Science.gov

Sample records for aircraft liquor kits

  1. 19 CFR 122.132 - Sealing of aircraft liquor kits.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Sealing of aircraft liquor kits. 122.132 Section... OF THE TREASURY AIR COMMERCE REGULATIONS Aircraft Liquor Kits § 122.132 Sealing of aircraft liquor kits. (a) Sealing required. Aircraft liquor kits shall be sealed on board the aircraft by...

  2. 19 CFR 122.132 - Sealing of aircraft liquor kits.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false Sealing of aircraft liquor kits. 122.132 Section... OF THE TREASURY AIR COMMERCE REGULATIONS Aircraft Liquor Kits § 122.132 Sealing of aircraft liquor kits. (a) Sealing required. Aircraft liquor kits shall be sealed on board the aircraft by...

  3. 19 CFR 122.132 - Sealing of aircraft liquor kits.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false Sealing of aircraft liquor kits. 122.132 Section... OF THE TREASURY AIR COMMERCE REGULATIONS Aircraft Liquor Kits § 122.132 Sealing of aircraft liquor kits. (a) Sealing required. Aircraft liquor kits shall be sealed on board the aircraft by...

  4. 19 CFR 122.132 - Sealing of aircraft liquor kits.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Sealing of aircraft liquor kits. 122.132 Section... OF THE TREASURY AIR COMMERCE REGULATIONS Aircraft Liquor Kits § 122.132 Sealing of aircraft liquor kits. (a) Sealing required. Aircraft liquor kits shall be sealed on board the aircraft by...

  5. 19 CFR 122.132 - Sealing of aircraft liquor kits.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... taken to an authorized airline in-bond liquor storeroom. (b) Exception. When an aircraft is traveling... approved seals. The airline shall use seals supplied by an approved manufacturer, as provided in part 24 of... (2) Authorized airline personnel, in an authorized airline in-bond liquor storeroom. (e)...

  6. 19 CFR 122.135 - When airline has in-bond liquor storeroom.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false When airline has in-bond liquor storeroom. 122.135...; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Aircraft Liquor Kits § 122.135 When airline has in-bond... airline involved has an authorized in-bond liquor storeroom may be removed and restocked in the...

  7. 19 CFR 122.134 - When airline does not have in-bond liquor storeroom.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 1 2014-04-01 2014-04-01 false When airline does not have in-bond liquor... SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Aircraft Liquor Kits § 122.134 When airline... where the airline involved does not have an authorized in-bond liquor storeroom. When this occurs,...

  8. 19 CFR 122.134 - When airline does not have in-bond liquor storeroom.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 1 2013-04-01 2013-04-01 false When airline does not have in-bond liquor... SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Aircraft Liquor Kits § 122.134 When airline... where the airline involved does not have an authorized in-bond liquor storeroom. When this occurs,...

  9. 19 CFR 122.135 - When airline has in-bond liquor storeroom.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 1 2013-04-01 2013-04-01 false When airline has in-bond liquor storeroom. 122.135...; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Aircraft Liquor Kits § 122.135 When airline has in-bond... airline involved has an authorized in-bond liquor storeroom may be removed and restocked in the...

  10. 19 CFR 122.135 - When airline has in-bond liquor storeroom.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false When airline has in-bond liquor storeroom. 122.135...; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Aircraft Liquor Kits § 122.135 When airline has in-bond... airline involved has an authorized in-bond liquor storeroom may be removed and restocked in the...

  11. 19 CFR 122.134 - When airline does not have in-bond liquor storeroom.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false When airline does not have in-bond liquor... SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Aircraft Liquor Kits § 122.134 When airline... where the airline involved does not have an authorized in-bond liquor storeroom. When this occurs,...

  12. 19 CFR 122.135 - When airline has in-bond liquor storeroom.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false When airline has in-bond liquor storeroom. 122.135...; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Aircraft Liquor Kits § 122.135 When airline has in-bond... airline involved has an authorized in-bond liquor storeroom may be removed and restocked in the...

  13. 19 CFR 122.135 - When airline has in-bond liquor storeroom.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false When airline has in-bond liquor storeroom. 122.135...; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Aircraft Liquor Kits § 122.135 When airline has in-bond... airline involved has an authorized in-bond liquor storeroom may be removed and restocked in the...

  14. 19 CFR 122.134 - When airline does not have in-bond liquor storeroom.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false When airline does not have in-bond liquor... SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Aircraft Liquor Kits § 122.134 When airline... where the airline involved does not have an authorized in-bond liquor storeroom. When this occurs,...

  15. 19 CFR 122.134 - When airline does not have in-bond liquor storeroom.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false When airline does not have in-bond liquor... SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Aircraft Liquor Kits § 122.134 When airline... where the airline involved does not have an authorized in-bond liquor storeroom. When this occurs,...

  16. 49 CFR 173.161 - Chemical kits and first aid kits.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... transportation by passenger aircraft or cargo aircraft may not be included in the kits. (2) The packing group... so there will be no possibility of the mixture of contents causing dangerous evolution of heat or gas... pollutant, or is offered for transportation and transported by aircraft or vessel. Chemical kits and...

  17. 49 CFR 173.161 - Chemical kits and first aid kits.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... transportation by passenger aircraft or cargo aircraft may not be included in the kits. (2) The packing group... so there will be no possibility of the mixture of contents causing dangerous evolution of heat or gas... pollutant, or is offered for transportation and transported by aircraft or vessel. Chemical kits and...

  18. Aircraft

    DOEpatents

    Hibbs, B.D.; Lissaman, P.B.S.; Morgan, W.R.; Radkey, R.L.

    1998-09-22

    This disclosure provides a solar rechargeable aircraft that is inexpensive to produce, is steerable, and can remain airborne almost indefinitely. The preferred aircraft is a span-loaded flying wing, having no fuselage or rudder. Travelling at relatively slow speeds, and having a two-hundred foot wingspan that mounts photovoltaic cells on most all of the wing`s top surface, the aircraft uses only differential thrust of its eight propellers to turn. Each of five sections of the wing has one or more engines and photovoltaic arrays, and produces its own lift independent of the other sections, to avoid loading them. Five two-sided photovoltaic arrays, in all, are mounted on the wing, and receive photovoltaic energy both incident on top of the wing, and which is incident also from below, through a bottom, transparent surface. The aircraft is capable of a top speed of about ninety miles per hour, which enables the aircraft to attain and can continuously maintain altitudes of up to sixty-five thousand feet. Regenerative fuel cells in the wing store excess electricity for use at night, such that the aircraft can sustain its elevation indefinitely. A main spar of the wing doubles as a pressure vessel that houses hydrogen and oxygen gases for use in the regenerative fuel cell. The aircraft has a wide variety of applications, which include weather monitoring and atmospheric testing, communications, surveillance, and other applications as well. 31 figs.

  19. Aircraft

    DOEpatents

    Hibbs, Bart D.; Lissaman, Peter B. S.; Morgan, Walter R.; Radkey, Robert L.

    1998-01-01

    This disclosure provides a solar rechargeable aircraft that is inexpensive to produce, is steerable, and can remain airborne almost indefinitely. The preferred aircraft is a span-loaded flying wing, having no fuselage or rudder. Travelling at relatively slow speeds, and having a two-hundred foot wingspan that mounts photovoltaic cells on most all of the wing's top surface, the aircraft uses only differential thrust of its eight propellers to turn. Each of five sections of the wing has one or more engines and photovoltaic arrays, and produces its own lift independent of the other sections, to avoid loading them. Five two-sided photovoltaic arrays, in all, are mounted on the wing, and receive photovoltaic energy both incident on top of the wing, and which is incident also from below, through a bottom, transparent surface. The aircraft is capable of a top speed of about ninety miles per hour, which enables the aircraft to attain and can continuously maintain altitudes of up to sixty-five thousand feet. Regenerative fuel cells in the wing store excess electricity for use at night, such that the aircraft can sustain its elevation indefinitely. A main spar of the wing doubles as a pressure vessel that houses hydrogen and oxygen gasses for use in the regenerative fuel cell. The aircraft has a wide variety of applications, which include weather monitoring and atmospheric testing, communications, surveillance, and other applications as well.

  20. Detection of irradiated liquor

    NASA Astrophysics Data System (ADS)

    Shengchu, Qi; Jilan, Wu; Rongyao, Yuan

    D-2,3-butanediol is formed by irradiation processes in irradiated liquors. This radiolytic product is not formed in unirradiated liquors and its presence can therefore be used to identify whether a liquor has been irradiated or not. The relation meso/dl≈1 for 2,3-butanediol and the amount present in irradiated liquors may therefore be used as an indication of the dose used in the irradiation.

  1. Slip Kits.

    ERIC Educational Resources Information Center

    Coombes, S. D.

    1979-01-01

    Discusses the process of developing the Science Lessons from Industrial Processes (SLIP) kits by 16 British science teachers. The content, applicability, and components of these kits (based upon local industries) are also included. (HM)

  2. 49 CFR 173.165 - Polyester resin kits.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 2 2012-10-01 2012-10-01 false Polyester resin kits. 173.165 Section 173.165... Polyester resin kits. (a) Except for transportation by aircraft, polyester resin kits consisting of a base.... Additionally, unless otherwise excepted in this subchapter, polyester resin kits must be packaged...

  3. Gasification of black liquor

    DOEpatents

    Kohl, Arthur L.

    1987-07-28

    A concentrated aqueous black liquor containing carbonaceous material and alkali metal sulfur compounds is treated in a gasifier vessel containing a relatively shallow molten salt pool at its bottom to form a combustible gas and a sulfide-rich melt. The gasifier vessel, which is preferably pressurized, has a black liquor drying zone at its upper part, a black liquor solids gasification zone located below the drying zone, and a molten salt sulfur reduction zone which comprises the molten salt pool. A first portion of an oxygen-containing gas is introduced into the gas space in the gasification zone immediatley above the molten salt pool. The remainder of the oxygen-containing gas is introduced into the molten salt pool in an amount sufficient to cause gasification of carbonaceous material entering the pool from the gasification zone but not sufficient to create oxidizing conditions in the pool. The total amount of the oxygen-containing gas introduced both above the pool and into the pool constitutes between 25 and 55% of the amount required for complete combustion of the black liquor feed. A combustible gas is withdrawn from an upper portion of the drying zone, and a melt in which the sulfur content is predominantly in the form of alkali metal sulfide is withdrawn from the molten salt sulfur reduction zone.

  4. Gasification of black liquor

    DOEpatents

    Kohl, A.L.

    1987-07-28

    A concentrated aqueous black liquor containing carbonaceous material and alkali metal sulfur compounds is treated in a gasifier vessel containing a relatively shallow molten salt pool at its bottom to form a combustible gas and a sulfide-rich melt. The gasifier vessel, which is preferably pressurized, has a black liquor drying zone at its upper part, a black liquor solids gasification zone located below the drying zone, and a molten salt sulfur reduction zone which comprises the molten salt pool. A first portion of an oxygen-containing gas is introduced into the gas space in the gasification zone immediately above the molten salt pool. The remainder of the oxygen-containing gas is introduced into the molten salt pool in an amount sufficient to cause gasification of carbonaceous material entering the pool from the gasification zone but not sufficient to create oxidizing conditions in the pool. The total amount of the oxygen-containing gas introduced both above the pool and into the pool constitutes between 25 and 55% of the amount required for complete combustion of the black liquor feed. A combustible gas is withdrawn from an upper portion of the drying zone, and a melt in which the sulfur content is predominantly in the form of alkali metal sulfide is withdrawn from the molten salt sulfur reduction zone. 2 figs.

  5. Pyrolysis of Large Black Liquor Droplets

    NASA Technical Reports Server (NTRS)

    Bartkus, Tadas P.; T'ien, James S.; Dietrich, Daniel L.; Wessel, Richard A.

    2007-01-01

    This paper presents the results of experiments involving the pyrolysis of large black liquor droplets in the NASA KC-135 reduced gravity aircraft. The reduced gravity environment facilitated the study of droplets up to 9 mm in diameter extending the results of previous studies to droplet sizes that are similar to those encountered in recovery boilers. Single black liquor droplets were rapidly inserted into a 923 K oven. The primary independent variables were the initial droplet diameter (0.5 mm to 9 mm), the black liquor solids content (66.12% - 72.9% by mass), and the ambient oxygen mole fraction (0.0 - 0.21). Video records of the experiments provided size and shape of the droplets as a function of time. The results show that the particle diameter at the end of the drying stage (D(sub DRY) ) increases linearly with the initial particle diameter (D(sub O)). The results further show that the ratio of the maximum swollen diameter (D(sub MAX)) to D(sub O) decreases with increasing D(sub O) for droplets with D(sub O) less than 4 mm. This ratio was independent of D(sub O) for droplets with D(sub O) greater than 4 mm. The particle is most spherical at the end of drying, and least spherical at maximum swollen size, regardless of initial sphericity and droplet size.

  6. Pyrolysis of Large Black Liquor Droplets

    NASA Technical Reports Server (NTRS)

    Bartkus, Tadas P.; Dietrich, Daniel L.; T'ien, James S.; Wessel, Richard A.

    2007-01-01

    This paper presents the results of experiments involving the pyrolysis of large black liquor droplets in the NASA KC-135 reduced gravity aircraft. The reduced gravity environment facilitated the study of droplets up to 9 mm in diameter extending the results of previous studies to droplet sizes that are similar to those encountered in recovery boilers. Single black liquor droplets were rapidly inserted into a 923 K oven. The primary independent variables were the initial droplet diameter (0.5 mm to 9 mm), the black liquor solids content (66.12% - 72.9% by mass), and the ambient oxygen mole fraction (0.0 - 0.21). Video records of the experiments provided size and shape of the droplets as a function of time. The results show that the particle diameter at the end of the drying stage (D(sub DRY)) increases linearly with the initial particle diameter (D(sub O)). The results further show that the ratio of the maximum swollen diameter (D(sub MAX)) to D(sub O) decreases with increasing D(sub O) for droplets with D(sub O) less than 4 mm. This ratio was independent of D(sub O) for droplets with D(sub O) greater than 4 mm. The particle is most spherical at the end of drying, and least spherical at maximum swollen size, regardless of initial sphericity and droplet size.

  7. 75 FR 64248 - Approval for Processing Authority Foreign-Trade Zones 73 and 74; The Belt's Corporation (Kitting...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-19

    ... given in the Federal Register (75 FR 12732, 3-17-2010) and the application has been processed pursuant... Corporation (Kitting of Liquor Gift Sets), Elkridge and Baltimore, MD Pursuant to its authority under...

  8. Scrubbing liquors for nitrogen tetroxide

    NASA Technical Reports Server (NTRS)

    Thomas, J. J.

    1978-01-01

    Once it was determined that the wet scrubbing concept was the most practical solution to the N2O4 emission problem, it became important to optimize the composition of the scrubbing liquor. Several reagents were cited in the literature as being advantageous in scrubbing NO2. Experiments were conducted on a model wet scrubber in order to verify and rank the performances of these scrubbing liquors. The most efficient scrubbing liquor found experimentally was a 10% sodium sulfite solution.

  9. Kraft black liquor delivery systems

    SciTech Connect

    Adams, T.N.; Empie, H.L.; Obuskovic, N.; Spielbauer, T.M.

    1990-02-01

    Improvement of spray nozzles for black liquor injection into kraft recovery furnaces is expected to result from obtaining a controlled, well-defined droplet size distribution. Work this year has centered on defining the capabilities of commercial black liquor nozzles currently in use. Considerations of the observed mechanism of droplet formation suggest a major revision is needed in the theory of how droplets form from these nozzles. High resolution, high sensitivity video has been shown to be superior to flash x-ray as a technique for measuring the droplet size distribution as well as the formation history. An environmentally sound spray facility capable of spraying black liquor at temperatures up to normal firing conditions is being constructed before data acquisition continues. Preliminary correlations have been developed between liquor properties, nozzle design, and droplet size. Three aspects of nozzle design have been investigated: droplet size distribution, fluid sheet thickness, and flow and pressure drop characteristics. The standard deviation about the median droplet size for black liquor is nearly the same as the for a wide variety of other fluids and nozzle types. Preliminary correlation for fluid sheet thickness on the plate of a splashplate nozzle show the strong similarities of black liquor to other fluids. The flow and pressure drop characteristic of black liquor nozzle, follow a simple two-term relationship similar to other flow devices. This means that in routine mill operation of black liquor nozzles only the fluid acceleration in the nozzle is important, viscous losses are quiet small. 21 refs., 53 figs., 10 tabs.

  10. 27 CFR 31.91 - Passenger trains, aircraft, and vessels.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Passenger trains, aircraft... Sales in Multiple Locations § 31.91 Passenger trains, aircraft, and vessels. Persons who carry on the business of a retail dealer in liquors or of a retail dealer in beer on trains, aircraft, boats, or...

  11. 27 CFR 31.91 - Passenger trains, aircraft, and vessels.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Passenger trains, aircraft... Sales in Multiple Locations § 31.91 Passenger trains, aircraft, and vessels. Persons who carry on the business of a retail dealer in liquors or of a retail dealer in beer on trains, aircraft, boats, or...

  12. Kits in Motion

    ERIC Educational Resources Information Center

    Gee, Maureen

    1975-01-01

    Discusses three kits developed by museums in British Columbia for use in rural classrooms. The science kit on marine biology consists of modules which included specimens, books, audiovisual materials and student activities. (BR)

  13. Levitation Kits Demonstrate Superconductivity.

    ERIC Educational Resources Information Center

    Worthy, Ward

    1987-01-01

    Describes the "Project 1-2-3" levitation kit used to demonstrate superconductivity. Summarizes the materials included in the kit. Discusses the effect demonstrated and gives details on how to obtain kits. Gives an overview of the documentation that is included. (CW)

  14. 49 CFR 173.161 - Chemical kits and first aid kits.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... outer package (excluding dry ice). For transportation by aircraft, no more than 1 L or 1 kg of hazardous material may be contained in one kit (excluding dry ice); (4) Each package must conform to the packaging... dioxide, solid (Dry ice), UN1845, no other hazardous materials may be packed within the same...

  15. Sunday Liquor Laws and Crime

    PubMed Central

    Heaton, Paul

    2011-01-01

    Many jurisdictions have considered relaxing Sunday alcohol sales restrictions, yet such restrictions' effects on public health remain poorly understood. This paper analyzes the effects of legalization of Sunday packaged liquor sales on crime, focusing on the phased introduction of such sales in Virginia beginning in 2004. Differences-in-differences and triple-differences estimates indicate the liberalization increased minor crime by 5% and alcohol-involved serious crime by 10%. The law change did not affect domestic crime or induce significant geographic or inter-temporal crime displacement. The costs of this additional crime are comparable to the state's revenues from increased liquor sales. PMID:22125348

  16. 21 CFR 163.111 - Chocolate liquor.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 2 2014-04-01 2014-04-01 false Chocolate liquor. 163.111 Section 163.111 Food and... CONSUMPTION CACAO PRODUCTS Requirements for Specific Standardized Cacao Products § 163.111 Chocolate liquor. (a) Description. (1) Chocolate liquor is the solid or semiplastic food prepared by finely...

  17. Laser Excited Fluorescence Studies Of Black Liquor

    NASA Astrophysics Data System (ADS)

    Horvath, J. J.; Semerjian, H. G.

    1986-10-01

    Laser excited fluorescence of black liquor was investigated as a possible monitoring technique for pulping processes. A nitrogen pumped dye laser was used to examine the fluorescence spectrum of black liquor solutions. Various excitation wavelengths were used between 290 and 403 nm. Black liquor fluorescence spectra were found to vary with both excitation wavelength and black liquor concentration. Laser excited fluorescence was found to be a sensitive technique for measurement of black liquor with good detection limits and linear response over a large dynamic range.

  18. Creation of learning kits

    NASA Technical Reports Server (NTRS)

    Stow, D. A.; Estes, J. E.; Mertz, F. C.

    1981-01-01

    A learning kit is an essential part of any remote sensing workshop, course, or in-house training program to provide the "hands-on" experience of working with remotely sensed imagery. This is the objective of laboratory and field exercises as well as the reason behind the production of imagery/map kits. The way in which these learning kits (containing conventional remotely sensed and collateral data products) are put together is described and some concerns that influence the creation of learning kits are discussed. These include budgetary constraints, number of imagery types, and number of collateral data types.

  19. Benchmarking Tool Kit.

    ERIC Educational Resources Information Center

    Canadian Health Libraries Association.

    Nine Canadian health libraries participated in a pilot test of the Benchmarking Tool Kit between January and April, 1998. Although the Tool Kit was designed specifically for health libraries, the content and approach are useful to other types of libraries as well. Used to its full potential, benchmarking can provide a common measuring stick to…

  20. Communications Survival Kit.

    ERIC Educational Resources Information Center

    Williamson, Shirley Porter; Braden, Bill

    The purpose of the Communications Survival Kit is to serve as a guide for counselors to assist in planning, developing and implementing a public relations program for the guidance department at the local school level. The kit contains practical information in three categories. First is a rationale for a public relations (PR) program, what PR is…

  1. Community Consultation Kit.

    ERIC Educational Resources Information Center

    Boulder Area Growth Study Commission, CO.

    This kit, designed for leaders and participants, provides a model for organizing and taking part in Community Consultation Groups. The kit was designed to be used in connection with community concerns about growth in Boulder, Colorado. These groups build upon a previous survey to assist the Commission in determining specific growth concerns in the…

  2. The Indonesia Kit. A Study Kit.

    ERIC Educational Resources Information Center

    Briere, Elaine; Gage, Susan

    This document is designed for Canadians interested in the South Pacific island chain nation of Indonesia. The kit includes information, photographs, and illustrations concerning Indonesia, West Papua (Irian Jaya), and East Timor. There are discussions of Indonesia's environment, its transmigration program, development refugees, and ties with…

  3. 27 CFR 19.513 - Distinctive liquor bottles.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Distinctive liquor bottles..., DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Liquor Bottle, Label, and Closure Requirements Authorized Liquor Bottles § 19.513 Distinctive liquor bottles. (a) Application. A proprietor must submit...

  4. 27 CFR 31.203 - Possession of used liquor bottles.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Possession of used liquor... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS ALCOHOL BEVERAGE DEALERS Reuse and Possession of Used Liquor Bottles § 31.203 Possession of used liquor bottles. The possession of used liquor bottles by any...

  5. Combustion properties of Kraft Black Liquors

    SciTech Connect

    Frederick, W.J. Jr.; Hupa, M. )

    1993-04-01

    In a previous study of the phenomena involved in the combustion of black liquor droplets a numerical model was developed. The model required certain black liquor specific combustion information which was then not currently available, and additional data were needed for evaluating the model. The overall objectives of the project reported here was to provide experimental data on key aspects of black liquor combustion, to interpret the data, and to put it into a form which would be useful for computational models for recovery boilers. The specific topics to be investigated were the volatiles and char carbon yields from pyrolysis of single black liquor droplets; a criterion for the onset of devolatilization and the accompanying rapid swelling; and the surface temperature of black liquor droplets during pyrolysis, combustion, and gasification. Additional information on the swelling characteristics of black liquor droplets was also obtained as part of the experiments conducted.

  6. Recycling paper-pulp waste liquors

    NASA Technical Reports Server (NTRS)

    Sarbolouki, M. N.

    1981-01-01

    Papermills in U.S. annually produce 3 million tons of sulfite waste liquor solids; other fractions of waste liquor are monomeric sugars and lignosulfonates in solution. Recovery of lignosulfonates involves precipitation and cross-linking of sulfonates to form useful solid ion-exchange resin. Contamination of sugars recovered from liquor is avoided by first converting them to ethanol, then removing ethanol by distillation.

  7. Causticizing for Black Liquor Gasifiers

    SciTech Connect

    Scott Sinquefeld; James Cantrell; Xiaoyan Zeng; Alan Ball; Jeff Empie

    2009-01-07

    The cost-benefit outlook of black liquor gasification (BLG) could be greatly improved if the smelt causticization step could be achieved in situ during the gasification step. Or, at a minimum, the increase in causticizing load associated with BLG could be mitigated. A number of chemistries have been proven successful during black liquor combustion. In this project, three in situ causticizing processes (titanate, manganate, and borate) were evaluated under conditions suitable for high temperature entrained flow BLG, and low temperature steam reforming of black liquor. The evaluation included both thermodynamic modeling and lab experimentation. Titanate and manganate were tested for complete direct causticizing (to thus eliminate the lime cycle), and borates were evaluated for partial causticizing (to mitigate the load increase associated with BLG). Criteria included high carbonate conversion, corresponding hydroxide recovery upon hydrolysis, non process element (NPE) removal, and economics. Of the six cases (three chemistries at two BLG conditions), only two were found to be industrially viable: titanates for complete causticizing during high temperature BLG, and borates for partial causticizing during high temperature BLG. These two cases were evaluated for integration into a gasification-based recovery island. The Larsen [28] BLG cost-benefit study was used as a reference case for economic forecasting (i.e. a 1500 tpd pulp mill using BLG and upgrading the lime cycle). By comparison, using the titanate direct causticizing process yielded a net present value (NPV) of $25M over the NPV of BLG with conventional lime cycle. Using the existing lime cycle plus borate autocausticizing for extra capacity yielded a NPV of $16M.

  8. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    SciTech Connect

    William L. Headrick Jr; Musa Karakus; Jun Wei

    2005-03-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in

  9. Fuel nitrogen release during black liquor pyrolysis; Part 2: Comparisons between different liquors

    SciTech Connect

    Aho, K.; Nikkanen, S. ); Hupa, M. . Chemical Engineering Dept.)

    1994-08-01

    This continuation of earlier work reports fuel nitrogen release for black liquors at two temperatures during pyrolysis of single droplets in an oxygen-free environment. Approximately half of the 20--60% fuel nitrogen released was ammonia and half was molecular nitrogen. The total amount of fixed nitrogen released during pyrolysis was almost linearly proportional to the liquor nitrogen content. The yield of fixed nitrogen for birch liquors was significantly higher than for pine liquors, and the yield for bagasse liquor was extremely high.

  10. Big Island Demonstration Project - Black Liquor

    SciTech Connect

    2006-08-01

    Black liquor is a papermaking byproduct that also serves as a fuel for pulp and paper mills. This project involves the design, construction, and operation of a black liquor gasifier that will be integrated into Georgia-Pacific's Big Island facility in Virginia, a mill that has been in operation for more than 100 years.

  11. 25 CFR 140.18 - Intoxicating liquors.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Intoxicating liquors. 140.18 Section 140.18 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR FINANCIAL ACTIVITIES LICENSED INDIAN TRADERS § 140.18 Intoxicating liquors. No trader shall use or permit to be used his premises for any unlawful conduct or purpose whatsoever. No trader shall use...

  12. Refractory for Black Liquor Gasifiers

    SciTech Connect

    William L. Headrick Jr; Alireza Rezaie

    2003-12-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the materials problems encountered during the operation of low-pressure high-temperature (LFHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in

  13. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    SciTech Connect

    William L. Headrick Jr.; Alireza Rezaie

    2003-12-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the materials problems encountered during the operation of low-pressure high-temperature (LFHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in

  14. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    SciTech Connect

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang; Alireza Rezaie

    2004-07-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in

  15. Refractory for Black Liquor Gasifiers

    SciTech Connect

    William L. Headrick; Musa Karakus; Alireza Rezaie

    2004-03-30

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in

  16. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    SciTech Connect

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang; Alireza Rezaie

    2004-10-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in

  17. Refractory for Black Liquor Gasifiers

    SciTech Connect

    Robert E. Moore; William L. Headrick; Alireza Rezaie

    2003-03-31

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the materials problems encountered during the operation of low-pressure high-temperature (LFHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in

  18. Refractory for Black Liquor Gasifiers

    SciTech Connect

    William L. Headrick Jr; Alireza Rezaie

    2003-08-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the materials problems encountered during the operation of low-pressure high-temperature (LFHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in

  19. Refractory for Black Liquor Gasifiers

    SciTech Connect

    William L. Headrick Jr; Alireza Rezaie; Xiaoting Liang; Musa Karakus; Jun Wei

    2005-12-01

    The University of Missouri-Rolla identified materials that permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project was to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study attempted to define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials were selected or developed that reacted with the gasifier environment to form protective surfaces in-situ; and

  20. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    SciTech Connect

    William L. Headrick Jr.; Alireza Rezaie

    2004-04-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the materials problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in

  1. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    SciTech Connect

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang; Jun Wei

    2005-01-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in

  2. Refractory for Black Liquor Gasifiers

    SciTech Connect

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang

    2005-10-01

    The University of Missouri-Rolla identified materials that permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project was to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study attempted to define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials were selected/developed that either react with the gasifier environment to form protective surfaces in-situ; and

  3. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    SciTech Connect

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang; Jun Wei

    2005-04-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in

  4. REFRACTORY FOR BLACK LIQUOR GASIFIERS

    SciTech Connect

    William L. Headrick Jr; Musa Karakus; Xiaoting Liang

    2005-07-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in

  5. Refractory for Black Liquor Gasifiers

    SciTech Connect

    William L. Headrick Jr; Musa Karakus; Xiaoting Laing

    2005-10-01

    The University of Missouri-Rolla will identify materials that will permit the safe, reliable and economical operation of combined cycle gasifiers by the pulp and paper industry. The primary emphasis of this project will be to resolve the material problems encountered during the operation of low-pressure high-temperature (LPHT) and low-pressure low-temperature (LPLT) gasifiers while simultaneously understanding the materials barriers to the successful demonstration of high-pressure high-temperature (HPHT) black liquor gasifiers. This study will define the chemical, thermal and physical conditions in current and proposed gasifier designs and then modify existing materials and develop new materials to successfully meet the formidable material challenges. Resolving the material challenges of black liquor gasification combined cycle technology will provide energy, environmental, and economic benefits that include higher thermal efficiencies, up to three times greater electrical output per unit of fuel, and lower emissions. In the near term, adoption of this technology will allow the pulp and paper industry greater capital effectiveness and flexibility, as gasifiers are added to increase mill capacity. In the long term, combined-cycle gasification will lessen the industry's environmental impact while increasing its potential for energy production, allowing the production of all the mill's heat and power needs along with surplus electricity being returned to the grid. An added benefit will be the potential elimination of the possibility of smelt-water explosions, which constitute an important safety concern wherever conventional Tomlinson recovery boilers are operated. Developing cost-effective materials with improved performance in gasifier environments may be the best answer to the material challenges presented by black liquor gasification. Refractory materials may be selected/developed that either react with the gasifier environment to form protective surfaces in

  6. MeshKit

    SciTech Connect

    2010-10-05

    MeshKit is an open-source library of mesh generation functionality. MeshKit has general mesh manipulation and generation functions such as Copoy, Move, Rotate and Extrude mesh. In addition, new quad mesh and embedded boundary Cartesian mesh algorithm (EB Mesh) are included. Interfaces to several public domain meshing algorithms (TetGen, netgen, triangle, Gmsh, camal) are also offered. This library interacts with mesh data mostly through iMesh including accessing the mesh in parallel. It also can interact with iGeom interface to provide geometry functionality such as importing solid model based geometries. iGeom and IMesh are implemented in the CGM and MOAB packages, respectively. For some non-existing function in iMesh such as tree-construction and ray-tracing, MeshKit also interacts with MOAB functions directly.

  7. MeshKit

    2010-10-05

    MeshKit is an open-source library of mesh generation functionality. MeshKit has general mesh manipulation and generation functions such as Copoy, Move, Rotate and Extrude mesh. In addition, new quad mesh and embedded boundary Cartesian mesh algorithm (EB Mesh) are included. Interfaces to several public domain meshing algorithms (TetGen, netgen, triangle, Gmsh, camal) are also offered. This library interacts with mesh data mostly through iMesh including accessing the mesh in parallel. It also can interact withmore » iGeom interface to provide geometry functionality such as importing solid model based geometries. iGeom and IMesh are implemented in the CGM and MOAB packages, respectively. For some non-existing function in iMesh such as tree-construction and ray-tracing, MeshKit also interacts with MOAB functions directly.« less

  8. Travel Medical Kit.

    PubMed

    Terry, Anne C; Haulman, N Jean

    2016-03-01

    "The traveler's medical kit is an essential tool for both the novice and expert traveler. It is designed to treat travel-related illness and injury and to ensure preexisting medical conditions are managed appropriately. Travelers are at increased risk for common gastrointestinal issues during travel. Respiratory illnesses make up approximately 8% of the ailments present in returned international travelers. Approximately 12% of travelers experience a travel-related skin condition. First aid treatment for minor injuries is essential to all travel medical kits. The complexity ranges from a small, simple case for the urban traveler to a larger, extensive case for wilderness travel." PMID:26900112

  9. 27 CFR 26.110 - Release of articles or liquors.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Release of articles or... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS LIQUORS AND ARTICLES FROM PUERTO RICO AND THE VIRGIN ISLANDS Taxpayment of Liquors and Articles in Puerto Rico Articles § 26.110 Release of articles or liquors....

  10. 27 CFR 26.110 - Release of articles or liquors.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Release of articles or... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS LIQUORS AND ARTICLES FROM PUERTO RICO AND THE VIRGIN ISLANDS Taxpayment of Liquors and Articles in Puerto Rico Articles § 26.110 Release of articles or liquors....

  11. 27 CFR 26.110 - Release of articles or liquors.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Release of articles or... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS LIQUORS AND ARTICLES FROM PUERTO RICO AND THE VIRGIN ISLANDS Taxpayment of Liquors and Articles in Puerto Rico Articles § 26.110 Release of articles or liquors....

  12. 27 CFR 27.208 - Liquor bottles denied entry.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Liquor bottles denied... for Liquor Bottles § 27.208 Liquor bottles denied entry. Filled liquor bottles, not conforming to the... customs custody of distilled spirits in bottles, except those coming under the provisions of §...

  13. 27 CFR 31.202 - Possession of refilled liquor bottles.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... liquor bottles. 31.202 Section 31.202 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND... Liquor Bottles § 31.202 Possession of refilled liquor bottles. No person who sells, or offers for sale, distilled spirits, or agent or employee of such person, shall: (a) Possess any liquor bottle in which...

  14. 27 CFR 26.314 - Distinctive liquor bottles.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... officer to— (1) Meet the requirements of 27 CFR part 5; (2) Be distinctive; (3) Be suitable for their... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Distinctive liquor bottles... for Liquor Bottles § 26.314 Distinctive liquor bottles. (a) Application. Liquor bottles of...

  15. 27 CFR 26.319 - Used liquor bottles.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Used liquor bottles. 26... for Liquor Bottles § 26.319 Used liquor bottles. The appropriate TTB officer may pursuant to letterhead application filed in triplicate, authorize an importer to receive liquor bottles assembled for...

  16. 27 CFR 26.318 - Liquor bottles denied entry.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Liquor bottles denied... Requirements for Liquor Bottles § 26.318 Liquor bottles denied entry. Filled liquor bottles not conforming to... release from customs custody of distilled spirits in bottles, except those coming under the provisions...

  17. 27 CFR 27.208 - Liquor bottles denied entry.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Liquor bottles denied... for Liquor Bottles § 27.208 Liquor bottles denied entry. Filled liquor bottles, not conforming to the... customs custody of distilled spirits in bottles, except those coming under the provisions of §...

  18. 27 CFR 26.319 - Used liquor bottles.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Used liquor bottles. 26... for Liquor Bottles § 26.319 Used liquor bottles. The appropriate TTB officer may pursuant to letterhead application filed in triplicate, authorize an importer to receive liquor bottles assembled for...

  19. 27 CFR 26.314 - Distinctive liquor bottles.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... officer to— (1) Meet the requirements of 27 CFR part 5; (2) Be distinctive; (3) Be suitable for their... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Distinctive liquor bottles... for Liquor Bottles § 26.314 Distinctive liquor bottles. (a) Application. Liquor bottles of...

  20. 27 CFR 26.318 - Liquor bottles denied entry.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Liquor bottles denied... Requirements for Liquor Bottles § 26.318 Liquor bottles denied entry. Filled liquor bottles not conforming to... release from customs custody of distilled spirits in bottles, except those coming under the provisions...

  1. Projectable Basic Electronics Kit.

    ERIC Educational Resources Information Center

    H'ng, John; And Others

    1982-01-01

    Outlines advantages derived from constructing and using a Projectable Basic Electronics Kit and provides: (1) list of components; (2) diagrams of 10 finished components (resistor; capacitor; diode; switch; bulb; transistor; meter; variable capacitor; coil; connecting terminal); and (3) diode and transistor activities. (JN)

  2. Theme Kits Made Easy.

    ERIC Educational Resources Information Center

    Eslinger, Leslie Silk

    Recognizing the long-lasting impact of young childrens learning through themes as well as the amount of teacher time spent in preparing for this type of teaching, this kit is designed to help teachers avoid the shortcomings of theme-based teaching, while capitalizing on the benefits of this approach. The book is presented in two sections. The…

  3. Ohio EPA Teachers Kit.

    ERIC Educational Resources Information Center

    Ohio State Environmental Protection Agency, Columbus.

    In an effort to provide teachers in Ohio with assistance in environmental education, the Ohio Environmental Protection Agency (EPA) has produced this teachers kit. It is designed to describe what the Ohio EPA is doing to protect Ohio's air, land, and water. The background information provides an historical account of some of the events that have…

  4. [Conference Time Kit.

    ERIC Educational Resources Information Center

    National School Public Relations Association, Washington, DC.

    This multimedia kit, for use with and by teachers from kindergarten through the upper elementary grades, consists of four components: 1) a filmstrip for teachers; 2) the 1970 edition of a handbook, "Conference Time for Teachers and Parents"; 3) a filmstrip for parents; 4) a supporting parent information leaflet "How To Confer Successfully with…

  5. User Authentication. SPEC Kit.

    ERIC Educational Resources Information Center

    Plum, Terry, Comp.; Bleiler, Richard, Comp.

    2001-01-01

    This SPEC (Systems and Procedures Exchange Center) Kit presents the results of a survey of Association of Research Libraries (ARL) member libraries designed to examine the systems research libraries use to authenticate and authorize the users of their online networked information resources. A total of 52 of 121 ARL member libraries responded to…

  6. Personalized Thematic Kits

    ERIC Educational Resources Information Center

    Bontrager, Sharon

    2010-01-01

    Teaching Spanish at the K-5 level is a passion of mine, and the author would like to share some of the practical applications that she finds most rewarding and effective. She has found enthusiastic response to the creation of detailed language learning kits that are rooted in storytelling, but expanded to include home-made board games,…

  7. Kaleo's Safe Walking Kit.

    ERIC Educational Resources Information Center

    Hawaii State Dept. of Education, Honolulu. Office of Instructional Services.

    This pedestrian safety kit for kindergarten through the third grade consists of 16 lessons encompassing many safety concepts, guidelines and skills that emphasize pedestrian safety rules, alertness, and responsible reaction to hazardous situations. Lessons include activities of varying difficulty for large group, small group or individual…

  8. Voter Education Training Kit.

    ERIC Educational Resources Information Center

    Multi-District Inst. for Political Education, Pitman, NJ.

    Guides and resources in this kit are prepared for a six week to two month secondary voter education course. The objectives are to prepare and motivate eligible students to register and vote in the presidential election, to participate in the presidential election campaigning, and to increase their overall knowledge concerning the presidential…

  9. Chat Reference. SPEC Kit.

    ERIC Educational Resources Information Center

    Ronan, Jana, Comp.; Turner, Carol, Comp.

