Science.gov

Sample records for al registro del

  1. Primer registro para Peru del genero Nielsonia Young, 1977 (Hemiptera: Cicadellidae: Cicadellinae: Cicadellini)

    Technology Transfer Automated Retrieval System (TEKTRAN)

    En este articulo se reporta por primera vez para el Peru una especies del genero Nielsonia Young, 1977, de material procedente del Departamento de Tumbes. El genero ha sido reportada anteriormente de Ecuador, como unico registro para Sudamerica, y America Central. El unico especimen hembra encontra...

  2. Observación y registro fotográfico del cometa HYAKUTAKE C/1996 B2

    NASA Astrophysics Data System (ADS)

    Arquiola, A. P.; Arquiola, F. E.

    Desde el momento en que nos llega la información del descubrimiento, comenzamos la observación de forma detallada a fin de apreciar y seguir su creciente actividad. La primera observación se realizó el 17 de febrero de 1996 a las 4h20m UT con nuestro telescopio de 300mm newtoniano de f/6.5, con una muy buena transparencia atmosférica, estimando una magnitud de 8.5. Realizábamos observaciones casi todas las noches, mientras nos lo permitían las condiciones climáticas. Ya el 26 de febrero el cometa presentaba un aspecto muy particular, ligeramente distinto a las primeras observaciones, ya que comenzamos a notar su gran actividad. En primer lugar se destacaba la cola de iones mucho mas extensa que la cola de polvo. Magnitud estimada 7.5. El 19 de marzo ya era visible a simple vista y en especial su cola muy abierta y extensa (3 grados) y no quedaba duda alguna que la última noche de observación del cometa en el horizonte de la Ciudad de Funes, que fue el 24 de marzo de 1996, un día antes del acercamiento a la Tierra, tendríamos una apreciación del cometa en su máximo esplendor. El 24 de marzo de 1996 a las 4hs UT, asomó el cometa por el horizonte NE, con su cola espectacular, llegando a medir 23 grados de longitud, muy recta y brillante, y su cabellera muy estelar. A este marco de observación se sumaron mas de 600 personas que participaron usando instrumentos, siendo la mayoría de los concurrentes de la vecina Ciudad de Rosario, ya que su observación era a muy baja atura sobre el horizonte norte. Instrumentos utilizados : Telescopio Newtoniano 300mm f/6.5, Telescopio Schmidt-Cassegrain 200mm , Binoculares 10 x 50, 7 x 50, Lente normal 50mm a f/1.8, Película 100 - 400 ASA Lugar de Observación : Ciudad de Funes, zona rural, ``Estancia La Polola" Latitud: - 32o 55' Longitud: 60o 40' Oeste

  3. Extensión del Formalismo de Orbitales de Defecto Cuántico al tratamiento del efecto Stark (SQDO).

    NASA Astrophysics Data System (ADS)

    Menéndez, J. M.; Martín, I.; Velasco, A. M.

    El estudio experimental de las interacciones de átomos Rydberg altamente excitados con campos eléctricos ha experimentado un creciente interés durante las dos últimas décadas debido, en gran medida, al desarrollo de nuevas técnicas para crear y estudiar átomos Rydberg en el laboratorio. Acompañando a estas nuevas técnicas experimentales, es necesario el desarrollo de modelos teóricos que nos permitan contrastar sus medidas y conocer mejor los fundamentos de los mismos. Desde el punto de vista teórico el conocimiento del desdoblamiento de los niveles energéticos de un átomo en función de la magnitud del campo eléctrico aplicado (lo que se conoce como mapa Stark) es el mejor punto de partida para la descripción del sistema y un prerrequisito fundamental para el cálculo de distintas propiedades atómicas en presencia del campo eléctrico tales como intensidades de transición, umbrales de ionización de campo eléctrico, tiempos de vida, posición y anchura de cruces evitados, etc. En este trabajo presentamos la adaptación del método de orbitales de defecto cuántico [1,2,3] al tratamiento del efecto Stark (SQDO) [4] y su aplicación al cálculo de los desdoblamientos energéticos y fuerzas de oscilador de estados Rydberg en los átomos de Li, Na y K. El propósito de este estudio es, por un lado, desarrollar métodos fiables para la determinación de propiedades atómicas en presencia de campos eléctricos y, por otro, mostrar la fiabilidad de las funciones de onda QDO en la descripción del efecto Stark en sistemas atómicos.

  4. EMBO workshop al fin del mundo: a meeting on membrane trafficking and its implication for polarity and diseases.

    PubMed

    Marzolo, María-Paz; Faundez, Victor; Galli, Thierry

    2015-07-01

    The EMBO worskhop at the "end of the world'" (al fin del mundo), a meeting on membrane trafficking and its implication for polarity and diseases, took place in the Chilean Patagonia surrounded by the landscapes once witnessed by Charles Darwin. The meeting showcased some of the best membrane trafficking science with an emphasis in neuroscience and disease models. Speakers from Europe, USA, South America and the graduate students behind it; embarked on an enthusiastic and eclectic dialog where a wide range of cell types, model genetic systems, and diseases where discussed. This meeting demonstrated the power of trafficking concepts to integrate diverse biology and to formulate mechanisms of normal and disease cells.

  5. Tratamiento del cáncer sin daño al corazón

    Cancer.gov

    Investigadores de los campos de oncología y de cardiología están trabajando para encontrar formas de impedir, manejar y posiblemente aun revertir los efectos secundarios cardiovasculares de ciertas terapias del cáncer.

  6. Contribución al flujo infrarrojo de las estrellas Be de la recombinación dielectrónica del MgII

    NASA Astrophysics Data System (ADS)

    Cruzado, A.; di Rocco, H.; Ringuelet, A.

    Para evaluar la contribución del proceso de recombinación dielectrónica del átomo de MgII al exceso de flujo infrarrojo observado en las estrellas Be, calculamos la energía emitida en las líneas originadas por este proceso. Se evaluaron los efectos de las condiciones físicas del medio, como la temperatura electrónica y la densidad electrónica, sobre el flujo emitido. Se consideró también la influencia de una posible opacidad.

  7. Estudio del Hidrógeno neutro en dirección al remanente de supernova W28

    NASA Astrophysics Data System (ADS)

    Dubner, G.; Velazquez, P.; Green, A.; Goss, W. M.; Reynoso, E.

    Se presenta un relevamiento del hidrógeno neutro alrededor del remanente de supernova W28 realizado con el radiotelescopio australiano de Parkes. Se analizan rasgos de emisión y absorción. Se muestra la existencia de estructuras anulares asociadas con el remanente. Se compara la distribución del hidrógeno neutro con la ubicación de máseres de OH detectados en la línea de 1720 MHz.

  8. Agregación de para-H2 en chorros supersónicos: del dímero al sólido

    NASA Astrophysics Data System (ADS)

    María Fernández, José

    En este trabajo se mostrarán los estudios de expansiones supersónicas de para-H2 desde toberas criogénicas, realizados en el laboratorio de Fluidodinámica Molecular del IEM. Hemos registrado los espectros Raman de dichas expansiones en el intervalo de frecuencias de 4145 a 4162 cm-1, próximo a la línea Q(0) del monómero no rotante H2, a 4161.18 cm-1. En el espectro Raman, además de la línea Q(0) del monómero, se observan unos picos débiles, que, por su comportamiento con la temperatura de la tobera y la distancia a la misma, asignamos a la transición homóloga en agregados de p-H2. Dependiendo de las condiciones, se observan agregados pequeños (de 2 a 13 moléculas de p-H2), agregados medios y masivos, y se llega incluso al líquido y al sólido. Las asignaciones se apoyan en un modelo sencillo, basado en la perturbación, debida al potencial intermolecular, de los estados vibracionales v=0 y v=1 en los agregados de p-H2. Se mostrarán detalles de la instalación experimental, ejemplos de los espectros obtenidos en diversas condiciones, y detalles de la interpretación cuantitativa.

  9. Determinacion de periodos fundamentales del suelo mediante vibraciones ambientales en el municipio de Humacao, Puerto Rico

    NASA Astrophysics Data System (ADS)

    Cintron Aponte, Rommel

    La tecnica de Nakamura ha sido utilizada a nivel mundial para determinar periodos fundamentales del suelo. La tecnica consiste en calcular y graficar cocientes espectrales H/V de vibraciones ambientales registradas sobre el suelo. Mediciones de vibraciones ambientales fueron tomadas en 151 lugares dentro del municipio de Humacao, localizado al este de Puerto Rico. Los datos se procesaron utilizando espectros de Fourier y espectros de potencia. La tecnica fue validada al compararla con los resultados de cocientes espectrales H/V de registros de sismos debiles y tambien con una modelacion numerica realizada con datos de un ensayo "downhole". Las graficas de los cocientes espectrales H/V fueron divididas en casos y grupos, los cuales dependen de la facilidad para identificar el periodo fundamental pico y amplitudes en frecuencias menores de 1 Hz, respectivamente. Los resultados obtenidos con ambos espectros fueron comparados y se concluye que los mismos se complementan para proveer resultados mas confiables. Se crearon mapas de periodos fundamentales, factores de amplitud, isoperiodos y clasificacion sismica de sitio. Los mapas de isoperiodos fueron realizados en las zonas mas pobladas sobre depositos de suelo. El mapa de periodos fundamentales del suelo mostro buena correlacion con la geologia local. El mapa de clasificacion sismica derivado de periodos de sitio fue comparado con el mapa de clasificacion sismica derivado de barrenos geotecnicos. El mapa de clasificacion obtenido de periodos puede sobreestimar un poco algunas clasificaciones del suelo. Sin embargo, este mapa puede proveer un estimado aproximado de la velocidad de onda de corte promedio del suelo hasta una profundidad de 100 pies (30 metros).

  10. Evaluación de la utilidad diagnóstica de la versión española del cuestionario al informador «AD8»☆

    PubMed Central

    Pardo, C. Carnero; de la Vega Cotarelo, R.; Alcalde, S. López; Aparicio, C. Martos; Carrillo, R. Vílchez; Gavilán, E. Mora; Galvin, J.E.

    2012-01-01

    Introducción El AD8 es un cuestionario al informador breve que puede ser autoaplicado y facilita la identificación de deterioro cognitivo (DC); nuestro objetivo es evaluar la utilidad diagnóstica (UD) de una versión española. Material y métodos Estudio transversal en una muestra clínica de díadas paciente/ informador, 330 sujetos con sospecha de DC o demencia (DEM) y 71 controles. Se ha evaluado la consistencia interna (α de Cronbach) y la validez (correlaciones parciales con estadio GDS, Fototest e índice funcional [IF]). La UD se ha evaluado para no DC vs DC (GDS 3–4) por medio del área bajo la curva ROC (aROC) y se ha considerado mejor punto de corte aquel que hacía máximo el índice de Youden. Resultados En la muestra, 105 no tenían DC, 99 tenían DC sin DEM y 203 DEM. La consistencia interna es alta (α 0,90, IC del 95%, 0,89–0,92), al igual que las correlaciones con GDS (r = 0,72, p < 0,001), Fototest (r = −0,61, p < 0,001) e IF (r = 0,59, p < 0,001). El aROC del AD8 es 0,90 (IC del 95%, 0,86–0,93), sin diferencia significativa con la del Fototest (aROC 0,93, IC del 95%, 0,89–0,96); el mejor punto de corte es 3/4 con sensibilidad de 0,93 (IC del 95%, 0,88–0,96), especificidad de 0,81 (IC del 95%, 0,72–0,88) y el 88,8% de las clasificaciones correctas. El uso conjunto de AD8 y Fototest mejora de forma significativa la UD de ambos (aROC 0,96, IC del 95%, 0,93–0,98, p < 0,05). Conclusiones La versión española del AD8 conserva las cualidades psicométricas y la UD de la versión original; su uso combinado con el Fototest mejora de forma significativa la UD de ambos. PMID:22652137

  11. Adaptive Calibration of Children's Physiological Responses to Family Stress: The Utility of Evolutionary Developmental Theory--Comment on Del Giudice et al. (2012) and Sturge-Apple et al. (2012)

    ERIC Educational Resources Information Center

    Bugental, Daphne Blunt

    2012-01-01

    Children's physiological reactions to stress are presented from the broader theoretical perspective of adaptive calibration to the environment, as rooted in life history theory. Del Giudice, Hinnant, Ellis, and El-Sheikh (2012) focus on children's physiological responses to a stressful task as a consequence of their history of family stress.…

  12. Adaptive calibration of children's physiological responses to family stress: the utility of evolutionary developmental theory: comment on Del Giudice et al. (2012) and Sturge-Apple et al. (2012).

    PubMed

    Bugental, Daphne Blunt

    2012-05-01

    Children's physiological reactions to stress are presented from the broader theoretical perspective of adaptive calibration to the environment, as rooted in life history theory. Del Giudice, Hinnant, Ellis, and El-Sheikh (2012) focus on children's physiological responses to a stressful task as a consequence of their history of family stress. Sturge-Apple, Davies, Martin, Cicchetti, and Hentges (2012) focus on the ways that children respond to a novel laboratory manipulation as a combined function of their temperament patterns and the harshness of their parental environment. The theoretical perspective employed provides an overarching framework that not only accounts for the findings presented here but also has heuristic value for future research on responses to early environmental risk. Future work in this area will benefit by inclusion of additional sympathetic nervous system (SNS) markers and neurotransmitters, inclusion of the role of gene expression in adaptive calibration, broader consideration of protective factors in the child's environment, and longitudinal work demonstrating the effects of adaptive calibration on children's future life history strategies and outcomes.

  13. ALS Association

    MedlinePlus

    ... toward a world without ALS! Walk to Defeat ALS® Walk to Defeat ALS® draws people of all ... We need your help. I Will Advocate National ALS Registry The National ALS Registry is a congressionally ...

  14. Estudio del CH interestelar

    NASA Astrophysics Data System (ADS)

    Olano, C.; Lemarchand, G.; Sanz, A. J.; Bava, J. A.

    El objetivo principal de este proyecto consiste en el estudio de la distribución y abundancia del CH en nubes interestelares a través de la observación de las líneas hiperfinas del CH en 3,3 GHz. El CH es una molécula de amplia distribución en el espacio interestelar y una de las pocas especies que han sido observadas tanto con técnicas de radio como ópticas. Desde el punto de vista tecnológico se ha desarrollado un cabezal de receptor que permitirá la realización de observaciones polarimétricas en la frecuencia de 3,3 GHz, con una temperatura del sistema de 60 K y un ancho de banda de 140 MHz, y que será instalado en el foco primario de la antena parabólica del IAR. El cabezal del receptor es capaz de detectar señales polarizadas, separando las componentes de polarización circular derecha e izquierda. Para tal fin el cabezal consta de dos ramas receptoras que amplificarán la señal y la trasladarán a una frecuencia más baja (frecuencia intermedia), permitiendo de esa forma un mejor transporte de la señal a la sala de control para su posterior procesamiento. El receptor además de tener características polarimétricas, podrá ser usado en el continuo y en la línea, utilizando las ventajas observacionales y de procesamiento de señal que actualmente posee el IAR.

  15. ALS - resources

    MedlinePlus

    Resources - ALS ... The following organizations are good resources for information on amyotrophic lateral sclerosis : Muscular Dystrophy Association -- mda.org/disease/amyotrophic-lateral-sclerosis National Amyotrophic Lateral Sclerosis (ALS) Registry -- ...

  16. [Current status of alternative therapies renal function at the Instituto Mexicano del Seguro Social].

    PubMed

    Méndez-Durán, Antonio; Ignorosa-Luna, Manuel Humberto; Pérez-Aguilar, Gilberto; Rivera-Rodríguez, Francisco Jesús; González-Izquierdo, José Jesús; Dávila-Torres, Javier

    2016-01-01

    Introducción: el IMSS realiza de manera sistemática la actualización de datos de los pacientes en terapias sustitutivas de la función renal (TSFR) mediante un registro electrónico denominado: Censo de administración de pacientes con Insuficiencia Renal Crónica (CIRC), cuyo objetivo es conocer la prevalencia de pacientes con insuficiencia renal crónica y el comportamiento de las TSFR en el IMSS. Métodos: estudio retrospectivo, incluye 212 hospitales de segundo nivel con programas de diálisis, pacientes pediátricos y adultos. Datos obtenidos del CIRC de enero a diciembre de 2014, cédulas numeral y nominal de diálisis peritoneal (DP) y hemodiálisis (HD). Se identifica prevalencia de pacientes y terapias por delegación, distribución por género y edad, causa de la enfermedad renal, la morbilidad y mortalidad. Resultados: 55 101 pacientes, de los cuales fueron 29 924 masculinos (54 %) y 25 177 femeninos (46 %); edad promedio 62.1 años (rng: 4 a 90); pensionados 20 387 (36.9 %). Las causas de la insuficiencia renal fueron: diabetes 29 054 (52.7 %), hipertensión arterial 18 975 (34.4%), glomerulopatías crónicas 3951 (7.2 %), riñones poliquísticos 1142 (2.1 %), congénitos 875 (1.6 %), y otras 1104 (2 %). La HD se otorgó en 41 % de los pacientes y la DP al 59 % restante; el costo anual fue de 5 608 290 622 pesos. Conclusiones: la prevalencia incrementada de diabetes mellitus e hipertensión arterial repercuten en el inicio de una TSFR, las cuales muestran un panorama financiero catastrófico para el Instituto.

  17. Al Composites

    NASA Astrophysics Data System (ADS)

    Chandanayaka, Tharaka; Azarmi, Fardad

    2014-05-01

    In the present study, cold spraying technique was used to fabricate a metal matrix composite (MMC) that consists of Ni matrix and 20 vol.% Ni3Al particles at two different particle sizes as reinforcement. This study intends to investigate the effect of reinforcement particle size on microstructural and mechanical properties of cold sprayed MMCs. Two different Ni3Al powders with nominal particle size of -45 to +5 and +45 to 100 μm were used as reinforcement in this study. Cold sprayed Ni-Ni3Al samples were subjected to the microstructural observation and characterization prior to any mechanical testing. Then, samples were tested using nano-indentation, Knoop hardness, Vickers hardness, and Resonance frequency to evaluate their mechanical properties. No significant changes were observed in microstructural characteristics due to different particle sizes. The results obtained from a variety of mechanical testings indicated that the increasing reinforcement particle size resulted in the slight reduction of mechanical properties such as elastic modulus and hardness in cold sprayed MMCs. The mechanical interlock between deposited particles defines the bonding strength in cold sprayed samples. Small size particles have a higher velocity and impact resulting in stronger interlock between deformed particles.

  18. Stent thrombosis: incidence and related factors in the R.I.S.E. Registry(Registro Impianto Stent Endocoronarico)

    PubMed

    De Servi, S; Repetto, S; Klugmann, S; Bossi, I; Colombo, A; Piva, R; Giommi, L; Bartorelli, A; Fontanelli, A; Mariani, G; Klersy, C

    1999-01-01

    Although stent thrombosis has been greatly reduced by adequate stent expansion with high-pressure balloon inflations and by the use of antiplatelet drugs, this event is still frightening, as it may lead to acute myocardial ischemia resulting in acute myocardial infarction or sudden death. Therefore, the definition of factors associated with stent thrombosis may provide a better understanding of the mechanisms underlying this phenomenon and may permit us to define therapeutic strategies to further reduce its occurrence. The purpose of this study was to assess factors responsible for the occurrence of stent thrombosis after coronary stent implantation in 939 consecutive patients enrolled in the Registro Impianto Stent Endocoronarico (R.I.S.E. Study Group). Consecutive patients undergoing coronary stent implantation at 16 medical centers in Italy were prospectively enrolled in the registry. Clinical data, and qualitative and quantitative angiographic findings were obtained from data collected in case report forms at each investigator site. The study group consisted of 781 men and 158 women with a mean age of 59 yr: 1,392 stents were implanted in 1,006 lesions and expanded at a maximal inflation pressure of 14.7 +/- 3 atm. The great majority of patients (92%) received only antiplatelet drugs after coronary stenting. During hospitalization there were 45 major ischemic complications in 39 patients (4.2%): 13 events were related to acute or subacute thrombosis (1.4%). Another stent thrombotic event occurred in the first month of follow-up. On multivariate logistic regression analysis, stent thrombosis was related to the following factors: unplanned stenting (OR 3.46, 95% CI 1.65-7.23), unstable angina (OR 3.37, 95% CI 1.11-10.14) and maximal inflation pressure (OR 0.83, 95% CI 0.75-0.93). In conclusion, this registry shows that in an unselected population of patients undergoing coronary stenting, stent thrombosis occurs in less than 2% of patients and is significantly

  19. Se evitaron casi 800 000 muertes por descenso del tabaquismo

    Cancer.gov

    Programas y estrategias de control del tabaco del siglo XX fueron responsables de la prevención de más de 795 000 muertes por cáncer de pulmón en Estados Unidos de 1975 al 2000. Si todo el tabaquismo en este país hubiera cesado después de la publicación d

  20. LaAlO3 stoichiometry is key to electron liquid formation at LaAlO3/SrTiO3 interfaces.

    PubMed

    Warusawithana, M P; Richter, C; Mundy, J A; Roy, P; Ludwig, J; Paetel, S; Heeg, T; Pawlicki, A A; Kourkoutis, L F; Zheng, M; Lee, M; Mulcahy, B; Zander, W; Zhu, Y; Schubert, J; Eckstein, J N; Muller, D A; Hellberg, C Stephen; Mannhart, J; Schlom, D G

    2013-01-01

    Emergent phenomena, including superconductivity and magnetism, found in the two-dimensional electron liquid (2-DEL) at the interface between the insulators lanthanum aluminate (LaAlO3) and strontium titanate (SrTiO3) distinguish this rich system from conventional 2D electron gases at compound semiconductor interfaces. The origin of this 2-DEL, however, is highly debated, with focus on the role of defects in the SrTiO3, while the LaAlO3 has been assumed perfect. Here we demonstrate, through experiments and first-principle calculations, that the cation stoichiometry of the nominal LaAlO3 layer is key to 2-DEL formation: only Al-rich LaAlO3 results in a 2-DEL. Although extrinsic defects, including oxygen deficiency, are known to render LaAlO3/SrTiO3 samples conducting, our results show that in the absence of such extrinsic defects an interface 2-DEL can form. Its origin is consistent with an intrinsic electronic reconstruction occurring to counteract a polarization catastrophe. This work provides insight for identifying other interfaces where emergent behaviours await discovery.

  1. LaAlO3 stoichiometry is key to electron liquid formation at LaAlO3/SrTiO3 interfaces

    NASA Astrophysics Data System (ADS)

    Warusawithana, M. P.; Richter, C.; Mundy, J. A.; Roy, P.; Ludwig, J.; Paetel, S.; Heeg, T.; Pawlicki, A. A.; Kourkoutis, L. F.; Zheng, M.; Lee, M.; Mulcahy, B.; Zander, W.; Zhu, Y.; Schubert, J.; Eckstein, J. N.; Muller, D. A.; Hellberg, C. Stephen; Mannhart, J.; Schlom, D. G.

    2013-08-01

    Emergent phenomena, including superconductivity and magnetism, found in the two-dimensional electron liquid (2-DEL) at the interface between the insulators lanthanum aluminate (LaAlO3) and strontium titanate (SrTiO3) distinguish this rich system from conventional 2D electron gases at compound semiconductor interfaces. The origin of this 2-DEL, however, is highly debated, with focus on the role of defects in the SrTiO3, while the LaAlO3 has been assumed perfect. Here we demonstrate, through experiments and first-principle calculations, that the cation stoichiometry of the nominal LaAlO3 layer is key to 2-DEL formation: only Al-rich LaAlO3 results in a 2-DEL. Although extrinsic defects, including oxygen deficiency, are known to render LaAlO3/SrTiO3 samples conducting, our results show that in the absence of such extrinsic defects an interface 2-DEL can form. Its origin is consistent with an intrinsic electronic reconstruction occurring to counteract a polarization catastrophe. This work provides insight for identifying other interfaces where emergent behaviours await discovery.

  2. Manual del McVCO 1999

    USGS Publications Warehouse

    McChesney, P.J.

    1999-01-01

    El McVCO es un generador de frecuencias basado en un microcontrolador que reemplaza al oscilador controlado por voltaje (VCO) utilizado en telemetría analógica de datos sísmicas. Acepta señales de baja potencia desde un sismómetro y produce una señal subportadora modulada en frecuencia adecuada para enlaces telefónicos o vía radio a un lugar remoto de recolección de datos. La frecuencia de la subportadora y la ganancia pueden ser seleccionadas mediante un interruptor. Tiene la opción de poder operar con dos canales para la observación con ganancia alta y baja. El McVCO fue diseñado con el propósito de mejorar la telemetría analógica de las señales dentro de la Pacific Northwest Seismograph Network (PNSN) (Red Sismográfica del Noroeste del Pacífico). Su desarrollo recibió el respaldo del Programa de Geofísica de la Universidad de Washington y del "Volcano Hazards and Earthquake Hazards programs of the United States Geological Survey (USGS) (Programa de Investigaciones de Riesgos Volcánicos y Programa de Investigaciones de Riesgos Sísmicos de los EEUU). Cientos de instrumentos se han construido e instalado. Además de utilizarlo el PNSN, el McVCO es usado por el Observatorio Vulcanológico de Alaska para monitorear los volcanes aleutianos y por el USGS Volcano Disaster Assistance Program (Programa de Ayuda en las Catástrofes Volcánicas del USGS) para responder a crisis volcánicas en otros países. Este manual cubre el funcionamiento del McVCO, es una referencia técnica para aquellos que necesitan saber con más detalle cómo funciona el McVCO, y cubre una serie de temas que requieren un trato explícito o que derivan del despliegue del instrumento.

  3. [Design of a computer program for the registration of implantable medical device, field safety corrective action and advers events, as a tool for medical device surveillance].

    PubMed

    Márquez-Peiró, Juan Francisco; Gaspar-Carreño, Marisa; Jiménez-Torres, José; Selva-Otaolaurruchi, Juan

    2016-03-01

    Objetivo: Describir las funcionalidades de un programa informático de soporte a la actividad del responsable de vigilancia de productos sanitarios (PS). Analizar su utilidad tras un año de implantación. Método: Las etapas del proceso fueron: descripción de actividades básicas del responsable de vigilancia, definir las funcionalidades y datos a procesar, crear los formularios de registro y opciones de la herramienta SIVIPS, implantación en un hospital privado que gestiona PS, validación del programa y análisis de su utilidad al año. Resultados: Se desarrolló la herramienta SIVIPS en Acces® por farmacéuticos. Se describieron las variables básicas para todas las actividades del responsable de vigilancia de PS (registro implantes, registro de alertas, registro de incidentes con PS, incluidos los de diagnóstico in vitro) y las funcionalidades del programa. Al año de su implantación se encontraron registros de 564 implantes con la posibilidad de desglose por tipo de implante, 31 alertas con PS y 6 incidentes con PS, permitiendo el seguimiento de las actuaciones realizadas en estos casos. Conclusiones: SIVIPS® es la primera herramienta de soporte a la actividad del responsable de vigilancia de PS. Es una herramienta sencilla que permite de forma ágil el registro de alertas e incidentes con PS, así como el registro de los implantes realizados en el centro, consiguiendo mejorar la trazabilidad del PS.

  4. Preguntas y respuestas acerca del Estudio del

    Cancer.gov

    El Estudio del Tamoxifeno y Raloxifeno (STAR, por sus siglas en ingls) es un estudio clnico (un estudio de investigacin conducido con voluntarios) diseado para ver cómo el medicamento raloxifeno (Evista) se compara con el medicamento tamoxifeno (Nolvadex)

  5. Cosmogenic Radionuclides in the Campo Del Cielo Iron Meteorite

    NASA Technical Reports Server (NTRS)

    Liberman, R. G.; FernandezNiello, J. O.; Reedy, R. C.; Fifield, L. K.; diTada, M. L.

    2001-01-01

    Cosmogenic Be-10, Al-26, Cl-36, Ca-41, and Ni-59 were measured in the Campo del Cielo iron meteorite. Our results led us to conclude that the pre-atmospheric radius might have been approximately 2 m. Comparisons with other big bodies are also presented. Additional information is contained in the original extended abstract.

  6. Resultados del relevamiento de HI en el Cielo Austral: 3. Relevamiento de Nubes de Alta Velocidad

    NASA Astrophysics Data System (ADS)

    Morras, R.; Bajaja, E.; Arnal, E. M.; Pöppel, W. G. L.

    Los resultados del relevamiento de HI del Hemisferio Austral fueron reprocesados con el fin de incrementar su sensibilidad. Así, se utilizó esta nueva base de datos con el fin de obtener un nuevo relevamiento de Nubes de Alta Velocidad en el cielo austral. El ruido r.m.s. alcanzado es de 0.015-0.020 K, con una resolución espectral de 8 km/seg. El cubrimiento espacial del relevamiento mejora en un factor 16 al realizado por Bajaja et al (1985).

  7. [Environmental factors in ALS].

    PubMed

    Juntas-Morales, Raul; Pageot, Nicolas; Corcia, Philippe; Camu, William

    2014-05-01

    ALS is likely to be a disorder of multifactorial origin. Among all the factors that may increase the risk of ALS, environmental ones are being studied for many years, but in the recent years, several advances have pointed to a new interest in their potential involvement in the disease process, especially for the cyanotoxin BMAA. Food containing BMAA has been found on Guam, a well-known focus of ALS/parkinsonism/dementia and high levels of BMAA have been identified into the brain of these patients. The BMAA cyanotoxin is potentially ubiquitous and have also been found into the food of patients who died from ALS both in Europe and USA. BMAA can be wrongly integrated into the protein structure during mRNA traduction, competing with serine. This may induce abnormal protein folding and a subsequent cell death. Heavy metals, such as lead or mercury may be directly toxic for neuronal cells. Several works have suggested an increased risk of ALS in individuals chronically exposed to these metals. Exposure to pesticides has been suggested to be linked to an increased risk of developing ALS. The mechanism of their toxicity is likely to be mediated by paraoxonases. These proteins are in charge of detoxifying the organism from toxins, and particularly organophosphates. To date, there are insufficient scientific data to suggest that exposure to electromagnetic fields may increase the risk of having ALS. We are particularly missing longitudinal cohorts to demonstrate that risk.

  8. Amyotrophic Lateral Sclerosis (ALS)

    MedlinePlus

    ... Pictures of ALS Mutant Proteins Support Two Major Theories About How the Disease is Caused May 2003 ... All NINDS-prepared information is in the public domain and may be freely copied. Credit to the ...

  9. Genetic Testing for ALS

    MedlinePlus

    ... Involved Donate Familial Amyotrophic Lateral Sclerosis (FALS) and Genetic Testing By Deborah Hartzfeld, MS, CGC, Certified Genetic ... guarantee a person will develop symptoms of ALS. Genetic Counseling If there is more than one person ...

  10. All About ALS

    MedlinePlus

    ... External link, please review our exit disclaimer . Subscribe All About ALS Understanding a Devastating Disorder In the ... a coffee pot, or button a shirt. Eventually, all muscles under voluntary control are affected, and people ...

  11. What Is ALS?

    MedlinePlus

    ... scarring or hardening ("sclerosis") in the region. Motor neurons reach from the brain to the spinal cord ... the body. The progressive degeneration of the motor neurons in ALS eventually leads to their demise. When ...

  12. Extensive genetics of ALS

    PubMed Central

    Calvo, Andrea; Mazzini, Letizia; Cantello, Roberto; Mora, Gabriele; Moglia, Cristina; Corrado, Lucia; D'Alfonso, Sandra; Majounie, Elisa; Renton, Alan; Pisano, Fabrizio; Ossola, Irene; Brunetti, Maura; Traynor, Bryan J.; Restagno, Gabriella

    2012-01-01

    Objective: To assess the frequency and clinical characteristics of patients with mutations of major amyotrophic lateral sclerosis (ALS) genes in a prospectively ascertained, population-based epidemiologic series of cases. Methods: The study population includes all ALS cases diagnosed in Piemonte, Italy, from January 2007 to June 2011. Mutations of SOD1, TARDBP, ANG, FUS, OPTN, and C9ORF72 have been assessed. Results: Out of the 475 patients included in the study, 51 (10.7%) carried a mutation of an ALS-related gene (C9ORF72, 32; SOD1, 10; TARDBP, 7; FUS, 1; OPTN, 1; ANG, none). A positive family history for ALS or frontotemporal dementia (FTD) was found in 46 (9.7%) patients. Thirty-one (67.4%) of the 46 familial cases and 20 (4.7%) of the 429 sporadic cases had a genetic mutation. According to logistic regression modeling, besides a positive family history for ALS or FTD, the chance to carry a genetic mutation was related to the presence of comorbid FTD (odds ratio 3.5; p = 0.001), and age at onset ≤54 years (odds ratio 1.79; p = 0.012). Conclusions: We have found that ∼11% of patients with ALS carry a genetic mutation, with C9ORF72 being the commonest genetic alteration. Comorbid FTD or a young age at onset are strong indicators of a possible genetic origin of the disease. PMID:23100398

  13. Physiological profile of fighters influences training organisation in combat sports: response to Del Vecchio, Hirata, and Franchini (2011).

    PubMed

    Paillard, Thierry

    2011-12-01

    The article by Del Vecchio, et al. (2011) provides relevant information to trainers about the effort-pause ratio during mixed martial arts matches. Taking into account the physiological profiles of fighters would increase interest in these findings. PMID:22403925

  14. ALS superbend magnet system

    SciTech Connect

    Zbasnik, J.; Wang, S.T.; Chen, J.Y.; DeVries, G.J.; DeMarco, R.; Fahmie, M.; Geyer, A.; Green, M.A.; Harkins, J.; Henderson, T.; Hinkson, J.; Hoyer, E.H.; Krupnick, J.; Marks, S.; Ottens, F.; Paterson, J.A.; Pipersky, P.; Portmann, G.; Robin, D.A.; Schlueter, R.D.; Steier, C.; Taylor, C.E.; Wahrer, R.

    2000-09-15

    The Lawrence Berkeley National Laboratory is preparing to upgrade the Advanced Light Source (ALS) with three superconducting dipoles (Superbends). In this paper we present the final magnet system design which incorporates R&D test results and addresses the ALS operational concerns of alignment, availability, and economy. The design incorporates conduction-cooled Nb-Ti windings and HTS current leads, epoxy-glass suspension straps, and a Gifford-McMahon cryocooler to supply steady state refrigeration. We also present the current status of fabrication and testing.

  15. Modulus measurements in ordered Co-Al, Fe-Al, and Ni-Al alloys

    NASA Technical Reports Server (NTRS)

    Harmouche, M. R.; Wolfenden, A.

    1985-01-01

    The composition and/or temperature dependence of the dynamic Young's modulus for the ordered B2 Co-Al, Fe-Al, and Ni-Al aluminides has been investigated using the piezoelectric ultrasonic composite oscillator technique (PUCOT). The modulus has been measured in the composition interval 48.49 to 52.58 at. pct Co, 50.87 to 60.2 at. pct Fe, and 49.22 to 55.95 at. pct Ni for Co-Al, Fe-Al, and Ni-Al, respectively. The measured values for Co-Al are in the temperature interval 300 to 1300 K, while those for the other systems are for ambient temperature only. The data points show that Co-Al is stiffer than Fe-Al, which is stiffer than Ni-Al. The data points for Fe-Al and Ni-Al are slightly higher than those reported in the literature.

  16. Al Shanker Remembers.

    ERIC Educational Resources Information Center

    American Educator, 2000

    2000-01-01

    In a 1996 interview shortly before his death, Al Shanker, longtime president of the American Federation of Teachers, discussed such topics as: his own educational experiences; how he learned about political fighting in the Boy Scouts; the appeal of socialism; multinational corporations and the nation state; teaching tough students; and John Dewey…

  17. Fosetyl-al

    Integrated Risk Information System (IRIS)

    Fosetyl - al ; CASRN 39148 - 24 - 8 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Ef

  18. ALS renewal moves forward

    NASA Astrophysics Data System (ADS)

    Falcone, R. W.; Feinberg, B.; Hussain, Z.; Kirz, J.; Krebs, G. F.; Padmore, H. A.; Robin, D. S.; Robinson, A. L.

    2007-11-01

    As the result of an extensive long-term planning process involving all its stakeholders—management, staff, and users—the ALS has seen its future and is aggressively moving ahead to implement its vision for keeping the facility at the cutting edge for the next 2-3 decades. The evolving strategic plan now in place aims to renew the ALS so it can address a new generation of fundamental questions about size dependent and dimensional-confinement phenomena at the nanoscale; correlation and complexity in physical, biological, and environmental systems; and temporal evolution, assembly, dynamics and ultrafast phenomena. The renewal spans three areas: (1) increased staffing at beamlines to support the growing user community and safety professionals to keep an increasingly complex facility hazard free; (2) implementing advances in accelerator, insertion device, beamline, and detector technology that will make it possible for ALS users to address emerging grand scientific and technological challenges with incisive world-class tools; and (3) construction of a user support building and guest housing that will increase the safety and user friendliness of the ALS by providing users office, meeting, experiment staging, and laboratory space for their work and on-site accommodations at reasonable rates.

  19. Estudio del sistema simbiótico AR Pavonis

    NASA Astrophysics Data System (ADS)

    Quiroga, C.; Brandi, E.; Ferrer, O.; García, L.; Barbá, R.

    Se presenta un estudio espectroscópico y polarimétrico de la binaria eclipsante AR Pavonis a partir de observaciones obtenidas con el telescopio de 2.15 m. del CASLEO (San Juan). El estudio de la naturaleza del sistema se realizó a través del análisis de algunos espectros reunidos entre los años 1990 y 1995 y de datos polarimétricos correspondientes al intervalo 1995 y 1997. El análisis espectroscópico indica que AR Pav está compuesta por una gigante roja M3.7 y una componente caliente compacta, con una temperatura mayor a 90000 K y una luminosidad del orden de 500Lsolar. A lo largo del período orbital, las variaciones observadas en flujo y en velocidades radiales, reflejan que las emisiones permitidas se forman en una región que rodea la componente caliente. El estudio de la polarización lineal de AR Pav indica que además de una componente interestelar, existe una componente intrínseca del sistema que varía temporalmente y con la longitud de onda de la luz polarizada. El distinto comportamiento del grado de polarización y del ángulo de posición observado en fases diferentes, sugiere que distintos mecanismos pueden estar actuando, dependiendo de la región de scattering observado a lo largo de la línea de la visual.

  20. The Del Rio ataxite, Texas

    NASA Technical Reports Server (NTRS)

    Henderson, E. P.; King, E. A.

    1977-01-01

    Basic data are presented on the Del Rio, Nordheim, and Monahans ataxites found in Texas. Results are reported for bulk-chemistry analysis, metallographic observations, and electron-microprobe analysis of the Del Rio meteorite. It is shown that Del Rio is distinctly different from the other two ataxites in terms of nickel, phosphorous, and carbon content, and is composed of at least three coarse grains in different crystallographic orientations. All the kamacite in Del Rio is found to have transformation structures that are probable shock products, and minor inclusions of daubreelite, schreibersite, and troilite are observed. It is concluded that Del Rio was apparently mildly shocked prior to its fall.

  1. Ausbildung als zentrale Aufgabe

    NASA Astrophysics Data System (ADS)

    Krämer, Walter; Schmerbach, Sibylle

    Anders als Lesen und Schreiben zählen Grundkenntnisse in Statistik heute noch nicht zu den Voraussetzungen einer sinnvollen Teilhabe am Sozialgeschehen. Und auch in der akademischen Statistik-Ausbildung gibt es noch einiges zu tun. Das vorliegende Kapitel zeichnet die Geschichte dieser akademischen Ausbildung an deutschen Universitäten nach dem zweiten Weltkrieg nach, stellt aktuelle Defizite vor und weist auf mögliche Verbesserungen hin.

  2. Defining the defect in F508 del CFTR: a soluble problem?

    PubMed

    Deber, Charles M; Cheung, Joanne C; Rath, Arianna

    2008-01-01

    Previously reported crystal structures of CFTR F508 del-NBD1 were determined in the presence of solubilizing mutations. In this issue of Chemistry & Biology, Pissarra et al. (2008) show that partial rescue of the trafficking and gating defects of full-length CFTR occurs in vivo upon recapitulation of the solubilizing F494N/Q637R or F428S/F494N/Q637R substitutions in cis with F508 del. PMID:18215767

  3. Nevado del Huila, Columbia

    NASA Technical Reports Server (NTRS)

    2007-01-01

    Nevado del Huila Volcano in Colombia is actually a volcanic chain running north to south, capped by a glacier. With peaks ranging in height from 2,600 to 5,780 meters (8,530 to 18,960 feet), Nevado del Huila is a stratovolcano composed of alternating layers of hardened lava, solidified ash, and volcanic rocks. Its first recorded eruption occurred in the mid-sixteenth century. The long-dormant volcano erupted again in mid-April 2007. A few months before the eruption, the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) on NASA's Terra satellite captured this image of Nevado del Huila, on February 23, 2007. In this image, the bright white area just east of the central summit is ice. Immediately west of the summit are bare rocks, appearing as blue-gray. West of those rocks, white reappears, but this patch of white results from clouds hovering in the nearby valley. In the east, the colors turn to brown (indicating bare rock) and bright green (indicating vegetation). ASTER photographed Nevado del Huila near the end of a long phase of quietude. On April 17, 2007, local authorities recorded seismic activity associated with rock fracturing on the volcano's central summit, according to the ReliefWeb Website. Activity intensified the following day with an eruption and mudflows, forcing thousands of nearby residents to evacuate. As the Associated Press reported, the eruption caused avalanches and floods that wiped away both houses and bridges. It marked the volcano's first recorded eruption since the Spanish colonized the area five centuries earlier. NASA image created by Jesse Allen, using data provided courtesy of the NASA/GSFC/MITI/ERSDAC/JAROS, and U.S./Japan ASTER Science Team.

  4. AL Amyloidosis and Agent Orange

    MedlinePlus

    ... for survivors' benefits . Research on AL amyloidosis and herbicides The Health and Medicine Division (formally known as ... to the compounds of interest found in the herbicide Agent Orange and AL amyloidosis." VA made a ...

  5. Modeling neuronal vulnerability in ALS.

    PubMed

    Roselli, Francesco; Caroni, Pico

    2014-08-20

    Using computational models of motor neuron ion fluxes, firing properties, and energy requirements, Le Masson et al. (2014) reveal how local imbalances in energy homeostasis may self-amplify and contribute to neurodegeneration in ALS.

  6. Efecto del Programa de Entrenamiento “Manejo del Dolor” en la Documentación de Enfermería en el Expediente Electrónico

    PubMed Central

    Monsiváis, María Guadalupe Moreno; Guzmán, Ma. Guadalupe Interial; Flores, Paz Francisco Sauceda; Arreola, Leticia Vázquez

    2012-01-01

    Resumen En el presente trabajo se muestra la importancia de entrenar al personal de enfermería para mejorar la documentación en el expediente electrónico. Se eligió el manejo del dolor por ser un área prioritaria; una alta proporción de pacientes en período post operatorio cursa con dolor, por lo tanto, la documentación debe ser útil para la toma de decisiones clínicas. Se implementó un programa de entrenamiento denominado “Manejo del Dolor” dirigido al personal de enfermería. Se utilizó la tecnología de la información como herramienta para fortalecer el conocimiento con base en la revisión sistemática de la literatura; el personal de enfermería participante seleccionó la mejor evidencia; posteriormente se trabajó en la transferencia de este conocimiento a la práctica a través del diseño de un protocolo para el manejo del dolor. Se concluye que el conocimiento del manejo del dolor es fundamental para que enfermería documente con mayor precisión sus intervenciones. PMID:24199106

  7. [Home parenteral nutrition in Spain 2011 and 2012; a report of the home and ambulatory artificial nutrition group NADYA].

    PubMed

    Wanden-Berghe, Carmina; Moreno Villarés, J M; Cuerda Compés, C; Carrero, C; Burgos, R; Gómez Candela, C; Virgili Casas, N; Martínez Faedo, C; Alvarez, J; Sánchez Martos, E A; Matía Martín, P; Zugasti, A; Olveira, G; Luengo, L M; Campos Martín, C; Martín Folgueras, T; Penacho Lázaro, M A; Pereira, J L; Garde Orbaiz, C; Pérez de la Cruz, A; Apezetxea, A; Sánchez-Vilar, O; Gil Martínez, M C; Martínez Costa, C; De Luis, D; Laborda, L; Joaquin Ortiz, C; Suárez Llanos, J P; Leyes García, P; Ponce González, M A

    2014-06-01

    Objetivo: Comunicar los datos del registro de Nutrición Parenteral Domiciliaria (NPD) del grupo de trabajo NADYA-SENPE de los años 2011 y 2012. Material y métodos: Recopilación de los datos del registro “on-line” introducidos por los colaboradores del grupo NADYA responsables del seguimiento de la NPD desde el 1 de enero de 2011 al 31 de diciembre de 2012 dividido por años naturales. Resultados: Año 2010: Se registraron 184 pacientes, procedentes de 29 hospitales, lo que representa una tasa de 3,98 pacientes/millón habitantes/año 2011, con 186 episodios de NPD. Durante el año 2012 se registraron 203 pacientes, procedentes de 29 hospitales, lo que representa una tasa de 4,39 pacientes/millón habitantes/año 2012, con un total de 211 episodios de NPD. Conclusiones: Se observa un aumento progresivo de los pacientes registrados respecto a años anteriores. El principal grupo patológico sigue siendo oncológico ocupando el primer lugar desde 2003. Aunque el registro NADYA es un registro consolidado y ha sido y es fuente imprescindible de información relevante para el conocimiento de los avances de la Nutrición Artificial Domiciliaria en nuestro país, queda un amplio margen para la mejora. En especial lo que hace referencia al registro de pacientes pediátricos y al registro de las complicaciones.

  8. Al Jazirah, Sudan

    NASA Technical Reports Server (NTRS)

    2008-01-01

    Al Jazirah (also Gezira) is one of the 26 states of Sudan. The state lies between the Blue Nile and the White Nile in the east-central region of the country. It is a well populated area suitable for agriculture. The area was at the southern end of Nubia and little is known about its ancient history and only limited archaeological work has been conducted in this area. The region has benefited from the Gezira Scheme, a program to foster cotton farming begun in 1925. At that time the Sennar Dam and numerous irrigation canals were built. Al Jazirah became the Sudan's major agricultural region with more than 2.5 million acres (10,000 km) under cultivation. The initial development project was semi-private, but the government nationalized it in 1950. Cotton production increased in the 1970s but by the 1990s increased wheat production has supplanted a third of the land formerly seeded with cotton.

    The image was acquired December 25, 2006, covers an area of 56 x 36.4 km, and is located near 14.5 degrees north latitude, 33.1 degrees east longitude.

    The U.S. science team is located at NASA's Jet Propulsion Laboratory, Pasadena, Calif. The Terra mission is part of NASA's Science Mission Directorate.

  9. Atlas del Genoma del Cáncer: Antecedentes

    Cancer.gov

    El Atlas del Genoma del Cáncer es una iniciativa de los Institutos Nacionales de la Salud (NIH) para crear mapas multidimensionales completos de los cambios genómicos clave en los tipos y subtipos principales de cáncer.

  10. Reproduccion del ganado

    Technology Transfer Automated Retrieval System (TEKTRAN)

    La determination de prenez es una de las principales herramientas de manejo en el Ganado de came. Le habilidad de determiner prenez proporciona al productor un medio de tomar sus decsiones de seleccion y descartarte en momentos decisivos, enfocando los recursos de la operacion en reporductores confi...

  11. ALS Performance Summary - Update

    SciTech Connect

    Waters, A M; Brown, W D; Martz, Jr., H E

    2004-09-30

    High Energy Density Physics (HEDP) experiments play an important role in corroborating the improved physics codes that underlie LLNL's Stockpile Stewardship mission. Conducting these experiments, whether on the National Ignition Facility (NIF) or another national facility such as Omega, will require not only improvement in the diagnostics for measuring the experiment, but also detailed knowledge of the as-built target components and assemblies themselves. To assist in this effort, a defined set of well-known reference standards designed to represent a range of HEDP targets have been built and are being used to quantify the performance of different characterization techniques [Hibbard, et al. 2004]. Without the critical step of using reference standards for qualifying characterization tools there can be no verification of either commercial or internally-developed characterization techniques and thus an uncertainty in the input to the physics code models would exist.

  12. Determinacion de Caracteristicas Opticas del Telescopio OAN150

    NASA Astrophysics Data System (ADS)

    Galan, M. J.; Cobos, F. J.

    1987-05-01

    En el Observatorio de Calar Alto, en Almería, España, está ubicado un telescopio de 15O-cms de diámetro -construído por REOSC- perteneciente al Observatorio Astronómico Nacional, con sede en Madrid, España. La infraestructura técnica del OAN ha sido tradicionalmente débil y actualmente se está haciendo un esfuerzo por fortalecerla. Existe una información muy limitada del telescopio en general; de su óptica en particular se conocían los valores de los parámetros principales pero sin saber si éstos corresponden a valores teóricos ó de construcción. Por ello se consideró necesario iniciar una investigación para conocer en detalle los valores reales de las componentes ópticas del telescopio, obteniéndose algunos resultados de interés. El primario del telescopio OANl5O es aproximadamente F/3 y el siste ma en su conjunto es F/8.2, con su sistema corrector de campo. En términos generales, la imagen es satisfactoria en todo el campo y, sin sistema corrector, la imagen axial también es buena. En un futuro muy cercano se piensa diseñar instrumentación adicional para este telescopio. Conocer con mayor precisión sus características puede ser de gran utilidad para tal fin, pues se efectúan los cálculos considerando conjuntamente al telescopio y al instrumento.

  13. Theoretical studies of AlF, AlCl, and AlBr

    NASA Technical Reports Server (NTRS)

    Langhoff, Stephen R.; Bauschlicher, Charles W., Jr.; Taylor, Peter R.

    1988-01-01

    Spectroscopic constants have been obtained for the lowest six singlet and lowest five triplet states of AlF and AlCl. The results suggest that the correct ordering of the triplet manifold in these molecules is: a 3Pi, b 3Sigma(+), c 3Sigma(+), d 3Pi, and e 3Delta. Radiative lifetimes have been determined for the excited states, and the A 1Pi to X 1Sigma(+) transition in AlF, AlCl, and AlBr has been examined in detail. A-X transition moment functions, Einstein coefficients, and A 1Pi vibrational lifetimes have been obtained for AlF and AlCl.

  14. Los plaguicidas y la contaminacion del medio ambiente Venezolano

    USGS Publications Warehouse

    Stickel, L.F.; Stickel, W.H.

    1972-01-01

    RESUMEN DE RECOMENDACIONES Recomendaciones para el Programa de Investigacion: 1. Establecer un sistema de muestreo biologico para detectar los niveles tendencias de los productos quimicos toxicos en un peque?o numero de si tios representativos. 2. Mantener continua vigilancia de la contaminacion ambiental, mediante la seleccion acertadamente dirigida de las zonas afectadas y de las fuentes de contaminacion. 3. Realizar estudios acerca de las poblaciones de animales silvestres, y del exito de los procesos reproductivos de las especies o grupos clayes de animales que se consideran mas gravemente afectados. 4. Preparar recomendaciones para una accion gubernamental de proteccion al hombre, a la fauna silvestre y al medio ambiente. Recomendaciones para la Accion Administrativa: 1. Establecer limites a la tolerancia de los residuos de plaguicidas en los alimentos. Constituye una medida clave para disminuir la contaminacion ambiental. 2. Establecer normas de calidad del agua para las corrientes, represas, la gos y otros cuerpos. Es la segunda medida clave para reducir la contaminacion del ambiente 3. Exigir un tratamiento adecuado de los efluentes industriales, especialmente antes de que se construyan las nuevas plantas. 4. Exigir a los agricultores que en el uso de plaguicidas sigan los consejos tecnicos autorizados y negar a los vendedores el derecho a recomendar productos por su cuenta. 5. Tomar medidas para recoger y eliminar los recipientes y sobrantes de los plaguicidas.

  15. Yeast DEL assay detects clastogens.

    PubMed

    Kirpnick, Zhanna; Homiski, Michael; Rubitski, Elizabeth; Repnevskaya, Marina; Howlett, Niall; Aubrecht, Jiri; Schiestl, Robert H

    2005-04-01

    Chromosomal rearrangements, including DNA deletions are involved in carcinogenesis. The deletion (DEL) assay scoring for DNA deletions in the yeast Saccharomyces cerevisiae is able to detect a wide range of carcinogens. Among approximately 60 compounds of known carcinogenic activity, the DEL assay detected 86% correctly whereas the Ames Salmonella assay detected only 30% correctly [R.J. Brennan, R.H. Schiestl, Detecting carcinogens with the yeast DEL assay, Methods Mol. Biol. 262 (2004) 111-124]. Since the DEL assay is highly inducible by DNA double strand breaks, this study examined the utility of the DEL assay for detecting clastogens. Ten model compounds, with varied mechanisms of genotoxicity, were examined for their effect on the frequency of DNA deletions with the DEL assay. The compounds tested were: actinomycin D, camptothecin, methotrexate and 5-fluorodeoxyuridine, which are anticancer agents, noscapine and furosemide are therapeutics, acridine, methyl acrylate and resorcinol are industrial chemicals and diazinon is an insecticide. The in vitro micronucleus assay (IVMN) in CHO cells, a commonly used tool for detection of clastogens, was performed on the same compounds and the results of the two assays were compared. The results of our study show that there is 70% concordance in the presence of metabolic activation (rat liver S9) and 80% concordance in the absence of metabolic activation between the DEL assay and the standard in vitro micronucleus assay. The lack of cytotoxicity observed for four of the ten compounds examined indicates limited diffusion of lipophilic compounds across the yeast cell wall. Thus, the development of a more permeable yeast tester strain is expected to greatly improve concordance of the DEL assay with the IVMN assay. The yeast DEL assay is inexpensive, amenable to automation and requires less expertise to perform than the IVMN. Thus, it has a strong potential as a robust, fast and economical screen for detecting clastogens in

  16. Informe del NCI y los CDC sobre el tabaco sin humo

    Cancer.gov

    El primer informe sobre el consumo mundial del tabaco sin humo y sus consecuencias en la salud pública reveló que más de 300 millones de personas en al menos 70 países usan estos productos dañinos.

  17. Alexandria (Al Iskandariya), Egypt

    NASA Technical Reports Server (NTRS)

    2002-01-01

    This image of Alexandria was taken by astronauts on board the International Space Station in December 2000 using an Electronic Still Camera. A wider-angle view (STS088-739-90) taken from the Space Shuttle in December 1998 is available for context. Alexandria (Al Iskandariya) occupies a T-shaped peninsula and strip of land separating the Mediterranean from Lake Mariout. Originally the town was built upon a mole (stone breakwater) called Heptastadium, which joined the island of Pharos (see referenced website, below) to the mainland. Since then sedimentary deposits have widened the mole. Since 1905, when the 370,000 Alexandrians lived in an area of about 4 sq km between the two harbors, the city (population 4 million; see referenced website, below) has grown beyond its medieval walls and now occupies an area of about 300 sq km. The Mahmudiya Canal, connecting Alexandria with the Nile, runs to the south of the city and, by a series of locks, enters the harbor of the principal port of Egypt (note ships). The reddish and ochre polygons west of Lake Mariout are salt-evaporation, chemical-storage, and water-treatment ponds within the coastal lagoon. Reference Youssef Halim and Fatma Abou Shouk, 2000, Human impacts on Alexandria's marine environment: UNESCO, Coastal Regions and Small Islands Unit (CSI), Coastal Management Sourcebooks 2 (accessed December 20, 2000) Additional photographs taken by astronauts can be viewed at NASA-JSC's Gateway to Astronaut Photography of Earth. Image ISS001-ESC-5025 provided by the Earth Sciences and Image Analysis Laboratory, Johnson Space Center.

  18. al-Sufi, Abu al-Rahman (903-86)

    NASA Astrophysics Data System (ADS)

    Murdin, P.

    2000-11-01

    Persian astronomer, published works on astronomical instruments. Revised PTOLEMY's star catalog as the Book of the Constellations of the Fixed Stars, with improved magnitudes, stars named by reference to constellation figures (much copied, for example by ALFONSO X as Libros del Saber de Astronomìa), and nebulae, including the Andromeda Galaxy (M31). However, the work was not entirely original sin...

  19. Thermal Modeling of Al-Al and Al-Steel Friction Stir Spot Welding

    NASA Astrophysics Data System (ADS)

    Jedrasiak, P.; Shercliff, H. R.; Reilly, A.; McShane, G. J.; Chen, Y. C.; Wang, L.; Robson, J.; Prangnell, P.

    2016-07-01

    This paper presents a finite element thermal model for similar and dissimilar alloy friction stir spot welding (FSSW). The model is calibrated and validated using instrumented lap joints in Al-Al and Al-Fe automotive sheet alloys. The model successfully predicts the thermal histories for a range of process conditions. The resulting temperature histories are used to predict the growth of intermetallic phases at the interface in Al-Fe welds. Temperature predictions were used to study the evolution of hardness of a precipitation-hardened aluminum alloy during post-weld aging after FSSW.

  20. Thermal Modeling of Al-Al and Al-Steel Friction Stir Spot Welding

    NASA Astrophysics Data System (ADS)

    Jedrasiak, P.; Shercliff, H. R.; Reilly, A.; McShane, G. J.; Chen, Y. C.; Wang, L.; Robson, J.; Prangnell, P.

    2016-09-01

    This paper presents a finite element thermal model for similar and dissimilar alloy friction stir spot welding (FSSW). The model is calibrated and validated using instrumented lap joints in Al-Al and Al-Fe automotive sheet alloys. The model successfully predicts the thermal histories for a range of process conditions. The resulting temperature histories are used to predict the growth of intermetallic phases at the interface in Al-Fe welds. Temperature predictions were used to study the evolution of hardness of a precipitation-hardened aluminum alloy during post-weld aging after FSSW.

  1. Philosophieren als Unterrichtsprinzip im Mathematikunterricht

    NASA Astrophysics Data System (ADS)

    Meerwaldt, Diana

    Philosophieren und Mathematik scheinen zunächst gegensätzliche Bereiche zu sein, die sich kaum vereinbaren lassen. Dies trifft für eine Auffassung zu, die Philosophieren als "Gerede" disqualifiziert und Mathematik als eine reine "Formelwissenschaft" begreift. Beide Auffassungen werden den Gegenständen nicht gerecht.

  2. Case Study: del Amo Bioventing

    EPA Science Inventory

    The attached presentation discusses the fundamentals of bioventing in the vadose zone. The basics of bioventing are presented. The experience to date with the del Amo Superfund Site is presented as a case study.

  3. The Advanced Launch System (ALS)

    NASA Astrophysics Data System (ADS)

    Eldred, Charles H.

    The Advanced Launch System (ALS) is an unmanned vehicle that will achieve low hardware cost by using a reusable booster stage which flies back to the launch site, and a core stage in which the rocket engines and redundant avionics are in a module that is returned to earth and recovered for reuse. The booster's utilization of liquid propellant instead of solid propellant will help lower the consumable costs. The ALS also includes launch processing and flight control facilities, necessary support equipment, and ground- and flight-operations infrastructure. The ALS program studies show that, through the ALS, the United States can launch a major Mars initiative economically and with confidence. It is estimated that the objective ALS can be operational in the late 1990s.

  4. Violación del Principio de Equivalencia en Teorías con Dilatón de Cuerdas

    NASA Astrophysics Data System (ADS)

    Landau, S. J.; Sisterna, P. D.; Vucetich, H.

    Se estudian las violaciones al Principio de Equivalencia en Teorías con Dilatón de Cuerdas. En estos modelos, algunas de las constantes fundamentales dependen del espacio y del tiempo. Se muestra que los experimentos de caída libre no tienen aún precisión como para poner límites a los parámetros de la teoría.

  5. Quantum dots formed in InSb/AlAs and AlSb/AlAs heterostructures

    NASA Astrophysics Data System (ADS)

    Abramkin, D. S.; Rumynin, K. M.; Bakarov, A. K.; Kolotovkina, D. A.; Gutakovskii, A. K.; Shamirzaev, T. S.

    2016-06-01

    The crystal structure of new self-assembled InSb/AlAs and AlSb/AlAs quantum dots grown by molecularbeam epitaxy has been investigated by transmission electron microscopy. The theoretical calculations of the energy spectrum of the quantum dots have been supplemented by the experimental data on the steady-state and time-resolved photoluminescence spectroscopy. Deposition of 1.5 ML of InSb or AlSb on the AlAs surface carried out in the regime of atomic-layer epitaxy leads to the formation of pseudomorphically strained quantum dots composed of InAlSbAs and AlSbAs alloys, respectively. The quantum dots can have the type-I and type-II energy spectra depending on the composition of the alloy. The ground hole state in the quantum dot belongs to the heavy-hole band and the localization energy of holes is much higher than that of electrons. The ground electron state in the type-I quantum dots belongs to the indirect X XY valley of the conduction band of the alloy. The ground electron state in the type-II quantum dots belongs to the indirect X valley of the conduction band of the AlAs matrix.

  6. Medical application of 26Al

    NASA Astrophysics Data System (ADS)

    Steinhausen, C.; Gerisch, P.; Heisinger, B.; Hohl, Ch.; Kislinger, G.; Korschinek, G.; Niedermayer, M.; Nolte, E.; Dumitru, M.; Alvarez-Brückmann, M.; Schneider, M.; Ittel, T. H.

    1996-06-01

    Accelerator mass spectrometry (AMS) measurements with 26Al as tracer were performed in order to study the aluminium metabolism and anomalies in the human body and in rats. In particular, the differences between healthy volunteers and patients with renal failure were investigated. The obtained data points of 26Al in blood and urine were described by an open compartment model with three peripheral compartments. It was found that the minimum of peripheral compartments needed to describe 26Al concentrations in blood and urine over a time period of three years is at least three.

  7. In memory of Al Cameron

    NASA Astrophysics Data System (ADS)

    Cowan, John; Truran, James W.

    Al Cameron, who died recently (October 3, 2005) at 80, was one of the giants in astrophysics. His insights were profound and his interests were wide-ranging. Originally trained as a nuclear physicist, he made major contributions in a number of fields, including nuclear reactions in stars, nucleosynthesis, the abundances of the elements in the Solar System, and the origin of the Solar System and the Moon. In 1957, Cameron and, independently, Burbidge, Burbidge, Fowler and Hoyle, wrote seminal papers on nuclear astrophysics. Most of our current ideas concerning ele- ment formation in stars have followed from those two pioneering and historical works. Al also made many contributions in the field of Solar System physics. Particularly noteworthy in this regard was Cameron's work on the formation of the Moon. Al was also a good friend and mentor of young people. Al Cameron will be missed by many in the community both for his scientific contributions and for his friendship.

  8. Seminario Tecnico Regional Sobre Alternativas de Educacion Basica de Adultos en el Marco de la REDALF del Proyecto Principal de Educacion en America Latina y el Caribe (Colonia Tovar, Venezuela, 29 de Septiembre al 3 de Octubre, 1986). Documento Final. (Regional Seminar on Alternatives for Basic Adult Education in the REDALF Project for Education in Latin America and the Caribbean (Colonia Tovar, Venezuela, September 29-October 3, 1986). Final Document.)

    ERIC Educational Resources Information Center

    United Nations Educational, Scientific, and Cultural Organization, Santiago (Chile). Regional Office for Education in Latin America and the Caribbean.

    The final report of a conference concerning adult basic education de Adultos en el Marco de la REDALF del related to innovative projects in adult education in nine countries. A wide spectrum of issues related to adult basic education, curriculum, methodology, evaluation, and research are analyzed in the context of educational planning. Among the…

  9. El libro del Relogio del Palacio de las Horas

    NASA Astrophysics Data System (ADS)

    Morales, J. D.

    2009-08-01

    This paper resume the investigation entitled ``El libro del Relogio del Palacio de las Horas''. That consist in an edition of the original text of the book of the Clock of the Palace of the Hours from the Books of the knowledge of Astronomy of Alfonso X (Manuscript 156, Complutense University). And a description of the astronomical functionality of the Clock of the Palace of the Hours. It includes a geometric description of the positional astronomy on which the operation of the Palace is based.

  10. Comparing the Thermodynamic Behaviour of Al(1)+ZrO2(s) to Al(1)+Al2O3(s)

    NASA Technical Reports Server (NTRS)

    Copland, Evan

    2004-01-01

    In an effort to better determine the thermodynamic properties of Al(g) and Al2O(g). the vapor in equilibrium with Al(l)+ZrO2(s) was compared to the vapor in equilibrium with Al(l)+Al2O3(s) over temperature range 1197-to-1509K. The comparison was made directly by Knudsen effusion-cell mass spectrometry with an instrument configured for a multiple effusion-cell vapor source (multi-cell KEMS). Second law enthalpies of vaporization of Al(g) and Al2O(g) together with activity measurements show that Al(l)+ZrO2(s) is thermodynamically equivalent to Al(l)+Al2O3(s), indicating Al(l) remained pure and Al2O3(s) was present in the ZrO2-cell. Subsequent observation of the Al(l)/ZrO2 and vapor/ZrO2 interfaces revealed a thin Al2O3-layer had formed, separating the ZrO2-cell from Al(l) and Al(g)+Al2O(g), effectively transforming it into an Al2O3 effusion-cell. This behavior agrees with recent observations made for Beta-NiAl(Pt) alloys measured in ZrO2 effusion-cell.

  11. [Guideline for the assessment of clinical research proposals. Comisión Nacional de Investigación Científica del Instituto Mexicano del Seguro Social].

    PubMed

    Mejía-Aranguré, Juan Manuel; Grijalva-Otero, Israel; Majluf-Cruz, Abraham; Cruz-López, Miguel; Núñez-Enríquez, Juan Carlos; Salamanca-Gómez, Fabio Abdiel

    2013-01-01

    Antecedentes: la investigación médica es una herramienta fundamental para lograr el avance de la ciencia al mejorar las acciones encaminadas a proteger, promover y restaurar la salud del individuo y de la sociedad en general. Las tres características imprescindibles para que un protocolo de investigación sea autorizado son: relevancia científica, calidad técnica y el cumplimiento de los aspectos éticos. Material y métodos: estudio retrospectivo efectuado con base en la búsqueda específica en Pubmed, Medline, Ovid y Google Scholar con los términos: peer review, research proposals, review and protocols and reviewers. Debido a que no se identificó ningún artículo que refiriera específicamente los criterios para evaluar protocolos de investigación clínica, se hizo un consenso entre los vocales de la Comisión Nacional de Investigación Científica del Instituto Mexicano del Seguro Social, que está integrada por investigadores titulares de la institución, todos pertenecientes al Sistema Nacional de Investigadores. Se discutieron los criterios que debieran componer una revisión adecuada y cuáles debieran ser los rubros que deben incluirse en el análisis. Resultados: se integraron los criterios específicos que le permitirán al revisor de un protocolo de investigación realizar una crítica con bases metodológicas aceptadas por un consenso de investigadores. Conclusiones: un revisor debe ser considerado como un promotor del avance del conocimiento científico que, mediante sus comentarios y su dictamen, permite que los investigadores incrementen la calidad de sus protocolos de investigación.

