Air-Based Remediation Workshop - Section 6 Thermal Systems
Pursuant to the EPA-AIT Implementing Arrangement 7 for Technical Environmental Collaboration, Activity 11 "Remediation of Contaminated Sites," the USEPA Office of International Affairs Organized a Forced Air Remediation Workshop in Taipei to deliver expert training to the Environ...
Summary and recommendations for the NASA/MIT workshop on short haul air transport
NASA Technical Reports Server (NTRS)
Simpson, R. W.
1971-01-01
The material is summarized that was covered by the MIT/NASA Waterville Valley workshop which dealt with the institutional, socio-economic, operational and technological problems associated with introducing new forms of short haul domestic air transportation. It was found that future air systems hold great potential in satisfying society's needs for a low noise, low landspace, high access, high speed, large network system for public travel over distances between 5 and 500 miles. It is concluded that quiet air systems are necessary for obtaining community approval, and is recommended that extremely high priority be assigned to the development of quiet aircraft for future short haul air systems.
NASA Technical Reports Server (NTRS)
Steinberg, Susan L. (Editor); Ming, Doug W. (Editor); Henninger, Don (Editor)
2002-01-01
This NASA Technical Memorandum is a compilation of presentations and discussions in the form of minutes from a workshop entitled 'Plant Production Systems for Microgravity: Critical Issues in Water, Air, and Solute Transport Through Unsaturated Porous Media' held at NASA's Johnson Space Center, July 24-25, 2000. This workshop arose from the growing belief within NASA's Advanced Life Support Program that further advances and improvements in plant production systems for microgravity would benefit from additional knowledge of fundamental processes occurring in the root zone. The objective of the workshop was to bring together individuals who had expertise in various areas of fluid physics, soil physics, plant physiology, hardware development, and flight tests to identify, discuss, and prioritize critical issues of water and air flow through porous media in microgravity. Participants of the workshop included representatives from private companies involved in flight hardware development and scientists from universities and NASA Centers with expertise in plant flight tests, plant physiology, fluid physics, and soil physics.
1999 NASA Seal/secondary Air System Workshop. Volume 1
NASA Technical Reports Server (NTRS)
Steinetz, Bruce M. (Editor); Hendricks, Robert C. (Editor)
2000-01-01
NASA Glenn hosted the Seals/Secondary Air System Workshop on October 28-29, 1999. Each year NASA and our industry and university partners share their respective seal technology development. We use these workshops as a technical forum to exchange recent advancements and "lessons-leamed" in advancing seal technology and solving problems of common interest. As in the past we are publishing two volumes. Volume 1 will be publicly available and volume 2 will be restricted under International Traffic and Arms Regulations (I.T.A.R.). The 1999 NASA Seal/Secondary Air System Workshop was divided into four areas; (i) overviews of the government-sponsored gas turbine programs (NASA Ultra Efficient Engine Technology program and DOE Advanced Turbine System program) and the general aviation program (GAP) with emphasis on program goals and seal needs; (ii) turbine engine seal issues from the perspective of an airline customer (i.e., United Airlines), (iii) sealing concepts, methods and results including experimental facilities and numerical predictions; and (iv) reviews of seal requirements for next generation aerospace vehicles (Trailblazer, Bantam and X-38).
Developing air quality forecasts
NASA Astrophysics Data System (ADS)
Lee, Pius; Saylor, Rick; Meagher, James
2012-05-01
Third International Workshop on Air Quality Forecasting Research; Potomac, Maryland, 29 November to 1 December 2011 Elevated concentrations of both near-surface ozone (O3) and fine particulate matter smaller than 2.5 micrometers in diameter have been implicated in increased mortality and other human health impacts. In light of these known influences on human health, many governments around the world have instituted air quality forecasting systems to provide their citizens with advance warning of impending poor air quality so that they can take actions to limit exposure. In an effort to improve the performance of air quality forecasting systems and provide a forum for the exchange of the latest research in air quality modeling, the International Workshop on Air Quality Forecasting Research (IWAQFR) was established in 2009 and is cosponsored by the U.S. National Oceanic and Atmospheric Administration (NOAA), Environment Canada (EC), and the World Meteorological Organization (WMO). The steering committee for IWAQFR's establishment was composed of Véronique Bouchet, Mike Howe, and Craig Stoud (EC); Greg Carmichael (University of Iowa); Paula Davidson and Jim Meagher (NOAA); and Liisa Jalkanen (WMO). The most recent workshop took place in Maryland.
NASA Technical Reports Server (NTRS)
Ponchak, Denise (Compiler)
2006-01-01
The Integrated Communications, Navigation and Surveillance (ICNS) Technologies Conference and Workshop provides a forum for government, industry, and academic communities performing research and technology development for advanced digital communications, navigation, and surveillance security systems and associated applications supporting the national and global air transportation systems. The event s goals are to understand current efforts and recent results in near- and far-term research and technology demonstration; identify integrated digital communications, navigation and surveillance research requirements necessary for a safe, high-capacity, advanced air transportation system; foster collaboration and coordination among all stakeholders; and discuss critical issues and develop recommendations to achieve the future integrated CNS vision for the national and global air transportation system.
NASA Technical Reports Server (NTRS)
Fujikawa, Gene (Compiler)
2004-01-01
The Integrated Communications, Navigational and Surveillance (ICNS) Technologies Conference and Workshop provides a forum for Government, industry, and academic communities performing research and technology development for advanced digital communications, navigation, and surveillance security systems and associated applications supporting the national and global air transportation systems. The event's goals are to understand current efforts and recent results in near-and far-term research and technology demonstration; identify integrated digital communications, navigation and surveillance research requirements necessary for a safe, high-capacity, advanced air transportation system; foster collaboration and coordination among all stakeholders; and discuss critical issues and develop recommendations to achieve the future integrated CNS vision for the national and global air transportation system.
DOT/FAA Human Factors Workshop on AVIATION. Transcript. Volume I.
1980-11-01
workshop and then will be published in their entirety. F S’ I-N-D-E-X AGENDA PAGE OPENING REMARKS James P . Andersen, Workshop Moderator Director of Air...and Marine Systems Transportation Systems Center Dr. James Costantino, Director Transportation Systems Center Langhorne Bond, Administrator Federal...conference, and it’s now my pleasure to introduce to you the Administrator of the Federal Aviation Administration, Langhorne Bond. MR. BOND: Thank you
1. View looking northeast at the west and south facades ...
1. View looking northeast at the west and south facades of Test Stand 'D' workshop 4222/E-23. Test Stand 'D' tower nitrogen tanks, television camera platform and access stairs are at right of image. Ductwork atop roof is for air conditioning system. - Jet Propulsion Laboratory Edwards Facility, Test Stand D, Workshop, Edwards Air Force Base, Boron, Kern County, CA
Proceedings of the Interagency Workshop on Lighter than Air Vehicles
NASA Technical Reports Server (NTRS)
Vittek, J. F., Jr. (Editor)
1975-01-01
Papers presented at the workshop are reported. Topics discussed include: economic and market analysis, technical and design considerations, manufacturing and operations, design concepts, airship applications, and unmanned and tethered systems.
Efficacy of an outdoor air pollution education program in a community at risk for asthma morbidity.
Dorevitch, Samuel; Karandikar, Abhijay; Washington, Gregory F; Walton, Geraldine Penny; Anderson, Renate; Nickels, Leslie
2008-11-01
Asthma management guidelines recommend avoiding exposure to indoor and outdoor air pollutants. A limitation of such recommendations is that they do not provide information about how the public should obtain and act on air quality information. Although the Air Quality Index (AQI) provides simplified outdoor air quality forecasts, communities with high rates of asthma morbidity tend to have low rates of internet access due to factors such as low socioeconomic status. Assessments of knowledge about air quality among low-income minority communities are lacking, as are community-based programs to educate the public about using the AQI. An air quality education program and system for disseminating air quality information were developed to promote pollutant avoidance during the reconstruction of a major highway in a low-income minority community on Chicago's South Side. The program, which centered on workshops run by community asthma educators, was evaluated using a pre-test, post-test, and 1-year follow-up questionnaire. A total of 120 community workshop participants completed at least a portion of the evaluation process. At baseline, knowledge about air quality was limited. Following the workshops, substantial increases were noted in rates of correct answers to questions about health effects of air pollution, the availability of air quality information, and the color code for an AQI category. Approximately 1 year after the workshops were held, few participants could recall elements of the training. Few participants have internet access, and alternative means of distributing air quality information were suggested by study participants. Baseline knowledge of air quality information was limited in the community studied. Air quality education workshops conducted by community educators can increase knowledge about outdoor air quality and its impact on health over the short term. Refresher workshops or other efforts to sustain the knowledge increase may be useful. Given the known short-term and long-term effects of air quality on morbidity and mortality, air quality education efforts should be further developed, evaluated, and promoted for the general public, for people with underlying cardiopulmonary disease, and given the documented health disparities within the general population, for low-income and minority communities.
First Aviation System Technology Advanced Research (AvSTAR) Workshop
NASA Technical Reports Server (NTRS)
Denery, Dallas G. (Editor); Weathers, Del W. (Editor); Rosen, Robert (Technical Monitor); Edwards, Tom (Technical Monitor)
2001-01-01
This Conference Proceedings documents the results of a two-day NASA/FAA/Industry workshop that was held at the NASA Ames Research Center, located at Moffett Field, CA, on September 21-22, 2000. The purpose of the workshop was to bring together a representative cross section of leaders in air traffic management, from industry. FAA, and academia, to assist in defining the requirements for a new research effort, referred to as AvSTAR Aviation Systems Technology Advanced Research). The Conference Proceedings includes the individual presentation, and summarizes the workshop discussions and recommendations.
NASA Technical Reports Server (NTRS)
Phillips, Brent; Swanda, Ronald L.; Lewis, Michael S.; Kenagy, Randy; Donahue, George; Homans, Al; Kerczewski, Robert; Pozesky, Marty
2004-01-01
The NASA Glenn Research Center organized and hosted the Fourth Integrated Communications, Navigation, and Surveillance (ICNS) Technologies Conference and Workshop, which took place April 26-30, 2004 at the Hyatt Fair Lakes Hotel in Fairfax, Virginia. This fourth conference of the annual series followed the very successful first ICNS Conference (May 1-3, 2001 in Cleveland, Ohio), second ICNS conference (April 29-May 2, 2002 in Vienna, Virginia), and third ICNS conference (May 19-22, 2003 in Annapolis, Maryland). The purpose of the Fourth ICNS Conference was to assemble government, industry and academic communities performing research and development for advanced digital communications, surveillance and navigation systems and associated applications supporting the national and global air transportation systems to: 1) Understand current efforts and recent results in near- and far-term R&D and technology demonstration; 2) Identify integrated digital communications, navigation and surveillance R&D requirements necessary for a safe, secure and reliable, high-capacity, advanced air transportation system; 3) Provide a forum for fostering collaboration and coordination; and 4) Discuss critical issues and develop recommendations to achieve the future integrated CNS vision for national and global air transportation. The workshop attracted 316 attendees from government, industry and academia to address these purposes through technical presentations, breakout sessions, and individual and group discussions during the workshop and after-hours events, and included 16 international attendees. An Executive Committee consisting of representatives of several key segments of the aviation community concerned with CNS issues met on the day following the workshop to consider the primary outcomes and recommendations of the workshop. This report presents an overview of the conference, workshop breakout session results, and the findings of the Executive Committee.
Air-condition Control System of Weaving Workshop Based on LabVIEW
NASA Astrophysics Data System (ADS)
Song, Jian
The project of air-condition measurement and control system based on LabVIEW is put forward for the sake of controlling effectively the environmental targets in the weaving workshop. In this project, which is based on the virtual instrument technology and in which LabVIEW development platform by NI is adopted, the system is constructed on the basis of the virtual instrument technology. It is composed of the upper PC, central control nodes based on CC2530, sensor nodes, sensor modules and executive device. Fuzzy control algorithm is employed to achieve the accuracy control of the temperature and humidity. A user-friendly man-machine interaction interface is designed with virtual instrument technology at the core of the software. It is shown by experiments that the measurement and control system can run stably and reliably and meet the functional requirements for controlling the weaving workshop.
Workshop: Theory an Applications of Coupled Cell Networks
2006-03-22
physical location and environment and the scientific inter- actions with the longer term participants in the PFD programme. Furthermore, the Institute...in generating a tangible air of excitement about the challenges posed by coupled cell systems, both in terms of the mathematical questions, and in the...longer term visitors interacted with the workshop participants, and by focusing on a slightly different collection of themes, the workshop participants
Fourth Annual Workshop on Space Operations Applications and Research (SOAR 90)
NASA Technical Reports Server (NTRS)
Savely, Robert T. (Editor)
1991-01-01
The proceedings of the SOAR workshop are presented. The technical areas included are as follows: Automation and Robotics; Environmental Interactions; Human Factors; Intelligent Systems; and Life Sciences. NASA and Air Force programmatic overviews and panel sessions were also held in each technical area.
1980-03-01
Force -- 4 United States Navy -- 1 National Transportation Safety Board -- I PRIVATE SECTOR (43) University and Research -- 12 Georgia Institute of...States Air Force , Aeronautical Systems Division 6 *1 __________________________________________-our_ TABLE 4 IMPROMPTU PRESENTATIONS Clear Air...Propulsion Laboratory 7 concerning the Air New Zealand DC-10 accident at Mt. Erebus, Antarctica; and John Corbin of the U.S. Air Force Aeronautical
Training for a Place in the Sun.
ERIC Educational Resources Information Center
Fillippini, W. L.
1979-01-01
To train sheet metal workers in energy conservation technology, the National Training Fund (NTF) of the Sheet Metal and Air Conditioning Industry collaborated with universities in developing their apprenticeship curricula on solar-powered environmental systems, a solar air system training film, and NTF instructor training courses and workshops.…
PROCEEDINGS: MULTIPOLLUTANT SORBENT REACTIVITY ...
The report is a compilation of technical papers and visual aids presented by representatives of industry, academia, and government agencies at a workshop on multipollutant sorbent reactivity that was held at EPA's Environmental Research Center in Research Triangle Park, NC, on July 19-20, 1994. There were 16 technical presentations in three sessions, and a panel discussion between six research experts. The workshop was a forum for the exchange of ideas and information on the use of sorbents to control air emissions of acid gases (sulfur dioxide, nitrogen oxides, and hydrogen chloride); mercury and dioxins; and toxic metals, primarily from fossil fuel combustion. A secondary purpose for conducting the workshop was to help guide EPA's research planning activities. A general theme of the workshop was that a strategy of controlling many pollutants with a single system rather than systems to control individual pollutants should be a research goal. Some research needs cited were: hazardous air pollutant removal by flue gas desulfurization systems, dioxin formation and control, mercury control, waste minimization, impact of ash recycling on metals partitioning, impact of urea and sorbents on other pollutants, high temperature filtration, impact of coal cleaning on metals partitioning, and modeling dispersion of sorbents in flue gas. information
2001 NASA Seal/secondary Air System Workshop, Volume 1. Volume 1
NASA Technical Reports Server (NTRS)
Steinetz, Bruce M. (Editor); Hendricks, Robert C. (Editor)
2002-01-01
The 2001 NASA Seal/Secondary Air System Workshop covered the following topics: (i) overview of NASA's Vision for 21st Century Aircraft; (ii) overview of NASA-sponsored Ultra-Efficient Engine Technology (UEET); (iii) reviews of sealing concepts, test results, experimental facilities, and numerical predictions; and (iv) reviews of material development programs relevant to advanced seals development. The NASA UEET overview illustrates for the reader the importance of advanced technologies, including seals, in meeting future turbine engine system efficiency and emission goals. The NASA UEET program goals include an 8-to 15-percent reduction in fuel burn, a 15-percent reduction in CO2, a 70-percent reduction in NOx, CO, and unburned hydrocarbons, and a 30-dB noise reduction relative to program baselines. The workshop also covered several programs NASA is funding to investigate advanced reusable space vehicle technologies (X-38) and advanced space ram/scramjet propulsion systems. Seal challenges posed by these advanced systems include high-temperature operation, resiliency at the operating temperature to accommodate sidewall flexing, and durability to last many missions.
WORKSHOP ON SOURCE EMISSION AND AMBIENT AIR MONITORING OF MERCURY
AN EPA/ORD Workshop on Source Emission and Ambient Air Monitoring of Mercury was held on 9/13-14/99, Bloomington, Minnesota. The purpose of the workshop was to discuss the state-of-the-science in source and ambient air mercury monitoring as well as mercury monitoring research and...
The Outdoor Air Pollution and Brain Health Workshop
Accumulating evidence suggests that air pollution may have a significant impact on central nervous system (CNS) health and disease. To address this issue, the National Institute of Environmental Health Sciences/National Institute of Health convened a panel of research scientists...
Hamilton, David B.; Andrews, Austin K.; Auble, Gregor T.; Ellison, Richard A.; Johnson, Richard A.; Roelle, James E.; Staley, Michael J.
1982-01-01
During the past decade, the southern regions of the U.S. have experienced rapid change which is expected to continue into the foreseeable future. Growth in population, industry, and resource development has been attributed to a variety of advantages such as an abundant and inexpensive labor force, a mild climate, and the availability of energy, water, land, and other natural resources. While this growth has many benefits for the region, it also creates the potential for increased air, water, and solid waste pollution, and modification of natural habitats. A workshop was convened to consider the Mobile Bay area as a site-specific case of growth and its environmental consequences in the southern region. The objectives of the modeling workshop were to: (1) identify major factors of economic development as they relate to growth in the area over the immediate and longer term; (2) identify major environmental and resource management issues associated with this expected growth; and (3) identify and characterize the complex interrelationships among economic and environmental factors. This report summarizes the activities and results of a modeling workshop concerning economic growth and concomitant resource management issues in the Mobile Bay area. The workshop was organized around construction of a simulation model representing the relationships between a series of actions and indicators identified by participants. The workshop model had five major components. An Industry Submodel generated scenarios of growth in several industrial and transportation sectors. A Human Population/Economy Submodel calculated human population and economic variables in response to employment opportunities. A Land Use/Air Quality Submodel tabulated changes in land use, shoreline use, and air quality. A Water Submodel calculated indicators of water quality and quantity for fresh surface water, ground water, and Mobile Bay based on discharge information provided by the Industry and Human Population/Economy Submodels. Finally, a Fish Submodel calculated indicators of habitat quality for finfish and shellfish, utilizing information on water quality and wetlands acreage. The workshop was successful in identifying many of the critical interrelations between components of the Mobile area system. Not all of those interactions, such as the feedback of air quality as a limitation on development, could be incorporated into the workshop model because of the model's broad spatial scale and because of uncertainties or data gaps. Thus, the value of the modeling workshop was in the areas outlines below, rather than in the predictive power of the initial model developed at the workshop. First, participants developed a holistic perspective on the interactions which will determine future economic and environmental trends within the Mobile Bay area. Potential environmental consequences and limitations to grown identified at the workshop included: shoreline and water access; water quality of Mobile Bay; finfish and shellfish habitat quality with respect to dissolved oxygen and coliforms; air quality; and acreage of critical wetland habitat. Second, the model's requirements for specific, quantitative information stimulated supporting analyses, such as economic input-output calculations, which provide additional insight into the Mobile Bay area system. Third, the perspective of the Mobile area as an interacting system was developed in an open, cooperative forum which my provide a foundation for conflict resolution based on common understanding. Finally, the identification of model limitations and uncertainties should be useful in guiding the efficient allocation of future research effort.
This article summarizes the findings from the EPA's Apps and Sensors for Air Pollution Workshop that was held March 26-27 of 2012. The workshop brought together researchers, developers, and community-based groups who have been working with sensors and apps in a variety of settin...
NASA Technical Reports Server (NTRS)
Kuhlthau, A. R. (Editor)
1976-01-01
The workshop was organized around the study of the three basic transfer functions required to evaluate and/or predict passenger acceptance of transportation systems: These are the vehicle, passenger, and value transfer functions. For the purpose of establishing working groups corresponding to the basic transfer functions, it was decided to split the vehicle transfer function into two distinct groups studying surface vehicles and air/marine vehicles, respectively.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Roseman, Mallory; Zikry, Fareeda
Lawrence Livermore National Laboratory’s Center for Global Security Research hosted a workshop to investigate why some consistently predicted threats from science and technology (S&T) have not manifested with the impacts to international security as forecasted. During the workshop, “Dogs That Haven’t Barked: Towards an Understanding of the Absence of Expected Technological Threats,” participants used two specific cases to focus the discussion: biotechnology and man-portable air defense systems (MANPADS).
Advanced Solar Cell Testing and Characterization
NASA Technical Reports Server (NTRS)
Bailey, Sheila; Curtis, Henry; Piszczor, Michael
2005-01-01
The topic for this workshop stems from an ongoing effort by the photovoltaic community and U.S. government to address issues and recent problems associated with solar cells and arrays experienced by a number of different space systems. In April 2003, a workshop session was held at the Aerospace Space Power Workshop to discuss an effort by the Air Force to update and standardize solar cell and array qualification test procedures in an effort to ameliorate some of these problems. The organizers of that workshop session thought it was important to continue these discussions and present this information to the entire photovoltaic community. Thus, it was decided to include this topic as a workshop at the following SPRAT conference.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Auberle, W.M.; Alvarez, V.M.; Leary, J.
1999-07-01
A collaborative program among agencies and professionals in Mexico and the US is designing, developing and delivering specialized workshops for Mexican officials responsible for air quality management. The initial project is development and pilot delivery (Spring 1999) of a workshop for senior officials of SEMARNAP plus selected state and municipal officials. This paper describes the process for design of professional development programs in air quality management for Mexican officials. Key issues include optimum learning styles and delivery techniques; available time of senior managers for education; need for new materials versus adaptation of existing air quality management information; and utilization ofmore » the Internet and asynchronous methods to supplement the traditional workshop format. The paper describes the results of this analysis and design features and content of the initial workshop.« less
Transportation Network Topologies
NASA Technical Reports Server (NTRS)
Alexandrov, Natalia (Editor)
2004-01-01
The existing U.S. hub-and-spoke air transportation system is reaching saturation. Major aspects of the current system, such as capacity, safety, mobility, customer satisfaction, security, communications, and ecological effects, require improvements. The changing dynamics - increased presence of general aviation, unmanned autonomous vehicles, military aircraft in civil airspace as part of homeland defense - contributes to growing complexity of airspace. The system has proven remarkably resistant to change. NASA Langley Research Center and the National Institute of Aerospace conducted a workshop on Transportation Network Topologies on 9-10 December 2003 in Williamsburg, Virginia. The workshop aimed to examine the feasibility of traditional methods for complex system analysis and design as well as potential novel alternatives in application to transportation systems, identify state-of-the-art models and methods, conduct gap analysis, and thus to lay a foundation for establishing a focused research program in complex systems applied to air transportation.
Highlights from the Air Sensors 2014 Workshop
In June 2014, the U.S. Environmental Protection Agency (EPA) hosted its fourth next-generation air monitoring workshop to discuss the current state of the science in air sensor technologies and their applications for environmental monitoring, Air Sensors 2014: A New Frontier. Th...
The initial flight anomalies of Skylab 1
NASA Astrophysics Data System (ADS)
At approximately 63 seconds into the flight of Skylab 1 on May 14, 1973, an anomaly occurred which resulted in the complete loss of the meteoroid shield around the orbital workshop. This was followed by the loss of one of the two solar array systems on the workshop and a failure of the inter stage adapter to separate from the S-II stage of the Saturn V launch vehicle. The investigation reported herein identified the most probable cause of this flight anomaly to be the breakup and loss of the meteoroid shield due to aerodynamic loads that were not accounted for in its design. The breakup of the meteoroid shield, in turn, broke the tie downs that secured one of the solar array systems to the workshop. Complete loss of this solar array system occurred at 593 seconds when the exhaust plume of the S-II stage retro-rockets impacted the partially deployed solar array system. Falling debris from the meteoroid shield also damaged the S-II inter stage adapter ordnance system in such a manner as to preclude separation. Of several possible failure modes of the meteoroid shield that were identified, the most probable in this particular flight was internal pressurization of its auxiliary tunnel which acted to force the forward end of the meteoroid shield away from the shell of the workshop and into the supersonic air stream. The pressurization of the auxiliary tunnel was due to the existence of several openings in the aft region of the tunnel. Another possible failure mode was the separation of the leading edge of the meteoroid shield from the shell of the workshop (particularly in the region of the folded ordnance panel) of sufficient extent to admit ram air pressures under the shield.
NASA Technical Reports Server (NTRS)
Hange, Craig E.
2016-01-01
This presentation will be given at the AIAA Electric Hybrid-Electric Power Propulsion Workshop on July 29, 2016. The workshop is being held so the AIAA can determine how it can support the introduction of electric aircraft into the aerospace industry. This presentation will address the needs of the community within the industry that advocates the use of powered-lift as important new technologies for future aircraft and air transportation systems. As the current chairman of the VSTOL Aircraft Systems Technical Committee, I will be presenting generalized descriptions of the past research in developing powered-lift and generalized observations on how electric and hybrid-electric propulsion may provide advances in the powered-lift field.
DOT National Transportation Integrated Search
2009-05-01
Congress passed the National Parks Air Tour Management Act of 2000 (NPATMA) to regulate commercial air tour operations over units of the National Park System. The Federal Aviation Administration (FAA) and the National Park Service (NPS) are jointly d...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-07-08
...A public workshop is being held to discuss the operation of heavy-duty engines equipped with selective catalyst reduction (SCR). EPA will be reviewing its policies regarding the operation of SCR- equipped heavy-duty diesel engines without diesel exhaust fluid (DEF), with improper DEF, or when tampering (or some other defect in the SCR system) is detected.
The Coordinating Research Council (CRC) conducted an Air Quality Research Needs Workshop on February 9-10, 2016 at the Georgia Institute of Technology, in Atlanta, GA. The workshop brought together researchers from academia, government, and industry to brainstorm and prioritize ...
Effective Technology for Recycling Metal. Proceedings of Two Special Workshops.
ERIC Educational Resources Information Center
National Association of Secondary Material Industries, Inc., New York, NY.
The National Association of Secondary Material Industries (NASMI) and the Bureau of Mines have cooperated to sponsor two technically-oriented workshops related to the role of metals recycling and air pollution control technology. The proceedings of these workshops, "Effective Technology and Research for Scrap Metal Recycling" and "Air Pollution…
Air-Based Remediation Workshop - Section 4 In Situ Air Sparging
Pursuant to the EPA-AIT Implementing Arrangement 7 for Technical Environmental Collaboration, Activity 11 "Remediation of Contaminated Sites," the USEPA Office of International Affairs Organized a Forced Air Remediation Workshop in Taipei to deliver expert training to the Environ...
Overview of NASA Glenn Seal Project
NASA Technical Reports Server (NTRS)
Steinetz, Bruce M.
2007-01-01
NASA Glenn hosted the Seals/Secondary Air System Workshop on November 14-15, 2006. At this workshop NASA and our industry and university partners shared their respective seal technology developments. We use these workshops as a technical forum to exchange recent advancements and "lessons-learned" in advancing seal technology and solving problems of common interest. As in the past we are publishing the presentations from this workshop in two volumes. Volume I will be publicly available and individual papers will be made available on-line through the web page address listed at the end of this presentation. Volume II will be restricted as Sensitive But Unclassified (SBU) under International Traffic and Arms Regulations (ITAR).
Air-Based Remediation Workshop - Section 7 Sustainable Remediation And Air-Based Technologies
Pursuant to the EPA-AIT Implementing Arrangement 7 for Technical Environmental Collaboration, Activity 11 "Remediation of Contaminated Sites, " the USEPA Office of International Affairs Organized a Forced Air Remediation Workshop in Taipei to deliver expert training to the Enviro...
Air-Based Remediation Workshop - Section 8 Air-Based Remediation Technology Selection Logic
Pursuant to the EPA-AIT Implementing Arrangement 7 for Technical Environmental Collaboration, Activity 11 "Remediation of Contaminated Sites," the USEPA Office of International Affairs Organized a Forced Air Remediation Workshop in Taipei to deliver expert training to the Environ...
2002 NASA Seal/Secondary Air System Workshop. Volume 1
NASA Technical Reports Server (NTRS)
Steinetz, Bruce M. (Editor); Hendricks, Robert C. (Editor)
2003-01-01
The 2002 NASA Seal/Secondary Air System Workshop covered the following topics: (i) Overview of NASA s perspective of aeronautics and space technology for the 21st century; (ii) Overview of the NASA-sponsored Ultra-Efficient Engine Technology (UEET), Turbine-Based Combined-Cycle (TBCC), and Revolutionary Turbine Accelator (RTA) programs; (iii) Overview of NASA Glenn's seal program aimed at developing advanced seals for NASA's turbomachinery, space propulsion, and reentry vehicle needs; (iv) Reviews of sealing concepts, test results, experimental facilities, and numerical predictions; and (v) Reviews of material development programs relevant to advanced seals development. The NASA UEET and TBCC/RTA program overviews illustrated for the reader the importance of advanced technologies, including seals, in meeting future turbine engine system efficiency and emission goals. For example, the NASA UEET program goals include an 8- to 15-percent reduction in fuel burn, a 15-percent reduction in CO2, a 70-percent reduction in NOx, CO, and unburned hydrocarbons, and a 30-dB noise reduction relative to program baselines. The workshop also covered several programs NASA is funding to investigate advanced reusable space vehicle technologies (X-38) and advanced space ram/scramjet propulsion systems. Seal challenges posed by these advanced systems include high-temperature operation, resiliency at the operating temperature to accommodate sidewall flexing, and durability to last many missions.
2010-03-01
FINAL ENVIRONMENTAL ASSESSMENT ADDRESSING CONSTRUCTION OF A NEW CIVIL ENGINEERING WORKSHOP AT BELLOWS AIR FORCE STATION , O‘AHU, HAWAI‘I...Minimize impacts on other Bellows AFS functions and environmental resources This alternative would be located in an area located near Building 546 and...Preparation of An Environmental Assessment for the Proposed Construction of New Civil Engineering Workshop at Bellows Air !Force Station Thank you
Standing Sound Waves in Air with DataStudio
ERIC Educational Resources Information Center
Kraftmakher, Yaakov
2010-01-01
Two experiments related to standing sound waves in air are adapted for using the ScienceWorkshop data-acquisition system with the DataStudio software from PASCO scientific. First, the standing waves are created by reflection from a plane reflector. The distribution of the sound pressure along the standing wave is measured. Second, the resonance…
DOT National Transportation Integrated Search
2008-10-01
According to Section 808 of the National Parks Air Tour Management Act of 2000, any methodology : adopted by a Federal agency to assess air tour noise in any unit of the national park system shall be : based on reasonable scientific methods. Therefor...
NASA Technical Reports Server (NTRS)
Benedetti, Angela; Reid, Jeffrey S.; Colarco, Peter R.
2011-01-01
The purpose of this workshop was to reinforce the working partnership between centers who are actively involved in global aerosol forecasting, and to discuss issues related to forecast verification. Participants included representatives from operational centers with global aerosol forecasting requirements, a panel of experts on Numerical Weather Prediction and Air Quality forecast verification, data providers, and several observers from the research community. The presentations centered on a review of current NWP and AQ practices with subsequent discussion focused on the challenges in defining appropriate verification measures for the next generation of aerosol forecast systems.
Preface: Workshop on Off-Grid Technology Systems
NASA Astrophysics Data System (ADS)
Alonso-Marroquin, Fernando
2017-06-01
Off-grid houses are dwellings that do not rely on water supply, sewer, or electrical power grid, and are able to operate independently of all public utility services. These houses are ideal for remote communities or population suffering natural or human-made disasters. Our aim is to develop compact and affordable off-grid technologies by integrating high-end nano-engineering with systems that imitates natural biological processes. The key areas of focus in the workshop were: solar energy harvesting using nanotechnology, wind energy harvesting from vertical-axis wind turbines, supercapacitors energy storage systems, treatment of greywater, and green roofs to achieve air comfort.
Pursant to the EPA-AIT Implementing Arrangement 7 for Technical Environmental Collaboration, Activity 11 "Remediation of Contaminated Sites," the USEPA Office of International Affairs Organized a Force Air Remediation Workshop in Taipei to deliver expert training to the Environme...
Findings from the 2013 EPA Air Sensors Workshop
This article, first published in the January 2014 issue of EM Magazine, provides findings from the Air Sensors 2013: Data Quality & Applications workshop held in Research Triangle Park, N.C., in March 2013.
Third Annual Workshop on Space Operations Automation and Robotics (SOAR 1989)
NASA Technical Reports Server (NTRS)
Griffin, Sandy (Editor)
1990-01-01
Papers presented at the Third Annual Workshop on Space Operations Automation and Robotics (SOAR '89), hosted by the NASA Lyndon B. Johnson Space Center at Houston, Texas, on July 25 to 27, 1989, are given. Approximately 100 technical papers were presented by experts from NASA, the USAF, universities, and technical companies. Also held were panel discussions on Air Force/NASA Artificial Intelligence Overview and Expert System Verification and Validation.
73. TORPEDO WORK SHOP FORWARD LOOKING AFT SHOWING TORPEDO ...
73. TORPEDO WORK SHOP - FORWARD LOOKING AFT SHOWING TORPEDO ELEVATOR, HIGH PRESSURE AIR REDUCING STATION, SCUTTLEBUTT, TORPEDO AFTERBODY WORKSHOP, OVERHEAD CHAIN MOIST AND RAIL SYSTEM AND OVERHEAD SPRINKLER SYSTEM. - U.S.S. HORNET, Puget Sound Naval Shipyard, Sinclair Inlet, Bremerton, Kitsap County, WA
2003 NASA Seal/Secondary Air System Workshop. Volume 1
NASA Technical Reports Server (NTRS)
Steinetz, Bruce M. (Editor); Hendricks, Robert C. (Editor)
2004-01-01
The following reports were included in the 2003 NASA Seal/Secondary Air System Workshop:Low Emissions Alternative Power (LEAP); Overview of NASA Glenn Seal Developments; NASA Ultra Efficient Engine Technology Project Overview; Development of Higher Temperature Abradable Seals for Industrial Gas Turbines; High Misalignment Carbon Seals for the Fan Drive Gear System Technologies; Compliant Foil Seal Investigations; Test Rig for Evaluating Active Turbine Blade Tip Clearance Control Concepts; Controls Considerations for Turbine Active Clearance Control; Non-Contacting Finger Seal Developments and Design Considerations; Effect of Flow-Induced Radial Load on Brush Seal/Rotor Contact Mechanics; Seal Developments at Flowserve Corporation; Investigations of High Pressure Acoustic Waves in Resonators With Seal-Like Features; Numerical Investigations of High Pressure Acoustic Waves in Resonators; Feltmetal Seal Material Through-Flow; "Bimodal" Nuclear Thermal Rocket (BNTR) Propulsion for Future Human Mars Exploration Missions; High Temperature Propulsion System Structural Seals for Future Space Launch Vehicles; Advanced Control Surface Seal Development for Future Space Vehicles; High Temperature Metallic Seal Development for Aero Propulsion and Gas Turbine Applications; and BrazeFoil Honeycomb.
Comparison of Engine Cycle Codes for Rocket-Based Combined Cycle Engines
NASA Technical Reports Server (NTRS)
Waltrup, Paul J.; Auslender, Aaron H.; Bradford, John E.; Carreiro, Louis R.; Gettinger, Christopher; Komar, D. R.; McDonald, J.; Snyder, Christopher A.
2002-01-01
This paper summarizes the results from a one day workshop on Rocket-Based Combined Cycle (RBCC) Engine Cycle Codes held in Monterey CA in November of 2000 at the 2000 JANNAF JPM with the authors as primary participants. The objectives of the workshop were to discuss and compare the merits of existing Rocket-Based Combined Cycle (RBCC) engine cycle codes being used by government and industry to predict RBCC engine performance and interpret experimental results. These merits included physical and chemical modeling, accuracy and user friendliness. The ultimate purpose of the workshop was to identify the best codes for analyzing RBCC engines and to document any potential shortcomings, not to demonstrate the merits or deficiencies of any particular engine design. Five cases representative of the operating regimes of typical RBCC engines were used as the basis of these comparisons. These included Mach 0 sea level static and Mach 1.0 and Mach 2.5 Air-Augmented-Rocket (AAR), Mach 4 subsonic combustion ramjet or dual-mode scramjet, and Mach 8 scramjet operating modes. Specification of a generic RBCC engine geometry and concomitant component operating efficiencies, bypass ratios, fuel/oxidizer/air equivalence ratios and flight dynamic pressures were provided. The engine included an air inlet, isolator duct, axial rocket motor/injector, axial wall fuel injectors, diverging combustor, and exit nozzle. Gaseous hydrogen was used as the fuel with the rocket portion of the system using a gaseous H2/O2 propellant system to avoid cryogenic issues. The results of the workshop, even after post-workshop adjudication of differences, were surprising. They showed that the codes predicted essentially the same performance at the Mach 0 and I conditions, but progressively diverged from a common value (for example, for fuel specific impulse, Isp) as the flight Mach number increased, with the largest differences at Mach 8. The example cases and results are compared and discussed in this paper.
ERIC Educational Resources Information Center
Journal of Aerospace Education, 1977
1977-01-01
Reviews a leadership development aerospace educators workshop held at Maxwell Air Force Base, Alabama, July 22, 1977, and an introductory/advanced aerospace workshop held at Central Washington State College. (SL)
Workshop on Agricultural Air Quality: State of the science
NASA Astrophysics Data System (ADS)
Aneja, Viney P.; Blunden, Jessica; Roelle, Paul A.; Schlesinger, William H.; Knighton, Raymond; Niyogi, Dev; Gilliam, Wendell; Jennings, Greg; Duke, Clifford S.
The first Workshop on Agricultural Air Quality: State of the Science was held at the Bolger Center in Potomac, Maryland from 4 to 8 June 2006. This international conference assembled approximately 350 people representing 25 nations from 5 continents, with disciplines ranging from atmospheric chemistry to soil science. The workshop was designed as an open forum in which participants could openly exchange the most current knowledge and learn about numerous international perspectives regarding agricultural air quality. Participants represented many stakeholder groups concerned with the growing need to assess agricultural impacts on the atmosphere and to develop beneficial policies to improve air quality. The workshop focused on identifying methods to improve emissions inventories and best management practices for agriculture. Workshop participants also made recommendations for technological and methodological improvements in current emissions measurement and modeling practices. The workshop commenced with a session on agricultural emissions and was followed by international perspectives from the United States, Europe, Australia, India, and South America. This paper summarizes the findings and issues of the workshop and articulates future research needs. These needs were identified in three general areas: (1) improvement of emissions measurement; (2) development of appropriate emission factors; and (3) implementation of best management practices (BMPs) to minimize negative environmental impacts. Improvements in the appropriate measurements will inform decisions regarding US farming practices. A need was demonstrated for a national/international network to monitor atmospheric emissions from agriculture and their subsequent depositions to surrounding areas. Information collected through such a program may be used to assess model performance and could be critical for evaluating any future regulatory policies or BMPs. The workshop concluded that efforts to maximize benefits and reduce detrimental effects of agricultural production need to transcend disciplinary, geographic, and political boundaries. Also, such efforts should involve natural and social scientists, economists, engineers, business leaders, and decision makers. The workshop came to the conclusion that through these collaborative efforts improvements in air quality from agricultural practices will begin to take effect.
Report of the proceedings of the Colloquium and Workshop on Multiscale Coupled Modeling
NASA Technical Reports Server (NTRS)
Koch, Steven E. (Editor)
1993-01-01
The Colloquium and Workshop on Multiscale Coupled Modeling was held for the purpose of addressing modeling issues of importance to planning for the Cooperative Multiscale Experiment (CME). The colloquium presentations attempted to assess the current ability of numerical models to accurately simulate the development and evolution of mesoscale cloud and precipitation systems and their cycling of water substance, energy, and trace species. The primary purpose of the workshop was to make specific recommendations for the improvement of mesoscale models prior to the CME, their coupling with cloud, cumulus ensemble, hydrology, air chemistry models, and the observational requirements to initialize and verify these models.
Bringing hands-on exploration of air quality technology to the ...
This is an educational presentation to the OAQPS Teachers Workshop on the PM sensor kit and other related air technology educational activities. This workshop for teachers and other educators includes topics, such as: how EPA manages air quality, the environmental health effects and risks of air pollution, climate change, and sustainability solutions and more. Attendees will also build a DYI Sensor kit and explore energy choices and the environment when they play the interactive board game developed by EPA scientists called Generate! This workshop for teachers and other educators includes topics, such as: how EPA manages air quality, the environmental health effects and risks of air pollution, climate change and sustainability and more. Attendees will also build a DYI Sensor kit and explore energy choices and the environment when they play the interactive board game developed by EPA scientists called Generate!
Air-Base Remediation Workshop - Section 3 Bioventig
Pursuant to the EPA-AIT Implementing Arrangement 7 for Technical Environmental Collaboration, Activity 11 "Remediation of Contaminated Sites," the USEPA Office of International Affairs Organized a Forced Air Remediation Workshop in Taipei to deliver expert training to the Environ...
Low-Cost Air Quality Monitoring Tools: From Research to Practice (A Workshop Summary)
Griswold, William G.; RS, Abhijit; Johnston, Jill E.; Herting, Megan M.; Thorson, Jacob; Collier-Oxandale, Ashley; Hannigan, Michael
2017-01-01
In May 2017, a two-day workshop was held in Los Angeles (California, U.S.A.) to gather practitioners who work with low-cost sensors used to make air quality measurements. The community of practice included individuals from academia, industry, non-profit groups, community-based organizations, and regulatory agencies. The group gathered to share knowledge developed from a variety of pilot projects in hopes of advancing the collective knowledge about how best to use low-cost air quality sensors. Panel discussion topics included: (1) best practices for deployment and calibration of low-cost sensor systems, (2) data standardization efforts and database design, (3) advances in sensor calibration, data management, and data analysis and visualization, and (4) lessons learned from research/community partnerships to encourage purposeful use of sensors and create change/action. Panel discussions summarized knowledge advances and project successes while also highlighting the questions, unresolved issues, and technological limitations that still remain within the low-cost air quality sensor arena. PMID:29143775
Applying Knowledge-Based Methods to Design and Implement an Air Quality Workshop
Daniel L. Schmoldt; David L. Peterson
1991-01-01
In response to protection needs in class I wilderness areas, forest land managers of the USDA Forest Service must provide input to regulatory agencies regarding air pollutant impacts on air quality-related values. Regional workshops have been convened for land managers and scientists to discuss the aspects and extent of wilderness protection needs. Previous experience...
ERIC Educational Resources Information Center
Samsudin, Mohd Wahid; Daik, Rusli; Abas, Azlan; Meerah, T. Subahan Mohd; Halim, Lilia
2013-01-01
In this study, the learning of science outside the classroom is believe to be an added value to science learning as well as it offers students to interact with the environment. This study presents data obtained from two days' workshop on Lichen as Biological Indicator for Air Quality. The aim of the workshop is for the students to gain an…
1992-12-01
Revolution," ONLINE (1989 July):75. 6. Ibid., 76. 7. Ibid., 77. 17 HYPERMEDIA: INTERFACING IN THE INFORMATION AGE J . Wesley Regian Air Force Human...Resources Laboratory (AFSC) Brooks Air Force Base, Texas 19 HYPERMEDIA: INTERFACING IN THE INFORMATION AGE J . Wesley Regian Air Force Human Resources...AUTOMATION SYSTEM DISTRIBUTED INFORMATION ACCESS: RETRIEVAL DATABASE INTERFACE MANAGEMENT James J . Young, President Ann R Tinker Sirsi Corporation Huntsville
Air-Based Remediation Workshop - Section 2 Soil Vapor Extraction
Pursuant to the EPA-AIT Implementing Arrangement 7 for Technical Environmental Collaboration, Activity 11 "Remediation of Contaminated Sties," the USEPA Office of International Affairs Organized a Forced Air Remediation Workshop in Taipei to deliver expert training to the Environ...
Agenda and Presentations from Circumpolar Workshop: Transport and Clean Air
EPA and its partners convened Transport and Clean Air, a Circumpolar Workshop held in December 2013. This seminar allowed leading experts to share best practices on reducing emissions of particulates and black carbon from diesel sources in the Arctic.
1999 NASA Seal/Secondary Air System Workshop
NASA Technical Reports Server (NTRS)
Steinetz, Bruce M.; Hendricks, Robert C.
2000-01-01
NASA Glenn hosted the Seals/Secondary Air System Workshop on October 2829, 1999. Each year NASA and our industry and university partners share their respective seal technology development. We use these workshops as a technical forum to exchange recent advancements and "lessons-learned" in advancing seal technology and solving problems of common interest. As in the past we are publishing two volumes. Volume 1 will be publicly available and will be made available on-line through the web page address listed at the end of this chapter. Volume 2 will be restricted under International Traffic and Arms Regulations (I.T.A.R.) In this conference participants gained an appreciation of NASA's new Ultra Efficient Engine Technology (UEET) program and how this program will be partnering with ongoing DOE -industrial power production and DOD- military aircraft engine programs. In addition to gaining a deeper understanding into sealing advancements and challenges that lie ahead, participants gained new working and personal relationships with the attendees. When the seals and secondary fluid management program was initiated, the emphasis was on rocket engines with spinoffs to gas turbines. Today, the opposite is true and we are, again building our involvement in the rocket engine and space vehicle demonstration programs.
Proceedings: Third Annual Workshop on Meteorological and Environmental Inputs to Aviation Systems
NASA Technical Reports Server (NTRS)
Camp, D. W. (Editor); Frost, W. (Editor)
1979-01-01
The proceedings of a workshop on meteorological and environmental inputs to aviation systems are reported. The major objectives of the workshop are to satisfy such needs of the sponsoring agencies as the expansion of our understanding and knowledge of the interaction of the atmosphere with aviation systems, the better definition and implementation of services to operators, and the collection and interpretation of data for establishing operational criteria, relating the total meteorological inputs from the atmospheric sciences to the needs of aviation communities. The unique aspect of the workshop was the achievement of communication across the interface of the boundaries between pilots, meteorologists, training personnel, accident investigators, traffic controllers, flight operation personnel from military, civil, general aviation, and commercial interests alike. Representatives were in attendance from government, airlines, private agencies, aircraft manufacturers, Department of Defense, industries, research institutes, and universities. Full-length papers addressed the topics of training, flight operations, accident investigation, air traffic control, and airports. Winds and wind shear; icing and frost; atmospheric electricity and lightning; fog, visibility and ceilings; and turbulence were discussed.
2005 NASA Seal/Secondary Air System Workshop, Volume 1
NASA Technical Reports Server (NTRS)
Steinetz, Bruce M. (Editor); Hendricks, Robert C. (Editor)
2006-01-01
The 2005 NASA Seal/Secondary Air System workshop covered the following topics: (i) Overview of NASA s new Exploration Initiative program aimed at exploring the Moon, Mars, and beyond; (ii) Overview of the NASA-sponsored Propulsion 21 Project; (iii) Overview of NASA Glenn s seal project aimed at developing advanced seals for NASA s turbomachinery, space, and reentry vehicle needs; (iv) Reviews of NASA prime contractor, vendor, and university advanced sealing concepts including tip clearance control, test results, experimental facilities, and numerical predictions; and (v) Reviews of material development programs relevant to advanced seals development. Turbine engine studies have shown that reducing high-pressure turbine (HPT) blade tip clearances will reduce fuel burn, lower emissions, retain exhaust gas temperature margin, and increase range. Several organizations presented development efforts aimed at developing faster clearance control systems and associated technology to meet future engine needs. The workshop also covered several programs NASA is funding to develop technologies for the Exploration Initiative and advanced reusable space vehicle technologies. NASA plans on developing an advanced docking and berthing system that would permit any vehicle to dock to any on-orbit station or vehicle. Seal technical challenges (including space environments, temperature variation, and seal-on-seal operation) as well as plans to develop the necessary "androgynous" seal technologies were reviewed. Researchers also reviewed tests completed for the shuttle main landing gear door seals.