    2002-01-01

    This SPEC (Systems and Procedures Exchange Center) Kit presents the results of a survey of Association of Research Libraries (ARL) member libraries designed to gather data on chat reference service. A total of 66 of 124 ARL member libraries responded to the survey. A copy of the questionnaire with tabulated results is presented. Representative…

  10. World Disarmament Kit.

    ERIC Educational Resources Information Center

    Woito, Robert, Ed.

    This kit presents a comprehensive introduction for students to arms control and disarmament issues. Included are copies of published and unpublished articles for each topic. Section I provides a self-survey to enable students to assess their own attitudes, values, and knowledge. The survey poses questions for which students select one of several…

  11. Balloons and Science Kit.

    ERIC Educational Resources Information Center

    Balloon Council, Washington, DC.

    This document provides background information on balloons including: (1) the history of balloons; (2) balloon manufacturing; (3) biodegradability; (4) the fate of latex balloons; and (5) the effect of balloons on the rainforest and sea mammals. Also included as part of this instructional kit are four fun experiments that allow students to…

  12. The ESL Starter Kit.

    ERIC Educational Resources Information Center

    Virginia Commonwealth Univ., Richmond. Virginia Adult Education and Literacy Resource Center.

    The kit is intended for teachers beginning to teach English as a Second Language (ESL). The first part offers some ideas for testing, registering, and placing students according to their needs and goals. A sample registration form, placement test, list of commercially-available tests, and sample needs assessments are included here. The second…

  13. Early Childhood Kits.

    ERIC Educational Resources Information Center

    National Center on Educational Media and Materials for the Handicapped, Columbus, OH.

    Selected from the National Instructional Materials Information System (NIMIS)--a computer based on-line interactive retrieval system on special education materials, the bibliography covers 80 kits for developing skills at the early childhood level. Entries are presented in order of NIMIS accession number and include the following information:…

  14. Supplementary Kits for Individualized Instruction.

    ERIC Educational Resources Information Center

    Hopkins, Roberta

    The purpose of the kits is to facilitate the teaching of basic science skills. The kits can be used in the regular classroom for which they were designed or as instruments for teaching of students in learning disability classes. The kits are designed in the areas of plants, animals, metric measurement, chemistry, geology, and space study. Each kit…

  15. Protein crystallography prescreen kit

    DOEpatents

    Segelke, Brent W.; Krupka, Heike I.; Rupp, Bernhard

    2007-10-02

    A kit for prescreening protein concentration for crystallization includes a multiplicity of vials, a multiplicity of pre-selected reagents, and a multiplicity of sample plates. The reagents and a corresponding multiplicity of samples of the protein in solutions of varying concentrations are placed on sample plates. The sample plates containing the reagents and samples are incubated. After incubation the sample plates are examined to determine which of the sample concentrations are too low and which the sample concentrations are too high. The sample concentrations that are optimal for protein crystallization are selected and used.

  16. Protein crystallography prescreen kit

    DOEpatents

    Segelke, Brent W.; Krupka, Heike I.; Rupp, Bernhard

    2005-07-12

    A kit for prescreening protein concentration for crystallization includes a multiplicity of vials, a multiplicity of pre-selected reagents, and a multiplicity of sample plates. The reagents and a corresponding multiplicity of samples of the protein in solutions of varying concentrations are placed on sample plates. The sample plates containing the reagents and samples are incubated. After incubation the sample plates are examined to determine which of the sample concentrations are too low and which the sample concentrations are too high. The sample concentrations that are optimal for protein crystallization are selected and used.

  17. Telescience Resource Kit

    NASA Technical Reports Server (NTRS)

    Schneider, Michelle; Lippincott, Jeff; Chubb, Steve; Whitaker, Jimmy; Rice, Jim; Gillis, Robert; Sims, Chris; Sellers, Donna; Bailey, Darrell (Technical Monitor)

    2002-01-01

    The Telescience Resource Kit (TReK) is a PC based ground control system. It can be used by a single individual or in a group environment to monitor and control spacecraft systems and payloads. Capabilities include data receipt, data processing, data storage, data management, and data transmission. Commercial-Off-The-Shelf (COTS) hardware and software have been employed to reduce development costs, operations and maintenance costs, and to effectively take advantage of new commercial products as they become available. The TReK system is currently being used to monitor and control payloads aboard the International Space Station. It is located at sites around the world.

  18. KIT — EDRN Public Portal

    Cancer.gov

    SCF-sR, also known as KIT, is the human homolog of the proto-oncogene c-kit. C-kit was first identified as the cellular homolog of the feline sarcoma viral oncogene v-kit. Human KIT is a tyrosine-protein kinase that acts as cell-surface receptor for the cytokine KITLG/SCF and plays an essential role in the regulation of cell survival and proliferation, hematopoiesis, stem cell maintenance, gametogenesis, mast cell development, migration and function, and in melanogenesis. KIT is a type 3 transmembrane receptor for MGF (mast cell growth factor, also known as stem cell factor). Mutations in this gene are associated with gastrointestinal stromal tumors, mast cell disease, acute myelogenous lukemia, and piebaldism. Multiple transcript variants encoding different isoforms have been found for this gene.

  19. Optics learning through affordable kit

    NASA Astrophysics Data System (ADS)

    P, Anusha N.; Shaji, Chitra; Sharan, Alok

    2014-10-01

    An affordable kit which helps to understand some of the optical phenomena qualitatively and quantitatively is presented in this paper. It supplements optics taught in classes. The kit consists of equipments which are available in the market at nominal cost such as laser pointer, lenses, glass plates, razor blades, coins, ball bearing etc. Experiments which come under wave optics (interference and diffraction) and ray optics (reflection and refraction) are explained using this kit.

  20. Education Payload Operation - Kit D

    NASA Technical Reports Server (NTRS)

    Keil, Matthew

    2009-01-01

    Education Payload Operation - Kit D (EPO-Kit D) includes education items that will be used to support the live International Space Station (ISS) education downlinks and Education Payload Operation (EPO) demonstrations onboard the ISS. The main objective of EPO-Kit D supports the National Aeronautics and Space Administration (NASA) goal of attracting students to study and seek careers in science, technology, engineering, and mathematics.

  1. Optics learning through affordable kit

    SciTech Connect

    P, Anusha N E-mail: chitrashaji@gmail.com Shaji, Chitra E-mail: chitrashaji@gmail.com Sharan, Alok E-mail: chitrashaji@gmail.com

    2014-10-15

    An affordable kit which helps to understand some of the optical phenomena qualitatively and quantitatively is presented in this paper. It supplements optics taught in classes. The kit consists of equipments which are available in the market at nominal cost such as laser pointer, lenses, glass plates, razor blades, coins, ball bearing etc. Experiments which come under wave optics (interference and diffraction) and ray optics (reflection and refraction) are explained using this kit.

  2. Recovering gallium from residual bayer process liquor

    NASA Astrophysics Data System (ADS)

    Afonso de Magalhães, Maria Elizabeth; Tubino, Matthieu

    1991-06-01

    Gallium is normally obtained by direct electrolysis as a by-product from Bayer process residual liquor at an aluminum processing plant. However, to permit any net accumulation of the metal, the gallium concentration must be at least about 0.3 g/l in the liquor. This article describes a continuous process of extraction with organic solvents and rhodamine-B, followed by a re-extraction step into aqueous media. The final product is a solid containing up to 18 wt.% Ga in a solid mixture of hydroxides and oxides of gallium and aluminum. This final product can then be electrolyzed to recover the gallium more efficiently.

  3. 27 CFR 26.110 - Release of articles or liquors.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Release of articles or... BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL LIQUORS AND ARTICLES FROM PUERTO RICO AND THE VIRGIN ISLANDS Taxpayment of Liquors and Articles in Puerto Rico Articles § 26.110 Release of articles or liquors....

  4. 27 CFR 26.110 - Release of articles or liquors.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Release of articles or... BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL LIQUORS AND ARTICLES FROM PUERTO RICO AND THE VIRGIN ISLANDS Taxpayment of Liquors and Articles in Puerto Rico Articles § 26.110 Release of articles or liquors....

  5. 27 CFR 26.50 - Formulas for liquors.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ....C. 5232, the formula shall include a statement to that effect. If any product contains liquors made outside of Puerto Rico, the country of origin for each such liquor shall be stated on the formula. These.... If any wine contains liquors made outside of Puerto Rico, the country of origin for each such...

  6. 27 CFR 10.603 - Liquor bottle records.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Liquor bottle records. 10... Liquor bottle records. A proprietor must maintain records of the receipt, use, and disposition of liquor bottles. (26 U.S.C. 5207)...

  7. 27 CFR 5.46 - Standard liquor bottles.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Standard liquor bottles. 5... Bottled Distilled Spirits § 5.46 Standard liquor bottles. (a) General. A standard liquor bottle shall be... container of a bottle shall not be so designed as to mislead purchasers as to the size of the bottles....

  8. 27 CFR 27.204 - Distinctive liquor bottles.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... such bottles are found by the appropriate TTB officer to— (1) Meet the requirements of 27 CFR part 5... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Distinctive liquor bottles... Bottles § 27.204 Distinctive liquor bottles. (a) Application. Liquor bottles of distinctive shape...

  9. 27 CFR 27.209 - Used liquor bottles.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Used liquor bottles. 27... Bottles § 27.209 Used liquor bottles. The appropriate TTB officer may pursuant to letterhead application filed in triplicate, authorize an importer to receive liquor bottles assembled for him as provided...

  10. 27 CFR 27.209 - Used liquor bottles.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Used liquor bottles. 27... Bottles § 27.209 Used liquor bottles. The appropriate TTB officer may pursuant to letterhead application filed in triplicate, authorize an importer to receive liquor bottles assembled for him as provided...

  11. 27 CFR 27.204 - Distinctive liquor bottles.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... such bottles are found by the appropriate TTB officer to— (1) Meet the requirements of 27 CFR part 5... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Distinctive liquor bottles... Bottles § 27.204 Distinctive liquor bottles. (a) Application. Liquor bottles of distinctive shape...

  12. 27 CFR 19.633 - Distinctive liquor bottles.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... TTB officer if the bottles are found to— (1) Meet the requirements of 27 CFR part 5; (2) Be... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Distinctive liquor bottles..., DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Liquor Bottle and Label Requirements...

  13. 27 CFR 5.46 - Standard liquor bottles.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Standard liquor bottles. 5... Bottled Distilled Spirits § 5.46 Standard liquor bottles. (a) General. A standard liquor bottle shall be... container of a bottle shall not be so designed as to mislead purchasers as to the size of the bottles....

  14. 27 CFR 31.31 - Retail dealer in liquors.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Retail dealer in liquors... Classified § 31.31 Retail dealer in liquors. (a) General. Except as otherwise provided in paragraph (b) of... other than a dealer is a retail dealer in liquors for purposes of this part. Every retail dealer...

  15. 27 CFR 31.202 - Possession of refilled liquor bottles.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Possession of refilled... TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS ALCOHOL BEVERAGE DEALERS Reuse and Possession of Used Liquor Bottles § 31.202 Possession of refilled liquor bottles. No person who sells, or offers for...

  16. 27 CFR 26.44 - Liquor dealer registration and recordkeeping.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Liquor dealer registration and recordkeeping. 26.44 Section 26.44 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS LIQUORS AND ARTICLES FROM PUERTO RICO AND THE VIRGIN ISLANDS Products Coming Into the...

  17. 27 CFR 26.210 - Liquor dealer registration and recordkeeping.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Liquor dealer registration and recordkeeping. 26.210 Section 26.210 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS LIQUORS AND ARTICLES FROM PUERTO RICO AND THE VIRGIN ISLANDS Products Coming Into the...

  18. 27 CFR 26.220 - Formulas for liquors.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Formulas for liquors. 26.220 Section 26.220 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS LIQUORS AND ARTICLES FROM PUERTO RICO AND THE VIRGIN ISLANDS Formulas for Products From the Virgin Islands §...

  19. 27 CFR 31.91 - Passenger trains, aircraft, and vessels.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Passenger trains, aircraft, and vessels. 31.91 Section 31.91 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS ALCOHOL BEVERAGE DEALERS Places Subject to Registration Sales in Multiple Locations §...

  20. International Literacy Day Tool Kit.

    ERIC Educational Resources Information Center

    2002

    This tool kit suggests various International Literacy Day activities to raise awareness of the issues of adult literacy and language learning, to connect local literacy programs with national programs, and to help achieve the National Literacy Summit goal by 2010. The kit is intended for individuals, programs, and organizations that want to call…

  1. Look Around You, Kit I.

    ERIC Educational Resources Information Center

    1971

    Developing pupils' awareness of their environment, learning to distinguish between what is pleasant and unpleasant, and examining acts of man to determine which are destructive and which are in harmony with nature are the purposes of Scholastic's Earth Corps Environmental Study Kits for grades 1-6. This kit is designed to help the child develop…

  2. Cosmic Light EDU kit

    NASA Astrophysics Data System (ADS)

    Doran, Rosa

    2015-08-01

    In 2015 we celebrate the International Year of Light, a great opportunity to promote awareness about the importance of light coming from the Cosmos and what messages it is bringing to mankind. In parallel a unique moment to attract the attention of stakeholders on the dangers of light pollution and its impact in our lives and our pursuit of more knowledge. In this presentation I want to present one of the conrnerstones of IYL2015, a partnership between the Galileo Teacher Training Program, Universe Awareness and Globe at Night, the Cosmic Light EDU kit. The aim of this project is to assemble a core set of tools and resources representing our basic knowledge pilars about the Universe and simple means to preserve our night sky.

  3. Acidification of prehydrolysis liquor and spent liquor of neutral sulfite semichemical pulping process.

    PubMed

    Fatehi, Pedram; Gao, Weijiue; Sun, Yonghui; Dashtban, Mehdi

    2016-10-01

    Acidification has been commercialized for producing kraft lignin from black liquor of kraft pulping process. This work intended to evaluate the effectiveness of acidification in extracting lignocelluloses from the spent liquor of neutral sulfite semichemical pulping (NSSC) process and from prehydrolysis liquor (PHL) of kraft-based dissolving pulp production process. The results showed that the NSSC and PHL spent liquors had some lignin-carbohydrate complexes (LCC), and that the square weighted counts of particles with a chord length of 50-150μm in the spent liquors were significantly increased as pH dropped to 1.5. Interestingly, the acidification reduced the lignosulfonate/lignin content of NSSC and PHL by 13% or 20%, while dropped their oligosugars content by 75% and 38%, respectively. On a dry basis, the precipitates had more carbon, hydrogen and a high heating value of 18-22MJ/kg, but less oxygen, than spent liquors. The precipitates of PHL could be used as fuel. PMID:27394999

  4. 14 CFR Appendix A to Part 121 - First Aid Kits and Emergency Medical Kits

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false First Aid Kits and Emergency Medical Kits A... REQUIREMENTS: DOMESTIC, FLAG, AND SUPPLEMENTAL OPERATIONS Pt. 121, App. A Appendix A to Part 121—First Aid Kits and Emergency Medical Kits Approved first-aid kits, at least one approved emergency medical kit,...

  5. Aircraft Contrails

    NASA Technical Reports Server (NTRS)

    1992-01-01

    Captured in this scene is a series of aircraft contrails in a high traffic region over the northern Gulf of Mexico (27.0N, 85.5W). Contrails are caused by the hot engine exhaust of high flying aircraft interacting with moisture in the cold upper atmosphere and are common occurrances of high flying aircraft.

  6. A Java commodity grid kit.

    SciTech Connect

    von Laszewski, G.; Foster, I.; Gawor, J.; Lane, P.; Mathematics and Computer Science

    2001-07-01

    In this paper we report on the features of the Java Commodity Grid Kit. The Java CoG Kit provides middleware for accessing Grid functionality from the Java framework. Java CoG Kit middleware is general enough to design a variety of advanced Grid applications with quite different user requirements. Access to the Grid is established via Globus protocols, allowing the Java CoG Kit to communicate also with the C Globus reference implementation. Thus, the Java CoG Kit provides Grid developers with the ability to utilize the Grid, as well as numerous additional libraries and frameworks developed by the Java community to enable network, Internet, enterprise, and peer-to peer computing. A variety of projects have successfully used the client libraries of the Java CoG Kit to access Grids driven by the C Globus software. In this paper we also report on the efforts to develop server side Java CoG Kit components. As part of this research we have implemented a prototype pure Java resource management system that enables one to run Globus jobs on platforms on which a Java virtual machine is supported, including Windows NT machines.

  7. Optimizing Medical Kits for Spaceflight

    NASA Technical Reports Server (NTRS)

    Keenan, A. B,; Foy, Millennia; Myers, G.

    2014-01-01

    The Integrated Medical Model (IMM) is a probabilistic model that estimates medical event occurrences and mission outcomes for different mission profiles. IMM simulation outcomes describing the impact of medical events on the mission may be used to optimize the allocation of resources in medical kits. Efficient allocation of medical resources, subject to certain mass and volume constraints, is crucial to ensuring the best outcomes of in-flight medical events. We implement a new approach to this medical kit optimization problem. METHODS We frame medical kit optimization as a modified knapsack problem and implement an algorithm utilizing a dynamic programming technique. Using this algorithm, optimized medical kits were generated for 3 different mission scenarios with the goal of minimizing the probability of evacuation and maximizing the Crew Health Index (CHI) for each mission subject to mass and volume constraints. Simulation outcomes using these kits were also compared to outcomes using kits optimized..RESULTS The optimized medical kits generated by the algorithm described here resulted in predicted mission outcomes more closely approached the unlimited-resource scenario for Crew Health Index (CHI) than the implementation in under all optimization priorities. Furthermore, the approach described here improves upon in reducing evacuation when the optimization priority is minimizing the probability of evacuation. CONCLUSIONS This algorithm provides an efficient, effective means to objectively allocate medical resources for spaceflight missions using the Integrated Medical Model.

  8. [KIT and KIT: from biology to clinical use].

    PubMed

    Curtit, Elsa; Mansi, Laura; Viel, Erika; Dobi, Erion; Chaigneau, Loïc; Nguyen, Thierry; Pivot, Xavier; Blay, Jean-Yves; Kalbacher, Elsa

    2012-02-01

    Scientific knowledge on gastrointestinal stromal tumors (GIST) has highly progressed over the last 10 years. The molecular bases of oncogenic transformation, KIT activating mutations, were identified in 1998 by Hirota et al. The product of KIT proto-oncogene, KIT protein, is a transmembrane receptor with tyrosine kinase activity. Tyrosine kinase inhibitors targeting these mutated activated kinases, namely imatinib and more recently sunitinib, nilotinib, masitinib or sorafenib, have deeply modified GIST prognosis. Molecular biology in GIST is now becoming a routine tool for treatment selection. In patients with advanced GIST, imatinib should be given until progression, and then, other tyrosine kinase inhibitors targeting KIT should be used. In the adjuvant setting, the optimal duration of imatinib treatment remains unknown.

  9. Bacterial and fungal diversity in the starter production process of Fen liquor, a traditional Chinese liquor.

    PubMed

    Li, Xiao-Ran; Ma, En-Bo; Yan, Liang-Zhen; Meng, Han; Du, Xiao-Wei; Quan, Zhe-Xue

    2013-08-01

    Fermented foods and beverages are important parts of human diet. Fen liquor, a Chinese liquor is a fermented beverage that uses a traditional fermentation process. Starters are the main microbial source and also provide nutrients for microorganisms during fermentation. In this study, starters of Fen liquor were produced through a complex traditional fermentation process. To investigate the community structure and the composition of microorganisms in the starter production process, bacterial 16S rRNA and fungal internal transcribed spacer (ITS) regions were sequenced using clone libraries and pyrosequencing, respectively. There was much higher diversity among the bacteria than among the fungi in the starter production process. Bacteria on the surface of the starters belonged mostly to the Lactobacillaceae family, while members of the Bacillacae family were dominant in the interior of the samples that lacked access to air and water. In the fungi population, diversity was high only in the raw material. In all other samples, nearly all of the fungal sequences were from Pichia kudriavzevii, a member of the Saccharomycetaceae family. Nearly all samples showed similar fungal community structures, indicating that there was little change in the fungal community. To the best of our knowledge, this is the first report to reveal the whole process of the starter production of Chinese traditional liquor. The findings obtained in this study provide new insights into understanding the composition of the microbial community during the traditional Chinese liquor starter production process and information about the production process control and monitoring. PMID:23990293

  10. Build an Emergency Preparedness Kit

    MedlinePlus

    ... tire traction -Red or brightly- colored cloth -NOAA weather radio For more information on building emergency kits, ... and a flashlight with extra batteries. A NOAA weather radio warns the public of severe weather and ...

  11. In Situ Causticizing for Black Liquor Gasification

    SciTech Connect

    Scott Alan Sinquefield

    2005-10-01

    Black liquor gasification offers a number of attractive incentives to replace Tomlinson boilers but it also leads to an increase in the causticizing load. Reasons for this have been described in previous reports (FY04 ERC, et.al.). The chemistries have also been covered but will be reviewed here briefly. Experimental results of the causticizing reactions with black liquor are presented here. Results of the modeling work were presented in detail in the Phase 1 report. They are included in Table 2 for comparison but will not be discussed in detail. The causticizing agents were added to black liquor in the ratios shown in Table 1, mixed, and then spray-dried. The mixture ratios (doping levels) reflect amount calculated from the stoichiometry above to achieve specified conversions shown in the table. The solids were sieved to 63-90 microns for use in the entrained flow reactors. The firing conditions are shown in Table 2. Pictures and descriptions of the reactors can be found in the Phase 1 annual report. Following gasification, the solids (char) was collected and analyzed by coulometric titration (for carbonate and total carbon), and by inductively coupled plasma emission spectroscopy (ICP) for a wide array of metals.

  12. Determining silica solubility in bayer process liquor

    NASA Astrophysics Data System (ADS)

    Müller-Steinhagen, H.

    1998-11-01

    The efficient precipitation of dissolved silica from Bayer process liquor is essential for the production of high-quality alumina and the reduction of excessive scaling in the heat exchangers in the evaporation building of Bayer processes. The accurate prediction of silica solubility in Bayer liquor is one of the key parameters in improving the design and operation of the desilication process. Previous findings, particularly with respect to the influence of temperature and concentrations of caustic soda and alumina on the solubility of silica, are inconclusive. In this article, experimental results are presented over a wide range of temperature and alumina and caustic soda concentrations. Attempts are made to utilize artificial neural networks for identifying the process variables and modeling. The radial basis function neural network architecture was used successfully to generate a nonlinear correlation for the prediction of the solubility of silica in Bayer process liquor. The resulting correlation can predict the present data and the control data of other investigators with good accuracy.

  13. Energy Management Curriculum Starter Kit

    SciTech Connect

    Turner, W.C.

    1987-02-01

    The Energy Management Curriculum Starter Kit was designed to help engineering educators develop and teach energy management courses. Montana State University and Oklahoma State University courses are embodied in the model curriculum given. The curricula offered at many other universities throughout the United States are also presented. The kit was designed specifically to train engineering students to be good energy managers. Courses at both the undergraduate and postgraduate level are presented.

  14. 27 CFR 19.638 - Disposition of stocks of liquor bottles.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... liquor bottles. 19.638 Section 19.638 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Liquor Bottle and Label Requirements Liquor Bottle Requirements § 19.638 Disposition of stocks of liquor bottles. When a...

  15. 27 CFR 70.605 - Claims relating to imported, domestic, and Virgin Islands liquors.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... imported, domestic, and Virgin Islands liquors. 70.605 Section 70.605 Alcohol, Tobacco Products and... Claims Procedures § 70.605 Claims relating to imported, domestic, and Virgin Islands liquors. (a) Claims involving taxes on domestic liquors, imported liquors, and liquors manufactured in the Virgin Islands...

  16. Aircraft Design

    NASA Technical Reports Server (NTRS)

    Bowers, Albion H. (Inventor); Uden, Edward (Inventor)

    2016-01-01

    The present invention is an aircraft wing design that creates a bell shaped span load, which results in a negative induced drag (induced thrust) on the outer portion of the wing; such a design obviates the need for rudder control of an aircraft.

  17. Solid phase microextraction field kit

    DOEpatents

    Nunes, Peter J.; Andresen, Brian D.

    2005-08-16

    A field kit for the collection, isolation and concentration of trace amounts of high explosives (HE), biological weapons (BW) and chemical weapons (CW) residues in air, soil, vegetation, swipe, and liquid samples. The field kit includes a number of Solid Phase Microextraction (SPME) fiber and syringe assemblies in a hermetically sealed transportation container or tubes which includes a sampling port, a number of extra SPME fiber and syringe assemblies, the fiber and syringe assemblies including a protective cap for the fiber, and an extractor for the protective cap, along with other items including spare parts, protective glove, and an instruction manual, all located in an airtight container.

  18. Viscoelastic properties of high solids softwood kraft black liquors

    SciTech Connect

    Zaman, A.A.; Fricke, A.L. . Dept. of Chemical Engineering)

    1995-01-01

    The linear viscoelastic functions of several softwood slash pine kraft black liquors from a two level, four variable factorially designed pulping experiment were determined for solids concentrations from 65% to 81% and temperatures from 40 to 85 C. At high solids and lower temperatures, black liquors behave like un-cross-linked polymers.The exact level of dynamic viscosity and storage modulus at any given condition is dependent upon the solids composition which will vary from liquor to liquor. The linear viscoelastic functions were described using Cross and Carreau-Yasuda models. Superposition principles developed for polymer melts and concentrated polymer solutions were applied to obtain reduced correlations for dynamic viscosity and storage modulus. The data for dynamic viscosity were shifted over the whole range of temperature, solids concentrations, and frequency, and a single curve for dynamic viscosity behavior of every liquor was obtained. The data for storage modulus did not superimpose into a single curve for the effects of solids concentration. The reduced correlations were used to estimate the viscoelasticity of the liquors near normal firing conditions and found that black liquors will not have any problem in droplet formation for concentrations up to 81% solids and temperatures above 120 C. The viscometric and linear viscoelastic functions of black liquors were compared (Cox-Merz rule), and it was shown that at sufficiently low shear rates and frequencies both shear viscosity and the magnitude of the complex viscosity approach zero shear rate viscosity.

  19. 27 CFR 31.201 - Refilling of liquor bottles.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... bottles. 31.201 Section 31.201 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Bottles § 31.201 Refilling of liquor bottles. No person who sells, or offers for sale, distilled spirits, or agent or employee of such person, shall: (a) Place in any liquor bottle any distilled...

  20. 27 CFR 31.201 - Refilling of liquor bottles.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... bottles. 31.201 Section 31.201 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Bottles § 31.201 Refilling of liquor bottles. No person who sells, or offers for sale, distilled spirits, or agent or employee of such person, shall: (a) Place in any liquor bottle any distilled...

  1. 27 CFR 31.203 - Possession of used liquor bottles.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... bottles. 31.203 Section 31.203 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Bottles § 31.203 Possession of used liquor bottles. The possession of used liquor bottles by any person... circumstances: (a) The owner or occupant of any premises on which the used bottles have been lawfully...

  2. Advancement of High Temperature Black Liquor Gasification Technology

    SciTech Connect

    2006-04-01

    In the pulp and paper industry, black liquor gasification (BLG) can enable the recovery of pulping chemicals and production of syngas from the spent liquor accumulated in the pulping process. The syngas can be converted to value-added fuels, chemicals, and electricity, helping to boost the economics of the pulp mill.

  3. 27 CFR 31.42 - Restaurants serving liquors with meals.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Restaurants serving... Part Certain Organizations, Agencies, and Persons § 31.42 Restaurants serving liquors with meals. Proprietors of restaurants and other persons who serve liquors with meals to paying customers, even if...

  4. 27 CFR 31.42 - Restaurants serving liquors with meals.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Restaurants serving... Part Certain Organizations, Agencies, and Persons § 31.42 Restaurants serving liquors with meals. Proprietors of restaurants and other persons who serve liquors with meals to paying customers, even if...

  5. 27 CFR 31.42 - Restaurants serving liquors with meals.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Restaurants serving... Part Certain Organizations, Agencies, and Persons § 31.42 Restaurants serving liquors with meals. Proprietors of restaurants and other persons who serve liquors with meals to paying customers, even if...

  6. 27 CFR 31.42 - Restaurants serving liquors with meals.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Restaurants serving... Part Certain Organizations, Agencies, and Persons § 31.42 Restaurants serving liquors with meals. Proprietors of restaurants and other persons who serve liquors with meals to paying customers, even if...

  7. 27 CFR 31.42 - Restaurants serving liquors with meals.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Restaurants serving... Part Certain Organizations, Agencies, and Persons § 31.42 Restaurants serving liquors with meals. Proprietors of restaurants and other persons who serve liquors with meals to paying customers, even if...

  8. 27 CFR 31.32 - Wholesale dealer in liquors.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Wholesale dealer in liquors. 31.32 Section 31.32 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS ALCOHOL BEVERAGE DEALERS Activities Subject to This Part Dealers Classified § 31.32 Wholesale dealer in...

  9. Liquor Activity Reduction (LAR) Programme - 12397

    SciTech Connect

    Pether, Colin; Carrol, Phil; Birkett, Eddie; Kibble, Matthew

    2012-07-01

    Waste material from the reprocessing of irradiated fuel has been stored under water for several decades leading to the water becoming highly radioactive. As a critical enabler to the decommissioning strategy for the Sellafield site, the Liquor Activity Reduction (LAR) programme has been established to provide a processing route for this highly radioactive liquor. This paper reviews the progress that has been made since the start of routine LAR transfer cycles (July 2010) and follows on from the earlier paper presented at WM2011. The paper focuses on the learning from the first full year of routine LAR transfer cycles and the application of this learning to the wider strategies for the treatment of further radioactive liquid effluents on the Sellafield site. During this period over 100,000 Curies of radioactivity has been safely removed and treated. The past year has witnessed the very successful introduction of the LAR programme. This has lead to hazard reduction at MSSS and demonstration that the SIXEP facility can meet the significantly increased challenge that the LAR programme represents. Part of the success has been the ability to predict and deliver a realistic production schedule with the availability of the MSSS, EDT and SIXEP facilities being central to this. Most importantly, the LAR programme has been successful in bringing together key stakeholders to deliver this work while integrating with the existing, day to day, demands of the Sellafield site. (authors)

  10. Characteristics of Gouda cheese supplemented with fruit liquors.

    PubMed

    Choi, Hee Young; Yang, Chul Ju; Choi, Kap Seong; Bae, Inhyu

    2015-01-01

    This study was conducted in order to evaluate the quality characteristics of Gouda cheeses supplemented with fruit liquor (Prunusmume or Cornus officinalis). Fruit liquor was supplemented to Gouda cheeses during preparation. Changes in chemical composition, lactic acid bacterial population, pH, water-soluble nitrogen, sensory characteristics, and proteolysis were monitored in the prepared ripened cheese. The electrophoresis patterns of cheese proteins, fruit liquor functional component concentrations, and the flavonoid content of the cheeses were also determined. The addition of fruit liquor did not affect (p> 0.05) the appearance or sensory characteristics of the cheeses. Higher amounts of crude ash, mineral, and flavonoids (p< 0.05) were observed in the liquor supplemented cheese than in the control cheese. Findings from this study suggest that wine supplemented Gouda could provide additional nutrients while maintaining flavor and quality.

  11. User Surveys. SPEC Kit 148.

    ERIC Educational Resources Information Center

    Engelbrecht, Pamela Noyes

    Based on responses to a survey of Association of Research Libraries (ARL) members in March 1988, this Systems and Procedures Exchange Center (SPEC) flyer and kit are designed to assist administrators of large academic libraries in the selection of useful methods of conducting user surveys for particular library concerns. The flyer provides a brief…

  12. Active Parenting Now: Program Kit.

    ERIC Educational Resources Information Center

    Popkin, Michael H.

    Based largely on the theories of Alfred Adler and Rudolf Dreikurs, this parent education curriculum is a video-based interactive learning experience that teaches a comprehensive model of parenting to parents of children ages 5 to 12 years. The kit provides parents with the skills needed to help their children develop courage, responsibility, and…

  13. Evaluation of America's Career Kit.

    ERIC Educational Resources Information Center

    Office of Inspector General (DOL), Washington, DC.

    The Employment and Training Administration's (ETA's) development and implementation of America's Career Kit (ACK), which is an online career development resource for individuals needing job search assistance, career guidance, salary data, and training and educational resources, was evaluated. The evaluation was designed to determine whether ACK…

  14. No-Fuss Kindi Kits.

    ERIC Educational Resources Information Center

    Klawitter, Pamela

    1981-01-01

    Presents instructions for making six learning kits which kindergarteners can use independently to review such fundamental skills as matching or recognizing letters, numbers, shapes, and colors, as well as to explore such topics as community helpers, the senses, nutrition, and animals. (Author/SJL)

  15. Higher Education Salary Evaluation Kit.

    ERIC Educational Resources Information Center

    Scott, Elizabeth L.

    The kit is the result of a study undertaken to provide a method for flagging women and minority faculty members whose salaries appear to be low compared to the salaries of white males in the same faculty who have the same attributes and experience. The recommended method also provides an estimate of what the woman's or minority individual's salary…

  16. Architectural Environment: A Resource Kit.

    ERIC Educational Resources Information Center

    J.B. Speed Art Museum, Louisville, KY.

    There are many ways to approach the investigation of architecture. One can look at structural form, climate and topography, the aesthetics of style and decoration, building function, historical factors, cultural meanings, or technology and techniques associated with construction. This resource kit touches upon a few of these approaches, ranging…

  17. [Indonesian Information Kit No. 1036.

    ERIC Educational Resources Information Center

    United Nations Children's Fund, New York, NY. United States Committee.

    The goals of this United Nations Children's Fund (UNICEF) kit are to present information about Indonesia, its problems and its needs and to describe how UNICEF helps improve children's lives. The materials consisting of a pamphlet, a booklet, an information sheet and a wall chart, are designed to be used in elementary or secondary school…

  18. Croatian Ethnic Heritage Studies Kit.

    ERIC Educational Resources Information Center

    Duquesne Univ., Pittsburgh, PA.

    The audiovisual kit is designed to help fourth, fifth, and sixth grade students explore the cultural heritage of Croatians and trace past folklore to modern life styles of Croatian immigrants in America. Its multimedia format, which includes two cassette tapes, four filmstrips, two phonograph records, a miniature musical instrument, and seven…

  19. Johnny Horizon Environmental Test Kit.

    ERIC Educational Resources Information Center

    Bentley, Richard; Bentley, William

    Derived from tests presently used by state and federal agencies involved with pollution detection, this Environmental Test Kit contains materials and instructions for ten experiments. Each experiment is designed to test a different aspect of air and water, to find out whether or not the air and water in the tester's immediate area has been…

  20. Cubic Unit Cell Construction Kit.

    ERIC Educational Resources Information Center

    Mattson, Bruce

    2000-01-01

    Presents instructions for building a simple interactive unit-cell construction kit that allows for the construction of simple, body-centered, and face-centered cubic lattices. The lit is built from inexpensive and readily available materials and can be built in any number of sizes. (WRM)

  1. Work and Family Resource Kit.

    ERIC Educational Resources Information Center

    Women's Bureau (DOL), Washington, DC.

    This kit is designed to help employers understand the range of family needs emerging in the workplace and the numerous options for a company response. An introduction discusses the need for child care services, dependent care problems, and how employers respond and benefit. Sections address the following: selecting the right option in relation to…

  2. Sharing the Earth, Kit II.

    ERIC Educational Resources Information Center

    1971

    Introducing the pupil to the science of ecology is the purpose of Scholastic's Earth Corps Ecology/Conservation Study Kits for grades 3-6. Simple terms are used to show how all living things are inter-related to their environment, to demonstrate the intricate and delicate balance of nature, and to point out how man's interference with nature's…

  3. Natural Gas Energy Educational Kit.

    ERIC Educational Resources Information Center

    American Gas Association, Arlington, VA. Educational Services.

    Prepared by energy experts and educators to introduce middle school and high school students to natural gas and its role in our society, this kit is designed to be incorporated into existing science and social studies curricula. The materials and activities focus on the origin, discovery, production, delivery, and use of natural gas. The role of…

  4. Care Bears Environmental Awareness Kit.

    ERIC Educational Resources Information Center

    American Greetings Corp., Cleveland, OH.

    Studies show that the three most frequently cited sources of environmental information are family, school, and the media. This kit provides parents with an opportunity to increase a child's environmental awareness through activities which focus on the environment in a way children ages four to nine can understand. A workbook uses the popular Care…

  5. Basic Teaching Kit on Consumer Advertising.

    ERIC Educational Resources Information Center

    Proctor and Gamble Co., Cincinnati, OH.

    This advertising kit was developed by Procter and Gamble in response to requests from teachers and consumer educators who asked for materials from business about business. The kit is not intended to cover the entire field of advertising. Rather, it centers on advertising as it is known and practiced by Procter and Gamble. The purpose of the kit is…

  6. 21 CFR 876.5210 - Enema kit.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Enema kit. 876.5210 Section 876.5210 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES GASTROENTEROLOGY-UROLOGY DEVICES Therapeutic Devices § 876.5210 Enema kit. (a) Identification. An enema kit is...

  7. 21 CFR 876.5210 - Enema kit.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Enema kit. 876.5210 Section 876.5210 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES GASTROENTEROLOGY-UROLOGY DEVICES Therapeutic Devices § 876.5210 Enema kit. (a) Identification. An enema kit is...

  8. 21 CFR 876.5210 - Enema kit.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Enema kit. 876.5210 Section 876.5210 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES GASTROENTEROLOGY-UROLOGY DEVICES Therapeutic Devices § 876.5210 Enema kit. (a) Identification. An enema kit is...

  9. 21 CFR 876.5210 - Enema kit.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Enema kit. 876.5210 Section 876.5210 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES GASTROENTEROLOGY-UROLOGY DEVICES Therapeutic Devices § 876.5210 Enema kit. (a) Identification. An enema kit is...

  10. 27 CFR 19.634 - Receipt and storage of liquor bottles.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... CFR 31.263. Liquor bottles, including those of less than 200 ml capacity, shall be stored in a safe... liquor bottles. 19.634 Section 19.634 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Liquor Bottle and...

  11. 27 CFR 19.639 - Use and resale of liquor bottles.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... bottles. 19.639 Section 19.639 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Liquor Bottle and Label Requirements Liquor Bottle Requirements § 19.639 Use and resale of liquor bottles. No proprietor shall use any...

  12. 75 FR 44011 - Liquor Ordinance of the Wichita and Affiliated Tribes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-27

    ... ordinances and resolutions for the Tribe. The sale of Liquor and Low-Point Beer, subject to the terms and... of Liquor and Low-Point Beer within the Tribal Lands. Now, Therefore, to permit the sale of Liquor... regulate and to control the possession and sale of Liquor and Low-Point Beer to and within the...

