Science.gov

Sample records for airfield lighting systems

  1. Renewable Energy, Photovoltaic Systems Near Airfields. Electromagnetic Interference

    SciTech Connect

    Deline, Chris; Dann, Geoff

    2015-04-01

    Recent increases in photovoltaic (PV) systems on Department of the Navy (DON) land and potential siting near airfields prompted Commander, Naval Installations Command to fund the Naval Facilities Engineering Command to evaluate the impact of electromagnetic interference (EMI) from PV systems on airfield electronic equipment. Naval Facilities Engineering and Expeditionary Warfare Center tasked Department of Energy National Renewable Energy laboratory (NREL) to conduct the assessment. PV systems often include high-speed switching semiconductor circuits to convert the voltage produced by the PV arrays to the voltage needed by the end user. Switching circuits inherently produce electromagnetic radiation at harmonics of the switching frequency. In this report, existing literature is summarized and tests to measure emissions and mitigation methods are discussed. The literature shows that the emissions from typical PV systems are low strength and unlikely to cause interference to most airfield electronic systems. With diligent procurement and siting of PV systems, including specifications for FCC Part 15 Class A compliant equipment and a 250-foot setback from communication equipment, NREL anticipates little to no EMI impact on nearby communications or telemetry equipment.

  2. Steering system of a vehicle, such as a snow removing machine for airfields

    NASA Astrophysics Data System (ADS)

    Rantalahti, Esko T.

    1991-12-01

    An improved steering system is disclosed for a vehicle comprising a cabin with front wheels, which are steered by a steering wheel, and a rearward portion carrying a drive unit and with driven rear wheels. The rearward portion is journalled about a vertical shaft to the forward portion of the vehicle, and a second separate steering mechanism is provided for steering the rearward portion. The second separate steering mechanism of the rearward portion comprises a control unit whereby it may be synchronized to operate in an opposite turning direction to that of the steering movements of the front wheels. The control unit is adapted to lock the rearward portion in a desired position, so that, for example, the vehicle can be driven diagonally with the side first. The second steering mechanism comprises a separate hydraulic system controlled from the control unit. Sensors are connected for sensing the steering angle of both the steering mechanisms, such that signals from the sensors may cause the steering of the rearward portion to follow the steering of the front wheels. The steering system of the invention is particularly applicable to snow removal machines used on airfields. In such machines, the front and rear wheel shafts are often 10-15 m distant from each other, but the invention enables easy and reliable linkage without the need for heavy shafts. The invention also enables a long snow-removing machine to turn on a very small radius, which speeds up movements and operation when clearing airfields.

  3. Computer-based test system for the Tactical Airfield Attack Munition (TAAM) safing, arming, and fuzing system

    SciTech Connect

    Warhus, J.; Castleton, R.; Lanning, S.

    1981-12-01

    Testing and quality assurance of large numbers of firing systems are an essential part of the development of the Tactical Airfield Attack Munition (TAAM). A computerized test and data acquisition system has been developed to make the testing and quality assurance workload manageable. The system hardware utilizes an LSI-11/23 computer, a Tektronix 7612 transient digitizer, and various other programmable instruments and power supplies. The system is capable of measuring and analyzing mechanical shock and fireset transient waveforms, automating testing sequences, and making records and comparisons of the test results. The system architecture is flexible for general purpose firing system development work.

  4. Summary of hydrologic testing of the Floridan aquifer system at Hunter Army Airfield, Chatham County, Georgia

    USGS Publications Warehouse

    Williams, Lester J.

    2010-01-01

    A 1,168-foot deep test well was completed at Hunter Army Airfield in the summer of 2009 to investigate the potential of using the Lower Floridan aquifer as a source of water supply to satisfy increased needs as a result of base expansion and increased troop levels. The U.S. Geological Survey conducted hydrologic testing at the test site including flowmeter surveys, packer-slug tests, and aquifer tests of the Upper and Lower Floridan aquifers. Flowmeter surveys were completed at different stages of well construction to determine the depth and yield of water-bearing zones and to identify confining beds that separate the main producing aquifers. During a survey when the borehole was open to both the upper and lower aquifers, five water-bearing zones in the Upper Floridan aquifer supplied 83.5 percent of the total pumpage, and five water-bearing zones in the Lower Floridan aquifer supplied the remaining 16.5 percent. An upward gradient was indicated from the ambient flowmeter survey: 7.6 gallons per minute of groundwater was detected entering the borehole between 750 and 1,069 feet below land surface, then moved upward, and exited the borehole into lower-head zones between 333 and 527 feet below land surface. During a survey of the completed Lower Floridan well, six distinct water-producing zones were identified; one 17-foot-thick zone at 768-785 feet below land surface yielded 47.9 percent of the total pumpage while the remaining five zones yielded between 2 and 15 percent each. The thickness and hydrologic properties of the confining unit separating the Upper and Lower Floridan aquifers were determined from packer tests and flowmeter surveys. This confining unit, which is composed of rocks of Middle Eocene age, is approximately 160 feet thick with horizontal hydraulic conductivities determined from four slug tests to range from 0.2 to 3 feet per day. Results of two separate slug tests within the middle confining unit were both 2 feet per day. Aquifer testing

  5. Airfield construction (3rd revised and enlarged edition)

    NASA Astrophysics Data System (ADS)

    Goretskii, Leonid I.; Boguslavskii, Adol'f. M.; Serebrenikov, Vadim A.; Barzdo, V. I.; Leshchitskaia, T. P.; Polosin-Nikitin, S. M.

    The principal engineering aspects of airfield construction are discussed. In particular, attention is given to the fundamental principles and organizational aspects of airfield construction; excavation work and airfield layout; construction of drainage systems; foundations and pavements; and quality control and safety engineering. The discussion also covers the operation of various support plants, including concrete production and mixing, production of asphalt-concrete mixtures and organic binders, production of structural steel and reinforced concrete components, and operation of stone quarries and gravel pits.

  6. Groundwater modeling to evaluate interaquifer leakage in the Floridan aquifer system near Hunter Army Airfield and Fort Stewart

    USGS Publications Warehouse

    Cherry, Gregory S.

    2011-01-01

    Simulations using a modified regional groundwater- flow model were used to determine the amount of leakage from the Upper Floridan aquifer (UFA) through the Lower Floridan confining unit (LFC) into the Lower Floridan aquifer (LFA) resulting from pumping about 1 million gallons per day at newly constructed LFA production wells at Hunter Army Airfield and Fort Stewart in coastal Georgia. Simulated steadystate drawdown at each of the LFA production wells closely matched observed drawdown during a 72-hour aquifer test with the observed water levels reaching steady-state by the end of the test period. However, simulated drawdown was greater than observed drawdown in the UFA because of the short duration of the aquifer test and the time required for groundwater movement through the LFC into the LFA. Steadystate simulations provide an estimate of leakage based on the long-term continuous operation of each production well. Results of model simulations indicate that interaquifer leakage accounts for 48 percent of the flow to the well at Hunter Army Airfield, and 98 percent of the flow to the well at Fort Stewart. Simulated results near the Hunter Army Airfield production well indicated that 65 percent of the leakage from the UFA to the LFA occurs within a 1-mile radius, whereas simulated results near the Fort Stewart production well indicated 80-percent leakage from the UFA to the LFA within the same radius. The greater amount of leakage to the production well near Fort Stewart can be attributed to the higher transmissivity of the UFA and higher vertical hydraulic conductivity in the LFC near the well.

  7. Degradation of deicing chemicals affects the natural redox system in airfield soils.

    PubMed

    Lissner, Heidi; Wehrer, Markus; Jartun, Morten; Totsche, Kai Uwe

    2014-01-01

    During winter operations at airports, large amounts of organic deicing chemicals (DIC) accumulate beside the runways and infiltrate into the soil during spring. To study the transport and degradation of DIC in the unsaturated zone, eight undisturbed soil cores were retrieved at Oslo airport, Norway, and installed as lysimeters at a nearby field site. Before snowmelt in 2010 and 2011, snow amended with a mix of the DICs propylene glycol (PG) and formate as well as bromide as conservative tracer was applied. Water samples were collected and analyzed until summer 2012. Water flow and solute transport varied considerably among the lysimeters but also temporally between 2010 and 2011. High infiltration rates during snowmelt resulted in the discharge of up to 51 and 82% PG in 2010 and 2011, respectively. The discharge of formate remained comparatively low, indicating its favored degradation even at freezing temperatures compared with PG. Manganese (Mn) and iron (Fe) were observed in the drainage in autumn owing to the anaerobic degradation of residual PG during summer. Our findings suggest that upper boundary conditions, i.e., snow cover and infiltration rate, and the extent of preferential flowpaths, control water flow and solute transport of bromide and PG during snowmelt. PG may therefore locally reach deeper soil regions where it may pose a risk for groundwater. In the long term, the use of DIC furthermore causes the depletion of potential electron acceptors and the transport of considerable amounts of Fe and Mn. To avoid an overload of the unsaturated zone with DIC and to maintain the natural redox system, the development of suitable remediation techniques is required. PMID:24062062

  8. Degradation of deicing chemicals affects the natural redox system in airfield soils.

    PubMed

    Lissner, Heidi; Wehrer, Markus; Jartun, Morten; Totsche, Kai Uwe

    2014-01-01

    During winter operations at airports, large amounts of organic deicing chemicals (DIC) accumulate beside the runways and infiltrate into the soil during spring. To study the transport and degradation of DIC in the unsaturated zone, eight undisturbed soil cores were retrieved at Oslo airport, Norway, and installed as lysimeters at a nearby field site. Before snowmelt in 2010 and 2011, snow amended with a mix of the DICs propylene glycol (PG) and formate as well as bromide as conservative tracer was applied. Water samples were collected and analyzed until summer 2012. Water flow and solute transport varied considerably among the lysimeters but also temporally between 2010 and 2011. High infiltration rates during snowmelt resulted in the discharge of up to 51 and 82% PG in 2010 and 2011, respectively. The discharge of formate remained comparatively low, indicating its favored degradation even at freezing temperatures compared with PG. Manganese (Mn) and iron (Fe) were observed in the drainage in autumn owing to the anaerobic degradation of residual PG during summer. Our findings suggest that upper boundary conditions, i.e., snow cover and infiltration rate, and the extent of preferential flowpaths, control water flow and solute transport of bromide and PG during snowmelt. PG may therefore locally reach deeper soil regions where it may pose a risk for groundwater. In the long term, the use of DIC furthermore causes the depletion of potential electron acceptors and the transport of considerable amounts of Fe and Mn. To avoid an overload of the unsaturated zone with DIC and to maintain the natural redox system, the development of suitable remediation techniques is required.

  9. Bird Use of Grassland Habitat Patches at a Military Airfield

    EPA Science Inventory

    In light of reported declines in grassland bird populations in North America, information about their use of airfield habitats can help inform management decisions in the context of conflicting objectives of minimizing wildlife-aircraft collisions and helping to conserve grasslan...

  10. Hydrogeologic characteristics and water quality of a confined sand unit in the surficial aquifer system, Hunter Army Airfield, Chatham County, Georgia

    USGS Publications Warehouse

    Gonthier, Gerard J.

    2012-01-01

    An 80-foot-deep well (36Q397, U.S. Geological Survey site identification 320146081073701) was constructed at Hunter Army Airfield to assess the potential of using the surficial aquifer system as a water source to irrigate a ballfield complex. A 300-foot-deep test hole was drilled beneath the ballfield complex to characterize the lithology and water-bearing characteristics of sediments above the Upper Floridan aquifer. The test hole was then completed as well 36Q397 open to a 19-foot-thick shallow, confined sand unit contained within the surficial aquifer system. A single-well, 24-hour aquifer test was performed by pumping well 36Q397 at a rate of 50 gallons per minute during July 13-14, 2011, to characterize the hydrologic properties of the shallow, confined sand unit. Two pumping events prior to the aquifer test affected water levels. Drawdown during all three pumping events and residual drawdown during recovery periods were simulated using the Theis formula on multiple changes in discharge rate. Simulated drawdown and residual drawdown match well with measured drawdown and residual drawdown using values of horizontal hydraulic conductivity and specific storage, which are typical for a confined sand aquifer. Based on the hydrologic parameters used to match simulated drawdown and residual drawdown to measured drawdown and residual drawdown, the transmissivity of the sand was determined to be about 400 feet squared per day. The horizontal hydraulic conductivity of the sand was determined to be about 20 feet per day. Analysis of a water-quality sample indicated that the water is suitable for irrigation. Sample analysis indicated a calcium-carbonate type water having a total dissolved solids concentration of 39 milligrams per liter. Specific conductance and concentrations of all analyzed constituents were below those that would be a concern for irrigation, and were below primary and secondary water-quality criteria levels.

  11. President Obama Arrives at Moffett Federal Airfield

    NASA Video Gallery

    President Barack Obama landed at Moffett Federal Airfield on Sunday, Sept. 25, 2011 for a visit to Silicon Valley. NASA Ames Research Center is the operator of Moffett Field. He was welcomed to the...

  12. WAKE ISLAND AIRFIELD TERMINAL, BUILDING 1502 LOOKING EAST WITH PHOTO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    WAKE ISLAND AIRFIELD TERMINAL, BUILDING 1502 LOOKING EAST WITH PHOTO SCALE CENTERED ON BUILDING (12/30/2008) - Wake Island Airfield, Terminal Building, West Side of Wake Avenue, Wake Island, Wake Island, UM

  13. Hydrogeology and water quality of the Floridan aquifer system and effect of Lower Floridan aquifer pumping on the Upper Floridan aquifer at Hunter Army Airfield, Chatham County, Georgia

    USGS Publications Warehouse

    Clarke, John S.; Williams, Lester J.; Cherry, Gregory C.

    2010-01-01

    Test drilling and field investigations, conducted at Hunter Army Airfield (HAAF), Chatham County, Georgia, during 2009, were used to determine the geologic, hydraulic, and water-quality characteristics of the Floridan aquifer system and to evaluate the effect of Lower Floridan aquifer (LFA) pumping on the Upper Floridan aquifer (UFA). Field investigation activities included (1) constructing a 1,168-foot (ft) test boring and well completed in the LFA, (2) collecting drill cuttings and borehole geophysical logs, (3) collecting core samples for analysis of vertical hydraulic conductivity and porosity, (4) conducting flowmeter and packer tests in the open borehole within the UFA and LFA, (5) collecting depth-integrated water samples to assess basic ionic chemistry of various water-bearing zones, and (6) conducting aquifer tests in the new LFA well and in an existing UFA well to determine hydraulic properties and assess interaquifer leakage. Using data collected at the site and in nearby areas, model simulation was used to quantify the effects of interaquifer leakage on the UFA and to determine the amount of pumping reduction required in the UFA to offset drawdown resulting from the leakage. Borehole-geophysical and flowmeter data indicate the LFA at HAAF consists of limestone and dolomitic limestone between depths of 703 and 1,080 ft, producing water from six major permeable zones: 723-731; 768-785; 818-837; 917-923; 1,027-1,052; and 1,060-1,080 ft. Data from a flowmeter survey, conducted at a pumping rate of 748 gallons per minute (gal/min), suggest that the two uppermost zones contributed 469 gal/min or 62.6 percent of the total flow during the test. The remaining four zones contributed from 1.7 to 18 percent of the total flow. Grab water samples indicate that with the exception of fluoride, constituent concentrations in the LFA increased with depth; water from the deepest interval (1,075 ft) contained chloride and sulfate concentrations of 480 and 240 milligrams per

  14. INTERIOR OF SECOND FLOOR AIRFIELD MANAGEMENT SUPERINTENDENT'S OFFICE. VIEW TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR OF SECOND FLOOR AIRFIELD MANAGEMENT SUPERINTENDENT'S OFFICE. VIEW TO SOUTHEAST - Plattsburgh Air Force Base, Base Operations Building, Idaho at Alabama Avenue, Plattsburgh, Clinton County, NY

  15. 6. VIEW OF AIRFIELD LOOKING SOUTHEAST FROM BUILDING 8200 (CONTROL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. VIEW OF AIRFIELD LOOKING SOUTHEAST FROM BUILDING 8200 (CONTROL TOWER SHOWING ALPHA TAXIWAY AND ALTERNATE RUNWAY (TAXIWAY J) IN FOREGROUND, NORTH-SIDE RUNWAY IN MIDDLE GROUND, AND ALERT AREA WITH ITS TAXIWAY IN BACKGROUND. - Loring Air Force Base, Airfield, Central portion of base, Limestone, Aroostook County, ME

  16. 5. VIEW OF AIRFIELD LOOKING EAST FROM BUILDING 8200 (CONTROL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. VIEW OF AIRFIELD LOOKING EAST FROM BUILDING 8200 (CONTROL TOWER) SHOWING TAXIWAY B CROSSING ALPHA TAXIWAY IN FOREGROUND, ALERNATE RUNWAY (TAXIWAY J) IN MIDDLE GROUND, AND NORTH-SOUTH RUNWAY IN BACKGROUND. - Loring Air Force Base, Airfield, Central portion of base, Limestone, Aroostook County, ME

  17. In-line fuzing development for tactical airfield attack munition (TAAM)

    SciTech Connect

    Morrison, J.J.

    1981-03-18

    The shock-hardened new-concept safing, arming, and in-line fuzing system developed for US Air Force modular weapons is being advanced for the Tactical Airfield Attack Munition (TAAM) as an alternate fuzing system. The high power slapper detonator system is being reduced in volume by an approximate factor of 10 and the energy by a factor of 3. In addition, the fuze has the capability of functioning after many hours of delay to provide area-denial capabilities.

  18. VIEW TO WEST FROM AIRFIELD APRON, SHOWING BASE OPERATIONS CONTROL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW TO WEST FROM AIRFIELD APRON, SHOWING BASE OPERATIONS CONTROL TOWER (FACILITY NO. 365), AND RESERVOIR HILL BEYOND Hangar NO. 9, AT RIGHT - Hamilton Field, East of Nave Drive, Novato, Marin County, CA

  19. Facility No. 175, elevation of southeast side from the airfield, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Facility No. 175, elevation of southeast side from the airfield, corner of Facility No. 176 is to the left - U.S. Naval Base, Pearl Harbor, Landplane Hangar Type, Wasp Boulevard and Gambier Bay Street, Pearl City, Honolulu County, HI

  20. Natural light illumination system.

    PubMed

    Whang, Allen Jong-Woei; Chen, Yi-Yung; Yang, Shu-Hua; Pan, Po-Hsuan; Chou, Kao-Hsu; Lee, Yu-Chi; Lee, Zong-Yi; Chen, Chi-An; Chen, Cheng-Nan

    2010-12-10

    In recent years, green energy has undergone a lot of development and has been the subject of many applications. Many research studies have focused on illumination with sunlight as a means of saving energy and creating healthy lighting. Natural light illumination systems have collecting, transmitting, and lighting elements. Today, most daylight collectors use dynamic concentrators; these include Sun tracking systems. However, this design is too expensive to be cost effective. To create a low-cost collector that can be easily installed on a large building, we have designed a static concentrator, which is prismatic and cascadable, to collect sunlight for indoor illumination. The transmission component uses a large number of optical fibers. Because optical fibers are expensive, this means that most of the cost for the system will be related to transmission. In this paper, we also use a prismatic structure to design an optical coupler for coupling n to 1. With the n-to-1 coupler, the number of optical fibers necessary can be greatly reduced. Although this new natural light illumination system can effectively guide collected sunlight and send it to the basement or to other indoor places for healthy lighting, previously there has been no way to manage the collected sunlight when lighting was not desired. To solve this problem, we have designed an optical switch and a beam splitter to control and separate the transmitted light. When replacing traditional sources, the lighting should have similar characteristics, such as intensity distribution and geometric parameters, to those of traditional artificial sources. We have designed, simulated, and optimized an illumination lightpipe with a dot pattern to redistribute the collected sunlight from the natural light illumination system such that it equals the qualities of a traditional lighting system. We also provide an active lighting module that provides lighting from the natural light illumination system or LED auxiliary

  1. Pupillary efficient lighting system

    DOEpatents

    Berman, Samuel M.; Jewett, Don L.

    1991-01-01

    A lighting system having at least two independent lighting subsystems each with a different ratio of scotopic illumination to photopic illumination. The radiant energy in the visible region of the spectrum of the lighting subsystems can be adjusted relative to each other so that the total scotopic illumination of the combined system and the total photopic illumination of the combined system can be varied independently. The dilation or contraction of the pupil of an eye is controlled by the level of scotopic illumination and because the scotopic and photopic illumination can be separately controlled, the system allows the pupil size to be varied independently of the level of photopic illumination. Hence, the vision process can be improved for a given level of photopic illumination.

  2. 14 CFR § 1204.1404 - Requests for use of NASA airfield facilities.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 5 2014-01-01 2014-01-01 false Requests for use of NASA airfield... ADMINISTRATION ADMINISTRATIVE AUTHORITY AND POLICY Use of NASA Airfield Facilities by Aircraft Not Operated for the Benefit of the Federal Government § 1204.1404 Requests for use of NASA airfield facilities....

  3. 14 CFR 1204.1404 - Requests for use of NASA airfield facilities.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Requests for use of NASA airfield... ADMINISTRATIVE AUTHORITY AND POLICY Use of NASA Airfield Facilities by Aircraft Not Operated for the Benefit of the Federal Government § 1204.1404 Requests for use of NASA airfield facilities. (a) Request for...

  4. 14 CFR 1204.1404 - Requests for use of NASA airfield facilities.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 5 2012-01-01 2012-01-01 false Requests for use of NASA airfield... ADMINISTRATIVE AUTHORITY AND POLICY Use of NASA Airfield Facilities by Aircraft Not Operated for the Benefit of the Federal Government § 1204.1404 Requests for use of NASA airfield facilities. (a) Request for...

  5. 14 CFR 1204.1404 - Requests for use of NASA airfield facilities.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 5 2013-01-01 2013-01-01 false Requests for use of NASA airfield... ADMINISTRATIVE AUTHORITY AND POLICY Use of NASA Airfield Facilities by Aircraft Not Operated for the Benefit of the Federal Government § 1204.1404 Requests for use of NASA airfield facilities. (a) Request for...

  6. 14 CFR 1204.1404 - Requests for use of NASA airfield facilities.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 5 2011-01-01 2010-01-01 true Requests for use of NASA airfield facilities... ADMINISTRATIVE AUTHORITY AND POLICY Use of NASA Airfield Facilities by Aircraft Not Operated for the Benefit of the Federal Government § 1204.1404 Requests for use of NASA airfield facilities. (a) Request for...

  7. Airfield setting of Facility Nos. 175 and 176, taken from ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Airfield setting of Facility Nos. 175 and 176, taken from north end of Ford Island Runway, with landplane hangars on the right - U.S. Naval Base, Pearl Harbor, Landplane Hangar Type, Wasp Boulevard and Gambier Bay Street, Pearl City, Honolulu County, HI

  8. Pressurized lighting system

    NASA Technical Reports Server (NTRS)

    Phlieger, G. A.

    1973-01-01

    Safe lighting assembly has been constructed for hostile environments. Assembly is ventilated by inert gas to prolong life of lamps. Lighting assembly contains control box, number of lamps connected in parallel, several pilot lights, and ventilating circuit. Control box is provided with components for monitoring and controlling flow of ventilating gas through lamp assemblies.

  9. Lighting system with thermal management system

    DOEpatents

    Arik, Mehmet; Weaver, Stanton; Stecher, Thomas; Seeley, Charles; Kuenzler, Glenn; Wolfe, Jr., Charles; Utturkar, Yogen; Sharma, Rajdeep; Prabhakaran, Satish; Icoz, Tunc

    2013-05-07

    Lighting systems having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system is configured to provide an air flow, such as a unidirectional air flow, through the housing structure in order to cool the light source. The driver electronics are configured to provide power to each of the light source and the thermal management system.

  10. Lighting system with thermal management system

    DOEpatents

    Arik, Mehmet; Weaver, Stanton Earl; Stecher, Thomas Elliot; Seeley, Charles Erklin; Kuenzler, Glenn Howard; Wolfe, Jr., Charles Franklin; Utturkar, Yogen Vishwas; Sharma, Rajdeep; Prabhakaran, Satish; Icoz, Tunc

    2015-02-24

    Lighting systems having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system is configured to provide an air flow, such as a unidirectional air flow, through the housing structure in order to cool the light source. The driver electronics are configured to provide power to each of the light source and the thermal management system.

  11. Lighting system with thermal management system

    DOEpatents

    Arik, Mehmet; Weaver, Stanton Earl; Stecher, Thomas Elliot; Seeley, Charles Erklin; Kuenzler, Glenn Howard; Wolfe, Jr, Charles Franklin; Utturkar, Yogen Vishwas; Sharma, Rajdeep; Prabhakaran, Satish; Icoz, Tunc

    2016-10-11

    Lighting systems having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system is configured to provide an air flow, such as a unidirectional air flow, through the housing structure in order to cool the light source. The driver electronics are configured to provide power to each of the light source and the thermal management system.

  12. Lighting system with thermal management system

    SciTech Connect

    Arik, Mehmet; Weaver, Stanton Earl; Stecher, Thomas Elliot; Seeley, Charles Erklin; Kuenzler, Glenn Howard; Wolfe, Jr., Charles Franklin; Utturkar, Yogen Vishwas; Sharma, Rajdeep; Prabhakaran, Satish; Icoz, Tunc

    2015-08-25

    Lighting systems having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system is configured to provide an air flow, such as a unidirectional air flow, through the housing structure in order to cool the light source. The driver electronics are configured to provide power to each of the light source and the thermal management system.

  13. Roads and Airfields I (Programed Instruction). Engineer Subcourse 64-9.

    ERIC Educational Resources Information Center

    Army Engineer School, Fort Belvoir, VA.

    The document is a programed text for a correspondence course in the planning, construction, and maintenance of military roads and airfields. There are seven lessons: construction requirements and design criteria; road reconnaissance and site selection; airfield reconnaissance and site selection; layout procedures, construction staking, and field…

  14. 32 CFR 855.7 - Conditions for use of Air Force airfields.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 6 2011-07-01 2011-07-01 false Conditions for use of Air Force airfields. 855.7 Section 855.7 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE AIRCRAFT CIVIL AIRCRAFT USE OF UNITED STATES AIR FORCE AIRFIELDS Civil Aircraft Landing Permits §...

  15. 32 CFR 855.7 - Conditions for use of Air Force airfields.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Conditions for use of Air Force airfields. 855.7 Section 855.7 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE AIRCRAFT CIVIL AIRCRAFT USE OF UNITED STATES AIR FORCE AIRFIELDS Civil Aircraft Landing Permits §...

  16. Measures to increase airfield capacity by changing aircraft runway occupancy characteristics

    NASA Technical Reports Server (NTRS)

    Gosling, G. D.; Kanafani, A.; Rockaday, S. L. M.

    1981-01-01

    Airfield capacity and aircraft runway occupancy characteristics were studied. Factors that caused runway congestion and airfield crowding were identified. Several innovations designed to alleviate the congestion are discussed. Integrated landing management, the concept that the operation of the final approach and runway should be considered in concert, was identified as underlying all of the innovations.

  17. 32 CFR 855.7 - Conditions for use of Air Force airfields.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 6 2012-07-01 2012-07-01 false Conditions for use of Air Force airfields. 855.7 Section 855.7 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE AIRCRAFT CIVIL AIRCRAFT USE OF UNITED STATES AIR FORCE AIRFIELDS Civil Aircraft Landing Permits §...

  18. 32 CFR 855.7 - Conditions for use of Air Force airfields.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 6 2013-07-01 2013-07-01 false Conditions for use of Air Force airfields. 855.7 Section 855.7 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE AIRCRAFT CIVIL AIRCRAFT USE OF UNITED STATES AIR FORCE AIRFIELDS Civil Aircraft Landing Permits §...

  19. 32 CFR 855.7 - Conditions for use of Air Force airfields.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 6 2014-07-01 2014-07-01 false Conditions for use of Air Force airfields. 855.7 Section 855.7 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE AIRCRAFT CIVIL AIRCRAFT USE OF UNITED STATES AIR FORCE AIRFIELDS Civil Aircraft Landing Permits §...

  20. Modelling of air pollution on a military airfield

    NASA Astrophysics Data System (ADS)

    Brzozowski, Krzysztof; Kotlarz, Wojciech

    The paper presents a numerical study of exhaust emission and pollutant dispersion of carbon monoxide on a military airfield. Investigations have been carried out for typical conditions of aircraft usage in the Polish Air Force Academy in Dęblin. Two different types of aircraft have been taken into account. One of them is an MI-2 helicopter, the second is a TS-11 plane. Both are used in military pilot education in Poland. Exhaust emission of CO from those aircrafts has been obtained in an experiment carried out on an engine test stand. CO concentrations have been calculated for different meteorological conditions (averaged from 5 years observations) and selected conditions of aircraft use. The finite volume method has been used to discretise the equation describing the process of pollutant dispersion. In addition, the two-cycle decomposition method has been employed to solve the set of ordinary differential equations of the first order obtained after discretisation of the advection-diffusion equation. A meteorological pre-processor, based on relationships resulting from the Monin-Obukhov theory, is used to define eddy diffusivity and the profile of air speed in the lower layer of the atmosphere. In the paper, the computer model and calculated average concentration of CO in the Dęblin airfield during typical flights are presented. The goal of the computational analysis is to predict CO pollution level in the workplace of aircraft service personnel.

  1. Emergency Lighting System

    NASA Technical Reports Server (NTRS)

    1994-01-01

    When power outages occurred at Landmark Plastic Corporation, it took seven to twelve minutes for the primary mercury lamps to cool down enough to relight and two to seven minutes for the ELS incandescent lamps to relight. Production could not resume for as much as seven minutes. An article in NASA Tech Briefs describing the capabilities of photosensing devices led Landmark employee, Steve Keller to design a system now activated by any voltage loss in the main lamp circuit and coupled with photosensing devices used to keep them on until the primary mercury lamps reach full brightness.

  2. Horticultural lighting using HID/light pipe systems

    SciTech Connect

    Bulley, N.R.; Phillips, D.

    1985-01-01

    The recent development of a light pipe makes it possible to separate a light source from the area to be illuminated. The paper reports on the light intensity and distribution for selected lamp/light pipe systems for use in commercial plant growth chambers, propagation rooms and tissue culture facilities.

  3. Restoring Detroit's Street Lighting System

    SciTech Connect

    Kinzey, Bruce R.

    2015-10-21

    The City of Detroit is undertaking a comprehensive restoration of its street lighting system that includes transitioning the existing high-pressure sodium (HPS) sources to light-emitting diode (LED). Detroit’s well-publicized financial troubles over the last several years have added many hurdles and constraints to this process. Strategies to overcome these issues have largely been successful, but have also brought some mixed results. This document provides an objective review of the circumstances surrounding the system restoration, the processes undertaken and decisions made, and the results so far.

  4. 33 CFR 127.109 - Lighting systems.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Lighting systems. 127.109 Section... Waterfront Facilities Handling Liquefied Natural Gas § 127.109 Lighting systems. (a) The marine transfer area for LNG must have a lighting system and separate emergency lighting. (b) All outdoor lighting must...

  5. 33 CFR 127.109 - Lighting systems.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Lighting systems. 127.109 Section... Waterfront Facilities Handling Liquefied Natural Gas § 127.109 Lighting systems. (a) The marine transfer area for LNG must have a lighting system and separate emergency lighting. (b) All outdoor lighting must...

  6. 33 CFR 127.109 - Lighting systems.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Lighting systems. 127.109 Section... Waterfront Facilities Handling Liquefied Natural Gas § 127.109 Lighting systems. (a) The marine transfer area for LNG must have a lighting system and separate emergency lighting. (b) All outdoor lighting must...

  7. 33 CFR 127.109 - Lighting systems.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Lighting systems. 127.109 Section... Waterfront Facilities Handling Liquefied Natural Gas § 127.109 Lighting systems. (a) The marine transfer area for LNG must have a lighting system and separate emergency lighting. (b) All outdoor lighting must...

  8. 33 CFR 127.109 - Lighting systems.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Lighting systems. 127.109 Section... Waterfront Facilities Handling Liquefied Natural Gas § 127.109 Lighting systems. (a) The marine transfer area for LNG must have a lighting system and separate emergency lighting. (b) All outdoor lighting must...

  9. President Kennedy, Vice President Johnson and Dr. von Braun at Redstone Airfield

    NASA Technical Reports Server (NTRS)

    1962-01-01

    President John F. Kennedy, Vice President Lyndon B. Johnson and Marshall Space Flight Center Director Dr. Wernher von Braun at the Redstone Arsenal Airfield, September 11, 1962. Kennedy and Johnson visited the Marshall Center to tour national space facilities.

  10. New Trends in Educational Lighting Systems.

    ERIC Educational Resources Information Center

    Murphy, Peter

    2001-01-01

    Explores technological trends for improving campus lighting, including the use of direct-indirect suspended fluorescent lighting, suspended linear lighting, high-efficiency optical systems, and occupancy and daylight sensors. (GR)

  11. Energy-efficient lighting system for television

    DOEpatents

    Cawthorne, Duane C.

    1987-07-21

    A light control system for a television camera comprises an artificial light control system which is cooperative with an iris control system. This artificial light control system adjusts the power to lamps illuminating the camera viewing area to provide only sufficient artificial illumination necessary to provide a sufficient video signal when the camera iris is substantially open.

  12. Lighting system with heat distribution face plate

    DOEpatents

    Arik, Mehmet; Weaver, Stanton Earl; Stecher, Thomas Elliot; Kuenzler, Glenn Howard; Wolfe, Jr., Charles Franklin; Li, Ri

    2013-09-10

    Lighting systems having a light source and a thermal management system are provided. The thermal management system includes synthetic jet devices, a heat sink and a heat distribution face plate. The synthetic jet devices are arranged in parallel to one and other and are configured to actively cool the lighting system. The heat distribution face plate is configured to radially transfer heat from the light source into the ambient air.

  13. 78 FR 66904 - Notice of Availability of Record of Decision for Naval Air Station Key West Airfield Operations, FL

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-07

    ... Department of the Navy Notice of Availability of Record of Decision for Naval Air Station Key West Airfield... (NAS) Key West by accomplishing the proposed action as set out in Alternative 2. Alternative 2 will... NAS Key West Airfield Operations, dated July 2013 and supporting documents. Single copies of the...

  14. 33 CFR 127.1109 - Lighting systems.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Lighting systems. 127.1109... Waterfront Facilities Handling Liquefied Hazardous Gas Design and Construction § 127.1109 Lighting systems... sunrise, must have outdoor lighting that illuminates the marine transfer area for LHG. (b) All...

  15. 33 CFR 127.1109 - Lighting systems.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Lighting systems. 127.1109... Waterfront Facilities Handling Liquefied Hazardous Gas Design and Construction § 127.1109 Lighting systems... sunrise, must have outdoor lighting that illuminates the marine transfer area for LHG. (b) All...

  16. 33 CFR 127.1109 - Lighting systems.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Lighting systems. 127.1109... Waterfront Facilities Handling Liquefied Hazardous Gas Design and Construction § 127.1109 Lighting systems... sunrise, must have outdoor lighting that illuminates the marine transfer area for LHG. (b) All...

  17. 33 CFR 127.1109 - Lighting systems.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Lighting systems. 127.1109... Waterfront Facilities Handling Liquefied Hazardous Gas Design and Construction § 127.1109 Lighting systems... sunrise, must have outdoor lighting that illuminates the marine transfer area for LHG. (b) All...

  18. 33 CFR 127.1109 - Lighting systems.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Lighting systems. 127.1109... Waterfront Facilities Handling Liquefied Hazardous Gas Design and Construction § 127.1109 Lighting systems... sunrise, must have outdoor lighting that illuminates the marine transfer area for LHG. (b) All...

  19. Advanced Light Source control system

    SciTech Connect

    Magyary, S.; Chin, M.; Cork, C.; Fahmie, M.; Lancaster, H.; Molinari, P.; Ritchie, A.; Robb, A.; Timossi, C.

    1989-03-01

    The Advanced Light Source (ALS) is a third generation 1--2 GeV synchrotron radiation source designed to provide ports for 60 beamlines. It uses a 50 MeV electron linac and 1.5 GeV, 1 Hz, booster synchrotron for injection into a 1--2 GeV storage ring. Interesting control problems are created because of the need for dynamic closed beam orbit control to eliminate interaction between the ring tuning requirements and to minimize orbit shifts due to ground vibrations. The extremely signal sensitive nature of the experiments requires special attention to the sources of electrical noise. These requirements have led to a control system design which emphasizes connectivity at the accelerator equipment end and a large I/O bandwidth for closed loop system response. Not overlooked are user friendliness, operator response time, modeling, and expert system provisions. Portable consoles are used for local operation of machine equipment. Our solution is a massively parallel system with >120 Mbits/sec I/O bandwidth and >1500 Mips computing power. At the equipment level connections are made using over 600 powerful Intelligent Local Controllers (ILC-s) mounted in 3U size Eurocard slots using fiber-optic cables between rack locations. In the control room, personal computers control and display all machine variables at a 10 Hz rate including the scope signals which are collected though the control system. Commercially available software and industry standards are used extensively. Particular attention is paid to reliability, maintainability and upgradeability. 10 refs., 11 figs.

  20. 78 FR 33965 - Establishment of Class E Airspace; Immokalee-Big Cypress Airfield, FL

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-06

    ..., establishes Class E airspace at Big Cypress Airfield, Immokalee, FL (78 FR 25384). Subsequent to publication..., 2013 (78 FR 25384) FR Doc. 2013-10214, is corrected to read ``. . . Immokalee-Big Cypress, FL''; and in... Federal Aviation Administration 14 CFR Part 71 Establishment of Class E Airspace; Immokalee-Big...

  1. 76 FR 6510 - Notice of Availability of the Final Environmental Impact Statement (FEIS) for the Airfield...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-04

    ...) for the Airfield Improvement Program at Palm Beach International Airport, West Palm Beach, FL AGENCY... of the Final Environmental Impact Statement. Location of Proposed Action: The Palm Beach International Airport (PBIA) is located in east Palm Beach County, Florida, adjacent to the City of West...

  2. Light duty utility arm baseline system description

    SciTech Connect

    Kiebel, G.R.

    1996-02-01

    This document describes the configuration of the Light Duty Utility Arm (LDUA) Baseline System. The baseline system is the initial configuration of the LDUA system that will be qualified for hot deployment in Hanford single shell underground storage tanks.

  3. Lighting for remote viewing systems

    SciTech Connect

    Draper, J.V.

    1984-01-01

    Scenes viewed by television do not provide the same channels of information for judgment of distances as scenes viewed directly, since television eliminates or degrades several depth perception cues. However, it may be possible to improve depth perception of televised scenes by enhancing the information available through depth cues that are available from lighting. A literature survey and expert opinions were integrated to design a remote lighting arrangement which could enhance depth perception of operators performing remote handling operations. This paper describes the lighting arrangement and discusses some of its advantages and disadvantages.

  4. Lighting for remote viewing systems

    SciTech Connect

    Draper, J.V.

    1984-01-01

    Scenes viewed by television do not provide the same channels of information for judgement of distances as scenes viewed directly, since television eliminates or degrades several depth perception cues. However, it may be possible to improve depth perception of televised scenes by enhancing the information available through depth cues that are available from lighting. A literature survey and expert opinions were integrated to design a remote lighting arrangement which could enhance depth perception of operators performing remote handling operations. This paper describes the lighting arrangement and discusses some of its advantages and disadvantages. 10 references, 2 figures.

  5. Lighting for remote viewing systems

    SciTech Connect

    Draper, J.V.

    1984-01-01

    Scenes viewed by television do not provide the same channels of information for judgment of distances as scenes viewed directly, since television eliminates or degrades several depth perception cues. However, it may be possible to improve depth perception of televised scenes by enhancing the information available through depth cues that are available from lighting. A literature survey and expert opinions were integrated to design a remote lighting arrangement which could enhance depth perception of operators performing remote handling operations. This paper describes the lighting arrangement and discusses some of its advantages and disadvantages. 10 references, 2 figures.

  6. Wind Advisory System

    NASA Technical Reports Server (NTRS)

    Curto, Paul A. (Inventor); Brown, Gerald E. (Inventor); Zysko, Jan A. (Inventor)

    2001-01-01

    The present invention is a two-part wind advisory system comprising a ground station at an airfield and an airborne unit placed inside an aircraft. The ground station monitors wind conditions (wind speed, wind direction, and wind gust) at the airfield and transmits the wind conditions and an airfield ID to the airborne unit. The airborne unit identifies the airfield by comparing the received airfield ID with airfield IDs stored in a database. The airborne unit also calculates the headwind and crosswind for each runway in both directions at the airfield using the received wind conditions and runway information stored in the database. The airborne unit then determines a recommended runway for takeoff and landing operations of the aircraft based on th runway having the greatest headwind value and displays the airfield ID, wind conditions, and recommended runway to the pilot. Another embodiment of the present invention includes a wireless internet based airborne unit in which the airborne unit can receive the wind conditions from the ground station over the internet.

  7. Hybrid solar lighting distribution systems and components

    DOEpatents

    Muhs, Jeffrey D.; Earl, Dennis D.; Beshears, David L.; Maxey, Lonnie C.; Jordan, John K.; Lind, Randall F.

    2011-07-05

    A hybrid solar lighting distribution system and components having at least one hybrid solar concentrator, at least one fiber receiver, at least one hybrid luminaire, and a light distribution system operably connected to each hybrid solar concentrator and each hybrid luminaire. A controller operates all components.

  8. Hybrid solar lighting systems and components

    DOEpatents

    Muhs, Jeffrey D.; Earl, Dennis D.; Beshears, David L.; Maxey, Lonnie C.; Jordan, John K.; Lind, Randall F.

    2007-06-12

    A hybrid solar lighting system and components having at least one hybrid solar concentrator, at least one fiber receiver, at least one hybrid luminaire, and a light distribution system operably connected to each hybrid solar concentrator and each hybrid luminaire. A controller operates each component.

  9. Representation of chromatic distribution for lighting system

    NASA Astrophysics Data System (ADS)

    Rossi, Maurizio; Musante, Fulvio

    2015-01-01

    For the luminaire manufacturer, the measurement of the lighting intensity distribution (LID) emitted by lighting fixture is based on photometry. So light is measured as an achromatic value of intensity and there is no the possibility to discriminate the measurement of white vs. colored light. At the Laboratorio Luce of Politecnico di Milano a new instrument for the measurement of spectral radiant intensities distribution for lighting system has been built: the goniospectra- radiometer. This new measuring tool is based on a traditional mirror gonio-photometer with a CCD spectraradiometer controlled by a PC. Beside the traditional representation of photometric distribution we have introduced a new representation where, in addition to the information about the distribution of luminous intensity in space, new details about the chromaticity characteristic of the light sources have been implemented. Some of the results of this research have been applied in developing and testing a new line of lighting system "My White Light" (the research project "Light, Environment and Humans" funded in the Italian Lombardy region Metadistretti Design Research Program involving Politecnico di Milano, Artemide, Danese, and some other SME of the Lighting Design district), giving scientific notions and applicative in order to support the assumption that colored light sources can be used for the realization of interior luminaries that, other than just have low power consumption and long life, may positively affect the mood of people.

  10. LED Context Lighting System in Residential Areas

    PubMed Central

    Im, Kyoung-Mi

    2014-01-01

    As issues of environment and energy draw keen interest around the globe due to such problems as global warming and the energy crisis, LED with high optical efficiency is brought to the fore as the next generation lighting. In addition, as the national income level gets higher and life expectancy is extended, interest in the enhancement of life quality is increasing. Accordingly, the trend of lightings is changing from mere adjustment of light intensity to system lighting in order to enhance the quality of one's life as well as reduce energy consumption. Thus, this study aims to design LED context lighting system that automatically recognizes the location and acts of a user in residential areas and creates an appropriate lighting environment. The proposed system designed in this study includes three types of processing: first, the creation of a lighting environment index suitable for the user's surroundings and lighting control scenarios and second, it measures and analyzes the optical characteristics that change depending on the dimming control of lighting and applies them to the index. Lastly, it adopts PIR, piezoelectric, and power sensor to grasp the location and acts of the user and create a lighting environment suitable for the current context. PMID:25101325

  11. LED context lighting system in residential areas.

    PubMed

    Kwon, Sook-Youn; Im, Kyoung-Mi; Lim, Jae-Hyun

    2014-01-01

    As issues of environment and energy draw keen interest around the globe due to such problems as global warming and the energy crisis, LED with high optical efficiency is brought to the fore as the next generation lighting. In addition, as the national income level gets higher and life expectancy is extended, interest in the enhancement of life quality is increasing. Accordingly, the trend of lightings is changing from mere adjustment of light intensity to system lighting in order to enhance the quality of one's life as well as reduce energy consumption. Thus, this study aims to design LED context lighting system that automatically recognizes the location and acts of a user in residential areas and creates an appropriate lighting environment. The proposed system designed in this study includes three types of processing: first, the creation of a lighting environment index suitable for the user's surroundings and lighting control scenarios and second, it measures and analyzes the optical characteristics that change depending on the dimming control of lighting and applies them to the index. Lastly, it adopts PIR, piezoelectric, and power sensor to grasp the location and acts of the user and create a lighting environment suitable for the current context. PMID:25101325

  12. Engineering task plan for purged light system

    SciTech Connect

    BOGER, R.M.

    1999-05-11

    A purged, closed circuit television system is currently used to video inside of waste tanks. The video is used to support inspection and assessment of the tank interiors, waste residues, and deployed hardware. The system is also used to facilitate deployment of new equipment. A new light source has been requested by Characterization Project Operations (CPO) for the video system. The current light used is mounted on the camera and provides 75 watts of light, which is insufficient for clear video. Other light sources currently in use on the Hanford site either can not be deployed in a 4-inch riser or do not meet the ignition source controls. The scope of this Engineering Task Plan is to address all activities associated with the specification and procurement of a light source for use with the existing CPO video equipment. The installation design change to tank farm facilities is not within the scope of this ETP.

  13. Jebel Ali Hotel PV lighting systems

    SciTech Connect

    Ellis, M.

    1984-05-01

    A large stand-alone PV lighting project was installed in June 1983 at the Jebel Ali Hotel in Dubai, United Arab Emirates. A high mast lighting system provides illumination for a 130 meter diameter traffic roundabout. The high mast system is powered by a 15 kilowatt peak array of Mobil Solar ribbon PV modules. Along the 700 meter access road leading to the hotel entrance, twenty-one PV powered streetlights provide low-level lighting. Each streetlight consists of a 20 watt fluorescent tube powered by two 35 Wp modules. Operation of both systems is completely automatic. Design, installation, and operating experience to date are reviewed.

  14. Lighting.

    SciTech Connect

    United States. Bonneville Power Administration.

    1992-09-01

    Since lighting accounts for about one-third of the energy used in commercial buildings, there is opportunity to conserve. There are two ways to reduce lighting energy use: modify lighting systems so that they used less electricity and/or reduce the number of hours the lights are used. This booklet presents a number of ways to do both. Topics covered include: reassessing lighting levels, reducing lighting levels, increasing bulb & fixture efficiency, using controls to regulate lighting, and taking advantage of daylight.

  15. A model for plant lighting system selection

    NASA Technical Reports Server (NTRS)

    Ciolkosz, D. E.; Albright, L. D.; Sager, J. C.; Langhans, R. W.

    2002-01-01

    A decision model is presented that compares lighting systems for a plant growth scenario and chooses the most appropriate system from a given set of possible choices. The model utilizes a Multiple Attribute Utility Theory approach, and incorporates expert input and performance simulations to calculate a utility value for each lighting system being considered. The system with the highest utility is deemed the most appropriate system. The model was applied to a greenhouse scenario, and analyses were conducted to test the model's output for validity. Parameter variation indicates that the model performed as expected. Analysis of model output indicates that differences in utility among the candidate lighting systems were sufficiently large to give confidence that the model's order of selection was valid.

  16. Reflector system for a lighting fixture

    DOEpatents

    Siminovitch, Michael J.; Page, Erik; Gould, Carl T.

    2001-01-01

    Disclosed herein is a reflector system for a lighting fixture having a illumination source surrounded by an envelope. The reflector system includes a first reflector surrounding the illumination source. The reflector system also includes a second reflector which is non-contiguous with the first reflector and which surrounds the illumination source. The illumination source creates light rays which are reflected by the first and second reflectors. The first reflector directs light rays toward the center line of the fixture. However, the reflected rays despite being so reflected do not substantially intersect the envelope. The reflected light rays from the second reflector being directed so that they diverge from the center line of the fixture avoiding intersection with the semi-transparent envelope.

  17. Reflector system for a lighting fixture

    DOEpatents

    Siminovitch, Michael J.; Page, Erik; Gould, Carl T.

    1998-01-01

    Disclosed herein is a reflector system for a lighting fixture having a illumination source surrounded by an envelope. The reflector system includes a first reflector surrounding the illumination source. The reflector system also includes a second reflector which is non-contiguous with the first reflector and which surrounds the illumination source. The illumination source creates light rays which are reflected by the first and second reflectors. The first reflector directs light rays toward the center line of the fixture. However, the reflected rays despite being so reflected do not substantially intersect the envelope. The reflected light rays from the second reflector being directed so that they diverge from the center line of the fixture avoiding intersection with the semi-transparent envelope.

  18. Reflector system for a lighting fixture

    DOEpatents

    Siminovitch, M.J.; Page, E.; Gould, C.T.

