Science.gov

Sample records for airworthiness assurance center

  1. FAA Airworthiness Assurance NDI Validation Center (AANC) operated by Sandia National Laboratories.

    SciTech Connect

    Roach, Dennis Patrick; Hartman, Roger D.

    2010-09-01

    Airworthiness Assurance NDI Validation Center (AANC) objectives are: (1) Enhance aircraft safety and reliability; (2) Aid developing advanced aircraft designs and maintenance techniques; (3) Provide our customers with comprehensive, independent, and quantitative/qualitative evaluations of new and enhanced inspection, maintenance, and repair techniques; (4) Facilitate transferring effective technologies into the aviation industry; (5) Support FAA rulemaking process by providing guidance on content & necessary tools to meet requirements or recommendations of FARs, ADs, ACs, SBs, SSIDs, CPCP, and WFD; and (6) Coordinate with and respond to Airworthiness Assurance Working Group (AAWG) in support of FAA Aviation Rulemaking Advisory Committee (ARAC).

  2. Overview of composite projects at the FAA Airworthiness Assurance Validation Center

    SciTech Connect

    Shurtleff, W.W.; Roach, D.P.; Valley, M.T.

    1997-03-01

    The Airworthiness Assurance NDI Validation Center (AANC) was established by the Federal Aviation Administration (FAA) William J. Hughes Technical Center at Sandia National Laboratories in 1991 to support nondestructive inspection (NDI) technology development and assessment. The evaluations are done using a variety of characterized test specimens and test beds including entire transport and commuter aircraft. Although the initial work at the Center concentrated on metallic structure, the FAA has more recently expanded the AANC`s charter to include projects directed at composite repair and inspection. The three projects briefly described in this paper are: (1) the validation and technology transfer of a thermographic techniques for composite inspection, (2) the development of generic composite laminate and honeycomb calibration reference standards, and (3) the certification of the use of boron epoxy doubler on a Lockheed L-1011.

  3. Technology Development, Validation, and Transfer Via the FAA Airworthiness Assurance Validation

    SciTech Connect

    Perry, R.L.

    1999-04-15

    In 1991, the Federal Aviation Administration (FAA) established an Airworthiness Assurance NDI Validation Center (AANC) at Sandia National Laboratories. Its primary mission is to support technology development, validation, and transfer to industry in order to enhance the airworthiness and improve the aircraft maintenance practices of the U.S. commercial aviation industry. The Center conducts projects in a myriad of engineering disciplines. The results are placed in the public domain so that the industry at-large can reap the benefits of FAA-funded Research and Development efforts. To support the Center's goals, the FAA/AANC has set up a hangar facility at the Albuquerque International Airport which contains a collection of transport and commuter aircraft as well as other test specimens. The facility replicates a working maintenance environment by incorporating both the physical inspection difficulties as well as the environmental factors which influence maintenance reliability.

  4. Quality Assurance in Community Mental Health Centers.

    ERIC Educational Resources Information Center

    Racusin, Robert; Krell, Helen

    1980-01-01

    Advantages and disadvantages to various methods of assuring quality and accountability in community mental health centers are discussed. Examples are external structure review, peer monitoring, and site visitation. (LAB)

  5. History of Reliability and Quality Assurance at Kennedy Space Center

    NASA Technical Reports Server (NTRS)

    Childers, Frank M.

    2004-01-01

    This Kennedy Historical Document (KHD) provides a unique historical perspective of the organizational and functional responsibilities for the manned and un-manned programs at Kennedy Space Center, Florida. As systems become more complex and hazardous, the attention to detailed planning and execution continues to be a challenge. The need for a robust reliability and quality assurance program will always be a necessity to ensure mission success. As new space missions are defined and technology allows for continued access to space, these programs cannot be compromised. The organizational structure that has provided the reliability and quality assurance functions for both the manned and unmanned programs has seen many changes since the first group came to Florida in the 1950's. The roles of government and contractor personnel have changed with each program and organizational alignment has changed based on that responsibility. The organizational alignment of the personnel performing these functions must ensure independent assessment of the processes.

  6. 34 CFR 366.50 - What assurances shall a center provide and comply with?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 34 Education 2 2012-07-01 2012-07-01 false What assurances shall a center provide and comply with? 366.50 Section 366.50 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION CENTERS FOR INDEPENDENT LIVING Assurances for Centers §...

  7. Quality-Assurance Plan for Water-Quality Activities in the USGS Ohio Water Science Center

    USGS Publications Warehouse

    Francy, Donna S.; Shaffer, Kimberly H.

    2008-01-01

    In accordance with guidelines set forth by the Office of Water Quality in the Water Resources Discipline of the U.S. Geological Survey, a quality-assurance plan has been written for use by the Ohio Water Science Center in conducting water-quality activities. This quality-assurance plan documents the standards, policies, and procedures used by the Ohio Water Science Center for activities related to the collection, processing, storage, analysis, and publication of water-quality data. The policies and procedures documented in this quality-assurance plan for water-quality activities are meant to complement the Ohio Water Science Center quality-assurance plans for water-quality monitors, the microbiology laboratory, and surface-water and ground-water activities.

  8. Assure

    Integrated Risk Information System (IRIS)

    Assure ; CASRN 76578 - 14 - 8 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Effects

  9. 34 CFR 366.50 - What assurances shall a center provide and comply with?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 2 2011-07-01 2010-07-01 true What assurances shall a center provide and comply with? 366.50 Section 366.50 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION CENTERS FOR...

  10. 34 CFR 366.50 - What assurances shall a center provide and comply with?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 34 Education 2 2013-07-01 2013-07-01 false What assurances shall a center provide and comply with? 366.50 Section 366.50 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION CENTERS FOR...

  11. 34 CFR 366.50 - What assurances shall a center provide and comply with?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 34 Education 2 2014-07-01 2013-07-01 true What assurances shall a center provide and comply with? 366.50 Section 366.50 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION CENTERS FOR...

  12. Asset Analysis and Operational Concepts for Separation Assurance Flight Testing at Dryden Flight Research Center

    NASA Technical Reports Server (NTRS)

    Costa, Guillermo J.; Arteaga, Ricardo A.

    2011-01-01

    A preliminary survey of existing separation assurance and collision avoidance advancements, technologies, and efforts has been conducted in order to develop a concept of operations for flight testing autonomous separation assurance at Dryden Flight Research Center. This effort was part of the Unmanned Aerial Systems in the National Airspace System project. The survey focused primarily on separation assurance projects validated through flight testing (including lessons learned), however current forays into the field were also examined. Comparisons between current Dryden flight and range assets were conducted using House of Quality matrices in order to allow project management to make determinations regarding asset utilization for future flight tests. This was conducted in order to establish a body of knowledge of the current collision avoidance landscape, and thus focus Dryden s efforts more effectively towards the providing of assets and test ranges for future flight testing within this research field.

  13. Safety, Reliability, and Quality Assurance Provisions for the Office of Aeronautics, Exploration and Technology Centers

    NASA Technical Reports Server (NTRS)

    1991-01-01

    This Handbook establishes general safety, reliability, and quality assurance (SR&QA) guidelines for use on flight and ground-based projects conducted at the Ames, Langley, and Lewis Research Centers, hereafter identified as the Office of Aeronautics, Exploration and Technology (OAET) Centers. This document is applicable to all projects and operations conducted at these Centers except for those projects covered by more restrictive provisions such as the Space Shuttle, Space Station, and unmanned spacecraft programs. This Handbook is divided into two parts. The first (Chapters 1 and 2) establishes the SR&QA guidelines applicable to the OAET Centers, and the second (Appendices A, B, C, and D) provides examples and definitions for the total SR&QA program. Each center should implement SR&QA programs using these guidelines with tailoring appropriate to the special projects conducted by each Center. This Handbook is issued in loose-leaf form and will be revised by page changes.

  14. Surface water quality-assurance plan, U.S. Geological Survey, Kentucky Water Science Center, water year 2006

    USGS Publications Warehouse

    Griffin, Michael S.

    2006-01-01

    This Surface Water Quality-Assurance Plan documents the standards, policies, and procedures used by the Kentucky Water Science Center for activities related to the collection, processing, storage, analysis, and publication of surface-water data.

  15. Production and quality assurance automation in the Goddard Space Flight Center Flight Dynamics Facility

    NASA Technical Reports Server (NTRS)

    Chapman, K. B.; Cox, C. M.; Thomas, C. W.; Cuevas, O. O.; Beckman, R. M.

    1994-01-01

    The Flight Dynamics Facility (FDF) at the NASA Goddard Space Flight Center (GSFC) generates numerous products for NASA-supported spacecraft, including the Tracking and Data Relay Satellites (TDRS's), the Hubble Space Telescope (HST), the Extreme Ultraviolet Explorer (EUVE), and the space shuttle. These products include orbit determination data, acquisition data, event scheduling data, and attitude data. In most cases, product generation involves repetitive execution of many programs. The increasing number of missions supported by the FDF has necessitated the use of automated systems to schedule, execute, and quality assure these products. This automation allows the delivery of accurate products in a timely and cost-efficient manner. To be effective, these systems must automate as many repetitive operations as possible and must be flexible enough to meet changing support requirements. The FDF Orbit Determination Task (ODT) has implemented several systems that automate product generation and quality assurance (QA). These systems include the Orbit Production Automation System (OPAS), the New Enhanced Operations Log (NEOLOG), and the Quality Assurance Automation Software (QA Tool). Implementation of these systems has resulted in a significant reduction in required manpower, elimination of shift work and most weekend support, and improved support quality, while incurring minimal development cost. This paper will present an overview of the concepts used and experiences gained from the implementation of these automation systems.

  16. Quality-Assurance Plan for Water-Quality Activities of the U.S. Geological Survey Montana Water Science Center

    USGS Publications Warehouse

    Lambing, John H., (compiler)

    2006-01-01

    In accordance with guidelines set forth by the Office of Water Quality in the Water Resources Discipline of the U.S. Geological Survey (USGS), a quality-assurance plan has been created for use by the USGS Montana Water Science Center in conducting water-quality activities. This quality-assurance plan documents the standards, policies, and procedures used by the USGS Montana Water Science Center for activities related to the collection, processing, storage, analysis, and publication of water-quality data. The policies and procedures presented in this quality-assurance plan for water-quality activities complement the quality-assurance plans for surface-water and ground-water activities and suspended-sediment analysis.

  17. Development and status of data quality assurance program at NASA Langley research center: Toward national standards

    NASA Technical Reports Server (NTRS)

    Hemsch, Michael J.

    1996-01-01

    As part of a continuing effort to re-engineer the wind tunnel testing process, a comprehensive data quality assurance program is being established at NASA Langley Research Center (LaRC). The ultimate goal of the program is routing provision of tunnel-to-tunnel reproducibility with total uncertainty levels acceptable for test and evaluation of civilian transports. The operational elements for reaching such levels of reproducibility are: (1) statistical control, which provides long term measurement uncertainty predictability and a base for continuous improvement, (2) measurement uncertainty prediction, which provides test designs that can meet data quality expectations with the system's predictable variation, and (3) national standards, which provide a means for resolving tunnel-to-tunnel differences. The paper presents the LaRC design for the program and discusses the process of implementation.

  18. Joint CDRH (Center for Devices and Radiological Health) and state quality-assurance surveys in nuclear medicine: Phase 2 - radiopharmaceuticals

    SciTech Connect

    Hamilton, D.R.; Evans, C.D.

    1986-08-01

    The report discusses survey results on aspects of the quality assurance of radio-pharmaceuticals from 180 nuclear-medicine facilities in the United States. Data were collected from facilities in 8 states. Demographic information about nuclear-medicine operations and quality-assurance programs was gathered by state radiation-control-program personnel. The data collected from the survey show an incomplete acceptance of quality-assurance practices for radiopharmaceuticals. Most of the facilities in the survey indicated that, because an inferior radiopharmaceutical was prepared so infrequently, they did not believe it was cost-effective to perform extensive quality-assurance testing. The Center for Devices and Radiological Health hopes that the information from the survey will stimulate nuclear-medicine professionals and their organizations to encourage appropriate testing of all radiopharmaceuticals.

  19. Quality-Assurance Plan for Water-Quality Activities in the U.S. Geological Survey Washington Water Science Center

    USGS Publications Warehouse

    Wagner, Richard J.; Kimbrough, Robert A.; Turney, Gary L.

    2007-01-01

    In accordance with guidelines set forth by the Office of Water Quality in the Water Resources Discipline of the U.S. Geological Survey (USGS), this quality-assurance plan has been created for use by the USGS Washington Water Science Center (WAWSC) in conducting water-quality activities. The plan documents the standards, policies, and procedures used by the personnel of the WAWSC for activities related to the collection, processing, storage, analysis, and publication of water-quality data. The policies and procedures that are documented in this quality-assurance plan for water-quality activities are meant to complement the WAWSC's quality-assurance plans for surface-water and ground-water activities and to supplement the WAWSC quality-assurance plan.

  20. System level airworthiness tool: A comprehensive approach to small unmanned aircraft system airworthiness

    NASA Astrophysics Data System (ADS)

    Burke, David A.

    One of the pillars of aviation safety is assuring sound engineering practices through airworthiness certification. As Unmanned Aircraft Systems (UAS) grow in popularity, the need for airworthiness standards and verification methods tailored for UAS becomes critical. While airworthiness practices for large UAS may be similar to manned aircraft, it is clear that small UAS require a paradigm shift from the airworthiness practices of manned aircraft. Although small in comparison to manned aircraft these aircraft are not merely remote controlled toys. Small UAS may be complex aircraft flying in the National Airspace System (NAS) over populated areas for extended durations and beyond line of sight of the operators. A comprehensive systems engineering framework for certifying small UAS at the system level is needed. This work presents a point based tool that evaluates small UAS by rewarding good engineering practices in design, analysis, and testing. The airworthiness requirements scale with vehicle size and operational area, while allowing flexibility for new technologies and unique configurations.

  1. Quality-assurance and data-management plan for water-quality activities in the Kansas Water Science Center, 2014

    USGS Publications Warehouse

    Rasmussen, Teresa J.; Bennett, Trudy J.; Foster, Guy M.; Graham, Jennifer L.; Putnam, James E.

    2014-01-01

    As the Nation’s largest water, earth, and biological science and civilian mapping information agency, the U.S. Geological Survey is relied on to collect high-quality data, and produce factual and impartial interpretive reports. This quality-assurance and data-management plan provides guidance for water-quality activities conducted by the Kansas Water Science Center. Policies and procedures are documented for activities related to planning, collecting, storing, documenting, tracking, verifying, approving, archiving, and disseminating water-quality data. The policies and procedures described in this plan complement quality-assurance plans for continuous water-quality monitoring, surface-water, and groundwater activities in Kansas.

  2. Design, development, and implementation of the Radiological Physics Center's pelvis and thorax anthropomorphic quality assurance phantoms

    SciTech Connect

    Followill, David S.; Radford Evans, DeeAnn; Cherry, Christopher; Molineu, Andrea; Fisher, Gary; Hanson, William F.; Ibbott, Geoffrey S.

    2007-06-15

    The Radiological Physics Center (RPC) developed two heterogeneous anthropomorphic quality assurance phantoms for use in verifying the accuracy of radiation delivery: one for intensity-modulated radiation therapy (IMRT) to the pelvis and the other for stereotactic body radiation therapy (SBRT) to the thorax. The purpose of this study was to describe the design and development of these two phantoms and to demonstrate the reproducibility of measurements generated with them. The phantoms were built to simulate actual patient anatomy. They are lightweight and water-fillable, and they contain imageable targets and organs at risk of radiation exposure that are of similar densities to their human counterparts. Dosimetry inserts accommodate radiochromic film for relative dosimetry and thermoluminesent dosimetry capsules for absolute dosimetry. As a part of the commissioning process, each phantom was imaged, treatment plans were developed, and radiation was delivered at least three times. Under these controlled irradiation conditions, the reproducibility of dose delivery to the target TLD in the pelvis and thorax phantoms was 3% and 0.5%, respectively. The reproducibility of radiation-field localization was less than 2.5 mm for both phantoms. Using these anthropomorphic phantoms, pelvic IMRT and thoracic SBRT radiation treatments can be verified with a high level of precision. These phantoms can be used to effectively credential institutions for participation in specific NCI-sponsored clinical trials.

  3. The Newborn Screening Quality Assurance Program at the Centers for Disease Control and Prevention: Thirty-five Year Experience Assuring Newborn Screening Laboratory Quality

    PubMed Central

    De Jesús, Víctor R.; Mei, Joanne V.; Cordovado, Suzanne K.; Cuthbert, Carla D.

    2015-01-01

    Newborn screening is the largest genetic testing effort in the United States and is considered one of the ten great public health achievements during the first 10 years of the 21st century. For over 35 years, the Newborn Screening Quality Assurance Program (NSQAP) at the US Centers for Disease Control and Prevention has helped NBS laboratories ensure that their testing does not delay diagnosis, minimizes false-positive reports, and sustains high-quality testing performance. It is a multi-component program that provides comprehensive quality assurance services for dried blood spot testing. The NSQAP, the Biochemical Mass Spectrometry Laboratory (BMSL), the Molecular Quality Improvement Program (MQIP) and the Newborn Screening Translation Research Initiative (NSTRI), aid screening laboratories achieve technical proficiency and maintain confidence in their performance while processing large volumes of specimens daily. The accuracy of screening tests could be the difference between life and death for many babies; in other instances, identifying newborns with a disorder means that they can be treated and thus avoid life-long disability or severe cognitive impairment. Thousands of newborns and their families have benefited from reliable and accurate testing that has been accomplished by a network of screening laboratories and the NSQAP, BMSL, MQIP and NSTRI. PMID:26309908

  4. John F. Kennedy Space Center, Safety, Reliability, Maintainability and Quality Assurance, Survey and Audit Program

    NASA Technical Reports Server (NTRS)

    1994-01-01

    This document is the product of the KSC Survey and Audit Working Group composed of civil service and contractor Safety, Reliability, and Quality Assurance (SR&QA) personnel. The program described herein provides standardized terminology, uniformity of survey and audit operations, and emphasizes process assessments rather than a program based solely on compliance. The program establishes minimum training requirements, adopts an auditor certification methodology, and includes survey and audit metrics for the audited organizations as well as the auditing organization.

  5. Energy Assurance Technical Training and Awareness Program/Energy Infrastructure Training and Analysis Center

    SciTech Connect

    Barbara McCabe

    2005-11-15

    This report covers the work completed during Year One (Year One has a 16 month project period) of a five- year Cooperative Agreement (DE-FC26-03NT41895) between the International Union of Operating Engineers (IUOE) National Hazmat Program (OENHP) and the U. S. Department of Energy (DOE) National Energy Technology Laboratory (NETL). This final technical report is being submitted, as required by the Cooperative Agreement, within 90 (calendar) days after the project period ends (December 31, 2004). The resources allocated to Year One of the Cooperative Agreement were adequate for the completion of the required deliverables. All deliverables have been completed and sent to AAD Document Control as directed in the cooperative agreement. The allocation for Year One required 20-25 trainers to be trained in each of five Train-the-Trainer courses and a total of 6,000 workers trained throughout the country. Through cost savings employed for the scheduling and conduct of Train-the-Trainer, instructor refreshers, and direct training classes, 3171 workers have been trained to date. This total incorporates 159 trainers and members from management, local, county, state and federal organizations identified in the Strategic Plan. The largest percentage of personnel trained is heavy equipment operators, and building engineers, which is the largest targeted population identified under this cooperative agreement. The OENHP, using existing curriculum as appropriate, has modified and developed new training modules that have been used to establish four different levels of training courses. The four courses are: (1) EA 500 Energy Assurance Train-the-Trainer, (2) EA 400 Energy Assurance Instructor Refresher, (3) EA 300 Energy Assurance, and (4) EA 100 Energy Assurance Awareness. Training modules cover topics, such as, but not limited to, facility vulnerability and vulnerability assessment, physical security- heating, ventilation, air conditioning, terrorism awareness, weapons of mass

  6. 34 CFR 366.50 - What assurances shall a center provide and comply with?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Act; (f) The applicant will ensure that the majority of the staff, and individuals in decision-making..., and the number who are in management and decision-making positions in, the center; (6) The number of... sound organizational and personnel assignment practices, including taking affirmative action to...

  7. Fully-automated quality assurance in multi-center studies using MRI phantom measurements.

    PubMed

    Davids, Mathias; Zöllner, Frank G; Ruttorf, Michaela; Nees, Frauke; Flor, Herta; Schumann, Gunter; Schad, Lothar R

    2014-07-01

    Phantom measurements allow for investigating the overall quality characteristics of an MRI scanner. Especially within multicenter studies, these characteristics ensure the comparability of the results across different sites, in addition to the performance stability of a single scanner over time. This comparability requires consistent phantoms, sequence protocols, and quality assurance criteria. Within the scope of this work, a software library was implemented for fully-automated determination of important quality characteristics (comprising signal-to-noise ratio, image uniformity, ghosting artifacts, chemical shift and spatial resolution and linearity) including methods for data preparation, automated pre- and postprocessing as well as visualization and interpretation. All methods were evaluated using both synthetic images with predefined distortions and a set of 44 real phantom measurements involving eight sites and three manufacturers. Using the synthetic phantom images, predefined levels of distortion that were incorporated artificially were correctly detected by the automated routines with no more than 2.6% of relative error. In addition, the methods were applied to real phantom measurements - all data sets could be evaluated automatically considering all quality parameters as long as the acquisition protocols are followed. Shortcomings of the processability only occurred in the ghosting artifacts (39/44 evaluable) and the spatial linearity (43/44 evaluable) analysis due to gross misalignments of the phantom during image acquisition. Based on evaluation results, the accuracy of the evaluation appears to be robust to misalignments, artifacts, and distortions affecting the images, allowing for objective fully-automated evaluation and interpretation of large data set numbers. PMID:24602825

  8. Quality Assurance Plan for Field Activities at the Natural and Accelerated Bioremediation Research (NABIR) Field Research Center (FRC), Oak Ridge, Tennessee

    SciTech Connect

    Brandt, C.C.

    2002-02-28

    The Environmental Sciences Division (ESD) at Oak Ridge National Laboratory (ORNL) has established a Natural and Accelerated Bioremediation Research (NABIR) program Field Research Center (FRC) for the U.S. Department of Energy (DOE) Office of Biological and Environmental Research. The FRC is located in Bear Creek Valley within the Y-12 Plant area of responsibility on DOE's Oak Ridge Reservation in Tennessee. The NABIR program is a long-term effort designed to increase the understanding of fundamental biogeochemical processes that would allow the use of bioremediation approaches for cleaning up DOE's contaminated legacy waste sites. The FRC provides a site for investigators in the NABIR program to conduct research and obtain samples related to in situ bioremediation. The FRC is integrated with existing and future laboratory and field research and provides a means of examining the biogeochemical processes that influence bioremediation under controlled small-scale field conditions. This Quality Assurance Plan (QAP) documents the quality assurance protocols for field and laboratory activities performed by the FRC staff. It supplements the requirements in the ORNL Nuclear Quality Assurance Program and the ESD Quality Assurance Program. The QAP addresses the requirements in Title 10 CFR, Part 830 Subpart A, ''Quality Assurance Requirements'', using a graded approach appropriate for Research and Development projects based on guidance from ''Implementation Guide for Quality Assurance Programs for Basic and Applied Research'' (DOE-ER-STD-6001-92). It also supports the NABIR FRC Management Plan (Watson and Quarles 2000a) which outlines the overall procedures, roles and responsibilities for conducting research at the FRC. The QAP summarizes the organization, work activities, and qualify assurance and quality control protocols that will be used to generate scientifically defensible data at the FRC. The QAP pertains to field measurements and sample collection conducted by the

  9. Quality Assurance.

    ERIC Educational Resources Information Center

    Massachusetts Career Development Inst., Springfield.

    This booklet is one of six texts from a workplace literacy curriculum designed to assist learners in facing the increased demands of the workplace. The booklet contains five sections that cover the following topics: (1) importance of reliability; (2) meaning of quality assurance; (3) historical development of quality assurance; (4) statistical…

  10. [The cost of quality assurance].

    PubMed

    Materson, B J; Quintana, O

    1993-01-01

    This paper views quality assurance costs as appraisal costs. We used cost accounting techniques to estimate the cost of quality assurance activities in a large university affiliated Veteran Administration Medical Center. In addition to the personnel employed full-time for quality assurance activities, all other employees in or directly in support of clinical services were interviewed in order to determine the per cent of their work time devoted to specific quality assurance activities. The per cent time committed was multiplied by the salary and benefits package for each employee and the total computed for the facility. In addition, non-salary overhead expenses were estimated by multiplying the salary and fringe benefit costs to the ratio of total medical center non-personnel costs to total medical center costs. We found that 3.39 per cent of the total budget or $4,884,775 was devoted to quality assurance activities. The highest costs aside from the designated quality assurance personnel were for pharmacy, Laboratory, extended care (including nursing home), psychiatry, and nursing services. We did not attempt a formal benefit analysis. We concluded that quality assurance activities in a major medical center are not free. Careful cost accounting studies should be performed both to determine the cost of quality assurance and to identify its specific benefits. PMID:8322107

  11. 77 FR 3088 - Airworthiness Directives; General Electric Company Turbofan Engines

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-23

    ...We are adopting a new airworthiness directive (AD) for General Electric Company (GE) CF34-10E series turbofan engines. This AD was prompted by a report of heavy wear found on the seating surface of the center vent duct (CVD) (commonly referred to as center vent tube) support ring and on the inside diameter of the fan drive shaft at the mating location. This AD requires removing from service......

  12. Software Quality Assurance Audits Guidebooks

    NASA Technical Reports Server (NTRS)

    1990-01-01

    The growth in cost and importance of software to NASA has caused NASA to address the improvement of software development across the agency. One of the products of this program is a series of guidebooks that define a NASA concept of the assurance processes that are used in software development. The Software Assurance Guidebook, NASA-GB-A201, issued in September, 1989, provides an overall picture of the NASA concepts and practices in software assurance. Second level guidebooks focus on specific activities that fall within the software assurance discipline, and provide more detailed information for the manager and/or practitioner. This is the second level Software Quality Assurance Audits Guidebook that describes software quality assurance audits in a way that is compatible with practices at NASA Centers.

  13. Quality assurance

    SciTech Connect

    Gillespie, B.M.; Gleckler, B.P.

    1995-06-01

    This section of the 1994 Hanford Site Environmental Report summarizes the quality assurance and quality control practices of Hanford Site environmental monitoring and surveillance programs. Samples are analyzed according to documented standard analytical procedures. This section discusses specific measures taken to ensure quality in project management, sample collection, and analytical results.

  14. 77 FR 55773 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-11

    ...We are revising an earlier proposed airworthiness directive (AD) for all The Boeing Company Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87 (MD-87), and MD-88 airplanes. That NPRM proposed repetitive high frequency eddy current (HFEC) inspections for cracking of the left and right rib hinge bearing lugs of the aft face of the center section of the horizontal stabilizer;......

  15. 78 FR 21571 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-11

    ...We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 747-400, -400D, and -400F series airplanes. This proposed AD was prompted by a report of water leakage into the main deck cargo wire integration unit (WIU). The water flowed from the drip shield through disbonded floor seams into the aft main equipment center (MEC) drip shield gutter, then onto the WIU.......

