Science.gov

Sample records for air cleaner means

  1. Cleaner Air in California May Mean Healthier Kids

    MedlinePlus

    ... all, Berhane said, the study suggests that curbing air pollution may benefit kids' respiratory health. "To parents, that ... and 2003-2012. Over that 20-year period, air pollution levels fell substantially, the study found. "Fine particle" ...

  2. You Can Help Keep the Air Cleaner -- Every Day

    MedlinePlus

    ... Can Help Keep the Air Cleaner -- Every Day! Air pollution can affect your health and the environment. There ... every one of us can take to reduce air pollution and keep the air cleaner, and precautionary measures ...

  3. 21 CFR 880.5045 - Medical recirculating air cleaner.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Medical recirculating air cleaner. 880.5045... Therapeutic Devices § 880.5045 Medical recirculating air cleaner. (a) Identification. A medical recirculating air cleaner is a device used to remove particles from the air for medical purposes. The device...

  4. 21 CFR 880.5045 - Medical recirculating air cleaner.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Medical recirculating air cleaner. 880.5045... Therapeutic Devices § 880.5045 Medical recirculating air cleaner. (a) Identification. A medical recirculating air cleaner is a device used to remove particles from the air for medical purposes. The device...

  5. 21 CFR 880.5045 - Medical recirculating air cleaner.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Medical recirculating air cleaner. 880.5045... Therapeutic Devices § 880.5045 Medical recirculating air cleaner. (a) Identification. A medical recirculating air cleaner is a device used to remove particles from the air for medical purposes. The device...

  6. Transport solutions for cleaner air.

    PubMed

    Kelly, Frank J; Zhu, Tong

    2016-05-20

    In cities across the globe, road transport remains an important source of air pollutants that are linked with acute and chronic health effects. Decreasing vehicle emissions--while maintaining or increasing commuter journeys--remains a major challenge for city administrators. In London, congestion-charging and a citywide low-emission zone failed to bring nitrogen dioxide concentrations under control. In Beijing, controls on the purchase and use of cars have not decreased transport emissions to a sufficient extent. As cities continue to grow, not even zero-emission vehicles are the solution. Moving increasingly large numbers of people efficiently around a city can only be achieved by expanding mass transit systems. PMID:27199415

  7. PARTICLE-SIZE DEPENDENT EFFICIENCY OF AIR CLEANERS

    EPA Science Inventory

    The paper gives results of tests with media filters, electrostatic filters, and electronic air cleaners. t also discusses results from system qualification tests to detect system artifacts. he collection efficiency of air cleaners as a function of particle diameter must be known ...

  8. 21 CFR 880.5045 - Medical recirculating air cleaner.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Medical recirculating air cleaner. 880.5045... (CONTINUED) MEDICAL DEVICES GENERAL HOSPITAL AND PERSONAL USE DEVICES General Hospital and Personal Use Therapeutic Devices § 880.5045 Medical recirculating air cleaner. (a) Identification. A medical...

  9. 21 CFR 880.5045 - Medical recirculating air cleaner.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Medical recirculating air cleaner. 880.5045... (CONTINUED) MEDICAL DEVICES GENERAL HOSPITAL AND PERSONAL USE DEVICES General Hospital and Personal Use Therapeutic Devices § 880.5045 Medical recirculating air cleaner. (a) Identification. A medical...

  10. Primary and secondary consequences of indoor air cleaners.

    PubMed

    Siegel, J A

    2016-02-01

    Air cleaning is broadly applied to reduce contaminant concentrations in many buildings. Although diverse in underlying technology, mode of application, target contaminants, and effectiveness, there are also commonalities in the framework for understanding their primary impact (i.e. concentration reductions) and secondary impacts (e.g. energy use and by-product production). Furthermore, both primary and secondary impacts are moderated by the specific indoor context in which an air cleaner is used. This investigation explores the dynamics of removal efficiency in a variety of air cleaners and combines efficiency and flow rate to put air cleaning in the context of real indoor environments. This allows for the direct comparison to other indoor pollutant loss mechanisms (ventilation and deposition) and further suggests that effective air cleaner use is context and contaminant specific. The concentration reduction impacts of air cleaning need to be contrasted with the secondary consequences that arise from the use of air cleaners. This study emphasizes two important secondary consequences: energy use of the air cleaning process and primary and secondary emissions from air cleaners. This study also identifies current research challenges and areas for large leaps in our understanding of the role of air cleaners in improving indoor environmental quality. PMID:25689321

  11. On-site application of air cleaner emitting plasma ion to reduce airborne contaminants in pig building

    NASA Astrophysics Data System (ADS)

    Cho, Man Su; Ko, Han Jong; Kim, Daekeun; Kim, Ki Youn

    2012-12-01

    The objective of this field study is to evaluate temporal reduction efficiency of air cleaner emitting plasma ion on airborne pollutants emitted from pig building. The operation principle of air cleaner based on plasma ion is that hydrogen atoms and oxygen ions combine to form hydroperoxyl radicals (HOO-), which surround and attach to surface of airborne microorganisms and eliminate them by breaking the hydrogen bond in their protein structure. In gaseous pollutants, it was found that there is no reduction effect of the air cleaner on ammonia and hydrogen sulfide (p > 0.05). In particulate pollutants, the air cleaner showed mean 79%(±6.1) and 78%(±3.0) of reduction efficiency for PM2.5. and PM1, respectively, compared to the control without air cleaner (p < 0.05). However, there is no significant difference in TSP and PM10 between the treatment with air cleaner and the control without air cleaner (p > 0.05). In biological pollutants, the mean reduction efficiencies for airborne bacteria and fungi by application of air cleaner were 22%(±6.6) and 25%(±8.7), respectively (p < 0.05). Based on the results obtained from this study, it was concluded that the air cleaner had a positive reduction effect on PM2.5, PM1, airborne bacteria and airborne fungi among airborne pollutants distributed in pig building while it did not lead to significant reduction of ammonia and hydrogen sulfide.

  12. RESIDENTIAL AIR CLEANERS: A SUMMARY OF AVAILABLE INFORMATION

    EPA Science Inventory

    This publication will provide up-to-date information on the types of air cleaners available to the consumer, provides available information on their general effectiveness in removing indoor air pollutants, discusses some factors to consider in deciding whether to use an air-clean...

  13. Control of asthma triggers in indoor air with air cleaners: a modeling analysis

    PubMed Central

    Myatt, Theodore A; Minegishi, Taeko; Allen, Joseph G; MacIntosh, David L

    2008-01-01

    Background Reducing exposure to environmental agents indoors shown to increase asthma symptoms or lead to asthma exacerbations is an important component of a strategy to manage asthma for individuals. Numerous investigations have demonstrated that portable air cleaning devices can reduce concentrations of asthma triggers in indoor air; however, their benefits for breathing problems have not always been reproducible. The potential exposure benefits of whole house high efficiency in-duct air cleaners for sensitive subpopulations have yet to be evaluated. Methods We used an indoor air quality modeling system (CONTAM) developed by NIST to examine peak and time-integrated concentrations of common asthma triggers present in indoor air over a year as a function of natural ventilation, portable air cleaners, and forced air ventilation equipped with conventional and high efficiency filtration systems. Emission rates for asthma triggers were based on experimental studies published in the scientific literature. Results Forced air systems with high efficiency filtration were found to provide the best control of asthma triggers: 30–55% lower cat allergen levels, 90–99% lower risk of respiratory infection through the inhalation route of exposure, 90–98% lower environmental tobacco smoke (ETS) levels, and 50–75% lower fungal spore levels than the other ventilation/filtration systems considered. These results indicate that the use of high efficiency in-duct air cleaners provide an effective means of controlling allergen levels not only in a single room, like a portable air cleaner, but the whole house. Conclusion These findings are useful for evaluating potential benefits of high efficiency in-duct filtration systems for controlling exposure to asthma triggers indoors and for the design of trials of environmental interventions intended to evaluate their utility in practice. PMID:18684328

  14. AIR CLEANER RESEARCH (INDOOR ENVIRONMENT MANAGEMENT BRANCH, AIR POLLUTION PREVENTION AND CONTROL DIVISION, NRMRL)

    EPA Science Inventory

    Using air cleaners to remove pollutants from indoor air is part an integrated indoor air quality strategy. Air cleaners can be used either alone or in combination with other control options when source control and improvements in ventilation are insufficient, impractical, or oth...

  15. Mist control at a machining center, Part 2: Mist control following installation of air cleaners.

    PubMed

    Yacher, J M; Heitbrink, W A; Burroughs, G E

    2000-01-01

    At a machining center used to produce transaxle and transmission parts, aerosol instrumentation was used to quantitatively evaluate size-dependent mist generation of a synthetic metalworking fluid (MWF) consisting primarily of water and triethanolamine (TEA). This information was used to select an air cleaner for controlling the mist. During most machining operations, the MWF was flooded over the part. These machining operations were performed in a nearly complete enclosure that was exhausted to an air cleaner consisting of three sections: a fall-out chamber, a trifilter section to capture metal chips and mist, and a 1.13 m3/sec (2400 ft3/min) blower. The partnering company requested that National Institute for Occupational Safety and Health (NIOSH) researchers perform an evaluation of the effectiveness of a commercially available air cleaner. After NIOSH researchers characterized mist generation at the machining centers and found that performance of a test air cleaner appeared to be suitable, the company installed more than 25 air cleaners on different machining centers in this plant and enclosed the corresponding fluid filtration unit. The facility also has implemented a maintenance program for the air cleaners that involves regularly scheduled filter changes; performance is ensured by monitoring static pressure. A NIOSH-conducted air sampling evaluation showed that area TEA concentrations were reduced from a geometric mean of 0.25 to 0.03 mg/m3. Personal total particulate concentrations were reduced from a geometric mean of 0.22 to 0.06 mg/m3. These results show the effectiveness of this combination of enclosure, ventilation, and filtration to greatly reduce the exposure to MWF mist generated in modern machining centers. PMID:10782201

  16. Integrated Technology Air Cleaners (ITAC): Design and Evaluation

    SciTech Connect

    Fisk, William J.; Cohn, Sebastian; Destaillats, Hugo; Henzel, Victor; Sidheswaran, Meera; Sullivan, Douglas P.

    2013-09-13

    The primary objective of this project was to design, build, and test an air cleaner for residential use with the potential to substantially improve indoor air quality, or maintain indoor air quality unchanged, when outdoor air ventilation rates are reduced to save energy. Two air cleaners were designed and fabricated. The design targets for airflow rate, fan power, and projected cost were met. In short term laboratory studies, both units performed as expected; however, during field studies in homes, the formaldehyde removal performance of the air cleaners was much lower than expected. In subsequent laboratory studies, incomplete decomposition of some indoor air volatile organic compounds, with formaldehyde as a product of partial decomposition of volatile organic compounds, was confirmed as the explanation for the poor formaldehyde removal performance in the field studies. The amount of formaldehyde produced per unit of decomposition of other volatile organic compounds was substantially diminished by increasing the amount of catalyst on the filter and also by decreasing the air velocity. Together, these two measures reduced formaldehyde production, per unit destruction of other volatile organic compounds, by a factor of four, while increasing the removal efficiency of volatile organic compounds by a factor of 1.4. A company with a southern California office is conducting studies in conjunction with Lawrence Berkeley National Laboratory, with the goal of incorporating the ITAC catalytic air cleaning technology in their future commercial products.

  17. Guide to Air Cleaners in the Home

    MedlinePlus

    ... Air Duct Cleaning Asthma Health, Energy Efficiency and Climate Change Flood Cleanup Home Remodel Indoor airPLUS Mold Radon ... menu Learn the Issues Air Chemicals and Toxics Climate Change Emergencies Greener Living Health and Safety Land and ...

  18. Thoron ( 220Rn) progeny reduction by an air cleaner of the polarized media filter type

    NASA Astrophysics Data System (ADS)

    Bigu, J.

    1993-02-01

    The effect of an air cleaner on 220Rn progeny atmospheres has been studied in a Radon/Thoron Test Facility (RTTF) of the walk-in type. The air cleaner consists basically of a fan and a special filter material sandwiched between two metal screens, to which an electric field is applied. The filter is of the polarized media type and uses fibreglass as material. The fan and filter system are housed in a metal case. Air is drawn from the back of the case by means of the fan and forced through the "electrical" filter where removal of the 220Rn progeny occurs. Radon-220 progeny "depleted" air is discharged at the top of the device. Tests were conducted in 220Rn/ 220Rn progeny atmospheres when the air cleaner was operating, and when it was turned off. Very pronounced effects were observed during the operation of the device, namely: a dramatic decrease in the 220Rn progeny concentrations and the total aerosol concentration, as well as a large increase in the 220Rn progeny unattached fractions and the plate-out of these radionuclides on the walls of the RTTF. The air cleaner has potential in industrial applications, which should be explored.

  19. Cleaner Air for Home and Office

    NASA Technical Reports Server (NTRS)

    1989-01-01

    Increased insulation has led to higher concentrations in homes and offices of toxic chemicals caused by emissions from synthetic building components. Recent NASA research regarding future interplanetary manned spacecraft has shown that certain plants can absorb gasses, reducing indoor air pollution. After working with water purifying water hyacinths, Dr. B. C. Wolverton at NSTL developed a carbon/plant filter system to remove chemicals, smoke, etc. Two companies have commercialized the system. Bio-safe provides plants, a bed of activated carbon and an air pump installed near the plant's roots. Pollutants are trapped by the charcoal and either digested by the roots or broken down by microorganisms. Purified air is then directed back into the room. Applied Indoor Resource Company markets Bio-Pure, which includes plants on a layer of patented soil medium with activated carbon. Legumes and mosses filter the air; a blower moves air through the filtering system for cleansing by microorganisms. Research at NSTL continues, and the system may eventually be enlarged.

  20. Ultrafine particle removal and generation by portable air cleaners

    NASA Astrophysics Data System (ADS)

    Waring, Michael S.; Siegel, Jeffrey A.; Corsi, Richard L.

    Portable air cleaners can both remove and generate pollutants indoors. To investigate these phenomena, we conducted a two-phase investigation in a 14.75 m 3 stainless steel chamber. In the first phase, particle size-resolved (12.6-514 nm diameter) clean air delivery rates (CADR) and efficiencies were determined, as were ozone emission rates, for two high-efficiency particle arresting (HEPA) filters, one electrostatic precipitator with a fan, and two ion generators without fans. The two HEPA air cleaners had count average CADR (standard deviation) of 188 (30) and 324 (44) m 3 h -1; the electrostatic precipitator 284 (62) m 3 h -1; and the two ion generators 41 (11) and 35 (13) m 3 h -1. The electrostatic precipitator emitted ozone at a rate of 3.8±0.2 mg h -1, and the two ion generators 3.3±0.2 and 4.3±0.2 mg h -1. Ozone initiates reactions with certain unsaturated organic compounds that produce ultrafine and fine particles, carbonyls, other oxidized products, and free radicals. During the second phase, five different ion generators were operated separately in the presence of a plug-in liquid or solid air freshener, representing a strong terpene source. For air exchange rates of between 0.49 and 0.96 h -1, three ion generators acted as steady-state net particle generators in the entire measured range of 4.61-157 nm, and two generated particles in the range of approximately 10 to 39-55 nm. Terpene and aldehyde concentrations were also sampled for one ion generator, and concentrations of terpenes decreased and formaldehyde increased. Given these results, the pollutant removal benefits of ozone-generating air cleaners may be outweighed by the generation of indoor pollution.

  1. MTBE: The headache of cleaner air

    SciTech Connect

    Kneiss, J.

    1995-07-01

    Gasoline with methyl tertiary butyl ether (MTBE) has been sold in the United States since 1979, when it was added to fuels as an octane enhancer after lead was phased out of motor fuels. Recently it has been introduced as a means of reducing carbon monoxide emissions during the winter months in targeted US cities. However, there is concern over health complaints including headaches, dizziness and nausea from residents of some areas. These reports have launched an era of assidious research by scientists and public health officials across the country to learn more about MTBE`s short-term and long-term, and possibly carcinogenic, health effects. New research should help weigh the risk of MTBE as a possible carcinogen and the effectiveness of MTBE-blended fuels in reducing carbon monoxide levels. The question is whether, in minimizing one risk, is another risk - however small - being introduced?

  2. Environmental Technology Verification: Supplement to Test/QA Plan for Biological and Aerosol Testing of General Ventilation Air Cleaners; Bioaerosol Inactivation Efficiency by HVAC In-Duct Ultraviolet Light Air Cleaners

    EPA Science Inventory

    The Air Pollution Control Technology Verification Center has selected general ventilation air cleaners as a technology area. The Generic Verification Protocol for Biological and Aerosol Testing of General Ventilation Air Cleaners is on the Environmental Technology Verification we...

  3. POLLUTION PREVENTION FOR CLEANER AIR: EPA'S AIR AND ENERGY ENGINEERING RESEARCH LABORATORY

    EPA Science Inventory

    The article discusses the role of EPA's Air and Energy Engineering Research Laboratory (AEERL) in pollution prevention research for cleaner air. For more than 20 years, AEERL has been conducting research to identify control approaches for the pollutants and sources which contribu...

  4. Removing seed coat fragments with a lint cleaner grid bar air knife

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Seed coat fragments (SCF) in ginned lint cause spinning problems at the textile mill and undesirable defects in finished goods. Work continued on developing an air knife that may help remove SCF from ginned lint. The air knife is mounted on the 1st lint cleaner grid bar of a saw-type lint cleaner,...

  5. AIR CLEANERS FOR INDOOR AIR POLLUTION CONTROL (CHAPTER 10)

    EPA Science Inventory

    The chapter describes an experimental study to evaluate performance characteristics of currently available controls for indoor air pollutants, including both particles and gases. he study evaluated the particle-size-dependent collection efficiency of seven commercially available ...

  6. Control of Respirable Particles in Indoor Air with Portable AirCleaners

    SciTech Connect

    Offermann, F.J.; Sextro, R.G.; Fisk, W.J.; Grimsrud, D.T.; Nazaroff, W.W.; Nero, A.V.; Revzan, K.L.; Yater, J.

    1984-10-01

    Eleven portable air cleaning devices have been evaluated for control of indoor concentrations of respirable particles using in situ chamber decay tests. Following injection of cigarette smoke in a room-size chamber, decay rates for particle concentrations were obtained for total number concentration and for number concentration by particle size with and without air cleaner operation. The size distribution of the tobacco smoke particles was log normal with a count median diameter of 0.15 {micro}m and a geometric standard deviation of 2.0. Without air cleaner operation, the natural mass-averaged surface deposition rate of particles was observed to be 0.1 h{sup -1}. Air cleaning rates for particles were found to be negligible for several small panel-filter devices, a residential-sized ion-generator, and a pair of mixing fans. Electrostatic precipitators and extended surface filters removed particles at substantial rates, and a HEPA-type filter was the most efficient air cleaner studied.

  7. IMPACT OF AN OZONE GENERATOR AIR CLEANER ON STYRENE CONCENTRATIONS IN AN INDOOR AIR QUALITY RESEARCH CHAMBER

    EPA Science Inventory

    The paper gives results of an investigation of the impact of an ozone generator air cleaner on vapor-phase styrene concentrations in a full-scale indoor air quality test chamber. The time history of the concentrations of styrene and ozone is well predicted by a simulation model u...

  8. FRACTIONAL AEROSOL FILTRATION EFFICIENCY OF IN-DUCT VENTILATION AIR CLEANERS

    EPA Science Inventory

    The filtration efficiency of ventilation air cleaners is highly particle-size dependent over the 0.01 to 3 μm diameter size range. Current standardized test methods, which determine only overall efficiencies for ambient aerosol or other test aerosols, provide data of limited util...

  9. Service the Carburetor Air Cleaner. Fuel System. Student Manual 1. Small Engine Repair Series. First Edition.

    ERIC Educational Resources Information Center

    Hill, Pamela

    This student manual, part of a small-engine repair series on servicing fuel systems, is designed for use by special needs students in Texas. The manual explains in pictures and short sentences, written on a low reading level, the job of servicing carburetor air cleaners. Along with the steps of this repair job, specific safety and caution…

  10. Evaluation of ozone generation and indoor organic compounds removal by air cleaners based on chamber tests

    NASA Astrophysics Data System (ADS)

    Yu, Kuo-Pin; Lee, Grace Whei-May; Hsieh, Ching-Pei; Lin, Chi-Chi

    2011-01-01

    Ozone can cause many health problems, including exacerbation of asthma, throat irritation, cough, chest ache, shortness of breath, and respiratory infections. Air cleaners are one of the sources of indoor ozone, and thus the evaluation of ozone generated by air cleaners is desired significant issue. Most evaluation methods proposed are based on chamber tests. However, the adsorption and desorption of ozone on the wall of test chamber and the deposition of ozone resulted from the surface reaction can influence the evaluation results. In this study, we developed a mass balance model that took the adsorption, desorption and deposition of ozone into consideration to evaluate the effective ozone emission rates of six selected air cleaners. The experiments were conducted in a stainless steel chamber with a volume of 11.3 m 3 at 25 °C and 60% relative humidity. The adsorption, desorption and deposition rate constants of ozone obtained by fitting the model to the experimental data were k a = 0.149 ± 0.052 m h -1, k d = 0.013 ± 0.007 h -1, and k r = 0.050 ± 0.020 h -1, respectively. The effective ozone emission rates of Air Cleaners No. 1, 2, and 3 ranged between 13,400-24,500 μg h -1, 7190-10,400 μg h -1, and 4880-6560 μg h -1, respectively, which were more stable than those of No.4, 5, and 6. The effective ozone emission rates of Air Cleaners No. 4, 5, and 6 increased with the time of operation which might be relevant to the decrease of ozone removal by the "aging" filter installed in these cleaners. The removal of toluene and formaldehyde by these six air cleaners were also evaluated and the clean air delivery rates (CADRs) of these two pollutants ranged from non-detectable to 0.42 ± 0.08 m 3 h -1, and from non-detectable to 0.75 ± 0.07 m 3 h -1, respectively. The CADRs showed an insignificant relationship with the effective ozone emission rates. Thus, the removal of toluene and formaldehyde might be resulted from the adsorption on the filters and the

  11. Control of respirable particles and radon progeny with portable air cleaners

    SciTech Connect

    Offermann, F.J.; Sextro, R.G.; Fisk, W.J.; Nazaroff, W.W.; Nero, A.V.; Revzan, K.L.; Yater, J.

    1984-02-01

    Eleven portable air cleaning devices have been evaluated for control of indoor concentrations of respirable particles and radon progeny. Following injection of cigarette smoke and radon in a room-size chamber, decay rates for particles and radon progeny concentrations were measured with and without air cleaner operation. Particle concentrations were obtained for total number concentration and for number concentration by particle size. In tests with no air cleaner the natural decay rate for cigarette smoke was observed to be 0.2 hr/sup -1/. Air cleaning rates for particles were found to be negligible for several small panel-filters, a residential ion-generator, and a pair of mixing fans. The electrostatic precipitators and extended surface filters tested had significant particle removal rates, and a HEPA-type filter was the most efficient air cleaner. The evaluation of radon progeny control produced similar results; the air cleaners which were effective in removing particles were also effective in removing radon progeny. At low particle concentrations plateout of the unattached radon progeny is an important removal mechanism. Based on data from these tests, the plateout rate for unattached progeny was found to be 15 hr/sup -1/. The unattached fraction and the overall removal rate due to deposition of attached and unattached nuclides have been estimated for each radon decay product as a function of particle concentration. While air cleaning can be effective in reducing total radon progeny, concentrations of unattached radon progeny can increase with increasing air cleaning. 39 references, 26 figures, 9 tables.

  12. New Technology Sparks Smoother Engines and Cleaner Air

    NASA Technical Reports Server (NTRS)

    2001-01-01

    Automotive Resources, Inc. (ARI) has developed a new device for igniting fuel in engines-the SmartPlug.TM SmartPlug is a self-contained ignition system that may be retrofitted to existing spark-ignition and compression-ignition engines. The SmartPlug needs as little as six watts of power for warm-up, and requires no electricity at all when the engine is running. Unlike traditional spark plugs, once the SmartPlug ignites the engine, and the engine heats up, the power supply for the plug is no longer necessary. In the utility industry, SmartPlugs can be used in tractors, portable generators, compressors, and pumps. In addition to general-purpose applications, such as lawn mowers and chainsaws, SmartPlugs can also be used in the recreational, marine, aviation, and automotive industries. Unlike traditional ignition systems, the SmartPlug system requires no distributor, coil points, or moving parts. SmartPlugs are non-fouling, with a faster and cleaner burn than traditional spark plugs. They prevent detonation and are not sensitive to moisture, allowing them to be used on a variety of engines. Other advantages include no electrical noise, no high voltage, exceptionally high altitude capabilities, and better cold-start statistics than those of standard spark ignition systems. Future applications for the SmartPlug are being evaluated by manufacturers in the snowmobile industry.

  13. Evaluation of a Combined Ultraviolet Photocatalytic Oxidation(UVPCO)/Chemisorbent Air Cleaner for Indoor Air Applications

    SciTech Connect

    Hodgson, Alfred T.; Destaillats, Hugo; Hotchi, Toshifumi; Fisk,William J.

    2007-02-01

    We previously reported that gas-phase byproducts of incomplete oxidation were generated when a prototype ultraviolet photocatalytic oxidation (UVPCO) air cleaner was operated in the laboratory with indoor-relevant mixtures of VOCs at realistic concentrations. Under these conditions, there was net production of formaldehyde and acetaldehyde, two important indoor air toxicants. Here, we further explore the issue of byproduct generation. Using the same UVPCO air cleaner, we conducted experiments to identify common VOCs that lead to the production of formaldehyde and acetaldehyde and to quantify their production rates. We sought to reduce the production of formaldehyde and acetaldehyde to acceptable levels by employing different chemisorbent scrubbers downstream of the UVPCO device. Additionally, we made preliminary measurements to estimate the capacity and expected lifetime of the chemisorbent media. For most experiments, the system was operated at 680-780 m{sup 3}/h (400-460 cfm). A set of experiments was conducted with common VOCs introduced into the UVPCO device individually and in mixture. Compound conversion efficiencies and the production of formaldehyde and acetaldehyde were determined by comparison of compound concentrations upstream and downstream of the reactor. There was general agreement between compound conversions efficiencies determined individually and in the mixture. This suggests that competition among compounds for active sites on the photocatalyst surface will not limit the performance of the UVPCO device when the total VOC concentration is low. A possible exception was the very volatile alcohols, for which there were some indications of competitive adsorption. The results also showed that formaldehyde was produced from many commonly encountered VOCs, while acetaldehyde was generated by specific VOCs, particularly ethanol. The implication is that formaldehyde concentrations are likely to increase when an effective UVPCO air cleaner is used in

  14. The trickle-down theory of cleaner air.

    PubMed Central

    Frazer, L

    2000-01-01

    The 1990 Clean Air Act Amendments prompted an increased urgency to find new ways to treat airstreams containing volatile organic compounds, which affect the nitrogen photolytic cycle and help produce ground-level ozone, hazardous air pollutants, and odorous air emissions such as hydrogen sulfide. Scientists at the New Jersey company Envirogen have adapted traditional biofiltration technology to perform airborne waste stream cleanup. Preliminary research on pollutants such as phenol, methylene chloride, benzene, and toluene indicates that Envirogen's biotrickling filter may remove an average of about 94% of total hazardous air pollutants. Scientists are working to identify microbes that will clean up more stubborn pollutants. PMID:10753107

  15. The Diesel Paradox: Why Dieselization Will Lead to Cleaner Air

    SciTech Connect

    Eberhardt, James J.

    2000-08-20

    There are challenges facing the U.S. and the world that are brought on by the growing demand for transporting people and goods. These include the growing consumption of petroleum, urban air pollution, and global climate change.

  16. Air cleaners for indoor-air-pollution control (Chapter 10). Book chapter, Feb 89-Jul 90

    SciTech Connect

    Viner, A.S.; Ramanathan, K.; Hanley, J.T.; Smith, D.D.; Ensor, D.S.

    1991-01-01

    The chapter describes an experimental study to evaluate performance characteristics of currently available controls for indoor air pollutants, including both particles and gases. The study evaluated the particle-size-dependent collection efficiency of seven commercially available devices for particulate control: a common furnace filter, four industrial filters, and two electronic air cleaners (EACs). The furnance filter had negligible effect on particles with diameters between 0.1 and 1 micrometer. The industrial filters, with ASHRAE ratings of 95, 85, 65, and 40% showed minimum efficiency at about 0.1 micrometer, which was substantially less than the ASHRAE efficiency. One EAC, essentially a furnance filter with a high-voltage electrode, reached a maximum efficiency of 30% at low flowrates (7 cu m/min); however, it had a negligible effect at higher flowrates. The other EAC, similar to an industrial ESP, showed efficiencies of 80-90% over the entire size range at low to moderate flowrates. At the highest flowrate, a minimum efficiency was detected at 0.35 micrometer. The study also evaluated the suitability of commerically available carbon-based sorbents (wood, coal, and coconut) for removing low concentrations of volatile organic compounds (benzene, acetaldehyde, and 1,1,1-trichloroethane).

  17. Reassessing the human health benefits from cleaner air.

    PubMed

    Cox, Louis Anthony

    2012-05-01

    Recent proposals to further reduce permitted levels of air pollution emissions are supported by high projected values of resulting public health benefits. For example, the Environmental Protection Agency recently estimated that the 1990 Clean Air Act Amendment (CAAA) will produce human health benefits in 2020, from reduced mortality rates, valued at nearly $2 trillion per year, compared to compliance costs of $65 billion ($0.065 trillion). However, while compliance costs can be measured, health benefits are unproved: they depend on a series of uncertain assumptions. Among these are that additional life expectancy gained by a beneficiary (with median age of about 80 years) should be valued at about $80,000 per month; that there is a 100% probability that a positive, linear, no-threshold, causal relation exists between PM(2.5) concentration and mortality risk; and that progress in medicine and disease prevention will not greatly diminish this relationship. We present an alternative uncertainty analysis that assigns a positive probability of error to each assumption. This discrete uncertainty analysis suggests (with probability >90% under plausible alternative assumptions) that the costs of CAAA exceed its benefits. Thus, instead of suggesting to policymakers that CAAA benefits are almost certainly far larger than its costs, we believe that accuracy requires acknowledging that the costs purchase a relatively uncertain, possibly much smaller, benefit. The difference between these contrasting conclusions is driven by different approaches to uncertainty analysis, that is, excluding or including discrete uncertainties about the main assumptions required for nonzero health benefits to exist at all. PMID:22050234

  18. CHARACTERIZATION OF OZONE EMISSIONS FROM AIR CLEANERS EQUIPPED WITH OZONE GENERATORS AND SENSOR AND FEEDBACK CONTROL CIRCUITRY

    EPA Science Inventory

    The paper give results of a characterization of ozone emissions from air cleaners equipped with ozone generators and sensor and feedback control circuitry. Ozone emission rates of several consumer appliances, marketed as indoor air treatment or air purification systems, were det...

  19. Traffic-related air pollution: Exposure and health effects in Copenhagen street cleaners and cemetery workers

    SciTech Connect

    Raaschou-Nielsen, O.; Nielsen, M.L.; Gehl, J.

    1995-05-01

    This questionaire-based study found a significantly higher prevalence of chronic bronchitis, asthma, and several other symptoms in 116 Copenhagen street cleaners who were exposed to traffic-related air pollution at levels that were slightly lower than the 1987 World Health Organization-recommended threshold values, compared with 115 Copenhagen cemetery workers exposed to lower pollution levels. Logistic regression analysis, controlling for age and smoking, was conducted, and odds ratios and 95% confidence intervals were calculated to be 2.5 for chronic bronchitis (95% confidence interval = 1.2-5.1), 2.3 for asthma (95% confidence interval = 1.0-5.1), and 1.8-7.9 for other symptoms (95% confidence interval = 1.0-28.2). Except for exposure to air pollution, the two groups were comparable, i.e., they had similar terms of employment and working conditions. the exposure ranges during an 8-h work day, averaged from readings taken at five monitored street positions, were: 41-257 ppb nitric oxide (1-h max: 865 ppb); 23-43 ppb nitrogen dioxide (1-h max: 208 ppb); 1.0-4.3 ppm carbon monoxide (8-h max: 7.1 ppm); 14-28 ppb sulfur dioxide (1-h max; 112 ppb); and 10-38 ppb ozone (1-h max: 72 ppb). 33 refs., 7 tabs.

  20. The effectiveness of an air cleaner in controlling droplet/aerosol particle dispersion emitted from a patient's mouth in the indoor environment of dental clinics

    PubMed Central

    Chen, Chun; Zhao, Bin; Cui, Weilin; Dong, Lei; An, Na; Ouyang, Xiangying

    2010-01-01

    Dental healthcare workers (DHCWs) are at high risk of occupational exposure to droplets and aerosol particles emitted from patients' mouths during treatment. We evaluated the effectiveness of an air cleaner in reducing droplet and aerosol contamination by positioning the device in four different locations in an actual dental clinic. We applied computational fluid dynamics (CFD) methods to solve the governing equations of airflow, energy and dispersion of different-sized airborne droplets/aerosol particles. In a dental clinic, we measured the supply air velocity and temperature of the ventilation system, the airflow rate and the particle removal efficiency of the air cleaner to determine the boundary conditions for the CFD simulations. Our results indicate that use of an air cleaner in a dental clinic may be an effective method for reducing DHCWs' exposure to airborne droplets and aerosol particles. Further, we found that the probability of droplet/aerosol particle removal and the direction of airflow from the cleaner are both important control measures for droplet and aerosol contamination in a dental clinic. Thus, the distance between the air cleaner and droplet/aerosol particle source as well as the relative location of the air cleaner to both the source and the DHCW are important considerations for reducing DHCWs' exposure to droplets/aerosol particles emitted from the patient's mouth during treatments. PMID:20031985

  1. Fault diagnosis of a vacuum cleaner motor by means of sound analysis

    NASA Astrophysics Data System (ADS)

    Benko, U.; Petrovčič, J.; Juričić, Đ.; Tavčar, J.; Rejec, J.; Stefanovska, A.

    2004-09-01

    Achieving high quality standards and 100% defect-free deliverables is becoming a trend among manufacturers of household appliances. In that respect, thorough and reliable end-tests represent an important step towards this goal. This paper deals with the design of end-test procedures for vacuum cleaner motors based on sound analysis. It is well known that sound carries important information about the condition of contact surfaces in rotating parts. The paper aims first to provide a thorough analysis of sound sources within the motor. Second, by using simple yet effective signal processing tools, it is shown that with sound analysis alone it is possible to clearly distinguish fault-free motors from those with mechanical faults. Moreover, the proposed algorithm exhibits a certain isolation capability, i.e., it is able to distinguish three clusters of faults. Finally, a summary of experimental results obtained on a sample of 75 motors is provided.

  2. Effects of HEPA Air Cleaners on Unscheduled Asthma Visits and Asthma Symptoms for Children Exposed to Secondhand Tobacco Smoke

    PubMed Central

    Hornung, Richard W.; Khoury, Jane; Yolton, Kimberly; Lierl, Michelle; Kalkbrenner, Amy

    2011-01-01

    OBJECTIVE: The goal was to test the effects of high-efficiency, particulate-arresting (HEPA) air cleaners on unscheduled asthma visits and symptoms among children with asthma exposed to secondhand smoke. METHODS: We enrolled 225 eligible children who were 6 to 12 years of age, had physician-diagnosed asthma, and were exposed to ≥5 cigarettes per day. We conducted a double-blind, randomized trial. Children were assigned randomly to receive 2 active or inactive HEPA air cleaners. RESULTS: Of 225 enrolled children, 110 (49%) were assigned to the intervention group and 115 (51%) to the control group; 215 (95%) completed the trial. During the trial, there were 42 fewer unscheduled asthma visits among children in the intervention group (18.5% [95% confidence interval: 1.25%–82.75%]; P = .043), compared with those in the control group, after adjustment for baseline differences. There was a significant difference in the reductions of levels of particles of >0.3 μm according to group assignment; there was a 25% reduction in particle levels in the intervention group, compared with a 5% reduction in the control group (P = .026). There were no significant differences in parent-reported asthma symptoms, exhaled nitric-oxide levels, air nicotine levels, or cotinine levels according to group assignment. CONCLUSIONS: These results hold promise for using HEPA air cleaners as part of a multifaceted strategy to reduce asthma morbidity, but further research is necessary before they can be recommended routinely for the medical management of asthma. PMID:21149427

  3. Diethylene glycol mono butyl ether concentrations in room air from application of cleaner formulations to hard surfaces.

    PubMed

    Gibson, W B; Keller, P R; Foltz, D J; Harvey, G J

    1991-07-01

    Diethylene glycol monobutyl ether (DGBE) is a solvent used in some liquid hard surface cleaners. We evaluated the inhalation component of consumer exposure in the home to DGBE from the use of cleaning products containing up to 9% DGBE. Several experiments were conducted with restricted room air flow, exaggerated amounts of cleaning solutions, and no rinsing in order to develop an exposure scenario that would exceed exposures likely encountered by consumers. DGBE vapors in the air were monitored by collection on charcoal tubes, followed by desorption and quantitation by gas chromatography. Air was collected from the centre of the room and from the breathing zone of the person doing the washing task. Room air concentrations of DGBE showed peak values between one and three hours after task initiation; DGBE concentrations then gradually decreased with time. Peak concentrations did not exceed 1.6 ppmv. The total DGBE in the air at the time of maximum air concentrations accounted for only 1 to 3% of the DGBE on the washed surfaces. The person doing the washing task was exposed to average DGBE concentrations in the breathing zone below 0.8 ppmv in all experiments. The methods described for measuring DGBE concentrations in air are generally applicable to other solvents and easily adaptable to various experimental situations. PMID:1824325

  4. Tractor-Maintenance: Operation & Daily Care [and] Servicing Air Cleaner & Lubrication. Student Materials. V. A. III. [V-C-1 through V-C-4].

    ERIC Educational Resources Information Center

    Texas A and M Univ., College Station. Vocational Instructional Services.

    Designed for use by students in vocational agricultural classes, this manual deals with tractor maintenance. Operation and daily care are the topics of the first section. Safety is also covered. In the final part of the manual, servicing the air cleaner and lubricating the engine are discussed. Both sections conclude with a quiz. (PLB)

  5. Improving Vacuum Cleaners

    NASA Technical Reports Server (NTRS)

    1997-01-01

    Under a Space Act Agreement between the Kirby company and Lewis Research Center, NASA technology was applied to a commercial vacuum cleaner product line. Kirby engineers were interested in advanced operational concepts, such as particle flow behavior and vibration, critical factors to improve vacuum cleaner performance. An evaluation of the company 1994 home care system, the Kirby G4, led to the refinement of the new G5 and future models. Under the cooperative agreement, Kirby had access to Lewis' holography equipment, which added insight into how long a vacuum cleaner fan would perform, as well as advanced computer software that can simulate the flow of air through fans. The collaboration resulted in several successes including fan blade redesign and continuing dialogue on how to improve air-flow traits in various nozzle designs.

  6. Driving Students and Parents to Cleaner Air: An Interview with Michelle Waters

    ERIC Educational Resources Information Center

    Curriculum Review, 2006

    2006-01-01

    After spending three years as a kindergarten teacher and one as a reading specialist, Michelle Waters recently became the education outreach coordinator for the Georgia-based Clean Air Campaign. In that role, she has helped roll out a comprehensive Better Air Schools initiative to 20 Atlanta-area elementary schools. The program includes a…

  7. The transfer of carbon fibers through a commercial aircraft water separator and air cleaner

    NASA Technical Reports Server (NTRS)

    Meyers, J. A.

    1979-01-01

    The fraction of carbon fibers passing through a water separator and an air filter was determined in order to estimate the proportion of fibers outside a closed aircraft that are transmitted to the electronics through the air conditioning system. When both devices were used together and only fibers 3 mm or larger were considered, a transfer function of .001 was obtained.

  8. Effectiveness of auxiliary air cleaners in reducing ETS components in offices

    SciTech Connect

    Pierce, W.M.; Janczewski, J.N.; Roethlisberger, B.; Pelton, M.; Kunstel, K.

    1996-11-01

    A field study was conducted to evaluate the effectiveness of several auxiliary air cleaning services in reducing components of environmental tobacco smoke (ETS) within a designated smoking lounge and ambient areas in an office suite. Monitoring was performed for the ETS components nicotine, respirable particulate and carbon monoxide. Nicotine and RSP samples were collected in a smoking lounge for two eight-hour periods for each of the following conditions: (1) no smoking in the office suite with no air cleaning devices operating; (2) smoking in the smoking lounge with no clean air devices operating; and (3) smoking in the smoking lounge with one of four air cleaning devices operating. Eight-hour general area and personal samples were also collected to determine levels of nicotine and RSP in ambient, non-smoking areas. Continuous monitoring, with one minute averaging, was performed for carbon monoxide using a direct reading air quality monitor.

  9. Effects on well-being of investing in cleaner air in India.

    PubMed

    Sanderson, Warren; Striessnig, Erich; Schöpp, Wolfgang; Amann, Markus

    2013-01-01

    Over the past decade, India has experienced rapid economic growth along with increases in levels of air pollution. Our goal is to examine how alternative policies for air pollution abatement affect well-being there. In particular, we estimate the effects of policies to reduce the levels of ambient fine particulates (PM2.5), which are especially harmful to human health, on well-being, quantified using the United Nations' human development index (HDI). Two of the three dimensions of this index are based on gross domestic product (GDP) per capita and life expectancy. Our approach allows reductions in PM2.5 to affect both of them. In particular, economic growth is affected negatively through the costs of the additional pollution control measures and positively through the increased productivity of the population. We consider three scenarios of PM2.5 abatement, corresponding to no further control, current Indian legislation, and current European legislation. The overall effect in both control scenarios is that growth in GDP is virtually unaffected relative to the case of no further controls, life expectancy is higher, and well-being, as measured by the HDI, is improved. In India, air pollution abatement investments clearly improve well-being. PMID:24144316

  10. Air filters and air cleaners: Rostrum by the American Academy of Allergy, Asthma & Immunology Indoor Allergen Committee

    PubMed Central

    Sublett, James L.; Seltzer, James; Burkhead, Robert; Williams, P. Brock; Wedner, H. James; Phipatanakul, Wanda

    2010-01-01

    The allergist is generally recognized as possessing the greatest expertise in relating airborne contaminants to respiratory health, both atopic and nonatopic. Consequently, allergists are most often asked for their professional opinions regarding the appropriate use of air-cleaning equipment. This rostrum serves as a resource for the allergist and other health care professionals seeking a better understanding of air filtration. PMID:19910039

  11. The potential of a new air cleaner to reduce airborne microorganisms in pig house air: preliminary results.

    PubMed

    Schulz, Jochen; Bao, Endong; Clauss, Marcus; Hartung, Jörg

    2013-01-01

    There is a need for technical solutions to reduce the concentrations of bioaerosols in the air and in the exhaust air of livestock buildings. A prototype of an air washer combined with a UV-irradiation system was positioned in a commercial pig fattening unit to test its efficiency of reducing culturable airborne microorganisms. No significant reduction in airborne bacteria and fungi was observed when untreated air passed through the device. However, when the air washer or the UV-irradiation system was activated, the concentrations of mesophilic aerobic bacteria, methicillin resistant Staphylococcus aureus and mesophilic aerotolerant cocci were reduced significantly (p < 0.01). Washing the air reduced bacteria by 84 to 96% and the relative reduction due to UV-irradiation ranged between 55 and 90%. The highest relative reduction in airborne bacteria (90 to 99%) was detected when the air washer and the UV-irradiation systems were in simultaneous operation. The concentration of total airborne fungi was reduced significantly (p < 0.05) only when the air was washed and UV-irradiated. Although these preliminary results provided significant and comprehensible findings, long-term studies are required to assess the efficiency of the device in more detail.The combination of air washing and UV-irradiation seem to be a useful technique for abating airborne microorganisms within or emitting from piggery buildings. However, some technical problems remain, such as the deposition of particulate matter on the surface of UV-irradiators and the consumption of fresh water by the air washer. These issues must be resolved before the system may be implemented for general practice. PMID:23540197

  12. Experimental Study on Ultrafine Particle Removal Performance of Portable Air Cleaners with Different Filters in an Office Room.

    PubMed

    Ma, Huan; Shen, Henggen; Shui, Tiantian; Li, Qing; Zhou, Liuke

    2016-01-01

    Size- and time-dependent aerodynamic behaviors of indoor particles, including PM1.0, were evaluated in a school office in order to test the performance of air-cleaning devices using different filters. In-situ real-time measurements were taken using an optical particle counter. The filtration characteristics of filter media, including single-pass efficiency, volume and effectiveness, were evaluated and analyzed. The electret filter (EE) medium shows better initial removal efficiency than the high efficiency (HE) medium in the 0.3-3.5 μm particle size range, while under the same face velocity, the filtration resistance of the HE medium is several times higher than that of the EE medium. During service life testing, the efficiency of the EE medium decreased to 60% with a total purifying air flow of 25 × 10⁴ m³/m². The resistance curve rose slightly before the efficiency reached the bottom, and then increased almost exponentially. The single-pass efficiency of portable air cleaner (PAC) with the pre-filter (PR) or the active carbon granule filter (CF) was relatively poor. While PAC with the pre-filter and the high efficiency filter (PR&HE) showed maximum single-pass efficiency for PM1.0 (88.6%), PAC with the HE was the most effective at removing PM1.0. The enhancement of PR with HE and electret filters augmented the single-pass efficiency, but lessened the airflow rate and effectiveness. Combined with PR, the decay constant of large-sized particles could be greater than for PACs without PR. Without regard to the lifetime, the electret filters performed better with respect to resource saving and purification improvement. A most penetrating particle size range (MPPS: 0.4-0.65 μm) exists in both HE and electret filters; the MPPS tends to become larger after HE and electret filters are combined with PR. These results serve to provide a better understanding of the indoor particle removal performance of PACs when combined with different kinds of filters in school

  13. Experimental Study on Ultrafine Particle Removal Performance of Portable Air Cleaners with Different Filters in an Office Room

    PubMed Central

    Ma, Huan; Shen, Henggen; Shui, Tiantian; Li, Qing; Zhou, Liuke

    2016-01-01

    Size- and time-dependent aerodynamic behaviors of indoor particles, including PM1.0, were evaluated in a school office in order to test the performance of air-cleaning devices using different filters. In-situ real-time measurements were taken using an optical particle counter. The filtration characteristics of filter media, including single-pass efficiency, volume and effectiveness, were evaluated and analyzed. The electret filter (EE) medium shows better initial removal efficiency than the high efficiency (HE) medium in the 0.3–3.5 μm particle size range, while under the same face velocity, the filtration resistance of the HE medium is several times higher than that of the EE medium. During service life testing, the efficiency of the EE medium decreased to 60% with a total purifying air flow of 25 × 104 m3/m2. The resistance curve rose slightly before the efficiency reached the bottom, and then increased almost exponentially. The single-pass efficiency of portable air cleaner (PAC) with the pre-filter (PR) or the active carbon granule filter (CF) was relatively poor. While PAC with the pre-filter and the high efficiency filter (PR&HE) showed maximum single-pass efficiency for PM1.0 (88.6%), PAC with the HE was the most effective at removing PM1.0. The enhancement of PR with HE and electret filters augmented the single-pass efficiency, but lessened the airflow rate and effectiveness. Combined with PR, the decay constant of large-sized particles could be greater than for PACs without PR. Without regard to the lifetime, the electret filters performed better with respect to resource saving and purification improvement. A most penetrating particle size range (MPPS: 0.4–0.65 μm) exists in both HE and electret filters; the MPPS tends to become larger after HE and electret filters are combined with PR. These results serve to provide a better understanding of the indoor particle removal performance of PACs when combined with different kinds of filters in school

  14. Swimming pool cleaner poisoning

    MedlinePlus

    Swimming pool cleaner poisoning occurs when someone swallows this type of cleaner, touches it, or breathes in ... The harmful substances in swimming pool cleaner are: Bromine ... copper Chlorine Soda ash Sodium bicarbonate Various mild acids

  15. Modeling monthly mean air temperature for Brazil

    NASA Astrophysics Data System (ADS)

    Alvares, Clayton Alcarde; Stape, José Luiz; Sentelhas, Paulo Cesar; de Moraes Gonçalves, José Leonardo

    2013-08-01

    Air temperature is one of the main weather variables influencing agriculture around the world. Its availability, however, is a concern, mainly in Brazil where the weather stations are more concentrated on the coastal regions of the country. Therefore, the present study had as an objective to develop models for estimating monthly and annual mean air temperature for the Brazilian territory using multiple regression and geographic information system techniques. Temperature data from 2,400 stations distributed across the Brazilian territory were used, 1,800 to develop the equations and 600 for validating them, as well as their geographical coordinates and altitude as independent variables for the models. A total of 39 models were developed, relating the dependent variables maximum, mean, and minimum air temperatures (monthly and annual) to the independent variables latitude, longitude, altitude, and their combinations. All regression models were statistically significant ( α ≤ 0.01). The monthly and annual temperature models presented determination coefficients between 0.54 and 0.96. We obtained an overall spatial correlation higher than 0.9 between the models proposed and the 16 major models already published for some Brazilian regions, considering a total of 3.67 × 108 pixels evaluated. Our national temperature models are recommended to predict air temperature in all Brazilian territories.

  16. 30 CFR 75.326 - Mean entry air velocity.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Mean entry air velocity. 75.326 Section 75.326... MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.326 Mean entry air velocity. In exhausting face ventilation systems, the mean entry air velocity shall be at least 60 feet per...

  17. 30 CFR 75.326 - Mean entry air velocity.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Mean entry air velocity. 75.326 Section 75.326... MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.326 Mean entry air velocity. In exhausting face ventilation systems, the mean entry air velocity shall be at least 60 feet per...

  18. 30 CFR 75.326 - Mean entry air velocity.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Mean entry air velocity. 75.326 Section 75.326... MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.326 Mean entry air velocity. In exhausting face ventilation systems, the mean entry air velocity shall be at least 60 feet per...

  19. 30 CFR 75.326 - Mean entry air velocity.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Mean entry air velocity. 75.326 Section 75.326... MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.326 Mean entry air velocity. In exhausting face ventilation systems, the mean entry air velocity shall be at least 60 feet per...

  20. Drain cleaner poisoning

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/002779.htm Drain cleaner poisoning To use the sharing features on this page, please enable JavaScript. Drain cleaners contain very dangerous chemicals that can be ...

  1. Metal cleaner poisoning

    MedlinePlus

    Metal cleaners are very strong chemical products that contain acids. This article discusses poisoning from swallowing or ... Metal cleaners contain organic compounds called hydrocarbons, including: 1,2-butylene oxide Boric acid Cocoyl sarcosine Dicarboxylic ...

  2. ENVIRONMENTAL TECHNOLOGY VERIFICATION--GENERIC VERIFICATION PROTOCOL FOR BIOLOGICAL AND AEROSOL TESTING OF GENERAL VENTILATION AIR CLEANERS

    EPA Science Inventory

    Under EPA's Environmental Technology Verification Program, Research Triangle Institute (RTI) will operate the Air Pollution Control Technology Center to verify the filtration efficiency and bioaerosol inactivation efficiency of heating, ventilation and air conditioning air cleane...

  3. Benefits and technological challenges in the implementation of TiO2-based ultraviolet photocatalytic oxidation (UVPCO) air cleaners

    SciTech Connect

    Hodgson, Al; Destaillats, Hugo; Hotchi, Toshifumi; Fisk, William J.

    2008-10-01

    Heating, ventilating, and cooling classrooms in California consume substantial electrical energy. Indoor air quality (IAQ) in classrooms affects student health and performance. In addition to airborne pollutants that are emitted directly by indoor sources and those generated outdoors, secondary pollutants can be formed indoors by chemical reaction of ozone with other chemicals and materials. Filters are used in nearly all classroom heating, ventilation and air-conditioning (HVAC) systems to maintain energy-efficient HVAC performance and improve indoor air quality; however, recent evidence indicates that ozone reactions with filters may, in fact, be a source of secondary pollutants. This project quantitatively evaluated ozone deposition in HVAC filters and byproduct formation, and provided a preliminary assessment of the extent to which filter systems are degrading indoor air quality. The preliminary information obtained will contribute to the design of subsequent research efforts and the identification of energy efficient solutions that improve indoor air quality in classrooms and the health and performance of students.

  4. Validation of Interannual Differences of AIRS Monthly Mean Parameters

    NASA Technical Reports Server (NTRS)

    Susskind, Joel; Iredell, Lena; Keita, Fricky; Molnar, Gyula

    2005-01-01

    Monthly mean fields of select geophysical parameters derived from analysis of AIRS/AMSU data, and their interannual differences, are shown and compared with analogous fields derived from other sources. All AIRS fields are derived using the AIRS Science Team Version 4 algorithm. Monthly mean results are shown for January 2004, as are interannual differences between January 2004 and January 2003. AIRS temperature and water vapor profile fields are compared with monthly mean collocated ECMWF 3 hour forecast and monthly mean TOVS Pathfinder Path A data. AIRS Tropospheric and Stratospheric coarse climate indicators are compared with analogous MSU products derived by Spencer and christy and found in the TOVS Pathfinder Path A data set. Total ozone is compared with results produced by TOMS. OLR is compared with OLR derived using CERES data and found in the TOVS Pathfinder Path A data set. AIRS results agree well in all cases, especially in the interannual difference sense.

  5. QFD analysis of RSRM aqueous cleaners

    NASA Technical Reports Server (NTRS)

    Marrs, Roy D.; Jones, Randy K.

    1995-01-01

    This paper presents a Quality Function Deployment (QFD) analysis of the final down-selected aqueous cleaners to be used on the Redesigned Solid Rocket Motor (RSRM) program. The new cleaner will replace solvent vapor degreasing. The RSRM Ozone Depleting Compound Elimination program is discontinuing the methyl chloroform vapor degreasing process and replacing it with a spray-in-air aqueous cleaning process. Previously, 15 cleaners were down-selected to two candidates by passing screening tests involving toxicity, flammability, cleaning efficiency, contaminant solubility, corrosion potential, cost, and bond strength. The two down-selected cleaners were further evaluated with more intensive testing and evaluated using QFD techniques to assess suitability for cleaning RSRM case and nozzle surfaces in preparation for adhesive bonding.

  6. Quantification of emission reduction potentials of primary air pollutants from residential solid fuel combustion by adopting cleaner fuels in China.