  12. Ab initio modeling of zincblende AlN layer in Al-AlN-TiN multilayers

    NASA Astrophysics Data System (ADS)

    Yadav, S. K.; Wang, J.; Liu, X.-Y.

    2016-06-01

    An unusual growth mechanism of metastable zincblende AlN thin film by diffusion of nitrogen atoms into Al lattice is established. Using first-principles density functional theory, we studied the possibility of thermodynamic stability of AlN as a zincblende phase due to epitaxial strains and interface effect, which fails to explain the formation of zincblende AlN. We then compared the formation energetics of rocksalt and zincblende AlN in fcc Al through direct diffusion of nitrogen atoms to Al octahedral and tetrahedral interstitials. The formation of a zincblende AlN thin film is determined to be a kinetically driven process, not a thermodynamically driven process.

  13. Percepcion de los profesores universitarios acerca del concepto cultura cientifica y de sus implicaciones en el nuevo bachillerato del Recinto de Rio Piedras de la Universidad de Puerto Rico

    NASA Astrophysics Data System (ADS)

    Ramos Pastrana, Nilsa

    El Senado Academico del Recinto de Rio Piedras de la Universidad de Puerto Rico aprobo en el ano academico 2005-2006 la Certificacion 46, que contiene los lineamientos de un nuevo bachillerato. Este nuevo bachillerato introdujo cambios significativos en el curriculo tradicional. Entre ellos se encuentra la reduccion del componente de educacion general y el de Ciencias Biologicas en particular. La reduccion de creditos en el componente de Ciencias Biologicas ha obligado a reevaluar el concepto de cultura cientifica que desarrollan esos cursos. El proposito del estudio consistio en auscultar las percepciones de los profesores de las Facultades de Administracion de Empresas, Humanidades, Ciencias Sociales, Ciencias Naturales, Educacion y Estudios Generales del Recinto de Rio Piedras de la Universidad de Puerto Rico en torno al concepto de cultura cientifica, los contenidos disciplinares del curso de Ciencias Biologicas y la reduccion de creditos en el nuevo bachillerato. Las preguntas que guiaron la investigacion fueron: ¿cuales son las percepciones que tienen los profesores de las Facultades de Administracion de Empresas, Ciencias Sociales, Estudios Generales, Ciencias Naturales, Humanidades y Educacion, en torno al concepto de cultura cientifica y los contenidos disciplinares del curso de Ciencias Biologicas? ¿cuales son las percepciones que tienen los profesores de Ciencias Biologicas en torno al concepto cultura cientifica y los contenidos disciplinares del curso de Ciencias Biologicas? ¿existen diferencias significativas por facultad, genero, experiencia, rango y nombramiento en las percepciones que tienen los profesores del Recinto de Rio Piedras de la Universidad de Puerto Rico sobre los elementos que caracterizan la cultura cientifica y los contenidos biologicos que deben tener los egresados del Recinto? ¿que implicaciones curriculares tienen estos testimonios en el desarrollo del concepto de cultura cientifica en el nuevo bachillerato? Para realizar la

  14. Vacunas contra los virus del papiloma humano

    Cancer.gov

    Una hoja informativa acerca de las vacunas contra los virus del papiloma humano (VPH) para prevenir infecciones con ciertos tipos de VPH, los cuales son la causa principal del cáncer de cuello del útero o cérvix.

  15. El aprendizaje significativo en las ciencias al participar en proyectos de investigacion cientifica

    NASA Astrophysics Data System (ADS)

    Mora Polanco, Miguelena

    La ciencia es el eje fundamental a traves del cual se desarrollan las habilidades necesarias para el pensar cientifico que va a la busqueda del conocimiento cientifico. La intencion de este estudio fue indagar en el tema de investigacion cientifica desde el punto de vista de los participantes en los siguientes aspectos relacionados con la experiencia de investigacion cientifica: a) conceptos, b) proceso, c) destrezas y d) disposicion. Tambien se analizaron: a) las perspectivas del metodo cientifico, b) la estrategia de ensenanza, c) la cultura cientifica y d) la exposicion del proyecto investigativo en la Feria Cientifica; como parte del aprendizaje significativo de la ciencias de los participantes. Esta investigacion cualitativa propuso como diseno el estudio de caso. Los aspectos relacionados a la experiencia de participar en proyecto de investigacion cientifica son el fenomeno o caso bajo estudio. En el estudio participaron cinco (5) estudiantes egresados de escuela publica o privada que cursaban hasta el tercer ano de estudios universitarios, conducentes a un bachillerato en educacion secundaria en ciencias o en ciencias naturales. Las tecnicas utilizadas para recopilar los datos fueron: analisis de documentos del DEPR, revision de artefactos y entrevistas profundas. Para el analisis de los datos de las entrevistas se utilizo el modelo de Wolcott (1994). Del analisis de documentos del DEPR se identificaron areas a mejorar en las guias de las cartas circulares con relacion a la investigacion escolar y la feria cientifica. El analisis de los artefactos proveyo evidencia de como los internados, simposios e investigaciones fomentan el que los estudiantes se superen en el aspecto cognitivo, se conviertan en creadores del conocimiento, al hacer suyo los conceptos para poder explicarlos al publico. De las entrevistas los participantes manifestaron que la experiencia de investigacion fue una de aprendizaje significativo que los marco para toda la vida y les expandio su

  16. El uso de la neuromodulación para el tratamiento del temblor

    PubMed Central

    Bendersky, Damián; Ajler, Pablo; Yampolsky, Claudio

    2014-01-01

    Introducción: El temblor puede ser un desorden incapacitante y el tratamiento de primera línea para estos pacientes es farmacológico. Sin embargo, este tratamiento puede llevar a una reducción satisfactoria del temblor en sólo el 50% de los pacientes con temblor esencial. La talamotomía era el tratamiento de elección para el temblor refractario al tratamiento médico hasta que comenzó a utilizarse la estimulación cerebral profunda (ECP) del núcleo ventral intermedio (Vim) del tálamo. En la actualidad, raramente se realiza la talamotomía. Métodos: Este artículo es una revisión no sistemática de las indicaciones, resultados, parámetros de programación y técnica quirúrgica de la ECP del Vim para el tratamiento del temblor. Resultados: Aunque los resultados clínicos son similares usando la talamotomía o la ECP del Vim, la primera causa más efectos adversos que la última. Además, la ECP puede ser usada bilateralmente, mientras que la talamotomía tiene un alto riesgo de causar disartria cuando se realiza de ambos lados. La ECP del Vim logró una adecuada mejoría del temblor en varias series de pacientes con temblor causado por temblor esencial, enfermedad de Parkinson o esclerosis múltiple. Además del Vim, hay otros blancos que están siendo usados por varios autores, tales como la zona incerta y las radiaciones prelemniscales. Conclusión: La ECP del Vim es un tratamiento útil para el temblor incapacitante refractario al tratamiento médico. Es esencial realizar una precisa selección de pacientes, así como utilizar una técnica quirúrgica correcta. Aún se desconoce el mejor blanco estereotáctico para el temblor, aunque el Vim es el más usado. PMID:25165613

  17. Andalusian astronomy: al-Zij al-Muqtabis of Ibn al-Kammâd.

    NASA Astrophysics Data System (ADS)

    Chabás, J.; Goldstein, B. R.

    1994-12-01

    In the twelfth century the Arabic astronomer Ibn al-Kammâd, living in Islamic Spain, composed three sets of astronomical tables, called "zijes". The zijes were largely based on the work of predecessors, going back to Ptolemy on the one hand, and Hindu astronomers on the other. None of his zijes survived in the original Arabic, but a Latin manuscript contains a translation of an apparently complete zij, the "al-Zij al-Muqtabis". This paper examines the body of astronomical knowledge contained in this zij. Specifically, it is shown that one can gain valuable information on the solar theory of the Islamic astronomers from this translation. Furthermore, the theory of lunar and solar eclipses in the work is analyzed, and tables of mean planetary and solar motions are discussed. In addition, tables for the motion of the vernal equinox, star tables, and several topics of Islamic spherical astronomy are examined.

  18. Microstructure Evolution and Mechanical Properties of Al/Al-Mg/Al composite sheet metals

    NASA Astrophysics Data System (ADS)

    Cho, Jaehyung; Kim, Su-Hyeon; Kim, Hyoung-Wook; Lim, Cha-Yong; Kim, Eun-Young; Choi, Shi-Hoon

    2011-08-01

    Two different types of aluminum alloys of AA1050 and AA5182 were used to manufacture Al/Al-Mg/Al composite sheet metals by roll bonding technology at room temperature. The composite sheet metals were annealed at 400 °C and carried out uniaxial tension tests to investigate mechanical properties. Macroscopic mechanical properties are strongly dependent on the volume (or thickness) fraction of two component layers. Microstructure and texture evolution were also investigated during roll bonding process. The AA1050 sheets located in the outer layer mainly consist of shear texture components and the AA5182 sheet located in the center layer consists of plane strain texture components. With differential speeds of the top and bottom rolls, roll bonding was also carried out. Elongation along the RD and TD was improved at a speed difference of approximately 10%-20%.

  19. Dynamic Modeling of ALS Systems

    NASA Technical Reports Server (NTRS)

    Jones, Harry

    2002-01-01

    The purpose of dynamic modeling and simulation of Advanced Life Support (ALS) systems is to help design them. Static steady state systems analysis provides basic information and is necessary to guide dynamic modeling, but static analysis is not sufficient to design and compare systems. ALS systems must respond to external input variations and internal off-nominal behavior. Buffer sizing, resupply scheduling, failure response, and control system design are aspects of dynamic system design. We develop two dynamic mass flow models and use them in simulations to evaluate systems issues, optimize designs, and make system design trades. One model is of nitrogen leakage in the space station, the other is of a waste processor failure in a regenerative life support system. Most systems analyses are concerned with optimizing the cost/benefit of a system at its nominal steady-state operating point. ALS analysis must go beyond the static steady state to include dynamic system design. All life support systems exhibit behavior that varies over time. ALS systems must respond to equipment operating cycles, repair schedules, and occasional off-nominal behavior or malfunctions. Biological components, such as bioreactors, composters, and food plant growth chambers, usually have operating cycles or other complex time behavior. Buffer sizes, material stocks, and resupply rates determine dynamic system behavior and directly affect system mass and cost. Dynamic simulation is needed to avoid the extremes of costly over-design of buffers and material reserves or system failure due to insufficient buffers and lack of stored material.

  20. La meridiana di Egnazio Danti nella Torre dei Venti in Vaticano: un'icona della riforma Gregoriana del calendario

    NASA Astrophysics Data System (ADS)

    Sigismondi, Costantino

    2014-05-01

    La Torre dei Venti domina l’angolo Sud Ovest del cortile della Pigna (nell'area dei Musei Vaticani), ed è inclusa negli ambienti dell'Archivio Segreto Vaticano. Non è aperta al pubblico, ma è universalmente nota per la fama che da oltre quattrocento anni la circonda, legata alle vicende della riforma Gregoriana del calendario. La meridiana tracciata da padre Egnazio Danti (1536-1586) nella torre dei Venti, fu visitata anche da Gregorio XIII, probabilmente il 21 marzo 1581 come suppone il padre Stein, per convincersi dell'anticipo ormai arrivato a dieci giorni dell'equinozio di primavera sulla data che il concilio di Nicea aveva fissato al 21 marzo per il computo pasquale. La ricognizione astrometrica del febbraio-marzo 2009 fatta dall'autore viene qui presentata.

  1. Response to Pagano et al.

    PubMed

    Rezende, Flávia; Löwe, Oliver; Helfinger, Valeska; Prior, Kim-Kristin; Walter, Maria; Zukunft, Sven; Fleming, Ingrid; Weissmann, Norbert; Brandes, Ralf P; Schröder, Katrin

    2015-11-20

    In their letter, Pagano et al. appreciate the development of the Nox1, Nox2, and Nox4 triple (3N(-/-)) knockout mouse. They also agree on the view that chemiluminescence assays in general have severe limitations. However, they criticize the fact that the membrane assays in the particular study were restricted to chemiluminescence techniques. Moreover, Pagano et al. got the impression that statements concerning membrane assays of Nox activity in general were made. In addition to a lack of some technical details, Pagano et al. also found the characterization of the 3N(-/-) incomplete and some of the results to be incomprehensible. Although we are grateful for the interest of Pagano et al. in our work, we realized that basically each observation of our study was questioned. This is certainly an excessive rejection of the study in total and fails to appreciate the clear chain of evidences presented. Our work focused on chemiluminescence, and thus, any conclusions are restricted to this technique. Moreover, the 3N(-/-) mice were never developed to study the physiology of Nox enzymes, but rather to validate Nox specificity of NADPH-stimulated chemiluminescence assays. We are convinced that our findings are a valid demonstration that chemiluminescence-based assays in membrane preparations stimulated with NADPH do not measure Nox activity. This conclusion is based on both overexpression studies as well as genetic deficient mouse models. The criticisms of Pagano et al. thus might be justified in some aspects; they, however, cannot disprove the conclusions of our work. Antioxid. Redox Signal. 23, 1247-1249.

  2. Response to Pagano et al.

    PubMed

    Rezende, Flávia; Löwe, Oliver; Helfinger, Valeska; Prior, Kim-Kristin; Walter, Maria; Zukunft, Sven; Fleming, Ingrid; Weissmann, Norbert; Brandes, Ralf P; Schröder, Katrin

    2015-11-20

    In their letter, Pagano et al. appreciate the development of the Nox1, Nox2, and Nox4 triple (3N(-/-)) knockout mouse. They also agree on the view that chemiluminescence assays in general have severe limitations. However, they criticize the fact that the membrane assays in the particular study were restricted to chemiluminescence techniques. Moreover, Pagano et al. got the impression that statements concerning membrane assays of Nox activity in general were made. In addition to a lack of some technical details, Pagano et al. also found the characterization of the 3N(-/-) incomplete and some of the results to be incomprehensible. Although we are grateful for the interest of Pagano et al. in our work, we realized that basically each observation of our study was questioned. This is certainly an excessive rejection of the study in total and fails to appreciate the clear chain of evidences presented. Our work focused on chemiluminescence, and thus, any conclusions are restricted to this technique. Moreover, the 3N(-/-) mice were never developed to study the physiology of Nox enzymes, but rather to validate Nox specificity of NADPH-stimulated chemiluminescence assays. We are convinced that our findings are a valid demonstration that chemiluminescence-based assays in membrane preparations stimulated with NADPH do not measure Nox activity. This conclusion is based on both overexpression studies as well as genetic deficient mouse models. The criticisms of Pagano et al. thus might be justified in some aspects; they, however, cannot disprove the conclusions of our work. Antioxid. Redox Signal. 23, 1247-1249. PMID:26173053

  3. Large rectification magnetoresistance in nonmagnetic Al/Ge/Al heterojunctions.

    PubMed

    Zhang, Kun; Li, Huan-Huan; Grünberg, Peter; Li, Qiang; Ye, Sheng-Tao; Tian, Yu-Feng; Yan, Shi-Shen; Lin, Zhao-Jun; Kang, Shi-Shou; Chen, Yan-Xue; Liu, Guo-Lei; Mei, Liang-Mo

    2015-09-21

    Magnetoresistance and rectification are two fundamental physical properties of heterojunctions and respectively have wide applications in spintronics devices. Being different from the well known various magnetoresistance effects, here we report a brand new large magnetoresistance that can be regarded as rectification magnetoresistance: the application of a pure small sinusoidal alternating-current to the nonmagnetic Al/Ge Schottky heterojunctions can generate a significant direct-current voltage, and this rectification voltage strongly varies with the external magnetic field. We find that the rectification magnetoresistance in Al/Ge Schottky heterojunctions is as large as 250% at room temperature, which is greatly enhanced as compared with the conventional magnetoresistance of 70%. The findings of rectification magnetoresistance open the way to the new nonmagnetic Ge-based spintronics devices of large rectification magnetoresistance at ambient temperature under the alternating-current due to the simultaneous implementation of the rectification and magnetoresistance in the same devices.

  4. Thermodynamic modeling of Pt-Al and Pd-Al

    NASA Astrophysics Data System (ADS)

    Carr, Derek

    2011-03-01

    Pure platinum and pure palladium are too soft for typical jewelry applications. Adding small amounts of other metals can significantly increase their performance. However, international hallmarking standards require the alloys to be 95% pure by weight. How does one achieve significant improvements in performance adding only small amounts (5 wt-%) of other metals? Significant improvements are possible even with small additions if precipitate hardening can be induced. Using a combination of first-principles, cluster expansion, and Monte Carlo modeling, we have identified new Pt-rich/Pd-rich phases in Pt-Al and Pd-Al that should be useful in precipitate hardening. Thermodynamical modeling indicates that the phases are experimentally feasible (not kinetically inhibited).

  5. Large rectification magnetoresistance in nonmagnetic Al/Ge/Al heterojunctions

    NASA Astrophysics Data System (ADS)

    Zhang, Kun; Li, Huan-Huan; Grünberg, Peter; Li, Qiang; Ye, Sheng-Tao; Tian, Yu-Feng; Yan, Shi-Shen; Lin, Zhao-Jun; Kang, Shi-Shou; Chen, Yan-Xue; Liu, Guo-Lei; Mei, Liang-Mo

    2015-09-01

    Magnetoresistance and rectification are two fundamental physical properties of heterojunctions and respectively have wide applications in spintronics devices. Being different from the well known various magnetoresistance effects, here we report a brand new large magnetoresistance that can be regarded as rectification magnetoresistance: the application of a pure small sinusoidal alternating-current to the nonmagnetic Al/Ge Schottky heterojunctions can generate a significant direct-current voltage, and this rectification voltage strongly varies with the external magnetic field. We find that the rectification magnetoresistance in Al/Ge Schottky heterojunctions is as large as 250% at room temperature, which is greatly enhanced as compared with the conventional magnetoresistance of 70%. The findings of rectification magnetoresistance open the way to the new nonmagnetic Ge-based spintronics devices of large rectification magnetoresistance at ambient temperature under the alternating-current due to the simultaneous implementation of the rectification and magnetoresistance in the same devices.

  6. AlSb/InAs/AlSb quantum wells

    NASA Technical Reports Server (NTRS)

    Kroemer, Herbert

    1990-01-01

    Researchers studied the InAs/AlSb system recently, obtaining 12nm wide quantum wells with room temperature mobilities up to 28,000 cm(exp 2)/V center dot S and low-temperature mobilities up to 325,000 cm(exp 2)/V center dot S, both at high electron sheet concentrations in the 10(exp 12)/cm(exp 2) range (corresponding to volume concentrations in the 10(exp 18)/cm(exp 2) range). These wells were not intentionally doped; the combination of high carrier concentrations and high mobilities suggest that the electrons are due to not-intentional modulation doping by an unknown donor in the AlSb barriers, presumably a stoichiometric defect, like an antisite donor. Inasmuch as not intentionally doped bulk AlSb is semi-insulating, the donor must be a deep one, being ionized only by draining into the even deeper InAs quantum well. The excellent transport properties are confirmed by other observations, like excellent quantum Hall effect data, and the successful use of the quantum wells as superconductive weak links between Nb electrodes, with unprecendentedly high critical current densities. The system is promising for future field effect transistors (FETs), but many processing problems must first be solved. Although the researchers have achieved FETs, the results so far have not been competitive with GaAs FETs.

  7. Identification of Candida albicans ALS2 and ALS4 and Localization of Als Proteins to the Fungal Cell Surface

    PubMed Central

    Hoyer, L. L.; Payne, T. L.; Hecht, J. E.

    1998-01-01

    Additional genes in the growing ALS family of Candida albicans were isolated by PCR screening of a genomic fosmid library with primers designed from the consensus tandem-repeat sequence of ALS1. This procedure yielded fosmids encoding ALS2 and ALS4. ALS2 and ALS4 conformed to the three-domain structure of ALS genes, which consists of a central domain of tandemly repeated copies of a 108-bp motif, an upstream domain of highly conserved sequences, and a domain of divergent sequences 3′ of the tandem repeats. Alignment of five predicted Als protein sequences indicated conservation of N- and C-terminal hydrophobic regions which have the hallmarks of secretory signal sequences and glycosylphosphatidylinositol addition sites, respectively. Heterologous expression of an N-terminal fragment of Als1p in Saccharomyces cerevisiae demonstrated function of the putative signal sequence with cleavage following Ala17. This signal sequence cleavage site was conserved in the four other Als proteins analyzed, suggesting identical processing of each protein. Primary-structure features of the five Als proteins suggested a cell-surface localization, which was confirmed by indirect immunofluorescence with an anti-Als antiserum. Staining was observed on mother yeasts and germ tubes, although the intensity of staining on the mother yeast decreased with elongation of the germ tube. Similar to other ALS genes, ALS2 and ALS4 were differentially regulated. ALS4 expression was correlated with the growth phase of the culture; ALS2 expression was not observed under many different in vitro growth conditions. The data presented here demonstrate that ALS genes encode cell-surface proteins and support the conclusion that the size and number of Als proteins on the C. albicans cell surface vary with strain and growth conditions. PMID:9765564

  8. Mini-mastoidectomía para anastomosis hipogloso-facial con sección parcial del nervio hipogloso

    PubMed Central

    Campero, Álvaro; Ajler, Pablo; Socolovsky, Mariano; Martins, Carolina; Rhoton, Albert

    2012-01-01

    Introducción: La anastomosis hipogloso-facial es la técnica de elección para la reparación de la parálisis facial cuando no se dispone de un cabo proximal sano del nervio facial. La técnica de anastomosis mediante fresado mastoideo y sección parcial del hipogloso minimiza la atrofia lingual sin sacrificar resultados a nivel facial. Método: La porción mastoidea del nervio facial transcurre por la pared anterior de la AM, a un promedio de 18+/-3 mm de profundidad respecto de la pared lateral. Se debe reconocer la cresta supramastoidea, desde la cual se marca una línea vertical paralela al eje mayor de la AM, 1 cm por detrás de la pared posterior del CAE El fresado se comienza desde la línea medio mastoidea hasta la pared posterior del CAE. Una vez encontrado el nervio facial en el tercio medio del canal mastoideo, el mismo es seguido hacia proximal y distal. Resultados: El abordaje descripto permite acceder al nervio facial intratemporal en su porción mastoidea, y efectuar un fresado óseo sin poner en riesgo al nervio o a estructuras vasculares cercanas. Se trata de un procedimiento técnicamente más sencillo que los abordajes amplios habitualmente utilizados al hueso temporal; no obstante su uso debe ser restringido mayormente a la anastomosis hipogloso-facial. Conclusión: Esta es una técnica relativamente sencilla, que puede ser reproducida por cirujanos sin mayor experiencia en el tema, luego de su paso por el laboratorio de anatomía. PMID:23596555

  9. La implantacion del enfoque constructivista en el aula de ciencia: Estudio de caso multiple

    NASA Astrophysics Data System (ADS)

    Arroyo Betancourt, Luz I.

    Esta investigacion estudia la implantacion del enfoque constructivista en tres aulas de ciencia del contexto puertorriqueno. Se auscultaron las practicas educativas que utilizan maestras consideradas constructivistas y la correspondencia de sus practicas educativas con los elementos esenciales de la didactica que proponen los teoricos de los planteamientos constructivistas. Se ausculto, ademas, a que vision del enfoque constructivista responden las expresiones de las maestras acerca de su practica educativa y como compara con su quehacer, a la luz de los elementos esenciales de las visiones constructivistas piagetiana, social y radical. Se utilizo el diseno de estudio descriptivo de caso multiple. El estudio se baso en entrevistas a profundidad, revision de documentos y observacion no participativa a la sala de clases. El contexto fueron tres escuelas publicas de la Region Educativa de San Juan, una elemental, una intermedia y una superior. Los resultados confirmaron que la transicion hacia el enfoque constructivista es un proceso que toma tiempo, dedicacion y la participacion en adiestramientos y readiestramientos acerca del nuevo enfoque. Las maestras coinciden en la mayoria de las practicas educativas que utilizan para implantar el enfoque constructivista de ensenanza y difieren en algunas debido, probablemente, a que han tenido que adaptarlas a los correspondientes niveles de ensenanza: elemental, intermedio y superior. Dos de las maestras planifican por conceptos generadores, mientras que una de ellas planifica siguiendo la guia que recibe del Departamento de Educacion. Difieren ademas, en el enfasis que confieren al inquirir cientifico. Con relacion a la correspondencia entre la vision manifestada por las maestras a la luz de las visiones piagetiana, social y radical, aparentemente, las preguntas del protocolo de entrevistas no lograron evocar la informacion con suficiente profundidad, por lo que la investigadora tuvo que inferir las visiones de las

  10. Al-Anon and recovery.

    PubMed

    Cermak, T L

    1989-01-01

    The history of Al-Anon and its current demographics are reviewed. In order to understand 12-step recovery and psychotherapy for family members of alcoholics, the concept of codependence is defined with a set of diagnostic criteria consistent with the DSM-III-R definition of personality traits and disorders. At the core of codependence are denial and an unrealistic relationship to willpower. The therapeutic implications of considering codependence as a personality disorder are explored, as are the characteristics that make codependence unique among personality disorders: the central role of denial and the existence of a self-help organization to facilitate recovery. The dynamics of working the 12 steps on codependent characteristics are outlined. A synergistic relationship between psychotherapy and the 12 steps is described. Special attention is given the emergence of Al-Anon adult children of alcoholic meetings, and the future of codependence is discussed.

  11. Juvenile ALS with basophilic inclusions is a FUS proteinopathy with FUS mutations(e–Pub ahead of print)

    PubMed Central

    Bäumer, D.; Hilton, D.; Paine, S.M.L.; Turner, M.R.; Lowe, J.; Talbot, K.; Ansorge, O.

    2010-01-01

    Background: Juvenile amyotrophic lateral sclerosis (ALS) with basophilic inclusions is a form of ALS characterized by protein deposits in motor neurons that are morphologically and tinctorially distinct from those of classic sporadic ALS. The nosologic position of this type of ALS in the molecular pathologic and genetic classification of ALS is unknown. Methods: We identified neuropathologically 4 patients with juvenile ALS with basophilic inclusions and tested the hypothesis that specific RNA binding protein pathology may define this type of ALS. Immunohistochemical findings prompted us to sequence the fused in sarcoma (FUS) gene. Results: Motor symptoms began between ages 17 and 22. Disease progression was rapid without dementia. No family history was identified. Basophilic inclusions were strongly positive for FUS protein but negative for TAR DNA binding protein 43 (TDP-43). Granular and compact FUS deposits were identified in glia and neuronal cytoplasm and nuclei. Ultrastructure of aggregates was in keeping with origin from fragmented rough endoplasmic reticulum. Sequencing of all 15 exons of the FUS gene in 3 patients revealed a novel deletion mutation (c.1554_1557delACAG) in 1 individual and the c.1574C>T (P525L) mutation in 2 others. Conclusion: Juvenile ALS with basophilic inclusions is a FUS proteinopathy and should be classified as ALS-FUS. The FUS c.1574C>T (P525L) and c.1554_1557delACAG mutations are associated with this distinct phenotype. The molecular genetic relationship with frontotemporal lobar degeneration with FUS pathology remains to be clarified. GLOSSARY ALS = amyotrophic lateral sclerosis; FTLD = frontotemporal lobar degeneration; FTLD-FUS = frontotemporal lobar degeneration with FUS pathology; NIFID = neuronal intermediate filament inclusion disease. PMID:20668261

  12. Resumenes Analiticos en Education del 0001 al 0230 (Analytic Resumes in Education, from 0001 to 0230).

    ERIC Educational Resources Information Center

    Scott, Patrick B., Ed.

    1991-01-01

    REDUC is a cooperative network of some 23 associated centers in 17 Latin American and Caribbean countries. The REDUC coordinating center is located in Santiago, Chile. REDUC produces a bibliographic database containing analytical summaries (approximately 800 items annually) of the most important research studies and project descriptions in the…

  13. Etologia aplicada al manejo de especies amenazadas: el caso del turon de patas negras (Mustela nigripes)

    USGS Publications Warehouse

    Vargas, A.; Biggins, D.; Miller, B.

    1999-01-01

    de esta especie de un modo más eficaz y rentable. Black-footed ferrets are considered one of the world's most endangered mammals. The last wild population was discovered in 1981 in Meteetsee, Wyoming, and, in 1985 it collapsed due to an epizootic of canine distemper in combination with sylvatic plague. Prior to the extinction of the last remnant population, 18 wild black-footed ferrets were captured to initiate captive propagation efforts. Captive breeding has been successful and, during the last 11 years, more than 2600 black-footed ferrets have been born in captive breeding centers. Since 1991, approximately 870 ferrets have been reintroduced in 5 areas located within the ferret's original geographic distribution, including sites in Wyoming, Montana, South Dakota, and Arizona. Scientific research has been, and continues to be, a critical tool to direct recovery efforts. Studies in applied ethology conducted on captive and reintroduced ferret populations have demonstrated that a naturalistic captive environment, particularly during early developmental periods, enhances the expression of behaviors necessary for survival in nature. Ferrets raised in a naturalistic environment develop better predatory skills, are able to recognize prairie dog burrows as a home and shelter from predators, and are more physically fit. Results from these studies have been adapted into management strategies to help implement a more cost-effective road to black-footed ferret recovery.

  14. Emerging mechanisms of molecular pathology in ALS.

    PubMed

    Peters, Owen M; Ghasemi, Mehdi; Brown, Robert H

    2015-05-01

    Amyotrophic lateral sclerosis (ALS) is a devastating degenerative disease characterized by progressive loss of motor neurons in the motor cortex, brainstem, and spinal cord. Although defined as a motor disorder, ALS can arise concurrently with frontotemporal lobal dementia (FTLD). ALS begins focally but disseminates to cause paralysis and death. About 10% of ALS cases are caused by gene mutations, and more than 40 ALS-associated genes have been identified. While important questions about the biology of this disease remain unanswered, investigations of ALS genes have delineated pathogenic roles for (a) perturbations in protein stability and degradation, (b) altered homeostasis of critical RNA- and DNA-binding proteins, (c) impaired cytoskeleton function, and (d) non-neuronal cells as modifiers of the ALS phenotype. The rapidity of progress in ALS genetics and the subsequent acquisition of insights into the molecular biology of these genes provide grounds for optimism that meaningful therapies for ALS are attainable. PMID:25932674

  15. Synthesis of AlN/Al Polycrystals along with Al Nanoparticles Using Thermal Plasma Route

    SciTech Connect

    Kanhe, Nilesh S.; Nawale, A. B.; Kulkarni, N. V.; Bhoraskar, S. V.; Mathe, V. L.; Das, A. K.

    2011-07-15

    This paper for the first time reports the (200) oriented growth of hexagonal Aluminum nitride crystals during synthesis of aluminum nanoparticles in dc transferred arc thermal plasma reactor by gas phase condensation in nitrogen plasma. The structural and morphological study of as synthesized AlN crystal and aluminium nanoparticles was done by using the x-ray diffraction method, scanning electron microscopy and transmission electron microscopy.

  16. 33 CFR 80.1118 - Marina Del Rey, CA.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false Marina Del Rey, CA. 80.1118... NAVIGATION RULES COLREGS DEMARCATION LINES Pacific Coast § 80.1118 Marina Del Rey, CA. (a) A line drawn from Marina Del Rey Breakwater South Light 1 to Marina Del Rey Light 4. (b) A line drawn from Marina Del...

  17. 33 CFR 80.1118 - Marina Del Rey, CA.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false Marina Del Rey, CA. 80.1118... NAVIGATION RULES COLREGS DEMARCATION LINES Pacific Coast § 80.1118 Marina Del Rey, CA. (a) A line drawn from Marina Del Rey Breakwater South Light 1 to Marina Del Rey Light 4. (b) A line drawn from Marina Del...

  18. 33 CFR 80.1118 - Marina Del Rey, CA.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 1 2012-07-01 2012-07-01 false Marina Del Rey, CA. 80.1118... NAVIGATION RULES COLREGS DEMARCATION LINES Pacific Coast § 80.1118 Marina Del Rey, CA. (a) A line drawn from Marina Del Rey Breakwater South Light 1 to Marina Del Rey Light 4. (b) A line drawn from Marina Del...

  19. 33 CFR 80.1118 - Marina Del Rey, CA.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 1 2014-07-01 2014-07-01 false Marina Del Rey, CA. 80.1118... NAVIGATION RULES COLREGS DEMARCATION LINES Pacific Coast § 80.1118 Marina Del Rey, CA. (a) A line drawn from Marina Del Rey Breakwater South Light 1 to Marina Del Rey Light 4. (b) A line drawn from Marina Del...

  20. Ab initio modeling of zincblende AlN layer in Al-AlN-TiN multilayers

    DOE PAGESBeta

    Yadav, S. K.; Wang, J.; Liu, X. -Y.

    2016-06-13

    An unusual growth mechanism of metastable zincblende AlN thin film by diffusion of nitrogen atoms into Al lattice is established. Using first-principles density functional theory, we studied the possibility of thermodynamic stability of AlN as a zincblende phase due to epitaxial strains and interface effect, which fails to explain the formation of zincblende AlN. We then compared the formation energetics of rocksalt and zincblende AlN in fcc Al through direct diffusion of nitrogen atoms to Al octahedral and tetrahedral interstitials. Furthermore, the formation of a zincblende AlN thin film is determined to be a kinetically driven process, not a thermodynamicallymore » driven process.« less

  1. Tierra del Fuego, Argentina, South America

    NASA Technical Reports Server (NTRS)

    1991-01-01

    The Mitre Peninsula is the easternmost tip of Tierra del Fuego, Argentina, (54.5S, 65.5W). Early winter snow can be seen on this south tip of the Andes Mountains. These same mountains continue underwater to Antarctica. The Strait of Magellan, separating the South American mainland from Tierra del Fuego is off the scene to the north and west, but the Strait of LeMaire, separating Tierra del Fuego from the Isla de los Estados can be seen.

  2. Synthesis of Al-Al2O3 and Al-Aln Nanoparticle Composites Via Electric Explosion of Wires

    NASA Astrophysics Data System (ADS)

    Lerner, M. I.; Lozhkomoev, A. S.; Pervikov, A. V.; Bakina, O. V.

    2016-07-01

    Composite Al-Al2O3 and Al-AlN nanoparticles were synthesized via electric explosion of aluminum wires in an argon-oxygen gas mixture and in nitrogen. The parameters of electric explosion and gas medium affect the size and relative content of nitride and aluminum oxide in the nanoparticles. Processes of forming chemical compounds during aluminum oxidation at the contact surface between explosive products and gas and of nitrogen diffusions into the nanoparticles of the condensed phase are considered.

  3. NiAl-base composite containing high volume fraction of AlN for advanced engines

    NASA Technical Reports Server (NTRS)

    Hebsur, Mohan (Inventor); Whittenbeger, John D. (Inventor); Lowell, Carl F. (Inventor)

    1994-01-01

    A particulate reinforced NiAl-AlN composite alloy has a NiAl matrix and greater than about 13 volume percent fine particles of AlN within the matrix. The particles preferably have a diameter from about 15 nanometers to about 50 nanometers. The particulate reinforced NiAl-AlN composite alloy may be prepared by cryomilling prealloyed NiAl in liquid nitrogen using grinding media having a diameter of from about 2 to 6 mm at an impeller speed of from about 450 RPM to about 800 RPM. The cryomilling may be done for a duration of from about 4 hours to about 20 hours to obtain a cryomilled powder. The cryomilled powder may be consolidated to form the particulate reinforced NiAl-AlN composite alloy. The particulate reinforced alloy can further include a toughening alloy. The toughening alloy may include NiCrAlY, FeCrAlY, and FeAl.

  4. Reply to Pachai et al.

    PubMed

    Harrison, William J; Bex, Peter J

    2016-05-01

    Peripheral vision is fundamentally limited by the spacing between objects. When asked to report a target's identity, observers make erroneous reports that sometimes match the identity of a nearby distractor and sometimes match a combination of target and distractor features. The classification of these errors has previously been used to support competing 'substitution' [1] or 'averaging' [2] models of the phenomenon known as 'visual crowding'. We recently proposed a single model in which both classes of error occur because observers make their reports by sampling from a biologically-plausible population of weighted responses within a region of space around the target [3]. It is critical to note that there is no probabilistic substitution or averaging process in our model; instead, we argue that neither substitution nor averaging occur, but that these are misclassifications of the distribution of reports that emerge when a population response distribution is sampled. This is a fundamentally different way of thinking about crowding, and on this basis we claim to have provided a mechanism unifying categorically distinct perceptual errors. Our goal was not to model all crowding phenomena, such as the release from crowding when target and flanks differ in color or depth [4]. Pachai et al.[5] have suggested that our model is not unifying because it inaccurately predicts perceptual performance for a particular stimulus. Although we agree that our model does not predict their data, this specific demonstration overlooks the critical aspect of the model: perceptual reports are drawn from a weighted population code. We show that Pachai et al.'s [5] own data actually provide evidence for the population code we have described [3], and we suggest a biologically-plausible analysis of their stimuli that provides a computational basis for their 'grouping' account of crowding. PMID:27166690

  5. Reply to Pachai et al.

    PubMed

    Harrison, William J; Bex, Peter J

    2016-05-01

    Peripheral vision is fundamentally limited by the spacing between objects. When asked to report a target's identity, observers make erroneous reports that sometimes match the identity of a nearby distractor and sometimes match a combination of target and distractor features. The classification of these errors has previously been used to support competing 'substitution' [1] or 'averaging' [2] models of the phenomenon known as 'visual crowding'. We recently proposed a single model in which both classes of error occur because observers make their reports by sampling from a biologically-plausible population of weighted responses within a region of space around the target [3]. It is critical to note that there is no probabilistic substitution or averaging process in our model; instead, we argue that neither substitution nor averaging occur, but that these are misclassifications of the distribution of reports that emerge when a population response distribution is sampled. This is a fundamentally different way of thinking about crowding, and on this basis we claim to have provided a mechanism unifying categorically distinct perceptual errors. Our goal was not to model all crowding phenomena, such as the release from crowding when target and flanks differ in color or depth [4]. Pachai et al.[5] have suggested that our model is not unifying because it inaccurately predicts perceptual performance for a particular stimulus. Although we agree that our model does not predict their data, this specific demonstration overlooks the critical aspect of the model: perceptual reports are drawn from a weighted population code. We show that Pachai et al.'s [5] own data actually provide evidence for the population code we have described [3], and we suggest a biologically-plausible analysis of their stimuli that provides a computational basis for their 'grouping' account of crowding.

  6. Everyday Life with ALS: A Practical Guide

    MedlinePlus

    ... course of ALS. ALS also will require some adaptations to your environment, both for safety and to ... the way, Chapter 6 will include information on adaptations for computer access. Though the chapter is called “ ...

  7. Effects of the Al content on pore structures of porous TieAl alloys

    SciTech Connect

    Jaing, Y; He, Y H; Xu, N P; Zou, J; Huang, B; Lui, C T

    2008-01-01

    Porous TieAl alloys with different nominal compositions were fabricated through a reactive synthesis of Ti and Al elemental powders. It has been found that the pore parameters vary with the Al contents, indicating that the nature of the pores can be manipulated through changing the Al contents. In addition, detailed structural characterizations showed that the fabricated porous TieAl alloys can have three crystalline phases (i.e., a2-Ti3Al, g-TiAl, and TiAl3) when using different compositions. The fundamental reasons behind these phenomena have been explored.

  8. Control del cáncer y salud mundial: noticia del Instituto Nacional del Cáncer (NCI)

    Cancer.gov

    En combinación con una reunión de alto nivel de las Naciones Unidas sobre enfermedades no transmisibles en países en vías de desarrollo, el doctor Harold Varmus, director del NCI, y el doctor Ted L. Trimble, del NCI, han publicado un comentario en Science

  9. Líneas Vitales: Programas y servicios del NCI

    Cancer.gov

    Artículos y videos sobre los programas y servicios del Instituto Nacional del Cáncer de la serie educativa Líneas Vitales del NCI, la cual está dirigida especialmente a poblaciones multiculturales.

  10. Nonstoichiometry of Al-Zr intermetallic phases

    SciTech Connect

    Radmilovic, V.; Thomas, G.

    1994-06-01

    Nonstoichiometry of metastable cubic {beta}{prime} and equilibrium tetragonal {beta} Al-Zr intermetallic phases of the nominal composition Al{sub 3}Zr in Al-rich alloys has been extensively studied. It is proposed that the ``dark contrast`` of {beta}{prime} core in {beta}{prime}/{sigma}{prime} complex precipitates, in Al-Li-Zr based alloys, is caused by incorporation of Al and Li atoms into the {beta}{prime} phase on Zr sublattice sites, forming nonstoichiometric Al-Zr intermetallic phases, rather than by Li partitioning only. {beta}{prime} particles contain very small amounts of Zr, approximately 5 at.%, much less than the stoichiometric 25 at.% in the Al{sub 3}Zr metastable phase. These particles are, according to simulation of high resolution images, of the Al{sub 3}(Al{sub 0.4}Li{sub 0.4}Zr{sub 0.2}) type. Nonstoichiometric particles of average composition Al{sub 4}Zr and Al{sub 6}Zr are observed also in the binary Al-Zr alloy, even after annealing for several hours at 600{degree}C.

  11. Cenomanian-Turonian biostratigraphy of the Jardas Al Abid area, Al Jabal Al Akhdar, northeast Libya

    NASA Astrophysics Data System (ADS)

    El Qot, Gamal M.; Abdulsamad, Esam O.

    2016-09-01

    The Upper Cenomanian-Turonian succession exposed at Jardas al'Abid area consists mainly of carbonates with siliciclastic intercalations. This succession is subdivided lithostratigraphically into: Qasr al'Abid (Late Cenomanian) and Al Baniyah (Late Cenomanian-Coniacian) formations. This sequence is relatively rich in macrofossil assemblages especially bivalves, gastropods, and echinoids with rare ammonites. Based on the first occurrence (FO) and last occurrence (LO) of some index species of these macrofossil groups, an integrated biostratigraphic framework has been constructed. The studied Cenomanian-Turonian sequence is subdivided biostratigraphically into three ammonite biozones; Pseudaspidoceras pseudonodosoides Total Range Zone, Choffaticeras segne Total Range Zone, and Coilopoceras requienianum Total Range Zone. Based on the rest of macrofossil assemblages other than the ammonites, eight biozones were recognized; Mecaster batnensis Total Range Zone, Ceratostreon flabellatum-Neithea dutrugei Acme Zone, Costagyra olisiponensis Acme Zone, Pycnodonte (Phygraea) vesicularis vesiculosa Acme Zone, Mytiloides labiatus Total Range Zone = Mecaster turonensis Acme Zone, Rachiosoma rectilineatum-Curvostrea rouvillei-Tylostoma (T.) globosum Assemblage Zone, Radiolites sp.-Apricardia? matheroni Total Range Zone, and Nerinea requieniana Total Range Zone. Most of the proposed biozones are recorded for the first time from Libya. The integration among these biozones as well as local and inter-regional correlation of the biozones have been discussed. The stage boundaries of the studied stratigraphic intervals are discussed, where the Cenomanian/Turonian boundary is delineated at the last occurrence (LO) of Pseudaspidoceras pseudonodosoides (Choffat), while the Turonian/Coniacian boundary is delineated arbitrary being agree with the LO of the Turonian fauna.

  12. Cyclic oxidation resistance of a reaction milled NiAl-AlN composite

    NASA Technical Reports Server (NTRS)

    Lowell, Carl E.; Barrett, Charles A.; Whittenberger, J. D.

    1990-01-01

    Based upon recent mechanical property tests a NiAl-AlN composite produced by cryomilling has very attractive high temperature strength. This paper focuses on the oxidation resistance of the NiAl-AlN composite at 1473 and 1573 K as compared to that of Ni-47Al-0.15Zr, one of the most oxidation resistant intermetallics. The results of cyclic oxidation tests show that the NiAl-AlN composite has excellent properties although not quite as good as those of Ni-47Al-0.15Zr. The onset of failure of the NiAl-AlN was unique in that it was not accompanied by a change in scale composition from alumina to less protective oxides. Failure in the composite appears to be related to the entrapment of AlN particles within the alumina scale.

  13. Wear behavior of Al-Al{sub 3}Ti composite manufactured by a centrifugal method

    SciTech Connect

    Watanabe, Yoshimi; Yamanaka, Noboru; Fukui, Yasuyoshi

    1999-12-01

    The purpose of the present study was to develop a wear-resistant, light Al-Al{sub 3}Ti composite material. An Al-Al{sub 3}Ti composite specimen was machined from a thick-walled tube of Al-Al{sub 3}Ti functionally graded material (FGM) manufactured by the centrifugal method from a commercial ingot of Al-5 mass% Ti master alloy. The alloy was heated to a temperature where solid Al{sub 3}Ti particles resided in a liquid Al matrix, and then the centrifugal method was carried out. Al{sub 3}Ti particles in a commercial alloy ingot exist as platelets, and this shape was maintained through the casting. Three kinds of wear specimens were prepared, taking into account the morphology of the Al{sub 3}Ti particles in the thick-walled FGM tube; the Al{sub 3}Ti particles were arranged with their platelet planes nearly normal to the radial direction as a result of the applied centrifugal force. The wear resistance of the Al-Al{sub 3}Ti composite was significantly higher than that of pure Al. Wear-resistance anisotropy and dissolution of the Al{sub 3}Ti into the Al matrix at the near-surface region, around 100 {micro}m in depth, were also observed. The mechanism of the supersaturated-layer formation and the origin of the anisotropic wear resistance are discussed.

  14. Systems Engineering Techniques for ALS Decision Making

    NASA Technical Reports Server (NTRS)

    Rodriquez, Luis F.; Drysdale, Alan E.; Jones, Harry; Levri, Julie A.

    2004-01-01

    The Advanced Life Support (ALS) Metric is the predominant tool for predicting the cost of ALS systems. Metric goals for the ALS Program are daunting, requiring a threefold increase in the ALS Metric by 2010. Confounding the problem, the rate new ALS technologies reach the maturity required for consideration in the ALS Metric and the rate at which new configurations are developed is slow, limiting the search space and potentially giving the perspective of a ALS technology, the ALS Metric may remain elusive. This paper is a sequel to a paper published in the proceedings of the 2003 ICES conference entitled, "Managing to the metric: an approach to optimizing life support costs." The conclusions of that paper state that the largest contributors to the ALS Metric should be targeted by ALS researchers and management for maximum metric reductions. Certainly, these areas potentially offer large potential benefits to future ALS missions; however, the ALS Metric is not the only decision-making tool available to the community. To facilitate decision-making within the ALS community a combination of metrics should be utilized, such as the Equivalent System Mass (ESM)-based ALS metric, but also those available through techniques such as life cycle costing and faithful consideration of the sensitivity of the assumed models and data. Often a lack of data is cited as the reason why these techniques are not considered for utilization. An existing database development effort within the ALS community, known as OPIS, may provide the opportunity to collect the necessary information to enable the proposed systems analyses. A review of these additional analysis techniques is provided, focusing on the data necessary to enable these. The discussion is concluded by proposing how the data may be utilized by analysts in the future.

  15. Instantánea del linfoma

    Cancer.gov

    Información sobre las tendencias de incidencia, mortalidad y financiamiento del NCI sobre el linfoma; así como ejemplos de actividades del NCI y adelantos en la investigación de este tipo de cáncer.

  16. Instantánea del melanoma

    Cancer.gov

    Información sobre las tendencias de incidencia, mortalidad y financiamiento del NCI sobre el melanoma; así como ejemplos de actividades del NCI y adelantos en la investigación de este tipo de cáncer.

  17. Instantánea del sarcoma

    Cancer.gov

    Información sobre las tendencias de incidencia, mortalidad y financiamiento del NCI sobre el sarcoma; así como ejemplos de actividades del NCI y adelantos en la investigación de este tipo de cáncer.

  18. Instantánea del mieloma

    Cancer.gov

    Información sobre las tendencias de incidencia, mortalidad y financiamiento del NCI sobre el mieloma; así como ejemplos de actividades del NCI y adelantos en la investigación de este tipo de cáncer.

  19. [Registry of myocardial infarction in a tertiary hospital of the Instituto Mexicano del Seguro Social].

    PubMed

    González-Pliego, José Angel; Gudiño-Amezcua, Diego Armando; Celis, Alfredo; Gutiérrez-Díaz, Gonzalo Israel

    2014-01-01

    Introducción: dado que el pronóstico de infarto del miocardio con elevación del segmento ST (IMCEST) depende de su manejo inmediato y de las medidas de prevención secundaria, el no seguir las recomendaciones actuales impide mejorar las expectativas de la población afectada por este padecimiento. El objetivo es describir el perfil clínico-epidemiológico y el proceso de atención del IMCEST en un hospital de tercer nivel. Métodos: se analiza la información clínica, la estratificación de riesgo, la terapia de revascularización y los hábitos de prescripción al egreso de los casos con IMCEST atendidos en un año. Resultados: se incluyeron 246 pacientes con edad promedio de 61 años; el 76 % fueron varones. La mayoría (37.3 %) de IMCEST ocurrió entre los 60 y los 69 años. El sedentarismo fue el factor de riesgo predominante. El 81.7 % de los casos tuvo score TIMI de riesgo bajo. El 35 % tuvo isquemia/viabilidad y en todos los cateterizados se demostraron obstrucciones coronarias. El 76 % se revascularizó con stent, principalmente farmacológico (77.5 %). Al egreso más del 90 % de los casos recibió estatina y antiplaquetarios, mientras otras drogas se prescribieron al 64-82 % de los casos. Conclusiones: el IMCEST predomina en hombres sedentarios de la séptima década. Estratificar el riesgo, buscar isquemia/viabilidad residual y revascularizar con stent farmacológico son prácticas comunes; el cumplimiento de recomendaciones basadas en la evidencia es mejor que en el pasado, pero todavía no es óptimo.

  20. Linkage disequilibria between polymorphisms of the apolipoprotein B gene signal peptide Ag(al/d) and Ag(c/g) in the Singapore Chinese

    SciTech Connect

    Heng, C.K.; Saha, N.; Tay, J.S.H.

    1994-09-01

    Three polymorphisms [insertion/deletion polymorphisms of signal peptides (ins/del), Ag(al/d) and Ag(c/g)] were studied in one hundred and ninety-five healthy Singaporean Chinese of both sexes. The respective regions of the apoB gene were amplified by polymerase chain reactions. The amplified products of Ag(al/d) and Ag(c/g) were digested by restriction enzymes AluI and ApaLI, respectively. Their DNA fragments were subsequently separated and visualized on a 2% agarose gel. Ins/del polymorphism could be typed directly on 4% agarose gel without any digestion. Computation of the chi-square and delta value revealed linkage disequilibria between ins/del and Ag(c/g) [{chi}{sup 2}=43.24, {triangle}=0.31, P<0.00001], ins/del and Ag(al/d) [{chi}{sup 2}=22.28, {triangle}=0.32, P<0.001], Ag(c/g) and Ag(al/d) [{chi}{sup 2}=106.01, {triangle}=0.63, P<0.00001].

  1. Instandhaltungsmanagement als Gestaltungsfeld Ganzheitlicher Produktionssysteme

    NASA Astrophysics Data System (ADS)

    Dombrowski, Uwe; Schulze, Sven; Otano, Isabel Crespo

    Sich kontinuierlich verändernde Rahmenbedingungen, wie beispielsweise eine steigende Variantenvielfalt, verkürzte Produktlebenszyklen sowie Kundenforderungen nach höherer Qualität, kürzeren Lieferzeiten und geringeren Kosten, fordern von produzierenden Unternehmen eine stetige Anpassung der Prozesse, der Organisation und der Strukturen. Seit den 90er Jahren versuchen immer mehr deutsche Unternehmen diesen veränderten Anforderungen mit der Einführung eines Ganzheitlichen Produktionssystems (GPS) zu begegnen. Ganzheitliche Produktionssysteme sind dabei in ihren Grundlagen an das Toyota Produktionssystem angelehnt, vereinigen aber auch weitere Methoden zu einem unternehmensspezifischen Regelwerk. Im Rahmen des langfristigen Trends zu unternehmensindividuellen Produktionssystemen wird sowohl in der Industrie als auch in der Forschung intensiv über das Toyota Produktionssystem, Lean Production, Lean Management und Ganzheitliche Produktionssysteme diskutiert, werden Konzepte zu Implementierung und Betrieb erstellt und die Wirtschaftlichkeit untersucht.

  2. Structure and stability of the AlX and AlX{sup {minus}} species

    SciTech Connect

    Gutsev, G.L.; Jena, P.; Bartlett, R.J.

    1999-02-01

    The electronic and geometrical structures of the ground and low-lying excited states of the diatomic AlX and AlX{sup {minus}} series (X=H, Li, Be, B, C, N, O, and F) are calculated by the coupled-cluster method with all singles and doubles and noniterative inclusion of triples using a large atomic natural orbital basis. All the ground-state AlX molecules except for AlF can attach an additional electron and form ground-state AlX{sup {minus}} anions. The ground-state AlBe{sup {minus}}, AlB{sup {minus}}, AlC{sup {minus}}, AlN{sup {minus}}, and AlO{sup {minus}} anions possess excited states that are stable toward autodetachment of an extra electron; AlBe{sup {minus}} also has a second excited state. Low-lying excited states of all AlX but AlN can attach an extra electron and form anionic states that are stable with respect to their neutral (excited) parent states. The ground-state AlLi{sup {minus}}, AlBe{sup {minus}}, AlB{sup {minus}}, AlN{sup {minus}}, and AlO{sup {minus}} anions are found to be thermodynamically more stable than their neutral parents. The most stable is AlO{sup {minus}}, whose dissociation energy to Al+O{sup {minus}} is 6.4 eV. Correspondingly, AlO possesses the largest electron affinity (2.65 eV) in the series. {copyright} {ital 1999 American Institute of Physics.}

  3. Accumulation of Al in Root Mucilage of an Al-Resistant and an Al-Sensitive Cultivar of Wheat.

    PubMed Central

    Archambault, D. J.; Zhang, G.; Taylor, G. J.

    1996-01-01

    To estimate rates of Al accumulation within the symplasm, all apoplastic pools of Al need to be eliminated or accounted for. We have developed a revised kinetic protocol that allows us to estimate the contribution of mucilage-bound Al to total, nonexchangeable Al, and to eliminate the mucilage as an apoplastic pool of Al. By comparing the Al content of excised root tips (2 cm) of wheat (Triticum aestivum L.) with and without the removal of the mucilage (using a 10-min wash in 1 M NH4Cl), we found that Al bound to the mucilage accounted for approximately 25 to 35% of Al remaining after desorption in citric acid. The kinetics of Al uptake into mucilage were biphasic, with a rapid phase occurring in the first 30 min of uptake, followed by a linear phase occurring in the remainder of the experimental period (180 min). By adopting a step for removal of mucilage into our existing kinetic protocol, we have been able to isolate a linear phase of uptake with only a slight deviation from linearity in the first 5 min. Although we cannot unambiguously identify this phase of uptake as uptake into the symplasm, we believe this new protocol provides us with the most accurate quantitative estimate of symplastic Al yet available. PMID:12226458

  4. Magnetism of Al-substituted magnetite reduced from Al-hematite

    NASA Astrophysics Data System (ADS)

    Jiang, Zhaoxia; Liu, Qingsong; Zhao, Xiang; Roberts, Andrew P.; Heslop, David; Barrón, Vidal; Torrent, José

    2016-06-01

    Aluminum-substituted magnetite (Al-magnetite) reduced from Al-substituted hematite or goethite (Al-hematite or Al-goethite) is an environmentally important constituent of magnetically enhanced soils. In order to characterize the magnetic properties of Al-magnetite, two series of Al-magnetite samples were synthesized through reduction of Al-hematite by a mixed gas (80% CO2 and 20% CO) at 395°C for 72 h in a quartz tube furnace. Al-magnetite samples inherited the morphology of their parent Al-hematite samples, but only those transformed from Al-hematite synthesized at low temperature possessed surficial micropores, which originated from the release of structural water during heating. Surface micropores could thus serve as a practical fingerprint of fire or other high-temperature mineralogical alteration processes in natural environments, e.g., shear friction in seismic zones. In addition, Al substitution greatly affects the magnetic properties of Al-magnetite. For example, coercivity (Bc) increases with increasing Al content and then decreases slightly, while the saturation magnetization (Ms), Curie temperature (Tc), and Verwey transition temperature (Tv) all decrease with increasing Al content due to crystal defect formation and dilution of magnetic ions caused by Al incorporation. Moreover, different trends in the correlation between Tc and Bc can be used to discriminate titanomagnetite from Al-magnetite, which is likely to be important in environmental and paleomagnetic studies, particularly in soil.

  5. Reactive Plasma Spraying of Fine Al2O3/AlN Feedstock Powder

    NASA Astrophysics Data System (ADS)

    Shahien, Mohammed; Yamada, Motohiro; Yasui, Toshiaki; Fukumoto, Masahiro

    2013-12-01

    Reactive plasma spraying (RPS) is a promising technology for in situ formation of aluminum nitride (AlN) coatings. Recently, AlN-based coatings were fabricated by RPS of alumina (Al2O3) powder in N2/H2 thermal plasma. This study investigated the feasibility of RPS of a fine Al2O3/AlN mixture and the influence of the plasma gases (N2, H2) on the nitriding conversion, and coating microstructure and properties. Thick AlN/Al2O3 coatings with high nitride content were successfully fabricated. The coatings consist of h-AlN, c-AlN, Al5O6N, γ-Al2O3, and a small amount of α-Al2O3. Use of fine particles enhanced the nitriding conversion and the melting tendency by increasing the surface area. Furthermore, the AlN additive improved the AlN content in the coatings. Increasing the N2 gas flow rate improved the nitride content and complete crystal growth to the h-AlN phase, and enhanced the coating thickness. On the other hand, though the H2 gas is required for plasma nitriding of the Al2O3 particles, increasing its flow rate decreased the nitride content and the coating thickness. Remarkable influence of the plasma gases on the coating composition, microstructure, and properties was observed during RPS of the fine particles.

  6. 77 FR 73732 - In the Matter of Amendment of the Designation of al-Qa'ida in Iraq, aka Jam'at al Tawhid wa'al...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-11

    ... al-Rafidayn, aka The Organization of al-Jihad's Base of Operations in Iraq, aka al-Qaida of Jihad in Iraq, aka al-Qaida in Iraq, aka al-Qaida in Mesopotamia, aka al-Qaida in the Land of the Two Rivers, aka al-Qaida of the Jihad in the Land of the Two Rivers, aka al-Qaida of Jihad Organization in......

  7. A comparison of mechanical properties between Al and Al3Mg

    NASA Astrophysics Data System (ADS)

    Yang, Rong; Tang, Bin; Gao, Tao

    2016-11-01

    On the basis of first principles calculations, we have calculated the elastic properties, stress-strain relations, ideal tensile strengths, ideal shear strengths, and the ideal compressed strengths of Al and Al3Mg. The stress-strain relations of Al3Mg are strikingly similar to those of Al, indicating that the crystal structure appears to be more important than the identity of the individual atoms during uniaxial deformation. Al3Mg is found to have larger moduli and higher strengths than Al but less ductile than Al. So Al3Mg is expected to be a harder material, consistent with its exploitation in Al precipitate-hardening mechanisms. The calculated elastic properties, tensile strengths and shear strengths of Al are consistent with experimental values or previous theoretical results. We also use another method (molecular dynamics (MD) simulations) to recalculate elastic constants, ideal tensile and compressed strength of Al3Mg for checking and comparing. We find that the results obtained by the two methods agree well with each other. The failure modes under uniaxial <100> tension are also explored for Al and Al3Mg. Our calculations confirm that Al fail by shear and predict that Al3Mg also fail by shear.

  8. Influences of Al particles on the microstructure and property of electrodeposited Ni-Al composite coatings

    NASA Astrophysics Data System (ADS)

    Cai, Fei; Jiang, Chuanhai

    2014-02-01

    Ni-Al composite coatings with different contents of Al microparticles were prepared from a conventional Watt bath. The influences of Al particle loadings in the bath on the surface morphology, composition, texture, grain size, microstrain, residual stress and anti-corrosion of the Ni-Al composite coating were investigated. The friction coefficients of the coatings at 200 °C were also evaluated by a pin-on-disctribometer. The results showed that the surface morphology of the coatings changed from pyramid + colonied structure to colonied structure with increasing Al particle loadings. The (2 0 0) preferred orientation for pure Ni coating evolved to random orientation with increasing Al particle loadings. The grain size obtained the minimum value of 72.28 nm at Al particle loading of 100 g/L and the microstrain of the coating increased with increasing the Al particle loadings. The incorporation of Al particles decreased the residual stress of the electro-deposited coating and all the coatings deposited at different Al particle loadings possessed low residual stress. As the Al particle loading increased, the anti-corrosion of the Ni-Al coatings increased owing to the combined effect of increasing Al content in the coatings and the texture evolution from (2 0 0) plane to (1 1 1) plane. The wear result suggested that the increasing Al particle content did not improve the wear performance of the Ni-Al composite coatings.

  9. Interfacial phenomena in the reactions of Al-B, Al-Ti-B, and Al-Zr-B alloys with KF-AlF{sub 3} and NaF-AlF{sub 3} melts

    SciTech Connect

    Lee, M.S.; Terry, B.S.; Grieveson, P.

    1993-12-01

    The interfacial phenomena occurring during the contacting of liquid Al-B, Al-Ti-B, and Al-Zr-B melts with KF-AlF{sub 3} liquid fluxes have been investigated by optical examination of quenched metal drops previously immersed in the liquid fluxes. Reactions in the Al-B/KF-AlF{sub 3} system involve the formation of metastable AlB{sub 12} at the metal/flux interface. At high KBF{sub 4} levels in the flux, the AlB{sub 12} is dispersed in the flux and also at low KBF{sub 4} levels in the metal. Reactions in the Al-Ti-B/KF-AlF{sub 3} system involve the formation of TiB{sub 2}, which may be dispersed in either the metal or the flux depending upon the composition of the flux. The results obtained for the Al-Ti-B/NaF-AlF{sub 3} and Al-Zr-B/KF-AlF{sub 3} systems were similar to those observed for the Al-Ti-B/KF-AlF{sub 3} system.

  10. Estimaciones de Prevalencia del VIH por Género y Grupo de Riesgo en Tijuana, México: 2006

    PubMed Central

    Iñiguez-Stevens, Esmeralda; Brouwer, Kimberly C.; Hogg, Robert S.; Patterson, Thomas L.; Lozada, Remedios; Magis-Rodriguez, Carlos; Elder, John P.; Viani, Rolando M.; Strathdee, Steffanie A.

    2010-01-01

    OBJETIVO Estimar la prevalencia del VIH en adultos de 15-49 años de edad en Tijuana, México - en la población general y en subgrupos de riesgo en el 2006. METODOS Se obtuvieron datos demográficos del censo Mexicano del 2005, y la prevalencia del VIH se obtuvo de la literatura. Se construyó un modelo de prevalencia del VIH para la población general y de acuerdo al género. El análisis de sensibilidad consistió en estimar errores estándar del promedio-ponderado de la prevalencia del VIH y tomar derivados parciales con respecto a cada parámetro. RESULTADOS La prevalencia del VIH es 0.54%(N = 4,347) (Rango: 0.22%–0.86%, (N = 1,750–6,944)). Esto sugiere que 0.85%(Rango: 0.39%–1.31%) de los hombres y 0.22%(Rango: 0.04%–0.40%) de las mujeres podrían ser VIH-positivos. Los hombres que tienen sexo con hombres (HSH), las trabajadoras sexuales usuarias de drogas inyectables (MTS-UDI), MTS-noUDI, mujeres UDI, y los hombres UDI contribuyeron las proporciones más elevadas de personas infectadas por el VIH. CONCLUSIONES El número de adultos VIH-positivos entre subgrupos de riesgo en la población de Tijuana es considerable, marcando la necesidad de enforcar las intervenciones de prevención en sus necesidades específicas. El presente modelo estima que hasta 1 en cada 116 adultos podrían ser VIH-positivos. PMID:19685824

  11. Growth and Stress-induced Transformation of Zinc blende AlN Layers in Al-AlN-TiN Multilayers

    PubMed Central

    Li, Nan; Yadav, Satyesh K.; Wang, Jian; Liu, Xiang-Yang; Misra, Amit

    2015-01-01

    AlN nanolayers in sputter deposited {111}Al/AlN/TiN multilayers exhibit the metastable zinc-blende-structure (z-AlN). Based on density function theory calculations, the growth of the z-AlN is ascribed to the kinetically and energetically favored nitridation of the deposited aluminium layer. In situ nanoindentation of the as-deposited {111}Al/AlN/TiN multilayers in a high-resolution transmission electron microscope revealed the z-AlN to wurzite AlN phase transformation through collective glide of Shockley partial dislocations on every two {111} planes of the z-AlN. PMID:26681109

  12. Growth and stress-induced transformation of zinc blende AlN layers in Al-AlN-TiN multilayers

    DOE PAGESBeta

    Li, Nan; Yadav, Satyesh K.; Wang, Jian; Liu, Xiang -Yang; Misra, Amit

    2015-12-18

    We report that AlN nanolayers in sputter deposited {111}Al/AlN/TiN multilayers exhibit the metastable zinc-blende-structure (z-AlN). Based on density function theory calculations, the growth of the z-AlN is ascribed to the kinetically and energetically favored nitridation of the deposited aluminium layer. In situ nanoindentation of the as-deposited {111}Al/AlN/TiN multilayers in a high-resolution transmission electron microscope revealed the z-AlN to wurzite AlN phase transformation through collective glide of Shockley partial dislocations on every two {111} planes of the z-AlN.

  13. Mechanical alloying of nb-al powders

    NASA Astrophysics Data System (ADS)

    Peng, Zhixue; Suryanarayana, C.; Froes, F. H. (Sam)

    1996-01-01

    The effect of mechanical alloying (MA) on solid solubility extension, nanostructure formation, amorphization, intermetallic compound formation, and the occurrence of a face-centered cubic (fcc) phase in the Nb-Al system has been studied. Solid solubility extension was observed in both the terminal compositions and intermetallic compounds: 15 pct Nb in Al and 60 pct Al in Nb, well beyond the equilibrium and even rapid solidification levels (2.4 pct Nb and 25 pct Al, respectively) and increased homogeneity range for the NbAl3 phase. Nanostructured grains formed in all compositions. In the central part of the phase diagram, amorphization occurred predominantly. Only NbAl3, the most stable intermetallic, formed during MA; in most cases, a subsequent anneal was required. On long milling time, an fcc phase, probably a nitride, formed as a result of contamination from the ambient atmosphere.

  14. Mechanical alloying of Nb-Al powders

    SciTech Connect

    Peng, Z.; Suryanarayana, C.; Froes, F.H.