Air-Based Remediation Workshop - Section 5 Multi-Phase Extraction And Product Recovery
Pursuant to the EPA-AIT Implementing Arrangement 7 for Technical Environmental Collaboration, Activity 11 "Remediation of Contaminated Sites," the USEPA Office of International Affairs Organized a Forced Air Remediation Workshop in Taipei to deliver expert training to the Environ...
Materials from April 2010 Mexico Workshop on Reducing Air Pollution from Ships
As part of a U.S.-Mexico Fuel Switching Demonstration, EPA and SEMARNAT jointly sponsored a workshop entitled “Reducing Air Pollution from Ships: Fuel Switching Demonstration in the Gulf of Mexico,” Veracruz, Mexico, April 16, 2010.
DOT National Transportation Integrated Search
2015-04-01
This implementation project supports streamlined project delivery, one of the goals outlined by the Texas : Department of Transportation (TxDOT) leadership to achieve an efficient and effective transportation system : in Texas. The project benefits T...
Experimental evaluation of the Skylab orbital workshop ventilation system concept
NASA Technical Reports Server (NTRS)
Allums, S. L.; Hastings, L. J.; Ralston, J. T.
1972-01-01
Extensive testing was conducted to evaluate the Orbital Workshop ventilation concept. Component tests were utilized to determine the relationship between operating characteristics at 1 and 0.34 atm. System tests were conducted at 1 atm within the Orbital Workshop full-scale mockup to assess delivered volumetric flow rate and compartment air velocities. Component tests with the Anemostat circular diffusers (plenum- and duct-mounted) demonstrated that the diffuser produced essentially equivalent airflow patterns and velocities in 1- and 0.34-atm environments. The tests also showed that the pressure drop across the diffuser could be scaled from 1 to 0.34 atm using the atmosphere pressure ratio. Fan tests indicated that the performance of a multiple, parallel-mounted fan cluster could be predicted by summing the single-fan flow rates at a given delta P.
DOT National Transportation Integrated Search
1977-12-01
Four workshops on transportation-air quality research needs were sponsored in the Spring of 1977 by the U.S. Department of Transportation (USDOT) to identify the requirements for a research and development program. One hundred and sixty six persons a...
Workshop on Solar Electric Propulsion
NASA Technical Reports Server (NTRS)
Bents, David; Marvin, Dean
1993-01-01
A summary of the discussion at the workshop on solar electric propulsion (SEP) is presented. The purpose of ELITE SEP flight experiment is to demonstrate operation of solar array powered electric thrusters for raising spacecraft from parking orbit to higher altitudes, leading to definition of an operational SEP orbit transfer vehicles (OTV) for Air Force missions. Many of the problems or potential problems that may be associated with SEP are not well understood nor clearly identified, and system level phenomena such as interaction of thruster plume with the solar arrays cannot be simulated in a ground test. Therefore, an end-to-end system flight test is required to demonstrate solar electric propulsion.
Workshop on Solar Electric Propulsion
NASA Astrophysics Data System (ADS)
Bents, David; Marvin, Dean
1993-05-01
A summary of the discussion at the workshop on solar electric propulsion (SEP) is presented. The purpose of ELITE SEP flight experiment is to demonstrate operation of solar array powered electric thrusters for raising spacecraft from parking orbit to higher altitudes, leading to definition of an operational SEP orbit transfer vehicles (OTV) for Air Force missions. Many of the problems or potential problems that may be associated with SEP are not well understood nor clearly identified, and system level phenomena such as interaction of thruster plume with the solar arrays cannot be simulated in a ground test. Therefore, an end-to-end system flight test is required to demonstrate solar electric propulsion.
Air sampling workshop: October 24-25, 1978
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1979-06-01
A two-day workshop was held in October 1978 on air sampling strategies for the occupational environment. Strategies comprise the elements of implementing an air sampling program including deciding on the extent of sampling, selecting appropriate types of measurement, placing sampling instruments properly, and interpreting sample results correctly. All of these elements are vital in the reliable assessment of occupational exposures yet their coverage in the industrial hygiene literature is meager. Although keyed to a few introductory topics, the agenda was sufficiently informal to accommodate extemporaneous discussion on any subject related to sampling strategies. Questions raised during the workshop mirror themore » status of air sampling strategy as much as the factual information that was presented. It may be concluded from the discussion and questions that air sampling strategy is an elementary state and urgently needs concerted attention from the industrial hygiene profession.« less
Low-Cost Air Quality Monitoring Tools: From Research to Practice (A Workshop Summary)
In May 2017, a two-day workshop was held in Los Angeles (California, U.S.A.) to gather practitioners who work with low-cost sensors used to make air quality measurements. The community of practice included individuals from academia, industry, non-profit groups, community-based or...
AIR QUALITY CRITERIA FOR PARTICULATE MATTER DOCUMENT
A Planning Document was produced by NCEA/RTP and reviewed by the Clean Air Scientific Advisory Committee (CASAC) (62 FR 55201, October 23, 1997). In FY99, a workshop draft of the PM AQCD was completed, a peer input workshop held, and an External Review Draft released for public ...
This talk supports the NGAM workshop and webinar seires and prepares for NGAM 2 The Next Generation Air Monitoring (NGAM) webinar and workshop series captures the revolution in air pollution measurement science enabled by rapid advances in sensors, communication...
Expert consensus on an in vitro approach to assess ...
Report from an international workshop with the goal of reviewing the state-of-the-science and determine the technical needs to develop an in vitro system that will reduce and eventually replace the use of animals for evaluating the potential inhalation toxicity of nanomaterials (NMs) in a regulatory setting. Workshop was co-organized in February 2015 by the PETA International Science Consortium Ltd. with the National Toxicology Program Interagency Center for the Evaluation of Alternative Toxicological Methods an international workshop that was attended by representatives from industry, government, academia, and non-governmental organizations with expertise in in vivo and in vitro lung systems, respiratory toxicology, inhalation particle dosimetry, nanotoxicology, and hazard and human health risk analysis. This report provides an overview of the presentations, discussions, and recommendations of the participants on the design of an in vitro system for the prediction of pulmonary fibrosis. The workshop participants identified multi-walled carbon nanotubes (MWCNTs), which have been shown to induce fibrosis in animal experiments and represent an important commercial nanomaterial class, as representative pro-fibrogenic NMs to use for the development of an in vitro test system. Recommendations were made for designing a system using lung relevant cells co-cultured at the air-liquid interface to assess the pro-fibrogenic potential of aerosolized MWCNTs, while consider
2006 NASA Seal/Secondary Air System Workshop; Volume 1
NASA Technical Reports Server (NTRS)
Steinetz, Bruce, M. (Editor); Hendricks, Robert C. (Editor); Delgado, Irebert (Editor)
2007-01-01
The 2006 NASA Seal/Secondary Air System workshop covered the following topics: (i) Overview of NASA s new Exploration Initiative program aimed at exploring the Moon, Mars, and beyond; (ii) Overview of NASA s new fundamental aeronautics technology project; (iii) Overview of NASA Glenn Research Center s seal project aimed at developing advanced seals for NASA s turbomachinery, space, and reentry vehicle needs; (iv) Reviews of NASA prime contractor, vendor, and university advanced sealing concepts including tip clearance control, test results, experimental facilities, and numerical predictions; and (v) Reviews of material development programs relevant to advanced seals development. Turbine engine studies have shown that reducing seal leakages as well as high-pressure turbine (HPT) blade tip clearances will reduce fuel burn, lower emissions, retain exhaust gas temperature margin, and increase range. Several organizations presented development efforts aimed at developing faster clearance control systems and associated technology to meet future engine needs. The workshop also covered several programs NASA is funding to develop technologies for the Exploration Initiative and advanced reusable space vehicle technologies. NASA plans on developing an advanced docking and berthing system that would permit any vehicle to dock to any on-orbit station or vehicle. Seal technical challenges (including space environments, temperature variation, and seal-on-seal operation) as well as plans to develop the necessary "androgynous" seal technologies were reviewed. Researchers also reviewed seal technologies employed by the Apollo command module that serve as an excellent basis for seals for NASA s new Crew Exploration Vehicle (CEV).
Giles, Luisa V.; Barn, Prabjit; Künzli, Nino; Romieu, Isabelle; Mittleman, Murray A.; van Eeden, Stephan; Allen, Ryan; Carlsten, Chris; Stieb, Dave; Noonan, Curtis; Smargiassi, Audrey; Kaufman, Joel D.; Hajat, Shakoor; Kosatsky, Tom; Brauer, Michael
2011-01-01
Background Associations between air pollution and a multitude of health effects are now well established. Given ubiquitous exposure to some level of air pollution, the attributable health burden can be high, particularly for susceptible populations. Objectives An international multidisciplinary workshop was convened to discuss evidence of the effectiveness of actions to reduce health impacts of air pollution at both the community and individual level. The overall aim was to summarize current knowledge regarding air pollution exposure and health impacts leading to public health recommendations. Discussion During the workshop, experts reviewed the biological mechanisms of action of air pollution in the initiation and progression of disease, as well as the state of the science regarding community and individual-level interventions. The workshop highlighted strategies to reduce individual baseline risk of conditions associated with increased susceptibility to the effects of air pollution and the need to better understand the role of exposure duration in disease progression, reversal, and adaptation. Conclusion We have identified two promising and largely unexplored strategies to address and mitigate air pollution–related health impacts: reducing individual baseline risk of cardiovascular disease and incorporating air pollution–related health impacts into land-use decisions. PMID:20729178
NASA Technical Reports Server (NTRS)
Hockaday, Stephen; Kuhlenschmidt, Sharon (Editor)
1991-01-01
The objective of the workshop was to explore the role of human factors in facilitating the introduction of artificial intelligence (AI) to advanced air traffic control (ATC) automation concepts. AI is an umbrella term which is continually expanding to cover a variety of techniques where machines are performing actions taken based upon dynamic, external stimuli. AI methods can be implemented using more traditional programming languages such as LISP or PROLOG, or they can be implemented using state-of-the-art techniques such as object-oriented programming, neural nets (hardware or software), and knowledge based expert systems. As this technology advances and as increasingly powerful computing platforms become available, the use of AI to enhance ATC systems can be realized. Substantial efforts along these lines are already being undertaken at the FAA Technical Center, NASA Ames Research Center, academic institutions, industry, and elsewhere. Although it is clear that the technology is ripe for bringing computer automation to ATC systems, the proper scope and role of automation are not at all apparent. The major concern is how to combine human controllers with computer technology. A wide spectrum of options exists, ranging from using automation only to provide extra tools to augment decision making by human controllers to turning over moment-by-moment control to automated systems and using humans as supervisors and system managers. Across this spectrum, it is now obvious that the difficulties that occur when tying human and automated systems together must be resolved so that automation can be introduced safely and effectively. The focus of the workshop was to further explore the role of injecting AI into ATC systems and to identify the human factors that need to be considered for successful application of the technology to present and future ATC systems.
2007 NASA Seal/Secondary Air System Workshop. Volume 1
NASA Technical Reports Server (NTRS)
Steinetz, Bruce M.; Hendricks, Robert C.; Delgado, Irebert
2008-01-01
The 2007 NASA Seal/Secondary Air System workshop covered the following topics: (i) Overview of NASA's new Orion project aimed at developing a new spacecraft that will fare astronauts to the International Space Station, the Moon, Mars, and beyond; (ii) Overview of NASA's fundamental aeronautics technology project; (iii) Overview of NASA Glenn s seal project aimed at developing advanced seals for NASA's turbomachinery, space, and reentry vehicle needs; (iv) Reviews of NASA prime contractor, vendor, and university advanced sealing concepts, test results, experimental facilities, and numerical predictions; and (v) Reviews of material development programs relevant to advanced seals development. Turbine engine studies have shown that reducing seal leakage as well as high-pressure turbine (HPT) blade tip clearances will reduce fuel burn, lower emissions, retain exhaust gas temperature margin, and increase range. Turbine seal development topics covered include a method for fast-acting HPT blade tip clearance control, noncontacting low-leakage seals, intershaft seals, and a review of engine seal performance requirements for current and future Army engine platforms.
2008 NASA Seal/Secondary Air System Workshop
NASA Technical Reports Server (NTRS)
Steinetz, Bruce M. (Editor); Hendricks, Robert C. (Editor); Delgado, Irebert R. (Editor)
2009-01-01
The 2008 NASA Seal/Secondary Air System Workshop covered the following topics: (i) Overview of NASA s new Orion project aimed at developing a new spacecraft that will fare astronauts to the International Space Station, the Moon, Mars, and beyond; (ii) Overview of NASA s fundamental aeronautics technology project; (iii) Overview of NASA Glenn s seal project aimed at developing advanced seals for NASA s turbomachinery, space, and reentry vehicle needs; (iv) Reviews of NASA prime contractor, vendor, and university advanced sealing concepts, test results, experimental facilities, and numerical predictions; and (v) Reviews of material development programs relevant to advanced seals development. Turbine engine studies have shown that reducing seal leakage as well as high-pressure turbine (HPT) blade tip clearances will reduce fuel burn, lower emissions, retain exhaust gas temperature margin, and increase range. Turbine seal development topics covered include a method for fast-acting HPT blade tip clearance control, noncontacting low-leakage seals, intershaft seals, and a review of engine seal performance requirements for current and future Army engine platforms.
Proceedings of the Sixth NASA Langley Formal Methods (LFM) Workshop
NASA Technical Reports Server (NTRS)
Rozier, Kristin Yvonne (Editor)
2008-01-01
Today's verification techniques are hard-pressed to scale with the ever-increasing complexity of safety critical systems. Within the field of aeronautics alone, we find the need for verification of algorithms for separation assurance, air traffic control, auto-pilot, Unmanned Aerial Vehicles (UAVs), adaptive avionics, automated decision authority, and much more. Recent advances in formal methods have made verifying more of these problems realistic. Thus we need to continually re-assess what we can solve now and identify the next barriers to overcome. Only through an exchange of ideas between theoreticians and practitioners from academia to industry can we extend formal methods for the verification of ever more challenging problem domains. This volume contains the extended abstracts of the talks presented at LFM 2008: The Sixth NASA Langley Formal Methods Workshop held on April 30 - May 2, 2008 in Newport News, Virginia, USA. The topics of interest that were listed in the call for abstracts were: advances in formal verification techniques; formal models of distributed computing; planning and scheduling; automated air traffic management; fault tolerance; hybrid systems/hybrid automata; embedded systems; safety critical applications; safety cases; accident/safety analysis.
Scenarios for the Future of Air Quality: Planning and Analysis in an Uncertain World
On November 15 and 16 of 2010, EPA hosted a workshop: The Future of Air Quality: Planning and Analysis in An Uncertain World in Chapel Hill, North Carolina. This workshop was an “outside-of-the-box” thinking exercise, where a small group of EPA staff and managers brainstormed o...
As part of the review of the air quality criteria for sulfur oxides (SOX) and primary (health-based) National Ambient Air Quality Standards (NAAQS) for sulfur dioxide (SO2), EPA is announcing a teleconference workshop to evaluate preliminary draft materials ...
Next-generation air measurement technologies | Science ...
This is a presentation at a workshop in Chicago on emerging air monitoring technologies, hosted by a local nonprofit. The audience is composed of a mixture of technical backgrounds. This presentation will be part of an opening panel and the goal is to give an overview of the state of science on emerging air sensor technology. This is a presentation at a workshop in Chicago on emerging air monitoring technologies, hosted by a local nonprofit. The audience is composed of a mixture of technical backgrounds. This presentation will be part of an opening panel and the goal is to give an overview of the state of science on emerging air sensor technology.
Computational Structures Technology for Airframes and Propulsion Systems
NASA Technical Reports Server (NTRS)
Noor, Ahmed K. (Compiler); Housner, Jerrold M. (Compiler); Starnes, James H., Jr. (Compiler); Hopkins, Dale A. (Compiler); Chamis, Christos C. (Compiler)
1992-01-01
This conference publication contains the presentations and discussions from the joint University of Virginia (UVA)/NASA Workshops. The presentations included NASA Headquarters perspectives on High Speed Civil Transport (HSCT), goals and objectives of the UVA Center for Computational Structures Technology (CST), NASA and Air Force CST activities, CST activities for airframes and propulsion systems in industry, and CST activities at Sandia National Laboratory.
NASA Technical Reports Server (NTRS)
Tishkoff, Julian M.; Drummond, J. Philip; Edwards, Tim; Nejad, Abdollah S.
1997-01-01
The Air Force Office of Scientific Research, the Air Force Wright Laboratory Aero Propulsion and Power Directorate, and the NASA Langley Research Center held a joint supersonic combustion workshop on 14-16 May 1996. The intent of this meeting was to: (1) examine the current state-of-the-art in hydrocarbon and/or hydrogen fueled scramjet research; (2) define the future direction and needs of basic research in support of scramjet technology; and (3) when appropriate, help transition basic research findings to solve the needs of developmental engineering programs in the area of supersonic combustion and fuels. A series of topical sessions were planned. Opening presentations were designed to focus and encourage group discussion and scientific exchange. The last half-day of the workshop was set aside for group discussion of the issues that were raised during the meeting for defining future research opportunities and directions. The following text attempts to summarize the discussions that took place at the workshop.
A Hemispheric Version of the Community Multiscale Air Quality (CMAQ) Modeling System
This invited presentation will be given at the 4th Biannual Western Modeling Workshop in the Plenary session on Global model development, evaluation, and new source attribution tools. We describe the development and application of the hemispheric version of the CMAQ to examine th...
Seals/Secondary Fluid Flows Workshop 1997; Volume I
NASA Technical Reports Server (NTRS)
Hendricks, Robert C. (Editor)
2006-01-01
The 1997 Conference provided discussions and data on (a) program overviews, (b) developments in seals and secondary air management systems, (c) interactive seals flows with secondary air or fluid flows and powerstream flows, (d) views of engine externals and limitations, (e) high speed engine research sealing needs and demands, and (f) a short course on engine design development margins. Sealing concepts discussed include, mechanical rim and cavity seals, leaf, finger, air/oil, rope, floating-brush, floating-T-buffer, and brush seals. Engine externals include all components of engine fluid systems, sensors and their support structures that lie within or project through the nacelle. The clean features of the nacelle belie the minefield of challenges and opportunities that lie within. Seals; Secondary air flows; Rotordynamics; Gas turbine; Aircraft; CFD; Testing; Turbomachinery
Federal Register 2010, 2011, 2012, 2013, 2014
2013-05-10
...-- Health Criteria (EPA 600/R-08/047F), published in September 2008. Interested parties are invited to... Air Scientific Advisory Committee (CASAC) panel for the SO 2 NAAQS health review. DATES: The workshop... public health or welfare, which may be expected from the presence of such pollutant in the ambient air...
2. View looking southeast at north and west facades of ...
2. View looking southeast at north and west facades of Test Stand 'D' workshop 4222/E-23, with Test Stand 'D' tower in background and tunnel access shed to the right. Equipment on 4222/E-23 roof is for air conditioning. - Jet Propulsion Laboratory Edwards Facility, Test Stand D, Workshop, Edwards Air Force Base, Boron, Kern County, CA
Trusted Silicon Stratus (TSS) Workshop
2011-02-01
business case for a proposed Infrastructure-as-a- Service (IaaS)/ Software -as-a- Service ( SaaS ) cloud architecture. User desires for innovative pricing and...Public Physically Unclonable Function PUF Physically Unclonable Function SaaS Software -as-a- Service SIP Semiconductor Intellectual Property SNL...WORKSHOP NIMBIS SERVICES INCORPORATED FEBRUARY 2011 FINAL TECHNICAL REPORT ROME, NY 13441 UNITED STATES AIR FORCE AIR FORCE
International Cooperative for Aerosol Prediction Workshop on Aerosol Forecast Verification
NASA Technical Reports Server (NTRS)
Benedetti, Angela; Reid, Jeffrey S.; Colarco, Peter R.
2011-01-01
The purpose of this workshop was to reinforce the working partnership between centers who are actively involved in global aerosol forecasting, and to discuss issues related to forecast verification. Participants included representatives from operational centers with global aerosol forecasting requirements, a panel of experts on Numerical Weather Prediction and Air Quality forecast verification, data providers, and several observers from the research community. The presentations centered on a review of current NWP and AQ practices with subsequent discussion focused on the challenges in defining appropriate verification measures for the next generation of aerosol forecast systems.
2004 NASA Seal/Secondary Air System Workshop, Volume 1
NASA Technical Reports Server (NTRS)
2005-01-01
The 2004 NASA Seal/Secondary Air System workshop covered the following topics: (1) Overview of NASA s new Exploration Initiative program aimed at exploring the Moon, Mars, and beyond; (2) Overview of the NASA-sponsored Ultra-Efficient Engine Technology (UEET) program; (3) Overview of NASA Glenn s seal program aimed at developing advanced seals for NASA s turbomachinery, space, and reentry vehicle needs; (4) Reviews of NASA prime contractor and university advanced sealing concepts including tip clearance control, test results, experimental facilities, and numerical predictions; and (5) Reviews of material development programs relevant to advanced seals development. The NASA UEET overview illustrated for the reader the importance of advanced technologies, including seals, in meeting future turbine engine system efficiency and emission goals. For example, the NASA UEET program goals include an 8- to 15-percent reduction in fuel burn, a 15-percent reduction in CO2, a 70-percent reduction in NOx, CO, and unburned hydrocarbons, and a 30-dB noise reduction relative to program baselines. The workshop also covered several programs NASA is funding to develop technologies for the Exploration Initiative and advanced reusable space vehicle technologies. NASA plans on developing an advanced docking and berthing system that would permit any vehicle to dock to any on-orbit station or vehicle, as part of NASA s new Exploration Initiative. Plans to develop the necessary mechanism and androgynous seal technologies were reviewed. Seal challenges posed by reusable re-entry space vehicles include high-temperature operation, resiliency at temperature to accommodate gap changes during operation, and durability to meet mission requirements.
Proceedings of the Air Transportation Management Workshop
NASA Technical Reports Server (NTRS)
Tobias, Leonard (Editor); Tashker, Michael G. (Editor); Boyle, Angela M. (Editor)
1995-01-01
The Air Transportation Management (ATM) Workshop was held 31 Jan. - 1 Feb. 1995 at NASA Ames Research Center. The purpose of the workshop was to develop an initial understanding of user concerns and requirements for future ATM capabilities and to initiate discussions of alternative means and technologies for achieving more effective ATM capabilities. The topics for the sessions were as follows: viewpoints of future ATM capabilities, user requirements, lessons learned, and technologies for ATM. In addition, two panel sessions discussed priorities for ATM, and potential contributions of NASA to ATM. The proceedings contain transcriptions of all sessions.
Report of Workshop on Traffic, Health, and Infrastructure Planning
White, Ronald H.; Spengler, John D.; Dilwali, Kumkum M.; Barry, Brenda E.; Samet, Jonathan M.
2009-01-01
Recent air pollutant measurement data document unique aspects of the air pollution mixture near roadways, and an expanding body of epidemiological data suggests increased risks for exacerbation of asthma and other respiratory diseases, premature mortality, and certain cancers and birth outcomes from air pollution exposures in populations residing in relatively close proximity to roadways. The Workshop on Traffic, Health, and Infrastructure Planning, held in February 2004, was convened to provide a forum for interdisciplinary discussion of motor vehicle emissions, exposures and potential health effects related to proximity to motor vehicle traffic. This report summarizes the workshop discussions and findings regarding the current science on this issue, identifies planning and policy issues related to localized motor vehicle emissions and health concerns, and provides recommendations for future research and policy directions. PMID:16983859
An assessment of lighter than air technology
NASA Technical Reports Server (NTRS)
Vittek, J. F., Jr. (Editor)
1975-01-01
The workshop on LTA is summarized. The history and background are reviewed. The workshop reports for the following working groups are presented: policy, market analysis, economics, operations, and technology.
Crisis Relocation Workshops for Transportation Industry Representatives
1979-12-01
executive, two National Guard members, one Air Force transporta- _a ,tion representative, two Red Cross representatives, one school bus z coordinators...manaaers, local transitCD operator, and miiltary busingA authorityA Local Governa-ient 2 Fire chief, assistantI Air Force 3 Liaison Support D CPA :z...to attend the workshop. Majur trans- portation problems anticipated during crisis relocation include: 1. Transportation of carless residents; 2. The
NASA Technical Reports Server (NTRS)
DellaCorte, Chris; Pinkus, Oscar
2000-01-01
The following report represents a compendium of selected speaker presentation materials and observations made by Prof O. Pinkus at the NASA/ASME/Industry sponsored workshop entitled "Tribological Limitations in Gas Turbine Engines" held on September 15-17, 1999 in Albany, New York. The impetus for the workshop came from the ASME's Research Committee on Tribology whose goal is to explore new tribological research topics which may become future research opportunities. Since this subject is of current interest to other industrial and government entities the conference received cosponsorship as noted above. The conference was well attended by government, industrial and academic participants. Topics discussed included current tribological issues in gas turbines as well as the potential impact (drawbacks and advantages) of future tribological technologies especially foil air bearings and magnetic beatings. It is hoped that this workshop report may serve as a starting point for continued discussions and activities in oil-free turbomachinery systems.
NASA Technical Reports Server (NTRS)
DellaCorte, Chris; Pinkus, Oscar
2002-01-01
The following report represents a compendium of selected speaker presentation materials and observations made by Prof. O. Pinkus at the NASA/ASME/Industry sponsored workshop entitled "Tribological Limitations in Gas Turbine Engines" held on September 15-17, 1999 in Albany, New York. The impetus for the workshop came from the ASME's Research Committee on tribology whose goal is to explore new tribological research topics which may become future research opportunities. Since this subject is of current interest to other industrial and government entities the conference received cosponsorship as noted above. The conference was well attended by government, industrial, and academic participants. Topics discussed included current tribological issues in gas turbines as well as the potential impact (drawbacks and advantages) of future tribological technologies especially foil air bearings and magnetic bearings. It is hoped that this workshop report may serve as a starting point for continued discussions and activities in oil-free turbomachinery systems.
Computational Modeling of Tires
NASA Technical Reports Server (NTRS)
Noor, Ahmed K. (Compiler); Tanner, John A. (Compiler)
1995-01-01
This document contains presentations and discussions from the joint UVA/NASA Workshop on Computational Modeling of Tires. The workshop attendees represented NASA, the Army and Air force, tire companies, commercial software developers, and academia. The workshop objectives were to assess the state of technology in the computational modeling of tires and to provide guidelines for future research.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hoekman, S. Kent; Broch, Broch; Robbins, Curtis
The primary objective of this project was to utilize a flexible, energy-efficient facility, called the DRI Renewable Energy Experimental Facility (REEF) to support various renewable energy research and development (R&D) efforts, along with education and outreach activities. The REEF itself consists of two separate buildings: (1) a 1200-ft2 off-grid capable house and (2) a 600-ft2 workshop/garage to support larger-scale experimental work. Numerous enhancements were made to DRI's existing renewable power generation systems, and several additional components were incorporated to support operation of the REEF House. The power demands of this house are satisfied by integrating and controlling PV arrays, solarmore » thermal systems, wind turbines, an electrolyzer for renewable hydrogen production, a gaseous-fuel internal combustion engine/generator set, and other components. Cooling needs of the REEF House are satisfied by an absorption chiller, driven by solar thermal collectors. The REEF Workshop includes a unique, solar air collector system that is integrated into the roof structure. This system provides space heating inside the Workshop, as well as a hot water supply. The Workshop houses a custom-designed process development unit (PDU) that is used to convert woody biomass into a friable, hydrophobic char that has physical and chemical properties similar to low grade coal. Besides providing sufficient space for operation of this PDU, the REEF Workshop supplies hot water that is used in the biomass treatment process. The DRI-REEF serves as a working laboratory for evaluating and optimizing the performance of renewable energy components within an integrated, residential-like setting. The modular nature of the system allows for exploring alternative configurations and control strategies. This experimental test bed is also highly valuable as an education and outreach tool both in providing an infrastructure for student research projects, and in highlighting renewable energy features to the public.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Baer, Donald R.; Finlayson-Pitts, Barbara J.; Allen, Heather C.
2013-07-01
This report contains the workshop scope and recommendations from the workshop attendees in identifying scientific gaps in new particle formation, growth and properties of particles and reactions in and on particles as well as the laboratory-focused capabilities, field-deployable capabilities and modeling/theory tools along with linking of models to fundamental data.
Refrigeration and air-conditioning technology workshop
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lewis, P. J.; Counce, D. M.
1993-01-01
The Alternative Fluorocarbon Environmental Acceptability Study (AFEAS), a consortium of fluorocarbon manufacturers, and the US Department of Energy (DOE) are collaborating on a project to evaluate the energy use and global warming impacts of CFC alternatives. The goal of this project is to identify technologies that could replace the use of CFCs in refrigeration, heating, and air-conditioning equipment; to evaluate the direct impacts of chemical emissions on global warming; and to compile accurate estimates of energy use and, indirect CO{sub 2} emissions of substitute technologies. The first phase of this work focused on alternatives that could be commercialized before themore » year 2000. The second phase of the project is examining not-in-kind and next-generation technologies that could be developed to replace CFCs, HCFCs, and HFCs over a longer period. As part of this effort, Oak Ridge National Laboratory held a workshop on June 23--25, 1993. The preliminary agenda covered a broad range of alternative technologies and at least one speaker was invited to make a brief presentation at the workshop on each technology. Some of the invited speakers were unable to participate, and in a few cases other experts could not be identified. As a result, those technologies were not represented at the workshop. Each speaker was asked to prepare a five to seven page paper addressing six key issues concerning the technology he/she is developing. These points are listed in the sidebar. Each expert also spoke for 20 to 25 minutes at the workshop and answered questions from the other participants concerning the presentation and area of expertise. The primary goal of the presentations and discussions was to identify the developmental state of the technology and to obtain comparable data on system efficiencies. Individual papers are indexed separately.« less
Wind-US Results for the AIAA 2nd Propulsion Aerodynamics Workshop
NASA Technical Reports Server (NTRS)
Dippold, Vance III; Foster, Lancert; Mankbadi, Mina
2014-01-01
This presentation contains Wind-US results presented at the 2nd Propulsion Aerodynamics Workshop. The workshop was organized by the American Institute of Aeronautics and Astronautics, Air Breathing Propulsion Systems Integration Technical Committee with the purpose of assessing the accuracy of computational fluid dynamics for air breathing propulsion applications. Attendees included representatives from government, industry, academia, and commercial software companies. Participants were encouraged to explore and discuss all aspects of the simulation process including the effects of mesh type and refinement, solver numerical schemes, and turbulence modeling. The first set of challenge cases involved computing the thrust and discharge coefficients for a 25deg conical nozzle for a range of nozzle pressure ratios between 1.4 and 7.0. Participants were also asked to simulate two cases in which the 25deg conical nozzle was bifurcated by a solid plate, resulting in vortex shedding (NPR=1.6) and shifted plume shock (NPR=4.0). A second set of nozzle cases involved computing the discharge and thrust coefficients for a convergent dual stream nozzle for a range of subsonic nozzle pressure ratios. The workshop committee also compared the plume mixing of these cases across various codes and models. The final test case was a serpentine inlet diffuser with an outlet to inlet area ratio of 1.52 and an offset of 1.34 times the inlet diameter. Boundary layer profiles, wall static pressure, and total pressure at downstream rake locations were examined.
Aircraft Survivability: Modeling and Simulation Credibility, Summer 2002
2002-01-01
Weapons Center at China Lake in 1982 as a warfare analyst (Air-to- Air and Strike Warfare) for the Weapons Planning Group. In 1987 , he took over as...goal, the Workshop Executive Advisory Committee (WEAC) immediately fol- lowing WSII began sifting through the workshop presentations, panel discus...context is key.” V&V must be anchored to purpose (Hollenbach, pg 4) • Need to anchor across fidelity (Greaney)— maps to aggregation/de-aggregation
Chemist--meteorologist workshop, Ft. Lauderdale, Florida, January 15--19, 1973
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
1973-01-01
Panel recommendations from the Third Chemist--Meteorologist Workshop are presented with the hope that these recommendations will be useful in determining air pollution problems needing funther research and in establisbing priorities for programming and funding such research studies. The recondmendations were made by four separate panels on: regional air studies, disposition and removal processes; global balances of chemical pollutants and radioactive gases; and photochemical and transformation modelling of pollutants. (LCL)
The Outdoor Air Pollution and Brain Health Workshop
Block, Michelle L.; Elder, Alison; Auten, Rick L.; Bilbo, Staci D.; Chen, Honglei; Chen, Jiu-Chiuan; Cory-Slechta, Deborah A.; Costa, Daniel; Diaz-Sanchez, David; Dorman, David C.; Gold, Diane; Gray, Kimberly; Jeng, Hueiwang Anna; Kaufman, Joel D.; Kleinman, Michael T.; Kirshner, Annette; Lawler, Cindy; Miller, David S.; Nadadur, Sri; Ritz, Beate; Semmens, Erin O.; Tonelli, Leonardo H.; Veronesi, Bellina; Wright, Robert O.; Wright, Rosalind
2013-01-01
Accumulating evidence suggests that outdoor air pollution may have a significant impact on central nervous system (CNS) health and disease. To address this issue, the National Institute of Environmental Health Sciences/National Institute of Health convened a panel of research scientists that was assigned the task of identifying research gaps and priority goals essential for advancing this growing field and addressing an emerging human health concern. Here, we review recent findings that have established the effects of inhaled air pollutants in the brain, explore the potential mechanisms driving these phenomena, and discuss the recommended research priorities/approaches that were identified by the panel. PMID:22981845
Community Air Monitoring Training
EPA hosted a training workshop to share tools used to conduct citizen science projects involving Next Generation Air Monitoring (NGAM) technology and to educate interested groups and individuals on best practices for successful air monitoring projects.
Constellation Overview: Ares V Solar System Science Workshop
NASA Technical Reports Server (NTRS)
Horack, John M.
2008-01-01
Presentation topics include: what is NASA's mission, why the Moon next, options for Moon landings, NASA's exploration roadmap, building on a foundation of proven technologies - launch vehicle comparisons, Ares nationwide team, Ares I elements, vehicle integration accomplishments, Aires I-X test flight, Ares I-X accomplishments, Orion crew exploration vehicle, Altair lunar lander, and Ares V elements.
Air toxics and asthma: impacts and end points.
Eschenbacher, W L; Holian, A; Campion, R J
1995-01-01
The National Urban Air Toxics Research Center (NUATRC) hosted a medical/scientific workshop focused on possible asthma/air toxics relationships, with the results of the NUATRC's first research contract with the University of Cincinnati as the point of discussion. The workshop was held at the Texas Medical Center on 4 February 1994 and featured presentations by distinguished academic, government, and industry scientists. This one-day session explored the impact of various environmental factors, including air toxics, on asthma incidence and exacerbation; an emphasis was placed on future research directions to be pursued in the asthma/air toxics area. A key research presentation on the association of air toxics and asthma, based on the study sponsored by NUATRC, was given by Dr. George Leikauf of the University of Cincinnati Medical Center. Additional presentations were made by H. A. Boushey, Jr., Cardiovascular Research Institute/University of California at San Francisco, who spoke on of the Basic Mechanisms of Asthma; K. Sexton, U.S. Environmental Protection Agency, who spoke on hazardous air pollutants: science/policy interface; and D. V. Bates, Department of Health Care and Epidemiology at the University of British Columbia, who spoke on asthma epidemiology. H. Koren, U.S. Environmental Protection Agency, and M. Yeung, of the Respiratory Division/University of British Columbia, Vancouver General Hospital, discussed occupational health impacts on asthma. Doyle Pendleton, Texas Natural Resource Conservation Commission, reviewed air quality measurements in Texas. The information presented at the workshop suggested a possible association of asthma exacerbations with ozone and particulate matter (PM10); however, direct relationships between worsening asthma and air toxic ambient levels were not established. Possible respiratory health effects associated with air toxics will require considerably more investigation, especially in the area of human exposure assessment. Two major recommendations for future research resulted from this workshop and an accompanying NUATRC Scientific Advisory Panel meeting: a need for more complete individual personal exposure assessments so that accurate determinations of actual personal exposures to various pollutants can be made; and a need for field experiments utilizing biomarkers of exposure and effect to more accurately assess the extent and variability of the biological effects, if any, of individual air toxics. PMID:8549475
On Sept. 28-29, 2016 in Washington, DC, EPA’s held its first workshop to share multi-stakeholder perspectives on how to improve cardiopulmonary health outcomes through the integration of environmental health, public health, health care services, data.
SURFACE-COATING-FREE MATERIALS WORKSHOP SUMMARY REPORT
The report documents a pollution prevention workshop that explored the concenpt of surface-coating-free materials (SCFMs) and the potential impact of this type of amterial on volatile organic compound (VOC) and air toxic emissions from surface coating operations. he report summar...
Potential impacts of advanced aerodynamic technology on air transportation system productivity
NASA Technical Reports Server (NTRS)
Bushnell, Dennis M. (Editor)
1994-01-01
Summaries of a workshop held at NASA Langley Research Center in 1993 to explore the application of advanced aerodynamics to airport productivity improvement are discussed. Sessions included discussions of terminal area productivity problems and advanced aerodynamic technologies for enhanced high lift and reduced noise, emissions, and wake vortex hazard with emphasis upon advanced aircraft configurations and multidisciplinary solution options.
Impact of Pluralistic Mentoring at the United States Air Force Academy (USAFA)
2008-08-01
quantitative research . The researcher explored a bounded situation at the USAFA: the new Officer Development System, which was unveiled in January 2004 to...185 Past Preliminary Research Steps for Quantitative Study..................... 186 Pilot Study...and the PM workshop training sessions. Chapter Five sets forth the design and methodology that was conducted during the quantitative research to
Over the past few decades, air quality planners have forecasted future air pollution levels based on information about changing emissions from stationary and mobile sources, population trends, transportation demand, natural sources of emissions, and other pressures on air quality...
Physics of Forced Unsteady Separation
NASA Technical Reports Server (NTRS)
Carr, Lawrence W. (Editor)
1992-01-01
This report contains the proceedings of a workshop held at NASA Ames Research Center in April 1990. This workshop was jointly organized by NASA, the Air Force Office of Scientific Research (AFOSR), and the Army Research Office (ARO), and was directed toward improved understanding of the physical processes that cause unsteady separation to occur. The proceedings contain the written contributions for the workshop, and include selected viewgraphs used in the various presentations.
Dennis Haddow; Robert Musselman; Tamara Blett; Richard Fisher
1998-01-01
This document is the product of an ongoing effort begun at a 4-day workshop sponsored by the Rocky Mountain Region of the USDA Forest Service, held in December 1990 in Estes Park, Colorado. Workshop participants gathered in groups to work on pollution impacts in three specific areas: aquatic ecosystems; terrestrial ecosystems; and visibility. Because the groups met...
Systems Engineering Workshops | Wind | NREL
Workshops Systems Engineering Workshops The Wind Energy Systems Engineering Workshop is a biennial topics relevant to systems engineering and the wind industry. The presentations and agendas are available for all of the Systems Engineering Workshops: The 1st NREL Wind Energy Systems Engineering Workshop
2010-05-01
to prevent fouling • Environmental Materials Water and hydrocarbons as third bodies Controllable friction (thermal, stress, chemical induced...Final Report Air Force Grant # FA9550-10-1-0261 Fundamentals of Tribology Workshop For the period: 03/17/2020-02/14/2011 Contract... Tribology An AFOSR Sponsored Workshop Gainesville, FL May 2010 Project Summary On May 10-11, 2010, leading scientists and engineers of the
Ultrafine Particle Metrics and Research Considerations: Review of the 2015 UFP Workshop.
Baldauf, Richard W; Devlin, Robert B; Gehr, Peter; Giannelli, Robert; Hassett-Sipple, Beth; Jung, Heejung; Martini, Giorgio; McDonald, Joseph; Sacks, Jason D; Walker, Katherine
2016-10-28
In February 2015, the United States Environmental Protection Agency (EPA) sponsored a workshop in Research Triangle Park, NC, USA to review the current state of the science one missions, air quality impacts, and health effects associated with exposures to ultrafine particles[1].[...].
Ultrafine Particle Metrics and Research Considerations: Review of the 2015 UFP Workshop
In February 2015, the United States Environmental Protection Agency (EPA) sponsored a workshop in Research Triangle Park, North Carolina, USA to review the current state of the science on emissions, air quality impacts, and health effects associated with exposures to ultrafine pa...
Test Report, BioLite HomeStove with Wood Fuel, Air Pollutant Emissions and Fuel Efficiency
Test results were obtained in accordance with ISO (International Organization for Standardization) IWA (International Workshop Agreement) 11:2012 that was unanimously affirmed by more than 90 stakeholders at the ISO International Workshop on Cookstoves on February 28-29, 2012 in ...
Test Report, BioLite Home Stove with Wood Fuel, Air Pollutant Emissions and Fuel Efficiency
Test results were obtained in accordance with ISO (International Organization for Standardization) IWA (International Workshop Agreement) 11:2012 that was unanimously affirmed by more than 90 stakeholders at the ISO International Workshop on Cookstoves on February 28-29, 2012 in ...
Towards the Next Generation Air Quality Modeling System ...
The community multiscale air quality (CMAQ) model of the U.S. Environmental Protection Agency is one of the most widely used air quality model worldwide; it is employed for both research and regulatory applications at major universities and government agencies for improving understanding of the formation and transport of air pollutants. It is noted, however, that air quality issues and climate change assessments need to be addressed globally recognizing the linkages and interactions between meteorology and atmospheric chemistry across a wide range of scales. Therefore, an effort is currently underway to develop the next generation air quality modeling system (NGAQM) that will be based on a global integrated meteorology and chemistry system. The model for prediction across scales-atmosphere (MPAS-A), a global fully compressible non-hydrostatic model with seamlessly refined centroidal Voronoi grids, has been chosen as the meteorological driver of this modeling system. The initial step of adapting MPAS-A for the NGAQM was to implement and test the physics parameterizations and options that are preferred for retrospective air quality simulations (see the work presented by R. Gilliam, R. Bullock, and J. Herwehe at this workshop). The next step, presented herein, would be to link the chemistry from CMAQ to MPAS-A to build a prototype for the NGAQM. Furthermore, the techniques to harmonize transport processes between CMAQ and MPAS-A, methodologies to connect the chemis
Proceedings of the 1981 RADC Microwave Magnetics Technology Workshop, June 10-11, 1981,
1983-01-01
tactical radar system, one that is not unrealistic, a tactical radar system of 20,000 elements. If the Air Force were to buy 50 of these systems, which...that you need to accurately match the devices RF-IF. One of the problems that we have right now is that, say at 30 GHz you wanted to buy match down...converters at 30 GHz, you’d have a very difficult time buying matched down converters. The people developing millimeter wave devices are right now
INTEGRATING AIR QUALITY DATA TO INFORM HUMAN HEALTH DECISIONS
The August 1-2, 2005 EPA-NIEHS workshop is addressing the linkages between air quality and human health. My presentation will discuss the strengths and limitations of various databases for relating air quality to health impacts. Specifically, the need for fusing ground-based, s...
Test results were obtained in accordance with ISO (International Organization for Standardization) IWA (International Workshop Agreement) 11:2012 that was unanimously affirmed by more than 90 stakeholders at the ISO International Workshop on Cookstoves on February 28-29, 2012 in ...
Test results were obtained in accordance with ISO (International Organization for Standardization) IWA (International Workshop Agreement) 11:2012 that was unanimously affirmed by more than 90 stakeholders at the ISO International Workshop on Cookstoves on February 28-29, 2012 in ...
The Mercury Monitoring Workshop was developed because mercury contamination, both nationally and internationally, has long been recognized as a growing problem for both humans and ecosystems. Mercury is released to the environment from a variety of human (anthropogenic) sources i...
Test results were obtained in accordance with ISO (International Organization for Standardization) IWA (International Workshop Agreement) 11:2012 that was unanimously affirmed by more than 90 stakeholders at the ISO International Workshop on Cookstoves on February 28-29, 2012 in ...
Computational Methods for Crashworthiness
NASA Technical Reports Server (NTRS)
Noor, Ahmed K. (Compiler); Carden, Huey D. (Compiler)
1993-01-01
Presentations and discussions from the joint UVA/NASA Workshop on Computational Methods for Crashworthiness held at Langley Research Center on 2-3 Sep. 1992 are included. The presentations addressed activities in the area of impact dynamics. Workshop attendees represented NASA, the Army and Air Force, the Lawrence Livermore and Sandia National Laboratories, the aircraft and automotive industries, and academia. The workshop objectives were to assess the state-of-technology in the numerical simulation of crash and to provide guidelines for future research.
Summary of the Fourth AIAA CFD Drag Prediction Workshop
NASA Technical Reports Server (NTRS)
Vassberg, John C.; Tinoco, Edward N.; Mani, Mori; Rider, Ben; Zickuhr, Tom; Levy, David W.; Brodersen, Olaf P.; Eisfeld, Bernhard; Crippa, Simone; Wahls, Richard A.;
2010-01-01
Results from the Fourth AIAA Drag Prediction Workshop (DPW-IV) are summarized. The workshop focused on the prediction of both absolute and differential drag levels for wing-body and wing-body-horizontal-tail configurations that are representative of transonic transport air- craft. Numerical calculations are performed using industry-relevant test cases that include lift- specific flight conditions, trimmed drag polars, downwash variations, dragrises and Reynolds- number effects. Drag, lift and pitching moment predictions from numerous Reynolds-Averaged Navier-Stokes computational fluid dynamics methods are presented. Solutions are performed on structured, unstructured and hybrid grid systems. The structured-grid sets include point- matched multi-block meshes and over-set grid systems. The unstructured and hybrid grid sets are comprised of tetrahedral, pyramid, prismatic, and hexahedral elements. Effort is made to provide a high-quality and parametrically consistent family of grids for each grid type about each configuration under study. The wing-body-horizontal families are comprised of a coarse, medium and fine grid; an optional extra-fine grid augments several of the grid families. These mesh sequences are utilized to determine asymptotic grid-convergence characteristics of the solution sets, and to estimate grid-converged absolute drag levels of the wing-body-horizontal configuration using Richardson extrapolation.
Village Green Project and Air Sensor Kits
This is a presentation for the OAQPS Teachers Workshop. Will provide a background overview on the Village Green Project and our air sensor kit for outreach, then have the teachers try putting it together.
1979-10-10
intercept the ILS at Allegheny County. The outside air temperature was +60 at 3000 feet. It was possible to perform the ILS approach within one dot...stMatr wW lrve of the Aru paca roferomd -L Zt* AMU taliax. JAM4 0. E8DLMSM cc: P-13Ol/13iA/1O/203/200/g-21-O/23/C-E’Ifl-4 no 0Ai3 ..c /2 .89 AGENDA ITEM...to intercept the ILS at Allegheny County. The outside air temperature was +60 at 3000 feet. It was possible to perform the ILS approach within one dot
NASA Technical Reports Server (NTRS)
Vittek, J. F., Jr.
1975-01-01
Papers are presented which review modern lighter-than-air (LTA) airship design concepts and LTA structures and materials technology, as well as perform economic and market analyses for assessment of the viability of future LTA development programs. Potential applications of LTA vehicles are examined. Some of the topics covered include preliminary estimates of operating costs for LTA transports, an economic comparison of three heavy lift airborn systems, boundary layer control for airships, computer aided flexible envelope designs, state-of-the-art of metalclad airships, aspects of hybrid-Zeppelins, the LTA vehicle as a total cargo system, unmanned powered balloons, and a practical concept for powered or tethered weight-lifting LTA vehicles. Individual items are announced in this issue.
