Science.gov

Sample records for akf bidirectional filter

  1. Günther Tulip inferior vena cava filter retrieval using a bidirectional loop-snare technique.

    PubMed

    Ross, Jordan; Allison, Stephen; Vaidya, Sandeep; Monroe, Eric

    2016-01-01

    Many advanced techniques have been reported in the literature for difficult Günther Tulip filter removal. This report describes a bidirectional loop-snare technique in the setting of a fibrin scar formation around the filter leg anchors. The bidirectional loop-snare technique allows for maximal axial tension and alignment for stripping fibrin scar from the filter legs, a commonly encountered complication of prolonged dwell times.

  2. Practical application of a bidirectional microwave photonic filter: simultaneous transmission of analog TV signals

    NASA Astrophysics Data System (ADS)

    Correa-Mena, Ana Gabriela; Zaldívar-Huerta, Ignacio E.; Abril García, Jose Humberto; García-Juárez, Alejandro; Vera-Marquina, Alicia

    2016-10-01

    A practical application of a bidirectional microwave photonic filter (MPF) to transmit simultaneous analog TV signals coded on microwave carriers is experimentally demonstrated. The frequency response of the bidirectional MPF is obtained by the interaction of an externally modulated multimode laser diode emitting at 1.55 μm associated to the free-spectral range of the optical source, the chromatic dispersion parameter of the optical fiber, as well as the length of the optical link. The filtered microwave bandpass window generated around 2 GHz is used as electrical carrier in order to simultaneously transmit TV signals of 67.25 and 61.25 MHz in both directions. The obtained signal-to-noise ratios for the transmitted signals of 67.25 and 61.25 MHz are 37.62 and 44.77 dB, respectively.

  3. Demonstration and experimental evaluation of a bi-directional 10-GHz microwave photonic filter

    NASA Astrophysics Data System (ADS)

    Zaldívar-Huerta, I. E.; Correa-Mena, A. G.; Hernández-Nava, P.; García-Juárez, A.; Rodríguez-Asomoza, J.; Lee, Min Won

    2016-09-01

    A bi-directional 10-GHz microwave photonic filter is proposed and experimentally evaluated. Its frequency response consists of a series of microwave band-pass windows obtained by the interaction of externally modulated multimode laser diodes emitting around of 1550 nm associated to the chromatic dispersion parameter of an optical fiber, as well as the length of the optical link. Microwave band-pass windows exhibit on average a-3 dB bandwidth of 378 MHz. This electro-optical system shows an efficient configuration and good performance. Potentially, filtered microwave signals can be used as electrical carriers in optical communication systems to transmit and distribute services such as video, voice and data.

  4. The Performance Analysis of AN Akf Based Tightly-Coupled Ins/gps Integrated Positioning and Orientation Scheme with Odometer and Non-Holonomic Constraints

    NASA Astrophysics Data System (ADS)

    Peng, K.-Y.; Lin, C.-A.; Chiang, K.-W.

    2012-08-01

    INS/GPS integration scheme can overcome the shortcoming of GPS or INS alone to provide superior performance, thus this study implements a tightly-coupled INS/GPS integration scheme using AKF as the core estimator by tuning the measurement noise matrix R adaptively. The AKF is based on the maximum likelihood criterion for choosing the most appropriate weight and thus the Kalman gain factors. The conventional EKF implementation suffers uncertain results while the update measurement noise matrix R and/or the process noise matrix Q does not meet the case. The primary advantage of AKF is that the filter has less relationship with the priori statistical information because R and/or Q vary with time. The innovation sequence is used to derive the measurement weights through the covariance matrices, innovation-based adaptive estimation (IAE) in this study. The covariance matrices R are adapted in the study when measurements update with time. A window based approach is implemented to update the quality of GPS pseudo-range measurements by adaptively replace the measurement weights through the latest estimated covariance matrices R. The use of odometer is particularly recommended when a low cost and precise vehicle localization system has to be implemented and there is the risk of GPS coverage failure, which is prone to happen when the vehicle enters a tunnel or cross deep valleys. Odometers are applied in land-vehicle navigation to provide augmented host velocity observations for standalone INS system in this study. There are two non-holonomic constraints (NHC) available for land vehicles. Land vehicles will not jump off the ground or slid on the ground under normal condition. Using these constraints, the velocity of the vehicle in the plane perpendicular to the forward direction is almost zero. EKF and AKF based tightly-coupled scheme with NHC is implemented in the study. To validate the performance of AKF based tightly-coupled INS/GPS integration scheme with odometer and

  5. Bidirectional scatter measurements of a guided-mode resonant filter photonic crystal structure.

    PubMed

    Marciniak, M A; Sellers, S R; Lamott, R B; Cunningham, B T

    2012-12-03

    This work investigates the Bidirectional Scatter Distribution Function (BSDF) at incident angles other than normal and at 544-nm wavelength of a Guided Mode Resonance Filter (GMRF) Photonic Crystal (PC) structure designed for normally incident light at 532 nm. Strong out-coupling of PC diffraction orders into both the transmitted and reflected hemispheres was observed specifically at a 25.7° incidence angle, which we attribute to this incident angle/wavelength pair being a good match to the ( ± 1, 0) PC grating mode. BSDF measurements at incident angles of 15° and 35° also displayed some out-coupled diffraction, though much lower in magnitude, and are also attributed to being a weaker match to the ( ± 1, 0) PC grating mode. Three-dimensional finite-difference time-domain Maxwell's equation simulations demonstrate that since this GMRF was designed for complete destructive interference of the transmitted light upon normal incidence, stronger out-coupling of the diffraction is expected for modal solutions as the angle of incidence increases.

  6. Novel bidirectional optical subassembly with embedded filter, 45-degree angle polished fiber cladding and etched fiber core

    NASA Astrophysics Data System (ADS)

    Lee, Seihyoung; Lim, Kwon-Seob; Lee, Jong Jin; Kang, Hyun Seo

    2009-10-01

    The optical wavelength-division-multiplex filter for bidirectional optical subassembly (BOSA) is embedded to the fiber core, which results in simplicity of the BOSA module. The fiber cladding is 45-deg angle polished to receive a downstream signal. The core is etched by a femtosecond laser to have a normal core facet and to transmit an upstream signal. The downstream signal, which is core mode, is coupled to the cladding mode by the long-period fiber grating and then detected by a photodiode by means of the total internal reflection effect at the 45-deg angle polished cladding facet. The measured transmitted and received coupling efficiencies are 27.3 and 43.8%, respectively.

  7. Bidirectional amplifier

    DOEpatents

    Wright, James T.

    1986-01-01

    A bilateral circuit is operable for transmitting signals in two directions without generation of ringing due to feedback caused by the insertion of the circuit. The circuit may include gain for each of the signals to provide a bidirectional amplifier. The signals are passed through two separate paths, with a unidirectional amplifier in each path. A controlled sampling device is provided in each path for sampling the two signals. Any feedback loop between the two signals is disrupted by providing a phase displacement between the control signals for the two sampling devices.

  8. Bidirectional amplifier

    DOEpatents

    Wright, J.T.

    1984-02-02

    A bilateral circuit is operable for transmitting signals in two directions without generation of ringing due to feedback caused by the insertion of the circuit. The circuit may include gain for each of the signals to provide a bidirectional amplifier. The signals are passed through two separate paths, with a unidirectional amplifier in each path. A controlled sampling device is provided in each path for sampling the two signals. Any feedback loop between the two signals is disrupted by providing a phase displacement between the control signals for the two sampling devices.

  9. Rapid Transfer Alignment of MEMS SINS Based on Adaptive Incremental Kalman Filter

    PubMed Central

    Chu, Hairong; Sun, Tingting; Zhang, Baiqiang; Zhang, Hongwei; Chen, Yang

    2017-01-01

    In airborne MEMS SINS transfer alignment, the error of MEMS IMU is highly environment-dependent and the parameters of the system model are also uncertain, which may lead to large error and bad convergence of the Kalman filter. In order to solve this problem, an improved adaptive incremental Kalman filter (AIKF) algorithm is proposed. First, the model of SINS transfer alignment is defined based on the “Velocity and Attitude” matching method. Then the detailed algorithm progress of AIKF and its recurrence formulas are presented. The performance and calculation amount of AKF and AIKF are also compared. Finally, a simulation test is designed to verify the accuracy and the rapidity of the AIKF algorithm by comparing it with KF and AKF. The results show that the AIKF algorithm has better estimation accuracy and shorter convergence time, especially for the bias of the gyroscope and the accelerometer, which can meet the accuracy and rapidity requirement of transfer alignment. PMID:28098829

  10. Rapid Transfer Alignment of MEMS SINS Based on Adaptive Incremental Kalman Filter.

    PubMed

    Chu, Hairong; Sun, Tingting; Zhang, Baiqiang; Zhang, Hongwei; Chen, Yang

    2017-01-14

    In airborne MEMS SINS transfer alignment, the error of MEMS IMU is highly environment-dependent and the parameters of the system model are also uncertain, which may lead to large error and bad convergence of the Kalman filter. In order to solve this problem, an improved adaptive incremental Kalman filter (AIKF) algorithm is proposed. First, the model of SINS transfer alignment is defined based on the "Velocity and Attitude" matching method. Then the detailed algorithm progress of AIKF and its recurrence formulas are presented. The performance and calculation amount of AKF and AIKF are also compared. Finally, a simulation test is designed to verify the accuracy and the rapidity of the AIKF algorithm by comparing it with KF and AKF. The results show that the AIKF algorithm has better estimation accuracy and shorter convergence time, especially for the bias of the gyroscope and the accelerometer, which can meet the accuracy and rapidity requirement of transfer alignment.

  11. Study on GPS attitude determination system aided INS using adaptive Kalman filter

    NASA Astrophysics Data System (ADS)

    Bian, Hongwei; Jin, Zhihua; Tian, Weifeng

    2005-10-01

    A marine INS/GPS (inertial navigation system/global positioning system) adaptive navigation system is presented in this paper. The GPS with two antennae providing vessel attitude is selected as the auxiliary system to fuse with INS. The Kalman filter is the most frequently used algorithm in the integrated navigation system, which is capable of estimating INS errors online based on the measured errors between INS and GPS. The conventional Kalman filter (CKF) assumes that the statistics of the noise of each sensor are given. As long as the noise distributions do not change, the Kalman filter will give the optimal estimation. However, the GPS receiver will be disturbed easily and thus temporally changing measurement noise will join into the outputs of GPS, which will lead to performance degradation of the Kalman filter. Many researchers introduce a fuzzy logic control method into innovation-based adaptive estimation Kalman filtering (IAE-AKF) algorithm, and accordingly propose various adaptive Kalman filters. However, how to design the fuzzy logic controller is a very complicated problem, which is still without a convincing solution. A novel IAE-AKF is proposed herein, which is based on the maximum likelihood criterion for the proper computation of the filter innovation covariance and hence of the filter gain. The approach is direct and simple without having to establish fuzzy inference rules. After having deduced the proposed IAE-AKF algorithm theoretically in detail, the approach is tested in the developed INS/GPS integrated marine navigation system. Real field test results show that the adaptive Kalman filter outperforms the CKF with higher accuracy and robustness. It is demonstrated that this proposed approach is a valid solution for the unknown changing measurement noise existing in the Kalman filter.

  12. Bidirectional Neural Interfaces

    PubMed Central

    Masters, Matthew R.; Thakor, Nitish V.

    2016-01-01

    A bidirectional neural interface is a device that transfers information into and out of the nervous system. This class of devices has potential to improve treatment and therapy in several patient populations. Progress in very-large-scale integration (VLSI) has advanced the design of complex integrated circuits. System-on-chip (SoC) devices are capable of recording neural electrical activity and altering natural activity with electrical stimulation. Often, these devices include wireless powering and telemetry functions. This review presents the state of the art of bidirectional circuits as applied to neuroprosthetic, neurorepair, and neurotherapeutic systems. PMID:26753776

  13. Bidirectional slapper detonator

    DOEpatents

    McCormick, Robert N.; Boyd, Melissa D.

    1984-01-01

    The disclosure is directed to a bidirectional slapper detonator. One embodiment utilizes a single bridge circuit to detonate a pair of opposing initiating pellets. A line generator embodiment uses a plurality of bridges in electrical series to generate opposing cylindrical wavefronts.

  14. Bidirectional ventricular tachycardia?

    PubMed

    Serra, José L; Caresani, Julian A; Bono, Julio O

    2014-01-01

    A 65-year-old woman was admitted to the hospital because of a syncopal episode with documented transient complete atrioventricular block. A DDD pacemaker was implanted. Post implantation, the patient was diagnosed with bidirectional ventricular tachycardia. Analysis of the arrhythmia and differential diagnosis is performed.

  15. Bidirectional reflectance of zinc oxide

    NASA Technical Reports Server (NTRS)

    Scott, R.

    1973-01-01

    This investigation was undertaken to determine original and useful information about the bidirection reflectance of zinc oxide. The bidirectional reflectance will be studied for the spectra between .25-2.5 microns and the hemisphere above the specimen. The following factors will be considered: (1) surface conditions; (2) specimen preparation; (3) specimen substrate, (4) polarization; (5) depolarization; (6) wavelength; and (7) angles of incident and reflection. The bidirectional reflectance will be checked by experimentally determined angular hemispherical measurements or hemispherical measurements will be used to obtain absolute bidirectional reflectance.

  16. Optical Bidirectional Associative Memories

    NASA Astrophysics Data System (ADS)

    Kosko, Bart; Guest, Clark

    1987-06-01

    Four optical implementations of bidirectional associative memories (BAMs) are presented. BAMs are heteroassociative content addressable memories (CAMs). A BAM stores the m binary associations (A1, B1), ..., (Am, Bm) , where A is a point in the Boolean n-cube and B is a point in the Boolean p-cube. A is a neural network of n bivalent or continuous neurons ai; B is a network of p bivalent or continuous neurons bi. The fixed synaptic connections between the A and B networks are represented by some n-by-p real matrix M. Bidirectionality, forward and backward information flow, in neural nets produces two-way associative search for the nearest stored pair (Ai, Bi) to an input key. Every matrix is a bidirectionally stable hetero-associative CAM for boh bivalent and continuous networks. This generalizes the well-known unidirectional stability for autoassociative networks with square symmetric M. When the BAM neurons are activated, the network quickly evolves to a stable state of two-pattern reverberation, or pseudo-adaptive resonance. The stable reverberation corresponds to a system energy local minimum. Heteroassociative pairs (Ai, Bi) are encoded in a BAM M by summing bipolar correlation matrices, M = X1T Y1 + ... + XmT Ym , where Xi (Yi) is the bipolar version of Ai (Bi), with -1s replacing Os. the BAM storage capacity for reliable recall is roughly m < min(n, p)--pattern number is bounded by pattern dimensionality. BAM optical implementations are divided into two approaches: matrix vector multipliers and holographic correlators. The four optical BAMs described respectively emphasize a spatial light modulator, laser diodes and high-speed detectors, a reflection hologram, and a transmission hologram.

  17. ac bidirectional motor controller

    NASA Technical Reports Server (NTRS)

    Schreiner, K.

    1988-01-01

    Test data are presented and the design of a high-efficiency motor/generator controller at NASA-Lewis for use with the Space Station power system testbed is described. The bidirectional motor driver is a 20 kHz to variable frequency three-phase ac converter that operates from the high-frequency ac bus being designed for the Space Station. A zero-voltage-switching pulse-density-modulation technique is used in the converter to shape the low-frequency output waveform.

  18. Bidirectional Brush Seals

    NASA Technical Reports Server (NTRS)

    Hendricks, Robert C.; Wilson, Jack; Wu, Tom; Flower, Ralph

    1997-01-01

    Presented is a study of the use of a set of I.D./O.D. bidirectional press seals to reduce the leakage losses in a wave rotor. Relative to the baseline configuration, data indicate the use of brush seals enhanced wave rotor efficiency from 36 to 45 percent at low leakages (small rotor endwall gap spacings) and from 15 to 33 percent at high leakages (larger endwall gap spacings). These brush seals are capable of sealing positive or negative pressure drops with respect to the axial direction. Surface tribology for these tests suggested little evidence of grooving although the bristles appeared polished.

  19. Bidirectional Pressure-Regulator System

    NASA Technical Reports Server (NTRS)

    Burke, Kenneth; Miller, John R.

    2008-01-01

    A bidirectional pressure-regulator system has been devised for use in a regenerative fuel cell system. The bidirectional pressure-regulator acts as a back-pressure regulator as gas flows through the bidirectional pressure-regulator in one direction. Later, the flow of gas goes through the regulator in the opposite direction and the bidirectional pressure-regulator operates as a pressure- reducing pressure regulator. In the regenerative fuel cell system, there are two such bidirectional regulators, one for the hydrogen gas and another for the oxygen gas. The flow of gases goes from the regenerative fuel cell system to the gas storage tanks when energy is being stored, and reverses direction, flowing from the storage tanks to the regenerative fuel cell system when the stored energy is being withdrawn from the regenerative fuel cell system. Having a single bidirectional regulator replaces two unidirectional regulators, plumbing, and multiple valves needed to reverse the flow direction. The term "bidirectional" refers to both the bidirectional nature of the gas flows and capability of each pressure regulator to control the pressure on either its upstream or downstream side, regardless of the direction of flow.

  20. A Statistical Theory of Bidirectionality

    NASA Technical Reports Server (NTRS)

    DeLoach, Richard; Ulbrich, Norbert

    2013-01-01

    Original concepts related to the quantification and assessment of bidirectionality in strain-gage balances were introduced by Ulbrich in 2012. These concepts are extended here in three ways: 1) the metric originally proposed by Ulbrich is normalized, 2) a categorical variable is introduced in the regression analysis to account for load polarity, and 3) the uncertainty in both normalized and non-normalized bidirectionality metrics is quantified. These extensions are applied to four representative balances to assess the bidirectionality characteristics of each. The paper is tutorial in nature, featuring reviews of certain elements of regression and formal inference. Principal findings are that bidirectionality appears to be a common characteristic of most balance outputs and that unless it is taken into account, it is likely to consume the entire error budget of a typical balance calibration experiment. Data volume and correlation among calibration loads are shown to have a significant impact on the precision with which bidirectionality metrics can be assessed.

  1. Bidirectional buck boost converter

    DOEpatents

    Esser, A.A.M.

    1998-03-31

    A bidirectional buck boost converter and method of operating the same allows regulation of power flow between first and second voltage sources in which the voltage level at each source is subject to change and power flow is independent of relative voltage levels. In one embodiment, the converter is designed for hard switching while another embodiment implements soft switching of the switching devices. In both embodiments, first and second switching devices are serially coupled between a relatively positive terminal and a relatively negative terminal of a first voltage source with third and fourth switching devices serially coupled between a relatively positive terminal and a relatively negative terminal of a second voltage source. A free-wheeling diode is coupled, respectively, in parallel opposition with respective ones of the switching devices. An inductor is coupled between a junction of the first and second switching devices and a junction of the third and fourth switching devices. Gating pulses supplied by a gating circuit selectively enable operation of the switching devices for transferring power between the voltage sources. In the second embodiment, each switching device is shunted by a capacitor and the switching devices are operated when voltage across the device is substantially zero. 20 figs.

  2. Bidirectional buck boost converter

    DOEpatents

    Esser, Albert Andreas Maria

    1998-03-31

    A bidirectional buck boost converter and method of operating the same allows regulation of power flow between first and second voltage sources in which the voltage level at each source is subject to change and power flow is independent of relative voltage levels. In one embodiment, the converter is designed for hard switching while another embodiment implements soft switching of the switching devices. In both embodiments, first and second switching devices are serially coupled between a relatively positive terminal and a relatively negative terminal of a first voltage source with third and fourth switching devices serially coupled between a relatively positive terminal and a relatively negative terminal of a second voltage source. A free-wheeling diode is coupled, respectively, in parallel opposition with respective ones of the switching devices. An inductor is coupled between a junction of the first and second switching devices and a junction of the third and fourth switching devices. Gating pulses supplied by a gating circuit selectively enable operation of the switching devices for transferring power between the voltage sources. In the second embodiment, each switching device is shunted by a capacitor and the switching devices are operated when voltage across the device is substantially zero.

  3. Bidirectional DC/DC Converter

    NASA Astrophysics Data System (ADS)

    Pedersen, F.

    2008-09-01

    The presented bidirectional DC/DC converter design concept is a further development of an already existing converter used for low battery voltage operation.For low battery voltage operation a high efficient low parts count DC/DC converter was developed, and used in a satellite for the battery charge and battery discharge function.The converter consists in a bidirectional, non regulating DC/DC converter connected to a discharge regulating Buck converter and a charge regulating Buck converter.The Bidirectional non regulating DC/DC converter performs with relatively high efficiency even at relatively high currents, which here means up to 35Amps.This performance was obtained through the use of power MOSFET's with on- resistances of only a few mille Ohms connected to a special transformer allowing paralleling several transistor stages on the low voltage side of the transformer. The design is patent protected. Synchronous rectification leads to high efficiency at the low battery voltages considered, which was in the range 2,7- 4,3 Volt DC.The converter performs with low switching losses as zero voltage zero current switching is implemented in all switching positions of the converter.Now, the drive power needed, to switch a relatively large number of low Ohm , hence high drive capacitance, power MOSFET's using conventional drive techniques would limit the overall conversion efficiency.Therefore a resonant drive consuming considerable less power than a conventional drive circuit was implemented in the converter.To the originally built and patent protected bidirectional non regulating DC/DC converter, is added the functionality of regulation.Hereby the need for additional converter stages in form of a Charge Buck regulator and a Discharge Buck regulator is eliminated.The bidirectional DC/DC converter can be used in connection with batteries, motors, etc, where the bidirectional feature, simple design and high performance may be useful.

  4. An Unusual Etiology for Bidirectional Ventricular Tachycardia.

    PubMed

    Zhao, Yun-Tao; Wang, Lei; Yi, Zhong

    2016-03-01

    Bidirectional ventricular tachycardia is a rare variety of tachycardia with a morphologically distinct presentation. The QRS axis and/or morphology alternate in the frontal plane leads. We report a patient with bidirectional ventricular tachycardia in association with aconitine poisoning.

  5. A Two-Stage Kalman Filter Approach for Robust and Real-Time Power System State Estimation

    SciTech Connect

    Zhang, Jinghe; Welch, Greg; Bishop, Gary; Huang, Zhenyu

    2014-04-01

    As electricity demand continues to grow and renewable energy increases its penetration in the power grid, realtime state estimation becomes essential for system monitoring and control. Recent development in phasor technology makes it possible with high-speed time-synchronized data provided by Phasor Measurement Units (PMU). In this paper we present a two-stage Kalman filter approach to estimate the static state of voltage magnitudes and phase angles, as well as the dynamic state of generator rotor angles and speeds. Kalman filters achieve optimal performance only when the system noise characteristics have known statistical properties (zero-mean, Gaussian, and spectrally white). However in practice the process and measurement noise models are usually difficult to obtain. Thus we have developed the Adaptive Kalman Filter with Inflatable Noise Variances (AKF with InNoVa), an algorithm that can efficiently identify and reduce the impact of incorrect system modeling and/or erroneous measurements. In stage one, we estimate the static state from raw PMU measurements using the AKF with InNoVa; then in stage two, the estimated static state is fed into an extended Kalman filter to estimate the dynamic state. Simulations demonstrate its robustness to sudden changes of system dynamics and erroneous measurements.

  6. Paradoxical and bidirectional drug effects.

    PubMed

    Smith, Silas W; Hauben, Manfred; Aronson, Jeffrey K

    2012-03-01

    A paradoxical drug reaction constitutes an outcome that is opposite from the outcome that would be expected from the drug's known actions. There are three types: 1. A paradoxical response in a condition for which the drug is being explicitly prescribed. 2. Paradoxical precipitation of a condition for which the drug is indicated, when the drug is being used for an alternative indication. 3. Effects that are paradoxical in relation to an aspect of the pharmacology of the drug but unrelated to the usual indication. In bidirectional drug reactions, a drug may produce opposite effects, either in the same or different individuals, the effects usually being different from the expected beneficial effect. Paradoxical and bidirectional drug effects can sometimes be harnessed for benefit; some may be adverse. Such reactions arise in a wide variety of drug classes. Some are common; others are reported in single case reports. Paradoxical effects are often adverse, since they are opposite the direction of the expected effect. They may complicate the assessment of adverse drug reactions, pharmacovigilance, and clinical management. Bidirectional effects may be clinically useful or adverse. From a clinical toxicological perspective, altered pharmacokinetics or pharmacodynamics in overdose may exacerbate paradoxical and bidirectional effects. Certain antidotes have paradoxical attributes, complicating management. Apparent clinical paradoxical or bidirectional effects and reactions ensue when conflicts arise at different levels in self-regulating biological systems, as complexity increases from subcellular components, such as receptors, to cells, tissues, organs, and the whole individual. These may be incompletely understood. Mechanisms of such effects include different actions at the same receptor, owing to changes with time and downstream effects; stereochemical effects; multiple receptor targets with or without associated temporal effects; antibody-mediated reactions; three

  7. Bidirectional power converter control electronics

    NASA Technical Reports Server (NTRS)

    Mildice, J. W.

    1987-01-01

    The object of this program was to design, build, test, and deliver a set of control electronics suitable for control of bidirectional resonant power processing equipment of the direct output type. The program is described, including the technical background, and results discussed. Even though the initial program tested only the logic outputs, the hardware was subsequently tested with high-power breadboard equipment, and in the testbed of NASA contract NAS3-24399. The completed equipment is now operating as part of the Space Station Power System Test Facility at NASA Lewis Research Center.

  8. Multi-vehicle detection with identity awareness using cascade Adaboost and Adaptive Kalman filter for driver assistant system.

    PubMed

    Wang, Baofeng; Qi, Zhiquan; Chen, Sizhong; Liu, Zhaodu; Ma, Guocheng

    2017-01-01

    Vision-based vehicle detection is an important issue for advanced driver assistance systems. In this paper, we presented an improved multi-vehicle detection and tracking method using cascade Adaboost and Adaptive Kalman filter(AKF) with target identity awareness. A cascade Adaboost classifier using Haar-like features was built for vehicle detection, followed by a more comprehensive verification process which could refine the vehicle hypothesis in terms of both location and dimension. In vehicle tracking, each vehicle was tracked with independent identity by an Adaptive Kalman filter in collaboration with a data association approach. The AKF adaptively adjusted the measurement and process noise covariance through on-line stochastic modelling to compensate the dynamics changes. The data association correctly assigned different detections with tracks using global nearest neighbour(GNN) algorithm while considering the local validation. During tracking, a temporal context based track management was proposed to decide whether to initiate, maintain or terminate the tracks of different objects, thus suppressing the sparse false alarms and compensating the temporary detection failures. Finally, the proposed method was tested on various challenging real roads, and the experimental results showed that the vehicle detection performance was greatly improved with higher accuracy and robustness.

  9. Multi-vehicle detection with identity awareness using cascade Adaboost and Adaptive Kalman filter for driver assistant system

    PubMed Central

    Wang, Baofeng; Qi, Zhiquan; Chen, Sizhong; Liu, Zhaodu; Ma, Guocheng

    2017-01-01

    Vision-based vehicle detection is an important issue for advanced driver assistance systems. In this paper, we presented an improved multi-vehicle detection and tracking method using cascade Adaboost and Adaptive Kalman filter(AKF) with target identity awareness. A cascade Adaboost classifier using Haar-like features was built for vehicle detection, followed by a more comprehensive verification process which could refine the vehicle hypothesis in terms of both location and dimension. In vehicle tracking, each vehicle was tracked with independent identity by an Adaptive Kalman filter in collaboration with a data association approach. The AKF adaptively adjusted the measurement and process noise covariance through on-line stochastic modelling to compensate the dynamics changes. The data association correctly assigned different detections with tracks using global nearest neighbour(GNN) algorithm while considering the local validation. During tracking, a temporal context based track management was proposed to decide whether to initiate, maintain or terminate the tracks of different objects, thus suppressing the sparse false alarms and compensating the temporary detection failures. Finally, the proposed method was tested on various challenging real roads, and the experimental results showed that the vehicle detection performance was greatly improved with higher accuracy and robustness. PMID:28296902

  10. Bi-directional four quadrant (BDQ4) power converter development

    NASA Technical Reports Server (NTRS)

    Schwarz, F. C.

    1979-01-01

    The feasibility for implementation of a concept for direct ac/dc multikilowatt power conversion with bidirectional transfer of energy was investigated. A 10 kHz current carrier was derived directly from a common 60 Hz three phase power system. This carrier was modulated to remove the 360 Hz ripple, inherent in the three phase power supply and then demodulated and processed by a high frequency filter. The resulting dc power was then supplied to a load. The process was implemented without the use of low frequency transformers and filters. This power conversion processes was reversible and can operate in the four quadrants as viewed from any of the two of the converter's ports. Areas of application include: power systems on air and spacecraft; terrestrial traction; integration of solar and wind powered systems with utility networks; HVDC; asynchronous coupling of polyphase networks; heat treatment; industrial machine drives; and power supplies for any use including instrumentation.

  11. Bidirectional MIMO Channel Tracking Based on PASTd and Performance Evaluation

    NASA Astrophysics Data System (ADS)

    Ehrenberg, Livnat; Gannot (Eurasipmember), Sharon; Shayevitz, Ofer; Leshem, Amir; Zehavi, Ephraim

    2010-12-01

    We consider a bidirectional time division duplex (TDD) multiple-input multiple-output (MIMO) communication system with time-varying channel and additive white Gaussian noise (AWGN). A blind bidirectional channel tracking algorithm, based on the projection approximation subspace tracking (PAST) algorithm, is applied in both terminals. The resulting singular value decomposition (SVD) of the channel matrix is then used to approximately diagonalize the channel. The proposed method is applied to an orthogonal frequency-division multiplexing-(OFDM-)MIMO setting with a typical indoor time-domain reflection model. The computational cost of the proposed algorithm, compared with other state-of-the-art algorithms, is relatively small. The Kalman filter is utilized for establishing a benchmark for the obtained performance of the proposed tracking algorithm. The performance degradation relative to a full channel state information (CSI) due to the application of the tracking algorithm is evaluated in terms of average effective rate and the outage probability and compared with alternative tracking algorithms. The obtained results are also compared with a benchmark obtained by the Kalman filter with known input signal and channel characteristics. It is shown that the expected degradation in performance of frequency-domain algorithms (which do not exploit the smooth frequency response of the channel) is only minor compared with time-domain algorithms in a range of reasonable signal-to-noise ratio (SNR) levels. The proposed bidirectional frequency-domain tracking algorithm, proposed in this paper, is shown to attain communication rates close to the benchmark and to outperform a competing algorithm. The paper is concluded by evaluating the proposed blind tracking method in terms of the outage probability and the symbol error rate (SER) versus. SNR for binary phase shift keying (BPSK) and 4-Quadrature amplitude modulation (QAM) constellations.

  12. Fail-safe bidirectional valve driver

    NASA Technical Reports Server (NTRS)

    Fujimoto, H.

    1974-01-01

    Cross-coupled diodes are added to commonly used bidirectional valve driver circuit to protect circuit and power supply. Circuit may be used in systems requiring fail-safe bidirectional valve operation, particularly in chemical- and petroleum-processing control systems and computer-controlled hydraulic or pneumatic systems.

  13. Bidirectional chaos communication between two outer semiconductor lasers coupled mutually with a central semiconductor laser.

    PubMed

    Li, Ping; Wu, Jia-Gui; Wu, Zheng-Mao; Lin, Xiao-Dong; Deng, Dao; Liu, Yu-Ran; Xia, Guang-Qiong

    2011-11-21

    Based on a linear chain composed of a central semiconductor laser and two outer semiconductor lasers, chaos synchronization and bidirectional communication between two outer lasers have been investigated under the case that the central laser and the two outer lasers are coupled mutually, whereas there exists no coupling between the two outer lasers. The simulation results show that high-quality and stable isochronal synchronization between the two outer lasers can be achieved, while the cross-correlation coefficients between the two outer lasers and the central laser are very low under proper operation condition. Based on the high performance chaos synchronization between the two outer lasers, message bidirectional transmissions of bit rates up to 20 Gbit/s can be realized through adopting a novel decoding scheme which is different from that based on chaos pass filtering effect. Furthermore, the security of bidirectional communication is also analyzed.

  14. Bidirectional waveguide coupling with plasmonic Fano nanoantennas

    SciTech Connect

    Guo, Rui; Decker, Manuel Staude, Isabelle; Neshev, Dragomir N.; Kivshar, Yuri S.

    2014-08-04

    We introduce the concept of a bidirectional, compact single-element Fano nanoantenna that allows for directional coupling of light in opposite directions of a high-index dielectric waveguide for two different operation wavelengths. We utilize a Fano resonance to tailor the radiation phases of a gold nanodisk and a nanoslit that is inscribed into the nanodisk to realize bidirectional scattering. We show that this Fano nanoantenna operates as a bidirectional waveguide coupler at telecommunication wavelengths and, thus, is ideally suitable for integrated wavelength-selective light demultiplexing.

  15. Bi-directional electrothermal electromagnetic actuators

    NASA Astrophysics Data System (ADS)

    Cao, Andrew; Kim, Jongbaeg; Lin, Liwei

    2007-05-01

    A new breed of in-plane bi-directional MEMS actuators based on controlled electrothermal buckling and electromagnetic Lorentz force has been demonstrated under both dc and ac operations. Experimentally, bi-directional actuators made by the standard surface-micromachining process have a lateral actuation range of several microns and can exert forces over 100 µN, while those made by SOI and MetalMUMPs processes have an operation range up to several tens of microns and can exert more than 20 mN of force. Reliability tests show that SOI/MetalMUMPs and surface-micromachined actuators can operate for more than 1 and 100 million cycles, respectively, with no signs of degradation. As such, these micro-actuators could be used for MEMS devices that require a bi-directional movement with a large force output such as bi-directional micro-relays.

  16. Study of bidirectional broadband passive optical network (BPON) using EDFA

    NASA Astrophysics Data System (ADS)

    Almalaq, Yasser

    Optical line terminals (OLTs) and number of optical network units (ONUs) are two main parts of passive optical network (PON). OLT is placed at the central office of the service providers, the ONUs are located near to the end subscribers. When compared with point-to-point design, a PON decreases the number of fiber used and central office components required. Broadband PON (BPON), which is one type of PON, can support high-speed voice, data and video services to subscribers' residential homes and small businesses. In this research, by using erbium doped fiber amplifier (EDFA), the performance of bi-directional BPON is experimented and tested for both downstream and upstream traffic directions. Ethernet PON (E-PON) and gigabit PON (G-PON) are the two other kinds of passive optical network besides BPON. The most beneficial factor of using BPON is it's reduced cost. The cost of the maintenance between the central office and the users' side is suitable because of the use of passive components, such as a splitter in the BPON architecture. In this work, a bidirectional BPON has been analyzed for both downstream and upstream cases by using bit error rate analyzer (BER). BER analyzers test three factors that are the maximum Q factor, minimum bit error rate, and eye height. In other words, parameters such as maximum Q factor, minimum bit error rate, and eye height can be analyzed utilized a BER tester. Passive optical components such as a splitter, optical circulator, and filters have been used in modeling and simulations. A 12th edition Optiwave simulator has been used in order to analyze the bidirectional BPON system. The system has been tested under several conditions such as changing the fiber length, extinction ratio, dispersion, and coding technique. When a long optical fiber above 40km was used, an EDFA was used in order to improve the quality of the signal.

  17. Bi-directional triplexer with butterfly MMI coupler using SU-8 polymer waveguides

    NASA Astrophysics Data System (ADS)

    Mareš, David; Jeřábek, Vítězslav; Prajzler, Václav

    2015-01-01

    We report about a design of a bi-directional planar optical multiplex/demultiplex filter (triplexer) for the optical part of planar hybrid WDM bi-directional transceiver in fiber-to-the-home (FTTH) PON applications. The triplex lightwave circuit is based on the Epoxy Novolak Resin SU-8 waveguides on the silica-on-silicon substrate with Polymethylmethacrylate cladding layer. The triplexer is comprised of a linear butterfly concept of multimode interference (MMI) coupler separating downstream optical signals of 1490 nm and 1550 nm. For the upstream channel of 1310 nm, an additional directional coupler (DC) is used to add optical signal of 1310 nm propagating in opposite direction. The optical triplexer was designed and optimized using beam propagation method. The insertion losses, crosstalk attenuation, and extinction ratio for all three inputs/outputs were investigated. The intended triplexer was designed using the parameters of the separated DC and MMI filter to approximate the idealized direct connection of both devices.

  18. Bidirectional Modulation of Numerical Magnitude.

    PubMed

    Arshad, Qadeer; Nigmatullina, Yuliya; Nigmatullin, Ramil; Asavarut, Paladd; Goga, Usman; Khan, Sarah; Sander, Kaija; Siddiqui, Shuaib; Roberts, R E; Cohen Kadosh, Roi; Bronstein, Adolfo M; Malhotra, Paresh A

    2016-05-01

    Numerical cognition is critical for modern life; however, the precise neural mechanisms underpinning numerical magnitude allocation in humans remain obscure. Based upon previous reports demonstrating the close behavioral and neuro-anatomical relationship between number allocation and spatial attention, we hypothesized that these systems would be subject to similar control mechanisms, namely dynamic interhemispheric competition. We employed a physiological paradigm, combining visual and vestibular stimulation, to induce interhemispheric conflict and subsequent unihemispheric inhibition, as confirmed by transcranial direct current stimulation (tDCS). This allowed us to demonstrate the first systematic bidirectional modulation of numerical magnitude toward either higher or lower numbers, independently of either eye movements or spatial attention mediated biases. We incorporated both our findings and those from the most widely accepted theoretical framework for numerical cognition to present a novel unifying computational model that describes how numerical magnitude allocation is subject to dynamic interhemispheric competition. That is, numerical allocation is continually updated in a contextual manner based upon relative magnitude, with the right hemisphere responsible for smaller magnitudes and the left hemisphere for larger magnitudes.

  19. Simultaneous density contrast is bidirectional.

    PubMed

    Sun, Hua-Chun; Baker, Curtis L; Kingdom, Frederick A A

    2016-11-01

    Simultaneous density contrast, or SDC, is the phenomenon in which the perceived density of a textured region is altered by a surround of different density (Mackay, 1973). SDC provides an experimental tool to investigate mechanisms of density coding, yet has not been systematically examined. We measured SDC with a 2AFC staircase procedure in which human observers judged which of two patterns, one with and one without a surround, appeared more dense. We used a range of surround densities varying from very sparse to very dense (0-76.8 dots/deg2), and two center test densities (6.4 and 12.8 dots/deg2). Psychometric functions were used to estimate both the points of subjective equality (PSE) and their precision. Unexpectedly we find a bidirectional SDC effect across the five observers: Not only does a denser surround reduce perceived density of the center, but a sparser surround enhances its perceived density. We also show that SDC is not mediated by either contrast-contrast or spatial-frequency contrast. Our results suggest the presence of multiple channels selective for texture density, with lateral inhibitory interactions between them.

  20. Bidirectional Modulation of Numerical Magnitude

    PubMed Central

    Arshad, Qadeer; Nigmatullina, Yuliya; Nigmatullin, Ramil; Asavarut, Paladd; Goga, Usman; Khan, Sarah; Sander, Kaija; Siddiqui, Shuaib; Roberts, R. E.; Cohen Kadosh, Roi; Bronstein, Adolfo M.; Malhotra, Paresh A.

    2016-01-01

    Numerical cognition is critical for modern life; however, the precise neural mechanisms underpinning numerical magnitude allocation in humans remain obscure. Based upon previous reports demonstrating the close behavioral and neuro-anatomical relationship between number allocation and spatial attention, we hypothesized that these systems would be subject to similar control mechanisms, namely dynamic interhemispheric competition. We employed a physiological paradigm, combining visual and vestibular stimulation, to induce interhemispheric conflict and subsequent unihemispheric inhibition, as confirmed by transcranial direct current stimulation (tDCS). This allowed us to demonstrate the first systematic bidirectional modulation of numerical magnitude toward either higher or lower numbers, independently of either eye movements or spatial attention mediated biases. We incorporated both our findings and those from the most widely accepted theoretical framework for numerical cognition to present a novel unifying computational model that describes how numerical magnitude allocation is subject to dynamic interhemispheric competition. That is, numerical allocation is continually updated in a contextual manner based upon relative magnitude, with the right hemisphere responsible for smaller magnitudes and the left hemisphere for larger magnitudes. PMID:26879093

  1. A Bidirectional Optical Module Based on Stacked Planar Optical Circuit

    NASA Astrophysics Data System (ADS)

    Mizuno, Rogerio Jun; Aoki, Yasuhiko; Shimada, Yuji; Iga, Kenichi

    2000-03-01

    In this paper, a bidirectional optical module based on a stacked planar optical circuit (SPOC) concept to perform a wavelength division multiplexing (WDM) function is described. The module consists of an optical chip which incorporates planar microlens (PML) arrays and nonpolarizing 1.31/1.55 μm WDM dielectric-multilayer filters. Module design and theoretical estimation of loss tolerance were conducted. From preliminary experiments, the feasibility of SPOC modules was confirmed. A fabricated WDM filter showed a small polarization-dependent loss (PDL) of about 0.48 dB and 0.05 dB for the wavelengths of 1.31 μm and 1.55 μm, respectively. Channel crosstalk and PDL for the SPOC module were characterized by means of discrete filter devices. For the 1.55 μm downstream (1.31 μm downstream/upstream) channel, a crosstalk as low as {-}40 dB ({-}26 dB) and a PDL less than 0.23 dB (0.53 dB) were achieved.

  2. Bidirectional Modulation of Recognition Memory.

    PubMed

    Ho, Jonathan W; Poeta, Devon L; Jacobson, Tara K; Zolnik, Timothy A; Neske, Garrett T; Connors, Barry W; Burwell, Rebecca D

    2015-09-30

    Perirhinal cortex (PER) has a well established role in the familiarity-based recognition of individual items and objects. For example, animals and humans with perirhinal damage are unable to distinguish familiar from novel objects in recognition memory tasks. In the normal brain, perirhinal neurons respond to novelty and familiarity by increasing or decreasing firing rates. Recent work also implicates oscillatory activity in the low-beta and low-gamma frequency bands in sensory detection, perception, and recognition. Using optogenetic methods in a spontaneous object exploration (SOR) task, we altered recognition memory performance in rats. In the SOR task, normal rats preferentially explore novel images over familiar ones. We modulated exploratory behavior in this task by optically stimulating channelrhodopsin-expressing perirhinal neurons at various frequencies while rats looked at novel or familiar 2D images. Stimulation at 30-40 Hz during looking caused rats to treat a familiar image as if it were novel by increasing time looking at the image. Stimulation at 30-40 Hz was not effective in increasing exploration of novel images. Stimulation at 10-15 Hz caused animals to treat a novel image as familiar by decreasing time looking at the image, but did not affect looking times for images that were already familiar. We conclude that optical stimulation of PER at different frequencies can alter visual recognition memory bidirectionally. Significance statement: Recognition of novelty and familiarity are important for learning, memory, and decision making. Perirhinal cortex (PER) has a well established role in the familiarity-based recognition of individual items and objects, but how novelty and familiarity are encoded and transmitted in the brain is not known. Perirhinal neurons respond to novelty and familiarity by changing firing rates, but recent work suggests that brain oscillations may also be important for recognition. In this study, we showed that stimulation of

  3. Block-classified bidirectional motion compensation scheme for wavelet-decomposed digital video

    SciTech Connect

    Zafar, S.; Zhang, Y.Q.; Jabbari, B.

    1997-08-01

    In this paper the authors introduce a block-classified bidirectional motion compensation scheme for the previously developed wavelet-based video codec, where multiresolution motion estimation is performed in the wavelet domain. The frame classification structure described in this paper is similar to that used in the MPEG standard. Specifically, the I-frames are intraframe coded, the P-frames are interpolated from a previous I- or a P-frame, and the B-frames are bidirectional interpolated frames. They apply this frame classification structure to the wavelet domain with variable block sizes and multiresolution representation. They use a symmetric bidirectional scheme for the B-frames and classify the motion blocks as intraframe, compensated either from the preceding or the following frame, or bidirectional (i.e., compensated based on which type yields the minimum energy). They also introduce the concept of F-frames, which are analogous to P-frames but are predicted from the following frame only. This improves the overall quality of the reconstruction in a group of pictures (GOP) but at the expense of extra buffering. They also study the effect of quantization of the I-frames on the reconstruction of a GOP, and they provide intuitive explanation for the results. In addition, the authors study a variety of wavelet filter-banks to be used in a multiresolution motion-compensated hierarchical video codec.

  4. A bidirectional shape memory alloy folding actuator

    NASA Astrophysics Data System (ADS)

    Paik, Jamie K.; Wood, Robert J.

    2012-06-01

    This paper presents a low-profile bidirectional folding actuator based on annealed shape memory alloy sheets applicable for meso- and microscale systems. Despite the advantages of shape memory alloys—high strain, silent operation, and mechanical simplicity—their application is often limited to unidirectional operation. We present a bidirectional folding actuator that produces two opposing 180° motions. A laser-patterned nickel alloy (Inconel 600) heater localizes actuation to the folding sections. The actuator has a thin ( < 1 mm) profile, making it appropriate for use in robotic origami. Various design parameters and fabrication variants are described and experimentally explored in the actuator prototype.

  5. Bidirectional ventricular tachycardia of unusual etiology

    PubMed Central

    Chakraborty, Praloy; Kaul, Bhavna; Mandal, Kausik; Isser, H.S.; Bansal, Sandeep; Subramanian, Anandaraja

    2016-01-01

    Bidirectional ventricular tachycardia (BDVT) is a rare form of ventricular arrhythmia, characterized by changing QRS axis of 180 degrees. Digitalis toxicity is considered as commonest cause of BDVT; other causes include aconite toxicity, myocarditis, myocardial infarction, metastatic cardiac tumour and cardiac channelopathies. We describe a case of BDVT in a patient with Anderson-Tawil syndrome. PMID:27479206

  6. A Wavelength Multiplexed Bidirectional Fiber Ring Network

    DTIC Science & Technology

    2007-11-02

    commercially available from many vendors. Depending on their application, they can be rather complex or quite simple in their functionality . A simple ADM...FBG implementation of circulators, it allows for bidirectional signal ths. The BADM in Figure 10 functions as multiplexer is also used in Figure 10...signature) _________________________ (date) Captain Robert Voigt , United States Navy Electrical Engineering Department Chair

  7. Bidirectional direct modulation CATV and phase remodulation radio-over-fiber transport systems.

    PubMed

    Tsai, Wen-Shing; Ma, Hsien-Li; Lu, Hai-Han; Lin, Ying-Pyng; Chen, Hung-Yi; Yan, Shr-Chi

    2010-12-06

    A bidirectional lightwave transport system employing direct modulation CATV and phase remodulation radio-over-fiber (ROF) signals in two-way transmission is proposed and experimentally demonstrated. To be the first system of reusing the phase of the transmitting lightwave with multi-carrier analog CATV signal, the transmission performances of CATV and ROF signals are investigated in bidirectional way, with the help of optical band-pass filters (OBPFs) at the receiving sites. Through a serious investigation, the transmitting light sources are successfully remodulated with RF signals for transmission. Brilliant transmission performances of composite second-order (CSO), composite triple-beat (CTB), and bit error rate (BER) were obtained; accompanied with acceptable carrier-to-noise ratio (CNR) value. This proposed system reveals a prominent one with economy and convenience to be installed.

  8. Isolation and Functional Characterization of Bidirectional Promoters in Rice

    PubMed Central

    Wang, Rui; Yan, Yan; Zhu, Menglin; Yang, Mei; Zhou, Fei; Chen, Hao; Lin, Yongjun

    2016-01-01

    Bidirectional promoters, which show great application potential in genetic improvement of plants, have aroused great research interest recently. However, most bidirectional promoters were cloned individually in the studies of single genes. Here, we initiatively combined RNA-seq data and cDNA microarray data to discover the potential bidirectional promoters in rice genome. Based on the expression level and correlation of each adjacent and oppositely transcribed gene pair, we selected four candidate gene pairs. Then, the intergenic region between each pair was isolated and cloned into a dual reporter vector pDX2181 for functional identification. GUS and GFP assays of the transgenic plants indicated that all the intergenic regions showed bidirectional expression activity in various tissues. Through 5′ and 3′ deletion analysis on one of the above bidirectional promoters, we identified the enhancing region which sharply increased its bidirectional expression efficiency and the essential regions respectively responsible for its 5′ and 3′ basic expression activity. The bidirectional arrangement of the four gene pairs in six gramineous plants was also analyzed, showing the conserved characteristics of the four bidirectional promoters identified in our study. In addition, two novel cis-sequences conserved in the four bidirectional promoters were discovered by bioinformatic identification. Our study proposes a feasible method for selecting, cloning, and functionally identifying bidirectional promoters as well as for discovering their bidirectional regulatory regions and conserved sequences in rice. PMID:27303432

  9. Disk filter

    DOEpatents

    Bergman, Werner

    1986-01-01

    An electric disk filter provides a high efficiency at high temperature. A hollow outer filter of fibrous stainless steel forms the ground electrode. A refractory filter material is placed between the outer electrode and the inner electrically isolated high voltage electrode. Air flows through the outer filter surfaces through the electrified refractory filter media and between the high voltage electrodes and is removed from a space in the high voltage electrode.

  10. Disk filter

    DOEpatents

    Bergman, W.

    1985-01-09

    An electric disk filter provides a high efficiency at high temperature. A hollow outer filter of fibrous stainless steel forms the ground electrode. A refractory filter material is placed between the outer electrode and the inner electrically isolated high voltage electrode. Air flows through the outer filter surfaces through the electrified refractory filter media and between the high voltage electrodes and is removed from a space in the high voltage electrode.

  11. The Dual Lives of Bidirectional Promoters

    PubMed Central

    Wakano, Clay; Byun, Jung S.; Di, Li-Jun; Gardner, Kevin

    2012-01-01

    The sequencing of the human genome led to many insights into gene organization and structure. One interesting observation was the high frequency of bidirectional promoters characterized by two protein encoding genes whose promoters are arranged in a divergent or “head-to-head” configuration with less than 2000 base pairs of intervening sequence. Computational estimates published by various groups indicate that nearly 10% of the coding gene promoters are arranged in such a manner and the extent of this bias is a unique feature of mammalian genomes. Moreover, as a class, head-to-head promoters appear to be enriched in specific categories of gene function. Here we review the structure, composition, genomic properties and functional classifications of genes controlled by bidirectional promoters and explore the biological implication of these features. PMID:22366276

  12. Robust bidirectional links for photonic quantum networks

    PubMed Central

    Xu, Jin-Shi; Yung, Man-Hong; Xu, Xiao-Ye; Tang, Jian-Shun; Li, Chuan-Feng; Guo, Guang-Can

    2016-01-01

    Optical fibers are widely used as one of the main tools for transmitting not only classical but also quantum information. We propose and report an experimental realization of a promising method for creating robust bidirectional quantum communication links through paired optical polarization-maintaining fibers. Many limitations of existing protocols can be avoided with the proposed method. In particular, the path and polarization degrees of freedom are combined to deterministically create a photonic decoherence-free subspace without the need for any ancillary photon. This method is input state–independent, robust against dephasing noise, postselection-free, and applicable bidirectionally. To rigorously quantify the amount of quantum information transferred, the optical fibers are analyzed with the tools developed in quantum communication theory. These results not only suggest a practical means for protecting quantum information sent through optical quantum networks but also potentially provide a new physical platform for enriching the structure of the quantum communication theory. PMID:26824069

  13. Robust bidirectional links for photonic quantum networks.

    PubMed

    Xu, Jin-Shi; Yung, Man-Hong; Xu, Xiao-Ye; Tang, Jian-Shun; Li, Chuan-Feng; Guo, Guang-Can

    2016-01-01

    Optical fibers are widely used as one of the main tools for transmitting not only classical but also quantum information. We propose and report an experimental realization of a promising method for creating robust bidirectional quantum communication links through paired optical polarization-maintaining fibers. Many limitations of existing protocols can be avoided with the proposed method. In particular, the path and polarization degrees of freedom are combined to deterministically create a photonic decoherence-free subspace without the need for any ancillary photon. This method is input state-independent, robust against dephasing noise, postselection-free, and applicable bidirectionally. To rigorously quantify the amount of quantum information transferred, the optical fibers are analyzed with the tools developed in quantum communication theory. These results not only suggest a practical means for protecting quantum information sent through optical quantum networks but also potentially provide a new physical platform for enriching the structure of the quantum communication theory.

  14. Systems and methods for bi-directional energy delivery with galvanic isolation

    SciTech Connect

    Kajouke, Lateef A.

    2013-06-18

    Systems and methods are provided for bi-directional energy delivery. A charging system comprises a first bi-directional conversion module, a second bi-directional conversion module, and an isolation module coupled between the first bi-directional conversion module and the second bi-directional conversion module. The isolation module provides galvanic isolation between the first bi-directional conversion module and the second bi-directional conversion module.

  15. The Bidirectional Reflectance of Apollo Lunar Soils

    NASA Astrophysics Data System (ADS)

    Foote, E.; Paige, D.; Shepard, M.; Johnson, J.; Grundy, W.; Biggar, S.; Greenhagen, B.; Allen, C.

    2011-10-01

    We have compared laboratory solar bidirectional reflectance measurements of a diverse set of Apollo soil samples with Lunar Reconnaissance Orbiter (LRO) Diviner orbital albedo measurements at the Apollo 11 and 16 landing sites. Preliminary results show good agreement between the laboratory and orbital measurements at low phase angles. We expect reasonable agreement between the Apollo 12, 15, and 17 landing sites once we complete those measurements.

  16. Submicron bidirectional all-optical plasmonic switches

    PubMed Central

    Chen, Jianjun; Li, Zhi; Zhang, Xiang; Xiao, Jinghua; Gong, Qihuang

    2013-01-01

    Ultra-small all-optical switches are of importance in highly integrated optical communication and computing networks. However, the weak nonlinear light-matter interactions in natural materials present an enormous challenge to realize efficiently switching for the ultra-short interaction lengths. Here, we experimentally demonstrate a submicron bidirectional all-optical plasmonic switch with an asymmetric T-shape single slit. Sharp asymmetric spectra as well as significant field enhancements (about 18 times that in the conventional slit case) occur in the symmetry-breaking structure. Consequently, both of the surface plasmon polaritons propagating in the opposite directions on the metal surface are all-optically controlled inversely at the same time with the on/off switching ratios of >6 dB for the device lateral dimension of <1 μm. Moreover, in such a submicron structure, the coupling of free-space light and the on-chip bidirectional switching are integrated together. This submicron bidirectional all-optical switch may find important applications in the highly integrated plasmonic circuits. PMID:23486232

  17. Bidirectional sex change in mushroom stony corals

    PubMed Central

    Loya, Yossi; Sakai, Kazuhiko

    2008-01-01

    Sex change occurs when an individual changes from one functional sex to another. The direction of sex change occurs mainly from male to female (protandry) or vice versa (protogyny), but sometimes may be bidirectional (repetitive). Here, for the first time in stony corals, we report on a protandrous sex change exhibited by two mushroom corals, Fungia repanda and Ctenactis echinata, with the latter also exhibiting bidirectional sex change. Compared with C. echinata, F. repanda exhibited relatively earlier sex change, significantly slower growth and higher mortality rates, in accordance with sex-allocation theory. Sex ratio in both the species was biased towards the first sex. The bidirectional sex change displayed by C. echinata greatly resembles that of dioecious plants that display labile sexuality in response to energetic and/or environmental constraints. We posit that, similar to these plants, in the studied corals, sex change increases their overall fitness, reinforcing the important role of reproductive plasticity in scleractinian corals in determining their evolutionary success. PMID:18611848

  18. Water Filters

    NASA Technical Reports Server (NTRS)

    1993-01-01

    The Aquaspace H2OME Guardian Water Filter, available through Western Water International, Inc., reduces lead in water supplies. The filter is mounted on the faucet and the filter cartridge is placed in the "dead space" between sink and wall. This filter is one of several new filtration devices using the Aquaspace compound filter media, which combines company developed and NASA technology. Aquaspace filters are used in industrial, commercial, residential, and recreational environments as well as by developing nations where water is highly contaminated.

  19. Bidirectional phase-modulated hybrid cable television/radio-over-fiber lightwave transport systems.

    PubMed

    Chen, Chia-Yi; Wu, Po-Yi; Lu, Hai-Han; Lin, Ying-Pyng; Gao, Ming-Cian; Wen, Jian-Ying; Chen, Hwan-Wen

    2013-02-15

    A bidirectional phase-modulated hybrid cable television/radio-over-fiber lightwave transport system employing fiber Bragg grating tilt filter as a phase modulation-to-intensity modulation conversion scheme is proposed and demonstrated. Impressive performances of carrier-to-noise ratio, composite second-order, composite triple-beat, and bit-error rate are obtained in our proposed systems over a combination of 40 km single-mode fiber-and 1.43 km photonic crystal fiber transmission.

  20. Biological Filters.

    ERIC Educational Resources Information Center

    Klemetson, S. L.

    1978-01-01

    Presents the 1978 literature review of wastewater treatment. The review is concerned with biological filters, and it covers: (1) trickling filters; (2) rotating biological contractors; and (3) miscellaneous reactors. A list of 14 references is also presented. (HM)

  1. Metallic Filters

    NASA Technical Reports Server (NTRS)

    1985-01-01

    Filtration technology originated in a mid 1960's NASA study. The results were distributed to the filter industry, an HR Textron responded, using the study as a departure for the development of 421 Filter Media. The HR system is composed of ultrafine steel fibers metallurgically bonded and compressed so that the pore structure is locked in place. The filters are used to filter polyesters, plastics, to remove hydrocarbon streams, etc. Several major companies use the product in chemical applications, pollution control, etc.