    PubMed

    Shen, Guofeng

    2015-11-01

    Residential low efficient fuel burning is a major source of many air pollutants produced during incomplete combustions, and household air pollution has been identified as one of the top environmental risk factors. Here we compiled literature-reported emission factors of pollutants including carbon monoxide (CO), total suspended particles (TSPs), PM2.5, organic carbon (OC), elemental carbon (EC) and polycyclic aromatic hydrocarbons (PAHs) for different household energy sources, and quantified the potential for emission reduction by clean fuel adoption. The burning of crop straws, firewood and coal chunks in residential stoves had high emissions per unit fuel mass but lower thermal efficiencies, resulting in high levels of pollution emissions per unit of useful energy, whereas pelletized biofuels and coal briquettes had lower pollutant emissions and higher thermal efficiencies. Briquetting coal may lead to 82%-88% CO, 74%-99% TSP, 73%-76% PM2.5, 64%-98% OC, 92%-99% EC and 80%-83% PAH reductions compared to raw chunk coal. Biomass pelletizing technology would achieve 88%-97% CO, 73%-87% TSP, 79%-88% PM2.5, 94%-96% OC, 91%-99% EC and 63%-96% PAH reduction compared to biomass burning. The adoption of gas fuels (i.e., liquid petroleum gas, natural gas) would achieve significant pollutant reduction, nearly 96% for targeted pollutants. The reduction is related not only to fuel change, but also to the usage of high efficiency stoves. PMID:26574082

  7. Swimming pool cleaner poisoning

    MedlinePlus

    ... or breathes in its fumes. These cleaners contain chlorine and acids. Chlorine is more likely than the acids to cause ... are: Bromine Calcium chloride Calcium hypochlorite Chelated copper Chlorine Soda ash Sodium bicarbonate Various mild acids

  8. Metal cleaner poisoning

    MedlinePlus

    Metal cleaners contain organic compounds called hydrocarbons, including: 1,2-butylene oxide Boric acid Cocoyl sarcosine Dicarboxylic fatty acid Dimethoxymethane Dodecanedioic acid N-propyl bromide Sodium hydroxide T-butanol

  9. GSOD Based Daily Global Mean Surface Temperature and Mean Sea Level Air Pressure (1982-2011)

    SciTech Connect

    Xuan Shi, Dali Wang

    2014-05-05

    This data product contains all the gridded data set at 1/4 degree resolution in ASCII format. Both mean temperature and mean sea level air pressure data are available. It also contains the GSOD data (1982-2011) from NOAA site, contains station number, location, temperature and pressures (sea level and station level). The data package also contains information related to the data processing methods

  10. Persistence analysis of daily mean air temperature variation in Georgia

    NASA Astrophysics Data System (ADS)

    Matcharashvili, Teimuraz; Chelidze, Tamaz; Zhukova, Natalia; Mepharidze, Ekaterine; Sborshchikov, Alexander

    2010-05-01

    Extrapolation of observed linear trends is common practice in climate change researches on different scales. In this respect it is important, that though global warming is well established, the question of persistence of trends on regional scales remain controversial. Indeed, climate change for specific region and time by definition includes more than the simple average of weather conditions. Either random events or long-term changes, or more often combinations of them, can bring about significant swings in a variety of climate indicators from one time period to the next. Therefore in order to achieve further understanding of dynamics of climate change the character of stable peculiarities of analyzed dynamics should be investigated. Analysis of the character of long range correlations in climatological time series or peculiarities of their inherent memory is motivated exactly by this goal. Such analysis carried out on a different scales may help to understand spatial and temporal features of regional climate change. In present work the problem of persistence of observed trends in air temperature time series in Georgia was investigated. Longest available mean daily temperature time series of Tbilisi (1890-2008) were analyzed. Time series on shorter time scales of five stations in the West and East Georgia also were considered as well as monthly mean temperature time series of five stations. Additionally, temporally and spatially averaged daily and monthly mean air temperature time series were analyzed. Extent of persistence in mentioned time series were evaluated using R/S analysis calculation. Detrended and Multifractal Detrended Fluctuation Analysis as well as multi scaling analysis based on CWT have been used. Our results indicate that variation of daily or monthly mean temperatures reveals clear antipersistence on whole available time scale. It seems that antipersistence on global scale is general characteristics of mean air temperature variation and is not

  11. Spatial interpolation of monthly mean air temperature data for Latvia

    NASA Astrophysics Data System (ADS)

    Aniskevich, Svetlana

    2016-04-01

    Temperature data with high spatial resolution are essential for appropriate and qualitative local characteristics analysis. Nowadays the surface observation station network in Latvia consists of 22 stations recording daily air temperature, thus in order to analyze very specific and local features in the spatial distribution of temperature values in the whole Latvia, a high quality spatial interpolation method is required. Until now inverse distance weighted interpolation was used for the interpolation of air temperature data at the meteorological and climatological service of the Latvian Environment, Geology and Meteorology Centre, and no additional topographical information was taken into account. This method made it almost impossible to reasonably assess the actual temperature gradient and distribution between the observation points. During this project a new interpolation method was applied and tested, considering auxiliary explanatory parameters. In order to spatially interpolate monthly mean temperature values, kriging with external drift was used over a grid of 1 km resolution, which contains parameters such as 5 km mean elevation, continentality, distance from the Gulf of Riga and the Baltic Sea, biggest lakes and rivers, population density. As the most appropriate of these parameters, based on a complex situation analysis, mean elevation and continentality was chosen. In order to validate interpolation results, several statistical indicators of the differences between predicted values and the values actually observed were used. Overall, the introduced model visually and statistically outperforms the previous interpolation method and provides a meteorologically reasonable result, taking into account factors that influence the spatial distribution of the monthly mean temperature.

  12. Change point analysis of mean annual air temperature in Iran

    NASA Astrophysics Data System (ADS)

    Shirvani, A.

    2015-06-01

    The existence of change point in the mean of air temperature is an important indicator of climate change. In this study, Student's t parametric and Mann-Whitney nonparametric Change Point Models (CPMs) were applied to test whether a change point has occurred in the mean of annual Air Temperature Anomalies Time Series (ATATS) of 27 synoptic stations in different regions of Iran for the period 1956-2010. The Likelihood Ratio Test (LRT) was also applied to evaluate the detected change points. The ATATS of all stations except Bandar Anzali and Gorgan stations, which were serially correlated, were transformed to produce an uncorrelated pre-whitened time series as an input file for the CPMs and LRT. Both the Student's t and Mann-Whitney CPMs detected the change point in the ATATS of (a) Tehran Mehrabad, Abadan, Kermanshah, Khoramabad and Yazd in 1992, (b) Mashhad and Tabriz in 1993, (c) Bandar Anzali, Babolsar and Ramsar in 1994, (d) Kerman and Zahedan in 1996 at 5% significance level. The likelihood ratio test shows that the ATATS before and after detected change points in these 12 stations are normally distributed with different means. The Student's t and Mann-Whitney CPMs suggested different change points for individual stations in Bushehr, Bam, Shahroud, and Gorgan. However, the LRT confirmed the change points in these four stations as 1997, 1996, 1993, and 1996, respectively. No change points were detected in the remaining 11 stations.

  13. Ultrasonic cleaner evaluation

    NASA Astrophysics Data System (ADS)

    Gillespie, T. J.

    1980-10-01

    A method to evaluate the capabilities of ultrasonic cleaners is described. This method utilizes a ceramic plate on which a metallized coating has been deposited. The plate is immersed in a beaker filled with DI water and a few drops of liquid detergent. The plate is then subjected to a two-minute cleaning cycle. Measurement of the amount of metallized coating that is removed is determined with an image enhancement system. Use of this test reveals several factors that influence cleaning capabilities. These include system frequency, use of a wetting agent in the bath, bath temperature, fixture materials and fixture mounting.

  14. Cleaner in Hall of Residence

    ERIC Educational Resources Information Center

    Hotel and Catering Industry Training Board, Wembley (England).

    This syllabus is intended for the use of training personnel in drawing up training programs for cleaners in halls of residence. Its main objective is to produce fully trained cleaners, thereby maintaining and raising standards. The syllabus is divided into three sections: Introduction to Housekeeping Employees, and Tasks Performed by the Majority…

  15. Diesel exhaust cleaner with burner vortex chamber

    SciTech Connect

    Riddel, J.W.

    1983-05-17

    A diesel engine exhaust cleaner and burner system includes at least one exhaust cleaner member with a filter positioned therein to effect removal of particulates from a stream of exhaust gas delivered thereto via an inlet manifold. A fuel burner supplied with fuel by a fuel nozzle is operatively associated with the inlet manifold to supply the necessary heat to effect incineration of particulates collected on the filter. A cyclone duct providing a vortex chamber therein is operatively positioned downstream of the fuel nozzle and is supplied with sufficient air so as to effect both the complete combustion of the fuel and the controlled incineration of the particulates by increasing the residence time of the fuel in the reaction region within the vortex chamber and also effecting a more uniform distribution of the heat of combustion across the inlet face of the filter for the uniform heating of the particulates thereon to their combustion temperature.

  16. Supersonic-Spray Cleaner

    NASA Technical Reports Server (NTRS)

    Caimi, Raoul E. B.; Lin, Feng-Nan; Thaxton, Eric A.

    1995-01-01

    Spraying system for cleaning mechanical components uses less liquid and operates at pressures significantly lower. Liquid currently used is water. Designed to replace chlorofluorocarbon (CFC) solvent-based cleaning and cleanliness verification methods. Consists of spray head containing supersonic converging/diverging nozzles, source of gas at regulated pressure, pressurized liquid tank, and various hoses, fittings, valves, and gauges. Parameters of nozzles set so any of large variety of liquids and gases combined in desired ratio and rate of flow. Size and number of nozzles varied so system built in configurations ranging from small hand-held spray heads to large multinozzle cleaners. Also used to verify part adequately cleaned. Runoff liquid from spray directed at part collected. Liquid analyzed for presence of contaminants, and part recleaned if necessary.

  17. Evaluation of Alkaline Cleaner Materials

    NASA Technical Reports Server (NTRS)

    Partz, Earl

    1998-01-01

    Alkaline cleaners used to process aluminum substrates have contained chromium as the corrosion inhibitor. Chromium is a hazardous substance whose use and control are described by environmental laws. Replacement materials that have the characteristics of chromated alkaline cleaners need to be found that address both the cleaning requirements and environmental impacts. This report will review environmentally friendly candidates evaluated as non-chromium alkaline cleaner replacements and methods used to compare those candidates one versus another. The report will also list characteristics used to select candidates based on their declared contents. It will also describe and evaluate methods used to discriminate among the large number of prospective candidates.

  18. Health-hazard evaluation report HETA 86-005-1679, Dutch Girl Cleaners, Springdale, Ohio

    SciTech Connect

    Burr, G.A.; Todd, W.

    1986-03-01

    An environmental survey at Dutch Girl Cleaners in the Thriftway Mini Mall, Springdale, Ohio, was conducted on October 25, 1985, and air samples collected on October 30, 1985 from the cleaners, an adjacent supermarket and the enclosed pedestrian mall were analyzed for perchloroethylene.

  19. Development of a Modified Vacuum Cleaner for Lunar Surface Systems

    NASA Technical Reports Server (NTRS)

    Toon, Katherine P.; Lee, Steve A.; Edgerly, Rachel D.

    2009-01-01

    The National Aeronautics and Space Administration (NASA) mission to expand space exploration will return humans to the Moon with the goal of maintaining a long-term presence. One challenge that NASA will face returning to the Moon is managing the lunar regolith found on the Moon's surface, which will collect on extravehicular activity (EVA) suits and other equipment. Based on the Apollo experience, the issues astronauts encountered with lunar regolith included eye/lung irritation, and various hardware failures (seals, screw threads, electrical connectors and fabric contamination), which were all related to inadequate lunar regolith mitigation. A vacuum cleaner capable of detaching, transferring, and efficiently capturing lunar regolith has been proposed as a method to mitigate the lunar regolith problem in the habitable environment on lunar surface. In order to develop this vacuum, a modified "off-the-shelf" vacuum cleaner has been used to determine detachment efficiency, vacuum requirements, and optimal cleaning techniques to ensure efficient dust removal in habitable lunar surfaces, EVA spacesuits, and air exchange volume. During the initial development of the Lunar Surface System vacuum cleaner, systematic testing was performed with varying flow rates on multiple surfaces (fabrics and metallics), atmospheric (14.7 psia) and reduced pressures (10.2 and 8.3 psia), different vacuum tool attachments, and several vacuum cleaning techniques to determine the performance requirements for the vacuum cleaner. The data recorded during testing was evaluated by calculating percent removal, relative to the retained simulant on the tested surface. In addition, Scanning Electron Microscopy (SEM) imaging was used to determine particle size distribution retained on the surface. The scope of this paper is to explain the initial phase of vacuum cleaner development, including historical Apollo mission data, current state-of-the-art vacuum cleaner technology, and vacuum cleaner

  20. Development of a Modified Vacuum Cleaner for Lunar Surface Systems

    NASA Technical Reports Server (NTRS)

    Toon, Katherine P.; Lee, Steve A.; Edgerly, Rachel D.

    2010-01-01

    The National Aeronautics and Space Administration (NASA) mission to expand space exploration will return humans to the Moon with the goal of maintaining a long-term presence. One challenge that NASA will face returning to the Moon is managing the lunar regolith found on the Moon's surface, which will collect on extravehicular activity (EVA) suits and other equipment. Based on the Apollo experience, the issues astronauts encountered with lunar regolith included eye/lung irritation, and various hardware failures (seals, screw threads, electrical connectors and fabric contamination), which were all related to inadequate lunar regolith mitigation. A vacuum cleaner capable of detaching, transferring, and efficiently capturing lunar regolith has been proposed as a method to mitigate the lunar regolith problem in the habitable environment on lunar surface. In order to develop this vacuum, a modified "off-the-shelf' vacuum cleaner will be used to determine detachment efficiency, vacuum requirements, and optimal cleaning techniques to ensure efficient dust removal in habitable lunar surfaces, EVA spacesuits, and air exchange volume. During the initial development of the Lunar Surface System vacuum cleaner, systematic testing was performed with varying flow rates on multiple surfaces (fabrics and metallics), atmospheric (14.7 psia) and reduced pressures (10.2 and 8.3 psia), different vacuum tool attachments, and several vacuum cleaning techniques in order to determine the performance requirements for the vacuum cleaner. The data recorded during testing was evaluated by calculating particulate removal, relative to the retained simulant on the tested surface. In addition, optical microscopy was used to determine particle size distribution retained on the surface. The scope of this paper is to explain the initial phase of vacuum cleaner development, including historical Apollo mission data, current state-of-the-art vacuum cleaner technology, and vacuum cleaner testing that has

  1. CONCENTRATION OF TETRACHLOROETHYLENE IN INDOOR AIR AT A FORMER DRY CLEANER FACILITY AS A FUNCTION OF SUBSURFACE CONTAMINATION: A CASE STUDY

    EPA Science Inventory

    A field study was performed to evaluate indoor air concentrations and vapor intrusion (VI) of tetrachloroethylene (PCE) and other chlorinated solvents at a commercial retail site in Dallas, TX. The building is approximately 40 years old and once housed a dry cleaning operation. R...

  2. Qualification of environmentally friendly cleaners

    SciTech Connect

    De Marquis, G.; Lopez, E.P.

    1995-05-01

    Sandia National Laboratories (SNL) has traditionally used chlorinated and fluorinated organic solvents for general degreasing applications. Many of these solvents have been labeled by the Federal Government as ozone depleting chemicals and as toxic and/or suspected carcinogens. As a result, these solvents will no longer be recommended for use within the DOE weapons complex. There are three major classes of materials that are of concern for cleaning: organics, metals and ceramics. Each of these materials has its own special cleaning problems. Solvents that were used in the past, such as 1,1,1-trichloroethane (TCA) and trichloroethylene (TCE), were extremely efficient at removing everything from oils and greases to salts without leaving corrosive residues or permanently absorbing into the materials. These traditional degreasing solvents were essentially ``all-inone`` cleaners: quick, reliable, and easy to use. Unfortunately, a ``drop-in`` cleaner for such a wide variety of materials and contaminants will probably never be identified. So far, it has been difficult to identify environmentally conscious cleaners that clean as well as TCE and TCA. Most alternative cleaners require more volume to do the job, and also require longer exposure to get the job done. With these things in mind, we are hoping to identify and qualify new cleaners that will take care of general classes of materials.

  3. Vent means for closed air system impact-type seismic source

    SciTech Connect

    Airhart, T.P.

    1987-10-27

    This patent describes an apparatus for impacting a target comprising: (a) a hollow upstanding cylindrical housing having a closed upper end and open lower end and provided with a longitudinal bore; (b) a pressurized air supply vessel communicating with the bore through the first air passage; (c) piston means slidably interfitted with the bore for movement therein; (d) valve means for regulating air flow through the second air passage; (e) means for supporting the piston means in an upper most position in which piston means projects above and blocks the first air passage so as to isolate the air supply vessel from the bore and so as to engage the valve means in a manner to maintain the second air passage in an unblocked condition; (f) means for releasing the piston means such that the resultant gravity-induced movement is accompanied in sequence by disengagement with the valve means and unblocking of the first air passage; (g) means for returning the piston means to such upper most position.

  4. Vacuum Cleaner Fan Being Improved

    NASA Technical Reports Server (NTRS)

    Tweedt, Daniel L.

    1997-01-01

    As part of the technology utilization program at the NASA Lewis Research Center, efforts are underway to transfer aerospace technologies to new areas of practical application. One such effort involves using advanced computational fluid dynamics (CFD) codes for turbomachinery to analyze the internal fluid dynamics of low-speed fans and blowers. This year, the Kirby Company in Cleveland, Ohio, approached NASA with a request for technologies that could help them improve their vacuum cleaners. Of particular interest to Kirby is the high-frequency blade-passing noise generation of their vacuum cleaner fan at low airflow rates.

  5. Means of atmospheric air pollution reduction during drilling wells

    NASA Astrophysics Data System (ADS)

    Shkitsa, L.; Yatsyshyn, T.; Lyakh, M.; Sydorenko, O.

    2016-08-01

    The process of drilling oil and gas wells is the source of air pollution through drilling mud evaporation containing hazardous chemical substances. The constructive solution for cleaning device of downhole tool that contains elements covering tube and clean the surface from the mud in the process of rising from the well is offered. Inside the device is filled with magnetic fluid containing the substance neutralizing hazardous substances. The use of the equipment proposed will make it possible to avoid penetration of harmful substances into the environment and to escape the harmful effects of aggressive substances for staff health and increase rig's fire safety.

  6. Coping with Indoor Air Pollution

    MedlinePlus

    ... itself. Household chemical cleaners Use baking soda or vinegar and water as household cleaners. For a job ... after each use by using one-part white vinegar to three-parts water. Let the pieces air- ...

  7. SUBMERGED GRAVEL SCRUBBER DEMONSTRATION AS A PASSIVE AIR CLEANER FOR CONTAINMENT VENTING AND PURGING WITH SODIUM AEROSOLS -- CSTF TESTS AC7 - AC10

    SciTech Connect

    HILLIARD, R K.; MCCORMACK, J D.; POSTMA, A K.

    1981-11-01

    Four large-scale air cleaning tests (AC7 - AC10) were performed in the Containment Systems Test Facility (CS'lF) to demonstrate the performance of a Submerged Gravel Scrubber for cleaning the effluent gas from a vented and purged breeder reactor containment vessel. The test article, comprised of a Submerged Gravel Scrubber (SGS) followed by a high efficiency fiber demister, had a design gas flow rate of 0.47 m{sup 3}/s (1000 ft{sup 3}/min) at a pressure drop of 9.0 kPa (36 in. H{sub 2}O). The test aerosol was sodium oxide, sodium hydroxide, or sodium carbonate generated in the 850-m{sup 3} CSTF vessel by continuously spraying sodium into the air-filled vessel while adding steam or carbon dioxide. Approximately 4500 kg (10,000 lb) of sodium was sprayed over a total period of 100 h during the tests. The SGS/Demister system was shown to be highly efficient (removing ~99.98% of the entering sodium aerosol mass), had a high mass loading capacity, and operated in a passive manner, with no electrical requirement. Models for predicting aerosol capture, gas cooling, and pressure drop are developed and compared with experimental results.

  8. 7 CFR 2902.30 - Glass cleaners.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 15 2011-01-01 2011-01-01 false Glass cleaners. 2902.30 Section 2902.30 Agriculture... Glass cleaners. (a) Definition. Cleaning products designed specifically for use in cleaning glass... qualifying biobased glass cleaners. By that date, Federal agencies that have the responsibility for...

  9. 7 CFR 2902.30 - Glass cleaners.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Glass cleaners. 2902.30 Section 2902.30 Agriculture... Glass cleaners. (a) Definition. Cleaning products designed specifically for use in cleaning glass... qualifying biobased glass cleaners. By that date, Federal agencies that have the responsibility for...

  10. Robotic Water Blast Cleaner

    NASA Technical Reports Server (NTRS)

    Sharpe, M. H.; Roberts, M. L.; Hill, W. E.; Jackson, C. H.

    1983-01-01

    Water blasting system under development removes hard, dense, extraneous material from surfaces. High pressure pump forces water at supersonic speed through nozzle manipulated by robot. Impact of water blasts away unwanted material from workpiece rotated on air bearing turntable. Designed for removing thermal-protection material, system is adaptable to such industrial processes as cleaning iron or steel castings.

  11. Aging Effects of Environmentally-Friendly Cleaners on Adhesive Bond Integrity

    NASA Technical Reports Server (NTRS)

    Biegert, L. L.; Anderson, G. L.; Evans, K. B.; Olsen, B. D.; Weber, B. L.; McCool, A. A. (Technical Monitor)

    2000-01-01

    Because of the 1990 Clean Air Act Amendment many chlorinated solvents are being phased out of use in manufacturing industries. Replacement of the ODC (ozone- depleting chemicals) with less volatile, non-ozone depleting cleaners has been extensively studied over the past nine years at Thiokol Propulsion, Cordant Technologies. Many of the non-ODC cleaners contain compounds that can potentially degrade over time under conditions of high temperature, humidity and exposure to light. The chemical composition of environmentally conditioned cleaners and the subsequent effect on aluminum/amine-cured epoxy bond integrity as measured by Tapered Double Cantilever Beam were evaluated. From this study it is observed that moisture content increases for those cleaners containing polar compounds. Non-volatile residue content increases as stabilizers are depleted and the chemical compound limonene is oxidized. A change in aluminum/ amine-cured epoxy bond fracture toughness is observed as some of these cleaners age with increases in moisture and NVR content.

  12. Creating a Window Cleaner Company.

    ERIC Educational Resources Information Center

    Sarquis, A. M.; And Others

    1995-01-01

    Provides a description of a project used in the Cool Science and Technology Camps in which campers are presented with the challenge of developing and marketing their own brand of window cleaner. Topics such as chemistry, marketing, and cost analysis are intertwined as students prepare and plan their approach to product development. (DDR)

  13. REDUCING INK AND CLEANER WASTE

    EPA Science Inventory

    Changing from alcohol-based inks and cleaners can reduce the amount and toxicity of emissions and waste, while also improving product quality and saving money. his article explores how a flexographic printer successfully made the switch without incurring significant capital costs...

  14. Cleaner, More Efficient Diesel Engines

    SciTech Connect

    Musculus, Mark

    2013-08-13

    Mark Musculus, an engine combustion scientist at Sandia National Laboratories, led a study that outlines the science base for auto and engine manufacturers to build the next generation of cleaner, more efficient engines using low-temperature combustion. Here, Musculus discusses the work at Sandia's Combustion Research Facility.

  15. Cleaner, More Efficient Diesel Engines

    ScienceCinema

    Musculus, Mark

    2014-02-26

    Mark Musculus, an engine combustion scientist at Sandia National Laboratories, led a study that outlines the science base for auto and engine manufacturers to build the next generation of cleaner, more efficient engines using low-temperature combustion. Here, Musculus discusses the work at Sandia's Combustion Research Facility.

  16. Acoustic tooth cleaner

    NASA Technical Reports Server (NTRS)

    Heyman, J. S. (Inventor)

    1982-01-01

    An acoustic oral hygiene unit is described that uses acoustic energy to oscillate mild abrasive particles in a water suspension which is then directed in a low pressure stream onto the teeth. The oscillating abrasives scrub the teeth clean removing food particles, plaque, calculous, and other foreign material from tooth surfaces, interproximal areas, and tooth-gingiva interface more effectively than any previous technique. The relatively low power output and the basic design makes the invention safe and convenient for everyday use in the home without special training. This invention replaces all former means of home dental prophylaxis, and requires no augmentation to fulfill all requirements for daily oral hygienic care.

  17. IMPROVED TEST METHODS FOR ELECTRONIC AIR CLEANERS

    EPA Science Inventory

    The objective of this project was to develop a fractional filtration efficiency test protocol for residential electrostatic precipitators (ESPs) that avoids the limitations of the ASHRAE 52.2 method. Specifically, the objectives were to a) determine the change in efficiency that ...

  18. Sampling Biases in Datasets of Historical Mean Air Temperature over Land

    NASA Astrophysics Data System (ADS)

    Wang, K.

    2014-12-01

    Global mean surface air temperature have risen by 0.74 °C over the last 100 years. However, the definition of mean surface air temperature is still a subject of debate. The most defensible definition might be the integral of the continuous temperature measurements over a day (Td0). However, for technological and historical reasons, mean temperatures (Td1) over land have been taken to be the average of the daily maximum and minimum temperature measurements. All existing principle global temperature analyses over land are primarily based on Td1. Here, I make a first quantitative assessment of the bias in the use of Td1 to estimate trends of mean air temperature using hourly air temperature observations at 5600 globally distributed weather stations from the 1970s to 2013. I find that the use of Td1 has a negligible impact on the global mean warming rate. However, the trend of Td1 has a substantial bias at regional and local scales, with a root mean square error of over 25% at 5°×5° grids. Therefore, caution should be taken when using mean air temperature datasets based on Td1 to examine spatial patterns of global warming.

  19. CLEANER-Hydrologic Observatory Joint Science Plan

    NASA Astrophysics Data System (ADS)

    Welty, C.; Dressler, K.; Hooper, R.

    2005-12-01

    The CLEANER-Hydrologic Observatory* initiative is a distributed network for research on complex environmental systems that focuses on the intersecting water-related issues of both the CUAHSI and CLEANER communities. It emphasizes research on the nation's water resources related to human-dominated natural and built environments. The network will be comprised of: interacting field sites with an integrated cyberinfrastructure; a centralized technical resource staff and management infrastructure to support interdisciplinary research through data collection from advanced sensor systems, data mining and aggregation from multiple sources and databases; cyber-tools for analysis, visualization, and predictive multi-scale modeling that is dynamically driven. As such, the network will transform 21st century workforce development in the water-related intersection of environmental science and engineering, as well as enable substantial educational and engagement opportunities for all age levels. The scientific goal and strategic intent of the CLEANER-Hydrologic Observatory Network is to transform our understanding of the earth's water cycle and associated biogeochemical cycles across spatial and temporal scales-enabling quantitative forecasts of critical water-related processes, especially those that affect and are affected by human activities. This strategy will develop scientific and engineering tools that will enable more effective adaptive approaches for resource management. The need for the network is based on three critical deficiencies in current abilities to understand large-scale environmental processes and thereby develop more effective management strategies. First we lack basic data and the infrastructure to collect them at the needed resolution. Second, we lack the means to integrate data across scales from different media (paper records, electronic worksheets, web-based) and sources (observations, experiments, simulations). Third, we lack sufficiently accurate

  20. Calorimetric measurement of energy of ultrasonic cleaners

    SciTech Connect

    Harding, W.B.

    1994-11-01

    The development of a calorimeter that measured the power within an ultrasonic cleaning tank is presented. The principle involved is explained. Several types of calorimeter that were tested are described. Measurement of the power in an ultrasonic cleaner permits: (1) comparing different ultrasonic cleaners; (2) monitoring the performance of a specific cleaner; (3) measuring the distribution of power in a cleaning tank, and (4) evaluating the effects of process variables on the power.

  1. A helium freeze-out cleaner operating at atmospheric pressure

    NASA Astrophysics Data System (ADS)

    Dauvergne, J. P.; Delikaris, D.; Haug, F.; Knoops, S.

    A low pressure helium purification system has been designed at CERN. The helium gas recovered by means of a set of vacuum pumps from subatmospheric cryogenic circuits is cleaned at purity levels permitting direct re-liquefaction into the main cryo-plant cycle. The gas to be cleaned is close to ambient temperature and atmospheric pressure. It is cooled down to 33K by counterflow heat exchanger with the processed gas plus a small amount of cold helium gas derived from the main cryoplant. Impurities in the gas to be processed are condensed on the cold surfaces, and purification is secured by a filtering. The processed gas returns directly to the low pressure suction flow of the cryo-plant compressor. So far two freeze-out cleaners have been designed and built and are currently in operation at two independent cryo-plants with liquifaction capacities of approximately 3.5 g/s. The results obtained on purification performance and "lifetime" before subsequent regeneration of the device, pressure drop depending on impurity contents, cold gas requirements and heat exchanger performance compare well with theoretical predictions. Helium gas with impurity levels of up to close to 13000 ppm by weight have been treated. At 2300 ppm and a processed helium gas flow of 0.7 g/s life times of close to 24 hours could be obtained permitting the deposition of 135 g of solid air. Regeneration cycles with respect to life time are short (15 minutes).

  2. Wet/Dry Vacuum Cleaner

    NASA Technical Reports Server (NTRS)

    Reimers, Harold; Andampour, Jay; Kunitser, Craig; Thomas, Ike

    1995-01-01

    Vacuum cleaner collects and retains dust, wet debris, and liquids. Designed for housekeeping on Space Station Freedom, it functions equally well in normal Earth Gravity or in microgravity. Generates acoustic noise at comfortably low levels and includes circuitry that reduces electromagnetic interference to other electronic equipment. Draws materials into bag made of hydrophobic sheet with layers of hydrophilic super-absorbing pads at downstream end material. Hydrophilic material can gel many times its own weight of liquid. Blower also provides secondary airflow to cool its electronic components.

  3. 7 CFR 3201.30 - Glass cleaners.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 15 2014-01-01 2014-01-01 false Glass cleaners. 3201.30 Section 3201.30 Agriculture... Items § 3201.30 Glass cleaners. (a) Definition. Cleaning products designed specifically for use in cleaning glass surfaces, such as windows, mirrors, car windows, and computer monitors. (b) Minimum...

  4. 7 CFR 3201.30 - Glass cleaners.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 15 2012-01-01 2012-01-01 false Glass cleaners. 3201.30 Section 3201.30 Agriculture... Items § 3201.30 Glass cleaners. (a) Definition. Cleaning products designed specifically for use in cleaning glass surfaces, such as windows, mirrors, car windows, and computer monitors. (b) Minimum...

  5. 7 CFR 3201.30 - Glass cleaners.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 15 2013-01-01 2013-01-01 false Glass cleaners. 3201.30 Section 3201.30 Agriculture... Items § 3201.30 Glass cleaners. (a) Definition. Cleaning products designed specifically for use in cleaning glass surfaces, such as windows, mirrors, car windows, and computer monitors. (b) Minimum...

  6. 7 CFR 2902.49 - Industrial cleaners.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Industrial cleaners. 2902.49 Section 2902.49... Items § 2902.49 Industrial cleaners. (a) Definition. Products used to remove contaminants, such as... water in pressure washers, or in hand wiping applications in industrial or manufacturing settings,...

  7. 7 CFR 3201.49 - Industrial cleaners.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 15 2014-01-01 2014-01-01 false Industrial cleaners. 3201.49 Section 3201.49... Designated Items § 3201.49 Industrial cleaners. (a) Definition. Products used to remove contaminants, such as... water in pressure washers, or in hand wiping applications in industrial or manufacturing settings,...

  8. 7 CFR 2902.49 - Industrial cleaners.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 15 2011-01-01 2011-01-01 false Industrial cleaners. 2902.49 Section 2902.49... Items § 2902.49 Industrial cleaners. (a) Definition. Products used to remove contaminants, such as... water in pressure washers, or in hand wiping applications in industrial or manufacturing settings,...

  9. 7 CFR 3201.49 - Industrial cleaners.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 15 2012-01-01 2012-01-01 false Industrial cleaners. 3201.49 Section 3201.49... Designated Items § 3201.49 Industrial cleaners. (a) Definition. Products used to remove contaminants, such as... water in pressure washers, or in hand wiping applications in industrial or manufacturing settings,...

  10. 7 CFR 3201.49 - Industrial cleaners.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 15 2013-01-01 2013-01-01 false Industrial cleaners. 3201.49 Section 3201.49... Designated Items § 3201.49 Industrial cleaners. (a) Definition. Products used to remove contaminants, such as... water in pressure washers, or in hand wiping applications in industrial or manufacturing settings,...

  11. Chemical Aging of Environmentally Friendly Cleaners

    NASA Technical Reports Server (NTRS)

    Biegert, L. L.; Evans, K. B.; Olsen, B. D.; Weber, B. L.

    2001-01-01

    Use of cleaners in the manufacturing area demands bottles that will hold a sufficient amount of material and allow for easy and controlled dispensing by the operator without contamination or material leaching from the bottle. The manufacturing storage conditions are also a factor that may affect cleaner chemical integrity and its potential to leave a residue on the part. A variety of squeeze bottles stored in mild (72 F, 10% R.H., dark) and harsh (105 F, 50% R.H., fluorescent lighting) conditions were evaluated to determine the effect of environment and bottle exposure on ozone depleting chemicals (ODC) cleaners chemical composition. Low Density Polyethylene (LDPE) bottles were found to be quite permeable to all the cleaners evaluated in this study indicating this bottle type should not be used in the manufacturing area. Fluorinated Polyethylene (FLPE) bottles showed little cleaner loss and change in cleaner chemical composition over time suggesting these bottles would be acceptable for use. Chemical analysis indicates limonene containing cleaners show increased non-volatile residue (NVR) content with storage under harsh conditions. Some cleaners use BHT (butylated hydroxytoluene) as stabilizer and to protect against limonene oxidation. Under harsh conditions, BHT was quickly depleted resulting in higher NVR levels.

  12. 7 CFR 2902.50 - Multipurpose cleaners.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Multipurpose cleaners. 2902.50 Section 2902.50 Agriculture Regulations of the Department of Agriculture (Continued) OFFICE OF ENERGY POLICY AND NEW USES... Items § 2902.50 Multipurpose cleaners. (a) Definition. Products used to clean dirt, grease, and...

  13. 7 CFR 2902.45 - Food cleaners.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Food cleaners. 2902.45 Section 2902.45 Agriculture Regulations of the Department of Agriculture (Continued) OFFICE OF ENERGY POLICY AND NEW USES, DEPARTMENT OF... Food cleaners. (a) Definition. Anti-microbial products designed to clean the outer layer of...

  14. 7 CFR 2902.50 - Multipurpose cleaners.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 15 2011-01-01 2011-01-01 false Multipurpose cleaners. 2902.50 Section 2902.50 Agriculture Regulations of the Department of Agriculture (Continued) OFFICE OF ENERGY POLICY AND NEW USES... Items § 2902.50 Multipurpose cleaners. (a) Definition. Products used to clean dirt, grease, and...

  15. 7 CFR 2902.45 - Food cleaners.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 15 2011-01-01 2011-01-01 false Food cleaners. 2902.45 Section 2902.45 Agriculture Regulations of the Department of Agriculture (Continued) OFFICE OF ENERGY POLICY AND NEW USES, DEPARTMENT OF... Food cleaners. (a) Definition. Anti-microbial products designed to clean the outer layer of...

  16. GUIDE TO CLEANER TECHNOLOGIES: ALTERNATIVE METAL FINISHES

    EPA Science Inventory

    A cleaner technology is a source reduction or recycle method applied to eliminate or significantly reduce the amount of any hazardous substance, pollutant, or contaminant released to the environment. The emphasis of cleaner technologies is on process changes that can prevent poll...

  17. Performance of a Pin Cylinder Lint Cleaner

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Saw-type lint cleaners are efficient cleaners, but their aggressive nature also causes more fiber damage and wastage. As the U. S. cotton market shifts to overseas where customers are interested in longer fiber with fewer neps and fiber damage, there was a renewed interest to re-evaluate the perfor...

  18. Multibar sawless lint cleaner: Field testing results

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The Multibar Sawless Lint Cleaner (MBSLC) is a prototype spiked-tooth lint cleaner initially designed to replace the first stage lint cleaning in a cotton gin. Previous studies conducted in the ginning laboratory in Lubbock, Texas, demonstrated improvements in some fiber properties, as well as minim...

  19. 7 CFR 3201.45 - Food cleaners.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 15 2014-01-01 2014-01-01 false Food cleaners. 3201.45 Section 3201.45 Agriculture... Items § 3201.45 Food cleaners. (a) Definition. Anti-microbial products designed to clean the outer layer of various food products, such as fruit, vegetables, and meats. (b) Minimum biobased content....

  20. 7 CFR 3201.45 - Food cleaners.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 15 2012-01-01 2012-01-01 false Food cleaners. 3201.45 Section 3201.45 Agriculture... Items § 3201.45 Food cleaners. (a) Definition. Anti-microbial products designed to clean the outer layer of various food products, such as fruit, vegetables, and meats. (b) Minimum biobased content....

  1. 7 CFR 3201.45 - Food cleaners.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 15 2013-01-01 2013-01-01 false Food cleaners. 3201.45 Section 3201.45 Agriculture... Items § 3201.45 Food cleaners. (a) Definition. Anti-microbial products designed to clean the outer layer of various food products, such as fruit, vegetables, and meats. (b) Minimum biobased content....

  2. Typical household vacuum cleaners: the collection efficiency and emissions characteristics for fine particles.

    PubMed

    Lioy, P J; Wainman, T; Zhang, J; Goldsmith, S

    1999-02-01

    The issue of fine particle (PM2.5) exposures and their potential health effects is a focus of scientific research because of the recently promulgated National Ambient Air Quality Standard for PM2.5. Before final implementation, the health and exposure basis for the standard will be reviewed by the U.S. Environmental Protection Agency within the next five years. As part of this process, it is necessary to understand total particle exposure issues and to determine the relative importance of the origin of PM2.5 exposure in various micro-environments. The results presented in this study examine emissions of fine particles from a previously uncharacterized indoor source: the residential vacuum cleaner. Eleven standard vacuum cleaners were tested for the emission rate of fine particles by their individual motors and for their efficiency in collecting laboratory-generated fine particles. An aerosol generator was used to introduce fine potassium chloride (KCl) particles into the vacuum cleaner inlet for the collection efficiency tests. Measurements of the motor emissions, which include carbon, and the KCl aerosol were made using a continuous HIAC/Royco 5130 A light-scattering particle detector. All tests were conducted in a metal chamber specifically designed to completely contain the vacuum cleaner and operate it in a stationary position. For the tested vacuum cleaners, fine particle motor emissions ranged from 9.6 x 10(4) to 3.34 x 10(8) particles/min, which were estimated to be 0.028 to 176 micrograms/min for mass emissions, respectively. The vast majority of particles released were in the range of 0.3-0.5 micron in diameter. The lowest particle emission rate was obtained for a vacuum cleaner that had a high efficiency (HEPA) filter placed after the vacuum cleaner bag and the motor within a sealed exhaust system. This vacuum cleaner removed the KCl particles that escaped the vacuum cleaner bag and the particles emitted by the motor. Results obtained for the KCl

  3. Quantifying the effects of mixing and residual circulation on trends of stratospheric mean age of air

    NASA Astrophysics Data System (ADS)

    Ploeger, Felix; Abalos, Marta; Birner, Thomas; Konopka, Paul; Legras, Bernard; Müller, Rolf; Riese, Martin

    2015-04-01

    Trends in stratospheric mean age of air are driven both by changes in the (slow, large scale) residual mean mass circulation and by changes in (fast, locally acting) eddy mixing. However, to what degree both effects affect mean age trends is an open question. Here, we present a method that allows the effects of mixing and residual circulation on trends of mean age of air to be quantified. This method is based on mean age simulations with the Lagrangian chemistry transport model CLaMS driven by ERA-Interim reanalysis, and on the mean age tracer continuity equation integrated along the residual circulation. CLaMS simulated climatological mean age in the lower stratosphere shows reliable agreement with balloon borne in-situ obsevations and with satellite observations by MIPAS (Michelson Interferometer for Passive Atmospheric Sounding). During 1990--2013, CLaMS simulated mean age decreases throughout most of the stratosphere, qualitatively consistent with results based on climate model simulations (e.g., Butchart et al., 2010). Remarkably, in the Northern hemisphere subtropics and mid-latitudes above about 24km CLaMS mean age trends are insignificant, consistent with published mean age trends from in-situ observations (Engel et al., 2009). Furthermore, during 2002--2012 CLaMS mean age changes show a clear hemispheric asymmetry in agreement with MIPAS satellite observations (Stiller et al., 2012; Ploeger et al., 2014) and HCl decadal changes (Mahieu et al., 2014). We find that changes in the transit time along the residual circulation alone cannot explain the mean age trends, and including the effect of mixing integrated along the air parcel history is essential. Therefore, differences in mean age trends between models or between models and observations are likely related to differences in the integrated effect of mixing on mean age of air. Above about 550K, trends in the integrated mixing effect appear to be likely coupled to residual circulation changes. References

  4. Estimation of daily mean air temperature from satellite derived radiometric data

    NASA Technical Reports Server (NTRS)

    Phinney, D.

    1976-01-01

    The Screwworm Eradication Data System (SEDS) at JSC utilizes satellite derived estimates of daily mean air temperature (DMAT) to monitor the effect of temperature on screwworm populations. The performance of the SEDS screwworm growth potential predictions depends in large part upon the accuracy of the DMAT estimates.

  5. Enzymes Enhance Biofilm Removal Efficiency of Cleaners

    PubMed Central

    Stiefel, Philipp; Mauerhofer, Stefan; Schneider, Jana; Maniura-Weber, Katharina; Rosenberg, Urs

    2016-01-01

    Efficient removal of biofilms from medical devices is a big challenge in health care to avoid hospital-acquired infections, especially from delicate devices like flexible endoscopes, which cannot be reprocessed using harsh chemicals or high temperatures. Therefore, milder solutions such as enzymatic cleaners have to be used, which need to be carefully developed to ensure efficacious performance. In vitro biofilm in a 96-well-plate system was used to select and optimize the formulation of novel enzymatic cleaners. Removal of the biofilm was quantified by crystal violet staining, while the disinfecting properties were evaluated by a BacTiter-Glo assay. The biofilm removal efficacy of the selected cleaner was further tested by using European standard (EN) for endoscope cleaning EN ISO 15883, and removal of artificial blood soil was investigated by treating TOSI (Test Object Surgical Instrument) cleaning indicators. Using the process described here, a novel enzymatic endoscope cleaner was developed, which removed 95% of Staphylococcus aureus and 90% of Pseudomonas aeruginosa biofilms in the 96-well plate system. With a >99% reduction of CFU and a >90% reduction of extracellular polymeric substances, this cleaner enabled subsequent complete disinfection and fulfilled acceptance criteria of EN ISO 15883. Furthermore, it efficiently removed blood soil and significantly outperformed comparable commercial products. The cleaning performance was stable even after storage of the cleaner for 6 months. It was demonstrated that incorporation of appropriate enzymes into the cleaner enhanced performance significantly. PMID:27044552

  6. Chemical Aging of Environmentally Friendly Cleaners

    NASA Technical Reports Server (NTRS)

    Evans, K.; Biegert, L.; Olsen, B.; Weber, B.; McCool, Alex (Technical Monitor)

    2001-01-01

    Use of cleaners in the manufacturing area demands bottles that will hold a sufficient amount of material and allow for easy and controlled dispensing by the operator without contamination or material leaching from the bottle. The manufacturing storage conditions are also a factor that may affect cleaner chemical integrity and its potential to leave a residue on the part. A variety of squeeze bottles stored in mild (72 F, 10 % R.H., dark) and harsh (105 F, 50 % R.H., fluorescent lighting) conditions were evaluated to determine the effect of environment and bottle exposure on the chemical composition of TCA (1,1,1 trichloroethane) replacement solvents. Low Density Polyethylene (LDPE) bottles were found to be quite permeable to all the cleaners evaluated in this study indicating this bottle type should not be used in the manufacturing area. Fluorinated Polyethylene (FLPE) bottles showed little cleaner loss and change in cleaner chemical composition over time suggesting these bottles would be acceptable for use. Chemical analysis indicates limonene-containing cleaners show increased non-volatile residue (NVR) content with storage under harsh conditions. Some cleaners use BHT (butylated hydroxytoluene) as stabilizer and to protect against limonene oxidation. Under harsh conditions, BHT was quickly depleted resulting in higher NVR levels.

  7. Enzymes Enhance Biofilm Removal Efficiency of Cleaners.

    PubMed

    Stiefel, Philipp; Mauerhofer, Stefan; Schneider, Jana; Maniura-Weber, Katharina; Rosenberg, Urs; Ren, Qun

    2016-06-01

    Efficient removal of biofilms from medical devices is a big challenge in health care to avoid hospital-acquired infections, especially from delicate devices like flexible endoscopes, which cannot be reprocessed using harsh chemicals or high temperatures. Therefore, milder solutions such as enzymatic cleaners have to be used, which need to be carefully developed to ensure efficacious performance. In vitro biofilm in a 96-well-plate system was used to select and optimize the formulation of novel enzymatic cleaners. Removal of the biofilm was quantified by crystal violet staining, while the disinfecting properties were evaluated by a BacTiter-Glo assay. The biofilm removal efficacy of the selected cleaner was further tested by using European standard (EN) for endoscope cleaning EN ISO 15883, and removal of artificial blood soil was investigated by treating TOSI (Test Object Surgical Instrument) cleaning indicators. Using the process described here, a novel enzymatic endoscope cleaner was developed, which removed 95% of Staphylococcus aureus and 90% of Pseudomonas aeruginosa biofilms in the 96-well plate system. With a >99% reduction of CFU and a >90% reduction of extracellular polymeric substances, this cleaner enabled subsequent complete disinfection and fulfilled acceptance criteria of EN ISO 15883. Furthermore, it efficiently removed blood soil and significantly outperformed comparable commercial products. The cleaning performance was stable even after storage of the cleaner for 6 months. It was demonstrated that incorporation of appropriate enzymes into the cleaner enhanced performance significantly. PMID:27044552

  8. 7 CFR 58.230 - Heavy duty vacuum cleaners.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 3 2014-01-01 2014-01-01 false Heavy duty vacuum cleaners. 58.230 Section 58.230....230 Heavy duty vacuum cleaners. Each plant handling dry milk products shall be equipped with a heavy duty industrial vacuum cleaner. The vacuum cleaner shall be of a type that has a collector...

  9. 7 CFR 58.230 - Heavy duty vacuum cleaners.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Heavy duty vacuum cleaners. 58.230 Section 58.230....230 Heavy duty vacuum cleaners. Each plant handling dry milk products shall be equipped with a heavy duty industrial vacuum cleaner. The vacuum cleaner shall be of a type that has a collector...

  10. 7 CFR 58.230 - Heavy duty vacuum cleaners.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 3 2012-01-01 2012-01-01 false Heavy duty vacuum cleaners. 58.230 Section 58.230....230 Heavy duty vacuum cleaners. Each plant handling dry milk products shall be equipped with a heavy duty industrial vacuum cleaner. The vacuum cleaner shall be of a type that has a collector...

  11. 7 CFR 58.230 - Heavy duty vacuum cleaners.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Heavy duty vacuum cleaners. 58.230 Section 58.230....230 Heavy duty vacuum cleaners. Each plant handling dry milk products shall be equipped with a heavy duty industrial vacuum cleaner. The vacuum cleaner shall be of a type that has a collector...

  12. 7 CFR 58.230 - Heavy duty vacuum cleaners.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false Heavy duty vacuum cleaners. 58.230 Section 58.230....230 Heavy duty vacuum cleaners. Each plant handling dry milk products shall be equipped with a heavy duty industrial vacuum cleaner. The vacuum cleaner shall be of a type that has a collector...

  13. Reduction of Microbial Aerosols by Automatic Toilet Bowl Cleaners.

    ERIC Educational Resources Information Center

    Yahya, Moyasar; And Others

    1992-01-01

    A study of the impact of automatic toilet bowl cleaners on aerosol generation. Three toilet bowl cleaners containing 2.5, 6.7 or 18.2 percent surfactant materials were evaluated. Results indicate these cleaners significantly (p 0.05) reduce bacteria ejected from the bowl, and the cleaner containing the greatest amount of surfactant was the most…

  14. Observed Temporal Evolution of Global Mean Age of Stratospheric Air for the 2002 to 2010 Period

    NASA Astrophysics Data System (ADS)

    Stiller, G. P.; von Clarmann, T.; Haenel, F.; Funke, B.; Glatthor, N.; Grabowski, U.; Kellmann, S.; Kiefer, M.; Linden, A.; Lossow, S.; Lopez-Puertas, M.

    2011-12-01

    According to model calculations, the meridional circulation is expected to intensify as a result of climate change, and mean age of stratospheric air is expected to decrease. However, an observational data set presented recently (Engel et al., 2009) and consisting of 27 balloon samples of the age of air tracers carbon dioxide and sulfur hexafluoride covering the years 1975 to 2005 did not confirm the model predictions. As a contribution to the ongoing discussion, an extensive observational data set, consisting of more than 1 Million SF6 vertical profiles distributed globally is presented here. It has been derived from the MIPAS instrument covering the period 2002 to 2010 and has been converted into mean age of stratospheric air by referring to a combined data set of in-situ and flask global mean tropospheric SF6 measurements provided by NOAA/ESRL. During conversion into age of air, the non-linearity of tropospheric SF6 increase has been corrected for by convolution with the age spectrum within an iterative approach. Monthly zonal means of mean age of air, binned at 10 deg latitude and 1-2 km altitude, were analyzed with respect to their temporal variation by fitting a regression model consisting of a constant and a linear increase term, 2 proxies for the QBO variation, sinusoidal terms for the seasonal and semi-annual variation and overtones for the correction of the shapes to the observed data set. The impact of subsidence of mesospheric SF6-depleted air and in-mixing into non-polar latitudes on mid-latitudinal absolute age of air and the age-of-air linear increase was assessed and found to be small. The linear increase of mean age of stratospheric air was found to be positive and partly larger than the trend derived by Engel et al. (2009) for most of the Northern mid-latitudes, the middle stratosphere in the tropics, and parts of the Southern mid-latitudes, as well as for the Southern polar upper stratosphere. Multi-year decrease of age of air was found for the

  15. GUIDE TO CLEANER TECHNOLOGIES: ORGANIC COATING REMOVAL

    EPA Science Inventory

    A cleaner technology is a source reduction or recycle method |applied to eliminate or significantly reduce hazardous waste generation. Source reduction includes product changes and source control. Source control can be further characterized as input material changes, technology...

  16. Update on asthma and cleaners

    PubMed Central

    Zock, Jan-Paul; Vizcaya, David; Le Moual, Nicole

    2010-01-01

    Purpose of review This paper summarises the recent literature on the relation between cleaning exposures and respiratory health, in particular asthma, including reviews, epidemiological surveys, surveillance programmes and exposure studies. The authors also aimed to identify gaps in the current knowledge and to recommend future research on the topic. Recent findings A large international general population study showed an increased risk of new-onset asthma associated with cleaning work, with professional use of cleaning products, and with domestic use of cleaning sprays. Three surveillance studies confirm the recognition of occupational asthma cases among cleaners and among others who use cleaning products at work. Six workforce-based studies show that respiratory symptoms are partly work-related, and are associated with certain specific exposures including sprays, chlorine bleach and other disinfectants. Summary Recent studies have strengthened the evidence of asthma and other adverse respiratory effects in cleaning workers. Similar effects were seen in other settings where cleaning products are used such as healthcare professionals and homemakers. Both new-onset asthma and work-exacerbated asthma due to cleaning exposures may play a role. Exposure to cleaning sprays, chlorine bleach and other disinfectants may be particularly relevant. The predominant effect mechanisms remain largely unclear and may include both specific sensitisation and irritant-related features. PMID:20093933

  17. Spectral sensitivity, spatial resolution and temporal resolution and their implications for conspecific signalling in cleaner shrimp.

    PubMed

    Caves, Eleanor M; Frank, Tamara M; Johnsen, Sönke

    2016-02-01

    Cleaner shrimp (Decapoda) regularly interact with conspecifics and client reef fish, both of which appear colourful and finely patterned to human observers. However, whether cleaner shrimp can perceive the colour patterns of conspecifics and clients is unknown, because cleaner shrimp visual capabilities are unstudied. We quantified spectral sensitivity and temporal resolution using electroretinography (ERG), and spatial resolution using both morphological (inter-ommatidial angle) and behavioural (optomotor) methods in three cleaner shrimp species: Lysmata amboinensis, Ancylomenes pedersoni and Urocaridella antonbruunii. In all three species, we found strong evidence for only a single spectral sensitivity peak of (mean ± s.e.m.) 518 ± 5, 518 ± 2 and 533 ± 3 nm, respectively. Temporal resolution in dark-adapted eyes was 39 ± 1.3, 36 ± 0.6 and 34 ± 1.3 Hz. Spatial resolution was 9.9 ± 0.3, 8.3 ± 0.1 and 11 ± 0.5 deg, respectively, which is low compared with other compound eyes of similar size. Assuming monochromacy, we present approximations of cleaner shrimp perception of both conspecifics and clients, and show that cleaner shrimp visual capabilities are sufficient to detect the outlines of large stimuli, but not to detect the colour patterns of conspecifics or clients, even over short distances. Thus, conspecific viewers have probably not played a role in the evolution of cleaner shrimp appearance; rather, further studies should investigate whether cleaner shrimp colour patterns have evolved to be viewed by client reef fish, many of which possess tri- and tetra-chromatic colour vision and relatively high spatial acuity. PMID:26747903

  18. Arginine vasotocin reduces levels of cooperative behaviour in a cleaner fish.

    PubMed

    Cardoso, Sónia C; Paitio, José R; Oliveira, Rui F; Bshary, Redouan; Soares, Marta C

    2015-02-01

    Cooperation between unrelated individuals usually involves investments that often mean a decrease in immediate payoffs, but ensure future benefits. Here we investigated the potential role of the neuropeptides Arginine-vasotocin (AVT) and Isotocin (IT) as proximate agents affecting individuals' cooperative levels in the Indo-pacific bluestreak cleaner wrasse Labroides dimidiatus. Their 'client' reef fish partners only benefit from interacting if cleaners eat ectoparasites and refrain from gleaning preferred client mucus. Thus, cleaners must control their impulse to eat according to their preference, and eat less preferred items to maintain ongoing interactions and avoid clients' leaving or punishing. We found that solely the experimental transient higher dosage of AVT led to a decrease of cleaners' willingness to feed against their preference, while IT and AVT antagonists had no significant effects. The sole effect of AVT on cleaner's performance may imply a link between AVT's influence and a potential activation of a stress response. Our results confirm the importance of the AVT/AVP system as an agent affecting levels of cooperation, offering a potential mechanistic pathway for the reported flexible service quality that cleaners provide their clients. PMID:25449412

  19. Diesel engine dual path exhaust cleaner and burner system

    SciTech Connect

    Stark, T.L.

    1983-02-15

    A dual filter element exhaust cleaner and burner system for diesel engines provides for the trapping of particulates in the engine exhaust gases by their passage through filter elements, as selectively controlled by means of a four-way valve. Collected particulates in a non-active particulate filter element are incinerated by means of a heater, with this filter element, during incineration, being supplied with exhaust gases through a constant flow exhaust gas regulator whereby incineration of the particulates will occur at a controlled rate independent of engine speed.