    1998-09-08

    Disclosed herein is a reflector system for a lighting fixture having a illumination source surrounded by an envelope. The reflector system includes a first reflector surrounding the illumination source. The reflector system also includes a second reflector which is non-contiguous with the first reflector and which surrounds the illumination source. The illumination source creates light rays which are reflected by the first and second reflectors. The first reflector directs light rays toward the center line of the fixture. However, the reflected rays despite being so reflected do not substantially intersect the envelope. The reflected light rays from the second reflector being directed so that they diverge from the center line of the fixture avoiding intersection with the semi-transparent envelope. 5 figs.

  19. Matrix light and pixel light: optical system architecture and requirements to the light source

    NASA Astrophysics Data System (ADS)

    Spinger, Benno; Timinger, Andreas L.

    2015-09-01

    Modern Automotive headlamps enable improved functionality for more driving comfort and safety. Matrix or Pixel light headlamps are not restricted to either pure low beam functionality or pure high beam. Light in direction of oncoming traffic is selectively switched of, potential hazard can be marked via an isolated beam and the illumination on the road can even follow a bend. The optical architectures that enable these advanced functionalities are diverse. Electromechanical shutters and lens units moved by electric motors were the first ways to realize these systems. Switching multiple LED light sources is a more elegant and mechanically robust solution. While many basic functionalities can already be realized with a limited number of LEDs, an increasing number of pixels will lead to more driving comfort and better visibility. The required optical system needs not only to generate a desired beam distribution with a high angular dynamic, but also needs to guarantee minimal stray light and cross talk between the different pixels. The direct projection of the LED array via a lens is a simple but not very efficient optical system. We discuss different optical elements for pre-collimating the light with minimal cross talk and improved contrast between neighboring pixels. Depending on the selected optical system, we derive the basic light source requirements: luminance, surface area, contrast, flux and color homogeneity.

  20. Pilot Evaluations of Runway Status Light System

    NASA Technical Reports Server (NTRS)

    Young, Steven D.; Wills, Robert W.; Smith, R. Marshall

    1996-01-01

    This study focuses on use of the Transport Systems Research Vehicle (TSRV) Simulator at the Langley Research Center to obtain pilot opinion and input on the Federal Aviation Administration's Runway Status Light System (RWSL) prior to installation in an operational airport environment. The RWSL has been designed to reduce the likelihood of runway incursions by visually alerting pilots when a runway is occupied. Demonstrations of the RWSL in the TSRV Simulator allowed pilots to evaluate the system in a realistic cockpit environment.

  1. 14 CFR 27.1401 - Anticollision light system.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Anticollision light system. 27.1401 Section... AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Equipment Lights § 27.1401 Anticollision light system. (a... light system that— (1) Consists of one or more approved anticollision lights located so that...

  2. 14 CFR 27.1401 - Anticollision light system.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Anticollision light system. 27.1401 Section... AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Equipment Lights § 27.1401 Anticollision light system. (a... light system that— (1) Consists of one or more approved anticollision lights located so that...

  3. 14 CFR 29.1401 - Anticollision light system.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Anticollision light system. 29.1401 Section... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Equipment Lights § 29.1401 Anticollision light system. (a... light system that— (1) Consists of one or more approved anticollision lights located so that...

  4. 14 CFR 29.1401 - Anticollision light system.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Anticollision light system. 29.1401 Section... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Equipment Lights § 29.1401 Anticollision light system. (a... light system that— (1) Consists of one or more approved anticollision lights located so that...

  5. 14 CFR 23.1385 - Position light system installation.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Position light system installation. 23.1385... Lights § 23.1385 Position light system installation. (a) General. Each part of each position light system... requirements of §§ 23.1387 through 23.1397. (b) Left and right position lights. Left and right position...

  6. 14 CFR 29.1401 - Anticollision light system.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Anticollision light system. 29.1401 Section... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Equipment Lights § 29.1401 Anticollision light system. (a... light system that— (1) Consists of one or more approved anticollision lights located so that...

  7. 14 CFR 23.1385 - Position light system installation.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Position light system installation. 23.1385... Lights § 23.1385 Position light system installation. (a) General. Each part of each position light system... requirements of §§ 23.1387 through 23.1397. (b) Left and right position lights. Left and right position...

  8. 14 CFR 27.1401 - Anticollision light system.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Anticollision light system. 27.1401 Section... AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Equipment Lights § 27.1401 Anticollision light system. (a... light system that— (1) Consists of one or more approved anticollision lights located so that...

  9. 14 CFR 23.1385 - Position light system installation.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Position light system installation. 23.1385... Lights § 23.1385 Position light system installation. (a) General. Each part of each position light system... requirements of §§ 23.1387 through 23.1397. (b) Left and right position lights. Left and right position...

  10. 14 CFR 27.1401 - Anticollision light system.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Anticollision light system. 27.1401 Section... AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Equipment Lights § 27.1401 Anticollision light system. (a... light system that— (1) Consists of one or more approved anticollision lights located so that...

  11. Microelectromechanical Systems (MEMS) Broadband Light Source Developed

    NASA Technical Reports Server (NTRS)

    Tuma, Margaret L.

    2003-01-01

    A miniature, low-power broadband light source has been developed for aerospace applications, including calibrating spectrometers and powering miniature optical sensors. The initial motivation for this research was based on flight tests of a Fabry-Perot fiberoptic temperature sensor system used to detect aircraft engine exhaust gas temperature. Although the feasibility of the sensor system was proven, the commercial light source optically powering the device was identified as a critical component requiring improvement. Problems with the light source included a long stabilization time (approximately 1 hr), a large amount of heat generation, and a large input electrical power (6.5 W). Thus, we developed a new light source to enable the use of broadband optical sensors in aerospace applications. Semiconductor chip-based light sources, such as lasers and light-emitting diodes, have a relatively narrow range of emission wavelengths in comparison to incandescent sources. Incandescent light sources emit broadband radiation from visible to infrared wavelengths; the intensity at each wavelength is determined by the filament temperature and the materials chosen for the filament and the lamp window. However, present commercial incandescent light sources are large in size and inefficient, requiring several watts of electrical power to obtain the desired optical power, and they emit a large percentage of the input power as heat that must be dissipated. The miniature light source, developed jointly by the NASA Glenn Research Center, the Jet Propulsion Laboratory, and the Lighting Innovations Institute, requires one-fifth the electrical input power of some commercial light sources, while providing similar output light power that is easily coupled to an optical fiber. Furthermore, it is small, rugged, and lightweight. Microfabrication technology was used to reduce the size, weight, power consumption, and potential cost-parameters critical to future aerospace applications. This chip

  12. Universal light-switchable gene promoter system

    DOEpatents

    Quail, Peter H.; Huq, Enamul; Tepperman, James; Sato, Sae

    2005-02-22

    An artificial promoter system that can be fused upstream of any desired gene enabling reversible induction or repression of the expression of the gene at will in any suitable host cell or organisms by light is described. The design of the system is such that a molecule of the plant photoreceptor phytochrome is targeted to the specific DNA binding site in the promoter by a protein domain that is fused to the phytochrome and that specifically recognizes this binding site. This bound phytochrome, upon activation by light, recruits a second fusion protein consisting of a protein that binds to phytochrome only upon light activation and a transcriptional activation domain that activates expression of the gene downstream of the promoter.

  13. Kaleidoscopic light feedback for television systems

    NASA Technical Reports Server (NTRS)

    Davis, J. G.; Woods, J. M.

    1971-01-01

    Technique generates special effects for broadcast television to study effects of light feedback on television systems. Signals are produced for tape recording, broadcasting, or displaying on black-and-white or color monitors. The patterns have from three to eight sides and expand, contract, or rotate at various speeds.

  14. 14 CFR 25.1385 - Position light system installation.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ....1397. (b) Forward position lights. Forward position lights must consist of a red and a green light... airplane in the normal flying position, the red light is on the left side and the green light is on the... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Position light system installation....

  15. 14 CFR 29.1385 - Position light system installation.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ....1397. (b) Forward position lights. Forward position lights must consist of a red and a green light... rotorcraft in the normal flying position, the red light is on the left side, and the green light is on the... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Position light system installation....

  16. 14 CFR 25.1385 - Position light system installation.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ....1397. (b) Forward position lights. Forward position lights must consist of a red and a green light... airplane in the normal flying position, the red light is on the left side and the green light is on the... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Position light system installation....

  17. 14 CFR 27.1385 - Position light system installation.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ....1397. (b) Forward position lights. Forward position lights must consist of a red and a green light... rotorcraft in the normal flying position, the red light is on the left side and the green light is on the... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Position light system installation....

  18. 14 CFR 27.1385 - Position light system installation.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ....1397. (b) Forward position lights. Forward position lights must consist of a red and a green light... rotorcraft in the normal flying position, the red light is on the left side and the green light is on the... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Position light system installation....

  19. 14 CFR 29.1385 - Position light system installation.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ....1397. (b) Forward position lights. Forward position lights must consist of a red and a green light... rotorcraft in the normal flying position, the red light is on the left side, and the green light is on the... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Position light system installation....

  20. Research on integrating sphere low-light level stress system

    NASA Astrophysics Data System (ADS)

    Yang, Donglin; Feng, Dawei

    2010-10-01

    Low-light level night vision device must be assessed by light stress reliability test in the design approval testing and production approval testing. The low-light level stress environment is the key to light stress reliability test on Low-light level night vision device. This paper studies the actual working environment of Low-light level night vision device from the aspects of night sky spectrum of nature light and illumination, and designs a low-light level stress system. The system consists of double-integrating-sphere light source, light stress automatic switching device, collimator, monitoring and control system for light stress. The system uses a total light source with radiation structure to improve the light efficiency, solve the question of light stress consistency, achieve a typical night-day simulation of the environment and the monitoring and control of the whole process.

  1. Illuminating system and method for specialized and decorative lighting using liquid light guides

    DOEpatents

    Zorn, Carl J.; Kross, Brian J.; Majewski, Stanislaw; Wojcik, Randolph F.

    1998-01-01

    The present invention comprises an illumination system for specialized decorative lighting including a light source, a flexible plastic tube sheath for distributing the light to a remote location, a transparent liquid core filling the tube that has an index of refraction greater than that of the plastic tube and an arrangement where light coupled from the light source is caused to leak from the liquid light guide at desired locations for the purposes of specialized lighting, such as underwater illumination in swimming pools.

  2. Light armored vehicle reconnaissance and surveillance system

    NASA Astrophysics Data System (ADS)

    Barbeau, Nicolas R.

    1994-10-01

    The Canadian Department of National Defence (DND) has established a requirement for a fleet of reconnaissance vehicles equipped with a modern surveillance system to be used in a wide variety of scenarios. This includes conventional operations within NATO, contingency operations in troubled areas as well as UN peacekeeping missions. As such, the Light Armored Vehicles Reconnaissance and Surveillance System will be the first 24 hour all- weather reconnaissance system integrated into a combat vehicle. This paper intends to describe how the operational requirements defined by DND were translated into sensor and system requirements. After a summary of the current configuration, it focuses on product pre-planned improvements and future needs.

  3. A light-triggered protein secretion system.

    PubMed

    Chen, Daniel; Gibson, Emily S; Kennedy, Matthew J

    2013-05-13

    Optical control of protein interactions has emerged as a powerful experimental paradigm for manipulating and studying various cellular processes. Tools are now available for controlling a number of cellular functions, but some fundamental processes, such as protein secretion, have been difficult to engineer using current optical tools. Here we use UVR8, a plant photoreceptor protein that forms photolabile homodimers, to engineer the first light-triggered protein secretion system. UVR8 fusion proteins were conditionally sequestered in the endoplasmic reticulum, and a brief pulse of light triggered robust forward trafficking through the secretory pathway to the plasma membrane. UVR8 was not responsive to excitation light used to image cyan, green, or red fluorescent protein variants, allowing multicolor visualization of cellular markers and secreted protein cargo as it traverses the cellular secretory pathway. We implemented this novel tool in neurons to demonstrate restricted, local trafficking of secretory cargo near dendritic branch points.

  4. Light Machines Operator Performance Support System

    SciTech Connect

    Bohley, M.C.

    1998-06-15

    The objective of this project was to create a multimedia operator performance support system (OPSS) shell that would provide a framework for delivering appropriate information to the student/novice machine tool user just when needed and in the most appropriate form. In addition, the program was designed so that it could be expanded and further developed by Light Machines personnel. The expertise of AlliedSignal Federal Manufacturing and Technologies (ASFM and T) in the areas of performance support system design and multimedia creation was employed to create the most user-friendly graphical user interface (GUI) while providing access to key topical areas. Light Machines provided a subject matter expert from their technical services group in order to provide the needed information for structuring the OPSS shell. They also provided a Benchman VMC 4000 machine tool at the ASFM and T New Mexico location as well as specific instruction on the safe and effective use of that machine tool.

  5. 14 CFR 23.1401 - Anticollision light system.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Anticollision light system. 23.1401 Section... AIRWORTHINESS STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Equipment Lights § 23.1401 Anticollision light system. (a) General. The airplane must have an anticollision light system that: (1)...

  6. 14 CFR 25.1401 - Anticollision light system.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Anticollision light system. 25.1401 Section... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Equipment Lights § 25.1401 Anticollision light system. (a) General. The airplane must have an anticollision light system that— (1) Consists of one or more...

  7. 14 CFR 25.1401 - Anticollision light system.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Anticollision light system. 25.1401 Section... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Equipment Lights § 25.1401 Anticollision light system. (a) General. The airplane must have an anticollision light system that— (1) Consists of one or more...

  8. 14 CFR 23.1401 - Anticollision light system.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Anticollision light system. 23.1401 Section... AIRWORTHINESS STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Equipment Lights § 23.1401 Anticollision light system. (a) General. The airplane must have an anticollision light system that: (1)...

  9. 14 CFR 23.1401 - Anticollision light system.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Anticollision light system. 23.1401 Section... AIRWORTHINESS STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Equipment Lights § 23.1401 Anticollision light system. (a) General. The airplane must have an anticollision light system that: (1)...

  10. 14 CFR 25.1385 - Position light system installation.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Position light system installation. 25.1385... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Equipment Lights § 25.1385 Position light system installation. (a) General. Each part of each position light system must meet the...

  11. 14 CFR 27.1385 - Position light system installation.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Position light system installation. 27.1385... AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Equipment Lights § 27.1385 Position light system installation. (a) General. Each part of each position light system must meet the...

  12. 14 CFR 23.1401 - Anticollision light system.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Anticollision light system. 23.1401 Section... AIRWORTHINESS STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Equipment Lights § 23.1401 Anticollision light system. (a) General. The airplane must have an anticollision light system that: (1)...

  13. 14 CFR 25.1401 - Anticollision light system.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Anticollision light system. 25.1401 Section... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Equipment Lights § 25.1401 Anticollision light system. (a) General. The airplane must have an anticollision light system that— (1) Consists of one or more...

  14. 14 CFR 25.1401 - Anticollision light system.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Anticollision light system. 25.1401 Section... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Equipment Lights § 25.1401 Anticollision light system. (a) General. The airplane must have an anticollision light system that— (1) Consists of one or more...

  15. 14 CFR 25.1385 - Position light system installation.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Position light system installation. 25.1385... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Equipment Lights § 25.1385 Position light system installation. (a) General. Each part of each position light system must meet the...

  16. 14 CFR 29.1385 - Position light system installation.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Position light system installation. 29.1385... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Equipment Lights § 29.1385 Position light system installation. (a) General. Each part of each position light system must meet the...

  17. 14 CFR 25.1401 - Anticollision light system.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... the system, that is, the number of light sources, beam width, speed of rotation, and other... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Anticollision light system. 25.1401 Section... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Equipment Lights § 25.1401 Anticollision light system....

  18. A lighting metric for quantitative evaluation of accent lighting systems

    NASA Astrophysics Data System (ADS)

    Acholo, Cyril O.; Connor, Kenneth A.; Radke, Richard J.

    2014-09-01

    Accent lighting is critical for artwork and sculpture lighting in museums, and subject lighting for stage, Film and television. The research problem of designing effective lighting in such settings has been revived recently with the rise of light-emitting-diode-based solid state lighting. In this work, we propose an easy-to-apply quantitative measure of the scene's visual quality as perceived by human viewers. We consider a well-accent-lit scene as one which maximizes the information about the scene (in an information-theoretic sense) available to the user. We propose a metric based on the entropy of the distribution of colors, which are extracted from an image of the scene from the viewer's perspective. We demonstrate that optimizing the metric as a function of illumination configuration (i.e., position, orientation, and spectral composition) results in natural, pleasing accent lighting. We use a photorealistic simulation tool to validate the functionality of our proposed approach, showing its successful application to two- and three-dimensional scenes.

  19. A sonic net excludes birds from an airfield: implications for reducing bird strike and crop losses.

    PubMed

    Swaddle, John P; Moseley, Dana L; Hinders, Mark K; Smith, Elizabeth P

    2016-03-01

    Collisions between birds and aircraft cause billions of dollars of damages annually to civil, commercial, and military aviation. Yet technology to reduce bird strike is not generally effective, especially over longer time periods. Previous information from our lab indicated that filling an area with acoustic noise, which masks important communication channels for birds, can displace European Starlings (Sturnus vulgaris) from food sources. Here we deployed a spatially controlled noise (termed a "sonic net"), designed to overlap with the frequency range of bird vocalizations, at an airfield. By conducting point counts, we monitored the presence of birds for four weeks before deployment of our sonic net, and for four weeks during deployment. We found an 82% reduction in bird presence in the sonic net area compared with change in the reference areas. This effect was as strong in the fourth week of exposure as in the first week. We also calculated the potential costs avoided resulting from this exclusion. We propose that spatially controlled acoustic manipulations that mask auditory communication for birds may be an effective long term and fairly benign way of excluding problem birds from areas of socioeconomic importance, such as airfields, agricultural sites, and commercial properties. PMID:27209777

  20. A sonic net excludes birds from an airfield: implications for reducing bird strike and crop losses.

    PubMed

    Swaddle, John P; Moseley, Dana L; Hinders, Mark K; Smith, Elizabeth P

    2016-03-01

    Collisions between birds and aircraft cause billions of dollars of damages annually to civil, commercial, and military aviation. Yet technology to reduce bird strike is not generally effective, especially over longer time periods. Previous information from our lab indicated that filling an area with acoustic noise, which masks important communication channels for birds, can displace European Starlings (Sturnus vulgaris) from food sources. Here we deployed a spatially controlled noise (termed a "sonic net"), designed to overlap with the frequency range of bird vocalizations, at an airfield. By conducting point counts, we monitored the presence of birds for four weeks before deployment of our sonic net, and for four weeks during deployment. We found an 82% reduction in bird presence in the sonic net area compared with change in the reference areas. This effect was as strong in the fourth week of exposure as in the first week. We also calculated the potential costs avoided resulting from this exclusion. We propose that spatially controlled acoustic manipulations that mask auditory communication for birds may be an effective long term and fairly benign way of excluding problem birds from areas of socioeconomic importance, such as airfields, agricultural sites, and commercial properties.

  1. Light extinction in polydisperse particulate systems.

    PubMed

    Casperson, L W

    1977-12-01

    Analytic methods are developed for determining the attenuation characteristics of light beams propagating through ensembles of scattering particles including those with complex index of refraction. The methods are applicable to a wide range of practical particulate systems, and the results are expressed explicitly in terms of elementary functions. Propagation through fog and clouds is considered as an example, and it is found that absorption by the liquid lengths. water in such ensembles affects strongly the extinction for ir wave-lengths.

  2. Enhanced detection of LED runway/approach lights for EVS

    NASA Astrophysics Data System (ADS)

    Kerr, J. Richard

    2008-04-01

    The acquisition of approach and runway lights by an imager is critical to landing-credit operations with EVS. Using a GPS clock, LED sources are pulsed at one-half the EVS video rate of 60 Hz or more. The camera then uses synchronous (lock-in) detection to store the imaged lights in alternate frames, with digital subtraction of the background for each respective frame-pair. Range and weather penetration, limited only by detector background shot-noise (or camera system noise at night), substantially exceed that of the human eye. An alternative is the use of short-wave infrared cameras with eyesafe laser diode emitters. Also, runway identification may be encoded on the pulses. With standardized cameras and emitters, an "instrument qualified visual range" may be established. The concept extends to portable beacons at austere airfields, and to see-and-avoid sensing of other aircraft including UAVs.

  3. TPB-coated light guides for liquid argon TPC light detection systems

    NASA Astrophysics Data System (ADS)

    Ignarra, C. M.

    2013-10-01

    Light detection systems in Liquid Argon Time Projection Chambers (LArTPCs) require the detection of the 128 nm light produced during argon scintillation. Most detectors use Tetraphenyl Butadiene (TPB) to shift the wavelength of the light into a range visible to Photomultiplier Tubes (PMTs). These proceedings summarize characterizations of light-guides coated with a matrix of TPB in UV transmitting acrylic which are more compact than existing LArTPC light collection systems.

  4. 14 CFR 93.343 - Requirements for aircraft operations to or from College Park Airport, Potomac Airfield, or...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... in 49 CFR part 1562, subpart A; (2) Before departing, the pilot files an IFR or DC FRZ or DC SFRA... from College Park Airport, Potomac Airfield, or Washington Executive/Hyde Field Airport. 93.343 Section... Special Flight Rules Area § 93.343 Requirements for aircraft operations to or from College Park...

  5. 14 CFR 93.343 - Requirements for aircraft operations to or from College Park Airport, Potomac Airfield, or...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... in 49 CFR part 1562, subpart A; (2) Before departing, the pilot files an IFR or DC FRZ or DC SFRA... from College Park Airport, Potomac Airfield, or Washington Executive/Hyde Field Airport. 93.343 Section... Special Flight Rules Area § 93.343 Requirements for aircraft operations to or from College Park...

  6. 14 CFR 93.343 - Requirements for aircraft operations to or from College Park Airport, Potomac Airfield, or...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... in 49 CFR part 1562, subpart A; (2) Before departing, the pilot files an IFR or DC FRZ or DC SFRA... from College Park Airport, Potomac Airfield, or Washington Executive/Hyde Field Airport. 93.343 Section... Special Flight Rules Area § 93.343 Requirements for aircraft operations to or from College Park...

  7. 14 CFR 93.343 - Requirements for aircraft operations to or from College Park Airport, Potomac Airfield, or...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... in 49 CFR part 1562, subpart A; (2) Before departing, the pilot files an IFR or DC FRZ or DC SFRA... from College Park Airport, Potomac Airfield, or Washington Executive/Hyde Field Airport. 93.343 Section... Special Flight Rules Area § 93.343 Requirements for aircraft operations to or from College Park...

  8. 14 CFR 93.343 - Requirements for aircraft operations to or from College Park Airport, Potomac Airfield, or...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... in 49 CFR part 1562, subpart A; (2) Before departing, the pilot files an IFR or DC FRZ or DC SFRA... from College Park Airport, Potomac Airfield, or Washington Executive/Hyde Field Airport. 93.343 Section... Special Flight Rules Area § 93.343 Requirements for aircraft operations to or from College Park...

  9. Spectrally balanced chromatic landing approach lighting system

    NASA Technical Reports Server (NTRS)

    Chase, W. D. (Inventor)

    1981-01-01

    Red warning lights delineate the runway approach with additional blue lights juxtaposed with the red lights such that the red lights are chromatically balanced. The red/blue point light sources result in the phenomenon that the red lights appear in front of the blue lights with about one and one-half times the diameter of the blue. To a pilot observing these lights along a glide path, those red lights directly below appear to be nearer than the blue lights. For those lights farther away seen in perspective at oblique angles, the red lights appear to be in a position closer to the pilot and hence appear to be above the corresponding blue lights. This produces a very pronounced three dimensional effect referred to as chromostereopsis which provides valuable visual cues to enable the pilot to perceive his actual position above the ground and the actual distance to the runway.

  10. 14 CFR 29.1401 - Anticollision light system.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... number of light sources, beam width, speed of rotation, and other characteristics, must give an effective... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Anticollision light system. 29.1401 Section... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Equipment Lights § 29.1401 Anticollision light system....

  11. Rapid-response, light-exposure control system

    NASA Technical Reports Server (NTRS)

    Kuehl, D. K.; Zwillenberg, M. L.

    1968-01-01

    Rapid-response electro-optical, light exposure control system, will maintain the light reaching a camera film or other light-sensitive detector at essentially constant level, despite wide variations in the brightness of the light source. The system permits detailed photographic or photoelectric recording of the phenomenon over a range of brightnesses.

  12. Modular, Microprocessor-Controlled Flash Lighting System

    NASA Technical Reports Server (NTRS)

    Kiefer, Dwayne; Gray, Elizabeth; Skupinski, Robert; Stachowicz, Arthur; Birchenough, William

    2006-01-01

    A microprocessor-controlled lighting system generates brief, precisely timed, high-intensity flashes of light for scientific imaging at frame rates up to about 1 kHz. The system includes an array of light-emitting diodes (LEDs) that are driven in synchronism with an externally generated timing signal (for example, a timing signal generated by a video camera). The light output can be varied in peak intensity, pulse duration, pulse delay, and pulse rate, all depending on the timing signal and associated externally generated control signals. The array of LEDs comprises as many as 16 LED panels that can be attached together. Each LED panel is a module consisting of a rectangular subarray of 10 by 20 LEDs of advanced design on a printed-circuit board in a mounting frame with a power/control connector. The LED panels are controlled by an LED control module that contains an AC-to-DC power supply, a control board, and 8 LED-panel driver boards. In prior LED panels, the LEDs are packaged at less than maximum areal densities in bulky metal housings that reduce effective active areas. In contrast, in the present LED panels, the LEDs are packed at maximum areal density so as to afford 100-percent active area and so that when panels are joined side by side to form the array, there are no visible seams between them and the proportion of active area is still 100 percent. Each panel produces an illuminance of .5 x 10( exp 4) lux at a distance of 5.8 in. (approx.1.6 cm). The LEDs are driven according to a pulse-width-modulation control scheme that makes it safe to drive the LEDs beyond their rated steady-state currents in order to generate additional light during short periods. The drive current and the pulse-width modulation for each LED panel can be controlled independently of those of the other 15 panels. The maximum allowable duration of each pulse of drive current is a function of the amount of overdrive, the total time to be spent in overdrive operation, and the limitations

  13. Hybrid daylight/light-emitting diode illumination system for indoor lighting.

    PubMed

    Ge, Aiming; Qiu, Peng; Cai, Jinlin; Wang, Wei; Wang, Junwei

    2014-03-20

    A hybrid illumination method using both daylight and light-emitting diodes (LEDs) for indoor lighting is presented in this study. The daylight can be introduced into the indoor space by a panel-integration system. The daylight part and LEDs are combined within a specific luminaire that can provide uniform illumination. The LEDs can be turned on and dimmed through closed-loop control when the daylight illuminance is inadequate. We simulated the illumination and calculated the indoor lighting efficiency of our hybrid daylight and LED lighting system, and compared this with that of LED and fluorescent lighting systems. Simulation results show that the efficiency of the hybrid daylight/LED illumination method is better than that of LED and traditional lighting systems, under the same lighting conditions and lighting time; the method has hybrid lighting average energy savings of T5 66.28%, and that of the LEDs is 41.62%.

  14. Hybrid daylight/light-emitting diode illumination system for indoor lighting.

    PubMed

    Ge, Aiming; Qiu, Peng; Cai, Jinlin; Wang, Wei; Wang, Junwei

    2014-03-20

    A hybrid illumination method using both daylight and light-emitting diodes (LEDs) for indoor lighting is presented in this study. The daylight can be introduced into the indoor space by a panel-integration system. The daylight part and LEDs are combined within a specific luminaire that can provide uniform illumination. The LEDs can be turned on and dimmed through closed-loop control when the daylight illuminance is inadequate. We simulated the illumination and calculated the indoor lighting efficiency of our hybrid daylight and LED lighting system, and compared this with that of LED and fluorescent lighting systems. Simulation results show that the efficiency of the hybrid daylight/LED illumination method is better than that of LED and traditional lighting systems, under the same lighting conditions and lighting time; the method has hybrid lighting average energy savings of T5 66.28%, and that of the LEDs is 41.62%. PMID:24663465

  15. Global Positioning System Synchronized Active Light Autonomous Docking System

    NASA Technical Reports Server (NTRS)

    Howard, Richard T. (Inventor); Book, Michael L. (Inventor); Bryan, Thomas C. (Inventor); Bell, Joseph L. (Inventor)

    1996-01-01

    A Global Positioning System Synchronized Active Light Autonomous Docking System (GPSSALADS) for automatically docking a chase vehicle with a target vehicle comprising at least one active light emitting target which is operatively attached to the target vehicle. The target includes a three-dimensional array of concomitantly flashing lights which flash at a controlled common frequency. The GPSSALADS further comprises a visual tracking sensor operatively attached to the chase vehicle for detecting and tracking the target vehicle. Its performance is synchronized with the flash frequency of the lights by a synchronization means which is comprised of first and second internal clocks operatively connected to the active light target and visual tracking sensor, respectively, for providing timing control signals thereto, respectively. The synchronization means further includes first and second Global Positioning System receivers operatively connected to the first and second internal clocks, respectively, for repeatedly providing simultaneous synchronization pulses to the internal clocks, respectively. In addition, the GPSSALADS includes a docking process controller means which is operatively attached to the chase vehicle and is responsive to the visual tracking sensor for producing commands for the guidance and propulsion system of the chase vehicle.

  16. Global Positioning System Synchronized Active Light Autonomous Docking System

    NASA Technical Reports Server (NTRS)

    Howard, Richard (Inventor)

    1994-01-01

    A Global Positioning System Synchronized Active Light Autonomous Docking System (GPSSALADS) for automatically docking a chase vehicle with a target vehicle comprises at least one active light emitting target which is operatively attached to the target vehicle. The target includes a three-dimensional array of concomitantly flashing lights which flash at a controlled common frequency. The GPSSALADS further comprises a visual tracking sensor operatively attached to the chase vehicle for detecting and tracking the target vehicle. Its performance is synchronized with the flash frequency of the lights by a synchronization means which is comprised of first and second internal clocks operatively connected to the active light target and visual tracking sensor, respectively, for providing timing control signals thereto, respectively. The synchronization means further includes first and second Global Positioning System receivers operatively connected to the first and second internal clocks, respectively, for repeatedly providing simultaneous synchronization pulses to the internal clocks, respectively. In addition, the GPSSALADS includes a docking process controller means which is operatively attached to the chase vehicle and is responsive to the visual tracking sensor for producing commands for the guidance and propulsion system of the chase vehicle.

  17. Global Positioning System Synchronized Active Light Autonomous Docking System

    NASA Astrophysics Data System (ADS)

    Howard, Richard

    1994-08-01

    A Global Positioning System Synchronized Active Light Autonomous Docking System (GPSSALADS) for automatically docking a chase vehicle with a target vehicle comprises at least one active light emitting target which is operatively attached to the target vehicle. The target includes a three-dimensional array of concomitantly flashing lights which flash at a controlled common frequency. The GPSSALADS further comprises a visual tracking sensor operatively attached to the chase vehicle for detecting and tracking the target vehicle. Its performance is synchronized with the flash frequency of the lights by a synchronization means which is comprised of first and second internal clocks operatively connected to the active light target and visual tracking sensor, respectively, for providing timing control signals thereto, respectively. The synchronization means further includes first and second Global Positioning System receivers operatively connected to the first and second internal clocks, respectively, for repeatedly providing simultaneous synchronization pulses to the internal clocks, respectively. In addition, the GPSSALADS includes a docking process controller means which is operatively attached to the chase vehicle and is responsive to the visual tracking sensor for producing commands for the guidance and propulsion system of the chase vehicle.

  18. Spectrally-balanced chromatic approach-lighting system

    NASA Technical Reports Server (NTRS)

    Chase, W. D.

    1977-01-01

    Approach lighting system employing combinations of red and blue lights reduces problem of color-based optical illusions. System exploits inherent chromatic aberration of eye to create three-dimensional effect, giving pilot visual clues of position.

  19. The global light system laser station prototype

    NASA Astrophysics Data System (ADS)

    Hunt, Patrick R.

    We describe the design and fabrication of a prototype Global Light System (GLS) laser station for the JEM-EUSO project. The GLS will consist of a network of ground-based Ultraviolet (UV) light-emitting diodes (LEDs) and steered lasers to monitor and calibrate the cosmic ray detector planned for install on the International Space Station (ISS). The GLS units will generate optical signatures in the atmosphere that are comparable to tracks from cosmic ray extensive air showers (EASs). Unlike an EAS, the number, time, energy, location and direction (for lasers) of GLS events can be specified as JEM-EUSO passes 400 km overhead. Laser tracks from the GLS prototype will be recorded by prototype detectors in ground-to-ground tests. Distant tracks with low angular speed are of particular interest because these are the types of EAS tracks that will be measured by JEM-EUSO. To do these ground-to-ground tests, the prototype detectors will need to measure the laser through the atmosphere at low elevation viewing angles. The beam energy can be adjusted from 1 to 90 mJ to compensate for this additional atmospheric attenuation. The frequency-tripled Nd:YAG laser produces 355 nm (7 ns pulse) light. This wavelength is near the center of the UV EAS fluorescence spectrum. The system is housed in a utility trailer that can be transported by a small truck for domestic campaigns or shipped in an industry standard 20 foot container for global deployment. In operation mode, the laser platform inside the trailer is isolated mechanically to maintain beam pointing accuracy. A retractable two stage steering head can point in any direction above the horizon. A slip ring eliminates cable wrap problems. The GLS prototype will be used to test the EUSO-TA detector and will also be used in preflight tests of the EUSO-balloon payload planned for a super pressure balloon mission.

  20. Illuminating system and method for specialized and decorative lighting using liquid light guides

    DOEpatents

    Zorn, C.J.; Kross, B.J.; Majewski, S.; Wojcik, R.F.

    1998-08-25

    The present invention comprises an illumination system for specialized decorative lighting including a light source, a flexible plastic tube sheath for distributing the light to a remote location, a transparent liquid core filling the tube that has an index of refraction greater than that of the plastic tube and an arrangement where light coupled from the light source is caused to leak from the liquid light guide at desired locations for the purposes of specialized lighting, such as underwater illumination in swimming pools. 5 figs.

  1. The Role 3 Multinational Medical Unit at Kandahar Airfield 2005-2010.

    PubMed

    Brisebois, Ronald; Hennecke, Peter; Kao, Raymond; McAlister, Vivian; Po, Joseph; Stiegelmar, Rob; Tien, Homer

    2011-12-01

    In late 2005, Canadian Forces Health Services (CFHS) was tasked with the command of the NATO Role 3 Multinational Medical Unit (R3MMU) on Kandahar Airfield in southern Afghanistan. Preparations drew on past experience and planning. Eight complete hospital contingents were trained and deployed in rotation. Near-reality simulation training was undertaken with the combat brigade, including complete deployment of the field hospital in the exercise area. Standard operating procedures (SOP) were developed and applied by each rotation so successfully that they were adopted by the new command in late 2009. The Canadian period at R3MMU had the highest survival rate ever recorded for victims of war. Lessons learned are being applied among victims of the conflict and trauma. The experience of the R3MMU was used to successfully deploy a hospital as part of the earthquake relief effort in Haiti in 2010.The training protocols and SOP are being applied to disaster preparedness in Canadian civilian hospitals.

  2. Optical design and lighting application of an LED-based sports lighting system

    NASA Astrophysics Data System (ADS)

    Boxler, Larry

    2011-10-01

    This paper describes both the optical development of an LED-based sports lighting system and the results of the application of the system to an actual sport field. A traditional sport lighting fixture is generally composed of a single 1500 watt High Intensity Discharge (HID) light source with reflectors used to control the light distribution. The efficacy of the HID light source is equivalent or nearly equivalent to most LED light sources, putting LEDs at a large cost disadvantage in a high light output application such as sports lighting due to the number of LEDs and supporting components required to run an LED system. To assess the feasibility and applicability of LEDs in a sports lighting application, an LED-based sport light has been developed and installed on a small soccer field specified to have an average maintained illuminance level of 30 footcandles. An existing HID sport lighting system was also installed on the same size soccer field adjacent to the LED field with the same average footcandle level for comparison. Results indicate that LEDs can provide equivalent average illumination; however the LED source and system component cost is substantially higher. Despite the high cost, it was found that improved optical control afforded by the optical design used in the system provides a significant improvement in offsite wasted spill light, glare control, and on field uniformity. This could provide an advantage for LED systems.

  3. 46 CFR 169.829 - Emergency lighting and power systems.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Emergency lighting and power systems. 169.829 Section... SCHOOL VESSELS Operations Tests, Drills, and Inspections § 169.829 Emergency lighting and power systems. (a) Where fitted, the master shall have the emergency lighting and power systems operated...

  4. 46 CFR 169.829 - Emergency lighting and power systems.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Emergency lighting and power systems. 169.829 Section... SCHOOL VESSELS Operations Tests, Drills, and Inspections § 169.829 Emergency lighting and power systems. (a) Where fitted, the master shall have the emergency lighting and power systems operated...

  5. 46 CFR 169.829 - Emergency lighting and power systems.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Emergency lighting and power systems. 169.829 Section... SCHOOL VESSELS Operations Tests, Drills, and Inspections § 169.829 Emergency lighting and power systems. (a) Where fitted, the master shall have the emergency lighting and power systems operated...

  6. 46 CFR 169.829 - Emergency lighting and power systems.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Emergency lighting and power systems. 169.829 Section... SCHOOL VESSELS Operations Tests, Drills, and Inspections § 169.829 Emergency lighting and power systems. (a) Where fitted, the master shall have the emergency lighting and power systems operated...

  7. 46 CFR 169.829 - Emergency lighting and power systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Emergency lighting and power systems. 169.829 Section... SCHOOL VESSELS Operations Tests, Drills, and Inspections § 169.829 Emergency lighting and power systems. (a) Where fitted, the master shall have the emergency lighting and power systems operated...

  8. Portable Runway Intersection Display and Monitoring System

    NASA Technical Reports Server (NTRS)

    Dabney, Richard W. (Inventor); Elrod, Susan Vinz (Inventor)

    2011-01-01

    Systems, methods and apparatus are provided through which an apparatus located on an airfield provides information to pilots in aircraft on the ground and simultaneously gathers information on the motion and position of the aircraft for controllers.

  9. A novel amblyopia treatment system based on LED light source

    NASA Astrophysics Data System (ADS)

    Zhang, Xiaoqing; Chen, Qingshan; Wang, Xiaoling

    2011-05-01

    A novel LED (light emitting diode) light source of five different colors (white, red, green, blue and yellow) is adopted instead of conventional incandescent lamps for an amblyopia treatment system and seven training methods for rectifying amblyopia are incorporated so as for achieving an integrated therapy. The LED light source is designed to provide uniform illumination, adjustable light intensity and alterable colors. Experimental tests indicate that the LED light source operates steadily and fulfills the technical demand of amblyopia treatment.

  10. A novel amblyopia treatment system based on LED light source

    NASA Astrophysics Data System (ADS)

    Zhang, Xiaoqing; Chen, Qingshan; Wang, Xiaoling

    2010-12-01

    A novel LED (light emitting diode) light source of five different colors (white, red, green, blue and yellow) is adopted instead of conventional incandescent lamps for an amblyopia treatment system and seven training methods for rectifying amblyopia are incorporated so as for achieving an integrated therapy. The LED light source is designed to provide uniform illumination, adjustable light intensity and alterable colors. Experimental tests indicate that the LED light source operates steadily and fulfills the technical demand of amblyopia treatment.

  11. Freeform microstructure linear light emitter design for a natural light illumination system.

    PubMed

    Chen, Bo-Jian; Gao, Bo-Yuan; Ullah, Irfan; Chen, Kuan-Yu; Chou, Chun-Han; Lin, Chia-Min; Chang, Cheng-Ming; Jhan, Kai-Cyuan; Whang, Allen Jong-Woei

    2015-10-01

    The major factors of an illuminative environment are a high rendering index and uniformity. The natural light illumination system (NLIS) is used to guide sunlight for indoor illumination. The NLIS consists of three subsystems: collecting, transmitting, and emitting. Nowadays, a variety of light emitters are available for different illuminative environments. This paper proposes a linear microstructure to diffuse parallel light for indoor illumination. To increase uniformity and promote the illuminative area, the light emitter includes two microstructures for the distribution of light. Finally, the proposed light emitter gives illuminance uniformity and efficiency of 0.55% and 74.18%, respectively. PMID:26479647

  12. Freeform microstructure linear light emitter design for a natural light illumination system.

    PubMed

    Chen, Bo-Jian; Gao, Bo-Yuan; Ullah, Irfan; Chen, Kuan-Yu; Chou, Chun-Han; Lin, Chia-Min; Chang, Cheng-Ming; Jhan, Kai-Cyuan; Whang, Allen Jong-Woei

    2015-10-01

    The major factors of an illuminative environment are a high rendering index and uniformity. The natural light illumination system (NLIS) is used to guide sunlight for indoor illumination. The NLIS consists of three subsystems: collecting, transmitting, and emitting. Nowadays, a variety of light emitters are available for different illuminative environments. This paper proposes a linear microstructure to diffuse parallel light for indoor illumination. To increase uniformity and promote the illuminative area, the light emitter includes two microstructures for the distribution of light. Finally, the proposed light emitter gives illuminance uniformity and efficiency of 0.55% and 74.18%, respectively.

  13. 14 CFR 23.1401 - Anticollision light system.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... arrangement of the system, that is, the number of light sources, beam width, speed of rotation, and other... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Anticollision light system. 23.1401 Section... AIRWORTHINESS STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Equipment Lights §...

  14. Field Commissioning of a Daylight-Dimming Lighting System.

    ERIC Educational Resources Information Center

    Floyd, David B.; Parker, Danny S.

    A Florida elementary school cafeteria, retrofitted with a fluorescent lighting system that dims in response to available daylight, was evaluated through real time measurement of lighting and air conditioning power, work plane illumination, and interior/exterior site conditions. The new system produced a 27 percent reduction in lighting power due…

  15. 14 CFR 27.1385 - Position light system installation.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Position light system installation. 27.1385 Section 27.1385 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Equipment Lights § 27.1385 Position light system installation. (a) General. Each part...

  16. 14 CFR 29.1385 - Position light system installation.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Position light system installation. 29.1385 Section 29.1385 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Equipment Lights § 29.1385 Position light system installation. (a) General. Each...

  17. Software for portable laser light show system

    NASA Astrophysics Data System (ADS)

    Buruchin, Dmitrey J.; Leonov, Alexander F.

    1995-04-01

    Portable laser light show system LS-3500-10M is connected to the parallel port of IBM PC/AT compatible computer. Computer performs output of digital control data describing images. Specially designed control device is used to convert digital data coming from parallel port to the analog signal driving scanner. Capabilities of even cost nothing 286 computer are quite enough for laser graphics control. Technology of scanning used in laser graphics system LS-3500-10M essentially differs from widely spread systems based on galvanometers with mobile core or with mobile magnet. Such devices are based on the same principle of work as electrically driven servo-mechanism. As scanner we use elastic system with hydraulic dampen oscillations and opened loop. For most of applications of laser graphics such system provides satisfactory precision and speed of scanning. LS-3500-10M software gives user ability to create on PC and play his own laser graphics demonstrations. It is possible to render recognizable text and pictures using different styles, 3D and abstract animation. All types of demonstrations can be mixed in slide-show. Time synchronization is supported. Software has the following features: (1) Different types of text output. Built-in text editor for typing and editing of textural information. Different fonts can be used to display text. User can create his own fonts using specially developed font editor. (2) Editor of 3D animation with library of predefined shapes. (3) Abstract animation provided by software routines. (4) Support of different graphics files formats (PCX or DXF). Original algorithm of raster image tracing was implemented. (5) Built-in slide-show editor.

  18. Lighting System for Visual Perception Enhancement in Volume Rendering.

    PubMed

    Wang, Lei; Kaufman, Arie E

    2013-01-01

    We introduce a lighting system that enhances the visual cues in a rendered image for the perception of 3D volumetric objects. We divide the lighting effects into global and local effects, and deploy three types of directional lights: the key light and accessory lights (fill and detail lights). The key light provides both lighting effects and carries the visual cues for the perception of local and global shapes and depth. The cues for local shapes are conveyed by gradient; those for global shapes are carried by shadows; and those for depth are provided by shadows and translucent objects. Fill lights produce global effects to increase the perceptibility. Detail lights generate local effects to improve the cues for local shapes. Our method quantifies the perception and uses an exhaustive search to set the lights. It configures accessory lights with the consideration of preserving the global impression conveyed by the key light. It ensures the feeling of smooth light movements in animations. With simplification, it achieves interactive frame rates and produces results that are visually indistinguishable from results using the nonsimplified algorithm. The major contributions of this paper are our lighting system, perception measurement and lighting design algorithm with our indistinguishable simplification.

  19. Global Light System for JEM-EUSO

    NASA Technical Reports Server (NTRS)

    Christl, Mark

    2013-01-01

    The Global Light System (GLS) is a network of ground-based Xenon flash lamps and steered UV lasers to validate the key functions of the JEM-EUSO instrument. These functions include triggering efficiency, the accuracy of intrinsic luminosity measurements, and the reconstructed pointing direction accuracy. GLS units will generate benchmark optical signatures in the atmosphere with similar characteristics to the optical signals of cosmic ray EASs. The lasers will generate tracks and the flashers will generate point flashes. But unlike air showers, the number, energy, precise time, direction (lasers) can be specified. JEM-EUSO will reconstruct the pointing directions of the lasers and the energy of the lasers and flash lamps to monitor the detector's triggers, and accuracy of energy and direction reconstruction. 12 GLS units will be deployed at selected sites around the globe. The JEM-EUSO footprint will pass over a GLS unit on average once per (near) moonless night under clear conditions for appropriately selected sites. The 12 units will be supplemented by campaign style measurements with an airborne unit that will be flown over the open ocean at selected altitudes under JEM-EUSO. A GLS prototype in an airplane will support a high-altitude balloon flight in 2014 of a proto-type JEM-EUSO telescope. We will describe the concept and system design and report on the status of prototyping and the selection process for candidates sites.

  20. Radioluminescent lighting program description

    SciTech Connect

    1987-11-01

    For more than 30 years the Department of Energy (DOE) and its predecessor agencies have conducted research and development aimed at beneficial uses of products derived from its nuclear activities. An important and promising element of radiation technology is the Program for Radioluminescent (RL) development. For years simple RL devices, such as aircraft exit signs, have served necessary functions in society. Electrons exciting phosphors and producing light is a fundamental concept to which the layman can immediately relate, while gaining a balanced perspective concerning risk and safety. DOE`s RL lighting development program has advanced the technology with infrared RL markers for helipads which are not detectable without the aid of special viewers. These devices were used to aid in the evacuation of wounded from Grenada. Visible RL airfield lighting has been used to promote aviation safety in remote Eskimo communities in Alaska, and non-electric taxiway signs and markers in the corrosive saline soils of Florida airports. The current plan is to consolidate past accomplishments and develop RL devices and systems using advanced technology for new applications. The potential for improved performance that solid-matrix RL techniques offer has stimulated interest in a variety of innovative applications for which electric lighting has long been the only practical alternative. The program described in this document is intended to provide for an optimum development and application of RL technology while supporting the transfer of this technology to the private sector and providing an institutional perspective from which the longer range applications and ramifications of this technology can be anticipated.

  1. Backscatter absorption gas imaging systems and light sources therefore

    DOEpatents

    Kulp, Thomas Jan; Kliner, Dahv A. V.; Sommers, Ricky; Goers, Uta-Barbara; Armstrong, Karla M.

    2006-12-19

    The location of gases that are not visible to the unaided human eye can be determined using tuned light sources that spectroscopically probe the gases and cameras that can provide images corresponding to the absorption of the gases. The present invention is a light source for a backscatter absorption gas imaging (BAGI) system, and a light source incorporating the light source, that can be used to remotely detect and produce images of "invisible" gases. The inventive light source has a light producing element, an optical amplifier, and an optical parametric oscillator to generate wavelength tunable light in the IR. By using a multi-mode light source and an amplifier that operates using 915 nm pump sources, the power consumption of the light source is reduced to a level that can be operated by batteries for long periods of time. In addition, the light source is tunable over the absorption bands of many hydrocarbons, making it useful for detecting hazardous gases.

  2. Panel-integration of natural light and the related system of light guiding and illumination.

    PubMed

    Ge, Aiming; Cai, Jinlin; Li, Lin; Wang, Wei; Qiu, Peng

    2012-09-01

    This Letter proposes an idea of a natural light illumination system by using a light collecting panel. The light collecting panel is coupled with a light guide followed by a specifically designed lens to achieve uniform illumination on a target screen. To assess the system specification, we build a primary model in three-dimensional modeling software and make ray tracing simulation based on a Monte Carlo algorithm. The simulation results show a relatively high efficiency of 41.41% for the entire system and achieve a high uniformity of more than 0.8 within the circular illumination area.