  16. 14 CFR 91.1413 - CAMP: Responsibility for airworthiness.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Ownership Operations Program Management § 91.1413 CAMP: Responsibility for airworthiness. (a) For aircraft... primarily responsible for the following: (1) Maintaining the airworthiness of the program...

  17. Initial Experimental Airworthiness Certification Guidance for UAS. UAS Experimental Certification Process and Guidance

    NASA Technical Reports Server (NTRS)

    2005-01-01

    This paper addresses the regulatory processes and requirements already in place by which an applicant might obtain experimental airworthiness certification for a civil Unmanned Aircraft System (UAS). It is more extensive and subsequent to an earlier, similar deliverable, PD007, which was an interim study of the same topic. Since few regulatory airworthiness and operating standards exist for UAS like those for traditional manned aircraft and since most UAS have historically been developed and operated under military auspices, civil use of UAS in the NAS is a new and unfamiliar challenge requiring specific and unique considerations. Experimental certification is the most basic level of FAA approval toward routine UAS operation in the NAS. The paper reviews and explains existing FAA requirements for an applicant seeking experimental airworthiness approval and details the process for submission of necessary information. It summarizes the limited purposes for which experimental aircraft may be used and addresses pertinent aspects of UAS design, construction and operation in the NAS in harmony with traditional manned aircraft. Policy IPT position is that UAS, while different from manned aircraft, can use the same initial processes to gain civil operating experience under the experimental approval. Particular note is taken of those UAS-unique characteristics which require extra attention to assure equivalent safety of operation, such as the UAS control station and sense-and-avoid. The paper also provides "best practices" guidance for UAS manufacturers and FAA personnel in two appendices. The material in Appendix A is intended to provide guidance on assuring UAS safety to FAA, and provides FAA personnel with a suggested list of items to review, with a focus on UAS unique factors, prior to issuance of an experimental airworthiness certificate. Appendix B provides an outline for a program letter which a manufacturer could use in preparing the application for an UAS

  18. 42 CFR 457.495 - State assurance of access to care and procedures to assure quality and appropriateness of care.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false State assurance of access to care and procedures to assure quality and appropriateness of care. 457.495 Section 457.495 Public Health CENTERS FOR MEDICARE... State assurance of access to care and procedures to assure quality and appropriateness of care. A...

  19. 14 CFR 21.325 - Export airworthiness approvals.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Export airworthiness approvals. 21.325... AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Export Airworthiness Approvals § 21.325 Export airworthiness approvals. (a) Kinds of approvals. (1) Export airworthiness approval of Class I products is...

  20. 76 FR 3856 - Airworthiness Directives; The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-21

    ..., replacing the fuel pump power control relays for the main, center and auxiliary tanks, as applicable, with...'' (66 FR 23086, May 7, 2001). In addition to new airworthiness standards for transport airplanes and new... fuel boost pumps, the center tank fuel boost pumps, and for certain airplanes, the auxiliary tank...

  1. GSFC Safety and Mission Assurance Organization

    NASA Technical Reports Server (NTRS)

    Kelly, Michael P.

    2010-01-01

    This viewgraph presentation reviews NASA Goddard Space Flight Center's approach to safety and mission assurance. The contents include: 1) NASA GSFC Background; 2) Safety and Mission Assurance Directorate; 3) The Role of SMA-D and the Technical Authority; 4) GSFC Mission assurance Requirements; 5) GSFC Systems Review Office (SRO); 6) GSFC Supply Chain Management Program; and 7) GSFC ISO9001/AS9100 Status Brief.

  2. Quality assurance manual: Volume 2, Appendices

    SciTech Connect

    Oijala, J.E.

    1988-06-01

    This paper contains quality assurance information on departments of the Stanford Linear Accelerator Center. Particular quality assurance policies and standards discussed are on: Mechanical Systems; Klystron and Microwave Department; Electronics Department; Plant Engineering; Accelerator Department; Purchasing; and Experimental Facilities Department. (LSP)

  3. Product assurance management and software product assurance

    NASA Technical Reports Server (NTRS)

    Schneider, C.; Borycki, G.; Panaroni, P.; Surbone, M.; Borcz, R.; Beddow, A. J.

    1991-01-01

    The evolution of software assurance is discussed. The definition and implementation of standards are considered. It is recommended that requirements be clarified at the start of a project. The need for quality assurance in hardware is identified as the coming trend in the production of high cost single units which call for eradication of all errors during the early stages of development. The need to apply quality assurance throughout the whole mission is stressed. The dangers of overpricing product assurance services is stressed.

  4. College Quality Assurance Assurances. Mendip Papers 020.

    ERIC Educational Resources Information Center

    Sallis, E.; Hingley, P.

    This paper discusses the increasing interest in quality assurance in British education including its measurement and management through the introduction of a quality assurance system. The reasons and benefits of beginning a quality assurance system are discussed, and questions of what constitutes quality, whether it is quality in fact…

  5. Software Assurance Using Structured Assurance Case Models

    PubMed Central

    Rhodes, Thomas; Boland, Frederick; Fong, Elizabeth; Kass, Michael

    2010-01-01

    Software assurance is an important part of the software development process to reduce risks and ensure that the software is dependable and trustworthy. Software defects and weaknesses can often lead to software errors and failures and to exploitation by malicious users. Testing, certification and accreditation have been traditionally used in the software assurance process to attempt to improve software trustworthiness. In this paper, we examine a methodology known as a structured assurance model, which has been widely used for assuring system safety, for its potential application to software assurance. We describe the structured assurance model and examine its application and use for software assurance. We identify strengths and weaknesses of this approach and suggest areas for further investigation and testing. PMID:27134787

  6. 14 CFR 27.27 - Center of gravity limits.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Center of gravity limits. 27.27 Section 27... AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Flight General § 27.27 Center of gravity limits. The extreme forward and aft centers of gravity and, where critical, the extreme lateral centers of gravity must...

  7. 14 CFR 29.27 - Center of gravity limits.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Center of gravity limits. 29.27 Section 29... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Flight General § 29.27 Center of gravity limits. The extreme forward and aft centers of gravity and, where critical, the extreme lateral centers of...

  8. 14 CFR 27.27 - Center of gravity limits.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Center of gravity limits. 27.27 Section 27... AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Flight General § 27.27 Center of gravity limits. The extreme forward and aft centers of gravity and, where critical, the extreme lateral centers of gravity must...

  9. 14 CFR 27.27 - Center of gravity limits.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Center of gravity limits. 27.27 Section 27... AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Flight General § 27.27 Center of gravity limits. The extreme forward and aft centers of gravity and, where critical, the extreme lateral centers of gravity must...

  10. 14 CFR 29.27 - Center of gravity limits.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Center of gravity limits. 29.27 Section 29... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Flight General § 29.27 Center of gravity limits. The extreme forward and aft centers of gravity and, where critical, the extreme lateral centers of...

  11. 14 CFR 29.27 - Center of gravity limits.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Center of gravity limits. 29.27 Section 29... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Flight General § 29.27 Center of gravity limits. The extreme forward and aft centers of gravity and, where critical, the extreme lateral centers of...

  12. 14 CFR 29.27 - Center of gravity limits.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Center of gravity limits. 29.27 Section 29... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Flight General § 29.27 Center of gravity limits. The extreme forward and aft centers of gravity and, where critical, the extreme lateral centers of...

  13. 14 CFR 27.27 - Center of gravity limits.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Center of gravity limits. 27.27 Section 27... AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Flight General § 27.27 Center of gravity limits. The extreme forward and aft centers of gravity and, where critical, the extreme lateral centers of gravity must...

  14. 14 CFR 27.27 - Center of gravity limits.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Center of gravity limits. 27.27 Section 27... AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Flight General § 27.27 Center of gravity limits. The extreme forward and aft centers of gravity and, where critical, the extreme lateral centers of gravity must...

  15. 14 CFR 29.27 - Center of gravity limits.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Center of gravity limits. 29.27 Section 29... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Flight General § 29.27 Center of gravity limits. The extreme forward and aft centers of gravity and, where critical, the extreme lateral centers of...

  16. 14 CFR 43.16 - Airworthiness limitations.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Airworthiness limitations. 43.16 Section 43.16 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT... manufacturer's maintenance manual or Instructions for Continued Airworthiness shall perform the inspection...

  17. Software assurance standard

    NASA Technical Reports Server (NTRS)

    1992-01-01

    This standard specifies the software assurance program for the provider of software. It also delineates the assurance activities for the provider and the assurance data that are to be furnished by the provider to the acquirer. In any software development effort, the provider is the entity or individual that actually designs, develops, and implements the software product, while the acquirer is the entity or individual who specifies the requirements and accepts the resulting products. This standard specifies at a high level an overall software assurance program for software developed for and by NASA. Assurance includes the disciplines of quality assurance, quality engineering, verification and validation, nonconformance reporting and corrective action, safety assurance, and security assurance. The application of these disciplines during a software development life cycle is called software assurance. Subsequent lower-level standards will specify the specific processes within these disciplines.

  18. 76 FR 6529 - Airworthiness Directives; The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-07

    ...We are adopting a new airworthiness directive (AD) for the products listed above. This AD requires installing two warning level indicator lights on the P2-2 center instrument panel in the flight compartment for certain airplanes. For a certain other airplane, this AD requires activating the cabin altitude warning and takeoff configuration warning lights. For all airplanes, this AD also......

  19. 76 FR 53317 - Airworthiness Directives; The Boeing Company Model 737-600, -700, -700C, -800, and -900 Series...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-26

    ...We are adopting a new airworthiness directive (AD) for the products listed above. This AD requires installation of an automatic shutoff system for the center tank fuel boost pumps, and installation of a placard in the airplane flight deck if necessary. This AD also requires revisions to the Limitations and Normal Procedures sections of the airplane flight manual to advise the flightcrew of......

  20. 14 CFR 25.27 - Center of gravity limits.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Center of gravity limits. 25.27 Section 25... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Flight General § 25.27 Center of gravity limits. The extreme forward and the extreme aft center of gravity limitations must be established for each...

  1. 14 CFR 25.27 - Center of gravity limits.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Center of gravity limits. 25.27 Section 25... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Flight General § 25.27 Center of gravity limits. The extreme forward and the extreme aft center of gravity limitations must be established for each...

  2. 14 CFR 25.27 - Center of gravity limits.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Center of gravity limits. 25.27 Section 25... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Flight General § 25.27 Center of gravity limits. The extreme forward and the extreme aft center of gravity limitations must be established for each...

  3. 14 CFR 25.27 - Center of gravity limits.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Center of gravity limits. 25.27 Section 25... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Flight General § 25.27 Center of gravity limits. The extreme forward and the extreme aft center of gravity limitations must be established for each...

  4. 14 CFR 25.27 - Center of gravity limits.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Center of gravity limits. 25.27 Section 25... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Flight General § 25.27 Center of gravity limits. The extreme forward and the extreme aft center of gravity limitations must be established for each...

  5. QUALITY ASSURANCE UPDATE

    EPA Science Inventory

    An overview of the air pollution quality assurance program as implemented by EMSL/RTP is presented. The discussion includes method standardization operations for both ambient air and stationary source measurements, the quality assurance audit program, the ambient air equivalency ...

  6. Quality Assurance Project Plan

    SciTech Connect

    Holland, R. C.

    1998-06-01

    This Quality Assurance Project Plan documents the quality assurance activities for the Wastewater/Stormwater/Groundwater and Environmental Surveillance Programs. This QAPP was prepared in accordance with DOE guidance on compliance with 10CFR830.120.

  7. 14 CFR 91.7 - Civil aircraft airworthiness.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 2 2011-01-01 2011-01-01 false Civil aircraft airworthiness. 91.7 Section... aircraft airworthiness. (a) No person may operate a civil aircraft unless it is in an airworthy condition. (b) The pilot in command of a civil aircraft is responsible for determining whether that aircraft...

  8. 14 CFR 91.7 - Civil aircraft airworthiness.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 2 2013-01-01 2013-01-01 false Civil aircraft airworthiness. 91.7 Section... aircraft airworthiness. (a) No person may operate a civil aircraft unless it is in an airworthy condition. (b) The pilot in command of a civil aircraft is responsible for determining whether that aircraft...

  9. 14 CFR 91.7 - Civil aircraft airworthiness.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 2 2012-01-01 2012-01-01 false Civil aircraft airworthiness. 91.7 Section... aircraft airworthiness. (a) No person may operate a civil aircraft unless it is in an airworthy condition. (b) The pilot in command of a civil aircraft is responsible for determining whether that aircraft...

  10. 14 CFR 91.7 - Civil aircraft airworthiness.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 2 2014-01-01 2014-01-01 false Civil aircraft airworthiness. 91.7 Section... aircraft airworthiness. (a) No person may operate a civil aircraft unless it is in an airworthy condition. (b) The pilot in command of a civil aircraft is responsible for determining whether that aircraft...

  11. 14 CFR 39.3 - Definition of airworthiness directives.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Definition of airworthiness directives. 39.3 Section 39.3 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS DIRECTIVES § 39.3 Definition of airworthiness directives. FAA's...

  12. 14 CFR 39.3 - Definition of airworthiness directives.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Definition of airworthiness directives. 39.3 Section 39.3 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS DIRECTIVES § 39.3 Definition of airworthiness directives. FAA's...

  13. 14 CFR 21.269 - Export airworthiness approvals.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Export airworthiness approvals. 21.269 Section 21.269 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION....269 Export airworthiness approvals. The manufacturer may issue export airworthiness approvals....

  14. 14 CFR 91.7 - Civil aircraft airworthiness.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Civil aircraft airworthiness. 91.7 Section... aircraft airworthiness. (a) No person may operate a civil aircraft unless it is in an airworthy condition. (b) The pilot in command of a civil aircraft is responsible for determining whether that aircraft...

  15. Multinational Quality Assurance

    ERIC Educational Resources Information Center

    Kinser, Kevin

    2011-01-01

    Multinational colleges and universities pose numerous challenges to the traditional models of quality assurance that are designed to validate domestic higher education. When institutions cross international borders, at least two quality assurance protocols are involved. To guard against fraud and abuse, quality assurance in the host country is…

  16. 14 CFR 31.82 - Instructions for Continued Air-worthiness.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: MANNED FREE BALLOONS Operating Limitations and Information § 31... delivery of the first balloon or issuance of a standard certificate of airworthiness, whichever...

  17. Quality Assurance for Clinical Trials

    PubMed Central

    Ibbott, Geoffrey S.; Haworth, Annette; Followill, David S.

    2013-01-01

    Cooperative groups, of which the Radiation Therapy Oncology Group is one example, conduct national clinical trials that often involve the use of radiation therapy. In preparation for such a trial, the cooperative group prepares a protocol to define the goals of the trial, the rationale for its design, and the details of the treatment procedure to be followed. The Radiological Physics Center (RPC) is one of several quality assurance (QA) offices that is charged with assuring that participating institutions deliver doses that are clinically consistent and comparable. The RPC does this by conducting a variety of independent audits and credentialing processes. The RPC has compiled data showing that credentialing can help institutions comply with the requirements of a cooperative group clinical protocol. Phantom irradiations have been demonstrated to exercise an institution’s procedures for planning and delivering advanced external beam techniques (1–3). Similarly, RPC data indicate that a rapid review of patient treatment records or planning procedures can improve compliance with clinical trials (4). The experiences of the RPC are presented as examples of the contributions that a national clinical trials QA center can make to cooperative group trials. These experiences illustrate the critical need for comprehensive QA to assure that clinical trials are successful and cost-effective. The RPC is supported by grants CA 10953 and CA 81647 from the National Cancer Institute, NIH, DHHS. PMID:24392352

  18. High assurance SPIRAL

    NASA Astrophysics Data System (ADS)

    Franchetti, Franz; Sandryhaila, Aliaksei; Johnson, Jeremy R.

    2014-06-01

    In this paper we introduce High Assurance SPIRAL to solve the last mile problem for the synthesis of high assurance implementations of controllers for vehicular systems that are executed in today's and future embedded and high performance embedded system processors. High Assurance SPIRAL is a scalable methodology to translate a high level specification of a high assurance controller into a highly resource-efficient, platform-adapted, verified control software implementation for a given platform in a language like C or C++. High Assurance SPIRAL proves that the implementation is equivalent to the specification written in the control engineer's domain language. Our approach scales to problems involving floating-point calculations and provides highly optimized synthesized code. It is possible to estimate the available headroom to enable assurance/performance trade-offs under real-time constraints, and enables the synthesis of multiple implementation variants to make attacks harder. At the core of High Assurance SPIRAL is the Hybrid Control Operator Language (HCOL) that leverages advanced mathematical constructs expressing the controller specification to provide high quality translation capabilities. Combined with a verified/certified compiler, High Assurance SPIRAL provides a comprehensive complete solution to the efficient synthesis of verifiable high assurance controllers. We demonstrate High Assurance SPIRALs capability by co-synthesizing proofs and implementations for attack detection and sensor spoofing algorithms and deploy the code as ROS nodes on the Landshark unmanned ground vehicle and on a Synthetic Car in a real-time simulator.

  19. 75 FR 36579 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-30, DC-10-30F, DC-10-30F (KC...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-28

    ... Inspection Requirements'' (66 FR 23086, May 7, 2001). In addition to new airworthiness standards for... Policies and Procedures (44 FR 11034, February 26, 1979), and 3. Will not have a significant economic... inspection for damage to the fuel vapor barrier seal and upper surface of the center upper auxiliary...

  20. Flight Dynamics Mission Support and Quality Assurance Process

    NASA Technical Reports Server (NTRS)

    Oh, InHwan

    1996-01-01

    This paper summarizes the method of the Computer Sciences Corporation Flight Dynamics Operation (FDO) quality assurance approach to support the National Aeronautics and Space Administration Goddard Space Flight Center Flight Dynamics Support Branch. Historically, a strong need has existed for developing systematic quality assurance using methods that account for the unique nature and environment of satellite Flight Dynamics mission support. Over the past few years FDO has developed and implemented proactive quality assurance processes applied to each of the six phases of the Flight Dynamics mission support life cycle: systems and operations concept, system requirements and specifications, software development support, operations planing and training, launch support, and on-orbit mission operations. Rather than performing quality assurance as a final step after work is completed, quality assurance has been built in as work progresses in the form of process assurance. Process assurance activities occur throughout the Flight Dynamics mission support life cycle. The FDO Product Assurance Office developed process checklists for prephase process reviews, mission team orientations, in-progress reviews, and end-of-phase audits. This paper will outline the evolving history of FDO quality assurance approaches, discuss the tailoring of Computer Science Corporations's process assurance cycle procedures, describe some of the quality assurance approaches that have been or are being developed, and present some of the successful results.

  1. 42 CFR 422.210 - Assurances to CMS.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Assurances to CMS. 422.210 Section 422.210 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM MEDICARE ADVANTAGE PROGRAM Relationships With Providers § 422.210 Assurances to CMS....

  2. Product assurance policies and procedures for flight dynamics software development

    NASA Technical Reports Server (NTRS)

    Perry, Sandra; Jordan, Leon; Decker, William; Page, Gerald; Mcgarry, Frank E.; Valett, Jon

    1987-01-01

    The product assurance policies and procedures necessary to support flight dynamics software development projects for Goddard Space Flight Center are presented. The quality assurance and configuration management methods and tools for each phase of the software development life cycles are described, from requirements analysis through acceptance testing; maintenance and operation are not addressed.

  3. 78 FR 5813 - 2013 Assuring Radiation Protection

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-28

    ...The Food and Drug Administration (FDA) is announcing the availability of grant funds for the support of the Center for Devices and Radiological Health (CDRH) radiation protection program. The goal of the 2013 Assuring Radiation Protection will be to coordinate Federal, State, and Tribal activities to achieve effective solutions to present and future radiation control problems. The recipient of......

  4. Quality Assurance Manual

    SciTech Connect

    McGarrah, J.E.

    1995-05-01

    In order to provide clients with quality products and services, Pacific Northwest Laboratory (PNL) has established and implemented a formal quality assurance program. These management controls are documented in this manual (PNL-MA-70) and its accompanying standards and procedures. The QA Program meets the basic requirements and supplements of ANSI/ASME NQA-1, Quality Assurance Program Requirements for Nuclear Facilities, as interpreted for PNL activities. Additional, the quality requirements are augmented to include the Total Quality approach defined in the Department of Energy Order 5700.6C, Quality Assurance. This manual provides requirements and an overview of the administrative procedures that apply to projects and activities.

  5. Software quality assurance handbook

    SciTech Connect

    Not Available

    1990-09-01

    There are two important reasons for Software Quality Assurance (SQA) at Allied-Signal Inc., Kansas City Division (KCD): First, the benefits from SQA make good business sense. Second, the Department of Energy has requested SQA. This handbook is one of the first steps in a plant-wide implementation of Software Quality Assurance at KCD. The handbook has two main purposes. The first is to provide information that you will need to perform software quality assurance activities. The second is to provide a common thread to unify the approach to SQA at KCD. 2 figs.

  6. Quality Assurance in Radiotherapy

    NASA Astrophysics Data System (ADS)

    Mckenzie, Alan

    A common feature of the Radiotherapy Centres where there have been major accidents involving incorrect radiotherapy treatment is that they did not operate good Quality Assurance systems. A Quality Assurance system is sometimes called a Quality Management system, and it is designed to give assurance that quality standards are being met. One of the "spin offs" from operating a Quality Management system is that it reduces the likelihood of a radiotherapy accident. A detailed account of how to set up a quality system in radiotherapy has been given in an ESTRO booklet.2

  7. Healthcare Software Assurance

    PubMed Central

    Cooper, Jason G.; Pauley, Keith A.

    2006-01-01

    Software assurance is a rigorous, lifecycle phase-independent set of activities which ensure completeness, safety, and reliability of software processes and products. This is accomplished by guaranteeing conformance to all requirements, standards, procedures, and regulations. These assurance processes are even more important when coupled with healthcare software systems, embedded software in medical instrumentation, and other healthcare-oriented life-critical systems. The current Food and Drug Administration (FDA) regulatory requirements and guidance documentation do not address certain aspects of complete software assurance activities. In addition, the FDA’s software oversight processes require enhancement to include increasingly complex healthcare systems such as Hospital Information Systems (HIS). The importance of complete software assurance is introduced, current regulatory requirements and guidance discussed, and the necessity for enhancements to the current processes shall be highlighted. PMID:17238324

  8. Healthcare software assurance.

    PubMed

    Cooper, Jason G; Pauley, Keith A

    2006-01-01

    Software assurance is a rigorous, lifecycle phase-independent set of activities which ensure completeness, safety, and reliability of software processes and products. This is accomplished by guaranteeing conformance to all requirements, standards, procedures, and regulations. These assurance processes are even more important when coupled with healthcare software systems, embedded software in medical instrumentation, and other healthcare-oriented life-critical systems. The current Food and Drug Administration (FDA) regulatory requirements and guidance documentation do not address certain aspects of complete software assurance activities. In addition, the FDA's software oversight processes require enhancement to include increasingly complex healthcare systems such as Hospital Information Systems (HIS). The importance of complete software assurance is introduced, current regulatory requirements and guidance discussed, and the necessity for enhancements to the current processes shall be highlighted. PMID:17238324

  9. RAVEN Quality Assurance Activities

    SciTech Connect

    Cogliati, Joshua Joseph

    2015-09-01

    This report discusses the quality assurance activities needed to raise the Quality Level of Risk Analysis in a Virtual Environment (RAVEN) from Quality Level 3 to Quality Level 2. This report also describes the general RAVEN quality assurance activities. For improving the quality, reviews of code changes have been instituted, more parts of testing have been automated, and improved packaging has been created. For upgrading the quality level, requirements have been created and the workflow has been improved.

  10. Performance assurance program plan

    SciTech Connect

    Rogers, B.H.

    1997-11-06

    B and W Protec, Inc. (BWP) is responsible for implementing the Performance Assurance Program for the Project Hanford Management Contract (PHMC) in accordance with DOE Order 470.1, Safeguards and Security Program (DOE 1995a). The Performance Assurance Program applies to safeguards and security (SAS) systems and their essential components (equipment, hardware, administrative procedures, Protective Force personnel, and other personnel) in direct support of Category I and H special nuclear material (SNM) protection. Performance assurance includes several Hanford Site activities that conduct performance, acceptance, operability, effectiveness, and validation tests. These activities encompass areas of training, exercises, quality assurance, conduct of operations, total quality management, self assessment, classified matter protection and control, emergency preparedness, and corrective actions tracking and trending. The objective of the Performance Assurance Program is to capture the critical data of the tests, training, etc., in a cost-effective, manageable program that reflects the overall effectiveness of the program while minimizing operational impacts. To aid in achieving this objective, BWP will coordinate the Performance Assurance Program for Fluor Daniel Hanford, Inc. (FDH) and serve as the central point for data collection.

  11. A STOL airworthiness investigation using a simulation of an augmentor wing transport. Volume 1: Summary of results and airworthiness implications

    NASA Technical Reports Server (NTRS)

    Stapleford, R. L.; Heffley, R. K.; Hynes, C. S.; Scott, B. C.

    1974-01-01

    A simulator study of STOL airworthiness criteria was conducted using a model of an augmentor wing transport. The approach, flare and landing, go-around, and takeoff phases of flight were investigated. The results are summarized and possible implications with regard to airworthiness criteria are discussed. The results provide a data base for future STOL airworthiness requirements and a preliminary indication of potential problem areas. The results are also compared to the results from an earlier simulation of the Breguet 941S. Where possible, airworthiness criteria are proposed for consideration.

  12. 77 FR 59732 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-01

    ... condition during the take off phase. For the above described reasons, this AD requires: --repetitive... and Procedures (44 FR 11034, February 26, 1979); 3. Will not affect intrastate aviation in Alaska; and...-040-AD; Amendment 39-17202; AD 2012-19-07] RIN 2120-AA64 Airworthiness Directives; Airbus...

  13. 78 FR 57784 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-20

    ... incorporated by reference at the National Archives and Records Administration (NARA). For information on the... Blagnac Cedex, France; telephone +33 5 61 93 36 96; fax +33 5 61 93 45 80; email airworthiness.A330-A340... apply to the specified products. The NPRM published in the Federal Register on June 21, 2013 (78...

  14. 77 FR 17327 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-26

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2011-1087; Directorate Identifier 2011-NM-032-AD; Amendment 39-16967; AD 2012-04-11] RIN 2120-AA64 Airworthiness Directives; Airbus...

  15. 77 FR 6023 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-07

    ... address the scope of Special Federal Aviation Regulation 88 (SFAR 88) (66 FR 23086, May 7, 2001) and the... Inspection Requirements'' (66 FR 23086, May 7, 2001). In addition to new airworthiness standards for..., SFAR 88 (66 FR 23086, May 7, 2001) requires certain type design (i.e., type certificate (TC)...

  16. 78 FR 40057 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-03

    ... Procedures (44 FR 11034, February 26, 1979); 3. Will not affect intrastate aviation in Alaska; and 4. Will... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Airbus Airplanes... A321 series airplanes. This proposed AD was prompted by reports of certain sliding windows that...

  17. 78 FR 37498 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-21

    ... Procedures (44 FR 11034, February 26, 1979); 3. Will not affect intrastate aviation in Alaska; and 4. Will... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Airbus Airplanes... Freighter, and -300 series airplanes. This proposed AD was prompted by a report that a certain wire...

