Science.gov

Sample records for alamo heights independent

  1. Camera-based independent couch height verification in radiation oncology.

    PubMed

    Kusters, Martijn; Louwe, Rob; Biemans-van Kastel, Liesbeth; Nieuwenkamp, Henk; Zahradnik, Rien; Claessen, Roy; van Seters, Ronald; Huizenga, Henk

    2015-01-01

    For specific radiation therapy (RT) treatments, it is advantageous to use the isocenter-to-couch distance (ICD) for initial patient setup.(1) Since sagging of the treatment couch is not properly taken into account by the electronic readout of the treatment machine, this readout cannot be used for initial patient positioning using the isocenter-to-couch distance (ICD). Therefore, initial patient positioning to the prescribed ICD has been carried out using a ruler prior to each treatment fraction in our institution. However, the ruler method is laborious and logging of data is not possible. The objective of this study is to replace the ruler-based setup of the couch height with an independent, user-friendly, optical camera-based method whereby the radiation technologists have to move only the couch to the correct couch height, which is visible on a display. A camera-based independent couch height measurement system (ICHS) was developed in cooperation with Panasonic Electric Works Western Europe. Clinical data showed that the ICHS is at least as accurate as the application of a ruler to verify the ICD. The camera-based independent couch height measurement system has been successfully implemented in seven treatment rooms, since 10 September 2012. The benefits of this system are a more streamlined workflow, reduction of human errors during initial patient setup, and logging of the actual couch height at the isocenter. Daily QA shows that the systems are stable and operate within the set 1 mm tolerance. Regular QA of the system is necessary to guarantee that the system works correctly. PMID:26699308

  2. Fear of heights and mild visual height intolerance independent of alcohol consumption

    PubMed Central

    Huppert, Doreen; Grill, Eva; Kapfhammer, Hans-Peter; Brandt, Thomas

    2013-01-01

    Background Visual height intolerance occurs when a visual stimulus causes apprehension of losing balance and falling from some height. Affecting one-third of the population, it has a broad spectrum of symptoms, ranging from minor distress to fear of heights, which is defined as a specific phobia. Specific phobias are associated with higher alcohol consumption. This has not been specifically shown for susceptibility to the more general visual height intolerance. Methods Representative case–control study nested within a population-based cross-sectional telephone survey to assess epidemiologically 1253 individuals ≥14 years, using a questionnaire on sociodemographic data, typical symptoms, precipitating visual stimuli, and alcohol drinking patterns (overall frequency of alcohol consumption, the daily quantities, and the motives). Results Individuals susceptible or nonsusceptible to visual height intolerance showed no significant differences in drinking patterns. The daily average alcohol consumption was slightly higher in persons susceptible to visual height intolerance (4.1 g/day vs. 3.7 g/day). Of those consuming alcohol, cases and controls reported on average consuming 2.3 glasses per day. The prevalence of visual height intolerance was insignificantly higher in the small minority of those drinking 2–3 times per week versus teetotalers. Conclusions Our study does not provide evidence that visual height intolerance – contrary to various specific phobias – is significantly associated with individual alcohol consumption patterns. PMID:24392279

  3. Fear of heights and mild visual height intolerance independent of alcohol consumption.

    PubMed

    Huppert, Doreen; Grill, Eva; Kapfhammer, Hans-Peter; Brandt, Thomas

    2013-09-01

    Background Visual height intolerance occurs when a visual stimulus causes apprehension of losing balance and falling from some height. Affecting one-third of the population, it has a broad spectrum of symptoms, ranging from minor distress to fear of heights, which is defined as a specific phobia. Specific phobias are associated with higher alcohol consumption. This has not been specifically shown for susceptibility to the more general visual height intolerance. Methods Representative case-control study nested within a population-based cross-sectional telephone survey to assess epidemiologically 1253 individuals ≥14 years, using a questionnaire on sociodemographic data, typical symptoms, precipitating visual stimuli, and alcohol drinking patterns (overall frequency of alcohol consumption, the daily quantities, and the motives). Results Individuals susceptible or nonsusceptible to visual height intolerance showed no significant differences in drinking patterns. The daily average alcohol consumption was slightly higher in persons susceptible to visual height intolerance (4.1 g/day vs. 3.7 g/day). Of those consuming alcohol, cases and controls reported on average consuming 2.3 glasses per day. The prevalence of visual height intolerance was insignificantly higher in the small minority of those drinking 2-3 times per week versus teetotalers. Conclusions Our study does not provide evidence that visual height intolerance - contrary to various specific phobias - is significantly associated with individual alcohol consumption patterns.

  4. Equivalent water height extracted from GRACE gravity field model with robust independent component analysis

    NASA Astrophysics Data System (ADS)

    Guo, Jinyun; Mu, Dapeng; Liu, Xin; Yan, Haoming; Dai, Honglei

    2014-08-01

    The Level-2 monthly GRACE gravity field models issued by Center for Space Research (CSR), GeoForschungs Zentrum (GFZ), and Jet Propulsion Laboratory (JPL) are treated as observations used to extract the equivalent water height (EWH) with the robust independent component analysis (RICA). The smoothing radii of 300, 400, and 500 km are tested, respectively, in the Gaussian smoothing kernel function to reduce the observation Gaussianity. Three independent components are obtained by RICA in the spatial domain; the first component matches the geophysical signal, and the other two match the north-south strip and the other noises. The first mode is used to estimate EWHs of CSR, JPL, and GFZ, and compared with the classical empirical decorrelation method (EDM). The EWH STDs for 12 months in 2010 extracted by RICA and EDM show the obvious fluctuation. The results indicate that the sharp EWH changes in some areas have an important global effect, like in Amazon, Mekong, and Zambezi basins.

  5. Environmental surveillance at Los Alamos: an independent reassessment of historical data.

    PubMed

    Silver, Ken; Clapp, Richard

    2006-08-01

    Since 1971, a series of annual Environmental Surveillance ... reports have served as the official public record of Los Alamos National Laboratory's (LANL) environmental performance. In northern New Mexico, where past LANL emissions are a public health concern, there is public skepticism over the accuracy of information contained in these reports. To test the hypothesis that LANL Environmental Surveillance ... reports systematically understate past emissions, we compared the data on releases in LANL's own internal Occurrence Reports Collection (ORC) to the data reported to the public in the Environmental Surveillance ... reports. A data set of 89 environmental occurrences recorded in the ORC in the time period from 1971 through 1980 was assembled. We did not find a systematic pattern of quantitative underreporting of source terms. However, 17 of the 89 (19%) environmental occurrences recorded in the ORC were not reported to the public in the Environmental Surveillance ... reports. The observed discrepancies are discussed in terms of their relevance to public health concerns. Methodological caveats dictate restraint in applying these findings beyond the scope of the relative comparison performed here. Possible social origins for the rejected hypothesis are discussed. Areas for further consideration by the Centers for Disease Control's dose reconstruction study of LANL are identified.

  6. INDEPENDENT COMPONENT ANALYSIS (ICA) APPLIED TO LONG BUNCH BEAMS IN THE LOS ALAMOS PROTON STORAGE RING

    SciTech Connect

    Kolski, Jeffrey S.; Macek, Robert J.; McCrady, Rodney C.; Pang, Xiaoying

    2012-05-14

    Independent component analysis (ICA) is a powerful blind source separation (BSS) method. Compared to the typical BSS method, principal component analysis (PCA), which is the BSS foundation of the well known model independent analysis (MIA), ICA is more robust to noise, coupling, and nonlinearity. ICA of turn-by-turn beam position data has been used to measure the transverse betatron phase and amplitude functions, dispersion function, linear coupling, sextupole strength, and nonlinear beam dynamics. We apply ICA in a new way to slices along the bunch and discuss the source signals identified as betatron motion and longitudinal beam structure.

  7. Height and body composition determine arm propulsive force in youth swimmers independent of a maturation stage.

    PubMed

    Moura, Tatiane; Costa, Manoel; Oliveira, Saulo; Júnior, Marcos Barbosa; Ritti-Dias, Raphael; Santos, Marcos

    2014-09-29

    The aim of this study was to examine the relationship between anthropometric variables, body composition and propulsive force in swimmers aged 9-17 years. Anthropometric characteristics (body height and mass, sitting height, arm span, arm muscle area and body composition) and the propulsive force of the arm (tethered swimming test) were evaluated in 56 competitive male swimmers. Tanner's stages of genital maturation (P1-5) were used. The data analysis included correlations and multiple linear regression. The propulsive force of the arm was correlated with body height (r = 0.34; p =0.013), arm span (r = 0.29; p =0.042), sitting height (r = 0.36; p =0.009), % body fat (r = 0.33; p =0.016), lean body mass (r = 0.34; p =0.015) and arm muscle area (r = 0.31; p =0.026). Using multiple linear regression models, the percent body fat and height were identified as significant predictors of the propulsive force of the arm after controlling for the maturation stage. This model explained 22% (R2 = 0.22) of associations. In conclusion, the propulsive force of swimmers was related to body height and percent body fat. PMID:25414760

  8. Resolving the Azimuthal Ambiguity in Vector Magnetogram Data with the Divergence-Free Condition: Implementations for Disambiguating Each Height Independently

    NASA Astrophysics Data System (ADS)

    Crouch, A. D.

    2015-10-01

    We continue the investigation of how to use the divergence-free condition to resolve the azimuthal ambiguity present in vector magnetogram data. In previous articles by Crouch, Barnes, and Leka ( Solar Phys. 260, 271, 2009) and Crouch ( Solar Phys. 282, 107, 2013), all methods used an expression for the divergence of the magnetic field that involves differentiation of quantities that depend on the choice of azimuthal angle. As a result, all heights used to approximate line-of-sight derivatives should generally be disambiguated simultaneously. In this article, we investigate a set of methods that use an expression for the divergence that involves differentiation of quantities that do not depend on the choice of azimuthal angle. This results in an expression for the divergence that can be used to disambiguate each height independently. We test two methods using synthetic data and find that the two-step hybrid method, adapted to disambiguate each height independently, generally produces reasonable results. Moreover, the time required to compute solutions is substantially decreased in comparison to the corresponding method that disambiguates all relevant heights simultaneously.

  9. An independent evaluation of plutonium body burdens in populations near Los Alamos Laboratory using human autopsy data.

    PubMed

    Gaffney, Shannon H; Donovan, Ellen P; Shonka, Joseph J; Le, Matthew H; Widner, Thomas E

    2013-06-01

    In the mid-1940s, the United States began producing atomic weapon components at the Los Alamos National Laboratory (LANL). In an attempt to better understand historical exposure to nearby residents, this study evaluates plutonium activity in human tissue relative to residential location and length of time at residence. Data on plutonium activity in the lung, vertebrae, and liver of nearby residents were obtained during autopsies as a part of the Los Alamos Tissue Program. Participant residential histories and the distance from each residence to the primary plutonium processing buildings at LANL were evaluated in the analysis. Summary statistics, including Student t-tests and simple regressions, were calculated. Because the biological half-life of plutonium can vary significantly by organ, data were analyzed separately by tissue type (lung, liver, vertebrae). The ratios of plutonium activity (vertebrae:liver; liver:lung) were also analyzed in order to evaluate the importance of timing of exposure. Tissue data were available for 236 participants who lived in a total of 809 locations, of which 677 were verified postal addresses. Residents of Los Alamos were found to have higher plutonium activities in the lung than non-residents. Further, those who moved to Los Alamos before 1955 had higher lung activities than those who moved there later. These trends were not observed with the liver, vertebrae, or vertebrae:liver and liver:lung ratio data, however, and should be interpreted with caution. Although there are many limitations to this study, including the amount of available data and the analytical methods used to analyze the tissue, the overall results indicate that residence (defined as the year that the individual moved to Los Alamos) may have had a strong correlation to plutonium activity in human tissue. This study is the first to present the results of Los Alamos Autopsy Program in relation to residential status and location in Los Alamos.