  3. The photocytotoxicity of different lights on mammalian cells in interior lighting system.

    PubMed

    Song, Jiayin; Gao, Tingting; Ye, Maole; Bi, Hongtao; Liu, Gang

    2012-12-01

    In the present paper, two light sources commonly used in interior lighting system: incandescent light and light emitting diode (LED) were chosen to evaluate their influences on three kinds of mammalian cells, together with UVA and UVB, and the mechanism of the photocytotoxicity was investigated in terms of intracellular ROS production, lipid peroxidation, SOD activity and GSH level assays. The results showed that LED and incandescent light both had some photocytotoxicities. In the interior lighting condition (100lx-250lx), the cytotoxicities of LED and incandescent lamp on RF/6A cells (rhesus retinal pigment epithelium cell line) were stronger than that on two fibroblast cell lines, while the cytotoxicity of UVA and UVB on HS68 cells (fibroblast cell line) was highest in the tests. The mechanism analysis revealed that the photocytotoxicities of LED and incandescent lamp were both caused by cell lipid peroxidation. LED and incandescent light could promote the production of ROS, raise lipid peroxidation level and lower the activity of the antioxidant key enzymes in mammalian cells, and finally cause a number of cells death. However, the negative function of LED was significantly smaller than incandescent light and ultraviolet in daily interior lighting condition. And the significantly lower photocytotoxicity of LED might be due to the less existence of ultraviolet. Therefore, LED is an efficient and relative safe light source in interior lighting system, which should be widely used instead of traditional light source.

  4. Solid-State Spectral Light Source System

    NASA Technical Reports Server (NTRS)

    Maffione, Robert; Dana, David

    2011-01-01

    A solid-state light source combines an array of light-emitting diodes (LEDs) with advanced electronic control and stabilization over both the spectrum and overall level of the light output. The use of LEDs provides efficient operation over a wide range of wavelengths and power levels, while electronic control permits extremely stable output and dynamic control over the output. In this innovation, LEDs are used instead of incandescent bulbs. Optical feedback and digital control are used to monitor and regulate the output of each LED. Because individual LEDs generate light within narrower ranges of wavelengths than incandescent bulbs, multiple LEDs are combined to provide a broad, continuous spectrum, or to produce light within discrete wavebands that are suitable for specific radiometric sensors.

  5. The Use of Light Rail or Light Rapid Transit Systems by Individuals with Severe Visual Impairments.

    ERIC Educational Resources Information Center

    Svendsen, K.

    1994-01-01

    This study investigated the relationship between use of light rapid or light rail transit (LRT) systems by persons with severe visual impairments and independence in orientation and mobility. It found that orientation and mobility training on LRT systems would resolve many of the difficulties that users encountered. Modifications to improve…

  6. 14 CFR 23.1385 - Position light system installation.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... must consist of a red and a green light spaced laterally as far apart as practicable and installed on the airplane such that, with the airplane in the normal flying position, the red light is on the left... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Position light system installation....

  7. 14 CFR 23.1385 - Position light system installation.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... must consist of a red and a green light spaced laterally as far apart as practicable and installed on the airplane such that, with the airplane in the normal flying position, the red light is on the left... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Position light system installation....

  8. Test report light duty utility arm power distribution system (PDS)

    SciTech Connect

    Clark, D.A.

    1996-03-04

    The Light Duty Utility Arm (LDUA) Power Distribution System has completed vendor and post-delivery acceptance testing. The Power Distribution System has been found to be acceptable and is now ready for integration with the overall LDUA system.

  9. Multimode tapered optical light pipe for illumination systems

    NASA Astrophysics Data System (ADS)

    Romańczuk, Patryk; Pietrzycki, Marcin; Źmojda, Jacek; Kochanowicz, Marcin; Dorosz, Dominik

    2015-09-01

    In the article the multimode tapered optical light pipe for illumination systems was investigated. Based on tree light emitting diodes at the wavelength of 460 nm (blue), 528 nm (green) and 631 nm (red) possibility of white light emission on the output surface of the tapered light pipe was submitted. Influence of optical power of LEDs on the colour coordinates (CIE-1931) has been investigated.

  10. Lighting system with thermal management system having point contact synthetic jets

    DOEpatents

    Arik, Mehmet; Weaver, Stanton Earl; Kuenzler, Glenn Howard; Wolfe, Jr, Charles Franklin; Sharma, Rajdeep

    2016-08-30

    Lighting systems having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system includes a plurality of synthetic jets. The synthetic jets are arranged within the lighting system such that they are secured at contact points.

  11. Lighting system with thermal management system having point contact synthetic jets

    DOEpatents

    Arik, Mehmet; Weaver, Stanton Earl; Kuenzler, Glenn Howard; Wolfe, Jr., Charles Franklin; Sharma, Rajdeep

    2016-08-23

    Lighting systems having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system includes a plurality of synthetic jets. The synthetic jets are arranged within the lighting system such that they are secured at contact points.

  12. Lighting system with thermal management system having point contact synthetic jets

    DOEpatents

    Arik, Mehmet; Weaver, Stanton Earl; Kuenzler, Glenn Howard; Wolfe, Jr., Charles Franklin; Sharma, Rajdeep

    2013-12-10

    Lighting system having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system includes a plurality of synthetic jets. The synthetic jets are arranged within the lighting system such that they are secured at contact points.

  13. The Role 3 Multinational Medical Unit at Kandahar Airfield 2005-2010.

    PubMed

    Brisebois, Ronald; Hennecke, Peter; Kao, Raymond; McAlister, Vivian; Po, Joseph; Stiegelmar, Rob; Tien, Homer

    2011-12-01

    In late 2005, Canadian Forces Health Services (CFHS) was tasked with the command of the NATO Role 3 Multinational Medical Unit (R3MMU) on Kandahar Airfield in southern Afghanistan. Preparations drew on past experience and planning. Eight complete hospital contingents were trained and deployed in rotation. Near-reality simulation training was undertaken with the combat brigade, including complete deployment of the field hospital in the exercise area. Standard operating procedures (SOP) were developed and applied by each rotation so successfully that they were adopted by the new command in late 2009. The Canadian period at R3MMU had the highest survival rate ever recorded for victims of war. Lessons learned are being applied among victims of the conflict and trauma. The experience of the R3MMU was used to successfully deploy a hospital as part of the earthquake relief effort in Haiti in 2010.The training protocols and SOP are being applied to disaster preparedness in Canadian civilian hospitals. PMID:22099325

  14. The Role 3 Multinational Medical Unit at Kandahar Airfield 2005–2010

    PubMed Central

    Brisebois, Ronald; Hennecke, Peter; Kao, Raymond; McAlister, Vivian; Po, Joseph; Stiegelmar, Rob; Tien, Homer

    2011-01-01

    In late 2005, Canadian Forces Health Services (CFHS) was tasked with the command of the NATO Role 3 Multinational Medical Unit (R3MMU) on Kandahar Airfield in southern Afghanistan. Preparations drew on past experience and planning. Eight complete hospital contingents were trained and deployed in rotation. Near-reality simulation training was undertaken with the combat brigade, including complete deployment of the field hospital in the exercise area. Standard operating procedures (SOP) were developed and applied by each rotation so successfully that they were adopted by the new command in late 2009. The Canadian period at R3MMU had the highest survival rate ever recorded for victims of war. Lessons learned are being applied among victims of the conflict and trauma. The experience of the R3MMU was used to successfully deploy a hospital as part of the earthquake relief effort in Haiti in 2010. The training protocols and SOP are being applied to disaster preparedness in Canadian civilian hospitals. PMID:22099325

  15. Development of lighting system for hologram using high power LEDs

    NASA Astrophysics Data System (ADS)

    Baba, Junko; Yaeda, Asami; Asakawa, Hisashi; Shibuya, Takehisa; Wakaki, Moriaki

    2007-02-01

    Light emitting diode (LED) became popular rapidly by the appearance of blue LED. Three color (R, G, B) emitting LEDs are utilized for the image display system by the development of multi color emitting LED. White LEDs became to commercial base by combining blue or UV light sources for excitation and materials for fluorescence. White LEDs are prevailing for general lighting applications. A single tip with the power of 5W became line up for commercial market owing to the research for high intensity LEDs. As a result, LEDs are replacing the market of conventional incandescent lighting and even head lights of the automobile. In this study, we aim to fabricate the white and R, G, B lighting system using high brightness LEDs for the lighting of holograms instead of a conventional halogen lamp.

  16. Wearable light management system for light stimulated healing of large area chronic wounds (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Kallweit, David; Mayer, Jan; Fricke, Sören; Schnieper, Marc; Ferrini, Rolando

    2016-03-01

    Chronic wounds represent a significant burden to patients, health care professionals, and health care systems, affecting over 40 million patients and creating costs of approximately 40 billion € annually. We will present a medical device for photo-stimulated wound care based on a wearable large area flexible and disposable light management system consisting of a waveguide with incorporated micro- and nanometer scale optical structures for efficient light in-coupling, waveguiding and homogeneous illumination of large area wounds. The working principle of this innovative device is based on the therapeutic effects of visible light to facilitate the self-healing process of chronic wounds. On the one hand, light exposure in the red (656nm) induces growth of keratinocytes and fibroblasts in deeper layers of the skin. On the other hand, blue light (453nm) is known to have antibacterial effects predominately at the surface layers of the skin. In order to be compliant with medical requirements the system will consist of two elements: a disposable wound dressing with embedded flexible optical waveguides for the light management and illumination of the wound area, and a non-disposable compact module containing the light sources, a controller, a rechargeable battery, and a data transmission unit. In particular, we will report on the developed light management system. Finally, as a proof-of-concept, a demonstrator will be presented and its performances will be reported to demonstrate the potential of this innovative device.

  17. Beacon system based on light-emitting diode sources for runways lighting

    NASA Astrophysics Data System (ADS)

    Montes, Mario González; Vázquez, Daniel; Fernandez-Balbuena, Antonio A.; Bernabeu, Eusebio

    2014-06-01

    New aeronautical ground lighting techniques are becoming increasingly important to ensure the safety and reduce the maintenance costs of the plane's tracks. Until recently, tracks had embedded lighting systems whose sources were based on incandescent lamps. But incandescent lamps have several disadvantages: high energy consumption and frequent breakdowns that result in high maintenance costs (lamp average life-time is ˜1500 operating hours) and the lamp's technology has a lack of new lighting functions, such as signal handling and modification. To solve these problems, the industry has developed systems based on light-emitting diode (LED) technology with improved features: (1) LED lighting consumes one tenth the power, (2) it improves preventive maintenance (an LED's lifetime range is between 25,000 and 100,000 hours), and (3) LED lighting technology can be controlled remotely according to the needs of the track configuration. LEDs have been in use for more than three decades, but only recently, around 2002, have they begun to be used as visual aids, representing the greatest potential change for airport lighting since their inception in the 1920s. Currently, embedded LED systems are not being broadly used due to the specific constraints of the rules and regulations of airports (beacon dimensions, power system technology, etc.). The fundamental requirements applied to embedded lighting systems are to be hosted on a volume where the dimensions are usually critical and also to integrate all the essential components for operation. An embedded architecture that meets the lighting regulations for airport runways is presented. The present work is divided into three main tasks: development of an optical system to optimize lighting according to International Civil Aviation Organization, manufacturing prototype, and model validation.

  18. System for diffusing light from an optical fiber or light guide

    DOEpatents

    Maitland, Duncan J [Pleasant Hill, CA; Wilson, Thomas S [San Leandro, CA; Benett, William J [Livermore, CA; Small, IV, Ward [

    2008-06-10

    A system for diffusing light from an optical fiber wherein the optical fiber is coupled to a light source, comprising forming a polymer element adapted to be connected to the optical fiber and incorporating a scattering element with the polymer element wherein the scattering element diffuses the light from the polymer element. The apparatus of the present invention comprises a polymer element operatively connected to the optical fiber and a scattering element operatively connected with the shape polymer element that diffuses the light from the polymer element.

  19. [Drug release system controlled by near infrared light].

    PubMed

    Niidome, Takuro

    2013-01-01

    Gold nanorods have absorption bands in the near-infrared region; in this spectral range, light penetrates deeply into tissues. The absorbed light energy is converted into heat by gold nanorods. This is the so-called photothermal effect. Gold nanorods are therefore expected to act not only as thermal converters for photothermal therapy, but also as controllers for drug-release systems responding to irradiation with near-infrared light. To achieve a controlled-release system that could be triggered by light irradiation, the gold nanorods were modified with double-stranded DNA (dsDNA). When the dsDNA-modified gold nanorods were irradiated with near-infrared light, single-stranded DNA (ssDNA) was released from the gold nanorods because of the photothermal effect. The release of ssDNA was also observed in tumors grown on mice after near-infrared light irradiation. We also proposed a different controlled-release system responding to near-infrared light. Gold nanorods were modified with polyethylene glycol (PEG) through Diels-Alder cycloadducts. When the gold nanorods were irradiated with near-infrared light, the PEG chains were released from the gold nanorods because of the retro Diels-Alder reaction induced by the photothermal effect. Such controlled-release systems triggered by near-infrared light irradiation will be expanded for gold nanorod drug delivery system applications.

  20. High Quantum Efficiency OLED Lighting Systems

    SciTech Connect

    Shiang, Joseph

    2011-09-30

    The overall goal of the program was to apply improvements in light outcoupling technology to a practical large area plastic luminaire, and thus enable the product vision of an extremely thin form factor high efficiency large area light source. The target substrate was plastic and the baseline device was operating at 35 LPW at the start of the program. The target LPW of the program was a >2x improvement in the LPW efficacy and the overall amount of light to be delivered was relatively high 900 lumens. Despite the extremely difficult challenges associated with scaling up a wet solution process on plastic substrates, the program was able to make substantial progress. A small molecule wet solution process was successfully implemented on plastic substrates with almost no loss in efficiency in transitioning from the laboratory scale glass to large area plastic substrates. By transitioning to a small molecule based process, the LPW entitlement increased from 35 LPW to 60 LPW. A further 10% improvement in outcoupling efficiency was demonstrated via the use of a highly reflecting cathode, which reduced absorptive loss in the OLED device. The calculated potential improvement in some cases is even larger, ~30%, and thus there is considerable room for optimism in improving the net light coupling efficacy, provided absorptive loss mechanisms are eliminated. Further improvements are possible if scattering schemes such as the silver nanowire based hard coat structure are fully developed. The wet coating processes were successfully scaled to large area plastic substrate and resulted in the construction of a 900 lumens luminaire device.

  1. Tridimensional reconstruction using structured light systems

    NASA Astrophysics Data System (ADS)

    Legarda-Saenz, Ricardo

    2006-02-01

    The automatic, non contact measurement of objects in industrial applications is one of the most important applications of the optical 3-D shape measurement methods. A well established 3-D shape measurement technique is triangulation with structured light. In this paper, it will outline on two important aspects of this technique: pattern-codification strategy and calibration procedure, in order to obtain a high accuracy reconstruction.

  2. Development of a PET/Cerenkov-light hybrid imaging system

    SciTech Connect

    Yamamoto, Seiichi Hamamura, Fuka; Kato, Katsuhiko; Ogata, Yoshimune; Watabe, Tadashi; Ikeda, Hayato; Kanai, Yasukazu; Hatazawa, Jun; Watabe, Hiroshi

    2014-09-15

    Purpose: Cerenkov-light imaging is a new molecular imaging technology that detects visible photons from high-speed electrons using a high sensitivity optical camera. However, the merit of Cerenkov-light imaging remains unclear. If a PET/Cerenkov-light hybrid imaging system were developed, the merit of Cerenkov-light imaging would be clarified by directly comparing these two imaging modalities. Methods: The authors developed and tested a PET/Cerenkov-light hybrid imaging system that consists of a dual-head PET system, a reflection mirror located above the subject, and a high sensitivity charge coupled device (CCD) camera. The authors installed these systems inside a black box for imaging the Cerenkov-light. The dual-head PET system employed a 1.2 × 1.2 × 10 mm{sup 3} GSO arranged in a 33 × 33 matrix that was optically coupled to a position sensitive photomultiplier tube to form a GSO block detector. The authors arranged two GSO block detectors 10 cm apart and positioned the subject between them. The Cerenkov-light above the subject is reflected by the mirror and changes its direction to the side of the PET system and is imaged by the high sensitivity CCD camera. Results: The dual-head PET system had a spatial resolution of ∼1.2 mm FWHM and sensitivity of ∼0.31% at the center of the FOV. The Cerenkov-light imaging system's spatial resolution was ∼275μm for a {sup 22}Na point source. Using the combined PET/Cerenkov-light hybrid imaging system, the authors successfully obtained fused images from simultaneously acquired images. The image distributions are sometimes different due to the light transmission and absorption in the body of the subject in the Cerenkov-light images. In simultaneous imaging of rat, the authors found that {sup 18}F-FDG accumulation was observed mainly in the Harderian gland on the PET image, while the distribution of Cerenkov-light was observed in the eyes. Conclusions: The authors conclude that their developed PET/Cerenkov-light hybrid

  3. Aquatic toxicity of airfield-pavement deicer materials and implications for airport runoff

    USGS Publications Warehouse

    Corsi, S.R.; Geis, S.W.; Bowman, G.; Failey, G.G.; Rutter, T.D.

    2009-01-01

    Concentrations of airfield-pavement deicer materials (PDM) in a study of airport runoff often exceeded levels of concern regarding aquatic toxicity. Toxicity tests on Vibrio fischeri, Pimephales promelas, Ceriodaphnia dubia, and Pseudokirchneriella subcapitata (commonly known as Selenastrum capricornutum) were performed with potassium acetate (K-Ac) PDM, sodium formate (Na-For) PDM, and with freezing- point depressants (K-Ac and Na-For). Results indicate that toxicity in PDM is driven by the freezing-point depressants in all tests except the Vibrio fisheri test for Na-For PDM which is influenced by an additive. Acute toxicity end points for different organisms ranged from 298 to 6560 mg/L (as acetate) for K-Ac PDM and from 1780 to 4130 mg/L (as formate) for Na- For PDM. Chronic toxicity end points ranged from 19.9 to 336 mg/L (as acetate) for K-Ac PDM and from 584 to 1670 mg/L (as formate) for Na-For PDM. Sample results from outfalls at General Mitchell International Airport in Milwaukee, Wl (GMIA) indicated that 40% of samples had concentrations greater than the aquatic-life benchmark for K-Ac PDM. K-Ac has replaced urea during the 1990s as the most widely used PDM at GMIA and in the United States. Results of ammonia samples from airport outfalls during periods when urea-based PDM was used at GMIA indicated that41% of samples had concentrations exceeding the U.S. Environmental Protection Agency (USEPA) 1 -h water-quality criterion. The USEPA 1-h water-quality criterion for chloride was exceeded in 68% of samples collected in the receiving stream, a result of road-salt runoff from urban influence near the airport. Results demonstrate that PDM must be considered to comprehensively evaluate the impact of chemical deicers on aquatic toxicity in water containing airport runoff. ?? 2009 American Chemical Society.

  4. Occupational exposures among personnel working near combined burn pit and incinerator operations at Bagram Airfield, Afghanistan.

    PubMed

    Blasch, Kyle; Kolivosky, John; Hill, Barry

    2016-04-01

    Occupational air samples were collected at Bagram Airfield Afghanistan for security forces (SF) stationed at the perimeter of the solid waste disposal facility that included a burn pit, air curtain destructors, and solid waste and medical waste incinerators. The objective of the investigation was to quantify inhalation exposures of workers near the disposal facility. Occupational air sample analytes included total particulates not otherwise specified (PNOS), respirable PNOS, acrolein and polyaromatic hydrocarbons (PAH). Exposures were measured for four SF job specialties. Thirty 12-hour shifts were monitored from November 2011 to March 2012. The geometric means for respirable particulate matter and PAH for all job specialties were below the 12-hour adjusted American Conference of Governmental Industrial Hygienists threshold limit value time weighted averages (TLV-TWA). The geometric mean of the respirable particulate matter 12-hour TWAs for the four job specialties ranged from 0.116 to 0.134 mg/m(3). One measurement collected at the tower (3.1 mg/m(3)) position exceeded the TLV-TWA. Naphthalene and pyrene were the only PAHs detected in multiple samples of the 18 PAHs analyzed. The geometric mean concentration for naphthalene was 9.39E-4 mg/m(3) and the maximum concentration was 0.0051 mg/m(3). The geometric mean of acrolein for the four job specialties ranged from 0.021 to 0.047 mg/m(3). There were four exceedances of the Occupational Safety and Health Administration 8-hour permissible exposure limit- time weighted average (PEL-TWA), respectively, ranging from 0.13 to 0.32 mg/m(3). PMID:27092584

  5. Aquatic toxicity of airfield-pavement deicer materials and implications for airport runoff.

    PubMed

    Corsi, Steven R; Geis, Steven W; Bowman, George; Failey, Greg G; Rutter, Troy D

    2009-01-01

    Concentrations of airfield-pavement deicer materials (PDM) in a study of airport runoff often exceeded levels of concern regarding aquatic toxicity. Toxicity tests on Vibrio fischeri, Pimephales promelas, Ceriodaphnia dubia, and Pseudokirchneriella subcapitata (commonly known as Selenastrum capricornutum) were performed with potassium acetate (K-Ac) PDM, sodium formate (Na-For) PDM, and with freezing-point depressants (K-Ac and Na-For). Results indicate that toxicity in PDM is driven by the freezing-point depressants in all tests except the Vibrio fisheri test for Na-For PDM which is influenced by an additive. Acute toxicity end points for different organisms ranged from 298 to 6560 mg/L (as acetate) for K-Ac PDM and from 1780 to 4130 mg/L (as formate) for Na-For PDM. Chronic toxicity end points ranged from 19.9 to 336 mg/L (as acetate) for K-Ac PDM and from 584 to 1670 mg/L (as formate) for Na-For PDM. Sample results from outfalls at General Mitchell International Airport in Milwaukee, WI (GMIA) indicated that 40% of samples had concentrations greater thanthe aquatic-life benchmarkfor K-Ac PDM. K-Ac has replaced urea during the 1990s as the most widely used PDM at GMIA and in the United States. Results of ammonia samples from airport outfalls during periods when urea-based PDM was used at GMIA indicated that 41% of samples had concentrations exceeding the U.S. Environmental Protection Agency (USEPA) 1-h water-quality criterion. The USEPA 1-h water-quality criterion for chloride was exceeded in 68% of samples collected in the receiving stream, a result of road-salt runoff from urban influence near the airport. Results demonstrate that PDM must be considered to comprehensively evaluate the impact of chemical deicers on aquatic toxicity in water containing airport runoff.

  6. 9. VIEW OF THE BEAM SYSTEM OF SARATOGA GAS LIGHT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. VIEW OF THE BEAM SYSTEM OF SARATOGA GAS LIGHT COMPANY GASHOLDER NO. 2 HOUSE, LOOKING EAST. WHITE (PAINTED) CAST IRON TIE PLATES ARE VISIBLE ON BASE OF ROOF TRUSSES. - Saratoga Gas Light Company, Gasholder No. 2, Niagara Mohawk Power Corporation Substation Facility, intersection of Excelsior & East Avenues, Saratoga Springs, NY

  7. Evaluation of a tritium runway-lighting system. Technical note

    SciTech Connect

    Katz, E.S.

    1992-04-01

    A tritium powered runway lighting system was installed and evaluated at the Federal Aviation Administration (FAA) Technical Center. The purpose of this evaluation was to determine if the tritium runway lighting system would safely support Federal Aviation Regulations (FAR) Part 135 commercial operations, during nighttime visual flight rules (VFR) conditions at remote airports. Subject pilots having flight experience levels appropriate for pilots conducting FAR Part 135 air taxi operations were afforded the opportunity of flight testing the system. Results of the evaluation indicate that the tritium runway lighting system does not meet all of the minimum criteria necessary for FAA approval and, therefore, would not guarantee an acceptable level of safety. Tritium Runway Lighting System, Remote Airports.

  8. Display System by Light Emitter Embedding Windmill Blade

    NASA Astrophysics Data System (ADS)

    Shin, Masaatsu; Kamiya, Takashi; Yukita, Kazuto; Goto, Yasuyuki; Ichiyanagi, Katsuhiro; Kusakabe, Tetsuro

    This paper proposes the new display system by windmill blade. The proposed method is a system by the visual afterimage phenomenon, using windmill blade in which the light emitter has been embedded. This system shows new effectiveness of the wind power generator system.

  9. Reduction of background clutter in structured lighting systems

    DOEpatents

    Carlson, Jeffrey J.; Giles, Michael K.; Padilla, Denise D.; Davidson, Jr., Patrick A.; Novick, David K.; Wilson, Christopher W.

    2010-06-22

    Methods for segmenting the reflected light of an illumination source having a characteristic wavelength from background illumination (i.e. clutter) in structured lighting systems can comprise pulsing the light source used to illuminate a scene, pulsing the light source synchronously with the opening of a shutter in an imaging device, estimating the contribution of background clutter by interpolation of images of the scene collected at multiple spectral bands not including the characteristic wavelength and subtracting the estimated background contribution from an image of the scene comprising the wavelength of the light source and, placing a polarizing filter between the imaging device and the scene, where the illumination source can be polarized in the same orientation as the polarizing filter. Apparatus for segmenting the light of an illumination source from background illumination can comprise an illuminator, an image receiver for receiving images of multiple spectral bands, a processor for calculations and interpolations, and a polarizing filter.

  10. Improved TPB-coated light guides for liquid argon TPC light detection systems

    NASA Astrophysics Data System (ADS)

    Moss, Z.; Bugel, L.; Collin, G.; Conrad, J. M.; Jones, B. J. P.; Moon, J.; Toups, M.; Wongjirad, T.

    2015-08-01

    Scintillation light produced in liquid argon (LAr) must be shifted from 128 nm to visible wavelengths in light detection systems used for liquid argon time-projection chambers (LArTPCs). To date, LArTPC light collection systems have employed tetraphenyl butadiene (TPB) coatings on photomultiplier tubes (PMTs) or plates placed in front of the PMTs. Recently, a new approach using TPB-coated light guides was proposed. In this paper, we report on light guides with improved attenuation lengths above 100 cm when measured in air. This is an important step in the development of meter-scale light guides for future LArTPCs. Improvements come from using a new acrylic-based coating, diamond-polished cast UV transmitting acrylic bars, and a hand-dipping technique to coat the bars. We discuss a model for connecting bar response in air to response in liquid argon and compare this to data taken in liquid argon. The good agreement between the prediction of the model and the measured response in liquid argon demonstrates that characterization in air is sufficient for quality control of bar production. This model can be used in simulations of light guides for future experiments.

  11. 63. DETAIL VIEW OF LIGHT METAL TRUSSING SYSTEM ON PARTIALLY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    63. DETAIL VIEW OF LIGHT METAL TRUSSING SYSTEM ON PARTIALLY DEMOLISHED GABLE END OF UNIDENTIFIED BUILDING. - Baltimore & Ohio Railroad, Mount Clare Shops, South side of Pratt Street between Carey & Poppleton Streets, Baltimore, Independent City, MD

  12. Status report on the Advanced Light Source control system

    SciTech Connect

    Magyary, S.; Chin, M.; Fahmie, M.; Lancaster, H.; Molinari, P.; Robb, A.; Timossi, C.; Young, J.

    1991-11-11

    This paper is a status report on the ADVANCED LIGHT SOURCE (ALS) control system. The current status, performance data, and future plans will be discussed. Manpower, scheduling, and costs issues are addressed.

  13. Lighting system combining daylight concentrators and an artificial source

    DOEpatents

    Bornstein, Jonathan G.; Friedman, Peter S.

    1985-01-01

    A combined lighting system for a building interior includes a stack of luminescent solar concentrators (LSC), an optical conduit made of preferably optical fibers for transmitting daylight from the LSC stack, a collimating lens set at an angle, a fixture for receiving the daylight at one end and for distributing the daylight as illumination inside the building, an artificial light source at the other end of the fixture for directing artifical light into the fixture for distribution as illumination inside the building, an automatic dimmer/brightener for the artificial light source, and a daylight sensor positioned near to the LSC stack for controlling the automatic dimmer/brightener in response to the daylight sensed. The system also has a reflector positioned behind the artificial light source and a fan for exhausting heated air out of the fixture during summer and for forcing heated air into the fixture for passage into the building interior during winter.

  14. Boundary conditions on faster-than-light transportation systems

    NASA Technical Reports Server (NTRS)

    Bennett, Gary L.; Knowles, H. B.

    1993-01-01

    In order to be consistent with current physical theories, any proposal of a faster-than light (FTL) transportation system must satisfy several critical conditions. It must predict the mass, space, and time dimensional changes predicted by relativity physics when velocity falls below the speed of light. It must also not violate causality, and remain consistent with quantum physics in the limit of microscopic systems. It is also essential that the proposal conserve energy.

  15. Metadisorder for designer light in random systems

    PubMed Central

    Yu, Sunkyu; Piao, Xianji; Hong, Jiho; Park, Namkyoo

    2016-01-01

    Disorder plays a critical role in signal transport by controlling the correlation of a system, as demonstrated in various complex networks. In wave physics, disordered potentials suppress wave transport, because of their localized eigenstates, from the interference between multiple scattering paths. Although the variation of localization with tunable disorder has been intensively studied as a bridge between ordered and disordered media, the general trend of disorder-enhanced localization has remained unchanged, and the existence of complete delocalization in highly disordered potentials has not been explored. We propose the concept of “metadisorder”: randomly coupled optical systems in which eigenstates can be engineered to achieve unusual localization. We demonstrate that one of the eigenstates in a randomly coupled system can always be arbitrarily molded, regardless of the degree of disorder, by adjusting the self-energy of each element. Ordered waves with the desired form are then achieved in randomly coupled systems, including plane waves and globally collective resonances. We also devise counterintuitive functionalities in disordered systems, such as “small-world–like” transport from non–Anderson-type localization, phase-conserving disorder, and phase-controlled beam steering. PMID:27757414

  16. 46 CFR 112.01-10 - Automatic emergency lighting and power system.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Automatic emergency lighting and power system. 112.01-10... EMERGENCY LIGHTING AND POWER SYSTEMS Definitions of Emergency Lighting and Power Systems § 112.01-10 Automatic emergency lighting and power system. An automatic emergency lighting and power system is one...

  17. 46 CFR 112.01-10 - Automatic emergency lighting and power system.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Automatic emergency lighting and power system. 112.01-10... EMERGENCY LIGHTING AND POWER SYSTEMS Definitions of Emergency Lighting and Power Systems § 112.01-10 Automatic emergency lighting and power system. An automatic emergency lighting and power system is one...

  18. 46 CFR 112.01-10 - Automatic emergency lighting and power system.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Automatic emergency lighting and power system. 112.01-10... EMERGENCY LIGHTING AND POWER SYSTEMS Definitions of Emergency Lighting and Power Systems § 112.01-10 Automatic emergency lighting and power system. An automatic emergency lighting and power system is one...

  19. 46 CFR 112.01-5 - Manual emergency lighting and power system.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Manual emergency lighting and power system. 112.01-5... EMERGENCY LIGHTING AND POWER SYSTEMS Definitions of Emergency Lighting and Power Systems § 112.01-5 Manual emergency lighting and power system. A manual emergency lighting and power system is one in which a...

  20. 46 CFR 112.01-10 - Automatic emergency lighting and power system.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Automatic emergency lighting and power system. 112.01-10... EMERGENCY LIGHTING AND POWER SYSTEMS Definitions of Emergency Lighting and Power Systems § 112.01-10 Automatic emergency lighting and power system. An automatic emergency lighting and power system is one...

  1. 46 CFR 112.01-10 - Automatic emergency lighting and power system.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Automatic emergency lighting and power system. 112.01-10... EMERGENCY LIGHTING AND POWER SYSTEMS Definitions of Emergency Lighting and Power Systems § 112.01-10 Automatic emergency lighting and power system. An automatic emergency lighting and power system is one...

  2. 46 CFR 112.01-5 - Manual emergency lighting and power system.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Manual emergency lighting and power system. 112.01-5... EMERGENCY LIGHTING AND POWER SYSTEMS Definitions of Emergency Lighting and Power Systems § 112.01-5 Manual emergency lighting and power system. A manual emergency lighting and power system is one in which a...

  3. 46 CFR 112.01-5 - Manual emergency lighting and power system.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Manual emergency lighting and power system. 112.01-5... EMERGENCY LIGHTING AND POWER SYSTEMS Definitions of Emergency Lighting and Power Systems § 112.01-5 Manual emergency lighting and power system. A manual emergency lighting and power system is one in which a...

  4. 46 CFR 112.01-5 - Manual emergency lighting and power system.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Manual emergency lighting and power system. 112.01-5... EMERGENCY LIGHTING AND POWER SYSTEMS Definitions of Emergency Lighting and Power Systems § 112.01-5 Manual emergency lighting and power system. A manual emergency lighting and power system is one in which a...

  5. 46 CFR 112.01-5 - Manual emergency lighting and power system.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Manual emergency lighting and power system. 112.01-5... EMERGENCY LIGHTING AND POWER SYSTEMS Definitions of Emergency Lighting and Power Systems § 112.01-5 Manual emergency lighting and power system. A manual emergency lighting and power system is one in which a...

  6. Simulation of selected ground-water pumping scenarios at Fort Stewart and Hunter Army Airfield, Georgia

    USGS Publications Warehouse

    Cherry, Gregory S.

    2006-01-01

    A regional MODFLOW ground-water flow model of parts of coastal Georgia, Florida, and South Carolina was used to evaluate the effects of current and hypothetical groundwater withdrawal, and the relative effects of pumping in specific areas on ground-water flow in the Upper Floridan aquifer near Fort Stewart and Hunter Army Airfield (HAAF), coastal Georgia. Simulation results for four steady-state pumping scenarios were compared to each other and to a Base Case condition. The Base Case represents year 2000 pumping rates throughout the model area, with the exception that permitted annual average pumping rates for the year 2005 were used for 26 production wells at Fort Stewart and HAAF. The four pumping scenarios focused on pumping increases at HAAF resulting from projected future demands and additional personnel stationed at the facility and on reductions in pumping at Fort Stewart. Scenarios A and B simulate 1- and 2-million-gallon-perday (Mgal/d) increases, respectively, at HAAF. Simulated water-level change maps for these scenarios indicate an area of influence that extends into parts of Bryan, Bulloch, Chatham, Effingham, and Liberty Counties, Ga., and Beaufort and Jasper Counties, S.C., with maximum drawdowns from 0.5 to 4 feet (ft) for scenario A and 1 to 8 ft for Scenario B. For scenarios C and D, increases in pumping at HAAF were offset by decreases in pumping at Fort Stewart. Scenario C represents a 1-Mgal/d increase at HAAF and a 1-Mgal/d decrease at Fort Stewart; simulated water-level changes range from 0.4 to -4 ft. Scenario D represents a 2-Mgal/d increase at HAAF and 2-Mgal/d decrease at Fort Stewart; simulated water-level changes range from 0.04 to -8 ft. The simulated water-level changes indicate an area of influence that extends into parts of Bryan, Bulloch, Chatham, Effingham, Liberty, and McIntosh Counties, Ga., and Jasper and Beaufort Counties, S.C. In general, decreasing pumping at Fort Stewart by an equivalent amount to pumping increases at HAAF

  7. Color control of a lighting system using RGBW LEDs

    NASA Astrophysics Data System (ADS)

    Tanaka, Midori; Horiuchi, Takahiko; Tominaga, Shoji

    2011-01-01

    A lighting system is proposed to render objects under a variety of colored illumination. The proposed system is constructed with a LED unit, white diffusion filters, dimmers, and a personal computer as a controller. The LED unit is composed of four kinds of color LED lamps which are 12 red (R), 14 green (G), 12 blue (B) and 10 white (W) colors. The LED lamps have a linear input-output relationship and a larger color gamut than Adobe RGB. Since the lighting system has an independent white light source, white illumination can be produced using the white light source and a mixture of RGB primary sources. Therefore, to determine illumination color we have to solve a mapping problem from 3D color space to 4D space of RGBW digital values. This paper proposes an effective algorithm for determining the digital control signals of the RGBW lights, so that colored light is generated with arbitrary (x, y) chromaticity and luminance value Y. The performance of proposed method is examined in an experiment, where the accuracy of the colored light is evaluated with regard to the CIE color difference.

  8. Early light vision isomorphic singular (ELVIS) system

    NASA Astrophysics Data System (ADS)

    Jannson, Tomasz P.; Ternovskiy, Igor V.; DeBacker, Theodore A.; Caulfield, H. John

    2000-07-01

    In the shallow water military scenarios, UUVs (Unmanned Underwater Vehicles) are required to protect assets against mines, swimmers, and other underwater military objects. It would be desirable if such UUVs could autonomously see in a similar way as humans, at least, at the primary visual cortex-level. In this paper, an attempt to such a UUV system development is proposed.

  9. Energy Integrated Lighting-Heating-Cooling System.

    ERIC Educational Resources Information Center

    Meckler, Gershon; And Others

    1964-01-01

    Energy balance problems in the design of office buildings are analyzed. Through the use of integrated systems utilizing dual purpose products, a controlled environment with minimum expenditure of energy, equipment and space can be provided. Contents include--(1) office building occupancy loads, (2) office building heating load analysis, (3) office…

  10. PS2004 Light-harvesting Systems Workshop

    SciTech Connect

    Robert E. Blankenship

    2005-11-01

    This special issue of the international scientific research journal Photosynthesis Research consists of 25 original peer-reviewed contributions from participants in the PS 2004 Lisht-Harvesting Systems Workshop. This workshop was held from 26-29, 2004 at Hotel Le Chantecler, Sainte-Adele, Quebec, Canada. The workshop was a satellite meeting of the XIII International Congress on Photosynthesis held August 29-September 3, 2004 in Montreal, Canada. The workshope dealt with all types of photosynthetic antenna systems and types of organisms, including anoxygenic photosynthetic bacteria, cyanobacteria, algae and higher plants, as well as in vitro studies of isolated pigments. This collection of papers is a good representation of the highly interdisciplinary nature of modern research on photosynthetic antenna complexes, utilizing techniques of advanced spectroscopy, biochemistry, molecular biology, synthetic chemistry and structural determination to understand these diverse and elegant molecular complexes.

  11. System Would Predictively Preempt Traffic Lights for Emergency Vehicles

    NASA Technical Reports Server (NTRS)

    Bachelder, Aaron; Foster, Conrad

    2004-01-01

    Two electronic communication-and-control systems have been proposed as means of modifying the switching of traffic lights to give priority to emergency vehicles. Both systems would utilize the inductive loops already installed in the streets of many municipalities to detect vehicles for timing the switching of traffic lights. The proposed systems could be used alone or to augment other automated emergency traffic-light preemption systems that are already present in some municipalities, including systems that recognize flashing lights or siren sounds or that utilize information on the positions of emergency vehicles derived from the Global Positioning System (GPS). Systems that detect flashing lights and siren sounds are limited in range, cannot "see" or "hear" well around corners, and are highly vulnerable to noise. GPS-based systems are effective in rural areas and small cities, but are often ineffective in large cities because of frequent occultation of GPS satellite signals by large structures. In contrast, the proposed traffic-loop forward prediction system would be relatively invulnerable to noise, would not be subject to significant range limitations, and would function well in large cities -- even in such places as underneath bridges and in tunnels, where GPS-based systems do not work. One proposed system has been characterized as "car-active" because each participating emergency vehicle would be equipped with a computer and a radio transceiver that would communicate with stationary transceivers at the traffic loops. The other proposed system has been characterized as "car-passive" because a passive radio transponder would be installed on the underside of a participating vehicle.

  12. A color management system for multi-colored LED lighting

    NASA Astrophysics Data System (ADS)

    Chakrabarti, Maumita; Thorseth, Anders; Jepsen, Jørgen; Corell, Dennis D.; Dam-Hansen, Carsten

    2015-09-01

    A new color control system is described and implemented for a five-color LED light engine, covering a wide white gamut. The system combines a new way of using pre-calibrated lookup tables and a rule-based optimization of chromaticity distance from the Planckian locus with a calibrated color sensor. The color sensor monitors the chromaticity of the mixed light providing the correction factor for the current driver by using the generated lookup table. The long term stability and accuracy of the system will be experimentally investigated with target tolerance within a circle radius of 0.0013 in the uniform chromaticity diagram (CIE1976).

  13. Asynchronous indoor positioning system based on visible light communications

    NASA Astrophysics Data System (ADS)

    Zhang, Weizhi; Chowdhury, M. I. Sakib; Kavehrad, Mohsen

    2014-04-01

    Indoor positioning has become an attractive research topic within the past two decades. However, no satisfying solution has been found with consideration of both accuracy and system complexity. Recently, research on visible light communications (VLC) offer new opportunities in realizing accurate indoor positioning with relatively simple system configuration. An indoor positioning system based on VLC technology is introduced, with no synchronization requirement on the transmitters. Simulation results show that, with over 95% confidence, the target receiver can be located with an accuracy of 5.9 cm, assuming indirect sunlight exposure and proper installation of light-emitting diode bulbs.

  14. Multispectral light metering system for cultural heritage diagnosis and conservation

    NASA Astrophysics Data System (ADS)

    Miccoli, Matteo; Melis, Marcello

    2013-05-01

    In the world of Cultural Heritage the first concern is all about Conservation of the works of art. A piece of art in bad shape is meant to deteriorate to an irreversible stage. To avoid this, quite often it's needed to go through one or more cycles of restoration to clean and consolidate the various elements of the piece. The very second concern, once the work of art is restored and in good and stable shape, is its fruition. At the end of the day why one should do all that restoration work if nobody then can access and view? Yet viewing and enjoying an artwork means that a visitor would be able to see it at its best, and this means, almost always, to have a good lighting system. Today, both restoration and fruition can greatly benefit of all the available technologies, and achieve very high level quality. The goal of this paper is the development of an exposimetric system suitable to be extremely useful as a tool for the the non invasive analysis, as well as for the lighting design and lighting systems monitoring. Many diagnosis techniques that are used before the restoration stage, require a suitable lighting system to allow to extract from the painting the maximum amount of information through the acquisition of images in the range of visible as well as UV and IR light. A standard exposimeter is for its own nature, sensitive only to the visible light, constrained by the standard photometric sensitivity curve V(lambda). A wide band exposimeter would be, on the other hand, an invaluable tool to get higher precision and to speed up multispectral wide band images acquisition, avoiding time wasting fail and try cycles to record the subject under wide spectrum conditions. The same equipment can be used to monitor the quality of the light in a expo lighting system at, for example, a museum or a gallery. The light hitting a piece of art has to allow the visitor to see and appreciate all the color shades, and to appreciate the contrast of dark and bright areas due only to

  15. Erosion and sediment control on a light railway system

    SciTech Connect

    Lancaster, T. )

    1993-06-01

    Cities throughout the country are developing light rail systems to provide environmentally friendly, hassle-free transportation for future commuters. Designed to appease growing transportation problems in metropolitan St. Louis, a light rail system was recently constructed between East St. Louis, Illinois and the St. Louis International Airport. Spatial limitations for right-of-way construction through downtown St. Louis proposed special challenges for both the design engineering firm, Sverdrup Engineering, St. Louis, and the general contractor, McCarthy Brothers, also of St. Louis. Over 14 miles of existing right-of-ways once used by passenger and freight trains would have to be utilized by the light rail system. Many sections of these vacant right-of-ways would be excavated into large depressions to allow the light rail cars to pass beneath existing bridges, eliminating rail car exposure to the surrounding environment and reducing noise pollution. However, the width of these relic right-of-ways did not provide sufficient space for modern light rail tracks. To solve this problem, designs called for the excavation of 2:1, 80-ft side slopes along the track cut to provide adequate space on the bottom for light rail track beds. This article describes the actions taken to stabilize the slopes.

  16. Improved Emergency Egress Lighting System for the ISS

    NASA Technical Reports Server (NTRS)

    Eaton, Leslie L.; Barr, Don A.

    2005-01-01

    Emergency lights provide illumination in corridors, stairwells, ramps, escalators, aisles, and exit passageways during power failures. Safety and visibility are critical during a power outage. If emergency lights fail to operate properly, the building occupants can become disoriented. Four documents in a collection discuss different topics relating to a proposed improved emergency egress lighting system (EELS) for the International Space Station (ISS). While the present EELS is designed around rows of green-light-emitting diodes, the proposed system contains strips of electroluminescent tape using different colors for each egress path. The proposed EELS can be powered by the same battery currently used by the present EELS, but would require an inverter because electroluminescent devices require AC. Electroluminescent devices also require significantly less current and, depending on the color, would emit 3 to 8 times the light of the present EELS. In addition, they could operate for up to 75 hours (versus .20 minutes for the present system). The first document contains a one-page summary of the proposal and an evaluation of technical merit. The second document summarizes the motivation for, and the design of, the proposed EELS. The third document addresses relevant aspects of the measurement of spectral sensitivity and the psychophysics of perception of light. The fourth document presents additional background information and technical specifications for the electroluminescent tapes.

  17. High-definition imaging system based on spatial light modulators with light-scattering mode

    NASA Astrophysics Data System (ADS)

    Kikuchi, Hiroshi; Fujii, Takanori; Kawakita, Masahiro; Hirano, Yoshiyuki; Fujikake, Hideo; Sato, Fumio; Takizawa, Kuniharu

    2004-01-01

    We have developed a prototype high-definition imaging system using polymer-dispersed liquid-crystal (PDLC) light valves, which can modulate unpolarized light with high spatial resolution and exhibit a high optical efficiency, based on the light-scattering effect. We fabricated high-definition light valves with a fine polymer-matrix structure in a PDLC film by controlling the curing conditions used during the photopolymerization-induced phase separation and formation process. This device has excellent characteristics, such as a high resolution, with 50 lp/mm for a limiting resolution and greater than 20 lp/mm at the 50% modulation transfer function point, and a reflectivity of greater than 60%. An optically addressable full-color projection display was designed, consisting of three PDLC light valves, a schlieren optical system based on shift-decentralization optics with a xenon lamp illumination and input-image sources with 1.5 million pixels, including electrical image compensation of the gamma characteristics. We succeeded in displaying pictures on a 110-inch screen with a resolution of 810 TV lines and a luminous flux of 1900-2100 American National Standards Institute lumens.

  18. Temporal integration of light flashes by the human circadian system

    PubMed Central

    Najjar, Raymond P.; Zeitzer, Jamie M.

    2016-01-01

    BACKGROUND. Beyond image formation, the light that is detected by retinal photoreceptors influences subcortical functions, including circadian timing, sleep, and arousal. The physiology of nonimage-forming (NIF) photoresponses in humans is not well understood; therefore, the development of therapeutic interventions based on this physiology, such as bright light therapy to treat chronobiological disorders, remains challenging. METHODS. Thirty-nine participants were exposed to 60 minutes of either continuous light (n = 8) or sequences of 2-millisecond light flashes (n = 31) with different interstimulus intervals (ISIs; ranging from 2.5 to 240 seconds). Melatonin phase shift and suppression, along with changes in alertness and sleepiness, were assessed. RESULTS. We determined that the human circadian system integrates flash sequences in a nonlinear fashion with a linear rise to a peak response (ISI = 7.6 ± 0.53 seconds) and a power function decrease following the peak of responsivity. At peak ISI, flashes were at least 2-fold more effective in phase delaying the circadian system as compared with exposure to equiluminous continuous light 3,800 times the duration. Flashes did not change melatonin concentrations or alertness in an ISI-dependent manner. CONCLUSION. We have demonstrated that intermittent light is more effective than continuous light at eliciting circadian changes. These findings cast light on the phenomenology of photic integration and suggest a dichotomous retinohypothalamic network leading to circadian phase shifting and other NIF photoresponses. Further clinical trials are required to judge the practicality of light flash protocols. TRIAL REGISTRATION. Clinicaltrials.gov NCT01119365. FUNDING. National Heart, Lung, and Blood Institute (1R01HL108441-01A1) and Department of Veterans Affairs Sierra Pacific Mental Illness Research, Education, and Clinical Center. PMID:26854928

  19. A green-light inducible lytic system for cyanobacterial cells

    PubMed Central

    2014-01-01

    Background Cyanobacteria are an attractive candidate for the production of biofuel because of their ability to capture carbon dioxide by photosynthesis and grow on non-arable land. However, because huge quantities of water are required for cultivation, strict water management is one of the greatest issues in algae- and cyanobacteria-based biofuel production. In this study, we aim to construct a lytic cyanobacterium that can be regulated by a physical signal (green-light illumination) for future use in the recovery of biofuel related compounds. Results We introduced T4 bacteriophage-derived lysis genes encoding holin and endolysin under the control of the green-light regulated cpcG2 promoter in Synechocystis sp. PCC 6803. When cells harboring the lysis genes were illuminated with both red and green light, we observed a considerable decrease in growth rate, a significant increase in cellular phycocyanin released in the medium, and a considerable fraction of dead cells. These effects were not observed when these cells were illuminated with only red light, or when cells not containing the lysis genes were grown under either red light or red and green light. These results indicate that our constructed green-light inducible lytic system was clearly induced by green-light illumination, resulting in lytic cells that released intracellular phycocyanin into the culture supernatant. This property suggests a future possibility to construct photosynthetic genetically modified organisms that are unable to survive under sunlight exposure. Expression of the self-lysis system with green-light illumination was also found to greatly increase the fragility of the cell membrane, as determined by subjecting the induced cells to detergent, osmotic-shock, and freeze-thaw treatments. Conclusions A green-light inducible lytic system was constructed in Synechocystis sp. PCC 6803. The engineered lytic cyanobacterial cells should be beneficial for the recovery of biofuels and related compounds

  20. Intersection Monitor for Traffic-Light-Preemption System

    NASA Technical Reports Server (NTRS)

    Bachelder, Aaron; Foster, Conrad

    2006-01-01

    The figure shows an intersection monitor that is a key subsystem of an emergency traffic-light-preemption system that could be any of the systems described in the three immediately preceding articles and in Systems Would Preempt Traffic Lights for Emergency Vehicles (NPO-30573), NASA Tech Briefs, Vol. 28, No. 10 (October 2004), page 36. This unit is so named because it is installed at an intersection, where it monitors the phases (in the sense of timing) of the traffic lights. The mode of operation of this monitor is independent of the type of traffic-light-controller hardware or software in use at the intersection. Moreover, the design of the monitor is such that (1) the monitor does not, by itself, affect the operation of the traffic- light controller and (2) in the event of a failure of the monitor, the trafficlight controller continues to function normally (albeit without preemption). The monitor is installed in series with the traffic-light controller at an intersection. The control signals of interest are monitored by use of high-impedance taps on affected control lines. These taps are fully isolated and further protected by high-voltage diodes that prevent any voltages or short circuits that arise within the monitor from affecting the controller. The signals from the taps are processed digitally and cleaned up by use of high-speed logic gates, and the resulting data are passed on to other parts of the traffic-light-preemption intersection subsystem. The data are compared continuously with data from vehicles and used to calculate timing for reliable preemption of the traffic lights. The pedestrian crossing at the intersection is also monitored, and pedestrians are warned not to cross during preemption.

