-01

    In past decades, many techniques have been used to improve face recognition performance. The most common and well-studied ways are to use the whole face image to build a subspace based on the reduction of dimensionality. Differing from methods above, we consider face recognition as an image classification problem. The face images of the same person are considered to fall into the same category. Each category and each face image could be both represented by a simple pyramid histogram. Spatial dense scale-invariant feature transform features and bag of features method are used to build categories and face representations. In an effort to make the method more efficient, a linear support vector machine solver, Pegasos, is used for the classification in the kernel space with additive kernels instead of nonlinear SVMs. Our experimental results demonstrate that the proposed method can achieve very high recognition accuracy on the ORL, YALE, and FERET databases.

  9. Rapid Deployment of Rich Catalytic Combustion

    SciTech Connect

    Richard S. Tuthill

    2004-06-10

    The overall objective of this research under the Turbines Program is the deployment of fuel flexible rich catalytic combustion technology into high-pressure ratio industrial gas turbines. The resulting combustion systems will provide fuel flexibility for gas turbines to burn coal derived synthesis gas or natural gas and achieve NO{sub x} emissions of 2 ppmvd or less (at 15 percent O{sub 2}), cost effectively. This advance will signify a major step towards environmentally friendly electric power generation and coal-based energy independence for the United States. Under Phase 1 of the Program, Pratt & Whitney (P&W) performed a system integration study of rich catalytic combustion in a small high-pressure ratio industrial gas turbine with a silo combustion system that is easily scalable to a larger multi-chamber gas turbine system. An implementation plan for this technology also was studied. The principal achievement of the Phase 1 effort was the sizing of the catalytic module in a manner which allowed a single reactor (rather than multiple reactors) to be used by the combustion system, a conclusion regarding the amount of air that should be allocated to the reaction zone to achieve low emissions, definition of a combustion staging strategy to achieve low emissions, and mechanical integration of a Ceramic Matrix Composite (CMC) combustor liner with the catalytic module.

  10. Categorizing dynamic textures using a bag of dynamical systems.

    PubMed

    Ravichandran, Avinash; Chaudhry, Rizwan; Vidal, René

    2013-02-01

    We consider the problem of categorizing video sequences of dynamic textures, i.e., nonrigid dynamical objects such as fire, water, steam, flags, etc. This problem is extremely challenging because the shape and appearance of a dynamic texture continuously change as a function of time. State-of-the-art dynamic texture categorization methods have been successful at classifying videos taken from the same viewpoint and scale by using a Linear Dynamical System (LDS) to model each video, and using distances or kernels in the space of LDSs to classify the videos. However, these methods perform poorly when the video sequences are taken under a different viewpoint or scale. In this paper, we propose a novel dynamic texture categorization framework that can handle such changes. We model each video sequence with a collection of LDSs, each one describing a small spatiotemporal patch extracted from the video. This Bag-of-Systems (BoS) representation is analogous to the Bag-of-Features (BoF) representation for object recognition, except that we use LDSs as feature descriptors. This choice poses several technical challenges in adopting the traditional BoF approach. Most notably, the space of LDSs is not euclidean; hence, novel methods for clustering LDSs and computing codewords of LDSs need to be developed. We propose a framework that makes use of nonlinear dimensionality reduction and clustering techniques combined with the Martin distance for LDSs to tackle these issues. Our experiments compare the proposed BoS approach to existing dynamic texture categorization methods and show that it can be used for recognizing dynamic textures in challenging scenarios which could not be handled by existing methods. PMID:23257470

  11. A One-Piece Lunar Regolith-Bag Garage Prototype

    NASA Technical Reports Server (NTRS)

    Smithers, Gweneth A.; Nehls, Mary K.; Hovater, Mary A.; Evans, Steven W.; Miller, J. Scott; Broughton, Roy M.; Beale, David; Killing-Balci, Fatma

    2007-01-01

    Shelter structures on the moon, even in early phases of exploration, should incorporate lunar materials as much as possible. We designed and constructed a prototype for a one-piece regolith-bag unpressurized garage concept, and, in parallel, we conducted a materials testing program to investigate six candidate fabrics to learn how they might perform in the lunar environment. In our concept, a lightweight fabric form is launched from Earth to be landed on the lunar surface and robotically filled with raw lunar regolith. In the materials testing program, regolith-bag fabric candidates included: Vectran(TM), Nextel(TM), Gore PTFE Fabric(TM), Zylon(TM), Twaron(TM), and Nomex(TM). Tensile (including post radiation exposure), fold, abrasion, and hypervelocity impact testing were performed under ambient conditions, and, within our current means, we also performed these tests under cold and elevated temperatures. In some cases, lunar simulant (JSC-1) was used in conjunction with testing. Our ambition is to continuously refine our testing to reach lunar environmental conditions to the extent possible. A series of preliminary structures were constructed during design of the final prototype. Design is based on the principles of the classic masonry arch. The prototype was constructed of Kevlar(TM) and filled with vermiculite (fairly close to the weight of lunar regolith on the moon). The structure is free-standing, but has not yet been load tested. Our plan for the future would be to construct higher fidelity mockups with each iteration, and to conduct appropriate tests of the structure.