  10. Stress analysis of mandibular implant-retained overdenture with independent attachment system: effect of restoration space and attachment height.

    PubMed

    Ebadian, Behnaz; Talebi, Saeid; Khodaeian, Niloufar; Farzin, Mahmoud

    2015-01-01

    In this in vitro study, 2 implants were embedded in the interforaminal region of an acrylic model. Two kinds of retention mechanisms were used to construct complete overdentures: ball type and direct abutment (Locator). The ball-type retention mechanism models included 3 different collar heights (1, 2, and 3 mm) with 15 mm occlusal plane height, and 3 different occlusal plane heights (9, 12, and 15 mm) with 1 mm collar height. The direct abutment models included 3 different occlusal plane heights (9, 12, and 15 mm) with 1 mm cuff height. Vertical unilateral and bilateral loads of 150 N were applied to the central fossa of the first molar. The stress of the bone around the implant was analyzed by finite element analysis. The results showed that by increasing vertical restorative space, the maximum stress values around implants were decreased in both unilateral and bilateral loading models. The results also showed that the increase in maximum stress values around implants correlated with the ball attachment collar height. The Locator attachment with a 1 mm cuff height and 9 mm occlusal plane height demonstrated 6.147 and 3.914 MPa in unilateral and bilateral loading conditions, respectively. While a reduction in the collar height of a ball-type retention mechanism and an increase in the vertical restorative space in direct abutment retention mechanisms are both biomechanically favorable, and may result in reduced stress in peri-implant bone, a ball attachment seems to be more favorable in the stress distribution around an implant than a Locator attachment.

  11. Independence.

    ERIC Educational Resources Information Center

    Stephenson, Margaret E.

    2000-01-01

    Discusses the four planes of development and the periods of creation and crystallization within each plane. Identifies the type of independence that should be achieved by the end of the first two planes of development. Maintains that it is through individual work on the environment that one achieves independence. (KB)

  12. An independent review and prioritization of past radionuclide and chemical releases from the Los Alamos National Laboratory--implications for future dose reconstruction studies.

    PubMed

    Le, Matthew H; Buddenbaum, John E; Burns, Robert E; Shonka, Joseph J; Gaffney, Shannon H; Donovan, Ellen P; Flack, Susan M; Widner, Thomas E

    2011-10-01

    From 1999 through 2010, a team of scientists and engineers systematically reviewed approximately eight million classified and unclassified documents at Los Alamos National Laboratory (LANL) that describe historical off-site releases of radionuclides and chemicals in order to determine the extent to which a full-scale dose reconstruction for releases is warranted and/or feasible. As a part of this effort, a relative ranking of historical airborne and waterborne radionuclide releases from LANL was established using priority index (PI) values that were calculated from estimated annual quantities released and the maximum allowable effluent concentrations according to The U.S. Nuclear Regulatory Commission (USNRC). Chemical releases were ranked based on annual usage estimates and U.S. Environmental Protection Agency (USEPA) toxicity values. PI results for airborne radionuclides indicate that early plutonium operations were of most concern between 1948 and 1961, in 1967, and again from 1970 through 1973. Airborne releases of uranium were found to be of most interest for 1968, from 1974 through 1978, and again in 1996. Mixed fission products yielded the highest PI value for 1969. Mixed activation product releases yielded the highest PI values from 1979 to 1995. For waterborne releases, results indicate that plutonium is of most concern for all years evaluated with the exception of 1956 when (90)Sr yielded the highest PI value. The prioritization of chemical releases indicate that four of the top five ranked chemicals were organic solvents that were commonly used in chemical processing and for cleaning. Trichloroethylene ranked highest, indicating highest relative potential for health effects, for both cancer and non-cancer effects. Documents also indicate that beryllium was used in significant quantities, which could have lead to residential exposures exceeding established environmental and occupational exposure limits, and warrants further consideration. In part because

  13. Stockpile Stewardship: Los Alamos

    SciTech Connect

    McMillan, Charlie; Morgan, Nathanial; Goorley, Tom; Merrill, Frank; Funk, Dave; Korzekwa, Deniece; Laintz, Ken

    2012-01-26

    "Heritage of Science" is a short video that highlights the Stockpile Stewardship program at Los Alamos National Laboratory. Stockpile Stewardship was conceived in the early 1990s as a national science-based program that could assure the safety, security, and effectiveness of the U.S. nuclear deterrent without the need for full-scale underground nuclear testing. This video was produced by Los Alamos National Laboratory for screening at the Lab's Bradbury Science Museum in Los Alamos, NM and is narrated by science correspondent Miles O'Brien.

  14. Stockpile Stewardship: Los Alamos

    ScienceCinema

    McMillan, Charlie; Morgan, Nathanial; Goorley, Tom; Merrill, Frank; Funk, Dave; Korzekwa, Deniece; Laintz, Ken

    2016-07-12

    "Heritage of Science" is a short video that highlights the Stockpile Stewardship program at Los Alamos National Laboratory. Stockpile Stewardship was conceived in the early 1990s as a national science-based program that could assure the safety, security, and effectiveness of the U.S. nuclear deterrent without the need for full-scale underground nuclear testing. This video was produced by Los Alamos National Laboratory for screening at the Lab's Bradbury Science Museum in Los Alamos, NM and is narrated by science correspondent Miles O'Brien.

  15. Los Alamos offers Fellowships

    NASA Astrophysics Data System (ADS)

    Los Alamos National Laboratory in New Mexico is calling for applications for postdoctoral appointments and research fellowships. The positions are available in geoscience as well as other scientific disciplines.The laboratory, which is operated by the University of California for the Department of Energy, awards J. Robert Oppenheimer Research Fellowships to scientists that either have or will soon complete doctoral degrees. The appointments are for two years, are renewable for a third year, and carry a stipend of $51,865 per year. Potential applicants should send a resume or employment application and a statement of research goals to Carol M. Rich, Div. 89, Human Resources Development Division, MS P290, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 by mid-November.

  16. The Los Alamos primer

    SciTech Connect

    Serber, R.

    1992-01-01

    This book contains the 1943 lecture notes of Robert Serber. Serber was a protege of J. Robert Oppenheimer and member of the team that built the first atomic bomb - reveal what the Los Alamos scientists knew, and did not know, about the terrifying weapon they were building.

  17. Nuclear Forensics at Los Alamos National Laboratory

    SciTech Connect

    Podlesak, David W; Steiner, Robert E.; Burns, Carol J.; LaMont, Stephen P.; Tandon, Lav

    2012-08-09

    The overview of this presentation is: (1) Introduction to nonproliferation efforts; (2) Scope of activities at Los Alamos National Laboratory; (3) Facilities for radioanalytical work at LANL; (4) Radiochemical characterization capabilities; and (5) Bulk chemical and materials analysis capabilities. Some conclusions are: (1) Analytical chemistry measurements on plutonium and uranium matrices are critical to numerous defense and non-defense programs including safeguards accountancy verification measurements; (2) Los Alamos National Laboratory operates capable actinide analytical chemistry and material science laboratories suitable for nuclear material forensic characterization; (3) Actinide analytical chemistry uses numerous means to validate and independently verify that measurement data quality objectives are met; and (4) Numerous LANL nuclear facilities support the nuclear material handling, preparation, and analysis capabilities necessary to evaluate samples containing nearly any mass of an actinide (attogram to kilogram levels).

  18. Los Alamos National Laboratory

    SciTech Connect

    Dogliani, Harold O

    2011-01-19

    The purpose of the briefing is to describe general laboratory technical capabilities to be used for various groups such as military cadets or university faculty/students and post docs to recruit into a variety of Los Alamos programs. Discussed are: (1) development and application of high leverage science to enable effeictive, predictable and reliability outcomes; (2) deter, detect, characterize, reverse and prevent the proliferation of weapons of mass destruction and their use by adversaries and terrorists; (3) modeling and simulation to define complex processes, predict outcomes, and develop effective prevention, response, and remediation strategies; (4) energetic materials and hydrodynamic testing to develop materials for precise delivery of focused energy; (5) materials cience focused on fundamental understanding of materials behaviors, their quantum-molecular properties, and their dynamic responses, and (6) bio-science to rapidly detect and characterize pathogens, to develop vaccines and prophylactic remedies, and to develop attribution forensics.

  19. [Height vertigo, fear of heights, acrophobia].

    PubMed

    Rennert, H

    1990-06-01

    Height vertigo (acrophobia) is a very frequent phenomenon being of interest for its physiological and psychological background, though usually only of limited significance in neuropsychiatry and otology. The different aspects as to its nature and origin are discussed. If acrophobia has developed into a conditioned reaction of avoidance with pressure of suffering, or acrophobia in persons, who have to work at heights, behavior therapeutic measures with systematic desensibilisation, starting from an imaginative training, are indicated.

  20. ASC platforms at Los Alamos.

    SciTech Connect

    Shaw, S. R.

    2004-01-01

    This talk describes the history, current state, and future plans for ASC computational and data storage service at Los Alamos. The of the systems and services described is limited to those installed in and managed by Group CCN-7.

  1. Los Alamos National Laboratory Overview

    SciTech Connect

    Neu, Mary

    2010-06-02

    Mary Neu, Associate Director for Chemistry, Life and Earth Sciences at Los Alamos National Laboratory, delivers opening remarks at the "Sequencing, Finishing, Analysis in the Future" meeting in Santa Fe, NM

  2. The genetic architecture of maize height.

    PubMed

    Peiffer, Jason A; Romay, Maria C; Gore, Michael A; Flint-Garcia, Sherry A; Zhang, Zhiwu; Millard, Mark J; Gardner, Candice A C; McMullen, Michael D; Holland, James B; Bradbury, Peter J; Buckler, Edward S

    2014-04-01

    Height is one of the most heritable and easily measured traits in maize (Zea mays L.). Given a pedigree or estimates of the genomic identity-by-state among related plants, height is also accurately predictable. But, mapping alleles explaining natural variation in maize height remains a formidable challenge. To address this challenge, we measured the plant height, ear height, flowering time, and node counts of plants grown in >64,500 plots across 13 environments. These plots contained >7300 inbreds representing most publically available maize inbreds in the United States and families of the maize Nested Association Mapping (NAM) panel. Joint-linkage mapping of quantitative trait loci (QTL), fine mapping in near isogenic lines (NILs), genome-wide association studies (GWAS), and genomic best linear unbiased prediction (GBLUP) were performed. The heritability of maize height was estimated to be >90%. Mapping NAM family-nested QTL revealed the largest explained 2.1 ± 0.9% of height variation. The effects of two tropical alleles at this QTL were independently validated by fine mapping in NIL families. Several significant associations found by GWAS colocalized with established height loci, including brassinosteroid-deficient dwarf1, dwarf plant1, and semi-dwarf2. GBLUP explained >80% of height variation in the panels and outperformed bootstrap aggregation of family-nested QTL models in evaluations of prediction accuracy. These results revealed maize height was under strong genetic control and had a highly polygenic genetic architecture. They also showed that multiple models of genetic architecture differing in polygenicity and effect sizes can plausibly explain a population's variation in maize height, but they may vary in predictive efficacy.

  3. Foraminal height measurement techniques

    PubMed Central

    Phan, Kevin; Rao, Prashanth J.