  18. 76 FR 79560 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-22

    ... ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and 3... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Airbus Airplanes... airplanes; Model A330-223F and -243F airplanes; and Model A340-200, -300, -500, and -600 series...

  19. 77 FR 60331 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-03

    ...; 2. Is not a ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Airbus Airplanes... A321 series airplanes. This proposed AD was prompted by a report of an uncommanded nose landing...

  20. 77 FR 51729 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-27

    ... rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); 3. Will not... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Airbus Airplanes..., A340-200 and A340-300 series airplanes. This proposed AD was prompted by a report that revealed...

  1. 77 FR 66760 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-07

    ... Policies and Procedures (44 FR 11034, February 26, 1979); 3. Will not affect intrastate aviation in Alaska... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Airbus Airplanes...-200, A330-300, A340-200, A340- 300, A340-500, and A340-600 series airplanes. This proposed AD...

  2. 77 FR 66764 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-07

    ... the isolation valve 283HN to Frame (FR) 64, between Stringer (STGR) 33 and STGR 34, was too close to... Procedures (44 FR 11034, February 26, 1979); 3. Will not affect intrastate aviation in Alaska; and 4. Will... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Airbus...

  3. 77 FR 66762 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-07

    ... 12866; 2. Is not a ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Airbus Airplanes..., -304, -322, and -324 airplanes. This proposed AD was prompted by a design review of the fuel...

  4. 34 CFR 644.10 - What assurances must an applicant submit?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false What assurances must an applicant submit? 644.10 Section 644.10 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION EDUCATIONAL OPPORTUNITY CENTERS Assurances § 644.10 What assurances must an applicant submit?...

  5. Producer quality assurance programs.

    PubMed

    Kla, J; Tollefson, L

    1999-03-01

    Essentially all animal commodity organizations have established quality assurance programs designed to ensure food safety and quality. Most of these programs were originally implemented to address problems with veterinary drug residues. Many of the current programs have or plan to include food safety critical control points with specific guidelines on how to control or reduce pathogen load. The continued focus placed on food safety by today's consumer demands that American producers ensure that their commodities are wholesome, safe, and of high quality in order to remain competitive in the global marketplace. Veterinarians should recognize that it is important to encourage food animal producers to participate in quality assurance programs for their clients' economic health and for food safety and protection of public health. Commodities certified as being produced under good production practices or by producers certified as following a recognized and validated quality assurance program often bring a premium price. Also, some slaughter establishments are beginning to require producers to be certified as practicing under a recognized quality assurance program before animals are accepted for processing. This practice is being driven partially by the demands placed on slaughter establishments by the US Department of Agriculture's implementation of the Pathogen Reduction, Hazard Analysis and Critical Control Point Systems regulation. Regardless of why producer trade association quality assurance programs have come into existence, veterinarians should promote the programs as an excellent mechanism to help ensure everyone's goal of a safe, wholesome food supply. PMID:10088219

  6. 75 FR 60667 - Airworthiness Directives; Learjet Inc. Model 45 Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-01

    ... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Learjet Inc. Model... rulemaking (NPRM). SUMMARY: We propose to adopt a new airworthiness directive (AD) for all Model 45 airplanes... AD by November 15, 2010. ADDRESSES: You may send comments by any of the following methods: Federal...

  7. 14 CFR 21.187 - Issue of multiple airworthiness certification.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Issue of multiple airworthiness certification. 21.187 Section 21.187 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Airworthiness Certificates § 21.187...

  8. 78 FR 25662 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-02

    ... Policies and Procedures (44 FR 11034, February 26, 1979), (3) Will not affect intrastate aviation in Alaska... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; The Boeing Company...). SUMMARY: We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model...

  9. 78 FR 72836 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-04

    ... Regulatory Policies and Procedures (44 FR 11034, February 26, 1979), (3) Will not affect intrastate aviation... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; The Boeing Company...). SUMMARY: We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model...

  10. 78 FR 21576 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-11

    ... ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979), (3) Will... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; The Boeing Company...). SUMMARY: We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model...

  11. 77 FR 58301 - Technical Amendment; Airworthiness Standards: Aircraft Engines; Correction

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-20

    .... SUMMARY: The FAA is correcting a technical amendment published on July 5, 2012 (77 FR 39623). In that... Technical Amendment entitled, ``Airworthiness Standards: Aircraft Engine'' (77 FR 39623). In that technical... Administration 14 CFR Part 33 RIN 2120-AF57 Technical Amendment; Airworthiness Standards: Aircraft...

  12. 78 FR 38821 - Airworthiness Directives; Eurocopter France Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-28

    ... reference at the National Archives and Records Administration (NARA). For information on the availability of...-071-AD; Amendment 39-17482; AD 2013-12-04] RIN 2120-AA64 Airworthiness Directives; Eurocopter France... new airworthiness directive (AD) for Eurocopter France Model EC 155B, EC155B1, SA-366G1, SA-365N,...

  13. 78 FR 76984 - Airworthiness Directives; Eurocopter France Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-20

    ... is incorporated by reference at the National Archives and Records Administration (NARA). For...-084-AD; Amendment 39-17696; AD 2013-24-19] RIN 2120-AA64 Airworthiness Directives; Eurocopter France... new airworthiness directive (AD) for Eurocopter France (Eurocopter) Model AS332C, AS332L,...

  14. 78 FR 25367 - Airworthiness Directives; Eurocopter France Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-01

    ... information that is incorporated by reference at the National Archives and Records Administration (NARA). For...-021-AD; Amendment 39-17282; AD 2012-25-01] RIN 2120-AA64 Airworthiness Directives; Eurocopter France... new airworthiness directive (AD) for Eurocopter France Model AS350B, AS350BA, AS350B1,...

  15. 78 FR 16200 - Airworthiness Directives; Eurocopter France Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-14

    ... ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); 3. Will... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Eurocopter France...). SUMMARY: We propose to adopt a new airworthiness directive (AD) for certain Eurocopter France...

  16. 78 FR 23686 - Airworthiness Directives; Eurocopter France Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-22

    ... ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); 3. Will... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Eurocopter France...). SUMMARY: We propose to adopt a new airworthiness directive (AD) for certain Eurocopter France...

  17. 77 FR 36216 - Airworthiness Directives; Eurocopter France Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-18

    ... ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); 3. Will... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Eurocopter France...). SUMMARY: We propose to adopt a new airworthiness directive (AD) for Eurocopter France Model...

  18. 78 FR 63429 - Airworthiness Directives; Eurocopter France Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-24

    ... Policies and Procedures (44 FR 11034, February 26, 1979); 3. Will not affect intrastate aviation in Alaska... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Eurocopter France...). SUMMARY: We propose to adopt a new airworthiness directive (AD) for Eurocopter France Model AS332C,...

  19. 77 FR 58973 - Airworthiness Directives; Eurocopter France Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-25

    ... Policies and Procedures (44 FR 11034, February 26, 1979); 3. Will not affect intrastate aviation in Alaska... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Eurocopter France...). SUMMARY: We propose to adopt a new airworthiness directive (AD) for the Eurocopter France...

  20. 77 FR 20319 - Airworthiness Directives; Eurocopter France Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-04

    ... ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); 3. Will... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Eurocopter France...). SUMMARY: We propose to adopt a new airworthiness directive (AD) for all Eurocopter France (EC) Model...

  1. 77 FR 36220 - Airworthiness Directives; Eurocopter France Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-18

    ... ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); 3. Will... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Eurocopter France...). SUMMARY: We propose to adopt a new airworthiness directive (AD) for all Eurocopter France...

  2. 76 FR 69123 - Airworthiness Directives; Cessna Aircraft Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-08

    ... . SUPPLEMENTARY INFORMATION: Airworthiness Directive 2009-10-09 R2, Amendment 39-16782 (76 FR 53308, August 26... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF TRANSPORTATION...-030-AD; Amendment 39-16782; AD 2009-10-09 R2] RIN 2120-AA64 Airworthiness Directives; Cessna...

  3. 77 FR 65144 - Airworthiness Directives; Embraer S.A. Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-25

    ... 12866; 2. Is not a ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Embraer S.A...). SUMMARY: We propose to adopt a new airworthiness directive (AD) for certain Embraer S.A. Model ERJ 170...

  4. 14 CFR 375.20 - Airworthiness and registration certificates.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... (AVIATION PROCEEDINGS) SPECIAL REGULATIONS NAVIGATION OF FOREIGN CIVIL AIRCRAFT WITHIN THE UNITED STATES Rules Generally Applicable § 375.20 Airworthiness and registration certificates. Foreign civil aircraft... country. However, a foreign civil aircraft may carry, in lieu of such certificate of airworthiness,...

  5. 14 CFR 375.20 - Airworthiness and registration certificates.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... (AVIATION PROCEEDINGS) SPECIAL REGULATIONS NAVIGATION OF FOREIGN CIVIL AIRCRAFT WITHIN THE UNITED STATES Rules Generally Applicable § 375.20 Airworthiness and registration certificates. Foreign civil aircraft... country. However, a foreign civil aircraft may carry, in lieu of such certificate of airworthiness,...

  6. 14 CFR 375.20 - Airworthiness and registration certificates.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... (AVIATION PROCEEDINGS) SPECIAL REGULATIONS NAVIGATION OF FOREIGN CIVIL AIRCRAFT WITHIN THE UNITED STATES Rules Generally Applicable § 375.20 Airworthiness and registration certificates. Foreign civil aircraft... country. However, a foreign civil aircraft may carry, in lieu of such certificate of airworthiness,...

  7. 14 CFR 375.20 - Airworthiness and registration certificates.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... (AVIATION PROCEEDINGS) SPECIAL REGULATIONS NAVIGATION OF FOREIGN CIVIL AIRCRAFT WITHIN THE UNITED STATES Rules Generally Applicable § 375.20 Airworthiness and registration certificates. Foreign civil aircraft... country. However, a foreign civil aircraft may carry, in lieu of such certificate of airworthiness,...

  8. 14 CFR 375.20 - Airworthiness and registration certificates.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... (AVIATION PROCEEDINGS) SPECIAL REGULATIONS NAVIGATION OF FOREIGN CIVIL AIRCRAFT WITHIN THE UNITED STATES Rules Generally Applicable § 375.20 Airworthiness and registration certificates. Foreign civil aircraft... country. However, a foreign civil aircraft may carry, in lieu of such certificate of airworthiness,...

  9. 14 CFR 36.3 - Compatibility with airworthiness requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Compatibility with airworthiness requirements. 36.3 Section 36.3 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT NOISE STANDARDS: AIRCRAFT TYPE AND AIRWORTHINESS CERTIFICATION General §...

  10. 14 CFR 21.273 - Airworthiness certificates other than experimental.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Airworthiness certificates other than experimental. 21.273 Section 21.273 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF... Procedures § 21.273 Airworthiness certificates other than experimental. (a) The manufacturer may issue...

  11. 78 FR 56150 - Airworthiness Directives; Piper Aircraft, Inc. Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-12

    ... final rule is effective September 12, 2013. The effective date for AD 2013-13-01 (78 FR 41277, July 10... . SUPPLEMENTARY INFORMATION: Airworthiness Directive 2013-13-01, Amendment 39-17489 (78 FR 41277, July 10, 2013...-018-AD; Amendment 39-17489; AD 2013-13-01] RIN 2120-AA64 Airworthiness Directives; Piper Aircraft,...

  12. 77 FR 34281 - Airworthiness Directives; Schweizer Aircraft Corporation

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-11

    ...'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); 3. Will not affect... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Schweizer Aircraft...). SUMMARY: This document proposes to adopt a new airworthiness directive (AD) for Schweizer...

  13. Explicate '78: Uncovering the Implicit Assurance Case in DO-178C

    NASA Technical Reports Server (NTRS)

    Holloway, C. Michael

    2015-01-01

    For about two decades, compliance with Software Considerations in Airborne Systems and Equipment Certification (DO-178B/ED-12B) has been the primary means for receiving regulatory approval for using software on commercial airplanes. A new edition of the standard, DO-178C/ED-12C, was published in December 2011, and recognized by regulatory bodies in 2013. The purpose remains unchanged: to provide guidance 'for the production of software for airborne systems and equipment that performs its intended function with a level of confidence in safety that complies with airworthiness requirements.' The text of the guidance does not directly explain how its collection of objectives contributes to achieving this purpose; thus, the assurance case for the document is implicit. This paper presents an explicit assurance case developed as part of research jointly sponsored by the Federal Aviation Administration and the National Aeronautics and Space Administration.

  14. Mission Operations Assurance

    NASA Technical Reports Server (NTRS)

    Faris, Grant

    2012-01-01

    Integrate the mission operations assurance function into the flight team providing: (1) value added support in identifying, mitigating, and communicating the project's risks and, (2) being an essential member of the team during the test activities, training exercises and critical flight operations.

  15. Quality Assurance in Colleges.

    ERIC Educational Resources Information Center

    Dixon, Stella

    This document analyzes the inspection reports of the five further education (FE) colleges in Britain that have achieved a grade of 1 for quality assurance (QA), identifies key lessons for the improvement of programs in other FE colleges, and refers to helpful FE publications. The five colleges consisted of two general FE colleges, one sixth-form…

  16. Quality Assurance for All

    ERIC Educational Resources Information Center

    Cheung, Peter P. T.; Tsui, Cecilia B. S.

    2010-01-01

    For higher education reform, most decision-makers aspire to achieving a higher participation rate and a respectable degree of excellence with diversity at the same time. But very few know exactly how. External quality assurance is a fair basis for differentiation but there can be doubt and resistance in some quarters. Stakeholder interests differ…

  17. Relative Humidity Measurement Assurance Program Results

    NASA Technical Reports Server (NTRS)

    Cerezo, Miguel

    1993-01-01

    During the summer of 1992, the National Conference of Standards Laboratories sponsored a relative humidity measurement assurance program (RHMAP) whose purpose was to enable each participating center to assess the quality of relative humidity calibrations being performed by their respective standards laboratories. This paper presents the data which was submitted by the participants during the first round of the program and shows the multi-laboratory comparisons of the 20%, 50%, and 80% relative humidity meaurements performed.

  18. 78 FR 78705 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-27

    ...We are superseding Airworthiness Directive (AD) 2010-24-07 for all Airbus Model A318 series airplanes, Model A319 series airplanes, Model A320 series airplanes, and Model A321 series airplanes. AD 2010- 24-07 required repetitive inspections of the 80VU rack lower lateral fittings for damage, repetitive inspections of the 80VU rack lower central support for cracking, and corrective action if......

  19. 77 FR 12989 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-05

    ...We are adopting a new airworthiness directive (AD) for certain Airbus Model A330-200 series airplanes; Model A330-300 series airplanes; Model A340-200 series airplanes; and Model A340-300 series airplanes. This AD was prompted by a report that three failures of the retraction bracket occurred during fatigue testing before the calculated life limit of the main landing gear (MLG). This AD......

  20. 78 FR 29666 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-21

    ...We propose to adopt a new airworthiness directive (AD) for certain Airbus Model A330-200 and -300 series airplanes; Model A340-200 and -300 series airplanes; and Model A340-541 and -642 airplanes. This proposed AD was prompted by reports of wing tip brakes (WTBs) losing their braking function in service due to heavy wear on the brake discs. WTBs are designed to stop and hold the mechanical......

  1. 77 FR 26996 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-08

    ...We propose to adopt a new airworthiness directive (AD) for certain Airbus Model A320-214 and-232 airplanes. This proposed AD was prompted by reports that medium-head fasteners were installed in lieu of shear-head fasteners on a certain upper panel which manufacturer fatigue and damage tolerance analyses demonstrated could have an affect on panel fatigue life. This proposed AD would require......

  2. 78 FR 78294 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-26

    ...We propose to adopt a new airworthiness directive (AD) for certain Airbus Model A330-200, A330-200 Freighter, and A330-300 series airplanes; and Model A340-200, A340-300, A340-500, and A340-600 series airplanes. This proposed AD was prompted by the failure of the generator control unit-constant speed motor/generator (GCU-CSM/G) during a final assembly operational test. This proposed AD would......

  3. 77 FR 65812 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-31

    ...We are adopting a new airworthiness directive (AD) for all Airbus Model A330-200 freighter series airplanes; Model A330-200 and - 300 series airplanes; and Model A340-200 and -300 series airplanes. This AD was prompted by reports of ram air turbine (RAT) pump failure. This AD requires inspecting the RAT pump anti-stall valve for correct setting, re-identifying the RAT pump, performing a......

  4. 77 FR 40830 - Airworthiness Directives; Airbus Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-11

    ...We propose to adopt a new airworthiness directive (AD) for all Airbus Model A330-200 freighter series airplanes; Model A330-200 and - 300 series airplanes; and Model A340-200 and -300 series airplanes. This proposed AD was prompted by reports of ram air turbine (RAT) pump failure. This proposed AD would require inspecting the RAT pump anti- stall valve for correct setting, re-identifying the......

  5. Quality Assurance in Nursing Homes.

    ERIC Educational Resources Information Center

    Balgopal, Pallassana R.; And Others

    This manual, developed for the nursing home employee, examines the concept of quality assurance in nursing homes, describes the benefits of an effective quality assurance program, and provides guidelines to aid nursing homes in developing an appropriate quality assurance program. After a brief introduction, a working definition of quality…

  6. NASA assurance terms and definitions

    NASA Technical Reports Server (NTRS)

    1993-01-01

    This publication provides a compendium of commonly used safety, reliability, maintainability, and quality assurance (SRM&QA) definitions to ensure standardized assurance communications among NASA Field Installations, Headquarters, and contractors. This list of standard assurance terms and definitions shall be utilized by all NASA organizations and contractors. Program/project tailoring of these definitions may be permitted for specific program applications.

  7. Quality Assurance for University Teaching.

    ERIC Educational Resources Information Center

    Ellis, Roger, Ed.

    This book, written from a British perspective, presents 17 papers on quality assurance in teaching at the university level. The first eight papers address issues of assuring quality and include: (1) "Quality Assurance for University Teaching; Issues and Approaches" (Roger Ellis); (2) "A British Standard for University Teaching?" (Roger Ellis); (3)…

  8. Assessment of the NASA Flight Assurance Review Program

    NASA Technical Reports Server (NTRS)

    Holmes, J.; Pruitt, G.

    1983-01-01

    The NASA flight assurance review program to develop minimum standard guidelines for flight assurance reviews was assessed. Documents from NASA centers and NASA headquarters to determine current design review practices and procedures were evaluated. Six reviews were identified for the recommended minimum. The practices and procedures used at the different centers to incorporate the most effective ones into the minimum standard review guidelines were analyzed and guidelines for procedures, personnel and responsibilies, review items/data checklist, and feedback and closeout were defined. The six recommended reviews and the minimum standards guidelines developed for flight assurance reviews are presented. Observations and conclusions for further improving the NASA review and quality assurance process are outlined.

  9. Software Quality Assurance Metrics

    NASA Technical Reports Server (NTRS)

    McRae, Kalindra A.

    2004-01-01

    Software Quality Assurance (SQA) is a planned and systematic set of activities that ensures conformance of software life cycle processes and products conform to requirements, standards and procedures. In software development, software quality means meeting requirements and a degree of excellence and refinement of a project or product. Software Quality is a set of attributes of a software product by which its quality is described and evaluated. The set of attributes includes functionality, reliability, usability, efficiency, maintainability, and portability. Software Metrics help us understand the technical process that is used to develop a product. The process is measured to improve it and the product is measured to increase quality throughout the life cycle of software. Software Metrics are measurements of the quality of software. Software is measured to indicate the quality of the product, to assess the productivity of the people who produce the product, to assess the benefits derived from new software engineering methods and tools, to form a baseline for estimation, and to help justify requests for new tools or additional training. Any part of the software development can be measured. If Software Metrics are implemented in software development, it can save time, money, and allow the organization to identify the caused of defects which have the greatest effect on software development. The summer of 2004, I worked with Cynthia Calhoun and Frank Robinson in the Software Assurance/Risk Management department. My task was to research and collect, compile, and analyze SQA Metrics that have been used in other projects that are not currently being used by the SA team and report them to the Software Assurance team to see if any metrics can be implemented in their software assurance life cycle process.

  10. Helical tomotherapy quality assurance.

    PubMed

    Balog, John; Soisson, Emilie

    2008-01-01

    Helical tomotherapy uses a dynamic delivery in which the gantry, treatment couch, and multileaf collimator leaves are all in motion during treatment. This results in highly conformal radiotherapy, but the complexity of the delivery is partially hidden from the end-user because of the extensive integration and automation of the tomotherapy control systems. This presents a challenge to the medical physicist who is expected to be both a system user and an expert, capable of verifying relevant aspects of treatment delivery. A related issue is that a clinical tomotherapy planning system arrives at a customer's site already commissioned by the manufacturer, not by the clinical physicist. The clinical physicist and the manufacturer's representative verify the commissioning at the customer site before acceptance. Theoretically, treatment could begin immediately after acceptance. However, the clinical physicist is responsible for the safe and proper use of the machine. In addition, the therapists and radiation oncologists need to understand the important machine characteristics before treatment can proceed. Typically, treatment begins about 2 weeks after acceptance. This report presents an overview of the tomotherapy system. Helical tomotherapy has unique dosimetry characteristics, and some of those features are emphasized. The integrated treatment planning, delivery, and patient-plan quality assurance process is described. A quality assurance protocol is proposed, with an emphasis on what a clinical medical physicist could and should check. Additionally, aspects of a tomotherapy quality assurance program that could be checked automatically and remotely because of its inherent imaging system and integrated database are discussed. PMID:18406907

  11. Helical Tomotherapy Quality Assurance

    SciTech Connect

    Balog, John Soisson, Emilie

    2008-05-01

    Helical tomotherapy uses a dynamic delivery in which the gantry, treatment couch, and multileaf collimator leaves are all in motion during treatment. This results in highly conformal radiotherapy, but the complexity of the delivery is partially hidden from the end-user because of the extensive integration and automation of the tomotherapy control systems. This presents a challenge to the medical physicist who is expected to be both a system user and an expert, capable of verifying relevant aspects of treatment delivery. A related issue is that a clinical tomotherapy planning system arrives at a customer's site already commissioned by the manufacturer, not by the clinical physicist. The clinical physicist and the manufacturer's representative verify the commissioning at the customer site before acceptance. Theoretically, treatment could begin immediately after acceptance. However, the clinical physicist is responsible for the safe and proper use of the machine. In addition, the therapists and radiation oncologists need to understand the important machine characteristics before treatment can proceed. Typically, treatment begins about 2 weeks after acceptance. This report presents an overview of the tomotherapy system. Helical tomotherapy has unique dosimetry characteristics, and some of those features are emphasized. The integrated treatment planning, delivery, and patient-plan quality assurance process is described. A quality assurance protocol is proposed, with an emphasis on what a clinical medical physicist could and should check. Additionally, aspects of a tomotherapy quality assurance program that could be checked automatically and remotely because of its inherent imaging system and integrated database are discussed.

  12. Airworthiness verification of an airborne telescope in practice

    NASA Astrophysics Data System (ADS)

    Dreger, Hartmut; Bremers, Eckhard; Kuehn, Juergen; Eisentraeger, Peter

    2003-02-01

    The SOFIA Telescope is part of the outer hull of the pressurized passenger cabin of the SOFIA aircraft, in which the aircraft crew, the astronomers and their guests are located during flight. Therefore the telescope - including the science instrument - is an airworthiness relevant component of the observatory and has to fulfill airworthiness standards ac-cording the Federal Aviation Authority. The airworthiness issues were main drivers in the process of design, manufacturing, quality control, testing and documentation. The paper describes the experience gotten during this troublesome, exciting and costly job.

  13. The quality assurance liaison: Combined technical and quality assurance support

    NASA Astrophysics Data System (ADS)

    Bolivar, S. L.; Day, J. L.

    1993-03-01

    The role of the quality assurance liaison, the responsibilities of this position, and the evolutionary changes in duties over the last six years are described. The role of the quality assurance liaison has had a very positive impact on the Los Alamos Yucca Mountain Site Characterization (YW) quality assurance program. Having both technical and quality assurance expertise, the quality assurance liaisons are able to facilitate communications with scientists on quality assurance issues and requirements, thereby generating greater productivity in scientific investigations. The quality assurance liaisons help ensure that the scientific community knows and implements existing requirements, is aware of new or changing regulations, and is able to conduct scientific work within Project requirements. The influence of the role of the quality assurance liaison can be measured by an overall improvement in attitude of the staff regarding quality assurance requirements and improved job performance, as well as a decrease in deficiencies identified during both internal and external audits and surveillances. This has resulted in a more effective implementation of quality assurance requirements.

  14. 14 CFR 39.5 - When does FAA issue airworthiness directives?

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false When does FAA issue airworthiness directives? 39.5 Section 39.5 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS DIRECTIVES § 39.5 When does FAA issue airworthiness directives? FAA...

  15. 14 CFR 21.184 - Issue of special airworthiness certificates for primary category aircraft.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Issue of special airworthiness certificates for primary category aircraft. 21.184 Section 21.184 Aeronautics and Space FEDERAL AVIATION... Airworthiness Certificates § 21.184 Issue of special airworthiness certificates for primary category...

  16. 14 CFR Appendix A to Part 33 - Instructions for Continued Airworthiness

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Instructions for Continued Airworthiness A Appendix A to Part 33 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES Pt. 33, App. A Appendix A to Part 33—Instructions for Continued Airworthiness a33.1general...

  17. 78 FR 70198 - Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-25

    ...-15-AD; Amendment 39-17656; AD 2013-23-01] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce... rule. SUMMARY: We are adopting a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd... airworthiness directive (AD): 2013-23-01 Rolls-Royce Deutschland Ltd & Co KG: Amendment 39-17656; Docket No....

  18. 14 CFR 39.5 - When does FAA issue airworthiness directives?

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false When does FAA issue airworthiness directives? 39.5 Section 39.5 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS DIRECTIVES § 39.5 When does FAA issue airworthiness directives? FAA...

  19. 14 CFR 39.11 - What actions do airworthiness directives require?

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false What actions do airworthiness directives require? 39.11 Section 39.11 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS DIRECTIVES § 39.11 What actions do airworthiness directives...

  20. Understanding and Evaluating Assurance Cases

    NASA Technical Reports Server (NTRS)

    Rushby, John; Xu, Xidong; Rangarajan, Murali; Weaver, Thomas L.

    2015-01-01

    Assurance cases are a method for providing assurance for a system by giving an argument to justify a claim about the system, based on evidence about its design, development, and tested behavior. In comparison with assurance based on guidelines or standards (which essentially specify only the evidence to be produced), the chief novelty in assurance cases is provision of an explicit argument. In principle, this can allow assurance cases to be more finely tuned to the specific circumstances of the system, and more agile than guidelines in adapting to new techniques and applications. The first part of this report (Sections 1-4) provides an introduction to assurance cases. Although this material should be accessible to all those with an interest in these topics, the examples focus on software for airborne systems, traditionally assured using the DO-178C guidelines and its predecessors. A brief survey of some existing assurance cases is provided in Section 5. The second part (Section 6) considers the criteria, methods, and tools that may be used to evaluate whether an assurance case provides sufficient confidence that a particular system or service is fit for its intended use. An assurance case cannot provide unequivocal "proof" for its claim, so much of the discussion focuses on the interpretation of such less-than-definitive arguments, and on methods to counteract confirmation bias and other fallibilities in human reasoning.

