Sample records for aircraft maintenance outsourcing

  1. Examining the Relationship Between Passenger Airline Aircraft Maintenance Outsourcing and Aircraft Safety

    NASA Astrophysics Data System (ADS)

    Monaghan, Kari L.

    The problem addressed was the concern for aircraft safety rates as they relate to the rate of maintenance outsourcing. Data gathered from 14 passenger airlines: AirTran, Alaska, America West, American, Continental, Delta, Frontier, Hawaiian, JetBlue, Midwest, Northwest, Southwest, United, and USAir covered the years 1996 through 2008. A quantitative correlational design, utilizing Pearson's correlation coefficient, and the coefficient of determination were used in the present study to measure the correlation between variables. Elements of passenger airline aircraft maintenance outsourcing and aircraft accidents, incidents, and pilot deviations within domestic passenger airline operations were analyzed, examined, and evaluated. Rates of maintenance outsourcing were analyzed to determine the association with accident, incident, and pilot deviation rates. Maintenance outsourcing rates used in the evaluation were the yearly dollar expenditure of passenger airlines for aircraft maintenance outsourcing as they relate to the total airline aircraft maintenance expenditures. Aircraft accident, incident, and pilot deviation rates used in the evaluation were the yearly number of accidents, incidents, and pilot deviations per miles flown. The Pearson r-values were calculated to measure the linear relationship strength between the variables. There were no statistically significant correlation findings for accidents, r(174)=0.065, p=0.393, and incidents, r(174)=0.020, p=0.793. However, there was a statistically significant correlation for pilot deviation rates, r(174)=0.204, p=0.007 thus indicating a statistically significant correlation between maintenance outsourcing rates and pilot deviation rates. The calculated R square value of 0.042 represents the variance that can be accounted for in aircraft pilot deviation rates by examining the variance in aircraft maintenance outsourcing rates; accordingly, 95.8% of the variance is unexplained. Suggestions for future research include

  2. 77 FR 67584 - Air Carrier Contract Maintenance Requirements

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-13

    ...-certificated repair facilities, and the air carriers' outsourcing of maintenance. In each of those reports... maintenance outsourcing practices (Recommendation 2). \\3\\ Review of Air Carriers' Use of Aircraft Repair... (Recommendation 7). \\4\\ Air Carrier's Outsourcing Use of Non-Certificated Repair Facilities, Report No. AV-2006...

  3. Two fuzzy possibilistic bi-objective zero-one programming models for outsourcing the equipment maintenance problem

    NASA Astrophysics Data System (ADS)

    Vahdani, Behnam; Jolai, Fariborz; Tavakkoli-Moghaddam, Reza; Meysam Mousavi, S.

    2012-07-01

    Maintenance outsourcing can be regarded as a strategic weapon to increase productivity and customer satisfaction in many companies, and this critical activity can be performed in a more efficient and effective way. This article presents two novel fuzzy possibilistic bi-objective zero-one programming (FPBOZOP) models for outsourcing of the equipment maintenance. In these models, cost parameters, including outsourcing cost, risk cost, time operations for performing the equipment maintenance and reliability level, as well as other influential parameters are considered through the outsourcing process. Moreover, the presented models can measure the capability of the company in doing different activities, unlike previous studies, in order to see the possibility of maintenance in-house, and can lead to make a best decision on the basis of the models' results. Both models are developed under uncertainty, which bring top managers the possibility of assigning more than one equipment or project to the supplier so that the profit is maximized, and the cost is minimized by considering bi-objectives concurrently. Then, a new fuzzy mathematical programming based possibilistic approach is introduced as a solution methodology from the recent literature to solve the proposed bi-objective zero-one programming (BOZOP) models and to reach a preferred compromise solution. Furthermore, a real-case study is utilized to demonstrate and to validate the effectiveness of the presented models. The computational results revealed that the models can be implemented in variety of problems in the domain of the equipment maintenance outsourcing and project outsourcing either from theory or application perspectives.

  4. Assessing the Relationship between Airlines' Maintenance Outsourcing and Aviation Professionals' Job Satisfaction

    NASA Astrophysics Data System (ADS)

    McCamey, Rotorua

    The current economic and security challenges placed an additional burden on U.S. airlines to provide optimum service at reasonable costs to the flying public. In efforts to stay competitive, U.S. airlines increased foreign-based outsourcing of aircraft major repair and overhaul (MRO) mainly to reduce labor costs and conserve capital. This concentrated focus on outsourcing and restructuring, ignored job dissatisfaction among remaining employees which could reduce and or eliminate an airline's competitiveness. The purpose of this quantitative study was (a) to assess the relationship between increased levels of foreign-based MRO outsourcing and aviation professionals' job satisfaction (Y1); (b) to assess the influence of increased levels of foreign-based outsourcing on MRO control (Y2), MRO error rate (Y3), and MRO technical punctuality (Y4) as perceived by aviation professionals; and (c) to assess the influence of increased levels of foreign-based MRO outsourcing on technical skills (Y5) and morale ( Y6) as perceived by aviation professionals. The survey instrument was utilized based on Paul Spector's Job Satisfaction Questionnaire and MRO specific questions. A random sample of 300 U.S. airline participants was requested via MarketTools to meet required sample size of 110 as determined through a priori power analysis. Study data rendered 198 useable surveys of 213 total responses, and correlation, multiple regression, and ANOVA methods were used to test study hypotheses. The Spearman's rho for (Y 1) was statistically significant, p = .010 and multiple regression was statistically significant, p < .001. A one-way ANOVA indicated participants differed in their opinions of (Y2) through (Y6), Recommendations for future research include contrasting domestic and global MRO providers, and examining global aircraft parts suppliers and aviation technical training.

  5. Outsourcing strategy and tendering methodology for the operation and maintenance of CERN’s cryogenic facilities

    NASA Astrophysics Data System (ADS)

    Serio, L.; Bremer, J.; Claudet, S.; Delikaris, D.; Ferlin, G.; Ferrand, F.; Pezzetti, M.; Pirotte, O.

    2017-12-01

    CERN operates and maintains the world largest cryogenic infrastructure ranging from ageing but well maintained installations feeding detectors, test facilities and general services, to the state-of-the-art cryogenic system serving the flagship LHC machine complex. A study was conducted and a methodology proposed to outsource to industry the operation and maintenance of the whole cryogenic infrastructure. The cryogenic installations coupled to non LHC-detectors, test facilities and general services infrastructure have been fully outsourced for operation and maintenance on the basis of performance obligations. The contractor is responsible for the operational performance of the installations based on a yearly operation schedule provided by CERN. The maintenance of the cryogenic system serving the LHC machine and its detectors has been outsourced on the basis of tasks oriented obligations, monitored by key performance indicators. CERN operation team, with the support of the contractor operation team, remains responsible for the operational strategy and performances. We report the analysis, strategy, definition of the requirements and technical specifications as well as the achieved technical and economic performances after one year of operation.

  6. A Grounded Theory Study of Aircraft Maintenance Technician Decision-Making

    NASA Astrophysics Data System (ADS)

    Norcross, Robert

    Aircraft maintenance technician decision-making and actions have resulted in aircraft system errors causing aircraft incidents and accidents. Aircraft accident investigators and researchers examined the factors that influence aircraft maintenance technician errors and categorized the types of errors in an attempt to prevent similar occurrences. New aircraft technology introduced to improve aviation safety and efficiency incur failures that have no information contained in the aircraft maintenance manuals. According to the Federal Aviation Administration, aircraft maintenance technicians must use only approved aircraft maintenance documents to repair, modify, and service aircraft. This qualitative research used a grounded theory approach to explore the decision-making processes and actions taken by aircraft maintenance technicians when confronted with an aircraft problem not contained in the aircraft maintenance manuals. The target population for the research was Federal Aviation Administration licensed aircraft and power plant mechanics from across the United States. Nonprobability purposeful sampling was used to obtain aircraft maintenance technicians with the experience sought in the study problem. The sample population recruitment yielded 19 participants for eight focus group sessions to obtain opinions, perceptions, and experiences related to the study problem. All data collected was entered into the Atlas ti qualitative analysis software. The emergence of Aircraft Maintenance Technician decision-making themes regarding Aircraft Maintenance Manual content, Aircraft Maintenance Technician experience, and legal implications of not following Aircraft Maintenance Manuals surfaced. Conclusions from this study suggest Aircraft Maintenance Technician decision-making were influenced by experience, gaps in the Aircraft Maintenance Manuals, reliance on others, realizing the impact of decisions concerning aircraft airworthiness, management pressures, and legal concerns

  7. Outsourcing versus in-house maintenance of medical devices: a longitudinal, empirical study.

    PubMed

    Miguel-Cruz, Antonio; Rios-Rincón, Adriana; Haugan, Gregory L

    2014-03-01

    To determine what factors have a significant influence on the performance of medical device maintenance outsourcing, and to determine how the performance of external governance structures differs depending on whether a hospital is private or public. This was a longitudinal study of 590 maintenance transactions at 20 hospitals in Bogotá, Colombia, involving 764 medical devices and 72 maintenance service providers. Maintenance performance data (i.e., turn-around time in hours; TAT) for the service providers (either in-house or outsourced) were primarily collected over a 20-month period, from December 2009-August 2011, by means of a monitoring procedure; then, a hazards model was run. The availability of specific repair parts, in-stock, in the city in which the medical devices were located, had a positive impact on the performance of both internal and external governance structures. Online service also had a positive impact on both, with a stronger positive impact on the performance of internal governance than on that of external governance. For transactions governed by external structures, better performance was seen in private hospitals than in public ones. In public health institutions, internal governance showed better performance than external governance. Both internal and external governance structures showed better performance in private healthcare institutions than in public ones. In public health institutions, internal governance shows better performance than external governance; this suggests that healthcare managers should reconsider the trend to eliminate in-house maintenance service staff in public healthcare institutions.

  8. 14 CFR 91.1109 - Aircraft maintenance: Inspection program.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 2 2012-01-01 2012-01-01 false Aircraft maintenance: Inspection program... Ownership Operations Program Management § 91.1109 Aircraft maintenance: Inspection program. Each program... conduct of inspections for the particular make and model aircraft, including necessary tests and checks...

  9. 14 CFR 91.1109 - Aircraft maintenance: Inspection program.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Aircraft maintenance: Inspection program... Ownership Operations Program Management § 91.1109 Aircraft maintenance: Inspection program. Each program... conduct of inspections for the particular make and model aircraft, including necessary tests and checks...

  10. 14 CFR 91.1109 - Aircraft maintenance: Inspection program.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 2 2014-01-01 2014-01-01 false Aircraft maintenance: Inspection program... Ownership Operations Program Management § 91.1109 Aircraft maintenance: Inspection program. Each program... conduct of inspections for the particular make and model aircraft, including necessary tests and checks...

  11. An evaluation of health information technology outsourcing success.

    PubMed

    Malovec, Shannon N; Borycki, Elizabeth M; Kushniruk, Andre W

    2015-01-01

    Outsourcing involves contracting out functions performed by an organization to another organization. Many healthcare organizations are exploring outsourcing as a way to address demands for health information technology (HIT). This study researches the success of outsourcing in the health informatics industry in Canada. The study is designed to help understand whether outsourcing four functions of HIT (i.e. development, implementation, operations, and maintenance) can prove successful for an organization. Findings demonstrate that outsourcing these four functions occurs in Canada; however, the research from the semi-structured interviews finds that operations and maintenance may be more commonly outsourced in Canada, over development and implementation functions. Despite this, findings from this research suggest that outsourcing development and implementation may offer more benefits and fewer challenges than outsourcing operations and maintenance. The research also finds that there can be benefits of outsourcing, such as gaining access to expertise and improving service levels. A weakness of outsourcing may be that internal knowledge is lost and having to manage the change required from outsourcing. The study proposes that there are many factors that need to be considered when outsourcing to ensure it is successful.

  12. Determinants of information technology outsourcing among health maintenance organizations.

    PubMed

    Wholey, D R; Padman, R; Hamer, R; Schwartz, S

    2001-09-01

    We analyze the determinants of HMO information technology outsourcing using two studies. Study 1 examines the effect of asset specificity on outsourcing for development and operation activities, using HMO specific fixed effects to control for differences between HMOs. Study 2 regresses the HMO specific fixed effects from Study 1, which measure an HMO's propensity to outsource, on HMO characteristics. The data comes from a 1995 InterStudy survey about information technology organization of HMOs. While HMOs split roughly equally in outsourcing information technology development activities, they are extremely unlikely to outsource the day-to-day operation of information systems. The greater an HMO's information technology capability and the complexity of information systems supported, the less likely is an HMO to outsource. While HMOs less than two years old, for-profit HMOs, local or Blue Cross-affiliated HMOs, and mixed HMOs are more likely to outsource, federally qualified HMOs are less likely to outsource. Policy and managerial implications for the adoption and diffusion of new ways of organizing information technology, such as application service providers (ASPs), are discussed.

  13. Licencing and Training Reform in the Australian Aircraft Maintenance Industry

    ERIC Educational Resources Information Center

    Hampson, Ian; Fraser, Doug

    2016-01-01

    The training and licencing of aircraft maintenance engineers fulfils a crucial protective function since it is they who perform and supervise aircraft maintenance and certify that planes are safe afterwards. In Australia, prior to training reform, a trades-based system of aircraft maintenance engineer training existed in an orderly relation with…

  14. Life cycle cost analysis of aging aircraft airframe maintenance

    NASA Astrophysics Data System (ADS)

    Sperry, Kenneth Robert

    Scope and method of study. The purpose of this study was to examine the relationship between an aircraft's age and its annual airframe maintenance costs. Common life cycle costing methodology has previously not recognized the existence of this cost growth potential, and has therefor not determined the magnitude nor significance of this cost element. This study analyzed twenty-five years of DOT Form 41-airframe maintenance cost data for the Boeing 727, 737, 747 and McDonnell Douglas DC9 and DC-10 aircraft. Statistical analysis included regression analysis, Pearson's r, and t-tests to test the null hypothesis. Findings and conclusion. Airframe maintenance cost growth was confirmed to be increasing after an aircraft's age exceeded its designed service objective of approximately twenty-years. Annual airframe maintenance cost growth increases were measured ranging from 3.5% annually for a DC-9, to approximately 9% annually for a DC-10 aircraft. Average measured coefficient of determination between age and airframe maintenance, exceeded .80, confirming a strong relationship between cost: and age. The statistical significance of the difference between airframe costs sampled in 1985, compared to airframe costs sampled in 1998 was confirmed by t-tests performed on each subject aircraft group. Future cost forecasts involving aging aircraft subjects must address cost growth due to aging when attempting to model an aircraft's economic service life.

  15. Impacts of Hospitals' Innovativeness on Information System Outsourcing Decisions

    PubMed Central

    2014-01-01

    Objectives The purpose of this study was to identify the effects of hospitals' innovativeness on outsourcing decision-making regarding four information system (IS) functions, namely, software programs, network maintenance, hardware systems, and PC/printer maintenance. Methods Using the 2011 roster of the Korean Hospital Association, this study selected 311 general hospitals as a study population. After identifying the managers who were in charge of outsourcing, this study administered questionnaires. A total of 103 hospitals responded. Results Of the responding hospitals, 55.34% outsourced at least one IS function, whereas 88.35% outsourced at least one managerial function. IS outsourcing was motivated by the need for outside experts, but other managerial functions were outsourced for cost savings. Innovative and early adopter hospitals were 4.52 and 4.91 times more likely to outsource IS functions related with work processes (i.e., software and network maintenance) than early and late majority hospitals, respectively. IT outsourcing effectiveness significantly influenced the outsourcing decisions regarding four IS functions. Hospitals that had perceived more risks of outsourcing significantly preferred non-outsourcing on their hardware systems, but the risks of outsourcing were not significant for outsourcing decisions regarding the other IS functions. Hospitals' innovativeness also significantly explained the quantity of innovation adoptions. Innovative and early adopter hospitals did more outsourcing than early and late majority hospitals. Conclusions Hospitals' innovativeness influences decision-making regarding outsourcing. Innovative hospitals are more likely to outsource their work-process-related IS functions. Thus, organizational traits, especially hospitals' innovativeness, should be considered as a key success factor for IS management. PMID:24872912

  16. Impacts of hospitals' innovativeness on information system outsourcing decisions.

    PubMed

    Park, Jae Sung

    2014-04-01

    The purpose of this study was to identify the effects of hospitals' innovativeness on outsourcing decision-making regarding four information system (IS) functions, namely, software programs, network maintenance, hardware systems, and PC/printer maintenance. Using the 2011 roster of the Korean Hospital Association, this study selected 311 general hospitals as a study population. After identifying the managers who were in charge of outsourcing, this study administered questionnaires. A total of 103 hospitals responded. Of the responding hospitals, 55.34% outsourced at least one IS function, whereas 88.35% outsourced at least one managerial function. IS outsourcing was motivated by the need for outside experts, but other managerial functions were outsourced for cost savings. Innovative and early adopter hospitals were 4.52 and 4.91 times more likely to outsource IS functions related with work processes (i.e., software and network maintenance) than early and late majority hospitals, respectively. IT outsourcing effectiveness significantly influenced the outsourcing decisions regarding four IS functions. Hospitals that had perceived more risks of outsourcing significantly preferred non-outsourcing on their hardware systems, but the risks of outsourcing were not significant for outsourcing decisions regarding the other IS functions. Hospitals' innovativeness also significantly explained the quantity of innovation adoptions. Innovative and early adopter hospitals did more outsourcing than early and late majority hospitals. Hospitals' innovativeness influences decision-making regarding outsourcing. Innovative hospitals are more likely to outsource their work-process-related IS functions. Thus, organizational traits, especially hospitals' innovativeness, should be considered as a key success factor for IS management.

  17. Aviation Maintenance Technology. General. G102 Fundamentals of Aircraft Maintenance. Instructor Material.

    ERIC Educational Resources Information Center

    Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    These instructor materials for an aviation maintenance technology course contain four instructional modules. The modules cover the following topics: identifying basic components of aircraft, performing aircraft cleaning and corrosion control, interpreting blueprints and drawing sketches, identifying structural materials, and performing basic…

  18. Robots for Aircraft Maintenance

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Marshall Space Flight Center charged USBI (now Pratt & Whitney) with the task of developing an advanced stripping system based on hydroblasting to strip paint and thermal protection material from Space Shuttle solid rocket boosters. A robot, mounted on a transportable platform, controls the waterjet angle, water pressure and flow rate. This technology, now known as ARMS, has found commercial applications in the removal of coatings from jet engine components. The system is significantly faster than manual procedures and uses only minimal labor. Because the amount of "substrate" lost is minimal, the life of the component is extended. The need for toxic chemicals is reduced, as is waste disposal and human protection equipment. Users of the ARMS work cell include Delta Air Lines and the Air Force, which later contracted with USBI for development of a Large Aircraft Paint Stripping system (LARPS). LARPS' advantages are similar to ARMS, and it has enormous potential in military and civil aircraft maintenance. The technology may also be adapted to aircraft painting, aircraft inspection techniques and paint stripping of large objects like ships and railcars.

  19. Aircraft Maintenance Engineering: Factors Impacting Airlines E-Maintenance Technologies, Authoring and Illustrations

    NASA Astrophysics Data System (ADS)

    Karayianes, Frank

    The purpose of this research was to evaluate factors influencing acceptance and use of technologies in the field of aircraft maintenance authoring, graphics, and documentation. Maintenance engineering authors convert complex engineering used in aircraft production and transform that data using technology (tools) into usable technical publications data. While the current literature includes a large volume of research in technology acceptance in various domains of industry and business, the problem is that no such studies exist with respect to the aircraft maintenance engineering authoring, allowing any number of tools to be used and acceptance to be unsure. The study was based on theoretical approaches of the Technology Acceptance Model and the associated hypothesis related to eight research questions. A survey questionnaire was developed for data collection from a selected population of aircraft maintenance engineering authors. Data collected from 148 responses were exposed to a range of statistical methods and analyses. Analysis of data were performed within the structural equation model using exploratory factor analysis, confirmatory factor analysis, and a range of regression methods. The analyses generally provided results consistent with prior literature. Two survey questions yielded unexpected results contrary to similar studies. The relationship between prior experience and job level did not show a significant relationship with perceived usefulness or perceived ease of use. Other results included the significant relationship between Perceived Usefulness and Perceived Ease of Use with Technology acceptance. Recommendations include understanding how Technology Acceptance can be improved for the industry and the need for further research not covered to refine recommendations for technology acceptance related to the aviation industry.

  20. Unsafe acts and unsafe outcomes in aircraft maintenance

    NASA Technical Reports Server (NTRS)

    Hobbs, Alan; Williamson, Ann

    2002-01-01

    Road safety studies using the Driver Behaviour Questionnaire (DBQ) have provided support for a three-way distinction between violations, skill-based errors and mistakes, and have indicated that a tendency to commit driving violations is associated with an increased risk of accident involvement. The aims of this study were to examine whether the three-way distinction of unsafe acts is applicable in the context of aircraft maintenance, and whether involvement in maintenance safety occurrences can be predicted on the basis of self-reported unsafe acts. A Maintenance Behaviour Questionnaire (MBQ) was developed to explore patterns of unsafe acts committed by aircraft maintenance mechanics. The MBQ was completed anonymously by over 1300 Australian aviation mechanics, who also provided information on their involvement in workplace accidents and incidents. Four factors were identified: routine violations, skill-based errors, mistakes and exceptional violations. Violations and mistakes were related significantly to the occurrence of incidents that jeopardized the quality of aircraft maintenance, but were not related to workplace injuries. Skill-based errors, while not related to work quality incidents, were related to workplace injuries. The results are consistent with the three-way typology of unsafe acts described by Reason et al. (1990) and with the DBQ research indicating an association between self-reported violations and accidents. The current findings suggest that interventions addressed at maintenance quality incidents should take into account the role of violations and mistakes, and the factors that promote them. In contrast, interventions directed at reducing workplace injury are likely to require a focus on skill-based errors.

  1. Infrared thermographic diagnostic aid to aircraft maintenance

    NASA Astrophysics Data System (ADS)

    Delo, Michael; Delo, Steve

    2007-04-01

    Thermographic data can be used as a supplement to aircraft maintenance operations in both back shop and flight line situations. Aircraft systems such as electrical, propulsion, environmental, pitot static and hydraulic/pneumatic fluid, can be inspected using a thermal infrared (IR) imager. Aircraft systems utilize electro-hydraulic, electro-mechanical, and electro-pneumatic mechanisms, which, if accessible, can be diagnosed for faults using infrared technology. Since thermographs are images of heat, rather than light, the measurement principle is based on the fact that any physical object (radiating energy at infrared wavelengths within the IR portion of the electro-magnetic spectrum), can be imaged with infrared imaging equipment. All aircraft systems being tested with infrared are required to be energized for troubleshooting, so that valuable baseline data from fully operational aircraft can be collected, archived and referenced for future comparisons.

  2. Maintenance cost study of rotary wing aircraft, phase 2

    NASA Technical Reports Server (NTRS)

    1979-01-01

    The Navy's maintenance and materials management data base was used in a study to determine the feasibility of predicting unscheduled maintenance costs for the dynamic systems of military rotary wing aircraft. The major operational and design variables were identified and the direct maintenance man hours per flight hour were obtained by step-wise multiple regression analysis. Five nonmilitary helicopter users were contacted to supply data on which variables were important factors in civil applications. These uses included offshore oil exploration and support, police and fire department rescue and enforcement, logging and heavy equipment movement, and U.S. Army military operations. The equations developed were highly effective in predicting unscheduled direct maintenance man hours per flying hours for military aircraft, but less effective for commercial or public service helicopters, probably because of the longer mission durations and the much higher utilization of civil users.

  3. An optimization method for condition based maintenance of aircraft fleet considering prognostics uncertainty.

    PubMed

    Feng, Qiang; Chen, Yiran; Sun, Bo; Li, Songjie

    2014-01-01

    An optimization method for condition based maintenance (CBM) of aircraft fleet considering prognostics uncertainty is proposed. The CBM and dispatch process of aircraft fleet is analyzed first, and the alternative strategy sets for single aircraft are given. Then, the optimization problem of fleet CBM with lower maintenance cost and dispatch risk is translated to the combinatorial optimization problem of single aircraft strategy. Remain useful life (RUL) distribution of the key line replaceable Module (LRM) has been transformed into the failure probability of the aircraft and the fleet health status matrix is established. And the calculation method of the costs and risks for mission based on health status matrix and maintenance matrix is given. Further, an optimization method for fleet dispatch and CBM under acceptable risk is proposed based on an improved genetic algorithm. Finally, a fleet of 10 aircrafts is studied to verify the proposed method. The results shows that it could realize optimization and control of the aircraft fleet oriented to mission success.

  4. An Optimization Method for Condition Based Maintenance of Aircraft Fleet Considering Prognostics Uncertainty

    PubMed Central

    Chen, Yiran; Sun, Bo; Li, Songjie

    2014-01-01

    An optimization method for condition based maintenance (CBM) of aircraft fleet considering prognostics uncertainty is proposed. The CBM and dispatch process of aircraft fleet is analyzed first, and the alternative strategy sets for single aircraft are given. Then, the optimization problem of fleet CBM with lower maintenance cost and dispatch risk is translated to the combinatorial optimization problem of single aircraft strategy. Remain useful life (RUL) distribution of the key line replaceable Module (LRM) has been transformed into the failure probability of the aircraft and the fleet health status matrix is established. And the calculation method of the costs and risks for mission based on health status matrix and maintenance matrix is given. Further, an optimization method for fleet dispatch and CBM under acceptable risk is proposed based on an improved genetic algorithm. Finally, a fleet of 10 aircrafts is studied to verify the proposed method. The results shows that it could realize optimization and control of the aircraft fleet oriented to mission success. PMID:24892046

  5. Aircraft Electronics Maintenance Training Simulator. Curriculum Outlines.

    ERIC Educational Resources Information Center

    Blackhawk Technical Coll., Janesville, WI.

    Instructional materials are provided for nine courses in an aircraft electronics maintenance training program. Courses are as follows: aviation basic electricity, direct current and alternating current electronics, basic avionic installations, analog electronics, digital electronics, microcomputer electronics, radio communications, aircraft…

  6. Determining the state-of-health of maintenance-free aircraft batteries

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Vutetakis, D.G.; Viswanathan, V.V.

    1995-07-01

    This paper presents an overview of methods to determine the state-of-health of maintenance-free aircraft batteries. The various failure modes of aircraft batteries are discussed, along with methods of detecting failed batteries. Specific examples of detection methods are presented for the F-16, F-18, AV-8B, B-1B, and B-52 aircraft batteries.

  7. Changes in the mean hearing threshold levels in military aircraft maintenance conscripts.

    PubMed

    Park, Won-Ju; Moon, Jai-Dong

    2016-11-01

    Aircraft maintenance crews are constantly exposed to severe aircraft noise. The purpose of this study was to verify whether noise from aircraft adversely affects the hearing threshold levels (HTLs) of aircraft maintenance conscripts during their 2 years of mandatory military service. This study included 3,000 male aircraft maintenance conscripts who work in the military runway area. We measured and analyzed HTLs at 2-4 kHz. The duration of exposure to noise increased with an increase in rank; however, HTLs showed a tendency to decrease. We attributed such contradicting results to the learning effect and adaptation to military service. However, we suspected that sudden deafness in 6 conscripts (0.2%) was due to loud noise in the runway area during military service. The effectiveness of the hearing conservation program for short-term military service personnel could be increased by focusing on preventing sudden deafness and preenlistment baseline audiogram tests.

  8. A Comparison of Aircraft Maintenance Organizational Structures

    DTIC Science & Technology

    1992-09-01

    Outputs ... ...................... 85 Appendix E : Double Cross-Validation ........... 117 Appendix F: Exchange of Independent Variables...splits into three major production branches (6). See Figure 8. 26 Aircraf t Interm ia•’ e Maintenance Off icerzI A ssistantAIKO I 1|A/ant a A Traiing...responsible for all aircraft maintenance activities, see Figure 9 (4:3). rdor ! E •; e Techn•1i Se~rvices Wff oE r I f .1 Bass Airaraf t Iaintenanoc E

  9. Lessons Learned from Outsourcing the Pearl Harbor MK-48 Intermediate Maintenance Activity

    DTIC Science & Technology

    2008-03-01

    transfer of ownership of assets. However, outsourcing is not simply a procurement decision. All organizations procure elements of their operations...systems, commercialization, and franchising (Office of Management and Budget, 2004). Strengths of Outsourcing Outsourcing is more efficient than...operating the IMA with organic resources vs . the cost of a comparable service provided by a contractor. Activity-based costing would also help managers

  10. 40 CFR 141.804 - Aircraft water system operations and maintenance plan.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 23 2014-07-01 2014-07-01 false Aircraft water system operations and maintenance plan. 141.804 Section 141.804 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Aircraft Drinking Water Rule § 141.804 Aircraft water system...

  11. Space shuttle recommendations based on aircraft maintenance experience

    NASA Technical Reports Server (NTRS)

    Spears, J. M.; Fox, C. L.

    1972-01-01

    Space shuttle design recommendations based on aircraft maintenance experience are developed. The recommendations are specifically applied to the landing gear system, nondestructive inspection techniques, hydraulic system design, materials and processes, and program support.

  12. Optimal manpower allocation in aircraft line maintenance (Case in GMF AeroAsia)

    NASA Astrophysics Data System (ADS)

    Puteri, V. E.; Yuniaristanto, Hisjam, M.

    2017-11-01

    This paper presents a mathematical modeling to find the optimal manpower allocation in an aircraft line maintenance. This research focuses on assigning the number and type of manpower that allocated to each service. This study considers the licenced worker or Aircraft Maintenance Engineer Licence (AMEL) and non licenced worker or Aircraft Maintenance Technician (AMT). In this paper, we also consider the relationship of each station in terms of the possibility to transfer the manpower among them. The optimization model considers the number of manpowers needed for each service and the requirement of AMEL worker. This paper aims to determine the optimal manpower allocation using the mathematical modeling. The objective function of the model is to find the minimum employee expenses. The model was solved using the ILOG CPLEX software. The results show that the manpower allocation can meet the manpower need and the all load can be served.

  13. A manpower scheduling heuristic for aircraft maintenance application

    NASA Astrophysics Data System (ADS)

    Sze, San-Nah; Sze, Jeeu-Fong; Chiew, Kang-Leng

    2012-09-01

    This research studies a manpower scheduling for aircraft maintenance, focusing on in-flight food loading operation. A group of loading teams with flexible shifts is required to deliver and upload packaged meals from the ground kitchen to aircrafts in multiple trips. All aircrafts must be served within predefined time windows. The scheduling process takes into account of various constraints such as meal break allocation, multi-trip traveling and food exposure time limit. Considering the aircrafts movement and predefined maximum working hours for each loading team, the main objective of this study is to form an efficient roster by assigning a minimum number of loading teams to the aircrafts. We proposed an insertion based heuristic to generate the solutions in a short period of time for large instances. This proposed algorithm is implemented in various stages for constructing trips due to the presence of numerous constraints. The robustness and efficiency of the algorithm is demonstrated in computational results. The results show that the insertion heuristic more efficiently outperforms the company's current practice.

  14. Identifying Human Factors Issues in Aircraft Maintenance Operations

    NASA Technical Reports Server (NTRS)

    Veinott, Elizabeth S.; Kanki, Barbara G.; Shafto, Michael G. (Technical Monitor)

    1995-01-01

    Maintenance operations incidents submitted to the Aviation Safety Reporting System (ASRS) between 1986-1992 were systematically analyzed in order to identify issues relevant to human factors and crew coordination. This exploratory analysis involved 95 ASRS reports which represented a wide range of maintenance incidents. The reports were coded and analyzed according to the type of error (e.g, wrong part, procedural error, non-procedural error), contributing factors (e.g., individual, within-team, cross-team, procedure, tools), result of the error (e.g., aircraft damage or not) as well as the operational impact (e.g., aircraft flown to destination, air return, delay at gate). The main findings indicate that procedural errors were most common (48.4%) and that individual and team actions contributed to the errors in more than 50% of the cases. As for operational results, most errors were either corrected after landing at the destination (51.6%) or required the flight crew to stop enroute (29.5%). Interactions among these variables are also discussed. This analysis is a first step toward developing a taxonomy of crew coordination problems in maintenance. By understanding what variables are important and how they are interrelated, we may develop intervention strategies that are better tailored to the human factor issues involved.

  15. Depression Prevalence and Exposure to Organophosphate Esters in Aircraft Maintenance Workers.

    PubMed

    Hardos, Jennifer E; Whitehead, Lawrence W; Han, Inkyu; Ott, Darrin K; Waller, D Kim

    2016-08-01

    Previous studies found that aircraft maintenance workers may be exposed to organophosphates in hydraulic fluid and engine oil. Studies have also illustrated a link between long-term low-level organophosphate pesticide exposure and depression. A questionnaire containing the Patient Health Questionnaire 8 depression screener was e-mailed to 52,080 aircraft maintenance workers (with N = 4801 complete responses) in a cross-sectional study to determine prevalence and severity of depression and descriptions of their occupational exposures. There was no significant difference between reported depression prevalence and severity in similar exposure groups in which aircraft maintenance workers were exposed or may have been exposed to organophosphate esters compared to similar exposure groups in which they were not exposed. However, a dichotomous measure of the prevalence of depression was significantly associated with self-reported exposure levels from low (OR: 1.21) to moderate (OR: 1.68) to high exposure (OR: 2.70) and with each exposure route including contact (OR: 1.68), inhalation (OR: 2.52), and ingestion (OR: 2.55). A self-reported four-level measure of depression severity was also associated with a self-reported four-level measure of exposure. Based on self-reported exposures and outcomes, an association is observed between organophosphate exposure and depression; however, we cannot assume that the associations we observed are causal because some workers may have been more likely to report exposure to organophosphate esters and also more likely to report depression. Future studies should consider using a larger sample size, better methods for characterizing crew chief exposures, and bioassays to measure dose rather than exposure. Hardos JE, Whitehead LW, Han I, Ott DK, Waller DK. Depression prevalence and exposure to organophosphate esters in aircraft maintenance workers. Aerosp Med Hum Perform. 2016; 87(8):712-717.

  16. Group 3 Unmanned Aircraft Systems Maintenance Challenges Within The Naval Aviation Enterprise

    DTIC Science & Technology

    2017-12-01

    cross winds . We again went through the mishap processes and reviewed training and maintenance records. A couple months later, there was a third crash...gas turbine engines powering aircraft with humans on board (DON, 2017). Group 3 unmanned aircraft utilize a sealed fuel system. The tank is filled...aircraft do not use gas turbine engines. They use either rotary Wankle or piston driven engines with much simpler fuel delivery systems such as carburetors

  17. A performance improvement case study in aircraft maintenance and its implications for hazard identification.

    PubMed

    Ward, Marie; McDonald, Nick; Morrison, Rabea; Gaynor, Des; Nugent, Tony

    2010-02-01

    Aircraft maintenance is a highly regulated, safety critical, complex and competitive industry. There is a need to develop innovative solutions to address process efficiency without compromising safety and quality. This paper presents the case that in order to improve a highly complex system such as aircraft maintenance, it is necessary to develop a comprehensive and ecologically valid model of the operational system, which represents not just what is meant to happen, but what normally happens. This model then provides the backdrop against which to change or improve the system. A performance report, the Blocker Report, specific to aircraft maintenance and related to the model was developed gathering data on anything that 'blocks' task or check performance. A Blocker Resolution Process was designed to resolve blockers and improve the current check system. Significant results were obtained for the company in the first trial and implications for safety management systems and hazard identification are discussed. Statement of Relevance: Aircraft maintenance is a safety critical, complex, competitive industry with a need to develop innovative solutions to address process and safety efficiency. This research addresses this through the development of a comprehensive and ecologically valid model of the system linked with a performance reporting and resolution system.

  18. Maintenance-free lead acid battery for inertial navigation systems aircraft

    NASA Astrophysics Data System (ADS)

    Johnson, William R.; Vutetakis, David G.

    1995-05-01

    Historically, Aircraft Inertial Navigation System (INS) Batteries have utilized vented nickel-cadmium batteries for emergency DC power. The United States Navy and Air Force developed separate systems during their respective INS developments. The Navy contracted with Litton Industries to produce the LTN-72 and Air Force contracted with Delco to produce the Carousel IV INS for the large cargo and specialty aircraft applications. Over the years, a total of eight different battery national stock numbers (NSNs) have entered the stock system along with 75 battery spare part NSNs. The Standard Hardware Acquisition and Reliability Program is working with the Aircraft Battery Group at Naval Surface Warfare Center Crane Division, Naval Air Systems Command (AIR 536), Wright Laboratory, Battelle Memorial Institute, and Concorde Battery Corporation to produce a standard INS battery. This paper discusses the approach taken to determine whether the battery should be replaced and to select the replacement chemistry. The paper also discusses the battery requirements, aircraft that the battery is compatible with, and status of Navy flight evaluation. Projected savings in avoided maintenance in Navy and Air Force INS Systems is projected to be $14.7 million per year with a manpower reduction of 153 maintenance personnel. The new INS battery is compatible with commercially sold INS systems which represents 66 percent of the systems sold.

  19. The potential risk of communication media in conveying critical information in the aircraft maintenance organisation: a case study

    NASA Astrophysics Data System (ADS)

    Shukri, S. Ahmad; Millar, R. M.; Gratton, G.; Garner, M.

    2016-10-01

    In the world of aircraft maintenance organisation, verbal and written communication plays a pivotal role in transferring critical information in relation to aircraft safety and efficiency. The communication media used to convey the critical information between departments at an aircraft maintenance organisation have potential risk in misunderstanding of the information. In this study, technical and non-technical personnel from five different departments at an aircraft maintenance organisation were interviewed on the communication media they normally utilised to communicate six different work procedures that are closely related to aircraft safety and efficiency. This is to discover which communication media pose higher risk in misunderstanding critical information. The findings reveal that written communication pose higher risk of misinterpretation compared with verbal communication when conveying critical information between departments.

  20. Blood lead level and types of aviation fuel in aircraft maintenance crew.

    PubMed

    Park, Won-Ju; Gu, Hye-Min; Lee, Suk-Ho

    2013-10-01

    This study inquired into any significant difference in blood lead levels (BLLs) among aircraft maintenance crews at the air-bases, each with a different aviation fuel in use, and confirmed an environmental impact of leaded aviation gasoline (AVGAS). This study included a total of 256 male aircraft maintenance personnel, among whom 105 used only AVGAS as their aviation fuel, while 151 used only jet propellant 8 (JP-8), a kerosene variety. BLLs were measured and the data on related factors were obtained. The arithmetic and geometric means of BLLs of the personnel at the airbases that used only AVGAS were 4.20 microg x dl(-1) and 4.01 microg x dl(-1) and that used only JP-8 were 3.79 microg x dl(-1) and 3.57 microg x dl(-1), respectively. The BLLs of the maintenance crew of the main workspace that was located within a 200-m distance from the runway were higher than those of the main workspace that was located 200 m or farther from the runway. The longer the work hours in the runway or the longer the work duration, the higher the BLLs of the maintenance crew. This investigation exposed the fact that a body's BLL could be increased by AVGAS emissions through the examination of aircraft maintenance crew. This result is in agreement with results of previous studies that suggest proximity to an airport may be associated with elevated BLLs for adults and children. Collectively, the results of the current study and previous research suggest that long-duration inhabitation and/or activities in close proximity to an air facility should be limited given that lead poses known health risks.

  1. Repair and maintenance of fiber optic data links on Navy aircraft

    NASA Astrophysics Data System (ADS)

    Fryland, Eric

    1992-02-01

    This paper will examine the problems and concerns of repairing fiber optic data links on carrier based Navy aircraft and will present the results of fiber optic splice testing that was performed aboard the USS Abraham Lincoln (CVN-72) in January 1991. Mechanical splicing of 50/125 micrometer fiber was performed at the various Navy maintenance levels in order to quantify the effects of the aircraft carrier environment on fiber optic splicing. Results, conclusions and recommendations will be given.

  2. Exposure to fall hazards and safety climate in the aircraft maintenance industry.

    PubMed

    Neitzel, Richard L; Seixas, Noah S; Harris, Michael J; Camp, Janice

    2008-01-01

    Falls represent a significant occupational hazard, particularly in industries with dynamic work environments. This paper describes rates of noncompliance with fall hazard prevention requirements, perceived safety climate and worker knowledge and beliefs, and the association between fall exposure and safety climate measures in commercial aircraft maintenance activities. Walkthrough observations were conducted on aircraft mechanics at two participating facilities (Sites A and B) to ascertain the degree of noncompliance. Mechanics at each site completed questionnaires concerning fall hazard knowledge, personal safety beliefs, and safety climate. Questionnaire results were summarized into safety climate and belief scores by workgroup and site. Noncompliance rates observed during walkthroughs were compared to the climate-belief scores, and were expected to be inversely associated. Important differences were seen in fall safety performance between the sites. The study provided a characterization of aircraft maintenance fall hazards, and also demonstrated the effectiveness of an objective hazard assessment methodology. Noncompliance varied by height, equipment used, location of work on the aircraft, shift, and by safety system. Although the expected relationship between safety climate and noncompliance was seen for site-average climate scores, workgroups with higher safety climate scores had greater observed noncompliance within Site A. Overall, use of engineered safety systems had a significant impact on working safely, while safety beliefs and climate also contributed, though inconsistently. The results of this study indicate that safety systems are very important in reducing noncompliance with fall protection requirements in aircraft maintenance facilities. Site-level fall safety compliance was found to be related to safety climate, although an unexpected relationship between compliance and safety climate was seen at the workgroup level within site. Finally, observed

  3. Psychosocial indicators among aircraft maintenance workers with and without neck and shoulder musculoskeletal symptoms.

    PubMed

    Oliveira, A; Nogueira, H; Diniz, A; Barbieri, D

    2012-01-01

    In the aircraft maintenance industry, most of workers performs manual handling tasks of different materials, varying from small objects up to large pieces of the aircraft. It can increase the occurrence of work-related musculoskeletal disorders (WMSDs), which are strongly associated with high physical demands required by the task. Moreover, psychosocial demands are considered as risk factors for musculoskeletal disorders in both the upper limbs and lumbar spine. Thus, the objective of this study was to assess psychosocial indicators among aircraft maintenance workers according to the presence of neck and shoulder musculoskeletal symptoms. Eighty workers of an aircraft maintenance company were evaluated (32.69 ± 8.25 years, 79.8 ± 13.4 kg, 175 ± 7 cm). According to physical examination, 50 workers were classified as asymptomatic (AS - 4.1 ± 3.17 positive signs) whilst 30 workers were classified as symptomatic (SS - 26.72 ± 11.44 positive signs). AS and SS have shown similar profile of demand (p = 0.62), control (p = 0.66) and social support (p = 0.74) according to the Job Content Questionnaire. However, the groups are different when considering work engagement variables. In general, SS have higher scores than AS (p < 0.05).

  4. Security and Cloud Outsourcing Framework for Economic Dispatch

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sarker, Mushfiqur R.; Wang, Jianhui; Li, Zuyi

    The computational complexity and problem sizes of power grid applications have increased significantly with the advent of renewable resources and smart grid technologies. The current paradigm of solving these issues consist of inhouse high performance computing infrastructures, which have drawbacks of high capital expenditures, maintenance, and limited scalability. Cloud computing is an ideal alternative due to its powerful computational capacity, rapid scalability, and high cost-effectiveness. A major challenge, however, remains in that the highly confidential grid data is susceptible for potential cyberattacks when outsourced to the cloud. In this work, a security and cloud outsourcing framework is developed for themore » Economic Dispatch (ED) linear programming application. As a result, the security framework transforms the ED linear program into a confidentiality-preserving linear program, that masks both the data and problem structure, thus enabling secure outsourcing to the cloud. Results show that for large grid test cases the performance gain and costs outperforms the in-house infrastructure.« less

  5. Security and Cloud Outsourcing Framework for Economic Dispatch

    DOE PAGES

    Sarker, Mushfiqur R.; Wang, Jianhui; Li, Zuyi; ...

    2017-04-24

    The computational complexity and problem sizes of power grid applications have increased significantly with the advent of renewable resources and smart grid technologies. The current paradigm of solving these issues consist of inhouse high performance computing infrastructures, which have drawbacks of high capital expenditures, maintenance, and limited scalability. Cloud computing is an ideal alternative due to its powerful computational capacity, rapid scalability, and high cost-effectiveness. A major challenge, however, remains in that the highly confidential grid data is susceptible for potential cyberattacks when outsourced to the cloud. In this work, a security and cloud outsourcing framework is developed for themore » Economic Dispatch (ED) linear programming application. As a result, the security framework transforms the ED linear program into a confidentiality-preserving linear program, that masks both the data and problem structure, thus enabling secure outsourcing to the cloud. Results show that for large grid test cases the performance gain and costs outperforms the in-house infrastructure.« less

  6. Partnering through Outsourcing.

    ERIC Educational Resources Information Center

    Palm, Richard L.

    2001-01-01

    Outsourcing has come to higher education and is being used to address cost concerns, quality of service, and other service management issues. Defines outsourcing terminology, provides reasons for outsourcing, and describes the outsourcing movement in the context of higher education. (Contains 45 references.) (GCP)

  7. A framework for the design of a voice-activated, intelligent, and hypermedia-based aircraft maintenance manual

    NASA Astrophysics Data System (ADS)

    Patankar, Manoj Shashikant

    Federal Aviation Regulations require Aviation Maintenance Technicians (AMTs) to refer to approved maintenance manuals when performing maintenance on airworthy aircraft. Because these manuals are paper-based, larger the size of the aircraft, more cumbersome are the manuals. Federal Aviation Administration (FAA) recognized the difficulties associated with the use of large manuals and conducted studies on the use of electronic media as an alternative to the traditional paper format. However, these techniques do not employ any artificial intelligence technologies and the user interface is limited to either a keyboard or a stylus pen. The primary emphasis of this research was to design a generic framework that would allow future development of voice-activated, intelligent, and hypermedia-based aircraft maintenance manuals. A prototype (VIHAMS-Voice-activated, Intelligent, and Hypermedia-based Aircraft Maintenance System) was developed, as a secondary emphasis, using the design and development techniques that evolved from this research. An evolutionary software design approach was used to design the proposed framework and the structured rapid prototyping technique was used to produce the VIHAMS prototype. VoiceAssist by Creative Labs was used to provide the voice interface so that the users (AMTs) could keep their hands free to work on the aircraft while maintaining complete control over the computer through discrete voice commands. KnowledgePro for Windows sp{TM}, an expert system shell, provided "intelligence" to the prototype. As a result of this intelligence, the system provided expert guidance to the user. The core information contained in conventional manuals was available in a hypermedia format. The prototype's operating hardware included a notebook computer with a fully functional audio system. An external microphone and the built-in speaker served as the input and output devices (along with the color monitor), respectively. Federal Aviation Administration

  8. To outsource or not to outsource: Examining the effects of outsourcing IT functions on financial performance in hospitals.

    PubMed

    Menachemi, Nir; Burkhardt, Jeffrey; Shewchuk, Richard; Burke, Darrell; Brooks, Robert G

    2007-01-01

    Outsourcing of information technology (IT) functions is a popular strategy with both potential benefits and risks for hospitals. Anecdotal evidence, based on case studies, suggests that outsourcing may be associated with significant cost savings. However, no generalizable evidence exists to support such assertions. This study examines whether outsourcing IT functions is related to improved financial performance in hospitals. Primary survey data on IT outsourcing behavior were combined with secondary data on hospital financial performance. Regression analyses examined the relationship between outsourcing and various measures of financial performance while controlling for bed size, average patient acuity, geographic location, and overall IT adoption. Complete data from a total of 83 Florida hospitals were available for analyses. Findings suggest that the decision to outsource IT functions is not related to any of the hospital financial performance measures that were examined. Specifically, outsourcing of IT functions did not correlate with net inpatient revenue, net patient revenue, hospital expenses, total expenses, cash flow ratio, operating margin, or total margin. In most cases, IT outsourcing is not necessarily a cost-lowering strategy, but instead, a cost-neutral manner in which to accomplish an organizational strategy.

  9. A Survey of the Aircraft Maintenance Industry to Solicit Perceptions Regarding the Effectiveness of Recent Graduates of F.A.A. Approved Maintenance Schools.

    ERIC Educational Resources Information Center

    O'Brian, Benjamin H.

    A study examined the perceptions of employers in the aircraft maintenance industry regarding the effectiveness of recent graduates of Federal Aeronautics Administration (FAA)-approved maintenance schools. Of the 100 employers who were contacted, 68 returned usable surveys. Based on responses, it was concluded that the views of employers in the…

  10. Vocational Training and European Standardisation of Qualifications: The Case of Aircraft Maintenance

    ERIC Educational Resources Information Center

    Haas, Joachim; Ourtau, Maurice

    2009-01-01

    Initiatives to standardise the conditions for practising certain regulated activities are being taken at European level, particularly in light of the free movement of people and the recognition of qualifications in Member states. This paper looks at the introduction of european licences for aircraft maintenance engineers. It follows an in-depth…

  11. Measuring the performance of maintenance service outsourcing.

    PubMed

    Cruz, Antonio Miguel; Rincon, Adriana Maria Rios; Haugan, Gregory L

    2013-01-01

    The aims of this paper are (1) to identify the characteristics of maintenance service providers that directly impact maintenance service quality, using 18 independent covariables; (2) to quantify the change in risk these covariables present to service quality, measured in terms of equipment turnaround time (TAT). A survey was applied to every maintenance service provider (n = 19) for characterization purposes. The equipment inventory was characterized, and the TAT variable recorded and monitored for every work order of each service provider (N = 1,025). Finally, the research team conducted a statistical analysis to accomplish the research objectives. The results of this study offer strong empirical evidence that the most influential variables affecting the quality of maintenance service performance are the following: type of maintenance, availability of spare parts in the country, user training, technological complexity of the equipment, distance between the company and the hospital, and the number of maintenance visits performed by the company. The strength of the results obtained by the Cox model built are supported by the measure of the Rp,e(2) = 0.57 with a value of Rp,e= 0.75. Thus, the model explained 57% of the variation in equipment TAT, with moderate high positive correlation between the dependent variable (TAT) and independent variables.