    1996-01-01

    The effect of mechanical alloying (MA) on solid solubility extension, nanostructure formation, amorphization, intermetallic compound formation, and the occurrence of a face-centered cubic (fcc) phase in the Nb-Al system has been studied. Solid solubility extension was observed in both the terminal compositions and intermetallic compounds: 15 pct Nb in Al and 60 pct Al in Nb, well beyond the equilibrium and even rapid solidification levels (2.4 pct Nb and 25 pct Al, respectively) and increased homogeneity range for the NbAl{sub 3} phase. Nanostructured grains formed in all compositions. In the central part of the phase diagram, amorphization occurred predominantly. Only NbAl{sub 3}, the most stable intermetallic, formed during MA; in most cases, a subsequent anneal was required. On long milling time, an fcc phase, probably a nitride, formed as a result of contamination from the ambient atmosphere.

  15. Orientation relationship of eutectoid FeAl and FeAl2

    PubMed Central

    Scherf, A.; Kauffmann, A.; Kauffmann-Weiss, S.; Scherer, T.; Li, X.; Stein, F.; Heilmaier, M.

    2016-01-01

    Fe–Al alloys in the aluminium range of 55–65 at.% exhibit a lamellar microstructure of B2-ordered FeAl and triclinic FeAl2, which is caused by a eutectoid decomposition of the high-temperature Fe5Al8 phase, the so-called ∊ phase. The orientation relationship of FeAl and FeAl2 has previously been studied by Bastin et al. [J. Cryst. Growth (1978 ▸), 43, 745] and Hirata et al. [Philos. Mag. Lett. (2008 ▸), 88, 491]. Since both results are based on different crystallographic data regarding FeAl2, the data are re-evaluated with respect to a recent re-determination of the FeAl2 phase provided by Chumak et al. [Acta Cryst. (2010 ▸), C66, i87]. It is found that both orientation relationships match subsequent to a rotation operation of 180° about a 〈112〉 crystallographic axis of FeAl or by applying the inversion symmetry of the FeAl2 crystal structure as suggested by the Chumak data set. Experimental evidence for the validity of the previously determined orientation relationships was found in as-cast fully lamellar material (random texture) as well as directionally solidified material (∼〈110〉FeAl || solidification direction) by means of orientation imaging microscopy and global texture measurements. In addition, a preferential interface between FeAl and FeAl2 was identified by means of trace analyses using cross sectioning with a focused ion beam. On the basis of these habit planes the orientation relationship between the two phases can be described by (01)FeAl || (114) and [111]FeAl || [10]. There is no evidence for twinning within FeAl lamellae or alternating orientations of FeAl lamellae. Based on the determined orientation and interface data, an atomistic model of the structure relationship of Fe5Al8, FeAl and FeAl2 in the vicinity of the eutectoid decomposition is derived. This model is analysed with respect to the strain which has to be accommodated at the interface of FeAl and FeAl2. PMID:27047304

  16. A New Phase in ALS Research.

    PubMed

    Chong, P Andrew; Forman-Kay, Julie D

    2016-09-01

    In this issue of Structure, Conicella et al. (2016) present evidence that the low complexity C-terminal region of TDP-43 undergoes liquid-liquid phase separation. ALS-associated mutations alter this phase separation process, providing a possible mechanism for the pathology caused by these TDP-43 mutations. The work is strongly supportive of toxic loss of RNA processing function in ALS. PMID:27602988

  17. Tensile Behavior of Al2o3/feal + B and Al2o3/fecraly Composites

    NASA Technical Reports Server (NTRS)

    Draper, S. L.; Eldridge, J. I.; Aiken, B. J. M.

    1995-01-01

    The feasibility of Al2O3/FeAl + B and Al2O3/FeCrAlY composites for high-temperature applications was assessed. The major emphasis was on tensile behavior of both the monolithics and composites from 298 to 1100 K. However, the study also included determining the chemical compatibility of the composites, measuring the interfacial shear strengths, and investigating the effect of processing on the strength of the single-crystal Al2O3 fibers. The interfacial shear strengths were low for Al203/FeAl + B and moderate to high for Al203/FeCrAlY. The difference in interfacial bond strengths between the two systems affected the tensile behavior of the composites. The strength of the Al203 fiber was significantly degraded after composite processing for both composite systems and resulted in poor composite tensile properties. The ultimate tensile strength (UTS) values of the composites could generally be predicted with either rule of mixtures (ROM) calculations or existing models when using the strength of the etched-out fiber. The Al2O3/FeAl + B composite system was determined to be unfeasible due to poor interfacial shear strengths and a large mismatch in coefficient of thermal expansion (CTE). Development of the Al2O3/FeCrAlY system would require an effective diffusion barrier to minimize the fiber strength degradation during processing and elevated temperature service.

  18. Produccion Gaseosa del Cometa Halley: Erupciones Y Fotodisociacion del Radical OH

    NASA Astrophysics Data System (ADS)

    Silva, A. M.; Mirabel, I. F.

    1990-11-01

    RESUMEN:En este trabajo informamos la detecci6n de 20 erupciones en la li'nea de =18cm (1667MHz) del radical OH en el Cometa Halley.Las observaciones incluyen todos los monitoreos existentes y se extienden desde 120 dias antes del perihelio hasta 90 dias despues.Se detectan bruscos crecimientos en el flujo medido,hasta un factor 1O,seguidos por decaimientos lentos asociados con la fotodisociaci6n del OH. Se obtuvieron valores para el tiempo de vida fotoquimico del OH y del H2O basandose en el modelo desarrollado previamente por Silva(1988). Esos tiempos de vida estan de acuerdo con predicciones teoricas y con las observaciones en el Ultravioleta, y los resultados, los que son fuertemente dependientes de la velocidad heliocentrica del Coineta (variando hasta un factor 6), han sido calculados para varios rangos de velocidad entre +28 y -28 km/seg. Key wo'L :

  19. Memory deficits and retrieval processes in ALS.

    PubMed

    Mantovan, M C; Baggio, L; Dalla Barba, G; Smith, P; Pegoraro, E; Soraru', G; Bonometto, P; Angelini, C

    2003-05-01

    Subtle neuropsychological deficits have been described in patients affected by amyotrophic lateral sclerosis (ALS) without dementia. Overall, selective impairment in memory function has been reported, but the source of memory impairment in ALS has yet to be defined. We performed neuropsychological screening in 20 ALS patients. Semantic encoding and post-encoding cue effects on the retrieval of word lists were investigated in the ALS patients and normal controls. Severity of memory impairment was correlated to cerebral blood perfusion detected by single photon emission computed tomography (SPECT). ALS patients showed moderate impairments in frontal and memory tests. Short-term memory was normal, while serial position retrieval of word lists with normal recency effect but poor primacy effect showed long-term memory deficit. ALS patients performed better in cued encoding than in cued post-encoding recall condition. In the cued post-encoding condition, the primacy effect in word list recall improved significantly in controls, but not in ALS patients, as compared with both the free recall and cued encoding conditions. SPECT hypoperfusion was observed in frontal and temporal areas in ALS patients. ALS patients showed a long-term memory deficit which did not improve in cued post-encoding condition as it does for controls. We hypothesize abnormal retrieval processes related to frontal lobe dysfunction which entails difficulties in generating stable long-memory traces at encoding.

  20. Memory deficits and retrieval processes in ALS.

    PubMed

    Mantovan, M C; Baggio, L; Dalla Barba, G; Smith, P; Pegoraro, E; Soraru', G; Bonometto, P; Angelini, C

    2003-05-01

    Subtle neuropsychological deficits have been described in patients affected by amyotrophic lateral sclerosis (ALS) without dementia. Overall, selective impairment in memory function has been reported, but the source of memory impairment in ALS has yet to be defined. We performed neuropsychological screening in 20 ALS patients. Semantic encoding and post-encoding cue effects on the retrieval of word lists were investigated in the ALS patients and normal controls. Severity of memory impairment was correlated to cerebral blood perfusion detected by single photon emission computed tomography (SPECT). ALS patients showed moderate impairments in frontal and memory tests. Short-term memory was normal, while serial position retrieval of word lists with normal recency effect but poor primacy effect showed long-term memory deficit. ALS patients performed better in cued encoding than in cued post-encoding recall condition. In the cued post-encoding condition, the primacy effect in word list recall improved significantly in controls, but not in ALS patients, as compared with both the free recall and cued encoding conditions. SPECT hypoperfusion was observed in frontal and temporal areas in ALS patients. ALS patients showed a long-term memory deficit which did not improve in cued post-encoding condition as it does for controls. We hypothesize abnormal retrieval processes related to frontal lobe dysfunction which entails difficulties in generating stable long-memory traces at encoding. PMID:12752394

  1. Genetics of Familial and Sporadic ALS

    ClinicalTrials.gov

    2016-03-21

    Amyotrophic Lateral Sclerosis (ALS); Familial Amyotrophic Lateral Sclerosis; Amyotrophic Lateral Sclerosis With Frontotemporal Dementia; Lou Gehrig's Disease; Motor Neuron Disease; Primary Lateral Sclerosis

  2. Superbend era begins swiftly at the ALS

    SciTech Connect

    Robinson, Art; Tamura, Lori

    2001-11-29

    The successful installation and commissioning of high-field superconducting bend magnets (superbends) in three curved sectors of ALS storage ring was the first time the magnet lattice of an operating synchrotron light source has been retrofitted in this fundamental way. As a result, the ALS now offers an expanded spectral range well into the hard x-ray region without compromising either the number of undulators or their high brightness in the soft x-ray region for which the ALS design was originally optimized. In sum, when the superbend-enhanced ALS started up for user operations in October 2001, it marked the beginning of a new era in its history.

  3. Effects of the Al content on pore structures of porous TieAl alloys

    SciTech Connect

    Jiang, Y; He, Y H; Zou, J; Huang, B; Liu, C

    2008-01-01

    PorousTi Alalloys with different nominal compositions were fabricated through a reactive synthesis of Ti and Al elemental powders. It has been found that the pore parameters vary with the Al contents, indicating that the nature of the pores can be manipulated through changing the Al contents. In addition, detailed structural characterizations showed that the fabricated porousTi Alalloys can have three crystalline phases (i.e., 2-Ti3Al, -TiAl, and TiAl3) when using different compositions. The fundamental reasons behind these phenomena have been explored.

  4. Response to Signorovitch et al.

    PubMed

    Flot, Jean-François; Debortoli, Nicolas; Hallet, Bernard; Van Doninck, Karine

    2016-08-22

    Signorovitch et al.[1] comment that an Oenothera-like meiosis [2] could produce a pattern similar to what we observed in our study of natural isolates of the bdelloid rotifer Adineta vaga, which we attributed to horizontal gene transfers (HGTs) [3]. Indeed, our HGT hypothesis appears at first sight difficult to conciliate with their observation of a congruent pattern of allele sharing at four large loci possibly located on different chromosomes [4]. However, one might imagine conditions under which massive horizontal gene transfer between bdelloid individuals could produce such a pattern, notably if the individuals involved had previously lost most of their heterozygosity because of their exposure to frequent desiccation (which produces DNA double-strand breaks [5]). In the published A. vaga genome the loss of heterozygosity due to large-scale gene conversion events or break-induced replication covers only about 10% of the genome [6], but this percentage may be much higher in environmental isolates that often experience dessication. Besides, if an Oenothera-like mode of meiosis occurs in bdelloids frequently enough to be detected in a single sampling of 29 individuals (as in [4]), one would expect males and meiosis to be observed at least occasionally, and instances of congruent allele sharing across loci should turn up frequently in genetic surveys. This was not the case in [3]: among the 82 A. vaga individuals sequenced for four nuclear markers, no trio of individuals presented congruent patterns of shared sequences at different loci. For these reasons, and in the absence of any direct evidence for an Oenothera-like meiosis in bdelloids, we still consider inter-bdelloid HGTs a more parsimonious explanation for our results. PMID:27554651

  5. Desarrollo de un instrumento para medir percepciones sobre el contexto de construccion del conocimiento cientifico de estudiantes universitarios de nuevo ingreso

    NASA Astrophysics Data System (ADS)

    Garcia-Ramirez, Jaime Antonio

    En esta investigacion, se desarrollo un instrumento que permite medir percepciones relacionadas al contexto de constriccion del conocimiento cientifico. Se examinaron instrumentos existentes y se encontro que el VOSTS (Views on science, technology, and society), instrumento desarrollado empiricamente en Canada por Aikenhead, Ryan y Fleming, podia traducirse y validarse en el contexto cultural puertorriqueno. El instrumento es extenso, consta de 113 reactivos, cada uno con una premisa basica relacionada a la tematica ciencia, tecnologia y sociedad y un numero de alternativas relacionadas a la premisa que oscila entre siete y trece. Se delimito su utilizacion a los quince reactivos identificados por los autores como relacionados a la construccion social del conocimiento cientifico. Metodologicamente, se procedio a utilizar el modelo de adaptacion intercultural, que permite que el instrumento desarrollado satisfaga las dimensiones de equivalencia semantica, de contenido, tecnica, de criterio y conceptual, atemperado asi al instrumento original. Se cumplio con este proposito mediante la traduccion de la version original en ingles al espanol y viceversa. Se utilizaron comites para examinar la traduccion y la retro-traduccion del instrumento. Se realizo una prueba piloto con estudiantes universitarios de nuevo ingreso, utilizando el instrumento traducido para asegurar su intelegibilidad. La confiabilidad del instrumento se determino mediante la intervencion de un panel de expertos quienes clasificaron las distintas posiciones dentro de cada reactivo en: realista, con merito e ingenua; se transformaron estas opciones en valores numericos lo que permitio establecer una escala Likert para cada una. Se suministro el instrumento a una muestra de estudiantes universitarios de nuevo ingreso con caracteristicas similares a las de la poblacion puertorriquena en cuanto a ejecucion en las pruebas de aptitud verbal y matematica del College Board. Los resultados de sus contestaciones

  6. [Breve commento sull'importanza spesso sottovalutata degli approcci psicologici e riabilitativi nella gestione del dolore oncologico].

    PubMed

    Cascella, Marco; Simonds Thompson, Nicholas; Muzio, Maria Rosaria; Forte, Cira Antonietta; Cuomo, Arturo

    2016-08-01

    Riassunto. L'approccio farmacologico personalizzato (tailored) rappresenta la terapia standard per i pazienti affetti da dolore oncologico, consentendo il controllo della sintomatologia in circa il 90% dei casi. Qualora tale strategia risulti inefficace è possibile ricorrere a più complesse tecniche, invasive o mini-invasive. Tuttavia, sia da parte dei pazienti sia degli operatori viene sottostimato il disagio psicologico sotteso al dolore oncologico e non si considerano i potenziali benefici dei trattamenti di supporto psicologico e riabilitativi nella gestione del dolore da cancro. Queste strategie non farmacologiche dovrebbero essere parte integrante di un più globale approccio multidisciplinare alla terapia del dolore, affiancando e amplificando gli effetti della terapia farmacologica. Tale breve rassegna narrativa ha la finalità di offrire una panoramica sul ruolo dei possibili interventi psicologici e riabilitativi atti al miglioramento della qualità della vita in pazienti affetti da dolore oncologico.

  7. Atomic structure and oxygen deficiency of the ultrathin aluminium oxide barrier in Al/AlOx/Al Josephson junctions

    NASA Astrophysics Data System (ADS)

    Zeng, Lunjie; Tran, Dung Trung; Tai, Cheuk-Wai; Svensson, Gunnar; Olsson, Eva

    2016-07-01

    Al/AlOx/Al Josephson junctions are the building blocks of a wide range of superconducting quantum devices that are key elements for quantum computers, extremely sensitive magnetometers and radiation detectors. The properties of the junctions and the superconducting quantum devices are determined by the atomic structure of the tunnel barrier. The nanoscale dimension and disordered nature of the barrier oxide have been challenges for the direct experimental investigation of the atomic structure of the tunnel barrier. Here we show that the miniaturized dimension of the barrier and the interfacial interaction between crystalline Al and amorphous AlOx give rise to oxygen deficiency at the metal/oxide interfaces. In the interior of the barrier, the oxide resembles the atomic structure of bulk aluminium oxide. Atomic defects such as oxygen vacancies at the interfaces can be the origin of the two-level systems and contribute to decoherence and noise in superconducting quantum circuits.

  8. Strengthening of Al and Al-Mg alloy wires by melt inoculation with Al/MgB2 nanocomposite

    NASA Astrophysics Data System (ADS)

    Florián-Algarín, David; Marrero, Raúl; Padilla, Alexandra; Suárez, Oscar Marcelo

    2015-12-01

    This study hinges on the feasibility of strengthening Al and Al-Mg wires by adding Al nanocomposite pellets containing MgB2 nanoparticles into the melt upon fabrication. These MgB2 nanoparticles were obtained by fragmentation using a high-energy ball mill, and were, afterward, mechanically alloyed with pure aluminum. The resulting MgB2/Al nanocomposite pellets were sintered at 260°C to be subsequently added into molten aluminum and an Al-Mg alloy melt. Cold rolling intercalated with stepwise annealing allowed the fabrication of 1 mm diameter wires with a final area reduction of 96%. Mechanical and physical properties of the treated wire specimens were compared to those of similarly processed pure aluminum wire. The ultimate tensile strength of the treated wires increased approximately double fold with respect to untreated wires at the expense of some loss in electrical conductivity.

  9. Atomic structure and oxygen deficiency of the ultrathin aluminium oxide barrier in Al/AlOx/Al Josephson junctions.

    PubMed

    Zeng, Lunjie; Tran, Dung Trung; Tai, Cheuk-Wai; Svensson, Gunnar; Olsson, Eva

    2016-01-01

    Al/AlOx/Al Josephson junctions are the building blocks of a wide range of superconducting quantum devices that are key elements for quantum computers, extremely sensitive magnetometers and radiation detectors. The properties of the junctions and the superconducting quantum devices are determined by the atomic structure of the tunnel barrier. The nanoscale dimension and disordered nature of the barrier oxide have been challenges for the direct experimental investigation of the atomic structure of the tunnel barrier. Here we show that the miniaturized dimension of the barrier and the interfacial interaction between crystalline Al and amorphous AlOx give rise to oxygen deficiency at the metal/oxide interfaces. In the interior of the barrier, the oxide resembles the atomic structure of bulk aluminium oxide. Atomic defects such as oxygen vacancies at the interfaces can be the origin of the two-level systems and contribute to decoherence and noise in superconducting quantum circuits. PMID:27403611

  10. Atomic structure and oxygen deficiency of the ultrathin aluminium oxide barrier in Al/AlOx/Al Josephson junctions

    PubMed Central

    Zeng, Lunjie; Tran, Dung Trung; Tai, Cheuk-Wai; Svensson, Gunnar; Olsson, Eva

    2016-01-01

    Al/AlOx/Al Josephson junctions are the building blocks of a wide range of superconducting quantum devices that are key elements for quantum computers, extremely sensitive magnetometers and radiation detectors. The properties of the junctions and the superconducting quantum devices are determined by the atomic structure of the tunnel barrier. The nanoscale dimension and disordered nature of the barrier oxide have been challenges for the direct experimental investigation of the atomic structure of the tunnel barrier. Here we show that the miniaturized dimension of the barrier and the interfacial interaction between crystalline Al and amorphous AlOx give rise to oxygen deficiency at the metal/oxide interfaces. In the interior of the barrier, the oxide resembles the atomic structure of bulk aluminium oxide. Atomic defects such as oxygen vacancies at the interfaces can be the origin of the two-level systems and contribute to decoherence and noise in superconducting quantum circuits. PMID:27403611

  11. Atomic structure and oxygen deficiency of the ultrathin aluminium oxide barrier in Al/AlOx/Al Josephson junctions.

    PubMed

    Zeng, Lunjie; Tran, Dung Trung; Tai, Cheuk-Wai; Svensson, Gunnar; Olsson, Eva

    2016-07-12

    Al/AlOx/Al Josephson junctions are the building blocks of a wide range of superconducting quantum devices that are key elements for quantum computers, extremely sensitive magnetometers and radiation detectors. The properties of the junctions and the superconducting quantum devices are determined by the atomic structure of the tunnel barrier. The nanoscale dimension and disordered nature of the barrier oxide have been challenges for the direct experimental investigation of the atomic structure of the tunnel barrier. Here we show that the miniaturized dimension of the barrier and the interfacial interaction between crystalline Al and amorphous AlOx give rise to oxygen deficiency at the metal/oxide interfaces. In the interior of the barrier, the oxide resembles the atomic structure of bulk aluminium oxide. Atomic defects such as oxygen vacancies at the interfaces can be the origin of the two-level systems and contribute to decoherence and noise in superconducting quantum circuits.

  12. Influence of AlN thickness on AlGaN epilayer grown by MOCVD

    NASA Astrophysics Data System (ADS)

    Jayasakthi, M.; Juillaguet, S.; Peyre, H.; Konczewicz, L.; Baskar, K.; Contreras, S.

    2016-10-01

    AlGaN/AlN layers were grown by metalorganic chemical vapor deposition (MOCVD) on sapphire substrates. The AlN buffer thickness was varied from 400 nm to 800 nm. The AlGaN layer thickness was 1000 nm. The crystalline quality, thickness and composition of AlGaN were determined using high resolution X-ray diffraction (HRXRD). The threading dislocation density (TDD) was found to decrease with increase of AlN layer thickness. Reciprocal space mapping (RSM) was used to estimate the strain and relaxation between AlGaN and AlN. The optical properties of AlGaN layers were investigated by temperature dependent photoluminescence (PL). PL intensities of AlGaN layers increases with increasing the AlN thickness. The surface morphology of AlGaN was studied by atomic force microscopy (AFM). Root mean square (RMS) roughness values were found to be decreased while increase of AlN thickness.

  13. Highly ordered antigorite from Cerro del Almirez HP-HT serpentinites, SE Spain

    NASA Astrophysics Data System (ADS)

    Padrón-Navarta, J. A.; López Sánchez-Vizcaíno, V.; Garrido, C. J.; Gómez-Pugnaire, M. T.; Jabaloy, A.; Capitani, G. C.; Mellini, M.

    2008-11-01

    The Cerro del Almirez ultramafic massif offers an example of high pressure and high temperature antigorite serpentinites. A sharp antigorite-out isograd separates them from Chl-harzburgites, consisting of olivine + enstatite + chlorite. Antigorite is characterized by aluminium contents as high as 4 wt.% Al2O3. The microstructural study shows that, prior to the transformation, antigorite is exceptionally ordered and consists of the polysome m = 17. No polysomatic defect occurs in antigorite forming most of the Cerro del Almirez serpentinites. Close to the antigorite-out isograd, limited disorder features may occur, mainly as (001) twins, reaction rims and reduction of m down to 14-15. Here, local recrystallization phenomena lead to sporadic growth of large antigorite and chlorite crystals.

  14. Gonadal dysgenesis in del (18p) syndrome

    SciTech Connect

    Telvi, L.; Ion, A.; Fouquet, F.

    1995-07-17

    We report on a girl with syndromal gonadal dysgenesis and a de novo del (18p). Genetic factors controlling gonadal development are located not only on the X chromosome, but also on autosomes. The present case suggests that one of these genes is situated on 18p. We conclude that patients with del (18p) syndrome should be evaluated for gonadal dysgenesis. 16 refs., 3 figs.

  15. Large residuals on geoidal heights determined on the Fagnano Lake, Tierra del Fuego-Argentina

    NASA Astrophysics Data System (ADS)

    Gomez, M. E.; Del Cogliano, D.; Perdomo, R.

    2013-05-01

    A new geoid model was developed in Tierra del Fuego and it was evaluated in the area of Fagnano Lake. The model was developed by means of the Equivalent Source Technique combining gravity data, levelling information measured on the province and observations of a GPS buoy on the Fagnano Lake. Those GPS buoy measurements provide information of the mean lake level surface (Del Cogliano et al., 2007). A cross validation process was realized in order to evaluate the model on the lake. What allowed determining a 6 cm geoid in the area of Fagnano Lake. Also, an evaluation of the EGM2008 (Pavlis et al., 2008) was made on the lake. Its behaviour was compared to that observed on the levelling lines. Differences of several decimetres were found when EGM2008 undulations were compared to observed geoid undulations in the lake area. In the regions where EGM2008 has included real gravimetric observations, differences between model and observations were only of a few centimetres. Such model has the particularity that includes fill-in gravity in that region. The above mentioned evaluation derived in an analysis of the effect that not representative gravity information could have on the estimation of geoid undulations in high mountainous regions. We found that this effect could be significant if there is no real information in the computing area (Gomez et al, 2012).

  16. Brief clinical report: interstitial deletion of the long arm of chromosome 10: del(10)(q11.2q21).

    PubMed

    Holden, J J; MacDonald, E A

    1985-02-01

    A de novo interstitial deletion of part of the long arm of chromosome 10 [del(10)(q11.2q21)] was identified by GTG (G-bands by trypsin using Giemsa) banding in a 9-year-old girl with mental retardation and minor anomalies. Only one other case of a similar deletion has been reported [Ray et al, 1980] and the phenotypic findings of the two cases are compared. PMID:2579554

  17. Inventario mundial de la calidad del carbon mineral (WoCQI) [The world coal quality inventory (WoCQI)

    USGS Publications Warehouse

    Finkelman, R.B.; Lovern, V.S.

    2001-01-01

    Los oficiales encargados de la politica comercial de cada pais requieren informacion clara y precisa sobre el recurso del carbon mineral, particularmente sobre sus propiedades y caracteristicas, para tomar decisiones bien fundamentadas con respecto al mejor uso de los recursos naturales, necesidades de importacion y oportunidades de exportacion, objetivos de politica interna y externa, oportunidades de transferencia tecnologica, posibilidades de inversion externa, estudios ambientales y de salud, y asuntos relacionados con el uso de productos secundarios y su disposicion.

  18. "Estudio tribologico de aceros para moldes. Aplicacion al moldeo por inyeccion de polibutilentereftalato reforzado con fibra de vidrio"

    NASA Astrophysics Data System (ADS)

    Martinez Mateo, Isidoro Jose

    Mould materials for injection moulding of polymers and polymer-matrix composites represent a relevant industrial economic sector due to the large quantity of pieces and components processed. The material selection for mould manufacturing, its composition and heat treatment, the hardening procedures and machining and finishing processes determine the service performance and life of the mould. In the first part of the present study, the relationship between the hardness and microstructure and the wear resistance of mould steels from large blocks has been studied by pin-on-disc tests, studying the main wear mechanisms. In order to determine the surface damage on mould steels under real injection conditions, different commercial steels have been studied by measuring the variation of surface roughness with the number of injected pieces with different reinforcement percentages and different mould geometries, by using optical profilometry and scanning electron microscopy techniques. It was important to determine the variation of surface roughness of the moulded pieces with the number of injection operations. The materials used were polybutyleneterephthalate pure and reinforced with either 20% or 50% glass fibre. For the different mould designs, the evolution of the glass fibre orientation with injection flow has been determined by image analysis and related to roughness changes and surface damage, both of the composite parts and of the mould steel surface. Finally, the abrasion resistance of the composite parts has been studied by scratch tests as a function of the number of injected parts and of the scratch direction with respect to injection flow and glass fibre orientation. Los materiales para moldes de inyeccion de polimeros y materiales compuestos representan un sector economicamente muy relevante debido al gran aumento del numero de componentes fabricados a partir de materiales polimericos obtenidos mediante moldeo por inyeccion. La seleccion del material para la

  19. Diana Al-Hadid: Identity and Heritage

    ERIC Educational Resources Information Center

    Jungerberg, Tom; Smith, Anna; Borsh, Colleen

    2012-01-01

    Diana Al-Hadid's sculptures reflect the many locations, cultures, histories, and mythologies that have shaped her as an artist. In large-scale works which have the appearance of architectural ruins, Al-Hadid employs imagery drawn from many diverse interests including science and technology, history, and literature. She also incorporates images and…

  20. Quantitatively Probing the Al Distribution in Zeolites

    SciTech Connect

    Vjunov, Aleksei; Fulton, John L.; Huthwelker, Thomas; Pin, Sonia; Mei, Donghai; Schenter, Gregory K.; Govind, Niranjan; Camaioni, Donald M.; Hu, Jian Z.; Lercher, Johannes A.

    2014-06-11

    The degree of substitution of Si4+ by Al3+ in the oxygen-terminated tetrahedra (Al T-sites) of zeolites determines the concentration of ion-exchange and Brønsted acid sites. As the location of the tetrahedra and the associated subtle variations in bond angles influence the acid strength, quantitative information about Al T-sites in the framework is critical to rationalize catalytic properties and to design new catalysts. A quantitative analysis is reported that uses a combination of extended X-ray absorption fine structure (EXAFS) analysis and 27Al MAS NMR spectroscopy supported by DFT-based molecular dynamics simulations. To discriminate individual Al atoms, sets of ab initio EXAFS spectra for various T-sites are generated from DFT-based molecular dynamics simulations allowing quantitative treatment of the EXAFS single- and multiple-photoelectron scattering processes out to 3-4 atom shells surrounding the Al absorption center. It is observed that identical zeolite types show dramatically different Al-distributions. A preference of Al for T-sites that are part of one or more 4-member rings in the framework over those T-sites that are part of only 5- and 6-member rings in the HBEA150 sample has been determined from a combination of these methods. This work was supported by the U. S. Department of Energy (DOE), Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences.

  1. Durability Assessment of TiAl Alloys

    NASA Technical Reports Server (NTRS)

    Draper, Susan L.; Lerch, Bradley A.

    2008-01-01

    The durability of TiAl is a prime concern for the implementation of TiAl into aerospace engines. Two durability issues, the effect of high temperature exposure on mechanical properties and impact resistance, have been investigated and the results are summarized in this paper. Exposure to elevated temperatures has been shown to be detrimental to the room temperature ductility of gamma alloys with the most likely mechanisms being the ingress of interstitials from the surface. Fluorine ion implantation has been shown to improve the oxidation resistance of gamma alloys, and ideally it could also improve the environmental embrittlement of high Nb content TiAl alloys. The effect of F ion implantation on the surface oxidation and embrittlement of a third generation, high Nb content TiAl alloy (Ti-45Al-5Nb-B-C) were investigated. Additionally, the ballistic impact resistance of a variety of gamma alloys, including Ti-48Al-2Cr- 2Nb, Ti-47Al-2Cr-2Nb, ABB-2, ABB-23, NCG359E, 95A and Ti-45Al-5Nb-B-C was accessed. Differences in the ballistic impact properties of the various alloys will be discussed, particularly with respect to their manufacturing process, microstructure, and tensile properties.

  2. Energetics of Al13 Keggin cluster compounds

    PubMed Central

    Armstrong, Christopher R.; Casey, William H.; Navrotsky, Alexandra

    2011-01-01

    The ϵ-Al13 Keggin aluminum hydroxide clusters are essential models in establishing molecular pathways for geochemical reactions. Enthalpies of formation are reported for two salts of aluminum centered ϵ-Keggin clusters, Al13 selenate, (Na(AlO4)Al12(OH)24(SeO4)4•12H2O) and Al13 sulfate, (NaAlO4Al12(OH)24(SO4)4•12H2O). The measured enthalpies of solution, ΔHsol, at 28 °C in 5 N HCl for the ε-Al13 selenate and sulfate are −924.57 (± 3.83) and −944.30 ( ± 5.66) kJ·mol-1, respectively. The enthalpies of formation from the elements, ΔHf,el, for Al13 selenate and sulfate are −19,656.35 ( ± 67.30) kJ·mol-1, and −20,892.39 ( ± 70.01) kJ·mol-1, respectively. In addition, ΔHf,el for sodium selenate decahydrate was calculated using data from high temperature oxide melt solution calorimetry measurements: −4,006.39 ( ± 11.91) kJ·mol-1. The formation of both ε-Al13 Keggin cluster compounds is exothermic from oxide-based components but energetically unfavorable with respect to a gibbsite-based assemblage. To understand the relative affinity of the ϵ-Keggin clusters for selenate and sulfate, the enthalpy associated with two S-Se exchange reactions was calculated. In the solid state, selenium is favored in the Al13 compound relative to the binary chalcogenate, while in 5 N HCl, sulfur is energetically favored in the cluster compound compared to the aqueous solution. This contribution represents the first thermodynamic study of ε-Al13 cluster compounds and establishes a method for other such molecules, including the substituted versions that have been created for kinetic studies. Underscoring the importance of ε-Al13 clusters in natural and anthropogenic systems, these data provide conclusive thermodynamic evidence that the Al13 Keggin cluster is a crucial intermediate species in the formation pathway from aqueous aluminum monomers to aluminum hydroxide precipitates. PMID:21852572

  3. NiAl alloys for structural uses

    NASA Technical Reports Server (NTRS)

    Koss, D. A.

    1991-01-01

    Alloys based on the intermetallic compound NiAl are of technological interest as high temperature structural alloys. These alloys possess a relatively low density, high melting temperature, good thermal conductivity, and (usually) good oxidation resistance. However, NiAl and NiAl-base alloys suffer from poor fracture resistance at low temperatures as well as inadequate creep strength at elevated temperatures. This research program explored macroalloying additions to NiAl-base alloys in order to identify possible alloying and processing routes which promote both low temperature fracture toughness and high temperature strength. Initial results from the study examined the additions of Fe, Co, and Hf on the microstructure, deformation, and fracture resistance of NiAl-based alloys. Of significance were the observations that the presence of the gamma-prime phase, based on Ni3Al, could enhance the fracture resistance if the gamma-prime were present as a continuous grain boundary film or 'necklace'; and the Ni-35Al-20Fe alloy was ductile in ribbon form despite a microstructure consisting solely of the B2 beta phase based on NiAl. The ductility inherent in the Ni-35Al-20Fe alloy was explored further in subsequent studies. Those results confirm the presence of ductility in the Ni-35Al-20Fe alloy after rapid cooling from 750 - 1000 C. However exposure at 550 C caused embrittlement; this was associated with an age-hardening reaction caused by the formation of Fe-rich precipitates. In contrast, to the Ni-35Al-20Fe alloy, exploratory research indicated that compositions in the range of Ni-35Al-12Fe retain the ordered B2 structure of NiAl, are ductile, and do not age-harden or embrittle after thermal exposure. Thus, our recent efforts have focused on the behavior of the Ni-35Al-12Fe alloy. A second parallel effort initiated in this program was to use an alternate processing technique, mechanical alloying, to improve the properties of NiAl-alloys. Mechanical alloying in the

  4. Corrosion Studies of 2195 Al-Li Alloy and 2219 Al Alloy with Differing Surface Treatments

    NASA Technical Reports Server (NTRS)

    Danford, M. D.; Mendrek, M. J.

    1998-01-01

    Corrosion studies of 2195 Al-Li and 2219 Al alloys have been conducted using the scanning reference electrode technique (SRET) and the polarization resistance (PR) technique. The SRET was used to study corrosion mechanisms, while corrosion rate measurements were studied with the PR technique. Plates of Al203 blasted, soda blasted and conversion coated 2219 Al were coated with Deft primer and the corrosion rates studied with the EIS technique. Results from all of these studies are presented.

  5. Consolidation of Al2O3/Al Nanocomposite Powder by Cold Spray

    NASA Astrophysics Data System (ADS)

    Poirier, Dominique; Legoux, Jean-Gabriel; Drew, Robin A. L.; Gauvin, Raynald

    2011-01-01

    While the improvement in mechanical properties of nanocomposites makes them attractive materials for structural applications, their processing still presents significant challenges. In this article, cold spray was used to consolidate milled Al and Al2O3/Al nanocomposite powders as well as the initial unmilled and unreinforced Al powder. The microstructure and nanohardness of the feedstock powders as well as those of the resulting coatings were compared. The results show that the large increase in hardness of the Al powder after mechanical milling is preserved after cold spraying. Good quality coating with low porosity is obtained from milled Al. However, the addition of Al2O3 to the Al powder during milling decreases the powder and coating nanohardness. This lower hardness is attributed to non-optimized milling parameters leading to cracked particles with insufficient Al2O3 embedding in Al. The coating produced from the milled Al2O3/Al mixture also showed lower particle cohesion and higher amount of porosity.

  6. Spatially Controlled Fe Isotope Variations at Torres del Paine

    NASA Astrophysics Data System (ADS)

    Gajos, N.; Lundstrom, C.

    2013-12-01

    experimental results [1] fractional crystallization involving magnetite-melt fractionation should produce isotopically light melts, contrary to the isotopic signature seen in Torres. On the other hand, magnetite-fluid experiments show that late-stage fluid exsolution in plutons has the potential to produce isotopic signatures similar to Torres del Paine [1]. However, the amount of fractionation is highly dependent on the amount of Fe saturated in the fluid. The fractionation trend of Fe is also consistent with thermal migration experiments [3]. The spatial partitioning of heavy Fe at the felsic margins of the pluton and light Fe at the mafic base of the pluton is also consistent with this mechanism. The co-variation with other non-traditional stable isotope systems provides a crucial test to assessing the effects of thermal migration. [1] Belinker et al. (2012) AGU Meeting Abstract. [2] Heimann A. et al. (2008) GCA 72, 4379-4396.[3] Lundstrom (2009) GCA 73, 5709-5729.

  7. Japanese version of the ALS-FTD-Questionnaire (ALS-FTD-Q-J).

    PubMed

    Watanabe, Yasuhiro; Beeldman, Emma; Raaphorst, Joost; Izumi, Yuishin; Yoshino, Hiide; Masuda, Michihito; Atsuta, Naoki; Ito, Satoru; Adachi, Tadashi; Adachi, Yoshiki; Yokota, Osamu; Oda, Masaya; Hanashima, Ritsuko; Ogino, Mieko; Ichikawa, Hiroo; Hasegawa, Kazuko; Kimura, Hideki; Shimizu, Toshio; Aiba, Ikuko; Yabe, Hayato; Kanba, Makoto; Kusumi, Kimiyoshi; Aoki, Tetsuya; Hiroe, Yu; Watanabe, Hirohisa; Nishiyama, Kazutoshi; Nomoto, Masahiro; Sobue, Gen; Nakashima, Kenji

    2016-08-15

    Amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD) share common clinical, genetic and neuropathological features. Some ALS patients have behavioral/personality changes, which could result in significant obstacles in the care provided by family members and caregivers. An easy screening tool would contribute greatly to the evaluation of these symptoms. We translated the ALS-FTD-Questionnaire, developed in the Netherlands, into Japanese (ALS-FTD-Q-J) and examined the clinimetric properties (internal consistency, construct and clinical validity). Patients with ALS and/or behavioral variant FTD (bvFTD) were evaluated alongside healthy controls in this multicenter study. All ALS patients, regardless of bvFTD status, were further evaluated by the frontal behavioral inventory (FBI) and for frontal/executive function, cognition, anxiety/depression, and motor functions. Data from 146 subjects were analyzed: ALS (92), ALS-bvFTD (6), bvFTD (16), and healthy controls (32). The internal consistency of the ALS-FTD-Q-J was good (Cronbach α=0.92). The ALS-FTD-Q-J showed construct validity as it exhibited a high correlation with the FBI (r=0.79). However, correlations were moderate with anxiety/depression and low with cognitive scales, in contrast to the original report, i.e. a moderate correlation with cognition and a low correlation with anxiety/depression. The ALS-FTD-Q-J discriminated ALS patients from (ALS-)bvFTD patients and controls. Thus, the ALS-FTD-Q-J is useful for evaluating Japanese ALS/FTD patients.

  8. Japanese version of the ALS-FTD-Questionnaire (ALS-FTD-Q-J).

    PubMed

    Watanabe, Yasuhiro; Beeldman, Emma; Raaphorst, Joost; Izumi, Yuishin; Yoshino, Hiide; Masuda, Michihito; Atsuta, Naoki; Ito, Satoru; Adachi, Tadashi; Adachi, Yoshiki; Yokota, Osamu; Oda, Masaya; Hanashima, Ritsuko; Ogino, Mieko; Ichikawa, Hiroo; Hasegawa, Kazuko; Kimura, Hideki; Shimizu, Toshio; Aiba, Ikuko; Yabe, Hayato; Kanba, Makoto; Kusumi, Kimiyoshi; Aoki, Tetsuya; Hiroe, Yu; Watanabe, Hirohisa; Nishiyama, Kazutoshi; Nomoto, Masahiro; Sobue, Gen; Nakashima, Kenji

    2016-08-15

    Amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD) share common clinical, genetic and neuropathological features. Some ALS patients have behavioral/personality changes, which could result in significant obstacles in the care provided by family members and caregivers. An easy screening tool would contribute greatly to the evaluation of these symptoms. We translated the ALS-FTD-Questionnaire, developed in the Netherlands, into Japanese (ALS-FTD-Q-J) and examined the clinimetric properties (internal consistency, construct and clinical validity). Patients with ALS and/or behavioral variant FTD (bvFTD) were evaluated alongside healthy controls in this multicenter study. All ALS patients, regardless of bvFTD status, were further evaluated by the frontal behavioral inventory (FBI) and for frontal/executive function, cognition, anxiety/depression, and motor functions. Data from 146 subjects were analyzed: ALS (92), ALS-bvFTD (6), bvFTD (16), and healthy controls (32). The internal consistency of the ALS-FTD-Q-J was good (Cronbach α=0.92). The ALS-FTD-Q-J showed construct validity as it exhibited a high correlation with the FBI (r=0.79). However, correlations were moderate with anxiety/depression and low with cognitive scales, in contrast to the original report, i.e. a moderate correlation with cognition and a low correlation with anxiety/depression. The ALS-FTD-Q-J discriminated ALS patients from (ALS-)bvFTD patients and controls. Thus, the ALS-FTD-Q-J is useful for evaluating Japanese ALS/FTD patients. PMID:27423564

  9. Intertextual Sexual Politics: Illness and Desire in Enrique Gomez Carrillo's "Del amor", "del dolor y del vicio" and Aurora Caceres's "La rosa muerta"

    ERIC Educational Resources Information Center

    LaGreca, Nancy

    2012-01-01

    This study explores the intertextuality between Aurora Caceres's "La rosa muerta" (1914) and the novel "Del amor, del dolor y del vicio" (1898) by her ex-husband, Enrique Gomez Carrillo. Caceres strategically mentions Gomez Carrillo's novel in "La rosa muerta" to invite a reading of her work in dialogue with his. Both narratives follow the sexual…

  10. A new discontinuously reinforced aluminum MMC: Al+AlB{sub 2} flakes

    SciTech Connect

    HALL,AARON C.; ECONOMY,J.

    2000-06-08

    Development of a novel metal matrix composite based on the Al-B alloy system has been undertaken. Preparation of this discontinuously reinforced material is based on the precipitation of high aspect ratio AlB{sub 2} from an Al-B alloy. This paper describes a number of efforts forced on preparing high volume fractions (> 30 v%) of AlB{sub 2} in aluminum. New insights into the behavior of the Al-B alloys system allowed this effort to be successful.

  11. Atomistic Modeling of RuAl and (RuNi) Al Alloys

    NASA Technical Reports Server (NTRS)

    Gargano, Pablo; Mosca, Hugo; Bozzolo, Guillermo; Noebe, Ronald D.; Gray, Hugh R. (Technical Monitor)

    2002-01-01

    Atomistic modeling of RuAl and RuAlNi alloys, using the BFS (Bozzolo-Ferrante-Smith) method for alloys is performed. The lattice parameter and energy of formation of B2 RuAl as a function of stoichiometry and the lattice parameter of (Ru(sub 50-x)Ni(sub x)Al(sub 50)) alloys as a function of Ni concentration are computed. BFS based Monte Carlo simulations indicate that compositions close to Ru25Ni25Al50 are single phase with no obvious evidence of a miscibility gap and separation of the individual B2 phases.

  12. Effects of hydrogen absorption in TbNiAl and UNiAl

    SciTech Connect

    Bordallo, H.N.; Nakotte, H.; Schultz, A.; Kolomiets, A.V.; Havela, L.; Andreev, A.V.

    1998-12-31

    Although hydrides of intermetallic compounds are used extensively as hydrogen-storage media, little is known about the exact nature of metal-hydrogen interactions. However, this knowledge is of essential importance for the understanding of thermodynamics and other properties. Hydrides (deuterides) of TbNiAl and UNiAl have been widely studied because of drastic increase of magnetic ordering temperature under hydrogenation. Here the authors report neutron-diffraction results of the three deuterides, TbNiAlD{sub 1.28}, TbNiAlD{sub 0.8}a nd UNiAlD{sub 2.23}.

  13. Arsenate uptake by Al nanoclusters and other Al-based sorbents during water treatment.

    PubMed

    Mertens, Jasmin; Rose, Jérôme; Wehrli, Bernhard; Furrer, Gerhard

    2016-01-01

    In many parts of the world, arsenic from geogenic and anthropogenic sources deteriorates the quality of drinking water resources. Effective methods of arsenic removal include adsorption and coagulation with iron- and aluminum-based materials, of which polyaluminum chloride is widely employed as coagulant in water treatment due to its low cost and high efficiency. We compared the arsenic uptake capacity and the arsenic bonding sites of different Al-based sorbents, including Al nanoclusters, polyaluminum chloride, polyaluminum granulate, and gibbsite. Extended X-ray absorption fine structure (EXAFS) spectroscopy revealed that As(V) forms bidentate-binuclear complexes in interaction with all Al-based removal agents. The octahedral configuration of nanoclusters and the distribution of sorption sites remain the same in all types of removal agents consisting of nano-scale Al oxyhydroxide particles. The obtained distances for As(V)-O and As(V)-Al agreed with previously published data and were found to be 1.69 ± 0.02 Å and 3.17-3.21 Å, respectively. Our study suggests that As(V) binds to Al nanoclusters as strongly as to Al oxide surfaces. The As sorption capacity of Al nanoclusters was found to be very similar to that of Al clusters in a polyaluminum chloride. The most efficient Al-based sorbents for arsenic removal were Al nanoclusters, followed by polyaluminum granulate. PMID:26613179

  14. Hybrid Al + Al3Ni metallic foams synthesized in situ via laser engineered net shaping

    NASA Astrophysics Data System (ADS)

    Zheng, Baolong; Li, Ying; Smugeresky, John E.; Zhou, Yizhang; Baker, Dean; Lavernia, Enrique J.

    2011-09-01

    A hybrid, Al + Al3Ni metallic foam was synthesized in situ via laser engineered net shaping (LENS®) of Ni-coated 6061 Al powder in the absence of a foaming agent. During LENS® processing, the Ni coating reacted with the Al matrix, resulting in the simultaneous formation of a fine dispersion of Al3Ni, and a high volume fraction of porosity. As a reinforcement phase, the intermetallic compound formed particles with a size range of 1-5 µm and a volume fraction of 63%, with accompanying 35-300 µm pores with a 60% volume fraction. The microstructure of the as-deposited Al + Al3Ni composite foams was characterized using SEM, EDS, XRD and TEM/HRTEM techniques. The evolution of the microstructure was analyzed on the basis of the thermal field present during deposition, paying particular attention to the thermodynamics of the Al3Ni intermetallic compound formation as well as discussing the mechanisms that may be responsible for the observed porosity. The mechanical behavior of the as-deposited material was characterized using compression and microhardness testing, indicating that the yield strength and hardness are 190 MPa and 320 HV, respectively, which represents an increase of over three times higher than that of annealed Al6061, or similar to heat-treated Al6061 fully dense matrix, and much higher than those of traditional Al alloy foams, and with a low density of 1.64 g/m3.

  15. Ni{sub 3}Al aluminide alloys

    SciTech Connect

    Liu, C.T.

    1993-10-01

    This paper provides a brief review of the recent progress in research and development of Ni{sub 3}Al and its alloys. Emphasis has been placed on understanding low ductility and brittle fracture of Ni{sub 3}Al alloys at ambient and elevated temperatures. Recent studies have resulted in identifying both intrinsic and extrinsic factors governing the fracture behavior of Ni{sub 3}Al alloys. Parallel efforts on alloy design using physical metallurgy principles have led to properties for structural use. Industrial interest in these alloys is high, and examples of industrial involvement in processing and utilization of these alloys are briefly mentioned.

  16. InAlN/AlN/GaN heterostructures for high electron mobility transistors

    NASA Astrophysics Data System (ADS)

    Usov, S. O.; Sakharov, A. V.; Tsatsulnikov, A. F.; Lundin, V. W.; Zavarin, E. E.; Nikolaev, A. E.; Yagovkina, M. A.; Zemlyakov, V. E.; Egorkin, V. I.; Ustinov, V. M.

    2016-08-01

    The results of development of InAlN/AlN/GaN heterostructures, grown on sapphire substrates by metal-organic chemical vapour deposition, and high electron mobility transistors (HEMTs) based on them are presented. The dependencies of the InAlN/AlN/GaN heterostructure properties on epitaxial growth conditions were investigated. The optimal indium content and InAlN barrier layer thicknesses of the heterostructures for HEMT s were determined. The possibility to improve the characteristics of HEMTs by in-situ passivation by Si3N4 thin protective layer deposited in the same epitaxial process was demonstrated. The InAlN/AlN/GaN heterostructure grown on sapphire substrate with diameter of 100 mm were obtained with sufficiently uniform distribution of sheet resistance. The HEMTs with saturation current of 1600 mA/mm and transconductance of 230 mS/mm are demonstrated.

  17. A Rechargeable Al/S Battery with an Ionic-Liquid Electrolyte.

    PubMed

    Gao, Tao; Li, Xiaogang; Wang, Xiwen; Hu, Junkai; Han, Fudong; Fan, Xiulin; Suo, Liumin; Pearse, Alex J; Lee, Sang Bok; Rubloff, Gary W; Gaskell, Karen J; Noked, Malachi; Wang, Chunsheng

    2016-08-16

    Aluminum metal is a promising anode material for next generation rechargeable batteries owing to its abundance, potentially dendrite-free deposition, and high capacity. The rechargeable aluminum/sulfur (Al/S) battery is of great interest owing to its high energy density (1340 Wh kg(-1) ) and low cost. However, Al/S chemistry suffers poor reversibility owing to the difficulty of oxidizing AlSx . Herein, we demonstrate the first reversible Al/S battery in ionic-liquid electrolyte with an activated carbon cloth/sulfur composite cathode. Electrochemical, spectroscopic, and microscopic results suggest that sulfur undergoes a solid-state conversion reaction in the electrolyte. Kinetics analysis identifies that the slow solid-state sulfur conversion reaction causes large voltage hysteresis and limits the energy efficiency of the system.

  18. High performance AlGaN/GaN HEMTs with AlN/SiNx passivation

    NASA Astrophysics Data System (ADS)

    Xin, Tan; Yuanjie, Lü; Guodong, Gu; Li, Wang; Shaobo, Dun; Xubo, Song; Hongyu, Guo; Jiayun, Yin; Shujun, Cai; Zhihong, Feng

    2015-07-01

    AlGaN/GaN high electron-mobility transistors (HEMTs) with 5 nm AlN passivation by plasma enhanced atomic layer deposition (PEALD) were fabricated, covered by 50 nm SiNx which was grown by plasma enhanced chemical vapor deposition (PECVD). With PEALD AlN passivation, current collapse was suppressed more effectively and the devices show better subthreshold characteristics. Moreover, the insertion of AlN increased the RF transconductance, which lead to a higher cut-off frequency. Temperature dependence of DC characteristics demonstrated that the degradations of drain current and maximum transconductance at elevated temperatures for the AlN/SiNx passivated devices were much smaller compared with the devices with SiNx passivation, indicating that PEALD AlN passivation can improve the high temperature operation of the AlGaN/GaN HEMTs. Project supported by the National Natural Science Foundation of China (No. 60890192).

  19. A Rechargeable Al/S Battery with an Ionic-Liquid Electrolyte.

    PubMed

    Gao, Tao; Li, Xiaogang; Wang, Xiwen; Hu, Junkai; Han, Fudong; Fan, Xiulin; Suo, Liumin; Pearse, Alex J; Lee, Sang Bok; Rubloff, Gary W; Gaskell, Karen J; Noked, Malachi; Wang, Chunsheng

    2016-08-16

    Aluminum metal is a promising anode material for next generation rechargeable batteries owing to its abundance, potentially dendrite-free deposition, and high capacity. The rechargeable aluminum/sulfur (Al/S) battery is of great interest owing to its high energy density (1340 Wh kg(-1) ) and low cost. However, Al/S chemistry suffers poor reversibility owing to the difficulty of oxidizing AlSx . Herein, we demonstrate the first reversible Al/S battery in ionic-liquid electrolyte with an activated carbon cloth/sulfur composite cathode. Electrochemical, spectroscopic, and microscopic results suggest that sulfur undergoes a solid-state conversion reaction in the electrolyte. Kinetics analysis identifies that the slow solid-state sulfur conversion reaction causes large voltage hysteresis and limits the energy efficiency of the system. PMID:27417442

  20. Fabrication and characterization of all-refractory NbCN/Al/AlO(x)/Al/Nb junctions

    NASA Astrophysics Data System (ADS)

    Barber, Z. H.; Blamire, M. G.; Somekh, R. E.; Evetts, J. E.

    1993-03-01

    High-quality AlO(x) tunnel barriers have been fabricated on epitaxial niobium carbonitride (NbCN) base layers by the deposition of an Al layer followed by thermal oxidation. By careful control of its uniformity, the thickness of the Al layer has been reduced to less than 3 nm, which results in an average gap voltage, Vg(NbCN), of up to 2.65 mV. Using a self-aligned whole-wafer processing route, high-quality NbCN/Al/AlO(x)/Al/Nb junctions as small as 0.6 sq mm have been made. These junctions offer considerable advantages over directly deposited barriers in terms of minimal subgap leakage, good control of the barrier conductance, and simple processing procedures. It was shown that submicron junctions can be fabricated with no gap smearing or reduction in quality. Using only Nb counterelectrodes total gap voltages up to 4.0 mV, with widths of 0.6 mV, have been demonstrated in high-quality junctions.

  1. Characterization of AlInN/AlN/GaN Heterostructures with Different AlN Buffer Thickness

    NASA Astrophysics Data System (ADS)

    Çörekçi, S.; Dugan, S.; Öztürk, M. K.; Çetin, S. Ş.; Çakmak, M.; Özçelik, S.; Özbay, E.

    2016-07-01

    Two AlInN/AlN/GaN heterostructures with 280-nm- and 400-nm-thick AlN buffer grown on sapphire substrates by metal-organic chemical vapor deposition (MOCVD) have been investigated by x-ray diffraction (XRD), atomic force microscopy (AFM), photoluminescence (PL) and Hall-effect measurements. The symmetric (0002) plane with respect to the asymmetric (10bar{1}2) plane in the 280-nm-thick AlN buffer has a higher crystal quality, as opposed to the 400-nm-thick buffer. The thinner buffer improves the crystallinity of both (0002) and (10bar{1}2) planes in the GaN layers, it also provides a sizeable reduction in dislocation density of GaN. Furthermore, the lower buffer thickness leads to a good quality surface with an rms roughness of 0.30 nm and a dark spot density of 4.0 × 108 cm-2. The optical and transport properties of the AlInN/AlN/GaN structure with the relatively thin buffer are compatible with the enhancement in its structural quality, as verified by XRD and AFM results.

  2. Interdiffusion in Diffusion Couples: U-Mo v. Al and Al-Si

    SciTech Connect

    D. D. Keiser, Jr.; E. Perez; B. Yao; Y. H. Sohn

    2009-11-01

    Interdiffusion and microstructural development in the U-Mo-Al system was examined using solid-tosolid diffusion couples consisting of U-7wt.%Mo, U-10wt.%Mo and U-12wt.%Mo vs. pure Al, annealed at 600°C for 24 hours. The influence of Si alloying addition (up to 5 wt.%) in Al on the interdiffusion microstructural development was also examined using solid-to-solid diffusion couples consisting of U-7wt.%Mo, U-10wt.%Mo and U-12wt.%Mo vs. pure Al, Al-2wt.%Si, and Al-5wt.%Si annealed at 550°C up to 20 hours. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and electron probe microanalysis (EPMA) were employed to examine the development of a very fine multiphase intermetallic layer. In ternary U-Mo-Al diffusion couples annealed at 600°C for 24 hours, interdiffusion microstructure varied of finely dispersed UAl3, UAl4, U6Mo4Al43, and UMo2Al20 phases while the average composition throughout the interdiffusion zone remained constant at approximately 80 at.% Al. Interdiffusion microstructure observed by SEM/TEM analyses and diffusion paths drawn from concentration profiles determined by EPMA appear to deviate from the assumption of “local thermodynamic equilibrium,” and suggest that interdiffusion occurs via supersaturated UAl4 followed by equilibrium transformation into UAl3, U6Mo4Al43, UAl4 and UMo2Al20 phases. Similar observation was made for U-Mo vs. Al diffusion couples annealed at 550°C. The addition of Si (up to 5 wt.%) in Al significantly reduced the thickness of the intermetallic layer by changing the constituent phases of the interdiffusion zone developed in U-Mo vs. Al-Si diffusion couples. Specifically, the formation of (U,Mo)(Al,Si)3 with relatively large solubility for Mo and Si, along with UMo2Al20 phases was observed along with disappearance of U6Mo4Al43 and UAl4 phases. Simplified understanding based on U-Al, U-Si, and Mo-Si binary phase diagrams is discussed in the light of the beneficial effect of Si alloying addition.

  3. Smoking Tied to Shorter Survival with ALS

    MedlinePlus

    ... with ALS between 2007 and 2011 in northern Italy. They also looked at chronic lung disease (COPD) ... of neuroscience at the University of Turin in Italy, led the study. SOURCE: BMJ , news release, Sept. ...

  4. Stem Cells Deemed Safe for ALS Patients

    MedlinePlus

    ... baby step forward," said lead researcher Dr. Jonathan Glass, of Emory University, in Atlanta. "We can say this procedure is doable in ALS patients," Glass said. "Now we have to test whether it's ...

  5. Glial cells in ALS: the missing link?

    PubMed

    Raibon, Elsa; Todd, Lisa Marie; Möller, Thomas

    2008-08-01

    Amyotrophic lateral sclerosis (ALS) was initially known as Charcot's sclerosis, named after the French neurobiologist and physician Jean-Martin Charcot who first described this type of muscular atrophy in the early nineteenth century. In the United States, ALS became widely known as Lou Gehrig's disease after the famous baseball player who succumbed to the disease in the late 1930s. Currently, ALS is the most common motor neuron disease, with a worldwide incidence of 8 cases per 100,000 population per year. Familial forms constitute approximately 5% to 10% of all cases. Onset increases with age, with a peak in the seventh decade and a slight preponderance (relative risk, 1.3-1.5) among men compared with women. Rapid progression of motor neuron loss leads to death an average of 3 to 5 years after symptom onset. The cause of ALS remains unknown and there is still no curative therapy.

  6. Thermal Conductivity of Al-Salt Composites

    NASA Astrophysics Data System (ADS)

    Li, Peng; Zhang, Mei; Wang, Lijun; Seetharaman, Seshadri

    2015-11-01

    With a view to examine the possibility of estimating the content of entrapped metallic aluminium in the salt cake from aluminium remelting, the thermal diffusivity of reference composites of KCl-NaCl-Al was measured as a function of aluminium metal content at room temperature. The thermal conductivity of the reference composites was found to increase with the metallic Al content. The lumped parameter model approach was carried out to discuss the influence of different geometry arrangements of each phase, viz. air, salts and metallic aluminium on the thermal conductivity. Application of the present results to industrial samples indicates that factors such as the interfacial condition of metallic Al particles have to be considered in order to estimate the amount of entrapped Al in the salt cake.

  7. 12th Annual ALS Users' Association Meeting

    SciTech Connect

    Robinson, Arthur L.

    1999-12-17

    Science took the front seat as 219 Advanced Light Source (ALS) users and staff gathered on Monday and Tuesday, October 18 and 19 for the twelfth annual users' meeting. The bulk of the meeting was dedicated to reports on science at the ALS. Packed into two busy days were 31 invited oral presentations and 80 submitted poster presentations, as well as time to visit 24 vendor booths. The oral sessions were dedicated to environmental science, chemical dynamics, biosciences, magnetic materials, and atomic and molecular science. In addition, there was an ALS highlights session that emphasized new results and a session comprising highlights from the young scientists who will carry the ALS into the future.

  8. 17th Annual ALS Users' Association Meeting

    SciTech Connect

    Robinson, Art; Tamura, Lori

    2004-11-29

    It's not exactly Russian roulette, but scheduling October events outdoors is not risk-free, even in usually sunny California. An overflow crowd of more than 400 registered users, ALS staff, and vendors enjoyed a full indoor program featuring science highlights and workshops spread over two and a half days from October 18 to October 20. However, a major storm, heralding the onset of the San Francisco Bay Area rainy season, posed a few weather challenges for the events on the ALS patio.

  9. Continuous germanene layer on Al(111).

    PubMed

    Derivaz, Mickael; Dentel, Didier; Stephan, Régis; Hanf, Marie-Christine; Mehdaoui, Ahmed; Sonnet, Philippe; Pirri, Carmelo

    2015-04-01

    Germanene, a 2D honeycomb structure similar to silicene, has been fabricated on Al(111). The 2D germanene layer covers uniformly the substrate with a large coherence over the Al(111) surface atomic plane. It is characterized by a (3 × 3) superstructure with respect to the substrate lattice, shown by low energy electron diffraction and scanning tunnelling microscopy. First-principles calculations indicate that the Ge atoms accommodate in a very regular atomic configuration with a buckled conformation. PMID:25802988

  10. Metastability in the MgAl2O4-Al2O3 System

    DOE PAGESBeta

    Wilkerson, Kelley R.; Smith, Jeffrey D.; Hemrick, James G.

    2014-07-22

    Aluminum oxide must take a spinel form ( γ-Al2O3) at elevated temperatures in order for extensive solid solution to form between MgAl2O4 and α-Al2O3. The solvus line between MgAl2O4 and Al2O3 has been defined at 79.6 wt% Al2O3 at 1500°C, 83.0 wt% Al2O3 at 1600°C, and 86.5 wt% Al2O3 at 1700°C. A metastable region has been defined at temperatures up to 1700°C which could have significant implications for material processing and properties. Additionally, initial processing could have major implications on final chemistry. The spinel solid solution region has been extended to form an infinite solid solution with Al2O3 at elevatedmore » temperatures. A minimum in melting at 1975°C and a chemistry of 96 wt% Al2O3 rather than a eutectic is present, resulting in no eutectic crystal formation during solidification.« less

  11. Next-generation sequencing of 28 ALS-related genes in a Japanese ALS cohort.

    PubMed

    Nakamura, Ryoichi; Sone, Jun; Atsuta, Naoki; Tohnai, Genki; Watanabe, Hazuki; Yokoi, Daichi; Nakatochi, Masahiro; Watanabe, Hirohisa; Ito, Mizuki; Senda, Jo; Katsuno, Masahisa; Tanaka, Fumiaki; Li, Yuanzhe; Izumi, Yuishin; Morita, Mitsuya; Taniguchi, Akira; Kano, Osamu; Oda, Masaya; Kuwabara, Satoshi; Abe, Koji; Aiba, Ikuko; Okamoto, Koichi; Mizoguchi, Kouichi; Hasegawa, Kazuko; Aoki, Masashi; Hattori, Nobutaka; Tsuji, Shoji; Nakashima, Kenji; Kaji, Ryuji; Sobue, Gen

    2016-03-01

    We investigated the frequency and contribution of variants of the 28 known amyotrophic lateral sclerosis (ALS)-related genes in Japanese ALS patients. We designed a multiplex, polymerase chain reaction-based primer panel to amplify the coding regions of the 28 ALS-related genes and sequenced DNA samples from 257 Japanese ALS patients using an Ion Torrent PGM sequencer. We also performed exome sequencing and identified variants of the 28 genes in an additional 251 ALS patients using an Illumina HiSeq 2000 platform. We identified the known ALS pathogenic variants and predicted the functional properties of novel nonsynonymous variants in silico. These variants were confirmed by Sanger sequencing. Known pathogenic variants were identified in 19 (48.7%) of the 39 familial ALS patients and 14 (3.0%) of the 469 sporadic ALS patients. Thirty-two sporadic ALS patients (6.8%) harbored 1 or 2 novel nonsynonymous variants of ALS-related genes that might be deleterious. This study reports the first extensive genetic screening of Japanese ALS patients. These findings are useful for developing genetic screening and counseling strategies for such patients.

  12. Magnetism in Fe4Al13 and related FeAl intermetallics

    NASA Astrophysics Data System (ADS)

    Chi, Ji; Li, Yang; Gou, Weiping; Goruganti, V.; Rathnayaka, K. D. D.; Ross, Joseph H., Jr.

    2006-03-01

    We report the results of an experimental study of FeAl alloys, including Fe4Al13, FeAl2 and Fe2Al5. By using NMR, dc magnetic susceptibility, and specific heat, we found that Fe4Al13 and Fe2Al5 are non-magnetic with some dilute magnetic moments, while FeAl2 can be characterized as a concentrated local moment system. Fe4Al13 is a decagonal quasicrystal approximant with 102 atoms in its unit cell. The ^27Al NMR spin-lattice relaxation indicates a very narrow pseudogap in the electronic density of states [g(E)] in the vicinity of the Fermi energy. The observations could be fit assuming a parabolic variation of g(E), consistent with observations in other quasicrystals and approximants. NMR lineshape measurements also agree with this analysis, and show that the system is dilute-magnetic, in strong contrast to the FeAl2 ordered intermetallic. We use specific heat to analyze the dilute moment density. This work was supported by the Robert A. Welch Foundation, Grant No. A-1526, by the National Science Foundation (DMR-0103455), and by Texas A&M University through the Telecommunications and Informatics Task Force.

  13. Thermodynamics and surface properties of liquid Al-Ga and Al-Ge alloys

    NASA Astrophysics Data System (ADS)

    Anusionwu, B. C.; Adebayo, G. A.; Madu, C. A.

    2009-11-01

    The surface properties of Al-Ga and Al-Ge liquid alloys have been theoretically investigated at a temperature of 1100 K and 1220 K respectively. For the Al-Ga system, the quasi chemical model for regular alloy and a model for phase segregating alloy systems were applied, while for the Al-Ge system the quasi chemical model for regular and compound forming binary alloys were applied. In the case of Al-Ga, the models for the regular alloys and that for the phase segregating alloys produced the same value of order energy and same values of thermodynamic and surface properties, while for the Al-Ge system, the model for the regular alloy reproduced better the thermodynamic properties of the alloy. The model for the compound forming systems showed a qualitative trend with the measured values of the thermodynamic properties of the Al-Ge alloy and suggests the presence of a weak complex of the form Al2Ge3. The surface concentrations for the alloys show that Ga manifests some level of surface segregation in Al-Ga liquid alloy while the surface concentration of Ge in Al-Ge liquid alloy showed a near Roultian behavior below 0.8 atomic fraction of Ge.