  1. 77 FR 12991 - Airworthiness Directives; Robinson Helicopter Company Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-05

    ...). SUPPLEMENTARY INFORMATION: Airworthiness Directive 2011-12-10, Amendment 39-16717 (76 FR 35330, June 17, 2011.... That AD applies to Robinson Helicopter Company (Robinson) Model R22, R22 Alpha, R22 Beta, R22...

  2. 77 FR 39623 - Airworthiness Standards: Aircraft Engines; Technical Amendment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-05

    ... Federal Aviation Administration 14 CFR Part 33 Airworthiness Standards: Aircraft Engines; Technical Amendment AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule; technical amendment.... ] DATES: This amendment becomes effective July 5, 2012. FOR FURTHER INFORMATION CONTACT: For...

  3. Program plan to develop airworthiness standards for STOL aircraft

    NASA Technical Reports Server (NTRS)

    Cayot, J. E.; Chubboy, R. A.; Hynes, C. S.

    1972-01-01

    A program plan to develop criteria for airworthiness standards for STOL transport aircraft is presented. Initially, three different STOL concepts are to be examined with a goal to arrive at a generalized set of standards. The Breguet 941 deflected-slipstream STOL has been initially evaluated on a piloted motion simulator and in flight. Confidence in establishing criteria for airworthiness standards for STOL transport aircraft has been obtained from these studies.

  4. Assured Crew Return Vehicle

    NASA Technical Reports Server (NTRS)

    Stone, D. A.; Craig, J. W.; Drone, B.; Gerlach, R. H.; Williams, R. J.

    1991-01-01

    The developmental status is discussed regarding the 'lifeboat' vehicle to enhance the safety of the crew on the Space Station Freedom (SSF). NASA's Assured Crew Return Vehicle (ACRV) is intended to provide a means for returning the SSF crew to earth at all times. The 'lifeboat' philosophy is the key to managing the development of the ACRV which further depends on matrixed support and total quality management for implementation. The risk of SSF mission scenarios are related to selected ACRV mission requirements, and the system and vehicle designs are related to these precepts. Four possible ACRV configurations are mentioned including the lifting-body, Apollo shape, Discoverer shape, and a new lift-to-drag concept. The SCRAM design concept is discussed in detail with attention to the 'lifeboat' philosophy and requirements for implementation.

  5. Construction quality assurance report

    SciTech Connect

    Roscha, V.

    1994-09-08

    This report provides a summary of the construction quality assurance (CQA) observation and test results, including: The results of the geosynthetic and soil materials conformance testing. The observation and testing results associates with the installation of the soil liners. The observation and testing results associated with the installation of the HDPE geomembrane liner systems. The observation and testing results associated with the installation of the leachate collection and removal systems. The observation and testing results associated with the installation of the working surfaces. The observation and testing results associated with in-plant manufacturing process. Summary of submittal reviews by Golder Construction Services, Inc. The submittal and certification of the piping material specifications. The observation and verification associated of the Acceptance Test Procedure results of the operational equipment functions. Summary of the ECNs which are incorporated into the project.

  6. Quality Assurance and Nursing Education

    ERIC Educational Resources Information Center

    Strauss, Mary Beth

    1978-01-01

    Preparation for quality assurance in nursing care must begin in basic nursing education, continue through the graduate and doctoral levels, and be provided for practicing nurses through continuing education activities, according to the author. She discusses the meaning of quality assurance and its integration into the nursing curriculum. (MF)

  7. Recent Trends in Quality Assurance

    ERIC Educational Resources Information Center

    Amaral, Alberto; Rosa, Maria Joao

    2010-01-01

    In this paper we present a brief description of the evolution of quality assurance in Europe, paying particular attention to its relationship to the rising loss of trust in higher education institutions. We finalise by analysing the role of the European Commission in the setting up of new quality assurance mechanisms that tend to promote…

  8. Quality Assurance in Education Systems.

    ERIC Educational Resources Information Center

    Cuttance, Peter

    1994-01-01

    This paper provides an analysis of approaches to quality assurance and of the management of quality in general management literature and considers its application to public education systems. Key components of a fully integrated approach to quality assurance and quality management for school systems are listed. (SLD)

  9. POLLUTION PREVENTION OPPORTUNITY ASSESSMENT - UNITED STATES COAST GUARD AVIATION TRAINING CENTER, MOBILE, ALABAMA

    EPA Science Inventory

    This report summarizes a pollution prevention opportunity assessment of the U.S. Coast Guard (USCG) Aviation Training Center (ATC) in Mobile, Alabama. he ATC maintains the readiness and airworthiness of Dauphin and Jayhawk Helicopters and Falcon Jets used in training and search a...

  10. Overseeing One-Stops: A WIB Member's Guide to Quality Assurance. Workforce Board Development Series.

    ERIC Educational Resources Information Center

    2000

    This guide is intended to give workforce investment boards (WIBs) a practical framework for overseeing the performance of one-stop career centers. The introduction presents background information on a proposed quality assurance framework and the guide's format and development. The first two sections explain the importance of quality assurance to…

  11. 42 CFR 441.474 - Quality assurance and improvement plan.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 4 2011-10-01 2011-10-01 false Quality assurance and improvement plan. 441.474 Section 441.474 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS SERVICES: REQUIREMENTS AND LIMITS APPLICABLE TO SPECIFIC SERVICES Optional Self-Directed...

  12. 42 CFR 441.474 - Quality assurance and improvement plan.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Quality assurance and improvement plan. 441.474 Section 441.474 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS SERVICES: REQUIREMENTS AND LIMITS APPLICABLE TO SPECIFIC SERVICES Optional Self-Directed...

  13. Innovative Model for Information Assurance Curriculum: A Teaching Hospital

    ERIC Educational Resources Information Center

    Goel, Sanjay; Pon, Damira; Bloniarz, Peter; Bangert-Drowns, Robert; Berg, George; Delio, Vince; Iwan, Laura; Hurbanek, Thomas; Schuman, Sandoor P.; Gangolly, Jagdish; Baykal, Adnan; Hobbs, Jon

    2006-01-01

    A novel idea for information security education created by the New York State Center for Information Forensics and Assurance (CIFA) is presented. This new approach incorporates a teaching hospital model originally developed for medical training. In this model, information security problems from industry and government are solved and abstracted…

  14. 42 CFR 457.130 - Civil rights assurance.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Civil rights assurance. 457.130 Section 457.130 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STATE CHILDREN'S HEALTH INSURANCE PROGRAMS (SCHIPs) ALLOTMENTS AND GRANTS TO STATES Introduction; State Plans for Child Health Insurance...

  15. 42 CFR 441.585 - Quality assurance system.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 4 2014-10-01 2014-10-01 false Quality assurance system. 441.585 Section 441.585 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Home and Community-Based Attendant Services and Supports State Plan Option (Community First...

  16. 42 CFR 441.585 - Quality assurance system.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 4 2012-10-01 2012-10-01 false Quality assurance system. 441.585 Section 441.585 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Home and Community-Based Attendant Services and Supports State Plan Option (Community First...

  17. [Ballistic quality assurance].

    PubMed

    Cassol, E; Bonnet, J; Porcheron, D; Mazeron, J-J; Peiffert, D; Alapetite, C

    2012-06-01

    This review describes the ballistic quality assurance for stereotactic intracranial irradiation treatments delivered with Gamma Knife® either dedicated or adapted medical linear accelerators. Specific and periodic controls should be performed in order to check the mechanical stability for both irradiation and collimation systems. If this step remains under the responsibility of the medical physicist, it should be done in agreement with the manufacturer's technical support. At this time, there are no recent published guidelines. With technological developments, both frequency and accuracy should be assessed in each institution according to the treatment mode: single versus hypofractionnated dose, circular collimator versus micro-multileaf collimators. In addition, "end-to-end" techniques are mandatory to find the origin of potential discrepancies and to estimate the global ballistic accuracy of the delivered treatment. Indeed, they include frames, non-invasive immobilization devices, localizers, multimodal imaging for delineation and in-room positioning imaging systems. The final precision that could be reasonably achieved is more or less 1mm. PMID:22632786

  18. Process measurement assurance program

    SciTech Connect

    Pettit, R.B.

    1996-05-01

    This paper describes a new method for determining, improving, and controlling the measurement process errors (or measurement uncertainty) of a measurement system used to monitor product as it is manufactured. The method is called the Process Measurement Assurance Program (PMAP). It integrates metrology early into the product realization process and is a step beyond statistical process control (SPC), which monitors only the product. In this method, a control standard is used to continuously monitor the status of the measurement system. Analysis of the control standard data allow the determination of the measurement error inherent in the product data and allow one to separate the variability in the manufacturing process from variability in the measurement process. These errors can be then associated with either the measurement equipment, variability of the measurement process, operator bias, or local environmental effects. Another goal of PMAP is to determine appropriate re-calibration intervals for the measurement system, which may be significantly longer or shorter than the interval typically assigned by the calibration organization.

  19. Engage States on Energy Assurance and Energy Security

    SciTech Connect

    Kara Colton; John Ratliff; Sue Gander; Darren Springer; Greg Dierkers

    2008-09-30

    The NGA Center's 'Engaging States on Energy Security and Energy Assurance' has been successful in achieving the stated project purposes and objectives both in the initial proposal as well as in subsequent revisions to it. Our activities, which involve the NGA Center for Best Practices (The NGA Center) Homeland Security and Technology Division, included conducting tabletop exercises to help federal and state homeland security and energy officials determine roles and actions for various emergency scenarios. This included efforts to education state official on developing an energy assurance plan, harmonizing approaches to controlling price volatility, implementing reliability standards, understanding short and long-term energy outlooks and fuel diversification, and capitalizing on DOE's research and development activities. Regarding our work on energy efficiency and renewable energy, the NGA Center's Environment, Energy and Natural Resources Division hosted three workshops which engaged states on the clean energy and alternative transportation fuel and also produced several reports on related topics. In addition, we convened 18 meetings, via conference call, of the Energy Working Group. Finally, through the NGA Center's Front and Center newsletter articles, the NGA Center disseminated promising practices to a wide audience of state policymakers. The NGA Center also hosted a number of workshops and web conferences designed to directly engage states on the deliverables under this Cooperative Agreement. Through the NGA Center's written products and newsletter articles, the NGA Center was able to disseminate promising practices to a wide audience of state policymakers.

  20. BUILDING "BRIDGES" WITH QUALITY ASSURANCE

    EPA Science Inventory

    The papr describes how, rather than building "bridges" across centuries, quality assurance (QA) personnel have the opportunity to build bridges across technical disciplines, between public and private organizations, and between different QA groups. As reviewers and auditors of a...

  1. Automating linear accelerator quality assurance

    SciTech Connect

    Eckhause, Tobias; Thorwarth, Ryan; Moran, Jean M.; Al-Hallaq, Hania; Farrey, Karl; Ritter, Timothy; DeMarco, John; Pawlicki, Todd; Kim, Gwe-Ya; Popple, Richard; Sharma, Vijeshwar; Park, SungYong; Perez, Mario; Booth, Jeremy T.

    2015-10-15

    Purpose: The purpose of this study was 2-fold. One purpose was to develop an automated, streamlined quality assurance (QA) program for use by multiple centers. The second purpose was to evaluate machine performance over time for multiple centers using linear accelerator (Linac) log files and electronic portal images. The authors sought to evaluate variations in Linac performance to establish as a reference for other centers. Methods: The authors developed analytical software tools for a QA program using both log files and electronic portal imaging device (EPID) measurements. The first tool is a general analysis tool which can read and visually represent data in the log file. This tool, which can be used to automatically analyze patient treatment or QA log files, examines the files for Linac deviations which exceed thresholds. The second set of tools consists of a test suite of QA fields, a standard phantom, and software to collect information from the log files on deviations from the expected values. The test suite was designed to focus on the mechanical tests of the Linac to include jaw, MLC, and collimator positions during static, IMRT, and volumetric modulated arc therapy delivery. A consortium of eight institutions delivered the test suite at monthly or weekly intervals on each Linac using a standard phantom. The behavior of various components was analyzed for eight TrueBeam Linacs. Results: For the EPID and trajectory log file analysis, all observed deviations which exceeded established thresholds for Linac behavior resulted in a beam hold off. In the absence of an interlock-triggering event, the maximum observed log file deviations between the expected and actual component positions (such as MLC leaves) varied from less than 1% to 26% of published tolerance thresholds. The maximum and standard deviations of the variations due to gantry sag, collimator angle, jaw position, and MLC positions are presented. Gantry sag among Linacs was 0.336 ± 0.072 mm. The

  2. Proceedings of the FAA-NASA Symposium on the Continued Airworthiness of Aircraft Structures. Volume 1

    NASA Technical Reports Server (NTRS)

    Bigelow, Catherine A. (Compiler)

    1997-01-01

    This publication contains the fifty-two technical papers presented at the FAA-NASA Symposium on the Continued Airworthiness of Aircraft Structures. The symposium, hosted by the FAA Center of Excellence for Computational Modeling of Aircraft Structures at Georgia Institute of Technology, was held to disseminate information on recent developments in advanced technologies to extend the life of high-time aircraft and design longer-life aircraft. Affiliations of the participants included 33% from government agencies and laboratories, 19% from academia, and 48% from industry; in all 240 people were in attendance. Technical papers were selected for presentation at the symposium, after a review of extended abstracts received by the Organizing Committee from a general call for papers.

  3. Proceedings of the FAA-NASA Symposium on the Continued Airworthiness of Aircraft Structures. Volume 2

    NASA Technical Reports Server (NTRS)

    Bigelow, Catherine A. (Compiler)

    1997-01-01

    This publication contains the fifty-two technical papers presented at the FAA-NASA Symposium on the Continued Airworthiness of Aircraft Structures. The symposium, hosted by the FAA Center of Excellence for Computational Modeling of Aircraft Structures at Georgia Institute of Technology, was held to disseminate information on recent developments in advanced technologies to extend the life of high-time aircraft and design longer-life aircraft. Affiliations of the participants included 33% from government agencies and laboratories, 19% from academia, and 48% from industry; in all 240 people were in attendance. Technical papers were selected for presentation at the symposium, after a review of extended abstracts received by the Organizing Committee from a general call for papers.

  4. Ground-simulation investigations of VTOL airworthiness criteria for terminal-area operations

    NASA Technical Reports Server (NTRS)

    Lebacqz, J. V.; Decker, W. A.; Alderete, T. S.; Scott, B. C.; Harper, P. J. G.; Chung, W. W.

    1990-01-01

    Several ground-based simulation experiments undertaken to investigate concerns related to tilt-rotor aircraft airworthiness were conducted. The experiments were conducted on the National Aeronautics and Space Administration (NASA) Ames Research Center's Vertical Motion Simulator, which permits simulation of a wide variety of aircraft with a high degree of fidelity of motion cueing. Variations in conversion/deceleration profile, type of augmentation or automation, level of display assistance, and meteorological conditions were considered in the course of the experiments. Certification pilots from the Federal Aviation Administration (FAA) and the Civil Aviation Authority (CAA) participated, in addition to NASA research pilots. The setup of these experiments on the simulator is summarized, and some of the results highlighted.

  5. Ground-simulation investigation of VTOL instrument flight rules airworthiness criteria

    NASA Technical Reports Server (NTRS)

    Lebacqz, J. V.; Scott, B. C.

    1984-01-01

    A two-part ground-simulation investigation of VTOL terminal-area operations, conducted as part of a joint NASA/FAA program to develop airworthiness criteria for this class of vehicle, is described. The baseline vehicle selected for the simulations was a generalized version of the XV-15 tilt-rotor mathematical model, which was modified to permit generic variations in forces or moments or both with power or configuration changes. Additionally, changes to wing area and rotor-blade chord were considered as a means of modifying the allowable thrust-angle versus speed relationships (the conversion corridor). The Vertical Motion Simulator at Ames Research Center was used in the experiment. Four engineering test pilots conducted over 200 piloted evaluations examining the influence of the experimental variables on their ability to perform terminal-area operations.

  6. 76 FR 59013 - Airworthiness Directives; Rolls-Royce plc (RR) RB211-Trent 800 Series Turbofan Engines

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-23

    ...-30-AD; Amendment 39-16657; AD 2011-08-07] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce plc (RR... . SUPPLEMENTARY INFORMATION: Airworthiness Directive 2011-08-07, Amendment 39-16657 (76 FR 24798, May 3,...

  7. 10 CFR 71.37 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Quality assurance. 71.37 Section 71.37 Energy NUCLEAR... Package Approval § 71.37 Quality assurance. (a) The applicant shall describe the quality assurance program... quality assurance program that are applicable to the particular package design under...

  8. 24 CFR 8.50 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Assurances required. 8.50 Section 8... URBAN DEVELOPMENT Enforcement § 8.50 Assurances required. (a) Assurances. An applicant for Federal financial assistance for a program or activity to which this part applies shall submit an assurance to...

  9. Thoughts on Internal and External Quality Assurance

    ERIC Educational Resources Information Center

    Zhang, Jianxin

    2012-01-01

    Quality assurance of higher education is made up of two parts: internal quality assurance (IQA) and external quality assurance (EQA). Both belong to a union of the coexistence and balance of yin and yang. But in reality there exists a paradox of "confusion of quality assurance (QA) subject consciousness, singularity of social QA and lack of QA…

  10. 45 CFR 605.5 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 3 2010-10-01 2010-10-01 false Assurances required. 605.5 Section 605.5 Public... Provisions § 605.5 Assurances required. (a) Assurances. Recipients of Federal financial assistance to which... structures on the property, the assurance will obligate the recipient or, in the case of a...

  11. 15 CFR 8b.5 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Assurances required. 8b.5 Section 8b.5... Assurances required. (a) Assurances. An applicant for Federal financial assistance to which this part applies shall submit an assurance, on a form specified by the Secretary, that the program or activity will...

  12. 29 CFR 32.5 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Assurances required. 32.5 Section 32.5 Labor Office of the... FINANCIAL ASSISTANCE General Provisions § 32.5 Assurances required. (a) Assurances. An applicant for Federal financial assistance to which this part applies shall submit an assurance, on a form specified by...

  13. 34 CFR 110.23 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Assurances required. 110.23 Section 110.23 Education... Recipients § 110.23 Assurances required. (a) Assurances. An applicant for Federal financial assistance to which these regulations apply shall sign a written assurance, on a form specified by ED, that...

  14. 45 CFR 1170.51 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 3 2010-10-01 2010-10-01 false Assurances required. 1170.51 Section 1170.51... ASSISTED PROGRAMS OR ACTIVITIES Enforcement § 1170.51 Assurances required. (a) Assurances. An applicant for Federal financial assistance to which this part applies shall submit an assurance, on a form specified...

  15. 14 CFR 1251.104 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Assurances required. 1251.104 Section 1251... HANDICAP General Provisions § 1251.104 Assurances required. (a) Assurances. An applicant for Federal financial assistance to which this part applies shall submit an assurance, on a form specified by...

  16. 34 CFR 104.5 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Assurances required. 104.5 Section 104.5 Education... Provisions § 104.5 Assurances required. (a) Assurances. An applicant for Federal financial assistance to which this part applies shall submit an assurance, on a form specified by the Assistant Secretary,...

  17. 10 CFR 71.37 - Quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance. 71.37 Section 71.37 Energy NUCLEAR... Package Approval § 71.37 Quality assurance. (a) The applicant shall describe the quality assurance program... quality assurance program that are applicable to the particular package design under...

  18. 14 CFR 21.190 - Issue of a special airworthiness certificate for a light-sport category aircraft.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... certificate for a light-sport category aircraft. 21.190 Section 21.190 Aeronautics and Space FEDERAL AVIATION... Airworthiness Certificates § 21.190 Issue of a special airworthiness certificate for a light-sport category aircraft. (a) Purpose. The FAA issues a special airworthiness certificate in the light-sport category...

  19. 14 CFR 21.190 - Issue of a special airworthiness certificate for a light-sport category aircraft.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... certificate for a light-sport category aircraft. 21.190 Section 21.190 Aeronautics and Space FEDERAL AVIATION... Airworthiness Certificates § 21.190 Issue of a special airworthiness certificate for a light-sport category aircraft. (a) Purpose. The FAA issues a special airworthiness certificate in the light-sport category...

  20. 14 CFR 21.190 - Issue of a special airworthiness certificate for a light-sport category aircraft.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... certificate for a light-sport category aircraft. 21.190 Section 21.190 Aeronautics and Space FEDERAL AVIATION... Airworthiness Certificates § 21.190 Issue of a special airworthiness certificate for a light-sport category aircraft. (a) Purpose. The FAA issues a special airworthiness certificate in the light-sport category...

  1. 14 CFR 21.190 - Issue of a special airworthiness certificate for a light-sport category aircraft.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... certificate for a light-sport category aircraft. 21.190 Section 21.190 Aeronautics and Space FEDERAL AVIATION... Airworthiness Certificates § 21.190 Issue of a special airworthiness certificate for a light-sport category aircraft. (a) Purpose. The FAA issues a special airworthiness certificate in the light-sport category...

  2. 14 CFR 21.190 - Issue of a special airworthiness certificate for a light-sport category aircraft.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... certificate for a light-sport category aircraft. 21.190 Section 21.190 Aeronautics and Space FEDERAL AVIATION... Airworthiness Certificates § 21.190 Issue of a special airworthiness certificate for a light-sport category aircraft. (a) Purpose. The FAA issues a special airworthiness certificate in the light-sport category...

  3. A STOL airworthiness investigation using a simulation of a deflected slipstream transport. Volume 1: Summary of results and airworthiness implications

    NASA Technical Reports Server (NTRS)

    Stapleford, R. L.; Heffley, R. K.; Rumold, R. C.; Hynes, C. S.; Scott, B. C.

    1974-01-01

    A simulator study of short takeoff and landing (STOL) aircraft was conducted using a model of a deflected slipstream transport aircraft. The subjects considered are: (1) the approach, (2) flare and landing, (3) go-around, and (4) takeoff phases of flight. The results are summarized and possible implications with regard to airworthiness criteria are discussed. A data base is provided for future STOL airworthiness requirements and a preliminary indication of potential problem areas is developed. Comparison of the simulation results with various proposed STOL criteria indicates significant deficiencies in many of these criteria.

  4. Modernization of software quality assurance

    NASA Technical Reports Server (NTRS)

    Bhaumik, Gokul

    1988-01-01

    The customers satisfaction depends not only on functional performance, it also depends on the quality characteristics of the software products. An examination of this quality aspect of software products will provide a clear, well defined framework for quality assurance functions, which improve the life-cycle activities of software development. Software developers must be aware of the following aspects which have been expressed by many quality experts: quality cannot be added on; the level of quality built into a program is a function of the quality attributes employed during the development process; and finally, quality must be managed. These concepts have guided our development of the following definition for a Software Quality Assurance function: Software Quality Assurance is a formal, planned approach of actions designed to evaluate the degree of an identifiable set of quality attributes present in all software systems and their products. This paper is an explanation of how this definition was developed and how it is used.

  5. Waste Management Quality Assurance Plan

    SciTech Connect

    Waste Management Group

    2006-08-14

    The WMG QAP is an integral part of a management system designed to ensure that WMG activities are planned, performed, documented, and verified in a manner that assures a quality product. A quality product is one that meets all waste acceptance criteria, conforms to all permit and regulatory requirements, and is accepted at the offsite treatment, storage, and disposal facility. In addition to internal processes, this QA Plan identifies WMG processes providing oversight and assurance to line management that waste is managed according to all federal, state, and local requirements for waste generator areas. A variety of quality assurance activities are integral to managing waste. These QA functions have been identified in the relevant procedures and in subsequent sections of this plan. The WMG QAP defines the requirements of the WMG quality assurance program. These requirements are derived from Department of Energy (DOE) Order 414.1C, Quality Assurance, Contractor Requirements Document, the LBNL Operating and Assurance Program Plan (OAP), and other applicable environmental compliance documents. The QAP and all associated WMG policies and procedures are periodically reviewed and revised, as necessary, to implement corrective actions, and to reflect changes that have occurred in regulations, requirements, or practices as a result of feedback on work performed or lessons learned from other organizations. The provisions of this QAP and its implementing documents apply to quality-affecting activities performed by the WMG; WMG personnel, contractors, and vendors; and personnel from other associated LBNL organizations, except where such contractors, vendors, or organizations are governed by their own WMG-approved QA programs.

  6. Quality assurance of endoscopy units.

    PubMed

    Stebbing, John F

    2011-06-01

    This chapter reflects on how England has led the world in service development and quality assurance of endoscopy. It draws out themes of leadership, strategic vision and organisational culture. It emphasises the pivotal importance of focussing service improvement on enhancing the quality of a patient's experience of endoscopy. It describes the processes used here for quality assurance of endoscopy units and how these have dovetailed with other strands of work in transforming the English endoscopy service. The chapter presents discussion of the responses to accreditation processes and how the design of the JAG Accreditation process maximises its effectiveness. PMID:21764004

  7. 75 FR 16660 - Airworthiness Directives; SOCATA Model TBM 700 Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-02

    ...-064-AD; Amendment 39-16252; AD 2010-07-07] RIN 2120-AA64 Airworthiness Directives; SOCATA Model TBM..., 2010 (75 FR 89). That NPRM proposed to correct an unsafe condition for the specified products. The MCAI... air commerce by prescribing regulations for practices, methods, and procedures the Administrator...

  8. 75 FR 13239 - Airworthiness Directives; SOCATA Model TBM 700 Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-19

    ... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; SOCATA Model TBM... methods: Federal eRulemaking Portal: Go to http://www.regulations.gov . Follow the instructions for... practices, methods, and procedures the Administrator finds necessary for safety in air commerce....

  9. 76 FR 30295 - Airworthiness Directives; SOCATA Model TBM 700 Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-25

    ... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; SOCATA Model TBM... proposed AD by July 11, 2011. ADDRESSES: You may send comments by any of the following methods: Federal e... air commerce by prescribing regulations for practices, methods, and procedures the Administrator...

  10. 76 FR 4216 - Airworthiness Directives; SOCATA Model TBM 700 Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-25

    ...-041-AD; Amendment 39-16575; AD 2011-02-02] RIN 2120-AA64 Airworthiness Directives; SOCATA Model TBM... (73 FR 54067, September 18, 2008), the Director of the Federal Register approved the incorporation by... September 28, 2010 (75 FR 59658), and proposed to supersede AD 2008-19-06, Amendment 39- 15673 (73 FR...

  11. 75 FR 59658 - Airworthiness Directives; SOCATA Model TBM 700 Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-28

    ... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; SOCATA Model TBM... may send comments by any of the following methods: Federal eRulemaking Portal: Go to http://www... proposed AD. Discussion On September 8, 2008, we issued AD 2008-19-06, Amendment 39-15673 (73 FR...

  12. 75 FR 89 - Airworthiness Directives; SOCATA Model TBM 700 Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-04

    ... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; SOCATA Model TBM... following methods: Federal eRulemaking Portal: Go to http://www.regulations.gov . Follow the instructions..., methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation...

  13. 78 FR 4042 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-18

    ... incorporation by reference of a certain other publication listed in this AD as of August 24, 2007 (72 FR 44753... to supersede airworthiness directive (AD) 2008-05- 10, Amendment 39-15404 (73 FR 11347, March 3, 2008). (AD 2008-05-10 superseded AD 2007-16-13, Amendment 39-15152 (72 FR 44753, August 9, 2007); and AD...