  12. Impacts of outsourcing in educational hospitals in Iran: A study on Isfahan University of Medical Sciences-2010.

    PubMed

    Karimi, Saeed; Agharahimi, Zahra; Yaghoubi, Maryam

    2012-01-01

    Outsourcing in healthcare is a cost-effective strategy that can lead to increase services quality. The aim of this study was to determine the types of services that have been outsourced in educational hospitals in Isfahan and to investigate managers' view about the impact of Outsourcing. A descriptive-survey study carried out in 2010. Our samples consisted of 100 educational hospital and treatment deputy senior managers of Isfahan University of Medical Sciences and 53 usable questionnaires were received. Survey instrument main points were the extent to which educational hospital outsource services and the impact of Outsourcing. Reliability and validity of the questionnaire have been verified. Data are analyzed with SPSS18 software. The results for medical-diagnostics services showed physiotherapy, radiology, and ultrasound that have the highest rate (33%) of being outsourced. Between logistic and administrative activities, housekeeping, and facility engineering maintenance services are the highest rate of outsourced (100%) and green space, CSR, laundry, and medical records are the lowest rate of outsourced (16%). In managers' view, in relation to advantages of outsourcing, pay more attention to internal and external customers in private sector (57.2%) was the highest. In relation to disadvantages of outsourcing, costs increase for the patients (45.6%) was the highest. In relation to barriers of outsourcing, forgetting the goal of outsourcing (efficiency) (60.6%) was the highest. Finally, managers' views about outsourcing in health services organizations were rather acceptable, but in their views, there are barriers in implementation of outsourcing and they are focused on removing the barriers before outsourcing. Fundamental infrastructure developments as making competing market, promoting of cultures, education, modifying the management attitude and approach, and establishing incentive policies are emphasized for successful implementation of outsourcing.

  13. Impacts of outsourcing in educational hospitals in Iran: A study on Isfahan University of Medical Sciences-2010

    PubMed Central

    Karimi, Saeed; Agharahimi, Zahra; Yaghoubi, Maryam

    2012-01-01

    Purpose: Outsourcing in healthcare is a cost-effective strategy that can lead to increase services quality. The aim of this study was to determine the types of services that have been outsourced in educational hospitals in Isfahan and to investigate managers’ view about the impact of Outsourcing. Design/Methodology/Approach: A descriptive-survey study carried out in 2010. Our samples consisted of 100 educational hospital and treatment deputy senior managers of Isfahan University of Medical Sciences and 53 usable questionnaires were received. Survey instrument main points were the extent to which educational hospital outsource services and the impact of Outsourcing. Reliability and validity of the questionnaire have been verified. Data are analyzed with SPSS18 software. Findings: The results for medical-diagnostics services showed physiotherapy, radiology, and ultrasound that have the highest rate (33%) of being outsourced. Between logistic and administrative activities, housekeeping, and facility engineering maintenance services are the highest rate of outsourced (100%) and green space, CSR, laundry, and medical records are the lowest rate of outsourced (16%). In managers’ view, in relation to advantages of outsourcing, pay more attention to internal and external customers in private sector (57.2%) was the highest. In relation to disadvantages of outsourcing, costs increase for the patients (45.6%) was the highest. In relation to barriers of outsourcing, forgetting the goal of outsourcing (efficiency) (60.6%) was the highest. Conclusion: Finally, managers’ views about outsourcing in health services organizations were rather acceptable, but in their views, there are barriers in implementation of outsourcing and they are focused on removing the barriers before outsourcing. Fundamental infrastructure developments as making competing market, promoting of cultures, education, modifying the management attitude and approach, and establishing incentive policies are

  14. Relative costs of anesthesiologist prepared, hospital pharmacy prepared and outsourced anesthesia drugs.

    PubMed

    Jelacic, Srdjan; Craddick, Karen; Nair, Bala G; Bounthavong, Mark; Yeung, Kai; Kusulos, Dolly; Knutson, Jennifer A; Somani, Shabir; Bowdle, Andrew

    2017-02-01

    Anesthesia drugs can be prepared by anesthesia providers, hospital pharmacies or outsourcing facilities. The decision whether to outsource all or some anesthesia drugs is challenging since the costs associated with different anesthesia drug preparation methods remain poorly described. The costs associated with preparation of 8 commonly used anesthesia drugs were analyzed using a budget impact analysis for 4 different syringe preparation strategies: (1) all drugs prepared by anesthesiologist, (2) drugs prepared by anesthesiologist and hospital pharmacy, (3) drugs prepared by anesthesiologist and outsourcing facility, and (4) all drugs prepared by outsourcing facility. A strategy combining anesthesiologist and hospital pharmacy prepared drugs was associated with the lowest estimated annual cost in the base-case budget impact analysis with an annual cost of $225 592, which was lower than other strategies by a margin of greater than $86 000. A combination of anesthesiologist and hospital pharmacy prepared drugs resulted in the lowest annual cost in the budget impact analysis. However, the cost of drugs prepared by an outsourcing facility maybe lower if the capital investment needed for the establishment and maintenance of the US Pharmacopeial Convention Chapter <797> compliant facility is included in the budget impact analysis. Copyright © 2016 Elsevier Inc. All rights reserved.

  15. [A study on facilitators and inhibitors to the introduction of outsourcing in the hospital information systems in Korea].

    PubMed

    Choy, Soon; Shin, Hyeong-Sik; Choi, Inyoung; Kim, Sukil

    2007-01-01

    This study was conducted to investigate the current status of outsourcing in Korean hospital information systems and the factors influencing its introduction. The authors surveyed 136 hospitals located in Seoul and its surrounding vicinities from June 7 to June 23, 2006. The facilitators and inhibitors to outsourcing in hospital information systems were derived from literature and expert reviews. Multiple logistic regression analysis was applied to identify the major influencing factors on outsourcing in hospital information systems. Eighty-six (63.2%) of the 136 hospitals surveyed, which were mainly tertiary hospitals, responded to using outsourcing for their hospital information systems. "Hardware and software maintenance and support," "application development," and "management of service and staff" were the major areas of outsourcing. Outsourcing had been employed for 4-7 years by 45.5% of the hospitals and the proportion of the budget used for outsourcing was less than 20%. A need for an extension in outsourcing was agreed on by 76.5% of the hospitals. The multiple logistic regression analysis showed that both consumer satisfaction and security risk have an influence on hospital information system outsourcing. Outsourcing in hospital information systems is expected to increase just as in other industries. One primary facilitator to outsourcing in other industries is consumer satisfaction. We found that this was also a facilitator to outsourcing in hospital information systems. Security risk, which is usually considered an inhibitor to information technology outsourcing, was proven to be an inhibitor here as well. The results of this study may help hospital information systems establish a strategy and management plan for outsourcing.

  16. Associations between errors and contributing factors in aircraft maintenance

    NASA Technical Reports Server (NTRS)

    Hobbs, Alan; Williamson, Ann

    2003-01-01

    In recent years cognitive error models have provided insights into the unsafe acts that lead to many accidents in safety-critical environments. Most models of accident causation are based on the notion that human errors occur in the context of contributing factors. However, there is a lack of published information on possible links between specific errors and contributing factors. A total of 619 safety occurrences involving aircraft maintenance were reported using a self-completed questionnaire. Of these occurrences, 96% were related to the actions of maintenance personnel. The types of errors that were involved, and the contributing factors associated with those actions, were determined. Each type of error was associated with a particular set of contributing factors and with specific occurrence outcomes. Among the associations were links between memory lapses and fatigue and between rule violations and time pressure. Potential applications of this research include assisting with the design of accident prevention strategies, the estimation of human error probabilities, and the monitoring of organizational safety performance.

  17. The study on the outsourcing of Taiwan's hospitals: a questionnaire survey research

    PubMed Central

    Hsiao, Chih-Tung; Pai, Jar-Yuan; Chiu, Hero

    2009-01-01

    Background The aim of this study was to assess the outsourcing situation in Taiwanese hospitals and compares the differences in hospital ownership and in accreditation levels. Methods This research combined two kinds of methods: a questionnaire survey and the in-depth interview to two CEOs of the sample hospitals. One hospital is not-for-profit, while the other is a public hospital and the research samples are from the hospital data from Taiwan's 2005 to 2007 Department of Health qualifying lists of hospital accreditation. The returned questionnaires were analyzed with STATISTICA® 7.1 version software. Results The results for non-medical items showed medical waste and common trash both have the highest rate (94.6 percent) of being outsourced. The gift store (75 percent) and linen (73 percent) follow close behind, while the lowest rate of outsourcing is in utility maintenance (13.5 percent). For medical items, the highest rate of outsourcing is in the ambulance units (51.4 percent), while the hemodialysis center follows close behind with a rate of 50 percent. For departments of nutrition, pharmacy, and nursing however, the outsourcing rate is lower than 3 percent. This shows that Taiwan's hospitals are still conservative in their willingness to outsource for medical items. The results of the satisfaction paired t-test show that the non-medical items have a higher score than the medical items. The factor analysis showed the three significant factors in of non medical items' outsourcing are "performance", "finance", and "human resource". For medical items, the two factors are "operation" and satisfaction". To further exam the factor validity and reliability of the satisfaction model, a confirmative factor analysis (CFA) was conducted using structure equation modeling (SEM) method and found the model fitting well. Conclusion Hospitals, especially for public hospitals, can get benefits from outsourcing to revive the full-time-equivalent and human resource limitation

  18. The study on the outsourcing of Taiwan's hospitals: a questionnaire survey research.

    PubMed

    Hsiao, Chih-Tung; Pai, Jar-Yuan; Chiu, Hero

    2009-05-13

    The aim of this study was to assess the outsourcing situation in Taiwanese hospitals and compares the differences in hospital ownership and in accreditation levels. This research combined two kinds of methods: a questionnaire survey and the in-depth interview to two CEOs of the sample hospitals. One hospital is not-for-profit, while the other is a public hospital and the research samples are from the hospital data from Taiwan's 2005 to 2007 Department of Health qualifying lists of hospital accreditation. The returned questionnaires were analyzed with STATISTICA 7.1 version software. The results for non-medical items showed medical waste and common trash both have the highest rate (94.6 percent) of being outsourced. The gift store (75 percent) and linen (73 percent) follow close behind, while the lowest rate of outsourcing is in utility maintenance (13.5 percent). For medical items, the highest rate of outsourcing is in the ambulance units (51.4 percent), while the hemodialysis center follows close behind with a rate of 50 percent. For departments of nutrition, pharmacy, and nursing however, the outsourcing rate is lower than 3 percent. This shows that Taiwan's hospitals are still conservative in their willingness to outsource for medical items. The results of the satisfaction paired t-test show that the non-medical items have a higher score than the medical items. The factor analysis showed the three significant factors in of non medical items' outsourcing are "performance", "finance", and "human resource". For medical items, the two factors are "operation" and satisfaction". To further exam the factor validity and reliability of the satisfaction model, a confirmative factor analysis (CFA) was conducted using structure equation modeling (SEM) method and found the model fitting well. Hospitals, especially for public hospitals, can get benefits from outsourcing to revive the full-time-equivalent and human resource limitation.

  19. Outsourcing. Health care organizations are considering strategic goals in making outsourcing decisions.

    PubMed

    Chin, T L

    1997-08-01

    More health care organizations are outsourcing the management of some or all of their information systems. Executives at many organizations that have tried outsourcing say it enables them to focus on core competencies, better allocate resources, get more information technology at less cost, share risks of implementing information technology with outsourcers and guarantee access to skilled labor. But the information technology outsourcing market remains relatively small in health care because many CIOs still are wary of turning over control of important functions to outsiders.

  20. 14 CFR 91.407 - Operation after maintenance, preventive maintenance, rebuilding, or alteration.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... flies the aircraft, makes an operational check of the maintenance performed or alteration made, and logs... maintenance, preventive maintenance, rebuilding, or alteration. (a) No person may operate any aircraft that... 14 Aeronautics and Space 2 2012-01-01 2012-01-01 false Operation after maintenance, preventive...

  1. 14 CFR 91.407 - Operation after maintenance, preventive maintenance, rebuilding, or alteration.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... flies the aircraft, makes an operational check of the maintenance performed or alteration made, and logs... maintenance, preventive maintenance, rebuilding, or alteration. (a) No person may operate any aircraft that... 14 Aeronautics and Space 2 2013-01-01 2013-01-01 false Operation after maintenance, preventive...

  2. 14 CFR 91.407 - Operation after maintenance, preventive maintenance, rebuilding, or alteration.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... flies the aircraft, makes an operational check of the maintenance performed or alteration made, and logs... maintenance, preventive maintenance, rebuilding, or alteration. (a) No person may operate any aircraft that... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Operation after maintenance, preventive...

  3. 14 CFR 91.407 - Operation after maintenance, preventive maintenance, rebuilding, or alteration.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... flies the aircraft, makes an operational check of the maintenance performed or alteration made, and logs... maintenance, preventive maintenance, rebuilding, or alteration. (a) No person may operate any aircraft that... 14 Aeronautics and Space 2 2011-01-01 2011-01-01 false Operation after maintenance, preventive...

  4. 14 CFR 91.407 - Operation after maintenance, preventive maintenance, rebuilding, or alteration.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... flies the aircraft, makes an operational check of the maintenance performed or alteration made, and logs... maintenance, preventive maintenance, rebuilding, or alteration. (a) No person may operate any aircraft that... 14 Aeronautics and Space 2 2014-01-01 2014-01-01 false Operation after maintenance, preventive...

  5. Outsourcing and its implications for hospital organizations in Turkey.

    PubMed

    Yigit, Vahit; Tengilimoglu, Dilaver; Kisa, Adnan; Younis, Mustafa Zeedan

    2007-01-01

    To thrive in this era of global competition, all organizations must explore new managerial approaches to get an edge in the marketplace. One increasingly appealing approach is outsourcing. Hospitals are particularly fertile environments for outsourcing, given their role as providers of a broad and complex array of services, many of which may be bought from other institutions. The purpose of this study is to determine the types of services that hospitals in Turkey buy from other organizations. The study sample included 14 university hospitals, 20 Ministry of Health Hospitals, 15 Social Insurance Organization Hospitals and 31 private hospitals in Istanbul, Ankara, Izmir, Antalya, and Eskisehir, which are the biggest cities in Turkey. The following services were found to be outsourced: hospital management information systems (83.8%), cleaning services (81.3%), maintenance services (72.5%), leased medical devices (75.0%), food services (60.0%), patient direction services (63.8%), magnetic imaging services (60.0%), other imaging services (48.8%), laboratory services (42.5%), security services (38.8%), laundry services (36.3%), patient transportation services (33.8%), accounting services (26.3%), ambulance services (22.5%), patient satisfaction measurement services (13.8%), consultancy services (12.5%), and financial and investment services (9.5%). Private hospitals bought more services than public facilities did. The sampled hospitals chose to outsource services in order to decrease costs (78.8%), increase the quality of services rendered (65.5%), increase flexibility and share risk (36.6%), and increase profits (11.2%). The results of this study suggest that outsourcing, when applied judiciously through cost and risk analysis, is a cost-effective approach that can be used by most hospitals.

  6. 78 FR 28625 - American Airlines, a Subsidiary of AMR Corporation, Tulsa International Airport, Fleet Services...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-15

    ... State of Oklahoma Employment Security Commission requested administrative reconsideration of the... workers, stated ``aircraft maintenance has been outsourced to China'' and that the fleet services clerks...

  7. [Characteristics of a negative effect of aviation noise on hearing organ of aircraft maintenance personnel].

    PubMed

    Zinkin, V N; Soldatov, S K; Sheshegov, P M

    2007-01-01

    Otolaryngological examination was carried out of 80 engineers and technicians engaged in maintenance of aircrafts in the airports. They are continuously exposed to occupational aviation noise and therefore are at risk for chronic neurosensory hypoacusis. Pure tone audiogram registers in them a rise in hearing thresholds throughout the whole band of frequencies studied. This means that aviation maintenance staff is exposed to noise containing highly intensive infrasound and high-frequency components. The detected pathology directly correlated with duration of exposure to noise. Development of neurosensory hypoacusis in aviation maintenance specialists starts earlier than in other specialists exposed to noise.

  8. How the U. of Pennsylvania Learned that Outsourcing Is No Panacea.

    ERIC Educational Resources Information Center

    Van Der Werf, Martin

    2000-01-01

    Reports on the experience of the University of Pennsylvania in outsourcing the operation and maintenance of its campus buildings. Finds differing opinions on why the contract with Trammell Crow Company has not been successful, such as the extreme state of disrepair of many of the buildings. Also notes the experiences of institutions in this…

  9. Preventive Maintenance Process

    NASA Technical Reports Server (NTRS)

    Ciaruffoli, Veronica; Bramley, Craig; Matteson, Mike

    2001-01-01

    The Preventive Maintenance (PM) program at Stennis Space Center (SSC) evolved from an ineffective and poorly organized state to a highly organized state in which it became capable of tracking equipment, planning jobs with man hour estimates, and supporting outsourcing. This viewgraph presentation traces the steps the program took to improve itself.

  10. Maintenance problems associated with the operation of the F402 /Pegasus/ engine in the AV-8A /Harrier/ aircraft

    NASA Technical Reports Server (NTRS)

    Stanley, C. W.; Hood, W. E.

    1981-01-01

    The U.S. Marine Corp (USMC) has been operating the only V/STOL attack aircraft in the western world since 1971. Some of the maintenance problems experienced are related to the unique V/STOL design criteria of the Pegasus engine. However, the major part of the required maintenance effort is found to involve the more conventional engine problems. A description of the aircraft engine is provided and the problems resulting from V/STOL design demands are examined. Attention is given to the fuel system control, the engine air bleed, foreign object damage to the hp compressor, and the engine exhaust system.

  11. Musculoskeletal disorders and psychosocial risk factors among workers of the aircraft maintenance industry.

    PubMed

    Nogueira, Helen Cristina; Diniz, Ana Carolina Parise; Barbieri, Dechristian França; Padula, Rosimeire Simprini; Carregaro, Rodrigo Luiz; de Oliveira, Ana Beatriz

    2012-01-01

    During the recent decades Brazil has experienced an exponential growth in the aviation sector resulting in an increasing workforce. The aircraft maintenance industry stands out, where the workers have to handle different kind of objects. The aim of this study was to evaluate psychosocial indicators as well as musculoskeletal symptoms and disorders among aircraft maintenance workers. One hundred and one employees were evaluated (32.69 ± 8.25 yr, 79.8 ± 13.4 kg, and 1.75 ± 0.07 m). Musculoskeletal symptoms and disorders were assessed through the Nordic Musculoskeletal Questionnaire (NMQ) and a standardized physical examination. The Job Content Questionnaire (JCQ) and the Utrecht Work Engagement Scale (UWES) were applied to evaluate psychosocial indicators. Results of the NMQ indicate the lower back as the most affected body region. On the other hand, the physical examination has shown clinical diagnosis of shoulder disorders. Neck, upper back and ankle/foot were also reported as painful sites. Most of workers have active work-demand profile and high work engagement levels. We suggest that musculoskeletal symptoms may be related to high biomechanical demand of the tasks performed by workers, what must be further investigated.

  12. Home care outsourcing strategy.

    PubMed

    Drake, Paul R; Davies, Bethan M

    2006-01-01

    This paper aims to help public sector managers that are formulating strategies for outsourcing home care from the independent sector. A review was performed of relevant literature on the outsourcing of home care and its political drivers in the U.K. This indicates that the future of home care services, taking into consideration outsourcing and how Best Value will be achieved, has not been researched widely. Therefore, an exploratory approach to research was adopted here using in-depth analysis of a small number of particularly informative local authorities and private providers selected by purposive/judgemental (extreme and critical case) sampling. Personal contact was deemed necessary in order to perform an intensive investigation to pursue in-depth information. The British Government's Best Value regime is driving local authorities towards increasing levels of outsourcing in the provision of home care. A local authority may choose to outsource all of its home care or maintain some in-house provision based on capacity or capabilities that are complementary to those provided by the independent sector. The 100 per cent outsourcing strategy places enabling demands on the local authority, whereas the alternative strategy requires decisions to be made on what should be outsourced. Across the authorities surveyed, six strategies for creating a mixed economy of care have been identified, with the mix being based on complementary capacity and/or capabilities. With Best Value driving authorities to consider lower-cost options, the outcome may be a reduction in the amount of complementary capacity provided in-house, in favour of strategies involving complementary capabilities that deliver the Best Value possible. Re-enablement is emerging as a common, complementary or core capability that is remaining in-house. Outsourcing also requires decisions to be made on the number of independent providers to be used and the type of contracts to be employed. This paper considers the

  13. What's to Gain From Facilities Outsourcing?

    ERIC Educational Resources Information Center

    EducationFM, 1998

    1998-01-01

    Presents two interviews in which university facilities managers discuss the pros and cons of outsourcing. Outsourcing is presented as one way to cut costs, but one expert warns that administrators may mistakenly use outsourcing as a temporary solution that entails few savings. Describes some of the reasons behind outsourcing and the challenges it…

  14. Smart aircraft fastener evaluation (SAFE) system: a condition-based corrosion detection system for aging aircraft

    NASA Astrophysics Data System (ADS)

    Schoess, Jeffrey N.; Seifert, Greg; Paul, Clare A.

    1996-05-01

    The smart aircraft fastener evaluation (SAFE) system is an advanced structural health monitoring effort to detect and characterize corrosion in hidden and inaccessible locations of aircraft structures. Hidden corrosion is the number one logistics problem for the U.S. Air Force, with an estimated maintenance cost of $700M per year in 1990 dollars. The SAFE system incorporates a solid-state electrochemical microsensor and smart sensor electronics in the body of a Hi-Lok aircraft fastener to process and autonomously report corrosion status to aircraft maintenance personnel. The long-term payoff for using SAFE technology will be in predictive maintenance for aging aircraft and rotorcraft systems, fugitive emissions applications such as control valves, chemical pipeline vessels, and industrial boilers. Predictive maintenance capability, service, and repair will replace the current practice of scheduled maintenance to substantially reduce operational costs. A summary of the SAFE concept, laboratory test results, and future field test plans is presented.

  15. Optimization in fractional aircraft ownership

    NASA Astrophysics Data System (ADS)

    Septiani, R. D.; Pasaribu, H. M.; Soewono, E.; Fayalita, R. A.

    2012-05-01

    Fractional Aircraft Ownership is a new concept in flight ownership management system where each individual or corporation may own a fraction of an aircraft. In this system, the owners have privilege to schedule their flight according to their needs. Fractional management companies (FMC) manages all aspects of aircraft operations, including utilization of FMC's aircraft in combination of outsourced aircrafts. This gives the owners the right to enjoy the benefits of private aviations. However, FMC may have complicated business requirements that neither commercial airlines nor charter airlines faces. Here, optimization models are constructed to minimize the number of aircrafts in order to maximize the profit and to minimize the daily operating cost. In this paper, three kinds of demand scenarios are made to represent different flight operations from different types of fractional owners. The problems are formulated as an optimization of profit and a daily operational cost to find the optimum flight assignments satisfying the weekly and daily demand respectively from the owners. Numerical results are obtained by Genetic Algorithm method.

  16. Sexual function in F-111 maintenance workers: the study of health outcomes in aircraft maintenance personnel.

    PubMed

    Brown, Anthony; Gibson, Richard; Tavener, Meredith; Guest, Maya; D'Este, Catherine; Byles, Julie; Attia, John; Horsley, Keith; Harrex, Warren; Ross, James

    2009-06-01

    In Australia, four formal F-111 fuel tank deseal/reseal (DSRS) repair programs were implemented over more than two decades, each involving different processes and using a range of hazardous substances. However, health concerns were raised by a number of workers. The "Study of Health Outcomes in Aircraft Maintenance Personnel" was commissioned by the Australian Department of Defence to investigate potential adverse health outcomes as a result of being involved in the deseal/reseal processes. To compare measures of sexual function in F-111 aircraft fuel tank DSRS maintenance workers, against two appropriate comparison groups. Exposed and comparison participants completed a postal questionnaire which included general questions of health and health behavior, and two specific questions on sexual functioning. They also completed the International Index of Erectile Function (IIEF) questionnaire. Logistic regression was used to explore exposure status and outcome while adjusting for potential confounders. The three outcomes of interest for this study were the proportion of participants with erectile dysfunction (ED) according to the IIEF, the proportion with self-reported loss of interest in sex, and the proportion with self-reported problems with sexual functioning. Compared with each of the comparison groups, a larger proportion of the exposed group reported sexual problems and were classified as having ED according to the IIEF. In logistic regression, the odds of all three outcomes were higher for exposed participants relative to each comparison group and after adjustment for potentially confounding variables including anxiety and depression. There was a consistent problem with sexual functioning in the exposed group that is not explained by anxiety and depression, and it appears related to DSRS activities.

  17. Does outsourcing affect hospital profitability?

    PubMed

    Danvers, Kreag; Nikolov, Pavel

    2010-01-01

    Organizations outsource non-core service functions to achieve cost reductions and strategic benefits, both of which can impact profitability performance. This article examines relations between managerial outsourcing decisions and profitability for a multi-state sample of non-profit hospitals, across 16 states and four regions of the United States. Overall regression results indicate that outsourcing does not necessarily improve hospital profitability. In addition, we identify no profitability impact from outsourcing for urban hospitals, but somewhat positive effects for teaching hospitals. Our regional analysis suggests that hospitals located in the Midwest maintain positive profitability effects with outsourcing, but those located in the South realize negative effects. These findings have implications for cost reduction efforts and the financial viability of non-profit hospitals.

  18. Commercial Aircraft Maintenance Experience Relating to Engine External Hardware

    NASA Technical Reports Server (NTRS)

    Soditus, Sharon M.

    2006-01-01

    Airlines are extremely sensitive to the amount of dollars spent on maintaining the external engine hardware in the field. Analysis reveals that many problems revolve around a central issue, reliability. Fuel and oil leakage due to seal failure and electrical fault messages due to wire harness failures play a major role in aircraft delays and cancellations (D&C's) and scheduled maintenance. Correcting these items on the line requires a large investment of engineering resources and manpower after the fact. The smartest and most cost effective philosophy is to build the best hardware the first time. The only way to do that is to completely understand and model the operating environment, study the field experience of similar designs and to perform extensive testing.

  19. Getting the most from outsourcing.

    PubMed

    Mak, C

    1996-04-01

    Outsourcing is common in the business world for its cost saving benefits. This article examines outsourcing as it is used in the Hong Kong healthcare setting for security services and assesses its outcomes in terms of cost, quality, performance, and control. The author reports on several management problems, and makes suggestions for effective outsourcing practices. Hospitals are advised to prepare and manage their contracts as if they were run in-house. Administrators who manage hospitals must examine their operations and try to add value to services where applicable, including outsourced services.

  20. Outsourcing in public hospitals: a Greek perspective.

    PubMed

    Moschuris, Socrates J; Kondylis, Michael N

    2006-01-01

    The purpose of this research is to investigate the extent of outsourcing, the decision-making process, the impact of outsourcing, and the future trend of outsourcing in public hospitals in Greece. A survey instrument was designed and mailed to a random sample of 100 public hospitals in Greece and 43 usable questionnaires were received, representing a response rate of 43 percent. The survey instrument focused on the extent to which public hospitals outsource services, the decision-making process for choosing an external service provider, the impact of outsourcing, and the future trend of outsourcing in public healthcare organisations. Public hospitals in Greece outsource a variety of activities. Cost savings and customer satisfaction are the main factors affecting the outsourcing decision. The cooperation with a contract service provider has led to significant improvement in service quality levels. Most users are satisfied with the performance of these companies and believe that there will be an increase in the usage of these services in the future. It provides a decision-making framework regarding outsourcing in public healthcare organisations. This research fills the gap in the area of outsourcing in public hospitals in Greece.

  1. A maintenance model for k-out-of-n subsystems aboard a fleet of advanced commercial aircraft

    NASA Technical Reports Server (NTRS)

    Miller, D. R.

    1978-01-01

    Proposed highly reliable fault-tolerant reconfigurable digital control systems for a future generation of commercial aircraft consist of several k-out-of-n subsystems. Each of these flight-critical subsystems will consist of n identical components, k of which must be functioning properly in order for the aircraft to be dispatched. Failed components are recoverable; they are repaired in a shop. Spares are inventoried at a main base where they may be substituted for failed components on planes during layovers. Penalties are assessed when failure of a k-out-of-n subsystem causes a dispatch cancellation or delay. A maintenance model for a fleet of aircraft with such control systems is presented. The goals are to demonstrate economic feasibility and to optimize.

  2. Possibilities and pitfalls of outsourcing.

    PubMed

    Hazelwood, Sarah E; Hazelwood, Anita C; Cook, Ellen D

    2005-10-01

    Outsourcing can save healthcare organizations costs related to staffing and training. Organizations should ensure that a vendor's staff is credentialed, knowledgeable, and properly trained. Outsourcing firms should ensure the confidentiality and security of the information they will handle. Outsourcing carries risks for providers, including potentially negative impact on tax-exempt status and loss of control over business processes.

  3. Boo! Outsourcing from the Cataloging Perspective.

    ERIC Educational Resources Information Center

    Hill, Janet Swan

    1998-01-01

    Examines long-accepted ways library cataloging departments have used outsourcing (cataloging records, card production, authority control, card filling, and retrospective conversion) and potential outsourcing activities (original cataloging, and copy cataloging). Discusses reasons why outsourcing is controversial. (PEN)

  4. Environmental Assessment: Construction and Operation of Aircraft Maintenance Hangar Project Number UHHZ023005

    DTIC Science & Technology

    2008-05-12

    Aircraft Maintenance Hangar 2 peaking power generators, boilers , and various sources of fugitive volatile organic compounds (VOCs). There are...nature. The boilers on the base are used primarily for generating steam for comfort heating of the buildings. Natural gas is used as the primary...fuel, with No. 2 Diesel Fuel and Air Mixed Propane as backups for most of the large boilers . 4.3 Air Quality Requirements at Robins AFB Robins AFB is

  5. Skills, rules and knowledge in aircraft maintenance: errors in context

    NASA Technical Reports Server (NTRS)

    Hobbs, Alan; Williamson, Ann

    2002-01-01

    Automatic or skill-based behaviour is generally considered to be less prone to error than behaviour directed by conscious control. However, researchers who have applied Rasmussen's skill-rule-knowledge human error framework to accidents and incidents have sometimes found that skill-based errors appear in significant numbers. It is proposed that this is largely a reflection of the opportunities for error which workplaces present and does not indicate that skill-based behaviour is intrinsically unreliable. In the current study, 99 errors reported by 72 aircraft mechanics were examined in the light of a task analysis based on observations of the work of 25 aircraft mechanics. The task analysis identified the opportunities for error presented at various stages of maintenance work packages and by the job as a whole. Once the frequency of each error type was normalized in terms of the opportunities for error, it became apparent that skill-based performance is more reliable than rule-based performance, which is in turn more reliable than knowledge-based performance. The results reinforce the belief that industrial safety interventions designed to reduce errors would best be directed at those aspects of jobs that involve rule- and knowledge-based performance.

  6. Competition, Speculative Risks, and IT Security Outsourcing

    NASA Astrophysics Data System (ADS)

    Cezar, Asunur; Cavusoglu, Huseyin; Raghunathan, Srinivasan

    Information security management is becoming a more critical and, simultaneously, a challenging function for many firms. Even though many security managers are skeptical about outsourcing of IT security, others have cited reasons that are used for outsourcing of traditional IT functions for why security outsourcing is likely to increase. Our research offers a novel explanation, based on competitive externalities associated with IT security, for firms' decisions to outsource IT security. We show that if competitive externalities are ignored, then a firm will outsource security if and only if the MSSP offers a quality (or a cost) advantage over in-house operations, which is consistent with the traditional explanation for security outsourcing. However, a higher quality is neither a prerequisite nor a guarantee for a firm to outsource security. The competitive risk environment and the nature of the security function outsourced, in addition to quality, determine firms' outsourcing decisions. If the reward from the competitor's breach is higher than the loss from own breach, then even if the likelihood of a breach is higher under the MSSP the expected benefit from the competitive demand externality may offset the loss from the higher likelihood of breaches, resulting in one or both firms outsourcing security. The incentive to outsource security monitoring is higher than that of infrastructure management because the MSSP can reduce the likelihood of breach on both firms and thus enhance the demand externality effect. The incentive to outsource security monitoring (infrastructure management) is higher (lower) if either the likelihood of breach on both firms is lower (higher) when security is outsourced or the benefit (relative to loss) from the externality is higher (lower). The benefit from the demand externality arising out of a security breach is higher when more of the customers that leave the breached firm switch to the non-breached firm.

  7. [Outsourcing. Advantages and disadvantages of these processes with regard to the management from the view of the technical services in a hospital].

    PubMed

    Chen, B

    1999-01-01

    Cost effectiveness and improvement of service quality are the main reasons for outsourcing in hospitals. Long term relationships and customer satisfaction confirm the concept of providing complex services from external specialized companies. There is no standard guideline to determine whether outsourcing should be preferred to inhouse service. Outsourcing is not a guarantee for improved service and a lot of promoted advantages could theoretically also be provided by inhouse service departments. But the effectiveness of inhouse services has to be proven in comparison and competition to external providers. The often named disadvantages of outsourcing have to be considered. Nevertheless they are also not only subject to outsourcing and can also be a problem in inhouse organisations. Furthermore a proper controlling is an important tool to eliminate most of the difficulties in outsourcing projects. In the competition between internal and external service providers concepts of service partnerships that integrate internal and external resources will be the successful ones in the long run. The main potential for improvement is the optimization of the whole process of maintenance management, instead of the mere reduction of head count.

  8. Apply TQM to E-Government Outsourcing Management

    NASA Astrophysics Data System (ADS)

    Huai, Jinmei

    This paper developed an approach to e-government outsourcing quality management. E-government initiatives have rapidly increased in the last decades and the success of these activities will largely depend on their operation quality. As an instrument to improve operation quality, outsourcing can be applied to e-government. This paper inspected process of e-government outsourcing and discussed how to improve the outsourcing performance through total quality management (TQM). The characteristics and special requirements of e-government outsourcing were analyzed as the basis for discussion. Then the principles and application of total quality management were interpreted. Finally the process of improving performance of e-government was analyzed in the context of outsourcing.

  9. Outsourcing CO2 Emissions

    NASA Astrophysics Data System (ADS)

    Davis, S. J.; Caldeira, K. G.

    2009-12-01

    CO2 emissions from the burning of fossil fuels are the primary cause of global warming. Much attention has been focused on the CO2 directly emitted by each country, but relatively little attention has been paid to the amount of emissions associated with consumption of goods and services in each country. This consumption-based emissions inventory differs from the production-based inventory because of imports and exports of goods and services that, either directly or indirectly, involved CO2 emissions. Using the latest available data and reasonable assumptions regarding trans-shipment of embodied carbon through third-party countries, we developed a global consumption-based CO2 emissions inventory and have calculated associated consumption-based energy and carbon intensities. We find that, in 2004, 24% of CO2 emissions are effectively outsourced to other countries, with much of the developed world outsourcing CO2 emissions to emerging markets, principally China. Some wealthy countries, including Switzerland and Sweden, outsource over half of their consumption-based emissions, with many northern Europeans outsourcing more than three tons of emissions per person per year. The United States is both a big importer and exporter of emissions embodied in trade, outsourcing >2.6 tons of CO2 per person and at the same time as >2.0 tons of CO2 per person are outsourced to the United States. These large flows indicate that CO2 emissions embodied in trade must be taken into consideration when considering responsibility for increasing atmospheric greenhouse gas concentrations.

  10. Outsourcing in American Libraries--An Overview.

    ERIC Educational Resources Information Center

    Bordeianu, Sever; Benaud, Claire-Lise

    1997-01-01

    Discusses the state of outsourcing in American libraries. Highlights include objectives (to reduce cost, increase the quality of service, and achieve a better price/performance objective); operations that can be outsourced; pros and cons; changes in the way library personnel view their work; outsourcing in special, public, academic, and federal…

  11. Preventing the cure from being worse than the disease: special issues in hospital outsourcing.

    PubMed

    Beardwood, John; Alleyne, Andrew

    2004-01-01

    Like private sector organizations, hospitals are increasingly outsourcing services from food/cafeteria and security and facilities maintenance to the consulting and training of personnel and information technology (IT) functions. Also like private sector organizations, while hospitals seek the cure that will improve services at less cost, without careful management, the cure can be worse than the disease.

  12. Outsourcing in private healthcare organisations: a Greek perspective.

    PubMed

    Moschuris, Socrates J; Kondylis, Michael N

    2007-01-01

    The purpose of this paper is to present a study carried out to investigate the extent of outsourcing, the decision-making process, the impact of outsourcing, and the future trend of outsourcing in private healthcare organisations in Greece. A survey instrument was designed and mailed to a random sample of 100 private healthcare organisations in Greece. A total of 25 usable questionnaires were received, representing a response rate of 25 percent. The survey instrument focused on the extent to which private healthcare organisations outsource services, the decision-making process for choosing an external service provider, the impact of outsourcing, and the future trend of outsourcing. Private healthcare organisations in Greece outsource a variety of activities. Cost savings, customisation, and customer satisfaction are the main factors affecting the outsourcing decision. The cooperation with a contract service provider has led to an improvement in customer satisfaction and to a cost reduction. Most users are highly satisfied with the performance of these companies and believe that there will be a future increase in the usage of these services. The paper provides a framework regarding outsourcing in private healthcare organisations. This research fills the gap in the area of outsourcing in private healthcare organisations in Greece.

  13. 14 CFR 91.1425 - CAMP: Maintenance, preventive maintenance, and alteration programs.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... RULES Fractional Ownership Operations Program Management § 91.1425 CAMP: Maintenance, preventive maintenance, and alteration programs. Each program manager who maintains program aircraft under a CAMP must... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false CAMP: Maintenance, preventive maintenance...

  14. Outsourcing within aerospace manufacturing enterprises: A phenomenological study and outsourcing leadership model

    NASA Astrophysics Data System (ADS)

    Sampson, Enrique, Jr.

    Many aerospace workers believe transferring work projects abroad has an erosive effect on the U.S. aerospace industry (Pritchard, 2002). This qualitative phenomenological study examines factors for outsourcing decisions and the perceived effects of outsourcing on U.S. aerospace workers. The research sample consists of aerospace industry leaders and nonleaders from the East Coast, Midwest, and West Coast of the United States. Moustakas' modified van Kaam methods of analysis (1994) and Decision Explorer analysis software were applied to the interview transcripts. Resultant data identified five core themes: communication, best value, opportunities, cost, and offset consideration. The themes provided the framework for a model designed to assist leaders in making effective decisions and communicating the benefits of those decisions when considering outsourcing of work projects.

  15. 22 CFR 151.11 - Notification of ownership, maintenance or use of vessel and/or aircraft; evidence of insurance.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Notification of ownership, maintenance or use of vessel and/or aircraft; evidence of insurance. 151.11 Section 151.11 Foreign Relations DEPARTMENT OF STATE DIPLOMATIC PRIVILEGES AND IMMUNITIES COMPULSORY LIABILITY INSURANCE FOR DIPLOMATIC MISSIONS...

  16. 22 CFR 151.11 - Notification of ownership, maintenance or use of vessel and/or aircraft; evidence of insurance.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Notification of ownership, maintenance or use of vessel and/or aircraft; evidence of insurance. 151.11 Section 151.11 Foreign Relations DEPARTMENT OF STATE DIPLOMATIC PRIVILEGES AND IMMUNITIES COMPULSORY LIABILITY INSURANCE FOR DIPLOMATIC MISSIONS...

  17. 22 CFR 151.11 - Notification of ownership, maintenance or use of vessel and/or aircraft; evidence of insurance.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Notification of ownership, maintenance or use of vessel and/or aircraft; evidence of insurance. 151.11 Section 151.11 Foreign Relations DEPARTMENT OF STATE DIPLOMATIC PRIVILEGES AND IMMUNITIES COMPULSORY LIABILITY INSURANCE FOR DIPLOMATIC MISSIONS...

  18. 22 CFR 151.11 - Notification of ownership, maintenance or use of vessel and/or aircraft; evidence of insurance.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Notification of ownership, maintenance or use of vessel and/or aircraft; evidence of insurance. 151.11 Section 151.11 Foreign Relations DEPARTMENT OF STATE DIPLOMATIC PRIVILEGES AND IMMUNITIES COMPULSORY LIABILITY INSURANCE FOR DIPLOMATIC MISSIONS...

  19. 22 CFR 151.11 - Notification of ownership, maintenance or use of vessel and/or aircraft; evidence of insurance.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Notification of ownership, maintenance or use of vessel and/or aircraft; evidence of insurance. 151.11 Section 151.11 Foreign Relations DEPARTMENT OF STATE DIPLOMATIC PRIVILEGES AND IMMUNITIES COMPULSORY LIABILITY INSURANCE FOR DIPLOMATIC MISSIONS...

  20. Taking the pulse of strategic outsourcing relationships.

    PubMed

    Getz, Kenneth A; Lamberti, Mary Jo; Kaitin, Kenneth I

    2014-10-01

    Articles in peer-reviewed journals and the trade press presuppose that strategic outsourcing relationships have been formed to replace preexisting collaborative approaches with contract research organizations. They do not consider that large, fragmented pharmaceutical and biotechnology companies may be supporting competing and conflicting relationship models simultaneously. A recent Tufts Center for the Study of Drug Development study quantifies actual strategic outsourcing practices among drug development companies and sheds new light on why these relationships may be failing. Tufts Center for the Study of Drug Development conducted an in-depth assessment of 43 Phase II and III clinical studies completed since 2012 to examine the outsourcing relationships used by 9 major pharmaceutical and biotechnology companies to support key functional areas. Descriptive statistics were assessed and t tests were performed to characterize outsourcing practices by function and to determine differences in study performance between transactional and strategic outsourcing relationships. The results indicate that sponsor companies are using a variety of outsourcing relationship models to support their studies, mixing and matching the use of internal staff, and using traditional transactional and strategic outsourcing relationships simultaneously. Specifically, despite the fact that each sponsor company had entered into several strategic outsourcing relationships, in no instance did a single contract research organization manage all functional areas supporting an individual Phase II or III study. In addition, sponsor companies vary the types of outsourcing relationship models that they use on a study-by-study basis. The inability of pharmaceutical and biotechnology companies to consistently embrace and coordinate sourcing strategies is creating internal friction and inefficiency. As a result, the expected impact of strategic outsourcing relationships on drug development performance

  1. Outsourcing: friend or foe.

    PubMed

    Capko, Judy

    2005-01-01

    With rising costs and tight controls on reimbursement, physicians need to dig deeper into expenses and find ways to reduce costs while tapping into an equal or higher level of expertise. Outsourcing offers an attractive solution. This article identifies the areas where outsourcing is most valuable and effective, and provides some methodologies for achieving a successful result.

  2. Mission management aircraft operations manual

    NASA Technical Reports Server (NTRS)

    1992-01-01

    This manual prescribes the NASA mission management aircraft program and provides policies and criteria for the safe and economical operation, maintenance, and inspection of NASA mission management aircraft. The operation of NASA mission management aircraft is based on the concept that safety has the highest priority. Operations involving unwarranted risks will not be tolerated. NASA mission management aircraft will be designated by the Associate Administrator for Management Systems and Facilities. NASA mission management aircraft are public aircraft as defined by the Federal Aviation Act of 1958. Maintenance standards, as a minimum, will meet those required for retention of Federal Aviation Administration (FAA) airworthiness certification. Federal Aviation Regulation Part 91, Subparts A and B, will apply except when requirements of this manual are more restrictive.

  3. The Morning After: What Happens When Outsourcing Relationships End?

    NASA Astrophysics Data System (ADS)

    Barney, Hamish T.; Low, Graham C.; Aurum, Aybüke

    Many firms are reevaluating their initial outsourcing decisions for various reasons, including whether the goals set for the outsourcing effort were achieved, changes in the business environment, internal changes, and/or mergers. An increasing number of outsourcing deals are being terminated and backsourced or re-outsourced. According to a recent international industry survey 49% of companies engaged in outsourcing have terminated outsourcing contracts prematurely. Research has not reflected this trend with few studies concentrating on what firms do after they terminate or fail to extend an outsourcing contract. It is argued that there is a need to study this important and increasingly frequent decision. The main contribution of this chapter is to present an outsourcing decision model and demonstrate its applicability with respect to a recent sourcing decision.

  4. 14 CFR 135.419 - Approved aircraft inspection program.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... OPERATING REQUIREMENTS: COMMUTER AND ON DEMAND OPERATIONS AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance, Preventive Maintenance, and Alterations § 135.419 Approved aircraft inspection program. (a... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Approved aircraft inspection program. 135...

  5. 14 CFR 135.419 - Approved aircraft inspection program.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... OPERATING REQUIREMENTS: COMMUTER AND ON DEMAND OPERATIONS AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance, Preventive Maintenance, and Alterations § 135.419 Approved aircraft inspection program. (a... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Approved aircraft inspection program. 135...

  6. 14 CFR 135.419 - Approved aircraft inspection program.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... OPERATING REQUIREMENTS: COMMUTER AND ON DEMAND OPERATIONS AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance, Preventive Maintenance, and Alterations § 135.419 Approved aircraft inspection program. (a... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Approved aircraft inspection program. 135...

  7. 14 CFR 135.419 - Approved aircraft inspection program.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... OPERATING REQUIREMENTS: COMMUTER AND ON DEMAND OPERATIONS AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance, Preventive Maintenance, and Alterations § 135.419 Approved aircraft inspection program. (a... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Approved aircraft inspection program. 135...

  8. 14 CFR 135.419 - Approved aircraft inspection program.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... OPERATING REQUIREMENTS: COMMUTER AND ON DEMAND OPERATIONS AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance, Preventive Maintenance, and Alterations § 135.419 Approved aircraft inspection program. (a... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Approved aircraft inspection program. 135...

  9. Contracting Maintenance Services: An Easy Question, but a Difficult Answer.

    ERIC Educational Resources Information Center

    Geiger, Philip E.

    2003-01-01

    Discusses issues involved in outsourcing school maintenance and custodial services. There are many advantages to this approach, but it has definite drawbacks. In many instances, a combination of contract and employee services works well. (SLD)

  10. Outsourcing Systems Development for e-Learning Applications

    ERIC Educational Resources Information Center

    Brodahl, Cornelia; Oftedahl, Heidi

    2012-01-01

    This study investigated outsourcing of the development of visual, animated and interactive learning objects for mathematics education by a Norwegian university to software vendors in China. It sought to understand the challenges in this outsourcing engagement and competences needed to meet the challenges. The authors tested outsourcing strategies…

  11. Additive Manufacturing (3D Printing) Aircraft Parts and Tooling at the Maintenance Group Level

    DTIC Science & Technology

    The purpose of this research was to evaluate the effectiveness of additive manufacturing (AM) or 3D printing for the Air Force aircraft maintenance...case study of the 552d MXGs 3D printing operation explores their use of a Fused Deposition Modeling (FDM) thermoplastic material to manufacture parts...by applying the case study’s analysis toward a proof of concept, producing a C-130J Aft Cargo Door Rub Strip for 3D printing . The study concluded by

  12. KC-46 Workforce Requirements for Depot Maintenance Activation

    DTIC Science & Technology

    2014-03-27

    commercial derivative aircraft . These are aircraft originally designed for commercial aviation but with modifications that change the aircraft to fit the... designing the process to capture the data needed to infer answers to the research questions. More needs to be understood about how aircraft maintenance...Air Force projects receiving new KC-46 aircraft in 2016 and headquarters is directing organic maintenance. Oklahoma City ALC is the depot projected

  13. Multi-provider architecture for cloud outsourcing of medical imaging repositories.

    PubMed

    Godinho, Tiago Marques; Bastião Silva, Luís A; Costa, Carlos; Oliveira, José Luís

    2014-01-01

    Over the last few years, the extended usage of medical imaging procedures has raised the medical community attention towards the optimization of their workflows. More recently, the federation of multiple institutions into a seamless distribution network has brought hope of increased quality healthcare services along with more efficient resource management. As a result, medical institutions are constantly looking for the best infrastructure to deploy their imaging archives. In this scenario, public cloud infrastructures arise as major candidates, as they offer elastic storage space, optimal data availability without great requirements of maintenance costs or IT personnel, in a pay-as-you-go model. However, standard methodologies still do not take full advantage of outsourced archives, namely because their integration with other in-house solutions is troublesome. This document proposes a multi-provider architecture for integration of outsourced archives with in-house PACS resources, taking advantage of foreign providers to store medical imaging studies, without disregarding security. It enables the retrieval of images from multiple archives simultaneously, improving performance, data availability and avoiding the vendor-locking problem. Moreover it enables load balancing and cache techniques.

  14. 14 CFR 33.90 - Initial maintenance inspection test.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Initial maintenance inspection test. 33.90 Section 33.90 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES Block Tests; Turbine Aircraft Engines § 33.90 Initial maintenance...

  15. 14 CFR 33.90 - Initial maintenance inspection test.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Initial maintenance inspection test. 33.90 Section 33.90 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES Block Tests; Turbine Aircraft Engines § 33.90 Initial maintenance...