  13. The FOT tool kit concept

    NASA Technical Reports Server (NTRS)

    Fatig, Michael

    1993-01-01

    Flight operations and the preparation for it has become increasingly complex as mission complexities increase. Further, the mission model dictates that a significant increase in flight operations activities is upon us. Finally, there is a need for process improvement and economy in the operations arena. It is therefore time that we recognize flight operations as a complex process requiring a defined, structured, and life cycle approach vitally linked to space segment, ground segment, and science operations processes. With this recognition, an FOT Tool Kit consisting of six major components designed to provide tools to guide flight operations activities throughout the mission life cycle was developed. The major components of the FOT Tool Kit and the concepts behind the flight operations life cycle process as developed at NASA's GSFC for GSFC-based missions are addressed. The Tool Kit is therefore intended to increase productivity, quality, cost, and schedule performance of the flight operations tasks through the use of documented, structured methodologies; knowledge of past lessons learned and upcoming new technology; and through reuse and sharing of key products and special application programs made possible through the development of standardized key products and special program directories.

  14. Proceedings of the black liquor research program review fourth meeting held July 28--30, 1987

    SciTech Connect

    Emerson, D. B.; Whitworth, B. A.

    1987-10-01

    Research programs, presented at the black liquor review meeting are described. Research topics include the following: Cooperative Program in Kraft Recovery; Black Liquor Physical Properties; Viscosity of Strong Black Liquor; Ultrafiltration of Kraft Black Liquor; Molecular Weight Distribution of Kraft Lignin; Black Liquor Droplet Formation Project; Fundamental Studies of Black Liquor Combustion; Black Liquor Combustion Sensors; Flash X-ray Imagining of Black Liquor Sprays; Laser Induced Fluorescence For Process Control In The Pulp and Paper Industry; Recovery Boiler Optimization; Black Liquor Gasification and Use of the Products in Combined-Cycle Cogeneration; Black Liquor Steam Plasma Automization; The B and W Pyrosonic 2000R System; Monsteras Boiler Control System; and Cooperative Program Project Reviews. Individual projects are processed separately for the data bases.

  15. Effects of solids content, settling temperature, and liquor source on tall oil solubilities

    SciTech Connect

    Rousseau, R.W.; Kassebi, A.; Zinkel, D.F.

    1984-01-01

    Tall oil soap solubility in black liquors obtained from cooking pine and sweet gum, and in mixture of these liquors, was studied. As expected, solids content had a significant effect on the amount of soap remaining in settled liquors obtained from pine. Concentrating these liquors to about 30% solids reduced the soap concentration to approximately 0.8% of solids. Increasing the temperature at which the liquors were settled also increased residual tall oil soap content. Although mass balance calculations on mixtures of black liquors obtained from pine and gum show that the percentage recovery (solids basis) varies little with the inclusion of 12 to 50% hardwood black liquor, absolute recovery is increased with increased proportions of hardwood liquor. This is the result of decreased soap solubility with increased proportions of hardwood liquor. No discernable effect was observed on the proportion and composition of the acids and neutrals of the dissolved tall oil with respect to the solids content of the liquors.

  16. Novel maqui liquor using traditional pacharán processing.

    PubMed

    Gironés-Vilaplana, Amadeo; Calín-Sánchez, Angel; Moreno, Diego A; Carbonell-Barrachina, Angel A; García-Viguera, Cristina

    2015-04-15

    Pacharán is an aniseed liquor-based beverage made with sloe berry (Prunus spinosa L.), that has been historically produced in Navarra (Northern Spain). On the other hand, Chilean native maqui berry (Aristotelia chilensis) now under increasing study because of its potential health benefits, is not widely known. The aim of this work was to design a new aniseed liquor-based beverage with maqui berry (MBL), characterising its bioactive and volatile composition, antioxidant capacity, sensory quality, and compare it to traditional pacharán (SBP). The results showed that MBL had attractive colour, exhibited higher anthocyanin content and retention during maceration, higher antioxidant capacity, presented similar aroma profile and showed optimal sensory characteristics. Therefore, MBL can be an acceptable new liquor, with better quality characteristics and higher anthocyanin content and retention than pacharán, as well as with great scores in sensory analysis and consumer acceptance, offering a new and tasty beverage for future liquor manufacturing.

  17. Demonstration of Black Liquor Gasification at Big Island

    SciTech Connect

    Robert DeCarrera

    2007-04-14

    This Final Technical Report provides an account of the project for the demonstration of Black Liquor Gasification at Georgia-Pacific LLC's Big Island, VA facility. This report covers the period from May 5, 2000 through November 30, 2006.

  18. Determination of the microbial origin of geosmin in Chinese liquor.

    PubMed

    Du, Hai; Xu, Yan

    2012-03-01

    Geosmin is the major cause of the common earthy off-flavor in light-aroma type Chinese liquor and, thus, highly detrimental to the aromatic quality. To find out its origin, the evolving process of geosmin in light-aroma type liquor making was monitored, and microbial analysis of Daqu containing geosmin was carried out. The results showed that geosmin appeared in all the fermented sorghums at different fermentation periods. About 57% geosmin in the fermented sorghums was distilled into liquor. During the distillation process, the peak of geosmin concentration appeared when alcohol content was 50-60% vol. More importantly, high geosmin content was observed during the Daqu-making process. Furthermore, five Streptomyces strains were isolated from different types of Daqu used for the fermentation of light-aroma type liquor. All of them produced only geosmin as the main volatile metabolite but no 2-methylisoborneol (2-MIB). It appears that microorganisms developing in Daqu are responsible for the presence of geosmin in liquor. Because of the relatively low detection threshold estimated at 110 ng/L in 46 vol % hydroalcoholic solution, the presence of geosmin in Daqu may pose a risk for Chinese liquor producers.

  19. Proceedings of the black liquor research program review fifth meeting

    SciTech Connect

    Not Available

    1988-09-01

    On June 14--17, 1988 the participants and invited guests of the Cooperative Program in Kraft Recovery gathered in Charleston, South Carolina, to review progress on four major black liquor research programs being executed at the Institute of Paper Chemistry, the University of Maine, the National Bureau of Standards, and the University of Florida. These programs include: (1) Black Liquor Properties; (2) Black Liquor Droplet Formation; (3) Black Liquor Nozzle Evaluation; and (4) Black Liquor Combustion. In addition to the objectives of previous meetings, this meeting made a direct attempt to gather ideas on how to improve our ability to move from new technology concepts to commercial implementation. Also attached is the agenda for the Charleston meeting. The first two days were involved with updates and reviews of the four major black liquor programs. A half day was spent discussing pathways to implementation and developing thoughts on what industry, DOE and academia could do to facilitate commercial implementation of the research results. This publication is a summary of the presentations made in Charleston and the industry responses to the research work. Readers are cautioned that the contents are in-progress updates on the status of the research and do not represent referred technical papers. Any questions regarding the content should be referred to the principal investigators of the project.

  20. Aircraft cybernetics

    NASA Technical Reports Server (NTRS)

    1977-01-01

    The use of computers for aircraft control, flight simulation, and inertial navigation is explored. The man-machine relation problem in aviation is addressed. Simple and self-adapting autopilots are described and the assets and liabilities of digital navigation techniques are assessed.

  1. Vanillin: Synthetic Flavoring from Spent Sulfite Liquor

    NASA Astrophysics Data System (ADS)

    Hocking, Martin B.

    1997-09-01

    Separation of the lignin component of wood from the cellulose presents an opportunity to access various interesting products from the lignin fragments. The lignin represents availability of a sizable renewable resource. Vanillin, or 3-methoxy-4-hydroxybenzaldehyde, is one of a series of related substituted aromatic flavor constituents, and represents one of the potentially profitable possibilities. Vanillin production from the lignin-containing waste liquor obtained from acid sulfite pulping of wood began in North America in the mid 1930's. By 1981 one plant at Thorold, Ontario produced 60% of the contemporary world supply of vanillin. The process also simultaneously decreased the organic loading of the aqueous waste streams of the pulping process. Today, however, whilst vanillin production from lignin is still practiced in Norway and a few other areas, all North American facilities using this process have closed, primarily for environmental reasons. New North American vanillin plants use petrochemical raw materials. An innovation is needed to help overcome the environmental problems of this process before vanillin production from lignin is likely to resume here. Current interest in the promotion of chemicals production from renewable raw materials reinforces the incentive to do this.

  2. Aflatoxin plate kit. Performance Tested Method 081003.

    PubMed

    Trombley, Arthur; Fan, Titan; LaBudde, Robert

    2011-01-01

    The level of total aflatoxin contamination was analyzed in naturally contaminated and spiked samples of corn and peanut using the Aflatoxin Plate Kit. This kit is an enzyme-linked immunosorbent assay (ELISA) suitable for rapid testing of grains and peanuts. The assay was evaluated for ruggedness and linearity of the standard curve. The test kit results were then statistically evaluated for accuracy, precision, and correlation to a validated HPLC method (AOAC 994.08). The results were verified by an independent laboratory.

  3. 49 CFR 173.161 - Chemical kits and first aid kits.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... liquid hazardous materials contained in the kits. The contents must be separated, placed, or packed, and... materials within the kits must not contain more than 250 ml for liquids or 250 g for solids per receptacle... the following requirements: (1) The kits may only contain hazardous materials for which...

  4. Standards for Excellence in Education. [Multimedia Kit].

    ERIC Educational Resources Information Center

    Council for Basic Education, Washington, DC.

    This multimedia kit contains information on academic standards and includes supplementary materials. The kit includes a 286-page book that presents condensed, edited, and commonly formatted versions of national standards in the arts, civics, foreign languages, geography, history, and science. Mathematics and English-language arts standards have…

  5. Kid's PACK: Population Awareness Campaign Kit.

    ERIC Educational Resources Information Center

    Zero Population Growth, Inc., Washington, DC.

    This fun and educational kit is designed specifically for elementary students. The "Kid's PACK" (Population Awareness Campaign Kit) entertains and informs children on the environment and human population growth through stories, games, and concrete ideas for making a difference. In three booklets, the "Kid's PACK" offers elementary students…

  6. Anatomy of a Minicourse. Audiovisual Kit.

    ERIC Educational Resources Information Center

    Meyer, Rex

    This kit explains the use of minicourses at Macquarie University in New South Wales, Australia, which were designed for the inservice training of teachers. The kit contains the script of the audio commentary, a cassette tape, color slides, and a booklet entitled "Anatomy of the Minicourse." The tape briefly describes the minicourses in general and…

  7. Building Use Policies. SPEC Kit 144.

    ERIC Educational Resources Information Center

    Coyle, Patrick

    This Systems and Procedures Exchange Center (SPEC) flyer/kit addresses some of the needs of Association of Research Libraries (ARL) members regarding library building use and the aesthetics and well-being of the materials and people in the building. The kit draws upon documents gathered as part of a 1986 Quick-SPEC survey that dealt with food and…

  8. Features of the Java commodity grid kit.

    SciTech Connect

    von Laszewski, G.; Gawor, J.; Lane, P.; Rehn, N.; Russell, M.; Mathematics and Computer Science

    2002-11-01

    In this paper we report on the features of the Java Commodity Grid Kit (Java CoG Kit). The Java CoG Kit provides middleware for accessing Grid functionality from the Java framework. Java CoG Kit middleware is general enough to design a variety of advanced Grid applications with quite different user requirements. Access to the Grid is established via Globus Toolkit protocols, allowing the Java CoG Kit to also communicate with the services distributed as part of the C Globus Toolkit reference implementation. Thus, the Java CoG Kit provides Grid developers with the ability to utilize the Grid, as well as numerous additional libraries and frameworks developed by the Java community to enable network, Internet, enterprise and peer-to-peer computing. A variety of projects have successfully used the client libraries of the Java CoG Kit to access Grids driven by the C Globus Toolkit software. In this paper we also report on the efforts to develop serverside Java CoG Kit components. As part of this research we have implemented a prototype pure Java resource management system that enables one to run Grid jobs on platforms on which a Java virtual machine is supported, including Windows NT machines.

  9. Culture Kits for the Elementary Classroom.

    ERIC Educational Resources Information Center

    Hickey, M. Gail

    1997-01-01

    Outlines an instructional unit where students construct culture kits illustrating a specific culture. Culture kits are constructed out of realia and other material including maps, travel brochures, photographs, newspapers, souvenirs, and other items. Discusses collecting these items and possible multicultural applications. (MJP)

  10. The Project Manager's Tool Kit

    NASA Technical Reports Server (NTRS)

    Cameron, W. Scott

    2003-01-01

    Project managers are rarely described as being funny. Moreover, a good sense of humor rarely seems to be one of the deciding factors in choosing someone to be a project manager, or something that pops up as a major discussion point at an annual performance review. Perhaps this is because people think you aren't serious about your work if you laugh. I disagree with this assessment, but that's not really my point. As I talk to people either pursuing a career in project management, or broadening their assignment to include project management, I encourage them to consider what tools they need to be successful. I suggest that they consider any strength they have to be part of their Project Management (PM) Tool Kit, and being funny could be one of the tools they need.

  11. Comparison of Ultrasound Cephalometry, Radiology, and Liquor Studies in Patients with Unknown Confinement Dates*

    PubMed Central

    Underhill, Rosemary A.; Beazley, John M.; Campbell, Stuart

    1971-01-01

    The accuracy of predicting fetal maturity by ultrasound cephalometry, radiology, and liquor studies in patients with unknown confinement dates has been compared. The best prediction was given by ultrasound cephalometry. Liquor studies were least helpful. PMID:4106479

  12. Chromatic signatures of broadband optical spectra for liquor discrimination

    NASA Astrophysics Data System (ADS)

    Jones, G. R.; Deakin, A. G.; Spencer, J. W.

    2009-02-01

    Methods based upon chromatic analysis are described for quantifying broadband optical absorption spectra in discriminating between different types of liquors. The absorption spectra are quantified by three chromaticity coordinates, which can be represented by two points, one on each of two chromatic diagrams. Various types of liquors may then be distinguished on such chromatic maps and groups of similar samples conveniently identified. Examples of the deployment of the approach are given for distinguishing between and classifying various types, brands and mixtures of alcoholic beverages and for identifying an authentic brand. The method provides a high level of traceability and is not restricted to a particular type of optical spectrum.

  13. Educating with Aircraft Models

    ERIC Educational Resources Information Center

    Steele, Hobie

    1976-01-01

    Described is utilization of aircraft models, model aircraft clubs, and model aircraft magazines to promote student interest in aerospace education. The addresses for clubs and magazines are included. (SL)

  14. 100G Deployment@(DE-KIT)

    NASA Astrophysics Data System (ADS)

    Hoeft, Bruno; Petzold, Andreas

    2015-12-01

    The Steinbuch Centre for Computing (SCC) at Karlsruhe Institute of Technology (KIT) has been involved fairly early in 100GE network technology. Initiated by DFN1 (the German NREN), a first 100GE wide area network testbed over a distance of approx. 450 km was deployed between the national research organizations KIT and FZ-Jülich in 2010. Three years later in 2013. KIT joined the Caltech SuperComputing 2013 (SC132) 100GE "show floor" initiative using the transatlantic ANA-100GE link to transfer LHC data from a storage at DE-KIT (GridKa) in Europe to hard disks at the show floor of SC13 in Denver (USA). The network infrastructure of KIT as well as of the German Tier-1 installation DE-KIT (GridKa). however. is still based on 10Gbps. As highlighted in the contribution "Status and Trends in Networking at LHC Tier1 Facilities" to CHEP 2012. proactive investment is required at the Tier-1 sites. Bandwidth requirements will grow beyond current capacity and the required upgrades are expected in 2015. In close cooperation with DFN. KIT drives the upgrade from 10GE to 100GE. The process is divided into several phases. due to upgrade costs and differing requirements in different parts of the network infrastructure. The requirements of the different phases as well as the planned topology will be described. Some of the obstacles we discovered during the deployment will be discussed and solutions or workarounds presented.

  15. Advancement of High Temperature Black Liquor Gasification Technology

    SciTech Connect

    Craig Brown; Ingvar Landalv; Ragnar Stare; Jerry Yuan; Nikolai DeMartini; Nasser Ashgriz

    2008-03-31

    Weyerhaeuser operates the world's only commercial high-temperature black liquor gasifier at its pulp mill in New Bern, NC. The unit was started-up in December 1996 and currently processes about 15% of the mill's black liquor. Weyerhaeuser, Chemrec AB (the gasifier technology developer), and the U.S. Department of Energy recognized that the long-term, continuous operation of the New Bern gasifier offered a unique opportunity to advance the state of high temperature black liquor gasification toward the commercial-scale pressurized O2-blown gasification technology needed as a foundation for the Forest Products Bio-Refinery of the future. Weyerhaeuser along with its subcontracting partners submitted a proposal in response to the 2004 joint USDOE and USDA solicitation - 'Biomass Research and Development Initiative'. The Weyerhaeuser project 'Advancement of High Temperature Black Liquor Gasification' was awarded USDOE Cooperative Agreement DE-FC26-04NT42259 in November 2004. The overall goal of the DOE sponsored project was to utilize the Chemrec{trademark} black liquor gasification facility at New Bern as a test bed for advancing the development status of molten phase black liquor gasification. In particular, project tasks were directed at improvements to process performance and reliability. The effort featured the development and validation of advanced CFD modeling tools and the application of these tools to direct burner technology modifications. The project also focused on gaining a fundamental understanding and developing practical solutions to address condensate and green liquor scaling issues, and process integration issues related to gasifier dregs and product gas scrubbing. The Project was conducted in two phases with a review point between the phases. Weyerhaeuser pulled together a team of collaborators to undertake these tasks. Chemrec AB, the technology supplier, was intimately involved in most tasks, and focused primarily on the design, specification and

  16. 77 FR 39731 - Swinomish Indian Tribal Community-Title 15, Chapter 4: Liquor Legalization, Regulation and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-05

    ... Bureau of Indian Affairs Swinomish Indian Tribal Community--Title 15, Chapter 4: Liquor Legalization... publishes Title 15, Chapter 4: Liquor Legalization, Regulation and License Code for the Swinomish Indian... adopted Ordinance No. 296, Enacting Swinomish Tribal Code Title 15, Chapter 4: Liquor...

  17. 27 CFR 31.61 - Single sale of liquors or warehouse receipts.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Single sale of liquors or warehouse receipts. 31.61 Section 31.61 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS ALCOHOL BEVERAGE DEALERS Exemptions and Exceptions Persons Who Are Not Dealers in Liquors...

  18. Combination therapy for KIT-mutant mast cells: targeting constitutive NFAT and KIT activity.

    PubMed

    Macleod, Alison C; Klug, Lillian R; Patterson, Janice; Griffith, Diana J; Beadling, Carol; Town, Ajia; Heinrich, Michael C

    2014-12-01

    Resistant KIT mutations have hindered the development of KIT kinase inhibitors for treatment of patients with systemic mastocytosis. The goal of this research was to characterize the synergistic effects of a novel combination therapy involving inhibition of KIT and calcineurin phosphatase, a nuclear factor of activated T cells (NFAT) regulator, using a panel of KIT-mutant mast cell lines. The effects of monotherapy or combination therapy on the cellular viability/survival of KIT-mutant mast cells were evaluated. In addition, NFAT-dependent transcriptional activity was monitored in a representative cell line to evaluate the mechanisms responsible for the efficacy of combination therapy. Finally, shRNA was used to stably knockdown calcineurin expression to confirm the role of calcineurin in the observed synergy. The combination of a KIT inhibitor and a calcineurin phosphatase inhibitor (CNPI) synergized to reduce cell viability and induce apoptosis in six distinct KIT-mutant mast cell lines. Both KIT inhibitors and CNPIs were found to decrease NFAT-dependent transcriptional activity. NFAT-specific inhibitors induced similar synergistic apoptosis induction as CNPIs when combined with a KIT inhibitor. Notably, NFAT was constitutively active in each KIT-mutant cell line tested. Knockdown of calcineurin subunit PPP3R1 sensitized cells to KIT inhibition and increased NFAT phosphorylation and cytoplasmic localization. Constitutive activation of NFAT appears to represent a novel and targetable characteristic of KIT-mutant mast cell disease. Our studies suggest that combining KIT inhibition with NFAT inhibition might represent a new treatment strategy for mast cell disease.

  19. Telescience Resource Kit Software Lifecycle

    NASA Technical Reports Server (NTRS)

    Griner, Carolyn S.; Schneider, Michelle

    1998-01-01

    The challenge of a global operations capability led to the Telescience Resource Kit (TReK) project, an in-house software development project of the Mission Operations Laboratory (MOL) at NASA's Marshall Space Flight Center (MSFC). The TReK system is being developed as an inexpensive comprehensive personal computer- (PC-) based ground support system that can be used by payload users from their home sites to interact with their payloads on board the International Space Station (ISS). The TReK project is currently using a combination of the spiral lifecycle model and the incremental lifecycle model. As with any software development project, there are four activities that can be very time consuming: Software design and development, project documentation, testing, and umbrella activities, such as quality assurance and configuration management. In order to produce a quality product, it is critical that each of these activities receive the appropriate amount of attention. For TReK, the challenge was to lay out a lifecycle and project plan that provides full support for these activities, is flexible, provides a way to deal with changing risks, can accommodate unknowns, and can respond to changes in the environment quickly. This paper will provide an overview of the TReK lifecycle, a description of the project's environment, and a general overview of project activities.

  20. The SCRAM tool-kit

    NASA Astrophysics Data System (ADS)

    Tamir, David; Flanigan, Lee A.; Weeks, Jack L.; Siewert, Thomas A.; Kimbrough, Andrew G.; McClure, Sidney R.

    1994-01-01

    This paper proposes a new series of on-orbit capabilities to support the near-term Hubble Space Telescope, Extended Duration Orbiter, Long Duration Orbiter, Space Station Freedom, other orbital platforms, and even the future manned Lunar/Mars missions. These proposed capabilities form a toolkit termed Space Construction, Repair, and Maintenance (SCRAM). SCRAM addresses both intra-Vehicular Activity (IVA) and Extra-Vehicular Activity (EVA) needs. SCRAM provides a variety of tools which enable welding, brazing, cutting, coating, heating, and cleaning, as well as corresponding nondestructive examination. Near-term IVA-SCRAM applications include repair and modification to fluid lines, structure, and laboratory equipment inside a shirt-sleeve environment (i.e. inside Spacelab or Space Station). Near-term EVA-SCRAM applications include construction of fluid lines and structural members, repair of punctures by orbital debris, refurbishment of surfaces eroded by contaminants. The SCRAM tool-kit also promises future EVA applications involving mass production tasks automated by robotics and artificial intelligence, for construction of large truss, aerobrake, and nuclear reactor shadow shields structures. The leading candidate tool processes for SCRAM, currently undergoing research and development, include Electron Beam, Gas Tungsten Arc, Plasma Arc, and Laser Beam. A series of strategic space flight experiments would make SCRAM available to help conquer the space frontier.

  1. Sodium and sulfur release and recapture during black liquor burning

    SciTech Connect

    Frederick, W.J.; Iisa, K.; Wag, K.; Reis, V.V.; Boonsongsup, L.; Forssen, M.; Hupa, M.

    1995-08-01

    The objective of this study was to provide data on sulfur and sodium volatilization during black liquor burning, and on SO2 capture by solid sodium carbonate and sodium chloride. This data was interpreted and modeled into rate equations suitable for use in computational models for recovery boilers.

  2. Antioxidant Activity of Berry and Fruit Wines and Liquors.

    PubMed

    Heinonen; Lehtonen; Hopia

    1998-01-19

    A total of 44 different berry and fruit wines and liquors with total phenolic contents between 91 and 1820 mg/L, expressed as gallic acid equivalents (GAE), were evaluated for antioxidant activity. Dealcoholized wine extracts were added to methyl linoleate (MeLo), and the oxidation in the dark at 40 degrees C was followed by conjugated diene measurement. Wines made of mixtures of black currants and crowberries or bilberries (240-275 µM GAE) were slightly superior to reference red grape wines (330-375 µM GAE) and equally as active as the control antioxidant, alpha-tocopherol (50 µM), in inhibiting MeLo hydroperoxide formation. Also, raw materials including apple, arctic bramble, cowberries, cranberries, red currants, or rowanberries possessed antioxidant activity. Thus, these raw materials contain phenolic compounds, some of which are capable of protecting lipids against oxidation also in a hydrophobic lipid system. Liquors, apart from arctic bramble liquor, were less active than wines. However, the total phenolic content did not correlate with the antioxidant activity of the berry and fruit wines and liquors, therefore alleviating the importance of further characterization of the phenolic antioxidants present in berry and fruit wines. PMID:10554191

  3. Research of the measure principle of the liquor resonance sensor

    NASA Astrophysics Data System (ADS)

    Zhou, Qi; Liu, Shengxiong; Xu, Ke; Min, Cuicui; Xu, Shijun; Xiao, Jun

    2007-12-01

    Various sensors based on the piezoelectric crystal have been widely used in the process of research. Currently, the research and application of the piezoelectric sensors are mostly based on the "mass responses" and "non-mass responses" of the piezoelectric crystal. But in the researches and applications of the piezoelectric crystal sensors, many phenomenons have been found which can not be explained and can not accord with the Sauerbrey theory based on the "mass responses". And the scholars often explained those phenomenons with the "non-mass response of the piezoelectric crystal" [1]. In our researches, we improved the detectors and got some primary experimental results. And the results showed that the non-mass respones has no relation to the piezoelectric sensor, and it related to the characteristics of the liquor itself. Based on the results, it can be reckoned that this is a new physical phenomenon, that is to say, the liquor has the electrical resonance characteristic which likes the characteristic of the piezoelectric crystal, and can identify the characteristic of the liquor using the frequency of the electrical resonance. As soon as any of the characteristics of the liquor changed such as component, and density, the resonance frequency will change accordingly.

  4. Development of a forensic evidence protection kit

    NASA Astrophysics Data System (ADS)

    Acton, Brian; Kelly, Roy

    1999-02-01

    A kit has been developed for the preservation of vital forensic evidence on a suspect following a serious assault, murder or other offense where contamination may occur. This also includes the handling of firearms, explosives and/or drugs.

  5. Village Green Project and Air Sensor Kits

    EPA Science Inventory

    This is a presentation for the OAQPS Teachers Workshop. Will provide a background overview on the Village Green Project and our air sensor kit for outreach, then have the teachers try putting it together.

  6. Torch kit for welding in difficult areas

    NASA Technical Reports Server (NTRS)

    Stein, J. A.

    1971-01-01

    Miniature tungsten inert gas welding torch, used with variously formed interchangeable soft copper tubing extensions, provides inexpensive, accurate welding capability for inaccessible joints. Kit effectively welds stainless steel tubing 0.089 cm thick. Other applications are cited.

  7. A comprehensive program to develop correlations for physical properties of kraft black liquor. Final report

    SciTech Connect

    Fricke, A.L.; Zaman, A.A.

    1998-05-01

    The overall objective of the program was to develop correlations to predict physical properties within requirements of engineering precision from a knowledge of pulping conditions and of kraft black liquor composition, if possible. These correlations were to include those relating thermodynamic properties to pulping conditions and liquor composition. The basic premise upon which the research was based is the premise that black liquor behaves as a polymer solution. This premise has proven to be true, and has been used successfully in developing data reduction methods and in interpreting results. A three phase effort involving pulping, analysis of liquor composition, and measurement of liquor properties was conducted.

  8. LEM-CF Premixed Tool Kit

    SciTech Connect

    2015-01-19

    The purpose of LEM-CF Premixed Tool Kit is to process premixed flame simulation data from the LEM-CF solver (https://fileshare.craft-tech.com/clusters/view/lem-cf) into a large-eddy simulation (LES) subgrid model database. These databases may be used with a user-defined-function (UDF) that is included in the Tool Kit. The subgrid model UDF may be used with the ANSYS FLUENT flow solver or other commercial flow solvers.

  9. Aircraft Electric Secondary Power

    NASA Technical Reports Server (NTRS)

    1983-01-01

    Technologies resulted to aircraft power systems and aircraft in which all secondary power is supplied electrically are discussed. A high-voltage dc power generating system for fighter aircraft, permanent magnet motors and generators for aircraft, lightweight transformers, and the installation of electric generators on turbine engines are among the topics discussed.

  10. World commercial aircraft accidents

    SciTech Connect

    Kimura, C.Y.

    1993-01-01

    This report is a compilation of all accidents world-wide involving aircraft in commercial service which resulted in the loss of the airframe or one or more fatality, or both. This information has been gathered in order to present a complete inventory of commercial aircraft accidents. Events involving military action, sabotage, terrorist bombings, hijackings, suicides, and industrial ground accidents are included within this list. Included are: accidents involving world commercial jet aircraft, world commercial turboprop aircraft, world commercial pistonprop aircraft with four or more engines and world commercial pistonprop aircraft with two or three engines from 1946 to 1992. Each accident is presented with information in the following categories: date of the accident, airline and its flight numbers, type of flight, type of aircraft, aircraft registration number, construction number/manufacturers serial number, aircraft damage, accident flight phase, accident location, number of fatalities, number of occupants, cause, remarks, or description (brief) of the accident, and finally references used. The sixth chapter presents a summary of the world commercial aircraft accidents by major aircraft class (e.g. jet, turboprop, and pistonprop) and by flight phase. The seventh chapter presents several special studies including a list of world commercial aircraft accidents for all aircraft types with 100 or more fatalities in order of decreasing number of fatalities, a list of collision accidents involving commercial aircrafts, and a list of world commercial aircraft accidents for all aircraft types involving military action, sabotage, terrorist bombings, and hijackings.

  11. 46 CFR 184.710 - First-aid kits.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false First-aid kits. 184.710 Section 184.710 Shipping COAST... CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Miscellaneous § 184.710 First-aid kits. A vessel must carry either a first-aid kit approved under approval series 160.041 or a kit with equivalent...

  12. 40 CFR 745.88 - Recognized test kits.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Recognized test kits. 745.88 Section... Renovation § 745.88 Recognized test kits. (a) Effective June 23, 2008, EPA recognizes the test kits that have... publicizes its recognition of the first test kit that meets both the negative response and positive...

  13. 46 CFR 184.710 - First-aid kits.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false First-aid kits. 184.710 Section 184.710 Shipping COAST... CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Miscellaneous § 184.710 First-aid kits. A vessel must carry either a first-aid kit approved under approval series 160.041 or a kit with equivalent...

  14. 46 CFR 184.710 - First-aid kits.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false First-aid kits. 184.710 Section 184.710 Shipping COAST... CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Miscellaneous § 184.710 First-aid kits. A vessel must carry either a first-aid kit approved under approval series 160.041 or a kit with equivalent...

  15. 46 CFR 184.710 - First-aid kits.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false First-aid kits. 184.710 Section 184.710 Shipping COAST... CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Miscellaneous § 184.710 First-aid kits. A vessel must carry either a first-aid kit approved under approval series 160.041 or a kit with equivalent...

  16. The Fluid Dynamics Demo Kit: Part I

    NASA Astrophysics Data System (ADS)

    Flack, Karen; Underhill, Patrick; Prestridge, Kathy

    2012-11-01

    The goal of this project is to develop a fluid dynamics demonstration/experiment kit that can be used by professors and graduate students at high school outreach events. The demonstrations in the kit will be easy to use and true crowd pleasers in order to inspire understanding and pique curiosity about the physics of flow. The kits will be inexpensive, containing readily available materials so that teachers can duplicate the demonstrations and experiments. The kits will be left with the teachers as a gift from the American Physics Society. The experiments and demonstrations cover the concepts of conservation of mass, momentum, and energy, Bernoulli's equation, frictional losses and the ideal gas law. For each experiment, the teachers will receive presentation material, access to instructional videos, plus a worksheet that can be used in a high school physics classroom. This kit has been developed through the efforts of the APS-DFD Mentoring and Outreach Committee and has received funding from the APS-DFD. Work funded by the APS-DFD.

  17. Control of Oocyte Reawakening by Kit.

    PubMed

    Saatcioglu, Hatice Duygu; Cuevas, Ileana; Castrillon, Diego H

    2016-08-01

    In mammals, females are born with finite numbers of oocytes stockpiled as primordial follicles. Oocytes are "reawakened" via an ovarian-intrinsic process that initiates their growth. The forkhead transcription factor Foxo3 controls reawakening downstream of PI3K-AKT signaling. However, the identity of the presumptive upstream cell surface receptor controlling the PI3K-AKT-Foxo3 axis has been questioned. Here we show that the receptor tyrosine kinase Kit controls reawakening. Oocyte-specific expression of a novel constitutively-active KitD818V allele resulted in female sterility and ovarian failure due to global oocyte reawakening. To confirm this result, we engineered a novel loss-of-function allele, KitL. Kit inactivation within oocytes also led to premature ovarian failure, albeit via a contrasting phenotype. Despite normal initial complements of primordial follicles, oocytes remained dormant with arrested oocyte maturation. Foxo3 protein localization in the nucleus versus cytoplasm explained both mutant phenotypes. These genetic studies provide formal genetic proof that Kit controls oocyte reawakening, focusing future investigations into the causes of primary ovarian insufficiency and ovarian aging. PMID:27500836

  18. Control of Oocyte Reawakening by Kit

    PubMed Central

    Castrillon, Diego H.

    2016-01-01

    In mammals, females are born with finite numbers of oocytes stockpiled as primordial follicles. Oocytes are “reawakened” via an ovarian-intrinsic process that initiates their growth. The forkhead transcription factor Foxo3 controls reawakening downstream of PI3K-AKT signaling. However, the identity of the presumptive upstream cell surface receptor controlling the PI3K-AKT-Foxo3 axis has been questioned. Here we show that the receptor tyrosine kinase Kit controls reawakening. Oocyte-specific expression of a novel constitutively-active KitD818V allele resulted in female sterility and ovarian failure due to global oocyte reawakening. To confirm this result, we engineered a novel loss-of-function allele, KitL. Kit inactivation within oocytes also led to premature ovarian failure, albeit via a contrasting phenotype. Despite normal initial complements of primordial follicles, oocytes remained dormant with arrested oocyte maturation. Foxo3 protein localization in the nucleus versus cytoplasm explained both mutant phenotypes. These genetic studies provide formal genetic proof that Kit controls oocyte reawakening, focusing future investigations into the causes of primary ovarian insufficiency and ovarian aging. PMID:27500836

  19. Physical properties of kraft black liquor. Final report. Phase I

    SciTech Connect

    Fricke, A.L.

    1983-12-01

    Methods were selected, equipment installed, and procedures developed for determining rheological properties; for determining thermal properties (stability, density, thermal expansion, and heat capacity); for purification and characterization of lignin (glass transition, stability, weight average molecular weight, and number average molecular weight); and for performing chemical analyses (negative inorganic ions, positive inorganic ions, acid organic salts, lignin, and total solids). A strategy for pulping to supply test liquors was developed, and a statistically designed pulping experiment was specified for a Southern softwood species. Arrangements were made for performing initial pulping work in an industrial pilot plant, and a preliminary set of pulping experiments were conducted. Liquors from the preliminary pulping experiments were used to test procedures and to determine reproducibility of the experiment. Literature was also surveyed and preliminary selection of designs for a pilot digester, and for equipment to determine surface tension were made.

  20. Studies on synthesis of alumina nanopowder from synthetic Bayer liquor

    SciTech Connect

    Mazloumi, Mahyar; Arami, Hamed; Khalifehzadeh, Razieh; Sadrnezhaad, S.K. . E-mail: sadrnezh@sharif.edu

    2007-06-05

    Procedure for synthesis of alumina nanopowder from Bayer liquor (synthetic sodium aluminate solution) is investigated. Cooling, ageing and then addition of 3 ml/l Tiron (1,2-dihydroxy-3,5-benzene disulfonic acid disodium salt) to the supersaturated liquor affect purity and fineness of the nanopowder product. X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and energy dispersive X-ray (EDAX) analyses indicate that purity of the alumina nanopowder increases with the aging time. Experimental observations show that highly pure alumina nanopowders could be produced by direct calcination of cold gelatinous sodium aluminate solution followed by careful washing at a Tiron concentration of 3 ml/l NaOH.

  1. Conceptual design of a black liquor gasification pilot plant

    SciTech Connect

    Kelleher, E. G.

    1987-08-01

    In July 1985, Champion International completed a study of kraft black liquor gasification and use of the product gases in a combined cycle cogeneration system based on gas turbines. That study indicated that gasification had high potential as an alternative to recovery boiler technology and offered many advantages. This paper describes the design of the plant, the construction of the pilot plant, and finally presents data from operation of the plant.

  2. Propulsion controlled aircraft computer

    NASA Technical Reports Server (NTRS)

    Cogan, Bruce R. (Inventor)

    2010-01-01

    A low-cost, easily retrofit Propulsion Controlled Aircraft (PCA) system for use on a wide range of commercial and military aircraft consists of an propulsion controlled aircraft computer that reads in aircraft data including aircraft state, pilot commands and other related data, calculates aircraft throttle position for a given maneuver commanded by the pilot, and then displays both current and calculated throttle position on a cockpit display to show the pilot where to move throttles to achieve the commanded maneuver, or is automatically sent digitally to command the engines directly.

  3. Fermentation to ethanol of pentose-containing spent sulphite liquor

    SciTech Connect

    Yu, S.; Wayman, M.; Parekh, S.K.

    1987-06-01

    Ethanolic fermentation of spent sulphite liquor with ordinary bakers' yeast is incomplete because this yeast cannot ferment the pentose sugars in the liquor. This results in poor alcohol yields, and a residual effluent problem. By using the yeast Candida shehatae (R) for fermentation of the spent sulphite liquor from a large Canadian alcohol-producing sulphite pulp and paper mill, pentoses as well as hexoses were fermented nearly completely, alcohol yields were raised by 33%, and sugar removal increased by 46%. Inhibitors were removed prior to fermentation by steam stripping. Major benefits were obtained by careful recycling of this yeast, which was shown to be tolerant both of high sugar concentrations and high alcohol concentrations. When sugar concentrations over 250 g/L (glucose:xylose 70:30) were fermented, ethanol became an inhibitor when its concentration reached 90 g/L. However, when the ethanol was removed by low-temperature vacuum distillation, fermentation continued and resulted in a yield of 0.50 g ethanol/g sugar consumed. Further improvement was achieved by combining enzyme saccharification of sugar oligomers with fermentation. This yeast is able to ferment both hexoses and pentoses simultaneously, efficiently, and rapidly. Present indications are that it is well suited to industrial operations wherever hexoses and pentoses are both to be fermented to ethanol, for example, in wood hydrolysates. (Refs. 6).

  4. Fermentation to ethanol of pentose-containing spent sulfite liquor

    SciTech Connect

    Yu, S.; Wayman, M.; Parekh, S.K.

    1987-01-01

    Ethanolic fermentation of spent sulfite liquor with ordinary bakers' yeast is incomplete because of this yeast cannot ferment the pentose sugars in the liquor. This results in poor alcohol yields, and a residual effluent problem. By using the yeast Candida shehatae (R) for fermentation of the spent sulfite liquor from a large Canadian alcohol-producing sulfite pulp and paper mill, pentoses as well as hexoses were fermented nearly completely, alcohol yields were raised by 33%, and sugar removal increased by 46%. Inhibitors were removed prior to fermentation by steam stripping. Major benefits were obtained by careful recycling of this yeast, which was shown to be tolerant both of high sugar concentrations and high alcohol concentrations. When sugar concentrations over 250 g/L (glucose:xylose 70:30) were fermented, ethanol became an inhibitor when its concentration reached over 90 g/L. However, when the ethanol was removed by low-temperature vacuum distillation, fermentation continued and resulted in a yield of 0.50 g ethanol/g sugar consumed. Further improvement was achieved by combining enzyme saccharification of sugar oligomers with fermentation. This yeast is able to ferment both hexoses and pentoses simultaneously, efficiently, and rapidly.