  20. Sampling Biases in Datasets of Historical Mean Air Temperature over Land

    NASA Astrophysics Data System (ADS)

    Wang, Kaicun

    2014-04-01

    Global mean surface air temperature (Ta) has been reported to have risen by 0.74°C over the last 100 years. However, the definition of mean Ta is still a subject of debate. The most defensible definition might be the integral of the continuous temperature measurements over a day (Td0). However, for technological and historical reasons, mean Ta over land have been taken to be the average of the daily maximum and minimum temperature measurements (Td1). All existing principal global temperature analyses over land rely heavily on Td1. Here, I make a first quantitative assessment of the bias in the use of Td1 to estimate trends of mean Ta using hourly Ta observations at 5600 globally distributed weather stations from the 1970s to 2013. I find that the use of Td1 has a negligible impact on the global mean warming rate. However, the trend of Td1 has a substantial bias at regional and local scales, with a root mean square error of over 25% at 5° × 5° grids. Therefore, caution should be taken when using mean Ta datasets based on Td1 to examine high resolution details of warming trends.

  1. Sampling biases in datasets of historical mean air temperature over land.

    PubMed

    Wang, Kaicun

    2014-01-01

    Global mean surface air temperature (Ta) has been reported to have risen by 0.74°C over the last 100 years. However, the definition of mean Ta is still a subject of debate. The most defensible definition might be the integral of the continuous temperature measurements over a day (Td0). However, for technological and historical reasons, mean Ta over land have been taken to be the average of the daily maximum and minimum temperature measurements (Td1). All existing principal global temperature analyses over land rely heavily on Td1. Here, I make a first quantitative assessment of the bias in the use of Td1 to estimate trends of mean Ta using hourly Ta observations at 5600 globally distributed weather stations from the 1970s to 2013. I find that the use of Td1 has a negligible impact on the global mean warming rate. However, the trend of Td1 has a substantial bias at regional and local scales, with a root mean square error of over 25% at 5° × 5° grids. Therefore, caution should be taken when using mean Ta datasets based on Td1 to examine high resolution details of warming trends. PMID:24717688

  2. Substitutes for ozone depleting aerosol electrical contact cleaners and cleaner/lubricants. Technical report

    SciTech Connect

    Bevilacqua, P.; Clark, K.G.

    1996-01-24

    With the production of Class I Ozone Depleting Substances discontinued as of January 1996, it became necessary to identify suitable replacements for chlorofluorocarbon (CFC-113) and trichloroethane (TCA) based electrical contact cleaners and cleaner/lubricant products. Two hydrochlorofluorocarbon (HCFC-141b) blends were identified as substitutes and recommended for interim use.

  3. Bronchial hyperresponsiveness in women cooks and cleaners.

    PubMed

    Karadzinska-Bislimovska, Jovanka; Minov, Jordan; Risteska-Kuc, Snezana; Stoleski, Saso; Mijakoski, Dragan

    2007-06-01

    The aim of this cross-sectional study was to assess the prevalence and characteristics of bronchial hyperresponsiveness (BHR) in 43 women cleaners (aged 26 to 57) and 37 women cooks (aged 29 to 55) and compare them with 45 controls (women office workers aged 27 to 58). The evaluation of all subjects included a questionnaire, skin prick tests to common aeroallergens, spirometry, and histamine challenge (PC20 < or = 8 mg mL(-1)). We found higher BHR prevalence in cleaners and cooks than in office workers (30.2 % and 29.7 %, vs. 17.7 %, respectively), but statistical significance was not reached. The prevalence of mild and moderate to severe BHR was similar in all groups. Borderline BHR prevalence was significantly higher in cleaners than in controls (16.2 % vs. 6.6 %, P=0.032) whereas the difference was on the verge of significance in cooks (13.5 % vs. 6.6 %, P=0.081). Moderate to severe BHR was strongly associated with positive family history of asthma and atopy in all groups. Mild BHR was significantly associated with daily smoking in cleaners (P=0.031) and cooks (P=0.021), as well as with the duration of exposure in cleaners (P=0.038). Borderline BHR was closely related to daily smoking and duration of exposure in both cleaners and cooks. Our findings indicate an important role of workplace exposure in borderline BHR development, as well as the significant effect of smoking on mild BHR development in women cleaners and cooks. PMID:17562606

  4. Observed temporal evolution of global mean age of stratospheric air for the 2002 to 2010 period

    NASA Astrophysics Data System (ADS)

    Stiller, G. P.; von Clarmann, T.; Haenel, F.; Funke, B.; Glatthor, N.; Grabowski, U.; Kellmann, S.; Kiefer, M.; Linden, A.; Lossow, S.; López-Puertas, M.

    2012-04-01

    An extensive observational data set from MIPAS measurements, consisting of more than one million SF6 vertical profiles distributed globally has been condensed into monthly zonal means of mean age of air for the period September 2002 to January 2010, binned at 10° latitude and 1-2 km altitude. The data were analysed with respect to their temporal variation by fitting a regression model consisting of: a constant and a linear increase term, 2 proxies for the QBO variation, sinusoidal terms for the seasonal and semi-annual variation and overtones for the correction of the shapes to the observed data set. The impact of subsidence of mesospheric SF6-depleted air and in-mixing into non-polar latitudes on mid-latitudinal age of air and its linear increase was assessed and found to be small. The linear increase of mean age of stratospheric air was found to be positive and partly larger than the trend derived by Engel et al. (2009) for most of the Northern mid-latitudes, the middle stratosphere in the tropics, and parts of the Southern mid-latitudes, as well as for the Southern polar upper stratosphere. Multi-year decrease of age of air was found for the lowermost and the upper stratospheric tropics, for parts of Southern mid-latitudes, and for the Northern polar regions. Analyses of the amplitudes and phases of the seasonal variation shed light on the coupling between different stratospheric regions. In particular, the Northern mid-latitude stratosphere is well coupled to the tropics, while the Northern lowermost mid-latitudinal stratosphere is decoupled, confirming the separation of the shallow branch of the Brewer-Dobson circulation from the deep branch. We suggest an overall increased tropical upwelling, together with a weakening of mixing barriers, especially in the Northern hemisphere, as possible explanations for the observed patterns. Reference: Engel, A., Möbius, T., Bönisch, H., Schmidt, U., Heinz, R., Levin, I., Atlas, E., Aoki, S., Nakazawa, T., Sugawara, S

  5. ASBESTOS FIBER RELEASE DURING CHANGE-OUT OF FILTER BAGS FROM HEPA-FILTERED VACUUM CLEANERS

    EPA Science Inventory

    High efficiency particulate air (HEPA) filtered vacuum cleaners are the primary tool used to clean up asbestos containing material during operations and maintenance (O&M) activities. he change-out of vacuum bags is a potential source of airborne asbestos contamination. n 1989 and...

  6. POTENTIAL INHALATION EXPOSURE TO VOLATILE CHEMICALS IN WATER-BASED HARD-SURFACE CLEANERS

    EPA Science Inventory

    Potential inhalation exposure of building occupants to volatile chemicals in water-based hard-surface cleaners was evaluated by analyzing 267 material safety data sheets (MSDSs). Among the 154 chemicals reported, 44 are volatile or semi-volatile. Hazardous air pollutants (HAPs) r...

  7. Cleaner production: Minimizing hazardous waste in Indonesia

    SciTech Connect

    Bratasida, D.L.

    1996-12-31

    In the second long-term development plan, industry plays a significant role in economic growth. In Indonesia, industries grow very fast; such fast growth can adversely effect the environment. Exploitation of assets can mean depletion of natural resources and energy, which, if incorrectly managed, can endanger human life and the environment. The inefficient use of natural resources will accelerate their exhaustion and generate pollution, resulting in environmental damage and threats to economic development and human well being. In recent years, changes in the approach used to control pollution have been necessary because of the increasing seriousness of the problems. Initial environmental management strategies were based on a carrying capacity approach; the natural assimilative capacity accommodated the pollution load that was applied. The environmental management strategies adopted later included technologies applied to the end of the discharge point (so-called {open_quotes}end-of-pipe{close_quotes} treatments). Until now, environmental management strategies focused on end-of-pipe approaches that control pollutants after they are generated. These approaches concentrate on waste treatment and disposal to control pollution and environmental degradation. However, as industry develops, waste volumes continue to increase, thereby creating further environmental problems. In addition, the wastes produced tend to have more complex characteristics and are potentially more difficult to treat for a reasonable cost. There are often technical and financial obstacles to regulatory compliance if waste treatment is relied on as the only means of achieving environmental objectives. Consequently, the reactive end-of-pipe treatment approach has been changed to a proactive cleaner production approach. This approach is based on the concept of sustainable development and is designed to prevent pollution as well as to protect natural resources and the quality of the environment.

  8. Localization of an air target by means of GNSS-based multistatic radar

    NASA Astrophysics Data System (ADS)

    Akhmedov, Daulet Sh.; Raskaliyev, Almat S.

    2016-08-01

    The possibility of utilizing transmitters of opportunity for target detection, tracking and positioning is of great interest to the radar community. In particular the optional use of Global Navigation Satellite System (GNSS) has lately triggered scientific research that has purpose to take advantage of this source of signal generation for passive radar. Number of studies have been conducted previously on development of GNSS-based bistatic and multistatic radars for detection and range estimation to the object located in the close atmosphere. To further enrich research in this area, we present a novel method for coordinate determination of the air target by means of the GNSS-based multistatic radar.

  9. What is an effective portable air cleaning device? A review.

    PubMed

    Shaughnessy, R J; Sextro, R G

    2006-04-01

    The use of portable air cleaning devices in residential settings has been steadily growing over the last 10 years. Three out of every 10 households now contain a portable air cleaning device. This increased use of air cleaners is accompanied by, if not influenced by, a fundamental belief by consumers that the air cleaners are providing an improved indoor air environment. However, there is a wide variation in the performance of air cleaners that is dependent on the specific air cleaner design and various indoor factors. The most widely used method in the United States to assess the performance of new air cleaners is the procedure described in the American National Standards Institute (ANSI)/Association of Home Appliance Manufacturers (AHAM) AC-1-2002. This method describes both the test conditions and the testing protocol. The protocol yields a performance metric that is based on the measured decay rate of contaminant concentrations with the air cleaner operating compared with the measured decay rate with the air cleaner turned off. The resulting metric, the clean air delivery rate (CADR), permits both an intercomparison of performance among various air cleaners and a comparison of air cleaner operation to other contaminant removal processes. In this article, we comment on the testing process, discuss its applicability to various contaminants, and evaluate the resulting performance metrics for effective air cleaning. PMID:16531290

  10. Meaning

    NASA Astrophysics Data System (ADS)

    Harteveld, Casper

    The second world to be considered concerns Meaning. In contrast to Reality and Play, this world relates to the people, disciplines, and domains that are focused on creating a certain value. For example, if this value is about providing students knowledge about physics, it involves teachers, the learning sciences, and the domains education and physics. This level goes into the aspects and criteria that designers need to take into account from this perspective. The first aspect seems obvious when we talk of “games with a serious purpose.” They have a purpose and this needs to be elaborated on, for example in terms of what “learning objectives” it attempts to achieve. The subsequent aspect is not about what is being pursued but how. To attain a value, designers have to think about a strategy that they employ. In my case this concerned looking at the learning paradigms that have come into existence in the past century and see what they have to tell us about learning. This way, their principles can be translated into a game environment. This translation involves making the strategy concrete. Or, in other words, operationalizing the plan. This is the third aspect. In this level, I will further specifically explain how I derived requirements from each of the learning paradigms, like reflection and exploration, and how they can possibly be related to games. The fourth and final aspect is the context in which the game is going to be used. It matters who uses the game and when, where, and how the game is going to be used. When designers have looked at these aspects, they have developed a “value proposal” and the worth of it may be judged by criteria, like motivation, relevance, and transfer. But before I get to this, I first go into how we human beings are meaning creators and what role assumptions, knowledge, and ambiguity have in this. I will illustrate this with some silly jokes about doctors and Mickey Mouse, and with an illusion.

  11. 21 CFR 872.3530 - Mechanical denture cleaner.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Mechanical denture cleaner. 872.3530 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3530 Mechanical denture cleaner. (a) Identification. A mechanical denture cleaner is a device, usually AC-powered, that consists of a container...

  12. Effect of Seed Cotton Cleaner Speeds on Machine Performance

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Past research has shown that increasing seed cotton cleaner speeds can improve cleaning efficiency. Advances in process control may make cleaner speed control feasible; however, an improved understanding of seed cotton cleaner performance at higher operating speeds is needed. The objectives of this ...

  13. Lint Cleaning Performance of a Modified Cylinder Cleaner

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The objectives of the experiments were to evaluate the lint cleaning performance of a modified cylinder cleaner with sharp cleaning-edge grid bars and compare the performance of one cylinder cleaner to two cylinder cleaners in series operating at one or two speeds. Overall, in comparison to the base...

  14. 21 CFR 878.4410 - Low energy ultrasound wound cleaner.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Low energy ultrasound wound cleaner. 878.4410... (CONTINUED) MEDICAL DEVICES GENERAL AND PLASTIC SURGERY DEVICES Surgical Devices § 878.4410 Low energy ultrasound wound cleaner. (a) Identification. A low energy ultrasound wound cleaner is a device that...

  15. 21 CFR 880.6150 - Ultrasonic cleaner for medical instruments.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Personal Use Miscellaneous Devices § 880.6150 Ultrasonic cleaner for medical instruments. (a) Identification. An ultrasonic cleaner for medical instruments is a device intended for cleaning medical... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ultrasonic cleaner for medical instruments....

  16. 21 CFR 880.6150 - Ultrasonic cleaner for medical instruments.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Personal Use Miscellaneous Devices § 880.6150 Ultrasonic cleaner for medical instruments. (a) Identification. An ultrasonic cleaner for medical instruments is a device intended for cleaning medical... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Ultrasonic cleaner for medical instruments....

  17. 21 CFR 880.6150 - Ultrasonic cleaner for medical instruments.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Personal Use Miscellaneous Devices § 880.6150 Ultrasonic cleaner for medical instruments. (a) Identification. An ultrasonic cleaner for medical instruments is a device intended for cleaning medical... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Ultrasonic cleaner for medical instruments....

  18. 21 CFR 880.6150 - Ultrasonic cleaner for medical instruments.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Personal Use Miscellaneous Devices § 880.6150 Ultrasonic cleaner for medical instruments. (a) Identification. An ultrasonic cleaner for medical instruments is a device intended for cleaning medical... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Ultrasonic cleaner for medical instruments....

  19. 21 CFR 880.6150 - Ultrasonic cleaner for medical instruments.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... Personal Use Miscellaneous Devices § 880.6150 Ultrasonic cleaner for medical instruments. (a) Identification. An ultrasonic cleaner for medical instruments is a device intended for cleaning medical... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Ultrasonic cleaner for medical instruments....

  20. 21 CFR 878.4410 - Low energy ultrasound wound cleaner.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Low energy ultrasound wound cleaner. 878.4410... (CONTINUED) MEDICAL DEVICES GENERAL AND PLASTIC SURGERY DEVICES Surgical Devices § 878.4410 Low energy ultrasound wound cleaner. (a) Identification. A low energy ultrasound wound cleaner is a device that...

  1. 21 CFR 878.4410 - Low energy ultrasound wound cleaner.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Low energy ultrasound wound cleaner. 878.4410... (CONTINUED) MEDICAL DEVICES GENERAL AND PLASTIC SURGERY DEVICES Surgical Devices § 878.4410 Low energy ultrasound wound cleaner. (a) Identification. A low energy ultrasound wound cleaner is a device that...

  2. 21 CFR 878.4410 - Low energy ultrasound wound cleaner.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Low energy ultrasound wound cleaner. 878.4410... (CONTINUED) MEDICAL DEVICES GENERAL AND PLASTIC SURGERY DEVICES Surgical Devices § 878.4410 Low energy ultrasound wound cleaner. (a) Identification. A low energy ultrasound wound cleaner is a device that...

  3. 21 CFR 878.4410 - Low energy ultrasound wound cleaner.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Low energy ultrasound wound cleaner. 878.4410... (CONTINUED) MEDICAL DEVICES GENERAL AND PLASTIC SURGERY DEVICES Surgical Devices § 878.4410 Low energy ultrasound wound cleaner. (a) Identification. A low energy ultrasound wound cleaner is a device that...

  4. 16 CFR 501.3 - Replacement bags for vacuum cleaners.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Replacement bags for vacuum cleaners. 501.3... REQUIREMENTS AND PROHIBITIONS UNDER PART 500 § 501.3 Replacement bags for vacuum cleaners. Replacement bags for vacuum cleaners, packaged and labeled for retail sale are exempt from the requirements of § 500.15a...

  5. 16 CFR 501.3 - Replacement bags for vacuum cleaners.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Replacement bags for vacuum cleaners. 501.3... REQUIREMENTS AND PROHIBITIONS UNDER PART 500 § 501.3 Replacement bags for vacuum cleaners. Replacement bags for vacuum cleaners, packaged and labeled for retail sale are exempt from the requirements of § 500.15a...

  6. 16 CFR 501.3 - Replacement bags for vacuum cleaners.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Replacement bags for vacuum cleaners. 501.3... REQUIREMENTS AND PROHIBITIONS UNDER PART 500 § 501.3 Replacement bags for vacuum cleaners. Replacement bags for vacuum cleaners, packaged and labeled for retail sale are exempt from the requirements of § 500.15a...

  7. 16 CFR 501.3 - Replacement bags for vacuum cleaners.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Replacement bags for vacuum cleaners. 501.3... REQUIREMENTS AND PROHIBITIONS UNDER PART 500 § 501.3 Replacement bags for vacuum cleaners. Replacement bags for vacuum cleaners, packaged and labeled for retail sale are exempt from the requirements of § 500.15a...

  8. 16 CFR 501.3 - Replacement bags for vacuum cleaners.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Replacement bags for vacuum cleaners. 501.3... REQUIREMENTS AND PROHIBITIONS UNDER PART 500 § 501.3 Replacement bags for vacuum cleaners. Replacement bags for vacuum cleaners, packaged and labeled for retail sale are exempt from the requirements of § 500.15a...

  9. GUIDE TO CLEANER TECHNOLOGIES: ORGANIC COATING REPLACEMENTS

    EPA Science Inventory

    This guide describes available and emerging cleaner technologies that can be used to reduce emissions and wastes from paint and coatings applications. Environmental concerns and increasing costs of organic chemicals and metals are leading to changes in the formulation of organic ...

  10. Analysis of the interactions between pentacene film and air molecules by means of Raman spectroscopy

    NASA Astrophysics Data System (ADS)

    De Angelis, F.; Das, G.; Di Fabrizio, E.

    2008-09-01

    We report on the interactions between spin-coated pentacene films and molecules present in air (nitrogen, oxygen, and moisture) studied by means of micro-Raman spectroscopy. We found that while oxygen does not interact with pentacene, water molecules diffuse in the film proportionally to the relative humidity of the ambient, giving rise to an interaction that affects pentacene's optical properties. These findings are fully reversible when dry ambient is restored, and they could be ascribed to the formation of a reversible water-pentacene complex theoretically calculated. This interaction affects a specific pentacene vibration mode that could lead to reversible formation of electron traps involved in the degradation of the electrical performance of pentacene.

  11. Variability of stratospheric mean age of air linked to residual circulation and eddy mixing

    NASA Astrophysics Data System (ADS)

    Ploeger, Felix; Riese, Martin; Konopka, Paul; Müller, Rolf; Stiller, Gabi

    2014-05-01

    We analyze the effects of the stratospheric residual circulation and eddy mixing on the variability of mean age of air (AoA) within the framework of the isentropic zonal mean continuity equation. The AoA for the period 2002-2012 has been simulated with the Lagrangian chemistry transport model CLaMS driven by ERA-Interim winds and diabatic heating rates. We find that throughout the stratosphere the effects of the residual circulation and of eddy mixing on AoA are opposite and cancel to a large degree, with the net AoA changes resulting from this delicate balance. Mixing increases AoA equatorwards of about 40 degrees by mixing in aged mid-latitude air, whereas it decreases AoA at higher latitudes. Throughout the tropical stratosphere and in the polar upper stratosphere AoA variability is dominated by the residual circulation. In the subtropics and mid-latitudes AoA variability is dominated mainly by eddy mixing and AoA is not a unique proxy for varibility in the residual circulation. The simulated AoA change during the last decade shows a nonuniform pattern, with a significant AoA increase in the northern hemisphere consistent with recent satellite observations by MIPAS, and decreasing AoA in the lowest stratosphere. Interpreting these AoA changes requires careful consideration of both changes in the residual circulation and changes in eddy mixing. The AoA decrease in the lowest stratosphere results from a strengthening residual circulation, related to an accelerating shallow residual circulation branch. Above about 450K simulated AoA evolves differently than below, with a clear increase in the northern subtropics and mid-latitudes and a decrease in the southern hemisphere. This AoA change pattern during the last decade appears to be related to a southward shift of the subtropical mixing barriers, in good agreement with recent analysis of MIPAS mean age and tracer data.

  12. Assessing changes in stratospheric mean age of air and fractional release using historical trace gas observations

    NASA Astrophysics Data System (ADS)

    Laube, Johannes; Bönisch, Harald; Engel, Andreas; Röckmann, Thomas; Sturges, William

    2014-05-01

    Large-scale stratospheric transport is pre-dominantly governed by the Brewer-Dobson circulation. Due to climatic change a long-term acceleration of this residual stratospheric circulation has been proposed (e.g. Austin et al.,2006). Observational evidence has revealed indications for temporary changes (e.g. Bönisch et al., 2011) but a confirmation of a significant long-term trend is missing so far (e.g. Engel et al., 2009). A different aspect is a possible long-term change in the break-down of chemically important species such as chlorofluorocarbons as proposed by Butchart et al. 2001. Recent studies show significant differences adding up to more than 20 % in the chlorine released from such compounds (Newman et al., 2007; Laube et al., 2013). We here use a data set of three long-lived trace gases, namely SF6, CF2Cl2, and N2O, as measured in whole-air samples collected during balloon and aircraft flights between 1975 and 2011, to assess changes in stratospheric transport and chemistry. For this purpose we utilise the mean stratospheric transit times (or mean ages of air) in combination with a measure of the chemical decomposition (i.e. fractional release factors). We also evaluate the influence of different trend correction methods on these quantities and explore their variability with latitude, altitude, and season. References Austin, J. & Li, F.: On the relationship between the strength of the Brewer-Dobson circulation and the age of stratospheric air, Geophys. Res. Lett., 33, L17807, 2006. Bönisch, H., Engel, A., Birner, Th., Hoor, P., Tarasick, D. W., and Ray, E. A.: On the structural changes in the Brewer-Dobson circulation after 2000, Atmos. Chem. Phys., 11, 3937-3948, 2011. Butchart, N. & Scaife, A. A. Removal of chlorofluorocarbons by increased mass exchange between the stratosphere and troposphere in a changing climate. Nature, 410, 799-802, 2001. Engel, A., Möbius, T., Bönisch, H., Schmidt, U., Heinz, R., Levin, I., Atlas, E., Aoki, S., Nakazawa, T

  13. Effect of airstream velocity on mean drop diameters of water sprays produced by pressure and air atomizing nozzles

    NASA Technical Reports Server (NTRS)

    Ingebo, R. D.

    1977-01-01

    A scanning radiometer was used to determine the effect of airstream velocity on the mean drop diameter of water sprays produced by pressure atomizing and air atomizing fuel nozzles used in previous combustion studies. Increasing airstream velocity from 23 to 53.4 meters per second reduced the Sauter mean diameter by approximately 50 percent with both types of fuel nozzles. The use of a sonic cup attached to the tip of an air assist nozzle reduced the Sauter mean diameter by approximately 40 percent. Test conditions included airstream velocities of 23 to 53.4 meters per second at 293 K and atmospheric pressure.

  14. Combustion Chemistry Diagnostics for Cleaner Processes.

    PubMed

    Kohse-Höinghaus, Katharina

    2016-09-12

    Climate change, environmental problems, urban pollution, and the dependence on fossil fuels demand cleaner, renewable energy strategies. However, they also ask for urgent advances in combustion science to reduce emissions. For alternative fuels and new combustion regimes, crucial information about the chemical reactions from fuel to exhaust remains lacking. Understanding such relations between combustion process, fuel, and emissions needs reliable experimental data from a wide range of conditions to provide a firm basis for predictive modeling of practical combustion processes. PMID:27440049

  15. Air- coupled ultrasonic testing of CFRP rods by means of guided waves

    NASA Astrophysics Data System (ADS)

    Kažys, Rymantas; Raišutis, Renaldas; Žukauskas, Egidijus; Mažeika, Liudas; Vladišauskas, Alfonsas

    2010-01-01

    One of the most important parts of the gliders is a lightweight longeron reinforcement made of carbon fibre reinforced plastics (CFRP) rods. These small diameter (a few millimetres) rods during manufacturing are glued together in epoxy filled matrix in order to build the arbitrary spar profile. However, the defects presenting in the rods such as brake of fibres, lack of bonding, reduction of density affect essentially the strength of the construction and are very complicated in repairing. Therefore, appropriate non-destructive testing techniques of carbon fibber rods should be applied before gluing them together. The objective of the presented work was development of NDT technique of CFRP rods used for aerospace applications, which is based on air- coupled excitation/reception of guided waves. The regularities of ultrasonic guided waves propagating in both circular and rectangular cross-section CFRP rods immersed into water were investigated and it was shown that the guided waves propagating along sample of the rod create leaky waves which are radiated into a surrounding medium. The ultrasonic receiver scanned over the rod enables to pick-up the leaky waves and to determine the non-uniformities of propagation caused by the defects. Theoretical investigations were carried out by means of numerical simulations based on a 2D and 3D finite differences method. By modelling and experimental investigations it was demonstrated that presence of any type of the defect disturbs the leaky wave and enables to detect them. So, the spatial position of defects can be determined also. It was shown that such important defects as a disbond of the plies essentially reduce or even completely suppress the leaky wave, so they can be detected quit easily.

  16. Into Thin Air.

    ERIC Educational Resources Information Center

    Kennedy, Mike

    2001-01-01

    Shows how schools are working to avoid the types of equipment, supplies, and maintenance practices that harm indoor air quality. Simple steps to maintaining a cleaner indoor air environment are highlighted as are steps to reducing the problem air quality and the occurrence of asthma. (GR)

  17. Mean Ages of Stratospheric Air Derived From in Situ Observations of CO2, CH4, and N2O

    NASA Technical Reports Server (NTRS)

    Andrews, A. E.; Boering, K. A.; Daube, B. C.; Wofsy, S. C.; Loewenstein, M.; Jost, H.; Podolske, J. R.; Webster, C. R.; Herman, R. L.; Scott, D. C.; Einaudi, Franco (Technical Monitor)

    2001-01-01

    Accurate mean ages for stratospheric air have been derived from a spatially and temporally comprehensive set of in situ observations of CO2, CH4, and N2O obtained from 1992 to 1998 from the NASA ER-2 aircraft and balloon flights. Errors associated with the tropospheric CO2 seasonal cycle and interannual variations in the CO2 growth rate are less than 0.5 year throughout the stratosphere and less than 0.3 year for air older than 2 years (N2O less than 275 ppbv), indicating that the age spectra are broad enough to attenuate these influences over the time period covered by these observations. The distribution of mean age with latitude and altitude provides detailed, quantitative information about the general circulation of the stratosphere. At 20 km, sharp meridional gradients in the mean age are observed across the subtropics. Between 20 and 30 km, the average difference in mean age between the tropics and midlatitudes is approximately 2 years, with slightly smaller differences at higher and lower altitudes. The mean age in the midlatitude middle stratosphere (approx. 25-32 km) is relatively constant with respect to altitude at 5 plus or minus 0.5 years. Comparison with earlier balloon observations of CO2 dating back to the 1970s indicates that the mean age of air in this region has remained within 11 year of its current value over the last 25 years. A climatology of mean age is derived from the observed compact relationship between mean age and N2O. These characteristics of the distribution of mean age in the stratosphere will serve as critically needed diagnostics for models of stratospheric transport.

  18. The Impact of Dry Midlevel Air on Hurricane Intensity in Idealized Simulations with No Mean Flow

    NASA Technical Reports Server (NTRS)

    Braun, Scott A.; Sippel, Jason A.; Nolan, David S.

    2012-01-01

    This study examines the potential negative influences of dry midlevel air on the development of tropical cyclones (specifically, its role in enhancing cold downdraft activity and suppressing storm development). The Weather Research and Forecasting model is used to construct two sets of idealized simulations of hurricane development in environments with different configurations of dry air. The first set of simulations begins with dry air located north of the vortex center by distances ranging from 0 to 270 km, whereas the second set of simulations begins with dry air completely surrounding the vortex, but with moist envelopes in the vortex core ranging in size from 0 to 150 km in radius. No impact of the dry air is seen for dry layers located more than 270 km north of the initial vortex center (approximately 3 times the initial radius of maximum wind). When the dry air is initially closer to the vortex center, it suppresses convective development where it entrains into the storm circulation, leading to increasingly asymmetric convection and slower storm development. The presence of dry air throughout the domain, including the vortex center, substantially slows storm development. However, the presence of a moist envelope around the vortex center eliminates the deleterious impact on storm intensity. Instead, storm size is significantly reduced. The simulations suggest that dry air slows intensification only when it is located very close to the vortex core at early times. When it does slow storm development, it does so primarily by inducing outward- moving convective asymmetries that temporarily shift latent heating radially outward away from the high-vorticity inner core.

  19. 77 FR 43141 - Air Carrier Hazardous Materials Passenger Notification Requirements: Acceptable Means of Compliance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-23

    ...: Acceptable Means of Compliance AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of public... Notification Requirements and Acceptable Means of Compliance with 49 CFR 175.25. The public meeting, to be held... to submit comments and participate in discussions concerning the acceptability of various means...

  20. Air

    MedlinePlus

    ... do to protect yourself from dirty air . Indoor air pollution and outdoor air pollution Air can be polluted indoors and it can ... this chart to see what things cause indoor air pollution and what things cause outdoor air pollution! Indoor ...

  1. 7 CFR 3201.80 - Electronic components cleaners.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 15 2014-01-01 2014-01-01 false Electronic components cleaners. 3201.80 Section 3201... PROCUREMENT Designated Items § 3201.80 Electronic components cleaners. (a) Definition. Products that are designed to wash or remove dirt or extraneous matter from electronic parts, devices, circuits, or...

  2. 7 CFR 3201.80 - Electronic components cleaners.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 15 2013-01-01 2013-01-01 false Electronic components cleaners. 3201.80 Section 3201... PROCUREMENT Designated Items § 3201.80 Electronic components cleaners. (a) Definition. Products that are designed to wash or remove dirt or extraneous matter from electronic parts, devices, circuits, or...

  3. 7 CFR 3201.65 - Concrete and asphalt cleaners.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 15 2013-01-01 2013-01-01 false Concrete and asphalt cleaners. 3201.65 Section 3201... PROCUREMENT Designated Items § 3201.65 Concrete and asphalt cleaners. (a) Definition. Chemicals used in concrete etching as well as to remove petroleum-based soils, lubricants, paints, mastics, organic...

  4. 7 CFR 3201.65 - Concrete and asphalt cleaners.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 15 2014-01-01 2014-01-01 false Concrete and asphalt cleaners. 3201.65 Section 3201... PROCUREMENT Designated Items § 3201.65 Concrete and asphalt cleaners. (a) Definition. Chemicals used in concrete etching as well as to remove petroleum-based soils, lubricants, paints, mastics, organic...

  5. 7 CFR 3201.65 - Concrete and asphalt cleaners.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 15 2012-01-01 2012-01-01 false Concrete and asphalt cleaners. 3201.65 Section 3201... PROCUREMENT Designated Items § 3201.65 Concrete and asphalt cleaners. (a) Definition. Chemicals used in concrete etching as well as to remove petroleum-based soils, lubricants, paints, mastics, organic...

  6. 7 CFR 3201.69 - Floor cleaners and protectors.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... PROCUREMENT Designated Items § 3201.69 Floor cleaners and protectors. (a) Definition. Cleaning solutions for... 7 Agriculture 15 2013-01-01 2013-01-01 false Floor cleaners and protectors. 3201.69 Section 3201.69 Agriculture Regulations of the Department of Agriculture (Continued) OFFICE OF PROCUREMENT...

  7. 7 CFR 3201.83 - Furniture cleaners and protectors.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 15 2014-01-01 2014-01-01 false Furniture cleaners and protectors. 3201.83 Section 3201.83 Agriculture Regulations of the Department of Agriculture (Continued) OFFICE OF PROCUREMENT AND... PROCUREMENT Designated Items § 3201.83 Furniture cleaners and protectors. (a) Definition. Products designed...

  8. 7 CFR 3201.69 - Floor cleaners and protectors.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... PROCUREMENT Designated Items § 3201.69 Floor cleaners and protectors. (a) Definition. Cleaning solutions for... 7 Agriculture 15 2014-01-01 2014-01-01 false Floor cleaners and protectors. 3201.69 Section 3201.69 Agriculture Regulations of the Department of Agriculture (Continued) OFFICE OF PROCUREMENT...

  9. 7 CFR 3201.69 - Floor cleaners and protectors.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... PROCUREMENT Designated Items § 3201.69 Floor cleaners and protectors. (a) Definition. Cleaning solutions for... 7 Agriculture 15 2012-01-01 2012-01-01 false Floor cleaners and protectors. 3201.69 Section 3201.69 Agriculture Regulations of the Department of Agriculture (Continued) OFFICE OF PROCUREMENT...

  10. 7 CFR 3201.83 - Furniture cleaners and protectors.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 15 2013-01-01 2013-01-01 false Furniture cleaners and protectors. 3201.83 Section 3201.83 Agriculture Regulations of the Department of Agriculture (Continued) OFFICE OF PROCUREMENT AND... PROCUREMENT Designated Items § 3201.83 Furniture cleaners and protectors. (a) Definition. Products designed...

  11. Performance of a Modified Cylinder Cleaner, Part I

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A chisel-shape grid bar with a sharp cutting edge was designed and installed in a modified cylinder cleaner. The cleaner’s seed cotton and lint cleaning performances were evaluated in two tests. Results indicated that a cylinder cleaner with narrowly spaced chisel-shape grid bars connected in seri...

  12. 7 CFR 2902.35 - Bathroom and spa cleaners.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 15 2011-01-01 2011-01-01 false Bathroom and spa cleaners. 2902.35 Section 2902.35 Agriculture Regulations of the Department of Agriculture (Continued) OFFICE OF ENERGY POLICY AND NEW USES... Items § 2902.35 Bathroom and spa cleaners. (a) Definition. Products that are designed to clean...

  13. 7 CFR 2902.35 - Bathroom and spa cleaners.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Bathroom and spa cleaners. 2902.35 Section 2902.35 Agriculture Regulations of the Department of Agriculture (Continued) OFFICE OF ENERGY POLICY AND NEW USES... Items § 2902.35 Bathroom and spa cleaners. (a) Definition. Products that are designed to clean...

  14. Saw-type Lint Cleaner Damage by Machinery Components

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Saw-type lint cleaners are commonly used to improve the overall quality of ginned lint by removing non-lint content and less desirable short fibers; however saw-type lint cleaners discard a certain amount of good lint while removing foreign matter and short fiber from the good lint. The saw-type li...

  15. A New Grid Bar Design for a Modified Cylinder Cleaner

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Grid bars having a chisel shape and sharp cutting edge were designed and installed in a modified cylinder cleaner. The modified cleaner’s seed cotton and lint cleaning performances were evaluated in two tests. Results indicated that seed-cotton cleaning efficiency of the modified cylinder cleaner ...

  16. Materials Compatibility Testing in RSRM ODC: Free Cleaner Selection

    NASA Technical Reports Server (NTRS)

    Keen, Jill M.; Sagers, Neil W.; McCool, Alex (Technical Monitor)

    2001-01-01

    Government regulations have mandated production phase-outs of a number of solvents, including 1,1,1-trichloroethane, an ozone-depleting chemical (ODC). This solvent was used extensively in the production of the Reusable Solid Rocket Motors (RSRMs) for the Space Shuttle. Many tests have been performed to identify replacement cleaners. One major area of concern in the selection of a new cleaner has been compatibility. Some specific areas considered included cleaner compatibility with non-metallic surfaces, painted surfaces, support materials such as gloves and wipers as well as corrosive properties of the cleaners on the alloys used on these motors. The intent of this paper is to summarize the test logic, methodology, and results acquired from testing the many cleaner and material combinations.

  17. Flow Visualization Proposed for Vacuum Cleaner Nozzle Designs

    NASA Technical Reports Server (NTRS)

    2005-01-01

    In 1995, the NASA Lewis Research Center and the Kirby Company (a major vacuum cleaner company) began negotiations for a Space Act Agreement to conduct research, technology development, and testing involving the flow behavior of airborne particulate flow behavior. Through these research efforts, we hope to identify ways to improve suction, flow rate, and surface agitation characteristics of nozzles used in vacuum cleaner nozzles. We plan to apply an advanced visualization technology, known as Stereoscopic Imaging Velocimetry (SIV), to a Kirby G-4 vacuum cleaner. Resultant data will be analyzed with a high-speed digital motion analysis system. We also plan to evaluate alternative vacuum cleaner nozzle designs. The overall goal of this project is to quantify both velocity fields and particle trajectories throughout the vacuum cleaner nozzle to optimize its "cleanability"--its ability to disturb and remove embedded dirt and other particulates from carpeting or hard surfaces. Reference

  18. Metal-air cells comprising collapsible foam members and means for minimizing internal pressure buildup

    NASA Technical Reports Server (NTRS)

    Woodruff, Glenn (Inventor); Putt, Ronald A. (Inventor)

    1994-01-01

    This invention provides a prismatic zinc-air cell including, in general, a prismatic container having therein an air cathode, a separator and a zinc anode. The container has one or more oxygen access openings, and the air cathode is disposed in the container in gaseous communication with the oxygen access openings so as to allow access of oxygen to the cathode. The separator has a first side in electrolytic communication with the air cathode and a second side in electrolytic communication with the zinc anode. The separator isolates the cathode and the zinc anode from direct electrical contact and allows passage of electrolyte therebetween. An expansion chamber adjacent to the zinc anode is provided which accommodates expansion of the zinc anode during discharge of the cell. A suitable collapsible foam member generally occupies the expansion space, providing sufficient resistance tending to oppose movement of the zinc anode away from the separator while collapsing upon expansion of the zinc anode during discharge of the cell. One or more vent openings disposed in the container are in gaseous communication with the expansion space, functioning to satisfactorily minimize the pressure buildup within the container by venting gasses expelled as the foam collapses during cell discharge.

  19. The meaning of air quality and flue gas emission standards for public acceptance of new thermal power plants.

    PubMed

    Barbalić, N; Marijan, G; Marić, M

    2000-06-01

    For the time being only 30-40% of the electric energy supply in Croatia comes from burning fossil fuel. New capacities of 800-1400 MW for the next decade will have to rely on the exclusive use of fossil fuels in thermal power plants (TPP). Public opinion will probably have a decisive influence on the issuing of construction permissions. The potential adverse effects on air seem to be the main argument against construction of TPPs. The priority is therefore to unambiguously state what air quality is warranted in the influenced area for the whole operation period of a TPP. It is important that the public should understand the real meaning of current air quality standards and emission limits. The only known way to do it today is through comparison with the corresponding standards and limits accepted worldwide. This paper discusses some important aspects of such comparison. PMID:11103526

  20. Improved global prediction of 300 nautical mile mean free air anomalies

    NASA Technical Reports Server (NTRS)

    Cruz, J. Y.

    1982-01-01

    Current procedures used for the global prediction of 300nm mean anomalies starting from known values of 1 deg by 1 deg mean anomalies yield unreasonable prediction results when applied to 300nm blocks which have a rapidly varying gravity anomaly field and which contain relatively few observed 60nm blocks. Improvement of overall 300nm anomaly prediction is first achieved by using area-weighted as opposed to unweighted averaging of the 25 generated 60nm mean anomalies inside the 300nm block. Then, improvement of prediction over rough 300nm blocks is realized through the use of fully known 1 deg by 1 deg mean elevations, taking advantage of the correlation that locally exists between 60nm mean anomalies and 60nm mean elevations inside the 300nm block. An improved prediction model which adapts itself to the roughness of the local anomaly field is found to be the model of Least Squares Collocation with systematic parameters, the systematic parameter being the slope b which is a type of Bouguer slope expressing the correlation that locally exists between 60nm mean anomalies and 60nm mean elevations.

  1. RESEARCH ON IMPACT OF OZONE GENERATORS ON INDOOR AIR QUALITY (INDOOR ENVIRONMENT MANAGEMENT BRANCH, AIR POLLUTION PREVENTION AND CONTROL DIVISION, NRMRL)

    EPA Science Inventory

    Ozone-generating air cleaners are marketed to homeowners as well as business establishments ostensibly to remove odors and other contaminants from indoor air. A typical air cleaner consists of an ozone generator, fan, housing, and controls. Units may also employ filters to remov...

  2. Beyond Symbiosis: Cleaner Shrimp Clean Up in Culture

    PubMed Central

    Militz, Thane A.; Hutson, Kate S.

    2015-01-01

    Cleaner organisms exhibit a remarkable natural behaviour where they consume ectoparasites attached to “client” organisms. While this behaviour can be utilized as a natural method of parasitic disease control (or biocontrol), it is not known whether cleaner organisms can also limit reinfection from parasite eggs and larvae within the environment. Here we show that cleaner shrimp, Lysmata amboinensis, consume eggs and larvae of a harmful monogenean parasite, Neobenedenia sp., in aquaculture. Shrimp consumed parasite eggs under diurnal (63%) and nocturnal (14%) conditions as well as infectious larvae (oncomiracidia) diurnally (26%). Furthermore, we trialled the inclusion of cleaner shrimp for preventative parasite management of ornamental fish, Pseudanthias squamipinnis, and found shrimp reduced oncomiracidia infection success of host fish by half compared to controls (held without shrimp). Fish held without cleaner shrimp exhibited pigmentation changes as a result of infection, possibly indicative of a stress response. These results provide the first empirical evidence that cleaner organisms reduce parasite loads in the environment through non-symbiotic cleaning activities. Our research findings have relevance to aquaculture and the marine ornamental trade, where cleaner shrimp could be applied for prophylaxis and control of ectoparasite infections. PMID:25706952

  3. Beyond symbiosis: cleaner shrimp clean up in culture.

    PubMed

    Militz, Thane A; Hutson, Kate S

    2015-01-01

    Cleaner organisms exhibit a remarkable natural behaviour where they consume ectoparasites attached to "client" organisms. While this behaviour can be utilized as a natural method of parasitic disease control (or biocontrol), it is not known whether cleaner organisms can also limit reinfection from parasite eggs and larvae within the environment. Here we show that cleaner shrimp, Lysmata amboinensis, consume eggs and larvae of a harmful monogenean parasite, Neobenedenia sp., in aquaculture. Shrimp consumed parasite eggs under diurnal (63%) and nocturnal (14%) conditions as well as infectious larvae (oncomiracidia) diurnally (26%). Furthermore, we trialled the inclusion of cleaner shrimp for preventative parasite management of ornamental fish, Pseudanthias squamipinnis, and found shrimp reduced oncomiracidia infection success of host fish by half compared to controls (held without shrimp). Fish held without cleaner shrimp exhibited pigmentation changes as a result of infection, possibly indicative of a stress response. These results provide the first empirical evidence that cleaner organisms reduce parasite loads in the environment through non-symbiotic cleaning activities. Our research findings have relevance to aquaculture and the marine ornamental trade, where cleaner shrimp could be applied for prophylaxis and control of ectoparasite infections. PMID:25706952

  4. Green chemicals: Searching for cleaner solvents

    SciTech Connect

    Lucas, A.

    1994-10-05

    While increased pressure from EPA has solvents producers scrambling to find greener alternatives, many say the cost effectiveness and performance characteristics of traditional technologies are such that they will not disappear quickly. Though a variety of alternative {open_quotes}green{close_quotes} solvents have been developed and commercialized, better means of solvent recovery have also come along, ensuring continued use of many organic solvents. The 1990 Clean Air Act (CAA), designed to eliminate volatile organic compounds (VOCs), ozone depleters, and other hazardous air pollutants (HAPs), has put limits on many organic solvents. Those most under fire are chlorinated solvents, such as methylene chloride, 1,1,1 trichloroethylene (methyl chloroform), and chlorofluorocarbon (CFC)-113. Producers have been developing a variety of lower VOC solvents to replace those being phased out or regulated. Among those likely to experience most growth are aliphatic hydrocarbons to replace chlorinated solvents in cleaning applications. Growth is also expected for alcohols, esters, and glycol ethers for other end-use applications.

  5. Cleaner wrasse influence habitat selection of young damselfish

    NASA Astrophysics Data System (ADS)

    Sun, D.; Cheney, K. L.; Werminghausen, J.; McClure, E. C.; Meekan, M. G.; McCormick, M. I.; Cribb, T. H.; Grutter, A. S.

    2016-06-01

    The presence of bluestreak cleaner wrasse, Labroides dimidiatus, on coral reefs increases total abundance and biodiversity of reef fishes. The mechanism(s) that cause such shifts in population structure are unclear, but it is possible that young fish preferentially settle into microhabitats where cleaner wrasse are present. As a first step to investigate this possibility, we conducted aquarium experiments to examine whether settlement-stage and young juveniles of ambon damselfish, Pomacentrus amboinensis, selected a microhabitat near a cleaner wrasse (adult or juvenile). Both settlement-stage (0 d post-settlement) and juvenile (~5 weeks post-settlement) fish spent a greater proportion of time in a microhabitat adjacent to L. dimidiatus than in one next to a control fish (a non-cleaner wrasse, Halichoeres melanurus) or one where no fish was present. This suggests that cleaner wrasse may serve as a positive cue during microhabitat selection. We also conducted focal observations of cleaner wrasse and counts of nearby damselfishes (1 m radius) to examine whether newly settled fish obtained direct benefits, in the form of cleaning services, from being near a cleaner wrasse. Although abundant, newly settled recruits (<20 mm total length) were rarely (2 %) observed being cleaned in 20 min observations compared with larger damselfishes (58 %). Individual damselfish that were cleaned were significantly larger than the median size of the surrounding nearby non-cleaned conspecifics; this was consistent across four species. The selection by settlement-stage fish of a microhabitat adjacent to cleaner wrasse in the laboratory, despite only being rarely cleaned in the natural environment, suggests that even rare cleaning events and/or indirect benefits may drive their settlement choices. This behaviour may also explain the decreased abundance of young fishes on reefs from which cleaner wrasse had been experimentally removed. This study reinforces the potentially important role of

  6. Meteorological adjustment of yearly mean values for air pollutant concentration comparison

    NASA Technical Reports Server (NTRS)

    Sidik, S. M.; Neustadter, H. E.

    1976-01-01

    Using multiple linear regression analysis, models which estimate mean concentrations of Total Suspended Particulate (TSP), sulfur dioxide, and nitrogen dioxide as a function of several meteorologic variables, two rough economic indicators, and a simple trend in time are studied. Meteorologic data were obtained and do not include inversion heights. The goodness of fit of the estimated models is partially reflected by the squared coefficient of multiple correlation which indicates that, at the various sampling stations, the models accounted for about 23 to 47 percent of the total variance of the observed TSP concentrations. If the resulting model equations are used in place of simple overall means of the observed concentrations, there is about a 20 percent improvement in either: (1) predicting mean concentrations for specified meteorological conditions; or (2) adjusting successive yearly averages to allow for comparisons devoid of meteorological effects. An application to source identification is presented using regression coefficients of wind velocity predictor variables.

  7. Use of GC/MS and Microtome Techniques as Methods to Evaluate ODC Free Cleaner Diffusion and Evaporation in Insulation and Phenolic Case Material

    NASA Technical Reports Server (NTRS)

    Biegert, L. L.

    2001-01-01

    Because of the 1990 Clean Air Act Amendment (CAAA) many chlorinated solvents used in the aerospace industry are being phased out. Replacement of the ODC (ozone-depleting chemicals) with less volatile, non-ozone depleting cleaners has been extensively studied over the past seven years at Thiokol Propulsion, a Division of Cordant Technologies, Inc. The down selection of ODC replacement cleaners has been based on several factors including the diffusion evaporation of the cleaners in selected substrates. Methodologies were developed to evaluate the cleaner content in substrates. Methods of cutting thin slices of material (microtoming) were combined with GC/MS (gas chromatography/mass spectroscopy) analysis. Substrates evaluated in this study include potential solid rocket motor materials: ASNBR (asbestos-filled nitrile butadiene rubber) and CFEPDM (carbon-filled ethylene propylene dimonomer) insulation and glass (GCP), carbon (CCP) and silica (SCP) cloth phenolic substrates with fibers either parallel (0 deg) or perpendicular (90 deg) to the surface. Residue profiles indicate both cleaner and substrate composition affect the diffusion and subsequent evaporation of the cleaner from the substrate surface.

  8. Ozone Generators That Are Sold as Air Cleaners

    MedlinePlus

    ... possible even when a user follows the manufacturer’s operating instructions . There are many brands and models of ... suggests that users err on the side of operating a more powerful machine than would normally be ...

  9. ERMS guidebook: Cleaner air, reduced cost, Illinois EPA

    SciTech Connect

    1998-04-01

    The Illinois EPA has prepared this guidebook to help participants in the Emissions Reduction Market System and other interested persons understand how the system is designed and going to be operated. This guidebook serves as a supplement to other important reference materials such as the ERMS regulations (35 Ill. Admin. Code 205) and the Environmental Protection Act (Sec. 98.).

  10. Air cleaning and radon decay product mitigation

    SciTech Connect

    Hopke, P.K. ); Li, C.S. . John B. Pierce Foundation Lab.); Ramamurthi, M. )

    1990-01-01

    We evaluated air cleaning as a means to mitigate risks arising from exposure to indoor radon progeny in several single-family houses in the northeastern United States, using a new, automated, semi-continuous activity-weighted size distribution measurement system. Measurements included radon concentration, condensation nuclei count, and activity-weighted size distribution of radon decay products. Measurements were made with and without the air cleaning system operating. The influence of particles generated by various sources common to normal indoor activities on radon progeny behavior was evaluated. Aerosols were generated by running water in a shower, burning candles, smoking cigarettes, vacuuming, opening doors, and cooking. Both a filtration unit and an electrostatic precipitator were evaluated. Using a room model, the changes in attachment rates, average attachment diameters, and deposition rates of the unattached'' fraction with and without the air cleaning systems were calculated. The air cleaner typically reduced the radon progeny concentrations by 50 to 60%.

  11. Air cleaning and radon decay product mitigation

    SciTech Connect

    Hopke, P.K.; Li, C.S.; Ramamurthi, M.

    1990-12-31

    We evaluated air cleaning as a means to mitigate risks arising from exposure to indoor radon progeny in several single-family houses in the northeastern United States, using a new, automated, semi-continuous activity-weighted size distribution measurement system. Measurements included radon concentration, condensation nuclei count, and activity-weighted size distribution of radon decay products. Measurements were made with and without the air cleaning system operating. The influence of particles generated by various sources common to normal indoor activities on radon progeny behavior was evaluated. Aerosols were generated by running water in a shower, burning candles, smoking cigarettes, vacuuming, opening doors, and cooking. Both a filtration unit and an electrostatic precipitator were evaluated. Using a room model, the changes in attachment rates, average attachment diameters, and deposition rates of the ``unattached`` fraction with and without the air cleaning systems were calculated. The air cleaner typically reduced the radon progeny concentrations by 50 to 60%.

  12. 7 CFR 3201.100 - Aircraft and boat cleaners.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... content for all aircraft and boat cleaners shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product....

  13. 16. INTERIOR VIEW, BASEMENT, LOOKING NORTHWEST AT 'SMUT MILL' CLEANER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. INTERIOR VIEW, BASEMENT, LOOKING NORTHWEST AT 'SMUT MILL'- CLEANER FOR BUCKWHEAT, AND GRAIN CHUTES. GRAIN ELEVATOR TURN-AROUND AT BASE. - Schech's Mill, Beaver Creek State Park, La Crescent, Houston County, MN

  14. Detail exterior view looking northwest showing field gas cleaner in ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail exterior view looking northwest showing field gas cleaner in the center. - Burnsville Natural Gas Pumping Station, Saratoga Avenue between Little Kanawha River & C&O Railroad line, Burnsville, Braxton County, WV

  15. Evaluation of aqueous cleaners as alternatives to vapor degreasing

    SciTech Connect

    Guidotti, R.A.; Schneider, T.W.; Frye, G.C.

    1996-05-01

    As part of the preparation process during assembly of thermally activated batteries, the stainless steel piece parts are normally cleaned by vapor degreasing with trichloroethylene. Severe restrictions on the use of chlorinated and fluorinated hydrocarbons in recent years prompted the evaluation of a number of aqueous cleaners as a replacement technology for this application. A total of seven commercial aqueous degreasers was evaluated in this study at several dilution ratios and temperatures. One organic cleaner was also examined under ambient conditions. The effectiveness of the cleaner was determined by the use of x-ray photoelectron spectroscopy (XPS), which is a surface analytical technique that is very sensitive to low levels of surface contaminants. A quartz-crystal microbalance (QCM) that is immersed in the cleaning bath was evaluated as a tool for monitoring the bath cleanliness. The best overall cleaning results were obtained with Micro, Impro-Clean 3800, and Sonicor cleaners.

  16. Evaluation of aqueous cleaners as alternatives to vapor degreasing

    SciTech Connect

    Guidotti, R.A.; Schneider, T.W.; Frye, G.C.

    1996-02-01

    As part of the preparation process during assembly of thermally activated batteries, the stainless steel piece parts are normally cleaned by vapor degreasing with trichloroethylene. Severe restrictions on the use of chlorinated and fluorinated hydrocarbons in recent years prompted the evaluation of a number of aqueous cleaners as a replacement technology for this application. A total of seven commercial aqueous degreasers was evaluated in this study at several dilution ratios and temperatures. One organic cleaner was also examined under ambient conditions. The effectiveness of the cleaner was determined by the use of x-ray photoelectron spectroscopy (XPS), which is a surface analytical technique that is very sensitive to low levels of surface contaminants. A quartz-crystal microbalance (QCM) that is immersed in the cleaning bath was evaluated as a tool for monitoring the bath cleanliness. The best overall cleaning results were obtained with Micro, Impro-Clean 3800, and Sonicor cleaners.

  17. 7 CFR 2902.34 - Carpet and upholstery cleaners.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... upholstery cleaners shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. The applicable minimum...

  18. ZINC ROUGHER CELLS ON LEFT, ZINC CLEANER CELLS ON RIGHT, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ZINC ROUGHER CELLS ON LEFT, ZINC CLEANER CELLS ON RIGHT, LOOKING NORTH. NOTE ONE STYLE OF DENVER AGITATOR IN LOWER RIGHT CELL. - Shenandoah-Dives Mill, 135 County Road 2, Silverton, San Juan County, CO

  19. LEAD CLEANER CELLS, LOOKING SOUTH SOUTHWEST. NOTE SMALL HANDWHEELS FOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    LEAD CLEANER CELLS, LOOKING SOUTH SOUTHWEST. NOTE SMALL HANDWHEELS FOR GATE VALVES USED TO ADJUST FLOW BETWEEN INDIVIDUAL CELLS. - Shenandoah-Dives Mill, 135 County Road 2, Silverton, San Juan County, CO

  20. Muons in air showers at the Pierre Auger Observatory: Mean number in highly inclined events

    SciTech Connect

    Aab, Alexander

    2015-03-09

    We present the first hybrid measurement of the average muon number in air showers at ultra-high energies, initiated by cosmic rays with zenith angles between 62° and 80° . Our measurement is based on 174 hybrid events recorded simultaneously with the Surface Detector array and the Fluorescence Detector of the Pierre Auger Observatory. The muon number for each shower is derived by scaling a simulated reference profile of the lateral muon density distribution at the ground until it fits the data. A 1019 eV shower with a zenith angle of 67°, which arrives at the Surface Detector array at an altitude of 1450 m above sea level, contains on average (2.68 ± 0.04 ± 0.48 (sys.)) × 107 muons with energies larger than 0.3 GeV. Finally, the logarithmic gain d ln Nµ/d ln E of muons with increasing energy between 4 × 1018 eV and 5 × 1019 eV is measured to be (1.029 ± 0.024 ± 0.030 (sys.)).