    2015-01-01

    Background One of the proposed advantages of anterior lumbar interbody fusion (ALIF) is restoration of disc height and hence an indirect foraminal height restoration. While this proposed advantage is often quoted in the literature, there are few robust studies demonstrating restoration of foraminal volume. Thus, this study aimed to review the literature and discuss the progression and development of foramen measurement techniques. Methods A review of the literature was performed to identify studies which reported foraminal height and dimensions following fusion surgery in cadaveric models or patients. Results Techniques in prior studies used to quantify foraminal dimensions before and after fusion operations include analysis from plain radiographs, computed tomography (CT) scans and magnetic resonance imaging (MRI) scans. Recent studies have attempted to standardize foraminal dimension measurements with the use of orthogonal software, accelerator-based measurements and the use of multiple images for three-dimensional reconstruction of the foramen volume. Conclusions Consistent results have demonstrated significant increases in foraminal area and height following anterior lumbar interbody distraction, providing evidence that ALIF can indirectly increase foraminal height. Future studies should use standardized measurement approaches such as the Pedicle-to-Pedicle technique with CT or MRI images to determine changes in foraminal dimensions.

  4. Foraminal height measurement techniques

    PubMed Central

    Phan, Kevin; Rao, Prashanth J.

    2015-01-01

    Background One of the proposed advantages of anterior lumbar interbody fusion (ALIF) is restoration of disc height and hence an indirect foraminal height restoration. While this proposed advantage is often quoted in the literature, there are few robust studies demonstrating restoration of foraminal volume. Thus, this study aimed to review the literature and discuss the progression and development of foramen measurement techniques. Methods A review of the literature was performed to identify studies which reported foraminal height and dimensions following fusion surgery in cadaveric models or patients. Results Techniques in prior studies used to quantify foraminal dimensions before and after fusion operations include analysis from plain radiographs, computed tomography (CT) scans and magnetic resonance imaging (MRI) scans. Recent studies have attempted to standardize foraminal dimension measurements with the use of orthogonal software, accelerator-based measurements and the use of multiple images for three-dimensional reconstruction of the foramen volume. Conclusions Consistent results have demonstrated significant increases in foraminal area and height following anterior lumbar interbody distraction, providing evidence that ALIF can indirectly increase foraminal height. Future studies should use standardized measurement approaches such as the Pedicle-to-Pedicle technique with CT or MRI images to determine changes in foraminal dimensions. PMID:27683677

  5. Height unification using GOCE

    NASA Astrophysics Data System (ADS)

    Rummel, R.

    2012-12-01

    With the gravity field and steady-state ocean circulation explorer (GOCE) (preferably combined with the gravity field and climate experiment (GRACE)) a new generation of geoid models will become available for use in height determination. These models will be globally consistent, accurate (<3 cm) and with a spatial resolution up to degree and order 200, when expressed in terms of a spherical harmonic expansion. GOCE is a mission of the European Space Agency (ESA). It is the first satellite equipped with a gravitational gradiometer, in the case of GOCE it measures the gradient components Vxx , Vyy, Vzzand Vxz. The GOCE gravitational sensor system comprises also a geodetic global positioning system (GPS)-receiver, three star sensors and ion-thrusters for drag compensation in flight direction. GOCE was launched in March 2009 and will fly till the end of 2013. Several gravity models have been derived from its data, their maximum degree is typically between 240 and 250. In summer 2012 a first re-processing of all level-1b data took place. One of the science objectives of GOCE is the unification of height systems. The existing height offsets among the datum zones can be determined by least-squares adjustment. This requires several precise geodetic reference points available in each height datum zone, physical heights from spirit levelling (plus gravimetry), the GOCE geoid and, in addition, short wavelength geoid refinement from terrestrial gravity anomalies. GOCE allows for important simplifications of the functional and stochastic part of the adjustment model. The future trend will be the direct determination of physical heights (orthometric as well as normal) from precise global navigation satellite system (GNSS)-positioning in combination with a next generation combined satellite-terrestrial high-resolution geoid model.

  6. Los Alamos Critical Assemblies Facility

    SciTech Connect

    Malenfant, R.E.

    1981-06-01

    The Critical Assemblies Facility of the Los Alamos National Laboratory has been in existence for thirty-five years. In that period, many thousands of measurements have been made on assemblies of /sup 235/U, /sup 233/U, and /sup 239/Pu in various configurations, including the nitrate, sulfate, fluoride, carbide, and oxide chemical compositions and the solid, liquid, and gaseous states. The present complex of eleven operating machines is described, and typical applications are presented.

  7. PULSE HEIGHT ANALYZER

    DOEpatents

    Goldsworthy, W.W.

    1958-06-01

    A differential pulse-height discriminator circuit is described which is readily adaptable for operation in a single-channel pulse-height analyzer. The novel aspect of the circuit lies in the specific arrangement of differential pulse-height discriminator which includes two pulse-height discriminators having a comnnon input and an anticoincidence circuit having two interconnected vacuum tubes with a common cathode resistor. Pulses from the output of one discriminator circuit are delayed and coupled to the grid of one of the anticoincidence tubes by a resistor. The output pulses from the other discriminator circuit are coupled through a cathode follower circuit, which has a cathode resistor of such value as to provide a long time constant with the interelectrode capacitance of the tube, to lenthen the output pulses. The pulses are then fed to the grid of the other anticoincidence tube. With such connections of the circuits, only when the incoming pulse has a pesk value between the operating levels of the two discriminators does an output pulse occur from the anticoincidence circuit.

  8. DIFFERENTIAL PULSE HEIGHT DISCRIMINATOR

    DOEpatents

    Test, L.D.

    1958-11-11

    Pulse-height discriminators are described, specifically a differential pulse-height discriminator which is adapted to respond to pulses of a band of amplitudes, but to reject pulses of amplitudes greater or less than tbe preselected band. In general, the discriminator includes a vacuum tube having a plurality of grids adapted to cut off plate current in the tube upon the application of sufficient negative voltage. One grid is held below cutoff, while a positive pulse proportional to the amplltude of each pulse is applled to this grid. Another grid has a negative pulse proportional to the amplitude of each pulse simultaneously applied to it. With this arrangement the tube will only pass pulses which are of sufficlent amplitude to counter the cutoff bias but not of sufficlent amplitude to cutoff the tube.

  9. Los Alamos Science: Number 16

    SciTech Connect

    Cooper, N.G.

    1988-01-01

    It was an unusually stimulating day and a half at Los Alamos when two Nobel Laureates in physiology, a leading paleontologist, and a leading bio-astrophysicist came together to discuss ''Unsolved Problems in the Science of Life,'' the topic of the second in a series of special meetings sponsored by the Fellows of the Laboratory. Just like the first one on ''Creativity in Science,'' this colloquium took us into a broader arena of ideas and viewpoints than is our usual daily fare. To contemplate the evolution and mysteries of intelligent life from the speakers' diverse points of view at one time, in one place was indeed a rare experience.

  10. Scaling New Heights

    ERIC Educational Resources Information Center

    Frey, Malia

    2009-01-01

    In this article, the author describes a rock climbing program at Minneapolis-based Courage Center, a rehabilitation and resource center that advances the lives of children and adults experiencing barriers to health and independence. Rock climbing offered participants a unique opportunity for both personal and physical development. The author…

  11. Los Alamos opacity web page

    SciTech Connect

    Magee, N.H. Jr.; Clark, R.E.H.

    1998-02-01

    The Los Alamos opacity data base is now available on the World Wide Web at http://t4.lanl.gov. The data base contains both the original Astrophysical Opacity Library distributed worldwide in the 1980`s (for historical reference) and the new improved opacities from the Light Element Detailed Configuration OPacity (LEDCOP) code. Users can access the opacity data using the multigroup opacity code TOPS to obtain Rosseland and Planck gray opacities, group mean opacities over selected energy ranges, the monochromatic absorption coefficients and the average ionization over a wide range of temperatures and densities. As described in this paper, these quantities are available for all of the elements presently on the data base and TOPS will provide the same quantities for any arbitrary mixture of these elements.

  12. Los Alamos PC estimating system

    SciTech Connect

    Stutz, R.A.; Lemon, G.D.

    1987-01-01

    The Los Alamos Cost Estimating System (QUEST) is being converted to run on IBM personal computers. This very extensive estimating system is capable of supporting cost estimators from many different and varied fields. QUEST does not dictate any fixed method for estimating. QUEST supports many styles and levels of detail estimating. QUEST can be used with or without data bases. This system allows the estimator to provide reports based on levels of detail defined by combining work breakdown structures. QUEST provides a set of tools for doing any type of estimate without forcing the estimator to use any given method. The level of detail in the estimate can be mixed based on the amount of information known about different parts of the project. The system can support many different data bases simultaneously. Estimators can modify any cost in any data base.

  13. Sri Lanka, Colored Height

    NASA Technical Reports Server (NTRS)

    2005-01-01

    The topography of the island nation of Sri Lanka is well shown in this color-coded shaded relief map generated with digital elevation data from the Shuttle Radar Topography Mission (SRTM).

    Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.

    For this special view heights below 10 meters (33 feet) above sea level have been colored red. These low coastal elevations extend 5 to 10 km (3.1 to 6.2 mi) inland on Sri Lanka and are especially vulnerable to flooding associated with storm surges, rising sea level, or, as in the aftermath of the earthquake of December 26, 2004, tsunami. These so-called tidal waves have occurred numerous times in history and can be especially destructive, but with the advent of the near-global SRTM elevation data planners can better predict which areas are in the most danger and help develop mitigation plans in the event of particular flood events.

    Sri Lanka is shaped like a giant teardrop falling from the southern tip of the vast Indian subcontinent. It is separated from India by the 50km (31mi) wide Palk Strait, although there is a series of stepping-stone coral islets known as Adam's Bridge that almost form a land bridge between the two countries. The island is just 350km (217mi) long and only 180km (112mi) wide at its broadest, and is about the same size as Ireland, West Virginia or Tasmania.

    The southern half of the island is dominated by beautiful and rugged hill country, and includes Mt Pidurutalagala, the islandaE(TM)s highest point at 2524 meters (8281 ft). The entire northern half comprises a large plain extending from the edge of

  14. PULSE HEIGHT ANALYZER

    DOEpatents

    Johnstone, C.W.

    1958-01-21

    An anticoincidence device is described for a pair of adjacent channels of a multi-channel pulse height analyzer for preventing the lower channel from generating a count pulse in response to an input pulse when the input pulse has sufficient magnitude to reach the upper level channel. The anticoincidence circuit comprises a window amplifier, upper and lower level discriminators, and a biased-off amplifier. The output of the window amplifier is coupled to the inputs of the discriminators, the output of the upper level discriminator is connected to the resistance end of a series R-C network, the output of the lower level discriminator is coupled to the capacitance end of the R-C network, and the grid of the biased-off amplifier is coupled to the junction of the R-C network. In operation each discriminator produces a negative pulse output when the input pulse traverses its voltage setting. As a result of the connections to the R-C network, a trigger pulse will be sent to the biased-off amplifier when the incoming pulse level is sufficient to trigger only the lower level discriminator.

  15. Root lengths of plants on Los Alamos National Laboratory lands

    SciTech Connect

    Tierney, G.D.; Foxx, T.S.

    1987-01-01

    Maximum root lengths of 22 plant species occurring on Los Alamos National Laboratory lands were measured. An average of two longest roots from each species were dug up and their lengths, typical shapes, and qualitative morphologics were noted along with the overstory dimensions of the plant individual with which the roots were associated. Maximum root lengths were compared with overstory (height times width) dimensions. Among the life forms studied, the shrubs tend to show the longest roots in relation to overstory size. Forbs show the shortest roots in relation to overstory size. Measurements of tree roots suggest only that immature trees on the Pajarito Plateau may have root-length to overstory-size ratios near one. 30 refs., 14 figs., 2 tabs.