  14. 77 FR 61539 - Airworthiness Directives; DASSAULT AVIATION Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-10

    ... 12866; 2. Is not a ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034...; ] DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; DASSAULT AVIATION Airplanes AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice...

  15. 77 FR 52203 - Airworthiness Directives; Goodyear Aviation Tires

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-29

    ...'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979), (3) Will not affect... Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2012-0881; Directorate Identifier 2012-CE-029-AD; Amendment 39-17164; AD 2012-17-01] RIN 2120-AA64 Airworthiness Directives; Goodyear...

  16. 77 FR 44511 - Airworthiness Directives; Alpha Aviation Concept Limited Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-30

    ... 12866, (2) Is not a ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Alpha Aviation Concept Limited Airplanes AGENCY: Federal Aviation Administration (FAA), Department of Transportation...

  17. 78 FR 23458 - Airworthiness Directives; Dassault Aviation Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-19

    ... and Procedures (44 FR 11034, February 26, 1979); 3. Will not affect intrastate aviation in Alaska; and... Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2013-0306; Directorate Identifier 2013-NM-049-AD; Amendment 39-17417; AD 2013-07-13] RIN 2120-AA64 Airworthiness Directives; Dassault...

  18. 77 FR 16186 - Airworthiness Directives; Dassault Aviation Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-20

    ... Order 12866; 2. Is not a ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Dassault Aviation Airplanes AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking...

  19. 77 FR 5386 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-03

    ..., the email address provided in paragraphs (i)(1) and (j) of AD 2011-24-04, Amendment 39-16868 (76 FR... rule is effective February 3, 2012. The effective date for AD 2011-24-04, Amendment 39-16868 (76 FR...: Airworthiness Directive 2011-24-04, amendment 39-16868 (76 FR 73491, November 29, 2011), currently...

  20. 78 FR 66668 - Airworthiness Directives; Eurocopter France (Eurocopter) Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-06

    ... Policies and Procedures (44 FR 11034, February 26, 1979); 3. Will not affect intrastate aviation in Alaska... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Eurocopter France... written comments, data, or views. We also invite comments relating to the economic, environmental,...

  1. 78 FR 22213 - Airworthiness Directives; Eurocopter France Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-15

    ... Policies and Procedures (44 FR 11034, February 26, 1979); 3. Will not affect intrastate aviation in Alaska... France Helicopters AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). SUMMARY: We propose to adopt a new airworthiness directive (AD) for Eurocopter...

  2. 78 FR 14729 - Airworthiness Directives; Pilatus Aircraft Ltd. Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-07

    ... proposed AD. Discussion On December 28, 2010, we issued AD 2011-01-14, Amendment 39-16571 (76 FR 5647... above. Since we issued AD 2011-01-14, (76 FR 5647; February 1, 2011), the airworthiness limitations of... ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979), (3)...

  3. 78 FR 24689 - Airworthiness Directives; PILATUS Aircraft Ltd. Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-26

    ... Policies and Procedures (44 FR 11034, February 26, 1979), (3) Will not affect intrastate aviation in Alaska... airworthiness directive (AD) for all PILATUS Aircraft Ltd. Model PC-7 airplanes. This proposed AD results from... Pilatus PC-7 AMM report no. 01715 revision 31 dated 30 November 2012 to incorporate a 300 Flight Hour...

  4. 78 FR 67011 - Airworthiness Directives; PILATUS Aircraft Ltd. Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-08

    ... ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979), ] (3.... Model PC-7 airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued... PC-7 Service Bulletin No. 24-009, dated September 6, 2013. The actions described in this...

  5. 78 FR 78701 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-27

    ...We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-300, -400, and -500 series airplanes. This AD was prompted by fuel system reviews conducted by the manufacturer. This AD requires, depending on airplane configuration, replacing fuel pump power control relays with new relays having a ground fault interrupter (GFI) feature, installing ground studs and a......

  6. 78 FR 14934 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-08

    ... 39 to supersede airworthiness directive (AD) 2000-11- 06, Amendment 39-11754 (65 FR 34928, June 1, 2000; corrected August 1, 2000 (65 FR 46862)). That first SNPRM would apply to certain Model 767- 200..., 2012 (77 FR 39188). The first SNPRM proposed to continue to require repetitive inspections to...

  7. 78 FR 49217 - Airworthiness Directives; the Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-13

    ... Register on October 11, 2012 (77 FR 61731). That NPRM proposed to retain repetitive inspections of the in... changes to the airworthiness limitations section. Actions Since Previous NPRM (77 FR 61731, October 11, 2012) Was Issued Since we issued the previous NPRM (77 FR 61731, October 11, 2012), we have...

  8. 78 FR 44473 - Airworthiness Directives; Dassault Aviation Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-24

    ... 12866; 2. Is not a ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034...). SUMMARY: We propose to adopt a new airworthiness directive (AD) for all DASSAULT AVIATION Model FAN JET... cartridges, which could affect the capability to extinguish a fire in an engine, auxiliary power unit,...

  9. 76 FR 30040 - Proposed Airworthiness Directives Legal Interpretation

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-24

    ...The Federal Aviation Administration published a proposed airworthiness directives legal interpretation for comment. In response to several requests, we are extending the comment period to allow additional time for comment. Comments from the public are requested to assist the agency in developing the final legal...

  10. 77 FR 63272 - Airworthiness Directives; Embraer S.A. Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-16

    ..., we estimate that this proposed AD would affect about 163 products of U.S. registry. We also estimate... Procedures (44 FR 11034, February 26, 1979); 3. Will not affect intrastate aviation in Alaska; and 4. Will... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Embraer...

  11. 78 FR 19090 - Airworthiness Directives; Embraer S.A. Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-29

    ... NPRM (77 FR 63272, October 16, 2012). Costs of Compliance We estimate that this AD will affect 163... FR 11034, February 26, 1979); 3. Will not affect intrastate aviation in Alaska; and 4. Will not have...-146-AD; Amendment 39-17384; AD 2013-05-12] RIN 2120-AA64 Airworthiness Directives; Embraer...

  12. 76 FR 81790 - Airworthiness Standards: Transport Category Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-29

    ... From the Federal Register Online via the Government Publishing Office FEDERAL AVIATION ADMINISTRATION 14 CFR Part 25 Airworthiness Standards: Transport Category Airplanes CFR Correction In Title 14 of the Code of Federal Regulations, Parts 1 to 59, revised as of January 1, 2011, on page 413, in Sec....

  13. 76 FR 74665 - Airworthiness Directives; Bombardier, Inc. Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-01

    ... (Transport Canada Civil Aviation (TCCA) STC SA97-106) installed. This AD results from mandatory continuing... Civil Aviation (TCCA), which is the aviation authority for Canada, has issued Canadian Airworthiness... Order 12866; 2. Is not a''significant rule'' under the DOT Regulatory Policies and Procedures (44...

  14. 77 FR 7005 - Airworthiness Directives; Eurocopter Deutschland GMBH Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-10

    ... FR 11034, February 26, 1979); 3. Will not affect intrastate aviation in Alaska to the extent that it...; ] DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Eurocopter Deutschland GMBH Helicopters AGENCY: Federal Aviation Administration (FAA),...

  15. 78 FR 12254 - Interest in Restructure of Rotorcraft Airworthiness Standards

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-22

    ... Privacy Act Statement can be found in the Federal Register published on April 11, 2000 (65 FR 19477-19478... rotorcraft airworthiness standards more efficient and adaptable to future technology. This action is part of... recognized that the evolution of the part 27 and 29 rules has not kept pace with technology and...

  16. 77 FR 23166 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-18

    ...'' (66 FR 23086, May 7, 2001). In addition to new airworthiness standards for transport airplanes and new...,'' Amendment 21-78, and subsequent Amendments 21-82 and 21-83). Among other actions, SFAR 88 (66 FR 23086, May... Policies and Procedures (44 FR 11034, February 26, 1979), (3) Will not affect intrastate aviation in...

  17. 77 FR 31762 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-30

    ... ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979), (3) Will... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; The Boeing Company... directive (AD) for all The Boeing Company Model 707 airplanes, and Model 720 and 720B series airplanes....

  18. 77 FR 42971 - Airworthiness Directives; Various Restricted Category Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-23

    ... Procedures (44 FR 11034, February 26, 1979); 3. Will not affect intrastate aviation in Alaska to the extent... comments. SUMMARY: We are adopting a new airworthiness directive (AD) for Arrow Falcon Exporters, Inc. (AFE...; telephone (559) 781-8604; fax (559) 781-9271; email afe@arrowfalcon.com . You may review the...

  19. 78 FR 54561 - Airworthiness Directives; Piper Aircraft, Inc. Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-05

    ... effective September 5, 2013. The effective date for AD 2013-10-04 (78 FR 35110, June 12, 2013) remains July... INFORMATION: Airworthiness Directive 2013-10-04 (78 FR 35110, June 12, 2013), currently requires a detailed... incorrect model/part number for the Model PA-31-350, tail pipe assembly, top. This document corrects...

  20. 77 FR 65613 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-30

    ...We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777-200LR and -300ER series airplanes. This AD requires reviewing the airplane's maintenance records for each rudder power control unit (PCU) to identify the condition of its related reaction link assembly, and replacing the rudder PCU and its related reaction link assembly if necessary. This AD was......

  1. 76 FR 69155 - Airworthiness Directives; Bombardier, Inc. Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-08

    ... Policies and Procedures (44 FR 11034, February 26, 1979); and 3. Will not have a significant economic...). SUMMARY: We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2B16 (CL-601-3A, CL-601-3R, and CL-604 Variants) airplanes. This proposed AD results from...

  2. 77 FR 47277 - Airworthiness Directives; Bombardier, Inc. Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-08

    ...We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8 series airplanes. This AD was prompted by reports that various pushrods had been manufactured with tubes having the incorrect heat treatment. This AD requires replacing the affected pushrod assembly. We are issuing this AD to prevent loss of rudder control, reduced directional control of the airplane on......

  3. 77 FR 64695 - Airworthiness Directives; Hawker Beechcraft Corporation Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-23

    ...We are adopting a new airworthiness directive (AD) for certain Hawker Beechcraft Corporation Model C90GTi (King Air) airplanes. This AD was prompted by reports of incorrect gauge wires used in certain wiring bundles for the cockpit electrical power for backlighting and instrument panel components. This AD requires replacing incorrect gauge wires in certain electrical power wiring bundles,......

  4. 77 FR 25642 - Airworthiness Directives; Bombardier, Inc. Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-01

    ...We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8 airplanes. This proposed AD was prompted by reports that various pushrods had been manufactured with tubes having the incorrect heat treatment. This proposed AD would require replacing the affected pushrod assembly. We are proposing this AD to prevent loss of rudder control, reduced directional......

  5. 78 FR 71989 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-02

    ... Policies and Procedures (44 FR 11034, February 26, 1979), (3) Will not affect intrastate aviation in Alaska... Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2013-0976; Directorate Identifier 2013-NM-198-AD; Amendment 39-17686; AD 2013-24-12] RIN 2120-AA64 Airworthiness Directives; The Boeing...

  6. 77 FR 51722 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-27

    ... 2008-06-03, Amendment 39-15415 (73 FR 13081, March 12, 2008), for certain The Boeing Company Model 737... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; The Boeing Company... the airplane. Actions Since Existing AD 2008-06-03, Amendment 39-15415 (73 FR 13081, March 12,...

  7. 77 FR 11416 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-27

    ... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; The Boeing Company Airplanes AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM... 12866, (2) Is not a ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR...

  8. 77 FR 51720 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-27

    ... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; The Boeing Company Airplanes AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM... Procedures (44 FR 11034, February 26, 1979), (3) Will not affect intrastate aviation in Alaska, and (4)...

  9. 78 FR 23694 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-22

    ... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; The Boeing Company Airplanes AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM... 12866, (2) Is not a ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR...

  10. 78 FR 21276 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-10

    ... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; The Boeing Company Airplanes AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM... Procedures (44 FR 11034, February 26, 1979), (3) Will not affect intrastate aviation in Alaska, and (4)...

  11. 78 FR 60804 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-02

    ... (70 FR 17596, April 7, 2005), and adding the following new AD: The Boeing Company: Docket No. FAA-2013...-14036 (70 FR 17596, April 7, 2005). (c) Applicability This AD applies to The Boeing Company Model 737... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; The Boeing...

  12. 77 FR 42625 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-20

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2011-1412; Directorate Identifier 2011-NM-158-AD; Amendment 39-17088; AD 2012-12-08] RIN 2120-AA64 Airworthiness Directives; The Boeing...

  13. 76 FR 82205 - Airworthiness Directives; Cessna Aircraft Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-30

    ... TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Cessna Aircraft Company Airplanes AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed... Procedures (44 FR 11034, February 26, 1979), (3) Will not affect intrastate aviation in Alaska, and (4)...

  14. 78 FR 14731 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-07

    ... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; The Boeing Company Airplanes AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM... ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979), (3)...

  15. 78 FR 7645 - Airworthiness Directives; Bell Helicopter Textron, Inc., Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-04

    ...We are adopting a new airworthiness directive (AD) for Bell Helicopter Textron, Inc. (Bell), Model 412 and 412EP helicopters. This AD requires creating a component history card or equivalent record and begin counting and recording the number of accumulated landings for each high aft crosstube assembly (crosstube). Also, this AD requires installing ``caution'' decals regarding towing of a......

  16. 77 FR 731 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-06

    ...We are adopting a new airworthiness directive (AD) for all Model 737 airplanes. This AD was prompted by a report of extensive corrosion of a ballscrew used in the drive mechanism of the horizontal stabilizer trim actuator (HSTA). This AD requires repetitive inspections, lubrications, and repetitive overhauls of the ball nut and ballscrew and attachment (Gimbal) fittings for the trim actuator......

  17. 78 FR 68693 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-15

    ...We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-600, -700, -800, -900, and -900ER series airplanes. This AD was prompted by reports that certain seat track bolts were found with severed head bolts due to fatigue. This AD requires replacing titanium seat track bolts with corrosion resistant steel (CRES) bolts, repetitive inspections for cracking of......

  18. 78 FR 26286 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-06

    ...We are revising an earlier proposed airworthiness directive (AD) for all The Boeing Company Model 717-200 airplanes. That NPRM proposed requiring repetitive inspections for cracking of the overwing frames, and corrective actions if necessary. That NPRM was prompted by multiple reports of cracks of overwing frames. This action revises that NPRM by revising the initial compliance time and......

  19. 78 FR 27010 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-09

    ...We are superseding two existing airworthiness directives (AD) that apply to certain The Boeing Company Model 737-100, -200, -200C, - 300, -400, and -500 series airplanes. Those ADs, for certain airplanes, currently require repetitive inspections of the flap track of the wing outboard flap, and corrective actions if necessary; and eventual rework of the flap track assembly and rear spar......

  20. 14 CFR 23.1529 - Instructions for Continued Airworthiness.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Instructions for Continued Airworthiness. 23.1529 Section 23.1529 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF... to ensure their completion prior to delivery of the first airplane or issuance of a...

  1. 14 CFR 25.1529 - Instructions for Continued Airworthiness.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Instructions for Continued Airworthiness. 25.1529 Section 25.1529 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF... to ensure their completion prior to delivery of the first airplane or issuance of a...

  2. 14 CFR 35.4 - Instructions for Continued Airworthiness.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Instructions for Continued Airworthiness. 35.4 Section 35.4 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... program exists to ensure their completion prior to delivery of the first aircraft with the...

  3. 14 CFR 33.4 - Instructions for Continued Airworthiness.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Instructions for Continued Airworthiness. 33.4 Section 33.4 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... certification if a program exists to ensure their completion prior to delivery of the first aircraft with...

  4. 76 FR 55553 - Airworthiness Standards; Rotor Overspeed Requirements; Correction

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-08

    ... Requirements, published on July 18, 2011 (76 FR 42020). The final rule established uniform rotor overspeed... Overspeed Requirements'' (76 FR 42022). The final rule revised the aircraft turbine engine rotor overspeed... Administration 14 CFR Part 33 RIN 2120-AJ62 Airworthiness Standards; Rotor Overspeed Requirements;...

  5. 78 FR 25363 - Airworthiness Directives; Diamond Aircraft Industries Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-01

    ...'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979), (3) Will not affect... Industries Airplanes AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule; request for... DA 40 NG airplanes. This AD results from mandatory continuing airworthiness information (MCAI)...

  6. 78 FR 47527 - Airworthiness Directives; Dassault Aviation Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-06

    ... and Procedures (44 FR 11034, February 26, 1979); 3. Will not affect intrastate aviation in Alaska; and...-17540; AD 2013-16-02] RIN 2120-AA64 Airworthiness Directives; Dassault Aviation Airplanes AGENCY... FALCON 7X airplanes. This AD requires incorporation of a new procedure into the airplane flight...

  7. 77 FR 71723 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-04

    ...We propose to supersede an existing airworthiness directive (AD) that applies to certain The Boeing Company Model 737-200, -200C, - 300, and -400 series airplanes. The existing AD currently requires repetitive inspections to detect cracking of the corners of the door frame and the cross beams of the aft cargo door, and corrective actions if necessary. The existing AD also requires a......

  8. 14 CFR 21.223 - Class II provisional airworthiness certificates.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Class II provisional airworthiness certificates. 21.223 Section 21.223 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF... the aircraft has been issued to the manufacturer. (c) The applicant must submit a statement by...

  9. 14 CFR 21.221 - Class I provisional airworthiness certificates.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Class I provisional airworthiness certificates. 21.221 Section 21.221 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF... limitations established in §§ 21.81(e) and 91.317 of this subchapter. (b) The manufacturer must hold...

  10. 77 FR 58794 - Airworthiness Directives; Bell Helicopter Textron, Inc.

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-24

    ...'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); 3. Will not affect..., and a revision of the maintenance manual or Instructions for Continued Airworthiness (ICA). This... Limitations section of the applicable maintenance manual or ICA. Within 300 hours TIS, for any affected...

  11. 77 FR 65506 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-29

    .... 39.13 by removing airworthiness directive (AD) 2003-18-05, Amendment 39-13296 (68 FR 53496, September... 13, 2012. (b) Affected ADs This AD supersedes AD 2003-18-05, Amendment 39-13296 (68 FR 53496... proposed AD by December 13, 2012. ADDRESSES: You may send comments, using the procedures found in 14 CFR...

  12. 76 FR 37247 - Airworthiness Directives; Learjet Inc. Model 45 Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-27

    ... other publications listed in this AD as of June 17, 2009 (74 FR 26288, June 2, 2009). ] ADDRESSES: For... airworthiness directive (AD) 2009-11-13, Amendment 39-15923 (74 FR 26288, June 2, 2009). That AD applies to the specified products. The NPRM published in the Federal Register on August 23, 2010 (75 FR 51701). That...

  13. 78 FR 29613 - Airworthiness Directives; the Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-21

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2008-0614; Directorate Identifier 2007-NM-351-AD; Amendment 39-17450; AD 2013-09-08] RIN 2120-AA64 Airworthiness Directives; the Boeing...

  14. 77 FR 23382 - Airworthiness Directives; Sikorsky Aircraft Corporation Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-19

    ... INFORMATION: Discussion On October 26, 2011, at 76 FR 66207, the Federal Register published our Notice of... Policies and Procedures (44 FR 11034, February 26, 1979); (3) Will not affect intrastate aviation in Alaska...-011-AD; Amendment 39-17017; AD 2012-08-01] RIN 2120-AA64 Airworthiness Directives; Sikorsky...

  15. 76 FR 48047 - Airworthiness Directives; Diamond Aircraft Industries Powered Sailplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-08

    ... Procedures (44 FR 11034, February 26, 1979); and 3. Will not have a significant economic impact, positive or... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Diamond Aircraft... directive (AD) for Diamond Aircraft Industries Model H-36 ``DIMONA'' powered sailplanes. This proposed...

  16. 77 FR 67561 - Airworthiness Directives; Univair Aircraft Corporation Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-13

    ... correction is effective November 13, 2012. The effective date of AD 2012-08-06, amendment 39-17023 (77 FR....caldwell@faa.gov . SUPPLEMENTARY INFORMATION: Airworthiness Directive 2012-08-06, amendment 39-17023 (77 FR... 2012-08-06; Amendment 39-17023 (77 FR 52205, August 29, 2012) is corrected as follows: On page...

  17. 77 FR 68058 - Airworthiness Directives; Sikorsky Aircraft Corporation Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-15

    ... Order 12866; 2. Is not a ``significant rule'' under DOT Regulatory Policies and Procedures (44 FR 11034...-062-AD; Amendment 39-17251; AD 2012-22-14] RIN 2120-AA64 Airworthiness Directives; Sikorsky Aircraft... Aircraft Corporation (Sikorsky) Model S-70, S-70A, S-70C, S-70C(M), and S-70C(M1) helicopters with...

  18. 78 FR 49115 - Airworthiness Directives; Eurocopter France Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-13

    ... is effective August 13, 2013. The effective date for AD 2012-25-04 (78 FR 24041, April 24, 2013... INFORMATION: AD 2012-25-04, Amendment 39-17285 (78 FR 24041, April 24, 2013), applies to certain Eurocopter...-100-AD; Amendment 39-17285; AD 2012-25-04] RIN 2120-AA64 Airworthiness Directives; Eurocopter...

  19. 78 FR 49116 - Airworthiness Directives; Eurocopter France Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-13

    ..., 2013. The effective date for AD 2011-22-05 (76 FR 70046, November 10, 2011) remains November 25, 2011..., Amendment 39-16847 (76 FR 70046, November 10, 2011), applies to certain Eurocopter Model AS350B, B1, B2, B3...-018-AD; Amendment 39-16847; AD 2011-22-05] RIN 2120-AA64 Airworthiness Directives; Eurocopter...

  20. 77 FR 1009 - Airworthiness Directives; Turbomeca Turboshaft Engines

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-09

    ... (76 FR 77378, December 13, 2011), currently requires removing from service certain gas generator...; AD 2010-19-06R1] RIN 2120-AA64 Airworthiness Directives; Turbomeca Turboshaft Engines AGENCY: Federal... series turboshaft engines. The AD number is incorrect in the preamble and in the Regulatory text....

  1. 78 FR 9003 - Airworthiness Directives; Engine Alliance Turbofan Engines

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-07

    ... ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979), (3) Will... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Engine Alliance Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed...

  2. 77 FR 9837 - Airworthiness Directives; Lycoming Engines Reciprocating Engines

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-21

    ... published in the Federal Register on September 1, 2011 (76 FR 54397). That NPRM proposed to require removing... Executive Order 12866, (2) Is not a ``significant rule'' under DOT Regulatory Policies and Procedures (44 FR...; AD 2012-03-07] RIN 2120-AA64 Airworthiness Directives; Lycoming Engines Reciprocating Engines...

  3. Quality assurance in radiation therapy: future plans in physics.

    PubMed

    Suntharalingam, N

    1984-06-01

    Modern day radiation therapy has seen the impact of high technology resulting in more sophisticated computer augmented treatment delivery systems, treatment planning procedures and diagnostic imaging techniques. Much work has already been reported in the area of physics efforts related to quality assurance in radiation therapy. Future efforts in physics will have to address the new developments in each component of the whole radiation treatment process. Certain new developments, using both computer and imaging technologies, show promise in providing tools to verify the accuracy of the delivered radiation treatment. Areas receiving careful attention are: integration and registration of information from multiple sources of diagnostic studies; validation of the accuracy of treatment planning systems; assessment of relative merits of alternate dose distributions; improvement of portal and verification film image quality; real time monitoring using light emitting screens and coupled with TV systems; monitoring of treatment and machine parameters using "record and verify" computer systems. The medical physics community, primarily through the American Association of Physicists in Medicine (AAPM), will continue the development of methodologies for technology transfer in the area of quality assurance. Committees and task groups within the AAPM will address the new developments impacting on quality assurance and prepare appropriate protocols and documents to assist the practicing physicist. By necessity, the national Radiological Physics Center (RPC) and the regional Centers for Radiological Physics (CRP) will have to take a major role in the development of new quality assurance programs. PMID:6735795

  4. Quality Assurance 1992-2012

    ERIC Educational Resources Information Center

    Brown, Roger

    2012-01-01

    As the author's contribution to a series marking the Golden Jubilee of the Association of University Administrators, he reflects on changes in quality assurance over the past twenty years and speculates on what the future may hold for quality as the association moves into a new and very different competitive regime. He begins by discussing the…

  5. Quality Assurance in School Health

    ERIC Educational Resources Information Center

    Newell, Susan; Schoenike, Sumner L.; Lisko, Elaine A.

    2003-01-01

    School nurses need to become more influential administrators, managers, and entrepreneurs. They must learn to lead and collaborate effectively in designing, implementing, and evaluating coordinated school health programs. Quality assurance is an essential ingredient in this process that requires accurate, timely, and confidential incident…

  6. Redefining and expanding quality assurance.

    PubMed

    Robins, J L

    1992-12-01

    To meet the current standards of excellence necessary for blood establishments, we have learned from industry that a movement toward organization-wide quality assurance/total quality management must be made. Everyone in the organization must accept responsibility for participating in providing the highest quality products and services. Quality must be built into processes and design systems to support these quality processes. Quality assurance has been redefined to include a quality planning function described as the most effective way of designing quality into processes. A formalized quality planning process must be part of quality assurance. Continuous quality improvement has been identified as the strategy every blood establishment must support while striving for error-free processing as the long-term objective. The auditing process has been realigned to support and facilitate this same objective. Implementing organization-wide quality assurance/total quality management is one proven plan for guaranteeing the quality of the 20 million products that are transfused into 4 million patients each year and for moving toward the new order. PMID:1286566

  7. Metrology: Measurement Assurance Program Guidelines

    NASA Technical Reports Server (NTRS)

    Eicke, W. G.; Riley, J. P.; Riley, K. J.

    1995-01-01

    The 5300.4 series of NASA Handbooks for Reliability and Quality Assurance Programs have provisions for the establishment and utilization of a documented metrology system to control measurement processes and to provide objective evidence of quality conformance. The intent of these provisions is to assure consistency and conformance to specifications and tolerances of equipment, systems, materials, and processes procured and/or used by NASA, its international partners, contractors, subcontractors, and suppliers. This Measurement Assurance Program (MAP) guideline has the specific objectives to: (1) ensure the quality of measurements made within NASA programs; (2) establish realistic measurement process uncertainties; (3) maintain continuous control over the measurement processes; and (4) ensure measurement compatibility among NASA facilities. The publication addresses MAP methods as applied within and among NASA installations and serves as a guide to: control measurement processes at the local level (one facility); conduct measurement assurance programs in which a number of field installations are joint participants; and conduct measurement integrity (round robin) experiments in which a number of field installations participate to assess the overall quality of particular measurement processes at a point in time.