  1. 4D light-field sensing system for people counting

    NASA Astrophysics Data System (ADS)

    Hou, Guangqi; Zhang, Chi; Wang, Yunlong; Sun, Zhenan

    2016-03-01

    Counting the number of people is still an important task in social security applications, and a few methods based on video surveillance have been proposed in recent years. In this paper, we design a novel optical sensing system to directly acquire the depth map of the scene from one light-field camera. The light-field sensing system can count the number of people crossing the passageway, and record the direction and intensity of rays at a snapshot without any assistant light devices. Depth maps are extracted from the raw light-ray sensing data. Our smart sensing system is equipped with a passive imaging sensor, which is able to naturally discern the depth difference between the head and shoulders for each person. Then a human model is built. Through detecting the human model from light-field images, the number of people passing the scene can be counted rapidly. We verify the feasibility of the sensing system as well as the accuracy by capturing real-world scenes passing single and multiple people under natural illumination.

  2. Fly-by-light flight control system technology development plan

    NASA Technical Reports Server (NTRS)

    Chakravarty, A.; Berwick, J. W.; Griffith, D. M.; Marston, S. E.; Norton, R. L.

    1990-01-01

    The results of a four-month, phased effort to develop a Fly-by-Light Technology Development Plan are documented. The technical shortfalls for each phase were identified and a development plan to bridge the technical gap was developed. The production configuration was defined for a 757-type airplane, but it is suggested that the demonstration flight be conducted on the NASA Transport Systems Research Vehicle. The modifications required and verification and validation issues are delineated in this report. A detailed schedule for the phased introduction of fly-by-light system components has been generated. It is concluded that a fiber-optics program would contribute significantly toward developing the required state of readiness that will make a fly-by-light control system not only cost effective but reliable without mitigating the weight and high-energy radio frequency related benefits.

  3. The design and evaluation of three advanced daylighting systems: Light shelves, light pipes and skylights

    SciTech Connect

    Beltran, L.O.; Lee, E.S.; Papmichael, K.M.; Selkowitz, S.E.

    1994-03-01

    We present results from the design and evaluation of three advanced daylighting systems: a light shelf, a light pipe, and a skylight. These systems use optical films and an optimized geometry to passively intercept and redirect sunlight further into the building. The objectives of these designs are to increase daylighting illuminance levels at distances of 4.6-9.1 m (15--30 ft) from the window, and to improve the uniformity of the daylight distribution and the luminance gradient across the room under variable sun and sky conditions throughout the year. The designs were developed through a series of computer-assisted ray-tracing studies, photometric measurements, and observations using physical scale models. Comprehensive sets of laboratory measurements in combination with analytical routines were then used to simulate daylight performance for any solar position. Results show increased daylight levels and an improved luminance gradient throughout the year -- indicating that lighting energy consumption and cooling energy due of lighting can be substantially reduced with improvements to visual comfort. Future development of the designs may further improve the daylighting performance of these systems.

  4. A new adaptive light beam focusing principle for scanning light stimulation systems

    SciTech Connect

    Bitzer, L. A.; Meseth, M.; Benson, N.; Schmechel, R.

    2013-02-15

    In this article a novel principle to achieve optimal focusing conditions or rather the smallest possible beam diameter for scanning light stimulation systems is presented. It is based on the following methodology: First, a reference point on a camera sensor is introduced where optimal focusing conditions are adjusted and the distance between the light focusing optic and the reference point is determined using a laser displacement sensor. In a second step, this displacement sensor is used to map the topography of the sample under investigation. Finally, the actual measurement is conducted, using optimal focusing conditions in each measurement point at the sample surface, that are determined by the height difference between camera sensor and the sample topography. This principle is independent of the measurement values, the optical or electrical properties of the sample, the used light source, or the selected wavelength. Furthermore, the samples can be tilted, rough, bent, or of different surface materials. In the following the principle is implemented using an optical beam induced current system, but basically it can be applied to any other scanning light stimulation system. Measurements to demonstrate its operation are shown, using a polycrystalline silicon solar cell.

  5. Scintillation light detection system in LArIAT

    NASA Astrophysics Data System (ADS)

    Kryczynski, P.

    2016-02-01

    The LArIAT experiment is currently taking data at Fermilab using a Liquid Argon TPC, with the aim of studying particle interactions and characterizing detector response for neutrino detectors using argon. In parallel, it serves as a test-bench to develop and evaluate the performance of the simulation, reconstruction, and analysis software used in LAr neutrino experiments. LArIAT also takes advantage of the scintillating capabilities of liquid argon and will evaluate the feasibility of using the light signal to determine calorimetric information and particle identification. To test this possibility, a scintillation light detection system consisting of high Quantum Efficiency (QE) PMT and Silicon Photomultiplier (SiPM) devices is installed in the cryostat, viewing the interior of the TPC. Light collection efficiency is maximized by means of lining the walls with reflector foils covered by a wavelength shifter layer. Collecting the light reflected at the boundaries of the active volume greatly improves also the uniformity of the light yield. Presented here are initial results of the LArIAT light detection system calibration together with the preliminary results of the dedicated simulation and its application in future LAr TPC experiments

  6. The Advanced Light Source (ALS) Radiation Safety System. Revised

    SciTech Connect

    Ritchie, A.L.; Oldfather, D.E.; Lindner, A.F.

    1993-08-01

    The Advanced Light Source (ALS) at the Lawrence Berkeley Laboratory (LBL) is a 1.5 Gev synchrotron light source facility consisting of a 120 kev electron gun, 50 Mev linear accelerator, 1.5 Gev booster synchrotron, 200 meter circumference electron storage ring, and many photon beamline transport systems for research. Figure 1. ALS floor plan. Pairs of neutron and gamma radiation monitors are shown as dots numbered from 1 to 12. The Radiation Safety System for the ALS has been designed and built with a primary goal of providing protection against inadvertent personnel exposure to gamma and neutron radiation and, secondarily, to enhance the electrical safety of select magnet power supplies.

  7. An All Fiber White Light Interferometric Absolute Temperature Measurement System

    PubMed Central

    Kim, Jeonggon Harrison

    2008-01-01

    Recently the author of this article proposed a new signal processing algorithm for an all fiber white light interferometer. In this article, an all fiber white light interferometric absolute temperature measurement system is presented using the previously proposed signal processing algorithm. Stability and absolute temperature measurement were demonstrated. These two tests demonstrated the feasibility of absolute temperature measurement with an accuracy of 0.015 fringe and 0.0005 fringe, respectively. A hysteresis test from 373K to 873K was also presented. Finally, robustness of the sensor system towards laser diode temperature drift, AFMZI temperature drift and PZT non-linearity was demonstrated.

  8. Structured light system for teleautonomous and telecollaborative manipulation

    NASA Astrophysics Data System (ADS)

    Park, Young S.; Kang, Hyosig; Ewing, Thomas F.

    2003-10-01

    This paper addresses the implementation of sensory basis to support enhanced teleoperation. By adopting multiple structured light systems, each of which consists of a camera and patterned beam projector, the sensor basis supposedly provides an added level of flexibility and adaptability to variable and unstructured task conditions. The technological innovations include calibration of multiple structured light systems and on-line 3D pose measurement. The application of sensory basis is demonstrated for two types of enhanced teleoperation, namely tele-autonomy and tele-collaboration. The sensory information aids in tele-autonomy by generating autonomous motions, and is utilized in tele-collaboration for generating virtual fixtures.

  9. Continuous quantum measurement of a light-matter system

    SciTech Connect

    Zhao, R.; Jenkins, S. D.; Campbell, C. J.; Kennedy, T. A. B.; Kuzmich, A.; Matsukevich, D. N.; Chaneliere, T.

    2010-03-15

    Continuous measurements on correlated quantum systems, in addition to providing information on the state vector of the system in question, induce evolution in the unmeasured degrees of freedom conditioned on the measurement outcome. However, experimentally accessing these nontrivial regimes requires high-efficiency measurements over time scales much longer than the temporal resolution of the measurement apparatus. We report the observation of such a continuous conditioned evolution in the state of a light-collective atomic excitation system undergoing photoelectric measurement.

  10. Light communication systems. Citations from the NTIS data base

    NASA Astrophysics Data System (ADS)

    Reed, W. E.

    1980-09-01

    The design, performance, and application of laser, infrared, and visual communication systems are covered in the cited research reports. Transmission and equipment studies for space, atmospheric, and underwater light communication are presented. Topics covered include lasers, fiber optics, signal processing, transmission links, and data transmission. This updated bibliography contains 87 citations, 59 of which are new entries to the previous edition.

  11. Reactor system for upgrading light olefins in staged reactors

    SciTech Connect

    Harandi, M.N.; Owen, H.

    1991-05-28

    This patent describes a semicontinuous multistage catalytic system for conversion of light olefinic gas feedstock to distillate range hydrocarbons. It comprises: a first reactor means; means for passing hot feedstock vapor upwardly; fluid handling means; means for recovering from primary stage effluent stream; second reactor means; and fluid handling means for periodically interrupting flow.

  12. The design of freeform surface lens for LED lighting system

    NASA Astrophysics Data System (ADS)

    Bao, Zhi-cong; Zhu, Jun; Xiong, Si-si; Jin, Guo-fan

    2013-08-01

    LED has many advantages, such as high luminous efficiency, small size, low-voltage DC drive, etc. so it has been widely used in many lighting situations. But in certain circumstances, such as uniform illumination requirements in the micro-display projection system, because LED has an analogous Lambertian radiation distribution resulting in its non-uniform light intensity, the secondary optical design should be done to achieve the specific illumination requirements. In this paper, a freeform surface lens is designed to obtain a square area with uniform illumination on the target plane with LED: Firstly, based on the law of conservation of energy, the source-target light energy mapping relationship between the incident plane and the target plane is achieved. Secondly, according to the vector form of Snell's law, the differential equations of the freeform surface are established. Finally, in order to solve the problem of surface discontinuity during the progress of designing the lens, the process of solving the differential equations is described in detail and the integrability condition is introduced to modify and adjust the points' position of freeform surface, thus reducing the errors accumulating during the progress of numerical calculation and improving the continuity of the freeform surface. By simulation, the continuity of the freeform surface and the uniform illumination improve a lot, so it is validated that the results meet the requirements and the design method using integrability condition can improve the continuity of the surface and lighting uniformity of the lighting system.

  13. Design and performance of an integrated envelope/lighting system

    SciTech Connect

    Lee, E.S.; Selkowitz, S.E.

    1997-04-01

    Dynamic envelope/lighting systems offer the potential to achieve a near optimum energy-efficient environment meeting occupant needs throughout the year by adapting to dynamic meteorological conditions and changing occupant preferences in real time. With the dramatic increased functionality of the microprocessor, there is an untapped potential to make dynamic envelop/lighting systems easier to use, diagnose, and monitor, and to integrate them as part of a sophisticated building-wide control system. This study addresses the complex relationship between this energy-efficiency technology and many of the non-energy issues related to its potential acceptance by the building industry, architects, owners, and users. The authors demonstrate the concept of integrated dynamic systems with a prototype motorized venetian blind operated in synchronization with electric lighting and daylighting controls via an intelligent control system. Research work conducted with simulation software and reduced-scale and full-scale field tests is summarized. Much of this work is directly relevant to other active shading and daylighting systems on the market today and to state-of-the-art window systems yet to come (i.e., electrochromics).

  14. Solar concentrator with integrated tracking and light delivery system with collimation

    DOEpatents

    Maxey, Lonnie Curt

    2015-06-09

    A solar light distribution system includes a solar light concentrator that is affixed externally to a light transfer tube. Solar light waves are processed by the concentrator into a collimated beam of light, which is then transferred through a light receiving port and into the light transfer tube. A reflector directs the collimated beam of light through the tube to a light distribution port. The interior surface of the light transfer tube is highly reflective so that the light transfers through the tube with minimal losses. An interchangeable luminaire is attached to the light distribution port and distributes light inside of a structure. A sun tracking device rotates the concentrator and the light transfer tube to optimize the receiving of solar light by the concentrator throughout the day. The system provides interior lighting, uses only renewable energy sources, and releases no carbon dioxide emissions into the atmosphere.

  15. Solar concentrator with integrated tracking and light delivery system with summation

    DOEpatents

    Maxey, Lonnie Curt

    2015-05-05

    A solar light distribution system includes a solar light concentrator that is affixed externally to a light transfer tube. Solar light waves are processed by the concentrator into a collimated beam of light, which is then transferred through a light receiving port and into the light transfer tube. A reflector redirects the collimated beam of light through the tube to a light distribution port. The interior surface of the light transfer tube is highly reflective so that the light transfers through the tube with minimal losses. An interchangeable luminaire is attached to the light distribution port and provides light inside of a structure. A sun tracking device rotates the concentrator and the light transfer tube to optimize the receiving of solar light by the concentrator throughout the day. The system provides interior lighting that uses only renewable energy sources, and releases no carbon dioxide emissions into the atmosphere.

  16. The cinema LED lighting system design based on SCM

    NASA Astrophysics Data System (ADS)

    En, De; Wang, Xiaobin

    2010-11-01

    A LED lighting system in the modern theater and the corresponding control program is introduced. Studies show that moderate and mutative brightness in the space would attract audiences' attention on the screen easily. SCM controls LED dynamically by outputting PWM pulse in different duty cycle. That cinema dome lights' intensity can vary with the plot changed, make people get a better view of experience. This article expounds the architecture of hardware system in the schedule and the control flow of the host of the solution. Besides, it introduces the design of software as well. At last, the system which is proved energy-saving, reliable, good visual effect and having using value by means of producing a small-scale model, which reproduce the whole system and achieves the desired result.

  17. Study of the Light Received Characteristics of a Plant-Shoot-Light-Condensing System with Simple Leaves or Lobed Leaves

    NASA Astrophysics Data System (ADS)

    Obara, Shin'ya

    Plant shoot configurations evolve so that maximum sunlight may be obtained. The objective of this study is to develop a compact light-condensing system mimicking a plant shoot configuration that is applicable to a light source from a large area. In this paper, the relationship between the position of a light source (the sun) and the rate at which light is absorbed by each leaf was investigated in detail for plant shoot models of a dogwood (simple leaf) and a ginkgo tree (lobed leaf). The rate of light quantum received in each leaf model is reported to an analysis program that uses cross entropy (CE). The analyses showed that the peak amount of light received in the plant-shoot-light-condensing system was during February (vernal equinox) and October (autumnal equinox). Similarly, the rate of light quantum received in each leaf was measured with the CE. The results found that the plant-shoot-light-condensing system that maximizes the amount of light received has differences in the light received in each leaf. Furthermore, the light-condensing characteristics of the ginkgo biloba model are better than the dogwood model. The light-condensing characteristics of a leaf are influenced by the size, a lobe, shape, and the length of the branch.

  18. Two Modules Of A Fly-By-Light System

    NASA Technical Reports Server (NTRS)

    Palumbo, Daniel L.

    1993-01-01

    Proposed fly-by-light/power-by-wire control system for commercial aircraft designed on basis of fault-tolerant transmission of digital control data along fiber-optic paths. Important novel features of system embodied in two modules. Redundancy-management unit (RMU) performs fault-tolerance functions. Fiber-optic serial backplane (FOSB) is high-speed fault-tolerant time-division-multiplex data bus with fiber-optic transmission.

  19. SETI via Leakage from Light Sails in Exoplanetary Systems

    NASA Astrophysics Data System (ADS)

    Guillochon, James; Loeb, Abraham

    2015-10-01

    The primary challenge of rocket propulsion is the burden of needing to accelerate the spacecraft’s own fuel, resulting in only a logarithmic gain in maximum speed as propellant is added to the spacecraft. Light sails offer an attractive alternative in which fuel is not carried by the spacecraft, with acceleration being provided by an external source of light. By artificially illuminating the spacecraft with beamed radiation, speeds are only limited by the area of the sail, heat resistance of its material, and power use of the accelerating apparatus. In this paper, we show that leakage from a light sail propulsion apparatus in operation around a solar system analogue would be detectable. To demonstrate this, we model the launch and arrival of a microwave beam-driven light sail constructed for transit between planets in orbit around a single star, and find an optimal beam frequency on the order of tens of GHz. Leakage from these beams yields transients with flux densities of Jy and durations of tens of seconds at 100 pc. Because most travel within a planetary system would be conducted between the habitable worlds within that system, multiply transiting exoplanetary systems offer the greatest chance of detection, especially when the planets are in projected conjunction as viewed from Earth. If interplanetary travel via beam-driven light sails is commonly employed in our galaxy, this activity could be revealed by radio follow-up of nearby transiting exoplanetary systems. The expected signal properties define a new strategy in the search for extraterrestrial intelligence (SETI).

  20. SETI VIA LEAKAGE FROM LIGHT SAILS IN EXOPLANETARY SYSTEMS

    SciTech Connect

    Guillochon, James; Loeb, Abraham E-mail: aloeb@cfa.harvard.edu

    2015-10-01

    The primary challenge of rocket propulsion is the burden of needing to accelerate the spacecraft’s own fuel, resulting in only a logarithmic gain in maximum speed as propellant is added to the spacecraft. Light sails offer an attractive alternative in which fuel is not carried by the spacecraft, with acceleration being provided by an external source of light. By artificially illuminating the spacecraft with beamed radiation, speeds are only limited by the area of the sail, heat resistance of its material, and power use of the accelerating apparatus. In this paper, we show that leakage from a light sail propulsion apparatus in operation around a solar system analogue would be detectable. To demonstrate this, we model the launch and arrival of a microwave beam-driven light sail constructed for transit between planets in orbit around a single star, and find an optimal beam frequency on the order of tens of GHz. Leakage from these beams yields transients with flux densities of Jy and durations of tens of seconds at 100 pc. Because most travel within a planetary system would be conducted between the habitable worlds within that system, multiply transiting exoplanetary systems offer the greatest chance of detection, especially when the planets are in projected conjunction as viewed from Earth. If interplanetary travel via beam-driven light sails is commonly employed in our galaxy, this activity could be revealed by radio follow-up of nearby transiting exoplanetary systems. The expected signal properties define a new strategy in the search for extraterrestrial intelligence (SETI)

  1. Status report on the Advanced Light Source control system, 1993

    SciTech Connect

    Young, J.; Brown, W. Jr.; Cork, C.

    1993-10-01

    The Advanced Light Source (ALS), under construction for the past seven years, has become operational. The accelerator has been successfully commissioned using a control system based on hundreds of controllers of our own design and high performance personal computers which are the operator interface. The first beamlines are being commissioned using a control system based on VME hardware and the Experimental Physics and Industrial Control System (EPICS) software. The two systems are being integrated, and this paper reports on the current work being done.

  2. 46 CFR 25.45-1 - Heating and lighting systems on vessels carrying passengers for hire.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 1 2014-10-01 2014-10-01 false Heating and lighting systems on vessels carrying... UNINSPECTED VESSELS REQUIREMENTS Cooking, Heating, and Lighting Systems § 25.45-1 Heating and lighting systems on vessels carrying passengers for hire. (a) No fuel may be used in any heating or lighting system...

  3. 46 CFR 25.45-1 - Heating and lighting systems on vessels carrying passengers for hire.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 1 2011-10-01 2011-10-01 false Heating and lighting systems on vessels carrying... UNINSPECTED VESSELS REQUIREMENTS Cooking, Heating, and Lighting Systems § 25.45-1 Heating and lighting systems on vessels carrying passengers for hire. (a) No fuel may be used in any heating or lighting system...

  4. 46 CFR 25.45-1 - Heating and lighting systems on vessels carrying passengers for hire.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 1 2012-10-01 2012-10-01 false Heating and lighting systems on vessels carrying... UNINSPECTED VESSELS REQUIREMENTS Cooking, Heating, and Lighting Systems § 25.45-1 Heating and lighting systems on vessels carrying passengers for hire. (a) No fuel may be used in any heating or lighting system...

  5. 46 CFR 25.45-1 - Heating and lighting systems on vessels carrying passengers for hire.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 1 2013-10-01 2013-10-01 false Heating and lighting systems on vessels carrying... UNINSPECTED VESSELS REQUIREMENTS Cooking, Heating, and Lighting Systems § 25.45-1 Heating and lighting systems on vessels carrying passengers for hire. (a) No fuel may be used in any heating or lighting system...

  6. 46 CFR 25.45-1 - Heating and lighting systems on vessels carrying passengers for hire.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Heating and lighting systems on vessels carrying... UNINSPECTED VESSELS REQUIREMENTS Cooking, Heating, and Lighting Systems § 25.45-1 Heating and lighting systems on vessels carrying passengers for hire. (a) No fuel may be used in any heating or lighting system...

  7. A new dump system design for stray light reduction of Thomson scattering diagnostic system on EAST.

    PubMed

    Xiao, Shumei; Zang, Qing; Han, Xiaofeng; Wang, Tengfei; Yu, Jin; Zhao, Junyu

    2016-07-01

    Thomson scattering (TS) diagnostic is an important diagnostic for measuring electron temperature and density during plasma discharge. However, the measurement of Thomson scattering signal is disturbed by the stray light easily. The stray light sources in the Experimental Advanced Superconducting Tokamak (EAST) TS diagnostic system were analyzed by a simulation model of the diagnostic system, and simulation results show that the dump system is the primary stray light source. Based on the optics theory and the simulation analysis, a novel dump system including an improved beam trap was proposed and installed. The measurement results indicate that the new dump system can reduce more than 60% of the stray light for the diagnostic system, and the influence of stray light on the error of measured density decreases. PMID:27475558

  8. A new dump system design for stray light reduction of Thomson scattering diagnostic system on EAST

    NASA Astrophysics Data System (ADS)

    Xiao, Shumei; Zang, Qing; Han, Xiaofeng; Wang, Tengfei; Yu, Jin; Zhao, Junyu

    2016-07-01

    Thomson scattering (TS) diagnostic is an important diagnostic for measuring electron temperature and density during plasma discharge. However, the measurement of Thomson scattering signal is disturbed by the stray light easily. The stray light sources in the Experimental Advanced Superconducting Tokamak (EAST) TS diagnostic system were analyzed by a simulation model of the diagnostic system, and simulation results show that the dump system is the primary stray light source. Based on the optics theory and the simulation analysis, a novel dump system including an improved beam trap was proposed and installed. The measurement results indicate that the new dump system can reduce more than 60% of the stray light for the diagnostic system, and the influence of stray light on the error of measured density decreases.

  9. Metallic halide lights and lighting systems. (Latest citations from the US Patent Bibliographic file with exemplary claims). Published Search

    SciTech Connect

    Not Available

    1994-11-01

    The bibliography contains citations of selected patents concerning the design and operation of metallic halide lights and lighting systems. High pressure, high intensity, and low wattage discharge lamps are described. Citations discuss power sources, lamp life, lamp control circuits, thermal switches, and heat reflective coatings. Applications in sport stadium lighting, vehicle headlights, and crop-lighting are included. (Contains a minimum of 170 citations and includes a subject term index and title list.)

  10. Design of the optocoupler applied to medical lighting systems.

    PubMed

    Yang, Xibin; Lit, Rui; Zhu, Jianfeng; Xiong, Daxi

    2012-12-01

    A new type of optocoupler applied to medical lighting system is proposed, and the principle, Etendue and design process is introduced. With the help of Tracrpro, modeling and simulation of the optocoupler is conducted and the parameters are optimized. Analysis of factors affecting the energy coupling efficiency is done. With a view towards the development of Ultra High Brightness Light Emitting Diodes (UHB-LEDs), which play an important role a new sources of lighting in various biomedical devices, including those used in diagnosis and treatment, a series of simulations are executed and a variety of solutions are achieved. According to simulation results, the design target of coupling efficiency is achieved and the optical uniformity is also significantly improved. According to the result of theoretical analysis, verification experiments are designed and simulation results are verified. The optocoupler, which has simple structure, compact size and low cost, is suitable for applications in the field of low-cost medical domain.

  11. 14 CFR 25.1385 - Position light system installation.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ....1397. (b) Forward position lights. Forward position lights must consist of a red and a green light... airplane in the normal flying position, the red light is on the left side and the green light is on the...) Light covers and color filters. Each light cover or color filter must be at least flame resistant...

  12. Optimal Energy Transfer in Light-Harvesting Systems.

    PubMed

    Chen, Lipeng; Shenai, Prathamesh; Zheng, Fulu; Somoza, Alejandro; Zhao, Yang

    2015-08-20

    Photosynthesis is one of the most essential biological processes in which specialized pigment-protein complexes absorb solar photons, and with a remarkably high efficiency, guide the photo-induced excitation energy toward the reaction center to subsequently trigger its conversion to chemical energy. In this work, we review the principles of optimal energy transfer in various natural and artificial light harvesting systems. We begin by presenting the guiding principles for optimizing the energy transfer efficiency in systems connected to dissipative environments, with particular attention paid to the potential role of quantum coherence in light harvesting systems. We will comment briefly on photo-protective mechanisms in natural systems that ensure optimal functionality under varying ambient conditions. For completeness, we will also present an overview of the charge separation and electron transfer pathways in reaction centers. Finally, recent theoretical and experimental progress on excitation energy transfer, charge separation, and charge transport in artificial light harvesting systems is delineated, with organic solar cells taken as prime examples.

  13. Optimal Energy Transfer in Light-Harvesting Systems.

    PubMed

    Chen, Lipeng; Shenai, Prathamesh; Zheng, Fulu; Somoza, Alejandro; Zhao, Yang

    2015-01-01

    Photosynthesis is one of the most essential biological processes in which specialized pigment-protein complexes absorb solar photons, and with a remarkably high efficiency, guide the photo-induced excitation energy toward the reaction center to subsequently trigger its conversion to chemical energy. In this work, we review the principles of optimal energy transfer in various natural and artificial light harvesting systems. We begin by presenting the guiding principles for optimizing the energy transfer efficiency in systems connected to dissipative environments, with particular attention paid to the potential role of quantum coherence in light harvesting systems. We will comment briefly on photo-protective mechanisms in natural systems that ensure optimal functionality under varying ambient conditions. For completeness, we will also present an overview of the charge separation and electron transfer pathways in reaction centers. Finally, recent theoretical and experimental progress on excitation energy transfer, charge separation, and charge transport in artificial light harvesting systems is delineated, with organic solar cells taken as prime examples. PMID:26307957

  14. PS2013 Satellite Workshop on Photosynthetic Light-Harvesting Systems

    SciTech Connect

    Niederman, Robert A.; Blankenship, Robert E.; Frank, Harry A.

    2015-02-07

    These funds were used for partial support of the PS2013 Satellite Workshop on Photosynthetic Light-Harvesting Systems, that was held on 8-11 August, 2013, at Washington University, St. Louis, MO. This conference, held in conjunction with the 16th International Congress on Photosynthesis/St. Louis, continued a long tradition of light-harvesting satellite conferences that have been held prior to the previous six international photosynthesis congresses. In this Workshop, the basis was explored for the current interest in replacing fossil fuels with energy sources derived form direct solar radiation, coupled with light-driven electron transport in natural photosynthetic systems and how they offer a valuable blueprint for conversion of sunlight to useful energy forms. This was accomplished through sessions on the initial light-harvesting events in the biological conversion of solar energy to chemically stored energy forms, and how these natural photosynthetic processes serve as a guide to the development of robust bio-hybrid and artificial systems for solar energy conversion into both electricity or chemical fuels. Organized similar to a Gordon Research Conference, a lively, informal and collegial setting was established, highlighting the exchange of exciting new data and unpublished results from ongoing studies. A significant amount of time was set aside for open discussion and interactive poster sessions, with a special session devoted to oral presentations by talented students and postdoctoral fellows judged to have the best posters. This area of research has seen exceptionally rapid progress in recent years, with the availability of a number of antenna protein structures at atomic resolution, elucidation of the molecular surface architecture of native photosynthetic membranes by atomic force microscopy and the maturing of ultrafast spectroscopic and molecular biological techniques for the investigation and manipulation of photosynthetic systems. The conferees

  15. Relationship between Human Pupillary Light Reflex and Circadian System Status.

    PubMed

    Bonmati-Carrion, Maria Angeles; Hild, Konstanze; Isherwood, Cheryl; Sweeney, Stephen J; Revell, Victoria L; Skene, Debra J; Rol, Maria Angeles; Madrid, Juan Antonio

    2016-01-01

    Intrinsically photosensitive retinal ganglion cells (ipRGCs), whose photopigment melanopsin has a peak of sensitivity in the short wavelength range of the spectrum, constitute a common light input pathway to the olivary pretectal nucleus (OPN), the pupillary light reflex (PLR) regulatory centre, and to the suprachiasmatic nuclei (SCN), the major pacemaker of the circadian system. Thus, evaluating PLR under short wavelength light (λmax ≤ 500 nm) and creating an integrated PLR parameter, as a possible tool to indirectly assess the status of the circadian system, becomes of interest. Nine monochromatic, photon-matched light stimuli (300 s), in 10 nm increments from λmax 420 to 500 nm were administered to 15 healthy young participants (8 females), analyzing: i) the PLR; ii) wrist temperature (WT) and motor activity rhythms (WA), iii) light exposure (L) pattern and iv) diurnal preference (Horne-Östberg), sleep quality (Pittsburgh) and daytime sleepiness (Epworth). Linear correlations between the different PLR parameters and circadian status index obtained from WT, WA and L recordings and scores from questionnaires were calculated. In summary, we found markers of robust circadian rhythms, namely high stability, reduced fragmentation, high amplitude, phase advance and low internal desynchronization, were correlated with a reduced PLR to 460-490 nm wavelengths. Integrated circadian (CSI) and PLR (cp-PLR) parameters are proposed, that also showed an inverse correlation. These results demonstrate, for the first time, the existence of a close relationship between the circadian system robustness and the pupillary reflex response, two non-visual functions primarily under melanopsin-ipRGC input. PMID:27636197

  16. Relationship between Human Pupillary Light Reflex and Circadian System Status

    PubMed Central

    Bonmati-Carrion, Maria Angeles; Hild, Konstanze; Isherwood, Cheryl; Sweeney, Stephen J.; Revell, Victoria L.; Skene, Debra J.; Rol, Maria Angeles; Madrid, Juan Antonio

    2016-01-01

    Intrinsically photosensitive retinal ganglion cells (ipRGCs), whose photopigment melanopsin has a peak of sensitivity in the short wavelength range of the spectrum, constitute a common light input pathway to the olivary pretectal nucleus (OPN), the pupillary light reflex (PLR) regulatory centre, and to the suprachiasmatic nuclei (SCN), the major pacemaker of the circadian system. Thus, evaluating PLR under short wavelength light (λmax ≤ 500 nm) and creating an integrated PLR parameter, as a possible tool to indirectly assess the status of the circadian system, becomes of interest. Nine monochromatic, photon-matched light stimuli (300 s), in 10 nm increments from λmax 420 to 500 nm were administered to 15 healthy young participants (8 females), analyzing: i) the PLR; ii) wrist temperature (WT) and motor activity rhythms (WA), iii) light exposure (L) pattern and iv) diurnal preference (Horne-Östberg), sleep quality (Pittsburgh) and daytime sleepiness (Epworth). Linear correlations between the different PLR parameters and circadian status index obtained from WT, WA and L recordings and scores from questionnaires were calculated. In summary, we found markers of robust circadian rhythms, namely high stability, reduced fragmentation, high amplitude, phase advance and low internal desynchronization, were correlated with a reduced PLR to 460–490 nm wavelengths. Integrated circadian (CSI) and PLR (cp-PLR) parameters are proposed, that also showed an inverse correlation. These results demonstrate, for the first time, the existence of a close relationship between the circadian system robustness and the pupillary reflex response, two non-visual functions primarily under melanopsin-ipRGC input. PMID:27636197

  17. The second post-Newtonian light propagation and its astrometric measurement in the Solar System: Light time and frequency shift

    NASA Astrophysics Data System (ADS)

    Deng, Xue-Mei

    2016-05-01

    The light time equation and frequency shift are worked out in the framework of a second parametrized post-Newtonian (2PPN) formalism in the Solar System barycentric reference system (SSBRS) developed in a recently published paper. Effects of each body’s oblateness, spin and translational motion are taken into account for the light propagation. It is found that, at the second post-Newtonian (2PN) approximation, the light time and frequency shift depend on the parameter η only.

  18. Smart adaptive optic systems using spatial light modulators.

    PubMed

    Clark, N; Banish, M; Ranganath, H S

    1999-01-01

    Many factors contribute to the aberrations induced in an optical system. Atmospheric turbulence between the object and the imaging system, physical or thermal perturbations in optical elements degrade the system's point spread function, and misaligned optics are the primary sources of aberrations that affect image quality. The design of a nonconventional real-time adaptive optic system using a micro-mirror device for wavefront correction is presented. The unconventional compensated imaging system presented offers advantages in speed, cost, power consumption, and weight. A pulsed-coupled neural network is used to as a preprocessor to enhance the performance of the wavefront sensor for low-light applications. Modeling results that characterize the system performance are presented. PMID:18252558

  19. Fast frame scanning camera system for light-sheet microscopy.

    PubMed

    Wu, Di; Zhou, Xing; Yao, Baoli; Li, Runze; Yang, Yanlong; Peng, Tong; Lei, Ming; Dan, Dan; Ye, Tong

    2015-10-10

    In the interest of improving the temporal resolution for light-sheet microscopy, we designed a fast frame scanning camera system that incorporated a galvanometer scanning mirror into the imaging path of a home-built light-sheet microscope. This system transformed a temporal image sequence to a spatial one so that multiple images could be acquired during one exposure period. The improvement factor of the frame rate was dependent on the number of sub-images that could be tiled on the sensor without overlapping each other and was therefore a trade-off with the image size. As a demonstration, we achieved 960 frames/s (fps) on a CCD camera that was originally capable of recording images at only 30 fps (full frame). This allowed us to observe millisecond or sub-millisecond events with ordinary CCD cameras.

  20. A compact light readout system for longitudinally segmented shashlik calorimeters

    NASA Astrophysics Data System (ADS)

    Berra, A.; Brizzolari, C.; Cecchini, S.; Cindolo, F.; Jollet, C.; Longhin, A.; Ludovici, L.; Mandrioli, G.; Mauri, N.; Meregaglia, A.; Paoloni, A.; Pasqualini, L.; Patrizii, L.; Pozzato, M.; Pupilli, F.; Prest, M.; Sirri, G.; Terranova, F.; Vallazza, E.; Votano, L.

    2016-09-01

    The longitudinal segmentation of shashlik calorimeters is challenged by dead zones and non-uniformities introduced by the light collection and readout system. This limitation can be overcome by direct fiber-photosensor coupling, avoiding routing and bundling of the wavelength shifter fibers and embedding ultra-compact photosensors (SiPMs) in the bulk of the calorimeter. We present the first experimental test of this readout scheme performed at the CERN PS-T9 beamline in 2015 with negative particles in the 1-5 GeV energy range. In this paper, we demonstrate that the scheme does not compromise the energy resolution and linearity compared with standard light collection and readout systems. In addition, we study the performance of the calorimeter for partially contained charged hadrons to assess the e / π separation capability and the response of the photosensors to direct ionization.

  1. Fast frame scanning camera system for light-sheet microscopy.

    PubMed

    Wu, Di; Zhou, Xing; Yao, Baoli; Li, Runze; Yang, Yanlong; Peng, Tong; Lei, Ming; Dan, Dan; Ye, Tong

    2015-10-10

    In the interest of improving the temporal resolution for light-sheet microscopy, we designed a fast frame scanning camera system that incorporated a galvanometer scanning mirror into the imaging path of a home-built light-sheet microscope. This system transformed a temporal image sequence to a spatial one so that multiple images could be acquired during one exposure period. The improvement factor of the frame rate was dependent on the number of sub-images that could be tiled on the sensor without overlapping each other and was therefore a trade-off with the image size. As a demonstration, we achieved 960 frames/s (fps) on a CCD camera that was originally capable of recording images at only 30 fps (full frame). This allowed us to observe millisecond or sub-millisecond events with ordinary CCD cameras. PMID:26479797

  2. Plant lighting system with five wavelength-band light-emitting diodes providing photon flux density and mixing ratio control

    PubMed Central

    2012-01-01

    Background Plant growth and development depend on the availability of light. Lighting systems therefore play crucial roles in plant studies. Recent advancements of light-emitting diode (LED) technologies provide abundant opportunities to study various plant light responses. The LED merits include solidity, longevity, small element volume, radiant flux controllability, and monochromaticity. To apply these merits in plant light response studies, a lighting system must provide precisely controlled light spectra that are useful for inducing various plant responses. Results We have developed a plant lighting system that irradiated a 0.18 m2 area with a highly uniform distribution of photon flux density (PFD). The average photosynthetic PFD (PPFD) in the irradiated area was 438 micro-mol m–2 s–1 (coefficient of variation 9.6%), which is appropriate for growing leafy vegetables. The irradiated light includes violet, blue, orange-red, red, and far-red wavelength bands created by LEDs of five types. The PFD and mixing ratio of the five wavelength-band lights are controllable using a computer and drive circuits. The phototropic response of oat coleoptiles was investigated to evaluate plant sensitivity to the light control quality of the lighting system. Oat coleoptiles irradiated for 23 h with a uniformly distributed spectral PFD (SPFD) of 1 micro-mol m–2 s–1 nm–1 at every peak wavelength (405, 460, 630, 660, and 735 nm) grew almost straight upwards. When they were irradiated with an SPFD gradient of blue light (460 nm peak wavelength), the coleoptiles showed a phototropic curvature in the direction of the greater SPFD of blue light. The greater SPFD gradient induced the greater curvature of coleoptiles. The relation between the phototropic curvature (deg) and the blue-light SPFD gradient (micro-mol m–2 s–1 nm–1 m–1) was 2 deg per 1 micro-mol m–2 s–1 nm–1 m–1. Conclusions The plant lighting system, with a computer with a graphical user interface

  3. 33 CFR 150.519 - What are the requirements for emergency lighting and power systems?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... emergency lighting and power systems? 150.519 Section 150.519 Navigation and Navigable Waters COAST GUARD... Specialty Equipment Emergency Lighting and Power Systems § 150.519 What are the requirements for emergency lighting and power systems? (a) The operator must test and inspect the emergency lighting and power...

  4. 33 CFR 150.519 - What are the requirements for emergency lighting and power systems?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... emergency lighting and power systems? 150.519 Section 150.519 Navigation and Navigable Waters COAST GUARD... Specialty Equipment Emergency Lighting and Power Systems § 150.519 What are the requirements for emergency lighting and power systems? (a) The operator must test and inspect the emergency lighting and power...

  5. 33 CFR 150.519 - What are the requirements for emergency lighting and power systems?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... emergency lighting and power systems? 150.519 Section 150.519 Navigation and Navigable Waters COAST GUARD... Specialty Equipment Emergency Lighting and Power Systems § 150.519 What are the requirements for emergency lighting and power systems? (a) The operator must test and inspect the emergency lighting and power...

  6. 33 CFR 150.519 - What are the requirements for emergency lighting and power systems?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... emergency lighting and power systems? 150.519 Section 150.519 Navigation and Navigable Waters COAST GUARD... Specialty Equipment Emergency Lighting and Power Systems § 150.519 What are the requirements for emergency lighting and power systems? (a) The operator must test and inspect the emergency lighting and power...

  7. 33 CFR 150.519 - What are the requirements for emergency lighting and power systems?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... emergency lighting and power systems? 150.519 Section 150.519 Navigation and Navigable Waters COAST GUARD... Specialty Equipment Emergency Lighting and Power Systems § 150.519 What are the requirements for emergency lighting and power systems? (a) The operator must test and inspect the emergency lighting and power...

  8. Portable light transmission measuring system for preserved corneas

    PubMed Central

    Ventura, Liliane; de Jesus, Gabriel Torres; de Oliveira, Gunter Camilo Dablas; Sousa, Sidney JF

    2005-01-01

    Background The authors have developed a small portable device for the objective measurement of the transparency of corneas stored in preservative medium, for use by eye banks in evaluation prior to transplantation. Methods The optical system consists of a white light, lenses, and pinholes that collimate the white light beams and illuminate the cornea in its preservative medium, and an optical filter (400–700 nm) that selects the range of the wavelength of interest. A sensor detects the light that passes through the cornea, and the average corneal transparency is displayed. In order to obtain only the tissue transparency, an electronic circuit was built to detect a baseline input of the preservative medium prior to the measurement of corneal transparency. The operation of the system involves three steps: adjusting the "0 %" transmittance of the instrument, determining the "100 %" transmittance of the system, and finally measuring the transparency of the preserved cornea inside the storage medium. Results Fifty selected corneas were evaluated. Each cornea was submitted to three evaluation methods: subjective classification of transparency through a slit lamp, quantification of the transmittance of light using a corneal spectrophotometer previously developed, and measurement of transparency with the portable device. Conclusion By comparing the three methods and using the expertise of eye bank trained personnel, a table for quantifying corneal transparency with the new device has been developed. The correlation factor between the corneal spectrophotometer and the new device is 0,99813, leading to a system that is able to standardize transparency measurements of preserved corneas, which is currently done subjectively. PMID:16372912

  9. Red Light-Green Light: A Classwide Management System for Students with Behavior Disorders in Primary Grades.

    ERIC Educational Resources Information Center

    Barbetta, Patricia M.

    1990-01-01

    Red Light-Green Light is a levels system providing immediate behavior modification feedback and varying privilege levels throughout the school day for primary students with behavior disorders. This article presents guidelines for implementation, covering development of classroom rules, classroom expectations, and system maintenance. Tips for…

  10. 14 CFR 27.1385 - Position light system installation.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ....1397. (b) Forward position lights. Forward position lights must consist of a red and a green light... rotorcraft in the normal flying position, the red light is on the left side and the green light is on the.... Each light cover or color filter must be at least flame resistant and may not change color or shape...

  11. 14 CFR 29.1385 - Position light system installation.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ....1397. (b) Forward position lights. Forward position lights must consist of a red and a green light... rotorcraft in the normal flying position, the red light is on the left side, and the green light is on the.... Each light cover or color filter must be at least flame resistant and may not change color or shape...

  12. Smart LED light source driver for machine vision system

    NASA Astrophysics Data System (ADS)

    Bürmen, Miran; Pernuš, Franjo; Likar, Boštjan

    2008-02-01

    The unique properties of LEDs offer significant advantages in terms of lifetime, intensity and color control, response time and efficiency, all of which are very important for illumination in machine vision applications. However, there are some drawbacks of LEDs, such as the high thermal dependency and temporal degradation of the intensity and color. Dealing with these drawbacks requires complex LED drivers, which are able to compensate for the abovementioned changes in the intensity and color, thereby maintaining higher stability over a wide range of ambient temperature throughout the lifetime of a LED light source. Moreover, state-of-the-art machine vision systems usually consist of a large number of independent LED light sources that enable real-time switching between different illumination setups at frequencies of up to 100 kHz. In this paper, we discuss the concepts of smart LED drivers with the emphasis on the flexibility and applicability. All the most important characteristics are being considered and discussed in detail: the accurate generation of high frequency waveforms, the efficiency of the current driver, thermal and temporal stabilization of the LED intensity and color, communication with a camera and personal computer or embedded system, and practicalities of implementing a large number of independent drive channels. Finally, a practical solution addressing all of the abovementioned issues is proposed with the aim of providing a flexible and highly stable smart LED light source driver for state-of-the-art machine vision systems.

  13. Using near infrared light for deep sea mining observation systems

    NASA Astrophysics Data System (ADS)

    Lu, Huimin; Li, Yujie; Li, Xin; Yang, Jianmin; Serikawa, Seiichi

    2015-10-01

    In this paper, we design a novel deep-sea near infrared light based imaging equipment for deep-sea mining observation systems. The spectral sensitivity peaks are in the red region of the invisible spectrum, ranging from 750nm to 900nm. In addition, we propose a novel underwater imaging model that compensates for the attenuation discrepancy along the propagation path. The proposed model fully considered the effects of absorption, scattering and refraction. We also develop a locally adaptive Laplacian filtering for enhancing underwater transmission map after underwater dark channel prior estimation. Furthermore, we propose a spectral characteristic-based color correction algorithm to recover the distorted color. In water tank experiments, we made a linear scale of eight turbidity steps ranging from clean to heavily scattered by adding deep sea soil to the seawater (from 500 to 2000 mg/L). We compared the results of different turbidity underwater scene, illuminated alternately with near infrared light vs. white light. Experiments demonstrate that the enhanced NIR images have a reasonable noise level after the illumination compensation in the dark regions and demonstrates an improved global contrast by which the finest details and edges are significantly enhanced. We also demonstrate that the effective distance of the designed imaging system is about 1.5 meters, which can meet the requirement of micro-terrain observation around the deep-sea mining systems. Remotely Operated Underwater Vehicle (ROV)-based experiments also certified the effectiveness of the proposed method.

  14. Development of flying spot illumination system for stage lighting

    NASA Astrophysics Data System (ADS)

    Asakawa, Hisashi; Ishii, Katsunori; Koshiro, Hikari; Baba, Junko; Wakaki, Moriaki

    2014-02-01

    The system to control the area of illumination is important for the luminaires used for stages and TV studios. Presently the methods to change the distance between a lamp and lenses, or to use a zooming projection of the aperture illuminated by the lamp are used to control the area. However, these methods require many optical components or mechanical components. Moreover, the energy of the light source is partially consumed by the absorption of the shutter on adjusting the illumination area. On the other hand, the control of the illuminance over the illuminated area is not possible by the methods. In this study, we developed the lighting system which enables to control both the illuminated area and the illuminance distribution within the area by scanning the beam from a LED array light source. The area of illumination was expanded along one dimension by scanning the LED beam using a rotating polygon mirror. The selection of the illuminated width and the control of the illuminance distribution were achieved by synchronizing the pulse width modulation (PWM) control of the LED with the rotation of the mirror using a time sharing control. As a result, various illuminance distributions can be realized at real time by using software control for the luminaire. The developed system has the merits of compact and high efficiency.

  15. System and Battery Charge Control for PV-Powered AC Lighting Systems

    SciTech Connect

    Kern, G.

    1999-04-01

    This report reviews a number of issues specific to stand-alone AC lighting systems. A review of AC lighting technology is presented, which discusses the advantages and disadvantages of various lamps. The best lamps for small lighting systems are compact fluorescent. The best lamps for intermediate-size systems are high- or low-pressure sodium. Specifications for battery charging and load control are provided with the goal of achieving lamp lifetimes on the order of 16,000 to 24,000 hours and battery lifetimes of 4 to 5 years. A rough estimate of the potential domestic and global markets for stand-alone AC lighting systems is presented. DC current injection tests were performed on high-pressure sodium lamps and the test results are presented. Finally, a prototype system was designed and a prototype system controller (with battery charger and DC/AC inverter) was developed and built.

  16. A Waste Heat Recovery System for Light Duty Diesel Engines

    SciTech Connect

    Briggs, Thomas E; Wagner, Robert M; Edwards, Kevin Dean; Curran, Scott; Nafziger, Eric J

    2010-01-01

    In order to achieve proposed fuel economy requirements, engines must make better use of the available fuel energy. Regardless of how efficient the engine is, there will still be a significant fraction of the fuel energy that is rejected in the exhaust and coolant streams. One viable technology for recovering this waste heat is an Organic Rankine Cycle. This cycle heats a working fluid using these heat streams and expands the fluid through a turbine to produce shaft power. The present work was the development of such a system applied to a light duty diesel engine. This lab demonstration was designed to maximize the peak brake thermal efficiency of the engine, and the combined system achieved an efficiency of 44.4%. The design of the system is discussed, as are the experimental performance results. The system potential at typical operating conditions was evaluated to determine the practicality of installing such a system in a vehicle.

  17. Integrated envelope and lighting systems for commercial buildings: a retrospective

    SciTech Connect

    Lee, Eleanor S.; Selkowitz, Stephen E.

    1998-06-01

    Daylighting systems in use world-wide rarely capture the energy-savings predicted by simulation tools and that we believe are achievable in real buildings. One of the primary reasons for this is that window and lighting systems are not designed and operated as an integrated system. Our efforts over the last five years have been targeted toward (1) development and testing of new prototype systems that involve a higher degree of systems integration than has been typical in the past, and (2) addressing current design and technological barriers that are often missed with component-oriented research. We summarize the results from this body of cross-disciplinary research and discuss its effects on the existing and future practice of daylighting in commercial buildings.