  5. Alberta's and Ontario's liquor boards: why such divergent outcomes?

    PubMed

    Bird, Malcolm G

    2010-01-01

    The provinces of Alberta and Ontario have chosen very different methods to distribute alcoholic beverages: Alberta privatized the Alberta Liquor Control Board (ALCB) in 1993 and established a private market to sell beverage alcohol, while Ontario, in stark contrast, opted to retain and expand the Liquor Control Board of Ontario (LCBO). This article examines the reasons for the divergent policy choices made by Ralph Klein and Mike Harris' Conservative governments in each province. The article draws on John Kingdon's “multiple streams decision-making model,” to examine the mindsets of the key decision-makers, as well as “historical institutionalism,” to organize the pertinent structural, historical and institutional variables that shaped the milieu in which decision-makers acted. Unique, province-specific political cultures, histories, institutional configurations (including the relative influence of a number of powerful actors), as well as the fact that the two liquor control boards were on opposing trajectories towards their ultimate fates, help to explain the different decisions made by each government. Endogenous preference construction in this sector, furthermore, implies that each system is able to satisfy all relevant stakeholders, including consumers.

  6. Field Test Kit for Gun Residue Detection

    SciTech Connect

    WALKER, PAMELA K.; RODACY, PHILIP J.

    2002-01-01

    One of the major needs of the law enforcement field is a product that quickly, accurately, and inexpensively identifies whether a person has recently fired a gun--even if the suspect has attempted to wash the traces of gunpowder off. The Field Test Kit for Gunshot Residue Identification based on Sandia National Laboratories technology works with a wide variety of handguns and other weaponry using gunpowder. There are several organic chemicals in small arms propellants such as nitrocellulose, nitroglycerine, dinitrotoluene, and nitrites left behind after the firing of a gun that result from the incomplete combustion of the gunpowder. Sandia has developed a colorimetric shooter identification kit for in situ detection of gunshot residue (GSR) from a suspect. The test kit is the first of its kind and is small, inexpensive, and easily transported by individual law enforcement personnel requiring minimal training for effective use. It will provide immediate information identifying gunshot residue.

  7. Shuttle Kit Freezer Refrigeration Unit Conceptual Design

    NASA Technical Reports Server (NTRS)

    Copeland, R. J.

    1975-01-01

    The refrigerated food/medical sample storage compartment as a kit to the space shuttle orbiter is examined. To maintain the -10 F in the freezer kit, an active refrigeration unit is required, and an air cooled Stirling Cycle refrigerator was selected. The freezer kit contains two subsystems, the refrigeration unit, and the storage volume. The freezer must provide two basic capabilities in one unit. One requirement is to store 215 lbs of food which is consumed in a 30-day period by 7 people. The other requirement is to store 128.3 lbs of medical samples consisting of both urine and feces. The unit can be mounted on the lower deck of the shuttle cabin, and will occupy four standard payload module compartments on the forward bulkhead. The freezer contains four storage compartments.

  8. FES kinase participates in KIT-ligand induced chemotaxis

    SciTech Connect

    Voisset, Edwige; Lopez, Sophie; Chaix, Amandine; Vita, Marina; George, Coralie; Dubreuil, Patrice; De Sepulveda, Paulo

    2010-02-26

    FES is a cytoplasmic tyrosine kinase activated by several membrane receptors, originally identified as a viral oncogene product. We have recently identified FES as a crucial effector of oncogenic KIT mutant receptor. However, FES implication in wild-type KIT receptor function was not addressed. We report here that FES interacts with KIT and is phosphorylated following activation by its ligand SCF. Unlike in the context of oncogenic KIT mutant, FES is not involved in wild-type KIT proliferation signal, or in cell adhesion. Instead, FES is required for SCF-induced chemotaxis. In conclusion, FES kinase is a mediator of wild-type KIT signalling implicated in cell migration.

  9. FES kinase participates in KIT-ligand induced chemotaxis.

    PubMed

    Voisset, Edwige; Lopez, Sophie; Chaix, Amandine; Vita, Marina; George, Coralie; Dubreuil, Patrice; De Sepulveda, Paulo

    2010-02-26

    FES is a cytoplasmic tyrosine kinase activated by several membrane receptors, originally identified as a viral oncogene product. We have recently identified FES as a crucial effector of oncogenic KIT mutant receptor. However, FES implication in wild-type KIT receptor function was not addressed. We report here that FES interacts with KIT and is phosphorylated following activation by its ligand SCF. Unlike in the context of oncogenic KIT mutant, FES is not involved in wild-type KIT proliferation signal, or in cell adhesion. Instead, FES is required for SCF-induced chemotaxis. In conclusion, FES kinase is a mediator of wild-type KIT signalling implicated in cell migration.

  10. FUELS IN SOIL TEST KIT: FIELD USE OF DIESEL DOG SOIL TEST KITS

    SciTech Connect

    Unknown

    2001-05-31

    Western Research Institute (WRI) is commercializing Diesel Dog Portable Soil Test Kits for performing analysis of fuel-contaminated soils in the field. The technology consists of a method developed by WRI (U.S. Patents 5,561,065 and 5,976,883) and hardware developed by WRI that allows the method to be performed in the field (patent pending). The method is very simple and does not require the use of highly toxic reagents. The aromatic components in a soil extract are measured by absorption at 254 nm with a field-portable photometer. WRI added significant value to the technology by taking the method through the American Society for Testing and Materials (ASTM) approval and validation processes. The method is designated ASTM Method D-5831-96, Standard Test Method for Screening Fuels in Soils. This ASTM designation allows the method to be used for federal compliance activities. In FY 99, twenty-five preproduction kits were successfully constructed in cooperation with CF Electronics, Inc., of Laramie, Wyoming. The kit components work well and the kits are fully operational. In the calendar year 2000, kits were provided to the following entities who agreed to participate as FY 99 and FY 00 JSR (Jointly Sponsored Research) cosponsors and use the kits as opportunities arose for field site work: Wyoming Department of Environmental Quality (DEQ) (3 units), F.E. Warren Air Force Base, Gradient Corporation, The Johnson Company (2 units), IT Corporation (2 units), TRC Environmental Corporation, Stone Environmental, ENSR, Action Environmental, Laco Associates, Barenco, Brown and Caldwell, Dames and Moore Lebron LLP, Phillips Petroleum, GeoSyntek, and the State of New Mexico. By early 2001, ten kits had been returned to WRI following the six-month evaluation period. On return, the components of all ten kits were fully functional. The kits were upgraded with circuit modifications, new polyethylene foam inserts, and updated instruction manuals.

  11. A method for determining iron-containing components of liquor in neurosurgical problems

    NASA Astrophysics Data System (ADS)

    Semibratova, V. A.; Titov, Yu. M.

    2008-09-01

    Results of spectral studies of human liquor aimed at determining the specific features of its composition arising as a result of neurosurgical diseases and during the recovery period are presented. A method for detecting characteristic bands attributed to pathology, which is based on precision measurements of the UV-VIS absorption spectra of liquor and on their subsequent computer analysis is presented. With this method, ironcontaining components of liquor can be qualitatively and quantitatively determined, which is important in solving neurosurgical problems.

  12. Unmanned aircraft systems

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Unmanned platforms have become increasingly more common in recent years for acquiring remotely sensed data. These aircraft are referred to as Unmanned Airborne Vehicles (UAV), Remotely Piloted Aircraft (RPA), Remotely Piloted Vehicles (RPV), or Unmanned Aircraft Systems (UAS), the official term used...

  13. Layered double hydroxide formation in Bayer liquor and its promotional effect on oxalate precipitation

    SciTech Connect

    Perrotta, A.J.; Williams, F.

    1996-10-01

    Enhancing the precipitation of sodium oxalate from Bayer process liquor to improve the quality of alumina product remains an important objective for Bayer refining. The formation of layered double hydroxides by the reaction of alkaline earth oxides, such as lime and magnesia, with Bayer liquor gives a crystal structure which is capable of intercalating anions, both inorganic and organic, within its structure. Both lime and magnesia, with long contact times in Bayer liquor, show layered double hydroxide formation. This layered double hydroxide formation is accompanied with a decrease in the sodium oxalate content in the liquor from about 3 g/L to below 1 g/L. Short contact times lead to a destabilization of the liquor which facilitates sodium oxalate precipitation. Additional work on magnesium hydroxide shows, in comparison to lime and magnesia, much less layered double hydroxide formation with equivalent residence time in the liquor. Destabilization of the liquor also occurs, giving enhanced oxalate precipitation with less alumina being consumed in agreement with lower layered double hydroxide formation. Thermal regeneration of these structures, followed by in-situ recrystallization in Bayer liquor, also gives enhanced oxalate precipitation, suggesting that there is an opportunity for a regenerable oxalate reduction system. The implementation of these experiments and other related technology into the plant has resulted in the Purox Process for enhancing the precipitation of sodium oxalate from Bayer liquor.

  14. Malt liquor marketing in inner cities: the role of neighborhood racial composition.

    PubMed

    McKee, Pat; Jones-Webb, Rhonda; Hannan, Peter; Pham, Lan

    2011-01-01

    In response to anecdotal reports that African American neighborhoods are targeted for high-alcohol malt liquor advertising, the authors observed alcohol ads on off-premise alcohol outlets, billboards, and transit structures in 10 U.S. cities over 3 years. Malt liquor ads were prevalent on storefronts, but rare on billboards. Using Poisson regression, the authors found that storefront malt liquor ads were more common in neighborhoods with higher percentages of African Americans, even after controlling for social and physical disorder. Results suggest that policymakers attempting to reduce malt liquor-related harms may do well to consider regulations that limit storefront advertising exposure.

  15. A comprehensive program to develop correlations for physical properties of kraft black liquor. Final report

    SciTech Connect

    Fricke, A.L.; Zaman, A.A.; Stoy, M.O.; Schmidl, G.W.; Dong, D.J.; Speck, B.

    1998-04-01

    A wide variety of experimental techniques have been used in this work, and many of these have been developed completely or improved significantly in the course of the research done during this program. Therefore, it is appropriate to describe these techniques in detail as a reference for future workers so that the techniques can be used in future work with little additional effort or so that the results reported from this program can be compared better with future results from other work. In many cases, the techniques described are for specific analytical instruments. It is recognized that these may be superseded by future developments and improvements in instrumentation if a complete description of techniques used successfully in the past on other instrumentation is available. The total pulping and liquor preparation research work performed included chip and white liquor preparation, digestion, pulp washing, liquor and wash recovery, liquor sampling, weak liquor concentration in two steps to about 45--50% solids with an intermediate soap skimming at about 140F and 27--30% solids, determination of pulp yield and Kappa number, determination of total liquor solids, and a check on the total material balance for pulping. All other research was performed either on a sample of the weak black liquor (the combined black liquor and washes from the digester) or on the skimmed liquor that had been concentrated.

  16. Test kit testing certifies soil screening accuracy

    SciTech Connect

    Neal, L.K.

    1994-08-01

    With quality controls and validation, site managers can use immunoassay with confidence. It is not enough to know which hazardous substances have contaminated a site. A manager must have an idea about how much is present and where. Traditionally, gas chromatography and mass spectrometry answered these questions, but today immunoassay soil test kits often provide more immediate results at a lower cost.

  17. 47 CFR 15.25 - Kits.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... product to be marketed. If all components required to fully complete the kit (other than those specified... the recommended components. The assembled units shall be certified or authorized under the Declaration... interference that may cause undesired operation. (e) For the purpose of this section, circuit boards used...

  18. Theft Detection and Prevention. SPEC Kit 37.

    ERIC Educational Resources Information Center

    Association of Research Libraries, Washington, DC. Office of Management Studies.

    A 1977 Association of Research Libraries (ARL) survey of member institutions concerning book losses and theft detection systems found that more than half of the 90 respondents had installed or were installing electronic security systems (ESS's). This kit on theft detection and prevention in academic libraries contains: (1) planning documents from…

  19. Beyond the Science Kit: Inquiry in Action.

    ERIC Educational Resources Information Center

    Saul, Wendy, Ed.; Reardon, Jeanne, Ed.

    The essays in this book are about values that are being used to drive science instruction in remarkable ways. The essays are divided into three sections. The first section contains two essays about science kits and determines the problem that the rest of the book addresses. The essays in the second section offer a glimpse of what five teachers see…

  20. Networked Information Resources. SPEC Kit 253.

    ERIC Educational Resources Information Center

    Bleiler, Richard, Comp.; Plum, Terry, Comp.

    1999-01-01

    This SPEC Kit, published six times per year, examines how Association of Research Libraries (ARL) libraries have structured themselves to identify networked information resources in the market, to evaluate them for purchase, to make purchasing decisions, to publicize them, and to assess their continued utility. In the summer of 1999, the survey…

  1. Learning Disabilities In-Service Training Kit.

    ERIC Educational Resources Information Center

    Simpson, Bickley

    Included in the training kit for teachers in the area of learning disabilities are materials developed by Project Lighthouse for experimental field usage to test the materials. The problem of educating children with learning disabilities is summarized, as is Piaget's model of logical activity. The major divisions of the text then deal with the…

  2. Thermal protection system flight repair kit

    NASA Technical Reports Server (NTRS)

    1979-01-01

    A thermal protection system (TPS) flight repair kit required for use on a flight of the Space Transportation System is defined. A means of making TPS repairs in orbit by the crew via extravehicular activity is discussed. A cure in place ablator, a precured ablator (large area application), and packaging design (containers for mixing and dispensing) for the TPS are investigated.

  3. Lifeprints ESL for Adults: Literacy. [Multimedia Kit].

    ERIC Educational Resources Information Center

    Cunningham Florez, MaryAnn

    Lifeprints is a four-level program that helps adult English- as-a-Second-Language (ESL) students gain the English language skills they need to participate effectively at work and in their communities. This multimedia kit contains the first level in the series. Level one is divided into six units: "Welcome to English Class"; "Personal Information";…

  4. Countdown to Six Billion Teaching Kit.

    ERIC Educational Resources Information Center

    Zero Population Growth, Inc., Washington, DC.

    This teaching kit features six activities focused on helping students understand the significance of the world population reaching six billion for our society and our environment. Featured activities include: (1) History of the World: Part Six Billion; (2) A Woman's Place; (3) Baby-O-Matic; (4) Earth: The Apple of Our Eye; (5) Needs vs. Wants; and…

  5. Lead Paint Test Kits Workshop: Summary Report

    EPA Science Inventory

    The U.S. Environmental Protection Agency's (EPA) Office of Research and Development (ORD) designed and conducted the Lead Paint Test Kits Workshop on October 19 and 20, 2006, at the Environmental Protection Agency's Research Triangle Park, NC campus. The workshop was conducted as...

  6. Teen PACK: Population Awareness Campaign Kit.

    ERIC Educational Resources Information Center

    Zero Population Growth, Inc., Washington, DC.

    This packet of instructional materials is designed to teach teenagers about the effects of overpopulation on the world and on the individual. Information is presented in three related booklets. The first of the three parts of the "Teen Population Awareness Campaign Kit," illustrates overpopulation through profiles of teens living in Shanghai,…

  7. Library Photocopy Operations. SPEC Kit 209.

    ERIC Educational Resources Information Center

    Almony, Robert A., Jr., Comp.; O'Brien, Francis, Comp.

    The kit and flyer examine library photocopy operations, including services, personnel, equipment, and financial management practices by member institutions of the Association of Research Libraries (ARL). To find out about these operations, ARL surveyed its 112 members, and received 93 replies. Forty-nine academic libraries (58%) described their…

  8. The Interview Process. SPEC Kit 260.

    ERIC Educational Resources Information Center

    Frank, Heidi, Comp.; Nicholson, Shawn, Comp.; Dickson, Laura, Comp.; Miller, Terri Tickle, Comp.

    2000-01-01

    This SPEC (Systems and Procedures Exchange Center) Kit reports results of a survey of ARL (Association of Research Libraries) that examined the nature and structure of the interview process at large research and academic libraries in the United States and Canada. By determining the nature and structure of the interview, it is hoped that candidates…

  9. Working with Older People. A Resource Kit.

    ERIC Educational Resources Information Center

    Ohio State Commission on Aging, Columbus.

    This resource kit for working with older people consists of an instructor's guide, a package of simulation training materials, and performance-based teacher education modules. Topics covered in the instructor's guide are understanding the common problems of working with older people, selecting problem areas for trainees, developing plans for using…

  10. Press kit kicks off new branding.

    PubMed

    Rees, Tom

    2004-01-01

    A smartly produced press kit resulted in unprecedented news coverage when Denver's Porter Adventist Hospital recently unveiled plans for an extensive 80 million dollars redevelopment. A news conference was held to announce this plan, along with the opening of the hospital's new emergency department. The overall effort is part of the new branding strategy of the 75-year-old hospital.

  11. SunWise[R] Meteorologist Tool Kit

    ERIC Educational Resources Information Center

    US Environmental Protection Agency, 2007

    2007-01-01

    The SunWise Program is designed to help meteorologists raise sun safety awareness by addressing the science of the sun, the risk of overexposure to its ultraviolet (UV) radiation, and what students and their families can do to protect themselves from overexposure. This Tool Kit has been designed for use all over the United States and its…

  12. Allocation of Resources. SPEC Kit 31.

    ERIC Educational Resources Information Center

    Association of Research Libraries, Washington, DC. Office of Management Studies.

    This kit on resource allocation in academic and research libraries contains nine primary source documents and a concise summary of a 1976 Association of Research Libraries (ARL) survey on management of fiscal spending activities in ARL libraries. Based on responses from 70 libraries, the summary discusses 3 specific subjects within the general…

  13. Career and Occupational Development Kit. Instruction Manual.

    ERIC Educational Resources Information Center

    Education Commission of the States, Denver, CO. National Assessment of Educational Progress.

    This manual is part of a kit consisting of four documents which bring together different types of items that measure a number of career and occupational development (COD) objectives developed by the National Assessment of Educational Progress (NAEP). (NAEP--which completed a national survey measuring the achievement of knowledge, skills,…

  14. Earth Is My Home, Kit I.

    ERIC Educational Resources Information Center

    1971

    Introducing the pupil to the science of ecology is the purpose of Scholastic's Earth Corps Ecology/Conservation Study Kits for grades 3-6. Simple terms are used to show how all living things are inter-related to their environment, to demonstrate the intricate and delicate balance of nature, and to point out how man's interference with nature's…

  15. You Be the Chemist [Multimedia Kit].

    ERIC Educational Resources Information Center

    National Association of Chemical Distributors, Arlington, VA. Educational Foundation.

    This multimedia kit includes a teacher's manual, video, and activity packet. The unique interactive course uses safe, controlled dynamic experiments to teach kids about chemistry, the proper handling of chemicals, and responsible product stewardship. Students are asked to hypothesize about chemical substances, collect and analyze data, and share…

  16. Haitian Component Bibliography. Migrant Heritage Studies Kit.

    ERIC Educational Resources Information Center

    Roark-Calnek, Sue, Comp.

    This 587-item annotated bibliography, designed as a supplement to the Haitian Component of the Migrant Heritage Studies Kit, provides access to additional information, including audiovisual materials, on resources on Haiti and Haitian immigrants, published between 1877 and 1984. Part I is a "General Bibliography" which includes 313 sources on…

  17. Fee-Based Services. SPEC Kit 259.

    ERIC Educational Resources Information Center

    Jenda, Claudine, Comp.

    2000-01-01

    This SPEC (Systems and Procedures Exchange Center) Kit reports results of a survey that examined how many Association of Research Libraries (ARL) libraries offer fee-based services to their external users, the procedures and organizational structures of such services, and the factors that contribute to a successful fee-based service program. For…

  18. Managing Printing Services. SPEC Kit 254.

    ERIC Educational Resources Information Center

    Blixrud, Julia C., Comp.

    2000-01-01

    This SPEC (Systems and Procedures Exchange Center) Kit reports results of a survey that examined how Association of Research Libraries (ARL) members currently provide printing services to their users and how the costs of those services are covered. Of the 122 members surveyed, 62 responded. Included in the responses was information on main, law,…

  19. "Ten Years in a Box": A Multi-Media Kit

    ERIC Educational Resources Information Center

    Educational Television International, 1970

    1970-01-01

    Discussed are the preparation and contents of a multimedia kit designed to supplement educational television programs dealing with the Depression. The article is condensed from a report. The 1930s Multi-Media Kit, by Anthony Barton. (LS)

  20. 21 CFR 872.3570 - OTC denture repair kit.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3570 OTC denture repair kit. (a) Identification. An OTC denture repair kit is a device consisting of a material, such as a resin monomer system...

  1. 21 CFR 872.3570 - OTC denture repair kit.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3570 OTC denture repair kit. (a) Identification. An OTC denture repair kit is a device consisting of a material, such as a resin monomer system...

  2. 21 CFR 872.3570 - OTC denture repair kit.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3570 OTC denture repair kit. (a) Identification. An OTC denture repair kit is a device consisting of a material, such as a resin monomer system...

  3. Test/QA Plan for Verification of Microcystin Test Kits

    EPA Science Inventory

    Microcystin test kits are used to quantitatively measure total microcystin in recreational waters. These test kits are based on enzyme-linked immunosorbent assays (ELISA) with antibodies that bind specifically to microcystins or phosphate activity inhibition where the phosphatas...

  4. C-kit overexpression correlates with KIT gene copy numbers increases in phyllodes tumors of the breast.

    PubMed

    Liu, Junjun; Liu, Xiaozhen; Feng, Xiaolong; Liu, Jian; Lv, Shuhua; Zhang, Wei; Niu, Yun

    2015-01-01

    We determined c-kit expression in the stroma and epithelia of benign, borderline, and malignant phyllodes tumors (PTs), respectively, as well as the relationship between c-kit expression in stromal elements and KIT gene copy number variations (CNVs). To assess c-kit expression and KIT CNVs, 348 PT cases were studied: 120 (34.4 %) benign cases, 115 (33.1 %) borderline cases, and 113 (32.5 %) malignant cases. All of these cases were evaluated for c-kit (CD117) expression using immunohistochemistry. Forty-two cases (29 c-kit-positive in the stromal cells cases and 13 negative cases) were investigated for KIT gene CNVs via genomic polymerase chain reaction (PCR). The overall rate of c-kit positivity in the stroma was 46.8 %, as well as 24.2, 53.1, and 64.6 %, respectively, in PTs of three different grades. However, in the majority of cases, the epithelia were c-kit positive (98.2 %), and the positivity was 100, 99.1, and 95 % in PTs of three different grades, respectively. There was a significant change in the expression of c-kit in the stroma and epithelia according to grade (P < 0.001, P = 0.014). From the genomic PCR results, we can confirm that c-kit positivity in the stroma is directly correlated with KIT gene copy numbers increases (P = 0.003, P = 0.041). We demonstrated that c-kit expression in the stroma of PTs is positively associated with malignancy. c-Kit epithelial positivity was inversely correlated with PTs malignancy. c-Kit overexpression in the stroma was related to KIT gene copy numbers increases. PMID:25534827

  5. Aircraft landing gear systems

    NASA Technical Reports Server (NTRS)

    Tanner, John A. (Editor)

    1990-01-01

    Topics presented include the laboratory simulation of landing gear pitch-plane dynamics, a summary of recent aircraft/ground vehicle friction measurement tests, some recent aircraft tire thermal studies, and an evaluation of critical speeds in high-speed aircraft. Also presented are a review of NASA antiskid braking research, titanium matrix composite landing gear development, the current methods and perspective of aircraft flotation analysis, the flow rate and trajectory of water spray produced by an aircraft tire, and spin-up studies of the Space Shuttle Orbiter main gear tire.

  6. 46 CFR 121.710 - First-aid kits.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false First-aid kits. 121.710 Section 121.710 Shipping COAST... SYSTEMS AND EQUIPMENT Miscellaneous § 121.710 First-aid kits. A vessel must carry either a first-aid kit... kits, the contents must be stowed in a suitable, watertight container that is marked “First-Aid Kit”....

  7. 46 CFR 121.710 - First-aid kits.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false First-aid kits. 121.710 Section 121.710 Shipping COAST... SYSTEMS AND EQUIPMENT Miscellaneous § 121.710 First-aid kits. A vessel must carry either a first-aid kit... kits, the contents must be stowed in a suitable, watertight container that is marked “First-Aid Kit”....

  8. 46 CFR 121.710 - First-aid kits.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false First-aid kits. 121.710 Section 121.710 Shipping COAST... SYSTEMS AND EQUIPMENT Miscellaneous § 121.710 First-aid kits. A vessel must carry either a first-aid kit... kits, the contents must be stowed in a suitable, watertight container that is marked “First-Aid Kit”....

  9. 46 CFR 121.710 - First-aid kits.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false First-aid kits. 121.710 Section 121.710 Shipping COAST... SYSTEMS AND EQUIPMENT Miscellaneous § 121.710 First-aid kits. A vessel must carry either a first-aid kit... kits, the contents must be stowed in a suitable, watertight container that is marked “First-Aid Kit”....

  10. 46 CFR 121.710 - First-aid kits.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false First-aid kits. 121.710 Section 121.710 Shipping COAST... SYSTEMS AND EQUIPMENT Miscellaneous § 121.710 First-aid kits. A vessel must carry either a first-aid kit... kits, the contents must be stowed in a suitable, watertight container that is marked “First-Aid Kit”....

  11. Small transport aircraft technology

    NASA Technical Reports Server (NTRS)

    Williams, L. J.

    1983-01-01

    Information on commuter airline trends and aircraft developments is provided to upgrade the preliminary findings of a NASA-formed small transport aircraft technology (STAT) team, established to determine whether the agency's research and development programs could help commuter aircraft manufacturers solve technical problems related to passenger acceptance and use of 19- to 50-passenger aircraft. The results and conclusions of the full set of completed STAT studies are presented. These studies were performed by five airplane manufacturers, five engine manufacturers, and two propeller manufacturers. Those portions of NASA's overall aeronautics research and development programs which are applicable to commuter aircraft design are summarized. Areas of technology that might beneficially be expanded or initiated to aid the US commuter aircraft manufacturers in the evolution of improved aircraft for the market are suggested.

  12. Generation of PHB from Spent Sulfite Liquor Using Halophilic Microorganisms

    PubMed Central

    Weissgram, Michaela; Gstöttner, Janina; Lorantfy, Bettina; Tenhaken, Raimund; Herwig, Christoph; Weber, Hedda K.

    2015-01-01

    Halophilic microorganisms thrive at elevated concentrations of sodium chloride up to saturation and are capable of growing on a wide variety of carbon sources like various organic acids, hexose and also pentose sugars. Hence, the biotechnological application of these microorganisms can cover many aspects, such as the treatment of hypersaline waste streams of different origin. Due to the fact that the high osmotic pressure of hypersaline environments reduces the risk of contamination, the capacity for cost-effective non-sterile cultivation can make extreme halophilic microorganisms potentially valuable organisms for biotechnological applications. In this contribution, the stepwise use of screening approaches, employing design of experiment (DoE) on model media and subsequently using industrial waste as substrate have been implemented to investigate the applicability of halophiles to generate PHB from the industrial waste stream spent sulfite liquor (SSL). The production of PHB on model media as well as dilutions of industrial substrate in a complex medium has been screened for by fluorescence microscopy using Nile Blue staining. Screening was used to investigate the ability of halophilic microorganisms to withstand the inhibiting substances of the waste stream without negatively affecting PHB production. It could be shown that neither single inhibiting substances nor a mixture thereof inhibited growth in the investigated range, hence, leaving the question on the inhibiting mechanisms open. However, it could be demonstrated that some haloarchaea and halophilic bacteria are able to produce PHB when cultivated on 3.3% w/w dry matter spent sulfite liquor, whereas H. halophila was even able to thrive on 6.6% w/w dry matter spent sulfite liquor and still produce PHB.

  13. Clarification of Orange Press Liquors by PVDF Hollow Fiber Membranes

    PubMed Central

    Simone, Silvia; Conidi, Carmela; Ursino, Claudia; Cassano, Alfredo; Figoli, Alberto

    2016-01-01

    Press liquors are typical by-products of the citrus juice processing characterized by a high content of organic compounds and associated problems of environmental impact, which imply high treatment costs. However, these wastes contain a great number of health promoting substances, including fibers, carotenoids and phenolic compounds (mainly flavonoids), whose recovery against waste-destruction technologies is very attractive for new business opportunities. In this work, the clarification of orange press liquor by using microfiltration (MF) membranes is studied as a preliminary step to obtain a permeate stream enriched in antioxidant compounds which can be further processed to produce extracts of nutraceutical and/or pharmaceutical interest. MF poly(vinylidene fluoride) (PVDF) hollow fibers were prepared by the dry/wet spinning technique. A series of fibers was produced from the same polymeric dope, in order to investigate the effect of selected spinning parameters, i.e., bore fluid composition and flowrate, on their properties. The morphology of the produced fibers was analyzed by Scanning Electron Microscopy (SEM). Fibers were further characterized for their mechanical properties, porosity, bubble point, pore size distribution and pure water permeability (PWP). Some of the produced fibers exhibited high permeability (pure water permeability ~530 L/m2·h·bar), coupled to good mechanical resistance and pore size in the range of MF membranes. These fibers were selected and used for the clarification of press liquor from orange peel processing. In optimized operating conditions, the selected fibers produced steady-state fluxes of about 41 L/m2·h with rejections towards polyphenols and total antioxidant activity of 4.1% and 1.4%, respectively. PMID:26805899

  14. Generation of PHB from Spent Sulfite Liquor Using Halophilic Microorganisms

    PubMed Central

    Weissgram, Michaela; Gstöttner, Janina; Lorantfy, Bettina; Tenhaken, Raimund; Herwig, Christoph; Weber, Hedda K.

    2015-01-01

    Halophilic microorganisms thrive at elevated concentrations of sodium chloride up to saturation and are capable of growing on a wide variety of carbon sources like various organic acids, hexose and also pentose sugars. Hence, the biotechnological application of these microorganisms can cover many aspects, such as the treatment of hypersaline waste streams of different origin. Due to the fact that the high osmotic pressure of hypersaline environments reduces the risk of contamination, the capacity for cost-effective non-sterile cultivation can make extreme halophilic microorganisms potentially valuable organisms for biotechnological applications. In this contribution, the stepwise use of screening approaches, employing design of experiment (DoE) on model media and subsequently using industrial waste as substrate have been implemented to investigate the applicability of halophiles to generate PHB from the industrial waste stream spent sulfite liquor (SSL). The production of PHB on model media as well as dilutions of industrial substrate in a complex medium has been screened for by fluorescence microscopy using Nile Blue staining. Screening was used to investigate the ability of halophilic microorganisms to withstand the inhibiting substances of the waste stream without negatively affecting PHB production. It could be shown that neither single inhibiting substances nor a mixture thereof inhibited growth in the investigated range, hence, leaving the question on the inhibiting mechanisms open. However, it could be demonstrated that some haloarchaea and halophilic bacteria are able to produce PHB when cultivated on 3.3% w/w dry matter spent sulfite liquor, whereas H. halophila was even able to thrive on 6.6% w/w dry matter spent sulfite liquor and still produce PHB. PMID:27682089

  15. Clarification of Orange Press Liquors by PVDF Hollow Fiber Membranes.

    PubMed

    Simone, Silvia; Conidi, Carmela; Ursino, Claudia; Cassano, Alfredo; Figoli, Alberto

    2016-01-01

    Press liquors are typical by-products of the citrus juice processing characterized by a high content of organic compounds and associated problems of environmental impact, which imply high treatment costs. However, these wastes contain a great number of health promoting substances, including fibers, carotenoids and phenolic compounds (mainly flavonoids), whose recovery against waste-destruction technologies is very attractive for new business opportunities. In this work, the clarification of orange press liquor by using microfiltration (MF) membranes is studied as a preliminary step to obtain a permeate stream enriched in antioxidant compounds which can be further processed to produce extracts of nutraceutical and/or pharmaceutical interest. MF poly(vinylidene fluoride) (PVDF) hollow fibers were prepared by the dry/wet spinning technique. A series of fibers was produced from the same polymeric dope, in order to investigate the effect of selected spinning parameters, i.e., bore fluid composition and flowrate, on their properties. The morphology of the produced fibers was analyzed by Scanning Electron Microscopy (SEM). Fibers were further characterized for their mechanical properties, porosity, bubble point, pore size distribution and pure water permeability (PWP). Some of the produced fibers exhibited high permeability (pure water permeability ~530 L/m²·h·bar), coupled to good mechanical resistance and pore size in the range of MF membranes. These fibers were selected and used for the clarification of press liquor from orange peel processing. In optimized operating conditions, the selected fibers produced steady-state fluxes of about 41 L/m²·h with rejections towards polyphenols and total antioxidant activity of 4.1% and 1.4%, respectively. PMID:26805899

  16. 46 CFR 108.707 - First aid kit.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false First aid kit. 108.707 Section 108.707 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Miscellaneous Equipment § 108.707 First aid kit. Each unit must have a first-aid kit approved by the Mine...

  17. 46 CFR 169.725 - First aid kit.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false First aid kit. 169.725 Section 169.725 Shipping COAST... Control, Miscellaneous Systems, and Equipment § 169.725 First aid kit. Each vessel must carry an approved first aid kit, constructed and fitted in accordance with subpart 160.041 of this chapter....

  18. 33 CFR 144.01-30 - First-aid kit.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false First-aid kit. 144.01-30 Section...) OUTER CONTINENTAL SHELF ACTIVITIES LIFESAVING APPLIANCES Manned Platforms § 144.01-30 First-aid kit. On each manned platform a first-aid kit approved by the Commandant or the U.S. Bureau of Mines shall...

  19. 21 CFR 864.2260 - Chromosome culture kit.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Chromosome culture kit. 864.2260 Section 864.2260...) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Cell And Tissue Culture Products § 864.2260 Chromosome culture kit. (a) Identification. A chromosome culture kit is a device containing the necessary...

  20. 21 CFR 864.2260 - Chromosome culture kit.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Chromosome culture kit. 864.2260 Section 864.2260...) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Cell And Tissue Culture Products § 864.2260 Chromosome culture kit. (a) Identification. A chromosome culture kit is a device containing the necessary...

  1. 21 CFR 864.2260 - Chromosome culture kit.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Chromosome culture kit. 864.2260 Section 864.2260...) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Cell And Tissue Culture Products § 864.2260 Chromosome culture kit. (a) Identification. A chromosome culture kit is a device containing the necessary...

  2. 21 CFR 864.2260 - Chromosome culture kit.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Chromosome culture kit. 864.2260 Section 864.2260...) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Cell And Tissue Culture Products § 864.2260 Chromosome culture kit. (a) Identification. A chromosome culture kit is a device containing the necessary...

  3. 21 CFR 864.2260 - Chromosome culture kit.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Chromosome culture kit. 864.2260 Section 864.2260...) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Cell And Tissue Culture Products § 864.2260 Chromosome culture kit. (a) Identification. A chromosome culture kit is a device containing the necessary...

  4. 21 CFR 868.5140 - Anesthesia conduction kit.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Anesthesia conduction kit. 868.5140 Section 868...) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5140 Anesthesia conduction kit. (a) Identification. An anesthesia conduction kit is a device used to administer to a patient conduction, regional,...

  5. 21 CFR 868.5140 - Anesthesia conduction kit.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Anesthesia conduction kit. 868.5140 Section 868...) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5140 Anesthesia conduction kit. (a) Identification. An anesthesia conduction kit is a device used to administer to a patient conduction, regional,...

  6. 21 CFR 880.5760 - Chemical cold pack snakebite kit.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Chemical cold pack snakebite kit. 880.5760 Section... Therapeutic Devices § 880.5760 Chemical cold pack snakebite kit. (a) Identification. A chemical cold pack snakebit kit is a device consisting of a chemical cold pack and tourniquet used for first-aid treatment...

  7. 21 CFR 880.5760 - Chemical cold pack snakebite kit.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Chemical cold pack snakebite kit. 880.5760 Section... Therapeutic Devices § 880.5760 Chemical cold pack snakebite kit. (a) Identification. A chemical cold pack snakebit kit is a device consisting of a chemical cold pack and tourniquet used for first-aid treatment...

  8. 21 CFR 880.5760 - Chemical cold pack snakebite kit.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Chemical cold pack snakebite kit. 880.5760 Section... Therapeutic Devices § 880.5760 Chemical cold pack snakebite kit. (a) Identification. A chemical cold pack snakebit kit is a device consisting of a chemical cold pack and tourniquet used for first-aid treatment...

  9. 21 CFR 880.5760 - Chemical cold pack snakebite kit.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Chemical cold pack snakebite kit. 880.5760 Section... Therapeutic Devices § 880.5760 Chemical cold pack snakebite kit. (a) Identification. A chemical cold pack snakebit kit is a device consisting of a chemical cold pack and tourniquet used for first-aid treatment...

  10. 21 CFR 880.5760 - Chemical cold pack snakebite kit.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Chemical cold pack snakebite kit. 880.5760 Section... Therapeutic Devices § 880.5760 Chemical cold pack snakebite kit. (a) Identification. A chemical cold pack snakebit kit is a device consisting of a chemical cold pack and tourniquet used for first-aid treatment...

  11. 21 CFR 878.3925 - Plastic surgery kit and accessories.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Plastic surgery kit and accessories. 878.3925... (CONTINUED) MEDICAL DEVICES GENERAL AND PLASTIC SURGERY DEVICES Prosthetic Devices § 878.3925 Plastic surgery kit and accessories. (a) Identification. A plastic surgery kit and accessories is a device intended...

  12. 21 CFR 878.3925 - Plastic surgery kit and accessories.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Plastic surgery kit and accessories. 878.3925... (CONTINUED) MEDICAL DEVICES GENERAL AND PLASTIC SURGERY DEVICES Prosthetic Devices § 878.3925 Plastic surgery kit and accessories. (a) Identification. A plastic surgery kit and accessories is a device intended...

  13. 21 CFR 878.3925 - Plastic surgery kit and accessories.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Plastic surgery kit and accessories. 878.3925... (CONTINUED) MEDICAL DEVICES GENERAL AND PLASTIC SURGERY DEVICES Prosthetic Devices § 878.3925 Plastic surgery kit and accessories. (a) Identification. A plastic surgery kit and accessories is a device intended...

  14. 21 CFR 878.3925 - Plastic surgery kit and accessories.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Plastic surgery kit and accessories. 878.3925... (CONTINUED) MEDICAL DEVICES GENERAL AND PLASTIC SURGERY DEVICES Prosthetic Devices § 878.3925 Plastic surgery kit and accessories. (a) Identification. A plastic surgery kit and accessories is a device intended...

  15. 21 CFR 878.3925 - Plastic surgery kit and accessories.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Plastic surgery kit and accessories. 878.3925... (CONTINUED) MEDICAL DEVICES GENERAL AND PLASTIC SURGERY DEVICES Prosthetic Devices § 878.3925 Plastic surgery kit and accessories. (a) Identification. A plastic surgery kit and accessories is a device intended...

  16. 21 CFR 870.1350 - Catheter balloon repair kit.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Catheter balloon repair kit. 870.1350 Section 870... repair kit. (a) Identification. A catheter balloon repair kit is a device used to repair or replace the... effect the repair or replacement. (b) Classification. Class III (premarket approval). (c) Date PMA...