Fifth Annual Workshop on Space Operations Applications and Research (SOAR 1991), volume 1
NASA Technical Reports Server (NTRS)
Krishen, Kumar (Editor)
1992-01-01
More than 110 papers were presented at this Symposium, sponsored by the U.S. Air Force Phillips Laboratory, the University of Houston-Clear Lake, and NASA JSC. The technical areas covered were Intelligent Systems, Automation and Robotics, Human Factors and Life Sciences, and Environmental Interactions. The U.S. Air Force and NASA programmatic overviews and panel discussions were also held in each technical area. These proceedings, along with the comments and suggestions made by the panelists and keynote speakers, will be used in assessing the progress made in joint USAF/NASA projects and activities. Furthermore, future collaborative/joint programs will also be identified. The symposium proceedings includes papers covering various disciplines presented by experts from NASA, the Air Force, universities, and industry.
Atmospheric nitrogen compounds II: emissions, transport, transformation, deposition and assessment
NASA Astrophysics Data System (ADS)
Aneja, Viney P.; Roelle, Paul A.; Murray, George C.; Southerland, James; Erisman, Jan Willem; Fowler, David; Asman, Willem A. H.; Patni, Naveen
The Atmospheric Nitrogen Compounds II: Emissions, Transport, Transformation, Deposition and Assessment workshop was held in Chapel Hill, NC from 7 to 9 June 1999. This international conference, which served as a follow-up to the workshop held in March 1997, was sponsored by: North Carolina Department of Environment and Natural Resources; North Carolina Department of Health and Human Services, North Carolina Office of the State Health Director; Mid-Atlantic Regional Air Management Association; North Carolina Water Resources Research Institute; Air and Waste Management Association, RTP Chapter; the US Environmental Protection Agency and the North Carolina State University (College of Physical and Mathematical Sciences, and North Carolina Agricultural Research Service). The workshop was structured as an open forum at which scientists, policy makers, industry representatives and others could freely share current knowledge and ideas, and included international perspectives. The workshop commenced with international perspectives from the United States, Canada, United Kingdom, the Netherlands, and Denmark. This article summarizes the findings of the workshop and articulates future research needs and ways to address nitrogen/ammonia from intensively managed animal agriculture. The need for developing sustainable solutions for managing the animal waste problem is vital for shaping the future of North Carolina. As part of that process, all aspects of environmental issues (air, water, soil) must be addressed as part of a comprehensive and long-term strategy. There is an urgent need for North Carolina policy makers to create a new, independent organization that will build consensus and mobilize resources to find technologically and economically feasible solutions to this aspect of the animal waste problem.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hatley, Darrel D.; Underhill, Ronald M.
Document describes an onsite workshop and building retuning training conducted in Guam in August 2010. Document reports on issues identified during an audit of several buildings and recommendations to save energy throughout the site. During the workshop, it became apparent that as site personnel maintain the facilities at Guam, the following retuning efforts and strategies should be prioritized: (1) Controlling the mechanical systems operational hours and zone temperature set points appeared to present the best opportunities for savings; (2) Zone temperature set points in some buildings are excessively low, especially at night, when the zone temperatures are so cold thatmore » they approached the dewpoint; and (3) Manually-set outside air dampers are providing excessive outside air, especially for spaces that are unoccupied. Two of the larger schools, one on the Naval Base and one on Anderson AFB, are in need of a significant recommissioning effort. These facilities are relatively new, with direct digital controls (DDC) but are significantly out of balance. The pressure in one school is extremely negative, which is pulling humid air through the facility each time a door is opened. The draft can be felt several feet down the halls. The pressure in the other school is extremely positive relative to the outside, and you can stand 20-feet outside and still feel cool drafts of air exiting the building. It is recommended that humidity sensors be installed in all new projects and retrofitted into exist facilities. In this humid climate, control of humidity is very important. There are significant periods of time when the mechanical systems in many buildings can be unloaded and dehumidification is not required. The use of CO{sub 2} sensors should also be considered in representative areas. CO{sub 2} sensors determine whether spaces are occupied so that fresh air is only brought into the space when needed. By reducing the amount of outside air brought into the space, the humidity load is also substantially reduced. CO{sub 2} and humidity sensors, combined with outside air sensors, can be used to predict whether conditions are amenable to mold growth and to automatically adjust systems to help prevent mold without using extra energy. The goal of this training is to give the building operators the knowledge needed to make positive changes in the operation of building systems. As class participants apply this knowledge, building systems will run more efficiently, occupant comfort should improve, while saving energy and reducing greenhouse gas emissions.« less
Polk, William W; Sharma, Monita; Sayes, Christie M; Hotchkiss, Jon A; Clippinger, Amy J
2016-04-23
Aerosol generation and characterization are critical components in the assessment of the inhalation hazards of engineered nanomaterials (NMs). An extensive review was conducted on aerosol generation and exposure apparatus as part of an international expert workshop convened to discuss the design of an in vitro testing strategy to assess pulmonary toxicity following exposure to aerosolized particles. More specifically, this workshop focused on the design of an in vitro method to predict the development of pulmonary fibrosis in humans following exposure to multi-walled carbon nanotubes (MWCNTs). Aerosol generators, for dry or liquid particle suspension aerosolization, and exposure chambers, including both commercially available systems and those developed by independent researchers, were evaluated. Additionally, characterization methods that can be used and the time points at which characterization can be conducted in order to interpret in vitro exposure results were assessed. Summarized below is the information presented and discussed regarding the relevance of various aerosol generation and characterization techniques specific to aerosolized MWCNTs exposed to cells cultured at the air-liquid interface (ALI). The generation of MWCNT aerosols relevant to human exposures and their characterization throughout exposure in an ALI system is critical for extrapolation of in vitro results to toxicological outcomes in humans.
The 4th workshop of the Air Quality Model Evaluation International Initiative (AQMEII) was held on May 8 in Utrecht, The Netherlands, in conjunction with the NATO/SPS International Technical Meeting on Air Pollution Modeling and Its Application. AQMEII was launched in 2009 as a l...
Scheme for air treatment in welding workshop
NASA Astrophysics Data System (ADS)
Wang, Gang; Wu, Jin
2017-04-01
There are two major ways to control the pollution of welding fume which are respectively local purification and comprehensive purification. In this paper, the practical welding workshop at school is taken as an example to realize fume treatment in different training conditions by adopting the scheme in which two major ways are combined.
GLOBAL CHANGE RESEARCH NEWS #9: ORD PROVIDES TECHNICAL SUPPORT TO EPA/OIA & DOS INITIATIVE IN EGYPT
This ninth edition reports on a workshop on global climate change that was held in Cairo, Egypt, on May 10-12, 1999. The workshop represented a successful partnership between EPA's Office of International Affairs, Office of Research and Development (ORD), Office of Air and Radiat...
Sixth Annual Workshop on Space Operations Applications and Research (SOAR 1992), volume 2
NASA Technical Reports Server (NTRS)
Krishen, Kumar (Editor)
1993-01-01
This document contains papers presented at the Space Operations, Applications, and Research Symposium (SOAR) hosted by the U.S. Air Force (USAF) on 4-6 Aug. 1992. The symposium was cosponsored by the Air Force Material Command and by NASA/JSC. Key technical areas covered during the symposium were robotics and telepresence, automation and intelligent systems, human factors, life sciences, and space maintenance and servicing. The SOAR differed from most other conferences in that it was concerned with Government-sponsored research and development relevant to aerospace operations. Symposium proceedings include papers covering various disciplines presented by experts from NASA, the USAF, universities, and industry.
J. Peterson; D. Schmoldt; D. Peterson; J. Eilers; R. Fisher; R. Bachman
1992-01-01
Forest Service air resource managers in the Pacific Northwest are responsible for protecting class 1 wilderness areas from air pollution. To do this, they need scientifically defensible information to determine critical concentrations of air pollution having the potential to impact class 1 wilderness values. This report documents the results of a workshop where current...
Janice Peterson; Daniel L. Schmoldt; David Peterson; Joseph Eilers; Richard Fisher; Robert Bachman
1992-01-01
Forest Service air resource managers in the Pacific Northwest are responsible for protecting class I wilderness areas from air pollution. To do this, they need scientifically defensible information to determine critical concentrations of air pollution having the potential to impact class I wilderness values. This report documents the results of a workshop where current...
Aviation Particle Emissions Workshop
NASA Technical Reports Server (NTRS)
Wey, Chowen C. (Editor)
2004-01-01
The Aviation Particle Emissions Workshop was held on November 18 19, 2003, in Cleveland, Ohio. It was sponsored by the National Aeronautic and Space Administration (NASA) under the Vehicle Systems Program (VSP) and the Ultra- Efficient Engine Technology (UEET) Project. The objectives were to build a sound foundation for a comprehensive particulate research roadmap and to provide a forum for discussion among U.S. stakeholders and researchers. Presentations included perspectives from the Federal Aviation Administration, the U.S. Environmental Protection Agency, NASA, and United States airports. There were five interactive technical sessions: sampling methodology, measurement methodology, particle modeling, database, inventory and test venue, and air quality. Each group presented technical issues which generated excellent discussion. The five session leads collaborated with their members to present summaries and conclusions to each content area.
Fifth Annual Workshop on the Application of Probabilistic Methods for Gas Turbine Engines
NASA Technical Reports Server (NTRS)
Briscoe, Victoria (Compiler)
2002-01-01
These are the proceedings of the 5th Annual FAA/Air Force/NASA/Navy Workshop on the Probabilistic Methods for Gas Turbine Engines hosted by NASA Glenn Research Center and held at the Holiday Inn Cleveland West. The history of this series of workshops stems from the recognition that both military and commercial aircraft engines are inevitably subjected to similar design and manufacturing principles. As such, it was eminently logical to combine knowledge bases on how some of these overlapping principles and methodologies are being applied. We have started the process by creating synergy and cooperation between the FAA, Air Force, Navy, and NASA in these workshops. The recent 3-day workshop was specifically designed to benefit the development of probabilistic methods for gas turbine engines by addressing recent technical accomplishments and forging new ideas. We accomplished our goals of minimizing duplication, maximizing the dissemination of information, and improving program planning to all concerned. This proceeding includes the final agenda, abstracts, presentations, and panel notes, plus the valuable contact information from our presenters and attendees. We hope that this proceeding will be a tool to enhance understanding of the developers and users of probabilistic methods. The fifth workshop doubled its attendance and had the success of collaboration with the many diverse groups represented including government, industry, academia, and our international partners. So, "Start your engines!" and utilize these proceedings towards creating safer and more reliable gas turbine engines for our commercial and military partners.
D. Schirokauer; L. Geiser; A. Bytnerowicz; M. Fenn; K. Dillman
2014-01-01
Air quality and air quality related values are important resources to the National Park Service (NPS) units and Wilderness areas in northern Southeast Alaska. Air quality monitoring was prioritized as a high-priority Vital Sign at the Southeast Alaska Networkâs (SEAN) Inventory and Monitoring Programâs terrestrial scoping workshop (Derr and Fastie 2006). Air quality...
NASA Lunar Dust Filtration and Separations Workshop Report
NASA Technical Reports Server (NTRS)
Agui, Juan H.; Stocker, Dennis P.
2009-01-01
NASA Glenn Research Center hosted a 2.5-day workshop, entitled "NASA Lunar Dust Filtration and Separations Workshop" at the Ohio Aerospace Institute in Cleveland, Ohio, on November 18 to 20, 2008. The purpose of the workshop was to address the issues and challenges of particulate matter removal from the cabin atmospheres in the Altair lunar lander, lunar habitats, and in pressurized rovers. The presence of lunar regolith dust inside the pressurized volumes was a theme of particular interest. The workshop provided an opportunity for NASA, industry experts, and academia to identify and discuss the capabilities of current and developing air and gas particulate matter filtration and separations technologies as they may apply to NASA s needs. A goal of the workshop was to provide recommendations for strategic research areas in cabin atmospheric particulate matter removal and disposal technologies that will advance and/or supplement the baseline approach for these future lunar surface exploration missions.
NASA Technical Reports Server (NTRS)
Kerczewski, Robert J.
2002-01-01
Continuing growth in regional and global air travel has resulted in increasing traffic congestion in the air and on the ground. In spite of occasional temporary downturns due to economic recessions and catastrophic events, average growth rates of air travel have remained high since the 1960s. The resulting congestion, which constrains expansion of the air transportation industry, inflicts schedule delays and decreases overall system efficiency, creating a pressing need to develop more efficient methods of air traffic management (ATM). New ATM techniques, procedures, air space automation methods, and decision support tools are being researched and developed for deployment in time frames stretching from the next few years to the year 2020 and beyond. As these methods become more advanced and increase in complexity, the requirements for information generation, sharing and transfer among the relevant entities in the ATM system increase dramatically. However, current aeronautical communications systems will be inadequate to meet the future information transfer demands created by these advanced ATM systems. Therefore, the NASA Glenn Research Center is undertaking research programs to develop communication, methods and key technologies that can meet these future requirements. As part of this process, studies, workshops, testing and experimentation, and research and analysis have established a number of research and technology development needs. The purpose of this paper is to outline the critical research and technology needs that have been identified in these activities, and explain how these needs have been determined.
INNOVATIVE METHODS FOR EMISSION INVENTORY DEVELOPMENT AND EVALUATION: WORKSHOP SYNTHESIS
Emission inventories are key databases for evaluating, managing, and regulating air pollutants. Refinements and innovations in instruments that measure air pollutants, models that calculate emissions, and techniques for data management and uncertainty assessment are critical to ...
“AQMEII Status Update”This presentation provided an overview and status update of the Air Quality Model Evaluation International Initative (AQMEII) to participants of a workshop of the Task Force on Hemispheric Transport of Air Pollution (TF-HTAP) . In addition, the p...
Report of the workshop on Aviation Safety/Automation Program
NASA Technical Reports Server (NTRS)
Morello, Samuel A. (Editor)
1990-01-01
As part of NASA's responsibility to encourage and facilitate active exchange of information and ideas among members of the aviation community, an Aviation Safety/Automation workshop was organized and sponsored by the Flight Management Division of NASA Langley Research Center. The one-day workshop was held on October 10, 1989, at the Sheraton Beach Inn and Conference Center in Virginia Beach, Virginia. Participants were invited from industry, government, and universities to discuss critical questions and issues concerning the rapid introduction and utilization of advanced computer-based technology into the flight deck and air traffic controller workstation environments. The workshop was attended by approximately 30 discipline experts, automation and human factors researchers, and research and development managers. The goal of the workshop was to address major issues identified by the NASA Aviation Safety/Automation Program. Here, the results of the workshop are documented. The ideas, thoughts, and concepts were developed by the workshop participants. The findings, however, have been synthesized into a final report primarily by the NASA researchers.
Residential Central Air Conditioning and Heat Pump Installation – Workshop Outcomes
DOE Office of Scientific and Technical Information (OSTI.GOV)
Goetzler, William; Zogg, Robert; Young, Jim
DOE's Building Technologies Office works with researchers and industry partners to develop and deploy technologies that can substantially reduce energy consumption in residential and commercial buildings. This report aims to advance BTO’s energy savings, emissions reduction, and other program goals by identifying research and development (R&D), demonstration and deployment, and other non-regulatory initiatives for improving the design and installation of residential central air conditioners (CAC) and central heat pumps (CHP). Improving the adoption of CAC/CHP design and installation best practices has significant potential to reduce equipment costs, improve indoor air quality and comfort, improve system performance, and most importantly, reducemore » household energy consumption and costs for heating and cooling by addressing a variety of common installation issues.« less
JANNAF Rocket Nozzle Technology Subcommittee Executive Committee Report
NASA Technical Reports Server (NTRS)
Lawrence, Timothy W.; Munafo, Paul M. (Technical Monitor)
2002-01-01
This viewgraph presentation provides information on the structure and activities of the panels of the Joint Army Navy NASA Air Force (JANNAF) Rocket Nozzle Technology Subcommittee. The panels profiled are the Processing Science and Materials Panel, the Nozzle Design, Test, and Evaluation Panel, the Nozzle Analysis and Modeling Panel, and the Nozzle Control Systems Panel. The presentation also lists meetings, workshops, and publications in which the subcommittee participated during the reporting period.
Publicly Released Prompt Radiation Spectra Suitable for Nuclear Detonation Simulations, Revision 1
2017-12-01
dominates the photon emission. During the Hiroshima and Nagasaki bombings , the prompt radiation contributed from 40% to 70% of the free-in-air dose...Terms for the Initial Radiation. LA-UR-83-198. US-Japan Joint Workshop on the Reassessment of the A- Bomb Radiation Dosimetry in Hiroshima and Nagasaki...2005). Reassessment of the Atomic Bomb Radiation Dosimetry for Hiroshima and Nagasaki—Dosimetry System 2002. Hiroshima, Japan: Radiation Effects
1978-01-01
required for the trans- portation industry and particularly as required by our mobile defense systems. For the production of transportation fuels...nature of the refinery feedstock and the requirements of the market place which is being targeted for product distribution. As with refining, the end...arsenic levels. The nitrogen and oxygen levels dictate a higher hydro- processing severity to make stable products . Due to the small yield of 6500F
Reuseable Objects Software Environment (ROSE): Introduction to Air Force Software Reuse Workshop
NASA Technical Reports Server (NTRS)
Cottrell, William L.
1994-01-01
The Reusable Objects Software Environment (ROSE) is a common, consistent, consolidated implementation of software functionality using modern object oriented software engineering including designed-in reuse and adaptable requirements. ROSE is designed to minimize abstraction and reduce complexity. A planning model for the reverse engineering of selected objects through object oriented analysis is depicted. Dynamic and functional modeling are used to develop a system design, the object design, the language, and a database management system. The return on investment for a ROSE pilot program and timelines are charted.
NASA Astrophysics Data System (ADS)
von Schneidemesser, E.; Schmale, J.; Van Aardenne, J.
2013-12-01
Air pollution and climate change are often treated at national and international level as separate problems under different regulatory or thematic frameworks and different policy departments. With air pollution and climate change being strongly linked with regard to their causes, effects and mitigation options, the integration of policies that steer air pollutant and greenhouse gas emission reductions might result in cost-efficient, more effective and thus more sustainable tackling of the two problems. To support informed decision making and to work towards an integrated air quality and climate change mitigation policy requires the identification, quantification and communication of present-day and potential future co-benefits and trade-offs. The identification of co-benefits and trade-offs requires the application of appropriate metrics that are well rooted in science, easy to understand and reflect the needs of policy, industry and the public for informed decision making. For the purpose of this workshop, metrics were loosely defined as a quantified measure of effect or impact used to inform decision-making and to evaluate mitigation measures. The workshop held on October 9 and 10 and co-organized between the European Environment Agency and the Institute for Advanced Sustainability Studies brought together representatives from science, policy, NGOs, and industry to discuss whether current available metrics are 'fit for purpose' or whether there is a need to develop alternative metrics or reassess the way current metrics are used and communicated. Based on the workshop outcome the presentation will (a) summarize the informational needs and current application of metrics by the end-users, who, depending on their field and area of operation might require health, policy, and/or economically relevant parameters at different scales, (b) provide an overview of the state of the science of currently used and newly developed metrics, and the scientific validity of these metrics, (c) identify gaps in the current information base, whether from the scientific development of metrics or their application by different users.
2015 IECRE: PV System Certification Workshop | Photovoltaic Research | NREL
IECRE: PV System Certification Workshop 2015 IECRE: PV System Certification Workshop Thursday the guidelines for certifying PV systems. This workshop included an introduction of IECRE followed by discussions targeting the most critical or controversial items. This workshop gathered wide input from the PV
COMIS -- an international multizone air-flow and contaminant transport model
DOE Office of Scientific and Technical Information (OSTI.GOV)
Feustel, H.E.
1998-08-01
A number of interzonal models have been developed to calculate air flows and pollutant transport mechanisms in both single and multizone buildings. A recent development in multizone air-flow modeling, the COMIS model, has a number of capabilities that go beyond previous models, much as COMIS can be used as either a stand-alone air-flow model with input and output features or as an infiltration module for thermal building simulation programs. COMIS was designed during a 12 month workshop at Lawrence Berkeley National Laboratory (LBNL) in 1988-89. In 1990, the Executive Committee of the International Energy Agency`s Energy Conservation in Buildings andmore » Community Systems program created a working group on multizone air-flow modeling, which continued work on COMIS. The group`s objectives were to study physical phenomena causing air flow and pollutant (e.g., moisture) transport in multizone buildings, develop numerical modules to be integrated in the previously designed multizone air flow modeling system, and evaluate the computer code. The working group supported by nine nations, officially finished in late 1997 with the release of IISiBat/COMIS 3.0, which contains the documented simulation program COMIS, the user interface IISiBat, and reports describing the evaluation exercise.« less
1990-10-01
WORKSHOP COORDINATOR J . Morreale Palisades Institute for Research Services, Inc. WORKSHOP SPONSORS CECOM Center for NV&EO Office of Naval Technology Air...LPE HgCdTe ON SAPPHIRE ................... 33 E.R. Blazejewski, S. Johnston, J.S. Chen, J . Bajaj, G. Williams and L. Bubulac, Rockwell Science Center...ACCEPTOR DENSITIES IN P-TYPE Hgl-xCdxTe BY THERMOELECTRIC MEASUREMENTS ................................... . ........ 63 J . Baars, D. Brink and J
CHARACTERIZING AIR QUALITY FOR ENVIRONMENTAL PUBLIC HEALTH
NERL's Human Exposure and Atmospheric Sciences Division and other participants in the Public Health Air Surveillance Evaluation (PHASE) project will be presenting their results to the Environmnetal Public Health Tracking (EPHT) workshop in Tampa FL. The PHASE project is a collab...
INNOVATIVE METHODS FOR EMISSION-INVENTORY DEVELOPMENT AND EVALUATION: WORKSHOP SUMMARY
Emission inventories are an essential tool for evaluating, managing, and regulating air pollution. Refinements and innovations in instruments that measure air pollutants, models that calculate emissions as well as techniques for data management and uncertainty assessment are nee...
Intelligence Control System for Landfills Based on Wireless Sensor Network
NASA Astrophysics Data System (ADS)
Zhang, Qian; Huang, Chuan; Gong, Jian
2018-06-01
This paper put forward an intelligence system for controlling the landfill gas in landfills to make the landfill gas (LFG) exhaust controllably and actively. The system, which is assigned by the wireless sensor network, were developed and supervised by remote applications in workshop instead of manual work. An automatic valve control depending on the sensor units embedded is installed in tube, the air pressure and concentration of LFG are detected to decide the level of the valve switch. The paper also proposed a modified algorithm to solve transmission problem, so that the system can keep a high efficiency and long service life.
NASA Technical Reports Server (NTRS)
Menke, J. A.
1975-01-01
An operational tethered aerostat system, which demonstrates utility of LTA systems, is described. It was made possible by development of a reliable tethered aerostat that is used to support broadcast equipment at an altitude of 10,000 feet. Two elements of the TCOM system, the aerostat and mooring station, are particularly relevant to the LTA Workshop. They demonstrate the feasibility of using LTA vehicles in real, operational, all-weather applications and, in addition, illustrate an advance in the overall technology base of LTA. The aerostat and the mooring station, including their technical design features and demonstrated performance characteristics, are described.
Gondolesi, Gabriel E; Fernandez, Adriana; Burghardt, Karolina M; Nowakowski, Scott; Kaufman, Stuart S; Pascher, Andreas; Florescu, Diana; Ruiz, Phillip; Vianna, Rodrigo; Clarke, Sara; Oltean, Mihai; Rumbo, Martin; Mazariegos, George; Sudan, Debra L; Farmer, Douglas G
2017-04-01
The 2015 meeting of the Intestinal Transplant Association was held in Buenos Aires, Argentina. This was the 14th International Small Bowel Transplant Symposium, and it was the first meeting organized as a joint venture of the Transplantation Society, the Intestinal Transplant Association, and the Argentinean Transplant Society (Sociedad Argentina de Trasplantes). Innovative aspects of the classic meeting format included workshops sessions, debates, and multicenter studies. This report highlights the most prominent scientific contributions and results of the first such symposium in a Latin American country.
Zeng, Pei-Yuan; Li, Jian-Jun; Liao, Dong-Qi; Tu, Xiang; Xu, Mei-Ying; Sun, Guo-Ping
2013-12-01
Emission characteristics of volatile organic compounds (VOCs) were investigated in an automotive coating manufacturing enterprise. Air samples were taken from eight different manufacturing areas in three workshops, and the species of VOCs and their concentrations were measured by gas chromatography-mass spectrometry (GC-MS). Safety evaluation was also conducted by comparing the concentration of VOCs with the permissible concentration-short term exposure limit (PC-STEL) regulated by the Ministry of Health. The results showed that fifteen VOCs were detected in the indoor air of the automotive coatings workshop, including benzene, toluene, ethylbenzene, xylene, ethyl acetate, butyl acetate, methyl isobutyl ketone, propylene glycol monomethyl ether acetate, trimethylbenzene and ethylene glycol monobutyl ether, Their concentrations widely ranged from 0.51 to 593.14 mg x m(-3). The concentrations of TVOCs were significantly different among different manufacturing processes. Even in the same manufacturing process, the concentrations of each component measured at different times were also greatly different. The predominant VOCs of indoor air in the workshop were identified to be ethylbenzene and butyl acetate. The concentrations of most VOCs exceeded the occupational exposure limits, so the corresponding control measures should be taken to protect the health of the workers.
Nitrogen fluorescence in air for observing extensive air showers
NASA Astrophysics Data System (ADS)
Keilhauer, B.; Bohacova, M.; Fraga, M.; Matthews, J.; Sakaki, N.; Tameda, Y.; Tsunesada, Y.; Ulrich, A.
2013-06-01
Extensive air showers initiate the fluorescence emissions from nitrogen molecules in air. The UV-light is emitted isotropically and can be used for observing the longitudinal development of extensive air showers in the atmosphere over tenth of kilometers. This measurement technique is well-established since it is exploited for many decades by several cosmic ray experiments. However, a fundamental aspect of the air shower analyses is the description of the fluorescence emission in dependence on varying atmospheric conditions. Different fluorescence yields affect directly the energy scaling of air shower reconstruction. In order to explore the various details of the nitrogen fluorescence emission in air, a few experimental groups have been performing dedicated measurements over the last decade. Most of the measurements are now finished. These experimental groups have been discussing their techniques and results in a series of Air Fluorescence Workshops commenced in 2002. At the 8th Air Fluorescence Workshop 2011, it was suggested to develop a common way of describing the nitrogen fluorescence for application to air shower observations. Here, first analyses for a common treatment of the major dependences of the emission procedure are presented. Aspects like the contributions at different wavelengths, the dependence on pressure as it is decreasing with increasing altitude in the atmosphere, the temperature dependence, in particular that of the collisional cross sections between molecules involved, and the collisional de-excitation by water vapor are discussed.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wood, Robert; Bretherton, Chris; McFarquhar, Greg
2014-09-29
A workshop sponsored by the Department of Energy was convened at the University of Washington to discuss the state of knowledge of clouds, aerosols and air-sea interaction over the Southern Ocean and to identify strategies for reducing uncertainties in their representation in global and regional models. The Southern Ocean plays a critical role in the global climate system and is a unique pristine environment, yet other than from satellite, there have been sparse observations of clouds, aerosols, radiation and the air-sea interface in this region. Consequently, much is unknown about atmospheric and oceanographic processes and their linkage in this region.more » Approximately 60 scientists, including graduate students, postdoctoral fellows and senior researchers working in atmospheric and oceanic sciences at U.S. and foreign universities and government laboratories, attended the Southern Ocean Workshop. It began with a day of scientific talks, partly in plenary and partly in two parallel sessions, discussing the current state of the science for clouds, aerosols and air-sea interaction in the Southern Ocean. After the talks, attendees broke into two working groups; one focused on clouds and meteorology, and one focused on aerosols and their interactions with clouds. This was followed by more plenary discussion to synthesize the two working group discussions and to consider possible plans for organized activities to study clouds, aerosols and the air-sea interface in the Southern Ocean. The agenda and talk slides, including short summaries of the highlights of the parallel session talks developed by the session chars, are available at http://www.atmos.washington.edu/socrates/presentations/SouthernOceanPresentations/.« less
77 FR 66837 - Workshop To Define Approaches To Assess the Effectiveness of Policies To Reduce PM2.5
Federal Register 2010, 2011, 2012, 2013, 2014
2012-11-07
... composition of air pollution in urban areas that will occur over both time and space. The purposes of this... implementation of these large-scale changes in levels of air pollution. Consistent with the recent North American... verify the relationship between reductions in air pollution emissions, ambient concentrations, human...
ERIC Educational Resources Information Center
Romero, J. Christian
The purpose of this investigation was to examine the relationship of the first two aerospace education workshops conducted by the United States Space Foundation and sponsored by the Univesity of Colorado, Colorado Springs, and the United States Air Force Academy to attitudes and practices of workshop participants regarding aerospace education. To…
2008-09-22
NA Displacement (cc) 1357 6468 Operating speeds (rpm) 800 – 3000 1500 – 3400 IMEP range (bar) 5 – 27 2 – 10 Boost system Shop air Turbocharger ...Council Diesel Fuel Workshop. Pickett, L.M. and Hoogterp, L., “ Fundamental Spray and Combustion Measurements of JP-8 at Diesel Conditions”, SAE...N., 1981, "Transient Performance Simulation and Analysis of Turbocharged Diesel Engines", SAE Paper 810338.
The Sixth Annual Workshop on Space Operations Applications and Research (SOAR 1992)
NASA Technical Reports Server (NTRS)
Krishen, Kumar (Editor)
1993-01-01
This document contains papers presented at the Space Operations, Applications, and Research Symposium (SOAR) hosted by the U.S. Air Force (USAF) on 4-6 Aug. 1992 and held at the JSC Gilruth Recreation Center. The symposium was cosponsored by the Air Force Material Command and by NASA/JSC. Key technical areas covered during the symposium were robotic and telepresence, automation and intelligent systems, human factors, life sciences, and space maintenance and servicing. The SOAR differed from most other conferences in that it was concerned with Government-sponsored research and development relevant to aerospace operations. The symposium's proceedings include papers covering various disciplines presented by experts from NASA, the USAF, universities, and industry.
NEAR ROADWAY RESEARCH IN THE ATMOSPHERIC MODELING DIVISION
This is a presentation to the CRC Mobile Source Air Toxics Workshop in Phoenix, AZ, on 23 October 2006. The presentation provides an overview of air quality modeling research in the USEPA/ORD/NERL's Atmospheric Modeling Division, with an emphasis on near-road pollutant character...
Aeronautical technology 2000: A projection of advanced vehicle concepts
NASA Technical Reports Server (NTRS)
1985-01-01
The Aeronautics and Space Engineering Board (ASEB) of the National Research Council conducted a Workshop on Aeronautical Technology: a Projection to the Year 2000 (Aerotech 2000 Workshop). The panels were asked to project advances in aeronautical technologies that could be available by the year 2000. As the workshop was drawing to a close, it became evident that a more comprehensive investigation of advanced air vehicle concepts than was possible in the limited time available at the workshop would be valuable. Thus, a special panel on vehicle applications was organized. In the course of two meetings, the panel identified and described representative types of aircraft judged possible with the workshop's technology projections. These representative aircraft types include: military aircraft; transport aircraft; rotorcraft; extremely high altitude aircraft; and transatmospheric aircraft. Improvements in performance, efficiency, and operational characteristics possible through the application of the workshop's year 2000 technology projections were discussed. The subgroups also identified the technologies considered essential and enhancing or supporting to achieve the projected aircraft improvements.
Environmental risk assessment of CRT and PCB workshops in a mobile e-waste recycling plant.
Song, Qingbin; Zeng, Xianlai; Li, Jinhui; Duan, Huabo; Yuan, Wenyi
2015-08-01
The mobile e-waste recycling equipment was chosen as the object of this study, including manual dismantling, mechanical separation of cathode ray tubes (CRTs), and printed circuit boards (PCBs) in the two independent workshops. To determine the potential environmental contamination, the noise, the heavy metals (Cu, Cd, Pb), and the environmental impacts of the e-waste recycling processes in the two workshops of the mobile plant have been evaluated in this paper. This study determined that when control measures are employed, the noise within the two workshops (<80 dB) will meet the national standards. In the CRT workshop, Pb was the most polluting metal, with 2.3 μg/m(3) and 10.53 mg/g in the air and floor dust, respectively. The result of a health risk assessment shows that noncancerous effects are possible for Pb (hazard index (HI) = 3.54 in the CRT workshop and HI = 1.27 in the PCB workshop). The carcinogenic risks to workers for Cd are relatively light in both the workshops. From the results of life cycle assessment (LCA), it can be seen that there was an environmental benefit from the e-waste recycling process as a whole.
Workshop on Fuzzy Control Systems and Space Station Applications
NASA Technical Reports Server (NTRS)
Aisawa, E. K. (Compiler); Faltisco, R. M. (Compiler)
1990-01-01
The Workshop on Fuzzy Control Systems and Space Station Applications was held on 14-15 Nov. 1990. The workshop was co-sponsored by McDonnell Douglas Space Systems Company and NASA Ames Research Center. Proceedings of the workshop are presented.
NASA Astrophysics Data System (ADS)
Urquhart, M. L.; Hairston, M. R.; Richardson, J. M.; Olson, C.
2003-12-01
We will present the Education and Public Outreach work in progress for the joint Air Force/NASA project CINDI (Coupled Ion Neutral Dynamic Investigation), which will launch in early 2004 on a US Air Force C/NOFS (Communications/Navigations Outage Forecast System) Satellite. CINDI, in conjunction with the other instruments on C/NOFS, will study how radio signals sent through the ionosphere are affected by variability with this layer of the atmosphere. The Educational outreach for CINDI is focused on helping students, educators, and the general public better understand the link between the ionosphere and our technological civilization. The ionosphere is typically neglected in pre-college science classes despite its impact on modern society and the substantial resources invested by funding agencies on furthering our understanding of this atmospheric layer. Our approach is to increase student understanding of the terrestrial ionosphere and Sun-Earth connections through strong connections to existing pre-college curricula and standards. We have created a partnership between the William B. Hanson Center for Space Sciences and the Science Education Program within the University of Texas at Dallas (UTD) to produce a quality Educator Guide and a Summer Educator Workshop. A senior graduate student in physics and an experienced middle school educator in UTD's Science Education Master of Science Teaching Program have been partnered to ensure that our the Educator Guide and Workshop will contain both science and pedagogy, and be easily integrated into secondary science classes. The summer 2004 workshop will be offered in the Dallas area, which has a significant population of minority and economically disadvantaged students. We will recruit teachers from districts that serve a large number of underserved/underrepresented students. The Educator Guide and workshop materials will be made available on the CINDI Web site for distribution to a national audience.
“AQMEII Status Update” | Science Inventory | US EPA
“AQMEII Status Update”This presentation provided an overview and status update of the Air Quality Model Evaluation International Initative (AQMEII) to participants of a workshop of the Task Force on Hemispheric Transport of Air Pollution (TF-HTAP) . In addition, the presentation also outlines the objectives and potential timeline for a possible next phase of AQMEII that would involve a collaboration with the current modeling activities of TF-HTAP. The purpose of the presentation was to provide participants at the HTAP meeting with an overview of current AQMEII activities and timelines and to obtain feedback from HTAP workshop participants regarding HTAP timelines. The National Exposure Research Laboratory (NERL) Atmospheric Modeling and Analysis Division (AMAD) conducts research in support of EPA mission to protect human health and the environment. AMAD research program is engaged in developing and evaluating predictive atmospheric models on all spatial and temporal scales for forecasting the air quality and for assessing changes in air quality and air pollutant exposures, as affected by changes in ecosystem management and regulatory decisions. AMAD is responsible for providing a sound scientific and technical basis for regulatory policies based on air quality models to improve ambient air quality. The models developed by AMAD are being used by EPA, NOAA, and the air pollution community in understanding and forecasting not only the magnitude of the air po
Demonstration of no-VOC/no-HAP wood furniture coating system
DOE Office of Scientific and Technical Information (OSTI.GOV)
Huang, E.W.; Guan, R.; McCrillis, R.C.
1997-12-31
The United States Environmental Protection Agency has contracted with AeroVironment Environmental Services, Inc. and its subcontractor, Adhesive Coating Co., to develop and demonstrate a no-VOC (volatile organic compound)/no-HAP (hazardous air pollutant) wood furniture coating system. The objectives of this project are to develop a new wood coating system that is sufficiently mature for demonstration and to develop a technology transfer plan to get the product into public use. The performance characteristics of this new coating system are excellent in terms of adhesion, drying times, gloss, hardness, mar resistance, level of solvents, and stain resistance. Workshops will be held to providemore » detailed information to wood furniture manufacturers on what is required to change to the new coating system. Topics such as spray gun selection, spray techniques, coating repair procedures, drying times and procedures, and spray equipment cleaning materials and techniques will be presented. A cost analysis, including costs of materials, capital outlay, and labor will be conducted comparing costs to finish furniture with the new system to systems currently used. Film performance, coating materials cost per unit production, productivity, manufacturing changes, and emission levels will be compared in the workshops, based on data gathered during the in-plant, full scale demonstrations.« less
1986-08-01
Technology Laboratory, Watertown, MA AIR FORCE BASIC RESEARCH IN DYNAMICS AND CONTROL OF LARGE SPACE STRUCTURES Anthony K. Amos, Boiling Air Force Base...Engineering, Watchun$, NJ TEMPERATURE SHIFT CONSIDERATIONS FOR DAMPING MATERIALS L. Rogers, Air Force Wright Aeronautictl Laboratories, Wright...INDUCED CAVITY ACOUSTICS L.L. Shaw,. Air Force Wr4ht Aeroaauical Laborawrics, Wri•ht-Paucswon AFB. OH i 4i SESSION CHAIRMEN AND COCHAIRMEN 56th Shock and
Next-generation air measurement technologies
This is a presentation at a workshop in Chicago on emerging air monitoring technologies, hosted by a local nonprofit. The audience is composed of a mixture of technical backgrounds. This presentation will be part of an opening panel and the goal is to give an overview of the st...
STRATCOM 8 Data Workshop and supplement
NASA Technical Reports Server (NTRS)
Reed, E. L. (Compiler)
1978-01-01
The STRATCOM-8 effort took place at Holloman Air Force Base and White Sands Missile Range, New Mexico, on September 28-30, 1977. The prime emphasis was on the study of stratospheric photochemistry involving ozone, with secondary objectives including a study of the balloon environment, comparison of independent techniques for the measurement of O3 and NO, and the development of new sensor systems. More than forty sensors were included on the two large balloons, a U-2 aircraft, and several rockets and small balloons, in addition to meteorological balloons and rockets. Most of the systems performed as expected.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hanns-Rudolf, Paur; Cassee, Flemming R.; Teeguarden, Justin G.
The rapid introduction of engineered nanostructured materials into numerous industrial and consumer products will result in enhanced exposure to engineered nanoparticles. Workplace exposure has been identified as the most likely source of uncontrolled inhalation of engineered aerosolized nanoparticles, but release of engineered nanoparticles may occur at any stage of the lifecycle of consumer products. The dynamic development of new nanomaterials with possibly unknown toxicological effects poses a challenge for the assessment of nanoparticle induced toxicity and safety. In this consensus document from a workshop on in-vitro cell systems for nanotoxicity testing an overview is given of the main issues concerningmore » inhalation exposure to nanoparticles, lung physiology, nanoparticle-related biological mechanisms, in-vitro cell exposure systems for nanoparticles and social aspects of nanotechnology. The workshop participants recognized the large potential of in-vitro cell exposure systems for reliable, high-throughput screening of nanotoxicity. For the investigation of pulmonary nanotoxicity, a strong preference was expressed for air-liquid interface (ALI) cell exposure systems (rather than submerged cell exposure systems) as they closely resemble in-vivo conditions in the lungs and they allow for unaltered and dosimetrically accurate delivery of aerosolized nanoparticles to the cells. The members of the workshop believe that further advances in in-vitro cell exposure studies would be greatly facilitated by a more active role of the aerosol scientists. The technical know-how for developing and running ALI in-vitro exposure systems is available in the aerosol community and at the same time biologists/toxicologists are required for proper assessment of the biological impact of nanoparticles.« less
Materials by Design - Computational Alloy Design for Corrosion
2011-02-01
Es = + 0.33 eV Cs Rb K · ~·Ba Sr ::~ \\ H ~ YCd ./ G B FS A~ Zn " Be• ’f_ Ni?.Au SeA. ’\\ . At-v Rh Ru • Zr Ja Mo Tc _,. • • • pt • lr Nb w...Windows Air Conditioning Autoflight Electrical Power Navigation Engine Exhaust Stabilizer Doors Fuel system Nacelles/Pylons Power Plant Equip...p. 14 ASETSDefense 2011: Sustainable Surface Engineering for Aerospace and Defense Workshop Quantum Mechanics Insights into SCC resistance 3.5 -E 0
Odiwe, Anthony I; Adesanwo, Adeyemi T J; Olowoyo, Joshua O; Raimi, Idris O
2014-04-01
The level of air pollution around the automobile mechanic workshops has been generally overlooked. This study, examined the level of trace metals in automobile mechanic workshops and the suitability of using transplanted lichen thalli of Lepraria incana for measuring air pollution in such areas. Samples of the lichen thalli were transplanted into seven different sites and were attached to the bark of trees at each site. The samples were harvested from the sites after 3-month exposure. Concentrations of Pb, Cu, Cd, Fe, Zn, and S content were determined using an atomic absorption spectrophotometer. Results showed that there was a significant difference in the trace metals concentrations across the sites (p < 0.05). The analyzed lichen samples showed a range of 91.26-119.35 ppm for Fe, 30.23-61.32 ppm for Zn, 1.25-2.45 ppm for Cu, 0.017-0.043 ppm for Cd, 0.018-0.051 ppm, and 0.37-0.42 ppm for S. From the study, sites 6 and 7 presented higher concentrations of Cd, Pb, and Zn than other sites. The enrichment factor calculated showed that Zn, Cd, and Pb were greatly enriched from the workshops. The trend in the concentration of these heavy metals suggests that activities in these workshops might become a major source of certain heavy metals in the environment and if the pollution activities persist, it might become worrisome over time.
Lichens as bioindicators of air quality
K. Stolte; D. Mangis; R. Doty; K. Tonnessen; Laurie S. Huckaby
1993-01-01
This report is the result of a workshop held in Denver, Colorado on April 9-11, 1991. It summarizes the current literature and techniques for using lichens to monitor air quality. Experts in lichenology and ecology contributed information on lichen floristics, characterization of monitoring sites, lichen species and communities, identifying lichen species...
Demonstration Aids for Aviation Education [National Aviation Education Workshop].
ERIC Educational Resources Information Center
Federal Aviation Administration (DOT), Washington, DC.
This manual, compiled by a Committee of the Curriculum Laboratory of the Civil Air Patrol, contains 105 demonstrations and activities which can be used to introduce the elementary student to the properties of air as related to aviation, what makes airplanes fly, and the role of weather in aviation. (CP)
Overview of known sources of mercury vapor in buildings: A discussion paper
This brief overview paper is for use at the 2011 International Air Quality Conference to facilitate discussion among participants at the workshop on mercury as an indoor air pollutant of data gaps in source characterization and in related areas related to improved risk assessment...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-09-29
... Justice Interview Room Recording Systems and License Plate Readers Workshop AGENCY: National Institute of Justice. ACTION: Notice of the Interview Room Recording Systems and License Plate Readers Workshops.... The focus of the workshops is the development of NIJ performance standards for Interview Room...
Workshop on Boundary Layer Transition and Unsteady Aspects of Turbomachinery
NASA Technical Reports Server (NTRS)
LaGraff, John E.
2001-01-01
A workshop was organized on the topic of the title and held on August 20-23, 2000 at the Syracuse University Minnowbrook Conference Center in Blue Mountain Lake, New York. Attendance was by invitation only, forty-two guests attended and thirty presentations were made. Support was received from NASA Glenn Research Center, the US Air Force Office of Scientific Research the European Office of Aeronautical Research and Development, the Asian Office of Aeronautical Research and Development and Syracuse University. This workshop was the third in a trienniel series beginning in 1993. A publication under a NASA CP number will be issued and include all abstracts. No full written papers were required. This report includes a list of attendees and the program of presentations. The next workshop is scheduled for August 2003.
Workshop on Transition and Unsteady Aspects of Turbomachinery Flows
NASA Technical Reports Server (NTRS)
LaGraff, John E.
2004-01-01
A workshop was organized on the topic of the title and held on August 17-20, 2003 at the Syracuse University Minnowbrook Conference Center in Blue Mountain Lake, New York. Attendance was by invitation only, 47 guests attended and 30 presentations were made. Support was received from NASA Glenn Research Center, the US Air Force Office of Scientific Research, the European Office of Aeronautical Research and Development, the Asian Office of Aeronautical Research and Development and Syracuse University. This workshop was the fourth in a trienniel series beginning in 1993. A publication under a NASA CP 2004-212913 will be issued and include all abstracts. No full written papers were required. This report includes a list of attendees and the program of presentations. The next workshop is scheduled for August 20-23, 2006.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cadle, S. H.; Ayala, A.; Black, K. N.
2009-02-01
The Coordinating Research Council (CRC) convened its 18th On-Road Vehicle Emissions Workshop March 31-April 2, 2008, with 104 presentations describing the most recent mobile source-related emissions research. In this paper we summarize the presentations from researchers whose efforts are improving our understanding of the contribution of mobile sources to air quality. Participants in the workshop discussed emission models and emissions inventories, results from gas- and particle-phase emissions studies from spark-ignition and diesel-powered vehicles (with an emphasis in this workshop on particle emissions), effects of fuels on emissions, evaluation of in-use emission-control programs, and efforts to improve our capabilities in performingmore » on-board emissions measurements, as well as topics for future research.« less
A NASA-wide approach toward cost-effective, high-quality software through reuse
NASA Technical Reports Server (NTRS)
Scheper, Charlotte O. (Editor); Smith, Kathryn A. (Editor)
1993-01-01
NASA Langley Research Center sponsored the second Workshop on NASA Research in Software Reuse on May 5-6, 1992 at the Research Triangle Park, North Carolina. The workshop was hosted by the Research Triangle Institute. Participants came from the three NASA centers, four NASA contractor companies, two research institutes and the Air Force's Rome Laboratory. The purpose of the workshop was to exchange information on software reuse tool development, particularly with respect to tool needs, requirements, and effectiveness. The participants presented the software reuse activities and tools being developed and used by their individual centers and programs. These programs address a wide range of reuse issues. The group also developed a mission and goals for software reuse within NASA. This publication summarizes the presentations and the issues discussed during the workshop.
ERIC Educational Resources Information Center
Air Force Inst. of Tech., Wright-Patterson AFB, OH.
The purpose of this workshop was to investigate the problems the user faces in using a military library and to develop some methods of overcoming these problems. To provide balanced representation of both users and librarians, outside speakers contributed ideas that were discussed in group meetings. Each group discussed the same major topics,…
Summary of the industry/NASA/FAA workshop on philosophy of automation: Promises and realities
NASA Technical Reports Server (NTRS)
Norman, Susan D.
1990-01-01
Issues of flight deck automation are multi-faceted and complex. The rapid introduction of advanced computer based technology on to the flight deck of transport category aircraft has had considerable impact on both aircraft operations and the flight crew. As part of NASA's responsibility to facilitate an active exchange of ideas and information between members of the aviation community, an Industry/NASA/FAA workshop was conducted in August 1988. One of the most important conclusions to emerge from the workshop was that the introduction of automation has clearly benefited aviation and has substantially improved the operational safety and efficiency of our air transport system. For example, one carrier stated that they have been flying the Boeing 767 (one of the first aircraft to employ substantial automation) since 1982, and they have never had an accident or incident resulting in damage to the aircraft. Notwithstanding its benefits, many issues associated with the design, certification, and operation of automated aircraft were identified. For example two key conceptual issues were the need for the crew to have a thorough understanding of the system and the importance of defining the pilot's role. With respect to certification, a fundamental issue is the lack of comprehensive human factors requirements in the current regulations. Operational considerations, which have been a factor in incidents involving automation, were also cited. Viewgraphs used in the presentation are given.