  1. Muons in air showers at the Pierre Auger Observatory: Mean number in highly inclined events

    DOE PAGESBeta

    Aab, Alexander

    2015-03-09

    We present the first hybrid measurement of the average muon number in air showers at ultra-high energies, initiated by cosmic rays with zenith angles between 62° and 80° . Our measurement is based on 174 hybrid events recorded simultaneously with the Surface Detector array and the Fluorescence Detector of the Pierre Auger Observatory. The muon number for each shower is derived by scaling a simulated reference profile of the lateral muon density distribution at the ground until it fits the data. A 1019 eV shower with a zenith angle of 67°, which arrives at the Surface Detector array at anmore » altitude of 1450 m above sea level, contains on average (2.68 ± 0.04 ± 0.48 (sys.)) × 107 muons with energies larger than 0.3 GeV. Finally, the logarithmic gain d ln Nµ/d ln E of muons with increasing energy between 4 × 1018 eV and 5 × 1019 eV is measured to be (1.029 ± 0.024 ± 0.030 (sys.)).« less

  2. Replacing Chlorinated-Solvent-Based Cleaners And Adhesives

    NASA Technical Reports Server (NTRS)

    Heaton, Harley; Davidson, Fred

    1995-01-01

    Brief report describes tests conducted to assess feasibility of using selected chemicals as replacements for selected cleaners, primers, and adhesives containing chlorinated solvents. Cleaners, primers, and adhesives in question used in bonding insulating material in steel cases of solid-fuel rocket motors. Necessary to phase out use of chlorinated solvents because of concerns over toxicity and adverse effects on ozone layer in upper atmosphere.

  3. Converting sensitive waste into cleaner energy

    SciTech Connect

    Schriner, D.; Skinner, R.

    1997-10-01

    The destruction of sensitive unclassified information (SUI) has always been expensive due to the need for special controls to ensure its protection from disclosure to unauthorized persons. The sensitive documents were shredded, buried at the landfill, or sent to a recycling company. The Department of Energy (DOE) Idaho National Engineering and Environmental Laboratory (INEEL), operated by Lockheed Martin Idaho Technologies Company (LMITCO), has created an innovative method to dispose of its sensitive unclassified paper waste which has security, economic, and environmental benefits. A new cubing facility at the INEEL converts office and industrial waste into compact cubes which are then combined with coal and burned as a source of heat and process steam to run the Idaho Chemical Processing Plant (ICPP) facility. The process-engineered fuel, consisting of 25% cubes and 75% coal, bums cleaner than coal with lower emissions of sulfur dioxide and nitrogen oxides. The alternative fuel also reduces fuel costs, eliminates paying a recycling company, reduces the expense of landfill disposal, increases the life of the landfill, and provides energy to operate a large facility. The Operations Security (OPSEC) team capitalized on this waste to energy technology by recommending that the large quantities of sensitive information (documents) generated at the INEEL be disposed of in this manner. In addition to the economic and environmental benefits, this disposal method minimizes the vulnerabilities of SUI from disclosure to unauthorized personnel. The {open_quotes}cuber{close_quotes} technology has potential application in government and industry for protection of SUI.

  4. Oxygen Systems Cleaners for Aerospace Applications

    NASA Technical Reports Server (NTRS)

    Davis, Samuel E.; Lowery, Freida

    1997-01-01

    New environmental regulations have forced extensive evaluations of many different cleaning agents for use in oxygen systems. This is no simple process because pure oxygen is a very strong oxidizer, and when placed in contact with a foreign substance, the combination may be explosive. This foreign substance can easily be a cleaning agent residue left over in the oxygen system after cleaning. This paper focuses on the factors that must be considered when selecting a cleaning agent for oxygen systems, as well as the approval processes which are currently being utilized by NASA for oxygen compatibility of materials. This paper will provide a working description of how to begin selecting a cleaning agent for oxygen systems. The paper will present the following: Background information on the necessity of a stringent selection process for oxygen system cleaners; Specifications and regulations concerning cleaning for oxygen service; Changing oxygen cleaning specifications given current environmental concerns; Testing for cleanliness in oxygen systems, Cleaning agents that have been tested for oxygen systems, including an extensive list of some of the newer 'environmentally friendly' cleaning agents; and Test results and conclusions from the testing. The paper will also provide instructions on the proper procedures for obtaining NASA approval on a candidate oxygen systems cleaning agent.

  5. Genesis Ultrapure Water Megasonic Wafer Spin Cleaner

    NASA Technical Reports Server (NTRS)

    Allton, Judith H.; Stansbery, Eileen K.; Calaway, Michael J.; Rodriquez, Melissa C.

    2013-01-01

    A device removes, with high precision, the majority of surface particle contamination greater than 1-micron-diameter in size from ultrapure semiconductor wafer materials containing implanted solar wind samples returned by NASA's Genesis mission. This cleaning device uses a 1.5-liter/minute flowing stream of heated ultrapure water (UPW) with 1- MHz oscillating megasonic pulse energy focused at 3 to 5 mm away from the wafer surface spinning at 1,000 to 10,000 RPM, depending on sample size. The surface particle contamination is removed by three processes: flowing UPW, megasonic cavitations, and centripetal force from the spinning wafer. The device can also dry the wafer fragment after UPW/megasonic cleaning by continuing to spin the wafer in the cleaning chamber, which is purged with flowing ultrapure nitrogen gas at 65 psi (.448 kPa). The cleaner also uses three types of vacuum chucks that can accommodate all Genesis-flown array fragments in any dimensional shape between 3 and 100 mm in diameter. A sample vacuum chuck, and the manufactured UPW/megasonic nozzle holder, replace the human deficiencies by maintaining a consistent distance between the nozzle and wafer surface as well as allowing for longer cleaning time. The 3- to 5-mm critical distance is important for the ability to remove particles by megasonic cavitations. The increased UPW sonication time and exposure to heated UPW improve the removal of 1- to 5-micron-sized particles.

  6. Towards cleaner technologies via heterogeneous catalytic oxidation

    SciTech Connect

    Tasi, M.; Lednor, P.W.; Grift, C.J.G. van der

    1995-12-31

    In order to solve the environmental problems of many conventional processes and to secure the future of the chemical industry, a great deal of today`s research efforts is devoted to develop cleaner technologies. Oxidation/reduction is simply one of the most important tools to achieve such targets. On one hand, the challenging task is to develop such processes, where molecular oxygen can be economically utilized thereby minimising waste and/or the number of process steps. On the other hand, effluents already formed have to be efficiently treated to end up in products harmless for the environment. Both aspects are being actively pursued within Shell, for which examples will be given. Development and application of a versatile heterogeneous catalyst system will be discussed, that can be used to transform lower olefins to the corresponding aldehyde or ketone derivatives with very high, well above 90% selectivities in a gasphase oxidation process, as well as to effectively reduce nitrogen oxides in effluent gases.

  7. Changes in seasonal mean maximum air temperature in Romania and their connection with large-scale circulation

    NASA Astrophysics Data System (ADS)

    Tomozeiu, Rodica; Busuioc, Aristita; Stefan, Sabina

    2002-08-01

    This paper investigates the temporal and spatial variability of the seasonal mean of maximum air temperature in Romania and its links with the large-scale atmospheric circulation. The Romanian data sets are represented by time series at 14 stations. The large-scale parameters are represented by the observed sea-level pressure (SLP) and geopotential height at 500 hPa (Z500). The period analysed was 1922-98 for winter and 1960-98 for all seasons. Before analysis, the original temperature data were tested to detect for inhomogeneity using the standard normal homogeneity test. Empirical orthogonal functions (EOFs) were used to analyse the spatial and temporal variability of the local and large-scale parameters and to eliminate noise from the original data set. The time series associated with the first EOF pattern of the SLP and mean maximum temperature in Romania were analysed from trend and shifts point of view using the Pettitt and Mann-Kendall tests respectively. The covariance map computed using the Z500 and the seasonal mean of maximum temperature in Romania were used as additional methods to identify the large-scale circulation patterns influencing the local variability.Significant increasing trends were found for winter and summer mean maximum temperature in Romania, with upward shifts around 1947 and 1985 respectively. During autumn, a decreasing trend with a downward shift around 1969 was detected. These changes seem to be real, since they are connected to similar changes in the large-scale circulation. So, the intensification of the southwesterly circulation over Europe since 1933 overlapped with the enhancement of westerly circulation after the 1940s could be the reason for the change in winter mean maximum temperature. The slight weakening of the southwesterly circulation during autumn could be one of the reasons for the decrease in the regime of the mean maximum temperature for autumn seasons. Additionally, the covariance map technique reveals the

  8. Effects of the 7-8-year cycle in daily mean air temperature as a cross-scale information transfer

    NASA Astrophysics Data System (ADS)

    Jajcay, Nikola; Hlinka, Jaroslav; Paluš, Milan

    2015-04-01

    Using a novel nonlinear time-series analysis method, an information transfer from larger to smaller scales of the air temperature variability has been observed in daily mean surface air temperature (SAT) data from European stations as the influence of the phase of slow oscillatory phenomena with periods around 6-11 years on amplitudes of the variability characterized by smaller temporal scales from a few months to 4-5 years [1]. The strongest effect is exerted by an oscillatory mode with the period close to 8 years and its influence can be seen in 1-2 °C differences of the conditional SAT means taken conditionally on the phase of the 8-year cycle. The size of this effect, however, changes in space and time. The changes in time are studied using sliding window technique, showing that the effect evolves in time, and during the last decades the effect is stronger and significant. Sliding window technique was used along with seasonal division of the data, and it has been found that the cycle is most pronounced in the winter season. Different types of surrogate data are applied in order to establish statistical significance and distinguish the effect of the 7-8-yr cycle from climate variability on shorter time scales. [1] M. Palus, Phys. Rev. Lett. 112 078702 (2014) This study is supported by the Ministry of Education, Youth and Sports of the Czech Republic within the Program KONTAKT II, Project No. LH14001.

  9. Assessment of Nanoparticle Exposure in Nanosilica Handling Process: Including Characteristics of Nanoparticles Leaking from a Vacuum Cleaner

    PubMed Central

    KIM, Boowook; KIM, Hyunwook; YU, Il Je

    2013-01-01

    Nanosilica is one of the most widely used nanomaterials across the world. However, their assessment data on the occupational exposure to nanoparticles is insufficient. The present study performed an exposure monitoring in workplace environments where synthetic powders are prepared using fumed nanosilica. Furthermore, after it was observed during exposure monitoring that nanoparticles were emitted through leakage in a vacuum cleaner (even with a HEPA-filter installed in it), the properties of the leaked nanoparticles were also investigated. Workers were exposed to high-concentration nanosilica emitted into the air while pouring it into a container or transferring the container. The use of a vacuum cleaner with a leak (caused by an inadequate sealing) was found to be the origin of nanosilica dispersion in the indoor air. While the particle size of the nanosilica that emitted into the air (during the handling of nanosilica by a worker) was mostly over 100 nm or several microns (µm) due to the coagulation of particles, the size of nanosilica that leaked out of vacuum cleaner was almost similar to the primary size (mode diameter 11.5 nm). Analysis of area samples resulted in 20% (60% in terms of peak concentration) less than the analysis of the personals sample. PMID:24366536

  10. Pneumatic colon injury following high pressure blow gun dust cleaner spray to the perineum

    PubMed Central

    Sy, Edgar D.; Chiu, Yin-I.; Shan, Yan-Shen; Ong, Roger L.

    2014-01-01

    Introduction A pneumatic tool or air tool such as blow gun dust cleaner is a tool driven by compressed air and spraying of the perineum can insufflate the colon due to its high pressure and high flow rate. Presentation of case We present a case of 4 year old boy who developed sudden onset of tense abdominal distention and developed peritonitis. Patient’s family initially denied a history of trauma. Radiologic examination showed pneumoperitoneum and colon dilatation. Exploratory laparotomy revealed a tension pneumoperitoneum, bloody ascitic fluid, multiple site of ecchymosis and serosal tear of the colon and a minute perforation of transverse colon. Postoperative reinvestigation revealed that the patient’s perineum was sprayed, using blow gun dust cleaner. Discussion Air from pneumatic tools produces column of air at pressure of 3.5–8.8 kg/cm2 and pressure greater than the resting anal pressure of 0.109 kg/cm2 force air to enter the colon when the perineum is sprayed. Different degree of colon injury results when airflow is greater than 1.46 L/m, and/or intraluminal pressure greater than 0.109 kg/cm2. In most children, initial anxiety to tell the truth result in difficulty to obtain good history. Conclusion Spraying of the perianal with excessive pneumatic force of greater than the resting anal pressure and high air flow rate causes multiple site colon injury and tension pneumoperitoneum due to colon perforation. Parent should be caution in children playing with high pressure pneumatic tool, and the importance of history is emphases for early correct diagnosis. PMID:25544492

  11. Hidden Savings from a Cleaner America

    ERIC Educational Resources Information Center

    Kimball, Thomas L.

    1972-01-01

    Need for air and water cleanup campaigns are advocated, allowing taxpayers/consumers financial savings on pollution damages. Estimates show $113./year/family saved on air cleanup by 1976 and $87./year/family saved on water cleanup by 1980. (BL)

  12. Image scoring and cooperation in a cleaner fish mutualism.

    PubMed

    Bshary, Redouan; Grutter, Alexandra S

    2006-06-22

    Humans are highly social animals and often help unrelated individuals that may never reciprocate the altruist's favour. This apparent evolutionary puzzle may be explained by the altruist's gain in social image: image-scoring bystanders, also known as eavesdroppers, notice the altruistic act and therefore are more likely to help the altruist in the future. Such complex indirect reciprocity based on altruistic acts may evolve only after simple indirect reciprocity has been established, which requires two steps. First, image scoring evolves when bystanders gain personal benefits from information gathered, for example, by finding cooperative partners. Second, altruistic behaviour in the presence of such bystanders may evolve if altruists benefit from access to the bystanders. Here, we provide experimental evidence for both of the requirements in a cleaning mutualism involving the cleaner fish Labroides dimidiatus. These cleaners may cooperate and remove ectoparasites from clients or they may cheat by feeding on client mucus. As mucus may be preferred over typical client ectoparasites, clients must make cleaners feed against their preference to obtain a cooperative service. We found that eavesdropping clients spent more time next to 'cooperative' than 'unknown cooperative level' cleaners, which shows that clients engage in image-scoring behaviour. Furthermore, trained cleaners learned to feed more cooperatively when in an 'image-scoring' than in a 'non-image-scoring' situation. PMID:16791194

  13. Dynamic monitoring of the dust pickup efficiency of vacuum cleaners.

    PubMed

    Reponen, Tiina; Trakumas, Saulius; Willeke, Klaus; Grinshpun, Sergey A; Choe, Kyoo T; Friedman, Warren

    2002-01-01

    This study evaluated a new method that uses an optical aerosol photometer for dynamically monitoring dust pickup efficiency during vacuuming. In the first stage of this study the new method was compared with built-in dirt sensors installed by vacuum cleaner manufacturers. Through parallel testing it has been shown that the widely available built-in dirt sensors are not sensitive enough to register small (< 53 microm) dust particles. Therefore, only the optical photometer was used in the rest of the experiments of this study to monitor the dust pickup efficiency while the vacuum cleaner was operated with different nozzles on clean and soiled carpet and vinyl sheet flooring. This method also was used to monitor dust pickup efficiency when vacuuming carpets originating from lead-contaminated homes. The dust pickup efficiencies obtained with the optical aerosol photometer have been compared with the surface lead concentrations found during different stages of cleaning. Results indicate that the dust mass concentration registered with the optical aerosol photometer at the nozzle outlet correlates well with the dust mass collected in the vacuum cleaner filter bag and with the surface lead level. Therefore, dynamic dust pickup monitoring can provide valuable information about the efficiency of cleaning when a vacuum cleaner is used. This suggests that a small aerosol photometer similar to a light-scattering smoke detector would be beneficial in vacuum cleaners used for cleaning surfaces contaminated with leaded dust and biological particles (including allergens). PMID:12570075

  14. Regional Contrasts of the Warming Rate over Land Significantly Depend on the Calculation Methods of Mean Air Temperature

    PubMed Central

    Wang, Kaicun; Zhou, Chunlüe

    2015-01-01

    Global analyses of surface mean air temperature (Tm) are key datasets for climate change studies and provide fundamental evidences for global warming. However, the causes of regional contrasts in the warming rate revealed by such datasets, i.e., enhanced warming rates over the northern high latitudes and the “warming hole” over the central U.S., are still under debate. Here we show these regional contrasts depend on the calculation methods of Tm. Existing global analyses calculate Tm from daily minimum and maximum temperatures (T2). We found that T2 has a significant standard deviation error of 0.23 °C/decade in depicting the regional warming rate from 2000 to 2013 but can be reduced by two-thirds using Tm calculated from observations at four specific times (T4), which samples diurnal cycle of land surface air temperature more often. From 1973 to 1997, compared with T4, T2 significantly underestimated the warming rate over the central U.S. and overestimated the warming rate over the northern high latitudes. The ratio of the warming rate over China to that over the U.S. reduces from 2.3 by T2 to 1.4 by T4. This study shows that the studies of regional warming can be substantially improved by T4 instead of T2. PMID:26198976

  15. Regional Contrasts of the Warming Rate over Land Significantly Depend on the Calculation Methods of Mean Air Temperature

    NASA Astrophysics Data System (ADS)

    Wang, Kaicun; Zhou, Chunlüe

    2015-07-01

    Global analyses of surface mean air temperature (Tm) are key datasets for climate change studies and provide fundamental evidences for global warming. However, the causes of regional contrasts in the warming rate revealed by such datasets, i.e., enhanced warming rates over the northern high latitudes and the “warming hole” over the central U.S., are still under debate. Here we show these regional contrasts depend on the calculation methods of Tm. Existing global analyses calculate Tm from daily minimum and maximum temperatures (T2). We found that T2 has a significant standard deviation error of 0.23 °C/decade in depicting the regional warming rate from 2000 to 2013 but can be reduced by two-thirds using Tm calculated from observations at four specific times (T4), which samples diurnal cycle of land surface air temperature more often. From 1973 to 1997, compared with T4, T2 significantly underestimated the warming rate over the central U.S. and overestimated the warming rate over the northern high latitudes. The ratio of the warming rate over China to that over the U.S. reduces from 2.3 by T2 to 1.4 by T4. This study shows that the studies of regional warming can be substantially improved by T4 instead of T2.

  16. Regional Contrasts of the Warming Rate over Land Significantly Depend on the Calculation Methods of Mean Air Temperature

    NASA Astrophysics Data System (ADS)

    Wang, Kaicun; Zhou, Chunlüe

    2016-04-01

    Global analyses of surface mean air temperature (Tm) are key datasets for climate change studies and provide fundamental evidences for global warming. However, the causes of regional contrasts in the warming rate revealed by such datasets, i.e., enhanced warming rates over the northern high latitudes and the "warming hole" over the central U.S., are still under debate. Here we show these regional contrasts depends on the calculation methods of Tm. Existing global analyses calculated Tm from daily minimum and maximum temperatures (T2). We found that T2 has a significant standard deviation error of 0.23 °C/decade in depicting the regional warming rate from 2000 to 2013 but can be reduced by two-thirds using Tm calculated from observations at four specific times (T4), which samples diurnal cycle of land surface air temperature more often. From 1973 to 1997, compared with T4, T2 significantly underestimated the warming rate over the central U.S. and overestimated the warming rate over the northern high latitudes. The ratio of the warming rate over China to that over the U.S. reduces from 2.3 by T2 to 1.4 by T4. This study shows that the studies of regional warming can be substantially improved by T4 instead of T2.

  17. Regional Contrasts of the Warming Rate over Land Significantly Depend on the Calculation Methods of Mean Air Temperature.

    PubMed

    Wang, Kaicun; Zhou, Chunlüe

    2015-01-01

    Global analyses of surface mean air temperature (T(m)) are key datasets for climate change studies and provide fundamental evidences for global warming. However, the causes of regional contrasts in the warming rate revealed by such datasets, i.e., enhanced warming rates over the northern high latitudes and the "warming hole" over the central U.S., are still under debate. Here we show these regional contrasts depend on the calculation methods of T(m). Existing global analyses calculate T(m) from daily minimum and maximum temperatures (T2). We found that T2 has a significant standard deviation error of 0.23 °C/decade in depicting the regional warming rate from 2000 to 2013 but can be reduced by two-thirds using T(m) calculated from observations at four specific times (T4), which samples diurnal cycle of land surface air temperature more often. From 1973 to 1997, compared with T4, T2 significantly underestimated the warming rate over the central U.S. and overestimated the warming rate over the northern high latitudes. The ratio of the warming rate over China to that over the U.S. reduces from 2.3 by T2 to 1.4 by T4. This study shows that the studies of regional warming can be substantially improved by T4 instead of T2. PMID:26198976

  18. Microbial Contents of Vacuum Cleaner Bag Dust and Emitted Bioaerosols and Their Implications for Human Exposure Indoors

    PubMed Central

    Veillette, Marc; Knibbs, Luke D.; Pelletier, Ariane; Charlebois, Remi; Blais Lecours, Pascale; He, Congrong; Morawska, Lidia

    2013-01-01

    Vacuum cleaners can release large concentrations of particles, both in their exhaust air and from resuspension of settled dust. However, the size, variability, and microbial diversity of these emissions are unknown, despite evidence to suggest they may contribute to allergic responses and infection transmission indoors. This study aimed to evaluate bioaerosol emission from various vacuum cleaners. We sampled the air in an experimental flow tunnel where vacuum cleaners were run, and their airborne emissions were sampled with closed-face cassettes. Dust samples were also collected from the dust bag. Total bacteria, total archaea, Penicillium/Aspergillus, and total Clostridium cluster 1 were quantified with specific quantitative PCR protocols, and emission rates were calculated. Clostridium botulinum and antibiotic resistance genes were detected in each sample using endpoint PCR. Bacterial diversity was also analyzed using denaturing gradient gel electrophoresis (DGGE), image analysis, and band sequencing. We demonstrated that emission of bacteria and molds (Penicillium/Aspergillus) can reach values as high as 1E5 cell equivalents/min and that those emissions are not related to each other. The bag dust bacterial and mold content was also consistent across the vacuums we assessed, reaching up to 1E7 bacterial or mold cell equivalents/g. Antibiotic resistance genes were detected in several samples. No archaea or C. botulinum was detected in any air samples. Diversity analyses showed that most bacteria are from human sources, in keeping with other recent results. These results highlight the potential capability of vacuum cleaners to disseminate appreciable quantities of molds and human-associated bacteria indoors and their role as a source of exposure to bioaerosols. PMID:23934489

  19. Variability of stratospheric mean age of air and of the local effects of residual circulation and eddy mixing

    NASA Astrophysics Data System (ADS)

    Ploeger, F.; Riese, M.; Haenel, F.; Konopka, P.; Müller, R.; Stiller, G.

    2015-01-01

    We analyze the variability of mean age of air (AoA) and of the local effects of the stratospheric residual circulation and eddy mixing on AoA within the framework of the isentropic zonal mean continuity equation. AoA for the period 1988-2013 has been simulated with the Lagrangian chemistry transport model CLaMS driven by ERA-Interim winds and diabatic heating rates. Model simulated AoA in the lower stratosphere shows good agreement with both in situ observations and satellite observations from Michelson Interferometer for Passive Atmospheric Sounding, even regarding interannual variability and changes during the last decade. The interannual variability throughout the lower stratosphere is largely affected by the quasi-biennial-oscillation-induced circulation and mixing anomalies, with year-to-year AoA changes of about 0.5 years. The decadal 2002-2012 change shows decreasing AoA in the lowest stratosphere, below about 450 K. Above, AoA increases in the Northern Hemisphere and decreases in the Southern Hemisphere. Mixing appears to be crucial for understanding AoA variability, with local AoA changes resulting from a close balance between residual circulation and mixing effects. Locally, mixing increases AoA at low latitudes (40°S-40°N) and decreases AoA at higher latitudes. Strongest mixing occurs below about 500 K, consistent with the separation between shallow and deep circulation branches. The effect of mixing integrated along the air parcel path, however, significantly increases AoA globally, except in the polar lower stratosphere. Changes of local effects of residual circulation and mixing during the last decade are supportive of a strengthening shallow circulation branch in the lowest stratosphere and a southward shifting circulation pattern above.

  20. 76 FR 30545 - Approval of the Clean Air Act, Section 112(l), Authority for Hazardous Air Pollutants...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-26

    ...Pursuant to section 112(l) of the Clean Air Act (``CAA'') and Federal regulations promulgated thereunder, the Maine Department of Environmental Protection (``ME DEP'') submitted a request for approval to implement and enforce the amended ``Chapter 125: Perchloroethylene Dry Cleaner Regulation'' (Maine Dry Cleaner Rule) as a partial substitution for the amended National Emissions Standards for......

  1. Benefits of two mitigation strategies for container vessels: cleaner engines and cleaner fuels.

    PubMed

    Khan, M Yusuf; Giordano, Michael; Gutierrez, James; Welch, William A; Asa-Awuku, A; Miller, J Wayne; Cocker, David R

    2012-05-01

    Emissions from ocean-going vessels (OGVs) are a significant health concern for people near port communities. This paper reports the emission benefits for two mitigation strategies, cleaner engines and cleaner fuels, for a 2010 container vessel. In-use emissions were measured following International Organization for Standardization (ISO) protocols. The overall in-use nitrogen oxide (NO(x)) emission factor was 16.1 ± 0.1 gkW(-1) h(-1), lower than the Tier 1 certification (17 gkW(-1) h(-1)) and significantly lower than the benchmark value of 18.7 gkW(-1) h(-1) commonly used for estimating emission inventories. The in-use particulate matter (PM(2.5)) emission was 1.42 ± 0.04 gkW(-1) h(-1) for heavy fuel oil (HFO) containing 2.51 wt % sulfur. Unimodal (∼30 nm) and bimodal (∼35 nm; ∼75 nm) particle number size distributions (NSDs) were observed when the vessel operated on marine gas oil (MGO) and HFO, respectively. First-time emission measurements during fuel switching (required 24 nautical miles from coastline) showed that concentrations of sulfur dioxide (SO(2)) and particle NSD took ∼55 min to reach steady-state when switching from MGO to HFO and ∼84 min in the opposite direction. Therefore, if OGVs commence fuel change at the regulated boundary, then vessels can travel up to 90% of the distance to the port before steady-state values are re-established. The transient behavior follows a classic, nonlinear mixing function driven by the amount of fuel in day tank and the fuel consumption rate. Hence, to achieve the maximum benefits from a fuel change regulation, fuel switch boundary should be further increased to provide the intended benefits for the people living near the ports. PMID:22468877

  2. Effect of airstream velocity on mean drop diameters of water sprays produced by pressure and air atomizing nozzles. [for combustion studies

    NASA Technical Reports Server (NTRS)

    Ingebo, R. D.

    1977-01-01

    A scanning radiometer was used to determine the effect of airstream velocity on the mean drop diameter of water sprays produced by pressure atomizing and air atomizing fuel nozzles used in previous combustion studies. Increasing airstream velocity from 23 to 53.4 meters per second reduced the Sauter mean diameter by approximately 50 percent with both types of fuel nozzles. The use of a sonic cup attached to the tip of an air assist nozzle reduced the Sauter mean diameter by approximately 40 percent. Test conditions included airstream velocities of 23 to 53.4 meters per second at 293 K and atmospheric pressure.

  3. Air Cleaning Technologies

    PubMed Central

    2005-01-01

    Executive Summary Objective This health technology policy assessment will answer the following questions: When should in-room air cleaners be used? How effective are in-room air cleaners? Are in-room air cleaners that use combined HEPA and UVGI air cleaning technology more effective than those that use HEPA filtration alone? What is the Plasmacluster ion air purifier in the pandemic influenza preparation plan? The experience of severe acute respiratory syndrome (SARS) locally, nationally, and internationally underscored the importance of administrative, environmental, and personal protective infection control measures in health care facilities. In the aftermath of the SARS crisis, there was a need for a clearer understanding of Ontario’s capacity to manage suspected or confirmed cases of airborne infectious diseases. In so doing, the Walker Commission thought that more attention should be paid to the potential use of new technologies such as in-room air cleaning units. It recommended that the Medical Advisory Secretariat of the Ontario Ministry of Health and Long-Term Care evaluate the appropriate use and effectiveness of such new technologies. Accordingly, the Ontario Health Technology Advisory Committee asked the Medical Advisory Secretariat to review the literature on the effectiveness and utility of in-room air cleaners that use high-efficiency particle air (HEPA) filters and ultraviolet germicidal irradiation (UVGI) air cleaning technology. Additionally, the Ontario Health Technology Advisory Committee prioritized a request from the ministry’s Emergency Management Unit to investigate the possible role of the Plasmacluster ion air purifier manufactured by Sharp Electronics Corporation, in the pandemic influenza preparation plan. Clinical Need Airborne transmission of infectious diseases depends in part on the concentration of breathable infectious pathogens (germs) in room air. Infection control is achieved by a combination of administrative, engineering

  4. INDOOR AIR QUALITY MODELING (INDOOR ENVIRONMENT MANAGEMENT BRANCH, AIR POLLUTION PREVENTION AND CONTROL DIVISION, NRMRL)

    EPA Science Inventory

    The Indoor Environment Management Branch of NRMRL's Air Pollution Prevention and Control Division in Research Triangle Park, NC, has developed an indoor air quality (IAQ) model for analyzing the impact of sources, sinks, ventilation, and air cleaners on indoor air quality. Early ...

  5. Development of a high-capacity extractor cleaner for cotton strippers

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Cotton strippers have used extractor type cleaners for many years to remove large foreign material from harvested seed cotton. These machines are commonly referred to as "field cleaners" and are similar in design and operation to stick machines used in gins. The field cleaners used on modern cotton ...

  6. Multibar sawless lint cleaner: fiber quality analysis after 3rd year of field testing

    Technology Transfer Automated Retrieval System (TEKTRAN)

    After two years of field testing a prototype spiked-tooth lint cleaner, the Multibar Sawless Lint Cleaner (MBSLC), a final year of field evaluation was conducted at commercial cotton gin in West Texas located approximately 30 miles Southwest of Lubbock, Texas.The cotton lint cleaner was tested in a ...

  7. MODELING AIR TOXICS AND PM 2.5 CONCENTRATION FIELDS AS A MEANS FOR FACILITATING HUMAN EXPOSURE ASSESSMENTS

    EPA Science Inventory

    The capability of the US EPA Models-3/Community Multiscale Air Quality (CMAQ) modeling system is extended to provide gridded ambient air quality concentration fields at fine scales. These fields will drive human exposure to air toxics and fine particulate matter (PM2.5) models...

  8. U.S. EPA POLLUTION PREVENTION AND CLEANER PRODUCTION TOOLS

    EPA Science Inventory

    This presentation was made at the 2002 annual meeting of the NATO CCMS Pilot Study on Clean Products and Processes, held on May 12-16, 2002 in Vilnius, Lithuania. The presentation covered six pollution prevention and cleaner production tools developed by NRMRL.

  9. 7 CFR 3201.72 - Oven and grill cleaners.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 15 2014-01-01 2014-01-01 false Oven and grill cleaners. 3201.72 Section 3201.72 Agriculture Regulations of the Department of Agriculture (Continued) OFFICE OF PROCUREMENT AND PROPERTY MANAGEMENT, DEPARTMENT OF AGRICULTURE GUIDELINES FOR DESIGNATING BIOBASED PRODUCTS FOR FEDERAL PROCUREMENT Designated Items § 3201.72 Oven and...

  10. 7 CFR 2902.48 - General purpose household cleaners.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false General purpose household cleaners. 2902.48 Section 2902.48 Agriculture Regulations of the Department of Agriculture (Continued) OFFICE OF ENERGY POLICY... to clean multiple common household surfaces. This designated item does not include products that...

  11. 7 CFR 2902.48 - General purpose household cleaners.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 15 2011-01-01 2011-01-01 false General purpose household cleaners. 2902.48 Section 2902.48 Agriculture Regulations of the Department of Agriculture (Continued) OFFICE OF ENERGY POLICY... to clean multiple common household surfaces. This designated item does not include products that...

  12. Determination of Ammonia in Household Cleaners: An Instrumental Analysis Experiment.

    ERIC Educational Resources Information Center

    Graham, Richard C.; DePew, Steven

    1983-01-01

    Briefly discusses three techniques for assessing amount of ammonia present in household cleaners. Because of disadvantages with these methods, the thermometric titration technique is suggested in which students judge the best buy based on relative cost of ammonia present in samples. Laboratory procedures, typical results, and reactions involved…

  13. 7 CFR 3201.104 - Metal cleaners and corrosion removers.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ...) Definition. (1) Products that are designed to clean and remove grease, oil, dirt, stains, soils, and rust..., dirt, stains, and soils from stainless steel surfaces. (iii) Other metal cleaners. Products that are designed to clean and remove grease, oil, dirt, stains, and soils from metal surfaces other than...

  14. INNOVATIVE TECHNIQUE TO EVALUATE LINT CLEANER GRID BAR DESIGNS

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Photographic techniques were used to show the path that fibers attached to a gin saw take as they are drawn over a lint cleaner cleaning grid bar. A 1979 study showed that fibers were swept backwards, closer to the saw, as saw speed increased. The angle between the tip of the saw tooth and the fib...

  15. PROCESS AND EQUIPMENT CHANGES FOR CLEANER PRODUCTION IN FEDERAL FACILITIES

    EPA Science Inventory

    The paper discusses process and equipment changes for cleaner production in federal facilities. During the 1990s, DoD and EPA conducted joint research and development, aimed at reducing the discharge of hazardous and toxic pollutants from military production and maintenance faci...

  16. Tunable SrAl2Si2O8: Eu phosphor prepared in air via valence state-controlled means

    NASA Astrophysics Data System (ADS)

    Chen, Jian; Liu, Yangai; Liu, Haikun; Ding, Hao; Fang, Minghao; Huang, Zhaohui

    2015-04-01

    SrAl2Si2O8: xEu (x = 0.5-8%) phosphors were prepared by the high-temperature solid-state reaction in air atmosphere. The phenomenon of Eu2+/Eu3+ coexistence was observed and the color of the SrAl2Si2O8: xEu phosphor could shift from light pink to blue by controllable and reproducible means. Photoluminescence (PL), excitation (PLE) spectra, X-ray photoelectron spectroscopy (XPS), and the fluorescence decay curves were employed to detect the presence of Eu2+ and Eu3+ ions in the compound. Under ultraviolet excitation, the broad band emission peaked at 410 nm originated from the transition of 4f65d-4f7 from Eu2+ and narrow band emissions peaked at 591 nm, 614 nm, 655 nm, and 703 nm are derived from the 4f-4f transition of Eu3+ ions, although the Eu3+ precursors were employed. The reduction mechanism from Eu3+ to Eu2+ in this compound was discussed in detail and verified by photoluminescence properties through changing the addition amount of Eu, temperature rise and holding time.

  17. A novel cleaner production process of citric acid by recycling its treated wastewater.

    PubMed

    Xu, Jian; Su, Xian-Feng; Bao, Jia-Wei; Zhang, Hong-Jian; Zeng, Xin; Tang, Lei; Wang, Ke; Zhang, Jian-Hua; Chen, Xu-Sheng; Mao, Zhong-Gui

    2016-07-01

    In this study, a novel cleaner production process of citric acid was proposed to completely solve the problem of wastewater management in citric acid industry. In the process, wastewater from citric acid fermentation was used to produce methane through anaerobic digestion and then the anaerobic digestion effluent was further treated with air stripping and electrodialysis before recycled as process water for the later citric acid fermentation. This proposed process was performed for 10 batches and the average citric acid production in recycling batches was 142.4±2.1g/L which was comparable to that with tap water (141.6g/L). Anaerobic digestion was also efficient and stable in operation. The average chemical oxygen demand (COD) removal rate was 95.1±1.2% and methane yield approached to 297.7±19.8mL/g TCODremoved. In conclusion, this novel process minimized the wastewater discharge and achieved the cleaner production in citric acid industry. PMID:27054882

  18. COREXIT 9580 shoreline cleaner: Development, application, and status

    SciTech Connect

    Canevari, G.P.; Fiocco, R.J.; Lessard, R.R.; Fingas, M.

    1995-06-01

    This paper will describe research on chemical beach cleaners for treatment of oiled shorelines that was initiated in support of the cleaning activities in Prince William Sound (PWS) following the Valdez oil spill in March 1989. The concept for using beach cleaners for shoreline cleanup is to apply a pre-soak to the weathered crude oil on shore and then flush with sea water to wash the oil into a boomed area for subsequent recovery. Criteria imposed on the use of chemical beach cleaners for the cleanup of the Valdez spill were: (1) effective rock cleaning agents should have very little or no toxicity to marine and terrestrial life, (2) there should be no dispersion of the oil washed from the shoreline into the water column; oil was to be recovered by techniques such as skimming or sorbents, and (3) the agents should be on the EPA National Contingency Plan (NCP) list. A laboratory-scale rock washing test was developed to measure cleaner effectiveness and dispersion. A large number of commercially available formulated products were evaluated, as well as development formulations. The commercial products included all of the available NCP-listed products which could function as cleaners. None of the commercial products completely satisfied all the requirements established by the agencies for beach cleaning. However, a new formula, called COREXIT 9580, consisting of two surfactants and a solvent was developed. It exhibited low fish toxicity, low dispersancy and effective rock cleaning capability. The paper reviews the laboratory and field testing to explore the potential use of the COREXIT 9580 to save and restore oiled vegetation.

  19. Toward cleaner, quieter skies: An international debate

    SciTech Connect

    Aylesworth, H. Jr.

    1997-12-31

    The paper summarizes infrastructure and technology changes in the aerospace industry aimed at reducing fuel consumption and nitrous oxide emissions. Growth of total air traffic is predicted over the next 20 years; however, emissions are predicted to grow less rapidly due to increased fuel efficiency and operational productivity. Engine technology leading to fuel efficiency, reduced emissions, and noise reduction is described. Regulations pertinent to these issues are outlined, and international efforts in these areas are also briefly described. 4 figs.

  20. Low-Pressure Generator Makes Cleanrooms Cleaner

    NASA Technical Reports Server (NTRS)

    2005-01-01

    Scientists at NASA's Kennedy Space Center work in cleanrooms: laboratories with high degrees of cleanliness provided by strict control of particles such as dust, lint, or human skin. They are contaminant-free facilities, where the air is repeatedly filtered, and surfaces are smooth to prevent particles from getting lodged. Technicians working in these environments wear specially designed cleanroom "bunny suits" and booties over their street clothes, as well as gloves and face masks to avoid any contamination that may be imparted from the outside world. Even normal paper is not allowed in cleanrooms, only cleanroom low-particulate paper. These are sensitive environments where precision work, like the production of silicon chips or hard disk drives, is performed. Often in cleanrooms, positive air pressure is used to force particles outside of the isolated area. The air pressure in the Kennedy cleanrooms is monitored using high-accuracy, low-differential pressure transducers that require periodic calibration. Calibration of the transducers is a tricky business. In prior years, the analysis was performed by sending the transducers to the Kennedy Standards Laboratory, where a very expensive cross-floated, labor- intensive, dead-weight test was conducted. In the early 1990s, scientists at Kennedy determined to develop a technique and find equipment to perform qualification testing on new low-differential pressure transducers in an accurate, cost-effective manner onsite, without requiring an environmentally controlled room. They decided to use the highly accurate, cost-effective Setra Model C264 as the test transducer. For qualification testing of the Setra, though, a portable, lower-cost calibrator was needed that could control the differential pressure to a high degree of resolution and transfer the accuracy of the Standards Laboratory testing to the qualification testing. The researchers decided that, to generate the low-differential pressure setpoints needed for

  1. Trochanteric Stress Fracture in a Female Window Cleaner

    PubMed Central

    Lee, Bong-Jin

    2016-01-01

    Stress fractures may occur at various sites in the femur including the head, neck, shaft, supracondylar and condylar regions. To the best of our knowledge, stress fracture occurring in the trochanteric region has not been previously reported. We report here a case of trochanteric stress fracture in a 53-year-old female window cleaner treated with hip nailing without adverse consequences. Careful consideration of this entity is needed when evaluating patients who have repetitive jumping up and down.

  2. Comparative in vitro antimicrobial efficacy of commercial ear cleaners.

    PubMed

    Swinney, Alison; Fazakerley, Jennifer; McEwan, Neil; Nuttall, Tim

    2008-12-01

    The aim of this study was to compare the antimicrobial efficacy of ear cleaners against Staphylococcus intermedius, Pseudomonas aeruginosa and Malassezia pachydermatis. Single isolates of each organism were incubated in duplicate at 38 degrees C for 30 min with each ear cleaner diluted 1/2 to 1/256 in phosphate-buffered saline. Positive and negative controls were included. Aliquots were then incubated for 16-18 h on sheep blood agar (bacteria) or for 3 days on Sabouraud's dextrose agar (Malassezia) at 38 degrees C. The lowest dilutions exhibiting 100% antimicrobial efficacy for S. intermedius were: Cleanaural Dog 1/32; Sancerum 1/16; Otoclean 1/4; EpiOtic 1/2; MalAcetic 1/2; and Triz Plus 1/2. The results for P. aeruginosa were Sancerum and Triz Plus 1/16; Cleanaural Dog and EpiOtic 1/8; Otoclean 1/4; and MalAcetic 1/2. Results for M. pachydermatis were: Cleanaural Dog 1/32; Sancerum, Otoclean, EpiOtic and Triz Plus 1/8; and MalAcetic 1/4. Cleanaural Cat, MalAcetic HC and Triz EDTA did not display any antimicrobial activity at any dilution. Antimicrobial activity appeared to be associated with the presence of isopropyl alcohol, parachlorometaxylenol and a low pH. The results of this study may help clinicians make evidence-based decisions when selecting ear cleaners for use in individual cases. PMID:19055612

  3. Biting cleaner fish use altruism to deceive image-scoring client reef fish.

    PubMed Central

    Bshary, Redouan

    2002-01-01

    Humans are more likely to help those who they have observed helping others previously. Individuals may thus benefit from being altruistic without direct reciprocity of recipients but due to gains in 'image' and associated indirect reciprocity. I suggest, however, that image-scoring individuals may be exploitable by cheaters if pay-offs vary between interactions. I illustrate this point with data on cleaner-client reef fish interactions. I show the following: (i) there is strong variation between cleaners with respect to cheating of clients (i.e. feeding on client tissue instead of parasites); (ii) clients approach cleaners, that they observe cooperating with their current client and avoid cleaners that they observe cheating; (iii) cleaners that cheat frequently are avoided more frequently than more cooperative cleaners (iv) cleaners that cheat frequently behave altruistically towards their smallest client species; (v) altruistic acts are followed by exploitative interactions. Thus, it appears that cleaners indeed have an image score, which selects for cooperative cleaners. However, cheating cleaners use altruism in potentially low-pay-off interactions to deceive and attract image-scoring clients that will be exploited. PMID:12396482

  4. Biting cleaner fish use altruism to deceive image-scoring client reef fish.

    PubMed

    Bshary, Redouan

    2002-10-22

    Humans are more likely to help those who they have observed helping others previously. Individuals may thus benefit from being altruistic without direct reciprocity of recipients but due to gains in 'image' and associated indirect reciprocity. I suggest, however, that image-scoring individuals may be exploitable by cheaters if pay-offs vary between interactions. I illustrate this point with data on cleaner-client reef fish interactions. I show the following: (i) there is strong variation between cleaners with respect to cheating of clients (i.e. feeding on client tissue instead of parasites); (ii) clients approach cleaners, that they observe cooperating with their current client and avoid cleaners that they observe cheating; (iii) cleaners that cheat frequently are avoided more frequently than more cooperative cleaners (iv) cleaners that cheat frequently behave altruistically towards their smallest client species; (v) altruistic acts are followed by exploitative interactions. Thus, it appears that cleaners indeed have an image score, which selects for cooperative cleaners. However, cheating cleaners use altruism in potentially low-pay-off interactions to deceive and attract image-scoring clients that will be exploited. PMID:12396482

  5. Study Case of Air-Mass Modification over Poland and Romania Observed by the Means of Multiwavelength Raman Depolarization Lidars

    NASA Astrophysics Data System (ADS)

    Costa-Surós, Montserrat; Janicka, Lucja; Stachlewska, Iwona S.; Nemuc, Anca; Talianu, Camelia; Heese, Birgit; Engelmann, Ronny

    2016-06-01

    An air-mass modification, on its way from Poland to Romania, observed between 19-21 July 2014 is discussed. The air-mass was investigated using data of two multi-wavelength lidars capable of performing regular elastic, depolarization and Raman measurements in Warsaw, Poland, and in Magurele, Romania. The analysis was focused on evaluating optical properties of aerosol in order to search for similarities and differences in the vertical profiles describing the atmospheric layers above the two stations within given period.

  6. The induction of water to the inlet air as a means of internal cooling in aircraft-engine cylinders

    NASA Technical Reports Server (NTRS)

    Rothrock, Addison M; Krsek, Alois, Jr; Jones, Anthony W

    1943-01-01

    Report presents the results of investigations conducted on a full-scale air-cooled aircraft-engine cylinder of 202-cubic inch displacement to determine the effects of internal cooling by water induction on the maximum permissible power and output of an internal-combustion engine. For a range of fuel-air and water-fuel ratios, the engine inlet pressure was increased until knock was detected aurally, the power was then decreased 7 percent holding the ratios constant. The data indicated that water was a very effective internal coolant, permitting large increases in engine power as limited by either knock or by cylinder temperatures.

  7. Validation of road traffic urban emission inventories by means of concentration data measured at air quality monitoring stations in Europe

    NASA Astrophysics Data System (ADS)

    Mellios, Giorgos; Van Aalst, Roel; Samaras, Zissis

    A method has been developed to validate inventories of urban emissions from road transport using air quality measurements. To this aim atmospheric concentration data for CO, NO x and PM 10 measured at urban traffic stations in five European countries, retrieved from the European Air Quality Information System AirBase, have been analysed. Traffic emission ratios as derived from this analysis were compared to estimates of emission ratios as provided by a suitable emissions model (TRENDS). The comparison shows a fair agreement for the CO over NO x ratio on a country level, suggesting that the measured concentrations indeed dominantly originate from traffic-related emissions. On the other hand, the NO x over PM 10 and PM 10 over CO emission ratios estimated by TRENDS are over- and underestimated, respectively, as compared to the respective average measured ratio. These discrepancies may be attributed to the fact that modelled PM 10 emissions do not account for particles originating from non-exhaust sources. Modelled ratios have confirmed the observed weekday and year dependence of the ratios. A sensitivity analysis on the CO over NO x ratio has shown that small changes in the share of mileage allocated to urban driving by different vehicle categories result in significant changes in the emission ratio. Appropriate re-allocations of the urban shares, especially for diesel vehicles, enabled the calibration of the TRENDS model against air quality data collected at various monitoring sites in different countries. In order to further improve the consistency of the method, more information on ambient air PM 2.5 mass concentrations needs to be collected from the monitoring stations and PM 10 emission factors from primary non-exhaust sources (including gasoline-fuelled vehicles) need to be incorporated into TRENDS.

  8. Air Quality Analysis by Using Fuzzy Inference System and Fuzzy C-mean Clustering in Tehran, Iran from 2009–2013

    PubMed Central

    HAMEDIAN, Amir Abbas; JAVID, Allahbakhsh; MOTESADDI ZARANDI, Saeed; RASHIDI, Yousef; MAJLESI, Monireh

    2016-01-01

    Background: Since the industrial revolution, the rate of industrialization and urbanization has increased dramatically. Regarding this issue, specific regions mostly located in developing countries have been confronted with serious problems, particularly environmental problems among which air pollution is of high importance. Methods: Eleven parameters, including CO, SO2, PM10, PM2.5, O3, NO2, benzene, toluene, ethyl-benzene, xylene, and 1,3-butadiene, have been accounted over a period of two years (2011–2012) from five monitoring stations located at Tehran, Iran, were assessed by using fuzzy inference system and fuzzy c-mean clustering. Results: These tools showed that the quality of criteria pollutants between the year 2011 and 2012 did not as much effect the public health as the other pollutants did. Conclusion: Using the air EPA AQI, the quality of air, and also the managerial plans required to improve the quality can be misled. PMID:27516999

  9. Study of the homogeneity of the current distribution in a dielectric barrier discharge in air by means of a segmented electrode

    NASA Astrophysics Data System (ADS)

    Malashin, M. V.; Moshkunov, S. I.; Khomich, V. Yu.

    2016-02-01

    The current distribution in a dielectric barrier discharge in atmospheric-pressure air at a natural humidity of 40-60% was studied experimentally with a time resolution of 200 ps. The experimental results are interpreted by means of numerically simulating the discharge electric circuit. The obtained results indicate that the discharge operating in the volumetric mode develops simultaneously over the entire transverse cross section of the discharge gap.

  10. Regenerating using aqueous cleaners with ozone and electrolysis

    NASA Technical Reports Server (NTRS)

    Mcginness, Michael P.

    1994-01-01

    A new process converts organic oil and grease contaminates in used water based cleaners into synthetic surfactants. This permits the continued use of a cleaning solution long after it would have been dumped using previously known methods. Since the organic soils are converted from contaminates to cleaning compounds the need for frequent bath dumps is totally eliminated. When cleaning solutions used in aqueous cleaning systems are exhausted and ready for disposal, they will always contain the contaminates removed from the cleaned parts and drag-in from prior cleaning steps. Even when the cleaner is biodegradable these contaminants will frequently cause the waste cleaning solution to be a hazardous waste. Chlorinated solvents are rapidly being replaced by aqueous cleaners to avoid the new ozone-depletion product-labeling-law. Many industry standard halocarbon based solvents are being completely phased out of production, and their prices have nearly tripled. Waste disposal costs and cradle-to-grave liability are also major concerns for industry today. This new process reduces the amount of water and chemicals needed to maintain the cleaning process. The cost of waste disposal is eliminated because the water and cleaning compounds are reused. Energy savings result by eliminating the need for energy currently used to produce and deliver fresh water and chemicals as well as the energy used to treat and destroy the waste from the existing cleaning processes. This process also allows the cleaning bath to be maintained at the peak performance of a new bath resulting in decreased cycle times and decreased energy consumption needed to clean the parts. This results in a more efficient and cost effective cleaning process.

  11. Design study of the KAGRA output mode cleaner

    NASA Astrophysics Data System (ADS)

    Kumeta, Ayaka; Bond, Charlotte; Somiya, Kentaro

    2015-02-01

    Most second-generation gravitational-wave detectors employ an optical resonator called an output mode cleaner (OMC), which filters out junk light from the signal and the reference light, before it reaches the detection photodiode located at the asymmetric port of the large-scale interferometer. The optical parameters of the OMC should be carefully chosen to satisfy the requirements to filter out unwanted light whilst transmitting the gravitational-wave signal. We use the simulation program FINESSE and realistic mirror phase maps that have the same surface quality as the KAGRA test masses to find out a proper design of the KAGRA OMC.

  12. The Relationship of Loss, Mean Age of Air and the Distribution of CFC's to Stratospheric Circulation and Implications for Atmospheric Lifetimes

    NASA Technical Reports Server (NTRS)

    Douglas, A. R.; Stolarski, R. S.; Schoeberl, M. R.; Jackman, C. H.; Gupta, M. L.; Newman, P. A.; Nielsen, J. E.; Fleming, E. L.

    2008-01-01

    Model-derived estimates of the annually integrated destruction and lifetime for various ozone depleting substances (ODSs) depend on the simulated stratospheric transport and mixing in the global model used to produce the estimate. Observations in the middle and high latitude lower stratosphere show that the mean age of an air parcel (i.e., the time since its stratospheric entry) is related to the fractional release for the ODs (i.e., the amount of the ODS that has been destroyed relative to the amount at the time of stratospheric entry). We use back trajectory calculations to produce an age spectrum, and explain the relationship between the mean age and the fractional release by showing that older elements in the age spectrum have experienced higher altitudes and greater ODs destruction than younger elements. In our study, models with faster circulations produce distributions for the age-of-air that are 'young' compared to a distribution derived from observations. These models also fail to reproduce the observed relationship between the mean age of air and the fractional release. Models with slower circulations produce both realistic distributions for mean age and a realistic relationship between mean age and fractional release. These models also produce a CFCl3 lifetime of approximately 56 years, longer than the 45 year lifetime used to project future mixing ratios. We find that the use of flux boundary conditions in assessment models would have several advantages, including consistency between ODS evolution and simulated loss even if the simulated residual circulation changes due to climate change.

  13. Air Cleaning Devices for HVAC Supply Systems in Schools. Technical Bulletin.

    ERIC Educational Resources Information Center

    Wheeler, Arthur E.

    Guidelines for maintaining indoor air quality in schools with HVAC air cleaning systems are provided in this document. Information is offered on the importance of air cleaning, sources of air contaminants and indoor pollutants, types of air cleaners and particulate filters used in central HVAC systems, vapor and gas removal, and performance…

  14. The development of the July 1989 1 deg x 1 deg and 30' x 30' terrestrial mean free-air anomaly data bases

    NASA Technical Reports Server (NTRS)

    Kim, Jeong-Hee; Rapp, Richard H.

    1990-01-01

    In June 1986 a 1 x 1 deg/mean free-air anomaly data file containing 48955 anomalies was completed. In August 1986 a 30 x 30 min mean free-air anomaly file was defined containing 31787 values. For the past three years data has been collected to upgrade these mean anomaly files. The primary emphasis was the collection of data to be used for the estimation of 30 min means anomalies in land areas. The emphasis on land areas was due to the anticipated use of 30 min anomalies derived from satellite altimeter data in the ocean areas. There were 10 data sources in the August 1986 file. Twenty-eight sources were added based on the collection of both point and mean anomalies from a number of individuals and organizations. A preliminary 30 min file was constructed from the 38 data sources. This file was used to calculate 1 x 1 deg mean anomalies. This 1 x 1 deg file was merged with a 1 x 1 deg file which was a merger of the June 1986 file plus a 1 x 1 deg file made available by DMA Aerospace Center. Certain bad 30 min anomalies were identified and deleted from the preliminary 30 min file leading to the final 30 min file (the July 1989 30 min file) with 66990 anomalies and their accuracy. These anomalies were used to again compute 1 x 1 deg anomalies which were merged with the previous June 86 DMAAC data file. The final 1 x 1 deg mean anomaly file (the July 89 1 x 1 deg data base) contained 50793 anomalies and their accuracy. The anomaly data files were significantly improved over the prior data sets in the following geographic regions: Africa, Scandinavia, Canada, United States, Mexico, Central and South America. Substantial land areas remain where there is little or no available data.