  16. 14 CFR 33.90 - Initial maintenance inspection test.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Initial maintenance inspection test. 33.90 Section 33.90 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES Block Tests; Turbine Aircraft Engines § 33.90 Initial maintenance...

  17. 14 CFR 33.90 - Initial maintenance inspection test.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Initial maintenance inspection test. 33.90 Section 33.90 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES Block Tests; Turbine Aircraft Engines § 33.90 Initial maintenance...

  18. Hospital saves $1 million by outsourcing laundry.

    PubMed

    1999-04-01

    Thirty-five percent of hospitals nationwide are outsourcing laundry services, according to the Textile Rental Services Association. Pennsylvania Hospital cut its cost per pound of laundry from 61.5 cents to 46 cents, saving $1 million in its first year of outsourcing. Outsourcing also brought the hospital better inventory control, more efficient delivery, and fewer complaints about missing items.

  19. The adaptation of sustainable biojet fuels and its effect on aircraft engine maintenance

    NASA Astrophysics Data System (ADS)

    Mohd Noh, H.; Rodrigo, G. A.; Rahman, N. A. Abdul

    2016-10-01

    Aviation industries are looking into several resources for renewable and sustainable energy. Among those attention is focused in biojet fuel. This paper engages the issue of biojet fuel emissions that increase the environmental concern in the air transport sector. The paper presents the use of biojet fuel and its effect on aircraft engine maintenance through preliminary data collections, and a review of its development process in operations for time and goal. As conclusion, airlines management needs to adapt and adopt the transition to alternative fuels, especially given the global biofuel trend emerging due to the authority approval.

  20. Critical success factors for mutual collaboration with suppliers in IT outsourcing industry: a case study of a top IT outsourcing company in Korea

    NASA Astrophysics Data System (ADS)

    Cha, Kyung-Jin; Kim, Yang Sok

    2018-01-01

    Nowadays, information technology (IT) outsourcing companies face enduring demands to reduce cost while increasing productivity. This pressure leads many IT outsourcing companies to rely on outsourcing arrangements with IT personnel suppliers. In order to maximise efficiency, outsourcing companies have focused on fostering high-performing suppliers through improved collaboration and mutual relations. However, it is very difficult to advance to a long-term partnership using the existing outsourcing process because of insufficient collaboration between IT outsourcing companies and their suppliers. Based on collaboration perspective of supply chain management (SCM), this study identifies the critical success factors for collaborative strategic partnerships and presents an evaluation framework for assessing and managing suppliers. We have developed an organisational process model for Supplier relationship management (SRM)-based collaboration which includes some of the key constructs from the previous studies and interviews with the IT outsourcing industry people. In this study, we will identify four types of strategic suppliers and suggest approaches for improving collaborative relationship between an IT outsourcing company and its partner companies. In addition, to validate the feasibility of the proposed model, we applied it to a well-known Korean IT outsourcing company 'A'.

  1. Outsourcing decision factors in publicly owned electric utilities

    NASA Astrophysics Data System (ADS)

    Gonzales, James Edward

    Purpose. The outsourcing of services in publicly owned electric utilities has generated some controversy. The purpose of this study was to explore this controversy by investigating the relationships between eight key independent variables and a dependent variable, "manager perceptions of overall value of outsourced services." The intent was to provide data so that utilities could make better decisions regarding outsourcing efforts. Theoretical framework. Decision theory was used as the framework for analyzing variables and alternatives used to support the outsourcing decision-making process. By reviewing these eight variables and the projected outputs and outcomes, a more predictive and potentially successful outsourcing effort can be realized. Methodology. A survey was distributed to a sample of 323 publicly owned electric utilities randomly selected from a population of 2,020 in the United States. Analysis of the data was made using statistical techniques including the Chi-Square, Lambda, Spearman's coefficient of rank correlation, as well as the Hypothesis Test, Rank Correlation, to test for relationships among the variables. Findings. Relationships among the eight key variables and perceptions of the overall value of outsourced services were generally weak. The notable exception was with the driving force (reason) for outsourcing decisions where the relationship was strongly positive. Conclusions and recommendations. The data in support of the research questions suggest that seven of the eight key variables may be weakly predictive of perceptions of the overall value of outsourced services. However, the primary driving force for outsourcing was strongly predictive. The data also suggest that many of the sampled utilities did not formally address these variables and alternatives, and therefore may not be achieving maximal results. Further studies utilizing customer perceptions rather than those of outsourcing service managers are recommended. In addition, it is

  2. Human Factors in Aviation Maintenance. Phase 1

    DTIC Science & Technology

    1991-11-01

    Aircraft Maintenance Information SystemSupyyse AMP ......... Aircraft Maintenance Personnel CRM ....... Cockpit Resource Management AMT... developments were sponsored by the Department of interchange of relevant information between system par- Defense (DoD). Fewer than twenty systems are...ofindividuals without complicating lines ofcommand andothers in the maintenance system is repeated for row "I." orthe allocation ofresponsibility

  3. A Model for Outsourcing HRD

    ERIC Educational Resources Information Center

    Simmonds, David; Gibson, Rebecca

    2008-01-01

    Purpose: The purpose of this paper is to provide an overview of approaches to outsourcing HRD in the UK. Design/methodology/approach: This paper employs semi-structured interviews and case studies. The research model was developed from a literature review. Findings: There are many problems associated with outsourcing any or all aspects of the HRD…

  4. Assessing uncertainty in outsourcing clinical services at tertiary health centers.

    PubMed

    Billi, John E; Pai, Chih-Wen; Spahlinger, David A

    2007-01-01

    When tertiary health centers face capacity constraint, one feasible strategy to meet service demand is outsourcing clinical services to qualified community providers. Clinical outsourcing enables tertiary health centers to meet the expectations of service timeliness and provides good opportunities to collaborate with other health care providers. However, outsourcing may result in dependence and loss of control for the tertiary health centers. Other parties involved in clinical outsourcing such as local partners, patients, and payers may also encounter potential risks as well as enjoy benefits in an outsourcing arrangement. Recommendations on selecting potential outsourcing partners are given to minimize the risks associated with an outsourcing contract. Copyright (c) 2006 John Wiley & Sons, Ltd.

  5. Outsourcing goes to a deeper level.

    PubMed

    Davies, Julie

    2003-12-01

    Medical device manufacturers and diagnostics companies are among the fastest adopters of the outsourcing model. This article outlines how a deeper level of outsourcing is evolving and how this will transform just about every part of a company's business.

  6. Medical transcription outsourcing greased lightning?

    PubMed

    Bikman, Jeremy; Whiting, Stacilee

    2007-06-01

    As medical transcription volume grows, providers need to decide whether to outsource the work, and if so, whether to retain offshore or onshore firms. There are benefits and drawbacks to both. To avoid problems, providers need to make sure the details are spelled out in the contract and that their expectations are understood and met by the outsource firm.

  7. Critical Review--Outsourcing: A Paradigm Shift.

    ERIC Educational Resources Information Center

    Kakabadse, Nada; Kakabadse, Andrew

    2000-01-01

    Discusses trends in outsourcing, provision of goods and services to an organization that were previously delivered in house. Addresses outsourcing in the public sector, advantages and disadvantages, implications for human resource development, and the shift to the new "psychological contract" between employers and employees. (Contains…

  8. Governance Mechanisms in Information Technology Outsourcing

    ERIC Educational Resources Information Center

    Ravindran, Kiron

    2010-01-01

    While the dominance of Information Technology Outsourcing (ITO) as a sourcing strategy would seem to indicate successful and well-informed practice, frequent examples of unraveled engagements highlight the associated risks. Successful instances of outsourcing suggest that governance mechanisms effectively manage the related risks. This…

  9. [Outsourcing in long-term care: a risk management approach].

    PubMed

    Guimarães, Cristina Machado; Carvalho, José Crespo de

    2012-05-01

    This article seeks to investigate outsourcing decisions in supply chain management of healthcare organizations, namely the motives and constraints behind the decision, the selection criteria for activities to be outsourced to third parties, the type of possible agreements, and the impact of this decision on the organization per se. A case study of the start-up phase of a Long-term Care unit with an innovative approach and high levels of customization was conducted to understand the outsourcing process in a start-up context (not in the standard context of organizational change) and a risk evaluation matrix was created for outsourcing activities in order to define and implement a performance monitoring process. This study seeks to understand how to evaluate and assess the risks of an outsourcing strategy and proposes a monitoring model using risk management tools. It was shown that the risk management approach can be a solution for monitoring outsourcing in the organizational start-up phase. Conclusions concerning dissatisfaction with the results of outsourcing strategies adopted are also presented.

  10. [Outsourcing of clinical laboratory department].

    PubMed

    Murai, T

    2000-03-01

    Recently, to improve financial difficulties at various hospitals, outsourcing of the laboratory department is be coming more wide spread. At the department of clinical pathology of St. Luke's International Hospital, the system, so called, "Branch labo" which is one of the outsourcing laboratory conditions, was adopted in March 1999. In this reports. We described the decision procedure for accepting the situation and the circumstances of operation.

  11. Outsourcing in Higher Education. ERIC Digest.

    ERIC Educational Resources Information Center

    Wood, Patricia A.

    Higher education has increasingly turned to outsourcing to improve service in the face of declining resources. Outsourcing has traditionally been used to operate campus bookstores and dining services and has more recently become a legitimate option for additional campus functions, such as facilities operation, computer services, security, child…

  12. [Applying the clustering technique for characterising maintenance outsourcing].

    PubMed

    Cruz, Antonio M; Usaquén-Perilla, Sandra P; Vanegas-Pabón, Nidia N; Lopera, Carolina

    2010-06-01

    Using clustering techniques for characterising companies providing health institutions with maintenance services. The study analysed seven pilot areas' equipment inventory (264 medical devices). Clustering techniques were applied using 26 variables. Response time (RT), operation duration (OD), availability and turnaround time (TAT) were amongst the most significant ones. Average biomedical equipment obsolescence value was 0.78. Four service provider clusters were identified: clusters 1 and 3 had better performance, lower TAT, RT and DR values (56 % of the providers coded O, L, C, B, I, S, H, F and G, had 1 to 4 day TAT values: maintenance service suppliers to be characterised. The cluster technique was effective in identifying the most competitive suppliers.

  13. Don't Outsource It. Do It!

    ERIC Educational Resources Information Center

    Nuzzo, David

    1999-01-01

    Discusses outsourcing in library technical-services departments and how to make the department more cost-effective to limit the need for outsourcing as a less expensive alternative. Topics include experiences at State University of New York at Buffalo; efficient use of computers for in-house programs; and staff participation. (LRW)

  14. Risk assessment of logistics outsourcing based on BP neural network

    NASA Astrophysics Data System (ADS)

    Liu, Xiaofeng; Tian, Zi-you

    The purpose of this article is to evaluate the risk of the enterprises logistics outsourcing. To get this goal, the paper first analysed he main risks existing in the logistics outsourcing, and then set up a risk evaluation index system of the logistics outsourcing; second applied BP neural network into the logistics outsourcing risk evaluation and used MATLAB to the simulation. It proved that the network error is small and has strong practicability. And this method can be used by enterprises to evaluate the risks of logistics outsourcing.

  15. Agricultural outsourcing: A two-headed coin?

    NASA Astrophysics Data System (ADS)

    Azadi, Hossein; Houshyar, Ehsan; Zarafshani, Kiumars; Hosseininia, Gholamhossein; Witlox, Frank

    2013-01-01

    Since two decades ago, when China's economic strength has made this most populated country as a leading global agricultural outsourcer, there have increasingly been hot debates on whether such outsourcing is destructive or constructive, especially for host countries. Some critics pessimistically call it ‘land grabs' or ‘neo-colonialism' that should be prevented while others optimistically appreciate it as a development opportunity that should be promoted. The first group interprets the outsourcing as a win-loss process while the second considers it as a win-win deal. This study tries to show the possible gains and losses of both outsourcers and host countries. Accordingly, this paper introduces four different situations; i.e. loss-loss; win-loss; loss-win; and win-win. The first situation is understood as a ‘red-deal' which should urgently be stopped. The second and third situations are called ‘yellow-deal' which should be adjusted to come up with the last situation which we call ‘green-deal' that addresses the benefits of both outsourcers and outsourcees. The paper concludes that in order to understand the main impacts of such deals, we still need to create more evidence for each situation in the framework of a series of risk assessment studies on the bases of both “country-case” and “crop-case”.

  16. Exposure of aircraft maintenance technicians to organophosphates from hydraulic fluids and turbine oils: a pilot study.

    PubMed

    Schindler, Birgit Karin; Koslitz, Stephan; Weiss, Tobias; Broding, Horst Christoph; Brüning, Thomas; Bünger, Jürgen

    2014-01-01

    Hydraulic fluids and turbine oils contain organophosphates like tricresyl phosphate isomers, triphenyl phosphate and tributyl phosphate from very small up to high percentages. The aim of this pilot study was to determine if aircraft maintenance technicians are exposed to relevant amounts of organophosphates. Dialkyl and diaryl phosphate metabolites of seven organophosphates were quantified in pre- and post-shift spot urine samples of technicians (N=5) by GC-MS/MS after solid phase extraction and derivatization. Pre- and post shift values of tributyl phosphate metabolites (dibutyl phosphate (DBP): median pre-shift: 12.5 μg/L, post-shift: 23.5 μg/L) and triphenyl phosphate metabolites (diphenyl phosphate (DPP): median pre-shift: 2.9 μg/L, post-shift: 3.5 μg/L) were statistically higher than in a control group from the general population (median DBP: <0.25 μg/L, median DPP: 0.5 μg/L). No tricresyl phosphate metabolites were detected. The aircraft maintenance technicians were occupationally exposed to tributyl and triphenyl phosphate but not to tricresyl phosphate, tri-(2-chloroethyl)- and tri-(2-chloropropyl)-phosphate. Further studies are necessary to collect information on sources, routes of uptake and varying exposures during different work tasks, evaluate possible health effects and to set up appropriate protective measures. Copyright © 2013 Elsevier GmbH. All rights reserved.

  17. Maintenance: organizational modes, activities and health and safety. Use of a French national survey and in-situ analyses.

    PubMed

    Grusenmeyer, Corinne

    2014-12-01

    Maintenance activities are identified as critical both to operator safety and to systems safety and reliability. However, it is still difficult to identify maintenance workers in French occupational accident and disease statistics. Moreover, few analyses of these activities and of organizational changes in this field have been conducted. This paper presents two different approaches to this same issue. Analyses were aimed firstly at identifying the occupational exposures of these operators and at comparing them with occupational exposures of production staff and, secondly at developing understanding of normal real maintenance activities, i.e. maintenance activities that are normally actually carried out, while taking into account the socio-technical system and maintenance organization within which they lie. The use of the French SUMER 2003 survey shows that occupational exposures of maintenance staff to various constraints are more frequent than occupational exposures of their production colleagues. However, maintenance staff appear to have greater independence. Analyses were also conducted in a subcontracting urban public transport company, who outsources some maintenance work. Those analyses highlight a complex network of companies involved in maintenance activities, a substantial number of work interruptions and a significant fragmentation of the internal technicians' activities that can be cognitively costly, reduce anticipation possibilities and lead to incidents or accidents. Above all they underline internal technicians' contributions to the completion of outsourced interventions and interdependent relationships between the activities of the internal and the external technicians. Outsourcing maintenance interventions thus raises the question of risks associated with the interdependence of actual work activities undertaken by the different types of staff, since they contribute to the same maintenance intervention. This study therefore pinpoints the need to

  18. IMIS: Integrated Maintenance Information System. A maintenance information delivery concept

    NASA Technical Reports Server (NTRS)

    Vonholle, Joseph C.

    1987-01-01

    The Integrated Maintenance Information System (IMIS) will optimize the use of available manpower, enhance technical performance, improve training, and reduce the support equipment and documentation needed for deployment. It will serve as the technician's single, integrated source of all the technical information required to perform modern aircraft maintenance.

  19. Outsourced Investment Management: An Overview for Institutional Decision-Makers

    ERIC Educational Resources Information Center

    Griswold, John S.; Jarvis, William F.

    2013-01-01

    Outsourcing of investment management is a growing trend among institutional investors. With a broad range of institutions using or exploring the outsourced chief investment officer (OCIO) model, portfolio size is no longer the determining factor driving the outsourcing decision. For all but the largest institutional investors--those with deep…

  20. Medical errors arising from outsourcing laboratory and radiology services.

    PubMed

    Chasin, Brian S; Elliott, Sean P; Klotz, Stephen A

    2007-09-01

    Document errors and the nuisance factor inherent in the informational exchange that occurs with the outsourcing of laboratory and radiology examinations. Three infectious diseases physicians at a tertiary care hospital recorded problems involving data transmitted by telephone or fax from outsource providers for 4 months. This included in- and outpatients, and those in transition from one status to another. Outsourcing laboratory and radiology examinations of insured outpatients is a common practice. Insurance companies determine which healthcare facility performs these tests based on contractual agreements with outsource providers. This leads to confusion and frustration for the doctor and patient alike, and occasionally, to medical error. The exchange of patient data involved in outsourcing is subject to systemic errors that do not allow of easy solution.

  1. Outsourcing Operational Logistics: Buyer Beware

    DTIC Science & Technology

    2003-05-16

    This logistics system takes far too many people to conduct support missions and does not provide the desired customer performance in terms of...FINAL 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER OUTSOURCING OPERATIONAL LOGISTICS: BUYER BEWARE (U) 5b. GRANT NUMBER 5c...Form 298 (Rev. 8-98) 1 (Unclassified Paper) NAVAL WAR COLLEGE Newport, R.I. OUTSOURCING OPERATIONAL LOGISTICS: BUYER BEWARE By LAMONT WOODY Lieutenant

  2. Unrestrained outsourcing in Brazil: more precarization and health risks for workers.

    PubMed

    Druck, Graça

    2016-06-20

    This article discusses the current status of outsourcing in Brazil, with new regulation underway featuring a bill of law under review by the National Congress, aimed at allowing outsourcing for all activities. The authors argue that outsourcing and precarization of work are inseparable phenomena, based on the results of 20 years of research in Brazil that reveals the more precarious working conditions of outsourced workers in different occupational categories. They focus particularly on workers' health: outsourcing of risks has led to more fatal work accidents, invariably at higher rates in outsourced workers. Finally, the article contends that to remove restraints on outsourcing in Brazil amounts to legalizing and legitimizing predatory workforce exploitation, disregarding workers' physical limits, exposing them to risk of fatal accidents, and reverting to forms of work that violate the human condition.

  3. Productivity in the '90s. The outsourcing source book.

    PubMed

    1993-01-01

    Why has outsourcing become a corporate litmus test? Is it the right move for your company? Who's doing it -- and why? Is it both efficient and cost-effective? How should you structure an outsourcing agreement? Here are some answers -- and a lot more questions to ask before you embark on an outsourcing adventure.

  4. Assisting Public Organizations in Their Outsourcing Endeavors: A Decision Support Mode

    NASA Technical Reports Server (NTRS)

    Kremic, TIbor; Tukel, Oya

    2006-01-01

    There has been a tremendous growth in outsourcing practices in recent years. The public organizations in the United States have outsourced some functions and are now being compelled to outsource additional ones. While there are numerous studies that document and analyze outsourcing practices, there is limited research to guide public or governmental organizations in determining what functions to outsource. This study fills this gap by developing a decision support model for a typical public organization in determining what to outsource and how. A set of outsourcing decision factors is identified that can be used as parameters in the three integer programming formulations developed. These formulations are used as solution engines in the model. The first formulation identifies which functions are the best candidates for outsourcing given the organization's priorities. The other formulations place the functions into recommended contracts and re-assign displaced employees. Data from NASA Glenn Research Center in Ohio is used to test and analyze the model. Analysis indicates that cost and skills-related factors are the most sensitive parameters for the data tested. The model and the formulations are a relatively comprehensive package and may help guide outsourcing decisionmakers and policymakers in public organizations.

  5. Outsourcing of IT Services: Studies on Diffusion and New Theoretical Perspectives

    ERIC Educational Resources Information Center

    Mann, Arti

    2012-01-01

    Information technology (IT) outsourcing, including foreign or offshore outsourcing, has been steadily growing over the last two decades. This growth in IT outsourcing has led to the development of different hubs of services across nations, and has resulted in increased competition among service providers. Firms have been using IT outsourcing to…

  6. Aircraft Maintenance Expert Systems.

    DTIC Science & Technology

    1983-11-01

    PARA 2 -104)) 44: (( JETCAL ANALYSIS SHOWS SYSTEM READS CORRECT) (REPLACE FAULTY PARTS)) 45: ((OVERTEMP EXCEEDED SERVICE LIMITS) 46: I(ENGINE CONTROL...CIRCUITS WITHIN LIMITS ON JETCAL ) (REPLACE FAULTY PARTS)) 47: (ADJUST EST AT AMPLIFIER AND CHECK TENP)) (SEND ENGINE TO HIGHER LEVEL MAINTENANCE)) 48: 2

  7. Case outsourcing medical device reprocessing.

    PubMed

    Haley, Deborah

    2004-04-01

    IN THE INTEREST OF SAVING MONEY, many hospitals are considering extending the life of some single-use medical devices by using medical device reprocessing programs. FACILITIES OFTEN LACK the resources required to meet the US Food and Drug Administration's tough quality assurance standards. BY OUTSOURCING, hospitals can reap the benefits of medical device reprocessing without assuming additional staffing and compliance burdens. OUTSOURCING enables hospitals to implement a medical device reprocessing program quickly, with no capital investment and minimal effort.

  8. Outsourcing Agricultural Production: Evidence from Rice Farmers in Zhejiang Province

    PubMed Central

    Ji, Chen; Guo, Hongdong; Jin, Songqing; Yang, Jin

    2017-01-01

    China has recorded positive growth rates of grain production for the past eleven consecutive years. This is a remarkable accomplishment given that China’s rapid industrialization and urbanization has led to a vast reduction of arable land and agricultural labor to non-agricultural sectors. While there are many factors contributing to this happy outcome, one potential contributing factor that has received increasing attention is the emergence of agricultural production outsourcing, a new rural institution that has emerged in recent years. This study aims to contribute to the limited but growing literature on agricultural production outsourcing in China. Specifically, this study analyzes factors affecting farmers’ decisions to outsource any or some production tasks using data from rice farmers in Zhejiang province. Results from a logistic model show that farm size and government subsidy encourages farmers to outsource while ownership of agricultural machines and land fragmentation have negative effects on farmers’ decisions to outsource production tasks. Results also showed that determinants of outsourcing decisions vary with the production tasks that farmers outsourced. PMID:28129362

  9. Outsourcing Agricultural Production: Evidence from Rice Farmers in Zhejiang Province.

    PubMed

    Ji, Chen; Guo, Hongdong; Jin, Songqing; Yang, Jin

    2017-01-01

    China has recorded positive growth rates of grain production for the past eleven consecutive years. This is a remarkable accomplishment given that China's rapid industrialization and urbanization has led to a vast reduction of arable land and agricultural labor to non-agricultural sectors. While there are many factors contributing to this happy outcome, one potential contributing factor that has received increasing attention is the emergence of agricultural production outsourcing, a new rural institution that has emerged in recent years. This study aims to contribute to the limited but growing literature on agricultural production outsourcing in China. Specifically, this study analyzes factors affecting farmers' decisions to outsource any or some production tasks using data from rice farmers in Zhejiang province. Results from a logistic model show that farm size and government subsidy encourages farmers to outsource while ownership of agricultural machines and land fragmentation have negative effects on farmers' decisions to outsource production tasks. Results also showed that determinants of outsourcing decisions vary with the production tasks that farmers outsourced.

  10. Meeting the information system demands of the future through outsourcing.

    PubMed

    Goldman, S J

    1994-05-01

    As managed care organizations work to meet the rigorous data and information requirements of a rapidly evolving health care system, many are recognizing the need to out-source their computer operations. Developing a cost-effective, efficient approach to outsourcing is a challenge to many organizations. This article offers an in-depth view of outsourcing as it relates to the managed health care industry as well as criteria for selecting an outsourcing consultant or vendor.

  11. Outsourcing in the Italian National Health Service: findings from a national survey.

    PubMed

    Macinati, Manuela S

    2008-01-01

    Over the last decade, outsourcing has become one of the major issues in health care. Two major concerns are related to public health care outsourcing practice. The first one involves the suitability of the outsourcing strategy in the public sector, principally with reference to the outsourcing of essential clinical services. The second one relates to the actual benefits of the outsourcing practice in health care, in terms of cost reduction and increasing efficiency. This paper aims to contribute to the debate and literature on outsourcing through a national survey carried out in the Italian National Health Service. In order to achieve the research objective, a questionnaire was developed and, after a pilot test, it was mailed to all Italian public providers. The total response rate was around 42%. Results showed that outsourcing is a widespread phenomenon within health care, especially in the ancillary services area. Moreover, results showed many criticalities of the outsourcing practice in the Italian health-care sector. On the one hand, criticalities concerned the reasons for outsourcing, the characteristics of the outsourced services and the management of the relationship with the vendor. With reference to essential clinical service, outsourcing, as currently managed by health-care providers, may potentially weaken their ability to reach its own objectives. On the other hand, criticalities related to respondent-perceived benefits. Despite the overall positive outsourcing experience expressed in the survey, the results on perceived benefits showed that the effects of outsourcing did not always align to managers' expectations, especially in the cost containment and efficiency area.

  12. Detection of structural deterioration and associated airline maintenance problems

    NASA Technical Reports Server (NTRS)

    Henniker, H. D.; Mitchell, R. G.

    1972-01-01

    Airline operations involving the detection of structural deterioration and associated maintenance problems are discussed. The standard approach to the maintenance and inspection of aircraft components and systems is described. The frequency of inspections and the application of preventive maintenance practices are examined. The types of failure which airline transport aircraft encounter and the steps taken to prevent catastrophic failure are reported.

  13. Brominated flame retardant exposure of aircraft personnel.

    PubMed

    Strid, Anna; Smedje, Greta; Athanassiadis, Ioannis; Lindgren, Torsten; Lundgren, Håkan; Jakobsson, Kristina; Bergman, Åke

    2014-12-01

    The use of brominated flame retardants (BFRs) such as polybrominated diphenyl ethers (PBDEs) in aircraft is the result of high fire safety demands. Personnel working in or with aircraft might therefore be exposed to several BFRs. Previous studies have reported PBDE exposure in flight attendants and in passengers. One other group that may be subjected to significant BFR exposure via inhalation, are the aircraft maintenance workers. Personnel exposure both during flights and maintenance of aircraft, are investigated in the present study. Several BFRs were present in air and dust sampled during both the exposure scenarios; PBDEs, hexabromocyclododecane (HBCDD), decabromodiphenyl ethane (DBDPE) and 1,2-bis (2,4,6-tribromophenoxy) ethane. PBDEs were also analyzed in serum from pilots/cabin crew, maintenance workers and from a control group of individuals without any occupational aircraft exposure. Significantly higher concentrations of PBDEs were found in maintenance workers compared to pilots/cabin crew and control subjects with median total PBDE concentrations of 19, 6.8 and 6.6 pmol g(-1) lipids, respectively. Pilots and cabin crew had similar concentrations of most PBDEs as the control group, except for BDE-153 and BDE-154 which were significantly higher. Results indicate higher concentrations among some of the pilots compared to the cabin crew. It is however, evident that the cabin personnel have lower BFR exposures compared to maintenance workers that are exposed to such a degree that their blood levels are significantly different from the control group. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. A Study of the Risks in an Information System Outsourcing Partnership

    NASA Astrophysics Data System (ADS)

    Ajitkumar, Shabareesh; Bunker, Deborah; Smith, Stephen; Winchester, Donald

    The objective of this paper is to report the findings of a case study into the risks involved in an information systems outsourcing partnership between a retail bank client and the vendor, an information technology service provider. By drawing on the case study, the paper proposes a theoretical development of shared benefits and shared risks in IT outsourcing partnerships. The paper argues that the longevity and success of the outsourcing partnership depends largely on managing shared risks and goals in the outsourcing partnership, which may gradually deteriorate over time without frequent, open interactions between partnership members. The outsourcing partnership contractual agreements alone may have limited scope in contributing to shared risk reduction in the IT outsourcing partnership if relationships deteriorate.

  15. Outsourcing to increase service capacity in a New Zealand hospital.

    PubMed

    Renner, C; Palmer, E

    1999-01-01

    Service firms manage variability using both demand-side tactics (levelling customer demand), and supply-side tactics (increasing available capacity). One popular way of increasing available capacity is the outsourcing of non-core services. This article uses a case study to examine the impact of an outsourced non-core service on a hospital's overall service system. Findings show that the outsourced service provides access to more sophisticated technology, increases in-house capacity and saves capital expenditure. However, the outsourcing also increases the scheduling problems that the hospital faces. These problems are largely due to communication delays from the involvement of more than one organisation. These delays decrease the response time available to match changes in demand for the outsourced service. Given the obvious benefits of such outsourcing, the article concludes that management should pay close attention to the communication pathways between organisations, in order to minimise the end effects identified in this study.

  16. Wrestling with a Trojan Horse: Outsourcing Cataloging in Academic and Special Libraries.

    ERIC Educational Resources Information Center

    Abel-Kops, Chad P.

    2000-01-01

    Focuses the issue of outsourcing cataloging in academic and special libraries. Examines the goal of outsourcing to increase production at reduced costs; a case of outsourcing at Wright State University of Ohio; confidentiality issues of outsourcing by law firms and other corporations; contracts; debates on "whether" and "what"…

  17. Aircraft Ground Operation, Servicing, Fluid Lines and Fittings, Mechanics Privileges and Limitations, and Maintenance Publications, Forms and Records (Course Outline), Aviation Mechanics 1 (Power and Frame): 9073.02.

    ERIC Educational Resources Information Center

    Dade County Public Schools, Miami, FL.

    The course outline consists of five instructional blocks of several units each: (1) Aircraft Ground Operation and Servicing; (2) Fluid Lines and Fittings; (3) Mechanics Requirements, Privileges and Limitations; (4) Maintenance Publications; and, (5) Maintenance forms and Records. It is a basic course of knowledge and skills necessary to any…

  18. A Comparison of Outsourcing in Higher Education, 1998-99 and 2003-04

    ERIC Educational Resources Information Center

    Adams, Olin L.; Guarino, A J.; Robichaux, Rebecca R.; Edwards, Toni L.

    2004-01-01

    This paper explores the nature and extent of outsourcing by higher education institutions, benefits and challenges associated with outsourcing, and the implications of outsourcing for effective management. The principal investigator conducted a national study of outsourcing by four-year colleges and universities at two points in time, 1998-99 and…

  19. Hospital support services and the impacts of outsourcing on occupational health and safety.

    PubMed

    Siganporia, Pearl; Astrakianakis, George; Alamgir, Hasanat; Ostry, Aleck; Nicol, Anne-Marie; Koehoorn, Mieke

    2016-10-01

    Outsourcing labor is linked to negative impacts on occupational health and safety (OHS). In British Columbia, Canada, provincial health care service providers outsource support services such as cleaners and food service workers (CFSWs) to external contractors. This study investigates the impact of outsourcing on the occupational health safety of hospital CFSWs through a mixed methods approach. Worker's compensation data for hospital CFSWs were analyzed by negative binomial and multiple linear regressions supplemented by iterative thematic analysis of telephone interviews of the same job groups. Non-significant decreases in injury rates and days lost per injury were observed in outsourced CFSWs post outsourcing. Significant decreases (P < 0.05) were observed in average costs per injury for cleaners post outsourcing. Outsourced workers interviewed implied instances of underreporting workplace injuries. This mixed methods study describes the impact of outsourcing on OHS of healthcare workers in British Columbia. Results will be helpful for policy-makers and workplace regulators to assess program effectiveness for outsourced workers.

  20. 40 CFR 141.804 - Aircraft water system operations and maintenance plan.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... calendar quarter of initial operation of the aircraft. (e) Any changes to the aircraft water system... 40 Protection of Environment 24 2012-07-01 2012-07-01 false Aircraft water system operations and...) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Aircraft Drinking Water Rule...

  1. 40 CFR 141.804 - Aircraft water system operations and maintenance plan.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... calendar quarter of initial operation of the aircraft. (e) Any changes to the aircraft water system... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Aircraft water system operations and...) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Aircraft Drinking Water Rule...

  2. 14 CFR 43.7 - Persons authorized to approve aircraft, airframes, aircraft engines, propellers, appliances, or...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... data approved by the Administrator. (e) The holder of an air carrier operating certificate or an... holder of a repairman certificate (light-sport aircraft) with a maintenance rating may approve an aircraft issued a special airworthiness certificate in light-sport category for return to service, as...

  3. Outsourcing to win.

    PubMed

    Fink, Paul; Skeen, James

    2007-01-01

    The decision to outsource the manufacture of an entire device can be difficult, yet the advantages of this business strategy are huge. The important elements of the process are examined here so that companies can adopt this approach with confidence.

  4. Healthcare Information Technology Backsourcing, Problematic Outsourcing Manipulations, and Multisupplier Backsourcing Methodologies

    ERIC Educational Resources Information Center

    Garske, Steven Ray

    2010-01-01

    Backsourcing is the act of an organization changing an outsourcing relationship through insourcing, vendor change, or elimination of the outsourced service. This study discovered numerous problematic outsourcing manipulations conducted by suppliers, and identified backsourcing methodologies to correct these manipulations across multiple supplier…

  5. Aviation Maintenance Technology. Course Content Guides. FAA Approved Curriculum.

    ERIC Educational Resources Information Center

    Shrawder, Jack; And Others

    Course content guides are provided for the 30 courses in this aviation maintenance technology curriculum approved by the Federal Aviation Administration. Course titles are physics for technicians; aircraft information, regulations, and procedures; aircraft assembly; fundamentals of aircraft electronics; aircraft electrical components; aircraft…

  6. Hospital support services and the impacts of outsourcing on occupational health and safety

    PubMed Central

    Alamgir, Hasanat; Ostry, Aleck; Nicol, Anne-Marie; Koehoorn, Mieke

    2016-01-01

    Background Outsourcing labor is linked to negative impacts on occupational health and safety (OHS). In British Columbia, Canada, provincial health care service providers outsource support services such as cleaners and food service workers (CFSWs) to external contractors. Objectives This study investigates the impact of outsourcing on the occupational health safety of hospital CFSWs through a mixed methods approach. Methods Worker’s compensation data for hospital CFSWs were analyzed by negative binomial and multiple linear regressions supplemented by iterative thematic analysis of telephone interviews of the same job groups. Results Non-significant decreases in injury rates and days lost per injury were observed in outsourced CFSWs post outsourcing. Significant decreases (P < 0.05) were observed in average costs per injury for cleaners post outsourcing. Outsourced workers interviewed implied instances of underreporting workplace injuries. Conclusions This mixed methods study describes the impact of outsourcing on OHS of healthcare workers in British Columbia. Results will be helpful for policy-makers and workplace regulators to assess program effectiveness for outsourced workers. PMID:27696988

  7. Determination of the flight equipment maintenance costs of commuter airlines

    NASA Technical Reports Server (NTRS)

    1977-01-01

    Labor and materials costs associated with maintaining and operating 12 commuter airlines carrying an average of from 42 to 1,100 passengers daily in a variety of aircraft types were studied to determine the total direct maintenance cost per flight hour for the airframe, engine, and avionics and other instruments. The distribution of maintenance costs are analyzed for two carriers, one using turboprop aircraft and the other using piston engine aircraft.

  8. Explaining Outsourcing in Health, Sport and Physical Education

    ERIC Educational Resources Information Center

    Williams, Benjamin J.; Macdonald, Doune

    2015-01-01

    Outsourcing is a complex, controversial and pervasive practice that is increasingly becoming a matter of concern for educational researchers. This article contributes to this literature by examining outsourcing practices related to health, sport and physical education (HSPE). Specifically, it reports data on specialist health and physical…

  9. Outsourcing Support Services.

    ERIC Educational Resources Information Center

    McClure, James A.

    2000-01-01

    Successful outsourcing is a learning process demanding careful planning, commitment, and heavy communication. The process also requires a strong leadership and a cohesive school board ready to weather a cultural change. Service employee options, contractors' managerial expertise, increased efficiency, and partnership opportunities are possible…

  10. Outsourcing in Higher Education: The Known and Unknown about the Practice

    ERIC Educational Resources Information Center

    Wekullo, Caroline Sabina

    2017-01-01

    Outsourcing or privatising services in higher education is a common practice, but what do we really know about it? Is outsourcing effective? It is imperative that these questions be addressed since outsourcing is becoming a norm in higher education institutions. Scholars, institutional administrators and policymakers need to understand the…

  11. A Study of Information Systems Outsourcing Influential Factors.

    ERIC Educational Resources Information Center

    Claver, Enrique; Gonzalez, Reyes; Gasco, Jose; Llopis, Juan

    2002-01-01

    Surveyed information systems managers at Spanish public universities to determine the level of information systems outsourcing. Also determined how factors such as the size of universities and their information systems departments, as well as the degree of involvement of rector's and general manager's teams, influence outsourcing levels. (EV)

  12. Outsourcing gets providers back to the basics.

    PubMed

    Watson, S

    1995-05-01

    Information technology is advancing so quickly that many organizations can't keep up. That's why demand for the outsourcing of data processing functions is growing as providers and payers attempt to implement the latest technology while holding costs down. Those investigating outsourcing must carefully scrutinize whether an arrangement actually will cut costs, experts advise. And clients should review contract terms to ensure all expectations are spelled out.

  13. Bioanalytical outsourcing strategy at Janssen Research and Development.

    PubMed

    Verhaeghe, Tom

    2014-05-01

    The times when all bioanalytical work was supported in-house are long behind us. In the modern bioanalytical laboratory, workload is divided between in-house support and outsourcing to contract research organizations. This paper outlines the outsourcing strategy of the Janssen-regulated bioanalytical group. Keeping the knowledge of the assay and the compound internally is a cornerstone of this strategy and is a driver for balancing the workload between the internal laboratory and contract laboratories. The number of contract laboratories that are being used is limited and criteria for selecting laboratories are discussed. Special attention is paid to the experience with outsourcing clinical studies to China.

  14. Outsourcing to China.

    PubMed

    Liu, Jacqueline

    2004-12-01

    To enhance competitive advantage in the face of increasing globalisation, companies need to consider moving certain operations to China, if they have not done so already. This article describes the evolving nature of outsourcing to China and what companies need to consider to be successful in this business model.

  15. 40 CFR 141.804 - Aircraft water system operations and maintenance plan.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Aircraft Drinking Water Rule... must include the following requirements for procedures for disinfection and flushing of aircraft water system. (i) The air carrier must conduct disinfection and flushing of the aircraft water system in...

  16. 14 CFR 43.17 - Maintenance, preventive maintenance, and alterations performed on U.S. aeronautical products by...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... maintenance, or alteration is performed in accordance with a Bilateral Aviation Safety Agreement between the... recorded in accordance with a Bilateral Aviation Safety Agreement between the United States and Canada and... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT MAINTENANCE...

  17. Benefits of Outsourcing Strategy and IT Technology in Clinical Trials.

    PubMed

    Stamenovic, Milorad; Dobraca, Amra

    2017-09-01

    Aim of this paper is to describe some of models of outsourcing (numerous and response to different types of risks and increment of quality is based on individual problem and situation). Defining whether to outsource or not and whether to build or buy new information technology (IT) is question for contract research organization (CRO) and Pharma companies dealing with clinical trials, so the aim of this paper is to show business model that could make process of decision making less time consuming, less segmented and more efficient. This paper has a descriptive character, and represents a review of the literature that deals with the described issues. Outsourcing should enable optimal capacity flexibility (technology that is outsourced should be done only optimally not entirely). The goal with CRO partners is to establish equivalent levels of global quality, as extensions of other research and development activities (by unification of standards of performance of alliance partners with best standards of industry). IT is gaining greater significance at each stage of clinical study and represent an inevitable element of the quality of a clinical study (for the purpose of monitoring of clinical site activities, data collection and management, medical monitoring, statistical programming, statistical analysis, clinical study reporting). CROs are able to maximize work within the CRO global development, to support the notion of a fully integrated outsourced company; facilitate the use of similar business processes and norms, reusing established CRO standards and improve CRO operational decision making within outsourced studies by providing consistent and current information across outsourced and in-house activities.

  18. Outsourcing of Domestic Tasks and Time-Saving Effects

    ERIC Educational Resources Information Center

    van der Lippe, Tanja; Tijdens, Kea; de Ruijter, Esther

    2004-01-01

    The increased participation of women in paid labor has changed the organization of domestic work. This article deals with a strategy to cope with remaining domestic duties; to what extent are domestic tasks outsourced, what are the main determinants, and does it indeed save time spent on housework? Five outsourcing options are investigated:…

  19. 14 CFR 91.421 - Rebuilt engine maintenance records.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Rebuilt engine maintenance records. 91.421..., Preventive Maintenance, and Alterations § 91.421 Rebuilt engine maintenance records. (a) The owner or operator may use a new maintenance record, without previous operating history, for an aircraft engine...

  20. 14 CFR 91.421 - Rebuilt engine maintenance records.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 2 2012-01-01 2012-01-01 false Rebuilt engine maintenance records. 91.421..., Preventive Maintenance, and Alterations § 91.421 Rebuilt engine maintenance records. (a) The owner or operator may use a new maintenance record, without previous operating history, for an aircraft engine...

  1. Navy composite maintenance and repair experience

    NASA Technical Reports Server (NTRS)

    Donnellan, T. M.; Cochran, R. C.; Rosenzweig, E. L.; Trabocco, R. E.

    1992-01-01

    The Navy has been a strong proponent of composites for aircraft structure. Fleet use of composites started with the F-14 in the early 1970's and has steadily increased. This experience base provides sufficient information to allow an evaluation of the maintenance performance of polymer composites in service. A summary is presented of the Navy's experience with maintenance of composite structure. The general types of damage experienced in the fleet as well as specific examples of composite damage to aircraft is described. The impact of future designs on supportability is also discussed.

  2. Outsourcing and scheduling for a two-machine flow shop with release times

    NASA Astrophysics Data System (ADS)

    Ahmadizar, Fardin; Amiri, Zeinab

    2018-03-01

    This article addresses a two-machine flow shop scheduling problem where jobs are released intermittently and outsourcing is allowed. The first operations of outsourced jobs are processed by the first subcontractor, they are transported in batches to the second subcontractor for processing their second operations, and finally they are transported back to the manufacturer. The objective is to select a subset of jobs to be outsourced, to schedule both the in-house and the outsourced jobs, and to determine a transportation plan for the outsourced jobs so as to minimize the sum of the makespan and the outsourcing and transportation costs. Two mathematical models of the problem and several necessary optimality conditions are presented. A solution approach is then proposed by incorporating the dominance properties with an ant colony algorithm. Finally, computational experiments are conducted to evaluate the performance of the models and solution approach.

  3. Outsourcing lead optimization: the eye of the storm.

    PubMed

    Clark, David E

    2011-02-01

    This article is the third in a series examining the evolution of the market for outsourced lead optimization services and covers developments from late 2006 to the present. Following an analysis of the significant events that have impacted the marketplace in recent years, a brief survey of the growing number of companies offering lead optimization services is presented. Subsequently, three notable trends that can be perceived in this highly dynamic field are discussed: the continuing rise of outsourcing companies in Asia and Eastern Europe, the increase in deals with not-for-profit organizations and, finally, the emergence of a variety of business models under which outsourced work is conducted. Copyright © 2010 Elsevier Ltd. All rights reserved.

  4. [Outsourced services and their consequences for nursing care].

    PubMed

    Zamberlan, Cláudia; de Siqueira, Heidi Crecência Heckler

    2005-01-01

    This experience report intends to turn visible and to share with other professionals a practical experiment. The influence of outsourced services is emphasized in the process of nursing care, focusing the difficulties found, in the same institution, in the units not outsourced related to nursing care and problem resolution of clients submitted to hemodynamics procedures that are hospitalized after the intervention and/or return to common units of the Institution which services are outsourced. The experience evidences the need of a integrated team between the two services, using the continuing education as a way to rescue fundamental knowledge for clients' integral care, as well as a more committed profession with the being and making nursing.

  5. Multi-objective decision-making model based on CBM for an aircraft fleet

    NASA Astrophysics Data System (ADS)

    Luo, Bin; Lin, Lin

    2018-04-01

    Modern production management patterns, in which multi-unit (e.g., a fleet of aircrafts) are managed in a holistic manner, have brought new challenges for multi-unit maintenance decision making. To schedule a good maintenance plan, not only does the individual machine maintenance have to be considered, but also the maintenance of the other individuals have to be taken into account. Since most condition-based maintenance researches for aircraft focused on solely reducing maintenance cost or maximizing the availability of single aircraft, as well as considering that seldom researches concentrated on both the two objectives: minimizing cost and maximizing the availability of a fleet (total number of available aircraft in fleet), a multi-objective decision-making model based on condition-based maintenance concentrated both on the above two objectives is established. Furthermore, in consideration of the decision maker may prefer providing the final optimal result in the form of discrete intervals instead of a set of points (non-dominated solutions) in real decision-making problem, a novel multi-objective optimization method based on support vector regression is proposed to solve the above multi-objective decision-making model. Finally, a case study regarding a fleet is conducted, with the results proving that the approach efficiently generates outcomes that meet the schedule requirements.

  6. Novel methods for aircraft corrosion monitoring

    NASA Astrophysics Data System (ADS)

    Bossi, Richard H.; Criswell, Thomas L.; Ikegami, Roy; Nelson, James; Normand, Eugene; Rutherford, Paul S.; Shrader, John E.

    1995-07-01

    Monitoring aging aircraft for hidden corrosion is a significant problem for both military and civilian aircraft. Under a Wright Laboratory sponsored program, Boeing Defense & Space Group is investigating three novel methods for detecting and monitoring hidden corrosion: (1) atmospheric neutron radiography, (2) 14 MeV neutron activation analysis and (3) fiber optic corrosion sensors. Atmospheric neutron radiography utilizes the presence of neutrons in the upper atmosphere as a source for interrogation of the aircraft structure. Passive track-etch neutron detectors, which have been previously placed on the aircraft, are evaluated during maintenance checks to assess the presence of corrosion. Neutrons generated by an accelerator are used via activation analysis to assess the presence of distinctive elements in corrosion products, particularly oxygen. By using fast (14 MeV) neutrons for the activation, portable, high intensity sources can be employed for field testing of aircraft. The third novel method uses fiber optics as part of a smart structure technology for corrosion detection and monitoring. Fiber optic corrosion sensors are placed in the aircraft at locations known to be susceptible to corrosion. Periodic monitoring of the sensors is used to alert maintenance personnel to the presence and degree of corrosion at specific locations on the aircraft. During the atmospheric neutron experimentation, we identified a fourth method referred to as secondary emission radiography (SER). This paper discusses the development of these methods.

  7. Evaluating Outsourcing Information Technology and Assurance Expertise by Small Non-Profit Organizations

    ERIC Educational Resources Information Center

    Guinn, Fillmore

    2013-01-01

    Small non-profit organizations outsource at least one information technology or information assurance process. Outsourcing information technology and information assurance processes has increased every year. The study was to determine the key reasons behind the choice to outsource information technology and information assurance processes. Using…

  8. Competent statistical programmer: Need of business process outsourcing industry

    PubMed Central

    Khan, Imran

    2014-01-01

    Over the last two decades Business Process Outsourcing (BPO) has evolved as much mature practice. India is looked as preferred destination for pharmaceutical outsourcing over a cost arbitrage. Among the biometrics outsourcing, statistical programming and analysis required very niche skill for service delivery. The demand and supply ratios are imbalance due to high churn out rate and less supply of competent programmer. Industry is moving from task delivery to ownership and accountability. The paradigm shift from an outsourcing to consulting is triggering the need for competent statistical programmer. Programmers should be trained in technical, analytical, problem solving, decision making and soft skill as the expectations from the customer are changing from task delivery to accountability of the project. This paper will highlight the common issue SAS programming service industry is facing and skills the programmers need to develop to cope up with these changes. PMID:24987578

  9. Competent statistical programmer: Need of business process outsourcing industry.

    PubMed

    Khan, Imran

    2014-07-01

    Over the last two decades Business Process Outsourcing (BPO) has evolved as much mature practice. India is looked as preferred destination for pharmaceutical outsourcing over a cost arbitrage. Among the biometrics outsourcing, statistical programming and analysis required very niche skill for service delivery. The demand and supply ratios are imbalance due to high churn out rate and less supply of competent programmer. Industry is moving from task delivery to ownership and accountability. The paradigm shift from an outsourcing to consulting is triggering the need for competent statistical programmer. Programmers should be trained in technical, analytical, problem solving, decision making and soft skill as the expectations from the customer are changing from task delivery to accountability of the project. This paper will highlight the common issue SAS programming service industry is facing and skills the programmers need to develop to cope up with these changes.

  10. Outsourcing primary health care services--how politicians explain the grounds for their decisions.

    PubMed

    Laamanen, Ritva; Simonsen-Rehn, Nina; Suominen, Sakari; Øvretveit, John; Brommels, Mats

    2008-12-01

    To explore outsourcing of primary health care (PHC) services in four municipalities in Finland with varying amounts and types of outsourcing: a Southern municipality (SM) which contracted all PHC services to a not-for-profit voluntary organization, and Eastern (EM), South-Western (SWM) and Western (WM) municipalities which had contracted out only a few services to profit or public organizations. A mail survey to all municipality politicians (response rate 52%, N=101) in 2004. Data were analyzed using cross-tabulations, Spearman correlation and linear regression analyses. Politicians were willing to outsource PHC services only partially, and many problems relating to outsourcing were reported. Politicians in all municipalities were least likely to outsource preventive services. A multiple linear regression model showed that reported preference to outsource in EM and in SWM was lower than in SM, and also lower among politicians from "leftist" political parties than "rightist" political parties. Perceived difficulties in local health policy issues were related to reduced preference to outsource. The model explained 27% of the variance of the inclination to outsource PHC services. The findings highlight how important it is to take into account local health policy issues when assessing service-provision models.