  18. Advanced light water reactor requirements document: Chapter 4, Reactor systems

    SciTech Connect

    Not Available

    1987-06-01

    The purpose of this chapter of the Advanced Light Water Reactor (ALWR) Plant Requirements Document is to establish utility requirements for the design of the Reactor Systems of Advanced LWR plants consistent with the objectives and principles of the ALWR program. The scope of this chapter covers the following for Pressurized Water Reactor (PWR) and Boiling Water Reactor (BWR): reactor pressure vessel, nozzles and safe-ends, reactor internals, in-vessel portions of fluid systems (including reactor internal pumps (Emergency Core Cooling System (ECCS) piping and spargers), nuclear fuel, and the control rods and control rod drive system (including hydraulic supply and accumulators). Special tools required for reactor system maintenance, inspection and testing are also covered.

  19. Autofocusing system for spatial light modulator-based maskless lithography.

    PubMed

    Schlangen, Sebastian; Ihme, Maximilian; Rahlves, Maik; Roth, Bernhard

    2016-03-10

    To produce diffractive or holographic structures in a photolithographic process, an optical projection system enabling structure resolution in the submicrometer range is highly desirable. To ensure that the optical focus of such a system lies on the substrate surface during the whole lithographic fabrication process, an autofocus system able to focus on a depth of field of a few hundred nanometers is usually required. In this work, we developed an autofocus system for spatial light modulator (SLM)-based maskless photolithographic applications. The system is capable of high-precision focusing without affecting the photoresist performance. It is based on contrast measurement combined with focus-pattern illumination to ensure high contrast at the substrate surface. In addition, we evaluated various autofocus algorithms with respect to time efficiency and accuracy to determine suitable focus-pattern and focus-algorithm combinations. PMID:26974774

  20. Carbon dynamics in peatland pool systems: the role of light

    NASA Astrophysics Data System (ADS)

    Pickard, Amy; Heal, Kate; McLeod, Andy; Dinsmore, Kerry

    2016-04-01

    Open-water pools are widespread in peatlands and are considered to represent biogeochemical hotspots within the peatland landscape. However the contribution of pool systems to wider peatland C cycling has not been quantified fully and there is a lack of knowledge of the role of photochemical processes in such environments. In this study, light exposure experiments were conducted in two contrasting pools to test the reactivity of aquatic C. The first study site was located at Cross Lochs (CL), Forsinard, in the Flow Country of Northern Scotland, in a 412 m2 pool characterised by low dissolved organic carbon (DOC) concentrations (˜15 mg C L-1). The second site was located at Red Moss of Balerno (RM), a raised bog in central Scotland, in a 48 m2 pool with high DOC concentrations (˜35 mg C L-1). Experiments took place over 9 days in situ at each pool in mid-summer 2015, with 500 mL water samples contained in bags transparent to sunlight and in opaque control bags. After field exposure, optical, chemical and stable C isotope analyses were conducted on the samples. Significant differences in biogeochemical cycling of DOC were detected between the two systems, with DOC losses as a percentage of the total C pool 15% higher at RM than at CL after light exposure. The mean DOC concentration of light exposed samples at RM declined steeply initially, with 83% observed DOC degradation occurring by day 3 of the experiment. Total losses of 7.9 mg DOC L-1were observed in light exposed samples at RM, along with decreasing E4:E6 ratios, suggesting that material remaining at the end of the experiment was humified. Depletion of DOC was positively correlated with production of CO2 at both sites, with concentrations of up to 4.3 mg CO2-C L-1 recorded at RM. Stable C isotope signatures at both sites were altered under light treatment, as demonstrated by the production of enriched δ13C-DOC (+0.46 ‰ relative to opaque bags) and depleted δ13C-DIC (-0.97 ‰ relative to opaque bags) at

  1. Carbon dynamics in peatland pool systems: the role of light

    NASA Astrophysics Data System (ADS)

    Pickard, Amy; Heal, Kate; McLeod, Andy; Dinsmore, Kerry

    2016-04-01

    Open-water pools are widespread in peatlands and are considered to represent biogeochemical hotspots within the peatland landscape. However the contribution of pool systems to wider peatland C cycling has not been quantified fully and there is a lack of knowledge of the role of photochemical processes in such environments. In this study, light exposure experiments were conducted in two contrasting pools to test the reactivity of aquatic C. The first study site was located at Cross Lochs (CL), Forsinard, in the Flow Country of Northern Scotland, in a 412 m2 pool characterised by low dissolved organic carbon (DOC) concentrations (˜15 mg C L‑1). The second site was located at Red Moss of Balerno (RM), a raised bog in central Scotland, in a 48 m2 pool with high DOC concentrations (˜35 mg C L‑1). Experiments took place over 9 days in situ at each pool in mid-summer 2015, with 500 mL water samples contained in bags transparent to sunlight and in opaque control bags. After field exposure, optical, chemical and stable C isotope analyses were conducted on the samples. Significant differences in biogeochemical cycling of DOC were detected between the two systems, with DOC losses as a percentage of the total C pool 15% higher at RM than at CL after light exposure. The mean DOC concentration of light exposed samples at RM declined steeply initially, with 83% observed DOC degradation occurring by day 3 of the experiment. Total losses of 7.9 mg DOC L‑1were observed in light exposed samples at RM, along with decreasing E4:E6 ratios, suggesting that material remaining at the end of the experiment was humified. Depletion of DOC was positively correlated with production of CO2 at both sites, with concentrations of up to 4.3 mg CO2-C L‑1 recorded at RM. Stable C isotope signatures at both sites were altered under light treatment, as demonstrated by the production of enriched δ13C-DOC (+0.46 ‰ relative to opaque bags) and depleted δ13C-DIC (-0.97 ‰ relative to opaque

  2. Visible Light Communication System Using an Organic Bulk Heterojunction Photodetector

    PubMed Central

    Arredondo, Belén; Romero, Beatriz; Pena, José Manuel Sánchez; Fernández-Pacheco, Agustín; Alonso, Eduardo; Vergaz, Ricardo; de Dios, Cristina

    2013-01-01

    A visible light communication (VLC) system using an organic bulk heterojunction photodetector (OPD) is presented. The system has been successfully proven indoors with an audio signal. The emitter consists of three commercial high-power white LEDs connected in parallel. The receiver is based on an organic photodetector having as active layer a blend of poly(3-hexylthiophene) (P3HT) and phenyl C61-butyric acid methyl ester (PCBM). The OPD is opto-electrically characterized, showing a responsivity of 0.18 A/W and a modulation response of 790 kHz at −6 V. PMID:24036584

  3. 4D Light Field Imaging System Using Programmable Aperture

    NASA Technical Reports Server (NTRS)

    Bae, Youngsam

    2012-01-01

    Complete depth information can be extracted from analyzing all angles of light rays emanated from a source. However, this angular information is lost in a typical 2D imaging system. In order to record this information, a standard stereo imaging system uses two cameras to obtain information from two view angles. Sometimes, more cameras are used to obtain information from more angles. However, a 4D light field imaging technique can achieve this multiple-camera effect through a single-lens camera. Two methods are available for this: one using a microlens array, and the other using a moving aperture. The moving-aperture method can obtain more complete stereo information. The existing literature suggests a modified liquid crystal panel [LC (liquid crystal) panel, similar to ones commonly used in the display industry] to achieve a moving aperture. However, LC panels cannot withstand harsh environments and are not qualified for spaceflight. In this regard, different hardware is proposed for the moving aperture. A digital micromirror device (DMD) will replace the liquid crystal. This will be qualified for harsh environments for the 4D light field imaging. This will enable an imager to record near-complete stereo information. The approach to building a proof-ofconcept is using existing, or slightly modified, off-the-shelf components. An SLR (single-lens reflex) lens system, which typically has a large aperture for fast imaging, will be modified. The lens system will be arranged so that DMD can be integrated. The shape of aperture will be programmed for single-viewpoint imaging, multiple-viewpoint imaging, and coded aperture imaging. The novelty lies in using a DMD instead of a LC panel to move the apertures for 4D light field imaging. The DMD uses reflecting mirrors, so any light transmission lost (which would be expected from the LC panel) will be minimal. Also, the MEMS-based DMD can withstand higher temperature and pressure fluctuation than a LC panel can. Robotics need

  4. Light microscopy applications in systems biology: opportunities and challenges

    PubMed Central

    2013-01-01

    Biological systems present multiple scales of complexity, ranging from molecules to entire populations. Light microscopy is one of the least invasive techniques used to access information from various biological scales in living cells. The combination of molecular biology and imaging provides a bottom-up tool for direct insight into how molecular processes work on a cellular scale. However, imaging can also be used as a top-down approach to study the behavior of a system without detailed prior knowledge about its underlying molecular mechanisms. In this review, we highlight the recent developments on microscopy-based systems analyses and discuss the complementary opportunities and different challenges with high-content screening and high-throughput imaging. Furthermore, we provide a comprehensive overview of the available platforms that can be used for image analysis, which enable community-driven efforts in the development of image-based systems biology. PMID:23578051

  5. Super-resolution for scanning light stimulation systems

    NASA Astrophysics Data System (ADS)

    Bitzer, L. A.; Neumann, K.; Benson, N.; Schmechel, R.

    2016-09-01

    Super-resolution (SR) is a technique used in digital image processing to overcome the resolution limitation of imaging systems. In this process, a single high resolution image is reconstructed from multiple low resolution images. SR is commonly used for CCD and CMOS (Complementary Metal-Oxide-Semiconductor) sensor images, as well as for medical applications, e.g., magnetic resonance imaging. Here, we demonstrate that super-resolution can be applied with scanning light stimulation (LS) systems, which are common to obtain space-resolved electro-optical parameters of a sample. For our purposes, the Projection Onto Convex Sets (POCS) was chosen and modified to suit the needs of LS systems. To demonstrate the SR adaption, an Optical Beam Induced Current (OBIC) LS system was used. The POCS algorithm was optimized by means of OBIC short circuit current measurements on a multicrystalline solar cell, resulting in a mean square error reduction of up to 61% and improved image quality.

  6. Light intensity matching between different intravascular optical coherence tomography systems

    NASA Astrophysics Data System (ADS)

    Liu, Shengnan; Eggermont, Jeroen; Nakatani, Shimpei; Lelieveldt, Boudewijn P. F.; Dijkstra, Jouke

    2016-02-01

    Currently two commercial intravascular optical coherence tomography (IVOCT) systems are available: Illumien Optis from St. Jude Medical (SJM) and Lunawave from Terumo. Both systems store the light intensity data in a raw vendor specific polar format. However, whereas SJM uses 16-bits per pixel Terumo uses 8-bits meaning the intensity values are in different ranges. This complicates quantitative light intensity based analysis when comparing results based on data from both systems. Therefore, this work aims to find an intensity transformation function from Terumo's 8-bit OFDI data to SJM's 16-bit range. The data consists of 8 pullbacks, 4 acquired with each system in the same arteries of 2 different patents pre- and post-stenting implantation. A total of 133 matching sections without stent struts from the two sets of pullbacks were identified based on landmarks such as side-branches and calcified regions. Since the main region of interest in the image is the tissue region only the pixels within 2mm behind the lumen border are used. In order to match the SJM data range, the Terumo data was rescaled and cumulative distribution functions (CDF) were calculated based on the histogram distributions. Comparing these CDFs, the transformation function can be determined. Application of this transformation function not only improves the visual similarity of matching slices it can also be used for further quantitative analysis.

  7. Bringing light into the dark triplet space of molecular systems.

    PubMed

    Ge, Jing; Zhang, Qun; Jiang, Jun; Geng, Zhigang; Jiang, Shenlong; Fan, Kaili; Guo, Zhenkun; Hu, Jiahua; Chen, Zongwei; Chen, Yang; Wang, Xiaoping; Luo, Yi

    2015-05-21

    A molecule or a molecular system always consists of excited states of different spin multiplicities. With conventional optical excitations, only the (bright) states with the same spin multiplicity of the ground state could be directly reached. How to reveal the dynamics of excited (dark) states remains the grand challenge in the topical fields of photochemistry, photophysics, and photobiology. For a singlet-triplet coupled molecular system, the (bright) singlet dynamics can be routinely examined by conventional femtosecond pump-probe spectroscopy. However, owing to the involvement of intrinsically fast decay channels such as intramolecular vibrational redistribution and internal conversion, it is very difficult, if not impossible, to single out the (dark) triplet dynamics. Herein, we develop a novel strategy that uses an ultrafast broadband white-light continuum as a excitation light source to enhance the probability of intersystem crossing, thus facilitating the population flow from the singlet space to the triplet space. With a set of femtosecond time-reversed pump-probe experiments, we report on a proof-of-concept molecular system (i.e., the malachite green molecule) that the pure triplet dynamics can be mapped out in real time through monitoring the modulated emission that occurs solely in the triplet space. Significant differences in excited-state dynamics between the singlet and triplet spaces have been observed. This newly developed approach may provide a useful tool for examining the elusive dark-state dynamics of molecular systems and also for exploring the mechanisms underlying molecular luminescence/photonics and solar light harvesting.

  8. An auto-focusing system for white light microscopic measurement

    NASA Astrophysics Data System (ADS)

    Chang, Ming; Deka, Juti Rani; Chen, Pei Jung; Chen, Yu Kuan; Cui, Changcai

    2008-12-01

    With the rapid development of semiconductor technology the demand for high resolution measuring system is evolving at an ever-increasing pace. Microscope was initially used to detect the defect by connecting charge couple device (CCD) as an auxiliary device. In general, for microscopic measurement human eyes are used to focus on the sample. The adjustment depends on the operator's astute measurement ability, which affected the repeatability and accuracy of the readings. There is a need of high-speed microscope auto focusing system for industrial applications. The present investigation describes about the development of an autofocus system to carry out microscopic measurement more precisely and accurately with less time. The measurement system consists of a light source, two beam splitters, a movable sample stage and a Mirau's interferometer, a photo-detector and 8051 microcontroller (MCU89C51). The light reflected from the sample surface interferes with the light reflected from the reference and produce an interference pattern, which is imaged onto a CCD array. In the setup developed for the autofocus one extra beam splitter is placed in the path of interfered beam to the CCD. The beam splitter is placed at equal distances from the CCD and the photodetector. The focus position is determined from the voltage developed in the photo-detector due to the movement of sample stage of the microscope. The maximum voltage that obtained at the focus position is confirmed with the CCD image. Microcontroller is used to stop the controller at the focus position immediately once the sample stage reaches it. Software is developed to locate the maximum intensity position. The design may autofocus the interferometer within 4mm distance in 1 second. The auto-focusing not only provides enhanced repeatability and accuracy of the results at a faster rate but also minimizes operator involvement.

  9. Preliminary assessment report for Army Aviation Support Facility No. 3, Installation 13307, Hunter Army Airfield, Savannah, Georgia. Installation Restoration Program

    SciTech Connect

    Kolpa, R.; Smith, K.

    1993-07-01

    This report presents the results of the preliminary assessment (PA) conducted by Argonne National Laboratory at the Georgia Army National Guard property located on Hunter Army Airfield (HAA) near Savannah, Georgia, known as Army Aviation Support Facility (AASF) No. 3. Preliminary assessments of federal facilities are being conducted to compile the information necessary for completing preremedial activities and to provide a basis for establishing corrective actions in response to releases of hazardous substances. The principal objective of the PA is to characterize the site accurately and determine the need for further action by examining site activities, types and quantities of hazardous substances utilized, the nature and amounts of wastes generated or stored at the facility, and potential pathways by which contamination could affect public health and the environment. This PA satisfies, for the AASF No. 3 property, requirements of the Department of Defense Installation Restoration Program (IRP). The scope of this assessment is limited to the facilities and past activities contained within the area now occupied by AASF No. 3. However, this assessment report is intended to be read in conjunction with a previous IRP assessment of HAA completed in 1992 (USATHAMA 1992) and to provide comprehensive information on AASF No. 3 for incorporation with information contained in that previous assessment for the entirety of HAA.

  10. Mobile health-monitoring system through visible light communication.

    PubMed

    Tan, Yee-Yong; Chung, Wan-Young

    2014-01-01

    Promising development in the light emitting diode (LED) technology has spurred the interest to adapt LED for both illumination and data transmission. This has fostered the growth of interest in visible light communication (VLC), with on-going research to utilize VLC in various applications. This paper presents a mobile-health monitoring system, where healthcare information such as biomedical signals and patient information are transmitted via the LED lighting. A small and portable receiver module is designed and developed to be attached to the mobile device, providing a seamless monitoring environment. Three different healthcare information including ECG, PPG signals and HL7 text information is transmitted simultaneously, using a single channel VLC. This allows for a more precise and accurate monitoring and diagnosis. The data packet size is carefully designed, to transmit information in a minimal packet error rate. A comprehensive monitoring application is designed and developed through the use of a tablet computer in our study. Monitoring and evaluation such as heart rate and arterial blood pressure measurement can be performed concurrently. Real-time monitoring is demonstrated through experiment, where non-hazardous transmission method can be implemented alongside a portable device for better and safer healthcare service.

  11. Impact assessment and performance targets for lighting and envelope systems

    SciTech Connect

    Sullivan, R.; Lee, E.S.; Selkowitz, S.

    1992-06-01

    Electric lighting loads and cooling from solar heat gains and from lights are the two largest components of peak demand in commercial buildings. The most cost effective demand side management solutions are generally those that directly reduce or eliminate these loads. Existing technologies can provide modest reductions, however they are typically applied an a piecemeal manner that yields less than optimal results. The full potential of existing technologies will be realized when they are commercially available in an integrated package easily specifiable by architects and engineers. Emerging technologies can also be developed to provide even greater savings and extend the savings over a greater portion of the building floor area. This report assesses achievable energy and peak demand performance in California commercial buildings with technologies available today and in the future. We characterize energy performance over a large range of building envelope and lighting conditions, both through computer simulation models and through case study measured data, and subsequently determine reasonable energy targets if building design were further optimized with integrated systems of current or new technologies. Energy targets are derived from the study after consideration of industry priorities, design constraints, market forces, energy code influence, and the state of current building stock.

  12. Distributed proximity sensor system having embedded light emitters and detectors

    NASA Technical Reports Server (NTRS)

    Lee, Sukhan (Inventor)

    1990-01-01

    A distributed proximity sensor system is provided with multiple photosensitive devices and light emitters embedded on the surface of a robot hand or other moving member in a geometric pattern. By distributing sensors and emitters capable of detecting distances and angles to points on the surface of an object from known points in the geometric pattern, information is obtained for achieving noncontacting shape and distance perception, i.e., for automatic determination of the object's shape, direction and distance, as well as the orientation of the object relative to the robot hand or other moving member.

  13. Optical laser systems at the Linac Coherent Light Source

    DOE PAGES

    Minitti, Michael P.; Robinson, Joseph S.; Coffee, Ryan N.; Edstrom, Steve; Gilevich, Sasha; Glownia, James M.; Granados, Eduardo; Hering, Philippe; Hoffmann, Matthias C.; Miahnahri, Alan; et al

    2015-04-22

    Ultrafast optical lasers play an essential role in exploiting the unique capabilities of recently commissioned X-ray free-electron laser facilities such as the Linac Coherent Light Source (LCLS). Pump–probe experimental techniques reveal ultrafast dynamics in atomic and molecular processes and reveal new insights in chemistry, biology, material science and high-energy-density physics. This manuscript describes the laser systems and experimental methods that enable cutting-edge optical laser/X-ray pump–probe experiments to be performed at LCLS.

  14. Optical laser systems at the Linac Coherent Light Source

    PubMed Central

    Minitti, Michael P.; Robinson, Joseph S.; Coffee, Ryan N.; Edstrom, Steve; Gilevich, Sasha; Glownia, James M.; Granados, Eduardo; Hering, Philippe; Hoffmann, Matthias C.; Miahnahri, Alan; Milathianaki, Despina; Polzin, Wayne; Ratner, Daniel; Tavella, Franz; Vetter, Sharon; Welch, Marc; White, William E.; Fry, Alan R.

    2015-01-01

    Ultrafast optical lasers play an essential role in exploiting the unique capabilities of recently commissioned X-ray free-electron laser facilities such as the Linac Coherent Light Source (LCLS). Pump–probe experimental techniques reveal ultrafast dynamics in atomic and molecular processes and reveal new insights in chemistry, biology, material science and high-energy-density physics. This manuscript describes the laser systems and experimental methods that enable cutting-edge optical laser/X-ray pump–probe experiments to be performed at LCLS. PMID:25931064

  15. Study of heating capacity of focused IR light soldering systems.

    PubMed

    Anguiano, C; Félix, M; Medel, A; Bravo, M; Salazar, D; Márquez, H

    2013-10-01

    An experimental study about four optical setups used for developing a Focused IR Light Soldering System (FILSS) for Surface Mount Technology (SMT) lead-free electronic devices specifically for Ball Grid Arrays (BGA) is presented. An analysis of irradiance and infrared thermography at BGA surface is presented, as well as heat transfer by radiation and conduction process from the surface of the BGA to the solder balls. The results of this work show that the heating provided by our proposed optical setups, measured at the BGA under soldering process, meets the high temperature and uniform thermal distribution requirements, which are defined by the reflow solder method for SMT devices. PMID:24104296

  16. Optical laser systems at the Linac Coherent Light Source.

    PubMed

    Minitti, Michael P; Robinson, Joseph S; Coffee, Ryan N; Edstrom, Steve; Gilevich, Sasha; Glownia, James M; Granados, Eduardo; Hering, Philippe; Hoffmann, Matthias C; Miahnahri, Alan; Milathianaki, Despina; Polzin, Wayne; Ratner, Daniel; Tavella, Franz; Vetter, Sharon; Welch, Marc; White, William E; Fry, Alan R

    2015-05-01

    Ultrafast optical lasers play an essential role in exploiting the unique capabilities of recently commissioned X-ray free-electron laser facilities such as the Linac Coherent Light Source (LCLS). Pump-probe experimental techniques reveal ultrafast dynamics in atomic and molecular processes and reveal new insights in chemistry, biology, material science and high-energy-density physics. This manuscript describes the laser systems and experimental methods that enable cutting-edge optical laser/X-ray pump-probe experiments to be performed at LCLS.

  17. Performance study for indoor visible light communication systems

    NASA Astrophysics Data System (ADS)

    Gao, Shuo

    The field of Optical Wireless Communications (OWC) has seen rapid development during the recent years. This growing popularity is due to several characteristics of considerable importance to consumer electronics products, such as large bandwidth that is also not having spectrum regulations imposed, low cost, and license free operation. As a branch of OWC, visible light communication (VLC) systems have their own unique advantages, with several new technologies, products and patents having been developed during since the end of last century. In this research, a VLC system for indoor application is proposed. In this work, we focus on reducing cost, and for that, we had to make appropriate selection of system's components, e.g. modulation, coding, filtering. Our objective was to achieve acceptable bit error rate (BER) performance for indoor use, with a low cost system. Through our research we met this objective. Our designs were evaluated through computer simulations. The acquired results proved the suitability of the proposed schemes and the performance's degree of dependency on several parameters such as distance, incidence angle and irradiance angle. A software tool was created allowing easy assessment of the communication system. It is using a user friendly GUI through which the user enters the system's parameters and the system outputs the corresponding BER value.

  18. [Hygienic aspects of the use of light-emitting diode sources in the communal artificial lighting systems].

    PubMed

    Kuchma, V R; Teksheva, L M; Nadezhdin, D S; Zvezdina, I V

    2011-01-01

    To estimate the possibilities of using light-emitting diode energy-saving lighting in the residential and public houses, industrial buildings and structures is one of society's most important tasks. The concept of these researches was to study comparative psychophysiological and functional changes in the volunteers working under general lighting generated by light-emitting diodes and luminescent lamps. The results of the study permit one to recommend the use of light-emitting diodes in general lighting systems in the rooms wherein visual and mental load work is done, i.e. in the industrial, office, and public buildings intended for adult users for different purposes, as well as in rail transport objects.

  19. TITLE III EVALUATION REPORT FOR THE SUBSURFACE LIGHTING SYSTEM

    SciTech Connect

    L.J. Fernandez

    1998-09-09

    The objective of this evaluation is to provide recommendations to ensure consistency between the technical baseline requirements, baseline design, and the as-constructed Subsurface Lighting System. Recommendations for resolving discrepancies between the as-constructed system, and the technical baseline requirements are included in this report. Cost and Schedule estimates are provided for all recommended modifications. This report does not address items which do not meet current safety or code requirements. These items are identified to the CMO and immediate action is taken to correct the situation. The report does identify safety and code items for which the A/E is recommending improvements. The recommended improvements will exceed the minimum requirements of applicable code and safety guide lines. These recommendations are intended to improve and enhance the operation and maintenance of the facility.

  20. Use of sunlight for plant lighting in a bioregenerative life support system Equivalent system mass calculations

    NASA Astrophysics Data System (ADS)

    Drysdale, Alan; Nakamura, Takashi; Yorio, Neil; Sager, John; Wheeler, Ray

    2008-12-01

    Plant lighting is a critical issue for cost effectiveness of bioregenerative systems. A plant lighting system using sunlight has been investigated and compared to systems using electrical lighting. Co-generation of electricity and use of in situ resource utilization (ISRU) were also considered. The fixed part of equivalent system mass was found to be reduced by factors of from 3.1 to 3.9, according to the mission assumptions. The time-dependent part of equivalent system mass was reduced by a smaller value, of about 1.05. Cost effectiveness of bioregeneration has been compared to the cost of shipping food. Break-even times for different Lunar and Mars missions were generally in the order of 2-10 years, and were quite sensitive to the assumptions. There is significant scope for future refinement of these values, and work is ongoing.

  1. 46 CFR 78.17-45 - Emergency lighting and power systems.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 3 2014-10-01 2014-10-01 false Emergency lighting and power systems. 78.17-45 Section... OPERATIONS Tests, Drills, and Inspections § 78.17-45 Emergency lighting and power systems. (a) It shall be the duty of the master to see that the emergency lighting and power systems are operated and...

  2. 46 CFR 78.17-45 - Emergency lighting and power systems.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 3 2012-10-01 2012-10-01 false Emergency lighting and power systems. 78.17-45 Section... OPERATIONS Tests, Drills, and Inspections § 78.17-45 Emergency lighting and power systems. (a) It shall be the duty of the master to see that the emergency lighting and power systems are operated and...

  3. 46 CFR 78.17-45 - Emergency lighting and power systems.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Emergency lighting and power systems. 78.17-45 Section... OPERATIONS Tests, Drills, and Inspections § 78.17-45 Emergency lighting and power systems. (a) It shall be the duty of the master to see that the emergency lighting and power systems are operated and...

  4. 46 CFR 78.17-45 - Emergency lighting and power systems.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 3 2013-10-01 2013-10-01 false Emergency lighting and power systems. 78.17-45 Section... OPERATIONS Tests, Drills, and Inspections § 78.17-45 Emergency lighting and power systems. (a) It shall be the duty of the master to see that the emergency lighting and power systems are operated and...

  5. 46 CFR 78.17-45 - Emergency lighting and power systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 3 2011-10-01 2011-10-01 false Emergency lighting and power systems. 78.17-45 Section... OPERATIONS Tests, Drills, and Inspections § 78.17-45 Emergency lighting and power systems. (a) It shall be the duty of the master to see that the emergency lighting and power systems are operated and...

  6. 78 FR 41810 - Proposed Revisions to Light Load Handling System and Operations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-11

    ... COMMISSION Proposed Revisions to Light Load Handling System and Operations AGENCY: Nuclear Regulatory..., ``Light Load Handling System and Operations'' of NUREG-0800, ``Standard Review Plan for the Review of...) with respect to the light load handling system and related refueling operations. The draft SRP...

  7. Precise Selenodetic Coordinate System on Artificial Light Refers

    NASA Astrophysics Data System (ADS)

    Bagrov, Alexander; Pichkhadze, Konstantin M.; Sysoev, Valentin

    Historically a coordinate system for the Moon was established on the base of telescopic observations from the Earth. As the angular resolution of Earth-to-Space telescopic observations is limited by Earth atmosphere, and is ordinary worse then 1 ang. second, the mean accuracy of selenodetic coordinates is some angular minutes, which corresponds to errors about 900 meters for positions of lunar objects near center of visible lunar disk, and at least twice more when objects are near lunar poles. As there are no Global Positioning System nor any astronomical observation instruments on the Moon, we proposed to use an autonomous light beacon on the Luna-Globe landing module to fix its position on the surface of the moon ant to use it as refer point for fixation of spherical coordinates system for the Moon. The light beacon is designed to be surely visible by orbiting probe TV-camera. As any space probe has its own stars-orientation system, there is not a problem to calculate a set of directions to the beacon and to the referent stars in probe-centered coordinate system during flight over the beacon. Large number of measured angular positions and time of each observation will be enough to calculate both orbital parameters of the probe and selenodetic coordinates of the beacon by methods of geodesy. All this will allow fixing angular coordinates of any feature of lunar surface in one global coordinate system, referred to the beacon. The satellite’s orbit plane contains ever the center mass of main body, so if the beacon will be placed closely to a lunar pole, we shall determine pole point position of the Moon with accuracy tens times better then it is known now. When angular accuracy of self-orientation by stars of the orbital module of Luna-Glob mission will be 6 angular seconds, then being in circular orbit with height of 200 km the on-board TV-camera will allow calculation of the beacon position as well as 6" corresponding to spatial resolution of the camera. It mean

  8. Modeling coherent excitation energy transfer in photosynthetic light harvesting systems

    NASA Astrophysics Data System (ADS)

    Huo, Pengfei

    2011-12-01

    Recent non-linear spectroscopy experiments suggest the excitation energy transfer in some biological light harvesting systems initially occurs coherently. Treating such processes brings significant challenge for conventional theoretical tools that usually involve different approximations. In this dissertation, the recently developed Iterative Linearized Density Matrix (ILDM) propagation scheme, which is non-perturbative and non-Markovian is extended to study coherent excitation energy transfer in various light harvesting complexes. It is demonstrated that the ILDM approach can successfully describe the coherent beating of the site populations on model systems and gives quantitative agreement with both experimental results and the results of other theoretical methods have been developed recently to going beyond the usual approximations, thus providing a new reliable theoretical tool to study this phenomenon. This approach is used to investigate the excited energy transfer dynamics in various experimentally studied bacteria light harvesting complexes, such as Fenna-Matthews-Olsen (FMO) complex, Phycocyanin 645 (PC645). In these model calculations, quantitative agreement is found between computed de-coherence times and quantum beating pattens observed in the non-linear spectroscopy. As a result of these studies, it is concluded that the stochastic resonance behavior is important in determining the optimal throughput. To begin addressing possible mechanics for observed long de-coherence time, various models which include correlation between site energy fluctuations as well as correlation between site energy and inter-site coupling are developed. The influence of both types of correlation on the coherence and transfer rate is explored using with a two state system-bath hamiltonian parametrized to model the reaction center of Rhodobacter sphaeroides bacteria. To overcome the disadvantages of a fully reduced approach or a full propagation method, a brownian dynamics

  9. Modeling of lighting behaviour of a hybrid lighting system in inner spaces of Building of Electrical Engineering

    NASA Astrophysics Data System (ADS)

    Amado, L.; Osma, G.; Villamizar, R.

    2016-07-01

    This paper presents the modelling of lighting behaviour of a hybrid lighting system - HLS in inner spaces for tropical climate. HLS aims to mitigate the problem of high electricity consumption used by artificial lighting in buildings. These systems integrate intelligently the daylight and artificial light through control strategies. However, selection of these strategies usually depends on expertise of designer and of available budget. In order to improve the selection process of the control strategies, this paper analyses the Electrical Engineering Building (EEB) case, initially modelling of lighting behaviour is established for the HLS of a classroom and an office. This allows estimating the illuminance level of the mixed lighting in the space, and energy consumption by artificial light according to different lighting control techniques, a control strategy based on occupancy and a combination of them. The model considers the concept of Daylight Factor (DF) for the estimating of daylight illuminance on the work plane for tropical climatic conditions. The validation of the model was carried out by comparing the measured and model-estimated indoor illuminances.

  10. Evaluation of an alternative traffic light change anticipation system.

    PubMed

    Newton, C; Mussa, R N; Sadalla, E K; Burns, E K; Matthias, J

    1997-03-01

    A driving simulator was used to study the efficacy of an alternative signal phasing program. The new Traffic Light Change Anticipation System (TLCAS) utilizes a flashing amber in conjunction with a solid green indication to warn drivers of the impending onset of the solid amber indication. This new program was expected to provide drivers with additional information with which to make safe stopping or crossing decisions, and reduce behaviour associated with increased accident rates at signalized intersections. Additionally, a new measure of first response variability was introduced to evaluate the effect of the new program on driver behavior. The results indicated that the new system has the ability to reduce the number of red light violations. Of the 1148 target intersections, 43 violations were recorded for the regular program compared to 9 for the TLCAS program. The severity of decelerations was also impacted. The regular program displayed average maximum decelerations of 3.1 m/sec2 compared to 2.5 m/sec2 for the TLCAS program. However, the TLCAS program showed an increased variability in first response five times larger than the regular program. This finding, in conjunction with traditional measures, indicates that the new system performs comparably to an increased amber duration by increasing the potential for conflicting decisions between successive drivers approaching an intersection. Altogether, the results suggest that this alternative signal phasing program would not improve intersection safety. The findings also suggest that further study of the longitudinal behavior after the introduction of a TLCAS program may be warranted. Specifically, future studies should examine whether subjects engage in appropriate adaptive changes when confronted with a solid amber period warning after becoming familiar with the TLCAS.

  11. Fly-by-Light Advanced Systems Hardware (FLASH) program

    NASA Astrophysics Data System (ADS)

    Bedoya, Carlos A.

    1995-05-01

    Fiber optics are immune to electromagnetic emissions and have the potential to eliminate this concern especially in flight critical applications if they can be developed to the same level of technology as current systems using wire to carry the signals. As aircraft become more and more dependent of digital signals to control all systems, the Electromagnetic Environment (EME) will become more and more a concern for the safe long term operation. The International Severe HIRF electromagnetic environment (EME) is less than 2000 Volts per meter below 400 MHz and reaches a maximum of 6,850 Volts per meter in the 4-6 GHz range. The normal assumption is that a metal or composite aircraft skin with appropriate seals provides 20 dB attenuation of the external environment. This reduces peak levels at the avionics boxes to less than 200 Volts per meter below 400 MHz and a maximum of 685 Volts per meter in the 406 GHz range. MIL-STD-461D imposed an additional box level requirement to 200 Volts per meter from 10 KHz to 40 GHz. This requirement equals or surpasses the attenuated HIRF environment over significant portions of the spectrum and implies that the aircraft must be designed to achieve and maintain this value throughout its service life. Although wires can be shielded and designed to achieve these requirements, it is a more expensive process, adds the weight of shielding and requires maintenance of the shielding integrity at all times. The very light weight and high bandwidth of fiber optics also offer the potential of eliminating the number of connections and weight savings in aircraft. For example on a one to one replacement of wire by fiber, it is estimated that fiber would weight about 1/20 the weight of wire. Current wire buses used for duplex communications in aircraft applications have a bandwidth of about 1 MHz while equivalent buses using fiber optics have a bandwidth of 20 MHz. For other applications such as video and avionics interfaces, fiber buses in the

  12. Structured Light-Based 3D Reconstruction System for Plants.

    PubMed

    Nguyen, Thuy Tuong; Slaughter, David C; Max, Nelson; Maloof, Julin N; Sinha, Neelima

    2015-07-29

    Camera-based 3D reconstruction of physical objects is one of the most popular computer vision trends in recent years. Many systems have been built to model different real-world subjects, but there is lack of a completely robust system for plants. This paper presents a full 3D reconstruction system that incorporates both hardware structures (including the proposed structured light system to enhance textures on object surfaces) and software algorithms (including the proposed 3D point cloud registration and plant feature measurement). This paper demonstrates the ability to produce 3D models of whole plants created from multiple pairs of stereo images taken at different viewing angles, without the need to destructively cut away any parts of a plant. The ability to accurately predict phenotyping features, such as the number of leaves, plant height, leaf size and internode distances, is also demonstrated. Experimental results show that, for plants having a range of leaf sizes and a distance between leaves appropriate for the hardware design, the algorithms successfully predict phenotyping features in the target crops, with a recall of 0.97 and a precision of 0.89 for leaf detection and less than a 13-mm error for plant size, leaf size and internode distance.

  13. A Structured Light Sensor System for Tree Inventory

    NASA Technical Reports Server (NTRS)

    Chien, Chiun-Hong; Zemek, Michael C.

    2000-01-01

    Tree Inventory is referred to measurement and estimation of marketable wood volume in a piece of land or forest for purposes such as investment or for loan applications. Exist techniques rely on trained surveyor conducting measurements manually using simple optical or mechanical devices, and hence are time consuming subjective and error prone. The advance of computer vision techniques makes it possible to conduct automatic measurements that are more efficient, objective and reliable. This paper describes 3D measurements of tree diameters using a uniquely designed ensemble of two line laser emitters rigidly mounted on a video camera. The proposed laser camera system relies on a fixed distance between two parallel laser planes and projections of laser lines to calculate tree diameters. Performance of the laser camera system is further enhanced by fusion of information induced from structured lighting and that contained in video images. Comparison will be made between the laser camera sensor system and a stereo vision system previously developed for measurements of tree diameters.

  14. Structured Light-Based 3D Reconstruction System for Plants

    PubMed Central

    Nguyen, Thuy Tuong; Slaughter, David C.; Max, Nelson; Maloof, Julin N.; Sinha, Neelima

    2015-01-01

    Camera-based 3D reconstruction of physical objects is one of the most popular computer vision trends in recent years. Many systems have been built to model different real-world subjects, but there is lack of a completely robust system for plants.This paper presents a full 3D reconstruction system that incorporates both hardware structures (including the proposed structured light system to enhance textures on object surfaces) and software algorithms (including the proposed 3D point cloud registration and plant feature measurement). This paper demonstrates the ability to produce 3D models of whole plants created from multiple pairs of stereo images taken at different viewing angles, without the need to destructively cut away any parts of a plant. The ability to accurately predict phenotyping features, such as the number of leaves, plant height, leaf size and internode distances, is also demonstrated. Experimental results show that, for plants having a range of leaf sizes and a distance between leaves appropriate for the hardware design, the algorithms successfully predict phenotyping features in the target crops, with a recall of 0.97 and a precision of 0.89 for leaf detection and less than a 13-mm error for plant size, leaf size and internode distance. PMID:26230701

  15. Design and implementation of high power LED machine vision lighting system

    NASA Astrophysics Data System (ADS)

    Xiao, Hua-peng; Li, Ming-dong; Gao, Xing-yu; Chen, Peng-bo

    2014-11-01

    The machine vision system has already become the optical mechanical electrical integration products or components of products in modern equipment manufacturing industry. The new LED is more excellent than the halogen tungsten lamp, laser and other traditional light source. It is used in machine vision system more and more. From the analysis of the functional characteristics, this article pointed out the difference between machine vision LED lighting system and traditional optical instrument lighting system. By the interactive methods which integrate with synthesis design analysis and Simulation, this paper import the element of field flattening theory into traditional lighting design, making it a kind of the new flat field lighting system. The effect when it was applied to high power LED lighting system is good. With the new design concept, through the interactive design method and the new image quality evaluation system, we have a contrast experiment on a kind of LED single lamp lighting system. The results show that the field flat lighting system is superior to the traditional one. The most distinctive feature of the new light system is that, it can improve the performance of critical illumination system in certain procedures -- poor illumination uniformity performance. This new lighting optical structure and the new lighting quality evaluation system have broad prospects.

  16. Characterization of hybrid lighting systems of the Electrical Engineering Building in the Industrial University of Santander

    NASA Astrophysics Data System (ADS)

    Galvis, D.; Exposito, C.; Osma, G.; Amado, L.; Ordóñez, G.

    2016-07-01

    This paper presents an analysis of hybrid lighting systems of Electrical Engineering Building in the Industrial University of Santander, which is a pilot of green building for warm- tropical conditions. Analysis of lighting performance of inner spaces is based on lighting curves obtained from characterization of daylighting systems of these spaces. A computation tool was made in Excel-Visual Basic to simulate the behaviour of artificial lighting system considering artificial control system, user behaviour and solar condition. Also, this tool allows to estimate the electrical energy consumption of the lighting system for a day, a month and a year.

  17. Ranging system which compares an object reflected component of a light beam to a reference component of the light beam

    NASA Technical Reports Server (NTRS)

    Mclauchlan, J. M.; Auyeung, J.; Tubbs, E. F.; Goss, W. C.; Psaltis, D. (Inventor)

    1985-01-01

    A system is described for measuring the distance to an object by comparing a first component of a light pulse that is reflected off the object with a second component of the light pulse that passes along a reference path of known length, which provides great accuracy with a relatively simple and rugged design. The reference path can be changed in precise steps so that it has an equivalent length approximately equal to the path length of the light pulse component that is reflected from the object. The resulting small difference in path lengths can be precisely determined by directing the light pulse components into opposite ends of a detector formed of a material that emits a second harmonic light output at the locations where the opposite going pulses past simultaneously across one another.

  18. Lighting

    SciTech Connect

    Audin, L.

    1994-12-31

    EPAct covers a vast territory beyond lighting and, like all legislation, also contains numerous {open_quotes}favors,{close_quotes} compromises, and even some sleight-of-hand. Tucked away under Title XIX, for example, is an increase from 20% to 28% tax on gambling winnings, effective January 1, 1993 - apparently as a way to help pay for new spending listed elsewhere in the bill. Overall, it is a landmark piece of legislation, about a decade overdue. It remains to be seen how the Federal Government will enforce upgrading of state (or even their own) energy codes. There is no mention of funding for {open_quotes}energy police{close_quotes} in EPAct. Merely creating such a national standard, however, provides a target for those who sincerely wish to create an energy-efficient future.

  19. An Efficient 3D Imaging using Structured Light Systems

    NASA Astrophysics Data System (ADS)

    Lee, Deokwoo

    Structured light 3D surface imaging has been crucial in the fields of image processing and computer vision, particularly in reconstruction, recognition and others. In this dissertation, we propose the approaches to development of an efficient 3D surface imaging system using structured light patterns including reconstruction, recognition and sampling criterion. To achieve an efficient reconstruction system, we address the problem in its many dimensions. In the first, we extract geometric 3D coordinates of an object which is illuminated by a set of concentric circular patterns and reflected to a 2D image plane. The relationship between the original and the deformed shape of the light patterns due to a surface shape provides sufficient 3D coordinates information. In the second, we consider system efficiency. The efficiency, which can be quantified by the size of data, is improved by reducing the number of circular patterns to be projected onto an object of interest. Akin to the Shannon-Nyquist Sampling Theorem, we derive the minimum number of circular patterns which sufficiently represents the target object with no considerable information loss. Specific geometric information (e.g. the highest curvature) of an object is key to deriving the minimum sampling density. In the third, the object, represented using the minimum number of patterns, has incomplete color information (i.e. color information is given a priori along with the curves). An interpolation is carried out to complete the photometric reconstruction. The results can be approximately reconstructed because the minimum number of the patterns may not exactly reconstruct the original object. But the result does not show considerable information loss, and the performance of an approximate reconstruction is evaluated by performing recognition or classification. In an object recognition, we use facial curves which are deformed circular curves (patterns) on a target object. We simply carry out comparison between the

  20. US manufacturers of commercially available stand-alone photovoltaic lighting systems

    SciTech Connect

    McNutt, P

    1994-05-01

    This report introduces photovoltaic (PV) lighting systems, gives some specifications for ordering these systems, and provides a list of some of the manufacturers of these systems in the United States. These PV lighting systems are all commercially available. They are stand-alone systems because they are not tied to the electric utility power grid.

  1. New Mobile Lidar Systems Aboard Ultra-Light Aircrafts

    NASA Astrophysics Data System (ADS)

    Chazette, Patrick; Shang, Xiaoxia; Totems, Julien; Marnas, Fabien; Sanak, Joseph

    2013-04-01

    Two lidar systems embedded on ultra light aircraft (ULA) flew over the Rhone valley, south-east of France, to characterize the vertical extend of pollution aerosols in this area influenced by large industrial sites. The main industrial source is the Etang de Berre (43°28' N, 5°01' E), close to Marseille city. The emissions are mainly due to metallurgy and petrochemical factories. Traffic related to Marseille's area contribute to pollution with its ~1500000 inhabitants. Note that the maritime traffic close to Marseille may play an important role due to its position as the leading French harbor . For the previous scientific purpose and for the first time on ULA, we flew a mini-N2 Raman lidar system to help the assessment of the aerosol optical properties. Another Ultra-Violet Rayleigh-Mie lidar has been integrated aboard a second ULA. The lidars are compact and eye safe instruments. They operate at the wavelength of 355 nm with a sampling along the line-of-sight of 0.75 m. Different flights plans were tested to use the two lidars in synergy. We will present the different approaches and discuss both their advantages and limitations. Acknowledgements: the lidar systems have been developed by CEA. They have been deployed with the support of FERRING France. We acknowledge the ULA pilots Franck Toussaint, François Bernard and José Coutet, and the Air Creation ULA Company for logistical help during the ULA campaign.

  2. A novel light tracing system with high-precision and high-sensitivity sensors setup

    NASA Astrophysics Data System (ADS)

    Lin, Chern-Sheng; Wu, Pin Yi; Tsai, Jen Min; Tseng, Yu Hung; Chen, Hsin-Hung; Hwang, Jiann-Lih

    2013-11-01

    This paper presents a novel light source tracing system, which is comprised of a light-tracing board, with four photo-sensors of different incline angles, correspondingly disposed on its four edges, which are adjustable according to the movement range of the light source in order to achieve light-tracing purposes. This system introduces the algorithm of four-edge-sensors with servo motors in each site to improve sensor's sensitivity. The measurement values of light perception can be feedback to the programmable logic controller by wireless transceiver module. After proportional-integral-derivative operation, the system can obtain the situation of light source. In a normal mode, the light source movement range is large, the range of the incline angle of the light sensors are also set to large to obtain wide detection angle. But in a locking mode, the incline angle of the light sensing plane decreases, thus, the measurement range reduces, and the sensitivity is higher.

  3. 32 CFR 636.34 - Restraint systems.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    .../Hunter Army Airfield installations. (c) Restraint systems will be worn by all soldiers and Reserve... the installations. (d) Infant/child restraint devices (car seats) are required in private owned vehicles for children 4 years old or under and not exceeding 45 pounds in weight. (e) Restraint systems...

  4. 46 CFR 35.10-15 - Emergency lighting and power systems-T/ALL.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 1 2011-10-01 2011-10-01 false Emergency lighting and power systems-T/ALL. 35.10-15... Emergency Requirements § 35.10-15 Emergency lighting and power systems—T/ALL. (a) Where fitted, it shall be the duty of the master to see that the emergency lighting and power systems are tested and...

  5. 46 CFR 35.10-15 - Emergency lighting and power systems-T/ALL.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Emergency lighting and power systems-T/ALL. 35.10-15... Emergency Requirements § 35.10-15 Emergency lighting and power systems—T/ALL. (a) Where fitted, it shall be the duty of the master to see that the emergency lighting and power systems are tested and...

  6. 46 CFR 97.15-30 - Emergency lighting and power systems.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Emergency lighting and power systems. 97.15-30 Section... VESSELS OPERATIONS Tests, Drills, and Inspections § 97.15-30 Emergency lighting and power systems. (a) Where fitted, it shall be the duty of the master to see that the emergency lighting and power...

  7. 46 CFR 35.10-15 - Emergency lighting and power systems-T/ALL.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 1 2013-10-01 2013-10-01 false Emergency lighting and power systems-T/ALL. 35.10-15... Emergency Requirements § 35.10-15 Emergency lighting and power systems—T/ALL. (a) Where fitted, it shall be the duty of the master to see that the emergency lighting and power systems are tested and...

  8. 46 CFR 97.15-30 - Emergency lighting and power systems.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Emergency lighting and power systems. 97.15-30 Section... VESSELS OPERATIONS Tests, Drills, and Inspections § 97.15-30 Emergency lighting and power systems. (a) Where fitted, it shall be the duty of the master to see that the emergency lighting and power...

  9. 46 CFR 196.15-30 - Emergency lighting and power systems.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 7 2014-10-01 2014-10-01 false Emergency lighting and power systems. 196.15-30 Section... VESSELS OPERATIONS Test, Drills, and Inspections § 196.15-30 Emergency lighting and power systems. (a) Where fitted, it shall be the duty of the master to see that the emergency lighting and power...

  10. 46 CFR 196.15-30 - Emergency lighting and power systems.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Emergency lighting and power systems. 196.15-30 Section... VESSELS OPERATIONS Test, Drills, and Inspections § 196.15-30 Emergency lighting and power systems. (a) Where fitted, it shall be the duty of the master to see that the emergency lighting and power...

  11. 46 CFR 196.15-30 - Emergency lighting and power systems.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Emergency lighting and power systems. 196.15-30 Section... VESSELS OPERATIONS Test, Drills, and Inspections § 196.15-30 Emergency lighting and power systems. (a) Where fitted, it shall be the duty of the master to see that the emergency lighting and power...

  12. 46 CFR 97.15-30 - Emergency lighting and power systems.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Emergency lighting and power systems. 97.15-30 Section... VESSELS OPERATIONS Tests, Drills, and Inspections § 97.15-30 Emergency lighting and power systems. (a) Where fitted, it shall be the duty of the master to see that the emergency lighting and power...

  13. 46 CFR 97.15-30 - Emergency lighting and power systems.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Emergency lighting and power systems. 97.15-30 Section... VESSELS OPERATIONS Tests, Drills, and Inspections § 97.15-30 Emergency lighting and power systems. (a) Where fitted, it shall be the duty of the master to see that the emergency lighting and power...