  17. Working with Self-Injurious Adolescents Using the Safe Kit

    ERIC Educational Resources Information Center

    Moyer, Michael

    2008-01-01

    This article offers a guide for using the Safe Kit when working with clients who self-injure. The Safe Kit can be used as a supplement to more traditional approaches to counseling and offers clients alternatives to self-injury when they need alternatives the most. The Safe Kit works under the assumption that individuals differ in the meaning they…

  18. 33 CFR 144.01-30 - First-aid kit.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false First-aid kit. 144.01-30 Section...) OUTER CONTINENTAL SHELF ACTIVITIES LIFESAVING APPLIANCES Manned Platforms § 144.01-30 First-aid kit. On each manned platform a first-aid kit approved by the Commandant or the U.S. Bureau of Mines shall...

  19. 46 CFR 169.725 - First aid kit.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false First aid kit. 169.725 Section 169.725 Shipping COAST... Control, Miscellaneous Systems, and Equipment § 169.725 First aid kit. Each vessel must carry an approved first aid kit, constructed and fitted in accordance with subpart 160.041 of this chapter....

  20. 46 CFR 169.725 - First aid kit.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false First aid kit. 169.725 Section 169.725 Shipping COAST... Control, Miscellaneous Systems, and Equipment § 169.725 First aid kit. Each vessel must carry an approved first aid kit, constructed and fitted in accordance with subpart 160.041 of this chapter....

  1. 46 CFR 108.707 - First aid kit.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false First aid kit. 108.707 Section 108.707 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Miscellaneous Equipment § 108.707 First aid kit. Each unit must have a first-aid kit approved by the Mine...

  2. 46 CFR 108.707 - First aid kit.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false First aid kit. 108.707 Section 108.707 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Miscellaneous Equipment § 108.707 First aid kit. Each unit must have a first-aid kit approved by the Mine...

  3. 46 CFR 108.707 - First aid kit.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false First aid kit. 108.707 Section 108.707 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Miscellaneous Equipment § 108.707 First aid kit. Each unit must have a first-aid kit approved by the Mine...

  4. 33 CFR 144.01-30 - First-aid kit.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false First-aid kit. 144.01-30 Section...) OUTER CONTINENTAL SHELF ACTIVITIES LIFESAVING APPLIANCES Manned Platforms § 144.01-30 First-aid kit. On each manned platform a first-aid kit approved by the Commandant or the U.S. Bureau of Mines shall...

  5. 46 CFR 169.725 - First aid kit.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false First aid kit. 169.725 Section 169.725 Shipping COAST... Control, Miscellaneous Systems, and Equipment § 169.725 First aid kit. Each vessel must carry an approved first aid kit, constructed and fitted in accordance with subpart 160.041 of this chapter....

  6. 46 CFR 108.707 - First aid kit.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false First aid kit. 108.707 Section 108.707 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Miscellaneous Equipment § 108.707 First aid kit. Each unit must have a first-aid kit approved by the Mine...

  7. 33 CFR 144.01-30 - First-aid kit.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false First-aid kit. 144.01-30 Section...) OUTER CONTINENTAL SHELF ACTIVITIES LIFESAVING APPLIANCES Manned Platforms § 144.01-30 First-aid kit. On each manned platform a first-aid kit approved by the Commandant or the U.S. Bureau of Mines shall...

  8. 46 CFR 169.725 - First aid kit.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false First aid kit. 169.725 Section 169.725 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Vessel Control, Miscellaneous Systems, and Equipment § 169.725 First aid kit. Each vessel must carry an approved first aid kit, constructed and fitted...

  9. Home Pregnancy Test Kits: How Readable Are the Instructions?

    ERIC Educational Resources Information Center

    Holcomb, Carol Ann

    At the conclusion of their study on home pregnancy test kits, Valinas and Perlman (1982) suggested that the instructions accompanying the kits be revised to make them easier to read. A study was undertaken to determine the readability of the printed instructions accompanying five home pregnancy test kits (Daisy II, Answer, Acu-Test, Predictor, and…

  10. A critical exponent of an aniseed-based liquor

    NASA Astrophysics Data System (ADS)

    Mayorga, A.; Thompson, D.

    1996-05-01

    We present the results of a simple experiment suitable for the undergraduate laboratory in which the onset of turbidity when an aniseed-based liquor is diluted with water is observed. The optical transmission shows the behavior typical of the order parameter in a second-order phase transition. The changes in the transmission are due to the precipitation of terpenes and the amount of precipitated terpenes also shows critical behavior of the form n=k'(c-cc)y, where c is the fraction of water in the solution. The critical exponent is determined to be y=1.01±0.06.

  11. Rapid identification of Chinese Sauce liquor from different fermentation positions with FT-IR spectroscopy

    NASA Astrophysics Data System (ADS)

    Li, Changwen; Wei, Jiping; Zhou, Qun; Sun, Suqin

    2008-07-01

    FT-IR and two-dimensional correlation spectroscopy (2D-IR) technology were applied to discriminate Chinese Sauce liquor from different fermentation positions (top, middle and bottom of fermentation cellar) for the first time. The liquors at top, middle and bottom of fermentation cellar, possessed the characteristic peaks at 1731 cm -1, 1733 cm -1 and 1602 cm -1, respectively. In the 2D correlation infrared spectra, the differences were amplified. A strong auto-peak at 1725 cm -1 showed in the 2D spectra of the Top Liquor, which indicated that the liquor might contain some ester compounds. Different from Top Liquor, three auto-peaks at 1695, 1590 and 1480 cm -1 were identified in 2D spectra of Middle Liquor, which were the characteristic absorption of acid, lactate. In 2D spectra of Bottom Liquor, two auto-peaks at 1570 and 1485 cm -1 indicated that lactate was the major component. As a result, FT-IR and 2D-IR correlation spectra technology provided a rapid and effective method for the quality analysis of the Sauce liquor.

  12. Discrimination between authentic and adulterated liquors by near-infrared spectroscopy and ensemble classification

    NASA Astrophysics Data System (ADS)

    Chen, Hui; Tan, Chao; Wu, Tong; Wang, Li; Zhu, Wanping

    2014-09-01

    Chinese liquor is one of the famous distilled spirits and counterfeit liquor is becoming a serious problem in the market. Especially, age liquor is facing the crisis of confidence because it is difficult for consumer to identify the marked age, which prompts unscrupulous traders to pose off low-grade liquors as high-grade liquors. An ideal method for authenticity confirmation of liquors should be non-invasive, non-destructive and timely. The combination of near-infrared spectroscopy with chemometrics proves to be a good way to reach these premises. A new strategy is proposed for classification and verification of the adulteration of liquors by using NIR spectroscopy and chemometric classification, i.e., ensemble support vector machines (SVM). Three measures, i.e., accuracy, sensitivity and specificity were used for performance evaluation. The results confirmed that the strategy can serve as a screening tool applied to verify adulteration of the liquor, that is, a prior step used to condition the sample to a deeper analysis only when a positive result for adulteration is obtained by the proposed methodology.

  13. 77 FR 10551 - Confederated Tribes of the Umatilla Indian Reservation-Amendment to Liquor Code

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-22

    ... four varieties of liquor herein defined (alcohol, spirits, wine, and beer) and all fermented... substance patented or not containing alcohol, spirits, wine, or beer, and all drinks of potable liquids and... distribution by any means whatsoever, of liquor or any liquid known or described as beer or by any...

  14. 27 CFR 31.163 - Requirements when a wholesale dealer in liquors maintains a retail department.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... wholesale dealer in liquors maintains a retail department. 31.163 Section 31.163 Alcohol, Tobacco Products... wholesale dealer in liquors maintains a retail department. (a) Constructive receipt and sale. When a... spirits, and the retail sales of distilled spirits normally represent 90 percent or more of the volume...

  15. 19 CFR 11.6 - Distilled spirits, wines, and malt liquors in bulk.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Distilled spirits, wines, and malt liquors in bulk...; DEPARTMENT OF THE TREASURY PACKING AND STAMPING; MARKING Packing and Stamping § 11.6 Distilled spirits, wines... conveying imported distilled spirits, wines, and malt liquors, in accordance with 19 U.S.C. 467. (b)...

  16. Male Readership Differences in Liquor Magazine Ads Employing Nonsensical and Sexual Humor.

    ERIC Educational Resources Information Center

    Reid, Leonard N.; And Others

    A study examined the attention getting value of nonsensical and sexual humor used in liquor advertisements to determine if one was more effective than the other in attracting male magazine readers. Thirty-two Starch-scored liquor ads taken from 1976 and 1977 issues of "Time,""Newsweek," and "Sports Illustrated" were analyzed by three male readers.…

  17. Vapor pressure and boiling point elevation of slash pine black liquors: Predictive models with statistical approach

    SciTech Connect

    Zaman, A.A.; McNally, T.W.; Fricke, A.L.

    1998-01-01

    Vapor-liquid equilibria and boiling point elevation of slash pine kraft black liquors over a wide range of solid concentrations (up to 85% solids) has been studied. The liquors are from a statistically designed pulping experiment for pulping slash pine in a pilot scale digester with four cooking variables of effective alkali, sulfidity, cooking time, and cooking temperature. It was found that boiling point elevation of black liquors is pressure dependent, and this dependency is more significant at higher solids concentrations. The boiling point elevation data at different solids contents (at a fixed pressure) were correlated to the dissolved solids (S/(1 {minus} S)) in black liquor. Due to the solubility limit of some of the salts in black liquor, a change in the slope of the boiling point elevation as a function of the dissolved solids was observed at a concentration of around 65% solids. An empirical method was developed to describe the boiling point elevation of each liquor as a function of pressure and solids mass fraction. The boiling point elevation of slash pine black liquors was correlated quantitatively to the pulping variables, using different statistical procedures. These predictive models can be applied to determine the boiling point rise (and boiling point) of slash pine black liquors at processing conditions from the knowledge of pulping variables. The results are presented, and their utility is discussed.

  18. [Identification of Kweichow Moutai liquor by gas chromatography-mass spectrometry fingerprint].

    PubMed

    Sun, Qiran; Xiang, Ping; Shen, Baohua; Shen, Min

    2010-09-01

    The fingerprint of Kweichow Moutai liquor was established by gas chromatography-mass spectrometry (GC-MS) and the similarity of fingerprints was evaluated by the fingerprint similarity calculation software designed by Zhejiang University based on included angle cosine. One milliliter of liquor sample was mixed with ten microliter of 2% n-pentyl acetate solution used as internal standard. One microliter of the prepared sample was injected into a GC-MS. The separation was performed on an HP-INNOWAX 19091N-113 capillary column. The precision and repeatability of the method were good as the relative standard deviation (RSD) of intrabatch was less than 5%. A total of 35 characteristic components of Kweichow Moutai liquor were identified. The fingerprints of 38 batches of Kweichow Moutai, 5 Moutai-flavor liquors produced by Kweichow Moutai Company Limited, the same manufacturer as Kweichow Moutai, and 12 other brand liquors were compared in characteristic components and similarity. The results demonstrated that different batches of Kweichow Moutai had good similarity (> or = 0.9), and Kweichow Moutai was differentiated from the liquors of different alcohol contents and flavors, but it was poorly distinguished from the Moutai-flavor liquors by fingerprint similarity calculation software. Therefore, only in combining characteristic components and fingerprint similarity results, Kweichow Moutai can be distinguished from other liquors. The established method offers technical basis for the identification of Kweichow Moutai. PMID:21171278

  19. Synthesis of M-type hexaferrites from steel pickling liquors (ID 109)

    NASA Astrophysics Data System (ADS)

    Dufour, J.; Latorre, R.; Alcalá, E. M.; Negro, C.; Formoso, A.; López-Mateos, F.

    1996-05-01

    The recovery of steel pickling liquors is one of the main environmental aspects that the steelmaking industry must resolve. We propose the synthesis of barium M-type hexaferrite from these liquors as a recovery treatment. Two methods of synthesis have been studied: a variation of the ceramic method, and an oxicoprecipitation process. Products with excellent magnetic properties have been obtained.

  20. Discrimination of Chinese Sauce liquor using FT-IR and two-dimensional correlation IR spectroscopy

    NASA Astrophysics Data System (ADS)

    Sun, Su-Qin; Li, Chang-Wen; Wei, Ji-Ping; Zhou, Qun; Noda, Isao

    2006-11-01

    We applied the three-step IR macro-fingerprint identification method to obtain the IR characteristic fingerprints of so-called Chinese Sauce liquor (Moutai liquor and Kinsly liquor) and a counterfeit Moutai. These fingerprints can be used for the identification and discrimination of similar liquor products. The comparison of their conventional IR spectra, as the first step of identification, shows that the primary difference in Sauce liquor is the intensity of characteristic peaks at 1592 and 1225 cm -1. The comparison of the second derivative IR spectra, as the second step of identification, shows that the characteristic absorption in 1400-1800 cm -1 is substantially different. The comparison of 2D-IR correlation spectra, as the third and final step of identification, can discriminate the liquors from another direction. Furthermore, the method was successfully applied to the discrimination of a counterfeit Moutai from the genuine Sauce liquor. The success of the three-step IR macro-fingerprint identification to provide a rapid and effective method for the identification of Chinese liquor suggests the potential extension of this technique to the identification and discrimination of other wine and spirits, as well.

  1. 27 CFR 31.67 - Persons returning liquors for credit, refund, or exchange.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Persons returning liquors for credit, refund, or exchange. 31.67 Section 31.67 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS ALCOHOL BEVERAGE DEALERS Exemptions and Exceptions Persons Who Are Not Dealers...

  2. Optimizing Medical Kits for Space Flight

    NASA Technical Reports Server (NTRS)

    Minard, Charles G.; FreiredeCarvalho, Mary H.; Iyengar, M. Sriram

    2010-01-01

    The Integrated Medical Model (IMM) uses Monte Carlo methodologies to predict the occurrence of medical events, their mitigation, and the resources required during space flight. The model includes two modules that utilize output from a single model simulation to identify an optimized medical kit for a specified mission scenario. This poster describes two flexible optimization routines built into SAS 9.1. The first routine utilizes a systematic process of elimination to maximize (or minimize) outcomes subject to attribute constraints. The second routine uses a search and mutate approach to minimize medical kit attributes given a set of outcome constraints. There are currently 273 unique resources identified that are used to treat at least one of 83 medical conditions currently in the model.

  3. Decontaminating breast pump kits: new guidance.

    PubMed

    Oxtoby, Kathy

    Various methods can be used to decontaminate breast pump milk collection kits and items related to infant feeding but they have some drawbacks and risks. In 2015, the Joint Working Group of the Healthcare Infection Society and Infection Prevention Society published guidance to support the safe decontamination of this equipment at home and in hospital. This article summarises its recommendations for health professionals to use and communicate to other groups, such as parents and carers. PMID:27400623

  4. Sample rotating turntable kit for infrared spectrometers

    DOEpatents

    Eckels, Joel Del; Klunder, Gregory L.

    2008-03-04

    An infrared spectrometer sample rotating turntable kit has a rotatable sample cup containing the sample. The infrared spectrometer has an infrared spectrometer probe for analyzing the sample and the rotatable sample cup is adapted to receive the infrared spectrometer probe. A reflectance standard is located in the rotatable sample cup. A sleeve is positioned proximate the sample cup and adapted to receive the probe. A rotator rotates the rotatable sample cup. A battery is connected to the rotator.

  5. Shuttle orbiter TPS flight repair kit development

    NASA Technical Reports Server (NTRS)

    1979-01-01

    The design and application of a TPS repair kit is presented. The repair kit is designed for on orbit use by a crew member working in the manned maneuvering unit (MMU). The kit includes the necessary equipment and materials to accomplish the repair tasks which include the following: HRSI emittance coating repair, damaged tile repair, missing tile repair, and multiple tile repair. Two types of repair materials required to do the small area repair and the large area repair are described. The materials area cure in place, silicone base ablator for small damaged areas and precured ablator tile for repair of larger damaged areas is examined. The cure in place ablator is also used as an adhesive to bond the precured tiles in place. An applicator for the cure in place ablator, designed to contain a two-part silicon compound, mix the two components at correct ratio, and dispense the materials at rates compatible with mission timelines established for the EVA is described.

  6. Raptors and aircraft

    USGS Publications Warehouse

    Smith, D.G.; Ellis, D.H.; Johnson, T.H.; Glinski, Richard L.; Pendleton, Beth Giron; Moss, Mary Beth; LeFranc, Maurice N.=; Millsap, Brian A.; Hoffman, Stephen W.

    1988-01-01

    Less than 5% of all bird strikes of aircraft are by raptor species, but damage to airframe structure or jet engine dysfunction are likely consequences. Beneficial aircraft-raptor interactions include the use of raptor species to frighten unwanted birds from airport areas and the use of aircraft to census raptor species. Many interactions, however, modify the raptor?s immediate behavior and some may decrease reproduction of sensitive species. Raptors may respond to aircraft stimuli by exhibiting alarm, increased heart rate, flushing or fleeing and occasionally by directly attacking intruding aircraft. To date, most studies reveal that raptor responses to aircraft are brief and do not limit reproduction; however, additional study is needed.

  7. Consumption of Alcoholic Beverages and Liquor Consumption by Michigan High School Students, 2011

    PubMed Central

    Gonzales, Katherine R.; Largo, Thomas W.; Miller, Corinne; Brewer, Robert D.

    2015-01-01

    Introduction Excessive alcohol consumption was responsible for approximately 4,300 annual deaths in the United States among people younger than 21 from 2006 through 2010. Underage drinking cost the United States $24.6 billion in 2006. Previous studies have shown that liquor is the most common type of alcohol consumed by high school students. However, little is known about the types of liquor consumed by youth or about the mixing of alcohol with energy drinks. Methods The 2011 Michigan Youth Tobacco Survey was used to assess usual alcohol beverage consumption and liquor consumption and the mixing of alcohol with energy drinks by Michigan high school students. Beverage preferences were analyzed by demographic characteristics and drinking patterns. Results Overall, 34.2% of Michigan high school students consumed alcohol in the past month, and 20.8% reported binge drinking. Among current drinkers, liquor was the most common type of alcohol consumed (51.2%), and vodka was the most prevalent type of liquor consumed by those who drank liquor (53.0%). The prevalence of liquor consumption was similar among binge drinkers and nonbinge drinkers, but binge drinkers who drank liquor were significantly more likely than nonbinge drinkers to consume vodka and to mix alcohol with energy drinks (49.0% vs 18.2%, respectively). Conclusions Liquor is the most common type of alcoholic beverage consumed by Michigan high school students; vodka is the most common type of liquor consumed. Mixing alcohol and energy drinks is common, particularly among binge drinkers. Community Guide strategies for reducing excessive drinking (eg, increasing alcohol taxes) can reduce underage drinking. PMID:26564010

  8. Biomass production and nutrient removal by Chlorella sp. as affected by sludge liquor concentration.

    PubMed

    Åkerström, Anette M; Mortensen, Leiv M; Rusten, Bjørn; Gislerød, Hans Ragnar

    2014-11-01

    The use of microalgae for biomass production and nutrient removal from the reject water produced in the dewatering process of anaerobically digested sludge, sludge liquor, was investigated. The sludge liquor was characterized by a high content of total suspended solids (1590 mg L(-1)), a high nitrogen concentration (1210 mg L(-1)), and a low phosphorus concentration (28 mg L(-1)). Chlorella sp. was grown in sludge liquor diluted with wastewater treatment plant effluent water to different concentrations (12, 25, 40, 50, 70, and 100%) using batch mode. The environmental conditions were 25 °C, a continuous lightning of 115 μmol m(-2) s(-1), and a CO2 concentration of 3.0%. The highest biomass production (0.42-0.45 g dry weight L(-1) Day(-1)) was achieved at 40-50% sludge liquor, which was comparable to the production of the control culture grown with an artificial fertilizer. The biomass production was 0.12 and 0.26 g dry weight L(-1) Day(-1) at 12% and 100% sludge liquor, respectively. The percentage of nitrogen in the algal biomass increased from 3.6% in 12% sludge liquor and reached a saturation of ∼10% in concentrations with 50% sludge liquor and higher. The phosphorus content in the biomass increased linearly from 0.2 to 1.5% with increasing sludge liquor concentrations. The highest nitrogen removal rates by algal biosynthesis were 33.6-42.6 mg TN L(-1) Day(-1) at 40-70% sludge liquor, while the highest phosphorus removal rates were 3.1-4.1 mg TP L(-1) Day(-1) at 50-100% sludge liquor. PMID:24935023

  9. Characterization of geosmin as source of earthy odor in different aroma type Chinese liquors.

    PubMed

    Du, Hai; Fan, Wenlai; Xu, Yan

    2011-08-10

    Earthy odor is one of the most frequent and serious causes for the aroma deterioration in Chinese liquor, which causes a dirty and dusty impression. The odor in Chinese liquor is similar to that of rice husk, one kind of auxiliary material widely used as a filler in the distillation process. So it is experientially hypothesized that such odor may derive from rice husk. In this paper, the gas chromatography-olfactometry (GC-O) technique and gas chromatography-mass spectrometry (GC-MS) were used to discover and identify the characteristic odoriferous zone of Chinese liquor marked by earthy odor. Geosmin was found to be responsible for this odor. The levels of the compound in ten bottled liquors and thirty liquors aging for different years belonging to four different aroma types were determined by the optimized headspace-solid phase microextraction-gas chromatography-mass spectrometry (HS-SPME-GC-MS) method. Quantitative analysis of bottled liquor revealed the presence of geosmin in all aroma type liquors with concentrations ranging from 1.10 μg/L to 9.90 μg/L, except for strong-aroma type liquor. Meanwhile in the aged liquors belonging to the same aroma type, geosmin was detected with significant concentrations and high odor activity values (OAVs) during different years of aging. However, geosmin was not detected in steamed rice husk nor in nonsteamed rice husk, which suggests that rice husk is not the origin of earthy odor in Chinese liquor, and there may be another origin of it during the brewing process.

  10. Lightning effects on aircraft

    NASA Technical Reports Server (NTRS)

    1977-01-01

    Direct and indirect effects of lightning on aircraft were examined in relation to aircraft design. Specific trends in design leading to more frequent lightning strikes were individually investigated. These trends included the increasing use of miniaturized, solid state components in aircraft electronics and electric power systems. A second trend studied was the increasing use of reinforced plastics and other nonconducting materials in place of aluminum skins, a practice that reduces the electromagnetic shielding furnished by a conductive skin.

  11. 27 CFR 31.52 - Wholesale dealers in liquors consummating sales of wines or beer at premises of other dealers.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... liquors consummating sales of wines or beer at premises of other dealers. 31.52 Section 31.52 Alcohol... § 31.52 Wholesale dealers in liquors consummating sales of wines or beer at premises of other dealers... wholesale dealer on account of those sales. (b) Sales of beer. Any wholesale dealer in liquors who...

  12. 27 CFR 31.52 - Wholesale dealers in liquors consummating sales of wines or beer at premises of other dealers.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... liquors consummating sales of wines or beer at premises of other dealers. 31.52 Section 31.52 Alcohol... § 31.52 Wholesale dealers in liquors consummating sales of wines or beer at premises of other dealers... wholesale dealer on account of those sales. (b) Sales of beer. Any wholesale dealer in liquors who...

  13. 27 CFR 31.52 - Wholesale dealers in liquors consummating sales of wines or beer at premises of other dealers.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... liquors consummating sales of wines or beer at premises of other dealers. 31.52 Section 31.52 Alcohol... § 31.52 Wholesale dealers in liquors consummating sales of wines or beer at premises of other dealers... wholesale dealer on account of those sales. (b) Sales of beer. Any wholesale dealer in liquors who...

  14. 27 CFR 31.52 - Wholesale dealers in liquors consummating sales of wines or beer at premises of other dealers.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... liquors consummating sales of wines or beer at premises of other dealers. 31.52 Section 31.52 Alcohol... § 31.52 Wholesale dealers in liquors consummating sales of wines or beer at premises of other dealers... wholesale dealer on account of those sales. (b) Sales of beer. Any wholesale dealer in liquors who...

  15. 27 CFR 31.52 - Wholesale dealers in liquors consummating sales of wines or beer at premises of other dealers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... liquors consummating sales of wines or beer at premises of other dealers. 31.52 Section 31.52 Alcohol... § 31.52 Wholesale dealers in liquors consummating sales of wines or beer at premises of other dealers... wholesale dealer on account of those sales. (b) Sales of beer. Any wholesale dealer in liquors who...

  16. A comprehensive program to develop correlations for the physical properties of kraft black liquors. Interim report No.3

    SciTech Connect

    Fricke, A.L.; Dong, D.J.; Schmidl, G.W.; Stoy, M.A.; Zaman, A.A.

    1993-09-01

    The black liquor properties program has conducted a systematic collection data of properties, liquor composition, and lignin characteristics. Complete data, except for some density data, has been collected for Slash Pine black liquors made by experimental pulping at a total of 25 different pulping conditions that cover the entire range used for commercial pulping. In addition, complete data has been collected for some mill liquors and partial properties or composition data has been collected on Slash Pine black liquors made at 16 different pulping conditions and some mill liquors. Data reduction methods have been developed or extended for correlation of viscosity, heat capacity, heat of dilution, and density. Correlation of properties to pulping conditions and of composition to pulping conditions has begun. In most cases, data reduction methods have been developed that are fundamentally based and that have been shown to be generally applicable to all black liquors. While it has not proven to be possible to include research for comprehensive correlations for properties for liquors from other species, we have shown that the behavior of liquors made from other species is similar to that which has been explored extensively for Slash Pine liquors. This report reviews the methods used, describes examples of data reduction methods that have been developed, and presents some preliminary results for correlation of liquor composition and properties to pulping conditions for Slash Pine black liquors.

  17. Aircraft fire safety research

    NASA Technical Reports Server (NTRS)

    Botteri, Benito P.

    1987-01-01

    During the past 15 years, very significant progress has been made toward enhancing aircraft fire safety in both normal and hostile (combat) operational environments. Most of the major aspects of the aircraft fire safety problem are touched upon here. The technology of aircraft fire protection, although not directly applicable in all cases to spacecraft fire scenarios, nevertheless does provide a solid foundation to build upon. This is particularly true of the extensive research and testing pertaining to aircraft interior fire safety and to onboard inert gas generation systems, both of which are still active areas of investigation.

  18. Hypersonic aircraft design

    NASA Technical Reports Server (NTRS)

    Alkamhawi, Hani; Greiner, Tom; Fuerst, Gerry; Luich, Shawn; Stonebraker, Bob; Wray, Todd

    1990-01-01

    A hypersonic aircraft is designed which uses scramjets to accelerate from Mach 6 to Mach 10 and sustain that speed for two minutes. Different propulsion systems were considered and it was decided that the aircraft would use one full scale turbofan-ramjet. Two solid rocket boosters were added to save fuel and help the aircraft pass through the transonic region. After considering aerodynamics, aircraft design, stability and control, cooling systems, mission profile, and landing systems, a conventional aircraft configuration was chosen over that of a waverider. The conventional design was chosen due to its landing characteristics and the relative expense compared to the waverider. Fuel requirements and the integration of the engine systems and their inlets are also taken into consideration in the final design. A hypersonic aircraft was designed which uses scramjets to accelerate from Mach 6 to Mach 10 and sustain that speed for two minutes. Different propulsion systems were considered and a full scale turbofan-ramjet was chosen. Two solid rocket boosters were added to save fuel and help the aircraft pass through the transonic reqion. After the aerodynamics, aircraft design, stability and control, cooling systems, mission profile, landing systems, and their physical interactions were considered, a conventional aircraft configuration was chosen over that of a waverider. The conventional design was chosen due to its landing characteristics and the relative expense compared to the waverider. Fuel requirements and the integration of the engine systems and their inlets were also considered in the designing process.

  19. A survival Kit for pancreatic beta cells: stem cell factor and c-Kit receptor tyrosine kinase.

    PubMed

    Feng, Zhi-Chao; Riopel, Matthew; Popell, Alex; Wang, Rennian

    2015-04-01

    The interactions between c-Kit and its ligand, stem cell factor (SCF), play an important role in haematopoiesis, pigmentation and gametogenesis. c-Kit is also found in the pancreas, and recent studies have revealed that c-Kit marks a subpopulation of highly proliferative pancreatic endocrine cells that may harbour islet precursors. c-Kit governs and maintains pancreatic endocrine cell maturation and function via multiple signalling pathways. In this review we address the importance of c-Kit signalling within the pancreas, including its profound role in islet morphogenesis, islet vascularisation, and beta cell survival and function. We also discuss the impact of c-Kit signalling in pancreatic disease and the use of c-Kit as a potential target for the development of cell-based and novel drug therapies in the treatment of diabetes.

  20. Human Factors In Aircraft Automation

    NASA Technical Reports Server (NTRS)

    Billings, Charles

    1995-01-01

    Report presents survey of state of art in human factors in automation of aircraft operation. Presents examination of aircraft automation and effects on flight crews in relation to human error and aircraft accidents.

  1. Comparison of commercial kits for detection of cryptococcal antigen.

    PubMed Central

    Tanner, D C; Weinstein, M P; Fedorciw, B; Joho, K L; Thorpe, J J; Reller, L

    1994-01-01

    Although kits to detect cryptococcal antigen are used widely to diagnose cryptococcal infection, the comparative performance of commercially available assays has not been evaluated in the past decade. Therefore, we compared the sensitives and specificities of five commercially available kits for detecting cryptococcal antigen (four latex agglutination test kits--Calas [Meridian Diagnostics])--Crypto-LA [International Biological Labs], Myco-Immune [MicroScan], and Immy [Immunomycologics]--and an enzyme immunoassay kit, Premier [Meridian Diagnostics]) with culture for the diagnosis of cryptococcal meningitis and fungemia. Of 182 cerebrospinal fluid (CSF) and 90 serum samples submitted for cryptococcal antigen and fungal culture, 49 (19 and 30 samples, respectively) from 20 patients had a culture positive for Cryptococcus neoformans. For CSF specimens, the sensitivities and specificities of all kits were comparable (sensitivity, 93 to 100%; specificity, 93 to 98%). There was a significant difference in sensitivities of the kits when serum samples were tested with the International Biological Labs and MicroScan kits, which do not pretreat serum with pronase. These kits were less sensitive (sensitivity, 83%) than the Immy and Meridian latex kits (sensitivity, 97%), which do pretreat with pronase. The sensitivity of the Meridian enzyme immunoassay kit was comparable to that of the pronase-containing latex kits. These kits were of equivalent specificities (93 to 100%) when testing serum. Some of the currently available kits have limitations that need to be recognized for proper interpretation of results. Specifically, the use of pronase on serum samples reduces the number of false-positive results, and a titer of < or = 1:4 can be a false-positive result when CSF samples are being tested. PMID:7929757

  2. General Aviation Aircraft Reliability Study

    NASA Technical Reports Server (NTRS)

    Pettit, Duane; Turnbull, Andrew; Roelant, Henk A. (Technical Monitor)

    2001-01-01

    This reliability study was performed in order to provide the aviation community with an estimate of Complex General Aviation (GA) Aircraft System reliability. To successfully improve the safety and reliability for the next generation of GA aircraft, a study of current GA aircraft attributes was prudent. This was accomplished by benchmarking the reliability of operational Complex GA Aircraft Systems. Specifically, Complex GA Aircraft System reliability was estimated using data obtained from the logbooks of a random sample of the Complex GA Aircraft population.

  3. Investigation of the misfueling of reciprocating piston aircraft engines

    NASA Technical Reports Server (NTRS)

    Scott, J. Holland, Jr.

    1988-01-01

    The Aircraft Misfueling Detection Project was developed by the Goddard Space Flight Center/Wallops Flight Facility at Wallops Island, Virginia. Its purpose was to investigate the misfueling of reciprocating piston aircraft engines by the inadvertent introduction of jet fuel in lieu of or as a contaminant of aviation gasoline. The final objective was the development of a device(s) that will satisfactorily detect misfueling and provide pilots with sufficient warning to avoid injury, fatality, or equipment damage. Two devices have been developed and successfully tested: one, a small contamination detection kit, for use by the pilot, and a second, more sensitive, modified gas chromatograph for use by the fixed-base operator. The gas chromatograph, in addition to providing excellent quality control of the fixed-base operator's fuel handling, is a very good backup for the detection kit in the event it produces negative results. Design parameters were developed to the extent that they may be applied easily to commercial production by the aircraft industry.

  4. Lightning protection technology for small general aviation composite material aircraft

    NASA Technical Reports Server (NTRS)

    Plumer, J. A.; Setzer, T. E.; Siddiqi, S.

    1993-01-01

    An on going NASA (Small Business Innovative Research) SBIR Phase II design and development program will produce the first lightning protected, fiberglass, General Aviation aircraft that is available as a kit. The results obtained so far in development testing of typical components of the aircraft kit, such as the wing and fuselage panels indicate that the lightning protection design methodology and materials chosen are capable of protecting such small composite airframes from lightning puncture and structural damage associated with severe threat lightning strikes. The primary objective of the program has been to develop a lightening protection design for full scale test airframe and verify its adequacy with full scale laboratory testing, thus enabling production and sale of owner-built, lightning-protected, Stoddard-Hamilton Aircraft, Inc. Glasair II airplanes. A second objective has been to provide lightning protection design guidelines for the General Aviation industry, and to enable these airplanes to meet lightening protection requirements for certification of small airplanes. This paper describes the protection design approaches and development testing results obtained thus far in the program, together with design methodology which can achieve the design goals listed above. The presentation of this paper will also include results of some of the full scale verification tests, which will have been completed by the time of this conference.

  5. Cable Tensiometer for Aircraft

    NASA Technical Reports Server (NTRS)

    Nunnelee, Mark (Inventor)

    2008-01-01

    The invention is a cable tensiometer that can be used on aircraft for real-time, in-flight cable tension measurements. The invention can be used on any aircraft cables with high precision. The invention is extremely light-weight, hangs on the cable being tested and uses a dual bending beam design with a high mill-volt output to determine tension.

  6. Lightning protection of aircraft

    NASA Technical Reports Server (NTRS)

    Fisher, F. A.; Plumer, J. A.

    1977-01-01

    The current knowledge concerning potential lightning effects on aircraft and the means that are available to designers and operators to protect against these effects are summarized. The increased use of nonmetallic materials in the structure of aircraft and the constant trend toward using electronic equipment to handle flight-critical control and navigation functions have served as impetus for this study.

  7. Civil aircraft accident investigation.

    PubMed

    Haines, Daniel

    2013-01-01

    This talk reviews some historic aircraft accidents and some more recent. It reflects on the division of accident causes, considering mechanical failures and aircrew failures, and on aircrew training. Investigation results may lead to improved aircraft design, and to appropriate crew training. PMID:24057309

  8. Partial desalination and concentration of glyphosate liquor by nanofiltration.

    PubMed

    Xie, Ming; Xu, Yanhua

    2011-02-15

    Partial desalination and concentration of glyphosate liquor by nanofiltration under different operation modes were investigated experimentally in this study. These operation modes were direct nanofiltration, diafiltration, dilute-diafiltration and interval washing-nanofiltration. The four different operation modes were evaluated and compared in terms of glyphosate recovery and NaCl removal. Diafiltration and dilute-diafiltration performed better than direct nanofiltration. The glyphosate loss was between 11.5% and 18.8% when the dilution factor varied from 0.4 to 0.8. Interval washing-nanofiltration alleviated the concentration polarization and membrane fouling to a certain extent. Dilute-diafiltration may be the best operation mode in terms of glyphosate recovery, salt removal and cost.

  9. A process for producing lignocellulosic flocs from NSSC spent liquor.

    PubMed

    Sitter, Thomas; Oveissi, Farshad; Fatehi, Pedram

    2014-03-10

    Presently, the spent liquor (SL) of neutral sulfite semi chemical (NSSC) pulping process is treated in the waste water system. In this work, a new process for isolating lignocelluloses from the SL of an NSSC process is proposed and the effectiveness of this process is evaluated on industrially produced SL. The results showed that under the optimal conditions of pH 6, 30°C and 15mg/g poly ethylene imine (PEI) concentration in the SL, a maximum of 37% lignin and 37% hemicelluloses could be removed from SL. Alternatively, the dual system of poly diallyldimethyl ammonium chloride (PDADMAC) and PEI (7.5mg/g each) was evaluated in removing lignocelluloses from the SL; and the results showed that lignin and hemicellulose removals were improved to 47% and 50%, respectively. The turbidity and chemical oxygen demand (COD) of SL, as well as the elemental analysis of generated flocs were also assessed in this work. PMID:24440635

  10. Solvent extraction of cobalt from laterite-ammoniacal leach liquors

    SciTech Connect

    Nilsen, D.N.; Siemens, R.E.; Rhoads, S.C.

    1980-01-01

    The Bureau of Mines is developing a method to recover Ni, Co, and Cu from laterites containing less than 1.2% Ni and 0.25% Co. The method consists of the following basic unit operations: (1) reduction roasting, (2) leaching, (3) solvent extraction, and (4) electrowinning. The method reflects three Bureau of Mines objectives: (1) recovery of critical minerals that are domestically in short supply from low-grade domestic laterites, (2) lower processing energy requirements, and (3) solution recycling. This report deals with the extraction of cobalt and the preparation of a suitable cobalt electrolyte by solvent extraction from liquor produced by this method. Nickel and copper are coextracted with LIX64N from an ammoniacal ammonium sulfate leach liquor containing about 1.00 g/1 Ni, 0.30 g/1 Co, 0.03 g/1 Cu, and 0.02 g/1 Zn. Cobalt (III) in the nickel-copper barren raffinate is reduced to cobalt (II) with cobalt metal. Reduction of cobalt (III) to cobalt (II) greatly aids subsequent extraction. Commercially available XI-51 extracts about 94% of the cobalt from the treated raffinate in one stage in a laboratory mixer-settler continuous circuit. Ammonia loaded on the solvent is removed in two washing steps. About 94% of the cobalt then is stripped from the XI-51 in one stage with spent cobalt electrolyte containing about 77 g/1 Co and 18 g/1 sulfuric acid (H/sub 2/SO/sub 4/). Electrolytes containing less H/sub 2/SO/sub 4/ also may be used. Preliminary data indicate that coextracted zinc may be removed from pregnant cobalt electrolyte containing 3 g/1 or less H/sub 2/SO/sub 4/ with di-(2 ethylhexyl) phosphoric acid (D2EHPA).

  11. Why aircraft disinsection?

    PubMed Central

    Gratz, N. G.; Steffen, R.; Cocksedge, W.

    2000-01-01

    A serious problem is posed by the inadvertent transport of live mosquitoes aboard aircraft arriving from tropical countries where vector-borne diseases are endemic. Surveys at international airports have found many instances of live insects, particularly mosquitoes, aboard aircraft arriving from countries where malaria and arboviruses are endemic. In some instances mosquito species have been established in countries in which they have not previously been reported. A serious consequence of the transport of infected mosquitoes aboard aircraft has been the numerous cases of "airport malaria" reported from Europe, North America and elsewhere. There is an important on-going need for the disinsection of aircraft coming from airports in tropical disease endemic areas into nonendemic areas. The methods and materials available for use in aircraft disinsection and the WHO recommendations for their use are described. PMID:10994283

  12. Aircraft operations management manual

    NASA Technical Reports Server (NTRS)

    1992-01-01

    The NASA aircraft operations program is a multifaceted, highly diverse entity that directly supports the agency mission in aeronautical research and development, space science and applications, space flight, astronaut readiness training, and related activities through research and development, program support, and mission management aircraft operations flights. Users of the program are interagency, inter-government, international, and the business community. This manual provides guidelines to establish policy for the management of NASA aircraft resources, aircraft operations, and related matters. This policy is an integral part of and must be followed when establishing field installation policy and procedures covering the management of NASA aircraft operations. Each operating location will develop appropriate local procedures that conform with the requirements of this handbook. This manual should be used in conjunction with other governing instructions, handbooks, and manuals.