  8. Quality assurance planning and structure.

    PubMed

    Jackman, W; Brown, L D; Al-assaf, A F; Reinke, J M; Abubaker, W; Winter, L; Murphy, G; Blumenfeld, S

    1995-01-01

    Planning for the introduction, implementation, and conduct of quality assurance activities has been the key issue from the outset of the project. Despite the various approaches to planning, no single Quality Assurance (QA) planning can be universally accepted by developing countries due to variations in the socioeconomic, cultural and political makeup of individual countries. This paper summarizes the lessons learned from the Quality Assurance Project in planning a QA program: 1) the need to understand organizational strengths and weaknesses to develop appropriate strategies for QA skills training and organizational change; 2) the need to build on existing systems or activities that support the objectives of the organization and provide an adequate foundation for the QA program; 3) the need to assign responsibility for quality assurance through the creation of QA councils and committees and the assignment of coordinators and other individuals; 4) the need to secure top-level management support to legitimize any changes; 5) the need to determine the method of introducing innovations into organizations, either by a top-down or bottom-up approach; 6) the plan should have well-defined priorities and objectives despite its flexibility as projects evolve and grow over time. PMID:12295830

  9. Separation Assurance and Collision Avoidance

    NASA Technical Reports Server (NTRS)

    Lauderdale, Todd

    2010-01-01

    Objective SACA-1: Determine the level of safety provided by tactical separation assurance safety monitoring systems for UAS missions. a) Rationale: Continuous mission-risk monitoring can provide equivalent levels of safety for UAS operations possibly reducing the burden on other safety systems. b) Approach: Utilize and adapt algorithms and approaches developed for the NextGen Airspace Systems Program for UAS applications.

  10. Blood Gas Quality Assurance System

    PubMed Central

    Pickler, Lee

    1979-01-01

    Quality assurance of health care delivery is as important as the Voluntary Effort (VE) program is to the health care industry. These two seemingly converse positions require a delicate balance. One way this balance is met is by more effectively utilizing current equipment through improved systems.

  11. Waste Management Quality Assurance Plan

    SciTech Connect

    Not Available

    1993-11-30

    Lawrence Berkeley Laboratory`s Environment Department addresses its responsibilities through activities in a variety of areas. The need for a comprehensive management control system for these activities has been identified by the Department of Energy (DOE). The WM QA (Waste Management Quality Assurance) Plan is an integral part of a management system that provides controls necessary to ensure that the department`s activities are planned, performed, documented, and verified. This WM QA Plan defines the requirements of the WM QA program. These requirements are derived from DOE Order 5700.6C, Quality Assurance, the LBL Operating and Assurance Program Plan (OAP, LBL PUB-3111), and other environmental compliance documents applicable to WM activities. The requirements presented herein, as well as the procedures and methodologies that direct the implementation of these requirements, will undergo review and revisions as necessary. The provisions of this QA Plan and its implementing documents apply to quality-affecting activities performed by and for WM. It is also applicable to WM contractors, vendors, and other LBL organizations associated with WM activities, except where such contractors, vendors, or organizations are governed by their own WM-approved QA programs. References used in the preparation of this document are (1) ASME NQA-1-1989, (2) ANSI/ASQC E4 (Draft), (3) Waste Management Quality Assurance Implementing Management Plan (LBL PUB-5352, Rev. 1), (4) LBL Operating and Assurance Program Plan (OAP), LBL PUB-3111, 2/3/93. A list of terms and definitions used throughout this document is included as Appendix A.

  12. 75 FR 28463 - Airworthiness Directives; BAE SYSTEMS (Operations) Limited Model BAe 146 Airplanes and Model Avro...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-21

    ...-16301; AD 2010-10-22] RIN 2120-AA64 Airworthiness Directives; BAE SYSTEMS (Operations) Limited Model BAe 146 Airplanes and Model Avro 146-RJ Airplanes AGENCY: Federal Aviation Administration (FAA... airworthiness directive (AD), which applies to Model BAe 146 airplanes and Model Avro 146-RJ airplanes. That...

  13. 76 FR 39035 - Airworthiness Directives; Airbus Model A310 Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-05

    ... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Airbus Model A310.... ADDRESSES: You may send comments by any of the following methods: Federal eRulemaking Portal: Go to http... Requirements'' (66 FR 23086, May 7, 2001). In addition to new airworthiness standards for transport...

  14. 14 CFR 21.329 - Issue of export certificates of airworthiness for Class I products.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Issue of export certificates of airworthiness for Class I products. 21.329 Section 21.329 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... Approvals § 21.329 Issue of export certificates of airworthiness for Class I products. An applicant...

  15. 14 CFR 21.331 - Issue of airworthiness approval tags for Class II products.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Issue of airworthiness approval tags for Class II products. 21.331 Section 21.331 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... Approvals § 21.331 Issue of airworthiness approval tags for Class II products. (a) An applicant is...

  16. 14 CFR 21.189 - Issue of airworthiness certificate for limited category aircraft.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Issue of airworthiness certificate for limited category aircraft. 21.189 Section 21.189 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... Certificates § 21.189 Issue of airworthiness certificate for limited category aircraft. (a) An applicant for...

  17. 14 CFR 21.333 - Issue of export airworthiness approval tags for Class III products.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Issue of export airworthiness approval tags for Class III products. 21.333 Section 21.333 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... Approvals § 21.333 Issue of export airworthiness approval tags for Class III products. (a) An applicant...

  18. 14 CFR 21.185 - Issue of airworthiness certificates for restricted category aircraft.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Issue of airworthiness certificates for restricted category aircraft. 21.185 Section 21.185 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... Certificates § 21.185 Issue of airworthiness certificates for restricted category aircraft. Link to...

  19. 14 CFR Appendix G to Part 23 - Instructions for Continued Airworthiness

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ..., and work recommended at these periods. However, the applicant may refer to an accessory, instrument... AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Pt. 23, App....1529. (b) The Instructions for Continued Airworthiness for each airplane must include the...

  20. 14 CFR Appendix G to Part 23 - Instructions for Continued Airworthiness

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Instructions for Continued Airworthiness G Appendix G to Part 23 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Pt. 23, App. G Appendix G to Part...

  1. 14 CFR Appendix A to Part 29 - Instructions for Continued Airworthiness

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Instructions for Continued Airworthiness A Appendix A to Part 29 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Pt. 29, App. A Appendix A to Part 29—Instructions for Continued...

  2. 14 CFR Appendix A to Part 31 - Instructions for Continued Airworthiness

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Instructions for Continued Airworthiness A Appendix A to Part 31 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: MANNED FREE BALLOONS Pt. 31, App. A Appendix A to Part 31—Instructions for Continued...

  3. 14 CFR Appendix A to Part 27 - Instructions for Continued Airworthiness

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Instructions for Continued Airworthiness A Appendix A to Part 27 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Pt. 27, App. A Appendix A to Part 27—Instructions for Continued...

  4. 14 CFR 21.339 - Special export airworthiness approval for aircraft.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... airworthiness lists as an exception any difference between the aircraft to be exported and its type design. § 21..., propeller, or article that is manufactured under this part if it conforms to its approved design and is in a... exported and its approved design. (c) A person may obtain from the FAA an export airworthiness approval...

  5. Airworthiness criteria development for powered-lift aircraft: A program summary

    NASA Technical Reports Server (NTRS)

    Heffley, R. K.; Stapleford, R. L.; Rumold, R. C.

    1977-01-01

    A four-year simulation program to develop airworthiness criteria for powered-lift aircraft is summarized. All flight phases affected by use of powered lift (approach, landing, takeoff) are treated with regard to airworthiness problem areas (limiting flight conditions and safety margins: stability, control, and performance; and systems failure). The general features of powered-lift aircraft are compared to conventional aircraft.

  6. 77 FR 2926 - Airworthiness Directives; Agusta S.p.A. Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-20

    ... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Agusta S.p.A...). SUMMARY: We propose to adopt a new airworthiness directive (AD) for Agusta S.p.A. (Agusta) Model AB139 and... Office between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket...

  7. 77 FR 39444 - Airworthiness Directives; Agusta S.p.A. Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-03

    ... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Agusta S.p.A...). SUMMARY: We propose to supersede an existing airworthiness directive (AD) for Agusta S.p.A. (Agusta) Model... ``Mail'' address between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. Examining...

  8. 77 FR 1654 - Airworthiness Directives; Agusta S.p.A. Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-11

    ... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Agusta S.p.A...). SUMMARY: We propose to adopt a new airworthiness directive (AD) for all Agusta S.p.A. (Agusta) Model A109..., DC 20590-0001. Hand Delivery: Deliver to the ``Mail'' address between 9 a.m. and 5 p.m.,...

  9. 77 FR 36137 - Airworthiness Directives; AGUSTA S.p.A. Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-18

    ...-017-AD; Amendment 39-17076; AD 2012-11-12] RIN 2120-AA64 Airworthiness Directives; AGUSTA S.p.A... rule; request for comments. SUMMARY: We are adopting a new airworthiness directive (AD) for Agusta S.p...'' address between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. Examining the AD...

  10. 77 FR 30236 - Airworthiness Directives; Agusta S.p.A. Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-22

    ... 12866; 2. Is not a ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Agusta S.p.A...). SUMMARY: We propose to adopt a new airworthiness directive (AD) for certain Agusta S.p.A. (Agusta)...

  11. 77 FR 20518 - Airworthiness Directives; Agusta S.p.A. Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-05

    ... 2011-SW-013-AD; Amendment 39-17007; AD 2012-07-01] RIN 2120-AA64 Airworthiness Directives; Agusta S.p.A... rule; request for comments. SUMMARY: We are adopting a new airworthiness directive (AD) for Agusta S.p... Delivery: Deliver to the ``Mail'' address between 9 a.m. and 5 p.m., Monday through Friday, except...

  12. 77 FR 27144 - Airworthiness Directives; Agusta S.p.A. Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-09

    ... 5, 2010; Correction published at 75 FR 65224, October 22, 2010) to require installing a ``BATT BUS... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Agusta S.p.A...). SUMMARY: We propose to adopt a new airworthiness directive (AD) for Agusta S.p.A. (Agusta) Model...

  13. 77 FR 64699 - Airworthiness Directives; Agusta S.p.A. Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-23

    ...-016-AD; Amendment 39-17223; AD 2012-21-07] RIN 2120-AA64 Airworthiness Directives; Agusta S.p.A... new airworthiness directive (AD) for Agusta S.p.A. (Agusta) Model A109S helicopters to require..., 2012. ADDRESSES: For service information identified in this AD, contact Agusta, S.p.A., Via...

  14. 77 FR 37779 - Airworthiness Directives; Agusta S.p.A. Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-25

    ... Executive Order 12866; (2) Is not a ``significant rule'' under DOT Regulatory Policies and Procedures (44 FR...-043-AD; Amendment 39-17090; AD 2012-12-10] RIN 2120-AA64 Airworthiness Directives; Agusta S.p.A... new airworthiness directive (AD) for Agusta S.p.A. (Agusta) Model AB139 and AW139 helicopters with...

  15. 78 FR 68357 - Airworthiness Directives; Aermacchi S.p.A. Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-14

    ...-043-AD; Amendment 39-17655; AD 2013-22-23] RIN 2120-AA64 Airworthiness Directives; Aermacchi S.p.A.... SUMMARY: We are adopting a new airworthiness directive (AD) for Aermacchi S.p.A. Models F.260, F.260B, F... Jersey Avenue SE., Washington, DC 20590, between 9 a.m. and 5 p.m., Monday through Friday, except...

  16. 78 FR 12651 - Airworthiness Directives; Agusta S.p.A. Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-25

    ... (67 FR 67510, November 6, 2002) to require a reduction in V NE , a pilot-check of each T/R blade... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Agusta S.p.A...). SUMMARY: We propose to supersede an existing airworthiness directive (AD) for Agusta S.p.A. (Agusta)...

  17. 78 FR 17075 - Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-20

    ...-31-AD; Amendment 39-17391; AD 2013-05-19] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce... rule. SUMMARY: We are adopting a new airworthiness directive (AD) for certain Rolls-Royce Deutschland..., 44701. Sec. 39.13 0 2. The FAA amends Sec. 39.13 by adding the following new AD: 2013-05-19...

  18. 78 FR 20509 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-05

    ... Federal Aviation Administration 14 CFR Part 39 RIN 2120-AA64 Airworthiness Directives; Rolls-Royce plc... (NPRM). SUMMARY: We propose to adopt a new airworthiness directive (AD) for all Rolls-Royce plc (RR... identified in this proposed AD, contact Rolls-Royce plc, Corporate Communications, P.O. Box 31,...

  19. 77 FR 56756 - Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-14

    ...-43-AD; Amendment 39-17115; AD 2012-14-01] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce... rule. SUMMARY: We are adopting a new airworthiness directive (AD) for certain ] Rolls-Royce Deutschland.... The technical investigations carried out by Rolls-Royce Deutschland revealed that this discrepancy...

  20. 78 FR 17082 - Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbojet Engines

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-20

    ... 2012-NE-28-AD; Amendment 39-17392; AD 2013-05-20] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce... rule. SUMMARY: We are adopting a new airworthiness directive (AD) for certain Rolls-Royce Deutschland... the following new AD: 2013-05-20 Rolls-Royce Deutschland Ltd & Co KG (formerly Rolls-Royce...

  1. 78 FR 17079 - Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-20

    ... 2012-NE-36-AD; Amendment 39-17396; AD 2013-06-01] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce... rule. SUMMARY: We are adopting a new airworthiness directive (AD) for certain Rolls-Royce Deutschland..., 44701. Sec. 39.13 0 2. The FAA amends Sec. 39.13 by adding the following new AD: 2013-06-01...

  2. 77 FR 58762 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-24

    ...-30-AD; Amendment 39-17183; AD 2012-18-07] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce plc... superseding an existing airworthiness directive (AD) for all Rolls-Royce plc (RR) RB211-Trent 875-17, RB211..., contact Rolls-Royce plc, Corporate Communications, P.O. Box 31, Derby, England, DE248BJ, phone:...

  3. 76 FR 19714 - Airworthiness Directives; Airbus Model A320-214, -232, and -233 Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-08

    ...We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition...

  4. 75 FR 19207 - Airworthiness Directives; Airbus Model 340-500 and -600 Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-14

    ...We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition...

  5. 75 FR 51931 - Airworthiness Directives; Dassault-Aviation Model FALCON 7X Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-24

    ...We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition...

  6. 76 FR 35344 - Airworthiness Directives; Costruzioni Aeronautiche Tecnam srl Model P2006T Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-17

    ...We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition...

  7. 76 FR 12624 - Airworthiness Directives; Dassault-Aviation Model FALCON 7X Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-08

    ...We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition...

  8. 75 FR 224 - Airworthiness Directives; Bombardier, Inc. (Type Certificate Previously Held by de Havilland, Inc...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-05

    ...We are superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition...

  9. 76 FR 50113 - Airworthiness Directives; Airbus Model A320-214, -232, and -233 Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-12

    ...We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition...

  10. 75 FR 16685 - Airworthiness Directives; Airbus Model A300-600 and A310 Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-02

    ...We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: Surface defects were visually detected on the rudder of one......

  11. 76 FR 40219 - Airworthiness Directives; Various Aircraft Equipped With Rotax Aircraft Engines 912 A Series Engine

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-08

    ...We are adopting a new airworthiness directive (AD) for the products listed above that will supersede an existing AD. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition...

  12. 78 FR 65869 - Airworthiness Directives; DG Flugzeugbau GmbH Gliders

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-04

    ...'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979), (3) Will not affect...-17646; AD 2013-22-14] RIN 2120-AA64 Airworthiness Directives; DG Flugzeugbau GmbH Gliders AGENCY... adopting a new airworthiness directive (AD) for any DG Flugzeugbau GmbH Model DG-1000T glider equipped...

  13. 78 FR 70209 - Airworthiness Directives; XtremeAir GmbH Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-25

    ...'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979), (3) Will not affect...-047-AD; Amendment 39-17674; AD 2013-23-19] RIN 2120-AA64 Airworthiness Directives; XtremeAir GmbH.... SUMMARY: We are adopting a new airworthiness directive (AD) for XtremeAir GmbH Model XA42 airplanes....

  14. 78 FR 67013 - Airworthiness Directives; DG Flugzeugbau GmbH Gliders

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-08

    ...'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979), (3) Will not affect...-030-AD; Amendment 39-17644; AD 2013-22-12] RIN 2120-AA64 Airworthiness Directives; DG Flugzeugbau GmbH.... SUMMARY: We are adopting a new airworthiness directive (AD) for all DG Flugzeugbau GmbH Models DG-800A,...

  15. 76 FR 3054 - Airworthiness Directives; The Boeing Company Model 777 Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-19

    ...We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD would require revising the maintenance program to update inspection requirements to detect fatigue cracking of principal structural elements (PSEs). This proposed AD was prompted by a new revision to the airworthiness limitations of the maintenance planning document. We are proposing this AD......

  16. 76 FR 485 - Airworthiness Directives; Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Model...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-05

    ...The FAA proposes to supersede an existing airworthiness directive (AD) that applies to all Model 382, 382B, 382E, 382F, and 382G airplanes. The existing AD currently requires revising the FAA- approved maintenance program by incorporating new airworthiness limitations for fuel tank systems to satisfy Special Federal Aviation Regulation No. 88 requirements. That AD also requires the......

  17. 76 FR 25534 - Airworthiness Directives; Hamilton Sundstrand Propellers Model 247F Propellers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-05

    ...@faa.gov . SUPPLEMENTARY INFORMATION: Airworthiness Directive 2011-04-02, amendment 39-16602 (76 FR..., FR2183, FR2187, FR2262, FR2276 through FR2279 inclusive, FR 2398, FR2449 to FR2958 inclusive, FR20010710...-25-AD; Amendment 39-16602; AD 2011-04-02] RIN 2120-AA64 Airworthiness Directives; Hamilton...

  18. 76 FR 21820 - Airworthiness Directives; Bombardier, Inc. Model DHC-8-400 Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-19

    ...We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition...

  19. 76 FR 31508 - Airworthiness Directives; Saab AB, Saab Aerosystems Model SAAB 2000 Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-01

    ...We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition...

  20. 76 FR 22316 - Airworthiness Directives; Pacific Aerospace Limited Model 750XL Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-21

    ...We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition...

  1. 14 CFR 39.15 - Does an airworthiness directive apply if the product has been changed?

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... the product has been changed? 39.15 Section 39.15 Aeronautics and Space FEDERAL AVIATION... directive apply if the product has been changed? Yes, an airworthiness directive applies to each product identified in the airworthiness directive, even if an individual product has been changed by...

  2. 14 CFR 39.15 - Does an airworthiness directive apply if the product has been changed?

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Does an airworthiness directive apply if the product has been changed? 39.15 Section 39.15 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS DIRECTIVES § 39.15 Does an...

  3. 14 CFR Appendix A to Part 35 - Instructions for Continued Airworthiness

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Instructions for Continued Airworthiness A Appendix A to Part 35 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: PROPELLERS Pt. 35, App. A Appendix A to Part 35—Instructions...

  4. 75 FR 52860 - Final Airworthiness Design Standards for Acceptance Under the Primary Category Rule; Orlando...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-30

    ... Register on June 21, 2010, 75 FR 34953. No comments were received, and the airworthiness design standards... Under the Primary Category Rule; Orlando Helicopter Airways (OHA), Inc., Models Cessna 172I, 172K, 172L... Proposed Airworthiness Design Standards for Acceptance Under the Primary Category Rule; Orlando...

  5. 76 FR 65421 - Airworthiness Directives; Schempp-Hirth Flugzeugbau GmbH Gliders

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-21

    ...We propose to adopt a new airworthiness directive (AD) for Schempp-Hirth Flugzeugbau GmbH Model Discus 2cT gliders. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition...

  6. 75 FR 71528 - Airworthiness Directives; Dassault-Aviation Model FALCON 7X Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-24

    ...We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition...

  7. 76 FR 27232 - Airworthiness Directives; Airbus Model A310 Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-11

    ...We are adopting a new airworthiness directive (AD) for the products listed above that would supersede two existing ADs. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition...

  8. 75 FR 43801 - Airworthiness Directives; Eurocopter France (ECF) Model EC225LP Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-27

    ...We are adopting a new airworthiness directive (AD) for the specified ECF Model EC225LP helicopters. This AD results from a mandatory continuing airworthiness information (MCAI) AD issued by the aviation authority of the European Aviation Safety Agency (EASA), which is the Technical Agent for the Member States of the European Community. The MCAI AD states there have been a ``few'' reports of......

  9. 77 FR 37790 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-25

    ...We are adopting a new airworthiness directive (AD) that supersedes an existing Emergency Airworthiness Directive (EAD) for certain Eurocopter Deutschland GmbH (ECD) Model EC135 helicopters. The existing EAD, which was previously sent to all known U.S. owners and operators of ECD Model EC135 helicopters and not made generally effective by publication in the Federal Register, currently requires......

  10. 76 FR 24351 - Airworthiness Directives; Airbus Model A340-200 and -300 Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-02

    ...We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition...

  11. 14 CFR 21.50 - Instructions for continued airworthiness and manufacturer's maintenance manuals having...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Instructions for continued airworthiness and manufacturer's maintenance manuals having airworthiness limitations sections. 21.50 Section 21.50 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT...

  12. 75 FR 79950 - Airworthiness Directives; Kaman Aerospace Corporation (Kaman) Model K-1200 Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-21

    ... Policies and Procedures (44 FR 11034, February 26, 1979), (3) Will not affect intrastate aviation in Alaska... Continued Airworthiness (ICA) by establishing a life limit of 8,000 hours time-in-service (TIS) for each... requires revising the Airworthiness Limitations section of the ICA by establishing a life limit of...

  13. 75 FR 27414 - Airworthiness Directives; Airbus A318, A319, A320, A321 Series Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-17

    ...We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition...

  14. 78 FR 58872 - Airworthiness Directives; GA 8 Airvan (Pty) Ltd Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-25

    ... not a ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26...-027-AD; Amendment 39-17594; AD 2013-19-12] RIN 2120-AA64 Airworthiness Directives; GA 8 Airvan (Pty... comments. SUMMARY: We are adopting a new airworthiness directive (AD) for GA 8 Airvan (Pty) Ltd Models...

  15. 78 FR 32081 - Airworthiness Directives; Aircraft Industries a.s. Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-29

    ... (44 FR 11034, February 26, 1979), (3) Will not affect intrastate aviation in Alaska, and (4) Will not...-011-AD; Amendment 39-17462; AD 2013-11-02] RIN 2120-AA64 Airworthiness Directives; Aircraft Industries... comments. SUMMARY: We are adopting a new airworthiness directive (AD) for Aircraft Industries a.s. Model...

  16. Process chemistry {ampersand} statistics quality assurance plan

    SciTech Connect

    Meznarich, H.K.

    1996-08-01

    This document provides quality assurance guidelines and quality control requirements for Process Chemistry and Statistics. This document is designed on the basis of Hanford Analytical Services Quality Assurance Plan (HASQAP) technical guidelines and is used for governing process chemistry activities.

  17. Nova laser assurance-management system

    SciTech Connect

    Levy, A.J.

    1983-07-18

    In a well managed project, Quality Assurance is an integral part of the management activities performed on a daily basis. Management assures successful performance within budget and on schedule by using all the good business, scientific, engineering, quality assurance, and safety practices available. Quality assurance and safety practices employed on Nova are put in perspective by integrating them into the overall function of good project management. The Nova assurance management system was developed using the quality assurance (QA) approach first implemented at LLNL in early 1978. The LLNL QA program is described as an introduction to the Nova assurance management system. The Nova system is described pictorially through the Nova configuration, subsystems and major components, interjecting the QA techniques which are being pragmatically used to assure the successful completion of the project.

  18. 45 CFR 1110.4 - Assurances required.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... General Services Administration. (41 CFR 101-6.2) (b) Continuing Federal financial assistance. Every... shall specify the form of the foregoing assurances and the extent to which like assurances will...

  19. 45 CFR 1110.4 - Assurances required.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... General Services Administration. (41 CFR 101-6.2) (b) Continuing Federal financial assistance. Every... shall specify the form of the foregoing assurances and the extent to which like assurances will...

  20. 22 CFR 209.5 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Administrator of General Services (41 CFR 101-6.2). (b) Assurances from institutions. (1) In the case of any... which like assurances will be required of subgrantees, contractors and subcontractors,...

  1. Quality assurance for environmental analytical chemistry: 1980

    SciTech Connect

    Gladney, E.S.; Goode, W.E.; Perrin, D.R.; Burns, C.E.

    1981-09-01

    The continuing quality assurance effort by the Environmental Surveillance Group is presented. Included are all standard materials now in use, their consensus or certified concentrations, quality control charts, and all quality assurance measurements made by H-8 during 1980.

  2. 28 CFR 42.504 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-Implementation of Section 504 of the Rehabilitation Act of 1973 General Provisions § 42.504 Assurances required... shall contain a covenant running with the land assuring nondiscrimination on the condition described...

  3. Quality Assurance Activities in High School Student Mental Health Centers.

    ERIC Educational Resources Information Center

    Nabors, Laura; Tashman, Nancy; Myers, Patrick; Weist, Mark

    This study of school-based mental health programs used stakeholder focus groups to examine factors related to positive treatment outcomes, barriers to accessing services, and methods for improving service delivery to high school students with emotional/behavioral disorders. Fifty-one high school students (34 receiving treatment) at three urban…

  4. 50 CFR 600.240 - Security assurances.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 50 Wildlife and Fisheries 10 2011-10-01 2011-10-01 false Security assurances. 600.240 Section 600... ADMINISTRATION, DEPARTMENT OF COMMERCE MAGNUSON-STEVENS ACT PROVISIONS Council Membership § 600.240 Security assurances. (a) DOC Office of Security will issue security assurances to Council members following...

  5. 48 CFR 370.402 - Assurances.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... SPECIAL PROGRAMS AFFECTING ACQUISITION Acquisitions Involving the Use of Laboratory Animals 370.402 Assurances. (a) Assurances may be one of two following types: (1) Full Animal Welfare Assurance (AWA). An AWA... of Laboratory Animal Welfare, NIH MSC 7507, 6100 Executive Blvd., Room 3B01, Rockville,...

  6. 48 CFR 370.402 - Assurances.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... SPECIAL PROGRAMS AFFECTING ACQUISITION Acquisitions Involving the Use of Laboratory Animals 370.402 Assurances. (a) Assurances may be one of two following types: (1) Full Animal Welfare Assurance (AWA). An AWA... of Laboratory Animal Welfare, NIH MSC 7507, 6100 Executive Blvd., Room 3B01, Rockville,...

  7. 48 CFR 370.402 - Assurances.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... SPECIAL PROGRAMS AFFECTING ACQUISITION Acquisitions Involving the Use of Laboratory Animals 370.402 Assurances. (a) Assurances may be one of two following types: (1) Full Animal Welfare Assurance (AWA). An AWA... of Laboratory Animal Welfare, NIH MSC 7507, 6100 Executive Blvd., Room 3B01, Rockville,...

  8. Characteristics to Evaluate the Quality Assurance Workforce.

    ERIC Educational Resources Information Center

    Reynolds, Craig Otis

    Quality assurance is a vital part of any Navy contract administration activity. It is essential that the personnel involved in quality assurance be of extremely high caliber. The purpose of the paper is to develop a model of the educational background of an ideal quality assurance man. The paper outlines the functions which might be required of…

  9. 40 CFR 31.45 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Quality assurance. 31.45 Section 31.45... Requirements Reports, Records, Retention, and Enforcement § 31.45 Quality assurance. If the grantee's project... quality assurance practices consisting of policies, procedures, specifications, standards,...

  10. 40 CFR 30.54 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Quality assurance. 30.54 Section 30.54... NON-PROFIT ORGANIZATIONS Post-Award Requirements Reports and Records § 30.54 Quality assurance. If the... data generation, the grantee shall develop and implement quality assurance practices consisting...

  11. 13 CFR 113.4 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Assurances required. 113.4 Section... Provisions § 113.4 Assurances required. An application for financial assistance shall, as a condition to its approval and the extension of such assistance, contain or be accompanied by an assurance that the...