  16. Frac height may increase away from well bore

    SciTech Connect

    Hunt, E. )

    1991-02-25

    Well logs with deep investigation capabilities are necessary to determine accurately the height of hydraulically produced fractures. Logs with shallow investigation capability will indicate the height of the fracture near the well bore, but as shown in a test in an East Texas well, fracture height in some formations can be substantially greater away from the well bore. In the East Texas test, six wire line surveys were run, including the usual gamma ray surveys. The fracture heights determined by the above logs are plotted. The independent estimates of gross fracture height varied considerably. Four logs, TWRL, VDL, SCAN, and CEL appear to be influenced by the fracture. Results were inconclusive from the Au and the CBL log. Analysis of each of these indicates a different minimum fracture height in this well.

  17. Vowel category dependence of the relationship between palate height, tongue height, and oral area.

    PubMed

    Hasegawa-Johnson, Mark; Pizza, Shamala; Alwan, Abeer; Cha, Jul Setsu; Haker, Katherine

    2003-06-01

    This article evaluates intertalker variance of oral area, logarithm of the oral area, tongue height, and formant frequencies as a function of vowel category. The data consist of coronal magnetic resonance imaging (MRI) sequences and acoustic recordings of 5 talkers, each producing 11 different vowels. Tongue height (left, right, and midsagittal), palate height, and oral area were measured in 3 coronal sections anterior to the oropharyngeal bend and were subjected to multivariate analysis of variance, variance ratio analysis, and regression analysis. The primary finding of this article is that oral area (between palate and tongue) showed less intertalker variance during production of vowels with an oral place of articulation (palatal and velar vowels) than during production of vowels with a uvular or pharyngeal place of articulation. Although oral area variance is place dependent, percentage variance (log area variance) is not place dependent. Midsagittal tongue height in the molar region was positively correlated with palate height during production of palatal vowels, but not during production of nonpalatal vowels. Taken together, these results suggest that small oral areas are characterized by relatively talker-independent vowel targets and that meeting these talker-independent targets is important enough that each talker adjusts his or her own tongue height to compensate for talker-dependent differences in constriction anatomy. Computer simulation results are presented to demonstrate that these results may be explained by an acoustic control strategy: When talkers with very different anatomical characteristics try to match talker-independent formant targets, the resulting area variances are minimized near the primary vocal tract constriction. PMID:14697000

  18. Sunset at the ALaMO

    NASA Video Gallery

    A new color all-sky camera has opened its eyes at the ALaMO, or Automated Lunar and Meteor Observatory, at NASA's Marshall Space Flight Center in Huntsville, Ala. Watch its inaugural video below, s...

  19. Publications of Los Alamos research 1988

    SciTech Connect

    Varjabedian, K.; Dussart, S.A.; McClary, W.J.; Rich, J.A.

    1989-12-01

    This bibliography lists unclassified publications of work done at the Los Alamos National Laboratory for 1988. The entries, which are subdivided by broad subject categories, are cross-referenced with an author index and a numeric index.

  20. New Rad Lab for Los Alamos

    SciTech Connect

    2008-08-06

    The topping out ceremony for a key construction stage in the Los Alamos National Laboratory's newest facility, the Radiological Laboratory Utility & Office Building. This is part of the National Nu...  

  1. Environmental surveillance at Los Alamos during 1994

    SciTech Connect

    1996-07-01

    This report describes environmental monitoring activities at Los Alamos National Laboratory for 1994. Data were collected to assess external penetrating radiation, airborne emissions, liquid effluents, radioactivity of environmental materials and food stuffs, and environmental compliance.

  2. New Rad Lab for Los Alamos

    ScienceCinema

    None

    2016-07-12

    The topping out ceremony for a key construction stage in the Los Alamos National Laboratory's newest facility, the Radiological Laboratory Utility & Office Building. This is part of the National Nu...  

  3. Edward Teller Returns to LOS Alamos

    NASA Astrophysics Data System (ADS)

    Hecker, Siegfried S.

    2010-01-01

    I was asked to share some reflections of Edward Teller's return to Los Alamos during my directorship. I met Teller late in his life. My comments focus on that time and they will be mostly in the form of stories of my interactions and those of my colleagues with Teller. Although the focus of this symposium is on Teller's contributions to science, at Los Alamos it was never possible to separate Teller's science from policy and controversy ...

  4. Internship at Los Alamos National Laboratory

    SciTech Connect

    Dunham, Ryan Q.

    2012-07-11

    Los Alamos National Laboratory (LANL) is located in Los Alamos, New Mexico. It provides support for our country's nuclear weapon stockpile as well as many other scientific research projects. I am an Undergraduate Student Intern in the Systems Design and Analysis group within the Nuclear Nonproliferation division of the Global Security directorate at LANL. I have been tasked with data analysis and modeling of particles in a fluidized bed system for the capture of carbon dioxide from power plant flue gas.

  5. Los Alamos Space Weather Summer School

    NASA Astrophysics Data System (ADS)

    Koller, J.

    2011-12-01

    Los Alamos National Lab recently initiated a new summer school specializing on space science, space weather, and instrumentation. The school is geared towards graduate level students and has been established to bring graduate students together with internationally recognized scientists at the Los Alamos National Lab. Students are receiving a prestigious Vela Fellowship to cover relocation expenses and cost of living for the duration of their stay in Los Alamos. For two months students have the opportunity to attend science lectures given by distinguished researchers at LANL. Topics are related to space weather research including plasma physics, radiation belts, numerical modeling, solar wind physics, spacecraft charging, and instrumentation. Students are also working closely with a Los Alamos mentor on exciting space weather science topics with access to Los Alamos GPS and geosynchronous data. The summer school concludes with project presentations by the students in a technical forum. The program is designed for graduate students currently enrolled at US Universities and open to all nationalities. We are presenting an overview of this exciting new program funded by IGPP (Institute of Geophysics and Planetary Physics), the Global Security Directorate, and the Directorate for Science, Technology and Engineering at Los Alamos National Lab.

  6. Los Alamos Laser Eye Investigation.

    SciTech Connect

    Odom, C. R.

    2005-01-01

    A student working in a laser laboratory at Los Alamos National Laboratory sustained a serious retinal injury to her left eye when she attempted to view suspended particles in a partially evacuated target chamber. The principle investigator was using the white light from the flash lamp of a Class 4 Nd:YAG laser to illuminate the particles. Since the Q-switch was thought to be disabled at the time of the accident, the principal investigator assumed it would be safe to view the particles without wearing laser eye protection. The Laboratory Director appointed a team to investigate the accident and to report back to him the events and conditions leading up to the accident, equipment malfunctions, safety management causal factors, supervisory and management action/inaction, adequacy of institutional processes and procedures, emergency and notification response, effectiveness of corrective actions and lessons learned from previous similar events, and recommendations for human and institutional safety improvements. The team interviewed personnel, reviewed documents, and characterized systems and conditions in the laser laboratory during an intense six week investigation. The team determined that the direct and primary failures leading to this accident were, respectively, the principle investigator's unsafe work practices and the institution's inadequate monitoring of worker performance. This paper describes the details of the investigation, the human and institutional failures, and the recommendations for improving the laser safety program.

  7. Unified height systems after GOCE

    NASA Astrophysics Data System (ADS)

    Rummel, Reiner; Gruber, Thomas; Sideris, Michael; Rangelova, Elena; Woodworth, Phil; Hughes, Chris; Ihde, Johannes; Liebsch, Gunter; Rülke, Axel; Gerlach, Christian; Haagmans, Roger

    2015-04-01

    The objectives of global height unification are twofold, (1) the realization of accurate geopotential numbers C together with their standard deviation σ(C) at a selected set of stations (datum points of national height systems, geodetic fundamental stations (IERS), primary tide gauges (PSMSL) and primary reference clocks (IERS)) and (2) the determination of height off-sets between all existing regional/national height systems and one global height reference. In the future the primary method of height determination will be GPS-levelling with very stringent requirements concerning the consistency of the positioning and the gravity potential difference part. Consistency is required in terms of the applied standards (ITRF, zero tide system, geodetic reference system). Geopotential differences will be based on a next generation geopotential model combining GOCE and GRACE and a best possible collection of global terrestrial and altimetric gravity and topographic data. Ultimately, the envisaged accuracy of height unification is about 10 cm2/s2 (or 1cm). At the moment, in well surveyed regions, an accuracy of about 40 to 60 cm2/s2 (or 4 to 6cm) is attainable. Objective One can be realized by straight forward computation of geopotential numbers C, i.e. geopotential differences relative to an adopted height reference. No adjustment is required for this. Objective Two, the unification of existing height systems is achieved by employing a least-squares adjustment based on the GBVP-approach. In order to attain a non-singular solution, this requires for each included datum zone at least one geo-referenced station per zone, i.e. its ellipsoidal height h and, in addition, the corresponding physical height H (geopotential number, normal height, orthometric height, etc.). Changes in geopotential numbers of consecutive realizations reflect (1) temporal changes of station heights, (2) improvements or changes of the applied geopotential (or geoid) model and (3) improvements of the

  8. Fluctuations in Schottky barrier heights

    NASA Astrophysics Data System (ADS)

    Mahan, G. D.

    1984-02-01

    A double Schottky barrier is often formed at the grain boundary in polycrystalline semiconductors. The barrier height is shown to fluctuate in value due to the random nature of the impurity positions. The magnitude of the fluctuations is 0.1 eV, and the fluctuations cause the barrier height measured by capacitance to differ from the one measured by electrical conductivity.

  9. Hydrologic transport of depleted uranium associated with open air dynamic range testing at Los Alamos National Laboratory, New Mexico, and Eglin Air Force Base, Florida

    SciTech Connect

    Becker, N.M.; Vanta, E.B.

    1995-05-01

    Hydrologic investigations on depleted uranium fate and transport associated with dynamic testing activities were instituted in the 1980`s at Los Alamos National Laboratory and Eglin Air Force Base. At Los Alamos, extensive field watershed investigations of soil, sediment, and especially runoff water were conducted. Eglin conducted field investigations and runoff studies similar to those at Los Alamos at former and active test ranges. Laboratory experiments complemented the field investigations at both installations. Mass balance calculations were performed to quantify the mass of expended uranium which had transported away from firing sites. At Los Alamos, it is estimated that more than 90 percent of the uranium still remains in close proximity to firing sites, which has been corroborated by independent calculations. At Eglin, we estimate that 90 to 95 percent of the uranium remains at test ranges. These data demonstrate that uranium moves slowly via surface water, in both semi-arid (Los Alamos) and humid (Eglin) environments.

  10. Status of Monte Carlo at Los Alamos

    SciTech Connect

    Thompson, W.L.; Cashwell, E.D.

    1980-01-01

    At Los Alamos the early work of Fermi, von Neumann, and Ulam has been developed and supplemented by many followers, notably Cashwell and Everett, and the main product today is the continuous-energy, general-purpose, generalized-geometry, time-dependent, coupled neutron-photon transport code called MCNP. The Los Alamos Monte Carlo research and development effort is concentrated in Group X-6. MCNP treats an arbitrary three-dimensional configuration of arbitrary materials in geometric cells bounded by first- and second-degree surfaces and some fourth-degree surfaces (elliptical tori). Monte Carlo has evolved into perhaps the main method for radiation transport calculations at Los Alamos. MCNP is used in every technical division at the Laboratory by over 130 users about 600 times a month accounting for nearly 200 hours of CDC-7600 time.

  11. New Generation of Los Alamos Opacity Tables

    NASA Astrophysics Data System (ADS)

    Colgan, James; Kilcrease, D. P.; Magee, N. H.; Sherrill, M. E.; Abdallah, J.; Hakel, P.; Fontes, C. J.; Guzik, J. A.; Mussack, K. A.