  14. Clinical trials for neuroprotection in ALS.

    PubMed

    Siciliano, G; Carlesi, C; Pasquali, L; Piazza, S; Pietracupa, S; Fornai, F; Ruggieri, S; Murri, L

    2010-07-01

    Owing to uncertainty on the pathogenic mechanisms underlying motor neuron degeneration in amyotrophic lateral sclerosis (ALS) riluzole remains the only available therapy, with only marginal effects on disease survival. Here we review some of the recent advances in the search for disease-modifying drugs for ALS based on their putative neuroprotective effetcs. A number of more or less established agents have recently been investigated also in ALS for their potential role in neuroprotection and relying on antiglutamatergic, antioxidant or antiapoptotic strategies. Among them Talampanel, beta-lactam antibiotics, Coenzyme Q10, and minocycline have been investigated. Progress has also been made in exploiting growth factors for the treatment of ALS, partly due to advances in developing effective delivery systems to the central nervous system. A number of new therapies have also been identified, including a novel class of compounds, such as heat-shock protein co-inducers, which upregulate cell stress responses, and agents promoting autophagy and mitochondriogenesis, such as lithium and rapamycin. More recently, alterations of mRNA processing were described as a pathogenic mechanism in genetically defined forms of ALS, as those related to TDP-43 and FUS-TLS gene mutations. This knowledge is expected to improve our understanding of the pathogenetic mechanism in ALS and developing more effective therapies. PMID:20406180

  15. Modeling of precipitation in Al alloys

    SciTech Connect

    Asta, M.; Foiles, S.M.; Wolfer, W.G.

    1996-10-01

    Objective was the development of a computational model of precipitation from a supersaturated alloy solid solution. The model is based on the formalism of chemical-reaction-rate theory combined with classical descriptions of precipitate thermodynamic properties and a mean-field treatment of diffusion-limited growht and coarsening. For the case of precipitation of Al{sub 3}Sc in supersaturated Al-Sc alloys, it is demonstrated how the model can be used to calculate number densities and size distributions of precipitates as a function of aging time and temperature, including effects of continuous cooling and thermally generated point defects. Application of the model to a specific alloy system requires knowledge of diffusion data, point defect energetics, and thermodynamic properties for bulk phases and interphase interfaces. For interfaces and point defects, thermodynamic data can be difficult to measure and reliable values of defect free energies are often unavailable. For this reason, part of the efforts were devoted to applying semiempirical and first-principles atomistic techniques to the calculation of interfacial and point-defect thermodynamic properties. This report discusses applications for interphase interfaces in the Al-Ag, Al-Sc, and Al-Li alloy systems. We also describe atomistic work aimed at understanding the energetics of vacancy clusters in Al. These clusters serve as sinks for isolated vacancies during aging and their growth can lead to more complex defects, such as dislocation loops, that act as heterogeneous nucleation sites.

  16. Visiting the Gödel universe.

    PubMed

    Grave, Frank; Buser, Michael

    2008-01-01

    Visualization of general relativity illustrates aspects of Einstein's insights into the curved nature of space and time to the expert as well as the layperson. One of the most interesting models which came up with Einstein's theory was developed by Kurt Gödel in 1949. The Gödel universe is a valid solution of Einstein's field equations, making it a possible physical description of our universe. It offers remarkable features like the existence of an optical horizon beyond which time travel is possible. Although we know that our universe is not a Gödel universe, it is interesting to visualize physical aspects of a world model resulting from a theory which is highly confirmed in scientific history. Standard techniques to adopt an egocentric point of view in a relativistic world model have shortcomings with respect to the time needed to render an image as well as difficulties in applying a direct illumination model. In this paper we want to face both issues to reduce the gap between common visualization standards and relativistic visualization. We will introduce two techniques to speed up recalculation of images by means of preprocessing and lookup tables and to increase image quality through a special optimization applicable to the Gödel universe. The first technique allows the physicist to understand the different effects of general relativity faster and better by generating images from existing datasets interactively. By using the intrinsic symmetries of Gödel's spacetime which are expressed by the Killing vector field, we are able to reduce the necessary calculations to simple cases using the second technique. This even makes it feasible to account for a direct illumination model during the rendering process. Although the presented methods are applied to Gödel's universe, they can also be extended to other manifolds, for example light propagation in moving dielectric media. Therefore, other areas of research can benefit from these generic improvements. PMID

  17. Calidad de Imagen del Telescopio UNAM212

    NASA Astrophysics Data System (ADS)

    Cobos, F. J.; Teiada de Vargas, C.

    1987-05-01

    El telescopio UNAM2l2, del Observatorio Astronómico Nacional, situado en la Sierra de San Pedro Mártir (Baja California, México), cumplira en un futuro muy cercano siete años de uso para fines de investigación astronómica. Aunque en este tiempo no se ha efectuado un estudio sistemático acerca de su comportamiento óptico y de los factores que influyen en la calidad de las imágenes, se han realizado pruebas diversas, estudios parciales y reuniones especificas, cuyos resultados no siempre se han difundido ampliamente y generalmente no se han presentado por escrito. Es por ello que hemos creido necesario intentar una recopilación de la información existente para poder con ella establecer un diagnóstjco que, aunque no sea definitivo, sirva de base para futuros trabajos tendientes a optimizar el comportamiento óptico del telescopio. Es evidente que un buen número de las conclusiones que se presentan son resultado del trabajo de muchas personas ó de esfuerzos colectivos. Asimismo, hemos tratado de localizar información bibliográfica que pueda ser de utilidad. Nuestro objetivo primordial ha consistido en centrarnos en la óptica del telescopio y su calidad, pero también se han considerado otros aspectos que puedan afectar las imágenes obtenidas tales como: celda del primario, `seeing' local y externo, flexiones posibles en la estructura mecánica del telescopio, etc.

  18. Visiting the Gödel universe.

    PubMed

    Grave, Frank; Buser, Michael

    2008-01-01

    Visualization of general relativity illustrates aspects of Einstein's insights into the curved nature of space and time to the expert as well as the layperson. One of the most interesting models which came up with Einstein's theory was developed by Kurt Gödel in 1949. The Gödel universe is a valid solution of Einstein's field equations, making it a possible physical description of our universe. It offers remarkable features like the existence of an optical horizon beyond which time travel is possible. Although we know that our universe is not a Gödel universe, it is interesting to visualize physical aspects of a world model resulting from a theory which is highly confirmed in scientific history. Standard techniques to adopt an egocentric point of view in a relativistic world model have shortcomings with respect to the time needed to render an image as well as difficulties in applying a direct illumination model. In this paper we want to face both issues to reduce the gap between common visualization standards and relativistic visualization. We will introduce two techniques to speed up recalculation of images by means of preprocessing and lookup tables and to increase image quality through a special optimization applicable to the Gödel universe. The first technique allows the physicist to understand the different effects of general relativity faster and better by generating images from existing datasets interactively. By using the intrinsic symmetries of Gödel's spacetime which are expressed by the Killing vector field, we are able to reduce the necessary calculations to simple cases using the second technique. This even makes it feasible to account for a direct illumination model during the rendering process. Although the presented methods are applied to Gödel's universe, they can also be extended to other manifolds, for example light propagation in moving dielectric media. Therefore, other areas of research can benefit from these generic improvements.

  19. Radio-Observaciones del OH EN la Coma del Cometa Halley Desde EL Hemisferio Sur

    NASA Astrophysics Data System (ADS)

    Silva, A. M.; Bajaja, E.; Morras, R.; Cersosimo, J. C.; Martin, M. C.; Arnal, E. M.; Poppel, W. G. L.; Colomb, F. R.; Mazzaro, J.; Olalde, J. C.; Boriakoff, V.; Mirabel, I. F.

    1987-05-01

    Se utilizó una antena de 30 metros del Instituto Argentino de Radioastronomía para observaciones diarias Cf ebrero a abril de 1986) de la transición en 1667 MHz ( λ = 18 cm) del OH en la coma del cometa Halley. De las observaciones realizadas se concluye: 1) El número promedio de moléculas de OH en la coma durante 37 días de observación fue de (8.9±3.5)x1034 moléculas, lo que implica una tasa de producción promedio de OH de 1.8x1029 moléculas seg-1 y consecuentemente una pérdida de masa promedio de 17±6 toneladas seg-1 . Este valor está de acuerdo con las mediciones realizadas por las sondas Vega y Giotto. 2) El monitoreo desde el lAR revela la existencia de variaciones bruscas en los flujos de absorción del OH. Estas variaciones son consistentes con los modelos que representan la producción gaseosa a partir de ejecciones y/o desprendimientos discretos de materia congelada del núcleo. 3) Las variaciones en la densidad de flujo son consistentes con las estimaciones de los tiem- pos de vida medios del H2O y del OH en presencia del campo de radiación solar. 4) Se encuentra una correlación entre la intensidad del flujo absorbido y anisotropías en Ia dinamica de la coma.

  20. [Revista de Gastroenterologia del Peru: 25 years].

    PubMed

    Celestino Fernández, Alvaro

    2005-01-01

    In this article is described in a very summarized form the history of the Revista de Gastroenterología del Perú (RGP) that dates from the same origins of the Sociedad de Gastroenterología del Perú, when based in October 30 of 1952 already glimpse the presence of the RGP as the official organ for the publication for studies of doctors of the society or foreign guests. We spent 29 years, and this idea becomes reality; and today the RGP turns to their XXV anniversary. The RGP, to locate itself as the Peruvian medical publication best reputation.

  1. Kinetic Monte Carlo of transport processes in Al/AlOx/Au-layers: Impact of defects

    NASA Astrophysics Data System (ADS)

    Weiler, Benedikt; Haeberle, Tobias; Gagliardi, Alessio; Lugli, Paolo

    2016-09-01

    Ultrathin films of alumina were investigated by a compact kMC-model. Experimental jV-curves from Al/AlOx/Au-junctions with plasma- and thermal-grown AlOx were fitted by simulated ones. We found dominant defects at 2.3-2.5 eV below CBM for AlOx with an effective mass mox ∗= 0.35 m0 and a barrier EB ,A l /A l O x≈2.8 eV in agreement with literature. The parameterization is extended to varying defect levels, defect densities, injection barriers, effective masses and the thickness of AlOx. Thus, dominant charge transport processes and implications on the relevance of defects are derived and AlOx parameters are specified which are detrimental for the operation of devices.

  2. Theoretical studies of Ni/sub 3/Al and NiAl with impurities

    SciTech Connect

    Chen, S.P.; Voter, A.F.; Boring, A.M.; Albers, R.C.; Hay, P.J.

    1988-01-01

    Intermetallic compound has been extensively studied because of their superior properties in strength, low creep rate, and high melting point. But most of the systems have room temperature ductility problems, like Ll/sub 2/ and B2 compounds. Both Ll/sub 2/ Ni/sub 3/Al and B2 NiAl exhibit intergranular fracture mode. Understanding grain boundaries in these materials is of particular importance since intergranular fracture limits the applicability of these otherwise promising material. In an effort trying to understand the fracture mechanism, we have used embedded atom potentials to study the properties of Ni/sub 3/Al and NiAl. We also consider the effect of boron, sulfur, and nickel segregation on the strength of grain boundaries in Ni/sub 3/Al and NiAl. 22 refs., 2 figs.

  3. Scattering induced by Al segregation in AlGaN/GaN heterostructures

    SciTech Connect

    Liu, Xiwen; Lu, Yanwu; Ji, Dong

    2015-08-17

    The effect of Al segregation near dislocations on the mobility of two-dimensional electron gas in AlGaN/GaN heterostructure-based high-electron-mobility transistors was investigated. Exponentially varied composition fluctuation was effective in describing Al segregation near dislocations when calculating scattering behavior. Mobility, which was limited by Al segregation surrounding dislocation lines, was calculated to be in the order of 10{sup 3} cm{sup 2}/Vs to 10{sup 6} cm{sup 2}/Vs. Results indicated that the mobility in AlGaN/GaN heterojunction was enhanced upon the reduction of dislocation density at low temperature. This study contributes to generating higher electron mobility in AlGaN/GaN heterojunctions.

  4. Microscopic Properties of Long-Period Ordering in Al-Rich TiAl Alloys

    NASA Astrophysics Data System (ADS)

    Hata, S.; Nakano, T.; Kuwano, N.; Itakura, M.; Matsumura, S.; Umakoshi, Y.

    2008-07-01

    The ordering mechanism of long-period superstructures (LPSs) in Al-rich TiAl alloys has been investigated by high-resolution transmission electron microscopy (HRTEM). The LPSs are classified in terms of arrangements of base clusters with different shapes and compositions formed in Ti-rich (002) layers of L10-TiAl matrix: square Ti4Al, fat rhombus Ti3Al, and lean rhombus Ti2Al type clusters. The HRTEM observations revealed that antiphase boundaries of long-range-ordered LPS domains and short-range-ordered microdomains are constructed by various space-filling arrangements of the base clusters. Such a microscopic property characterized by the base clusters and their arrangements is markedly analogous to that of the {left< {{text{1,1/2,0}}} rightrangle } * special-point ordering alloys such as Ni-Mo.

  5. Remarks on Peinado et al.'s Analysis of J3Gen

    PubMed Central

    Garcia-Alfaro, Joaquin; Herrera-Joancomartí, Jordi; Melià-Seguí, Joan

    2015-01-01

    Peinado et al. analyzed the security of the J3Gen pseudorandom number generator proposed by Melià-Seguí et al., and claimed weaknesses regarding its security properties. They also presented a deterministic attack based on the decimation of the J3Gen output sequences. We show that the assumptions made by Peinado et al. are not correct and that the proposed deterministic attack against J3Gen does not hold in practice. PMID:25781510

  6. Two-Phase (TiAl+TiCrAl) Coating Alloys for Titanium Aluminides

    NASA Technical Reports Server (NTRS)

    Brady, Michael P. (Inventor); Smialek, James L. (Inventor); Brindley, William J. (Inventor)

    1998-01-01

    A coating for protecting titanium aluminide alloys, including the TiAl gamma + Ti3Al (alpha(sub 2)) class, from oxidative attack and interstitial embrittlement at temperatures up to at least 1000 C. is disclosed. This protective coating consists essentially of titanium, aluminum. and chromium in the following approximate atomic ratio: Ti(41.5-34.5)Al(49-53)Cr(9.5-12.5)

  7. Temperature dependence diode parameters studies of Al/CuPc/n-Si/Al structure

    NASA Astrophysics Data System (ADS)

    Kumar, Ratnesh; Kaur, Ramneek; Sharma, Mamta; Kaur, Maninder; Tripathi, S. K.

    2015-08-01

    This paper presents the fabrication of Al/CuPc/n-Si/Al metal-organic-semiconductor diode. The copper phthalocyanine as organic layer is deposited on Si substrate by thermal evaporation technique. The temperature dependent current-voltage measurements are performed on Al/CuPc/n-Si structure. The important diode parameters i.e. the barrier height and ideality factor have been calculated. The temperature dependence of barrier height and ideality factor has been studied.

  8. The lowest ionization potentials of Al2

    NASA Technical Reports Server (NTRS)

    Bauschlicher, Charles W., Jr.; Barnes, Leslie A.; Taylor, Peter R.

    1988-01-01

    Potential curves for the lowest two electronic states (X 2 sigma g + and A 2 pi u) of Al2(+) were computed using complete active space SCF/multireference CI wave functions and large Gaussian basis sets. The lowest observable vertical ionization potential (to Al2(+) X 2 sigma g +) of the Al2 X 3 pi u ground state is calculated to occur around 6.1 eV, in excellent agreement with the experimental range of 6.0 to 6.42 eV obtained in recent cluster ionization studies by Cox and co-workers. The second vertical ionization potential (to Al2(+) A 2 pi u) occurs near 6.4 eV, also within the experimental range. The adiabatic IP of 5.90 eV is in good agreement with the value of 5.8 to 6.1 eV deduced by Hanley and co-workers from the difference in thresholds between collision induced dissociation processes of Al3(+). The computed IP values are somewhat larger than those deduced from branching ratios in cluster fragmentation experiments by Jarrold and co-workers. The observation of an ionization threshold below 6.42 eV is shown to be incompatible with an Al2 ground electronic state assignment of 3 sigma g -, but the separation between the two lowest states of Al2 is so small that it is likely that both are populated in the experiments, so that this does not provide unambiguous support for the recent theoretical assignment of the ground state as 3 pi u.

  9. Chemical trend of superconducting transition temperature in hole-doped delafossite of CuAlO2, AgAlO2 and AuAlO2

    NASA Astrophysics Data System (ADS)

    Nakanishi, Akitaka; Katayama-Yoshida, Hiroshi

    2012-12-01

    We have performed the first-principles calculations about the superconducting transition temperature Tc of hole-doped delafossite CuAlO2, AgAlO2 and AuAlO2. Calculated Tc are about 50 K (CuAlO2), 40 K (AgAlO2) and 3 K(AuAlO2) at maximum in the optimum hole-doping concentration. The low Tc of AuAlO2 is attributed to the weak electron-phonon interaction caused by the low covalency and heavy atomic mass.

  10. High temperature deformation of NiAl and CoAl

    NASA Technical Reports Server (NTRS)

    Nix, W. D.

    1982-01-01

    The high temperature mechanical properties of the aluminides are reviewed with respect to their potential as high temperature structural materials. It is shown that NiAl and CoAl are substantially stronger than the pure metals Ni and Co at high temperatures and approach the strength of some superalloys, particularly when those superalloys are tested in "weak" directions. The factors that limit and control the high temperature strengths of NiAl and CoAl are examined to provide a basis for the development of intermetallic alloys of this type.

  11. Small Al clusters. II - Structure and binding in Al(n) (n = 2-6, 13)

    NASA Technical Reports Server (NTRS)

    Pettersson, Lars G. M.; Bauschlicher, Charles W., Jr.; Halicioglu, Timur

    1987-01-01

    The structure and stability of aluminum clusters containing up to six atoms have been studied using correlated wave functions and extended basis sets. The lowest energy structure is planar for Al4 and Al5, but three dimensional for Al6. The icosahedral, hcp, fcc, and two planar structures of Al13 were considered at the SCF level. The lowest energy structure is the icosahedron, but the planar structures are fairly low lying even in this case. A simplified description using two- and three-body interaction potentials is found to agree well with the ab initio structures and binding energies.

  12. Synthesis of core–shell AlOOH hollow nanospheres by reacting Al nanoparticles with water

    NASA Astrophysics Data System (ADS)

    Lozhkomoev, A. S.; Glazkova, E. A.; Bakina, O. V.; Lerner, M. I.; Gotman, I.; Gutmanas, E. Y.; Kazantsev, S. O.; Psakhie, S. G.

    2016-05-01

    A novel route for the synthesis of boehmite nanospheres with a hollow core and the shell composed of highly crumpled AlOOH nanosheets by oxidizing Al nanopowder in pure water under mild processing conditions is described. The stepwise events of Al transformation into boehmite are followed by monitoring the pH in the reaction medium. A mechanism of formation of hollow AlOOH nanospheres with a well-defined shape and crystallinity is proposed which includes the hydration of the Al oxide passivation layer, local corrosion of metallic Al accompanied by hydrogen evolution, the rupture of the protective layer, the dissolution of Al from the particle interior and the deposition of AlOOH nanosheets on the outer surface. In contrast to previously reported methods of boehmite nanoparticle synthesis, the proposed method is simple, and environmentally friendly and allows the generation of hydrogen gas as a by-product. Due to their high surface area and high, slit-shaped nanoporosity, the synthesized AlOOH nanostructures hold promise for the development of more effective catalysts, adsorbents, vaccines and drug carriers.

  13. Elastic and piezoelectric properties of AlN and LiAlO2 single crystals.

    PubMed

    Sotnikov, Andrey; Schmidt, Hagen; Weihnacht, Manfred; Smirnova, Elena; Chemekova, Tatiana; Makarov, Yuri

    2010-04-01

    We have successfully grown high-quality AlN piezoelectric single crystal using the sublimation technique. Transparent crack-free boules of approximately 15 mm in diameter and 25 mm in length along the [0001] direction were obtained, with coloring from amber to dark brown depending on growth temperature. Full sets of material parameters of grown AlN and commercially available LiAlO(2) bulk crystals were measured at room temperature. Temperature coefficients of the material parameters of LiAlO(2) were also obtained in a temperature range from -70 to +50 degrees C.

  14. Synthesis of core-shell AlOOH hollow nanospheres by reacting Al nanoparticles with water

    NASA Astrophysics Data System (ADS)

    Lozhkomoev, A. S.; Glazkova, E. A.; Bakina, O. V.; Lerner, M. I.; Gotman, I.; Gutmanas, E. Y.; Kazantsev, S. O.; Psakhie, S. G.

    2016-05-01

    A novel route for the synthesis of boehmite nanospheres with a hollow core and the shell composed of highly crumpled AlOOH nanosheets by oxidizing Al nanopowder in pure water under mild processing conditions is described. The stepwise events of Al transformation into boehmite are followed by monitoring the pH in the reaction medium. A mechanism of formation of hollow AlOOH nanospheres with a well-defined shape and crystallinity is proposed which includes the hydration of the Al oxide passivation layer, local corrosion of metallic Al accompanied by hydrogen evolution, the rupture of the protective layer, the dissolution of Al from the particle interior and the deposition of AlOOH nanosheets on the outer surface. In contrast to previously reported methods of boehmite nanoparticle synthesis, the proposed method is simple, and environmentally friendly and allows the generation of hydrogen gas as a by-product. Due to their high surface area and high, slit-shaped nanoporosity, the synthesized AlOOH nanostructures hold promise for the development of more effective catalysts, adsorbents, vaccines and drug carriers.

  15. Synthesis of core-shell AlOOH hollow nanospheres by reacting Al nanoparticles with water.

    PubMed

    Lozhkomoev, A S; Glazkova, E A; Bakina, O V; Lerner, M I; Gotman, I; Gutmanas, E Y; Kazantsev, S O; Psakhie, S G

    2016-05-20

    A novel route for the synthesis of boehmite nanospheres with a hollow core and the shell composed of highly crumpled AlOOH nanosheets by oxidizing Al nanopowder in pure water under mild processing conditions is described. The stepwise events of Al transformation into boehmite are followed by monitoring the pH in the reaction medium. A mechanism of formation of hollow AlOOH nanospheres with a well-defined shape and crystallinity is proposed which includes the hydration of the Al oxide passivation layer, local corrosion of metallic Al accompanied by hydrogen evolution, the rupture of the protective layer, the dissolution of Al from the particle interior and the deposition of AlOOH nanosheets on the outer surface. In contrast to previously reported methods of boehmite nanoparticle synthesis, the proposed method is simple, and environmentally friendly and allows the generation of hydrogen gas as a by-product. Due to their high surface area and high, slit-shaped nanoporosity, the synthesized AlOOH nanostructures hold promise for the development of more effective catalysts, adsorbents, vaccines and drug carriers. PMID:27053603

  16. Al-matrix composite materials reinforced by Al-Cu-Fe particles

    NASA Astrophysics Data System (ADS)

    Bonneville, J.; Laplanche, G.; Joulain, A.; Gauthier-Brunet, V.; Dubois, S.

    2010-07-01

    Al-matrix material composites were produced using hot isostatic pressing technique, starting with pure Al and icosahedral (i) Al-Cu-Fe powders. Depending on the processing temperature, the final reinforcement particles are either still of the initial i-phase or transformed into the tetragonal ω-Al00.70Cu0.20Fe0.10 crystalline phase. Compression tests performed in the temperature range 293K - 823K on the two types of composite, i.e. Al/i and Al/ω, indicate that the flow stress of both composites is strongly temperature dependent and exhibit distinct regimes with increasing temperature. Differences exist between the two composites, in particul ar in yield stress values. In the low temperatureregime (T <= 570K), the yield stress of the Al/ω composite is nearly 75% higher than that of the Al/i composite, while for T > 570K both composites exhibit similar yield stress values. The results are interpreted in terms of load transfer contribution between the matrix and the reinforcement particles and elementary dislocation mechanisms in the Al matrix.

  17. A Precambrian cratonic block in the west-central Chihuahua - The Sierra del Nido cratonic block

    SciTech Connect

    Goodell, P.C. . Dept. of Geological)

    1993-02-01

    Precambrian rocks in west-central Chihuahua have been recognized by Denison (1969) and Mauger et al. (1983), on the basis of radiometric dating. The rocks are rhyolite clasts, and an allucthonous block, respectively, however their source direction and vergence can be measured. They point back to and are on the edge of a large, uniform, negative Bouguer gravity anomaly, having values greater than 200 milligals. The isotopic geochemical character of several Tertiary felsic fields within this anomalous are has been determined, and initial strontium isotopic ratios are all greater than 0.7055. Outside the anomalous area these ratios are lower, and Basin and Range extension tectonism is more evident. It is proposed that a Precambrian cratonic block, the Sierra del Nido, is present in the crust in west-central Chihuahua. It is reasonable to propose that it was decreted from North America during a Precambrian extensional (1.1. By ) event, from somewhere along the Arizona Transition Zone-Texas Linament region. The Sierra del Nido Block is separated form the ATZ-TL by a region of disrupted craton and extended crust, the Basin and Range Province. Implications of the pressure of the Sierra del Nido Block on other regional tectonic events will be discussed.

  18. The new structure type Gd3Ni7Al14.

    PubMed

    Pukas, Svitlana; Gladyshevskii, Roman

    2015-11-01

    The crystal structure of Gd3Ni7Al14 (trigadolinium heptanickel tetradecaaluminide) belongs to a family of two-layer structures and can be described as an assembly of interpenetrating centred straight prisms. For the Ni atoms, trigonal prisms (Al4Gd2 and Al6) are observed, the Al atoms are inside tetragonal (Ni2Al2Gd4, Ni2Al4Gd2, Al4Gd4, Ni4Al4 and Al8) and pentagonal (Ni4Al6 and Al10) prisms, while the Gd atoms are at the centres of pentagonal (Ni4Al6) and hexagonal (Ni4Al8) prisms. In each case, the true coordination polyhedron is a capped prism, also including atoms from the same layer. The structural features of Gd3Ni7Al14 are similar to those of the intermetallides PrNi2Al3 and ZrNiAl. In all these structures, Ni-centred trigonal prisms form infinite columns via common triangular faces. The columns share prism edges and form a three-dimensional framework with six-membered rings in the (001) plane in the case of the PrNi2Al3 and ZrNiAl types. In the case of Gd3Ni7Al14, six-membered rings are also observed, but only two-thirds of the rings are interconnected via prism edges. PMID:26524174

  19. The new structure type Gd3Ni7Al14.

    PubMed

    Pukas, Svitlana; Gladyshevskii, Roman

    2015-11-01

    The crystal structure of Gd3Ni7Al14 (trigadolinium heptanickel tetradecaaluminide) belongs to a family of two-layer structures and can be described as an assembly of interpenetrating centred straight prisms. For the Ni atoms, trigonal prisms (Al4Gd2 and Al6) are observed, the Al atoms are inside tetragonal (Ni2Al2Gd4, Ni2Al4Gd2, Al4Gd4, Ni4Al4 and Al8) and pentagonal (Ni4Al6 and Al10) prisms, while the Gd atoms are at the centres of pentagonal (Ni4Al6) and hexagonal (Ni4Al8) prisms. In each case, the true coordination polyhedron is a capped prism, also including atoms from the same layer. The structural features of Gd3Ni7Al14 are similar to those of the intermetallides PrNi2Al3 and ZrNiAl. In all these structures, Ni-centred trigonal prisms form infinite columns via common triangular faces. The columns share prism edges and form a three-dimensional framework with six-membered rings in the (001) plane in the case of the PrNi2Al3 and ZrNiAl types. In the case of Gd3Ni7Al14, six-membered rings are also observed, but only two-thirds of the rings are interconnected via prism edges.

  20. 33 CFR 80.1118 - Marina Del Rey, CA.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Marina Del Rey, CA. 80.1118 Section 80.1118 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY INTERNATIONAL NAVIGATION RULES COLREGS DEMARCATION LINES Pacific Coast § 80.1118 Marina Del Rey, CA. (a) A line drawn from Marina Del Rey Breakwater South Light...

  1. Evidence that 26Al Did Not Melt Asteroids

    NASA Astrophysics Data System (ADS)

    Wasson, J. T.

    2016-08-01

    26Al/27Al initial ratios in achondrites are much lower than expected if 26Al was the only heat source responsible for melting the parental materials. Impacts provided a substantial fraction of the heat.

  2. Pliocene Transgression in the Western Mediterranean Sea: Strontium Isotopes from Cuevas Del Almanzora (Se Spain)

    NASA Astrophysics Data System (ADS)

    Müller, Daniel W.

    1993-02-01

    The deposition of marine sediments in the deep Mediterranean basins following the Messinian salinity crisis ("Zanclean Deluge") began at 4.9 Ma and continued until normal marine conditions prevailed at 4.6 Ma. The Betic Strait of southeast Spain, the Rif Strait of northern Morocco, and the Strait of Gibraltar have been postulated as possible entry ways for the marine waters into the Mediterranean. Two possible explanations have been offered for the timing of the deposition of marine hemipelagic marls in the Vera Basin (Cuevas del Almanzora section) within the Betic Strait: (1) early Pliocene, representing the "Zanclean Deluge" (Cita et al., 1980), (2) Messinian (˜5.7 Ma), representing the last marine stage before the Messinian salinity crisis (Benson and Rakic-El Bied, 1991; Benson et al., 1991). The strontium isotopic ratio on mixed assemblages of foraminifers from these marine marls was determined in order to assess their ages. The average 87Sr/86Sr (0.709033±24) of the seven measured samples is, compared to the base of the Miocene/Pliocene boundary stratotype at Capo Rossello, Sicily, higher by 38 × 10-6 and yields an age of 4.6±0.5 Ma when compared to the established open ocean Sr seawater curve. The determined age indicates that (1) the first 3.6 m of marine deposits of the Cuevas del Almanzora section sensu Cita et al. (1980) including the passage zone are Pliocene, (2) the earliest marine Pliocene might not be represented at Cuevas del Almanzora indicating that this marginal basin at the edge of the Mediterranean Sea, yet within the former Betic Strait, was filled progressively by a marine transgression originating from the Mediterranean Sea around 4.6 Ma. The absence of lowermost Pliocene sediments could suggest that the Betic Strait did not serve as a conduit for the water masses entering the Mediterranean basins during the early Pliocene; and (3) the presence of an early evolutionary stage of Globorotalia margaritae in the Moroccan Bou Regreg section

  3. Vigilando la Calidad del Agua de los Grandes Rios de la Nacion: El Programa NASQAN del Rio Grande (Rio Bravo del Norte)

    USGS Publications Warehouse

    Lurry, Dee L.; Reutter, David C.; Wells, Frank C.; Rivera, M.C.; Munoz, A.

    1998-01-01

    La Oficina del Estudio Geologico de los Estados Unidos (U.S. Geological Survey, 0 USGS) ha monitoreado la calidad del agua de la cuenca del Rio Grande (Rio Bravo del Norte) desde 1995 como parte de la rediseiiada Red Nacional para Contabilizar la Calidad del Agua de los Rios (National Stream Quality Accounting Network, o NASOAN) (Hooper and others, 1997). EI programa NASOAN fue diseiiado para caracterizar las concentraciones y el transporte de sedimento y constituyentes quimicos seleccionados, encontrados en los grandes rios de los Estados Unidos - incluyendo el Misisipi, el Colorado y el Columbia, ademas del Rio Grande. En estas cuatro cuencas, el USGS opera actualmente (1998) una red de 40 puntos de muestreo pertenecientes a NASOAN, con un enfasis en cuantificar el flujo en masa (la cantidad de material que pasa por la estacion, expresado en toneladas por dial para cada constituyente. Aplicacando un enfoque consistente, basado en la cuantificacion de flujos en la cuenca del Rio Grande, el programa NASOAN esta generando la informacion necesaria para identificar fuentes regionales de diversos contaminantes, incluyendo sustancias qui micas agricolas y trazas elementos en la cuenca. EI efecto de las grandes reservas en el Rio Grande se puede observar segun los flujos de constituyentes discurren a 10 largo del rio. EI analisis de los flujos de constituyentes a escala de la cuenca proveera los medios para evaluar la influencia de la actividad humana sobre las condiciones de calidad del agua del Rio Grande.

  4. Exothermic reactions in Co/Al nanolaminates

    NASA Astrophysics Data System (ADS)

    Adams, D. P.; Hodges, V. C.; Bai, M. M.; Jones, E.; Rodriguez, M. A.; Buchheit, T.; Moore, J. J.

    2008-08-01

    Vapor-deposited Co/Al nanolaminates having a net equiatomic stoichiometry exhibited rapid, high-temperature synthesis. When ignited locally, 7.5-μm-thick Co/Al foils were characterized by self-sustained propagating reactions with flame front speeds between ˜0.5 and 9 m/s. Speed was largely affected by bilayer thickness and premixed volume fraction, consistent with previous studies of other exothermic multilayers. Cobalt aluminide foils reacted by self-propagating synthesis developed a variety of rough surface morphologies characterized by a large amplitude (peak-to-valley ˜1.0 μm), multiperiod, wavelike structure. High-temperature reaction was also stimulated by rapid global heating. Tests revealed low ignition temperatures (Tig)˜240-460 °C compared with previous Co-Al powder reactant experiments. Ignition temperature was influenced by bilayer thickness. All foils ignited by global heating and those reacted in a self-propagating mode developed a single-phase B2 (CsCl-type) crystal structure. Thick Co/Al nanolaminates were used successfully to join a few different materials including metalized Al2O3 (by soldering) and polyetheretherketone (by direct attachment).

  5. Evaporación dinámica del cinturón de asteroides original

    NASA Astrophysics Data System (ADS)

    Brunini, A.

    Hemos integrado numéricamente un enjambre de 3000 partículas en la región del cinturón de asteroides, sujetas a las perturbaciones gravitatorias de Júpiter y Saturno. Al cabo de 107 años, se han formado ya todos los gaps de Kirkwood observados en el cinturón actual. El grupo en la resonancia 3/2 es, aunque en menor grado, también visible. Los tiempos de Lyapunov computados para los asteroides sobrevivientes, nos ha permitido encontrar la fracción de ellos que es capaz de sobrevivir por toda la edad del sistema solar, merced a la aplicacion de la relación empírica que vincula dichos tiempos al tiempo en el cual se manifiestan grandes transiciones orbitales. La fracción de supervivientes es de aproximadamente 1/100. El resto de la masa faltante en el cinturón, es atribuible a colisiones catastróficas con cometas en etapas primordiales.

  6. The Torres del Paine intrusion as a model for a shallow magma chamber

    NASA Astrophysics Data System (ADS)

    Baumgartner, Lukas; Bodner, Robert; Leuthold, Julien; Muntener, Othmar; Putlitz, Benita; Vennemann, Torsten

    2014-05-01

    The shallow magmatic Torres del Paine Intrusive Complex (TPIC) belongs to a series of sub-volcanic and plutonic igneous bodies in Southern Chile and Argentina. This trench-parallel belt is located in a transitional position between the Patagonia Batholith in the West, and the alkaline Cenozoic plateau lavas in the East. While volumetrically small amounts of magmatism started around 28 my ago in the Torres del Paine area, and a second period occurred between 17-16 Ma, it peaked with the TPIC 12.59-12.43 Ma ago. The spectacular cliffs of the Torres del Paine National park provide a unique opportunity to study the evolution of a very shallow magma chamber and the interaction with its host rocks. Intrusion depth can be estimated based on contact metamorphic assemblages and granite solidus thermobarometry to 750±250 bars, corresponding to an intrusion depth of ca. 3km, ca. 500m above the base of the intrusion. Hornblende thermobarometry in mafic rocks agrees well with these estimates (Leuthold et al., 2014). The TPIC is composed of a granitic laccolith emplaced over 90ka (Michel et al., 2008) in 3 major, several 100m thick sheets, forming an overall thickness of nearly 2 km. Contacts are sharp between sheets, with the oldest sheet on the top and the youngest on the bottom (Michel et al., 2008). The granitic laccolith is under-plated by a ca. 400m thick mafic laccolith, built up over ca. 50ka (Leuthold et al. 2012), constructed from the bottom up. Granitic and mafic sheets are themselves composed of multiple metric to decametric pulses, mostly with ductile contacts between them, resulting in outcrop patterns resembling braided stream sediments. The contact of the TPIC with the Cretaceous flysch sediments document intrusion mechanism. Pre-existing sub-horizontal fold axes are rotated in the roof of the TPIC, clearly demonstrating ballooning of the roof; no ballooning was observed in the footwall of the intrusion. Extension during ballooning of the roof is indicated by

  7. Hopeful (protein InDel) monsters?

    PubMed

    Tóth-Petróczy, Agnes; Tawfik, Dan S

    2014-06-10

    In this issue of Structure, Arpino and colleagues describe in atomic detail how a protein stomachs a deletion within a helix, an event that rarely occurs in nature or in the lab. Can insertions and deletions (InDels) trigger dramatic structural transitions?

  8. Near Infrared Photometry of Nova Del 2013

    NASA Astrophysics Data System (ADS)

    Cass, A. C.; Carlon, R. L.; Corgan, D. T.; Dykhoff, D. A.; Gehrz, R. D.; Shenoy, D. P.

    2013-09-01

    We continued to follow Nova Del 2013 during the period from 31.15 August 2013 UT through 25.18 September 2013 UT using an As:Si bolometer mounted on the 0.76-m infrared telescope of the University of Minnesota's O'Brien Observatory (Marine on St. Croix, Minnesota, USA). Vega (alpha Lyrae) is used as the standard star.

  9. del and Gödel-type universes in Brans-Dicke theory

    NASA Astrophysics Data System (ADS)

    Agudelo, J. A.; Nascimento, J. R.; Petrov, A. Yu.; Porfírio, P. J.; Santos, A. F.

    2016-11-01

    In this paper, conditions for existence of Gödel and Gödel-type solutions in Brans-Dicke (BD) scalar-tensor theory and their main features are studied. The consistency of equations of motion, causality violation and existence of CTCs (closed time-like curves) are investigated. The role which cosmological constant and Mach principle play to achieve the consistency of this model is studied.

  10. [I costi farmacologici della terapia di conversione con farmaci biologici nel carcinoma del colon-retto con metastasi epatiche].

    PubMed

    Giuliani, Jacopo; Bonetti, Andrea

    2016-08-01

    Riassunto. Lo scopo di questo studio è quello di valutare i costi dei farmaci (con particolare riferimento alle terapie con farmaci biologici) utilizzati nella terapia di conversione in una popolazione non selezionata di pazienti affetti da carcinoma del colon-retto in stadio avanzato, al fine di ottenere una resezione epatica R0. In questa rassegna sono stati selezionati i report completi e gli aggiornamenti di tutti gli studi clinici randomizzati (di fase II e fase III) che confrontassero almeno 2 regimi di terapia con farmaci biologici in prima linea in pazienti affetti da carcinoma del colon-retto in stadio avanzato di malattia. I costi dei farmaci sono stati ricavati dalla nostra Farmacia Ospedaliera e sono espressi in euro (€). Il nostro studio inizia con la valutazione di 683 abstract. 48 tria sono stati considerati adeguati per una successiva analisi. Una valutazione più approfondita ha portato all'esclusione di 37 trial, lasciando alla valutazione finale 11 studi clinici randomizzati (3 trial di fase II, per un totale di 522 pazienti, e 8 studi di fase III, per un totale di 7191 pazienti). I costi dei farmaci utilizzati nella terapia di conversione aumentano con la sostituzione del 5-fluorouracile con la capecitabina e, in misura maggiore, con l'introduzione degli agenti biologici. In questo lavoro sono presentati due punti chiave. Primo, i costi degli agenti farmacologici utilizzati nei regimi di prima linea a base di agenti biologici più comunemente utilizzati nel trattamento del carcinoma del colon-retto in stadio avanzato sono molto variabili. Secondo, i dati di efficacia dei regimi pubblicati, in termini di tassi di resezione, dipendono dalla selezione dei pazienti, dalle caratteristiche del tumore e dal tipo di schema di terapia.

  11. [I costi farmacologici della terapia di conversione con farmaci biologici nel carcinoma del colon-retto con metastasi epatiche].

    PubMed

    Giuliani, Jacopo; Bonetti, Andrea

    2016-08-01

    Riassunto. Lo scopo di questo studio è quello di valutare i costi dei farmaci (con particolare riferimento alle terapie con farmaci biologici) utilizzati nella terapia di conversione in una popolazione non selezionata di pazienti affetti da carcinoma del colon-retto in stadio avanzato, al fine di ottenere una resezione epatica R0. In questa rassegna sono stati selezionati i report completi e gli aggiornamenti di tutti gli studi clinici randomizzati (di fase II e fase III) che confrontassero almeno 2 regimi di terapia con farmaci biologici in prima linea in pazienti affetti da carcinoma del colon-retto in stadio avanzato di malattia. I costi dei farmaci sono stati ricavati dalla nostra Farmacia Ospedaliera e sono espressi in euro (€). Il nostro studio inizia con la valutazione di 683 abstract. 48 tria sono stati considerati adeguati per una successiva analisi. Una valutazione più approfondita ha portato all'esclusione di 37 trial, lasciando alla valutazione finale 11 studi clinici randomizzati (3 trial di fase II, per un totale di 522 pazienti, e 8 studi di fase III, per un totale di 7191 pazienti). I costi dei farmaci utilizzati nella terapia di conversione aumentano con la sostituzione del 5-fluorouracile con la capecitabina e, in misura maggiore, con l'introduzione degli agenti biologici. In questo lavoro sono presentati due punti chiave. Primo, i costi degli agenti farmacologici utilizzati nei regimi di prima linea a base di agenti biologici più comunemente utilizzati nel trattamento del carcinoma del colon-retto in stadio avanzato sono molto variabili. Secondo, i dati di efficacia dei regimi pubblicati, in termini di tassi di resezione, dipendono dalla selezione dei pazienti, dalle caratteristiche del tumore e dal tipo di schema di terapia. PMID:27571559

  12. Posible origen del agua terrestre

    NASA Astrophysics Data System (ADS)

    di Sisto, R. P.; Orellana, R. B.; Brunini, A.

    The most plausible sources of the terrestrial water are found in the main external asteroid belt, the giant planetary region and in the Kuiper belt, because of its great presence of ices. However, the timing of earth planets's formation (108 years) marks an inferior limit for the dynamical lifetime of the objects of interest since the previous megaimpacts would volatilize the icy material previusly accreted. The central parameter that allow us to rebuild the origin of water in the solar system is the rate of the Deuterium/Hydrogen isotope (D/H). The D/H measured in three comets has an average value two times greater that the value measured in the terrestrial oceans. Morbidelli et al. support that the main part of the present buldge of water on earth was product of the accretion, in the last formation stages, of some planetary embryos originally formed in the external asteroid belt. In the Jupiter zone, the D/H could be of the order of the terrestrial value. Then, we would have there posible sources with an apropiate isotopic composition that have survived for several 108 years. These sources are: the Troyan asteroids, objects in the Jupiter-Saturn region and objects in the external limit of the asteroidal belt. As for this last group we have considered in this work, the Hilda Family asteroids. The Hilda Family asteroids are placed in the 3/2 mean motion resonance with Jupiter. From the present distribution of the Hilda's orbital parameters, we generate randomly, inicial conditions for 500 massless particles in the Hildas region. Trough numerical simulations we follow their dynamical evolution during 500 millon years and its final state. The mayority of these particles are eyected out of the Solar System (76 %) due to the gravitational action of Jupiter and only a 24 % stay in the resonance zone. The 8.1 % of the particles that leave the resonance, hit Jupiter. Some objects have encounters with the terrestrial planets. From the number of encounters with each planet

  13. Home enteral nutrition in Spain; NADYA registry 2011-2012.

    PubMed

    Wanden-Berghe, Carmina; Matía Martín, P; Luengo Pérez, L M; Cuerda Compes, C; Burgos Peláez, R; Alvarez Hernández, J; Calleja Fernández, A; Pérez de la Cruz, A; Gómez Candela, C; Leyes García, P; Laborda González, L; Martínez Olmos, M A; Campos Martín, C; Suárez Llanos, J P; Penacho Lázaro, M A; Gonzalo Marín, M; Salas Salvadó, J; Irles Rocamora, J A; Cánovas Gaillemin, B; Carrero Caballero, M C; Moreno Villares, J M; Garde Orbaiz, C; Miserachs Aranda, N; Del Olmo García, M D; Apezetxea Celaya, A; Mauri, S

    2014-06-01

    Objetivos: Describir los resultados del registro de nutrición enteral domiciliaria (NED) del grupo NADYASENPE de los años 2011 y 12. Material y métodos: Se recopilaron los datos introducidos en el registro desde el 1 de enero de 2011 al 31 de diciembre de 2012. Resultados: Hubo 3021 pacientes en el registro durante el periodo, procedentes de 29 hospitales, lo que da una prevalencia de 65,39 casos por millón de habitantes. 97.95% fueron adultos, 51,4% varones. La edad media fue 67,64 ± 19,1 años y la mediana 72 años para los adultos y 7 meses para los niños. La duración media de la NED fue 351 días y para el 97,5% fue el primer episodio con NED. La mayoría de pacientes tenían NED por una enfermedad neurológica (57,8%). La vía de acceso fue sonda nasogástrica para el 43,5% y gastrostomía para el 33,5%. La mayoría de pacientes tuvieron un nivel de actividad física limitado y, respecto a la autonomía, 54,8% necesitaba ayuda total. La fórmula de nutrición se suministró desde las oficinas de farmacia para el 73,8% y los fungibles, cuando fueron necesarios, desde los hospitales para el 53,8%. La NED se suspendió en 1.031 pacientes (34,1%) durante el periodo de estudio, 56,6% debido a fallecimiento y 22,2% debido a recuperación de la vía oral. Conclusiones: Los datos del registro NADYA-SENPE deben ser interpretados con precaución ya que se trata de un registro voluntario. A pesar del cambio de metodología del registro en 2010, las tendencias en NED se han mantenido, salvo la importancia cuantitativa de la vía oral.

  14. Oscillatory surface relaxations in Ni, Al, and their ordered alloys

    SciTech Connect

    Chen, S.P.; Voter, A.F.; Srolovitz, D.J.

    1986-09-15

    Results from simulations of Ni, Al, Ni/sub 3/Al, and NiAl show long-range, oscillatory surface relaxations that decay exponentially into the bulk. Pure fcc Ni and Al have oscillation periods that are close to the nearest-neighbor distance, independent of crystal face. This is shown to be due to surface smoothing and steric effects. In Ni/sub 3/Al and NiAl, the surface planes are rippled, with the Ni-Ni and Al-Al interlayer spacings oscillating 180/sup 0/ out of phase. Very good agreement between our results and experimentally measured atomic relaxations is obtained.

  15. The mechanical properties of FeAl

    SciTech Connect

    Baker, I.; George, E.P.

    1996-12-31

    Only in the last few years has progress been made in obtaining reproducible mechanical properties data for FeAl. Two sets of observations are the foundation of this progress. The first is that the large vacancy concentrations that exist in FeAl at high temperature are easily retained at low temperature and that these strongly affect the low-temperature mechanical properties. The second is that RT ductility is adversely affected by water vapor. Purpose of this paper is not to present a comprehensive overview of the mechanical properties of FeAl but rather to highlight our understanding of key phenomena and to show how an understanding of the factors which control the yield strength and fracture behavior has followed the discovery of the above two effects. 87 refs, 9 figs.

  16. Boron strengthening in FeAl

    SciTech Connect

    Baker, I.; Li, X.; Xiao, H.; Klein, O.; Nelson, C.; Carleton, R.L.; George, E.P.

    1998-11-01

    The effect of boron on the strength of B2-structured FeAl is considered as a function of composition, grain size and temperature. Boron does not affect the concentrations of antisite atoms or vacancies present, with the former increasing and the latter decreasing with increasing deviation from the stoichiometric composition. When vacancies are absent, the strength increase per at. % B per unit lattice strain, {Delta}{sigma}/({Delta}c x {epsilon}) increases with increasing aluminum concentration, but when vacancies are present (>45 at. % Al), {Delta}{sigma}/({Delta}c x {epsilon}) decreases again. Boron increases grain size strengthening in FeAl. B strengthening is roughly independent of temperature up to the yield strength peak but above the point, when diffusion-assisted deformation occurs, boron strengthening increases dramatically.

  17. Cambios históricos en el aporte terrígeno de la cuenca del Río de la Plata sobre la plataforma interna Uruguaya

    NASA Astrophysics Data System (ADS)

    Marrero, Analía; Tudurí, Adriana; Pérez, Laura; Cuña, Caroline; Muniz, Pablo; Lopes Figueira, Rubens; Michaelovitch de Mahiques, Michel; Alves de Lima Ferreira, Paulo; Pittauerová, Daniela; Hanebuth, Till; García Rodríguez, Felipe

    2014-12-01

    El Río de la Plata (RdlP) presenta significativas variaciones naturales (hidrodinámicas y oceanográficas) asociadas a diferentes condiciones climáticas. El propósito de este trabajo es inferir los cambios de aportes continentales de sedimentos y su relación con las variaciones hidrológicas del Río de la Plata, a través del análisis de proxies sedimentológicos y geoquímicos en testigos de sedimentos de la plataforma interna uruguaya que registran los últimos 100 años, aproximadamente. A partir de la datación por 210Pb de dos testigos de sedimentos (GeoB 13813-4 y BAR1) se reconstruyó la geocronología del ambiente, y se relacionó con datos de las forzantes climáticas Pacific Decadal Oscillation, El Niño/La Niña Southern Oscillation, Atlantic Multidecadal Oscillation, y las anomalías hidrológicas de los ríos Paraná y Uruguay. Los valores más positivos y estables del Southern Oscillation Index, los cuales corresponden a fases La Niña, se observan en el periodo correspondiente entre 1910-1970, respecto al resto de la serie, donde se aprecia una mayor variabilidad y una tendencia hacia valores más negativos (eventos El Niño). Se hicieron dendrogramas (clustering) jerárquicos para ambos testigos. Para el testigo GeoB 13813-4, se utilizó la relación Ca/Ti y la granulometría, mientras que para BAR1 se recurrió a variables granulométricas y la tasa de sedimentación. El mayor aporte continental hacia la región de la plataforma adyacente al Río de la Plata registrado a partir del año 1970, podría ser el factor principal de los agrupamientos observados en los clusters para ambos testigos. Las agrupaciones mostraron una diferenciación en la década de 1970, lo que estaría asociado al aumento de los caudales de los ríos Paraná y Uruguay, durante las últimas tres décadas del siglo XX. Por otra parte se observa que la granulometría del testigo BAR1 presentó un mayor tamaño de grano y más variabilidad que en el caso del testigo Geo

  18. [Al-Biruni--a universal scientist].

    PubMed

    Kujundzić, E; Masić, I

    1999-01-01

    Al-Biruni's was of Persian descent. He was born in Horesmiya and had studied mathematics, history and medicine. Acquiring knowledge from these sciences, he wrote an outstanding work on chronology of several nations and devoted it to Ziyarit ruler Kabus. He made a chronological overview of calendars from many nations, including Persians, Greeks, Egyptians, Jews, Melkitian and Nestorian Christians, Sabeyaans as well as the old Arabs. Data presented in the work, according to the later authors, were taken from very reliable sources. He was contemporary of Ibn-Sina, and thanks to their friendship, they have discussed very much miscellaneous topics. He belonged to the group of scholars, taken by Gaznevian Soultan Mahmud to a long journey to India. Afterwards Al-Biruni wrote and published detailed work "Description of India"--a work on cultural history of India. Due to excellent abilities of Al-Biruni as a philosopher and scholar, there are still significant and reliable notes about buddhistic philosophy, structure of castes and Brahmans' life style. In this Al-Biruni's masterpiece, there are many comparative analysis of Suffism and certain Indian philosophical methods. Al-Biruni's most important work is "Pharmacopoeia"--"Kitab al-saydala", which brilliantly describes all medicaments. This work has been published in many languages. He also wrote few works on astronomy and astrology. In those works he has explained some astrological events through scientific approach in a such peculiar way that nobody has ever explained before. He was also interested in sciences like geology, mineralology, geography, mathematics, psychology and many others. PMID:10386051

  19. Individual two level fluctuators in the tunneling conductance of Al/AlOx/Al Josephson junctions for superconducting qubits

    NASA Astrophysics Data System (ADS)

    Nugroho, Christopher; Orlyanchik, Vladimir; van Harlingen, Dale

    2014-03-01

    Two level system (TLS) defects in AlOx tunnel barriers can lead to low-frequency 1 / f critical current noise and losses in coherent superconducting circuits. Understanding the nature of these defects and how to eliminate them are critical in order to achieve ultra-long coherence times. We present measurements of the tunneling conductance of ultrasmall, A <(100nm) 2 , Al/AlOx/Al shadow evaporated junctions. The tunneling conductance of these junctions exhibits several isolated TLSs, which permitted the detailed analysis of the individual switching rates and behavior of the TLSs. We have studied the thermal activation behavior of these TLSs, and in some cases observe a crossover into quantum-limited tunneling at lower temperatures. Tracking the TLS switching rates as a function of the applied voltage bias provides an estimate of the TLS charge dipole moment. In some quantum tunneling limited TLSs we have observed a non-equilibrium enhancement of the switching rates that cannot be explained by simple dissipative heating of the TLSs. Further investigations into these TLS defects may lead to the identification of their physical origins and strategies to eliminate them. Research funded by the Intelligence Advanced Research Projects Activity (IARPA).

  20. El contexto de la familia y el vecindario en la salud de los ancianos del estudio EPESE hispano

    PubMed Central

    Reyes-Ortiz, Carlos A.; Camacho, María E.; Eschbach, Karl; Markides, Kyriakos S.

    2014-01-01

    RESUMEN En este artículo se discute el papel de la familia y el vecindario en la salud de los ancianos méjico-americanos del estudio EPESE (Established Populations for Epidemiologic Studies of the Elderly) hispano. La paradoja epidemiológica consiste en que, a pesar de estar en desventaja socioeconómica, los ancianos hispanos tienen mortalidad relativamente menor que los ancianos de raza blanca. Esto es especialmente cierto cuando el anciano vive en los vecindarios donde hay un porcentaje alto de méjico-americanos. La familia también juega un papel importante en estos ancianos al disminuir el riesgo de institucionalización o de morbilidad. Asimismo, el estrés originado en problemas económicos o al depender económicamente de la familia, habiendo inmigrado en edades tardías, puede sobrepasar la capacidad de amortiguamiento del estrés y afectar la salud del anciano méjico-americano. PMID:25190897

  1. Complementary and Alternative Therapies in ALS

    PubMed Central

    Bedlack, Richard S.; Joyce, Nanette; Carter, Gregory T.; Pagononi, Sabrina; Karam, Chafic

    2015-01-01

    Synopsis Given the severity of their illness and lack of effective disease modifying agents, it is not surprising that most patients with ALS consider trying complementary and alternative therapies. Some of the most commonly considered alternative therapies include special diets, nutritional supplements, cannabis, acupuncture, chelation and energy healing. This chapter reviews these in detail. We also describe 3 models by which physicians may frame discussions about alternative therapies: paternalism, autonomy and shared decision making. Finally, we review a program called ALSUntangled which using shared shared decision making to review alternative therapies for ALS. PMID:26515629

  2. A Comment on Eerland et al. (2016).

    PubMed

    Hart, William

    2016-03-01

    People imagine criminal behavior in greater detail and ascribe more blame to criminals when a description of a crime is written using the imperfective verb aspect (Hart & Albarracín, 2011, Experiment 3). An initiative to reproduce these findings conducted by Eerland et al. (2016) yielded a lack of replication. Eerland et al. have suggested that the original effect was likely driven by a Type I error produced by methodological aspects of the experiment, including low sample size. Recent conceptual replications of Hart and Albarracín's effect (Sherrill, Eerland, Zwaan, & Magliano, 2015), however, might imply the effect could be contingent on sample characteristics. PMID:26993281

  3. Fabrication and Characterization of AL-AL4C3 Nanocomposite by Mechanical Alloying

    NASA Astrophysics Data System (ADS)

    Mohammad Sharifi, E.; Enayati, M. H.; Karimzadeh, F.

    Aluminum carbide (Al4C3) seems to be an ideal reinforcement for producing aluminum matrix composites. Al4C3 has high hardness and shear strength as well as a high melting point. The dispersion of Al4C3 particles in the matrix produces a pinning effect that reduces aluminum grain growth, which improves the mechanical properties. In this study, aluminum powders were mixed with 4.5 wt.% graphite and mechanically alloyed using a high-energy ball mill in order to produce Al-Al4C3 nanocomposite. The structural evaluation of powder particles after different milling times was studied by X-ray diffractometry, scanning electron microscopy and microhardness measurements. The aluminum crystallite size estimated with broadening of XRD peaks by Williamson-Hall formula. XRD results suggested that the grain size of aluminum decreased to nanometer range (30 nm) during ball milling. No Al4C3 formed during the mechanical alloying process. Milled powders were then annealed at 300-600 °C for 1 h under argon atmosphere. Annealing at temperatures higher than 300 °C led to formation of Al4C3 phase which increased as annealing temperature increased. Aluminum grain size remained in nanometer range after annealing process. The microhardness of powder particles increased after annealing. Both effects are due to the formation of nanosized Al4C3 particles.

  4. Melting, Processing, and Properties of Disordered Fe-Al and Fe-Al-C Based Alloys

    NASA Astrophysics Data System (ADS)

    Satya Prasad, V. V.; Khaple, Shivkumar; Baligidad, R. G.

    2014-09-01

    This article presents a part of the research work conducted in our laboratory to develop lightweight steels based on Fe-Al alloys containing 7 wt.% and 9 wt.% aluminum for construction of advanced lightweight ground transportation systems, such as automotive vehicles and heavy-haul truck, and for civil engineering construction, such as bridges, tunnels, and buildings. The melting and casting of sound, porosity-free ingots of Fe-Al-based alloys was accomplished by a newly developed cost-effective technique. The technique consists of using a special flux cover and proprietary charging schedule during air induction melting. These alloys were also produced using a vacuum induction melting (VIM) process for comparison purposes. The effect of aluminum (7 wt.% and 9 wt.%) on melting, processing, and properties of disordered solid solution Fe-Al alloys has been studied in detail. Fe-7 wt.% Al alloy could be produced using air induction melting with a flux cover with the properties comparable to the alloy produced through the VIM route. This material could be further processed through hot and cold working to produce sheets and thin foils. The cold-rolled and annealed sheet exhibited excellent room-temperature ductility. The role of carbon in Fe-7 wt.% Al alloys has also been examined. The results indicate that Fe-Al and Fe-Al-C alloys containing about 7 wt.% Al are potential lightweight steels.

  5. Transport mechanisms of leakage current in Al2O3/InAlAs MOS capacitors

    NASA Astrophysics Data System (ADS)

    Jin, Chengji; Lu, Hongliang; Zhang, Yimen; Zhang, Yuming; Guan, He; Wu, Lifan; Lu, Bin; Liu, Chen

    2016-09-01

    An Al2O3 layer is inserted between the InAlAs layer and the metal gate in InAs/AlSb HEMTs to suppress the leakage current. The transport mechanisms of leakage current in Al2O3/InAlAs metal-oxide-semiconductor (MOS) capacitors at both positive and negative biases at different temperatures ranging from 10 °C to 70 °C are investigated. For positive bias, the leakage current is dominated by Schottky emission. Based on the fitted straight lines, the relative dielectric constant of Al2O3 and the barrier height between Al2O3 and InAlAs are extracted. However, for negative bias, the leakage current is dominated by Frenkel-Poole (F-P) emission and the depth of the trap energy level from the conduction band (ϕt) is extracted. Furthermore, authors explain the reason why the dominating mechanisms at positive and negative biases are different.

  6. Electronic circuits having NiAl and Ni.sub.3 Al substrates

    DOEpatents

    Deevi, Seetharama C.; Sikka, Vinod K.

    1999-01-01

    An electronic circuit component having improved mechanical properties and thermal conductivity comprises NiAl and/or Ni.sub.3 Al, upon which an alumina layer is formed prior to applying the conductive elements. Additional layers of copper-aluminum alloy or copper further improve mechanical strength and thermal conductivity.

  7. Directional Solidification and Mechanical Properties of NiAl-NiAlTa Alloys

    NASA Technical Reports Server (NTRS)

    Johnson, D. R.; Chen, X. F.; Oliver, B. F.; Noebe, R. D.; Whittenberger, J. D.

    1995-01-01

    Directional solidification of eutectic alloys is a promising technique for producing in-situ composite materials exhibiting a balance of properties. Consequently, the microstructure, creep strength and fracture toughness of directionally solidified NiAl-NiAlTa alloys were investigated. Directional solidification was performed by containerless processing techniques to minimize alloy contamination. The eutectic composition was found to be NiAl-15.5 at% Ta and well-aligned microstructures were produced at this composition. A near-eutectic alloy of NiAl-14.5Ta was also investigated. Directional solidification of the near-eutectic composition resulted in microstructures consisting of NiAl dendrites surrounded by aligned eutectic regions. The off-eutectic alloy exhibited promising compressive creep strengths compared to other NiAl-based intermetallics, while preliminary testing indicated that the eutectic alloy was competitive with Ni-base single crystal superalloys. The room temperature toughness of these two-phase alloys was similar to that of polycrystalline NiAl even with the presence of the brittle Laves phase NiAlTa.

  8. Characterization of nanophase Al-oxide/Al powders by electron energy-loss spectroscopy.

    PubMed

    Fernández; Sánchez-López; Caballero; Martin; Vacher; Ponsonnet

    1998-08-01

    Al nanoparticles were prepared by the inert gas condensation method. After passivation with oxygen and air exposure we obtained a powdered sample of an Al-oxide/Al nanocomposite material. In the present paper we describe the use of the electron energy-loss spectroscopy (EELS) technique in a transmission electron microscope to characterize such nanostructured powders compared with a microcrystalline commercial aluminium foil. Energy-filtered images showed the presence of an alumina overlayer of approximately 4 nm covering the aluminium nanoparticles (23 nm in diameter). EELS analysis enabled us to determine the total amount of Al2O3 and metallic Al and the structure of the alumina passivation overlayer in the sample. In particular, the extended energy-loss fine structure analysis of the data showed a major presence of Al tetrahedrally coordinated with oxygen in the alumina passivation layer of Al nanoparticles instead of the octahedral coordination found for a conventional Al foil. This surprising effect has been attributed to the nanoscopic character of the grains. The analysis of the electron-loss near-edge structure also determines the presence of a certain degree of aggregation in this kind of powdered sample as result of the coalescence of the nanocrystalline grains. The procedure presented here may have the potential to solve other problems during characterization of nanostructured materials.

  9. AlN homoepitaxial growth on sublimation-AlN substrate by low-pressure HVPE

    NASA Astrophysics Data System (ADS)

    Nomura, Takuya; Okumura, Kenta; Miyake, Hideto; Hiramatsu, Kazumasa; Eryu, Osamu; Yamada, Yoichi

    2012-07-01

    Crack-free thick AlN layers with low impurity concentrations were grown on free-standing AlN substrates fabricated by a sublimation method. Cracks due to tensile stresses were generated in the overgrowth layer when using on-axis AlN (0 0 0 1) substrates, as indicated by Raman scattering spectroscopy. In contrast, cracks were not generated when using 5° off-angle AlN (0 0 0 1) substrates. High crystalline quality was indicated by X-ray rocking curve (XRC) analysis. The full width at half maximum (FWHM) values of the (0 0 0 2) and (1 0-1 0) diffractions were 277 and 306 arcsec, respectively. Secondary ion mass spectrometry (SIMS) measurements indicated that the Si and C impurity concentrations were reduced to half of those in the sublimation-grown AlN substrates.

  10. Al/sub 2/O/sub 3/ adherence on CoCrAl alloys

    SciTech Connect

    Kingsley, L.M.

    1980-04-01

    Adherence of protective oxides on NiCrAl and CoCrAl superalloys has been promoted by a dispersion of a highly oxygen reactive element or its oxide being produced within the protection system. Two aspects of this subject are investigated here: the use of Al/sub 2/O/sub 3/ as both the dispersion and protective oxide; and the production of an HfO/sub 2/ dispersion while simultaneously aluminizing the alloy. It was found that an Al/sub 2/O/sub 3/ dispersion will act to promote the adherence of an external scale of Al/sub 2/O/sub 3/ to a degree comparable to previously tested dispersions and an HfO/sub 2/ dispersion comparable to that produced by a Rhines pack treatment is produced during aluminization.

  11. Bonding characters of Al-containing bulk metallic glasses studied by 27Al NMR.

    PubMed

    Xi, X K; Sandor, M T; Wang, H J; Wang, J Q; Wang, W H; Wu, Y

    2011-03-23

    We report very small (27)Al metallic shifts in a series of Cu-Zr-Al bulk metallic glasses. This observation and the Korringa type of spin-lattice relaxation behavior suggest that s-character wavefunctions weakly participate in bonding and opens the possibility of enhanced covalency (pd hybridization) with increasing Al concentration, in good agreement with elastic constants and hardness measurements. Moreover, ab initio calculations show that this bonding character originates from the strong Al 3p band and Zr 4d band hybridization since their atomic energy levels are closer to each other while the Al 3s band is localized far below the Fermi level. This study might provide a chemical view for understanding flow and fracture mechanisms of these bulk glass-forming alloys.

  12. CVD Fiber Coatings for Al2O3/NiAl Composites

    NASA Technical Reports Server (NTRS)

    Boss, Daniel E.

    1995-01-01

    While sapphire-fiber-reinforced nickel aluminide (Al2O3/NiAl) composites are an attractive candidate for high-temperature structures, the significant difference in the coefficient of thermal expansion between the NiAl matrix and the sapphire fiber creates substantial residual stresses in the composite. This study seeks to produce two fiber-coating systems with the potential to reduce the residual stresses in the sapphire/NiAl composite system. Chemical vapor deposition (CVD) was used to produce both the compensating and compliant-fiber coatings for use in sapphire/NiAl composites. A special reactor was designed and built to produce the FGM and to handle the toxic nickel precursors. This process was successfully used to produce 500-foot lengths of fiber with coating thicknesses of approximately 3 microns, 5 microns, and 10 microns.

  13. Formation of gamma'-Ni3Al via the Peritectoid Reaction: gamma plus beta (+Al2O3) equals gamma'(+Al2O3)

    NASA Technical Reports Server (NTRS)

    Copland, Evan

    2008-01-01

    The activities of Al and Ni were measured using multi-cell Knudsen effusion-cell mass spectrometry (multi-cell KEMS), over the composition range 8 - 32 at.%Al and temperature range T = 1400 - 1750 K in the Ni-Al-O system. These measurements establish that equilibrium solidification of gamma'-Ni3Al-containing alloys occurs by the eutectic reaction, L (+ Al2O3) = gamma + beta (+ Al2O3), at 1640 plus or minus 1 K and a liquid composition of 24.8 plus or minus 0.2 at.%Al (at an unknown oxygen content). The {gamma + beta + Al2O3} phase field is stable over the temperature range 1633 - 1640 K, and gamma'-Ni3Al forms via the peritectiod, gamma + beta (+ Al2O3) = gamma'(+ Al2O3), at 1633 plus or minus 1 K. This behavior is inconsistent with the current Ni-Al phase diagram and a new diagram is proposed. This new Ni-Al phase diagram explains a number of unusual steady state solidification structures reported previously and provides a much simpler reaction scheme in the vicinity of the gamma'-Ni3Al phase field.