  14. 46 CFR 196.15-30 - Emergency lighting and power systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Emergency lighting and power systems. 196.15-30 Section... VESSELS OPERATIONS Test, Drills, and Inspections § 196.15-30 Emergency lighting and power systems. (a) Where fitted, it shall be the duty of the master to see that the emergency lighting and power...

  15. 46 CFR 196.15-30 - Emergency lighting and power systems.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Emergency lighting and power systems. 196.15-30 Section... VESSELS OPERATIONS Test, Drills, and Inspections § 196.15-30 Emergency lighting and power systems. (a) Where fitted, it shall be the duty of the master to see that the emergency lighting and power...

  16. 46 CFR 35.10-15 - Emergency lighting and power systems-T/ALL.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 1 2012-10-01 2012-10-01 false Emergency lighting and power systems-T/ALL. 35.10-15... Emergency Requirements § 35.10-15 Emergency lighting and power systems—T/ALL. (a) Where fitted, it shall be the duty of the master to see that the emergency lighting and power systems are tested and...

  17. 46 CFR 35.10-15 - Emergency lighting and power systems-T/ALL.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 1 2014-10-01 2014-10-01 false Emergency lighting and power systems-T/ALL. 35.10-15... Emergency Requirements § 35.10-15 Emergency lighting and power systems—T/ALL. (a) Where fitted, it shall be the duty of the master to see that the emergency lighting and power systems are tested and...

  18. 46 CFR 97.15-30 - Emergency lighting and power systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Emergency lighting and power systems. 97.15-30 Section... VESSELS OPERATIONS Tests, Drills, and Inspections § 97.15-30 Emergency lighting and power systems. (a) Where fitted, it shall be the duty of the master to see that the emergency lighting and power...

  19. Effects on biological systems of reflected light from a satellite power system

    NASA Technical Reports Server (NTRS)

    White, M.

    1981-01-01

    Light reflection produced by the satellite power system and the possible effects of that light on the human eye, plants, and animals were studied. For the human eye, two cases of reflected light, might cause eye damage if viewed for too long. These cases are: (1) if, while in low Earth orbit, the orbital transfer vehicle is misaligned to reflect the Sun to Earth there exists a maximum safe fixation time for the naked eye of 42.4 secs; (2) reflection from the aluminum paint on the back of the orbital transfer vehicle, while in or near low Earth orbit, can be safely viewed by the naked eye for 129 sec. For plants and animals the intensity and timing of light are not a major problem. Ways for reducing and/or eliminating the irradiances are proposed.

  20. Innovative light collimator with afocal lens and total internal reflection lens for daylighting system.

    PubMed

    Chen, Bo-Jian; Chen, Yin-Ti; Ullah, Irfan; Chou, Chun-Han; Chan, Kai-Cyuan; Lai, Yi-Lung; Lin, Chia-Ming; Chang, Cheng-Ming; Whang, Allen Jong-Woei

    2015-10-01

    This research presents a novel design of the collimator, which uses total internal reflection (TIR), convex, and concave lenses for the natural light illumination system (NLIS). The concept of the NLIS is to illuminate building interiors with natural light, which saves energy consumption. The TIR lens is used to collimate the light, and convex and concave lenses are used to converge the light to the required area. The results have shown that the efficiency in terms of achieving collimated light using the proposed collimator at the output of the light collector is better than that of a previous system without a collimator. PMID:26479648

  1. Drive system for engine-driven light vehicles

    SciTech Connect

    Matsutoh, T.; Wakatsuki, G.; Kitamura, Y.; Ishihara, T.

    1986-08-05

    A drive system is described for use in a light vehicle including an engine having a crankshaft and a wheel, the drive system including a friction roller disposed for frictional engagement with the wheel for transmitting the rotation of the engine to the wheel to the drive system being adapted to transmit the rotation of the wheel,the engine through the friction roller at the start of the engine. The drive system consists of: a drive shaft extending parallel with the crankshaft, the friction roller being supported on the drive shaft to be rotatively driven thereby; a power transmission means interposed between the drive shaft and the crankshaft, for transmitting the rotation of the drive shaft to the crankshaft with a given ratio of speed change appropriate for starting the engine; a one-way clutch engaging with the power transmission means and adapted to transmit only the rotation of the drive shaft to the crankshaft, whereby the rotation of the drive shaft is transmitted to the crankshaft through the power transmission means and the one-way clutch at the start of the engine; and a platetary gear assembly coupled to the power transmission means and adapted to transmit the rotation of the crankshaft to the drive shaft through the power transmission means with a given reduction ratio. The planetary gear assembly includes a centrifugal clutch disposed on the crankshaft for rotation therewith, the centrifugal clutch being adapted to transmit the rotation of the crankshaft to the drive shaft when the rotational speed of the crankshaft exceeds a predetermined value.

  2. Light Vehicle-Trailer Systems' Aerodynamics Testing and Simulation

    NASA Astrophysics Data System (ADS)

    Boyer, Henry; Sigurdson, Lorenz; Lange, Carlos

    2014-11-01

    A wide range of trailers with very poor aerodynamics are hauled long distances across a vast North American highway system. Our goal was to use preliminary smoke-wire flow visualizations to learn: the characteristic flow patterns over models representing modern Vehicle-Trailer Systems (VTS); what improvements need to be made in the experimental set-up; and if there is an opportunity for reduction in aerodynamic drag. Visualization tests were done in an open circuit wind tunnel, with a cross-sectional area of 0.3 m2. Detailed models of light duty trucks and trailers were used at a Reynolds number of 13,700. Images of the streaklines indicated two characteristic features. One was the presence of a stagnation point on the leading face of the trailer followed by a separation bubble on its top. The other feature was an unexpected separation bubble on the hood of the towing vehicle. We determined that it did not have a significant effect on the downstream flow pattern. By adding a small wedge deflector on the cab of the vehicle it was concluded that there is an opportunity for significant improvement of the VTS aerodynamics. Computational simulation of the flow is underway. Support from the Natural Sciences and Engineering Research Council of Canada Discovery Grant Number 41747 is gratefully acknowledged.

  3. Vegetable surface sterilization system using UVA light-emitting diodes.

    PubMed

    Aihara, Mutsumi; Lian, Xin; Shimohata, Takaaki; Uebanso, Takashi; Mawatari, Kazuaki; Harada, Yumi; Akutagawa, Masatake; Kinouchi, Yohsuke; Takahashi, Akira

    2014-01-01

    Surface sterilization of fresh produce has been needed in the food manufacturing/processing industry. Here we report a UVA-LED (Ultra Violet A-Light Emitting Diode) system for surface sterilization that is safe, efficacious, low cost, and apparently harmless to fresh produce. To test the system, Escherichia coli strain DH5α was spot-inoculated onto vegetable tissues, and treated under UVA-LED. Tissues were homogenized and bacteria quantified by colony-forming assay. Possible effects of UVA-LED on vegetable quality were evaluated by HPLC. Tissue weight changes were checked after treatment at 4℃, 15℃, and 30℃. Bacterial inactivation by UVA-LED radiation was observed after a 10 min treatment and increased with increasing time of irradiation. The log survival ratio reached -3.23 after a 90 min treatment. Bacterial cells surviving treatment grew slowly compared to non-irradiated control cells. Cabbage tissue lost weight over time after treatment, and weight loss increased with increasing incubation temperature, but there was no difference between losses by UVA-LED treated and control tissues at any temperature tested. In addition, no differences of Vitamin C content in cabbage tissue were detected by HPLC after UVA-LED treatment. These results suggest that UVA-LED treatment has great potential for vegetable surface sterilization in the food manufacturing/processing industry.

  4. Design and evaluation of natural light guiding system in ecological illumination of traffic tunnel

    NASA Astrophysics Data System (ADS)

    Chen, Cheng-Nan; Chen, Yi-Yung; Whang, Allen Jong-Woei; Chen, Li-Hsien

    2009-08-01

    Ecological traffic tunnel means that the manner can deal with tunnel project environmental problem of surrounding area and it is most close to the green environment. In general, we always use artificial light sources, such as traditional light sources and LED, to be the light source of illumination in the traffic tunnel. However, the best light source for the health of the human body is the natural light. If we can guide the sunlight into the tunnel to be lighting source, it would have a great benefit to the health of the human body. In this paper, we use Natural Light Guiding System to provide ecological illumination in traffic tunnel. The system has collecting, transmitting, and lighting parts. In the collecting part, we utilize a static concentrator to collect sunlight which is made up of a prismatic and cascadable unit. In the transmitting part, the collected sunlight is guided by optical fiber or lightpipe efficiently. In the lighting part, we design a lighting module of road lamp for lighting the inside the tunnel. The lighting module redistributes light to conform the traffic regulation. Finally, we build a model of traffic tunnel in optical software with Natural Light Guiding System to simulate the performance.

  5. Slow and fast light in a phase sensitive system

    NASA Astrophysics Data System (ADS)

    Shen, Shuo; Xu, Xiwei; Xiao, Yanhong

    2013-03-01

    Using atomic motion to coherently spread light information stored in atoms provides a novel means to manipulate atom-light interactions. We demonstrate light splitting with moving atoms in a paraffin coated vapor cell, by using phase sensitive degenerate four wave mixing, or self-rotation. This scheme amplifies the beam splitter signal, and in the meantime maintains the phase coherence between the beam splitter channels. Light storage efficiency in the beam-splitting channel can be also enhanced. Such an amplified beam splitter should have applications in optical memory, optical routers and atomic coherence control.

  6. Vacuum system for the LBL advanced light source (ALS)

    SciTech Connect

    Kennedy, K.

    1988-05-01

    A 1.5 to 1.9 GeV synchrotron light source is being built at LBL. The vacuum system is designed to permit all synchrotron photons on the median plane to escape the electron channel and go into an antechamber through a 10 mm high slot. This slot offers effective RF isolation between the electron duct and the antechamber. All unused synchrotron photons within a few mrad of the median plane will be stopped by 96 nearly horizontal absorbers located in the antechamber. The gas, generated by the photons hitting the absorbers, will be directed down to reactive titanium surfaces. Twelve 10 meter long vessels constitute the vacuum chambers for all the lattice magnets. Each chamber will be machined from two thick plates of 5083-H321 aluminum and welded at the perimeter. The nominal wall thickness of the vacuum chamber is 40 mm, which makes it possible to machine a flange into the chamber without the use of welding. 5 refs., 5 figs.

  7. Light scattering investigation of phase separation in a micelle system

    SciTech Connect

    Wilcoxon, J.P.; Martin, J.E.; Odinek, J.

    1993-12-31

    We report a real-time, two-dimensional light scattering study of the evolution of structure in a two component nonionic micelle system during phase separation via spinodal decomposition. Our principal finding is that domain growth proceeds much slower than the cube root of time prediction for simple binary fluids. In fact, the growth kinetics can be empirically described as a stretched exponential approach to a pinned domain size. Although the kinetics are not yet understood, this anomalous behavior may be due to the ability of the spherical micelles to reorganize into more complex structures. The domain structure also shows some anomalies. Although at short times the expected structure factor for a critical quench is observed, at long times the structure factor crosses over to the off-critical form. However, in all cases the average scattered intensity is proportional to the cube of the domain size. These findings are discussed in comparison to standard theories of and experimental work on binary fluids.

  8. An information-measuring system for evaluating performance parameters of lighting devices

    NASA Astrophysics Data System (ADS)

    Abulkhanov, Stanislav R.; Kharitonov, Sergey I.

    2016-04-01

    We propose the design of an information-measuring system for evaluating performance parameters of lighting devices. The system comprises four basic components: a software-hardware complex for designing lighting devices, an emulator of natural and technogeneous effects on an optical surface, an optical surface condition analyzer, and a lighting-device laboratory test unit. With this system, the duration of optical device certification tests can be reduced by several orders of magnitude when compared to full-scale tests.

  9. Phosphors for solid-state lighting: New systems, deeper understanding

    NASA Astrophysics Data System (ADS)

    Denault, Kristin Ashley

    We explore the structure-composition-property relationships in phosphor materials using a multitude of structural and optical characterization methods including high resolution synchrotron X-ray and neutron powder diffraction and total scattering, low-temperature heat capacity, temperature- and time-resolved photoluminescence, and density functional theory calculations. We describe the development of several new phosphor compositions and provide an in-depth description of the structural and optical properties. We show structural origins of improved thermal performance of photoluminescence and methods for determining structural rigidity in phosphor hosts that may lead to improved luminescent properties. New white light generation strategies are also explored. We begin by presenting the development of a green-yellow emitting oxyfluoride solid-solution phosphor Sr2Ba(AlO4F)1- x(SiO5)x:Ce3+. An examination of the host lattice, and the local structure around the Ce3+ activator ions points to how chemical substitutions play a crucial role in tuning the optical properties of the phosphor. The emission wavelength can be tuned from green to yellow by tuning the composition, x. Photoluminescent quantum yield is determined to be 70+/-5% for some of the examples in the series with excellent thermal properties. Phosphor-converted LED devices are fabricated using an InGaN LED and are shown to exhibit high color rendering white light. Next, we identify two new phosphor solid-solution systems, (Ba1- xSrx)9 Sc2Si6O24:Ce3+,Li+ and Ba9(Y1-ySc y)2Si6O24:Ce3+. The substitution of Sr for Ba in (Ba1-xSrx ) 9Sc2Si6O24:Ce 3+,Li + results in a decrease of the alkaline earth-oxygen bond distances at all three crystallographic sites, leading to changes in optical properties. The room temperature photoluminescent measurements show the structure has three excitation peaks corresponding to Ce3+ occupying the three independent alkaline earth sites. The emission of (Ba 1- xSrx) 9Sc2Si 6O24:Ce3

  10. Energy Integrated Design of Lighting, Heating, and Cooling Systems, and Its Effect on Building Energy Requirements.

    ERIC Educational Resources Information Center

    Meckler, Gershon

    Comments on the need for integrated design of lighting, heating, and cooling systems. In order to eliminate the penalty of refrigerating the lighting heat, minimize the building non-usable space, and optimize the total energy input, a "systems approach" is recommended. This system would employ heat-recovery techniques based on the ability of the…

  11. 77 FR 15812 - Initial Test Program of Condensate and Feedwater Systems for Light-Water Reactors

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-16

    ... COMMISSION Initial Test Program of Condensate and Feedwater Systems for Light-Water Reactors AGENCY: Nuclear...-1265, ``Initial Test Program of Condensate and Feedwater Systems for Light- Water Reactors.'' DG-1265... plant startup, and power ascension tests for the condensate and feedwater systems in all types of...

  12. 21 CFR 866.5550 - Immunoglobulin (light chain specific) immunological test system.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Immunoglobulin (light chain specific) immunological test system. 866.5550 Section 866.5550 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... Test Systems § 866.5550 Immunoglobulin (light chain specific) immunological test system....

  13. 21 CFR 866.5550 - Immunoglobulin (light chain specific) immunological test system.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Immunoglobulin (light chain specific) immunological test system. 866.5550 Section 866.5550 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... Test Systems § 866.5550 Immunoglobulin (light chain specific) immunological test system....

  14. 21 CFR 866.5550 - Immunoglobulin (light chain specific) immunological test system.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Immunoglobulin (light chain specific) immunological test system. 866.5550 Section 866.5550 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... Test Systems § 866.5550 Immunoglobulin (light chain specific) immunological test system....

  15. 21 CFR 866.5550 - Immunoglobulin (light chain specific) immunological test system.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Immunoglobulin (light chain specific) immunological test system. 866.5550 Section 866.5550 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... Test Systems § 866.5550 Immunoglobulin (light chain specific) immunological test system....

  16. 21 CFR 866.5550 - Immunoglobulin (light chain specific) immunological test system.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Immunoglobulin (light chain specific) immunological test system. 866.5550 Section 866.5550 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... Test Systems § 866.5550 Immunoglobulin (light chain specific) immunological test system....

  17. In-field stray light due to surface scattering effects in infrared imaging systems

    NASA Astrophysics Data System (ADS)

    Sun, Ke; Jiang, Hou-man; Cheng, Xiang-ai

    2011-08-01

    In-field stray light caused by surface scattering is a serious problem in many infrared imaging systems. Light that scattered from lenses in infrared imaging system produces a halo of stray light within the field of view and often degrades the performance of an optical system especially irradiated by intensive light such as laser. The experiments are performed by using infrared thermal imaging system, irradiated by CW DF infrared laser. The relationship between the diameter of saturated area on the detector and the incident laser irradiance is obtained, which can be well explained by the point spread function (PSF) of the optics including both diffraction and scattering components.

  18. Results from computer program for analyzing scattered light suppression systems for large space telescope

    NASA Technical Reports Server (NTRS)

    Tifft, W. G.; Fannin, B. B.

    1974-01-01

    A computer program was developed which has the ability to analyze the performance of most light suppression systems so as to predict the amount of scattered light which will reach the image plane for various conditions of unwanted light input from the sun, earth, or moon. This program was used to analyze three different configurations of the large space telescope (LST): an LST with a truncated sunshield, an LST with an extended cylindrical sunshield, and an LST with a conical sunshield which is tilted upwards. The computer program gives the user detailed information as to the paths taken by the unwanted stray light to reach the image plane, and pinpoints those portions of the light suppression system which contribute most of the stray light, so that areas requiring improvements are evident. Certain design guide lines were formulated for any light suppression system selected for the LST, and one which meets these requirements (the tilted sunshade) is described in detail.

  19. Nondipole Effects in Chiral Systems Measured with Linearly Polarized Light

    NASA Astrophysics Data System (ADS)

    Bowen, K. P.; Hemmers, O.; Guillemin, R.; Stolte, W. C.; Piancastelli, M. N.; Lindle, D. W.

    2015-06-01

    With the advent of third-generation synchrotron light sources, it has been demonstrated that higher-order corrections to the dipole approximation are necessary for the description of light-matter interactions in the soft x-ray range. These effects, known as 'nondipole effects', present themselves as asymmetries in the angular distributions of photoelectrons. Chiral molecules, known to have asymmetries in photoelectron angular distributions when exposed to circularly polarized light, have been proposed to demonstrate a chiral-specific nondipole effect when exposed to linearly polarized light. We present the first-ever measurement of nondipole chiral angular distributions for the case of each enantiomer of camphor in the photon energy range 296-343eV.

  20. 14 CFR 29.1401 - Anticollision light system.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ...) General. If certification for night operation is requested, the rotorcraft must have an anticollision... emitted light will not impair the crew's vision or detract from the conspicuity of the position...

  1. 14 CFR 27.1401 - Anticollision light system.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ...) General. If certification for night operation is requested, the rotorcraft must have an anticollision... emitted light will not impair the crew's vision or detract from the conspicuity of the position...

  2. Green light effects on biological systems: a new biophysical phenomenon.

    PubMed

    Comorosan, Sorin; Kappel, Wilhelm; Constantinescu, Ileana; Gheorghe, Marin; Ionescu, Elena; Pîrvu, Cristian; Cinca, Sabin; Cristache, Ligia

    2009-08-01

    This paper reports a new phenomenon connected with the influence of green light (GL) on biological systems. Our experiments have revealed an antioxidant effect of GL on cells subjected to lethal doses of UV at the cellular level and a protective effect of GL on DNA denatured by UV, coupled with a structural modification of DNA macromolecules under GL irradiation, at the molecular level. Mouse melanocyte cultures are subjected to UV irradiations with L(50) fluxes of 16.0 J m(-2) s(-1). GL is obtained from a strontium aluminate pigment, which emits GL under UV activation. Cells grown in GL, prior to UV irradiation, present a clear surprising protective effect with surviving values close to the controls. A GL antioxidant effect is suggested to be mediated through GL influence on cellular water cluster dynamics. To test this hypothesis, reactive oxygen species (ROS) are determined in cell cultures. The results revealed a decrease of cellular ROS generation in the UV-irradiated samples protected by a previous 24 h of GL irradiation. At the DNA level, the same type of GL protection against UV damage is recorded by gel electrophoresis and by UV spectroscopy of the irradiated DNA molecules. Two physical methods, impedance spectroscopy and chronoamperometry, have revealed at the level of GL-irradiated DNA molecules spectral modifications that correlate with the UV spectroscopy results. The interaction between the chargeless photons and the field of water molecules from the cellular compartments is discussed in relation with the new field of macroscopic quantum coherence phenomena. PMID:19669578

  3. Analysis of light emitting diode array lighting system based on human vision: normal and abnormal uniformity condition.

    PubMed

    Qin, Zong; Ji, Chuangang; Wang, Kai; Liu, Sheng

    2012-10-01

    In this paper, condition for uniform lighting generated by light emitting diode (LED) array was systematically studied. To take human vision effect into consideration, contrast sensitivity function (CSF) was novelly adopted as critical criterion for uniform lighting instead of conventionally used Sparrow's Criterion (SC). Through CSF method, design parameters including system thickness, LED pitch, LED's spatial radiation distribution and viewing condition can be analytically combined. In a specific LED array lighting system (LALS) with foursquare LED arrangement, different types of LEDs (Lambertian and Batwing type) and given viewing condition, optimum system thicknesses and LED pitches were calculated and compared with those got through SC method. Results show that CSF method can achieve more appropriate optimum parameters than SC method. Additionally, an abnormal phenomenon that uniformity varies with structural parameters non-monotonically in LALS with non-Lambertian LEDs was found and analyzed. Based on the analysis, a design method of LALS that can bring about better practicability, lower cost and more attractive appearance was summarized.

  4. A high-efficiency indirect lighting system utilizing the solar 1000 sulfur lamp

    SciTech Connect

    Siminovitch, M.; Gould, C.; Page, E.

    1997-06-01

    High-lumen light sources represent unique challenges and opportunities for the design of practical and efficient interior lighting systems. High-output sources require a means of large-scale distribution and avoidance of high-luminance glare while providing efficient delivery. An indirect lighting system has been developed for use with a 1,000 Watt sulfur lamp that efficiently utilizes the high-output source to provide quality interior lighting. This paper briefly describes the design and initial testing of this new system.

  5. Analysis and simulation of an automated LED lighting system for pedestrian crosswalk

    NASA Astrophysics Data System (ADS)

    Ileana, Ioan; Risteiu, Mircea; Marc, Gheorghe; Sofalca, Ionut

    2015-02-01

    This paper approaches the design of a smart lighting system for efficient lighting of pedestrian crosswalks on streets, using power LEDs. Starting with existing solid-state lighting - SSL (power LEDs with individual directivity diagram, lighting efficiency and color rendering index - CRI) in the paper we propose a design technique and methodology in order to find the distribution geometry of light sources (sources number, spatial coordinates, fixing angles) that simultaneously satisfy the lighting regulation requests and energetic efficiency. The major achievements are the simulations of using of a great number of LED lighting sources and of spatial lighting configurations in order to obtain of a uniform lighting of the area of interest (fig.1) and in conformity with actual standards in a specified scenario. The direct consequence of these simulations is the using of an intelligent management system of LED lighting sources that will allow the optimization of light flux in real traffic conditions of cars and pedestrians. This means the monitoring of traffic level and surrounding conditions (temperature, humidity, natural lighting etc.) in order to efficient use the existing resources.

  6. Light field and crosshair quality assurance test using a simple lens system

    SciTech Connect

    Hadley, Scott W.; Lam, Kwok

    2006-04-15

    We describe here a simple lens system to test the positioning of the field light source and mylar crosshair for radiation therapy linear accelerators. Ideally the light source for the field light and the crosshair should be centered on the axis of rotation of the collimator. The traditional method for testing this coincidence uses the shadow of the crosshair caused by the field light source. The shadow of the crosshair is dependent on the position of both the field light source and mylar crosshair. Geometrically it is possible for the field light source and the mylar crosshair to be off the axis of rotation of the collimator and still cause the shadow of the crosshair to be on the axis of rotation at some distance. Using a lens system the motion of the field light source and crosshair can be observed in sharp focus independently of one another as the collimator is rotated.

  7. LED collimation module for time sequential back light system

    NASA Astrophysics Data System (ADS)

    Lin, Jou-Hui; Lee, Chi-Hung; Tai, An-Ching; Chen, Yu-Hsuan; Ma, Shih-Hsin

    2014-09-01

    In this study, a collimated LED light source has been developed as a colorful liquid crystal display backlight, which is driven by a two-field driving scheme to display color. In each field, the angular rays of two colors from LEDs are collimated by a collimation lens, redirected by a light guide and converged by a cylindrical-lens array to map into corresponding sub-pixel positions for efficiently displaying color image. The simulation results of the backlight module and the corresponding experimental results will be discussed in detail.

  8. 76 FR 47178 - Energy Efficiency Program: Test Procedure for Lighting Systems (Luminaires)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-04

    ... whether the program met the objectives set forth in EPAct 1992 (61 FR 10742, March 15, 1996). DOE found... 1904-AC50 Energy Efficiency Program: Test Procedure for Lighting Systems (Luminaires) AGENCY: Office of... efficiency test procedures for luminaires (also referred to herein as lighting systems) and...

  9. Rapidly reconfigurable slow-light system based on off-resonant Raman absorption

    NASA Astrophysics Data System (ADS)

    Vudyasetu, Praveen K.; Camacho, Ryan M.; Howell, John C.

    2010-11-01

    We present a slow-light system based on dual Raman absorption resonances in warm rubidium vapor. Each Raman absorption resonance is produced by a control beam in an off-resonant Λ system. This system combines all optical control of the Raman absorption and the low-dispersion broadening properties of the double Lorentzian absorption slow light. The bandwidth, group delay, and central frequency of the slow-light system can all be tuned dynamically by changing the properties of the control beam. We demonstrate multiple pulse delays with low distortion and show that such a system has fast switching dynamics and thus fast reconfiguration rates.

  10. Real time seismic traffic light systems for hydraulic stimulations in deep geothermal systems

    NASA Astrophysics Data System (ADS)

    Wegler, Ulrich; Vasterling, Margarete; Dinske, Carsten; Becker, Jan

    2015-04-01

    In order to mitigate the risk associated with induced seismicity caused by hydraulic stimulations in deep geothermal systems so called traffic light systems (risk management plans) are used. These systems consist of a local seismic monitoring and an estimate of the current seismic hazard based on observed induced seismicity. The current hazard is compared to threshold values. Measures to reduce the seismic hazard (e.g. reducing the flow rate) specified in the risk management plan are taken, if thresholds are exceeded. Standard traffic light systems use the largest recorded magnitude or peak ground velocity to estimate current seismic hazard caused by induced earthquakes. We developed a real time technique that computes the probability of exceedance for an undesired magnitude using a statistical analysis of recorded micro-seismicity. Based on the in real time generated earthquake catalogue, we compute the magnitude of completeness, the b-value of the Gutenberg-Richter law, and the so-called seismogenic index. These three quantities are updated in real time, if more induced earthquakes are detected. Using the flow rate of the hydraulic stimulation, which we assume to be recorded in real time as well, we calculate the expected seismicity for the next hours. In particular, we compute the probability of exceedance for a predefined critical magnitude. The value is permanently updated and compared to predefined threshold values of the traffic light system. Additionally to the scenario of a continued stimulation with the current flow rate, we also consider the case of an immediate shut-in. For this scenario the probability of exceedance is computed using a modified Omori law. The developed algorithm is implemented in the real-time earthquake monitoring software SeisComP3 including a graphical user interface. So far the traffic light algorithm has only been tested in playback mode simulating a real time scenario. For example, using data of the Basel Deep Heat Mining project

  11. A Red-Light Running Prevention System Based on Artificial Neural Network and Vehicle Trajectory Data

    PubMed Central

    Li, Pengfei; Li, Yan; Guo, Xiucheng

    2014-01-01

    The high frequency of red-light running and complex driving behaviors at the yellow onset at intersections cannot be explained solely by the dilemma zone and vehicle kinematics. In this paper, the author presented a red-light running prevention system which was based on artificial neural networks (ANNs) to approximate the complex driver behaviors during yellow and all-red clearance and serve as the basis of an innovative red-light running prevention system. The artificial neural network and vehicle trajectory are applied to identify the potential red-light runners. The ANN training time was also acceptable and its predicting accurate rate was over 80%. Lastly, a prototype red-light running prevention system with the trained ANN model was described. This new system can be directly retrofitted into the existing traffic signal systems. PMID:25435870

  12. A red-light running prevention system based on artificial neural network and vehicle trajectory data.

    PubMed

    Li, Pengfei; Li, Yan; Guo, Xiucheng

    2014-01-01

    The high frequency of red-light running and complex driving behaviors at the yellow onset at intersections cannot be explained solely by the dilemma zone and vehicle kinematics. In this paper, the author presented a red-light running prevention system which was based on artificial neural networks (ANNs) to approximate the complex driver behaviors during yellow and all-red clearance and serve as the basis of an innovative red-light running prevention system. The artificial neural network and vehicle trajectory are applied to identify the potential red-light runners. The ANN training time was also acceptable and its predicting accurate rate was over 80%. Lastly, a prototype red-light running prevention system with the trained ANN model was described. This new system can be directly retrofitted into the existing traffic signal systems.

  13. 14 CFR 27.1387 - Position light system dihedral angles.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Equipment Lights § 27.1387 Position... parallel to the longitudinal axis of the rotorcraft, and the other at 110 degrees to the left of the first... two intersecting vertical planes, the first parallel to the longitudinal axis of the rotorcraft,...

  14. 14 CFR 27.1387 - Position light system dihedral angles.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Equipment Lights § 27.1387 Position... parallel to the longitudinal axis of the rotorcraft, and the other at 110 degrees to the left of the first... two intersecting vertical planes, the first parallel to the longitudinal axis of the rotorcraft,...

  15. A new method to manipulate broiler chicken growth and metabolism: Response to mixed LED light system.

    PubMed

    Yang, Yefeng; Yu, Yonghua; Pan, Jinming; Ying, Yibin; Zhou, Hong

    2016-01-01

    Present study introduced a new method to manipulate broiler chicken growth and metabolism by mixing the growth-advantage LED. We found that the green/blue LED mixed light system (G-B and G × B) have the similar stimulatory effect on chick body weight with single green light and single blue light (G and B), compared with normal artificial light (P = 0.028). Moreover, the percentage of carcass was significantly greater in the mixed light (G × B) when compared with the single light (P = 0.003). Synchronized with body weight, the mixed light (G-B and G × B) had a significant improved influence on the feed conversion of birds compared with normal light (P = 0.002). A significant improvement in feed conversion were found in mixed light (G × B) compared with single LED light (P = 0.037). G group resulted in a greater high-density lipoprotein cholesterol level than B group (P = 0.002), whereas B group resulted in a greater low-density lipoprotein cholesterol level than G group (P = 0.017). The mixed light significantly increased the birds' glucose level in comparison with the single light (P = 0.003). This study might establish an effective strategy for maximizing growth of chickens by mixed LED technology. PMID:27170597

  16. A new method to manipulate broiler chicken growth and metabolism: Response to mixed LED light system

    PubMed Central

    Yang, Yefeng; Yu, Yonghua; Pan, Jinming; Ying, Yibin; Zhou, Hong

    2016-01-01

    Present study introduced a new method to manipulate broiler chicken growth and metabolism by mixing the growth-advantage LED. We found that the green/blue LED mixed light system (G-B and G × B) have the similar stimulatory effect on chick body weight with single green light and single blue light (G and B), compared with normal artificial light (P = 0.028). Moreover, the percentage of carcass was significantly greater in the mixed light (G × B) when compared with the single light (P = 0.003). Synchronized with body weight, the mixed light (G-B and G × B) had a significant improved influence on the feed conversion of birds compared with normal light (P = 0.002). A significant improvement in feed conversion were found in mixed light (G × B) compared with single LED light (P = 0.037). G group resulted in a greater high-density lipoprotein cholesterol level than B group (P = 0.002), whereas B group resulted in a greater low-density lipoprotein cholesterol level than G group (P = 0.017). The mixed light significantly increased the birds’ glucose level in comparison with the single light (P = 0.003). This study might establish an effective strategy for maximizing growth of chickens by mixed LED technology. PMID:27170597

  17. A new method to manipulate broiler chicken growth and metabolism: Response to mixed LED light system

    NASA Astrophysics Data System (ADS)

    Yang, Yefeng; Yu, Yonghua; Pan, Jinming; Ying, Yibin; Zhou, Hong

    2016-05-01

    Present study introduced a new method to manipulate broiler chicken growth and metabolism by mixing the growth-advantage LED. We found that the green/blue LED mixed light system (G-B and G × B) have the similar stimulatory effect on chick body weight with single green light and single blue light (G and B), compared with normal artificial light (P = 0.028). Moreover, the percentage of carcass was significantly greater in the mixed light (G × B) when compared with the single light (P = 0.003). Synchronized with body weight, the mixed light (G-B and G × B) had a significant improved influence on the feed conversion of birds compared with normal light (P = 0.002). A significant improvement in feed conversion were found in mixed light (G × B) compared with single LED light (P = 0.037). G group resulted in a greater high-density lipoprotein cholesterol level than B group (P = 0.002), whereas B group resulted in a greater low-density lipoprotein cholesterol level than G group (P = 0.017). The mixed light significantly increased the birds’ glucose level in comparison with the single light (P = 0.003). This study might establish an effective strategy for maximizing growth of chickens by mixed LED technology.

  18. Design and construction evaluation of a photovoltaic DC LED lighting system

    NASA Astrophysics Data System (ADS)

    Bhamidipati, Jyotsna

    2008-08-01

    The market demand for commercialization of Photovoltaic (PV) systems depends a lot on the reliability, efficiency and performance of various components within the system. PV panels produce DC power when exposed to sunlight, and an inverter converts this to AC power in a typical solar powered building. Though, PV lighting has existed for a long time it hasn't been very effective, as incandescent light sources were commonly used which are inefficient. Today fluorescent fixtures are mostly used with PV's due to its high efficacy. Light-emitting diodes present a new vision to energy efficiency in lighting design with their low energy consumption. Current research predicts improved efficiencies of LED light fixtures and their commercial use is a few years away. LEDs which operate on DC voltages when coupled with photovoltaics can be a simple PV lighting application and a sustainable solution with potential for payback. This research evaluates the design and construction of a photovoltaic DC LED lighting system for a solar house at Pennsylvania State University. A detailed cost and payback analysis of a PV DC LED lighting system is presented in this research. PV output simulations for the solar house are presented. Results presented in this research indicate that the Solid state lighting market is evolving rapidly and that LED's are a choice in stand-alone photovoltaic DC lighting systems. The efficiency and the cost-effectiveness of such systems would however improve in the coming years with research and development now focused on PV systems and on Solid state lighting technologies.

  19. The light pen of a no guide 3D-coordinate measuring system

    NASA Astrophysics Data System (ADS)

    Zhang, Xiaofang; Jiang, Chengzhi; Xue, Tongze; Li, Cuiying; Wang, Biru

    2006-11-01

    With the advantages of simple structure, high speed, and high accuracy, a no guide 3D-coordinate measuring technique that using the photoelectric detectors with intersection converge imaging has the predominance in workshop measurement. Its measuring head is made in a pen shape with several light sources, which is called as the light pen. In this paper, the structure design and self-calibration of light pen system are analyzed, and the identifying way for multi-sources on light pen is present. The Laser-balls are offered to be the light-sources while the principles as well as fabrication are introduced. The light pen can insert and touch the points of inner surface in a deep hole. So the localization of CMM can be avoided by using the light pen with simple and deft structure.

  20. Design and optimization of dot pattern in illumination lightpipe of natural light guiding system

    NASA Astrophysics Data System (ADS)

    Lee, Zong-Yi; Chen, Yi-Yung; Whang, Allen Jong-Woei

    2009-08-01

    In recent years, the practicality and importance of the illumination with sunlight are getting more seriously concern in public. The reason is that natural light is non-polluting, energy-saving, and healthy in comparison with traditional light sources. Therefore, our research focuses on how to replace the artificial sources by natural light. A Natural Light Guiding System has collecting, transmitting, and lighting parts. For replacing the traditional sources, the lighting part should have similar characteristic, such as intensity distribution and geometric parameters, to artificial sources. In this paper, we design, simulate, and optimize illumination lightpipe with dot pattern to redistribute the collecting sunlight from Natural Light Guiding System. The lightpipe includes input, system, and output parts. In the input part, we design a coupler to improve the coupling efficiency with natural light. For optimizing the efficiency of the coupler, we evaluate the relationship between the distance that is from the fiber to the lightpipe and the coupled power. In the system part, the sunlight is locked by total internal reflection, TIR, so we design dot pattern to scatter the locked sunlight for uniform lighting. In the output part, a uniform illumination is our goal. For designing the percentage of the surface will be covered by dot pattern, we offer a design theory and simulate the efficiency.

  1. An empirical study on energy efficiency improvement through photovoltaic systems and a LED lighting control system

    NASA Astrophysics Data System (ADS)

    Choi, Young Kwan; Lee, Jae Hyeong

    2015-09-01

    In this research, a facility was constructed and its performance was analyzed to improve the energy efficiency of a vertical-type water treatment building. After the design and construction of a fixed tilt Photovoltaic in Building (PVIB) on the rooftop using a crystalline silicon solar cell module and photovoltaic generator integrated with the building by using a Building Integrated Photovoltaic System (BIPV), a thin-film module on the rooftop and outer wall of water treatment building, and the generation efficiency was analyzed. Also, a DC distribution was established for use of a brushless DC (BLDC) pump motor, and the existing lighting-facility-based manual on-off method was turned into a system for energy conservation by controlling light emitting diode (LED) through a wireless motion sensor and dimming control. In addition, a Building Energy Management System (BEMS) for a real-time analysis of the energy efficiency for a vertical0type water treatment building was prepared and tested. The vertical-type water treatment building developed in this study is currently operating the BEMS. The vertical-type water treatment building reported in this paper is expected to reduce energy consumption by about 30% compared to existing water treatment systems.

  2. Deducing effective light transport parameters in optically thin systems

    NASA Astrophysics Data System (ADS)

    Mazzamuto, G.; Pattelli, L.; Toninelli, C.; Wiersma, D. S.

    2016-02-01

    We present an extensive Monte Carlo study on light transport in optically thin slabs, addressing both axial and transverse propagation. We systematically characterize diffusive transport in this intermediate scattering regime, notably in terms of the spatial variance of the transmitted/reflected profile. Focusing on late, multiply scattered light, we test the validity of the prediction cast by diffusion theory that the spatial variance should grow independently of absorption and, to a first approximation, of the sample thickness and refractive index contrast. Based on a large set of simulated data, we build a freely available look-up table routine enabling reliable and precise determination of the microscopic transport parameters starting from robust observables which are independent from absolute intensity measurements. We also present the Monte Carlo software package that was developed for the purpose of this study.

  3. Light Activated Serotonin for Exploring Its Action in Biological Systems

    PubMed Central

    Rea, Adam C.; Vandenberg, Laura N.; Ball, Rebecca E.; Snouffer, Ashley A.; Hudson, Alicia G.; Zhu, Yue; McLain, Duncan E.; Johnston, Lindsey L.; Lauderdale, James D.; Levin, Michael; Dore, Timothy M.

    2013-01-01

    Summary Serotonin (5-HT) is a neuromodulator involved in regulating mood, appetite, memory, learning, pain, and establishment of left-right (LR) asymmetry in embryonic development. To explore the role of 5-HT in a variety of physiological contexts, we have created two forms of “caged” 5-HT, BHQ-O-5HT and BHQ-N-5HT. When exposed to 365- or 740-nm light, BHQ-O-5HT releases 5-HT through 1- or 2-photon excitation, respectively. BHQ-O-5HT mediated changes in neural activity in cultured primary sensory neurons from mouse and the trigeminal ganglion and optic tectum of intact zebrafish larvae in the form of high amplitude spiking in response to light. In Xenopus laevis embryos, 5-HT released from BHQ-O-5HT upon exposure to light increased the occurrence of LR patterning defects. Maximal rates of LR defects were observed when 5-HT was released at stage 5 compared to stage 8. These experiments show the potential for BHQ-caged serotonins in studying 5-HT-regulated physiological processes. PMID:24333002

  4. Principles of optical system construction for forming a cylindrical light tube

    NASA Astrophysics Data System (ADS)

    Ezhova, Kseniia; Zverev, Victor

    2016-04-01

    In this paper the basic principles of the optical system construction for forming a cylindrical light tube of assigned diameter are formulated. It is based on the principle of agreement aperture and field angle of the optical system and the possibility of converting the transverse dimensions of the cylindrical light tubes by using the afocal optical system. In general, the task of converting a formed cylindrical light tube with the desired dimensions in the reverse path of the rays can be solved with a help of the single afocal system consisting of two positive components. In paper some variants of the optical system scheme for preliminary (initial) conversion of light tubes with an indication of their main advantages and disadvantages are presented. Aberration analysis of optical systems was carried out.

  5. Minimizing lighting power density in office rooms equipped with Anidolic Daylighting Systems

    SciTech Connect

    Linhart, Friedrich; Scartezzini, Jean-Louis

    2010-04-15

    Electric lighting is responsible for up to one third of an office building's electricity needs. Making daylight more available in office buildings can not only contribute to significant energy savings but also enhance the occupants' performance and wellbeing. Anidolic Daylighting Systems (ADS) are one type of very effective facade-integrated daylighting systems. All south-facing office rooms within the LESO solar experimental building in Lausanne (Switzerland) are equipped with a given type of ADS. A recent study has shown that these offices' occupants are highly satisfied with their lighting environment. The most energy-efficient south-facing offices have a lighting power density of less than 5W/m{sup 2}. The lighting situation within these ''best practice''-offices has been assessed using the lighting simulation software RELUX Vision. Because this lighting situation is very much appreciated by the occupants, it was used as a starting point for developing even more energy-efficient office lighting designs. Two new lighting designs, leading to lighting power densities of 3.9W/m{sup 2} and 3W/m{sup 2}, respectively, have been suggested and simulated with RELUX Vision. Simulation results have shown that the expected performances of these new systems are comparable to that of the current lighting installation within the ''best practice''-offices or even better. These simulation results have been confirmed during experiments on 20 human subjects in a test office room recently set up within the LESO building. This article gives engineers, architects and light planers valuable information and ideas on how to design energy-efficient and comfortable electric lighting systems in office rooms with abundant access to daylight. (author)

  6. Illumination performance and energy saving of a solar fiber optic lighting system.

    PubMed

    Lingfors, David; Volotinen, Tarja

    2013-07-01

    The illumination performance and energy savings of a solar fiber optic lighting system have been verified in a study hall--corridor interior. The system provides intensive white light with a high luminous flux of 4500 lm under 130000 lx direct sun radiation at a 10 m fiber distance from the sun-tracking light collector. The color temperature that describes the light color perceived is 5800 ± 300 K, i.e. close to the direct sunlight outside, and the color rendering index (86), that describes how well colors are rendered under the light source, is higher for the solar lights than for the supplementary fluorescent lights (77). Thus this high quality solar lighting improves the visibility of all kinds of objects compared to the fluorescent lights. Annual lighting energy savings of 19% in Uppsala, Sweden and 46% in southern Europe were estimated for a study hall interior, as well as 27% and 55% respectively in an interior illuminated 16 h per day all days of a year.

  7. Study for standardization of the lighting system in fruit sorting

    NASA Astrophysics Data System (ADS)

    Gomes, J. F. S.; Baldner, F. O.; Costa, P. B.; Guedes, M. B.; Oliveira, I. A. A.; Leta, F. R.

    2016-07-01

    Sorting is a very important step in the fruit processing. The attributes definition and characterization are important for both marketing and end user, making it necessary to establish regulations for classification and standardization in order to unify the language of the market and enabling a more efficient market and also increase consumer awareness. For this end, it is necessary to standardize the technical criteria that can change the perception of the product. Studies have been developed in order to standardize a methodology to determine the subclass of fruit ripening, evaluating the influence of different light sources in the subclass evaluation.

  8. A light-curve distortion-wave analysis of eight RS Canum Venaticorum systems

    NASA Astrophysics Data System (ADS)

    Caton, D. B.

    1986-01-01

    A program of differential U,B,V photometry of 14 RS CVn systems carried out at Rosemary Hill Observatory in 1978 - 1981 is described, and an analysis of the light curves for the characteristic distortion wave for eight of the systems is presented. The V light curves of the systems are shown. Significant waves were observed in RS CVn, RZ Eri, and RW UMa. No significant waves were found in UX Com, GK Hya, AR Lac, LX Per, or TY Pyx. Unusual light curve distortions were observed in UX Com and AR Lac.

  9. A light-inducible CRISPR/Cas9 system for control of endogenous gene activation

    PubMed Central

    Polstein, Lauren R.; Gersbach, Charles A.

    2015-01-01

    Optogenetic systems enable precise spatial and temporal control of cell behavior. We engineered a light-activated CRISPR/Cas9 effector (LACE) system that induces transcription of endogenous genes in the presence of blue light. This was accomplished by fusing the light-inducible heterodimerizing proteins CRY2 and CIB1 to a transactivation domain and the catalytically inactive dCas9, respectively. The versatile LACE system can be easily directed to new DNA sequences for the dynamic regulation of endogenous genes. PMID:25664691

  10. 49 CFR 37.47 - Key stations in light and rapid rail systems.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Key stations in light and rapid rail systems. 37.47 Section 37.47 Transportation Office of the Secretary of Transportation TRANSPORTATION SERVICES FOR INDIVIDUALS WITH DISABILITIES (ADA) Transportation Facilities § 37.47 Key stations in light and rapid...

  11. 46 CFR 109.211 - Testing of emergency lighting and power systems.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Testing of emergency lighting and power systems. 109.211 Section 109.211 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Tests, Drills, and Inspections § 109.211 Testing of emergency lighting and...

  12. 46 CFR 109.211 - Testing of emergency lighting and power systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Testing of emergency lighting and power systems. 109.211 Section 109.211 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Tests, Drills, and Inspections § 109.211 Testing of emergency lighting and...

  13. 46 CFR 109.211 - Testing of emergency lighting and power systems.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Testing of emergency lighting and power systems. 109.211 Section 109.211 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Tests, Drills, and Inspections § 109.211 Testing of emergency lighting and...

  14. 46 CFR 109.211 - Testing of emergency lighting and power systems.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Testing of emergency lighting and power systems. 109.211 Section 109.211 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Tests, Drills, and Inspections § 109.211 Testing of emergency lighting and...

  15. 46 CFR 109.211 - Testing of emergency lighting and power systems.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Testing of emergency lighting and power systems. 109.211 Section 109.211 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS Tests, Drills, and Inspections § 109.211 Testing of emergency lighting and...

  16. Light Emitting, Photovoltaic or Other Electronic Apparatus and System

    NASA Technical Reports Server (NTRS)

    Ray, William Johnstone (Inventor); Lowenthal, Mark D. (Inventor); Shotton, Neil O. (Inventor); Blanchard, Richard A. (Inventor); Lewandowski, Mark Allan (Inventor); Fuller, Kirk A. (Inventor); Frazier, Donald Odell (Inventor)

    2016-01-01

    The present invention provides an electronic apparatus, such as a lighting device comprised of light emitting diodes (LEDs) or a power generating apparatus comprising photovoltaic diodes, which may be created through a printing process, using a semiconductor or other substrate particle ink or suspension and using a lens particle ink or suspension. An exemplary apparatus comprises a base; at least one first conductor; a plurality of diodes coupled to the at least one first conductor; at least one second conductor coupled to the plurality of diodes; and a plurality of lenses suspended in a polymer deposited or attached over the diodes. The lenses and the suspending polymer have different indices of refraction. In some embodiments, the lenses and diodes are substantially spherical, and have a ratio of mean diameters or lengths between about 10:1 and 2:1. The diodes may be LEDs or photovoltaic diodes, and in some embodiments, have a junction formed at least partially as a hemispherical shell or cap.

  17. Light emitting, photovoltaic or other electronic apparatus and system

    NASA Technical Reports Server (NTRS)

    Ray, William Johnstone (Inventor); Lowenthal, Mark D. (Inventor); Shotton, Neil O. (Inventor); Blanchard, Richard A. (Inventor); Lewandowski, Mark Allan (Inventor); Fuller, Kirk A. (Inventor); Frazier, Donald Odell (Inventor)

    2013-01-01

    The present invention provides an electronic apparatus, such as a lighting device comprised of light emitting diodes (LEDs) or a power generating apparatus comprising photovoltaic diodes, which may be created through a printing process, using a semiconductor or other substrate particle ink or suspension and using a lens particle ink or suspension. An exemplary apparatus comprises a base; at least one first conductor; a plurality of substantially spherical or optically resonant diodes coupled to the at least one first conductor; at least one second conductor coupled to the plurality of diodes; and a plurality of substantially spherical lenses suspended in a polymer attached or deposited over the diodes. The lenses and the suspending polymer have different indices of refraction. In some embodiments, the lenses and diodes have a ratio of mean diameters or lengths between about 10:1 and 2:1. The diodes may be LEDs or photovoltaic diodes, and in some embodiments, have a junction formed at least partially as a hemispherical shell or cap.