    2016-05-01

    We present a new generation of Los Alamos OPLIB opacity tables that have been computed using the ATOMIC code. Our tables have been calculated for all 30 elements from hydrogen through zinc and are publicly available through our website. In this poster we discuss the details of the calculations that underpin the new opacity tables. We also show several recent applications of the use of our opacity tables to solar modeling and other astrophysical applications. In particular, we demonstrate that use of the new opacities improves the agreement between solar models and helioseismology, but does not fully resolve the long-standing `solar abundance' problem. The Los Alamos National Laboratory is operated by Los Alamos National Security, LLC for the National Nuclear Security Administration of the U.S. Department of Energy under Contract No. DE-AC5206NA25396.

  12. Publications of Los Alamos Research, 1983

    SciTech Connect

    Sheridan, C.J.; McClary, W.J.; Rich, J.A.; Rodriguez, L.L.

    1984-10-01

    This bibliography is a compilation of unclassified publications of work done at the Los Alamos National Laboratory for 1983. Papers published in 1982 are included regardless of when they were actually written. Publications received too late for inclusion in earlier compilations have also been listed. Declassification of previously classified reports is considered to constitute publication. All classified issuances are omitted - even those papers, themselves unclassified, which were published only as part of a classified document. If a paper was published more than once, all places of publication are included. The bibliography includes Los Alamos National Laboratory reports, papers released as non-Laboratory reports, journal articles, books, chapters of books, conference papers either published separately or as part of conference proceedings issued as books or reports, papers publishd in congressional hearings, theses, and US patents. Publications by Los Alamos authors that are not records of Laboratory-sponsored work are included when the Library becomes aware of them.

  13. Publications of Los Alamos research 1980

    SciTech Connect

    Salazar, C.A.; Willis, J.K.

    1981-09-01

    This bibliography is a compilation of unclassified publications of work done at the Los Alamos National Laboratory for 1980. Papers published in 1980 are included regardless of when they were actually written. Publications received too late for inclusion in earlier compilations have also been listed. Declassification of previously classified reports is considered to constitute publication. All classified issuances are omitted-even those papers, themselves unclassified, which were published only as part of a classified document. If a paper was pubished more than once, all places of publication are included. The bibliography includes Los Alamos National Laboratory reports, papers released as non-laboratory reports, journal articles, books, chapters of books, conference papers published either separately or as part of conference proceedings issued as books or reports, papers published in congressional hearings, theses, and US patents. Publications by Los Alamos authors that are not records of Laboratory-sponsored work are included when the Library becomes aware of them.

  14. SEDs at Los Alamos: A Personal Memoir

    NASA Astrophysics Data System (ADS)

    Bederson, Benjamin

    2001-03-01

    I have written this personal memoir approximately 55 years after the events I describe. It is based almost exclusively on memory, since apart from the diary I kept while on Tinian, I have few documents concerning it. It covers my service in the U.S. Army's Special Engineering Detachment (SED) in Oak Ridge and Los Alamos in 1944-45, on Tinian island, the launching pad for the bombing raids on Japan, in the summer and fall of 1945, and my return to Los Alamos until my discharge in January 1946.

  15. Olive School, Arlington Heights, Illinois

    ERIC Educational Resources Information Center

    Rausch, Kathy

    1974-01-01

    Article stressed the need for a music teacher in an open school to have an openness to people and ideas. It also described the educational objectives at the Olive School in Arlington Heights, Illinois. (Author/RK)

  16. Taking America To New Heights

    NASA Video Gallery

    NASA's Commercial Crew Program (CCP) is taking America to new heights with its Commercial Crew Development Round 2 (CCDev2) partners. In 2011, NASA entered into funded Space Act Agreements (SAAs) w...

  17. Epigenetic heredity of human height.

    PubMed

    Simeone, Pasquale; Alberti, Saverio

    2014-06-01

    Genome-wide SNP analyses have identified genomic variants associated with adult human height. However, these only explain a fraction of human height variation, suggesting that significant information might have been systematically missed by SNP sequencing analysis. A candidate for such non-SNP-linked information is DNA methylation. Regulation by DNA methylation requires the presence of CpG islands in the promoter region of candidate genes. Seventy two of 87 (82.8%), height-associated genes were indeed found to contain CpG islands upstream of the transcription start site (USC CpG island searcher; validation: UCSC Genome Browser), which were shown to correlate with gene regulation. Consistent with this, DNA hypermethylation modules were detected in 42 height-associated genes, versus 1.5% of control genes (P = 8.0199e(-17)), as were dynamic methylation changes and gene imprinting. Epigenetic heredity thus appears to be a determinant of adult human height. Major findings in mouse models and in human genetic diseases support this model. Modulation of DNA methylation are candidate to mediate environmental influence on epigenetic traits. This may help to explain progressive height changes over multiple generations, through trans-generational heredity of progressive DNA methylation patterns.

  18. Precision measurement of disc height, vertebral height and sagittal plane displacement from lateral radiographic views of the lumbar spine.

    PubMed

    Frobin, W.; Brinckmann, P.; Biggemann, M.; Tillotson, M.; Burton, K.

    1997-01-01

    OBJECTIVE.: To compile a database of disc height, vertebral height and sagittal plane displacement from lateral radiographic views of the lumbar spine, valid for male and female subjects in the age range 16-57 years. The protocols used to measure these parameters compensate for distortion in central projection, off-centre position, axial rotation and lateral tilt of the spine as well as for variation in radiographic magnification and stature. STUDY DESIGN.: The study comprised designing and testing of measurement protocols, together with subsequent data collection from archive radiographs. BACKGROUND.: Attempts to quantify primary mechanical damage to lumbar vertebrae and discs have been limited due to imprecision when measuring disc height, vertebral height and sagittal plane displacement. Age-related, normative values for these parameters were not previously available. Consequently, important issues like the effectiveness of past and present guidelines for safe manual handling with respect to prevention of overload injuries could not be resolved and judgement on pathological alterations in the morphology of the individual lumbar spine could only be performed in a qualitative, subjective manner. METHODS.: Based on the analysis of vertebral contours in the lateral radiographic image of the lumbar spine, new protocols for measuring disc height, vertebral height and sagittal plane displacement were developed. The measured data are virtually independent of distortion, axial rotation and lateral tilt. Furthermore, description of height and displacement using dimensionless parameters guarantees independence of radiographic magnification and stature. Subjective influence in the measurement procedure was minimized by automatic computation of contour-landmarks and derived parameters. Measurement errors were assessed from sets of radiographs of spine specimens and serial flexion-extension radiographs; interobserver and intraobserver errors were assessed from repeated

  19. Independence Is.

    ERIC Educational Resources Information Center

    Stickney, Sharon

    This workbook is designed to help participants of the Independence Training Program (ITP) to achieve a definition of "independence." The program was developed for teenage girls. The process for developing the concept of independence consists of four steps. Step one instructs the participant to create an imaginary situation where she is completely…

  20. Induction inserts at the Los Alamos PSR

    SciTech Connect

    King-Yuen Ng

    2002-09-30

    Ferrite-loaded induction tuners installed in the Los Alamos Proton Storage Ring have been successful in compensating space-charge effects. However, the resistive part of the ferrite introduces unacceptable microwave instability and severe bunch lengthening. An effective cure was found by heating the ferrite cores up to {approx} 130 C. An understanding of the instability and cure is presented.

  1. Los Alamos waste drum shufflers users manual

    SciTech Connect

    Rinard, P.M.; Adams, E.L.; Painter, J.

    1993-08-24

    This user manual describes the Los Alamos waste drum shufflers. The primary purpose of the instruments is to assay the mass of {sup 235}U (or other fissile materials) in drums of assorted waste. It can perform passive assays for isotopes that spontaneously emit neutrons or active assays using the shuffler technique as described on this manual.

  2. Proceedings of the Los Alamos neutrino workshop

    SciTech Connect

    Boehm, F.; Stephenson, G.J. Jr.

    1982-08-01

    A workshop on neutrino physics was held at Los Alamos from June 8 to 12, 1981. The material presented has been provided in part by the organizers, in part by the chairmen of the working sessions. Closing date for contributions was October 1981.

  3. Los Alamos Fires From Landsat 7

    NASA Technical Reports Server (NTRS)

    2002-01-01

    On May 9, 2000, the Landsat 7 satellite acquired an image of the area around Los Alamos, New Mexico. The Landsat 7 satellite acquired this image from 427 miles in space through its sensor called the Enhanced Thematic Mapper Plus (ETM+). Evident within the imagery is a view of the ongoing Cerro Grande fire near the town of Los Alamos and the Los Alamos National Laboratory. Combining the high-resolution (30 meters per pixel in this scene) imaging capacity of ETM+ with its multi-spectral capabilities allows scientists to penetrate the smoke plume and see the structure of the fire on the surface. Notice the high-level of detail in the infrared image (bottom), in which burn scars are clearly distinguished from the hotter smoldering and flaming parts of the fire. Within this image pair several features are clearly visible, including the Cerro Grande fire and smoke plume, the town of Los Alamos, the Los Alamos National Laboratory and associated property, and Cerro Grande peak. Combining ETM+ channels 7, 4, and 2 (one visible and two infrared channels) results in a false color image where vegetation appears as bright to dark green (bottom image). Forested areas are generally dark green while herbaceous vegetation is light green. Rangeland or more open areas appear pink to light purple. Areas with extensive pavement or urban development appear light blue or white to purple. Less densely-developed residential areas appear light green and golf courses are very bright green. The areas recently burned appear black. Dark red to bright red patches, or linear features within the burned area, are the hottest and possibly actively burning areas of the fire. The fire is spreading downslope and the front of the fire is readily detectable about 2 kilometers to the west and south of Los Alamos. Combining ETM+ channels 3, 2, and 1 provides a true-color image of the greater Los Alamos region (top image). Vegetation is generally dark to medium green. Forested areas are very dark green

  4. The height premium in Indonesia.

    PubMed

    Sohn, Kitae

    2015-01-01

    Analyzing the Indonesian Family Life Survey for the year 2007, this paper estimates that a 10 cm increase in physical stature is associated with an increase in earnings of 7.5% for men and 13.0% for women, even after controlling for an extensive set of productivity variables. When the height premium is estimated by sector, it is 12.3% for self-employed men and 18.0% for self-employed women; a height premium of 11.1% is also estimated for women in the private sector. In the public sector, however, the height premium estimate is not statistically significant for either men or women. This paper provides further evidence of discrimination based on customers' preferences for tall workers.

  5. Tree Height Calculator: An Android App for Estimating Tree Height

    NASA Astrophysics Data System (ADS)

    Burca, V. S.; Htet, N. M.; Huang, X.; de Lanerolle, T. R.; Morelli, R.; Gourley, J. R.

    2011-12-01

    Conventionally, measuring tree height requires a collection of different tools - clinometer, transit, pencil, paper, laptop computer. Results are recorded manually and entered into a spreadsheet or database for future calculation and analysis. Tree Height Calculator is a mobile Android app the integrates the various steps in this process thereby improving the accuracy and dramatically reducing the time required to go from taking measurements to analyzing data. Given the user's height and the distance from the base of the tree (which can be downloaded into the app from a server), the app uses the phone's orientation sensor to calculate the angle of elevation. A simple trigonometric formula is then used to calculate and record the tree's height in the phone's database. When the phone has a WiFi connection, the data are transmitted to a server, from where they can be downloaded directly into a spreadsheet. The application was first tested in an Environmental Science laboratory at Trinity College. On the first trial, 103 data samples were collected, stored, and uploaded to the online database with only couple of dropped data points. On the second trial, 98 data samples were gathered with no loss of data. The app combined the individual measurements taken by the students in the lab, reducing the time required to produce a graph of the class's results from days to hours.