Role of future scenarios in understanding deep uncertainty in ...
The environment and its interactions with human systems, whether economic, social or political, are complex. Relevant drivers may disrupt system dynamics in unforeseen ways, making it difficult to predict future conditions. This kind of deep uncertainty presents a challenge to organizations faced with making decisions about the future, including those involved in air quality management. Scenario Planning is a structured process that involves the development of narratives describing alternative future states of the world, designed to differ with respect to the most critical and uncertain drivers. The resulting scenarios are then used to understand the consequences of those futures and to prepare for them with robust management strategies. We demonstrate a novel air quality management application of Scenario Planning. Through a series of workshops, important air quality drivers were identified. The most critical and uncertain drivers were found to be “technological development” and “change in societal paradigms.” These drivers were used as a basis to develop four distinct scenario storylines. The energy and emission implications of each storyline were then modeled using the MARKAL energy system model. NOX and SO2 emissions were found to decrease for all scenarios, largely a response to existing air quality regulations. Future-year emissions differed considerably from one scenario to another, however, with key differentiating factors being transition
The release of persistent organic pollutants from a closed system dicofol production process.
Li, Sumei; Tian, Yajing; Ding, Qiong; Liu, Wenbin
2014-01-01
High concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) have been found to be produced in chemical processes in which chlorine is a raw material. Samples of workshop air, waste water, waste acid, and the dicofol product were collected from a pesticide factory in China that uses a closed-system dicofol production process, and were analyzed for PCDD/Fs and ΣDDTs. The ΣDDTs concentrations were 1.88-17.53 μg m(-3) in the workshop air samples, 4.85-456 μg kg(-1) in the waste water and waste acid samples, and 4.74 g kg(-1) in the dicofol product. The total estimated daily intakes of ΣDDTs for workers by inhalation in the workplace were in the range of 0.38-3.51 μg kg(-1)bwd(-1) for moderate activities. The annual amounts of ΣDDTs and p,p'-DDT directly released to the environment via the use of dicofol were 9,480 kg and 1,080 kg, respectively. The PCDD/F toxicity equivalent values (I-TEQs) in the waste water and waste acid samples ranged from 1.5 to 122 pg I-TEQ kg(-1) and 86.3 ng I-TEQ kg(-1) in the dicofol sample. The annual amount of PCDD/Fs released to the environment was 0.17 g I-TEQ. From the PCDD/F distribution patterns, it is suggested that the major pathway for PCDD/F formation involves precursor synthesis during the production of dicofol in the closed-system process. Copyright © 2013 Elsevier Ltd. All rights reserved.
CONTACT: An Air Force technical report on military satellite control technology
NASA Astrophysics Data System (ADS)
Weakley, Christopher K.
1993-07-01
This technical report focuses on Military Satellite Control Technologies and their application to the Air Force Satellite Control Network (AFSCN). This report is a compilation of articles that provide an overview of the AFSCN and the Advanced Technology Program, and discusses relevant technical issues and developments applicable to the AFSCN. Among the topics covered are articles on Future Technology Projections; Future AFSCN Topologies; Modeling of the AFSCN; Wide Area Communications Technology Evolution; Automating AFSCN Resource Scheduling; Health & Status Monitoring at Remote Tracking Stations; Software Metrics and Tools for Measuring AFSCN Software Performance; Human-Computer Interface Working Group; Trusted Systems Workshop; and the University Technical Interaction Program. In addition, Key Technology Area points of contact are listed in the report.
Science Highlights and Lessons Learned from the Atmospheric Infrared Sounder (AIRS)
NASA Technical Reports Server (NTRS)
Pagano, Thomas S.; Fetzer, Eric J.; Suda, Jarrod; Licata, Steve
2011-01-01
The Atmospheric Infrared Sounder (AIRS) and companion instrument, the Advanced Microwave Sounding Unit (AMSU) on the NASA Earth Observing System Aqua spacecraft are facility instruments designed to support measurements of atmospheric temperature, water vapor and a wide range of atmospheric constituents in support of weather forecasting and scientific research in climate and atmospheric chemistry. This paper is an update to the science highlights from a paper by the authors released last year and also looks back at the lessons learned and future needs of the scientific community. These lessons not only include requirements on the measurements, but scientific shortfalls as well. Results from the NASA Science Community Workshop in IR and MW Sounders relating to AIRS and AMSU requirements and concerns are covered and reflect much of what has been learned and what is needed for future atmospheric sounding from Low Earth Orbit.
Evolving Best Practice in Learning About Air Quality and Climate Change Science in ACCENT
NASA Astrophysics Data System (ADS)
Schuepbach, E.
2008-12-01
Learning about air quality and climate change science has developed into a transdisciplinary impact generator, moulded by academic-stakeholder partnerships, where complementary skills and competences lead to a culture of dialogue, mutual learning and decision-making. These sweeping changes are mirrored in the evolving best practice within the European Network of Excellence on Atmospheric Composition Change (ACCENT). The Training and Education Programme in ACCENT pursues an integrated approach and innovative avenues to sharing knowledge and communicating air quality and climate change science to various end-user groups, including teachers, policy makers, stakeholders, and the general public. Early career scientists are involved in the process, and are trained to acquire new knowledge in a variety of learning communities and environments. Here, examples of both the open system of teaching within ACCENT training workshops for early career scientists, and the engagement of non-academic audiences in the joint learning process are presented.
Robbins, L.L.; Coble, P.G.; Clayton, T.D.; Cai, W.J.
2009-01-01
Despite their relatively small surface area, ocean margins may have a significant impact on global biogeochemical cycles and, potentially, the global air-sea fluxes of carbon dioxide. Margins are characterized by intense geochemical and biological processing of carbon and other elements and exchange large amounts of matter and energy with the open ocean. The area-specific rates of productivity, biogeochemical cycling, and organic/inorganic matter sequestration are high in coastal margins, with as much as half of the global integrated new production occurring over the continental shelves and slopes (Walsh, 1991; Doney and Hood, 2002; Jahnke, in press). However, the current lack of knowledge and understanding of biogeochemical processes occurring at the ocean margins has left them largely ignored in most of the previous global assessments of the oceanic carbon cycle (Doney and Hood, 2002). A major source of North American and global uncertainty is the Gulf of Mexico, a large semi-enclosed subtropical basin bordered by the United States, Mexico, and Cuba. Like many of the marginal oceans worldwide, the Gulf of Mexico remains largely unsampled and poorly characterized in terms of its air-sea exchange of carbon dioxide and other carbon fluxes. In May 2008, the Ocean Carbon and Biogeochemistry Scoping Workshop on Terrestrial and Coastal Carbon Fluxes in the Gulf of Mexico was held in St. Petersburg, FL, to address the information gaps of carbon fluxes associated with the Gulf of Mexico and to offer recommendations to guide future research. The meeting was attended by over 90 participants from over 50 U.S. and Mexican institutions and agencies. The Ocean Carbon and Biogeochemistry program (OCB; http://www.us-ocb.org/) sponsored this workshop with support from the National Science Foundation, the National Oceanic and Atmospheric Administration, the National Aeronautics and Space Administration, the U.S. Geological Survey, and the University of South Florida. The goal of the workshop was to bring together researchers from multiple disciplines studying terrestrial, aquatic, and marine ecosystems to discuss the state of knowledge in carbon fluxes in the Gulf of Mexico, data gaps, and overarching questions in the Gulf of Mexico system. The discussions at the workshop were intended to stimulate integrated studies of marine and terrestrial biogeochemical cycles and associated ecosystems that will help to establish the role of the Gulf of Mexico in the carbon cycle and how it might evolve in the face of environmental change. The information derived from the plenary sessions, questions, and recommendations formulated by the participants will drive future research projects. Further discussion of carbon dynamics is needed to address scales of variability, the infrastructure required for study, and the modeling framework for cross-system integration. During the workshop, participants discussed and provided a number of priorities and recommendations, which are listed on p. 2 of the report. Participants recognized that the key to understanding the Gulf of Mexico system requires international collaboration with scientists from countries adjacent to the Gulf of Mexico. Improved collaboration across existing research community boundaries will be critical and should be encouraged by the funding agencies.
Alternate fusion fuels workshop
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1981-06-01
The workshop was organized to focus on a specific confinement scheme: the tokamak. The workshop was divided into two parts: systems and physics. The topics discussed in the systems session were narrowly focused on systems and engineering considerations in the tokamak geometry. The workshop participants reviewed the status of system studies, trade-offs between d-t and d-d based reactors and engineering problems associated with the design of a high-temperature, high-field reactor utilizing advanced fuels. In the physics session issues were discussed dealing with high-beta stability, synchrotron losses and transport in alternate fuel systems. The agenda for the workshop is attached.
The Orbital Workshop Waste Management Compartment
NASA Technical Reports Server (NTRS)
1972-01-01
This image is a wide-angle view of the Orbital Workshop waste management compartment. The waste management facilities presented a unique challenge to spacecraft designers. In addition to collection of liquid and solid human wastes, there was a medical requirement to dry all solid human waste products and to return the residue to Earth for examination. Liquid human waste (urine) was frozen for return to Earth. Total quantities of each astronaut's liquid and solid wastes were precisely measured. Cabin air was drawn into the toilet, shown on the wall at right in this photograph, and over the waste products to generate a flow of the waste in the desired direction. The air was then filtered for odor control and antiseptic purposes prior to being discharged back into the cabin.
NASA Astrophysics Data System (ADS)
Frey, Markus
2015-04-01
The air-snow-sea ice system plays an important role in the global cycling of nitrogen, halogens, trace metals or carbon, including greenhouse gases (e.g. CO2 air-sea flux), and therefore influences also climate. Its impact on atmospheric composition is illustrated for example by dramatic ozone and mercury depletion events which occur within or close to the sea ice zone (SIZ) mostly during polar spring and are catalysed by halogens released from SIZ ice, snow or aerosol. Recent field campaigns in the high Arctic (e.g. BROMEX, OASIS) and Antarctic (Weddell sea cruises) highlight the importance of snow on sea ice as a chemical reservoir and reactor, even during polar night. However, many processes, participating chemical species and their interactions are still poorly understood and/or lack any representation in current models. Furthermore, recent lab studies provide a lot of detail on the chemical environment and processes but need to be integrated much better to improve our understanding of a rapidly changing natural environment. During a 3-day workshop held in Cambridge/UK in October 2013 more than 60 scientists from 15 countries who work on the physics, chemistry or biology of the atmosphere-snow-sea ice system discussed research status and challenges, which need to be addressed in the near future. In this presentation I will give a summary of the main research questions identified during this workshop as well as ways forward to answer them through a community-based interdisciplinary approach.
Workshop in a Box: Sustainable Management of Rural and Small Water and Wastewater Systems Workshops
A resource to help rural and small systems and communities to conduct workshops, either for an individual system or for a group of systems, based on the Rural and Small Systems Guidebook to Sustainable Utility Management.
Military Librarians Workshop: A Premier Gathering of Military Librarians, 1957-1999
2000-06-01
infamous nocturnal entrepreneurs . 70 Lieutenant Colonel George V. Fagan and the U.S.Air Force Academy provided a literal breath of fresh air to those who...presented the keynote address entitled " Millennial Librarianship: Maintaining the Mix and Avoiding the Hype." Crawford proposed that "the libraries of the
Measuring the radon concentration in air meting van de radonconcentratie in lucht
DOE Office of Scientific and Technical Information (OSTI.GOV)
Aten, J.B.T.; Bierhuizen, H.W.J.; Vanhoek, L.P.
1975-01-01
A simple transportable apparatus for measurement of the radon concentration in the air of a workshop was developed. An air sample is sucked through a filter and the decay curve of the alpha activity is measured. The counting speed 40 min after sampling gives an indication of the radon activity. The apparatus was calibrated by analyzing an analogous decay curve obtained with a big filter and a big air sample, the activity being measured with an anti-coincidence counter. (GRA)
1990-10-15
Hyatt Regency Hotel in Denver, Colorado. Invited participants from the Government, universities and private industry offered state-of-the-art...N1AME O MONITORiNG QROR IZATIVN Engineering Mechanics W (W/tb) Air Force Office of Associates, Inc. Scientific Research ISe. ADCRESS (Ctry. Swot &Ad...AFOSR, is also appreciated. Ms. Ellen Marzulio, Meeting Coordinator for the AIAA, handled the pre-workshop publicity and hotel arrangements, as well as
2011-07-01
Orlando, Florida, September 2009, 09F- SIW -090. [HLA (2000) - 1] - Modeling and Simulation Standard - High Level Architecture (HLA) – Framework and...Simulation Interoperability Workshop, Orlando, FL, USA, September 2009, 09F- SIW -023. [MaK] - www.mak.com [MIL-STD-3011] - MIL-STD-3011...Spring Simulation Interoperability Workshop, Norfolk, VA, USA, March 2007, 07S- SIW -072. [Ross] - Ross, P. and Clark, P. (2005), “Recommended
ERIC Educational Resources Information Center
Grinberg, Silvia
2010-01-01
In this article, I offer some reflections on a video documentary workshop for students in the first year of middle school. The workshop, which was held in 2008, took place in a school in an area of extreme urban poverty in the metropolitan area of Buenos Aires, Argentina, specifically in one of the more and more common spaces usually called…
Proceedings of the Real-Time Systems Engineering Workshop
2001-08-01
real - time systems engineering. The workshop was held as part of the SEI Symposium in...Washington, DC, during September 2000. The objective of the workshop was to identify key issues and obtain feedback from attendees concerning real - time systems engineering...and interoperability. This report summarizes the workshop in terms of foundation, management, and technical topics, and it contains a discussion related to developing a community of interest for real - time systems
NASA Technical Reports Server (NTRS)
Robbins, L. L.; Coble, P. G.; Clayton, T. D.; Cai, W. J.
2008-01-01
Despite their relatively small surface area, ocean margins may have a significant impact on global biogeochemical cycles and, potentially, the global air-sea fluxes of carbon dioxide. Margins are characterized by intense geochemical and biological processing of carbon and other elements and exchange large amounts of matter and energy with the open ocean. The area-specific rates of productivity, biogeochemical cycling, and organic/inorganic matter sequestration are high in coastal margins, with as much as half of the global integrated new production occurring over the continental shelves and slopes (Walsh, 1991; Doney and Hood, 2002; Jahnke, in press). However, the current lack of knowledge and understanding of biogeochemical processes occurring at the ocean margins has left them largely ignored in most of the previous global assessments of the oceanic carbon cycle (Doney and Hood, 2002). A major source of North American and global uncertainty is the Gulf of Mexico, a large semi-enclosed subtropical basin bordered by the United States, Mexico, and Cuba. Like many of the marginal oceans worldwide, the Gulf of Mexico remains largely unsampled and poorly characterized in terms of its air-sea exchange of carbon dioxide and other carbon fluxes. The goal of the workshop was to bring together researchers from multiple disciplines studying terrestrial, aquatic, and marine ecosystems to discuss the state of knowledge in carbon fluxes in the Gulf of Mexico, data gaps, and overarching questions in the Gulf of Mexico system. The discussions at the workshop were intended to stimulate integrated studies of marine and terrestrial biogeochemical cycles and associated ecosystems that will help to establish the role of the Gulf of Mexico in the carbon cycle and how it might evolve in the face of environmental change.
Role of future scenarios in understanding deep uncertainty in long-term air quality management.
Gamas, Julia; Dodder, Rebecca; Loughlin, Dan; Gage, Cynthia
2015-11-01
The environment and its interactions with human systems, whether economic, social, or political, are complex. Relevant drivers may disrupt system dynamics in unforeseen ways, making it difficult to predict future conditions. This kind of "deep uncertainty" presents a challenge to organizations faced with making decisions about the future, including those involved in air quality management. Scenario Planning is a structured process that involves the development of narratives describing alternative future states of the world, designed to differ with respect to the most critical and uncertain drivers. The resulting scenarios are then used to understand the consequences of those futures and to prepare for them with robust management strategies. We demonstrate a novel air quality management application of Scenario Planning. Through a series of workshops, important air quality drivers were identified. The most critical and uncertain drivers were found to be "technological development" and "change in societal paradigms." These drivers were used as a basis to develop four distinct scenario storylines. The energy and emissions implications of each storyline were then modeled using the MARKAL energy system model. NOx emissions were found to decrease for all scenarios, largely a response to existing air quality regulations, whereas SO2 emissions ranged from 12% greater to 7% lower than 2015 emissions levels. Future-year emissions differed considerably from one scenario to another, however, with key differentiating factors being transition to cleaner fuels and energy demand reductions. Application of scenarios in air quality management provides a structured means of sifting through and understanding the dynamics of the many complex driving forces affecting future air quality. Further, scenarios provide a means to identify opportunities and challenges for future air quality management, as well as a platform for testing the efficacy and robustness of particular management options across wide-ranging conditions.
Family Systems Training for Medical Students.
Thabrew, Hiran
2018-05-01
To evaluate whether a workshop on family systems delivered to medical students could improve participants' understanding of families from a systemic point of view and help them recognise and address systemic issues that may be affecting their patients. Fifth year (senior) medical students ( n = 36) from the University of Auckland participated in a 90-min workshop about family systems. Pre- and post-workshop, self-reported measures of knowledge and confidence were completed and qualitative feedback was also obtained from participants. The workshop was well received and its interactive and role-play based nature were particularly appreciated. Participants reported gains in all explored areas of knowledge and understanding, suggesting that the workshop met its desired aims. This workshop is an educationally effective and expedient way to equip medical students with some knowledge and understanding about family systems. It may benefit their future work with individual patients and families.
Managing Fatigue in Long Duration Airlift Operations 1994
2001-03-01
Air Force Research Laboratory Brooks Air Force Base, Texas, USA Abstract During September, 1994 the operational tempo for US Air Force C-5 transport...Nandina Terrace, Winter Springs, Fl 32708, USA Paper presented at the RTO HFM Workshop on "The Effect of Prolonged Military Activities in Man...drink. They were drinking lots of coffee and beer and most were eating a gastronomically difficult creation called a jumbo burger. We were given 24 hours
After Globalization Future Security in a Technology Rich World
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gilmartin,T J
2001-08-17
Over the course of the year 2000, five workshops were conducted by the Center for Global Security Research at the Lawrence Livermore National Laboratory on threats to international security in the 2015 to 2020 timeframe due to the global availability of advanced technology. These workshops focused on threats that are enabled by nuclear, missile, and space technology; military technology; information technology; bio technology; and geo systems technology. The participants included US national leaders and experts from the Department of Energy National Laboratories; the Department of Defense: Army, Navy, Air Force, Office of the Secretary of Defense, Defense Threat Reduction Agency,more » and Defense Advanced Research Projects Agency; the Department of State, NASA, Congressional technical staff, the intelligence community, universities and university study centers, think tanks, consultants on security issues, and private industry. For each workshop the process of analysis involved identification and prioritization of the participants' perceived most severe threat scenarios (worst nightmares), discussion of the technologies which enabled those threats, and ranking of the technologies' threat potentials. The threats ranged from local/regional to global, from intentional to unintended to natural, from merely economic to massively destructive, and from individual and group to state actions. We were not concerned in this exercise with defining responses to the threats, although our assessment of each threat's severity included consideration of the ease or difficulty with which it might be executed or countered. At the concluding review, we brought the various workshops' participants together, added senior participant/reviewers with broad experience and national responsibility, and discussed the workshop findings to determine what is most certain or uncertain, and what might be needed to resolve our uncertainties. This paper summarizes the consenses and important variations of both the reviewers and the participants.« less
Cadmium (Tank) Electroplating Alternative
2011-08-01
ASTM F519 HE: 75% NFS 200 hrs HRE : 45% NFS 150 hrs Threshold limit greater than /equal to LHE Cd (AMS 2417G) ASETS Defense Focused Workshop (2011...Test Specimens Reporting Sustained/Threshold load (%NFS), Time to failure. HRE Testing Cd Zn-Ni IVD Al LHE Cd Re-Embrittlement Test Fluids: DI...Hydrogen Embrittlement/ HRE ASTM F519 A5, Type 1.a.1 Brush Plating ASETS Defense Focused Workshop (2011) Luzmarie G. Santiago Materials Engineer Naval Air
Integrating PV in Distributed Grids: Solutions and Technologies Workshop |
Energy Systems Integration Facility | NREL Integrating PV in Distributed Grids: Solutions and Technologies Workshop Integrating PV in Distributed Grids: Solutions and Technologies Workshop In October 2015 (PV) onto the grid. The workshop was held at the Energy Systems Integration Facility. Presenters from
Workshop on the Design of Sustainable Product Systems and Supply Chains; Final Report,
ABOUT THE WORKSHOP The Workshop on the Design of Sustainable Product Systems and Supply Chains was held September 12–13, 2011 at the U.S. National Science Foundation (NSF) offices in Arlington, Virginia. The Workshop was co-sponsored by the U.S. Environmental Protection Agency (...
1983-07-01
space desperately. We have a new building program in the mill which may be many years in coming. Our original library design was for a much larger...pace with and efficiently controlling the dissemination of that information. I would like to say just a word about our School. The vast ma- Jority of...raphy, air ocean science, systems technoloqy orograms In antisubmarine warfare, electronic warfare, and command, control and communications. "-4
In Vitro Exposure Systems and Dosimetry Assessment Tools ...
In 2009, the passing of The Family Smoking Prevention and Tobacco Control Act facilitated the establishment of the FDA Center for Tobacco Products (CTP) and gave it regulatory authority over the marketing, manufacture and distribution of tobacco products, including those termed “modified risk”. On 4-6 April 2016, the Institute for In Vitro Sciences, Inc. (IIVS) convened a workshop conference titled “In Vitro Exposure Systems and Dosimetry Assessment Tools for Inhaled Tobacco Products” to bring together stakeholders representing regulatory agencies, academia, and industry to address the research priorities articulated by the FDA CTP. Specific topics were covered to assess the status of current in vitro smoke and aerosol/vapor exposure systems, as well as the various approaches and challenges to quantifying the complex exposures, in in vitro pulmonary models developed for evaluating adverse pulmonary events resulting from tobacco product exposures. The four core topics covered were, 1) Tobacco Smoke And E-Cigarette Aerosols, 2) Air-Liquid Interface-In Vitro Exposure Systems, 3) Dosimetry Approaches For Particles And Vapors; In Vitro Dosimetry Determinations and 4) Exposure Microenvironment/Physiology Of Cells. The two and a half day workshop included presentations from 20 expert speakers, poster sessions, networking discussions, and breakout sessions which identified key findings and provided recommendations to advance these technologies. Here, we will re
NASA Astrophysics Data System (ADS)
Hara, Toshitsugu
Elementary education program for engineering by the dual system combined with workshop program and teaching program with practical subject was discussed. The dual system which consists of several workshop programs and fundamental subjects (such as mathematics, English and physics) with practical material has been performed for the freshmen. The elementary workshop program (primary course) has four workshops and the related lectures. Fundamental subjects are taught with the practical or engineering texts. English subjects are taught by specified teachers who have ever worked in engineering field with English. The dual system was supported by such systems as the center for success initiative and the English education center.
NASA Astrophysics Data System (ADS)
Urquhart, M. L.; Hairston, M. R.
2005-12-01
Education and Public Outreach (E/PO) targeting pre-college education can be focused on teachers or students, but is ultimately only effective if it impacts classrooms. A challenge in the teacher workshop model is tracking the impact we have actually made. Teachers may be excited by our offerings, and rate workshops highly, but is our E/PO actually making a difference with pre-college students? In June 2005 we ran our second four-day teacher workshop for the joint NASA/U.S. Air Force sponsored ionospheric instrument package, the Coupled Ion Neutral Dynamics Investigation (CINDI) with a new twist. We experimented with the integration of our workshop into a long-term professional development program for 6th and 7th grade teachers at UT Dallas. Immediate direct benefits to the CINDI E/PO program included knowledge of teacher backgrounds prior to the workshop, a narrow target grade level range, and the elimination of the need for separate recruiting efforts. More importantly, by working within a year-long program supported by a Teacher Quality Grant we have been able to better assess teacher learning and the impact our outreach efforts is having on the middle school students of participants. The 20-contact hours our workshop contributed to the Teacher Quality Summer Institute were specifically designed to meet Texas standards for middle school science, and made connections between space weather, Earth systems, basic physics, technology, and communications. Participants were able to interact with members of the science team in formal settings and over casual lunches. We will present our motivations for this experiment, participant feedback, and lessons learned. In addition, we will give an update on our CINDI Educator Guide, and the newly completed Cindi in Space comic book. For the latest on CINDI E/PO, curriculum materials, and the comic book in pdf format, go to http://cindispace.utdallas.edu/education/.
Frontiers in Distributed Optimization and Control of Sustainable Power
Optimization and Control of Sustainable Power Systems Workshop Frontiers in Distributed Optimization and Control of Sustainable Power Systems Workshop In January 2016, NREL's energy systems integration team hosted a workshop on frontiers in distributed optimization and control of sustainable power systems. The
2000 NASA Seal/Secondary Air System Workshop. Volume 1
NASA Technical Reports Server (NTRS)
Steinetz, Bruce M. (Editor); Hendricks, Robert C. (Editor)
2001-01-01
The 2000 NASA Seal/Secondary Air System Workshop covered four main areas: (1) overviews of NASA-sponsored Ultra-Efficient Engine Technology (UEET) and Access to Space Programs, with emphasis on program goals and seal needs; (2) review of turbine engine seal issues from the perspective of end users such as United Airlines; (3) reviews of sealing concepts, test results, experimental facilities, and numerical predictions; and (4) reviews of material development programs relevant to advanced seals development. The NASA UEET overview illustrates for the reader the importance of advanced technologies, including seals, in meeting future engine system efficiency and emission goals. GE, Pratt & Whitney, and Honeywell presented advanced seal development work being performed within their organizations. The NASA-funded GE/Stein Seal team has successfully demonstrated a large (3-ft. diam) aspirating seal that can withstand all anticipated pressures, speeds, and rotor runouts anticipated for a GE90 L.P. turbine balance piston location. GE/Stein Seal are fabricating a full-scale seal to be tested in a GE-90 ground test engine in early 2002. Pratt & Whitney and Stein Seal are investigating carbon seals to accommodate large radial movements anticipated in future geared-fan gearbox locations. Honeywell presented a finger seal design being considered for a high-temperature static combustor location incorporating ceramic finger elements. Successful demonstration of the braided carbon rope thermal barriers to extreme temperatures (5500 F) for short durations provide a new form of very high temperature thermal barrier for future Shuttle solid rocket motor nozzle joints. The X-37, X-38, and future highly reusable launch vehicles pose challenging control surface seal demands that require new seal concepts made from emerging high temperature ceramics and other materials.
Addressing climate challenges in developing countries
NASA Astrophysics Data System (ADS)
Tilmes, Simone; Monaghan, Andrew; Done, James
2012-04-01
Advanced Study Program/Early Career Scientist Assembly Workshop on Regional Climate Issues in Developing Countries; Boulder, Colorado, 19-22 October 2011 The Early Career Scientist Assembly (ECSA) and the Advanced Study Program of the National Center for Atmospheric Research (NCAR) invited 35 early-career scientists from nearly 20 countries to attend a 3-day workshop at the NCAR Mesa Laboratory prior to the World Climate Research Programme (WCRP) Open Science Conference in October 2011. The goal of the workshop was to examine a range of regional climate challenges in developing countries. Topics included regional climate modeling, climate impacts, water resources, and air quality. The workshop fostered new ideas and collaborations between early-career scientists from around the world. The discussions underscored the importance of establishing partnerships with scientists located in typically underrepresented countries to understand and account for the local political, economic, and cultural factors on which climate change is superimposed.
Gwinn, Maureen R; Craig, Jeneva; Axelrad, Daniel A; Cook, Rich; Dockins, Chris; Fann, Neal; Fegley, Robert; Guinnup, David E; Helfand, Gloria; Hubbell, Bryan; Mazur, Sarah L; Palma, Ted; Smith, Roy L; Vandenberg, John; Sonawane, Babasaheb
2011-01-01
Quantifying the benefits of reducing hazardous air pollutants (HAPs, or air toxics) has been limited by gaps in toxicological data, uncertainties in extrapolating results from high-dose animal experiments to estimate human effects at lower doses, limited ambient and personal exposure monitoring data, and insufficient economic research to support valuation of the health impacts often associated with exposure to individual air toxics. To address some of these issues, the U.S. Environmental Protection Agency held the Workshop on Estimating the Benefits of Reducing Hazardous Air Pollutants (HAPs) in Washington, DC, from 30 April to 1 May 2009. Experts from multiple disciplines discussed how best to move forward on air toxics benefits assessment, with a focus on developing near-term capability to conduct quantitative benefits assessment. Proposed methodologies involved analysis of data-rich pollutants and application of this analysis to other pollutants, using dose-response modeling of animal data for estimating benefits to humans, determining dose-equivalence relationships for different chemicals with similar health effects, and analysis similar to that used for criteria pollutants. Limitations and uncertainties in economic valuation of benefits assessment for HAPS were discussed as well. These discussions highlighted the complexities in estimating the benefits of reducing air toxics, and participants agreed that alternative methods for benefits assessment of HAPs are needed. Recommendations included clearly defining the key priorities of the Clean Air Act air toxics program to identify the most effective approaches for HAPs benefits analysis, focusing on susceptible and vulnerable populations, and improving dose-response estimation for quantification of benefits.
Global tropospheric chemistry: Chemical fluexes in the global atmosphere
NASA Technical Reports Server (NTRS)
Lenschow, Donald H. (Editor); Hicks, Bruce B. (Editor)
1989-01-01
In October 1987, NSF, NASA, and NOAA jointly sponsored a workshop at Columbia University to assess the experimental tools and analysis procedures in use and under development to measure and understand gas and particle fluxes across this critical air-surface boundary. Results are presented for that workshop. It is published to summarize the present understanding of the various measurement techniques that are available, identify promising new technological developments for improved measurements, and stimulate thinking about this important measurement challenge.
Proceedings of the Air Force Geophysics Laboratory Workshop on Geomagnetism: April 6-7, 1979.
1979-08-20
CLASSIPICATIO OF TI4 P AGE DR* .. En ,.,d) AECOPI?" CLASSIICAION OF THIS PAGE(whor 0.4. u..dj SECURITY CLASSIFICATION O)F THIS PAGEfWhan D.e. Beefor.d...conditions; (2) obtain an overview of the work being carried out around the world both from the ground based networks and satellite observations; and ( 3 ...reach concensus in the informal workshops as to what analyt- ical and experimental work needs to be done to make significant progress in our 3
NASA Technical Reports Server (NTRS)
Ferber, R. (Editor); Evans, D. (Editor)
1978-01-01
The background, objectives and methodology used for the Small Power Systems Solar Electric Workshop are described, and a summary of the results and conclusions developed at the workshop regarding small solar thermal electric power systems is presented.
1992 NASA Life Support Systems Analysis workshop
NASA Technical Reports Server (NTRS)
Evanich, Peggy L.; Crabb, Thomas M.; Gartrell, Charles F.
1992-01-01
The 1992 Life Support Systems Analysis Workshop was sponsored by NASA's Office of Aeronautics and Space Technology (OAST) to integrate the inputs from, disseminate information to, and foster communication among NASA, industry, and academic specialists. The workshop continued discussion and definition of key issues identified in the 1991 workshop, including: (1) modeling and experimental validation; (2) definition of systems analysis evaluation criteria; (3) integration of modeling at multiple levels; and (4) assessment of process control modeling approaches. Through both the 1991 and 1992 workshops, NASA has continued to seek input from industry and university chemical process modeling and analysis experts, and to introduce and apply new systems analysis approaches to life support systems. The workshop included technical presentations, discussions, and interactive planning, with sufficient time allocated for discussion of both technology status and technology development recommendations. Key personnel currently involved with life support technology developments from NASA, industry, and academia provided input to the status and priorities of current and future systems analysis methods and requirements.
Behrsing, Holger; Hill, Erin; Raabe, Hans; Tice, Raymond; Fitzpatrick, Suzanne; Devlin, Robert; Pinkerton, Kent; Oberdörster, Günter; Wright, Chris; Wieczorek, Roman; Aufderheide, Michaela; Steiner, Sandro; Krebs, Tobias; Asgharian, Bahman; Corley, Richard; Oldham, Michael; Adamson, Jason; Li, Xiang; Rahman, Irfan; Grego, Sonia; Chu, Pei-Hsuan; McCullough, Shaun; Curren, Rodger
2017-07-01
In 2009, the passing of the Family Smoking Prevention and Tobacco Control Act facilitated the establishment of the FDA Center for Tobacco Products (CTP), and gave it regulatory authority over the marketing, manufacture and distribution of tobacco products, including those termed 'modified risk'. On 4-6 April 2016, the Institute for In Vitro Sciences, Inc. (IIVS) convened a workshop conference entitled, In Vitro Exposure Systems and Dosimetry Assessment Tools for Inhaled Tobacco Products, to bring together stakeholders representing regulatory agencies, academia and industry to address the research priorities articulated by the FDA CTP. Specific topics were covered to assess the status of current in vitro smoke and aerosol/vapour exposure systems, as well as the various approaches and challenges to quantifying the complex exposures in in vitro pulmonary models developed for evaluating adverse pulmonary events resulting from tobacco product exposures. The four core topics covered were: a) Tobacco Smoke and E-Cigarette Aerosols; b) Air-Liquid Interface-In Vitro Exposure Systems; c) Dosimetry Approaches for Particles and Vapours/In Vitro Dosimetry Determinations; and d) Exposure Microenvironment/Physiology of Cells. The 2.5-day workshop included presentations from 20 expert speakers, poster sessions, networking discussions, and breakout sessions which identified key findings and provided recommendations to advance these technologies. Here, we will report on the proceedings, recommendations, and outcome of the April 2016 technical workshop, including paths forward for developing and validating non-animal test methods for tobacco product smoke and next generation tobacco product aerosol/vapour exposures. With the recent FDA publication of the final deeming rule for the governance of tobacco products, there is an unprecedented necessity to evaluate a very large number of tobacco-based products and ingredients. The questionable relevance, high cost, and ethical considerations for the use of in vivo testing methods highlight the necessity of robust in vitro approaches to elucidate tobacco-based exposures and how they may lead to pulmonary diseases that contribute to lung exposure-induced mortality worldwide. 2017 FRAME.
Innovative Design of Complex Engineering Systems
NASA Technical Reports Server (NTRS)
Noor, Ahmed K. (Compiler)
2004-01-01
The document contains the proceedings of the training workshop on Innovative Design of Complex Engineering Systems. The workshop was held at the Peninsula Higher Education Center, Hampton, Virginia, March 23 and 24, 2004. The workshop was jointly sponsored by Old Dominion University and NASA. Workshop attendees came from NASA, other government agencies, industry and universities. The objectives of the workshop were to a) provide broad overviews of the diverse activities related to innovative design of high-tech engineering systems; and b) identify training needs for future aerospace work force development in the design area. The format of the workshop included fifteen, half-hour overview-type presentations, a panel discussion on how to teach and train engineers in innovative design, and three exhibits by commercial vendors.
Cadle, Steven H; Gorse, Robert A; Belian, Timothy C; Lawson, Douglas R
1997-03-01
The Coordinating Research Council (CRC) has conducted a series of workshops on real-world vehicle emissions. This article summarizes findings from the most recent research regarding on-road emissions from mobile sources, presented at the CRC workshop held in March 1996. Among the topics discussed were efforts to improve and update emission models, results from field studies designed to understand the contribution of mobile sources to emission inventories, results from gas-and particle-phase emissions studies from in-use motor vehicles, and areas of future research. The Sixth Coordinating Research Council (CRC) On-Road Vehicle Emissions Workshop was held March 18-20, 1996, in San Diego, CA. More than 160 representatives from academia, industry, government, and consulting firms in the United States, Canada, and Europe participated in the three-day meeting. The objective of the Workshop was to present the most recent information from research programs on: mobile source contributions to the emission inventory emission factor models and activity data model comparison and development emission reduction programs new developments in remote sensing studies of on-road vehicle exhaust and non-tailpipe emissions off-cycle Federal Test Procedure (FTP) studies and revisions to the FTP particle emissions from the light- and heavy-duty fleets future research needs Nine sessions were devoted to vehicle emissions models, improvements to the emission inventory, on-road and tunnel studies, off-cycle emissions, non-tailpipe and diesel emissions, emission reduction programs, and remote sensing. Overall workshop coordination was provided by Timothy Belian and the CRC staff, with Steven Cadle and Robert Gorse serving as cochairmen. Individual session chairmen were Brent Bailey (National Renewable Energy Laboratory), Mark Carlock (California Air Resources Board), Harold Haskew (General Motors), Kenneth Knapp and Philip Lorang (U.S. Environmental Protection Agency), Douglas Lawson (Colorado State University), Alan Lloyd (Desert Research Institute), Robert Slott (Shell Oil), and Timothy Truex (University of California, Riverside). In addition, during the Workshop, Lesha Hrynchuk of the California Air Resources Board (CARB) presented a hands-on demonstration using the Internet to obtain motor vehicle emissions information from groups throughout the world. The complete Workshop proceedings are available from the Coordinating Research Council, 219 Perimeter Center Parkway, Atlanta, GA 30346; phone: (770) 396-3400; fax: (770) 396-3404. The following summarizes each session and includes a short synopsis of all the papers that were presented.
An Official American Thoracic Society Workshop Report: Climate Change and Human Health
Pinkerton, Kent E.; Rom, William N.; Akpinar-Elci, Muge; Balmes, John R.; Bayram, Hasan; Brandli, Otto; Hollingsworth, John W.; Kinney, Patrick L.; Margolis, Helene G.; Martin, William J.; Sasser, Erika N.; Smith, Kirk R.; Takaro, Tim K.
2012-01-01
This document presents the proceedings from the American Thoracic Society Climate Change and Respiratory Health Workshop that was held on May 15, 2010, in New Orleans, Louisiana. The purpose of the one-day meeting was to address the threat to global respiratory health posed by climate change. Domestic and international experts as well as representatives of international respiratory societies and key U.S. federal agencies convened to identify necessary research questions concerning climate change and respiratory health and appropriate mechanisms and infrastructure needs for answering these questions. After much discussion, a breakout group compiled 27 recommendations for physicians, researchers, and policy makers. These recommendations are listed under main issues that the workshop participants deemed of key importance to respiratory health. Issues include the following: (1) the health impacts of climate change, with specific focus on the effect of heat waves, air pollution, and natural cycles; (2) mitigation and adaptation measures to be taken, with special emphasis on recommendations for the clinical and research community; (3) recognition of challenges specific to low-resource countries when coping with respiratory health and climate change; and (4) priority research infrastructure needs, with special discussion of international needs for cooperating with present and future environmental monitoring and alert systems. PMID:22421581
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-21
... Policy-Relevant Science to Inform EPA's Integrated Plan for the Review of the Lead National Ambient Air...-Relevant Science to Inform EPA's Integrated Plan for Review of the National Ambient Air Quality Standards... review focuses on the key policy-relevant issues and considers the most meaningful new science to inform...
Advanced Group Support Systems and Facilities
NASA Technical Reports Server (NTRS)
Noor, Ahmed K. (Compiler); Malone, John B. (Compiler)
1999-01-01
The document contains the proceedings of the Workshop on Advanced Group Support Systems and Facilities held at NASA Langley Research Center, Hampton, Virginia, July 19-20, 1999. The workshop was jointly sponsored by the University of Virginia Center for Advanced Computational Technology and NASA. Workshop attendees came from NASA, other government agencies, industry, and universities. The objectives of the workshop were to assess the status of advanced group support systems and to identify the potential of these systems for use in future collaborative distributed design and synthesis environments. The presentations covered the current status and effectiveness of different group support systems.
NASA Technical Reports Server (NTRS)
Oser, H. (Editor); Oro, J. (Editor); Macelroy, R. D. (Editor); Klein, H. P. (Editor); Devincenzi, D. L. (Editor); Young, R. S. (Editor)
1984-01-01
Space-based and space-related research in the life sciences is presented in reviews and reports. Topics examined include the long-term effects of weightlessness, cosmic chemistry and chemical and biological evolution, life-support systems for space travel, planetary protection, and the g-scale factor in gravitational biology. Consideration is given to the role of Ca ions in cytological effects of hypogravity, the organic aerosols of Titan, the role of meteorite impacts in the formation of organic molecules, prebiotic synthesis of purines and pyrimidines, atmosphere behavior of gas-closed mouse-algal systems, air and water regeneration in advanced regenerative environmental-control and life-support systems, and the influence of gravity on the development of animal systems.
NASA-LaRc Flight-Critical Digital Systems Technology Workshop
NASA Technical Reports Server (NTRS)
Meissner, C. W., Jr. (Editor); Dunham, J. R. (Editor); Crim, G. (Editor)
1989-01-01
The outcome is documented of a Flight-Critical Digital Systems Technology Workshop held at NASA-Langley December 13 to 15 1988. The purpose of the workshop was to elicit the aerospace industry's view of the issues which must be addressed for the practical realization of flight-critical digital systems. The workshop was divided into three parts: an overview session; three half-day meetings of seven working groups addressing aeronautical and space requirements, system design for validation, failure modes, system modeling, reliable software, and flight test; and a half-day summary of the research issues presented by the working group chairmen. Issues that generated the most consensus across the workshop were: (1) the lack of effective design and validation methods with support tools to enable engineering of highly-integrated, flight-critical digital systems, and (2) the lack of high quality laboratory and field data on system failures especially due to electromagnetic environment (EME).
1984-07-30
compressing diving air in sub- marines, and AFFF fire extin- guishers. Mr. Nyers ended by saying that not enough informa- tion exists in certain parts of...knowledge and judgement of some of the most outstanding toxicologists at the time. He concluded that the knowledge of toxicology and of air ...pro- cedure. He also mentioned that fire stops will be tried in specific frame bays for 1989 authorization. Since the frame bays are used as air
Off-highway vehicle technology roadmap.
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
2002-02-07
The off-highway sector is under increasing pressure to reduce operating costs (including fuel costs) and to reduce emissions. Recognizing this, the Society of Automotive Engineers and the U.S. Department of Energy (DOE) convened a workshop in April 2001 (ANL 2001) to (1) determine the interest of the off-highway sector (consisting of agriculture, construction, surface mining, inland marine) in crafting a shared vision of off-highway, heavy machines of the future and (2) identify critical research and development (R&D) needs for minimizing off-highway vehicle emissions while cost-effectively maintaining or enhancing system performance. The workshop also enabled government and industry participants to exchangemore » information. During the workshop, it became clear that the challenges facing the heavy, surface-based off-highway sector can be addressed in three major machine categories: (1) engine/aftertreatment and fuels/lubes, (2) machine systems, and (3) thermal management. Working groups convened to address these topical areas. The status of off-highway technologies was determined, critical technical barriers to achieving future emission standards were identified, and strategies and technologies for reducing fuel consumption were discussed. Priority areas for R&D were identified. Given the apparent success of the discussions at the workshop, several participants from industry agreed to help in the formation of a joint industry/government ''roadmap'' team. The U.S. Department of Energy's Office of Heavy Vehicle Technologies has an extensive role in researching ways to make heavy-duty trucks and trains more efficient, with respect to both fuel usage and air emissions. The workshop participants felt that a joint industry/government research program that addresses the unique needs of the off-highway sector would complement the current research program for highway vehicles. With industry expertise, in-kind contributions, and federal government funding (coupled with the resources at the DOE's national laboratories), an effective program can be planned and executed. This document outlines potential technology R&D pathways to greatly reduce emissions from the off-highway sector and yet greatly reduce fuel costs cost-effectively and safely. The status of technology, technical targets, barriers, and technical approaches toward R&D are presented. Program schedule and milestones are included.« less
Aeronautics Technology Possibilities for 2000: Report of a workshop
NASA Technical Reports Server (NTRS)
1984-01-01
The potential of aeronautical research and technology (R&T) development, which could provide the basis for facility planning and long range guidance of R&T programs and could establish justification for support of aeronautical research and technology was studied. The projections served specific purposes: (1) to provide a base for research and future facilities needed to support the projected technologies, and development advanced vehicles; (2) to provide insight on the possible state of the art in aeronautical technology by the year 2000 for civil and military planners of air vehicles and systems. Topics discussed include: aerodynamics; propulsion; structures; materials; guidance, navigation and control; computer and information technology; human factors; and systems integration.
Space Transportation Materials and Structures Technology Workshop. Volume 2; Proceedings
NASA Technical Reports Server (NTRS)
Cazier, Frank W., Jr. (Compiler); Gardner, James E. (Compiler)
1993-01-01
The Space Transportation Materials and Structures Technology Workshop was held on September 23-26, 1991, in Newport News, Virginia. The workshop, sponsored by the NASA Office of Space Flight and the NASA Office of Aeronautics and Space Technology, was held to provide a forum for communication within the space materials and structures technology developer and user communities. Workshop participants were organized into a Vehicle Technology Requirements session and three working panels: Materials and Structures Technologies for Vehicle Systems, Propulsion Systems, and Entry Systems.
Report on Information Systems Workshop (Njiro Hill, Arusha, Tanzania, May 19-31, 1980).
ERIC Educational Resources Information Center
Inganji, Francis, Ed.
With a view to improving information systems and services in Eastern, Central, and Southern Africa, this Information Systems Workshop was organized by the East and Southern African Management Institute (ESAMI) with assistance from the Coordinating Centre for Regional Information Training (CRIT). The specific aims of the workshop were to acquaint…
1988-10-07
from experiments on wet clay minerals by using the EC technique.(3,4) Layer lattice image of fully hydrated tubular halloysite could be clearly observed...in wet air environment. Tubular and spherical halloysite and their hydrazine complexes were observed both in wet air and in vacuum, and their
Study on Circular Complex viewed from Environmental Systems
NASA Astrophysics Data System (ADS)
Takeguchi, Tomoo; Adachi, Katsushige; Yoshikawa, Akira; Hiratsuka, Akira; Tsujino, Ryoji; Iguchi, Manabu
In machining processes, cutting fluids are generally used for cooling and lubricating workpieces at the point cutting. However, these fluids frequently include chlorine, sulfur, phosphorus, or other additives. The chemicals not only become a mist affecting the health of workers engaged in the processing but also make the workshop environment worse. In particular, the chlorine becomes one of the causes of global warming by treating waste oil under high temperature conditions. It is furthermore said that huge cost beyond the purchase cost of oil occurs and dioxins (carcinogen) usually exist in the waste oil. Therefore, an environmentally-friendly cooling-air cutting system is required from the standpoint of green manufacturing. This system has been noted as a technique to solve the issues against the environment mentioned above. In the cooling-air cutting processing, the amount of CO2 emission shows a low value compared with the dry cutting one which uses oil. It is therefore thought that the cooling-air cutting system is a very important processing technique as an environmental countermeasure. At present, in strictly economic and environmental situations, the compatibility of the betterment of production efficiency with the improvement of environment is a subject in the actual spot of a cut processing. This study deals with the test results of cooling-air drilling performance from the viewpoint of taking green manufacturing into account. The workpiece made of die steel SKDll was manufactured by the cooling-air drilling performance at a revolution of 840 rpm and a temperature of -20°C with a high-speed steel drill (SKH56). The results were compared with those for the dry cutting performance. The main results obtained in this study are as follows: 1) The tool life for cooling-air drilling performance was about 6 times as long as that for the dry cutting performance. 2) The chip temperature for cooling-air drilling was 220°C lower than that for the dry cutting performance.
Three Cheers for a New Attitude.
ERIC Educational Resources Information Center
Miller, L. Diane; Labrano, Maureen B.