  18. Light Emitting, Photovoltaic or Other Electronic Apparatus and System

    NASA Technical Reports Server (NTRS)

    Ray, William Johnstone (Inventor); Lowenthal, Mark D. (Inventor); Shotton, Neil O. (Inventor); Blanchard, Richard A. (Inventor); Lewandowski, Mark Allan (Inventor); Fuller, Kirk A. (Inventor); Frazier, Donald Odell (Inventor)

    2016-01-01

    The present invention provides an electronic apparatus, such as a lighting device comprised of light emitting diodes (LEDs) or a power generating apparatus comprising photovoltaic diodes, which may be created through a printing process, using a semiconductor or other substrate particle ink or suspension and using a lens particle ink or suspension. An exemplary apparatus comprises a base; at least one first conductor; a plurality of substantially spherical or optically resonant diodes coupled to the at least one first conductor; at least one second conductor coupled to the plurality of diodes; and a plurality of substantially spherical lenses suspended in a polymer attached or deposited over the diodes. The lenses and the suspending polymer have different indices of refraction. In some embodiments, the lenses and diodes have a ratio of mean diameters or lengths between about 10:1 and 2:1. The diodes may be LEDs or photovoltaic diodes, and in some embodiments, have a junction formed at least partially as a hemispherical shell or cap.

  19. Measured Off-Grid LED Lighting System Performance

    SciTech Connect

    Granderson, Jessica; Galvin, James; Bolotov, Dmitriy; Clear, Robert; Jacobson, Arne; Mills, Evan

    2008-12-18

    This report is a product of our ongoing effort to support the development of high-quality yet affordable products for off-grid lighting in the developing world that have good potential to succeed in the market. The effort includes work to develop low-cost testing procedures, to identify useful performance metrics, and to facilitate the development of industry standards and product rating protocols. We conducted laboratory testing of nine distinct product lines. In some cases we also tested multiple generations of a single product line and/or operating modes for a product. The resultsare summarized in Table 1. We found that power consumption and light output varied by nearly a factor of 12, with efficacy varying by a factor of more than six. Of particular note, overall luminous efficacy varied from 8.2 to 53.1 lumens per watt. Color quality indices variedmaterially, especially for correlated color temperature. Maximum illuminance, beamcandlepower, and luminance varied by 8x, 32x, and 61x respectively, suggesting considerable differences among products in terms of service levels and visual comfort. Glare varied by1.4x, and was above acceptable thresholds in most cases. Optical losses play a role in overall performance, varying by a factor of 3.2 and ranging as high as 24percent. These findings collectively indicate considerable potential for improved product design.

  20. Light emitting, photovoltaic or other electronic apparatus and system

    NASA Technical Reports Server (NTRS)

    Ray, William Johnstone (Inventor); Lowenthal, Mark D. (Inventor); Shotton, Neil O. (Inventor); Blanchard, Richard A. (Inventor); Lewandowski, Mark Allan (Inventor); Fuller, Kirk A. (Inventor); Frazier, Donald Odell (Inventor)

    2013-01-01

    The present invention provides an electronic apparatus, such as a lighting device comprised of light emitting diodes (LEDs) or a power generating apparatus comprising photovoltaic diodes, which may be created through a printing process, using a semiconductor or other substrate particle ink or suspension and using a lens particle ink or suspension. An exemplary apparatus comprises a base; at least one first conductor; a plurality of diodes coupled to the at least one first conductor; at least one second conductor coupled to the plurality of diodes; and a plurality of lenses suspended in a polymer deposited or attached over the diodes. The lenses and the suspending polymer have different indices of refraction. In some embodiments, the lenses and diodes are substantially spherical, and have a ratio of mean diameters or lengths between about 10:1 and 2:1. The diodes may be LEDs or photovoltaic diodes, and in some embodiments, have a junction formed at least partially as a hemispherical shell or cap.

  1. Selective mapping and restorable clipping joint scheme for light-emitting diode nonlinearity alleviation in visible light communication system

    NASA Astrophysics Data System (ADS)

    Yan, Chaowen; Wang, Jianping; Lu, Huimin; Shi, Yinjia; Zhang, Yini

    2016-05-01

    A joint algorithm, integrating selective mapping (SLM) and restorable clipping (RC), is proposed for the direct current-biased optical orthogonal frequency division multiplexing (DCO-OFDM) and visible light communication (VLC) system to reduce the nonlinearity impacts of light-emitting diode (LED) aggravated by high peak-to-average power ratio (PAPR) and DC-bias. The performance of DCO-OFDM VLC system is analyzed and discussed with different techniques of LED nonlinearity alleviation. The simulation results show that compared to the original DCO-OFDM VLC system, the system with the proposed scheme can achieve about 4.8 dB improvement of PAPR reduction and 7 dB improvement of bit error rate (BER) performance. The reason is that the signals acquiring the desired shape in LED linear region can be recovered correctly without distortion induced by LED nonlinearity. It is demonstrated that the proposed SLM-RC technique effectively reduces not only PAPR but also the impacts of LED nonlinearity without BER deterioration.

  2. Selective mapping and restorable clipping joint scheme for light-emitting diode nonlinearity alleviation in visible light communication system

    NASA Astrophysics Data System (ADS)

    Yan, Chaowen; Wang, Jianping; Lu, Huimin; Shi, Yinjia; Zhang, Yini

    2016-05-01

    A joint algorithm, integrating selective mapping (SLM) and restorable clipping (RC), is proposed for the direct current-biased optical orthogonal frequency division multiplexing (DCO-OFDM) and visible light communication (VLC) system to reduce the nonlinearity impacts of light-emitting diode (LED) aggravated by high peak-to-average power ratio (PAPR) and DC-bias. The performance of DCO-OFDM VLC system is analyzed and discussed with different techniques of LED nonlinearity alleviation. The simulation results show that compared to the original DCO-OFDM VLC system, the system with the proposed scheme can achieve about 4.8 dB improvement of PAPR reduction and 7 dB improvement of bit error rate (BER) performance. The reason is that the signals acquiring the desired shape in LED linear region can be recovered correctly without distortion induced by LED nonlinearity. It is demonstrated that the proposed SLM-RC technique effectively reduces not only PAPR but also the impacts of LED nonlinearity without BER deterioration.

  3. An augmented reality binocular system (ARBS) for air traffic controllers

    NASA Astrophysics Data System (ADS)

    Fulbrook, Jim E.; Ruffner, John W.; Labbe, Roger

    2008-04-01

    The primary means by which air traffic tower controllers obtain information is through direct out-thewindow viewing, although a considerable amount of time is spent looking at electronic displays and other information sources inside the tower cab. The Air Force Research Laboratory sponsored the development of a prototype Augmented Reality Binocular System (ARBS) that enhances tower controller performance, situation awareness, and safety. The ARBS is composed of a virtual binocular (VB) that displays real-time imagery from high resolution telephoto cameras and sensors mounted on pan/tilt units (PTUs). The selected PTU tracks to the movement of the VB, which has an inertial heading and elevation sensor. Relevant airfield situation text and graphic depictions that identify airfield features are overlaid on the imagery. In addition, the display is capable of labeling and tracking vehicles on which an Automatic Dependent Surveillance - Broadcast (ADS-B) system has been installed. The ARBS provides air traffic controllers and airfield security forces with the capability to orient toward, observe, and conduct continuous airfield operations and surveillance/security missions from any number of viewing aspects in limited visibility conditions. In this paper, we describe the ARBS in detail, discuss the results of a Usability Test of the prototype ARBS, and discuss ideas for follow-on efforts to develop the ARBS to a fieldable level.

  4. Simulation of multicomponent light source for optical-electronic system of color analysis objects

    NASA Astrophysics Data System (ADS)

    Peretiagin, Vladimir S.; Alekhin, Artem A.; Korotaev, Valery V.

    2016-04-01

    Development of lighting technology has led to possibility of using LEDs in the specialized devices for outdoor, industrial (decorative and accent) and domestic lighting. In addition, LEDs and devices based on them are widely used for solving particular problems. For example, the LED devices are widely used for lighting of vegetables and fruit (for their sorting or growing), textile products (for the control of its quality), minerals (for their sorting), etc. Causes of active introduction LED technology in different systems, including optical-electronic devices and systems, are a large choice of emission color and LED structure, that defines the spatial, power, thermal and other parameters. Furthermore, multi-element and color devices of lighting with adjustable illumination properties can be designed and implemented by using LEDs. However, devices based on LEDs require more attention if you want to provide a certain nature of the energy or color distribution at all the work area (area of analysis or observation) or surface of the object. This paper is proposed a method of theoretical modeling of the lighting devices. The authors present the models of RGB multicomponent light source applied to optical-electronic system for the color analysis of mineral objects. The possibility of formation the uniform and homogeneous on energy and color illumination of the work area for this system is presented. Also authors showed how parameters and characteristics of optical radiation receiver (by optical-electronic system) affect on the energy, spatial, spectral and colorimetric properties of a multicomponent light source.

  5. Visible light responsive systems based on metastable-state photoacids

    NASA Astrophysics Data System (ADS)

    Liao, Yi

    2015-09-01

    Proton transfer is one of the most fundamental processes in nature. Metastable-state photoacids can reversibly generate a large proton concentration under visible light with moderate intensity. which provides a general approach to control various proton transfer processes. Several applications of mPAHs have been demonstrated recently including control of acid-catalyzed reactions, volume-change of hydrogels, polymer conductivity, bacteria killing, odorant release, and color change of materials. They have also been utilized to control supramolecular assemblies, molecular switches, microbial fuel cells and cationic sensors. In this talk, the mechanism, structure design, and applications of metastable-state photoacids are introduced. Recent development of different types of metastable-state photoacids is presented. Challenges and future work are also discussed.

  6. Light path indication system for route guidance in public facilities

    NASA Astrophysics Data System (ADS)

    Fukuda, Hiroyuki; Sakamoto, Kunio

    2008-03-01

    The authors developed a prototype indication display system for route guidance. We suppose that this system is set up in the public facilities especially a library. A city public library has a collection of many books. It is difficult for a visitor to find the desired book from many books. But we can recently use a library search system for inquiring the whereabouts of a book. The search system outputs a receipt which shows the search result. The destination is shown in this receipt. Though the visitor carries about the receipt during the treasure hunting, that receipt will be a trash after the arrival at his/her destination. The motivation of this research is to build the paperless whereabouts guide system. The guidance system using an electronic display would be possible to provide us with route information to the desired book.

  7. Membrane systems for energy efficient separation of light gases

    SciTech Connect

    Devlin, D.J.; Archuleta, T.; Barbero, R.

    1997-04-01

    Ethylene and propylene are two of the largest commodity chemicals in the United States and are major building blocks for the petrochemicals industry. These olefins are separated currently by cryogenic distillation which demands extremely low temperatures and high pressures. Over 75 billion pounds of ethylene and propylene are distilled annually in the US at an estimated energy requirement of 400 trillion BTU`s. Non-domestic olefin producers are rapidly constructing state-of-the-art plants. These energy-efficient plants are competing with an aging United States olefins industry in which 75% of the olefins producers are practicing technology that is over twenty years old. New separation opportunities are therefore needed to continually reduce energy consumption and remain competitive. Amoco has been a leader in incorporating new separation technology into its olefins facilities and has been aggressively pursuing non-cryogenic alternatives to light gas separations. The largest area for energy reduction is the cryogenic isolation of the product hydrocarbons from the reaction by-products, methane and hydrogen. This separation requires temperatures as low as {minus}150{degrees}F and pressures exceeding 450 psig. This CRADA will focus on developing a capillary condensation process to separate olefinic mixtures from light gas byproducts at temperatures that approach ambient conditions and at pressures less than 250 psig; this technology breakthrough will result in substantial energy savings. The key technical hurdle in the development of this novel separation concept is the precise control of the pore structure of membrane materials. These materials must contain specially-shaped channels in the 20-40A range to provide the driving force necessary to remove the condensed hydrocarbon products. In this project, Amoco is the technology end-user and provides the commercialization opportunity and engineering support.

  8. Fiber optic light-scattering measurement system for evaluation of embryo viability: light-scattering characteristics from live mouse embryo

    NASA Astrophysics Data System (ADS)

    Itoh, Harumi; Arai, Tsunenori; Kikuchi, Makoto

    1997-06-01

    We measured angular distribution of the light scattering from live mouse embryo with 632.8nm in wavelength to evaluate the embryo viability. We aim to measure the mitochondrial density in human embryo which have relation to the embryo viability. We have constructed the light scattering measurement system to detect the mitochondrial density non-invasively. We have employed two optical fibers for the illumination and sensing to change the angle between these fibers. There were two dips on the scattering angular distribution from the embryo. These dips existed on 30 and 85 deg. We calculated the scattering angular pattern by Mie theory to fit the measured scattering estimated scattering size and density. The best fitting was obtained when the particle size and density were 0.9 micrometers and 1010 particles per ml, respectively. These values coincided with the approximated values of mitochondrial in the embryo. The measured light scattering may mainly originated from mitochondria in spite of the existence of the various scattering particles in the embryo. Since our simple scattering measurement may offer the mitochondrial density in the embryo, it might become the practical method of human embryo on in vitro fertilization-embryo transfer.

  9. Calibration of a wide-field frequency-domain fluorescence lifetime microscopy system using light emitting diodes as light sources.

    PubMed

    Elder, A D; Frank, J H; Swartling, J; Dai, X; Kaminski, C F

    2006-11-01

    High brightness light emitting diodes are an inexpensive and versatile light source for wide-field frequency-domain fluorescence lifetime imaging microscopy. In this paper a full calibration of an LED based fluorescence lifetime imaging microscopy system is presented for the first time. A radio-frequency generator was used for simultaneous modulation of light emitting diode (LED) intensity and the gain of an intensified charge coupled device (CCD) camera. A homodyne detection scheme was employed to measure the demodulation and phase shift of the emitted fluorescence, from which phase and modulation lifetimes were determined at each image pixel. The system was characterized both in terms of its sensitivity to measure short lifetimes (500 ps to 4 ns), and its capability to distinguish image features with small lifetime differences. Calibration measurements were performed in quenched solutions containing Rhodamine 6G dye and the results compared to several independent measurements performed with other measurement methodologies, including time correlated single photon counting, time gated detection, and acousto optical modulator (AOM) based modulation of excitation sources. Results are presented from measurements and simulations. The effects of limited signal-to-noise ratios, baseline drifts and calibration errors are discussed in detail. The implications of limited modulation bandwidth of high brightness, large area LED devices ( approximately 40 MHz for devices used here) are presented. The results show that phase lifetime measurements are robust down to sub ns levels, whereas modulation lifetimes are prone to errors even at large signal-to-noise ratios. Strategies for optimizing measurement fidelity are discussed. Application of the fluorescence lifetime imaging microscopy system is illustrated with examples from studies of molecular mixing in microfluidic devices and targeted drug delivery research. PMID:17204064

  10. Evaluation techniques for x-ray mirrors and systems using visible light

    SciTech Connect

    Takacs, P.Z.; Colbert, J.

    1985-09-01

    Severely diffraction-broadened visible light images from grazing incidence optical systems are measured and analyzed using a diffraction integral model to predict slope errors and image quality at XUV wavelengths.

  11. Self-Assembled PDINH Supramolecular System for Photocatalysis under Visible Light.

    PubMed

    Liu, Di; Wang, Jun; Bai, Xiaojuan; Zong, Ruilong; Zhu, Yongfa

    2016-09-01

    A self-assembled perylene-3,4,9,10-tetracarboxylic diimide(PDINH) supramolecular system consisting of all-organic PDINH molecule building blocks through non-covalent interactions works as a visible light photocatalyst with high activity.

  12. Gust alleviation system to improve ride comfort of light airplanes

    NASA Technical Reports Server (NTRS)

    Stewart, E. C.; Phillips, W. H.; Hewes, D. E.

    1975-01-01

    System consists of movable auxiliary aerodynamic sensors mounted on fuselage and connected to trailing-edge flaps by rigid mechanical linkages. System achieves alleviation by reducing lift-curve slope of airplane to such a small value that gust-induced angles of attack will result in small changes in lift.

  13. Light Duty.

    ERIC Educational Resources Information Center

    Rogers, Jeff

    1996-01-01

    Discusses multipurpose athletic-field lighting specifications to enhance lighting quality and reduce costs. Topics discussed include lamp choice, lighting spillover and glare prevention, luminary assemblies and poles, and the electrical dimming and switching systems. (GR)

  14. Discussion of an aeromechanical gust alleviation system to improve the ride comfort of light airplanes

    NASA Technical Reports Server (NTRS)

    Stewart, E. C.

    1975-01-01

    A discussion of an on-going NASA research project of a gust alleviation system to improve the ride comfort of a light airplane is presented. The discussion includes a description of the proposed system which uses auxiliary aerodynamic surfaces to drive the trailing-edge flaps. The results of analytical work on the effects of the system on stability and effectiveness of the system are presented. Static wind-tunnel tests of the system installed in a 1/6-scale model of a popular light airplane are also described. Problem areas which may need future investigation are discussed.

  15. Can pulsed xenon ultraviolet light systems disinfect aerobic bacteria in the absence of manual disinfection?

    PubMed

    Jinadatha, Chetan; Villamaria, Frank C; Ganachari-Mallappa, Nagaraja; Brown, Donna S; Liao, I-Chia; Stock, Eileen M; Copeland, Laurel A; Zeber, John E

    2015-04-01

    Whereas pulsed xenon-based ultraviolet light no-touch disinfection systems are being increasingly used for room disinfection after patient discharge with manual cleaning, their effectiveness in the absence of manual disinfection has not been previously evaluated. Our study indicates that pulsed xenon-based ultraviolet light systems effectively reduce aerobic bacteria in the absence of manual disinfection. These data are important for hospitals planning to adopt this technology as adjunct to routine manual disinfection.

  16. First-generation hybrid solar lighting collector system development and operating experience

    NASA Astrophysics Data System (ADS)

    Beshears, David; Earl, D. D.; Muhs, Jeff; Maxey, L. Curt; Capps, Gary; Stellern, Scott; Bayless, David; Switzer, Shyler

    2004-01-01

    Research is underway at Oak Ridge National Laboratory (ORNL) that could lead to entirely new, highly energy-efficient ways of lighting buildings using the power of sunlight. In addition to providing light, the hybrid lighting system will convert sunlight to electricity much more efficiently than conventional solar technologies using thermo-photovoltaic cells. In commercial buildings today, lighting consumes more electric energy than any other building end-use. It accounts for more than a third of all electricity consumed for commercial use in the United States. Typically, less than 25% of that energy actually produces light; the rest generates heat that increases the need for air-conditioning. ORNL is developing a system to reduce the energy required for lighting and the air-conditioning loads associated with it, while generating power for other uses. The system uses roof-mounted concentrators to collect and separate the visible and infrared portions of sunlight. The visible portion is distributed through large-diameter optical fibers to hybrid luminaires. (Hybrid luminaires are lighting fixtures that contain both electric lamps and fiber optics for direct sunlight distribution.) When sunlight is plentiful, the fiber optics in the luminaries, provide all or most of the light needed in an area. Unlike conventional electric lamps, they produce little heat. During times of little or no sunlight, sensor-controlled electric lamps will operate to maintain the desired illumination level. A second use of the hybrid lighting collector system is to provide sunlight for enhanced practical photosynthesis carbon dioxide mitigation. In this project the hybrid lighting collector system is being used to provide sunlight to a lab-scale photobioreactor for growing algae that is being used for CO2 mitigation. The end goal of this project is to provide a photobioreactor that can be used to mitigate CO2 in fossil fuel fire power plants. This paper will discuss the development and

  17. Generalized propagation of light through optical systems. II. Numerical implications.

    PubMed

    Tessmer, Manuel; Gross, Herbert

    2015-12-01

    We present an algorithm implemented in a MATLAB toolbox that is able to compute the wave propagation of coherent visible light through macroscopic lenses. The mathematical operations that complete the status at the end of the first paper of this sequence, where only limited configurations of the propagation direction were allowed toward arbitrarily directed input beam computations, are provided. With their help, high numerical aperture (NA) field tracing is made possible that is based on fast Fourier routines and is Maxwell exact in the limit of macroscopic structures and large curvature radii, including reflection and transmission. Whereas the curvature-dependent terms in the Helmholtz equation are under analytical control through the first perturbation order in the curvature, they are only included in the propagation distance in the current investigation for the sake of reasonable time consumption. We give a number of examples that demonstrate the strengths of our approach, describe essential differences from other approaches that were not obvious when Paper 1 was written, and list a number of drawbacks and possible simplifications to overcome them.

  18. Generalized propagation of light through optical systems. II. Numerical implications.

    PubMed

    Tessmer, Manuel; Gross, Herbert

    2015-12-01

    We present an algorithm implemented in a MATLAB toolbox that is able to compute the wave propagation of coherent visible light through macroscopic lenses. The mathematical operations that complete the status at the end of the first paper of this sequence, where only limited configurations of the propagation direction were allowed toward arbitrarily directed input beam computations, are provided. With their help, high numerical aperture (NA) field tracing is made possible that is based on fast Fourier routines and is Maxwell exact in the limit of macroscopic structures and large curvature radii, including reflection and transmission. Whereas the curvature-dependent terms in the Helmholtz equation are under analytical control through the first perturbation order in the curvature, they are only included in the propagation distance in the current investigation for the sake of reasonable time consumption. We give a number of examples that demonstrate the strengths of our approach, describe essential differences from other approaches that were not obvious when Paper 1 was written, and list a number of drawbacks and possible simplifications to overcome them. PMID:26831382

  19. Office worker response to an automated venetian blind and electric lighting system: A pilot study

    SciTech Connect

    Vine, E.; Lee, E.; Clear, R.; DiBartolomeo, D.; Selkowitz, S.

    1998-03-01

    A prototype integrated, dynamic building envelope and lighting system designed to optimize daylight admission and solar heat gain rejection on a real-time basis in a commercial office building is evaluated. Office worker response to the system and occupant-based modifications to the control system are investigated to determine if the design and operation of the prototype system can be improved. Key findings from the study are: (1) the prototype integrated envelope and lighting system is ready for field testing, (2) most office workers (N=14) were satisfied with the system, and (3) there were few complaints. Additional studies are needed to explain how illuminance distribution, lighting quality, and room design can affect workplans illuminance preferences.

  20. 78 FR 64029 - Cost-Benefit Analysis for Radwaste Systems for Light-Water-Cooled Nuclear Power Reactors

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-25

    ... COMMISSION Cost-Benefit Analysis for Radwaste Systems for Light-Water-Cooled Nuclear Power Reactors AGENCY... Systems for Light-Water-Cooled Nuclear Power Reactors,'' in which the NRC made editorial corrections and... analysis for liquid and gaseous radwaste system components for light water nuclear power...

  1. Hydrogeolgy and Ground-Water-Flow Simulation in the Former Airfield Area of Naval Support Activity Mid-South, Millington, Tennessee

    USGS Publications Warehouse

    Haugh, Connor J.; Carmichael, John K.; Ladd, David E.

    2004-01-01

    Naval Support Activity Mid-South is a Department of the Navy base located in Millington, Tennessee. The facility was home to the Naval Aviation Technical Training Center from 1943 until 1996. As part of the Base Closure and Realignment Act of 1990, the primary training mission of the facility was realigned and most of the northern part of the base, referred to as the Northside and consisting primarily of an airfield, was transferred to the city of Millington in January 2000. During environmental investigations at the base, plumes of dissolved chlorinated solvents resulting from past aircraft maintenance and training operations were identified in shallow ground water beneath the airfield area. The airfield area containing the plumes has been designated as Area of Concern (AOC) A. Chlorinated solvents, primarily trichloroethene (TCE), are the principal contaminants in ground water at AOC A, with TCE identified in concentrations as high as 4,400 micrograms per liter. The nature and extent of these plumes at AOC A were addressed during a Resource Conservation and Recovery Act Facility Investigation, and selected options for remediation currently are being implemented under a corrective action program. As part of these efforts, the U.S. Geological Survey (USGS) is working with the Navy and its consultants to study the hydrogeologic framework of the base and surrounding area, with a focus on AOC A. Since 1997, investigations at and near the facility have produced data prompting revisions and additions to information published that year in two USGS reports. The updates are presented in this report and consist primarily of (1) refinements to selected hydrogeologic maps presented in the 1997 reports, on the basis of data collected from new wells at on- and off-base locations, (2) additional hydraulic-conductivity data collected for the alluvial-fluvial deposits aquifer at AOC A, and (3) construction of a potentiometric-surface map of the shallow aquifer for the former part

  2. Recognition of Banknote Fitness Based on a Fuzzy System Using Visible Light Reflection and Near-infrared Light Transmission Images.

    PubMed

    Kwon, Seung Yong; Pham, Tuyen Danh; Park, Kang Ryoung; Jeong, Dae Sik; Yoon, Sungsoo

    2016-01-01

    Fitness classification is a technique to assess the quality of banknotes in order to determine whether they are usable. Banknote classification techniques are useful in preventing problems that arise from the circulation of substandard banknotes (such as recognition failures, or bill jams in automated teller machines (ATMs) or bank counting machines). By and large, fitness classification continues to be carried out by humans, and this can cause the problem of varying fitness classifications for the same bill by different evaluators, and requires a lot of time. To address these problems, this study proposes a fuzzy system-based method that can reduce the processing time needed for fitness classification, and can determine the fitness of banknotes through an objective, systematic method rather than subjective judgment. Our algorithm was an implementation to actual banknote counting machine. Based on the results of tests on 3856 banknotes in United States currency (USD), 3956 in Korean currency (KRW), and 2300 banknotes in Indian currency (INR) using visible light reflection (VR) and near-infrared light transmission (NIRT) imaging, the proposed method was found to yield higher accuracy than prevalent banknote fitness classification methods. Moreover, it was confirmed that the proposed algorithm can operate in real time, not only in a normal PC environment, but also in an embedded system environment of a banknote counting machine. PMID:27294940

  3. Recognition of Banknote Fitness Based on a Fuzzy System Using Visible Light Reflection and Near-infrared Light Transmission Images.

    PubMed

    Kwon, Seung Yong; Pham, Tuyen Danh; Park, Kang Ryoung; Jeong, Dae Sik; Yoon, Sungsoo

    2016-06-11

    Fitness classification is a technique to assess the quality of banknotes in order to determine whether they are usable. Banknote classification techniques are useful in preventing problems that arise from the circulation of substandard banknotes (such as recognition failures, or bill jams in automated teller machines (ATMs) or bank counting machines). By and large, fitness classification continues to be carried out by humans, and this can cause the problem of varying fitness classifications for the same bill by different evaluators, and requires a lot of time. To address these problems, this study proposes a fuzzy system-based method that can reduce the processing time needed for fitness classification, and can determine the fitness of banknotes through an objective, systematic method rather than subjective judgment. Our algorithm was an implementation to actual banknote counting machine. Based on the results of tests on 3856 banknotes in United States currency (USD), 3956 in Korean currency (KRW), and 2300 banknotes in Indian currency (INR) using visible light reflection (VR) and near-infrared light transmission (NIRT) imaging, the proposed method was found to yield higher accuracy than prevalent banknote fitness classification methods. Moreover, it was confirmed that the proposed algorithm can operate in real time, not only in a normal PC environment, but also in an embedded system environment of a banknote counting machine.

  4. Recognition of Banknote Fitness Based on a Fuzzy System Using Visible Light Reflection and Near-infrared Light Transmission Images

    PubMed Central

    Kwon, Seung Yong; Pham, Tuyen Danh; Park, Kang Ryoung; Jeong, Dae Sik; Yoon, Sungsoo

    2016-01-01

    Fitness classification is a technique to assess the quality of banknotes in order to determine whether they are usable. Banknote classification techniques are useful in preventing problems that arise from the circulation of substandard banknotes (such as recognition failures, or bill jams in automated teller machines (ATMs) or bank counting machines). By and large, fitness classification continues to be carried out by humans, and this can cause the problem of varying fitness classifications for the same bill by different evaluators, and requires a lot of time. To address these problems, this study proposes a fuzzy system-based method that can reduce the processing time needed for fitness classification, and can determine the fitness of banknotes through an objective, systematic method rather than subjective judgment. Our algorithm was an implementation to actual banknote counting machine. Based on the results of tests on 3856 banknotes in United States currency (USD), 3956 in Korean currency (KRW), and 2300 banknotes in Indian currency (INR) using visible light reflection (VR) and near-infrared light transmission (NIRT) imaging, the proposed method was found to yield higher accuracy than prevalent banknote fitness classification methods. Moreover, it was confirmed that the proposed algorithm can operate in real time, not only in a normal PC environment, but also in an embedded system environment of a banknote counting machine. PMID:27294940

  5. Stray light analysis of the Apache Point Observatory 3.5-meter telescope system

    NASA Astrophysics Data System (ADS)

    Pompea, Stephen M.; Pfisterer, Richard N.; Morgan, Jeffrey S.

    2003-02-01

    A stray light analysis of the Apache Point Observatory 3.5 meter telescope system was done to understand the performance for a variety of imaging modes. The telescope system consists of the 3.5-m telescope, its enclosure, and its associated imaging cameras. The purpose of the study was to assess the stray light performance of this system, identify where modification(s) would improve the system off-axis rejection characteristics, and assess the effectiveness of those modifications. A detailed telescope system geometry model was created, and scatter models were created for telescope and enclosure components. The computer model we created duplicated the pinhole stray light images taken with the telescope, thereby verifying the model. The Point Source Transmittance (PST), a commonly used metric for assessing stray light was used to evaluate the stray light performance of the system for a number of off-axis angles and to suggest modifications to enhance the system. The baseline PST of the existing system shows virtually no falloff with off-axis angle in the plane of the observatory slit. This is the result of (1) the focal plane having a large, unobstructed view of the Nasmyth mirror and cell, primary mirror cell, and baffles mounted on the Nasmyth cell, (2) relatively unobstructed illumination of telescope over a large range of angles in the plane of the slit, and (3) secondary and Nasmyth baffles that are not enclosed. These attributes create a series of first-level scatter paths that directly illuminate the focal plane. Our approach to stray light reduction was to address the light paths revealed by the various PST calculations. Our calculations have shown that significant gains can be realized with simple modifications to the telescope system.

  6. Robust quantum correlations in out-of-equilibrium matter-light systems

    NASA Astrophysics Data System (ADS)

    Acevedo, O. L.; Quiroga, L.; Rodríguez, F. J.; Johnson, N. F.

    2015-09-01

    High precision macroscopic quantum control in interacting light-matter systems remains a significant goal toward novel information processing and ultra-precise metrology. We show that the out-of-equilibrium behavior of a paradigmatic light-matter system (Dicke model) reveals two successive stages of enhanced quantum correlations beyond the traditional schemes of near-adiabatic and sudden quenches. The first stage features magnification of matter-only and light-only entanglement and squeezing due to effective nonlinear self-interactions. The second stage results from a highly entangled light-matter state, with enhanced superradiance and signatures of chaotic and highly quantum states. We show that these new effects scale up consistently with matter system size, and are reliable even in dissipative environments.

  7. Demonstration of a light-redirecting skylight system at the Palm Springs Chamber of Commerce

    SciTech Connect

    Lee, E.S.; Beltran, L.O.; Selkowitz, S.E.; Lau, H.; Ander, G.D.

    1996-05-01

    As part of a demonstration project to provide a comprehensive energy upgrade to a 294 m{sup 2} (3168 ft{sup 2}) commercial building, an advanced skylight design was developed using optical light control materials and geometry to provide daylight to two adjoining offices. The skylight system was developed using outdoor physical model tests and simulation tools Limited on-site measurements and occupant polls were conducted. Market issues were addressed. The skylight systems were found to improve lighting quality and to control excessive daylight illuminance levels compared to a conventional diffusing bubble skylight. Daylighting principles developed in earlier work for vertical glazing systems (light shelves and light pipes) were shown to be applicable in skylight designs at full-scale.

  8. Optimization of optical systems for LED spot lights concerning the color uniformity

    NASA Astrophysics Data System (ADS)

    Teupner, Anne; Bergenek, Krister; Wirth, Ralph; Miñano, Juan C.; Benítez, Pablo

    2014-09-01

    Spotlighting is one illumination field where the application of light emitting diodes (LED) creates many advantages. Commonly, the system for spot lights consists of a LED light engine and collimating secondary optics. Through angular or spatial separated emitted light from the source and imaging optical elements, a non uniform far field appears with colored rings, dots or patterns. Many feasible combinations result in very different spatial color distributions. Several combinations of three multi-chip light sources and secondary optical elements like reflectors and TIR lenses with additional facets or scattering elements were analyzed mainly regarding the color uniformity. They are assessed by the merit function Usl which was derived from human factor experiments and describes the color uniformity based on the visual perception of humans. Furthermore, the optical systems are compared concerning efficiency, peak candela and aspect ratio. Both types of optics differ in the relation between the color uniformity level and other properties. A plain reflector with a slightly color mixing light source performs adequate. The results for the TIR lenses indicate that they need additional elements for good color mixing or blended light source. The most convenient system depends on the requirements of the application.

  9. Joint-transform correlator systems using deformable-mirror spatial light modulators

    NASA Technical Reports Server (NTRS)

    Florence, James M.

    1989-01-01

    Two joint-transform correlator systems based on deformable-mirror-device (DMD) spatial light modulators and CCD video cameras are described. The system designs provide for real-time correlation between video-formatted input scenes and stored reference images. The DMD light modulators are used exclusively for inputting data in the optical stages of these systems, and the CCD cameras are used to provide the critical square-law detection required in joint-transform achitectures. Experimental verification of the functionality of these DMD/CCD joint-transform systems is also presented.

  10. Optical 3D-coordinate measuring system using structured light

    NASA Astrophysics Data System (ADS)

    Schreiber, Wolfgang; Notni, Gunther; Kuehmstedt, Peter; Gerber, Joerg; Kowarschik, Richard M.

    1996-09-01

    The paper is aimed at the description of an optical shape measuring technique based on a consistent principle using fringe projection technique. We demonstrate a real 3D- coordinate measuring system where the sale of coordinates is given only by the illumination-structures. This method has the advantages that the aberration of the observing system and the depth-dependent imaging scale have no influence on the measuring accuracy and, moreover, the measurements are independent of the position of the camera with respect to the object under test. Furthermore, it is shown that the influence of specular effects of the surface on the measuring result can be eliminated. Moreover, we developed a very simple algorithm to calibrate the measuring system. The measuring examples show that a measuring accuracy of 10-4 (i.e. 10 micrometers ) within an object volume of 100 X 100 X 70 mm3 is achievable. Furthermore, it is demonstrated that the set of coordinate values can be processed in CNC- and CAD-systems.

  11. 10 CFR 434.401 - Electrical power and lighting systems.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ...-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Design Requirements-Electric Systems and Equipment § 434... motors of 1 hp or more shall meet these requirements: 401.2.1Efficiency. NEMA design A & B squirrel-cage... that shown in Table 401.2.1 or shall be classified as an “energy efficient motor” in accordance with...

  12. 10 CFR 434.401 - Electrical power and lighting systems.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Design Requirements-Electric Systems and Equipment § 434... motors of 1 hp or more shall meet these requirements: 401.2.1Efficiency. NEMA design A & B squirrel-cage... that shown in Table 401.2.1 or shall be classified as an “energy efficient motor” in accordance with...

  13. 10 CFR 434.401 - Electrical power and lighting systems.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ...-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Design Requirements-Electric Systems and Equipment § 434... motors of 1 hp or more shall meet these requirements: 401.2.1 Efficiency. NEMA design A & B squirrel-cage... that shown in Table 401.2.1 or shall be classified as an “energy efficient motor” in accordance with...

  14. 10 CFR 434.401 - Electrical power and lighting systems.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ...-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Design Requirements-Electric Systems and Equipment § 434... motors of 1 hp or more shall meet these requirements: 401.2.1Efficiency. NEMA design A & B squirrel-cage... that shown in Table 401.2.1 or shall be classified as an “energy efficient motor” in accordance with...

  15. Neutron economic reactivity control system for light water reactors

    DOEpatents

    Luce, Robert G.; McCoy, Daniel F.; Merriman, Floyd C.; Gregurech, Steve

    1989-01-01

    A neutron reactivity control system for a LWBR incorporating a stationary seed-blanket core arrangement. The core arrangement includes a plurality of contiguous hexagonal shaped regions. Each region has a central and a peripheral blanket area juxapositioned an annular seed area. The blanket areas contain thoria fuel rods while the annular seed area includes seed fuel rods and movable thoria shim control rods.

  16. Dynamic safety systems in U.S. light water reactors

    SciTech Connect

    Miller, D.W.; Adams, G.; Hajek, B.K.

    1995-12-31

    The use of dynamic rather than static logic in reactor safety function systems provides significant benefits in achieving a fail-safe design. Dynamic safety system (DSS) are based on such an approach that can be realized in hardware- and/or software-based products. AEA Technology has implemented a dynamic architecture in a number of systems licensed and used on commercial gas-cooled reactors, including those in Refs. 1, 2, and 3, where software elements are operationally verified by hardwired components. The principal software-based components in DSS are the trip algorithm computers (TACs) and vote algorithm computers (VACs). The TACs provide trip thresholds or trip requirements for individual plant variables or channels, The VACs provide voter requirements for groups of channels or plant variables as specified to initiate a trip condition. Continuous dynamic testing of instrument loops occurs by a programmed pattern of simulated trip/nontrip conditions, which exercise both software and hardware in the safety channel. The pattern recognition logic (PRL) is a hardware wired component programmed to maintain nontrip output only when this excepted time-dependent pattern is not changed. If a change occurs, as will happen if there is a plant trip condition or safety system failure - either hardware or software - then the PRL will initiate a trip condition. In summary, DSS provides for continuous dynamic testing of safety-related components and fail-safe operation. Through scenario testing of a DSS emulator on a boiling water reactor (BWR) plant training simulator it has been shown that DSS can provide a cost- effective safety system in BWR power plants. Experimental research has been completed that indicates the feasibility of extending DSS to include the plant nuclear instrumentation in the DSS test domain. This extension has the potential to decrease operating and maintenance (O&M) costs and improve fault diagnosis.

  17. Thermodynamics of bipartite systems: Application to light-matter interactions

    SciTech Connect

    Boukobza, E.; Tannor, D. J.

    2006-12-15

    Heat and work for quantum systems governed by dissipative master equations with a time-dependent driving field were introduced in the pioneering work of Alicki [J. Phys. A 12, L103 (1979)]. Alicki's work was in the Schroedinger picture; here we extend these definitions to the Heisenberg and interaction pictures. We show that, in order to avoid consistency problems, the full time derivatives in the definitions for heat flux and power (work flux) should be replaced by partial time derivatives. We also present an alternative approach to the partitioning of the energy flux which differs from that of Alicki in that the instantaneous interaction energy with the external field is not included directly. We then proceed to generalize Alicki's definition of power by replacing the original system and its external driving field with a larger, bipartite system, governed by a time-independent Hamiltonian. Using the definition of heat flux and the generalized definition of power, we derive the first law of thermodynamics in differential form, for both the full bipartite system and the partially traced subsystems. Although the second law (Clausius formulation) is satisfied for the full bipartite system, we find that in general there is no rigorous formulation of the second law for the partially traced subsystem unless certain additional requirements are met. Once these requirements are satisfied, however, both the Carnot and the Clausius formulations of the second law are satisfied. We illustrate this thermodynamic analysis on both the simple Jaynes-Cummings model and an extended dissipative Jaynes-Cummings model, which is a model for a quantum amplifier.

  18. A red light-controlled synthetic gene expression switch for plant systems.

    PubMed

    Müller, Konrad; Siegel, David; Rodriguez Jahnke, Fernando; Gerrer, Katrin; Wend, Sabrina; Decker, Eva L; Reski, Ralf; Weber, Wilfried; Zurbriggen, Matias D

    2014-07-01

    On command control of gene expression in time and space is required for the comprehensive analysis of key plant cellular processes. Even though some chemical inducible systems showing satisfactory induction features have been developed, they are inherently limited in terms of spatiotemporal resolution and may be associated with toxic effects. We describe here the first synthetic light-inducible system for the targeted control of gene expression in plants. For this purpose, we applied an interdisciplinary synthetic biology approach comprising mammalian and plant cell systems to customize and optimize a split transcription factor based on the plant photoreceptor phytochrome B and one of its interacting factors (PIF6). Implementation of the system in transient assays in tobacco protoplasts resulted in strong (95-fold) induction in red light (660 nm) and could be instantaneously returned to the OFF state by subsequent illumination with far-red light (740 nm). Capitalizing on this toggle switch-like characteristic, we demonstrate that the system can be kept in the OFF state in the presence of 740 nm-supplemented white light, opening up perspectives for future application of the system in whole plants. Finally we demonstrate the system's applicability in basic research, by the light-controlled tuning of auxin signalling networks in N. tabacum protoplasts, as well as its biotechnological potential for the chemical-inducer free production of therapeutic proteins in the moss P. patens.

  19. Design and research of the LED edge-lighting systems for displays

    NASA Astrophysics Data System (ADS)

    Romanova, G. E.; Tibeev, M. R.

    2016-04-01

    Currently, there is a tendency to minimize the lighting system of the displays of portable electronic devices. Various approaches are taken, including placing the lighting source on the edge of a display, which helps to decrease the size of the device significantly. However, edge lighting has some disadvantages, the most important of which being nonuniformity of illumination. Several methods can be applied to provide uniform illumination of displays with edge lighting. In the most modern displays, Brightness Enhancement Films (BEFs) are used together with the wedge lightguides. In the project, we consider systems for the edge lighting of relatively small displays approximately 20 x 30 mm. Only one LED with nearly lambertian spatial distribution was used in the system. The optical system consisted of a wedge lightguide and a reflective surface, the surface can be either smooth or structured (with array of certain structure). Various combinations of the wedge lightguides with the structured reflective surfaces were considered in the study, the designed variants were also compared to the systems with BEFs. The designed systems provide acceptable illuminance uniformity for the central display zone, with small dark zones on the display margins. As a result of its simple construction and the ease with which it can be manufactured, the developed system, which has only one LED source, has potential applications in situations where the requirements for illuminance uniformity are not very high, for instance, in indicator devices.

  20. Practical homeostasis lighting control system using sensor agent robots for office space

    NASA Astrophysics Data System (ADS)

    Tokiwa, Momoko; Mita, Akira

    2014-03-01

    The comfortable space can be changed by season, age, physical condition and the like. However, the current systems are not able to resolve them absolutely. This research proposes the Homeostasis lighting control system based on the mechanism of biotic homeostasis for making the algorithms of apparatus control. Homeostasis are kept by the interaction of the three systems, endocrine system, immune system, and nervous system[1]. By the gradual reaction in the endocrine system, body's protective response in the immune system, and the electrical reaction in the nerve system, we can keep the environments against variable changes. The new lighting control system utilizes this mechanism. Firstly, we focused on legibility and comfort in the office space to construct the control model learning from the endocrine and immune systems. The mechanism of the endocrine system is used for ambient lights in the space is used considering circadian rhythm for comfort. For the legibility, the immune system is used to control considering devices near the human depending on the distance between the human. Simulations and the demonstration were conducted to show the feasibility. Finally, the nerve system was intruded to enhance the system.

  1. A novel sensor system for 3D face scanning based on infrared coded light

    NASA Astrophysics Data System (ADS)

    Modrow, Daniel; Laloni, Claudio; Doemens, Guenter; Rigoll, Gerhard

    2008-02-01

    In this paper we present a novel sensor system for three-dimensional face scanning applications. Its operating principle is based on active triangulation with a color coded light approach. As it is implemented in the near infrared band, the used light is invisible for human perception. Though the proposed sensor is primarily designed for face scanning and biometric applications, its performance characteristics are beneficial for technical applications as well. The acquisition of 3d data is real-time capable, provides accurate and high resolution depthmaps and shows high robustness against ambient light. Hence most of the limiting factors of other sensors for 3d and face scanning applications are eliminated, such as blinding and annoying light patterns, motion constraints and highly restricted scenarios due to ambient light constraints.

  2. Integrated 3D macro-trapping and light-sheet imaging system

    NASA Astrophysics Data System (ADS)

    Yang, Zhengyi; Piksarv, Peeter; Ferrier, David E. K.; Gunn-Moore, Frank J.; Dholakia, Kishan

    2015-08-01

    Biological research requires high-speed and low-damage imaging techniques for live specimens in areas such as development study in embryos. Light sheet microscopy provides fast imaging speed whilst keeps the photo-damage and photo-blenching to minimum. Conventional sample embedding methods in light sheet imaging involves using agent such as agarose which potentially affects the behavior and the develop pattern of the specimens. Here we demonstrate integrating dual-beam trapping method into light sheet imaging system to confine and translate the specimen whilst light sheet images are taken. Tobacco plant cells as well as Spirobranchus lamarcki larva were trapped solely with optical force and sectional images were acquired. This now approach has the potential to extend the applications of light sheet imaging significantly.

  3. A comprehensive approach to integrated envelope and lighting systems for new commercial buildings

    SciTech Connect

    Lee, E.S.; Selkowitz, S.E.; Rubinstein, F.M.; Klems, J.H.; Beltran, L.O.; DiBartolomeo, D.L.

    1994-05-01

    The authors define a comprehensive approach to integrated envelope and lighting systems design as one that balances energy efficiency with an equal regard to the resultant environmental quality. By integrating envelope components (glazing, shading, and daylighting), lighting components (fixtures and controls) and building HVAC/energy management control systems, they create building systems that have the potential to achieve significant decreases in electricity consumption and peak demand while satisfying occupant physiological and psychological concerns. This paper presents results on the development, implementation, and demonstration of two specific integrated envelope and lighting systems: (1) a system emphasizing dynamic envelope components and responsive electric lighting systems, that offer the potential to achieve energy efficiency goals and a near optimum comfort environment throughout the year by adapting to meteorological conditions and occupant preferences in real time, and (2) perimeter daylighting systems that increase the depth of daylight penetration from sidelight windows and improves visual comfort with the use of a small inlet aperture. The energy performance of the systems was estimated using the DOE-2 building energy simulation program. Field tests with reduced scale models were conducted to determine daylighting and thermal performance in real time under actual weather conditions. Demonstrations of these integrated systems are being planned or are in progress in collaboration with utility programs to resolve real-world implementation issues under complex site, building, and cost constraints. Results indicate that integrated systems offer solutions that not only achieve significant peak demand reductions but also realize consistent energy savings with added occupant comfort and satisfaction.

  4. Controlling of grid connected photovoltaic lighting system with fuzzy logic

    SciTech Connect

    Saglam, Safak; Ekren, Nazmi; Erdal, Hasan

    2010-02-15

    In this study, DC electrical energy produced by photovoltaic panels is converted to AC electrical energy and an indoor area is illuminated using this energy. System is controlled by fuzzy logic algorithm controller designed with 16 rules. Energy is supplied from accumulator which is charged by photovoltaic panels if its energy would be sufficient otherwise it is supplied from grid. During the 1-week usage period at the semester time, 1.968 kWh energy is used from grid but designed system used 0.542 kWh energy from photovoltaic panels at the experiments. Energy saving is determined by calculations and measurements for one education year period (9 months) 70.848 kWh. (author)

  5. Phosphor Systems for Illumination Quality Solid State Lighting Products

    SciTech Connect

    Setlur, Anant; Briel, Linda; Cleaver, Robert; Clothier, Brent; Gao, Yan; Harlow, Richard; Henderson, Claire; Heward, William; Hill, M Christine; Lyons, Robert; Murphy, James; Siclovan, Oltea; Stoklosa, Stan; Happek, Uwe; Aanegola, Srinath; Aesram, Danny; Deshpande, Anirudha; Jacob, Cherian; Kolodin, Boris; Stoklosa, Emil; Beers, Williams

    2010-03-31

    The objective of this program is to develop phosphor systems that will enable LED lamps with 96 lm/W efficacy at correlated color temperatures, (CCTs) ~3000 K, and color rendering indices (CRIs) >80 and 71 lm/W efficacy at CCT<3100 K and CRI~95 using phosphor downconversion of LEDs. This primarily involves the invention and development of new phosphor materials that have improved efficiency and better match the eye sensitivity curves.

  6. LED surgical lighting system with multiple free-form surfaces for highly sterile operating theater application.

    PubMed

    Liu, Peng; Zhang, Yaqin; Zheng, Zhenrong; Li, Haifeng; Liu, Xu

    2014-06-01

    Although the ventilation system is widely employed in the operating theater, a strictly sterile surgical environment still cannot be ensured because of laminar disturbance, which is mainly caused by the surgical lighting system. Abandoning traditional products, we propose an LED surgical lighting system, which can alleviate the laminar disturbance and provide an appropriate lighting condition for surgery. It contains a certain amount of LED lens units, which are embedded in the ceiling and arranged around the air supply smallpox. The LED lens unit integrated with an LED light source and a free-form lens is required to produce a uniform circular illumination with a large tolerance to the change of lighting distance. To achieve such a dedicated lens, two free-form refractive surfaces, which are converted into two ordinary differential equations by the design method presented in this paper, are used to deflect the rays. The results show that the LED surgical lighting system can provide an excellent illumination environment for surgery, and, apparently, the laminar disturbance also can be relieved.

  7. Developing a dynamic envelope/lighting control system with field measurements

    SciTech Connect

    DiBartolomeo, D.L.; Lee, E.S.; Rubinstein, F.M.; Selkowitz, S.E.

    1996-05-01

    The feasibility of an intelligent venetian blind/lighting control system was tested in a 1:3 scale model outdoors under variable sun and sky conditions. The control algorithm, block direct sun and meet the design workplane illuminance level, was implemented using commercially available and custom designed blind and lighting systems hardware. While blocking direct sunlight, the blinds were properly controlled to maintain the design workplane illuminance within a tolerance of -10%, +25% when there was sufficient daylight. When daylight levels alone were inadequate, the electric lighting control system maintained the design workplane illuminance. The electric lighting could be turned off if a user-specified time period at minimum power was exceeded. Lighting energy savings of 51-71% (southwest) and 37-75% (south) was attained for the period from 8:00 to 17:00 on clear sunny days, compared to a fixed, partially closed blind with the same lighting system. Practical details for implementation and commissioning are discussed. The impact of control variations, such as profile angle, time step interval, and control area, on energy demand is investigated.