  6. Are Independent Probes Truly Independent?

    ERIC Educational Resources Information Center

    Camp, Gino; Pecher, Diane; Schmidt, Henk G.; Zeelenberg, Rene

    2009-01-01

    The independent cue technique has been developed to test traditional interference theories against inhibition theories of forgetting. In the present study, the authors tested the critical criterion for the independence of independent cues: Studied cues not presented during test (and unrelated to test cues) should not contribute to the retrieval…

  7. Fear of heights in infants?

    PubMed Central

    Adolph, Karen E.; Kretch, Kari S.; LoBue, Vanessa

    2014-01-01

    Based largely on the famous “visual cliff” paradigm, conventional wisdom is that crawling infants avoid crossing the brink of a dangerous drop-off because they are afraid of heights. However, recent research suggests that the conventional wisdom is wrong. Avoidance and fear are conflated, and there is no compelling evidence to support fear of heights in human infants. Infants avoid crawling or walking over an impossibly high drop-off because they perceive affordances for locomotion—the relations between their own bodies and skills and the relevant properties of the environment that make an action such as descent possible or impossible. PMID:25267874

  8. Child and adolescent labor, socioeconomic status, and reduced adult height.

    PubMed

    Dantas, Rosa Amélia; Santana, Vilma Sousa

    2010-01-01

    This population-based cross-sectional study of 3262 individuals aged 18 to 65 years from Aracaju, Brazil investigates the effects of child/adolescent labor (CAL) experience on adult height, considering gender, socioeconomic status (SES), and skin color. We hypothesized that the younger children are at their first job, the greater the negative effects will be on their later growth as adults. Child/adolescent laborers reported having paid jobs before 14 years of age. Among males in the low and medium SES strata, CAL experience was negatively associated with adult height independent of skin color; among females, this inverse association was observed for those in the low and high SES strata. Among males in the low and medium SES strata, there was a linear inverse relation between age at first job and adult height. CAL could reduce height in adulthood, suggesting a need for programs that reduce the impact of CAL on future physical development.

  9. Sea Surface Height 1993 - 2011

    NASA Video Gallery

    This animation depicts year-to-year variability in sea surface height, and chronicles two decades of El Niño and La Niña events. It was created using NASA ocean altimetry data from 1993 to 2011, ...

  10. Water Supply at Los Alamos during 1997

    SciTech Connect

    M. N. Maes; S. G. McLin; W. D. Purtymun

    1998-12-01

    Production of potable municipal water supplies during 1997 totaled about 1,285.9 million gallons from wells in the Guaje, Pajarito, and Otowi well fields. There was no water used from the spring gallery in Water Canyon or from Guaje Reservoir during 1997. About 2.4 million gallons of water from Los Alamos Reservoir was used to irrigate public parks and recreational lands. The total water usage in 1997 was about 1,288.3 million gallons, or about 135 gallons per day per person living in Los Alamos County. Groundwater pumpage was down about 82.2 million gallons in 1997 compared with the pumpage in 1996. Four new replacement wells were drilled and cased in Guaje Canyon between October 1997 and March 1998. These wells are currently being developed and aquifer tests are being performed. A special report summarizing the geological, geophysical, and well construction logs will be issued in the near future for these new wells.

  11. Los Alamos Team Demonstrates Bottle Scanner Technology

    ScienceCinema

    Espy, Michelle; Schultz, Larry

    2016-07-12

    Los Alamos scientists are demonstrating a Nuclear Magnetic Resonance Imaging (NMR) technology that may provide a breakthrough for screening liquids at airport security. By adding low-power X-ray data to the NMR mix, scientists believe they have unlocked a new detection technology. Funded in part by the Department of Homeland Security's Science and Technology Directorate, the new technology is called MagRay.

  12. Status of the Los Alamos Anger camera

    SciTech Connect

    Seeger, P.A.; Nutter, M.J.

    1985-01-01

    Results of preliminary tests of the neutron Anger camera being developed at Los Alamos are presented. This detector uses a unique encoding scheme involving parellel processing of multiple receptive fields. Design goals have not yet been met, but the results are very encouraging and improvements in the test procedures are expected to show that the detector will be ready for use on a small-angle scattering instrument next year. 3 refs., 4 figs.

  13. Los Alamos synchronous orbit data set

    SciTech Connect

    Baker, D.N.; Higbie, P.R.; Belian, R.D.; Hones, E.W.; Klebesadel, R.W.

    1981-01-01

    Energetic electron (30-15000 keV) and proton 145 keV to 150 MeV) measurements made by Los Alamos National Laboratory sensors at geostationary orbit (6.6 R/sub E/) are summarized. The instrumentation employed and the satellite positions are described. The spacecraft have been variously located, but in their present configuration the Los Alamos satellites designated 1976-059, 1977-007, and 1979-053 are located, respectively, at approx. 70/sup 0/W, approx. 70/sup 0/E, and approx. 135/sup 0/W longitude. Several examples of the high temporal and full three-dimensional spatial measurement capabilities of these instruments are illustrated by examples from the published literature. Discussion is also given for the Los Alamos Synoptic Data Set (SDS) which gives a broad overview of the Los Alamos geostationary orbit measurements. The SDS data are plotted in terms of daily average spectra, 3-hour local time averages, and in a variety of statistical formats. The data summarize conditions from mid-1976 through 1978 (S/C 1976-059) and from early 1977 through 1978 (S/C 1977-007). The SDS compilations presented correspond to measurements at 35/sup 0/W, 70/sup 0/W, and 135/sup 0/W geographic longitude and thus are indicative of conditions at 9/sup 0/, 11/sup 0/, and 4.8/sup 0/ geomagnetic latitude, respectively. The bulk of the SDS report presents data plots which are organized according to Carrington solar rotations and, as such, the data are readily comparable to solar rotation-dependent interplanetary conditions. Potential applications of the Synoptic Data Set (available to all interested users in June 1981) are discussed.

  14. Amphibians and Reptiles of Los Alamos County

    SciTech Connect

    Teralene S. Foxx; Timothy K. Haarmann; David C. Keller

    1999-10-01

    Recent studies have shown that amphibians and reptiles are good indicators of environmental health. They live in terrestrial and aquatic environments and are often the first animals to be affected by environmental change. This publication provides baseline information about amphibians and reptiles that are present on the Pajarito Plateau. Ten years of data collection and observations by researchers at Los Alamos National Laboratory, the University of New Mexico, the New Mexico Department of Game and Fish, and hobbyists are represented.

  15. Los Alamos Team Demonstrates Bottle Scanner Technology

    SciTech Connect

    Espy, Michelle; Schultz, Larry

    2014-05-06

    Los Alamos scientists are demonstrating a Nuclear Magnetic Resonance Imaging (NMR) technology that may provide a breakthrough for screening liquids at airport security. By adding low-power X-ray data to the NMR mix, scientists believe they have unlocked a new detection technology. Funded in part by the Department of Homeland Security's Science and Technology Directorate, the new technology is called MagRay.

  16. The Los Alamos accelerator code group

    SciTech Connect

    Krawczyk, F.L.; Billen, J.H.; Ryne, R.D.; Takeda, Harunori; Young, L.M.

    1995-05-01

    The Los Alamos Accelerator Code Group (LAACG) is a national resource for members of the accelerator community who use and/or develop software for the design and analysis of particle accelerators, beam transport systems, light sources, storage rings, and components of these systems. Below the authors describe the LAACG`s activities in high performance computing, maintenance and enhancement of POISSON/SUPERFISH and related codes and the dissemination of information on the INTERNET.

  17. Los Alamos Novel Rocket Design Flight Tested

    SciTech Connect

    Tappan, Bryce

    2014-10-23

    Los Alamos National Laboratory scientists recently flight tested a new rocket design that includes a high-energy fuel and a motor design that also delivers a high degree of safety. Researchers will now work to scale-up the design, as well as explore miniaturization of the system, in order to exploit all potential applications that would require high-energy, high-velocity, and correspondingly high safety margins.

  18. Los Alamos Novel Rocket Design Flight Tested

    ScienceCinema

    Tappan, Bryce

    2016-07-12

    Los Alamos National Laboratory scientists recently flight tested a new rocket design that includes a high-energy fuel and a motor design that also delivers a high degree of safety. Researchers will now work to scale-up the design, as well as explore miniaturization of the system, in order to exploit all potential applications that would require high-energy, high-velocity, and correspondingly high safety margins.

  19. Los Alamos National Laboratory Facility Review

    SciTech Connect

    Nelson, Ronald Owen

    2015-06-05

    This series of slides depicts the Los Alamos Neutron Science Center (LANSCE). The Center's 800-MeV linac produces H+ and H- beams as well as beams of moderated (cold to 1 MeV) and unmoderated (0.1 to 600 MeV) neutrons. Experimental facilities and their capabilities and characteristics are outlined. Among these are LENZ, SPIDER, and DANCE.

  20. Factors affecting radionuclide availability to vegetables grown at Los Alamos

    SciTech Connect

    White, G.C.; Hakonson, T.E.; Ahlquist, A.J.

    1981-07-01

    A field study was conducted in 1977 on /sup 238/ /sup 239/Pu and /sup 137/Cs availability to zucchini squash (Curcurbita melopepo, hybrid seneca) and green bush beans (Phaseolus vulgaris, Landreths stringless) grown under home-garden conditions in an area at Los Alamos National Laboratory used for treated radioactive liquid waste disposal. Radionuclide concentrations were measured as a function of tissue type, height above the soil, fertilization regime, and for the squash, food-cleansing procedures. Analysis of variance procedures was used to analyze the data. Ratios of the concentration of a radionuclide in oven-dried vegetation to dry soil ranged from 0.0004 to 0.116 for the Pu isotopes, and from 0.051 to 0.255 for /sup 137/Cs. Fertilization with cattle manure reduced the Pu concentration ratios by 30% and /sup 137/Cs by 50%. Vegetative parts sampled within 20 cm of the ground surface were contaminated about four times as much as those parts growing further from the ground surface. About 65% of the contamination was removed by washing, indicating the presence of surficial contamination. The 50-year radiation dose commitment to humans consuming vegetables from the garden plot would be less than 0.05 mrem and would be due almost entirely to /sup 137/Cs.

  1. Critical partnerships: Los Alamos, universities, and industry

    SciTech Connect

    Berger, C.L.

    1997-04-01

    Los Alamos National Laboratory, situated 35 miles northwest of Santa Fe, NM, is one of the Department of Energy`s three Defense Programs laboratories. It encompasses 43 square miles, employees approximately 10,000 people, and has a budget of approximately $1.1B in FY97. Los Alamos has a strong post-cold war mission, that of reducing the nuclear danger. But even with that key role in maintaining the nation`s security, Los Alamos views partnerships with universities and industry as critical to its future well being. Why is that? As the federal budget for R&D comes under continued scrutiny and certain reduction, we believe that the triad of science and technology contributors to the national system of R&D must rely on and leverage each others capabilities. For us this means that we will rely on these partners to help us in 5 key ways: We expect that partnerships will help us maintain and enhance our core competencies. In doing so, we will be able to attract the best scientists and engineers. To keep on the cutting edge of research and development, we have found that partnerships maintain the excellence of staff through new and exciting challenges. Additionally, we find that from our university and corporate partners we often learn and incorporate {open_quotes}best practices{close_quotes} in organizational management and operations. Finally, we believe that a strong national system of R&D will ensure and enhance our ability to generate revenues.

  2. Exploration geochemistry: The Los Alamos experience

    SciTech Connect

    Maassen, L.W.; Bolivar, S.L.