  11. [The challenges and opportunities of implementing outsourcing in private and public hospitals in Israel].

    PubMed

    Rahimi, Benny; Mizrahi, Ronit; Magnezi, Racheli

    2011-01-01

    Outsourcing is a method that enables an organization to focus on its expertise by transferring its other services to professionals who can fulfill them. In recent years, research has repeatedly shown that health services use a variety of outsourcing companies. To describe the experience acquired using outsourcing in public and private hospitals in Israel, and to present the factors, budgetary parameters, opportunities and problems affecting outsourcing. The questionnaire was sent to 36 hospitals in Israel, constituting 88.2% of all hospitals in Israel--private, public, H.M.O ("Clalit") and governmental. The response to the questionnaire reached 97.2% and revealed the following: 94% of the hospitals use outsourcing services in the following fields: security, cleaning, Laundry service, cafeterias, and I.T.; 42% of the hospitals assign 0-5% of their annual budget for outsourcing contracts. Private hospitals use more outsourcing services than public hospitals. The factors driving outsourcing are: cost restrictions (82.8%), operational flexibility (77%), and focus on the core business (74.2%). The potential advantages of outsourcing are: improvement in services 180.5%), customer satisfaction (72.2%), and cost reduction (69.4%). Difficulties affecting outsourcing are: dependence on external resources (83.3%] and internal organizational resistance (69.4%). The results of the outsourcing are lower costs, reduced number of personnel by 1-10% and high level of satisfaction. It seems that in recent years outsourcing is being used in hospitals and is central to the areas of infrastructure and logistics, as well as legal and medical services. Using outsourcing in hospitals provides opportunities for improved customer satisfaction, better focus for the hospital on its core activities and cost reduction. HospitaLs that succeed in synergetically integrating the external and the internal service providers will flourish. INNOVATION/VALUE: This research exposes, for the first time

  12. Analysis of an ABE Scheme with Verifiable Outsourced Decryption.

    PubMed

    Liao, Yongjian; He, Yichuan; Li, Fagen; Jiang, Shaoquan; Zhou, Shijie

    2018-01-10

    Attribute-based encryption (ABE) is a popular cryptographic technology to protect the security of users' data in cloud computing. In order to reduce its decryption cost, outsourcing the decryption of ciphertexts is an available method, which enables users to outsource a large number of decryption operations to the cloud service provider. To guarantee the correctness of transformed ciphertexts computed by the cloud server via the outsourced decryption, it is necessary to check the correctness of the outsourced decryption to ensure security for the data of users. Recently, Li et al. proposed a full verifiability of the outsourced decryption of ABE scheme (ABE-VOD) for the authorized users and unauthorized users, which can simultaneously check the correctness of the transformed ciphertext for both them. However, in this paper we show that their ABE-VOD scheme cannot obtain the results which they had shown, such as finding out all invalid ciphertexts, and checking the correctness of the transformed ciphertext for the authorized user via checking it for the unauthorized user. We first construct some invalid ciphertexts which can pass the validity checking in the decryption algorithm. That means their "verify-then-decrypt" skill is unavailable. Next, we show that the method to check the validity of the outsourced decryption for the authorized users via checking it for the unauthorized users is not always correct. That is to say, there exist some invalid ciphertexts which can pass the validity checking for the unauthorized user, but cannot pass the validity checking for the authorized user.

  13. Analysis of an ABE Scheme with Verifiable Outsourced Decryption

    PubMed Central

    He, Yichuan; Li, Fagen; Jiang, Shaoquan; Zhou, Shijie

    2018-01-01

    Attribute-based encryption (ABE) is a popular cryptographic technology to protect the security of users’ data in cloud computing. In order to reduce its decryption cost, outsourcing the decryption of ciphertexts is an available method, which enables users to outsource a large number of decryption operations to the cloud service provider. To guarantee the correctness of transformed ciphertexts computed by the cloud server via the outsourced decryption, it is necessary to check the correctness of the outsourced decryption to ensure security for the data of users. Recently, Li et al. proposed a full verifiability of the outsourced decryption of ABE scheme (ABE-VOD) for the authorized users and unauthorized users, which can simultaneously check the correctness of the transformed ciphertext for both them. However, in this paper we show that their ABE-VOD scheme cannot obtain the results which they had shown, such as finding out all invalid ciphertexts, and checking the correctness of the transformed ciphertext for the authorized user via checking it for the unauthorized user. We first construct some invalid ciphertexts which can pass the validity checking in the decryption algorithm. That means their “verify-then-decrypt” skill is unavailable. Next, we show that the method to check the validity of the outsourced decryption for the authorized users via checking it for the unauthorized users is not always correct. That is to say, there exist some invalid ciphertexts which can pass the validity checking for the unauthorized user, but cannot pass the validity checking for the authorized user. PMID:29320418

  14. The Outsourcing Question

    ERIC Educational Resources Information Center

    Sack-Min, Joetta

    2008-01-01

    It sounds tempting, especially in tough fiscal times: Hand over all the responsibility for food service management to a private company promising to provide nutritious and appetizing meals, keep up with increasingly complex regulations, and perhaps even make a profit. Privatization, or outsourcing, has worked well for some districts for years, but…

  15. Navy Maintenance: The P-3 Aircraft Overhaul Program Can Be Improved.

    DTIC Science & Technology

    1987-06-01

    Air Sys- tems Command’s Naval Aviation Logistics Center, we obtained data on aircraft turnaround times, mobilization requirements, and aircraft over...480 561 637 P-3 Workload as a Percent of 23 22 25 27 Total FINDING Z: Aplicability of Procedural Changes To Other Aircraft. The GAO observed that the

  16. Employees' views on outsourcing and its impact on employee turnover: A phenomenological study

    NASA Astrophysics Data System (ADS)

    Przybelinski, Steven A.

    Increasing use of outsourcing gives employees concern about personal job security. Using a modified van Kaam approach, this qualitative phenomenological study examined perceptions and experiences of 12 employees' on the influence outsourcing had on employee turnover. Five themes describing employee perceptions emerged: (a) preparation---education gives job security, (b) plausibility---all believed job loss plausible, (c) emotional influence---feelings of stress, threat, betrayal, and not being valued, (d) environment---value of communication and interaction with leaders, and (e) confidence---gained from increased education, skills, and knowledge protected from outsourcing. Significance of this study to leadership is the identification of employee perceptions of outsourcing and motivating factors influencing employee turnover during times of outsourcing. Findings might present new information and assist leaders with employee retention concerns for future outsourcing activities.

  17. A Multi-Stage Maturity Model for Long-Term IT Outsourcing Relationship Success

    ERIC Educational Resources Information Center

    Luong, Ming; Stevens, Jeff

    2015-01-01

    The Multi-Stage Maturity Model for Long-Term IT Outsourcing Relationship Success, a theoretical stages-of-growth model, explains long-term success in IT outsourcing relationships. Research showed the IT outsourcing relationship life cycle consists of four distinct, sequential stages: contract, transition, support, and partnership. The model was…

  18. Benefits of Outsourcing Strategy and IT Technology in Clinical Trials

    PubMed Central

    Stamenovic, Milorad; Dobraca, Amra

    2017-01-01

    Introduction: Aim of this paper is to describe some of models of outsourcing (numerous and response to different types of risks and increment of quality is based on individual problem and situation). Defining whether to outsource or not and whether to build or buy new information technology (IT) is question for contract research organization (CRO) and Pharma companies dealing with clinical trials, so the aim of this paper is to show business model that could make process of decision making less time consuming, less segmented and more efficient. Material and methods: This paper has a descriptive character, and represents a review of the literature that deals with the described issues. Results: Outsourcing should enable optimal capacity flexibility (technology that is outsourced should be done only optimally not entirely). The goal with CRO partners is to establish equivalent levels of global quality, as extensions of other research and development activities (by unification of standards of performance of alliance partners with best standards of industry). IT is gaining greater significance at each stage of clinical study and represent an inevitable element of the quality of a clinical study (for the purpose of monitoring of clinical site activities, data collection and management, medical monitoring, statistical programming, statistical analysis, clinical study reporting). Conclusion: CROs are able to maximize work within the CRO global development, to support the notion of a fully integrated outsourced company; facilitate the use of similar business processes and norms, reusing established CRO standards and improve CRO operational decision making within outsourced studies by providing consistent and current information across outsourced and in-house activities. PMID:29114116

  19. Task Analysis - Aircraft Structural Maintenance AFSC 458X2

    DTIC Science & Technology

    1989-08-01

    GAGES OR METERS 13 10 23 SELECT WEIGHT MEASURING SCALES 15 6 21 RECALL TYPES, PROPERTIES, AND CHARACTERISTICS 8 11 19 OF PLASTICS SELECT COMMON...SURFACES (K0494) 121 00480 SHOT PEEN METAL SURFACES (K0498) 123 00490 BALANCE AIRCRAFT CONTROL SURFACES 125 00500 CLEAN PLASTICS (0275) 127 00510...STORE TRANSPARENT PLASTICS IN PROPER ENVIRONMENT (J0299) 128 00520 POLISH OUT SURFACE SCRATCHES 129 00530 CUT PLASTICS 131 00540 RESEARCH AIRCRAFT

  20. Outsourcing Technology in Government: Owned, Controlled, or Regulated Institutions.

    ERIC Educational Resources Information Center

    Gordon, Mark L.; Walsh, Timothy P.

    1997-01-01

    Examines the growing trend toward and objectives of government outsourcing of information technology (IT) both in the United States and around the world. Describes representative outsourcing arrangements; highlights steps governments should take to ensure that objectives are met; and discusses factors influencing management of public sector…

  1. Augmented reality application utility for aviation maintenance work instruction

    NASA Astrophysics Data System (ADS)

    Pourcho, John Bryan

    Current aviation maintenance work instructions do not display information effectively enough to prevent costly errors and safety concerns. Aircraft are complex assemblies of highly interrelated components that confound troubleshooting and can make the maintenance procedure difficult (Drury & Gramopadhye, 2001). The sophisticated nature of aircraft maintenance necessitates a revolutionized training intervention for aviation maintenance technicians (United States General Accounting Office, 2003). Quite simply, the paper based job task cards fall short of offering rapid access to technical data and the system or component visualization necessary for working on complex integrated aircraft systems. Possible solutions to this problem include upgraded standards for paper based task cards and the use of integrated 3D product definition used on various mobile platforms (Ropp, Thomas, Lee, Broyles, Lewin, Andreychek, & Nicol, 2013). Previous studies have shown that incorporation of 3D graphics in work instructions allow the user to more efficiently and accurately interpret maintenance information (Jackson & Batstone, 2008). For aircraft maintenance workers, the use of mobile 3D model-based task cards could make current paper task card standards obsolete with their ability to deliver relevant, synchronized information to and from the hangar. Unlike previous versions of 3D model-based definition task cards and paper task cards, which are currently used in the maintenance industry, 3D model based definition task cards have the potential to be more mobile and accessible. Utilizing augmented reality applications on mobile devices to seamlessly deliver 3D product definition on mobile devices could increase the efficiency, accuracy, and reduce the mental workload for technicians when performing maintenance tasks (Macchiarella, 2004). This proposal will serve as a literary review of the aviation maintenance industry, the spatial ability of maintenance technicians, and benefits of

  2. Are You Ready To Discuss IT Outsourcing on Your Campus?

    ERIC Educational Resources Information Center

    McCord, Alan

    2002-01-01

    Explores why the idea of outsourcing campus information technology (IT) services rouses opinions and passions best handled by informed dialogue. Discusses how to conduct this dialog, including common myths about outsourcing and useful lessons. (EV)

  3. Elements of strategic capability for software outsourcing enterprises based on the resource

    NASA Astrophysics Data System (ADS)

    Shi, Wengeng

    2011-10-01

    Software outsourcing enterprises as an emerging high-tech enterprises, the rise of the speed and the number was very amazing. In addition to Chinese software outsourcing for giving preferential policies, the software outsourcing business has its ability to upgrade, and in general the software companies have not had the related characteristics. View from the resource base of the theory, the analysis software outsourcing companies have the ability and resources of rare and valuable and non-mimic, we try to give an initial framework for theoretical analysis based on this.

  4. A secure data outsourcing scheme based on Asmuth-Bloom secret sharing

    NASA Astrophysics Data System (ADS)

    Idris Muhammad, Yusuf; Kaiiali, Mustafa; Habbal, Adib; Wazan, A. S.; Sani Ilyasu, Auwal

    2016-11-01

    Data outsourcing is an emerging paradigm for data management in which a database is provided as a service by third-party service providers. One of the major benefits of offering database as a service is to provide organisations, which are unable to purchase expensive hardware and software to host their databases, with efficient data storage accessible online at a cheap rate. Despite that, several issues of data confidentiality, integrity, availability and efficient indexing of users' queries at the server side have to be addressed in the data outsourcing paradigm. Service providers have to guarantee that their clients' data are secured against internal (insider) and external attacks. This paper briefly analyses the existing indexing schemes in data outsourcing and highlights their advantages and disadvantages. Then, this paper proposes a secure data outsourcing scheme based on Asmuth-Bloom secret sharing which tries to address the issues in data outsourcing such as data confidentiality, availability and order preservation for efficient indexing.

  5. Outsourcing, Managing, Supervising, and Regulating Private Military Companies in Contingency Operations

    DTIC Science & Technology

    2010-09-01

    the Rise of Privatized Military Industry, 88–100. 18 Steven Brayton , "Outsourcing War: Mercenaries and the Privatization of Peacekeeping,” Journal of...220. 50 Isenberg, Shadow Force: Private Security Contractors in Iraq, 1. 51 Brayton , "Outsourcing War: Mercenaries and the Privatization of...Review of Books, April 3, 2008, 29. 71 Singer, Corporate Warriors, The Rise of the Privatized Military Industry, 113. 72 Brayton , "Outsourcing War

  6. 77 FR 72778 - Airworthiness Directives; Cessna Aircraft Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-06

    ... following: (1) Inspect the number of hours on the A/C compressor hour meter; and (2) Check the aircraft... following Cessna Aircraft Company Model 525 Maintenance Manual, Revision 23, dated July 1, 2012. (1) Before...-0880; Directorate Identifier 2012-CE-004-AD] RIN 2120-AA64 Airworthiness Directives; Cessna Aircraft...

  7. [Basic considerations during outsourcing of clinical data management services].

    PubMed

    Shen, Tong; Liu, Yan

    2015-11-01

    With worldwide improvements in the regulations of international and domestic clinical trial conductions, the quality of clinical trials and trial data management are receiving a great deal of attention. To ensure the quality of clinical trials, maintain business flexibilities and effectively utilize internal and external resources, the outsourcing model is used in the management of clinical data in operation of pharmaceutical companies. The essential criteria of a successful outsourcing mode in clinical trial are selection of qualified contract research organizations (CRO); establishment of appropriate outsourcing model, and generation of effective quality control systems to ensure the authenticity, integrity and accuracy of the clinical trial data.

  8. HB 1347 and Its Relationship to Foodservice Outsourcing in Illinois Public Schools

    ERIC Educational Resources Information Center

    Brashear, Gary L.

    2012-01-01

    This study examined foodservice outsourcing in the State of Illinois. School administrators currently outsourcing foodservice were surveyed about their perceptions of HB1347 and its components. This study looked at HB1347 in Illinois, and its effects on outsourcing in school districts. Data for this study was collected from a survey sent to 100%…

  9. "Outsourced": Using a Comedy Film to Teach Intercultural Communication

    ERIC Educational Resources Information Center

    Briam, Carol

    2010-01-01

    Given that feature films can enhance the teaching of intercultural communication, this article describes in detail how the 2006 comedy film, "Outsourced," can be integrated into a course. The article relates the film to four different functions of film and shows how "Outsourced" can help create an intercultural experience for…

  10. Outsourcing of Technology in Higher Education: The Brookdale Experience.

    ERIC Educational Resources Information Center

    Thompson, Donna; Morgovsky, Joel

    Outsourcing in higher education refers to the practice of contracting with private, off-campus firms to provide or manage services which have historically been provided in-house. Budget cutbacks and declining private support have led to increased use of outsourcing for non-mission-critical and non-instructional services, such as information…

  11. New, strategic outsourcing models to meet changing clinical development needs.

    PubMed

    Jones, Janet; Minor, Michael

    2010-04-01

    The impact of increasing clinical costs and the need for more data to support higher efficacy demands and overcome regulatory hurdles for market entry means that every Company is faced with the challenge of how to do more with a smaller budget. As budgets get squeezed the pharmaceutical Industry has been looking at how to contain or reduce cost and support an increased number of projects. With the growing sophistication of outsourcing, this is an increasingly important area of focus. Some Pharmaceutical Companies have moved from tactical, case by case, outsourcing to new, more strategic relationships, which involve outsourcing functions that were historically held as core pharmaceutical functions. An increasing number of Sponsors are looking at strategic relationships which are based on more creative outsourcing approaches. As the need and sophistication of these outsourcing models and the sponsors / CROs involved in them, these approaches are becoming more transformational and need to be based on a strong partnership. Lessons learned from working with sponsors in a partnership model have been examined and two key challenges addressed in detail: the need for bilateral central control though a strong governance model and the importance of early planning and commitment.

  12. New, Strategic Outsourcing Models to Meet Changing Clinical Development Needs

    PubMed Central

    Jones, Janet; Minor, Michael

    2010-01-01

    The impact of increasing clinical costs and the need for more data to support higher efficacy demands and overcome regulatory hurdles for market entry means that every Company is faced with the challenge of how to do more with a smaller budget. As budgets get squeezed the pharmaceutical Industry has been looking at how to contain or reduce cost and support an increased number of projects. With the growing sophistication of outsourcing, this is an increasingly important area of focus. Some Pharmaceutical Companies have moved from tactical, case by case, outsourcing to new, more strategic relationships, which involve outsourcing functions that were historically held as core pharmaceutical functions. An increasing number of Sponsors are looking at strategic relationships which are based on more creative outsourcing approaches. As the need and sophistication of these outsourcing models and the sponsors / CROs involved in them, these approaches are becoming more transformational and need to be based on a strong partnership. Lessons learned from working with sponsors in a partnership model have been examined and two key challenges addressed in detail: the need for bilateral central control though a strong governance model and the importance of early planning and commitment. PMID:21829788

  13. General aviation avionics equipment maintenance

    NASA Technical Reports Server (NTRS)

    Parker, C. D.; Tommerdahl, J. B.

    1978-01-01

    Maintenance of general aviation avionics equipment was investigated with emphasis on single engine and light twin engine general aviation aircraft. Factors considered include the regulatory agencies, avionics manufacturers, avionics repair stations, the statistical character of the general aviation community, and owners and operators. The maintenance, environment, and performance, repair costs, and reliability of avionics were defined. It is concluded that a significant economic stratification is reflected in the maintenance problems encountered, that careful attention to installations and use practices can have a very positive impact on maintenance problems, and that new technologies and a general growth in general aviation will impact maintenance.

  14. Metabolic Syndrome and Cardio-Cerebrovascular Risk Disparities Between Pilots and Aircraft Mechanics.

    PubMed

    Kim, Myeong-Bo; Kim, Hyun-Jin; Kim, Soo-Hyeon; Lee, Suk-Ho; Lee, Se-Ho; Park, Won-Ju

    2017-09-01

    In the Republic of Korea Air Force, the health of pilots is strictly supervised, but there is comparatively not enough interest in aircraft mechanics' health. Among mechanics, who are heavily involved in military aircraft maintenance, the occurrence of sudden cardio-cerebrovascular diseases (CCVDs) is a possible risk factor during the maintenance process, which should be performed perfectly. We performed health examinations on 2123 male aircraft pilots and 1271 aircraft mechanics over 30 yr of age and determined the prevalence of metabolic syndrome (MetS), an important risk factor for CCVDs. The prevalence of MetS in the aircraft mechanics (21.3%) was significantly higher than in the pilots (12.6%), and the gap in prevalence tended to grow as age increased. Among aircraft mechanics in their 30s and 40s, the prevalence of MetS was lower than in the general population. However, the prevalence of MetS among aircraft mechanics in their 50s (36.0%) was similar to that in the general population (35.7%). Systematic health management is needed for aircraft mechanics for aviation safety and for the maintenance of military strength via the prevention of CCVDs.Kim M-B, Kim H-J, Kim S-H, Lee S-H, Lee S-H, Park W-J. Metabolic syndrome and cardio-cerebrovascular risk disparities between pilots and aircraft mechanics. Aerosp Med Hum Perform. 2017; 88(9):866-870.

  15. Outsourcing in Higher Education: A Business Officer and Business Partner Discuss a Controversial Management Strategy.

    ERIC Educational Resources Information Center

    Bartem, Richard; Manning, Sherry

    2001-01-01

    With outsourcing, colleges can focus on their primary mission rather than on managing an auxiliary service that may compete with private sector alternatives. Discusses when an institution should outsource; what businesses can bring to educational communities; the role of business officers in outsourcing; how to ensure successful outsourcing; why…

  16. PERFORMANCE-BASED CONTRACTING IN CONSTRUCTION PHASE AND MAINTENANCE PHASE OF PAVEMENT

    NASA Astrophysics Data System (ADS)

    Yoshida, Takeshi

    Performance-based contracting for pavement in Japan started as performance warranties in construction phase, in 1999. Recently, road agencies have recognized the applicability of this type of contracting in outsourcing of maintenance activities. The objectives of this study are to clarify the issues of performance specifying in construction phase and maintenance phase of pavement, and to propose measures to be taken. This paper, with the recognition that the life of each pavement depends on performance standards for various attributes, reviews domestic and foreign examples of performance-based contracting. A performance standard based on the average of current practices can enhance product quality and service life with a warranty contract. Repair thresholds and response time for each deficiency should be considered as performance standards in maintenance phase.

  17. Exploring information systems outsourcing in U.S. hospital-based health care delivery systems.

    PubMed

    Diana, Mark L

    2009-12-01

    The purpose of this study is to explore the factors associated with outsourcing of information systems (IS) in hospital-based health care delivery systems, and to determine if there is a difference in IS outsourcing activity based on the strategic value of the outsourced functions. IS sourcing behavior is conceptualized as a case of vertical integration. A synthesis of strategic management theory (SMT) and transaction cost economics (TCE) serves as the theoretical framework. The sample consists of 1,365 hospital-based health care delivery systems that own 3,452 hospitals operating in 2004. The findings indicate that neither TCE nor SMT predicted outsourcing better than the other did. The findings also suggest that health care delivery system managers may not be considering significant factors when making sourcing decisions, including the relative strategic value of the functions they are outsourcing. It is consistent with previous literature to suggest that the high cost of IS may be the main factor driving the outsourcing decision.

  18. On the application of copula in modeling maintenance contract

    NASA Astrophysics Data System (ADS)

    Iskandar, B. P.; Husniah, H.

    2016-02-01

    This paper deals with the application of copula in maintenance contracts for a nonrepayable item. Failures of the item are modeled using a two dimensional approach where age and usage of the item and this requires a bi-variate distribution to modelling failures. When the item fails then corrective maintenance (CM) is minimally repaired. CM can be outsourced to an external agent or done in house. The decision problem for the owner is to find the maximum total profit whilst for the agent is to determine the optimal price of the contract. We obtain the mathematical models of the decision problems for the owner as well as the agent using a Nash game theory formulation.

  19. Governance of Offshore IT Outsourcing at Shell Global Functions IT-BAM Development and Application of a Governance Framework to Improve Outsourcing Relationships

    NASA Astrophysics Data System (ADS)

    de Jong, Floor; van Hillegersberg, Jos; van Eck, Pascal; van der Kolk, Feiko; Jorissen, Rene

    The lack of effective IT governance is widely recognized as a key inhibitor to successful global IT outsourcing relationships. In this study we present the development and application of a governance framework to improve outsourcing relationships. The approach used to developing an IT governance framework includes a meta model and a customization process to fit the framework to the target organization. The IT governance framework consists of four different elements (1) organisational structures, (2) joint processes between in- and outsourcer, (3) responsibilities that link roles to processes and (4) a diverse set of control indicators to measure the success of the relationship. The IT governance framework is put in practice in Shell GFIT BAM, a part of Shell that concluded to have a lack of management control over at least one of their outsourcing relationships. In a workshop the governance framework was used to perform a gap analysis between the current and desired governance. Several gaps were identified in the way roles and responsibilities are assigned and joint processes are set-up. Moreover, this workshop also showed the usefulness and usability of the IT governance framework in structuring, providing input and managing stakeholders in the discussions around IT governance.

  20. Evaluation of outsourcing in nursing services: a case study of kashani hospital, isfahan in 2011.

    PubMed

    Ferdosi, Masoud; Farahabadi, Ehsan; Mofid, Maryam; Rejalian, Farzaneh; Haghighat, Maryam; Naghdi, Parnaz

    2013-03-01

    Hospitals need to focus on their core activities, thus outsourcing of services may be effective in some instances. However, monitoring and supervision is a vital mechanism to preserving and enhancing the quality of outsourced services, and to identify the benefits and losses occurred. The purpose of this study is evaluation of nursing services outsourced in a general hospital from different point of views. This is a descriptive and applied study done by case study (before and after) method. Outsourcing nursing services of clinical wards (ENT and Neurosurgery) of Kashani Hospital in 2011 has been studied. We extracted data from a handmade questionnaire about internal customer's satisfaction and semi-structured interviews with officials, and also survey of financial and administrative documents and records related to the topic. The findings indicate an increased number of graduated nurses per bed to fulfill the main objective of outsourcing in this case. But achieving this objective is accompanied with remarkable increased costs per bed after outsourcing. Besides, we noticed minor changes in internal customer satisfaction rate. While outsourcing should bring about staff and patients' satisfaction and increase the efficiency and effectiveness, outsourcing nursing workforce singly, leaded to a loss of efficiency. Therefore, the applied outsourcing has not met the productivity for the hospital.

  1. Evaluation of Outsourcing in Nursing Services: A Case Study of Kashani Hospital, Isfahan in 2011

    PubMed Central

    Ferdosi, Masoud; Farahabadi, Ehsan; Mofid, Maryam; Rejalian, Farzaneh; Haghighat, Maryam; Naghdi, Parnaz

    2013-01-01

    Background: Hospitals need to focus on their core activities, thus outsourcing of services may be effective in some instances. However, monitoring and supervision is a vital mechanism to preserving and enhancing the quality of outsourced services, and to identify the benefits and losses occurred. The purpose of this study is evaluation of nursing services outsourced in a general hospital from different point of views. Methods: This is a descriptive and applied study done by case study (before and after) method. Outsourcing nursing services of clinical wards (ENT and Neurosurgery) of Kashani Hospital in 2011 has been studied. We extracted data from a handmade questionnaire about internal customer’s satisfaction and semi-structured interviews with officials, and also survey of financial and administrative documents and records related to the topic. Results: The findings indicate an increased number of graduated nurses per bed to fulfill the main objective of outsourcing in this case. But achieving this objective is accompanied with remarkable increased costs per bed after outsourcing. Besides, we noticed minor changes in internal customer satisfaction rate. Conclusion: While outsourcing should bring about staff and patients’ satisfaction and increase the efficiency and effectiveness, outsourcing nursing workforce singly, leaded to a loss of efficiency. Therefore, the applied outsourcing has not met the productivity for the hospital. PMID:23678338

  2. 78 FR 72897 - Draft Guidance for Industry on Interim Product Reporting for Human Drug Compounding Outsourcing...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-04

    ...] Draft Guidance for Industry on Interim Product Reporting for Human Drug Compounding Outsourcing... Compounding Outsourcing Facilities Under Section 503B of the Federal Food, Drug, and Cosmetic Act.'' The draft... human drug compounders that choose to register as outsourcing facilities (outsourcing facilities). DATES...

  3. 14 CFR 125.247 - Inspection programs and maintenance.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... CAPACITY OF 6,000 POUNDS OR MORE; AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance § 125.247 Inspection programs and maintenance. (a) No person may operate an airplane subject to this part unless (1... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Inspection programs and maintenance. 125...

  4. 14 CFR 125.247 - Inspection programs and maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... CAPACITY OF 6,000 POUNDS OR MORE; AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance § 125.247 Inspection programs and maintenance. (a) No person may operate an airplane subject to this part unless (1... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Inspection programs and maintenance. 125...

  5. 14 CFR 125.247 - Inspection programs and maintenance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... CAPACITY OF 6,000 POUNDS OR MORE; AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance § 125.247 Inspection programs and maintenance. (a) No person may operate an airplane subject to this part unless (1... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Inspection programs and maintenance. 125...

  6. 14 CFR 125.247 - Inspection programs and maintenance.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... CAPACITY OF 6,000 POUNDS OR MORE; AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance § 125.247 Inspection programs and maintenance. (a) No person may operate an airplane subject to this part unless (1... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Inspection programs and maintenance. 125...

  7. 14 CFR 125.247 - Inspection programs and maintenance.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... CAPACITY OF 6,000 POUNDS OR MORE; AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Maintenance § 125.247 Inspection programs and maintenance. (a) No person may operate an airplane subject to this part unless (1... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Inspection programs and maintenance. 125...

  8. Outsourcing: A Flexible Option for the Future? IES Report 320.

    ERIC Educational Resources Information Center

    Reilly, Peter; Tamkin, Penny

    The nature, extent, and likely future of outsourcing in the United Kingdom was examined through an extensive literature review and interviews with small numbers of local authorities, companies, and contractors. Despite the limited data available, it appeared that outsourcing is concentrated in ancillary activities and is relatively marginal, both…

  9. Privatizing Student Services and University Functions: An Overview of Outsourcing Issues.

    ERIC Educational Resources Information Center

    Keiser, Robert W.

    2002-01-01

    Explores why more and more institutions are outsourcing different functions in the college union, including food services, vending, and bookstores. Examines the advantages and disadvantages, and what college union administrators should watch for when considering outsourcing. (EV)

  10. Composite components on commercial aircraft

    NASA Technical Reports Server (NTRS)

    Dexter, H. B.

    1980-01-01

    Commercial aircraft manufacturers are making production commitments to composite structure for future aircraft and modifications to current production aircraft. Flight service programs with advanced composites sponsored by NASA during the past 10 years are described. Approximately 2.5 million total composite component flight hours have been accumulated since 1970 on both commercial transports and helicopters. Design concepts with significant mass savings were developed, appropriate inspection and maintenance procedures were established, and satisfactory service was achieved for the various composite components. A major NASA/U.S. industry technology program to reduce fuel consumption of commercial transport aircraft through the use of advanced composites was undertaken. Ground and flight environmental effects on the composite materials used in the flight service programs supplement the flight service evaluation.

  11. 14 CFR 21.445 - Maintenance of eligibility.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Maintenance of eligibility. 21.445 Section 21.445 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT... Maintenance of eligibility. The DAS shall continue to meet the requirements for issue of the authorization or...

  12. 14 CFR 21.445 - Maintenance of eligibility.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Maintenance of eligibility. 21.445 Section 21.445 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT... Maintenance of eligibility. The DAS shall continue to meet the requirements for issue of the authorization or...

  13. WEST ELEVATION OF USAIR MAINTENANCE HANGAR AT GREATER BUFFALO INTERNATIONAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    WEST ELEVATION OF USAIR MAINTENANCE HANGAR AT GREATER BUFFALO INTERNATIONAL AIRPORT. A BOEING 737-200 HAS BEEN TOWED IN FOR AN OVERNIGHT (BALANCE) CHECK. THE TAIL DOCK STANDS ARE IN POSITION AT THE REAR OF THE AIRCRAFT TO FACILITATE INSPECTION. MAINTENANCE CREWS PERFORM NIGHTLY SERVICE ON UP TO 6 AIRCRAFT. THE NORMAL SEQUENCE OF 12 ROUTINE CHECKS COVERS SEVEN BASIC AREAS: INTERIOR, EXTERIOR, WINGS, LANDING GEAR, TAIL, AUXILIARY POWER UNIT (APU), AND ENGINES. THE WORK FORCE CONSISTS OF 5 INSPECTORS, 3 LEAD MECHANICS, AND 24 MECHANICS; NIGHTLY SCHEDULES ARE COORDINATED BY A PLANNER. - Greater Buffalo International Airport, Maintenance Hangar, Buffalo, Erie County, NY

  14. Identification of multi-criteria for supplier selection in IT project outsourcing

    NASA Astrophysics Data System (ADS)

    Fusiripong, Prashaya; Baharom, Fauziah; Yusof, Yuhanis

    2017-10-01

    In the increasing global business competitiveness, most organizations have attempted to determine the suitable external parties to support their core and non-core competency, particularly, in IT project outsourcing. The IT supplier selection is required to apply multi-criteria which comprised tangible criteria and intangible criteria in consider optimal IT supplier. Most researches attempted to identify optimal criteria for selecting IT supplier, however, the criteria cannot be the considered common criteria support the variety of IT outsourcing. Therefore, the study aimed to identify a common set of criteria being used in the various types of IT outsourcing. The common criteria are constructed by multi-criteria and success criteria, which were collected by literature review with comprehensive and comparative approach. Consequently, the researchers are able to identify a common set of criteria adopted in the variety of selection problem IT outsourcing supplier.

  15. Examining the Relationships between Outsourcing and Downsizing to Mishap Rates at NASA (FYs 1985-2011)

    NASA Astrophysics Data System (ADS)

    Charles, Sterlin Neil

    Outsourcing and downsizing practices within American businesses have been topics of investigation over the past four decades. With the intention of saving diminishing resources, many North American aerospace and governmental organizations have embraced both practices. During the 1990s the National Aeronautics and Space Administration (NASA) increased contractor outsourcing and reduced the civil servant population in response to mandated federal budget cuts. Major human capital adjustments were made within NASA as management elected to place the shuttle's operations under a single contract. The problem addressed is increased outsourcing and downsizing has been associated with reduced safety outcomes. The purpose of this quantitative archival study was to examine the relationships of outsourcing and downsizing to mishaps rates at NASA between fiscal year (FY) 1985 and FY 2011. Twenty-seven samples of outsourcing and downsizing data were examined to determine the relationships with high-severity mishaps (HSMs), moderate-severity mishaps (MSMs), and low-severity mishaps (LSMs). A quantitative design utilizing weighted least squares (WLS) regression analysis measured the relationships between predictor and outcome variables. Neither outsourcing nor downsizing predicted HSM rates, adjusted R2 = .32, F (3, 23) = 5.01, p = .53 (outsourcing); adjusted R2 = .49, F (3, 23) = 9.34, p = .41 (downsizing). Both outsourcing and downsizing predicted MSM rates, adjusted R2 = .21, F (3, 23) = 3.24, p = .006 (outsourcing); adjusted R2 = .49, F (3, 23) = 9.55, p = <.001 (downsizing); and LSM rates, adjusted R2 = .77, F (3, 23) = 30.61, p = .003 (outsourcing); adjusted R2 = .89, F (3, 23) = 68.99, p = <.001 (downsizing). Future research could focus more on the causes of mishaps; mishaps unrelated to human factors issues could be eliminated from the analysis. Further research could involve a larger sample size (as the years pass), alternate sources of data for outsourcing and downsizing

  16. Differences in the use of outsourcing in public and private institutions providing medical services.

    PubMed

    Czerw, Aleksandra I; Kowalska, Mariola; Religioni, Urszula

    2014-06-29

    The costs of health care in Poland are continuously increasing. Thus, almost every institution providing medical services aims at their limitation. One of the costs rationalisation methods in the health care sector is outsourcing. The study was conducted in 153 randomly selected institutions providing medical activities. The tool was a questionnaire, available via a web browser. Over 30% of public institutions identified the need for financial savings, as the main reason for outsourcing the cleaning function. Among private institutions, the dominant reason for this is too high maintenance cost of the cleaning staff (less than 40% of responses). The huge number of medical institutions use the services of an external company for laundering. Over 30% of public institutions identified as the most common reason for separation of functions laundering lack of resources to upgrade and modernize facilities. Less than 27% of public institutions indicate too high costs of kitchen staff as the main reason for ordering function of feeding. Another reason is the need for financial savings (22% response rate). Some institutions indicate a desire to focus on key areas (20% of responses) and lack of financial resources to upgrade and modernize the kitchen (20% response rate). Public and private institutions exercise control over the quality and method performed by an external service (71% of public institutions and 59% of private institutions). Private institutions often informally exercise external control (difference confirmed - Fisher's exact test). Less than 90% of public institutions indicated satisfaction with the services provided by external companies. The adaptation of outsourcing in medical facilities leads to financial efficiency improvement. Through the separation of some medical functions and entrusting their realisation to external companies, medical institutions can focus on their basic activity that is the provision of health services.

  17. Differences in the use of outsourcing in public and private institutions providing medical services

    PubMed Central

    Kowalska, Mariola; Religioni, Urszula

    2014-01-01

    Introduction The costs of health care in Poland are continuously increasing. Thus, almost every institution providing medical services aims at their limitation. One of the costs rationalisation methods in the health care sector is outsourcing. Material and methods The study was conducted in 153 randomly selected institutions providing medical activities. The tool was a questionnaire, available via a web browser. Results Over 30% of public institutions identified the need for financial savings, as the main reason for outsourcing the cleaning function. Among private institutions, the dominant reason for this is too high maintenance cost of the cleaning staff (less than 40% of responses). The huge number of medical institutions use the services of an external company for laundering. Over 30% of public institutions identified as the most common reason for separation of functions laundering lack of resources to upgrade and modernize facilities. Less than 27% of public institutions indicate too high costs of kitchen staff as the main reason for ordering function of feeding. Another reason is the need for financial savings (22% response rate). Some institutions indicate a desire to focus on key areas (20% of responses) and lack of financial resources to upgrade and modernize the kitchen (20% response rate). Public and private institutions exercise control over the quality and method performed by an external service (71% of public institutions and 59% of private institutions). Private institutions often informally exercise external control (difference confirmed – Fisher's exact test). Less than 90% of public institutions indicated satisfaction with the services provided by external companies. Conclusions The adaptation of outsourcing in medical facilities leads to financial efficiency improvement. Through the separation of some medical functions and entrusting their realisation to external companies, medical institutions can focus on their basic activity that is the

  18. Lessons for outsourcing and interim management relationships.

    PubMed

    Macko, W; Kostyack, P T

    1999-01-01

    Few decisions can affect an organization more than the selection of an outsourcing or interim management partner. More and more health care organizations face such decisions in today's competitive market in order to face new business needs. Making these relationships successful can be important for health care organizations seeking competitive advantages or seeking immediately accessible management support. These relationships, however, require careful partner selection and development. Success in outsourcing and interim management relationships is contingent upon a thorough selection process, a strong contract that has clearly and explicitly detailed responsibilities and a culture-sensitive business rapport between the client and selected partner.

  19. Outsourcing of Corporate Information Services: Implications for Redesigning Corporate Library Services.

    ERIC Educational Resources Information Center

    Agada, John

    1996-01-01

    Examines the trend in outsourcing information services and suggests it threatens the survival of corporate libraries. Topics include changes in the competitive corporate environment; characteristics of outsourceable services; managing change; redesigning the corporate librarian's role; and implications for redesigning corporate information…

  20. Coast Guard Aircraft: Transfer of Fixed-Wing C-27J Aircraft Is Complex and Further Fleet Purchases Should Coincide with Study Results

    DTIC Science & Technology

    2015-03-01

    C-27J to the Coast Guard. This report assesses (1) the status of the transfer and risks the Coast Guard faces in fielding the transferred aircraft...had transferred 2 of the 14 C-27J aircraft it is receiving from the Air Force to its aircraft maintenance facility, with plans to field 14 fully...Coast Guard continues to receive these aircraft in the near term, the capability and cost of the Coast Guard’s fixed-wing fleet runs the risk of being

  1. 40 CFR 141.804 - Aircraft water system operations and maintenance plan.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... must include the following requirements for procedures for disinfection and flushing of aircraft water system. (i) The air carrier must conduct disinfection and flushing of the aircraft water system in... water procedures; (ii) Sample collection procedures; (iii) Disinfection and flushing procedures; (iv...

  2. Two-Cloud-Servers-Assisted Secure Outsourcing Multiparty Computation

    PubMed Central

    Wen, Qiaoyan; Zhang, Hua; Jin, Zhengping; Li, Wenmin

    2014-01-01

    We focus on how to securely outsource computation task to the cloud and propose a secure outsourcing multiparty computation protocol on lattice-based encrypted data in two-cloud-servers scenario. Our main idea is to transform the outsourced data respectively encrypted by different users' public keys to the ones that are encrypted by the same two private keys of the two assisted servers so that it is feasible to operate on the transformed ciphertexts to compute an encrypted result following the function to be computed. In order to keep the privacy of the result, the two servers cooperatively produce a custom-made result for each user that is authorized to get the result so that all authorized users can recover the desired result while other unauthorized ones including the two servers cannot. Compared with previous research, our protocol is completely noninteractive between any users, and both of the computation and the communication complexities of each user in our solution are independent of the computing function. PMID:24982949

  3. Two-cloud-servers-assisted secure outsourcing multiparty computation.

    PubMed

    Sun, Yi; Wen, Qiaoyan; Zhang, Yudong; Zhang, Hua; Jin, Zhengping; Li, Wenmin

    2014-01-01

    We focus on how to securely outsource computation task to the cloud and propose a secure outsourcing multiparty computation protocol on lattice-based encrypted data in two-cloud-servers scenario. Our main idea is to transform the outsourced data respectively encrypted by different users' public keys to the ones that are encrypted by the same two private keys of the two assisted servers so that it is feasible to operate on the transformed ciphertexts to compute an encrypted result following the function to be computed. In order to keep the privacy of the result, the two servers cooperatively produce a custom-made result for each user that is authorized to get the result so that all authorized users can recover the desired result while other unauthorized ones including the two servers cannot. Compared with previous research, our protocol is completely noninteractive between any users, and both of the computation and the communication complexities of each user in our solution are independent of the computing function.

  4. An Online Approach to Teaching International Outsourcing in Technical Communication Classes

    ERIC Educational Resources Information Center

    St. Amant, Kirk

    2005-01-01

    The growth of international online access has given rise to a new production method--international outsourcing--that has important implications for technical communication practices. Successful interactions within international outsourcing require individuals to understand how cultural factors could affect online interactions. Today's technical…

  5. Outsourcing: two case studies from the Victorian public hospital sector.

    PubMed

    Young, Suzanne

    2007-02-01

    Outsourcing was one process of privatisation used in the Victorian public health sector in the 1990s. However it was used to varying degrees and across a variety of different services. This paper attempts to answer the questions: Why have managers outsourced? What have managers considered when they have decided to outsource? The research was carried out in a rural hospital and a metropolitan network in Victoria. The key findings highlight the factors that decision makers considered to be important and those that led to negative outcomes. Economic factors, such as frequency of exchange, length of relationships between the parties, and information availability, were often ignored. However, other factors such as outcome measurability, technology, risk, labour market characteristics and goal conflict, and political factors such as relative power of management over labour were often perceived as important in the decision-making process. Negative outcomes from outsourcing were due to the short length of relationships and accompanying difficulties with trust, commitment and loyalty; poor quality; and excessive monitoring and the measurement of outcomes.

  6. Scorpion: Close Air Support (CAS) aircraft

    NASA Technical Reports Server (NTRS)

    Allen, Chris; Cheng, Rendy; Koehler, Grant; Lyon, Sean; Paguio, Cecilia

    1991-01-01

    The objective is to outline the results of the preliminary design of the Scorpion, a proposed close air support aircraft. The results obtained include complete preliminary analysis of the aircraft in the areas of aerodynamics, structures, avionics and electronics, stability and control, weight and balance, propulsion systems, and costs. A conventional wing, twin jet, twin-tail aircraft was chosen to maximize the desirable characteristics. The Scorpion will feature low speed maneuverability, high survivability, low cost, and low maintenance. The life cycle cost per aircraft will be 17.5 million dollars. The maximum takeoff weight will be 52,760 pounds. Wing loading will be 90 psf. The thrust to weight will be 0.6 lbs/lb. This aircraft meets the specified mission requirements. Some modifications have been suggested to further optimize the design.

  7. 78 FR 72899 - Draft Guidance for Industry on Registration for Human Drug Compounding Outsourcing Facilities...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-04

    ... facilities. The draft guidance discusses the process for registration of outsourcing facilities. The draft... outsourcing facilities that will participate in the process. Estimated reporting burden until September 30...] Draft Guidance for Industry on Registration for Human Drug Compounding Outsourcing Facilities Under...

  8. Outsourcing Turns IT Leaders into the New Air Traffic Controllers

    ERIC Educational Resources Information Center

    Raths, David

    2010-01-01

    Many chief information officers (CIOs) have come to accept and even embrace the role of outsourcers in their portfolio of IT services. In 2009, 47 percent of the 352 CIOs surveyed by the Center for Higher Education Chief Information Officer Studies (CHECS) said they had selectively outsourced some part of the IT function, up from 43 percent the…

  9. Outsourcing of Academic Clinical Laboratories

    PubMed Central

    Mrak, Robert E.; Parslow, Tristram G.; Tomaszewski, John E.

    2018-01-01

    American hospitals are increasingly turning to service outsourcing to reduce costs, including laboratory services. Studies of this practice have largely focused on nonacademic medical centers. In contrast, academic medical centers have unique practice environments and unique mission considerations. We sought to elucidate and analyze clinical laboratory outsourcing experiences in US academic medical centers. Seventeen chairs of pathology with relevant experience were willing to participate in in-depth interviews about their experiences. Anticipated financial benefits from joint venture arrangements often eroded after the initial years of the agreement, due to increased test pricing, management fees, duplication of services in support of inpatients, and lack of incentive for utilization control on the part of the for-profit partner. Outsourcing can preclude development of lucrative outreach programs; such programs were successfully launched in several cases after joint ventures were either avoided or terminated. Common complaints included poor test turnaround time and problems with test quality (especially in molecular pathology, microbiology, and flow cytometry), leading to clinician dissatisfaction. Joint ventures adversely affected retention of academically oriented clinical pathology faculty, with adverse effects on research and education, which further exacerbated clinician dissatisfaction due to lack of available consultative expertise. Resident education in pathology and in other disciplines (especially infectious disease) suffered both from lack of on-site laboratory capabilities and from lack of teaching faculty. Most joint ventures were initiated with little or no input from pathology leadership, and input from pathology leadership was seen to have been critical in those cases where such arrangements were declined or terminated. PMID:29637086

  10. Problems with aging wiring in Naval aircraft

    NASA Technical Reports Server (NTRS)

    Campbell, Frank J.

    1994-01-01

    The Navy is experiencing a severe aircraft electrical wiring maintenance problem as a result of the extensive use of an aromatic polyimide insulation that is deteriorating at a rate that was unexpected when this wire was initially selected. This problem has significantly affected readiness, reliability, and safety and has greatly increased the cost of ownership of Naval aircraft. Failures in wire harnesses have exhibited arcing and burning that will propagate drastically, to the interruption of many electrical circuits from a fault initiated by the failure of deteriorating wires. There is an urgent need for a capability to schedule aircraft rewiring in an orderly manner with a logically derived determination of which aircraft have aged to the point of absolute necessity. Excessive maintenance was demonstrated to result from the accelerated aging due to the parameters of moisture, temperature, and strain that exist in the Naval Aircraft environment. Laboratory studies have demonstrated that MIL-W-81381 wire insulation when aged at high humidities followed the classical Arrhenius thermal aging relationship. In an extension of the project a multifactor formula was developed that is now capable of predicting life under varying conditions of these service parameters. An automated test system has also been developed to analyze the degree of deterioration that has occurred in wires taken from an aircraft in order to obtain an assessment of remaining life. Since it is both physically and financially impossible to replace the wiring in all the Navy's aircraft at once, this system will permit expedient scheduling so that those aircraft that are most probable to have wiring failure problems can be overhauled first.

  11. Turboprop aircraft against terrorism: a SWOT analysis of turboprop aircraft in CAS operations

    NASA Astrophysics Data System (ADS)

    Yavuz, Murat; Akkas, Ali; Aslan, Yavuz

    2012-06-01

    Today, the threat perception is changing. Not only for countries but also for defence organisations like NATO, new threat perception is pointing terrorism. Many countries' air forces become responsible of fighting against terorism or Counter-Insurgency (COIN) Operations. Different from conventional warfare, alternative weapon or weapon systems are required for such operatioins. In counter-terrorism operations modern fighter jets are used as well as helicopters, subsonic jets, Unmanned Aircraft Systems (UAS), turboprop aircraft, baloons and similar platforms. Succes and efficiency of the use of these platforms can be determined by evaluating the conditions, the threats and the area together. Obviously, each platform has advantages and disadvantages for different cases. In this research, examples of turboprop aircraft usage against terrorism and with a more general approach, turboprop aircraft for Close Air Support (CAS) missions from all around the world are reviewed. In this effort, a closer look is taken at the countries using turboprop aircraft in CAS missions while observing the fields these aircraft are used in, type of operations, specifications of the aircraft, cost and the maintenance factors. Thus, an idea about the convenience of using these aircraft in such operations can be obtained. A SWOT analysis of turboprop aircraft in CAS operations is performed. This study shows that turboprop aircraft are suitable to be used in counter-terrorism and COIN operations in low threat environment and is cost benefical compared to jets.