  2. Filter validation.

    PubMed

    Madsen, Russell E

    2006-01-01

    Validation of a sterilizing filtration process is critical since it is impossible with currently available technology to measure the sterility of each filled container; therefore, sterility assurance of the filtered product must be achieved through validation of the filtration process. Validating a pharmaceutical sterile filtration process involves three things: determining the effect of the liquid on the filter, determining the effect of the filter on the liquid, and demonstrating that the filter removes all microorganisms from the liquid under actual processing conditions.

  3. FILTER TREATMENT

    DOEpatents

    Sutton, J.B.; Torrey, J.V.P.

    1958-08-26

    A process is described for reconditioning fused alumina filters which have become clogged by the accretion of bismuth phosphate in the filter pores, The method consists in contacting such filters with faming sulfuric acid, and maintaining such contact for a substantial period of time.

  4. Water Filters

    NASA Technical Reports Server (NTRS)

    1987-01-01

    A compact, lightweight electrolytic water filter generates silver ions in concentrations of 50 to 100 parts per billion in the water flow system. Silver ions serve as effective bactericide/deodorizers. Ray Ward requested and received from NASA a technical information package on the Shuttle filter, and used it as basis for his own initial development, a home use filter.

  5. Low-Cost WDM-PON With Colorless Bidirectional Transceivers

    NASA Astrophysics Data System (ADS)

    Shin, Dong Jae; Keh, Y. C.; Kwon, J. W.; Lee, E. H.; Lee, J. K.; Park, M. K.; Park, J. W.; Oh, Y. K.; Kim, S. W.; Yun, I. K.; Shin, H. C.; Heo, D.; Lee, J. S.; Shin, H. S.; Kim, H. S.; Park, S. B.; Jung, D. K.; Hwang, Seongtaek; Oh, Y. J.; Jang, D. H.; Shim, C. S.

    2006-01-01

    This paper presents a low-cost bidirectional (BiDi) wavelength-division-multiplexed passive optical network (WDM-PON) employing colorless uncooled BiDi transceivers (TRxs) and superluminescent diode (SLD)-based broadband light sources (BLSs). The C band is allocated for upstream and the E+ band for downstream in consideration of BiDi packaging, SLD development, and wavelength alignment of dual-window arrayed waveguide gratings (AWGs). The BiDi TRx integrates an uncooled Fabry-Pérot laser diode (FP-LD), a p-i-n photodiode (PD), and a 45°-angled thin-film filter in a small-form-factor (SFF) package. The SLD-based BLSs provide 13-dBm amplified spontaneous emissions (ASEs) with spectral ripples of < 3 dB and polarization dependencies of < 1 dB. Colorless operations over 32 100-GHz-spaced channels are demonstrated from -20 to 80°C in 155-Mb/s BiDi transmissions over 25 km.

  6. Variational filtering.

    PubMed

    Friston, K J

    2008-07-01

    This note presents a simple Bayesian filtering scheme, using variational calculus, for inference on the hidden states of dynamic systems. Variational filtering is a stochastic scheme that propagates particles over a changing variational energy landscape, such that their sample density approximates the conditional density of hidden and states and inputs. The key innovation, on which variational filtering rests, is a formulation in generalised coordinates of motion. This renders the scheme much simpler and more versatile than existing approaches, such as those based on particle filtering. We demonstrate variational filtering using simulated and real data from hemodynamic systems studied in neuroimaging and provide comparative evaluations using particle filtering and the fixed-form homologue of variational filtering, namely dynamic expectation maximisation.

  7. Bidirectional scattering of light from tree leaves

    NASA Technical Reports Server (NTRS)

    Brakke, Thomas W.; Smith, James A.; Harnden, Joann M.

    1989-01-01

    A laboratory goniometer consisting of an He-Ne laser (632.8 nm), vertical leaf holder, and silicon photovoltaic detector was used to measure the bidirectional scattering (both transmittance and reflectance) of red oak and red maple. The illumination angles were 0, 30, and 60 deg, and the scattering was recorded approximately every 10 deg in the principal plane. The scattering profiles obtained show the non-Lambertian characteristics of the scattering, particularly for the off-nadir illumination directions. The transmitted light was more isotropic than the reflected light.

  8. Bidirectional Drive-And-Brake Mechanism

    NASA Technical Reports Server (NTRS)

    Swan, Scott A.

    1991-01-01

    Vehicle that crawls along monorail combines features of both bicycle and railroad handcar. Bidirectional drive-and-brake mechanism includes selectable-pawl-and-ratchet overrunning clutch (drive mechanism) and mating stationary and rotating conical surfaces pressing against each other (brake mechanism). Operates similarly to bicycle drive-and-brake mechanism except limits rotation of sprocket in both directions and brakes at both limits. Conceived for use by astronaut traveling along structure in outer space, concept also applied on Earth to make very small railraod handcars or crawling vehicles for use on large structures, in pipelines under construction, or underwater.

  9. Prediction and measurement of soil bidirectional reflectance

    NASA Technical Reports Server (NTRS)

    Irons, James R.; Campbell, Gaylon S.; Norman, John M.; Graham, David W.; Kovalick, William M.

    1992-01-01

    The present model for soil bidirectional reflectance distribution functions in the visible and reflective IR ranges is based on a representation of soil surfaces by a collection of opaque spheres atop a Lambertian horizontal surface. The model is not sensitive to increases in the sphere area index beyond a value of 0.4. Observed soil reflectance factor data for a tilled field are noted to be consistent with those predicted by the model's expression of soil reflectance as a function of the horizontal area obscured by a sphere, the amount of surface in shadow, and relative brightness of a sphere, and the fraction of diffuse illumination.

  10. TOOL ASSEMBLY WITH BI-DIRECTIONAL BEARING

    DOEpatents

    Longhurst, G.E.

    1961-07-11

    A two-direction motion bearing which is incorporated in a refueling nuclear fuel element trsnsfer tool assembly is described. A plurality of bi- directional bearing assembliesare fixed equi-distantly about the circumference of the transfer tool assembly to provide the tool assembly with a bearing surface- for both axial and rotational motion. Each bi-directional bearing assembly contains a plurality of circumferentially bulged rollers mounted in a unique arrangement which will provide a bearing surface for rotational movement of the tool assembly within a bore. The bi-direc tional bearing assembly itself is capable of rational motion and thus provides for longitudinal movement of the tool assembly.

  11. Bi-directional planar slide mechanism

    DOEpatents

    Bieg, Lothar F.

    2003-11-04

    A bi-directional slide mechanism. A pair of master and slave disks engages opposite sides of the platform. Rotational drivers are connected to master disks so the disks rotate eccentrically about their respective axes of rotation. Opposing slave disks are connected to master disks on opposite sides of the platform by a circuitous mechanical linkage, or are electronically synchronized together using stepper motors, to effect coordinated motion. The synchronized eccentric motion of the pairs of master/slave disks compels smooth linear motion of the platform forwards and backwards without backlash. The apparatus can be incorporated in a MEMS device.

  12. Preservation of quadrature Doppler signals from bidirectional slow blood flow close to the vessel wall using an adaptive decomposition algorithm.

    PubMed

    Zhang, Yufeng; Shi, Xinling; Zhang, Kexin; Chen, Jianhua

    2009-03-01

    A novel approach based on the phasing-filter (PF) technique and the empirical mode decomposition (EMD) algorithm is proposed to preserve quadrature Doppler signal components from bidirectional slow blood flow close to the vessel wall. Bidirectional mixed Doppler ultrasound signals, which were echoed from the forward and reverse moving blood and vessel wall, were initially separated to avoid the phase distortion of quadrature Doppler signals (which is induced from direct decomposition by the nonlinear EMD processing). Separated unidirectional mixed Doppler signals were decomposed into intrinsic mode functions (IMFs) using the EMD algorithm and the relevant IMFs that contribute to blood flow components were identified and summed to give the blood flow signals, whereby only the components from the bidirectional slow blood flow close to the vessel wall were retained independently. The complex quadrature Doppler blood flow signal was reconstructed from a combination of the extracted unidirectional Doppler blood flow signals. The proposed approach was applied to simulated and clinical Doppler signals. It is concluded from the experimental results that this approach is practical for the preservation of quadrature Doppler signal components from the bidirectional slow blood flow close to the vessel wall, and may provide more diagnostic information for the diagnosis and treatment of vascular diseases.

  13. Personalized recommendation based on heat bidirectional transfer

    NASA Astrophysics Data System (ADS)

    Ma, Wenping; Feng, Xiang; Wang, Shanfeng; Gong, Maoguo

    2016-02-01

    Personalized recommendation has become an increasing popular research topic, which aims to find future likes and interests based on users' past preferences. Traditional recommendation algorithms pay more attention to forecast accuracy by calculating first-order relevance, while ignore the importance of diversity and novelty that provide comfortable experiences for customers. There are some levels of contradictions between these three metrics, so an algorithm based on bidirectional transfer is proposed in this paper to solve this dilemma. In this paper, we agree that an object that is associated with history records or has been purchased by similar users should be introduced to the specified user and recommendation approach based on heat bidirectional transfer is proposed. Compared with the state-of-the-art approaches based on bipartite network, experiments on two benchmark data sets, Movielens and Netflix, demonstrate that our algorithm has better performance on accuracy, diversity and novelty. Moreover, this method does better in exploiting long-tail commodities and cold-start problem.

  14. Controlled Bidirectional Quantum Secure Direct Communication

    PubMed Central

    Chou, Yao-Hsin; Lin, Yu-Ting; Zeng, Guo-Jyun; Lin, Fang-Jhu; Chen, Chi-Yuan

    2014-01-01

    We propose a novel protocol for controlled bidirectional quantum secure communication based on a nonlocal swap gate scheme. Our proposed protocol would be applied to a system in which a controller (supervisor/Charlie) controls the bidirectional communication with quantum information or secret messages between legitimate users (Alice and Bob). In this system, the legitimate users must obtain permission from the controller in order to exchange their respective quantum information or secret messages simultaneously; the controller is unable to obtain any quantum information or secret messages from the decoding process. Moreover, the presence of the controller also avoids the problem of one legitimate user receiving the quantum information or secret message before the other, and then refusing to help the other user decode the quantum information or secret message. Our proposed protocol is aimed at protecting against external and participant attacks on such a system, and the cost of transmitting quantum bits using our protocol is less than that achieved in other studies. Based on the nonlocal swap gate scheme, the legitimate users exchange their quantum information or secret messages without transmission in a public channel, thus protecting against eavesdroppers stealing the secret messages. PMID:25006596

  15. Non-Hermitian bidirectional robust transport

    NASA Astrophysics Data System (ADS)

    Longhi, Stefano

    2017-01-01

    Transport of quantum or classical waves in open systems is known to be strongly affected by non-Hermitian terms that arise from an effective description of system-environment interaction. A simple and paradigmatic example of non-Hermitian transport, originally introduced by Hatano and Nelson two decades ago [N. Hatano and D. R. Nelson, Phys. Rev. Lett. 77, 570 (1996), 10.1103/PhysRevLett.77.570], is the hopping dynamics of a quantum particle on a one-dimensional tight-binding lattice in the presence of an imaginary vectorial potential. The imaginary gauge field can prevent Anderson localization via non-Hermitian delocalization, opening up a mobility region and realizing robust transport immune to disorder and backscattering. Like for robust transport of topologically protected edge states in quantum Hall and topological insulator systems, non-Hermitian robust transport in the Hatano-Nelson model is unidirectional. However, there is not any physical impediment to observe robust bidirectional non-Hermitian transport. Here it is shown that in a quasi-one-dimensional zigzag lattice, with non-Hermitian (imaginary) hopping amplitudes and a synthetic gauge field, robust transport immune to backscattering can occur bidirectionally along the lattice.

  16. Bidirectional Data Collaborations in Distributed Research

    PubMed Central

    Haynes, Kevin; Selvam, Nandini; Cziraky, Mark J.

    2016-01-01

    Introduction: The need for collaborations with bidirectional data exchange within and across distributed research networks has increased. Currently Existing Activities: This commentary will present currently publically available activities including the Sentinel Initiative, the Patient-Centered Outcomes Research Network (PCORnet), and the NIH Research Collaboratory. Current Technical and Governance Challenges: Even with the advances made in this arena, several technical and governance challenges remain including the evolution of clinically rich data sources and modes of care, availability of longitudinal data resources through data linkage, and the processes to share data and link data resources while ensuring privacy and proprietary control of data. Perspective: These activities will require enhanced levels of trust between entities involved in the delivery of healthcare (Trust 2.0) in addition to the trust health plans and health systems have with patients (Trust 1.0). Recent public funding announcements and public access to data resources will likely improve the landscape of bidirectional data collaborations in distributed research. PMID:27141518

  17. Bottleneck effects on the bidirectional crowd dynamics

    NASA Astrophysics Data System (ADS)

    Yang, Xiao-Xia; Dong, Hai-Rong; Yao, Xiu-Ming; Sun, Xu-Bin

    2016-12-01

    The bottleneck effect on bidirectional crowd dynamics is of great theoretical and practical significance, especially for the designing of corridors in public places, such as subway stations or airports. Based on the famous social force model, this paper investigates the bottleneck effects on the free flow dynamics and breakdown phenomenon under different scenarios, in which different corridor shapes and inflow ratios are considered simultaneously. Numerical simulation finds an interesting self-organization phenomenon in the bidirectional flow, a typical characteristic of such a phenomenon is called lane formation, and the existence of which is independent of the corridor’s shape and inflow rate. However, the pattern of the lane formed by pedestrian flow is related to the corridor’s shape, and the free flow efficiency has close relationship with the inflow rate. Specifically, breakdown phenomenon occurs when inflows from both sides of the corridor are large enough, which mostly originates from the bottleneck and then gradually spreads to the other regions. Simulation results further indicate that the leaving efficiency becomes low as breakdown occurs, and the degree of congestion is proportional to the magnitude of inflow. The findings presented in this paper match well with some of our daily observations, hence it is possible to use them to provide us with theoretical suggestions in design of infrastructures. Project supported jointly by the National Natural Science Foundation of China (Grant Nos. 61322307 and 2016YJS023).

  18. Effects of Noise on Asymmetric Bidirectional Controlled Teleportation

    NASA Astrophysics Data System (ADS)

    Nie, Yi-you; Sang, Ming-huang

    2016-11-01

    We present a scheme for asymmetric bidirectional controlled teleportation via a six-qubit cluster state in noisy environments, which includes the phase-damping and amplitude-damping channels. We analytically derive the fidelities of the asymmetric bidirectional controlled teleportation process in these two noise channels. We show that the fidelities only depend on the initial state and the noisy rate.

  19. Filtering apparatus

    DOEpatents

    Haldipur, Gaurang B.; Dilmore, William J.

    1992-01-01

    A vertical vessel having a lower inlet and an upper outlet enclosure separated by a main horizontal tube sheet. The inlet enclosure receives the flue gas from a boiler of a power system and the outlet enclosure supplies cleaned gas to the turbines. The inlet enclosure contains a plurality of particulate-removing clusters, each having a plurality of filter units. Each filter unit includes a filter clean-gas chamber defined by a plate and a perforated auxiliary tube sheet with filter tubes suspended from each tube sheet and a tube connected to each chamber for passing cleaned gas to the outlet enclosure. The clusters are suspended from the main tube sheet with their filter units extending vertically and the filter tubes passing through the tube sheet and opening in the outlet enclosure. The flue gas is circulated about the outside surfaces of the filter tubes and the particulate is absorbed in the pores of the filter tubes. Pulses to clean the filter tubes are passed through their inner holes through tubes free of bends which are aligned with the tubes that pass the clean gas.

  20. Filtering apparatus

    DOEpatents

    Haldipur, G.B.; Dilmore, W.J.

    1992-09-01

    A vertical vessel is described having a lower inlet and an upper outlet enclosure separated by a main horizontal tube sheet. The inlet enclosure receives the flue gas from a boiler of a power system and the outlet enclosure supplies cleaned gas to the turbines. The inlet enclosure contains a plurality of particulate-removing clusters, each having a plurality of filter units. Each filter unit includes a filter clean-gas chamber defined by a plate and a perforated auxiliary tube sheet with filter tubes suspended from each tube sheet and a tube connected to each chamber for passing cleaned gas to the outlet enclosure. The clusters are suspended from the main tube sheet with their filter units extending vertically and the filter tubes passing through the tube sheet and opening in the outlet enclosure. The flue gas is circulated about the outside surfaces of the filter tubes and the particulate is absorbed in the pores of the filter tubes. Pulses to clean the filter tubes are passed through their inner holes through tubes free of bends which are aligned with the tubes that pass the clean gas. 18 figs.

  1. Ultraviolet filters.

    PubMed

    Shaath, Nadim A

    2010-04-01

    The chemistry, photostability and mechanism of action of ultraviolet filters are reviewed. The worldwide regulatory status of the 55 approved ultraviolet filters and their optical properties are documented. The photostabilty of butyl methoxydibenzoyl methane (avobenzone) is considered and methods to stabilize it in cosmetic formulations are presented.

  2. A reference standard for bidirectional reflection distribution function and bidirectional transmission distribution function measurement

    NASA Technical Reports Server (NTRS)

    Witherow, William K. (Inventor)

    1988-01-01

    A Lambertian reference standard for uniformly scattering a beam of light is constructed of a plate having a planar surface with a layer of glue disposed on the surface. An evenly packed layer of monodisperse spheres is set in the layer, and when the standard is used for bi-directional (BRDF) measurements, the spheres are coated with a layer of highly relective substance, such as gold or silver. When the standard is used for bi-directional transmittance distribution function (BTDF) measurements, the spheres are of a transparent material and are provided with a roughened surface, as by acid etching. In this case, the layer of glue is an optical cement, and the plate is of glass, with the spheres, the layer, and the plate all possessing a similar refractive index.

  3. Bidirectional ventricular tachycardia in cardiac sarcoidosis.

    PubMed

    Benjamin, Mina M; Hayes, Kevin; Field, Michael E; Scheinman, Melvin M; Hoffmayer, Kurt S

    2017-02-01

    A 73-year-old man with history of pulmonary sarcoidosis was found to have runs of non-sustained bidirectional ventricular tachycardia (BVT) with two different QRS morphologies on a Holter monitor. Cardiac magnetic resonance delayed gadolinium imaging revealed a region of patchy mid-myocardial enhancement within the left ventricular basal inferolateral myocardium. An 18-fluorodeoxyglucose positron emission tomography (FDG-PET) showed increased uptake in the same area, consistent with active sarcoid, with no septal involvement. Follow-up FDG-PET one year later showed disease progression with new septal involvement. Cardiac sarcoidosis, characterized by myocardial inflammation and interstitial fibrosis that can lead to conduction system disturbance and macro re-entrant arrhythmias, should be considered in differential diagnosis of BVT. BVT may indicate septal involvement with sarcoidosis before the lesions are large enough to be detected radiologically.

  4. Canopy bidirectional reflectance dependence on leaf orientation

    NASA Technical Reports Server (NTRS)

    Brakke, Thomas W.; Otterman, Joseph

    1990-01-01

    The dependence of the bidirectional reflectance (BR) on the inclination and azimuthal orientation of a leaf is analyzed, with the primary assumption that, in terms of both obscuration and shadowing, the entire canopy consists of the same leaves. The BR patterns of a dense canopy are examined as a function of canopy architecture. It is assumed that the leaves are opaque Lambertian reflectors, having identical orientation and relfecting properties throughout the canopy, and distributed randomly with respect to the the irradiation field and the viewing direction. Analytical expressions are presented and analyzed for the BR factor. It is noted that maximal BR occurs at large viewing zenith angles. A complex and often steep dependence of the BR on azimuthal location is reported, noting that the BR thus depends on the leaf azimuth as well as the zenith angle. It is concluded that the question of azimuthal distribution has to be addressed when conducting model inversions to infer canopy characteristics and architecture.

  5. Bidirectional Relationship Between Diabetes and Acute Pancreatitis

    PubMed Central

    Lee, Yi-Kung; Huang, Ming-Yuan; Hsu, Chen-Yang; Su, Yung-Cheng

    2016-01-01

    Abstract The proposed bidirectional relationship between acute pancreatitis (AP) and diabetes has never been examined with the same source of data. Furthermore, the effects of disease severity on this relationship have not been fully evaluated. The present study employed the findings from a single database to measure the strength of the association between AP and diabetes. Findings from 1 million National Health Insurance beneficiaries were utilized. Two cohort studies with this database were selected to evaluate the linkage between diabetes and AP. The first cohort analysis addressed the risk of AP among diabetic patients and was comprised of 42,080 diabetic patients and 672,146 unexposed subjects. The second cohort analysis considered the risk of diabetes among patients with AP and enrolled 3187 patients with AP and 709259 unexposed subjects. All adult beneficiaries were followed from January 1, 2005 to December 31, 2012 to identify outcomes of interest. Cox regression models were applied to compare hazards adjusted for potential confounders. For the first cohort, the adjusted hazard ratio (HR) of AP was significantly increased by the presence of diabetes (1.72; 95% confidence interval [CI], 1.52–1.96). In diabetic patients with a history of hyperglycemic crisis episodes (HCEs), the HR was even higher (6.32; 95% CI, 4.54–8.81). For the second cohort, the adjusted HR of diabetes in patients with AP was increased compared to the general population (2.15; 95% CI, 1.92–2.41). For patients with severe AP, the HR was also higher (2.22; 95% CI, 1.50–3.29) but did not differ significantly from that for patients with nonsevere AP. The 2 cohort studies provided evidence for the bidirectional relationship between diabetes and AP. Moreover, diabetic patients with history of HCEs may be associated with higher risk of AP. PMID:26765434

  6. Bidirectional Telemetry Controller for Neuroprosthetic Devices

    PubMed Central

    Sharma, Vishnu; McCreery, Douglas B.; Han, Martin; Pikov, Victor

    2010-01-01

    We present versatile multifunctional programmable controller with bidirectional data telemetry, implemented using existing commercial microchips and standard Bluetooth protocol, which adds convenience, reliability, and ease-of-use to neuroprosthetic devices. Controller, weighing 190 g, is placed on animal's back and provides bidirectional sustained telemetry rate of 500 kb/s, allowing real-time control of stimulation parameters and viewing of acquired data. In continuously-active state, controller consumes ∼420 mW and operates without recharge for 8 h. It features independent 16-channel current-controlled stimulation, allowing current steering; customizable stimulus current waveforms; recording of stimulus voltage waveforms and evoked neuronal responses with stimulus artifact blanking circuitry. Flexibility, scalability, cost-efficiency, and a user-friendly computer interface of this device allow use in animal testing for variety of neuroprosthetic applications. Initial testing of the controller has been done in a feline model of brainstem auditory prosthesis. In this model, the electrical stimulation is applied to the array of microelectrodes implanted in the ventral cochlear nucleus, while the evoked neuronal activity was recorded with the electrode implanted in the contralateral inferior colliculus. Stimulus voltage waveforms to monitor the access impedance of the electrodes were acquired at the rate of 312 kilosamples/s. Evoked neuronal activity in the inferior colliculus was recorded after the blanking (transient silencing) of the recording amplifier during the stimulus pulse, allowing the detection of neuronal responses within 100 μs after the end of the stimulus pulse applied in the cochlear nucleus. PMID:19933010

  7. A fast algorithm to predict spectral broadening in CW bidirectionally pumped high-power Yb-doped fiber lasers

    NASA Astrophysics Data System (ADS)

    Szabó, Áron; Várallyay, Zoltán; Rosales-Garcia, Andrea; Headley, Clifford

    2015-11-01

    A detailed, fast-converging iterative numerical method has been developed to model continuous-wave bidirectionally pumped Yb-doped fiber lasers with output powers of several hundred watts. The analysis shows nonlinearity-induced broadening of the lasing spectrum, which also modifies power efficiency. Cavity dynamics is described by combining the effects of Kerr nonlinearities with power evolution equations and rate equations. The fast method to find steady-state solutions for cavity setups is based on setting the temporal phase evolution as a stochastic process with proper spectral filtering. Spectral properties of bidirectionally pumped lasers are calculated within few minutes using a commercial desktop computer, and very good agreement with experimental measurements is obtained for up to 922 W total pump and 708 W output power.

  8. Bidirectional Search in a String with Wavelet Trees

    NASA Astrophysics Data System (ADS)

    Schnattinger, Thomas; Ohlebusch, Enno; Gog, Simon

    Searching for genes encoding microRNAs (miRNAs) is an important task in genome analysis. Because the secondary structure of miRNA (but not the sequence) is highly conserved, the genes encoding it can be determined by finding regions in a genomic DNA sequence that match the structure. It is known that algorithms using a bidirectional search on the DNA sequence for this task outperform algorithms based on unidirectional search. The data structures supporting a bidirectional search (affix trees and affix arrays), however, are rather complex and suffer from their large space consumption. Here, we present a new data structure called bidirectional wavelet index that supports bidirectional search with much less space. With this data structure, it is possible to search for RNA secondary structural patterns in large genomes, for example the human genome.

  9. Effect of particle nonsphericity on bidirectional reflectance of cirrus clouds

    SciTech Connect

    Mishchenko, M.I.; Rossow, W.B.; Macke, A.; Lacis, A.A.

    1996-04-01

    This paper describes the use of the fractal ice particle method to study the differences in bidirectional reflectance caused by the differences in the single scattering phase functions of spherical water droplets and nonspherical ice crystals.

  10. Functional characterization of open chromatin in bidirectional promoters of rice

    PubMed Central

    Fang, Yuan; Wang, Ximeng; Wang, Lei; Pan, Xiucai; Xiao, Jin; Wang, Xiu-e; Wu, Yufeng; Zhang, Wenli

    2016-01-01

    Bidirectional gene pairs tend to be highly coregulated and function in similar biological processes in eukaryotic genomes. Structural features and functional consequences of bidirectional promoters (BDPs) have received considerable attention among diverse species. However, the underlying mechanisms responsible for the bidirectional transcription and coexpression of BDPs remain poorly understood in plants. In this study, we integrated DNase-seq, RNA-seq, ChIP-seq and MNase-seq data and investigated the effect of physical DNase I hypersensitive site (DHS) positions on the transcription of rice BDPs. We found that the physical position of a DHS relative to the TSS of bidirectional gene pairs can affect the expression of the corresponding genes: the closer a DHS is to the TSS, the higher is the expression level of the genes. Most importantly, we observed that the distribution of DHSs plays a significant role in the regulation of transcription and the coexpression of gene pairs, which are possibly mediated by orchestrating the positioning of histone marks and canonical nucleosomes around BDPs. Our results demonstrate that the combined actions of chromatin structures with DHSs, which contain functional cis-elements for interaction with transcriptional machinery, may play an important role in the regulation of the bidirectional transcription or coexpression in rice BDPs. Our findings may help to enhance the understanding of DHSs in the regulation of bidirectional gene pairs. PMID:27558448

  11. Passive Resonant Bidirectional Converter with Galvanic Barrier

    NASA Technical Reports Server (NTRS)

    Rosenblad, Nathan S. (Inventor)

    2014-01-01

    A passive resonant bidirectional converter system that transports energy across a galvanic barrier includes a converter using at least first and second converter sections, each section including a pair of transfer terminals, a center tapped winding; a chopper circuit interconnected between the center tapped winding and one of the transfer terminals; an inductance feed winding interconnected between the other of the transfer terminals and the center tap and a resonant tank circuit including at least the inductance of the center tap winding and the parasitic capacitance of the chopper circuit for operating the converter section at resonance; the center tapped windings of the first and second converter sections being disposed on a first common winding core and the inductance feed windings of the first and second converter sections being disposed on a second common winding core for automatically synchronizing the resonant oscillation of the first and second converter sections and transferring energy between the converter sections until the voltage across the pairs of transfer terminals achieves the turns ratio of the center tapped windings.

  12. Single coil bistable, bidirectional micromechanical actuator

    DOEpatents

    Tabat, Ned; Guckel, Henry

    1998-09-15

    Micromechanical actuators capable of bidirectional and bistable operation can be formed on substrates using lithographic processing techniques. Bistable operation of the microactuator is obtained using a single coil and a magnetic core with a gap. A plunger having two magnetic heads is supported for back and forth linear movement with respect to the gap in the magnetic core, and is spring biased to a neutral position in which the two heads are on each side of the gap in the core. The single electrical coil is coupled to the core and is provided with electrical current to attract one of the heads toward the core by reluctance action to drive the plunger to a limit of travel in one direction. The current is then cut off and the plunger returns by spring action toward the gap, whereafter the current is reapplied to the coil to attract the other head of the plunger by reluctance action to drive the plunger to its other limit of travel. This process can be repeated at a time when switching of the actuator is required.

  13. Motility states in bidirectional cargo transport

    NASA Astrophysics Data System (ADS)

    Klein, Sarah; Appert-Rolland, Cécile; Santen, Ludger

    2015-09-01

    Intracellular cargos which are transported by molecular motors move stochastically along cytoskeleton filaments. In particular for bidirectionally transported cargos it is an open question whether the characteristics of their motion can result from pure stochastic fluctuations or whether some coordination of the motors is needed. The results of a mean-field (MF) model of cargo-motors dynamics proposed by Müller et al. (Müller M. J. et al., Proc. Natl. Acad. Sci. U.S.A., 105 (2008) 4609) suggest the existence of states which are characterized by a symmetric bimodal distribution of cargo velocities. These states would result from a stochastic tug of war. Here we analyze the influence of the MF assumption on the cargo motion by considering a model that takes explicitly the position of each motor into account. We find that those states with symmetric bimodal distributions then disappear. As the MF model implicitly assumes some stepping synchronization between motors, we introduce a partial synchronization via an artificial mutual motor-motor activation, and show that the results of the MF model are then recovered but, even in this favorable case, only in the limit of a strong motor-motor activation and of a high number of motors. We conclude that the MF assumption is not relevant for intracellular transport.

  14. Bidirectional Brush Seals: Post-Test Analysis

    NASA Technical Reports Server (NTRS)

    Hendricks, Robert C.; Wilson, Jack; Wu, Tom Y.; Flower, Ralph; Mullen, Robert L.

    1997-01-01

    A post-test analysis of a set of inside-diameter/outside-diameter (ID/OD) bidirectional brush seals used in three-port wave rotor tests was undertaken to determine brush bristle and configuration wear, pullout, and rotor coating wear. The results suggest that sharp changes in the pressure profiles were not well reflected in bristle tip configuration patterns or wear. Also, positive-to-negative changes in axial pressure gradients appeared to have little effect on the backing plates. Although the brushes had similar porosities, they had very different unpacked arrays. This difference could explain the departure of experimental data from computational fluid dynamics flow predictions for well-packed arrays at higher pressure drops. The rotor wear led to "car-track" scars (upper and lower wear bands) with a whipped surface between the bands. Those bands may have resulted from bristle stiffening at the fence and gap plates during alternate portions of the rotor cycle. Within the bristle response range the wear surface reflected the pressure distribution effect on bristle motion. No sacrificial metallurgical data were taken. The bristles did wear, with correspondingly more wear on the ID brush configurations than on the OD configurations; the complexity in constructing the ID brush was a factor.

  15. Dynamic feature analysis in bidirectional pedestrian flows

    NASA Astrophysics Data System (ADS)

    Xiao-Xia, Yang; Winnie, Daamen; Serge, Paul Hoogendoorn; Hai-Rong, Dong; Xiu-Ming, Yao

    2016-02-01

    Analysis of dynamic features of pedestrian flows is one of the most exciting topics in pedestrian dynamics. This paper focuses on the effect of homogeneity and heterogeneity in three parameters of the social force model, namely desired velocity, reaction time, and body size, on the moving dynamics of bidirectional pedestrian flows in the corridors. The speed and its deviation in free flows are investigated. Simulation results show that the homogeneous higher desired speed which is less than a critical threshold, shorter reaction time or smaller body size results in higher speed of flows. The free dynamics is more sensitive to the heterogeneity in desired speed than that in reaction time or in body size. In particular, an inner lane formation is observed in normal lanes. Furthermore, the breakdown probability and the start time of breakdown are focused on. This study reveals that the sizes of homogeneous desired speed, reaction time or body size play more important roles in affecting the breakdown than the heterogeneities in these three parameters do. Project supported jointly by the National Natural Science Foundation of China (Grant No. 61233001) and the Fundamental Research Funds for Central Universities of China (Grant No. 2013JBZ007).

  16. Filter apparatus

    DOEpatents

    Kuban, Daniel P.; Singletary, B. Huston; Evans, John H.

    1984-01-01

    A plurality of holding tubes are respectively mounted in apertures in a partition plate fixed in a housing receiving gas contaminated with particulate material. A filter cartridge is removably held in each holding tube, and the cartridges and holding tubes are arranged so that gas passes through apertures therein and across the partition plate while particulate material is collected in the cartridges. Replacement filter cartridges are respectively held in holding canisters mounted on a support plate which can be secured to the aforesaid housing, and screws mounted on said canisters are arranged to push replacement cartridges into the cartridge holding tubes and thereby eject used cartridges therefrom.

  17. Filter apparatus

    DOEpatents

    Kuban, D.P.; Singletary, B.H.; Evans, J.H.

    A plurality of holding tubes are respectively mounted in apertures in a partition plate fixed in a housing receiving gas contaminated with particulate material. A filter cartridge is removably held in each holding tube, and the cartridges and holding tubes are arranged so that gas passes through apertures therein and across the the partition plate while particulate material is collected in the cartridges. Replacement filter cartridges are respectively held in holding canisters mounted on a support plate which can be secured to the aforesaid housing, and screws mounted on said canisters are arranged to push replacement cartridges into the cartridge holding tubes and thereby eject used cartridges therefrom.

  18. Sigma Filter

    NASA Technical Reports Server (NTRS)

    Balgovind, R. C.

    1985-01-01

    The GLA Fourth-Order model is needed to smooth the topography. This is to remove the Gibbs phenomenon. The Gibbs phenomenon occurs whenever we truncate a Fourier Series. The Sigma factors were introduced to reduce the Gibbs phenomenon. It is found that the smooth Fourier series is nothing but the original Fourier series with its coefficients multiplied by corresponding sigma factors. This operator can be applied many times to obtain high order sigma filtered field and is easily applicable using FFT. It is found that this filter is beneficial in deriving the topography.

  19. Water Filters

    NASA Technical Reports Server (NTRS)

    1988-01-01

    Seeking to find a more effective method of filtering potable water that was highly contaminated, Mike Pedersen, founder of Western Water International, learned that NASA had conducted extensive research in methods of purifying water on board manned spacecraft. The key is Aquaspace Compound, a proprietary WWI formula that scientifically blends various types of glandular activated charcoal with other active and inert ingredients. Aquaspace systems remove some substances; chlorine, by atomic adsorption, other types of organic chemicals by mechanical filtration and still others by catalytic reaction. Aquaspace filters are finding wide acceptance in industrial, commercial, residential and recreational applications in the U.S. and abroad.

  20. Global evaluation of ammonia bi-directional exchange

    NASA Astrophysics Data System (ADS)

    Zhu, L.; Henze, D.; Bash, J.; Jeong, G.-R.; Cady-Pereira, K.; Shephard, M.; Luo, M.; Paulot, F.; Capps, S.

    2015-02-01

    Bi-directional air-surface exchange of ammonia (NH3) has been neglected in many air quality models. In this study, we implement the bi-directional exchange of NH3 in the GEOS-Chem global chemical transport model. We also introduce an updated diurnal variability scheme for NH3 livestock emissions and evaluate the recently developed MASAGE_NH3 bottom up inventory. While updated diurnal variability improves comparison of modeled-to-hourly in situ measurements in the Southeastern US, NH3 concentrations decrease throughout the globe, up to 17 ppb in India and Southeastern China, with corresponding decreases in aerosol nitrate by up to 7 μg m-3. The ammonium (NH4+) soil pool in the bi-directional exchange model largely extends the NH3 lifetime in the atmosphere. Including bi-directional exchange generally increases NH3 gross emissions (7.1%) and surface concentrations (up to 3.9 ppb) throughout the globe in July, except in India and Southeastern China. In April and October, it decreases NH3 gross emissions in the Northern Hemisphere (e.g., 43.6% in April in China) and increases NH3 gross emissions in the Southern Hemisphere. Bi-directional exchange does not largely impact NH4+ wet deposition overall. While bi-directional exchange is fundamentally a better representation of NH3 emissions from fertilizers, emissions from primary sources are still underestimated and thus significant model biases remain when compared to in situ measurements in the US. The adjoint of bi-directional exchange has also been developed for the GEOS-Chem model and is used to investigate the sensitivity of NH3 concentrations with respect to soil pH and fertilizer application rate. This study thus lays the groundwork for future inverse modeling studies to more directly constrain these physical processes rather than tuning bulk uni-directional NH3 emissions.

  1. APP Function and Lipids: A Bidirectional Link

    PubMed Central

    Grimm, Marcus O. W.; Mett, Janine; Grimm, Heike S.; Hartmann, Tobias

    2017-01-01

    Extracellular neuritic plaques, composed of aggregated amyloid-β (Aβ) peptides, are one of the major histopathological hallmarks of Alzheimer’s disease (AD), a progressive, irreversible neurodegenerative disorder and the most common cause of dementia in the elderly. One of the most prominent risk factor for sporadic AD, carrying one or two aberrant copies of the apolipoprotein E (ApoE) ε4 alleles, closely links AD to lipids. Further, several lipid classes and fatty acids have been reported to be changed in the brain of AD-affected individuals. Interestingly, the observed lipid changes in the brain seem not only to be a consequence of the disease but also modulate Aβ generation. In line with these observations, protective lipids being able to decrease Aβ generation and also potential negative lipids in respect to AD were identified. Mechanistically, Aβ peptides are generated by sequential proteolytic processing of the amyloid precursor protein (APP) by β- and γ-secretase. The α-secretase appears to compete with β-secretase for the initial cleavage of APP, preventing Aβ production. All APP-cleaving secretases as well as APP are transmembrane proteins, further illustrating the impact of lipids on Aβ generation. Beside the pathological impact of Aβ, accumulating evidence suggests that Aβ and the APP intracellular domain (AICD) play an important role in regulating lipid homeostasis, either by direct effects or by affecting gene expression or protein stability of enzymes involved in the de novo synthesis of different lipid classes. This review summarizes the current literature addressing the complex bidirectional link between lipids and AD and APP processing including lipid alterations found in AD post mortem brains, lipids that alter APP processing and the physiological functions of Aβ and AICD in the regulation of several lipid metabolism pathways. PMID:28344547

  2. Notch filter

    NASA Technical Reports Server (NTRS)

    Shelton, G. B. (Inventor)

    1977-01-01

    A notch filter for the selective attenuation of a narrow band of frequencies out of a larger band was developed. A helical resonator is connected to an input circuit and an output circuit through discrete and equal capacitors, and a resistor is connected between the input and the output circuits.

  3. Plasmonic filters.

    SciTech Connect

    Passmore, Brandon Scott; Shaner, Eric Arthur; Barrick, Todd A.

    2009-09-01

    Metal films perforated with subwavelength hole arrays have been show to demonstrate an effect known as Extraordinary Transmission (EOT). In EOT devices, optical transmission passbands arise that can have up to 90% transmission and a bandwidth that is only a few percent of the designed center wavelength. By placing a tunable dielectric in proximity to the EOT mesh, one can tune the center frequency of the passband. We have demonstrated over 1 micron of passive tuning in structures designed for an 11 micron center wavelength. If a suitable midwave (3-5 micron) tunable dielectric (perhaps BaTiO{sub 3}) were integrated with an EOT mesh designed for midwave operation, it is possible that a fast, voltage tunable, low temperature filter solution could be demonstrated with a several hundred nanometer passband. Such an element could, for example, replace certain components in a filter wheel solution.

  4. Water Filter

    NASA Technical Reports Server (NTRS)

    1982-01-01

    A compact, lightweight electrolytic water sterilizer available through Ambassador Marketing, generates silver ions in concentrations of 50 to 100 parts per billion in water flow system. The silver ions serve as an effective bactericide/deodorizer. Tap water passes through filtering element of silver that has been chemically plated onto activated carbon. The silver inhibits bacterial growth and the activated carbon removes objectionable tastes and odors caused by addition of chlorine and other chemicals in municipal water supply. The three models available are a kitchen unit, a "Tourister" unit for portable use while traveling and a refrigerator unit that attaches to the ice cube water line. A filter will treat 5,000 to 10,000 gallons of water.

  5. Eyeglass Filters

    NASA Technical Reports Server (NTRS)

    1987-01-01

    Biomedical Optical Company of America's suntiger lenses eliminate more than 99% of harmful light wavelengths. NASA derived lenses make scenes more vivid in color and also increase the wearer's visual acuity. Distant objects, even on hazy days, appear crisp and clear; mountains seem closer, glare is greatly reduced, clouds stand out. Daytime use protects the retina from bleaching in bright light, thus improving night vision. Filtering helps prevent a variety of eye disorders, in particular cataracts and age related macular degeneration.

  6. Bidirectional promoters of insects: genome-wide comparison, evolutionary implication and influence on gene expression.

    PubMed

    Behura, Susanta K; Severson, David W

    2015-01-30

    Bidirectional promoters are widespread in insect genomes. By analyzing 23 insect genomes we show that the frequency of bidirectional gene pairs varies according to genome compactness and density of genes among the species. The density of bidirectional genes expected based on number of genes per megabase of genome explains the observed density suggesting that bidirectional pairing of genes may be due to random event. We identified specific transcription factor binding motifs that are enriched in bidirectional promoters across insect species. Furthermore, we observed that bidirectional promoters may act as transcriptional hotspots in insect genomes where protein coding genes tend to aggregate in significantly biased (p < 0.001) manner compared to unidirectional promoters. Natural selection seems to have an association with the extent of bidirectionality of genes among the species. The rate of non-synonymous-to-synonymous changes (dN/dS) shows a second-order polynomial distribution with bidirectionality between species indicating that bidirectionality is dependent upon evolutionary pressure acting on the genomes. Analysis of genome-wide microarray expression data of multiple insect species suggested that bidirectionality has a similar association with transcriptome variation across species. Furthermore, bidirectional promoters show significant association with correlated expression of the divergent gene pairs depending upon their motif composition. Analysis of gene ontology showed that bidirectional genes tend to have a common association with functions related to "binding" (including ion binding, nucleotide binding and protein binding) across genomes. Such functional constraint of bidirectional genes may explain their widespread persistence in genome of diverse insect species.

  7. Evidence of bidirectional flow in the sciatic vasa nervorum.

    PubMed

    Olver, Dylan T; Lacefield, James C; Shoemaker, Kevin J

    2014-07-01

    The purpose of this study was to determine whether bidirectional flow exists in the sciatic vasa nervorum. Images obtained using high-frequency color Doppler ultrasound in duplex imaging mode (Vevo 2100) were studied retroactively. In Fig. 1 (left panel; rat 1), the color Doppler signal and flow-velocity waveforms are indicative of pulsatile flow traveling towards (B) and away (C) from the probe. In the right panel (Fig. 1; rat 2), there appears to be three distinct vessels, reflective of non-pulsatile negative flow (D), and pulsatile positive (E) and negative (F) flows. These data confirm the presence of bidirectional arterial flow in the sciatic vasa nervorum. Investigating bidirectional flow in the intact whole nerve may be helpful in elucidating novel features of nerve blood flow control in healthy and diseased states.

  8. Fractional-order bidirectional diffusion for image up-sampling

    NASA Astrophysics Data System (ADS)

    Ren, Zemin; He, Chuanjiang; Li, Meng

    2012-04-01

    Following the recently proposed total variation (TV) up-sampling method, we present a novel image up-sampling algorithm based on fractional-order bidirectional diffusion. For the bidirectional diffusion, the forward diffusion occurs on the light side of edge, while the backward diffusion proceeds on the dark side. This bidirectional diffusion can reduce the edge width and avoid the appearances of false edge or texture and block effects. Moreover, the fractional-order derivative is used to avoid strong contrast near the edge in the interpolated images. The experiments show that, unlike the TV up-sampling (TVUP) method, the proposed algorithm does not suffer from the drift of edges, block effect in the smooth regions, false edges, and false texture.

  9. Bidirectional surface wave splitters excited by a cylindrical wire.

    PubMed

    Zhou, Yong Jin; Jiang, Quan; Cui, Tie Jun

    2011-03-14

    Bidirectional surface wave splitters excited by a cylindrical wire in the microwave frequency have been proposed and fabricated. Compared to the bidirectional subwavelength-slit splitter, the novelty of the proposed structure is the coupling mechanism from the cylindrical wire to the surface gratings. By designing the grating structures with different depths and the feeding wire, electromagnetic waves at the designed frequencies will be confined and guided in the predetermined opposite directions. The finite integral time-domain method is used to model the splitters. Experimental results are presented in the microwave frequencies to verify the new structure, which have very good agreements to the simulated results. Based on the same coupling mechanism, a bidirectional surface wave splitter excited by a cylindrical wire in the terahertz (THz) frequencies is further been proposed and modeled. The simulation results demonstrate the validity of the THz splitter.

  10. Leaf bidirectional reflectance and transmittance in corn and soybean

    NASA Technical Reports Server (NTRS)

    Walter-Shea, E. A.; Norman, J. M.; Blad, B. L.

    1989-01-01

    Bidirectional optical properties of leaves must be adequately characterized to develop comprehensive and reliably predictive canopy radiative-transfer models. Directional reflectance and transmittance factors of individual corn and soybean leaves were measured at source incidence angles (SIAs) 20, 45, and 70 deg and numerous view angles in the visible and NIR. Bidirectional reflectance distributions changed with increasing SIA, with forward scattering most pronounced at 70 deg. Directional-hemispherical reflectance generally increased and transmittance decreased with increased SIA. Directional-hemispherical reflectance factors were higher and transmittances were lower than the nadir-viewed reflectance component.

  11. CRYSTAL FILTER TEST SET

    DTIC Science & Technology

    CRYSTAL FILTERS, *HIGH FREQUENCY, *RADIOFREQUENCY FILTERS, AMPLIFIERS, ELECTRIC POTENTIAL, FREQUENCY, IMPEDANCE MATCHING , INSTRUMENTATION, RADIOFREQUENCY, RADIOFREQUENCY AMPLIFIERS, TEST EQUIPMENT, TEST METHODS

  12. Filtered or Unfiltered?

    ERIC Educational Resources Information Center

    Curry, Ann; Haycock, Ken

    2001-01-01

    Discusses results of a survey questionnaire of public and school libraries that investigated the use of Internet filtering software. Considers filter alternatives; reasons for filtering or not filtering; brand names; satisfaction with site blocking; satisfaction with the decision to install filter software; and guidelines for considering filters.…

  13. Ceramic filters

    SciTech Connect

    Holmes, B.L.; Janney, M.A.

    1995-12-31

    Filters were formed from ceramic fibers, organic fibers, and a ceramic bond phase using a papermaking technique. The distribution of particulate ceramic bond phase was determined using a model silicon carbide system. As the ceramic fiber increased in length and diameter the distance between particles decreased. The calculated number of particles per area showed good agreement with the observed value. After firing, the papers were characterized using a biaxial load test. The strength of papers was proportional to the amount of bond phase included in the paper. All samples exhibited strain-tolerant behavior.

  14. Rocket noise filtering system using digital filters

    NASA Technical Reports Server (NTRS)

    Mauritzen, David

    1990-01-01

    A set of digital filters is designed to filter rocket noise to various bandwidths. The filters are designed to have constant group delay and are implemented in software on a general purpose computer. The Parks-McClellan algorithm is used. Preliminary tests are performed to verify the design and implementation. An analog filter which was previously employed is also simulated.

  15. Dismantling the Bidirectional Relationship between Paediatric Sleep and Anxiety

    ERIC Educational Resources Information Center

    Leahy, Erin; Gradisar, Michael

    2012-01-01

    Background: Sleep-related problems are a common occurrence during childhood and adolescence. Over the past decade, there has been mounting evidence for a relationship between sleep disturbance and anxiety during this developmental period. The literature suggests that these associations are likely complex and bidirectional. That is, sleep…

  16. Internet over a Bi-Directional Satellite Link

    NASA Technical Reports Server (NTRS)

    Griner, Jim; Allman, Mark; Mallasch, Paul; Stewart, David

    1998-01-01

    Various issues associated with "Internet over a Bi-Directional Satellite Link" are presented in viewgraph form. Specific topics include: 1) Comarison of HTTP over several network channels; 2) Improved performance of HTTP when compared to off-the-shelf software; 3) Demonstration setup of the link between Sheraton Airport Hotel, Dulles and NASA LeRC; and 4) HTTP comparison pages.

  17. "Figuring" Bidirectional Home and School Connections along the Biliteracy Continuum

    ERIC Educational Resources Information Center

    Fránquiz, María E.; Leija, María G.; Garza, Irene

    2015-01-01

    This article centers on the significant practices identified by bilingual teachers who participated in Proyecto Bilingüe, a specialized master's degree program. The notion of bidirectional theory of bilingual pedagogy and the theoretical construct of the continua of biliteracy are utilized to illustrate how the teachers centered home and school…

  18. Bidirectional Associations among Sensitive Parenting, Language Development, and Social Competence

    ERIC Educational Resources Information Center

    Barnett, Melissa A.; Gustafsson, Hanna; Deng, Min; Mills-Koonce, W. Roger; Cox, Martha

    2012-01-01

    Rapid changes in language skills and social competence, both of which are linked to sensitive parenting, characterize early childhood. The present study examines bidirectional associations among mothers' sensitive parenting and children's language skills and social competence from 24 to 36?months in a community sample of 174 families. In addition,…

  19. Parenting and Children's Externalizing Behavior: Bidirectionality during Toddlerhood

    ERIC Educational Resources Information Center

    Verhoeven, Marjolein; Junger, Marianne; van Aken, Chantal; Dekovic, Maja; van Aken, Marcel A. G.

    2010-01-01

    This study examined the bidirectional relationship between parenting and boys' externalizing behaviors in a four-wave longitudinal study of toddlers. Participants were 104 intact two-parent families with toddler sons. When their sons were 17, 23, 29, and 35 months of age, mothers and fathers reported on a broad range of parenting dimensions…

  20. Bidirectional Relations between Authoritative Parenting and Adolescents' Prosocial Behaviors

    ERIC Educational Resources Information Center

    Padilla-Walker, Laura M.; Carlo, Gustavo; Christensen, Katherine J.; Yorgason, Jeremy B.

    2012-01-01

    This study examined the bidirectional relations between authoritative parenting and adolescents' prosocial behavior over a 1-year time period. Data were taken from Time 2 and 3 of the Flourishing Families Project, and included reports from 319 two-parent families with an adolescent child (M age of child at Time 2 = 12.34, SD = 1.06, 52% girls).…

  1. Longitudinal Bidirectional Relations between Adolescents' Sympathy and Prosocial Behavior

    ERIC Educational Resources Information Center

    Carlo, Gustavo; Padilla-Walker, Laura M.; Nielson, Matthew G.

    2015-01-01

    Despite the importance of understanding sympathy and prosocial behaviors, research on the development of these tendencies in adolescence remains relatively sparse. In the present study, we examined age trends and bidirectional longitudinal relations in sympathy and prosocial behaviors across early to middle adolescents. Participants were 500…

  2. Bidirectional transcription of trinucleotide repeats: roles for excision repair

    PubMed Central

    Budworth, Helen; McMurray, Cynthia T.

    2013-01-01

    SUMMARY Genomic instability at repetitive DNA regions in cells of the nervous system leads to a number of neurodegenerative and neuromuscular diseases, including those with an expanded trinucleotide repeat (TNR) tract at or nearby an expressed gene. Expansion causes disease when a particular base sequence is repeated beyond the normal range, interfering with the expression or properties of a gene product. Disease severity and onset depend on the number of repeats. As the length of the repeat tract grows, so does the size of the successive expansions and the likelihood of another unstable event. In fragile X syndrome, for example, CGG repeat instability and pathogenesis are not typically observed below tracts of roughly 50 repeats, but occur frequently at or above 55 repeats, and are virtually certain above 100–300 repeats. Recent evidence points to bidirectional transcription as a new aspect of TNR instability and pathophysiology. Bidirectional transcription of TNR genes produces novel proteins and/or regulatory RNAs that influence both toxicity and epigenetic changes in TNR promoters. Bidirectional transcription of the TNR tract appears to influence aspects of its stability, gene processing, splicing, gene silencing, and chemical modification of DNAs. Paradoxically, however, some of the same effects are observed on both the expanded TNR gene and on its normal gene counterpart. In this review, we discuss the possible normal and abnormal effects of bidirectional transcription on trinucleotide repeat instability, the role of DNA repair in causing, preventing, or maintaining methylation, and chromatin environment of TNR genes. PMID:23669397

  3. Outpatient blood pressure monitoring using bi-directional text messaging.

    PubMed

    Anthony, Chris A; Polgreen, Linnea A; Chounramany, James; Foster, Eric D; Goerdt, Christopher J; Miller, Michelle L; Suneja, Manish; Segre, Alberto M; Carter, Barry L; Polgreen, Philip M

    2015-05-01

    To diagnose hypertension, multiple blood pressure (BP) measurements are recommended. We randomized patients into three groups: EMR-only (patients recorded BP measurements in an electronic medical record [EMR] web portal), EMR + reminders (patients were sent text message reminders to record their BP measurements in the EMR), and bi-directional text messaging (patients were sent a text message asking them to respond with their current BP). Subjects were asked to complete 14 measurements. Automated messages were sent to each patient in the bi-directional text messaging and EMR + reminder groups twice daily. Among 121 patients, those in the bi-directional text messaging group reported the full 14 measurements more often than both the EMR-only group (P < .001) and the EMR + reminders group (P = .038). Also, the EMR + reminders group outperformed the EMR-only group (P < .001). Bi-directional automated text messaging is an effective way to gather patient BP data. Text-message-based reminders alone are an effective way to encourage patients to record BP measurements.

  4. Optical system designs based on bi-directional sensor devices

    NASA Astrophysics Data System (ADS)

    Grossmann, Constanze; Gawronski, Ute; Perske, Franziska; Notni, Gunther; Tünnermann, Andreas

    2012-10-01

    Small and compact optical system designs are needed in nearly all application scenarios of optical projection and imaging systems, e.g. automotive, metrology, medical or multimedia. Most active optical systems are based on separated imaging (e.g. camera unit) and image generating units (e.g. projection unit). This fact limits the geometrical miniaturization of the system. We present compact optical system designs using the new technology of bi-directional sensor devices. These devices combine light emitting and light detecting elements on one single chip. The application of such innovative opto-electronic devices - so-called bi-directional OLED microdisplays (BiMiDs) - offer a huge potential for miniaturization with a simultaneous increase of performance due to a new integration step. For these new bi-directional sensor devices new optical design concepts for simultaneous and sequential emission and detection are necessary. Because the simultaneous emission and detection can disturb the functionality of the optical system. New concepts has to be applied. A first concept is an exemplary 3-D metrology system applying fringe projection. A second concept is a pico-projection system with an integrated camera function. For both concepts the system configurations and the optical design are discussed. Due to the application of the bi-directional sensor device ultra-compact systems are presented.

  5. A Bidirectional High-Power-Quality Grid Interface With a Novel Bidirectional Noninverted Buck Boost Converter for PHEVs

    SciTech Connect

    Onar, Omer C

    2012-01-01

    Plug-in hybrid electric vehicles (PHEVs) will play a vital role in future sustainable transportation systems due to their potential in terms of energy security, decreased environmental impact, improved fuel economy, and better performance. Moreover, new regulations have been established to improve the collective gas mileage, cut greenhouse gas emissions, and reduce dependence on foreign oil. This paper primarily focuses on two major thrust areas of PHEVs. First, it introduces a grid-friendly bidirectional alternating current/direct current ac/dc dc/ac rectifier/inverter for facilitating vehicle-to-grid (V2G) integration of PHEVs. Second, it presents an integrated bidirectional noninverted buck boost converter that interfaces the energy storage device of the PHEV to the dc link in both grid-connected and driving modes. The proposed bidirectional converter has minimal grid-level disruptions in terms of power factor and total harmonic distortion, with less switching noise. The integrated bidirectional dc/dc converter assists the grid interface converter to track the charge/discharge power of the PHEV battery. In addition, while driving, the dc/dc converter provides a regulated dc link voltage to the motor drive and captures the braking energy during regenerative braking.

  6. A General Method of Selecting Quantum Channel for Bidirectional Quantum Teleportation

    NASA Astrophysics Data System (ADS)

    Fu, Hong-Zi; Tian, Xiu-Lao; Hu, Yang

    2014-06-01

    Based on tensor representation and Bell basis measurement in bidirectional quantum teleportation, a criterion that can be used to judge whether a four-qubit quantum state can be regarded as quantum channel or not in bidirectional teleportation is suggested and a theoretical scheme of bidirectional teleportation via four-qubit state as the quantum channel is proposed. In accordance with this criterion we give a general method of selecting quantum channel in bidirectional teleportation, which is determined by the channel parameter matrix R in the Bell basis measurement. This general method provide a theoretical basis for quantum channel selection in bidirectional quantum teleportation experiments.

  7. NOVEL MICROWAVE FILTER DESIGN TECHNIQUES.

    DTIC Science & Technology

    ELECTROMAGNETIC WAVE FILTERS, MICROWAVE FREQUENCY, PHASE SHIFT CIRCUITS, BANDPASS FILTERS, TUNED CIRCUITS, NETWORKS, IMPEDANCE MATCHING , LOW PASS FILTERS, MULTIPLEXING, MICROWAVE EQUIPMENT, WAVEGUIDE FILTERS, WAVEGUIDE COUPLERS.