  15. Sustainable, alternative farming practices as a means to simultaneously secure food production and reduce air pollution in East Asia

    NASA Astrophysics Data System (ADS)

    Tai, A. P. K.; Fung, K. M.; Yong, T.; Liu, X.

    2015-12-01

    Proper agricultural land management is essential for securing food supply and minimizing damage to the environment. Among available farming practices, relay strip intercropping and fertilizer application are commonly used, but to study their wider environmental implications and possible feedbacks we require an Earth system modeling framework. In this study, the effectiveness of a maize-soybean relay strip intercropping system and fertilizer reduction is investigated using a multi-model method. The DNDC (DeNitrification-DeComposition) model is used to simulate agricultural activities and their impacts on the environment through nitrogen emissions and changes in soil chemical composition. Crop yield, soil nutrient content and nitrogen emissions to the atmosphere in major agricultural regions of China are predicted under various cultivation scenarios. The GEOS-Chem global chemical transport model is then used to estimate the effects on downwind particle and ozone air pollution. We show that relay strip intercropping and optimal fertilization not only improve crop productivity, but also retain soil nutrients, reduce ammonia emission and mitigate downwind air pollution. By cutting 25% fertilization inputs but cultivating maize and soybean together in a relay strip intercropping system used with field studies, total crop production was improved slightly by 4.4% compared to monoculture with conventional amount of fertilizers. NH3 volatilization decreases by 29%, equivalent to saving the pollution-induced health damage costs by about US$2.5 billion per year. The possible feedback effects from atmospheric nitrogen deposition onto the croplands are also investigated. We show that careful management and better quantitative understanding of alternative farming practices hold huge potential in simultaneously addressing different global change issues including the food crisis, air pollution and climate change, and calls for greater collaboration between scientists, farmers and

  16. Control of Relative Air Humidity as a Potential Means to Improve Hygiene on Surfaces: A Preliminary Approach with Listeria monocytogenes

    PubMed Central

    Zoz, Fiona; Iaconelli, Cyril; Lang, Emilie; Iddir, Hayet; Guyot, Stéphane; Grandvalet, Cosette; Gervais, Patrick; Beney, Laurent

    2016-01-01

    Relative air humidity fluctuations could potentially affect the development and persistence of pathogenic microorganisms in their environments. This study aimed to characterize the impact of relative air humidity (RH) variations on the survival of Listeria monocytogenes, a bacterium persisting on food processing plant surfaces. To assess conditions leading to the lowest survival rate, four strains of L. monocytogenes (EGDe, CCL500, CCL128, and LO28) were exposed to different RH conditions (75%, 68%, 43% and 11%) with different drying kinetics and then rehydrated either progressively or instantaneously. The main factors that affected the survival of L. monocytogenes were RH level and rehydration kinetics. Lowest survival rates between 1% and 0.001% were obtained after 3 hours of treatment under optimal conditions (68% RH and instantaneous rehydration). The survival rate was decreased under 0.001% after prolonged exposure (16h) of cells under optimal conditions. Application of two successive dehydration and rehydration cycles led to an additional decrease in survival rate. This preliminary study, performed in model conditions with L. monocytogenes, showed that controlled ambient RH fluctuations could offer new possibilities to control foodborne pathogens in food processing environments and improve food safety. PMID:26840373

  17. Impact of a Saw-type Lint Cleaner's Operation on Fiber Quality

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The saw-type lint cleaner is the primary method of cleaning lint at gins. Two one-year studies were conducted to examine fiber quality properties produced by a saw-type lint cleaner in response to variations in: feed rate, saw speed, combing ratio, variety and lint moisture. One hairy-leaf and two...

  18. Saw-Type Lint Cleaner Damage as Related to Saw Speed

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Saw-type lint cleaners are commonly used to improve the overall quality of ginned lint by removing foreign matter and less desirable short fiber. Saw-type lint cleaners inflict damage on some good lint. The removal of foreign matter improves the leaf grade of the lint and removal of short fibers i...

  19. TESTING ANTIMICROBIAL CLEANER EFFICACY ON GYPSUM WALLBOARD CONTAMINATED WITH STACHYBOTRYS CHARTARUM

    EPA Science Inventory

    Reducing occupant exposure to indoor mold growth is the goal of this research, through the efficacy testing of antimicrobial cleaners. Often mold contaminated building materials are not properly removed, but instead surface cleaners are applied in an attempt to alleviate the prob...

  20. Survival and stress responses of E. coli exposed to alkaline cleaners

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Studies were undertaken to evaluate the effects of alkaline cleaners commonly used in food processing environments on survival and stress responses of the foodborne pathogen Escherichia coli O157:H7. Alkaline cleaners containing either sodium hydroxide or potassium hydroxide and hypochlorite had gre...

  1. STUDY OF A WIRE BRUSH GRID BAR REPLACEMENT FOR SAW-TYPE LINT CLEANERS

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Saw type lint cleaners are commonly used to improve the overall quality of ginned lint through the removal of non-lint material and short fibers. A standard saw type lint cleaner is made up of several components: the feed works, saws, and grid bars. Slover Manufacturing (Lamesa, TX) has designed an...

  2. Influence of grid bar shape on field cleaner performance - field testing

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A test was conducted to evaluate the influence of grid bar cross sectional shape on cotton stripper field cleaner performance in terms of cleaning efficiency, seed cotton loss, and fiber and yarn quality. Three field cleaner configurations were tested on a cotton stripper harvester operating under f...

  3. PHOTOCITYTEX - A LIFE project on the air pollution treatment in European urban environments by means of photocatalytic textiles

    NASA Astrophysics Data System (ADS)

    Ródenas, Milagros; Fages, Eduardo; Fatarella, Enrico; Herrero, David; Castagnoli, Lidia; Borrás, Esther; Vera, Teresa; Gómez, Tatiana; Carreño, Javier; López, Ramón; Gimeno, Cristina; Catota, Marlon; Muñoz, Amalia

    2016-04-01

    In urban areas, air pollution from traffic is becoming a growing problem. In recent years the use of titanium dioxide (TiO2) based photocatalytic self-cleaning and de-polluting materials has been considered to remove these pollutants. TiO2 is now commercially available and used in construction material or paints for environmental purposes. Further work, however, is still required to clarify the potential impacts from wider TiO2 use. Specific test conditions are required to provide objective and accurate knowledge. Under the LIFE PHOTOCITYTEX project, the effectiveness of using TiO2-based photocatalytic nanomaterials in building textiles as a way of improving the air quality in urban areas will be assessed. Moreover, information on secondary products formed during the tests will be obtained, yielding a better overall understanding of the whole process and its implications. For this purpose, a series of demonstrations are foreseen, comprising 1. lab-test and development of textile prototypes at lab scale, 2. larger scale demonstration of the use of photocatalytic textiles in the depollution of urban environments employing the EUPHORE chambers to simulate a number of environmental conditions of various European cities and 3. field demonstrations installing the photocatalytic textiles in two urban locations in Quart de Poblet, a tunnel and a school. A one-year extensive passive dosimetric campaign has already being carried out to characterize the selected urban sites before the installation of the photocatalytic textile prototypes, and a similar campaign after their installation is ongoing. Also, more comprehensive intensive active measurement campaigns have been conducted to account for winter and summer conditions. In parallel, lab-tests have already been completed to determine optimal photocatalytic formulations on textiles, followed by experiments at EUPHORE. Information on the deployment of the campaigns is given together with laboratory conclusions and first

  4. Whole house particle removal and clean air delivery rates for in-duct and portable ventilation systems.

    PubMed

    Macintosh, David L; Myatt, Theodore A; Ludwig, Jerry F; Baker, Brian J; Suh, Helen H; Spengler, John D

    2008-11-01

    A novel method for determining whole house particle removal and clean air delivery rates attributable to central and portable ventilation/air cleaning systems is described. The method is used to characterize total and air-cleaner-specific particle removal rates during operation of four in-duct air cleaners and two portable air-cleaning devices in a fully instrumented test home. Operation of in-duct and portable air cleaners typically increased particle removal rates over the baseline rates determined in the absence of operating a central fan or an indoor air cleaner. Removal rates of 0.3- to 0.5-microm particles ranged from 1.5 hr(-1) during operation of an in-duct, 5-in. pleated media filter to 7.2 hr(-1) for an in-duct electrostatic air cleaner in comparison to a baseline rate of 0 hr(-1) when the air handler was operating without a filter. Removal rates for total particulate matter less than 2.5 microm in aerodynamic diameter (PM2.5) mass concentrations were 0.5 hr(-1) under baseline conditions, 0.5 hr(-1) during operation of three portable ionic air cleaners, 1 hr(-1) for an in-duct 1-in. media filter, 2.4 hr(-1) for a single high-efficiency particle arrestance (HEPA) portable air cleaner, 4.6 hr(-1) for an in-duct 5-in. media filter, 4.7 hr(-1) during operation of five portable HEPA filters, 6.1 hr(-1) for a conventional in-duct electronic air cleaner, and 7.5 hr(-1) for a high efficiency in-duct electrostatic air cleaner. Corresponding whole house clean air delivery rates for PM2.5 attributable to the air cleaner independent of losses within the central ventilation system ranged from 2 m3/min for the conventional media filter to 32 m3/min for the high efficiency in-duct electrostatic device. Except for the portable ionic air cleaner, the devices considered here increased particle removal indoors over baseline deposition rates. PMID:19044163

  5. 19. MILL NO. 1, 3rd FLOOR, CEILING TRACKING WITH AIR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. MILL NO. 1, 3rd FLOOR, CEILING TRACKING WITH AIR CLEANER (BLEW DUST/LINT DOWNWARD WHILE TRAVELING ON TRACK OVER MILL MACHINERY). - Prattville Manufacturing Company, Number One, 242 South Court Street, Prattville, Autauga County, AL

  6. Cleaner cooking solutions to achieve health, climate, and economic cobenefits.

    PubMed

    Anenberg, Susan C; Balakrishnan, Kalpana; Jetter, James; Masera, Omar; Mehta, Sumi; Moss, Jacob; Ramanathan, Veerabhadran

    2013-05-01

    Nearly half the world's population must rely on solid fuels such as biomass (wood, charcoal, agricultural residues, and animal dung) and coal for household energy, burning them in inefficient open fires and stoves with inadequate ventilation. Household solid fuel combustion is associated with four million premature deaths annually; contributes to forest degradation, loss of habitat and biodiversity, and climate change; and hinders social and economic progress as women and children spend hours every day collecting fuel. Several recent studies, as well as key emerging national and international efforts, are making progress toward enabling wide-scale household adoption of cleaner and more efficient stoves and fuels. While significant challenges remain, these efforts offer considerable promise to save lives, improve forest sustainability, slow climate change, and empower women around the world. PMID:23551030

  7. Evolution and diversification of National Cleaner Production Centres (NCPCs).

    PubMed

    Van Berkel, Rene

    2010-07-01

    Since 1994 UNIDO and UNEP cooperate in a Programme to establish National Cleaner Production Centres (NCPCs) as a mechanism for delivery of Cleaner Production (CP) services to businesses, governments and other organisations. In 2007, 38 NCPCs were operational in 37 developing and transition countries. While initially set up in near-identical ways in each country, over time NCPCs evolved in response to both programme-internal and country-level factors. The resulting diversity among NCPCs is described and analysed here. Differentiation and specialisation had occurred in service areas or topics both within and between NCPCs, however without a clear strategy for integration and synergy. NCPCs were becoming part of expanding networks of business services providers nationally forcing some to focus on audit and training services (tier 1), and others on specialist services in CP technology and/or policy (tier 2) and/or networking services (tier 3). All NCPCs were on a trajectory from a project management organisation to a nationally-owned entity. The different management requirements were not proactively managed and technical aspects of CP service delivery overshadowed institutional and governance aspects of establishing and operating the NCPC institution. Differences in service delivery methods between NCPCs are most evident in three service areas: CP assessments; policy advice; and transfer of Environmentally Sound Technologies. It is argued here that understanding root causes and benefits of this presently-observed differentiation, could lay the foundation for capturing and advancing best practice CP concepts, methods and policies. This in turn would enable strategic planning for customised interventions and support at the national level. PMID:20346575

  8. Spatial downscaling and mapping of daily precipitation and air temperature using daily station data and monthly mean maps

    NASA Astrophysics Data System (ADS)

    Flint, A. L.; Flint, L. E.; Stern, M. A.

    2013-12-01

    Accurate maps of daily weather variables are an essential component of hydrologic and ecologic modeling. Here we present a four-step method that uses daily station data and transient monthly maps of precipitation and air temperature. This method uses the monthly maps to help interpolate between stations for more accurate production of daily maps at any spatial resolution. The first step analyzes the quality of the each station's data using a discrepancy analysis that compares statistics derived from a statistical jack-knifing approach with a time-series evaluation of discrepancies generated for each station. Although several methods could be used for the second step of producing initial maps, such as kriging, splines, etc., we used a gradient plus inverse distance squared method that was developed to produce accurate climate maps for sparse data regions with widely separated and few climate stations, far fewer than would be needed for techniques such as kriging. The gradient plus inverse distance squared method uses local gradients in the climate parameters, easting, northing, and elevation, to adjust the inverse distance squared estimates for local gradients such as lapse rates, inversions, or rain shadows at scales of 10's of meters to kilometers. The third step is to downscale World Wide Web (web) based transient monthly data, such as Precipitation-Elevation Regression on Independent Slope Method (PRISM) for the US (4 km or 800 m maps) or Climate Research Unit (CRU 3.1) data sets (40 km for global applications) to the scale of the daily data's digital elevation model. In the final step the downscaled transient monthly maps are used to adjust the daily time-series mapped data (~30 maps/month) for each month. These adjustments are used to scale daily maps so that summing them for precipitation or averaging them for temperature would more accurately reproduce the variability in selected monthly maps. This method allows for individual days to have maxima or minima

  9. Three-dimensional Simulations of the Mean Air Transport During the 1997 Forest Fires in Kalimantan, Indonesia Using a Mesoscale Numerical Model

    NASA Astrophysics Data System (ADS)

    Roswintiarti, O.; Raman, S.

    - This paper describes the meteorological processes responsible for the mean transport of air pollutants during the ENSO-related forest fires in Kalimantan, Indonesia from 00 UTC 21 September to 00 UTC 25 September, 1997. The Fifth Generation of the Pennsylvania State University-National Center for Atmospheric Research (PSU-NCAR) Mesoscale Model (MM5) is used to simulate three-dimensional winds at 6-hourly intervals. A nonhydrostatic version of the model is run using two nested grids with horizontal resolutions of 45 km and 15 km. From the simulated wind fields, the backward and forward trajectories of the air parcel are investigated using the Vis5D model.The results indicate that the large-scale subsidence over Indonesia, the southwest monsoon low-level flows (2-8 m s-1), and the shallow planetary boundary layer height (400-800 m) play a key role in the transport of air pollutants from Kalimantan to Malaysia, Singapore and Brunei.

  10. AUTOMOTIVE DIESEL MAINTENANCE 1. UNIT II, MAINTAINING THE AIR SYSTEM--DETROIT DIESEL ENGINES.

    ERIC Educational Resources Information Center

    Human Engineering Inst., Cleveland, OH.

    THIS MODULE OF A 30-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF THE OPERATION AND MAINTENANCE OF THE DIESEL ENGINE AIR SYSTEM. TOPICS ARE (1) OPERATION AND FUNCTION, (2) AIR CLEANER, (3) AIR SHUT-DOWN HOUSING, (4) EXHAUST SYSTEM, (5) BLOWER, (6) TURBOCHARGER, AND (7) TROUBLE-SHOOTING TIPS ON THE AIR SYSTEM. THE MODULE CONSISTS OF A…

  11. Adult Cleaner Wrasse Outperform Capuchin Monkeys, Chimpanzees and Orang-utans in a Complex Foraging Task Derived from Cleaner – Client Reef Fish Cooperation

    PubMed Central

    Proctor, Darby; Essler, Jennifer; Pinto, Ana I.; Wismer, Sharon; Stoinski, Tara; Brosnan, Sarah F.; Bshary, Redouan

    2012-01-01

    The insight that animals' cognitive abilities are linked to their evolutionary history, and hence their ecology, provides the framework for the comparative approach. Despite primates renowned dietary complexity and social cognition, including cooperative abilities, we here demonstrate that cleaner wrasse outperform three primate species, capuchin monkeys, chimpanzees and orang-utans, in a foraging task involving a choice between two actions, both of which yield identical immediate rewards, but only one of which yields an additional delayed reward. The foraging task decisions involve partner choice in cleaners: they must service visiting client reef fish before resident clients to access both; otherwise the former switch to a different cleaner. Wild caught adult, but not juvenile, cleaners learned to solve the task quickly and relearned the task when it was reversed. The majority of primates failed to perform above chance after 100 trials, which is in sharp contrast to previous studies showing that primates easily learn to choose an action that yields immediate double rewards compared to an alternative action. In conclusion, the adult cleaners' ability to choose a superior action with initially neutral consequences is likely due to repeated exposure in nature, which leads to specific learned optimal foraging decision rules. PMID:23185293

  12. An Analysis of Simulated and Observed Global Mean Near-Surface Air Temperature Anomalies from 1979 to 1999: Trends and Attribution of Causes

    NASA Technical Reports Server (NTRS)

    MacKay, R. M.; Ko, M. K. W.

    2001-01-01

    The 1979 - 1999 response of the climate system to variations in solar spectral irradiance is estimated by comparing the global averaged surface temperature anomalies simulated by a 2D (two dimensional) energy balance climate model to observed temperature anomalies. We perform a multiple regression of southern oscillation index and the individual model responses to solar irradiance variations, stratospheric and tropospheric aerosol loading, stratospheric ozone trends, and greenhouse gases onto each of five near-surface temperature anomaly data sets. We estimate the observed difference in global mean near surface air temperature attributable to the solar irradiance difference between solar maximum and solar minimum to be between 0.06 and 0.11 K, and that 1.1 - 3.8% of the total variance in monthly mean near-surface air temperature data is attributable to nations in solar spectral irradiance. For the five temperature data sets used in our analysis, the trends in raw monthly mean temperature anomaly data have a large range, spanning a factor of 3 from 0.06 to 0.17 K/decade. However. our analysis suggests that trends in monthly temperature anomalies attributable to the combination of greenhouse gas, stratospheric ozone, and tropospheric sulfate aerosol variations are much more consistent among data sets, ranging from 0.16 to 0.24 K/decade. Our model results suggest that roughly half of the warming from greenhouse gases is cancelled by the cooling from changes in stratospheric ozone. Tropospheric sulfate aerosol loading in the present day atmospheric contributes significantly to the net radiative forcing of the present day climate system. However, because the change in magnitude and latitudinal distribution of tropospheric sulfate aerosol has been small over the past 20 years, the change in the direct radiative forcing attributable to changes in aerosol loading over this time is also small.

  13. Cooking fuels and the push for cleaner alternatives: a case study from Burkina Faso

    PubMed Central

    Yamamoto, Shelby; Sié, Ali; Sauerborn, Rainer

    2009-01-01

    Introduction More than 95% of the population in Burkina Faso uses some form of solid biomass fuel. When these fuels are burned in traditional, inefficient stoves, pollutant levels within and outside the home can be very high. This can have important consequences for both health and climate change. Thus, the push to switch to cleaner burning fuels is advantageous. However, there are several considerations that need to be taken into account when considering the use and promotion of different fuel types. Objective In the setting of the semi-urban area of Nouna, Burkina Faso, we examine the common fuel types used (wood, charcoal and liquid petroleum gas (LPG)) in terms of consumption, energy, availability, air pollution and climate change. Results and conclusion Although biomass solid fuel does offer some advantages over LPG, the disadvantages make this option much less desirable. Lower energy efficiencies, higher pollutant emission levels, the associated health consequences and climate change effects favour the choice of LPG over solid biomass fuel use. Further studies specific to Burkina Faso, which are lacking in this region, should also be undertaken in this area to better inform policy decisions. PMID:22778710

  14. Change in NO2 reveals Parade Blue is cleaner than APEC Blue

    NASA Astrophysics Data System (ADS)

    Liu, Haoran; Liu, Cheng; Xie, Zhouqing; Xie, Pinhua; Xing, Chengzhi; Xu, Jin; Liu, Jianguo

    2016-04-01

    The spectacular Parade Blue (blue sky), and APEC Blue (blue sky) were renowned worldwide caused by the limiting discharge policy of the Chinese government. For evaluating the reduction of these two events, we analyzed the variation of NO2 columns Beijing by looking at a long-term monitoring using Multi-Axis Differential Optical Absorption Spectroscopy (MAX-DOAS) and the Ozone Monitoring Instrument (OMI) satellite observations from August 2014 to November 2015, covering Grand Military Parade (GMP, September 2015) and APEC (November 2014) period. We found that the NO2 columns abruptly decreased both GMP and APEC. However, change in the MAX-DOAS and the OMI NO2 during GMP was larger than during APEC via comparison with the same period in 2014, indicating Parade Blue is cleaner than APEC Blue. The spatial distribution of NO2 and backward trajectories together with meterological parameters suggested that GMP Blue may be due to the regional significant decreasing discharge in peripheral cities. No weekend effect during GMP further confirmed the role of controlling discharge. This study provides direct evidence that it is possible to clean air in China.

  15. The effect of debris accumulation on and filter resistance to airflow for four commercially available vacuum cleaners.

    PubMed

    Heitbrink, William A; Santalla-Elias, Javier

    2009-06-01

    Mortar removal with right-angle grinders can cause excessive exposure to respirable crystalline silica. To control this dust exposure, vacuum cleaners need to exhaust 2.3 m(3)/min (80 cubic feet per minute) from the grinder's exhaust hood. Maintaining this airflow while collecting as much as 15.9 kg (35 lb) of debris in the vacuum cleaner has been problematic. A laboratory study was conducted to evaluate how mortar debris affects vacuum cleaner airflow and filter pressure loss. Four vacuum cleaners were tested. Two of the vacuum cleaners used vacuum cleaner bags as a prefilter; the other two vacuum cleaners used cyclones to reduce the amount of debris that reaches the filter. Test debris was collected by a masonry restoration contractor during actual mortar removal using a grinder fitted with a hood. The hood is attached to a vacuum cleaner with cyclonic pre-separation. The vacuum cleaner fan curves were obtained experimentally to learn how pressure loss affects vacuum cleaner airflows. Then, 15.9 kg (35 lb) of mortar removal debris was sucked into the vacuum cleaner in 2.27-kg (5-lb) increments. Before and after adding each 2.27-kg (5-lb) increment of debris, vacuum cleaner airflows were measured with a venturi meter, and vacuum cleaner static pressures were measured at the inlet to the vacuum cleaner motor, and before and after each filter. The vacuum cleaners equipped with cyclonic pre-separation were unaffected by the mass of debris collected in the vacuum cleaner and were able to maintain airflows in excess of 1.98 m(3)/min (70 cfm) throughout the testing program. As debris accumulated in the vacuum cleaners that used bags, airflow decreased from 2.3 m(3)/min (80 cfm) to as little as 0.85 m(3)/min (30 cfm). This airflow loss is caused by the increased airflow resistance of the bags that increased from less 0.03 kPa/m(3)/min (0.1 inches of water per cfm) to 16.7 kPa/m(3)/min (1.9 inches of water/cfm). Apparently, vacuum cleaners using bags should be used in

  16. Self-Compensation of Astigmatism in Mode-Cleaners for Advanced Interferometers

    NASA Astrophysics Data System (ADS)

    Barriga, P.; Zhao, Chunnong; Ju, Li; Blair, David G.

    2006-03-01

    Using a conventional mode-cleaner with the output beam taken through a diagonal mirror it is impossible to achieve a non-astigmatic output. The geometrical astigmatism of triangular mode-cleaners for gravitational wave detectors can be self-compensated by thermally induced astigmatism in the mirrors substrates. We present results from finite element modelling of the temperature distribution of the suspended mode-cleaner mirrors and the associated beam profiles. We use these results to demonstrate and present a self-compensated mode-cleaner design. We show that the total astigmatism of the output beam can be reduced to 5×10-3 for ±10% variation of input power about a nominal value when using the end mirror of the cavity as output coupler.

  17. EVALUATION OF USFILTER MEMBRALOX SILVERBACK MODEL 900 AKALINE CLEANER RECYCLING SYSTEM

    EPA Science Inventory

    The Membralox Silverback Model 900 (Silverback Unit) is a microfiltration system for recycling used alkaline cleaning solutions (cleaners). Alkaline cleaning is performed on metal parts at different times during the manufacturing process to remove oils, coolants and other metalwo...

  18. Adhesion Performance of Solid Film Lubricants on Substrates Cleaned With Environmentally Compliant Cleaners

    NASA Technical Reports Server (NTRS)

    Hall, P. B.; Thom, R. L.

    1997-01-01

    Solid film adhesion testing was used to determine the effect different environmentally compliant cleaners have on the adhesion properties of solid film lubricants used for several NASA programs. In an action to remove ozone depleting chemicals from aerospace processes, a replacement cleaner must be identified that does not affect the adhesion of solid film lubricants used on flight critical NASA hardware. ASTM D251083 Standard Test Method for Adhesion of Solid Film Lubricants was used to evaluate the cleaners. Two different lubricants - Inlox 88 and Boosterlube - were tested using various commercially available cleaners. Inlox 88 is produced by E/M Corporation and is a liquid oxygen compatible lubricant used in the Space Shuttle Main Engine, and Boosterlube is a new lubricant being implemented for use on the Space Shuttle Solid Rocket Booster. These lubricants were selected because of their specific use on flight critical NASA components. Results of this testing are presented in the paper.

  19. ASSESSMENT OF STACHYBOTRYS REGROWTH ON CONTAMINATED WALLBOARD AFTER TREATMENT WITH COMMON SURFACE CLEANERS/DISINFECTANTS

    EPA Science Inventory

    The paper describes results of experiments assessing the efficacy of treating mold-contaminated gypsum wallboard with cleaners and/or disinfectants. Although the accepted recommendations for handling Stachybotrys chartarum contaminated gypsum wallboard are removal and replacement...

  20. IMPACT OF COSOLVENT FLUSHING ON SUBSURFACE MICROBIAL ECOLOGY AT THE FORMER SAGE'S DRY CLEANER SITE

    EPA Science Inventory

    The Solvent Extraction Residual Biotreatment (SERB) technology was evaluated at the former Sage's Dry Cleaner site in Jacksonville, FL where an area of tetrachloroethylene (PCE) contamination was identified. The SERB technology is a treatment train approach to complete site rest...

  1. IMPACT OF COSOLVENT FLUSHING ON SUBSURFACE MICROBIAL ECOLOGY AT A FORMER DRY CLEANER SITE

    EPA Science Inventory

    The Solvent Extraction Residual Biotreatment (SERB) technology was evaluated at a former dry cleaner site in Jacksonville, FL where an area of tetrachloroethene (PCE) contamination was identified. The SERB technology is a treatment train approach to complete site restoration, wh...

  2. 76 FR 71342 - Proposed CERCLA Administrative Cost Recovery Settlement; River Forest Dry Cleaners Site, River...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-17

    ... AGENCY Proposed CERCLA Administrative Cost Recovery Settlement; River Forest Dry Cleaners Site, River Forest, Cook County, IL AGENCY: Environmental Protection Agency (EPA). ACTION: Notice; request for public... proposed administrative settlement for recovery of past response costs concerning the River Forest...

  3. Hemispheric asymmetries and seasonality of mean age of air in the lower stratosphere: Deep versus shallow branch of the Brewer-Dobson circulation

    NASA Astrophysics Data System (ADS)

    Konopka, Paul; Ploeger, Felix; Tao, Mengchu; Birner, Thomas; Riese, Martin

    2015-03-01

    Based on multiannual simulations with the Chemical Lagrangian Model of the Stratosphere, (CLaMS) driven by ECMWF ERA-Interim reanalysis, we discuss hemispheric asymmetries and the seasonality of the mean age of air (AoA) in the lower stratosphere. First, the planetary wave forcing of the Brewer-Dobson circulation is quantified in terms of Eliassen Palm flux divergence calculated by using the isentropic coordinate θ. While the forcing of the deep branch at θ = 1000 K (around 10 hPa) has a clear maximum in each hemisphere during the respective winter, the shallow branch of the Brewer-Dobson circulation, i.e., between 100 and 70 hPa (380 < θ < 420 K), shows almost opposite seasonality in both hemispheres with a pronounced minimum between June and September in the Southern Hemisphere. Second, we decompose the time-tendency of AoA into the contributions of the residual circulation and of eddy mixing by analyzing the zonally averaged tracer continuity equation. In the tropical lower stratosphere between ±30°, the air becomes younger during boreal winter and older during boreal summer. During boreal winter, the decrease of AoA due to tropical upwelling outweighs aging by isentropic mixing. In contrast, weaker isentropic mixing outweighs an even weaker upwelling in boreal summer and fall making the air older during these seasons. Poleward of 60°, the deep branch locally increases AoA and eddy mixing locally decreases AoA with the strongest net decrease during spring. Eddy mixing in the Northern Hemisphere outweighs that in the Southern Hemisphere throughout the year.

  4. Autocorrelation standard deviation and root mean square frequency analysis of polymer electrolyte membrane fuel cell to monitor for hydrogen and air undersupply

    NASA Astrophysics Data System (ADS)

    Kim, Joo Gon; Mukherjee, Santanu; Bates, Alex; Zickel, Benjamin; Park, Sam; Son, Byung Rak; Choi, Jae Sung; Kwon, Osung; Lee, Dong Ha; Chung, Hyun-Youl

    2015-12-01

    Proton exchange membrane fuel cells are a promising energy conversion device which can help to solve urgent environmental and economic problems. Among the various types of fuel cells, the air breathing proton exchange membrane fuel cell, which minimizes the balance of plant, has drawn a lot of attention due to its superior energy density. In this study a compact, air breathing, proton exchange membrane fuel cell based on Nafion and a Pt/C membrane electrode assembly was designed. The fuel cell was tested using a Scribner Associates 850e fuel cell test station. Specifically, the hydrogen fuel and oxygen starvation of the fuel cell were accurately and systematically tested and analyzed using a frequency analysis method which can analyze the input and output frequency. The analysis of the frequency variation under a fuel starvation condition was done using RMSF (root mean square frequency) and ACSD (autocorrelation standard deviation). The study reveals two significant results: first, the fuel starvations show entirely different phenomenon in both RMSF and ACSD and second, the results of the Autocorrelation show clearer results for fuel starvation detection than the results with RMSF.

  5. Ammonium Laurate Surfactant for Cleaner Deposition of Carbon Nanotubes.

    PubMed

    Nilsson, Hanna M; Meany, Brendan; Ticey, Jeremy; Sun, Chuan-Fu; Wang, YuHuang; Cumings, John

    2015-06-30

    Experiments probing the properties of individual carbon nanotubes (CNTs) and those measuring bulk composites show vastly different results. One major issue limiting the results is that the procedures required to separate and test CNTs introduce contamination that changes the properties of the CNT. These contamination residues often come from the resist used in lithographic processing and the surfactant used to suspend and deposit the CNTs, commonly sodium dodecyl sulfate (SDS). Here we present ammonium laurate (AL), a surfactant that has previously not been used for this application, which differs from SDS only by substitution of ionic constituents but shows vastly cleaner depositions. In addition, we show that compared to SDS, AL-suspended CNTs have greater shelf stability and more selective dispersion. These results are verified using transmission electron microscopy, atomic force microscopy, ζ-potential measurements, and Raman and absorption optical spectroscopy. This surfactant is simple to prepare, and the nanotube solutions require minimal sonication and centrifugation in order to outperform SDS. PMID:26020583

  6. Catalysts for cleaner combustion of coal, wood and briquettes sulfur dioxide reduction options for low emission sources

    SciTech Connect

    Smith, P.V.

    1995-12-31

    Coal fired, low emission sources are a major factor in the air quality problems facing eastern European cities. These sources include: stoker-fired boilers which feed district heating systems and also meet local industrial steam demand, hand-fired boilers which provide heat for one building or a small group of buildings, and masonary tile stoves which heat individual rooms. Global Environmental Systems is marketing through Global Environmental Systems of Polane, Inc. catalysts to improve the combustion of coal, wood or fuel oils in these combustion systems. PCCL-II Combustion Catalysts promotes more complete combustion, reduces or eliminates slag formations, soot, corrosion and some air pollution emissions and is especially effective on high sulfur-high vanadium residual oils. Glo-Klen is a semi-dry powder continuous acting catalyst that is injected directly into the furnace of boilers by operating personnel. It is a multi-purpose catalyst that is a furnace combustion catalyst that saves fuel by increasing combustion efficiency, a cleaner of heat transfer surfaces that saves additional fuel by increasing the absorption of heat, a corrosion-inhibiting catalyst that reduces costly corrosion damage and an air pollution reducing catalyst that reduces air pollution type stack emissions. The reduction of sulfur dioxides from coal or oil-fired boilers of the hand fired stoker design and larger, can be controlled by the induction of the Glo-Klen combustion catalyst and either hydrated lime or pulverized limestone.

  7. Impact of a cleaner-burning cookstove intervention on blood pressure in Nicaraguan women

    PubMed Central

    Clark, Maggie L.; Bachand, Annette M.; Heiderscheidt, Judy M.; Yoder, Sarah A.; Luna, Bevin; Volckens, John; Koehler, Kirsten A.; Conway, Stuart; Reynolds, Stephen J.; Peel, Jennifer L.

    2012-01-01

    Few studies have evaluated the cardiovascular-related effects of indoor biomass burning or the role of characteristics such as age and obesity status, in this relationship. We examined the impact of a cleaner-burning cookstove intervention on blood pressure among Nicaraguan women using an open fire at baseline; we also evaluated heterogeneity of the impact by subgroups of the population. We evaluated changes in systolic and diastolic blood pressure from baseline to post-intervention (range: 273–383 days) among 74 female cooks. We measured indoor fine particulate matter (PM2.5; n=25), indoor carbon monoxide (CO; n=32), and personal CO (n=30) concentrations. Large mean reductions in pollutant concentrations were observed for all pollutants; for example, indoor PM2.5 was reduced 77% following the intervention. However, pollution distributions (baseline and post-intervention) were wide and overlapping. Although substantial reductions in blood pressure were not observed among the entire population, a 5.9 mmHg reduction (95% confidence interval [CI]: −11.3, −0.4) in systolic blood pressure was observed among women 40 or more years of age and a 4.6 mmHg reduction (95% CI: −10.0, 0.8) was observed among obese women. Results from this study provide an indication that certain subgroups may be more likely to experience improvements in blood pressure following a cookstove intervention. PMID:22913364

  8. Pipeliners and gas processors target even cleaner operations

    SciTech Connect

    True, R.W.

    1991-12-16

    With the recent passage of amendments to the federal Clean Air Act and the reauthorization next year of the Resource Conservation and Recovery Act, pipelines and gas processors are looking at more ways to tighten operations and avoid polluting surface water or air. This paper reports that some companies are not waiting for the final rules but are taking actions which anticipate tougher standards.

  9. Presence of cleaner wrasse increases the recruitment of damselfishes to coral reefs

    PubMed Central

    Sun, Derek; Cheney, Karen L.; Werminghausen, Johanna; Meekan, Mark G.; McCormick, Mark I.; Cribb, Thomas H.; Grutter, Alexandra S.

    2015-01-01

    Mutualisms affect the biodiversity, distribution and abundance of biological communities. However, ecological processes that drive mutualism-related shifts in population structure are often unclear and must be examined to elucidate how complex, multi-species mutualistic networks are formed and structured. In this study, we investigated how the presence of key marine mutualistic partners can drive the organisation of local communities on coral reefs. The cleaner wrasse, Labroides dimidiatus, removes ectoparasites and reduces stress hormones for multiple reef fish species, and their presence on coral reefs increases fish abundance and diversity. Such changes in population structure could be driven by increased recruitment of larval fish at settlement, or by post-settlement processes such as modified levels of migration or predation. We conducted a controlled field experiment to examine the effect of cleaners on recruitment processes of a common group of reef fishes, and showed that small patch reefs (61–285 m2) with cleaner wrasse had higher abundances of damselfish recruits than reefs from which cleaner wrasse had been removed over a 12-year period. However, the presence of cleaner wrasse did not affect species diversity of damselfish recruits. Our study provides evidence of the ecological processes that underpin changes in local population structure in the presence of a key mutualistic partner. PMID:26289440

  10. Presence of cleaner wrasse increases the recruitment of damselfishes to coral reefs.

    PubMed

    Sun, Derek; Cheney, Karen L; Werminghausen, Johanna; Meekan, Mark G; McCormick, Mark I; Cribb, Thomas H; Grutter, Alexandra S

    2015-08-01

    Mutualisms affect the biodiversity, distribution and abundance of biological communities. However, ecological processes that drive mutualism-related shifts in population structure are often unclear and must be examined to elucidate how complex, multi-species mutualistic networks are formed and structured. In this study, we investigated how the presence of key marine mutualistic partners can drive the organisation of local communities on coral reefs. The cleaner wrasse, Labroides dimidiatus, removes ectoparasites and reduces stress hormones for multiple reef fish species, and their presence on coral reefs increases fish abundance and diversity. Such changes in population structure could be driven by increased recruitment of larval fish at settlement, or by post-settlement processes such as modified levels of migration or predation. We conducted a controlled field experiment to examine the effect of cleaners on recruitment processes of a common group of reef fishes, and showed that small patch reefs (61-285 m(2)) with cleaner wrasse had higher abundances of damselfish recruits than reefs from which cleaner wrasse had been removed over a 12-year period. However, the presence of cleaner wrasse did not affect species diversity of damselfish recruits. Our study provides evidence of the ecological processes that underpin changes in local population structure in the presence of a key mutualistic partner. PMID:26289440

  11. Mean absorption coefficient of H2O-air-MgCl2/CaCl2/NaCl thermal plasmas

    NASA Astrophysics Data System (ADS)

    Hannachi, R.; Cressault, Y.; Salem, D.; Teulet, Ph; Béji, L.; Ben Lakhdar, Z.

    2012-12-01

    Under the local thermodynamic equilibrium hypothesis, the mean absorption coefficients (MACs) were calculated for H2O-air-MgCl2/CaCl2/NaCl thermal plasmas in a temperature range from 300 to 30 000 K and at atmospheric pressure. The MACs were computed under the hypothesis of isothermal plasmas which allows a good description of the radiation absorbed in cold regions. In this study, we took into account the absorption radiation resulting from the atomic continuum, molecular continuum, atomic lines and some molecular bands. Free-free transitions (bremsstrahlung) and free-bound (electron-ion recombination and electron attachment) or bound-free transitions in terms of absorption were considered for the calculation of atomic continuum. For bound-bound transitions, natural, resonance, van der Waals, Stark and Doppler effects were taken into account for the line broadenings while the escape factors were used to treat the self-absorption of the resonance lines. Molecular continuum was considered for the main molecules (H2, O2, N2, OH, NO, H2O, N2O, NO2, O3, NO3 and N2O5) whereas we studied only diatomic systems O2, N2, NO and N_2^+ for the absorption of molecular bands. The influence of the proportion of MgCl2, CaCl2 or NaCl in a water-air mixture was analysed as the effect of the strong self-absorbed resonance lines of the alkaline salts (Ca, Ca+, Na, Na+, Mg, Mg+, Cl and Cl+). Our results show that a low concentration of alkaline salts (less than 1% in molar proportions) in the plasma increased the MACs at low temperatures (T < 10 000 K) due to the resonance lines mainly localized in the near-UV and visible spectral regions in opposition to hydrogen, oxygen or nitrogen species for which 90% of them exist in ultraviolet. In addition to the atomic and molecular continuum, the absorption radiation of molecular bands is important at low temperatures.

  12. Power and temptation cause shifts between exploitation and cooperation in a cleaner wrasse mutualism

    PubMed Central

    Gingins, Simon; Werminghausen, Johanna; Johnstone, Rufus A.; Grutter, Alexandra S.; Bshary, Redouan

    2013-01-01

    In many instances of cooperation, only one individual has both the potential and the incentive to ‘cheat’ and exploit its partner. Under these asymmetric conditions, a simple model predicts that variation in the temptation to cheat and in the potential victim's capacity for partner control leads to shifts between exploitation and cooperation. Here, we show that the threat of early termination of an interaction was sufficient to induce cleaner wrasse Labroides dimidiatus to feed selectively against their preference (which corresponds to cooperatively eating client fish ectoparasites), provided that their preference for alternative food was weak. Under opposite conditions, cleaners fed selectively according to their own preference (which corresponds to cheating by eating client mucus). By contrast, a non-cleaning fish species, Halichoeres melanurus, failed to adjust its foraging behaviour under these same conditions. Thus, cleaners appear to have evolved the power to strategically adjust their levels of cooperation according to the circumstances. PMID:23615288

  13. Determining the EDTA Content in a Consumer Shower Cleaner. An Introductory Chemistry Laboratory Experiment

    NASA Astrophysics Data System (ADS)

    Weigand, Willis A.

    2000-10-01

    At Altoona College, Chemistry 11 is offered to students as a preparatory course for the University's Chemical Principles course, Chem 12. A relevant laboratory is a source of motivation for the students to learn the chemistry. One way of making the laboratory relevant is to analyze the chemical components of consumer products. Several new shower-cleaning products have been introduced, which advertise that cleaning the shower is no longer necessary. The cleaners work using a combination of surfactants, alcohols, and a chelating agent. The Web site of a popular shower cleaner lists EDTA (ethylenediamine tetraacetate ion) as the chelating agent. The classic EDTA/calcium complexometric titration can be used to determine the EDTA content of the cleaner. This article describes the experiment to determine the EDTA content in a shower-cleaning product.

  14. Collaborative Large-scale Engineering Analysis Network for Environmental Research (CLEANER)Science Planning

    NASA Astrophysics Data System (ADS)

    Schnoor, J. L.; Minsker, B. S.; Haas, C. N.

    2005-12-01

    The Project Office of the Collaborative Large-scale Engineering Analysis Network for Environmental Research (CLEANER) was awarded a cooperative agreement from the National Science Foundation (NSF)and began operations on August 1, 2005. Since that time we have organized six standing committees and an executive committee with an advisory board. The first all-hands meeting of CLEANER took place at NSF and the National Center for Supercomputing Applications (NCSA) Access facility in Arlington, Virginia, in September. Among the initial tasks of CLEANER is to join with the Consortium of Universities for the Advancement of Hydrological Sciences Incorporated (CUAHSI) in developing a joint science plan for a national observatory for environmental research utilizing NSF Major Research Equipment and Facilities Construction (MREFC) funds slated for 2011. This presentation describes our initial thinking on the science plan and our vision for the national environmental observatory and cyberinfrastructure.

  15. Life cycle environmental impacts of vacuum cleaners and the effects of European regulation.

    PubMed

    Gallego-Schmid, Alejandro; Mendoza, Joan Manuel F; Jeswani, Harish Kumar; Azapagic, Adisa

    2016-07-15

    Energy efficiency of vacuum cleaners has been declining over the past decades while at the same time their number in Europe has been increasing. The European Commission has recently adopted an eco-design regulation to improve the environmental performance of vacuum cleaners. In addition to the existing directive on waste electrical and electronic equipment (WEEE), the regulation could potentially have significant effects on the environmental performance of vacuum cleaners. However, the scale of the effects is currently unknown, beyond scant information on greenhouse gas emissions. Thus, this paper considers for the first time life cycle environmental impacts of vacuum cleaners and the effects of the implementation of these regulations at the European level. The effects of electricity decarbonisation, product lifetime and end-of-life disposal options are also considered. The results suggest that the implementation of the eco-design regulation alone will reduce significantly the impacts from vacuum cleaners (37%-44%) by 2020 compared with current situation. If business as usual continued and the regulation was not implemented, the impacts would be 82%-109% higher by 2020 compared to the impacts with the implementation of the regulation. Improvements associated with the implementation of the WEEE directive will be much smaller (<1% in 2020). However, if the WEEE directive did not exist, then the impacts would be 2%-21% higher by 2020 relative to the impacts with the implementation of the directive. Further improvements in most impacts (6%-20%) could be achieved by decarbonising the electricity mix. Therefore, energy efficiency measures must be accompanied by appropriate actions to reduce the environmental impacts of electricity generation; otherwise, the benefits of improved energy efficiency could be limited. Moreover, because of expected lower life expectancy of vacuum cleaners and limited availability of some raw materials, the eco-design regulation should be

  16. GAS-PHASE AND PARTICULATE EMISSIONS DURING APPLICATION OF A WATER-BASED CLEANER WITH A HAND-PUMP SPRAYER

    EPA Science Inventory

    The paper gives results of tests in a controlled environment test room to measure concentrations of 2-butoxyethanol and particles during application of a cleaner to realistic surfaces (counter tops, glass, walls). (NOTE: Users of water-based cleaners applied with hand-pump spray...

  17. Hepa room air purifier

    SciTech Connect

    Davis, G.B.

    1986-12-16

    This patent describes a portable air purification apparatus comprising a housing including a base portion and cover means, the base portion including an air deflection means and a plate means mounted in spaced relationship to the air deflection means so as to create a substantially continuous air exhaust opening therebetween. A centrifugal fan means is disposed between the plate means and the air deflection means and is mounted so as to direct air radially outwardly therefrom through the air exhaust opening, at least one opening through the plate means to permit air flow therethrough to the centrifugal fan means. The motor means carried by the base portion and extends upwardly with respect to the opening in the plate means, the motor means having drive shaft means for driving the centrifugal fan means. An air filter means is mounted between the base portion and the cover means so that air is drawn therethrough toward the centrifugal fan means, and a means for secures the cover means relative to the base means to thereby retain the air filter means therebetween.

  18. ENVIRONMENTAL TECHNOLOGY VERIFICATION: GENERIC VERIFICATION PROTOCOL FOR BIOLOGICAL AND AEROSOL TESTING OF GENERAL VENTILATION AIR CLEANERS

    EPA Science Inventory

    The U.S. Environmental Protection Agency established the Environmental Technology Verification Program to accelerate the development and commercialization of improved environmental technology through third party verification and reporting of product performance. Research Triangl...

  19. The road to Clean Cities: Promoting energy security and cleaner air through alternative fuels

    SciTech Connect

    Chun, C.A.

    1997-12-31

    The United States Department of Energy (DOE) Clean Cities Program is a locally-based government/industry partnership program coordinated by DOE to expand the use of alternatives to gasoline and diesel fuel. By combining local decision-making with the voluntary action of partners, the Clean Cities grass roots approach departs from traditional government programs. It creates an effective plan, carried out at the local level, to establish a sustainable alternative fuels market. The broad goals of the Clean Cities Program are to: reduce dependence on foreign oil, improve the environment, and increase economic growth and competitiveness. The key element of success for this program is partnerships -- public/private partnerships that engage the necessary market forces to accomplish the infusion of new alternative fuels and alternative fuel vehicle (AFV) technologies. DOE does not provide direct funding for acquisition of AFVs and products, but rather, provides market development assistance. DOE technical and management resources are targeted at building local coalitions, coordinating technology product suppliers, and improving market and customer information. Clean Cities works directly with local governments and local businesses and shares innovations along the network of Clean Cities coalitions. Since 1993, Clean Cities has made great strides in diversifying transportation fuel consumption. Voluntary Clean Cities partnerships around the United States have heightened public awareness of alternative fuel usage, increased the number of AFVs on the road, and developed alternative fuels infrastructure throughout North America. The Clean Cities Program encourages sustainable development by reducing a community`s dependence on nonrenewable fossil fuels (both domestic and imported), cleaning up the local and global environment, and boosting local economies through the development of alternative fuels industries.

  20. The catalogCleaner: Separating the Sheep from the Goats

    NASA Astrophysics Data System (ADS)

    O'Brien, K.; Hankin, S. C.; Schweitzer, R.; Koyuk, H.

    2012-12-01

    possible. However, it quickly became obvious, through the sheer volume of data servers available, that the manual process of building a master catalog was not scalable. Thus, the idea for the catalogCleaner tool was born. The goal of this tool is to automatically crawl a remote OPeNDAP or THREDDS server, and from the information in the server build a "clean" catalog of data that will be: a) served through uniform access services; b) have CF compliant metadata; c) directly link the data to common visualization tools thereby allowing users to immediately begin exploring actual data. In addition, the UAF-generated clean catalog can then be used to drive data discovery tools such as Geoportal, GI-CAT, etc. This presentation will further explore the motivation of creating this tool, the implementation of this tool, as well as the myriad of challenges and difficulties there were encountered along the way.

  1. Visibility and social recognition as psychosocial work environment factors among cleaners in a multi-ethnic workplace intervention.

    PubMed

    Hviid, Kirsten; Smith, Louise Hardman; Frydendall, Karen Bo; Flyvholm, Mari-Ann

    2013-01-01

    This article focuses on the psychosocial work environment of immigrant cleaners at a Danish workplace. Today, many cleaners working in Danish cleaning jobs are women from the established immigrant communities, but also labour migrants from the newer EU member states have found their way to the cleaning industry. Studies have drawn attention to immigrants' low position in the cleaning industry and their increased risk of work injuries. This article is based on a case study of an intervention called "Make a Difference" designed to improve the work environment among cleaners at a multi-ethnic workplace. We used semi-structured interviews, photo logs, observation and participation to investigate how the cleaners experienced their work environment. The cleaners reported an overload of heavy work, related to the concept of a classroom's "readiness for cleaning", and they expressed strained social relations and communication in addition to a lack of social recognition and invisibility at the workplace, a school. We analysed these psychosocial work environmental problems by investigating the different forms of social relationships and communication within the group of cleaners, and between the cleaners and the teachers and pupils at the school. Moreover, we discussed why the intervention, based on training of language and cleaning skills and social interaction, only partially improved the cleaners' psychosocial work environment problems. In this article, we argue that social divisions based on ethnicity between the new and the established group of cleaners, combined with their marginal position and poor work organisation at the school, reinforced the cleaners' experiences of psychosocial work environment problems. This article suggests that increased effort towards social inclusion at work and improved work organisation, especially for the new labour migrants from newer EU-countries, should be considered. PMID:23263660

  2. A cleaner production approach to urban water management: potential for application in Harare, Zimbabwe

    NASA Astrophysics Data System (ADS)

    Nhapi, Innocent; Hoko, Zvikomborero

    Water quality is an urgent problem in the Lake Chivero catchment, Zimbabwe, whilst water scarcity will be a problem soon. This study focused on assessing the potential impacts of the application of cleaner production principles in urban water supply and sanitation in the context of sustainable management of water resources. The cleaner production principles are explained together with how they can be applied to urban water management. Data from City of Harare and previous studies were collected and analysed. The study focused mainly on water, nitrogen and phosphorus. About 304,000 m 3/d of wastewater, containing 30,000 kg/d TN and 3600 kg/d TP are currently produced and treated at five sewage treatment works in Harare. Water conservation, treatment and reuse strategies were developed for different land uses starting from water-saving devices, regulation, leak detection and repair, to wastewater treatment and reuse. This study showed that the application of the cleaner production principles would reduce total wastewater production from 487,000 m 3/d to 379,000 m 3/d (a 27% reduction) based on year 2015 projections. A very large investment in treatment infrastructure can be postponed for about 10 years. In terms of amounts treated and discharged at central level this translates to reductions of 47% on flows, 34% on TN, and 44% on TP. River discharges can be eliminated. It was concluded that a cleaner production approach could substantially reduce current water pollution and long-term scarcity problems in Harare.

  3. 40 CFR 761.378 - Decontamination, reuse, and disposal of solvents, cleaners, and equipment.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Decontamination, reuse, and disposal...-Porous Surfaces § 761.378 Decontamination, reuse, and disposal of solvents, cleaners, and equipment. (a) Decontamination. Decontaminate solvents and non-porous surfaces on equipment in accordance with the standards...

  4. 40 CFR 761.378 - Decontamination, reuse, and disposal of solvents, cleaners, and equipment.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 31 2011-07-01 2011-07-01 false Decontamination, reuse, and disposal...-Porous Surfaces § 761.378 Decontamination, reuse, and disposal of solvents, cleaners, and equipment. (a) Decontamination. Decontaminate solvents and non-porous surfaces on equipment in accordance with the standards...

  5. 40 CFR 761.378 - Decontamination, reuse, and disposal of solvents, cleaners, and equipment.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Decontamination, reuse, and disposal...-Porous Surfaces § 761.378 Decontamination, reuse, and disposal of solvents, cleaners, and equipment. (a) Decontamination. Decontaminate solvents and non-porous surfaces on equipment in accordance with the standards...

  6. 40 CFR 761.378 - Decontamination, reuse, and disposal of solvents, cleaners, and equipment.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Decontamination, reuse, and disposal...-Porous Surfaces § 761.378 Decontamination, reuse, and disposal of solvents, cleaners, and equipment. (a) Decontamination. Decontaminate solvents and non-porous surfaces on equipment in accordance with the standards...

  7. 40 CFR 761.378 - Decontamination, reuse, and disposal of solvents, cleaners, and equipment.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Decontamination, reuse, and disposal...-Porous Surfaces § 761.378 Decontamination, reuse, and disposal of solvents, cleaners, and equipment. (a) Decontamination. Decontaminate solvents and non-porous surfaces on equipment in accordance with the standards...

  8. Evaluation of a sporicidal peracetic acid/hydrogen peroxide-based daily disinfectant cleaner.

    PubMed

    Deshpande, Abhishek; Mana, Thriveen S C; Cadnum, Jennifer L; Jencson, Annette C; Sitzlar, Brett; Fertelli, Dennis; Hurless, Kelly; Kundrapu, Sirisha; Sunkesula, Venkata C K; Donskey, Curtis J

    2014-11-01

    OxyCide Daily Disinfectant Cleaner, a novel peracetic acid/hydrogen peroxide-based sporicidal disinfectant, was as effective as sodium hypochlorite for in vitro killing of Clostridium difficile spores, methicillin-resistant Staphylococcus aureus, and vancomcyin-resistant enterococci. OxyCide was minimally affected by organic load and was effective in reducing pathogen contamination in isolation rooms. PMID:25333438

  9. Investigation of fiber maturity effect on saw-type lint cleaner fiber damage and yarn properties

    Technology Transfer Automated Retrieval System (TEKTRAN)

    One-half of plots of two cotton cultivars with similar mature fiber length were harvested after two defoliation treatments (early/late) to get less and more mature cottons. These seed cotton lots were ginned with the same seed cotton cleaning but with 0, 1, or 3 saw-type lint cleaners with low dryi...

  10. Effects of Friction Reduction on Fiber Damage in a Saw-Type Lint Cleaner

    Technology Transfer Automated Retrieval System (TEKTRAN)

    U.S. cotton is at a competitive disadvantage from a fiber-quality standpoint, because lint cleaning is required for mechanically harvested cotton, and lint cleaning causes fiber damage. Lint-cleaning research has focused mainly on modifying saw-type lint cleaners, but the work reported here focuses...

  11. Observing the motion of seed coat fragments on a saw-type lint cleaner

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A study was conducted to observe how seed coat fragments (in ginned lint) reacted after colliding with grid bars mounted on a full-size saw-type lint cleaner. A high-speed video camera recorded the collision. A 45° and 105° grid bar were used in the study. The grid bars were labeled to describe t...