  14. Formation of gamma(sup prime)-Ni3Al via the Peritectoid Reaction: gamma + beta (+ Al2O3)=gamma(sup prime)(+ Al2O3)

    NASA Technical Reports Server (NTRS)

    Copeland, Evan

    2008-01-01

    The activities of Al and Ni were measured using multi-cell Knudsen effusion-cell mass spectrometry (multi-cell KEMS), over the composition range 8-32 at.%Al and temperature range T=1400-1750 K in the Ni-Al-O system. These measurements establish that equilibrium solidification of gamma(sup prime)-Ni3Al-containing alloys occurs by the eutectic reaction, L (+ Al2O3)=gamma + Beta(+ Al2O3), at 1640 +/- 1 K and a liquid composition of 24.8 +/- 0.2 at.%al (at an unknown oxygen content). The {gamma + Beta (+Al2O3} phase field is stable over the temperature range 1633-1640 K, and gamma(sup prime)-Ni3Al forms via the peritectoid, gamma + Beta (+ Al2O3)=gamma(sup prime) (+ Al2O3), at 1633 +/- 1 K. This behavior is consistent with the current Ni-Al phase diagram and a new diagram is proposed. This new Ni-Al phase diagram explains a number of unusual steady-state solidification structures reported previously and provides a much simpler reaction scheme in the vicinity of the gamma(sup prime)-Ni2Al phase field.

  15. Effect of stress on the Al composition evolution in AlGaN grown using metal organic vapor phase epitaxy

    NASA Astrophysics Data System (ADS)

    He, Chenguang; Qin, Zhixin; Xu, Fujun; Zhang, Lisheng; Wang, Jiaming; Hou, Mengjun; Zhang, Shan; Wang, Xinqiang; Ge, Weikun; Shen, Bo

    2016-05-01

    Two series of AlGaN samples with different stresses were designed to investigate the effect of stress on the Al composition. X-ray diffraction reciprocal space mapping (XRD RSM) demonstrated that the AlGaN epilayers with different stresses have large Al composition differences despite the same growth conditions. The largest Al composition difference reached up to 21.3%, which was also confirmed using secondary ion mass spectroscopy (SIMS). This result is attributed to a large stress discrepancy in the AlGaN epilayers. Finally, the dependences of the solid-phase Al composition on the gas-phase Al composition under different stresses were systematically analyzed.

  16. The Punta del Cobre Formation, Punta del Cobre Candelaria area, northern Chile

    NASA Astrophysics Data System (ADS)

    Marschik, Robert; Fontboté, Lluís.

    2001-09-01

    The Punta del Cobre Formation hosts the iron oxide-rich Cu-Au(-Zn-Ag) deposits of the Punta del Cobre belt, Chile. Hydrothermal alteration associated with mineralization and/or contact metamorphism caused by the Coastal Batholith exposed in the west resulted in new mineral assemblages and significant changes in the geochemical composition of its rocks. This paper presents a redefinition of the Punta del Cobre Formation and discusses its geologic context. The Punta del Cobre Formation is subdivided, from bottom to top, into: (1) the 'Geraldo-Negro Member', composed mainly of massive andesitic volcanic rocks (>300 m) and locally dacitic rocks (up to 200 m) that overlie the latter, and (2) the 'Algarrobos Member' (up to >800 m) comprising mainly volcaniclastic rocks, basalt andesitic and basaltic flows, and volcanic breccias. The Punta del Cobre Formation is overlain by the Chañarcillo Group, the lowest part of which is represented by alternating carbonate and volcaniclastic beds of the Abundancia Formation, which pass vertically and laterally into limestones of the Nantoco Formation. The contact between the Punta del Cobre Formation and the overlying Abundancia Formation is transitional and defined by the first continuous bed of massive limestone or its metamorphosed equivalent. A pre-upper Valanginian age for the Punta del Cobre Formation is suggested by ammonites of Berriasian age found in the upper part of the Algarrobos Member and Late Valanginian-Early Hauterivian fauna in the overlying Abundancia Formation. Despite the intense alteration, immobile element compositions of the volcanic rocks of the Punta del Cobre Formation enable the recognition of a calc-alkaline suite with a trend to more primitive, less differentiated magmas towards the top of the stratigraphic sequence, reflecting initial stages of basin development. The transgressive nature of the sedimentary part of the Punta del Cobre Formation marks the onset of increased subsidence that eventually

  17. Microstructure of Ni-Al powder and Ni-Al composite coatings prepared by twin-wire arc spraying

    NASA Astrophysics Data System (ADS)

    Wang, Ji-xiao; Wang, Gui-xian; Liu, Jing-shun; Zhang, Lun-yong; Wang, Wei; Li, Ze; Wang, Qi-xiang; Sun, Jian-fei

    2016-07-01

    Ni-Al powder and Ni-Al composite coatings were fabricated by twin-wire arc spraying (TWAS). The microstructures of Ni-5wt%Al powder and Ni-20wt%Al powder were characterized by scanning electronic microscopy (SEM) and energy dispersive spectroscopy (EDS). The results showed that the obtained particle size ranged from 5 to 50 μm. The morphology of the Ni-Al powder showed that molten particles were composed of Ni solid solution, NiAl, Ni3Al, Al2O3, and NiO. The Ni-Al phase and a small amount of Al2O3 particles changed the composition of the coating. The microstructures of the twin-wire-arc-sprayed Ni-Al composite coatings were characterized by SEM, EDS, X-ray diffraction (XRD), and transmission electron microscopy (TEM). The results showed that the main phase of the Ni-5wt%Al coating consisted of Ni solid solution and NiAl in addition to a small amount of Al2O3. The main phase of the Ni-20wt%Al coating mainly consisted of Ni solid solution, NiAl, and Ni3Al in addition to a small amount of Al and Al2O3, and NiAl and Ni3Al intermetallic compounds effectively further improved the final wear property of the coatings. TEM analysis indicated that fine spherical NiAl3 precipitates and a Ni-Al-O amorphous phase formed in the matrix of the Ni solid solution in the original state.

  18. Comprension de los conceptos de los enlaces ionico y covalente en estudiantes universitarios del primer curso de quimica general

    NASA Astrophysics Data System (ADS)

    Ballesteros Benavides, Maria Elvira

    Para este trabajo utilizamos el estudio de casos cualitativo que se llevo a cabo en una universidad privada de Puerto Rico. Empleamos como unidad de analisis el concepto de enlace quimico, ionico y covalente. Los participantes fueron los estudiantes de la seccion nocturna del curso de Quimica General I. La investigacion se desarrollo por medio de dos entrevistas de persona a persona, observaciones de las expresiones no verbales y la hoja de identificacion de conceptos. Para la triangulacion tomamos en consideracion las preconcepciones erroneas, las concepciones alternativas y el mapa de conceptos de cada participante. Preparamos un mapa de conceptos para el enlace quimico validado por un comite de expertos. Tambien, elaboramos los mapas de conceptos de los participantes que sirvieron para varios propositos: conocer la estructura conceptual, expresar los logros, hacer comparaciones e identificar la presencia de concepciones alternativas. Entre los hallazgos encontramos que todos los participantes poseen conocimiento previo de los enlaces quimicos ionico y covalente y dentro de ese conocimiento existen preconcepciones erroneas mas numerosas para el enlace ionico. Al principio del semestre el 50% de los participantes demostraron tener "carencia fuerte de conceptos" tanto para el enlace ionico como para el covalente. Al finalizar el semestre encontramos en el 40% de los participantes concepciones alternativas tanto para el enlace ionico como para el covalente y el 90% no lograron distinguir un enlace del otro. Nuestras conclusiones fueron que los participantes sin distincion del aprovechamiento academico demostraron tener la tendencia de "carencia fuerte de conceptos" tanto para el enlace ionico como para el covalente, presentaron dificultad al integrar los conceptos de los enlaces quimicos ionico y covalente que se pusieron de manifiesto al dar los ejemplos. Las preconcepciones erroneas contribuyen en el desarrollo de las concepciones alternativas. Ademas, los

  19. Ternary Dy-Er-Al magnetic refrigerants

    DOEpatents

    Gschneidner, Jr., Karl A.; Takeya, Hiroyuki

    1995-07-25

    A ternary magnetic refrigerant material comprising (Dy.sub.1-x Er.sub.x)Al.sub.2 for a magnetic refrigerator using the Joule-Brayton thermodynamic cycle spanning a temperature range from about 60K to about 10K, which can be adjusted by changing the Dy to Er ratio of the refrigerant.

  20. Bierman {ital et al.}Reply:

    SciTech Connect

    Bierman, J.D.; Chan, P.; Liang, J.F.; Kelly, M.P.; Sonzogni, A.A.; Vandenbosch, R.

    1997-05-01

    reply to the Comment by C.H.Dasso et al., Phys. Rev. Lett. 78,XXX(1997). A Reply to the Comment by C.H. Dasso and J. Fern{acute a}ndez-Niello. {copyright} {ital 1997} {ital The American Physical Society}

  1. Hughes et al.: Science or Promotion?

    ERIC Educational Resources Information Center

    Loman, L. Anthony; Siegel, Gary L.

    2013-01-01

    The Hughes et al. paper is critiqued generally and in specific areas. The weak nature of the authors' empirical work is discussed along with their enigmatic writing and vague and incorrect use of references, and their simultaneous use of sweeping statements of opinion and narrow analytical focus. This review examines the authors' errors…

  2. Kinematics of Disease Progression in Bulbar ALS

    ERIC Educational Resources Information Center

    Yunusova, Yana; Green, Jordan R.; Lindstrom, Mary J.; Ball, Laura J.; Pattee, Gary L.; Zinman, Lorne

    2010-01-01

    The goal of this study was to investigate the deterioration of lip and jaw movements during speech longitudinally in three individuals diagnosed with bulbar amyotrophic lateral sclerosis (ALS). The study was motivated by the need to understand the relationship between physiologic changes in speech movements and clinical measures of speech…

  3. Al/Cl2 molten salt battery

    NASA Technical Reports Server (NTRS)

    Giner, J.

    1972-01-01

    Molten salt battery has been developed with theoretical energy density of 5.2 j/kg (650 W-h/lb). Battery, which operates at 150 C, can be used in primary mode or as rechargeable battery. Battery has aluminum anode and chlorine cathode. Electrolyte is mixture of AlCl3, NaCl, and some alkali metal halide such as KCl.

  4. Cryptanalysis on Cheng et al. protocol

    NASA Astrophysics Data System (ADS)

    Thakur, Tejeshwari

    2016-06-01

    Deployment of new node in any wireless sensor network is a sensitive task. This is the reason why, an Access Control Protocol is required in WSN. In this paper, we demonstrate that Access Control Protocol proposed by Cheng et al.[1] for Wireless Sensor Network is insecure. The reason is that this protocol fails to resist the active attack.

  5. Ternary Dy-Er-Al magnetic refrigerants

    DOEpatents

    Gschneidner, K.A. Jr.; Takeya, Hiroyuki

    1995-07-25

    A ternary magnetic refrigerant material comprising (Dy{sub 1{minus}x}Er{sub x})Al{sub 2} for a magnetic refrigerator using the Joule-Brayton thermodynamic cycle spanning a temperature range from about 60K to about 10K, which can be adjusted by changing the Dy to Er ratio of the refrigerant. 29 figs.

  6. Synopsis of "Reply to Levitas et al."

    ERIC Educational Resources Information Center

    O'Brien, John

    1994-01-01

    This synopsis of a reply by Wolf Wolfensberger to a critique by Levitas et al. (EC 609 743) notes extensive documentation supporting Wolfensberger's assertion that prescription psychoactive drugs are health destroying and life destroying. Issues of truth and of epistemology are identified as they apply to the treatment of these socially devalued…

  7. 76 FR 62481 - Incapital LLC, et al.

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-07

    ... From the Federal Register Online via the Government Publishing Office SECURITIES AND EXCHANGE COMMISSION Incapital LLC, et al.; Notice of Application September 30, 2011. AGENCY: Securities and Exchange Commission (``Commission''). ACTION: Notice of application for an order under section 12(d)(1)(J) of...

  8. U-ALS: A Ubiquitous Learning Environment

    ERIC Educational Resources Information Center

    Piovesan, Sandra Dutra; Passerino, Liliana Maria; Medina, Roseclea Duarte

    2012-01-01

    The diffusion of the use of the learning virtual environments presents a great potential for the development of an application which meet the necessities in the education area. In view of the importance of a more dynamic application and that can adapt itself continuously to the students' necessities, the "U-ALS" (Ubiquitous Adapted Learning…

  9. SPI measurements of Galactic 26Al

    NASA Astrophysics Data System (ADS)

    Diehl, R.; Knödlseder, J.; Lichti, G. G.; Kretschmer, K.; Schanne, S.; Schönfelder, V.; Strong, A. W.; von Kienlin, A.; Weidenspointner, G.; Winkler, C.; Wunderer, C.

    2003-11-01

    The precision measurement of the 1809 keV gamma-ray line from Galactic 26Al is one of the goals of the SPI spectrometer on INTEGRAL with its Ge detector camera. We aim for determination of the detailed shape of this gamma-ray line, and its variation for different source regions along the plane of the Galaxy. Data from the first part of the core program observations of the first mission year have been inspected. A clear detection of the 26Al line at =~ 5-7 sigma significance demonstrates that SPI will deepen 26Al studies. The line intensity is consistent with expectations from previous experiments, and the line appears narrower than the 5.4 keV FWHM reported by GRIS, more consistent with RHESSI's recent value. Only preliminary statements can be made at this time, however, due to the multi-component background underlying the signal at =~ 40 times higher intensity than the signal from Galactic 26Al.

  10. Aluminum matrix texture in Al-Al3Ti functionally graded materials analyzed by electron back-scattering diffraction

    NASA Astrophysics Data System (ADS)

    Watanabe, Yoshimi; Sequeira, Paulo D.; Sato, Hisashi; Inamura, Tomonari; Hosoda, Hideki

    2016-01-01

    Al matrix functionally graded materials (FGMs) with oriented Al3Ti platelets were fabricated by a centrifugal solid-particle method. The applied centrifugal forces were 30, 60, and 120G (units of gravity). The orientation and volume fraction gradients of the Al3Ti platelets within the samples were measured. Since a good lattice correspondence was reported for the close-packed directions and the close-packed planes between Al and Al3Ti, the Al matrix in the Al-Al3Ti FGMs fabricated by the centrifugal solid-particle method should have some texture. Al matrix texture was, therefore, analyzed by electron back-scattering diffraction (EBSD). Analysis of the resulting pole figures indicates a preferred orientation along the (200) plane for the Al matrix crystals. Furthermore, increasing the applied centrifugal force enhances the orientation effect. A correlation appears to exist between platelet orientation and the preferred texture of the Al matrix.

  11. Spectroscopic analysis of the open 3d subshell transition metal aluminides: AlV, AlCr, and AlCo

    NASA Astrophysics Data System (ADS)

    Behm, Jane M.; Brugh, Dale J.; Morse, Michael D.

    1994-10-01

    Three open 3d subshell transition metal aluminides, AlV, AlCr, and AlCo, have been investigated by resonant two-photon ionization spectroscopy to elucidate the chemical bonding in these diatomic molecules. The open nature of the 3d subshell results in a vast number of excited electronic states in these species, allowing bond strengths to be measured by the observation of abrupt predissociation thresholds in a congested optical spectrum, giving D00(AlV)=1.489±0.010 eV, D00(AlCr)=2.272±0.009 eV, and D00(AlCo)=1.844±0.002 eV. At lower excitation energies the presence of discrete transitions has permitted determinations of the ground state symmetries and bond lengths of AlV and AlCo through rotationally resolved studies, giving r0` (AlV, Ω`=0)=2.620±0.004 Å and r0` (AlCo, Ω`=3)=2.3833±0.0005 Å. Ionization energies were also measured for all three species, yielding IE(AlV)=6.01±0.10 eV, IE(AlCr)=5.96±0.04 eV, and IE(AlCo)=6.99±0.17 eV. A discussion of these results is presented in the context of previous work on AlCu, AlNi, AlCa, and AlZn.

  12. Informe sobre el avance del proyecto de determinaciones de V sen i para todas las estrellas B más brillantes que 6.5 mag.

    NASA Astrophysics Data System (ADS)

    Abt, H.; Levato, H.

    Se ha finalizado con la determinación de V sen i para todas las estrellas B más brillantes que 6.5 mag y al norte de -30 grados de declinación. Esta muestra involucra casi 1000 estrellas. Las observaciones fueron realizadas desde KPNO. Mientras tanto, se ha completado desde CASLEO la observación de 350 estrellas B más brillantes que 6.5 mag. al sur de -30 grados. Además de la determinación de la rotación axial se determinan, en los casos posibles, los anchos equivalentes de las líneas 4471 Ådel He I y 4481 Ådel Mg II.

  13. Thermoelectric Powers of Cells With NaF-AlF3-Al2O3 Melts

    NASA Astrophysics Data System (ADS)

    Flem, Belinda E.; Xu, Qian; Kjelstrup, Signe; Sterten, Åsmund

    2001-07-01

    A thermodynamic description of the Peltier heat at the aluminum and the oxygen electrode in the system NaF-AlF3-Al2O3 is given. The thermoelectric power in melts with molar ratios n NaF/n AlF3 from 3.0 to 1.0, saturated with alumina are measured. Seebeck coefficients for molten fluoride electrolytes saturated with alumina, electrolytes that are relevant for aluminum electrowinning electrolysis cells, are reported. The results allow determinations of Peltier heats of aluminum, oxygen and carbon electrodes in NaF-AlF3 electrolytes saturated with alumina. For molar ratios of n NaF/n AlF3 between 2.6 and 1.2, there is a Peltier heating of the aluminum cathode. This heating is in the same order of magnitude as the electrolyte Joule heat, when the current density is 0.7 A cm-2. For molar ratio n NaF/n AlF3 equal to 1.0 the Peltier effect at the aluminum electrode approaches zero. From theoretical considerations we expect a drop also for molar ratio 3.0. For the anode we report a Peltier cooling that is larger than the heat produced by the anodic overvoltage, in melts with NaF/AlF3 molar ratio between 2.6 and 1.2 saturated with alumina.

  14. A novel Al matrix composite reinforced by nano-AlNp network

    PubMed Central

    Ma, X.; Zhao, Y. F.; Tian, W. J.; Qian, Z.; Chen, H. W.; Wu, Y. Y.; Liu, X. F.

    2016-01-01

    In pursuit of lightweighting of automobiles and low emission of transportation, the efforts to develop high-strength, heat-resistant and fatigue-resistant Al alloys and/or composites have been ongoing. Here we report a novel Al matrix composite with ultrahigh strength reinforced by a three dimensional network of nano-AlN particles for the first time. The in-situ synthesized AlN particles are connected by twinning bonding chains and built up a three dimensional network strengthening Al matrix enormously like the skeleton to human body. The composite containing 16.4wt.% AlN particles shows excellent properties: the ultimate tensile strengths can be up to 518MPa at room temperature and 190MPa at 350 °C. This peculiar performance results from the novel spatial distribution of nano-scale AlN particles. Our findings in this work would help to develop a potential candidate for high-performance heat resistance light-metal based materials. PMID:27721417

  15. Effect of speciation transformation on the coagulation behavior of Al(13) and Al(13) aggregates.

    PubMed

    Wu, Xiaohong; Ye, Changqing; Wang, Dongsheng; Ge, Xiaopeng; Tang, Hongxiao

    2009-01-01

    Flocculation of kaolin suspension with aluminium fractal polycations was investigated as a function of aluminium concentration and pH. Aluminium flocculants included Al(13) and Al(13) aggregates with OH/Al ratio of 2.6 and 2.8, respectively. The flocculation kinetics and floc size distribution were monitored by light scattering. The characterization of flocculants showed that the tridecatmer Al(13) and bridged [Al(13)](n) with out-sphere structure were the dominant species for all flocculants in a wide pH range. The coagulation results indicated that the pre and in situ-formed [Al(13)](n) play a key role in removing particles. With the increasing concentration of [Al(13)](n), coagulation mechanisms were transformed from charge-neutralization, electro-patch coagulation to bridge-aggregation. Moreover, sweep-flocculation was involved at higher dosage besides other three mechanisms when amorphous aluminium oxides formed. Hence, chemical interaction between particles and flocculants evolved from surface adsorption to surface precipitation for aluminium polycations by virtue of species transformation. PMID:19237777

  16. A novel Al matrix composite reinforced by nano-AlNp network

    NASA Astrophysics Data System (ADS)

    Ma, X.; Zhao, Y. F.; Tian, W. J.; Qian, Z.; Chen, H. W.; Wu, Y. Y.; Liu, X. F.

    2016-10-01

    In pursuit of lightweighting of automobiles and low emission of transportation, the efforts to develop high-strength, heat-resistant and fatigue-resistant Al alloys and/or composites have been ongoing. Here we report a novel Al matrix composite with ultrahigh strength reinforced by a three dimensional network of nano-AlN particles for the first time. The in-situ synthesized AlN particles are connected by twinning bonding chains and built up a three dimensional network strengthening Al matrix enormously like the skeleton to human body. The composite containing 16.4wt.% AlN particles shows excellent properties: the ultimate tensile strengths can be up to 518MPa at room temperature and 190MPa at 350 °C. This peculiar performance results from the novel spatial distribution of nano-scale AlN particles. Our findings in this work would help to develop a potential candidate for high-performance heat resistance light-metal based materials.

  17. Some TEM observations of Al2O3 scales formed on NiCrAl alloys

    NASA Technical Reports Server (NTRS)

    Smialek, J.; Gibala, R.

    1979-01-01

    The microstructural development of Al2O3 scales on NiCrAl alloys has been examined by transmission electron microscopy. Voids were observed within grains in scales formed on a pure NiCrAl alloy. Both voids and oxide grains grew measurably with oxidation time at 1100 C. The size and amount of porosity decreased towards the oxide-metal growth interface. The voids resulted from an excess number of oxygen vacancies near the oxidemetal interface. Short-circuit diffusion paths were discussed in reference to current growth stress models for oxide scales. Transient oxidation of pure, Y-doped, and Zr-doped NiCrAl was also examined. Oriented alpha-(Al, Cr)2O3 and Ni(Al, Cr)2O4 scales often coexisted in layered structures on all three alloys. Close-packed oxygen planes and directions in the corundum and spinel layers were parallel. The close relationship between oxide layers provided a gradual transition from initial transient scales to steady state Al2O3 growth.

  18. When Validity Testing Lacks Validity: Comment on Levine et al.

    ERIC Educational Resources Information Center

    Kim, Min-Sun; Raja, Narayan S.

    2003-01-01

    Addresses each of the three main areas of Levine et al.'s (see this issue, CS 764 297) validity testing: mean differences in self-construals between Asians and Westerners and within individuals; priming experiments; and factor analysis of self-construal scales. Suggests that Levine et al.'s conclusions on crucial aspects of validity are untenable.…

  19. An epidemiological study of cutaneous leishmaniasis in Al-jabal Al-gharbi, Libya.

    PubMed

    Abdellatif, Manal Z M; El-Mabrouk, Khamis; Ewis, Ashraf A

    2013-02-01

    Cutaneous leishmaniasis (CL) is an endemic parasitic infection in the Mediterranean region, including Libya and its Al-jabal Al-gharbi province. We aimed at studying the occupational relevance as well as other epidemiological aspects of CL. We investigated 140 CL cases who attended at Gharyan outpatient polyclinic during a period of 6 months in 2009. CL infection was clinically diagnosed and confirmed by demonstration of Leishmania parasites on smears from lesions. Our findings showed that males were more affected than females (P=0.04), and people above 10-years were more affected than younger ones (P=0.0001). A significant percent of CL cases belonged to Al-Kawasem subprovince (P=0.0001). Farm-related activities were the most frequent occupations among CL cases (P=0.04). In addition to farm workers, housewives and students are at risk groups since they are engaged at farm activities. Moreover, those who have occupations that require staying outdoors for a part of night, e.g., policemen, are also at risk. Compared to children, adult CL patients had multiple lesions (P=0.001) that were more prevalent in their upper and lower extremities than the face (P=0.0001). We conclude that CL is a major health problem in Al-jabal Al-gharbi province of Libya. The presence of rodents and sandflies makes it a suitable environment for Leishmania to spread in an endemic epidemiological pattern. Being engaged in farming activities or outdoor occupations increases the risk of infection. Various clinical patterns of CL suggest the presence of more than 1 species of Leishmania at Al-jabal Al-gharbi province. We propose that the 2 species responsible for CL in this area are L. major and L. tropica. Further investigations to identify the leishmanial species responsible for CL at Al-jabal Al-gharbi together with adoption of preventive and control programs are needed.

  20. An Epidemiological Study of Cutaneous Leishmaniasis in Al-Jabal Al-Gharbi, Libya

    PubMed Central

    Abdellatif, Manal Z. M.; El-Mabrouk, Khamis

    2013-01-01

    Cutaneous leishmaniasis (CL) is an endemic parasitic infection in the Mediterranean region, including Libya and its Al-jabal Al-gharbi province. We aimed at studying the occupational relevance as well as other epidemiological aspects of CL. We investigated 140 CL cases who attended at Gharyan outpatient polyclinic during a period of 6 months in 2009. CL infection was clinically diagnosed and confirmed by demonstration of Leishmania parasites on smears from lesions. Our findings showed that males were more affected than females (P=0.04), and people above 10-years were more affected than younger ones (P=0.0001). A significant percent of CL cases belonged to Al-Kawasem subprovince (P=0.0001). Farm-related activities were the most frequent occupations among CL cases (P=0.04). In addition to farm workers, housewives and students are at risk groups since they are engaged at farm activities. Moreover, those who have occupations that require staying outdoors for a part of night, e.g., policemen, are also at risk. Compared to children, adult CL patients had multiple lesions (P=0.001) that were more prevalent in their upper and lower extremities than the face (P=0.0001). We conclude that CL is a major health problem in Al-jabal Al-gharbi province of Libya. The presence of rodents and sandflies makes it a suitable environment for Leishmania to spread in an endemic epidemiological pattern. Being engaged in farming activities or outdoor occupations increases the risk of infection. Various clinical patterns of CL suggest the presence of more than 1 species of Leishmania at Al-jabal Al-gharbi province. We propose that the 2 species responsible for CL in this area are L. major and L. tropica. Further investigations to identify the leishmanial species responsible for CL at Al-jabal Al-gharbi together with adoption of preventive and control programs are needed. PMID:23467624

  1. Del Norte means north to recycling

    SciTech Connect

    Aquino, J.T.

    1998-06-01

    Del Norte Regional Recycling and Transfer Station is owned by the city of Oxnard, California and operated by BLT Enterprises, Inc. The Del Norte facility--located in southwestern Ventura County about an hour northwest of Los Angeles--processes polyethylene terephthalate (PET) and high-density polyethylene (HDPE) plastic containers, aluminum, steel, glass, old corrugated containers (OCC), newspapers, computer printout paper, white and colored ledger paper, coated book, supermix paper, telephone books, and old magazines. According to the company, there has been virtually no community opposition to the site. The facility has few neighbors, and those are agricultural. To keep the community relationship strong, the facility`s design and location all but eliminated odor and noise complaints. The building was designed against the prevailing wind pattern, and BLT processes odorous material fast. A misting system installed for dust suppression also can be used with a solution for odor control should the need arise.

  2. Solidification processing of intermetallic Nb-Al alloys

    NASA Technical Reports Server (NTRS)

    Smith, Preston P.; Oliver, Ben F.; Noebe, Ronald D.

    1992-01-01

    Several Nb-Al alloys, including single-phase NbAl3 and the eutectic of Nb2Al and NbAl3, were prepared either by nonconsumable arc melting in Ar or by zone processing in He following initial induction melting and rod casting, and the effect of the solidification route on the microstructure and room-temperature mechanical properties of these alloys was investigated. Automated control procedures and melt conditions for directional solidification of NbAl3 and the Nb2Al/Nb3Al eutectic were developed; high purity and stoichiometry were obtained. The effects of ternary additions of Ti and Ni are described.

  3. Revisiting Deng et al.'s Multiparty Quantum Secret Sharing Protocol

    NASA Astrophysics Data System (ADS)

    Hwang, Tzonelih; Hwang, Cheng-Chieh; Yang, Chun-Wei; Li, Chuan-Ming

    2011-09-01

    The multiparty quantum secret sharing protocol [Deng et al. in Chin. Phys. Lett. 23: 1084-1087, 2006] is revisited in this study. It is found that the performance of Deng et al.'s protocol can be much improved by using the techniques of block-transmission and decoy single photons. As a result, the qubit efficiency is improved 2.4 times and only one classical communication, a public discussion, and two quantum communications between each agent and the secret holder are needed rather than n classical communications, n public discussions, and 3n/2 quantum communications required in the original scheme.

  4. Ferromagnetic ordering in NpAl2: Magnetic susceptibility and 27Al nuclear magnetic resonance

    NASA Astrophysics Data System (ADS)

    Martel, L.; Griveau, J.-C.; Eloirdi, R.; Selfslag, C.; Colineau, E.; Caciuffo, R.

    2015-08-01

    We report on the magnetic properties of the neptunium based ferromagnetic compound NpAl2. We used magnetization measurements and 27Al NMR spectroscopy to access magnetic features related to the paramagnetic and ordered states (TC=56 K). While very precise DC SQUID magnetization measurements confirm ferromagnetic ordering, they show a relatively small hysteresis loop at 5 K reduced with a coercive field HCo~3000 Oe. The variable offset cumulative spectra (VOCS) acquired in the paramagnetic state show a high sensitivity of the 27Al nuclei spectral parameters (Knight shifts and line broadening) to the ferromagnetic ordering, even at room temperature.

  5. Al-based metal matrix composites reinforced with nanocrystalline Al-Ti-Ni particles

    NASA Astrophysics Data System (ADS)

    Scudino, S.; Ali, F.; Surreddi, K. B.; Prashanth, K. G.; Sakaliyska, M.; Eckert, J.

    2010-07-01

    Al-based metal matrix composites containing different volume fractions of nanocrystalline Al70Ti20Ni10 reinforcing particles have been produced by powder metallurgy and the effect of the volume fraction of reinforcement on the mechanical properties of the composites has been studied. Room temperature compression tests reveal a considerable improvement of the mechanical properties as compared to pure Aluminum. The compressive strength increases from 155 MPa for pure Al to about 200 and 240 MPa for the samples with 20 and 40 vol.% of reinforcement, respectively, while retaining appreciable plastic deformation with a fracture strain ranging between 43 and 28 %.

  6. Procesamiento Digital de Imagenes del Cometa Halley

    NASA Astrophysics Data System (ADS)

    Ferrin, L.; Fuenmayor, F.; Naranjo, O.; Bulka, P.; Mendoza, C.

    1987-05-01

    Se reportan observaciones fotográficas del cometa Halley, obtenidas con los telescopios Schmidt de 1-m del CIDA, y de 35 cms de la ULA. Se hicieron exposiciones desde 2 segundos a 30 minutos y se utilizaron emulsiones IIa-O, 103a-F, y 103a-D, guladas manualmente 0 automaticámente. Las imágenes fueron digitalizadas con el microdensitómetro PDS, y procesadas con el sistema HACIENDA del CCIBM. Se experimentó con la Transformada de Fourier en dos dimensiones, y con la aplicación de filtros de paso alto y bajo. Se encontró que el metodo de "autocorrelación" es el mejor para separar "la vegetación" de "la montaña". Se aplicaron diversas técnicas a fin de cubrir ambos extremos: a) enfatizar detalles débiles en la cola, y b) penetrar en las regiones más intensas de la coma. Se lograron ambos objetivos. Detalles en la cola permitieron determinar velocidades de propagación de unos 50 a 90 kms/ seg. Se pudieron detectar no menos de tres perturbaciones en "Y", y una en 5? Co de Cisne). Se cree que las primeras están asociadas a eventos de desconexión. Se puede separar la cola de gas de la de polvo. Las fotos de color permiten enfatizar diferentes regiones espectrales con mayor claridad aún. El "balance" del color puede ser hecho con la computadora.

  7. Gate length scaling effect on high-electron mobility transistors devices using AlGaN/GaN and AlInN/AlN/GaN heterostructures.

    PubMed

    Liao, S Y; Lu, C C; Chang, T; Huang, C F; Cheng, C H; Chang, L B

    2014-08-01

    Compared to AlGaN/GaN HEMT with 0.15 μm T-gate length, the AlInN/AlN/GaN one exhibits much higher current density and transconductance of 1558 mA/mm at Vd = 2 V and 330 mS/mm, respectively. The high extrinsic ft and fmax of 82 GHz and 70 GHz are extracted from AlInN/AlN/GaN HEMT. Besides, we find that the transconductance roll-off is significant in AlGaN/GaN, but largely improved in AlInN/AlN/GaN HEMT, suggesting that the high carrier density and lattice-matched epitaxial heterostructure is important to reach both large RF output power and high operation frequency, especially for an aggressively gate length scaling.

  8. del, Einstein, Mach, Gamow, and Lanczos: Gödel's remarkable excursion into cosmology

    NASA Astrophysics Data System (ADS)

    Rindler, Wolfgang

    2009-06-01

    This article is an expanded version of a talk given at the International Symposium Celebrating the 100th Birthday of Kurt Gödel (Vienna, 2006). It seeks to trace the path which led this preeminent mathematical logician to discover one of the famous results of General Relativity, the rotating Gödel Universe. This universe has some remarkable properties, which gave the philosophers plenty to worry about. It allows a person to travel into his own past, with all the ensuing causal paradoxes; it allows no unique temporal ordering of events; and though Gödel's Universe is rigid and infinite, the Foucault pendulum planes everywhere in it rotate in unison, a clear affront to adherents of Mach's Principle. We also discuss some lesser known precursors in the field, who just missed discovering Gödel's universe. While the article gives all the necessary derivations in simplified form (for example, of the metric and its geodesics), much of it should be accessible to the general reader, who can simply skip most of the mathematics. [Reprinted, with permission, from Kurt Gödel and the Foundations of Mathematics: Horizons of Truth, edited by Matthias Baaz, Christos H. Papadimitriou, Dana S. Scott, Hilary Putnam, and Charles L. Harper, Jr. (Cambridge U. P., New York, 2009).

  9. Visualization of the Gödel universe

    NASA Astrophysics Data System (ADS)

    Buser, M.; Kajari, E.; Schleich, W. P.

    2013-01-01

    The standard model of modern cosmology, which is based on the Friedmann-Lemaître-Robertson-Walker metric, allows the definition of an absolute time. However, there exist (cosmological) models consistent with the theory of general relativity for which such a definition cannot be given since they offer the possibility for time travel. The simplest of these models is the cosmological solution discovered by Kurt Gödel, which describes a homogeneous, rotating universe. Disregarding the paradoxes that come along with the abolishment of causality in such space-times, we are interested in the purely academic question of how an observer would visually perceive the time travel of an object in Gödel's universe. For this purpose, we employ the technique of ray tracing, a standard tool in computer graphics, and visualize various scenarios to bring out the optical effects experienced by an observer located in this universe. In this way, we provide a new perspective on the space-time structure of Gödel's model.

  10. DISYUNTIVAS EN LAS CONCEPCIONES SOBRE AUTONOMÍA Y BENEFICENCIA QUE AFECTAN LA TERAPÉUTICA DEL INTENTO SUICIDA.

    PubMed

    Mondragón, Liliana; Monroy, Zuraya; Ito, Ma Emily; Medina-Mora, Dra Ma Elena

    2010-06-01

    El objetivo del trabajo es conocer las disyuntivas entre los principios de beneficencia y autonomía, que se presentan en la relación médico-paciente, durante la terapéutica del intento de suicidio.La investigación se realizó en dos hospitales psiquiátricos de la Ciudad de México. La muestra incluyó a tres sujetos con intento de suicidio, mayores de 18 años, que eran atendidos en consulta externa a causa de una lesión autoinfligida en el último año, y a tres psiquiatras que trataban a estos pacientes. La información se obtuvo previo consentimiento informado en entrevistas individuales. Se llevó a cabo un análisis de discurso argumentado para encontrar los significados que los participantes otorgaron a los principios bioéticos y las posibles disyuntivas entre éstos.Las discordancias entre la beneficencia y la autonomía estuvieron relacionadas con el beneficio del tratamiento, el respeto por los valores y las creencias de los pacientes, entre otros. Este trabajo presenta consideraciones éticas relevantes en el escenario clínico, al ofrecer al psiquiatra un análisis bioético que le permita actuar de acuerdo con la beneficencia y respetando la autonomía del paciente frente a casos de intento de suicidio y, de esta forma procurar una mejor atención para ellos.

  11. DISYUNTIVAS EN LAS CONCEPCIONES SOBRE AUTONOMÍA Y BENEFICENCIA QUE AFECTAN LA TERAPÉUTICA DEL INTENTO SUICIDA.

    PubMed

    Mondragón, Liliana; Monroy, Zuraya; Ito, Ma Emily; Medina-Mora, Dra Ma Elena

    2010-06-01

    El objetivo del trabajo es conocer las disyuntivas entre los principios de beneficencia y autonomía, que se presentan en la relación médico-paciente, durante la terapéutica del intento de suicidio.La investigación se realizó en dos hospitales psiquiátricos de la Ciudad de México. La muestra incluyó a tres sujetos con intento de suicidio, mayores de 18 años, que eran atendidos en consulta externa a causa de una lesión autoinfligida en el último año, y a tres psiquiatras que trataban a estos pacientes. La información se obtuvo previo consentimiento informado en entrevistas individuales. Se llevó a cabo un análisis de discurso argumentado para encontrar los significados que los participantes otorgaron a los principios bioéticos y las posibles disyuntivas entre éstos.Las discordancias entre la beneficencia y la autonomía estuvieron relacionadas con el beneficio del tratamiento, el respeto por los valores y las creencias de los pacientes, entre otros. Este trabajo presenta consideraciones éticas relevantes en el escenario clínico, al ofrecer al psiquiatra un análisis bioético que le permita actuar de acuerdo con la beneficencia y respetando la autonomía del paciente frente a casos de intento de suicidio y, de esta forma procurar una mejor atención para ellos. PMID:20830214

  12. DISYUNTIVAS EN LAS CONCEPCIONES SOBRE AUTONOMÍA Y BENEFICENCIA QUE AFECTAN LA TERAPÉUTICA DEL INTENTO SUICIDA1

    PubMed Central

    Mondragón, Liliana; Monroy, Zuraya; Ito, Ma. Emily; Medina-Mora, Dra. Ma. Elena

    2010-01-01

    El objetivo del trabajo es conocer las disyuntivas entre los principios de beneficencia y autonomía, que se presentan en la relación médico-paciente, durante la terapéutica del intento de suicidio. La investigación se realizó en dos hospitales psiquiátricos de la Ciudad de México. La muestra incluyó a tres sujetos con intento de suicidio, mayores de 18 años, que eran atendidos en consulta externa a causa de una lesión autoinfligida en el último año, y a tres psiquiatras que trataban a estos pacientes. La información se obtuvo previo consentimiento informado en entrevistas individuales. Se llevó a cabo un análisis de discurso argumentado para encontrar los significados que los participantes otorgaron a los principios bioéticos y las posibles disyuntivas entre éstos. Las discordancias entre la beneficencia y la autonomía estuvieron relacionadas con el beneficio del tratamiento, el respeto por los valores y las creencias de los pacientes, entre otros. Este trabajo presenta consideraciones éticas relevantes en el escenario clínico, al ofrecer al psiquiatra un análisis bioético que le permita actuar de acuerdo con la beneficencia y respetando la autonomía del paciente frente a casos de intento de suicidio y, de esta forma procurar una mejor atención para ellos. PMID:20830214

  13. Self-Separation of Sublimation-Grown AlN with AlSiN Buffer Layer

    NASA Astrophysics Data System (ADS)

    Nishino, Katsushi; Nakauchi, Jun; Hayashi, Kotaro; Tsukihara, Masashi

    2013-08-01

    AlN was grown by a sublimation method on 6H-SiC. We found the grown AlN layer is easily separated from the substrate when Si powder is added to the AlN source powder. The formation of AlSiN layer with the Si content of 15% at the AlN/6H-SiC interface was confirmed by energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD). This AlSiN layer causes the separation of AlN.

  14. Accurate interatomic potentials for Ni, Al and Ni/sub 3/Al

    SciTech Connect

    Voter, A.F.; Chen, Shao Ping

    1986-01-01

    To obtain meaningful results from atomistic simulations of materials, the interatomic potentials must be capable of reproducing the thermodynamic properties of the system of interest. Pairwise potentials have known deficiencies that make them unsuitable for quantitative investigations of defective regions such as crack tips and free surfaces. Daw and Baskes (Phys. Rev. B 29, 6443 (1984)) have shown that including a local ''volume'' term for each atom gives the necessary many-body character without the severe computational dependence of explicit n-body potential terms. Using a similar approach, we have fit an interatomic potential to the Ni/sub 3/Al alloy system. This potential can treat diatomic Ni/sub 2/, diatomic Al/sub 2/, fcc Ni, fcc Al and L1/sub 2/ Ni/sub 3/Al on an equal footing. Details of the fitting procedure are presented, along with the calculation of some properties not included in the fit.

  15. 'Abd al-Rahman al-Sufi's 3-Step Magnitude System

    NASA Astrophysics Data System (ADS)

    Hafez, Ihsan; Stephenson, F. Richard; Orchiston, Wayne

    'Abd al-Rahmān al-ūfī's Book of the Fixed Stars dates from around AD 964 and is one of the most important medieval Arabic treatises on astronomy. In this paper we begin with a very brief introduction to the Book of the Fixed Stars. This book contains an extensive star catalogue that lists star coordinates and magnitude estimates for all of the Ptolemaic stars. However, in his book al-hūfī utilized three distinct intermediate magnitude values whereas Ptolemy only mentioned two. We believe that al-hūfī used what we have termed a '3-step intermediate magnitude system,' which is more accurate than Ptolemy's 2-step intermediate system. In this paper we examine in detail the accuracy of this unique 3-step system in comparison with Ptolemy's and modern magnitude values.

  16. Interdiffusion in the Mg-Al system and Intrinsic Diffusion in (Al3Mg2) Phase

    SciTech Connect

    Brennan, Sarah; Bermudez, Katrina; Kulkarni, Nagraj S; Sohn, Yong Ho

    2011-01-01

    Increasing use and development of lightweight Mg-alloys have led to the desire for more fundamental research in and understanding of Mg-based systems. As a strengthening component, Al is one of the most important and common alloying elements for Mg-alloys. In this study, solid-to-solid diffusion couple techniques were employed to examine the interdiffusion between pure Mg and Al. Diffusion anneals were carried out at 300 , 350 , and 400 C for 720, 360, and 240 hours, respectively. Optical and scanning electron microscopies (SEM) were employed to observe the formation of the intermetallics -Al12Mg17 and -Al3Mg2, but not -phase. Concentration profiles were determined using X-ray energy dispersive spectroscopy (XEDS). The growth constants and activation energies were determined for each intermetallic phase.

  17. Fabrication of Fe-Al nanoparticles by selective oxidation of Fe-Al thin films

    NASA Astrophysics Data System (ADS)

    Jang, Pyungwoo; Shin, Seungchan; Jung, Chip-Sup; Kim, Kwang-Ho; Seomoon, Kyu

    2013-04-01

    The possibility of a new technique for fabricating nanoparticles from thin films using selective oxidation in an atmosphere mixture of water vapor and hydrogen was investigated. Fe-5wt.%Al films were RF-sputtered and annealed in the atmosphere mixture at 900°C for up to 200 min, in order to oxidize aluminum selectively. Thermodynamics simulation showed that temperatures exceeding 800°C are necessary to prevent iron from being oxidized, as confirmed by the depth profile of XPS. As the annealing time increased, the morphology of the 200-nm Fe-Al films changed from the continuous to the discontinuous type; thus, particulate Fe-Al films formed after 100 min. The particulate 10- to 100-nm Fe-Al films showed super-paramagnetic behavior after the oxidation. Thus, a new technique for fabricating nanoparticles was successfully introduced using selective oxidation.

  18. Synthesis and characterization of Al-Zn/Al2O3 nano-powder composites.

    PubMed

    Durai, T G; Das, Karabi; Das, Siddhartha

    2007-06-01

    Composites consisting of Al-Zn/Al2O3 have been synthesized using high energy mechanical milling. High energy ball milling increases the sintering rate of the composite powder due to increased diffusion rate. Owing to the finer microstructure, the hardness of the sintered composite produced by using the mechanically milled nanocomposite powder is significantly higher than that of the sintered composite produced by using the as-mixed powder. The mean crystallite size of the matrix has been determined to be 27 nm by Scherrer equation using X-ray diffraction data. The powders have been characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and differential thermal analysis (DTA). The effect of high-energy ball milling and subsequent annealing on a mixture of Al and ZnO has also been investigated. DTA result show that the reaction temperature of Al-ZnO decreases with the increase in the ball milling time.

  19. Rechargeable Al/Cl2 battery with molten AlCl4/-/ electrolyte.

    NASA Technical Reports Server (NTRS)

    Holleck, G. L.; Giner, J.; Burrows, B.

    1972-01-01

    A molten salt system based on Al- and Cl2 carbon electrodes, with an AlCl3 alkali chloride eutectic as electrolyte, offers promise as a rechargeable, high energy density battery which can operate at a relatively low temperature. Electrode kinetic studies showed that the electrode reactions at the Al anode were rapid and that the observed passivation phenomena were due to the formation at the electrode surface of a solid salt layer resulting from concentration changes on anodic or cathodic current flow. It was established that carbon electrodes were intrinsically active for chlorine reduction in AlCl3-alkali chloride melts. By means of a rotating vitreous carbon disk electrode, the kinetic parameters were determined.

  20. Differentiation of Al3+ and Al species in environmental samples by isotachophoresis.

    PubMed

    Schmid, S; Kördel, W; Klöppel, H; Klein, W

    1989-05-24

    An isotachophoretic method for the determination of free [Al(H2O)6]3+ ions in different aluminium salt solutions was developed. The electrolyte system consists of 0.01 M sodium acetate (leading system) and 0.01 M tris(hydroxymethyl)amino-methane (terminating system). Separation was effected with a precapillary tube (diameter 0.05 cm) followed by a main capillary tube of length 20 cm and of smaller cross-section. The detection limit for [Al(H2O)6]3+ ions was 0.05 mg/l. The method was applied to the determination of free Al3+ ions ([Al(H2O)6]3+) in soil leachates and aqueous soil extracts.

  1. Fabrication and properties of functionally graded NiAl/Al2O3 composites

    NASA Technical Reports Server (NTRS)

    Miller, D. P.; Lannutti, J. J.; Noebe, R. D.

    1993-01-01

    A modified sedimentation process was used in the production of a functionally gradient material (FGM), NiAl/Al2O3. A simple finite element model was used to guide our design and fabrication efforts by estimating residual stress states as a function of composite structure. This approach could lead to tailored designs that enhance or avoid specific residual stress states. Thermal cycling tests were factored into the model to predict time dependent or steady-state internal temperature and stress profiles. Four-point bend tests were conducted to establish the mechanical load-displacement behavior of a single interlayer FGM at room temperature, 800 and 1000 K. Room temperature bend strength of the FGM was 3-4 times that of the base NiAl. At elevated temperatures, composite fracture occurred in a gradual, noncatastrophic mode involving NiAl retardation of a succession of cracks originating in the alumina face.

  2. Characterization of Al30 in commercial poly-aluminum chlorohydrate by solid-state (27)Al NMR spectroscopy.

    PubMed

    Phillips, Brian L; Vaughn, John S; Smart, Scott; Pan, Long

    2016-08-15

    Investigation of commercially produced hydrolysis salts of aluminum by solid-state (27)Al NMR spectroscopy and size-exclusion chromatography (SEC) reveals well-defined and distinct Al environments that can be related to physicochemical properties. (27)Al MAS and MQ-MAS NMR spectroscopic data show that the local structure of the solids is dominated by moieties that closely resemble the Al30 polyoxocation (Al30O8(OH)56(H2O)26(18+)), accounting for 72-85% of the total Al. These Al30-like clusters elute as several size fractions by SEC. Comparison of the SEC and NMR results indicates that the Al30-like clusters includes intact isolated clusters, moieties of larger polymers or aggregates, and possibly fragments resembling δ-Al13 Keggin clusters. The coagulation efficacy of the solids appears to correlate best with the abundance of intact Al30-like clusters and of smaller species available to promote condensation reactions. PMID:27232539

  3. Correlation between Al grain size, grain boundary grooves and local variations in oxide barrier thickness of Al/AlOx/Al tunnel junctions by transmission electron microscopy.

    PubMed

    Nik, Samira; Krantz, Philip; Zeng, Lunjie; Greibe, Tine; Pettersson, Henrik; Gustafsson, Stefan; Delsing, Per; Olsson, Eva

    2016-01-01

    A thickness variation of only one Ångström makes a significant difference in the current through a tunnel junction due to the exponential thickness dependence of the current. It is thus important to achieve a uniform thickness along the barrier to enhance, for example, the sensitivity and speed of single electron transistors based on the tunnel junctions. Here, we have observed that grooves at Al grain boundaries are associated with a local increase of tunnel barrier thickness. The uniformity of the barrier thickness along the tunnel junction thus increases with increasing Al grain size. We have studied the effect of oxidation time, partial oxygen pressure and also temperature during film growth on the grain size. The implications are that the uniformity improves with higher temperature during film growth. PMID:27462515

  4. Forging of FeAl intermetallic compounds

    SciTech Connect

    Flores, O.; Juarez, J.; Campillo, B.; Martinez, L.; Schneibel, J.H.

    1994-09-01

    Much activity has been concentrated on the development of intermetallic compounds with the aim of improving tensile ductility, fracture toughness and high notch sensitivity in order to develop an attractive combination of properties for high and low temperature applications. This paper reports experience in processing and forging of FeAl intermetallic of B2 type. During the experiments two different temperatures were employed, and the specimens were forged after annealing in air, 10{sup {minus}2} torr vacuum and argon. From the results it was learned that annealing FeAl in argon atmosphere prior to forging resulted in better deformation behavior than for the other two environments. For the higher forging temperature used in the experiments (700C), the as-cast microstructure becomes partially recrystallized.

  5. Ni{sub 3}Al technology transfer

    SciTech Connect

    Sikka, V.K.; Viswanathan, S.; Santella, M.L.

    1997-04-01

    Ductile Ni{sub 3}Al and Ni{sub 3}Al-based alloys have been identified for a range of applications. These applications require the use of material in a variety of product forms such as sheet, plate, bar, wire, tubing, piping, and castings. Although significant progress has been made in the melting, casting, and near-net-shape forming of nickel aluminides, some issues still remain. These include the need for: (1) high-strength castable composition for many applications that have been identified; (2) castability (mold type, fluidity, hot-shortness, porosity, etc.); (3) weld reparability of castings; and (4) workability of cast or powder metallurgy product to sheet, bar, and wire. The four issues listed above can be {open_quotes}show stoppers{close_quotes} for the commercial application of nickel aluminides. This report describes the work completed to address some of these issues during FY 1996.

  6. Observable Proxies For 26 Al Enhancement

    SciTech Connect

    Fryer, Christopher L; Young, Patrick A; Ellinger, Carola I; Arnett, William D

    2008-01-01

    We consider the cospatial production of elements in supernova explosions to find observationally detectable proxies for enhancement of {sup 26}Al in supernova ejecta and stellar systems. Using four progenitors we explore a range of 1D explosions at different energies and an asymmetric 3D explosion. We find that the most reliable indicator of the presence of {sup 26}Al in unmixed ejecta is a very low S/Si ratio ({approx} 0.05). Production of N in O/S/Si-rich regions is also indicative. The biologically important element P is produced at its highest abundance in the same regions. Proxies should be detectable in supernova ejecta with high spatial resolution multi wavelength observations, but the small absolute abundance of material injected into a proto-planetary disk makes detection unlikely in existing or forming stellar/planetary systems.

  7. [Communication with ALS patients: neurosurgical approach].

    PubMed

    Yoshimine, Toshiki; Yanagisawa, Takufumi; Sawada, Jin-Ichi; Hazama, Takanori; Mochizuki, Hideki; Hirata, Masayuki

    2013-01-01

    By progression of the disease, motor neurons degenerate in patients with amyotrophic lateral sclerosis (ALS) eventually lose nearly all voluntary muscles in the body. They are awake and aware but cannot move or communicate (locked-in state). Since the function of the brain is preserved, one possible measure to support their communication is to interpret their motor intention by decoding (deciphering) brain signals and present it with external devices. This technology called "brain-machine interface (BMI)" is now close to clinical use in Japan and USA.In our system, we record electrocorticogram (ECoG) obtained with subudural electrodes during their motor imagery, decode it and determine the movement they intended. So far, one patient of ALS with severe paralysis, implanted with this electrodes, successfully operated the PC communication tool only by thinking.

  8. Ni{sub 3}Al technology transfer

    SciTech Connect

    Sikka, V.K.; Santella, M.L.; Alexander, D.J.

    1995-05-01

    Ductile Ni{sub 3}Al and Ni{sub 3}Al-based alloys have been identified for a range of applications. These applications require the use of material in a variety of product forms such as sheet, plate, bar, tubing, piping, and castings. Although significant progress has been made in the melting, casting, and near-net-shape forming of nickel aluminides, some issues still remain. These include the need for (1)high-strength castable composition for turbochargers, furnace furniture, and hot-die applications; (2) castability (fluidity, hot-shortness, porosity, etc.); (3) weld reparability of castings; and (4) hot fabricability of cast ingots. All of the issues listed above can be {open_quotes}show stoppers{close_quotes} for the commercial application of nickel aluminides. This report describes work completed to address some of these issues during the fourth quarter of FY 1994.

  9. Development of SiAlON materials

    NASA Technical Reports Server (NTRS)

    Layden, G. K.

    1979-01-01

    Cold pressing and sintering techniques were used to produce ceramic test specimens in which the major phase was either Si3N4 or a solid solution having the beta Si3N4 structure. Additional components were incorporated to promote liquid phase sintering. Glass and/or crystalline phase were consequently retained in boundaries between Si3N4 grains which largely determined the physical properties of the bodies. Systems investigated most extensively included R-Si-Al-O-N (R = rare earth element) Zr-Si-Al-O-N, Y-Si-Be-O-N, and R1-R2-Si-O-N. Room temperature and 1370 C modulus of ruptured, 1370 C creep, and oxidation behavior are discussed in terms of phase relationships in a parent quinery, and relavent oxide systems.

  10. Morphology, geology and geochemistry of the "Salar del Gran Bajo del Gualicho" (Rio Negro, Argentina)

    USGS Publications Warehouse

    Angelucci, A.; Barbieri, M.; Brodtkorb, A.; Ciccacci, S.; Civitelli, G.; De Barrio, R.; Di, Filippo M.; Fredi, P.; Friedman, I.; Lombardi, S.; Schalamuk, A.I.; Toro, B.

    1996-01-01

    A multidisciplinary study of the Gran Bajo del Gualicho area (Rio Negro - Argentina) was carried out; the aim was to delineate its geological and geomorphological evolution and to estabilish the genesis of salts filling the depression. Climatic conditions were analized first to individuate their role in the present morphogenetic processes; moreover the main morphological features of present landscape were examined as well as the stratigraphy of the outcropping formations, and of the Gran Bajo del Gualicho Formation in particular. Finally, a possible geomorphological evolution of the studied area was traced. Geophysical analyses allowed to estabilish that the paleosurface shaped on the crystalline basement is strongly uneven and shows evidence of the strong tectonic phases it underwent. The result of isotope analyses confirmed that the salt deposits on the Gran Bajo del Gualicho bottom were produced by fresh water evaporation, while strontium isotope ratio suggested that such waters were responsible for solubilization of more ancient evaporitic deposits.

  11. Response to de la Iglesia et al.

    PubMed

    Yetish, Gandhi; Kaplan, Hillard; Gurven, Michael; Wood, Brian; Pontzer, Herman; Manger, Paul R; Wilson, Charles; McGregor, Ronald; Siegel, Jerome M

    2016-04-01

    We wish to respond to the commentary of de la Iglesia et al. [1]. Studies comparing sleep in different communities have different goals. One frequent goal has been to determine how sleep is affected by manipulating specific 'modern' conditions. Many studies have investigated the effect of artificial light and electronic entertainment. Such studies have clearly shown that light, particularly blue light, delays sleep onset [2]. Studying the effect of artificial light on sleep was not a goal of our study.

  12. Psychosocial adjustment to ALS: a longitudinal study

    PubMed Central

    Matuz, Tamara; Birbaumer, Niels; Hautzinger, Martin; Kübler, Andrea

    2015-01-01

    For the current study the Lazarian stress-coping theory and the appendant model of psychosocial adjustment to chronic illness and disabilities (Pakenham, 1999) has shaped the foundation for identifying determinants of adjustment to ALS. We aimed to investigate the evolution of psychosocial adjustment to ALS and to determine its long-term predictors. A longitudinal study design with four measurement time points was therefore, used to assess patients' quality of life, depression, and stress-coping model related aspects, such as illness characteristics, social support, cognitive appraisals, and coping strategies during a period of 2 years. Regression analyses revealed that 55% of the variance of severity of depressive symptoms and 47% of the variance in quality of life at T2 was accounted for by all the T1 predictor variables taken together. On the level of individual contributions, protective buffering, and appraisal of own coping potential accounted for a significant percentage in the variance in severity of depressive symptoms, whereas problem management coping strategies explained variance in quality of life scores. Illness characteristics at T2 did not explain any variance of both adjustment outcomes. Overall, the pattern of the longitudinal results indicated stable depressive symptoms and quality of life indices reflecting a successful adjustment to the disease across four measurement time points during a period of about two years. Empirical evidence is provided for the predictive value of social support, cognitive appraisals, and coping strategies, but not illness parameters such as severity and duration for adaptation to ALS. The current study contributes to a better conceptualization of adjustment, allowing us to provide evidence-based support beyond medical and physical intervention for people with ALS. PMID:26441696

  13. Errores fotométricos debido al uso del filtro anular de mediana en imágenes CCD

    NASA Astrophysics Data System (ADS)

    Gil-Hutton, R.; Cañada, M.; Noel, N.

    El filtro anular de mediana tiene la importante propiedad de tener una escala claramente definida, lo que permite remover de una imagen CCD todos los objetos con tamaños menores a esta escala, independientemente de su morfología particular, y reemplazarlos por el correspondiente ``background" local. Este filtro es de gran utilidad para remover gradientes de fondo, ``fringing" y halos de objetos extendidos mediante el simple procedimiento de restar a la imagen original una imagen filtrada, repitiendo el proceso las veces que sea necesario. En este trabajo se presentan resultados sobre los errores que introduce este filtro en la fotometría de objetos con diferente relación S/N y su aplicación a imágenes con gradientes de fondo y ``fringing".

  14. Genetic Contribution to the Management of the Potato Crop (Contribucion Genetica al Manejo del Cultivo de la Papa)

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Different varieties of potato display varying responses to biotic and abiotic stresses. Knowing that a variety is resistant or susceptible to these factors can help to minimize economic losses by management. Timely counteraction against such factors by water, chemical application, and storage proc...

  15. The Teletón Centers Of Child Rehabilitation Mexico: 'El amor y la ciencia al servicio del hombre'.

    PubMed

    Carbajal, Alejandro Parodi

    2008-07-01

    This paper describes the foundation and distribution of the Teleton and Oritel networks of rehabilitation. An essential component of the Pan-American network, as reported by Dr. Jorge Hernandez Franco, Teleton follows a humanistic perspective in offering a comprehensive biopsychosocial model of therapy and care. Public engagement is central to the success of Teleton and highlights the importance of increasing public understanding of rehabilitation needs and service delivery.

  16. Prevalencia y Consecuencias del Abuso Sexual al Menor en Espana (Prevalence and Consequences of Child Sexual Abuse in Spain).

    ERIC Educational Resources Information Center

    Lopez, Felix; And Others

    1995-01-01

    The prevalence and effects of child sexual abuse in Spain were studied, using interview and survey responses from 1,821 individuals. Results indicated a high prevalence of sexual abuse prior to age 17 (15 percent of males and 22 percent of females) and a number of short-term and long-term effects, including a tendency toward mental health…

  17. A comparative wear study on Al-Li and Al-Li/SiC composite

    SciTech Connect

    Okumus, S. Cem Karslioglu, Ramazan Akbulut, Hatem

    2013-12-16

    Aluminum-lithium based unreinforced (Al-8090) alloy and Al-8090/SiCp/17 vol.% metal matrix composite produced by extrusion after spray co-deposition. A dry ball-on disk wear test was carried out for both alloy and composite. The tests were performed against an Al{sub 2}O{sub 3} ball, 10 mm in diameter, at room temperature and in laboratory air conditions with a relative humidity of 40-60%. Sliding speed was chosen as 1.0 ms{sup −1} and normal loads of 1.0, 3.0 and 5.0 N were employed at a constant sliding distance of 1000 m. The wear damage on the specimens was evaluated via measurement of wear depth and diameter. Microstructural and wear characterization was carried out via scanning electron microscopy (SEM). The results showed that wear loss of the Al-8090/SiC composite was less than that of the Al-8090 matrix alloy. Plastic deformation observed on the wear surface of the composite and the matrix alloy, and the higher the applied load the greater the plastic deformation. Scanning electron microscopy examinations of wear tracks also reveal that delamination fracture was the dominant wear mechanism during the wear progression. Friction coefficient was maximum at the low applied load in the case of the Al-8090/SiC composite while a gradual increase was observed with applied load for the matrix alloy.

  18. A comparative wear study on Al-Li and Al-Li/SiC composite

    NASA Astrophysics Data System (ADS)

    Okumus, S. Cem; Karslioglu, Ramazan; Akbulut, Hatem

    2013-12-01

    Aluminum-lithium based unreinforced (Al-8090) alloy and Al-8090/SiCp/17 vol.% metal matrix composite produced by extrusion after spray co-deposition. A dry ball-on disk wear test was carried out for both alloy and composite. The tests were performed against an Al2O3 ball, 10 mm in diameter, at room temperature and in laboratory air conditions with a relative humidity of 40-60%. Sliding speed was chosen as 1.0 ms-1 and normal loads of 1.0, 3.0 and 5.0 N were employed at a constant sliding distance of 1000 m. The wear damage on the specimens was evaluated via measurement of wear depth and diameter. Microstructural and wear characterization was carried out via scanning electron microscopy (SEM). The results showed that wear loss of the Al-8090/SiC composite was less than that of the Al-8090 matrix alloy. Plastic deformation observed on the wear surface of the composite and the matrix alloy, and the higher the applied load the greater the plastic deformation. Scanning electron microscopy examinations of wear tracks also reveal that delamination fracture was the dominant wear mechanism during the wear progression. Friction coefficient was maximum at the low applied load in the case of the Al-8090/SiC composite while a gradual increase was observed with applied load for the matrix alloy.

  19. Room Temperature Radiolytic Synthesized Cu@CuAlO2-Al2O3 Nanoparticles

    PubMed Central

    Abedini, Alam; Saion, Elias; Larki, Farhad; Zakaria, Azmi; Noroozi, Monir; Soltani, Nayereh

    2012-01-01

    Colloidal Cu@CuAlO2-Al2O3 bimetallic nanoparticles were prepared by a gamma irradiation method in an aqueous system in the presence of polyvinyl pyrrolidone (PVP) and isopropanol respectively as a colloidal stabilizer and scavenger of hydrogen and hydroxyl radicals. The gamma irradiation was carried out in a 60Co gamma source chamber with different doses up to 120 kGy. The formation of Cu@CuAlO2-Al2O3 nanoparticles was observed initially by the change in color of the colloidal samples from colorless to brown. Fourier transform infrared spectroscopy (FTIR) confirmed the presence of bonds between polymer chains and the metal surface at all radiation doses. Results of transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDX), and X-ray diffraction (XRD) showed that Cu@CuAlO2-Al2O3 nanoparticles are in a core-shell structure. By controlling the absorbed dose and precursor concentration, nanoclusters with different particle sizes were obtained. The average particle diameter increased with increased precursor concentration and decreased with increased dose. This is due to the competition between nucleation, growth, and aggregation processes in the formation of nanoclusters during irradiation. PMID:23109893

  20. Room temperature radiolytic synthesized Cu@CuAlO(2)-Al(2)O(3) nanoparticles.

    PubMed

    Abedini, Alam; Saion, Elias; Larki, Farhad; Zakaria, Azmi; Noroozi, Monir; Soltani, Nayereh

    2012-01-01

    Colloidal Cu@CuAlO(2)-Al(2)O(3) bimetallic nanoparticles were prepared by a gamma irradiation method in an aqueous system in the presence of polyvinyl pyrrolidone (PVP) and isopropanol respectively as a colloidal stabilizer and scavenger of hydrogen and hydroxyl radicals. The gamma irradiation was carried out in a (60)Co gamma source chamber with different doses up to 120 kGy. The formation of Cu@CuAlO(2)-Al(2)O(3) nanoparticles was observed initially by the change in color of the colloidal samples from colorless to brown. Fourier transform infrared spectroscopy (FTIR) confirmed the presence of bonds between polymer chains and the metal surface at all radiation doses. Results of transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDX), and X-ray diffraction (XRD) showed that Cu@CuAlO(2)-Al(2)O(3) nanoparticles are in a core-shell structure. By controlling the absorbed dose and precursor concentration, nanoclusters with different particle sizes were obtained. The average particle diameter increased with increased precursor concentration and decreased with increased dose. This is due to the competition between nucleation, growth, and aggregation processes in the formation of nanoclusters during irradiation. PMID:23109893

  1. FeAl and NbAl3 Intermetallic-HVOF Coatings: Structure and Properties

    NASA Astrophysics Data System (ADS)

    Guilemany, J. M.; Cinca, N.; Dosta, S.; Cano, I. G.

    2009-12-01

    Transition metal aluminides in their coating form are currently being explored in terms of resistance to oxidation and mechanical behavior. This interest in transition metal aluminides is mainly due to the fact that their high Al content makes them attractive for high-temperature applications. This is also a reason to study their resistance to wear; they may be suitable for use in applications that produce a lot of wear in aggressive environments, thus replacing established coating materials. In this study, the microstructure, microhardness, and wear and oxidation performance of FeAl and NbAl3 coatings produced by high-velocity oxy-fuel spraying are evaluated with two main aims: (i) to compare these two coating systems—a commonly studied aluminide (FeAl) and, NbAl3, an aluminide whose deposition by thermal spraying has not been attempted to date—and (ii) to analyze the relationship between their microstructure, composition and properties, and so clarify their wear and oxidation mechanisms. In the present study, the higher hardness of niobium aluminide coatings did not correlate with a higher wear resistance and, finally, although pesting phenomena (disintegration in oxidizing environments) were already known of in bulk niobium aluminides, here their behavior in the coating form is examined. It was shown that such accelerated oxidation was inevitable with respect to the better resistance of FeAl, but further improvements are foreseen by addition of alloying elements in that alloy.