  12. Perspectives on U.S. Competitiveness in Science and Technology

    DTIC Science & Technology

    2007-01-01

    nation is unlikely to receive some sudden “ wakeup ” call; rather, the problem is one that is likely to evidence itself gradually over a surprisingly...health care than on steel.3 US scheduled airlines currently outsource portions of their aircraft maintenance to China and El Salvador.4 IBM recently sold... schedules based on “duties classification.” This approach reflected the “scientific” management period by formalizing the “rank in position” principle of

  13. Perspectives on U.S. Competitiveness in Science and Technology: Conference Proceedings

    DTIC Science & Technology

    2006-11-01

    that the nation is unlikely to receive some sudden “ wakeup ” call; rather, the problem is one that is likely to evidence itself gradually over a...on health care than on steel.3 US scheduled airlines currently outsource portions of their aircraft maintenance to China and El Salvador.4 IBM... schedules based on “duties classification.” This approach reflected the “scientific” management period by formalizing the “rank in position

  14. 78 FR 17865 - Airworthiness Directives; PILATUS AIRCRAFT LTD. Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-25

    ... TBO were moved from Chapter 5: Time Limits/Maintenance Checks, to Chapter 4: Structural, Component and... Directives; PILATUS AIRCRAFT LTD. Airplanes AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final... all PILATUS AIRCRAFT LTD. Models PC-12, PC-12/45, and PC-12/47 airplanes. This AD results from...

  15. Guidelines for Outsourcing Remote Access.

    ERIC Educational Resources Information Center

    Hassler, Ardoth; Neuman, Michael

    1996-01-01

    Discusses the advantages and disadvantages of outsourcing remote access to campus computer networks and the Internet, focusing on improved service, cost-sharing, partnerships with vendors, supported protocols, bandwidth, scope of access, implementation, support, network security, and pricing. Includes a checklist for a request for proposals on…

  16. Putting HR outsourcing into practice.

    PubMed

    Berger, Michael

    2007-01-01

    Faced with the time-consuming responsibility of human resources (HR) management, a growing number of medical practices are outsourcing their HR to professional employer organizations (PEOs) so they can concentrate on their core business. A PEO functions as an HR department-minus the high overhead-managing daily administrative tasks such as payroll processing and related tax filings, employee benefits, and workers' compensation coverage and claims resolution. PEOs help physicians' offices keep up with the piles of paperwork that never seem to shrink, freeing doctors to focus on patient care and building their practice. Because of their volume buying power, PEOs are able to offer employees of small medical practices big-company benefits-everything from health, dental, and vision coverage to long-term disability insurance and tuition assistance. A fledgling industry only a decade ago, HR outsourcing has morphed into a blossoming industry. Enlisting the services of a PEO is now considered de rigueur in many small business circles.

  17. 14 CFR 91.1437 - CAMP: Authority to perform and approve maintenance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Ownership Operations Program Management § 91.1437 CAMP: Authority to perform and approve maintenance. A program manager who maintains program aircraft under a CAMP may employ maintenance personnel, or make... maintenance. 91.1437 Section 91.1437 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF...

  18. Outsourcing information technology. An executive's guide to creating and managing IT contracts.

    PubMed

    Hoppszallern, Suzanna

    2003-01-01

    Many hospitals outsource one or more key areas of their IT operations, but not all are happy with the outcomes. In this special foldout, H&HN looks at what sectors hospitals should consider outsourcing and what questions to ask potential partners.

  19. Realising the Real Benefits of Outsourcing: Measurement Excellence and Its Importance in Achieving Long Term Value

    NASA Astrophysics Data System (ADS)

    Oshri, Ilan; Kotlarsky, Julia

    These days firms are, more than ever, pressed to demonstrate returns on their investment in outsourcing. While the initial returns can always be associated with one-off cost cutting, outsourcing arrangements are complex, often involving inter-related high-value activities, which makes the realisation of long-term benefits from outsourcing ever more challenging. Executives in client firms are no longer satisfied with the same level of service delivery through the outsourcing lifecycle. They seek to achieve business transformation and innovation in their present and future services, beyond satisfying service level agreements (SLAs). Clearly the business world is facing a new challenge: an outsourcing delivery system of high-value activities that demonstrates value over time and across business functions. However, despite such expectations, many client firms are in the dark when trying to measure and quantify the return on outsourcing investments: results of this research show that less than half of all CIOs and CFOs (43%) have attempted to calculate the financial impact of outsourcing to their bottom line, indicating that the financial benefits are difficult to quantify (51%).

  20. Collection development and outsourcing in academic health sciences libraries: a survey of current practices.

    PubMed Central

    Blecic, D D; Hollander, S; Lanier, D

    1999-01-01

    Academic health sciences libraries in the United States and Canada were surveyed regarding collection development trends, including their effect on approval plan and blanket order use, and use of outsourcing over the past four years. Results of the survey indicate that serials market forces, budgetary constraints, and growth in electronic resources purchasing have resulted in a decline in the acquisition of print items. As a result, approval plan use is being curtailed in many academic health sciences libraries. Although use of blanket orders is more stable, fewer than one-third of academic health sciences libraries report using them currently. The decline of print collections suggests that libraries should explore cooperative collection development of print materials to ensure access and preservation. The decline of approval plan use and the need for cooperative collection development may require additional effort for sound collection development. Libraries were also surveyed about their use of outsourcing. Some libraries reported outsourcing cataloging and shelf preparation of books, but none reported using outsourcing for resource selection. The reason given most often for outsourcing was that it resulted in cost savings. As expected, economic factors are driving both collection development and outsourcing practices. PMID:10219477

  1. Outsourcing and Libraries--Threat or Promise?

    ERIC Educational Resources Information Center

    Missingham, Roxanne

    1994-01-01

    Outsourcing has been proposed as a method for improving effectiveness and productivity in Australian public library service. Developments, drawbacks, and potentials are discussed, and differences between contracting out whole services as opposed to selected activities are examined. (AEF)

  2. Outsourcing Photocopying in a Library: One Experience.

    ERIC Educational Resources Information Center

    Wittorf, Robert

    1998-01-01

    Describes the process for outsourcing photocopying including developing a clear request for proposal, monitoring and responding to vendor performance, and ensuring quality controls in academic libraries. (Author/PEN)

  3. Outsourcing to exploit a key asset.

    PubMed

    Meerpoel, Lieven; Schroven, Marc; Goris, Koen; Demoen, Koen; Marsden, Siobhan

    2006-06-01

    Much has been written and debated about the economic and organizational advantages of outsourcing a growing list of operations in drug discovery. In what has been described as a modular approach to drug discovery, whole sections of the process are now handled very effectively by a wide variety of specialist suppliers to the pharmaceutical industry. Here we report on a novel outsourced solution to the challenge of consolidating and managing some of the key assets residing within a major research organization - its chemical intermediates. At Johnson and Johnson Pharmaceutical Research and Development this resource has been built up over a period of more than 40 years, and is added to daily. The challenge was to provide the company's scientists with a single source for its own and externally procured intermediates; the solution was developed working in partnership with Sigma-Aldrich.

  4. Peripheral neuropathy in military aircraft maintenance workers in Australia.

    PubMed

    Guest, Maya; Attia, John R; D'este, Catherine A; Boggess, May M; Brown, Anthony M; Gibson, Richard E; Tavener, Meredith A; Ross, James; Gardner, Ian; Harrex, Warren

    2011-04-01

    This study aimed to examine possible persisting peripheral neuropathy in a group who undertook fuel tank repairs on F-111 aircraft, relative to two contemporaneous comparison groups. Vibration perception threshold (VPT) was tested using biothesiometry in 614 exposed personnel, compared with two unexposed groups (513 technical trades and 403 nontrades). Regression modeling was used to examine associations, adjusting for possible confounders. We observed that 26% of participants had chronic persistent increased VPT in the great toe. In contrast, statistically significant higher VPT of the great toe was observed in the comparison groups; however, the effect was small, about 1/4 the magnitude of diabetes. Age, height, and diabetes were all significant and strong predictors in most models. This study highlights chronic persisting peripheral neuropathy in a population of aircraft maintainers.

  5. Comparison of Office-Based Versus Outsourced Immunization Recall Services.

    PubMed

    Bondurant, Kristina L; Wheeler, J Gary; Bursac, Zoran; Holmes, Tereasa; Tilford, J Mick

    2017-06-01

    Given poor use of recall in primary care practices, we compared outsourced versus office-based recall systems. From 2011 to 2013, we enrolled 87 individual Arkansas providers in distinct practices treating their own patients <24 months of age which were randomized to usual care (A), office-based (B), or outsourced (C) recall groups. At the end of study, recall activity was 19.4%, 55.0%, and 92.6% for Groups A, B, and C, respectively (B and C vs A: P < .001). Only 68 Group B patients were identified as needing immunizations versus 826 in Group C. The majority of successful contacts were made through mobile phone (41.3%) or text message (32.6%). The total cost per practice per week was significantly lower for Group C versus Group B ($39.50 and $53.00, respectively; P = .004). With limited electronic health record use, an outsourced recall system is more sustainable and less costly than an office-based system.

  6. CIOs use outsourcing to revamp systems.

    PubMed

    Morrissey, J

    1995-07-24

    Faced with the challenge of keeping pace with computer technology, many chief information officers are farming out projects to experts. Outsourcing firms are circling the healthcare industry, ready to pounce on market opportunities that exceeded $1 billion in 1994.

  7. Aviation Maintenance Technology. General. G104 Technical Mechanics. Instructor Material.

    ERIC Educational Resources Information Center

    Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    These instructor materials for an aviation maintenance technology course contain five instructional modules. The modules cover the following topics: performing aircraft ground handling and servicing, using hand and power tools and precision measuring instruments, identifying and selecting aircraft hardware, fabricating and installing rigid and…

  8. Patients' experience of outsourcing and care related to magnetic resonance examinations.

    PubMed

    Tavakol Olofsson, Parvin; Aspelin, Peter; Bergstrand, Lott; Blomqvist, Lennart

    2014-11-01

    Outsourcing radiological examinations from public university hospitals affects the patient, who has to attend a different clinic or hospital for the radiological examination. We currently have a limited understanding of how patients view outsourcing and their care related to MR examinations. To examine the experiences of patients who are sent to private radiology units when their referrals for MR examinations are outsourced from a university hospital, as well as to explore factors which influence patient satisfaction regarding the quality of care related to the MR examination. A group of patients (n = 160) referred for MR examinations and either examined at a university hospital or at an external private unit were interviewed. The interview was designed as a verbal questionnaire. Data were analyzed using Student's t test, analysis of variance (ANOVA), and Pearson's correlation. Sixty-nine percent of the patients could neither choose nor influence the location at which they were examined. For those who could, aspects that influenced the patient's choice of radiology department were: short waiting time 79% (127/160), ease of traveling to the radiology department 68% (110/160), and short distance to their home or work 58% (93/160). For 40% (60/160) of the patients, a short time in the waiting room was related to a positive experience of the MR examination. If patients were informed about outsourcing and could also choose where to have their examination, key factors contributing to patient satisfaction could be met even when MR examinations are outsourced.

  9. Durability of aircraft composite materials

    NASA Technical Reports Server (NTRS)

    Dextern, H. B.

    1982-01-01

    Confidence in the long term durability of advanced composites is developed through a series of flight service programs. Service experience is obtained by installing secondary and primary composite components on commercial and military transport aircraft and helicopters. Included are spoilers, rudders, elevators, ailerons, fairings and wing boxes on transport aircraft and doors, fairings, tail rotors, vertical fins, and horizontal stabilizers on helicopters. Materials included in the evaluation are boron/epoxy, Kevlar/epoxy, graphite/epoxy and boron/aluminum. Inspection, maintenance, and repair results for the components in service are reported. The effects of long term exposure to laboratory, flight, and outdoor environmental conditions are reported for various composite materials. Included are effects of moisture absorption, ultraviolet radiation, and aircraft fuels and fluids.

  10. The Impact of IT Outsourcing on Surviving Employees: Managing Survivor Syndrome Symptoms

    ERIC Educational Resources Information Center

    Lyons, Tony R.

    2010-01-01

    Global outsourcing of information technology functions has become a major tool used by organizations to increase or maintain competitive market positioning. One often overlooked in determining an organization's level of success from outsourcing is the negative impact on the behavioral and emotional well-being of surviving employees, often referred…

  11. Role of Outsourcing in Stress and Job Satisfaction of Information Technology Professionals

    ERIC Educational Resources Information Center

    Robinson, Janell R.

    2016-01-01

    Information technology (IT) outsourcing poses a potential job loss threat to IT professionals, which can decrease job security, job satisfaction, and organizational commitment. The problem that this study addressed was the perceived role of IT outsourcing in the job stress, job dissatisfaction, and turnover intention of IT professionals. The…

  12. Outsourcing Academic Development in Higher Education: Staff Perceptions of an International Program

    ERIC Educational Resources Information Center

    Dickson, Kerry; Hughes, Kate; Stephens, Bruce

    2017-01-01

    Increasingly, higher education support services are being outsourced. Our case study was of a program from a global, USA-based, non-profit organisation. From in-depth interviews, we investigated staff perceptions of academic development workshops and the efficacy of outsourcing to a transnational tertiary-support program. We found that…

  13. Maintenance of Airport Visual Aid Facilities

    DOT National Transportation Integrated Search

    1982-08-26

    This advisory circular provides recommended guidelines for maintenance of : airport visual aid facilities. Since the function of such facilities is to : assist in the safe and efficient movement of aircraft during landing, takeoff, : and taxiing mane...

  14. Does outsourcing paramedical departments of teaching hospitals affect educational status of the students?

    PubMed

    Moslehi, Shandiz; Atefimanesh, Pezhman; Sarabi Asiabar, Ali; Ahmadzadeh, Nahal; Kafaeimehr, Mohamadhosein; Emamgholizadeh, Saeid

    2016-01-01

    There is an increasing trend of outsourcing public departments. Teaching hospitals also outsourced some of their departments to private sectors. The aim of this study was to investigate and compare the educational status of students in public and outsourced departments of teaching hospitals affiliated to Iran University of Medical Sciences. This study was conducted in six teaching hospitals of Iran University of Medical Sciences, which had public and outsourced teaching departments in 2015. One hundred fifty students from the departments of radiology, physiotherapy and laboratory participated in this study and their perceptions about their educational status were assessed. A valid and reliable questionnaire was used; participation in the study was voluntary. Descriptive statistics such as mean (SD), t-test and Kolmogorov-Smirnov were used. No difference was detected between the educational status of students in public and outsourced departments of radiology, physiotherapy and laboratory (p>0.05). Based on the students' perception, the private sectors could maintain the educational level of the teaching departments similar to the public departments. It is recommended to involve all the stakeholders such as hospital administrators, academic staff and students in the decision- making process when changes in teaching environments are being considered.

  15. A cost benefit analysis of outsourced laboratory services.

    PubMed

    Bowers, J A

    1995-11-01

    As healthcare moves toward increased capitation, hospital administrators must be aware of all costs associated with patient services. This article describes the cost benefit analysis process used by northern Indiana hospital consumers during 1994-1995 to evaluate a local laboratory service outsource provider, South Bend Medical Foundation (SBMF). In an effort to meet the best interests of the community at large, three competing hospitals, medical leadership, and the local outsource provider joined forces to ensure that cost effective quality services would be provided. Laboratory utilization patterns for common DRGs were also analyzed. The team created a reconfiguration analysis to help develop benchmark figures for consideration in future contract negotiations.

  16. The Second Joint NASA/FAA/DOD Conference on Aging Aircraft. Pt. 1

    NASA Technical Reports Server (NTRS)

    Harris, Charles E. (Editor)

    1999-01-01

    The purpose of the Conference was to bring together world leaders in aviation safety research, aircraft design and manufacturing, fleet operation and aviation maintenance to disseminate information on current practices and advanced technologies that will assure the continued airworthiness of the aging aircraft in the military and commercial fleets. The Conference included reviews of current industry practices, assessments of future technology requirements, and status of aviation safety research. The Conference provided an opportunity for interactions among the key personnel in the research and technology development community, the original equipment manufacturers, commercial airline operators, military fleet operators, aviation maintenance, and aircraft certification and regulatory authorities. Conference participation was unrestricted and open to the international aviation community.

  17. Applications of advanced electric/electronic technology to conventional aircraft

    NASA Technical Reports Server (NTRS)

    Heimbold, R. L.

    1980-01-01

    The desirability of seven advanced technologies as applied to three commercial aircraft of 1985 to 1995 was investigated. Digital fly by wire, multiplexing, ring laser gyro, integrated avionics, all electric airplane, electric load management, and fiber optics were considered for 500 passenger, 50 passenger, and 30 passenger aircraft. The major figure of merit used was Net Value of Technology based on procurement and operating cost over the life of the aircraft. An existing computer program, ASSET, was used to resize the aircraft and evalute fuel usage and maintenance costs for each candidate configuration. Conclusions were that, for the 500 passenger aircraft, all candidates had a worthwhile payoff with the all electric airplane having a large payoff.

  18. Outsourcing data processing: planning for the disentanglement.

    PubMed

    Moss, M E; Gordon, M L

    1993-06-01

    Outsourcing data processing operations may be considered a conventional acquisition transaction between a customer and supplier. The most distinctive feature of a DP outsourcing contract is that it involves complex issues relating to computer software and technology and, frequently, intense issues relating to employees. But, one must do more in order to provide for preservation of the integrity (and, therefore, the value) of the data center. The contract must include not just the sale of a facility to a supplier who will take over the operations, but also terms for reconveying the facility at a future date. Getting out of the arrangement can be very complex. Disentanglement can be made less complex however, if the customer and the supplier negotiate all or part of the disentanglement procedures during the original contract proposal. Know ahead of time the possible scenarios for when disentanglement may take place and know what to do during the contract negotiations and during the length of the agreement to keep track of each other's properties. Know also the risks involved in outsourcing DP operations, such as what happens when the supplier's business fails. Having the supplier set up a separate profit entity for your contracted business or using a lien on the data center properties may help avoid loss if such failure occurs.

  19. Hybrid performance measurement of a business process outsourcing - A Malaysian company perspective

    NASA Astrophysics Data System (ADS)

    Oluyinka, Oludapo Samson; Tamyez, Puteri Fadzline; Kie, Cheng Jack; Freida, Ayodele Ozavize

    2017-05-01

    It's no longer new that customer perceived value for product and services are now greatly influenced by its psychological and social advantages. In order to meet up with the increasing operational cost, response time, quality and innovative capabilities many companies turned their fixed operational cost to a variable cost through outsourcing. Hence, the researcher explored different underlying outsourcing theories and infer that these theories are essential to performance improvement. In this study, the researcher evaluates the performance of a business process outsource company by a combination of lean and agile method. To test the hypotheses, we analyze different variability that a business process company faces, how lean and agile have been used in other industry to address such variability and discuss the result using a predictive multiple regression analysis on data collected from companies in Malaysia. The findings from this study revealed that while each method has its own advantage, a business process outsource company could achieve more (up to 87%) increase in performance level by developing a strategy which focuses on a perfect mixture of lean and agile improvement methods. Secondly, this study shows that performance indicator could be better evaluated with non-metrics variables of the agile method. Thirdly, this study also shows that business process outsourcing company could perform better when they concentrate more on strengthening internal process integration of employees.

  20. Effects of outsourcing magnetic resonance examinations from a public university hospital to a private agent.

    PubMed

    Tavakol, Parvin; Labruto, Fausto; Bergstrand, Lott; Blomqvist, Lennart

    2011-02-01

    Sometimes the measures taken to make a radiology department more effective, such as prioritizing the workload and keeping equipment running for as many hours as staffing permits, are not enough. In such cases, outsourcing radiological examinations is a potential solution for reducing waiting times. To investigate differences in waiting time, quality and costs between magnetic resonance (MR) examinations performed in a university hospital and examinations outsourced to private service. We retrospectively selected a group of consecutive, outsourced MR examinations (n=97) and a control group of in-house MR examinations, matched for type of examination. In each group there were referrals that had a specified preferred timeframe for completion. We measured the percentage of cases in which this timeframe was met and if it was not met, how many days exceeded the preferred time. In referrals without a specified preferred timeframe, we also calculated the waiting time. Quality standards were measured by the percentage of examinations that had to be re-done and re-assessed. Finally, we calculated the cumulative costs, taking into account the costs for re-doing and re-assessing examinations. There was no statistically significant difference between the groups, in either the number of examinations that were not performed within the preferred time or the number of days that exceeded the preferred timeframe. For referrals without a preferred timeframe, the waiting time was shorter for outsourced examinations than those not outsourced. There were no differences in the number of examinations that had to be re-done, but more examinations needed to be re-assessed in the outsourced group than in the in-house group. The calculated costs for outsourced examinations were lower than the costs for internally performed examinations. Outsourcing magnetic resonance examinations may be an effective way of reducing a radiology department's workload. Ways in which to reduce the additional costs

  1. Emerging trends in the outsourcing of medical and surgical care.

    PubMed

    Boyd, Jennifer B; McGrath, Mary H; Maa, John

    2011-01-01

    As total health care expenditures are expected to constitute an increasing portion of the US gross domestic product during the coming years, the US health care system is anticipating a historic spike in the need for care. Outsourcing medical and surgical care to other nations has expanded rapidly, and several ethical, legal, and financial considerations require careful evaluation. Ultimately, the balance between cost savings, quality, and patient satisfaction will be the key determinant in the future of medical outsourcing.

  2. Technology "Outsourcing": The Results Are Mixed.

    ERIC Educational Resources Information Center

    Blumenstyk, Goldie

    1999-01-01

    Reviews "outsourcing" of technology services by institutions of higher education, including the College of Notre Dame (California) and East Tennessee State University, and finds that, although external companies, especially COLLEGIS, offer expertise and savings, they sometimes do not understand the special problems of an academic…

  3. Patients’ experience of outsourcing and care related to magnetic resonance examinations

    PubMed Central

    Aspelin, Peter; Bergstrand, Lott; Blomqvist, Lennart

    2014-01-01

    Background Outsourcing radiological examinations from public university hospitals affects the patient, who has to attend a different clinic or hospital for the radiological examination. We currently have a limited understanding of how patients view outsourcing and their care related to MR examinations. Aim Aim. To examine the experiences of patients who are sent to private radiology units when their referrals for MR examinations are outsourced from a university hospital, as well as to explore factors which influence patient satisfaction regarding the quality of care related to the MR examination. Methods A group of patients (n = 160) referred for MR examinations and either examined at a university hospital or at an external private unit were interviewed. The interview was designed as a verbal questionnaire. Data were analyzed using Student’s t test, analysis of variance (ANOVA), and Pearson’s correlation. Results Sixty-nine percent of the patients could neither choose nor influence the location at which they were examined. For those who could, aspects that influenced the patient’s choice of radiology department were: short waiting time 79% (127/160), ease of traveling to the radiology department 68% (110/160), and short distance to their home or work 58% (93/160). For 40% (60/160) of the patients, a short time in the waiting room was related to a positive experience of the MR examination. Conclusion Conclusion. If patients were informed about outsourcing and could also choose where to have their examination, key factors contributing to patient satisfaction could be met even when MR examinations are outsourced. PMID:25142133

  4. Ultrasonic Measurement of Aircraft Strut Hydraulic Fluid Level

    NASA Technical Reports Server (NTRS)

    Allison, Sidney G.

    2002-01-01

    An ultrasonic method is presented for non-intrusively measuring hydraulic fluid level in aircraft struts in the field quickly and easily without modifying the strut or aircraft. The technique interrogates the strut with ultrasonic waves generated and received by a removable ultrasonic transducer hand-held on the outside of the strut in a fashion that is in the presence or absence of hydraulic fluid inside the strut. This technique was successfully demonstrated on an A-6 aircraft strut on the carriage at the Aircraft Landing Dynamics Research Facility at NASA Langley Research Center. Conventional practice upon detection of strut problem symptoms is to remove aircraft from service for extensive maintenance to determine fluid level. No practical technique like the method presented herein for locating strut hydraulic fluid level is currently known to be used.

  5. Outsourcing cleaning services increases MRSA incidence: Evidence from 126 english acute trusts.

    PubMed

    Toffolutti, Veronica; Reeves, Aaron; McKee, Martin; Stuckler, David

    2017-02-01

    There has been extensive outsourcing of hospital cleaning services in the NHS in England, in part because of the potential to reduce costs. Yet some argue that this leads to lower hygiene standards and more infections, such as MRSA and, perhaps because of this, the Scottish, Welsh, and Northern Irish health services have rejected outsourcing. This study evaluates whether contracting out cleaning services in English acute hospital Trusts (legal authorities that run one or more hospitals) is associated with risks of hospital-borne MRSA infection and lower economic costs. By linking data on MRSA incidence per 100,000 hospital bed-days with surveys of cleanliness among patient and staff in 126 English acute hospital Trusts during 2010-2014, we find that outsourcing cleaning services was associated with greater incidence of MRSA, fewer cleaning staff per hospital bed, worse patient perceptions of cleanliness and staff perceptions of availability of handwashing facilities. However, outsourcing was also associated with lower economic costs (without accounting for additional costs associated with treatment of hospital acquired infections). Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

  6. Depot Maintenance: Air Force is Assessing Engine Maintenance Options for Work Currently Performed at Kelly Aviation Center

    DTIC Science & Technology

    2011-02-11

    on TF39 engines, which are typically used for C-5 Galaxy aircraft; T56 engines, which are typically used for C-130 aircraft; and fuel accessories on...conducting separate cost-benefit analyses for the TF39 and T56 engine maintenance work. Under Air Force guidance for depot-level source-of-repair selection...Force has not developed specific risk mitigation plans for the TF39 or T56 engines because it is still assessing how the work will be performed

  7. Does outsourcing paramedical departments of teaching hospitals affect educational status of the students?

    PubMed Central

    Moslehi, Shandiz; Atefimanesh, Pezhman; Sarabi Asiabar, Ali; Ahmadzadeh, Nahal; Kafaeimehr, Mohamadhosein; Emamgholizadeh, Saeid

    2016-01-01

    Background: There is an increasing trend of outsourcing public departments. Teaching hospitals also outsourced some of their departments to private sectors. The aim of this study was to investigate and compare the educational status of students in public and outsourced departments of teaching hospitals affiliated to Iran University of Medical Sciences. Methods: This study was conducted in six teaching hospitals of Iran University of Medical Sciences, which had public and outsourced teaching departments in 2015. One hundred fifty students from the departments of radiology, physiotherapy and laboratory participated in this study and their perceptions about their educational status were assessed. A valid and reliable questionnaire was used; participation in the study was voluntary. Descriptive statistics such as mean (SD), t-test and Kolmogorov-Smirnov were used. Results: No difference was detected between the educational status of students in public and outsourced departments of radiology, physiotherapy and laboratory (p>0.05). Conclusion: Based on the students’ perception, the private sectors could maintain the educational level of the teaching departments similar to the public departments. It is recommended to involve all the stakeholders such as hospital administrators, academic staff and students in the decision- making process when changes in teaching environments are being considered. PMID:27683645

  8. Lightning Discharges to Aircraft and Associated Meteorological Conditions

    NASA Technical Reports Server (NTRS)

    Harrison, L P

    1946-01-01

    A summary is given of information on atmospheric electrical discharges to aircraft and associated meteorological conditions. Information is given that is designed to give a fairly comprehensive view of the underlying principles of meteorology and atmospheric electricity. Of special interest to pilots are lists of procedures of flight conduct and aircraft maintenance recommended foe avoiding or minimizing the hazards of disruptive electrical discharges and other severe conditions near thunderstorms.

  9. Model citizens. Outsourcing helps start-up Medicare HMO.

    PubMed

    Slavic, B; Adami, S

    1999-04-01

    Health Plans of Pennsylvania (HPP), the managed care arm of Crozer-Keystone Health System, in Media, Pa. Selecting the information systems and building the infrastructure to support the start-up of a new Medicare HMO product. HPP chose to outsource the information systems needed to integrate all the components of managed care administration into a cost-effective and cohesive program. Because of its aggressive programming and start-up of the MedCarePlus product offering, HPP became the first plan in the country to submit Medicare claims data electronically for encounter reporting to the Health Care Financing Administration (HCFA). "Through an integrated team approach, an organization truly can benefit from the economies of scale gained through outsourcing."

  10. 14 CFR 141.89 - Maintenance of personnel, facilities, and equipment.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Maintenance of personnel, facilities, and... Maintenance of personnel, facilities, and equipment. The holder of a pilot school certificate or provisional... training unless: (a) Each airport, aircraft, and facility necessary for that training meets the standards...

  11. 14 CFR 141.89 - Maintenance of personnel, facilities, and equipment.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Maintenance of personnel, facilities, and... Maintenance of personnel, facilities, and equipment. The holder of a pilot school certificate or provisional... training unless: (a) Each airport, aircraft, and facility necessary for that training meets the standards...

  12. 14 CFR 141.89 - Maintenance of personnel, facilities, and equipment.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Maintenance of personnel, facilities, and... Maintenance of personnel, facilities, and equipment. The holder of a pilot school certificate or provisional... training unless: (a) Each airport, aircraft, and facility necessary for that training meets the standards...

  13. 14 CFR 141.89 - Maintenance of personnel, facilities, and equipment.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Maintenance of personnel, facilities, and... Maintenance of personnel, facilities, and equipment. The holder of a pilot school certificate or provisional... training unless: (a) Each airport, aircraft, and facility necessary for that training meets the standards...

  14. 14 CFR 141.89 - Maintenance of personnel, facilities, and equipment.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Maintenance of personnel, facilities, and... Maintenance of personnel, facilities, and equipment. The holder of a pilot school certificate or provisional... training unless: (a) Each airport, aircraft, and facility necessary for that training meets the standards...

  15. The Perceived Effect of Hidden Costs on the Operational Management of Information Technology Outsourcing: A Qualitative Study

    ERIC Educational Resources Information Center

    Swift, Ian

    2011-01-01

    Information technology (IT) outsourcing is a business trend aimed at reducing costs and enabling companies to concentrate on their core competencies. This qualitative multiple case design research study explored the effects of hidden costs on the operational management of IT outsourcing. The study involved analyzing IT outsourcing agreements as…

  16. Effective Monitoring and Control of Outsourced Software Development Projects

    NASA Astrophysics Data System (ADS)

    Ponisio, Laura; Vruggink, Peter

    In our study of four outsourcing projects we discover mechanisms to support managerial decision making during software development processes. We report on Customer Office, a framework used in practice that facilitates reasoning about projects by highlighting information paths and making co-ordination issues explicit. The results suggest a key role of modularisation and standardisation to assist in value creation, by facilitating information flow and keeping the overview of the project. The practical implications of our findings are guidelines for managing outsourcing projects such as to have a modularised view of the project based on knowledge domains and to standardise co-ordination operations.

  17. Domestic outsourcing and multitasking: How much do they really contribute?

    PubMed

    Sullivan, Oriel; Gershuny, Jonathan

    2013-09-01

    The bulk of responsibility for domestic work and childcare in heterosexual couples falls on women. But the means they find to cope with this load, and how these means relate to the factors underpinning the division of labor are not often studied. Two much-cited ways of reducing overall work time are purchasing domestic assistance (outsourcing) and the multitasking of domestic/caring tasks. Using UK 2000/2001 time-use data (N=4196 couples), we find domestic outsourcing is related to having dependent children and to partners' resources, but has little impact on the total domestic/caring workload of either partner. Nor can outsourcing account for the reduction in women's unpaid labor with increasing economic resources. Wives spend more time multitasking than husbands, but their proportion of multitasked domestic time is similar, and is not affected by resources or dependent children. Domestic multitasking seems to be more related to opportunity (time at home) than to time pressure. Copyright © 2013 Elsevier Inc. All rights reserved.

  18. Classification of Aircraft Maneuvers for Fault Detection

    NASA Technical Reports Server (NTRS)

    Oza, Nikunj C.; Tumer, Irem Y.; Tumer, Kagan; Huff, Edward M.; Clancy, Daniel (Technical Monitor)

    2002-01-01

    Automated fault detection is an increasingly important problem in aircraft maintenance and operation. Standard methods of fault detection assume the availability of either data produced during all possible faulty operation modes or a clearly-defined means to determine whether the data is a reasonable match to known examples of proper operation. In our domain of fault detection in aircraft, the first assumption is unreasonable and the second is difficult to determine. We envision a system for online fault detection in aircraft, one part of which is a classifier that predicts the maneuver being performed by the aircraft as a function of vibration data and other available data. We explain where this subsystem fits into our envisioned fault detection system as well its experiments showing the promise of this classification subsystem.

  19. Three Interdisciplinary Studies on IT Outsourcing

    ERIC Educational Resources Information Center

    Gantman, Sonia Vilvovsky

    2012-01-01

    This dissertation provides interdisciplinary insights into the role of client's internal collaborative experience in managing communication during a complex outsourced project, building a quality client-vendor relationship and ultimately achieving success in the project. Each of the three studies in this dissertation identifies a gap in…

  20. AIRCRAFT MAINTENANCE ENABLED JOINT CONCEPT FOR ENTRY OPERATIONS

    DTIC Science & Technology

    2017-04-06

    approach to manpower consolidation on a scale similar to what Rivet Workforce accomplished in the 1980s and 1990s. A consolidation based on aircraft...Logistics for the AirSea Battle,” Research (Maxwell Air Force Base , Alabama: Air Force Fellows, March 2011), 19. 36 “The Aviationist » Rapid Raptor...USAF A Research Report Submitted to the Faculty In Partial Fulfillment of the Graduation Requirements Advisor: Col Daniel Runyon 6 April 2017

  1. General-Purpose Electronic System Tests Aircraft

    NASA Technical Reports Server (NTRS)

    Glover, Richard D.

    1989-01-01

    Versatile digital equipment supports research, development, and maintenance. Extended aircraft interrogation and display system is general-purpose assembly of digital electronic equipment on ground for testing of digital electronic systems on advanced aircraft. Many advanced features, including multiple 16-bit microprocessors, pipeline data-flow architecture, advanced operating system, and resident software-development tools. Basic collection of software includes program for handling many types of data and for displays in various formats. User easily extends basic software library. Hardware and software interfaces to subsystems provided by user designed for flexibility in configuration to meet user's requirements.

  2. The decision-making matrix of propensity to outsourcing hospital services in Bandar Abbas, Iran.

    PubMed

    Hayati, Ramin; Setoodehzadeh, Fateme; Heydarvand, Sanaz; Khammarnia, Mohammad; Ravangard, Ramin; Sadeghi, Ahmad; Sobhani, Ghasem

    2015-12-01

    To determine the level of managers' propensity for outsourcing the services in hospitals using decision-making matrix. The applied, cross-sectional study was conducted at three hospitals affiliated to Bandar Abbas University of Medical Sciences, Iran, in 2013, and comprised managers and employees of four service units: radiology, laboratory, nursing, and nutrition services. Data was collected using two questionnaires and face-to-face interviews. Data was analysed using SPSS 16 and by using decision-making matrix. Of the 122 subjects in the study, 12(9.8%) were managers and 110(90.2%) were other employees. The highest and lowest propensities for outsourcing were related to nutrition (66.6%) and nursing services one (8.33%). The decision-making matrix showed low outsourcing of the nursing, radiology, and laboratory services based on the services' features. However, there were difference between the results obtained from laboratory service decision-making matrix and the propensity for laboratory service outsourcing. The difference between the results obtained from the matrix and managers' viewpoint can be due to the lack of managers' sufficient attention to the features of hospital services when making decisions on outsourcing them.

  3. How Continental Bank outsourced its "crown jewels.".

    PubMed

    Huber, R L

    1993-01-01

    No industry relies more on information than banking does, yet Continental, one of America's largest banks, outsources its information technology. Why? Because that's the best way to service the customers that form the core of the bank's business, says vice chairman Dick Huber. In the late 1970s and early 1980s, Continental participated heavily with Penn Square Bank in energy investments. When falling energy prices burst Penn Square's bubble in 1982, Continental was stuck with more than $1 billion in bad loans. Eight years later when Dick Huber came on board, Continental was working hard to restore its once solid reputation. Executives had made many tough decisions already, altering the bank's focus from retail to business banking and laying off thousands of employees. Yet management still needed to cut costs and improve services to stay afloat. Regulators, investors, and analysts were watching every step. Continental executives, eager to focus on the bank's core mission of serving business customers, decided to outsource one after another in-house service--from cafeteria services to information technology. While conventional wisdom holds that banks must retain complete internal control of IT, Continental bucked this argument when it entered into a ten-year, multimillion-dollar contract with Integrated Systems Solutions Corporation. Continental is already reaping benefits from outsourcing IT. Most important, Continental staffers today focus on their true core competencies: intimate knowledge of customers' needs and relationships with customers.

  4. Maneuver Classification for Aircraft Fault Detection

    NASA Technical Reports Server (NTRS)

    Oza, Nikunj C.; Tumer, Irem Y.; Tumer, Kagan; Huff, Edward M.

    2003-01-01

    Automated fault detection is an increasingly important problem in aircraft maintenance and operation. Standard methods of fault detection assume the availability of either data produced during all possible faulty operation modes or a clearly-defined means to determine whether the data provide a reasonable match to known examples of proper operation. In the domain of fault detection in aircraft, identifying all possible faulty and proper operating modes is clearly impossible. We envision a system for online fault detection in aircraft, one part of which is a classifier that predicts the maneuver being performed by the aircraft as a function of vibration data and other available data. To develop such a system, we use flight data collected under a controlled test environment, subject to many sources of variability. We explain where our classifier fits into the envisioned fault detection system as well as experiments showing the promise of this classification subsystem.

  5. An artificial intelligence-based structural health monitoring system for aging aircraft

    NASA Technical Reports Server (NTRS)

    Grady, Joseph E.; Tang, Stanley S.; Chen, K. L.

    1993-01-01

    To reduce operating expenses, airlines are now using the existing fleets of commercial aircraft well beyond their originally anticipated service lives. The repair and maintenance of these 'aging aircraft' has therefore become a critical safety issue, both to the airlines and the Federal Aviation Administration. This paper presents the results of an innovative research program to develop a structural monitoring system that will be used to evaluate the integrity of in-service aerospace structural components. Currently in the final phase of its development, this monitoring system will indicate when repair or maintenance of a damaged structural component is necessary.

  6. Alcohol drinking behaviors and alcohol management policies under outsourcing work conditions: A qualitative study of construction workers in Taiwan.

    PubMed

    Cheng, Wan-Ju; Cheng, Yawen

    2016-02-01

    Workplace alcohol policies are crucial for workers' health and safety. The practice of outsourcing is gaining popularity around the world and was found to be associated with poorer health in the working population. This study aimed to examine how outsourcing complicates the implementation of workplace alcohol policies and affects workers' drinking behaviors. In-depth interviews were conducted with 16 outsource workers, 3 subcontractors and 3 worksite supervisors. Information regarding workers' drinking behaviors, their knowledge, and attitudes toward workplace alcohol policy were analyzed using a qualitative thematic analysis. Factors associated with poor workplace alcohol management included smaller size and private ownership of outsourcers, subcontractors' own drinking behavior and positive attitude to alcohol, and precarious employment conditions of outsourcing workers. The multilateral relationship between outsourcers, subcontractors, and workers complicated and impaired the implementation of workplace alcohol policies. The implementation of workplace alcohol management policies was hampered in outsourcing work conditions due to poor coordination of supervisors in the subcontract chain. The enforcement of alcohol policies in the workplace should be strengthened by consolidating management responsibilities of outsourcers and subcontractors. Copyright © 2015 Elsevier B.V. All rights reserved.

  7. Concerns and hopes about outsourcing decisions regarding health information management services at two teaching hospitals in Semnan, Iran.

    PubMed

    Kahouei, Mehdi; Farrokhi, Maryam; Abadi, Zahra Nasr; Karimi, Arefe

    2016-04-01

    Changes in health programs in Iran have led to an increase in administrative costs. One cost-saving option available to hospital administrators is to outsource administrative services. This study aimed to explore the attitudes of hospital staff towards outsourcing health information management services in advance of a decision being taken, to assist healthcare organisations to assess the potential benefits and challenges of outsourcing such services. Six hundred and four clinical and allied health employees in two hospitals in Iran, who had had prior experience with outsourcing hospital services, responded to a survey designed to measure staff attitudes towards outsourcing health information management services, based on their perceptions of potential costs and benefits for the organisation and their own employment prospects. A 16-item attitude scale, developed by the researchers, was used in the study and demographic data were also collected. Summary statistics showed that approximately one third of the sample (34.53%) had a negative view of outsourcing, one third (35.16%) had a positive view, and 30.31% were neutral. An exploratory factor analysis of items on the attitude scale identified three underlying constructs, labelled: data security and management; workplace environment; and staff and customer satisfaction. One item (concern about the impact of outsourcing on staffing levels) did not load on any of the factors. A separate analysis of this single item showed a significant relationship between the sex of participants and their views on the impact of outsourcing on the number of hospital staff employed (p<0.05). While results of this study indicated that staff in hospitals surveyed held both positive and negative views of outsourcing, a large number of staff in these hospitals (a third of the total sample) had reservations about the skills of outside providers to securely manage hospital data, and did not consider that outsourcing health information

  8. Outsourcing critical financial system operations.

    PubMed

    Cox, Nora; Pilbauer, Jan

    2018-01-01

    Payments Canada provides Canada's national payments systems and is responsible for the clearing and settlement infrastructure, processes and rules that underpin the exchange of billions of dollars each day through the Canadian economy. Strategic sourcing is a reality for this small organisation with a broad scope of national regulations and global standards to comply with. This paper outlines Payments Canada's approach to outsourcing its critical financial system operations, which centres on four key principles: strong relationship management; continuous learning, recording and reporting; evaluating the business landscape; and a commitment to evolving the organisation to greater resilience. This last point is covered in detail with an exploration of the organisation's resilience and security strategy as well as its risk appetite. As Payments Canada progresses to its future state, which includes modernising its core payment systems, underlying rules and standards, risk management for the industry as a whole will remain at the forefront of its collective mind. The expectation is that outsourcing will remain a fundamental element of its operating model in future, a strategy that will ensure the organisation can focus on its core business competencies and eliminate the need to develop and support in-house expertise in commodity areas.

  9. 14 CFR 43.3 - Persons authorized to perform maintenance, preventive maintenance, rebuilding, and alterations.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... certificate holder has written procedures available to the pilot to evaluate the accomplishment of the task... alterations as provided in part 121 or 135. (g) Except for holders of a sport pilot certificate, the holder of a pilot certificate issued under part 61 may perform preventive maintenance on any aircraft owned or...

  10. Maintenance Audit through Value Analysis Technique: A Case Study

    NASA Astrophysics Data System (ADS)

    Carnero, M. C.; Delgado, S.

    2008-11-01

    The increase in competitiveness, technological changes and the increase in the requirements of quality and service have forced a change in the design and application of maintenance, as well as the way in which it is considered within the managerial strategy. There are numerous maintenance activities that must be developed in a service company. As a result the maintenance functions as a whole have to be outsourced. Nevertheless, delegating this subject to specialized personnel does not exempt the company from responsibilities, but rather leads to the need for control of each maintenance activity. In order to achieve this control and to evaluate the efficiency and effectiveness of the company it is essential to carry out an audit that diagnoses the problems that could develop. In this paper a maintenance audit applied to a service company is developed. The methodology applied is based on the expert systems. The expert system by means of rules uses the weighting technique SMART and value analysis to obtain the weighting between the decision functions and between the alternatives. The expert system applies numerous rules and relations between different variables associated with the specific maintenance functions, to obtain the maintenance state by sections and the general maintenance state of the enterprise. The contributions of this paper are related to the development of a maintenance audit in a service enterprise, in which maintenance is not generally considered a strategic subject and to the integration of decision-making tools such as the weighting technique SMART with value analysis techniques, typical in the design of new products, in the area of the rule-based expert systems.

  11. The Temptations and Realities of Outsourcing

    ERIC Educational Resources Information Center

    Wertz, Richard D.

    2005-01-01

    As colleges and universities attempt to produce additional revenue and enhance their services, more are entering into contracts with private companies. Some agreements involve lengthy commitments, and this means that outsourcing contracts require thorough review by boards of trustees, which are being called upon to act with greater diligence to…

  12. Outsourcing issues for nurse practitioner practices.

    PubMed

    Mackey, Thomas A; McNiel, Nancy O; Klingensmith, Kenneth

    2004-01-01

    Nurse practitioner managed practices face multiple business and clinical processes. While most practice managers are prepared as clinicians, they are not well prepared to deal with the daily multiple business infrastructure issues they face. To provide for increased efficiency and effectiveness, nurse practitioner practices should consider outsourcing context business functions.

  13. Architecture and Key Techniques of Augmented Reality Maintenance Guiding System for Civil Aircrafts

    NASA Astrophysics Data System (ADS)

    hong, Zhou; Wenhua, Lu

    2017-01-01

    Augmented reality technology is introduced into the maintenance related field for strengthened information in real-world scenarios through integration of virtual assistant maintenance information with real-world scenarios. This can lower the difficulty of maintenance, reduce maintenance errors, and improve the maintenance efficiency and quality of civil aviation crews. Architecture of augmented reality virtual maintenance guiding system is proposed on the basis of introducing the definition of augmented reality and analyzing the characteristics of augmented reality virtual maintenance. Key techniques involved, such as standardization and organization of maintenance data, 3D registration, modeling of maintenance guidance information and virtual maintenance man-machine interaction, are elaborated emphatically, and solutions are given.

  14. 78 FR 1728 - Airworthiness Directives; Thielert Aircraft Engines GmbH Reciprocating Engines

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-09

    ... scheduled maintenance, whichever occurs first, do the following. (1) Remove the oil filler plug and check... Airworthiness Directives; Thielert Aircraft Engines GmbH Reciprocating Engines AGENCY: Federal Aviation... all Thielert Aircraft Engines GmbH (TAE) TAE 125-02-99 and TAE 125-02-114 reciprocating engines. This...

  15. The Outsourcing of Health, Sport and Physical Educational Work: A State of Play

    ERIC Educational Resources Information Center

    Williams, Benjamin James; Hay, Peter James; Macdonald, Doune

    2011-01-01

    Background: The outsourcing of health, sport and physical educational (HSPE) work has been a feature of physical education (PE) "futures talk" for over 20 years. However, HSPE work outsourcing has been the focus of little empirical research and only occasional commentary. That small amount of empirical research that has been conducted…

  16. [Development of pneumoconiosis and outsourcing work in peruvian miners].

    PubMed

    Cáceres-Mejía, Brenda; Mayta-Tristán, Percy; Pereyra-Elías, Reneé; Collantes, Héctor; Cáceres-Leturia, Walter

    2015-10-01

    The aim of this study is to evaluate the association between the time of outsourced work and the development of pneumoconiosis in Peruvian miners who attended the "Centro Nacional de Salud Ocupacional y Protección al Ambiente para la Salud" between 2008 and 2011. Retrospective case-control study. Cases were defined as workers diagnosed of pneumoconiosis under standardized criteria. Outsourced work was defined as the time (in months) of work in a company that does not own the primary mining project. The project owner company was registered in the Mining Companies Directory (Ministerio de Energía y Minas). We used multiple logistic regression with crude and adjusted ORs. The study comprised 391 cases and 1519 controls. In both groups, most of the study subjects had a level of education lower than complete high school and were born and currently lived in the Peruvian highlands. There was statistically significant association between more frequency of pneumoconiosis and working 10 or more years in an outsourced company (OR: 1.50; 95%CI: 1.05-1.14; p=0.026). Miners with pneumoconiosis were more likely not to have education (OR: 3.07; 95%CI: 1.55-6.08; p=0.001), be currently living at the Peruvian highlands (OR: 1.40; 95%CI: 1.10-1.78; p=0.007) and to have more than 20 years of underground work history (OR: 8.92; 95%CI: 4.53-18.25; p<0.001). A statistically significant association was found between pneumoconiosis and the time of outsourced work. Not having education, residing in the Peruvian highlands and the time of underground work were associated risk factors.

  17. Improving Maintenance Data Collection Via Point-of- Maintenance (POMX) Implementation

    DTIC Science & Technology

    2006-03-01

    accurate documentation, (3) identifying and correcting the root causes for poor data integrity, and (4) educating the unit on the critical need for data ...the validity of the results. The data in this study were analyzed using the SAS JMP 6.0 statistical software package. The results for the tests...traditional keyboard data entry methods at a computer terminal. These terminals are typically located in the aircraft maintenance unit (AMU) facility , away

  18. Improving Maintenance Data Collection Via Point-Of-Maintenance (POMX) Implementation

    DTIC Science & Technology

    2006-03-01

    accurate documentation, (3) identifying and correcting the root causes for poor data integrity, and (4) educating the unit on the critical need for data ...the validity of the results. The data in this study were analyzed using the SAS JMP 6.0 statistical software package. The results for the tests...traditional keyboard data entry methods at a computer terminal. These terminals are typically located in the aircraft maintenance unit (AMU) facility , away

  19. The Lived Experiences of Federal Agency Information-Technology Employees in Times of Outsourcing

    ERIC Educational Resources Information Center

    Sudi, Linda

    2010-01-01

    United States (U.S.) federal agencies and other organizations are turning to Information Technology (IT) as a strategy for improving business productivity. Despite the rapid growth of outsourcing, few studies have been conducted on the effect of outsourcing on employees who remain with the company. In the current qualitative study, the effect of…

  20. NOISECHECK Procedures for Measuring Noise Exposure from Aircraft Operations

    DTIC Science & Technology

    1980-11-01

    in § afterburner , 8 min € MIL PVR, 8 min 6 80« rpm, and 20 min « idle). Aircraft Maintenance and Runup Log Procedure 1. Log every maintenance...OoMirtnat OltUnct »it« Profilt & SEL utt Eq. l Stipolt- « tnt I Fro» lorkihttt 7 NOISEFILE Sa ♦ 4 SEL Sltnt OltUnct WtSEFlLE SEL Mrtrift

  1. Soil analyses and evaluations at the impact dynamics research facility for two full-scale aircraft crash tests

    NASA Technical Reports Server (NTRS)

    Cheng, R. Y. K.