  12. CHARACTERIZATION OF AEROSOLS FROM A WATER-BASED CLEANER APPLIED WITH A HAND-PUMP SPRAYER

    EPA Science Inventory

    The paper gives results of tests that were performed in a controlled-environment test room to measure particle concentrations and size distributions and concentrations of selected volatily organic compounds during, and following, application of water-based cleaners to realistic s...

  13. Diagramming the path of a seed coat fragment on experimental lint cleaner grid bars

    Technology Transfer Automated Retrieval System (TEKTRAN)

    An experiment was run to determine how a seed coat fragment reacts after colliding with newly-designed grid bars mounted on a lint cleaner simulator. A high-speed video camera recorded the action that took place. Ten experimental grid bars were used in the test. The included angle of the sharp to...

  14. Charting the collision between a seed coat fragment and newly-designed lint cleaner grid bars

    Technology Transfer Automated Retrieval System (TEKTRAN)

    An experiment was run to determine how a seed coat fragment (SCF) reacts after colliding with newly-designed grid bars mounted on a saw-type lint cleaner simulator. A high-speed video camera recorded the action that took place. Ten experimental grid bars were tested. The included angle of the sha...

  15. [Case of dyspnea due to toilet cleaner containing nitric acid for household use].

    PubMed

    Yanagawa, Youichi; Matsukawa, Takehisa; Yokoyama, Kazuhito; Hirano, Yohei; Ri, Tetsunari; Aihara, Koichiro; Iba, Toshiaki; Tanaka, Hiroshi

    2013-09-01

    A 40-year-old male tried to clean a urinal at his home storing 900 mL of a toilet cleaner containing 9.8% nitric acid to remove calcium deposit, and clean the toilet floor for twenty minutes. Immediately after using the cleaner, he experienced eye irritation. He washed out the toilet cleaner. However, he thereafter experienced dyspnea, a compressive sensation in his chest, and chest and back pain about 40 minutes after the cleaning the toilet. He monitored his symptoms overnight and found them to gradually improve. However, the symptoms still remained the next morning and therefore he came to our department on foot. He had no particular past or family history. On arrival, his physiological findings and chest computed tomography scan were negative for any abnormalities. His arterial blood gas analysis revealed a mild abnormality of oxygenation. Observation without any drugs revealed that a complete remission of his symptoms occurred after approximately 4 weeks. Based on the results of the experiments, contact with the mucosal membrane and nitric acid gas produced by any accidentally coexisting metals or contact with moisture, including nitric acid produced by a reaction between CaCO3 and cleaner, may have been the mechanism of occurrence for the symptoms observed in this case. This is the first reported case of nitric acid poisoning due to the use of a toilet cleanser intended for household use. PMID:24224389

  16. Using Pipe Cleaners to Bring the Tree of Life to Life

    ERIC Educational Resources Information Center

    Halverson, Kristy L.

    2010-01-01

    Phylogenetic trees, such as the "Tree of Life," are commonly found in biology textbooks and are often used in teaching. Because students often struggle to understand these diagrams, I developed a simple, inexpensive classroom model. Made of pipe cleaners, it is easily manipulated to rotate branches, compare topologies, map complete lineages,…

  17. DETAIL OF ZINC CLEANER CELL INTERIOR (EXPOSED AT F/45 FOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL OF ZINC CLEANER CELL INTERIOR (EXPOSED AT F/45 FOR DEPTH OF FIELD PURPOSES). NOTE GALIGHER STYLE BAFFLES AND TENDENCY OF ZINC TO BUILD UP ON CELL COMPONENTS. - Shenandoah-Dives Mill, 135 County Road 2, Silverton, San Juan County, CO

  18. Use of a foaming disinfectant and cleaner to reduce aerobic bacteria on poultry transport coops

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Poultry transportation coops are rarely washed and have been demonstrated to be a point of cross-contamination of broiler carcasses. Foaming disinfectants and cleaners, commonly used within processing plants, may be used to clean and disinfect poultry transportation coops. In this study, homogeniz...

  19. Technical, occupational health and environmental aspects of metal degreasing with aqueous cleaners.

    PubMed

    Lavoué, Jérôme; Bégin, Denis; Géerin, Michel

    2003-08-01

    Aqueous cleaners used for metal degreasing are detergent formulations containing surfactants (such as linear alkylbenzene sulphonates, alkylphenol ethoxylates or alcohol ethoxylates), builders (such as hydroxides, phosphates or silicates), sequestrants (such as EDTA or NTA), anti-corrosive agents (such as ethanolamines), solvents (such as glycol ethers or d-limonene) and other specialty additives. Generally sold as concentrates, they are typically diluted between 3 and 20 times in water, leading to solutions containing only a few per cent active products. The cleaning efficiency depends on physicochemical phenomena such as wetting, solubilization, emulsification, dispersion, sequestration and saponification, and is enhanced by thermal and mechanical energy. Cleaning equipment is based on spraying or immersion of the parts and may include drying and rinsing steps. Because of the complexity and variability of the mixtures, the occupational health and environmental evaluation of aqueous cleaners is based on the study of their components. Aqueous cleaners are generally believed to present a low risk to workers' health and to the environment. However, some anionic surfactants and strong alkalis are skin and eye irritants, ethanolamines are allergenic and several glycol ethers of the ethylene glycol family are proven systemic toxicants that are easily absorbed through the skin. Although most components of aqueous cleaners are biodegradable and of low ecotoxicity, alkylphenol ethoxylates degrade into persistent and toxic compounds. Phosphates, if released directly into the environment, may cause eutrophication of rivers and lakes. Waste recycling or treatment by specialized facilities is usually required for spent solutions containing contaminants such as oils and heavy metals. From a technical, toxicological and environmental standpoint, aqueous cleaners can be used successfully to replace traditional organic solvents used in metal degreasing. PMID:12890654

  20. Development of an air knife to remove seed coat fragments during lint cleaning

    Technology Transfer Automated Retrieval System (TEKTRAN)

    An air knife is a tool commonly used to blow off debris in a manufacturing line. The knife may also be used to break the attachment force between a lint cleaner saw and a seed coat fragment (SCF) with attached fiber, and remove them. Work continued on evaluating an auxiliary air knife mounted on t...

  1. Sampling and Analyzing Air Pollution: An Apparatus Suitable for Use in Schools.

    ERIC Educational Resources Information Center

    Rockwell, Dean M.; Hansen, Tony

    1994-01-01

    Describes two variations of an air sampler and analyzer that are inexpensive to construct, easy to operate, and designed to be used in an educational program. Variations use vacuum cleaners and aquarium pumps, and white facial tissues serve as filters. Samples of air pollution obtained by this method may be used from early grade school to advanced…

  2. Air filtering device

    SciTech Connect

    Backus, A.L.

    1992-07-28

    This patent describes a room air cleaning device. It comprises: a box housing having an air inlet and an air outlet provided therein; a vertical baffle coupled to the box housing opposite the air outlet and spaced form the box housing such that an air egress outlet is formed between the vertical baffle and the box housing; air cleansing means substantially disposed within the box housing and cleansing air passing into the inlet and out of the air egress outlet; a fan disposed within the box housing, the fan providing air movement through the air inlet and the air egress outlet; wherein air exits the room air cleaning device through the air egress outlet as a vertical plane of moving air; and wherein formation of the vertical plane of moving air contributes to the formation of a low pressure area drawing impure air toward the air inlet.

  3. The Asian Development Bank`s role in promoting cleaner production in the People`s Republic of China

    SciTech Connect

    Huq, A.; Lohani, B.N.; Jalal, K.F.; Ouano, E.A.R.

    1999-09-01

    The People`s Republic of China (PRC) has the fastest growing economy in the world and is the third largest producer and consumer of energy. At the same time, the PRC`s industrial sector contributes heavily to air and water pollution. Because of the linkages between the production and use of energy and environmental degradation, the PRC, with the active support of bilateral and multilateral aid agencies, including the Asian Development Bank (ADB), is adopting measures that link economic growth to improvements in the environment. The PRC is pursuing a two-pronged strategy that involves implementing priority investment programs and promoting economic reforms. The ADB`s experience shows that the concept of cleaner production (CP) has been widely accepted, but the widespread adoption of CP requires a new way of thinking and new management capacities. In this regard, the PRC is at an early stage of promoting CP, and inadequacies in coordination among relevant agencies remain a key obstacle. To support CP activities, the ADB is participating in a cluster of activities within China that include policy development, capacity building, and financing environmental investments. This article describes the ADB`s current efforts to promote CP in PRC and analyzes the effectiveness of those efforts.

  4. Surface chemistry of a pine-oil cleaner and other terpene mixtures with ozone on vinyl flooring tiles.

    PubMed

    Ham, Jason E; Wells, J Raymond

    2011-04-01

    Indoor environments are dynamic reactors where consumer products (such as cleaning agents, deodorants, and air fresheners) emit volatile organic compounds (VOCs) that can subsequently interact with indoor oxidants such as ozone (O(3)), hydroxyl radicals, and nitrate radicals. Typically, consumer products consist of mixtures of VOCs and semi-VOCs which can react in the gas-phase or on surfaces with these oxidants to generate a variety of oxygenated products. In this study, the reaction of a pine-oil cleaner (POC) with O(3) (100ppb) on a urethane-coated vinyl flooring tile was investigated at 5% and 50% relative humidity. These results were compared to previous α-terpineol+O(3) reactions on glass and vinyl surfaces. Additionally, other terpene and terpene alcohol mixtures were formulated to understand the emission profiles as seen in the POC data. Results showed that the α-terpineol+O(3) reaction products were the prominent species that were also observed in the POC/O(3) surface experiments. Furthermore, α-terpineol+O(3) reactions generate the largest fraction of oxygenated products even in equal mixtures of other terpene alcohols. This finding suggests that the judicial choice of terpene alcohols for inclusion in product formulations may be useful in reducing oxidation product emissions. PMID:21237482

  5. A randomised controlled trial among cleaners-Effects on strength, balance and kinesiophobia

    PubMed Central

    2011-01-01

    Background Cleaners constitute a job group with poor health and low socioeconomic resources. Therefore, there is a great need for scientifically documented health promoting initiatives for cleaners. However, both workplace initiatives and high quality intervention studies are lacking. The aim of this study was to evaluate the effects of a 3-month workplace trial with interventions to improve physical or cognitive behavioural resources among cleaners. Methods A cluster randomised controlled trial was conducted among 294 female cleaners from 9 workplaces. The participants were allocated to three groups: Physical coordination training (PCT, n = 95), Cognitive behavioural theory-based training (CBTr, n = 99) and Reference group (REF, n = 100). Interventions were conducted during work hours for an average of 1 hour/week. Muscle strength was measured by maximal voluntary contractions in trunk/extension, and shoulder abduction/elevation. Postural balance was measured on a force platform. Kinesiophobia was measured with Tampa Scale for Kinesiophobia. Test and questionnaires were completed at baseline and at 3-month follow-up and analyses followed the intention-to-treat (ITT) principle with last observation carried forward in case of missing data at follow-up. Reports and analyses are given on true observations as well. Results ITT-analyses revealed that PCT improved strength of the trunk (p < .05) and postural balance (p < .05) compared to CBTr and REF. Based on true observations the strength and balance improvements corresponded to ~20% and ~16%, respectively. ITT-analyses showed that CBTr reduced kinesiophobia compared to PCT and REF (p < .05). Based on true observations, the improvement corresponded to a ~16% improvement. Conclusion This workplace-based intervention study including PCT and CBTr among cleaners improved strength and postural balance from PCT, and kinesiophobia from CBTr. The improved strength, postural balance and kinesiophobia may improve the cleaners

  6. Historical Occupational Trichloroethylene Air Concentrations Based on Inspection Measurements From Shanghai, China

    PubMed Central

    Friesen, Melissa C.; Locke, Sarah J.; Chen, Yu-Cheng; Coble, Joseph B.; Stewart, Patricia A.; Ji, Bu-Tian; Bassig, Bryan; Lu, Wei; Xue, Shouzheng; Chow, Wong-Ho; Lan, Qing; Purdue, Mark P.; Rothman, Nathaniel; Vermeulen, Roel

    2015-01-01

    Purpose: Trichloroethylene (TCE) is a carcinogen that has been linked to kidney cancer and possibly other cancer sites including non-Hodgkin lymphoma. Its use in China has increased since the early 1990s with China’s growing metal, electronic, and telecommunications industries. We examined historical occupational TCE air concentration patterns in a database of TCE inspection measurements collected in Shanghai, China to identify temporal trends and broad contrasts among occupations and industries. Methods: Using a database of 932 short-term, area TCE air inspection measurements collected in Shanghai worksites from 1968 through 2000 (median year 1986), we developed mixed-effects models to evaluate job-, industry-, and time-specific TCE air concentrations. Results: Models of TCE air concentrations from Shanghai work sites predicted that exposures decreased 5–10% per year between 1968 and 2000. Measurements collected near launderers and dry cleaners had the highest predicted geometric means (GM for 1986 = 150–190mg m−3). The majority (53%) of the measurements were collected in metal treatment jobs. In a model restricted to measurements in metal treatment jobs, predicted GMs for 1986 varied 35-fold across industries, from 11mg m−3 in ‘other metal products/repair’ industries to 390mg m–3 in ‘ships/aircrafts’ industries. Conclusions: TCE workplace air concentrations appeared to have dropped over time in Shanghai, China between 1968 and 2000. Understanding differences in TCE concentrations across time, occupations, and industries may assist future epidemiologic studies in China. PMID:25180291

  7. Enhancing indoor air quality -The air filter advantage.

    PubMed

    Vijayan, Vannan Kandi; Paramesh, Haralappa; Salvi, Sundeep Santosh; Dalal, Alpa Anil Kumar

    2015-01-01

    Air pollution has become the world's single biggest environmental health risk, linked to around 7 million deaths in 2012 according to a recent World Health Organisation (WHO) report. The new data further reveals a stronger link between, indoor and outdoor air pollution exposure and cardiovascular diseases, such as strokes and ischemic heart disease, as well as between air pollution and cancer. The role of air pollution in the development of respiratory diseases, including acute respiratory infections and chronic obstructive pulmonary diseases, is well known. While both indoor and outdoor pollution affect health, recent statistics on the impact of household indoor pollutants (HAP) is alarming. The WHO factsheet on HAP and health states that 3.8 million premature deaths annually - including stroke, ischemic heart disease, chronic obstructive pulmonary disease (COPD) and lung cancer are attributed to exposure to household air pollution. Use of air cleaners and filters are one of the suggested strategies to improve indoor air quality. This review discusses the impact of air pollutants with special focus on indoor air pollutants and the benefits of air filters in improving indoor air quality. PMID:26628762

  8. Enhancing indoor air quality –The air filter advantage

    PubMed Central

    Vijayan, Vannan Kandi; Paramesh, Haralappa; Salvi, Sundeep Santosh; Dalal, Alpa Anil Kumar

    2015-01-01

    Air pollution has become the world's single biggest environmental health risk, linked to around 7 million deaths in 2012 according to a recent World Health Organisation (WHO) report. The new data further reveals a stronger link between, indoor and outdoor air pollution exposure and cardiovascular diseases, such as strokes and ischemic heart disease, as well as between air pollution and cancer. The role of air pollution in the development of respiratory diseases, including acute respiratory infections and chronic obstructive pulmonary diseases, is well known. While both indoor and outdoor pollution affect health, recent statistics on the impact of household indoor pollutants (HAP) is alarming. The WHO factsheet on HAP and health states that 3.8 million premature deaths annually - including stroke, ischemic heart disease, chronic obstructive pulmonary disease (COPD) and lung cancer are attributed to exposure to household air pollution. Use of air cleaners and filters are one of the suggested strategies to improve indoor air quality. This review discusses the impact of air pollutants with special focus on indoor air pollutants and the benefits of air filters in improving indoor air quality. PMID:26628762

  9. A pilot study of energy efficient air cleaning for ozone

    SciTech Connect

    Gundel, Lara A.; Sullivan, Douglas P.; Katsapov, Gregory Y.; Fisk, William J.

    2002-11-01

    A laboratory pilot study has been undertaken with the material that showed the most promise (high capacity and low pressure drop) based on the literature review and associated calculations. The best-performing air cleaner was a commercially available pleated filter that contained a thin layer of small activated carbon particles between two sheets of non-woven fibrous webbing. We will refer to this unit as the ''ozone filter'' although it is marketed for removal of volatile organic compounds (VOCs) from automobile passenger compartments. This pilot study strongly suggests that ozone air cleaning can be practical in commercial air handling systems; however, further tests are needed to assess air cleaner performance under a wider range of conditions.

  10. Efficient one-day sampling of mechanical job exposure data--a study based on upper trapezius activity in cleaners and office workers.

    PubMed

    Mathiassen, Svend Erik; Burdorf, Alex; van der Beek, Allard J; Hansson, Gert-Ake

    2003-01-01

    This ergonomics exposure assessment study compared the efficiency of eight 1-day-only strategies, that is, the relationship between the number of data collected per subject and the precision of the resulting mean exposure estimate. Whole-day electromyographic recordings from the right upper trapezius muscle in 24 cleaners and 23 office workers were processed to give minute-by-minute values of gap time and jerk time-parameters representing the level and frequency dimensions of muscle activation, respectively. On-site observations provided data on time spent in each of eight exhaustive task categories in the job, seven of which were associated with activities during work, and the last comprising breaks. On average, sampling at fixed intervals without regard to tasks doubled efficiency as compared with random sampling, which in turn was several times as efficient as consecutive sampling. Stratified sampling according to the two broad categories, work and breaks, increased efficiency for random and fixed-interval sampling, but the gain was distinct only among cleaners (about 20%). The commonly used strategy in ergonomic studies of sampling consecutively for short periods within tasks was highly inefficient. Further classification of work into the seven subcategories resulted in marginal additional increases in efficiency; on average less than 2%. A decision algorithm is given for determining appropriate sampling strategies in different types of jobs. PMID:12688844

  11. What drives successful implementation of pollution prevention and cleaner technology strategy? The role of innovative capability.

    PubMed

    Bhupendra, Kumar Verma; Sangle, Shirish

    2015-05-15

    Firms that are dynamic and prepared to implement environmental strategies have a potential competitive advantage over their industry counterparts. Therefore, it is important to understand, what capabilities are required to implement proactive environmental strategies. The paper discusses the attributes of innovative capability required by firms in order to adopt pollution prevention and cleaner technology strategies. Empirical results show that process and behavioral innovativeness are required by firms to implement a pollution prevention strategy. In addition to process and behavioral innovativeness, firms need a top management with high risk-taking ability as well as market, product, and strategic innovativeness to implement a cleaner technology strategy. The paper proposes some important managerial implications on the basis of the above research findings. PMID:25837297

  12. Partitioning of residual D-limonene cleaner vapor among organic materials in weapons

    SciTech Connect

    LeMay, J.D.

    1993-03-01

    D-limonene is a replacement solvent selected by Sandia and Allied-Signal to clean solder flux from electronics assemblies in firesets and programmers. D-limonene is much slower drying than the solvents it has replaced and this has raised concerns that residual quantities of the cleaner could be trapped in the electronics assemblies and eventually carried into warhead assemblies. This paper describes a study designed to evaluate how vapors from residual d-limonene cleaner would be partitioned among typical organic materials in a Livermore device. The goal was to identify possible compatibility problems arising from the use of d-limonene and, in particular, any interactions it may have with energetic materials. To predict the partitioning behavior of d-limonene, a simple model was developed and its predictions are compared to the experimental findings.

  13. Risk assessment of amorphous silicon dioxide nanoparticles in a glass cleaner formulation

    PubMed Central

    Scheel, Julia; Karsten, Stefan; Stelter, Norbert; Wind, Thorsten

    2013-01-01

    Since nanomaterials are a heterogeneous group of substances used in various applications, risk assessment needs to be done on a case-by-case basis. Here the authors assess the risk (hazard and exposure) of a glass cleaner with synthetic amorphous silicon dioxide (SAS) nanoparticles during production and consumer use (spray application). As the colloidal material used is similar to previously investigated SAS, the hazard profile was considered to be comparable. Overall, SAS has a low toxicity. Worker exposure was analysed to be well controlled. The particle size distribution indicated that the aerosol droplets were in a size range not expected to reach the alveoli. Predictive modelling was used to approximate external exposure concentrations. Consumer and environmental exposure were estimated conservatively and were not of concern. It was concluded based on the available weight-of-evidence that the production and application of the glass cleaner is safe for humans and the environment under intended use conditions. PMID:22548260

  14. Visibility and Social Recognition as Psychosocial Work Environment Factors among Cleaners in A Multi-Ethnic Workplace Intervention

    PubMed Central

    Hviid, Kirsten; Smith, Louise Hardman; Frydendall, Karen Bo; Flyvholm, Mari-Ann

    2012-01-01

    This article focuses on the psychosocial work environment of immigrant cleaners at a Danish workplace. Today, many cleaners working in Danish cleaning jobs are women from the established immigrant communities, but also labour migrants from the newer EU member states have found their way to the cleaning industry. Studies have drawn attention to immigrants’ low position in the cleaning industry and their increased risk of work injuries. This article is based on a case study of an intervention called “Make a Difference” designed to improve the work environment among cleaners at a multi-ethnic workplace. We used semi-structured interviews, photo logs, observation and participation to investigate how the cleaners experienced their work environment. The cleaners reported an overload of heavy work, related to the concept of a classroom’s “readiness for cleaning”, and they expressed strained social relations and communication in addition to a lack of social recognition and invisibility at the workplace, a school. We analysed these psychosocial work environmental problems by investigating the different forms of social relationships and communication within the group of cleaners, and between the cleaners and the teachers and pupils at the school. Moreover, we discussed why the intervention, based on training of language and cleaning skills and social interaction, only partially improved the cleaners’ psychosocial work environment problems. In this article, we argue that social divisions based on ethnicity between the new and the established group of cleaners, combined with their marginal position and poor work organisation at the school, reinforced the cleaners’ experiences of psychosocial work environment problems. This article suggests that increased effort towards social inclusion at work and improved work organisation, especially for the new labour migrants from newer EU-countries, should be considered. PMID:23263660

  15. Overview of cleaner production as a result of clean technology research in Vietnam

    SciTech Connect

    Sam, D.V.; Nhan, T.V.; Lan, N.N.

    1996-12-31

    Vietnam is beginning its industrialization process, and it currently lacks the capital necessary for expensive pollution control and treatment systems. Pollution strategies are critical for the country. This study evaluates the present status of industry and the pollution problems associated with industrial development in Vietnam. The purpose of the study is to identify sectors that may have potential for promoting cleaner production practices. 4 refs.

  16. Evaluation of cleaners for photovoltaic modules exposed in an outdoor environment

    NASA Technical Reports Server (NTRS)

    Knapp, W. D.

    1979-01-01

    Power recovery of silicone encapsulated and glass covered photovoltaic modules, exposed for two years to a suburban environment, was measured after washing with a variety of cleaners including detergents, abrasive soap, and hydrocarbon solvents. Silicone encapsulated modules in operating environments may experience significant power losses or require extensive periodic cleaning. Glass front-faced modules in similar situations are much less affected. Organic hydrocarbon solvents or abrasives were found to be about five times more effective than mild detergents in cleaning encapsulated modules.

  17. Fish mucus versus parasitic gnathiid isopods as sources of energy and sunscreens for a cleaner fish

    NASA Astrophysics Data System (ADS)

    Eckes, Maxi; Dove, Sophie; Siebeck, Ulrike E.; Grutter, Alexandra S.

    2015-09-01

    The cleaning behaviour of the bluestreak cleaner wrasse Labroides dimidiatus is extensively used as a model system for understanding cooperation. It feeds mainly on blood-sucking gnathiid isopods and also on the epidermal mucus of client fish; the nutritional quality of these foods, however, is unknown. The epidermal mucus of reef fish contains ultraviolet (UV)-absorbing compounds (mycosporine-like amino acids, MAAs), which are only obtained via the diet; nevertheless, while La. dimidiatus has high amounts of MAAs in its mucus, their source is unknown. Therefore, the energetic value (calories and protein estimated using carbon and nitrogen) and MAA level in gnathiids and mucus from several clients [parrotfishes, wrasses (Labridae), and a snapper (Lutjanidae)] were determined. The energetic value of mucus and gnathiids varied among fishes. Overall, carbon, nitrogen, calories, and protein per dry weight were higher in the mucus of most client species compared to gnathiids. Thus, depending on the client species, mucus may be energetically more advantageous for cleaner wrasse to feed on than gnathiids. UV absorbance, a confirmed proxy for MAA levels, indicated high MAA levels in mucus, whereas gnathiids had no detectable MAAs. This suggests that La. dimidiatus obtain MAAs from mucus but not from gnathiids. Hence, in addition to energy, the mucus of some clients also provides La. dimidiatus with the added bonus of UV-absorbing compounds. This may explain why cleaner fish prefer to feed on mucus over gnathiid isopods. The likely costs and benefits to clients of the removal of UV protecting mucus and parasitic gnathiids, respectively, and the variation in benefits gained by cleaner fish from feeding on these foods may explain some variation in cooperation levels in cleaning interactions.

  18. Stimulation of dopamine D₁ receptor improves learning capacity in cooperating cleaner fish.

    PubMed

    Messias, João P M; Santos, Teresa P; Pinto, Maria; Soares, Marta C

    2016-01-27

    Accurate contextual decision-making strategies are important in social environments. Specific areas in the brain are tasked to process these complex interactions and generate correct follow-up responses. The dorsolateral and dorsomedial parts of the telencephalon in the teleost fish brain are neural substrates modulated by the neurotransmitter dopamine (DA), and are part of an important neural circuitry that drives animal behaviour from the most basic actions such as learning to search for food, to properly choosing partners and managing decisions based on context. The Indo-Pacific cleaner wrasse Labroides dimidiatus is a highly social teleost fish species with a complex network of interactions with its 'client' reef fish. We asked if changes in DA signalling would affect individual learning ability by presenting cleaner fish two ecologically different tasks that simulated a natural situation requiring accurate decision-making. We demonstrate that there is an involvement of the DA system and D1 receptor pathways on cleaners' natural abilities to learn both tasks. Our results add significantly to the growing literature on the physiological mechanisms that underlie and facilitate the expression of cooperative abilities. PMID:26791613

  19. TagCleaner: Identification and removal of tag sequences from genomic and metagenomic datasets

    PubMed Central

    2010-01-01

    Background Sequencing metagenomes that were pre-amplified with primer-based methods requires the removal of the additional tag sequences from the datasets. The sequenced reads can contain deletions or insertions due to sequencing limitations, and the primer sequence may contain ambiguous bases. Furthermore, the tag sequence may be unavailable or incorrectly reported. Because of the potential for downstream inaccuracies introduced by unwanted sequence contaminations, it is important to use reliable tools for pre-processing sequence data. Results TagCleaner is a web application developed to automatically identify and remove known or unknown tag sequences allowing insertions and deletions in the dataset. TagCleaner is designed to filter the trimmed reads for duplicates, short reads, and reads with high rates of ambiguous sequences. An additional screening for and splitting of fragment-to-fragment concatenations that gave rise to artificial concatenated sequences can increase the quality of the dataset. Users may modify the different filter parameters according to their own preferences. Conclusions TagCleaner is a publicly available web application that is able to automatically detect and efficiently remove tag sequences from metagenomic datasets. It is easily configurable and provides a user-friendly interface. The interactive web interface facilitates export functionality for subsequent data processing, and is available at http://edwards.sdsu.edu/tagcleaner. PMID:20573248

  20. A novel cleaner for colloidal silica abrasive removal in post-Cu CMP cleaning

    NASA Astrophysics Data System (ADS)

    Haiwen, Deng; Baimei, Tan; Baohong, Gao; Chenwei, Wang; Zhangbing, Gu; Yan, Zhang

    2015-10-01

    A novel cleaning solution, named FA/O alkaline cleaner, was proposed and demonstrated in the removal of colloidal silica abrasives. In order to remove both the chemical and physical absorbed colloidal silica abrasives, an FA/OII chelating agent and non-ionic surfactant were added into the cleaner. By varying the concentration of chelating agent and non-ionic surfactant, a series of experiments were performed to determine the best cleaning results. This paper discusses the mechanism of the removal of colloidal silica abrasives with a FA/O alkaline cleaner. Based on the experiment results, it is concluded that both the FA/OII chelating and non-ionic surfactant could benefit the removal of colloidal silica abrasives. When the concentration of FA/OII chelating agent and FA/O non-ionic surfactant reached the optima value, it was demonstrated that silica abrasives could be removed efficiently by this novel cleaning solution. Project supported by the Specific Project Items No. 2 in National Long-Term Technology Development Plan (No. 2009zx02308-003) and the Hebei Province Department of Education Fund (No. QN2014208).

  1. Downhole cleaner assembly for cleansing lubricant of downhole turbo-machines within wells

    SciTech Connect

    Erickson, J.W.; Petrie, H.L.

    1981-04-28

    While in a well, a downhole turbo-machine of a series of turbine stages and pump stages is driven by power fluid circulated into the turbine stages from the surface. A branch stream from the power fluid passes through a centrifugal cleaner and is cleansed of solid material. The turbine stages drive the centrifugal cleaner. The cleansed stream becomes lubricant for the turbomachine bearings. On the turbine side, the lubricant stream passes at substantially cleaner discharge pressure into longitudinal passages between turbine shrouds and an alignment tube to journal bearings and journals located between turbine stage stators and a drive shaft driven by the turbines. Annular channels between separate shrouds effect communication between the longitudinal passages between the shrouds and the alignment tube. On the pump side, the lubricant stream is first directed so that it can act on a thrust bearing runner and apply a force in opposition to an otherwise unbalanced axial force. A low pressure discharge from the thrust bearing runner supplies galleries that feed journal and journal bearings of the pump stage stators. Gallery pressure is maintained positive with respect to the pump stage bearings by a feed to the gallery in excess of bleed-out of the bearings. A check valve relieves any excess gallery pressure to that of the next to the last turbine stage fluid passage. Lubricant bleeds from the journals and journal bearings into the fluid stream passing through the turbine pumps.

  2. Functional morphology and efficiency of the antenna cleaner in Camponotus rufifemur ants

    PubMed Central

    Hackmann, Alexander; Delacave, Henry; Robinson, Adam; Labonte, David; Federle, Walter

    2015-01-01

    Contamination of body surfaces can negatively affect many physiological functions. Insects have evolved different adaptations for removing contamination, including surfaces that allow passive self-cleaning and structures for active cleaning. Here, we study the function of the antenna cleaner in Camponotus rufifemur ants, a clamp-like structure consisting of a notch on the basitarsus facing a spur on the tibia, both bearing cuticular ‘combs’ and ‘brushes’. The ants clamp one antenna tightly between notch and spur, pull it through, and subsequently clean the antenna cleaner itself with the mouthparts. We simulated cleaning strokes by moving notch or spur over antennae contaminated with fluorescent particles. The notch removed particles more efficiently than the spur, but both components eliminated more than 60% of the particles with the first stroke. Ablation of bristles, brush and comb strongly reduced the efficiency, indicating that they are essential for cleaning. To study how comb and brush remove particles of different sizes, we contaminated antennae of living ants, and anaesthetized them immediately after they had performed the first cleaning stroke. Different-sized beads were trapped in distinct zones of the notch, consistent with the gap widths between cuticular outgrowths. This suggests that the antenna cleaner operates like a series of sieves that remove the largest objects first, followed by smaller ones, down to the smallest particles that get caught by adhesion. PMID:26587270

  3. Industrial-hygiene report, perchloroethylene at Key Club Cleaners, Skokie, Illinois, July 18, 1979

    SciTech Connect

    Roberts, D.R.

    1980-08-13

    An on site visit was made to the Key Club Cleaners located in Skokie, Illinois as part of an industrywide mortality and industrial hygiene study of the exposure of dry cleaning workers to perchloroethylene (PCE). Current exposure levels of PCE were determined at the facility using battery operated pumps and charcoal tubes. The company used PCE as a dry cleaning solvent since cleaning began at the site in October of 1978. The facility was housed in a one story building with dimensions of about 40 feet by 100 feet. About 90 gallons of PCE were consumed each month during dry cleaning and about 1800 pounds of clothing were dry cleaned each week. The work force numbered nine persons. The time weighted average exposures to PCE of the dry cleaner/spotter and the presser were 49 and 8.5 parts per million (ppm), respectively. The 5 minute peak exposures to the dry cleaner measured during garment transfer ranged from 316 to 447ppm PCE. While the time weighted average exposures were within recommended guidelines, the peak samples during transfer exceeded all recommended levels. The author recommends measures to lower the exposure level.

  4. Generalized rule application in bluestreak cleaner wrasse (Labroides dimidiatus): using predator species as social tools to reduce punishment.

    PubMed

    Wismer, Sharon; Grutter, Alexandra; Bshary, Redouan

    2016-07-01

    Generalized rule application promotes flexible behavior by allowing individuals to adjust quickly to environmental changes through generalization of previous learning. Here, we show that bluestreak 'cleaner' wrasse (Labroides dimidiatus) uses generalized rule application in their use of predators as social tools against punishing reef fish clients. Punishment occurs as cleaners do not only remove ectoparasites from clients, but prefer to feed on client mucus (constituting cheating). We tested for generalized rule application in a series of experiments, starting by training cleaners to approach one of two fish models in order to evade punishment (by chasing) from a 'cheated' client model. Cleaners learned this task only if the safe haven was a predator model. During consecutive exposure to pairs of novel species, including exotic models, cleaners demonstrated generalization of the 'predators-are-safe-havens' rule by rapidly satisfying learning criteria. However, cleaners were not able to generalize to a 'one-of-two-stimuli-presents-a-safe-haven' rule, as they failed to solve the task when confronted with either two harmless fish models or two predator models. Our results emphasize the importance of ecologically relevant experiments to uncover complex cognitive processes in non-human animals, like generalized rule learning in the context of social tool use in a fish. PMID:27016339

  5. On-line monitoring of benzene air concentrations while driving in traffic by means of isotopic dilution gas chromatography/mass spectrometry.

    PubMed

    Davoli, E; Cappellini, L; Moggi, M; Ferrari, S; Fanelli, R

    1996-01-01

    There is no shortage of information about the average benzene concentrations in urban air, but there is very little about microenvironmental exposure, such as in-vehicle concentrations while driving in various traffic conditions, while refuelling, or while in a parking garage. The main reason for this lack of data is that no analytical instrumentation has been available to measure on-line trace amounts of benzene in such situations. We have recently proposed a highly accurate, high-speed cryofocusing gas chromatography/mass spectrometry (GC/MS) system for monitoring benzene concentrations in air. Accuracy of the analytical data is achieved by enrichment of the air sample before trapping, with a stable isotope permeation tube system. The same principles have been applied to a new instrument, specifically designed for operation on an electric vehicle (Ducato Elettra, Fiat). The zero emission vehicle and the fully transportable, battery-operated GC/MS system provide a unique possibility of monitoring benzene exposure in real everyday situations such as while driving, refuelling, or repairing a car. All power consumptions have been reduced so as to achieve a battery-operated GC/MS system. Liquid nitrogen cryofocusing has been replaced by a packed, inductively heated, graphitized charcoal microtrap. The instrument has been mounted on shock absorbers and installed in the van. The whole system has been tested in both fixed and mobile conditions. The maximum monitoring period without external power supply is 6 h. The full analytical cycle is 4 min, allowing close to real-time monitoring, and the minimum detectable level is 1 microgram/m3 for benzene. In-vehicle monitoring showed that, when recirculation was off and ventilation on, i.e., air from outside the vehicle was blown inside, concentrations varied widely in different driving conditions: moving from a parking lot into normal traffic on an urban traffic condition roadway yielded an increase in benzene concentration

  6. Materials Compatibility and Aging for Flux and Cleaner Combinations.

    SciTech Connect

    Archuleta, Kim; Piatt, Rochelle

    2015-01-01

    A materials study of high reliability electronics cleaning is presented here. In Phase 1, mixed type substrates underwent a condensed contaminants application to view a worst- case scenario for unremoved flux with cleaning agent residue for parts in a silicone oil filled environment. In Phase 2, fluxes applied to copper coupons and to printed wiring boards underwent gentle cleaning then accelerated aging in air at 65% humidity and 30 O C. Both sets were aged for 4 weeks. Contaminants were no-clean (ORL0), water soluble (ORH1 liquid and ORH0 paste), and rosin (RMA; ROL0) fluxes. Defluxing agents were water, solvents, and engineered aqueous defluxers. In the first phase, coupons had flux applied and heated, then were placed in vials of oil with a small amount of cleaning agent and additional coupons. In the second phase, pairs of copper coupons and PWB were hand soldered by application of each flux, using tin-lead solder in a strip across the coupon or a set of test components on the PWB. One of each pair was cleaned in each cleaning agent, the first with a typical clean, and the second with a brief clean. Ionic contamination residue was measured before accelerated aging. After aging, substrates were removed and a visual record of coupon damage made, from which a subjective rank was applied for comparison between the various flux and defluxer combinations; more corrosion equated to higher rank. The ORH1 water soluble flux resulted in the highest ranking in both phases, the RMA flux the least. For the first phase, in which flux and defluxer remained on coupons, the aqueous defluxers led to worse corrosion. The vapor phase cleaning agents resulted in the highest ranking in the second phase, in which there was no physical cleaning. Further study of cleaning and rinsing parameters will be required.

  7. Analysis of air-mass modification over Poland and Romania by means of multiwavelength lidars - a case study 19-21/07/2014

    NASA Astrophysics Data System (ADS)

    Costa-Surós, Montserrat; Stachlewska, Iwona S.; Nicolae, Doina; Nemuc, Anca; Janicka, Lucja; Markowicz, Krzysztof M.; Belegante, Livio; Talianu, Camelia; Heese, Birgit; Engelmann, Ronny

    2015-04-01

    A case study of air-mass modification over Poland and Romania, assessing the role of the Carpathian Mountains, during 19-21/07/2014 is analyzed. The study is based mainly on measurements taken by two multiwavelength Raman lidars at two different sites: the Radiative Transfer Laboratory (RT-Lab) at the Faculty of Physics of the University of Warsaw in Warsaw (Poland) and at the RADO site of the National Institute of R&D in Optoelectronics in Magurele (Romania). These data were complemented with meteorological data collected at two other sites: SolarAOT in Strzyżów (Poland) - equipped also with AERONET photometer and CHM15k ceilometer, and in Cluj (Romania). The RADO site, with its 7-wavelength aerosol-Raman-depolarization lidar (RALi) is integrated into EARLINET network. The RT-Lab site, with its 8-wavelength aerosol-Raman-depolarization (PollyXT-type) lidar, started the procedure to join in EARLINET last year. Moreover, RT-Lab and SolarAOT sites are part of the Poland AOD network. The analysis is focused on evaluating both multi-wavelength lidar data sets in order to search for similarities and differences in the vertical profiles describing the atmospheric layers above the two stations. Accordingly to GDAS Hysplit 4-days backward trajectory ending up in Magurele at 0.5, 1.5 and 3 km an air-mass from western Europe entered Poland from the north-west on 19/07/2014, descended on the following day over the Poland AOD station in Strzyżów, followed by Cluj and end up at Magurele on 21/07/2014. As the four stations are located along a north-west to south-east line the objective was to evaluate the aerosol properties of the air flow transported over Poland and further to Romania. At both sites, backscatter profiles at 355, 532 and 1064nm, extinction profiles at 355 and 532nm, and depolarization profiles at 532nm and 355nm, show distinctly layered structure in the atmosphere. Along with these we used data from stations in Strzyżów and Cluj as well as information

  8. The Relationship of Loss, Mean Age of Air and the Distribution of CFCs to Stratospheric Circulation and Implications for Atmospheric Lifetimes

    NASA Technical Reports Server (NTRS)

    Douglass, A. R.; Stolarski, R. S.; Schoeberl, M. R.; Jackman, C. H.; Guptal, M. L.; Newman, P. A.; Nielsen, J. E.; Fleming, E. L.

    2007-01-01

    Man-made molecules called chlorofluorcarbons (CFCs) are broken apart in the stratosphere by high energy light, and the reactive chlorine gases that come from them cause the ozone hole. Since the ozone layer stops high energy light from reaching low altitudes, CFCs must be transported to high altitudes to be broken apart. The number of molecules per volume (the density) is much smaller at high altitudes than near the surface, and CFC molecules have a very small chance of reaching that altitude in any particular year. Many tons of CFCs were put into the atmosphere during the end of the last century, and it will take many years for all of them to be destroyed. Each CFC has an atmospheric lifetime that depends on the amount of energy required to break them apart. Two of the gases that were made the most are CFC13 and CF2C12. It takes more energy to break apart CF2C12 than CFC13, and its lifetime is about 100 years, nearly twice as long as the lifetime for CFC13. It is hard to figure out the lifetimes from surface measurements because we don't know exactly how much was released into the air each year. Atmospheric models are used to predict what will happen to ozone and other gases as the CFCs decrease and other gases like C02 continue to increase during the next century. CFC lifetimes are used to predict future concentrations and all assessment models use the predicted future concentrations. The models have different circulations and the amount of CFC lost according to the model may not match the loss that is expected according to the lifetime. In models the amount destroyed per year depends on how fast the model pushes air into the stratosphere and how much goes to high altitudes each year. This paper looks at the way the model circulation changes the lifetimes, and looks at measurements that tell us which model is more realistic. Some models do a good job reproducing the age-of-air, which tells us that these models are circulating the stratospheric air at the right

  9. Cold air systems: Sleeping giant

    SciTech Connect

    MacCracken, C.D. )

    1994-04-01

    This article describes how cold air systems help owners increase the profits from their buildings by reducing electric costs and improving indoor air quality through lower relative humidity levels. Cold air distribution involves energy savings, cost savings, space savings, greater comfort, cleaner air, thermal storage, tighter ducting, coil redesign, lower relative humidities, retrofitting, and improved indoor air quality (IAQ). It opens a door for architects, engineers, owners, builders, environmentalists, retrofitters, designers, occupants, and manufacturers. Three things have held up cold air's usage: multiple fan-powered boxes that ate up the energy savings of primary fans. Cold air room diffusers that provided inadequate comfort. Condensation from ducts, boxes, and diffusers. Such problems have been largely eliminated through research and development by utilities and manufacturers. New cold air diffusers no longer need fan powered boxes. It has also been found that condensation is not a concern so long as the ducts are located in air conditioned space, such as drop ceilings or central risers, where relative humidity falls quickly during morning startup.

  10. Impacts of residential heating intervention measures on air quality and progress towards targets in Christchurch and Timaru, New Zealand

    NASA Astrophysics Data System (ADS)

    Scott, Angelique J.; Scarrott, Carl

    2011-06-01

    Elevated wintertime particulate concentrations in the New Zealand cities of Christchurch and Timaru are mostly attributed to the burning of wood and coal for residential heating. A carrot-and-stick approach was adopted for managing air quality in Christchurch, where strict intervention measures were introduced together with a residential heater replacement programme to encourage householders to change to cleaner forms of heating. A similar approach was only recently implemented for Timaru. This paper presents the results of a partial accountability analysis, where the impact of these measures on the target source, PM 10 emissions, and PM 10 concentrations are quantified. A statistical model was developed to estimate trends in the concentrations, which were tested for significance after accounting for meteorological effects, and to estimate the probability of meeting air quality targets. Results for Christchurch and Timaru are compared to illustrate the impacts of differing levels of intervention on air quality. In Christchurch, approximately 34,000 (76%) open fires and old solid fuel burners were replaced with cleaner heating technology from 2002 to 2009, and total open fires and solid fuel burner numbers decreased by 45%. Over the same time period, estimated PM 10 emissions reduced by 71% and PM 10 concentrations by 52% (maxima), 36% (winter mean), 26% (winter median) and 41% (meteorology-adjusted winter means). In Timaru, just 3000 (50%) open fires and old solid fuel burners were replaced from 2001 to 2008, with total open fire and solid fuel burner numbers reduced by 24%. PM 10 emissions declined by 32%, with low reductions in the PM 10 concentrations (maxima decreased by 7%, winter means by 11% and winter medians by 3%). These findings, supported by the results of the meteorology corrected trend analysis for Christchurch, strongly indicate that the combination of stringent intervention measures and financial incentives has led to substantial air quality

  11. Superfund Record of Decision (EPA Region 2): Garden State Cleaners, Buena Borough, Atlantic County, NJ. (First remedial action), September 1991. Final report

    SciTech Connect

    Not Available

    1991-09-26

    The 3,000-square-foot Garden State Cleaners (GSC) site is an active dry cleaning operation in Minotola, Bueno Borough, Atlantic County, New Jersey. Land use in the area is residential and commercial, and local residents obtain drinking water from the Borough municipal water supply system. From 1966 to the present, dry cleaning activities using PCE were conducted at the GSC site, and until 1985, wastes were discharged through pipes directly into the ground. In 1984, State investigations showed elevated levels of PCE in ground water adjacent to and downgradient from the GSC and SJCC facilities, and elevated levels of PCE and TCE in onsite soil. The selected remedial action for the site includes treating onsite approximately 1,600 cubic yards of contaminated soil using in-situ vapor extraction; treating the contaminated wastewater from the vapor extraction processes onsite using an air stripping column; treating air emissions using carbon adsorption units; pumping and onsite treatment of contaminated ground water using air stripping and carbon adsorption; reinjecting the treated ground water upgradient from the site; regenerating spent activated carbon from both treatment processes offsite; conducting long-term ground water monitoring; and implementing temporary institutional controls. The estimated present worth cost for the remedial action at the GSC site is $5,451,000, which includes an estimated annual O and M cost of $249,500 for 70 years.

  12. Integrated Hydrologic Science and Environmental Engineering Observatory: CLEANER's Vision for the WATERS Network

    NASA Astrophysics Data System (ADS)

    Montgomery, J. L.; Minsker, B. S.; Schnoor, J.; Haas, C.; Bonner, J.; Driscoll, C.; Eschenbach, E.; Finholt, T.; Glass, J.; Harmon, T.; Johnson, J.; Krupnik, A.; Reible, D.; Sanderson, A.; Small, M.; van Briesen, J.

    2006-05-01

    With increasing population and urban development, societies grow more and more concerned over balancing the need to maintain adequate water supplies with that of ensuring the quality of surface and groundwater resources. For example, multiple stressors such as overfishing, runoff of nutrients from agricultural fields and confined animal feeding lots, and pathogens in urban stormwater can often overwhelm a single water body. Mitigating just one of these problems often depends on understanding how it relates to others and how stressors can vary in temporal and spatial scales. Researchers are now in a position to answer questions about multiscale, spatiotemporally distributed hydrologic and environmental phenomena through the use of remote and embedded networked sensing technologies. It is now possible for data streaming from sensor networks to be integrated by a rich cyberinfrastructure encompassing the innovative computing, visualization, and information archiving strategies needed to cope with the anticipated onslaught of data, and to turn that data around in the form of real-time water quantity and quality forecasting. Recognizing this potential, NSF awarded $2 million to a coalition of 12 institutions in July 2005 to establish the CLEANER Project Office (Collaborative Large-Scale Engineering Analysis Network for Environmental Research; http://cleaner.ncsa.uiuc.edu). Over the next two years the project office, in coordination with CUAHSI (Consortium of Universities for the Advancement of Hydrologic Science, Inc.; http://www.cuahsi.org), will work together to develop a plan for a WATer and Environmental Research Systems Network (WATERS Network), which is envisioned to be a collaborative scientific exploration and engineering analysis network, using high performance tools and infrastructure, to transform our scientific understanding of how water quantity, quality, and related earth system processes are affected by natural and human-induced changes to the environment

  13. Controlling Indoor Air Pollution from Moxibustion

    PubMed Central

    Lu, Chung-Yen; Kang, Sy-Yuan; Liu, Shu-Hui; Mai, Cheng-Wei; Tseng, Chao-Heng

    2016-01-01

    Indoor air quality (IAQ) control of hospitals plays a critical role in protecting both hospital staffs and patients, particularly those who are highly susceptible to the adverse effects of indoor noxious hazards. However, moxibustion in outpatient departments (OPDs) of traditional Chinese medicine (TCM) may be a source of indoor air pollution in hospitals. Some studies have investigated indoor air pollution during moxibustion in Chinese medicine clinics (CMCs) and moxibustion rooms, demonstrating elevated air pollutants that pose a threat to the health of medical staff and patients. Our study investigated the indoor air pollutants of indoor carbon dioxide (CO2), carbon monoxide (CO), formaldehyde (HCHO), total volatile organic compounds (TVOCs), airborne particulate matter with a diameter of ≤10 µm (PM10) and ≤2.5 µm (PM2.5) during moxibustion in an acupuncture and moxibustion room of the OPD in a hospital in Taipei. To evaluate the different control strategies for indoor air pollution from moxibution, a comparison of air pollutants during moxibution among the methods of using alternative old moxa wools, local exhaust ventilation and an air cleaner was conducted. In this study, burning alternative old moxa wools for moxibustion obviously reduced all gaseous pollutants except for aerosols comparing burning fresh moxa wools. Using local exhaust ventilation reduced most of the aerosols after burning moxa. We also found that using an air cleaner was inefficient for controlling indoor air pollutants, particularly gaseous pollutants. Therefore, combining replacing alternative old moxa wools and local exhaust ventilation could be a suitable design for controlling indoor air pollution during moxibustion therapy. PMID:27331817

  14. Controlling Indoor Air Pollution from Moxibustion.

    PubMed

    Lu, Chung-Yen; Kang, Sy-Yuan; Liu, Shu-Hui; Mai, Cheng-Wei; Tseng, Chao-Heng

    2016-01-01

    Indoor air quality (IAQ) control of hospitals plays a critical role in protecting both hospital staffs and patients, particularly those who are highly susceptible to the adverse effects of indoor noxious hazards. However, moxibustion in outpatient departments (OPDs) of traditional Chinese medicine (TCM) may be a source of indoor air pollution in hospitals. Some studies have investigated indoor air pollution during moxibustion in Chinese medicine clinics (CMCs) and moxibustion rooms, demonstrating elevated air pollutants that pose a threat to the health of medical staff and patients. Our study investigated the indoor air pollutants of indoor carbon dioxide (CO₂), carbon monoxide (CO), formaldehyde (HCHO), total volatile organic compounds (TVOCs), airborne particulate matter with a diameter of ≤10 µm (PM10) and ≤2.5 µm (PM2.5) during moxibustion in an acupuncture and moxibustion room of the OPD in a hospital in Taipei. To evaluate the different control strategies for indoor air pollution from moxibution, a comparison of air pollutants during moxibution among the methods of using alternative old moxa wools, local exhaust ventilation and an air cleaner was conducted. In this study, burning alternative old moxa wools for moxibustion obviously reduced all gaseous pollutants except for aerosols comparing burning fresh moxa wools. Using local exhaust ventilation reduced most of the aerosols after burning moxa. We also found that using an air cleaner was inefficient for controlling indoor air pollutants, particularly gaseous pollutants. Therefore, combining replacing alternative old moxa wools and local exhaust ventilation could be a suitable design for controlling indoor air pollution during moxibustion therapy. PMID:27331817

  15. Challenges Achieved By Innovative Technologies Our Link to a Safer, Cleaner, Healthier Tomorrow - 12369

    SciTech Connect

    Henderson, Heidi; Shoffner, Peggy; Lagos, Leonel E.

    2012-07-01

    The River Corridor Closure Project is the nation's largest environmental cleanup closure project where innovative technologies are being utilized to overcome DOE's environmental clean-up challenges. DOE provides a Technology Needs Statement that specifies their on-site challenges and the criteria to overcome those challenges. This allows for both the private sector and federally funded organizations to respond with solutions that meet their immediate needs. DOE selects the company based on their ability to reduce risk to human health and the environment, improve efficiency of the cleanup, and lower costs. These technologies are our link to a cleaner, safer, healthier tomorrow. (authors)

  16. Cleaner Technology in the Hard Disk Drive Manufacturing Industry: A Case Study

    NASA Astrophysics Data System (ADS)

    Moolla, Premchai; Chompu-inwai, Rungchat

    2010-10-01

    The objectives of this research are to improve raw material and energy consumption efficiency, as well as reduce defects and the use of chemicals in the arm coil assembly process of hard disk drive manufacturing in the case study company by applying the Cleaner Technology concepts. The four main sequential steps used in this research were: (1) pre-assessment, (2) assessment, (3) feasibility study, and (4) implementation. In the first step, raw data, such as process flows, raw material usage and defects data were collected. In the second step, the loss during production and causes of loss were analyzed. Opportunities to reduce raw material, chemical and energy wastage could then be recommended. The next step was to evaluate the feasibility and potential benefits of a particular Cleaner Technology opportunity. Finally, in the last step, after a thorough evaluation and implementation of the opportunities to apply Cleaner Technology, the results showed that arm coil defects could be reduced by improving the production process using the ECRS technique. ECRS stands for Eliminate, Combine, Rearrange and Simplify. This improvement reduced arm coil defect rates from 0.48% to 0.15%, thus saving approximately 139,638 Thai Baht per month. In addition, production stoppage decision made by workers was used to increase employee involvement in defect detection. Allowing workers to participate in such a decision was an effective way to reduce defect rate and could motivate workers to produce a better quality job. This resulted in arm coil defects reducing from 0.41% to 0.025%, with about 74,562 Thai Baht per month saving. Additionally, an increase in the efficiency of electricity consumption occurred, by increasing the speed of the infrared oven conveyor belt, improving average productivity from 533 pieces/hour to 560 pieces/hour, without adversely affecting product costs and quality, thus producing products of up to the value of 206,242 Thai Baht per month. Furthermore, the new

  17. COST ANALYSIS OF ACTIVATED CARBON VERSUS PHOTOCATALYTIC OXIDATION FOR REMOVING ORGANIC COMPOUNDS FROM INDOOR AIR

    EPA Science Inventory

    A cost comparison has been conducted of 1 m3/s indoor air cleaners using granular activated carbon (GAC) vs. photocatalytic oxidation (PCO) for treating a steady-state inlet volatile organic compound (VOC) concentration of 0.3 mg/m3. The commercial GAC unit was costed assuming t...

  18. TETRACHLOROETHYLENE EXPOSURE AND RISK OF SCHIZOPHRENIA: OFFSPRING OF DRY CLEANERS IN A POPULATION BIRTH COHORT, PRELIMINARY FINDINGS

    PubMed Central

    Perrin, Mary C.; Opler, Mark G.; Harlap, Susan; Harkavy-Friedman, Jill; Kleinhaus, Karine; Nahon, Daniella; Fennig, Shmuel; Susser, Ezra S.; Malaspina, Dolores

    2009-01-01

    Tetrachloroethylene is a solvent used in dry cleaning with reported neurotoxic effects. Using proportional hazard methods, we examined the relationship between parental occupation as a dry cleaner and risk for schizophrenia in a prospective population-based cohort of 88, 829 offspring born in Jerusalem from 1964 through 1976, followed from birth to age 21–33 years. Of 144 offspring whose parents were dry cleaners, 4 developed schizophrenia. We observed an increased incidence of schizophrenia in offspring of parents who were dry cleaners (RR = 3.4, 95% CI, 1.3–9.2, p=0.01). Tetrachloroethylene exposure warrants further investigation as a risk factor for schizophrenia. PMID:17113267

  19. Drainpipe cleaners

    MedlinePlus

    ... difficulty) BLOOD Severe change in acid level of blood (pH balance), which leads to damage in all of the body organs EYES, EARS, NOSE, AND THROAT Loss of vision ... SYSTEM Blood in the stool Burns and possible holes (perforation) ...