1992-01-01
Inservice workshop trained fourth- and fifth-grade science specialists and their students organized science demonstrations presented by students from each grade level. Describes demonstrations involving liquid bubbles, magnets, measurement, sound, aerodynamics, environmental protection, and air pollution. (MDH)
2003-02-01
Beam Weld Repair and Qualification of Titanium Fan Blades for Military Gas Turbine Engines”, NATO-RTO-AVT Workshop on Cost Effective Applications of...announced in the Meeting Announcement Research of Extension of the Life Cycle of Helicopter Rotor Blade in Hungary 39 by M. Balaskó, G. Endröczi, J...and Power Systems MP-069(I), February 2003 Low Cost Composite Structures / Cost Effective Application of Titanium Alloys in Military Platforms MP-069
Proceedings of the Fifth NASA/NSF/DOD Workshop on Aerospace Computational Control
NASA Technical Reports Server (NTRS)
Wette, M. (Editor); Man, G. K. (Editor)
1993-01-01
The Fifth Annual Workshop on Aerospace Computational Control was one in a series of workshops sponsored by NASA, NSF, and the DOD. The purpose of these workshops is to address computational issues in the analysis, design, and testing of flexible multibody control systems for aerospace applications. The intention in holding these workshops is to bring together users, researchers, and developers of computational tools in aerospace systems (spacecraft, space robotics, aerospace transportation vehicles, etc.) for the purpose of exchanging ideas on the state of the art in computational tools and techniques.
The Study of Biomass Emissions for Defining Radiative Forcing of Climate
NASA Technical Reports Server (NTRS)
Penner, Joyce; Mishchenko, Michael I. (Technical Monitor)
2003-01-01
Accurate quantification of the amounts of trace gases and particulate matter emitted from vegetation fires and other sources of biomass burning (agricultural waste and biofuels) on a regional and global basis is required by a number of users, including scientists studying a wide range of atmospheric processes, national governments who are required to report greenhouse gas emissions, and those interested in quantifying the sources of air pollution that affect human health at regional scales. Over the past decade, improvements in the ability to detect and map fires using a number of different satellite systems have been achieved, largely through efforts coordinated through working groups organized by the IGBP Data and Information System and Global Observation of Forest Cover (GOFC) projects. In addition, significant advances and improvement in or understanding of the emissions factors for biomass burning in different biomes has resulted through efforts by the Biomass Burning Experiment (BIBEX) organized through the International Global Atmospheric Chemistry project. A number of satellite-based fire data products have been generated, and a number of new products will shortly be available. These new data products will provide the basis for estimating emissions from biomass burning on a global basis. However, a number of issues remain concerning the availability of other data sets needed to generate these estimates. Recognizing these issues, the GOFC-Fire Satellite Validation Workshop (held in Lisbon, Portugal on 9-11 July 2001), recommended that a workshop focusing on Improving Global Estimates of Atmospheric Emissions from Biomass Burning be organized. This workshop was held from 17- 19 July 2002 on the campus of the University of Maryland, College Park, Maryland. This workshop served as the annual meeting of the GOFC/GOLD-Fire Program. The overall goals of the meeting were to review the information products generated from satellite imagery and other sources that are currently available for developing emission estimates from biomass burning, evaluate areas where improved or additional products would be beneficial, and recommend products for use by the atmospheric science community.
DOT National Transportation Integrated Search
1997-02-05
The National Automated Highway System Consortium (NAHSC), ITS America and the American Association of State Highway & Transportation Officials (AASHTO) co-sponsored a two-day workshop in Washington, DC on February 5-6, 1997 to examine the liability i...
Nondeterministic Approaches and Their Potential for Future Aerospace Systems
NASA Technical Reports Server (NTRS)
Noor, Ahmed K. (Compiler)
2001-01-01
This document contains the proceedings of the Training Workshop on Nondeterministic Approaches and Their Potential for Future Aerospace Systems held at NASA Langley Research Center, Hampton, Virginia, May 30-3 1, 2001. The workshop was jointly sponsored by Old Dominion University's Center for Advanced Engineering Environments and NASA. Workshop attendees were from NASA, other government agencies, industry, and universities. The objectives of the workshop were to give overviews of the diverse activities in nondeterministic approaches, uncertainty management methodologies, reliability assessment and risk management techniques, and to identify their potential for future aerospace systems.
Successes and Challenges for Flow Control Simulations
NASA Technical Reports Server (NTRS)
Rumsey, Christopher L.
2008-01-01
A survey is made of recent computations published for synthetic jet flow control cases from a CFD workshop held in 2004. The three workshop cases were originally chosen to represent different aspects of flow control physics: nominally 2-D synthetic jet into quiescent air, 3-D circular synthetic jet into turbulent boundarylayer crossflow, and nominally 2-D flow-control (both steady suction and oscillatory zero-net-mass-flow) for separation control on a simple wall-mounted aerodynamic hump shape. The purpose of this survey is to summarize the progress as related to these workshop cases, particularly noting successes and remaining challenges for computational methods. It is hoped that this summary will also by extension serve as an overview of the state-of-the-art of CFD for these types of flow-controlled flow fields in general.
Recruiting student in Sciences in Rural Environment: The Air Pollution Workshop
NASA Astrophysics Data System (ADS)
Kubatova, A.; Pedersen, D.
2011-12-01
The number of students in sciences is declining and thus it is critical to employ a variety of initiatives to familiarize students with various topics in sciences as well as the university environment. In particular, this is a challenge in rural communities where many students do not have easy access to university campuses. Therefore, we have implemented a workshop for junior and senior high school students. We decided to run this workshop on the campus, as this provided not only exposure of the students to scientific and lecturing facilities, but also to life at the university. Holding the workshop on the university campus also enabled faculty and graduate students from several departments to participate, thus allowing for presentation of a wide variety of topics within atmospheric sciences. Our experiences with the continuously growing workshops - from 50 to 180 participating students - will be shared. Participants were students from both rural and urban areas. These workshops, therefore, contributed to our outreach and service to the local community and to students coming from the rural communities of the upper Midwest and Western states. The workshops are organized annually over the spring break, thus ensuring availability of facilities on the campus. The one-day workshop includes a short cycle of presentations focused on the characterization of atmospheric PM and several critical issues connected with it. The expert faculty members from several departments involved in such research present on global warming, air pollution, aerosol formation, measurement using an aircraft, the relation of emissions and energy production, and on modeling of atmospheric processes. This lecture series (each no longer than 15 min) was broken down by fun demonstrations to break the ice and attract students' attention. Following the presentations, students participated in demonstrations performed in the Chemistry Department. The demonstrations included several hands-on activities, starting with simple experiments such as making a cloud in a bottle, chromatography of marker colors, or conversion of dry ice to gas. These "easy" experiments provided explanation of fundamental principles for more scientifically oriented demonstrations including aerosol number concentration measurements, analysis of wood smoke using gas chromatography. The facilitators were mainly graduate students and postdoctoral fellows from the Chemistry Department. These people came from various countries, thus providing a diverse environment strongly appreciated by visiting students. The effectiveness of the workshop was evaluated through a series of pre- and post- surveys providing feedback on organization as well as on learning experiences given to students and teachers. The detailed results from the survey analysis will be reported. In general we were impressed by the current knowledge and interest of students coming to the workshop, suggesting that the decreasing number of students in the sciences may not be due to lack of knowledge or interest. In addition, we consider the workshop to be a success story based on the teachers who are bringing students back every year. The important features of the workshop, such as economical feasibility and details on organization and structure, will be discussed.
AMBIENT AIR QUALITY MONITORING
The primary objective of this workshop is to exchange information on available scientific bases for environmental regulatory decision making to senior Chinese decision-makers in a readily understandable format in order to expedite appropriate control measures in China. The Pol...
2003 JOINT EPA/SAE-ESSC WORKSHOP: ENVIRONMENTAL SYSTEMS DECISION MAKING
This is a report of a workshop held mid-August of 2002 at Northwestern University,
Evanton, IL to explore what it takes to make a decision regarding environmental systems in the US. The participants in the workshop represented federal government, industry, non-governmental or...
Workshop proceedings: Information Systems for Space Astrophysics in the 21st Century, volume 1
NASA Technical Reports Server (NTRS)
Cutts, James (Editor); Ng, Edward (Editor)
1991-01-01
The Astrophysical Information Systems Workshop was one of the three Integrated Technology Planning workshops. Its objectives were to develop an understanding of future mission requirements for information systems, the potential role of technology in meeting these requirements, and the areas in which NASA investment might have the greatest impact. Workshop participants were briefed on the astrophysical mission set with an emphasis on those missions that drive information systems technology, the existing NASA space-science operations infrastructure, and the ongoing and planned NASA information systems technology programs. Program plans and recommendations were prepared in five technical areas: Mission Planning and Operations; Space-Borne Data Processing; Space-to-Earth Communications; Science Data Systems; and Data Analysis, Integration, and Visualization.
Exposure to episodic air pollution in the Czech Republic has been associated with abnormal semen quality and sperm DNA damage (EHP 108:887;2000). A subsequent longitudinal study evaluated semen from 36 men sampled up to 7 times over a period of two years to capture exposures dur...
AF Cr(VI) Minimize Roadmap: Phase 1 Results
2010-12-01
Environmental Technology Technical Symposium & Workshop, 30 Nov ? 2 Dec 2010, Washington, DC. Sponsored by SERDP and ESTCP. 14. ABSTRACT Hexavalent chromium ...unclassified c. THIS PAGE unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 Minimizing Hexavalent Chromium Use in DoD...Operations Technical Session No. 2B C-40 CURRENT STATE OF AIR FORCE HEXAVALENT CHROMIUM REDUCTION EFFORTS MR. CARL PERAZZOLA Air Force Corrosion
DOE Office of Scientific and Technical Information (OSTI.GOV)
Coddington, M.; Kroposki, B.; Basso, T.
Effectively interconnecting high-level penetration of photovoltaic (PV) systems requires careful technical attention to ensuring compatibility with electric power systems. Standards, codes, and implementation have been cited as major impediments to widespread use of PV within electric power systems. On May 20, 2010, in Denver, Colorado, the National Renewable Energy Laboratory, in conjunction with the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE), held a workshop to examine the key technical issues and barriers associated with high PV penetration levels with an emphasis on codes and standards. This workshop included building upon results of the Highmore » Penetration of Photovoltaic (PV) Systems into the Distribution Grid workshop held in Ontario California on February 24-25, 2009, and upon the stimulating presentations of the diverse stakeholder presentations.« less
Workshop report: US-China workshop on smart structures and smart systems
NASA Astrophysics Data System (ADS)
Tomizuka, Masayoshi
2006-03-01
A Joint U.S.-China workshop on the topic of Integrated Sensing Systems, Mechatronics and Smart Structures Technologies was held in Jinan, China in October 2005 to evaluate the current status of research and education in the topic areas in the United States and China, to identify critical and strategic research and educational issues of mutual interest, and to identify joint research projects and potential research teams for collaborative research activities. The workshop included a series of presentations by leading researchers and educators from the United States and China and group discussions on the workshop objectives.
1990-02-13
considered with these production processes in a simple photochemical equilibrium calculation , we are able to determine the contribution each makes to the...Hessian matrix of second derivatives (which is required in the Newton-Raphson procedure) by the vector product of the gradient (VJ) and its transpose...was focused on the altitude region 80-250 Km. Papers were presented in the folowing areas: Air Force requirements , physics of density and drag
Proceedings of the 2004 NASA/ONR Circulation Control Workshop, Part 1
NASA Technical Reports Server (NTRS)
Jones, Gregory S. (Editor); Joslin, Ronald D. (Editor)
2005-01-01
As technological advances influence the efficiency and effectiveness of aerodynamic and hydrodynamic applications, designs and operations, this workshop was intended to address the technologies, systems, challenges and successes specific to Coanda driven circulation control in aerodynamics and hydrodynamics. A major goal of this workshop was to determine the 2004 state-of-the-art in circulation control and understand the roadblocks to its application. The workshop addressed applications, CFD, and experiments related to circulation control, emphasizing fundamental physics, systems analysis, and applied research. The workshop consisted of 34 single session oral presentations and written papers that focused on Naval hydrodynamic vehicles (e.g. submarines), Fixed Wing Aviation, V/STOL platforms, propulsion systems (including wind turbine systems), ground vehicles (automotive and trucks) and miscellaneous applications (e.g., poultry exhaust systems and vacuum systems). Several advanced CFD codes were benchmarked using a two-dimensional NCCR circulation control airfoil. The CFD efforts highlighted inconsistencies in turbulence modeling, separation and performance predictions.
Proceedings of the Space Shuttle Sortie Workshop. Volume 1: Policy and system characteristics
NASA Technical Reports Server (NTRS)
1972-01-01
The workshop held to definitize the utilization of the space shuttle is reported, and the objectives of the workshop are listed. The policy papers are presented along with concepts of the space shuttle program, and the sortie workshop.
Poindexter, Brenda B; Feng, Rui; Schmidt, Barbara; Aschner, Judy L; Ballard, Roberta A; Hamvas, Aaron; Reynolds, Anne Marie; Shaw, Pamela A; Jobe, Alan H
2015-12-01
Bronchopulmonary dysplasia is the most common morbidity of prematurity, but the validity and utility of commonly used definitions have been questioned. To compare three commonly used definitions of bronchopulmonary dysplasia in a contemporary prospective, multicenter observational cohort of extremely preterm infants. At 36 weeks postmenstrual age, the following definitions of bronchopulmonary dysplasia were applied to surviving infants with and without imputation: need for supplemental oxygen (Shennan definition), National Institutes of Health Workshop definition, and "physiologic" definition after a room-air challenge. Of 765 survivors assessed at 36 weeks, bronchopulmonary dysplasia was diagnosed in 40.8, 58.6, and 32.0% of infants, respectively, with the Shennan, workshop and physiologic definitions. The number of unclassified infants was lowest with the workshop definition (2.1%) and highest with the physiologic definition (16.1%). After assigning infants discharged home in room air before 36 weeks as no bronchopulmonary dysplasia, the modified Shennan definition compared favorably to the workshop definition, with 2.9% unclassified infants. Newer management strategies with nasal cannula flows up to 4 L/min or more and 0.21 FiO2 at 36 weeks obscured classification of bronchopulmonary dysplasia status in 12.4% of infants. Existing definitions of bronchopulmonary dysplasia differ with respect to ease of data collection and number of unclassifiable cases. Contemporary changes in management of infants, such as use of high-flow nasal cannula, limit application of existing definitions and may result in misclassification. A contemporary definition of bronchopulmonary dysplasia that correlates with respiratory morbidity in childhood is needed. Clinical trial registered with www.clinicaltrials.gov (NCT01435187).
Rocket Based Combined Cycle (RBCC) Propulsion Technology Workshop. Volume 1: Executive summary
NASA Technical Reports Server (NTRS)
Chojnacki, Kent T.
1992-01-01
The goal of the Rocket-Based Combined Cycle (RBCC) Propulsion Technology Workshop was to assess the RBCC propulsion system's viability for Earth-to-Orbit (ETO) transportation systems. This was accomplished by creating a forum (workshop) in which past work in the field of RBCC propulsion systems was reviewed, current technology status was evaluated, and future technology programs in the field of RBCC propulsion systems were postulated, discussed, and recommended.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Komomua, C.; Kroposki, B.; Mooney, D.
2009-01-01
On October 9, 2008, NREL hosted a workshop to provide an opportunity for external stakeholders to offer insights and recommendations on the design and functionality of DOE's planned Energy Systems Infrastructure Facility (ESIF). The goal was to ensure that the planning for the ESIF effectively addresses the most critical barriers to large-scale energy efficiency (EE) and renewable energy (RE) deployment. This technical report documents the ESIF workshop proceedings.
Developing of a New Atmospheric Ionizing Radiation (AIR) Model
NASA Technical Reports Server (NTRS)
Clem, John M.; deAngelis, Giovanni; Goldhagen, Paul; Wilson, John W.
2003-01-01
As a result of the research leading to the 1998 AIR workshop and the subsequent analysis, the neutron issues posed by Foelsche et al. and further analyzed by Hajnal have been adequately resolved. We are now engaged in developing a new atmospheric ionizing radiation (AIR) model for use in epidemiological studies and air transportation safety assessment. A team was formed to examine a promising code using the basic FLUKA software but with modifications to allow multiple charged ion breakup effects. A limited dataset of the ER-2 measurements and other cosmic ray data will be used to evaluate the use of this code.
A stress management workshop improves residents' coping skills.
McCue, J D; Sachs, C L
1991-11-01
We describe the effectiveness of a stress management workshop designed for physicians. Of the 64 medicine, pediatrics, and medicine-pediatrics residents who agreed to participate in the workshop, the 43 who could be freed from clinical responsibilities constituted the intervention group; the 21 residents who could not be freed from clinical responsibilities were asked to be the nonintervention group. The ESSI Stress Systems Instrument and Maslach Burnout Inventory were administered to control subjects and workshop participants 2 weeks before and 6 weeks after the workshop. The half-day workshops taught management of the stresses of medical practice through: (1) learning and practicing interpersonal skills that increase the availability of social support; (2) prioritization of personal, work, and educational demands; (3) techniques to increase stamina and attend to self-care needs; (4) recognition and avoidance of maladaptive responses; and (5) positive outlook skills. Overall, the ESSI Stress Systems Instrument test scores for the workshop participants improved (+1.27), while the nonintervention group's mean scores declined (-0.65). All 21 individual ESSI Stress Systems Instrument scale items improved for the workshop, compared with eight of 21 items for the nonintervention group. The workshop group improved in the Maslach Burnout Inventory emotional exhaustion scale and deteriorated less than the nonintervention group in the depersonalization scale. We conclude that a modest, inexpensive stress management workshop was received positively, and can lead to significant short-term improvement in stress and burnout test scores for medicine and pediatrics residents.
An Array of Ice-Based Observatories for Arctic Studies
NASA Astrophysics Data System (ADS)
Plueddemann, A.; Proshutinsky, A.; Toole, J.; Ashjian, C.; Krishfield, R.; Carmack, E.; Dethloff, K.; Fahrbach, E.; Gascard, J.; Perovich, D.; Pryamikov, S.
2004-12-01
The Arctic Ocean's role in global climate - while now widely appreciated - remains poorly understood. Lack of information about key processes within the oceanic, cryospheric, biologic, atmospheric and geologic disciplines will continue to impede physical understanding, model validation, and climate prediction until a practical observing system is designed and implemented. Requirements, challenges and recommendations for Ice-Based Observatories (IBO?s) for the Arctic Ocean were formulated by workshop participants of an international workshop entitled "Arctic Observing Based on Ice-Tethered Platforms" held at the Woods Hole Oceanographic Institution in Woods Hole, Massachusetts, USA, June 28-30, 2004. The principal conclusion from the workshop was that practical, cost-effective and proven IBO designs presently exist, can be readily extended to provide interdisciplinary observations, and should be implemented expeditiously as part of a coordinated Arctic observing system. Ice-based instrument systems are a proven means of acquiring unattended high quality air, ice, and ocean data from the central Arctic during all seasons. Arctic Change is ongoing and measurements need to begin now. An array of approximately 25-30 IBO units maintained throughout the Arctic Ocean is envisioned to observe the annual and interannual variations of the polar atmosphere-ice-ocean environment. An international body will be required to coordinate the various national programs (eliminate overlap, insure no data holes) and insure compatibility of data and their widespread distribution. A long-term, internationally coordinated logistics plan should be implemented as an essential complement to scientific and technical plans for an IBO array. The 25 years of IABP drift trajectories, existing data climatologies and available numerical simulations should be exploited to derive insight to optimal array design, deployment strategies, sampling intervals, and expected performance of an IBO array. IBO designs should provide accommodation for novel sensors, tomographic receivers, and communication and navigation capabilities for free vehicles. Emerging technologies for Arctic observation should be developed within the framework of an integrated Arctic observing system.
Results from a workshop on research needs for modeling aquifer thermal energy storage systems
NASA Astrophysics Data System (ADS)
Drost, M. K.
1990-08-01
A workshop an aquifer thermal energy storage (ATES) system modeling was conducted by Pacific Northwest Laboratory (PNL). The goal of the workshop was to develop a list of high priority research activities that would facilitate the commercial success of ATES. During the workshop, participants reviewed currently available modeling tools for ATES systems and produced a list of significant issues related to modeling ATES systems. Participants assigned a priority to each issue on the list by voting and developed a list of research needs for each of four high-priority research areas; the need for a feasibility study model, the need for engineering design models, the need for aquifer characterization, and the need for an economic model. The workshop participants concluded that ATES commercialization can be accelerated by aggressive development of ATES modeling tools and made specific recommendations for that development.
Proceedings of the Workshop on Space Telerobotics, volume 1
NASA Technical Reports Server (NTRS)
Rodriguez, G. (Editor)
1987-01-01
These proceedings report the results of a workshop on space telerobotics, which was held at the Jet Propulsion Laboratory, January 20-22, 1987. Sponsored by the NASA Office of Aeronautics and Space Technology (OAST), the Workshop reflected NASA's interest in developing new telerobotics technology for automating the space systems planned for the 1990s and beyond. The workshop provided a window into NASA telerobotics research, allowing leading researchers in telerobotics to exchange ideas on manipulation, control, system architectures, artificial intelligence, and machine sensing. One of the objectives was to identify important unsolved problems of current interest. The workshop consisted of surveys, tutorials, and contributed papers of both theoretical and practical interest. Several sessions were held on the themes of sensing and perception, control execution, operator interface, planning and reasoning, and system architecture.
Proceedings of the Mobile Satellite System Architectures and Multiple Access Techniques Workshop
NASA Technical Reports Server (NTRS)
Dessouky, Khaled
1989-01-01
The Mobile Satellite System Architectures and Multiple Access Techniques Workshop served as a forum for the debate of system and network architecture issues. Particular emphasis was on those issues relating to the choice of multiple access technique(s) for the Mobile Satellite Service (MSS). These proceedings contain articles that expand upon the 12 presentations given in the workshop. Contrasting views on Frequency Division Multiple Access (FDMA), Code Division Multiple Access (CDMA), and Time Division Multiple Access (TDMA)-based architectures are presented, and system issues relating to signaling, spacecraft design, and network management constraints are addressed. An overview article that summarizes the issues raised in the numerous discussion periods of the workshop is also included.
An Australian study to evaluate worker exposure to chrysotile in the automotive service industry.
Yeung, P; Patience, K; Apthorpe, L; Willcocks, D
1999-07-01
A study was conducted in Sydney, Australia, in 1996 to investigate the current exposure levels, control technologies, and work practices in five service garages (four car and one bus), three brake bonding workshops, and one gasket processing workshop. This study formed part of the assessment of chrysotile as a priority existing chemical under the Australian National Industrial Chemicals Notification and Assessment Scheme. A total of 68 (11 personal and 57 area) air samples were collected, in accordance with the Australian standard membrane filter method. Fiber concentrations were determined by the traditional phase contrast microscopy (PCM) method and 16 selected samples were analyzed by the more powerful transmission electron microscopy (TEM). Chrysotile exposure of car mechanics measured by PCM was typically below the reportable detection limit of 0.05 f/mL, irrespective of whether disc brake, drum brake, or clutch was being serviced. These low levels can be attributed to the wet cleaning or aerosol spray methods used in recent years to replace the traditional compressed air jet cleaning. In the three brake shoe relining workshops, task-specific exposure reached up to 0.16 f/mL in the processes of cutting and radius grinding. TEM results were generally higher, due to its higher resolution power. The median diameter on samples taken from the service garages (passenger cars), as determined by TEM, was 0.5-1.0 micron; and was between 0.2-0.5 micron for the brake bonding and gasket processing workshops, while that for the bus service depot was 0.1-0.2 micron. Most of the respirable fibers (84%, mainly forsterite) from the bus service depot were below 0.2 micron in diameter which is the resolution limit of PCM. In the brake bonding and gasket cutting workshops, 34 percent and 44 percent of the chrysotile fibers were below 0.2 micron in diameter.
1990 Fuel oil utilization workshop
DOE Office of Scientific and Technical Information (OSTI.GOV)
McDonald, B.L.; Lange, H.B.; Miller, M.N.
1992-01-01
Following a 1983 EPRI-sponsored workshop on utility boiler problems (EPRI report AP-3753), the Institute has responded to the need for better information on fuel utilization by sponsoring annual utility-focused workshops. This workshop is the sixth in a series of annual events designed to address this need. The objective was to provide utility personnel with an opportunity to exchange information on residual oil use in fossil steam plants. Participants at the 1990 workshop, held in Arlington, Virginia, October 31-November 1, 1990, included 37 representatives from 19 electric utilities, including representatives from Mexico, Canada, and Spain, as well as the Institute demore » Investigaciones Electricas in Mexico. The workshop comprised formal presentations followed by question-and-answer sessions and three 2-hour discussion group sessions. Topics included a water/oil emulsion test summary, a NO{sub x} reduction program, particulate and unburned carbon emissions reductions from oil-fired boilers using combustion promoters, a utility perspective on oil spills, and size distribution and opacity of particulate matter emissions from combustion of residual fuel oils. In addition, participants discussed the development of a coke formation index, instability and compatibility of residual fuel oils, the clean combustion of heavy liquid fuels, toxic air emissions from the combustion of residual fuel oils, H{sub 2}S release from residual fuel oils, and increased reliability of superheater and reheater tubes and headers by optimization of steam-side and gas-side temperatures.« less
Successes and Challenges for Flow Control Simulations
NASA Technical Reports Server (NTRS)
Rumsey, Christopher L.
2008-01-01
A survey is made of recent computations published for synthetic jet flow control cases from a CFD workshop held in 2004. The three workshop cases were originally chosen to represent different aspects of flow control physics: nominally 2-D synthetic jet into quiescent air, 3-D circular synthetic jet into turbulent boundary-layer crossflow, and nominally 2-D flow-control (both steady suction and oscillatory zero-net-mass-flow) for separation control on a simple wall-mounted aerodynamic hump shape. The purpose of this survey is to summarize the progress as related to these workshop cases, particularly noting successes and remaining challenges for computational methods. It is hoped that this summary will also by extension serve as an overview of the state-of-the-art of CFD for these types of flow-controlled flow fields in general.
Potential air pollutant emission from private vehicles based on vehicle route
NASA Astrophysics Data System (ADS)
Huboyo, H. S.; Handayani, W.; Samadikun, B. P.
2017-06-01
Air emissions related to the transportation sector has been identified as the second largest emitter of ambient air quality in Indonesia. This is due to large numbers of private vehicles commuting within the city as well as inter-city. A questionnaire survey was conducted in Semarang city involving 711 private vehicles consisting of cars and motorcycles. The survey was conducted in random parking lots across the Semarang districts and in vehicle workshops. Based on the parking lot survey, the average distance private cars travelled in kilometers (VKT) was 17,737 km/year. The machine start-up number of cars during weekdays; weekends were on average 5.19 and 3.79 respectively. For motorcycles the average of kilometers travelled was 27,092 km/year. The machine start-up number of motorcycles during weekdays and weekends were on average 5.84 and 3.98, respectively. The vehicle workshop survey showed the average kilometers travelled to be 9,510 km/year for motorcycles, while for private cars the average kilometers travelled was 21,347 km/year. Odometer readings for private cars showed a maximum of 3,046,509 km and a minimum of 700 km. Meanwhile, for motorcycles, odometer readings showed a maximum of 973,164 km and a minimum of roughly 54.24 km. Air pollutant emissions on East-West routes were generally higher than those on South-North routes. Motorcycles contribute significantly to urban air pollution, more so than cars. In this study, traffic congestion and traffic volume contributed much more to air pollution than the impact of fluctuating terrain.
NASA Astrophysics Data System (ADS)
Urquhart, M. L.; Curry, B.; Hairston, M. R.
2009-12-01
Professional development for teachers can take a variety of forms, each with unique challenges and needs. At the University of Texas at Dallas (UTD), we have leveraged partnerships between multiple groups including the Masters of Arts in Teaching program in Science Education, the joint US Air Force/NASA CINDI mission, an ionospheric explorer built at UTD, and the UTD Regional Collaborative for Excellence in Science Teaching. Each effort models, and in the case of the later two has created, inquiry-based lessons around Earth-systems science. A space science mission, currently in low Earth orbit aboard the Air Force satellite C/NOFS, provides real world connections to classroom science, scientific data and visualizations, and funding to support delivery of professional development in short courses and workshops at teacher conferences. Workshops and short course in turn often serve to recruit teachers into our longer-term programs. Long-term professional development programs such as the Collaborative provide opportunities to test curriculum and teacher learning, an interface to high-quality sustained efforts within talented communities of teachers, and much more. From the birth of our CINDI Educational Outreach program to the Collaborative project that produced geoscience kit-based modules and associated professional development adopted throughout the state of Texas, we will share highlights of our major professional development initiatives and how our partnerships have enabled us to better serve the needs of K-12 teachers expected to deliver geoscience and space science content in their classrooms.
FLUORINATED SURFACTANTS IN THE GREAT LAKES - YESTERDAY, TODAY, AND TOMORROW
Perfluorooctane surfactants have been reported in biota, water, and air samples worldwide. Despite these reports, the main environmental sources of these compounds remain undefined. As a presentation to the emerging chemicals workshop of the International Joint Commission on Grea...
Urban air pollution and health inequities: a workshop report.
2001-06-01
Over the past three decades, an array of legislation with attendant regulations has been implemented to enhance the quality of the environment and thereby improve the public's health. Despite the many beneficial changes that have followed, there remains a disproportionately higher prevalence of harmful environmental exposures, particularly air pollution, for certain populations. These populations most often reside in urban settings, have low socioeconomic status, and include a large proportion of ethnic minorities. The disparities between racial/ethnic minority and/or low-income populations in cities and the general population in terms of environmental exposures and related health risks have prompted the "environmental justice" or "environmental equity" movement, which strives to create cleaner environments for the most polluted communities. Achieving cleaner environments will require interventions based on scientific data specific to the populations at risk; however, research in this area has been relatively limited. To assess the current scientific information on urban air pollution and its health impacts and to help set the agenda for immediate intervention and future research, the American Lung Association organized an invited workshop on Urban Air Pollution and Health Inequities held 22-24 October 1999 in Washington, DC. This report builds on literature reviews and summarizes the discussions of working groups charged with addressing key areas relevant to air pollution and health effects in urban environments. An overview was provided of the state of the science for health impacts of air pollution and technologies available for air quality monitoring and exposure assessment. The working groups then prioritized research needs to address the knowledge gaps and developed recommendations for community interventions and public policy to begin to remedy the exposure and health inequities.
Urban air pollution and health inequities: a workshop report.
2001-01-01
Over the past three decades, an array of legislation with attendant regulations has been implemented to enhance the quality of the environment and thereby improve the public's health. Despite the many beneficial changes that have followed, there remains a disproportionately higher prevalence of harmful environmental exposures, particularly air pollution, for certain populations. These populations most often reside in urban settings, have low socioeconomic status, and include a large proportion of ethnic minorities. The disparities between racial/ethnic minority and/or low-income populations in cities and the general population in terms of environmental exposures and related health risks have prompted the "environmental justice" or "environmental equity" movement, which strives to create cleaner environments for the most polluted communities. Achieving cleaner environments will require interventions based on scientific data specific to the populations at risk; however, research in this area has been relatively limited. To assess the current scientific information on urban air pollution and its health impacts and to help set the agenda for immediate intervention and future research, the American Lung Association organized an invited workshop on Urban Air Pollution and Health Inequities held 22-24 October 1999 in Washington, DC. This report builds on literature reviews and summarizes the discussions of working groups charged with addressing key areas relevant to air pollution and health effects in urban environments. An overview was provided of the state of the science for health impacts of air pollution and technologies available for air quality monitoring and exposure assessment. The working groups then prioritized research needs to address the knowledge gaps and developed recommendations for community interventions and public policy to begin to remedy the exposure and health inequities. PMID:11427385
Opportunities in Air Force Research and Development: Three Regional Workshop
1982-08-01
BAFB DC 20332-6448 F49620-81-C-0049 J1. SUPPLEMENTARY NOTES 12a. DISTRUITION/iAVAILABLUTY STATEMENT t2A. OISTWILUTION CODE d ~ztr:L . oeasgJ 13. A1STUACT...Mewmwflm 200 waV* J ) conduct, on a regional basis, a series of three one day workshops, convening 300- 400 minority scientists from 19 states, 77...OF ABSTRACT OF REPORT OF THIS PAGE j OF ABSTRACT unc lass ified I unclass ified __ NSN 7540-01-2SSOO Stanaro Form 2" (890104 Draft) ft5VW " A" VidMS89
Automated Guideway Transit Service Availability Workshop
DOT National Transportation Integrated Search
1978-02-01
The workshop consisted of four panel sessions: Service Availability Definitions; Operator Experience in Operational Systems; Theoretical Aspects of AGT Service Availability; and User-Manufacturer Relationships. The workshop presented a wide spectrum ...
Second NASA Workshop on Wiring for Space Applications
NASA Technical Reports Server (NTRS)
1994-01-01
This document contains the proceedings of the Second NASA Workshop on Wiring for Space Applications held at NASA LeRC in Cleveland, OH, 6-7 Oct. 1993. The workshop was sponsored by NASA Headquarters Code QW Office of Safety and Mission Quality, Technical Standards Division and hosted by NASA LeRC, Power Technology Division, Electrical Components and Systems Branch. The workshop addressed key technology issues in the field of electrical power wiring for space applications. Speakers from government, industry, and academia presented and discussed topics on arc tracking phenomena, wiring system design, insulation constructions, and system protection. Presentation materials provided by the various speakers are included in this document.
Seventh Annual Workshop on Space Operations Applications and Research (SOAR 1993), volume 2
NASA Technical Reports Server (NTRS)
Krishen, Kumar (Editor)
1994-01-01
This document contains papers presented at the Space Operations, Applications and Research Symposium (SOAR) Symposium hosted by NASA/Johnson Space Center (JSC) and cosponsored by NASA/JSC and U.S. Air Force Materiel Command. SOAR included NASA and USAF programmatic overviews, plenary session, panel discussions, panel sessions, and exhibits. It invited technical papers in support of U.S. Army, U.S. Navy, Department of Energy, NASA, and USAF programs in the following areas: robotics and telepresence, automation and intelligent systems, human factors, life support, and space maintenance and servicing. SOAR was concerned with Government-sponsored research and development relevant to aerospace operations.
Fourth NASA Workshop on Computational Control of Flexible Aerospace Systems, part 2
NASA Technical Reports Server (NTRS)
Taylor, Lawrence W., Jr. (Compiler)
1991-01-01
A collection of papers presented at the Fourth NASA Workshop on Computational Control of Flexible Aerospace Systems is given. The papers address modeling, systems identification, and control of flexible aircraft, spacecraft and robotic systems.
Applied Information Systems Research Program Workshop
NASA Technical Reports Server (NTRS)
Bredekamp, Joe
1991-01-01
Viewgraphs on Applied Information Systems Research Program Workshop are presented. Topics covered include: the Earth Observing System Data and Information System; the planetary data system; Astrophysics Data System project review; OAET Computer Science and Data Systems Programs; the Center of Excellence in Space Data and Information Sciences; and CASIS background.
PROCEEDINGS OF THE CROSS DISCIPLINE ECOSYTEM MODELING AND ANALYSIS WORKSHOP
The complexity of environmental problems we face now and in the future is ever increasing. Process linkages among air, land, surface and subsurface water require interdisciplinary modeling approaches. The dynamics of land use change spurred by population and economic growth, ...
Past Seminars and Workshops | Energy Systems Integration Facility | NREL
Distributed Optimization and Control of Sustainable Power Systems Workshop Integrating PV in Distributed Grids Unintentional Islands in Power Systems with Distributed Resources Webinar Smart Grid Educational Series Energy
Proceedings : Direct Fixation Fastener Workshop
DOT National Transportation Integrated Search
1985-06-01
This report is a collection of papers and discussion transcripts from a workshop on direct fixation fastener systems (DFFS) that are increasingly being used in the construction of modern rail transit systems and system extensions. Preservice testing,...
PV Module Reliability Workshop | Photovoltaic Research | NREL
-year old PV system in Quebec, Canada-Alex Bradley, Tanya Dhir, Yves Poissant Solar panel design factors PV Module Reliability Workshop PV Module Reliability Workshop Tuesday, February 24, 2015 Chair : Michael Kempe The 2015 PV Module Reliability Workshop (PVMRW) continued in the tradition of this annual
Proceedings of the NASA First Wake Vortex Dynamic Spacing Workshop
NASA Technical Reports Server (NTRS)
Creduer, Leonard (Editor); Perry, R. Brad (Editor)
1997-01-01
A Government and Industry workshop on wake vortex dynamic spacing systems was conducted on May 13-15, 1997, at the NASA Langley Research Center. The purpose of the workshop was to disclose the status of ongoing NASA wake vortex R&D to the international community and to seek feedback on the direction of future work to assure an optimized research approach. Workshop sessions examined wake vortex characterization and physics, wake sensor technologies, aircraft/wake encounters, terminal area weather characterization and prediction, and wake vortex systems integration and implementation. A final workshop session surveyed the Government and Industry perspectives on the NASA research underway and related international wake vortex activities. This document contains the proceedings of the workshop including the presenters' slides, the discussion following each presentation, the wrap-up panel discussion, and the attendees' evaluation feedback.
Lichens as bioindicators of air quality. Forest Service general technical report (Final)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Stolte, K.; Doty, R.; Mangis, D.
1993-03-01
The report is the result of a workshop held in Denver, Colorado on April 9-11, 1991. It summarizes the current literature and techniques for using lichens to monitor air quality. Experts in lichenology and ecology contributed information on lichen floristics, characterization of monitoring sites, lichen species and communities, identifying lichen species sensitive to pollutants, active monitoring with transplants, chemical analysis of lichens, and case studies as examples of lichen biomonitoring scenarios.
Very High Load Capacity Air Bearing Spindle for Large Diamond Turning Machines
2010-06-08
testing and a surplus air bearing rotary table has been located. A prototype spindle has been designed to work with the table. 15. SUBJECT TERMS...MSFC) • PROTOTYPE SPINDLE DESIGN June 8, 2010Mirror Technology Workshop 3 Introduction • DT is a proven method of manufacturing aspheric off-axis... designed to hold in a strain-free condition. This spindle development is aimed at producing 3 meter diameter components. This requirement results in the
ERIC Educational Resources Information Center
Lavy, Ilana; Yadin, Aharon
2010-01-01
The present study was carried out within a systems analysis and design workshop. In addition to the standard analysis and design tasks, this workshop included practices designed to enhance student capabilities related to non-technical knowledge areas, such as critical thinking, interpersonal and team skills, and business understanding. Each task…
NASA Technical Reports Server (NTRS)
1974-01-01
The design and development of the Skylab Orbital Workshop are discussed. The subjects considered are: (1) thrust attitude control system, (2) solar array system, (3) electrical power distribution system, (4) communication and data acquisition system, (5) illumination system, and (6) caution and warning system.
Cui, Ru; Ma, Yong-Liang
2013-12-01
Based on the EPA method T0-11 and 14/15 for measurement of toxic organics in air samples, fast VOCs detector, Summa canister and DNPH absorbent were used to determine the VOCs concentrations and the compositions in the ambient air of the workshops for different processes as well as the emission concentration in the exhaust gas. In all processes that involved VOCs release, concentrations of total VOCs in the workshops were 0.1-0.5 mg x m(-3), 1.5-2.5 mg x m(-3) and 20-200 mg x m(-3) for casting, cutting and painting respectively. Main compositions of VOCs in those workshops were alkanes, eneynes, aromatics, ketones, esters and ethers, totally over 20 different species. The main compositions in painting workshop were aromatics and ketones, among which the concentration of benzene was 0.02-0.34 mg x m(-3), toluene was 0.24-3.35 mg x m(-3), ethyl benzene was 0.04-1.33 mg x m(-3), p-xylene was 0.13-0.96 mg x m(-3), m-xylene was 0.02-1.18 mg x m(-3), acetone was 0.29-15.77 mg x m(-3), 2-butanone was 0.06-22.88 mg x m(-3), cyclohexene was 0.02-25.79 mg x m(-3), and methyl isobutyl ketone was 0-21.29 mg x m(-3). The VOCs emission from painting process was about 14 t x a(-1) for one single manufacturing line, and 840 t x a(-1) for the whole factory. According to the work flows and product processes, the solvent used during painting process was the main source of VOCs emission, and the exhaust gas was the main emission point.
Research Frontiers in Bioinspired Energy: Molecular-Level Learning from Natural Systems: A Workshop
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zolandz, Dorothy
An interactive, multidisciplinary, public workshop, organized by a group of experts in biochemistry, biophysics, chemical and biomolecular engineering, chemistry, microbial metabolism, and protein structure and function, was held on January 6-7, 2011 in Washington, DC. Fundamental insights into the biological energy capture, storage, and transformation processes provided by speakers was featured in this workshop which included topics such as microbes living in extreme environments such as hydrothermal vents or caustic soda lakes (extremophiles) provided a fascinating basis for discussing the exploration and development of new energy systems. Breakout sessions and extended discussions among the multidisciplinary groups of participants in themore » workshop fostered information sharing and possible collaborations on future bioinspired research. Printed and web-based materials that summarize the committee's assessment of what transpired at the workshop were prepared to advance further understanding of fundamental chemical properties of biological systems within and between the disciplines. In addition, webbased materials (including two animated videos) were developed to make the workshop content more accessible to a broad audience of students and researchers working across disciplinary boundaries. Key workshop discussion topics included: Exploring and identifying novel organisms; Identifying patterns and conserved biological structures in nature; Exploring and identifying fundamental properties and mechanisms of known biological systems; Supporting current, and creating new, opportunities for interdisciplinary education, training, and outreach; and Applying knowledge from biology to create new devices and sustainable technology.« less
The 2nd NASA Aerospace Pyrotechnic Systems Workshop
NASA Technical Reports Server (NTRS)
St.Cyr, William W. (Compiler)
1994-01-01
This NASA Conference Publication contains the proceedings of the Second NASA Aerospace Pyrotechnics Systems Workshop held at Sandia National Laboratories, Albuquerque, New Mexico, February 8-9, 1994. The papers are grouped by sessions: (1) Session 1 - Laser Initiation and Laser Systems; (2) Session 2 - Electric Initiation; (3) Session 3 - Mechanisms & Explosively Actuated Devices; (4) Session 4 - Analytical Methods and Studies; and (5) Session 5 - Miscellaneous. A sixth session, a panel discussion and open forum, concluded the workshop.
1991 NASA Life Support Systems Analysis workshop
NASA Technical Reports Server (NTRS)
Evanich, Peggy L.; Crabb, Thomas M.; Gartrell, Charles F.
1992-01-01
The 1991 Life Support Systems Analysis Workshop was sponsored by NASA Headquarters' Office of Aeronautics and Space Technology (OAST) to foster communication among NASA, industrial, and academic specialists, and to integrate their inputs and disseminate information to them. The overall objective of systems analysis within the Life Support Technology Program of OAST is to identify, guide the development of, and verify designs which will increase the performance of the life support systems on component, subsystem, and system levels for future human space missions. The specific goals of this workshop were to report on the status of systems analysis capabilities, to integrate the chemical processing industry technologies, and to integrate recommendations for future technology developments related to systems analysis for life support systems. The workshop included technical presentations, discussions, and interactive planning, with time allocated for discussion of both technology status and time-phased technology development recommendations. Key personnel from NASA, industry, and academia delivered inputs and presentations on the status and priorities of current and future systems analysis methods and requirements.
10th European Zebrafish Meeting 2017, Budapest: Husbandry Workshop Summary.
Oltová, Jana; Barton, Carrie; Certal, Ana Catarina; Argenton, Francesco; Varga, Zoltán M
2018-01-02
A husbandry workshop on July 3, 2017, at the 10th European Zebrafish Meeting in Budapest, Hungary (July 3-July 7, 2017), focused on the standardization, optimization, and streamlining of fish facility procedures. Standardization can be achieved for example by developing novel software and hardware tools, such as a fish facility database for husbandry and environmental facility management (Zebrabase, Oltova), or a hand-held, air-pressurized fish feeder for consistent food distribution (Blowfish, Argenton). Streamlining is achieved when work hours are reduced, as with the standardized fish feeder, or by limiting the number and types of fish diets and observing the effect on animal welfare and performance (Barton). Testing the characteristics of new fish diets and observing whether they produce better experimental outcomes (Certal) optimizes diets and improves fish productivity. Collectively, the workshop presentations emphasized how consistency and harmonization of husbandry procedures within and across aquatic facilities yield reproducible scientific outcomes.
Photovoltaic Performance and Reliability Workshop summary
NASA Astrophysics Data System (ADS)
Kroposki, Benjamin
1997-02-01
The objective of the Photovoltaic Performance and Reliability Workshop was to provide a forum where the entire photovoltaic (PV) community (manufacturers, researchers, system designers, and customers) could get together and discuss technical issues relating to PV. The workshop included presentations from twenty-five speakers and had more than one hundred attendees. This workshop also included several open sessions in which the audience and speakers could discuss technical subjects in depth. Several major topics were discussed including: PV characterization and measurements, service lifetimes for PV devices, degradation and failure mechanisms for PV devices, standardization of testing procedures, AC module performance and reliability testing, inverter performance and reliability testing, standardization of utility interconnect requirements, experience from field deployed systems, and system certification.
Seventh International Workshop on Microgravity Combustion and Chemically Reacting Systems. Rev. 1
NASA Technical Reports Server (NTRS)
Sacksteder, Kurt (Compiler)
2003-01-01
The Seventh International Workshop on Microgravity Combustion and Chemically Reacting Systems was planned for June 3-6, 2003, in Cleveland, Ohio, near the NASA John H. Glenn Research Center at Lewis Field. The new name for the workshop is based on the decision to broaden our scope to encompass support for future space exploration through basic and applied research in reacting systems that in some cases may not look like combustion. The workshop has been lengthened to 4 days with focus sessions on spacecraft fire safety and exploration-related research. We believe that the microgravity combustion science community is almost uniquely positioned to make substantial contributions to this new effort.
4. Credit BG. View looking northwest at Control and Recording ...
4. Credit BG. View looking northwest at Control and Recording Center 4221/E-22, as seen from Test Stand 'C' tower. The Test Stand 'C' workshop 4213/E-14 appears at lower left of the image. To the south of 4221/E-22 lies Blower House No. 2, Building 4226/E-27, used for ventilating the tunnel system which connected 4221/E-22 to all test stands. At the southeast corner of 4221/E-22 is the Booster Pumping Station, Building 4227/E-28. To the northwest of 4221/E-22 is a Water Storage Tank, Building 4289/E-90 which supplies the water and firefighting systems at the JPL Edwards facility. - Jet Propulsion Laboratory Edwards Facility, Control & Recording Center, Edwards Air Force Base, Boron, Kern County, CA
Proceedings TSC workshop on attitudinal surveys for transportation planning and evaluation
DOT National Transportation Integrated Search
1975-11-01
The major conclusions of the Workshop on Attitudinal Surveys : for Transportation Planning and Evaluation held at the Transpor : tation Systems Center on January 30, 1975 are presented. : The Workshop participants, including transportation planners, ...
Proceedings from the Texas ITS data uses and archiving workshop
DOT National Transportation Integrated Search
1999-03-01
The "Texas ITS Data Uses and Archiving Workshop" was held November 10, 1998, in Austin, Texas, to : discuss issues and opportunities related to archiving data from intelligent transportation systems (ITS). The : workshop participants represented seve...
The CLEAN Workshop Series: Promoting Effective Pedagogy for Teaching Undergraduate Climate Science
NASA Astrophysics Data System (ADS)
Kirk, K. B.; Bruckner, M. Z.; Manduca, C. A.; Buhr, S. M.