  12. 43 CFR 41.115 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Assurance required. 41.115 Section 41.115... EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Introduction § 41.115 Assurance..., be accompanied by, or be covered by a specifically identified assurance from the applicant...

  13. 15 CFR 8a.115 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Assurance required. 8a.115 Section 8a... Assurance required. (a) General. Either at the application stage or the award stage, Federal agencies must... contain, be accompanied by, or be covered by a specifically identified assurance from the applicant...

  14. 18 CFR 705.5 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 18 Conservation of Power and Water Resources 2 2010-04-01 2010-04-01 false Assurance required. 705... Assurance required. (a) General. Every application for Federal financial assistance to carry out a program... pursuant to the application, contain or be accompanied by an assurance that the program will be...

  15. 10 CFR 5.115 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Assurance required. 5.115 Section 5.115 Energy NUCLEAR... FEDERAL FINANCIAL ASSISTANCE Introduction § 5.115 Assurance required. (a) General. Either at the... specifically identified assurance from the applicant or recipient, satisfactory to the designated...

  16. 49 CFR 21.7 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Assurances required. 21.7 Section 21.7... DEPARTMENT OF TRANSPORTATION-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 § 21.7 Assurances... Federal financial assistance pursuant to the application, contain or be accompanied by, an assurance...

  17. 31 CFR 28.115 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Assurance required. 28.115 Section 28....115 Assurance required. (a) General. Either at the application stage or the award stage, Federal... assistance contain, be accompanied by, or be covered by a specifically identified assurance from...

  18. 38 CFR 23.115 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Assurance required. 23... Introduction § 23.115 Assurance required. (a) General. Either at the application stage or the award stage... financial assistance contain, be accompanied by, or be covered by a specifically identified assurance...

  19. 14 CFR 1253.115 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Assurance required. 1253.115 Section 1253....115 Assurance required. (a) General. Either at the application stage or the award stage, Federal... assistance contain, be accompanied by, or be covered by a specifically identified assurance from...

  20. 43 CFR 34.5 - Assurances.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Assurances. 34.5 Section 34.5 Public Lands... OPERATION OF THE ALASKA NATURAL GAS TRANSPORTATION SYSTEM § 34.5 Assurances. Every application for a... subcontractor to which this Part applies, must contain an assurance that the recipient, contractor,...

  1. 34 CFR 106.4 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Assurance required. 106.4 Section 106.4 Education... Introduction § 106.4 Assurance required. (a) General. Every application for Federal financial assistance shall as condition of its approval contain or be accompanied by an assurance from the applicant...

  2. 22 CFR 146.115 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Assurance required. 146.115 Section 146.115... PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Introduction § 146.115 Assurance required. (a... by, or be covered by a specifically identified assurance from the applicant or...

  3. 13 CFR 117.7 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Assurances required. 117.7 Section....7 Assurances required. An application for financial assistance administered by the Small Business... accompanied by an assurance that the recipient will comply with this part. SBA shall specify the form of...

  4. 29 CFR 35.23 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Assurances required. 35.23 Section 35.23 Labor Office of the... FINANCIAL ASSISTANCE FROM THE DEPARTMENT OF LABOR Duties of DOL Recipients § 35.23 Assurances required. A recipient or applicant for Federal financial assistance from DOL shall sign a written assurance, in a...

  5. 44 CFR 7.7 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Assurances required. 7.7... in FEMA-Assisted Programs-General § 7.7 Assurances required. Every application for Federal financial... assistance pursuant to the application, contain or be accompanied by an assurance that the program will...

  6. 45 CFR 1151.41 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 3 2010-10-01 2010-10-01 false Assurances required. 1151.41 Section 1151.41... Assurances required. (a) An applicant for federal financial assistance to which this part applies shall submit an assurance, on a form specified by the Chairman, that the program or activity will be...

  7. 29 CFR 36.115 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Assurance required. 36.115 Section 36.115 Labor Office of... RECEIVING FEDERAL FINANCIAL ASSISTANCE Introduction § 36.115 Assurance required. (a) General. Either at the... specifically identified assurance from the applicant or recipient, satisfactory to the designated...

  8. 45 CFR 1232.5 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Assurances required. 1232.5 Section 1232.5 Public... Provisions § 1232.5 Assurances required. (a) An applicant for Federal financial assistance to which this part applies shall submit an assurance, on a form specified by the Director, that the program or activity...

  9. 7 CFR 15a.4 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 1 2010-01-01 2010-01-01 false Assurance required. 15a.4 Section 15a.4 Agriculture... FEDERAL FINANCIAL ASSISTANCE Introduction § 15a.4 Assurance required. (a) General. Every application for... contain or be accompanied by an assurance from the applicant or recipient, satisfactory to the...

  10. 29 CFR 530.103 - Employer assurances.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Employer assurances. 530.103 Section 530.103 Labor... OF HOMEWORKERS IN CERTAIN INDUSTRIES Homeworker Employer Certificates § 530.103 Employer assurances... employer must provide written assurances concerning the employment of homeworkers subject to section...

  11. 22 CFR 229.115 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Assurance required. 229.115 Section 229.115... PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Introduction § 229.115 Assurance required. (a... by, or be covered by a specifically identified assurance from the applicant or...

  12. 24 CFR 1.5 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Assurances required. 1.5 Section 1... TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 § 1.5 Assurances required. (a) General. (1) Every contract for... assistance pursuant to such contract or application, contain or be accompanied by an assurance that...

  13. 13 CFR 112.8 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Assurances required. 112.8 Section... ASSISTED PROGRAMS OF SBA-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 § 112.8 Assurances... to its approval and the extension of such assistance, contain or be accompanied by an assurance...

  14. 28 CFR 42.105 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Assurance required. 42.105 Section 42.105... Act of 1964 1 § 42.105 Assurance required. (a) General. (1) Every application for Federal financial... pursuant to the application, contain or be accompanied by an assurance that the program will be...

  15. 44 CFR 19.115 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Assurance required. 19.115... RECEIVING FEDERAL FINANCIAL ASSISTANCE Introduction § 19.115 Assurance required. (a) General. Either at the... specifically identified assurance from the applicant or recipient, satisfactory to the designated...

  16. 45 CFR 2555.115 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Assurance required. 2555.115 Section 2555.115... FINANCIAL ASSISTANCE Introduction § 2555.115 Assurance required. (a) General. Either at the application... specifically identified assurance from the applicant or recipient, satisfactory to the designated...

  17. 22 CFR 142.5 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Assurances required. 142.5 Section 142.5... OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE General Provisions § 142.5 Assurances required. (a) Assurances. An applicant for Federal financial assistance to which this part applies shall...

  18. 18 CFR 1317.115 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 18 Conservation of Power and Water Resources 2 2010-04-01 2010-04-01 false Assurance required... Introduction § 1317.115 Assurance required. (a) General. Either at the application stage or the award stage... financial assistance contain, be accompanied by, or be covered by a specifically identified assurance...

  19. 5 CFR 900.405 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Assurances required. 900.405 Section 900... Assurances required. (a) General. (1) An application for Federal financial assistance to carry out a program... accompanied by, assurances that the program will be conducted or the facility operated in compliance with...

  20. 28 CFR 54.115 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Assurance required. 54.115 Section 54.115... EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Introduction § 54.115 Assurance..., be accompanied by, or be covered by a specifically identified assurance from the applicant...

  1. 29 CFR 31.6 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Assurances required. 31.6 Section 31.6 Labor Office of the... OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 § 31.6 Assurances required. (a) General. (1) Every... arrangement contain or be accompanied by an assurance that the program will be conducted or the...

  2. 24 CFR 3.115 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Assurance required. 3.115 Section 3... Introduction § 3.115 Assurance required. (a) General. Either at the application stage or the award stage... financial assistance contain, be accompanied by, or be covered by a specifically identified assurance...

  3. 49 CFR 27.9 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Assurance required. 27.9 Section 27.9... OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE General § 27.9 Assurance required. (a) General... pursuant to the application, contain, or be accompanied by, written assurance that the program or...

  4. 6 CFR 17.115 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 6 Domestic Security 1 2010-01-01 2010-01-01 false Assurance required. 17.115 Section 17.115....115 Assurance required. (a) General. Either at the application stage or the award stage, Federal... assistance contain, be accompanied by, or be covered by a specifically identified assurance from...

  5. 22 CFR 141.4 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Assurances required. 141.4 Section 141.4... DEPARTMENT OF STATE-EFFECTUATION OF TITLE VI OF THE CIVIL RIGHTS ACT OF 1964 § 141.4 Assurances required. (a..., shall contain or be accompanied by an assurance that the program will be conducted or the...

  6. 7 CFR 15b.5 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 1 2010-01-01 2010-01-01 false Assurances required. 15b.5 Section 15b.5 Agriculture... ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE General Provisions § 15b.5 Assurances required. (a) Assurances. An applicant for Federal financial assistance to which this part applies shall submit...

  7. 32 CFR 196.115 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 2 2010-07-01 2010-07-01 false Assurance required. 196.115 Section 196.115... FINANCIAL ASSISTANCE Introduction § 196.115 Assurance required. (a) General. Either at the application stage... identified assurance from the applicant or recipient, satisfactory to the designated agency official,...

  8. 43 CFR 27.4 - Assurances.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Assurances. 27.4 Section 27.4 Public Lands... PUBLIC LAW 93-153 § 27.4 Assurances. Every application for a permit, right-of-way, public land order, or... an assurance that the recipient, contractor, or subcontractor does not and will not maintain...

  9. 49 CFR 25.115 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Assurance required. 25.115 Section 25.115... PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Introduction § 25.115 Assurance required. (a... by, or be covered by a specifically identified assurance from the applicant or...

  10. 36 CFR 1211.115 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Assurance required. 1211.115... FINANCIAL ASSISTANCE Introduction § 1211.115 Assurance required. (a) General. Either at the application... specifically identified assurance from the applicant or recipient, satisfactory to the designated...

  11. 45 CFR 86.4 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 1 2010-10-01 2010-10-01 false Assurance required. 86.4 Section 86.4 Public... Assurance required. (a) General. Every application for Federal financial assistance for any education program or activity shall as condition of its approval contain or be accompanied by an assurance from...

  12. 43 CFR 17.204 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Assurances required. 17.204 Section 17.204... PROGRAMS OF THE DEPARTMENT OF THE INTERIOR Nondiscrimination on the Basis of Handicap § 17.204 Assurances required. (a) Assurances. An applicant for Federal financial assistance to which this subpart applies...

  13. 50 CFR 600.240 - Security assurances.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 50 Wildlife and Fisheries 12 2012-10-01 2012-10-01 false Security assurances. 600.240 Section 600... ADMINISTRATION, DEPARTMENT OF COMMERCE MAGNUSON-STEVENS ACT PROVISIONS Council Membership § 600.240 Security assurances. (a) DOC Office of Security will issue security assurances to Council members following...

  14. 50 CFR 600.240 - Security assurances.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 50 Wildlife and Fisheries 12 2013-10-01 2013-10-01 false Security assurances. 600.240 Section 600... ADMINISTRATION, DEPARTMENT OF COMMERCE MAGNUSON-STEVENS ACT PROVISIONS Council Membership § 600.240 Security assurances. (a) DOC Office of Security will issue security assurances to Council members following...

  15. Assuring Residential Quality: Issues, Approaches and Instruments.

    ERIC Educational Resources Information Center

    Bersani, Hank A., Jr.

    This report begins with discussion of several issues in the field of quality assurance in residential services for individuals with developmental disabilities. The issues include definitions of key terms, the role of ideology, major types of quality assurance, and dimensions of quality assurance. The report takes the position that primary values…

  16. 10 CFR 76.93 - Quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance. 76.93 Section 76.93 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.93 Quality assurance. The Corporation shall establish, maintain, and execute a quality assurance program satisfying each...

  17. 40 CFR 31.45 - Quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Quality assurance. 31.45 Section 31.45... Requirements Reports, Records, Retention, and Enforcement § 31.45 Quality assurance. If the grantee's project... quality assurance practices consisting of policies, procedures, specifications, standards,...

  18. 40 CFR 30.54 - Quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Quality assurance. 30.54 Section 30.54... NON-PROFIT ORGANIZATIONS Post-Award Requirements Reports and Records § 30.54 Quality assurance. If the... data generation, the grantee shall develop and implement quality assurance practices consisting...

  19. Quality Assurance [for Persons with Developmental Disabilities].

    ERIC Educational Resources Information Center

    Lakin, Charlie, Ed.; And Others

    1993-01-01

    This newsletter feature issue focuses on quality assurance and innovative efforts to enhance service quality for persons with developmental disabilities. Individual articles include: "Redesigning Quality Assurance" (Clarence J. Sundram); "Quality Assurance, Quality Enhancement" (Charlie Lakin et al.); "Challenging Tradition: Measuring Quality by…

  20. Solar consumer assurance network briefing book

    SciTech Connect

    Connor, Lynda

    1980-06-01

    Background information is provided on the rationale and purpose of the Solar Consumer Assurance Network (SOLCAN) program. Mechanisms being instituted by states to meet solar consumer assurance needs are identified. Mechanisms being developed with Federal government support to encourage solar consumer assurance activities are described. The operation of the FY 80 SOLCAN effort is described. (MHR)

  1. 10 CFR 76.93 - Quality assurance.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 2 2012-01-01 2012-01-01 false Quality assurance. 76.93 Section 76.93 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.93 Quality assurance. The Corporation shall establish, maintain, and execute a quality assurance program satisfying each...

  2. 10 CFR 76.93 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 2 2011-01-01 2011-01-01 false Quality assurance. 76.93 Section 76.93 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.93 Quality assurance. The Corporation shall establish, maintain, and execute a quality assurance program satisfying each...

  3. 10 CFR 76.93 - Quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 2 2013-01-01 2013-01-01 false Quality assurance. 76.93 Section 76.93 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.93 Quality assurance. The Corporation shall establish, maintain, and execute a quality assurance program satisfying each...

  4. 10 CFR 76.93 - Quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 2 2014-01-01 2014-01-01 false Quality assurance. 76.93 Section 76.93 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.93 Quality assurance. The Corporation shall establish, maintain, and execute a quality assurance program satisfying each...

  5. Requirement Assurance: A Verification Process

    NASA Technical Reports Server (NTRS)

    Alexander, Michael G.

    2011-01-01

    Requirement Assurance is an act of requirement verification which assures the stakeholder or customer that a product requirement has produced its "as realized product" and has been verified with conclusive evidence. Product requirement verification answers the question, "did the product meet the stated specification, performance, or design documentation?". In order to ensure the system was built correctly, the practicing system engineer must verify each product requirement using verification methods of inspection, analysis, demonstration, or test. The products of these methods are the "verification artifacts" or "closure artifacts" which are the objective evidence needed to prove the product requirements meet the verification success criteria. Institutional direction is given to the System Engineer in NPR 7123.1A NASA Systems Engineering Processes and Requirements with regards to the requirement verification process. In response, the verification methodology offered in this report meets both the institutional process and requirement verification best practices.

  6. Assuring Life in Composite Systems

    NASA Technical Reports Server (NTRS)

    Chamis, Christos c.

    2008-01-01

    A computational simulation method is presented to assure life in composite systems by using dynamic buckling of smart composite shells as an example. The combined use of composite mechanics, finite element computer codes, and probabilistic analysis enable the effective assessment of the dynamic buckling load of smart composite shells. A universal plot is generated to estimate the dynamic buckling load of composite shells at various load rates and probabilities. The shell structure is also evaluated with smart fibers embedded in the plies right below the outer plies. The results show that, on the average, the use of smart fibers improved the shell buckling resistance by about 9% at different probabilities and delayed the buckling occurrence time. The probabilistic sensitivities results indicate that uncertainties in the fiber volume ratio and ply thickness have major effects on the buckling load. The uncertainties in the electric field strength and smart material volume fraction have moderate effects and thereby in the assured life of the shell.

  7. Safety Assurance in Obstetrical Ultrasound

    PubMed Central

    Miller, Douglas L

    2008-01-01

    Safety assurance for diagnostic ultrasound in obstetrics began with a tacit assumption of safety allowed by a federal law enacted in 1976 for then-existing medical ultrasound equipment. The implementation of the 510(k) pre-market approval process for diagnostic ultrasound resulted in the establishment of guideline upper limits for several examination categories in 1985. The obstetrical category has undergone substantial evolution from initial limits (I. e., 46 mW/cm2 spatial peak temporal average (SPTA) intensity) set in 1985. Thermal and mechanical exposure indices, which are displayed on-screen according to an Output Display Standard (ODS), were developed for safety assurance with relaxed upper limits. In 1992, with the adoption of the ODS, the allowable output for obstetrical ultrasound was increased both in terms of the average exposure (e. g. to a possible 720 mW/cm2 SPTA intensity) and of the peak exposure (via the Mechanical Index). There has been little or no subsequent research with the modern obstetrical ultrasound machines to systematically assess potential risks to the fetus using either relevant animal models of obstetrical exposure or human epidemiology studies. The assurance of safety for obstetrical ultrasound therefore is supported by three ongoing means: (I) review of a substantial but uncoordinated bioeffect research literature, (ii) the theoretical evaluation of diagnostic ultrasound exposure in terms of thermal and nonthermal mechanisms for bioeffects, and (iii) the skill and knowledge of professional sonographers. At this time, there is no specific reason to suspect that there is any significant health risk to the fetus or mother from exposure to diagnostic ultrasound in obstetrics. This assurance of safety supports the prudent use of diagnostic ultrasound in obstetrics by trained professionals for any medically indicated examination. PMID:18450141

  8. Safety assurance in obstetrical ultrasound.

    PubMed

    Miller, Douglas L

    2008-04-01

    Safety assurance for diagnostic ultrasound in obstetrics began with a tacit assumption of safety allowed by a federal law enacted in 1976 for then-existing medical ultrasound equipment. The implementation of the 510(k) pre-market-approval process for diagnostic ultrasound resulted in the establishment of guideline upper limits for several examination categories in 1985. The obstetrical category has undergone substantial evolution from initial limits (ie, 46 mW/cm2 spatial peak temporal average [SPTA] intensity) set in 1985. Thermal and mechanical exposure indices, which are displayed onscreen according to an Output Display Standard, were developed for safety assurance with relaxed upper limits. In 1992, with the adoption of the Output Display Standard, the allowable output for obstetrical ultrasound was increased in terms of both the average exposure (eg, to a possible 720 mW/cm2 SPTA intensity) and the peak exposure (via the Mechanical Index). There has been little or no subsequent research with the modern obstetrical ultrasound machines to systematically assess potential risks to the fetus using either relevant animal models of obstetrical exposure or human epidemiology studies. The assurance of safety for obstetrical ultrasound therefore is supported by three ongoing means: (1) review of a substantial but uncoordinated bioeffect research literature; (2) the theoretical evaluation of diagnostic ultrasound exposure in terms of thermal and nonthermal mechanisms for bioeffects; and (3) the skill and knowledge of professional sonographers. At this time, there is no specific reason to suspect that there is any significant health risk to the fetus or mother from exposure to diagnostic ultrasound in obstetrics. This assurance of safety supports the prudent use of diagnostic ultrasound in obstetrics by trained professionals for any medically indicated examination. PMID:18450141

  9. Assuring eating quality of meat.

    PubMed

    Dalen, G A

    1996-01-01

    The way of assuring quality has changed over the years, from inspection of end product to quality management systems and on-line process control. The latter concepts have had a great impact in many industries during the last decades. But the concept of Total Quality is continuos improvement so it is time to take advantage of the next generation of quality assurance tools: Quality by Design. This is the most powerful instrument in quality assurance today. Quality by design has been used with outstanding results in many industries as the automobile and the electronics industry. Maybe the meat industry will be the next? To succeed, the "eating quality attributes" that are most important to the customer must be brought into focus. The challenge to the meat research scientist is to design products and processes that take care of customer needs despite variation in the raw material and the consumer's rough handling. The Quality Management Standards are helpful in conducting the design and production process, but to focus on the right aspects, there also are need for suitable methods as Quality Function Deployment. Customer needs change and new research changes old 'truths'. This require an organisation, a quality system and a culture which can handle rapid changes and a diversity of customer needs. PMID:22060638

  10. Photovoltaic system criteria documents. Volume 2: Quality assurance criteria for photovoltaic applications

    NASA Technical Reports Server (NTRS)

    Koenig, John C.; Billitti, Joseph W.; Tallon, John M.

    1979-01-01

    Quality assurance criteria are described for manufacturers and installers of solar photovoltaic tests and applications. Quality oriented activities are outlined to be pursued by the contractor/subcontractor to assure the physical and operational quality of equipment produced is included. In the broad sense, guidelines are provided for establishing a QA organization if none exists. Mainly, criteria is provided to be considered in any PV quality assurance plan selected as appropriate by the responsible Field Center. A framework is established for a systematic approach to ensure that photovoltaic tests and applications are constructed in a timely and cost effective manner.

  11. 48 CFR 246.470 - Government contract quality assurance actions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... quality assurance actions. 246.470 Section 246.470 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 246.470 Government contract quality assurance actions....

  12. NASA/FAA experiments concerning helicopter IFR airworthiness criteria

    NASA Technical Reports Server (NTRS)

    Lebacqz, J. V.

    1983-01-01

    A sequence of ground and flight simulation experiments was conducted as part of a joint NASA/FAA program to investigate helicopter instrument flight rules (IFR) airworthiness criteria. The first six of these experiments are described and the results summarized. Five of the experiments were conducted on large amplitude motion base simulators; V/STOLAND UH-1H variable stability helicopter was used in the flight experiment. Airworthiness implications of selected variables that were investigated across all of the experiments are discussed, including the level of longitudinal static stability, the type of stability and control augmentation, the addition of flight director displays, and the type of instrument approach task. Among the specific results reviewed are the adequacy of neutral longitudinal statics for dual pilot approaches and the requirement for pitch and roll attitude stabilization in the stability and control augmentation system to achieve flying qualities evaluated as satisfactory.

  13. Tentative civil airworthiness flight criteria for powered-lift transports

    NASA Technical Reports Server (NTRS)

    Hynes, C. S.; Scott, B. C.

    1976-01-01

    Representatives of the U.S., British, French, and Canadian airworthiness authorities participated in a NASA/FAA program to formulate tentative civil airworthiness flight criteria for powered-lift transports. The ultimate limits of the flight envelope are defined by boundaries in the airspeed/path-angle plane. Angle of attack and airspeed margins applied to these ultimate limits provide protection against both atmospheric disturbances and disturbances resulting from pilot actions or system variability, but do not ensure maneuvering capability directly, as the 30% speed margin does for conventional transports. Separate criteria provide for direct demonstration of adequate capability for approach path control, flare and landing, and for go-around. Demonstration maneuvers are proposed, and appropriate abuses and failures are suggested. Taken together, these criteria should permit selection of appropriate operating points within the flight envelopes for the approach, landing, and go-around flight phases which are likely to be most critical for powered-lift aircraft.

  14. 78 FR 38823 - Airworthiness Directives; Bombardier, Inc. Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-28

    ...We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8-400 series airplanes. This AD was prompted by reports of chafing found on the main landing gear (MLG) yoke. The chafing was attributed to contact between the nacelle fire detection wires and the MLG yoke. This AD requires inspections of the nacelle fire detection wires and the MLG yoke for damage;......

  15. 78 FR 78703 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-27

    ...We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model DC-9-10, DC-9-30, and DC-9-40 series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that the aft pressure bulkhead web area is subject to widespread fatigue damage (WFD). This AD requires modifying the aft pressure bulkhead. The modification includes......

  16. 77 FR 73279 - Airworthiness Directives; Saab AB, Saab Aerosystems Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-10

    ...We are adopting a new airworthiness directive (AD) for certain Saab AB, Saab Aerosystems Model 340A (SAAB/SF340A) and SAAB 340B airplanes. This AD was prompted by reports of stall events during icing conditions where the natural stall warning (buffet) was not identified. This AD requires replacing the stall warning computer (SWC) with a new SWC, which provides an artificial stall warning in......

  17. 78 FR 25898 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-03

    ...We propose to supersede an existing airworthiness directive (AD) that applies to certain The Boeing Company Model 747 series airplanes. The existing AD currently requires inspection of the fuselage skin lap splice between body station (BS) 340 and BS 400 at stringers (S)-6L and S-6R, and repair, if necessary. Since we issued that AD, analysis results indicated that the protruding head fastener......

  18. 77 FR 58787 - Airworthiness Directives; Bombardier, Inc. Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-24

    ...We propose to supersede an existing airworthiness directive (AD) that applies to certain Bombardier, Inc. Model CL-600-2C10 (Regional Jet Series 700, 701, & 702) airplanes, Model CL-600-2D15 (Regional Jet Series 705) airplanes, and Model CL-600-2D24 (Regional Jet Series 900) airplanes. The existing AD currently requires repetitive inspections of the rudder travel limiter (RTL) return springs......

  19. 77 FR 41931 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-17

    ...We are revising an earlier proposed airworthiness directive (AD) for certain The Boeing Company Model 737-600, -700, -700C, -800, and -900 series airplanes. That NPRM proposed to require inspecting the orientation of both sides of the coil cord connector keyways of the number 2 windows on the flight deck; re-clocking the connector keyways to 12 o'clock, if necessary; and replacing the coil......

  20. 77 FR 55768 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-11

    ...We propose to adopt a new airworthiness directive (AD) for certain The. This proposed AD was prompted by a report that during a test of the oxygen system, an operator found that the passenger oxygen masks did not properly flow oxygen, and that a loud noise occurred in the overhead area, which was caused by the flex line separating from the hard line due to a missing clamshell coupler. This......

  1. 77 FR 54848 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-06

    ...We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 737-300, -400, -500, -600, -700, - 700C, -800, -900, and -900ER series airplanes. This proposed AD was prompted by a review of the tail strobe light installation, which revealed that the tail strobe light is not electrically bonded to primary structure of the airplane. This proposed AD would require......

  2. 76 FR 67631 - Airworthiness Directives; Cirrus Design Corporation Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-02

    ...We propose to adopt a new airworthiness directive (AD) for certain Cirrus Design Corporation (Cirrus) Model SR22T airplanes. This proposed AD was prompted by reports of partial loss of engine power due to a dislodged rubber gasket/seal being ingested into the turbocharger. This proposed AD would require inspection and modification of the air box flange welds and slots and installation of......

  3. 78 FR 14719 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-07

    ...We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 747SP series airplanes, and certain The Boeing Company Model 747-100B SUD and 747-300 series airplanes. This proposed AD was prompted by an evaluation by the design approval holder (DAH) indicating that the fuselage skin just above certain lap splice locations is subject to widespread fatigue damage (WFD).......

  4. 77 FR 69744 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-21

    ...We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 767-200 and -300 series airplanes. This AD was prompted by reports of cracks in the inner chords at both left-side and right-side stations 859.5, 883.5, and 903.5. This AD requires repetitive inspections of the frame inner chord transition radius for cracks, and related investigative and corrective actions......

  5. 78 FR 24338 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-25

    ...We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-900 and -900ER series airplanes. This AD was prompted by reports of early fatigue cracks at chem-mill areas on the crown skin panels. This AD requires repetitive inspections for cracking of the fuselage skin along chem-mill steps at certain crown skin and shear wrinkle areas, and repair if necessary. We......