  12. Ca2+-induced uncoupling of Aplysia bag cell neurons.

    PubMed

    Dargaei, Zahra; Standage, Dominic; Groten, Christopher J; Blohm, Gunnar; Magoski, Neil S

    2015-02-01

    Electrical transmission is a dynamically regulated form of communication and key to synchronizing neuronal activity. The bag cell neurons of Aplysia are a group of electrically coupled neuroendocrine cells that initiate ovulation by secreting egg-laying hormone during a prolonged period of synchronous firing called the afterdischarge. Accompanying the afterdischarge is an increase in intracellular Ca2+ and the activation of protein kinase C (PKC). We used whole cell recording from paired cultured bag cell neurons to demonstrate that electrical coupling is regulated by both Ca2+ and PKC. Elevating Ca2+ with a train of voltage steps, mimicking the onset of the afterdischarge, decreased junctional current for up to 30 min. Inhibition was most effective when Ca2+ entry occurred in both neurons. Depletion of Ca2+ from the mitochondria, but not the endoplasmic reticulum, also attenuated the electrical synapse. Buffering Ca2+ with high intracellular EGTA or inhibiting calmodulin kinase prevented uncoupling. Furthermore, activating PKC produced a small but clear decrease in junctional current, while triggering both Ca2+ influx and PKC inhibited the electrical synapse to a greater extent than Ca2+ alone. Finally, the amplitude and time course of the postsynaptic electrotonic response were attenuated after Ca2+ influx. A mathematical model of electrically connected neurons showed that excessive coupling reduced recruitment of the cells to fire, whereas less coupling led to spiking of essentially all neurons. Thus a decrease in electrical synapses could promote the afterdischarge by ensuring prompt recovery of electrotonic potentials or making the neurons more responsive to current spreading through the network. PMID:25411460

  13. A One-Piece Lunar Regolith-Bag Garage Prototype

    NASA Technical Reports Server (NTRS)

    Smithers, Gweneth A.; Nehls, Mary K.; Hovater, Mary A.; Evans, Steven W.; Miller, J. Scott; Broughton, Roy M., Jr.; Beale, David; Killinc-Balci, Fatma

    2006-01-01

    Shelter structures on the moon, even in early phases of exploration, should incorporate lunar materials as much as possible. We designed and constructed a prototype for a one-piece regolith-bag unpressurized garage concept, and, in parallel, we conducted a materials testing program to investigate six candidate fabrics to learn how they might perform in the lunar environment. In our concept, a lightweight fabric form is launched from Earth to be landed on the lunar surface and robotically filled with raw lunar regolith. In the materials testing program, regolith-bag fabric candidates included: VectranTM, NextelTM, Gore PTFE FabricTM, ZylonTM TwaronTM and NomexTM. Tensile (including post radiation exposure), fold, abrasion, and hypervelocity impact testing were performed under ambient conditions, and, within our current means, we also performed these tests under cold and elevated temperatures. In some cases, lunar simulant (JSC-1) was used in conjunction with testing. Our ambition is to continuously refine our testing to reach lunar environmental conditions to the extent possible. A series of preliminary structures were constructed during design of the final prototype. Design is based on the principles of the classic masonry arch. The prototype was constructed of KevlarTM and filled with vermiculite (fairly close to the weight of lunar regolith on the moon). The structure is free-standing, but has not yet been load tested. Our plan for the future would be to construct higher fidelty mockups with each iteration, and to conduct appropriate tests of the structure.

  14. FLUIDIC: Metal Air Recharged

    SciTech Connect

    Friesen, Cody

    2014-03-07

    Fluidic, with the help of ARPA-E funding, has developed and deployed the world's first proven high cycle life metal air battery. Metal air technology, often used in smaller scale devices like hearing aids, has the lowest cost per electron of any rechargeable battery storage in existence. Deploying these batteries for grid reliability is competitive with pumped hydro installations while having the advantages of a small footprint. Fluidic's battery technology allows utilities and other end users to store intermittent energy generated from solar and wind, as well as maintain reliable electrical delivery during power outages. The batteries are manufactured in the US and currently deployed to customers in emerging markets for cell tower reliability. As they continue to add customers, they've gained experience and real world data that will soon be leveraged for US grid reliability.

  15. FLUIDIC: Metal Air Recharged

    ScienceCinema

    Friesen, Cody

    2014-04-02

    Fluidic, with the help of ARPA-E funding, has developed and deployed the world's first proven high cycle life metal air battery. Metal air technology, often used in smaller scale devices like hearing aids, has the lowest cost per electron of any rechargeable battery storage in existence. Deploying these batteries for grid reliability is competitive with pumped hydro installations while having the advantages of a small footprint. Fluidic's battery technology allows utilities and other end users to store intermittent energy generated from solar and wind, as well as maintain reliable electrical delivery during power outages. The batteries are manufactured in the US and currently deployed to customers in emerging markets for cell tower reliability. As they continue to add customers, they've gained experience and real world data that will soon be leveraged for US grid reliability.