  20. Jewelry cleaners

    MedlinePlus

    Wax PM, Yarema M. Corrosives. In: Shannon MW, Borron SW, Burns MJ, eds. Haddad and Winchester's Clinical ... ed. Philadelphia, PA: Elsevier Saunders; 2007:chap 98. Wax PM, Young A. Caustics. In: Marx JA, Hockberger ...

  1. Cleaner Landfills

    NASA Technical Reports Server (NTRS)

    2000-01-01

    Osmotek, Inc. developed the Direct Osmosis treatment system through SBIR funding from Ames Research Center. Using technology originally developed for flight aboard the Space Station, the company brought it to their commercial water purification treatment system, Direct Osmosis. This water purification system uses a direct osmosis process followed by a reverse osmosis treatment. Because the product extracts water from a waste product, Osmotek is marketing the unit for use in landfills. The system can treat leachate (toxic chemicals leached into a water source), by filtering the water and leaving behind the leahcate. The leachate then becomes solidified into substance that can not seep into water.

  2. Jewelry cleaners

    MedlinePlus

    ... eyes, ears, lips, or tongue Vision loss GASTROINTESTINAL SYSTEM Abdominal pain (severe) Bloody stools Burns and possible ... burned skin (skin debridement) Washing of the skin (irrigation), perhaps every few hours for several days

  3. Drainpipe cleaners

    MedlinePlus

    ... the nose, eyes, ears, lips, or tongue GASTROINTESTINAL SYSTEM Blood in the stool Burns and possible holes ( ... abdominal pain Vomiting Vomiting blood HEART AND CIRCULATORY SYSTEM Collapse Low blood pressure that develops rapidly SKIN ...

  4. ``Cleaner'' shrimps?

    NASA Astrophysics Data System (ADS)

    Spotte, Stephen

    1998-03-01

    In the western North Atlantic, some shrimps of the genus Periclimenes interact with fishes. Accoring to prevailing wisdom, these shrimps “clean” the fishes (i.e. they remove parasites, diseased tissue, or detritus from their exposed surfaces). With one exception, the numerous literature entries recite anecdotal evidence. The only report based on empirical studies has dismissed the notion that “cleaner” shrimps perform the services attributed to them, leaving the nature of the relationship unresolved.

  5. Male cleaner wrasses adjust punishment of female partners according to the stakes

    PubMed Central

    Raihani, Nichola J.; Pinto, Ana I.; Grutter, Alexandra S.; Wismer, Sharon; Bshary, Redouan

    2012-01-01

    Punishment is an important deterrent against cheating in cooperative interactions. In humans, the severity of cheating affects the strength of punishment which, in turn, affects the punished individual's future behaviour. Here, we show such flexible adjustments for the first time in a non-human species, the cleaner wrasse (Labroides dimidiatus), where males are known to punish female partners. We exposed pairs of cleaners to a model client offering two types of food, preferred ‘prawn’ items and less-preferred ‘flake’ items. Analogous to interactions with real clients, eating a preferred prawn item (‘cheating’) led to model client removal. We varied the extent to which female cheating caused pay-off reduction to the male and measured the corresponding severity of male punishment. Males punished females more severely when females cheated during interactions with high value, rather than low value, model clients; and when females were similar in size to the male. This pattern may arise because, in this protogynous hermaphrodite, cheating by similar-sized females may reduce size differences to the extent that females change sex and become reproductive competitors. In response to more severe punishment from males, females behaved more cooperatively. Our results show that punishment can be adjusted to circumstances and that such subtleties can have an important bearing on the outcome of cooperative interactions. PMID:21676980

  6. Exposure of pregnant women to cookstove-related household air pollution in urban and periurban Trujillo, Peru.

    PubMed

    St Helen, Gideon; Aguilar-Villalobos, Manuel; Adetona, Olorunfemi; Cassidy, Brandon; Bayer, Charlene W; Hendry, Robert; Hall, Daniel B; Naeher, Luke P

    2015-01-01

    Although evidence suggests associations between maternal exposure to air pollution and adverse birth outcomes, pregnant women's exposure to household air pollution in developing countries is understudied. Personal exposures of pregnant women (N = 100) in Trujillo, Peru, to air pollutants and their indoor concentrations were measured. The effects of stove-use-related characteristics and ambient air pollution on exposure were determined using mixed-effects models. Significant differences in 48-hour kitchen concentrations of particulate matter (PM2.5), carbon monoxide (CO), and nitrogen dioxide (NO2) concentrations were observed across fuel types (p < 0.05). Geometric mean PM2.5 concentrations where 112 μg/m(3) (confidence limits [CLs]: 52, 242 μg/m(3)) and 42 μg/m(3) (21, 82 μg/m(3)) in homes where wood and gas were used, respectively. PM2.5 exposure was at levels that recent exposure-response analyses suggest may not result in substantial reduction in health risks even in homes where cleaner burning gas stoves were used. PMID:24215174

  7. Protective air lock

    DOEpatents

    Evans, Herbert W.

    1976-03-30

    A device suitable for preventing escape and subsequent circulation of toxic gases comprising an enclosure which is sealed by a surrounding air lock, automatic means for partially evacuating said enclosure and said air lock and for ventilating said enclosure and means for disconnecting said enclosure ventilating means, whereby a relatively undisturbed atmosphere is created in said enclosure.

  8. Cardiorespiratory fitness, cardiovascular workload and risk factors among cleaners; a cluster randomized worksite intervention

    PubMed Central

    2012-01-01

    Background Prevalence of cardiovascular risk factors is unevenly distributed among occupational groups. The working environment, as well as lifestyle and socioeconomic status contribute to the disparity and variation in prevalence of these risk factors. High physical work demands have been shown to increase the risk for cardiovascular disease and mortality, contrary to leisure time physical activity. High physical work demands in combination with a low cardiorespiratory fitness infer a high relative workload and an excessive risk for cardiovascular mortality. Therefore, the aim of this study is to examine whether a worksite aerobic exercise intervention will reduce the relative workload and cardiovascular risk factors by an increased cardiorespiratory fitness. Methods/design A cluster-randomized controlled trial is performed to evaluate the effect of the worksite aerobic exercise intervention on cardiorespiratory fitness and cardiovascular risk factors among cleaners. Cleaners are eligible if they are employed ≥ 20 hours/week, at one of the enrolled companies. In the randomization, strata are formed according to the manager the participant reports to. The clusters will be balanced on the following criteria: Geographical work location, gender, age and seniority. Cleaners are randomized to either I) a reference group, receiving lectures concerning healthy living, or II) an intervention group, performing worksite aerobic exercise “60 min per week”. Data collection will be conducted at baseline, four months and 12 months after baseline, at the worksite during working hours. The data collection will consist of a questionnaire-based interview, physiological testing of health and capacity-related measures, and objective diurnal measures of heart rate, physical activity and blood pressure. Primary outcome is cardiorespiratory fitness. Discussion Information is lacking about whether an improved cardiorespiratory fitness will affect the cardiovascular health

  9. Effects on musculoskeletal pain, work ability and sickness absence in a 1-year randomised controlled trial among cleaners

    PubMed Central

    2011-01-01

    Background Only a few workplace initiatives among cleaners have been reported, even though they constitute a job group in great need of health promotion. The purpose of this trial was to evaluate the effect of either physical coordination training or cognitive behavioural training on musculoskeletal pain, work ability and sickness absence among cleaners. Methods A cluster-randomised controlled trial was conducted among 294 female cleaners allocated to either physical coordination training (PCT), cognitive behavioural training (CBTr) or a reference group (REF). Questionnaires about musculoskeletal pain and work ability were completed at baseline and after one year's intervention. Sickness absence data were obtained from the managers' records. Analyses were performed according to the intention-to-treat-principle (ITT). Results No overall reduction in musculoskeletal pain, work ability or sickness absence from either PCT or CBTr compared with REF was found in conservative ITT analyses. However, explorative analyses revealed a treatment effect for musculoskeletal pain of the PCT. People with chronic neck/shoulder pain at baseline were more frequently non-chronic at follow-up after PCT compared with REF (p = 0.05). Conclusions The PCT intervention appeared effective for reducing chronic neck/shoulder pain among the female cleaners. It is recommended that future interventions among similar high-risk job groups focus on the implementation aspects of the interventions to maximise outcomes more distal from the intervention such as work ability and sickness absence. Trial registration ISRCTN: ISRCTN96241850 PMID:22044549

  10. Lipophilic super-absorbent polymer gels as surface cleaners for oil and grease from metal and non-metal surfaces

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The objective of this research is to develop a new cleaning technology based on lipophilic super-absorbent swelling gels for the removal of oil, grease and particulate matters from metal and non-metal surfaces. It is desired that the cleaner is in solid form and is VOC-exempt, HAP-free, non-toxic, n...

  11. Intonational meaning.

    PubMed

    Prieto, Pilar

    2015-01-01

    Traditionally, prosodic studies have focused on the study of intonational form and the study of intonational meaning has been relatively neglected. Similarly, the fields of semantics and pragmatics have paid little attention to the pragmatic uses of intonation. As a result, there is no firm agreement within the linguistic community on how to integrate the analysis of intonational meaning across languages into a unified prosodic, semantic, and pragmatic approach. This article provides an overview of the literature on intonational meaning, describing the recent advances made in the fields of prosody, semantics/pragmatics, and syntax. Several theoretical approaches to explaining the semantics and pragmatics of intonation are presented. A common feature to most frameworks is that intonation (1) should be regarded as an integral part of linguistic grammar; and (2) typically encodes meanings related to the modal aspect of propositions. However, features such as compositionality, duality of structure, and context-dependency are still hotly debated issues. These features will be discussed from different theoretical perspectives, and we will identify potential advances related to the full integration of intonational meaning into dynamic and multidimensional models of meaning. PMID:26263426

  12. New Air Cleaning Strategies for Reduced Commercial Building Ventilation Energy ? FY11 Final Report

    SciTech Connect

    Sidheswaran, Meera; Destaillats, Hugo; Cohn, Sebastian; Sullivan, Douglas P.; Fisk, William J.

    2011-10-31

    The research carried out in this project focuses on developing novel volatile organic compounds (VOCs) air cleaning technologies needed to enable energy-saving reductions in ventilation rates. we targeted a VOC air cleaning system that could enable a 50% reduction in ventilation rates. In a typical commercial HVAC system that provides a mixture of recirculated and outdoor air, a VOC air cleaner in the supply airstream must have a 15% to 20% VOC removal efficiency to counteract a 50% reduction in outdoor air supply.

  13. Unintentional ingestion of cleaners and other substances in an immigrant Mexican population: a qualitative study.

    PubMed

    Crosslin, Katie; Tsai, Ray

    2016-04-01

    Paediatric poisoning is a salient issue worldwide and also affects the USA. In past years, ingestion of household cleaners was the second leading cause of unintentional poisonings in children. All children are at risk for ingestions, although immigrant children may be at greater risk. The purpose of this study was to document child ingestion experiences from toxic household substances via semistructured interviews with immigrant Mexican mothers. Participants were recruited from a paediatric primary care practice in Dallas/Fort Worth, Texas (N=35). Eighteen of 35 respondents (51%) reported that their child, nephew/niece or a friend's child had accidentally ingested a cleaning solution, gasoline or herbal remedy. Of those ingestions, 12 were reportedly from an alternative container, such as a juice box or soda bottle. Improper storage was the primary reason for ingestion. Culturally appropriate home visits and interventions are needed to better prevent ingestion in young children. PMID:25782982

  14. An approach to fault diagnosis of vacuum cleaner motors based on sound analysis

    NASA Astrophysics Data System (ADS)

    Benko, Uros̆; Petrovc̆ic̆, Janko; Juričić, Đani; Tavčar, Joža; Rejec, Jožica

    2005-03-01

    This paper addresses the problem of the detailed quality end-test of vacuum cleaner motors at the end of the manufacturing cycle. For the prototyping purposes a test rig has been constructed and is presented in short. The diagnostic system built hereto takes advantage of vibration, sound and commutation analysis as well as parity relation checks. The paper focuses on the sound analysis module and provides two main contributions. First, an analysis of sound sources is performed and a set of appropriate features is suggested. Second, efficient signal processing algorithms are developed in order to detect and localise bearing faults, defects in fan impeller, improper brush-commutator contacts and rubbing of rotating surfaces. A thorough laboratory study shows that the underlying diagnostic modules provide accurate diagnosis, high sensitivity with respect to faults, and good diagnostic resolution.

  15. Design study and prototype experiment of the KAGRA output mode-cleaner

    NASA Astrophysics Data System (ADS)

    Yano, Kazushiro; Kumeta, Ayaka; Somiya, Kentaro

    2016-05-01

    The sensitivity of the Japanese gravitational-wave detector KAGRA is limited mainly by quantum noise. In order to reduce the quantum noise level, KAGRA employs an output mode-cleaner (OMC), which filters out junk light to clean up the signal and the reference light at the signal extraction port. The proper design of the OMC is a key to achieve the target sensitivity of KAGRA. In this proceeding, we present two results. One is the final result of numerical simulations, from which we determined the optical parameters of the OMC. The other is the latest results of our prototype experiment, the goal of which is to establish the control scheme of the OMC.

  16. A 1949 outbreak of Pontiac fever-like illness in steam condenser cleaners.

    PubMed

    Armstrong, C W; Miller, G B

    1985-01-01

    A 1949 outbreak of flu-like illness in steam-turbine condenser cleaners was investigated in 1979. Clinical and epidemiologic features matched those in previously described outbreaks of nonpneumonic legionellosis (Pontiac fever). Titers by indirect immunofluorescence using polyvalent Legionella pneumophila antigen were significantly higher for late convalescent-phase serum samples from condenser workers than for control serum samples submitted to the Centers for Disease Control. Three workers who had cleaned the condensers on several occasions had experienced recurrent illness associated with these operations, which might support the theory that nonpneumonic legionellosis is caused by an immune reaction to an inhaled antigen or bacterial toxin of L. pneumophila, rather than a true infection. PMID:3888124

  17. NASA Rocket Propulsion Test Replacement Effort for Oxygen System Cleaner - Hydrochlorofluorocarbon (HCFC) 225

    NASA Technical Reports Server (NTRS)

    DeWitt Burns, H.; Mitchell, Mark A.; Lowrey, Nikki M.; Farner, Bruce R.; Ross, H. Richard

    2014-01-01

    Gaseous and liquid oxygen are extremely reactive materials used in bipropellant propulsion systems. Both flight and ground oxygen systems require a high level of cleanliness to support engine performance, testing, and prevent mishaps. Solvents used to clean and verify the cleanliness of oxygen systems and supporting test hardware must be compatible with the system's materials of construction and effective at removing or reducing expected contaminants to an acceptable level. This paper will define the philosophy and test approach used for evaluating replacement solvents for the current Marshall Space Flight Center/Stennis Space Center baseline HCFC-225 material that will no longer be available for purchase after 2014. MSFC/SSC applications in cleaning / sampling oxygen propulsion components, support equipment, and test system were reviewed then candidate replacement cleaners and test methods selected. All of these factors as well as testing results will be discussed.

  18. A cleaner two-step synthesis of high purity diallyldimethylammonium chloride monomers for flocculant preparation.

    PubMed

    Tian, Bing-hui; Fan, Bin; Peng, Xian-jia; Luan, Zhao-kun

    2005-01-01

    In order to improve the flocculation efficiency of polydiallyldimethylammonium chloride (PDADMAC), high molecular weight PDADMAC should be prepared from high purity diallyldimethylammonium chloride(DADMAC) monomers. In this paper, a cleaner method with microwave irradiation and alkali solidification was proposed for preparing high pure DADMAC by selective heating under low temperature, and the prepared high purity DADMAC is characterized using FTIR and atomic absorption spectrometry. The new method provides a solution to the key technical problem of PDADMAC synthesis. Comparing with the conventional methods, the results showed that the advantages of the novel synthesis include: (a) high purity DADMAC is improved from 57% to 71%; (b) reaction time of tertiary amine preparation is shortened from 6 h to 7 min; (c) water instead of acetone was used as reaction medium; (d) toxic by-products, wastewater and waste gas are eliminated. Flocculant made from the synthesized high purity DADMAC monomers was proved more efficient in flocculation tests. PMID:16313006

  19. Transitioning from traditional to green cleaners: an analysis of custodian and manager focus groups.

    PubMed

    Simcox, Nancy; Wakai, Sara; Welsh, Loyola; Westinghouse, Carol; Morse, Tim

    2012-01-01

    Custodians represent one of the largest occupational groups using cleaning agents, and yet their voices are infrequently heard in relation to the introduction of "green" cleaners and the laws regarding environmentally preferable products (EPP). This study reflects worker voices on use and effectiveness of chemicals, as well as incentives and obstacles for green cleaning programs. Sixty-four custodians and staff participated in 10 focus groups. Data were entered into Atlas Ti and the constant comparative method of qualitative data analysis was used to identify themes. Themes included satisfaction in a "well-done" job, more effort required for job, lack of involvement in EPP selection process, EPP's ease of use for workers with English as a Second Language (ESL), misuse of disinfectants, health complaints, and need for training. This study shows that custodians have a voice, and that improved communication and feedback among all the stakeholders are needed to make the transition to green cleaning more effective. PMID:23380255

  20. Enhanced colonization success and competition associated with conspecifics in cleaner fish Labroides dimidiatus juveniles

    NASA Astrophysics Data System (ADS)

    Grutter, A. S.

    2012-12-01

    The cleaner fish Labroides dimidiatus affects the abundance of many fishes, including their juveniles, yet how they affect the post-settlement processes of conspecifics remains poorly known. Using a long-term experiment, where L. dimidiatus were regularly removed from seven patch reefs (removals) for 10 years or left undisturbed (controls) on nine, the effect of conspecifics' presence on recently settled L. dimidiatus juveniles and the relationship between juvenile and adult abundance on control reefs were examined. Repeated sampling 4-40 months after manipulating L. dimidiatus revealed that the abundance of juveniles on removals, compared with controls reefs, was 72 % (95 % CI = 65-79 %) lower; this effect did not vary over time. Thus, decreased colonization was associated with resident conspecific absence and this effect was present after 4 months. Since other studies found 4 months of cleaner absence was too short to affect client abundance—a factor also known to enhance L. dimidiatus colonization—it was likely not involved here. Over 10 years, individual control reefs were almost always occupied by at least one adult (89-100 % of times sampled); but in summer, when L. dimidiatus colonization was highest, juvenile abundance was negatively related with adult abundance at one of two sites, with the expected number of juveniles decreasing by 67 % (95 % CI = 51-83 %) with each additional adult. This suggests a deleterious effect of adults on juveniles at one site, such as competition. Enhanced colonization of juveniles associated with adult presence may partly explain the relative permanence of fish cleaning stations.

  1. Ultraviolet-B wavelengths regulate changes in UV absorption of cleaner fish Labroides dimidiatus mucus.

    PubMed

    Zamzow, Jill P; Siebeck, Ulrike E; Eckes, Maxi J; Grutter, Alexandra S

    2013-01-01

    High-energy wavelengths in the ultraviolet-B (UVB, 280-315 nm) and the UVA (315-400-nm) portion of the spectrum are harmful to terrestrial and aquatic organisms. Interestingly, UVA is also involved in the repair of UV induced damage. Organisms living in shallow coral reef environments possess UV absorbing compounds, such as mycosporine-like amino acids, to protect them from UV radiation. While it has been demonstrated that exposure to UV (280-400 nm) affects the UV absorbance of fish mucus, whether the effects of UV exposure vary between UVB and UVA wavelengths is not known. Therefore, we investigated whether the UVB, UVA, or photosynthetically active radiation (PAR, 400-700 nm) portions of the spectrum affected the UV absorbance of epithelial mucus and Fulton's body condition index of the cleaner fish Labroides dimidiatus. We also compared field-measured UV absorbance with laboratory based high-performance liquid chromatography measurements of mycosporine-like amino acid concentrations. After 1 week, we found that the UV absorbance of epithelial mucus was higher in the UVB+UVA+PAR treatment compared with the UVA+PAR and PAR only treatments; after 2 and 3 weeks, however, differences between treatments were not detected. After 3 weeks, Fulton's body condition index was lower for fish in the UVB+UVA+PAR compared with PAR and UVA+PAR treatments; furthermore, all experimentally treated fish had a lower Fulton's body condition index than did freshly caught fish. Finally, we found a decrease with depth in the UV absorbance of mucus of wild-caught fish. This study suggests that the increase in UV absorbance of fish mucus in response to increased overall UV levels is a function of the UVB portion of the spectrum. This has important implications for the ability of cleaner fish and other fishes to adjust their mucus UV protection in response to variations in environmental UV exposure. PMID:24143264

  2. Urban air quality

    NASA Astrophysics Data System (ADS)

    Fenger, Jes

    Since 1950 the world population has more than doubled, and the global number of cars has increased by a factor of 10. In the same period the fraction of people living in urban areas has increased by a factor of 4. In year 2000 this will amount to nearly half of the world population. About 20 urban regions will each have populations above 10 million people. Seen over longer periods, pollution in major cities tends to increase during the built up phase, they pass through a maximum and are then again reduced, as abatement strategies are developed. In the industrialised western world urban air pollution is in some respects in the last stage with effectively reduced levels of sulphur dioxide and soot. In recent decades however, the increasing traffic has switched the attention to nitrogen oxides, organic compounds and small particles. In some cities photochemical air pollution is an important urban problem, but in the northern part of Europe it is a large-scale phenomenon, with ozone levels in urban streets being normally lower than in rural areas. Cities in Eastern Europe have been (and in many cases still are) heavily polluted. After the recent political upheaval, followed by a temporary recession and a subsequent introduction of new technologies, the situation appears to improve. However, the rising number of private cars is an emerging problem. In most developing countries the rapid urbanisation has so far resulted in uncontrolled growth and deteriorating environment. Air pollution levels are here still rising on many fronts. Apart from being sources of local air pollution, urban activities are significant contributors to transboundary pollution and to the rising global concentrations of greenhouse gasses. Attempts to solve urban problems by introducing cleaner, more energy-efficient technologies will generally have a beneficial impact on these large-scale problems. Attempts based on city planning with a spreading of the activities, on the other hand, may generate

  3. Medical devices; general and plastic surgery devices; classification of the low energy ultrasound wound cleaner. Final rule.

    PubMed

    2005-11-01

    The Food and Drug Administration (FDA) is classifying the low energy ultrasound wound cleaner into class II (special controls). The special control that will apply to the device is the guidance document entitled "Class II Special Controls Guidance Document: Low Energy Ultrasound Wound Cleaner." The agency is taking this action in response to a petition submitted under the Federal Food, Drug, and Cosmetic Act (the act) as amended by the Medical Device Amendments of 1976, the Safe Medical Devices Act of 1990, and the Food and Drug Administration Modernization Act of 1997 (FDAMA). The agency is classifying this device into class II (special controls) in order to provide a reasonable assurance of safety and effectiveness of the device. Elsewhere in this issue of the Federal Register, FDA is announcing the availability of the guidance document that will serve as the special control for the class II device. PMID:16273747

  4. Ocean cleaning stations under a changing climate: biological responses of tropical and temperate fish-cleaner shrimp to global warming.

    PubMed

    Rosa, Rui; Lopes, Ana Rita; Pimentel, Marta; Faleiro, Filipa; Baptista, Miguel; Trübenbach, Katja; Narciso, Luis; Dionísio, Gisela; Pegado, Maria Rita; Repolho, Tiago; Calado, Ricardo; Diniz, Mário

    2014-10-01

    Cleaning symbioses play an important role in the health of certain coastal marine communities. These interspecific associations often occur at specific sites (cleaning stations) where a cleaner organism (commonly a fish or shrimp) removes ectoparasites/damaged tissue from a 'client' (a larger cooperating fish). At present, the potential impact of climate change on the fitness of cleaner organisms remains unknown. This study investigated the physiological and biochemical responses of tropical (Lysmata amboinensis) and temperate (L. seticaudata) cleaner shrimp to global warming. Specifically, thermal limits (CTMax), metabolic rates, thermal sensitivity, heat shock response (HSR), lipid peroxidation [malondialdehyde (MDA) concentration], lactate levels, antioxidant (GST, SOD and catalase) and digestive enzyme activities (trypsin and alkaline phosphatase) at current and warming (+3 °C) temperature conditions. In contrast to the temperate species, CTMax values decreased significantly from current (24-27 °C) to warming temperature conditions (30 °C) for the tropical shrimp, where metabolic thermal sensitivity was affected and the HSR was significantly reduced. MDA levels in tropical shrimp increased dramatically, indicating extreme cellular lipid peroxidation, which was not observed in the temperate shrimp. Lactate levels, GST and SOD activities were significantly enhanced within the muscle tissue of the tropical species. Digestive enzyme activities in the hepatopancreas of both species were significantly decreased by warmer temperatures. Our data suggest that the tropical cleaner shrimp will be more vulnerable to global warming than the temperate Lysmata seticaudata; the latter evolved in a relatively unstable environment with seasonal thermal variations that may have conferred greater adaptive plasticity. Thus, tropical cleaning symbioses may be challenged at a greater degree by warming-related anthropogenic forcing, with potential cascading effects on the health

  5. Comparison of soft toothbrush and new ultra-soft cleaner in ability to remove plaque from teeth.

    PubMed

    Stewart, William J; Gratzel, Kristen; Gearity, Erin J; Akerman, Meredith; Hill, Jennifer M

    2014-11-01

    In this single-blind, crossover study, the difference between a brushless tooth cleaner and a soft toothbrush was studied to compare plaque removal efficiency. The sample was composed of 15 human subjects who were categorized into two groups. Group 1 was composed of subjects randomly assigned to the brushless tooth cleaner for the first two weeks. Group 2 was composed of those randomly assigned to begin the study using the soft toothbrush. After two weeks of brushing with their assigned device, subjects returned to their normal modality to brush their teeth for one week. For the last two weeks of the study, subjects were told to brush with the opposite device they were originally assigned to at the beginning of the trial. Investigators recorded the subjects' gingival indices (based on probe depths) and Quigley scores (based on plaque indices using disclosing solution) at the beginning of week one, the end of week two, the end of week three and the end of week five. The main outcomes in this study were the Silness Loe Index (SLI) and the Quigley Hein Index (QHI). The SLI was assessed on the buccal, lingual, mesial and distal surfaces of six teeth, for a total of 24 surfaces. The QHI was assessed on the buccal and lingual surfaces of six teeth, for a total of 12 surfaces. Each index was measured at each visit by the sum total score divided by the total number of surfaces. The data were analyzed separately using a mixed-effects repeated measures analysis of variance (RMANOVA) for crossover designs. Results indicate that, according to the SLI, there is no significant difference between the two treatments after the first or second weeks. However, based on the QHI, statistically significant differences existed between the two treatments after week one and two. After week one, the soft toothbrush use had a higher QHI than the brushless tooth cleaner. After week two, the brushless tooth cleaner had a higher QHI than the soft toothbrush. PMID:25675612

  6. Isokinetic air sampler

    DOEpatents

    Sehmel, George A.

    1979-01-01

    An isokinetic air sampler includes a filter, a holder for the filter, an air pump for drawing air through the filter at a fixed, predetermined rate, an inlet assembly for the sampler having an inlet opening therein of a size such that isokinetic air sampling is obtained at a particular wind speed, a closure for the inlet opening and means for simultaneously opening the closure and turning on the air pump when the wind speed is such that isokinetic air sampling is obtained. A system incorporating a plurality of such samplers provided with air pumps set to draw air through the filter at the same fixed, predetermined rate and having different inlet opening sizes for use at different wind speeds is included within the ambit of the present invention as is a method of sampling air to measure airborne concentrations of particulate pollutants as a function of wind speed.

  7. Sudden death involving inhalation of 1,1-difluoroethane (HFC-152a) with spray cleaner: three case reports.

    PubMed

    Sakai, Kentaro; Maruyama-Maebashi, Kyoko; Takatsu, Akihiro; Fukui, Kenji; Nagai, Tomonori; Aoyagi, Miwako; Ochiai, Eriko; Iwadate, Kimiharu

    2011-03-20

    Spray cleaner is a cleaning product containing compressed 1,1-difluoroethane (HFC-152a) to blow dust off electric devices and other sensitive equipment; however, it is also inhaled to induce euphoria. This report describes three cases of death involving HFC-152a inhalation with spray cleaner under different circumstances. In case 1, death was during inhalation for euphoria with which led to having frostbite. In case 2, death may have been associated with suicidal intention. Case 3 was also considered an accidental autoerotic death. In all three cases, HFC-152a was detected at 99.2-136.2mg/l in blood samples, 94.5-191.9 mg/l in urine samples and 3.6-18.4 mg in the gastric contents according to gas chromatography with flame ionization detection. To prevent death associated with HFC-152a inhalation from spray cleaner, the danger of the sudden death should be announced to people, given the ready availability of commercial products containing HFC-152a. PMID:20875935

  8. Multivariate Modeling of Proteins Related to Trapezius Myalgia, a Comparative Study of Female Cleaners with or without Pain

    PubMed Central

    Hadrevi, Jenny; Ghafouri, Bijar; Larsson, Britt; Gerdle, Björn; Hellström, Fredrik

    2013-01-01

    The prevalence of chronic trapezius myalgia is high in women with high exposure to awkward working positions, repetitive movements and movements with high precision demands. The mechanisms behind chronic trapezius myalgia are not fully understood. The purpose of this study was to explore the differences in protein content between healthy and myalgic trapezius muscle using proteomics. Muscle biopsies from 12 female cleaners with work-related trapezius myalgia and 12 pain free female cleaners were obtained from the descending part of the trapezius. Proteins were separated with two-dimensional differential gel electrophoresis (2D-DIGE) and selected proteins were identified with mass spectrometry. In order to discriminate the two groups, quantified proteins were fitted to a multivariate analysis: partial least square discriminate analysis. The model separated 28 unique proteins which were related to glycolysis, the tricaboxylic acid cycle, to the contractile apparatus, the cytoskeleton and to acute response proteins. The results suggest altered metabolism, a higher abundance of proteins related to inflammation in myalgic cleaners compared to healthy, and a possible alteration of the contractile apparatus. This explorative proteomic screening of proteins related to chronic pain in the trapezius muscle provides new important aspects of the pathophysiology behind chronic trapezius myalgia. PMID:24023854

  9. Aeromonas salmonicida infection levels in pre- and post-stocked cleaner fish assessed by culture and an amended qPCR assay.

    PubMed

    Gulla, S; Duodu, S; Nilsen, A; Fossen, I; Colquhoun, D J

    2016-07-01

    Due to increasing resistance to chemical therapeutants, the use of 'cleaner fish' (primarily wrasse, Labridae, species) has become popular in European salmon farming for biocontrol of the salmon louse, Lepeophtheirus salmonis (Krøyer). While being efficient de-licers, cleaner fish mortality levels in salmon cages are commonly high, and systemic bacterial infections constitute a major problem. Atypical furunculosis, caused by Aeromonas salmonicida A-layer types V and VI, is among the most common diagnoses reached in clinical investigations. A previously described real-time PCR (qPCR), targeting the A. salmonicida A-layer gene (vapA), was modified and validated for specific and sensitive detection of all presently recognized A-layer types of this bacterium. Before stocking and during episodes of increased mortality in salmon cages, cleaner fish (primarily wild-caught wrasse) were sampled and screened for A. salmonicida by qPCR and culture. Culture indicated that systemic bacterial infections are mainly contracted after salmon farm stocking, and qPCR revealed A. salmonicida prevalences of approximately 4% and 68% in pre- and post-stocked cleaner fish, respectively. This underpins A. salmonicida's relevance as a contributing factor to cleaner fish mortality and emphasizes the need for implementation of preventive measures (e.g. vaccination) if current levels of cleaner fish use are to be continued or expanded. PMID:26514414

  10. An in vitro study into the effect of a limited range of denture cleaners on surface roughness and removal of Candida albicans from conventional heat-cured acrylic resin denture base material.

    PubMed

    Harrison, Z; Johnson, A; Douglas, C W I

    2004-05-01

    This study evaluated the abrasiveness of four denture cleaners on the surface of denture base material and assessed their ability to remove Candida albicans. Acrylic resin discs 20 mm diameter and 2 mm thick were identically produced and polished. Four cleaners were evaluated: conventional toothpaste; toothpaste with stain remover; denture cleaning paste and an immersion type cleaner, and water were used as control. These were used at dilutions of 1:1, 1:2 and 1:3 with water. An electric toothbrush was used, and the discs cleaned to simulate 1 years' cleaning. The surface roughness of the discs were then measured, before and after cleaning, using a stylus profilometer, then inoculated with 1.2 x 10(6)C. albicans cells. The effectiveness of the denture cleaners to remove C. albicans cells was assessed following a single cleaning event. The immersion cleaner was significantly less abrasive than paste cleaners (P < 0.05). There were no significant differences between any dilutions for any cleaner used (P > 0.05). Immersion and paste cleaners removed almost all recoverable C. albicans from the discs, as cleaning with water alone was less effective (P < 0.05). An immersion type cleaner was found to be the most suitable cleaner because of its low abrasivity and effective removal of organic debris. PMID:15140172

  11. Air cleaning system

    SciTech Connect

    Tidwell, J.H.

    1987-06-16

    This patent describes an air cleaning system comprising: a motor housing; a motor mounted within the housing; a fan attached to and rotatably driven by the motor; a fan chamber surrounding the fan and having an air inlet and outlet; a separator housing means mounted adjacent to and in spaced relation with the motor housing, the separator housing means having an inlet disposed in communication with a chamber within separator housing means; an outlet disposed in communication with the fan chamber; an air driven separator means mounted in chamber of the separator housing means to receive airflow from inlet for rotation of the separator means and removal of foreign matter from airflow by centrifugal force responsive to rotation of the separator means; the airflow is further directed through the outlet of separator housing means to the fan chamber to be ejected by the fan.

  12. Studies in the developments of fly ash bricks -- an approach for cleaner environment. Part 2

    SciTech Connect

    Dube, S.K.; Palit, A.

    1995-09-01

    This work is on the coal ash of National Thermal Power Corporation (NTPC)-Ramagundam super thermal power station (installed capacity 2,100 MW) located in the southern part of India, where many parameters of coal, fly ash and bottom ash, in addition to the many operating parameters are different from earlier at the power station. It was mentioned before that fly ash generated from all coal based thermal power stations has been a nuisance for environment. One of the many avenues for achieving a cleaner environment is the utilization of ash for manufacture of bricks. Thus fly ash and pond ash or lagoon ash, were characterized for their chemical and physical properties. The results of fly ash and pond ash for LOI have been found as 0.45% and 5.57%, the lime content as 4.83% and 4.06%; and lime reactivity 64 and 20 Kg/Cm{sup 2} respectively. Obviously, these characteristics have an important role to play. A brief review of the process technology developed for the manufacture of fly ash bricks is also covered.

  13. Implementing the Montreal Protocol in China: Use of cleaner technology in two industrial sectors

    SciTech Connect

    Zhao, J.; Ortolano, L.

    1999-09-01

    An analysis of the household refrigeration sector and the foams sector investigates how Chinese enterprises have adopted cleaner technologies involving substitutes for ozone depleting substances (ODSs), such as chlorofluorocarbons (CFCs). The performance of the household refrigeration sector in reducing ODS consumption has been superior to that of the foams sector, even though required technology changes are relatively simple for the foams sector. There are two expansions for this outcome. First, market demand matters. The influence of the global market, multinational corporations, intense (and occasionally misleading) advertising about non-CFC products, and severe competition for consumers caused China`s principal refrigerator manufacturers to adopt non-CFC production technologies. Similar incentives did not exist for enterprises in the foams sector. Second, industrial structure matters. The foams sector includes a large number of small enterprises with limited financial and technical capability and weak access to information and technology, and these factors obstructed technological change. In general, assistance from the Multilateral fund established under the Montreal Protocol has motivated enterprises to shift to ODS reduction technologies, but complex and lengthy procedures for accessing the Multilateral Fund, difficulties in finding appropriate suppliers of non-CFC technologies, and insufficient financial an technical capabilities of many enterprises have slowed down this shift. The results provide a foundation for making changes in international assistance programs and China`s strategies for CFC reduction.

  14. Severe lactic acidosis in a diabetic patient after ethanol abuse and floor cleaner intake.

    PubMed

    Hendrikx, Jeroen J M A; Lagas, Jurjen S; Daling, Ratana; Hooijberg, Jan Hendrik; Schellens, Jan H M; Beijnen, Jos H; Brandjes, Desiderius P M; Huitema, Alwin D R

    2014-11-01

    An intoxication with drugs, ethanol or cleaning solvents may cause a complex clinical scenario if multiple agents have been ingested simultaneously. The situation can become even more complex in patients with (multiple) co-morbidities. A 59-year-old man with type 2 diabetes mellitus (without treatment two weeks before the intoxication) intentionally ingested a substantial amount of ethanol along with ~750 mL of laminate floor cleaner containing citric acid. The patient was admitted with severe metabolic acidosis (both ketoacidosis and lactic acidosis, with serum lactate levels of 22 mM). He was treated with sodium bicarbonate, insulin and thiamine after which he recovered within two days. Diabetic ketoacidosis and lactic acidosis aggravated due to ethanol intoxication, thiamine deficiency and citrate. The high lactate levels were explained by excessive lactate formation caused by the combination of untreated diabetes mellitus, thiamine deficiency and ethanol abuse. Metabolic acidosis in diabetes is multi-factorial, and the clinical situation may be further complicated, when ingestion of ethanol and toxic agents are involved. Here, we reported a patient in whom diabetic ketoacidosis was accompanied by severe lactic acidosis as a result of citric acid and mainly ethanol ingestion and a possible thiamine deficiency. In the presence of lactic acidosis in diabetic ketoacidosis, physicians need to consider thiamine deficiency and ingestion of ethanol or other toxins. PMID:24717115

  15. Effects of three Caribbean cleaner shrimps on ectoparasitic monogeneans in a semi-natural environment

    NASA Astrophysics Data System (ADS)

    McCammon, A.; Sikkel, P. C.; Nemeth, D.

    2010-06-01

    Most research on cleaning symbioses on coral reefs has focused on fish clients being cleaned by smaller fishes. While many shrimps and other crustaceans are reported as cleaners, whether they remove parasites from fish hosts and can effectively regulate populations of ectoparasites is unclear. The effects of Pederson shrimp ( Periclimenes pedersoni) , spotted shrimp ( P. yucatanicus), and banded coral shrimp ( Stenopus hispidus), on the parasitic monogenean Neobenedenia melleni on a host reef fish, blue tang ( Acanthurus coeruleus), were investigated. The abundance and size of N. melleni from fish with and without access to shrimps in a semi-natural macrocosm was quantified. P. pedersoni had a strong effect on both the abundance and size of parasites. In contrast, P. yucatanicus and S. hispidus had no effect on the abundance of parasites but had a small yet statistically significant effect on average size. These data suggest that P. pedersoni can play a significant role in the biological regulation of at least some ectoparasites on Caribbean reef fishes, but further suggest that some other shrimps regarded as “cleaners” may have little or no effectiveness at removing parasites and underscore the need for further verification before this term is applied.

  16. High levels of polybrominated diphenyl ethers in vacuum cleaner dust from California fire stations.

    PubMed

    Shen, Beverly; Whitehead, Todd P; McNeel, Sandra; Brown, F Reber; Dhaliwal, Joginder; Das, Rupali; Israel, Leslie; Park, June-Soo; Petreas, Myrto

    2015-04-21

    Firefighters are exposed to chemicals during fire events and may also experience chemical exposure in their fire stations. Dust samples from used vacuum cleaner bags were collected from 20 fire stations in California and analyzed for polybrominated diphenyl ethers (PBDEs), polycyclic aromatic hydrocarbons (PAHs), and polychlorinated biphenyls (PCBs) using gas chromatography-mass spectrometry. Median dust concentrations were higher for PBDEs (e.g., 47 000 ng/g for BDE-209) than for PAHs (e.g., 220 ng/g for benzo[a]pyrene) or PCBs (e.g., 9.3 ng/g for PCB-180). BDE-209 concentrations in dust from California fire stations were among the highest of any previously documented homes or occupational settings in the world. We examined factors such as the frequency of emergency responses, the number of fire vehicles on site, and building age, but we could not account for the high levels of BDE-209 observed in fire station dust. Based on the findings of our pilot study, we hypothesize that possible sources of BDE-209 in fire stations include contaminated ash tracked back from fire events via boots, clothing, and other equipment as well as specialized equipment treated with BDE-209, including turnout gear and fire vehicles. We suggest possible follow-up studies to confirm these hypotheses. PMID:25798547

  17. Cleaner production and methodological proposal of eco-efficiency measurement in a Mexican petrochemical complex.

    PubMed

    Morales, M A; Herrero, V M; Martínez, S A; Rodríguez, M G; Valdivieso, E; Garcia, G; de los Angeles Elías, Maria

    2006-01-01

    Abstract In the frame of the Petróleos Mexicanos Institutional Program for Sustainable Development, processes were evaluated in the manufacture operation of the petrochemical industry, with the purpose of reducing their ecological fingerprint. Thirteen cleaner production opportunities were registered in six process plants: ethylene oxide and glycols, acetaldehyde, ethylene, high density polyethylene, polypropylene switch and acrylonitrile, and 45 recommendations in the waste water treatment plant. Morelos is the second most important petrochemical complex in the Mexican and Latin American petrochemical industry. A tool was developed to obtain eco-efficiency indicators in operation processes, and as a result, potential savings were obtained based on best performance, as well as the integrated distribution of Sankey diagrams. Likewise, a mechanism of calculation to obtain economic savings based on the reduction of residues during the whole productive process is proposed. These improvement opportunities and recommendations will result in economic and environmental benefits minimising the use of water, efficient use of energy, raw materials and reducing residues from source, generating less environmental impacts during the process. PMID:16862769

  18. Water gun vs air gun: A comparison

    USGS Publications Warehouse

    Hutchinson, D.R.; Detrick, R. S.

    1984-01-01

    The water gun is a relatively new marine seismic sound source that produces an acoustic signal by an implosive rather than explosive mechanism. A comparison of the source characteristics of two different-sized water guns with those of conventional air guns shows the the water gun signature is cleaner and much shorter than that of a comparable-sized air gun: about 60-100 milliseconds (ms) for an 80-in3. (1.31-liter (I)) water gun compared with several hundred ms for an 80-in3. (1.31-1) air gun. The source spectra of water guns are richer in high frequencies (>200 Hz) than are those of air guns, but they also have less energy than those of air guns at low frequencies. A comparison between water gun and air gun reflection profiles in both shallow (Long Island Sound)-and deep (western Bermuda Rise)-water settings suggests that the water gun offers a good compromise between very high resolution, limited penetration systems (e.g. 3.5-kHz profilers and sparkers) and the large volume air guns and tuned air gun arrays generally used where significant penetration is required. ?? 1984 D. Reidel Publishing Company.

  19. Enhanced animal productivity and health with improved manure management in 2nd Generation Environmentally Superior Technology in North Carolina: II. Air quality

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The aim of this study was to evaluate the effects of improved manure management on air quality and the beneficial effect of a cleaner environment on animal productivity and health using a second generation of Environmentally Superior Technology. The second generation system combines solid-liquid sep...

  20. A Modelling Framework for Assessing the Risk of Emerging Diseases Associated with the Use of Cleaner Fish to Control Parasitic Sea Lice on Salmon Farms.

    PubMed

    Murray, A G

    2016-04-01

    Sea lice are the most damaging parasite of marine salmonids, both economically and in terms of potential impacts on wild fish. An increasingly widely applied control is the use of cleaner fish (CF) such as wrasse that eat lice. However, such CF can carry pathogens that may cause disease in salmon, including the potential emergence of new diseases. This is not just a theoretical risk, as demonstrated by a recent outbreak of viral haemorrhagic septicaemia in wrasse held on salmon farms in Shetland. A modelling framework is developed to identify conditions in which emergence might occur, and, from this, means of reducing risk. Diseases that might emerge easily in farmed salmon would be likely to have already done so by other routes of exposure, and if risks are very low, they would need to be greatly enhanced to become significant relative to costs of lice control. CF may most enhance risks from disease with moderate probability of emerging. Risks of emergence can be reduced by replacing wild-caught with hatchery-reared CF, minimizing mixing of CF from different sources, surveillance for clinical disease in the CF and ensuring strategic biosecurity (area management with synchronized fallowing). Reuse of CF for a second salmon production cycle may reduce costs and even probability of infection (especially from wild-caught CF), but should only be considered as part of a rigorous area management programme because the practice presents opportunities for pathogens to adapt to salmon by weakening fallowing. PMID:25208602

  1. Improving the analysis of small precipitates in HSLA steels using a plasma cleaner and ELNES.

    PubMed

    Wilson, J A; Craven, A J

    2003-04-01

    The change from producing high strength low alloy (HSLA) steel sheet by conventional thick slab casting to producing it by direct charged thin slab casting causes a major change in the evolution of the precipitation. A key area of interest is the composition of the sub-10nm precipitates used to produce dispersion hardening. Carbon extraction replicas are frequently used to study precipitates in steels and other metals. When used with annular dark field imaging, this technique gives high contrast images of the precipitates while the thin carbon film adds little background or additional characteristic signals to either electron energy loss spectra or energy dispersive X-ray spectra. The method has the additional major advantage of removing the ferromagnetic matrix when studying HSLA steels. However, when the precipitates contain carbon, the C K-edge is dominated by the contribution from the amorphous carbon film. A plasma cleaner can be used to thin this carbon film to approximately 0.5 nm or less and then the contribution from the carbon in the precipitate can be separated from that in the carbon film using the electron energy loss near edge structure. A similar approach can be taken to separate the oxygen content of the precipitate from that of oxides formed from low-level impurities in the amorphous carbon during the plasma thinning process. In most cases, the precipitate studied here contained little or no oxygen even for the smallest sizes examined (approximately 4 nm). The precipitates contain mainly nitrogen with little carbon. For some compositions, the precipitates are clearly sub-stoichiometric. PMID:12524190

  2. Efficacy of surface disinfectant cleaners against emerging highly resistant gram-negative bacteria

    PubMed Central

    2014-01-01

    Background Worldwide, the emergence of multidrug-resistant gram-negative bacteria is a clinical problem. Surface disinfectant cleaners (SDCs) that are effective against these bacteria are needed for use in high risk areas around patients and on multi-touch surfaces. We determined the efficacy of several SDCs against clinically relevant bacterial species with and without common types of multidrug resistance. Methods Bacteria species used were ATCC strains; clinical isolates classified as antibiotic-susceptible; and multi-resistant clinical isolates from Klebsiella oxytoca, Klebsiella pneumoniae, and Serratia marcescens (all OXA-48 and KPC-2); Acinetobacter baumannii (OXA-23); Pseudomonas aeruginosa (VIM-1); and Achromobacter xylosoxidans (ATCC strain). Experiments were carried out according to EN 13727:2012 in quadruplicate under dirty conditions. The five evaluated SDCs were based on alcohol and an amphoteric substance (AAS), an oxygen-releaser (OR), surface-active substances (SAS), or surface-active-substances plus aldehydes (SASA; two formulations). Bactericidal concentrations of SDCs were determined at two different contact times. Efficacy was defined as a log10 ≥ 5 reduction in bacterial cell count. Results SDCs based on AAS, OR, and SAS were effective against all six species irrespective of the degree of multi-resistance. The SASA formulations were effective against the bacteria irrespective of degree of multi-resistance except for one of the four P. aeruginosa isolates (VIM-1). We found no general correlation between SDC efficacy and degree of antibiotic resistance. Conclusions SDCs were generally effective against gram-negative bacteria with and without multidrug resistance. SDCs are therefore suitable for surface disinfection in the immediate proximity of patients. Single bacterial isolates, however, might have reduced susceptibility to selected biocidal agents. PMID:24885029

  3. Industrial water demand management and cleaner production potential: a case of three industries in Bulawayo, Zimbabwe

    NASA Astrophysics Data System (ADS)

    Gumbo, Bekithemba; Mlilo, Sipho; Broome, Jeff; Lumbroso, Darren

    The combination of water demand management and cleaner production concepts have resulted in both economical and ecological benefits. The biggest challenge for developing countries is how to retrofit the industrial processes, which at times are based on obsolete technology, within financial, institutional and legal constraints. Processes in closed circuits can reduce water intake substantially and minimise resource input and the subsequent waste thereby reducing pollution of finite fresh water resources. Three industries were studied in Bulawayo, Zimbabwe to identify potential opportunities for reducing water intake and material usage and minimising waste. The industries comprised of a wire galvanising company, soft drink manufacturing and sugar refining industry. The results show that the wire galvanising industry could save up to 17% of water by recycling hot quench water through a cooling system. The industry can eliminate by substitution the use of toxic materials, namely lead and ammonium chloride and reduce the use of hydrochloric acid by half through using an induction heating chamber instead of lead during the annealing step. For the soft drink manufacturing industry water intake could be reduced by 5% through recycling filter-backwash water via the water treatment plant. Use of the pig system could save approximately 12 m 3/month of syrup and help reduce trade effluent fees by Z30/m 3 of “soft drink”. Use of a heat exchanger system in the sugar refining industry can reduce water intake by approximately 57 m 3/100 t “raw sugar” effluent volume by about 28 m 3/100 t “raw sugar”. The water charges would effectively be reduced by 52% and trade effluent fees by Z3384/100 t “raw sugar” (57%). Proper equipment selection, equipment modification and good house-keeping procedures could further help industries reduce water intake and minimise waste.

  4. Air Pollution

    MedlinePlus

    Air pollution is a mixture of solid particles and gases in the air. Car emissions, chemicals from factories, dust, ... a gas, is a major part of air pollution in cities. When ozone forms air pollution, it's ...

  5. Air Pollution

    MedlinePlus

    Air pollution is a mixture of solid particles and gases in the air. Car emissions, chemicals from factories, ... Ozone, a gas, is a major part of air pollution in cities. When ozone forms air pollution, it's ...

  6. Characterization of biogenic volatile organic compounds (BVOCs) in cleaning reagents and air fresheners in Hong Kong

    NASA Astrophysics Data System (ADS)

    Huang, Yu; Ho, Steven Sai Hang; Ho, Kin Fai; Lee, Shun Cheng; Gao, Yuan; Cheng, Yan; Chan, C. S.

    2011-11-01

    Biogenic volatile organic compounds (BVOCs) emitted from cleaning products and air fresheners indoors are prone to oxidation resulting in the formation of secondary pollutants that can pose health risks on residents. In this study, a solid phase microextraction (SPME) coupled with gas chromatography/mass spectrometry (SPME-GC/MS) method was applied for the determination of BVOCs compositions in three categories of cleaning products including floor cleaners (FC), kitchen cleaners (KC) and dishwashing detergents (DD), and also air fresheners (AF). The analysis results demonstrated that chemical composition and concentration of individual BVOC varied broadly with household products in the view of their different functions and scents as indicated on the labels. The concentration of total BVOCs for sample FC1 was the highest up to 4146.0 μg g -1, followed by FC2 of 264.6 μg g -1, FC4 of 249.3 μg g -1 and FC3 of 139.2 μg g -1. D-limonene was the most abundant detected BVOCs in KC samples with the chemical composition varying from 19.6 ± 1.0 to 1513.0 ± 37.1 μg g -1. For dishwashing detergents, only D-limonene was detected and quantified. The BVOCs compositions of air freshener samples are much more complicated. It was estimated that the consumption of floor cleaners contributed 51% of the total BVOCs amount indoors in Hong Kong, followed by air fresheners 42%, kitchen cleaners 5% and dishwashing detergents 2%.

  7. REMOVAL OF ALDEHYDES FROM INDOOR AIR: ELUCIDATING ADSORPTION MECHANISMS, MODELING COMPETITIVE ADSORPTION, AND PREDICTING REMOVAL IN GAS-PHASE AIR CLEANERS

    EPA Science Inventory

    This research project will identify specific chemical and physical characteristics of activated carbon surfaces that promote the removal of gas-phase, polar organic pollutants. It is expected that basic and acidic functional groups will influence aldehyde adsorption through di...

  8. A resolution recognizing past, present, and future public health and economic benefits of cleaner air due to the successful implementation of the Clean Air Act.

    THOMAS, 112th Congress

    Sen. Sanders, Bernard [I-VT

    2011-03-31

    03/31/2011 Referred to the Committee on Environment and Public Works. (text of measure as introduced: CR S2052-2053) (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

  9. The effect of various frequencies of ultrasonic cleaner in reducing residual monomer in acrylic resin.

    PubMed

    Charasseangpaisarn, Taksid; Wiwatwarrapan, Chairat

    2015-12-01

    Monomer remaining in denture base acrylic can be a major problem because it may cause adverse effects on oral tissue and on the properties of the material. The purpose of this study was to compare the effect of various ultrasonic cleaner frequencies on the amount of residual monomer in acrylic resin after curing. Forty-two specimens each of Meliodent heat-polymerized acrylic resin (M) and Unifast Trad Ivory auto-polymerized acrylic resin (U) were prepared according to their manufacturer's instructions and randomly divided into seven groups: Negative control (NC); Positive control (PC); and five ultrasonic treatment groups: 28 kHz (F1), 40 kHz (F2), 60 kHz (F3) (M=10 min, U=5 min), and 28 kHz followed by 60 kHz (F4: M=5 min per frequency, U=2.5 min per frequency, and F5: M=10 min followed by 5 min per frequency, U=5 min followed by 2.5 min per frequency). Residual monomer was determined by HPLC following ISO 20795-1. The data were analyzed by One-way ANOVA and Tukey HSD. There was significantly less residual monomer in the auto-polymerized acrylic resin in all ultrasonic treatment groups and the PC group than that of the NC group (p<0.05). However, the amount of residual monomer in group F3 was significantly higher than that of the F1, F4, and PC groups (p<0.05). In contrast, ultrasonic treatment did not reduce the amount of residual monomer in heat-polymerized acrylic resin (p>0.05). The amount of residual monomer in heat-polymerized acrylic resin was significantly lower than that of auto-polymerized acrylic resin. In conclusion, ultrasonic treatment at low frequencies is recommended to reduce the residual monomer in auto-polymerized acrylic resin and this method is more practical in a clinical situation than previously recommended methods because of reduced chairside time. PMID:26190059

  10. 'Part of the job': male-to-male sexual experiences and abuse of young men working as 'truck cleaners' along the highways of Pakistan.

    PubMed

    de Lind van Wijngaarden, Jan Willem; Schunter, Bettina T

    2014-01-01

    As part of a study on the sexual health and social protection needs of men who have sex with men in Pakistan, 11 young men employed as assistants to truckers ('truck cleaners') who acknowledged having had sexual experiences with men, were interviewed and their social background and sexual initiation and their subsequent sexual lives were explored. For most truck cleaners, the first instance of sexual contact between the truck cleaner and the driver was forced and happened at an early age. Sex with other men, as well as with women (including sex workers) was widely reported. Drug and alcohol use was common. There is strong potential for HIV and STIs to spread through these sexual networks. Measures to prevent young men from entering into a career as truck helpers should be considered, as well as interventions to improve the health and social situation of those already employed. PMID:24666177

  11. Lipophilic super-absorbent polymer gels as surface cleaners for oil and grease

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Increasingly stringent environmental regulations on volatile organic compounds (VOCs) and hazardous air pollutants (HAPs) demand the development of disruptive technologies for cleaning weapons systems and platforms. Currently employed techniques such as vapor degreasing, solvent, aqueous, or blast ...