2012-12-01
To prepare students to understand a changing climate, it is imperative that we equip educators with the best possible tools and methods for reaching their audience. As part of the Climate Literacy and Energy Awareness Network (CLEAN) professional development efforts, two workshops for undergraduate faculty were held in 2012. These workshops used a variety of activities to help faculty learn about recent climate research, take part in demonstrations of successful activities for teaching climate topics, and collaborate to create new teaching materials. The workshops also facilitated professional networking among participants. Both workshops were held online, eliminating the need for travel, encouraging participants without travel funds to attend, and allowing international collaborations and presentations. To create an authentic experience, the workshop used several technologies such as the Blackboard Collaborate web conferencing platform, SERC's web-based collaboration tools and online discussion threads, and conference calls. The workshop Communicating Climate Science in the Classroom, held in April 2012, explored practices for communicating climate science and policy in the classroom and provided strategies to improve student understanding of this complex and sensitive topic. Workshop presentations featured public opinion research on Americans' perceptions of climate change, tactics for identifying and resolving student misconceptions, and methods to address various "backfire effects" that can result from attempts to correct misinformation. Demonstrations of teaching approaches included a role-playing simulation of emissions negotiations, Princeton's climate stabilization wedges game, and an activity that allows students to use scientific principles to tackle misinformation. The workshop Teaching Climate Complexity was held in May 2012. Teaching the complexities of climate science requires an understanding of many facets of the Earth system and a robust pedagogic approach that fosters systems thinking. Workshop participants heard presentations from top climate scientists about topics such as the role of carbon dioxide in regulating Earth's climate, the silicate-weathering thermostat hypothesis, effects of water vapor in the climate system, and albedo effects from the loss of Artic sea ice. Demonstrations of classroom techniques allowed participants to use a jigsaw approach to understand poleward heat transport, plot atmospheric carbon dioxide concentrations, and use a mass balance model to explore the role of carbon dioxide in Earth's atmosphere. A hallmark of the CLEAN workshops is that participants are actively engaged in team projects to create new teaching materials. In the Communicating Climate workshop, John Cook led a demonstration of techniques featured in his Debunking Handbook and workshop participants created examples of how to respond to common climate myths in the classroom. In the Climate Complexities workshop, participants used existing elements within the CLEAN reviewed collection to create a comprehensive sequence of activities that can be used to teach elements of Earth's climate system. Activities from the workshop are archived on the CLEAN website, including screen cast recordings of all the presentations and materials created at each workshop. For more information, visit the workshop website at the URL below.
ERIC Educational Resources Information Center
Simon, Hans-Reiner
Written in German, this report summarizes a workshop on teaching and research activities in information science that was held at the City University, London, and attended by faculty and students from the university's Department of Information Science and H.-R. Simon of the GID (Gesellschaft fur Information und Dokumentation), Frankfort am Main,…
DOT National Transportation Integrated Search
1979-10-01
This document is a record of the joint FAA/NASA Workshop on Wake Vortex Alleviation and Avoidance conducted at the DOT Transportation Systems Center, November 28-29, 1978. The workshop was sponsored by the Federal Aviation Administration to apprise t...
ERIC Educational Resources Information Center
Daniels, Mindy A.
2012-01-01
The purpose of this case study was to compare the pedagogical and affective efficiency and efficacy of creative prose fiction writing workshops taught via asynchronous computer-mediated online distance education with creative prose fiction writing workshops taught face-to-face in order to better understand their operational pedagogy and…
Proceedings of the Workshop on Identification and Control of Flexible Space Structures, Volume 2
NASA Technical Reports Server (NTRS)
Rodriguez, G. (Editor)
1985-01-01
The results of a workshop on identification and control of flexible space structures held in San Diego, CA, July 4 to 6, 1984 are discussed. The main objectives of the workshop were to provide a forum to exchange ideas in exploring the most advanced modeling, estimation, identification and control methodologies to flexible space structures. The workshop responded to the rapidly growing interest within NASA in large space systems (space station, platforms, antennas, flight experiments) currently under design. Dynamic structural analysis, control theory, structural vibration and stability, and distributed parameter systems are discussed.
Community reporting of ambient air polychlorinated biphenyl concentrations near a Superfund site.
Tomsho, Kathryn S; Basra, Komal; Rubin, Staci M; Miller, Claire B; Juang, Richard; Broude, Sylvia; Martinez, Andres; Hornbuckle, Keri C; Heiger-Bernays, Wendy; Scammell, Madeleine K
2017-10-27
In this manuscript, we describe the process of establishing partnerships for community-based environmental exposure research, the tools and methods implemented for data report-back to community members, and the results of evaluations of these efforts. Data discovery and report-back materials developed by Statistics for Action (SFA) were employed as the framework to communicate the environmental data to community members and workshops. These data communication and research translation efforts are described in detail and evaluated for effectiveness based on feedback provided from community members who attended the workshops. Overall, the methods were mostly effective for the intended data communication.
Workshop on Mercury: Space Environment, Surface, and Interior
NASA Technical Reports Server (NTRS)
2001-01-01
This volume contains abstracts that have been accepted for presentation at the Workshop on Mercury: Space Environment, Surface, and Interior, October 4-5, 2001. The Scientific Organizing Committee consisted of Mark Robinson (Northwestern University), Marty Slade (Jet Propulsion Laboratory), Jim Slavin (NASA Goddard Space Flight Center), Sean Solomon (Carnegie Institution), Ann Sprague (University of Arizona), Paul Spudis (Lunar and Planetary Institute), G. Jeffrey Taylor (University of Hawai'i), Faith Vilas (NASA Johnson Space Center), Meenakshi Wadhwa (The Field Museum), and Thomas Watters (National Air and Space Museum). Logistics, administrative, and publications support were provided by the Publications and Program Services Departments of the Lunar and Planetary Institute.
Open-Ended Evolution: Perspectives from the OEE Workshop in York.
Taylor, Tim; Bedau, Mark; Channon, Alastair; Ackley, David; Banzhaf, Wolfgang; Beslon, Guillaume; Dolson, Emily; Froese, Tom; Hickinbotham, Simon; Ikegami, Takashi; McMullin, Barry; Packard, Norman; Rasmussen, Steen; Virgo, Nathaniel; Agmon, Eran; Clark, Edward; McGregor, Simon; Ofria, Charles; Ropella, Glen; Spector, Lee; Stanley, Kenneth O; Stanton, Adam; Timperley, Christopher; Vostinar, Anya; Wiser, Michael
2016-01-01
We describe the content and outcomes of the First Workshop on Open-Ended Evolution: Recent Progress and Future Milestones (OEE1), held during the ECAL 2015 conference at the University of York, UK, in July 2015. We briefly summarize the content of the workshop's talks, and identify the main themes that emerged from the open discussions. Two important conclusions from the discussions are: (1) the idea of pluralism about OEE-it seems clear that there is more than one interesting and important kind of OEE; and (2) the importance of distinguishing observable behavioral hallmarks of systems undergoing OEE from hypothesized underlying mechanisms that explain why a system exhibits those hallmarks. We summarize the different hallmarks and mechanisms discussed during the workshop, and list the specific systems that were highlighted with respect to particular hallmarks and mechanisms. We conclude by identifying some of the most important open research questions about OEE that are apparent in light of the discussions. The York workshop provides a foundation for a follow-up OEE2 workshop taking place at the ALIFE XV conference in Cancún, Mexico, in July 2016. Additional materials from the York workshop, including talk abstracts, presentation slides, and videos of each talk, are available at http://alife.org/ws/oee1 .
Proceedings from the Texas ITS data uses and archiving workshop : draft
DOT National Transportation Integrated Search
1999-03-01
The "Texas ITS Data Uses and Archiving Workshop" was held November 10, 1998, in Austin, Texas, to discuss issues and opportunities related to archiving data from intelligent transportation systems (ITS). The workshop participants represented several ...
DOT National Transportation Integrated Search
2016-10-14
Milestones Since Last Workshop - Finalized GPS/GNSS receiver test plan and test procedures - Coordinated government and manufacturer participation and executed Non-Disclosure Agreements (NDAs) - Developed/validated radiated RF test environment - Carr...
Evaluation of NASA Data Products for RPO Applications
NASA Technical Reports Server (NTRS)
Frisbie, Troy; Knowlton, Kelly; Andrews, Jane
2005-01-01
This presentation summarizes preliminary investigations at SSC by NASA's ASD in Air Quality including decision support tools, partner plans, working groups, and committees. An overview of follow-on short-term and long-term objectives is also provided. A table of potential NASA sensors for use with air quality applications is included, along with specifications for MODIS 04 and 06 products. This presentation was originally given by Rich Piorot of the Vermont Department of Environmental Conservation - Air Quality as part of a round-table discussion during "Exploring Collaborative Opportunities in Air Quality Monitoring, Modelling and Communication Workshop" in Boulder, CO, on March 21-22, 2005; verbal consent for this presentation to be provided to Mr. Piorot was given by the NASA SSC ASD Air Quality Program Manager on March 14, 2005.
Advanced Grid Control Technologies Workshop Series | Energy Systems
on advanced distribution management systems (ADMS) and microgrid controls. The workshops were held at . July 7, 2015: Advanced Distribution Management Systems (ADMS) Welcome and NREL Overview Dr. Murali Keynote: Next-Generation Distribution Management Systems and Distributed Resource Energy Management
2011 Agile (Scrum) Workshop Held in Baltimore, Maryland on November 14-15, 2011
2011-11-15
have success- fully implemented Agile Development within DoD. SUSI MCKEE OC2IS Program Manager, U.S. Air Force Susana V. McKee has 25 years of DoD T...AGILE WILL WORK IN DOD: THREE EXAMPLES u Ms. Kelly Goshorn, Patriot Excalibur (PEX) Program Manager, U.S. Air Force u Ms. Susi McKee, Operational...OPS PEX Team: Internal •Devs/SMEs/Testers •Architecture Committee •Etc. none Future implementation, not Current release Big R/ Little r I n
1989-01-01
England while waiting for an outbreak of cold air (Larson, 1988). Even before the arrival of the storm trailing the cold air behind it, both shear and...and simulation of storm -induced mixed-layer deepening. J. Phys. Oceanogr., 8. 582-599. 217 Riley, J.J., and R.W. Metcalf: 1987. Direct numerical...the severe downslope wind storm which occurs in the lee of major mountain barriers (Lilly and Kennedy, 1973: Lilly. 1978) under suitable atmospheric
Air Force Command and Control: The Need for Increased Adaptability
2012-07-01
will support the CSAF’s agenda at CORONA South (2011).6 On 30 November–1 December 2010, AFRI conducted the Air- power Command and Control Workshop at...organization below the CCDR level. The most common type of subtheater organization is a JTF. 6. CORONA South was held February 2011 at Offutt AFB...Action Team ( CAT ) did not have a requirement to track Guard members that were not in a Title 10 status.20 The state’s initial response to the
Cong, Xiaowei; Xu, Xijin; Xu, Long; Li, Minghui; Xu, Cheng; Qin, Qilin; Huo, Xia
2018-06-01
Air pollution is a risk factor for cardiovascular disease (CVD), and cardiovascular regulatory changes in childhood contribute to the development and progression of cardiovascular events at older ages. The aim of the study was to investigate the effect of air pollutant exposure on the child sympatho-adrenomedullary (SAM) system, which plays a vital role in regulating and controlling the cardiovascular system. Two plasma biomarkers (plasma epinephrine and norepinephrine) of SAM activity and heart rate were measured in preschool children (n = 228) living in Guiyu, and native (n = 104) and non-native children (n = 91) living in a reference area (Haojiang) for >1 year. Air pollution data, over the 4-months before the health examination, was also collected. Environmental PM 2.5 , PM 10 , SO 2 , NO 2 and CO, plasma norepinephrine and heart rate of the e-waste recycling area were significantly higher than for the non-e-waste recycling area. However, there was no difference in plasma norepinephrine and heart rate between native children living in the non-e-waste recycling area and non-native children living in the non-e-waste recycling area. PM 2.5 , PM 10 , SO 2 and NO 2 data, over the 30-day and the 4-month average of pollution before the health examination, showed a positive association with plasma norepinephrine level. PM 2.5 , PM 10 , SO 2 , NO 2 and CO concentrations, over the 24 h of the day of the health examination, the 3 previous 24-hour periods before the health examination, and the 24 h after the health examination, were related to increase in heart rate. At the same time, plasma norepinephrine and heart rate on children in the high air pollution level group (≤50-m radius of family-run workshops) were higher than those in the low air pollution level group. Our results suggest that air pollution exposure in e-waste recycling areas could result in an increase in heart rate and plasma norepinephrine, implying e-waste air pollutant exposure impairs the SAM system in children. Copyright © 2018 Elsevier Ltd. All rights reserved.
Johns, Douglas O.; Walker, Katherine; Benromdhane, Souad; Hubbell, Bryan; Ross, Mary; Devlin, Robert B.; Costa, Daniel L.; Greenbaum, Daniel S.
2012-01-01
Objectives: The U.S. Environmental Protection Agency is working toward gaining a better understanding of the human health impacts of exposure to complex air pollutant mixtures and the key features that drive the toxicity of these mixtures, which can then be used for future scientific and risk assessments. Data sources: A public workshop was held in Chapel Hill, North Carolina, 22–24 February 2011, to discuss scientific issues and data gaps related to adopting multipollutant science and risk assessment approaches, with a particular focus on the criteria air pollutants. Expert panelists in the fields of epidemiology, toxicology, and atmospheric and exposure sciences led open discussions to encourage workshop participants to think broadly about available and emerging scientific evidence related to multipollutant approaches to evaluating the health effects of air pollution. Synthesis: Although there is clearly a need for novel research and analytical approaches to better characterize the health effects of multipollutant exposures, much progress can be made by using existing scientific information and statistical methods to evaluate the effects of single pollutants in a multipollutant context. This work will have a direct impact on the development of a multipollutant science assessment and a conceptual framework for conducting multipollutant risk assessments. Conclusions: Transitioning to a multipollutant paradigm can be aided through the adoption of a framework for multipollutant science and risk assessment that encompasses well-studied and ubiquitous air pollutants. Successfully advancing methods for conducting these assessments will require collaborative and parallel efforts between the scientific and environmental regulatory and policy communities. PMID:22645280
University and Local Government in Metropolitan Environmental Management
ERIC Educational Resources Information Center
Laffite, Nicolas Baya
2008-01-01
This article addresses the role of universities in the sustainable management of metropolitan areas, drawing on the outputs from a workshop that brought together academics, professionals and politicians responsible for the urban environmental management of the metropolitan areas of Buenos Aires, Argentina, and Sao Paulo, Brazil. Urban…
MINING IMPACTED PIT LAKES 2000 WORKSHOP PROCEEDINGS: A MULTIMEDIA CD PRESENTATION
Anthropogenic releases of mercury to air, water and land have adversely impacted human health and the environment for many years. The USEPA Program Offices including: OPPTS, OAR, OW, OSWER, and ORD have made commitments to enhancing government, industry and public awareness of th...
INTEGRATING LAND USE, TRANSPORTATION, AND AIR QUALITY MODELING
The following are highlights of the project, covering the full project period from September 16, 2004 to the completion of the project September 15, 2008:
The U.S. Centers for Disease Control and Prevention (CDC) established the Environmental Public Health Tracking (EPHT) program to support state and local projects to compile, link, analyze, and disseminate environmental and health data thereby engaging stakeholders and guiding act...
Retraining Teachers in Physics.
ERIC Educational Resources Information Center
McGervey, John D.; Heckathorn, Dick
1990-01-01
Provides an inservice workshop experience for underprepared physics or physical science teachers. Describes a demonstration showing conservation of momentum using an air track, gliders, and a model railway train. Includes a brief introduction to demonstrations of Newton's second law, scattering of laser light, and the effect of a telescope on…
Space Transportation Materials and Structures Technology Workshop. Volume 1: Executive summary
NASA Technical Reports Server (NTRS)
Cazier, F. W., Jr. (Compiler); Gardner, J. E. (Compiler)
1992-01-01
The workshop was held to provide a forum for communication within the space materials and structures technology developer and user communities. Workshop participants were organized into a Vehicle Technology Requirements session and three working panels: Materials and Structures Technologies for Vehicle Systems; Propulsion Systems; and Entry Systems. The goals accomplished were (1) to develop important strategic planning information necessary to transition materials and structures technologies from lab research programs into robust and affordable operational systems; (2) to provide a forum for the exchange of information and ideas between technology developers and users; and (3) to provide senior NASA management with a review of current space transportation programs, related subjects, and specific technology needs. The workshop thus provided a foundation on which a NASA and industry effort to address space transportation materials and structures technologies can grow.
Safety of Highway-Railroad Grade Crossings : Research Needs Workshop. Volume 2. Appendices.
DOT National Transportation Integrated Search
1996-01-01
The John A. Volpe National Transportation Systems Center hosted and conducted the Highway-Railroad Grade Crossing Safety Research Needs Workshop on April 10 - 13, 1995. Seventy-five delegates participated in the workshop and identified ninety-two (92...
Proceedings : Workshop on Tunnel Lining Design, March 12 & 13, 1979
DOT National Transportation Integrated Search
1979-12-01
This report documents the proceedings of the Workshop on Tunnel Lining Design that was held at the U.S. Department of Transportation's Transportation Systems Center (TSC) in Cambridge, Massachusetts, on March 12 and 13, 1979. The workshop was sponsor...
Applying the systems engineering approach to video over IP projects : workshop.
DOT National Transportation Integrated Search
2011-12-01
In 2009, the Texas Transportation Institute produced for the Texas Department of Transportation a document : called Video over IP Design Guidebook. This report summarizes an implementation of that project in the : form of a workshop. The workshop was...
The Space and Earth Science Data Compression Workshop
NASA Technical Reports Server (NTRS)
Tilton, James C. (Editor)
1993-01-01
This document is the proceedings from a Space and Earth Science Data Compression Workshop, which was held on March 27, 1992, at the Snowbird Conference Center in Snowbird, Utah. This workshop was held in conjunction with the 1992 Data Compression Conference (DCC '92), which was held at the same location, March 24-26, 1992. The workshop explored opportunities for data compression to enhance the collection and analysis of space and Earth science data. The workshop consisted of eleven papers presented in four sessions. These papers describe research that is integrated into, or has the potential of being integrated into, a particular space and/or Earth science data information system. Presenters were encouraged to take into account the scientists's data requirements, and the constraints imposed by the data collection, transmission, distribution, and archival system.
Developing Students' Understanding of Complex Systems in the Geosciences (Invited)
NASA Astrophysics Data System (ADS)
Manduca, C. A.; Mogk, D. W.; Bice, D. M.; Pyle, E.; Slotta, J.
2010-12-01
Developing a systems perspective is a commonly cited goal for geosciences courses and programs. This perspective is a powerful tool for critical thinking, problem solving and integrative thinking across and beyond the sciences. In April 2010, a NSF funded ‘On the Cutting Edge’ workshop brought together 45 geoscience faculty, education and cognitive science researchers, and faculty from other STEM and social science disciplines that make use of a complex systems approach. The workshop participants focused on understanding the challenges inherent in developing an understanding of complex systems and the teaching strategies currently in use across the disciplines. These include using models and visualizations to allow students to experiment with complex systems, using projects and problems to give students experience with data and observations derived from a complex system, and using illustrated lectures and discussions and analogies to illuminate the salient aspects of complex systems. The workshop website contains a collection of teaching activities, instructional resources and courses that demonstrate these approaches. The workshop participants concluded that research leading to a clear articulation of what constitutes understanding complex system behavior is needed, as are instruments and performance measures that could be used to assess this understanding. Developing the ability to recognize complex systems and understand their behavior is a significant learning task that cannot be achieved in a single course. Rather it is a type of literacy that should be taught in a progression extending from elementary school to college and across the disciplines. Research defining this progression and its endpoints is needed. Full information about the workshop, its discussions, and resulting collections of courses, activities, references and ideas are available on the workshop website.
NASA Astrophysics Data System (ADS)
Reynaerts, Dominiek; Vullers, Ruud
2011-10-01
This special section of Journal of Micromechanics and Microengineering features papers selected from the 10th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2010). The workshop was organized in Leuven, Belgium from 30 November to 3 December 2010 by Katholieke Universiteit Leuven and the imec/Holst Centre. This was a special PowerMEMS Workshop, for several reasons. First of all, we celebrated the 10th anniversary of the workshop: the first PowerMEMS meeting was organized in Sendai, Japan in 2000. None of the organizers or participants of this first meeting could have predicted the impact of the workshop over the next decade. The second reason was that, for the first time, the conference organization spanned two countries: Belgium and the Netherlands. Thanks to the advances in information technology, teams from Katholieke Universiteit Leuven (Belgium) and the imec/Holst Centre in Eindhoven (the Netherlands) have been able to work together seamlessly as one team. The objective of the PowerMEMS Workshop is to stimulate innovation in micro and nanotechnology for power generation and energy conversion applications. Its scope ranges from integrated microelectromechanical systems (MEMS) for power generation, dissipation, harvesting, and management, to novel nanostructures and materials for energy-related applications. True to the objective of the PowerMEMSWorkshop, the 2010 technical program covered a broad range of energy related research, ranging from the nanometer to the millimeter scale, discussed in 5 invited and 52 oral presentations, and 112 posters. This special section includes 14 papers covering vibration energy harvesters, thermal applications and micro power systems. Finally, we wish to express sincere appreciation to the members of the International Steering Committee, the Technical Program Committee and last but not least the Local Organizing Committee. This special issue was edited in collaboration with the staff of IOP Publishing. PowerMEMS 2010 contents Harvesting energy from airflow with a michromachined piezoelectric harvester inside a Helmholtz resonator S P Matova, R Elfrink, R J M Vullers and R van Schaijk Analysis and characterization of triangular electrode structures for electrostatic energy harvestingDaniel Hoffmann, Bernd Folkmer and Yiannos Manoli A smart and self-sufficient frequency tunable vibration energy harvesterC Eichhorn, R Tchagsim, N Wilhelm and P Woias Power output enhancement of a vibration-driven electret generator for wireless sensor applicationsTatsuakira Masaki, Kenji Sakurai, Toru Yokoyama, Masayo Ikuta, Hiroshi Sameshima, Masashi Doi, Tomonori Seki and Masatoshi Oba Harvesting traffic-induced vibrations for structural health monitoring of bridgesT V Galchev, J McCullagh, R L Peterson and K Najafi Dispenser-printed planar thick-film thermoelectric energy generatorsA Chen, D Madan, P K Wright and J W Evans Silicon nanowire arrays as thermoelectric material for a power microgeneratorD Dávila, A Tarancón, M Fernández-Regúlez, C Calaza, M Salleras, A San Paulo and L Fonseca A micro thermal switch with a stiffness-enhanced thermal isolation structureTakashiro Tsukamoto, Masayoshi Esashi and Shuji Tanaka A dielectric liquid contact thermal switch with electrowetting actuationA R McLanahan, C D Richards and R F Richards A self-regulating valve for single-phase liquid cooling of microelectronicsRadu Donose, Michaël De Volder, Jan Peirs and Dominiek Reynaerts A MEMS-enabled 3D zinc-air microbattery with improved discharge characteristics based on a multilayer metallic substructureA Armutlulu, Y Fang, S H Kim, C H Ji, S A Bidstrup Allen and M G Allen Design, fabrication and testing of an air-breathing micro direct methanol fuel cell with compound anode flow fieldLuwen Wang, Yufeng Zhang, Youran Zhao, Zijiang An, Zhiping Zhou and Xiaowei Liu A shadow-mask evaporated pyroMEMS igniterD A de Koninck, D Briand and N F de Rooij Aerodynamic journal bearing with a flexible, damped support operating at 7.2 million DNTobias Waumans, Jan Peirs, Farid Al-Bender and Dominiek Reynaerts Thermoelectric energy harvester on the heated human machineVladimir Leonov
Fly-By-Light/Power-By-Wire Requirements and Technology Workshop
NASA Technical Reports Server (NTRS)
Baker, Robert L. (Editor); Pitts, Felix L. (Editor)
1992-01-01
The results of the Fly-By-Light/Power-By-Wire (FBL/PBW) Workshop held on March 17-19, 1992, at the NASA Langley Research Center are presented. The FBL/PBW program is a joint NASA LeRC/LaRC effort to develop the technology base for confident application of integrated FBL/PBW systems to transport aircraft. The objectives of the workshop were to ascertain the FBL/PBW program technical requirements and satisfy the requirements and needs from the industry viewpoint, provide a forum for presenting and documenting alternative technical approaches which satisfy the requirements, and assess the plan adequacy in accomplishing plan objectives, aims, and technology transfer. Areas addressed were: optical sensor systems, power-by-wire systems, FBL/PBW fault-tolerant architectures, electromagnetic environment assessment, and system integration and demonstration. The workshop consisted of an introductory meeting, a 'keynote' presentation, a series of individual panel sessions covering the above areas, with midway presentations by the panel chairpersons, followed by a final summarizing/integrating session by the individual panels, and a closing plenary session summarizing the results of the workshop.
Impact of Satellite Atmospheric Motion Vectors In the GMAO GEOS-5 Global Data Assimilation System
NASA Technical Reports Server (NTRS)
Gelaro, Ronald; Merkova, Dagmar
2012-01-01
The WMO and THORPEX co-sponsored fifth Workshop on the Impact of Various Observing Systems on Numerical Weather Prediction will be organized by the Expert Team on the Evolution of the Global Observing System in Sedona, Arizona, United States, from 22 to 25 May 2012. Participants are expected to come from all the major NWP centres which are active in the area of impact studies. The workshop will be conducted in English. As for the first four workshops it is planned to produce a workshop report to be published as a WMO Technical Report that will include the papers submitted by the participants. The previous four workshops in this series took place in Geneva {April 1997), Toulouse (March 2000), Alpbach (March 2004) and Geneva (May 2008). Results from Observing System Experiments (OSEs), both with global and regional aspects were presented and conclusions were drawn concerning the contributions of the various components of the observing system to the large scale forecast skill at short and medium range (Workshop Proceedings were published as WMO World Weather Watch Technical Reports TD No. 868, 1034, 1228 and 1450). Since then, some significant changes and developments have affected the global observing system and more efforts have been devoted to meso-scale observing and assimilation systems. There has also been a trend toward using techniques other than OSEs to document data impact, such as adjoint-based sensitivity to observations or ensemble-based sensitivity. Field experiments have been carried out, in particular through the THORPEX project, and the use of targeted data has been assessed.
Credit WCT. Photographic copy of photograph, view looking south down ...
Credit WCT. Photographic copy of photograph, view looking south down easternmost tunnel axis during second phase of JPL tunnel construction in 1959. Reinforced concrete formwork for Test Stand "D" foundation appears in left foreground. Formwork for Building 4222/E-23 (Test Stand "D" Workshop) is in place in right foreground with disturbed earth for western leg of tunnel system evident in background. Test Stand "C" is in center background, where first phase of tunnel construction ended. Test Stand "A" appears as tower in right background. (JPL negative no. 384-1838-C, 9 March 1959) - Jet Propulsion Laboratory Edwards Facility, Test Stand D, Edwards Air Force Base, Boron, Kern County, CA
Seasat: - JASIN workshop report. Volume 1: Findings and conclusions
NASA Technical Reports Server (NTRS)
1980-01-01
Data acquired from the Joint Air-Sea Interaction (JASIN) Experiment and Seasat data from overpasses that covered the JASIN area were compared and evaluated. The JASIN data were used as a high quality withheld data set. The Seasat data were prepared for each instrument: the Seasat-A Satellite Scatterometer (SASS), the Scanning Multichannel microwave radiometer (SMMR), and the synthetic aperture radar (SAR). The following results demonstrate the performance of Seasat: it was possible to identify mesoscale systems with the SASS as well as fronts; the SMMR provided accurate water vapor content of the atmosphere; the SAR showed evidence of helical rolls in the marine boundary layer; a SASS anomaly could be traced back to thunderstorm activity.
Proceedings of the 2004 NASA/ONR Circulation Control Workshop, Part 2
NASA Technical Reports Server (NTRS)
Jones, Gregory S. (Editor); Joslin, Ronald D. (Editor)
2005-01-01
This conference proceeding is comprised of papers that were presented at the NASA/ONR Circulation Control Workshop held 16-17 March 2004 at the Radisson-Hampton in Hampton, VA. Over two full days, 30 papers and 4 posters were presented with 110 scientists and engineers in attendance, representing 3 countries. As technological advances influence the efficiency and effectiveness of aerodynamic and hydrodynamic applications, designs, and operations, this workshop was intended to address the technologies, systems, challenges and successes specific to Coanda driven circulation control in aerodynamics and hydrodynamics. A major goal of this workshop was to determine the state-of-the-art in circulation control and to assess the future directions and applications for circulation control. The 2004 workshop addressed applications, experiments, computations, and theories related to circulation control, emphasizing fundamental physics, systems analysis, and applied research. The workshop consisted of single session oral presentations, posters, and written papers that are documented in this unclassified conference proceeding. The format of this written proceeding follows the agenda of the workshop. Each paper is followed with the presentation given at the workshop. the editors compiled brief summaries for each effort that is at the end of this proceeding. These summaries include the paper, oral presentation, and questions or comments that occurred during the workshop. The 2004 Circulation Control Workshop focused on applications including Naval vehicles (Surface and Underwater vehicles), Fixed Wing Aviation (general aviation, commercial, cargo, and business aircraft); V/STOL platforms (helicopters, military aircraft, tilt rotors); propulsion systems (propellers, jet engines, gas turbines), and ground vehicles (automotive, trucks, and other); wind turbines, and other nontraditional applications (e.g., vacuum cleaner, ceiling fan). As part of the CFD focus area of the 2004 CC Workshop, CFD practitioners were invited to compute a two-dimensional benchmark problem for which geometry, flow conditions, grids, and experimental data were available before the workshop. The purpose was to accumulate a database of simulations for a single problem using a range of CFD codes, turbulence models, and grid strategies so as to expand knowledge of model performance/requirements and guide simulation of practical CC configurations.
DOT National Transportation Integrated Search
2000-01-01
This document contains information about a Public Sector Workshop held in Minnesota that focused on increasing the awareness of Intelligent Transportation Systems (ITS) standards. It gives an overview of how the workshop proceeded, which topics were ...
The First NASA Aerospace Pyrotechnic Systems Workshop
NASA Technical Reports Server (NTRS)
St.cyr, William W. (Compiler)
1993-01-01
Papers from the conference proceedings are presented, and they are grouped by the following sessions: pyrotechnically actuated systems, laser initiation, and modeling and analysis. A fourth session, a panel discussion and open forum, concluded the workshop.
ORD/REGIONAL/OAR AIR TOXICS EXPOSURE ASSESSMENT WORKSHOP (SAN FRANCISCO,JUNE 25-27, 2002)
Approximately, one hundred scientists from ORD, OAR, Regional offices, and invited external presentors met for a three day conference in Region 9 offices in San Francisco, CA. Dr. Winona Victery, Science Advisor in Region 9 and Dr. David Klauder, ORD/OSP program manager worked ...
U.S. - India Collaboration on Air Quality and Climate Research and Education
With partial support from the U.s. National Science Foundation and U.S. Department of Energy, a workshop held March 14 - 24,2011, in India, brought together experts from the United States and India (among other countries) with a common vision for identifying priority areas of res...
A workshop was held in Research Triangle Park, NC on November 18-19, 2002 to discuss scientific issues associated with measuring, modeling, and assessing exposure and risk to air containing contaminants generated as a result of national emergencies and disasters. Participants wer...
Applying Sensor Networks to Evaluate Air Pollutant Emissions from Fugitive and Area Sources
This is a presentation to be given at Duke University's Wireless Intelligent Sensor Network workshop on June 5, 2013. The presentation discusses the evaluation of a low cost carbon monoxide sensor network applied at a recent forest fire study and also evaluated against a referen...
Second Greenhouse Gas Information System Workshop
NASA Astrophysics Data System (ADS)
Boland, S. W.; Duren, R. M.; Mitchiner, J.; Rotman, D.; Sheffner, E.; Ebinger, M. H.; Miller, C. E.; Butler, J. H.; Dimotakis, P.; Jonietz, K.
2009-12-01
The second Greenhouse Gas Information System (GHGIS) workshop was held May 20-22, 2009 at the Sandia National Laboratories in Albuquerque, New Mexico. The workshop brought together 74 representatives from 28 organizations including U.S. government agencies, national laboratories, and members of the academic community to address issues related to the understanding, operational monitoring, and tracking of greenhouse gas emissions and carbon offsets. The workshop was organized by an interagency collaboration between NASA centers, DOE laboratories, and NOAA. It was motivated by the perceived need for an integrated interagency, community-wide initiative to provide information about greenhouse gas sources and sinks at policy-relevant temporal and spatial scales in order to significantly enhance the ability of national and regional governments, industry, and private citizens to implement and evaluate effective climate change mitigation policies. This talk provides an overview of the second Greenhouse Gas Information System workshop, presents its key findings, and discusses current status and next steps in this interagency collaborative effort.
Coastal Inlets Research Program
2013-03-01
structures, adjacent beaches dredging and placement within, regional systems . Transfer technology and products Guidance documents, Workshops...Mitch Brown Coastal Modeling Waves at Navigation System (CMS) Alex Sanchez Structures Lihwa Lin Z ki D i bil kCIRPHonghai Li e em r e C l...MD Inlet Modeling System technology transfer workshop 13 Years of Annu l Wo kshops 40 Cumulativ Workshops , #7 – FSBPA, Jan/Feb 2006
NASA Technical Reports Server (NTRS)
Maryniak, Gregg E.
1992-01-01
Prior studies by NASA and the Space Studies Institute have looked at the infrastructure required for the construction of solar power satellites (SPS) and other valuable large space systems from lunar materials. This paper discusses the results of a Lunar Systems Workshop conducted in January 1988. The workshop identified components of the infrastructure that could be implemented in the near future to create a revenue stream. These revenues could then be used to 'bootstrap' the additional elements required to begin the commercial use of nonterrestrial materials.
Proceedings of the Toronto TEAM/ACES workshop
DOE Office of Scientific and Technical Information (OSTI.GOV)
Turner, L.R.
The third TEAM Workshop of the third round was held at Ontario Hydro in Toronto 25--26 October 1990, immediately following the Conference on Electromagnetic Field Computation. This was the first Joint Workshop with ACES (Applied Computational Electromagnetics Society), whose goals are similar to TEAM, but who tend to work at higher frequencies (Antennas, Propagation, and Scattering). A fusion problem, the eddy current heating of the case of the Euratom Large Coil Project Coil, was adapted as Problem 14 at the Oxford Workshop, and a solution to that problem was presented at Toronto by Oskar Biro of the Graz (Austria) Universitymore » of Technology. Individual solutions were also presented for Problems 8 (Flaw in a Plate) and 9 (Moving Coil inside a Pipe). Five new solutions were presented to Problem 13 (DC Coil in a Ferromagnetic Yoke), and Koji Fujiwara of Okayama University summarized these solutions along with the similar number presented at Oxford. The solutions agreed well in the air but disagreed in the steel. Codes with a formulation in magnetic field strength or scalar potential underestimated the flux density in the steel, and codes based on flux density or vector potential overestimated it. Codes with edge elements appeared to do better than codes with nodal elements. These results stimulated considerable discussions; in my view that was the most valuable result of the workshop.« less
Transport growth in Bangkok: Energy, environment, and traffic congestion. Workshop proceedings
DOE Office of Scientific and Technical Information (OSTI.GOV)
Philpott, J.
1995-07-01
Bangkok, the capital of Thailand, is a physically and economically complexcity with a complicated transport system. With daily traffic congestion averaging 16 hours, the air quality is such that to breathe street level pollution for 8 eight hours is roughly equivalent to smoking nine cigarettes per day. Estimates suggest idling traffic costs up to $1.6 billion annually. Energy use within the transport sector is on a steady rise with an estimated increase in 11 years of two and one half times. Severe health impacts have begun to effect many residents - young children and the elderly being particularly vulnerable. Bangkok`smore » air quality and congestion problems are far from hopeless. Great potential exists for Bangkok to remedy its transport-related problems. The city has many necessary characteristics that allow an efficient, economical system of transport. For example, its high density level makes the city a prime candidate for an efficient system of mass transit and the multitude and close proximity of shops, street vendors, restaurants, and residential areas is highly conducive to walking and cycling. Technical knowledge and capacity to devise and implement innovative policies and projects to address air quality and congestion problems is plentiful. There is also consensus among Bangkokians that something needs to be done immediately to clear the air and the roads. However, little has been done. This report proposes a new approach to transport planning for Bangkok that integrates consideration of ecological, social, and financial viability in the process of making decisions regarding managing existing infrastructure and investments in new infrastructure. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.« less
NASA Technical Reports Server (NTRS)
Hakimdavar, Raha; Wood, Danielle; Eylander, John; Peters-Lidard, Christa; Smith, Jane; Doorn, Brad; Green, David; Hummel, Corey; Moore, Thomas C.
2018-01-01
River basins for which transboundary coordination and governance is a factor are of concern to US national security, yet there is often a lack of sufficient data-driven information available at the needed time horizons to inform transboundary water decision-making for the intelligence, defense, and foreign policy communities. To address this need, a two-day workshop entitled Transboundary Water: Improving Methodologies and Developing Integrated Tools to Support Global Water Security was held in August 2017 in Maryland. The committee that organized and convened the workshop (the Organizing Committee) included representatives from the National Aeronautics and Space Administration (NASA), the US Army Corps of Engineers Engineer Research and Development Center (ERDC), and the US Air Force. The primary goal of the workshop was to advance knowledge on the current US Government and partners' technical information needs and gaps to support national security interests in relation to transboundary water. The workshop also aimed to identify avenues for greater communication and collaboration among the scientific, intelligence, defense, and foreign policy communities. The discussion around transboundary water was considered in the context of the greater global water challenges facing US national security.
SEARCH Workshop on Large-Scale Atmosphere/Cryosphere Observations
NASA Technical Reports Server (NTRS)
2002-01-01
The purpose of the workshop held in Seattle during 27-29 November 2001 was to review existing land, sea ice, and atmospheric observations and the prospect for an Arctic System Reanalysis, through white papers, invited speakers, and panels. A major task for SEARCH was to determine how existing observation systems can be best used and enhanced to understand and anticipate the course of the ongoing changes in the Arctic. The primary workshop conclusion is that there is no cohesion among various Arctic disciplines and data types to form a complete observation set of Arctic change; a second workshop conclusion is that present data sets are vastly underutilized in understanding Arctic change; a third conclusion is that a distributed observing system must accommodate a wide range of spatial patterns of variability.
Multiscale Modeling, Simulation and Visualization and Their Potential for Future Aerospace Systems
NASA Technical Reports Server (NTRS)
Noor, Ahmed K. (Compiler)
2002-01-01
This document contains the proceedings of the Training Workshop on Multiscale Modeling, Simulation and Visualization and Their Potential for Future Aerospace Systems held at NASA Langley Research Center, Hampton, Virginia, March 5 - 6, 2002. The workshop was jointly sponsored by Old Dominion University's Center for Advanced Engineering Environments and NASA. Workshop attendees were from NASA, other government agencies, industry, and universities. The objectives of the workshop were to give overviews of the diverse activities in hierarchical approach to material modeling from continuum to atomistics; applications of multiscale modeling to advanced and improved material synthesis; defects, dislocations, and material deformation; fracture and friction; thin-film growth; characterization at nano and micro scales; and, verification and validation of numerical simulations, and to identify their potential for future aerospace systems.
DOT National Transportation Integrated Search
2008-06-23
This document presents the notes taken at the USDOT Integrated Corridor Management (ICM) Transit Data Gaps for Rail Transit Systems Initial Planning Workshop. Different scenarios for handling increased demand on rail and bus transit systems are discu...
77 FR 58580 - Interview Room Recording System Standard and License Plate Reader Standard Workshops
Federal Register 2010, 2011, 2012, 2013, 2014
2012-09-21
... DEPARTMENT OF JUSTICE Office of Justice Programs [OJP (NIJ) Docket No. 1603] Interview Room Recording System Standard and License Plate Reader Standard Workshops AGENCY: National Institute of Justice, DOJ. [[Page 58581
Industry/University Consortium for ATS research
DOE Office of Scientific and Technical Information (OSTI.GOV)
Allen, R.P.; Golan, L.P.
1993-11-01
The Industry/University ATS research program is the result of two planning workshops. Workshop I was held April 8--10, 1991 and had the goal of identifying research needs for advanced gas turbine cycles that would permit rapid commercialization of cycles with significant improvements over the machines currently under development, in terms of the cost of electricity produced and the environmental burdens resulting from their use in power producing. Workshop II was held in January 1992 and continued the identification of the research needs to develop advanced gas turbine systems. The goals established for the ATS systems were: (1) efficiency exceeding 60%more » for large utility turbine system and 15% improvement in heat rate for industrial systems; (2) busbar energy costs 10% less than current state of the art and (3) fuel flexible designs. In addition Workshop II participants agreed that an industry driven research consortium was an acceptable mechanism to achieve base technology development needs.« less
Yeates, D B; Mauderly, J L
2001-08-01
The articles in this monograph focus on the mechanisms whereby ambient particulate matter (PM) and co-pollutants deposited in the respiratory tract cause cardiovascular and systemic effects, especially in persons with preexisting conditions such as allergic hyperresponsiveness and pulmonary, cardiac, and vascular diseases. During the past few years, it has become clear that inhaled pollutants cause adverse effects outside the respiratory tract and that these effects may in some cases be more important than respiratory effects. Investigators pursuing traditional approaches to understanding mechanisms of air pollution effects need to be brought together with those outside that community who have expertise in pathogenetic mechanisms by which deposited air pollutants might affect nonrespiratory organs. To this end, a workshop was held and papers were developed from a broad range of scientists having specialized expertise in allergic and cardiovascular physiology. The overall goal of this monograph is to benchmark current thinking and enhance progress toward identifying and understanding the mechanisms by which nonrespiratory health effects occur and, by extension, to facilitate the appropriate management of relationships between air quality and health. This monograph contains a compilation of multidisciplinary research that forms a framework for generating and testing plausible new research hypotheses. Not only will this information stimulate the thinking of researchers, but it will also provide an improved foundation for funding agencies and advisory groups to frame research strategies, programs, and priorities.
NASA Technical Reports Server (NTRS)
1988-01-01
A user's workshop for CARE 3, a reliability assessment tool designed and developed especially for the evaluation of high reliability fault tolerant digital systems, was held at NASA Langley Research Center on October 6 to 7, 1987. The main purpose of the workshop was to assess the evolutionary status of CARE 3. The activities of the workshop are documented and papers are included by user's of CARE 3 and NASA. Features and limitations of CARE 3 and comparisons to other tools are presented. The conclusions to a workshop questionaire are also discussed.
NASA Technical Reports Server (NTRS)
Noor, Ahmed K. (Compiler)
2000-01-01
This document contains the proceedings of the Training Workshop on Nanobiotechnology held at NASA Langley Research Center, Hampton, Virginia, June 14-15, 2000. The workshop was jointly sponsored by the University of Virginia's Center for Advanced Computational Technolog and NASA. Workshop attendees were from NASA, other government agencies, industry and universities. The objectives of the workshop were to give overviews of the diverse activities in nanobiotechnology and to identify their potential for future aerospace systems.
An evolutionary outlook of air traffic flow management techniques
NASA Astrophysics Data System (ADS)
Kistan, Trevor; Gardi, Alessandro; Sabatini, Roberto; Ramasamy, Subramanian; Batuwangala, Eranga
2017-01-01
In recent years Air Traffic Flow Management (ATFM) has become pertinent even in regions without sustained overload conditions caused by dense traffic operations. Increasing traffic volumes in the face of constrained resources has created peak congestion at specific locations and times in many areas of the world. Increased environmental awareness and economic drivers have combined to create a resurgent interest in ATFM as evidenced by a spate of recent ATFM conferences and workshops mediated by official bodies such as ICAO, IATA, CANSO the FAA and Eurocontrol. Significant ATFM acquisitions in the last 5 years include South Africa, Australia and India. Singapore, Thailand and Korea are all expected to procure ATFM systems within a year while China is expected to develop a bespoke system. Asia-Pacific nations are particularly pro-active given the traffic growth projections for the region (by 2050 half of all air traffic will be to, from or within the Asia-Pacific region). National authorities now have access to recently published international standards to guide the development of national and regional operational concepts for ATFM, geared to Communications, Navigation, Surveillance/Air Traffic Management and Avionics (CNS+A) evolutions. This paper critically reviews the field to determine which ATFM research and development efforts hold the best promise for practical technological implementations, offering clear benefits both in terms of enhanced safety and efficiency in times of growing air traffic. An evolutionary approach is adopted starting from an ontology of current ATFM techniques and proceeding to identify the technological and regulatory evolutions required in the future CNS+A context, as the aviation industry moves forward with a clearer understanding of emerging operational needs, the geo-political realities of regional collaboration and the impending needs of global harmonisation.
Combined Industry, Space and Earth Science Data Compression Workshop
NASA Technical Reports Server (NTRS)
Kiely, Aaron B. (Editor); Renner, Robert L. (Editor)
1996-01-01
The sixth annual Space and Earth Science Data Compression Workshop and the third annual Data Compression Industry Workshop were held as a single combined workshop. The workshop was held April 4, 1996 in Snowbird, Utah in conjunction with the 1996 IEEE Data Compression Conference, which was held at the same location March 31 - April 3, 1996. The Space and Earth Science Data Compression sessions seek to explore opportunities for data compression to enhance the collection, analysis, and retrieval of space and earth science data. Of particular interest is data compression research that is integrated into, or has the potential to be integrated into, a particular space or earth science data information system. Preference is given to data compression research that takes into account the scien- tist's data requirements, and the constraints imposed by the data collection, transmission, distribution and archival systems.
77 FR 60108 - Atlantic Highly Migratory Species; Electronic Dealer Reporting System Workshop
Federal Register 2010, 2011, 2012, 2013, 2014
2012-10-02
... reporting system will allow dealers to submit Atlantic sharks, swordfish, and BAYS tuna data on a more real-time basis and more efficiently, and will reduce duplicative data submissions from different regions... are open to any interested parties. DATES: Training workshops for the new electronic dealer system...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-01-05
...] Medical Device Quality System Regulation Educational Forum on Risk Management Through the Product Life...), is announcing a public workshop entitled ``Medical Device Quality System Regulation Educational Forum on Risk Management through the Product Life Cycle.'' This public workshop is intended to provide...
Next Generation CAD/CAM/CAE Systems
NASA Technical Reports Server (NTRS)
Noor, Ahmed K. (Compiler); Malone, John B. (Compiler)
1997-01-01
This document contains presentations from the joint UVA/NASA Workshop on Next Generation CAD/CAM/CAE Systems held at NASA Langley Research Center in Hampton, Virginia on March 18-19, 1997. The presentations focused on current capabilities and future directions of CAD/CAM/CAE systems, aerospace industry projects, and university activities related to simulation-based design. Workshop attendees represented NASA, commercial software developers, the aerospace industry, government labs, and academia. The workshop objectives were to assess the potential of emerging CAD/CAM/CAE technology for use in intelligent simulation-based design and to provide guidelines for focused future research leading to effective use of CAE systems for simulating the entire life cycle of aerospace systems.
Stakeholder Workshop on EPA GHG Data on Petroleum and Natural Gas Systems
This page describes EPA's November 2015 stakeholder workshop on greenhouse gas data on petroleum and natural gas systems from the Greenhouse Gas Reporting Program and U.S. Greenhouse Gas Inventory of Emissions and Sinks.
Workshop on Microwave Power Transmission and Reception. Workshop Paper Summaries
NASA Technical Reports Server (NTRS)
1980-01-01
Microwave systems performance and phase control are discussed. Component design and reliability are highlighted. The power amplifiers, radiating elements, rectennas, and solid state configurations are described. The proper sizing of microwave transmission systems is also discussed.
NASA Technical Reports Server (NTRS)
Eklund, Dean R.; Northam, G. B.; Mcdaniel, J. C.; Smith, Cliff
1992-01-01
A CFD (Computational Fluid Dynamics) competition was held at the Third Scramjet Combustor Modeling Workshop to assess the current state-of-the-art in CFD codes for the analysis of scramjet combustors. Solutions from six three-dimensional Navier-Stokes codes were compared for the case of staged injection of air behind a step into a Mach 2 flow. This case was investigated experimentally at the University of Virginia and extensive in-stream data was obtained. Code-to-code comparisons have been made with regard to both accuracy and efficiency. The turbulence models employed in the solutions are believed to be a major source of discrepancy between the six solutions.