    1977-01-01

    The aircraft structural crash behavior and occupant survivability for aircraft crashes on a soil surface was studied. The results of placement, compaction, and maintenance of two soil test beds are presented. The crators formed by the aircraft after each test are described.

  2. Outsourcing and benchmarking in a rural public hospital: does economic theory provide the complete answer?

    PubMed

    Young, S H

    2003-01-01

    The ideology and pronouncements of the Australian Government in introducing 'competitive neutrality' to the public sector has improved efficiency and resource usage. In the health sector, the Human Services Department directed that non-clinical and clinical areas be market tested through benchmarking services against the private sector, with the possibility of outsourcing. These services included car parking, computing, laundry, engineering, cleaning, catering, medical imaging (radiology), pathology, pharmacy, allied health and general practice. Managers, when they choose between outsourcing, and internal servicing and production, would thus ideally base their decision on economic principles. Williamson's transaction cost theory studies the governance mechanisms that can be used to achieve economic efficiency and proposes that the optimal organisation structure is that which minimises transaction costs or the costs of exchange. Williamson proposes that four variables will affect such costs, namely: (i) frequency of exchange; (ii) asset specificity; (iii) environmental uncertainty; and (iv) threat of opportunism. This paper provides evidence from a rural public hospital and examines whether Williamson's transaction cost theory is applicable. Case study research operates within the interpretivism paradigm and is used in this research to uncover why the outsourcing decision was made. Such research aims to study real-life experiences by examining the way people think and act and, in contrast to positivism, allows the interviewer to participate to better understand the details and features of the experiences. In the present research, individual interviews were conducted with managers of the hospital and owners and staff of the vendor organisations using semi- and unstructured questions to ascertain the extent of, and processes used in, outsourcing specific functional areas, and areas that were not outsourced. Pathology, radiology, dental technician services and lawn

  3. Outsourcing Extra-Curricular Activities: A Management Strategy in a Time of Neoliberal Influence

    ERIC Educational Resources Information Center

    Ng, Shun Wing; Chan, Tsan Ming Kenneth; Yuen, Wai Kwan Gail

    2017-01-01

    Purpose: The purpose of this paper is to report on an exploratory study designed to illuminate the complexity of outsourcing extra-curricular activities (ECAs) in primary schools in a time of neoliberal influence and to examine the views of teaching professionals on the reasons, issues and considerations of outsourcing ECAs such as the dynamic…

  4. Virtual Trust in US-India Global Outsource Teams: A Qualitative Exploratory Case Study

    ERIC Educational Resources Information Center

    Gugliotti, Domenic

    2017-01-01

    The purpose of this qualitative exploratory case study was to identify and analyze, trust behaviors used by members of an outsourced virtual team in an on and offshore engagement. The inability to build trust in outsourced engagements can cause serious damage to the collaboration within the virtual team causing it to fail. This study provides…

  5. Development of a Computerised Method of Determining Aircraft Maintenance Intervals.

    DTIC Science & Technology

    1985-09-01

    Reliability. Vol.17. 1978. pp461-464. 23. , and Shunji Osaki. "Optimum Preventive Maintenance Policies for a 2-Unit Redundant System." IEEE...Transactions on Reliability. Vol.R-23. No.2. June 1974. pp86-91. 24. _ _, and Shunji Osaki. "A Summary of Optimum Preventive Maintenance Policies for a Two-Unit

  6. The drive for Aircraft Energy Efficiency

    NASA Technical Reports Server (NTRS)

    James, R. L., Jr.; Maddalon, D. V.

    1984-01-01

    NASA's Aircraft Energy Efficiency (ACEE) program, which began in 1976, has mounted a development effort in four major transport aircraft technology fields: laminar flow systems, advanced aerodynamics, flight controls, and composite structures. ACEE has explored two basic methods for achieving drag-reducing boundary layer laminarization: the use of suction through the wing structure (via slots or perforations) to remove boundary layer turbulence, and the encouragement of natural laminar flow maintenance through refined design practices. Wind tunnel tests have been conducted for wide bodied aircraft equipped with high aspect ratio supercritical wings and winglets. Maneuver load control and pitch-active stability augmentation control systems reduce fuel consumption by reducing the drag associated with high aircraft stability margins. Composite structures yield lighter airframes that in turn call for smaller wing and empennage areas, reducing induced drag for a given payload. In combination, all four areas of development are expected to yield a fuel consumption reduction of 40 percent.

  7. Outsourcing of Instruction at Community Colleges

    ERIC Educational Resources Information Center

    Bailey, Thomas; Jacobs, James; Jenkins, Davis

    2004-01-01

    This report presents the findings of exploratory research designed to identify the characteristics of the outsourcing of instruction at community colleges and the forces that promote or block its spread. It is the second in a series of reports by the National Center for Postsecondary Improvement and the Community College Research Center on the…

  8. Evolving Relationship Structures in Multi-sourcing Arrangements: The Case of Mission Critical Outsourcing

    NASA Astrophysics Data System (ADS)

    Heitlager, Ilja; Helms, Remko; Brinkkemper, Sjaak

    Information Technology Outsourcing practice and research mainly considers the outsourcing phenomenon as a generic fulfilment of the IT function by external parties. Inspired by the logic of commodity, core competencies and economies of scale; assets, existing departments and IT functions are transferred to external parties. Although the generic approach might work for desktop outsourcing, where standardisation is the dominant factor, it does not work for the management of mission critical applications. Managing mission critical applications requires a different approach where building relationships is critical. The relationships involve inter and intra organisational parties in a multi-sourcing arrangement, called an IT service chain, consisting of multiple (specialist) parties that have to collaborate closely to deliver high quality services.

  9. Outsourcing as an Airline Strategy

    NASA Technical Reports Server (NTRS)

    Rutner, Stephen M.; Brown, John H.

    1999-01-01

    Since the deregulation of the airline industry, carriers have searched for any method to improve their competitive position. At the same time, there has been a growth in the use of Third Party Logistics throughout corporate America. This paper presents an overview of the Third Party Logistics system of outsourcing and insourcing within the airline industry. This discussion generated a number of propositions, possible future scenarios and opportunities for empirical testing.

  10. Outsourcing as an Airline Strategy

    NASA Technical Reports Server (NTRS)

    Brown, John H.; Rutner, Stephen M.

    1999-01-01

    Since the deregulation of the airline industry, carriers have searched for any method to improve their competitive position. At the same time, there has been a growth in the use of Third Party Logistics throughout corporate America, This paper presents an overview of the Third Party Logistics system of outsourcing and insourcing within the airline industry. This discussion generated a number of propositions, possible future scenarios and opportunities for empirical testing.

  11. Outsourced probe data effectiveness on signalized arterials

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sharifi, Elham; Young, Stanley Ernest; Eshragh, Sepideh

    This paper presents results of an I-95 Corridor Coalition sponsored project to assess the ability of outsourced vehicle probe data to provide accurate travel time on signalized roadways for the purposes of real-time operations as well as performance measures. The quality of outsourced probe data on freeways has led many departments of transportation to consider such data for arterial performance monitoring. From April 2013 through June of 2014, the University of Maryland Center for Advanced Transportation Technology gathered travel times from several arterial corridors within the mid-Atlantic region using Bluetooth traffic monitoring (BTM) equipment, and compared these travel times withmore » the data reported to the I95 Vehicle Probe Project (VPP) from an outsourced probe data vendor. The analysis consisted of several methodologies: (1) a traditional analysis that used precision and bias speed metrics; (2) a slowdown analysis that quantified the percentage of significant traffic disruptions accurately captured in the VPP data; (3) a sampled distribution method that uses overlay methods to enhance and analyze recurring congestion patterns. (4) Last, the BTM and VPP data from each 24-hour period of data collection were reviewed by the research team to assess the extent to which VPP captured the nature of the traffic flow. Based on the analysis, probe data is recommended only on arterial roadways with signal densities (measured in signals per mile) up to one, and it should be tested and used with caution for signal densities between one and two, and is not recommended when signal density exceeds two.« less

  12. Pulsed Holographic Nondestructive Testing On Aircraft

    NASA Astrophysics Data System (ADS)

    Fagot, Hubert; Smigielski, Paul; Albe, Felix; Arnaud, Jean-Louis

    1983-06-01

    An holographic camera composed of two ruby lasers was built at ISL. It provides double exposure holograms with an adjustable time interval ranging from few ns to infinity. Various aircraft structures were first tested at ISL in laboratory conditions: honeycomb panels, wings ... The industrial tests on a military aircraft in maintenance checking were performed in a hangar of the SNIAS at Saint-Nazaire: wings, trap-door of the rear landing gear, air-brake... Electromechanical shocks were used to make the structure vibrate and to allow a fast trigger of the lasers. This avoids disturbance due to ambiant noises and vibrations.

  13. Utilization of sonar technology and microcontroller towards reducing aviation hazards during ground handling of aircraft

    NASA Astrophysics Data System (ADS)

    Khanam, Mosammat Samia; Biswas, Debasish; Rashid, Mohsina; Salam, Md Abdus

    2017-12-01

    Safety is one of the most important factors in the field of aviation. Though, modern aircraft are equipped with many instruments/devices to enhance the flight safety but it is seen that accidents/incidents are never reduced to zero. Analysis of the statistical summary of Commercial Jet Airplane accidents highlights that fatal accidents that occurred worldwide from 2006 through 2015 is 11% during taxing, loading/unloading, parking and towing. Human, handling the aircrafts is one of the most important links in aircraft maintenance and hence play a significant role in aviation safety. Effort has been made in this paper to obviate human error in aviation and outline an affordable system that monitors the uneven surface &obstacles for safe "towing in" and "towing out" of an aircraft by the ground crew. The system revolves around implementation of sonar technology by microcontroller. Ultrasonic sensors can be installed on aircraft wings and tail section to identify the uneven surface &obstacles ahead and provide early warning to the maintenance ground crews.

  14. Outsourcing occupational health services. Critical elements.

    PubMed

    Dyck, Dianne

    2002-02-01

    Successful management of an outsourcing relationship produces a highly interactive, flexible relationship between two organizations. The unique skills and resources of the service provider can be leveraged by the purchasing organization to achieve its business goals. Occupational and environmental health nurses can orchestrate this process and implement this important management tool in the provision of quality occupational health services.

  15. The Relationship between Return on Profitability and Costs of Outsourcing Information Technology Technical Support

    ERIC Educational Resources Information Center

    Odion, Segun

    2011-01-01

    The purpose of this quantitative correlational research study was to examine the relationship between costs of operation and total return on profitability of outsourcing information technology technical support in a two-year period of outsourcing operations. United States of America list of Fortune 1000 companies' chief information officers…

  16. Outsourcing drug discovery to India and China: from surviving to thriving.

    PubMed

    Subramaniam, Swaminathan; Dugar, Sundeep

    2012-10-01

    Global pharmaceutical companies face an increasingly harsh environment for their primary business of selling medicines. They have to contend with a spiraling decline in the productivity of their R&D programs that is guaranteed to severely diminish their growth prospects. Outsourcing of drug discovery activities to low-cost locations is a growing response to this crisis. However, the upsides to outsourcing are capped by the failure of global pharmaceutical companies to take advantage of the full range of possibilities that this model provides. Companies that radically rethink and transform the way they conduct R&D, such as seeking the benefits of low-cost locations in India and China will be the ones that thrive in this environment. In this article we present our views on how the outsourcing model in drug discovery should go beyond increasing the efficiency of existing drug discovery processes to a fundamental rethink and re-engineering of these processes. Copyright © 2012. Published by Elsevier Ltd.

  17. Emerging nondestructive inspection methods for aging aircraft

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Beattie, A; Dahlke, L; Gieske, J

    This report identifies and describes emerging nondestructive inspection (NDI) methods that can potentially be used to inspect commercial transport and commuter aircraft for structural damage. The nine categories of emerging NDI techniques are: acoustic emission, x-ray computed tomography, backscatter radiation, reverse geometry x-ray, advanced electromagnetics, including magnetooptic imaging and advanced eddy current techniques, coherent optics, advanced ultrasonics, advanced visual, and infrared thermography. The physical principles, generalized performance characteristics, and typical applications associated with each method are described. In addition, aircraft inspection applications are discussed along with the associated technical considerations. Finally, the status of each technique is presented, with amore » discussion on when it may be available for use in actual aircraft maintenance programs. It should be noted that this is a companion document to DOT/FAA/CT-91/5, Current Nondestructive Inspection Methods for Aging Aircraft.« less

  18. Classification of Aircraft Maneuvers for Fault Detection

    NASA Technical Reports Server (NTRS)

    Oza, Nikunj; Tumer, Irem Y.; Tumer, Kagan; Huff, Edward M.; Koga, Dennis (Technical Monitor)

    2002-01-01

    Automated fault detection is an increasingly important problem in aircraft maintenance and operation. Standard methods of fault detection assume the availability of either data produced during all possible faulty operation modes or a clearly-defined means to determine whether the data provide a reasonable match to known examples of proper operation. In the domain of fault detection in aircraft, the first assumption is unreasonable and the second is difficult to determine. We envision a system for online fault detection in aircraft, one part of which is a classifier that predicts the maneuver being performed by the aircraft as a function of vibration data and other available data. To develop such a system, we use flight data collected under a controlled test environment, subject to many sources of variability. We explain where our classifier fits into the envisioned fault detection system as well as experiments showing the promise of this classification subsystem.

  19. Flight control electronics reliability/maintenance study

    NASA Technical Reports Server (NTRS)

    Dade, W. W.; Edwards, R. H.; Katt, G. T.; Mcclellan, K. L.; Shomber, H. A.

    1977-01-01

    Collection and analysis of data are reported that concern the reliability and maintenance experience of flight control system electronics currently in use on passenger carrying jet aircraft. Two airlines B-747 airplane fleets were analyzed to assess the component reliability, system functional reliability, and achieved availability of the CAT II configuration flight control system. Also assessed were the costs generated by this system in the categories of spare equipment, schedule irregularity, and line and shop maintenance. The results indicate that although there is a marked difference in the geographic location and route pattern between the airlines studied, there is a close similarity in the reliability and the maintenance costs associated with the flight control electronics.

  20. We have just begun to create efficient transport aircraft

    NASA Technical Reports Server (NTRS)

    Maglieri, D. J.; Dollyhigh, S. M.

    1982-01-01

    Factors affecting the cost-effectiveness and economics of the air transportation industry are reviewed. The delivery of more fuel-efficient aircraft and eventual total replacement in the 1990's by fleets of advanced aircraft are seen to offset rising fuel costs. Better airport operations are perceived to eliminate fuel-costly delays due to overcrowded runways, lack of available carriers, and maintenance of aircraft in holding patterns. Noise reduction research will lower the lawsuit costs from noise pollution, and the introduction of advanced turbofans for long, short, and medium range flights, advanced commuter planes, and advanced SSTs offering projected 50% increases in current aircraft efficiencies are seen to be limited only by the airlines' ability to provide purchase financing, rather than by a lack of available new technology.

  1. The Second Joint NASA/FAA/DoD Conference on Aging Aircraft. Part 2

    NASA Technical Reports Server (NTRS)

    Harris, Charles E. (Editor)

    1999-01-01

    The purpose of the Conference was to bring together world leaders in aviation safety research, aircraft design and manufacturing, fleet operation and aviation maintenance to disseminate information on current practices and advanced technologies that will assure the continued airworthiness of the aging aircraft in the military and commercial fleets. The Conference included reviews of current industry practices, assessments of future technology requirements, and status of aviation safety research. The Conference provided an opportunity for interactions among the key personnel in the research and technology development community, the original equipment manufacturers, commercial airline operators, military fleet operators, aviation maintenance, and aircraft certification and regulatory authorities. Conference participation was unrestricted and open to the international aviation community. Appendix B contains the name and addresses of the 623 participants in the Conference.

  2. 75 FR 52482 - Airworthiness Directives; PILATUS Aircraft Ltd. Model PC-7 Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-26

    ..., check the airplane maintenance records to determine if the left and/or right aileron outboard bearing... an entry is found during the airplane maintenance records check required in paragraph (f)(1) of this...-0849; Directorate Identifier 2010-CE-043-AD] RIN 2120-AA64 Airworthiness Directives; PILATUS Aircraft...

  3. Invited Reaction: Outsourcing Relationships between Firms and their Training Providers--The Role of Trust

    ERIC Educational Resources Information Center

    Leimbach, Michael P.

    2005-01-01

    Outsourcing in the training and development industry has been steadily increasing and shows no indication of slowing (Surgue & Kim, 2004). Gainey and Klaas's study shines light on the role of interfirm trust in effective outsourcing relationships. This reaction addresses a methodological question of the effect of the rating target on the results,…

  4. Analysis of Maintenance Service Contracts for Dump Trucks Used in Mining Industry with Simulation Approach

    NASA Astrophysics Data System (ADS)

    Dymasius, A.; Wangsaputra, R.; Iskandar, B. P.

    2016-02-01

    A mining company needs high availability of dump trucks used to haul mining materials. As a result, an effective maintenance action is required to keep the dump trucks in a good condition and hence reducing failure and downtime of the dump trucks. To carry out maintenance in-house requires a high intensive maintenance facility and high skilled maintenance specialists. Often, outsourcing maintenance is an economic option for the company. An external agent takes a proactive action with offering some maintenance contract options to the owner. The decision problem for the owner is to decide the best option and for the agent is to determine the optimal price for each option offered. A non-cooperative game-theory is used to formulate the decision problems for the owner and the agent. We consider that failure pattern of each truck follows a non-homogeneous Poisson process (NHPP) and a queueing theory with multiple servers is used to estimate the downtime. As it involves high complexity to model downtime using a queueing theory, then in this paper we use a simulation method. Furthermore, we conduct experiment to seek for the best number of maintenance facilities (servers) which minimises maintenance and penalty costs incurred to the agent.

  5. Outsourcing in Higher Education: An Empirical Examination

    ERIC Educational Resources Information Center

    Gupta, Atul; Herath, S. Kanthi; Mikouiza, Nathalie C.

    2005-01-01

    Purpose: To measure the degree of implementation and satisfaction level with the outsourcing initiatives from higher education institutions. Design/methodology/approach: Uses a survey questionnaire to measure the levels of satisfaction with the institutions' services and the questionnaire was based on six factors that are deemed significant in…

  6. Acoustic outsourcing: New employment possibilities for the specialists

    NASA Astrophysics Data System (ADS)

    Perez, Patricia; Rios, Heriberto; Andrade, Armando; Ramirez, Mario

    2002-11-01

    The need for companies to be more competitive has led them to resort to training, external consultantship, continuous improvement programs, but with the aim of achieving maximum productivity, the big companies go even further: they are opting to focus on their high-priority activities, leaving some nonstrategic functions in the hands of third parties (organizations or individuals). Acoustic outsourcing presents immense business opportunities for the specialists in this area when offering services or completing a production process that the company carries out in an internal way but that is not its main function or activity. Outsourcing contemplates a serious long term commitment between the two parties; a kind of strategic alliance, all with the purpose of increasing efficiency and the quality of the products that the company develops, besides solving acoustic problems related to the production stage. (To be presented in Spanish.)

  7. Comprehensive outsourcing biobanking facility to serve the international research community.

    PubMed

    Diaferia, Giuseppe R; Biunno, Ida; DeBlasio, Pasquale

    2011-06-01

    The validity of results from biomarker studies using archived specimens depends on the integrity of the specimens and the manner in which they are collected, processed, and stored. The management of a huge amount of biomaterial generated from research studies and clinical trials is becoming a very demanding task and many organizations are facing the choice between in-house storage and processing and outsourcing some activities. Storage and logistic functions are the prime targets for outsourcing, because to sustain these critical assets organizations must have the expertise, the dedicated qualified personnel, the proper quality control programs, and available resources to fulfill the mandatory requirements to maintain the integrity of the samples. External biobanks are dedicated and certified infrastructures (ISO, GMP, etc.) that apply efficient logistic and shipping activities, use validated standard operating procedures, install appropriate monitoring back-up systems, and, most of all, have room for expansion. Thus, the choice between in-house biobanking and outsourcing cannot be exclusively based on a financial decision; it must also consider (i) type of collection/project, (ii) logistic complexity (number and locations of collection sites), (iii) safety requirements, (iv) functional expertise, and (v) business priorities.

  8. [Outsourcing: theory and practice at a clinical hospital in Szczecin exemplified by medical waste transport and treatment service].

    PubMed

    Kotlega, Dariusz; Nowacki, Przemysław; Lewiński, Dariusz; Chmurowicz, Ryszard; Ciećwiez, Sylwester

    2011-01-01

    Outsourcing proves to be a useful tool in the difficult process of improving the financial result of hospitals. Outsourcing means separation of some functions and services in one entity and their transfer to another. The aim of this study was to analyze the use of outsourcing at the Second Independent Public University Hospital of the Pomeranian Medical University (SPSK 2 PUM) in Szczecin. We studied the transport and treatment of medical waste. Outsourcing of waste treatment services led to financial savings. The cost of treatment of one kilogram of waste by an external company was PLN 2.53. The same service provided by the hospital would cost approximately PLN 7 per kilogram. Appropriate attention should be paid to the quality of services. It seems useful to have appropriate tools for quality control and monitoring. SPSK 2 PUM can serve as a good example of effective use of outsourcing.

  9. Clinical operations generation next… The age of technology and outsourcing

    PubMed Central

    Temkar, Priya

    2015-01-01

    Huge cost pressures and the need to drive faster approvals has driven a technology transformation in the clinical trial (CT) industry. The CT industry is thus leveraging mobile data, cloud computing, social media, robotic automation, and electronic source to drive efficiencies in a big way. Outsourcing of clinical operations support services to technology companies with a clinical edge is gaining tremendous importance. This paper provides an overview of current technology trends, applicable Food and Drug Administration (FDA) guidelines, basic challenges that the pharma industry is facing in trying to implement such changes and its shift towards outsourcing these services to enable it to focus on site operations. PMID:26623386

  10. Clinical operations generation next… The age of technology and outsourcing.

    PubMed

    Temkar, Priya

    2015-01-01

    Huge cost pressures and the need to drive faster approvals has driven a technology transformation in the clinical trial (CT) industry. The CT industry is thus leveraging mobile data, cloud computing, social media, robotic automation, and electronic source to drive efficiencies in a big way. Outsourcing of clinical operations support services to technology companies with a clinical edge is gaining tremendous importance. This paper provides an overview of current technology trends, applicable Food and Drug Administration (FDA) guidelines, basic challenges that the pharma industry is facing in trying to implement such changes and its shift towards outsourcing these services to enable it to focus on site operations.

  11. Work-Life Balance in an Outsourcing Environment

    ERIC Educational Resources Information Center

    Wiltshire, Dervent

    2013-01-01

    Empirical evidence has found an increase in work-life conflicts within outsourced environments. It is important to address the increase in conflict to reduce negative effects on businesses. Guided by the theoretical frameworks of the spillover, conflict management, and resource dependency theories, the purpose of the study was to examine how…

  12. Advanced U.S. military aircraft battery systems

    NASA Astrophysics Data System (ADS)

    Flake, Richard A.; Eskra, Michael D.

    1990-04-01

    While most USAF aircraft currently use vented Ni-Cd for dc electrical power and emergency power, as well as the powering of lights and instruments prior to engine starting, these batteries have high maintenance requirements, low reliability, and no built-in testing capability with which to check battery health prior to flight. The USAF Wright R&D Center accordingly initiated its Advanced Maintenance-Free NiCd Battery System development program in 1986, in order to develop a sealed Ni-Cd battery which would remain maintenance-free over a period of three years. Attention is being given to a high power bipolar battery design in which there are no individual cell cases or cell interconnects.

  13. 14 CFR 21.245 - Maintenance of eligibility.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Maintenance of eligibility. 21.245 Section 21.245 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT... requirements for issue of the authorization or shall notify the Administrator within 48 hours of any change...

  14. 14 CFR 21.245 - Maintenance of eligibility.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Maintenance of eligibility. 21.245 Section 21.245 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT... requirements for issue of the authorization or shall notify the Administrator within 48 hours of any change...

  15. International outsourcing of medical research by high-income countries: changes from 1995 to 2005.

    PubMed

    Belforti, Raquel K; Wall, Michal Sarah; Lindenauer, Peter K; Pekow, Penelope S; Rothberg, Michael B

    2010-02-01

    Medical research outsourcing provides a financial benefit to those conducting research and financial incentives to the developing countries hosting the research. Little is known about how frequently outsourcing occurs or the type of research that is outsourced. To document changes in medical research outsourcing over a 10-year period, we conducted a cross-sectional comparison of 3 medical journals: Lancet, The New England Journal of Medicine, and JAMA: The Journal of the American Medical Association in the last 6 months of 1995 and 2005. The main outcome measure was the 10-year change in proportion of studies including patients from low-income countries. We reviewed 598 articles. During the 10-year period, the proportion of first authors from low-income countries increased from 3% to 6% (P = 0.21), whereas studies with participants from low-income countries increased from 8% to 22% (P = < 0.001). In 2005, compared with studies conducted exclusively in high-income countries, those including participants from low-income countries were more likely to be randomized trials (55% vs 35%, P = 0.004), to study medications (65% vs 34%, P < 0.001), to be funded by pharmaceutical companies (33% vs 21%, P = 0.05), and to involve pediatric populations (29% vs 8%, P < 0.001). Outsourcing of medical research seems to be increasing. Additional studies are required to know if subjects from low-income countries are being adequately protected.

  16. Insourcing and Outsourcing for U.S. Department of Defense IT Projects: A Model

    DTIC Science & Technology

    2011-01-01

    positioning or reduced force readiness. This paper provides an introduction to the insourcing and outsourcing dilemma in today’s fiscally challenged ...force readiness. This paper provides an introduction to the insourcing and outsourcing dilemma in today?s fiscally challenged environment. It discusses...could risk loss to its global competitive posture, which in turn could impact the ability of the U.S. to defend itself by hampering national security

  17. Optimizing Maintenance Manpower for USMC F/A-18 Squadrons

    DTIC Science & Technology

    2016-06-01

    experience level, with the requirement of keeping a standard number of aircraft operationally ready. MVP results show areas of deficit, either manpower ...MAINTENANCE MANPOWER FOR USMC F/A-18 SQUADRONS by Kevin J. Goodwin June 2016 Thesis Co-Advisors: W. Matthew Carlyle Robert F. Dell Second...REPORT TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE OPTIMIZING MAINTENANCE MANPOWER FOR USMC F/A-18 SQUADRONS 5. FUNDING NUMBERS 6

  18. 77 FR 71087 - Airworthiness Directives; Sikorsky Aircraft Corporation (Sikorsky) Model Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-29

    ... by making the following pen and ink changes to the Airworthiness Limitations of the maintenance.... (g) Alternative Methods of Compliance (AMOC) (1) The Manager, Boston Aircraft Certification Office...

  19. Outsourcing and Insourcing of Information Services: A Case Study of Corporate and Government Libraries in Victoria.

    ERIC Educational Resources Information Center

    Lakey, Kathleen

    1994-01-01

    A survey of 92 corporate and government libraries in Victoria, Australia, reveals that 64.8% were restructured over the last 5 years. Reasons for outsourcing; services being outsourced; the impact of budgets; and the use of service fees are examined. (AEF)

  20. The Effects of Risk and Size of Company on Business Performance in Information Technology Outsourcing

    ERIC Educational Resources Information Center

    Balogun, Shereef Adewale

    2013-01-01

    Information technology (IT) outsourcing is a practical way to transfer information technology by industries of different firms. The problem occurs when companies outsource services to domestic and international data centers as network security issues arise. This leads to competition between companies causing the size of the company to become more…

  1. Outsourcing: A Descriptive Study of the Outsourcing of Non-Educational Services in the Bergen and Passaic County Public Schools

    ERIC Educational Resources Information Center

    Pecora, Albert J.

    2012-01-01

    Due to a diminishing level of available funds, school leaders are faced with difficult decisions associated with reducing budget expenditures. The only way to prevent losing more programs and services is to reduce spending. An area which is quickly gaining popularity in reducing expenditures is outsourcing. Many schools have turned to outside…

  2. 75 FR 66655 - Airworthiness Directives; PILATUS Aircraft Ltd. Model PC-7 Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-29

    ... December 3, 2010 (the effective date of this AD), check the airplane maintenance records to determine if... of the airplane. Do this check following paragraph 3.A. of Pilatus Aircraft Ltd. PC-7 Service... maintenance records check required in paragraph (f)(1) of this AD or it is unclear whether or not the left and...

  3. A Study of Vehicle Structural Layouts in Post-WWII Aircraft

    NASA Technical Reports Server (NTRS)

    Sensmeier, Mark D.; Samareh, Jamshid A.

    2004-01-01

    In this paper, results of a study of structural layouts of post-WWII aircraft are presented. This study was undertaken to provide the background information necessary to determine typical layouts, design practices, and industry trends in aircraft structural design. Design decisions are often predicated not on performance-related criteria, but rather on such factors as manufacturability, maintenance access, and of course cost. For this reason, a thorough understanding of current best practices in the industry is required as an input for the design optimization process. To determine these best practices and industry trends, a large number of aircraft structural cutaway illustrations were analyzed for five different aircraft categories (commercial transport jets, business jets, combat jet aircraft, single engine propeller aircraft, and twin-engine propeller aircraft). Several aspects of wing design and fuselage design characteristics are presented here for the commercial transport and combat aircraft categories. A great deal of commonality was observed for transport structure designs over a range of eras and manufacturers. A much higher degree of variability in structural designs was observed for the combat aircraft, though some discernable trends were observed as well.

  4. Hardening surveillance illumination using aircraft antennas

    NASA Astrophysics Data System (ADS)

    Donohoe, J. P.; Taylor, C. D.

    1990-06-01

    Aircraft maintenance depots and main operating bases need to be able to perform quick checks of the electromagnetic pulse (EMP) hardness of their systems without removing them from service for any length of time. Preliminary tests have shown that the onboard HF antennas of the EMP Test-Bed Aircraft (EMPTAC) may be capable of providing the HF excitation required to effectively monitor the EMP hardness of aircraft systems. The surface current and charge distributions on the EMPTAC which result from swept frequency excitation of the HF radio antennas are computed over a range of 0.5 to 100 MHz using various antenna drive configurations. The computational analysis is performed by using two separate frequency-dependent techniques: the method-of-moments technique and the physical optics approximation. These calculations are then compared with the excitation provided from an overhead plane wave and with measured data from EMPTAC tests.

  5. A survey of rural hospitals' perspectives on health information technology outsourcing.

    PubMed

    Johnson, Nicholas; Murphy, Alison; McNeese, Nathan; Reddy, Madhu; Purao, Sandeep

    2013-01-01

    A survey of rural hospitals was conducted in the spring of 2012 to better understand their perspectives on health information technology (HIT) outsourcing and the role that hospital-to-hospital HIT partnerships (HHPs) can play as an outsourcing mechanism. The survey sought to understand how HHPs might be leveraged for HIT implementation, as well as the challenges with forming them. The results suggest that HHPs have the potential to address rural hospitals' slow rate of HIT adoption, but there are also challenges to creating these partnerships. These issues, as well as avenues for further research, are then discussed.

  6. A Survey of Rural Hospitals’ Perspectives on Health Information Technology Outsourcing

    PubMed Central

    Johnson, Nicholas; Murphy, Alison; McNeese, Nathan; Reddy, Madhu; Purao, Sandeep

    2013-01-01

    A survey of rural hospitals was conducted in the spring of 2012 to better understand their perspectives on health information technology (HIT) outsourcing and the role that hospital-to-hospital HIT partnerships (HHPs) can play as an outsourcing mechanism. The survey sought to understand how HHPs might be leveraged for HIT implementation, as well as the challenges with forming them. The results suggest that HHPs have the potential to address rural hospitals’ slow rate of HIT adoption, but there are also challenges to creating these partnerships. These issues, as well as avenues for further research, are then discussed. PMID:24551373

  7. Aviation Maintenance Technology. Airframe. A204. Aircraft Welding. Instructor Material.

    ERIC Educational Resources Information Center

    Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This teacher's guide is designed to aid teachers in leading students through a module on aircraft welding on airframes. The module contains four units that cover the following topics: (1) gas welding and cutting; (2) brazing and soldering; (3) shielded metal arc welding; and (4) gas tungsten arc welding. Each unit follows a standardized format…

  8. Structural health monitoring methodology for aircraft condition-based maintenance

    NASA Astrophysics Data System (ADS)

    Saniger, Jordi; Reithler, Livier; Guedra-Degeorges, Didier; Takeda, Nobuo; Dupuis, Jean Pierre

    2001-06-01

    Reducing maintenance costs while keeping a constant level of safety is a major issue for Air Forces and airlines. The long term perspective is to implement condition based maintenance to guarantee a constant safety level while decreasing maintenance costs. On this purpose, the development of a generalized Structural Health Monitoring System (SHMS) is needed. The objective of such a system is to localize the damages and to assess their severity, with enough accuracy to allow low cost corrective actions. The present paper describes a SHMS based on acoustic emission technology. This choice was driven by its reliability and wide use in the aerospace industry. The described SHMS uses a new learning methodology which relies on the generation of artificial acoustic emission events on the structure and an acoustic emission sensor network. The calibrated acoustic emission events picked up by the sensors constitute the knowledge set that the system relies on. With this methodology, the anisotropy of composite structures is taken into account, thus avoiding the major cause of errors of classical localization methods. Moreover, it is adaptive to different structures as it does not rely on any particular model but on measured data. The acquired data is processed and the event's location and corrected amplitude are computed. The methodology has been demonstrated and experimental tests on elementary samples presented a degree of accuracy of 1cm.

  9. 76 FR 31457 - Airworthiness Directives; Diamond Aircraft Industries GmbH Model DA 42 Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-01

    ... Airworthiness Directives; Diamond Aircraft Industries GmbH Model DA 42 Airplanes AGENCY: Federal Aviation... reportedly found on DA 42 Main Landing Gear (MLG) Damper-to-Trailing Arm joints during standard maintenance... DA 42 Main Landing Gear (MLG) Damper-to-Trailing Arm joints during standard maintenance. Depending on...

  10. Revision of certification standards for aviation maintenance personnel

    NASA Technical Reports Server (NTRS)

    Vipond, Leslie K.

    1992-01-01

    Part 65, Subparts D and E, of the Federal Aviation Regulations (FAR) identify the certification requirements for aviation mechanics and aviation repairmen. The training, experience, privileges, ratings, recordkeeping, and currency requirements for aviation maintenance personnel are also addressed by those parts of the FAR. The recent emergence of the aging fleet problem and the introduction of new technologies, aircraft, engines, and aeronautical products has caused certain portions of these rules to become obsolete. Further, international political arrangements, such as bilateral airworthiness and maintenance agreements, International Civil Aviation Organization (ICAO) standards, certain international agreements for maintenance personnel training, and mechanic certificate reciprocity, have all impacted on the current regulatory policy.

  11. Aging Aircraft Transparencies: AN Italian Air Force Fleet Case History

    NASA Astrophysics Data System (ADS)

    Caucci, D.; Aiello, L.; Bagnoli, F.; Bernabei, M.

    2008-08-01

    Aircraft acrylic transparencies are structural components that must withstand flight and ground loads. Crazing occurrence, known as Environmental Stress Cracking (ESC), causes their substitution during aircraft maintenance operations. This form of aging is mainly a physical phenomenon due to the interaction of transparencies base material with an active liquid and leads craze formation at lower stress that would be required in air. In this paper, an extensive phenomenon of network ESC occurred on transparencies of many aircrafts operating in the same fleet was investigated. Cover application while parking was found to be the critical aspect in crazing appearance, thus acting as physical shield for condensed water and heat transferring.

  12. Privatisation and outsourcing in wartime: the humanitarian challenges.

    PubMed

    Carbonnier, Gilles

    2006-12-01

    The tendency today to privatise many activities hitherto considered the exclusive preserve of the state has given rise to sharp debate. The specific nature of humanitarian emergencies elucidates in particularly stark contrast some of the main challenges connected to the privatisation and outsourcing of essential public services, such as the provision of drinking water and health care. Privatising the realms of defence and security, which are at the very core of state prerogative, raises several legal and humanitarian concerns. This article focuses on the roles and responsibilities of the various parties involved in armed conflicts, especially those of private companies engaged in security, intelligence and interrogation work, and in the provision of water supply and health services. It highlights the need for humanitarian and development actors to grasp better the potential risks and opportunities related to privatisation and outsourcing with a view to supplying effective protection and assistance to communities affected by war.

  13. Criteria for the evaluation of a cloud-based hospital information system outsourcing provider.

    PubMed

    Low, Chinyao; Hsueh Chen, Ya

    2012-12-01

    As cloud computing technology has proliferated rapidly worldwide, there has been a trend toward adopting cloud-based hospital information systems (CHISs). This study examines the critical criteria for selecting the CHISs outsourcing provider. The fuzzy Delphi method (FDM) is used to evaluate the primary indicator collected from 188 useable responses at a working hospital in Taiwan. Moreover, the fuzzy analytic hierarchy process (FAHP) is employed to calculate the weights of these criteria and establish a fuzzy multi-criteria model of CHISs outsourcing provider selection from 42 experts. The results indicate that the five most critical criteria related to CHISs outsourcing provider selection are (1) system function, (2) service quality, (3) integration, (4) professionalism, and (5) economics. This study may contribute to understanding how cloud-based hospital systems can reinforce content design and offer a way to compete in the field by developing more appropriate systems.

  14. Training and the Commitment of Outsourced Information Technologies' Workers: Psychological Contract Fulfillment as a Mediator

    ERIC Educational Resources Information Center

    Fontinha, Rita; Chambel, Maria José; De Cuyper, Nele

    2014-01-01

    Outsourced workers in information technologies (IT) generally have high skills and a high value on the job market. Their IT outsourcing organizations are likely to provide them with training, in the first place for skill development, but perhaps also as a way to bind the workers to them. This can be understood along the role of the psychological…

  15. Getting Outside Help: How Trust Problems Explain Household Differences in Domestic Outsourcing in the Netherlands

    ERIC Educational Resources Information Center

    de Ruijter, Esther; van der Lippe, Tanja

    2009-01-01

    This article examines the influence of trust problems on the use of domestic outsourcing by couples from a gender perspective. The authors argue that trust problems matter in outsourcing decisions, because an outsider enters the privacy of the household and takes over tasks of special value. Analyses of data from a survey among 740 Dutch couples…

  16. Private and Efficient Query Processing on Outsourced Genomic Databases.

    PubMed

    Ghasemi, Reza; Al Aziz, Md Momin; Mohammed, Noman; Dehkordi, Massoud Hadian; Jiang, Xiaoqian

    2017-09-01

    Applications of genomic studies are spreading rapidly in many domains of science and technology such as healthcare, biomedical research, direct-to-consumer services, and legal and forensic. However, there are a number of obstacles that make it hard to access and process a big genomic database for these applications. First, sequencing genomic sequence is a time consuming and expensive process. Second, it requires large-scale computation and storage systems to process genomic sequences. Third, genomic databases are often owned by different organizations, and thus, not available for public usage. Cloud computing paradigm can be leveraged to facilitate the creation and sharing of big genomic databases for these applications. Genomic data owners can outsource their databases in a centralized cloud server to ease the access of their databases. However, data owners are reluctant to adopt this model, as it requires outsourcing the data to an untrusted cloud service provider that may cause data breaches. In this paper, we propose a privacy-preserving model for outsourcing genomic data to a cloud. The proposed model enables query processing while providing privacy protection of genomic databases. Privacy of the individuals is guaranteed by permuting and adding fake genomic records in the database. These techniques allow cloud to evaluate count and top-k queries securely and efficiently. Experimental results demonstrate that a count and a top-k query over 40 Single Nucleotide Polymorphisms (SNPs) in a database of 20 000 records takes around 100 and 150 s, respectively.

  17. Private and Efficient Query Processing on Outsourced Genomic Databases

    PubMed Central

    Ghasemi, Reza; Al Aziz, Momin; Mohammed, Noman; Dehkordi, Massoud Hadian; Jiang, Xiaoqian

    2017-01-01

    Applications of genomic studies are spreading rapidly in many domains of science and technology such as healthcare, biomedical research, direct-to-consumer services, and legal and forensic. However, there are a number of obstacles that make it hard to access and process a big genomic database for these applications. First, sequencing genomic sequence is a time-consuming and expensive process. Second, it requires large-scale computation and storage systems to processes genomic sequences. Third, genomic databases are often owned by different organizations and thus not available for public usage. Cloud computing paradigm can be leveraged to facilitate the creation and sharing of big genomic databases for these applications. Genomic data owners can outsource their databases in a centralized cloud server to ease the access of their databases. However, data owners are reluctant to adopt this model, as it requires outsourcing the data to an untrusted cloud service provider that may cause data breaches. In this paper, we propose a privacy-preserving model for outsourcing genomic data to a cloud. The proposed model enables query processing while providing privacy protection of genomic databases. Privacy of the individuals is guaranteed by permuting and adding fake genomic records in the database. These techniques allow cloud to evaluate count and top-k queries securely and efficiently. Experimental results demonstrate that a count and a top-k query over 40 SNPs in a database of 20,000 records takes around 100 and 150 seconds, respectively. PMID:27834660

  18. The NASA Earth Research-2 (ER-2) Aircraft: A Flying Laboratory for Earth Science Studies

    NASA Technical Reports Server (NTRS)

    Navarro, Robert

    2007-01-01

    The National Aeronautics and Space Administration Dryden Flight Research Center, Edwards, California, has two Lockheed Martin Corporation (Bethesda, Maryland) Earth Research-2 (ER2) aircraft that serve as high-altitude and long-range flying laboratories. The ER-2 aircraft has been successfully utilized to conduct scientific studies of stratospheric and tropospheric chemistry, land-use mapping, disaster assessment, preliminary testing and calibration and validation of satellite sensors. The research missions for the ER-2 aircraft are planned, implemented, and managed by the Dryden Flight Research Center Science Mission Directorate. Maintenance and instrument payload integration is conducted by Dryden personnel. The ER-2 aircraft provides experimenters with a wide array of payload accommodations areas with suitable environment control with required electrical and mechanical interfaces. Missions may be flown out of Dryden or from remote bases worldwide, according to research requirements. The NASA ER-2 aircraft is utilized by a variety of customers, including U.S. Government agencies, civilian organizations, universities, and state governments. The combination of the ER-2 aircraft s range, endurance, altitude, payload power, payload volume and payload weight capabilities complemented by a trained maintenance and operations team provides an excellent and unique platform system to the science community and other customers.

  19. Reliability and Maintainability model (RAM) user and maintenance manual. Part 2

    NASA Technical Reports Server (NTRS)

    Ebeling, Charles E.

    1995-01-01

    This report documents the procedures for utilizing and maintaining the Reliability and Maintainability Model (RAM) developed by the University of Dayton for the NASA Langley Research Center (LaRC). The RAM model predicts reliability and maintainability (R&M) parameters for conceptual space vehicles using parametric relationships between vehicle design and performance characteristics and subsystem mean time between maintenance actions (MTBM) and manhours per maintenance action (MH/MA). These parametric relationships were developed using aircraft R&M data from over thirty different military aircraft of all types. This report describes the general methodology used within the model, the execution and computational sequence, the input screens and data, the output displays and reports, and study analyses and procedures. A source listing is provided.

  20. Generalized Operations Simulation Environment for Aircraft Maintenance Training

    DTIC Science & Technology

    2004-04-01

    Operations Simulation Environment ( GOSE ) project is a collaborative effort between AETC and AFRL to develop common, cost-effective, generalized VR training...maintenance training domain since it provided an opportunity to build on the VEST architecture. Development of GOSE involves re-engineering VEST as a scalable...modular, immersive VR training system comprised of PC-based hardware and software. GOSE initiatives include: (a) formalize training needs across

  1. Effect of broadened-specification fuels on aircraft engines and fuel systems

    NASA Technical Reports Server (NTRS)

    Rudey, R. A.

    1979-01-01

    A wide variety of studies on the potential effects of broadened-specification fuels on future aircraft engines and fuel systems are summarized. The compositions and characteristics of aircraft fuels that may be derived from current and future crude-oil sources are described, and the most critical properties that may effect aircraft engines and fuel systems are identified and discussed. The problems that are most likely to be encountered because of changes in selected fuel properties are explored; and the related effects on engine performance, component durability and maintenance, and aircraft fuel-system performance are examined. The ability of current technology to accept possible future fuel specification changes is assessed and selected technological advances that can reduce the severity of the potential problems are illustrated.

  2. Effect of broadened-specification fuels on aircraft engines and fuel systems

    NASA Technical Reports Server (NTRS)

    Rudey, R. A.

    1979-01-01

    A wide variety of studies on the potential effects of broadened-specification fuels on future aircraft engines and fuel systems are summarized. The compositions and characteristics of aircraft fuels that may be derived from current and future crude-oil sources are described, and the most critical properties that may affect aircraft engines and fuel systems are identified and discussed. The problems that are most likely to be encountered because of changes in selected fuel properties are described; and the related effects on engine performance, component durability and maintenance, and aircraft fuel-system performance are discussed. The ability of current technology to accept possible future fuel-specification changes is discussed, and selected technological advances that can reduce the severity of the potential problems are illustrated.

  3. Outsourcing and "dismantling" of steady jobs at hospitals.

    PubMed

    Souza, Helton Saragor de; Mendes, Áquilas Nogueira

    2016-04-01

    To relate hospitals' organizational structure as the core of a web of outsourced services and flexible employment bonds among healthcare professionals in the context of finance capitalism, analyzing work arrangements based mainly on the type of employment bond. Qualitative research through ethnography, interviews, data analysis, and case studies. The case studies were concentrated in 3 hospitals located in the São Paulo metropolitan region under different management types: public administration; outsourced administration via a healthcare social organization (HSO); and private administration. This study highlights a trend in outsourcing, dismantling of steady jobs, and shaping working relations asymmetrically in terms of healthcare professions. These aspects are characteristic of contemporary capitalism and post-Fordist work organization. In this context, the state under sponsorship cripples the very existence of an effective human resources policy, creating a favorable environment for outsourcing and flexibility of employment bonds among healthcare workers. Relacionar a estrutura organizativa dos hospitais como núcleo de uma rede de serviços subcontratados e a flexibilização dos vínculos contratuais dos profissionais de saúde no contexto de capitalismo financeirizado, analisando os regimes de trabalho condicionados centralmente pelo vínculo empregatício. Pesquisa qualitativa através de etnografia, realização de entrevistas, análise de dados e utilização de estudo de caso. Os estudos de caso concentram-se em três hospitais localizados Região Metropolitana de São Paulo com gestões distintas: administração pública; administração terceirizada para Organização Social de Saúde (OSS); e administração privada. Destacamos a tendência da terceirização, do desmonte do emprego estável e a conformação de relações trabalhistas assimétricas para as profissões em saúde. Esses aspectos são característicos do período do capitalismo

  4. Outsourcing the Portal: Another Branch in the Decision Tree.

    ERIC Educational Resources Information Center

    McMahon, Tim

    2000-01-01

    Discussion of the management of information resources in organizations focuses on the use of portal technologies to update intranet capabilities. Considers application outsourcing decisions, reviews benefits (including reducing costs) as well as concerns, and describes application service providers (ASPs). (LRW)

  5. The Outsourcing of Classroom Instruction in Higher Education

    ERIC Educational Resources Information Center

    Schibik, Timothy; Harrington, Charles

    2004-01-01

    Many constituencies external to higher education have begun promoting greater accountability. This view advocates a closer focus on the bottom line and that universities should utilise a more business-like model. One major outgrowth of this paradigm shift has been the seemingly recent emergence of outsourcing in higher education. Higher education…

  6. A Simple Estimation Method for Aggregate Government Outsourcing

    ERIC Educational Resources Information Center

    Minicucci, Stephen; Donahue, John D.

    2004-01-01

    The scholarly and popular debate on the delegation to the private sector of governmental tasks rests on an inadequate empirical foundation, as no systematic data are collected on direct versus indirect service delivery. We offer a simple method for approximating levels of service outsourcing, based on relatively straightforward combinations of and…

  7. Personnel Performance Assessment in Information Systems Outsourcing Environments

    ERIC Educational Resources Information Center

    Casado-Lumbreras, Cristina; Soto-Acosta, Pedro; Colomo-Palacios, Ricardo; de Pablos, Patricia Ordonez

    2011-01-01

    Purpose: The aim of this paper is to present a tool which uses semantic technologies for personnel performance and workplace learning assessment in outsourced information technology environments. Design/methodology/approach: The paper presents the tool from a technical perspective and introduces a use case that depicts the main features related to…

  8. 75 FR 26885 - Airworthiness Directives; Sikorsky Aircraft Corporation Model S-76A, B, and C Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-13

    ... states that this ``check'' should be performed in accordance with the maintenance manual. Because we have... Airworthiness Directives; Sikorsky Aircraft Corporation Model S- 76A, B, and C Helicopters AGENCY: Federal... directive (AD) for Sikorsky Aircraft Corporation (Sikorsky) Model S-76A, B, and C helicopters that requires...

  9. Successful Information Technology Outsourcing: A Case Study on How a U.S.-Based Company Achieves Success

    ERIC Educational Resources Information Center

    Daluisio, Stephen C.