  8. Personalized recommendation based on preferential bidirectional mass diffusion

    NASA Astrophysics Data System (ADS)

    Chen, Guilin; Gao, Tianrun; Zhu, Xuzhen; Tian, Hui; Yang, Zhao

    2017-03-01

    Recommendation system provides a promising way to alleviate the dilemma of information overload. In physical dynamics, mass diffusion has been used to design effective recommendation algorithms on bipartite network. However, most of the previous studies focus overwhelmingly on unidirectional mass diffusion from collected objects to uncollected objects, while overlooking the opposite direction, leading to the risk of similarity estimation deviation and performance degradation. In addition, they are biased towards recommending popular objects which will not necessarily promote the accuracy but make the recommendation lack diversity and novelty that indeed contribute to the vitality of the system. To overcome the aforementioned disadvantages, we propose a preferential bidirectional mass diffusion (PBMD) algorithm by penalizing the weight of popular objects in bidirectional diffusion. Experiments are evaluated on three benchmark datasets (Movielens, Netflix and Amazon) by 10-fold cross validation, and results indicate that PBMD remarkably outperforms the mainstream methods in accuracy, diversity and novelty.

  9. A mixing evolution model for bidirectional microblog user networks

    NASA Astrophysics Data System (ADS)

    Yuan, Wei-Guo; Liu, Yun

    2015-08-01

    Microblogs have been widely used as a new form of online social networking. Based on the user profile data collected from Sina Weibo, we find that the number of microblog user bidirectional friends approximately corresponds with the lognormal distribution. We then build two microblog user networks with real bidirectional relationships, both of which have not only small-world and scale-free but also some special properties, such as double power-law degree distribution, disassortative network, hierarchical and rich-club structure. Moreover, by detecting the community structures of the two real networks, we find both of their community scales follow an exponential distribution. Based on the empirical analysis, we present a novel evolution network model with mixed connection rules, including lognormal fitness preferential and random attachment, nearest neighbor interconnected in the same community, and global random associations in different communities. The simulation results show that our model is consistent with real network in many topology features.

  10. Bidirectional imperfect quantum teleportation with a single Bell state

    NASA Astrophysics Data System (ADS)

    Kiktenko, E. O.; Popov, A. A.; Fedorov, A. K.

    2016-06-01

    We present a bidirectional modification of the standard one-qubit teleportation protocol, where both Alice and Bob transfer noisy versions of their qubit states to each other by using single Bell state and auxiliary (trigger) qubits. Three schemes are considered: the first where the actions of parties are governed by two independent quantum random triggers, the second with single random trigger, and the third as a mixture of the first two. We calculate the fidelities of teleportation for all schemes and find a condition on correlation between trigger qubits in the mixed scheme which allows us to overcome the classical fidelity boundary of 2/3. We apply the Choi-Jamiolkowski isomorphism to the quantum channels obtained in order to investigate an interplay between their ability to transfer the information, entanglement-breaking property, and auxiliary classical communication needed to form correlations between trigger qubits. The suggested scheme for bidirectional teleportation can be realized by using current experimental tools.

  11. Radiative property investigation. [bidirectional reflectance distribution of paints

    NASA Technical Reports Server (NTRS)

    Scott, R. L., Jr.

    1975-01-01

    Measurements of the bidirectional reflections of NASA paints Z-93 and S-13G were made for 0.5, 1.78, and 2.5 microns, source incidence angles of 0, 30, 60, and 75 deg, and four detector azimuth positions. The bidirectional reflectance distribution was found to be near Lambert for azimuth positions not to close to 180 deg from the source incident azimuth. The reflectance distribution at an azimuth of 180 deg from the source is close to Lambert for near normal source incidents angles, and becomes much larger than Lambert as the source incident angle approach grazing. The reflectance deviates from Lambert as the wavelength increases. Comparison of data for the paints shows Z-93 reflectance is much closer to Lambert than S-13G. When there is a peak in the reflectance distribution it occurred at the specular angle or an angle larger than the specular angle.

  12. The influence of following on bidirectional flow through a doorway

    NASA Astrophysics Data System (ADS)

    Graves, Amy; Diamond, Rachel; Saakashvili, Eduard

    Pedestrian dynamics is a subset of the study of self-propelled particles. We simulate two species of pedestrians undergoing bidirectional flow through a narrow doorway. Using the Helbing-Monlár-Farkas-Vicsek Social Force Model, our pedestrians are soft discs that experience psychosocial and physical contact forces. We vary the ``following'' parameter which determines the degree to which a pedestrian matches its direction of movement to the average of nearby, same-species pedestrians. Current density, efficiency and statistics of bursts and lags are calculated. These indicate that choosing different following parameters for each species affects the efficacy of transport - greater following being associated with lower efficacy. The information entropy associated with velocity and the long time tails of the complementary CDF of lag times are additional indicators of the dynamical consequences of following during bidirectional flow. Acknowledgement is made to the donors of the ACS Petrolium Research Fund, and the Vandervelde-Cheung Fund of Swarthmore College.

  13. Simulation Study of Traffic Accidents in Bidirectional Traffic Models

    NASA Astrophysics Data System (ADS)

    Moussa, Najem

    Conditions for the occurrence of bidirectional collisions are developed based on the Simon-Gutowitz bidirectional traffic model. Three types of dangerous situations can occur in this model. We analyze those corresponding to head-on collision; rear-end collision and lane-changing collision. Using Monte Carlo simulations, we compute the probability of the occurrence of these collisions for different values of the oncoming cars' density. It is found that the risk of collisions is important when the density of cars in one lane is small and that of the other lane is high enough. The influence of different proportions of heavy vehicles is also studied. We found that heavy vehicles cause an important reduction of traffic flow on the home lane and provoke an increase of the risk of car accidents.

  14. Effects of bidirectional regulation on noises in gene networks.

    PubMed

    Zheng, Xiudeng; Tao, Yi

    2010-03-14

    To investigate the effects of bidirectional regulation on the noise in protein concentration, a theoretical and simple three-gene network model is considered. The basic idea behind this model is from Paulsson's proposition (J. Paulsson, Phys. Life Rev. 2005, 2, 157-175), where the synthesis and degradation of a mRNA species corresponding to a target protein are regulated directly and indirectly by a certain sigma-factor, and a random increase in the concentration of the sigma-factor should increase both the synthesis and degradation rates of the mRNA species (bidirectional regulation). Using the standard Omega-expansion technique (linear noise approximation) and Monte Carlo simulation, our main results show clearly that for the steady-state statistics the effects of the noise of the sigma-factor on the stochastic fluctuation of the target protein could partially cancel out.

  15. Longitudinal bidirectional relations between adolescents' sympathy and prosocial behavior.

    PubMed

    Carlo, Gustavo; Padilla-Walker, Laura M; Nielson, Matthew G

    2015-12-01

    Despite the importance of understanding sympathy and prosocial behaviors, research on the development of these tendencies in adolescence remains relatively sparse. In the present study, we examined age trends and bidirectional longitudinal relations in sympathy and prosocial behaviors across early to middle adolescents. Participants were 500 12-year-olds at Time 1 (52% girls, 70% European American) who completed measures of sympathy and prosocial behaviors at 5 different time points, each approximately 1 year apart. Results showed significant bidirectional relations between sympathy and prosocial behaviors across all time points, and an initial decrease of prosocial behaviors followed by an increase into middle adolescence. The implications for prosocial developmental theories and research are discussed. (PsycINFO Database Record

  16. Bidirectional selection between two classes in complex social networks.

    PubMed

    Zhou, Bin; He, Zhe; Jiang, Luo-Luo; Wang, Nian-Xin; Wang, Bing-Hong

    2014-12-19

    The bidirectional selection between two classes widely emerges in various social lives, such as commercial trading and mate choosing. Until now, the discussions on bidirectional selection in structured human society are quite limited. We demonstrated theoretically that the rate of successfully matching is affected greatly by individuals' neighborhoods in social networks, regardless of the type of networks. Furthermore, it is found that the high average degree of networks contributes to increasing rates of successful matches. The matching performance in different types of networks has been quantitatively investigated, revealing that the small-world networks reinforces the matching rate more than scale-free networks at given average degree. In addition, our analysis is consistent with the modeling result, which provides the theoretical understanding of underlying mechanisms of matching in complex networks.

  17. Bidirectionality in synesthesia: evidence from a multiplication verification task.

    PubMed

    Gevers, Wim; Imbo, Ineke; Cohen Kadosh, Roi; Fias, Wim; Hartsuiker, Robert J

    2010-01-01

    Color-grapheme synesthetes automatically perceive achromatic numbers as colored (e.g., 7 is turquoise). Up until recently, synesthesia was believed to be unidirectional. For instance, the number 7 gives rise to the percept of turquoise but the perception of turquoise does not trigger the number 7. However, some recent studies argue for bidirectional connections Cohen Kadosh et al., 2005; Johnson et al., 2007; Knoch et al., 2005). In this study, a multiplication verification task (e.g., 7 x 2 = 14, true/false?) was used to test bidirectionality. In agreement with previous studies we observed that the presentation of colors evokes numerical magnitudes. The current findings add two important notions to previous studies: (a) The influence of color on the processing of numerical information can be extended to multiplication verification tasks and (b) The perception of color can both facilitate and interfere with the processing of digit-related information.

  18. Asymmetric Bidirectional Controlled Teleportation via Seven-qubit Cluster State

    NASA Astrophysics Data System (ADS)

    Yang, Yu-Quan; Zha, Xin-Wei; Yu, Yan

    2016-10-01

    We propose a new protocol of asymmetric bidirectional controlled teleportation by using a seven-qubit cluster state as the quantum channel. That is to say Alice wants to transmit an arbitrary single-qubit state to Bob and Bob wants to transmit an arbitrary two qubit state to Alice via the control of the supervisor Charlie. One only need perform the Bell-state measurements and single-qubit measurement.

  19. Optimized free energies from bidirectional single-molecule force spectroscopy.

    PubMed

    Minh, David D L; Adib, Artur B

    2008-05-09

    An optimized method for estimating path-ensemble averages using data from processes driven in opposite directions is presented. Based on this estimator, bidirectional expressions for reconstructing free energies and potentials of mean force from single-molecule force spectroscopy-valid for biasing potentials of arbitrary stiffness-are developed. Numerical simulations on a model potential indicate that these methods perform better than unidirectional strategies.

  20. Bichromatic emission and multimode dynamics in bidirectional ring lasers

    SciTech Connect

    Perez-Serrano, Antonio; Javaloyes, Julien; Balle, Salvador

    2010-04-15

    The multimode dynamics of a two-level ring laser is explored numerically using a bidirectional traveling wave model retaining the spatial effects due to the presence of counter-propagating electric fields in the population inversion. Dynamical regimes where the emission in each direction occurs at different wavelengths are studied. Mode-locked unidirectional emission for large gain bandwidth and relatively small detuning is reported.

  1. a Bidirectional Reflectance Model for Non-Random Canopies.

    NASA Astrophysics Data System (ADS)

    Welles, Jonathan Mark

    The general array model (GAR) is extended to calculate bidirectional reflectance (reflectance as a function of angle of view and angle of illumination) of a plant stand. The new model (BIGAR) defines the plant canopy as one or more foliage-containing ellipsoids arranged in any desired pattern. Foliage is assumed randomly distributed within each ellipsoid, with a specified distribution of inclination angles and random azimuthal orientation distribution. A method of specifying sub-ellipsoids that contain foliage of varying properties is discussed. Foliage is assumed to scatter radiation in a Lambertian fashion. The soil bidirectional reflectance is modelled separately as a boundary condition. The reflectance of any given grid point within the plant stand is calculated from the incident radiation (direct beam, diffuse sky, and diffuse scattered from the soil and foliage) and a view weighting factor that is based upon how much of the view is occupied by that particular grid point. Integrating this over a large number of grid locations provides a prediction of the bidirectional reflectance. Model predictions are compared with measurements in corn and soybean canopies at three stages of growth. The model does quite well in predicting the general shape and dynamics of the measured bidirectional reflectance factors, and rms errors are typically 10% to 15% (relative) of the integrated reflectance value. The effect of rows is evident in both the measurements and the model in the early part of the growing season. The presence of tassles in the corn may be the cause of unpredicted row effects later in the season. Predicted nadir reflectances are accurate for soybean, but are low for full cover corn. The presence of specular reflection causes the model to slightly underpredict reflectances looking toward the sun at large solar zenith angles.

  2. Fatigue testing of thermoformed bidirectional LDF™-composites

    NASA Astrophysics Data System (ADS)

    Schuster, J.; Friedrich, K.

    1994-01-01

    Specimens made of Long Discontinuous Fiber (LDF™) composite material were elongated to different states of deformation by thermoforming. Tension-tension-fatigue tests were performed using waisted bidirectional specimens cut out of the thermoformed parts. These resulted in similar shapes of the Wöhler-curves fairly independently of the deformation state of the LDF™-material. In addition, the static strength values were not very much influenced by the elongation of the specimens. The specimens were nondestructively inspected by ultrasonics and thermography.

  3. Bidirectional reflectance modeling of non-homogeneous plant canopies

    NASA Technical Reports Server (NTRS)

    Norman, John M.

    1986-01-01

    The objective of this research is to develop a 3-dimensional radiative transfer model for predicting the bidirectional reflectance distribution function (BRDF) for heterogeneous vegetation canopies. Leaf bidirectional reflectance and transmittance distribution functions were measured for corn and soybean leaves. The measurements clearly show that leaves are complex scatterers and considerable specular reflectance is possible. Because of the character of leaf reflectance, true leaf reflectance is larger than the nadir reflectances that are normally used to represent leaves. A 3-dimensional reflectance model, named BIGAR (Bidirectional General Array Model), was developed and compared with measurements from corn and soybean. The model is based on the concept that heterogeneous canopies can be described by a combination of many subcanopies, which contain all the foliage, and these subcanopy envelopes can be characterized by ellipsoids of various sizes and shapes. The model/measurement comparison results indicate that this relatively simple model captures the essential character of row crop BRDF's. Finally, two soil BDRF models were developed: one represents soil particles as rectangular blocks and the other represents soil particles as spheres. The sphere model was found to be superior.

  4. Filter quality of pleated filter cartridges.

    PubMed

    Chen, Chun-Wan; Huang, Sheng-Hsiu; Chiang, Che-Ming; Hsiao, Ta-Chih; Chen, Chih-Chieh

    2008-04-01

    The performance of dust cartridge filters commonly used in dust masks and in room ventilation depends both on the collection efficiency of the filter material and the pressure drop across the filter. Currently, the optimization of filter design is based only on minimizing the pressure drop at a set velocity chosen by the manufacturer. The collection efficiency, an equally important factor, is rarely considered in the optimization process. In this work, a filter quality factor, which combines the collection efficiency and the pressure drop, is used as the optimization criterion for filter evaluation. Most respirator manufacturers pleat the filter to various extents to increase the filtration area in the limit space within the dust cartridge. Six sizes of filter holders were fabricated to hold just one pleat of filter, simulating six different pleat counts, ranging from 0.5 to 3.33 pleats cm(-1). The possible electrostatic charges on the filter were removed by dipping in isopropyl alcohol, and the air velocity is fixed at 100 cm s(-1). Liquid dicotylphthalate particles generated by a constant output atomizer were used as challenge aerosols to minimize particle loading effects. A scanning mobility particle sizer was used to measure the challenge aerosol number concentrations and size distributions upstream and downstream of the pleated filter. The pressure drop across the filter was monitored by using a calibrated pressure transducer. The results showed that the performance of pleated filters depend not only on the size of the particle but also on the pleat count of the pleated filter. Based on filter quality factor, the optimal pleat count (OPC) is always higher than that based on pressure drop by about 0.3-0.5 pleats cm(-1). For example, the OPC is 2.15 pleats cm(-1) from the standpoint of pressure drop, but for the highest filter quality factor, the pleated filter needed to have a pleat count of 2.65 pleats cm(-1) at particle diameter of 122 nm. From the aspect of

  5. HEPA filter dissolution process

    DOEpatents

    Brewer, K.N.; Murphy, J.A.

    1994-02-22

    A process is described for dissolution of spent high efficiency particulate air (HEPA) filters and then combining the complexed filter solution with other radioactive wastes prior to calcining the mixed and blended waste feed. The process is an alternate to a prior method of acid leaching the spent filters which is an inefficient method of treating spent HEPA filters for disposal. 4 figures.

  6. Hepa filter dissolution process

    DOEpatents

    Brewer, Ken N.; Murphy, James A.

    1994-01-01

    A process for dissolution of spent high efficiency particulate air (HEPA) filters and then combining the complexed filter solution with other radioactive wastes prior to calcining the mixed and blended waste feed. The process is an alternate to a prior method of acid leaching the spent filters which is an inefficient method of treating spent HEPA filters for disposal.

  7. Recirculating electric air filter

    DOEpatents

    Bergman, Werner

    1986-01-01

    An electric air filter cartridge has a cylindrical inner high voltage eleode, a layer of filter material, and an outer ground electrode formed of a plurality of segments moveably connected together. The outer electrode can be easily opened to remove or insert filter material. Air flows through the two electrodes and the filter material and is exhausted from the center of the inner electrode.

  8. HEPA filter dissolution process

    SciTech Connect

    Brewer, K.N.; Murphy, J.A.

    1992-12-31

    This invention is comprised of a process for dissolution of spent high efficiency particulate air (HEPA) filters and then combining the complexed filter solution with other radioactive wastes prior to calcining the mixed and blended waste feed. The process is an alternate to a prior method of acid leaching the spent filters which is an inefficient method of treating spent HEPA filters for disposal.

  9. Recirculating electric air filter

    DOEpatents

    Bergman, W.

    1985-01-09

    An electric air filter cartridge has a cylindrical inner high voltage electrode, a layer of filter material, and an outer ground electrode formed of a plurality of segments moveably connected together. The outer electrode can be easily opened to remove or insert filter material. Air flows through the two electrodes and the filter material and is exhausted from the center of the inner electrode.

  10. Bidirectional 60-GHz radio-over-fiber systems with downstream OFDMA and wavelength reuse upstream SC-FDMA.

    PubMed

    Zhang, Cheng; Duan, Jun; Li, Juhao; Hu, Weiwei; Li, Hongbin; Wu, Hequan; Chen, Zhangyuan

    2010-08-30

    We have proposed and experimentally demonstrated a 60-GHz bidirectional radio-over-fiber system with downstream orthogonal frequency division multiplexing address (OFDMA) and wavelength reuse upstream single-carrier frequency division multiple address (SC-FDMA). In the downstream, a 3-dB optical coupler is used for two-carrier injection-locking a distributed feedback (DFB) laser in order to realize the single-sideband modulation. In the upstream, the weakly modulated one of the two downstream carriers is filtered out for wavelength reuse. Transmission of 9.65-Gb/s 16-QAM downstream OFDMA on 60-GHz carrier and 5-Gb/s QPSK upstream SC-FDMA (2.5 Gb/s for each user) are both successfully demonstrated over 53-km standard single mode fiber without chromatic dispersion compensation. The crosstalk between the downstream OFDMA and the upstream SC-FDMA can be neglected.

  11. The Single-phase AC Regulator on Base of Bidirectional IGBT Switches

    NASA Astrophysics Data System (ADS)

    Cimanis, Vladimirs; Hramcovs, Vladimirs; Rankis, Ivars

    2010-01-01

    In the work one of the methods for regulation of sinus shape AC voltage for middle-power loads with activeinductive character is observed. Such a regulator keeping output voltage of sinus shape must be fast-reacting and work in closed-loop system. It's shown, that for providing such features Buck and Boost pulse regulators can be applied. The only difference from DC pulse converters is that electronic switches in the system must be with bidirectional conductivity. For this reason an IGBT transistors can be applied with implemented in structure reverse diodes and if such two transistors are connected in series and with contrary conductivity then at activating both one of them will be in on-state. Realization of AC regulators with such switches is described in the work. Results of computer modeling also are given. Output voltage ripples are investigated on subject of their range and efficiency of filtering equipment on LC base. Such regulators can be applied for instance in electrical transport self supply systems.

  12. Bifurcation Analysis of a DC-DC Bidirectional Power Converter Operating with Constant Power Loads

    NASA Astrophysics Data System (ADS)

    Cristiano, Rony; Pagano, Daniel J.; Benadero, Luis; Ponce, Enrique

    Direct current (DC) microgrids (MGs) are an emergent option to satisfy new demands for power quality and integration of renewable resources in electrical distribution systems. This work addresses the large-signal stability analysis of a DC-DC bidirectional converter (DBC) connected to a storage device in an islanding MG. This converter is responsible for controlling the balance of power (load demand and generation) under constant power loads (CPLs). In order to control the DC bus voltage through a DBC, we propose a robust sliding mode control (SMC) based on a washout filter. Dynamical systems techniques are exploited to assess the quality of this switching control strategy. In this sense, a bifurcation analysis is performed to study the nonlinear stability of a reduced model of this system. The appearance of different bifurcations when load parameters and control gains are changed is studied in detail. In the specific case of Teixeira Singularity (TS) bifurcation, some experimental results are provided, confirming the mathematical predictions. Both a deeper insight in the dynamic behavior of the controlled system and valuable design criteria are obtained.

  13. Scintillation model of laser beam propagation in satellite-to-ground bidirectional atmospheric channels

    NASA Astrophysics Data System (ADS)

    Toyoshima, Morio; Sasaki, Takashi; Takenaka, Hideki; Takayama, Yoshihisa

    2012-11-01

    This paper discusses a scintillation model of laser beam propagation in satellite-to-ground bidirectional atmospheric channels. The frequency characteristics of the downlink were theoretically derived on the basis of measurements in low Earth orbit satellite-to-ground laser communication experiments. The speckle patterns were averaged and the frequency response of the received optical signal was filtered by a telescope aperture. The model parameters were obtained by fitting the results to the model. This paper introduces scaling factors for the uplink and extends the theory for the downlink to that for the uplink. The proposed model can generate time-varying optical signals based on the von Kármán spectrum for space-to-ground laser links. The scintillation index was estimated using the modified Hufnagel-Valley model, which was obtained from real measurements. The probability density function was fitted by the estimated scintillation index and compared to the gamma-gamma distribution under strong turbulence conditions. The scaling factor for the root mean square wind speed was newly introduced to fit the frequency spectra for the uplink. The simulation results are presented in this paper. The proposed scintillation model can contribute to improving the fading simulation of satellite-to-ground communication links as well as add to the future discussion of standards, like those proposed by the Consultative Committee for Space Data Systems.

  14. Shaping the Dynamics of a Bidirectional Neural Interface

    PubMed Central

    Vato, Alessandro; Semprini, Marianna; Maggiolini, Emma; Szymanski, Francois D.; Fadiga, Luciano; Panzeri, Stefano; Mussa-Ivaldi, Ferdinando A.

    2012-01-01

    Progress in decoding neural signals has enabled the development of interfaces that translate cortical brain activities into commands for operating robotic arms and other devices. The electrical stimulation of sensory areas provides a means to create artificial sensory information about the state of a device. Taken together, neural activity recording and microstimulation techniques allow us to embed a portion of the central nervous system within a closed-loop system, whose behavior emerges from the combined dynamical properties of its neural and artificial components. In this study we asked if it is possible to concurrently regulate this bidirectional brain-machine interaction so as to shape a desired dynamical behavior of the combined system. To this end, we followed a well-known biological pathway. In vertebrates, the communications between brain and limb mechanics are mediated by the spinal cord, which combines brain instructions with sensory information and organizes coordinated patterns of muscle forces driving the limbs along dynamically stable trajectories. We report the creation and testing of the first neural interface that emulates this sensory-motor interaction. The interface organizes a bidirectional communication between sensory and motor areas of the brain of anaesthetized rats and an external dynamical object with programmable properties. The system includes (a) a motor interface decoding signals from a motor cortical area, and (b) a sensory interface encoding the state of the external object into electrical stimuli to a somatosensory area. The interactions between brain activities and the state of the external object generate a family of trajectories converging upon a selected equilibrium point from arbitrary starting locations. Thus, the bidirectional interface establishes the possibility to specify not only a particular movement trajectory but an entire family of motions, which includes the prescribed reactions to unexpected perturbations. PMID

  15. Eph receptors and ephrins in cancer: bidirectional signaling and beyond

    PubMed Central

    Pasquale, Elena B.

    2010-01-01

    The Eph receptor tyrosine kinases and their ephrin ligands have intriguing expression patterns in cancer cells and tumor blood vessels, which suggest important roles for their bidirectional signals in multiple aspects of cancer development and progression. Eph gene mutations likely also contribute to cancer pathogenesis. Eph receptors and ephrins have been shown to affect the growth and migration/invasion of cancer cells in culture as well as tumor growth, invasiveness, angiogenesis, and metastasis in vivo. However, Eph signaling activities in cancer appear to be complex, and are characterized by puzzling dichotomies. The Eph receptors nevertheless represent promising new therapeutic targets in cancer. PMID:20179713

  16. Bi-Directional DC-DC Converter for PHEV Applications

    SciTech Connect

    Abas Goodarzi

    2011-01-31

    Plug-In Hybrid Electric Vehicles (PHEV) require high power density energy storage system (ESS) for hybrid operation and high energy density ESS for Electric Vehicle (EV) mode range. However, ESS technologies to maximize power density and energy density simultaneously are not commercially feasible. The use of bi-directional DC-DC converter allows use of multiple energy storage, and the flexible DC-link voltages can enhance the system efficiency and reduce component sizing. This will improve fuel consumption, increase the EV mode range, reduce the total weight, reduce battery initial and life cycle cost, and provide flexibility in system design.

  17. Experimental investigation of the deformable mirror with bidirectional thermal actuators.

    PubMed

    Huang, Lei; Ma, Xingkun; Gong, Mali; Bian, Qi

    2015-06-29

    A deformable mirror with actuators of thermoelectric coolers (TECs) is introduced in this paper. Due to the bidirectional thermal actuation property of the TEC, both upward and downward surface control is available for the DM. The response functions of the actuators are investigated. A close-loop wavefront control experiment is performed too, where the defocus and the astigmatism were corrected. The results reveal that there is a promising prospect for the novel design to be used in corrections of static aberrations, such as in the Inertial Confinement Fusion (ICF).

  18. Bi-directional evolutionary level set method for topology optimization

    NASA Astrophysics Data System (ADS)

    Zhu, Benliang; Zhang, Xianmin; Fatikow, Sergej; Wang, Nianfeng

    2015-03-01

    A bi-directional evolutionary level set method for solving topology optimization problems is presented in this article. The proposed method has three main advantages over the standard level set method. First, new holes can be automatically generated in the design domain during the optimization process. Second, the dependency of the obtained optimized configurations upon the initial configurations is eliminated. Optimized configurations can be obtained even being started from a minimum possible initial guess. Third, the method can be easily implemented and is computationally more efficient. The validity of the proposed method is tested on the mean compliance minimization problem and the compliant mechanisms topology optimization problem.

  19. Shinnery oak bidirectional reflectance properties and canopy model inversion

    NASA Technical Reports Server (NTRS)

    Deering, Donald W.; Eck, Thomas F.; Grier, Toby

    1992-01-01

    Field measurements are presented, together with the results of a 3D canopy-model inversion for sand shinnery oak community in western Texas. The spectral bidirectional radiance measurements were in three spectral channels encompassing both the complete land surface and sky hemispheres. The changes in canopy reflectance that occur with variations in solar zenith angle and view direction for two seasons of the year were evaluated, and the 3D radiation-interaction model was inverted to estimate the oak leaf area index and canopy density from the reflectance data.

  20. Symmetric reconfigurable capacity assignment in a bidirectional DWDM access network.

    PubMed

    Ortega, Beatriz; Mora, José; Puerto, Gustavo; Capmany, José

    2007-12-10

    This paper presents a novel architecture for DWDM bidirectional access networks providing symmetric dynamic capacity allocation for both downlink and uplink signals. A foldback arrayed waveguide grating incorporating an optical switch enables the experimental demonstration of flexible assignment of multiservice capacity. Different analog and digital services, such as CATV, 10 GHz-tone, 155Mb/s PRBS and UMTS signals have been transmitted in order to successfully test the system performance under different scenarios of total capacity distribution from the Central Station to different Base Stations with two reconfigurable extra channels for each down and upstream direction.

  1. Microassembly based on hands free origami with bidirectional curvature

    PubMed Central

    Bassik, Noy; Stern, George M.; Gracias, David H.

    2009-01-01

    Microassembly based on origami, the Japanese art of paper folding, presents an attractive methodology for constructing complex three-dimensional (3D) devices and advanced materials. A variety of functional structures have been created using patterned metallic, semiconducting, and polymeric thin films, but have been limited to those that curve in a single direction. We report a design framework that can be used to achieve spontaneous bidirectional folds with any desired angle, and we demonstrate theoretical and experimental realizations of complex 3D structures with +90°, −90°, +180°, and −180° folds. The strategy is parallel, versatile, and compatible with conventional microfabrication. PMID:19787072

  2. ARRANGEMENT FOR REPLACING FILTERS

    DOEpatents

    Blomgren, R.A.; Bohlin, N.J.C.

    1957-08-27

    An improved filtered air exhaust system which may be continually operated during the replacement of the filters without the escape of unfiltered air is described. This is accomplished by hermetically sealing the box like filter containers in a rectangular tunnel with neoprene covered sponge rubber sealing rings coated with a silicone impregnated pneumatic grease. The tunnel through which the filters are pushed is normal to the exhaust air duct. A number of unused filters are in line behind the filters in use, and are moved by a hydraulic ram so that a fresh filter is positioned in the air duct. The used filter is pushed into a waiting receptacle and is suitably disposed. This device permits a rapid and safe replacement of a radiation contaminated filter without interruption to the normal flow of exhaust air.

  3. Method of securing filter elements

    SciTech Connect

    Brown, Erik P.; Haslam, Jeffery L.; Mitchell, Mark A.

    2016-10-04

    A filter securing system including a filter unit body housing; at least one tubular filter element positioned in the filter unit body housing, the tubular filter element having a closed top and an open bottom; a dimple in either the filter unit body housing or the top of the tubular filter element; and a socket in either the filter unit body housing or the top of the tubular filter element that receives the dimple in either the filter unit body housing or the top of the tubular filter element to secure the tubular filter element to the filter unit body housing.

  4. Rigid porous filter

    DOEpatents

    Chiang, Ta-Kuan; Straub, Douglas L.; Dennis, Richard A.

    2000-01-01

    The present invention involves a porous rigid filter including a plurality of concentric filtration elements having internal flow passages and forming external flow passages there between. The present invention also involves a pressure vessel containing the filter for the removal of particulates from high pressure particulate containing gases, and further involves a method for using the filter to remove such particulates. The present filter has the advantage of requiring fewer filter elements due to the high surface area-to-volume ratio provided by the filter, requires a reduced pressure vessel size, and exhibits enhanced mechanical design properties, improved cleaning properties, configuration options, modularity and ease of fabrication.

  5. Filter type gas sampler with filter consolidation

    DOEpatents

    Miley, Harry S.; Thompson, Robert C.; Hubbard, Charles W.; Perkins, Richard W.

    1997-01-01

    Disclosed is an apparatus for automatically consolidating a filter or, more specifically, an apparatus for drawing a volume of gas through a plurality of sections of a filter, whereafter the sections are subsequently combined for the purpose of simultaneously interrogating the sections to detect the presence of a contaminant.

  6. Filter type gas sampler with filter consolidation

    DOEpatents

    Miley, H.S.; Thompson, R.C.; Hubbard, C.W.; Perkins, R.W.

    1997-03-25

    Disclosed is an apparatus for automatically consolidating a filter or, more specifically, an apparatus for drawing a volume of gas through a plurality of sections of a filter, where after the sections are subsequently combined for the purpose of simultaneously interrogating the sections to detect the presence of a contaminant. 5 figs.

  7. Generalized Hampel Filters

    NASA Astrophysics Data System (ADS)

    Pearson, Ronald K.; Neuvo, Yrjö; Astola, Jaakko; Gabbouj, Moncef

    2016-12-01

    The standard median filter based on a symmetric moving window has only one tuning parameter: the window width. Despite this limitation, this filter has proven extremely useful and has motivated a number of extensions: weighted median filters, recursive median filters, and various cascade structures. The Hampel filter is a member of the class of decsion filters that replaces the central value in the data window with the median if it lies far enough from the median to be deemed an outlier. This filter depends on both the window width and an additional tuning parameter t, reducing to the median filter when t=0, so it may be regarded as another median filter extension. This paper adopts this view, defining and exploring the class of generalized Hampel filters obtained by applying the median filter extensions listed above: weighted Hampel filters, recursive Hampel filters, and their cascades. An important concept introduced here is that of an implosion sequence, a signal for which generalized Hampel filter performance is independent of the threshold parameter t. These sequences are important because the added flexibility of the generalized Hampel filters offers no practical advantage for implosion sequences. Partial characterization results are presented for these sequences, as are useful relationships between root sequences for generalized Hampel filters and their median-based counterparts. To illustrate the performance of this filter class, two examples are considered: one is simulation-based, providing a basis for quantitative evaluation of signal recovery performance as a function of t, while the other is a sequence of monthly Italian industrial production index values that exhibits glaring outliers.

  8. Nonlinear image registration with bidirectional metric and reciprocal regularization

    PubMed Central

    Ying, Shihui; Li, Dan; Xiao, Bin; Peng, Yaxin; Du, Shaoyi; Xu, Meifeng

    2017-01-01

    Nonlinear registration is an important technique to align two different images and widely applied in medical image analysis. In this paper, we develop a novel nonlinear registration framework based on the diffeomorphic demons, where a reciprocal regularizer is introduced to assume that the deformation between two images is an exact diffeomorphism. In detail, first, we adopt a bidirectional metric to improve the symmetry of the energy functional, whose variables are two reciprocal deformations. Secondly, we slack these two deformations into two independent variables and introduce a reciprocal regularizer to assure the deformations being the exact diffeomorphism. Then, we utilize an alternating iterative strategy to decouple the model into two minimizing subproblems, where a new closed form for the approximate velocity of deformation is calculated. Finally, we compare our proposed algorithm on two data sets of real brain MR images with two relative and conventional methods. The results validate that our proposed method improves accuracy and robustness of registration, as well as the gained bidirectional deformations are actually reciprocal. PMID:28231342

  9. Standing wave bi-directional linearly moving ultrasonic motor.

    PubMed

    He, S; Chen, W; Tao, X; Chen, Z

    1998-01-01

    A standing wave bi-directional linearly moving ultrasonic motor has been studied for the purpose of implementing a practical linear ultrasonic motor with simple structure, simple driving and high resolution. The fundamental principle of this linear motor is projections on the right sides of a standing wave crests generating thrust force right-diagonally on the slider pressed against the projections. Correspondingly, projections on the left sides of the wave crests make the slider move toward the left. In order to realize bi-directional actuating, vibration mode B3 or B4 is excited in a rectangular plate-type vibrator to make the projections on the right sides or the left sides of the wave crests. In this paper, the operation principle of the linear motor is demonstrated. Furthermore, a prototype linear ultrasonic motor of 40 mm in length, 10 mm in width is fabricated and investigated. The following performances have been achieved: maximum speed 200 mm/s, maximum force output 150 gf, and resolution less than 0.1 microm.

  10. Bidirectional Relations between Temperament and Parenting Styles in Chinese Children

    PubMed Central

    Lee, Erica H.; Zhou, Qing; Eisenberg, Nancy; Wang, Yun

    2012-01-01

    The present study examined bidirectional relations between child temperament and parenting styles in a sample (n = 425) of Chinese children during elementary school period (age range = 6 to 9 years at Wave 1). Using two waves (3.8 years apart) of longitudinal data, we tested two hypotheses: (1) whether child temperament (effortful control and anger/frustration) at Wave 1 predicts parenting styles (authoritative and authoritarian parenting) at Wave 2, controlling for Wave 1 parenting; and (2) whether parenting styles at Wave 1 predict Wave 2 temperament, controlling for Wave 1 temperament. We found support for bidirectional relations between temperament and authoritarian parenting, such that higher effortful control and lower anger/frustration were associated with higher authoritarian parenting across time and in both directions. There were no significant cross-time associations between children’s temperament and authoritative parenting. These findings extend the previous tests of transactional relations between child temperament and parenting in Chinese children and are consistent with the cultural values toward effortful control and control of anger/frustration in Chinese society. PMID:23482684

  11. Optimization of the assisted bidirectional Glenn for single ventricle palliation

    NASA Astrophysics Data System (ADS)

    Marsden, Alison; Shang, Jessica; Esmaily-Moghadam, Mahdi; Figliola, Richard; Reinhartz, Olaf; Hsia, Tain-Yen

    2015-11-01

    For neonates with single ventricle physiology, a systemic-pulmonary shunt (e.g., a modified Blalock-Taussig shunt (mBTS)) is typically employed as an early-stage procedure in preparation for a later-stage bidirectional Glenn (BDG). Mortality rates with the mBTS are high, yet the BDG has poorer outcomes in neonates. The assisted bidirectional Glenn (ABG) augments the inadequate pulmonary flow associated with early BDG implementation in neonates through an additional shunt between the innominate artery and the superior vena cava (SVC). The shunt uses a nozzle to inject high-velocity flow to the SVC, elevating downstream pulmonary pressure. Previous simulations and animal studies verified feasibility and higher pulmonary flow rates. In numerical simulations, we explore shunt geometries and placements implanted into a 3D model of the aorta and pulmonary arteries, coupled with a lumped parameter network describing the remaining circulatory system. We seek an ABG shunt that optimizes hemodynamic variables such as pulmonary flow rate and oxygenation and constrains SVC pressure. The optimized ABG will be evaluated against the mBTS and the BDG in simulations and experiments. A successful implementation of the ABG would replace the mBTS and BDG procedures and reduce mortality rates. Burroughs Wellcome Fund, Leducq Foundation.

  12. Patient-specific modeling of the Assisted Bidirectional Glenn (ABG)

    NASA Astrophysics Data System (ADS)

    Shang, Jessica; Esmaily-Moghadam, Mahdi; Figliola, Richard; Hsia, Tain-Yen; Marsden, Alison

    2016-11-01

    The Assisted Bidirectional Glenn (ABG) is proposed as an early-stage palliative procedure for single ventricle neonates. The ABG augments the pulmonary flow of the Bidirectional Glenn (BDG) with a secondary high-velocity flow through a nozzle-like shunt between the innominate artery and the superior vena cava (SVC). The ABG would provide a superior cavopulmonary connection than the systemic-pulmonary shunt that is typically employed as a stage-I procedure (e.g., a modified Blalock-Taussig shunt) and would address the low pulmonary flow associated with the BDG. Following simulations in vitro and in silico that show the ABG successfully increased pulmonary flows in idealized models, we implemented the ABG in several patient-specific models coupled to a lumped parameter network tuned to clinical values for each patient. The ABG performed similarly across different patients; compared to the BDG, the pulmonary flow increased 20% with a similar increase in the SVC pressure. The performance of the ABG was the most sensitive to nozzle outlet area, compared to nozzle inlet area and location of the shunt anastomosis. The study verified that the ABG benefits a range of patients and identified key parameters for further optimization of the ABG. Stanford Cardiovascular Institute NIH T32.

  13. Bidirectional converter for high-efficiency fuel cell powertrain

    NASA Astrophysics Data System (ADS)

    Fardoun, Abbas A.; Ismail, Esam H.; Sabzali, Ahmad J.; Al-Saffar, Mustafa A.

    2014-03-01

    In this paper, a new wide conversion ratio step-up and step-down converter is presented. The proposed converter is derived from the conventional Single Ended Primary Inductor Converter (SEPIC) topology and it is integrated with a capacitor-diode voltage multiplier, which offers a simple structure, reduced electromagnetic interference (EMI), and reduced semiconductors' voltage stresses. Other advantages include: continuous input and output current, extended step-up and step-down voltage conversion ratio without extreme low or high duty-cycle, simple control circuitry, and near-zero input and output ripple currents compared to other converter topologies. The low charging/discharging current ripple and wide gain features result in a longer life-span and lower cost of the energy storage battery system. In addition, the "near-zero" ripple capability improves the fuel cell durability. Theoretical analysis results obtained with the proposed structure are compared with other bi-direction converter topologies. Simulation and experimental results are presented to verify the performance of the proposed bi-directional converter.

  14. Bidirectional Gender Face Aftereffects: Evidence Against Normative Facial Coding.

    PubMed

    Cronin, Sophie L; Spence, Morgan L; Miller, Paul A; Arnold, Derek H

    2017-02-01

    Facial appearance can be altered, not just by restyling but also by sensory processes. Exposure to a female face can, for instance, make subsequent faces look more masculine than they would otherwise. Two explanations exist. According to one, exposure to a female face renormalizes face perception, making that female and all other faces look more masculine as a consequence-a unidirectional effect. According to that explanation, exposure to a male face would have the opposite unidirectional effect. Another suggestion is that face gender is subject to contrastive aftereffects. These should make some faces look more masculine than the adaptor and other faces more feminine-a bidirectional effect. Here, we show that face gender aftereffects are bidirectional, as predicted by the latter hypothesis. Images of real faces rated as more and less masculine than adaptors at baseline tended to look even more and less masculine than adaptors post adaptation. This suggests that, rather than mental representations of all faces being recalibrated to better reflect the prevailing statistics of the environment, mental operations exaggerate differences between successive faces, and this can impact facial gender perception.

  15. Design of a smart bidirectional actuator for space operation

    NASA Astrophysics Data System (ADS)

    Saggin, Bortolino; Scaccabarozzi, Diego; Tarbini, Marco; Magni, Marianna; Biffi, Carlo Alberto; Tuissi, Ausonio

    2017-03-01

    A common need for space borne instruments, satellites and planetary exploration payloads is the usage of compact, light and low power actuators. In the recent years, this need has been partially solved by the development of customized solutions with an increasing usage of smart materials. A linear bidirectional actuator based on shape memory alloy technology is presented in this work. The device has been conceived to lock the double-pendulum scanning mechanism of a miniaturized Fourier transform spectrometer for planetary observation. The mechanism class is that of pin pullers, with the pin locking the movable components of the spectrometer during launch and landing phases. The proposed mechanism, differently from available off-the-shelf devices, allows multiple actuations without the need of manual resetting. Moreover, the device requires to be powered only to change its status. An appealing feature of the adopted concept is that the actuation is intrinsically shock-less, a key requirement for deployment of devices sensitive to mechanical vibration and shocks. All these characteristics, in addition to the design flexibility of the proposed concept in terms of achievable forces and strokes, make the designed actuator promising for many different applications, from space to ground. The designed bidirectional actuator provides 0.6 mm stroke and a 50 N preload but it represents just an example of implementation for the proposed concept. Structural design of the functional elastic components and SMA alloy characterization have guided the actuator development. A mockup of the actuator has been manufactured and the predicted performances preliminary validated.

  16. Nonlinear image registration with bidirectional metric and reciprocal regularization.

    PubMed

    Ying, Shihui; Li, Dan; Xiao, Bin; Peng, Yaxin; Du, Shaoyi; Xu, Meifeng

    2017-01-01

    Nonlinear registration is an important technique to align two different images and widely applied in medical image analysis. In this paper, we develop a novel nonlinear registration framework based on the diffeomorphic demons, where a reciprocal regularizer is introduced to assume that the deformation between two images is an exact diffeomorphism. In detail, first, we adopt a bidirectional metric to improve the symmetry of the energy functional, whose variables are two reciprocal deformations. Secondly, we slack these two deformations into two independent variables and introduce a reciprocal regularizer to assure the deformations being the exact diffeomorphism. Then, we utilize an alternating iterative strategy to decouple the model into two minimizing subproblems, where a new closed form for the approximate velocity of deformation is calculated. Finally, we compare our proposed algorithm on two data sets of real brain MR images with two relative and conventional methods. The results validate that our proposed method improves accuracy and robustness of registration, as well as the gained bidirectional deformations are actually reciprocal.

  17. Bidirectional Relations between Temperament and Parenting Styles in Chinese Children.

    PubMed

    Lee, Erica H; Zhou, Qing; Eisenberg, Nancy; Wang, Yun

    2013-01-01

    The present study examined bidirectional relations between child temperament and parenting styles in a sample (n = 425) of Chinese children during elementary school period (age range = 6 to 9 years at Wave 1). Using two waves (3.8 years apart) of longitudinal data, we tested two hypotheses: (1) whether child temperament (effortful control and anger/frustration) at Wave 1 predicts parenting styles (authoritative and authoritarian parenting) at Wave 2, controlling for Wave 1 parenting; and (2) whether parenting styles at Wave 1 predict Wave 2 temperament, controlling for Wave 1 temperament. We found support for bidirectional relations between temperament and authoritarian parenting, such that higher effortful control and lower anger/frustration were associated with higher authoritarian parenting across time and in both directions. There were no significant cross-time associations between children's temperament and authoritative parenting. These findings extend the previous tests of transactional relations between child temperament and parenting in Chinese children and are consistent with the cultural values toward effortful control and control of anger/frustration in Chinese society.

  18. An improved multidimensional MPA procedure for bidirectional earthquake excitations.

    PubMed

    Wang, Feng; Sun, Jian-Gang; Zhang, Ning

    2014-01-01

    Presently, the modal pushover analysis procedure is extended to multidimensional analysis of structures subjected to multidimensional earthquake excitations. an improved multidimensional modal pushover analysis (IMMPA) method is presented in the paper in order to estimate the response demands of structures subjected to bidirectional earthquake excitations, in which the unidirectional earthquake excitation applied on equivalent SDOF system is replaced by the direct superposition of two components earthquake excitations, and independent analysis in each direction is not required and the application of simplified superposition formulas is avoided. The strength reduction factor spectra based on superposition of earthquake excitations are discussed and compared with the traditional strength reduction factor spectra. The step-by-step procedure is proposed to estimate seismic demands of structures. Two examples are implemented to verify the accuracy of the method, and the results of the examples show that (1) the IMMPA method can be used to estimate the responses of structure subjected to bidirectional earthquake excitations. (2) Along with increase of peak of earthquake acceleration, structural response deviation estimated with the IMMPA method may also increase. (3) Along with increase of the number of total floors of structures, structural response deviation estimated with the IMMPA method may also increase.

  19. Novel transmissive-reflective star coupler for bidirectional WDM networks

    NASA Astrophysics Data System (ADS)

    Gan, Chaoqin; Zhang, Mingde; Sun, Xiaohan

    2001-10-01

    In this paper, a novel transmissive-reflective star coupler is proposed for expanding the scale of bidirectional WDM star networks. By combining appropriately the symmetrical transmissive property of conventional N+N passive star coupler with the reflective property of the reflective link, the transmissive-reflective star coupler is carried out. This coupler both reserves the advantages of the conventional reflective N-star coupler and overcomes its shortcomings to make the number of ports connected with nodes in the coupler be up to four times as many as that in the reflective N-star coupler. Besides, not only the bidirectional WDM star network constructed with the coupler has great flexibility of networking, but also its network scale can be expanded conveniently and smoothly on line. So, this WDM network can better satisfy the requirements of communication services at present and in future. At first, the structure of this transmissive-reflective star coupler is introduced. Next, its features are analyzed. Moreover, the required distribution ratios of power splitters in this star coupler are computed. Furthermore, the required gains and output power of optical amplifiers in this star coupler is referred. Finally, a conclusion about the star coupler is given.

  20. An Improved Multidimensional MPA Procedure for Bidirectional Earthquake Excitations

    PubMed Central

    Wang, Feng; Sun, Jian-Gang; Zhang, Ning

    2014-01-01

    Presently, the modal pushover analysis procedure is extended to multidimensional analysis of structures subjected to multidimensional earthquake excitations. an improved multidimensional modal pushover analysis (IMMPA) method is presented in the paper in order to estimate the response demands of structures subjected to bidirectional earthquake excitations, in which the unidirectional earthquake excitation applied on equivalent SDOF system is replaced by the direct superposition of two components earthquake excitations, and independent analysis in each direction is not required and the application of simplified superposition formulas is avoided. The strength reduction factor spectra based on superposition of earthquake excitations are discussed and compared with the traditional strength reduction factor spectra. The step-by-step procedure is proposed to estimate seismic demands of structures. Two examples are implemented to verify the accuracy of the method, and the results of the examples show that (1) the IMMPA method can be used to estimate the responses of structure subjected to bidirectional earthquake excitations. (2) Along with increase of peak of earthquake acceleration, structural response deviation estimated with the IMMPA method may also increase. (3) Along with increase of the number of total floors of structures, structural response deviation estimated with the IMMPA method may also increase. PMID:25140333

  1. The Bidirectional Relationship between Sleep and Immunity against Infections

    PubMed Central

    Ibarra-Coronado, Elizabeth G.; Pantaleón-Martínez, Ana Ma.; Velazquéz-Moctezuma, Javier; Prospéro-García, Oscar; Méndez-Díaz, Mónica; Pérez-Tapia, Mayra; Pavón, Lenin; Morales-Montor, Jorge

    2015-01-01

    Sleep is considered an important modulator of the immune response. Thus, a lack of sleep can weaken immunity, increasing organism susceptibility to infection. For instance, shorter sleep durations are associated with a rise in suffering from the common cold. The function of sleep in altering immune responses must be determined to understand how sleep deprivation increases the susceptibility to viral, bacterial, and parasitic infections. There are several explanations for greater susceptibility to infections after reduced sleep, such as impaired mitogenic proliferation of lymphocytes, decreased HLA-DR expression, the upregulation of CD14+, and variations in CD4+ and CD8+ T lymphocytes, which have been observed during partial sleep deprivation. Also, steroid hormones, in addition to regulating sexual behavior, influence sleep. Thus, we hypothesize that sleep and the immune-endocrine system have a bidirectional relationship in governing various physiological processes, including immunity to infections. This review discusses the evidence on the bidirectional effects of the immune response against viral, bacterial, and parasitic infections on sleep patterns and how the lack of sleep affects the immune response against such agents. Because sleep is essential in the maintenance of homeostasis, these situations must be adapted to elicit changes in sleep patterns and other physiological parameters during the immune response to infections to which the organism is continuously exposed. PMID:26417606

  2. Active Flow Control on Bidirectional Rotors for Tidal MHK Applications

    SciTech Connect

    Shiu, Henry; van Dam, Cornelis P.

    2013-08-22

    A marine and hydrokinetic (MHK) tidal turbine extracts energy from tidal currents, providing clean, sustainable electricity generation. In general, all MHK conversion technologies are confronted with significant operational hurdles, resulting in both increased capital and operations and maintenance (O&M) costs. To counter these high costs while maintaining reliability, MHK turbine designs can be simplified. Prior study found that a tidal turbine could be cost-effectively simplified by removing blade pitch and rotor/nacelle yaw. Its rotor would run in one direction during ebb and then reverse direction when the current switched to flood. We dubbed such a turbine a bidirectional rotor tidal turbine (BRTT). The bidirectional hydrofoils of a BRTT are less efficient than conventional hydrofoils and capture less energy, but the elimination of the pitch and yaw systems were estimated to reduce levelized cost of energy by 7.8%-9.6%. In this study, we investigated two mechanisms for recapturing some of the performance shortfall of the BRTT. First, we developed a novel set of hydrofoils, designated the yy series, for BRTT application. Second, we investigated the use of active flow control via microtabs. Microtabs are small deployable/retractable tabs, typically located near the leading or trailing edge of an air/hydrofoil with height on the order of the boundary layer thickness (1% - 2% of chord). They deploy approximately perpendicularly to the foil surface and, like gurney flaps and plain flaps, globally affect the aerodynamics of the airfoil. By strategically placing microtabs and selectively deploying them based on the direction of the inflow, performance of a BRTT rotor can be improved while retaining bidirectional operation. The yy foils were computationally designed and analyzed. They exhibited better performance than the baseline bidirectional foil, the ellipse. For example, the yyb07cn-180 had 14.7% higher (l/d)max than an ellipse of equal thickness. The yyb07cn

  3. Bidirectional Longitudinal Relations between Father-Child Relationships and Chinese Children's Social Competence during Early Childhood

    ERIC Educational Resources Information Center

    Zhang, Xiao

    2013-01-01

    Using a two-year and three-wave cross-lagged design with a sample of 118 Chinese preschoolers, the present study examined bidirectional longitudinal relations between father-child relationships and children's social competence. The results of structural equation modeling showed bidirectional effects between father-child conflict and social…

  4. Global evaluation of ammonia bidirectional exchange and livestock diurnal variation schemes

    EPA Science Inventory

    Bidirectional air–surface exchange of ammonia (NH3) has been neglected in many air quality models. In this study, we implement the bidirectional exchange of NH3 in the GEOS-Chem global chemical transport model. We also introduce an updated diurnal variability scheme for NH3...

  5. Counting digital filter

    NASA Technical Reports Server (NTRS)

    Zohar, S.

    1977-01-01

    Overall design of filter combines radix converter with ADC in single functional unit that directly converts analog input to its negative binary representation. Four basic elements of filter are fixed register, shift register, counter, and accumulator.

  6. Bag filters for TPP

    SciTech Connect

    L.V. Chekalov; Yu.I. Gromov; V.V. Chekalov

    2007-05-15

    Cleaning of TPP flue gases with bag filters capable of pulsed regeneration is examined. A new filtering element with a three-dimensional filtering material formed from a needle-broached cloth in which the filtration area, as compared with a conventional smooth bag, is increased by more than two times, is proposed. The design of a new FRMI type of modular filter is also proposed. A standard series of FRMI filters with a filtration area ranging from 800 to 16,000 m{sup 2} is designed for an output more than 1 million m{sub 3}/h of with respect to cleaned gas. The new bag filter permits dry collection of sulfur oxides from waste gases at TPP operating on high-sulfur coals. The design of the filter makes it possible to replace filter elements without taking the entire unit out of service.

  7. MST Filterability Tests

    SciTech Connect

    Poirier, M. R.; Burket, P. R.; Duignan, M. R.

    2015-03-12

    The Savannah River Site (SRS) is currently treating radioactive liquid waste with the Actinide Removal Process (ARP) and the Modular Caustic Side Solvent Extraction Unit (MCU). The low filter flux through the ARP has limited the rate at which radioactive liquid waste can be treated. Recent filter flux has averaged approximately 5 gallons per minute (gpm). Salt Batch 6 has had a lower processing rate and required frequent filter cleaning. Savannah River Remediation (SRR) has a desire to understand the causes of the low filter flux and to increase ARP/MCU throughput. In addition, at the time the testing started, SRR was assessing the impact of replacing the 0.1 micron filter with a 0.5 micron filter. This report describes testing of MST filterability to investigate the impact of filter pore size and MST particle size on filter flux and testing of filter enhancers to attempt to increase filter flux. The authors constructed a laboratory-scale crossflow filter apparatus with two crossflow filters operating in parallel. One filter was a 0.1 micron Mott sintered SS filter and the other was a 0.5 micron Mott sintered SS filter. The authors also constructed a dead-end filtration apparatus to conduct screening tests with potential filter aids and body feeds, referred to as filter enhancers. The original baseline for ARP was 5.6 M sodium salt solution with a free hydroxide concentration of approximately 1.7 M.3 ARP has been operating with a sodium concentration of approximately 6.4 M and a free hydroxide concentration of approximately 2.5 M. SRNL conducted tests varying the concentration of sodium and free hydroxide to determine whether those changes had a significant effect on filter flux. The feed slurries for the MST filterability tests were composed of simple salts (NaOH, NaNO2, and NaNO3) and MST (0.2 – 4.8 g/L). The feed slurry for the filter enhancer tests contained simulated salt batch 6 supernate, MST, and filter enhancers.

  8. Survey of digital filtering

    NASA Technical Reports Server (NTRS)

    Nagle, H. T., Jr.

    1972-01-01

    A three part survey is made of the state-of-the-art in digital filtering. Part one presents background material including sampled data transformations and the discrete Fourier transform. Part two, digital filter theory, gives an in-depth coverage of filter categories, transfer function synthesis, quantization and other nonlinear errors, filter structures and computer aided design. Part three presents hardware mechanization techniques. Implementations by general purpose, mini-, and special-purpose computers are presented.

  9. Radiative property investigation. [digital computer programs for determining bidirectional reflectance of spacecraft materials

    NASA Technical Reports Server (NTRS)

    Scott, R. L., Jr.

    1974-01-01

    A detailed formulation of radiative heat transfer problems involving the use of bidirectional reflectance is discussed. Except for very simple systems this formulation is very intricate. For this reason and the fact that bidirectional data are scarce, such a formulation is not in common use. However, with the development of the digital computer there have been numerical methods developed for detailed radiative investigations using the bidirectional reflectance. Since computations using bidirectional reflectance are coming into use for spacecraft radiative studies, it is necessary to have reflectance data on the materials involved. Materials that are frequently studied are coatings which are used in controlling the thermal environment of spacecrafts. This study is primarily concerned with the bidirectional reflectance of zinc oxide which is one constituent commonly used for coatings.

  10. Bidirectional Five-Level Power Processing Interface for Low Voltage Battery Energy Storage System

    NASA Astrophysics Data System (ADS)

    Huang, Jain-Yi; Jou, Hurng-Liahng; Wu, Kuen-Der; Lin, You-Si; Wu, Jinn-Chang

    A bidirectional five-level power processing interface for low voltage battery energy storage system (BESS) is developed in this paper. This BESS consists of a bidirectional five-level DC-AC converter, a bidirectional dual boost/buck DC-DC converter and a battery set. This five-level DC-AC converter includes a bidirectional full-bridge converter and a bidirectional dual buck DC-DC converter. The five-level power processing interface can charge power to the battery set form the utility or discharge the power from the battery set to the utility depending on the demanded operation of user. A hardware prototype is developed to verify the performance of this BESS. Experimental results show the performance of the developed BESS is as expected.