  16. 75 FR 75454 - Polyethylene Retail Carrier Bags From Thailand: Extension of Time Limit for the Final Results of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-03

    ... polyethylene retail carrier bags from Thailand. See Polyethylene Retail Carrier Bags From Thailand: Preliminary Results of Antidumping Duty Administrative Review, 75 FR 53953 (September 2, 2010). The administrative... International Trade Administration Polyethylene Retail Carrier Bags From Thailand: Extension of Time Limit...

  17. The sand bag model of the dispersion of the cosmic body in the atmosphere

    NASA Astrophysics Data System (ADS)

    Teterev, A. V.; Nemchinov, I. V.

    1993-03-01

    The strength of the extraterrestrial bodies depends on their structure, composition, dimensions, and the history of this body. The fragmentation of the body due to aerodynamic stresses begins at sufficiently large heights above the surface of the Earth. The process of fragmentation and dispersion of the fragments usually is studied by the hydrodynamic or even gasdynamic models. If the fragmentation process begins due to the initial cracks and faults of the body, or this body consists of large boulders glued by ice, the strength of these boulders after fragmentation remains higher than the aerodynamic stresses exerted at the remaining part of the body. It is supposed that fragmentation occurs at initial moment t = 0 at some height zo above the surface of the air, these fragments remain solid. The possibility of further fragmentation during the remaining part of the trajectory is not taken into account. If the number of these parts is large enough and their size is small in comparison to the initial radius of the body than we can use the sand bag model proposed in qualitative form.

  18. The sand bag model of the dispersion of the cosmic body in the atmosphere

    NASA Technical Reports Server (NTRS)

    Teterev, A. V.; Nemchinov, I. V.

    1993-01-01

    The strength of the extraterrestrial bodies depends on their structure, composition, dimensions, and the history of this body. The fragmentation of the body due to aerodynamic stresses begins at sufficiently large heights above the surface of the Earth. The process of fragmentation and dispersion of the fragments usually is studied by the hydrodynamic or even gasdynamic models. If the fragmentation process begins due to the initial cracks and faults of the body, or this body consists of large boulders glued by ice, the strength of these boulders after fragmentation remains higher than the aerodynamic stresses exerted at the remaining part of the body. It is supposed that fragmentation occurs at initial moment t = 0 at some height z(sub o) above the surface of the air, these fragments remain solid. The possibility of further fragmentation during the remaining part of the trajectory is not taken into account. If the number of these parts is large enough and their size is small in comparison to the initial radius of the body than we can use the sand bag model proposed in qualitative form.

  19. The BAG-1 isoform BAG-1M regulates keratin-associated Hsp70 chaperoning of aPKC in intestinal cells during activation of inflammatory signaling

    PubMed Central

    Mashukova, Anastasia; Kozhekbaeva, Zhanna; Forteza, Radia; Dulam, Vipin; Figueroa, Yolanda; Warren, Robert; Salas, Pedro J.

    2014-01-01

    ABSTRACT Atypical PKC (ι/λ and ζ; hereafter referred to as aPKC) is a key player in the acquisition of epithelial polarity and participates in other signaling cascades including the control of NF-κB signaling. This kinase is post-translationally regulated through Hsp70-mediated refolding. Previous work has shown that such a chaperoning activity is specifically localized to keratin intermediate filaments. Our work was performed with the goal of identifying the molecule(s) that block Hsp70 activity on keratin filaments during inflammation. A transcriptional screen allowed us to focus on BAG-1, a multi-functional protein that assists Hsp70 in nucleotide exchange but also blocks its activity at higher concentrations. We found the BAG-1 isoform BAG-1M upregulated threefold in human Caco-2 cells following stimulation with tumor necrosis factor receptor α (TNFα) to induce a pro-inflammatory response, and up to sixfold in mouse enterocytes following treatment with dextran sodium sulfate (DSS) to induce colitis. BAG-1M, but no other isoform, was found to co-purify with intermediate filaments and block Hsp70 activity in the keratin fraction but not in the soluble fraction within the range of concentrations found in epithelial cells cultured under control and inflammation conditions. Constitutive expression of BAG-1M decreased levels of phosphorylated aPKC. By contrast, knockdown of BAG-1, blocked the TNFα-induced decrease of phosphorylated aPKC. We conclude that BAG-1M mediates Hsp70 inhibition downstream of NF-κB. PMID:24876225

  20. DEVELOPMENT AND DEPLOYMENT OF ADVANCED EMISSION CONTROLS FOR THE RETROFIT MARKET

    SciTech Connect

    Edgar, B; Rumminger, M; Streichsbier, M

    2003-08-24

    Bringing a diesel retrofit product to market involves two primary phases: development and deployment. Critical product development steps include technology selection, system integration, laboratory and durability testing, and regulatory agency verification work. This initial product development phase is then followed by a deployment phase, which consists of building and managing the infrastructure for installation, distribution, service, sales and warranty support. Building relationships with regulators and air quality program developers is also a critical aspect of the deployment process. A successful path to market requires close cooperation between developer, distributor, customer and regulator.