    2014-01-01

    In the late 1980s, the Eastman Kodak company initiated what would become one of the biggest trends in information technology (IT): outsourcing. IT outsourcing (ITO) allows a company to focus on the services that will differentiate it from its competitors and farm out nondifferentiating services. ITO has grown from the initial landmark effort at…

  10. The Development and Deployment of a Maintenance Operations Safety Survey.

    PubMed

    Langer, Marie; Braithwaite, Graham R

    2016-11-01

    Based on the line operations safety audit (LOSA), two studies were conducted to develop and deploy an equivalent tool for aircraft maintenance: the maintenance operations safety survey (MOSS). Safety in aircraft maintenance is currently measured reactively, based on the number of audit findings, reportable events, incidents, or accidents. Proactive safety tools designed for monitoring routine operations, such as flight data monitoring and LOSA, have been developed predominantly for flight operations. In Study 1, development of MOSS, 12 test peer-to-peer observations were collected to investigate the practicalities of this approach. In Study 2, deployment of MOSS, seven expert observers collected 56 peer-to-peer observations of line maintenance checks at four stations. Narrative data were coded and analyzed according to the threat and error management (TEM) framework. In Study 1, a line check was identified as a suitable unit of observation. Communication and third-party data management were the key factors in gaining maintainer trust. Study 2 identified that on average, maintainers experienced 7.8 threats (operational complexities) and committed 2.5 errors per observation. The majority of threats and errors were inconsequential. Links between specific threats and errors leading to 36 undesired states were established. This research demonstrates that observations of routine maintenance operations are feasible. TEM-based results highlight successful management strategies that maintainers employ on a day-to-day basis. MOSS is a novel approach for safety data collection and analysis. It helps practitioners understand the nature of maintenance errors, promote an informed culture, and support safety management systems in the maintenance domain. © 2016, Human Factors and Ergonomics Society.

  11. The Development and Deployment of a Maintenance Operations Safety Survey

    PubMed Central

    Langer, Marie; Braithwaite, Graham R.

    2016-01-01

    Objective: Based on the line operations safety audit (LOSA), two studies were conducted to develop and deploy an equivalent tool for aircraft maintenance: the maintenance operations safety survey (MOSS). Background: Safety in aircraft maintenance is currently measured reactively, based on the number of audit findings, reportable events, incidents, or accidents. Proactive safety tools designed for monitoring routine operations, such as flight data monitoring and LOSA, have been developed predominantly for flight operations. Method: In Study 1, development of MOSS, 12 test peer-to-peer observations were collected to investigate the practicalities of this approach. In Study 2, deployment of MOSS, seven expert observers collected 56 peer-to-peer observations of line maintenance checks at four stations. Narrative data were coded and analyzed according to the threat and error management (TEM) framework. Results: In Study 1, a line check was identified as a suitable unit of observation. Communication and third-party data management were the key factors in gaining maintainer trust. Study 2 identified that on average, maintainers experienced 7.8 threats (operational complexities) and committed 2.5 errors per observation. The majority of threats and errors were inconsequential. Links between specific threats and errors leading to 36 undesired states were established. Conclusion: This research demonstrates that observations of routine maintenance operations are feasible. TEM-based results highlight successful management strategies that maintainers employ on a day-to-day basis. Application: MOSS is a novel approach for safety data collection and analysis. It helps practitioners understand the nature of maintenance errors, promote an informed culture, and support safety management systems in the maintenance domain. PMID:27411354

  12. A Decision Model for Merging Base Operations: Outsourcing Pest Management on Joint Base Anacostia-Bolling

    DTIC Science & Technology

    2011-11-30

    OH: South- Western Cengage Learning. Mankiw , N. G. (2006). Principles of economics (4th ed.). Mason, OH: Thompson South- Western. Private...When the choice to in-source or outsource an installation function or service requirement exists, in these challenging economic times, it is now more...decision uncertainties. When the choice to in-source or outsource an installation function or service requirement exists, in these challenging economic

  13. Resource management in cardiovascular engineering: is outsourcing the solution?

    PubMed

    Feyrer, Richard; Weyand, Michael; Kunzmann, Udo

    2005-09-01

    In recent years, modern medicine has changed considerably. At maximum care centers, in particular, the use of state-of-the-art medical equipment has become an essential part of patient care. HoWever, using such high-tech products also means a considerable burden on the financial resources available, because additional financing is rare. Consequently, there is a need for approaches that allow the use of state-of-the-art equipment without straining the budget unduly. The question now is whether economic strategies that have long since been established in other industries, e.g., the outsourcing of certain services, represent a potential solution for the economic problems of modern clinics. The fundamentals of outsourcing and its pros and cons are outlined and discussed, taking cardiovascular perfusion as an example, a cost-intensive field of heart surgery that is responsible for attending to heart-lung machines, artificial hearts and circulatory support systems.

  14. A New Curriculum: Energy Outsourcing Brings Cost and Efficiency Benefits.

    ERIC Educational Resources Information Center

    Dickerman, Robert N.

    2002-01-01

    Considers the value of colleges and universities upgrading their energy infrastructure and using outsourcing energy management functions to save money and gain greater control of energy operations without substantial investments in staff and resources. (GR)

  15. Informed maintenance for next generation space transportation systems

    NASA Astrophysics Data System (ADS)

    Fox, Jack J.

    2001-02-01

    Perhaps the most substantial single obstacle to progress of space exploration and utilization of space for human benefit is the safety & reliability and the inherent cost of launching to, and returning from, space. The primary influence in the high costs of current launch systems (the same is true for commercial and military aircraft and most other reusable systems) is the operations, maintenance and infrastructure portion of the program's total life cycle costs. Reusable Launch Vehicle (RLV) maintenance and design have traditionally been two separate engineering disciplines with often conflicting objectives-maximizing ease of maintenance versus optimizing performance, size and cost. Testability analysis, an element of Informed Maintenance (IM), has been an ad hoc, manual effort, in which maintenance engineers attempt to identify an efficient method of troubleshooting for the given product, with little or no control over product design. Therefore, testability deficiencies in the design cannot be rectified. It is now widely recognized that IM must be engineered into the product at the design stage itself, so that an optimal compromise is achieved between system maintainability and performance. The elements of IM include testability analysis, diagnostics/prognostics, automated maintenance scheduling, automated logistics coordination, paperless documentation and data mining. IM derives its heritage from complimentary NASA science, space and aeronautic enterprises such as the on-board autonomous Remote Agent Architecture recently flown on NASA's Deep Space 1 Probe as well as commercial industries that employ quick turnaround operations. Commercial technologies and processes supporting NASA's IM initiatives include condition based maintenance technologies from Boeing's Commercial 777 Aircraft and Lockheed-Martin's F-22 Fighter, automotive computer diagnostics and autonomous controllers that enable 100,000 mile maintenance free operations, and locomotive monitoring

  16. Informed maintenance for next generation reusable launch systems

    NASA Astrophysics Data System (ADS)

    Fox, Jack J.; Gormley, Thomas J.

    2001-03-01

    Perhaps the most substantial single obstacle to progress of space exploration and utilization of space for human benefit is the safety & reliability and the inherent cost of launching to, and returning from, space. The primary influence in the high costs of current launch systems (the same is true for commercial and military aircraft and most other reusable systems) is the operations, maintenance and infrastructure portion of the program's total life cycle costs. Reusable Launch Vehicle (RLV) maintenance and design have traditionally been two separate engineering disciplines with often conflicting objectives - maximizing ease of maintenance versus optimizing performance, size and cost. Testability analysis, an element of Informed Maintenance (IM), has been an ad hoc, manual effort, in which maintenance engineers attempt to identify an efficient method of troubleshooting for the given product, with little or no control over product design. Therefore, testability deficiencies in the design cannot be rectified. It is now widely recognized that IM must be engineered into the product at the design stage itself, so that an optimal compromise is achieved between system maintainability and performance. The elements of IM include testability analysis, diagnostics/prognostics, automated maintenance scheduling, automated logistics coordination, paperless documentation and data mining. IM derives its heritage from complimentary NASA science, space and aeronautic enterprises such as the on-board autonomous Remote Agent Architecture recently flown on NASA's Deep Space 1 Probe as well as commercial industries that employ quick turnaround operations. Commercial technologies and processes supporting NASA's IM initiatives include condition based maintenance technologies from Boeing's Commercial 777 Aircraft and Lockheed-Martin's F-22 Fighter, automotive computer diagnostics and autonomous controllers that enable 100,000 mile maintenance free operations, and locomotive monitoring

  17. Operational Interventions to Maintenance Error

    NASA Technical Reports Server (NTRS)

    Kanki, Barbara G.; Walter, Diane; Dulchinos, VIcki

    1997-01-01

    A significant proportion of aviation accidents and incidents are known to be tied to human error. However, research of flight operational errors has shown that so-called pilot error often involves a variety of human factors issues and not a simple lack of individual technical skills. In aircraft maintenance operations, there is similar concern that maintenance errors which may lead to incidents and accidents are related to a large variety of human factors issues. Although maintenance error data and research are limited, industry initiatives involving human factors training in maintenance have become increasingly accepted as one type of maintenance error intervention. Conscientious efforts have been made in re-inventing the team7 concept for maintenance operations and in tailoring programs to fit the needs of technical opeRAtions. Nevertheless, there remains a dual challenge: 1) to develop human factors interventions which are directly supported by reliable human error data, and 2) to integrate human factors concepts into the procedures and practices of everyday technical tasks. In this paper, we describe several varieties of human factors interventions and focus on two specific alternatives which target problems related to procedures and practices; namely, 1) structured on-the-job training and 2) procedure re-design. We hope to demonstrate that the key to leveraging the impact of these solutions comes from focused interventions; that is, interventions which are derived from a clear understanding of specific maintenance errors, their operational context and human factors components.

  18. Outsourcing an Effective Postdischarge Call Program

    PubMed Central

    Meek, Kevin L.; Williams, Paula; Unterschuetz, Caryn J.

    2018-01-01

    To improve patient satisfaction ratings and decrease readmissions, many organizations utilize internal staff to complete postdischarge calls to recently released patients. Developing, implementing, monitoring, and sustaining an effective call program can be challenging and have eluded some of the renowned medical centers in the country. Using collaboration with an outsourced vendor to bring state-of-the-art call technology and staffed with specially trained callers, health systems can achieve elevated levels of engagement and satisfaction for their patients postdischarge. PMID:29494453

  19. Aging Aircraft Fleets: Structural and Other Subsystem Aspects (le Vieillissement des flottes d’avions militaires : aspects structures et autres sous-systemes)

    DTIC Science & Technology

    2001-03-01

    Science and Technology” – Vol. 7, Plenum Press (New York, 1980), 53-175. 7-1 Human Factors in Aircraft Inspection Colin G. Drury State University of...Page intentionnellement blanche 15-1 Human Factors in Aircraft Maintenance Colin G. Drury State University of New York at Buffalo Department of...c) changing mission requirements, (d) the specter of runaway maintenance costs , (e) concern about safety, (f) impairment of fleet readiness and (g

  20. Eclipse program C-141A aircraft

    NASA Technical Reports Server (NTRS)

    1997-01-01

    This photograph shows the Air Force C-141A that was used in the Eclipse project as a tow vehicle. In 1997 and 1998, the Dryden Flight Research Center at Edwards, California, supported and hosted a Kelly Space & Technology, Inc. project called Eclipse, which sought to demonstrate the feasibility of a reusable tow-launch vehicle concept. The project goal was to successfully tow, inflight, a modified QF-106 delta-wing aircraft with an Air Force C-141A transport aircraft. This would demonstrate the possibility of towing and launching an actual launch vehicle from behind a tow plane. Dryden was the responsible test organization and had flight safety responsibility for the Eclipse project. Dryden provided engineering, instrumentation, simulation, modification, maintenance, range support, and research pilots for the test program. The Air Force Flight Test Center (AFFTC), Edwards, California, supplied the C-141A transport aircraft and crew and configured the aircraft as needed for the tests. The AFFTC also provided the concept and detail design and analysis as well as hardware for the tow system and QF-106 modifications. Dryden performed the modifications to convert the QF-106 drone into the piloted EXD-01 (Eclipse eXperimental Demonstrator-01) experimental aircraft. Kelly Space & Technology hoped to use the results gleaned from the tow test in developing a series of low-cost, reusable launch vehicles. These tests demonstrated the validity of towing a delta-wing aircraft having high wind loading, validated the tow simulation model, and demonstrated various operational procedures, such as ground processing of in-flight maneuvers and emergency abort scenarios.

  1. 14 CFR Appendix A to Part 91 - Category II Operations: Manual, Instruments, Equipment, and Maintenance

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... authorization for the type aircraft checked. (3) A schedule that provides for the performance of bench checks..., Equipment, and Maintenance A Appendix A to Part 91 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... Maintenance 1. Category II Manual (a) Application for approval. An applicant for approval of a Category II...

  2. 14 CFR Appendix A to Part 91 - Category II Operations: Manual, Instruments, Equipment, and Maintenance

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... authorization for the type aircraft checked. (3) A schedule that provides for the performance of bench checks..., Equipment, and Maintenance A Appendix A to Part 91 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... Maintenance 1. Category II Manual (a) Application for approval. An applicant for approval of a Category II...

  3. 14 CFR Appendix A to Part 91 - Category II Operations: Manual, Instruments, Equipment, and Maintenance

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... authorization for the type aircraft checked. (3) A schedule that provides for the performance of bench checks..., Equipment, and Maintenance A Appendix A to Part 91 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... Maintenance 1. Category II Manual (a) Application for approval. An applicant for approval of a Category II...

  4. 14 CFR Appendix A to Part 91 - Category II Operations: Manual, Instruments, Equipment, and Maintenance

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... authorization for the type aircraft checked. (3) A schedule that provides for the performance of bench checks..., Equipment, and Maintenance A Appendix A to Part 91 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... Maintenance 1. Category II Manual (a) Application for approval. An applicant for approval of a Category II...

  5. 14 CFR Appendix A to Part 91 - Category II Operations: Manual, Instruments, Equipment, and Maintenance

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... authorization for the type aircraft checked. (3) A schedule that provides for the performance of bench checks..., Equipment, and Maintenance A Appendix A to Part 91 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... Maintenance 1. Category II Manual (a) Application for approval. An applicant for approval of a Category II...

  6. Using virtual reality technology for aircraft visual inspection training: presence and comparison studies.

    PubMed

    Vora, Jeenal; Nair, Santosh; Gramopadhye, Anand K; Duchowski, Andrew T; Melloy, Brian J; Kanki, Barbara

    2002-11-01

    The aircraft maintenance industry is a complex system consisting of several interrelated human and machine components. Recognizing this, the Federal Aviation Administration (FAA) has pursued human factors related research. In the maintenance arena the research has focused on the aircraft inspection process and the aircraft inspector. Training has been identified as the primary intervention strategy to improve the quality and reliability of aircraft inspection. If training is to be successful, it is critical that we provide aircraft inspectors with appropriate training tools and environment. In response to this need, the paper outlines the development of a virtual reality (VR) system for aircraft inspection training. VR has generated much excitement but little formal proof that it is useful. However, since VR interfaces are difficult and expensive to build, the computer graphics community needs to be able to predict which applications will benefit from VR. To address this important issue, this research measured the degree of immersion and presence felt by subjects in a virtual environment simulator. Specifically, it conducted two controlled studies using the VR system developed for visual inspection task of an aft-cargo bay at the VR Lab of Clemson University. Beyond assembling the visual inspection virtual environment, a significant goal of this project was to explore subjective presence as it affects task performance. The results of this study indicated that the system scored high on the issues related to the degree of presence felt by the subjects. As a next logical step, this study, then, compared VR to an existing PC-based aircraft inspection simulator. The results showed that the VR system was better and preferred over the PC-based training tool.

  7. Interface concerns of ejector integration in V/STOL aircraft

    NASA Technical Reports Server (NTRS)

    Lowry, R. B.

    1979-01-01

    A number of areas which have in the past contributed to weight, complexity, and thrust losses in the ejector-powered V/STOL vehicle were identified. Most of these interfaces taken singly do not represent a severe compromise to the vehicle; however, the bottom line is that the sum of compromises and the subsequent effects on performance, flight operations and maintenance have rendered the ejector V/STOL aircraft unattractive. In addition to some of the unique ejector/aircraft integration problems, the vehicle by virtue of having a V/STOL capability, is compromised in other areas. To be successful and acceptable, the advantages must outweight the disadvantages and simplicity with minimum penalties must be the rule. It is concluded that more emphasis must be placed on the ejector/aircraft interface for the concept to be successful.

  8. Threats to the Sustainability of the Outsourced Call Center Industry in the Philippines: Implications for Language Policy

    ERIC Educational Resources Information Center

    Friginal, Eric

    2009-01-01

    This study overviews current threats to the sustainability of the outsourced call center industry in the Philippines and discusses implications for macro and micro language policies given the use of English in this cross-cultural interactional context. This study also summarizes the present state of outsourced call centers in the Philippines, and…

  9. Applying Lean to the F-15 Maintenance Process for the Royal Saudi Air Force

    DTIC Science & Technology

    2014-03-01

    Royal Saudi Air Force. The research focuses on improving the F-15 maintenance process in the Royal Saudi Air Force’s Maintenance Squadrons. The F-15...and on the aircraft age condition, the researcher concludes it is time to get rid of some obstacles and use new management techniques to resolve the...processes? Research Focus This research is focusing on the Royal Saudi Air Force F-15 maintenance process. Because of the time and

  10. Impact of future fuel properties on aircraft engines and fuel systems

    NASA Technical Reports Server (NTRS)

    Rudey, R. A.; Grobman, J. S.

    1978-01-01

    From current projections of the availability of high-quality petroleum crude oils, it is becoming increasingly apparent that the specifications for hydrocarbon jet fuels may have to be modified. The problems that are most likely to be encountered as a result of these modifications relate to engine performance, component durability and maintenance, and aircraft fuel-system performance. The effect on engine performance will be associated with changes in specific fuel consumption, ignition at relight limits, at exhaust emissions. Durability and maintenance will be affected by increases in combustor liner temperatures, carbon deposition, gum formation in fuel nozzles, and erosion and corrosion of turbine blades and vanes. Aircraft fuel-system performance will be affected by increased deposits in fuel-system heat exchangers and changes in the pumpability and flowability of the fuel. The severity of the potential problems is described in terms of the fuel characteristics most likely to change in the future. Recent data that evaluate the ability of current-technology aircraft to accept fuel specification changes are presented, and selected technological advances that can reduce the severity of the problems are described and discussed.

  11. Feasibility study of a 270V dc flat cable aircraft electrical power distributed system

    NASA Astrophysics Data System (ADS)

    Musga, M. J.; Rinehart, R. J.

    1982-01-01

    This report documents the efforts of a one man-year feasibility study to evaluate the usage of flat conductors in place of conventional round wires for a 270 volt direct current aircraft power distribution system. This study consisted of designing electrically equivalent power distribution harnesses in flat conductor configurations for a currently operational military aircraft. Harness designs were established for installation in aircraft airframes which are: (1) All metal, or (2) All composite, or (3) a mixture of both. Flat cables have greater surface areas for heat transfer allowing higher current densities and therefore lighter weight conductors, than with round wires. Flat cables are less susceptible to electromagnetic effects. However, these positive factors are partially offset by installation and maintenance difficulties. This study concludes that the extent of these difficulties can be adequately limited with appropriate modification to present installation and maintenance practices. A comparative analysis of the flat and the round conductor power distribution harnesses was made for weight, cost, maintenance and reliability. The knowledge gained from the design and comparative analysis phases was used to generate design criteria for flat power cable harnesses and to identify and prioritize flat cable harness components and associated production tooling which require development.

  12. Flight demonstration of a self repairing flight control system in a NASA F-15 fighter aircraft

    NASA Technical Reports Server (NTRS)

    Urnes, James M.; Stewart, James; Eslinger, Robert

    1990-01-01

    Battle damage causing loss of control capability can compromise mission objectives and even result in aircraft loss. The Self Repairing Flight Control System (SRFCS) flight development program directly addresses this issue with a flight control system design that measures the damage and immediately refines the control system commands to preserve mission potential. The system diagnostics process detects in flight the type of faults that are difficult to isolate post flight, and thus cause excessive ground maintenance time and cost. The control systems of fighter aircraft have the control power and surface displacement to maneuver the aircraft in a very large flight envelope with a wide variation in airspeed and g maneuvering conditions, with surplus force capacity available from each control surface. Digital flight control processors are designed to include built-in status of the control system components, as well as sensor information on aircraft control maneuver commands and response. In the event of failure or loss of a control surface, the SRFCS utilizes this capability to reconfigure control commands to the remaining control surfaces, thus preserving maneuvering response. Correct post-flight repair is the key to low maintainability support costs and high aircraft mission readiness. The SRFCS utilizes the large data base available with digital flight control systems to diagnose faults. Built-in-test data and sensor data are used as inputs to an Onboard Expert System process to accurately identify failed components for post-flight maintenance action. This diagnostic technique has the advantage of functioning during flight, and so is especially useful in identifying intermittent faults that are present only during maneuver g loads or high hydraulic flow requirements. A flight system was developed to test the reconfiguration and onboard maintenance diagnostics concepts on a NASA F-15 fighter aircraft.

  13. Carrier Based Air Logistics Study: Maintenance Analysis.

    DTIC Science & Technology

    1982-01-01

    MONITORING AGENCY NAME & ADDRESS(If dIierent loan Controling 01116.) 1S. SECURITY CLASS. (of Od. report) gel Unclassified IS&. DECL ASSI IlCATION/ OOWNGRAOIN...Management System AECL Avionics Equipment Configuration List AIMD Aircraft Intermediate Maintenance Department ASO Aviation Supply Office ASW...implementation. Component-specific data, and indentured[2] relationships between components extracted from the Aviation Supply Office ( ASO ) weapon

  14. Air quality and ocular discomfort aboard commercial aircraft.

    PubMed

    Backman, H; Haghighat, F

    2000-10-01

    Aircraft cabin air quality has been a subject of recent public health interest. Aircraft environments are designed according to standards to ensure the comfort and well-being of the occupants. The upper and lower limits of humidity set by ASHRAE standards are based on the maintenance of acceptable thermal conditions established solely on comfort considerations, including thermal sensation, skin wetness, skin dryness, dry eyes and ocular discomfort. The purpose of this study is to investigate the influence of air (carbon dioxide level, relative humidity, and temperature) aboard commercial aircraft on ocular discomfort and dry eye of aircraft personnel and passengers. Measurements of indoor air quality were performed in 15 different aircraft at different times and altitudes. Forty-two measurements of carbon dioxide, temperature, and humidity were performed with portable air samplers every 5 minutes. Passenger loads did not exceed 137 passengers. Thermal comfort rarely met ASHRAE standards. Low humidity levels and high carbon dioxide levels were found on the Airbus 320. The DC-9 had the highest humidity level and the Boeing-767 had the lowest carbon dioxide level. Air quality was poorest on the Airbus 320 aircraft. This poor level of air quality may cause intolerance to contact lenses, dry eyes, and may be a health hazard to both passengers and crew members. Improved ventilation and aircraft cabin micro-environments need to be made for the health and comfort of the occupants.

  15. Securing SIFT: Privacy-preserving Outsourcing Computation of Feature Extractions Over Encrypted Image Data.

    PubMed

    Hu, Shengshan; Wang, Qian; Wang, Jingjun; Qin, Zhan; Ren, Kui

    2016-05-13

    Advances in cloud computing have greatly motivated data owners to outsource their huge amount of personal multimedia data and/or computationally expensive tasks onto the cloud by leveraging its abundant resources for cost saving and flexibility. Despite the tremendous benefits, the outsourced multimedia data and its originated applications may reveal the data owner's private information, such as the personal identity, locations or even financial profiles. This observation has recently aroused new research interest on privacy-preserving computations over outsourced multimedia data. In this paper, we propose an effective and practical privacy-preserving computation outsourcing protocol for the prevailing scale-invariant feature transform (SIFT) over massive encrypted image data. We first show that previous solutions to this problem have either efficiency/security or practicality issues, and none can well preserve the important characteristics of the original SIFT in terms of distinctiveness and robustness. We then present a new scheme design that achieves efficiency and security requirements simultaneously with the preservation of its key characteristics, by randomly splitting the original image data, designing two novel efficient protocols for secure multiplication and comparison, and carefully distributing the feature extraction computations onto two independent cloud servers. We both carefully analyze and extensively evaluate the security and effectiveness of our design. The results show that our solution is practically secure, outperforms the state-of-theart, and performs comparably to the original SIFT in terms of various characteristics, including rotation invariance, image scale invariance, robust matching across affine distortion, addition of noise and change in 3D viewpoint and illumination.

  16. SecSIFT: Privacy-preserving Outsourcing Computation of Feature Extractions Over Encrypted Image Data.

    PubMed

    Hu, Shengshan; Wang, Qian; Wang, Jingjun; Qin, Zhan; Ren, Kui

    2016-05-13

    Advances in cloud computing have greatly motivated data owners to outsource their huge amount of personal multimedia data and/or computationally expensive tasks onto the cloud by leveraging its abundant resources for cost saving and flexibility. Despite the tremendous benefits, the outsourced multimedia data and its originated applications may reveal the data owner's private information, such as the personal identity, locations or even financial profiles. This observation has recently aroused new research interest on privacy-preserving computations over outsourced multimedia data. In this paper, we propose an effective and practical privacy-preserving computation outsourcing protocol for the prevailing scale-invariant feature transform (SIFT) over massive encrypted image data. We first show that previous solutions to this problem have either efficiency/security or practicality issues, and none can well preserve the important characteristics of the original SIFT in terms of distinctiveness and robustness. We then present a new scheme design that achieves efficiency and security requirements simultaneously with the preservation of its key characteristics, by randomly splitting the original image data, designing two novel efficient protocols for secure multiplication and comparison, and carefully distributing the feature extraction computations onto two independent cloud servers. We both carefully analyze and extensively evaluate the security and effectiveness of our design. The results show that our solution is practically secure, outperforms the state-of-theart, and performs comparably to the original SIFT in terms of various characteristics, including rotation invariance, image scale invariance, robust matching across affine distortion, addition of noise and change in 3D viewpoint and illumination.

  17. Comparison of Requirements for Composite Structures for Aircraft and Space Applications

    NASA Technical Reports Server (NTRS)

    Raju, Ivatury S.; Elliot, Kenny B.; Hampton, Roy W.; Knight, Norman F., Jr.; Aggarwal, Pravin; Engelstad, Stephen P.; Chang, James B.

    2010-01-01

    In this report, the aircraft and space vehicle requirements for composite structures are compared. It is a valuable exercise to study composite structural design approaches used in the airframe industry and to adopt methodology that is applicable for space vehicles. The missions, environments, analysis methods, analysis validation approaches, testing programs, build quantities, inspection, and maintenance procedures used by the airframe industry, in general, are not transferable to spaceflight hardware. Therefore, while the application of composite design approaches from aircraft and other industries is appealing, many aspects cannot be directly utilized. Nevertheless, experiences and research for composite aircraft structures may be of use in unexpected arenas as space exploration technology develops, and so continued technology exchanges are encouraged.

  18. Eclipse program C-141A aircraft

    NASA Technical Reports Server (NTRS)

    1997-01-01

    This photograph shows the Air Force C-141A that was used in the Eclipse project as a tow vehicle. The project used a QF-106 interceptor aircraft to simulate a future orbiter, which would be towed to a high altitude and released to fire its own engines and carry a payload into space. In 1997 and 1998, the Dryden Flight Research Center at Edwards, California, supported and hosted a Kelly Space & Technology, Inc. project called Eclipse, which sought to demonstrate the feasibility of a reusable tow-launch vehicle concept. The project goal was to successfully tow, inflight, a modified QF-106 delta-wing aircraft with an Air Force C-141A transport aircraft. This would demonstrate the possibility of towing and launching an actual launch vehicle from behind a tow plane. Dryden was the responsible test organization and had flight safety responsibility for the Eclipse project. Dryden provided engineering, instrumentation, simulation, modification, maintenance, range support, and research pilots for the test program. The Air Force Flight Test Center (AFFTC), Edwards, California, supplied the C-141A transport aircraft and crew and configured the aircraft as needed for the tests. The AFFTC also provided the concept and detail design and analysis as well as hardware for the tow system and QF-106 modifications. Dryden performed the modifications to convert the QF-106 drone into the piloted EXD-01 (Eclipse eXperimental Demonstrator-01) experimental aircraft. Kelly Space & Technology hoped to use the results gleaned from the tow test in developing a series of low-cost, reusable launch vehicles. These tests demonstrated the validity of towing a delta-wing aircraft having high wing loading, validated the tow simulation model, and demonstrated various operational procedures, such as ground processing of in-flight maneuvers and emergency abort scenarios.

  19. Influences of reverse outsourcing on green technological progress from the perspective of a global supply chain.

    PubMed

    Wang, Shuhong; Song, Malin

    2017-10-01

    As a newly appeared trade mode in recent years, reverse outsourcing has made a great impact on traditional trade modes. This paper researched the influences of reverse outsourcing on green technological progress from the perspective of a global supply chain by using micro-data of enterprises. It worked out the rate of green technological progress from two innovative concepts: potential production technology and practical production technology. The empirical analysis results indicated that reverse outsourcing stimulates, and enterprise size and ownership type potentially affects, green technological progress. State-owned or foreign enterprises with high income levels would pay more attention to environmental protection, energy saving, and emission reduction, while small and micro enterprises with low incomes would choose to ignore environmental protection. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. Why Outsourcing Happens, and What To Do about It.

    ERIC Educational Resources Information Center

    White, Herbert S.

    2000-01-01

    Discusses the concept of outsourcing in libraries and suggests that it is done for the cosmetic appearance of fiscal economies. Highlights include the possibility of achieving better service quality, but at a higher cost; and the importance of keeping management informed about and aware of the value of library services. (LRW)

  1. The Effect of Functional Flow Diagrams on the Technical System Understanding of Apprentice Aircraft Maintenance Mechanics.

    ERIC Educational Resources Information Center

    Johnson, Scott D.; Satchwell, Richard E.

    A quasiexperimental study involved 18 male students enrolled in an aircraft systems course at the University of Illinois. The control group of 10 students studied 39 schematic diagrams of aircraft systems. The treatment group of eight students studied the same schematic diagrams plus conceptual diagrams of the systems. Otherwise, the instruction…

  2. Study of advanced rotary combustion engines for commuter aircraft

    NASA Technical Reports Server (NTRS)

    Berkowitz, M.; Jones, C.; Myers, D.

    1983-01-01

    Performance, weight, size, and maintenance data for advanced rotary aircraft engines suitable for comparative commuter aircraft system evaluation studies of alternate engine candidates are provided. These are turbocharged, turbocompounded, direct injected, stratified charge rotary engines. Hypothetical engines were defined (an RC4-74 at 895 kW and an RC6-87 at 1490 kW) based on the technologies and design approaches used in the highly advanced engine of a study of advanced general aviation rotary engines. The data covers the size range of shaft power from 597 kW (800 hp) to 1865 kW (2500 hp) and is in the form of drawings, tables, curves and written text. These include data on internal geometry and configuration, installation information, turbocharging and turbocompounding arrangements, design features and technologies, engine cooling, fuels, scaling for weight size BSFC and heat rejection for varying horsepower, engine operating and performance data, and TBO and maintenance requirements. The basic combustion system was developed and demonstrated; however the projected power densities and performance efficiencies require increases in engine internal pressures, thermal loading, and rotative speed.

  3. Eclipse program QF-106 aircraft in flight

    NASA Technical Reports Server (NTRS)

    1997-01-01

    This photo shows one of the QF-106s used in the Eclipse project in flight. In 1997 and 1998, the Dryden Flight Research Center at Edwards, California, supported and hosted a Kelly Space & Technology, Inc. project called Eclipse, which sought to demonstrate the feasibility of a reusable tow-launch vehicle concept. The project goal was to successfully tow, inflight, a modified QF-106 delta-wing aircraft with an Air Force C-141A transport aircraft. This would demonstrate the possibility of towing and launching an actual launch vehicle from behind a tow plane. Dryden was the responsible test organization and had flight safety responsibility for the Eclipse project. Dryden provided engineering, instrumentation, simulation, modification, maintenance, range support, and research pilots for the test program. The Air Force Flight Test Center (AFFTC), Edwards, California, supplied the C-141A transport aircraft and crew and configured the aircraft as needed for the tests. The AFFTC also provided the concept and detail design and analysis as well as hardware for the tow system and QF-106 modifications. Dryden performed the modifications to convert the QF-106 drone into the piloted EXD-01 (Eclipse eXperimental Demonstrator-01) experimental aircraft. Kelly Space & Technology hoped to use the results gleaned from the tow test in developing a series of low-cost, reusable launch vehicles. These tests demonstrated the validity of towing a delta-wing aircraft having high wing loading, validated the tow simulation model, and demonstrated various operational procedures, such as ground processing of in-flight maneuvers and emergency abort scenarios.

  4. Comparison of two different running models for the shock wave lithotripsy machine in Taipei City Hospital: self-support versus outsourcing cooperation.

    PubMed

    Huang, Chi-Yi; Chen, Shiou-Sheng; Chen, Li-Kuei

    2009-10-01

    To compare two different running models including self-support and outsourcing cooperation for the extracorporeal shock wave lithotripsy (SWL) machine in Taipei City Hospital, we made a retrospective study. Self-support means that the hospital has to buy an SWL machine and get all the payment from SWL. In outsourcing cooperation, the cooperative company provides an SWL machine and shares the payment with the hospital. Between January 2002 and December 2006, we used self-support for the SWL machine, and from January 2007 to December 2008, we used outsourcing cooperation. We used the method of full costing to calculate the cost of SWL, and the break-even point was the lowest number of treatment sessions of SWL to make balance of payments every month. Quality parameters including stone-free rate, retreatment rate, additional procedures and complication rate were evaluated. When outsourcing cooperation was used, there were significantly more treatment sessions of SWL every month than when utilizing self-support (36.3 +/- 5.1 vs. 48.1 +/- 8.4, P = 0.03). The cost of SWL for every treatment session was significantly higher using self-support than with outsourcing cooperation (25027.5 +/- 1789.8 NT$ vs. 21367.4 +/- 201.0 NT$). The break-even point was 28.3 (treatment sessions) for self-support, and 28.4 for outsourcing cooperation, when the hospital got 40% of the payment, which would decrease if the percentage increased. No significant differences were noticed for stone-free rate, retreatment rate, additional procedures and complication rate of SWL between the two running models. Besides, outsourcing cooperation had lower cost (every treatment session), but a greater number of treatment sessions of SWL every month than self-support.

  5. RTJ-303: Variable geometry, oblique wing supersonic aircraft

    NASA Technical Reports Server (NTRS)

    Antaran, Albert; Belete, Hailu; Dryzmkowski, Mark; Higgins, James; Klenk, Alan; Rienecker, Lisa

    1992-01-01

    This document is a preliminary design of a High Speed Civil Transport (HSCT) named the RTJ-303. It is a 300 passenger, Mach 1.6 transport with a range of 5000 nautical miles. It features four mixed-flow turbofan engines, variable geometry oblique wing, with conventional tail-aft control surfaces. The preliminary cost analysis for a production of 300 aircraft shows that flyaway cost would be 183 million dollars (1992) per aircraft. The aircraft uses standard jet fuel and requires no special materials to handle aerodynamic heating in flight because the stagnation temperatures are approximately 130 degrees Fahrenheit in the supersonic cruise condition. It should be stressed that this aircraft could be built with today's technology and does not rely on vague and uncertain assumptions of technology advances. Included in this report are sections discussing the details of the preliminary design sequence including the mission to be performed, operational and performance constraints, the aircraft configuration and the tradeoffs of the final choice, wing design, a detailed fuselage design, empennage design, sizing of tail geometry, and selection of control surfaces, a discussion on propulsion system/inlet choice and their position on the aircraft, landing gear design including a look at tire selection, tip-over criterion, pavement loading, and retraction kinematics, structures design including load determination, and materials selection, aircraft performance, a look at stability and handling qualities, systems layout including location of key components, operations requirements maintenance characteristics, a preliminary cost analysis, and conclusions made regarding the design, and recommendations for further study.

  6. Analysis of Intellectual Property Protection Issues in Offshore Outsourcing

    ERIC Educational Resources Information Center

    Singh, Satinder Pal

    2013-01-01

    Offshore outsourcing is a business strategy that involves contracting with a partner who can take over certain aspects of a company's business, such as information technology (IT) functions, in the interests of efficiency and cost savings. The purpose of this study was to analyze the intellectual property protection issues to achieve a better…

  7. Test results of smart aircraft fastener for KC-135 structural integrity

    NASA Astrophysics Data System (ADS)

    Schoess, Jeffrey N.; Seifert, Greg

    1998-07-01

    Hidden and inaccessible corrosion in aircraft structures is the number one logistics problem for the US Air Force, with an estimated maintenance cost in excess of $LR 1.0B per year in 1990-equivalent dollars. The Smart Aircraft Fastener Evaluation (SAFE) system was developed to provide early warning detection of corrosion-related symptoms in hidden locations of aircraft structures. The SAFE system incorporates an in situ measurement approach that measures and autonomously records several environmental conditions within a Hi-Lok aircraft fastener that could cause corrosion. The SAFE system integrates a miniature electrochemical microsensor array and a time-of-wetness sensor with an ultra low power 8-bit microcontroller and 4- Mbyte solid-state FLASH archival memory to measure evidence of active corrosion. A summary of the technical approach and a detailed analysis of the KC-135 lap joint test coupon results are presented.

  8. NASA Electric Aircraft Test Bed (NEAT) Development Plan - Design, Fabrication, Installation

    NASA Technical Reports Server (NTRS)

    Dyson, Rodger W.

    2016-01-01

    As large airline companies compete to reduce emissions, fuel, noise, and maintenance costs, it is expected that more of their aircraft systems will shift from using turbofan propulsion, pneumatic bleed power, and hydraulic actuation, to instead using electrical motor propulsion, generator power, and electrical actuation. This requires new flight-weight and flight-efficient powertrain components, fault tolerant power management, and electromagnetic interference mitigation technologies. Moreover, initial studies indicate some combination of ambient and cryogenic thermal management and relatively high bus voltages when compared to state of practice will be required to achieve a net system benefit. Developing all these powertrain technologies within a realistic aircraft architectural geometry and under realistic operational conditions requires a unique electric aircraft testbed. This report will summarize existing testbed capabilities located in the U.S. and details the development of a unique complementary testbed that industry and government can utilize to further mature electric aircraft technologies.

  9. Risk management for outsourcing biomedical waste disposal - using the failure mode and effects analysis.

    PubMed

    Liao, Ching-Jong; Ho, Chao Chung

    2014-07-01

    Using the failure mode and effects analysis, this study examined biomedical waste companies through risk assessment. Moreover, it evaluated the supervisors of biomedical waste units in hospitals, and factors relating to the outsourcing risk assessment of biomedical waste in hospitals by referring to waste disposal acts. An expert questionnaire survey was conducted on the personnel involved in waste disposal units in hospitals, in order to identify important factors relating to the outsourcing risk of biomedical waste in hospitals. This study calculated the risk priority number (RPN) and selected items with an RPN value higher than 80 for improvement. These items included "availability of freezing devices", "availability of containers for sharp items", "disposal frequency", "disposal volume", "disposal method", "vehicles meeting the regulations", and "declaration of three lists". This study also aimed to identify important selection factors of biomedical waste disposal companies by hospitals in terms of risk. These findings can serve as references for hospitals in the selection of outsourcing companies for biomedical waste disposal. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. XDS-I outsourcing proxy: ensuring confidentiality while preserving interoperability.

    PubMed

    Ribeiro, Luís S; Viana-Ferreira, Carlos; Oliveira, José Luís; Costa, Carlos

    2014-07-01

    The interoperability of services and the sharing of health data have been a continuous goal for health professionals, patients, institutions, and policy makers. However, several issues have been hindering this goal, such as incompatible implementations of standards (e.g., HL7, DICOM), multiple ontologies, and security constraints. Cross-enterprise document sharing (XDS) workflows were proposed by Integrating the Healthcare Enterprise (IHE) to address current limitations in exchanging clinical data among organizations. To ensure data protection, XDS actors must be placed in trustworthy domains, which are normally inside such institutions. However, due to rapidly growing IT requirements, the outsourcing of resources in the Cloud is becoming very appealing. This paper presents a software proxy that enables the outsourcing of XDS architectural parts while preserving the interoperability, confidentiality, and searchability of clinical information. A key component in our architecture is a new searchable encryption (SE) scheme-Posterior Playfair Searchable Encryption (PPSE)-which, besides keeping the same confidentiality levels of the stored data, hides the search patterns to the adversary, bringing improvements when compared to the remaining practical state-of-the-art SE schemes.

  11. Evaluation of Oregon Department of Transportation project delivery : outsourcing project delivery in state departments of transportation, literature review and DOT survey.

    DOT National Transportation Integrated Search

    2003-12-01

    This report summarizes a review of literature regarding outsourcing by Departments of Transportation (DOT), with particular emphasis on outsourcing of project delivery, and on performance measures for project delivery. The report also summarizes info...

  12. Analysis of EA-18G Growler Engine Maintenance at Naval Air Station Whidbey Island, WA

    DTIC Science & Technology

    2013-06-01

    maintenance. A. NAVAL AVIATION MAINTENANCE PROGRAM The aviation maintenance community considers the NAMP its bible . “The NAMP applies to all...will increase to 114, which is the total number of aircraft at the completion of the acquisition process in year 2018 (increasing by 12 per year...until 2018 where eight will complete the acquisition)  The cost of the F414-GE-400 engine is about 3.7 million dollars. B. CALCULATING THE ENGINE Aₒ

  13. Protecting Location Privacy for Outsourced Spatial Data in Cloud Storage

    PubMed Central

    Gui, Xiaolin; An, Jian; Zhao, Jianqiang; Zhang, Xuejun

    2014-01-01

    As cloud computing services and location-aware devices are fully developed, a large amount of spatial data needs to be outsourced to the cloud storage provider, so the research on privacy protection for outsourced spatial data gets increasing attention from academia and industry. As a kind of spatial transformation method, Hilbert curve is widely used to protect the location privacy for spatial data. But sufficient security analysis for standard Hilbert curve (SHC) is seldom proceeded. In this paper, we propose an index modification method for SHC (SHC∗) and a density-based space filling curve (DSC) to improve the security of SHC; they can partially violate the distance-preserving property of SHC, so as to achieve better security. We formally define the indistinguishability and attack model for measuring the privacy disclosure risk of spatial transformation methods. The evaluation results indicate that SHC∗ and DSC are more secure than SHC, and DSC achieves the best index generation performance. PMID:25097865

  14. Small molecule compound logistics outsourcing--going beyond the "thought experiment".

    PubMed

    Ramsay, Devon L; Kwasnoski, Joseph D; Caldwell, Gary W

    2012-01-01

    Increasing pressure on the pharmaceutical industry to reduce cost and focus internal resources on "high value" activities is driving a trend to outsource traditionally "in-house" drug discovery activities. Compound collections are typically viewed as drug discovery's "crown jewels"; however, in late 2007, Johnson & Johnson Pharmaceutical Research & Development (J PRD) took a bold step to move their entire North American compound inventory and processing capability to an external third party vendor. The authors discuss the combination model implemented, that of local compound logistics site support with an outsourced centralized processing center. Some of the lessons learned over the past five years were predictable while others were unexpected. The substantial cost savings, improved local service response and flexible platform to adjust to changing business needs resulted. Continued sustainable success relies heavily upon maintaining internal headcount dedicated to vendor management, an open collaboration approach and a solid information technology infrastructure with complete transparency and visibility.

  15. Protecting location privacy for outsourced spatial data in cloud storage.

    PubMed

    Tian, Feng; Gui, Xiaolin; An, Jian; Yang, Pan; Zhao, Jianqiang; Zhang, Xuejun

    2014-01-01

    As cloud computing services and location-aware devices are fully developed, a large amount of spatial data needs to be outsourced to the cloud storage provider, so the research on privacy protection for outsourced spatial data gets increasing attention from academia and industry. As a kind of spatial transformation method, Hilbert curve is widely used to protect the location privacy for spatial data. But sufficient security analysis for standard Hilbert curve (SHC) is seldom proceeded. In this paper, we propose an index modification method for SHC (SHC(∗)) and a density-based space filling curve (DSC) to improve the security of SHC; they can partially violate the distance-preserving property of SHC, so as to achieve better security. We formally define the indistinguishability and attack model for measuring the privacy disclosure risk of spatial transformation methods. The evaluation results indicate that SHC(∗) and DSC are more secure than SHC, and DSC achieves the best index generation performance.

  16. Collaboration versus outsourcing: the need to think outside the box.

    PubMed

    Robertson, Graeme M; Mayr, Lorenz M

    2011-12-01

    As has been widely reviewed elsewhere, the pharmaceutical industry is experiencing an 'innovation deficit' as evidenced by the decline in new chemical entity output. This decline, compounded by increased costs and regulatory requirements highlights the need to significantly revise strategic options across the drug-discovery spectrum. Within such revision(s), much of the focus has been on outsourcing to reduce, or at least contain, costs, but if the underlying predominance of 'closed collaborations' is not challenged to allow better use of combined knowledge and, thus, move towards a more genuine collaborative process then a 'numbers only' approach will not bring medium-to-long-term survival. There are many problems to confront in evolving new sustainable strategies, a real need to think differently exists and should to be cultivated. This article reviews current outsourcing and collaboration strategies to provide a perspective on how great knowledge sharing could help revise the drug-discovery process.

  17. A Routing Mechanism for Cloud Outsourcing of Medical Imaging Repositories.

    PubMed

    Godinho, Tiago Marques; Viana-Ferreira, Carlos; Bastião Silva, Luís A; Costa, Carlos

    2016-01-01

    Web-based technologies have been increasingly used in picture archive and communication systems (PACS), in services related to storage, distribution, and visualization of medical images. Nowadays, many healthcare institutions are outsourcing their repositories to the cloud. However, managing communications between multiple geo-distributed locations is still challenging due to the complexity of dealing with huge volumes of data and bandwidth requirements. Moreover, standard methodologies still do not take full advantage of outsourced archives, namely because their integration with other in-house solutions is troublesome. In order to improve the performance of distributed medical imaging networks, a smart routing mechanism was developed. This includes an innovative cache system based on splitting and dynamic management of digital imaging and communications in medicine objects. The proposed solution was successfully deployed in a regional PACS archive. The results obtained proved that it is better than conventional approaches, as it reduces remote access latency and also the required cache storage space.

  18. Impairment of color vision in aircraft maintenance workers.

    PubMed

    Guest, Maya; D'Este, Catherine; Attia, John; Boggess, May; Brown, Anthony; Tavener, Meredith; Gibson, Richard; Gardner, Ian; Harrex, Warren; Ross, James

    2011-10-01

    The purpose of the study was to examine possible persisting effects to color vision in a group from the Royal Australian Air Force who had exposure to formulations containing neurotoxins during F-111 fuel tank maintenance, relative to two contemporaneous comparison groups. Color vision was tested in 512 exposed personnel, 458 technical-trade comparisons, and 330 non-technical comparisons using the Ishihara test plates and the Lanthony D-15 Desaturated Color disk arrangement test. Participants were excluded if they failed the Ishihara test as this indicates congenital color blindness. From the Lanthony results, the type of color deficient vision (CDV) was diagnosed, and additionally, the Bowman's color confusion index (CCI) was calculated. Regression models were used to examine whether there was an association between color vision deficiencies and F-111 fuel tank maintenance, adjusting for possible confounders. The CCI ranged from 1 to 2.8 (median 1.2, quartiles 1.1, 1.4) in the 2,600 eyes tested. Forty five percent of all participants had blue-yellow CDV in at least one eye. Deficiencies of this nature are caused by environmental exposures. Logistic regression demonstrated statistically significant differences in CCI category in the exposed group versus technical group (odds ratio 1.7: 95% CI 1.3-2.0) and a blue-yellow confusion in the exposed group versus technical group (odds ratio 1.4: 95% CI 1.1-1.7). No differences were observed between the exposed group and the non-technical group. The results indicate reduced color discrimination among the exposed subjects compared to one of two control groups. The findings may be due to previous exposure to solvents among the air force personnel.

  19. Use of outsourced nurses in long-term acute care hospitals: outcomes and leadership preferences.

    PubMed

    Alvarez, M Raymond; Kerr, Bernard J; Burtner, Joan; Ledlow, Gerald; Fulton, Larry V

    2011-02-01

    When staffing effectiveness is not maintained over time, the likelihood of negative outcomes increases. This challenge is particularly problematic in long-term acute care hospitals (LTACHs) where use of outsourced temporary nurses is common when providing safe, sufficient care to medically complex patients who require longer hospital stays than normally would occur. To assess this issue, the authors discuss the outcomes of their survey of LTACH chief nursing officers that demonstrated LTACH quality indicators and overall patient satisfaction were within nationally accepted benchmarks even with higher levels of outsourced nurses used in this post-acute care setting.

  20. The air transportation industry birthplace of reliability-centered maintenance

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Matteson, T.D.