  11. Nonlinear Attitude Filtering Methods

    NASA Technical Reports Server (NTRS)

    Markley, F. Landis; Crassidis, John L.; Cheng, Yang

    2005-01-01

    This paper provides a survey of modern nonlinear filtering methods for attitude estimation. Early applications relied mostly on the extended Kalman filter for attitude estimation. Since these applications, several new approaches have been developed that have proven to be superior to the extended Kalman filter. Several of these approaches maintain the basic structure of the extended Kalman filter, but employ various modifications in order to provide better convergence or improve other performance characteristics. Examples of such approaches include: filter QUEST, extended QUEST, the super-iterated extended Kalman filter, the interlaced extended Kalman filter, and the second-order Kalman filter. Filters that propagate and update a discrete set of sigma points rather than using linearized equations for the mean and covariance are also reviewed. A two-step approach is discussed with a first-step state that linearizes the measurement model and an iterative second step to recover the desired attitude states. These approaches are all based on the Gaussian assumption that the probability density function is adequately specified by its mean and covariance. Other approaches that do not require this assumption are reviewed, including particle filters and a Bayesian filter based on a non-Gaussian, finite-parameter probability density function on SO(3). Finally, the predictive filter, nonlinear observers and adaptive approaches are shown. The strengths and weaknesses of the various approaches are discussed.

  12. Filtering by nonlinear systems.

    PubMed

    Campos Cantón, E; González Salas, J S; Urías, J

    2008-12-01

    Synchronization of nonlinear systems forced by external signals is formalized as the response of a nonlinear filter. Sufficient conditions for a nonlinear system to behave as a filter are given. Some examples of generalized chaos synchronization are shown to actually be special cases of nonlinear filtering.

  13. The Ribosome Filter Redux

    PubMed Central

    Mauro, Vincent P.; Edelman, Gerald M.

    2010-01-01

    The ribosome filter hypothesis postulates that ribosomes are not simply translation machines but also function as regulatory elements that differentially affect or filter the translation of particular mRNAs. On the basis of new information, we take the opportunity here to review the ribosome filter hypothesis, suggest specific mechanisms of action, and discuss recent examples from the literature that support it. PMID:17890902

  14. HEPA filter encapsulation

    DOEpatents

    Gates-Anderson, Dianne D.; Kidd, Scott D.; Bowers, John S.; Attebery, Ronald W.

    2003-01-01

    A low viscosity resin is delivered into a spent HEPA filter or other waste. The resin is introduced into the filter or other waste using a vacuum to assist in the mass transfer of the resin through the filter media or other waste.

  15. Filter service system

    DOEpatents

    Sellers, Cheryl L.; Nordyke, Daniel S.; Crandell, Richard A.; Tomlins, Gregory; Fei, Dong; Panov, Alexander; Lane, William H.; Habeger, Craig F.

    2008-12-09

    According to an exemplary embodiment of the present disclosure, a system for removing matter from a filtering device includes a gas pressurization assembly. An element of the assembly is removably attachable to a first orifice of the filtering device. The system also includes a vacuum source fluidly connected to a second orifice of the filtering device.

  16. Relative Water Content, Bidirectional Reflectance and Bidirectional Transmittance of the Interior of Detached Leaves During Dry Down.

    NASA Technical Reports Server (NTRS)

    Vanderbilt, Vern; Daughtry, Craig; Dahlgren, Robert

    2015-01-01

    Remotely sensing the water status of plants and the water content of canopies remain long-term goals of remote sensing research [1]. Estimates of canopy water content commonly involve measurements in the 900nm to 2000nm portion of the optical spectrum [1]. We have used optical polarization techniques to remove leaf surface reflection and to demonstrate that the visible light reflected by the interior of green healthy corn leaves measured in situ inversely depends upon the leaf relative water content (RWC) [2]. In the research reported here, we again used optical polarization techniques in order to remove the leaf surface reflection from our measurements. This allowed us to monitor the interiors of detached corn leaf samples during leaf dry down measuring for each sample the RWC, bidirectional spectral reflectance and bidirectional spectral transmittance over the wavelength range 450nm to 2,500nm. Our new results like our earlier results show light scattered by the leaf interior measured in the visible wavelength region generally increased as leaf RWC decreased. However, the spectral character and the much improved signal noise of our new results shows the RWC-linked visible light scattering changes are due to leaf structural changes. Our new results show that scattering changes that occur with changing leaf RWC are not attributable to molecular configuration changes in cellular pigments.

  17. Analysis of Snow Bidirectional Reflectance from ARCTAS Spring-2008 Campaign

    NASA Technical Reports Server (NTRS)

    Lyapustin, A.; Gatebe, C. K.; Redemann, J.; Kahn, R.; Brandt, R.; Russell, P.; King, M. D.; Pedersen, C. A.; Gerland, S.; Poudyal, R.; Marshak, A.; Wang, Y.; Schaaf, C.; Hall, D.; Kokhanovsky, A.

    2010-01-01

    The spring 2008 Arctic Research of the Composition of the Troposphere from Aircraft and Satellites (ARCTAS) experiment was one of major intensive field campaigns of the International Polar Year aimed at detailed characterization of atmospheric physical and chemical processes in the Arctic region. A part of this campaign was a unique snow bidirectional reflectance experiment on the NASA P-3B aircraft conducted on 7 and 15 April by the Cloud Absorption Radiometer (CAR) jointly with airborne Ames Airborne Tracking Sunphotometer (AATS) and ground-based Aerosol Robotic Network (AERONET) sunphotometers. The CAR data were atmospherically corrected to derive snow bidirectional reflectance at high 1 degree angular resolution in view zenith and azimuthal angles along with surface albedo. The derived albedo was generally in good agreement with ground albedo measurements collected on 15 April. The CAR snow bidirectional reflectance factor (BRF) was used to study the accuracy of analytical Ross-Thick Li-Sparse (RTLS), Modified Rahman-Pinty-Verstraete (MRPV) and Asymptotic Analytical Radiative Transfer (AART) BRF models. Except for the glint region (azimuthal angles phi less than 40 degrees), the best fit MRPV and RTLS models fit snow BRF to within 0.05. The plane-parallel radiative transfer (PPRT) solution was also analyzed with the models of spheres, spheroids, randomly oriented fractal crystals, and with a synthetic phase function. The latter merged the model of spheroids for the forward scattering angles with the fractal model in the backscattering direction. The PPRT solution with synthetic phase function provided the best fit to measured BRF in the full range of angles. Regardless of the snow grain shape, the PPRT model significantly over-/underestimated snow BRF in the glint/backscattering regions, respectively, which agrees with other studies. To improve agreement with experiment, we introduced a model of macroscopic snow surface roughness by averaging the PPRT solution

  18. Regenerative particulate filter development

    NASA Technical Reports Server (NTRS)

    Descamp, V. A.; Boex, M. W.; Hussey, M. W.; Larson, T. P.

    1972-01-01

    Development, design, and fabrication of a prototype filter regeneration unit for regenerating clean fluid particle filter elements by using a backflush/jet impingement technique are reported. Development tests were also conducted on a vortex particle separator designed for use in zero gravity environment. A maintainable filter was designed, fabricated and tested that allows filter element replacement without any leakage or spillage of system fluid. Also described are spacecraft fluid system design and filter maintenance techniques with respect to inflight maintenance for the space shuttle and space station.

  19. A unified Kalman filter

    NASA Astrophysics Data System (ADS)

    Stubberud, Allen R.

    2017-01-01

    When considering problems of linear sequential estimation, two versions of the Kalman filter, the continuous-time version and the discrete-time version, are often used. (A hybrid filter also exists.) In many applications in which the Kalman filter is used, the system to which the filter is applied is a linear continuous-time system, but the Kalman filter is implemented on a digital computer, a discrete-time device. The two general approaches for developing a discrete-time filter for implementation on a digital computer are: (1) approximate the continuous-time system by a discrete-time system (called discretization of the continuous-time system) and develop a filter for the discrete-time approximation; and (2) develop a continuous-time filter for the system and then discretize the continuous-time filter. Generally, the two discrete-time filters will be different, that is, it can be said that discretization and filter generation are not, in general, commutative operations. As a result, any relationship between the discrete-time and continuous-time versions of the filter for the same continuous-time system is often obfuscated. This is particularly true when an attempt is made to generate the continuous-time version of the Kalman filter through a simple limiting process (the sample period going to zero) applied to the discrete-time version. The correct result is, generally, not obtained. In a 1961 research report, Kalman showed that the continuous-time Kalman filter can be obtained from the discrete-time Kalman filter by taking limits as the sample period goes to zero if the white noise process for the continuous-time version is appropriately defined. Using this basic concept, a discrete-time Kalman filter can be developed for a continuous-time system as follows: (1) discretize the continuous-time system using Kalman's technique; and (2) develop a discrete-time Kalman filter for that discrete-time system. Kalman's results show that the discrete-time filter generated in

  20. Ceramic fiber filter technology

    SciTech Connect

    Holmes, B.L.; Janney, M.A.

    1996-06-01

    Fibrous filters have been used for centuries to protect individuals from dust, disease, smoke, and other gases or particulates. In the 1970s and 1980s ceramic filters were developed for filtration of hot exhaust gases from diesel engines. Tubular, or candle, filters have been made to remove particles from gases in pressurized fluidized-bed combustion and gasification-combined-cycle power plants. Very efficient filtration is necessary in power plants to protect the turbine blades. The limited lifespan of ceramic candle filters has been a major obstacle in their development. The present work is focused on forming fibrous ceramic filters using a papermaking technique. These filters are highly porous and therefore very lightweight. The papermaking process consists of filtering a slurry of ceramic fibers through a steel screen to form paper. Papermaking and the selection of materials will be discussed, as well as preliminary results describing the geometry of papers and relative strengths.

  1. Compact planar microwave blocking filters

    NASA Technical Reports Server (NTRS)

    U-Yen, Kongpop (Inventor); Wollack, Edward J. (Inventor)

    2012-01-01

    A compact planar microwave blocking filter includes a dielectric substrate and a plurality of filter unit elements disposed on the substrate. The filter unit elements are interconnected in a symmetrical series cascade with filter unit elements being organized in the series based on physical size. In the filter, a first filter unit element of the plurality of filter unit elements includes a low impedance open-ended line configured to reduce the shunt capacitance of the filter.

  2. Properties of Coupled Oscillator Model for Bidirectional Associative Memory

    NASA Astrophysics Data System (ADS)

    Kawaguchi, Satoshi

    2016-08-01

    In this study, we consider the stationary state and dynamical properties of a coupled oscillator model for bidirectional associative memory. For the stationary state, we apply the replica method to obtain self-consistent order parameter equations. The theoretical results for the storage capacity and overlap agree well with the numerical simulation. For the retrieval process, we apply statistical neurodynamics to include temporal noise correlations. For the successful retrieval process, the theoretical result obtained with the fourth-order approximation qualitatively agrees with the numerical simulation. However, for the unsuccessful retrieval process, higher-order noise correlations suppress severely; therefore, the maximum value of the overlap and the relaxation time are smaller than those of the numerical simulation. The reasons for the discrepancies between the theoretical result and numerical simulation, and the validity of our analysis are discussed.

  3. The start of lightning: Evidence of bidirectional lightning initiation.

    PubMed

    Montanyà, Joan; van der Velde, Oscar; Williams, Earle R

    2015-10-16

    Lightning flashes are known to initiate in regions of strong electric fields inside thunderstorms, between layers of positively and negatively charged precipitation particles. For that reason, lightning inception is typically hidden from sight of camera systems used in research. Other technology such as lightning mapping systems based on radio waves can typically detect only some aspects of the lightning initiation process and subsequent development of positive and negative leaders. We report here a serendipitous recording of bidirectional lightning initiation in virgin air under the cloud base at ~11,000 images per second, and the differences in characteristics of opposite polarity leader sections during the earliest stages of the discharge. This case reveals natural lightning initiation, propagation and a return stroke as in negative cloud-to-ground flashes, upon connection to another lightning channel - without any masking by cloud.

  4. A Kendama Learning Robot Based on Bi-directional Theory.

    PubMed

    Kawato, Mitsuo; Wada, Yasuhiro; Nakano, Eri; Osu, Rieko; Koike, Yasuharu; Gomi, Hiroaki; Gandolfo, Francesca; Schaal, Stefan; Miyamoto, Hiroyuki

    1996-11-01

    A general theory of movement-pattern perception based on bi-directional theory for sensory-motor integration can be used for motion capture and learning by watching in robotics. We demonstrate our methods using the game of Kendama, executed by the SARCOS Dextrous Slave Arm, which has a very similar kinematic structure to the human arm. Three ingredients have to be integrated for the successful execution of this task. The ingredients are (1) to extract via-points from a human movement trajectory using a forward-inverse relaxation model, (2) to treat via-points as a control variable while reconstructing the desired trajectory from all the via-points, and (3) to modify the via-points for successful execution. In order to test the validity of the via-point representation, we utilized a numerical model of the SARCOS arm, and examined the behavior of the system under several conditions. Copyright 1996 Elsevier Science Ltd.

  5. Bidirectional transmembrane signaling by cytoplasmic domain separation in integrins.

    PubMed

    Kim, Minsoo; Carman, Christopher V; Springer, Timothy A

    2003-09-19

    Although critical for development, immunity, wound healing, and metastasis, integrins represent one of the few classes of plasma membrane receptors for which the basic signaling mechanism remains a mystery. We investigated cytoplasmic conformational changes in the integrin LFA-1 (alphaLbeta2) in living cells by measuring fluorescence resonance energy transfer between cyan fluorescent protein-fused and yellow fluorescent protein-fused alphaL and beta2 cytoplasmic domains. In the resting state these domains were close to each other, but underwent significant spatial separation upon either intracellular activation of integrin adhesiveness (inside-out signaling) or ligand binding (outside-in signaling). Thus, bidirectional integrin signaling is accomplished by coupling extracellular conformational changes to an unclasping and separation of the alpha and beta cytoplasmic domains, a distinctive mechanism for transmitting information across the plasma membrane.

  6. A ray tracing model for leaf bidirectional scattering studies

    NASA Technical Reports Server (NTRS)

    Brakke, T. W.; Smith, J. A.

    1987-01-01

    A leaf is modeled as a deterministic two-dimensional structure consisting of a network of circular arcs designed to represent the internal morphology of major species. The path of an individual ray through the leaf is computed using geometric optics. At each intersection of the ray with an arc, the specular reflected and transmitted rays are calculated according to the Snell and Fresnel equations. Diffuse scattering is treated according to Lambert's law. Absorption is also permitted but requires a detailed knowledge of the spectral attenuation coefficients. An ensemble of initial rays are chosen for each incident direction with the initial intersection points on the leaf surface selected randomly. The final equilibrium state after all interactions then yields the leaf bidirectional reflectance and transmittance distributions. The model also yields the internal two dimensional light gradient profile of the leaf.

  7. Effect of heliotropism on the bidirectional reflectance of irrigated cotton

    NASA Technical Reports Server (NTRS)

    Schutt, J. B.; Kimes, D. S.; Newcomb, W. W.

    1985-01-01

    The dynamic behavior of cotton leaves is described using gyroscopic coordinates. Angular movements represented as pitching, rolling, and yawing are used to follow the movement of leaf normals and their instantaneous relationships to the sun on an individual basis. A sensitivity analysis establishes that the angle between a leaf normal and the sun is most affected by changes in pitch and roll. Plots of the phase angle gamma averaged by quadrant show the pronounced heliotropic behavior of cotton leaves. Plots of pitch versus roll averaged by quadrant demonstrate the differential behavior of cotton leaves relative to the position of the sun. These results are used to interpret sections taken from bidirectional reflectance curves obtained using 0.57-0.69 micron band in terms of the evolution of gamma from sunrise until noon. The measured and experimental values of gamma are in reasonable agreement. Forescattered and backscattered exitances are observed to have distinct leaf normal directions.

  8. Biophysical information in asymmetric and symmetric diurnal bidirectional canopy reflectance

    NASA Technical Reports Server (NTRS)

    Vanderbilt, Vern C.; Caldwell, William F.; Pettigrew, Rita E.; Ustin, Susan L.; Martens, Scott N.; Rousseau, Robert A.; Berger, Kevin M.; Ganapol, B. D.; Kasischke, Eric S.; Clark, Jenny A.

    1991-01-01

    The authors present a theory for partitioning the information content in diurnal bidirectional reflectance measurements in order to detect differences potentially related to biophysical variables. The theory, which divides the canopy reflectance into asymmetric and symmetric functions of solar azimuth angle, attributes asymmetric variation to diurnal changes in the canopy biphysical properties. The symmetric function is attributed to the effects of sunlight interacting with a hypothetical average canopy which would display the average diurnal properties of the actual canopy. The authors analyzed radiometer data collected diurnally in the Thematic Mapper wavelength bands from two walnut canopies that received differing irrigation treatments. The reflectance of the canopies varied with sun and view angles and across seven bands in the visible, near-infrared, and middle infrared wavelength regions. Although one of the canopies was permanently water stressed and the other was stressed in mid-afternoon each day, no water stress signature was unambiguously evident in the reflectance data.

  9. Dove prism based rotating dual beam bidirectional Doppler OCT

    PubMed Central

    Blatter, Cedric; Coquoz, Séverine; Grajciar, Branislav; Singh, Amardeep S. G.; Bonesi, Marco; Werkmeister, René M.; Schmetterer, Leopold; Leitgeb, Rainer A.

    2013-01-01

    Traditional Doppler OCT is highly sensitive to motion artifacts due to the dependence on the Doppler angle. This limits its accuracy in clinical practice. To overcome this limitation, we use a bidirectional dual beam technique equipped with a novel rotating scanning scheme employing a Dove prism. The volume is probed from two distinct illumination directions with variable controlled incidence plane, allowing for reconstruction of the true flow velocity at arbitrary vessel orientations. The principle is implemented with Swept Source OCT at 1060nm with 100,000 A-Scans/s. We apply the system to resolve pulsatile retinal absolute blood velocity by performing segment scans around the optic nerve head and circumpapillary scan time series. PMID:23847742

  10. All-fiber bidirectional optical parametric oscillator for precision sensing.

    PubMed

    Gowda, R; Nguyen, N; Diels, J-C; Norwood, R A; Peyghambarian, N; Kieu, K

    2015-05-01

    We present the design and operation of an all-fiber, synchronously pumped, bidirectional optical parametric oscillator (OPO) for precision sensing applications. The fiber-based OPO (FOPO) generates two frequency combs with identical repetition rates but different carrier offset frequencies. A narrow beatnote was observed with full-width at half-maximum (FWHM) linewidth of <10  Hz when the two frequency combs were overlapped on a photodetector. The all-fiber design removes the need for free-space alignment and adjustment. In addition, an external delay line to overlap the two pulse trains in time on the detector is not needed since our unique design provides automatic delay compensation. We expect the novel FOPO to find important applications in precision measurements including rotation sensing with ultra-large sensing area and sensitivity.

  11. A physical model for predicting bidirectional reflectances over bare soil

    NASA Technical Reports Server (NTRS)

    Pinty, Bernard; Verstraete, Michel M.; Dickinson, Robert E.

    1989-01-01

    While most previous attempts to retrieve soil surface optical property characteristics have proceeded through a fitting of empirical functions to the data, an optimization technique is presently applied to a physically-based surface reflectance model developed for the study of planetary surfaces. This inversion procedure is shown to allow the direct estimation of the single-scattering coefficient, two parameters describing the 'hot spot' phenomenon, and two parameters describing the scattering phase function. A comparison of inversion technique results with both synthetic data and actual observations shows the model to be capable of predicting the observed bidirectional reflectances as well as directional-hemispherical reflectances; it can also build the complete radiance field over the upward hemisphere.

  12. Convective Flow of Sisko Fluid over a Bidirectional Stretching Surface

    PubMed Central

    Munir, Asif; Shahzad, Azeem; Khan, Masood

    2015-01-01

    The present investigation focuses the flow and heat transfer characteristics of the steady three-dimensional Sisko fluid driven by a bidirectional stretching sheet. The modeled partial differential equations are reduced to coupled ordinary differential equations by a suitable transformation. The resulting equations are solved numerically by the shooting method using adaptive Runge Kutta algorithm in combination with Newton's method in the domain [0,∞). The numerical results for the velocity and temperature fields are graphically presented and effects of the relevant parameters are discussed in detail. Moreover, the skin-friction coefficient and local Nusselt number for different values of the power-law index and stretching ratio parameter are presented through tabulated data. The numerical results are also verified with the results obtained analytically by the homotopy analysis method (HAM). Additionally, the results are validated with previously published pertinent literature as a limiting case of the problem. PMID:26110873

  13. Convective Flow of Sisko Fluid over a Bidirectional Stretching Surface.

    PubMed

    Munir, Asif; Shahzad, Azeem; Khan, Masood

    2015-01-01

    The present investigation focuses the flow and heat transfer characteristics of the steady three-dimensional Sisko fluid driven by a bidirectional stretching sheet. The modeled partial differential equations are reduced to coupled ordinary differential equations by a suitable transformation. The resulting equations are solved numerically by the shooting method using adaptive Runge Kutta algorithm in combination with Newton's method in the domain [0,∞). The numerical results for the velocity and temperature fields are graphically presented and effects of the relevant parameters are discussed in detail. Moreover, the skin-friction coefficient and local Nusselt number for different values of the power-law index and stretching ratio parameter are presented through tabulated data. The numerical results are also verified with the results obtained analytically by the homotopy analysis method (HAM). Additionally, the results are validated with previously published pertinent literature as a limiting case of the problem.

  14. SNP genotyping using single-tube fluorescent bidirectional PCR.

    PubMed

    Waterfall, Christy M; Cobb, Benjamin D

    2002-07-01

    SNP genotyping is a well-populatedfield with a large number of assay formats offering accurate allelic discrimination. However, there remains a discord between the ultimate goal of rapid, inexpensive assays that do not require complex design considerations and involved optimization strategies. We describe the first integration of bidirectional allele-specific amplification, SYBR Green I, and rapid-cycle PCR to provide a homogeneous SNP-typing assay. Wild-type, mutant, and heterozygous alleles were easily discriminated in a single tube using melt curve profiling of PCR products alone. We demonstrate the effectiveness and reliability of this assay with a blinded trial using clinical samples from individuals with sickle cell anemia, sickle cell trait, or unaffected individuals. The tests were completed in less than 30 min without expensive fluorogenic probes, prohibiting design rules, or lengthy downstream processing for product analysis.

  15. Bi-directional electrical characterisation of microbial fuel cell.

    PubMed

    Degrenne, N; Ledezma, P; Bevilacqua, P; Buret, F; Allard, B; Greenman, J; Ieropoulos, I A

    2013-01-01

    The electrical performance of microbial fuel cells in steady-state is usually investigated by standard characterisation methods that reveal many important parameters e.g. maximum power. This paper introduces a novel "bi-directional" method to study how the acquisition parameters (i.e. sweep rate and sweep regime) can influence measurements and consequently performance estimations. The investigation exhibited considerable differences (hysteresis) between the forward and backward characterisation regimes, indicating a difficulty to reach steady-state under certain conditions. Moreover, it is found that fast sweep rates (time-step of 2 min) can lead to an overestimation of the short-circuit currents, while prolonged operation with high external loads leads to maximum power overestimation and extended conditioning at high currents can result in its underestimation.

  16. Bidirectional elastic image registration using B-spline affine transformation.

    PubMed

    Gu, Suicheng; Meng, Xin; Sciurba, Frank C; Ma, Hongxia; Leader, Joseph; Kaminski, Naftali; Gur, David; Pu, Jiantao

    2014-06-01

    A registration scheme termed as B-spline affine transformation (BSAT) is presented in this study to elastically align two images. We define an affine transformation instead of the traditional translation at each control point. Mathematically, BSAT is a generalized form of the affine transformation and the traditional B-spline transformation (BST). In order to improve the performance of the iterative closest point (ICP) method in registering two homologous shapes but with large deformation, a bidirectional instead of the traditional unidirectional objective/cost function is proposed. In implementation, the objective function is formulated as a sparse linear equation problem, and a sub-division strategy is used to achieve a reasonable efficiency in registration. The performance of the developed scheme was assessed using both two-dimensional (2D) synthesized dataset and three-dimensional (3D) volumetric computed tomography (CT) data. Our experiments showed that the proposed B-spline affine model could obtain reasonable registration accuracy.

  17. Study on bi-directional pedestrian movement using ant algorithms

    NASA Astrophysics Data System (ADS)

    Sibel, Gokce; Ozhan, Kayacan

    2016-01-01

    A cellular automata model is proposed to simulate bi-directional pedestrian flow. Pedestrian movement is investigated by using ant algorithms. Ants communicate with each other by dropping a chemical, called a pheromone, on the substrate while crawling forward. Similarly, it is considered that oppositely moving pedestrians drop ‘visual pheromones’ on their way and the visual pheromones might cause attractive or repulsive interactions. This pheromenon is introduced into modelling the pedestrians’ walking preference. In this way, the decision-making process of pedestrians will be based on ‘the instinct of following’. At some densities, the relationships of velocity-density and flux-density are analyzed for different evaporation rates of visual pheromones. Lane formation and phase transition are observed for certain evaporation rates of visual pheromones.

  18. Bidirectional Elastic Image Registration Using B-Spline Affine Transformation

    PubMed Central

    Gu, Suicheng; Meng, Xin; Sciurba, Frank C.; Wang, Chen; Kaminski, Naftali; Pu, Jiantao

    2014-01-01

    A registration scheme termed as B-spline affine transformation (BSAT) is presented in this study to elastically align two images. We define an affine transformation instead of the traditional translation at each control point. Mathematically, BSAT is a generalized form of the affine transformation and the traditional B-Spline transformation (BST). In order to improve the performance of the iterative closest point (ICP) method in registering two homologous shapes but with large deformation, a bi-directional instead of the traditional unidirectional objective / cost function is proposed. In implementation, the objective function is formulated as a sparse linear equation problem, and a sub-division strategy is used to achieve a reasonable efficiency in registration. The performance of the developed scheme was assessed using both two-dimensional (2D) synthesized dataset and three-dimensional (3D) volumetric computed tomography (CT) data. Our experiments showed that the proposed B-spline affine model could obtain reasonable registration accuracy. PMID:24530210

  19. Cross-modal, bidirectional priming in grapheme-color synesthesia.

    PubMed

    Paffen, Chris L E; Van der Smagt, Maarten J; Nijboer, Tanja C W

    2015-05-01

    Grapheme-color synesthetes perceive achromatic graphemes to be inherently colored. In this study grapheme-color synesthetes and non-synesthetes discriminated (1) the color of visual targets presented along with aurally presented digit primes, and (2) the identity of aurally presented digit targets presented with visual color primes. Reaction times to visual color targets were longer when the color of the target was incongruent with the synesthetic percept reported for the prime. Likewise, discriminating aurally presented digit targets took longer when the color of the prime was incongruent with the synesthetic percept for the target. These priming effects were absent in non-synesthetes. We conclude that binding between digits and colors in grapheme-color synesthetes can occur bidirectionally across senses. The results are in line with the idea that synesthesia is the result of linking inducing stimuli (e.g. digits) to synesthetic percepts (colors) at an abstract - supra-modal - conceptual level of processing.

  20. Model of bidirectional reflectance distribution function for metallic materials

    NASA Astrophysics Data System (ADS)

    Wang, Kai; Zhu, Jing-Ping; Liu, Hong; Hou, Xun

    2016-09-01

    Based on the three-component assumption that the reflection is divided into specular reflection, directional diffuse reflection, and ideal diffuse reflection, a bidirectional reflectance distribution function (BRDF) model of metallic materials is presented. Compared with the two-component assumption that the reflection is composed of specular reflection and diffuse reflection, the three-component assumption divides the diffuse reflection into directional diffuse and ideal diffuse reflection. This model effectively resolves the problem that constant diffuse reflection leads to considerable error for metallic materials. Simulation and measurement results validate that this three-component BRDF model can improve the modeling accuracy significantly and describe the reflection properties in the hemisphere space precisely for the metallic materials.

  1. Bidirectional Associations Among Sensitive Parenting, Language Development, and Social Competence.

    PubMed

    Barnett, Melissa A; Gustafsson, Hanna; Deng, Min; Mills-Koonce, W Roger; Cox, Martha

    2012-07-01

    Rapid changes in language skills and social competence, both of which are linked to sensitive parenting, characterize early childhood. The present study examines bidirectional associations among mothers' sensitive parenting and children's language skills and social competence from 24 to 36 months in a community sample of 174 families. In addition, this study examines how these developmental pathways vary by child sex. Findings indicate stability across time in sensitive parenting, expressive language skills, and social competence, as well as positive main effects of sensitive parenting on expressive and receptive language skills for girls and boys. We find mixed evidence over time of reciprocal links between social competence and sensitive parenting. Further, boys' receptive language skills at 24 months uniquely contribute to increases in mothers' observed sensitive parenting from 24 to 36 months. These findings highlight the utility of applying transactional frameworks to the study of sex-based differences in early developmental processes.

  2. The start of lightning: Evidence of bidirectional lightning initiation

    PubMed Central

    Montanyà, Joan; van der Velde, Oscar; Williams, Earle R.

    2015-01-01

    Lightning flashes are known to initiate in regions of strong electric fields inside thunderstorms, between layers of positively and negatively charged precipitation particles. For that reason, lightning inception is typically hidden from sight of camera systems used in research. Other technology such as lightning mapping systems based on radio waves can typically detect only some aspects of the lightning initiation process and subsequent development of positive and negative leaders. We report here a serendipitous recording of bidirectional lightning initiation in virgin air under the cloud base at ~11,000 images per second, and the differences in characteristics of opposite polarity leader sections during the earliest stages of the discharge. This case reveals natural lightning initiation, propagation and a return stroke as in negative cloud-to-ground flashes, upon connection to another lightning channel – without any masking by cloud. PMID:26471123

  3. Bi-directional evolutionary optimization for photonic band gap structures

    SciTech Connect

    Meng, Fei; Huang, Xiaodong; Jia, Baohua

    2015-12-01

    Toward an efficient and easy-implement optimization for photonic band gap structures, this paper extends the bi-directional evolutionary structural optimization (BESO) method for maximizing photonic band gaps. Photonic crystals are assumed to be periodically composed of two dielectric materials with the different permittivity. Based on the finite element analysis and sensitivity analysis, BESO starts from a simple initial design without any band gap and gradually re-distributes dielectric materials within the unit cell so that the resulting photonic crystal possesses a maximum band gap between two specified adjacent bands. Numerical examples demonstrated the proposed optimization algorithm can successfully obtain the band gaps from the first to the tenth band for both transverse magnetic and electric polarizations. Some optimized photonic crystals exhibit novel patterns markedly different from traditional designs of photonic crystals.

  4. Bidirectional macrocyclization of peptides by double multicomponent reactions.

    PubMed

    Ricardo, Manuel G; Morales, Fidel E; Garay, Hilda; Reyes, Osvaldo; Vasilev, Dimitar; Wessjohann, Ludger A; Rivera, Daniel G

    2015-01-14

    Increasing the diversity of peptide cyclization methods is an effective way of accessing new types of macrocyclic chemotypes featuring a wide variety of ring sizes and topologies. Multicomponent reactions (MCRs) are processes capable of generating great levels of molecular diversity and complexity at low synthetic cost. In an attempt to further exploit MCRs in the field of cyclopeptides, we describe a bidirectional multicomponent approach for the synthesis of N-alkylated macrocyclic peptides of varied sequences and cross-linking positions. The process relies on the execution of two Ugi reactions between peptide diacids and diisocyanides. Varying the amino component enabled the installation of exocyclic elements of diversity, while skeletal diversity was created through different side chain and backbone cyclizations. This procedure shows prospects for the rapid scanning of the chemical space of macrocyclic peptides for applications in chemical biology and drug discovery.

  5. Dielectric Waveguides Splitter and Hybrid/Isolator for Bidirectional Link

    NASA Technical Reports Server (NTRS)

    Tang, Adrian Joseph (Inventor); Chattopadhyay, Goutam (Inventor); Chahat, Nacer E. (Inventor); Decrossas, Emmanuel (Inventor)

    2016-01-01

    A system, method, device, and apparatus provide a dielectric waveguide splitter/bi-directional link. A dielectric substrate fabricated into a first Y-junction waveguide with a first port splitting into a first branch leading to a second port and a second branch leading to a third port. An angle between the first branch and the second branch is below ninety degrees (90.degree.). The dielectric waveguide splitter enables millimeter-wave (mmWave) transmission between the first port and the second port while reducing feedback of the mmWave between the second and third port. Two Y-junction waveguides may be fabricated back-to-back to provide simultaneous bidirectional mmWave transmission at a single frequency.

  6. Bidirectional plasticity of cortical pattern recognition and behavioral sensory acuity

    PubMed Central

    Chapuis, Julie; Wilson, Donald A.

    2011-01-01

    Learning to adapt to a complex and fluctuating environment requires the ability to adjust neural representations of sensory stimuli. Through pattern completion processes, cortical networks can reconstruct familiar patterns from degraded input patterns, while pattern separation processes allow discrimination of even highly overlapping inputs. Here we show that the balance between pattern separation and completion is experience-dependent. Rats given extensive training with overlapping complex odorant mixtures show improved behavioral discrimination ability and enhanced cortical ensemble pattern separation. In contrast, behavioral training to disregard normally detectable differences between overlapping mixtures results in impaired cortical ensemble pattern separation (enhanced pattern completion) and impaired discrimination. This bidirectional effect was not found in the olfactory bulb, and may be due to plasticity within olfactory cortex itself. Thus pattern recognition, and the balance between pattern separation and completion, is highly malleable based on task demands and occurs in concert with changes in perceptual performance. PMID:22101640

  7. BiPOD Arthroscopic Acromioclavicular Repair Restores Bidirectional Stability.

    PubMed

    De Beer, Joe; Schaer, Michael; Latendresse, Kim; Raniga, Sumit; Moor, Beat K; Zumstein, Matthias A

    2016-09-19

    Stabilizing the acromioclavicular joint in the vertical and horizontal planes is challenging, and most current techniques do not reliably achieve this goal. The BiPOD repair is an arthroscopically assisted procedure performed with image intensifier guidance that reconstructs the coracoclavicular ligaments as well as the acromioclavicular ligaments to achieve bidirectional stability. Repair is achieved with a combination of 2-mm FiberTape (Arthrex, Naples, Florida) and 20-mm Poly-Tape (Neoligaments, Leeds, England) to achieve rigid repair, prevent bone abrasion, and promote tissue ingrowth. This study is a prospective review of the first 6 patients treated for high-grade acute acromioclavicular injury with the BiPOD technique. The study included 6 men who were 21 to 36 years old (mean, 27 years). At 6-month follow-up, complications were recorded and radiographic analysis was used to determine the coracoclavicular distance for vertical reduction and the amount of acromioclavicular translation on the Alexander axillary view was used to determine horizontal reduction. One patient had a superficial infection over the tape knot. The difference in coracoclavicular distance between the operated side and the uninvolved side was 9±2 mm preoperatively and 0.3±2 mm at 6-month follow-up. On Alexander axillary view, all 6 patients showed stable reduction, which is defined as a clavicle that is in line with the acromion. The findings show that BiPOD acromioclavicular reconstruction restores bidirectional stability of the acromioclavicular joint at 6 months. [Orthopedics. 201x; xx(x):exx-exx.].

  8. Feature selection by merging sequential bidirectional search into relevance vector machine in condition monitoring

    NASA Astrophysics Data System (ADS)

    Zhang, Kui; Dong, Yu; Ball, Andrew

    2015-11-01

    For more accurate fault detection and diagnosis, there is an increasing trend to use a large number of sensors and to collect data at high frequency. This inevitably produces large-scale data and causes difficulties in fault classification. Actually, the classification methods are simply intractable when applied to high-dimensional condition monitoring data. In order to solve the problem, engineers have to resort to complicated feature extraction methods to reduce the dimensionality of data. However, the features transformed by the methods cannot be understood by the engineers due to a loss of the original engineering meaning. In this paper, other forms of dimensionality reduction technique(feature selection methods) are employed to identify machinery condition, based only on frequency spectrum data. Feature selection methods are usually divided into three main types: filter, wrapper and embedded methods. Most studies are mainly focused on the first two types, whilst the development and application of the embedded feature selection methods are very limited. This paper attempts to explore a novel embedded method. The method is formed by merging a sequential bidirectional search algorithm into scale parameters tuning within a kernel function in the relevance vector machine. To demonstrate the potential for applying the method to machinery fault diagnosis, the method is implemented to rolling bearing experimental data. The results obtained by using the method are consistent with the theoretical interpretation, proving that this algorithm has important engineering significance in revealing the correlation between the faults and relevant frequency features. The proposed method is a theoretical extension of relevance vector machine, and provides an effective solution to detect the fault-related frequency components with high efficiency.

  9. Emotional Distress, Alcohol Use, and Bidirectional Partner Violence among Lesbian Women

    PubMed Central

    Lewis, Robin J.; Padilla, Miguel A.; Milletich, Robert J.; Kelley, Michelle L.; Winstead, Barbara A.; Lau-Barraco, Cathy; Mason, Tyler B.

    2015-01-01

    This study examined the relationship between emotional distress (defined as depression, brooding, and negative affect), alcohol outcomes, and bidirectional intimate partner violence among lesbian women. Results lend support to the self-medication hypothesis which predicts that lesbian women who experience more emotional distress are more likely to drink to cope, and in turn report more alcohol use, problem drinking, and alcohol-related problems. These alcohol outcomes were in turn, associated with bidirectional partner violence. These results offer preliminary evidence that, similar to findings for heterosexual women, emotional distress, alcohol use, and particularly alcohol-related problems, are risk factors for bidirectional partner violence among lesbian women. PMID:26062874

  10. Generic Kalman Filter Software

    NASA Technical Reports Server (NTRS)

    Lisano, Michael E., II; Crues, Edwin Z.

    2005-01-01

    The Generic Kalman Filter (GKF) software provides a standard basis for the development of application-specific Kalman-filter programs. Historically, Kalman filters have been implemented by customized programs that must be written, coded, and debugged anew for each unique application, then tested and tuned with simulated or actual measurement data. Total development times for typical Kalman-filter application programs have ranged from months to weeks. The GKF software can simplify the development process and reduce the development time by eliminating the need to re-create the fundamental implementation of the Kalman filter for each new application. The GKF software is written in the ANSI C programming language. It contains a generic Kalman-filter-development directory that, in turn, contains a code for a generic Kalman filter function; more specifically, it contains a generically designed and generically coded implementation of linear, linearized, and extended Kalman filtering algorithms, including algorithms for state- and covariance-update and -propagation functions. The mathematical theory that underlies the algorithms is well known and has been reported extensively in the open technical literature. Also contained in the directory are a header file that defines generic Kalman-filter data structures and prototype functions and template versions of application-specific subfunction and calling navigation/estimation routine code and headers. Once the user has provided a calling routine and the required application-specific subfunctions, the application-specific Kalman-filter software can be compiled and executed immediately. During execution, the generic Kalman-filter function is called from a higher-level navigation or estimation routine that preprocesses measurement data and post-processes output data. The generic Kalman-filter function uses the aforementioned data structures and five implementation- specific subfunctions, which have been developed by the user on

  11. Optically tunable optical filter

    NASA Astrophysics Data System (ADS)

    James, Robert T. B.; Wah, Christopher; Iizuka, Keigo; Shimotahira, Hiroshi

    1995-12-01

    We experimentally demonstrate an optically tunable optical filter that uses photorefractive barium titanate. With our filter we implement a spectrum analyzer at 632.8 nm with a resolution of 1.2 nm. We simulate a wavelength-division multiplexing system by separating two semiconductor laser diodes, at 1560 nm and 1578 nm, with the same filter. The filter has a bandwidth of 6.9 nm. We also use the same filter to take 2.5-nm-wide slices out of a 20-nm-wide superluminescent diode centered at 840 nm. As a result, we experimentally demonstrate a phenomenal tuning range from 632.8 to 1578 nm with a single filtering device.

  12. Contactor/filter improvements

    DOEpatents

    Stelman, D.

    1988-06-30

    A contactor/filter arrangement for removing particulate contaminants from a gaseous stream is described. The filter includes a housing having a substantially vertically oriented granular material retention member with upstream and downstream faces, a substantially vertically oriented microporous gas filter element, wherein the retention member and the filter element are spaced apart to provide a zone for the passage of granular material therethrough. A gaseous stream containing particulate contaminants passes through the gas inlet means as well as through the upstream face of the granular material retention member, passing through the retention member, the body of granular material, the microporous gas filter element, exiting out of the gas outlet means. A cover screen isolates the filter element from contact with the moving granular bed. In one embodiment, the granular material is comprised of porous alumina impregnated with CuO, with the cover screen cleaned by the action of the moving granular material as well as by backflow pressure pulses. 6 figs.

  13. Concentric Split Flow Filter

    NASA Technical Reports Server (NTRS)

    Stapleton, Thomas J. (Inventor)

    2015-01-01

    A concentric split flow filter may be configured to remove odor and/or bacteria from pumped air used to collect urine and fecal waste products. For instance, filter may be designed to effectively fill the volume that was previously considered wasted surrounding the transport tube of a waste management system. The concentric split flow filter may be configured to split the air flow, with substantially half of the air flow to be treated traveling through a first bed of filter media and substantially the other half of the air flow to be treated traveling through the second bed of filter media. This split flow design reduces the air velocity by 50%. In this way, the pressure drop of filter may be reduced by as much as a factor of 4 as compare to the conventional design.

  14. Hybrid Filter Membrane

    NASA Technical Reports Server (NTRS)

    Laicer, Castro; Rasimick, Brian; Green, Zachary

    2012-01-01

    Cabin environmental control is an important issue for a successful Moon mission. Due to the unique environment of the Moon, lunar dust control is one of the main problems that significantly diminishes the air quality inside spacecraft cabins. Therefore, this innovation was motivated by NASA s need to minimize the negative health impact that air-suspended lunar dust particles have on astronauts in spacecraft cabins. It is based on fabrication of a hybrid filter comprising nanofiber nonwoven layers coated on porous polymer membranes with uniform cylindrical pores. This design results in a high-efficiency gas particulate filter with low pressure drop and the ability to be easily regenerated to restore filtration performance. A hybrid filter was developed consisting of a porous membrane with uniform, micron-sized, cylindrical pore channels coated with a thin nanofiber layer. Compared to conventional filter media such as a high-efficiency particulate air (HEPA) filter, this filter is designed to provide high particle efficiency, low pressure drop, and the ability to be regenerated. These membranes have well-defined micron-sized pores and can be used independently as air filters with discreet particle size cut-off, or coated with nanofiber layers for filtration of ultrafine nanoscale particles. The filter consists of a thin design intended to facilitate filter regeneration by localized air pulsing. The two main features of this invention are the concept of combining a micro-engineered straight-pore membrane with nanofibers. The micro-engineered straight pore membrane can be prepared with extremely high precision. Because the resulting membrane pores are straight and not tortuous like those found in conventional filters, the pressure drop across the filter is significantly reduced. The nanofiber layer is applied as a very thin coating to enhance filtration efficiency for fine nanoscale particles. Additionally, the thin nanofiber coating is designed to promote capture of

  15. Total Variation Electrocardiogram Filtering

    DTIC Science & Technology

    2011-03-01

    hand, the TV smoothing is still a low pass filter, which effectively filters out high-frequency noise. Results We compared the performance of the TV...resulting signal to make the ECG samples positive and to amplify the high-frequency components. Finally, in the last stage, it uses a low -pass filter to...collected during the study on glycemic control in young adults performed at the USDA Beltsville Human Nutrition Center. The study has been approved by

  16. Filter vapor trap

    DOEpatents

    Guon, Jerold

    1976-04-13

    A sintered filter trap is adapted for insertion in a gas stream of sodium vapor to condense and deposit sodium thereon. The filter is heated and operated above the melting temperature of sodium, resulting in a more efficient means to remove sodium particulates from the effluent inert gas emanating from the surface of a liquid sodium pool. Preferably the filter leaves are precoated with a natrophobic coating such as tetracosane.

  17. Smart Filter Design.

    DTIC Science & Technology

    1991-06-01

    polarity relative to phase-state polarity . It was found that zero-state leakage (about 3% in intensity as mentioned) limited useful TPAF performance to...resources. Our first efforts used polar formatted filters having 32 sectors, of which only 16 were independent since the filter was trained as a... polar plane. One common choice for the angle of this line, for example, corresponds to thresholding on the real part of the transform. Fourier filters

  18. Linear phase compressive filter

    DOEpatents

    McEwan, Thomas E.

    1995-01-01

    A phase linear filter for soliton suppression is in the form of a laddered series of stages of non-commensurate low pass filters with each low pass filter having a series coupled inductance (L) and a reverse biased, voltage dependent varactor diode, to ground which acts as a variable capacitance (C). L and C values are set to levels which correspond to a linear or conventional phase linear filter. Inductance is mapped directly from that of an equivalent nonlinear transmission line and capacitance is mapped from the linear case using a large signal equivalent of a nonlinear transmission line.

  19. Linear phase compressive filter

    DOEpatents

    McEwan, T.E.

    1995-06-06

    A phase linear filter for soliton suppression is in the form of a laddered series of stages of non-commensurate low pass filters with each low pass filter having a series coupled inductance (L) and a reverse biased, voltage dependent varactor diode, to ground which acts as a variable capacitance (C). L and C values are set to levels which correspond to a linear or conventional phase linear filter. Inductance is mapped directly from that of an equivalent nonlinear transmission line and capacitance is mapped from the linear case using a large signal equivalent of a nonlinear transmission line. 2 figs.

  20. Nanofiber Filters Eliminate Contaminants

    NASA Technical Reports Server (NTRS)

    2009-01-01

    With support from Phase I and II SBIR funding from Johnson Space Center, Argonide Corporation of Sanford, Florida tested and developed its proprietary nanofiber water filter media. Capable of removing more than 99.99 percent of dangerous particles like bacteria, viruses, and parasites, the media was incorporated into the company's commercial NanoCeram water filter, an inductee into the Space Foundation's Space Technology Hall of Fame. In addition to its drinking water filters, Argonide now produces large-scale nanofiber filters used as part of the reverse osmosis process for industrial water purification.

  1. Filter holder and gasket assembly for candle or tube filters

    DOEpatents

    Lippert, T.E.; Alvin, M.A.; Bruck, G.J.; Smeltzer, E.E.

    1999-03-02

    A filter holder and gasket assembly are disclosed for holding a candle filter element within a hot gas cleanup system pressure vessel. The filter holder and gasket assembly includes a filter housing, an annular spacer ring securely attached within the filter housing, a gasket sock, a top gasket, a middle gasket and a cast nut. 9 figs.

  2. Filter holder and gasket assembly for candle or tube filters

    DOEpatents

    Lippert, Thomas Edwin; Alvin, Mary Anne; Bruck, Gerald Joseph; Smeltzer, Eugene E.

    1999-03-02

    A filter holder and gasket assembly for holding a candle filter element within a hot gas cleanup system pressure vessel. The filter holder and gasket assembly includes a filter housing, an annular spacer ring securely attached within the filter housing, a gasket sock, a top gasket, a middle gasket and a cast nut.

  3. Coexpression of two closely linked avian genes for purine nucleotide synthesis from a bidirectional promoter.

    PubMed Central

    Gavalas, A; Dixon, J E; Brayton, K A; Zalkin, H

    1993-01-01

    Two avian genes encoding essential steps in the purine nucleotide biosynthetic pathway are transcribed divergently from a bidirectional promoter element. The bidirectional promoter, embedded in a CpG island, directs coexpression of GPAT and AIRC genes from distinct transcriptional start sites 229 bp apart. The bidirectional promoter can be divided in half, with each half retaining partial activity towards the cognate gene. GPAT and AIRC genes encode the enzymes that catalyze step 1 and steps 6 plus 7, respectively, in the de novo purine biosynthetic pathway. This is the first report of genes coding for structurally unrelated enzymes of the same pathway that are tightly linked and transcribed divergently from a bidirectional promoter. This arrangement has the potential to provide for regulated coexpression comparable to that in a prokaryotic operon. Images PMID:8336716

  4. Bidirectional Reflectance Round-Robin in Support of the Earth Observing System Program

    NASA Technical Reports Server (NTRS)

    Early, E.; Barnes, P.; Johnson, B.; Butler, J.; Bruegge, C.; Biggar, S.; Spyak, P.; Pavlov, M.

    1999-01-01

    Laboratory measurements of the bidirectional reflectance distribution function (BRDRF) of diffuse reflectors are required to support calibration in the Earth Observing System (EOS) program of the National Aeronautics and Space Administration.

  5. Bidirectional Reflectance Functions for Application to Earth Radiation Budget Studies

    NASA Technical Reports Server (NTRS)

    Manalo-Smith, N.; Tiwari, S. N.; Smith, G. L.

    1997-01-01

    Reflected solar radiative fluxes emerging for the Earth's top of the atmosphere are inferred from satellite broadband radiance measurements by applying bidirectional reflectance functions (BDRFs) to account for the anisotropy of the radiation field. BDRF's are dependent upon the viewing geometry (i.e. solar zenith angle, view zenith angle, and relative azimuth angle), the amount and type of cloud cover, the condition of the intervening atmosphere, and the reflectance characteristics of the underlying surface. A set of operational Earth Radiation Budget Experiment (ERBE) BDRFs is available which was developed from the Nimbus 7 ERB (Earth Radiation Budget) scanner data for a three-angle grid system, An improved set of bidirectional reflectance is required for mission planning and data analysis of future earth radiation budget instruments, such as the Clouds and Earth's Radiant Energy System (CERES), and for the enhancement of existing radiation budget data products. This study presents an analytic expression for BDRFs formulated by applying a fit to the ERBE operational model tabulations. A set of model coefficients applicable to any viewing condition is computed for an overcast and a clear sky scene over four geographical surface types: ocean, land, snow, and desert, and partly cloudy scenes over ocean and land. The models are smooth in terms of the directional angles and adhere to the principle of reciprocity, i.e., they are invariant with respect to the interchange of the incoming and outgoing directional angles. The analytic BDRFs and the radiance standard deviations are compared with the operational ERBE models and validated with ERBE data. The clear ocean model is validated with Dlhopolsky's clear ocean model. Dlhopolsky developed a BDRF of higher angular resolution for clear sky ocean from ERBE radiances. Additionally, the effectiveness of the models accounting for anisotropy for various viewing directions is tested with the ERBE along tract data. An area

  6. Bidirectional optical bistability in a dual-pumped erbium doped fiber ring laser.

    PubMed

    Lai, W J; Shum, P; Binh, L

    2004-11-15

    We investigate bidirectional optical wave propagations in a dual-pumped erbium doped fiber ring laser without isolator, and observe optical bistability behaviors. Consequently, we propose and construct a NOLM-NALM fiber ring laser to demonstrate and exploit this bidirectional optical bistability phenomenon in optical switching by introducing two tunable variable ratio couplers in the system. Numerical analyses based on the proposed laser structure have also been demonstrated corroborated with the experimental results.

  7. Isolated Bidirectional DC-DC Converter for Hybrid Electric Vehicle Application

    DTIC Science & Technology

    2006-06-13

    34Approved for public release: distribution is unlimited" Isolated Bidirectional DC-DC Converter for Hybrid Electric Vehicle Applications Sonya...requirements for DC-DC converters for electric and hybrid vehicles . This paper introduces a bidirectional, isolated DC-DC converter for medium power...the design and build of a medium power DC-DC converter . Key words: Power Converter , DC-DC, Hybrid Electric Vehicle , Battery, Galvanically Isolation

  8. Extended range harmonic filter

    NASA Technical Reports Server (NTRS)

    Jankowski, H.; Geia, A. J.; Allen, C. C.

    1973-01-01

    Two types of filters, leaky-wall and open-guide, are combined into single component. Combination gives 10 db or greater additional attenuation to fourth and higher harmonics, at expense of increasing loss of fundamental frequency by perhaps 0.05 to 0.08 db. Filter is applicable to all high power microwave transmitters, but is especially desirable for satellite transmitters.

  9. Tunable acoustical optical filter

    NASA Technical Reports Server (NTRS)

    Lane, A. L.

    1977-01-01

    Solid state filter with active crystal element increases sensitivity and resolution of passive and active spectrometers. Filter is capable of ranging through infrared and visible spectra, can be built as portable device for field use, and is suitable for ecological surveying, for pollution detection, and for pollutant classification.

  10. Filtering reprecipitated slurry

    SciTech Connect

    Morrissey, M.F.

    1992-01-01

    As part of the Late Washing Demonstration at Savannah River Technology Center, Interim Waste Technology has filtered reprecipitated and non reprecipitated slurry with the Experimental Laboratory Filter (ELF) at TNX. Reprecipitated slurry generates higher permeate fluxes than non reprecipitated slurry. Washing reprecipitated slurry may require a defoamer because reprecipitation encourages foaming.

  11. Filtering reprecipitated slurry

    SciTech Connect

    Morrissey, M.F.

    1992-12-31

    As part of the Late Washing Demonstration at Savannah River Technology Center, Interim Waste Technology has filtered reprecipitated and non reprecipitated slurry with the Experimental Laboratory Filter (ELF) at TNX. Reprecipitated slurry generates higher permeate fluxes than non reprecipitated slurry. Washing reprecipitated slurry may require a defoamer because reprecipitation encourages foaming.

  12. Durability of ceramic filters

    SciTech Connect

    Alvin, M.A.; Tressler, R.E.; Lippert, T.E.; Diaz, E.S.; Smeltzer, E.E.

    1994-10-01

    The objectives of this program are to identify the potential long-term thermal/chemical effects that advanced coal-based power generating systems have on the stability of porous ceramic filter materials, as well as to assess the influence of these effects on filter operating performance and life.

  13. Implicit Kalman filtering

    NASA Technical Reports Server (NTRS)

    Skliar, M.; Ramirez, W. F.

    1997-01-01

    For an implicitly defined discrete system, a new algorithm for Kalman filtering is developed and an efficient numerical implementation scheme is proposed. Unlike the traditional explicit approach, the implicit filter can be readily applied to ill-conditioned systems and allows for generalization to descriptor systems. The implementation of the implicit filter depends on the solution of the congruence matrix equation (A1)(Px)(AT1) = Py. We develop a general iterative method for the solution of this equation, and prove necessary and sufficient conditions for convergence. It is shown that when the system matrices of an implicit system are sparse, the implicit Kalman filter requires significantly less computer time and storage to implement as compared to the traditional explicit Kalman filter. Simulation results are presented to illustrate and substantiate the theoretical developments.

  14. Sintered composite filter

    DOEpatents

    Bergman, W.

    1986-05-02

    A particulate filter medium formed of a sintered composite of 0.5 micron diameter quartz fibers and 2 micron diameter stainless steel fibers is described. Preferred composition is about 40 vol.% quartz and about 60 vol.% stainless steel fibers. The media is sintered at about 1100/sup 0/C to bond the stainless steel fibers into a cage network which holds the quartz fibers. High filter efficiency and low flow resistance are provided by the smaller quartz fibers. High strength is provided by the stainless steel fibers. The resulting media has a high efficiency and low pressure drop similar to the standard HEPA media, with tensile strength at least four times greater, and a maximum operating temperature of about 550/sup 0/C. The invention also includes methods to form the composite media and a HEPA filter utilizing the composite media. The filter media can be used to filter particles in both liquids and gases.

  15. Sub-micron filter

    DOEpatents

    Tepper, Frederick; Kaledin, Leonid

    2009-10-13

    Aluminum hydroxide fibers approximately 2 nanometers in diameter and with surface areas ranging from 200 to 650 m.sup.2/g have been found to be highly electropositive. When dispersed in water they are able to attach to and retain electronegative particles. When combined into a composite filter with other fibers or particles they can filter bacteria and nano size particulates such as viruses and colloidal particles at high flux through the filter. Such filters can be used for purification and sterilization of water, biological, medical and pharmaceutical fluids, and as a collector/concentrator for detection and assay of microbes and viruses. The alumina fibers are also capable of filtering sub-micron inorganic and metallic particles to produce ultra pure water. The fibers are suitable as a substrate for growth of cells. Macromolecules such as proteins may be separated from each other based on their electronegative charges.

  16. Bflinks: Reliable Bugfix Links via Bidirectional References and Tuned Heuristics

    PubMed Central

    2014-01-01

    Background. Data from software version archives and defect databases can be used for defect insertion circumstance analysis and defect prediction. The first step in such analyses is identifying defect-correcting changes in the version archive (bugfix commits) and enriching them with additional metadata by establishing bugfix links to corresponding entries in the defect database. Candidate bugfix commits are typically identified via heuristic string matching on the commit message. Research Questions. Which filters could be used to obtain a set of bugfix links? How to tune their parameters? What accuracy is achieved? Method. We analyze a modular set of seven independent filters, including new ones that make use of reverse links, and evaluate visual heuristics for setting cutoff parameters. For a commercial repository, a product expert manually verifies over 2500 links to validate the results with unprecedented accuracy. Results. The heuristics pick a very good parameter value for five filters and a reasonably good one for the sixth. The combined filtering, called bflinks, provides 93% precision and only 7% results loss. Conclusion. Bflinks can provide high-quality results and adapts to repositories with different properties. PMID:27433506

  17. Bidirectional uncoating of the genomic RNA of a helical virus.

    PubMed Central

    Wu, X; Shaw, J

    1996-01-01

    An essential step in the initiation of a virus infection is the release of the viral genome from the other constituents of the virus particle, a process referred to as uncoating. We have used reverse transcription and polymerase chain reaction amplification procedures to determine the rate and direction of in vivo uncoating of the rod-shaped tobacco mosaic virus. The virus particles contain a single 6.4-kb RNA molecule that lies between successive turns of a helical arrangement of coat protein subunits. When the particles are introduced into plant cells, the subunits are removed via a bidirectional uncoating mechanism. Within 2-3 min, the part of the viral RNA from the 5' end to a position >70% toward the 3' end has been freed of coat protein subunits. This is followed by removal of subunits from the 3' end of the RNA and sequential uncoating of the RNA in a 3'-to-5' direction. An internal region of the viral RNA is the final part to be uncoated. Progeny virus particles are detected in the cells 35-40 min after inoculation. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 PMID:8610154

  18. Engineering controllable bidirectional molecular motors based on myosin.

    PubMed

    Chen, Lu; Nakamura, Muneaki; Schindler, Tony D; Parker, David; Bryant, Zev

    2012-02-19

    Cytoskeletal motors drive the transport of organelles and molecular cargoes within cells and have potential applications in molecular detection and diagnostic devices. Engineering molecular motors with controllable properties will allow selective perturbation of mechanical processes in living cells and provide optimized device components for tasks such as molecular sorting and directed assembly. Biological motors have previously been modified by introducing activation/deactivation switches that respond to metal ions and other signals. Here, we show that myosin motors can be engineered to reversibly change their direction of motion in response to a calcium signal. Building on previous protein engineering studies and guided by a structural model for the redirected power stroke of myosin VI, we have constructed bidirectional myosins through the rigid recombination of structural modules. The performance of the motors was confirmed using gliding filament assays and single fluorophore tracking. Our strategy, in which external signals trigger changes in the geometry and mechanics of myosin lever arms, should make it possible to achieve spatiotemporal control over a range of motor properties including processivity, stride size and branchpoint turning.