    1989-01-01

    Los Alamos National Laboratory became actively involved in geochemical exploration in 1975 by conducting a reconnaissance-scale exploration program for uranium as part of the National Uranium Resource Evaluation program. Initially, only uranium and thorium were analyzed. By 1979 Los Alamos was analyzing a multielement suite. The data were presented in histograms and as black and white concentration plots for uranium and thorium only. Data for the remaining elements were presented as hard copy data listings in an appendix to the report. In 1983 Los Alamos began using exploration geochemistry for the purpose of finding economic mineral deposits to help stimulate the economies of underdeveloped countries. Stream-sediment samples were collected on the Caribbean island of St. Lucia and a geochemical atlas of that island was produced. The data were statistically smoothed and presented as computer-generated color plots of each element of the multielement suite. Studies for the US Bureau of Land Management in 1984 consisted of development of techniques for the integration of several large data sets, which could then be used for computer-assisted mineral resource assessments. A supervised classification technique was developed which compares the attributes of grid cells containing mines or mineral occurrences with attributes of unclassified cells not known to contain mines or occurrences. Color maps indicate how closely unclassified cells match in attributes the cells with mines or occurrences. 20 refs., 1 fig., 1 tab.

  3. Los Alamos National Laboratory building cost index

    SciTech Connect

    Orr, H.D.; Lemon, G.D.

    1982-10-01

    The Los Alamos National Laboratory Building Cost Index indicates that actual escalation since 1970 is near 10% per year. Therefore, the Laboratory will continue using a 10% per year escalation rate for construction estimates through 1985 and a slightly lower rate of 8% per year from 1986 through 1990. The computerized program compares the different elements involved in the cost of a typical construction project, which for our purposes, is a complex of office buildings and experimental laboratories. The input data used in the program consist primarily of labor costs and material and equipment costs. The labor costs are the contractual rates of the crafts workers in the Los Alamos area. For the analysis, 12 field-labor craft categories are used; each is weighted corresponding to the labor craft distribution associated with the typical construction project. The materials costs are current Los Alamos prices. Additional information sources include material and equipment quotes obtained through conversations with vendors and from trade publications. The material and equipment items separate into 17 categories for the analysis and are weighted corresponding to the material and equipment distribution associated with the typical construction project. The building cost index is compared to other national building cost indexes.

  4. Los Alamos National Laboratory Building Cost Index

    SciTech Connect

    Orr, H.D.; Lemon, G.D.

    1983-01-01

    The Los Alamos National Laboratory Building Cost Index indicates that actual escalation since 1970 is near 10% per year. Therefore, the Laboratory will continue using a 10% per year escalation rate for construction estimates through 1985 and a slightly lower rate of 8% per year from 1986 through 1990. The computerized program compares the different elements involved in the cost of a typical construction project, which for our purposes, is a complex of office buildings and experimental laboratores. The input data used in the program consist primarily of labor costs and material and equipment costs. The labor costs are the contractural rates of the crafts workers in the Los Alamos area. For the analysis, 12 field-labor draft categories are used; each is weighted corresponding to the labor craft distribution associated with the typical construction project. The materials costs are current Los Alamos prices. Additional information sources include material and equipment quotes obtained through conversations with vendors and from trade publications. The material and equipment items separate into 17 categories for the analysis and are weighted corresponding to the material and equipment distribution associated with the typical construction project. The building cost index is compared to other national building cost indexes.

  5. The letter height superiority illusion.

    PubMed

    New, Boris; Doré-Mazars, Karine; Cavézian, Céline; Pallier, Christophe; Barra, Julien

    2016-02-01

    Letters are identified better when they are embedded within words rather than within pseudowords, a phenomenon known as the word superiority effect (Reicher in Journal of Experimental Psychology, 81, 275-280, 1969). This effect is, inter alia, accounted for by the interactive-activation model (McClelland & Rumelhart in Psychological Review, 88, 375-407, 1981) through feedback from word to letter nodes. In this study, we investigated whether overactivation of features could lead to perceptual bias, wherein letters would be perceived as being taller than pseudoletters, or words would be perceived as being taller than pseudowords. In two experiments, we investigated the effects of letter and lexical status on the perception of size. Participants who had to compare the heights of letters and pseudoletters, or of words and pseudowords, indeed perceived the former stimuli as being taller than the latter. Possible alternative interpretations of this height superiority effect for letters and words are discussed. PMID:26370216

  6. Height ridges of oriented medialness

    NASA Astrophysics Data System (ADS)

    Furst, Jacob David

    Shape analysis of objects is an important aspect of medical image processing. Information gained from shape analysis can be used for object segmentation, object- based registration and object visualization. One shape analysis tool is the core, defined to be a height ridge of a medial strength measure made on an image. In this dissertation I present 3D cores, defined here to be optimal scale-orientation height ridges of oriented medial strength measurements. This dissertation covers (1)a medial strength measurement, Blum- like medialness, that is robust, efficient, and insensitive to intrafigural interference, (2)a new definition for a ridge, the optimal parameter height ridge, and its properties, and (3)an algorithm, Marching Ridges, for extracting cores. The medial strength measurement uses Gaussian derivatives, so is insensitive to noise, and responds to object boundaries at points rather than on entire spheres, so is faster to calculate and less sensitive to boundaries of other image figures. The Marching Ridges algorithm uses the grid structure of the image domain to identify ridge points as zero-crossings of first derivatives and to track ridges through the image domain. I include results of this algorithm on medical images of cerebral vasculature, a skull, kidneys, and brain ventricles.

  7. Salam's independence

    NASA Astrophysics Data System (ADS)

    Fraser, Gordon

    2009-01-01

    In his kind review of my biography of the Nobel laureate Abdus Salam (December 2008 pp45-46), John W Moffat wrongly claims that Salam had "independently thought of the idea of parity violation in weak interactions".

  8. Maintaining Independence.

    ERIC Educational Resources Information Center

    Upah-Bant, Marilyn

    1978-01-01

    Describes the over-all business and production operation of the "Daily Illini" at the University of Illinois to show how this college publication has assumed the burdens and responsibilities of true independence. (GW)

  9. DETERMINISTIC TRANSPORT METHODS AND CODES AT LOS ALAMOS

    SciTech Connect

    J. E. MOREL

    1999-06-01

    The purposes of this paper are to: Present a brief history of deterministic transport methods development at Los Alamos National Laboratory from the 1950's to the present; Discuss the current status and capabilities of deterministic transport codes at Los Alamos; and Discuss future transport needs and possible future research directions. Our discussion of methods research necessarily includes only a small fraction of the total research actually done. The works that have been included represent a very subjective choice on the part of the author that was strongly influenced by his personal knowledge and experience. The remainder of this paper is organized in four sections: the first relates to deterministic methods research performed at Los Alamos, the second relates to production codes developed at Los Alamos, the third relates to the current status of transport codes at Los Alamos, and the fourth relates to future research directions at Los Alamos.

  10. MULTICHANNEL PULSE-HEIGHT ANALYZER

    DOEpatents

    Russell, J.T.; Lefevre, H.W.

    1958-01-21

    This patent deals with electronic computing circuits and more particularly to pulse-height analyzers used for classifying variable amplitude pulses into groups of different amplitudes. The device accomplishes this pulse allocation by by converting the pulses into frequencies corresponding to the amplitudes of the pulses, which frequencies are filtered in channels individually pretuned to a particular frequency and then detected and recorded in the responsive channel. This circuit substantially overcomes the disadvantages of prior annlyzers incorporating discriminators pre-set to respond to certain voltage levels, since small variation in component values is not as critical to satisfactory circuit operation.

  11. Judgments of others' heights are biased toward the height of the perceiver.

    PubMed

    Twedt, Elyssa; Crawford, L Elizabeth; Proffitt, Dennis R

    2015-04-01

    We examined how observers use one aspect of their own morphology, height, when judging the physical characteristics of other people. To address this, participants judged the heights of people as they walked past. We tested the hypothesis that differences between participant and target height account for systematic patterns of variability and bias in height estimation. Height estimate error and error variability increased as the difference between participant height and target height increased, suggesting that estimates are scaled to observers' heights. Furthermore, participants' height estimates were biased toward two standards, demonstrating classic category effects. First, estimates were biased toward participants' own heights. Second, participants biased height estimates toward the average height of the target distribution. These results support past research on using both the body and categorical information to estimate target properties but extend to real-world situations involving interactions with moving people, such as height judgments provided during eyewitness testimony. PMID:25028087

  12. Los Alamos Before and After the Fire

    NASA Technical Reports Server (NTRS)

    2002-01-01

    On May 4, 2000, a prescribed fire was set at Bandelier National Monument, New Mexico, to clear brush and dead and dying undergrowth to prevent a larger, subsequent wildfire. Unfortunately, due to high winds and extremely dry conditions in the surrounding area, the prescribed fire quickly raged out of control and, by May 10, the blaze had spread into the nearby town of Los Alamos. In all, more than 20,000 people were evacuated from their homes and more than 200 houses were destroyed as the flames consumed about 48,000 acres in and around the Los Alamos area. The pair of images above were acquired by the Enhanced Thematic Mapper Plus (ETM+) sensor, flying aboard NASA's Landsat 7 satellite, shortly before the Los Alamos fire (top image, acquired April 14) and shortly after the fire was extinguished (lower image, June 17). The images reveal the extent of the damage caused by the fire. Combining ETM+ channels 7, 4, and 2 (one visible and two infrared channels) results in a false-color image where vegetation appears as bright to dark green. Forested areas are generally dark green while herbaceous vegetation is light green. Rangeland or more open areas appear pink to light purple. Areas with extensive pavement or urban development appear light blue or white to purple. Less densely-developed residential areas appear light green and golf courses are very bright green. In the lower image, the areas recently burned appear bright red. Landsat 7 data courtesy United States Geological Survey EROS DataCenter. Images by Robert Simmon, NASA GSFC.

  13. Biological assessment for the effluent reduction program, Los Alamos National Laboratory, Los Alamos, New Mexico

    SciTech Connect

    Cross, S.P.

    1996-08-01

    This report describes the biological assessment for the effluent recution program proposed to occur within the boundaries of Los Alamos National Laboratory. Potential effects on wetland plants and on threatened and endangered species are discussed, along with a detailed description of the individual outfalls resulting from the effluent reduction program.

  14. LAMPF II workshop, Los Alamos National Laboratory, Los Alamos, New Mexico, February 1-4, 1982

    SciTech Connect

    Thiessen, H.A.

    1982-01-01

    This report contains the proceedings of the first LAMPF II Workshop held at Los Alamos February 1 to 4, 1982. Included are the talks that were available in written form. The conclusion of the participants was that there are many exciting areas of physics that will be addressed by such a machine.

  15. Los Alamos National Laboratory strategic directions

    SciTech Connect

    Hecker, S.

    1995-10-01

    It is my pleasure to welcome you to Los Alamos. I like the idea of bringing together all aspects of the research community-defense, basic science, and industrial. It is particularly important in today`s times of constrained budgets and in fields such as neutron research because I am convinced that the best science and the best applications will come from their interplay. If we do the science well, then we will do good applications. Keeping our eye focused on interesting applications will spawn new areas of science. This interplay is especially critical, and it is good to have these communities represented here today.

  16. Experience with confirmation measurement at Los Alamos

    SciTech Connect

    Marshall, R.S.; Wagner, R.P.; Hsue, F.

    1985-01-01

    Confirmation measurements are used at Los Alamos in support of incoming and outgoing shipment accountibility and for support of both at /sup 235/U and Pu inventories. Statistical data are presented to show the consistency of measurements on items of identical composition and on items measured at two facilitis using similar instruments. A description of confirmation measurement techniques used in support of /sup 235/U and Pu inventories and a discussion on the ability of the measurements to identify items with misstated SNM are given.

  17. Materials accounting at Los Alamos National Laboratory

    SciTech Connect

    Roberts, N.J.; Erkkila, B.H.; Kelso, H.F.