  13. Hypersonic reconnaissance aircraft

    NASA Technical Reports Server (NTRS)

    Bulk, Tim; Chiarini, David; Hill, Kevin; Kunszt, Bob; Odgen, Chris; Truong, Bon

    1992-01-01

    A conceptual design of a hypersonic reconnaissance aircraft for the U.S. Navy is discussed. After eighteen weeks of work, a waverider design powered by two augmented turbofans was chosen. The aircraft was designed to be based on an aircraft carrier and to cruise 6,000 nautical miles at Mach 4;80,000 feet and above. As a result the size of the aircraft was only allowed to have a length of eighty feet, fifty-two feet in wingspan, and roughly 2,300 square feet in planform area. Since this is a mainly cruise aircraft, sixty percent of its 100,000 pound take-off weight is JP fuel. At cruise, the highest temperature that it will encounter is roughly 1,100 F, which can be handled through the use of a passive cooling system.

  14. INVESTIGATION OF FUEL CHEMISTRY AND BED PERFORMANCE IN A FLUIDIZED BED BLACK LIQUOR STEAM REFORMER

    SciTech Connect

    Kevin Whitty

    2003-12-01

    The University of Utah project ''Investigation of Fuel Chemistry and Bed Performance in a Fluidized Bed Black Liquor Steam Reformer'' (DOE award number DE-FC26-02NT41490) was developed in response to a solicitation for projects to provide technical support for black liquor and biomass gasification. The primary focus of the project is to provide support for a DOE-sponsored demonstration of MTCI's black liquor steam reforming technology at Georgia-Pacific's paper mill in Big Island, Virginia. A more overarching goal is to improve the understanding of phenomena that take place during low temperature black liquor gasification. This is achieved through five complementary technical tasks: (1) construction of a fluidized bed black liquor gasification test system, (2) investigation of bed performance, (3) evaluation of product gas quality, (4) black liquor conversion analysis and modeling and (5) computational modeling of the Big Island gasifier. Four experimental devices have been constructed under this project. The largest facility, which is the heart of the experimental effort, is a pressurized fluidized bed gasification test system. The system is designed to be able to reproduce conditions near the black liquor injectors in the Big Island steam reformer, so the behavior of black liquor pyrolysis and char gasification can be quantified in a representative environment. The gasification test system comprises five subsystems: steam generation and superheating, black liquor feed, fluidized bed reactor, afterburner for syngas combustion and a flue gas cooler/condenser. The three-story system is located at University of Utah's Industrial Combustion and Gasification Research Facility, and all resources there are available to support the research.

  15. Incorporation of inorganic material in anoxic/aerobic-activated sludge system mixed liquor.

    PubMed

    Wentzel, M C; Ubisi, M F; Lakay, M T; Ekama, G A

    2002-12-01

    In the bioreactor of the nitrification denitrification (ND)-activated sludge system, the mixed liquor is made up of organic and inorganic materials. In the current design procedures and simulation models, the influent wastewater characteristics and biological processes that influence the bioreactor mixed liquor organic solids (as volatile suspended solids, VSS, or COD) are explicitly included. However, the mixed liquor total suspended solids (TSS, i.e. organic + inorganic solids) are calculated simply from empirical ratios of VSS/TSS. The TSS concentration is fundamental in the design of secondary settling tanks and waste activated sludge disposal. Clearly, the empirical approach to obtaining an estimate for TSS is not satisfactory within the framework of a fundamentally based model. Accordingly, the incorporation of the inorganic material present in the influent wastewater into ND-activated sludge system mixed liquor was investigated. From an experimental investigation into the distribution of inorganics in the influent, mixed liquor and effluent of a laboratory-scale ND-activated sludge system, it was concluded inter alia that (i) of the total inorganic solids in the influent, only a small fraction (2.8-7.5%) is incorporated into the mixed liquor, (ii) most of the inorganics in the influent (mean 88%) and effluent (mean 98.5%) are in the dissolved form, the balance being particulate, and (iii) the influent and effluent inorganic dissolved solids concentrations are closely equal (mean effluent to influent ratio 100%). Further, a number of models were developed to quantify the mixed liquor inorganic, and, hence, total solids. From an evaluation of these models against the experimental data, it would appear that the best approach to model the incorporation of inorganics into the activated sludge mixed liquor is to follow the concepts and principles used to develop the existing models for organic materials. With this approach, reasonably close correlation between

  16. The Fluid Dynamics Demo Kit: Part II

    NASA Astrophysics Data System (ADS)

    Underhill, Patrick; Fix, Hannah; Haines, Timothy; Prestridge, Kathy; Flack, Karen

    2012-11-01

    This talk will focus on the current contents and efforts building a fluid dynamics demonstration/experiment kit through the APS-DFD Mentoring and Outreach Committee and with funding from the APS DFD. The current experiments include predicting how far the water from a water gun will go, predicting how long a Heron's fountain will run, measuring the viscosity of corn syrup by measuring terminal velocity, and measuring the flow rate through a siphon. We will discuss the testing and development of these experiments and the results of field testing. Ideas for future experiments will also be discussed.

  17. Food kit used by Mercury astronauts

    NASA Technical Reports Server (NTRS)

    1962-01-01

    Food kit used by Mercury astronauts. Some is dehydrated and needs water, other packets are ready to eat. Size is measured relative to a ruler. Included are packets of mushroom soup, orange-grapefruit juice, cocoa beverage, pineapple juice, chicken with gravy, pears, strawberries, beef and vegetables and other assorted food containers (08742-3); mechanism for connecting water dispensor to dehydrated food containers to facilitate rehydration (08744); Group packets of ready to eat space food, with size being measured by a ruler (8745).

  18. Chemical Analysis of the Chinese Liquor Luzhoulaojiao by Comprehensive Two-Dimensional Gas Chromatography/Time-of-Flight Mass Spectrometry

    PubMed Central

    Yao, Feng; Yi, Bin; Shen, Caihong; Tao, Fei; Liu, Yumin; Lin, Zhixin; Xu, Ping

    2015-01-01

    Luzhoulaojiao liquor is a type of Chinese liquor that dates back hundreds of years, but whose precise chemical composition remains unknown. This paper describes the screening of the liquor and the identification of its compounds using comprehensive two-dimensional gas chromatography/time-of-flight mass spectrometry (GC × GC/TOF-MS). Samples were prepared by both liquid-liquid extraction and solid-phase microextraction, which facilitated the detection of thousands of compounds in the liquor, thus demonstrating the superior performance of the proposed method over those reported in previous studies. A total of 320 compounds were common to all 18 types of Luzhoulaojiao liquor studied here, and 13 abundant and potentially bioactive compounds were further quantified. The results indicated that the high-performance method presented here is well suited for the detection and identification of compounds in liquors. This study also contributes to enriching our knowledge of the contents of Chinese liquors. PMID:25857434

  19. Chemical Analysis of the Chinese Liquor Luzhoulaojiao by Comprehensive Two-Dimensional Gas Chromatography/Time-of-Flight Mass Spectrometry

    NASA Astrophysics Data System (ADS)

    Yao, Feng; Yi, Bin; Shen, Caihong; Tao, Fei; Liu, Yumin; Lin, Zhixin; Xu, Ping

    2015-04-01

    Luzhoulaojiao liquor is a type of Chinese liquor that dates back hundreds of years, but whose precise chemical composition remains unknown. This paper describes the screening of the liquor and the identification of its compounds using comprehensive two-dimensional gas chromatography/time-of-flight mass spectrometry (GC × GC/TOF-MS). Samples were prepared by both liquid-liquid extraction and solid-phase microextraction, which facilitated the detection of thousands of compounds in the liquor, thus demonstrating the superior performance of the proposed method over those reported in previous studies. A total of 320 compounds were common to all 18 types of Luzhoulaojiao liquor studied here, and 13 abundant and potentially bioactive compounds were further quantified. The results indicated that the high-performance method presented here is well suited for the detection and identification of compounds in liquors. This study also contributes to enriching our knowledge of the contents of Chinese liquors.

  20. Comparison of presumptive blood test kits including hexagon OBTI.

    PubMed

    Johnston, Emma; Ames, Carole E; Dagnall, Kathryn E; Foster, John; Daniel, Barbara E

    2008-05-01

    Four presumptive blood tests, Hexagon OBTI, Hemastix(R), Leucomalachite green (LMG), and Kastle-Meyer (KM) were compared for their sensitivity in the identification of dried bloodstains. Stains of varying blood dilutions were subjected to each presumptive test and the results compared. The Hexagon OBTI buffer volume was also reduced to ascertain whether this increased the sensitivity of the kit. The study found that Hemastix(R) was the most sensitive test for trace blood detection. Only with the reduced buffer volume was the Hexagon OBTI kit as sensitive as the LMG and KM tests. However, the Hexagon OBTI kit has the advantage of being a primate specific blood detection kit. This study also investigated whether the OBTI buffer within the kit could be utilized for DNA profiling after presumptive testing. The results show that DNA profiles can be obtained from the Hexagon OBTI kit buffer directly.

  1. State-Specific Liquor Excise Taxes and Retail Prices in Eight U.S. States, 2012

    PubMed Central

    Siegel, Michael; Grundman, Jody; DeJong, William; Naimi, Timothy S.; King, Charles; Albers, Alison B.; Williams, Rebecca S.; Jernigan, David H.

    2013-01-01

    We investigated the relationship between state excise taxes and liquor prices in eight states, using 2012 data for 45 brands. We made 6,042 price observations among 177 liquor stores with online prices. Using a hierarchical model, we examined the relationship between excise taxes and product prices. State excise taxes were significantly related to liquor prices, with an estimated pass-through rate of 0.93. The proportion of price accounted for by excise taxes averaged 7.0%. We find that excise taxes do increase the price of alcohol, but states are not taking advantage of this opportunity to reduce alcohol-related morbidity and mortality. PMID:24159914

  2. State-specific liquor excise taxes and retail prices in 8 US states, 2012.

    PubMed

    Siegel, Michael; Grundman, Jody; DeJong, William; Naimi, Timothy S; King, Charles; Albers, Alison B; Williams, Rebecca S; Jernigan, David H

    2013-01-01

    The authors investigated the relationship between state excise taxes and liquor prices in 8 states, using 2012 data for 45 brands. The authors made 6042 price observations among 177 liquor stores with online prices. Using a hierarchical model, the authors examined the relationship between excise taxes and product prices. State excise taxes were significantly related to liquor prices, with an estimated pass-through rate of 0.93. The proportion of price accounted for by excise taxes averaged 7.0%. The authors find that excise taxes do increase the price of alcohol, but states are not taking advantage of this opportunity to reduce alcohol-related morbidity and mortality.

  3. Method for improving separation of carbohydrates from wood pulping and wood or biomass hydrolysis liquors

    DOEpatents

    Griffith, William Louis; Compere, Alicia Lucille; Leitten, Jr., Carl Frederick

    2010-04-20

    A method for separating carbohydrates from pulping liquors includes the steps of providing a wood pulping or wood or biomass hydrolysis pulping liquor having lignin therein, and mixing the liquor with an acid or a gas which forms an acid upon contact with water to initiate precipitation of carbohydrate to begin formation of a precipitate. During precipitation, at least one long chain carboxylated carbohydrate and at least one cationic polymer, such as a polyamine or polyimine are added, wherein the precipitate aggregates into larger precipitate structures. Carbohydrate gel precipitates are then selectively removed from the larger precipitate structures. The method process yields both a carbohydrate precipitate and a high purity lignin.

  4. Investigation of Fuel Chemistry and Bed Performance in a Fluidized Bed Black Liquor Steam Reformer

    SciTech Connect

    Kevin Whitty

    2007-06-30

    University of Utah's project entitled 'Investigation of Fuel Chemistry and Bed Performance in a Fluidized Bed Black Liquor Steam Reformer' (DOE Cooperative Agreement DE-FC26-02NT41490) was developed in response to a solicitation released by the U.S. Department of Energy in December 2001, requesting proposals for projects targeted towards black liquor/biomass gasification technology support research and development. Specifically, the solicitation was seeking projects that would provide technical support for Department of Energy supported black liquor and biomass gasification demonstration projects under development at the time.

  5. Use of sulfide-containing liquors for removing mercury from flue gases

    DOEpatents

    Nolan, Paul S.; Downs, William; Bailey, Ralph T.; Vecci, Stanley J.

    2003-01-01

    A method and apparatus for reducing and removing mercury in industrial gases, such as a flue gas, produced by the combustion of fossil fuels, such as coal, adds sulfide ions to the flue gas as it passes through a scrubber. Ideally, the source of these sulfide ions may include at least one of: sulfidic waste water, kraft caustic liquor, kraft carbonate liquor, potassium sulfide, sodium sulfide, and thioacetamide. The sulfide ion source is introduced into the scrubbing liquor as an aqueous sulfide species. The scrubber may be either a wet or dry scrubber for flue gas desulfurization systems.

  6. Use of sulfide-containing liquors for removing mercury from flue gases

    DOEpatents

    Nolan, Paul S.; Downs, William; Bailey, Ralph T.; Vecci, Stanley J.

    2006-05-02

    A method and apparatus for reducing and removing mercury in industrial gases, such as a flue gas, produced by the combustion of fossil fuels, such as coal, adds sulfide ions to the flue gas as it passes through a scrubber. Ideally, the source of these sulfide ions may include at least one of: sulfidic waste water, kraft caustic liquor, kraft carbonate liquor, potassium sulfide, sodium sulfide, and thioacetamide. The sulfide ion source is introduced into the scrubbing liquor as an aqueous sulfide species. The scrubber may be either a wet or dry scrubber for flue gas desulfurization systems.

  7. A novel method for the determination of black liquor viscosity by multiple headspace extraction gas chromatography.

    PubMed

    Hu, Hui-Chao; Chai, Xin-Sheng

    2013-12-13

    This work demonstrates a novel method for the determination of viscosity in the concentrated black liquors from pulp mill recovery process. The method is based on the kinetic release of methanol (a vapor tracer) to the headspace in a sample closed vial by a multiple headspace extraction gas chromatographic technique. Both theoretical and empirical models were proposed for establishing the correlation with the reference method. The results showed that the correlation using either of the models is excellent for the tested black liquor samples (at 110°C). The presented method is simple and practical and can be a valuable tool for black liquor viscosity related research and applications.

  8. Data Center Energy Efficiency Measurement Assessment Kit Guide and Specification

    SciTech Connect

    2012-10-26

    A portable and temporary wireless mesh assessment kit can be used to speed up and reduce the costs of a data center energy use assessment and overcome the issues with respect to shutdowns. The assessment kit is comprised of temperature, relative humidity, and pressure sensors. Also included are power meters that can be installed on computer room air conditioners (CRACs) without intrusive interruption of data center operations. The assessment kit produces data required for a detailed energy assessment of the data center.

  9. 21 CFR 880.5960 - Lice removal kit.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Lice removal kit. 880.5960 Section 880.5960 Food... § 880.5960 Lice removal kit. (a) Identification. The lice removal kit is a comb or comb-like device intended to remove and/or kill lice and nits from head and body hair. It may or may not be battery...

  10. 33 CFR 144.01-30 - First-aid kit.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false First-aid kit. 144.01-30 Section 144.01-30 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES LIFESAVING APPLIANCES Manned Platforms § 144.01-30 First-aid kit. On each manned platform a first-aid kit...

  11. 46 CFR 184.710 - First-aid kits.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false First-aid kits. 184.710 Section 184.710 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) VESSEL CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Miscellaneous § 184.710 First-aid kits. A vessel must carry either a first-aid kit approved...

  12. To Kit or Not to Kit? Evaluating and Implementing Science Materials and Resources

    ERIC Educational Resources Information Center

    Schiller, Ellen; Melin, Jacque; Bair, Mary

    2016-01-01

    With the release of the "Next Generation Science Standards," many schools are reexamining the science materials they are using. Textbook companies and kit developers are eager to meet the demand for "NGSS"-aligned teaching materials. Teacher may have been asked to serve on a science curriculum committee, or to evaluate current…

  13. Selling Addiction: A Workshop Kit on Tobacco and Alcohol Advertising. A Media Literacy Workshop Kit.

    ERIC Educational Resources Information Center

    Barnes, Mary Ellen; And Others

    This kit consists of: (1) a leader's guide; (2) an 18-minute videotape containing three 6-minute discussion starter segments analyzing typical commercials and advertising techniques; (3) a special issue of "Media Values" magazine on the theme "Fatal Attraction: The Selling of Addiction"; (4) an 8-page booklet "Awareness to Action: Media Literacy…

  14. FUELS IN SOIL TEST KIT: FIELD USE OF DIESEL DOG SOIL TEST KITS

    SciTech Connect

    Susan S. Sorini; John F. Schabron; Joseph F. Rovani, Jr.

    2002-09-30

    Western Research Institute (WRI) has developed a new commercial product ready for technology transfer, the Diesel Dog{reg_sign} Portable Soil Test Kit, for performing analysis of fuel-contaminated soils in the field. The technology consists of a method developed by WRI (U.S. Patents 5,561,065 and 5,976,883) and hardware developed by WRI that allows the method to be performed in the field (patent pending). The method is very simple and does not require the use of highly toxic reagents. The aromatic components in a soil extract are measured by absorption at 254 nm with a field-portable photometer. WRI added significant value to the technology by taking the method through the American Society for Testing and Materials (ASTM) approval and validation processes. The method is designated as ASTM Method D 5831-96, Standard Test Method for Screening Fuels in Soils. This ASTM designation allows the method to be used for federal compliance activities. In June 2001, the Diesel Dog technology won an American Chemical Society Regional Industrial Innovations Award. To gain field experience with the new technology, Diesel Dog kits have been used for a variety of site evaluation and cleanup activities. Information gained from these activities has led to improvements in hardware configurations and additional insight into correlating Diesel Dog results with results from laboratory methods. The Wyoming Department of Environmental Quality (DEQ) used Diesel Dog Soil Test Kits to guide cleanups at a variety of sites throughout the state. ENSR, of Acton, Massachusetts, used a Diesel Dog Portable Soil Test Kit to evaluate sites in the Virgin Islands and Georgia. ChemTrack and the U.S. Army Corps of Engineers successfully used a test kit to guide excavation at an abandoned FAA fuel-contaminated site near Fairbanks, Alaska. Barenco, Inc. is using a Diesel Dog Portable Soil Test Kit for site evaluations in Canada. A small spill of diesel fuel was cleaned up in Laramie, Wyoming using a Diesel

  15. Phase II Study of Nilotinib in Melanoma Harboring KIT Alterations Following Progression to Prior KIT Inhibition

    PubMed Central

    Carvajal, Richard D.; Lawrence, Donald P.; Weber, Jeffrey S.; Gajewski, Thomas F.; Gonzalez, Rene; Lutzky, Jose; O’Day, Steven J.; Hamid, Omid; Wolchok, Jedd D.; Chapman, Paul B.; Sullivan, Ryan J.; Teitcher, Jerrold B.; Ramaiya, Nikhil; Giobbie-Hurder, Anita; Antonescu, Cristina R.; Heinrich, Michael C.; Bastian, Boris C.; Corless, Christopher L.; Fletcher, Jonathan A.; Hodi, F. Stephen

    2016-01-01

    Purpose Although durable responses can be achieved with tyrosine kinase inhibitors such as imatinib in melanomas harboring KIT mutations, the efficacy of alternative inhibitors after progression to imatinib and the activity of these agents on brain metastases is unknown. Experimental Design We conducted a phase II study of nilotinib 400 mg BID in two cohorts of patients with melanomas harboring KIT mutations or amplification: A) those refractory or intolerant to a prior KIT inhibitor; and B) those with brain metastases. The primary endpoint was 4-month disease control rate. Secondary endpoints included response rate, time-to-progression and overall survival. A Simon two-stage and a single-stage design was planned to assess for the primary endpoint in Cohorts A and B, respectively. Results Twenty patients were enrolled and 19 treated (11-Cohort A; 8-Cohort B). Three patients on Cohort A (27%; 95% CI, 8% – 56%) and 1 on Cohort B (12.5%; 90% CI, 0.6% – 47%) achieved the primary endpoint. Two partial responses were observed in Cohort A (18.2%, 90% CI, 3% – 47%); none were observed in Cohort B. The median time-to-progression and overall survival was 3·3 (90% CI, 2.1 – 3.9 months) and 9.1 months (90% CI, 4.3 – 14.2 months), respectively, in all treated patients. Conclusion Nilotinib may achieve disease control in patients with melanoma harboring KIT alterations and whose disease progressed after imatinib therapy. The efficacy of this agent in KIT altered melanoma with brain metastasis is limited. PMID:25695690

  16. [First aid kits: for whom and why?].

    PubMed

    Tessier, D

    1997-01-01

    Anyone traveling far from home should take along a first aid kit. Contents should be chosen carefully with the awareness that infection is not the main problem facing travelers. The basic kit is the same regardless of the purpose or duration of the trip or of the health and knowledge of the traveler. Priority should be given to allergic risks, to the quality of the thermometer, to the packaging of indispensable medications to a medical certificate justifying transport of drugs and syringes for personal medical use, and to preventive devices for sexually transmitted diseases. Travel in tropical zones raises special requirements especially with regard to infectious risks such as traveler's diarrhea, malaria, fungal and bacterial contamination. Protection against insect-borne disease and sun exposure are also important considerations for travel in the tropics. Depending on planned activities, travelers should carry medication for prevention and treatment of motion sickness and emergency treatment of envenimation. Due to local inavailabilities, it may be necessary to pack contraceptives, personal hygiene products, and common medications.

  17. The Virtual Physiological Human ToolKit.

    PubMed

    Cooper, Jonathan; Cervenansky, Frederic; De Fabritiis, Gianni; Fenner, John; Friboulet, Denis; Giorgino, Toni; Manos, Steven; Martelli, Yves; Villà-Freixa, Jordi; Zasada, Stefan; Lloyd, Sharon; McCormack, Keith; Coveney, Peter V

    2010-08-28

    The Virtual Physiological Human (VPH) is a major European e-Science initiative intended to support the development of patient-specific computer models and their application in personalized and predictive healthcare. The VPH Network of Excellence (VPH-NoE) project is tasked with facilitating interaction between the various VPH projects and addressing issues of common concern. A key deliverable is the 'VPH ToolKit'--a collection of tools, methodologies and services to support and enable VPH research, integrating and extending existing work across Europe towards greater interoperability and sustainability. Owing to the diverse nature of the field, a single monolithic 'toolkit' is incapable of addressing the needs of the VPH. Rather, the VPH ToolKit should be considered more as a 'toolbox' of relevant technologies, interacting around a common set of standards. The latter apply to the information used by tools, including any data and the VPH models themselves, and also to the naming and categorizing of entities and concepts involved. Furthermore, the technologies and methodologies available need to be widely disseminated, and relevant tools and services easily found by researchers. The VPH-NoE has thus created an online resource for the VPH community to meet this need. It consists of a database of tools, methods and services for VPH research, with a Web front-end. This has facilities for searching the database, for adding or updating entries, and for providing user feedback on entries. Anyone is welcome to contribute. PMID:20643685

  18. Predicting visibility of aircraft.

    PubMed

    Watson, Andrew; Ramirez, Cesar V; Salud, Ellen

    2009-05-20

    Visual detection of aircraft by human observers is an important element of aviation safety. To assess and ensure safety, it would be useful to be able to be able to predict the visibility, to a human observer, of an aircraft of specified size, shape, distance, and coloration. Examples include assuring safe separation among aircraft and between aircraft and unmanned vehicles, design of airport control towers, and efforts to enhance or suppress the visibility of military and rescue vehicles. We have recently developed a simple metric of pattern visibility, the Spatial Standard Observer (SSO). In this report we examine whether the SSO can predict visibility of simulated aircraft images. We constructed a set of aircraft images from three-dimensional computer graphic models, and measured the luminance contrast threshold for each image from three human observers. The data were well predicted by the SSO. Finally, we show how to use the SSO to predict visibility range for aircraft of arbitrary size, shape, distance, and coloration.

  19. Predicting Visibility of Aircraft

    PubMed Central

    Watson, Andrew; Ramirez, Cesar V.; Salud, Ellen

    2009-01-01

    Visual detection of aircraft by human observers is an important element of aviation safety. To assess and ensure safety, it would be useful to be able to be able to predict the visibility, to a human observer, of an aircraft of specified size, shape, distance, and coloration. Examples include assuring safe separation among aircraft and between aircraft and unmanned vehicles, design of airport control towers, and efforts to enhance or suppress the visibility of military and rescue vehicles. We have recently developed a simple metric of pattern visibility, the Spatial Standard Observer (SSO). In this report we examine whether the SSO can predict visibility of simulated aircraft images. We constructed a set of aircraft images from three-dimensional computer graphic models, and measured the luminance contrast threshold for each image from three human observers. The data were well predicted by the SSO. Finally, we show how to use the SSO to predict visibility range for aircraft of arbitrary size, shape, distance, and coloration. PMID:19462007

  20. OVRhyp, Scramjet Test Aircraft

    NASA Technical Reports Server (NTRS)

    Aslan, J.; Bisard, T.; Dallinga, S.; Draper, K.; Hufford, G.; Peters, W.; Rogers, J.

    1990-01-01

    A preliminary design for an unmanned hypersonic research vehicle to test scramjet engines is presented. The aircraft will be launched from a carrier aircraft at an altitude of 40,000 feet at Mach 0.8. The vehicle will then accelerate to Mach 6 at an altitude of 100,000 feet. At this stage the prototype scramjet will be employed to accelerate the vehicle to Mach 10 and maintain Mach 10 flight for 2 minutes. The aircraft will then decelerate and safely land.

  1. Aircraft compass characteristics

    NASA Technical Reports Server (NTRS)

    Peterson, John B; Smith, Clyde W

    1937-01-01

    A description of the test methods used at the National Bureau of Standards for determining the characteristics of aircraft compasses is given. The methods described are particularly applicable to compasses in which mineral oil is used as the damping liquid. Data on the viscosity and density of certain mineral oils used in United States Navy aircraft compasses are presented. Characteristics of Navy aircraft compasses IV to IX and some other compasses are shown for the range of temperatures experienced in flight. Results of flight tests are presented. These results indicate that the characteristic most desired in a steering compass is a short period and, in a check compass, a low overswing.

  2. Loftin Collection - Boeing Aircraft

    NASA Technical Reports Server (NTRS)

    1933-01-01

    Either a F2B-1 or F3B-1, both aircraft were built by Boeing and both were powered by Pratt and Whitney Wasp engines. These fighters were intended for Navy shipboard use. Boeing F3B-1: While most Boeing F3B-1s served the U. S. Navy aircraft carriers the Lexington and the Saratoga, this example flew in NACA hands at the Langley Memorial Aeronautical Laboratory in the late 1920's. Also known as the Boeing Model 77, the aircraft was the next to last F3B-1 build in November 1928.

  3. Some fighter aircraft trends

    NASA Technical Reports Server (NTRS)

    Spearman, L.

    1985-01-01

    Some basic trends in fighters are traced from the post World II era. Beginning with the first operational jet fighter, the P-80, the characteristics of subsequent fighter aircraft are examined for performance, mission capability, effectiveness, and cost. Characteristics presented include: power loading, wing loading, maximum speed, rate of climb, turn rate, weight and weight distribution, cost and cost distribution. The characteristics of some USSR aircraft are included for comparison. The trends indicate some of the rationale for certain fighter designs and some likely characteristics to be sought in future fighter aircraft designs.

  4. Lightning hazards to aircraft

    NASA Technical Reports Server (NTRS)

    Corn, P. B.

    1978-01-01

    Lightning hazards and, more generally, aircraft static electricity are discussed by a representative for the Air Force Flight Dynamics Laboratory. An overview of these atmospheric electricity hazards to aircraft and their systems is presented with emphasis on electrical and electronic subsystems. The discussion includes reviewing some of the characteristics of lightning and static electrification, trends in weather and lightning-related mishaps, some specific threat mechanisms and susceptible aircraft subsystems and some of the present technology gaps. A roadmap (flow chart) is presented to show the direction needed to address these problems.

  5. Tropospheric sampling with aircraft

    SciTech Connect

    Daum, P.H.; Springston, S.R.

    1991-03-01

    Aircraft constitute a unique environment which places stringent requirements on the instruments used to measure the concentrations of atmospheric trace gases and aerosols. Some of these requirements such as minimization of size, weight, and power consumption are general; others are specific to individual techniques. This review presents the basic principles and considerations governing the deployment of trace gas and aerosol instrumentation on an aircraft. An overview of common instruments illustrates these points and provides guidelines for designing and using instruments on aircraft-based measurement programs.

  6. Black liquor fractionation for biofuels production - a techno-economic assessment.

    PubMed

    Mesfun, Sennai; Lundgren, Joakim; Grip, Carl-Erik; Toffolo, Andrea; Nilsson, Rasika Lasanthi Kudahettige; Rova, Ulrika

    2014-08-01

    The hemicelluloses fraction of black liquor is an underutilized resource in many chemical pulp mills. It is possible to extract and separate the lignin and hemicelluloses from the black liquor and use the hemicelluloses for biochemical conversion into biofuels and chemicals. Precipitation of the lignin from the black liquor would consequently decrease the thermal load on the recovery boiler, which is often referred to as a bottleneck for increased pulp production. The objective of this work is to techno-economically evaluate the production of sodium-free lignin as a solid fuel and butanol to be used as fossil gasoline replacement by fractionating black liquor. The hydrolysis and fermentation processes are modeled in Aspen Plus to analyze energy and material balances as well as to evaluate the plant economics. A mathematical model of an existing pulp and paper mill is used to analyze the effects on the energy performance of the mill subprocesses.

  7. Black liquor fractionation for biofuels production - a techno-economic assessment.

    PubMed

    Mesfun, Sennai; Lundgren, Joakim; Grip, Carl-Erik; Toffolo, Andrea; Nilsson, Rasika Lasanthi Kudahettige; Rova, Ulrika

    2014-08-01

    The hemicelluloses fraction of black liquor is an underutilized resource in many chemical pulp mills. It is possible to extract and separate the lignin and hemicelluloses from the black liquor and use the hemicelluloses for biochemical conversion into biofuels and chemicals. Precipitation of the lignin from the black liquor would consequently decrease the thermal load on the recovery boiler, which is often referred to as a bottleneck for increased pulp production. The objective of this work is to techno-economically evaluate the production of sodium-free lignin as a solid fuel and butanol to be used as fossil gasoline replacement by fractionating black liquor. The hydrolysis and fermentation processes are modeled in Aspen Plus to analyze energy and material balances as well as to evaluate the plant economics. A mathematical model of an existing pulp and paper mill is used to analyze the effects on the energy performance of the mill subprocesses. PMID:24950095

  8. Simultaneous and rapid determination of multiple component concentrations in a Kraft liquor process stream

    DOEpatents

    Li, Jian; Chai, Xin Sheng; Zhu, Junyoung

    2008-06-24

    The present invention is a rapid method of determining the concentration of the major components in a chemical stream. The present invention is also a simple, low cost, device of determining the in-situ concentration of the major components in a chemical stream. In particular, the present invention provides a useful method for simultaneously determining the concentrations of sodium hydroxide, sodium sulfide and sodium carbonate in aqueous kraft pulping liquors through use of an attenuated total reflectance (ATR) tunnel flow cell or optical probe capable of producing a ultraviolet absorbency spectrum over a wavelength of 190 to 300 nm. In addition, the present invention eliminates the need for manual sampling and dilution previously required to generate analyzable samples. The inventive method can be used in Kraft pulping operations to control white liquor causticizing efficiency, sulfate reduction efficiency in green liquor, oxidation efficiency for oxidized white liquor and the active and effective alkali charge to kraft pulping operations.

  9. Antecedents and analogues - Experimental aircraft

    NASA Technical Reports Server (NTRS)

    Smith, R. H.

    1978-01-01

    The paper reviews the development of experimental aircraft from 1953 to the present. Consideration is given to the X-series experimental aircraft, to X-15 (the first aerospace plane), to the transition of experimental aircraft to high-speed flight, to XB-70 research, to lifting body research aircraft, and to current high-speed flight research.

  10. Polarization-phase images of liquor polycrystalline films in determining time of death.

    PubMed

    Garazdyuk, M S; Bachinskyi, V T; Vanchulyak, O Ya; Ushenko, A G; Dubolazov, O V; Gorsky, M P

    2016-04-20

    An optical model for generalized optical anisotropy of polycrystalline networks of albumin and globulin liquor of the human brain has been suggested. The polarization-phase method for spatial and frequency differentiation of linear and circular birefringence coordinate distributions has been analytically substantiated. A set of criteria documenting the dynamics of polarization-phase images of liquor polycrystalline films has been identified in determining time of death. PMID:27140134

  11. A comprehensive program to develop correlations for the physical properties of Kraft black liquor. Interim report No. 3

    SciTech Connect

    Fricke, A.L.; Dong, D.J.; Schmidl, G.W.; Stoy, M.A.; Zaman, A.A.

    1993-09-01

    The black liquor properties program has been conducted over this last period so as to systematically collect data on properties, liquor composition, and lignin characteristics very carefully by methods that have developed during this program. Complete data has been collected for Slash Pine black liquors made by experimental pulping at different pulping conditions. In addition, data has been collected for mill liquors and partial properties or composition data has been collected on Slash Pine black liquors. Data reduction methods have been developed or extended for correlation of viscosity, heat capacity, heat of dilution, and density. Correlation of properties to pulping conditions and of composition to. pulping conditions has begun. In most cases, data reduction methods have been developed that are fundamentally based and that have been shown to be generally applicable to all black liquors. In the near future, we fully expect to accomplish our goal of developing generalized correlations relating physical properties of Slash Pine kraft black liquors to liquor composition. This interim report reviews the methods used, describes examples of data reduction methods that have been developed, and presents some preliminary results for correlation of liquor composition and properties to pulping conditions for Slash Pine black liquors.

  12. Depreciation of aircraft

    NASA Technical Reports Server (NTRS)

    Warner, Edward P

    1922-01-01

    There is a widespread, and quite erroneous, impression to the effect that aircraft are essentially fragile and deteriorate with great rapidity when in service, so that the depreciation charges to be allowed on commercial or private operation are necessarily high.

  13. Advanced hypersonic aircraft design

    NASA Technical Reports Server (NTRS)

    Utzinger, Rob; Blank, Hans-Joachim; Cox, Craig; Harvey, Greg; Mckee, Mike; Molnar, Dave; Nagy, Greg; Petersen, Steve

    1992-01-01

    The objective of this design project is to develop the hypersonic reconnaissance aircraft to replace the SR-71 and to complement existing intelligence gathering devices. The initial design considerations were to create a manned vehicle which could complete its mission with at least two airborne refuelings. The aircraft must travel between Mach 4 and Mach 7 at an altitude of 80,000 feet for a maximum range of 12,000 nautical miles. The vehicle should have an air breathing propulsion system at cruise. With a crew of two, the aircraft should be able to take off and land on a 10,000 foot runway, and the yearly operational costs were not to exceed $300 million. Finally, the aircraft should exhibit stealth characteristics, including a minimized radar cross-section (RCS) and a reduced sonic boom. The technology used in this vehicle should allow for production between the years 1993 and 1995.

  14. Aircraft Engine Emissions. [conference

    NASA Technical Reports Server (NTRS)

    1977-01-01

    A conference on a aircraft engine emissions was held to present the results of recent and current work. Such diverse areas as components, controls, energy efficient engine designs, and noise and pollution reduction are discussed.

  15. The Aircraft Morphing Program

    NASA Technical Reports Server (NTRS)

    Wlezien, R. W.; Horner, G. C.; McGowan, A. R.; Padula, S. L.; Scott, M. A.; Silcox, R. J.; Simpson, J. O.

    1998-01-01

    In the last decade smart technologies have become enablers that cut across traditional boundaries in materials science and engineering. Here we define smart to mean embedded actuation, sensing, and control logic in a tightly coupled feedback loop. While multiple successes have been achieved in the laboratory, we have yet to see the general applicability of smart devices to real aircraft systems. The NASA Aircraft Morphing program is an attempt to couple research across a wide range of disciplines to integrate smart technologies into high payoff aircraft applications. The program bridges research in seven individual disciplines and combines the effort into activities in three primary program thrusts. System studies are used to assess the highest- payoff program objectives, and specific research activities are defined to address the technologies required for development of smart aircraft systems. In this paper we address the overall program goals and programmatic structure, and discuss the challenges associated with bringing the technologies to fruition.

  16. Laminar Flow Aircraft Certification

    NASA Technical Reports Server (NTRS)

    Williams, Louis J. (Compiler)

    1986-01-01

    Various topics telative to laminar flow aircraft certification are discussed. Boundary layer stability, flaps for laminar flow airfoils, computational wing design studies, manufacturing requirements, windtunnel tests, and flow visualization are among the topics covered.

  17. Aircraft electromagnetic compatibility

    NASA Technical Reports Server (NTRS)

    Clarke, Clifton A.; Larsen, William E.

    1987-01-01

    Illustrated are aircraft architecture, electromagnetic interference environments, electromagnetic compatibility protection techniques, program specifications, tasks, and verification and validation procedures. The environment of 400 Hz power, electrical transients, and radio frequency fields are portrayed and related to thresholds of avionics electronics. Five layers of protection for avionics are defined. Recognition is given to some present day electromagnetic compatibility weaknesses and issues which serve to reemphasize the importance of EMC verification of equipment and parts, and their ultimate EMC validation on the aircraft. Proven standards of grounding, bonding, shielding, wiring, and packaging are laid out to help provide a foundation for a comprehensive approach to successful future aircraft design and an understanding of cost effective EMC in an aircraft setting.

  18. Solar thermal aircraft

    DOEpatents

    Bennett, Charles L.

    2007-09-18

    A solar thermal powered aircraft powered by heat energy from the sun. A heat engine, such as a Stirling engine, is carried by the aircraft body for producing power for a propulsion mechanism, such as a propeller. The heat engine has a thermal battery in thermal contact with it so that heat is supplied from the thermal battery. A solar concentrator, such as reflective parabolic trough, is movably connected to an optically transparent section of the aircraft body for receiving and concentrating solar energy from within the aircraft. Concentrated solar energy is collected by a heat collection and transport conduit, and heat transported to the thermal battery. A solar tracker includes a heliostat for determining optimal alignment with the sun, and a drive motor actuating the solar concentrator into optimal alignment with the sun based on a determination by the heliostat.

  19. Aircraft parameter estimation

    NASA Technical Reports Server (NTRS)

    Iliff, Kenneth W.