  19. Novel design of bi-directional triplexer based on PLC

    NASA Astrophysics Data System (ADS)

    Xu, Chenglin; Shen, Linping; Zhou, Dong; Huang, Wei-Ping; Hong, Jin

    2005-09-01

    As the development of the technology, fiber-to-the-home (FTTH) becomes a feasible solution to meet the increasing demand on bandwidth. Due to the massive number of end users, cheap and reliable components become the bottleneck to deploy the new technology. Triplexer is one of the key components in the FTTH and is used by every end user. Currently, the available triplexers are either based on bulk optics or fiber optics with large size and high price due to manual labor involved. Planar lightwave circuit (PLC) is a possible technology for massive production and cost reduction. However, it is very challenging to design such bi-directional triplexer on PLC. The first challenge is that three channels, at λ=1310nm, 1490nm, and 1555nm, are separated unevenly over a very large wavelength range; Secondly, the bandwidths of the three channels, Δλ=100nm, 20nm, and 10nm, are very different. In the paper, we proposed a novel design by combining both coarse WDM and dense WDM. In the design, a multi-mode interference (MMI) device is used for coarse WDM to separate the 1310nm from the other two channels. The dense WDM for the remaining two channels is performed by an array waveguide gratings (AWG). The MMI and AWG are built on the same wafer with monolithic integration. Initial simulation results show it is a very promising device.

  20. Angled multimode interferometer for bidirectional wavelength division (de)multiplexing

    PubMed Central

    Hu, Y.; Thomson, D. J.; Khokhar, A. Z.; Stanković, S.; Mitchell, C. J.; Gardes, F. Y.; Penades, J. Soler; Mashanovich, G. Z.; Reed, G. T.

    2015-01-01

    We have demonstrated a bidirectional wavelength division (de)multiplexer (WDM) on the silicon-on-insulator platform using two 4-channel angled multimode interferometers (AMMIs) sharing the same multimode interference waveguide. An excellent match of the peak transmission wavelength of each channel between the two AMMIs was achieved. The input and output access waveguides were arranged in a configuration such that the propagation of light of one AMMI in the multimode interference waveguide suffered minimal perturbation by the input and output waveguides of the other AMMI. This type of device is ideal for the WDM system for datacom or telecom applications, e.g. an integrated optical transceiver, where the transmission wavelengths are required to match with the receiving wavelengths. The device also benefits from simple fabrication (as only a single lithography and etching step is required), improved convenience for the transceiver layout design, a reduction in tuning power and circuitry and efficient use of layout space. A low insertion loss of 3–4 dB, and low crosstalk of −15 to −20 dB, was achieved. PMID:26587242

  1. Gecko-inspired bidirectional double-sided adhesives.

    PubMed

    Wang, Zhengzhi; Gu, Ping; Wu, Xiaoping

    2014-05-14

    A new concept of gecko-inspired double-sided adhesives (DSAs) is presented. The DSAs, constructed by dual-angled (i.e. angled base and angled tip) micro-pillars on both sides of the backplane substrate, are fabricated by combinations of angled etching, mould replication, tip modification, and curing bonding. Two types of DSA, symmetric and antisymmetric (i.e. pillars are patterned symmetrically or antisymmetrically relative to the backplane), are fabricated and studied in comparison with the single-sided adhesive (SSA) counterparts through both non-conformal and conformal tests. Results indicate that the DSAs show controllable and bidirectional adhesion. Combination of the two pillar-layers can either amplify (for the antisymmetric DSA, providing a remarkable and durable adhesion capacity of 25.8 ± 2.8 N cm⁻² and a high anisotropy ratio of ∼8) or counteract (for the symmetric DSA, generating almost isotropic adhesion) the adhesion capacity and anisotropic level of one SSA (capacity of 16.2 ± 1.7 N cm⁻² and anisotropy ratio of ∼6). We demonstrate that these two DSAs can be utilized as a facile fastener for two individual objects and a small-scale delivery setup, respectively, complementing the functionality of the commonly studied SSA. As such, the double-sided patterning is believed to be a new branch in the further development of biomimetic dry adhesives.

  2. Atmospheric and Science Complexity Effects on Surface Bidirectional Reflectance

    NASA Technical Reports Server (NTRS)

    Diner, D. J. (Principal Investigator); Martonchik, J. V.; Sythe, W. D.; Hessom, C.

    1985-01-01

    Among the tools used in passive remote sensing of Earth resources in the visible and near-infrared spectral regions are measurements of spectral signature and bidirectional reflectance functions (BDRFs). Determination of surface properties using these observables is complicated by a number of factors, including: (1) mixing of surface components, such as soil and vegetation, (2) multiple reflections of radiation due to complex geometry, such as in crop canopies, and (3) atmospheric effects. In order to bridge the diversity in these different approaches, there is a need for a fundamental physical understanding of the influence of the various effects and a quantiative measure of their relative importance. In particular, we consider scene complexity effects using the example of reflection by vegetative surfaces. The interaction of sunlight with a crop canopy and interpretation of the spectral and angular dependence of the emergent radiation is basically a multidimensional radiative transfer problem. The complex canopy geometry, underlying soil cover, and presence of diffuse as well as collimated illumination will modify the reflectance characteristics of the canopy relative to those of the individual elements.

  3. Measurement and application of bidirectional reflectance distribution function

    NASA Astrophysics Data System (ADS)

    Liao, Fei; Li, Lin; Lu, Chengwen

    2016-10-01

    When a beam of light with certain intensity and distribution reaches the surface of a material, the distribution of the diffused light is related to the incident angle, the receiving angle, the wavelength of the light and the types of the material. Bidirectional Reflectance Distribution Function (BRDF) is a method to describe this distribution. For an optical system, the optical and mechanical materials' BRDF are unique, and if we want to calculate stray light of the system we should know the correct BRDF data of the whole materials. There are fundamental significances in the area of space remote sensor where BRDF is needed in the precise radiation calibration. It is also important in the military field where BRDF can be used in the object identification and target tracking, etc. In this paper, 11 kinds of aerospace materials' BRDF are measured and more than 310,000 groups of BRDF data are achieved , and also a BRDF database is established in China for the first time. With the BRDF data of the database, we can create the detector model, build the stray light radiation surface model in the stray light analysis software. In this way, the stray radiation on the detector can be calculated correctly.

  4. Design of Bi-Directional Hydrofoils for Tidal Current Turbines

    NASA Astrophysics Data System (ADS)

    Nedyalkov, Ivaylo; Wosnik, Martin

    2015-11-01

    Tidal Current Turbines operate in flows which reverse direction. Bi-directional hydrofoils have rotational symmetry and allow such turbines to operate without the need for pitch or yaw control, decreasing the initial and maintenance costs. A numerical test-bed was developed to automate the simulations of hydrofoils in OpenFOAM and was utilized to simulate the flow over eleven classes of hydrofoils comprising a total of 700 foil shapes at different angles of attack. For promising candidate foil shapes physical models of 75 mm chord and 150 mm span were fabricated and tested in the University of New Hampshire High-Speed Cavitation Tunnel (HiCaT). The experimental results were compared to the simulations for model validation. The numerical test-bed successfully generated simulations for a wide range of foil shapes, although, as expected, the k - ω - SST turbulence model employed here was not adequate for some of the foils and for large angles of attack at which separation occurred. An optimization algorithm is currently being coupled with the numerical test-bed and additional turbulence models will be implemented in the future.

  5. Bidirectional tornado modes on the Joint European Torus

    SciTech Connect

    Sandquist, P.; Sharapov, S. E.; Lisak, M.; Johnson, T.

    2007-12-15

    In discharges on the Joint European Torus [P. H. Rebut and B. E. Keen, Fusion Technol. 11, 13 (1987)] with safety factor q(0)<1 and high-power ion cyclotron resonance heating (ICRH), monster sawtooth crashes are preceded by frequency sweeping 'tornado modes' in the toroidal Alfven eigenmode frequency range. A suite of equilibrium and spectral magnetohydrodynamical codes is used for explaining the observed evolution of the tornado mode frequency and for identifying temporal evolution of the safety factor inside the q=1 radius just before sawtooth crashes. In some cases, the tornado modes are observed simultaneously with both positive and negative toroidal mode numbers. Hence, a free energy source other than the radial gradient of the energetic ion pressure exciting these modes is sought. The distribution function of the ICRH-accelerated ions is assessed with the SELFO code [J. Hedin et al., Nucl. Fusion 42, 527 (2002)] and energetic particle drive due to the velocity space anisotropy of ICRH-accelerated ions is considered analytically as the possible source for excitation of bidirectional tornado modes.

  6. Sandwiched structural panel having a bi-directional core structure

    NASA Technical Reports Server (NTRS)

    Weddendorf, Bruce (Inventor)

    1995-01-01

    A structural panel assembly has a bi-directional core structure sandwiched between and secured to a pair of outer side wall members. The core structure is formed from first and second perpendicular series of elongated strip members having crenelated configurations. The strip members in the first series thereof are transversely interwoven with the strip members in the second series thereof in a manner such that crest portions of the strip members in the first series overlie and oppose trough portions of the strip members in the second series, and trough portions of the strip members in the first series underlie and oppose crest portions of the strip members in the second series. The crest portions of all of the strip members lie generally in a first plane and are secured to the inner side of one of the panel assembly outer side walls, and the trough portions of all of the strip members lie generally in a second plane and are secured to the inner side of the other panel assembly outer side wall.

  7. Micropower circuits for bidirectional wireless telemetry in neural recording applications.

    PubMed

    Neihart, Nathan M; Harrison, Reid R

    2005-11-01

    State-of-the art neural recording systems require electronics allowing for transcutaneous, bidirectional data transfer. As these circuits will be implanted near the brain, they must be small and low power. We have developed micropower integrated circuits for recovering clock and data signals over a transcutaneous power link. The data recovery circuit produces a digital data signal from an ac power waveform that has been amplitude modulated. We have also developed an FM transmitter with the lowest power dissipation reported for biosignal telemetry. The FM transmitter consists of a low-noise biopotential amplifier and a voltage controlled oscillator used to transmit amplified neural signals at a frequency near 433 MHz. All circuits were fabricated in a standard 0.5-microm CMOS VLSI process. The resulting chip is powered through a wireless inductive link. The power consumption of the clock and data recovery circuits is measured to be 129 microW; the power consumption of the transmitter is measured to be 465 microW when using an external surface mount inductor. Using a parasitic antenna less than 2 mm long, a received power level was measured to be -59.73 dBm at a distance of one meter.

  8. Partners in crime: bidirectional transcription in unstable microsatellite disease.

    PubMed

    Batra, Ranjan; Charizanis, Konstantinos; Swanson, Maurice S

    2010-04-15

    Nearly two decades have passed since the discovery that the expansion of microsatellite trinucleotide repeats is responsible for a prominent class of neurological disorders, including Huntington disease and fragile X syndrome. These hereditary diseases are characterized by genetic anticipation or the intergenerational increase in disease severity accompanied by a decrease in age-of-onset. The revelation that the variable expansion of simple sequence repeats accounted for anticipation spawned a number of pathogenesis models and a flurry of studies designed to reveal the molecular events affected by these expansions. This work led to our current understanding that expansions in protein-coding regions result in extended homopolymeric amino acid tracts, often polyglutamine or polyQ, and deleterious protein gain-of-function effects. In contrast, expansions in noncoding regions cause RNA-mediated toxicity. However, the realization that the transcriptome is considerably more complex than previously imagined, as well as the emerging regulatory importance of antisense RNAs, has blurred this distinction. In this review, we summarize evidence for bidirectional transcription of microsatellite disease genes and discuss recent suggestions that some repeat expansions produce variable levels of both toxic RNAs and proteins that influence cell viability, disease penetrance and pathological severity.

  9. Laboratory-based bidirectional reflectance distribution functions of radiometric tarps

    SciTech Connect

    Georgiev, Georgi T.; Butler, James J

    2008-06-20

    Laboratory-based bidirectional reflectance distribution functions (BRDFs) of radiometric tarp samples used in the vicarious calibration of Earth remote sensing satellite instruments are presented in this paper. The results illustrate the BRDF dependence on the orientation of the tarps' weft and warp threads. The study was performed using the GSFC scatterometer at incident zenith angles of 0 deg., 10 deg., and 30 deg.; scatter zenith angles from 0 deg. to 60 deg.; and scatter azimuth angles of 0 deg., 45 deg., 90 deg., 135 deg., and 180 deg.. The wavelengths were 485 nm, 550 nm, 633 nm, and 800 nm. The tarp's weft and warp dependence on BRDF is well defined at all measurement geometries and wavelengths. The BRDF difference can be as high as 8% at 0 deg. incident angle and 12% at 30 deg. incident angle. The fitted BRDF data show a very small discrepancy from the measured ones. New data on the forward and backscatter properties of radiometric tarps are reported. The backward scatter is well pronounced for the white samples. The black sample has well-pronounced forward scatter. The provided BRDF characterization of radiometric tarps is an excellent reference for anyone interested in using tarps for radiometric calibrations. The results are NIST traceable.

  10. Bidirectional motility of the fission yeast kinesin-5, Cut7

    SciTech Connect

    Edamatsu, Masaki

    2014-03-28

    Highlights: • Motile properties of Cut7 (fission yeast kinesin-5) were studied for the first time. • Half-length Cut7 moved toward plus-end direction of microtubule. • Full-length Cut7 moved toward minus-end direction of microtubule. • N- and C-terminal microtubule binding sites did not switch the motile direction. - Abstract: Kinesin-5 is a homotetrameric motor with its motor domain at the N-terminus. Kinesin-5 crosslinks microtubules and functions in separating spindle poles during mitosis. In this study, the motile properties of Cut7, fission yeast kinesin-5, were examined for the first time. In in vitro motility assays, full-length Cut7 moved toward minus-end of microtubules, but the N-terminal half of Cut7 moved toward the opposite direction. Furthermore, additional truncated constructs lacking the N-terminal or C-terminal regions, but still contained the motor domain, did not switch the motile direction. These indicated that Cut7 was a bidirectional motor, and microtubule binding regions at the N-terminus and C-terminus were not involved in its directionality.

  11. Bidirectional Effects of Cannabidiol on Contextual Fear Memory Extinction

    PubMed Central

    Song, Chenchen; Stevenson, Carl W.; Guimaraes, Francisco S.; Lee, Jonathan L. C.

    2016-01-01

    Cannabidiol (CBD) has been established to have both acute and long-lasting effects to reduce fear memory expression. The long-lasting impact might be mediated by an enhancement of memory extinction or an impairment of memory reconsolidation. Here, we directly compared the effects of i.p. injections of cannabidiol (10 mg/kg) with those of the NMDA receptor antagonist MK-801 (0.1 mg/kg) and partial agonist D-cycloserine (DCS; 15 mg/kg) in order to determine the mnemonic basis of long-term fear reduction. We showed that under conditions of strong fear conditioning, CBD reduced contextual fear memory expression both acutely during the extinction session as well as later at a fear retention test. The latter test reduction was replicated by DCS, but MK-801 instead elevated test freezing. In contrast, when initial conditioning was weaker, CBD and MK-801 had similar effects to increase freezing at the fear retention test relative to vehicle controls, whereas DCS had no observable impact. This pattern of results is consistent with CBD enhancing contextual fear memory extinction when the initial conditioning is strong, but impairing extinction when conditioning is weak. This bidirectional effect of CBD may be related to stress levels induced by conditioning and evoked at retrieval during extinction, rather than the strength of the memory per se. PMID:28018227

  12. Bidirectional conversion between microwave and light via ferromagnetic magnons

    NASA Astrophysics Data System (ADS)

    Hisatomi, R.; Osada, A.; Tabuchi, Y.; Ishikawa, T.; Noguchi, A.; Yamazaki, R.; Usami, K.; Nakamura, Y.

    2016-05-01

    Coherent conversion of microwave and optical photons in the single quantum level can significantly expand our ability to process signals in various fields. Efficient up-conversion of a feeble signal in the microwave domain to the optical domain will lead to quantum-noise-limited microwave amplifiers. Coherent exchange between optical photons and microwave photons will also be a stepping stone to realize long-distance quantum communication. Here we demonstrate bidirectional and coherent conversion between microwave and light using collective spin excitations in a ferromagnet. The converter consists of two harmonic oscillator modes, a microwave cavity mode and a magnetostatic mode called the Kittel mode, where microwave photons and magnons in the respective modes are strongly coupled and hybridized. An itinerant microwave field and a traveling optical field can be coupled through the hybrid system, where the microwave field is coupled to the hybrid system through the cavity mode, while the optical field addresses the hybrid system through the Kittel mode via Faraday and inverse Faraday effects. The conversion efficiency is theoretically analyzed and experimentally evaluated. The possible schemes for improving the efficiency are also discussed.

  13. A Wireless 32-Channel Implantable Bidirectional Brain Machine Interface.

    PubMed

    Su, Yi; Routhu, Sudhamayee; Moon, Kee S; Lee, Sung Q; Youm, WooSub; Ozturk, Yusuf

    2016-09-24

    All neural information systems (NIS) rely on sensing neural activity to supply commands and control signals for computers, machines and a variety of prosthetic devices. Invasive systems achieve a high signal-to-noise ratio (SNR) by eliminating the volume conduction problems caused by tissue and bone. An implantable brain machine interface (BMI) using intracortical electrodes provides excellent detection of a broad range of frequency oscillatory activities through the placement of a sensor in direct contact with cortex. This paper introduces a compact-sized implantable wireless 32-channel bidirectional brain machine interface (BBMI) to be used with freely-moving primates. The system is designed to monitor brain sensorimotor rhythms and present current stimuli with a configurable duration, frequency and amplitude in real time to the brain based on the brain activity report. The battery is charged via a novel ultrasonic wireless power delivery module developed for efficient delivery of power into a deeply-implanted system. The system was successfully tested through bench tests and in vivo tests on a behaving primate to record the local field potential (LFP) oscillation and stimulate the target area at the same time.

  14. A Wireless 32-Channel Implantable Bidirectional Brain Machine Interface

    PubMed Central

    Su, Yi; Routhu, Sudhamayee; Moon, Kee S.; Lee, Sung Q.; Youm, WooSub; Ozturk, Yusuf

    2016-01-01

    All neural information systems (NIS) rely on sensing neural activity to supply commands and control signals for computers, machines and a variety of prosthetic devices. Invasive systems achieve a high signal-to-noise ratio (SNR) by eliminating the volume conduction problems caused by tissue and bone. An implantable brain machine interface (BMI) using intracortical electrodes provides excellent detection of a broad range of frequency oscillatory activities through the placement of a sensor in direct contact with cortex. This paper introduces a compact-sized implantable wireless 32-channel bidirectional brain machine interface (BBMI) to be used with freely-moving primates. The system is designed to monitor brain sensorimotor rhythms and present current stimuli with a configurable duration, frequency and amplitude in real time to the brain based on the brain activity report. The battery is charged via a novel ultrasonic wireless power delivery module developed for efficient delivery of power into a deeply-implanted system. The system was successfully tested through bench tests and in vivo tests on a behaving primate to record the local field potential (LFP) oscillation and stimulate the target area at the same time. PMID:27669264

  15. Ceramic fiber reinforced filter

    DOEpatents

    Stinton, David P.; McLaughlin, Jerry C.; Lowden, Richard A.

    1991-01-01

    A filter for removing particulate matter from high temperature flowing fluids, and in particular gases, that is reinforced with ceramic fibers. The filter has a ceramic base fiber material in the form of a fabric, felt, paper of the like, with the refractory fibers thereof coated with a thin layer of a protective and bonding refractory applied by chemical vapor deposition techniques. This coating causes each fiber to be physically joined to adjoining fibers so as to prevent movement of the fibers during use and to increase the strength and toughness of the composite filter. Further, the coating can be selected to minimize any reactions between the constituents of the fluids and the fibers. A description is given of the formation of a composite filter using a felt preform of commercial silicon carbide fibers together with the coating of these fibers with pure silicon carbide. Filter efficiency approaching 100% has been demonstrated with these filters. The fiber base material is alternately made from aluminosilicate fibers, zirconia fibers and alumina fibers. Coating with Al.sub.2 O.sub.3 is also described. Advanced configurations for the composite filter are suggested.

  16. Solc filter engineering

    NASA Technical Reports Server (NTRS)

    Rosenberg, W. J.; Title, A. M.

    1982-01-01

    A Solc (1965) filter configuration is presented which is both tunable and spectrally variable, since it possesses an adjustable bandwidth, and which although less efficient than a Lyot filter is attractive because of its spectral versatility. The lossless design, using only an entrance and exit polarizer, improves throughput generally and especially in the IR, where polarizers are less convenient than dichroic sheet polarizers. Attention is given to the transmission profiles of Solc filters with different numbers of elements and split elements, as well as their mechanical design features.

  17. Multilevel filtering elliptic preconditioners

    NASA Technical Reports Server (NTRS)

    Kuo, C. C. Jay; Chan, Tony F.; Tong, Charles

    1989-01-01

    A class of preconditioners is presented for elliptic problems built on ideas borrowed from the digital filtering theory and implemented on a multilevel grid structure. They are designed to be both rapidly convergent and highly parallelizable. The digital filtering viewpoint allows the use of filter design techniques for constructing elliptic preconditioners and also provides an alternative framework for understanding several other recently proposed multilevel preconditioners. Numerical results are presented to assess the convergence behavior of the new methods and to compare them with other preconditioners of multilevel type, including the usual multigrid method as preconditioner, the hierarchical basis method and a recent method proposed by Bramble-Pasciak-Xu.

  18. NOVEL MICROWAVE FILTER DESIGN TECHNIQUES.

    DTIC Science & Technology

    ELECTRIC FILTERS, MICROWAVE FREQUENCY), (*MICROWAVE EQUIPMENT, ELECTRIC FILTERS), CIRCUITS, CAPACITORS, COILS, RESONATORS, STRIP TRANSMISSION LINES, WAVEGUIDES, TUNING DEVICES, PARAMETRIC AMPLIFIERS, FREQUENCY CONVERTERS .

  19. Endocannabinoids mediate bidirectional striatal spike-timing-dependent plasticity

    PubMed Central

    Cui, Yihui; Paillé, Vincent; Xu, Hao; Genet, Stéphane; Delord, Bruno; Fino, Elodie; Berry, Hugues; Venance, Laurent

    2015-01-01

    Key points Although learning can arise from few or even a single trial, synaptic plasticity is commonly assessed under prolonged activation. Here, we explored the existence of rapid responsiveness of synaptic plasticity at corticostriatal synapses in a major synaptic learning rule, spike-timing-dependent plasticity (STDP). We found that spike-timing-dependent depression (tLTD) progressively disappears when the number of paired stimulations (below 50 pairings) is decreased whereas spike-timing-dependent potentiation (tLTP) displays a biphasic profile: tLTP is observed for 75–100 pairings, is absent for 25–50 pairings and re-emerges for 5–10 pairings. This tLTP induced by low numbers of pairings (5–10) depends on activation of the endocannabinoid system, type-1 cannabinoid receptor and the transient receptor potential vanilloid type-1. Endocannabinoid-tLTP may represent a physiological mechanism operating during the rapid learning of new associative memories and behavioural rules characterizing the flexible behaviour of mammals or during the initial stages of habit learning. Abstract Synaptic plasticity, a main substrate for learning and memory, is commonly assessed with prolonged stimulations. Since learning can arise from few or even a single trial, synaptic strength is expected to adapt rapidly. However, whether synaptic plasticity occurs in response to limited event occurrences remains elusive. To answer this question, we investigated whether a low number of paired stimulations can induce plasticity in a major synaptic learning rule, spike-timing-dependent plasticity (STDP). It is known that 100 pairings induce bidirectional STDP, i.e. spike-timing-dependent potentiation (tLTP) and depression (tLTD) at most central synapses. In rodent striatum, we found that tLTD progressively disappears when the number of paired stimulations is decreased (below 50 pairings) whereas tLTP displays a biphasic profile: tLTP is observed for 75–100 pairings, absent for 25

  20. Global evaluation of ammonia bidirectional exchange and livestock diurnal variation schemes

    NASA Astrophysics Data System (ADS)

    Zhu, L.; Henze, D.; Bash, J.; Jeong, G.-R.; Cady-Pereira, K.; Shephard, M.; Luo, M.; Paulot, F.; Capps, S.

    2015-11-01

    Bidirectional air-surface exchange of ammonia (NH3) has been neglected in many air quality models. In this study, we implement the bidirectional exchange of NH3 in the GEOS-Chem global chemical transport model. We also introduce an updated diurnal variability scheme for NH3 livestock emissions and evaluate the recently developed MASAGE_NH3 bottom-up inventory. While updated diurnal variability improves comparison of modeled-to-hourly in situ measurements in the southeastern USA, NH3 concentrations decrease throughout the globe, up to 17 ppb in India and southeastern China, with corresponding decreases in aerosol nitrate by up to 7 μg m-3. The ammonium (NH4+) soil pool in the bidirectional exchange model largely extends the NH3 lifetime in the atmosphere. Including bidirectional exchange generally increases NH3 gross emissions (7.1 %) and surface concentrations (up to 3.9 ppb) throughout the globe in July, except in India and southeastern China. In April and October, it decreases NH3 gross emissions in the Northern Hemisphere (e.g., 43.6 % in April in China) and increases NH3 gross emissions in the Southern Hemisphere. Bidirectional exchange does not largely impact NH4+ wet deposition overall. While bidirectional exchange is fundamentally a better representation of NH3 emissions from fertilizers, emissions from primary sources are still underestimated and thus significant model biases remain when compared to in situ measurements in the USA. The adjoint of bidirectional exchange has also been developed for the GEOS-Chem model and is used to investigate the sensitivity of NH3 concentrations with respect to soil pH and fertilizer application rate. This study thus lays the groundwork for future inverse modeling studies to more directly constrain these physical processes rather than tuning bulk unidirectional NH3 emissions.

  1. Evidence for Bidirectional Endocannabinoid Transport across Cell Membranes*

    PubMed Central

    Chicca, Andrea; Marazzi, Janine; Nicolussi, Simon; Gertsch, Jürg

    2012-01-01

    Despite extensive research on the trafficking of anandamide (AEA) across cell membranes, little is known about the membrane transport of other endocannabinoids, such as 2-arachidonoylglycerol (2-AG). Previous studies have provided data both in favor and against a cell membrane carrier-mediated transport of endocannabinoids, using different methodological approaches. Because AEA and 2-AG undergo rapid and almost complete intracellular hydrolysis, we employed a combination of radioligand assays and absolute quantification of cellular and extracellular endocannabinoid levels. In human U937 leukemia cells, 100 nm AEA and 1 μm 2-AG were taken up through a fast and saturable process, reaching a plateau after 5 min. Employing differential pharmacological blockage of endocannabinoid uptake, breakdown, and interaction with intracellular binding proteins, we show that eicosanoid endocannabinoids harboring an arachidonoyl chain compete for a common membrane target that regulates their transport, whereas other N-acylethanolamines did not interfere with AEA and 2-AG uptake. By combining fatty acid amide hydrolase or monoacyl glycerol lipase inhibitors with hydrolase-inactive concentrations of the AEA transport inhibitors UCM707 (1 μm) and OMDM-2 (5 μm), a functional synergism on cellular AEA and 2-AG uptake was observed. Intriguingly, structurally unrelated AEA uptake inhibitors also blocked the cellular release of AEA and 2-AG. We show, for the first time, that UCM707 and OMDM-2 inhibit the bidirectional movement of AEA and 2-AG across cell membranes. Our findings suggest that a putative endocannabinoid cell membrane transporter controls the cellular AEA and 2-AG trafficking and metabolism. PMID:22879589

  2. Observing System Simulations for Small Satellite Formations Estimating Bidirectional Reflectance

    NASA Technical Reports Server (NTRS)

    Nag, Sreeja; Gatebe, Charles K.; de Weck, Olivier

    2015-01-01

    The bidirectional reflectance distribution function (BRDF) gives the reflectance of a target as a function of illumination geometry and viewing geometry, hence carries information about the anisotropy of the surface. BRDF is needed in remote sensing for the correction of view and illumination angle effects (for example in image standardization and mosaicing), for deriving albedo, for land cover classification, for cloud detection, for atmospheric correction, and other applications. However, current spaceborne instruments provide sparse angular sampling of BRDF and airborne instruments are limited in the spatial and temporal coverage. To fill the gaps in angular coverage within spatial, spectral and temporal requirements, we propose a new measurement technique: Use of small satellites in formation flight, each satellite with a VNIR (visible and near infrared) imaging spectrometer, to make multi-spectral, near-simultaneous measurements of every ground spot in the swath at multiple angles. This paper describes an observing system simulation experiment (OSSE) to evaluate the proposed concept and select the optimal formation architecture that minimizes BRDF uncertainties. The variables of the OSSE are identified; number of satellites, measurement spread in the view zenith and relative azimuth with respect to solar plane, solar zenith angle, BRDF models and wavelength of reflection. Analyzing the sensitivity of BRDF estimation errors to the variables allow simplification of the OSSE, to enable its use to rapidly evaluate formation architectures. A 6-satellite formation is shown to produce lower BRDF estimation errors, purely in terms of angular sampling as evaluated by the OSSE, than a single spacecraft with 9 forward-aft sensors. We demonstrate the ability to use OSSEs to design small satellite formations as complements to flagship mission data. The formations can fill angular sampling gaps and enable better BRDF products than currently possible.

  3. A chronic generalized bi-directional brain-machine interface

    NASA Astrophysics Data System (ADS)

    Rouse, A. G.; Stanslaski, S. R.; Cong, P.; Jensen, R. M.; Afshar, P.; Ullestad, D.; Gupta, R.; Molnar, G. F.; Moran, D. W.; Denison, T. J.

    2011-06-01

    A bi-directional neural interface (NI) system was designed and prototyped by incorporating a novel neural recording and processing subsystem into a commercial neural stimulator architecture. The NI system prototype leverages the system infrastructure from an existing neurostimulator to ensure reliable operation in a chronic implantation environment. In addition to providing predicate therapy capabilities, the device adds key elements to facilitate chronic research, such as four channels of electrocortigram/local field potential amplification and spectral analysis, a three-axis accelerometer, algorithm processing, event-based data logging, and wireless telemetry for data uploads and algorithm/configuration updates. The custom-integrated micropower sensor and interface circuits facilitate extended operation in a power-limited device. The prototype underwent significant verification testing to ensure reliability, and meets the requirements for a class CF instrument per IEC-60601 protocols. The ability of the device system to process and aid in classifying brain states was preclinically validated using an in vivo non-human primate model for brain control of a computer cursor (i.e. brain-machine interface or BMI). The primate BMI model was chosen for its ability to quantitatively measure signal decoding performance from brain activity that is similar in both amplitude and spectral content to other biomarkers used to detect disease states (e.g. Parkinson's disease). A key goal of this research prototype is to help broaden the clinical scope and acceptance of NI techniques, particularly real-time brain state detection. These techniques have the potential to be generalized beyond motor prosthesis, and are being explored for unmet needs in other neurological conditions such as movement disorders, stroke and epilepsy.

  4. A bi-directional river plume: The Columbia in summer

    NASA Astrophysics Data System (ADS)

    Hickey, B.; Geier, S.; Kachel, N.; MacFadyen, A.

    2005-09-01

    Freshwater plumes have important effects on marine ecosystems: in the presence of a plume, stratification, nutrient pathways, light and circulation patterns are significantly altered from patterns that occur under the influence of wind and ambient currents alone. The historical picture of the plume from the Columbia River is of a freshwater plume oriented southwest offshore of the Oregon shelf in summer and north or northwest along the Washington shelf in winter. Recent CTD data and new data from moored sensors support a picture quite different from the historical seasonal pattern. Specifically, the plume is frequently present up to 150 km north of the river mouth on the Washington shelf from spring to fall, even during periods of upwelling. The plume is frequently bi-directional, with branches both north and south of the river mouth. During a downwelling event, the southwest plume moves onshore over the Oregon shelf. At the same time, a new plume forms north of the river mouth over the Washington shelf, trapped within ˜20-30 km of the coast. This plume propagates and also is advected northward by inner shelf currents that reverse during downwelling. When winds return to upwelling-favorable, inner shelf currents reverse immediately to flow to the south and the shallow plume is advected offshore in the wind-driven Ekman layer. Once over the central shelf, the plume is advected farther south by the seasonal mean ambient flow. Overall, freshwater from the Columbia plume overlies the Washington shelf ˜50% or more of the summer. Capping of upwelling on the inner shelf by the Columbia freshwater plume is illustrated, where the "capping potential" is related to stratification and wind magnitude and duration. Evidence is also presented to suggest that the seaward front of the Columbia River plume may provide a barrier to the transport of harmful algal blooms to coastal beaches in summer and early fall.

  5. Bidirectional association between ESRD dialysis and diabetes: National cohort study

    PubMed Central

    Chu, Yeh-Wen; Wu, Wen-Shiann; Hsu, Chen-Fang; Wang, Jhi-Joung; Weng, Shih-Feng; Chien, Chih-Chiang

    2017-01-01

    Background Diabetes is associated with development of end-stage renal disease (ESRD) dialysis, but it is not clear whether ESRD dialysis is a risk factor for new-onset diabetes (NODM). Methods Using the Taiwan National Health Insurance Research Database, we designed two cohort studies to determine the association between dialysis and diabetes. Analysis 1 estimated the hazard ratios (HR) of ESRD dialysis in 20,585 patients with type 2 diabetes (T2DM) and 82,340 gender- and age- matched controls without diabetes. Analysis 2 estimated the HRs of NODM in 18,489 ESRD patients undergoing dialysis and 73,956 gender- and age- matched controls without ESRD dialysis. The follow-up period was from 2000 to date of endpoint, the date of death, or December 31, 2008. Cox proportional models were used to estimate the relative hazards. Results In analysis 1, the incidence of ESRD dialysis was higher in the T2DM cohort than in the non-diabetes cohort (6.78 vs. 0.61 per 1,000 person-years; HR: 7.97; 95%CI: 7.05–8.00). In analysis 2, the incidence of NODM was higher in the ESRD dialysis cohort than in the without-ESRD dialysis cohort (22.84 vs. 13.99 per 1,000 person-years; HR: 1.40; 95% CI: 1.34–1.47). Conclusions ESRD dialysis and diabetes were bidirectionally associated. The relationship between T2DM and incident ESRD dialysis was much stronger than between ESRD dialysis and NODM. Further studies are needed to determine the mechanism of ESRD dialysis-related NODM. PMID:28296932

  6. A Chronic Generalized Bi-directional Brain-Machine Interface

    PubMed Central

    Rouse, Adam; Stanslaski, Scott; Cong, Peng; Jensen, Randy; Afshar, Pedram; Ullestad, Dave; Moran, Dan; Denison, Tim

    2011-01-01

    A bi-directional neural interface (NI) system was designed and built by incorporating a novel neural recording and processing subsystem into a commercially approved neural stimulator. The NI system prototype leverages the system infrastructure from a market-approved neurostimulator to ensure reliable operation in a chronic implantation environment. In addition to providing approved therapy capabilities, the device adds key elements to facilitate chronic clinical research, such as four channels of ECoG/LFP amplification and spectral analysis, a three axis accelerometer, algorithm processing, event-based data logging, and wireless telemetry for data uploads and algorithm/configuration updates. The custom integrated micropower sensor and interface circuits facilitate extended operation in a power-limited device. The prototype underwent significant verification testing to ensure reliability, and meets the requirements for a class CF instrument per IEC-60601 protocols. The ability of the device system to process and aid in classifying brain states was preclinically validated using an in-vivo non-human primate model for brain control of a computer cursor (i.e., brain machine interface or BMI). The primate BMI model was chosen for its ability to quantitatively measure signal decoding performance from brain activity that is similar in both amplitude and spectral content to other biomarkers used to detect disease states (e.g. Parkinson’s). A key goal of this research prototype is to help broaden the clinical scope and acceptance of NI techniques, particularly real-time brain state detection. These techniques can be generalized beyond motor prosthesis, to include significant unmet needs in other neurological conditions such as movement disorders, stroke, and epilepsy. PMID:21543839

  7. Identification of consistency in rating curve data: Bidirectional Reach (BReach)

    NASA Astrophysics Data System (ADS)

    Van Eerdenbrugh, Katrien; Van Hoey, Stijn; Verhoest, Niko E. C.

    2016-04-01

    Before calculating rating curve discharges, it is crucial to identify possible interruptions in data consistency. In this research, a methodology to perform this preliminary analysis is developed and validated. This methodology, called Bidirectional Reach (BReach), evaluates in each data point results of a rating curve model with randomly sampled parameter sets. The combination of a parameter set and a data point is classified as non-acceptable if the deviation between the accompanying model result and the measurement exceeds observational uncertainty. Moreover, a tolerance degree that defines satisfactory behavior of a sequence of model results is chosen. This tolerance degree equals the percentage of observations that are allowed to have non-acceptable model results. Subsequently, the results of the classification is used to assess the maximum left and right reach for each data point of a chronologically sorted time series. This maximum left and right reach in a gauging point represent the data points in the direction of the previous respectively the following observations beyond which none of the sampled parameter sets both are satisfactory and result in an acceptable deviation. This analysis is repeated for a variety of tolerance degrees. Plotting results of this analysis for all data points and all tolerance degrees in a combined BReach plot enables the detection of changes in data consistency. Moreover, if consistent periods are detected, limits of these periods can be derived. The methodology is validated with various synthetic stage-discharge data sets and proves to be a robust technique to investigate temporal consistency of rating curve data. It provides satisfying results despite of low data availability, large errors in the estimated observational uncertainty, and a rating curve model that is known to cover only a limited part of the observations.

  8. Active-R filter

    DOEpatents

    Soderstrand, Michael A.

    1976-01-01

    An operational amplifier-type active filter in which the only capacitor in the circuit is the compensating capacitance of the operational amplifiers, the various feedback and coupling elements being essentially solely resistive.

  9. Improved optical filter

    NASA Technical Reports Server (NTRS)

    Title, A. M.

    1978-01-01

    Filter includes partial polarizer between birefrigent elements. Plastic film on partial polarizer compensates for any polarization rotation by partial polarizer. Two quarter-wave plates change incident, linearly polarized light into elliptically polarized light.

  10. HEPA air filter (image)

    MedlinePlus

    ... pet dander and other irritating allergens from the air. Along with other methods to reduce allergens, such ... controlling the amount of allergens circulating in the air. HEPA filters can be found in most air ...

  11. Compact photonic spin filters

    NASA Astrophysics Data System (ADS)

    Ke, Yougang; Liu, Zhenxing; Liu, Yachao; Zhou, Junxiao; Shu, Weixing; Luo, Hailu; Wen, Shuangchun

    2016-10-01

    In this letter, we propose and experimentally demonstrate a compact photonic spin filter formed by integrating a Pancharatnam-Berry phase lens (focal length of ±f ) into a conventional plano-concave lens (focal length of -f). By choosing the input port of the filter, photons with a desired spin state, such as the right-handed component or the left-handed one, propagate alone its original propagation direction, while the unwanted spin component is quickly diverged after passing through the filter. One application of the filter, sorting the spin-dependent components of vector vortex beams on higher-order Poincaré sphere, is also demonstrated. Our scheme provides a simple method to manipulate light, and thereby enables potential applications for photonic devices.

  12. Parallel Subconvolution Filtering Architectures

    NASA Technical Reports Server (NTRS)

    Gray, Andrew A.

    2003-01-01

    These architectures are based on methods of vector processing and the discrete-Fourier-transform/inverse-discrete- Fourier-transform (DFT-IDFT) overlap-and-save method, combined with time-block separation of digital filters into frequency-domain subfilters implemented by use of sub-convolutions. The parallel-processing method implemented in these architectures enables the use of relatively small DFT-IDFT pairs, while filter tap lengths are theoretically unlimited. The size of a DFT-IDFT pair is determined by the desired reduction in processing rate, rather than on the order of the filter that one seeks to implement. The emphasis in this report is on those aspects of the underlying theory and design rules that promote computational efficiency, parallel processing at reduced data rates, and simplification of the designs of very-large-scale integrated (VLSI) circuits needed to implement high-order filters and correlators.

  13. An experimental demonstration for carrier reused bidirectional PON system with adaptive modulation DDO-OFDM downstream and QPSK upstream signals.

    PubMed

    Yan, Jhih-Heng; Chen, You-Wei; Shen, Kuan-Heng; Feng, Kai-Ming

    2013-11-18

    A light source centralized bidirectional passive optical network (PON) system based on multiband direct-detection optical orthogonal frequency division multiplexing (DDO-OFDM) downstream and quadrature phase-shift keying (QPSK) upstream is experimentally demonstrated. By introducing a simple optical single-side band (SSB) filter at the optical network unit (ONU), all the desired signal bands will be immune from the deleterious signal-signal beating interference (SSBI) noise with only single-end direct-detection scheme. An adaptive modulation configuration is employed to enhance the entire downstream throughput which results in a 150-Gbps downstream data rate with a single optical carrier. In the upstream direction, by recycling the clean downstream optical carrier, a 12.5 Gb/s QPSK format with coherent receiving mechanism in central office is adopted for better receiving sensitivity and dispersion tolerance. With the power enhancement by the long-reach PON architecture, the downstream splitting ratio can achieve as high as 1:1024.

  14. Remotely serviced filter and housing

    DOEpatents

    Ross, Maurice J.; Zaladonis, Larry A.

    1988-09-27

    A filter system for a hot cell comprises a housing adapted for input of air or other gas to be filtered, flow of the air through a filter element, and exit of filtered air. The housing is tapered at the top to make it easy to insert a filter cartridge using an overhead crane. The filter cartridge holds the filter element while the air or other gas is passed through the filter element. Captive bolts in trunnion nuts are readily operated by electromechanical manipulators operating power wrenches to secure and release the filter cartridge. The filter cartridge is adapted to make it easy to change a filter element by using a master-slave manipulator at a shielded window station.

  15. NICMOS Filter Wheel Test

    NASA Astrophysics Data System (ADS)

    Wheeler, Thomas

    2009-07-01

    This is an engineering test {described in SMOV4 Activity Description NICMOS-04} to verify the aliveness, functionality, operability, and electro-mechanical calibration of the NICMOS filter wheel motors and assembly after NCS restart in SMOV4. This test has been designed to obviate concerns over possible deformation or breakage of the fitter wheel "soda-straw" shafts due to excess rotational drag torque and/or bending moments which may be imparted due to changes in the dewar metrology from warm-up/cool-down. This test should be executed after the NCS {and filter wheel housing} has reached and approximately equilibrated to its nominal operating temperature.Addition of visits G0 - G9 {9/9/09}: Ten visits copied from proposal 11868 {visits 20, 30, ..., 90, A0, B0}. Each visit moves two filter positions, takes lamp ON/OFF exposures and then moves back to the blank position. Visits G0, G1 and G2 will leave the filter wheels disabled. The remaining visits will leave the filter wheels enabled. There are sufficient in between times to allow for data download and analysis. In the case of problem is encountered, the filter wheels will be disabled through a real time command. The in between times are all set to 22-50 hours. It is preferable to have as short as possible in between time.

  16. Contactor/filter improvements

    DOEpatents

    Stelman, David

    1989-01-01

    A contactor/filter arrangement for removing particulate contaminants from a gaseous stream includes a housing having a substantially vertically oriented granular material retention member with upstream and downstream faces, a substantially vertically oriented microporous gas filter element, wherein the retention member and the filter element are spaced apart to provide a zone for the passage of granular material therethrough. The housing further includes a gas inlet means, a gas outlet means, and means for moving a body of granular material through the zone. A gaseous stream containing particulate contaminants passes through the gas inlet means as well as through the upstream face of the granular material retention member, passing through the retention member, the body of granular material, the microporous gas filter element, exiting out of the gas outlet means. Disposed on the upstream face of the filter element is a cover screen which isolates the filter element from contact with the moving granular bed and collects a portion of the particulates so as to form a dust cake having openings small enough to exclude the granular material, yet large enough to receive the dust particles. In one embodiment, the granular material is comprised of prous alumina impregnated with CuO, with the cover screen cleaned by the action of the moving granular material as well as by backflow pressure pulses.

  17. Asymmetric coexistence: bidirectional abiotic and biotic effects between goose barnacles and mussels.

    PubMed

    Kawai, Takashi; Tokeshi, Mutsunori

    2006-07-01

    1. Species coexistence depends on the net effect of interacting species, representing the sum of multiple interaction components that may act simultaneously and vary independently depending on ambient environmental conditions. Consequently, for a comprehensive understanding of the compound nature of species interactions and coexistence, a mechanistic approach that allows a separate evaluation of each interaction component is required. 2. Two sessile filter-feeders, the goose barnacle Capitulum mitella and the mussel Septifer virgatus, coexist on moderately wave-exposed rocky shores in south-western Japan. In the upper intertidal, Capitulum positively influenced Septifer survivorship and growth through amelioration of thermal stress and of physical disturbance. On the other hand, these species are potential competitors as they have similar body sizes and modes of resource utilization. These opposite processes, facilitation and competition, are based on abiotic characteristics and biotic functions of the two species, respectively. 3. In order to quantify the bidirectional abiotic, biotic and net effects, a series of experimental manipulations was conducted involving the use of living neighbours with both abiotic and biotic effects, and artificial mimics to simulate abiotic effects without biotic effects. 4. Capitulum had strong positive abiotic effects on the mussel survivorship in most experimental periods, while the biotic effect was negligible or weakly negative, suggesting that the net effect of Capitulum on mussel survival was largely attributable to the abiotic effect. In contrast, a significantly negative biotic effect on the mussel growth rate was always present, though this was cancelled out by the larger, positive abiotic effect. In the case of Septifer, its abiotic and biotic effects on the survivorship of goose barnacles were negligible, while those on the growth rate showed temporal variation. 5. With respect to the relationship between species

  18. Apollo 11 and 16 Soil Bi-directional Solar Reflectance Measurements, Models and LRO Diviner Observations

    NASA Astrophysics Data System (ADS)

    Foote, E. J.; Paige, D. A.; Shepard, M. K.; Johnson, J. R.; Biggar, S. F.; Greenhagen, B. T.; Allen, C.

    2010-12-01

    We have compared laboratory solar reflectance measurements of Apollo 11 and 16 soil samples to Lunar Reconnaissance Orbiter (LRO) Diviner orbital albedo measurements at the Apollo landing sites. The soil samples are two representative end member samples from the moon, low albedo lunar maria (sample 10084) and high albedo lunar highlands (sample 68810). Bidirectional reflectance distribution function (BRDF) measurements of the soil samples were conducted at Bloomsburg University (BUG) and at the University of Arizona [1,2]. We collected two different types of BUG datasets: a standard set of BRDF measurements at incidence angles of 0-60°, emission angles of 0-80°, and phase angles of 3-140°, and a high-incidence angle set of measurements along and perpendicular to the principal plane at incidence angles of 0-75° and phase angles of 3-155°. The BUG measurements generated a total of 765 data points in four different filters 450, 550, 750 and 950 nm. The Blacklab measurements were acquired at incidence angles of 60-88°, emission angles 60-82°, and phase angles of 17-93° at wavelengths of 455, 554, 699, 949nm. The BUG data were fit to two BRDF models: Hapke’s model [3] as described by Johnson et al, 2010 [4], and a simplified empirical function. The fact that both approaches can satisfactorily fit the BUG data is not unexpected, given the similarities between the functions and their input parameters, and the fact that the BRDF for dark lunar soil is dominated by the single scattering phase functions of the individual soil particles. To compare our lunar sample measurements with LRO Diviner data [5], we selected all daytime observations acquired during the first year of operation within 3 km square boxes centered at the landing sites. We compared Diviner Channel 1 (0.3 - 3 µm) Lambert albedos with model calculated Lambert albedos of the lunar samples at the same photometric angles. In general, we found good agreement between the laboratory and Diviner

  19. Optical scatter of quantum noise filter cavity optics

    NASA Astrophysics Data System (ADS)

    Vander-Hyde, Daniel; Amra, Claude; Lequime, Michel; Magaña-Sandoval, Fabian; Smith, Joshua R.; Zerrad, Myriam

    2015-07-01

    Optical cavities to filter squeezed light for quantum noise reduction require optics with very low scattering losses. We report on measured light scattering from two super-polished fused silica optics before and after applying highly-reflective ion-beam sputtered dielectric coatings. We used an imaging scatterometer that illuminates the sample with a linearly polarized 1064 nm wavelength laser at a fixed angle of incidence and records images of back scatter for azimuthal angles in the plane of the laser beam. We extract from these images the bidirectional reflectance distribution function (BRDF) of the optics with and without coating and estimate their integrated scatter. We find that application of these coatings led to a more than 50% increase of the integrated wide-angle scatter, to 5.00+/- 0.30 and 3.38+/- 0.20 ppm for the two coated samples. In addition, the BRDF function of the coated optics takes on a pattern of maxima versus azimuthal angle. We compare with a scattering model to show that this is qualitatively consistent with roughness scattering from the coating layer interfaces. These results are part of a broader study to understand and minimize optical loss in quantum noise filter cavities for interferometric gravitational-wave detectors. The scattering measured for these samples is acceptable for the 16 m long filter cavities envisioned for the Laser Interferometer Gravitational-wave Observatory (LIGO), though reducing the loss further would improve LIGO’s quantum-noise limited performance.

  20. An Asymptotically-Optimal Sampling-Based Algorithm for Bi-directional Motion Planning

    PubMed Central

    Starek, Joseph A.; Gomez, Javier V.; Schmerling, Edward; Janson, Lucas; Moreno, Luis; Pavone, Marco

    2015-01-01

    Bi-directional search is a widely used strategy to increase the success and convergence rates of sampling-based motion planning algorithms. Yet, few results are available that merge both bi-directional search and asymptotic optimality into existing optimal planners, such as PRM*, RRT*, and FMT*. The objective of this paper is to fill this gap. Specifically, this paper presents a bi-directional, sampling-based, asymptotically-optimal algorithm named Bi-directional FMT* (BFMT*) that extends the Fast Marching Tree (FMT*) algorithm to bidirectional search while preserving its key properties, chiefly lazy search and asymptotic optimality through convergence in probability. BFMT* performs a two-source, lazy dynamic programming recursion over a set of randomly-drawn samples, correspondingly generating two search trees: one in cost-to-come space from the initial configuration and another in cost-to-go space from the goal configuration. Numerical experiments illustrate the advantages of BFMT* over its unidirectional counterpart, as well as a number of other state-of-the-art planners. PMID:27004130

  1. Strong electron bidirectional anisotropies in the distant tail - ISEE 3 observations of polar rain

    NASA Technical Reports Server (NTRS)

    Baker, D. N.; Bame, S. J.; Feldman, W. C.; Gosling, J. T.; Zwickl, R. D.; Slavin, J. A.; Smith, E. J.

    1986-01-01

    A detailed observational treatment of bidirectional electrons (about 50 to 500 eV) in the distant magnetotail (r not below 100 earth radii) is presented. It is found that electrons in this energy range commonly exhibit strong, field-aligned anisotropies in the tail lobes. Because of large tail motions, the ISEE 3 data provide extensive sampling of both the north and south lobes in rapid succession. These data directly demonstrate the strong asymmetries that exist between the north and south lobes at any one time. The bidirectional fluxes are found to occur predominantly in the lobe directly connected to the sunward interplanetary magnetic field in the open magnetosphere model (north lobe for away sectors and south lobe for toward sectors). Electron anisotropy and magnetic field data are presented which show the transition from unidirectional (sheath) electron populations to bidirectional (lobe) populations. The open nature of the distant magnetopause is demonstrated and it is shown that the source of the higher-energy, bidirectional lobe electrons is the tailward directed electron heat flux population in the distant magnetosheath. Taken together, the present evidence suggests that the bidirectional electrons that were observed in the distant tail are closely related to the polar rain electrons observed previously at lower altitudes. Furthermore, these data provide strong evidence that the distant tail is composed largely of open magnetic field lines in contradistinction to some recently advanced models.

  2. Ndel1-derived peptides modulate bidirectional transport of injected beads in the squid giant axon

    PubMed Central

    Segal, Michal; Soifer, Ilya; Petzold, Heike; Howard, Jonathon; Elbaum, Michael; Reiner, Orly

    2012-01-01

    Summary Bidirectional transport is a key issue in cellular biology. It requires coordination between microtubule-associated molecular motors that work in opposing directions. The major retrograde and anterograde motors involved in bidirectional transport are cytoplasmic dynein and conventional kinesin, respectively. It is clear that failures in molecular motor activity bear severe consequences, especially in the nervous system. Neuronal migration may be impaired during brain development, and impaired molecular motor activity in the adult is one of the hallmarks of neurodegenerative diseases leading to neuronal cell death. The mechanisms that regulate or coordinate kinesin and dynein activity to generate bidirectional transport of the same cargo are of utmost importance. We examined how Ndel1, a cytoplasmic dynein binding protein, may regulate non-vesicular bidirectional transport. Soluble Ndel1 protein, Ndel1-derived peptides or control proteins were mixed with fluorescent beads, injected into the squid giant axon, and the bead movements were recorded using time-lapse microscopy. Automated tracking allowed for extraction and unbiased analysis of a large data set. Beads moved in both directions with a clear bias to the anterograde direction. Velocities were distributed over a broad range and were typically slower than those associated with fast vesicle transport. Ironically, the main effect of Ndel1 and its derived peptides was an enhancement of anterograde motion. We propose that they may function primarily by inhibition of dynein-dependent resistance, which suggests that both dynein and kinesin motors may remain engaged with microtubules during bidirectional transport. PMID:23213412

  3. Combined diplexer and harmonic filter

    NASA Technical Reports Server (NTRS)

    Allen, C. C.

    1973-01-01

    By using two directional filters having circular waveguide filter cavities, diplexing and harmonic filtering functions can be combined into a more compact integrated waveguide assembly. Device is filter which passes power within its pass band limits, but also has a directional characteristic so power transmitted into two-port output waveguide will travel in only one direction.

  4. Filter and method of fabricating

    DOEpatents

    Janney, Mark A.

    2006-02-14

    A method of making a filter includes the steps of: providing a substrate having a porous surface; applying to the porous surface a coating of dry powder comprising particles to form a filter preform; and heating the filter preform to bind the substrate and the particles together to form a filter.

  5. DDP-116 general digital filtering

    NASA Technical Reports Server (NTRS)

    Jones, J. A.; Graham, R. J.

    1972-01-01

    The methods are described for calibrating, selecting filter weights, filtering, and computing filter response functions. These methods are computed on a statistical analyzer (STAN) system with a Honeywell DDP-116 central processor. The following filter types are computed: all pass, low pass, high pass, band pass, band rejection, and derivative.

  6. Achieving Bidirectional Long Delays In Pulmonary Vein Antral Lines Prior To Bidirectional Block In Patients With Paroxysmal Atrial Fibrillation (The Bi-Bi Technique For Atrial Fibrillation Ablation).

    PubMed

    Mina Md Facc Fhrs, Adel F; L Warnecke Pa-C, Nicholas

    2016-01-01

    Background: Pulmonary Vein Antral isolation (PVAI) is currently the standard of care for both paroxysmal and persistent atrial fibrillation ablation. Reconnection to the pulmonary vein is the most common cause of recurrence of atrial fibrillation. Achieving the endpoint of bidirectional block (BDB) for cavotricuspid isthmus dependant flutter has improved our outcomes for atrial flutter ablation. With this we tried to achieve long delays in the pulmonary veins antral lines prior to complete isolation comparable to those delays found in patient with bidirectional block of atrial flutter lines. Study Objective:The objective of this paper was to evaluate feasibility and efficacy of achieving Bidirectional long delays in pulmonary vein antral lines prior to Bidirectional Block in patient with paroxysmal atrial fibrillation. Method: A retrospective analysis was performed on patients who had paroxysmal atrial fibrillation procedures at Unity Point Methodist from January 2015 to January 2016. 20 consecutive patients with paroxysmal atrial fibrillation who had AF ablation using the Bi-Bi technique were evaluated. Result: Mean age was 63, number of antiarrhythmic used prior to ablation was 1.4, mean left atrial size was 38 mm. Mean chads score was 1.3. Mean EF was 53%. Long delays in the left antral circumferential lines were achieved with mean delay of 142 milliseconds +/-100. Also long delays in the right antral circumferential lines were achieved with mean delay of 150 milliseconds +/-80. 95 % (19/20) of patients were free of any atrial arrhythmias and were off antiarrhythmic medications for AF post procedure. There was only one transient complication in one patient who developed a moderate pericardial effusion that was successfully drained with no hemodynamic changes. The only patient who had recurrence was found to have asymptomatic AF with burden on his device <1%, this patient was also found to have non PV triggers for his AF. In patients with only PV triggered AF

  7. An IIR median hybrid filter

    NASA Technical Reports Server (NTRS)

    Bauer, Peter H.; Sartori, Michael A.; Bryden, Timothy M.

    1992-01-01

    A new class of nonlinear filters, the so-called class of multidirectional infinite impulse response median hybrid filters, is presented and analyzed. The input signal is processed twice using a linear shift-invariant infinite impulse response filtering module: once with normal causality and a second time with inverted causality. The final output of the MIMH filter is the median of the two-directional outputs and the original input signal. Thus, the MIMH filter is a concatenation of linear filtering and nonlinear filtering (a median filtering module). Because of this unique scheme, the MIMH filter possesses many desirable properties which are both proven and analyzed (including impulse removal, step preservation, and noise suppression). A comparison to other existing median type filters is also provided.