  8. LED surgical lighting system with multiple free-form surfaces for highly sterile operating theater application.

    PubMed

    Liu, Peng; Zhang, Yaqin; Zheng, Zhenrong; Li, Haifeng; Liu, Xu

    2014-06-01

    Although the ventilation system is widely employed in the operating theater, a strictly sterile surgical environment still cannot be ensured because of laminar disturbance, which is mainly caused by the surgical lighting system. Abandoning traditional products, we propose an LED surgical lighting system, which can alleviate the laminar disturbance and provide an appropriate lighting condition for surgery. It contains a certain amount of LED lens units, which are embedded in the ceiling and arranged around the air supply smallpox. The LED lens unit integrated with an LED light source and a free-form lens is required to produce a uniform circular illumination with a large tolerance to the change of lighting distance. To achieve such a dedicated lens, two free-form refractive surfaces, which are converted into two ordinary differential equations by the design method presented in this paper, are used to deflect the rays. The results show that the LED surgical lighting system can provide an excellent illumination environment for surgery, and, apparently, the laminar disturbance also can be relieved. PMID:24922417

  9. Development of gamma-photon/Cerenkov-light hybrid system for simultaneous imaging of I-131 radionuclide

    NASA Astrophysics Data System (ADS)

    Yamamoto, Seiichi; Suzuki, Mayumi; Kato, Katsuhiko; Watabe, Tadashi; Ikeda, Hayato; Kanai, Yasukazu; Ogata, Yoshimune; Hatazawa, Jun

    2016-09-01

    Although iodine 131 (I-131) is used for radionuclide therapy, high resolution images are difficult to obtain with conventional gamma cameras because of the high energy of I-131 gamma photons (364 keV). Cerenkov-light imaging is a possible method for beta emitting radionuclides, and I-131 (606 MeV maximum beta energy) is a candidate to obtain high resolution images. We developed a high energy gamma camera system for I-131 radionuclide and combined it with a Cerenkov-light imaging system to form a gamma-photon/Cerenkov-light hybrid imaging system to compare the simultaneously measured images of these two modalities. The high energy gamma imaging detector used 0.85-mm×0.85-mm×10-mm thick GAGG scintillator pixels arranged in a 44×44 matrix with a 0.1-mm thick reflector and optical coupled to a Hamamatsu 2 in. square position sensitive photomultiplier tube (PSPMT: H12700 MOD). The gamma imaging detector was encased in a 2 cm thick tungsten shield, and a pinhole collimator was mounted on its top to form a gamma camera system. The Cerenkov-light imaging system was made of a high sensitivity cooled CCD camera. The Cerenkov-light imaging system was combined with the gamma camera using optical mirrors to image the same area of the subject. With this configuration, we simultaneously imaged the gamma photons and the Cerenkov-light from I-131 in the subjects. The spatial resolution and sensitivity of the gamma camera system for I-131 were respectively ~3 mm FWHM and ~10 cps/MBq for the high sensitivity collimator at 10 cm from the collimator surface. The spatial resolution of the Cerenkov-light imaging system was 0.64 mm FWHM at 10 cm from the system surface. Thyroid phantom and rat images were successfully obtained with the developed gamma-photon/Cerenkov-light hybrid imaging system, allowing direct comparison of these two modalities. Our developed gamma-photon/Cerenkov-light hybrid imaging system will be useful to evaluate the advantages and disadvantages of these two

  10. Light-front Ward-Takahashi identity for two-fermion systems

    SciTech Connect

    Marinho, J. A. O.; Frederico, T.; Pace, E.; Salme, G.; Sauer, P. U.

    2008-06-01

    We propose a three-dimensional electromagnetic current operator within light-front dynamics that satisfies a light-front Ward-Takahashi identity for two-fermion systems. The light-front current operator is obtained by a quasipotential reduction of the four-dimensional current operator and acts on the light-front valence component of bound or scattering states. A relation between the light-front valence wave function and the four-dimensional Bethe-Salpeter amplitude both for bound or scattering states is also derived, such that the matrix elements of the four-dimensional current operator can be fully recovered from the corresponding light-front ones. The light-front current operator can be perturbatively calculated through a quasipotential expansion, and the divergence of the proposed current satisfies a Ward-Takahashi identity at any given order of the expansion. In the quasipotential expansion the instantaneous terms of the fermion propagator are accounted for by the effective interaction and two-body currents. We exemplify our theoretical construction in the Yukawa model in the ladder approximation, investigating in detail the current operator at the lowest nontrivial order of the quasipotential expansion of the Bethe-Salpeter equation. The explicit realization of the light-front form of the Ward-Takahashi identity is verified. We also show the relevance of instantaneous terms and of the pair contribution to the two-body current and the Ward-Takahashi identity.

  11. Thermal design of retroreflective stray light fore-baffles for spaceborne optical systems

    NASA Astrophysics Data System (ADS)

    Schneider, Edward

    2001-03-01

    The use of stray light fore-baffles in space-borne optical systems solves the problem of protecting the optical system from unwanted radiation. However, this introduces the problem of adding a large area black cavity at the system entrance aperture, and this cavity will run hot due to capture of solar, planetary albedo, and planetary emission radiation. The optical system may need to be baffled by a cool shield to keep system absolute temperatures sufficiently low. Alternately, a reflecting baffle system can be used that retro-reflects the input environment radiation. This reduces absorbed heat loads by the baffle system and reduces system absolute temperature levels.

  12. Looking for light pseudoscalar bosons in the binary pulsar system J0737-3039.

    PubMed

    Dupays, Arnaud; Rizzo, Carlo; Roncadelli, Marco; Bignami, Giovanni F

    2005-11-18

    We present numerical calculations of the photon-light-pseudoscalar-boson (LPB) production in the recently discovered binary pulsar system J0737-3039. Light pseudoscalar bosons oscillate into photons in the presence of strong magnetic fields. In the context of this binary pulsar system, this phenomenon attenuates the light beam emitted by one of the pulsars, when the light ray goes through the magnetosphere of the companion pulsar. We show that such an effect is observable in the gamma-ray band since the binary pulsar is seen almost edge-on, depending on the values of the LPB mass and on the strength of its two-photon coupling. Our results are surprising in that they show a very sharp and significant (up to 50%) transition probability in the gamma-ray (> tens of MeV) domain. The observations can be performed by the upcoming NASA GLAST mission.

  13. Light and shadows of the Korean healthcare system.

    PubMed

    Moon, Tai Joon

    2012-05-01

    This article reviewed achievements and challenges of the National Health Insurance of the Republic of Korea and shared thoughts on its future directions. Starting with large workplaces of 500 or more employees in 1977, Korea's National Health Insurance successfully achieved universal coverage within just 12 yr in 1989. This amazing pace of growth was possible due to a positive combination of strong political will and rapid economic growth. Key features of Korea's experience in achieving universal coverage include 1) gradual expansion of coverage, 2) careful consideration to maintain sound insurance finances, and 3) introducing multiple health insurance societies (multiple payer system) at the initial stage. Introduction of the health insurance has dramatically improved Korea's health indicators and has fueled the rapid growth of basic medical infrastructure including medical institutions and professionals. On the other hand, the successful expansion was not free from side-effects. Although coverage has gradually expanded, benefits are still relatively low. The current situation warrants concern because coverage expansion is driven by welfare populism asserted by irresponsible political slogans and lacks a social consensus on basic principles and philosophy regarding the expansion. Concentration of patients to a few large prestigious hospitals as well as the inefficiencies resulting from a colossal single-payer system should also be pointed out. PMID:22661868

  14. Light and Shadows of the Korean Healthcare System

    PubMed Central

    2012-01-01

    This article reviewed achievements and challenges of the National Health Insurance of the Republic of Korea and shared thoughts on its future directions. Starting with large workplaces of 500 or more employees in 1977, Korea's National Health Insurance successfully achieved universal coverage within just 12 yr in 1989. This amazing pace of growth was possible due to a positive combination of strong political will and rapid economic growth. Key features of Korea's experience in achieving universal coverage include 1) gradual expansion of coverage, 2) careful consideration to maintain sound insurance finances, and 3) introducing multiple health insurance societies (multiple payer system) at the initial stage. Introduction of the health insurance has dramatically improved Korea's health indicators and has fueled the rapid growth of basic medical infrastructure including medical institutions and professionals. On the other hand, the successful expansion was not free from side-effects. Although coverage has gradually expanded, benefits are still relatively low. The current situation warrants concern because coverage expansion is driven by welfare populism asserted by irresponsible political slogans and lacks a social consensus on basic principles and philosophy regarding the expansion. Concentration of patients to a few large prestigious hospitals as well as the inefficiencies resulting from a colossal single-payer system should also be pointed out. PMID:22661868

  15. Foreword - Strong light-matter coupling in solid-state systems: A historical perspective

    NASA Astrophysics Data System (ADS)

    Amo, Alberto; Bloch, Jacqueline; Carusotto, Iacopo

    2016-10-01

    The possibility of engineering solid-state systems mixing light and matter excitations has opened a new era in the manipulation of photons. The strong coupling regime appears when the exchange of energy between matter and the light field, which is usually confined in a cavity, overcomes the losses. The resulting new eigenstates, named polaritons, combine light and matter properties. From their photonic component, polaritons can be manipulated and detected using standard optical techniques, while from the matter part they inherit spectacular nonlinear properties.

  16. Greenhouse design for a Martian colony: Structural, solar collection and light distribution systems

    NASA Technical Reports Server (NTRS)

    1990-01-01

    The inflatable structure serves as an ideal greenhouse while being feasible to transport and easy to assemble on Mars. Locating the structure underground protects it from the extreme environmental variations on the surface. The proposed lighting system provides all the necessary light for photosynthesis with little external power demand. These considerations make the proposed greenhouse design a viable means of providing an ongoing food supply for a Martian colony.

  17. Note: Automated optical focusing on encapsulated devices for scanning light stimulation systems

    SciTech Connect

    Bitzer, L. A.; Benson, N. Schmechel, R.

    2014-08-15

    Recently, a scanning light stimulation system with an automated, adaptive focus correction during the measurement was introduced. Here, its application on encapsulated devices is discussed. This includes the changes an encapsulating optical medium introduces to the focusing process as well as to the subsequent light stimulation measurement. Further, the focusing method is modified to compensate for the influence of refraction and to maintain a minimum beam diameter on the sample surface.

  18. Enhancement of efficiency in the use of light for cultivation of plants in controlled ecological systems

    NASA Technical Reports Server (NTRS)

    Mashinsky, A. L.; Oreshkin, V. I.; Nechitailo, G. S.

    1994-01-01

    The problems of plant cultivation with the use of artificial lighting are related to energetics and, initially, to the lack of effective sources for photosynthesis, secondly to the necessity to supply a system with a considerable power in the form of light energy and to remove transformed thermal energy, and finally to economic considerations. These problems are solved by three ways: by the choice of effective radiation sources, design approaches, and technological methods of cultivation. Here we shall consider the first two ways.

  19. Real-time intraoperative fluorescence imaging system using light-absorption correction

    NASA Astrophysics Data System (ADS)

    Themelis, George; Yoo, Jung Sun; Soh, Kwang-Sup; Schulz, Ralf; Ntziachristos, Vasilis

    2009-11-01

    We present a novel fluorescence imaging system developed for real-time interventional imaging applications. The system implements a correction scheme that improves the accuracy of epi-illumination fluorescence images for light intensity variation in tissues. The implementation is based on the use of three cameras operating in parallel, utilizing a common lens, which allows for the concurrent collection of color, fluorescence, and light attenuation images at the excitation wavelength from the same field of view. The correction is based on a ratio approach of fluorescence over light attenuation images. Color images and video is used for surgical guidance and for registration with the corrected fluorescence images. We showcase the performance metrics of this system on phantoms and animals, and discuss the advantages over conventional epi-illumination systems developed for real-time applications and the limits of validity of corrected epi-illumination fluorescence imaging.

  20. Pipeline inwall 3D measurement system based on the cross structured light

    NASA Astrophysics Data System (ADS)

    Shen, Da; Lin, Zhipeng; Xue, Lei; Zheng, Qiang; Wang, Zichi

    2014-01-01

    In order to accurately realize the defect detection of pipeline inwall, this paper proposes a measurement system made up of cross structured light, single CCD camera and a smart car, etc. Based on structured light measurement technology, this paper mainly introduces the structured light measurement system, the imaging mathematical model, and the parameters and method of camera calibration. Using these measuring principles and methods, the camera in remote control car platform achieves continuous shooting of objects and real-time rebound processing as well as utilizing established model to extract 3D point cloud coordinate to reconstruct pipeline defects, so it is possible to achieve 3D automatic measuring, and verifies the correctness and feasibility of this system. It has been found that this system has great measurement accuracy in practice.

  1. Spectral light management for solar energy conversion systems

    NASA Astrophysics Data System (ADS)

    Stanley, Cameron; Mojiri, Ahmad; Rosengarten, Gary

    2016-06-01

    Due to the inherent broadband nature of the solar radiation, combined with the narrow spectral sensitivity range of direct solar to electricity devices, there is a massive opportunity to manipulate the solar spectrum to increase the functionality and efficiency of solar energy conversion devices. Spectral splitting or manipulation facilitates the efficient combination of both high-temperature solar thermal systems, which can absorb over the entire solar spectrum to create heat, and photovoltaic cells, which only convert a range of wavelengths to electricity. It has only recently been possible, with the development of nanofabrication techniques, to integrate micro- and nano-photonic structures as spectrum splitters/manipulators into solar energy conversion devices. In this paper, we summarize the recent developments in beam splitting techniques, and highlight some relevant applications including combined PV-thermal collectors and efficient algae production, and suggest paths for future development in this field.

  2. Dual strain gage balance system for measuring light loads

    NASA Technical Reports Server (NTRS)

    Roberts, Paul W. (Inventor)

    1991-01-01

    A dual strain gage balance system for measuring normal and axial forces and pitching moment of a metric airfoil model imparted by aerodynamic loads applied to the airfoil model during wind tunnel testing includes a pair of non-metric panels being rigidly connected to and extending towards each other from opposite sides of the wind tunnel, and a pair of strain gage balances, each connected to one of the non-metric panels and to one of the opposite ends of the metric airfoil model for mounting the metric airfoil model between the pair of non-metric panels. Each strain gage balance has a first measuring section for mounting a first strain gage bridge for measuring normal force and pitching moment and a second measuring section for mounting a second strain gage bridge for measuring axial force.

  3. Electric Boosting System for Light Truck/SUV Application

    SciTech Connect

    Arnold, Steve; Balis, Craig; Barthelet, Pierre; Poix, Etienne; Samad, Tariq; Hampson, Greg; Shahed, S. M.

    2005-06-22

    Turbo diesel engine use in passenger cars in Europe has resulted in 30-50% improvement in fuel economy. Diesel engine application is particularly suitable for US because of vehicle size and duty cycle patterns. Adopting this technology for use in the US presents two issues--emissions and driveability. Emissions reduction technology is being well addressed with advanced turbocharging, fuel injection and catalytic aftertreatment systems. One way to address driveability is to eliminate turbo lag and increase low speed torque. Electrically assisted turbocharging concepts incorporated in e-TurboTM designs do both. The purpose of this project is to design and develop an electrically assisted turbocharger, e-TurboTM, for diesel engine use in the US. In this report, early design and development of electrical assist technology is described together with issues and potential benefits. In this early phase a mathematical model was developed and verified. The model was used in a sensitivity study. The results of the sensitivity study together with the design and test of first generation hardware was fed into second generation designs. In order to fully realize the benefits of electrical assist technology it was necessary to expand the scope of work to include technology on the compressor side as well as electronic controls concepts. The results of the expanded scope of work are also reported here. In the first instance, designs and hardware were developed for a small engine to quantify and demonstrate benefits. The turbo size was such that it could be applied in a bi-turbo configuration to an SUV sized V engine. Mathematical simulation was used to quantify the possible benefits in an SUV application. It is shown that low speed torque can be increased to get the high performance expected in US, automatic transmission vehicles. It is also shown that e-TurboTM can be used to generate modest amounts of electrical power and supplement the alternator under most load-speed conditions

  4. A Novel White LED Lighting System for Appreciation of Japanese Antique Ink Painting

    NASA Astrophysics Data System (ADS)

    Taguchi, Tsunemasa; Kono, Michitaka

    We have demonstrated a special plan exhibition for appreciation of Japanese antique ink painting of “The trip to Sesshu”, which used the novel warm white light-emitting diode (LED) lighting system having the average color rendering index (Ra) = 96 and special color rendering indices R9 (95) and R15 (98). A viewer is seen with an original hue and can feel a delicate three-dimensional impression. Comparing with a conventional triple A fluorescent lamp system, the developed white LED system can provide the superior illuminance properties and extremely low electric power consumption.

  5. A service platform architecture design towards a light integration of heterogeneous systems in the wellbeing domain.

    PubMed

    Yang, Yaojin; Ahtinen, Aino; Lahteenmaki, Jaakko; Nyman, Petri; Paajanen, Henrik; Peltoniemi, Teijo; Quiroz, Carlos

    2007-01-01

    System integration is one of the major challenges for building wellbeing or healthcare related information systems. In this paper, we are going to share our experiences on how to design a service platform called Nuadu service platform, for providing integrated services in occupational health promotion and health risk management through two heterogeneous systems. Our design aims for a light integration covering the layers, from data through service up to presentation, while maintaining the integrity of the underlying systems.

  6. Light-Directed Ranging System Implementing Single Camera System for Telerobotics Applications

    NASA Technical Reports Server (NTRS)

    Wells, Dennis L. (Inventor); Li, Larry C. (Inventor); Cox, Brian J. (Inventor)

    1997-01-01

    A laser-directed ranging system has utility for use in various fields, such as telerobotics applications and other applications involving physically handicapped individuals. The ranging system includes a single video camera and a directional light source such as a laser mounted on a camera platform, and a remotely positioned operator. In one embodiment, the position of the camera platform is controlled by three servo motors to orient the roll axis, pitch axis and yaw axis of the video cameras, based upon an operator input such as head motion. The laser is offset vertically and horizontally from the camera, and the laser/camera platform is directed by the user to point the laser and the camera toward a target device. The image produced by the video camera is processed to eliminate all background images except for the spot created by the laser. This processing is performed by creating a digital image of the target prior to illumination by the laser, and then eliminating common pixels from the subsequent digital image which includes the laser spot. A reference point is defined at a point in the video frame, which may be located outside of the image area of the camera. The disparity between the digital image of the laser spot and the reference point is calculated for use in a ranging analysis to determine range to the target.

  7. Characteristics of the Light Reception Systems Concerning a Kenaf Individual Model

    NASA Astrophysics Data System (ADS)

    Obara, Shin'ya

    It is thought that plants have evolved to modulate the amount of light received by the leaves in order to raise the photosynthetic rate. By investigating a plant condensing system, it is small and a directive low condensing system may be able to develop. A compact condensing system with low directivity may be able to be developed by investigating the condensing method by a plant. This paper presents the results of an investigation into light reception characteristics using the numerical-analysis program (LAPS), with emphasis on a kenaf plant (Hibiscus cannabinus) with division leaf of diversity. From this analysis, the relationship between the range of movement for the light source (sun) and the shoot configuration of a kenaf plant were clarified. There is a suitable shoot configuration, and the shoot configuration has a strong influence over the efficiency of light reception. The summer season is characterized by wide oscillations of the light source, and it is therefore necessary for the kenaf plant to adjust its shoot configuration in order to improve light reception.

  8. 77 FR 62270 - Proposed Revision Treatment of Non-Safety Systems for Passive Advanced Light Water Reactors

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-12

    ... COMMISSION Proposed Revision Treatment of Non-Safety Systems for Passive Advanced Light Water Reactors AGENCY... Treatment of Non-Safety Systems (RTNSS) for Passive Advanced Light Water Reactors.'' The current SRP does not contain guidance on the proposed RTNSS for Passive Advance Light Water Reactors. DATES:...

  9. 77 FR 55877 - Initial Test Program of Condensate and Feedwater Systems for Light-Water Reactors

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-11

    ... Federal Register on March 16, 2012 (77 FR 15812), for a 60-day public comment period. The public comment... COMMISSION Initial Test Program of Condensate and Feedwater Systems for Light-Water Reactors AGENCY: Nuclear... plant startup, and power ascension tests for the condensate and feedwater systems in all types of...

  10. Light-controlled resistors provide quadrature signal rejection for high-gain servo systems

    NASA Technical Reports Server (NTRS)

    Mc Cauley, D. D.

    1967-01-01

    Servo amplifier feedback system, in which the phase sensitive detection, low pass filtering, and multiplication functions required for quadrature rejection, are preformed by light-controlled photoresistors, eliminates complex circuitry. System increases gain, improves signal-to-noise ratio, and eliminates the necessity for compensation.

  11. Revisiting Bourdieu: Alternative Educational Systems in the Light of the Theory of Social and Cultural Reproduction

    ERIC Educational Resources Information Center

    Azaola, Marta Cristina

    2012-01-01

    The paper reflects upon the principles and practice of an alternative educational system operating in rural Mexico in the light of Bourdieu's theory of cultural and social reproduction. Bourdieu's theory seeks to explain processes of reproduction of power relations within schools and society; whereas alternative educational systems seek to expand…

  12. Preliminary greenhouse design for a Martian colony: Structural, solar collection, and light distribution systems

    NASA Astrophysics Data System (ADS)

    1990-11-01

    The design of a greenhouse that will be a component of a long-term habitat on Mars is presented. The greenhouse will be the primary food source for people stationed on Mars. The food will be grown in three identical underground modules, pressurized at 1 atm to allow a shirt-sleeve environment within the greenhouse. The underground location will support the structure, moderate the large environmental variations on the surface, and protect the crops from cosmic radiation. The design effort is concentrated on the outer structure and the lighting system for the greenhouse. The structure is inflatable and made of a Kevlar 49/Epoxy composite and a pipe-arched system that is corrugated to increase stiffness. This composite is pliable in an uncured state, which allows it to be efficiently packaged for transport. The lighting system consists of several flat-plate fiber optic solar collectors with dual-axis tracking systems that will continually track the sun. This design is modeled after the Himawari collector, which was designed by Dr. Kei Mori and is currently in use in Japan. The light will pass through Fresnel lenses that filter out undesirable wavelengths and send the light into the greenhouses by way of fiber optic cables. When the light arrives at the greenhouse, it is dispersed to the plants via a waveguide and diffuser system.

  13. Preliminary greenhouse design for a Martian colony: Structural, solar collection, and light distribution systems

    NASA Technical Reports Server (NTRS)

    1990-01-01

    The design of a greenhouse that will be a component of a long-term habitat on Mars is presented. The greenhouse will be the primary food source for people stationed on Mars. The food will be grown in three identical underground modules, pressurized at 1 atm to allow a shirt-sleeve environment within the greenhouse. The underground location will support the structure, moderate the large environmental variations on the surface, and protect the crops from cosmic radiation. The design effort is concentrated on the outer structure and the lighting system for the greenhouse. The structure is inflatable and made of a Kevlar 49/Epoxy composite and a pipe-arched system that is corrugated to increase stiffness. This composite is pliable in an uncured state, which allows it to be efficiently packaged for transport. The lighting system consists of several flat-plate fiber optic solar collectors with dual-axis tracking systems that will continually track the sun. This design is modeled after the Himawari collector, which was designed by Dr. Kei Mori and is currently in use in Japan. The light will pass through Fresnel lenses that filter out undesirable wavelengths and send the light into the greenhouses by way of fiber optic cables. When the light arrives at the greenhouse, it is dispersed to the plants via a waveguide and diffuser system.

  14. Evaluation of the use of coal combustion by-products in highway and airfield pavement construction. Research report (Final), September 1995-August 1996

    SciTech Connect

    Saylak, D.; Estakhri, C.K.; Viswanathan, R.; Tauferner, D.; Chimakurthy, H.

    1996-11-01

    The objective of this study was to exploit the beneficiation and utilization of coal combustion by-products (CCBPs) as low-cost alternate aggregates and stabilizers in roadway and airfield construction. A literature review and laboratory investigation were performed to investigate the use of CCBPs in three highway construction applications: (1) fly ash for subgrade stabilization, (2) flue gas desulfurized (FGD) gypsum and Gypsite for base and subbase construction materials, and (3) bottom ash (with sulfur modification) in asphaltic concrete mixtures. Results from field trials utilizing CCBPs in roadbases indicate good to excellent performance characteristics and negligible environmental impact. Class C and lime-enhanced Class F fly ashes were shown to be effective stabilizers for both clayey and sandy soils. The field trials showed that sulfate-resistant cements and Class C fly ashes provide a wide range of strengths in stabilized sulfate and sulfite roadbases. The use of sulfur improved the crushing strength and reduced the asphalt demand associated with bottom ash in asphaltic concrete mixtures. Sulfur modification required asphalt contents equal to and often less than for mixture using conventional aggregates. Based on its availability, lower cost, safe use, and demonstrated performance, CCBP materials should find increasing use especially in those regions of Texas experiencing dwindling or non-existant aggregate sources.

  15. Retinal mechanisms determine the subadditive response to polychromatic light by the human circadian system.

    PubMed

    Figueiro, Mariana G; Bierman, Andrew; Rea, Mark S

    2008-06-20

    Light is the major synchronizer of circadian rhythms to the 24-h solar day. The intrinsically photosensitive retinal ganglion cells (ipRGCs) play a central role in circadian regulation but cones also provide, albeit indirectly, input to these cells. In humans, spectrally opponent blue versus yellow (b-y) bipolar cells lying distal to the ganglion cell layer were hypothesized to provide direct input to the ipRGCs and therefore, the circadian system should exhibit subadditivity to some types of polychromatic light. Ten subjects participated in a within-subjects 3-night protocol. Three experimental conditions were employed that provided the same total irradiance at both eyes: (1) one unit of blue light (lambda(max)=450 nm, 0.077 W/m(2)) to the left eye plus one unit of green light (lambda(max)=525 nm, 0.211 W/m(2)) to the right eye, (2) one unit of blue light to the right eye plus one unit of green light to the left eye, and (3) 1/2 unit of blue light plus 1/2 unit of green light to both eyes. The first two conditions did not differ significantly in melatonin suppression while the third condition had significantly less melatonin suppression than conditions 1 and 2. Furthermore, the magnitudes of suppression were well predicted by a previously published model of circadian phototransduction incorporating spectral opponency. As was previously demonstrated, these results show that the human circadian system exhibits a subadditive response to certain polychromatic light spectra. This study demonstrates for the first time that subadditivity is due to spectrally opponent (color) retinal neurons.

  16. Tank selection for Light Duty Utility Arm (LDUA) system hot testing in a single shell tank

    SciTech Connect

    Bhatia, P.K.

    1995-01-31

    The purpose of this report is to recommend a single shell tank in which to hot test the Light Duty Utility Arm (LDUA) for the Tank Waste Remediation System (TWRS) in Fiscal Year 1996. The LDUA is designed to utilize a 12 inch riser. During hot testing, the LDUA will deploy two end effectors (a High Resolution Stereoscopic Video Camera System and a Still/Stereo Photography System mounted on the end of the arm`s tool interface plate). In addition, three other systems (an Overview Video System, an Overview Stereo Video System, and a Topographic Mapping System) will be independently deployed and tested through 4 inch risers.

  17. Vacuum-Compatible Wideband White Light and Laser Combiner Source System

    NASA Technical Reports Server (NTRS)

    Azizi, Alineza; Ryan, Daniel J.; Tang, Hong; Demers, Richard T.; Kadogawa, Hiroshi; An, Xin; Sun, George Y.

    2010-01-01

    For the Space Interferometry Mission (SIM) Spectrum Calibration Development Unit (SCDU) testbed, wideband white light is used to simulate starlight. The white light source mount requires extremely stable pointing accuracy (<3.2 microradians). To meet this and other needs, the laser light from a single-mode fiber was combined, through a beam splitter window with special coating from broadband wavelengths, with light from multimode fiber. Both lights were coupled to a photonic crystal fiber (PCF). In many optical systems, simulating a point star with broadband spectrum with stability of microradians for white light interferometry is a challenge. In this case, the cameras use the white light interference to balance two optical paths, and to maintain close tracking. In order to coarse align the optical paths, a laser light is sent into the system to allow tracking of fringes because a narrow band laser has a great range of interference. The design requirements forced the innovators to use a new type of optical fiber, and to take a large amount of care in aligning the input sources. The testbed required better than 1% throughput, or enough output power on the lowest spectrum to be detectable by the CCD camera (6 nW at camera). The system needed to be vacuum-compatible and to have the capability for combining a visible laser light at any time for calibration purposes. The red laser is a commercially produced 635-nm laser 5-mW diode, and the white light source is a commercially produced tungsten halogen lamp that gives a broad spectrum of about 525 to 800 nm full width at half maximum (FWHM), with about 1.4 mW of power at 630 nm. A custom-made beam splitter window with special coating for broadband wavelengths is used with the white light input via a 50-mm multi-mode fiber. The large mode area PCF is an LMA-8 made by Crystal Fibre (core diameter of 8.5 mm, mode field diameter of 6 mm, and numerical aperture at 625 nm of 0.083). Any science interferometer that needs a

  18. Lighting: Green Light.

    ERIC Educational Resources Information Center

    Maniccia, Dorine

    2003-01-01

    Explains that by using sustainable (green) building practices, schools and universities can make their lighting systems more efficient, noting that embracing green design principles can help schools attract students. Discusses lighting-control technologies (occupancy sensing technology, daylighting technology, and scheduling based technologies),…

  19. Light-emitting diode-based multiwavelength diffuse optical tomography system guided by ultrasound

    PubMed Central

    Yuan, Guangqian; Alqasemi, Umar; Chen, Aaron; Yang, Yi; Zhu, Quing

    2014-01-01

    Abstract. Laser diodes are widely used in diffuse optical tomography (DOT) systems but are typically expensive and fragile, while light-emitting diodes (LEDs) are cheaper and are also available in the near-infrared (NIR) range with adequate output power for imaging deeply seated targets. In this study, we introduce a new low-cost DOT system using LEDs of four wavelengths in the NIR spectrum as light sources. The LEDs were modulated at 20 kHz to avoid ambient light. The LEDs were distributed on a hand-held probe and a printed circuit board was mounted at the back of the probe to separately provide switching and driving current to each LED. Ten optical fibers were used to couple the reflected light to 10 parallel photomultiplier tube detectors. A commercial ultrasound system provided simultaneous images of target location and size to guide the image reconstruction. A frequency-domain (FD) laser-diode-based system with ultrasound guidance was also used to compare the results obtained from those of the LED-based system. Results of absorbers embedded in intralipid and inhomogeneous tissue phantoms have demonstrated that the LED-based system provides a comparable quantification accuracy of targets to the FD system and has the potential to image deep targets such as breast lesions. PMID:25473884

  20. Physical limits to broadening compensation in a linear slow light system.

    PubMed

    Gonzalez-Herraez, Miguel; Thévenaz, Luc

    2009-03-16

    The dispersion experienced by a signal in a slow light system leads to a significant pulse broadening and sets a limit to the maximum delay actually achievable by the system. To overcome this limitation, a substantial research effort is currently being carried out, and successful strategies to reduce distortion in linear slow light systems have already been demonstrated. Recent theoretical and experimental works have even claimed the achievement of zero-broadening of pulses in these systems. In this work we obtain some physical limits to broadening compensation in linear slow light systems based on simple Fourier analysis. We show that gain and dispersion broadening can never compensate in such a system. Additionally, it is simply proven that all the linear slow light systems that introduce a low-pass filtering of the signal (a reduction in the signal root-mean- square spectral width), will always cause pulse broadening. These demonstrations are done using a rigorous shape-independent definition of pulse width (the root-mean-square temporal width) and arguments borrowed from time-frequency analysis. PMID:19293903

  1. Design of optical system for collimating the light of an LED uniformly.

    PubMed

    Chen, Chen; Zhang, Xiaohui

    2014-05-01

    A type of optical system consisting of one total internal reflection (TIR) lens and two reflectors is designed for collimating the light of an LED to a uniform pattern. Application of this kind of optical system includes underwater light communication and an underwater image system. The TIR lens collimates all the light of the LED to a nonuniform plane wavefront. The double-reflector system redistributes the plane wavefront uniformly and collimates again. Three optical systems that produce a different radius of the output light patterns are designed. The simulation result shows that the uniformity of the designed optical system is greater than 0.76, and the total output efficiency (TOE) is greater than 89%. At the same time, we conclude that the radius of the output reflector should not be smaller than that of the input reflector in order to keep high uniformity and TOE. One of the designed optical systems is fabricated by computer numeric control, and the experiment results satisfy that goal. PMID:24979645

  2. High-resolution light field reconstruction using a hybrid imaging system.

    PubMed

    Wang, Xiang; Li, Lin; Hou, GuangQi

    2016-04-01

    Recently, light field cameras have drawn much attraction for their innovative performance in photographic and scientific applications. However, narrow baselines and constrained spatial resolution of current light field cameras impose restrictions on their usability. Therefore, we design a hybrid imaging system containing a light field camera and a high-resolution digital single lens reflex camera, and these two kinds of cameras share the same optical path with a beam splitter so as to achieve the reconstruction of high-resolution light fields. The high-resolution 4D light fields are reconstructed with a phase-based perspective variation strategy. First, we apply complex steerable pyramid decomposition on the high-resolution image from the digital single lens reflex camera. Then, we perform phase-based perspective-shift processing with the disparity value, which is extracted from the upsampled light field depth map, to create high-resolution synthetic light field images. High-resolution digital refocused images and high-resolution depth maps can be generated in this way. Furthermore, controlling the magnitude of the perspective shift enables us to change the depth of field rendering in the digital refocused images. We show several experimental results to demonstrate the effectiveness of our approach.

  3. An adaptive scaling and biasing scheme for OFDM-based visible light communication systems.

    PubMed

    Wang, Zhaocheng; Wang, Qi; Chen, Sheng; Hanzo, Lajos

    2014-05-19

    Orthogonal frequency-division multiplexing (OFDM) has been widely used in visible light communication systems to achieve high-rate data transmission. Due to the nonlinear transfer characteristics of light emitting diodes (LEDs) and owing the high peak-to-average-power ratio of OFDM signals, the transmitted signal has to be scaled and biased before modulating the LEDs. In this contribution, an adaptive scaling and biasing scheme is proposed for OFDM-based visible light communication systems, which fully exploits the dynamic range of the LEDs and improves the achievable system performance. Specifically, the proposed scheme calculates near-optimal scaling and biasing factors for each specific OFDM symbol according to the distribution of the signals, which strikes an attractive trade-off between the effective signal power and the clipping-distortion power. Our simulation results demonstrate that the proposed scheme significantly improves the performance without changing the LED's emitted power, while maintaining the same receiver structure. PMID:24921387

  4. 3d Modeling of cultural heritage objects with a structured light system.

    NASA Astrophysics Data System (ADS)

    Akca, Devrim

    3D modeling of cultural heritage objects is an expanding application area. The selection of the right technology is very important and strictly related to the project requirements, budget and user's experience. The triangulation based active sensors, e.g. structured light systems are used for many kinds of 3D object reconstruction tasks and in particular for 3D recording of cultural heritage objects. This study presents the experiences in the results of two such projects in which a close-range structured light system is used for the 3D digitization. The paper includes the essential steps of the 3D object modeling pipeline, i.e. digitization, registration, surface triangulation, editing, texture mapping and visualization. The capabilities of the used hardware and software are addressed. Particular emphasis is given to a coded structured light system as an option for data acquisition.

  5. Effect of interferences on indoor visible light car-to-car communication systems

    NASA Astrophysics Data System (ADS)

    Kim, Jong-Young; Park, Bong-Seok; Choi, Hyun-Sik; Kim, So Eun; Moon, Inkyu; Lee, Chung Ghiu

    2016-04-01

    We report the effect of interferences on visible light car-to-car communication system. The interferences from floor reflections and fluorescent lamps are taken into account for indoor car-to-car visible light communication (VLC) systems. The system is composed of a white LED lamp as a VLC transmitter and a photo-receiver with an appropriate optical filter as a VLC receiver. The signal power distribution patterns are measured and analyzed at a transmission distance, considering the positions of the transmitter and receiver. Generally, the light from fluorescent lamps in indoor environment affects the DC level of the received signal power, which is more significant at higher receiver positions. The measurements show that the indoor VLC communication performance can be varied depending on floor reflections. Also, the fluorescent ceiling illuminations affect the DC level change of the received VLC signal waveforms.

  6. Absolute calibration method for fast-streaked, fiber optic light collection, spectroscopy systems.

    SciTech Connect

    Johnston, Mark D.; Frogget, Brent; Oliver, Bryan Velten; Maron, Yitzhak; Droemer, Darryl W.; Crain, Marlon D.

    2010-04-01

    This report outlines a convenient method to calibrate fast (<1ns resolution) streaked, fiber optic light collection, spectroscopy systems. Such a system is used to collect spectral data on plasmas generated in the A-K gap of electron beam diodes fielded on the RITS-6 accelerator (8-12MV, 140-200kA). On RITS, light is collected through a small diameter (200 micron) optical fiber and recorded on a fast streak camera at the output of 1 meter Czerny-Turner monochromator (F/7 optics). To calibrate such a system, it is necessary to efficiently couple light from a spectral lamp into a 200 micron diameter fiber, split it into its spectral components, with 10 Angstroms or less resolution, and record it on a streak camera with 1ns or less temporal resolution.

  7. Design of an optical element forming an axial line segment for efficient LED lighting systems.

    PubMed

    Aslanov, Emil R; Doskolovich, Leonid L; Moiseev, Mikhail A; Bezus, Evgeni A; Kazanskiy, Nikolay L

    2013-11-18

    An LED optical element is proposed as an alternative to cold-cathode fluorescent lamps. The optical element generates two symmetric uniformly illuminated line segments on the diffuse reflector. The illuminated segments then act as secondary linear light sources. The calculation of the optical element is reduced to the integration of the system of two explicit ordinary differential equations. The results of the simulation of an illumination system module consisting of a set of optical elements generating a set of line segments on the surface of the diffuse reflector are presented. The elements are located directly on the surface of the reflector. The simulation results demonstrate the uniform illumination of a rectangular area at a distance of 30-40 mm from the light source plane. The lighting efficiency of the designed system exceeds 83%. PMID:24514376

  8. 77 FR 51780 - 36(b)(1) Arms Sales Notification

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-27

    ... Purchase: Commercially available Federal Aviation Administration Air Traffic Control and Landing Systems..., and Airfield Lighting System, spare and repair parts, support equipment, personnel training and... to Congress: 15 August 2012. ] POLICY JUSTIFICATION Iraq--Air Traffic Control and Landing System...

  9. Surface Roughness Measurement of Parts Manufactured by FDM Process using Light Sectioning Vision System

    NASA Astrophysics Data System (ADS)

    Kelkar, A. S.; Kumbhar, N. N.; Mulay, A. V.

    2016-08-01

    Fused Deposition Modeling (FDM) is a process of developing prototypes by depositing layers of material according to predetermined cross sectional geometry. Quality of the produced part is highly dependent on surface finish. This work describes a methodology to calculate the surface roughness of part manufactured using FDM process. The surface roughness values are measured using conventional stylus instrument and light sectioning vision system. In conventional stylus instrument method, diamond tipped stylus destroys the surface topography. Light sectioning method is non-contact method hence it overcomes this problem. In light sectioning method microscope and light source are arranged in such a manner, as both are inclined at an angle of 45° to the normal plane. The light section is projected on surface of profile at an incident angle of 45°. The reflected light can be observed using microscope. The camera is connected with microscope to capture the micrograph. These images are analyzed and processed using various image processing techniques. Experimental results are validated by comparing final results with conventional system.

  10. An Analysis of Light Variations of RS Canum Venaticorum Binary Systems.

    NASA Astrophysics Data System (ADS)

    Caton, Daniel Bruce

    Photoelectric data for fourteen RS Canum Venaticorum binary systems were obtained by the author from 1978 through 1981, at Rosemary Hill Observatory. These data are presented in the form of light curves and tabulated magnitudes and heliocentric Julian Dates. The outside-of-eclipse points for eight systems were Fourier analyzed for measurement of any distortion wave in the light curve. The wave in RS Canum Venaticorum itself was found to have moved half a phase unit in only two years. A wave was discovered in the light curve of RZ Eridani, and was found to have changed in a manner consistent with the starspot model for RS CVn systems. The light curve for UX Comae Bernices was found to have a large amount of intrinsic scatter, and the system was found to be anomalously bright on one night. These characteristics suggest that some type of flare activity may be present in that system. The other five systems analyzed were found to have waves consistent with other published results, or to have no definite wave at all. The possibility of detecting spots and deriving spot sizes from secondary eclipse observations was also explored. For this purpose the Wilson-Devinney computer program for light curve synthesis was modified to allow spots on the secondary star. Comparison of computer synthesized secondary eclipses of spotted stars to actual observations showed that there is little chance of detecting fluctuations due to individual spots. It was found that there is even less chance for discriminating between a few large spots and a large number of smaller spots. However, the program did produce good fits to RS CVn light curves, using reasonable spot parameters.

  11. Computer control system of the superconducting SR-light source ``Aurora''

    NASA Astrophysics Data System (ADS)

    Yamada, Hironari

    1989-07-01

    The Aurora is a compact SR-light system optimized for x-ray lithography. The system includes a superconducting electron storage ring, a 150-MeV race track microtron as an injector, and light beamlines. The SR-ring features a single magnet body, in which the 650-MeV electron beam orbits a true circular trajectory of 1 m diameter. The computer control system developed for Aurora has a three-level hierarchical architecture. The top level is the Central Intelligence System, and the second an Autonomic Control System (ACS). The bottom is an assembly of distributed local controllers linked to the ACS level through optical fibers. This system provides fully automatic and remote operation, and a powerful machine study capability through the associated man-machine console and the interpretive operation language.

  12. An Efficient LED System-in-Module for General Lighting Applications

    SciTech Connect

    None, None

    2008-09-14

    The objective of the project was to realize an LED-based lighting technology platform for general illumination, starting with LED chips, and integrating the necessary technologies to make compact, user-friendly, high-efficiency, energy-saving sources of controlled white (or variable-colored) light. The project is to build the system around the LEDs, and not to work on the LEDs themselves, in order that working products can be introduced soon after the LEDs reach suitable efficiency for mass-production of high-power light sources for general illumination. Because the light sources are intended for general illumination, color must be accurately maintained, requiring feedback control in the electronics. The project objective has been realized and screw base demonstrators, based on the technology developed in the project, have been built.

  13. Development of a hybrid atomic force microscopic measurement system combined with white light scanning interferometry.

    PubMed

    Guo, Tong; Wang, Siming; Dorantes-Gonzalez, Dante J; Chen, Jinping; Fu, Xing; Hu, Xiaotang

    2012-01-01

    A hybrid atomic force microscopic (AFM) measurement system combined with white light scanning interferometry for micro/nanometer dimensional measurement is developed. The system is based on a high precision large-range positioning platform with nanometer accuracy on which a white light scanning interferometric module and an AFM head are built. A compact AFM head is developed using a self-sensing tuning fork probe. The head need no external optical sensors to detect the deflection of the cantilever, which saves room on the head, and it can be directly fixed under an optical microscopic interferometric system. To enhance the system's dynamic response, the frequency modulation (FM) mode is adopted for the AFM head. The measuring data can be traceable through three laser interferometers in the system. The lateral scanning range can reach 25 mm × 25 mm by using a large-range positioning platform. A hybrid method combining AFM and white light scanning interferometry is proposed to improve the AFM measurement efficiency. In this method, the sample is measured firstly by white light scanning interferometry to get an overall coarse morphology, and then, further measured with higher resolution by AFM. Several measuring experiments on standard samples demonstrate the system's good measurement performance and feasibility of the hybrid measurement method.

  14. Pixel-wise absolute phase unwrapping using geometric constraints of structured light system.

    PubMed

    An, Yatong; Hyun, Jae-Sang; Zhang, Song

    2016-08-01

    This paper presents a method to unwrap phase pixel by pixel by solely using geometric constraints of the structured light system without requiring additional image acquisition or another camera. Specifically, an artificial absolute phase map, Φmin, at a given virtual depth plane z = zmin, is created from geometric constraints of the calibrated structured light system; the wrapped phase is pixel-by-pixel unwrapped by referring to Φmin. Since Φmin is defined in the projector space, the unwrapped phase obtained from this method is absolute for each pixel. Experimental results demonstrate the success of this proposed novel absolute phase unwrapping method. PMID:27505808

  15. Plasmonic-dielectric systems for high-order dispersionless slow or stopped subwavelength light.

    PubMed

    Karalis, Aristeidis; Joannopoulos, J D; Soljacić, Marin

    2009-07-24

    A material platform of multilayered surface-plasmon-dielectric-polariton systems is introduced, along with a new physical mechanism enabling simultaneous cancellation of group-velocity and attenuation dispersion to extremely high orders for subwavelength light of any small positive, negative, or zero group velocity. These dispersion-free systems could have significant impact on the development of nanophotonics, e.g., in the design of efficient and very compact delay lines and active devices. The same dispersion-manipulation mechanism can be employed to tailor at will exotic slow-light dispersion relations.

  16. QPSK modulation for AC-power-signal-biased visible light communication system

    NASA Astrophysics Data System (ADS)

    Liu, Yu-Feng; Yeh, Chien-Hung; Chow, Chi-Wai; Liu, Yang

    2013-01-01

    With the integration of light emitting diode (LED), visible light communication (VLC) can provide wireless communication link using the lightning system. Due to the consideration of power efficiency, AC-LED has the design of reducing energy waste with alternating current from the power outlet. In this work, we propose an AC-power-signalbiased system that provides communication on both DC-LED and AC-LED. The bias circuit is designed to combine ACpower signal and the message signal with QPSK format. This driving scheme needs no AC-to-DC converters and it is suitable for driving AC LED. Synchronization is completed to avoid threshold effect of LED.

  17. A 3D acquisition system combination of structured-light scanning and shape from silhouette

    NASA Astrophysics Data System (ADS)

    Sun, Changku; Tao, Li; Wang, Peng; He, Li

    2006-05-01

    A robust and accurate three dimensional (3D) acquisition system is presented, which is a combination of structured-light scanning and shape from silhouette. Using common world coordinate system, two groups of point data can be integrated into the final complete 3D model without any integration and registration algorithm. The mathematics model of structured-light scanning is described in detail, and the shape from silhouette algorithm is introduced as well. The complete 3D model of a cup with a handle is obtained successfully by the proposed technique. At last the measurement on a ball bearing is performed, with the measurement precision better than 0.15 mm.

  18. Post-Delivery test report for light duty utility arm high resolution stereoscopic video system (HRSVS)

    SciTech Connect

    Pardini, A.F., Westinghouse Hanford

    1996-05-07

    This report documents the post delivery testing of the High Resolution Stereoscopic Video Camera System (HRSVS) LDUA system,designed for use by the Light Duty Utility Arm (LDUA) project.The post delivery test shows by demonstration that the high resolution stereoscopic video camera system is fully operational to perform the task of aligning the LDUA arm and mast with the entry riser during deployment operations within a Hanford Site waste tank.

  19. An optical switch of natural light guiding system based on cubic structure with fresnel surface

    NASA Astrophysics Data System (ADS)

    Chou, Kao-Hsu; Chen, Yi-Yung; Whang, Allen Jong-Woei

    2009-08-01

    Recently, many researches focus on illumination with sunlight for saving energy and healthy lighting. A Natural Light Guiding System has collecting, transmitting, and lighting parts. In most systems, the paths on transmitting part are fixed so the collected sunlight of the Natural Light Guiding System can not be free managed and is sometime wasted. In this paper, we design an optical switch to change the path of the collected sunlight on the transmitting sunlight. The switch is cubic structure that includes a 45 degree mirror for reflecting sunlight. According to the structure of the optical switch, we can rotate the switch to manage the path of the collected sunlight. When the path is parallel with the mirror, the sunlight will pass through the switch; and when the included angle between the path and mirror is 45 degree, we can change the path of light. For coupling the exit beam into lightpipe, we design the surfaces of cubic structure to be aspheric surface with Fresnel surface. Finally, we simulate the efficiency of the optical switch when the path is changed by the mirror.

  20. The light-curve reconstruction method for measuring the time delay of gravitational lens systems

    NASA Astrophysics Data System (ADS)

    Geiger, Bernhard; Schneider, Peter

    1996-09-01

    We propose a new technique for measuring the time delay of radio-loud gravitational lens systems, which does not rely on the excessive use of interferometric observations. Instead, the method is based on single-dish flux density monitoring of the total light curve of the (unresolved) lens system, combined with additional interferometric measurements of the flux density ratio at a few epochs during that monitoring period. The basic idea of the method is to reconstruct the individual image light curves from the observed total light curve by assuming a range of potential values for the time delay and the magnification ratio of the images. It is then possible to single out the correct reconstruction, and therefore determine the time delay, by checking the consistency of the reconstructed individual light curves with the additional interferometric observations. We performed extensive numerical simulations of synthetic light curves to investigate the dependence of the performance of this method on various parameters which are involved in the problem. Probably the most promising candidates for applying the method (and also for determining the Hubble constant) are lens systems consisting of multiply imaged compact sources and an Einstein ring, such as B 0218+357 from which some of the parameters used for our simulations were adopted.