  2. Preparation and characterization of Ppy/Al 2O 3/Al used as a solid-state capacitor

    NASA Astrophysics Data System (ADS)

    Tsai, Ming-Liao; Chen, Pei-Jiun; Do, Jing-Shan

    The characteristics of a solid-state capacitor based on Ppy (polypyrrole)/Al 2O 3/Al prepared by the constant-current method are investigated. The surface composition of aluminum (Al) foil analyzed to by electron spectroscopy for chemical analysis (ESCA) is found to be AlO 2- when the native oxide on the Al foil is etched by 0.1 M NaOH. Three stages are defined from the relationship between the potential and the electrolysis time in simultaneously preparing the dielectric layer (Al 2O 3) and the conducting polymer (Ppy) on Al foil etched with 0.1 M NaOH. The experimental results indicate that only stage one, i.e. the formation of Al 2O 3, occurs in the preparation of Ppy/Al 2O 3/Al at a current density greater than 0.9 mA cm -2. A higher concentration of pyrrole enhances the nucleation of Ppy within the pores of Al 2O 3 such that the period of the first stage decrease and the second stage of the propagation of Ppy is increased. The leakage current of Ppy/Al 2O 3/Al rises from 0.009 to 0.405 μA cm -2 with increase in the concentration of pyrrole in preparing Ppy/Al 2O 3/Al from 0.05 to 0.15 M. Raising the cut-off potential for preparing Ppy/Al 2O 3/Al from 20 to 60 V increases the thickness of Al 2O 3 and lowers the capacity of Ppy/Al 2O 3/Al from 478.5 to 174.2 nF cm -2.

  3. Energetic ion bombarded Fe/Al multilayers

    SciTech Connect

    Al-Busaidy, M.S.; Crapper, M.D.

    2006-05-15

    The utility of ion-assisted deposition is investigated to explore the possibility of counteracting the deficiency of back-reflected current of Ar neutrals in the case of lighter elements such as Al. A range of energetically ion bombarded Fe/Al multilayers sputtered with applied surface bias of 0, -200, or -400 V were deposited onto Si(111) substrates in an argon atmosphere of 4 mTorr using a computer controlled dc magnetron sputtering system. Grazing incidence reflectivity and rocking curve scans by synchrotron x rays of wavelength of 1.38 A were used to investigate the structures of the interfaces produced. Substantial evidence has been gathered to suggest the gradual suppression of interfacial mixing and reduction in interfacial roughness with increases of applied bias. The densification of the Al microstructure was noticeable and may be a consequence of resputtering attributable to the induced ion bombardment. The average interfacial roughnesses were calculated for the 0, -200, and -400 V samples to be 7{+-}0.5, 6{+-}0.5, and 5{+-}0.5 A respectfully demonstrating a 30% improvement in interface quality. Data from rocking curve scans point to improved long-range correlated roughness in energetically deposited samples. The computational code based on the recursive algorithm developed by Parratt [Phys. Rev. 95, 359 (1954)] was successful in the simulation of the specular reflectivity curves.

  4. Diet and dietetics in al-Andalus.

    PubMed

    Salas-Salvadó, Jordi; Huetos-Solano, Maria D; García-Lorda, Pilar; Bulló, Mònica

    2006-08-01

    Al-Andalus society (711-1492) based its idea of health on the wisdom of Classical Greece, the Hippocratic-Galenic theories, as well as the Persian and Hindu cultures. The twelfth century in al-Andalus is considered to be the most prolific period for works of a scientific and technical nature. At the time, the main treatises on dietetics were written and this science reached its widest expression with such leading figures as Ibn Wāfīd, Avenzoar, Averroes and Maimonides, whose works revealed the first scientific knowledge on the nutritional processes of the human body. Diet was regarded as being essential for health and the prevention of disease. Dietary guidelines were written for different age groups, different body types and different seasons of the year. The amount of food to be ingested, the number of meals recommended and the order in which the food should be consumed were all issues that were discussed. A variety of foods were thought to have medicinal properties, some of which are known today. The diet in al-Andalus was varied and very probably made a substantial contribution to the origin of the present-day Mediterranean diet, rich in olive oil, wholemeal cereals, fruit and vegetables, fish, lamb, poultry, nuts and spices. We also find that many of the terms in current use in diet and agriculture are a living testimony to the Arabic influence, as are many of the dishes of our varied Mediterranean gastronomy.

  5. Lower motor neuron dysfunction in ALS.

    PubMed

    de Carvalho, Mamede; Swash, Michael

    2016-07-01

    In the motor system there is a complex interplay between cortical structures and spinal cord lower motor neurons (LMN). In this system both inhibitory and excitatory neurons have relevant roles. LMN loss is a marker of motor neuron disease/amyotrophic lateral sclerosis (MND/ALS). Conventional needle electromyography (EMG) does not allow LMN loss to be quantified. Measurement of compound muscle action potential (CMAP) amplitude or area, and the neurophysiological index, provide a surrogate estimate of the number of functional motor units. Increased motor neuronal excitability is a neurophysiological marker of ALS in the context of a suspected clinical and electrophysiological diagnosis. In the LMN system, fasciculation potentials (FPs) are the earliest changes observed in affected muscles, a feature of LMN hyperexcitability. Reinnervation is best investigated by needle EMG although other methods can be explored. Moreover needle EMG give information about the temporal profile of the reinnervation process, important ancillary data. Quantitative motor unit potential analysis is a valuable method of evaluating reinnervation. The importance of FPs has been recognized in the Awaji criteria for the electrodiagnosis of ALS, criteria that are a sensitive adjunct to the revised El Escorial criteria. Finally, functionality of LMN's, and perhaps excitability studies in motor nerves, aids understanding of the disease process, allowing measurement of potential treatment effects in clinical trials. Other investigational techniques, such as electrical impedance myography, muscle and nerve ultrasound, and spinal cord imaging methods may prove useful in future. PMID:27117334

  6. Microplastic flow in SIC/AL composites

    SciTech Connect

    Shi, N.; Arsenault, R.J.

    1995-12-31

    Experimentally it has been determined that if a composite containing a reinforcement which has a different (in general lower) thermal coefficient of expansion as compared to the matrix, then upon cooling from the processing or annealing temperature, plastic relaxation of the misfit strain will occur. Also, experimentally it has been shown that as the size of the reinforcement is increased, i.e., from small spheres to large spheres, there is a decrease in the summation of the effective plastic strain in the matrix. In other words there is a decrease in the average dislocation density in the matrix. However, if the shape of the reinforcement is changed from spherical to short fiber to continuous filament, then the dislocation density increases. This experimental data is obtained at a constant volume fraction. A very simple model of plastic relaxation based on prismatic punching of dislocations from the interface can account for the decrease in the dislocation density with an increase reinforcement size, and the increase in dislocation density when changing the shape from a sphere to a continuous filament. A FEM analysis of the shape factor is also capable of predicting the correct trend. However, at present the continuum mechanics methods that have been investigated can not predict the size dependence. A simple model to explain the size effect in Al{sub 2}O{sub 3}/NiAl composites based on the deformation characteristics of NiAl will be discussed.

  7. Diet and dietetics in al-Andalus.

    PubMed

    Salas-Salvadó, Jordi; Huetos-Solano, Maria D; García-Lorda, Pilar; Bulló, Mònica

    2006-08-01

    Al-Andalus society (711-1492) based its idea of health on the wisdom of Classical Greece, the Hippocratic-Galenic theories, as well as the Persian and Hindu cultures. The twelfth century in al-Andalus is considered to be the most prolific period for works of a scientific and technical nature. At the time, the main treatises on dietetics were written and this science reached its widest expression with such leading figures as Ibn Wāfīd, Avenzoar, Averroes and Maimonides, whose works revealed the first scientific knowledge on the nutritional processes of the human body. Diet was regarded as being essential for health and the prevention of disease. Dietary guidelines were written for different age groups, different body types and different seasons of the year. The amount of food to be ingested, the number of meals recommended and the order in which the food should be consumed were all issues that were discussed. A variety of foods were thought to have medicinal properties, some of which are known today. The diet in al-Andalus was varied and very probably made a substantial contribution to the origin of the present-day Mediterranean diet, rich in olive oil, wholemeal cereals, fruit and vegetables, fish, lamb, poultry, nuts and spices. We also find that many of the terms in current use in diet and agriculture are a living testimony to the Arabic influence, as are many of the dishes of our varied Mediterranean gastronomy. PMID:16923240

  8. The atomic details of the interfacial interaction between the bottom electrode of Al/AlOx/Al Josephson junctions and HF-treated Si substrates

    NASA Astrophysics Data System (ADS)

    Zeng, L. J.; Krantz, P.; Nik, S.; Delsing, P.; Olsson, E.

    2015-04-01

    The interface between the Al bottom contact layer and Si substrates in Al based Josephson junctions is believed to have a significant effect on the noise observed in Al based superconducting devices. We have studied the atomic structure of it by transmission electron microscopy. An amorphous layer with a thickness of ˜5 nm was found between the bottom Al electrode and HF-treated Si substrate. It results from intermixing between Al, Si, and O. We also studied the chemical bonding states among the different species using energy loss near edge structure. The observations are of importance for the understanding of the origin of decoherence mechanisms in qubits based on these junctions.

  9. Effect of the composition of Al-Li alloys on the quantitative relation between the δ'(Al3Li), S1(Al2MgLi), and T1(Al2CuLi) phases

    NASA Astrophysics Data System (ADS)

    Betsofen, S. Ya.; Antipov, V. V.; Grushin, I. A.; Knyazev, M. I.; Khokhlatova, L. B.; Alekseev, A. A.

    2015-01-01

    Al-Li alloys are considered. A quantitative approach to the determination of the ratio of the fractions of the binary and ternary intermetallic phases in Al-Mg(Cu)-Li alloys is developed on the basis of chemical and phase composition balance equations and the experimentally measured lattice parameter of the α solid solution. The ratio of the fractions of the δ'(Al3Li) and S1(T1) phases in Al-Mg(Cu)-Li alloys is shown to be determined by the ratio of the mole fractions of Li and Mg(Cu). Equations are proposed for calculating the weight fractions of the S1(Al2MgLi), T1(Al2CuLi) and δ'(Al3Li) phases in domestic and foreign Al-Mg-Li alloys 1420, 1424, 5090 and Al-Cu-Li alloys 1440, 1460, 1461, 1441, 1469, 2090, 2095, 8090, and Weldalite 049.

  10. The oxidation of Ni-rich Ni-Al intermetallics

    NASA Technical Reports Server (NTRS)

    Doychak, Joseph; Smialek, James L.; Barrett, Charles A.

    1988-01-01

    The oxidation of Ni-Al intermetallic alloys in the beta-NiAl phase field and in the two phase beta-NiAl/gamma'-Ni3Al phase field has been studied between 1000 and 1400 C. The stoichiometric beta-NiAl alloy doped with Zr was superior to other alloy compositions under cyclic and isothermal oxidation. The isothermal growth rates did not increase monotonically as the alloy Al content was decreased. The characteristically ridged alpha-Al2O3 scale morphology, consisting of cells of thin, textured oxide with thick growth ridges at cell boundaries, forms on oxidized beta-NiAl alloys. The correlation of scale features with isothermal growth rates indicates a predominant grain boundary diffusion growth mechanism. The 1200 C cyclic oxidation resistance decreases near the lower end of the beta-NiAl phase field.

  11. Creep and Toughness of Cryomilled NiAl Containing Cr

    NASA Technical Reports Server (NTRS)

    Whittenberger, J. Daniel; Aikin, Beverly; Salem, Jon

    2000-01-01

    NiAl-AlN + Cr composites were produced by blending cryomilled NiAl powder with approx. 10 vol % Cr flakes. In comparison to the as-consolidated matrices, hot isostatically pressed Cr-modified materials did not demonstrate any significant improvement in toughness. Hot extruded NiAl-AlN+10.5Cr, however, possessed a toughness twice that determine for the base NiAl-AlN alloy. Measurement of the 1200 to 1400 K plastic flow properties revealed that the strength of the composites was completely controlled by the properties of the NiAl-AlN matrices. This behavior could be successfully modeled by the Rule-of-Mixtures, where load is shed from the weak Cr to the strong matrix.

  12. [Bibliometric analysis of Revista Médica del IMSS in the Scopus database for the period between 2005-2013].

    PubMed

    García-Gómez, Francisco; Ramírez-Méndez, Fernando

    2015-01-01

    Objetivo: analizar la visibilidad de la Revista Médica del Instituto Mexicano del Seguro Social (Rev Med Inst Mex Seguro Soc) en la base de datos Scopus y describir los principales indicadores bibliométricos cuantitativos de la producción científica publicados durante el periodo 2005-2013. Métodos: para el análisis se utilizó la base de datos Scopus y se limitó el periodo de búsqueda a los años 2005-2013. La estrategia de búsqueda se ejecutó en los campos específicos de Título de la Publicación (Source Title) con el término Revista Médica del Instituto Mexicano del Seguro Social y sus posibles variantes, asícomo el número ISSN de la revista. Para el análisis de los datos obtenidos se utilizaron las herramientas de Scopus y los programas Excel y Access. Resultados: se encontraron 864 trabajos publicados durante el periodo 2005-2013 que fueron incluidos en Scopus. Se identificaron los autores con mayor producción científica y mayor número de citas acumuladas a sus trabajos, asícomo las principales revistas que citan a la Rev Med Inst Mex Seguro Soc. Se describen las principales áreas temáticas, tipos de documentos y otros indicadores bibliométricos que caracterizan a la publicación. Conclusiones: el uso de Scopus brinda la posibilidad de analizar con una herramienta externa al IMSS la visibilidad de la producción científica publicada en la Revista Médica del IMSS, además de que contribuye a identificar el estado de la ciencia en México y de los países en vías desarrollo.

  13. High-efficiency of AlInGaN/Al(In)GaN-delta AlGaN quantum wells for deep-ultraviolet emission

    NASA Astrophysics Data System (ADS)

    Saidi, Hosni; Ridene, Said

    2016-10-01

    Band structure and optical gain properties of AlInGaN/AlInGaN-delta-AlGaN quantum wells for deep-ultraviolet light emitting and lasers diodes with wavelength λ ∼229 nm and TE-polarized optical gain peak intensity ∼1.7 times larger than the conventional AlInN-delta-GaN was proposed and investigated in this work. The active region is made up of 20 Å staggered Al0.89In0.03Ga0.08N/Al0.8In 0.01Ga0.19N layers with a 3 Å Al0.46Ga0.54N delta layer. The use of the quaternary AlInGaN well layer permits the independent control of the band gap and the lattice parameter, so that the internal electric field induced by polarizations can be reduced and interband transition energy increases. Therefore, we can predict that the optical performance of the AlInGaN-delta-AlGaN is more convenient for an emission in the deep-ultraviolet than that of the conventional AlInN-delta-GaN-based quantum wells.

  14. Alignment of the TiAl/Ti{sub 3}Al lamellar microstructure in TiAl alloys by growth from a seed material

    SciTech Connect

    Johnson, D.R.; Masuda, Y.; Inui, H.; Yamaguchi, M.

    1997-06-01

    By using an appropriately oriented seed from the TiAl-Si system, the TiAl/Ti{sub 3}Al lamellar microstructure was aligned parallel to the growth direction in a number of directionally solidified TiAl-based alloys. The seed composition was kept constant at Ti-43Al-3Si (at.%) and the composition of the master ingots was varied for alloys in the TiAl-Si, TiAl-Nb-Si, and Ti-Al systems. The lamellar microstructure could be aligned for alloys containing up to approximately 47 at.% (Al + Si) in each of these systems. For the composition of seed material, Ti-43Al-3Si, where alpha is the primary solidification phase, the original orientation of the lamellar microstructure was maintained after heating to and cooling from the single-phase alpha region making seeding of the alpha phase possible. When this silicon containing seed was used, the nucleation of the primary beta phase in master alloys of Ti-(47 {minus} x)Al-xSi(x = 0 to 1 at.%) could be suppressed resulting in the nucleation and growth of only the alpha phase with an orientation determined by the seed crystal. After steady state conditions were reached, single PST crystals with an aligned lamellar microstructure could be grown at growth rates as high as 40 mm/h.

  15. Short-period superlattices of AlN/Al{sub 0.08}Ga{sub 0.92}N grown on AlN substrates

    SciTech Connect

    Nikishin, S.A.; Borisov, B.A.; Chandolu, A.; Kuryatkov, V.V.; Temkin, H.; Holtz, M.; Mokhov, E.N.; Makarov, Yu.; Helava, H.

    2004-11-08

    High-quality short-period superlattices of AlN/Al{sub 0.08}Ga{sub 0.92}N have been grown by gas-source molecular-beam epitaxy with ammonia on Al face of AlN (0001) substrates. A significant reduction was achieved in the dislocation density, down to 3x10{sup 8} cm{sup -2}. Complete removal of residual Al{sub 2}O{sub 3} surface oxide is needed in order to obtain low dislocation density in homoepitaxy on AlN. We show that the presence of Al{sub 2}O{sub 3} islands with the surface coverage as low as 0.2% results in increased dislocation density.

  16. Chemical ordering and large tunnel magnetoresistance in Co2FeAl/MgAl2O4/Co2FeAl(001) junctions

    NASA Astrophysics Data System (ADS)

    Scheike, Thomas; Sukegawa, Hiroaki; Inomata, Koichiro; Ohkubo, Tadakatsu; Hono, Kazuhiro; Mitani, Seiji

    2016-05-01

    Epitaxial magnetic tunnel junctions (MTJs) with a Co2FeAl/CoFe (0.5 nm)/MgAl2O4/Co2FeAl(001) structure were fabricated by magnetron sputtering. High-temperature in situ annealing led to a high degree of B2-order in the Co2FeAl layers and cation order of the MgAl2O4 barrier. Large tunnel magnetoresistance (TMR) of up to 342% was obtained at room temperature (616% at 4 K), in contrast to the TMR ratio ( ≲ 160%) suppressed by the band-folding effect in Fe/cation-ordered MgAl2O4/Fe MTJs. The present study reveals that the high degree of B2-order and the resulting high spin polarization in the Co2FeAl electrodes enable us to bypass the band-folding problem in spinel barriers.

  17. A novel TiAl3/Al2O3 composite coating on γ-TiAl alloy and evaluating the oxidation performance

    NASA Astrophysics Data System (ADS)

    Wang, Jiqiang; Kong, Lingyan; Li, Tiefan; Xiong, Tianying

    2016-01-01

    A novel TiAl3/Al2O3 composite coating was prepared on γ-TiAl alloy. The process included two steps: (1) TiAl3/Al2O3 composite powders were prepared by high energy ball milling of pure Al and nano-TiO2 powders, followed by a heat-treatment; (2) the as-prepared composite powders were deposited on γ-TiAl substrate by cold spray. The cyclic oxidation was conducted at 900 °C to test the performance of the composite coating. The results showed that the composite coating had good crack resistance and effectively decreased the oxidation rate of the substrate.

  18. Effect of nitrogen incorporation into Al-based gate insulators in AlON/AlGaN/GaN metal-oxide-semiconductor structures

    NASA Astrophysics Data System (ADS)

    Asahara, Ryohei; Nozaki, Mikito; Yamada, Takahiro; Ito, Joyo; Nakazawa, Satoshi; Ishida, Masahiro; Ueda, Tetsuzo; Yoshigoe, Akitaka; Hosoi, Takuji; Shimura, Takayoshi; Watanabe, Heiji

    2016-10-01

    The superior physical and electrical properties of aluminum oxynitride (AlON) gate dielectrics on AlGaN/GaN substrates in terms of thermal stability, reliability, and interface quality were demonstrated by direct AlON deposition and subsequent annealing. Nitrogen incorporation into alumina was proven to be beneficial both for suppressing intermixing at the insulator/AlGaN interface and reducing the number of electrical defects in Al2O3 films. Consequently, we achieved high-quality AlON/AlGaN/GaN metal-oxide-semiconductor capacitors with improved stability against charge injection and a reduced interface state density as low as 1.2 × 1011 cm-2 eV-1. The impact of nitrogen incorporation into the insulator will be discussed on the basis of experimental findings.

  19. Moléculas orgánicas obtenidas en simulaciones experimentales del medio interestelar.

    NASA Astrophysics Data System (ADS)

    Muñoz-Caro, Guillermo Manuel

    Las nubes moleculares son regiones de formación de estrellas, con temperaturas cinéticas entre 10-50 K y densidades de 103-106 átomos cm-3. Su materia está formada por gas y polvo interestelar. Estas partículas de polvo están cubiertas por una fina capa de hielo, de unos 0.01 μm, que contiene H2O y a menudo CO, CO2, CH3OH y NH3. El hielo es presumiblemente irradiado por fotones ultravioleta y rayos cósmicos en las zonas poco profundas de las nubes moleculares y las regiones circunestelares. En un sistema de vacío, P ˜ 10-7 mbar, simulamos la deposición de hielo a partir de 10 K y la irradiación ultravioleta por medio de una lámpara de descarga de hidrógeno activada con microondas. La evolución del hielo se observa por medio de un espectrómetro infrarrojo. De este modo es posible determinar la composición del hielo observado en el medio interestelar y predecir la presencia de moléculas aún no detectadas en el espacio, que han sido producto del procesamiento del hielo en nuestros experimentos. También es posible calentar el sistema hasta temperatura ambiente para sublimar el hielo depositado. Cuando el hielo ha sido previamente irradiado, se observa un residuo compuesto por moléculas orgánicas complejas, algunas prebióticas, como varios ácidos carboxílicos, aminas, amidas, ésteres y en menor proporción moléculas heterocíclicas y aminoácidos. Algunas de estas moléculas podrían detectarse en estado gaseoso por medio de observaciones milimétricas y de radio. También podrían estar presentes en el polvo cometario, cuyo análisis químico está planeado por las misiones Stardust y Rosetta. Mientras tanto, nuestro grupo está llevando a cabo el análisis de partículas de polvo interplanetario (IDPs), algunas de las cuales pueden ser de origen cometario. Al igual que ocurre con los productos obtenidos por irradiación del hielo en nuestros experimentos, algunas IDPs son ricas en material orgánico que contiene oxígeno.

  20. Kurt Gödels Brünner Verwandte

    NASA Astrophysics Data System (ADS)

    Müller, Dora

    2007-11-01

    The author of this memoir Dora Müller (born 1920) belongs - as well as Kurt Gödel-to the German minority playing an important role in the past life of Brno. The marriage of his son included her among the Gödels collaterals. She was chemist, but also pianist, historician, participant of antinacist movement and iniciator of Czech-German understanding after war. Following her personal experiences, remembrances of Gödels relatives and documental materials, she evokes the atmosphere of broader family milieu of Kurt Gödel.

  1. Al-Ca and Al-Fe metal-metal composite strength, conductivity, and microstructure relationships

    SciTech Connect

    Kim, Hyong June

    2011-01-01

    Deformation processed metal-metal composites (DMMC’s) are composites formed by mechanical working (i.e., rolling, swaging, or wire drawing) of two-phase, ductile metal mixtures. Since both the matrix and reinforcing phase are ductile metals, the composites can be heavily deformed to reduce the thickness and spacing of the two phases. Recent studies have shown that heavily drawn DMMCs can achieve anomalously high strength and outstanding combinations of strength and conductivity. In this study, Al-Fe wire composite with 0.07, 0.1, and 0.2 volume fractions of Fe filaments and Al-Ca wire composite with 0.03, 0.06, and 0.09 volume fractions of Ca filaments were produced in situ, and their mechanical properties were measured as a function of deformation true strain. The Al-Fe composites displayed limited deformation of the Fe phase even at high true strains, resulting in little strengthening effect in those composites. Al-9vol%Ca wire was deformed to a deformation true strain of 13.76. The resulting Ca second-phase filaments were deformed to thicknesses on the order of one micrometer. The ultimate tensile strength increased exponentially with increasing deformation true strain, reaching a value of 197 MPa at a true strain of 13.76. This value is 2.5 times higher than the value predicted by the rule of mixtures. A quantitative relationship between UTS and deformation true strain was determined. X-ray diffraction data on transformation of Al + Ca microstructures to Al + various Al-Ca intermetallic compounds were obtained at the Advanced Photon Source at Argonne National Laboratory. Electrical conductivity was measured over a range of true strains and post-deformation heat treatment schedules.

  2. Influence of Reaction with XeF2 on Surface Adhesion of Al and Al2O3 Surfaces

    SciTech Connect

    Zhang, Tianfu; Park, Jeong Y.; Huang, Wenyu; Somorjai, Gabor A.

    2008-07-28

    The change of surface adhesion after fluorination of Al and Al{sub 2}O{sub 3} surfaces using XeF{sub 2} was investigated with atomic force microscopy. The chemical interaction between XeF{sub 2} and Al and Al{sub 2}O{sub 3} surfaces was studied by in situ x-ray photoelectron spectroscopy. Fresh Al and Al{sub 2}O{sub 3} surfaces were obtained by etching top silicon layers of Si/Al and Si/Al{sub 2}O{sub 3} with XeF{sub 2}. The surface adhesion and chemical composition were measured as a function of time after the exposure to air or annealing (at 200 C under vauum). The correlation between the adhesion force increase and presence of AlF{sub 3} on the surface was revealed.

  3. Influence of reaction with XeF2 on surface adhesion of Al and Al2O3 surfaces

    NASA Astrophysics Data System (ADS)

    Zhang, Tianfu; Park, Jeong Y.; Huang, Wenyu; Somorjai, Gabor A.

    2008-10-01

    The change in surface adhesion after fluorination of Al and Al2O3 surfaces using XeF2 was investigated with atomic force microscopy. The chemical interaction between XeF2 and Al and Al2O3 surfaces was studied by in situ x-ray photoelectron spectroscopy. Fresh Al and Al2O3 surfaces were obtained by etching top silicon layers of Si /Al and Si /Al2O3 with XeF2. The surface adhesion and chemical composition were measured after the exposure to air or annealing (at 200°C under vacuum). The correlation between the adhesion force increase and presence of AlF3 on the surface was revealed.

  4. An evening at "La Clinica del Pueblo".

    PubMed

    Shefsky, M L

    1986-01-01

    This article describes a typical evening at the Clinica del Pueblo in the Hispanic neighborhood of Adams-Morgan in Washington, D.c. The Clinical del Pueblo began operating in 1983 in response to the urgen medical needs of Central American refugees arriving in the Washington D.c. area. The refugees bring with them severe trauma, fear, and health problems caused by the civil was and exacerbated by inadequate or non-existant health services. Approximately 80,000 Salvadoran refugees live in the area. They do not receive adequate health care for 3 reasons. 1) Because the US goverment is unwilling to recognize them as true refugees, they live with the constant threat of deportatin back to the violence from which they have fled. 2) Refugees lack the ability to pay for private care. 3) Langauage and culture create frightening barriers to health care for the refugees. For those who do seek care, these barriers can lead to the inadequate or incomplete diagnoses and poor compliance and follow-up. Plenty International and the Central American Refugee Center responded to these problems by organizing a free clinic to provide not only medical care but also a training course for volunteers. The director of the clinic organizes the course, the classes are taught by a variety of people including the clinic's volunteer physicians, nurses, and public health educators as well as graduates of previus training courses and people from the wider community. The services of the clinic reach only a small portion of the population in need. However, the fact that free medical services are now available to some Central American refugees make the Clinica del Pueblo an important program.

  5. Huave de San Mateo del Mar, Oaxaca (Huave of San Mateo del Mar, Oaxaca).

    ERIC Educational Resources Information Center

    Mexico Coll. (Mexico City)

    This document is one of 17 volumes on indigenous Mexican languages and is the result of a project undertaken by the Archivo de Lenguas Indigenas de Mexico. This volume contains information on Huave, an indigenous language of Mexico spoken in San Mateo del Mar, in the state of Oaxaca. The objective of collecting such a representative sampling of…

  6. Hot Corrosion Performance of AlO-CrO/NiCoCrAlYTa and AlO/NiCoCrAlYTa Coatings Deposited by Atmospheric Plasma Spraying

    NASA Astrophysics Data System (ADS)

    Tao, Chong; Wang, Lei; Cheng, Nailiang; Hu, Hengfa; Liu, Yang; Song, Xiu

    2016-04-01

    AlO-CrO/NiCoCrAlYTa and AlO/NiCoCrAlYTa coatings were deposited on 316L stainless steel substrate using atmospheric plasma spraying, respectively, in order to improve the oxidation and corrosion resistance. The hot corrosion performance of the coatings at 700 and 900 °C were studied, and the detailed microstructures and phase composition of the coatings were analyzed using x-ray diffraction, scanning electron microscope with energy dispersive spectrometer, and transmission electron microscope. The results show that both coatings are structurally featured by slatted layers, consisting of amorphous phase, Cr2O3, Ni3Al, and Al2O3. The hot corrosion resistance of AlO-CrO/NiCoCrAlYTa coating is better than that of AlO/NiCoCrAlYTa coating. This improvement is attributed to lower porosity and more compact Cr2O3 in AlO-CrO/NiCoCrAlYTa coating which performs better than Al2O3 in blocking further inward progress of corrosion and oxidization.

  7. Deep SiO2 etching with Al and AlN masks for MEMS devices

    NASA Astrophysics Data System (ADS)

    Bliznetsov, Vladimir; Mao Lin, Hua; Zhang, Yue Jia; Johnson, David

    2015-08-01

    Silicon oxide-based materials such as quartz and silica are widely used in microelectromechanical systems (MEMS). One way to enhance the capability of their deep plasma etching is to increase selectivity by the use of hard masks. Although this approach was studied previously, information on the use of hard masks for the etching of silicon-oxide based materials on 200 mm substrates is scarce. We present the results of etching process development for amorphous silicon oxide using Al and AlN masks with a view of the application of the results for the etching of silica and quartz. Three gas chemistries (C4F8/O2, CF4 and SF6) and their mixtures were compared in an industrial reactive ion etch (RIE) chamber with two plasma sources. It was established that pure SF6 is the best etchant and AlN is a better mask than Al for providing higher selectivity and a sidewall angle close to vertical. A range of etching parameters for micromasking-free etching was established and etched structures of up to a 4 : 1 aspect ratio were created in 21 μm-thick oxide using the process with an etch rate of 0.32-0.36 μm min-1 and a selectivity to AlN mask of (38-49) : 1.

  8. Microstructure evolution and properties of Al/Al-Mg-Si alloy clad wire during heat treatment

    NASA Astrophysics Data System (ADS)

    Wang, Xiang; Guan, Ren-guo; Zhang, Yang; Su, Ning; Ji, Lian-ze; Li, Yuan-dong; Chen, Ti-jun

    2016-06-01

    In this paper, heat treatment was carried out on Al/Al-Mg-Si alloy clad wire, and microstructure evolution and properties of Al/Al-Mg-Si alloy clad wire during heat treatment were investigated. During solution, contents of Mg and Si in inner matrix increased due to dissolution of primary Mg2Si, and they also increased in outer matrix because Mg and Si diffused across the interface. Tensile strength of the clad wire increased firstly and then decreased, and elongation continuously increased, while conductivity continuously decreased with the increase in solution time. In aging process, Mg2Si precipitated in both inner core and outer layer, and the content and average diameter of the precipitate increased with the increase in aging time. The content of precipitate was higher, and the average diameter was bigger in inner core. Tensile strength of the clad wire increased firstly and then decreased with the increase in aging time, and the elongation continuously decreased, while the conductivity continuously increased. The peak tensile strength of 202 MPa occurred at 8 h, when the corresponding elongation was 20 % and the conductivity reached 56.07 %IACS. Even tensile strength of the prepared clad wire approximately equaled to that of Al-0.5Mg-0.35Si alloy 203 MPa, the conductivity was obviously improved from 54.2 to 56.07 %IACS.

  9. Revisiting the Al/Al2O3 Interface: Coherent Interfaces and Misfit Accommodation

    PubMed Central

    Pilania, Ghanshyam; Thijsse, Barend J.; Hoagland, Richard G.; Lazić, Ivan; Valone, Steven M.; Liu, Xiang-Yang

    2014-01-01

    We study the coherent and semi-coherent Al/α-Al2O3 interfaces using molecular dynamics simulations with a mixed, metallic-ionic atomistic model. For the coherent interfaces, both Al-terminated and O-terminated nonstoichiometric interfaces have been studied and their relative stability has been established. To understand the misfit accommodation at the semi-coherent interface, a 1-dimensional (1D) misfit dislocation model and a 2-dimensional (2D) dislocation network model have been studied. For the latter case, our analysis reveals an interface dislocation structure with a network of three sets of parallel dislocations, each with pure-edge character, giving rise to a pattern of coherent and stacking-fault-like regions at the interface. Structural relaxation at elevated temperatures leads to a further change of the dislocation pattern, which can be understood in terms of a competition between the stacking fault energy and the dislocation interaction energy at the interface. Our results are expected to serve as an input for the subsequent dislocation dynamics models to understand and predict the macroscopic mechanical behavior of Al/α-Al2O3 composite heterostructures. PMID:24670940

  10. Tribological Properties of Ti(Al,O)/Al2O3 Composite Coating by Thermal Spraying

    NASA Astrophysics Data System (ADS)

    Salman, Asma; Gabbitas, Brian; Cao, Peng; Zhang, Deliang

    The use of thermal spray coatings provides protection to the surfaces operating in severe environments. The main goal of the current work is to investigate the possibility of using a high velocity air fuel (HVAF) thermally sprayed wear resistant Ti(Al,O)/Al2O3 coating on tool steel (H13) which is used for making dies for aluminium high pressure die casting and dummy blocks aluminium extrusion. A feedstock of Ti(Al,O)/Al2O3 composite powder was produced from a mixture of Al and TiO2 powders by high energy mechanical milling, followed by a thermal reaction process. The feedstock was then thermally sprayed using a high velocity air-fuel (HVAF) technique onto H13 steel substrates to produce a composite coating. The present study describes and compares the tribological properties such as friction and sliding wear rate of the coating both at room and high temperature (700°C). The wear resistance of the coating was investigated by a tribometer using a spherical ended alumina pin as a counter body under dry and lubricating conditions. The results showed that composite coating has lower wear rate at high temperature than at room temperature without using lubricant. The composite coating was characterized using scanning electron microscopy (SEM), optical microscopy and X-ray diffractometry (XRD). This paper reports the experimental observations and discusses the wear resistance performance of the coatings at room and high temperatures.

  11. Revisiting the Al/Al2O3 Interface: Coherent Interfaces and Misfit Accommodation

    DOE PAGESBeta

    Pilania, Ghanshyam; Thijsse, Barend J.; Hoagland, Richard G.; Lazić, Ivan; Valone, Steven M.; Liu, Xiang-Yang

    2014-03-27

    We report the coherent and semi-coherent Al/α-Al2O3 interfaces using molecular dynamics simulations with a mixed, metallic-ionic atomistic model. For the coherent interfaces, both Al-terminated and O-terminated nonstoichiometric interfaces have been studied and their relative stability has been established. To understand the misfit accommodation at the semi-coherent interface, a 1-dimensional (1D) misfit dislocation model and a 2-dimensional (2D) dislocation network model have been studied. For the latter case, our analysis reveals an interface dislocation structure with a network of three sets of parallel dislocations, each with pure-edge character, giving rise to a pattern of coherent and stacking-fault-like regions at the interface.more » Structural relaxation at elevated temperatures leads to a further change of the dislocation pattern, which can be understood in terms of a competition between the stacking fault energy and the dislocation interaction energy at the interface. In conclusion, our results are expected to serve as an input for the subsequent dislocation dynamics models to understand and predict the macroscopic mechanical behavior of Al/α-Al2O3 composite heterostructures.« less

  12. Near Infrared Photometry of Nova Del 2013

    NASA Astrophysics Data System (ADS)

    Cass, C. A.; Carlon, L. R.; Corgan, T. D.; Dykhoff, A. D.; Gehrz, D. R.; Shenoy, P. D.

    2013-08-01

    Subjects: Infra-Red, Nova We report RIJHKLM photometry of Nova Del 2013 taken on August 28.13 UT using an As:Si bolometer mounted on the 0.76-m infrared telescope of the University of Minnesota's O'Brien Observatory (Marine on St. Croix, Minnesota, USA). Vega (alpha Lyrae) was used as the standard star. On this date we find: R = 5.6 +/- 0.1, I = 5.2 +/- 0.1, J = 4.5 +/- 0.1, H = 4.7 +/- 0.1, K = 4.7 +/- 0.1, L = 3.3 +/- 0.2, M = +1.8 +/- 0.3.

  13. ALS 2883: Analysis of spectroscopic features

    NASA Astrophysics Data System (ADS)

    Silva, A. R.; Levenhagen, R. S.; Künzel, R.; Leister, N. V.

    2014-10-01

    ALS 2883 (RA 13^{h} 02^{m} 47^{s}, DEC -63^{o} 50' 08'', M_{v} 10.1) is the first known radio pulsar with an emission B-type companion system, discovered in 1992. The Be companion of ALS 2883 has all line profiles in the visible range in emission. This emission is a common hallmark among many Be stars, and this effect is thought to be due to the presence of a circumstellar environment. Also, the star is orbiting a X-ray source as has been detected by the XMM-Newton Science Operation Center. In this study, we present the observations of ALS 2883 made at the OPD/LNA 1.60 m telescope with the Coudé spectrograph in the range 4000 to 5000 Å and S/N simeq 200, performed in April 2011. First-order estimations of T_{eff} and log g parameters have been performed through Johnson's UBV and JHK photometric calibrations. Projected rotation velocity V sin i has been estimated through the mean of the first zeroes of the Fourier transforms of neutral helium rotation profiles adopting linear, quadratic and square-root limb-darkening laws. The physical conditions of the circumstellar envelope were estimated through the solution of the radiative transport equation assuming local thermodynamic equilibrium within a disk-shaped circumstellar environment with a Keplerian velocity field. The radiative transport equation is solved assuming the Roche model as a boundary condition in the circumstellar environment. Iterating the computations with a downhill-simplex algorithm, this analysis leads to a best solution for an envelope with T simeq 9500 K, gas density ρ simeq 2 × 10^{-15} g.cm^{-3}, internal radius r_{i} simeq 8 R_{odot} and external radius r_e simeq 30 R_{odot}, rotating with V_{rot} simeq 140 km.s^{-1} and expanding with V_{exp} simeq 90 km.s^{-1}.

  14. Orbit stability of the ALS storage ring

    SciTech Connect

    Keller, R.; Nishimura, H.; Biocca, A.

    1997-05-01

    The Advanced Light Source (ALS) storage ring, a synchrotron light source of the third generation, is specified to maintain its electron orbit stable within one tenth of the rms beam size. In the absence of a dedicated orbit feed-back system, several orbit-distorting effects were investigated, aided by a new interactive simulation tool, the code TRACY V. The effort has led to a better understanding of the behavior of a variety of accelerator subsystems and in consequence produced a substantial improvement in day-to-day orbit stability.

  15. Development of SiAlON materials

    NASA Technical Reports Server (NTRS)

    Layden, G. K.

    1977-01-01

    Cold pressing and sintering techniques were used to produce ceramic bodies in which the major phase was beta prime Si3-Al-O-N4 solid solution. A variety of foreign oxides were used to promote liquid phase sintering, and this resulted in the incorporation of additional solid phases in the ceramic bodies which controlled elevated temperature properties. None of the bodies studied to date exhibited both adequate high temperature mechanical properties and oxidation resistance. Criteria are suggested to guide the formulation of bodies with improved high temperature properties.

  16. Transformation to Ni5Al3 in a 63.0 at. pct Ni-Al alloy

    NASA Technical Reports Server (NTRS)

    Khadkikar, P. S.; Locci, I. E.; Vedula, K.; Michal, G. M.

    1993-01-01

    Microstructures of 63 at. pct P/M Ni-Al alloys with a composition close to the stoichiometry of the Ni5Al3 phase were investigated using homogenized and quenched specimens aged at low temperatures for various times. Results of analyses of XRD data and electron microscopy observations were used for quantitative phase analysis, performed to calculate the (NiAl + Ni5Al3)/Ni5Al3 phase boundary locations. The measured lattice parameters of Ni5Al3 phase formed at 823, 873, and 923 K indicated an increase in tetragonality of the phase with increasing nickel content.

  17. Acoustic resonator with Al electrodes on an AlN layer and using a GaAs substrate

    DOEpatents

    Kline, Gerald R.; Lakin, Kenneth M.

    1985-12-03

    A method of fabricating an acoustic wave resonator wherein all processing steps are accomplished from a single side of said substrate. The method involves deposition of a multi-layered Al/AlN structure on a GaAs substrate followed by a series of fabrication steps to define a resonator from said composite. The resulting resonator comprises an AlN layer between two Al layers and another layer of AlN on an exterior of one of said Al layers.

  18. High pressure sintering behavior and mechanical properties of cBN-Ti3Al and cBN-Ti3Al-Al composite materials

    NASA Astrophysics Data System (ADS)

    Li, Yu; Kou, Zili; Wang, Haikuo; Wang, Kaixue; Tang, Hongchang; Wang, Yanfei; Liu, Shenzhuo; Ren, Xiangting; Meng, Chuanming; Wang, Zhigang

    2012-12-01

    The sintering behavior and mechanical properties of cubic boron nitride (cBN) composites, using the mixture of cBN-Ti3Al and cBN-Ti3Al-Al as the starting material respectively, were investigated under high pressure and high temperature (HPHT) conditions. The results show that the samples of cBN-Ti3Al-Al sintering system have more homogeneous microstructures. Young's modulus, shear modulus, and bulk modulus of samples measured by ultrasonic measurements can reach to 782±3 GPa, 344±1 GPa, and 348±2 GPa, respectively. The hardness increases remarkably with the sintering temperature rising, and reaches to the highest value of 35.04±0.51 GPa. For the cBN-Ti3Al sintering system, the X-ray diffraction patterns of composites reveal that the chemical reactions between cBN and Ti3Al occurred at 5.0 GPa and 1300°C. The reaction mechanisms of both cBN-Ti3Al and cBN-Ti3Al-Al sintering systems are discussed in this paper.

  19. 'Ice Bucket Challenge' Funds a Boon to ALS Research

    MedlinePlus

    ... big data' in ALS research," Lucie Bruijn, ALS Association chief scientist, said in the news release. "The sophisticated gene analysis that led to this finding was only possible because of the large number ...

  20. Epitaxial Zintl aluminide SrAl4 grown on a LaAlO3 substrate

    NASA Astrophysics Data System (ADS)

    Schlipf, Lukas; Slepko, Alexander; Posadas, Agham B.; Seinige, Heidi; Dhamdhere, Ajit; Tsoi, Maxim; Smith, David J.; Demkov, Alexander A.

    2013-07-01

    Zintl phases are a class of intermetallic materials that have simultaneously ionic and covalent bonding resulting from charge transfer between two different atomic species. We present a combined first principles and experimental study of Zintl-phase SrAl4, which is grown in thin film form on the perovskite oxide LaAlO3 using molecular beam epitaxy. The structural properties are investigated using reflection-high-energy electron diffraction, x-ray diffraction, and cross-section transmission electron microscopy, which reveal relaxed epitaxial island growth. Photoelectron spectroscopy measurements verify the Zintl-Klemm nature of the bonding in the material and are utilized to determine the band offset and the work function of SrAl4, while transport measurements confirm its metallic behavior. The experimentally observed properties are confirmed using density functional calculations.

  1. LPE growth of AlN from Cu-Al-Ti solution under nitrogen atmosphere

    NASA Astrophysics Data System (ADS)

    Kamei, K.; Inoue, S.; Shirai, Y.; Tanaka, T.; Okada, N.; Yauchi, A.

    2006-05-01

    Synthesis of single crystalline AlN has long been the subjects of intensive studies since it has exceptional properties suitable for the substrate materials for optoelectronic and electronic devices. The solution growth technique has some advantages over the sublimation growth technique. Its growth temperature is generally much lower than that of the sublimation growth. The obtained crystal is believed to show superior crystallinity since it is grown under nearly equilibrium condition. In the present study we have developed a new solution growth technique using Cu and Ti as solvents under atmospheric pressure of nitrogen. By using this solution, we have grown AlN single crystalline layer on 6H-SiC substrate at relatively low growth temperatures such as 1600-1800 °C. The thickness of the grown layer was larger than 30 μm. TEM observation revealed the fairly low dislocation density such as 105/cm2 in the obtained AlN layers.

  2. Highly strained AlAs-type interfaces in InAs/AlSb heterostructures

    NASA Astrophysics Data System (ADS)

    Vallet, M.; Claveau, Y.; Warot-Fonrose, B.; Gatel, C.; Nicolai, J.; Combe, N.; Magen, C.; Teissier, R.; Baranov, A. N.; Ponchet, A.

    2016-05-01

    Spontaneously formed Al-As type interfaces of the InAs/AlSb system grown by molecular beam epitaxy for quantum cascade lasers were investigated by atomic resolution scanning transmission electron microscopy. Experimental strain profiles were compared to those coming from a model structure. High negative out-of-plane strains with the same order of magnitude as perfect Al-As interfaces were observed. The effects of the geometrical phase analysis used for strain determination were evidenced and discussed in the case of abrupt and huge variations of both atomic composition and bond length as observed in these interfaces. Intensity profiles performed on the same images confirmed that changes of chemical composition are the source of high strain fields at interfaces. The results show that spontaneously assembled interfaces are not perfect but extend over 2 or 3 monolayers.

  3. Reaction diffusion in the NiCrAl and CoCrAl systems

    NASA Technical Reports Server (NTRS)

    Levine, S. R.

    1978-01-01

    The paper assesses the effect of overlay coating and substrate composition on the kinetics of coating depletion by interdiffusion. This is accomplished by examining the constitution, kinetics and activation energies for a series of diffusion couples primarily of the NiCrAl/Ni-10Cr or CoCrAl/Ni-10Cr type annealed at temperatures in the range 1000-1205 C for times up to 500 hr. A general procedure is developed for analyzing diffusion in multicomponent multiphase systems. It is shown that by introducing the concept of beta-source strength, which can be determined from appropriate phase diagrams, the Wagner solution for consumption of a second phase in a semiinfinite couple is successfully applied to the analysis of MCrAl couples. Thus, correlation of beta-recession rate constants with couple composition, total and diffusional activation energies, and interdiffusion coefficients are determined.

  4. Precipitant diffusion and surface segregation in Al Alloys near melting point: Al 2024

    NASA Astrophysics Data System (ADS)

    Mohney, Austin; Senevirathne, Indrajith

    2012-02-01

    Industrial Al alloys are precipitant hardened with an impurity phase. Micro precipitants introduce various novel physical properties to the systems system. The diffusion of these constituents under thermal gradient was studied by sequentially increasing temperatures near melting point as it was observed to better facilitate the migration of precipitants. Study is based on Al 2024, age hardened, high strength AL alloy, annealed at incremental temperatures near melting point of 500 C and was observed in Scanning Electron Microscopy (SEM) and Energy Dispersive X ray Spectroscopy (EDX). Solvent cleaned near surface region of the alloy was investigated with observation of differential migration of constituent Cu, Fe Mg and Zn precipitants. The migrations were modeled in terms of diffusion coefficients and established literature of the participating species. Study will attempt to correlate the elemental concentration variation with applied elevated heat stress in industrial settings.

  5. Distribución del continuo ultravioleta e infrarrojo en estrellas Be

    NASA Astrophysics Data System (ADS)

    Cruzado, A.; Ringuelet, A.; di Rocco, H.

    Estamos interesados en interpretar los excesos de flujo infrarrojo y/o ultravioleta observados en estrellas Be con respecto al de estrellas B normales, así como su posible correlación. Una envoltura rodeando la estrella distingue una estrella Be de una B normal; para explicar las observaciones es necesario entonces tener en cuenta todos los posibles procesos físicos que en ella tienen lugar. Adoptando un modelo atmosférico específico, hemos estudiado el proceso de recombinación dielectrónica de metales como MgII y FeII, teniendo en cuenta la posible influencia de la opacidad del medio en el flujo emitido.

  6. Ni-Al2O3 and Ni-Al composite high-aspect-ratio microstructures

    NASA Astrophysics Data System (ADS)

    Wang, Tao; Sorrell, Melford; Kelly, Kevin W.; Ma, Evan

    1998-09-01

    High-aspect-ratio microstructures (HARMs) have a variety of potential applications in heat transfer, fluid mechanics, catalysts and other microelectromechanical systems (MEMS). The aim of this work is to demonstrate the feasibility to fabricate high performance particulate metal-matrix composite and intermetallic micromechanical structures using the LIGA process. Well-defined functionally graded Ni-Al2O3 and Ni-Al high-aspect-ratio microposts were electroformed into lithographically patterned PMMA holes from a nickel sulfamate bath containing submicron alumina and a diluted Watts bath containing microsized aluminum particles, respectively. SEM image analysis showed that the volume fraction of the alumina reached up to around 30% in the Ni-Al2O3 deposit. The Vickers microhardness of these composites is in the range of 418 through 545, which is higher than those of nickel microstructures from a similar particle-free bath and other Ni-based electrodeposits. In the work on Ni-Al electroplating, a newly developed diluted Watts bath was used to codeposit micron-sized aluminum particles. The intermetallic compound Ni3Al was formed by the reaction of nickel matrices and aluminum particles through subsequent annealing at 630 degrees Celsius. WDS and XRD analyses confirmed that the annealed coating is a two-phase (Ni-Ni3Al) composite. The maximum aluminum volume fraction reached 19% at a cathode current density of 12 mA cm-2, and the Vickers microhardness of the as-deposited coatings is in the range 392 - 515 depending on the amount of aluminum incorporated.

  7. Characterization of human sporadic ALS biomarkers in the familial ALS transgenic mSOD1(G93A) mouse model.

    PubMed

    Lilo, Eitan; Wald-Altman, Shane; Solmesky, Leonardo J; Ben Yaakov, Keren; Gershoni-Emek, Noga; Bulvik, Shlomo; Kassis, Ibrahim; Karussis, Dimitrios; Perlson, Eran; Weil, Miguel

    2013-12-01

    Amyotrophic lateral sclerosis (ALS) is a fatal neurodegenerative disorder of motor neurons. Although most cases of ALS are sporadic (sALS) and of unknown etiology, there are also inherited familial ALS (fALS) cases that share a phenotype similar to sALS pathological and clinical phenotype. In this study, we have identified two new potential genetic ALS biomarkers in human bone marrow mesenchymal stem cells (hMSC) obtained from sALS patients, namely the TDP-43 (TAR DNA-binding protein 43) and SLPI (secretory leukocyte protease inhibitor). Together with the previously discovered ones-CyFIP2 and RbBP9, we investigated whether these four potential ALS biomarkers may be differentially expressed in tissues obtained from mutant SOD1(G93A) transgenic mice, a model that is relevant for at least 20% of the fALS cases. Quantitative real-time PCR analysis of brain, spinal cord and muscle tissues of the mSOD1(G93A) and controls at various time points during the progression of the neurological disease showed differential expression of the four identified biomarkers in correlation with (i) the tissue type, (ii) the stage of the disease and (iii) the gender of the animals, creating thus a novel spatiotemporal molecular signature of ALS. The biomarkers detected in the fALS animal model were homologous to those that were identified in hMSC of our sALS cases. These results support the possibility of a molecular link between sALS and fALS and may indicate common pathogenetic mechanisms involved in both types of ALS. Moreover, these results may pave the path for using the mSOD1(G93A) mouse model and these biomarkers as molecular beacons to evaluate the effects of novel drugs/treatments in ALS.

  8. Simulation Study of Al-1Mn/Al-10Si Circular Clad Ingots Prepared by Direct Chill Casting

    NASA Astrophysics Data System (ADS)

    Wu, Li; Kang, Huijun; Chen, Zongning; Fu, Ying; Wang, Tongmin

    2016-02-01

    A modified direct chill casting process based on Novelis FusionTM Technology co-casting process was used recently to prepare Al-1Mn/Al-10Si circular clad ingots. In the current study, a comprehensive simulation model was developed to investigate the direct chill casting process for preparing the Al-1Mn/Al-10Si circular clad ingots, and a parametric study and experimental research of the direct chill casting process was conducted to explore potential success and failure casting conditions. The simulation results revealed the bonding mechanism of the Al-1Mn/Al-10Si interface in the direct chill casting process and identified the effect of certain parameters on casting performance. The results indicated that the effect of casting speed and Al-1Mn casting temperature on the variations of the minimum solid fraction of Al-1Mn at the interface is stronger than that of cooling water flow rate in inner mold, while Al-10Si casting temperature is the weakest of the four casting parameters. The corresponding experimental results verified that Al-1Mn/Al-10Si circular clad ingot with acceptable metallurgical bonding can be successfully prepared by direct chill casting process under the proper casting parameters. The thickness of diffusion zone is about 40 μm, and the fractured position in tensile test was located in the Al-1Mn alloy side which indicated the strength of the interfacial region is higher than that of Al-1Mn alloy.

  9. Comparison on the interaction of Al3+/nano-Al13 with calf thymus DNA /salmon sperm DNA

    NASA Astrophysics Data System (ADS)

    Ma, Fei; Ma, Yue; Du, Changwen; Yang, Xiaodi; Shen, Renfang

    2015-11-01

    The conformation change, binding mode and binding site between Al3+/nano-Al13 and calf thymus DNA/salmon sperm DNA were investigated by UV-vis absorption, FTIR spectra, Raman spectroscopy and CD spectra, as well as melting curves measurement. The UV-vis spectra and circular dichroism spectra results suggested that the phosphate group structure was changed when Al3+ interacted with DNA, while the double-helix was distorted when nano-Al13 interacted with DNA. The FTIR and Raman spectroscopy revealed that the binding sites were Al3+ … PO2, Al3+ … N7/guanine PO2 … Al13 … N7-C8/guanine with calf thymus DNA, and Al3+ … N3-O2/cytosine, Al3+ … N7-C8/guanine, PO2 … Al13 … N7-C8/guanine, PO2 … Al13 … N1/adenine with salmon sperm DNA, respectively. The electrostatic binding was existed between Al3+ and DNA, and the electrostatic binding and complexing were found between nano-Al13 and DNA.

  10. Mechanisms of elevated-temperature deformation in the B2 aluminides NiAl and CoAl

    NASA Technical Reports Server (NTRS)

    Yaney, D. L.; Nix, W. D.

    1988-01-01

    A strain rate change technique, developed previously for distinguishing between pure-metal and alloy-type creep behavior, was used to study the elevated-temperature deformation behavior of the intermetallic compounds NiAl and CoAl. Tests on NiAl were conducted at temperatures between 1100 and 1300 K while tests on CoAl were performed at temperatures ranging from 1200 to 1400 K. NiAl exhibits pure-metal type behavior over the entire temperature range studied. CoAl, however, undergoes a transition from pure-metal to alloy-type deformation behavior as the temperature is decreased from 1400 to 1200 K. Slip appears to be inherently more difficult in CoAl than in NiAl, with lattice friction effects limiting the mobility of dislocations at a much higher tmeperature in CoAl than in NiAl. The superior strength of CoAl at elevated temperatures may, therefore, be related to a greater lattice friction strengthening effect in CoAl than in NiAl.

  11. Precipitation of Kr after implantation into Al

    SciTech Connect

    Birtcher, R.C.; Jaeger, W.

    1985-09-01

    Transmission electron microscopy (TEM) was used to perform a systematic study of the microstructural evolution in Al as a function of the fluence received during 65 keV Kr/sup +/ ion implantation at room temperature. At the lower fluences (2 x 10/sup 16/ to 2 x 10/sup 19/ Kr/sup +/m/sup -2/), isolated dislocation loops and the evolution of a dislocation network was observed by TEM. Above fluences of 10/sup 19/ Kr/sup +/m/sup -2/, the microstructure is dominated by a high density of Kr bubbles whose average size increases with dose. The appearance of additional electron diffraction reflections indicates that the majority of the bubbles contain solid fcc Kr that is epitaxially aligned with the fcc Al matrix. Above fluences of 2 x 10/sup 20/ Kr/sup +/m/sup -2/ an increasing fraction of the Kr is in a liquid or gas-like phase. The thermal stability of the microstructure, characteristic of the different fluence regimes, was investigated up to 640/sup 0/C by in situ TEM annealing experiments.

  12. CarbAl Heat Transfer Material

    NASA Technical Reports Server (NTRS)

    Fink, Richard

    2015-01-01

    The increasing use of power electronics, such as high-current semiconductor devices and modules, within space vehicles is driving the need to develop specialty thermal management materials in both the packaging of these discrete devices and the packaging of modules consisting of these device arrays. Developed by Applied Nanotech, Inc. (ANI), CarbAl heat transfer material is uniquely characterized by its low density, high thermal diffusivity, and high thermal conductivity. Its coefficient of thermal expansion (CTE) is similar to most power electronic materials, making it an effective base plate substrate for state-of-the-art silicon carbide (SiC) super junction transistors. The material currently is being used to optimize hybrid vehicle inverter packaging. Adapting CarbAl-based substrates to space applications was a major focus of the SBIR project work. In Phase I, ANI completed modeling and experimentation to validate its deployment in a space environment. Key parameters related to cryogenic temperature scaling of CTE, thermal conductivity, and mechanical strength. In Phase II, the company concentrated on improving heat sinks and thermally conductive circuit boards for power electronic applications.

  13. Pit initiation in AlO{sub x}/Al thin films

    SciTech Connect

    Son, K.A.; Barbour, J.C.; Missert, N.; Wall, F.D.; Copeland, R.G.; Martinez, M.A.; Minor, K.G.; Buchheit, R.G.; Isaacs, H.S.

    1998-12-31

    The electrochemical responses of AlO{sub x}/Al thin films have been investigated as a function of film growth conditions which produce films with different grain orientation, size and morphology. Films with smooth, 150 nm diameter, randomly oriented grains show a higher pitting potential and lower passive current than those films with large grain-boundary grooving from a mixture of smooth micron-sized, (200)-oriented grains and 300--500 nm diameter, (220)-oriented grains. These results suggest that surface roughness from grain-boundary grooving affects the pitting resistance more strongly than does the grain boundary density.

  14. Research of the structural and electronic properties of VN/AlN/VN and AlN/VN/AlN based on DFT calculation

    NASA Astrophysics Data System (ADS)

    Díaz F, J. H.; Espitia R, M. J.; Rodriguez Martínez, J. A.

    2016-08-01

    We investigated the structural, electronic, and magnetic properties of AlN/VN/AlN and VN/AlN/VN interlayers in the wurtzite structure, via first-principles calculations using the psuedopotential method within density functional theory (DFT) as implemented in the Quantum ESPRESSO code. The total energy calculation showed that the VN/AlN/VN interlayer is energetically more favorable than the AlN/VN/AlN one. Analysis of the density of states showed that the interlayers exhibit a metallic behavior that essentially comes from the hybridization and polarization of states V-d and N-p across the Fermi level. The interlayers exhibit magnetic properties, with a magnetic moment of 4μβ/cell. Due to these properties, the superlattices can potentially be used in the field of spintronics.

  15. Influence of FeCrAl Content on Microstructure and Bonding Strength of Plasma-Sprayed FeCrAl/Al2O3 Coatings

    NASA Astrophysics Data System (ADS)

    Zhou, Liang; Luo, Fa; Zhou, Wancheng; Zhu, Dongmei

    2016-02-01

    Low-power plasma-sprayed FeCrAl/Al2O3 composite coatings with 1.5 mm thickness have been fabricated for radar absorption applications. The effects of FeCrAl content on the coating properties were studied. The FeCrAl presents in the form of a few thin lamellae and numerous particles, demonstrating relatively even distribution in all the coatings. Results show that the micro-hardness and porosity decrease with the increase in FeCrAl content. With FeCrAl content increasing from 28 to 47 wt.%, the bonding strength of the coatings with 1.5 mm thickness increases from 10.5 to 27 MPa, and the failure modes are composed of cohesive and adhesive failure, which are ascribed to the coating microstructure and the residual stress, respectively.

  16. MCrAlY bond coat with enhanced Yttrium layer

    DOEpatents

    Jablonski, Paul D; Hawk, Jeffrey A

    2015-04-21

    One or more embodiments relates to an MCrAlY bond coat comprising an MCrAlY layer in contact with a Y--Al.sub.2O.sub.3 layer. The MCrAlY layer is comprised of a .gamma.-M solid solution, a .beta.-MAl intermetallic phase, and Y-type intermetallics. The Y--Al.sub.2O.sub.3 layer is comprised of Yttrium atoms coordinated with oxygen atoms comprising the Al.sub.2O.sub.3 lattice. Both the MCrAlY layer and the Y--Al.sub.2O.sub.3 layer have a substantial absence of Y--Al oxides, providing advantage in the maintainability of the Yttrium reservoir within the MCrAlY bulk. The MCrAlY bond coat may be fabricated through application of a Y.sub.2O.sub.3 paste to an MCrAlY material, followed by heating in a non-oxidizing environment.

  17. Motor neuron death in ALS – programmed by astrocytes?

    PubMed Central

    Pirooznia, Sheila K.; Dawson, Valina L.; Dawson, Ted M.

    2014-01-01

    Motor neurons in ALS die via cell-autonomous and non-cell autonomous mechanisms. Using adult human astrocytes and motor neurons, Re et al (2014) discover that familial and sporadic ALS derived human adult astrocytes secrete neurotoxic factors that selectively kill motor neurons through necroptosis, suggesting a new therapeutic avenue. PMID:24607221

  18. Excitation BolsTORs motor neurons in ALS mice.

    PubMed

    Mattson, Mark P

    2013-10-01

    It is unclear why motor neurons selectively degenerate in amyotrophic lateral sclerosis (ALS). Saxena et al. (2013) demonstrate that excitation of motor neurons can prevent their demise in a mouse model of inherited ALS by a mechanism involving the mTOR pathway. PMID:24094096

  19. Laser ablation of Al-Ni alloys and multilayers

    NASA Astrophysics Data System (ADS)

    Roth, Johannes; Trebin, Hans-Rainer; Kiselev, Alexander; Rapp, Dennis-Michael

    2016-05-01

    Laser ablation of Al-Ni alloys and multilayers has been studied by molecular dynamics simulations. The method was combined with a two-temperature model to describe the interaction between the laser beam, the electrons, and the atoms. As a first step, electronic parameters for the alloys had to be found and the model developed originally for pure metals had to be generalized to multilayers. The modifications were verified by computing melting depths and ablation thresholds for pure Al and Ni. Here known data could be reproduced. The improved model was applied to the alloys Al_3Ni, AlNi and AlNi_3. While melting depths and ablation thresholds for AlNi behave unspectacular, sharp drops at high fluences are observed for Al_3Ni and AlNi_3. In both cases, the reason is a change in ablation mechanism from phase explosion to vaporization. Furthermore, a phase transition occurs in Al_3Ni. Finally, Al layers of various thicknesses on a Ni substrate have been simulated. Above threshold, 8 nm Al films are ablated as a whole while 24 nm Al films are only partially removed. Below threshold, alloying with a mixture gradient has been observed in the thin layer system.

  20. 33 CFR 110.65 - Indian River Bay, Del.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false Indian River Bay, Del. 110.65 Section 110.65 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY ANCHORAGES ANCHORAGE REGULATIONS Special Anchorage Areas § 110.65 Indian River Bay, Del. Beginning at a point...

  1. 33 CFR 110.65 - Indian River Bay, Del.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 1 2012-07-01 2012-07-01 false Indian River Bay, Del. 110.65 Section 110.65 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY ANCHORAGES ANCHORAGE REGULATIONS Special Anchorage Areas § 110.65 Indian River Bay, Del. Beginning at a point...

  2. 33 CFR 110.65 - Indian River Bay, Del.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Indian River Bay, Del. 110.65 Section 110.65 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY ANCHORAGES ANCHORAGE REGULATIONS Special Anchorage Areas § 110.65 Indian River Bay, Del. Beginning at a point...

  3. Instantánea del cáncer colorrectal

    Cancer.gov

    Información sobre las tendencias de incidencia, mortalidad y financiamiento del NCI sobre el cáncer colorrectal; así como ejemplos de actividades del NCI y adelantos en la investigación de este tipo de cáncer.

  4. Pastoral del Nino: Bringing the Abundant Life to Paraguayan Children

    ERIC Educational Resources Information Center

    Austin, Ann Berghout; Aquino, Cyle; Burro, Elizabeth

    2007-01-01

    Pastoral del Nino is transforming children's lives in rural Paraguay. Part of Pastoral Social (Catholic Social Services), Pastoral del Nino's primary focus is to bring "vida en abundancia" (the abundant life) to families by ensuring that mothers survive childbirth and children reach their first birthdays. In addition, the organization promotes…

  5. 33 CFR 110.65 - Indian River Bay, Del.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false Indian River Bay, Del. 110.65... ANCHORAGE REGULATIONS Special Anchorage Areas § 110.65 Indian River Bay, Del. Beginning at a point bearing... State highway bridge across Indian River Inlet; thence 174°, 600 feet; thence 264°, 800 feet; thence...

  6. 33 CFR 110.111 - Marina del Rey Harbor, Calif.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false Marina del Rey Harbor, Calif. 110.111 Section 110.111 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY ANCHORAGES ANCHORAGE REGULATIONS Special Anchorage Areas § 110.111 Marina del Rey Harbor, Calif. An area...

  7. Instantánea del sarcoma de Kaposi

    Cancer.gov

    Información sobre las tendencias de incidencia, mortalidad y financiamiento del NCI sobre el sarcoma de Kaposi; así como ejemplos de actividades del NCI y adelantos en la investigación de este tipo de cáncer.

  8. Screw dislocation-induced growth spirals as emissive exciton localization centers in Al-rich AlGaN/AlN quantum wells

    SciTech Connect

    Funato, Mitsuru Banal, Ryan G.; Kawakami, Yoichi

    2015-11-15

    Screw dislocations in Al-rich AlGaN/AlN quantum wells cause growth spirals with an enhanced Ga incorporation, which create potential minima. Although screw dislocations and their surrounding potential minima suggest non-radiative recombination processes within growth spirals, in reality, screw dislocations are not major non-radiative sinks for carriers. Consequently, carriers localized within growth spirals recombine radiatively without being captured by non-radiative recombination centers, resulting in intense emissions from growth spirals.

  9. Ab initio molecular dynamics of Al irradiation-induced processes during Al{sub 2}O{sub 3} growth

    SciTech Connect

    Music, Denis; Nahif, Farwah; Friederichsen, Niklas; Schneider, Jochen M.; Sarakinos, Kostas

    2011-03-14

    Al bombardment induced structural changes in {alpha}-Al{sub 2}O{sub 3} (R-3c) and {gamma}-Al{sub 2}O{sub 3} (Fd-3m) were studied using ab initio molecular dynamics. Diffusion and irradiation damage occur for both polymorphs in the kinetic energy range from 3.5 to 40 eV. However, for {gamma}-Al{sub 2}O{sub 3}(001) subplantation of impinging Al causes significantly larger irradiation damage and hence larger mobility as compared to {alpha}-Al{sub 2}O{sub 3}. Consequently, fast diffusion along {gamma}-Al{sub 2}O{sub 3}(001) gives rise to preferential {alpha}-Al{sub 2}O{sub 3}(0001) growth, which is consistent with published structure evolution experiments.