    1987-01-01

    The aircraft parameter estimation problem is used to illustrate the utility of parameter estimation, which applies to many engineering and scientific fields. Maximum likelihood estimation has been used to extract stability and control derivatives from flight data for many years. This paper presents some of the basic concepts of aircraft parameter estimation and briefly surveys the literature in the field. The maximum likelihood estimator is discussed, and the basic concepts of minimization and estimation are examined for a simple simulated aircraft example. The cost functions that are to be minimized during estimation are defined and discussed. Graphic representations of the cost functions are given to illustrate the minimization process. Finally, the basic concepts are generalized, and estimation from flight data is discussed. Some of the major conclusions for the simulated example are also developed for the analysis of flight data from the F-14, highly maneuverable aircraft technology (HiMAT), and space shuttle vehicles.

  20. Correlations for viscosity of kraft black liquors at low solids concentrations

    SciTech Connect

    Zaman, A.A.; Fricke, A. . Dept. of Chemical Engineering)

    1994-01-01

    The kinematic viscosities of several kraft black liquors from a two-level, four-variables, factorial-designed experiments for pulping slash pine were determined for solids concentrations from 10 to 50% and temperatures up to 80 C by glass capillary methods. The four pulping variables were cooking time, cooking temperature, sulfidity, and effective alkali. Relationships between temperature and kinematic viscosity have been developed by using free volume and absolute rate theories. The results from these two methods have been compared and discussed. A reduced variables method for dilute polymer solutions was used to correlate the viscosity with the combined effect of temperature and solids concentration. The viscosity of black liquor is an important parameter in the design and performance of kraft recovery systems. The energy efficiency will be increased by firing black liquors at higher solids concentrations. To evaporate the liquor most efficiently and to achieve higher concentrations, knowledge of viscosity over a wide range of temperatures and solids concentrations is essential. The purpose of this study is to evaluate the utility of various fundamentally based models for correlating viscosity data of black liquors as a function of temperature and concentration of nonvolatile components in the region in which the liquors behave a Newtonian fluids.

  1. Fuel nitrogen release during black liquor pyrolysis; Part 1: Laboratory measurements at different conditions

    SciTech Connect

    Aho, K.; Vakkilainen, E. ); Hupa, M. . Chemical Engineering Dept.)

    1994-05-01

    Fuel nitrogen release during black liquor pyrolysis is high. There is only minor release during the drying stage. Ammonia is the main fixed nitrogen species formed. The rate of fixed nitrogen release increases with increasing temperature. The level of fixed nitrogen released by birch liquor is almost twice the level for pine liquor. Assuming complete conversion to NO, fixed nitrogen yields gave NO concentrations near typically measured values for flue gases in full scale recovery boilers. The purpose of this work was to gain more detailed information about the behavior of the fuel nitrogen in black liquor combustion. The work focused on the pyrolysis or devolatilization of the combustion process. Devolatilization is the stage at which the majority (typically 50--80%) of the liquor organics release from a fuel particle or droplet as gaseous species due to the rapid destruction of the organic macromolecules in the liquor. In this paper, the authors use the terms devolatilization and pyrolysis interchangeably with no difference in their meaning.

  2. Feasibility of disposing waste glyphosate neutralization liquor with cement rotary kiln.

    PubMed

    Bai, Y; Bao, Y B; Cai, X L; Chen, C H; Ye, X C

    2014-08-15

    The waste neutralization liquor generated during the glyphosate production using glycine-dimethylphosphit process is a severe pollution problem due to its high salinity and organic components. The cement rotary kiln was proposed as a zero discharge strategy of disposal. In this work, the waste liquor was calcinated and the mineralogical phases of residue were characterized by scanning electron microscope (SEM) and X-ray diffraction (XRD). The mineralogical phases and the strength of cement clinker were characterized to evaluate the influence to the products. The burnability of cement raw meal added with waste liquor and the calorific value of waste liquor were tested to evaluate the influence to the thermal state of the kiln system. The results showed that after the addition of this liquor, the differences of the main phases and the strength of cement clinker were negligible, the burnability of raw meal was improved; and the calorific value of this liquor was 6140 J/g, which made it could be considered as an alternative fuel during the actual production.

  3. Feasibility of disposing waste glyphosate neutralization liquor with cement rotary kiln.

    PubMed

    Bai, Y; Bao, Y B; Cai, X L; Chen, C H; Ye, X C

    2014-08-15

    The waste neutralization liquor generated during the glyphosate production using glycine-dimethylphosphit process is a severe pollution problem due to its high salinity and organic components. The cement rotary kiln was proposed as a zero discharge strategy of disposal. In this work, the waste liquor was calcinated and the mineralogical phases of residue were characterized by scanning electron microscope (SEM) and X-ray diffraction (XRD). The mineralogical phases and the strength of cement clinker were characterized to evaluate the influence to the products. The burnability of cement raw meal added with waste liquor and the calorific value of waste liquor were tested to evaluate the influence to the thermal state of the kiln system. The results showed that after the addition of this liquor, the differences of the main phases and the strength of cement clinker were negligible, the burnability of raw meal was improved; and the calorific value of this liquor was 6140 J/g, which made it could be considered as an alternative fuel during the actual production. PMID:25010454

  4. Recovery of Flavonoids from Orange Press Liquor by an Integrated Membrane Process

    PubMed Central

    Cassano, Alfredo; Conidi, Carmela; Ruby-Figueroa, René

    2014-01-01

    Orange press liquor is a by-product generated by the citrus processing industry containing huge amounts of natural phenolic compounds with recognized antioxidant activity. In this work, an integrated membrane process for the recovery of flavonoids from orange press liquors was investigated on a laboratory scale. The liquor was previously clarified by ultrafiltration (UF) in selected operating conditions by using hollow fiber polysulfone membranes. Then, the clarified liquor with a total soluble solids (TSS) content of 10 g·100 g−1 was pre-concentrated by nanofiltration (NF) up to 32 g TSS 100 g−1 by using a polyethersulfone spiral-wound membrane. A final concentration step, up to 47 g TSS 100 g−1, was performed by using an osmotic distillation (OD) apparatus equipped with polypropylene hollow fiber membranes. Suspended solids were completely removed in the UF step producing a clarified liquor containing most part of the flavonoids of the original press liquor due to the low rejection of the UF membrane towards these compounds. Flavanones and anthocyanins were highly rejected by the NF membrane, producing a permeate stream with a TSS content of 4.5 g·100 g−1. An increasing of both the flavanones and anthocyanins concentration was observed in the NF retentate by increasing the volume reduction factor (VRF). The final concentration of flavonoids by OD produced a concentrated solution of interest for nutraceutical and pharmaceutical applications. PMID:25116725

  5. Recovery of flavonoids from orange press liquor by an integrated membrane process.

    PubMed

    Cassano, Alfredo; Conidi, Carmela; Ruby-Figueroa, René

    2014-01-01

    Orange press liquor is a by-product generated by the citrus processing industry containing huge amounts of natural phenolic compounds with recognized antioxidant activity. In this work, an integrated membrane process for the recovery of flavonoids from orange press liquors was investigated on a laboratory scale. The liquor was previously clarified by ultrafiltration (UF) in selected operating conditions by using hollow fiber polysulfone membranes. Then, the clarified liquor with a total soluble solids (TSS) content of 10 g·100 g-1 was pre-concentrated by nanofiltration (NF) up to 32 g TSS 100 g-1 by using a polyethersulfone spiral-wound membrane. A final concentration step, up to 47 g TSS 100 g-1, was performed by using an osmotic distillation (OD) apparatus equipped with polypropylene hollow fiber membranes. Suspended solids were completely removed in the UF step producing a clarified liquor containing most part of the flavonoids of the original press liquor due to the low rejection of the UF membrane towards these compounds. Flavanones and anthocyanins were highly rejected by the NF membrane, producing a permeate stream with a TSS content of 4.5 g·100 g-1. An increasing of both the flavanones and anthocyanins concentration was observed in the NF retentate by increasing the volume reduction factor (VRF). The final concentration of flavonoids by OD produced a concentrated solution of interest for nutraceutical and pharmaceutical applications. PMID:25116725

  6. Alternative jet aircraft fuels

    NASA Technical Reports Server (NTRS)

    Grobman, J.

    1979-01-01

    Potential changes in jet aircraft fuel specifications due to shifts in supply and quality of refinery feedstocks are discussed with emphasis on the effects these changes would have on the performance and durability of aircraft engines and fuel systems. Combustion characteristics, fuel thermal stability, and fuel pumpability at low temperature are among the factors considered. Combustor and fuel system technology needs for broad specification fuels are reviewed including prevention of fuel system fouling and fuel system technology for fuels with higher freezing points.

  7. 21 CFR 880.5740 - Suction snakebite kit.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Suction snakebite kit. 880.5740 Section 880.5740 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES GENERAL HOSPITAL AND PERSONAL USE DEVICES General Hospital and Personal Use Therapeutic Devices § 880.5740 Suction snakebite kit....

  8. Music Makes the Difference: Action Kit for Music Education.

    ERIC Educational Resources Information Center

    Music Educators National Conference, Reston, VA.

    This kit provides information on campaigning to increase the study of music in local schools and communities. The kit includes: (1) a "how-to" manual with worksheets, sample letters, and reproducible materials; (2) videotapes to help present your case to different audiences - "Let's Make Music" and "School Music and 'Reverse Economics'"; (3)…

  9. Serials Control and Deselection Projects. SPEC Kit 147.

    ERIC Educational Resources Information Center

    Association of Research Libraries, Washington, DC. Office of Management Studies.

    This Systems and Procedures Exchange Center (SPEC) Kit on serials control and deselection projects provides a timely review of the efforts of research libraries to control the increasing costs of serial subscriptions. This kit contains documents from 13 libraries: University of California at Los Angeles and Riverside; Universities of Florida,…

  10. 14 CFR 1214.603 - Official Flight Kit (OFK).

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 5 2011-01-01 2010-01-01 true Official Flight Kit (OFK). 1214.603 Section 1214.603 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION SPACE FLIGHT Mementos Aboard Space Shuttle Flights § 1214.603 Official Flight Kit (OFK). (a) Purpose. The OFK on a...

  11. 14 CFR 1214.603 - Official Flight Kit (OFK).

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 5 2012-01-01 2012-01-01 false Official Flight Kit (OFK). 1214.603 Section 1214.603 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION SPACE FLIGHT Mementos Aboard Space Shuttle Flights § 1214.603 Official Flight Kit (OFK). (a) Purpose. The OFK on a...

  12. 14 CFR 1214.603 - Official Flight Kit (OFK).

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 5 2013-01-01 2013-01-01 false Official Flight Kit (OFK). 1214.603 Section 1214.603 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION SPACE FLIGHT Mementos Aboard Space Shuttle Flights § 1214.603 Official Flight Kit (OFK). (a) Purpose. The OFK on a...

  13. Computer-Based Assessment of Cognition: The ETS Factor Kit.

    ERIC Educational Resources Information Center

    Ekstrom, Ruth B.; Bejar, Isaac I.

    The history of the Educational Testing Service (ETS) Factor Kits is summarized. The original ETS Factor Kit was developed in 1954 and contained 51 items, three each for each of 15 factors and six for a 16th factor. The next edition was developed in 1963 and included adaptations (clones) of the defining tests instead of the exact copies. These…

  14. A Survival Kit for Teaching English to Refugees. TECHNIQUES.

    ERIC Educational Resources Information Center

    Overbeck, Carla

    1984-01-01

    Adult basic education and English as a second language teachers, as well as volunteer tutors, can help new refugees acquire functional English through the use of a survival kit. The Literacy Volunteers of America's guide to teaching conversational English recommends these items for a survival kit: a written copy of student's name, address, and…

  15. TQAP for Verification of Qualitative Lead Test Kits

    EPA Science Inventory

    There are lead-based paint test kits available to help home owners and contractors identify lead-based paint hazards before any Renovation, Repair, and Painting (RRP) activities take place so that proper health and safety meaures can be enacted. However, many of these test kits ...

  16. 14 CFR § 1214.603 - Official Flight Kit (OFK).

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 5 2014-01-01 2014-01-01 false Official Flight Kit (OFK). § 1214.603 Section § 1214.603 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION SPACE FLIGHT Mementos Aboard Space Shuttle Flights § 1214.603 Official Flight Kit (OFK). (a) Purpose. The OFK on...

  17. Tickle Your Appetite: Team Nutrition's Education Kit for Child Care.

    ERIC Educational Resources Information Center

    Food and Consumer Service (USDA), Washington, DC.

    Adapted for child care and Head Start providers, this educator's kit contains activities and information to improve nutrition experiences for preschool-age children. In addition to the educator's guide, the kit includes a short videotape and audiotape with three segments that teach about trying different types of foods; about the taste, touch, and…

  18. 21 CFR 868.5140 - Anesthesia conduction kit.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Anesthesia conduction kit. 868.5140 Section 868.5140 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5140 Anesthesia conduction kit....

  19. 21 CFR 868.1100 - Arterial blood sampling kit.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Arterial blood sampling kit. 868.1100 Section 868.1100 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Diagnostic Devices § 868.1100 Arterial blood sampling kit....

  20. 21 CFR 868.1100 - Arterial blood sampling kit.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Arterial blood sampling kit. 868.1100 Section 868.1100 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Diagnostic Devices § 868.1100 Arterial blood sampling kit....

  1. 21 CFR 868.1100 - Arterial blood sampling kit.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Arterial blood sampling kit. 868.1100 Section 868.1100 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Diagnostic Devices § 868.1100 Arterial blood sampling kit....

  2. 21 CFR 868.5140 - Anesthesia conduction kit.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Anesthesia conduction kit. 868.5140 Section 868.5140 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5140 Anesthesia conduction kit....

  3. 21 CFR 868.1100 - Arterial blood sampling kit.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Arterial blood sampling kit. 868.1100 Section 868.1100 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Diagnostic Devices § 868.1100 Arterial blood sampling kit....

  4. 21 CFR 868.1100 - Arterial blood sampling kit.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Arterial blood sampling kit. 868.1100 Section 868.1100 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Diagnostic Devices § 868.1100 Arterial blood sampling kit....

  5. 21 CFR 868.5140 - Anesthesia conduction kit.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Anesthesia conduction kit. 868.5140 Section 868.5140 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5140 Anesthesia conduction kit....

  6. 21 CFR 872.3570 - OTC denture repair kit.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false OTC denture repair kit. 872.3570 Section 872.3570 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3570 OTC denture repair kit. (a)...

  7. 21 CFR 872.3570 - OTC denture repair kit.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false OTC denture repair kit. 872.3570 Section 872.3570 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3570 OTC denture repair kit. (a)...

  8. 21 CFR 872.3600 - Partially fabricated denture kit.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Partially fabricated denture kit. 872.3600 Section 872.3600 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3600 Partially fabricated denture kit....

  9. 21 CFR 872.3600 - Partially fabricated denture kit.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Partially fabricated denture kit. 872.3600 Section 872.3600 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3600 Partially fabricated denture kit....

  10. Indoor Air Quality Tools for Schools Action Kit. Second Edition.

    ERIC Educational Resources Information Center

    Environmental Protection Agency, Washington, DC.

    This kit contains materials to assist a school indoor air quality (IAQ) coordinator in conducting a school IAQ program. The kit contains the following: IAQ coordinator's guide; IAQ coordinator forms; IAQ backgrounder; teacher's classroom checklist; administrative staff checklist; health officer/school nurse checklist; ventilation checklist and…

  11. Energy Education Incentives: Evaluating the Impact of Consumer Energy Kits

    ERIC Educational Resources Information Center

    Kirby, Sarah D.; Guin, Autumn; Langham, Laura

    2015-01-01

    Measuring the energy and environmental impact of residential energy education efforts is difficult. The E-Conservation residential energy management program uses consumer energy kits to document the impact of energy-efficient improvements. The consumer energy kit provides an incentive for individuals attending energy education workshop, helps…

  12. 14 CFR 1214.604 - Personal Preference Kit (PPK).

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Personal Preference Kit (PPK). 1214.604 Section 1214.604 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION SPACE FLIGHT Mementos Aboard Space Shuttle Flights § 1214.604 Personal Preference Kit (PPK). (a) Purpose. The PPK...

  13. Crystal Model Kits for Use in the General Chemistry Laboratory.

    ERIC Educational Resources Information Center

    Kildahl, Nicholas J.; And Others

    1986-01-01

    Dynamic crystal model kits are described. Laboratory experiments in which students use these kits to build models have been extremely successful in providing them with an understanding of the three-dimensional structures of the common cubic unit cells as well as hexagonal and cubic closest-packing of spheres. (JN)

  14. The Allocation of Materials Funds. SPEC Kit 36.

    ERIC Educational Resources Information Center

    Association of Research Libraries, Washington, DC. Office of Management Studies.

    This Association of Research Libraries (ARL) kit contains source documents providing information on the general background, statistics/criteria, formulas, and decision-making processes used in the allocation of materials funds in academic libraries. The kit comprises: (1) a working paper on "Guidelines for the Allocation of Library Materials…

  15. Neutral Buoyancy Simulator - Fluid line repair kit development

    NASA Technical Reports Server (NTRS)

    1997-01-01

    Marshall's Neutral Buoyancy Simulator (NBS) is used to simulate the gravitational fields and buoyancy effects outer space has on astronauts and their ability to perform tasks in this environment. In this example, a diver performs a temporary fluid line repair task using a repair kit developed by Marshall engineers. The analysis will determine the value of this repair kit and its feasibility.

  16. Determining Indirect Cost Rates in Research Libraries. SPEC Kit 34.

    ERIC Educational Resources Information Center

    Association of Research Libraries, Washington, DC. Office of Management Studies.

    This kit prepared by the Association of Research Libraries (ARL) contains 15 primary source documents on determining indirect cost rates in research libraries. The kit comprises: (1) six library cost studies and surveys, "Allocation of Library Expenditures to Research and Instruction" (University of Pennsylvania), "Sampling of Current Monograph…

  17. 21 CFR 880.5740 - Suction snakebite kit.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Suction snakebite kit. 880.5740 Section 880.5740 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES GENERAL HOSPITAL AND PERSONAL USE DEVICES General Hospital and Personal Use Therapeutic Devices § 880.5740 Suction snakebite kit....

  18. Implementing and Assessing 4-H Educational Activity Kits for Children

    ERIC Educational Resources Information Center

    Scheer, Scott D.; Yeske, Janine; Zimmer, Bruce

    2011-01-01

    Educational activity kits were developed and implemented through a statewide effort for 4-H Youth Development Extension programs serving 5-8 year-old children. The purpose of the kits was to promote life skills in children and assess the learning environment. Data was collected based on the observations of 577 children across 22 counties. Findings…

  19. Disruption of c-Kit Signaling in Kit(W-sh/W-sh) Growing Mice Increases Bone Turnover.

    PubMed

    Lotinun, Sutada; Krishnamra, Nateetip

    2016-01-01

    c-Kit tyrosine kinase receptor has been identified as a regulator of bone homeostasis. The c-Kit loss-of-function mutations in WBB6F1/J-Kit(W/W-v) mice result in low bone mass. However, these mice are sterile and it is unclear whether the observed skeletal phenotype is secondary to a sex hormone deficiency. In contrast, C57BL/6J-Kit(W-sh)/(W-sh) (W(sh)/W(sh)) mice, which carry an inversion mutation affecting the transcriptional regulatory elements of the c-Kit gene, are fertile. Here, we showed that W(sh)/W(sh) mice exhibited osteopenia with elevated bone resorption and bone formation at 6- and 9-week-old. The c-Kit W(sh) mutation increased osteoclast differentiation, the number of committed osteoprogenitors, alkaline phosphatase activity and mineralization. c-Kit was expressed in both osteoclasts and osteoblasts, and c-Kit expression was decreased in W(sh)/W(sh)osteoclasts, but not osteoblasts, suggesting an indirect effect of c-Kit on bone formation. Furthermore, the osteoclast-derived coupling factor Wnt10b mRNA was increased in W(sh)/W(sh) osteoclasts. Conditioned medium from W(sh)/W(sh) osteoclasts had elevated Wnt10b protein levels and induced increased alkaline phosphatase activity and mineralization in osteoblast cultures. Antagonizing Wnt10b signaling with DKK1 or Wnt10b antibody inhibited these effects. Our data suggest that c-Kit negatively regulates bone turnover, and disrupted c-Kit signaling couples increased bone resorption with bone formation through osteoclast-derived Wnt 10 b. PMID:27527615

  20. Disruption of c-Kit Signaling in KitW-sh/W-sh Growing Mice Increases Bone Turnover

    PubMed Central

    Lotinun, Sutada; Krishnamra, Nateetip

    2016-01-01

    c-Kit tyrosine kinase receptor has been identified as a regulator of bone homeostasis. The c-Kit loss-of-function mutations in WBB6F1/J-KitW/W-v mice result in low bone mass. However, these mice are sterile and it is unclear whether the observed skeletal phenotype is secondary to a sex hormone deficiency. In contrast, C57BL/6J-KitW-sh/W-sh (Wsh/Wsh) mice, which carry an inversion mutation affecting the transcriptional regulatory elements of the c-Kit gene, are fertile. Here, we showed that Wsh/Wsh mice exhibited osteopenia with elevated bone resorption and bone formation at 6- and 9-week-old. The c-Kit Wsh mutation increased osteoclast differentiation, the number of committed osteoprogenitors, alkaline phosphatase activity and mineralization. c-Kit was expressed in both osteoclasts and osteoblasts, and c-Kit expression was decreased in Wsh/Wshosteoclasts, but not osteoblasts, suggesting an indirect effect of c-Kit on bone formation. Furthermore, the osteoclast-derived coupling factor Wnt10b mRNA was increased in Wsh/Wsh osteoclasts. Conditioned medium from Wsh/Wsh osteoclasts had elevated Wnt10b protein levels and induced increased alkaline phosphatase activity and mineralization in osteoblast cultures. Antagonizing Wnt10b signaling with DKK1 or Wnt10b antibody inhibited these effects. Our data suggest that c-Kit negatively regulates bone turnover, and disrupted c-Kit signaling couples increased bone resorption with bone formation through osteoclast-derived Wnt 10 b. PMID:27527615

  1. Marshall Space Flight Center Telescience Resource Kit

    NASA Technical Reports Server (NTRS)

    Wade, Gina

    2016-01-01

    Telescience Resource Kit (TReK) is a suite of software applications that can be used to monitor and control assets in space or on the ground. The Telescience Resource Kit was originally developed for the International Space Station program. Since then it has been used to support a variety of NASA programs and projects including the WB-57 Ascent Vehicle Experiment (WAVE) project, the Fast Affordable Science and Technology Satellite (FASTSAT) project, and the Constellation Program. The Payloads Operations Center (POC), also known as the Payload Operations Integration Center (POIC), provides the capability for payload users to operate their payloads at their home sites. In this environment, TReK provides local ground support system services and an interface to utilize remote services provided by the POC. TReK provides ground system services for local and remote payload user sites including International Partner sites, Telescience Support Centers, and U.S. Investigator sites in over 40 locations worldwide. General Capabilities: Support for various data interfaces such as User Datagram Protocol, Transmission Control Protocol, and Serial interfaces. Data Services - retrieve, process, record, playback, forward, and display data (ground based data or telemetry data). Command - create, modify, send, and track commands. Command Management - Configure one TReK system to serve as a command server/filter for other TReK systems. Database - databases are used to store telemetry and command definition information. Application Programming Interface (API) - ANSI C interface compatible with commercial products such as Visual C++, Visual Basic, LabVIEW, Borland C++, etc. The TReK API provides a bridge for users to develop software to access and extend TReK services. Environments - development, test, simulations, training, and flight. Includes standalone training simulators.

  2. Lack of Evidence Supporting the Effectiveness of Disaster Supply Kits.

    PubMed

    Heagele, Tara N

    2016-06-01

    We reviewed the available evidence in support of the effectiveness of disaster supply kits presently used in household emergency preparedness in the United States. The expectation that people should take responsibility for their own disaster preparedness has largely not taken into account contextual influences on disaster preparedness. The efficiency of current disaster supply kits used during critical postdisaster periods has not been empirically tested. Professional recommendations regarding the composition of disaster supply kits containing at least water, food, first aid, hygiene, and clothing have not been universally defined. This lack of consensus may lead to the assembling of disaster supply kits yielding suboptimal results. The use of disaster supply kits should continue to be nationally recommended, although additional research is needed to demonstrate their beneficial impact on survival and resilience after a disaster. PMID:27077362

  3. C-Kit-Negative Gastrointestinal Stromal Tumor in the Stomach

    PubMed Central

    Seo, Ho Seok; Hyeon, Ji Yeon; Shin, Ok-Ran

    2015-01-01

    C-kit-negative gastrointestinal stromal tumors (GISTs) are uncommon, and there have been few reports about the diagnosis and treatment of c-kit-negative GISTs in the stomach. We report the case of a patient who was diagnosed with a huge and atypical GIST in the stomach. The GIST was completely resected and finally diagnosed as c-kit-negative GIST based on immunohistochemical staining of tumor cells, which were negative for CD117 and CD34 and positive for Discovered on GIST-1 (DOG1). C-kit-negative GISTs could be treated by complete resection and/or imatinib, which is the same treatment for c-kit-positive GISTs. PMID:26819809

  4. Effect of pulsation on black liquor gasification. Final report

    SciTech Connect

    Zinn, B.T.; Jagoda, J.; Jeong, H.; Kushari, A.; Rosen, L.J.

    1998-12-01

    Pyrolysis is an endothermic process. The heat of reaction is provided either by partial combustion of the waste or by heat transfer from an external combustion process. In one proposed system black liquor is pyrolized in a fluidized bed to which heat is added through a series of pulse combustor tail pipes submerged in the bed material. This system appears promising because of the relatively high heat transfer in pulse combustors and in fluidized beds. Other advantages of pulse combustors are discussed elsewhere. The process is, however, only economically viable if a part of the pyrolysis products can be used to fire the pulse combustors. The overall goals of this study were to determine: (1) which is the limiting heat transfer rate in the process of transferring heat from the hot combustion products to the pipe, through the pipe, from the tail pipe to the bed and through the bed; i.e., whether increased heat transfer within the pulse combustor will significantly increase the overall heat transfer rate; (2) whether the heat transfer benefits of the pulse combustor can be utilized while maintaining the temperature in the bed within the narrow temperature range required by the process without generating hot spots in the bed; and (3) whether the fuel gas produced during the gasification process can be used to efficiently fire the pulse combustor.

  5. Improved Materials for High-Temperature Black Liquor Gasification

    SciTech Connect

    Keiser, J.R.; Hemrick, J.G.; Gorog, J.P.; Leary, R.

    2006-06-29

    with fusion-cast magnesia-alumina spinel refractory, which appears to be the most resistant to degradation found to date, exhibiting over a year of service life and expected to be capable of over two years of service life. Regarding the use of refractory mortar, it was found that expansion of the current chrome-alumina mortar when subjected to black liquor smelt is likely contributing to the strains seen on the vessel shell. Additionally, the candidate high-alumina mortar that was originally proposed as a replacement for the current chrome-alumina mortar also showed a large amount of expansion when subjected to molten smelt. A UMR experimental mortar, composed of a phosphate bonded system specifically designed for use with fusion-cast magnesium-aluminum spinel, was found to perform well in the molten smelt environment. Strain gauges installed on the gasifier vessel shell provided valuable information about the expansion of the refractory, and a new set of strain gauges and thermocouples has been installed in order to monitor the loading caused by the currently installed spinel refractory. These results provide information for a direct comparison of the expansion of the two refractories. Measurements to date suggest that the fusion-cast magnesia-alumina spinel is expanding less than the fusion-cast {alpha}/{beta}-alumina used previously. A modified liquor nozzle was designed and constructed to test a number of materials that should be more resistant to erosion and corrosion than the material currently used. Inserts made of three erosion-resistant metallic materials were fabricated, along with inserts made of three ceramic materials. The assembled system was sent to the New Bern mill for installation in the gasifer in 2005. Following operation of the gasifier using the modified nozzle, inserts should be removed and analyzed for wear by erosion/corrosion. Although no materials have been directly identified for sensor/thermocouple protection tubes, several of the

  6. Maleic acid treatment of biologically detoxified corn stover liquor.

    PubMed

    Kim, Daehwan; Ximenes, Eduardo A; Nichols, Nancy N; Cao, Guangli; Frazer, Sarah E; Ladisch, Michael R

    2016-09-01

    Elimination of microbial and enzyme inhibitors from pretreated lignocellulose is critical for effective cellulose conversion and yeast fermentation of liquid hot water (LHW) pretreated corn stover. In this study, xylan oligomers were hydrolyzed using either maleic acid or hemicellulases, and other soluble inhibitors were eliminated by biological detoxification. Corn stover at 20% (w/v) solids was LHW pretreated LHW (severity factor: 4.3). The 20% solids (w/v) pretreated corn stover derived liquor was recovered and biologically detoxified using the fungus Coniochaeta ligniaria NRRL30616. After maleic acid treatment, and using 5 filter paper units of cellulase/g glucan (8.3mg protein/g glucan), 73% higher cellulose conversion from corn stover was obtained for biodetoxified samples compared to undetoxified samples. This corresponded to 87% cellulose to glucose conversion. Ethanol production by yeast of pretreated corn stover solids hydrolysate was 1.4 times higher than undetoxified samples, with a reduction of 3h in the fermentation lag phase. PMID:27262718

  7. Is liquor intoxicating? Scientists, prohibition, and the normalization of drinking.

    PubMed Central

    Pauly, P J

    1994-01-01

    The reliance of current advocates of recreational drug legalization on parallels between "drug prohibition" and the repudiated experiment of National Prohibition in the 1920s invites renewed attention to the history of the legalization and normalization of drinking. A new scientific conception of the nature and effects of alcohol formed an important element in both the politics of repeal and the ensuing legitimation of alcohol consumption. The industrial toxicologist Yandell Henderson argued that alcohol should be considered analogous to carbon monoxide--clearly a poison, yet a normal part of civilized life and only problematic above a determinable and manageable exposure threshold. This argument had political force in the early 1930s as part of the contention that beer was not an "intoxicating liquor." It was more broadly persuasive because it was consistent with Americans' experience with industrial poisons, for which exposure levels had been set by toxicologists such as Henderson. This historical perspective illuminates the more recent reassessment of the risks of alcohol consumption. It also challenges the applicability of the model of the normalization of drinking to proposals to legalize cocaine and opiates. Images p307-a p309-a PMID:8296962

  8. 150 Passenger Commercial Aircraft

    NASA Technical Reports Server (NTRS)

    Bucovsky, Adrian; Romli, Fairuz I.; Rupp, Jessica

    2002-01-01

    It has been projected that the need for a short-range mid-sized, aircraft is increasing. The future strategy to decrease long-haul flights will increase the demand for short-haul flights. Since passengers prefer to meet their destinations quickly, airlines will increase the frequency of flights, which will reduce the passenger load on the aircraft. If a point-to-point flight is not possible, passengers will prefer only a one-stop short connecting flight to their final destination. A 150-passenger aircraft is an ideal vehicle for these situations. It is mid-sized aircraft and has a range of 3000 nautical miles. This type of aircraft would market U.S. domestic flights or inter-European flight routes. The objective of the design of the 150-passenger aircraft is to minimize fuel consumption. The configuration of the aircraft must be optimized. This aircraft must meet CO2 and NOx emissions standards with minimal acquisition price and operating costs. This report contains all the work that has been performed for the completion of the design of a 150 passenger commercial aircraft. The methodology used is the Technology Identification, Evaluation, and Selection (TIES) developed at Georgia Tech Aerospace Systems Design laboratory (ASDL). This is an eight-step conceptual design process to evaluate the probability of meeting the design constraints. This methodology also allows for the evaluation of new technologies to be implemented into the design. The TIES process begins with defining the problem with a need established and a market targeted. With the customer requirements set and the target values established, a baseline concept is created. Next, the design space is explored to determine the feasibility and viability of the baseline aircraft configuration. If the design is neither feasible nor viable, new technologies can be implemented to open up the feasible design space and allow for a plausible solution. After the new technologies are identified, they must be evaluated

  9. Education kits for fiber optics, optoelectronics, and optical communications

    NASA Astrophysics Data System (ADS)

    Hájek, Martin; Švrček, Miroslav

    2007-04-01

    Our company MIKROKOM, s.r.o. is engaged for many years in development of education equipment and kits for fiber optics, optoelectronics and optical communications. We would like to inform competitors of conference about results of this long-time development. Requirements on education kits and equipment in a modern and dynamic area as is optical communications and fiber optics are quite difficult. The education kits should to clearly introduce students to given issue - the most important physical principles and technical approaches, but it should to introduce also to new and modern technologies, which are quickly changing and developing. On the other hand should be these tools and kits reasonable for the schools. In our paper we would like to describe possible ways of development of this education kits and equipment and present our results of long-time work, which covers very wide range. On the one hand we developed equipment and kits for clear demonstration of physical effects using plastic optical fibers POF, next we prepare kits with a glass fibers, which are the most used fibers in practice and after as much as the kits, which covers broad range of passive and active elements of the optical networks and systems and which makes possible to create complex optical transmission connection. This kind of systems with using corresponding tools and equipment introduce the students to properties, manipulation, measurement and usage of optical fibers, traces and many active and passive components. Furthermore, with using different sorts of optical sources, photodetectors, fiber optics couplers etc., students can get acquainted with all optoelectronics transmission system, which uses different sorts of signals. Special part will be devoted also to effort mentioned before - to implement modern technologies such as e.g. Wavelength Division Multiplex (WDM) into the education kits. Our presentation will inform auditors about development of mentioned education kits and

  10. Oncogenic c-kit transcript is a target for binase.

    PubMed

    Mitkevich, Vladimir A; Petrushanko, Irina Y; Kretova, Olga V; Zelenikhin, Pavel V; Prassolov, Vladimir S; Tchurikov, Nickolai A; Ilinskaya, Olga N; Makarov, Alexander A

    2010-07-01

    Mutational activation of c-Kit receptor tyrosine kinase is common in acute myelogenous leukemia (AML). One such activating point mutation is the N822K replacement in the c-Kit protein. Here we investigate the selective cytotoxic effect of binase--RNase from Bacillus intermedius--on FDC-P1-N822K cells. These cells were derived from myeloid progenitor FDC-P1 cells, in which ectopic expression of N822K c-kit gene induces interleukin-3 independent growth. In order to determine whether the sensitivity of these cells to binase is caused by the expression of c-kit oncogene, the cytotoxicity of the RNase was studied in the presence of selective inhibitor of mutated c-Kit imatinib (Gleevec). Inhibition of mutated c-Kit protein leads to the loss of cell sensitivity to the apoptotic effect of binase, while the latter still decreases the amount of cellular RNA. Using green fluorescent protein as an expression marker for the c-Kit oncoprotein, we demonstrate that the elimination of c-Kit is the key factor in selective cytotoxicity of binase. Quantitative RT-PCR with RNA samples isolated from the binase-treated FDC-P1-N822K cells shows that binase treatment results in 41% reduction in the amount of с-kit mRNA. This indicates that the transcript of the activated mutant c-kit is the target for toxic action of binase. Thus, the combination of inhibition of oncogenic protein with the destruction of its mRNA is a promising approach to eliminating malignant cells.

  11. Mill Integration-Pulping, Stream Reforming and Direct Causticization for Black Liquor Recovery

    SciTech Connect

    Adriaan van Heiningen

    2007-06-30

    MTCI/StoneChem developed a steam reforming, fluidized bed gasification technology for biomass. DOE supported the demonstration of this technology for gasification of spent wood pulping liquor (or 'black liquor') at Georgia-Pacific's Big Island, Virginia mill. The present pre-commercial R&D project addressed the opportunities as well as identified negative aspects when the MTCI/StoneChem gasification technology is integrated in a pulp mill production facility. The opportunities arise because black liquor gasification produces sulfur (as H{sub 2}S) and sodium (as Na{sub 2}CO{sub 3}) in separate streams which may be used beneficially for improved pulp yield and properties. The negative aspect of kraft black liquor gasification is that the amount of Na{sub 2}CO{sub 3} which must be converted to NaOH (the so called causticizing requirement) is increased. This arises because sulfur is released as Na{sub 2}S during conventional kraft black liquor recovery, while during gasification the sodium associated Na{sub 2}S is partly or fully converted to Na{sub 2}CO{sub 3}. The causticizing requirement can be eliminated by including a TiO{sub 2} based cyclic process called direct causticization. In this process black liquor is gasified in the presence of (low sodium content) titanates which convert Na{sub 2}CO{sub 3} to (high sodium content) titanates. NaOH is formed when contacting the latter titanates with water, thereby eliminating the causticizing requirement entirely. The leached and low sodium titanates are returned to the gasification process. The project team comprised the University of Maine (UM), North Carolina State University (NCSU) and MTCI/ThermoChem. NCSU and MTCI are subcontractors to UM. The principal organization for the contract is UM. NCSU investigated the techno-economics of using advanced pulping techniques which fully utilize the unique cooking liquors produced by steam reforming of black liquor (Task 1). UM studied the kinetics and agglomeration problems of

  12. Optical properties of black liquor and refractometric methods for monitoring the solid residue concentration in sulfate cellulose production

    NASA Astrophysics Data System (ADS)

    Belov, N. P.; Lapshov, S. N.; Mayorov, E. E.; Sherstobitova, A. S.; Yaskov, A. D.

    2012-07-01

    Measurements of the refractive index, its temperature dependence, and the optical transmission of black liquors produced during sulfate pulping are reported for soluble solid residue concentrations up to k ≅ 60 %. The design features of a commercial refractometer for monitoring the concentration of black liquor are examined briefly. A procedure is proposed for laboratory calibration of commercial sensors that employs black liquor solutions in highly refractive organic liquids as reference samples.

  13. Effects of cacao liquor polyphenols on cardiovascular and autonomic nervous functions in hypercholesterolaemic rabbits.

    PubMed

    Akita, Megumi; Kuwahara, Masayoshi; Itoh, Fumi; Nakano, Yoshihisa; Osakabe, Naomi; Kurosawa, Tohru; Tsubone, Hirokazu

    2008-12-01

    Many epidemiological studies have shown that polyphenols can reduce the risk of mortality from cardiovascular diseases. This study tested the hypothesis that cacao liquor polyphenols have the properties to restore the cardiovascular and autonomic nervous function in an animal model of familial hypercholesterolaemia. Male Kurosawa and Kusanagi-hypercholesterolaemic rabbits were housed in individual cages in a room where a 12-hr light:dark cycle (lights-on at 8:00 and lights-off at 20:00) was maintained. At 3 months of age, they were divided into two groups (standard diet and cacao liquor polyphenol) and the animals received 100 g of the respective diets per day and were provided with tap water ad libitum. Heart rate and blood pressure were measured by a telemetry system. To clarify the autonomic nervous function, power spectral analysis of heart rate variability, baroreflex sensitivity and autonomic nervous tone were measured. After 6 months of dietary administration of cacao liquor polyphenols, heart rate and blood pressure were lowered but plasma lipid concentrations were unchanged. The area of atherosclerotic lesions in the aorta in the cacao liquor polyphenol group was significantly smaller than that in the standard diet group. The high-frequency power of heart rate variability in the rabbits in the standard diet group was significantly decreased with ageing, but that in the cacao liquor polyphenol group was not different between short-term and long-term treatment. Moreover, cacao liquor polyphenols preserved parasympathetic nervous tone, although that in the standard diet group was significantly decreased with ageing. We conclude that cacao liquor polyphenols may play an important role to protect cardiovascular and autonomic nervous functions.