Lau, Winifred Ka Yan; Liang, Peng; Man, Yu Bon; Chung, Shan Shan; Wong, Ming Hung
2014-03-01
This study investigated health risks exerted on electronic waste (e-waste) recycling workers exposed to cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), mercury (Hg), and zinc (Zn) in Hong Kong. E-waste recycling workshops were classified into eight working areas: 1 = office, 2 = repair, 3 = dismantling, 4 = storage, 5 = desoldering, 6 = loading, 7 = cable shredding, and 8 = chemical waste. The aforementioned metal concentrations were analyzed in suspended air particulates, surface dust and floor dust collected from the above study areas in five workshops. Elevated Pb levels were measured in dismantling and desoldering areas (582 and 486 μg/100 cm(2) in surface and 3,610 and 19,172 mg/kg in floor dust, respectively). Blood lead levels of 10 and 39.5 μg/dl were estimated using United States Environmental Protection Agency's Adult Lead Model as a result of exposure to the floor dust from these two areas. Human health risk assessments were conducted to evaluate cancer and noncancer risks resulting from exposure to floor dust through the combined pathways of ingestion, dermal contact, and inhalation. Findings indicated that workers may be exposed to cancer risks above the acceptable range at 147 in a million at the 95th percentile in the dismantling area. Workers should be informed of associated risks to safeguard their health.
MSFC Skylab Orbital Workshop, volume 3. [design and development of waste disposal system
NASA Technical Reports Server (NTRS)
1974-01-01
The waste management system for the Skylab Orbital Workshop is discussed. The general requirements of the system are presented. Illustrations of the components of the system are provided. Data concerning maximum expected performance capabilities are developed. The results of performance tests on the system components are reported. Emphasis is placed on the human factors engineering aspects of the system.
Transferring Learning from the Workshop to the Classroom
ERIC Educational Resources Information Center
Johnson, Kimberly A.
2009-01-01
As coordinator of the ABE Teaching and Learning Advancement System (ATLAS) based in the Hamline University School of Education in St. Paul, the author does many workshops or conference sessions in Minnesota's nine professional development regions each year. Typical single-day events offer multiple 90-minute workshops. She often questions the…
Environmental Scanning Workshop (Lansing, Michigan, June 10-11, 1992).
ERIC Educational Resources Information Center
Morrison, James L.
This publication presents an environmental scanning workshop for administrators in higher education institutions to help them incorporate environmental scanning into their planning and anticipation of future events. In particular, the workshop shows how to establish and sustain a comprehensive environmental scanning system and how to use the…
Career Information Workshops, 1978-79.
ERIC Educational Resources Information Center
McKinlay, Bruce
This publication reports an Oregon project to organize workshops to enable interested people to learn about the full range of benefits and requirements of a state career information system and to initiate the local developmental process if they decide to proceed. Chapter 1 addresses the need for Career Information Workshops and workshop…
ERIC Educational Resources Information Center
Fish, Cynthia, Ed.
This workshop report examines the admission and academic placement of students from the Caribbean. Workshop materials concerning the educational systems of the British patterned Caribbean, Cuba, Dominican Republic; Dutch patterned Caribbean, French West Indies, Haiti, Puerto Rico; and the U.S. Virgin Islands are presented. Workshop recommendations…
The USRA workshop report: Electrostatic fog dispersal
NASA Technical Reports Server (NTRS)
Davis, M. H. (Editor)
1983-01-01
The Workshop was held at the National Center for Atmospheric Research (NCAR) in Boulder, Colorado, on February 1-2, 1983. The Workshop was attended by seventeen experts in the scientific fields of fog and cloud physics, charged-particle electrodynamics, atmospheric turbulence, atmospheric electricity, and electro-gasdynamics. The major objective of the Workshop was to assess the scientific merits and scientific basis of the proposed system and to assess its potential for operational application.
Fenton, L.K.; Bishop, M.A.; Bourke, M.C.; Bristow, C.S.; Hayward, R.K.; Horgan, B.H.; Lancaster, N.; Michaels, T.I.; Tirsch, D.; Titus, T.N.; Valdez, A.
2010-01-01
The Second International Planetary Dunes Workshop took place in Alamosa, Colorado, USA from May 18-21, 2010. The workshop brought together researchers from diverse backgrounds to foster discussion and collaboration regarding terrestrial and extra-terrestrial dunes and dune systems. Two and a half days were spent on five oral sessions and one poster session, a full-day field trip to Great Sand Dunes National Park, with a great deal of time purposefully left open for discussion. On the last day of the workshop, participants assembled a list of thirteen priorities for future research on planetary dune systems. ?? 2010.
NASA Technical Reports Server (NTRS)
Frost, W. (Editor); Camp, D. W. (Editor); Durham, D. E. (Editor)
1978-01-01
The proceedings of a workshop held at the University of Tennessee Space Institute, Tullahoma, Tennessee, March 28-30, 1978, are reported. The workshop was jointly sponsored by NASA, NOAA, FAA, and brought together many disciplines of the aviation communities in round table discussions. The major objectives of the workshop are to satisfy such needs of the sponsoring agencies as the expansion of our understanding and knowledge of the interactions of the atmosphere with aviation systems, as the better definition and implementation of services to operators, and as the collection and interpretation of data for establishing operational criteria, relating the total meteorological inputs from the atmospheric sciences to the needs of aviation communities.
NASA LaRC Workshop on Guidance, Navigation, Controls, and Dynamics for Atmospheric Flight, 1993
NASA Technical Reports Server (NTRS)
Buttrill, Carey S. (Editor)
1993-01-01
This publication is a collection of materials presented at a NASA workshop on guidance, navigation, controls, and dynamics (GNC&D) for atmospheric flight. The workshop was held at the NASA Langley Research Center on March 18-19, 1993. The workshop presentations describe the status of current research in the GNC&D area at Langley over a broad spectrum of research branches. The workshop was organized in eight sessions: overviews, general, controls, military aircraft, dynamics, guidance, systems, and a panel discussion. A highlight of the workshop was the panel discussion which addressed the following issue: 'Direction of guidance, navigation, and controls research to ensure U.S. competitiveness and leadership in aerospace technologies.'
NASA Technical Reports Server (NTRS)
Kramer, Lynda J. (Compiler)
1999-01-01
The second NASA sponsored Workshop on Synthetic/Enhanced Vision (S/EV) Display Systems was conducted January 27-29, 1998 at the NASA Langley Research Center. The purpose of this workshop was to provide a forum for interested parties to discuss topics in the Synthetic Vision (SV) element of the NASA Aviation Safety Program and to encourage those interested parties to participate in the development, prototyping, and implementation of S/EV systems that enhance aviation safety. The SV element addresses the potential safety benefits of synthetic/enhanced vision display systems for low-end general aviation aircraft, high-end general aviation aircraft (business jets), and commercial transports. Attendance at this workshop consisted of about 112 persons including representatives from industry, the FAA, and other government organizations (NOAA, NIMA, etc.). The workshop provided opportunities for interested individuals to give presentations on the state of the art in potentially applicable systems, as well as to discuss areas of research that might be considered for inclusion within the Synthetic Vision Element program to contribute to the reduction of the fatal aircraft accident rate. Panel discussions on topical areas such as databases, displays, certification issues, and sensors were conducted, with time allowed for audience participation.
Space power technology 21: Photovoltaics
NASA Astrophysics Data System (ADS)
Wise, Joseph
1989-04-01
The Space Power needs for the 21st Century and the program in photovoltaics needed to achieve it are discussed. Workshops were conducted in eight different power disciplines involving industry and other government agencies. The Photovoltaics Workshop was conducted at Aerospace Corporation in June 1987. The major findings and recommended program from this workshop are discussed. The major finding is that a survivable solar power capability is needed in photovoltaics for critical Department of Defense missions including Air Force and Strategic Defense Initiative. The tasks needed to realize this capability are described in technical, not financial, terms. The second finding is the need for lightweight, moderately survivable planar solar arrays. High efficiency thin III-V solar cells can meet some of these requirements. Higher efficiency, longer life solar cells are needed for application to both future planar and concentrator arrays with usable life up to 10 years. Increasing threats are also anticipated and means for avoiding prolonged exposure, retraction, maneuvering and autonomous operation are discussed.
UAH/NASA Workshop on Fluids Experiment System
NASA Technical Reports Server (NTRS)
Hendricks, J. (Editor); Askins, B. (Editor)
1979-01-01
The Fluids Experiment System is being developed to fit into a Spacelab rack. Papers presented at this workshop describe a variety of fluid and chemical experiments that would be of great benefit to researchers of processes in a low gravity environment.
1990-02-13
spacecraft had near-polar orbits except for AE-C (680) and AE-E (190). This exten- sive lower thermosphere data set has been obtained over a wide...two satellite data sets is believed due mainly to uncertainties in the ballistic coefficients used to convert orbital drag measurements to atmospheric...eccentricity sun-synchronous orbit (1400/0200 LT) would provide data in local time-latitude regions not covered by the present data set . Coordination with
1988-08-01
the crash of Delta Flight 191 in the summer of 1985, the Dallas community was faced with the awful reality of a mass casualty disaster. At that time...accident free aviation; air crashes appear to be an evil and seemingly inevitable reality . Airports involved in air carrier operations are required to...hours. (3) Retrieval Phase. At this point, the victim becomes aware that the end of his ordeal is in fact a reality and perhaps here is when the guard
2008-10-01
Chow, J.C. (2006). Feasibility of soil dust source apportionment by the pyrolysis-gas chromatography/mass spectrometry method. J. Air Waste Manage...receptor-oriented source apportionment models. • Develop monitoring methods to determine source and fence line amounts of fugitive dust emissions for...offsite impact, including evaluation with receptor- oriented source apportionment models 76 8.8.1 Background 76 8.8.2 Significance 77 8.8.3
A Curriculum Activities Guide to Electric Power Generation and the Environment.
ERIC Educational Resources Information Center
Tully, Randolph R., Jr., Ed.
This guide was developed by teachers involved in a workshop on "Electric Power Generation and the Environment." Activity topics are: (1) Energy and the Consumer; (2) Energy and Water Pollution; and (3) Energy and Air Pollution. Within these topics, the activities are classified as awareness level, transitional level, or operational…
Photocopy of drawing (this photograph is an 8" x 10" ...
Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1987 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) HANDICAP RESTROOM, BUILDING NO. 1, SHEET 1 OF 2 - U.S. Naval Air Station, Ship Carpenter's Workshop, 368 South Avenue, Pensacola, Escambia County, FL
Magnetic Suspension Technology Workshop
NASA Technical Reports Server (NTRS)
Keckler, Claude R. (Editor); Groom, Nelson J. (Editor); Britcher, Colin P. (Editor)
1993-01-01
In order to identify the state of magnetic suspension technology in such areas as rotating systems, pointing of experiments or subsystems, payload isolation, and superconducting materials, a workshop on Magnetic Suspension Technology was held at the Langley Research Center in Hampton, Virginia, on 2-4 Feb. 1988. The workshop included five technical sessions in which a total of 24 papers were presented. The technical sessions covered the areas of pointing, isolation, and measurement, rotating systems, modeling and control, and superconductors. A list of attendees is provided.
VLBI Digital-Backend Intercomparison Test Report
NASA Technical Reports Server (NTRS)
Whitney, Alan; Beaudoin, Christopher; Cappallo, Roger; Niell, Arthur; Petrachenko, Bill; Ruszczyk, Chester A.; Titus, Mike
2013-01-01
Issues related to digital-backend (DBE) systems can be difficult to evaluate in either local tests or actual VLBI experiments. The 2nd DBE intercomparison workshop at Haystack Observatory on 25-26 October 2012 provided a forum to explicitly address validation and interoperability issues among independent global developers of DBE equipment. This special report discusses the workshop. It identifies DBE systems that were tested at the workshop, describes the test objectives and procedures, and reports and discusses the results of the testing.
NASA Technical Reports Server (NTRS)
Litt, Jonathan S. (Compiler)
2018-01-01
NASA Glenn Research Center hosted a Users' Workshop on the Toolbox for the Modeling and Analysis of Thermodynamic Systems (T-MATS) on August 21, 2017. The objective of this workshop was to update the user community on the latest features of T-MATS, and to provide a forum to present work performed using T-MATS. Presentations highlighted creative applications and the development of new features and libraries, and emphasized the flexibility and simulation power of T-MATS.
Advancing research and applications with lightning detection and mapping systems
NASA Astrophysics Data System (ADS)
MacGorman, Donald R.; Goodman, Steven J.
2011-11-01
Southern Thunder 2011 Workshop; Norman, Oklahoma, 11-14 July 2011 The Southern Thunder 2011 (ST11) Workshop was the fourth in a series intended to accelerate research and operational applications made possible by the expanding availability of ground-based and satellite systems that detect and map all types of lightning (in-cloud and cloud-to-ground). This community workshop, first held in 2004, brings together lightning data providers, algorithm developers, and operational users in government, academia, and industry.
Student involvement in the Geospace Environment Modeling (GEM) workshop
NASA Astrophysics Data System (ADS)
Allen, R. C.; Cohen, I. J.
2014-12-01
The Geospace Environment Modeling (GEM) workshop is a unique venue for students to begin to integrate into the magnetospheric community. GEM, an annual workshop funded by the NSF, allows students to present their research in a collaborative atmosphere and to engage with senior scientists as peers. This builds confidence in the students, while also allowing them to share ideas and strengthen their research. Each GEM workshop starts with a student-run and organized "student day", in which older students volunteer to present tutorials on different magnetospheric systems and processes. These tutorials strive to put the upcoming week of talks and posters in context while providing an overarching base understanding of the magnetospheric system. By starting the week with student taught tutorials, as well as icebreaker activities, the students become comfortable with asking questions and set the tone for the less formal student and discussion-oriented workshop.
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1996-05-01
The purpose of the workshop was to foster communication within the technical community on issues surrounding stabilization and immobilization of the Department`s surplus plutonium and plutonium- contaminated wastes. The workshop`s objectives were to: build a common understanding of the performance, economics and maturity of stabilization and immobilization technologies; provide a system perspective on stabilization and immobilization technology options; and address the technical issues associated with technologies for stabilization and immobilization of surplus plutonium and plutonium- contaminated waste. The papers presented during this workshop have been indexed separately.
DOT National Transportation Integrated Search
1977-07-01
The workshop focused on current methods of assessing the effectiveness of crime and vandalism reduction methods that are used in conventional urban mass transit systems, and on how they might be applied to new AGT systems. Conventional as well as nov...
POSTERS FOR WORKSHOP ON EPA’S ARSENIC REMOVAL DEMONSTRATION PROGRAM: RESULTS AND LESSONS LEARNED.
The Workshop included posters on 21 different arsenic demonstration projects. Each poster included information on raw water quality, cost of the system, a schematic of the layout of the system and several graphs and tables on the performance of the system for the removal of arsen...
Mobility 2000 presents intelligent vehicles and highway systems : 1990 summary
DOT National Transportation Integrated Search
1990-07-01
The national IVHS Workshop in Dallas March 19-21, 1990, was sponsored by government, university, and industry members involved in Mobility 2000, and hosted by the Texas Transportation Institute, The Texas A&M University System. The Workshop was a for...
76 FR 64330 - Advanced Scientific Computing Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2011-10-18
... talks on HPC Reliability, Diffusion on Complex Networks, and Reversible Software Execution Systems Report from Applied Math Workshop on Mathematics for the Analysis, Simulation, and Optimization of Complex Systems Report from ASCR-BES Workshop on Data Challenges from Next Generation Facilities Public...
Stakeholder Workshop Presentations: EPA Greenhouse Gas Data on Petroleum and Natural Gas Systems
View the summary and presentations from the November 2015 stakeholder workshop on greenhouse gas data on petroleum and natural gas systems from the Greenhouse Gas Reporting Program and U.S. Greenhouse Gas Inventory of Emissions and Sinks.
PREFACE: International Workshop on Dirac Electrons in Solids 2015
NASA Astrophysics Data System (ADS)
Ogata, M.; Suzumura, Y.; Fuseya, Y.; Matsuura, H.
2015-04-01
It is our pleasure to publish the Proceedings of the International Workshop on Dirac Electrons in Solids held in University of Tokyo, Japan, for January 14-15, 2015. The workshop was organized by the entitled project which lasted from April 2012 to March 2015 with 10 theorists. It has been supported by a Grand-in-Aid for Scientific Research (A) from the Ministry of Education, Culture, Sports, Science, and Technology, Japan. The subjects discussed in the workshop include bismuth, organic conductors, graphene, topological insulators, new materials including Ca3PbO, and new directions in theory (superconductivity, orbital susceptibility, etc). The number of participants was about 70 and the papers presented in the workshop include four invited talks, 16 oral presentations, and 23 poster presentations. Dirac electron systems appear in various systems, such as graphene, quasi-two-dimensional organic conductors, bismuth, surface states in topological insulators, new materials like Ca3PbO. In these systems, characteristic transport properties caused by the linear dispersion of Dirac electrons and topological properties, have been extensively discussed. In addition to these, there are many interesting research fields such as Spin-Hall effect, orbital diamagnetism due to interband effects, Landau levels characteristic to Dirac dispersion, anomalous interlayer transport phenomena and magnetoresistance, the effects of spin-orbit interaction, and electron correlation. The workshop focused on recent developments of theory and experiment of Dirac electron systems in the above materials. We note that all papers published in this volume of Journal of Physics: Conference Series were peer reviewed. Reviews were performed by expert referees with professional knowledge and high scientific standards in this field. Editors made efforts so that the papers may satisfy the criterion of a proceedings journal published by IOP Publishing. We hope that all the participants of the workshop enjoyed discussions and that these proceedings of the workshop help to extend the international research activities into Dirac Electrons in Solids in the future.
The 1977 Goddard Space Flight Center Battery Workshop
NASA Technical Reports Server (NTRS)
1977-01-01
The papers presented were derived from transcripts taken at the Tenth Annual Battery Workshop held at the Goddard Space Flight Center, November 15-17, 1977. The Workshop was attended by manufacturers, users, and government representatives interested in the latest results of testing, analysis, and development of the sealed nickel cadmium cell system. The purpose of the Workshop was to share flight and test experience, stimulate discussion on problem areas, and to review the latest technology improvements.
NASA Technical Reports Server (NTRS)
1974-01-01
The technical aspects of the Skylab-Orbital Workshop are discussed. Original concepts, goals, design philosophy, hardware, and testing are reported. The final flight configuration, overall test program, and mission performance are analyzed. The systems which are examined are: (1) the structural system, (2) the meteoroid shield systems, and (3) the environmental/thermal control subsystem.
2010-01-01
Introduction Atoifi Adventist Hospital is a 90 bed general hospital in East Kwaio, Malaita, Solomon Islands providing services to the population of subsistence villagers of the region. Health professionals at the hospital and attached College of Nursing have considerable human capacity and willingness to undertake health research. However they are constrained by limited research experience, training opportunities, research systems, physical infrastructure and access to resources. This brief commentary describes an 'Introduction to Health Research' workshop delivered at Atoifi Adventist Hospital in September 2009 and efforts to move from 'research workshop' to 'research work'. The Approach Using a participatory-action research approach underpinned by decolonising methodologies, staff from Atoifi Adventist Hospital and James Cook University (Queensland, Australia) collaboratively designed, implemented and evaluated a health research workshop. Basic health research principles and methods were presented using active learning methodologies. Following the workshop, Atoifi Adventist Hospital and Atoifi College of Nursing staff, other professionals and community members reported an increased awareness and understanding of health research. The formation of a local Research Committee, improved ethics review procedures and the identification of local research mentors followed the week long workshop. The workshop has acted as a catalyst for research activity, increasing structural and human resource capacity for local health professionals and community leaders to engage in research. Discussion and Conclusions Participants from a variety of educational backgrounds participated in, and received benefit from, a responsive, culturally and linguistically accessible health research workshop. Improving health research systems at a remote hospital and aligning these with local and national research agendas is establishing a base to strengthen public health research and practice on Malaita, Solomon Islands. PMID:21034512
Redman-Maclaren, Michelle L; Maclaren, David J; Solomon, Janella; Muse, Alwin; Asugeni, Rowena; Harrington, Humpress; Kekuabata, Esau; Speare, Richard; Clough, Alan R
2010-10-31
Atoifi Adventist Hospital is a 90 bed general hospital in East Kwaio, Malaita, Solomon Islands providing services to the population of subsistence villagers of the region. Health professionals at the hospital and attached College of Nursing have considerable human capacity and willingness to undertake health research. However they are constrained by limited research experience, training opportunities, research systems, physical infrastructure and access to resources. This brief commentary describes an 'Introduction to Health Research' workshop delivered at Atoifi Adventist Hospital in September 2009 and efforts to move from 'research workshop' to 'research work'. Using a participatory-action research approach underpinned by decolonising methodologies, staff from Atoifi Adventist Hospital and James Cook University (Queensland, Australia) collaboratively designed, implemented and evaluated a health research workshop. Basic health research principles and methods were presented using active learning methodologies. Following the workshop, Atoifi Adventist Hospital and Atoifi College of Nursing staff, other professionals and community members reported an increased awareness and understanding of health research. The formation of a local Research Committee, improved ethics review procedures and the identification of local research mentors followed the week long workshop. The workshop has acted as a catalyst for research activity, increasing structural and human resource capacity for local health professionals and community leaders to engage in research. Participants from a variety of educational backgrounds participated in, and received benefit from, a responsive, culturally and linguistically accessible health research workshop. Improving health research systems at a remote hospital and aligning these with local and national research agendas is establishing a base to strengthen public health research and practice on Malaita, Solomon Islands.
Leader's Guide: Facilitating Inquiry in the Classroom.
ERIC Educational Resources Information Center
Newton, Fred E.
This is the leader's guide and training materials for conducting workshops on an instructional system which utilizes the process of inquiry. The guide is designed for leaders of these workshops and lists the leader's activities. It is organized according to the 18 major workshop experiences, referred to as subset. Each subset guide is organized…
Feminist Pedagogy Meets Male Sports: A Workshop on Gender Sensitivity for the Men's Rugby Club.
ERIC Educational Resources Information Center
Scanlon, Jennifer
1994-01-01
Discusses a workshop that used feminist pedagogy to challenge students' deeply ingrained sexism, promote their appreciation of differences, and encourage them to change their behavior voluntarily. Participants involved a group of male students undergoing punishment in the campus judicial system. Workshop results are discussed. (GR)
Forest health through silviculture: Proceedings of the 1995 National Silviculture Workshop
Lane G. Eskew
1995-01-01
Includes 32 papers documenting presentations at the 1995 Forest Service National Silviculture Workshop. The workshop's purpose was to review, discuss, and share silvicultural research information and management experience critical to forest health on National Forest System lands and other Federal and private forest lands. Papers focus on the role of natural...
Applied Information Systems Research Program Workshop
NASA Technical Reports Server (NTRS)
1991-01-01
The first Applied Information Systems Research Program (AISRP) Workshop provided the impetus for several groups involved in information systems to review current activities. The objectives of the workshop included: (1) to provide an open forum for interaction and discussion of information systems; (2) to promote understanding by initiating a dialogue with the intended benefactors of the program, the scientific user community, and discuss options for improving their support; (3) create an advocacy in having science users and investigators of the program meet together and establish the basis for direction and growth; and (4) support the future of the program by building collaborations and interaction to encourage an investigator working group approach for conducting the program.
Workshop on Assurance for Autonomous Systems for Aviation
NASA Technical Reports Server (NTRS)
Brat, Guillaume; Davies, Misty; Giannakopoulou, Dimitra; Neogi, Natasha
2016-01-01
This report describes the workshop on Assurance for Autonomous Systems for Aviation that was held in January 2016 in conjunction with the SciTech 2016 conference held in San Diego, CA. The workshop explored issues related to assurance for autonomous systems and also the idea of trust in these systems. Specifically, we focused on discussing current practices for assurance of autonomy, identifying barriers specific to autonomy as related to assurance as well as operational scenarios demonstrating the need to address the barriers. Furthermore, attention was given to identifying verification techniques that may be applicable to autonomy, as well as discussing new research directions needed to address barriers, thereby involving potential shifts in current practices.
A new technology for harnessing the dye polluted water and dye collection in a chemical factory.
Pu, J P; Pu, P M; Hu, C H; Qian, J L; Pu, J X; Hua, J K
2001-04-01
A new technology for harnessing the dye polluted water and dye collection was developed. It is based on the enhanced evaporation by using solar, wind and air temperature energy and additional heat-electric energy. It consists of four parts: (1) evaporation carrier system (evaporation carrier and frame for evaporation carrier) for polluted water; (2) polluted water circulating system (pumping-spraying-collecting); (3) heating system; (4) workshop with polluted water reservoir-tanks and rainfall prevention roof. The polluted water was (heated in case necessary) sprayed to the evaporation carrier system and the water was evaporated when it moved in the space and downward along the carrier mainly by using natural (solar, wind and air temperature energy). In case, when there is no roof for the carrier system, the polluted water can be stored in the reservoirs (storage volume for about 20 days). The first 10-25 mm rainfall also need to be stored in the reservoirs to meet the state standard for discharging wastewater. The dye may be collected at the surface in the reservoir-tanks and the crystallized salt may be collected at the bottom plate. The black-color wastewater released by the factory is no more discharged to the surface water system of Taihu Lake Basin. About 2 kg dye and 200 kg industrial salt may be collected from each tone of the polluted water. The non-pollution production of dye may be realized by using this technology with environmental, economical and social benefits.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Pickett, Chris A; Tolk, Keith M; Keel, Frances M
2010-01-01
The Institute of Nuclear Materials Management (INMM) held an International Workshop, 'Containment & Surveillance (C/S): Concepts for the 21st Century,' June 6-11, 2010, at the Oak National Laboratory, in Oak Ridge, Tennessee. The National Nuclear Security Administration (NNSA) Office of Nonproliferation Research and Development and Office of Nonproliferation and International Security sponsored the event. The workshop focused on determining concepts and needs for 21st century containment and surveillance (C/S) systems that support International Atomic Energy Agency (IAEA) safeguards and future arms control agreements. Panel discussions by subject matter experts and international practitioners addressed daily topical themes encompassing the following areasmore » of C/S: authentication; tagging, sealing, and containment verification; and surveillance systems. Each panel discussion was followed by a question-and-answer session with the audience and an afternoon breakout session. The facilitated breakout sessions were used to compile information and determine future needs. Individuals attending the workshop included C/S experts and practitioners; IAEA and arms control inspectors; technology providers; vendors; students; and individuals with an interest in, or desire to learn about, future C/S system needs. The primary goal of the workshop was to produce a document that details the future research and development needs for C/S systems that support nuclear safeguards and arms control missions. This talk will present a compilation of the information obtained from breakout sessions at the workshop.« less
Nazari, Jalil; Mahmoudi, Nader; Dianat, Iman; Graveling, Richard
2012-01-01
Background: Carpet weaving operations usualy involve poor working conditions that can lead to the development of musculoskeletal disorders (MSDs). This study investigated MSDs among car¬pet weavers in relation to working conditions from workers' view in Tabriz City, Northwest Iran. Methods: This cross-sectional and descriptive study was conducted in city of Tabriz, Iran. Data were col¬lected using interviews and questionnaires. The study population consisted of 200 randomly selected healthy weavers from twenty five active carpet weaving workshops. Results: The results showed a high prevalence of musculoskeletal problems among the study population. The most commonly affected body areas were neck, lower back, ankles/feet, hands/wrists, upper back, shoulders and knees, respectively. More than half of the weavers were not satisfied with the thermal con¬dition, noise level and cleanliness of the air in the workshops. The result indicated a significant relation¬ship between upper back symptoms and daily working time and between lower back symptoms and the numbers of rows of knots woven in a day. Weavers' satisfaction with hand tools shape and thermal condi¬tion of the workshops were associated with lower back symptoms, whereas satisfaction with weaving looms were associated with upper back complaints. Conclusion: The poor working condition of hand-woven carpet workshops such as environmental con¬ditions and work station design and tools should be the subject of ergonomics interventions. PMID:24688943
NASA Technical Reports Server (NTRS)
Carsey, Frank; Behar, Alberto
2004-01-01
We have continued to develop a concept for use of autonomous rovers, originally developed for use in planetary exploration, in polar science on Earth; the concept was the subject of a workshop, and this report summarizes and extends that workshop. The workshop on Antarctic Autonomous Scientific Vehicles and Traverses met at the National Geographic Society on February 14 and 15, 2001 to discuss scientific objectives and benefits of the use of autonomous rovers. The participants enthusiastically viewed rovers as being uniquely valuable for such tasks as data taking on tedious or repetitive routes, traverses in polar night, difficult or hazardous routes, extremely remote regions, routes requiring only simple instrumentation, traverses that must be conducted at low speed, augments of manned traverses, and scientific procedures not compatible with human presence or combustion engines. The workshop has concluded that instrumented autonomous vehicles, of the type being developed for planetary exploration, have the potential to contribute significantly to the way science in conducted in Antarctica while also aiding planetary technology development, and engaging the public's interest. Specific objectives can be supported in understanding ice sheet mass balance, sea ice heat and momentum exchange, and surface air chemistry processes. In the interval since the workshop, we have concluded that organized program to employ such rovers to perform scientific tasks in the Fourth International Polar Year would serve the objectives of that program well.
NASA Astrophysics Data System (ADS)
Dahiya, R. P.
1987-06-01
The present conference on the development status of hydrogen energy technologies considers electrolytic hydrogen production, photoelectrolytic hydrogen production, microorganic hydrogen production, OTEC hydrogen production, solid-state materials for hydrogen storage, and a thin-film hydrogen storage system. Also discussed are the cryogenic storage of hydrogen; liquid hydrogen fuel for ground, air, and naval vehicles; hydrogen-fuel internal combustion engines; the use of hydrogen for domestic, commercial, and industrial applications; hydrogen fuel-cell development; enzyme electrodes for the use of hydrogen-rich fuels in biochemical fuel cells; an analysis of H2-O2 MHD generators; and hydrogen energy technology characterization and evaluation on the basis of an input-output structure.
Experiments and Demonstrations in Physics: Bar-Ilan Physics Laboratory (2nd Edition)
NASA Astrophysics Data System (ADS)
Kraftmakher, Yaakov
2014-08-01
The following sections are included: * Data-acquisition systems from PASCO * ScienceWorkshop 750 Interface and DataStudio software * 850 Universal Interface and Capstone software * Mass on spring * Torsional pendulum * Hooke's law * Characteristics of DC source * Digital storage oscilloscope * Charging and discharging a capacitor * Charge and energy stored in a capacitor * Speed of sound in air * Lissajous patterns * I-V characteristics * Light bulb * Short time intervals * Temperature measurements * Oersted's great discovery * Magnetic field measurements * Magnetic force * Magnetic braking * Curie's point I * Electric power in AC circuits * Faraday's law of induction I * Self-inductance and mutual inductance * Electromagnetic screening * LCR circuit I * Coupled LCR circuits * Probability functions * Photometric laws * Kirchhoff's rule for thermal radiation * Malus' law * Infrared radiation * Irradiance and illuminance
PREFACE: International Workshop on Multi-Rate processes and Hysterisis
NASA Astrophysics Data System (ADS)
Mortell, Michael P.; O'Malley, Robert E.; Pokrovskii, Alexei V.; Sobolev, Vladimir A.
2006-12-01
We are interested in singular perturbation problems and hysteresis as common strongly nonlinear phenomena that occur in many industrial, physical and economic systems. The wording `strongly nonlinear' means that linearization will not encapsulate the observed phenomena. Often these two types of phenomena are manifested for different stages of the same or similar processes. A number of fundamental hysteresis models can be considered as limit cases of time relaxation processes, or admit an approximation by a differential equation which is singular with respect to a particular parameter. However, the amount of interaction between practitioners of theories of systems with time relaxation and systems with hysteresis (and between the `relaxation' and `hysteresis' research communities) is still low. In recent years Ireland has become a home for a series of prestigious International Workshops in Singular Perturbations and Hysteresis: International Workshop on Hysteresis and Multi-scale Asymptotics (University College Cork, Ireland, 17-21 March 2004). Proceedings are published in Journal of Physics: Conference Series 22. International Workshop on Relaxation Oscillations and Hysteresis (University College Cork, Ireland, 1-6 April 2002). The related collection of invited lectures, was published as a volume Singular Perturbations and Hysteresis, SIAM, Philadelphia, 2005. International Workshop on Geometrical Methods of Nonlinear Analysis and Semiconductor Laser Dynamics (University College Cork, Ireland, 5-5 April 2001). A collection of invited papers has been published as a special issue of Proceedings of the Russian Academy of Natural Sciences: Nonlinear dynamics of laser and reacting systems. Among the aims of these workshops were to bring together leading experts in time relaxation and hysteresis phenomena in applied problems; to discuss important problems in areas such as reacting systems, semiconductor lasers, shock phenomena in economic modelling, fluid mechanics, etc with an emphasis on hysteresis and singular perturbations; to learn and to share modern techniques in areas of common interest. The `International Workshop on Multi-Rate Processes and Hysteresis' (University College Cork, Ireland, April 3-8, 2006) brought together more than 50 scientists, actively researching in the areas of dynamical systems with hysteresis and singular perturbations, to analyze these phenomena that occur in many industrial, physical and economic systems. The Workshop has been sponsored by the University College Cork (UCC), the Boole Centre for Research in Informatics, UCC, Cork, the School of Mathematical Sciences UCC, Cork, Science Foundation Ireland and the Irish Mathematical Society. The supportive affiliation of the UK and Republic of Ireland SIAM Section is gratefully acknowledged. The Editors and the Organizers of the Workshop wish to place on record their sincere gratitude to Mr Andrew Zhezherun of University College Cork for both the assistance which he provided to all the presenters at the Workshop, and for the careful formatting of all the manuscripts prior to their being forwarded to the Publisher. More information about the Workshop can be found at http://euclid.ucc.ie/murphys2006.htm Michael P Mortell, Robert E O'Malley, Alexei Pokrovskii and Vladimir Sobolev Editors From left to right: M P Mortell, V Sobolev, R E O'Malley and A Pokrovskii.
The ADAM workshops and meeting summary
NASA Astrophysics Data System (ADS)
Chipperfield, Alan J.
1990-01-01
ADAM is now a major software project; it provides a fully integrated environment for both data reduction and data acquisition. It is being used in Hawaii, Australia and the Canary Islands, as well as the UK, and has been adopted by Starlink as the environment in which Starlink data reduction software should run. One of the most remarkable things about ADAM is that it has been developed as a co-operative effort between groups that are spread across the world. Although the initial system came out of RGO, and ROE provided by far the major effort in designing and implementing the VAX version, various parts of what is now regarded as 'ADAM' have also come from other establishments. Co-ordinating a project being developed in this way is not an easy job, but the somewhat varied parentage of ADAM - although sometimes an administrative nightmare - is also one of its strengths; it is not a system developed in one place to serve the specific needs of that one place. One way in which this development is co-ordinated is by a series of workshops. These have taken place at about 18 month intervals since the first one in late 1985. The workshops are attended by people actively developing and/or making extensive use of ADAM, and provide a forum for detailed discussion of the problems in the current system and plans for its extension. The 1989 ADAM Workshop was held at Cosener's House, Abingdon from 3rd to 7th July 1989. An 'Open Meeting' was held on Friday 30th June at RAL to enable members of the Starlink community to provide input to the Workshop discussions. Before the previous workshop, in Hawaii, a trend had started to emerge for different establishments to plug the gaps in ADAM (which at the time was missing a number of important facilities) with local solutions. The Hawaii Workshop consolidated these local extensions, adopting some and rejecting others. As a result, ADAM, as reviewed by this third workshop, was a much more complete and uniform system, and it was possible to start to look in detail at the various enhancements that were still needed; in particular, to make it efficient as a data reduction environment. This document summarises the conclusions and actions arising from the Workshop and presents brief reports on the discussions, prepared, in most cases, by the session chairmen. Part III consists of documents submitted, prior to the Workshop, for consideration during it; their content was not necessarily endorsed by the Workshop. Part TV consists of those reports and proposals, arising out of Workshop action items, which have already been submitted.
Proceedings of the 1989 ADAM Workshop
NASA Astrophysics Data System (ADS)
Chipperfield, Alan
ADAM is now a major software project; it provides a fully integrated environment for both data reduction and data acquisition. It is being used in Hawaii, Australia and the Canary Islands, as well as the UK, and has been adopted by Starlink as the environment in which Starlink data reduction software should run. One of the most remarkable things about ADAM is that it has been developed as a co-operative effort between groups that are spread across the world. Although the initial system came out of RGO, and ROE provided by far the major effort in designing and implementing the VAX version, various parts of what is now regarded as 'ADAM' have also come from other establishments. Co-ordinating a project being developed in this way is not an easy job, but the somewhat varied parentage of ADAM - although sometimes an administrative nightmare - is also one of its strengths; it is not a system developed in one place to serve the specific needs of that one place. One way in which this development is co-ordinated is by a series of workshops. These have taken place at about 18 month intervals since the first one in late 1985. The workshops are attended by people actively developing and/or making extensive use of ADAM, and provide a forum for detailed discussion of the problems in the current system and plans for its extension. The 1989 ADAM Workshop was held at Cosener's House, Abingdon from 3rd to 7th July 1989. An 'Open Meeting' was held on Friday 30th June at RAL to enable members of the Starlink community to provide input to the Workshop discussions. Before the previous workshop, in Hawaii, a trend had started to emerge for different establishments to plug the gaps in ADAM (which at the time was missing a number of important facilities) with local solutions. The Hawaii Workshop consolidated these local extensions, adopting some and rejecting others. As a result, ADAM, as reviewed by this third workshop, was a much more complete and uniform system, and it was possible to start to look in detail at the various enhancements that were still needed; in particular, to make it efficient as a data reduction environment. This document summarises the conclusions and actions arising from the Workshop and presents brief reports on the discussions, prepared, in most cases, by the session chairmen. Part III consists of documents submitted, prior to the Workshop, for consideration during it; their content was not necessarily endorsed by the Workshop. Part TV consists of those reports and proposals, arising out of Workshop action items, which have already been submitted.
NASA Technical Reports Server (NTRS)
French, Scott W.
1991-01-01
The goals are to show that verifying and validating a software system is a required part of software development and has a direct impact on the software's design and structure. Workshop tasks are given in the areas of statistics, integration/system test, unit and architectural testing, and a traffic controller problem.
1982-12-01
FIRST PRINTING RESOURCES Final - MANAGEMENT INFORMATION SYSTEM (PRMIS) COST AND FINANCIAL WORKSHOP 6. PERFORMING ORG. REPORT NUMBER 7. AUTHOR(@) I...NPPS). Cost and Financial (C&F) is a subsystem of the proposed second Printing Resources Management Information System (PRMIS II). The objectives of the
Workshop I: Systems/Standards/Arrays
NASA Technical Reports Server (NTRS)
Piszczor, Mike; Reed, Brad
2007-01-01
Workshop Format: 1) 1:00 - 3:00 to cover various topics as appropriate; 2) At last SPRAT, conducted Workshop topic on solar cell and array qualification standards. Brad Reed will present update on status of that effort; 3) Second workshop topic: The Future of PV Research within NASA. 4) Any time remaining, specific topics from participants. 5) Reminder for IAPG Members! RECWG today 3:00-5:00 in Federal Room, 2nd Floor OAI. a chart is presented showing: Evaluation of Solar Array Technology Readiness Levels.
NASA Astrophysics Data System (ADS)
Wang, Alexandre; Abe, Sumiyoshi; Li, Wei
2015-04-01
This volume contains 24 contributed papers presented at the 4th International Workshop on Statistical Physics and Mathematics for Complex Systems (SPMCS) held during October 12-16, 2014 in Yichang, China. Each paper was peer-reviewed by at least one referee chosen from a distinguished international panel. The previous three workshops of this series were organized in 2008, 2010, and 2012, in Le Mans, France, Wuhan, China, and Kazan, Russia, respectively. The SPMCS international workshop series is destined mainly to communicate and exchange research results and information on the fundamental challenges and questions in the vanguard of statistical physics, thermodynamics and mathematics for complex systems. More specifically, the topics of interest touch, but are not limited to, the following: • Fundamental aspects in the application of statistical physics and thermodynamics to complex systems and their modeling • Finite size and non-extensive system • Fluctuation theorems and equalities, quantum thermodynamics • Variational principle for random dynamics • Fractal geometry, fractional mathematics More than 50 participants from 7 countries participated in SPMCS-2014. 35 oral contributions were presented at the workshop. We would like to take this opportunity to thank the members of the Scientific Program Committee, many of whom acted as reviewers of the papers and responded promptly. We would also like to thank the organizing committee, the session chairs, the technicians and the students for the smooth running of the whole workshop. Thanks also go to China Three Gorges University who provided generous support for the conference venue, as well as exquisite refreshments for the tea breaks. The workshop was also partially supported by Central China Normal University and the Programme of Introducing Talents of Discipline to Universities under grant NO. B08033. Special thanks are due to Ms Juy Zhu who has done excellent editing work with great effort.
NASA Technical Reports Server (NTRS)
Fujikawa, Gene (Compiler)
2005-01-01
Contents includes papers on the following: JPDO: Inter-Agency Cooperation for the Next Generation ATS; R&T Programs; Integrated CNS Systems and Architectures; Datalink Communication Systems; Navigation, System Demonstrations and Operations; Safety and Security Initiatives Impacting CNS; Global Communications Initiatives; Airborne Internet; Avionics for System-Level Enhancements; SWIM (System Wide Information Management); Weather Products and Data Dissemination Technologies; Airsapce Communication Networks; Surveillance Systems; Workshop Breakouts Sessions and ; ICNS Conference Information.
Avionic Pictorial Tunnel-/Pathway-/Highway-In-The-Sky Workshops
NASA Technical Reports Server (NTRS)
Parrish, Russell V. (Compiler)
2003-01-01
In 1994-96, Langley Research Center held a series of interactive workshops investigating highway-in-the-sky concepts, which enable precise flight path control. These workshops brought together government and industry display designers and pilots to discuss and fly various concepts in an iterative manner. The primary emphasis of the first workshops was the utility and usability of pathways and the pros and cons of various features available. The final workshops were focused on the specific applications to the eXternal Visibility System (XVS) of the NASA High-speed Research Program, which was concerned with replacement of the forward windows in a High-speed Civil Transport with electronic displays and high resolution video cameras to enable a "No-Droop" configuration. The primary concerns in the XVS application were the prevention of display clutter and obscuration of hazards, as the camera image was the primary means of traffic separation in clear visibility conditions. These concerns were not so prominent in the first workshops, which assumed a Synthetic Vision System application in which hazard locations are known and obscuration is handled easily. The resulting consensus concept has been used since in simulation and flight test activities of many Government programs. and other concepts have been influenced by the workshop discussions.
2015-10-26
Conductance in Nanocarbon Thermal Interconnects", in Proceedings of Workshop on Innovative Nanoscale Devices and Systems, Eds. Koji Ishibashi, Stephen M...Workshop on Innovative Nanoscale Devices and Systems, Eds. Viktor Sverdlov, Berry Jonker, Siegfried Selberherr, Koji Ishibashi, Stephen M. Goodnick...Proceedings of Workshop on Innovative Nanoscale Devices and Systems, Eds. Koji Ishibashi, Stephen M. Goodnick, Siegfried Selberherr, Akira Fujiwara (12/2-7
Garley, Ashley; Eckert, Erin; Sie, Ali; Ye, Maurice; Malm, Keziah; Afari, Edwin A; Sawadogo, Mamadou; Herrera, Samantha; Ivanovich, Elizabeth; Ye, Yazoume
2016-05-28
Malaria control interventions in most endemic countries have intensified in recent years and so there is a need for a robust monitoring and evaluation (M&E) system to measure progress and achievements. Providing programme and M&E officers with the appropriate skills is a way to strengthen malaria's M&E systems and enhance information use for programmes' implementation. This paper describes a recent effort in capacity strengthening for malaria M&E in sub-Saharan Africa (SSA). From 2010 to 2014, capacity-strengthening efforts consisted of organizing regional in-person workshops for M&E of malaria programmes for Anglophone and Francophone countries in SSA in collaboration with partners from Ghana and Burkina Faso. Open-sourced online courses were also available in English. A post-workshop assessment was conducted after 5 years to assess the effects of these regional workshops and identify gaps in capacity. The regional workshops trained 181 participants from 28 countries from 2010 to 2014. Trained participants were from ministries of health, national malaria control and elimination programmes, non-governmental organizations, and development partners. The average score (%) for participants' knowledge tests increased from pretest to posttest for Anglophone workshops (2011: 59 vs. 76, 2012: 41 vs. 63, 2013: 51 vs. 73; 2014: 50 vs. 74). Similarly, Francophone workshop posttest scores increased, but were lower than Anglophone due to higher scores at pretest. (2011: 70 vs. 76, 2012: 74 vs. 79, 2013: 61 vs. 68; 2014: 64 vs. 75). Results of the post-workshop assessment revealed that participants retained practical M&E knowledge and skills for malaria programs, but there is a need for a module on malaria surveillance adapted to the pre-elimination context. The workshops were successful because of the curriculum content, facilitation quality, and the engagement of partner institutions with training expertise. Results from the post-workshop assessment will guide the curriculum's development and restructuring for the next phase of workshops. Country-specific malaria M&E capacity needs assessments may also inform this process as countries reduce malaria burden.
Dzurisin, Daniel; Lu, Zhong
2009-01-01
A volcano workshop was held in Washington State, near the U.S. Geological Survey (USGS) Cascades Volcano Observatory. The workshop, hosted by the USGS Volcano Hazards Program (VHP), included more than 40 participants from the United States, the European Union, and Canada. Goals were to promote (1) collaboration among scientists working on active volcanoes and (2) development of new tools for studying volcano deformation. The workshop focused on conventional and emerging techniques, including the Global Positioning System (GPS), borehole strain, interferometric synthetic aperture radar (InSAR), gravity, and electromagnetic imaging, and on the roles of aqueous and magmatic fluids.
ERIC Educational Resources Information Center
Copas, Ernestine M., Ed.; And Others
Proceedings of a workshop on career advancement for women faculty members and administrators within the University System of Georgia are presented. The workshop was a vehicle for faculty development and an experience in networking. Topics include professional writing in science, the humanities, and education; strategies for academic promotion, and…
The Unforgettable Experience of a Workshop on Pythagoras Theorem
ERIC Educational Resources Information Center
Arwani, Salima Shahzad
2011-01-01
The author conducted a workshop with colleagues in which awareness of Pythagoras' theorem was raised. This workshop was an unforgettable event in the author's life because it was the first time that she had interacted with teachers from a different school system, and it allowed her to develop presentation skills and confidence in her own…
78 FR 59065 - Interview Room Recording System Standard and License Plate Reader Standard Workshops
Federal Register 2010, 2011, 2012, 2013, 2014
2013-09-25
.... Space is limited at each workshop, and as a result, only 50 participants will be allowed to register for... organization. Exceptions to this limit may occur, should space allow. Participants planning to attend are responsible for their own travel arrangements. DATES: Both workshops will be held on Saturday, October 19...
DIALOG Users Workshope, August 8-9, 1974. Second Working Conference. Arlington, Virginia.
ERIC Educational Resources Information Center
Federation of Information Users, Pittsburgh, PA.