  6. 77 FR 3187 - Airworthiness Directives; the Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-23

    ...We propose to adopt a new airworthiness directive (AD) for certain Model 767-200 and -300 series airplanes. This proposed AD was prompted by reports of fatigue cracking on the lower main sill inner chord of the hatch opening of the overwing emergency exit. This proposed AD would require repetitive inspections for cracking, corrosion damage, and any other irregularity of the lower main sill......

  7. 77 FR 5195 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-02

    ...We are revising an earlier proposed airworthiness directive (AD) for all Model 747-100B SUD, 747-300, 747-400, and 747-400D series airplanes; and Model 747-200B series airplanes having a stretched upper deck. The original NPRM would have superseded an existing AD that currently requires repetitively inspecting for cracking or discrepancies of the fasteners in the tension ties, shear webs, and......

  8. 77 FR 21420 - Airworthiness Directives; Cessna Aircraft Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-10

    ...We are adopting a new airworthiness directive (AD) for certain Cessna Aircraft Company Model 680 airplanes. This AD was prompted by a false cross-feed command to the right-hand fuel control card, due to the cross-feed inputs on the left- and right-hand fuel control cards being connected together and causing an imbalance of fuel between the left and right wing tanks. This AD requires adding......

  9. 77 FR 41045 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-12

    ...We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777-200, -200LR, -300, -300ER, and 777F series airplanes. This AD was prompted by a report indicating that a fire originated near the first officer's area, which caused extensive damage to the flight deck. This AD requires replacing the low-pressure oxygen hoses with non-conductive low-pressure oxygen hoses......

  10. 77 FR 55159 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-07

    ...We are revising an earlier proposed airworthiness directive (AD) for certain The Boeing Company Model 737-700, -700C, -800, and - 900ER series airplanes, Model 747-400F series airplanes, and Model 767- 200 and -300 series airplanes. That NPRM proposed to require an inspection for affected serial numbers of the crew oxygen mask stowage box units; and replacement of the crew oxygen mask stowage......

  11. 78 FR 63130 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-23

    ...We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 777F series airplanes. This proposed AD was prompted by a report of a fire that originated near the first officer's seat and caused extensive damage to the flight deck. This proposed AD would require replacing the low-pressure oxygen hoses with non-conductive low-pressure oxygen hoses in the stowage box......

  12. 77 FR 6518 - Airworthiness Directives; The Boeing Company Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-08

    ...We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 777-200, -200LR, -300, -300ER, and 777F series airplanes. This proposed AD was prompted by a report indicating that a fire originated near the first officer's area, which caused extensive damage to the flight deck. This proposed AD would require replacing the low-pressure oxygen hoses with......

  13. Radiation Hardness Assurance (RHA) Guideline

    NASA Technical Reports Server (NTRS)

    Campola, Michael J.

    2016-01-01

    Radiation Hardness Assurance (RHA) consists of all activities undertaken to ensure that the electronics and materials of a space system perform to their design specifications after exposure to the mission space environment. The subset of interests for NEPP and the REAG, are EEE parts. It is important to register that all of these undertakings are in a feedback loop and require constant iteration and updating throughout the mission life. More detail can be found in the reference materials on applicable test data for usage on parts.

  14. Quality assurance in orthodontic radiography.

    PubMed

    Brown, J E

    1995-02-01

    The implementation of a Quality Assurance (QA) programme in orthodontic radiography is designed to improve the quality of the resultant radiographs and to reduce the number of repeat exposures. This is particularly desirable in orthodontic practice where the majority of patients are young and therefore more at risk from the detrimental effects of X-rays. A programme is described and QA tests are given that may be applied in the surgery. Particular emphasis is placed on QA measures for extraoral radiography, since this is frequently undertaken in the treatment of the orthodontic patient. PMID:7786872

  15. Product Assurance for Spaceflight Hardware

    NASA Technical Reports Server (NTRS)

    Monroe, Mike

    1995-01-01

    This report contains information about the tasks I have completed and the valuable experience I have gained at NASA. The report is divided into two different sections followed by a program summary sheet. The first section describes the two reports I have completed for the Office of Mission Assurance (OMA). I describe the approach and the resources and facilities used to complete each report. The second section describes my experience working in the Receipt Inspection/Quality Assurance Lab (RI/QA). The first report described is a Product Assurance Plan for the Gas Permeable Polymer Materials (GPPM) mission. The purpose of the Product Assurance Plan is to define the various requirements which are to be met through completion of the GPPM mission. The GPPM experiment is a space payload which will be flown in the shuttle's SPACEHAB module. The experiment will use microgravity to enable production of complex polymeric gas permeable materials. The second report described in the first section is a Fracture Analysis for the Mir Environmental Effects Payload (MEEP). The Fracture Analysis report is a summary of the fracture control classifications for all structural elements of the MEEP. The MEEP hardware consists of four experiment carriers, each of which contains an experiment container holding a passive experiment. The MEEP hardware will be attached to the cargo bay of the space shuttle. It will be transferred by Extravehicular Activity and mounted on the Mir space station. The second section of this report describes my experiences in the RVQA lab. I listed the different equipment I used at the lab and their functions. I described the extensive inspection process that must be completed for spaceflight hardware. Included, at the end of this section, are pictures of most of the equipment used in the lab. There is a summary sheet located at the end of this report. It briefly describes the valuable experience I have gained at NASA this summer and what I will be able to take

  16. Helical tomotherapy dynamic quality assurance

    SciTech Connect

    Balog, John; Holmes, Tim; Vaden, Richard

    2006-10-15

    A multifaceted tomotherapy quality assurance procedure has been developed. This procedure tests most of the features inherent in the tomotherapy Hi-Art device. This includes the megavoltage imaging quality, spatial and temporal accuracy of the dynamic delivery properties, as well as more traditional beam output characteristics. This is accomplished with a specialized multichannel electrometer that measures collected charge every 100 ms and a Virtual Water cylindrical phantom that holds many ion chambers and differing density insert plugs. Both devices are offered with the Hi-Art product. These tests are presented as well as their sensitivity to beam and delivery variations.

  17. Quality assurance of the serologic diagnosis of Chagas' disease.

    PubMed

    Cura, E N; Segura, E L

    1998-04-01

    A quality assurance program of the Chagas' disease laboratory network of Argentina has been conducted by the National Reference Center since 1988, with the aim of assessing the reliability of serologic test results. Chagas' disease is endemic in Argentina, but the prevalence of seropositivity for Trypanosoma cruzi among 18- to 20-year-old men decreased from 5.8% in 1981 to 1.8% in 1994. About 600 laboratories form the Chagas' disease laboratory network, with main central laboratories in each of the 24 provinces in Argentina. The quality assurance program promotes regular use of good laboratory practice and internal and external quality control to improve performance of the participants; it also provides technical assistance and guidelines. Eventual corrective measures are discussed in workshops. Results of the first external evaluation by proficiency testing of serum panels and confirmation of results for 58 of the main laboratories reveal that from 1988 to 1994 the rate of agreement has increased. PMID:9608813

  18. Changing the Safety and Mission Assurance (S and MA) Paradigm

    NASA Technical Reports Server (NTRS)

    Malone, Roy W.; Safie, Fayssal M.

    2010-01-01

    This slide presentation reviews the change in the work and impact of the Safety and Mission Assurance directorate at Marshall Space Flight Center. It reviews the background and the reasons given for a strong Safety & Mission Assurance presence in all planning for space flight. This was pointed out by the Rogers Commission Report after the Space Challenger accident, by the Columbia Accident Investigation Board (CAIB) and by a 2006 NASA Exploration Safety Study (NESS) Team. The overall objective of the work in this area was to improve and maintain S&MA expertise and skills. Training for this work was improved and the S&MA organization was reorganized. This has resulted in a paradigm shift for NASA's safety efforts, which is described. The presentation then reviews the impact of the new S&MA work in the Ares I design and development.

  19. Quality assurance for gamma knives

    SciTech Connect

    Jones, E.D.; Banks, W.W.; Fischer, L.E.

    1995-09-01

    This report describes and summarizes the results of a quality assurance (QA) study of the Gamma Knife, a nuclear medical device used for the gamma irradiation of intracranial lesions. Focus was on the physical aspects of QA and did not address issues that are essentially medical, such as patient selection or prescription of dose. A risk-based QA assessment approach was used. Sample programs for quality control and assurance are included. The use of the Gamma Knife was found to conform to existing standards and guidelines concerning radiation safety and quality control of external beam therapies (shielding, safety reviews, radiation surveys, interlock systems, exposure monitoring, good medical physics practices, etc.) and to be compliant with NRC teletherapy regulations. There are, however, current practices for the Gamma Knife not covered by existing, formalized regulations, standards, or guidelines. These practices have been adopted by Gamma Knife users and continue to be developed with further experience. Some of these have appeared in publications or presentations and are slowly finding their way into recommendations of professional organizations.

  20. Quality Assurance: Patient Chart Reviews

    SciTech Connect

    Oginni, B. M.; Odero, D. O.

    2009-07-06

    Recent developments in radiation therapy have immensely impacted the way the radiation dose is delivered to patients undergoing radiation treatments. However, the fundamental quality assurance (QA) issues underlying the radiation therapy still remain the accuracy of the radiation dose and the radiation safety. One of the major duties of clinical medical physicists in the radiation therapy departments still revolves around ensuring the accuracy of dose delivery to the planning target volume (PTV), the reduction of unintended radiation to normal organs and minimization of the radiation exposure to the medical personnel based on ALARA (as low as reasonably achievable) principle. Many of the errors in radiation therapy can be minimized through a comprehensive program of periodic checks. One of the QA procedures on the patient comes in the form of chart reviews which could be in either electronic or paper-based format. We present the quality assurance procedures that have to be performed on the patient records from the beginning and periodically to the end of the treatment, based on the guidelines from the American Association of Physicists in Medicine (AAPM) and American College of Physicians (ACP)

  1. Quality assurance for purchased catalysts

    SciTech Connect

    Puls, F.H. )

    1988-09-01

    Petrochemical industries require many different types of catalysts in process operations. A significantly portion of these requirements is being met through purchases from merchant catalyst suppliers. The importance of catalysts and of catalyst quality to these industries cannot be overstated. It is not surprising that in the quest for quality which has affected much of US industry in the last few years, catalysts were among the first products which were singled out for development of quality assurance. Currently, catalyst supplier auditing and certification procedures are being implemented. Primary emphasis is on the implementation of statistical process control procedures in the manufacture of commercially available catalyst. Thus, a trend exists to move from quality assurance (QA) and quality control (QC) for purchased catalysts to statistical process control (SPC). This development is being supported by audits of the suppliers' manufacturing quality control systems. The keystone of quality management is the concept of customer and supplier working together for their mutual advantage. The focus in this presentation will be on two topics. (1) Fixed bed catalysts: The recognition of lot-to-lot variations led to purchase specifications which then led to quality control procedures for purchased catalysts. (2) Catalyst suppliers: the limitations of quality control for catalysts will be discussed, and the efforts of catalyst suppliers to apply SPC will be mentioned.

  2. Public health interactions with the public: can quality be assured? "This call may be monitored for quality assurance purposes".

    PubMed

    Berkelman, Ruth

    2004-01-01

    I describe what happened when a citizen called her state health department "after-hours" to report possible contamination of food at a commercial establishment. The call, inadequately handled by the health department, illustrates the need to assure quality of the public health responses to calls on a 24 hour, 7-day week basis. I examine possible reasons for the poor response. Health departments should consider training for those assigned to handle phone calls from the public, such as that provided to poison control center personnel. In addition, a quality assurance program should routinely assess the adequacy of public health responses. As medical care is available on an emergency basis, 24 hours a day, 7 days a week, emergency services for prevention of illness in the population should be available to the public at all times with the response provided by appropriately trained individuals. PMID:15134134

  3. Chiropractic quality assurance: standards and guidelines

    PubMed Central

    Gatterman, Meridel I; Dobson, Thomas P; LeFevbre, Ron

    2001-01-01

    Chiropractic quality assurance involves development of both clinical guidelines and standards. Confusion generated by poor differentiation of guidelines from standards contributes to mistrust of the guideline development process. Guidelines are considered to be recommendations that allow for flexibility and individual patient differences. Standards are more binding and require a high level of supporting evidence. While guidelines serve as educational tools to improve the quality of practice, standards that outline minimum competency are used more as administrative tools on which to base policy. Barriers to development of clinical guidelines and standards include fear that they will create prescriptive “cookbook” practice, and the distrust that guidelines are developed primarily for cost containment. Clinicians also criticize guidelines developed by academics that don't relate to practice, and those based on evidence that lacks clinical relevance. Conflicting guidelines perceived to be based on strong bias or conflict of interest are also suspect. To reduce barriers to acceptance and implementation, guidelines should be inclusive, patient-centered, and based on a variety of evidence and clinical experience.

  4. Professionalism, Profession and Quality Assurance Practitioners in External Quality Assurance Agencies in Higher Education

    ERIC Educational Resources Information Center

    Cheung, Jordan C. M.

    2015-01-01

    This article seeks to spark a dialectic discussion on the establishment of a set of professional competencies for quality assurance practitioners who serve in external quality assurance agencies in higher education. Such a need is identified due to the shortage of relevant and sufficient coverage in the quality assurance literature. To…

  5. The limits of sterility assurance

    PubMed Central

    von Woedtke, Thomas; Kramer, Axel

    2008-01-01

    Sterility means the absence of all viable microorganisms including viruses. At present, a sterility assurance level (SAL) of 10–6 is generally accepted for pharmacopoeial sterilization procedures, i.e., a probability of not more than one viable microorganism in an amount of one million sterilised items of the final product. By extrapolating the reduction rates following extreme artificial initial contamination, a theoretical overall performance of the procedure of at least 12 lg increments (overkill conditions) is demanded to verify an SAL of 10–6. By comparison, other recommendations for thermal sterilization procedures demand only evidence that the difference between the initial contamination and the number of test organisms at the end of the process amount to more than six orders of magnitude. However, a practical proof of the required level of sterility assurance of 10–6 is not possible. Moreover, the attainability of this condition is fundamentally dubious, at least in non-thermal procedures. Thus, the question is discussed whether the undifferentiated adherence to the concept of sterility assurance on the basis of a single SAL of 10–6 corresponds with the safety requirements in terms of patient or user safety, costs and energy efficiency. Therefore, in terms of practical considerations, a concept of tiered SALs is recommended, analogous to the comparable and well-established categorization into “High-level disinfection”, “Intermediate-level disinfection” and “Low-level disinfection”. The determination of such tiered SALs is geared both to the intended application of the sterilized goods, as well as to the characteristics of the products and the corresponding treatment options. In the case of aseptic preparation, filling and production procedures, a mean contamination probability of 10–3 is assumed. In automated processes, lower contamination rates can be realized. In the case of the production of re-usable medical devices, a reduction of

  6. 77 FR 20987 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-09

    ...; AD 2012-04-14] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce plc Turbofan Engines AGENCY..., Amendment 39-16970 (77 FR 13485, March 7, 2012), currently requires inspecting the front combustion...

  7. 78 FR 46303 - Airworthiness Directives; Fokker Services B.V. Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-31

    ... fuel system; and revising the airplane maintenance program by incorporating critical design... switch and subsequently, the implementation of the associated Critical Design Configuration Control...'' (66 FR 23086, May 7, 2001). In addition to new airworthiness standards for transport airplanes and...

  8. 14 CFR Appendix H to Part 25 - Instructions for Continued Airworthiness

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... zonal analysis procedure that includes: (i) Identification of each zone of the airplane. (ii... recommendations, and torque values. (g) A list of special tools needed. H25.4Airworthiness Limitations section....

  9. 76 FR 64003 - Airworthiness Directives; WYTWORNIA SPRZETU KOMUNIKACYJNEGO (WSK) “PZL-RZESZOW”-SPOLKA AKCYJNA...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-17

    ...: Airworthiness Directive 2011-18-07, Amendment 39-16789 (76 FR 57900, September 19, 2011), currently requires a one time inspection of spline teeth on the fuel metering pump shaft for excessive wear, for WSK...

  10. 78 FR 79599 - Airworthiness Directives; Various Aircraft Equipped With Wing Lift Struts

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-31

    ...: Airworthiness Directive 99-01-05 R1, Amendment 39-17688 (78 FR 73997, December 10, 2013), will require... published in the Federal Register on January 16, 2013 (78 FR 3356). No other part of the preamble...

  11. 75 FR 71353 - Airworthiness Directives; Mitsubishi Heavy Industries, Ltd. Various Models MU-2B Airplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-23

    ... Directive 2010-10-17, amendment 39-16296 (75 FR 34349), which supersedes Airworthiness Directive (AD) 2006...-140, 1200 New Jersey Avenue, SE., Washington, DC 20590. FOR FURTHER INFORMATION CONTACT: Matt...

  12. Making the Implicit Explicit: Towards an Assurance Case for DO-178C

    NASA Technical Reports Server (NTRS)

    Holloway, C. Michael

    2013-01-01

    For about two decades, compliance with Software Considerations in Airborne Systems and Equipment Certification (DO-178B) has been the primary means for receiving regulatory approval for using software on commercial airplanes. A new edition of the standard, DO-178C, was published in December 2011, and regulatory bodies have started the process towards recognizing this edition. The stated purpose of DO-178C remains unchanged from its predecessor: providing guidance “for the production of software for airborne systems and equipment that performs its intended function with a level of confidence in safety that complies with airworthiness requirements.” Within the text of the guidance, little or no rationale is given for how a particular objective or collection of objectives contributes to achieving this purpose. Thus the assurance case for the document is implicit. This paper discusses a current effort to make the implicit explicit. In particular, the paper describes the current status of the research seeking to identify the specific arguments contained in, or implied by, the DO-178C guidance that implicitly justify the assumption that the document meets its stated purpose.

  13. 78 FR 28727 - Airworthiness Directives; Agusta S.p.A. Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-16

    ...-031-AD; Amendment 39-17448; AD 2013-09-06] RIN 2120-AA64 Airworthiness Directives; Agusta S.p.A... superseding an existing airworthiness directive (AD) for ] Agusta S.p.A. (Agusta) Model A119 and AW119 MKII....regulations.gov or in person at the Docket Operations Office between 9 a.m. and 5 p.m., Monday through...

  14. 78 FR 18228 - Airworthiness Directives; Agusta S.p.A. Helicopters

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-26

    ... 2009-SW-46-AD; Amendment 39-17394; AD 2013-05-22] RIN 2120-AA64 Airworthiness Directives; Agusta S.p.A... new airworthiness directive (AD) for all Agusta S.p.A. (Agusta) Model A109, A109A, A109A II, A109C... Operations Office between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD...

  15. 78 FR 37703 - Airworthiness Directives; Rolls-Royce plc Turbofan Engines

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-24

    ...-47-AD; Amendment 39-17478; AD 2013-12-01] RIN 2120-AA64 Airworthiness Directives; Rolls-Royce plc... adopting a new airworthiness directive (AD) for all Rolls-Royce plc (RR) model RB211 Trent 768-60, 772-60.... 39.13 by adding the following new AD: 2013-12-01 Rolls-Royce plc: Amendment 39-17478; Docket No....

  16. 77 FR 47275 - Airworthiness Directives; HPH s. r.o. Sailplanes

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-08

    ...We are adopting a new airworthiness directive (AD) for all HPH s. r.o. Models 304C, 304CZ, and 304CZ-17 sailplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as the lack of a drain hole in the elevator......

  17. Teacher Reaction to ICP Quality Assurance Procedures.

    ERIC Educational Resources Information Center

    Leonard, Ann

    An integral part of the Quality Assurance Manual developed by Southwest Regional Laboratory (SWRL) to accompany the Kindergarten Program is the end-of-program assessment of the Instructional Concepts Program (ICP). Following completion of ICP Quality Assurance assessment, four teachers were interviewed in order to gather information pertinent to…

  18. Safety and Mission Assurance: A NASA Perspective

    NASA Technical Reports Server (NTRS)

    Higginbotham, Scott Alan

    2011-01-01

    Safety and Mission Assurance (S&MA) consists of the safety, reliability, maintainability, software assurance and quality disciplines, which are applied to reduce the probability of mishaps and ensure mission success. NASA uses a risk management process which requires various organizations to identify, analyze and mitigate/control risks associated with operations and decision making processes.

  19. 40 CFR 194.22 - Quality assurance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...); corroborating data; confirmatory testing; or a quality assurance program that is equivalent in effect to ASME... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Quality assurance. 194.22 Section 194... COMPLIANCE WITH THE 40 CFR PART 191 DISPOSAL REGULATIONS Compliance Certification and...

  20. 40 CFR 194.22 - Quality assurance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...); corroborating data; confirmatory testing; or a quality assurance program that is equivalent in effect to ASME... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Quality assurance. 194.22 Section 194... COMPLIANCE WITH THE 40 CFR PART 191 DISPOSAL REGULATIONS Compliance Certification and...

  1. 40 CFR 194.22 - Quality assurance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...); corroborating data; confirmatory testing; or a quality assurance program that is equivalent in effect to ASME... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Quality assurance. 194.22 Section 194... COMPLIANCE WITH THE 40 CFR PART 191 DISPOSAL REGULATIONS Compliance Certification and...

  2. Tool Use Within NASA Software Quality Assurance

    NASA Technical Reports Server (NTRS)

    Shigeta, Denise; Port, Dan; Nikora, Allen P.; Wilf, Joel

    2013-01-01

    As space mission software systems become larger and more complex, it is increasingly important for the software assurance effort to have the ability to effectively assess both the artifacts produced during software system development and the development process itself. Conceptually, assurance is a straightforward idea - it is the result of activities carried out by an organization independent of the software developers to better inform project management of potential technical and programmatic risks, and thus increase management's confidence in the decisions they ultimately make. In practice, effective assurance for large, complex systems often entails assessing large, complex software artifacts (e.g., requirements specifications, architectural descriptions) as well as substantial amounts of unstructured information (e.g., anomaly reports resulting from testing activities during development). In such an environment, assurance engineers can benefit greatly from appropriate tool support. In order to do so, an assurance organization will need accurate and timely information on the tool support available for various types of assurance activities. In this paper, we investigate the current use of tool support for assurance organizations within NASA, and describe on-going work at JPL for providing assurance organizations with the information about tools they need to use them effectively.

  3. Exploring Quality Assurance in Sixth Form Colleges

    ERIC Educational Resources Information Center

    Stoten, David William

    2012-01-01

    Purpose: This paper aims to focus on the changing nature of quality assurance systems within the sixth form college sector. Design/methodology/approach: Ten sixth form colleges were surveyed across England and staff from varying levels within college hierarchies questioned about how quality assurance systems were implemented. Research involved…

  4. 42 CFR 441.464 - State assurances.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Self-Directed Personal Assistance Services Program § 441.464 State assurances. A State must assure that... financial accountability for funds expended for self-directed services. (1) Safeguards must prevent the... require self-directed PAS. (3) May be eligible for self-directed PAS. (c) Notification of...

  5. 42 CFR 441.464 - State assurances.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Self-Directed Personal Assistance Services Program § 441.464 State assurances. A State must assure that... financial accountability for funds expended for self-directed services. (1) Safeguards must prevent the... require self-directed PAS. (3) May be eligible for self-directed PAS. (c) Notification of...

  6. 42 CFR 441.464 - State assurances.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Self-Directed Personal Assistance Services Program § 441.464 State assurances. A State must assure that... financial accountability for funds expended for self-directed services. (1) Safeguards must prevent the... require self-directed PAS. (3) May be eligible for self-directed PAS. (c) Notification of...

  7. 14 CFR 152.405 - Assurances.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... grantee assures that it will undertake an affirmative action program, as required by 14 CFR part 152... CFR part 152, subpart E. The grantee assures that no person shall be excluded, on these grounds, from... their suborganizations, as required by 14 CFR part 152, subpart E, to the same effect. (b)...

  8. Quality Assurance in Sub-Saharan Africa

    ERIC Educational Resources Information Center

    Materu, Peter; Righetti, Petra

    2010-01-01

    This article assesses the status and practice of higher education quality assurance in sub-Saharan Africa, focusing on degree-granting tertiary institutions. A main finding is that structured national-level quality assurance processes in African higher education are a very recent phenomenon and that most countries face major capacity constraints.…

  9. 48 CFR 2453.246 - Quality Assurance.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Quality Assurance. 2453.246 Section 2453.246 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT CLAUSES AND FORMS FORMS Prescription of Forms 2453.246 Quality Assurance....

  10. 30 CFR 74.9 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... CFR part 51. Persons may obtain a copy from the International Organization for Standardization at the... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Quality assurance. 74.9 Section 74.9 Mineral... DUST SAMPLING DEVICES Requirements for Continuous Personal Dust Monitors § 74.9 Quality assurance....

  11. 30 CFR 15.8 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Quality assurance. 15.8 Section 15.8 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... § 15.8 Quality assurance. (a) Applicants granted an approval or an extension of approval under...

  12. 7 CFR 652.7 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 6 2011-01-01 2011-01-01 false Quality assurance. 652.7 Section 652.7 Agriculture... AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.7 Quality assurance. (a) NRCS will review, in consultation with the Farm Service Agency, as appropriate, the...

  13. 30 CFR 7.7 - Quality assurance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Quality assurance. 7.7 Section 7.7 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY General § 7.7 Quality assurance. Applicants...

  14. Quality Assurance in Chinese Higher Education

    ERIC Educational Resources Information Center

    Li, Yuan

    2010-01-01

    Quality assurance has been integrated into the fabric of higher education in China, with the issue of quality in higher education--how to evaluate it and how to enhance it--now taking centre stage in Chinese higher education. In the past decade, the development of quality assurance in Chinese higher education has covered a broad spectrum of…

  15. 18 CFR 1307.7 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 18 Conservation of Power and Water Resources 2 2010-04-01 2010-04-01 false Assurances required. 1307.7 Section 1307.7 Conservation of Power and Water Resources TENNESSEE VALLEY AUTHORITY NONDISCRIMINATION WITH RESPECT TO HANDICAP § 1307.7 Assurances required. (a) TVA contributes financial...

  16. 13 CFR 113.115 - Assurance required.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Assurance required. 113.115 Section 113.115 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NONDISCRIMINATION IN... Introduction § 113.115 Assurance required. (a) General. Either at the application stage or the award...

  17. 38 CFR 18.4 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... property are subject to regulations issued by the Administrator of General Services (41 CFR subpart 101-6.2... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Assurances required. 18.4... THE CIVIL RIGHTS ACT OF 1964 General § 18.4 Assurances required. (a) General. (1) Every...

  18. 45 CFR 1203.5 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Assurances required. 1203.5 Section 1203.5 Public... Assurances required. (a) General. (1) An application for Federal financial assistance to which this part... of Federal financial assistance pursuant to the application, contain or be accompanied by,...

  19. 18 CFR 1302.5 - Assurances required.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 18 Conservation of Power and Water Resources 2 2010-04-01 2010-04-01 false Assurances required. 1302.5 Section 1302.5 Conservation of Power and Water Resources TENNESSEE VALLEY AUTHORITY... § 1302.5 Assurances required. (a) TVA contributes financial assistance only under agreements...

  20. Quality Assurance Reconsidered: A Case Study

    ERIC Educational Resources Information Center

    Gynnild, Vidar

    2007-01-01

    This article examines an external evaluation of the quality assurance system at the Norwegian University of Science and Technology (NTNU) conducted by The Norwegian Agency for Quality Assurance in Higher Education (NOKUT). The external audit report along with internal reports provided by the seven faculties of the university served as the major…