    1996-08-01

    The 1980s and 1970s provided a timely opportunity for examining and radically changing the process called {open_quotes}preventive maintenance{close_quotes} as it is applied to the aircraft used for scheduled air transportation. The Federal Aviation Administration and four major airlines, United, American, Pan American and Trans World, were the {open_quotes}principals{close_quotes} in that process. While United`s work with the FAA on the Boeing 737 had opened the door a crack, the Boeing 747 presented a major opportunity to radically improve the process for maintenance program design. That program was guided by the results of United`s analyses of failure data from operations of severalmore » fleets, each larger than 100 aircraft, and the concurrent experience of American, Pan American and Trans World. That knowledge provided the insights necessary to support an entirely different approach to maintenance program design. As a result, while United`s existing maintenance program required scheduled overhaul of 339 items on each DC-8, it required overhaul of only 8 items on the B-7471 Although the initial thrust of that work focused on components of active systems, there was concurrent work focused on items whose principal function was to carry the loads associated with operations. That program focused on the classification of structurally-significant items and their classification as {open_quotes}safe life{close_quotes} or {open_quotes}damage tolerant{close_quote} to determine what periodic replacements or repeated inspections were required. That work came to the attention of the Department of Defense which supported preparation of the book-length report by F. Stanley Nowlan and Howard F. Heap at United Airlines entitled {open_quote}Reliability-Centered maintenance{close_quotes}.« less

  1. The Demand for Single Engine Piston Aircraft,

    DTIC Science & Technology

    1987-08-01

    Other promising variables included Student Pilots and - Maintenance and overhaul costs. None of the national economic " variables tested was effective ...publicity and are presumed to exist 1everywhere. *O 2-11 . ., Today’s deregulated airline envi ronrrient has had opposing effects on the use of small aircraft...delivered. Foreign producers have learned to compete effectively in these segments of the U.S. marketplace. one can assume they could do the same in

  2. Case study. When outsourcing goes awry ... seven experts discuss how the outsourcing crisis could have been avoided.

    PubMed

    Peisch, R

    1995-01-01

    Grant Newman, chief executive officer of Regional Medical Center, expected the worst from the meeting that was scheduled to begin in less than an hour. The anesthesiologists were at the end of their rope, and the hospital's surgeons and obstetricians were pretty riled up, too. Eighteen months earlier, Newman had made the decision to outsource RMC's anesthesia services, and he had signed a contract with Physicians Development Services, a contract management company. As is typical in these arrangements, the anesthesiologists would be independent contractors with PDS while PDS would be under contract with RMC. Legally, therefore, there would be no agreement of any sort between the anesthesiologists and the hospital where they worked. At the time, PDS seemed a good fit. It had a reputation for providing high-quality physicians both on a permanent basis and for temporary assignments. Unfortunately, however, PDS was undercapitalized and chronically mismanaged. PDS's paychecks to the anesthesiologists began arriving late and then bounced several times over a three-month period. In addition, the contract between the anesthesiologists and PDS had expired three months earlier, and the anesthesiologists were providing services without a contract. Newman knew that he had no legal right to interfere with the contract between PDS and the anesthesia group unless PDS breached the contract with RMC. But Newman felt that the future viability of the hospital would be seriously compromised if he allowed an exodus to occur even for a single day. What can Newman do to resolve this conflict? Seven experts consider how the hospital's outsourcing crisis could have been avoided.

  3. Initial flight qualification and operational maintenance of X-29A flight software

    NASA Technical Reports Server (NTRS)

    Earls, Michael R.; Sitz, Joel R.

    1989-01-01

    A discussion is presented of some significant aspects of the initial flight qualification and operational maintenance of the flight control system softward for the X-29A technology demonstrator. Flight qualification and maintenance of complex, embedded flight control system software poses unique problems. The X-29A technology demonstrator aircraft has a digital flight control system which incorporates functions generally considered too complex for analog systems. Organizational responsibilities, software assurance issues, tools, and facilities are discussed.

  4. Outsourcing your medical practice call center: how to choose a vendor to ensure regulatory compliance.

    PubMed

    Johnson, Bill

    2014-01-01

    Medical practices receive hundreds if not thousands of calls every week from patients, payers, pharmacies, and others. Outsourcing call centers can be a smart move to improve efficiency, lower costs, improve customer care, ensure proper payer management, and ensure regulatory compliance. This article discusses how to know when it's time to move to an outsourced call center, the benefits of making the move, how to choose the right call center, and how to make the transition. It also provides tips on how to manage the call center to ensure the objectives are being met.

  5. Efficient and secure outsourcing of genomic data storage.

    PubMed

    Sousa, João Sá; Lefebvre, Cédric; Huang, Zhicong; Raisaro, Jean Louis; Aguilar-Melchor, Carlos; Killijian, Marc-Olivier; Hubaux, Jean-Pierre

    2017-07-26

    Cloud computing is becoming the preferred solution for efficiently dealing with the increasing amount of genomic data. Yet, outsourcing storage and processing sensitive information, such as genomic data, comes with important concerns related to privacy and security. This calls for new sophisticated techniques that ensure data protection from untrusted cloud providers and that still enable researchers to obtain useful information. We present a novel privacy-preserving algorithm for fully outsourcing the storage of large genomic data files to a public cloud and enabling researchers to efficiently search for variants of interest. In order to protect data and query confidentiality from possible leakage, our solution exploits optimal encoding for genomic variants and combines it with homomorphic encryption and private information retrieval. Our proposed algorithm is implemented in C++ and was evaluated on real data as part of the 2016 iDash Genome Privacy-Protection Challenge. Results show that our solution outperforms the state-of-the-art solutions and enables researchers to search over millions of encrypted variants in a few seconds. As opposed to prior beliefs that sophisticated privacy-enhancing technologies (PETs) are unpractical for real operational settings, our solution demonstrates that, in the case of genomic data, PETs are very efficient enablers.

  6. Students' Perception of IS Academic Programs, IS Careers, and Outsourcing

    ERIC Educational Resources Information Center

    Martz, Ben; Cata, Teuta

    2008-01-01

    The authors compared the perceptions of information systems (IS) students with those of IS practitioners regarding IS careers, the practice of outsourcing, and academic programs. Results indicate that students and practitioners appreciate the integration of real-life practice in academic programs and that the general perception of IS careers is…

  7. Successful outsourcing: improving quality of life through integrated support services.

    PubMed

    Bates, Jason; Sharratt, Martin; King, John

    2014-01-01

    This article examines the way that non-clinical support services are provided in healthcare settings through outsourcing partnerships. The integrated support services model and benefits to patient experience and safety as well as organizational efficiency and effectiveness are explored through an examination of services at a busy urban community hospital.

  8. Multi-Channel, Constant-Current Power Source for Aircraft Applications

    DTIC Science & Technology

    2017-03-01

    Special considerations impacting this design were minimizing volume, maintaining system power quality, and providing electrical fault protection...applications. Electrical loads, such as lighting, de-icing heaters, and actuators may be operated from this compact power conversion unit. Because of the...nature of aircraft systems, two of the most important design considerations are the maintenance of electrical power quality and minimization of weight

  9. 77 FR 38463 - Issuance of Special Airworthiness Certificates for Light-Sport Category Aircraft

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-28

    ... standards for LSA design, manufacturing, continued airworthiness, and maintenance. It also made... aviation authorities on any issues affecting the design, production, continued airworthiness, or other... assessment of the special light-sport aircraft (SLSA) manufacturing industry, the FAA is issuing this notice...

  10. High Reliability Engine Control Demonstrated for Aircraft Engines

    NASA Technical Reports Server (NTRS)

    Guo, Ten-Huei

    1999-01-01

    For a dual redundant-control system, which is typical for short-haul aircraft, if a failure is detected in a control sensor, the engine control is transferred to a safety mode and an advisory is issued for immediate maintenance action to replace the failed sensor. The safety mode typically results in severely degraded engine performance. The goal of the High Reliability Engine Control (HREC) program was to demonstrate that the neural-network-based sensor validation technology can safely operate an engine by using the nominal closed-loop control during and after sensor failures. With this technology, engine performance could be maintained, and the sensor could be replaced as a conveniently scheduled maintenance action.

  11. Improving ICT Governance by Reorganizing Operation of ICT and Software Applications: The First Step to Outsource

    NASA Astrophysics Data System (ADS)

    Johansson, Björn

    During recent years great attention has been paid to outsourcing as well as to the reverse, insourcing (Dibbern et al., 2004). There has been a strong focus on how the management of software applications and information and communication technology (ICT), expressed as ICT management versus ICT governance, should be carried out (Grembergen, 2004). The maintenance and operation of software applications and ICT use a lot of the resources spent on ICT in organizations today (Bearingpoint, 2004), and managers are asked to increase the business benefits of these investments (Weill & Ross, 2004). That is, they are asked to improve the usage of ICT and to develop new business critical solutions supported by ICT. It also means that investments in ICT and software applications need to be shown to be worthwhile. Basically there are two considerations to take into account with ICT usage: cost reduction and improving business value. How the governance and management of ICT and software applications are organized is important. This means that the improvement of the control of maintenance and operation may be of interest to executives of organizations. It can be stated that usage is dependent on how it is organized. So, if an increase of ICT governance is the same as having well-organized ICT resources, could this be seen as the first step in organizations striving for external provision of ICT? This question is dealt with to some degree in this paper.

  12. Aircraft Transparency Failure and Logistical Cost Analysis. Volume I. Program Summary

    DTIC Science & Technology

    1978-12-01

    Hours liv LIST OF ABBREVIATIONS (Continued) SFMC Field Maintenance Cost FMEA Failure Modes and Effect Analysis SFMS Field Maintenance Squadron FSN...3, CH-53, AND UH -1 Figure 3. Study Aircraft 10 I. 1. WINDSHIELDS 2. CANOPIES 3. WINDOWS INTERACTIVE SUPPORT SYSTEMS 1. ANTI-ICING 2. DEFOGGING 3...52,947 13,761 UH /TH-1F, 1P 73,431 73,640 Total helicopters 339,690 113,492 2.99 Bombers B-S2G 138,348 64,431 B-S2P 93,000 36,936 B-57 34,527 19,552

  13. Impact of future fuel properties on aircraft engines and fuel systems

    NASA Technical Reports Server (NTRS)

    Rudey, R. A.; Grobman, J. S.

    1978-01-01

    The effect of modifications in hydrocarbon jet fuels specifications on engine performance, component durability and maintenance, and aircraft fuel system performance is discussed. Specific topics covered include: specific fuel consumption; ignition at relight limits; exhaust emissions; combustor liner temperatures; carbon deposition; gum formation in fuel nozzles, erosion and corrosion of turbine blades and vanes; deposits in fuel system heat exchangers; and pumpability and flowability of the fuel. Data that evaluate the ability of current technology aircraft to accept fuel specification changes are presented, and selected technological advances that can reduce the severity of the problems are described and discussed.

  14. Botsourcing and outsourcing: Robot, British, Chinese, and German workers are for thinking--not feeling--jobs.

    PubMed

    Waytz, Adam; Norton, Michael I

    2014-04-01

    Technological innovations have produced robots capable of jobs that, until recently, only humans could perform. The present research explores the psychology of "botsourcing"-the replacement of human jobs by robots-while examining how understanding botsourcing can inform the psychology of outsourcing-the replacement of jobs in one country by humans from other countries. We test four related hypotheses across six experiments: (1) Given people's lay theories about the capacities for cognition and emotion for robots and humans, workers will express more discomfort with botsourcing when they consider losing jobs that require emotion versus cognition; (2) people will express more comfort with botsourcing when jobs are framed as requiring cognition versus emotion; (3) people will express more comfort with botsourcing for jobs that do require emotion if robots appear to convey more emotion; and (4) people prefer to outsource cognition- versus emotion-oriented jobs to other humans who are perceived as more versus less robotic. These results have theoretical implications for understanding social cognition about both humans and nonhumans and practical implications for the increasingly botsourced and outsourced economy.

  15. Evaluation of all-electric secondary power for transport aircraft

    NASA Technical Reports Server (NTRS)

    Murray, W. E.; Feiner, L. J.; Flores, R. R.

    1992-01-01

    This report covers a study by Douglas Aircraft Company (DAC) of electrical power systems for advanced transport aircraft based upon an all-electric design concept. The concept would eliminate distributed hydraulic and pneumatic secondary power systems, and feature an expanded secondary electrical power system redesigned to supply power to the loads customarily supplied by hydraulic or pneumatic power. The initial study was based on an advanced 20-kHz electrical power transmission and distribution system, using a system architecture supplied by NASA-Lewis Research Center for twin-engine aircraft with many advanced power conversion concepts. NASA-LeRC later requested DAC to refocus the study on 400-Hz secondary power distribution. Subsequent work was based on a three-engine MD-11 aircraft, selected by DAC as a baseline system design that would provide data for the comparative cost/benefit analysis. The study concluded that the 20-kHz concept produced many expected benefits, and that the all-electric trijet weight savings on hardware redesign would be 2,304 pounds plus a 2.1-percent fuel reduction and resized for a total weight reduction of 11,000 pounds. Cost reductions for a fleet of 800 aircraft in a 15-year production program were estimated at $76.71 million for RDT&E; $2.74 million per aircrat for production; $9.84 million for nonrecurring expenses; $120,000 per aircraft for product support; and $300,000 per aircraft per year for operating and maintenance costs, giving a present value of $1.914 billion saved or a future value of $10.496 billion saved.

  16. Eclipse program F-106 aircraft in flight, front view

    NASA Technical Reports Server (NTRS)

    1997-01-01

    Shot of the QF-106 aircraft in flight with the landing gear deployed. In 1997 and 1998, the Dryden Flight Research Center at Edwards, California, supported and hosted a Kelly Space & Technology, Inc. project called Eclipse, which sought to demonstrate the feasibility of a reusable tow-launch vehicle concept. The project goal was to successfully tow, inflight, a modified QF-106 delta-wing aircraft with an Air Force C-141A transport aircraft. This would demonstrate the possibility of towing and launching an actual launch vehicle from behind a tow plane. Dryden was the responsible test organization and had flight safety responsibility for the Eclipse project. Dryden provided engineering, instrumentation, simulation, modification, maintenance, range support, and research pilots for the test program. The Air Force Flight Test Center (AFFTC), Edwards, California, supplied the C-141A transport aircraft and crew and configured the aircraft as needed for the tests. The AFFTC also provided the concept and detail design and analysis as well as hardware for the tow system and QF-106 modifications. Dryden performed the modifications to convert the QF-106 drone into the piloted EXD-01 (Eclipse eXperimental Demonstrator-01) experimental aircraft. Kelly Space & Technology hoped to use the results gleaned from the tow test in developing a series of low-cost, reusable launch vehicles. These tests demonstrated the validity of towing a delta-wing aircraft having high wing loading, validated the tow simulation model, and demonstrated various operational procedures, such as ground processing of in-flight maneuvers and emergency abort scenarios.

  17. Evaluation of all-electric secondary power for transport aircraft

    NASA Astrophysics Data System (ADS)

    Murray, W. E.; Feiner, L. J.; Flores, R. R.

    1992-01-01

    This report covers a study by Douglas Aircraft Company (DAC) of electrical power systems for advanced transport aircraft based upon an all-electric design concept. The concept would eliminate distributed hydraulic and pneumatic secondary power systems, and feature an expanded secondary electrical power system redesigned to supply power to the loads customarily supplied by hydraulic or pneumatic power. The initial study was based on an advanced 20-kHz electrical power transmission and distribution system, using a system architecture supplied by NASA-Lewis Research Center for twin-engine aircraft with many advanced power conversion concepts. NASA-LeRC later requested DAC to refocus the study on 400-Hz secondary power distribution. Subsequent work was based on a three-engine MD-11 aircraft, selected by DAC as a baseline system design that would provide data for the comparative cost/benefit analysis. The study concluded that the 20-kHz concept produced many expected benefits, and that the all-electric trijet weight savings on hardware redesign would be 2,304 pounds plus a 2.1-percent fuel reduction and resized for a total weight reduction of 11,000 pounds. Cost reductions for a fleet of 800 aircraft in a 15-year production program were estimated at $76.71 million for RDT&E $2.74 million per aircrat for production; $9.84 million for nonrecurring expenses; $120,000 per aircraft for product support; and $300,000 per aircraft per year for operating and maintenance costs, giving a present value of $1.914 billion saved or a future value of $10.496 billion saved.

  18. Reduction of Maintenance Error Through Focused Interventions

    NASA Technical Reports Server (NTRS)

    Kanki, Barbara G.; Walter, Diane; Rosekind, Mark R. (Technical Monitor)

    1997-01-01

    It is well known that a significant proportion of aviation accidents and incidents are tied to human error. In flight operations, research of operational errors has shown that so-called "pilot error" often involves a variety of human factors issues and not a simple lack of individual technical skills. In aircraft maintenance operations, there is similar concern that maintenance errors which may lead to incidents and accidents are related to a large variety of human factors issues. Although maintenance error data and research are limited, industry initiatives involving human factors training in maintenance have become increasingly accepted as one type of maintenance error intervention. Conscientious efforts have been made in re-inventing the "team" concept for maintenance operations and in tailoring programs to fit the needs of technical operations. Nevertheless, there remains a dual challenge: to develop human factors interventions which are directly supported by reliable human error data, and to integrate human factors concepts into the procedures and practices of everyday technical tasks. In this paper, we describe several varieties of human factors interventions and focus on two specific alternatives which target problems related to procedures and practices; namely, 1) structured on-the-job training and 2) procedure re-design. We hope to demonstrate that the key to leveraging the impact of these solutions comes from focused interventions; that is, interventions which are derived from a clear understanding of specific maintenance errors, their operational context and human factors components.

  19. Wireless microsensors for health monitoring of aircraft structures

    NASA Astrophysics Data System (ADS)

    Varadan, Vijay K.

    2003-01-01

    navigation system and other microsensors for health monitoring and condition-based maintenance of structures, drag sensing and control of aircraft, strain and deflection of structures and systems, ice sensing on aircraft, remote temperature and humidity measurement of propellant in munitions, chemical sensing, etc. are discussed.

  20. An Examination of the Value of Overall Trust and Commitment Associated with Service Complexity in Higher Education Information Technology Outsourcing Relationships

    ERIC Educational Resources Information Center

    Falk, Monica I.

    2012-01-01

    Enterprise information systems (EIS) governance provides guidance, structure, and rules for companies within industry who use information technology (IT) support services, and in particular, for outsourced IT support. This study focuses on outsourcing from the client perspective for higher education and uses the qualitative methodology with a…

  1. 'Outsourced' patients and their companions: stories from forced medical travellers.

    PubMed

    Whittaker, Andrea

    2015-01-01

    In this paper, I describe the experience of 'outsourced' patients who are sent by their governments or insurers through contractual arrangements to a hospital in another country for treatment. I present case studies of nine patients and their accompanying families from the Gulf Cooperation Council (GCC) who were interviewed in a Thai hospital as part of a broader study of medical travel from patients' perspectives. The health systems of the GCC suffer shortages in infrastructure, human resources and management skills, and as a consequence patients with particular needs, especially in neurology, orthopaedics and oncology may be sent overseas for treatment. Patients experience long stays overseas producing a considerable burden to their families supporting them. Such patients complicate notions of medical travel but their status also contrasts markedly from stereotypes held about Gulf patients within Thailand. Despite their appreciation of government sponsoring, for many patients the experience of care in Thailand underscored perceived inadequacies of their home health systems and governments. For some, outsourcing represented a betrayal of the obligations of their states to its citizens.

  2. Avoiding the Ax: How to Keep from Being Downsized or Outsourced.

    ERIC Educational Resources Information Center

    Bates, Mary Ellen

    1997-01-01

    Gives guidance in preventing library staff downsizing or outsourcing: remember the competition, read financial reports and periodicals, identify key library executives and patrons, define the library as a "profit center," market the library, make yourself essential and indispensable, remind users of the library's resources, embrace the…

  3. Using Intelligent Simulation to Enhance Human Performance in Aircraft Maintenance

    NASA Technical Reports Server (NTRS)

    Johnson, William B.; Norton, Jeffrey E.

    1992-01-01

    Human factors research and development investigates the capabilities and limitations of the human within a system. Of the many variables affecting human performance in the aviation maintenance system, training is among the most important. The advent of advanced technology hardware and software has created intelligent training simulations. This paper describes one advanced technology training system under development for the Federal Aviation Administration.

  4. The nature of outsourced preclinical research--the example of chemical synthesis.

    PubMed

    Festel, Gunter W

    2013-09-01

    The possibility to buy standardized external services or even new and innovative methods within drug discovery has increased dramatically during the last decades. Service providers are able to provide timely and efficient solutions to any given problem within preclinical research. The outsourcing behavior depends on the specific company type. Generally, the outsourcing level of emerging pharmaceutical and biotechnology companies is much higher than established companies due to low or missing internal resources. Whereas the "make-or-buy" decisions of large and fully integrated pharmaceutical companies are mainly competency driven, those of mid-size and small pharmaceutical, as well as biotech companies show a specific combination of cost/capacity and competency. The three different cooperation models "price competition", "project selection," and "strategic partnership" were identified. For all types of companies, the cooperation model of "strategic partnership" offers access to high-level expertise while reducing fixed costs and complexity. This was shown using chemical synthesis as an example but is also true for other areas of preclinical research.

  5. Micro- and nano-NDE systems for aircraft: great things in small packages

    NASA Astrophysics Data System (ADS)

    Malas, James C.; Kropas-Hughes, Claudia V.; Blackshire, James L.; Moran, Thomas; Peeler, Deborah; Frazier, W. G.; Parker, Danny

    2003-07-01

    Recent advancements in small, microscopic NDE sensor technologies will revolutionize how aircraft maintenance is done, and will significantly improve the reliability and airworthiness of current and future aircraft systems. A variety of micro/nano systems and concepts are being developed that will enable whole new capabilities for detecting and tracking structural integrity damage. For aging aircraft systems, the impact of micro-NDE sensor technologies will be felt immediately, with dramatic reductions in labor for maintenance, and extended useable life of critical components being two of the primary benefits. For the fleet management of future aircraft systems, a comprehensive evaluation and tracking of vehicle health throughout its entire life cycle will be needed. Indeed, micro/nano NDE systems will be instrumental in realizing this futuristic vision. Several major challenges will need to be addressed, however, before micro- and nano-NDE systems can effectively be implemented, and this will require interdisciplinary research approaches, and a systematic engineering integration of the new technologies into real systems. Future research will need to emphasize systems engineering approaches for designing materials and structures with in-situ inspection and prognostic capabilities. Recent advances in 1) embedded / add-on micro-sensors, 2) computer modeling of nondestructive evaluation responses, and 3) wireless communications are important steps toward this goal, and will ultimately provide previously unimagined opportunities for realizing whole new integrated vehicle health monitoring capabilities. The future use of micro/nano NDE technologies as vehicle health monitoring tools will have profound implications, and will provide a revolutionary way of doing NDE in the near and distant future.

  6. Conference report: a hitchhiker's guide to outsourcing ADME studies: the inside of outsourcing.

    PubMed

    Pritchard, J Fred; Anderson, Shelby R; Breuckner, Claudia; Premkumar, Noel D; Polli, Joseph W

    2013-02-01

    This report gives a summary of the key points raised during a roundtable discussion convened at the American Association of Pharmaceutical Scientists 2012 Annual Meeting and Exposition held in Chicago on 17 October 2012. The science of ADME continues to grow, as does the impact of these studies on drug development. Understanding ADME requires efforts from several scientific specialties. With reductions in pharmaceutical company R&D staff there has been a corresponding growth in CROs with the capabilities and expertise to perform ADME work. This roundtable explored the challenges inherent in understanding ADME and the issues that arise when ADME studies shift from in-house study directors to external scientists working within the business model of a CRO. Pharmaceutical industry scientists and procurement specialists can satisfy their expectations by awareness of the growing expertise within CROs and the need for open communication among all partners involved in outsourced work.

  7. History of the KC-10A Aircraft Acquisition

    DTIC Science & Technology

    1988-04-01

    in other research reports or educational pursuits contingent upon the following stipulations: - Reproduction rights do not extend to any copyrighted...MAC, AFLC, and others) would create data for flight, maintenance, and technical data manuals, and evaluate human engineering factors. This testing...productio); ond deli.erme:; ra.. a fa:st rate and the acquisition program began to phase out.. The, total fleot gjrew to 52 aircraft, and del ivf , ics of th:ý

  8. Commercial-Aircraft Protection System

    NASA Astrophysics Data System (ADS)

    Case, Russell L., Jr.; Wolff, Peter H.

    2004-09-01

    Recent world events have identified needs for a commercial aircraft defense system against Man-Portable Air Defense Systems (MANPADS), such as SA-7 and Stinger shoulder launched surface-to-air missiles. Technical challenges include target detection, identification and countermeasures. Political and societal challenges include cost, time to deployment, ground and air safety, and reliability. These challenges, as well as many others, have been met and overcome with the development of Thor Systems' Commercial-Aircraft Protection System (C-APS). C-APS makes use of commercial technology such as radar and infrared sensors with a laser-based countermeasure. Unlike adapted military systems, C-APS detects the threat long before the military versions by employing a 360 degree hemispherical scan, identifying the threat with an infrared sensor and employing a directed laser to not only deflect the target but to permanently disable its seeker. Enhanced capabilities include multiple threat elimination and closed-loop technology for kill verification. All of this is accomplished with development costs less than half that required to convert military technology, manufacturing costs significantly less than competitive products, and a maintenance cycle coincident with standard FAA requirements, which are significantly longer than current systems.

  9. The Joint Strike Fighter (JSF) PHM and the Autonomic Logistic Concept: Potential Impact on Aging Aircraft Problems

    DTIC Science & Technology

    2003-02-01

    and highly intelligent aircraft. A major tenet of this discussion will be that robust information sources provided by the PHM system can and will be...and maintainable (R+M) designed intelligent aircraft which encompasses a comprehensive Prognostics and Health Management (PHM) capability to enhance...hydraulic pump has a 90% chance of failing within the next 10 flight hours. This way, maintenance personnel will be able to make intelligent ,.informed

  10. The all-electric aircraft - A systems view and proposed NASA research Programs

    NASA Technical Reports Server (NTRS)

    Spitzer, C. R.

    1984-01-01

    It is expected that all-electric aircraft, whether military or commercial, will exhibit reduced weight, acquisition cost and fuel consumption, an expanded flight envelope and improved survivability and reliability, simpler maintenance, and reduced support equipment. Also noteworthy are dramatic improvements in mission adaptability, based on the degree to which control system performance relies on easily exchanged software. Flight-critical secondary power and control systems whose malfunction would mean loss of an aircraft pose failure detection and design methodology problems, however, that have only begun to be addressed. NASA-sponsored research activities concerned with these problems and prospective benefits are presently discussed.

  11. Outsourcing: a managerial competency for the 21st century.

    PubMed

    Shaffer, F A

    2000-01-01

    The widespread application of outsourcing has been fueled by the changing nature of the work contract between employers and employees. The large-scale corporate downsizing that began in the late 1980s inspired a trend away from employer loyalty. This fact, coupled with today's tight labor market, has created a "guerrilla" work force comprised of deal-hungry professionals conditioned to signing bonuses, stock options, and higher-than-scale salaries.

  12. Walter C. Williams Research Aircraft Integration Facility (RAIF)

    NASA Technical Reports Server (NTRS)

    1996-01-01

    in the Thermostructural Laboratory, now also resides in the ITF. In preparing a research aircraft for flight testing, it is vital to measure its structural frequencies and mode shapes and compare results to the models used in design analysis. The final function performed in the ITF is routine aircraft maintenance. This includes preflight and post-flight instrumentation checks and the servicing of hydraulics, avionics, and engines necessary on any research aircraft. Aircraft are not merely moved to the ITF for automated testing purposes but are housed there throughout their flight test programs.

  13. Does your equipment maintenance management program measure up?

    PubMed

    Deinstadt, Deborah C

    2003-01-01

    Identifying a clear maintenance philosophy is the first step toward choosing the right program for your healthcare organization. The second step is gaining a clear understanding of how proposed savings and improvements will be delivered. The third and last step is requiring that the proposed company or manager have specific tools in place for measuring and analyzing program performance. There are three primary philosophies underlying current equipment management options. These include risk-transfer philosophy (e.g., maintenance insurance, service contracts, multi-vendor and outsource programs), asset management philosophy (e.g., programs delivering a management system based on managed time-and-materials), and internal management (in-house managed programs). The last step in selecting the right program is insisting that proper performance measurements be built into the proposed management program. A well-managed program provides results in three general areas: financial outcomes, operational improvements and process improvements. Financial outcomes are the easiest to measure. Operational and process improvements are more challenging to assess but equally important to the program's overall success. To accurately identify results in these three areas, the overall management program should measure the following eight separate components: procedures and support for department staff; equipment inventory, benchmark costs, and budget guidelines; experienced equipment support team; objective, independent analysis of maintenance events; repair documentation and reporting; vendor relations; equipment acquisition analysis; and recommendations for improvement. Do everything you reasonably can to assure that the selected company can work side-by-side with you, providing objective, measurable advice that is ultimately in your best interest. You will then know that you have been thorough in your marketplace selection and can confidently move into implementation, expecting tangible

  14. Study of aircraft in intraurban transportation systems, volume 3

    NASA Technical Reports Server (NTRS)

    Stout, E. G.; Kesling, P. H.; Matteson, D. E.; Sherwood, D. E.; Tuck, W. R., Jr.; Vaughn, L. A.

    1971-01-01

    An investigation of three aircraft concepts, deflected slipstream STOL, helicopter VTOL, and fixed wing STOL, is presented. An attempt was made to determine the best concept for the intraurban transportation system. Desirability of the concept was based on ease of maintenance, development timing, reliability, operating costs, and the noise produced. Indications are that the deflected slipstream STOL is best suited for intraurban transportation. Tables and graphs are included.

  15. The Guardian: Preliminary design of a close air support aircraft

    NASA Technical Reports Server (NTRS)

    Haag, Jonathan; Huber, David; Mcinerney, Kelly; Mulligan, Greg; Pessin, David; Seelos, Michael

    1991-01-01

    One design is presented of a Close Air Support (CAS) aircraft. It is a canard wing, twin engine, twin vertical tail aircraft that has the capability to cruise at 520 knots. The Guardian contains state of the art flight control systems. Specific highlights of the Guardian include: (1) low cost (the acquisition cost per airplane is $13.6 million for a production of 500 airplanes); (2) low maintenance (it was designed to be easily maintainable in unprepared fields); and (3) high versatility (it can perform a wide range of missions). Along with being a CAS aircraft, it is capable of long ferry missions, battlefield interdiction, maritime attack, and combat rescue. The Guardian is capable of a maximum ferry of 3800 nm, can takeoff in a distance of 1700 ft, land in a ground roll distance of 1644 ft. It has a maximum takeoff weight of 48,753 lbs, and is capable of carrying up to 19,500 lbs of ordinance.

  16. Cost versus control: Understanding ownership through outsourcing in hospitals.

    PubMed

    Dalton, Christina Marsh; Warren, Patrick L

    2016-07-01

    For-profit hospitals in California contract out services much more intensely than either private nonprofit or public hospitals. To explain why, we build a model in which the outsourcing decision is a trade-off between cost and control. Since nonprofit firms are more restricted in how they consume net revenues, they experience more rapidly diminishing value of a dollar saved, and they are less attracted to a low-cost but low-control outsourcing opportunity than a for-profit firm is. This difference is exaggerated in services where the benefits of controlling the details of production are particularly important but minimized when a fixed-cost shock raises the marginal value of a dollar of cost savings. We test these predictions in a panel of California hospitals, finding evidence for each and that the set of services that private non-profits are particularly interested in controlling (physician-intensive services) is very different from those than public hospitals are particularly interested in (labor-intensive services). These results suggest that a model of public or nonprofit make-or-buy decisions should be more than a simple relabeling of a model derived in the for-profit context. Copyright © 2016 Elsevier B.V. All rights reserved.

  17. [The algorithm for the medical maintenance of the aircraft personnel suffering from chronic sensorineural impairment of hearing].

    PubMed

    Pankova, V B; Skryabina, L Yu; Barkhatova, O A

    2016-01-01

    The present study was designed to systematize the causes underlying the development of chronic sensorineural impairment of hearing in the aircraft personnel engaged in commercial aviation of the Russian Federation. A detailed clinical and audiological picture of chronic sensorineural loss of hearing in the aircraft personnel is presented with special reference to the criteria accepted in the civil aviationfor the evaluation of professional suitability and occupational selection in terms of hearing conditions. The study has demonstrated the paramount importance of the aviation medical expertise for the flight safety control in civil aviation. We analyzed the results of the audiological examination of the aircraft personnel suffering from chronic sensorineural impairment of hearing and proposed the algorithm for the rehabilitation of such subjects taking into consideration the stage of the chronic process.

  18. 14 CFR 91.1443 - CAMP: Airworthiness release or aircraft maintenance log entry.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... certificated mechanic. (c) Notwithstanding paragraph (b)(3) of this section, after maintenance, preventive... its manual that the signature of an authorized certificated mechanic or repairman constitutes that...

  19. 14 CFR 91.1443 - CAMP: Airworthiness release or aircraft maintenance log entry.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... certificated mechanic. (c) Notwithstanding paragraph (b)(3) of this section, after maintenance, preventive... its manual that the signature of an authorized certificated mechanic or repairman constitutes that...

  20. 14 CFR 91.1443 - CAMP: Airworthiness release or aircraft maintenance log entry.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... certificated mechanic. (c) Notwithstanding paragraph (b)(3) of this section, after maintenance, preventive... its manual that the signature of an authorized certificated mechanic or repairman constitutes that...

  1. 14 CFR 91.1443 - CAMP: Airworthiness release or aircraft maintenance log entry.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... certificated mechanic. (c) Notwithstanding paragraph (b)(3) of this section, after maintenance, preventive... its manual that the signature of an authorized certificated mechanic or repairman constitutes that...

  2. 14 CFR 91.1443 - CAMP: Airworthiness release or aircraft maintenance log entry.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... certificated mechanic. (c) Notwithstanding paragraph (b)(3) of this section, after maintenance, preventive... its manual that the signature of an authorized certificated mechanic or repairman constitutes that...

  3. CREW CHIEF: A computer graphics simulation of an aircraft maintenance technician

    NASA Technical Reports Server (NTRS)

    Aume, Nilss M.

    1990-01-01

    Approximately 35 percent of the lifetime cost of a military system is spent for maintenance. Excessive repair time is caused by not considering maintenance during design. Problems are usually discovered only after a mock-up has been constructed, when it is too late to make changes. CREW CHIEF will reduce the incidence of such problems by catching design defects in the early design stages. CREW CHIEF is a computer graphic human factors evaluation system interfaced to commercial computer aided design (CAD) systems. It creates a three dimensional man model, either male or female, large or small, with various types of clothing and in several postures. It can perform analyses for physical accessibility, strength capability with tools, visual access, and strength capability for manual materials handling. The designer would produce a drawing on his CAD system and introduce CREW CHIEF in it. CREW CHIEF's analyses would then indicate places where problems could be foreseen and corrected before the design is frozen.

  4. NASA DC-8 Ground Support Technician Joe Niquette performs routine maintenance on the DC-8 aircraft in Punta Arenas, Chile

    NASA Image and Video Library

    2004-03-17

    NASA DC-8 Ground Support Technician Joe Niquette performs routine maintenance on the DC-8 aircraft at Carlos Ibanez del Campo International Airport in Punta Arenas, Chile. AirSAR 2004 is a three-week expedition by an international team of scientists that is using an all-weather imaging tool, called the Airborne Synthetic Aperture Radar (AirSAR) which is located onboard NASA's DC-8 airborne laboratory. Scientists from many parts of the world including NASA's Jet Propulsion Laboratory are combining ground research done in several areas in Central and South America with NASA's AirSAR technology to improve and expand on the quality of research they are able to conduct. In South America and Antarctica, AirSAR will collect imagery and data to help determine the contribution of Southern Hemisphere glaciers to sea level rise due to climate change. In Patagonia, researchers found this contribution had more than doubled from 1995 to 2000, compared to the previous 25 years. AirSAR data will make it possible to determine whether that trend is decreasing, continuing or accelerating. AirSAR will also provide reliable information on ice shelf thickness to measure the contribution of the glaciers to sea level.

  5. NASA Dryden DC-8 maintenance crew members inspect the aircraft prior to take-off for an AirSAR 2004 flight

    NASA Image and Video Library

    2004-03-06

    NASA Dryden DC-8 maintenance crew members inspect the aircraft prior to take-off. L-R; Scott Silver, Paul Ristrim and Mike Lakowski. AirSAR 2004 Mesoamerica is a three-week expedition by an international team of scientists that uses an all-weather imaging tool, called the Airborne Synthetic Aperture Radar (AirSAR) which is located onboard NASA's DC-8 airborne laboratory. Scientists from many parts of the world including NASA's Jet Propulsion Laboratory are combining ground research done in several areas in Central America with NASA's AirSAR technology to improve and expand on the quality of research they are able to conduct. The radar, developed by NASA's Jet Propulsion Laboratory, can penetrate clouds and also collect data at night. Its high-resolution sensors operate at multiple wavelengths and modes, allowing AirSAR to see beneath treetops, through thin sand, and dry snow pack. AirSAR's 2004 campaign is a collaboration of many U.S. and Central American institutions and scientists, including NASA; the National Science Foundation; the Smithsonian Institution; National Geographic; Conservation International; the Organization of Tropical Studies; the Central American Commission for Environment and Development; and the Inter-American Development Bank.

  6. Forecasting the impact of virtual environment technology on maintenance training

    NASA Technical Reports Server (NTRS)

    Schlager, Mark S.; Boman, Duane; Piantanida, Tom; Stephenson, Robert

    1993-01-01

    To assist NASA and the Air Force in determining how and when to invest in virtual environment (VE) technology for maintenance training, we identified possible roles for VE technology in such training, assessed its cost-effectiveness relative to existing technologies, and formulated recommendations for a research agenda that would address instructional and system development issues involved in fielding a VE training system. In the first phase of the study, we surveyed VE developers to forecast capabilities, maturity, and estimated costs for VE component technologies. We then identified maintenance tasks and their training costs through interviews with maintenance technicians, instructors, and training developers. Ten candidate tasks were selected from two classes of maintenance tasks (seven aircraft maintenance and three space maintenance) using five criteria developed to identify types of tasks most likely to benefit from VE training. Three tasks were used as specific cases for cost-benefit analysis. In formulating research recommendations, we considered three aspects of feasibility: technological considerations, cost-effectiveness, and anticipated R&D efforts. In this paper, we describe the major findings in each of these areas and suggest research efforts that we believe will help achieve the goal of a cost-effective VE maintenance training system by the next decade.

  7. Test and Evaluation of Ultrasonic Additive Manufacturing (UAM) for a Large Aircraft Maintenance Shelter (LAMS) Baseplate

    DTIC Science & Technology

    2015-03-26

    TEST AND EVALUATION OF ULTRASONIC ADDITIVE MANUFACTURING (UAM) FOR A LARGE AREA MAINTENANCE...States Government. AFIT-ENV-MS-15-M-158 TEST AND EVALUATION OF ULTRASONIC ADDITIVE MANUFACTURING FOR A LARGE AREA MAINTENANCE SHELTER...Civil Engineer (CE) operations. This research replicates a Large Area Maintenance Shelter (LAMS) baseplate design for ultrasonic additive

  8. Fast, cheap, and out of control? Speculations and ethical concerns in the conduct of outsourced clinical trials in India.

    PubMed

    Kamat, Vinay R

    2014-03-01

    The globalization of biopharmaceutical clinical trials and their offshore outsourcing, from the West to low and middle-income countries, has come under increasing scrutiny from academic scholars, practitioners, regulatory agencies and the media. This article reports the results of a study conducted in Bangalore and Hyderabad between 2007 and 2009, to elicit the perspectives of stakeholders, concerning media representations of their work and the ethical issues that emanate from their engagement in the clinical trials enterprise. In acknowledging the inherently problematic nature of the outsourcing of clinical trials to low income countries, I argue that the practice of not prioritizing research on diseases that are most prevalent among communities, from which subjects are recruited, demands a coordinated and sustained critique. I propose that the critical discourse on the outsourcing of clinical trials should not only emphasize the perils of this practice, but also address some broader issues of equity and distributive justice that determine people's access to basic health care in low income countries. Close attention to the specific context of clinical trials in an increasingly neoliberal medical and health environment in emerging economies such as India can provide critical insights into the on-the-ground complexities and challenges of outsourced global clinical trials. Copyright © 2013 Elsevier Ltd. All rights reserved.

  9. Optical Fiber Sensors for Aircraft Structural Health Monitoring

    PubMed Central

    García, Iker; Zubia, Joseba; Durana, Gaizka; Aldabaldetreku, Gotzon; Illarramendi, María Asunción; Villatoro, Joel

    2015-01-01

    Aircraft structures require periodic and scheduled inspection and maintenance operations due to their special operating conditions and the principles of design employed to develop them. Therefore, structural health monitoring has a great potential to reduce the costs related to these operations. Optical fiber sensors applied to the monitoring of aircraft structures provide some advantages over traditional sensors. Several practical applications for structures and engines we have been working on are reported in this article. Fiber Bragg gratings have been analyzed in detail, because they have proved to constitute the most promising technology in this field, and two different alternatives for strain measurements are also described. With regard to engine condition evaluation, we present some results obtained with a reflected intensity-modulated optical fiber sensor for tip clearance and tip timing measurements in a turbine assembled in a wind tunnel. PMID:26134107

  10. Optical Fiber Sensors for Aircraft Structural Health Monitoring.

    PubMed

    García, Iker; Zubia, Joseba; Durana, Gaizka; Aldabaldetreku, Gotzon; Illarramendi, María Asunción; Villatoro, Joel

    2015-06-30

    Aircraft structures require periodic and scheduled inspection and maintenance operations due to their special operating conditions and the principles of design employed to develop them. Therefore, structural health monitoring has a great potential to reduce the costs related to these operations. Optical fiber sensors applied to the monitoring of aircraft structures provide some advantages over traditional sensors. Several practical applications for structures and engines we have been working on are reported in this article. Fiber Bragg gratings have been analyzed in detail, because they have proved to constitute the most promising technology in this field, and two different alternatives for strain measurements are also described. With regard to engine condition evaluation, we present some results obtained with a reflected intensity-modulated optical fiber sensor for tip clearance and tip timing measurements in a turbine assembled in a wind tunnel.

  11. FORESEE: Fully Outsourced secuRe gEnome Study basEd on homomorphic Encryption

    PubMed Central

    2015-01-01

    Background The increasing availability of genome data motivates massive research studies in personalized treatment and precision medicine. Public cloud services provide a flexible way to mitigate the storage and computation burden in conducting genome-wide association studies (GWAS). However, data privacy has been widely concerned when sharing the sensitive information in a cloud environment. Methods We presented a novel framework (FORESEE: Fully Outsourced secuRe gEnome Study basEd on homomorphic Encryption) to fully outsource GWAS (i.e., chi-square statistic computation) using homomorphic encryption. The proposed framework enables secure divisions over encrypted data. We introduced two division protocols (i.e., secure errorless division and secure approximation division) with a trade-off between complexity and accuracy in computing chi-square statistics. Results The proposed framework was evaluated for the task of chi-square statistic computation with two case-control datasets from the 2015 iDASH genome privacy protection challenge. Experimental results show that the performance of FORESEE can be significantly improved through algorithmic optimization and parallel computation. Remarkably, the secure approximation division provides significant performance gain, but without missing any significance SNPs in the chi-square association test using the aforementioned datasets. Conclusions Unlike many existing HME based studies, in which final results need to be computed by the data owner due to the lack of the secure division operation, the proposed FORESEE framework support complete outsourcing to the cloud and output the final encrypted chi-square statistics. PMID:26733391

  12. FORESEE: Fully Outsourced secuRe gEnome Study basEd on homomorphic Encryption.

    PubMed

    Zhang, Yuchen; Dai, Wenrui; Jiang, Xiaoqian; Xiong, Hongkai; Wang, Shuang

    2015-01-01

    The increasing availability of genome data motivates massive research studies in personalized treatment and precision medicine. Public cloud services provide a flexible way to mitigate the storage and computation burden in conducting genome-wide association studies (GWAS). However, data privacy has been widely concerned when sharing the sensitive information in a cloud environment. We presented a novel framework (FORESEE: Fully Outsourced secuRe gEnome Study basEd on homomorphic Encryption) to fully outsource GWAS (i.e., chi-square statistic computation) using homomorphic encryption. The proposed framework enables secure divisions over encrypted data. We introduced two division protocols (i.e., secure errorless division and secure approximation division) with a trade-off between complexity and accuracy in computing chi-square statistics. The proposed framework was evaluated for the task of chi-square statistic computation with two case-control datasets from the 2015 iDASH genome privacy protection challenge. Experimental results show that the performance of FORESEE can be significantly improved through algorithmic optimization and parallel computation. Remarkably, the secure approximation division provides significant performance gain, but without missing any significance SNPs in the chi-square association test using the aforementioned datasets. Unlike many existing HME based studies, in which final results need to be computed by the data owner due to the lack of the secure division operation, the proposed FORESEE framework support complete outsourcing to the cloud and output the final encrypted chi-square statistics.

  13. Aircraft empennage structural detail design

    NASA Technical Reports Server (NTRS)

    Meholic, Greg; Brown, Rhonda; Hall, Melissa; Harvey, Robert; Singer, Michael; Tella, Gustavo

    1993-01-01

    This project involved the detailed design of the aft fuselage and empennage structure, vertical stabilizer, rudder, horizontal stabilizer, and elevator for the Triton primary flight trainer. The main design goals under consideration were to illustrate the integration of the control systems devices used in the tail surfaces and their necessary structural supports as well as the elevator trim, navigational lighting system, electrical systems, tail-located ground tie, and fuselage/cabin interface structure. Accommodations for maintenance, lubrication, adjustment, and repairability were devised. Weight, fabrication, and (sub)assembly goals were addressed. All designs were in accordance with the FAR Part 23 stipulations for a normal category aircraft.

  14. Black Box Thinking: Analysis of a Service Outsourcing Case in Insurance

    ERIC Educational Resources Information Center

    Witman, Paul D.; Njunge, Christopher

    2016-01-01

    Often, users of information systems (both automated and manual) must analyze those systems in a "black box" fashion, without being able to see the internals of how the system is supposed to work. In this case of business process outsourcing, an insurance industry customer encounters an ongoing stream of customer service issues, with both…

  15. Aircraft Structural Design Handbook for Lower Cost Maintenance and Repair

    DTIC Science & Technology

    1977-03-01

    Structure Repair and Maintenance program under Air Force contract F33615-74-C-3101, Project No. 1368, Task No. 136802. The work was performed by...Interchangeability 6.4.5.3 Work Area Consideration 6.5 Life Cycle Cost Impact Considerati ons 6.5.1 Introduction 6.5.2 Objective 6.5.3 Life Cycle Cost...engine sonic vibration, ^auses working of the vane assemblies and their inboard and outboard attach members resulting in fatigue cracks. The constant

  16. A Comprehensive Toolset for General-Purpose Private Computing and Outsourcing

    DTIC Science & Technology

    2016-12-08

    project and scientific advances made towards each of the research thrusts throughout the project duration. 1 Project Objectives Cloud computing enables...possibilities that the cloud enables is computation outsourcing, when the client can utilize any necessary computing resources for its computational task...Security considerations, however, stand on the way of harnessing the full benefits of cloud computing to the fullest extent and prevent clients from

  17. A Secure and Verifiable Outsourced Access Control Scheme in Fog-Cloud Computing.

    PubMed

    Fan, Kai; Wang, Junxiong; Wang, Xin; Li, Hui; Yang, Yintang

    2017-07-24

    With the rapid development of big data and Internet of things (IOT), the number of networking devices and data volume are increasing dramatically. Fog computing, which extends cloud computing to the edge of the network can effectively solve the bottleneck problems of data transmission and data storage. However, security and privacy challenges are also arising in the fog-cloud computing environment. Ciphertext-policy attribute-based encryption (CP-ABE) can be adopted to realize data access control in fog-cloud computing systems. In this paper, we propose a verifiable outsourced multi-authority access control scheme, named VO-MAACS. In our construction, most encryption and decryption computations are outsourced to fog devices and the computation results can be verified by using our verification method. Meanwhile, to address the revocation issue, we design an efficient user and attribute revocation method for it. Finally, analysis and simulation results show that our scheme is both secure and highly efficient.

  18. A Secure and Verifiable Outsourced Access Control Scheme in Fog-Cloud Computing

    PubMed Central

    Fan, Kai; Wang, Junxiong; Wang, Xin; Li, Hui; Yang, Yintang

    2017-01-01

    With the rapid development of big data and Internet of things (IOT), the number of networking devices and data volume are increasing dramatically. Fog computing, which extends cloud computing to the edge of the network can effectively solve the bottleneck problems of data transmission and data storage. However, security and privacy challenges are also arising in the fog-cloud computing environment. Ciphertext-policy attribute-based encryption (CP-ABE) can be adopted to realize data access control in fog-cloud computing systems. In this paper, we propose a verifiable outsourced multi-authority access control scheme, named VO-MAACS. In our construction, most encryption and decryption computations are outsourced to fog devices and the computation results can be verified by using our verification method. Meanwhile, to address the revocation issue, we design an efficient user and attribute revocation method for it. Finally, analysis and simulation results show that our scheme is both secure and highly efficient. PMID:28737733

  19. Nondestructive inspection of bonded composite doublers for aircraft

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Roach, D.; Moore, D.; Walkington, P.

    1996-12-31

    One major thrust in FAA`s National Aging Aircraft Research Program is to foster new technologies in civil aircraft maintenance. Recent DOD and other government developments in using bonded composite doublers on metal structures support the need for validation of such doubler applications on US certificated airplanes. In this study, a specific composite application was chosen on an L-1011 aircraft. Primary inspection requirements for these doublers include identifying disbonds between composite laminate and aluminum parent material, and delaminations in the composite laminate. Surveillance of cracks or corrosion in the parent aluminum material beneath the double is also a concern. No singlemore » NDI method can inspect for every flaw type, therefore we need to know NDI capabilities and limitations. This paper reports on a series of NDI tests conducted on laboratory test structures and on a fuselage section from a retired L-1011. Application of ultrasonics, x-ray, and eddy current to composite doublers and results from test specimens loaded to provide a changing flaw profile, are presented in this paper. Development of appropriate inspection calibration standards are also discussed.« less

  20. 14 CFR 91.1411 - Continuous airworthiness maintenance program use by fractional ownership program manager.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... program use by fractional ownership program manager. 91.1411 Section 91.1411 Aeronautics and Space FEDERAL... airworthiness maintenance program use by fractional ownership program manager. Fractional ownership program... through 91.1443. Any program manager who elects to maintain the program aircraft using a continuous...