  14. IDENTIFICATION OF AIRCRAFT HAZARDS

    SciTech Connect

    K.L. Ashley

    2005-03-23

    Aircraft hazards were determined to be potentially applicable to a repository at Yucca Mountain in the ''Monitored Geological Repository External Events Hazards Screening Analysis'' (BSC 2004, Section 6.4.1). That determination was conservatively based on limited knowledge of flight data in the area of concern and on crash data for aircraft of the type flying near Yucca Mountain. The purpose of this report is to identify specific aircraft hazards that may be applicable to a Monitored Geologic Repository (MGR) at Yucca Mountain using NUREG-0800, ''Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants'' (NRC 1987, Section 3.5.1.6), as guidance for the inclusion or exclusion of identified aircraft hazards. NUREG-0800 is being used here as a reference because some of the same considerations apply. The intended use of this report is to provide inputs for further screening and analysis of the identified aircraft hazards based on the criteria that apply to Category 1 and 2 event sequence analyses as defined in 10 CFR 63.2 (see Section 4). The scope of this technical report includes the evaluation of military, private, and commercial use of airspace in the 100-mile regional setting of the MGR at Yucca Mountain with the potential for reducing the regional setting to a more manageable size after consideration of applicable screening criteria (see Section 7).

  15. High altitude reconnaissance aircraft

    NASA Technical Reports Server (NTRS)

    Yazdo, Renee Anna; Moller, David

    1990-01-01

    At the equator the ozone layer ranges from 65,000 to 130,000 plus feet, which is beyond the capabilities of the ER-2, NASA's current high altitude reconnaissance aircraft. The Universities Space Research Association, in cooperation with NASA, is sponsoring an undergraduate program which is geared to designing an aircraft that can study the ozone layer at the equator. This aircraft must be able to cruise at 130,000 feet for six hours at Mach 0.7, while carrying 3,000 lbs. of payload. In addition, the aircraft must have a minimum range of 6,000 miles. In consideration of the novel nature of this project, the pilot must be able to take control in the event of unforeseen difficulties. Three aircraft configurations were determined to be the most suitable - a joined-wing, a biplane, and a twin-boom conventional airplane. The performance of each configuration was analyzed to investigate the feasibility of the project.

  16. Aircraft control position indicator

    NASA Technical Reports Server (NTRS)

    Dennis, Dale V. (Inventor)

    1987-01-01

    An aircraft control position indicator was provided that displayed the degree of deflection of the primary flight control surfaces and the manner in which the aircraft responded. The display included a vertical elevator dot/bar graph meter display for indication whether the aircraft will pitch up or down, a horizontal aileron dot/bar graph meter display for indicating whether the aircraft will roll to the left or to the right, and a horizontal dot/bar graph meter display for indicating whether the aircraft will turn left or right. The vertical and horizontal display or displays intersect to form an up/down, left/right type display. Internal electronic display driver means received signals from transducers measuring the control surface deflections and determined the position of the meter indicators on each dot/bar graph meter display. The device allows readability at a glance, easy visual perception in sunlight or shade, near-zero lag in displaying flight control position, and is not affected by gravitational or centrifugal forces.

  17. Aircraft noise synthesis system

    NASA Technical Reports Server (NTRS)

    Mccurdy, David A.; Grandle, Robert E.

    1987-01-01

    A second-generation Aircraft Noise Synthesis System has been developed to provide test stimuli for studies of community annoyance to aircraft flyover noise. The computer-based system generates realistic, time-varying, audio simulations of aircraft flyover noise at a specified observer location on the ground. The synthesis takes into account the time-varying aircraft position relative to the observer; specified reference spectra consisting of broadband, narrowband, and pure-tone components; directivity patterns; Doppler shift; atmospheric effects; and ground effects. These parameters can be specified and controlled in such a way as to generate stimuli in which certain noise characteristics, such as duration or tonal content, are independently varied, while the remaining characteristics, such as broadband content, are held constant. The system can also generate simulations of the predicted noise characteristics of future aircraft. A description of the synthesis system and a discussion of the algorithms and methods used to generate the simulations are provided. An appendix describing the input data and providing user instructions is also included.

  18. Aircraft Operations Classification System

    NASA Technical Reports Server (NTRS)

    Harlow, Charles; Zhu, Weihong

    2001-01-01

    Accurate data is important in the aviation planning process. In this project we consider systems for measuring aircraft activity at airports. This would include determining the type of aircraft such as jet, helicopter, single engine, and multiengine propeller. Some of the issues involved in deploying technologies for monitoring aircraft operations are cost, reliability, and accuracy. In addition, the system must be field portable and acceptable at airports. A comparison of technologies was conducted and it was decided that an aircraft monitoring system should be based upon acoustic technology. A multimedia relational database was established for the study. The information contained in the database consists of airport information, runway information, acoustic records, photographic records, a description of the event (takeoff, landing), aircraft type, and environmental information. We extracted features from the time signal and the frequency content of the signal. A multi-layer feed-forward neural network was chosen as the classifier. Training and testing results were obtained. We were able to obtain classification results of over 90 percent for training and testing for takeoff events.

  19. Identification of Aircraft Hazards

    SciTech Connect

    K. Ashley

    2006-12-08

    Aircraft hazards were determined to be potentially applicable to a repository at Yucca Mountain in ''Monitored Geological Repository External Events Hazards Screening Analysis'' (BSC 2005 [DIRS 174235], Section 6.4.1). That determination was conservatively based upon limited knowledge of flight data in the area of concern and upon crash data for aircraft of the type flying near Yucca Mountain. The purpose of this report is to identify specific aircraft hazards that may be applicable to a monitored geologic repository (MGR) at Yucca Mountain, using NUREG-0800, ''Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants'' (NRC 1987 [DIRS 103124], Section 3.5.1.6), as guidance for the inclusion or exclusion of identified aircraft hazards. The intended use of this report is to provide inputs for further screening and analysis of identified aircraft hazards based upon the criteria that apply to Category 1 and Category 2 event sequence analyses as defined in 10 CFR 63.2 [DIRS 176544] (Section 4). The scope of this report includes the evaluation of military, private, and commercial use of airspace in the 100-mile regional setting of the repository at Yucca Mountain with the potential for reducing the regional setting to a more manageable size after consideration of applicable screening criteria (Section 7).

  20. Detection of hazelnuts and almonds using commercial ELISA test kits.

    PubMed

    Garber, Eric A E; Perry, Jesse

    2010-03-01

    Three commercial sandwich enzyme-linked immunosorbent assay (ELISA) test kits for the detection of hazelnuts and almonds were evaluated. Limits of detection and dynamic ranges were determined for hazelnuts and almonds spiked into cooked oatmeal, dipping chocolate, and muffins (baked). The limit of detection values varied from 1 to 38 μg/g, depending on the food matrix and ELISA test kit. Percent recoveries based on the standards supplied with the test kits varied from 10% to 170%. It is impossible to ascertain whether the percent recoveries reflect the performance of the ELISAs or differences between the protein content of the nuts used to spike the samples and the test kit standards. Unfortunately, reference materials do not exist that can be used to compare the results from different test kits and standardize the test kit standards. Also, insufficient knowledge regarding the epitope specificity of the antibodies used in the ELISAs further hinders interpretation of the results generated by the different test kits.

  1. Aircraft icing instrumentation: Unfilled needs. [rotary wing aircraft

    NASA Technical Reports Server (NTRS)

    Kitchens, P. F.

    1980-01-01

    A list of icing instrumentation requirements are presented. Because of the Army's helicopter orientation, many of the suggestions are specific to rotary wing aircraft; however, some of the instrumentation are also suitable for general aviation aircraft.

  2. Enhanced liners for attenuating utility by-product liquors

    SciTech Connect

    Martin, W.J.; Dennison, D. )

    1990-03-01

    The enhancement of soil liners for selected inorganic solution species by improving attenuation properties neutralizing reagents was investigated. One soil type (Cole silt loam) and two coal combustion liquors (boiling cleaning waste (acidic) and water treatment system brine (alkaline)) were used in laboratory studies. These studies tested the effectiveness of the use of neutralizing reagents both as a direct solution treatment and as a neutralizing barrier in a waste impoundment. The two kinds of laboratory experiments conducted were batch experiments for assessing the reagent's effectiveness and for selecting some for further study, and column experiments to (1) investigate different reagent application techniques, (2) determine the reagent's effects on permeability, and (3) study the changes in contaminant mobility. The batch studies resulted in the selection of two cost-effective neutralizing agents, hydrated lime (Ca(OH){sub 2}) for the acidic waste and alum (Al{sub 2}(SO{sub 4}){sub 3}{center dot}8H{sub 2}O) for the alkaline waste. In the column studies, these reagents were incorporated several ways in amending a soil liner to create neutralizing barriers. The results showed that a layered combination of homogeneous amended soil over unamended soil provided the most applicable and effective barrier with acceptable permeability. Precipitation, adsorption, and bacteriological activity were the major mechanisms involved in changing contaminant mobility and permeability. Several mineralogical changes occurred during contact in both studies, although the most significant was the precipitation of iron hydroxide and aluminum hydroxide, with their subsequent adsorption of trace metals. 13 refs., 26 figs.

  3. Scaling aircraft noise perception.

    NASA Technical Reports Server (NTRS)

    Ollerhead, J. B.

    1973-01-01

    Following a brief review of the background to the study, an extensive experiment is described which was undertaken to assess the practical differences between numerous alternative methods for calculating the perceived levels of individual aircraft flyover wounds. One hundred and twenty recorded sounds, including jets, turboprops, piston aircraft and helicopters were rated by a panel of subjects in a pair comparison test. The results were analyzed to evaluate a number of noise rating procedures, in terms of their ability to accurately estimate both relative and absolute perceived noise levels over a wider dynamic range (84-115 dB SPL) than had generally been used in previous experiments. Performances of the different scales were examined in detail for different aircraft categories, and the merits of different band level summation procedures, frequency weighting functions, duration and tone corrections were investigated.

  4. Alternative aircraft fuels technology

    NASA Technical Reports Server (NTRS)

    Grobman, J.

    1976-01-01

    NASA is studying the characteristics of future aircraft fuels produced from either petroleum or nonpetroleum sources such as oil shale or coal. These future hydrocarbon based fuels may have chemical and physical properties that are different from present aviation turbine fuels. This research is aimed at determining what those characteristics may be, how present aircraft and engine components and materials would be affected by fuel specification changes, and what changes in both aircraft and engine design would be required to utilize these future fuels without sacrificing performance, reliability, or safety. This fuels technology program was organized to include both in-house and contract research on the synthesis and characterization of fuels, component evaluations of combustors, turbines, and fuel systems, and, eventually, full-scale engine demonstrations. A review of the various elements of the program and significant results obtained so far are presented.

  5. Transport aircraft accident dynamics

    NASA Technical Reports Server (NTRS)

    Cominsky, A.

    1982-01-01

    A study was carried out of 112 impact survivable jet transport aircraft accidents (world wide) of 27,700 kg (60,000 lb.) aircraft and up extending over the last 20 years. This study centered on the effect of impact and the follow-on events on aircraft structures and was confined to the approach, landing and takeoff segments of the flight. The significant characteristics, frequency of occurrence and the effect on the occupants of the above data base were studied and categorized with a view to establishing typical impact scenarios for use as a basis of verifying the effectiveness of potential safety concepts. Studies were also carried out of related subjects such as: (1) assessment of advanced materials; (2) human tolerance to impact; (3) merit functions for safety concepts; and (4) impact analysis and test methods.

  6. Emergency medical kit for commercial airlines: an update.

    PubMed

    Thibeault, Claude

    2002-06-01

    As expected, the issue of medical kits for commercial airlines continues to attract attention, especially in light of the recent United States regulation on the subject. As promised in its first recommendation in 1998, the Air Transport Medicine (ATM) Committee has continued to monitor medical kit usage as well as pharmaceutical scientific developments and wishes to propose an update to its 1998 recommendation. Lists of contents are provided for emergency medical kits of two types: 1) those without defibrillator/monitor or monitor; and 2) those with defibrillator/monitor or monitor alone. Follow up and updates on this issue will be an ongoing task of the ATM Committee.

  7. Pathfinder aircraft in flight

    NASA Technical Reports Server (NTRS)

    1996-01-01

    The Pathfinder research aircraft's solar cell arrays are prominently displayed as it touches down on the bed of Rogers Dry Lake at the Dryden Flight Research Center, Edwards, California, following a test flight. The solar arrays covered more than 75 percent of Pathfinder's upper wing surface, and provided electricity to power its six electric motors, flight controls, communications links and a host of scientific sensors. Pathfinder was a lightweight, solar-powered, remotely piloted flying wing aircraft used to demonstrate the use of solar power for long-duration, high-altitude flight. Its name denotes its mission as the 'Pathfinder' or first in a series of solar-powered aircraft that will be able to remain airborne for weeks or months on scientific sampling and imaging missions. Solar arrays covered most of the upper wing surface of the Pathfinder aircraft. These arrays provided up to 8,000 watts of power at high noon on a clear summer day. That power fed the aircraft's six electric motors as well as its avionics, communications, and other electrical systems. Pathfinder also had a backup battery system that could provide power for two to five hours, allowing for limited-duration flight after dark. Pathfinder flew at airspeeds of only 15 to 20 mph. Pitch control was maintained by using tiny elevators on the trailing edge of the wing while turns and yaw control were accomplished by slowing down or speeding up the motors on the outboard sections of the wing. On September 11, 1995, Pathfinder set a new altitude record for solar-powered aircraft of 50,567 feet above Edwards Air Force Base, California, on a 12-hour flight. On July 7, 1997, it set another, unofficial record of 71,500 feet at the Pacific Missile Range Facility, Kauai, Hawaii. In 1998, Pathfinder was modified into the longer-winged Pathfinder Plus configuration. (See the Pathfinder Plus photos and project description.)

  8. Pathfinder aircraft in flight

    NASA Technical Reports Server (NTRS)

    1996-01-01

    The unique Pathfinder solar-powered flying wing, is shown during a checkout flight from the Dryden Flight Research Center, Edwards, California. This two-hour low-altitude flight over Rogers Dry Lake, Nov. 19, 1996, served to test aircraft systems and functional procedures, according to officials of AeroVironment, Inc., Pathfinder's developer and operator. Pathfinder was a lightweight, solar-powered, remotely piloted flying wing aircraft used to demonstrate the use of solar power for long-duration, high-altitude flight. Its name denotes its mission as the 'Pathfinder' or first in a series of solar-powered aircraft that will be able to remain airborne for weeks or months on scientific sampling and imaging missions. Solar arrays covered most of the upper wing surface of the Pathfinder aircraft. These arrays provided up to 8,000 watts of power at high noon on a clear summer day. That power fed the aircraft's six electric motors as well as its avionics, communications, and other electrical systems. Pathfinder also had a backup battery system that could provide power for two to five hours, allowing for limited-duration flight after dark. Pathfinder flew at airspeeds of only 15 to 20 mph. Pitch control was maintained by using tiny elevators on the trailing edge of the wing while turns and yaw control were accomplished by slowing down or speeding up the motors on the outboard sections of the wing. On September 11, 1995, Pathfinder set a new altitude record for solar-powered aircraft of 50,567 feet above Edwards Air Force Base, California, on a 12-hour flight. On July 7, 1997, it set another, unofficial record of 71,500 feet at the Pacific Missile Range Facility, Kauai, Hawaii. In 1998, Pathfinder was modified into the longer-winged Pathfinder Plus configuration. (See the Pathfinder Plus photos and project description.)

  9. Pathfinder aircraft in flight

    NASA Technical Reports Server (NTRS)

    1996-01-01

    The Pathfinder solar-powered research aircraft heads for landing on the bed of Rogers Dry Lake at the Dryden Flight Research Center, Edwards, California, after a successful test flight Nov. 19, 1996. Pathfinder was a lightweight, solar-powered, remotely piloted flying wing aircraft used to demonstrate the use of solar power for long-duration, high-altitude flight. Its name denotes its mission as the 'Pathfinder' or first in a series of solar-powered aircraft that will be able to remain airborne for weeks or months on scientific sampling and imaging missions. Solar arrays covered most of the upper wing surface of the Pathfinder aircraft. These arrays provided up to 8,000 watts of power at high noon on a clear summer day. That power fed the aircraft's six electric motors as well as its avionics, communications, and other electrical systems. Pathfinder also had a backup battery system that could provide power for two to five hours, allowing for limited-duration flight after dark. Pathfinder flew at airspeeds of only 15 to 20 mph. Pitch control was maintained by using tiny elevators on the trailing edge of the wing while turns and yaw control were accomplished by slowing down or speeding up the motors on the outboard sections of the wing. On September 11, 1995, Pathfinder set a new altitude record for solar-powered aircraft of 50,567 feet above Edwards Air Force Base, California, on a 12-hour flight. On July 7, 1997, it set another, unofficial record of 71,500 feet at the Pacific Missile Range Facility, Kauai, Hawaii. In 1998, Pathfinder was modified into the longer-winged Pathfinder Plus configuration. (See the Pathfinder Plus photos and project description.)

  10. Pathfinder aircraft in flight

    NASA Technical Reports Server (NTRS)

    1996-01-01

    The Pathfinder solar-powered research aircraft is silhouetted against a clear blue sky as it soars aloft during a checkout flight from the Dryden Flight Research Center, Edwards, California, November, 1996. Pathfinder was a lightweight, solar-powered, remotely piloted flying wing aircraft used to demonstrate the use of solar power for long-duration, high-altitude flight. Its name denotes its mission as the 'Pathfinder' or first in a series of solar-powered aircraft that will be able to remain airborne for weeks or months on scientific sampling and imaging missions. Solar arrays covered most of the upper wing surface of the Pathfinder aircraft. These arrays provided up to 8,000 watts of power at high noon on a clear summer day. That power fed the aircraft's six electric motors as well as its avionics, communications, and other electrical systems. Pathfinder also had a backup battery system that could provide power for two to five hours, allowing for limited-duration flight after dark. Pathfinder flew at airspeeds of only 15 to 20 mph. Pitch control was maintained by using tiny elevators on the trailing edge of the wing while turns and yaw control were accomplished by slowing down or speeding up the motors on the outboard sections of the wing. On September 11, 1995, Pathfinder set a new altitude record for solar-powered aircraft of 50,567 feet above Edwards Air Force Base, California, on a 12-hour flight. On July 7, 1997, it set another, unofficial record of 71,500 feet at the Pacific Missile Range Facility, Kauai, Hawaii. In 1998, Pathfinder was modified into the longer-winged Pathfinder Plus configuration. (See the Pathfinder Plus photos and project description.)

  11. Pathfinder aircraft flight

    NASA Technical Reports Server (NTRS)

    1996-01-01

    The Pathfinder research aircraft's wing structure is clearly defined as it soars under a clear blue sky during a test flight from Dryden Flight Research Center, Edwards, California, in November of 1996. Pathfinder was a lightweight, solar-powered, remotely piloted flying wing aircraft used to demonstrate the use of solar power for long-duration, high-altitude flight. Its name denotes its mission as the 'Pathfinder' or first in a series of solar-powered aircraft that will be able to remain airborne for weeks or months on scientific sampling and imaging missions. Solar arrays covered most of the upper wing surface of the Pathfinder aircraft. These arrays provided up to 8,000 watts of power at high noon on a clear summer day. That power fed the aircraft's six electric motors as well as its avionics, communications, and other electrical systems. Pathfinder also had a backup battery system that could provide power for two to five hours, allowing for limited-duration flight after dark. Pathfinder flew at airspeeds of only 15 to 20 mph. Pitch control was maintained by using tiny elevators on the trailing edge of the wing while turns and yaw control were accomplished by slowing down or speeding up the motors on the outboard sections of the wing. On September 11, 1995, Pathfinder set a new altitude record for solar-powered aircraft of 50,567 feet above Edwards Air Force Base, California, on a 12-hour flight. On July 7, 1997, it set another, unofficial record of 71,500 feet at the Pacific Missile Range Facility, Kauai, Hawaii. In 1998, Pathfinder was modified into the longer-winged Pathfinder Plus configuration. (See the Pathfinder Plus photos and project description.)

  12. Aircraft engines. II

    SciTech Connect

    Smith, M.G. Jr.

    1988-01-01

    An account is given of the design features and prospective performance gains of ultrahigh bypass subsonic propulsion configurations and various candidate supersonic commercial aircraft powerplants. The supersonic types, whose enhanced thermodynamic cycle efficiency is considered critical to the economic viability of a second-generation SST, are the variable-cycle engine, the variable stream control engine, the turbine-bypass engine, and the supersonic-throughflow fan. Also noted is the turboramjet concept, which will be applicable to hypersonic aircraft whose airframe structure materials can withstand the severe aerothermodynamic conditions of this flight regime.

  13. Aircraft surface coatings

    NASA Technical Reports Server (NTRS)

    1982-01-01

    Liquid, spray on elastomeric polyurethanes are selected and investigated as best candidates for aircraft external protective coatings. Flight tests are conducted to measure drag effects of these coatings compared to paints and a bare metal surface. The durability of two elastometric polyurethanes are assessed in airline flight service evaluations. Laboratory tests are performed to determine corrosion protection properties, compatibility with aircraft thermal anti-icing systems, the effect of coating thickness on erosion durability, and the erosion characteristics of composite leading edges-bare and coated. A cost and benefits assessment is made to determine the economic value of various coating configurations to the airlines.

  14. Alternative aircraft fuels

    NASA Technical Reports Server (NTRS)

    Longwell, J. P.; Grobman, J. S.

    1977-01-01

    The efficient utilization of fossil fuels by future jet aircraft may necessitate the broadening of current aviation turbine fuel specifications. The most significant changes in specifications would be an increased aromatics content and a higher final boiling point in order to minimize refinery energy consumption and costs. These changes would increase the freezing point and might lower the thermal stability of the fuel, and could cause increased pollutant emissions, increased combustor liner temperatures, and poorer ignition characteristics. The effects that broadened specification fuels may have on present-day jet aircraft and engine components and the technology required to use fuels with broadened specifications are discussed.

  15. Solar powered aircraft

    SciTech Connect

    Phillips, W.H.

    1983-11-15

    A cruciform wing structure for a solar powered aircraft is disclosed. Solar cells are mounted on horizontal wing surfaces. Wing surfaces with spanwise axis perpendicular to surfaces maintain these surfaces normal to the sun's rays by allowing aircraft to be flown in a controlled pattern at a large bank angle. The solar airplane may be of conventional design with respect to fuselage, propeller and tail, or may be constructed around a core and driven by propeller mechanisms attached near the tips of the airfoils.

  16. Solar powered aircraft

    NASA Technical Reports Server (NTRS)

    Phillips, W. H. (Inventor)

    1983-01-01

    A cruciform wing structure for a solar powered aircraft is disclosed. Solar cells are mounted on horizontal wing surfaces. Wing surfaces with spanwise axis perpendicular to surfaces maintain these surfaces normal to the Sun's rays by allowing aircraft to be flown in a controlled pattern at a large bank angle. The solar airplane may be of conventional design with respect to fuselage, propeller and tail, or may be constructed around a core and driven by propeller mechanisms attached near the tips of the airfoils.

  17. Aircraft Laminar Flow Control

    NASA Technical Reports Server (NTRS)

    Joslin, Ronald D.

    1998-01-01

    Aircraft laminar flow control (LFC) from the 1930's through the 1990's is reviewed and the current status of the technology is assessed. Examples are provided to demonstrate the benefits of LFC for subsonic and supersonic aircraft. Early studies related to the laminar boundary-layer flow physics, manufacturing tolerances for laminar flow, and insect-contamination avoidance are discussed. LFC concept studies in wind-tunnel and flight experiments are the major focus of the paper. LFC design tools are briefly outlined for completeness.

  18. Advanced tool kits for EPR security.

    PubMed

    Blobel, B

    2000-11-01

    Responding to the challenge for efficient and high quality health care, the shared care paradigm must be established in health. In that context, information systems such as electronic patient records (EPR) have to meet this paradigm supporting communication and interoperation between the health care establishments (HCE) and health professionals (HP) involved. Due to the sensitivity of personal medical information, this co-operation must be provided in a trustworthy way. To enable different views of HCE and HP ranging from management, doctors, nurses up to systems administrators and IT professionals, a set of models for analysis, design and implementation of secure distributed EPR has been developed and introduced. The approach is based on the popular UML methodology and the component paradigm for open, interoperable systems. Easy to use tool kits deal with both application security services and communication security services but also with the security infrastructure needed. Regarding the requirements for distributed multi-user EPRs, modelling and implementation of policy agreements, authorisation and access control are especially considered. Current developments for a security infrastructure in health care based on cryptographic algorithms as health professional cards (HPC), security services employing digital signatures, and health-related TTP services are discussed. CEN and ISO initiatives for health informatics standards in the context of secure and communicable EPR are especially mentioned. PMID:11154968

  19. Kit systems for granulated decontamination formulations

    DOEpatents

    Tucker, Mark D.

    2010-07-06

    A decontamination formulation and method of making that neutralizes the adverse health effects of both chemical and biological compounds, especially chemical warfare (CW) and biological warfare (BW) agents, and toxic industrial chemicals. The formulation provides solubilizing compounds that serve to effectively render the chemical and biological compounds, particularly CW and BW compounds, susceptible to attack, and at least one reactive compound that serves to attack (and detoxify or kill) the compound. The formulation includes at least one solubilizing agent, a reactive compound, a sorbent additive, and water. A highly adsorbent sorbent additive (e.g., amorphous silica, sorbitol, mannitol, etc.) is used to "dry out" one or more liquid ingredients into a dry, free-flowing powder that has an extended shelf life, and is more convenient to handle and mix in the field. The formulation can be pre-mixed and pre-packaged as a multi-part kit system, where one or more of the parts are packaged in a powdered, granulated form for ease of handling and mixing in the field.

  20. Math Description Engine Software Development Kit

    NASA Technical Reports Server (NTRS)

    Shelton, Robert O.; Smith, Stephanie L.; Dexter, Dan E.; Hodgson, Terry R.

    2010-01-01

    The Math Description Engine Software Development Kit (MDE SDK) can be used by software developers to make computer-rendered graphs more accessible to blind and visually-impaired users. The MDE SDK generates alternative graph descriptions in two forms: textual descriptions and non-verbal sound renderings, or sonification. It also enables display of an animated trace of a graph sonification on a visual graph component, with color and line-thickness options for users having low vision or color-related impairments. A set of accessible graphical user interface widgets is provided for operation by end users and for control of accessible graph displays. Version 1.0 of the MDE SDK generates text descriptions for 2D graphs commonly seen in math and science curriculum (and practice). The mathematically rich text descriptions can also serve as a virtual math and science assistant for blind and sighted users, making graphs more accessible for everyone. The MDE SDK has a simple application programming interface (API) that makes it easy for programmers and Web-site developers to make graphs accessible with just a few lines of code. The source code is written in Java for cross-platform compatibility and to take advantage of Java s built-in support for building accessible software application interfaces. Compiled-library and NASA Open Source versions are available with API documentation and Programmer s Guide at http:/ / prim e.jsc.n asa. gov.

  1. Chemical and physical properties of high-yield alkaline sulfite green liquor

    SciTech Connect

    Sell, N.J.; Norman, J.C. . Natural and Applied Sciences)

    1993-11-01

    The majority of sodium sulfite pulping liquor recovery systems are based on the reductive burning of the spent liquor, followed by acidification of the resulting smelt solution by CO[sub 2]. This study investigated a number of the physical and chemical properties of the resulting green liquor which might be relevant to the optimum design of this type of sulfite and carbonate recovery system for an alkaline sulfite high-yield process. CO[sub 2] gas does generate H[sub 2]S when bubbled through green liquor; however, a large amount of solid soon is formed. Continuing the flow leads to increased amounts of H[sub 2]S, but the ratio of H[sub 2]S to CO[sub 2] remains less than 1.0. Solutions more highly concentrated in Na[sub 2]S absorb relatively more CO[sub 2], regardless of the ratios of H[sub 2]S to CO[sub 2] in the initial gas stream. The percentage of H[sub 2]S released increases with increasing Na[sub 2]S concentration. Stripping the green liquor with inert gas, steam, or vacuum does not improve the H[sub 2]S removal efficiency. The maximum CO[sub 2] pressure can be generated by decomposing pure 6 M NaHCO[sub 3]. If the starting material is a bicarbonate/carbonate mixture, conversion is incomplete and a portion of the NaHCO[sub 3] forms a dead load.

  2. Investigation of Pressurized Entrained-Flow Kraft Black Liquor Gasification in an Industrially Relevant Environment

    SciTech Connect

    Kevin Whitty

    2008-06-30

    The University of Utah's project 'Investigation of Pressurized Entrained-Flow Kraft Black Liquor Gasification in an Industrially Relevant Environment' (U.S. DOE Cooperative Agreement DE-FC26-04NT42261) was a response to U.S. DOE/NETL solicitation DE-PS36-04GO94002, 'Biomass Research and Development Initiative' Topical Area 4-Kraft Black Liquor Gasification. The project began September 30, 2004. The objective of the project was to improve the understanding of black liquor conversion in high pressure, high temperature reactors that gasify liquor through partial oxidation with either air or oxygen. The physical and chemical characteristics of both the gas and condensed phase were to be studied over the entire range of liquor conversion, and the rates and mechanisms of processes responsible for converting the liquor to its final smelt and syngas products were to be investigated. This would be accomplished by combining fundamental, lab-scale experiments with measurements taken using a new semi-pilot scale pressurized entrained-flow gasifier. As a result of insufficient availability of funds and changes in priority within the Office of Biomass Programs of the U.S. Department of Energy, the research program was terminated in its second year. In total, only half of the budgeted funding was made available for the program, and most of this was used during the first year for construction of the experimental systems to be used in the program. This had a severe impact on the program. As a consequence, most of the planned research was unable to be performed. Only studies that relied on computational modeling or existing experimental facilities started early enough to deliver useful results by the time to program was terminated Over the course of the program, small scale (approx. 1 ton/day) entrained-flow gasifier was designed and installed at the University of Utah's off-campus Industrial Combustion and Gasification Research Facility. The system is designed to operate at

  3. 49 CFR 173.161 - Chemical kits and first aid kits.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...: (1) Except for liquids of Division 5.2 (organic peroxide), inner packagings containing not more than 250 mL. Except for transportation by aircraft, for Division 5.2 (organic peroxide) liquids of Type B and C, inner packagings containing not more than 25 mL and for Division 5.2 (organic peroxide)...

  4. Optical communications for transport aircraft

    NASA Technical Reports Server (NTRS)

    Stengel, Robert

    1994-01-01

    Optical communications for transport aircraft are discussed. The problem involves: increasing demand for radio-frequency bands from an enlarging pool of users (aircraft, ground and sea vehicles, fleet operators, traffic control centers, and commercial radio and television); desirability of providing high-bandwidth dedicated communications to and from every aircraft in the National Airspace System; need to support communications, navigation, and surveillance for a growing number of aircraft; and improved meteorological observations by use of probe aircraft. The solution involves: optical signal transmission support very high data rates; optical transmission of signals between aircraft, orbiting satellites, and ground stations, where unobstructed line-of-sight is available; conventional radio transmissions of signals between aircraft and ground stations, where optical line-of-sight is unavailable; and radio priority given to aircraft in weather.

  5. Light aircraft sound transmission study

    NASA Technical Reports Server (NTRS)

    Atwal, M.; David, J.; Heitman, K.; Crocker, M. J.

    1983-01-01

    The revived interest in the design of propeller driven aircraft is based on increasing fuel prices as well as on the need for bigger short haul and commuter aircraft. A major problem encountered with propeller driven aircraft is propeller and exhaust noise that is transmitted through the fuselage sidewall structure. Part of the work which was conducted during the period April 1 to August 31, 1983, on the studies of sound transmission through light aircraft walls is presented.

  6. Aircraft community noise impact studies

    NASA Technical Reports Server (NTRS)

    1977-01-01

    The objectives of the study are to: (1) conduct a program to determine the community noise impact of advanced technology engines when installed in a supersonic aircraft, (2) determine the potential reduction of community noise by flight operational techniques for the study aircraft, (3) estimate the community noise impact of the study aircraft powered by suppressed turbojet engines and by advanced duct heating turbofan engines, and (4) compare the impact of the two supersonic designs with that of conventional commercial DC-8 aircraft.

  7. Bibliography for aircraft parameter estimation

    NASA Technical Reports Server (NTRS)

    Iliff, Kenneth W.; Maine, Richard E.

    1986-01-01

    An extensive bibliography in the field of aircraft parameter estimation has been compiled. This list contains definitive works related to most aircraft parameter estimation approaches. Theoretical studies as well as practical applications are included. Many of these publications are pertinent to subjects peripherally related to parameter estimation, such as aircraft maneuver design or instrumentation considerations.

  8. DETAIL VIEW OF ELECTRONICS TEST AREA, FLIGHT KITS FACILITY, ROOM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL VIEW OF ELECTRONICS TEST AREA, FLIGHT KITS FACILITY, ROOM NO. 1N12, FACING WEST - Cape Canaveral Air Force Station, Launch Complex 39, Vehicle Assembly Building, VAB Road, East of Kennedy Parkway North, Cape Canaveral, Brevard County, FL

  9. VIEW OF FLIGHT CREW SYSTEMS, FLIGHT KITS FACILITY, ROOM NO. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF FLIGHT CREW SYSTEMS, FLIGHT KITS FACILITY, ROOM NO. 1N12, FACING NORTH - Cape Canaveral Air Force Station, Launch Complex 39, Vehicle Assembly Building, VAB Road, East of Kennedy Parkway North, Cape Canaveral, Brevard County, FL

  10. VIEW OF FLIGHT CREW SYSTEMS, FLIGHT KITS FACILITY, ROOM NO. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF FLIGHT CREW SYSTEMS, FLIGHT KITS FACILITY, ROOM NO. 1N12, FACING SOUTH - Cape Canaveral Air Force Station, Launch Complex 39, Vehicle Assembly Building, VAB Road, East of Kennedy Parkway North, Cape Canaveral, Brevard County, FL

  11. Kennedy Space Center Medical Operations and Medical Kit

    NASA Technical Reports Server (NTRS)

    Scarpa, Philip

    2011-01-01

    This slide presentation reviews the emergency medical operations at Kennedy Space center, the KSC launch and landing contingency modes, the triage site, the medical kit, and the medications available.

  12. ENVIROGARD™ PCB TEST KIT, MILLIPORE, INC. - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    EPA Science Inventory

    The Envirogard™ polychlorinated biphenyl (PCB) immunoassay test kit rapidly analyzes for PCB concentrations in soils. Soils samples are extracted using methanol; extracts and calibration solutions are added to test tubes coated with antibodies that bind PCB molecules. The soil ex...

  13. Experiment kits for processing biological samples inflight on SLS-2

    NASA Technical Reports Server (NTRS)

    Savage, P. D.; Hinds, W. E.; Jaquez, R.; Evans, J.; Dubrovin, L.

    1995-01-01

    This paper describes development of an innovative, modular approach to packaging the instruments used to obtain and preserve the inflight rodent tissue and blood samples associated with hematology experiments on the Spacelab Life Sciences-2 (SLS-2) mission. The design approach organized the multitude of instruments into twelve 5- x 6- x l-in. kits which were each used for a particular experiment. Each kit contained the syringes, vials, microscope slides, etc., necessary for processing and storing blood and tissue samples for one rat on a particular day. A total of 1245 components, packaged into 128 kits and stowed in 17 Zero(registered trademark) boxes, were required. Crewmembers found the design easy to use and laid out in a logical, simple configuration which minimized chances for error during the complex procedures in flight. This paper also summarizes inflight performance of the kits on SLS-2.

  14. 21 CFR 872.3600 - Partially fabricated denture kit.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ...) Identification. A partially fabricated denture kit is a device composed of connected preformed teeth that is... with the oral tissues. After the denture base is constructed, the connected preformed teeth...

  15. 21 CFR 872.3600 - Partially fabricated denture kit.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ...) Identification. A partially fabricated denture kit is a device composed of connected preformed teeth that is... with the oral tissues. After the denture base is constructed, the connected preformed teeth...

  16. 21 CFR 872.3600 - Partially fabricated denture kit.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ...) Identification. A partially fabricated denture kit is a device composed of connected preformed teeth that is... with the oral tissues. After the denture base is constructed, the connected preformed teeth...

  17. Commercial aircraft wake vortices

    NASA Astrophysics Data System (ADS)

    Gerz, Thomas; Holzäpfel, Frank; Darracq, Denis

    2002-04-01

    This paper discusses the problem of wake vortices shed by commercial aircraft. It presents a consolidated European view on the current status of knowledge of the nature and characteristics of aircraft wakes and of technical and operational procedures of minimizing and predicting the vortex strength and avoiding wake encounters. Methodological aspects of data evaluation and interpretation, like the description of wake ages, the characterization of wake vortices, and the proper evaluation of wake data from measurement and simulation, are addressed in the first part. In the second part an inventory of our knowledge is given on vortex characterization and control, prediction and monitoring of vortex decay, vortex detection and warning, vortex encounter models, and wake-vortex safety assessment. Each section is concluded by a list of questions and required actions which may help to guide further research activities. The primary objective of the joint international efforts in wake-vortex research is to avoid potentially hazardous wake encounters for aircraft. Shortened aircraft separations under appropriate meteorological conditions, whilst keeping or even increasing the safety level, is the ultimate goal. Reduced time delays on the tactical side and increased airport capacities on the strategic side will be the benefits of these ambitious ventures for the air transportation industry and services.

  18. Robots for Aircraft Maintenance

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Marshall Space Flight Center charged USBI (now Pratt & Whitney) with the task of developing an advanced stripping system based on hydroblasting to strip paint and thermal protection material from Space Shuttle solid rocket boosters. A robot, mounted on a transportable platform, controls the waterjet angle, water pressure and flow rate. This technology, now known as ARMS, has found commercial applications in the removal of coatings from jet engine components. The system is significantly faster than manual procedures and uses only minimal labor. Because the amount of "substrate" lost is minimal, the life of the component is extended. The need for toxic chemicals is reduced, as is waste disposal and human protection equipment. Users of the ARMS work cell include Delta Air Lines and the Air Force, which later contracted with USBI for development of a Large Aircraft Paint Stripping system (LARPS). LARPS' advantages are similar to ARMS, and it has enormous potential in military and civil aircraft maintenance. The technology may also be adapted to aircraft painting, aircraft inspection techniques and paint stripping of large objects like ships and railcars.

  19. Aircraft to Medicine

    NASA Technical Reports Server (NTRS)

    1991-01-01

    This video discusses how the technology of computer modeling can improve the design and durability of artificial joints for human joint replacement surgery. Also, ultrasound, originally used to detect structural flaws in aircraft, can also be used to quickly assess the severity of a burn patient's injuries, thus aiding the healing process.

  20. Aircraft mission analysis

    NASA Technical Reports Server (NTRS)

    Hauge, D. S.; Rosendaal, H. L.

    1979-01-01

    Aircraft missions, from low to hypersonic speeds, are analyzed rapidly using the FORTRAN IV program NSEG. Program employs approximate equations of motion that vary in form with type of flight segment. Takeoffs, accelerations, climbs, cruises, descents, decelerations, and landings are considered.