The workshop had its genesis in the belief that interactive bibliographic data base searching will become an essential function of reference service and that there is a need for indepth training and more communication with suppliers--the on-line system supplier and the data base supplier. The workshop included presentations by data base suppliers,…
Friedman, Charles; Rubin, Joshua; Brown, Jeffrey; Buntin, Melinda; Corn, Milton; Etheredge, Lynn; Gunter, Carl; Musen, Mark; Platt, Richard; Stead, William; Sullivan, Kevin; Van Houweling, Douglas
2015-01-01
The capability to share data, and harness its potential to generate knowledge rapidly and inform decisions, can have transformative effects that improve health. The infrastructure to achieve this goal at scale--marrying technology, process, and policy--is commonly referred to as the Learning Health System (LHS). Achieving an LHS raises numerous scientific challenges. The National Science Foundation convened an invitational workshop to identify the fundamental scientific and engineering research challenges to achieving a national-scale LHS. The workshop was planned by a 12-member committee and ultimately engaged 45 prominent researchers spanning multiple disciplines over 2 days in Washington, DC on 11-12 April 2013. The workshop participants collectively identified 106 research questions organized around four system-level requirements that a high-functioning LHS must satisfy. The workshop participants also identified a new cross-disciplinary integrative science of cyber-social ecosystems that will be required to address these challenges. The intellectual merit and potential broad impacts of the innovations that will be driven by investments in an LHS are of great potential significance. The specific research questions that emerged from the workshop, alongside the potential for diverse communities to assemble to address them through a 'new science of learning systems', create an important agenda for informatics and related disciplines. © The Author 2014. Published by Oxford University Press on behalf of the American Medical Informatics Association.
NASA Technical Reports Server (NTRS)
Moore, Berrien, III; Anderson, James G.; Costanza, Robert; Gates, W. Lawrence; Grew, Priscilla C.; Leinen, Margaret S.; Mayewski, Paul A.; McCarthy, James J.; Sellers, Piers J.
1995-01-01
This report reflects the results of a ten-day workshop convened at the Scripps Institution of Oceanography July 19-28, 1995. The workshop was convened as the first phase of a two part review of the U.S. Global Change Research Program (USGCRP). The workshop was organized to provide a review of the scientific foundations and progress to date in the USGCRP and an assessment of the implications of new scientific insights for future USGCRP and Mission to Planet Earth/Earth Observing System (MTPE/EOS) activities; a review of the role of NASA's MTPE/EOS program in the USGCRP observational strategy; a review of the EOS Data and Information System (EOSDIS) as a component of USGCRP data management activities; and an assessment of whether recent developments in the following areas lead to a need to readjust MTPE/EOS plans. Specific consideration was given to: proposed convergence of U.S. environmental satellite systems and programs, evolving international plans for Earth observation systems, advances in technology, and potential expansion of the role of the private sector. The present report summarizes the findings and recommendations developed by the Committee on Global Change Research on the basis of the presentations, background materials, working group deliberations, and plenary discussions of the workshop. In addition, the appendices include summaries prepared by the six working groups convened in the course of the workshop.
A Multifaceted Mathematical Approach for Complex Systems
DOE Office of Scientific and Technical Information (OSTI.GOV)
Alexander, F.; Anitescu, M.; Bell, J.
2012-03-07
Applied mathematics has an important role to play in developing the tools needed for the analysis, simulation, and optimization of complex problems. These efforts require the development of the mathematical foundations for scientific discovery, engineering design, and risk analysis based on a sound integrated approach for the understanding of complex systems. However, maximizing the impact of applied mathematics on these challenges requires a novel perspective on approaching the mathematical enterprise. Previous reports that have surveyed the DOE's research needs in applied mathematics have played a key role in defining research directions with the community. Although these reports have had significantmore » impact, accurately assessing current research needs requires an evaluation of today's challenges against the backdrop of recent advances in applied mathematics and computing. To address these needs, the DOE Applied Mathematics Program sponsored a Workshop for Mathematics for the Analysis, Simulation and Optimization of Complex Systems on September 13-14, 2011. The workshop had approximately 50 participants from both the national labs and academia. The goal of the workshop was to identify new research areas in applied mathematics that will complement and enhance the existing DOE ASCR Applied Mathematics Program efforts that are needed to address problems associated with complex systems. This report describes recommendations from the workshop and subsequent analysis of the workshop findings by the organizing committee.« less
Hamm, Jon; Sullivan, Kristie; Clippinger, Amy J; Strickland, Judy; Bell, Shannon; Bhhatarai, Barun; Blaauboer, Bas; Casey, Warren; Dorman, David; Forsby, Anna; Garcia-Reyero, Natàlia; Gehen, Sean; Graepel, Rabea; Hotchkiss, Jon; Lowit, Anna; Matheson, Joanna; Reaves, Elissa; Scarano, Louis; Sprankle, Catherine; Tunkel, Jay; Wilson, Dan; Xia, Menghang; Zhu, Hao; Allen, David
2017-06-01
Acute systemic toxicity testing provides the basis for hazard labeling and risk management of chemicals. A number of international efforts have been directed at identifying non-animal alternatives for in vivo acute systemic toxicity tests. A September 2015 workshop, Alternative Approaches for Identifying Acute Systemic Toxicity: Moving from Research to Regulatory Testing, reviewed the state-of-the-science of non-animal alternatives for this testing and explored ways to facilitate implementation of alternatives. Workshop attendees included representatives from international regulatory agencies, academia, nongovernmental organizations, and industry. Resources identified as necessary for meaningful progress in implementing alternatives included compiling and making available high-quality reference data, training on use and interpretation of in vitro and in silico approaches, and global harmonization of testing requirements. Attendees particularly noted the need to characterize variability in reference data to evaluate new approaches. They also noted the importance of understanding the mechanisms of acute toxicity, which could be facilitated by the development of adverse outcome pathways. Workshop breakout groups explored different approaches to reducing or replacing animal use for acute toxicity testing, with each group crafting a roadmap and strategy to accomplish near-term progress. The workshop steering committee has organized efforts to implement the recommendations of the workshop participants. Copyright © 2017 Elsevier Ltd. All rights reserved.
Flywheel energy storage workshop
DOE Office of Scientific and Technical Information (OSTI.GOV)
O`Kain, D.; Carmack, J.
Since the November 1993 Flywheel Workshop, there has been a major surge of interest in Flywheel Energy Storage. Numerous flywheel programs have been funded by the Advanced Research Projects Agency (ARPA), by the Department of Energy (DOE) through the Hybrid Vehicle Program, and by private investment. Several new prototype systems have been built and are being tested. The operational performance characteristics of flywheel energy storage are being recognized as attractive for a number of potential applications. Programs are underway to develop flywheels for cars, buses, boats, trains, satellites, and for electric utility applications such as power quality, uninterruptible power supplies,more » and load leveling. With the tremendous amount of flywheel activity during the last two years, this workshop should again provide an excellent opportunity for presentation of new information. This workshop is jointly sponsored by ARPA and DOE to provide a review of the status of current flywheel programs and to provide a forum for presentation of new flywheel technology. Technology areas of interest include flywheel applications, flywheel systems, design, materials, fabrication, assembly, safety & containment, ball bearings, magnetic bearings, motor/generators, power electronics, mounting systems, test procedures, and systems integration. Information from the workshop will help guide ARPA & DOE planning for future flywheel programs. This document is comprised of detailed viewgraphs.« less
Hamm, Jon; Sullivan, Kristie; Clippinger, Amy J.; Strickland, Judy; Bell, Shannon; Bhhatarai, Barun; Blaauboer, Bas; Casey, Warren; Dorman, David; Forsby, Anna; Garcia-Reyero, Natàlia; Gehen, Sean; Graepel, Rabea; Hotchkiss, Jon; Lowit, Anna; Matheson, Joanna; Reaves, Elissa; Scarano, Louis; Sprankle, Catherine; Tunkel, Jay; Wilson, Dan; Xia, Menghang; Zhu, Hao; Allen, David
2017-01-01
Acute systemic toxicity testing provides the basis for hazard labeling and risk management of chemicals. A number of international efforts have been directed at identifying non-animal alternatives for in vivo acute systemic toxicity tests. A September 2015 workshop, Alternative Approaches for Identifying Acute Systemic Toxicity: Moving from Research to Regulatory Testing, reviewed the state-of-the-science of non-animal alternatives for this testing and explored ways to facilitate implementation of alternatives. Workshop attendees included representatives from international regulatory agencies, academia, nongovernmental organizations, and industry. Resources identified as necessary for meaningful progress in implementing alternatives included compiling and making available high-quality reference data, training on use and interpretation of in vitro and in silico approaches, and global harmonization of testing requirements. Attendees particularly noted the need to characterize variability in reference data to evaluate new approaches. They also noted the importance of understanding the mechanisms of acute toxicity, which could be facilitated by the development of adverse outcome pathways. Workshop breakout groups explored different approaches to reducing or replacing animal use for acute toxicity testing, with each group crafting a roadmap and strategy to accomplish near-term progress. The workshop steering committee has organized efforts to implement the recommendations of the workshop participants. PMID:28069485
Applied Information Systems Research Program (AISRP). Workshop 2: Meeting Proceedings
NASA Technical Reports Server (NTRS)
1992-01-01
The Earth and space science participants were able to see where the current research can be applied in their disciplines and computer science participants could see potential areas for future application of computer and information systems research. The Earth and Space Science research proposals for the High Performance Computing and Communications (HPCC) program were under evaluation. Therefore, this effort was not discussed at the AISRP Workshop. OSSA's other high priority area in computer science is scientific visualization, with the entire second day of the workshop devoted to it.
The Role of Computers in Research and Development at Langley Research Center
NASA Technical Reports Server (NTRS)
Wieseman, Carol D. (Compiler)
1994-01-01
This document is a compilation of presentations given at a workshop on the role cf computers in research and development at the Langley Research Center. The objectives of the workshop were to inform the Langley Research Center community of the current software systems and software practices in use at Langley. The workshop was organized in 10 sessions: Software Engineering; Software Engineering Standards, methods, and CASE tools; Solutions of Equations; Automatic Differentiation; Mosaic and the World Wide Web; Graphics and Image Processing; System Design Integration; CAE Tools; Languages; and Advanced Topics.
Space and Earth Science Data Compression Workshop
NASA Technical Reports Server (NTRS)
Tilton, James C. (Editor)
1991-01-01
The workshop explored opportunities for data compression to enhance the collection and analysis of space and Earth science data. The focus was on scientists' data requirements, as well as constraints imposed by the data collection, transmission, distribution, and archival systems. The workshop consisted of several invited papers; two described information systems for space and Earth science data, four depicted analysis scenarios for extracting information of scientific interest from data collected by Earth orbiting and deep space platforms, and a final one was a general tutorial on image data compression.
Workshop on Technology Development Issues for the Large Deployable Reflector (LDR)
NASA Technical Reports Server (NTRS)
Nishioka, Kenji (Editor)
1986-01-01
The results of the 2nd Large Deployable Reflector (LDR) Technology Review Workshop held at Asilomar, California, March 17 to 22, 1985, are summarized. The workshop was convened to update LDR Technology status and to revise as necessary the results for the first LDR Workshop held in June 1982. There were some 100 participants representing government agencies, industry, and universities. This Workshop's goal was to assess, identify, and set priorities for the LDR technology issues based on requirements identified in the first workshop. Four high-priority technology areas were identified: (1) mirror materials and construction; (2) sensing and controls; (3) system-simulation and modeling capability; and (4) submillimeter instruments. The results of the workshop were used to provide a list of technolgy issues for the development of a technology initiatives plan for the LDR by NASA's Office of Aeronautics and Space Technology.
NASA at the Space & Science Festival
2017-08-05
NASA Acting Chief Technologist Douglas Terrier gives a talk to teachers attending a professional development workshop held in tandem with the Intrepid Space & Science Festival, Saturday, Aug. 5, 2017 at the Intrepid Sea, Air & Space Museum in New York City. The week-long festival featured talks, films and cutting-edge displays showcasing NASA technology. Photo Credit: (NASA/Bill Ingalls)
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-12
... you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for... rulemaking by docket number and other identifying information (subject heading, Federal Register date and... phase for the review. This phase began with a science policy workshop to identify issues and questions...
Photocopy of drawing (this photograph is an 8" x 10" ...
Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1916 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) FREIGHT ELEVATOR, BUILDING NO. 1, GENERAL ARRANGEMENT, SHEET 1 OF 1 - U.S. Naval Air Station, Ship Carpenter's Workshop, 368 South Avenue, Pensacola, Escambia County, FL
Federal Register 2010, 2011, 2012, 2013, 2014
2011-01-27
...) and the air quality criteria on which they are based. In most cases, evaluating the health impacts of... information from multipollutant epidemiologic and exposure studies may be applied to risk and exposure... research needs and approaches that may best inform and characterize the health effects of exposure to...
Greenhouse Effect Detection Experiment (GEDEX). Selected data sets
NASA Technical Reports Server (NTRS)
Olsen, Lola M.; Warnock, Archibald, III
1992-01-01
This CD-ROM contains selected data sets compiled by the participants of the Greenhouse Effect Detection Experiment (GEDEX) workshop on atmospheric temperature. The data sets include surface, upper air, and/or satellite-derived measurements of temperature, solar irradiance, clouds, greenhouse gases, fluxes, albedo, aerosols, ozone, and water vapor, along with Southern Oscillation Indices and Quasi-Biennial Oscillation statistics.
Fourth Computational Aeroacoustics (CAA) Workshop on Benchmark Problems
NASA Technical Reports Server (NTRS)
Dahl, Milo D. (Editor)
2004-01-01
This publication contains the proceedings of the Fourth Computational Aeroacoustics (CAA) Workshop on Benchmark Problems. In this workshop, as in previous workshops, the problems were devised to gauge the technological advancement of computational techniques to calculate all aspects of sound generation and propagation in air directly from the fundamental governing equations. A variety of benchmark problems have been previously solved ranging from simple geometries with idealized acoustic conditions to test the accuracy and effectiveness of computational algorithms and numerical boundary conditions; to sound radiation from a duct; to gust interaction with a cascade of airfoils; to the sound generated by a separating, turbulent viscous flow. By solving these and similar problems, workshop participants have shown the technical progress from the basic challenges to accurate CAA calculations to the solution of CAA problems of increasing complexity and difficulty. The fourth CAA workshop emphasized the application of CAA methods to the solution of realistic problems. The workshop was held at the Ohio Aerospace Institute in Cleveland, Ohio, on October 20 to 22, 2003. At that time, workshop participants presented their solutions to problems in one or more of five categories. Their solutions are presented in this proceedings along with the comparisons of their solutions to the benchmark solutions or experimental data. The five categories for the benchmark problems were as follows: Category 1:Basic Methods. The numerical computation of sound is affected by, among other issues, the choice of grid used and by the boundary conditions. Category 2:Complex Geometry. The ability to compute the sound in the presence of complex geometric surfaces is important in practical applications of CAA. Category 3:Sound Generation by Interacting With a Gust. The practical application of CAA for computing noise generated by turbomachinery involves the modeling of the noise source mechanism as a vortical gust interacting with an airfoil. Category 4:Sound Transmission and Radiation. Category 5:Sound Generation in Viscous Problems. Sound is generated under certain conditions by a viscous flow as the flow passes an object or a cavity.
NASA Technical Reports Server (NTRS)
MacElroy, R. D.; Smernoff, D. T.
1996-01-01
A Workshop on "Nitrogen Dynamics in Controlled Systems" was held September 26-28, 1995 at the Lawrence Berkeley National Laboratory. The meetings were sponsored by the NASA Advanced Life Support program and the Lawrence Berkeley National Laboratory, and hosted by Prof. Lester Packer of the University of California at Berkeley, and of the Lawrence Berkeley National Laboratory. The Workshop participants were asked to: 1. summarize current knowledge on the cycling of nitrogen in closed systems; 2. identify the needs that closed systems may have for specific forms of nitrogen; 3. identify possible ways of generating and maintaining (or avoiding) specific forms and concentrations of nitrogen; 4. compare biological and physical/chemical methods of transforming nitrogen.
Reboot Events Calendar Open Meetings Workshops Reboot Live Video Archives Initiatives Reform Systems Calendar Open Meetings Workshops Reboot Live Video Archives Initiatives Broadband.gov OpenInternet.gov
High-throughput screening (HTS) and modeling of the retinoid ...
Presentation at the Retinoids Review 2nd workshop in Brussels, Belgium on the application of high throughput screening and model to the retinoid system Presentation at the Retinoids Review 2nd workshop in Brussels, Belgium on the application of high throughput screening and model to the retinoid system
Applied Information Systems Research Program (AISRP) Workshop 3 meeting proceedings
NASA Technical Reports Server (NTRS)
1993-01-01
The third Workshop of the Applied Laboratory Systems Research Program (AISRP) met at the Univeristy of Colorado's Laboratory for Atmospheric and Space Physics in August of 1993. The presentations were organized into four sessions: Artificial Intelligence Techniques; Scientific Visualization; Data Management and Archiving; and Research and Technology.
View the summary report of the stakeholder workshop held on November 19, 2015, on greenhouse gas data on petroleum and natural gas systems from the Greenhouse Gas Reporting Program and U.S. Greenhouse Gas Inventory of Emissions and Sinks (GHG Inventory).
Agroforestry Systems in Zimbabwe: Promoting Trees in Agriculture.
ERIC Educational Resources Information Center
Vukasin, Helen L., Ed.
Agroforestry has been defined as a sustainable crop management system which combines the production of forest crops with field crops. In June, 1987, an agroforestry workshop took place in Nyanga, Manicaland, Zimbabwe. This document was prepared to share the information presented at this workshop with other non-government organizations around the…
DOT National Transportation Integrated Search
1981-03-01
This document contains the White Papers on urban-regional modeling presented at the Workshop as well as additional research papers aimed at increasing our understanding of the relationships between transportation and society. The ultimate aim is to p...
NASA Technical Reports Server (NTRS)
Youngblood, Robert; Dezfuli, Homayoon; Siu, Nathan
2010-01-01
In late 2009, the National Aeronautics and Space Administration (NASA) and the U.S. Nuclear Regulatory Commission (NRC) jointly organized a workshop to discuss technical issues associated with application of risk assessments to early phases of system design. The workshop, which was coordinated by the Idaho National Laboratory, involved invited presentations from a number of PRA experts in the aerospace and nuclear fields and subsequent discussion to address the following questions: (a) What technical issues limit decision-makers' confidence in PRA results, especially at a pre-operational phase of the system life cycle? (b) What is being done to address these issues'? (c) What more can be done ? The workshop resulted in participant observations and suggestions on several technical issues, including the pursuit of non-traditional approaches to risk assessment and the verification and validation of risk models. The workshop participants also identified several important non-technical issues, including risk communication with decision makers, and the integration of PRA into the overall design process.
NASA Technical Reports Server (NTRS)
Schubert, Siegfried
2012-01-01
Among the key recommendations of a recent WCRP Workshop on Drought Predictability and Prediction in a Changing Climate is the development of an experimental global drought information system (GDIS). The timeliness of such an effort is evidenced by the wide aITay of relevant ongoing national and international (as well as regional and continental scale) efforts to provide drought information, including the US and North American drought monitors, and various integrating activities such as GEO and the Global Drought Portal. The workshop will review current capabilities and needs, and focus on the steps necessary to develop a GDIS that will build upon the extensive worldwide investments that have already been made in developing drought monitoring (including new space-based observations), drought risk management, and climate prediction capahilities.
Special Issue on "Instanton Counting: Moduli Spaces, Representation Theory, and Integrable Systems"
NASA Astrophysics Data System (ADS)
Bruzzo, Ugo; Sala, Francesco
2016-11-01
This special issue of the Journal of Geometry and Physics collects some papers that were presented during the workshop ;Instanton Counting: Moduli Spaces, Representation Theory, and Integrable Systems; that took place at the Lorentz Center in Leiden, The Netherlands, from 16 to 20 June 2014. The workshop was supported by the Lorentz Center, the ;Geometry and Quantum Theory; Cluster, Centre Européen pour les Mathématiques, la Physique et leurs Interactions (Lille, France), Laboratoire Angevin de Recherche en Mathématiques (Angers, France), SISSA (Trieste, Italy), and Foundation Compositio (Amsterdam, the Netherlands). We deeply thank all these institutions for making the workshop possible. We also thank the other organizers of the workshop, Professors Dimitri Markushevich, Vladimir Rubtsov and Sergey Shadrin, for their efforts and great collaboration.
VIII Workshop on Catastrophic Disruption in the Solar System
NASA Astrophysics Data System (ADS)
Michel, Patrick; Nakamura, Akiko M.; Bagatin, Adriano Campo
2015-03-01
The Catastrophic Disruption (CD) Workshops have become a tradition for the various communities interested in collisional processes. The first one was organized in 1985 by the missed Prof. Paolo Farinella from the University of Pisa and his colleague Paolo Paolicchi, who understood the fundamental importance of collisional processes in the history of the Solar System. It was followed by subsequent workshops in Belgrade (Serbia, 1987), Kyoto (Japan, 1990), Gubbio (Italy, 1993), the Timberline Lodge (Oregon, USA, 1998), Cannes (France, 2003) and Alicante (Spain, 2007). The CD workshops are typically separated by 3-6 years, accounting for the required amount of time to perform subsequent advances in the field motivating the interest of the relevant scientific community for getting together to discuss new results and evolving directions in the field.
Fourth NASA Langley Formal Methods Workshop
NASA Technical Reports Server (NTRS)
Holloway, C. Michael (Compiler); Hayhurst, Kelly J. (Compiler)
1997-01-01
This publication consists of papers presented at NASA Langley Research Center's fourth workshop on the application of formal methods to the design and verification of life-critical systems. Topic considered include: Proving properties of accident; modeling and validating SAFER in VDM-SL; requirement analysis of real-time control systems using PVS; a tabular language for system design; automated deductive verification of parallel systems. Also included is a fundamental hardware design in PVS.
Workshop on technology issues of superconducting Maglev transportation systems
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wegrzyn, J.E.; Shaw, D.T.
1991-09-27
There exists a critical need in the United States to improve its ground transportation system. One suggested system that offers many advantages over the current transportation infrastructure is Maglev. Maglev represents the latest evolution in very high and speed ground transportation, where vehicles are magnetically levitated, guided, and propelled over elevated guideways at speeds of 300 miles per hour. Maglev is not a new concept but is, however, receiving renewed interest. The objective of this workshop was to further promote these interest by bringing together a small group of specialists in Maglev technology to discuss Maglev research needs and tomore » identify key research issues to the development of a successful Maglev system. The workshop was organized into four sessions based on the following technical areas: Materials, Testing, and Shielding; Magnet Design and Cryogenic Systems; Propulsion and Levitation Systems; and, System Control and Integration.« less
Technical Report Series on Global Modeling and Data Assimilation, Volume 41 : GDIS Workshop Report
NASA Technical Reports Server (NTRS)
Koster, Randal D. (Editor); Schubert, Siegfried; Pozzi, Will; Mo, Kingtse; Wood, Eric F.; Stahl, Kerstin; Hayes, Mike; Vogt, Juergen; Seneviratne, Sonia; Stewart, Ron;
2015-01-01
The workshop "An International Global Drought Information System Workshop: Next Steps" was held on 10-13 December 2014 in Pasadena, California. The more than 60 participants from 15 countries spanned the drought research community and included select representatives from applications communities as well as providers of regional and global drought information products. The workshop was sponsored and supported by the US National Integrated Drought Information System (NIDIS) program, the World Climate Research Program (WCRP: GEWEX, CLIVAR), the World Meteorological Organization (WMO), the Group on Earth Observations (GEO), the European Commission Joint Research Centre (JRC), the US Climate Variability and Predictability (CLIVAR) program, and the US National Oceanic and Atmospheric Administration (NOAA) programs on Modeling, Analysis, Predictions and Projections (MAPP) and Climate Variability & Predictability (CVP). NASA/JPL hosted the workshop with logistical support provided by the GEWEX program office. The goal of the workshop was to build on past Global Drought Information System (GDIS) progress toward developing an experimental global drought information system. Specific goals were threefold: (i) to review recent research results focused on understanding drought mechanisms and their predictability on a wide range of time scales and to identify gaps in understanding that could be addressed by coordinated research; (ii) to help ensure that WRCP research priorities mesh with efforts to build capacity to address drought at the regional level; and (iii) to produce an implementation plan for a short duration pilot project to demonstrate current GDIS capabilities. See http://www.wcrp-climate.org/gdis-wkshp-2014-objectives for more information.
NASA Astrophysics Data System (ADS)
Kortenkamp, S.; Baldridge, A. M.; Bleamaster, L. F.; Buxner, S.; Canizo, T.; Crown, D. A.; Lebofsky, L. A.
2012-12-01
The Planetary Science Institute (PSI), in partnership with the Tucson Regional Science Center, offers a series of professional development workshops targeting K-8 science teachers in southern Arizona. Using NASA data sets, research results, and a team of PSI scientists and educators, our workshops provide teachers with in-depth content knowledge of fundamental concepts in astronomy, geology, and planetary science. Current workshops are: The Earth-Moon System, Exploring the Terrestrial Planets, Impact Cratering, The Asteroid-Meteorite Connection, Volcanoes of the Solar System, Deserts of the Solar System, and Astrobiology and the Search for Extrasolar Planets. Several workshops incorporate customized computer visualizations developed at PSI. These visualizations are designed to help teachers overcome the common misconceptions students have in fundamental areas of space science. For example, the simple geometric relationship between the sun, the moon, and Earth is a concept that is rife with misconceptions. How can the arrangement of these objects account for the constantly changing phases of the moon as well as the occasional eclipses of the sun and moon? Students at all levels often struggle to understand the explanation for phases and eclipses even after repeated instruction over many years. Traditional classroom techniques have proven to be insufficient at rooting out entrenched misconceptions. One problem stems from the difficulty of developing an accurate mental picture of the Earth-Moon system in space when a student's perspective has always been firmly planted on the ground. To address this problem our visualizations take the viewers on a journey beyond Earth, giving them a so-called "god's eye" view of how the Earth-Moon system would look from a distance. To make this journey as realistic as possible we use ray-tracing software, incorporate NASA mission images, and accurately portray rotational and orbital motion. During a workshop our visualizations are used in conjunction with more traditional classroom techniques. This combination instills a greater confidence in teachers' understanding of the concepts and therefore increases their ability to teach their students. To date we have produced over 100 unique visualizations to demonstrate many different fundamental concepts in the Earth and space sciences. Participants in each workshop are provided with digital copies of the visualizations in a variety of file formats. They also receive Keynote and PowerPoint templates pre-embedded with the visualizations to facility straightforward use on Macs or PCs in their classrooms. A measure of the success of PSI's workshops is that nearly 50% of our teachers have attended multiple workshops, and teachers often cite the visualizations as one of the top benefits of their experience. Details of our workshops as well as downloadable examples of some visualizations can be found at: www.psi.edu/epo. This work is supported by NASA EPOESS award NNX10AE56G: Workshops in Science Education and Resources (WISER): Planetary Perspectives.
ERIC Educational Resources Information Center
Graham, Patricia Albjerg, Ed.; Stacey, Nevzer G., Ed.
The Committee on the Impact of the Changing Economy on the Education System of the Center for Education, National Research Council, held a workshop to discuss changes in postsecondary education practices in response to economic factors. The report results from the Committees deliberations, the discussions at the workshop, and the papers prepared…
Workshop on perinatal exposure to dioxin-like compounds. I. Summary.
Lindström, G; Hooper, K; Petreas, M; Stephens, R; Gilman, A
1995-01-01
An international workshop reviewed 20 ongoing or recently completed studies of the effects of perinatal exposures to dioxins, dibenzofurans, and PCBs on the reproductive, endocrine, neurodevelopmental, and immune systems. Many of the observed effects are consistent with these compounds acting as "environmental hormones" or endocrine disrupters. This report summarizes the conclusions and future directions described at the workshop. PMID:7614935
ERIC Educational Resources Information Center
Alameda Coll., CA.
Summaries are presented of workshop presentations which examined instructional practices that have been used successfully by community college faculty. The report first outlines the workshop agenda and then presents a position paper by Barbara E. M. Cannon, who notes that improved instructional delivery systems are a prerequisite for the success…
Space Mechanisms Technology Workshop
NASA Technical Reports Server (NTRS)
Oswald, Fred B. (Editor)
2001-01-01
The Mechanical Components Branch at NASA Glenn Research Center hosted a workshop to discuss the state of drive systems technology needed for space exploration. The Workshop was held Thursday, November 2, 2000. About 70 space mechanisms experts shared their experiences from working in this field and considered technology development that will be needed to support future space exploration in the next 10 to 30 years.
Multi-Functional UV-Visible-IR Nanosensors Devices and Structures
2015-04-29
Dual-Gate MOSFET System, Proceedings of the International Workshop on Computational Electronics, Nara, Japan, Society of Micro- and Nanoelectronics ...International Workshop on Computational Electronics, Nara, Japan, Society of Micro- and Nanoelectronics , 216-217 (2013); ISBN 978-3-901578-26-7 M. S...Raman Spectroscopy, Proceedings of the International Workshop on Computational Electronics, Nara, Japan, Society of Micro- and Nanoelectronics , 198
Proceedings of the Workshop on Microtechnologies and Applications to Space Systems
NASA Technical Reports Server (NTRS)
Wilson, B. A. (Editor)
1993-01-01
This volume serves as the Proceedings of this workshop. It contains the manuscripts provided by plenary and parallel session presenters, and summary reports generated from this material and from information presented during the panel discussions. Where manuscripts were not provided, extended abstracts, if available, have been included. The order of the papers follows the original workshop agenda.
Time-Accurate Numerical Simulations of Synthetic Jet Quiescent Air
NASA Technical Reports Server (NTRS)
Rupesh, K-A. B.; Ravi, B. R.; Mittal, R.; Raju, R.; Gallas, Q.; Cattafesta, L.
2007-01-01
The unsteady evolution of three-dimensional synthetic jet into quiescent air is studied by time-accurate numerical simulations using a second-order accurate mixed explicit-implicit fractional step scheme on Cartesian grids. Both two-dimensional and three-dimensional calculations of synthetic jet are carried out at a Reynolds number (based on average velocity during the discharge phase of the cycle V(sub j), and jet width d) of 750 and Stokes number of 17.02. The results obtained are assessed against PIV and hotwire measurements provided for the NASA LaRC workshop on CFD validation of synthetic jets.
Proceedings of the Workshop on software tools for distributed intelligent control systems
DOE Office of Scientific and Technical Information (OSTI.GOV)
Herget, C.J.
1990-09-01
The Workshop on Software Tools for Distributed Intelligent Control Systems was organized by Lawrence Livermore National Laboratory for the United States Army Headquarters Training and Doctrine Command and the Defense Advanced Research Projects Agency. The goals of the workshop were to the identify the current state of the art in tools which support control systems engineering design and implementation, identify research issues associated with writing software tools which would provide a design environment to assist engineers in multidisciplinary control design and implementation, formulate a potential investment strategy to resolve the research issues and develop public domain code which can formmore » the core of more powerful engineering design tools, and recommend test cases to focus the software development process and test associated performance metrics. Recognizing that the development of software tools for distributed intelligent control systems will require a multidisciplinary effort, experts in systems engineering, control systems engineering, and compute science were invited to participate in the workshop. In particular, experts who could address the following topics were selected: operating systems, engineering data representation and manipulation, emerging standards for manufacturing data, mathematical foundations, coupling of symbolic and numerical computation, user interface, system identification, system representation at different levels of abstraction, system specification, system design, verification and validation, automatic code generation, and integration of modular, reusable code.« less
Credit BG. View looking northeast at southwestern side of Test ...
Credit BG. View looking northeast at southwestern side of Test Stand "D" complex. Test Stand "D" workshop (Building 4222/E-23) is at left; shed to its immediate right is an entrance to underground tunnel system which interconnects all test stands. To the right of Test Stand "D" tower are four Clayton water-tube flash boilers once used in the Steam Generator Plant 4280/E-81 to power the vacuum ejector system at "D" and "C" stands. A corner of 4280/E-81 appears behind the boilers. Boilers were removed as part of stand dismantling program. The Dv (vertical vacuum) Test Cell is located in the Test Stand "D" tower, behind the sunscreen on the west side. The top of the tower contains a hoist for lifting or lowering rocket engines into the Dv Cell. Other equipment mounted in the tower is part of the steam-driven vacuum ejector system - Jet Propulsion Laboratory Edwards Facility, Test Stand D, Edwards Air Force Base, Boron, Kern County, CA
Proceedings of the Mars Global Network Mission Workshop
NASA Technical Reports Server (NTRS)
Sturms, Francis M., Jr. (Editor)
1990-01-01
A workshop on the Mars Global Network Mission held at the Jet Propulsion Laboratory (JPL) on February 6 and 7, 1990, was attended by 68 people from JPL, National Aeronautics and Space Administration centers, universities, national laboratories, and industry. Three working sessions on science and exploration objectives, mission and system design concepts, and subsystem technology readiness each addressed three specific questions on implementation concepts for the mission. The workshop generated conclusions for each of the nine questions and also recommended several important science and engineering issues to be studied subsequent to the workshop.
Nambu-Goldstone theorem and spin-statistics theorem
NASA Astrophysics Data System (ADS)
Fujikawa, Kazuo
On December 19-21 in 2001, we organized a yearly workshop at Yukawa Institute for Theoretical Physics in Kyoto on the subject of "Fundamental Problems in Field Theory and their Implications". Prof. Yoichiro Nambu attended this workshop and explained a necessary modification of the Nambu-Goldstone theorem when applied to nonrelativistic systems. At the same workshop, I talked on a path integral formulation of the spin-statistics theorem. The present essay is on this memorable workshop, where I really enjoyed the discussions with Nambu, together with a short comment on the color freedom of quarks.
Cockpit Electronic Display Workshop: A Synopsis
DOT National Transportation Integrated Search
1993-12-01
Thirty-six government, academic, and industry human factors professionals participated : in a workshop convened at the Voipe National Transportation Systems Center to identify : human factors issues associated with depicting terminal area operations ...
USDA-ARS?s Scientific Manuscript database
This Special Issue of Bioresource Technology is dedicated to selected contributions presented at the international Workshop: “Livestock waste treatment systems of the future: A challenge to environmental quality, food safety, and sustainability,” held 2-4 April, 2008, in Florence, South Carolina (US...
First Montreal Workshop on Videotex Technology. Document de travail #112.
ERIC Educational Resources Information Center
Ball, A.; And Others
This report presents eight papers prepared for a workshop held in June 1980, which was planned to exchange ideas and experiences about, and arrive at a better understanding of, the technological issues that have an impact on videotex systems and their use. Papers emphasize alternative architectures for present and future videotex systems; database…
ERIC Educational Resources Information Center
Norsworthy, Kathryn L.; Khuankaew, Ouyporn
2004-01-01
Refugee and internally displaced women of Burma examined structural and institutional violence against women within their communities within workshop formats. Group members also discussed strategies for transforming systems supporting gender-based violence into structures of peace and gender justice. The authors describe their methodology, based…
An Undergraduate Research Experience Studying Ras and Ras Mutants
ERIC Educational Resources Information Center
Griffeth, Nancy; Batista, Naralys; Grosso, Terri; Arianna, Gianluca; Bhatia, Ravnit; Boukerche, Faiza; Crispi, Nicholas; Fuller, Neno; Gauza, Piotr; Kingsbury, Lyle; Krynski, Kamil; Levine, Alina; Ma, Rui Yan; Nam, Jennifer; Pearl, Eitan; Rosa, Alessandro; Salarbux, Stephanie; Sun, Dylan
2016-01-01
Each January from 2010 to 2014, an undergraduate workshop on modeling biological systems was held at Lehman College of the City University of New York. The workshops were funded by a National Science Foundation (NSF) Expedition in Computing, "Computational Modeling and Analysis of Complex Systems (CMACS)." The primary goal was to…
ERIC Educational Resources Information Center
Read, Aaron
2013-01-01
The rise of stakeholder centered software development has led to organizations engaging users early in the development process to help define system requirements. To facilitate user involvement in the requirements elicitation process, companies can use Group Support Systems (GSS) to conduct requirements elicitation workshops. The effectiveness of…
1987-11-01
The purpose of the workshop was to bring together people whose interests lie in the areas of operating I systems , programming languages, and formal... operating system support, and applications. There were parallel discussions on scheduling and distributed languages, and on real-time and operating ...number of key challenges: * Distributed systems , languages, environments - Make transactions efficient. Integrate them into the operating system
Climate Change at the Poles: Research Immersion Experience at Bellingshausen, Antarctica
NASA Astrophysics Data System (ADS)
Alexeev, V. A.; Repina, I. A.; Baeseman, J. L.; Fernandoy, F.; Bart, S.
2010-12-01
We brought a party of 15 scientists, graduate students, and educators to King George Island, the largest of the South Shetland Islands, just off the Antarctic Peninsula, for an international workshop on Antarctica and global climate change in January 2010. Participants included professors, young scientists and graduate students from the Obukhov Institute of Atmospheric Physics, the University of Maryland, the University of Wisconsin, and the Michigan Technological University. Lindsay Bartholomew, an education and outreach specialist at the Museum of Science and Industry in Chicago connected the workshop via video and Internet with an audience of museum visitors. Scientists living and working at Bellingshausen, including Hans-Ulrich Peter, an eminent ecologist from Jena University (Germany), and Bulat Movlyudov (Institute of Geography, Moscow), a distinguished glaciologist, participated in the workshop. Field trips led by Peter and Movlyudov and others were made by day and lectures were held by night. Professors and graduate students made cutting-edge presentations on such subjects as permafrost, glaciology, and global climate models. Three workshop teams conducted field research projects at the foot of the Bellingshausen Dome icecap - two on carbon cycling and one on permafrost. Major funding sources for the workshop included the Russian Foundation for Basic Research (Russia), Wilderness Research Foundation (USA), NSF, University of Wisconsin at Stevens Point, Alfred Wegener Institute (Germany) and Museum for Science and Industry (Chicago). INACH, the Chilean Antarctic Institute, and IAU, the Uruguayan Antarctic Institute, provided air charter services. On King George Island, our group was billeted at Russia’s Bellingshausen science station.
Understanding the North Atlantic Oscillation and Its Effects in the Mediterranean
NASA Astrophysics Data System (ADS)
Trigo, Ricardo M.; Serrano, Sergio M. Vicente
2010-11-01
ESF-MedCLIVAR Workshop on Hydrological, Socioeconomic and Ecological Impacts of the North Atlantic Oscillation in the Mediterranean; Zaragoza, Spain, 24-27 May 2010; According to the latest Intergovernmental Panel on Climate Change report, the Mediterranean basin represents one of the most important hot spots of climate change in the world, with recent trends toward a hotter and drier climate being related to changes in atmospheric circulation patterns. Among these patterns the North Atlantic Oscillation (NAO) is the most important one and the only one that exerts a clear influence throughout the year, although with stronger intensity and extension during winter. In the framework of the European Science Foundation's Mediterranean Climate Variability and Predictability (MedCLIVAR) program (http://www.medclivar.eu/), a thematic workshop devoted to the hydrological, socioeconomic, and ecological impacts of the NAO in the Mediterranean area was held in Spain. The main objective of this 3-day workshop was to foster interaction in this increasingly interdisciplinary topic, in particular, among climatologists, hydrologists, geographers, agronomists, biologists, and other scientists. The workshop was attended by 62 participants from 15 different countries and included a mix of senior scientists and graduate students. The workshop was divided into five sessions focusing on (1) natural hazards, including droughts, severe precipitations, floods, heat waves, and cold spells; (2) vegetation activity and agriculture production; (3) natural ecosystems and environment, including forest dynamics, fisheries, dynamics of animal populations, and air quality; (4) geomorphology, including landslides and debris flows, erosivity mechanisms, and surface erosion processes; and (5) renewable energies production, including hydraulic, eolic, and solar.
Report from the Passive Microwave Data Set Management Workshop
NASA Technical Reports Server (NTRS)
Armstrong, Ed; Conover, Helen; Goodman, Michael; Krupp, Brian; Liu, Zhong; Moses, John; Ramapriyan, H. K.; Scott, Donna; Smith, Deborah; Weaver, Ronald
2011-01-01
Passive microwave data sets are some of the most important data sets in the Earth Observing System Data and Information System (EOSDIS), providing data as far back as the early 1970s. The widespread use of passive microwave (PM) radiometer data has led to their collection and distribution over the years at several different Earth science data centers. The user community is often confused by this proliferation and the uneven spread of information about the data sets. In response to this situation, a Passive Microwave Data Set Management Workshop was held 17 ]19 May 2011 at the Global Hydrology Resource Center, sponsored by the NASA Earth Science Data and Information System (ESDIS) Project. The workshop attendees reviewed all primary (Level 1 ]3) PM data sets from NASA and non ]NASA sensors held by NASA Distributed Active Archive Centers (DAACs), as well as high ]value data sets from other NASA ]funded organizations. This report provides the key findings and recommendations from the workshop as well as detailed tabluations of the datasets considered.
Friedman, Charles; Rubin, Joshua; Brown, Jeffrey; Buntin, Melinda; Corn, Milton; Etheredge, Lynn; Gunter, Carl; Musen, Mark; Platt, Richard; Stead, William; Sullivan, Kevin; Van Houweling, Douglas
2015-01-01
Objective The capability to share data, and harness its potential to generate knowledge rapidly and inform decisions, can have transformative effects that improve health. The infrastructure to achieve this goal at scale—marrying technology, process, and policy—is commonly referred to as the Learning Health System (LHS). Achieving an LHS raises numerous scientific challenges. Materials and methods The National Science Foundation convened an invitational workshop to identify the fundamental scientific and engineering research challenges to achieving a national-scale LHS. The workshop was planned by a 12-member committee and ultimately engaged 45 prominent researchers spanning multiple disciplines over 2 days in Washington, DC on 11–12 April 2013. Results The workshop participants collectively identified 106 research questions organized around four system-level requirements that a high-functioning LHS must satisfy. The workshop participants also identified a new cross-disciplinary integrative science of cyber-social ecosystems that will be required to address these challenges. Conclusions The intellectual merit and potential broad impacts of the innovations that will be driven by investments in an LHS are of great potential significance. The specific research questions that emerged from the workshop, alongside the potential for diverse communities to assemble to address them through a ‘new science of learning systems’, create an important agenda for informatics and related disciplines. PMID:25342177
2014-01-01
Background The Theory of Change (ToC) approach has been used to develop and evaluate complex health initiatives in a participatory way in high income countries. Little is known about its use to develop mental health care plans in low and middle income countries where mental health services remain inadequate. Aims ToC workshops were held as part of formative phase of the Programme for Improving Mental Health Care (PRIME) in order 1) to develop a structured logical and evidence-based ToC map as a basis for a mental health care plan in each district; (2) to contextualise the plans; and (3) to obtain stakeholder buy-in in Ethiopia, India, Nepal, South Africa and Uganda. This study describes the structure and facilitator’s experiences of ToC workshops. Methods The facilitators of the ToC workshops were interviewed and the interviews were recorded, transcribed and analysed together with process documentation from the workshops using a framework analysis approach. Results Thirteen workshops were held in the five PRIME countries at different levels of the health system. The ToC workshops achieved their stated goals with the contributions of different stakeholders. District health planners, mental health specialists, and researchers contributed the most to the development of the ToC while service providers provided detailed contextual information. Buy-in was achieved from all stakeholders but valued more from those in control of resources. Conclusions ToC workshops are a useful approach for developing ToCs as a basis for mental health care plans because they facilitate logical, evidence based and contextualised plans, while promoting stakeholder buy in. Because of the existing hierarchies within some health systems, strategies such as limiting the types of participants and stratifying the workshops can be used to ensure productive workshops. PMID:24808923
Proceedings of the Ocean Climate Data Workshop
NASA Technical Reports Server (NTRS)
Churgin, James (Compiler)
1992-01-01
The First Consultative Meeting on Responsible National Oceanographic Data Centres (RNODC's) and Climate DataServices met in February 1988 and made a number of recommendations related to improving services to meet the needs of climate programmes. Included in these discussions was a recommendation for a Workshop on Ocean Climate Data Management. This workshop will be talking about ways to establish a Global Ocean Observing System (GOOS).
ERIC Educational Resources Information Center
United Nations Educational, Scientific, and Cultural Organization, Bangkok (Thailand). Regional Office for Education in Asia and Oceania.
This publication reports on a Regional Workshop held in New Delhi, India, in January 1980, to study major trends in the development of educational goals in Asia. Discussed at the workshops were educational goals, policies, and problems; how belief systems and ethical values affect educational goals; and the role of regional and international…
ERIC Educational Resources Information Center
Estey, Nancy; MacIsaac, Maitland; Rendell, Sandra
Based on the understanding that the capacity to learn is optimized in the early years, Early Learning Canada (ELC) is a community workshop program for parents and adults who work with children from birth to age 6 and their families to facilitate life-long learning. This workshop leader guide explains the ELC principles, examines learning styles…
ERIC Educational Resources Information Center
Chin Roemer, Robin; Greer, Rebecca
2016-01-01
Research workshops are designed to help students develop skills that go beyond the scope of one-shot library sessions. However, with more students conducting research off-campus, online, and in the evening, workshops targeted towards complex skills and competencies are difficult to offer. But what if librarians were to design and deliver intensive…
First Annual High-Speed Research Workshop, part 2
NASA Technical Reports Server (NTRS)
Whitehead, Allen H., Jr. (Compiler)
1992-01-01
This workshop provided a national forum for presenting and discussing important technology issues related to the definition of an economically viable and environmentally compatible High Speed Civil Transport. The workshop was organized into 13 sessions. This volume is part 2 of 4 and covers 4 of the 13 sessions: (1) source noise; (2) sonic boom (aerodynamic performance); (3) propulsion systems studies; and (4) emission reduction.
Photocopy of drawing (this photograph is an 8" x 10" ...
Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1987 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) RENOVATED STORAGE AREA, MEZZANINE LEVEL, BUILDING NO. 1, ARCHITECTURAL FLOOR PLAN AND DETAILS, SHEET 1 OF 2 - U.S. Naval Air Station, Ship Carpenter's Workshop, 368 South Avenue, Pensacola, Escambia County, FL
Photocopy of drawing (this photograph is an 8" x 10" ...
Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1991 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) INTERIOR MODIFICATION SECOND FLOOR, BUILDING NO. 1, ARCHITECTURAL PLANS, SECTIONS AND SCHEDULES, SHEET 1 OF 3 - U.S. Naval Air Station, Ship Carpenter's Workshop, 368 South Avenue, Pensacola, Escambia County, FL
Photocopy of drawing (this photograph is an 8" x 10" ...
Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1983 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) CORRECT FIRE/SAFETY DEFICIENCIES, BUILDING NO. 1, SECTIONS AND DETAILS, SHEET 3 OF 3 - U.S. Naval Air Station, Ship Carpenter's Workshop, 368 South Avenue, Pensacola, Escambia County, FL
JPRS Report Science and Technology: Japan ISTEC Superconductivity Workshop.
1989-05-03
Y20z and CuO mixed powders of an appropriate composition. Starting materials were mixed in alcohol and heated at 930°C for 12 h in air. Such calcining...650 Bi 5 500 BKBO 3 Ä/sec Table 2 Typical Oxydation conditions Ion energy 50 eV Ion current density 150 u.A/’em2 (before
Photocopy of drawing (this photograph is an 8" x 10" ...
Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; ca. 1910 original architectural drawing located at National Archives and Records Administration NARA) PLAN OF BUILDING NO.1 BOAT, SHIPWRIGHT AND JOINER SHOP, SHEET 2 OF 4 - U.S. Naval Air Station, Ship Carpenter's Workshop, 368 South Avenue, Pensacola, Escambia County, FL
Photocopy of drawing (this photograph is an 8" x 10" ...
Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1923 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) PLAN OF BUILDING NO. 1 JOINER, FABRIC AND PAINT SHOP, PROPOSED LOCATION OF RADIATORS - U.S. Naval Air Station, Ship Carpenter's Workshop, 368 South Avenue, Pensacola, Escambia County, FL
Photocopy of drawing (this photograph is an 8" x 10" ...
Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1983 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) CORRECT FIRE/SAFETY DEFICIENCIES, BUILDING NO. 1, FIRE PROTECTION CEILING PLANS, SHEET 2 OF 3 - U.S. Naval Air Station, Ship Carpenter's Workshop, 368 South Avenue, Pensacola, Escambia County, FL