  8. Remotely serviced filter and housing

    DOEpatents

    Ross, M.J.; Zaladonis, L.A.

    1987-07-22

    A filter system for a hot cell comprises a housing adapted for input of air or other gas to be filtered, flow of the air through a filter element, and exit of filtered air. The housing is tapered at the top to make it easy to insert a filter cartridge holds the filter element while the air or other gas is passed through the filter element. Captive bolts in trunnion nuts are readily operated by electromechanical manipulators operating power wrenches to secure and release the filter cartridge. The filter cartridge is adapted to make it easy to change a filter element by using a master-slave manipulator at a shielded window station. 6 figs.

  9. Anti-clogging filter system

    DOEpatents

    Brown, Erik P.

    2015-05-19

    An anti-clogging filter system for filtering a fluid containing large particles and small particles includes an enclosure with at least one individual elongated tubular filter element in the enclosure. The individual elongated tubular filter element has an internal passage, a closed end, an open end, and a filtering material in or on the individual elongated tubular filter element. The fluid travels through the open end of the elongated tubular element and through the internal passage and through the filtering material. An anti-clogging element is positioned on or adjacent the individual elongated tubular filter element and provides a fluid curtain that preferentially directs the larger particulates to one area of the filter material allowing the remainder of the filter material to remain more efficient.

  10. Filters for cathodic arc plasmas

    DOEpatents

    Anders, Andre; MacGill, Robert A.; Bilek, Marcela M. M.; Brown, Ian G.

    2002-01-01

    Cathodic arc plasmas are contaminated with macroparticles. A variety of magnetic plasma filters has been used with various success in removing the macroparticles from the plasma. An open-architecture, bent solenoid filter, with additional field coils at the filter entrance and exit, improves macroparticle filtering. In particular, a double-bent filter that is twisted out of plane forms a very compact and efficient filter. The coil turns further have a flat cross-section to promote macroparticle reflection out of the filter volume. An output conditioning system formed of an expander coil, a straightener coil, and a homogenizer, may be used with the magnetic filter for expanding the filtered plasma beam to cover a larger area of the target. A cathodic arc plasma deposition system using this filter can be used for the deposition of ultrathin amorphous hard carbon (a-C) films for the magnetic storage industry.

  11. Degradation nonuniformity in the solar diffuser bidirectional reflectance distribution function.

    PubMed

    Sun, Junqiang; Chu, Mike; Wang, Menghua

    2016-08-01

    The assumption of angular dependence stability of the solar diffuser (SD) throughout degradation is critical to the on-orbit calibration of the reflective solar bands (RSBs) in many satellite sensors. Recent evidence has pointed to the contrary, and in this work, we present a thorough investigative effort into the angular dependence of the SD degradation for the Visible Infrared Imaging Radiometer Suite (VIIRS) onboard the Suomi National Polar-orbiting Partnership (SNPP) satellite and for the twin Moderate-resolution Imaging Spectroradiometer (MODIS) onboard Terra and Aqua spacecrafts. One common key step in the RSB calibration is the use of the SD degradation performance measured by an accompanying solar diffuser stability monitor (SDSM) as a valid substitute for the SD degradation factor in the direction of the RSB view. If SD degradations between these two respective directions do not maintain the same relative relationship over time, then the unmitigated use of the SDSM-measured SD degradation factor in the RSB calibration calculation will generate bias, and consequently, long-term drift in derived science products. We exploit the available history of the on-orbit calibration events to examine the response of the SDSM and the RSB detectors to the incident illumination reflecting off SD versus solar declination angle and show that the angular dependency, particularly at short wavelengths, evolves with respect to time. The generalized and the decisive conclusion is that the bidirectional reflectance distribution function (BRDF) of the SD degrades nonuniformly with respect to both incident and outgoing directions. Thus, the SDSM-based measurements provide SD degradation factors that are biased relative to the RSB view direction with respect to the SD. The analysis also reveals additional interesting phenomena, for example, the sharp behavioral change in the evolving angular dependence observed in Terra MODIS and SNPP VIIRS. For SNPP VIIRS the mitigation for this

  12. Evaluation of a hydrological model based on Bidirectional Reach (BReach)

    NASA Astrophysics Data System (ADS)

    Van Eerdenbrugh, Katrien; Van Hoey, Stijn; Verhoest, Niko E. C.

    2016-04-01

    Evaluation and discrimination of model structures is crucial to ensure an appropriate use of hydrological models. When evaluating model results by aggregating their quality in (a subset of) individual observations, overall results of this analysis sometimes conceal important detailed information about model structural deficiencies. Analyzing model results within their local (time) context can uncover this detailed information. In this research, a methodology called Bidirectional Reach (BReach) is proposed to evaluate and analyze results of a hydrological model by assessing the maximum left and right reach in each observation point that is used for model evaluation. These maximum reaches express the capability of the model to describe a subset of the evaluation data both in the direction of the previous (left) and of the following data (right). This capability is evaluated on two levels. First, on the level of individual observations, the combination of a parameter set and an observation is classified as non-acceptable if the deviation between the accompanying model result and the measurement exceeds observational uncertainty. Second, the behavior in a sequence of observations is evaluated by means of a tolerance degree. This tolerance degree expresses the condition for satisfactory model behavior in a data series and is defined by the percentage of observations within this series that can have non-acceptable model results. Based on both criteria, the maximum left and right reaches of a model in an observation represent the data points in the direction of the previous respectively the following observations beyond which none of the sampled parameter sets both are satisfactory and result in an acceptable deviation. After assessing these reaches for a variety of tolerance degrees, results can be plotted in a combined BReach plot that show temporal changes in the behavior of model results. The methodology is applied on a Probability Distributed Model (PDM) of the river

  13. Bi-directional magnetic resonance based wireless power transfer for electronic devices

    SciTech Connect

    Kar, Durga P.; Nayak, Praveen P.; Bhuyan, Satyanarayan; Mishra, Debasish

    2015-09-28

    In order to power or charge electronic devices wirelessly, a bi-directional wireless power transfer method has been proposed and experimentally investigated. In the proposed design, two receiving coils are used on both sides of a transmitting coil along its central axis to receive the power wirelessly from the generated magnetic fields through strongly coupled magnetic resonance. It has been observed experimentally that the maximum power transfer occurs at the operating resonant frequency for optimum electric load connected across the receiving coils on both side. The optimum wireless power transfer efficiency is 88% for the bi-directional power transfer technique compared 84% in the one side receiver system. By adopting the developed bi-directional power transfer method, two electronic devices can be powered up or charged simultaneously instead of a single device through usual one side receiver system without affecting the optimum power transfer efficiency.

  14. Bidirectional and Asymmetric Controlled Quantum Information Transmission via Five-qubit Brown State

    NASA Astrophysics Data System (ADS)

    Fang, Sheng-hui; Jiang, Min

    2017-02-01

    We put forward a new protocol of deterministic controlled bidirectional quantum information transmission, using a five-qubit Brown state. That is to say Alice wants to teleport an arbitrary single-qubit state to Bob and Bob wants to remotely prepare a known state for Alice via the control of the supervisor Charlie. In terms of physical implementations, only a CNOT gate, one Bell-state measurement and one qubit measurement are used in our protocol. Compared with previous study for solely bidirectional quantum teleportation and solely bidirectional remote state preparation schemes, our protocol is a kind of hybrid approach of information communication which makes the quantum channel multipurpose, i.e., no matter whether the transmitted state is known or unknown, the state information can be transmitted with each other via a five-qubit Brown state under the control of the third party as a supervisor.

  15. Microwave impedance matching strategies of an applicator supplied by a bi-directional magnetron waveguide launcher.

    PubMed

    Roussy, Georges; Kongmark, Nils

    2003-01-01

    It is shown that a bi-directional waveguide launcher can be used advantageously for reducing the reflection coefficient mismatch of an input impedance of an applicator. In a simple bi-directional waveguide launcher, the magnetron is placed in the waveguide and generates a nominal field distribution with significant output impedance in both directions of the waveguide. If a standing wave is tolerated in the torus, which connects the launcher and the applicator, the power transfer from the magnetron to the applicator can be optimal, without using special matching devices. It is also possible to match the bi-directional launcher with two inductance stubs near the antenna of the magnetron and use them for supplying a two-input applicator without reflection.

  16. Investigation and optimization of bidirectionally dual-order pumped distributed Raman amplifiers.

    PubMed

    Tong, Zhi; Wei, Huai; Jian, Shuisheng

    2004-05-03

    A theoretical investigation of bidirectionally dual-order pumped distributed Raman amplifiers is presented in detail, and comparisons with other Raman amplification schemes, i.e., bidirectional first-order pumping and Raman-plus-erbium-doped fiber hybrid amplification, are carried out, for the first time to the authors' knowledge, at identical nonlinear phase shifts. The results show that symmetric bidirectional dual-order pumping can achieve the best optical signal-to-noise ratio performance by appropriate choice of the second-order pump wavelength and second-to-first-order pump power ratio for both short- and long-span conditions, which will be helpful for designing long-haul transmission systems.

  17. A physical model of the bidirectional reflectance of vegetation canopies. I - Theory. II - Inversion and validation

    NASA Technical Reports Server (NTRS)

    Verstraete, Michel M.; Pinty, Bernard; Dickinson, Robert E.

    1990-01-01

    A new physically based analytical model of the bidirectional reflectance of vegetation canopies is derived. The model expresses the bidirectional reflectance field of a semiinfinite canopy as a combination of functions describing (1) the optical properties of the leaves through their single-scattering albedo and their phase function, (2) the average distribution of leaf orientations, and (3) the architecture of the canopy. The model is validated against laboratory and ground-based measurements in the visible and IR spectral regions, taken over two vegetation covers. The intrinsic optical properties of leaves and the information on the geometrical canopy arrangements in space were obtained using an inversion procedure based on a nonlinear optimization technique. Model predictions of bidirectional reflectances obtained using the inversion procedure compare well with actual observations.

  18. Firewall Traversal for CORBA Applications Using an Implementation of Bidirectional IIOP in MICO

    NASA Technical Reports Server (NTRS)

    Griffin, Robert I.; Lopez, Isaac (Technical Monitor)

    2002-01-01

    The Object Management Group (OMG) has added specifications to the General Inter-ORB Protocol (GIOP 1.2), specifically the Internet Inter-ORB Protocol (IIOP 1.2), that allow servers and clients on opposing sides of a firewall to reverse roles and still communicate freely. This addition to the GIOP specifications is referred to as Bidirectional GIOP. The implementation of these specifications as applied to communication over TCP/IP connections is referred to as 'Bidirectional Internet Inter-ORB Protocol' or BiDirIIOP. This paper details the implementation and testing of the BiDirIIOP Specification in an open source ORB, MICO, that did not previously support Bidirectional GIOP. It also provides simple contextual information and a description of the OMG GIOP/IIOP messaging protocols.

  19. Filter cake characterization studies

    SciTech Connect

    Newby, R.A.; Smeltzer, E.E.; Alvin, M.A.; Lippert, T.E.

    1995-11-01

    The Westinghouse Electric Corporation, Science & Technology Center is developing an Integrated Low Emissions Cleanup (ILEC) concept for high-temperature gas cleaning to meet environmental standards, as well as to provide gas turbine protection. The ILEC system is a ceramic barrier hot gas filter (HGF) that removes particulate while simultaneously contributing to the control of sulfur, alkali, and potentially other contaminants in high-temperature, high-pressure fuel gases, or combustion gases. The gas-phase contaminant removal is performed by sorbent particles injected into the HGF. The overall objective of this program is to demonstrate, at a bench scale, the technical feasibility of the ILEC concept for multi-contaminant control, and to provide test data applicable to the design of subsequent field tests. The program has conducted ceramic barrier filter testing under simulated PFBC conditions to resolve issues relating to filter cake permeability, pulse cleaning, and filter cake additive performance. ILEC testing has also been performed to assess the potential for in-filter sulfur and alkali removal.

  20. Filter component assessment

    SciTech Connect

    Alvin, M.A.; Lippert, T.E.; Diaz, E.S.; Smeltzer, E.W.

    1995-11-01

    The objectives of this program are to provide a more ruggedized filter system that utilizes porous ceramic filters which have improved resistance to damage resulting from crack propagation, thermal fatigue and/or thermal excursions during plant or process transient conditions, and/or mechanical ash bridging events within the candle filter array. As part of the current Phase 1, Task 1, effort of this program, Westinghouse is evaluating the filtration characteristics, mechanical integrity, and corrosion resistance of the following advanced or second generation candle filters for use in advanced coal-fired process applications: 3M CVI-SiC composite--chemical vapor infiltration of silicon carbide into an aluminosilicate Nextel{trademark} 312 fiber preform; DuPont PRD-66--filament wound candle filter structure containing corundum, cordierite, cristobalite, and mullite; DuPont SiC-SiC--chemical infiltration of silicon carbide into a silicon carbide Nicalon{trademark} fiber mat or felt preform; and IF and P Fibrosic{trademark}--vacuum infiltrated oxide-based chopped fibrous matrix. Results to date are presented.

  1. DOE HEPA filter test program

    SciTech Connect

    1998-05-01

    This standard establishes essential elements of a Department of Energy (DOE) program for testing HEPA filters to be installed in DOE nuclear facilities or used in DOE-contracted activities. A key element is the testing of HEPA filters for performance at a DOE Filter Test Facility (FTF) prior to installation. Other key elements are (1) providing for a DOE HEPA filter procurement program, and (2) verifying that HEPA filters to be installed in nuclear facilities appear on a Qualified Products List (QPL).

  2. Disinfecting Filters For Recirculated Air

    NASA Technical Reports Server (NTRS)

    Pilichi, Carmine A.

    1992-01-01

    Simple treatment disinfects air filters by killing bacteria, algae, fungi, mycobacteria, viruses, spores, and any other micro-organisms filters might harbor. Concept applied to reusable stainless-steel wire mesh filters and disposable air filters. Treatment used on filters in air-circulation systems in spacecraft, airplanes, other vehicles, and buildings to help prevent spread of colds, sore throats, and more-serious illnesses.

  3. Kalman filter modeling

    NASA Technical Reports Server (NTRS)

    Brown, R. G.

    1984-01-01

    The formulation of appropriate state-space models for Kalman filtering applications is studied. The so-called model is completely specified by four matrix parameters and the initial conditions of the recursive equations. Once these are determined, the die is cast, and the way in which the measurements are weighted is determined foreverafter. Thus, finding a model that fits the physical situation at hand is all important. Also, it is often the most difficult aspect of designing a Kalman filter. Formulation of discrete state models from the spectral density and ARMA random process descriptions is discussed. Finally, it is pointed out that many common processes encountered in applied work (such as band-limited white noise) simply do not lend themselves very well to Kalman filter modeling.

  4. Stack filter classifiers

    SciTech Connect

    Porter, Reid B; Hush, Don

    2009-01-01

    Just as linear models generalize the sample mean and weighted average, weighted order statistic models generalize the sample median and weighted median. This analogy can be continued informally to generalized additive modeels in the case of the mean, and Stack Filters in the case of the median. Both of these model classes have been extensively studied for signal and image processing but it is surprising to find that for pattern classification, their treatment has been significantly one sided. Generalized additive models are now a major tool in pattern classification and many different learning algorithms have been developed to fit model parameters to finite data. However Stack Filters remain largely confined to signal and image processing and learning algorithms for classification are yet to be seen. This paper is a step towards Stack Filter Classifiers and it shows that the approach is interesting from both a theoretical and a practical perspective.

  5. Transition from unidirectional to delayed bidirectional coupling in optically coupled semiconductor lasers.

    PubMed

    Bonatto, Cristian; Kelleher, Bryan; Huyet, Guillaume; Hegarty, Stephen P

    2012-02-01

    We investigate the transition from unidirectional to delayed bidirectional coupling of semiconductor lasers. By tuning the coupling strength in one direction we show how the locking region evolves as a function of the detuning and coupling strength. We consider two representative values of the relaxation oscillation damping: one where the relaxation oscillations are very underdamped and one where they are very overdamped. Qualitatively different dynamical scenarios are shown to emerge for each case. Several features of the delayed bidirectional system can be seen as remaining from the unidirectional system while others clearly arise due to the delayed coupling and are similar to effects seen in delayed feedback configurations.

  6. Scattering behavior of Lunar Lake playa determined from parabola bidirectional reflectance data

    NASA Technical Reports Server (NTRS)

    Shepard, Michael K.; Arvidson, Raymond E.; Guinness, Edward A.; Deering, Donald W.

    1991-01-01

    Bidirectional reflectance data obtained with the Portable Apparatus for Rapid Acquisition of Bidirectional Observations of Land and Atmosphere instrument at Lunar Lake, Nevada, were analyzed to determine the scattering properties of playas. The data are approximated by a Lambertian function, except at high phase angles in the solar principal plane, where Fresnel reflectance appears to dominate. The data also depart slightly (15 percent) from a Lambertian function at high emission angles in all azimuthal planes. No published photometric model accounts for the observed data. It is hypothesized that the observed scattering behavior is the superposition of volume and surface (Fresnel) scattering mechanisms.

  7. Interplanetary magnetic field orientations associated with bidirectional electron heat fluxes detected at ISEE 3

    NASA Technical Reports Server (NTRS)

    Stansberry, J. A.; Gosling, J. T.; Thomsen, M. F.; Bame, S. J.; Smith, E. J.

    1988-01-01

    A statistical survey of interplanetary magnetic field orientations associated with bidirectional electron heat fluxes observed at ISEE 3 in orbit about the Sunward Lagrange point indicates that magnetic connection of the spacecraft to the earth's shock was frequently the source of the bidirectionality. When the interplanetary magnetic field was oriented within 5 deg of the earth-spacecraft line, backstreaming electrons from the bow shock were clearly observed approximately 18 percent of the time, and connections apparently occurred for angles as large as about 30-35 deg.

  8. A Review of 25 Years of Research in Bidirectionality in Parent-Child Relationships: An Examination of Methodological Approaches

    ERIC Educational Resources Information Center

    Paschall, Katherine W.; Mastergeorge, Ann M.

    2016-01-01

    The concept of bidirectionality represents a process of mutual influence between parent and child, whereby each influences the other as well as the dyadic relationship. Despite the widespread acceptance of bidirectional models of influence, there is still a lack of integration of such models in current research designs. Research on…

  9. NICMOS Filter Wheel Test

    NASA Astrophysics Data System (ADS)

    Malhotra, Sangeeta

    2003-07-01

    This is an engineering test to verify the aliveness, functionality, operability, and electro-mechanical calibration of the NICMOS filter wheel motors and assembly after NCS restart in August 2003. This test has been designed to obviate concerns over possible deformation or breakage of the fitter wheel "soda-straw" shafts due to excess rotational drag torque and/or bending moments which may be imparted due to changes in the dewar metrology from warm-up/cool-down. This test should be executed after the NCS {and filter wheel housing} has reached and approximately equilibrated to its nominal Cycle 11 operating temperature.

  10. Electronically tuned optical filters

    NASA Technical Reports Server (NTRS)

    Castellano, J. A.; Pasierb, E. F.; Oh, C. S.; Mccaffrey, M. T.

    1972-01-01

    A detailed account is given of efforts to develop a three layer, polychromic filter that can be tuned electronically. The operation of the filter is based on the cooperative alignment of pleochroic dye molecules by nematic liquid crystals activated by electric fields. This orientation produces changes in the optical density of the material and thus changes in the color of light transmitted through the medium. In addition, attempts to improve materials and devices which employ field induced changes of a cholesteric to a nematic liquid crystal are presented.

  11. Examining a Bidirectional Association Between Depressive Symptoms and Diabetes

    PubMed Central

    Golden, Sherita Hill; Lazo, Mariana; Carnethon, Mercedes; Bertoni, Alain G.; Schreiner, Pamela J.; Roux, Ana V. Diez; Lee, Hochang Benjamin; Lyketsos, Constantine

    2008-01-01

    Context Depressive symptoms are associated with development of type 2 diabetes, but it is unclear whether type 2 diabetes is a risk factor for elevated depressive symptoms. Objective To examine the bidirectional association between depressive symptoms and type 2 diabetes. Design, Setting, and Participants Multi-Ethnic Study of Atherosclerosis, a longitudinal, ethnically diverse cohort study of US men and women aged 45 to 84 years enrolled in 2000-2002 and followed up until 2004-2005. Main Outcome Measures Elevated depressive symptoms defined by Center for Epidemiologic Studies Depression Scale (CES-D) score of 16 or higher, use of antidepressant medications, or both. The CES-D score was also modeled continuously. Participants were categorized as normal fasting glucose (<100 mg/dL), impaired fasting glucose (100-125 mg/dL), or type 2 diabetes (≥126 mg/dL or receiving treatment). Analysis 1 included 5201 participants without type 2 diabetes at baseline and estimated the relative hazard of incidenttype2diabetesover3.2yearsforthosewithandwithoutdepressivesymptoms.Analysis 2 included 4847 participants without depressive symptoms at baseline and calculated the relative odds of developing depressive symptoms over 3.1 years for those with and without type 2 diabetes. Results In analysis 1, the incidence rate of type 2 diabetes was 22.0 and 16.6 per 1000 person-years for those with and without elevated depressive symptoms, respectively. The risk of incident type 2 diabetes was 1.10 times higher for each 5-unit increment in CES-D score (95% confidence interval [CI], 1.02-1.19) after adjustment for demographic factors and body mass index. This association persisted following adjustment for metabolic, inflammatory, socioeconomic, or lifestyle factors, although it was no longer statistically significant following adjustment for the latter (relative hazard, 1.08; 95% CI, 0.99-1.19). In analysis 2, the incidence rates of elevated depressive symptoms per 1000-person years were

  12. Ceramic HEPA Filter Program

    SciTech Connect

    Mitchell, M A; Bergman, W; Haslam, J; Brown, E P; Sawyer, S; Beaulieu, R; Althouse, P; Meike, A

    2012-04-30

    Potential benefits of ceramic filters in nuclear facilities: (1) Short term benefit for DOE, NRC, and industry - (a) CalPoly HTTU provides unique testing capability to answer questions for DOE - High temperature testing of materials, components, filter, (b) Several DNFSB correspondences and presentations by DNFSB members have highlighted the need for HEPA filter R and D - DNFSB Recommendation 2009-2 highlighted a nuclear facility response to an evaluation basis earthquake followed by a fire (aka shake-n-bake) and CalPoly has capability for a shake-n-bake test; (2) Intermediate term benefit for DOE and industry - (a) Filtration for specialty applications, e.g., explosive applications at Nevada, (b) Spin-off technologies applicable to other commercial industries; and (3) Long term benefit for DOE, NRC, and industry - (a) Across industry, strong desire for better performance filter, (b) Engineering solution to safety problem will improve facility safety and decrease dependence on associated support systems, (c) Large potential life-cycle cost savings, and (d) Facilitates development and deployment of LLNL process innovations to allow continuous ventilation system operation during a fire.

  13. Rotating drum filter

    DOEpatents

    Anson, Donald

    1990-01-01

    A perforated drum (10) rotates in a coaxial cylindrical housing (18) having three circumferential ports (19,22,23), and an axial outlet (24) at one end. The axis (11) is horizontal. A fibrous filter medium (20) is fed through a port (19) on or near the top of the housing (81) by a distributing mechanism (36) which lays a uniform mat (26) of the desired thickness onto the rotating drum (10). This mat (26) is carried by the drum (10) to a second port (23) through which dirty fluid (13) enters. The fluid (13) passes through the filter (26) and the cleaned stream (16) exits through the open end (15) of the drum (10) and the axial port (24) in the housing (18). The dirty filter material (20) is carried on to a third port (22) near the bottom of the housing (18) and drops into a receiver (31) from which it is continuously removed, cleaned (30), and returned (32) to the charging port (36) at the top. To support the filter mat, the perforated cylinder may carry a series of tines (40), shaped blades (41), or pockets, so that the mat (26) will not fall from the drum (10) prematurely. To minimize risk of mat failure, the fluid inlet port (23) may be located above the horizontal centerline (11).

  14. Digital hum filtering

    USGS Publications Warehouse

    Knapp, R.W.; Anderson, N.L.

    1994-01-01

    Data may be overprinted by a steady-state cyclical noise (hum). Steady-state indicates that the noise is invariant with time; its attributes, frequency, amplitude, and phase, do not change with time. Hum recorded on seismic data usually is powerline noise and associated higher harmonics; leakage from full-waveform rectified cathodic protection devices that contain the odd higher harmonics of powerline frequencies; or vibrational noise from mechanical devices. The fundamental frequency of powerline hum may be removed during data acquisition with the use of notch filters. Unfortunately, notch filters do not discriminate signal and noise, attenuating both. They also distort adjacent frequencies by phase shifting. Finally, they attenuate only the fundamental mode of the powerline noise; higher harmonics and frequencies other than that of powerlines are not removed. Digital notch filters, applied during processing, have many of the same problems as analog filters applied in the field. The method described here removes hum of a particular frequency. Hum attributes are measured by discrete Fourier analysis, and the hum is canceled from the data by subtraction. Errors are slight and the result of the presence of (random) noise in the window or asynchrony of the hum and data sampling. Error is minimized by increasing window size or by resampling to a finer interval. Errors affect the degree of hum attenuation, not the signal. The residual is steady-state hum of the same frequency. ?? 1994.

  15. The microstrip wideband filter

    NASA Astrophysics Data System (ADS)

    Khodenkov, S. A.; Belyaev, B. A.; Balva, Ya F.; Aplesnin, S. S.; Bandurina, O. N.

    2016-11-01

    The filter of high frequency-selective properties is developed. The central six-mode resonator of the design which can be used in the aerospace equipment is electromagnetically connected with six single-mode resonators. The good agreement of the calculated data in comparison with the data received on the experimental model of a design is shown.

  16. Ozone decomposing filter

    SciTech Connect

    Simandl, R.F.; Brown, J.D.; Whinnery, L.L. Jr.

    1999-11-02

    In an improved ozone decomposing air filter carbon fibers are held together with a carbonized binder in a perforated structure. The structure is made by combining rayon fibers with gelatin, forming the mixture in a mold, freeze-drying, and vacuum baking.

  17. Domain wall filters

    SciTech Connect

    Baer, Oliver; Narayanan, Rajamani; Neuberger, Herbert; Witzel, Oliver

    2007-03-15

    We propose using the extra dimension separating the domain walls carrying lattice quarks of opposite handedness to gradually filter out the ultraviolet fluctuations of the gauge fields that are felt by the fermionic excitations living in the bulk. This generalization of the homogeneous domain wall construction has some theoretical features that seem nontrivial.

  18. Digital transversal filter architecture

    NASA Astrophysics Data System (ADS)

    Greenberger, A. J.

    1985-01-01

    A fast and efficient architecture is described for the realization of a pipelined, fully parallel digital transversal filter in VLSI. The order of summation is changed such that no explicit multiplication is seen, gated accumulators are used, and the coefficients are circulated. Estimates for the number of transistors needed for a CMOS implementation are given.

  19. Filter Component Assessment

    SciTech Connect

    Alvin, M.A.; Lippert, T.E.; Diaz, E.S.; Smeltzer, E.E.

    1996-12-31

    Advanced particulate filtration systems are currently being developed at Westinghouse for use in both coal-fired Integrated Gasification Combined Cycle (IGCC) and Pressurized Fluidized Bed Combustion (PFBC) systems. To date, Westinghouse has demonstrated 5855 hours of successful operation of first generation monolithic filter elements in PFBC applications when ash bridging or process thermal transient excursions are avoided. Alternate advanced monolithic and second generation fiber reinforced, filament wound and vacuum infiltrated filters are also being developed which are considered to have enhanced high temperature creep resistance, improved fracture toughness, or enhanced thermal shock characteristics, respectively. Mechanical and component fabrication improvements, as well as degradation mechanisms for each filter element have been identified by Westinghouse during exposure to simulated PFBC operating conditions and alkali-containing steam/air environments. Additional effort is currently being focused on determining the stability of the advanced monolithic high temperature creep resistant clay bonded silicon carbide (SiC) materials, alumina/mullite, and chemically vapor infiltrated (CVI) SiC materials during operation in the Westinghouse Advanced Particulate Filtration (W-APF) system at Foster Wheeler`s pressurized circulating fluidized-bed combustion (PCFBC) test facility in Karhula, Finland. Select advanced filter materials are being defined for additional long-term exposure in integrated gasification combined cycle (IGCC) gas streams. The results of these efforts are summarized in this paper. 6 refs., 7 figs., 11 tabs.

  20. Ozone decomposing filter

    DOEpatents

    Simandl, Ronald F.; Brown, John D.; Whinnery, Jr., LeRoy L.

    1999-01-01

    In an improved ozone decomposing air filter carbon fibers are held together with a carbonized binder in a perforated structure. The structure is made by combining rayon fibers with gelatin, forming the mixture in a mold, freeze-drying, and vacuum baking.

  1. Filter Sensing Technologies

    SciTech Connect

    Sappok, Alex; Herman, Andrew; Parks, Jim; Prikhodko, Vitaly

    2016-07-21

    Leaders from Filter Sensing Technologies, CTS Corporation, and Oak Ridge National Laboratory discuss how a small business developed an award-winning diesel emissions control sensor with support from the DOE Vehicle Technologies Office and researchers at ORNL’s National Transportation Research Center.

  2. Filter Sensing Technologies

    ScienceCinema

    Sappok, Alex; Herman, Andrew; Parks, Jim; Prikhodko, Vitaly

    2016-10-19

    Leaders from Filter Sensing Technologies, CTS Corporation, and Oak Ridge National Laboratory discuss how a small business developed an award-winning diesel emissions control sensor with support from the DOE Vehicle Technologies Office and researchers at ORNL’s National Transportation Research Center.

  3. Foam For Filtering

    NASA Technical Reports Server (NTRS)

    1978-01-01

    Like nature's honeycomb, foam is a structure of many-sided cells, apparently solid but actually only three percent material and 97 percent air. Foam is made by a heat-producing chemical reaction which expands a plastic material in a manner somewhat akin to the heat-induced rising of a loaf of bread. The resulting structure of interconnected cells is flexible yet strong and extremely versatile in applicati6n. Foam can, for example, be a sound absorber in one form, while in another it allows sound to pass through it. It can be a very soft powder puff material and at the same time a highly abrasive scrubber. A sampling of foam uses includes stereo speaker grilles, applying postage meter ink, filtering lawnmower carburetor air; deadening noise in trucks and tractors, applying cosmetics, releasing fabric softener and antistatic agents in home clothes dryers, painting, filtering factory heating and ventilating systems, shining shoes, polishing cars, sponge-mopping floors, acting as pre-operative surgical scrubbers-the list is virtually limitless. The process by which foam is made produces "windows," thin plastic membranes connecting the cell walls. Windowed foam is used in many applications but for certain others-filtering, for example-it is desirable to have a completely open network. Scott Paper Company's Foam Division, Chester, Pennsylvania, improved a patented method of "removing the windows," to create an open structure that affords special utility in filtering applications. NASA technology contributed to Scott's improvement.

  4. INTERIOR VIEW OF FILTER WHEEL MACHINE USED TO FILTER OUT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW OF FILTER WHEEL MACHINE USED TO FILTER OUT AND SEPARATE BICARBONATE FROM AMMONIONATED BRINE. DISCHARGE FROM STRIPPER COLUMNS (SOLVAY COLUMNS). - Solvay Process Company, SA Wetside Building, Between Willis & Milton Avenue, Solvay, Onondaga County, NY

  5. Filter assembly for metallic and intermetallic tube filters

    DOEpatents

    Alvin, Mary Anne; Lippert, Thomas E.; Bruck, Gerald J.; Smeltzer, Eugene E.

    2001-01-01

    A filter assembly (60) for holding a filter element (28) within a hot gas cleanup system pressure vessel is provided, containing: a filter housing (62), said filter housing having a certain axial length and having a peripheral sidewall, said sidewall defining an interior chamber (66); a one piece, all metal, fail-safe/regenerator device (68) within the interior chamber (66) of the filter housing (62) and/or extending beyond the axial length of the filter housing, said device containing an outward extending radial flange (71) within the filter housing for seating an essential seal (70), the device also having heat transfer media (72) disposed inside and screens (80) for particulate removal; one compliant gasket (70) positioned next to and above the outward extending radial flange of the fail-safe/regenerator device; and a porous metallic corrosion resistant superalloy type filter element body welded at the bottom of the metal fail-safe/regenerator device.

  6. DEMONSTRATION BULLETIN: COLLOID POLISHING FILTER METHOD - FILTER FLOW TECHNOLOGY, INC.

    EPA Science Inventory

    The Filter Flow Technology, Inc. (FFT) Colloid Polishing Filter Method (CPFM) was tested as a transportable, trailer mounted, system that uses sorption and chemical complexing phenomena to remove heavy metals and nontritium radionuclides from water. Contaminated waters can be pro...

  7. Optically bistable interference filter

    NASA Astrophysics Data System (ADS)

    Feng, Weiting

    1990-07-01

    In general the temperature dependence of refractive index of coating materials is usually small. The most notable exception being the lead telluride. Thinfilm filters made of PbTe possess anomalously high nortlinearily in refractive index. We have investigated the phenomenon theoretically and experimexitally. 2 . BISTABLE CHARACTERISTICS OF INTERFERENCE FILTERS It can be proved that the transmittance and reflectance of a twin-cavity NLIF which consists of two F-B filters coupled by a single low-index are given by 2 a(1r1 )(1-r0) T --i. -. (1) -d (1r01) (1r12) (1-i-Fsin 4)(1+sin p) where a r01 F . Te phase change of the cavity 0 IS 2r0dnAI0D (2) 2k5dT 1k where the absorbtance A 00 the initial detunning of fresonance and the first term on the right side of the equation(1)-(2) the output characteristics of the NLIF can be calculated. 3 . EXPERIMENTAL CASE The interference filters suggested to be used in my research will be made by vacuum deposition with a thermal source. The filters will be made according to the prescripti The dominant mechanism responsible for d(nhl) must be the change in the refractive index. A low limit on the OB switch-on time is found to be O. 35us and switch-off time is 5. 5us. 4. REFERENCES 1. W. T. Feng " Temperature effects on properties of zinc selenide and lead telluride" to be published in Infrared Physics. 2. H. S. Carslaw Conduction

  8. OPTIMIZATION OF ADVANCED FILTER SYSTEMS

    SciTech Connect

    R.A. Newby; M.A. Alvin; G.J. Bruck; T.E. Lippert; E.E. Smeltzer; M.E. Stampahar

    2002-06-30

    Two advanced, hot gas, barrier filter system concepts have been proposed by the Siemens Westinghouse Power Corporation to improve the reliability and availability of barrier filter systems in applications such as PFBC and IGCC power generation. The two hot gas, barrier filter system concepts, the inverted candle filter system and the sheet filter system, were the focus of bench-scale testing, data evaluations, and commercial cost evaluations to assess their feasibility as viable barrier filter systems. The program results show that the inverted candle filter system has high potential to be a highly reliable, commercially successful, hot gas, barrier filter system. Some types of thin-walled, standard candle filter elements can be used directly as inverted candle filter elements, and the development of a new type of filter element is not a requirement of this technology. Six types of inverted candle filter elements were procured and assessed in the program in cold flow and high-temperature test campaigns. The thin-walled McDermott 610 CFCC inverted candle filter elements, and the thin-walled Pall iron aluminide inverted candle filter elements are the best candidates for demonstration of the technology. Although the capital cost of the inverted candle filter system is estimated to range from about 0 to 15% greater than the capital cost of the standard candle filter system, the operating cost and life-cycle cost of the inverted candle filter system is expected to be superior to that of the standard candle filter system. Improved hot gas, barrier filter system availability will result in improved overall power plant economics. The inverted candle filter system is recommended for continued development through larger-scale testing in a coal-fueled test facility, and inverted candle containment equipment has been fabricated and shipped to a gasifier development site for potential future testing. Two types of sheet filter elements were procured and assessed in the program

  9. Estimation of NH3 Bi-Directional Flux from Managed Agricultural Soils

    EPA Science Inventory

    The Community Multi-Scale Air Quality model (CMAQ v4.7) contains a bi-directional ammonia (NH3) flux option that computes emission and deposition of ammonia derived from commercial fertilizer via a temperature dependent parameterization of canopy and soil compensation ...

  10. Poor School Bonding and Delinquency over Time: Bidirectional Effects and Sex Differences

    ERIC Educational Resources Information Center

    Liljeberg, Jenny Freidenfelt; Eklund, Jenny M.; Fritz, Marie Vafors; Klinteberg, Britt af

    2011-01-01

    The association between poor school bonding and delinquency has only been partly addressed in earlier research. Using a longitudinal design, the objective of our study was to investigate possible bidirectional effects and sex differences between adolescents' experienced school bonding and self-rated delinquency over time. A total of 788…

  11. A Model of Bidirectional Synaptic Plasticity: From Signaling Network to Channel Conductance

    ERIC Educational Resources Information Center

    Castellani, Gastone C.; Quinlan, Elizabeth M.; Bersani, Ferdinando; Cooper, Leon N.; Shouval, Harel Z.

    2005-01-01

    In many regions of the brain, including the mammalian cortex, the strength of synaptic transmission can be bidirectionally regulated by cortical activity (synaptic plasticity). One line of evidence indicates that long-term synaptic potentiation (LTP) and long-term synaptic depression (LTD), correlate with the phosphorylation/dephosphorylation of…

  12. Asymmetric Bidirectional Controlled Teleportation by Using Six-qubit Cluster State

    NASA Astrophysics Data System (ADS)

    Li, Yuan-hua; Nie, Li-ping; Li, Xiao-lan; Sang, Ming-huang

    2016-06-01

    We propose a scheme for asymmetric bidirectional controlled teleportation by using a six-qubit cluster state as quantum channel. In our scheme, Alice can transmit an arbitrary two-qubit entangled state to Bob and at the same time Bob can teleport an arbitrary single-qubit state to Alice under the control of the supervisor Charlie.

  13. Bidirectional Associations between Sleep (Quality and Duration) and Psychosocial Functioning across the University Years

    ERIC Educational Resources Information Center

    Tavernier, Royette; Willoughby, Teena

    2014-01-01

    Despite extensive research on sleep and psychosocial functioning, an important gap within the literature is the lack of inquiry into the direction of effects between these 2 constructs. The purpose of the present 3-year longitudinal study was to examine bidirectional associations between sleep (quality and duration) and 3 indices of psychosocial…

  14. Empirical analysis of the lane formation process in bidirectional pedestrian flow

    NASA Astrophysics Data System (ADS)

    Feliciani, Claudio; Nishinari, Katsuhiro

    2016-09-01

    This paper presents an experimental study on pedestrian bidirectional streams and the mechanisms leading to spontaneous lane formation by examining the flow formed by two groups of people walking toward each other in a mock corridor. Flow ratio is changed by changing each group size while maintaining comparable total flow and density. By tracking the trajectories of each pedestrian and analyzing the data obtained, five different phases were recognized as contributing to the transition from unidirectional to bidirectional flow including the spontaneous creation and dissolution of lanes. It has been shown that a statistical treatment is required to understand the fundamental characteristics of pedestrian dynamics and some two-dimensional quantities such as order parameter and rotation range were introduced to allow a more complete analysis. All the quantities observed showed a clear relationship with flow ratio and helped distinguishing between the different characteristic phases of the experiment. Results show that balanced bidirectional flow becomes the most stable configuration after lanes are formed, but the lane creation process requires pedestrians to laterally move to a largest extent compared to low flow-ratio configurations. This finding allows us to understand the reasons why balanced bidirectional flow is efficient at low densities, but quickly leads to deadlock formation at high densities.

  15. REVIEW ARTICLE: Hither and yon: a review of bi-directional microtubule-based transport

    NASA Astrophysics Data System (ADS)

    Gross, Steven P.

    2004-06-01

    Active transport is critical for cellular organization and function, and impaired transport has been linked to diseases such as neuronal degeneration. Much long distance transport in cells uses opposite polarity molecular motors of the kinesin and dynein families to move cargos along microtubules. It is increasingly clear that many cargos are moved by both sets of motors, and frequently reverse course. This review compares this bi-directional transport to the more well studied uni-directional transport. It discusses some bi-directionally moving cargos, and critically evaluates three different physical models for how such transport might occur. It then considers the evidence for the number of active motors per cargo, and how the net or average direction of transport might be controlled. The likelihood of a complex linking the activities of kinesin and dynein is also discussed. The paper concludes by reviewing elements of apparent universality between different bi-directionally moving cargos and by briefly considering possible reasons for the existence of bi-directional transport.

  16. Development and evaluation of an ammonia bidirectional flux parameterization for air quality models

    NASA Astrophysics Data System (ADS)

    Pleim, Jonathan E.; Bash, Jesse O.; Walker, John T.; Cooter, Ellen J.

    2013-05-01

    is an important contributor to particulate matter in the atmosphere and can significantly impact terrestrial and aquatic ecosystems. Surface exchange between the atmosphere and biosphere is a key part of the ammonia cycle. New modeling techniques are being developed for use in air quality models that replace current ammonia emissions from fertilized crops and ammonia dry deposition with a bidirectional surface flux model including linkage to a detailed biogeochemical and farm management model. Recent field studies involving surface flux measurements over crops that predominate in North America have been crucial for extending earlier bidirectional flux models toward more realistic treatment of NH3 fluxes for croplands. Comparisons of the ammonia bidirection flux algorithm to both lightly fertilized soybeans and heavily fertilized corn demonstrate that the model can capture the magnitude and dynamics of observed ammonia fluxes, both net deposition and evasion, over a range of conditions with overall biases on the order of the uncertainty of the measurements. However, successful application to the field experiment in heavily fertilized corn required substantial modification of the model to include new parameterizations for in-soil diffusion resistance, ground quasi-laminar boundary layer resistance, and revised cuticular resistance that is dependent on in-canopy NH3 concentration and RH at the leaf surface. This new bidirectional flux algorithm has been incorporated in an air quality modeling system, which also includes an implementation of a soil nitrification model.

  17. Anxiety and Sensory Over-Responsivity in Toddlers with Autism Spectrum Disorders: Bidirectional Effects across Time

    ERIC Educational Resources Information Center

    Green, Shulamite A.; Ben-Sasson, Ayelet; Soto, Timothy W.; Carter, Alice S.

    2012-01-01

    This report focuses on the emergence of and bidirectional effects between anxiety and sensory over-responsivity (SOR) in toddlers with autism spectrum disorders (ASD). Participants were 149 toddlers with ASD and their mothers, assessed at 2 annual time points. A cross-lag analysis showed that anxiety symptoms increased over time while SOR remained…

  18. ImageJ-MATLAB: a bidirectional framework for scientific image analysis interoperability.

    PubMed

    Hiner, Mark C; Rueden, Curtis T; Eliceiri, Kevin W

    2016-10-26

    ImageJ-MATLAB is a lightweight Java library facilitating bi-directional interoperability between MATLAB and ImageJ. By defining a standard for translation between matrix and image data structures, researchers are empowered to select the best tool for their image-analysis tasks.

  19. Bidirectional Associations in Multiplication Memory: Conditions of Negative and Positive Transfer

    ERIC Educational Resources Information Center

    Campbell, Jamie I. D.; Robert, Nicole D.

    2008-01-01

    A variety of experimental evidence indicates that the memory representation for multiplication facts (e.g., 6 [times] 9 = 54) incorporates bidirectional links with a forward association from factors to product and a reverse association from product to factors. Surprisingly, the authors did not find evidence in Experiment 1 of facilitative…

  20. Bidirectional Interference between Speech and Nonspeech Tasks in Younger, Middle-Aged, and Older Adults

    ERIC Educational Resources Information Center

    Bailey, Dallin J.; Dromey, Christopher

    2015-01-01

    Purpose: The purpose of this study was to examine divided attention over a large age range by looking at the effects of 3 nonspeech tasks on concurrent speech motor performance. The nonspeech tasks were designed to facilitate measurement of bidirectional interference, allowing examination of their sensitivity to speech activity. A cross-sectional…

  1. Bidirectional Influences between Maternal Parenting and Children's Peer Problems: A Longitudinal Monozygotic Twin Difference Study

    ERIC Educational Resources Information Center

    Yamagata, Shinji; Takahashi, Yusuke; Ozaki, Koken; Fujisawa, Keiko K.; Nonaka, Koichi; Ando, Juko

    2013-01-01

    This twin study examined the bidirectional relationship between maternal parenting behaviors and children's peer problems that were not confounded by genetic and family environmental factors. Mothers of 259 monozygotic twin pairs reported parenting behaviors and peer problems when twins were 42 and 48 months. Path analyses on monozygotic twin…

  2. Anxiety and Reading Difficulties in Early Elementary School: Evidence for Unidirectional- or Bi-Directional Relations?

    ERIC Educational Resources Information Center

    Grills-Taquechel, Amie E.; Fletcher, Jack M.; Vaughn, Sharon R.; Stuebing, Karla K.

    2012-01-01

    The present study examined competing models of the bi-directional influences of anxiety and reading achievement. Participants were 153 ethnically-diverse children (84 male, 69 female) from general education classes evaluated in the winter and spring of their first-grade academic year. Children completed standardized measures of reading achievement…

  3. Bidirectional Influences between Maternal and Paternal Parenting and Children's Disruptive Behaviour from Kindergarten to Grade 2

    ERIC Educational Resources Information Center

    Besnard, Therese; Verlaan, Pierrette; Davidson, Marilyne; Vitaro, Frank; Poulin, Francois; Capuano, France

    2013-01-01

    Empirical evidence suggests that children's disruptive behaviour (CDB) and quality of parenting influence one another bidirectionally. However, few studies have considered the separate contribution of the mother--child and father--child relationships to disruptive behaviours within a longitudinal context. Against this background, the reciprocal…

  4. Bidirectional electron anisotropies in the distant tail - ISEE 3 observations of polar rain

    NASA Technical Reports Server (NTRS)

    Baker, D. N.; Bame, S. J.; Feldman, W. C.; Gosling, J. T.; Zwickl, R. D.; Slavin, J. A.; Smith, E. J.

    1987-01-01

    A detailed observational treatment of bidirectional electrons (50 approx. 500 eV) in the distant magnetotail (or greater than or equal to 100 R sub E) is presented. It is found that electrons in this energy range commonly exhibit strong, field aligned anisotropies in the tail lobes. Because of large tail motions, the ISEE-3 data provide extensive sampling of both the north and south lobes in rapid succession, demonstrating directly the strong asymetries that exist between the north and south lobes at any one time. The bidirectional fluxes are found to occur predominantly in the lobe directy connected to the sunward IMF in the open magnetosphere model (north lobe for away sectors and south lobe for toward sectors). Electron anisotropy and magnetic field data are presented which show the transition from unidirectional (sheath) electron populations to bidirectional (lobe) populations. Taken together, the present evidence suggests that the bidirectional electrons that we observe in the distant tail are closely related to the Polar rain electrons observed previously at lower altitudes. Furthermore, these data provide strong evidence that the distant tail is comprised largely of open magnetic field lines in contra distinction to some recently advanced models.

  5. Observations of bi-directional leader development in a triggered lightning flash

    NASA Technical Reports Server (NTRS)

    Laroche, P.; Idone, V.; Eybert-Berard, A.; Barret, L.

    1991-01-01

    Observations of a modified form of rocket triggered lightning are described. A flash triggered during the summer of 1989 is studied as part of an effort to model bidirectional discharge. It is suggested that the altitude triggering technique provides a realistic means of studying the attachment process.

  6. Combined endocardiectomy and bidirectional glenn shunt for right ventricular endomyocardial fibrosis.

    PubMed

    Heredero, Angeles; Garcia-Vega, Maribel; Tomas, Marta; Cremades, Marta; Calderon, Pilar; Karagounis, Apostolos Paul; Aldamiz-Echevarria, Gonzalo

    2012-01-01

    We report the case of a young African woman with a history of right ventricular failure. Image studies suggested endomyocardial fibrosis affecting only the right side of the heart. The right ventricle was extremely small and restricted. The surgical approach entailed endocardectomy and a bidirectional cavopulmonary shunt to improve weaning off bypass and postoperative recovery, both of which were successfully achieved.

  7. DEVELOPMENT AND DEMONSTRATION OF A BIDIRECTIONAL ADVECTIVE FLUX METER FOR SEDIMENT-WATER INTERFACE

    EPA Science Inventory

    A bidirectional advective flux meter for measuring water transport across the sediment-water interface has been successfully developed and field tested. The flow sensor employs a heat-pulse technique combined with a flow collection funnel for the flow measurement. Because the dir...

  8. "Advances in Coupled Air Quality, Farm Management and Biogeochemistry to address bidirectional ammonia flux"

    EPA Science Inventory

    A cropland farm management modeling system for regional air quality and field-scale applications of bi-directional ammonia exchange was presented at ITM XXI. The goal of this research is to improve estimates of nitrogen deposition to terrestrial and aquatic ecosystems and ambien...

  9. Longitudinal Bi-Directional Relationships between Sleep and Youth Substance Use

    ERIC Educational Resources Information Center

    Pasch, Keryn E.; Latimer, Lara A.; Cance, Jessica Duncan; Moe, Stacey G.; Lytle, Leslie A.

    2012-01-01

    Despite the known deficits in sleep that occur during adolescence and the high prevalence of substance use behaviors among this group, relatively little research has explored how sleep and substance use may be causally related. The purpose of this study was to explore the longitudinal bi-directional relationships between sleep duration, sleep…

  10. A Common-Coding Account of the Bidirectional Evaluation-Behavior Link

    ERIC Educational Resources Information Center

    Eder, Andreas B.; Klauer, Karl Christoph

    2009-01-01

    Three experiments tested the influence of approach- and avoidance-related lever movements on the perception of masked affectively positive and negative stimuli. A motivational account of the bidirectional evaluation-behavior link predicted an enhanced detection of response-compatible stimuli, whereas a common-coding model predicted a reduced…

  11. MEASUREMENT OF BI-DIRECTIONAL AMMONIA FLUXES OVER SOYBEAN USING MODIFIED BOWEN-RATIO TECHNIQUE

    EPA Science Inventory

    Measurements of bi-directional ammonia exchange over a fertilized soybean canopy are presented for an 8-week period during the summer of 2002. The modified Bowne-ratio approach was used to determine fluxes from vertical NH3 and temperature gradients in combination with eddy covar...

  12. Diurnal patterns of the bi-directional reflectance of fresh-water ice

    NASA Technical Reports Server (NTRS)

    Leshkevich, George A.; Deering, Donald W.; Eck, Thomas F.; Ahmad, Suraiya P.

    1990-01-01

    To improve the interpretation of surface cryospheric albedo from satellite sensor data, diurnal measurements of the spectral bidirectional reflectance of a commonly found fresh water ice type were made, from which hemispherical reflectance can be derived. The purpose of this study is to document its clear-sky, bidirectional reflectance characteristics in the visible (650-670 nm) and near-infrared (810-840 nm) region, assess the diurnal nature of the reflectance, and quantify the surface anisotropy. Bidirectional reflectances of the refrozen slush ice measured show a spectral dependence and change significantly with solar zenith angle. Considerable variation occurs at each view angle and among view angles throughout the day. Although diurnal reflectance patterns were similar in both bands, magnitudes varied greatly, being highest in the visible and lowest in the near-infrared region. With the exception of peak saturated (specular) values in the forward scatter direction, bidirectional reflectance was generally highest in the morning when the surface and the illumination were most diffuse in character.

  13. Comparison of the One- and Bi-Direction Chained Equipercentile Equating

    ERIC Educational Resources Information Center

    Oh, Hyeonjoo; Moses, Tim

    2012-01-01

    This study investigated differences between two approaches to chained equipercentile (CE) equating (one- and bi-direction CE equating) in nearly equal groups and relatively unequal groups. In one-direction CE equating, the new form is linked to the anchor in one sample of examinees and the anchor is linked to the reference form in the other…

  14. Multispectral Resource Sampler: Proof of concept. Literature survey of bidirectional reflectance

    NASA Technical Reports Server (NTRS)

    1981-01-01

    A bibliography compiled in order to give a comprehensive review of previous work in scene bidirectional reflectance, particularly those studies relevant to the Multispectral Resource Sampler (MRS) is presented. The bibliography contains 124 abstracts. In addition a synthesis of the literature results is given along with background information concerning MRS.

  15. Bidirectional ventricular tachycardia due to coronary allograft vasculopathy a unique presentation.

    PubMed

    Bhavnani, Sanjeev P; Clyne, Christopher A

    2012-10-01

    Bidirectional ventricular tachycardia (BVT) is an uncommon type of polymorphic ventricular tachycardia (PVT) with alternating polarity of the QRS complex most commonly described digitalis toxicity. Recent data has demonstrated the possible molecular basis of this electrocardiographic phenomenon. To our knowledge this is the first reported case of BVT in a patient with orthotopic cardiac transplantation and coronary allograft vasculopathy.

  16. The Actor-Partner Interdependence Model: A Model of Bidirectional Effects in Developmental Studies

    ERIC Educational Resources Information Center

    Cook, William L.; Kenny, David A.

    2005-01-01

    The actor-partner interdependence model (APIM) is a model of dyadic relationships that integrates a conceptual view of interdependence with the appropriate statistical techniques for measuring and testing it. In this article we present the APIM as a general, longitudinal model for measuring bidirectional effects in interpersonal relationships. We…

  17. Risk Factors for Unidirectional and Bidirectional Intimate Partner Violence among Young Adults

    ERIC Educational Resources Information Center

    Renner, Lynette M.; Whitney, Stephen D.

    2012-01-01

    Objective: The purpose of this study was to identify common and unique risk factors for intimate partner violence (IPV) among young adults in relationships. Guided by two models of IPV, the same set of risk factors was used to examine outcomes of unidirectional (perpetration or victimization) and bidirectional (reciprocal) IPV separately for males…

  18. Bidirectional properties and utilizations of high-resolution spectra from a semiarid watershed

    NASA Astrophysics Data System (ADS)

    Qi, J.; Huete, A. R.; Cabot, F.; Chehbouni, A.

    1994-05-01

    A ground- and air-based high spectral resolution data set was collected during the summer Monsoon '90 experiment at the Walnut Gulch experimental watershed in southeastern Arizona for the purpose of (1) characterizing solar and view angle interactions on dry and wet season canopy spectra, and (2) exploring the use of multidirectional measurements to infer vegetation properties for semiarid watershed studies. Bidirectional reflectance factors were measured up to 40° off nadir with a spectroradiometer over a semidesert grassland site. High-spectral resolution aircraft data were collected over grass and desert shrub sites in order to investigate scaling effects. In this study, solar and view angle effects and interactions on canopy spectra varied with spectral wavelength as well as between dry and wet seasons. The solar zenith angle modified the view angle behavior of the bidirectional reflectance factors. In general, view angle influences and spectral signature contrasts were greatest at the larger solar zenith angles and similarly, Sun angle influences were more apparent at the larger view zenith angle. The scale dependency of the data was relatively minor. The bidirectional measurements were sufficiently characterized by a physically based bidirectional reflectance distribution function (BRDF) model. The parameters retrieved from the inversion of the BRDF model corresponded with observed vegetation variations.

  19. Bidirectional Linkages between Psychological Symptoms and Sexual Activities among African American Adolescent Girls in Psychiatric Care

    ERIC Educational Resources Information Center

    Starr, Lisa R.; Donenberg, Geri R.; Emerson, Erin

    2012-01-01

    The current study examines longitudinal associations between light and heavy sexual experiences and psychiatric symptoms in African American adolescent girls receiving mental health care. Research supports bidirectional associations between adolescent romantic and sexual behaviors and depression and other mental health problems, but this finding…

  20. The Persistence-Strengthening Effects of DRA: An Illustration of Bidirectional Translational Research

    ERIC Educational Resources Information Center

    Mace, F. Charles; McComas, Jennifer J.; Mauro, Benjamin C.; Progar, Patrick R.; Taylor, Bridget; Ervin, Ruth; Zangrillo, Amanda N.

    2009-01-01

    We summarize a series of bidirectional research studies that demonstrate the persistence-strengthening effects of differential reinforcement of alternative behavior on problem behavior. We model a possible solution to this problem with rats followed by replication with a human clinical population. The importance of coordinated basic and applied…

  1. Variable mode bi-directional and uni-directional computer communication system

    DOEpatents

    Cornett, Frank N.; Jenkins, Philip N.; Bowman, Terrance L.; Placek, Joseph M.; Thorson, Gregory M.

    2004-12-14

    A variable communication systems comprising a plurality of transceivers and a control circuit connected to the transceivers to configure the transceivers to operate in a bi-directional mode and a uni-directional mode at different times using different transfer methods to transfer data.

  2. Associative, Bidirectional Changes in Neural Signaling Utilizing NMDA Receptor- and Endocannabinoid-Dependent Mechanisms

    ERIC Educational Resources Information Center

    Li, Qin; Burrell, Brian D.

    2011-01-01

    Persistent, bidirectional changes in synaptic signaling (that is, potentiation and depression of the synapse) can be induced by the precise timing of individual pre- and postsynaptic action potentials. However, far less attention has been paid to the ability of paired trains of action potentials to elicit persistent potentiation or depression. We…

  3. A 30 Gb/s full-duplex bi-directional transmission optical wireless-over fiber integration system at W-band.

    PubMed

    Tang, Chanjuan; Yu, Jianjun; Li, Xinying; Chi, Nan; Xiao, Jiangnan; Tian, Yumin; Zhang, Junwen

    2014-01-13

    We propose and experimentally demonstrate a full-duplex bi-directional transmission optical wireless-over fiber integration system at W-band (75-100 GHz) with the speed up to 15 Gb/s for both 95.4 GHz link and 88.6 GHz link for the first time. The generation of millimeter-wave (mm-wave) wireless signal is based on the photonic technique by heterodyne mixing of an optical quadrature-phase-shift-keying (QPSK) signal with a free-running light at different wavelength. After 20 km fiber transmission, up to 30 Gb/s mm-wave signal is delivered over 2 m wireless link, and then converted to the optical signal for another 20 km fiber transmission. At the wireless receiver, coherent detection and advanced digital signal processing (DSP) are introduced to improve receiver sensitivity and system performance. With the OSNR of 15 dB, the bit error ratios (BERs) for 10 Gb/s signal transmission at 95.4 GHz and 88.6 GHz are below the forward-error-correction (FEC) threshold of 3.8 × 10(-3) whether post filter is used or not, while the BER for 15 Gb/s QPSK signal employing post filter in the link of 95.4 GHz is 2.9 × 10(-3).