  10. First-principles investigation of mechanical behavior of B2 type aluminides: FeAl and NiAl

    SciTech Connect

    Fu, C.L.; Yoo, M.H.

    1990-01-01

    First-principles calculations of the elastic constants, shear fault energies, and cleavage strength of NiAl and FeAl are presented. For NiAl, we find that the dissociation of {l angle}111{r angle} superdislocation into partial dislocations is unlikely, due to a high antiphase boundary energy and a weak repulsive elastic force between partial dislocations. FeAl has a high ideal cleavage strength as a result of the directional d-bond formation at the Fe sites. The strong ordering behavior of NiAl is explained in terms of the Al-to-Ni charge transfer and the repulsive interaction between Al atoms. The spontaneous glide decomposition of the {l angle}111{r angle} superdislocation in NiAl is also discussed. 8 refs., 2 figs., 2 tabs.

  11. Interdiffusion and intrinsic diffusion in the NiAl /delta/ phase of the Al-Ni system

    NASA Technical Reports Server (NTRS)

    Shankar, S.; Seigle, L. L.

    1978-01-01

    Interdiffusion coefficients at 950 to 1150 C and the ratio of intrinsic diffusion coefficients at 1100 C were measured as functions of composition in the NiAl (delta) phase of the Al-Ni system, using a vapor-solid technique. Diffusivity values were also obtained for the Ni3Al (epsilon) and Ni (Al) solid solution (zeta) phases from 950 to 1150 C. The interdiffusion coefficient in NiAl (delta) varies several orders of magnitude over the delta phase field with a deep minimum in the diffusivity-composition curve at 48 to 49 at% Al. The ratio of intrinsic diffusion coefficients DNi/DAl, in the delta phase also varies with composition from a value of 3 to 3.5 below 50 at% Al to 0.1 or less above 50 at% Al.

  12. Direct synthesis of nanoporous carbon nitride fibers using Al-based porous coordination polymers (Al-PCPs).

    PubMed

    Hu, Ming; Reboul, Julien; Furukawa, Shuhei; Radhakrishnan, Logudurai; Zhang, Yuanjian; Srinivasu, Pavuluri; Iwai, Hideo; Wang, Hongjing; Nemoto, Yoshihiro; Suzuki, Norihiro; Kitagawa, Susumu; Yamauchi, Yusuke

    2011-07-28

    We report a new synthetic route for preparation of nanoporous carbon nitride fibers with graphitic carbon nitride polymers, by calcination of Al-based porous coordination polymers (Al-PCPs) with dicyandiamide (DCDA) under a nitrogen atmosphere.

  13. Structure of oxides prepared by decomposition of layered double Mg–Al and Ni–Al hydroxides

    SciTech Connect

    Cherepanova, Svetlana V.; Leont’eva, Natalya N.; Arbuzov, Aleksey B.; Drozdov, Vladimir A.; Belskaya, Olga B.; Antonicheva, Nina V.

    2015-05-15

    Abstracts: Thermal decomposition of Mg–Al and Ni–Al layered double hydroxides LDH at temperatures lower than 800 °C leads to the formation of oxides with different structures. Mg–Al oxide has a very defective structure and consists of octahedral layers as in periclase MgO and mixed octahedral–tetrahedral layers as in spinel MgAl{sub 2}O{sub 4}. Mixed Ni–Al oxide has a sandwich-like structure, consisting of a core with Al-doped NiO-like structure and some surface layers with spinel NiAl{sub 2}O{sub 4} structure epitaxial connected with the core. Suggested models were verified by simulation of X-ray diffraction patterns using DIFFaX code, as well as HRTEM, IR-, UV-spectroscopies, and XPS. - Graphical abstract: In the Mg–Al layered double hydroxide Al{sup 3+} ions migrate into interlayers during decomposition. The Mg–Al oxide represents sequence of octahedral and octahedral–tetrahedral spinel layers with vacancies. The Ni–Al oxide has a sandwich-like structure with NiO-like core and surface spinel layers as a result of migration of Al{sup 3+} ions on the surface. The models explain the presence and absence of “memory effect” for the Mg–Al and Ni–Al oxides, respectively. - Highlights: • We study products of Mg(Ni)–Al LDH decomposition by calcination at 500(400)–800 °C. • In Mg–Al/Ni–Al LDH Al ions migrate into interlayers/on the surface during decomposition. • Mg–Al oxide represents sequence of periclase- and spinel-like layers with vacancies. • Ni–Al oxide has a sandwich-like structure with NiO-like core and surface spinel layers. • The models explain the presence/absence of “memory effect” for Mg–Al/Ni–Al oxides.

  14. Role of Tricoordinate Al Sites in CH3ReO3/Al2O3 Olefin Metathesis Catalysts.

    PubMed

    Valla, Maxence; Wischert, Raphael; Comas-Vives, Aleix; Conley, Matthew P; Verel, René; Copéret, Christophe; Sautet, Philippe

    2016-06-01

    Re2O7 supported on γ-alumina is an alkene metathesis catalyst active at room temperature, compatible with functional groups, but the exact structures of the active sites are unknown. Using CH3ReO3/Al2O3 as a model for Re2O7/Al2O3, we show through a combination of reactivity studies, in situ solid-state NMR, and an extensive series of DFT calculations, that μ-methylene structures (Al-CH2-ReO3-Al) containing a Re═O bound to a tricoordinated Al (AlIII) and CH2 bound to a four-coordinated Al (AlIVb) are the precursors of the most active sites for olefin metathesis. The resting state of CH3ReO3/Al2O3 is a distribution of μ-methylene species formed by the activation of the C-H bond of CH3ReO3 on different surface Al-O sites. In situ reaction with ethylene results in the formation of Re metallacycle intermediates, which were studied in detail through a combination of solid-state NMR experiments, using labeled ethylene, and DFT calculations. In particular, we were able to distinguish between metallacycles in TBP (trigonal-bipyramidal) and SP (square-pyramidal) geometry, the latter being inactive and detrimental to catalytic activity. The SP sites are more likely to be formed on other Al sites (AlIVa/AlIVa). Experimentally, the activity of CH3ReO3/Al2O3 depends on the activation temperature of alumina; catalysts activated at or above 500 °C contain more active sites than those activated at 300 °C. We show that the dependence of catalytic activity on the Al2O3 activation temperature is related to the quantity of available AlIII-defect sites and adsorbed H2O.

  15. Role of Tricoordinate Al Sites in CH3ReO3/Al2O3 Olefin Metathesis Catalysts.

    PubMed

    Valla, Maxence; Wischert, Raphael; Comas-Vives, Aleix; Conley, Matthew P; Verel, René; Copéret, Christophe; Sautet, Philippe

    2016-06-01

    Re2O7 supported on γ-alumina is an alkene metathesis catalyst active at room temperature, compatible with functional groups, but the exact structures of the active sites are unknown. Using CH3ReO3/Al2O3 as a model for Re2O7/Al2O3, we show through a combination of reactivity studies, in situ solid-state NMR, and an extensive series of DFT calculations, that μ-methylene structures (Al-CH2-ReO3-Al) containing a Re═O bound to a tricoordinated Al (AlIII) and CH2 bound to a four-coordinated Al (AlIVb) are the precursors of the most active sites for olefin metathesis. The resting state of CH3ReO3/Al2O3 is a distribution of μ-methylene species formed by the activation of the C-H bond of CH3ReO3 on different surface Al-O sites. In situ reaction with ethylene results in the formation of Re metallacycle intermediates, which were studied in detail through a combination of solid-state NMR experiments, using labeled ethylene, and DFT calculations. In particular, we were able to distinguish between metallacycles in TBP (trigonal-bipyramidal) and SP (square-pyramidal) geometry, the latter being inactive and detrimental to catalytic activity. The SP sites are more likely to be formed on other Al sites (AlIVa/AlIVa). Experimentally, the activity of CH3ReO3/Al2O3 depends on the activation temperature of alumina; catalysts activated at or above 500 °C contain more active sites than those activated at 300 °C. We show that the dependence of catalytic activity on the Al2O3 activation temperature is related to the quantity of available AlIII-defect sites and adsorbed H2O. PMID:27140286

  16. 77 FR 73732 - In the Matter of the Amendment of the Designation of al-Qa'ida in Iraq, aka Jam'at al Tawhid wa...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-11

    ... fi Bilad al-Rafidayn, aka The Organization of al-Jihad's Base of Operations in Iraq, aka al-Qaida of Jihad in Iraq, aka al-Qaida in Iraq, aka al-Qaida in Mesopotamia, aka al-Qaida in the Land of the Two Rivers, aka al-Qaida of the Jihad in the Land of the Two Rivers, aka al-Qaida of Jihad......

  17. Imaging spectroscopy with Ta/Al DROIDs: Performance for different Al trapping layer thicknesses

    NASA Astrophysics Data System (ADS)

    Hijmering, R. A.; Verhoeve, P.; Martin, D. D. E.; Peacock, A.; Kozorezov, A. G.

    2006-04-01

    To overcome the limited field of view, which can be achieved with single superconducting tunneling junction (STJ) arrays, distributed read-out imaging devices (DROIDs) are being developed. DROIDs consist of a superconducting absorber strip with proximized STJs on either end. The ratio of the two signals from the STJs provides information on the absorption position, and the sum signal is a measure for the energy of the absorbed photon. In our devices, the absorber is an epitaxial Ta strip that extends underneath the Ta/Al read-out STJs. Thus, the bottom electrode of the STJs is an integral part of the absorber. Due to the proximity effect, the STJs have a lower energy gap than the absorber, causing trapping of quasiparticles (QPs) in the STJs. The trapping will change with thicker Al layers because the energy gap of the devices will decrease. A series of 50×200 μm 2 and 20×200 μm 2 absorbers (including 50×50 μm 2 STJs) and different Al trapping layer thicknesses, ranging from 65 to 130 nm, have been tested. The devices have been illuminated with 6 keV 55Fe photons. The position resolution is found to improve with increasing Al thickness. It is found that the current model needs to be adapted for DROIDs to account for different injection of QPs into the STJ and extra losses to the absorber.

  18. Phase correlations in the CuAlSe2-CuAlTe2 system

    NASA Astrophysics Data System (ADS)

    Korzun, B. V.; Fadzeyeva, A. A.; Bente, K.; Schmitz, W.; Kommichau, G.

    2005-07-01

    Alloys in the CuAlSe2-CuAlTe2 system were synthesized in BN-crucibles in silica tubes under vacuum to obtain the corresponding phase equilibria. X-ray powder diffraction and thermal analytic data of the T-x phase diagram revealed a complete solid solutions series in the subsolidus region. Within the CuAlSe2xTe2(1-x) system the refined lattice parameters a and c approximately obey the Vegard rule and also the cell volume and the heat of fusion confirm linear correlations with the composition of the mixed crystals. The anion position parameter calculated after S. C. Abrahams & J. L. Bernstein (uAB) and J. E Jaffe & A. Zunger (uJZ) is greater than 0.25 and reveals a linear dependence on composition. The liquidus part of the CuAlSe2xTe2(1-x) system with x < 0.35 exhibits vertical section behaviour with a ternary peritectic followed up by a ternary monotectic whereas the region with x > 0.35 shows quasibinary equilibria.

  19. Aesthetic Leadership (AL): Development and Implementation of Aesthetic Leadership Scale (ALS) of the School Directors

    ERIC Educational Resources Information Center

    Polat, Soner; Oztoprak-Kavak, Zehra

    2011-01-01

    This study aims to develop a scale for measuring the aesthetic leadership (AL) characteristics of the school directors and to show that it can be applicable. The population of the study is composed of the teachers who are on duty in the elementary, secondary and high schools located in Izmit, Kocaeli. Sample of this descriptive study comprises 400…

  20. Magnetization anomaly of Nb3Al strands and instability of Nb3Al Rutherford cables

    SciTech Connect

    Yamada, Ryuji; Kikuchi, Akihiro; Wake, Masayoshi; /KEK, Tsukuba

    2006-08-01

    Using a Cu stabilized Nb{sub 3}Al strand with Nb matrix, a 30 meter long Nb{sub 3}Al Rutherford cable was made by a collaboration of Fermilab and NIMS. Recently the strand and cable were tested. In both cases instability was observed at around 1.5 Tesla. The magnetization of this Nb{sub 3}Al strand was measured first using a balanced coil magnetometer at 4.2 K. Strands showed an anomalously large magnetization behavior around at 1.6 T, which is much higher than the usual B{sub c2} {approx} 0.5 Tesla (4.2 K) of Nb matrix. This result is compared with the magnetization data of short strand samples using a SQUID magnetometer, in which a flux-jump signal was observed at 0.5 Tesla, but not at higher field. As a possible explanation for this magnetization anomaly, the interfilament coupling through the thin Nb films in the strands is suggested. The instability problem observed in low field tests of the Nb{sub 3}Al Rutherford cables is attributed to this effect.

  1. Applications and non-idealities of submicron Al-AlOx-Nb tunnel junctions

    NASA Astrophysics Data System (ADS)

    Julin, J. K.; Maasilta, I. J.

    2016-10-01

    We have developed a technique to fabricate sub-micron, 0.6 μ {{m}}× 0.6 μ {{m}} Al-AlOx-Nb tunnel junctions using a standard e-beam resist, angle evaporation and double oxidation of the tunneling barrier, resulting in high quality niobium, as determined by the the high measured values of the critical temperature {T}{{C}}˜ 7.5 K and the gap {{Δ }}˜ 1.3 meV. The devices show great promise for local nanoscale thermometry in the temperature range 1-7.5 K. Electrical characterization of the junctions was performed at sub-Kelvin temperatures both with and without an external magnetic field, which was used to suppress superconductivity in Al and thus bring the junction into a normal-metal-insulator-superconductor configuration. We observed excess sub-gap current, which could not be explained by the standard tunneling theory. Evidence points towards materials science issues of the barrier or Nb/AlOx interface as the culprit.

  2. High Temperature Mechanical Characterization and Analysis of Al2O3 /Al2O3 Composition

    NASA Technical Reports Server (NTRS)

    Gyekenyesi, John Z.; Jaskowiak, Martha H.

    1999-01-01

    Sixteen ply unidirectional zirconia coated single crystal Al2O3 fiber reinforced polycrystalline Al2O3 was tested in uniaxial tension at temperatures to 1400 C in air. Fiber volume fractions ranged from 26 to 31%. The matrix has primarily open porosity of approximately 40%. Theories for predicting the Young's modulus, first matrix cracking stress, and ultimate strength were applied and evaluated for suitability in predicting the mechanical behavior of Al2O3/Al2O3 composites. The composite exhibited pseudo tough behavior (increased area under the stress/strain curve relative to monolithic alumina) from 22 to 1400 C. The rule-of-mixtures provides a good estimate of the Young's modulus of the composite using the constituent properties from room temperature to approximately 1200 C for short term static tensile tests in air. The ACK theory provides the best approximation of the first matrix cracking stress while accounting for residual stresses at room temperature. Difficulties in determining the fiber/matrix interfacial shear stress at high temperatures prevented the accurate prediction of the first matrix cracking stress above room temperature. The theory of Cao and Thouless, based on Weibull statistics, gave the best prediction for the composite ultimate tensile strength.

  3. Enhanced TC in granular and thin film Al-Al2O3 nanostructures

    NASA Astrophysics Data System (ADS)

    Higgins, J. S.; Greene, R. L.

    It is known since the 1970s that the superconducting transition temperature of granular aluminum films can be as high as two to three times the transition temperature of bulk aluminum, depending on the grain size and how strongly the nanometer size grains are connected1,2. As the strength of the grain connectivity becomes increasingly weak, the enhanced TC is suppressed. The mechanism behind this enhancement is still under debate. Recently, work on larger aluminum nanoparticles (18nm) embedded in an insulating Al2O3 matrix showed an onset of the superconducting transition as high as three times that of bulk aluminum3. In this situation, the Al grains are electrically disconnected and in a regime far removed from that of the granular films. Here we compare the two situations through electronic and thermal measurements in order to help elucidate the mechanism behind the enhancements. 1S. Pracht, et al., arXiv:1508.04270v1 [cond-mat.supr-con] (2015). 2G. Deutscher, New Superconductors From Granular to High TC, New Jersey: World Scientific, 2006, p. 72-74. 3V. N. Smolyaninova, et al., Sci. Rep. 5, 15777 (2015). Funding by NSF DMR # 1410665.

  4. NiAl powder alloys: II. Compacting of NiAl powders produced by various methods

    NASA Astrophysics Data System (ADS)

    Skachkov, O. A.; Povarova, K. B.; Drozdov, A. A.; Morozov, A. E.

    2012-05-01

    The technological properties of granulated NiAl powders produced by gas spraying of melts and NiAl powders produced by calcium hydride reduction (CHR) of mixtures of nickel and aluminum oxides are compared. The possibilities of production of compact workpieces from these powders using hydrostatic pressing, hot pressing, hot isostatic pressing, and hot extrusion are estimated. To improve compressibility, preliminary milling and/or mechanical activation of the powders are proposed. The strength properties of NiAl rods with a diameter of 20 mm extruded from a temperature of 1100°C and made from the granulated powders are slightly higher than those made from the CHR powders. At temperatures higher than 800°C the properties becomes similar. Transition point t d.b from the ductile to brittle state of samples made from powders sprayed in nitrogen and argon is 100-150°C higher than those made from the CHR powders. The difference in the mechanical properties is caused by the structural and chemical microheterogeneity of granules (microingots), which is inherited in the rods after hot deformation and annealing at 1200-1400°C and is (0.67-0.88) T m NiAl ( T m is the melting point, K).

  5. Al(fcc):Al{sub 3}Sc(L1{sub 2}) interphase boundary energy calculations

    SciTech Connect

    Hyland, R.W. Jr.; Rohrer, C.L.; Asta, M.; Foiles, S.M.

    1998-06-12

    These calculations assess the applicability of classical nucleation theory to the reaction f.c.c. {r_arrow} L1{sub 2} occurring in dilute Al-Sc alloys. The orientation and temperature dependence of the energies of coherent Al(f.c.c.):Al{sub 3}Sc(L1{sub 2}) interphase boundaries were studied using atomistic simulation and a low temperature expansion (LTE) of the grand potential. Embedded atom method potentials were developed for both sets of calculations. Atomistic 0 K results for the anisotropy of the interphase boundary enthalpy gave {gamma}{sub (100)} < {gamma}{sub (110)} < {gamma}{sub (111)} with values of 32.5, 51.3, and 66.3 mJ/m{sup 2}, respectively. LTE calculations of the excess grand potential of the (100) interface predicted a nearly temperature independent interfacial energy below 400 K that decreased modestly above 400 K. Monte Carlo (MC) simulations produced a compositional diffuseness of about 4 atomic layers separating the two bulk phases. Because the spatial extent of this region is very similar to the classically determined critical nucleus dimensions extracted from nucleation rate data, it is concluded that critical nuclei of Al{sub 3}Sc are most likely of nonclassical design at high undercooling.

  6. Electronic transport through Al/InN nanowire/Al junctions

    DOE PAGESBeta

    Lu, Tzu -Ming; Wang, George T.; Pan, Wei; Zhao, S.; Mi, Z.

    2016-02-01

    We report non-linear electronic transport measurement of Al/Si-doped n-type InN nanowire/Al junctions performed at T = 0.3 K, below the superconducting transition temperature of the Al electrodes. The proximity effect is observed in these devices through a strong dip in resistance at zero bias. In addition to the resistance dip at zero bias, several resistance peaks can be identified at bias voltages above the superconducting gap of the electrodes, while no resistance dip is observed at the superconducting gap. The resistance peaks disappear as the Al electrodes turn normal beyond the critical magnetic field except one which remains visible atmore » fields several times higher than critical magnetic field. An unexpected non-monotonic magnetic field dependence of the peak position is observed. As a result, we discuss the physical origin of these observations and propose that the resistance peaks could be the McMillan-Rowell oscillations arising from different closed paths localized near different regions of the junctions.« less

  7. Cyclic Oxidation of FeCrAlY/Al2O3 Composites

    NASA Technical Reports Server (NTRS)

    Nesbitt, James A.; Draper, Susan L.; Barrett, Charles A.

    1999-01-01

    Three-ply FeCrAlY/Al2O3 composites and FeCrAlY matrix-only samples were cyclically oxidized at 1000 C and 1100 C for up to 1000 1-hr cycles. Fiber ends were exposed at the ends of the composite samples. Following cyclic oxidation, cracks running parallel to and perpendicular to the fibers were observed on the large surface of the composite. In addition, there was evidence of increased scale damage and spallation around the exposed fiber ends, particularly around the middle ply fibers. This damage was more pronounced at the higher temperature. The exposed fiber ends showed cracking between fibers in the outer plies, occasionally with Fe and Cr-rich oxides growing out of the cracks. Large gaps developed at the fiber/matrix interface around many of the fibers, especially those in the outer plies. Oxygen penetrated many of these gaps resulting in significant oxide formation at the fiber/matrix interface far within the composite sample. Around several fibers, the matrix was also internally oxidized showing Al2O3 precipitates in a radial band around the fibers. The results show that these composites have poor cyclic oxidation resistance due to the CTE mismatch and inadequate fiber/matrix bond strength at temperatures of 1000 C and above.

  8. Adhesion strength and nucleation thermodynamics of four metals (Al, Cu, Ti, Zr) on AlN substrates

    NASA Astrophysics Data System (ADS)

    Tao, Yuan; Ke, Genshui; Xie, Yan; Chen, Yigang; Shi, Siqi; Guo, Haibo

    2015-12-01

    Devices based on AlN generally require adherent and strong interfaces between AlN and other materials, whereas most metals are known to be nonwetting to AlN and form relatively weak interfaces with AlN. In this study, we selected four representative metals (Al, Cu, Ti, and Zr) to study the adhesion strength of the AlN/metal interfaces. Mathematical models were constructed between the adhesion strength and enthalpy of formation of Al-metal solid solutions, the surface energies of the metals, and the lattice mismatch between the metals and AlN, based on thermodynamic parameters calculated using density functional theory. It appears that the adhesion strength is mainly determined by the lattice mismatch, and is in no linear correlation with either the Al-metal solution's formation enthalpies or the metals' surface energies. We also investigated the nucleation thermodynamics of the four metals on AlN substrates. It was found that Ti forms the strongest interface with AlN, and has the largest driving force for nucleation on AlN substrates among the four metals.

  9. Revealing heterogeneous nucleation of primary Si and eutectic Si by AlP in hypereutectic Al-Si alloys.

    PubMed

    Li, Jiehua; Hage, Fredrik S; Liu, Xiangfa; Ramasse, Quentin; Schumacher, Peter

    2016-04-28

    The heterogeneous nucleation of primary Si and eutectic Si can be attributed to the presence of AlP. Although P, in the form of AlP particles, is usually observed in the centre of primary Si, there is still a lack of detailed investigations on the distribution of P within primary Si and eutectic Si in hypereutectic Al-Si alloys at the atomic scale. Here, we report an atomic-scale experimental investigation on the distribution of P in hypereutectic Al-Si alloys. P, in the form of AlP particles, was observed in the centre of primary Si. However, no significant amount of P was detected within primary Si, eutectic Si and the Al matrix. Instead, P was observed at the interface between the Al matrix and eutectic Si, strongly indicating that P, in the form of AlP particles (or AlP 'patch' dependent on the P concentration), may have nucleated on the surface of the Al matrix and thereby enhanced the heterogeneous nucleation of eutectic Si. The present investigation reveals some novel insights into heterogeneous nucleation of primary Si and eutectic Si by AlP in hypereutectic Al-Si alloys and can be used to further develop heterogeneous nucleation mechanisms based on adsorption.

  10. Enhancing phosphate adsorption by Mg/Al layered double hydroxide functionalized biochar with different Mg/Al ratios.

    PubMed

    Li, Ronghua; Wang, Jim J; Zhou, Baoyue; Awasthi, Mukesh Kumar; Ali, Amjad; Zhang, Zengqiang; Gaston, Lewis A; Lahori, Altaf Hussain; Mahar, Amanullah

    2016-07-15

    Mg/Al ratio plays a significant role for anion adsorption by Mg/Al-layered double hydroxides (Mg/Al-LDHs) modified biochar. In this study, Mg/Al-LDHs biochar with different Mg/Al ratios (2, 3, 4) were prepared by co-precipitation for phosphate removal from aqueous solution. Factors on phosphate adsorption including Mg/Al ratio, pH, and the presence of other inorganic anions were investigated through batch experiments. Increasing Mg/Al ratio in the Mg/Al-LDHs biochar composites generally enhanced phosphate adsorption with Langmuir adsorption maximum calculated at 81.83mg phosphorous (P) per gram of 4:1Mg/Al-LDHs biochar at pH3.0. The adsorption process was best described by the pseudo-second-order kinetic model. Solution pH had greater effects on the phosphate adsorption by Mg/Al LDHs biochar composites with lower Mg/Al ratios. The presence of other inorganic anions decreased the phosphate adsorption efficiency in the order of F(-) > SO4(2-) > NO2(-) >Cl(-). Phosphate adsorption mechanism involves ion exchange, electrostatic attraction and surface inner-sphere complex formation. Overall, Mg/Al-LDHs biochar composites offer a potential alternative of carbon-based adsorbent for phosphate removal from aqueous solution. PMID:27058131

  11. Revealing heterogeneous nucleation of primary Si and eutectic Si by AlP in hypereutectic Al-Si alloys.

    PubMed

    Li, Jiehua; Hage, Fredrik S; Liu, Xiangfa; Ramasse, Quentin; Schumacher, Peter

    2016-01-01

    The heterogeneous nucleation of primary Si and eutectic Si can be attributed to the presence of AlP. Although P, in the form of AlP particles, is usually observed in the centre of primary Si, there is still a lack of detailed investigations on the distribution of P within primary Si and eutectic Si in hypereutectic Al-Si alloys at the atomic scale. Here, we report an atomic-scale experimental investigation on the distribution of P in hypereutectic Al-Si alloys. P, in the form of AlP particles, was observed in the centre of primary Si. However, no significant amount of P was detected within primary Si, eutectic Si and the Al matrix. Instead, P was observed at the interface between the Al matrix and eutectic Si, strongly indicating that P, in the form of AlP particles (or AlP 'patch' dependent on the P concentration), may have nucleated on the surface of the Al matrix and thereby enhanced the heterogeneous nucleation of eutectic Si. The present investigation reveals some novel insights into heterogeneous nucleation of primary Si and eutectic Si by AlP in hypereutectic Al-Si alloys and can be used to further develop heterogeneous nucleation mechanisms based on adsorption. PMID:27120994

  12. Revealing heterogeneous nucleation of primary Si and eutectic Si by AlP in hypereutectic Al-Si alloys

    PubMed Central

    Li, Jiehua; Hage, Fredrik S.; Liu, Xiangfa; Ramasse, Quentin; Schumacher, Peter

    2016-01-01

    The heterogeneous nucleation of primary Si and eutectic Si can be attributed to the presence of AlP. Although P, in the form of AlP particles, is usually observed in the centre of primary Si, there is still a lack of detailed investigations on the distribution of P within primary Si and eutectic Si in hypereutectic Al-Si alloys at the atomic scale. Here, we report an atomic-scale experimental investigation on the distribution of P in hypereutectic Al-Si alloys. P, in the form of AlP particles, was observed in the centre of primary Si. However, no significant amount of P was detected within primary Si, eutectic Si and the Al matrix. Instead, P was observed at the interface between the Al matrix and eutectic Si, strongly indicating that P, in the form of AlP particles (or AlP ‘patch’ dependent on the P concentration), may have nucleated on the surface of the Al matrix and thereby enhanced the heterogeneous nucleation of eutectic Si. The present investigation reveals some novel insights into heterogeneous nucleation of primary Si and eutectic Si by AlP in hypereutectic Al-Si alloys and can be used to further develop heterogeneous nucleation mechanisms based on adsorption. PMID:27120994

  13. Strong adsorption of Al-doped carbon nanotubes toward cisplatin

    NASA Astrophysics Data System (ADS)

    Li, Wei; Li, Guo-Qing; Lu, Xiao-Min; Ma, Juan-Juan; Zeng, Peng-Yu; He, Qin-Yu; Wang, Yin-Zhen

    2016-08-01

    The adsorption of cisplatin molecule on Al-doped CNTs is investigated using density functional theory. The obtained results indicate that Al-doped carbon nanotubes can strongly absorb cisplatin. After absorbing cisplatin, the symmetry of CNTs has some changes. We innovatively defined a parameter of symmetry variation which relates to the adsorption. By analyzing the electronic structure, it can be concluded that under the circumstance that cisplatin was absorbed by Al-doped CNTs through aluminum atom of Al-doped CNTs. In conclusion, Al-doped CNTs is a kind of potential delivery carrier with high quality for anticancer drug cisplatin.

  14. Probing Galactic 26Al with Exotic Ion Beams

    SciTech Connect

    Chen, Alan A.

    2006-07-12

    The goal of understanding the production of galactic 26Al brings together progress in nuclear astrophysics from observations, theory, meteoritics, and laboratory experiments. In the case of experimental work, nuclear reactions involving unstable isotopes are being studied to elucidate the production of 26Al in stellar explosive nucleosynthesis. We discuss a direct measurement of the 26Al(p,{gamma})27Si reaction with the DRAGON collaboration at TRIUMF, and a measurement of 25Al+p elastic scattering with the CRIB (CNS-U.Tokyo) collaboration, toward constraining the 25Al(p,{gamma})26Si reaction.

  15. Room temperature luminescence and ferromagnetism of AlN:Fe

    NASA Astrophysics Data System (ADS)

    Li, H.; Cai, G. M.; Wang, W. J.

    2016-06-01

    AlN:Fe polycrystalline powders were synthesized by a modified solid state reaction (MSSR) method. Powder X-ray diffraction and transmission electron microscopy results reveal the single phase nature of the doped samples. In the doped AlN samples, Fe is in Fe2+ state. Room temperature ferromagnetic behavior is observed in AlN:Fe samples. Two photoluminescence peaks located at about 592 nm (2.09 eV) and 598 nm (2.07 eV) are observed in AlN:Fe samples. Our results suggest that AlN:Fe is a potential material for applications in spintronics and high power laser devices.

  16. Probing Galactic 26Al with Exotic Ion Beams

    NASA Astrophysics Data System (ADS)

    Chen, Alan A.

    2006-07-01

    The goal of understanding the production of galactic 26Al brings together progress in nuclear astrophysics from observations, theory, meteoritics, and laboratory experiments. In the case of experimental work, nuclear reactions involving unstable isotopes are being studied to elucidate the production of 26Al in stellar explosive nucleosynthesis. We discuss a direct measurement of the 26Al(p,γ)27Si reaction with the DRAGON collaboration at TRIUMF, and a measurement of 25Al+p elastic scattering with the CRIB (CNS-U.Tokyo) collaboration, toward constraining the 25Al(p,γ)26Si reaction.

  17. R-loops highlight the nucleus in ALS.

    PubMed

    Salvi, Jayesh S; Mekhail, Karim

    2015-01-01

    Amyotrophic lateral sclerosis (ALS) is a severely debilitating neurodegenerative disease linked to mutations in various genes implicated in cytoplasmic RNA metabolism. Recent studies from genetic models have also helped reveal connections between various ALS-linked factors and RNA-DNA hybrid (R-loop) regulation. Here, we examine how such hybrid-regulatory processes are pointing to a key role for the nucleus in ALS. We also present a potential molecular mechanism in which hybrids may represent at least one of the long sought after missing links between different ALS genes. Our opinion is that RNA-DNA hybrids will play a key role in deciphering ALS and other human diseases.

  18. Creep in Directionally Solidified NiAl-Mo Eutectics

    SciTech Connect

    Dudova, Marie; Kucharova, Kveta; Bartak, Tomas; Bei, Hongbin; George, Easo P; Somsen, Ch.; Dlouhy, A.

    2011-01-01

    A directionally solidified NiAl-Mo eutectic and an NiAl intermetallic, having respective nominal compositions Ni-45.5Al-9Mo and Ni-45.2Al (at.%), were loaded in compression at 1073 and 1173 K. Formidable strengthening by regularly distributed Mo fibres (average diameter 600 nm, volume fraction 14%) was observed. The fibres can support compression stresses transferred from the plastically deforming matrix up to a critical stress of the order of 2.5 GPa, at which point they yield. Microstructural evidence is provided for the dislocation-mediated stress transfer from the NiAl to the Mo phase.

  19. In situ investigation of spinodal decomposition in hypermonotectic Al Bi and Al Bi Zn alloys

    NASA Astrophysics Data System (ADS)

    Schaffer, P. L.; Mathiesen, R. H.; Arnberg, L.; Di Sabatino, M.; Snigirev, A.

    2008-05-01

    Spinodal decomposition of hypermonotectic Al-6 wt.%Bi, Al-8 wt.%Bi and Al-6 wt.%Bi-8 wt.%Zn alloys has been investigated using synchrotron radiography. In the case of the 6 and 8 wt.%Bi binary alloys undercoolings of 70 and 110 K, respectively, were required to initiate the L→L1+L2 reaction, which appeared to occur very close to the monotectic reaction temperature. The nucleated L2 droplets were set in collective size-dependent motion by forces coupled to external fields (gravity and imposed temperature gradient) as well as forces arising due to internal fluctuations of the system. With experimental conditions similar to those realized during strip casting of the same materials, it was found that the size-dependant droplet velocity field combined with Stokes drag at the L1-L2 interfaces as well as attractive and repulsive diffusion-coupling between adjacent L2 droplets, yield complex meso- to microscale hydrodynamics. The hydrodynamics are the dominating mechanisms for L2 droplet coagulation, and are accordingly decisive for the final size distribution and geometrical dispersion of the soft Bi-rich component in the cast material. A different decomposition mode was observed in the Al-6 wt.%Bi-8 wt.%Zn ternary alloy, with the L2 droplets undergoing an immiscible-miscible-immiscible transition. In contrast to what was found for the binaries, L2 domains formed at relatively small undercoolings, and very little droplet motion was observed, as all L2 domains nucleated and remained on the crucible walls until they encroached on the monotectic front. At small distances from the monotectic front a Zn-rich solute boundary layer preceding the α-Al, caused the L2 domains to dissolve as Bi-Zn-Al regains complete miscibility upon reaching a critical Zn-concentration. In the shallow mush region behind the monotectic reaction, a high Zn solid solubility and a relatively fast diffusion of Zn in α-Al combine to cause a rapid diminishing Zn concentration in the mush liquid

  20. Low Alpha Experiments at the ALS

    SciTech Connect

    Robin, D.; Alvis, R.; Jackson, A.; Holtzapple, R.; Podobedov, B.

    1996-04-01

    We present a modified, low alpha lattice for the Advanced Light Source where the quadrupole field strengths have been detuned to allow the momentum compaction factor to be varied smoothly from positive to negative values. With this low alpha lattice we decrease the momentum compaction factor by a factor of 5, to 0.0003 over normal operation, resulting in a measured bunch length reduction by a factor of 2. We also measure the size of the second-order momentum compaction factor as well as store beam in a negative momentum compaction lattice. Streak camera measurements at positive and negative momentum compaction operation show longitudinal beam profile distributions that are in agreement with simulations by Fang {ital et} {ital al}. (8). {copyright} {ital 1996 American Institute of Physics.}

  1. Low alpha experiments at the ALS

    SciTech Connect

    Robin, D.; Alvis, R.; Jackson, A.; Holtzapple, R.; Podobedov, B.

    1995-08-01

    The authors present a modified, low alpha lattice for the Advanced Light Source where the quadrupole field strengths have been detuned to allow the momentum compaction factor to be varied smoothly from positive to negative values. With this low alpha lattice the authors decrease the momentum compaction factor by a factor of 5 to 0.0003 over normal operation resulting in a measured bunch length reduction of 2. They also measure the size the second order momentum compaction factor as well as store beam in a negative momentum compaction lattice. Streak camera measurements at positive and negative momentum compaction operation show longitudinal beam profile distributions that are in agreement with simulations by Fang et al.

  2. AlNb-Based Titanium Aluminide

    NASA Astrophysics Data System (ADS)

    Zhang, Kezhao; Liu, Ming; Lei, Zhenglong; Chen, Yanbin

    2014-10-01

    The microstructure of laser-tungsten inert gas hybrid welded Ti2AlNb-based joints and their tensile properties at room temperature were investigated in this paper. The results showed that good-quality joints could be obtained by hybrid welding process. The microstructure evolution was identified by means of optical microscopy, scanning electron microscopy, x-ray diffraction, and transmission electron microscopy. The fusion zone mainly consisted of B2 phase due to the rapid cooling rate, as well as high Nb content. The phase compositions of the heat-affected zone were varied with different thermal cycles during the welding process. Tensile tests at room temperature showed that fracture tended to occur in the fusion zone, and the tensile strength and elongation were 950 MPa and 4.3%, respectively. The fracture mode was quasi-cleavage based on the observation of the fracture morphology.

  3. Removal of phosphate from water using six Al-, Fe-, and Al-Fe-modified bentonite adsorbents.

    PubMed

    Shanableh, Abdallah M; Elsergany, Moetaz M

    2013-01-01

    This study was part of a larger effort that involves evaluating alternatives to upgrading secondary treatment systems in the United Arab Emirates for the removal of nutrients. In this study, six modified bentonite (BNT) phosphate adsorbents were prepared using solutions that contained hydroxy-polycations of aluminum (Al-BNT), iron (Fe-BNT), and mixtures of aluminum and iron (Al-Fe-BNT). The adsorption kinetics and capacities of the six adsorbents were evaluated, and the adsorbents were used to remove phosphorus from synthetic phosphate solutions and from treated wastewater. The experimental adsorption kinetics results were well represented by the pseudo-second-order kinetic model, with R(2) values ranging from 0.99 to 1.00. Similarly, the experimental equilibrium adsorption results were well represented by the Freundlich and Langmuir isotherms, with R(2) values ranging from 0.98 to 1.00. The adsorption capacities of the adsorbents were dependent on the BNT preparation conditions; the types, quantities and combination of metals used; BNT particle size; and adsorption pH. The Langmuir maximum adsorption capacities of the six adsorbents ranged from 8.9-14.5 mg P/g-BNT. The results suggested that the BNT preparations containing Fe alone or in combination with Al achieved higher adsorption capacities than the preparations containing only Al. However, the Al-BNT preparations exhibited higher adsorption rates than the Fe-BNT preparation. Three of the six adsorbents were used to remove phosphate from secondarily treated wastewater samples, and the removal results were comparable to those obtained using synthetic phosphate solutions. The BNT adsorbents also exhibited adequate settling characteristics and significant regeneration potential.

  4. Infiltration of Saffil alumina fiber with AlCu and AlSi alloys

    SciTech Connect

    Garbellini, O.; Morando, C.; Biloni, H.; Palacio, H. . Inst. de Fisica de Materiales)

    1999-06-18

    Currently there is a considerable scientific and technological interest in the composite materials, which a strong ceramic reinforcement is incorporated into a metal matrix (MMC) to tailor its properties for specific applications. Among the various techniques for fabricating MMC, the liquid metal infiltration process by means of a pressurized gas is an attractive fabrication route for near net shaped metal matrix composite and has been successfully used to fabricate Al, Mg and more recently, Ni and Ni aluminide matrix composites, which can be reinforced by SiC or Al[sub 2]O[sub 3] particles, whiskers, or short fibers. This paper describes the experimental technique used and presents an experimental investigation of the effects of the process parameters employed, such as the preform and melt temperatures, the volume fraction of fibers in the preform and the applied pressure upon the infiltration length of a chopped preform during a unidirectional infiltration aided by gas pressure casting. The experiments of the present work were conducted to provide kinetic data with a view to optimizing the selection of the process initial conditions for infiltration which have an effect on the infiltration length of the molten matrix alloy into a preform and it is a first step in investigating the correlation between the infiltration length (fluidity) of AlCuSi matrix alloys and the microstructure of the composites fabricated by pressure casting. For this purpose, this paper focuses on AlCu and AlSi matrix alloys reinforced by short-fibers [delta]-alumina SAFFIL. The experiments reported here were performed with the fibers initially at a temperature significantly below the metal melting point. This is the case of practical interest for the fabrication of many fiber-reinforced metal components.

  5. Tribological properties of thermally sprayed TiAl-Al2O3 composite coating

    NASA Astrophysics Data System (ADS)

    Salman, A.; Gabbitas, B.; Li, J.; Zhang, D.

    2009-08-01

    The use of thermal spray coatings provides protection to the surfaces operating in severe environments. The main goal of the current work is to investigate the possibility of using a high velocity oxy fuel (HVOF) thermally sprayed wear resistant TiAl/Al2O3 coating on tool steel (H13) which is used for making dies for aluminium high pressure die casting. A feedstock of TiAl/Al2O3 composite powder was produced from a mixture of Al and TiO2 powders by high energy mechanical milling, followed by a thermal reaction process. The feedstock was then thermally sprayed using a high velocity oxy-fuel (HVOF) technique onto H13 steel substrates to produce a composite coating. The present study describes and compares the tribological properties such as friction and sliding wear rate of the coating both at room and high temperature (700°C). The results showed that the composite coating has lower wear rate at high temperature (700°C) than the uncoated H13 sample. At Room temperature without using lubricant there is no much significant difference between the wear rate of the coated and uncoated samples. The experimental results showed that the composite coating has great potential for high temperature application due to its lower wear rate at high temperature in comparison with the uncoated sample at the same temperature. The composite coating was characterized using scanning electron microscopy (SEM), optical microscopy and X-ray diffractometry (XRD). This paper reports the experimental observations and discusses the wear resistance performance of the coatings at room and high temperatures.

  6. Assessment of the Heavy Metals in Al Asfar Lake, Al-Hassa, Saudi Arabia.

    PubMed

    Hussein, Adel H A; El Mahmoudi, Ahmed S; Al Naeem, Ahmed A

    2016-02-01

    Al Asfar Lake is a shallow wetland and habitat for wildlife and birds in a desert environment. The water of this lake is originated from the drainage water collected by earthen drainage network and discharged into the lake. The purpose of this study was to assess physico- chemical characteristics and some of heavy metals in Al Asfar lake water. The studied parameters are iron, manganese, copper, zinc, cadmium, chromium, lead, pH, electrical conductivity, and nitrate. Forty-five surface water samples were collected in March 2013. The results revealed that the pH ranged from 7.33 to 8.67, electrical conductivity ranged from 8.28 to 11.34 dS/m, and NO(3)(-) ranged from 0.84 to 2.29 mg/L. In addition, heavy metals concentrations in water were found in the following order: Fe > Mn > Cu > Zn > Cd > Cr = Pb. The mean concentrations of heavy metals in surface water of Al Asfar lake ranged from 0.027 to 0.159 ppm, 0.007 to 0.142 ppm, 0.005 to 0.017 ppm, 0.005 to 0.066 ppm, 0.001 to 0.033 ppm, 0 ppm, and 0 ppm for iron, manganese, copper, zinc, cadmium, chromium, and lead, respectively. Moreover, pH, NO(3)(-), Fe, Mn, and Zn concentrations in the surface water of Al Asfar Lake were found to be within the international permissible limits. On the other hand, Cu and Cd concentrations exceeded the international permissible limits. The high level of some parameters of the measured heavy metals could be attributed to the contamination of Al Asfar Lake with discharge water enriched with chemical fertilizers in addition to domestic and industrial effluents. PMID:26803101

  7. Surface structures of Al-Pd-Mn and Al-Cu-Fe icosahedral quasicrystals

    SciTech Connect

    Shen, Z.

    1999-02-12

    In this dissertation, the author reports on the surface structure of i-Al-Pd-Mn twofold, threefold, fivefold and i-Al-Cu-Fe fivefold surfaces. The LEED studies indicate the existence of two distinct stages in the regrowth of all four surfaces after Ar{sup +} sputtering. In the first stage, upon annealing at relatively low temperature: 500K--800K (depending on different surfaces), a cubic phase appears. The cubic LEED patterns transform irreversibly to unreconstructed quasicrystalline patterns upon annealing to higher temperatures, indicating that the cubic overlayers are metastable. Based upon the data for three chemically-identical, but symmetrically-inequivalent surfaces, a model is developed for the relation between the cubic overlayers and the quasicrystalline substrate. The model is based upon the related symmetries of cubic close-packed and icosahedral-packed materials. These results may be general among Al-rich, icosahedral materials. STM study of Al-Pd-Mn fivefold surface shows that terrace-step-kink structures start to form on the surface after annealing above 700K. Large, atomic ally-flat terraces were formed after annealing at 900K. Fine structures with fivefold icosahedral symmetry were found on those terraces. Data analysis and comparison of the STM images and structure model of icosahedral Al-Pd-Mn suggest that the fine structures in the STM images may be the pseudo Mackay (PMI) clusters which are the structure units of the structure model. Based upon his results, he can conclude that quasicrystalline structures are the stable structures of quasicrystal surfaces. In other words, quasicrystalline structures extend from the bulk to the surface. As a result of the effort reported in this dissertation, he believes that he has increased his understanding of the surface structure of icosahedral quasicrystals to a new level.

  8. Surface Energy and Work Function Control of AlOx/Al Surfaces by Fluorinated Benzylphosphonic Acids.

    PubMed

    Abraham, Ffion; Ford, William E; Scholz, Frank; Nelles, Gabriele; Sandford, Graham; von Wrochem, Florian

    2016-05-11

    The performance of organic electronic devices can be significantly improved by modifying metal electrodes with organic monolayers, which alter the physical and chemical nature of the interface between conductor and semiconductor. In this paper we examine a series of 12 phosphonic acid compounds deposited on the native oxide layer of aluminum (AlOx/Al), an electrode material with widespread applications in organic electronics. This series includes dodecylphosphonic acid as a reference and 11 benzylphosphonic acids, seven of which are fluorinated, including five newly synthesized derivatives. The monolayers are experimentally characterized by contact angle goniometry and by X-ray photoemission spectroscopy (XPS), and work function data obtained by low-intensity XPS are correlated with molecular dipoles obtained from DFT calculations. We find that monolayers are formed with molecular areas ranging from 17.7 to 42.9 Å(2)/molecule, and, by the choice of appropriate terminal groups, the surface energy can be tuned from 23.5 mJ/m(2) to 70.5 mJ/m(2). Depending on the number and position of fluorine substituents on the aromatic rings, a variation in the work function of AlOx/Al substrates over a range of 0.91 eV is achieved, and a renormalization procedure based on molecular density yields a surprising agreement of work function changes with interface dipoles as expected from Helmholtz' equation. The ability to adjust energetics and adhesion at organic semiconductor/AlOx interfaces has immediate applications in devices such as OLEDs, OTFTs, organic solar cells, and printed organic circuits.

  9. The immiscibility of InAlN ternary alloy

    PubMed Central

    Zhao, Guijuan; Xu, Xiaoqing; Li, Huijie; Wei, Hongyuan; Han, Dongyue; Ji, Zesheng; Meng, Yulin; Wang, Lianshan; Yang, Shaoyan

    2016-01-01

    We have used two models based on the valence force field and the regular solution model to study the immiscibility of InAlN ternary alloy, and have got the spinodal and binodal curves of InAlN. Analyzing the spinodal decomposition curves, we obtain the appropriate concentration region for the epitaxial growth of the InN-AlN pseudobinary alloy. At a temperature most common for the epitaxial growth of InAlN (1000 K), the solubility of InN is about 10%. Then we introduce the mismatch strain item into the Gibbs free energy, and the effect of different substrates is taken into consideration. Considering Si, Al2O3, InN, GaN, AlN as a substrate respectively, it is found that all the five systems are stabilized with the upper critical solution temperature largely reduced. Finally, InN and GaN are potential substrates for In-rich InAlN, while AlN and GaN substrates are recommended in the Al-rich region. Si and Al2O3 may be ideal substrates for thin InAlN film. PMID:27221345

  10. Atomistically informed solute drag in Al Mg

    NASA Astrophysics Data System (ADS)

    Zhang, F.; Curtin, W. A.

    2008-07-01

    Solute drag in solute-strengthened alloys, caused by diffusion of solute atoms around moving dislocations, controls the stress at deformation rates and temperatures useful for plastic forming processes. In the technologically important Al-Mg alloys, the solute drag stresses predicted by classical theories are much larger than experiments, which is resolved in general by eliminating the singularity of the dislocation core via Peierls-Nabarro-type models. Here, the drag stress versus dislocation velocity is computed numerically using a realistic dislocation core structure obtained from an atomistic model to investigate the role of the core and obtain quantitative stresses for comparison with experiment. The model solves a discrete diffusion equation in a reference frame moving with the dislocation, with input solute enthalpies and diffusion activation barriers in the core computed by or estimated from atomistic studies. At low dislocation velocities, the solute drag stress is controlled by bulk solute diffusion because the core diffusion occurs too quickly. In this regime, the drag stress can be obtained using a Peierls-Nabarro model with a core spreading parameter tuned to best match the atomistic models. At intermediate velocities, both bulk and core diffusion can contribute to the drag, leading to a complex stress-velocity relationship showing two peaks in stress. At high velocities, the drag stress is controlled solely by diffusion within and across the core. Like the continuum models, the drag stress is nearly linear in solute concentration. The Orowan relationship is used to connect dislocation velocity to deformation strain rate. Accounting for the dependence of mobile dislocation density on stress, the simulations are in good agreement with experiments on Al-Mg alloys over a range of concentrations and temperatures.

  11. Land abandonment, fire recurrence and soil carbon content in the Macizo del Caroig, Eastern Spain

    NASA Astrophysics Data System (ADS)

    Cerdá, A.; González Peñaloza, F.; Santín, C.; Doerr, S. H.

    2012-04-01

    During the last 50 years two main forces have driven the fate of Mediterranean landscapes: land abandonment and forest fires (MacDonald et al., 2000; Moreira et al., 2001). Due to the economical changes suffered by the of the Mediterranean countries after the Second World War, the population migrated from the rural to the urban areas, and from South to North Europe. The land abandonment allowed the vegetation to recover and, as a consequence, an increase in forest fire took place. The soils of the abandoned land recovered the vegetation and litter layers, and consequently changes in soil properties have being found. One of these changes is the increase of soil carbon content, which is due both to vegetation recovery and to fire occurrence that increases the ash and pyrogenic carbon content in soils. Twenty plots were selected in the Macizo del Caroig in Eastern Spain on soils developed on limestone. The period of abandonment and the forest fires that had affected each plot were determined by interviews with the owners, farmers and shepherds. In addition, six (three + three) plots were selected as forest (no plough) and cultivated control plots. Each plot was sampled (10 random samples) and the organic carbon content determined. The results show that the cultivated plots have organic matter contents of 1.02 %, and the forest (Quercus ilex sp.) plots reach the highest value: 14.98 %. Within those we found values that range from 2.34 %, in the recently abandoned plots (10 year abandonment), to values of 8.23 % in the 50 year old abandoned fields.The results demonstrate that there is a recovery of the organic carbon in abandoned soils and that the forest fires do no affect this trend. The increase of soil organic matter after abandonment is a result of the recovery of vegetation(Debussche et al., 2001), which is the consequence of the end of the disturbance of forest that have affected the Mediterranean for millennia (Barbero et al., 1990). The colonization of the

  12. 1200 to 1400 K slow strain rate compressive behavior of small grain size NiAl/Ni2AlTi alloys and NiAl/Ni2AlTi-TiB2 composites

    NASA Technical Reports Server (NTRS)

    Whittenberger, J. Daniel; Viswanadham, R. K.; Mannan, S. K.; Kumar, K. S.

    1989-01-01

    In order to impart ductility into NiAl-Ni2AlTi alloys, small grain size single (Ni-45Al-5Ti) and two (Ni-40Al-10Ti) phase intermetallics are fabricated by a process which yields fine microstructures in NiAl. The results of a study of elevated temperature compressive properties of two small grain size NiAl-Ni2AlTi alloys are then described. In addition, the behavior of the Ti-modified nickel aluminides with 20 vol pct TiB2 particles of approximately 1 micron in diameter is also investigated, since these compositions have the potential for being the matrix material in high temperature particulate-strengthened composites.

  13. 26Al uptake and accumulation in the rat brain

    NASA Astrophysics Data System (ADS)

    Yumoto, S.; Nagai, H.; Imamura, M.; Matsuzaki, H.; Hayashi, K.; Masuda, A.; Kumazawa, H.; Ohashi, H.; Kobayashi, K.

    1997-03-01

    To investigate the cause of Alzheimer's disease (senile dementia), 26Al incorporation in the rat brain was studied by accelerator mass spectrometry (AMS). When 26Al was injected into healthy rats, a considerable amount of 26Al entered the brain (cerebrum) through the blood-brain barrier 5 days after a single injection, and the brain 26Al level remained almost constant from 5 to 270 days. On the other hand, the level of 26Al in the blood decreased remarkably 75 days after injection. Approximately 89% of the 26Al taken in by the brain cell nuclei bound to chromatin. This study supports the theory that Alzheimer's disease is caused by irreversible accumulation of aluminium (Al) in the brain, and brain cell nuclei.

  14. Overview of the development of FeAl intermetallic alloys

    SciTech Connect

    Maziasz, P.J.; Liu, C.T.; Goodwin, G.M.

    1995-09-01

    B2-phase FeAl ordered intermetallic alloys based on an Fe-36 at.% Al composition are being developed to optimize a combination of properties that includes high-temperature strength, room-temperature ductility, and weldability. Microalloying with boron and proper processing are very important for FeAl properties optimization. These alloys also have the good to outstanding resistance to oxidation, sulfidation, and corrosion in molten salts or chlorides at elevated temperatures, characteristic of FeAl with 30--40 at.% Al. Ingot- and powder-metallurgy (IM and PM, respectively) processing both produce good properties, including strength above 400 MPa up to about 750 C. Technology development to produce FeAl components for industry testing is in progress. In parallel, weld-overlay cladding and powder coating technologies are also being developed to take immediate advantage of the high-temperature corrosion/oxidation and erosion/wear resistance of FeAl.

  15. [Strengths and future of the Revista Médica del Instituto Mexicano del Seguro Social].

    PubMed

    Fajardo-Dolci, Germán

    2014-01-01

    The journals of medicine arose as a communication tool more than 200 years ago. At the beginning, their nature was local; later, their aim was to spread medical information along the nation; and, finally, they sought to reach the world distribution. The Revista Médica del Instituto Mexicano del Seguro Social was published for the first time 52 years ago, and it has walked its way from local to international distribution. This journal has 23 000 subscribers, it is included in Medline and it reached a 0.112 SCImago Journal Rank in 2012. Its website receives around 200 000 visits monthly and 45 % are foreign visits. In the future, the peer review system is going to be strengthened, and the journal is going to offer audio, video, and applications to reinforce interactive participation between authors, readers in order to reach modernity and draw young new attention.

  16. Optical behavior and structural property of CuAlS₂ and AgAlS₂ wide-bandgap chalcopyrites.

    PubMed

    Ho, Ching-Hwa; Pan, Chia-Chi

    2014-08-01

    Single crystals of CuAlS₂ and AgAlS₂ were grown by chemical vapor transport method using ICl₃ as the transport. The as-grown CuAlS₂ crystals reveal transparent and light-green color. Most of them possess a well-defined (112) surface. The AgAlS₂ crystals essentially show transparent and white color in vacuum. As the AgAlS₂ was put into the atmosphere, the crystal surface gradually darkened and became brownish because of the surface reaction with humidity or hydrogen gas. After a long-term chemical reaction process, the AgAlS₂ will transform into a AgAlO₂ oxide with yellow color. From x-ray diffraction measurements, both CuAlS₂ and AgAlS₂ as-grown crystals show single-phase and isostructural to a chalcopyrite structure. The (112) face is more preferable for the formation of the chalcopyrite crystals. The energies of interband transitions of the CuAlS₂ and AgAlS₂ were determined accurately by thermoreflectance measurements in a wide energy range of 2-6 eV. The valence-band electronic structures of CuAlS₂ and AgAlS₂ have been detailed and characterized using polarized-thermoreflectance measurements in the temperature range between 30 and 300 K. The band-edge transitions belonging to the E(∥) and E(⊥) polarizations have been, respectively, identified. The band edge of AgAlS₂ is near 3.2 eV while that of AgAlS₂ is about 3.5 eV. On the basis of the experimental analyses, optical and sensing behaviors of the chalcopyrite crystals have been realized.

  17. Tropical soils cultivated with tomato: fractionation and speciation of Al.

    PubMed

    Nogueirol, Roberta Corrêa; Monteiro, Francisco Antonio; Azevedo, Ricardo Antunes

    2015-04-01

    Soil acidity and the associated problems of aluminum (Al) toxicity and scarce exchangeable bases are typically the most important limiting factors of agricultural yield in wet tropical regions. The goals of this study were to test how soil lime rates affect the forms and distribution of Al in the soil fractions and how different levels of bioavailable Al affect two tomato genotypes grown in wet tropical soils. The tomato genotypes CNPH 0082 and Calabash Rouge were grown in two wet tropical soils in a greenhouse. Soil lime rates of 0, 560, and 2240 mg kg(-1) soil (clay soil) and 0, 280, and 1120 mg kg(-1) soil (sandy soil) were applied to modify Al concentrations. Dry mass production and Al concentrations were determined in shoots and roots. Al was fractionated in the soil, and the soil solution was speciated after cultivation. The Calabash Rouge genotype possesses mechanisms to tolerate Al3+, absorbed less Al, exhibited smaller reduction in growth, and lower Al concentrations in plant parts than the CNPH 0082. Increased soil pH reduced the exchangeable Al fraction and increased the fraction mainly linked to organic matter. Al in the soil in the form of complexes with organic compounds and Al(SO4)+ (at the highest lime rate) did not affect plant development. Soil acidity can be easily neutralized by liming the soil, which transforms toxic Al3+ in the soil into forms that do not harm tomato plants, thereby avoiding oxidative stress in the plants. Al-induced stress in tomatoes varies with genotypes and soil type.

  18. Tropical soils cultivated with tomato: fractionation and speciation of Al.

    PubMed

    Nogueirol, Roberta Corrêa; Monteiro, Francisco Antonio; Azevedo, Ricardo Antunes

    2015-04-01

    Soil acidity and the associated problems of aluminum (Al) toxicity and scarce exchangeable bases are typically the most important limiting factors of agricultural yield in wet tropical regions. The goals of this study were to test how soil lime rates affect the forms and distribution of Al in the soil fractions and how different levels of bioavailable Al affect two tomato genotypes grown in wet tropical soils. The tomato genotypes CNPH 0082 and Calabash Rouge were grown in two wet tropical soils in a greenhouse. Soil lime rates of 0, 560, and 2240 mg kg(-1) soil (clay soil) and 0, 280, and 1120 mg kg(-1) soil (sandy soil) were applied to modify Al concentrations. Dry mass production and Al concentrations were determined in shoots and roots. Al was fractionated in the soil, and the soil solution was speciated after cultivation. The Calabash Rouge genotype possesses mechanisms to tolerate Al3+, absorbed less Al, exhibited smaller reduction in growth, and lower Al concentrations in plant parts than the CNPH 0082. Increased soil pH reduced the exchangeable Al fraction and increased the fraction mainly linked to organic matter. Al in the soil in the form of complexes with organic compounds and Al(SO4)+ (at the highest lime rate) did not affect plant development. Soil acidity can be easily neutralized by liming the soil, which transforms toxic Al3+ in the soil into forms that do not harm tomato plants, thereby avoiding oxidative stress in the plants. Al-induced stress in tomatoes varies with genotypes and soil type. PMID:25740686

  19. Illuminating water and life: Emilio Del Giudice.

    PubMed

    Ho, Mae-Wan

    2015-01-01

    The quantum electrodynamics theory of water put forward by Del Giudice and colleagues provides a useful foundation for a new science of water for life. The interaction of light with liquid water generates quantum coherent domains in which the water molecules oscillate between the ground state and an excited state close to the ionizing potential of water. This produces a plasma of almost free electrons favoring redox reactions, the basis of energy metabolism in living organisms. Coherent domains stabilized by surfaces, such as membranes and macromolecules, provide the excited interfacial water that enables photosynthesis to take place, on which most of life on Earth depends. Excited water is the source of superconducting protons for rapid intercommunication within the body. Coherent domains can also trap electromagnetic frequencies from the environment to orchestrate and activate specific biochemical reactions through resonance, a mechanism for the most precise regulation of gene function.

  20. Illuminating water and life: Emilio Del Giudice.

    PubMed

    Ho, Mae-Wan

    2015-01-01

    The quantum electrodynamics theory of water put forward by Del Giudice and colleagues provides a useful foundation for a new science of water for life. The interaction of light with liquid water generates quantum coherent domains in which the water molecules oscillate between the ground state and an excited state close to the ionizing potential of water. This produces a plasma of almost free electrons favoring redox reactions, the basis of energy metabolism in living organisms. Coherent domains stabilized by surfaces, such as membranes and macromolecules, provide the excited interfacial water that enables photosynthesis to take place, on which most of life on Earth depends. Excited water is the source of superconducting protons for rapid intercommunication within the body. Coherent domains can also trap electromagnetic frequencies from the environment to orchestrate and activate specific biochemical reactions through resonance, a mechanism for the most precise regulation of gene function. PMID:26098522

  1. Molecular beam epitaxy growth of Al-rich AlGaN nanowires for deep ultraviolet optoelectronics

    NASA Astrophysics Data System (ADS)

    Zhao, S.; Woo, S. Y.; Sadaf, S. M.; Wu, Y.; Pofelski, A.; Laleyan, D. A.; Rashid, R. T.; Wang, Y.; Botton, G. A.; Mi, Z.

    2016-08-01

    Self-organized AlGaN nanowires by molecular beam epitaxy have attracted significant attention for deep ultraviolet optoelectronics. However, due to the strong compositional modulations under conventional nitrogen rich growth conditions, emission wavelengths less than 250 nm have remained inaccessible. Here we show that Al-rich AlGaN nanowires with much improved compositional uniformity can be achieved in a new growth paradigm, wherein a precise control on the optical bandgap of ternary AlGaN nanowires can be achieved by varying the substrate temperature. AlGaN nanowire LEDs, with emission wavelengths spanning from 236 to 280 nm, are also demonstrated.

  2. Influence of Content of Al2O3 on Structure and Properties of Nanocomposite Nb-B-Al-O films.

    PubMed

    Liu, Na; Dong, Lei; Dong, Lei; Yu, Jiangang; Pan, Yupeng; Wan, Rongxin; Gu, Hanqing; Li, Dejun

    2015-12-01

    Nb-B-Al-O nanocomposite films with different power of Al2O3 were successfully deposited on the Si substrate via multi-target magnetron co-sputtering method. The influences of Al2O3's content on structure and properties of obtained nanocomposite films through controlling Al2O3's power were investigated. Increasing the power of Al2O3 can influence the bombarding energy and cause the momentum transfer of NbB2. This can lead to the decreasing content of Al2O3. Furthermore, the whole films showed monocrystalline NbB2's (100) phase, and Al2O3 shaded from amorphous to weak cubic-crystalline when decreasing content of Al2O3. This structure and content changes were proof by X-ray diffraction (XRD) and high-resolution transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). When NbB2 grains were far from each other in lower power of Al2O3, the whole films showed a typical nanocomposite microstructure with crystalline NbB2 grains embedded in a matrix of an amorphous Al2O3 phase. Continuing increasing the power of Al2O3, the less content of Al2O3 tended to cause crystalline of cubic-Al2O3 between the close distances of different crystalline NbB2 grains. The appearance of cubic-crystallization Al2O3 can help to raise the nanocomposite films' mechanical properties to some extent. The maximum hardness and elastic modulus were up to 21.60 and 332.78 GPa, which were higher than the NbB2 and amorphous Al2O3 monolithic films. Furthermore, this structure change made the chemistry bond of O atom change from the existence of O-Nb, O-B, and O-Al bonds to single O-Al bond and increased the specific value of Al and O. It also influenced the hardness in higher temperature, which made the hardness variation of different Al2O3 content reduced. These results revealed that it can enhance the films' oxidation resistance properties and keep the mechanical properties at high temperature. The study highlighted the importance of controlling the Al2O3's content to prepare

  3. Cobertura de los sistemas de pensiones y factores asociados al acceso a una pensión de jubilación en México

    PubMed Central

    Murillo-López, Sandra; Venegas-Martínez, Francisco

    2016-01-01

    Resumen Objetivos: obtener estimaciones de indicadores de cobertura de las pensiones por jubilación o retiro para la población mexicana de 65 y más años, y evaluar el impacto que tienen los sistemas de pensiones en las transiciones al retiro de los adultos en edades medias y avanzadas en México. Para ello se utilizan datos microeconómicos provenientes de la Encuesta Nacional de Salud y Envejecimiento. Mediante análisis econométrico se identifican los factores sociodemográficos, económicos, laborales e institucionales que están asociados al acceso a una pensión de jubilación, o bien, a la dependencia de otras fuentes de ingresos. Se encontró que, en México, las transiciones al retiro del mercado de trabajo en las etapas avanzadas del ciclo de vida son limitadas debido a las características eminentemente contributivas de los esquemas de pensiones, los cuales favorecen a la población con trayectorias laborales formales y más estables asociadas a: características de género, oportunidades educativas y posibilidades de inserción en el mercado laboral. PMID:27524936

  4. Características del viento en estrellas Be derivadas del perfil Hα

    NASA Astrophysics Data System (ADS)

    Rohrmann, R.; Cidale, L.

    El estudio teórico de perfiles Hα y su variabilidad en estrellas Be ha sido frecuentemente desarrollado en base a modelos de envolturas circunestelares inhomogéneas, donde la geometría del material es responsable de la forma del perfil dependiendo de la dirección de observación. Nosotros damos una interpretación alternativa y proponemos que la mayoría de las propiedades de esta línea tienen origen en la base de un viento estelar y de una estructura cromosférica anexa a la fotósfera. Encontramos que típicos perfiles Hα en Be, como son los llamados pole-on y winebottle, pueden ser reproducidos cualitativamente sin recurrir a la existencia de una envoltura asimétrica. Analizamos como la línea Hα permite identificar la posible estructura del viento en la región donde éste se inicia.

  5. Estudio teórico del CO2. Orbitales de valencia y del ``core''

    NASA Astrophysics Data System (ADS)

    Olalla Gutiérrez, E.

    Hemos calculado las intensidades de las transiciones E1 a los miembros de las series de Rydberg con origen en los orbitales ``no enlazantes'' del dióxido de carbono, especie de conocida relevancia atmosférica. Se han computado, asimismo, los continuos de fotoionización correspondientes a los distintos canales de ionización, representándolos como densidad espectral de fuerza de oscilador frente a la energía del fotón incidente; mostramos los resultados df/dE para la fotoionización total de esta especie en el intervalo 15-60 eV. Todos los cálculos se han llevado a cabo mediante la formulación Molecular del Método de los Orbitales de Defecto Cuántico, MQDO [1,2]. La calidad de los resultados que presentamos se ha evaluado en base a la comparación con los datos, tanto experimentales como teóricos, disponibles en la bibliografía. El acuerdo encontrado es altamente satisfactorio

  6. A photoelectron spectroscopy and thermal desorption study of CO on FeAl(110) and polycrystalline TiAl and NiAl

    NASA Astrophysics Data System (ADS)

    Gleason, N. R.; Strongin, D. R.