  12. Lipophilic super-absorbent swelling gels as cleaners for use on weapons systems and platforms

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Increasingly stringent environmental regulations on volatile organic compounds (VOCs) and hazardous air pollutants (HAPs) demand the development of disruptive technologies for cleaning weapons systems and platforms. Currently employed techniques such as vapor degreasing, solvent, aqueous, or blast c...

  13. Vehicle stabilizing means

    SciTech Connect

    Dornier, C.M.

    1986-12-16

    An air foil assembly is described for use with a racing vehicle positioned and attached to the rear of the racing vehicle by a support structure, comprising: (a) a flap pivotable from a horizontal plane by a positioning assembly, the flap extending between parallel vertical panels and a stop means protruding from at least one of the panels at a pre-determined position above the flap; and (b) a hydraulic cylinder assembly having a hydraulic cylinder fixedly attached to the support structure and operatively connected to the vehicle braking system to provide hydraulic pressure to the hydraulic cylinder. The hydraulic cylinder has its piston rod pivotally attached to a linking assembly connected to the support structure and operatively contacting the flap to cause the flap to pivot upward or downward upon movement of the piston rod.

  14. A design of experiments test to define critical spray cleaning parameters for Brulin 815 GD and Jettacin cleaners

    NASA Technical Reports Server (NTRS)

    Keen, Jill M.; Evans, Kurt B.; Schiffman, Robert L.; Deweese, C. Darrell; Prince, Michael E.

    1995-01-01

    Experimental design testing was conducted to identify critical parameters of an aqueous spray process intended for cleaning solid rocket motor metal components (steel and aluminum). A two-level, six-parameter, fractional factorial matrix was constructed and conducted for two cleaners, Brulin 815 GD and Diversey Jettacin. The matrix parameters included cleaner temperature and concentration, wash density, wash pressure, rinse pressure, and dishwasher type. Other spray parameters: nozzle stand-off, rinse water temperature, wash and rinse time, dry conditions, and type of rinse water (deionized) were held constant. Matrix response testing utilized discriminating bond specimens (fracture energy and tensile adhesion strength) which represent critical production bond lines. Overall, Jettacin spray cleaning was insensitive to the range of conditions tested for all parameters and exhibited bond strengths significantly above the TCA test baseline for all bond lines tested. Brulin 815 was sensitive to cleaning temperature, but produced bond strengths above the TCA test baseline even at the lower temperatures. Ultimately, the experimental design database was utilized to recommend process parameter settings for future aqueous spray cleaning characterization work.

  15. Sugar and spice and everything nice: health effects of the sexual division of labor among train cleaners.

    PubMed

    Messing, K; Doniol-Shaw, G; Haëntjens, C

    1993-01-01

    Attempts have been made to justify the sexual division of labor by referring to women's relative physical weakness, lack of technical competence, and dislike for dirty work. An analysis of the work activity of train cleaners in France showed a rigid sexual division of labor, in which the task of toilet cleaning was exclusively assigned to women. Interviews and observations revealed a number of physical constraints associated with the work, and particularly with toilet cleaning. Women employees suffered from many musculoskeletal problems and were frequently absent from work. Toilet cleaning involved traveling distances of over 20 kilometers per day and maintaining uncomfortable postures. Twenty-five percent of time during the actual cleaning was spent in a crouched position. The work was complex, involving a number of choices and decisions, as well as requiring a variety of techniques adapted to the differences in the nature and location of soil. This "women's job" was dirty and physically demanding, and required technical skill. Among train cleaners, the inability to rotate jobs due to sex-typed job assignment may be associated with specific health and safety risks for both sexes. PMID:8425782

  16. The Economic Value of Air Quality Forecasting

    NASA Astrophysics Data System (ADS)

    Anderson-Sumo, Tasha

    Both long-term and daily air quality forecasts provide an essential component to human health and impact costs. According the American Lung Association, the estimated current annual cost of air pollution related illness in the United States, adjusted for inflation (3% per year), is approximately $152 billion. Many of the risks such as hospital visits and morality are associated with poor air quality days (where the Air Quality Index is greater than 100). Groups such as sensitive groups become more susceptible to the resulting conditions and more accurate forecasts would help to take more appropriate precautions. This research focuses on evaluating the utility of air quality forecasting in terms of its potential impacts by building on air quality forecasting and economical metrics. Our analysis includes data collected during the summertime ozone seasons between 2010 and 2012 from air quality models for the Washington, DC/Baltimore, MD region. The metrics that are relevant to our analysis include: (1) The number of times that a high ozone or particulate matter (PM) episode is correctly forecasted, (2) the number of times that high ozone or PM episode is forecasted when it does not occur and (3) the number of times when the air quality forecast predicts a cleaner air episode when the air was observed to have high ozone or PM. Our collection of data included available air quality model forecasts of ozone and particulate matter data from the U.S. Environmental Protection Agency (EPA)'s AIRNOW as well as observational data of ozone and particulate matter from Clean Air Partners. We evaluated the performance of the air quality forecasts with that of the observational data and found that the forecast models perform well for the Baltimore/Washington region and the time interval observed. We estimate the potential amount for the Baltimore/Washington region accrues to a savings of up to 5,905 lives and 5.9 billion dollars per year. This total assumes perfect compliance with

  17. Air Abrasion

    MedlinePlus

    ... delivered directly to your desktop! more... What Is Air Abrasion? Article Chapters What Is Air Abrasion? What Happens? The Pros and Cons Will I Feel Anything? Is Air Abrasion for Everyone? print full article print this ...

  18. Ocean Environmental Assessment and Adaptive Resource Management within the Framework of IOOS and CLEANER

    NASA Astrophysics Data System (ADS)

    Bonner, J.; Brezonik, P.; Clesceri, N.; Gouldman, C.; Jamail, R.; Zilkoski, D.

    2006-12-01

    The Integrated Ocean Observing System (IOOS), established through the efforts of the National Office for Integrated and Sustained Ocean Observations (Oceans.US) provides quality controlled data and information on a routine and continuous basis regarding current and future states of the oceans and Great Lakes at scales from global ocean basins to coastal ecosystems. The seven societal goals of IOOS are outlined in this paper. The Engineering and Geosciences Directorates at the National Science Foundation (NSF) are collaborating in planning the WATERS (WATer Environmental Research System) Network, an outgrowth of earlier, separate initiatives of the two directorates: CLEANER (Collaborative Large-scale Engineering Analysis Network for Environmental Research) and Hydrologic Observatories. WATERS Network is being developed by engineers and scientists in the academic community who recognize the need for an observation and research network to enable better understanding of human-dominated water-environments, their stressors, and the links between them. The WATERS Network model is based on a research framework anchored in a distributed, cyber-based network supporting: 1) data collection; 2) data aggregation; 3) analytical and exploratory tools; and 4) a computational environment supporting predictive modeling and policy analysis on water resource systems. Within IOOS, the U.S. coastal margin is divided into Regional Associations (RAs), organizational units that are conceptually linked through planned data collection and analysis activities for resolving fundamental coastal margin ecosystem questions and addressing RA concerns. Under the WATERS Network scheme, a Coastal Margin Regional Environmental System (RES) for coastal areas would be defined conceptually based on geomorphologic considerations of four major water bodies; Atlantic and Pacific Oceans, Gulf of Mexico, and Laurentian Great Lakes. Within this framework, each coastal margin would operate one or more local

  19. MEANS User Documentation. Appendix A

    NASA Technical Reports Server (NTRS)

    Melconian, Terran

    2004-01-01

    MEANS is an acronym for the MIT Extensible Air Network Simulation. MIT is the Massachusetts Institute of Technology, where MEANS was developed. MEANS models the flow of aircraft in a simulation of the US National Airspace System. It can optionally follow the flow of passengers as well. The flight model takes the form of several queues through which the aircraft pass, as well as delays at certain times; the passengers can be transported via flights. MEANS is an event-based model. This means that events are scheduled at some point in the future, and once an event has executed, the simulation t h e advances to that of the next event. This is a different approach than some simulations (particularly those of physical systems), where time is advanced in fixed increments and the state of the system is updated at each step.This documentation is a "user guide" for MEANS - it describes how to USE means, not write new modules. For programming instructions, see the programming documentation, available as a separate document.This document assumse no programming knowledge. It will describe how to run MEANS, understand the data formats, and use such utility programs as already exist. For more detailed information on the internal workings of MEANS, and how to programmatically add to it, refer to the programming documentation.

  20. Ambient air and its potential effects on conception in vitro.

    PubMed

    Cohen, J; Gilligan, A; Esposito, W; Schimmel, T; Dale, B

    1997-08-01

    Incidences of chemical air contamination (CAC) are common in assisted reproductive technology, but not reported in peer review format. Justified fear of car and industrial emissions clearly exists among reproductive specialists, but standards for air contents and gaseous emission limits have not been reported. Here, we describe air sampling methods and assay systems which can be applied to any laboratory or laboratory item. It was found that unfiltered outside air may be cleaner than high efficiency particulate air filtration (HEPA) filtered laboratory air or air obtained from incubators, due to accumulation of volatile organic compounds derived from adjacent spaces or specific laboratory products such as compressed CO2, sterile Petri dishes and other materials or devices known to release gaseous emissions. Specific groups of products such as anaesthetic gases, refrigerants, cleaning agents, hydrocarbons and aromatic compounds such as benzene and toluene are described. The latter were shown to accumulate specifically in incubators. Isopropyl alcohol was the most dominant product found, though it was not used by the laboratory staff. Concentrations of this agent were low in incubator air, indicating that it was probably absorbed by the water in the pan or by culture medium. Measures to counter CAC are proposed, including the use of activated carbon filters and oxidizing material placed in the central air handling systems, in separate free-standing units or even inside the incubators. PMID:9308805

  1. Urban air pollution and health inequities: a workshop report.

    PubMed Central

    2001-01-01

    Over the past three decades, an array of legislation with attendant regulations has been implemented to enhance the quality of the environment and thereby improve the public's health. Despite the many beneficial changes that have followed, there remains a disproportionately higher prevalence of harmful environmental exposures, particularly air pollution, for certain populations. These populations most often reside in urban settings, have low socioeconomic status, and include a large proportion of ethnic minorities. The disparities between racial/ethnic minority and/or low-income populations in cities and the general population in terms of environmental exposures and related health risks have prompted the "environmental justice" or "environmental equity" movement, which strives to create cleaner environments for the most polluted communities. Achieving cleaner environments will require interventions based on scientific data specific to the populations at risk; however, research in this area has been relatively limited. To assess the current scientific information on urban air pollution and its health impacts and to help set the agenda for immediate intervention and future research, the American Lung Association organized an invited workshop on Urban Air Pollution and Health Inequities held 22-24 October 1999 in Washington, DC. This report builds on literature reviews and summarizes the discussions of working groups charged with addressing key areas relevant to air pollution and health effects in urban environments. An overview was provided of the state of the science for health impacts of air pollution and technologies available for air quality monitoring and exposure assessment. The working groups then prioritized research needs to address the knowledge gaps and developed recommendations for community interventions and public policy to begin to remedy the exposure and health inequities. PMID:11427385

  2. A Qualitative Exploration of Less Acculturated Mexican Mothers' Safety Perceptions of Herbs, Medicines, and Cleaners in the Home.

    PubMed

    Crosslin, Katie; Tsai, Ray; Massey-Stokes, Marilyn

    2016-04-01

    Childhood poisoning is a leading public health concern in our society. The death rate from unintentional poisonings among children has increased by 80% from 2000 to 2009. Immigrant children are also at-risk. A qualitative study, consisting of a pile sort, was conducted among immigrant Mexican mothers to determine their safety perceptions of commonly used medicines, herbs, and cleaners. Participants (N = 35) were selected for semi-structured interviews from a pediatric primary care clinic in the Dallas/Fort Worth Metroplex. Some mothers over-estimated their children's ability to discern the dangers of substances, relied heavily on sensory skills of children, and perceived a medicine as safe after successful use in the past. Other mothers were more cognizant of allergic reactions, ingestion, and the need to store substances carefully. Brief interventions that incorporate culturally-appropriate safety messages are needed to assist Mexican mothers in creating a safe home environment. PMID:25801449

  3. Impact of regular relaxation training on the cardiac autonomic nervous system of hospital cleaners and bank employees.

    PubMed

    Toivanen, H; Länsimies, E; Jokela, V; Hänninen, O

    1993-10-01

    The work-related strain of 50 female hospital cleaners and 48 female bank employees was recorded during a period of rationalization in the workplace, and the effect of daily relaxation to help the workers cope was tested. The subjects were arranged into age-matched pairs and randomly allocated into intervention and reference groups. The intervention period lasted six months. The relaxation method was brief and easily introduced as an alternative break in the workplace. Each training session lasted 15 min. A microcomputer-based system was used to record heart rate variability in response to quiet breathing, the Valsalva maneuver, deep breathing, and active orthostatic tests. Cardiac reflexes indicated that occupational strain (especially of a mental nature) caused the functioning of the autonomic nervous system to deteriorate. Regular deep relaxation normalized the function and improved the ability to cope. PMID:8296180

  4. Work-Related Pain and Injury and Barriers to Workers’ Compensation Among Las Vegas Hotel Room Cleaners

    PubMed Central

    Scherzer, Teresa; Rugulies, Reiner; Krause, Niklas

    2005-01-01

    Objectives. We examined the prevalence of work-related pain and injury and explored barriers to and experiences of reporting among workers. Methods. We surveyed 941 unionized hotel room cleaners about work-related pain, injury, disability, and reporting. Results. During the past 12 months, 75% of workers in our study experienced work-related pain, and 31% reported it to management; 20% filed claims for workers’ compensation as a result of work-related injury, and 35% of their claims were denied. Barriers to reporting injury included “It would be too much trouble” (43%), “I was afraid” (26%), and “I didn’t know how” (18%). An estimated 69% of medical costs were shifted from employers to workers. Conclusions. The reasons for underreporting and the extent of claim denial warrant further investigation. Implications for worker health and the precise quantification of shifting costs to workers also should be addressed. PMID:15727981

  5. Novel method utilizing microbial treatment for cleaner production of diosgenin from Dioscorea zingiberensis C.H. Wright (DZW).

    PubMed

    Wei, Mi; Bai, Yun; Ao, Mingzhang; Jin, Wenwen; Yu, Panpan; Zhu, Min; Yu, Longjiang

    2013-10-01

    A novel method utilizing microbial treatment for cleaner production of diosgenin from Dioscorea zingiberensis C.H. Wright (DZW) was presented. A new Bacillus pumilus HR19, which has the great ability to secrete pectinase, was screened and applied in the microbial treatment. Low-pressure steam expansion pretreatment (LSEP) was employed in advance to assist microbial treatment efficiently in releasing saponins, which are the precursors of diosgenin. Compared with the traditional process of acid hydrolysis, this novel process reduced the consumptions of water, acid and organic solvent by more than 92.5%, 97.0%, 97.0%, respectively, while simultaneously increasing the diosgenin yield by 6.21%. In addition, the microbial treatment was more efficient than enzymatic treatment, which arised from that microorganisms could be induced to secrete related enzymes by the compositions of DZW and relieve product inhibition by utilizing enzyme hydrolysates. PMID:23973974

  6. 14 CFR 382.3 - What do the terms in this rule mean?

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... arrangement, to engage in air transportation. Commuter carrier means an air taxi operator as defined in 14 CFR..., muscular dystrophy, multiple sclerosis, cancer, heart disease, diabetes, mental retardation,...

  7. Air Pollution Studies in Metromanila and Catalysis Technology Towards Clean Air Philippines

    NASA Astrophysics Data System (ADS)

    Gallardo, S. M.

    - Considerable air quality and emission data gathered in Metropolitan Manila (MM) led to the development of automobile exhaust treatment catalysts as well as their continued improvement. Findings of a 5-year (1993-1998) collaborative work on the development of base metal oxide catalysts for automobile exhaust are summarized here. One study in 1991 reveals an average 16% increase in the number of motor vehicles in MM where 16% are new and the rest are old ones. Another study in 1992 shows the CO and hydrocarbon emission levels from different types of motor vehicles in MM as a function of the age of the vehicle, type of fuel, and the operating condition. Reports of the Department of Environment and Natural Resources (DENR) and other related studies also provided data showing the quality of air in MM. Currently, there are several requirements to further improve the catalyst performance towards the reduction of NOX and to develop catalyst-sorbent for simultaneous NOX-SOX removal. This is so because of the present condition of rain acidification that is found in certain places in MM. These air quality and emission data are needed not only to establish practical emission standards for motor vehicles and the stationary industries and power plants but also in the development of technologies for air pollution control and other clean technologies for cleaner air in the country.

  8. Piston reciprocating compressed air engine

    SciTech Connect

    Cestero, L.G.

    1987-03-24

    A compressed air engine is described comprising: (a). a reservoir of compressed air, (b). two power cylinders each containing a reciprocating piston connected to a crankshaft and flywheel, (c). a transfer cylinder which communicates with each power cylinder and the reservoir, and contains a reciprocating piston connected to the crankshaft, (d). valve means controlled by rotation of the crankshaft for supplying compressed air from the reservoir to each power cylinder and for exhausting compressed air from each power cylinder to the transfer cylinder, (e). valve means controlled by rotation of the crankshaft for supplying from the transfer cylinder to the reservoir compressed air supplied to the transfer cylinder on the exhaust strokes of the pistons of the power cylinders, and (f). an externally powered fan for assisting the exhaust of compressed air from each power cylinder to the transfer cylinder and from there to the compressed air reservoir.

  9. Air resources

    SciTech Connect

    1995-10-01

    This section describes the ambient (surrounding) air quality of the TVA region, discusses TVA emission contributions to ambient air quality, and identifies air quality impacts to human health and welfare. Volume 2 Technical Document 2, Environmental Consequences, describes how changes in TVA emissions could affect regional air quality, human health, environmental resources, and materials. The primary region of the affected environment is broadly defined as the state of Tennessee, as well as southern Kentucky, western Virginia, southern West Virginia, western North Carolina, and northern Georgia, Alabama, and Mississippi. This area represents the watershed of the Tennessee River and the 201 counties of the greater TVA service area. Emissions from outside the Tennessee Valley region contribute to air quality in the Valley. Also, TVA emissions are transported outside the Valley and have some impact on air quality beyond the primary study area. Although the study area experiences a number of air quality problems, overall air quality is good.

  10. Released air during vapor and air cavitation

    NASA Astrophysics Data System (ADS)

    Jablonská, Jana; Kozubková, Milada

    2016-06-01

    Cavitation today is a very important problem that is solved by means of experimental and mathematical methods. The article deals with the generation of cavitation in convergent divergent nozzle of rectangular cross section. Measurement of pressure, flow rate, temperature, amount of dissolved air in the liquid and visualization of cavitation area using high-speed camera was performed for different flow rates. The measurement results were generalized by dimensionless analysis, which allows easy detection of cavitation in the nozzle. For numerical simulation the multiphase mathematical model of cavitation consisting of water and vapor was created. During verification the disagreement with the measurements for higher flow rates was proved, therefore the model was extended to multiphase mathematical model (water, vapor and air), due to release of dissolved air. For the mathematical modeling the multiphase turbulence RNG k-ɛ model for low Reynolds number flow with vapor and air cavitation was used. Subsequently the sizes of the cavitation area were verified. In article the inlet pressure and loss coefficient depending on the amount of air added to the mathematical model are evaluated. On the basis of the approach it may be create a methodology to estimate the amount of released air added at the inlet to the modeled area.

  11. ENGINEERING BULLETIN: AIR STRIPPING OF AQUEOUS SOLUTIONS

    EPA Science Inventory

    Air striding is a means to transfer contaminants from aqueous solutions to air. ontaminants are not destroyed by air stripping but are physically separated from the aqueous solutions. ontaminant vapors are transferred into the air stream and, if necessary, can be treated by incin...

  12. Air Pollution.

    ERIC Educational Resources Information Center

    Gilpin, Alan

    A summary of one of our most pressing environmental problems, air pollution, is offered in this book by the Director of Air Pollution Control for the Queensland (Australia) State Government. Discussion of the subject is not restricted to Queensland or Australian problems and policies, however, but includes analysis of air pollution the world over.…

  13. The relationship between low back pain and leisure time physical activity in a working population of cleaners - a study with weekly follow-ups for 1 year

    PubMed Central

    2012-01-01

    Background Low back pain (LBP) and leisure time physical activity (LTPA) are considered to be closely related, and clinical guidelines for the treatment of acute LBP recommend patients stay physically active. However, the documentation for this recommendation is sparse and based on studies involving patient populations. The purpose of the study was (1) to investigate the correlation between LBP and LTPA on a weekly basis over the course of a year in a high-risk group of cleaners; and (2) to investigate if maintaining LTPA during an episode of acute LBP has a positive effect on LBP intensity in the subsequent 4 weeks. Methods 188 cleaners consented to participate in a 52-week text message survey about hours of LTPA and intensity of LBP (from 0 to 9) over the previous 7 days. The correlation between LBP and LTPA was calculated by Pearson correlation coefficient. During an episode of acute LBP, a mixed effect logistic regression model was used to investigate whether cleaners who maintain LTPA have a lower pain intensity and higher probability of returning to initial pain intensity within the following four weeks compared with cleaners who decrease LTPA during acute LBP. Results The correlation between weekly LTPA and LBP data was negative, but numerically low (r = -0.069) and statistically insignificant (p = 0.08). Among the 82 cleaners experiencing at least one episode of acute LBP, those maintaining LTPA during an episode of acute LBP did not have a lower pain intensity (average LBP intensity difference between groups of 0.06; 95% confidence interval (95% CI) of -0.417 to 0.539) or higher probability of returning to initial pain level (Odds ratio 1,02; 95% CI of 0.50 to 2.09) in the following four weeks compared with cleaners decreasing LTPA during acute LBP. Conclusions Hours of LTPA and intensity of LBP measured on a weekly basis throughout a year showed no close correlation. Maintaining LTPA during an episode of acute LBP did not result in a positive effect on

  14. Education and Ultimate Meaning

    ERIC Educational Resources Information Center

    Schinkel, Anders

    2015-01-01

    Richard Peters and John White have both argued that education should contribute to the meaning people are able to find in or give to life. Both dismiss the idea of ultimate or profound meaning ("the meaning of life") in favour of ordinary meaning, or "meaning in life". Thus they exemplify the trend visible also in the general…

  15. Estimating the Mean Annual Surface Air Temperature at Armagh Observatory, Northern Ireland, and the Global Land-Ocean Temperature Index for Sunspot Cycle 24, the Current Ongoing Sunspot Cycle

    NASA Technical Reports Server (NTRS)

    Wilson, Robert M.

    2013-01-01

    surface air temperature (ASAT) and the Global Land-Ocean Temperature Index (GLOTI) in relation to SSN and the SC in order to determine their likely values during SC24. Hence, it may provide insight as to whether solar forcing of global temperature is now lessening as a contributor to global warming, thereby indicating a possible cooling in the near term immediate future that potentially could ameliorate the effect of increased anthropogenic warming.

  16. AIR COOLED NEUTRONIC REACTOR

    DOEpatents

    Fermi, E.; Szilard, L.

    1958-05-27

    A nuclear reactor of the air-cooled, graphite moderated type is described. The active core consists of a cubicle mass of graphite, approximately 25 feet in each dimension, having horizontal channels of square cross section extending between two of the opposite faces, a plurality of cylindrical uranium slugs disposed in end to end abutting relationship within said channels providing a space in the channels through which air may be circulated, and a cadmium control rod extending within a channel provided in the moderator. Suitable shielding is provlded around the core, as are also provided a fuel element loading and discharge means, and a means to circulate air through the coolant channels through the fuel charels to cool the reactor.

  17. Air pollution and chronic airway diseases: what should people know and do?

    PubMed Central

    Jiang, Xu-Qin; Feng, Di

    2016-01-01

    The health effects of air pollution remain a public health concern worldwide. Exposure to air pollution has many substantial adverse effects on human health. Globally, seven million deaths were attributable to the joint effects of household and ambient air pollution. Subjects with chronic respiratory diseases such as chronic obstructive pulmonary disease (COPD) and asthma are especially vulnerable to the detrimental effects of air pollutants. Air pollution can induce the acute exacerbation of COPD and onset of asthma, increase the respiratory morbidity and mortality. The health effects of air pollution depend on the components and sources of pollutants, which varied with countries, seasons, and times. Combustion of solid fuels is a major source of air pollutants in developing countries. To reduce the detrimental effects of air pollution, people especially those with COPD or asthma should be aware of the air quality and take extra measures such as reducing the time outdoor and wearing masks when necessary. For reducing the air pollutants indoor, people should use clean fuels and improve the stoves so as to burn fuel more efficiently and vent emissions to the outside. Air cleaners that can improve the air quality efficiently are recommended. PMID:26904251

  18. [Darwinism and the meaning of "meaning"].

    PubMed

    Castrodeza, Carlos

    2009-01-01

    The problem of the meaning of life is herewith contemplated from a Darwinian perspective. It is argued how factors such as existential depression, the concern about the meaning of "meaning," the problem of evil, death as the end of our personal identity, happiness as an unachievable goal, etc. may well have an adaptive dimension "controlled" neither by ourselves nor obscure third parties (conspiracy theories) but "simply" by our genes (replicators in general) so that little if anything is to be done to find a radical remedy for the human condition. PMID:21032944

  19. Air conditioning system

    DOEpatents

    Lowenstein, Andrew; Miller, Jeffrey; Gruendeman, Peter; DaSilva, Michael

    2005-02-01

    An air conditioner comprises a plurality of plates arranged in a successively stacked configuration with portions thereof having a spaced apart arrangement, and defining between successive adjacent pairs of plates at the spaced apart portions a first and second series of discrete alternating passages wherein a first air stream is passed through the first series of passages and a second air stream is passed through the second series of passages; and said stacked configuration of plates forming integrally therewith a liquid delivery means for delivering from a source a sufficient quantity of a liquid to the inside surfaces of the first series of fluid passages in a manner which provides a continuous flow of the liquid from a first end to a second end of the plurality of plates while in contact with the first air stream.

  20. Study on demetalization of sewage sludge by sequential extraction before liquefaction for the production of cleaner bio-oil and bio-char.

    PubMed

    Leng, Lijian; Yuan, Xingzhong; Shao, Jianguang; Huang, Huajun; Wang, Hou; Li, Hui; Chen, Xiaohong; Zeng, Guangming

    2016-01-01

    Demetalization of sewage sludge (SS) by sequential extraction before liquefaction was implemented to produce cleaner bio-char and bio-oil. Demetalization steps 1 and 2 did not cause much organic matter loss on SS, and thus the bio-oil and bio-char yields and the compositions of bio-oils were also not affected significantly. However, the demetalization procedures resulted in the production of cleaner bio-chars and bio-oils. The total concentrations and the acid soluble/exchangeable fraction (F1 fraction, the most toxic heavy metal fraction) of heavy metals (Cu, Cr, Pb, Zn, and Cd) in these products were significantly reduced and the environmental risks of these products were also relived considerably compared with those produced from raw SS, respectively. Additionally, these bio-oils had less heavy fractions. Demetalization processes with removal of F1 and F2 fractions of heavy metals would benefit the production of cleaner bio-char and bio-oil by liquefaction of heavy metal abundant biomass like SS. PMID:26512854

  1. Air scrubber for organic solvent removal

    SciTech Connect

    Hawes, P.B.

    1992-02-18

    This patent describes an air scrubber. It comprises: a closed air loop; a cabinet within the air loop; a layer of permeable growth medium near the bottom of the cabinet containing aerobic microorganisms and plants; means for maintaining a portion of the growth medium submerged in water; an air space above the growth medium to accommodate the plants; and means for passing air upwardly through at least a portion of the submerged growth medium. An air scrubber as recited in claim 1 comprising a plurality of water outlets at differing elevations for adjusting the depth of water in the cabinet.

  2. Cleaner co-combustion of lignite-biomass-waste blends by utilising inhibiting compounds of toxic emissions.

    PubMed

    Skodras, G; Palladas, A; Kaldis, S P; Sakellaropoulos, G P

    2007-04-01

    In this paper, the co-combustion behaviour of coal with wastes and biomass and the related toxic gaseous emissions were investigated. The objective of this work is to add on towards a cleaner co-combustion of lignite-waste-biomass blends by utilizing compounds that could inhibit the formation of toxic pollutants. A series of co-combustion tests was performed in a pilot scale incinerator, and the emissions of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) were measured. The co-combustion behaviour of lignite with olive kernels, MDF and sawdust was studied and the ability of additives such as urea, almond shells and municipal sewage sludge to reduce the PCDD/F emissions was examined. All blends were proven good fuels and reproducible combustion conditions were achieved. The addition of inhibitors prior to combustion showed in some cases, relatively high PCDD/F emissions reduction. Among the inhibitors tested, urea seems to achieve a reduction of PCDD/F emissions for all fuel blends, while an unstable behaviour was observed for the others. PMID:17204304

  3. Petroleum solvent mortality study of Oklahoma dry cleaners. Volume 2. Final report, 1 January 1986-31 March 1988

    SciTech Connect

    Asal, N.R.; Coleman, R.L.; Petrone, R.L.; Owen, W.; Walsworth, S.

    1988-06-30

    The association between exposures to the primary petroleum solvents used in commercial dry-cleaning processes and various causes of death was investigated. Each commercial dry-cleaning establishment in Oklahoma was classified according to the solvent or solvents in use from 1941 to 1983, based on data from the State Dry Cleaners Board. A cohort with known solvent exposures was identified. The proportionate mortality ratios and standardized mortality ratios were determined for all major causes of death. Nearly 59% were white males, with an average exposure of 10.5 years. No excess in overall cancer mortality was found. Significant excesses were noted for mental, psychoneurotic, and personality disorders due to alcoholism; genitourinary system due to acute nephritis, chronic nephritis, and renal sclerosis; bone and organ movement due to arthritis and spondylitis. An excess in cancers of the respiratory system was identified with excesses in mortality due to trachea, bronchus, and lung cancer among those dying at age 65 or older. A 45% excess in proportionate mortality due to pancreatic cancer was found. Only on analysis of petroleum-solvent exposure to white males was an excess found for kidney cancer. Moderately increased incidents of skin and bone cancer were found. Volume 1 is also available.

  4. 14 CFR 330.3 - What do the terms used in this part mean?

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... than a commuter air carrier, that holds authority issued under 14 CFR part 298 and 14 CFR part 121 or part 135. Available seat-miles (ASMs) means the aircraft miles flown on each flight stage by an air... carrier means an air carrier as defined in 14 CFR 298.2(e) that holds a commuter air carrier...

  5. Meanings and Reflective Teaching.

    ERIC Educational Resources Information Center

    Stone, Lynda

    Meaning constructs are aspects of a person's cultural worldview. They are those aspects that philosophers often write about as a means by which to make sense of the world. Teachers carry their worldviews and meaning constructs into the classrooms with them. Similarly to teachers, reflective teaching proponents hold meaning constructs that are…

  6. Education for Making Meaning

    ERIC Educational Resources Information Center

    Nash, Robert J.; Jang, Jennifer J. J.

    2014-01-01

    This chapter explains the meaning of meaning-making for the quarterlife generation. It describes what is called the meaning-quest--consisting of nine core meaning-making questions--and offers two examples of the pedagogy that the authors use in working with students.

  7. 40 CFR 65.46 - Alternative means of emission limitation.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Alternative means of emission limitation. 65.46 Section 65.46 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONSOLIDATED FEDERAL AIR RULE Storage Vessels § 65.46 Alternative means of...

  8. Air Pollution.

    ERIC Educational Resources Information Center

    Fox, Donald L.

    1989-01-01

    Materials related to air pollution are reviewed for the period January 1987, to October 1988. The topics are pollution monitoring, air pollution, and environmental chemistry. The organization consists of two major analytical divisions: (1) gaseous methods; and (2) aerosol and particulate methods. (MVL)

  9. Air Pollution.

    EPA Science Inventory

    Air quality is affected by many types of pollutants that are emitted from various sources, including stationary and mobile. These sources release both criteria and hazardous air pollutants, which cause health effects, ecological harm, and material damage. They are generally categ...

  10. Means and the Mean Value Theorem

    ERIC Educational Resources Information Center

    Merikoski, Jorma K.; Halmetoja, Markku; Tossavainen, Timo

    2009-01-01

    Let I be a real interval. We call a continuous function [mu] : I x I [right arrow] [Bold R] a proper mean if it is symmetric, reflexive, homogeneous, monotonic and internal. Let f : I [right arrow] [Bold R} be a differentiable and strictly convex or strictly concave function. If a, b [image omitted] I with a [not equal to] b, then there exists a…

  11. 30 CFR 250.302 - Definitions concerning air quality.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Definitions concerning air quality. 250.302... Definitions concerning air quality. For purposes of §§ 250.303 and 250.304 of this part: Air pollutant means..., pursuant to section 109 of the Clean Air Act, national primary or secondary ambient air quality...

  12. Air supply distributor for fireplaces

    SciTech Connect

    Eberhardt, H.A.

    1984-09-18

    An air supply distributor for fireplaces having an opening in the hearth for the supply of relatively cold air is used in combination with means, such as a log holder or grate, for supporting combustible products and comprises a pair of side walls and a top cover. The distributor is adapted to be positioned under the log holder or grate to overlie the hearth opening so that relatively cold air passing through the hearth opening is directed toward the front opening of the fireplace from which it passes to the fire for supporting combustion thereof thereby minimizing the amount of air drawn from the room.

  13. Meaning of Muscular Dystrophy

    MedlinePlus

    ... Help White House Lunch Recipes The Meaning of Muscular Dystrophy KidsHealth > For Kids > The Meaning of Muscular Dystrophy ... you know someone who has MD. What Is Muscular Dystrophy? Muscular dystrophy (say: MUS-kyoo-lur DIS-troh- ...

  14. Mean Solar Time

    NASA Astrophysics Data System (ADS)

    Murdin, P.

    2000-11-01

    The time system in use for most civil and many astronomical purposes and based on the motion of a hypothetical object called the mean Sun, the right ascension of which increases from day to day at a uniform rate. The local mean time is defined to be the local hour angle of the mean Sun plus 12 h. Greenwich mean time is taken as the standard for reference; the term Universal Time (UT) is synonymou...

  15. Meaning the Missing Piece.

    ERIC Educational Resources Information Center

    Nelson, Katherine

    Issues of meaning have become central concerns of research on language development. There are at least four reasons for the neglect of meaning by earlier researchers. First, Chomsky's original theory assumed that syntax could be described and explained independently of meaning. Second, linguists had long assumed that semantics was too messy and…

  16. Radioactive air emissions notice of construction HEPA filtered vacuum radioactive air emission units

    SciTech Connect

    JOHNSON, R.E.

    1999-09-01

    This notice of construction (NOC) requests a categorical approval for construction and operation of certain portable high-efficiency particulate air (HEPA) filtered vacuum radionuclide airborne emission units (HVUs). Approval of this NOC application is intended to allow operation of the HVUs without prior project-specific approval. This NOC does not request replacement or supersedence of any previous agreements/approvals by the Washington State Department of Health for the use of vacuums on the Hanford Site. These previous agreement/approvals include the approved NOCs for the use of EuroClean HEPA vacuums at the T Plant Complex (routine technical meeting 12/10/96) and the Kelly Decontamination System at the Plutonium-Uranium Extraction (PUREX) Plant (routine technical meeting 06/25/96). Also, this NOC does not replace or supersede the agreement reached regarding the use of HEPA hand-held/shop-vacuum cleaners for routine cleanup activities conducted by the Environmental Restoration Project. Routine cleanup activities are conducted during the surveillance and maintenance of inactive waste sites (Radioactive Area Remedial Action Project) and inactive facilities. HEPA hand-held/shop-vacuum cleaners are used to clean up spot surface contamination areas found during outdoor radiological field surveys, and to clean up localized radiologically contaminated material (e.g., dust, dirt, bird droppings, animal feces, liquids, insects, spider webs, etc.). This agreement, documented in the October 12, 1994 Routine Meeting Minutes, is based on routine cleanup consisting of spot cleanup of low-level contamination provided that, in each case, the source term potential would be below 0.1 millirem per year.

  17. Relative Brain and Brain Part Sizes Provide Only Limited Evidence that Machiavellian Behaviour in Cleaner Wrasse Is Cognitively Demanding

    PubMed Central

    Chojnacka, Dominika; Isler, Karin; Barski, Jaroslaw Jerzy; Bshary, Redouan

    2015-01-01

    It is currently widely accepted that the complexity of a species’ social life is a major determinant of its brain complexity, as predicted by the social brain hypothesis. However, it remains a challenge to explain what social complexity exactly is and what the best corresponding measures of brain anatomy are. Absolute and relative size of the brain and of the neocortex have often been used as a proxy to predict cognitive performance. Here, we apply the logic of the social brain hypothesis to marine cleaning mutualism involving the genus Labroides. These wrasses remove ectoparasites from ‘client’ reef fish. Conflict occurs as wrasse prefer client mucus over ectoparasites, where mucus feeding constitutes cheating. As a result of this conflict, cleaner wrasse show remarkable Machiavellian-like behaviour. Using own data as well as available data from the literature, we investigated whether the general brain anatomy of Labroides provides any indication that their Machiavellian behaviour is associated with a more complex brain. Neither data set provided evidence for an increased encephalisation index compared to other wrasse species. Published data on relative sizes of brain parts in 25 species of the order Perciformes suggests that only the diencephalon is relatively enlarged in Labroides dimidiatus. This part contains various nuclei of the social decision making network. In conclusion, gross brain anatomy yields little evidence for the hypothesis that strategic behaviour in cleaning selects for larger brains, while future research should focus on more detailed aspects like the sizes of specific nuclei as well as their cryoarchitectonic structure and connectivity. PMID:26263490

  18. A review of potential pathogens of sea lice and the application of cleaner fish in biological control.

    PubMed

    Treasurer, James W

    2002-06-01

    There are many examples of successful biological control of pest populations in aquatic environments. This approach to sea louse control has environmental benefits and is cost-effective. The range of possible pathogens of lice is reviewed and epibionts recorded from sea lice, including the monogenean Udonella caligorum and ciliates, are examined. Baculoviruses when ingested by insects form occlusion bodies resulting in severe damage to the digestive system and subsequent death, and this may be a promising approach. Cleaner wrasse (Labridae) have been stocked commercially with farmed salmon since 1989, and recent work on improving the method is reviewed. Wrasse are sourced from a wild fishery and stocked at ratios of 1 to 25-150 salmon. Over 5 million wrasse are stocked annually in Norway and c 30% of smolts in Scotland were stocked with wrasse until 1998, when an outbreak of infections salmon anaemia (ISA) deterred many farmers from transferring wild fish to cages. A case study is given showing that salmon in cages stocked with wrasse had a burden of one to eight lice through the first year compared with up to 40 lice per fish on unprotected and untreated fish. Electivity indices were used to compare the relative composition of lice developmental stages on salmon in stocked and unstocked cages, and adult male and female lice were found to comprise only 6% of the population in cages with wrasse, compared with 49% adults on fish in control cages. Measures to improve the efficacy of wrasse as a way of cleaning salmon in the second production year include the use of refuges to assist over-wintering survival, and stocking ballan wrasse. Health hygiene includes sourcing wrasse in the farm locality, testing for pathogens, vaccination of wrasse and ultimately rearing wrasse for stocking. The role of wrasse in an IPM strategy is described. PMID:12138621

  19. Meaning in Context.

    PubMed

    Gerrig, Richard J

    2015-01-01

    People often encounter language in contexts that provide meanings that go beyond previous experience. For example, people recover metaphorical meanings that displace literal meanings for the same words. For such cases, researchers have addressed the question of whether contextual support allows people to truncate or eliminate consideration of meanings that precede specific contexts. The article reviews 3 domains in which this question has prompted research: recovery of metaphorical meanings, understanding of noun-noun combinations, and assimilation of actions within fantastic narrative worlds. PMID:26255435

  20. Air Pollution

    MedlinePlus

    ... tobacco smoke. How is air pollution linked to climate change? While climate change is a global process, it ... ozone levels are also a concern. Impacts of Climate Change on Human Health in the United States: A ...

  1. Air Apparent.

    ERIC Educational Resources Information Center

    Harbster, David A.

    1988-01-01

    Explains the principle upon which a barometer operates. Describes how to construct two barometric devices for use in the classroom that show air's changing pressure. Cites some conditions for predicting weather. (RT)

  2. Air intake side secondary air supply system for an internal combustion engine

    SciTech Connect

    Kobayashi, H.; Tomobe, N.

    1987-03-10

    This patent describes an air intake side secondary air supply system for an internal combustion engine having a choke valve and a throttle valve in an intake air passage. The system is adapted to supply an air intake side secondary air into an intake air passage downstream of the throttle valve by a control valve and in response to an operating condition of the engine during a cold operation of the engine. The improvement described here comprises means for detecting a no-load operating state of the engine during the cold operation of the engine in which the choke valve is actuated to close the intake air passage, and means for stopping a supply of the air intake side secondary air upon detection of the non-load operating state so as to enrich an air-fuel mixture supplied to the engine.

  3. Air Quality and Road Emission Results for Fort Stewart, Georgia

    SciTech Connect

    Kirkham, Randy R.; Driver, Crystal J.; Chamness, Mickie A.; Barfuss, Brad C.

    2004-02-02

    The Directorate of Public Works Environmental & Natural Resources Division (Fort Stewart /Hunter Army Airfield) contracted with the Pacific Northwest National Laboratory (PNNL) to monitor particulate matter (PM) concentrations on Fort Stewart, Georgia. The purpose of this investigation was to establish a PM sampling network using monitoring equipment typically used in U.S. Environmental Protection Agency (EPA) ''saturation sampling'', to determine air quality on the installation. In this initial study, the emphasis was on training-generated PM, not receptor PM loading. The majority of PM samples were 24-hr filter-based samples with sampling frequency ranging from every other day, to once every six days synchronized with the EPA 6th day national sampling schedule. Eight measurement sites were established and used to determine spatial variability in PM concentrations and evaluate whether fluctuations in PM appear to result from training activities and forest management practices on the installation. Data collected to date indicate the average installation PM2.5 concentration is lower than that of nearby urban Savannah, Georgia. At three sites near the installation perimeter, analyses to segregate PM concentrations by direction of air flow across the installation boundary indicate that air (below 80 ft) leaving the installation contains less PM2.5 than that entering the installation. This is reinforced by the observation that air near the ground is cleaner on average than the air at the top of the canopy.

  4. 40 CFR 257.3-7 - Air.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Air. 257.3-7 Section 257.3-7... and Practices § 257.3-7 Air. (a) The facility or practice shall not engage in open burning of... 110 of the Clean Air Act, as amended. (c) As used in this section “open burning” means the...

  5. 40 CFR 257.3-7 - Air.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Air. 257.3-7 Section 257.3-7... and Practices § 257.3-7 Air. (a) The facility or practice shall not engage in open burning of... 110 of the Clean Air Act, as amended. (c) As used in this section “open burning” means the...

  6. Development of hydrophilic dental wax without surfactant using a non-thermal air atmospheric pressure plasma jet

    NASA Astrophysics Data System (ADS)

    Lee, Jung-Hwan; Kim, Yong-Hee; Choi, Eun-Ha; Kim, Kwang-Mahn; Kim, Kyoung-Nam

    2014-06-01

    Dental wax (DW), a low-melting and high-molecular-weight organic mixture, is widely used in dentistry for forming moulds of teeth. Hydrophilicity is an important property for DW, as a wet dental investment is used to surround the wax before wax burnout is performed. However, recent attempts to improve the hydrophilicity of DW using a surfactant have resulted in the reduced mechanical properties of the dental investment, leading to the failure of the dental restoration. This study applied a non-thermal air atmospheric pressure plasma jet (AAPPJ) for DW surface treatment and investigated its effect on both DW hydrophilicity and the dental investment's mechanical properties. The results showed that the application of the AAPPJ significantly improved the hydrophilicity of the DW, and that the results were similar to that of cleaner-treated DW using commercially available products with surfactant. A surface chemical analysis indicated that the improvement of hydrophilicity was related to an increase in the number of oxygen-related bonds on the DW surface following the removal of carbon hydrate in both AAPPJ and cleaner-treated DW. However, cleaner treatment compromised the mechanical property of the dental investment when the dental investment was in contact with the treated DW, while the AAPPJ treatment did not. Therefore, the use of AAPPJ to treat DW is a promising method for accurate dental restoration, as it induces an improvement in hydrophilicity without harming the dental investment.

  7. Long Term Effects on Risk Factors for Cardiovascular Disease after 12-Months of Aerobic Exercise Intervention - A Worksite RCT among Cleaners

    PubMed Central

    Korshøj, Mette; Lidegaard, Mark; Krustrup, Peter; Jørgensen, Marie Birk; Søgaard, Karen; Holtermann, Andreas

    2016-01-01

    Objectives Occupational groups exposed to high occupational physical activity have an increased risk for cardiovascular disease (CVD). This may be explained by the high relative aerobic workload. Enhanced cardiorespiratory fitness reduces the relative aerobic workload. Thus, the aim was to evaluate the 12-months effects of worksite aerobic exercise on risk factors for CVD among cleaners. Methods One hundred and sixteen cleaners aged 18–65 years were randomized to a group performing aerobic exercise and a reference group receiving lectures. Outcomes were collected at baseline and after 12-months. A repeated measures 2×2 multi-adjusted mixed-model design was applied to compare the between-group differences using intention-to-treat analysis. Results Between-group differences (p<0.05) were found favouring the aerobic exercise group: cardiorespiratory fitness 2.15 (SE 1.03) mlO2/min/kg, aerobic workload -2.15 (SE 1.06) %HRR, resting HR -5.31 (SE 1.61) beats/min, high sensitive C-reactive protein -0.65 (SE 0.24) μg/ml. The blood pressure was unaltered. Stratified analyses on relative aerobic workload at baseline revealed that those with relative aerobic workloads ≥30% of HRR seems to impose a notable adverse effect on resting and ambulatory blood pressure. Conclusion This long-term worksite aerobic exercise intervention among cleaners led to several beneficial effects, but also potential adverse effects among those with high relative aerobic workloads. Trial Registration Controlled-Trials.com ISRCTN86682076 PMID:27513932

  8. Air diverter for supercharger

    SciTech Connect

    Johnson, K.A.

    1986-10-28

    An engine supercharger is described which consists of a turbine housing, a main turbine wheel of the radial-inflow type located within the turbine housing, a compressor housing having an air entrance passageway, and a compressor wheel of the centrifugal type located within the compressor housing. It also includes a main shaft of annular construction interconnecting the turbine wheel and the compressor wheel whereby the two wheels rotate as a unit, an auxiliary turbine wheel of the axial flow type located downstream from the main turbine wheel, and a fan of the axial flow type located upstream from the compressor wheel. An auxiliary shaft extends within the main shaft between the auxiliary turbine and fan whereby the auxiliary turbine and fan rotate as a unit. An annular air collector chamber means is located immediately downstream from the fan in surrounding relation to the aforementioned entrance passageway for diverting some of the fan air from the compressor wheel. The fan comprises a hub and blades radiating outwardly therefrom. The air collector chamber is defined in part by an annular wall having a free edge located within the fan blade axial profile whereby the annular wall intercepts air discharged from outer tip areas of the fan blades to divert same away from the compressor wheel into the collector chamber.

  9. Air quality in the 21st century: community outreach in North Central Texas.

    PubMed

    Stuckey, H Troy; Sattler, Melanie L

    2003-06-01

    Public education campaigns, to be successful, must repeat simple, consistent messages over time, using various sources and media. During the 2000, 2001, and 2002 ozone seasons, the North Central Texas Council of Governments (NCTCOG) employed a four-pronged, multimedia approach to educate the public about air quality in the Dallas/Fort Worth (DFW) region. The four-pronged approach included several varied information sources:The new Air Pollution Watch/Warning system based on public health and designed using standard meteorological terminology with notices delivered via e-mail, over the radio, during TV weather forecasts, and on electronic road signs.A revamped Web page, including information about current air quality, ozone exceedances, clean air public meetings, and how to "Do Your Share for Cleaner Air".A PowerPoint presentation used to explain the basics of ozone air pollution, the new Air Pollution Watch/Warning system, and the new Dallas/Fort Worth Clean Air Plan to a variety of constituencies, including the media, scientific/technical/academic groups, elected officials, and community/civic organizations. Newsletter updates, published in the Environmental Resources Department's InsidER (with a circulation of around 1500), to educate and keep the public up-to-date about various air quality issues. This paper provides details about the four-pronged approach, and how it incorporates principles of successful public education campaigns. PMID:12676223

  10. Air lifted and propelled vehicle

    SciTech Connect

    Jones, T.E.; Johnson, R.A.

    1987-02-17

    This patent describes a vehicle which rides on air cushion and which is propelled by air, comprising: upper deck means, having a bottom edge which defines the periphery of an area; a thin, flexible sheet located below the upper deck means, extending beneath the bottom edge and secured beneath the bottom edge for defining a plenum that is defined by and closed off by the upper deck means and the sheet. The deck means is shaped within the area defined by its bottom edge for causing the plenum to always be an open space and the upper deck means is rigid enough to maintain that open condition of the plenum; the sheet being secured in a manner permitting the sheet to pillow when air is pressurized in the plenum; and the sheet being perforated below the upper deck means for permitting exit of air from the plenum at a controllable rate through the perforations; the sheet having a large plurality of the perforations dispersed over most of its area below the upper deck means; each of the perforations being a hole.

  11. Air surveillance

    SciTech Connect

    Patton, G.W.

    1995-06-01

    This section of the 1994 Hanford Site Environmental Report summarizes the air surveillance and monitoring programs currently in operation at that Hanford Site. Atmospheric releases of pollutants from Hanford to the surrounding region are a potential source of human exposure. For that reason, both radioactive and nonradioactive materials in air are monitored at a number of locations. The influence of Hanford emissions on local radionuclide concentrations was evaluated by comparing concentrations measured at distant locations within the region to concentrations measured at the Site perimeter. This section discusses sample collection, analytical methods, and the results of the Hanford air surveillance program. A complete listing of all analytical results summarized in this section is reported separately by Bisping (1995).

  12. Processing Film, Processing Meaning

    ERIC Educational Resources Information Center

    Perkowski, Lisa M.

    2015-01-01

    Adolescents are at a ripe age to make meaning and think abstractly (Kerlavage, 1998); yet, they are not "born knowing how to get ideas into materials, or how materials can be manipulated to shape ideas and meaning" (Burton, 2012, p. 14). Adolescents need guidance in understanding abstract concepts, and art teachers play an important role…

  13. The Meaning of Audiolingual.

    ERIC Educational Resources Information Center

    Brooks, Nelson

    This paper constitutes an analysis of the audiolingual concept in terms of what it was originally intended to mean and what it has come to mean in second language teaching. Basic to the concept is the notion that language was originally a matter of oral communication, and that although writing and writing systems are central, they have secondary…

  14. Congruence of Meaning.

    ERIC Educational Resources Information Center

    Suppes, Patrick

    By looking at the history of geometry and the concept of congruence in geometry we can get a new perspective on how to think about the closeness in meaning of two sentences. As in the analysis of congruence in geometry, a definite and concrete set of proposals about congruence of meaning depends essentially on the kind of theoretical framework…

  15. CityAir app: Mapping air-quality perception using people as sensors

    NASA Astrophysics Data System (ADS)

    Castell, Nuria; Fredriksen, Mirjam; Cole-Hunter, Thomas; Robinson, Johanna; Keune, Hans; Nieuwenhuijsen, Mark; Bartonova, Alena

    2016-04-01

    . Currently, 400 + Android OS and 180+ iOS smartphone users in 12+ countries have downloaded, installed and used CityAir. The central advantage of the People as Sensors approach is that it can complement costly physical sensor networks. The observations made in smartphones are shared and other persons can consult those to take decisions as for instance choosing a cleaner route to bicycle to work or avoid exercising in certain areas that day. The drawbacks are limited comparability and interpretability, and the inherent uncertainty. CityAir can be seen as a democratic platform for empowering citizens to contribute to environmental governance, facilitating the communication between the citizen and the decision makers. Citizens are encouraged to participate in sharing their perception on the air quality in their city. Citizens become agents of change by uncovering and sharing their perception of air quality in a place that matters to them. We discuss the current challenges: how to involve citizens in the use of the app and how to communicate and visualize the information in a way that is useful for the citizens; point out possible solutions, and pin-point directions for future research.

  16. Steam iron cleaner poisoning

    MedlinePlus

    Wax PM, Yarema M. Corrosives. In: Shannon MW, Borron SW, Burns MJ, eds. Haddad and Winchester's Clinical ... ed. Philadelphia, PA: Elsevier Saunders; 2007:chap 98. Wax PM, Young A. Caustics. In: Marx JA, Hockberger ...

  17. Cleaner Energy for Cars

    SciTech Connect

    Cropley, Cecelia

    2013-07-18

    Representing the Center for Catalytic Hydrocarbon Functionalization (CCHF), this document is one of the entries in the Ten Hundred and One Word Challenge. As part of the challenge, the 46 Energy Frontier Research Centers were invited to represent their science in images, cartoons, photos, words and original paintings, but any descriptions or words could only use the 1000 most commonly used words in the English language, with the addition of one word important to each of the EFRCs and the mission of DOE: energy. The mission of CCHF is to develop, validate, and optimize new methods to rearrange the bonds of hydrocarbons, implement enzymatic strategies into synthetic systems, and design optimal environments for catalysts that can be used to reversibly functionalize hydrocarbons, especially for more efficient use of natural gas including low temperature conversion to liquid fuels.

  18. Acoustic well cleaner

    DOEpatents

    Maki, Jr., Voldi E.; Sharma, Mukul M.

    1997-01-21

    A method and apparatus are disclosed for cleaning the wellbore and the near wellbore region. A sonde is provided which is adapted to be lowered into a borehole and which includes a plurality of acoustic transducers arranged around the sonde. Electrical power provided by a cable is converted to acoustic energy. The high intensity acoustic energy directed to the borehole wall and into the near wellbore region, redissolves or resuspends the material which is reducing the permeability of the formation and/or restricting flow in the wellbore.

  19. Window cleaner poisoning

    MedlinePlus

    ... Poisoning and Drug Overdose . 4th ed. Philadelphia, PA: Elsevier Saunders; 2007:chap 32. Mycyk MB. Toxic alcohols. ... JG, ed. Emergency Medicine . 2nd ed. Philadelphia, PA: Elsevier Saunders; 2013:chap 151. White SR. Toxic alcohols. ...

  20. Oven cleaner poisoning

    MedlinePlus

    ... the chemical was swallowed, immediately give the person water or milk, unless instructed otherwise ... Services/Millard Fillmore Suburban Hospital, Buffalo, NY. Also reviewed by David Zieve, MD, MHA, ...