  4. Performance analysis and comparison of a minimum interconnections direct storage model with traditional neural bidirectional memories.

    PubMed

    Bhatti, A Aziz

    2009-12-01

    This study proposes an efficient and improved model of a direct storage bidirectional memory, improved bidirectional associative memory (IBAM), and emphasises the use of nanotechnology for efficient implementation of such large-scale neural network structures at a considerable lower cost reduced complexity, and less area required for implementation. This memory model directly stores the X and Y associated sets of M bipolar binary vectors in the form of (MxN(x)) and (MxN(y)) memory matrices, requires O(N) or about 30% of interconnections with weight strength ranging between +/-1, and is computationally very efficient as compared to sequential, intraconnected and other bidirectional associative memory (BAM) models of outer-product type that require O(N(2)) complex interconnections with weight strength ranging between +/-M. It is shown that it is functionally equivalent to and possesses all attributes of a BAM of outer-product type, and yet it is simple and robust in structure, very large scale integration (VLSI), optical and nanotechnology realisable, modular and expandable neural network bidirectional associative memory model in which the addition or deletion of a pair of vectors does not require changes in the strength of interconnections of the entire memory matrix. The analysis of retrieval process, signal-to-noise ratio, storage capacity and stability of the proposed model as well as of the traditional BAM has been carried out. Constraints on and characteristics of unipolar and bipolar binaries for improved storage and retrieval are discussed. The simulation results show that it has log(e) N times higher storage capacity, superior performance, faster convergence and retrieval time, when compared to traditional sequential and intraconnected bidirectional memories.

  5. Bidirectional Associations Between Externalizing Behavior Problems and Maladaptive Parenting Within Parent-Son Dyads Across Childhood.

    PubMed

    Besemer, Sytske; Loeber, Rolf; Hinshaw, Stephen P; Pardini, Dustin A

    2016-10-01

    Coercive parent-child interaction models posit that an escalating cycle of negative, bidirectional interchanges influences the development of boys' externalizing problems and caregivers' maladaptive parenting over time. However, longitudinal studies examining this hypothesis have been unable to rule out the possibility that between-individual factors account for bidirectional associations between child externalizing problems and maladaptive parenting. Using a longitudinal sample of boys (N = 503) repeatedly assessed eight times across 6-month intervals in childhood (in a range between 6 and 13 years), the current study is the first to use novel within-individual change (fixed effects) models to examine whether parents tend to increase their use of maladaptive parenting strategies following an increase in their son's externalizing problems, or vice versa. These bidirectional associations were examined using multiple facets of externalizing problems (i.e., interpersonal callousness, conduct and oppositional defiant problems, hyperactivity/impulsivity) and parenting behaviors (i.e., physical punishment, involvement, parent-child communication). Analyses failed to support the notion that when boys increase their typical level of problem behaviors, their parents show an increase in their typical level of maladaptive parenting across the subsequent 6 month period, and vice versa. Instead, across 6-month intervals, within parent-son dyads, changes in maladaptive parenting and child externalizing problems waxed and waned in concert. Fixed effects models to address the topic of bidirectional relations between parent and child behavior are severely underrepresented. We recommend that other researchers who have found significant bidirectional parent-child associations using rank-order change models reexamine their data to determine whether these findings hold when examining changes within parent-child dyads.

  6. Bidirectional leader development in a preexisting channel as observed in rocket-triggered lightning flashes

    NASA Astrophysics Data System (ADS)

    Qie, Xiushu; Pu, Yunjiao; Jiang, Rubin; Sun, Zhuling; Liu, Mingyuan; Zhang, Hongbo; Li, Xun; Lu, Gaopeng; Tian, Ye

    2017-01-01

    Two cases of bidirectional leader, starting almost immediately below a decaying dart or dart-stepped leader which terminated before reaching the ground, were identified, for the first time, in rocket-triggered lightning flashes based on high-speed video, electric field changes, and channel base current, indicating that a bidirectional leader can be excited by a decayed dart leader and propagate in a preexisting discharge channel. The positive end of the bidirectional leader moved upward along the terminated downward dart leader path, and the negative end extended downward along the decayed initial continuous current or preceding stroke path to the ground and culminated in a return stroke. The positive leader propagated with an average speed of 1.3 × 106 m/s and 2.2 × 106 m/s in the two cases, roughly twice as fast as its negative counterpart with speed of 7.8 × 105 m/s and 1.0 × 106 m/s, respectively. The positive end started earlier than the negative end with a preceding time less than 40.3 µs. The bidirectional leader can be regarded as a recoil leader with the positive end retrogressing along a negative leader channel, whose polarity is contrary to the traditional recoil leader with negative leader end retrogressing along an existing positive leader channel. Weak luminosity was continuously observed during the terminated dart leader and bidirectional leader stage, but the channel current was less than the minimum detection capability of 9.3 A.

  7. Assessment of ceramic membrane filters

    SciTech Connect

    Ahluwalia, R.K.; Geyer, H.K.; Im, K.H.

    1995-08-01

    The objectives of this project include the development of analytical models for evaluating the fluid mechanics of membrane coated, dead-end ceramic filters, and to determine the effects of thermal and thermo-chemical aging on the material properties of emerging ceramic hot gas filters. A honeycomb cordierite monolith with a thin ceramic coating and a rigid candle filter were evaluated.

  8. Quick-change filter cartridge

    DOEpatents

    Rodgers, John C.; McFarland, Andrew R.; Ortiz, Carlos A.

    1995-01-01

    A quick-change filter cartridge. In sampling systems for measurement of airborne materials, a filter element is introduced into the sampled airstream such that the aerosol constituents are removed and deposited on the filter. Fragile sampling media often require support in order to prevent rupture during sampling, and careful mounting and sealing to prevent misalignment, tearing, or creasing which would allow the sampled air to bypass the filter. Additionally, handling of filter elements may introduce cross-contamination or exposure of operators to toxic materials. Moreover, it is desirable to enable the preloading of filter media into quick-change cartridges in clean laboratory environments, thereby simplifying and expediting the filter-changing process in the field. The quick-change filter cartridge of the present invention permits the application of a variety of filter media in many types of instruments and may also be used in automated systems. The cartridge includes a base through which a vacuum can be applied to draw air through the filter medium which is located on a porous filter support and held there by means of a cap which forms an airtight seal with the base. The base is also adapted for receiving absorbing media so that both particulates and gas-phase samples may be trapped for investigation, the latter downstream of the aerosol filter.

  9. Drive Diagnostic Filter Wheel Control

    SciTech Connect

    Uhlich, D.

    2007-07-17

    DrD Filter Wheel Control is National Instrument's Labview software that drives a Drive Diagnostic filter wheel. The software can drive the filter wheel between each end limit, detect the positive and negative limit and each home position and post the stepper motot values to an Excel spreadsheet. The software can also be used to cycle the assembly between the end limits.

  10. Drilling fluid filter

    DOEpatents

    Hall, David R.; Fox, Joe; Garner, Kory

    2007-01-23

    A drilling fluid filter for placement within a bore wall of a tubular drill string component comprises a perforated receptacle with an open end and a closed end. A hanger for engagement with the bore wall is mounted at the open end of the perforated receptacle. A mandrel is adjacent and attached to the open end of the perforated receptacle. A linkage connects the mandrel to the hanger. The linkage may be selected from the group consisting of struts, articulated struts and cams. The mandrel operates on the hanger through the linkage to engage and disengage the drilling fluid filter from the tubular drill string component. The mandrel may have a stationary portion comprising a first attachment to the open end of the perforated receptacle and a telescoping adjustable portion comprising a second attachment to the linkage. The mandrel may also comprise a top-hole interface for top-hole equipment.

  11. Dichroic ultraviolet light filters

    NASA Astrophysics Data System (ADS)

    Kocher, Christoph; Weder, Christoph; Smith, Paul

    2003-10-01

    With the intention to produce dichroic filters for use in photoluminescent systems that rely on polarized UV light, we synthesized a number of linear, dichroic dyes, which absorb mainly in the near-UV range of the electromagnetic spectrum. These dyes were designed for compatibility with common thermoplastic polymers such as linear low-density poly(ethylene), poly(ethylene terephthalate), and polyamide-12. Films of these host polymers that consisted of 0.2% by weight of various dichroic UV dyes were produced by common melt-processing schemes. Uniaxial drawing of these films yielded highly dichroic UV filters with dichroic ratios in absorption that in some cases exceeded 100. The fact that these free-standing films display little or no coloration and are environmentally stable makes them useful for various applications that involve generation of polarized UV light.

  12. Filtered cathodic arc source

    DOEpatents

    Falabella, S.; Sanders, D.M.

    1994-01-18

    A continuous, cathodic arc ion source coupled to a macro-particle filter capable of separation or elimination of macro-particles from the ion flux produced by cathodic arc discharge is described. The ion source employs an axial magnetic field on a cathode (target) having tapered sides to confine the arc, thereby providing high target material utilization. A bent magnetic field is used to guide the metal ions from the target to the part to be coated. The macro-particle filter consists of two straight solenoids, end to end, but placed at 45[degree] to one another, which prevents line-of-sight from the arc spot on the target to the parts to be coated, yet provides a path for ions and electrons to flow, and includes a series of baffles for trapping the macro-particles. 3 figures.

  13. Filtered cathodic arc source

    DOEpatents

    Falabella, Steven; Sanders, David M.

    1994-01-01

    A continuous, cathodic arc ion source coupled to a macro-particle filter capable of separation or elimination of macro-particles from the ion flux produced by cathodic arc discharge. The ion source employs an axial magnetic field on a cathode (target) having tapered sides to confine the arc, thereby providing high target material utilization. A bent magnetic field is used to guide the metal ions from the target to the part to be coated. The macro-particle filter consists of two straight solenoids, end to end, but placed at 45.degree. to one another, which prevents line-of-sight from the arc spot on the target to the parts to be coated, yet provides a path for ions and electrons to flow, and includes a series of baffles for trapping the macro-particles.

  14. Chaos pass filter: linear response of synchronized chaotic systems.

    PubMed

    Zeeb, Steffen; Kestler, Johannes; Kanter, Ido; Kinzel, Wolfgang

    2013-04-01

    The linear response of synchronized time-delayed chaotic systems to small external perturbations, i.e., the phenomenon of chaos pass filter, is investigated for iterated maps. The distribution of distances, i.e., the deviations between two synchronized chaotic units due to external perturbations on the transferred signal, is used as a measure of the linear response. It is calculated numerically and, for some special cases, analytically. Depending on the model parameters this distribution has power law tails in the region of synchronization leading to diverging moments of distances. This is a consequence of multiplicative and additive noise in the corresponding linear equations due to chaos and external perturbations. The linear response can also be quantified by the bit error rate of a transmitted binary message which perturbs the synchronized system. The bit error rate is given by an integral over the distribution of distances and is calculated analytically and numerically. It displays a complex nonmonotonic behavior in the region of synchronization. For special cases the distribution of distances has a fractal structure leading to a devil's staircase for the bit error rate as a function of coupling strength. The response to small harmonic perturbations shows resonances related to coupling and feedback delay times. A bidirectionally coupled chain of three units can completely filter out the perturbation. Thus the second moment and the bit error rate become zero.

  15. Tunable Microwave Transversal Filters.

    DTIC Science & Technology

    1984-05-01

    GOVT ACCESSION NO. 3. RECIPIENT’S CATALOG NUMBER AFOSR-TR. 84-0977 S4. TI TLE (and Subtitle) 5. TYP ?FE&T&PEO OEE U!NABLE MICROWAVE TRANSVERSAL FILTERS...this goal through magnetostatic waves MSW propagating at microwave frequency in magnetically biased, liquid phase epitaxial films of yttrium iron...garnet (YIG) grown on gadolinium gallium garnet (GGG). This technology has a number of advantages; low loss (greater than 30db/usec at xband), tunable by

  16. Regenerable particulate filter

    DOEpatents

    Stuecker, John N.; Cesarano, III, Joseph; Miller, James E.

    2009-05-05

    A method of making a three-dimensional lattice structure, such as a filter used to remove particulates from a gas stream, where the physical lattice structure is designed utilizing software simulation from pre-defined mass transfer and flow characteristics and the designed lattice structure is fabricated using a free-form fabrication manufacturing technique, where the periodic lattice structure is comprised of individual geometric elements.

  17. Digital Filter Design Techniques.

    DTIC Science & Technology

    1988-03-01

    McClellan, and the Minimum p - Error IIR Filter Design Method of Deczky. Acceso Fo S CRA&!I DIC TAd [8 13v i . , . a.- II **’. . ’uaJI r -TABLE OF ,CONTENT...NFILT-- FILTE LENGTH C dUYPE-- TYPE OF FILIP C I MULTIPLE PASSbAND/STOPHASZ P11151 C =DIYFEZlNTIATCP C 3 HILBEET DANSFCRZ PELTE2 C NiANDS-- NUEBEi Of

  18. Improvement in birefringent filters. IV - The alternate partial polarizer filter

    NASA Technical Reports Server (NTRS)

    Title, A. M.

    1976-01-01

    The design and performance of a birefringent filter with alternate partial polarizers are analyzed. The properties of several filter configurations with imperfect intermediate polarizers are examined. It is shown that such filters have significant advantages in transmission and profile shape over both the standard Lyot and the contrast element Lyot filters. These theoretical advantages are demonstrated by the measured properties of an actual filter using the alternate partial polarizer (APP) design. This filter is a four-module eight-crystal APP device which has been built using Polaroid HN-38 for the perfect polarizers and two laminated sheets of HN-55 for the partial polarizers. The measured characteristics of the filter are found to be in good agreement with theory.

  19. Carbon nanotube filters

    NASA Astrophysics Data System (ADS)

    Srivastava, A.; Srivastava, O. N.; Talapatra, S.; Vajtai, R.; Ajayan, P. M.

    2004-09-01

    Over the past decade of nanotube research, a variety of organized nanotube architectures have been fabricated using chemical vapour deposition. The idea of using nanotube structures in separation technology has been proposed, but building macroscopic structures that have controlled geometric shapes, density and dimensions for specific applications still remains a challenge. Here we report the fabrication of freestanding monolithic uniform macroscopic hollow cylinders having radially aligned carbon nanotube walls, with diameters and lengths up to several centimetres. These cylindrical membranes are used as filters to demonstrate their utility in two important settings: the elimination of multiple components of heavy hydrocarbons from petroleum-a crucial step in post-distillation of crude oil-with a single-step filtering process, and the filtration of bacterial contaminants such as Escherichia coli or the nanometre-sized poliovirus (~25 nm) from water. These macro filters can be cleaned for repeated filtration through ultrasonication and autoclaving. The exceptional thermal and mechanical stability of nanotubes, and the high surface area, ease and cost-effective fabrication of the nanotube membranes may allow them to compete with ceramic- and polymer-based separation membranes used commercially.

  20. Binomial Gaussian mixture filter

    NASA Astrophysics Data System (ADS)

    Raitoharju, Matti; Ali-Löytty, Simo; Piché, Robert

    2015-12-01

    In this work, we present a novel method for approximating a normal distribution with a weighted sum of normal distributions. The approximation is used for splitting normally distributed components in a Gaussian mixture filter, such that components have smaller covariances and cause smaller linearization errors when nonlinear measurements are used for the state update. Our splitting method uses weights from the binomial distribution as component weights. The method preserves the mean and covariance of the original normal distribution, and in addition, the resulting probability density and cumulative distribution functions converge to the original normal distribution when the number of components is increased. Furthermore, an algorithm is presented to do the splitting such as to keep the linearization error below a given threshold with a minimum number of components. The accuracy of the estimate provided by the proposed method is evaluated in four simulated single-update cases and one time series tracking case. In these tests, it is found that the proposed method is more accurate than other Gaussian mixture filters found in the literature when the same number of components is used and that the proposed method is faster and more accurate than particle filters.

  1. Digital matched filter ASIC

    NASA Astrophysics Data System (ADS)

    Magill, D. T.; Edwards, G.

    The architecture of a digital matched filter (DMF) and the selected technology used is described. The characteristics of the DMF ASIC are summarized in tabular form. Three architectures are considered for the implementation of a DMF ASIC. First, there is the conventional trapped delay line architecture which requires a large adder tree. The second architecture is the systolic array DMF which consists of a number of identical stages cascaded together. The third architecture is the bank-of-correlators DMF, in which the reference code is recirculated around through the delay line. Since the objective is to maximize the length of the DMF, the tapped delay line architecture is selected. The tapped delay form is designed to support BPSK, QPSK, and OQPSK chip modulation. Matched filter lengths of up to 256 chips can be supported by cascading 4 ASICs. The DMF is designed as a gate array using an advanced double metal, 1.5 micron CMOS process. The regularity of FIR filter architecture allows the core of the device to be laid out very compactly, resulting in efficient usage of the gate array.

  2. Carbon nanotube filters.

    PubMed

    Srivastava, A; Srivastava, O N; Talapatra, S; Vajtai, R; Ajayan, P M

    2004-09-01

    Over the past decade of nanotube research, a variety of organized nanotube architectures have been fabricated using chemical vapour deposition. The idea of using nanotube structures in separation technology has been proposed, but building macroscopic structures that have controlled geometric shapes, density and dimensions for specific applications still remains a challenge. Here we report the fabrication of freestanding monolithic uniform macroscopic hollow cylinders having radially aligned carbon nanotube walls, with diameters and lengths up to several centimetres. These cylindrical membranes are used as filters to demonstrate their utility in two important settings: the elimination of multiple components of heavy hydrocarbons from petroleum-a crucial step in post-distillation of crude oil-with a single-step filtering process, and the filtration of bacterial contaminants such as Escherichia coli or the nanometre-sized poliovirus ( approximately 25 nm) from water. These macro filters can be cleaned for repeated filtration through ultrasonication and autoclaving. The exceptional thermal and mechanical stability of nanotubes, and the high surface area, ease and cost-effective fabrication of the nanotube membranes may allow them to compete with ceramic- and polymer-based separation membranes used commercially.

  3. Bidirectional fiber-wireless and fiber-VLLC transmission system based on an OEO-based BLS and a RSOA.

    PubMed

    Lu, Hai-Han; Li, Chung-Yi; Lu, Ting-Chien; Wu, Chang-Jen; Chu, Chien-An; Shiva, Ajay; Mochii, Takao

    2016-02-01

    A bidirectional fiber-wireless and fiber-visible-laser-light-communication (VLLC) transmission system based on an optoelectronic oscillator (OEO)-based broadband light source (BLS) and a reflective semiconductor optical amplifier (RSOA) is proposed and experimentally demonstrated. Through an in-depth observation of such bidirectional fiber-wireless and fiber-VLLC transmission systems, good bit error rate performances are obtained over a 40 km single-mode fiber and a 10 m RF/optical wireless transport. Such a bidirectional fiber-wireless and fiber-VLLC transmission system is an attractive option for providing broadband integrated services.

  4. COBE experience with filter QUEST

    NASA Technical Reports Server (NTRS)

    Filla, O.; Keat, J.; Chu, D.

    1991-01-01

    A gyro based filter variation on the standard QUEST attitude determination algorithm is applied to the Cosmic Background Explorer (COBE). Filter QUEST is found to be three times as fast as the batch estimator and slightly more accurate than regular QUEST. Perhaps more important than its speed or accuracy is the fact that Filter QUEST can provide real time attitude solutions when regular QUEST cannot, due to lack of observability. Filter QUEST is also easy to use and adjust for the proper memory length. Suitable applications for Filter QUEST include coarse and real time attitude determination.

  5. Filtering information from human experts

    NASA Technical Reports Server (NTRS)

    Mendel, Max B.; Sheridan, Thomas B.

    1989-01-01

    The authors propose a model, or filter, for debiasing opinions from multiple experts and combining them into a single consistent estimate of some variable of interest. A distinguishing feature of the approach consists of making the calibration of experts an integral part of filtering. This enables the filter to learn from previous experience with the experts. The theoretical development takes a Bayesian perspective, using de Finetti's (1964) notion of exchangeability. Experimental results with a preliminary computer implementation of the filter show that its estimates are better than those from comparable filters that do not involve calibration.

  6. Characterization and field use of a CCD camera system for retrieval of bidirectional reflectance distribution function

    NASA Astrophysics Data System (ADS)

    Nandy, P.; Thome, K.; Biggar, S.

    2001-06-01

    Vicarious calibration and field validation is a critical aspect of NASA's Earth Observing System program. As part of calibration and validation research related to this project, the Remote Sensing Group (RSG) of the Optical Science Center at the University of Arizona has developed an imaging radiometer for ground-based measurements of directional reflectance. The system relies on a commercially available 1024×1024 pixel, silicon CCD array. Angular measurements are accomplished using a fish-eye lens that has a full 180° field of view with each pixel on the CCD array having a nominal 0.2° field of view. Spectral selection is through four interference filters centered at 470, 575, 660, and 835 nm. The system is designed such that the entire 180° field is collected at one time with a complete multispectral data set collected in under 2 min. The results of laboratory experiments have been used to determine the gain and offset of each detector element as well as the effects of the lens on the system response. Measurements of a stable source using multiple integration times and at multiple distances for a set integration time indicate the system is linear to better than 0.5% over the upper 88% of the dynamic range of the system. The point spread function (PSF) of the lens system was measured for several field angles, and the signal level was found to fall to less than 1% of the peak signal within 1.5° for the on-axis case. The effect of this PSF on the retrieval of modeled BRDFs is shown to be less than 0.2% out to view angles of 70°. The degree of polarization of the system is shown to be negligible for on-axis imaging but to have up to a 20% effect at a field angle of 70°. The effect of the system polarization on the retrieval of modeled BRDFs is shown to be up to 3% for field angles of 70° off nadir and with a solar zenith angle of 70°. Field measurements are made by mounting the camera to a boom mounted to a large tripod that is aligned toward south. This

  7. In-service filter testing

    SciTech Connect

    Terada, K.; Woodard, R.W.; Jensen, R.T.

    1985-04-29

    This report contains the observations, test results, and conclusions of three separate in-service tests beginning in November 1979 and concluding in September 1983. The in-service tests described in this report produced encouraging results on filters constructed with fiberglass medium containing 5% Nomex and separators of aluminum foil coated with a thin film of vinyl-epoxy polymer. Filters containing medium with Kevlar fiber additives demonstrated they merited further evaluation. Other types of filters tested include separatorless filters (Flanders SuperFlow) and one filter with fiberglass separators. Asbestos-containing filters were used for comparison until their supply was exhausted. All filters tested were judged to have performed satisfactorily under the test conditions.

  8. Air Sampling Filter

    NASA Technical Reports Server (NTRS)

    1980-01-01

    General Metal Works' Accu-Vol is a high-volume air sampling system used by many government agencies to monitor air quality for pollution control purposes. Procedure prevents possible test-invalidating contamination from materials other than particulate pollutants, caused by manual handling or penetration of windblown matter during transit, a cassette was developed in which the filter is sealed within a metal frame and protected in transit by a snap-on aluminum cover, thus handled only under clean conditions in the laboratory.

  9. Advances in Collaborative Filtering

    NASA Astrophysics Data System (ADS)

    Koren, Yehuda; Bell, Robert

    The collaborative filtering (CF) approach to recommenders has recently enjoyed much interest and progress. The fact that it played a central role within the recently completed Netflix competition has contributed to its popularity. This chapter surveys the recent progress in the field. Matrix factorization techniques, which became a first choice for implementing CF, are described together with recent innovations. We also describe several extensions that bring competitive accuracy into neighborhood methods, which used to dominate the field. The chapter demonstrates how to utilize temporal models and implicit feedback to extend models accuracy. In passing, we include detailed descriptions of some the central methods developed for tackling the challenge of the Netflix Prize competition.

  10. Robust Kriged Kalman Filtering

    SciTech Connect

    Baingana, Brian; Dall'Anese, Emiliano; Mateos, Gonzalo; Giannakis, Georgios B.

    2015-11-11

    Although the kriged Kalman filter (KKF) has well-documented merits for prediction of spatial-temporal processes, its performance degrades in the presence of outliers due to anomalous events, or measurement equipment failures. This paper proposes a robust KKF model that explicitly accounts for presence of measurement outliers. Exploiting outlier sparsity, a novel l1-regularized estimator that jointly predicts the spatial-temporal process at unmonitored locations, while identifying measurement outliers is put forth. Numerical tests are conducted on a synthetic Internet protocol (IP) network, and real transformer load data. Test results corroborate the effectiveness of the novel estimator in joint spatial prediction and outlier identification.

  11. Charcoal filter testing

    SciTech Connect

    Lyons, J.

    1997-08-01

    In this very brief, informal presentation, a representative of the US Nuclear Regulatory Commission outlines some problems with charcoal filter testing procedures and actions being taken to correct the problems. Two primary concerns are addressed: (1) the process to find the test method is confusing, and (2) the requirements of the reference test procedures result in condensation on the charcoal and causes the test to fail. To address these problems, emergency technical specifications were processed for three nuclear plants. A generic or an administrative letter is proposed as a more permanent solution. 1 fig.

  12. On Filtered Binary Processes.

    DTIC Science & Technology

    1984-11-01

    BINARY PROCESSES 12. PERSONAL AUTHOR(S) R.F. Pawula and S.O. Rice 13s. TYPE OF REPORT 13b. TIME COVERED.!14 DATE OF REPORT MY,, o.. Day) 15. PAGE COUNT...APR EDITION OF I JAN 73 IS OBSOLETE. UNCLASSIFIED SECURITY CLASSIFICATION OF THIS PAGE eO R.TR. 85-0055 On Filtered Binary Processes R . F. Pawula ...is authorized to reproduce and distribute reprints for governmental purposes notwithstanding any copyright notation ",."/ hereon. R. F. Pawula is with

  13. Multilevel ensemble Kalman filtering

    DOE PAGES

    Hoel, Hakon; Law, Kody J. H.; Tempone, Raul

    2016-06-14

    This study embeds a multilevel Monte Carlo sampling strategy into the Monte Carlo step of the ensemble Kalman filter (EnKF) in the setting of finite dimensional signal evolution and noisy discrete-time observations. The signal dynamics is assumed to be governed by a stochastic differential equation (SDE), and a hierarchy of time grids is introduced for multilevel numerical integration of that SDE. Finally, the resulting multilevel EnKF is proved to asymptotically outperform EnKF in terms of computational cost versus approximation accuracy. The theoretical results are illustrated numerically.

  14. Advances in Support of the CMAQ Bidirectional Science Option for the Estimation of Ammonia Flux from Agricultural cropland

    EPA Science Inventory

    Proposed Session: Emissions Inventories, Models and processes: Last year a new CMAQ bidirectional option for the estimation of ammonia flux (emission and deposition) was released. This option essentially replaces NEI crop ammonia emissions with emissions calculated dynamically...

  15. A light-switchable bidirectional expression module allowing simultaneous regulation of multiple genes.

    PubMed

    Chen, Xianjun; Li, Ting; Wang, Xue; Yang, Yi

    2015-10-02

    Several light-regulated genetic circuits have been applied to spatiotemporally control transgene expression in mammalian cells. However, simultaneous regulation of multiple genes using one genetic device by light has not yet been reported. In this study, we engineered a bidirectional expression module based on LightOn system. Our data showed that both reporter genes could be regulated at defined and quantitative levels. Simultaneous regulation of four genes was further achieved in cultured cells and mice. Additionally, we successfully utilized the bidirectional expression module to monitor the expression of a suicide gene, showing potential for photodynamic gene therapy. Collectively, we provide a robust and useful tool to simultaneously control multiple genes expression by light, which will be widely used in biomedical research and biotechnology.

  16. A Novel User Created Message Application Service Design for Bidirectional TPEG

    NASA Astrophysics Data System (ADS)

    Lee, Sang-Hee; Jo, Kang-Hyun

    The T-DMB (Terrestrial-Digital Multimedia Broadcasting) is the national service, currently successful in use in Korea since 2008. Among other services, TPEG (Transport Protocol Experts Group) service has been spotlighted in the aspects of creating earnings. At present, TPEG service is not so popular as it fails to satisfy the user’s demands on various aspects. Thus, the variety of services including bidirectional service is necessary in stage of DMB2.0. In this paper, the limitations of existing TPEG-POI (Point of Interest) application service using the wireless communication network are indicated. To overcome such limitations, we propose a business model for TPEG-UCM (User Created Message) application service which uses individual bidirectional media. The experiment shown in this paper proves the usability and operability of the proposed method, suggesting that the implementation of the proposed method would be overcome a lack of variety and unidirectional of existing TPEG application.

  17. Consistency of Earth Radiation Budget Experiment bidirectional models and the observed anisotropy of reflected sunlight

    NASA Technical Reports Server (NTRS)

    Baldwin, Daniel G.; Coakley, James A., Jr.

    1991-01-01

    The anisotropy of the radiance field estimated from bidirectional models derived from Nimbus 7 ERB scanner data is compared with the anisotropy observed with the ERB Experiment (ERBE) scanner aboard the ERB satellite. The results of averaging over groups of 40 ERBE scanner scan lines for a period of a month revealed significant differences between the modeled and the observed anisotropy for given scene types and the sun-earth-satellite viewing geometries. By comparing the radiative fluxes derived using the observed anisotropy with those derived assuming isotropic reflection, it is concluded that a reasonable estimate for the maximum error due to the use of incorrect bidirectional models is a bias of about 4 percent for a typical 2.5 deg latitude-longitude monthly mean, and an rms error of 15 percent.

  18. Effects of aerosols and surface shadowing on bidirectional reflectance measurements of deserts

    NASA Technical Reports Server (NTRS)

    Bowker, David E.; Davis, Richard E.

    1987-01-01

    Desert surfaces are probably one of the most stable of the Earth's natural targets for remote sensing. The bidirectional reflectance properties of the Saudi Arabian desert was investigated during the Summer Monsoon Experiment (Summer Monex). A comparison of high-altitude with near-surface measurements of the White Sands desert showed significant differences. These discrepancies have been attributed to forward scattering of the dust-laden atmosphere prevalent during Summer Monex. This paper is concerned in general with modeling the effects of atmospheric aerosols and surface shadowing on the remote sensing of bidirectional reflectance factors of desert targets, and in particular with comparing the results of these models with flight results. Although it is possible to approximate the latter, it is felt that a surface reflectance model with a smaller specular component would have permitted using a more realistic set of atmospheric conditions in the simulations.

  19. Spatial fluctuations of pedestrian velocities in bidirectional streams: Exploring the effects of self-organization

    NASA Astrophysics Data System (ADS)

    Saberi, Meead; Aghabayk, Kayvan; Sobhani, Amir

    2015-09-01

    Individual pedestrian velocities vary over time and space depending on the crowd size, location of individuals' within the crowd, and formation of self-organized lanes. We use empirical data to explore the spatial fluctuations of pedestrian velocities in bidirectional streams. We find that, unlike ordinary fluids, the velocity profile in bidirectional pedestrian streams does not necessarily follow a hyperbolic form. Rather, the shape of the velocity profile is highly dependent on the formation of self-organized lanes. We also show that the spatial fluctuations of pedestrian velocities along and transverse to the flow direction are widely distributed and can be modeled by a sum of Gaussian distributions. Results suggest that the effect of self-organization phenomenon is strong enough that for the same crowd size, the velocity distribution does not significantly change when pedestrians are highly mixed compared to when separate lanes are formed.

  20. Finite-Time Stability for Fractional-Order Bidirectional Associative Memory Neural Networks with Time Delays

    NASA Astrophysics Data System (ADS)

    Xu, Chang-Jin; Li, Pei-Luan; Pang, Yi-Cheng

    2017-02-01

    This paper is concerned with fractional-order bidirectional associative memory (BAM) neural networks with time delays. Applying Laplace transform, the generalized Gronwall inequality and estimates of Mittag–Leffler functions, some sufficient conditions which ensure the finite-time stability of fractional-order bidirectional associative memory neural networks with time delays are obtained. Two examples with their simulations are given to illustrate the theoretical findings. Our results are new and complement previously known results. Supported by National Natural Science Foundation of China under Grant Nos.~61673008, 11261010, 11101126, Project of High–Level Innovative Talents of Guizhou Province ([2016]5651), Natural Science and Technology Foundation of Guizhou Province (J[2015]2025 and J[2015]2026), 125 Special Major Science and Technology of Department of Education of Guizhou Province ([2012]011) and Natural Science Foundation of the Education Department of Guizhou Province (KY[2015]482)

  1. Bidirectional Synaptic Structural Plasticity after Chronic Cocaine Administration Occurs through Rap1 Small GTPase Signaling.

    PubMed

    Cahill, Michael E; Bagot, Rosemary C; Gancarz, Amy M; Walker, Deena M; Sun, HaoSheng; Wang, Zi-Jun; Heller, Elizabeth A; Feng, Jian; Kennedy, Pamela J; Koo, Ja Wook; Cates, Hannah M; Neve, Rachael L; Shen, Li; Dietz, David M; Nestler, Eric J

    2016-02-03

    Dendritic spines are the sites of most excitatory synapses in the CNS, and opposing alterations in the synaptic structure of medium spiny neurons (MSNs) of the nucleus accumbens (NAc), a primary brain reward region, are seen at early versus late time points after cocaine administration. Here we investigate the time-dependent molecular and biochemical processes that regulate this bidirectional synaptic structural plasticity of NAc MSNs and associated changes in cocaine reward in response to chronic cocaine exposure. Our findings reveal key roles for the bidirectional synaptic expression of the Rap1b small GTPase and an associated local synaptic protein translation network in this process. The transcriptional mechanisms and pathway-specific inputs to NAc that regulate Rap1b expression are also characterized. Collectively, these findings provide a precise mechanism by which nuclear to synaptic interactions induce "metaplasticity" in NAc MSNs, and we reveal the specific effects of this plasticity on reward behavior in a brain circuit-specific manner.

  2. Examination of a PHEV Bi-Directional Charger System for V2G Reactive Power Compensation

    SciTech Connect

    Kisacikoglu, Mithat C; Ozpineci, Burak; Tolbert, Leon M

    2010-01-01

    Plug-in hybrid electric vehicles (PHEVs) potentially have the capability to fulfill the energy storage needs of the electric grid by supplying ancillary services such as reactive power compensation. However, in order to allow bidirectional power transfer, the PHEV battery charger should be designed to manage such capability. While many different battery chargers have been available since the inception of the first electric vehicles (EVs), an on-board, conductive charger with bidirectional power transferring capability have recently drawn attention due to their inherent advantages in charging accessibility, ease of use and efficiency. In this study, a reactive power compensation case study using the inverter dc-link capacitor is given when a PHEV battery is under charging operation. Finally, the impact of providing these services on the batteries is also explained.

  3. Design and manufacturability tradeoffs in unidirectional and bidirectional standard cell layouts in 14 nm node

    NASA Astrophysics Data System (ADS)

    Vaidyanathan, Kaushik; Ng, Siew Hoon; Morris, Daniel; Lafferty, Neal; Liebmann, Lars; Bender, Mitchell; Huang, Wenbin; Lai, Kafai; Pileggi, Larry; Strojwas, Andrzej

    2012-03-01

    The 14 nm node is seeing the dominant use of three-dimensional FinFET architectures, local interconnects, multiple patterning processes and restricted design rules. With the adoption of these new process technologies and design styles, it becomes necessary to rethink the standard cell library design methodologies that proved successful in the past. In this paper, we compare the design efficiency and manufacturability of standard cell libraries that use either unidirectional or bidirectional Metal 1. In contrast to previous nodes, a 14 nm 9-track unidirectional standard cell layout results in up to 20% lower energy-delay-area product as compared to the 9-track bidirectional standard cell layout. Manufacturability assessment shows that the unidirectional standard cell layouts save one exposure on Metal 1, reduces process variability by 10% and layout construct count by 2-3X. As a result, the unidirectional standard cell layout could serve as a key enabler for affordable scaling.

  4. The bidirectional relationship between exercise and sleep: Implications for exercise adherence and sleep improvement.

    PubMed

    Kline, Christopher E

    2014-01-01

    Exercise has long been associated with better sleep, and evidence is accumulating on the efficacy of exercise as a nonpharmacologic treatment option for disturbed sleep. Recent research, however, has noted that poor sleep may contribute to low physical activity levels, emphasizing a robust bidirectional relationship between exercise and sleep. This article will briefly review the evidence supporting the use of exercise as a nonpharmacologic treatment for sleep disturbance, outline future research that is needed to establish the viability of exercise as a behavioral sleep treatment, describe recent research that has emphasized the potential influence of poor sleep on daytime activity levels, and discuss whether improving sleep may facilitate adoption and/or better adherence to a physically active lifestyle. With poor sleep and physical inactivity each recognized as key public health priorities, additional research into the bidirectional relationship between exercise and sleep has significant implications for facilitating greater exercise adherence and improving sleep in society.

  5. Bidirectional reflectance measurement of zinc oxide in 0.25 to 2.5 microns spectrum

    NASA Technical Reports Server (NTRS)

    Scott, R. L., Jr.

    1974-01-01

    An experimental apparatus was designed and used to measure the bidirectional reflectance of zinc oxide in the spectrum 0.25 to 2.5 microns. The nonspecular reflectance is essentially Lambert for wavelengths above 0.40 microns with the most deviation occuring for large source zenith angles. Below 0.400 microns the nonspecular reflectance is greater than Lambert in all directions and is greatest in the forward and backscatter directions. The ratio of the specular component to the nonspecular component at a zenith of 0 degrees was found to increase with source zenith and wavelength for wavelengths above 0.400 microns. Below 0.400 microns this ratio increases as wavelengths decrease. The variation of bidirectional reflectance with wavelength was found to have the characteristics absorption for Zn0 for wavelength below 0.400 microns.

  6. Cost-effective bidirectional digitized radio-over-fiber systems employing sigma delta modulation

    NASA Astrophysics Data System (ADS)

    Lee, Kyung Woon; Jung, HyunDo; Park, Jung Ho

    2016-11-01

    We propose a cost effective digitized radio-over-fiber (D-RoF) system employing a sigma delta modulation (SDM) and a bidirectional transmission technique using phase modulated downlink and intensity modulated uplink. SDM is transparent to different radio access technologies and modulation formats, and more suitable for a downlink of wireless system because a digital to analog converter (DAC) can be avoided at the base station (BS). Also, Central station and BS share the same light source by using a phase modulation for the downlink and an intensity modulation for the uplink transmission. Avoiding DACs and light sources have advantages in terms of cost reduction, power consumption, and compatibility with conventional wireless network structure. We have designed a cost effective bidirectional D-RoF system using a low pass SDM and measured the downlink and uplink transmission performance in terms of error vector magnitude, signal spectra, and constellations, which are based on the 10MHz LTE 64-QAM standard.

  7. Numerical Simulation Bidirectional Chaotic Synchronization of Spiegel-Moore Circuit and Its Application for Secure Communication

    NASA Astrophysics Data System (ADS)

    Sanjaya, W. S. M.; Anggraeni, D.; Denya, R.; Ismail, N.

    2017-03-01

    Spiegel-Moore is a dynamical chaotic system which shows irregular variability in the luminosity of stars. In this paper present the performed the design and numerical simulation of the synchronization Spiegel-Moore circuit and applied to security system for communication. The initial study in this paper is to analyze the eigenvalue structures, various attractors, Bifurcation diagram, and Lyapunov exponent analysis. We have studied the dynamic behavior of the system in the case of the bidirectional coupling via a linear resistor. Both experimental and simulation results have shown that chaotic synchronization is possible. Finally, the effectiveness of the bidirectional coupling scheme between two identical Spiegel-Moore circuits in a secure communication system is presented in details. Integration of theoretical electronic circuit, the numerical simulation by using MATLAB®, as well as the implementation of circuit simulations by using Multisim® has been performed in this study.

  8. Spectral bidirectional reflectance and effects on vegetation indices for a prairie grassland

    NASA Technical Reports Server (NTRS)

    Deering, D. W.; Middleton, E. M.

    1990-01-01

    Preliminary results of bidirectional reflectance data from two radiometric devices are presented and considered in the light of surface biophysical properties that affect surface radiometric parameters. The Portable Apparatus for Rapid Acquisition of Bidirectional Observations of the Land and Atmosphere and a high spectral continuous-wavelength spectroradiometer called the SE590 are employed to study hemispherical-conical reflectance factors. Examples of the resulting data sets are presented which show that the normalized-difference vegetation index and the Simple-Ratio vegetation index depend on the solar zenith and sensor-view zenith angles. Consideration is given to the importance of latitude, season, and time of day in interpreting the results of the indices since these factors can significantly affect the interpretive parameters.

  9. Low energy proton bidirectional anisotropies and their relation to transient interplanetary magnetic structures: ISEE-3 observations

    NASA Technical Reports Server (NTRS)

    Marsden, R. G.; Sanderson, T. R.; Wenzel, K. P.; Smith, E. J.

    1985-01-01

    It is known that the interplanetary medium in the period approaching solar maximum is characterized by an enhancement in the occurrence of transient solar wind streams and shocks and that such systems are often associated with looplike magnetic structures or clouds. There is observational evidence that bidirectional, field aligned flows of low energy particles could be a signature of such looplike structures, although detailed models for the magnetic field configuration and injection mechanisms do not exist at the current time. Preliminary results of a survey of low energy proton bidirectional anisotropies measured on ISEE-3 in the interplanetary medium between August 1978 and May 1982, together with magnetic field data from the same spacecraft are presented.

  10. Enhanced correlation of received power-signal fluctuations in bidirectional optical links

    NASA Astrophysics Data System (ADS)

    Minet, Jean; Vorontsov, Mikhail A.; Polnau, Ernst; Dolfi, Daniel

    2013-02-01

    A study of the correlation between the power signals received at both ends of bidirectional free-space optical links is presented. By use of the quasi-optical approximation, we show that an ideal (theoretically 100%) power-signal correlation can be achieved in optical links with specially designed monostatic transceivers based on single-mode fiber collimators. The theoretical prediction of enhanced correlation is supported both by experiments conducted over a 7 km atmospheric path and wave optics numerical analysis of the corresponding bidirectional optical link. In the numerical simulations, we also compare correlation properties of received power signals for different atmospheric conditions and for optical links with monostatic and bistatic geometries based on single-mode fiber collimator and on power-in-the-bucket transceiver types. Applications of the observed phenomena for signal fading mitigation and turbulence-enhanced communication link security in free-space laser communication links are discussed.

  11. Experimental investigation of bidirectional hybrid fiber amplifiers in a recycling-pump mechanism

    NASA Astrophysics Data System (ADS)

    Liaw, S. K.; Wang, Y.-C.; Yu, Y.-L.; Liu, R.-Y.; Payne, F. P.

    2012-09-01

    A bidirectional hybrid fiber amplifier is proposed and experimentally demonstrated. It is composed of a C-band erbium-doped fiber amplifier (EDFA) and an L-band Raman fiber amplifier (RFA). A single-wavelength pump source is used to pump both the EDFA and the RFA. Using 500 mW pump power at 1595 nm, the average gains are 11.35 dB for the EDFA and 10.08 dB for the RFA, respectively, with a launched signal power of -10 dBm. The power penalties are less than 0.38 and 0.88 dB, respectively, for 50 and 75 km unidirectional and bidirectional transmission.

  12. Bidirectional Bacterial Gliding Motility Powered by the Collective Transport of Cell Surface Proteins

    NASA Astrophysics Data System (ADS)

    Wada, Hirofumi; Nakane, Daisuke; Chen, Hsuan-Yi

    2013-12-01

    The gliding motility of Flavobacterium johnsoniae is driven by moving surface adhesive proteins. Recently, these motility components were observed to travel along a closed loop on the cell surface. The mechanism by which such moving surface adhesins give rise to cell motion remains unknown. On the basis of the unique motility properties of F. johnsoniae, we present a generic model for bidirectional motion of rigidly coupled adhesins, which are propelled in opposite directions. Using analytical and numerical methods, we demonstrate that, for a sufficiently large adhesin speed, bidirectional motion arises from spontaneous symmetry breaking. The model also predicts that, close to the bifurcation point, a weak asymmetry in the binding dynamics is sufficient to facilitate directed motility, indicating that the direction of motion could be sensitively regulated internally in response to inhomogeneity of the environment.

  13. Emotion socialization and internalizing behavior problems in diverse youth: A bidirectional relationship across childhood.

    PubMed

    Rodas, Naomi V; Chavira, Denise A; Baker, Bruce L

    2017-03-01

    Mothers' and fathers' emotion socialization (ES) practices have been widely associated with child socioemotional outcomes. To extend this research, we examined the bidirectional relationship between parent ES practices (supportive and non-supportive parenting) and internalizing behavior problems in children of Anglo and Latino parents. Participants were 182 mothers and 162 fathers and their children with or without intellectual disability (ID). We compared the stability of mother and father ES practices across child ages 4-8. We utilized cross-lagged panel modeling to examine the bidirectional relationship between parents' ES and child internalizing behavior problems. Emotion socialization practices differed across time by parent gender, with mothers displaying higher levels of supportive parenting and lower levels of non-supportive parenting than fathers. Cross-lagged panel models revealed differential relationships between child internalizing behaviors and emotion socialization practices by parent gender and by ethnicity. Implications for intervening with culturally diverse families of children with ID are discussed.

  14. Bidirectional neural interface: Closed-loop feedback control for hybrid neural systems.

    PubMed

    Chou, Zane; Lim, Jeffrey; Brown, Sophie; Keller, Melissa; Bugbee, Joseph; Broccard, Frédéric D; Khraiche, Massoud L; Silva, Gabriel A; Cauwenberghs, Gert

    2015-01-01

    Closed-loop neural prostheses enable bidirectional communication between the biological and artificial components of a hybrid system. However, a major challenge in this field is the limited understanding of how these components, the two separate neural networks, interact with each other. In this paper, we propose an in vitro model of a closed-loop system that allows for easy experimental testing and modification of both biological and artificial network parameters. The interface closes the system loop in real time by stimulating each network based on recorded activity of the other network, within preset parameters. As a proof of concept we demonstrate that the bidirectional interface is able to establish and control network properties, such as synchrony, in a hybrid system of two neural networks more significantly more effectively than the same system without the interface or with unidirectional alternatives. This success holds promise for the application of closed-loop systems in neural prostheses, brain-machine interfaces, and drug testing.

  15. The internal flow pattern analysis of a tidal power turbine operating on bidirectional generation-pumping

    NASA Astrophysics Data System (ADS)

    Y Luo, Y.; Xiao, Y. X.; Wang, Z. W.

    2013-12-01

    Using tidal energy can reduce environment pollution, save conventional energy and improve energy structure, hence it presents great advantage and is developing potential. Influenced by flood tide and low tide, a fully functional tidal power station needs to experience six operating modes, including bidirectional generation, pumping and sluice; the internal unsteady flow pattern and dynamic characters are very complicated. Based on a bidirectional tidal generator unit, three-dimensional unsteady flows in the flow path were calculated for four typical operating conditions with the pressure pulsation characteristics analyzed. According to the numerical results, the internal flow characteristics in the flow path were discussed. The influence of gravity to the hydraulic performance and flow characteristics were analysed. The results provide a theoretical analysis method of the hydraulic optimization design of the same type unit as well as a direction for stable operation and optimal scheduling of existing tidal power unit.

  16. Anisotropic Total Variation Filtering

    SciTech Connect

    Grasmair, Markus; Lenzen, Frank

    2010-12-15

    Total variation regularization and anisotropic filtering have been established as standard methods for image denoising because of their ability to detect and keep prominent edges in the data. Both methods, however, introduce artifacts: In the case of anisotropic filtering, the preservation of edges comes at the cost of the creation of additional structures out of noise; total variation regularization, on the other hand, suffers from the stair-casing effect, which leads to gradual contrast changes in homogeneous objects, especially near curved edges and corners. In order to circumvent these drawbacks, we propose to combine the two regularization techniques. To that end we replace the isotropic TV semi-norm by an anisotropic term that mirrors the directional structure of either the noisy original data or the smoothed image. We provide a detailed existence theory for our regularization method by using the concept of relaxation. The numerical examples concluding the paper show that the proposed introduction of an anisotropy to TV regularization indeed leads to improved denoising: the stair-casing effect is reduced while at the same time the creation of artifacts is suppressed.

  17. Partial polarizer filter

    NASA Technical Reports Server (NTRS)

    Title, A. M. (Inventor)

    1978-01-01

    A birefringent filter module comprises, in seriatum. (1) an entrance polarizer, (2) a first birefringent crystal responsive to optical energy exiting the entrance polarizer, (3) a partial polarizer responsive to optical energy exiting the first polarizer, (4) a second birefringent crystal responsive to optical energy exiting the partial polarizer, and (5) an exit polarizer. The first and second birefringent crystals have fast axes disposed + or -45 deg from the high transmitivity direction of the partial polarizer. Preferably, the second crystal has a length 1/2 that of the first crystal and the high transmitivity direction of the partial polarizer is nine times as great as the low transmitivity direction. To provide tuning, the polarizations of the energy entering the first crystal and leaving the second crystal are varied by either rotating the entrance and exit polarizers, or by sandwiching the entrance and exit polarizers between pairs of half wave plates that are rotated relative to the polarizers. A plurality of the filter modules may be cascaded.

  18. Nanoparticle optical notch filters

    NASA Astrophysics Data System (ADS)

    Kasinadhuni, Pradeep Kumar

    Developing novel light blocking products involves the design of a nanoparticle optical notch filter, working on the principle of localized surface plasmon resonance (LSPR). These light blocking products can be used in many applications. One such application is to naturally reduce migraine headaches and light sensitivity. Melanopsin ganglion cells present in the retina of the human eye, connect to the suprachiasmatic nucleus (SCN-the body's clock) in the brain, where they participate in the entrainment of the circadian rhythms. As the Melanopsin ganglion cells are involved in triggering the migraine headaches in photophobic patients, it is necessary to block the part of visible spectrum that activates these cells. It is observed from the action potential spectrum of the ganglion cells that they absorb light ranging from 450-500nm (blue-green part) of the visible spectrum with a λmax (peak sensitivity) of around 480nm (blue line). Currently prescribed for migraine patients is the FL-41 coating, which blocks a broad range of wavelengths, including wavelengths associated with melanopsin absorption. The nanoparticle optical notch filter is designed to block light only at 480nm, hence offering an effective prescription for the treatment of migraine headaches.

  19. Learning to Monitor Machine Health with Convolutional Bi-Directional LSTM Networks.

    PubMed

    Zhao, Rui; Yan, Ruqiang; Wang, Jinjiang; Mao, Kezhi

    2017-01-30

    In modern manufacturing systems and industries, more and more research efforts have been made in developing effective machine health monitoring systems. Among various machine health monitoring approaches, data-driven methods are gaining in popularity due to the development of advanced sensing and data analytic techniques. However, considering the noise, varying length and irregular sampling behind sensory data, this kind of sequential data cannot be fed into classification and regression models directly. Therefore, previous work focuses on feature extraction/fusion methods requiring expensive human labor and high quality expert knowledge. With the development of deep learning methods in the last few years, which redefine representation learning from raw data, a deep neural network structure named Convolutional Bi-directional Long Short-Term Memory networks (CBLSTM) has been designed here to address raw sensory data. CBLSTM firstly uses CNN to extract local features that are robust and informative from the sequential input. Then, bi-directional LSTM is introduced to encode temporal information. Long Short-Term Memory networks(LSTMs) are able to capture long-term dependencies and model sequential data, and the bi-directional structure enables the capture of past and future contexts. Stacked, fully-connected layers and the linear regression layer are built on top of bi-directional LSTMs to predict the target value. Here, a real-life tool wear test is introduced, and our proposed CBLSTM is able to predict the actual tool wear based on raw sensory data. The experimental results have shown that our model is able to outperform several state-of-the-art baseline methods.

  20. A Multispectral Bidirectional Reflectance Distribution Function Study of Human Skin for Improved Dismount Detection

    DTIC Science & Technology

    2011-03-01

    angular locations to improve on the rules-based detector. Our research approach first characterizes skin’s specular reflectance with direct measurements ...The fitting of a bidirectional reflectance distribution function model to iv the measurements with approximately 8.2% error allows us to incorporate the...2-8 2.3.1 BRDF Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8 2.3.2 BRDF Measurement

  1. Helical solutions of the bidirectional vortex in a cylindrical cyclone: Beltramian and Trkalian motions

    NASA Astrophysics Data System (ADS)

    Majdalani, Joseph

    2012-10-01

    In this work, two families of helical motions are investigated as prospective candidates for describing the bidirectional vortex field in a right-cylindrical chamber. These basic solutions are relevant to cyclone separators and to idealized representations of vortex-fired liquid and hybrid rocket engines in which bidirectional vortex motion is established. To begin, the bulk fluid motion is taken to be isentropic along streamlines, with no concern for reactions, heat transfer, viscosity, compressibility or unsteadiness. Then using the Bragg-Hawthorne equation for steady, inviscid, axisymmetric motion, two families of Euler solutions are derived. Among the characteristics of the newly developed solutions one may note the axial dependence of the swirl velocity, the Trkalian and Beltramian types of the helical motions, the sensitivity of the solutions to the outlet radius, the alternate locations of the mantle, and the increased axial and radial velocity magnitudes, including the rate of mass transfer across the mantle, for which explicit approximations are obtained. Our results are compared to an existing, complex lamellar model of the bidirectional vortex in which the swirl velocity reduces to a free vortex. In this vein, we find the strictly Beltramian flows to share virtually identical pressure variations and radial pressure gradients with those associated with the complex lamellar motion. Furthermore, both families warrant an asymptotic treatment to overcome their endpoint limitations caused by their omission of viscous stresses. From a broader perspective, the work delineates a logical framework through which self-similar, axisymmetric solutions to bidirectional and multidirectional vortex motions may be pursued. It also illustrates the manner through which different formulations may be arrived at depending on the types of wall boundary conditions. For example, both the slip condition at the sidewall and the inlet flow pattern at the headwall may be enforced or

  2. [Bidirectional impact of two chronic diseases: heart failure and diabetes mellitus].

    PubMed

    Tafur, José D; Ventura, Héctor O

    2016-12-27

    Heart failure remains a significant burden to healthcare systems. Even of the advances in medical therapy, heart failure morbidity and mortality have not been significantly reduced. Diabetes mellitus has shown to be a significant risk factor for the development and prognosis of heart failure. Traditionally, these two chronic illnesses have been managed in relative isolation. Clinicians should be more cognizant of the bidirectional impact between heart failure and diabetes.

  3. Learning to Monitor Machine Health with Convolutional Bi-Directional LSTM Networks

    PubMed Central

    Zhao, Rui; Yan, Ruqiang; Wang, Jinjiang; Mao, Kezhi

    2017-01-01

    In modern manufacturing systems and industries, more and more research efforts have been made in developing effective machine health monitoring systems. Among various machine health monitoring approaches, data-driven methods are gaining in popularity due to the development of advanced sensing and data analytic techniques. However, considering the noise, varying length and irregular sampling behind sensory data, this kind of sequential data cannot be fed into classification and regression models directly. Therefore, previous work focuses on feature extraction/fusion methods requiring expensive human labor and high quality expert knowledge. With the development of deep learning methods in the last few years, which redefine representation learning from raw data, a deep neural network structure named Convolutional Bi-directional Long Short-Term Memory networks (CBLSTM) has been designed here to address raw sensory data. CBLSTM firstly uses CNN to extract local features that are robust and informative from the sequential input. Then, bi-directional LSTM is introduced to encode temporal information. Long Short-Term Memory networks (LSTMs) are able to capture long-term dependencies and model sequential data, and the bi-directional structure enables the capture of past and future contexts. Stacked, fully-connected layers and the linear regression layer are built on top of bi-directional LSTMs to predict the target value. Here, a real-life tool wear test is introduced, and our proposed CBLSTM is able to predict the actual tool wear based on raw sensory data. The experimental results have shown that our model is able to outperform several state-of-the-art baseline methods. PMID:28146106

  4. Evaluation of Bidirectional Silicon Carbide Solid-State Circuit Breaker v3.2

    DTIC Science & Technology

    2013-07-01

    shown in figure 3 (1). The DC supply charges the 3 capacitor through a high resistance. Then the insulated gate bipolar transistor (IGBT) is...insulated gate bipolar transistor JFET junction field-effect transistor SiC silicon carbide TRL technical readiness level USCi United Silicon...field-effect transistor (JFET) based bidirectional solid-state circuit breaker (BDSSCB) to reduce self-trigging and reset response times, and increase

  5. Bidirectional 16-QAM OFDM in-building network over SMF and free-space VLC transport.

    PubMed

    Chen, Chia-Yi; Wu, Po-Yi; Lu, Hai-Han; Lin, Ying-Pyng; Wen, Jian-Ying; Hu, Fu-Chih

    2013-07-01

    A bidirectional 16-quadrature amplitude modulation (QAM) orthogonal frequency-division multiplexing (OFDM) in-building network over 20 km single-mode fiber (SMF) and 15 m free-space visible light communication (VLC) transport is proposed and experimentally demonstrated. Good bit error rate performances and clear constellation maps are obtained for 16-QAM OFDM applications in our proposed in-building networks.