    1993-10-01

    Research presented in this paper investigates the electronic properties and surface reactivity of FeAl(110) and polycrystalline TiAl and NiAl toward carbon monoxide. X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS) have been used to characterize the electronic structure of the clean and CO-exposed surfaces. Temperature programmed desorption (TPD) shows CO desorption states below 470 K on all the aluminide surfaces. UPS shows that CO adsorption is molecular on FeAl(110) and NiAl at 130 and 200 K, respectively. The majority of CO is found to be dissociated on TiAl at 200 K. Adsorption of CO on FeAl(110) at 315 K results in both molecular and dissociated species, as determined by XPS. Heating this CO/FeAl(110) system results in further dissociation and CO desorption near 430 K. XPS data suggests that surface oxygen, resulting from CO dissociation, preferentially binds to the aluminum component.

  7. Measured Activities of Al and Ni in gamma-(Ni) and gamma'-(Ni)3Al in the Ni-Al-Pt System

    NASA Technical Reports Server (NTRS)

    Copland, Evan

    2007-01-01

    Adding Pt to Ni-Al coatings is critical to achieving the required oxidation protection of Ni-based superalloys, but the nature of the Pt effect remains unresolved. This research provides a fundamental part of the answer by measuring the influence of Pt on the activities of Al and Ni in gamma-(Ni), gamma prime-(Ni)3Al and liquid in the Ni-Al-Pt system. Measurements have been made at 25 compositions in the Ni-rich corner over the temperature range, T = 1400-1750 K, by the vapor pressure technique with a multiple effusion-cell mass spectrometer (multi-cell KEMS). These measurements clearly show adding Pt (for X(sub Pt) less than 0.25) decreases a(Al) while increasing a(Ni). This solution behavior supports the idea that Pt increases Al transport to an alloy / Al2O3 interface and also limits the interaction between the coating and substrate alloys in the gamma-(Ni) + gamma prime-(Ni)3Al region. This presentation will review the progress of this study.

  8. [Modello di Management (Mo.Ma) del paziente affetto da schizofrenia: controllo della crisi, mantenimento, prevenzione delle ricadute e recovery con gli antipsicotici LAI].

    PubMed

    Brugnoli, Roberto; Rapinesi, Chiara; Kotzalidis, Georgios D; Marcellusi, Andrea; Mennini, Francesco S; De Filippis, Sergio; Carrus, Dario; Ballerini, Andrea; Francomano, Antonio; Ducci, Giuseppe; Del Casale, Antonio; Girardi, Paolo

    2016-01-01

    RIASSUNTO. La schizofrenia colpisce circa l'1% della popolazione e rappresenta un grave disturbo mentale con un notevole impatto anche sul funzionamento sociale, lavorativo e sulle attività della vita quotidiana. Le persone con schizofrenia hanno un tasso di mortalità superiore di 2-2,5 rispetto a quello della popolazione generale. La non aderenza ai farmaci antipsicotici è uno dei più importanti fattori di rischio per le ricadute e le ospedalizzazioni, sia nei pazienti con disturbo cronico sia al primo episodio, e conseguentemente contribuisce all'aumento dei costi sanitari. Gli antipsicotici atipici LAI possono migliorare l'aderenza al trattamento contribuendo a diminuire i tassi di ricaduta nei pazienti affetti da schizofrenia fin dall'esordio. Gli obiettivi primari nella gestione dei pazienti schizofrenici sono diretti, non solo alla riduzione dei sintomi nel breve termine, ma anche al mantenimento fisico e della funzionalità mentale, migliorando la qualità della vita e promuovendo il recupero del paziente. Scopo. Proporre un modello integrato, basato sulle evidenze, che fornisca un algoritmo efficace per il recupero del paziente schizofrenico e indagare l'efficacia e la sicurezza degli antipsicotici LAI nel trattamento, nel mantenimento, nella prevenzione delle ricadute e nella recovery dei pazienti affetti da schizofrenia. Metodi. Dopo un'accurata analisi di letteratura abbiamo identificato, raccolto e analizzato gli elementi qualificanti per un'ottimale gestione del paziente schizofrenico, definendo un modello di gestione e selezione delle alternative terapeutiche. Conclusioni. Il modello di gestione della schizofrenia proposto potrebbe consentire un migliore recupero funzionale del paziente grazie alla scelta di iniziare il percorso terapeutico, fin dalle prime fasi del disturbo soprattutto se in giovane età e al primo episodio, con un farmaco atipico LAI. All'interno dei farmaci antipsicotici atipici la formulazione LAI rappresenta una scelta

  9. Descripción del coronógrafo a ser instalado en Argentina (MICA)

    NASA Astrophysics Data System (ADS)

    Stenborg, G.; Francile, C.; Schwenn, R.; Epple, A.; Rovira, M.

    El ``Coronógrafo de espejo para Argentina'' es un telescopio solar terrestre a ser colocado en el Observatorio Astronómico Félix Aguilar (El Leoncito), antes de finalizar 1996, como parte de un programa de ciencia bilateral entre Alemania y Argentina. Eclipses fotográficos de alta resolución han revelado que la corona solar es altamente estructurada y variable. De hecho, está contínuamente deformada y moldeada por los movimientos convectivos de los extremos de los arcos magnéticos en la fotosfera, estando, en muchas oportunidades, afectada por explosivas liberaciones de energía. MICA, en conjunción con otros telescopios solares espaciales y terrestres, tratará de contribuir al entendimiento de cuestiones fundamentales de la física solar. Entre ellas: cómo la corona está siendo calentada, dónde y cómo el viento solar es acelerado, qué causa los transitorios coronales, etc. Para ello investigará la distribución de los parámetros del plasma y su evolución con el tiempo, la estructura espacial de la corona en fina y gran escala, procesos que ocurren en los transitorios coronales y factores que los disparan, etc. Para responder a estas cuestiones MICA observará la atmósfera solar por sobre el limbo entre 1.1 y 2 radios solares aproximadamente, usando un nuevo tipo de sistema coronográfico que permite suprimir el brillo del disco solar suficientemente bien, tomando las imágenes con una cámara CCD de 1024x1024 pixels, codificada en 12 bits, pudiendo el mismo ser operado en forma remota. En la presente exposición describiremos las características del instrumento, cómo será controlado y qué esperamos observar basados en las imágenes obtenidas por los telescopios de similares características LASCO C1 a bordo del SOHO y PICO (ubicado en el Observatorio de Pic du Midi, Francia).

  10. [La Medicina del Lavoro: 100 volumes].

    PubMed

    Zocchetti, C

    2009-01-01

    With these pages La Medicina del Lavoro starts its 100th volume, so we have yet another historical occasion to celebrate the oldest occupational health journal in the world that is still publishing. Over the last few years we have had many occasions to celebrate, for example several anniversaries of the Journal (the 80th volume in 1989, 90 years in 1992, 100 years in 2001); the centenary of the foundation of the Clinica del Lavoro "Luigi Devoto" of Milan in 2001; the celebration of the 300 years' anniversary of the publication of De Morbis Artificum Diatriba by Bernardino Ramazzini, and we obviously hope to continue for many years to come in this positive outlook. One hundred volumes makes for a very large collection, with the highs and lows ofthe Journal's history (here we mean the variations in number of pages and physical size of the Journal). It is thanks to the Editors-in-chief(there have been very few so we can cite them all: Luigi Devoto, 1901-1936; Luigi Preti, 1936-1941; Enrico Vigliani, 1943-1992; e Vito Foà, 1992 to the present); the contributors who in various ways and with varying degrees of commitment but always with an exceptional personal participation, that it has been possible to reach 100 volumes, starting with C. Moreschi who, along with Luigi Devoto, was the first and sole editor at the Journal's foundation; up to the present extended and impressive editorial board; the printers (from the first. Tipografia Cooperativa, Via dei Molini in Pavia, to the latest: Casa Editrice Mattioli in Fidenza); the sponsors, including the most evident who, via advertising (rather limited as a matter offact), directly gave information about themselves, but also those who have often been or are behind the scenes, ensuring fundamental support which is not visible; content. articles, news, events, reports, ideas, opinions, photographs, tables, numbers... etc, which are really impossible to sum up. But the true collection which, for obvious reasons, cannot be

  11. High electron mobility AlGaN/AlN/GaN HEMT structure with a nano-scale AlN interlayer

    NASA Astrophysics Data System (ADS)

    Huang, Shih-Chun; Chen, Wen-Ray; Hsu, Yu-Ting; Lin, Jia-Ching; Chang, Kuo-Jen; Lin, Wen-Jen

    2012-10-01

    Epitaxies of AlGaN/AlN/GaN high electron mobility transistor (HEMT) structures with different thickness of nano-scale AlN interlayers have been realized by metalorganic chemical vapor deposition (MOCVD) technology. After epitaxy, high resolution X-ray diffraction (HRXRD), temperature-dependent Hall Effect and atomic force microscopy (AFM) measurements were used to characterize the properties of these samples. First, it was found that the Al composition of AlGaN layer increases from 21.6 to 34.2% with increasing the thickness of AlN interlayer from 0 to 5 nm under the same AlGaN growth conditions. This result may due to the influences of compressive stress and Al incorporation induced by the AlN interlayer. Then, we also found that the room-temperature (RT) electron mobility stays higher than 1500 cm2/Vs in the samples within AlN interlayer thickness range of 1.5 nm, on the other hand, the low-temperature (80K) electron mobility drops dramatically from 8180 to 5720 cm2/Vs in the samples with AlN interlayer thickness increasing from 1 to 1.5 nm. Furthermore, it was found that the two-dimensional electron gas (2DEG) density increases from 1.15×1013 to 1.58×1013 cm-2 beyond the AlN interlayer thickness of 1 nm. It was also found that the temperature independent 2DEG densities are observed in the samples with AlN interlayer thickness of 0.5 and 1 nm. The degenerated characteristics of the samples with AlN thickness thicker than 1.5 nm show the degraded crystalline quality which matched the observation of surface defects and small cracks formations from their AFM images. Finally, the 2DEG mobilities of the proposed structures can be achieved as high as 1705 and 8180 cm2/Vs at RT and 80K, respectively.

  12. Molecular and phenotypic characterization of Als1 and Als2 mutations conferring tolerance to acetolactate synthase herbicides in soybean

    PubMed Central

    Walter, Kay L; Strachan, Stephen D; Ferry, Nancy M; Albert, Henrik H; Castle, Linda A; Sebastian, Scott A

    2014-01-01

    BACKGROUND Sulfonylurea (SU) herbicides are effective because they inhibit acetolactate synthase (ALS), a key enzyme in branched-chain amino acid synthesis required for plant growth. A soybean line known as W4-4 was developed through rounds of seed mutagenesis and was demonstrated to have a high degree of ALS-based resistance to both post-emergence and pre-emergence applications of a variety of SU herbicides. This report describes the molecular and phenotypic characterization of the Als1 and Als2 mutations that confer herbicide resistance to SUs and other ALS inhibitors. RESULTS The mutations are shown to occur in two different ALS genes that reside on different chromosomes: Als1 (P178S) on chromosome 4 and Als2 (W560L) on chromosome 6 (P197S and W574L in Arabidopsis thaliana). CONCLUSION Although the Als1 and Als2 genes are unlinked, the combination of these two mutations is synergistic for improved tolerance of soybeans to ALS-inhibiting herbicides. © 2014 DuPont Pioneer. Pest Management Science published by JohnWiley & Sons Ltd on behalf of Society of Chemical Industry. PMID:24425499

  13. Al-Cu-Li and Al-Mg-Li alloys: Phase composition, texture, and anisotropy of mechanical properties (Review)

    NASA Astrophysics Data System (ADS)

    Betsofen, S. Ya.; Antipov, V. V.; Knyazev, M. I.

    2016-04-01

    The results of studying the phase transformations, the texture formation, and the anisotropy of the mechanical properties in Al-Cu-Li and Al-Mg-Li alloys are generalized. A technique and equations are developed to calculate the amounts of the S1 (Al2MgLi), T1 (Al2CuLi), and δ' (Al3Li) phases. The fraction of the δ' phase in Al-Cu-Li alloys is shown to be significantly higher than in Al-Mg-Li alloys. Therefore, the role of the T1 phase in the hardening of Al-Cu-Li alloys is thought to be overestimated, especially in alloys with more than 1.5% Li. A new model is proposed to describe the hardening of Al-Cu-Li alloys upon aging, and the results obtained with this model agree well with the experimental data. A texture, which is analogous to that in aluminum alloys, is shown to form in sheets semiproducts made of Al-Cu-Li and Al-Mg-Li alloys. The more pronounced anisotropy of the properties of lithium-containing aluminum alloys is caused by a significant fraction of the ordered coherent δ' phase, the deformation mechanism in which differs radically from that in the solid solution.

  14. Al Incorporation at All Growth Stages of Al x Ga1- x N Epilayers Using SiN Treatment

    NASA Astrophysics Data System (ADS)

    Benzarti, Z.; Halidou, I.; Touré, A.; El Jani, B.

    2016-02-01

    Al compositional distribution of Al x Ga1- x N epilayers grown on SiN-treated sapphire substrate by atmospheric pressure metalorganic vapor phase epitaxy is investigated. The growth process was interrupted at various stages allowing a systematic study of Al x Ga1- x N epilayers during the smoothing process. A transition from three-dimensional (3D) to two-dimensional (2D) growth mode is revealed by in situ laser reflectometry (λ = 632.8 nm) as well as by atomic force microscopic images. Then, ion mass spectrometry analysis was performed to obtain the solid Al composition ( x) profile as well as by photoluminescence measurements. Moreover, the in situ reflectivity signal is simulated; thereby Al x Ga1- x N growth rate is derived and compared with that of GaN layer in order to study the effect of the aluminum incorporation on the growth mechanism. It is worth emphasising that the growth mode of Al x Ga1- x N layers is dictated by SiN treatment, which influences the Al compositional distribution. Electron mobility and refractive index against the thickness of Al x Ga1- x N layers have similar trends, which confirm a competitive mechanism between growth mode and Al incorporation. Therefore, the correlation between the Al composition and morphological, optical, and electrical properties of Al x Ga1- x N layers is established.

  15. CLEC4C p.K210del variant causes impaired cell surface transport in plasmacytoid dendritic cells of amyotrophic lateral sclerosis

    PubMed Central

    Choi, Won Jun; Oh, Ki-Wook; Noh, Min-Young; Kwon, Min-Soo; Nahm, Minyeop; Kim, Namshin

    2016-01-01

    The type II C-type lectin CLEC4C is a transmembrane protein selectively expressed on plasmacytoid dendritic cells (PDCs). Although its mechanism of action remains unclear, triggering of the extracellular C-terminal C-type carbohydrate recognition region of CLEC4C regulates the secretion of proinflammatory cytokines and type I IFNs in PDCs. Applying whole-exome sequencing in a patient with juvenile amyotrophic lateral sclerosis (ALS) and both healthy parents, we identified a de novo CLEC4C variant (c.629_631delAGA; p.Lys210del). In this study, we report that the deletion of a lysine residue at the extracellular region of CLEC4C yields a C-terminal dilysine motif that results in endoplasmic reticulum (ER) retention of the protein in transfected HeLa and Jurkat T lymphoma cell models. As a consequence, a decrease in the surface expression of CLEC4C and the ER localization of the mutant construct were observed. Furthermore, depletion of the cell surface CLEC4C level was also observed in the patient PDCs, further suggesting that the variant p.Lys210del CLEC4C may contribute to juvenile ALS susceptibility. PMID:26943047

  16. Investigation of amber light-emitting diodes based on InGaN/AlN/AlGaN quantum wells

    NASA Astrophysics Data System (ADS)

    Iida, Daisuke; Lu, Shen; Hirahara, Sota; Niwa, Kazumasa; Kamiyama, Satoshi; Ohkawa, Kazuhiro

    2016-05-01

    We investigated InGaN-based amber light-emitting diodes (LEDs) with AlN/(Al)GaN barrier layers grown by metalorganic vapor-phase epitaxy. Tensilely strained AlN/Al0.03Ga0.97N barriers improved the crystalline quality of compressively strained InGaN quantum wells. We found that strain compensation among wells and barriers improves the external quantum efficiency of high-In-content InGaN-based amber LEDs. The amber LEDs with AlN/Al0.03Ga0.97N barriers have shown an electroluminescence (EL) intensity approximately 2.5-fold that of LEDs with the AlN/GaN barriers at 20 mA.

  17. Current transport mechanism in graphene/AlGaN/GaN heterostructures with various Al mole fractions

    NASA Astrophysics Data System (ADS)

    Pandit, Bhishma; Seo, Tae Hoon; Ryu, Beo Deul; Cho, Jaehee

    2016-06-01

    The current transport mechanism of graphene formed on AlxGa1-xN/GaN heterostructures with various Al mole fractions (x = 0.15, 0.20, 0.30, and 0.40) is investigated. The current-voltage measurement from graphene to AlGaN/GaN shows an excellent rectifying property. The extracted Schottky barrier height of the graphene/AlGaN/GaN contacts increases with the Al mole fraction in AlGaN. However, the current transport mechanism deviates from the Schottky-Mott theory owing to the deterioration of AlGaN crystal quality at high Al mole fractions confirmed by reverse leakage current measurement.

  18. Positron lifetime studies of decomposition in 2024 (Al-Cu-Mg) and 7010 (Al-Zn-Cu-Mg) alloys

    SciTech Connect

    Dlubek, G. |; Lademann, P.; Krause, H.; Krause, S.; Unger, R.

    1998-09-04

    In the current paper, the decomposition behavior of the engineering alloys 2024 (Al-Cu-Mg) and 7010 (Al-Zn-Cu-Mg) is studied using positron lifetime measurements. Positrons probe open volume defects such as vacancies and dislocations. However, they may also be used to investigate coherent zones and incoherent precipitates. In order to understand the rather complicated precipitation sequences and the response of positrons to different type of precipitates occurring in 2024 and 7010 alloys, binary and ternary laboratory alloys were also investigated under the same experimental conditions as the engineering alloys. The interpretations of the results are based on experiences of the group from extensive positron studies of laboratory alloys such as Al-Zn, Al-Zn-Mg, Al-Cu, and further Al alloys (see also the review (4)). Their collected results are shown as lifetimes and curve-shape parameters S of the electron-positron momentum distribution curves characteristic for different precipitates in Al alloys.

  19. Dependence of electrostatic potential distribution of Al2O3/Ge structure on Al2O3 thickness

    NASA Astrophysics Data System (ADS)

    Wang, Xiaolei; Xiang, Jinjuan; Wang, Wenwu; Zhao, Chao; Zhang, Jing

    2016-09-01

    Electrostatic potential distribution of Al2O3/Ge structure is investigated vs. Al2O3 thickness by X-ray photoelectron spectroscopy (XPS). The electrostatic potential distribution is found to be Al2O3 thickness dependent. This interesting phenomenon is attributed to the appearance of gap states on Al2O3 surface (GSAl2O3) and its higher charge neutrality level (CNL) compared with the CNL of gap states at Al2O3/Ge interface (GSAl2O3/Ge), leading to electron transfer from GSAl2O3 to GSAl2O3/Ge. In the case of thicker Al2O3, fewer electrons transfer from GSAl2O3 to GSAl2O3/Ge, resulting in a larger potential drop across Al2O3 and XPS results.

  20. Fabrication of a 2014Al-SiC/2014Al Sandwich Structure Composite with Good Tensile Strength and Ductility

    NASA Astrophysics Data System (ADS)

    Zhu, Xian; Zhao, Yu-Guang; Wang, Hui-Yuan; Wang, Zhi-Guo; Wu, Min; Pei, Chang-hao; Chen, Chao; Jiang, Qi-Chuan

    2016-09-01

    A sandwich structure laminate composed of a ductile 2014Al inter-layer and two nanoscale SiC reinforced 2014Al (SiC/2014Al) composite outer layers was successfully fabricated through the combination of powder metallurgy and hot rolling. The ductile 2014Al inter-layer effectively improved the processability of the sandwiched laminates. Tensile test revealed that the yield strength and ultimate tensile strength of the sandwiched laminate were 287 and 470 MPa, respectively, compared with 235 and 425 MPa for monolithic 2014Al. The good performance of the sandwiched laminate results from the strong bonding between the SiC/2014Al composites layer and the ductile 2014Al layer. Thus, the sandwich structure with a composite surface and ductile core is effective for increasing the strength and toughness of composite laminates.

  1. Resistive Switching in Al/Al2O3/TiO2/Al/PES Flexible Device for Nonvolatile Memory Application.

    PubMed

    Lin, Chun-Chieh; Lee, Wang-Ying; Lee, Han-Tang

    2016-05-01

    Resistive switching memory devices with superior properties are possibly used in next-generation nonvolatile memory to replace the flash memory. In addition, flexible electronics has also attracted much attention because of its light-weight and flexibility. Therefore, an Al/Al2O3/TiO2/Al/PES flexible resistive switching memory is employed in this study. The resistive switching characteristics and stability of the flexible device are improved by inserting the Al2O3 film. The resistive switching of the flexible device can be repeated over hundreds of times after the bending test. A possible resistive switching model of the flexible device is also proposed. In addition, the non-volatility of the flexible device is demonstrated. Based on our research results, the proposed Al2O3/TiO2-based resistive switching memory is possibly used in next-generation flexible electronics and nonvolatile memory applications. PMID:27483828

  2. The atomic details of the interfacial interaction between the bottom electrode of Al/AlO{sub x}/Al Josephson junctions and HF-treated Si substrates

    SciTech Connect

    Zeng, L. J.; Nik, S.; Olsson, E.; Krantz, P.; Delsing, P.

    2015-04-28

    The interface between the Al bottom contact layer and Si substrates in Al based Josephson junctions is believed to have a significant effect on the noise observed in Al based superconducting devices. We have studied the atomic structure of it by transmission electron microscopy. An amorphous layer with a thickness of ∼5 nm was found between the bottom Al electrode and HF-treated Si substrate. It results from intermixing between Al, Si, and O. We also studied the chemical bonding states among the different species using energy loss near edge structure. The observations are of importance for the understanding of the origin of decoherence mechanisms in qubits based on these junctions.

  3. Modelo analítico del efecto de PRS sobre satélites GPS

    NASA Astrophysics Data System (ADS)

    Meza, A.; Brunini, C.; Usandivaras, J. C.

    El sistema GPS (Global Position System) es, hoy en día, la herramienta de navegación y posicionamiento más potente y lo será sin duda en la próxima década. Gran parte de su valiosa utilidad se debe a la alta precisión que permite lograr y ésta, a su vez, depende, entre otras causas, de la precisión con que se conocen las órbitas de los satélites. La presión de radiación solar (PRS) fija el límite de la precisión con que pueden calcularse en la actualidad las efemérides satelitarias. El objetivo de este trabajo es proponer una mejor resolución de este fenómeno. El modelo analítico aquí presentado, se basa en el análisis del comportamiento de los residuos de un ajuste por mínimos cuadrados en el que se utiliza el modelo de PRS propuesto por Beutler. El mismo consiste en un modelo determinista del fenómeno con dos parámetros libres. Los resultados obtenidos ponen de manifiesto que, aún después de aplicar dichos parámetros, prevalecen en los residuos efectos semidiurnos en las componentes radial,tangencial y normal. Estos resultados obtenidos se comparan con los de un trabajo desarrollado por el Instituto de Berne (Beutler et al., 1994), en el que se utilizaron como pseudo-observaciones las órbitas precisas del IGS (CODE). El intervalo de integración escogido por este centro fueron las semanas 680 y 681. En resumen se tienen arcos de 14 días para todos los satélites, donde las efemérides precisas de los mismos para los 14 días fueron utilizados como pseudo-observaciones. El modelo de fuerza que empleó dicho centro fue básicamente el tradicional en lo que respecta al modelo de las fuerzas gravitacionales, y para la PRS utilizo el modelo standard de Beutler. Los parámetros de este modelo junto con las 6 condiciones iniciales (posición y velocidad) fueron ajustados por el método general de mínimos cuadrados. Los residuos en la componente radial, tangencial y normal, para los satélites con un buen comportamiento, presentan una

  4. MCrAlY bond coat with enhanced yttrium

    DOEpatents

    Jablonski, Paul D.; Hawk, Jeffrey A.

    2016-08-30

    One or more embodiments relates to a method of producing an MCrAlY bond coat comprising an MCrAlY layer in contact with a Y--Al.sub.2O.sub.3 layer. The MCrAlY layer is comprised of a .gamma.-M solid solution, a .beta.-MAl intermetallic phase, and Y-type intermetallics. The Y--Al.sub.2O.sub.3 layer is comprised of Yttrium atoms coordinated with oxygen atoms comprising the Al.sub.2O.sub.3 lattice. The method comprises depositing an MCrAlY material on a substrate, applying an Y.sub.2O.sub.3 paste, and heating the substrate in a non-oxidizing atmosphere at a temperature between 400-1300.degree. C. for a time sufficient to generate the Y--Al.sub.2O.sub.3 layer. Both the MCrAlY layer and the Y--Al.sub.2O.sub.3 layer have a substantial absence of Y.sub.2O.sub.3, YAG, and YAP phases.

  5. Intermetallic Phase Formation in Explosively Welded Al/Cu Bimetals

    NASA Astrophysics Data System (ADS)

    Amani, H.; Soltanieh, M.

    2016-08-01

    Diffusion couples of aluminum and copper were fabricated by explosive welding process. The interface evolution caused by annealing at different temperatures and time durations was investigated by means of optical microscopy, scanning electron microscopy equipped with energy dispersive spectroscopy, and x-ray diffraction. Annealing in the temperature range of 573 K to 773 K (300 °C to 500 °C) up to 408 hours showed that four types of intermetallic layers have been formed at the interface, namely Al2Cu, AlCu, Al3Cu4, and Al4Cu9. Moreover, it was observed that iron trace in aluminum caused the formation of Fe-bearing intermetallics in Al, which is near the interface of the Al-Cu intermetallic layers. Finally, the activation energies for the growth of Al2Cu, AlCu + Al3Cu4, Al4Cu9, and the total intermetallic layer were calculated to be about 83.3, 112.8, 121.6, and 109.4 kJ/mol, respectively. Considering common welding methods ( i.e., explosive welding, cold rolling, and friction welding), although there is a great difference in welding mechanism, it is found that the total activation energy is approximately the same.

  6. Pure AlN layers in metal-polar AlGaN/AlN/GaN and AlN/GaN heterostructures grown by low-temperature ammonia-based molecular beam epitaxy

    NASA Astrophysics Data System (ADS)

    Kaun, Stephen W.; Mazumder, Baishakhi; Fireman, Micha N.; Kyle, Erin C. H.; Mishra, Umesh K.; Speck, James S.

    2015-05-01

    When grown at a high temperature (820 °C) by ammonia-based molecular beam epitaxy (NH3-MBE), the AlN layers of metal-polar AlGaN/AlN/GaN heterostructures had a high GaN mole fraction (∼0.15), as identified by atom probe tomography in a previous study (Mazumder et al 2013 Appl. Phys. Lett. 102 111603). In the study presented here, growth at low temperature (<740 °C) by NH3-MBE yielded metal-polar AlN layers that were essentially pure at the alloy level. The improved purity of the AlN layers grown at low temperature was correlated to a dramatic increase in the sheet density of the two-dimensional electron gas (2DEG) at the AlN/GaN heterointerface. Through application of an In surfactant, metal-polar AlN(3.5 nm)/GaN and AlGaN/AlN(2.5 nm)/GaN heterostructures grown at low temperature yielded low 2DEG sheet resistances of 177 and 285 Ω/□, respectively.

  7. The reaction of vapor-deposited Al with Cu oxides

    SciTech Connect

    Taylor, T.N.; Martin, J.A.

    1990-01-01

    Interfaces formed by controlled deposition of Al on Cu oxides at 300K have been characterized using Auger electron spectroscopy (AES) and x-ray photoelectron spectroscopy (XPS). When Al is deposited onto a thin oxide grown on Cu(110) by atmospheric exposure, it completely scavenges the oxygen from the substrate material, increasing the O(1s) binding energy by 2.0 eV to give the value found for atmospheric oxidation of a thin Al film. Similar oxygen behavior is seen for Al deposition on sputter-deposited CuO with an enriched oxygen surface region, where multilayers of Al erase the shakeup satellites in the Cu(2p) region of the XPS spectrum to give features like those exhibited by Cu{sub 2}O or metallic Cu. Having calibrated the fluence of the Al source with Rutherford backscattering spectrometry, the attenuation of the Cu 2p{sub 1/2} satellite after approximately one monolayer of Al deposition is associated with the removal of oxygen from the top 20 {angstrom} of the CuO. Approximately 7--8 equivalent monolayers of Al are converted to an oxide in the initial rapid reaction process. Further deposition leads to progressive development of the metallic Al signature in both the XPS and AES spectra. These measurements clearly demonstrate the dominant role played by Al, a strong oxide former, when it is placed in intimate contact with the distinctively weaker Cu oxide. 9 refs., 5 figs.

  8. 394delTT: a Nordic cystic fibrosis mutation.

    PubMed

    Schwartz, M; Anvret, M; Claustres, M; Eiken, H G; Eiklid, K; Schaedel, C; Stolpe, L; Tranebjaerg, L

    1994-02-01

    In a systematic screening for mutations in the gene encoding the cystic fibrosis transmembrane regulator among Danish cystic fibrosis (CF) patients, we identified a mutation in exon 3 (394delTT); this mutation was found to be relatively common in Denmark. We therefore screened for 394delTT in Sweden and Norway, where it turned out to be the second most frequent mutation, accounting for 4% of all CF mutations. It also occurs with a high frequency in Finland, but has not been found in larger surveys of mutations in the CFTR gene. Thus, 394delTT seems to be a specific Nordic CF mutation.

  9. 26Al- 26Mg and 207Pb- 206Pb systematics of Allende CAIs: Canonical solar initial 26Al/ 27Al ratio reinstated

    NASA Astrophysics Data System (ADS)

    Jacobsen, Benjamin; Yin, Qing-zhu; Moynier, Frederic; Amelin, Yuri; Krot, Alexander N.; Nagashima, Kazuhide; Hutcheon, Ian D.; Palme, Herbert

    2008-07-01

    The precise knowledge of the initial 26Al/ 27Al ratio [( 26Al/ 27Al) 0] is crucial if we are to use the very first solid objects formed in our Solar System, calcium-aluminum-rich inclusions (CAIs) as the "time zero" age-anchor and guide future work with other short-lived radio-chronometers in the early Solar System, as well as determining the inventory of heat budgets from radioactivities for early planetary differentiation. New high-precision multi-collector inductively-coupled plasma mass spectrometry (MC-ICP-MS) measurements of 27Al/ 24Mg ratios and Mg-isotopic compositions of nine whole-rock CAIs (six mineralogically characterized fragments and three micro-drilled inclusions) from the CV carbonaceous chondrite, Allende yield a well-defined 26Al- 26Mg fossil isochron with an ( 26Al/ 27Al) 0 of (5.23 ± 0.13) × 10 - 5 . Internal mineral isochrons obtained for three of these CAIs ( A44A, AJEF, and A43) are consistent with the whole-rock CAI isochron. The mineral isochron of AJEF with ( 26Al/ 27Al) 0 = (4.96 ± 0.25) × 10 - 5 , anchored to our precisely determined absolute 207Pb- 206Pb age of 4567.60 ± 0.36 Ma for the same mineral separates, reinstate the "canonical" ( 26Al/ 27Al) 0 of 5 × 10 - 5 for the early Solar System. The uncertainty in ( 26Al/ 27Al) 0 corresponds to a maximum time span of ± 20 Ka (thousand years), suggesting that the Allende CAI formation events were culminated within this time span. Although all Allende CAIs studied experienced multistage formation history, including melting and evaporation in the solar nebula and post-crystallization alteration likely on the asteroidal parent body, the 26Al- 26Mg and U-Pb-isotopic systematics of the mineral separates and bulk CAIs behaved largely as closed-system since their formation. Our data do not support the "supra-canonical" 26Al/ 27Al ratio of individual minerals or their mixtures in CV CAIs, suggesting that the supra-canonical 26Al/ 27Al ratio in the CV CAIs may have resulted from post

  10. Radial macrosegregation and dendrite clustering in directionally solidified Al-7Si and Al-19Cu alloys

    NASA Astrophysics Data System (ADS)

    Ghods, M.; Johnson, L.; Lauer, M.; Grugel, R. N.; Tewari, S. N.; Poirier, D. R.

    2016-05-01

    Hypoeutectic Al-7 wt% Si and Al-19 wt% Cu alloys were directionally solidified upward in a Bridgman furnace through a range of constant growth speeds and thermal gradients. Though processing is thermo-solutally stable, flow initiated by gravity-independent advection at, slightly leading, central dendrites moves rejected solute out ahead and across the advancing interface. Here any lagging dendrites are further suppressed which promotes a curved solid-liquid interface and the eventual dendrite "clustering" seen in transverse sections (dendrite "steepling" in longitudinal orientations) as well as extensive radial macrosegregation. Both aluminum alloys showed considerable macrosegregation at the low growth speeds (10 and 30 μm s-1) but not at higher speed (72 μm s-1). Distribution of the fraction eutectic-constituent on transverse sections was determined in order to quantitatively describe radial macrosegregation. The convective mechanisms leading to dendrite-steepling were elucidated with numerical simulations, and their results compared with the experimental observations.

  11. Tunneling spectroscopy of Al/AlO{sub x}/Pb subjected to hydrostatic pressure

    SciTech Connect

    Zhu, Jun; Hou, Xing-Yuan; Guan, Tong; Zhang, Qin-Tong; Li, Yong-Qing; Han, Xiu-Feng; Li, Chun-Hong; Ren, Cong; Yang, Zheng-Xin; Zhang, Jin; Shan, Lei; Chen, Gen-Fu

    2015-05-18

    We develop an experimental tool to investigate high-pressure electronic density of state by combining electron tunneling spectroscopy measurements with high-pressure technique. It is demonstrated that tunneling spectroscopy measurement on Al/AlO{sub x}/Pb junction is systematically subjected to hydrostatic pressure up to 2.2 GPa. Under such high pressure, the normal state junction resistance is sensitive to the applied pressure, reflecting the variation of band structure of the barrier material upon pressures. In superconducting state, the pressure dependence of the energy gap Δ{sub 0}, the gap ratio 2Δ{sub 0}/k{sub B}T{sub c}, and the phonon spectral energy is extracted and compared with those obtained in the limited pressure range. Our experimental results show the accessibility and validity of high pressure tunneling spectroscopy, offering wealthy information about high pressure superconductivity.

  12. Microstructural characterization of Al-rich Ni-Cr-Al cast alloys

    SciTech Connect

    Gonzalez-Carrasco, J.L.; Adeva, P.; Cristina, M.C.; Aballe, M. )

    1994-09-01

    Several Ni-Cr-Al alloys, with up to 30 at.% Al, were prepared in an induction furnace and cast under inert atmosphere. All alloys were homogenized for 8 h at 1,473 K under an argon atmosphere, followed by treatments at temperatures between 1,023 and 1,273 K for times up to 180 h. These alloys contain phases that are to a great extent, structurally similar. This is frequently complicated further by their particle size and their degree of order. Their characterization is not always simple and usually must be based on more than one technique. In this work the microstructural evolution was studied by means of light microscopy, scanning electron microscopy and microanalysis, and X-ray diffraction techniques. For completeness, hardness and microhardness tests were performed to evaluate the precipitation phenomenon.

  13. Strange meson production in Al+Al collisions at 1.9 A GeV

    NASA Astrophysics Data System (ADS)

    Gasik, P.; Piasecki, K.; Herrmann, N.; Leifels, Y.; Matulewicz, T.; Andronic, A.; Averbeck, R.; Barret, V.; Basrak, Z.; Bastid, N.; Benabderrahmane, M. L.; Berger, M.; Buehler, P.; Cargnelli, M.; Čaplar, R.; Crochet, P.; Czerwiakowa, O.; Deppner, I.; Dupieux, P.; Dželalija, M.; Fabbietti, L.; Fodor, Z.; Gašparić, I.; Grishkin, Y.; Hartmann, O. N.; Hildenbrand, K. D.; Hong, B.; Kang, T. I.; Kecskemeti, J.; Kim, Y. J.; Kirejczyk, M.; Kiš, M.; Koczon, P.; Kotte, R.; Lebedev, A.; Le Fèvre, A.; Liu, J. L.; Lopez, X.; Manko, V.; Marton, J.; Münzer, R.; Petrovici, M.; Rami, F.; Reischl, A.; Reisdorf, W.; Ryu, M. S.; Schmidt, P.; Schüttauf, A.; Seres, Z.; Sikora, B.; Sim, K. S.; Simion, V.; Siwek-Wilczyńska, K.; Smolyankin, V.; Suzuki, K.; Tymiński, Z.; Wagner, P.; Weber, I.; Widmann, E.; Wiśniewski, K.; Xiao, Z. G.; Yushmanov, I.; Zhang, Y.; Zhilin, A.; Zinyuk, V.; Zmeskal, J.

    2016-06-01

    The production of K+, K- and φ (1020) mesons is studied in Al+Al collisions at a beam energy of 1.9A GeV which is close to or below the production threshold in NN reactions. Inverse slopes, anisotropy parameters, and total emission yields of K± mesons are obtained. A comparison of the ratio of kinetic energy distributions of K- and K+ mesons to the HSD transport model calculations suggests that the inclusion of the in-medium modifications of kaon properties is necessary to reproduce the ratio. The inverse slope and total yield of φ mesons are deduced. The contribution to K- production from φ meson decays is found to be [17 ± 3(stat)^{+2}_{-7}(syst)]%. The results are in line with the previous K± and φ data obtained for different colliding systems at similar incident beam energies.

  14. Removing Al and regenerating caustic soda from the spent washing liquor of Al etching

    NASA Astrophysics Data System (ADS)

    Barakat, M. A.; El-Sheikh, S. M.; Farghly, F. E.

    2005-08-01

    Spent liquor from washing of aluminum section materials after etching with caustic soda (NaOH) has been treated. Aluminum was removed from the liquor and caustic soda was regenerated by adding precipitating agents to hydrolyze sodium aluminate (Na2AlO2), separating the aluminumprecipitate, and concentrating free NaOH in the resulting solution for reuse in the etching process. Four systems were investigated: hydrated lime [Ca(OH)2], hydrogen peroxide (H2O2), H2O2/Ca(OH)2 mixture, and dry lime (CaO). Results revealed that CaO was more efficient in the removal of aluminum from the spent liquor with a higher hydrolyzing rate of Na2AlO2 than Ca(OH)2, H2O2, or their mixture.

  15. Response to Lynn, et al.'s "Evaluation of Woodard's theory of perceptually oriented hypnosis".

    PubMed

    Woodard, Fredrick J

    2004-04-01

    In this article some misunderstandings of Perceptually Oriented Hypnosis presented in the recent evaluation by Lynn, et al. are pointed out. Perceptually Oriented Hypnosis emphasizes individual differences naturally occurring in the experience of everyday life or being-in-the-world and differentiation as major themes to understanding hypnosis. Woodard advocates that qualitative research enhances our understanding of hypnotic experiencing and allows us to examine hypnotic phenomena that elude the laboratory and control settings. PMID:15154168

  16. Investigation of the Electrical Characteristics of Al/p-Si/Al Schottky Diode

    NASA Astrophysics Data System (ADS)

    Şenarslan, Elvan; Güzeldir, Betül; Sağlam, Mustafa

    2016-04-01

    In this study, p-type Si semiconductor wafer with (100) orientation, 400 μm thickness and 1-10 Ω cm resistivity was used. The Si wafer before making contacts were chemically cleaned with the Si cleaning procedure which for remove organic contaminations were ultrasonically cleaned at acetone and methanol for 10 min respectively and then rinsed in deionized water of 18 MΩ and dried with high purity N2. Then respectively RCA1(i.e., boiling in NH3+H2O2+6H2O for 10 min at 60°C ), RCA2 (i.e., boiling in HCl+H2O2+6H2O for 10 min at 60°C ) cleaning procedures were applied and rinsed in deionized water followed by drying with a stream of N2. After the cleaning process, the wafer is immediately inserted in to the coating unit. Ohmic contact was made by evaporating of Al on the non-polished side of the p-Si wafer pieces under ~ 4,2 10-6 Torr pressure. After process evaporation, p-Si with omic contac thermally annealed 580°C for 3 min in a quartz tube furnace in N2. Then, the rectifier contact is made by evaporation Al metal diameter of about 1.0 mm on the polished surface of p-Si in turbo molecular pump at about ~ 1 10-6 Torr. Consequently, Al/p-Si/Al Schottky diode was obtained. The I–V measurements of this diode performed by the use of a KEITLEY 487 Picoammeter/Voltage Source and the C–V measurements were performed with HP 4192A (50–13 MHz) LF Impedance Analyzer at room temperature and in dark.

  17. Near-infrared OPO in an AlGaAs/AlOx waveguide

    NASA Astrophysics Data System (ADS)

    Ozanam, C.; Savanier, M.; Lanco, L.; Lafosse, X.; Andronico, A.; Favero, I.; Ducci, S.; Leo, G.

    2013-12-01

    Within the ambitious quest for an electrically pumped version of the optical parametric oscillator (OPO), we demonstrate the first near-infrared integrated OPO in a direct gap semiconductor. This nonlinear device is based on a selectively oxidized GaAs/AlAs heterostructure, the same "AlOx" technology that is at the heart of VCSEL fabrication. The heterostructure and waveguide design allows for type-I form-birefringent phase matching, with a TM00 pump around 1 μm and TE00 signal and idler around 2 μm. Relying on the high non-resonant χ(2) of GaAs, relatively weak guided-wave optical losses, and monolithic SiO2/TiO2 dichroic Bragg mirrors, we observe a threshold of 210 mW at degeneracy in the continuous-wave regime, with a single-pass-pump doubly resonant scheme. Further improvement can be achieved by adopting a double-pump-pass scheme and, in a more fundamental way, by further optimizing the waveguide optical losses. The latter are induced by a not entirely mastered AlAs oxidation process and are of two distinct types: Rayleighlike scattering at signal and idler wavelength (α <= 1cm-1), due to the interface roughness between GaAs and AlOx layers; and absorption at pump wavelengths (α ≍ 3cm-1), due to volume defects in the GaAs layers adjacent to the aluminum oxide. This result marks a milestone for integrated nonlinear photonics and represents a significant step toward the goal of a broadly tunable coherent light source on chip.

  18. Oxidation of Fe-Cr-Al and Fe-Cr-Al-Y Single Crystals

    NASA Astrophysics Data System (ADS)

    Grabke, H. J.; Siegers, M.; Tolpygo, V. K.

    1995-03-01

    Single crystal samples of the alloy Fe-20%Cr-5%Al with and without Y-doping were used to study the "reactive element" (RE) effect, which causes improved oxidation behaviour and formation of a protective Al2O3 layer on this alloy. The oxidation was followed by AES at 10-7 mbar O2 up to about 1000 °C. Most observations were peculiar for this low pO2 environment, but yttrium clearly favors the formation of Al-oxide and stabilizes it also under these conditions, probably by favoring its nucleation. The oxides formed are surface compounds of about monolayer thickness, not clearly related to bulk oxides. Furthermore, the morphologies of oxide scales were investigated by SEM, after oxidation at 1000°C for 100 h at 133 mbar O2. On Fe-Cr-Al the scale is strongly convoluted and tends to spalling, whereas the presence of Y leads to flat scales which are well adherent. This difference is explained by a change in growth mechanism. The tendency for separation of oxide and metal was highest for the samples with low energy metal surface, i.e. (100) and (110), the scale was better adherent on the (111) oriented surface and on the polycrystalline specimen, since in the latter cases the overall energy for scale/metal separation is higher. All observations, from the low and from the high pO2 experiments, are discussed in relation to the approximately ten mechanisms proposed in the literature for explanation of the RE effects.

  19. Investigation of the Electrical Characteristics of Al/p-Si/Al Schottky Diode

    NASA Astrophysics Data System (ADS)

    Şenarslan, Elvan; Güzeldir, Betül; Sağlam, Mustafa

    2016-04-01

    In this study, p-type Si semiconductor wafer with (100) orientation, 400 μm thickness and 1-10 Ω cm resistivity was used. The Si wafer before making contacts were chemically cleaned with the Si cleaning procedure which for remove organic contaminations were ultrasonically cleaned at acetone and methanol for 10 min respectively and then rinsed in deionized water of 18 MΩ and dried with high purity N2. Then respectively RCA1(i.e., boiling in NH3+H2O2+6H2O for 10 min at 60°C ), RCA2 (i.e., boiling in HCl+H2O2+6H2O for 10 min at 60°C ) cleaning procedures were applied and rinsed in deionized water followed by drying with a stream of N2. After the cleaning process, the wafer is immediately inserted in to the coating unit. Ohmic contact was made by evaporating of Al on the non-polished side of the p-Si wafer pieces under ~ 4,2 10-6 Torr pressure. After process evaporation, p-Si with omic contac thermally annealed 580°C for 3 min in a quartz tube furnace in N2. Then, the rectifier contact is made by evaporation Al metal diameter of about 1.0 mm on the polished surface of p-Si in turbo molecular pump at about ~ 1 10-6 Torr. Consequently, Al/p-Si/Al Schottky diode was obtained. The I-V measurements of this diode performed by the use of a KEITLEY 487 Picoammeter/Voltage Source and the C-V measurements were performed with HP 4192A (50-13 MHz) LF Impedance Analyzer at room temperature and in dark.

  20. An ab initio study on atomic and electronic structures of two-dimensional Al3Ti at Al/TiB2 interface

    NASA Astrophysics Data System (ADS)

    Men, H.

    2016-09-01

    The atomic and electronic structures of a two-dimentional (2D) Al3Ti layer at Al/TiB2 interface has been investigated using first-principle calculations. The result reveals the 2D-Al3Ti adopts the structure of bulk Al3Ti. There exists a strong Ti(3d)–Al(3p) hybridization between Ti and Al atoms of the 2D-Al3Ti, as well as between surface Ti atoms of TiB2 and Al atoms of 2D-Al3Ti. It leads to a stronger covalent Ti–Al bonding at the Al/2D–Al3Ti/TiB2 interface than at the Al/TiB2 interface, which is responsible for the stability of 2D-Al3Ti.

  1. A simple method to directly synthesize Al-SBA-15 mesoporous materials with different Al contents

    NASA Astrophysics Data System (ADS)

    Wang, Jiacheng; Liu, Qian

    2008-12-01

    Aluminum-incorporated SBA-15 materials with well-ordered structure, high surface area and narrow pore-size distribution were directly prepared by an evaporation-induced self-assembly (EISA) method. Our synthesis method with two unique points of no mineral acid and hydrothermal treatment, is very simple, efficient and energy-saving by using the corresponding chloride precursors which can generate proper acidity in the synthesis solutions. The mesopores ordering degree of Al-SBA-15 materials decreased when the Al/Si atomic ratio was either larger than 0.08 or smaller than 0.05. The powder X-ray diffraction (XRD), N 2 sorption and transmission electron microscopy (TEM) characterizations show that the resultant materials have well ordered hexagonal mesostructures. The 27Al magic angle spinning (MAS) NMR characterizations show that most of the aluminum ions incorporate into the SBA-15 framework. The thermal analysis was used to probe the interaction between the silica species and copolymer templates.

  2. Deformation and Phase Transformations During Cyclic Oxidation of Ni-Al and Ni-Pt-Al

    SciTech Connect

    Pint, Bruce A; Speakman, Scott A; Rawn, Claudia J; Zhang, Ying

    2006-01-01

    The reversible high-temperature {gamma}' to {beta} phase transformation may be critical to explaining the unusual high-temperature oxidation behavior of (Ni,Pt)Al alloys and coatings. During high-temperature, high-frequency (1 h) cyclic oxidation in dry, flowing O{sub 2}, unprecedented macroscopic deformation was observed in two-phase ({gamma}'+{beta}) cast specimens of Hf-doped Ni-Al at 1,150 C and Hf-doped Ni-Pt-Al at 1,100 and 1,150 C, Outside of this two-phase field or when the cycle frequency was decreased to 100h, no deformation was observed. Using high-temperature x-ray diffraction in an inert environment, the {beta}-to-{gamma}' phase ratio was observed to increase above 1,000 C, causing a 2.5% volume change. The addition of platinum appeared to lower the transformation temperature consistent with the deformation observed in castalloys and rumpling of simple and platinum-modified aluminide coatings.

  3. ALS liquid hydrogen turbopump: Advanced Development Program

    NASA Technical Reports Server (NTRS)

    Shimp, Nancy R.; Claffy, George J.

    1989-01-01

    The point of departure (POD) turbopump concept was reviewed and finalized. The basis for the POD was the configuration presented in the Aerojet proposal. After reviewing this proposal concept, several modifications were made. These modifications include the following: (1) the dual pump discharge arrangement was changed to a single discharge; (2) commonality of the turbine inlet manifold with the advanced launch system (ALS) liquid oxygen (LOX) TPA was dropped for this program; (3) the turbine housing flange arrangement was improved by relocating it away from the first stage nozzles; (4) a ten percent margin (five percent diameter increase) was built into the impeller design to ensure meeting the required discharge pressure without the need for increasing speed; (5) a ten percent turbine power margin was imposed which is to be obtained by increasing turbine inlet pressure if required; and (6) the backup concept, as an alternative to the use of cast impellers, now incorporates forged/machined shrouded impellers, rather than the unshrouded type originally planned.

  4. Whisker Formation in Porosity in Al Alloys

    NASA Astrophysics Data System (ADS)

    Griffiths, William David; Elsayed, Ahmed; El-Sayed, Mahmoud Ahmed

    2016-09-01

    An examination of the fracture surfaces of tensile test bars from Al alloy castings held in the liquid state for up to 20 minutes revealed porosity which in some cases contained whisker-like features. Energy-dispersive X-ray analysis in a SEM suggested that these might be oxide whiskers forming in an oxide-related pore or double oxide film defect. Such entrainment defects (also known as bifilms) may entrap a small amount of the local atmosphere when they form and become incorporated into the liquid metal. This atmosphere may be predominantly air, which then subsequently reacts with the surrounding melt, firstly by reaction with oxygen and secondly by reaction with nitrogen. A CFD model of the heat distribution associated with the reactions between the interior atmosphere of a double oxide film defect and the surrounding liquid alloy suggested that highly localized increases in temperature, up to about 2000 K to 5000 K (1727 °C to 4727 °C), could occur, over a scale of a few hundred micrometers. Such localized increases in temperature might lead to the evaporation or disassociation of oxide within the pore, followed by condensation, to form the whisker structures observed. Hydrogen might also be expected to diffuse into the bifilm and may play a role in the chemical reactions associated with the development of the bifilm.

  5. 3DGRAPE/AL User's Manual

    NASA Technical Reports Server (NTRS)

    Sorenson, Reese L.; Alter, Stephen J.

    1995-01-01

    This document is a users' manual for a new three-dimensional structured multiple-block volume g generator called 3DGRAPE/AL. It is a significantly improved version of the previously-released a widely-distributed programs 3DGRAPE and 3DMAGGS. It generates volume grids by iteratively solving the Poisson Equations in three-dimensions. The right-hand-side terms are designed so that user-specific; grid cell heights and user-specified grid cell skewness near boundary surfaces result automatically, with little user intervention. The code is written in Fortran-77, and can be installed with or without a simple graphical user interface which allows the user to watch as the grid is generated. An introduction describing the improvements over the antecedent 3DGRAPE code is presented first. Then follows a chapter on the basic grid generator program itself, and comments on installing it. The input is then described in detail. After that is a description of the Graphical User Interface. Five example cases are shown next, with plots of the results. Following that is a chapter on two input filters which allow use of input data generated elsewhere. Last is a treatment of the theory embodied in the code.

  6. A fruitful endeavor: modeling ALS in the fruit fly.

    PubMed

    Casci, Ian; Pandey, Udai Bhan

    2015-05-14

    For over a century Drosophila melanogaster, commonly known as the fruit fly, has been instrumental in genetics research and disease modeling. In more recent years, it has been a powerful tool for modeling and studying neurodegenerative diseases, including the devastating and fatal amyotrophic lateral sclerosis (ALS). The success of this model organism in ALS research comes from the availability of tools to manipulate gene/protein expression in a number of desired cell-types, and the subsequent recapitulation of cellular and molecular phenotypic features of the disease. Several Drosophila models have now been developed for studying the roles of ALS-associated genes in disease pathogenesis that allowed us to understand the molecular pathways that lead to motor neuron degeneration in ALS patients. Our primary goal in this review is to highlight the lessons we have learned using Drosophila models pertaining to ALS research. This article is part of a Special Issue entitled ALS complex pathogenesis.

  7. Mechanical Properties of High Strength Al-Mg Alloy Sheet

    NASA Astrophysics Data System (ADS)

    Choi, Bong-Jae; Hong, Kyung-Eui; Kim, Young-Jig

    The aim of this research is to develop the high strength Al alloy sheet for the automotive body. For the fabrication Al-Mg alloy sheet, the composition of alloying elements was designed by the properties database and CALPHAD (Calculation Phase Diagram) approach which can predict the phases during solidification using thermodynamic database. Al-Mg alloys were designed using CALPHAD approach according to the high content of Mg with minor alloying elements. After phase predictions by CALPHAD, designed Al-Mg alloys were manufactured. Addition of Mg in Al melts were protected by dry air/Sulphur hexafluoride (SF6) mixture gas which can control the severe Mg ignition and oxidation. After rolling procedure of manufactured Al-Mg alloys, mechanical properties were examined with the variation of the heat treatment conditions.

  8. Reactive codoping of GaAlInP compound semiconductors

    DOEpatents

    Hanna, Mark Cooper; Reedy, Robert

    2008-02-12

    A GaAlInP compound semiconductor and a method of producing a GaAlInP compound semiconductor are provided. The apparatus and method comprises a GaAs crystal substrate in a metal organic vapor deposition reactor. Al, Ga, In vapors are prepared by thermally decomposing organometallic compounds. P vapors are prepared by thermally decomposing phospine gas, group II vapors are prepared by thermally decomposing an organometallic group IIA or IIB compound. Group VIB vapors are prepared by thermally decomposing a gaseous compound of group VIB. The Al, Ga, In, P, group II, and group VIB vapors grow a GaAlInP crystal doped with group IIA or IIB and group VIB elements on the substrate wherein the group IIA or IIB and a group VIB vapors produced a codoped GaAlInP compound semiconductor with a group IIA or IIB element serving as a p-type dopant having low group II atomic diffusion.

  9. Natural growth habit of bulk AlN crystals

    NASA Astrophysics Data System (ADS)

    Epelbaum, B. M.; Seitz, C.; Magerl, A.; Bickermann, M.; Winnacker, A.

    2004-05-01

    Growth conditions for self-nucleation and subsequent growth of bulk AlN crystals by sublimation are presented. With increasing growth temperature, the natural habit of AlN crystals changes from needle-like to prismatic and then turns to thick asymmetric platelet. The best-formed platelet crystals up to 14×7×2 mm 3 in size exhibit a number of atomically smooth surfaces. Growth morphology and crystal quality were found to be strongly influenced by the polar nature of AlN. Al-terminated faces produce mirror-like facets and transparent material of high crystalline quality, whereas development of N-terminated faces leads to opaque and defective sectors in grown crystals. It is suggested that the most successful seeded growth of AlN can be achieved along Al-terminated (0 0 0 1) , ( 1¯ 0 1 2) and non-polar ( 1¯ 0 1 0) faces.

  10. Cost-Effective TiAl based Materials

    NASA Technical Reports Server (NTRS)

    Moxson, V. S.; Sun, Fusheng; Draper, Susan L.; Froes, F. H.; Duz, V.

    2003-01-01

    Because of their inherent low ductility, TiAl-based materials are difficult to fabricate, especially thin gage titanium gamma aluminide (TiAl) sheet and foil. In this paper, an innovative powder metallurgy approach for producing cost-effective thin gage TiAl sheets (with 356 mm long and 235 mm wide, and a thickness of 0.74, 1.09, 1.55, and 2.34 mm, respectively) is presented. The microstructures and tensile properties at room and elevated temperatures of the thin gage TiAl are studied. Results show that these TiAl sheets have a relatively homogenous chemistry, uniform microstructure, and acceptable mechanical properties. This work demonstrates a cost-effective method for producing both flat products (sheet/foil) and complex chunky parts of TiAl for various advanced applications including aerospace and automotive industries.

  11. Na3Al(AsO4)2

    PubMed Central

    Fakhar Bourguiba, Noura; Zid, Mohamed Faouzi; Driss, Ahmed

    2013-01-01

    The structure of the title compound tris­odium aluminium bis­(arsenate), Na3Al(AsO4)2, is built up from AlO4 and AsO4 corner-sharing tetra­hedra, forming an undulating two-dimensional framework parallel to (100). The layers are constituted of large Al6As6O36 rings made up from six AlO4 and AsO4 tetra­hedra in which two sodium cations are situated, the third sodium cation being located in the inter­layer space. The structural relationships between the title compound and Na3Fe(PO4)2, NaAlCo(PO4)2 and Al5Co3(PO4)8 are discussed. PMID:23424394

  12. Corrosion Behaviour of Al Alloys in Sea Water

    SciTech Connect

    Kamarudin, S. R. M.; Daud, M.; Muhamad, A.; Sattar, M. S.; Daud, A. R.

    2010-03-11

    The electrochemical behaviour of aluminum (Al) alloys in seawater medium was investigated using potentiodynamic technique, complemented by Scanning Electron Microscopy (SEM) and EDAX. SEM was used to characterize the corroded surface and to observe the extent of corrosion attack on the Al alloys after tested in seawater. EDAX analysis was used to identify elements present on the specimen surface. The results indicate that influences of alloying elements present in the Al alloys play important role in the corrosion of Al alloys in seawater. The behaviour of Al alloys with addition of Zn, Sn, Cu and Si was greatly enhanced in terms of its potential and corrosion behaviour. Potential of Al with alloying elements reached value more negative than -0.9 V{sub SCE} and showed active corrosion behaviour.

  13. Preparation of Al-Cr-Fe Coatings by Heat Treatment of Electrodeposited Cr/Al Composite Coatings

    NASA Astrophysics Data System (ADS)

    Zhang, Min; Chen, Chang'an; Zhang, Guikai; Rao, Yongchu; Ling, Guoping

    Al-Cr-Fe coatings have been widely used in the surface engineering field of materials, due to their excellent corrosion resistance to water vapor and fused salt deposits. In this study, a new two-step approach was developed to prepare Al-Cr-Fe coatings on surfaces of SUS430 stainless steels. First, the Cr/Al composite coatings were prepared by electrodepositing Cr from aqueous solution then electrodepositing Al from AlCl3-1-ethyl-3-methyl-imidazolium chloride (AlCl3-EMIC) ionic liquid on SUS430 stainless steel substrate. In the second, heat treatment of the Cr/Al composite coatings was carried out to acquire Al-Cr-Fe coatings. Effects of the thickness of Cr/Al composite coatings, the time and temperature of heat treatment on composition and phase structure of alloy layers were studied by using scanning electron microscope (SEM), backscattered electron (BSE), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD). The structure transformation process and formation mechanism of Al-Cr-Fe coatings were discussed.

  14. X-ray absorption spectroscopy studies on magnetic tunnel junctions with AlO and AlN tunnel barriers

    SciTech Connect

    Mun, B. S.; Moon, J. C.; Hong, S. W.; Kang, K. S.; Kim, K.; Kim, T. W.; Ju, H. L.

    2006-04-15

    X-ray photoelectron spectroscopy (XPS) and x-ray absorption spectroscopy (XAS) measurements of the optimized magnetic tunnel junctions (MTJs) with AlO and AlN barriers have been performed to study the chemical structures of the barrier and the underlying layer. These MTJs with AlO and AlN barriers exhibited increased tunneling magnetoresistance (TMR) after annealing at 200 deg. C from 27% to 45% and from 25% to 33%, respectively. Surprisingly, the XPS and XAS measurements confirmed that both the as-grown and the annealed MTJs had metallic Co and Fe at the interface between the barrier and the underlying CoFe layer. After annealing, under-stoichiometric AlO{sub x} and AlN{sub x} phases in MTJs with AlO and AlN barriers partially transformed into stoichiometric Al{sub 2}O{sub 3} and AlN phases, respectively. Thus the increase in TMR after annealing for MTJs with clean interface between the barrier and the underlying layer is believed due to the anion redistribution inside the barrier layer, not from back diffusion from pinned magnetic layer to barrier layer.

  15. Ab initio study on the electronic states and laser cooling of AlCl and AlBr

    NASA Astrophysics Data System (ADS)

    Rong, Yang; Bin, Tang; Tao, Gao

    2016-04-01

    We investigate whether AlCl and AlBr are promising candidates for laser cooling. We report new ab initio calculations on the ground state X1Σ+ and two low-lying states (A1Π and a3Π) of AlCl and AlBr. The calculated spectroscopic constants show good agreement with available theoretical and experimental results. We also obtain the permanent dipole moments (PDMs) curve at multi-reference configuration interaction (MRCI) level of theory. The transition properties of A1Π and a3Π states are predicted, including the transition dipole moments (TDMs), Franck-Condon factors (FCFs), radiative times and radiative width. The calculated radiative lifetimes are of the order of a nanosecond, implying that they are sufficiently short for rapid laser cooling. Both AlCl and AlBr have highly diagonally distributed FCFs which are crucial requirement for molecular laser cooling. The results demonstrate the feasibility of laser cooling AlCl and AlBr, and we propose laser cooling schemes for AlCl and AlBr.

  16. Al environment in tectosilicate and peraluminous glasses: A 27Al MQ-MAS NMR, Raman, and XANES investigation

    NASA Astrophysics Data System (ADS)

    Neuville, Daniel R.; Cormier, Laurent; Massiot, Dominique

    2004-12-01

    Tecto-aluminosilicate and peraluminous glasses have been prepared by conventional and laser heating techniques, respectively, in the CaO-Al 2O 3-SiO 2 system. The structure of these glasses were studied using Raman spectroscopy, X-ray absorption at the Al K-edge and 27Al NMR spectroscopy with two different high fields (400 and 750 MHz). Raman spectroscopy and X-ray absorption are techniques sensitive to the network polymerization and, in particular, show different signal as a function of silica content. However, these two techniques are less sensitive than NMR to describe the local aluminium environment. For tectosilicate glasses, aluminium in five-fold coordination, [5]Al, was found and a careful quantification allows the determination of a significant amount of [5]Al (7% in the anorthite glass). The proportion of [5]Al increases for the peraluminous glasses with small amounts (<2%) of six-fold coordination, [6]Al. The presence of [5]Al agrees with previous observations of the existence of nonbridging oxygens (NBOs) in tectosilicate compositions. However, the proportion of [5]Al in the present study indicates that no major proportion of triclusters (oxygen coordinated to three (Si,Al)O 4 tetrahedra) is required to explain these NBOS.

  17. 77 FR 4083 - Amendment of the Designation of al-Qa'ida in Iraq, et al. as a Specially Designated Global...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-26

    ... of Operations in Iraq, aka al-Qaida of Jihad in Iraq, aka al-Qaida in Iraq, aka al-Qaida in Mesopotamia, aka al-Qaida in the Land of the Two Rivers, aka al-Qaida of the Jihad in the Land of the Two Rivers, aka al-Qaida of Jihad Organization in the Land of the Two Rivers, aka al-Qaida Group of......

  18. 77 FR 4082 - Review and Amendment of the Designation of al-Qa'ida in Iraq, et al. as a Foreign Terrorist...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-26

    ... The Organization of al-Jihad's Base of Operations in Iraq, aka al-Qaida of Jihad in Iraq, aka al-Qaida in Iraq, aka al-Qaida in Mesopotamia, aka al-Qaida in the Land of the Two Rivers, aka al-Qaida of the Jihad in the Land of the Two Rivers, aka al-Qaida of Jihad Organization in the Land of the Two......

  19. Directional solidification and microstructural control of the TiAl/Ti{sub 3}Al lamellar microstructure in TiAl-Si alloys

    SciTech Connect

    Johnson, D.R.; Inui, H.; Yamaguchi, M.

    1996-06-01

    Composite microstructures were grown from TiAl-Si alloys with the gamma/alpha2 lamellar microstructure aligned parallel to the growth direction by directional solidification techniques using a seed material. Within the composition range of 40--50 at% Al, the addition of Si to TiAl shifts the primary alpha region towards a much lower Al content. At a composition of Ti-43Al-3Si, either alpha or alpha2 can be stable, from melting temperature to room temperature and the orientation of the lamellar microstructure can be controlled using a seed material. In addition to the gamma/alpha2 lamellae, large Ti{sub 5}Si{sub 3} particles which formed from the liquid, and much smaller Ti{sub 5}Si{sub 3} particles which formed from an eutectoid reaction were observed. The room temperature mechanical properties were determined by tensile and three-point bend tests. From bend specimens oriented with the notch parallel to the lamellar microstructure, the Ti-43Al-3Si alloy was found to have a greater fracture toughness than a TiAl-PST crystal of the same orientation.

  20. Elastocaloric effect in CuAlZn and CuAlMn shape memory alloys under compression.

    PubMed

    Qian, Suxin; Geng, Yunlong; Wang, Yi; Pillsbury, Thomas E; Hada, Yoshiharu; Yamaguchi, Yuki; Fujimoto, Kenjiro; Hwang, Yunho; Radermacher, Reinhard; Cui, Jun; Yuki, Yoji; Toyotake, Koutaro; Takeuchi, Ichiro

    2016-08-13

    This paper reports the elastocaloric effect of two Cu-based shape memory alloys: Cu68Al16Zn16 (CuAlZn) and Cu73Al15Mn12 (CuAlMn), under compression at ambient temperature. The compression tests were conducted at two different rates to approach isothermal and adiabatic conditions. Upon unloading at a strain rate of 0.1 s(-1) (adiabatic condition) from 4% strain, the highest adiabatic temperature changes (ΔTad) of 4.0 K for CuAlZn and 3.9 K for CuAlMn were obtained. The maximum stress and hysteresis at each strain were compared. The stress at the maximum recoverable strain of 4.0% for CuAlMn was 120 MPa, which is 70% smaller than that of CuAlZn. A smaller hysteresis for the CuAlMn alloy was also obtained, about 70% less compared with the CuAlZn alloy. The latent heat, determined by differential scanning calorimetry, was 4.3 J g(-1) for the CuAlZn alloy and 5.0 J g(-1) for the CuAlMn alloy. Potential coefficients of performance (COPmat) for these two alloys were calculated based on their physical properties of measured latent heat and hysteresis, and a COPmat of approximately 13.3 for CuAlMn was obtained.This article is part of the themed issue 'Taking the temperature of phase transitions in cool materials'. PMID:27402936