  6. Prairie grassland bidirectional reflectances measured by different instruments at the FIFE site

    NASA Technical Reports Server (NTRS)

    Deering, D. W.; Middleton, E. M.; Irons, J. R.; Blad, B. L.; Walter-Shea, E. A.; Hays, C. J.; Walthall, C.; Eck, T. F.; Ahmad, S. P.; Banerjee, B. P.

    1992-01-01

    Land surface reflectance measurements were obtained during the First ISLSCP Field Experiment (FIFE) field campaigns utilizing a variety of airborne and ground-based spectral radiometers. To study the validity of the assumption that the values obtained by the several different teams and instruments were interchangeable, the surface radiation measurement teams converged on a common site for one day during the fifth intensive field campaign in 1989. The bidirectional reflectances from the various instruments were basically found to be comparable.

  7. The bi-directional moving structures in a coronal bright point

    NASA Astrophysics Data System (ADS)

    Li, Dong; Ning, Zongjun; Su, Yingna

    2016-09-01

    We report the bi-directional moving structures in a coronal bright point (CBP) on 2015 July 14. It is observed by the Atmospheric Imaging Assembly (AIA) onboard Solar Dynamics Observatory (SDO). This CBP has a lifetime of ˜10 minutes, and a curved shape. The observations show that many bright structures are moving intermittently outward from the CBP brightness core. Such moving structures are clearly seen at AIA 171 Å, 193 Å, 211 Å, 131 Å, 94 Å, 335 Å and 304 Å, slit-jaw (SJI) 1330 Å and 1400 Å. In order to analyze these moving structures, the CBP is cut along the moving direction with a curved slit from the AIA and SJI images. Then we can obtain the time-distance slices, including the intensity and intensity-derivative diagrams, from which, the moving structures are recognized as the oblique streaks, and they are characterized by the bi-direction, simultaneity, symmetry, and periodicity. The average speed is around 300 km s^{-1}, while the typically period is ˜90 s. All these features (including the bi-directional flows and their periodicity) can be detected simultaneously at all the 9 wavelengths. This CBP takes place at the site between a small pair of magnetic polarities. High time resolution observations show that they are moving close to each other during its lifetime. These facts support the magnetic reconnection model of the CBP and the bi-directional moving structures could be the observational outflows after the reconnection. Therefore, they can be as the direct observation evidence of the magnetic reconnection.

  8. Bidirectional ventricular tachycardia with myocardial infarction: a case report with insight on mechanism and treatment.

    PubMed

    Wase, Abdul; Masood, Abdul-Mannan; Garikipati, Naga V; Mufti, Omar; Kabir, Anwarul

    2014-01-01

    Bidirectional ventricular tachycardia (BVT) is a rare variety of tachycardia with morphologically distinct presentation: The QRS axis and/or morphology is alternating in the frontal plane leads. Since its original description in association with digitalis,(1) numerous cases of this fascinating tachycardia with disparate etiologies and mechanisms have been postulated. We report a patient with BVT in association with non-ST elevation myocardial infarction and severe cardiomyopathy in the absence of digoxin toxicity.

  9. Global evaluation of ammonia bidirectional exchange and livestock diurnal variation schemes

    EPA Pesticide Factsheets

    There is no EPA generated dataset in this study.This dataset is associated with the following publication:Zhu, L., D. Henze, J. Bash , G. Jeong, K. Cady-Pereira, M. Shephard, M. Luo, F. Poulot, and S. Capps. Global evaluation of ammonia bidirectional exchange and livestock diurnal variation schemes. Atmospheric Chemistry and Physics. Copernicus Publications, Katlenburg-Lindau, GERMANY, 15: 12823-12843, (2015).

  10. Experimental demonstration of block interleaved frequency division multiple access for bidirectional visible light communications

    NASA Astrophysics Data System (ADS)

    Lin, Bangjiang; Yang, Hui; Ye, Weiping; Tang, Xuan; Ghassemlooy, Zabih

    2017-01-01

    We propose a power efficient multiple access scheme for visible light communications (VLC) based on the block interleaved frequency division multiple access (B-IFDMA) which provides large frequency-diversity, flexible bandwidth allocation, low complexity of channel equalization, and user separation. Bidirectional B-IFDMA VLC transmission is experimentally demonstrated to verify its feasibility. The impact of the number of subcarriers per block on the transmission performance under wireless optical channel is investigated.

  11. Spatial filters for high average power lasers

    DOEpatents

    Erlandson, Alvin C

    2012-11-27

    A spatial filter includes a first filter element and a second filter element overlapping with the first filter element. The first filter element includes a first pair of cylindrical lenses separated by a first distance. Each of the first pair of cylindrical lenses has a first focal length. The first filter element also includes a first slit filter positioned between the first pair of cylindrical lenses. The second filter element includes a second pair of cylindrical lenses separated by a second distance. Each of the second pair of cylindrical lenses has a second focal length. The second filter element also includes a second slit filter positioned between the second pair of cylindrical lenses.

  12. Evolution of bidirectional sex change and gonochorism in fishes of the gobiid genera Trimma, Priolepis, and Trimmatom.

    PubMed

    Sunobe, Tomoki; Sado, Tetsuya; Hagiwara, Kiyoshi; Manabe, Hisaya; Suzuki, Toshiyuki; Kobayashi, Yasuhisa; Sakurai, Makoto; Dewa, Shin-Ichi; Matsuoka, Midori; Shinomiya, Akihiko; Fukuda, Kazuya; Miya, Masaki

    2017-04-01

    Size-advantage and low-density models have been used to explain how mating systems favor hermaphroditism or gonochorism. However, these models do not indicate historical transitions in sexuality. Here, we investigate the evolution of bidirectional sex change and gonochorism by phylogenetic analysis using the mitochondrial gene of the gobiids Trimma (31 species), Priolepis (eight species), and Trimmatom (two species). Trimma and Priolepis formed a clade within the sister group Trimmatom. Gonadal histology and rearing experiments revealed that Trimma marinae, Trimma nasa, and Trimmatom spp. were gonochoric, whereas all other Trimma and Priolepis spp. were bidirectional sex changers or inferred ones. A maximum-likelihood reconstruction analysis demonstrated that the common ancestor of the three genera was gonochoristic. Bidirectional sex change probably evolved from gonochorism in a common ancestor of Trimma and Priolepis. As the gonads of bidirectional sex changers simultaneously contain mature ovarian and immature testicular components or vice versa, individuals are always potentially capable of functioning as females or males, respectively. Monogamy under low-density conditions may have been the ecological condition for the evolution of bidirectional sex change in a common ancestor. As T. marinae and T. nasa are a monophyletic group, gonochorism should have evolved from bidirectional sex change in a common ancestor.

  13. Evolution of bidirectional sex change and gonochorism in fishes of the gobiid genera Trimma, Priolepis, and Trimmatom

    NASA Astrophysics Data System (ADS)

    Sunobe, Tomoki; Sado, Tetsuya; Hagiwara, Kiyoshi; Manabe, Hisaya; Suzuki, Toshiyuki; Kobayashi, Yasuhisa; Sakurai, Makoto; Dewa, Shin-ichi; Matsuoka, Midori; Shinomiya, Akihiko; Fukuda, Kazuya; Miya, Masaki

    2017-04-01

    Size-advantage and low-density models have been used to explain how mating systems favor hermaphroditism or gonochorism. However, these models do not indicate historical transitions in sexuality. Here, we investigate the evolution of bidirectional sex change and gonochorism by phylogenetic analysis using the mitochondrial gene of the gobiids Trimma (31 species), Priolepis (eight species), and Trimmatom (two species). Trimma and Priolepis formed a clade within the sister group Trimmatom. Gonadal histology and rearing experiments revealed that Trimma marinae, Trimma nasa, and Trimmatom spp. were gonochoric, whereas all other Trimma and Priolepis spp. were bidirectional sex changers or inferred ones. A maximum-likelihood reconstruction analysis demonstrated that the common ancestor of the three genera was gonochoristic. Bidirectional sex change probably evolved from gonochorism in a common ancestor of Trimma and Priolepis. As the gonads of bidirectional sex changers simultaneously contain mature ovarian and immature testicular components or vice versa, individuals are always potentially capable of functioning as females or males, respectively. Monogamy under low-density conditions may have been the ecological condition for the evolution of bidirectional sex change in a common ancestor. As T. marinae and T. nasa are a monophyletic group, gonochorism should have evolved from bidirectional sex change in a common ancestor.

  14. Memory, bias, and correlations in bidirectional transport of molecular-motor-driven cargoes

    NASA Astrophysics Data System (ADS)

    Bhat, Deepak; Gopalakrishnan, Manoj

    2013-10-01

    Molecular motors are specialized proteins that perform active, directed transport of cellular cargoes on cytoskeletal filaments. In many cases, cargo motion powered by motor proteins is found to be bidirectional, and may be viewed as a biased random walk with fast unidirectional runs interspersed with slow tug-of-war states. The statistical properties of this walk are not known in detail, and here, we study memory and bias, as well as directional correlations between successive runs in bidirectional transport. We show, based on a study of the direction-reversal probabilities of the cargo using a purely stochastic (tug-of-war) model, that bidirectional motion of cellular cargoes is, in general, a correlated random walk. In particular, while the motion of a cargo driven by two oppositely pulling motors is a Markovian random walk, memory of direction appears when multiple motors haul the cargo in one or both directions. In the latter case, the Markovian nature of the underlying single-motor processes is hidden by internal transitions between degenerate run and pause states of the cargo. Interestingly, memory is found to be a nonmonotonic function of the number of motors. Stochastic numerical simulations of the tug-of-war model support our mathematical results and extend them to biologically relevant situations.

  15. Bidirectional relationship between chronic kidney and periodontal disease: a study using structural equation modeling.

    PubMed

    Fisher, Monica A; Taylor, George W; West, Brady T; McCarthy, Ellen T

    2011-02-01

    Periodontal disease is associated with diabetes, heart disease, and chronic kidney disease (CKD), relationships postulated to be due in part to vascular inflammation. A bidirectional relationship between CKD and periodontal disease is plausible, though this relationship has not been previously reported. In this study, we assessed the potential for connections between CKD and periodontal disease, and mediators of these relationships using structural equation models of data from 11,211 adults ≥ 18 years of age who participated in the Third National Health and Nutrition Examination Survey. Multivariable logistic regression models were used to test the hypothesis that periodontal disease was independently associated with CKD. Given the potential that the periodontal disease and CKD relationship may be bidirectional, a two-step analytic approach was used that involved tests for mediation and structural equation models to examine more complex direct and indirect effects of periodontal disease on CKD, and vice versa. In two separate models, periodontal disease (adjusted odds ratio of 1.62), edentulism (adjusted odds ratio of 1.83), and the periodontal disease score were associated with CKD when simultaneously adjusting for 14 other factors. Altogether, three of four structural equation models support the hypothesized relationship. Thus, our analyses support a bidirectional relationship between CKD and periodontal disease, mediated by hypertension and the duration of diabetes.

  16. Bidirectional transport by molecular motors: enhanced processivity and response to external forces.

    PubMed

    Müller, Melanie J I; Klumpp, Stefan; Lipowsky, Reinhard

    2010-06-02

    Intracellular transport along cytoskeletal filaments is often mediated by two teams of molecular motors that pull on the same cargo and move in opposite directions along the filaments. We have recently shown theoretically that this bidirectional transport can be understood as a stochastic tug-of-war between the two motor teams. Here, we further develop our theory to investigate the experimentally accessible dynamic behavior of cargos transported by strong motors such as kinesin-1 or cytoplasmic dynein. By studying the run and binding times of such a cargo, we show that the properties of biological motors, such as the large ratio of stall/detachment force and the small ratio of superstall backward/forward velocity, are favorable for bidirectional cargo transport, leading to fast motion and enhanced diffusion. In addition, cargo processivity is shown to be strongly enhanced by transport via several molecular motors even if these motors are engaged in a tug-of-war. Finally, we study the motility of a bidirectional cargo under force. Frictional forces arising, e.g., from the viscous cytoplasm, lead to peaks in the velocity distribution, while external forces as exerted, e.g., by an optical trap, lead to hysteresis effects. Our results, in particular our explicit expressions for the cargo binding time and the distance of the peaks in the velocity relation under friction, are directly accessible to in vitro as well as in vivo experiments.

  17. Multi-phasic bi-directional chemotactic responses of the growth cone

    PubMed Central

    Naoki, Honda; Nishiyama, Makoto; Togashi, Kazunobu; Igarashi, Yasunobu; Hong, Kyonsoo; Ishii, Shin

    2016-01-01

    The nerve growth cone is bi-directionally attracted and repelled by the same cue molecules depending on the situations, while other non-neural chemotactic cells usually show uni-directional attraction or repulsion toward their specific cue molecules. However, how the growth cone differs from other non-neural cells remains unclear. Toward this question, we developed a theory for describing chemotactic response based on a mathematical model of intracellular signaling of activator and inhibitor. Our theory was first able to clarify the conditions of attraction and repulsion, which are determined by balance between activator and inhibitor, and the conditions of uni- and bi-directional responses, which are determined by dose-response profiles of activator and inhibitor to the guidance cue. With biologically realistic sigmoidal dose-responses, our model predicted tri-phasic turning response depending on intracellular Ca2+ level, which was then experimentally confirmed by growth cone turning assays and Ca2+ imaging. Furthermore, we took a reverse-engineering analysis to identify balanced regulation between CaMKII (activator) and PP1 (inhibitor) and then the model performance was validated by reproducing turning assays with inhibitions of CaMKII and PP1. Thus, our study implies that the balance between activator and inhibitor underlies the multi-phasic bi-directional turning response of the growth cone. PMID:27808115

  18. Cellular Mechanisms Underlying Behavioral State-Dependent Bidirectional Modulation of Motor Cortex Output

    PubMed Central

    Schiemann, Julia; Puggioni, Paolo; Dacre, Joshua; Pelko, Miha; Domanski, Aleksander; van Rossum, Mark C.W.; Duguid, Ian

    2015-01-01

    Summary Neuronal activity in primary motor cortex (M1) correlates with behavioral state, but the cellular mechanisms underpinning behavioral state-dependent modulation of M1 output remain largely unresolved. Here, we performed in vivo patch-clamp recordings from layer 5B (L5B) pyramidal neurons in awake mice during quiet wakefulness and self-paced, voluntary movement. We show that L5B output neurons display bidirectional (i.e., enhanced or suppressed) firing rate changes during movement, mediated via two opposing subthreshold mechanisms: (1) a global decrease in membrane potential variability that reduced L5B firing rates (L5Bsuppressed neurons), and (2) a coincident noradrenaline-mediated increase in excitatory drive to a subpopulation of L5B neurons (L5Benhanced neurons) that elevated firing rates. Blocking noradrenergic receptors in forelimb M1 abolished the bidirectional modulation of M1 output during movement and selectively impaired contralateral forelimb motor coordination. Together, our results provide a mechanism for how noradrenergic neuromodulation and network-driven input changes bidirectionally modulate M1 output during motor behavior. PMID:25981037

  19. Bidirectional associations in multiplication memory: conditions of negative and positive transfer.

    PubMed

    Campbell, Jamie I D; Robert, Nicole D

    2008-05-01

    A variety of experimental evidence indicates that the memory representation for multiplication facts (e.g., 6 x 9 = 54) incorporates bidirectional links with a forward association from factors to product and a reverse association from product to factors. Surprisingly, the authors did not find evidence in Experiment 1 of facilitative transfer-of-practice from multiplication (6 x 9 = ?) to factoring (54 = ? x ?); in fact, multiplication practice produced item-specific interference with factoring. Similarly, the authors found no evidence in Experiment 2 that repetition of specific factoring problems (54 = ? x ?) facilitated performance of corresponding multiplication problems (6 x 9 = ?). In Experiment 3, participants practiced both multiplication and factoring and presented facilitative transfer in both directions. Thus, bidirectional facilitation occurred if both operations were practiced, but interference occurred when only one operation was practiced. We propose that this seemingly paradoxical behavior occurs because it is adaptive for the bidirectional retrieval structure to retain operational flexibility in the context of practicing both operations, whereas it is adaptive to specialize the memory representation for the practiced operation (i.e., factoring or multiplication) when only one operation is practiced.

  20. Multi-phasic bi-directional chemotactic responses of the growth cone

    NASA Astrophysics Data System (ADS)

    Naoki, Honda; Nishiyama, Makoto; Togashi, Kazunobu; Igarashi, Yasunobu; Hong, Kyonsoo; Ishii, Shin

    2016-11-01

    The nerve growth cone is bi-directionally attracted and repelled by the same cue molecules depending on the situations, while other non-neural chemotactic cells usually show uni-directional attraction or repulsion toward their specific cue molecules. However, how the growth cone differs from other non-neural cells remains unclear. Toward this question, we developed a theory for describing chemotactic response based on a mathematical model of intracellular signaling of activator and inhibitor. Our theory was first able to clarify the conditions of attraction and repulsion, which are determined by balance between activator and inhibitor, and the conditions of uni- and bi-directional responses, which are determined by dose-response profiles of activator and inhibitor to the guidance cue. With biologically realistic sigmoidal dose-responses, our model predicted tri-phasic turning response depending on intracellular Ca2+ level, which was then experimentally confirmed by growth cone turning assays and Ca2+ imaging. Furthermore, we took a reverse-engineering analysis to identify balanced regulation between CaMKII (activator) and PP1 (inhibitor) and then the model performance was validated by reproducing turning assays with inhibitions of CaMKII and PP1. Thus, our study implies that the balance between activator and inhibitor underlies the multi-phasic bi-directional turning response of the growth cone.

  1. Development of an efficient bi-directional promoter with tripartite enhancer employing three viral promoters.

    PubMed

    Patro, Sunita; Maiti, Indu B; Dey, Nrisingha

    2013-02-10

    We have developed a novel bi-directional promoter (FsFfCBD) by placing two heterogeneous core-promoters from the Figwort mosaic virus sub-genomic transcript promoter (FsCP, -69 to +31) and Cauliflower mosaic virus 35S promoter (CCP, -89 to +1) respectively on upstream (5') and downstream (3') ends of a tri-hybrid enhancer (FsEFfECE), in reverse orientation. The FsEFfECE domain encompasses three heterologous enhancer fragments from Figwort mosaic virus sub-genomic transcript promoter (FsE, 101 bp, -70 to -170), Figwort mosaic virus full-length transcript promoter (FfE, 196 bp, -249 to -54) and Cauliflower mosaic virus 35S promoter (CE, 254 bp, -343 to -90). The bi-directional nature of the FsFfCBD promoter (coupled to GFP and GUS) was established both in transient systems (onion epidermal cells and tobacco protoplasts) and transgenic plant (Nicotiana tabacum samsun NN) by monitoring the simultaneous expression of GFP and GUS employing fluorescence (for GFP) and biochemical (for GUS) based assays. In transgenic plants, the FsFfCBD promoter was found to be 6.8 and 2.5 times stronger than two parent promoters; Fs and FfC respectively. The bi-directional compound promoter FsFfCBD, composed of three heterologous enhancers with enhanced activity could become a valuable additional tool for efficient plant metabolic engineering and molecular pharming.

  2. Color coded multiple access scheme for bidirectional multiuser visible light communications in smart home technologies

    NASA Astrophysics Data System (ADS)

    Tiwari, Samrat Vikramaditya; Sewaiwar, Atul; Chung, Yeon-Ho

    2015-10-01

    In optical wireless communications, multiple channel transmission is an attractive solution to enhancing capacity and system performance. A new modulation scheme called color coded multiple access (CCMA) for bidirectional multiuser visible light communications (VLC) is presented for smart home applications. The proposed scheme uses red, green and blue (RGB) light emitting diodes (LED) for downlink and phosphor based white LED (P-LED) for uplink to establish a bidirectional VLC and also employs orthogonal codes to support multiple users and devices. The downlink transmission for data user devices and smart home devices is provided using red and green colors from the RGB LEDs, respectively, while uplink transmission from both types of devices is performed using the blue color from P-LEDs. Simulations are conducted to verify the performance of the proposed scheme. It is found that the proposed bidirectional multiuser scheme is efficient in terms of data rate and performance. In addition, since the proposed scheme uses RGB signals for downlink data transmission, it provides flicker-free illumination that would lend itself to multiuser VLC system for smart home applications.

  3. Bidirectional reflectance spectroscopy. III - Correction for macroscopic roughness. [of planetary surfaces

    NASA Technical Reports Server (NTRS)

    Hapke, B.

    1984-01-01

    A mathematically rigorous formalism is derived by which an arbitrary photometric function for the bidirectional reflectance of a smooth surface may be corrected to include effects of general macroscopic roughness. The correction involves only one arbitrary parameter, the mean slope angle, and is applicable to surfaces of any albedo. Using physically reasonable assumptions and mathematical approximations, the correction expressions are evaluated analytically to second order in the mean slope angle. The correction is applied to the bidirectional-reflectance function of Hapke (1981). Expressions for both the differential and integral brightnesses are obtained. Photometric profiles on hypothetical smooth and rough planets of low and high albedo are shown to illustrate the effects of macroscopic roughness. The theory is applied to observations of Mercury and predicts the integral phase function, the apparent polar darkening, and the lack of limb brightness surge on the planet. The roughness-corrected bidirectional-reflectance function is sufficiently simple that it can be conveniently evaluated on a programmable hand-held calculator.

  4. Dynamic Brain-Machine Interface: a novel paradigm for bidirectional interaction between brains and dynamical systems.

    PubMed

    Szymanski, Francois D; Semprini, Marianna; Mussa-Ivaldi, Ferdinando A; Fadiga, Luciano; Panzeri, Stefano; Vato, Alessandro

    2011-01-01

    Brain-Machine Interfaces (BMIs) are systems which mediate communication between brains and artificial devices. Their long term goal is to restore motor functions, and this ultimately demands the development of a new generation of bidirectional brain-machine interfaces establishing a two-way brain-world communication channel, by both decoding motor commands from neural activity and providing feedback to the brain by electrical stimulation. Taking inspiration from how the spinal cord of vertebrates mediates communication between the brain and the limbs, here we present a model of a bidirectional brain-machine interface that interacts with a dynamical system by generating a control policy in the form of a force field. In our model, bidirectional communication takes place via two elements: (a) a motor interface decoding activities recorded from a motor cortical area, and (b) a sensory interface encoding the state of the controlled device into electrical stimuli delivered to a somatosensory area. We propose a specific mathematical model of the sensory and motor interfaces guiding a point mass moving in a viscous medium, and we demonstrate its performance by testing it on realistically simulated neural responses.

  5. Note: Cryogenic coaxial microwave filters

    SciTech Connect

    Tancredi, G.; Meeson, P. J.; Schmidlin, S.

    2014-02-15

    The careful filtering of microwave electromagnetic radiation is critical for controlling the electromagnetic environment for experiments in solid-state quantum information processing and quantum metrology at millikelvin temperatures. We describe the design and fabrication of a coaxial filter assembly and demonstrate that its performance is in excellent agreement with theoretical modelling. We further perform an indicative test of the operation of the filters by making current-voltage measurements of small, underdamped Josephson junctions at 15 mK.

  6. Multi-filter spectrophotometry simulations

    NASA Technical Reports Server (NTRS)

    Callaghan, Kim A. S.; Gibson, Brad K.; Hickson, Paul

    1993-01-01

    To complement both the multi-filter observations of quasar environments described in these proceedings, as well as the proposed UBC 2.7 m Liquid Mirror Telescope (LMT) redshift survey, we have initiated a program of simulated multi-filter spectrophotometry. The goal of this work, still very much in progress, is a better quantitative assessment of the multiband technique as a viable mechanism for obtaining useful redshift and morphological class information from large scale multi-filter surveys.

  7. Coated x-ray filters

    DOEpatents

    Steinmeyer, Peter A.

    1992-11-24

    A radiation filter for filtering radiation beams of wavelengths within a preselected range of wavelengths comprises a radiation transmissive substrate and an attenuating layer deposited on the substrate. The attenuating layer may be deposited by a sputtering process or a vacuum process. Beryllium may be used as the radiation transmissive substrate. In addition, a second radiation filter comprises an attenuating layer interposed between a pair of radiation transmissive layers.

  8. Faraday anomalous dispersion optical filters

    NASA Technical Reports Server (NTRS)

    Shay, T. M.; Yin, B.; Alvarez, L. S.

    1993-01-01

    The effect of Faraday anomalous dispersion optical filters on infrared and blue transitions of some alkali atoms is calculated. A composite system is designed to further increase the background noise rejection. The measured results of the solar background rejection and image quality through the filter are presented. The results show that the filter may provide high transmission and high background noise rejection with excellent image quality.

  9. Optimization of integrated polarization filters.

    PubMed

    Gagnon, Denis; Dumont, Joey; Déziel, Jean-Luc; Dubé, Louis J

    2014-10-01

    This study reports on the design of small footprint, integrated polarization filters based on engineered photonic lattices. Using a rods-in-air lattice as a basis for a TE filter and a holes-in-slab lattice for the analogous TM filter, we are able to maximize the degree of polarization of the output beams up to 98% with a transmission efficiency greater than 75%. The proposed designs allow not only for logical polarization filtering, but can also be tailored to output an arbitrary transverse beam profile. The lattice configurations are found using a recently proposed parallel tabu search algorithm for combinatorial optimization problems in integrated photonics.

  10. Spatial filtering with photonic crystals

    SciTech Connect

    Maigyte, Lina; Staliunas, Kestutis

    2015-03-15

    Photonic crystals are well known for their celebrated photonic band-gaps—the forbidden frequency ranges, for which the light waves cannot propagate through the structure. The frequency (or chromatic) band-gaps of photonic crystals can be utilized for frequency filtering. In analogy to the chromatic band-gaps and the frequency filtering, the angular band-gaps and the angular (spatial) filtering are also possible in photonic crystals. In this article, we review the recent advances of the spatial filtering using the photonic crystals in different propagation regimes and for different geometries. We review the most evident configuration of filtering in Bragg regime (with the back-reflection—i.e., in the configuration with band-gaps) as well as in Laue regime (with forward deflection—i.e., in the configuration without band-gaps). We explore the spatial filtering in crystals with different symmetries, including axisymmetric crystals; we discuss the role of chirping, i.e., the dependence of the longitudinal period along the structure. We also review the experimental techniques to fabricate the photonic crystals and numerical techniques to explore the spatial filtering. Finally, we discuss several implementations of such filters for intracavity spatial filtering.

  11. Filter selection using genetic algorithms

    NASA Astrophysics Data System (ADS)

    Patel, Devesh

    1996-03-01

    Convolution operators act as matched filters for certain types of variations found in images and have been extensively used in the analysis of images. However, filtering through a bank of N filters generates N filtered images, consequently increasing the amount of data considerably. Moreover, not all these filters have the same discriminatory capabilities for the individual images, thus making the task of any classifier difficult. In this paper, we use genetic algorithms to select a subset of relevant filters. Genetic algorithms represent a class of adaptive search techniques where the processes are similar to natural selection of biological evolution. The steady state model (GENITOR) has been used in this paper. The reduction of filters improves the performance of the classifier (which in this paper is the multi-layer perceptron neural network) and furthermore reduces the computational requirement. In this study we use the Laws filters which were proposed for the analysis of texture images. Our aim is to recognize the different textures on the images using the reduced filter set.

  12. SRBF: Speckle reducing bilateral filtering.

    PubMed

    Balocco, Simone; Gatta, Carlo; Pujol, Oriol; Mauri, Josepa; Radeva, Petia

    2010-08-01

    Speckle noise negatively affects medical ultrasound image shape interpretation and boundary detection. Speckle removal filters are widely used to selectively remove speckle noise without destroying important image features to enhance object boundaries. In this article, a fully automatic bilateral filter tailored to ultrasound images is proposed. The edge preservation property is obtained by embedding noise statistics in the filter framework. Consequently, the filter is able to tackle the multiplicative behavior modulating the smoothing strength with respect to local statistics. The in silico experiments clearly showed that the speckle reducing bilateral filter (SRBF) has superior performances to most of the state of the art filtering methods. The filter is tested on 50 in vivo US images and its influence on a segmentation task is quantified. The results using SRBF filtered data sets show a superior performance to using oriented anisotropic diffusion filtered images. This improvement is due to the adaptive support of SRBF and the embedded noise statistics, yielding a more homogeneous smoothing. SRBF results in a fully automatic, fast and flexible algorithm potentially suitable in wide ranges of speckle noise sizes, for different medical applications (IVUS, B-mode, 3-D matrix array US).

  13. kMEn: analyzing noisy and bidirectional transcriptional pathway responses in single subjects

    PubMed Central

    Li, Qike; Schissler, A. Grant; Gardeux, Vincent; Berghout, Joanne; Achour, Ikbel; Kenost, Colleen

    2017-01-01

    Motivation Understanding dynamic, patient-level transcriptomic response to therapy is an important step forward for precision medicine. However, conventional transcriptome analysis aims to discover cohort-level change, lacking the capacity to unveil patient-specific response to therapy. To address this gap, we previously developed two N-of-1-pathways methods, Wilcoxon and Mahalanobis distance, to detect unidirectionally responsive transcripts within a pathway using a pair of samples from a single subject. Yet, these methods cannot recognize bidirectionally (up and down) responsive pathways. Further, our previous approaches have not been assessed in presence of background noise and are not designed to identify differentially expressed mRNAs between two samples of a patient taken in different contexts (e.g. cancer vs non cancer), which we termed responsive transcripts (RTs). Methods We propose a new N-of-1-pathways method, k-Means Enrichment (kMEn), that detects bidirection-ally responsive pathways, despite background noise, using a pair of transcriptomes from a single patient. kMEn identifies transcripts responsive to the stimulus through k-means clustering and then tests for an over-representation of the responsive genes within each pathway. The pathways identified by kMEn are mechanistically interpretable pathways significantly responding to a stimulus. Results In ~9000 simulations varying six parameters, superior performance of kMEn over previous single-subject methods is evident by: i) improved precision-recall at various levels of bidirectional response and ii) lower rates of false positives (1-specificity) when more than 10% of genes in the genome are differentially expressed (background noise). In a clinical proof-of-concept, personal treatment-specific pathways identified by kMEn correlate with therapeutic response (p-value<0.01). Conclusion Through improved single-subject transcriptome dynamics of bidirectionally-regulated signals, kMEn provides a novel

  14. AER image filtering

    NASA Astrophysics Data System (ADS)

    Gómez-Rodríguez, F.; Linares-Barranco, A.; Paz, R.; Miró-Amarante, L.; Jiménez, G.; Civit, A.

    2007-05-01

    Address Event Representation (AER) is an emergent neuromorphic interchip communication protocol that allows real-time virtual massive connectivity among huge number of neurons located on different chips.[1] By exploiting high speed digital communication circuits (with nano-seconds timing), synaptic neural connections can be time multiplexed, while neural activity signals (with mili-seconds timings) are sampled at low frequencies. Neurons generate "events" according to their activity levels. That is, more active neurons generate more events per unit time and access the interchip communication channel more frequently than neurons with low activity. In Neuromorphic system development, AER brings some advantages to develop real-time image processing system: (1) AER represents the information like time continuous stream not like a frame; (2) AER sends the most important information first (although this depends on the sender); (3) AER allows to process information as soon as it is received. When AER is used in artificial vision field, each pixel is considered like a neuron, so pixel's intensity is represented like a sequence of events; modifying the number and the frequency of these events, it is possible to make some image filtering. In this paper we present four image filters using AER: (a) Noise addition and suppression, (b) brightness modification, (c) single moving object tracking and (d) geometrical transformations (rotation, translation, reduction and magnification). For testing and debugging, we use USB-AER board developed by Robotic and Technology of Computers Applied to Rehabilitation (RTCAR) research group. This board is based on an FPGA, devoted to manage the AER functionality. This board also includes a micro-controlled for USB communication, 2 Mbytes RAM and 2 AER ports (one for input and one for output).

  15. Application of DFT Filter Banks and Cosine Modulated Filter Banks in Filtering

    NASA Technical Reports Server (NTRS)

    Lin, Yuan-Pei; Vaidyanathan, P. P.

    1994-01-01

    None given. This is a proposal for a paper to be presented at APCCAS '94 in Taipei, Taiwan. (From outline): This work is organized as follows: Sec. II is devoted to the construction of the new 2m channel under-decimated DFT filter bank. Implementation and complexity of this DFT filter bank are discussed therein. IN a similar manner, the new 2m channel cosine modulated filter bank is discussed in Sec. III. Design examples are given in Sec. IV.

  16. The double well mass filter

    DOE PAGES

    Gueroult, Renaud; Rax, Jean -Marcel; Fisch, Nathaniel J.

    2014-02-03

    Various mass filter concepts based on rotating plasmas have been suggested with the specific purpose of nuclear waste remediation. We report on a new rotating mass filter combining radial separation with axial extraction. Lastly, the radial separation of the masses is the result of a “double-well” in effective radial potential in rotating plasma with a sheared rotation profile.

  17. Solid colloidal optical wavelength filter

    DOEpatents

    Alvarez, Joseph L.

    1992-01-01

    A solid colloidal optical wavelength filter includes a suspension of spheal particles dispersed in a coagulable medium such as a setting plastic. The filter is formed by suspending spherical particles in a coagulable medium; agitating the particles and coagulable medium to produce an emulsion of particles suspended in the coagulable medium; and allowing the coagulable medium and suspended emulsion of particles to cool.

  18. BMP FILTERS: UPFLOW VS. DOWNFLOW

    EPA Science Inventory

    Filtration methods have been found to be effective in reducing pollutant levels in stormwater. The main drawback of these methods is that the filters get clogged frequently and require periodical maintenance. In stormwater treatment, because of the cost of pumping, the filters ar...

  19. Filter desulfation system and method

    DOEpatents

    Lowe, Michael D.; Robel, Wade J.; Verkiel, Maarten; Driscoll, James J.

    2010-08-10

    A method of removing sulfur from a filter system of an engine includes continuously passing an exhaust flow through a desulfation leg of the filter system during desulfation. The method also includes sensing at least one characteristic of the exhaust flow and modifying a flow rate of the exhaust flow during desulfation in response to the sensing.

  20. Vectorization of linear discrete filtering algorithms

    NASA Technical Reports Server (NTRS)

    Schiess, J. R.

    1977-01-01

    Linear filters, including the conventional Kalman filter and versions of square root filters devised by Potter and Carlson, are studied for potential application on streaming computers. The square root filters are known to maintain a positive definite covariance matrix in cases in which the Kalman filter diverges due to ill-conditioning of the matrix. Vectorization of the filters is discussed, and comparisons are made of the number of operations and storage locations required by each filter. The Carlson filter is shown to be the most efficient of the filters on the Control Data STAR-100 computer.

  1. Removing EDB with GAC filters

    SciTech Connect

    Narbaitz, R.M.; Baratta, A.; Parsons, F.Z. )

    1994-08-01

    Nearly 1,000 point-of-entry granular activated carbon (GAC) filters are efficiently removing ethylene dibromide (EDB) from contaminated groundwater throughout Florida. This article discusses the design, performance, and operational problems of the filters and assesses the possibility of extending the interval between GAC replacement from the current six months. Few breakthroughs have occurred in these filters, and most were caused by desorption during periods of sharp decreases in well-water EDB concentrations. Because GAC loading data from the literature described the program data very well, they were used in conjunction with the equilibrium column model to predict the performance of the program's filters for different GAC replacement periods. Based on the most conservative estimates, maintenance for 50% of the filters could be extended to every nine months.

  2. An improved pinhole spatial filter

    SciTech Connect

    Estabrook, K.; Celliers, P.; Murray, J.; Wallace, R.; Stone, G.; Van Wonterghem, B.; MacGowan, B.; Da Silva, L.; Hunt, J.; Manes, K.

    1996-08-21

    Lasers generate phase aberrated light that can damage laser glass, frequency conversion crystals, lenses, and mirror coatings and can also reduce extractable energy and power. Spatial pinhole filters can partly eliminate such ``hot spots.`` Problems are that the pinhole closes during the laser pulse and has to be made too large initially. Debris from the pinhole can coat or damage spatial filter lenses. This paper presents a novel design for a more robust pinhole filter. Phase distorted (hot spot) light refracts at grazing incidence by plasma on the wall of a funnel shaped filter resulting in less absorption and debris. Refracted light absorbs at low intensities on the vacuum wall. We present 2D hydrodynamic computer simulations and compare the two types of filters with experiment.

  3. Sintered composite medium and filter

    DOEpatents

    Bergman, Werner

    1987-01-01

    A particulate filter medium is formed of a sintered composite of 0.5 micron diameter quartz fibers and 2 micron diameter stainless steel fibers. A preferred composition is about 40 vol. % quartz and about 60 vol. % stainless steel fibers. The media is sintered at about 1100.degree. C. to bond the stainless steel fibers into a cage network which holds the quartz fibers. High filter efficiency and low flow resistance are provided by the smaller quartz fibers. High strength is provided by the stainless steel fibers. The resulting media has a high efficiency and low pressure drop similar to the standard HEPA media, with tensile strength at least four times greater, and a maximum operating temperature of about 550.degree. C. The invention also includes methods to form the composite media and a HEPA filter utilizing the composite media. The filter media can be used to filter particles in both liquids and gases.

  4. Recycling used automotive oil filters

    NASA Astrophysics Data System (ADS)

    Peaslee, Kent D.

    1994-02-01

    Over 400 million used automotive oil filters are discarded in the United States each year, most of which are disposed of in landfills wasting valuable resources and risking contamination of ground- and surface-water supplies. This article summarizes U.S. bureau of Mines research evaluating scrap prepared from used automotive oil filters. Experimental results show that crushed and drained oil filters have a bulk density that is higher than many typical scrap grades, a chemical analysis low in residual elements (except tin due to use of tin plate in filters), and an overall yield, oil-filter scrap to cast steel, of 76% to 85%, depending on the method used to prepare the scrap.

  5. Computational color constancy using chromagenic filters in color filter arrays

    NASA Astrophysics Data System (ADS)

    Shrestha, Raju; Hardeberg, Jon Yngve

    2012-03-01

    We have proposed, in this paper, a new color constancy technique, an extension to the chromagenic color constancy. Chromagenic based illuminant estimation methods take two shots of a scene, one without and one with a specially chosen color filter in front of the camera lens. Here, we introduce chromagenic filters into the color filter array itself by placing them on top of R, G or B filters and replacing one of the two green filters in the Bayer's pattern with them. This allows obtaining two images of the same scene via demosaicking: a normal RGB image, and a chromagenic image, equivalent of RGB image with a chromagenic filter. The illuminant can then be estimated using chromagenic based illumination estimation algorithms. The method, we named as CFA based chromagenic color constancy (or 4C in short), therefore, does not require two shots and no registration issues involved unlike as in the other chromagenic based color constancy algorithms, making it more practical and useful computational color constancy method in many applications. Experiments show that the proposed color filter array based chromagenic color constancy method produces comparable results with the chromagenic color constancy without interpolation.

  6. Objects tracking with adaptive correlation filters and Kalman filtering

    NASA Astrophysics Data System (ADS)

    Ontiveros-Gallardo, Sergio E.; Kober, Vitaly

    2015-09-01

    Object tracking is commonly used for applications such as video surveillance, motion based recognition, and vehicle navigation. In this work, a tracking system using adaptive correlation filters and robust Kalman prediction of target locations is proposed. Tracking is performed by means of multiple object detections in reduced frame areas. A bank of filters is designed from multiple views of a target using synthetic discriminant functions. An adaptive approach is used to improve discrimination capability of the synthesized filters adapting them to multiple types of backgrounds. With the help of computer simulation, the performance of the proposed algorithm is evaluated in terms of detection efficiency and accuracy of object tracking.

  7. Electrothermally tunable MEMS filters

    NASA Astrophysics Data System (ADS)

    Prasad, A. V. S. S.; K. P., Venkatesh; Bhat, Navakanta; Pratap, Rudra

    2014-03-01

    MEMS resonators have potential application in the area of frequency selective devices (e.g., gyroscopes, mass sensors, etc.). In this paper, design of electro thermally tunable resonators is presented. SOIMUMPs process is used to fabricate resonators with springs (beams) and a central mass. When voltage is applied, due to joule heating, temperature of the conducting beams goes up. This results in increase of electrical resistance due to mobility degradation. Due to increase in the temperature, springs start softening and therefore the fundamental frequency decreases. So for a given structure, one can modify the original fundamental frequency by changing the applied voltage. Coupled thermal effects result in non-uniform heating. It is observed from measurements and simulations that some parts of the beam become very hot and therefore soften more. Consequently, at higher voltages, the structure (equivalent to a single resonator) behaves like coupled resonators and exhibits peak splitting. In this mode, the given resonator can be used as a band rejection filter. This process is reversible and repeatable. For the designed structure, it is experimentally shown that by varying the voltage from 1 to 16V, the resonant frequency could be changed by 28%.

  8. Bidirectional diffusion of ammonium and sodium cations in forward osmosis: role of membrane active layer surface chemistry and charge.

    PubMed

    Lu, Xinglin; Boo, Chanhee; Ma, Jun; Elimelech, Menachem

    2014-12-16

    Systematic fundamental understanding of mass transport in osmosis-driven membrane processes is important for further development of this emerging technology. In this work, we investigate the role of membrane surface chemistry and charge on bidirectional solute diffusion in forward osmosis (FO). In particular, bidirectional diffusion of ammonium (NH4(+)) and sodium (Na(+)) is examined using FO membranes with different materials and surface charge characteristics. Using an ammonium bicarbonate (NH4HCO3) draw solution, we observe dramatically enhanced cation fluxes with sodium chloride feed solution compared to that with deionized water feed solution for thin-film composite (TFC) FO membrane. However, the bidirectional diffusion of cations does not change, regardless of the type of feed solution, for cellulose triacetate (CTA) FO membrane. We relate this phenomenon to the membrane fixed surface charge by employing different feed solution pH to foster different protonation conditions for the carboxyl groups on the TFC membrane surface. Membrane surface modification is also carried out with the TFC membrane using ethylenediamine to alter carboxyl groups into amine groups. The modified TFC membrane, with less negatively charged groups, exhibits a significant decrease in the bidirectional diffusion of cations under the same conditions employed with the pristine TFC membrane. Based on our experimental observations, we propose Donnan dialysis as a mechanism responsible for enhanced bidirectional diffusion of cations in TFC membranes.

  9. High-temperature operation of broadband bidirectional terahertz quantum-cascade lasers

    PubMed Central

    Khanal, Sudeep; Gao, Liang; Zhao, Le; Reno, John L.; Kumar, Sushil

    2016-01-01

    Terahertz quantum cascade lasers (QCLs) with a broadband gain medium could play an important role for sensing and spectroscopy since then distributed-feedback schemes could be utilized to produce laser arrays on a single semiconductor chip with wide spectral coverage. QCLs can be designed to emit at two different frequencies when biased with opposing electrical polarities. Here, terahertz QCLs with bidirectional operation are developed to achieve broadband lasing from the same semiconductor chip. A three-well design scheme with shallow-well GaAs/Al0.10Ga0.90As superlattices is developed to achieve high-temperature operation for bidirectional QCLs. It is shown that shallow-well heterostructures lead to optimal quantum-transport in the superlattice for bidirectional operation compared to the prevalent GaAs/Al0.15Ga0.85As material system. Broadband lasing in the frequency range of 3.1–3.7 THz is demonstrated for one QCL design, which achieves maximum operating temperatures of 147 K and 128 K respectively in opposing polarities. Dual-color lasing with large frequency separation is demonstrated for a second QCL, that emits at ~3.7 THz and operates up to 121 K in one polarity, and at ~2.7 THz up to 105 K in the opposing polarity. These are the highest operating temperatures achieved for broadband terahertz QCLs at the respective emission frequencies, and could lead to commercial development of broadband terahertz laser arrays. PMID:27615416

  10. High-temperature operation of broadband bidirectional terahertz quantum-cascade lasers

    SciTech Connect

    Khanal, Sudeep; Gao, Liang; Zhao, Le; Reno, John L.; Kumar, Sushil

    2016-09-12

    Terahertz quantum cascade lasers (QCLs) with a broadband gain medium could play an important role for sensing and spectroscopy since then distributed-feedback schemes could be utilized to produce laser arrays on a single semiconductor chip with wide spectral coverage. QCLs can be designed to emit at two different frequencies when biased with opposing electrical polarities. Here, we develop terahertz QCLs with bidirectional operation to achieve broadband lasing from the same semiconductor chip. A three-well design scheme with shallow-well GaAs/Al0.10Ga0.90As superlattices is developed to achieve high-temperature operation for bidirectional QCLs. It is shown that shallow-well heterostructures lead to optimal quantum-transport in the superlattice for bidirectional operation compared to the prevalent GaAs/Al0.15Ga0.85As material system. Furthermore, broadband lasing in the frequency range of 3.1–3.7 THz is demonstrated for one QCL design, which achieves maximum operating temperatures of 147 K and 128 K respectively in opposing polarities. Dual-color lasing with large frequency separation is demonstrated for a second QCL, that emits at ~3.7 THz and operates up to 121 K in one polarity, and at ~2.7 THz up to 105 K in the opposing polarity. Finally, these are the highest operating temperatures achieved for broadband terahertz QCLs at the respective emission frequencies, and could lead to commercial development of broadband terahertz laser arrays.

  11. High-temperature operation of broadband bidirectional terahertz quantum-cascade lasers

    DOE PAGES

    Khanal, Sudeep; Gao, Liang; Zhao, Le; ...

    2016-09-12

    Terahertz quantum cascade lasers (QCLs) with a broadband gain medium could play an important role for sensing and spectroscopy since then distributed-feedback schemes could be utilized to produce laser arrays on a single semiconductor chip with wide spectral coverage. QCLs can be designed to emit at two different frequencies when biased with opposing electrical polarities. Here, we develop terahertz QCLs with bidirectional operation to achieve broadband lasing from the same semiconductor chip. A three-well design scheme with shallow-well GaAs/Al0.10Ga0.90As superlattices is developed to achieve high-temperature operation for bidirectional QCLs. It is shown that shallow-well heterostructures lead to optimal quantum-transport inmore » the superlattice for bidirectional operation compared to the prevalent GaAs/Al0.15Ga0.85As material system. Furthermore, broadband lasing in the frequency range of 3.1–3.7 THz is demonstrated for one QCL design, which achieves maximum operating temperatures of 147 K and 128 K respectively in opposing polarities. Dual-color lasing with large frequency separation is demonstrated for a second QCL, that emits at ~3.7 THz and operates up to 121 K in one polarity, and at ~2.7 THz up to 105 K in the opposing polarity. Finally, these are the highest operating temperatures achieved for broadband terahertz QCLs at the respective emission frequencies, and could lead to commercial development of broadband terahertz laser arrays.« less

  12. Consistency of Earth Radiation Budget Experiment bidirectional models and the observed anisotropy of reflected sunlight

    SciTech Connect

    Baldwin, D.G. ); Coakley, J.A. )

    1991-03-20

    The Earth Radiation Budget Experiment (ERBE) uses bidirectional models to estimate radiative fluxes from observed radiances. The anisotropy of the radiance field derived from these models is compared with that observed with the ERBE scanner on the Earth Radiation Budget Satellite (ERBS). The bidirectional models used by ERBE were derived from NIMBUS 7 Earth radiation budget (ERB) scanner observations. Because of probable differences in the radiometric calibrations of the ERB and ERBE scanners and because of differences in their field of view sizes, the authors expect to find systematic differences of a few percent between the NIMBUS 7 ERB-derived radiation field anisotropy and the ERBS scanner-observed anisotropy. The differences expected are small compared with the variability of the anisotropy which arises from the variability in cloud cover allowed to occur within the individual scene types. By averaging over groups of 40 ERBE scanner scan lines (equivalent to an average over approximately 2,000 km) for a period of a month, they detect significant differences between the modeled and observed anisotropy for particular scene types and Sun-Earth-satellite viewing geometries. For a typical 2.5{degree} latitude-longitude region these differences give rise to a bias in the radiative flux that is at least 0.3% for the monthly mean and an rms error that is at least 4% for instantaneous observations. By comparing the fluxes derived using the observed anisotropy with those derived assuming isotropic reflection, they conclude that a reasonable estimate for the maximum error due to the use of incorrect bidirectional models is a bias of approximately 4% for a typical 2.5{degree} latitude-longitude, monthly mean and an rms error of 15%.

  13. A Bidirectional Brain-Machine Interface Featuring a Neuromorphic Hardware Decoder

    PubMed Central

    Boi, Fabio; Moraitis, Timoleon; De Feo, Vito; Diotalevi, Francesco; Bartolozzi, Chiara; Indiveri, Giacomo; Vato, Alessandro

    2016-01-01

    Bidirectional brain-machine interfaces (BMIs) establish a two-way direct communication link between the brain and the external world. A decoder translates recorded neural activity into motor commands and an encoder delivers sensory information collected from the environment directly to the brain creating a closed-loop system. These two modules are typically integrated in bulky external devices. However, the clinical support of patients with severe motor and sensory deficits requires compact, low-power, and fully implantable systems that can decode neural signals to control external devices. As a first step toward this goal, we developed a modular bidirectional BMI setup that uses a compact neuromorphic processor as a decoder. On this chip we implemented a network of spiking neurons built using its ultra-low-power mixed-signal analog/digital circuits. On-chip on-line spike-timing-dependent plasticity synapse circuits enabled the network to learn to decode neural signals recorded from the brain into motor outputs controlling the movements of an external device. The modularity of the BMI allowed us to tune the individual components of the setup without modifying the whole system. In this paper, we present the features of this modular BMI and describe how we configured the network of spiking neuron circuits to implement the decoder and to coordinate it with the encoder in an experimental BMI paradigm that connects bidirectionally the brain of an anesthetized rat with an external object. We show that the chip learned the decoding task correctly, allowing the interfaced brain to control the object's trajectories robustly. Based on our demonstration, we propose that neuromorphic technology is mature enough for the development of BMI modules that are sufficiently low-power and compact, while being highly computationally powerful and adaptive. PMID:28018162

  14. Effect of bidirectional mechanoelectrical coupling on spontaneous oscillations and sensitivity in a model of hair cells

    NASA Astrophysics Data System (ADS)

    Amro, Rami M.; Neiman, Alexander B.

    2014-11-01

    Sensory hair cells of amphibians exhibit spontaneous activity in their hair bundles and membrane potentials, reflecting two distinct active amplification mechanisms employed in these peripheral mechanosensors. We use a two-compartment model of the bullfrog's saccular hair cell to study how the interaction between its mechanical and electrical compartments affects the emergence of distinct dynamical regimes, and the role of this interaction in shaping the response of the hair cell to weak mechanical stimuli. The model employs a Hodgkin-Huxley-type system for the basolateral electrical compartment and a nonlinear hair bundle oscillator for the mechanical compartment, which are coupled bidirectionally. In the model, forward coupling is provided by the mechanoelectrical transduction current, flowing from the hair bundle to the cell soma. Backward coupling is due to reverse electromechanical transduction, whereby variations of the membrane potential affect adaptation processes in the hair bundle. We isolate oscillation regions in the parameter space of the model and show that bidirectional coupling affects significantly the dynamics of the cell. In particular, self-sustained oscillations of the hair bundles and membrane potential can result from bidirectional coupling, and the coherence of spontaneous oscillations can be maximized by tuning the coupling strength. Consistent with previous experimental work, the model demonstrates that dynamical regimes of the hair bundle change in response to variations in the conductances of basolateral ion channels. We show that sensitivity of the hair cell to weak mechanical stimuli can be maximized by varying coupling strength, and that stochasticity of the hair bundle compartment is a limiting factor of the sensitivity.

  15. High-temperature operation of broadband bidirectional terahertz quantum-cascade lasers

    NASA Astrophysics Data System (ADS)

    Khanal, Sudeep; Gao, Liang; Zhao, Le; Reno, John L.; Kumar, Sushil

    2016-09-01

    Terahertz quantum cascade lasers (QCLs) with a broadband gain medium could play an important role for sensing and spectroscopy since then distributed-feedback schemes could be utilized to produce laser arrays on a single semiconductor chip with wide spectral coverage. QCLs can be designed to emit at two different frequencies when biased with opposing electrical polarities. Here, terahertz QCLs with bidirectional operation are developed to achieve broadband lasing from the same semiconductor chip. A three-well design scheme with shallow-well GaAs/Al0.10Ga0.90As superlattices is developed to achieve high-temperature operation for bidirectional QCLs. It is shown that shallow-well heterostructures lead to optimal quantum-transport in the superlattice for bidirectional operation compared to the prevalent GaAs/Al0.15Ga0.85As material system. Broadband lasing in the frequency range of 3.1–3.7 THz is demonstrated for one QCL design, which achieves maximum operating temperatures of 147 K and 128 K respectively in opposing polarities. Dual-color lasing with large frequency separation is demonstrated for a second QCL, that emits at ~3.7 THz and operates up to 121 K in one polarity, and at ~2.7 THz up to 105 K in the opposing polarity. These are the highest operating temperatures achieved for broadband terahertz QCLs at the respective emission frequencies, and could lead to commercial development of broadband terahertz laser arrays.

  16. Bidirectional Relationships and Disconnects between NAFLD and Features of the Metabolic Syndrome.

    PubMed

    Wainwright, Patrick; Byrne, Christopher D

    2016-03-11

    Non-alcoholic fatty liver disease (NAFLD) represents a wide spectrum of liver disease from simple steatosis, to steatohepatitis, (both with and without liver fibrosis), cirrhosis and end-stage liver failure. NAFLD also increases the risk of hepatocellular carcinoma (HCC) and both HCC and end stage liver disease may markedly increase risk of liver-related mortality. NAFLD is increasing in prevalence and is presently the second most frequent indication for liver transplantation. As NAFLD is frequently associated with insulin resistance, central obesity, dyslipidaemia, hypertension and hyperglycaemia, NAFLD is often considered the hepatic manifestation of the metabolic syndrome. There is growing evidence that this relationship between NAFLD and metabolic syndrome is bidirectional, in that NAFLD can predispose to metabolic syndrome features, which can in turn exacerbate NAFLD or increase the risk of its development in those without a pre-existing diagnosis. Although the relationship between NAFLD and metabolic syndrome is frequently bidirectional, recently there has been much interest in genotype/phenotype relationships where there is a disconnect between the liver disease and metabolic syndrome features. Such potential examples of genotypes that are associated with a dissociation between liver disease and metabolic syndrome are patatin-like phospholipase domain-containing protein-3 (PNPLA3) (I148M) and transmembrane 6 superfamily member 2 protein (TM6SF2) (E167K) genotypes. This review will explore the bidirectional relationship between metabolic syndrome and NAFLD, and will also discuss recent insights from studies of PNPLA3 and TM6SF2 genotypes that may give insight into how and why metabolic syndrome features and liver disease are linked in NAFLD.

  17. Adaptive filtering with correlated state noise

    NASA Technical Reports Server (NTRS)

    Argentiero, P.

    1972-01-01

    An adaptive filter which uses a minimum variance criteria to estimate state noise covariance is presented. It is not necessary to assume white state noise in order to implement the filter. Simulation results are given which demonstrate that the filter tracks a satellite in the presence of modeling errors better than a conventional minimum variance filter with state noise. It is also shown that the propagated convariance matrix of the filter is an accurate indicator of the filter's performance.

  18. ADVANCED HOT GAS FILTER DEVELOPMENT

    SciTech Connect

    E.S. Connolly; G.D. Forsythe

    2000-09-30

    DuPont Lanxide Composites, Inc. undertook a sixty-month program, under DOE Contract DEAC21-94MC31214, in order to develop hot gas candle filters from a patented material technology know as PRD-66. The goal of this program was to extend the development of this material as a filter element and fully assess the capability of this technology to meet the needs of Pressurized Fluidized Bed Combustion (PFBC) and Integrated Gasification Combined Cycle (IGCC) power generation systems at commercial scale. The principal objective of Task 3 was to build on the initial PRD-66 filter development, optimize its structure, and evaluate basic material properties relevant to the hot gas filter application. Initially, this consisted of an evaluation of an advanced filament-wound core structure that had been designed to produce an effective bulk filter underneath the barrier filter formed by the outer membrane. The basic material properties to be evaluated (as established by the DOE/METC materials working group) would include mechanical, thermal, and fracture toughness parameters for both new and used material, for the purpose of building a material database consistent with what is being done for the alternative candle filter systems. Task 3 was later expanded to include analysis of PRD-66 candle filters, which had been exposed to actual PFBC conditions, development of an improved membrane, and installation of equipment necessary for the processing of a modified composition. Task 4 would address essential technical issues involving the scale-up of PRD-66 candle filter manufacturing from prototype production to commercial scale manufacturing. The focus would be on capacity (as it affects the ability to deliver commercial order quantities), process specification (as it affects yields, quality, and costs), and manufacturing systems (e.g. QA/QC, materials handling, parts flow, and cost data acquisition). Any filters fabricated during this task would be used for product qualification tests

  19. Attitude Representations for Kalman Filtering

    NASA Technical Reports Server (NTRS)

    Markley, F. Landis; Bauer, Frank H. (Technical Monitor)

    2001-01-01

    The four-component quaternion has the lowest dimensionality possible for a globally nonsingular attitude representation, it represents the attitude matrix as a homogeneous quadratic function, and its dynamic propagation equation is bilinear in the quaternion and the angular velocity. The quaternion is required to obey a unit norm constraint, though, so Kalman filters often employ a quaternion for the global attitude estimate and a three-component representation for small errors about the estimate. We consider these mixed attitude representations for both a first-order Extended Kalman filter and a second-order filter, as well for quaternion-norm-preserving attitude propagation.

  20. Advanced simulation of digital filters

    NASA Astrophysics Data System (ADS)

    Doyle, G. S.

    1980-09-01

    An Advanced Simulation of Digital Filters has been implemented on the IBM 360/67 computer utilizing Tektronix hardware and software. The program package is appropriate for use by persons beginning their study of digital signal processing or for filter analysis. The ASDF programs provide the user with an interactive method by which filter pole and zero locations can be manipulated. Graphical output on both the Tektronix graphics screen and the Versatec plotter are provided to observe the effects of pole-zero movement.