    1985-07-20

    The materials accounting system at Los Alamos has evolved from an ''80-column'' card system to a very sophisticated near-real-time computerized nuclear material accountability and safeguards system (MASS). The present hardware was designed and acquired in the late 70's and is scheduled for a major upgrade in fiscal year 1986. The history of the system from 1950 through the DYMAC of the late 70's up to the present will be discussed. The philosophy of the system along with the details of the system will be covered. This system has addressed the integrated problems of management, control, and accounting of nuclear material successfully. 8 refs., 3 figs., 1 tab.

  18. Environmental Programs at Los Alamos National Laboratory

    SciTech Connect

    Jones, Patricia

    2012-07-11

    Summary of this project is: (1) Teamwork, partnering to meet goals - (a) Building on cleanup successes, (b) Solving legacy waste problems, (c) Protecting the area's environment; (2) Strong performance over the past three years - (a) Credibility from four successful Recovery Act Projects, (b) Met all Consent Order milestones, (c) Successful ramp-up of TRU program; (3) Partnership between the National Nuclear Security Administration's Los Alamos Site Office, DOE Carlsbad Field Office, New Mexico Environment Department, and contractor staff enables unprecedented cleanup progress; (4) Continued focus on protecting water resources; and (5) All consent order commitments delivered on time or ahead of schedule.

  19. Los Alamos National Laboratory computer benchmarking 1982

    SciTech Connect

    Martin, J.L.

    1983-06-01

    Evaluating the performance of computing machinery is a continual effort of the Computer Research and Applications Group of the Los Alamos National Laboratory. This report summarizes the results of the group's benchmarking activities performed between October 1981 and September 1982, presenting compilation and execution times as well as megaflop rates for a set of benchmark codes. Tests were performed on the following computers: Cray Research, Inc. (CRI) Cray-1S; Control Data Corporation (CDC) 7600, 6600, Cyber 73, Cyber 825, Cyber 835, Cyber 855, and Cyber 205; Digital Equipment Corporation (DEC) VAX 11/780 and VAX 11/782; and Apollo Computer, Inc., Apollo.

  20. Interfacial atomic composition and Schottky barrier heights at the Al/GaAs(001) interface

    SciTech Connect

    Dandrea, R.G.; Duke, C.B.

    1993-07-01

    The influence of different interfacial chemical compositions on the Schottky barrier heights across the Al/GaAs(001) interface is studied using first-principles local density functional calculations. The barrier heights are calculated for seven different interfacial chemical compositions, including the chemically abrupt As-terminated and Ga-terminated interfaces, and also several other interfaces related by Al{leftrightarrow}Ga place exchange or containing As antisites. We find p-type barrier heights {phi}p that vary by 0.4 eV, demonstrating a significant influence of the interface composition on the resulting barrier heights. The barrier height variation is explained by the different chemical bonding at the interface in the various cases. The metal induced gap states (MIGS) of two structures with different barrier heights are compared in order to demonstrate why such states do not result in barrier heights independent of interfacial chemical composition.

  1. Independent Living.

    ERIC Educational Resources Information Center

    Nathanson, Jeanne H., Ed.

    1994-01-01

    This issue of "OSERS" addresses the subject of independent living of individuals with disabilities. The issue includes a message from Judith E. Heumann, the Assistant Secretary of the Office of Special Education and Rehabilitative Services (OSERS), and 10 papers. Papers have the following titles and authors: "Changes in the Rehabilitation Act of…

  2. The Climate at Los Alamos; Are we measurement changes?

    SciTech Connect

    Dewart, Jean Marie

    2015-04-16

    A new report shows new graphic displays of the weather trends in Los Alamos, New Mexico, and at the Los Alamos National Laboratory (LANL). The graphs show trends of average, minimum average, and maximum average temperature for summer and winter months going back decades. Records of summer and winter precipitation are also included in the report.

  3. Understanding independence

    NASA Astrophysics Data System (ADS)

    Annan, James; Hargreaves, Julia

    2016-04-01

    In order to perform any Bayesian processing of a model ensemble, we need a prior over the ensemble members. In the case of multimodel ensembles such as CMIP, the historical approach of ``model democracy'' (i.e. equal weight for all models in the sample) is no longer credible (if it ever was) due to model duplication and inbreeding. The question of ``model independence'' is central to the question of prior weights. However, although this question has been repeatedly raised, it has not yet been satisfactorily addressed. Here I will discuss the issue of independence and present a theoretical foundation for understanding and analysing the ensemble in this context. I will also present some simple examples showing how these ideas may be applied and developed.

  4. Childhood infections and adult height in monozygotic twin pairs.

    PubMed

    Hwang, Amie E; Mack, Thomas M; Hamilton, Ann S; Gauderman, W James; Bernstein, Leslie; Cockburn, Myles G; Zadnick, John; Rand, Kristin A; Hopper, John L; Cozen, Wendy

    2013-08-15

    Adult height is determined by genetics and childhood nutrition, but childhood infections may also play a role. Monozygotic twins are genetically matched and offer an advantage when identifying environmental determinants. In 2005-2007, we examined the association of childhood infections with adult height in 140 height-discordant monozygotic twin pairs from the California Twin Program. To obtain information on childhood infections and growth, we interviewed the mothers of monozygotic twins who differed in self-reported adult height by at least 1-inch (2.5 cm). Within-pair differences in the relative frequency of childhood infections were highly correlated, especially within age groups. A conditional logistic regression analysis demonstrated that more reported episodes of febrile illness occurred in the twin with shorter stature (odds ratio = 2.00, 95% confidence interval: 1.18, 3.40). The association was strongest for differences in the relative frequency of infection during the toddler years (ages 1-5: odds ratio = 3.34, 95% confidence interval: 1.47, 7.59) and was similar when restricted to twin pairs of equal birth length. The association was not explained by differential nutritional status. Measures of childhood infection were associated with height difference in monozygotic twin pairs, independent of genome, birth length, and available measures of diet. PMID:23585330

  5. The genetic architecture of maize height

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Height is one of the most heritable and easily measured traits in maize (Zea mays L.). Given a pedigree or estimates of the genomic identity-by-state (IBS) among related plants, height is also accurately predictable. But, mapping alleles explaining natural variation in maize height remains a formida...

  6. Counting Young Tableaux of Bounded Height

    NASA Astrophysics Data System (ADS)

    Bergeron, Francois; Gascon, Francis

    2000-03-01

    We show that formulas of Gessel, for the generating functions for Young standard tableaux of height bounded by k (see [2]), satisfy linear differential equations, with polynomial coefficients, equivalent to P-recurrences conjectured by Favreau, Krob and the first author (see [1]) for the number of bounded height tableaux and pairs of bounded height tableaux.

  7. Maternal Height and Child Growth Patterns

    PubMed Central

    Addo, O. Yaw; Stein, Aryeh D.; Fall, Caroline H.; Gigante, Denise P.; Guntupalli, Aravinda M.; Horta, Bernardo L.; Kuzawa, Christopher W.; Lee, Nanette; Norris, Shane A.; Prabhakaran, Poornima; Richter, Linda M.; Sachdev, Harshpal S.; Martorell, Reynaldo

    2013-01-01

    Objective To examine associations between maternal height and child growth during 4 developmental periods: intrauterine, birth to age 2 years, age 2 years to mid-childhood (MC), and MC to adulthood. Study design Pooled analysis of maternal height and offspring growth using 7630 mother–child pairs from 5 birth cohorts (Brazil, Guatemala, India, the Philippines, and South Africa). We used conditional height measures that control for collinearity in height across periods. We estimated associations between maternal height and offspring growth using multivariate regression models adjusted for household income, child sex, birth order, and study site. Results Maternal height was associated with birth weight and with both height and conditional height at each age examined. The strongest associations with conditional heights were for adulthood and 2 years of age. A 1-cm increase in maternal height predicted a 0.024 (95% CI: 0.021-0.028) SD increase in offspring birth weight, a 0.037 (95% CI: 0.033-0.040) SD increase in conditional height at 2 years, a 0.025 (95% CI: 0.021-0.029 SD increase in conditional height in MC, and a 0.044 (95% CI: 0.040-0.048) SD increase in conditional height in adulthood. Short mothers (<150.1 cm) were more likely to have a child who was stunted at 2 years (prevalence ratio = 3.20 (95% CI: 2.80-3.60) and as an adult (prevalence ratio = 4.74, (95% CI: 4.13-5.44). There was no evidence of heterogeneity by site or sex. Conclusion Maternal height influences offspring linear growth over the growing period. These influences likely include genetic and non-genetic factors, including nutrition-related intergenerational influences on growth that prevent the attainment of genetic height potential in low- and middle-income countries. PMID:23477997

  8. Estimating vehicle height using homographic projections

    DOEpatents

    Cunningham, Mark F; Fabris, Lorenzo; Gee, Timothy F; Ghebretati, Jr., Frezghi H; Goddard, James S; Karnowski, Thomas P; Ziock, Klaus-peter

    2013-07-16

    Multiple homography transformations corresponding to different heights are generated in the field of view. A group of salient points within a common estimated height range is identified in a time series of video images of a moving object. Inter-salient point distances are measured for the group of salient points under the multiple homography transformations corresponding to the different heights. Variations in the inter-salient point distances under the multiple homography transformations are compared. The height of the group of salient points is estimated to be the height corresponding to the homography transformation that minimizes the variations.

  9. Portable MRI developed at Los Alamos

    SciTech Connect

    Espy, Michelle

    2015-04-22

    Scientists at Los Alamos National Laboratory are developing an ultra-low-field Magnetic Resonance Imaging (MRI) system that could be low-power and lightweight enough for forward deployment on the battlefield and to field hospitals in the World's poorest regions. "MRI technology is a powerful medical diagnostic tool," said Michelle Espy, the Battlefield MRI (bMRI) project leader, "ideally suited for imaging soft-tissue injury, particularly to the brain." But hospital-based MRI devices are big and expensive, and require considerable infrastructure, such as large quantities of cryogens like liquid nitrogen and helium, and they typically use a large amount of energy. "Standard MRI machines just can't go everywhere," said Espy. "Soldiers wounded in battle usually have to be flown to a large hospital and people in emerging nations just don't have access to MRI at all. We've been in contact with doctors who routinely work in the Third World and report that MRI would be extremely valuable in treating pediatric encephalopathy, and other serious diseases in children." So the Los Alamos team started thinking about a way to make an MRI device that could be relatively easy to transport, set up, and use in an unconventional setting. Conventional MRI machines use very large magnetic fields that align the protons in water molecules to then create magnetic resonance signals, which are detected by the machine and turned into images. The large magnetic fields create exceptionally detailed images, but they are difficult and expensive to make. Espy and her team wanted to see if images of sufficient quality could be made with ultra-low-magnetic fields, similar in strength to the Earth's magnetic field. To achieve images at such low fields they use exquisitely sensitive detectors called Superconducting Quantum Interference Devices, or SQUIDs. SQUIDs are among the most sensitive magnetic field detectors available, so interference with the signal is the primary stumbling block. "SQUIDs are

  10. Environmental surveillance at Los Alamos during 1987

    SciTech Connect

    Not Available

    1988-05-01

    This report describes the environmental surveillance program conducted by Los Alamos National Laboratory during 1987. Routine monitoring for radiation and radioactive or chemical materials is conducted on the Laboratory site as well as in the surrounding region. Monitoring results are used to determine compliance with appropriate standards and to permit early identification of potentially undesirable trends. Results and interpretation of data for 1987 cover: external penetrating radiation; quantities of airborne emissions and liquid effluents; concentrations of chemicals and radionuclides in ambient air, surface and ground waters, municipal water supply, soils and sediments, and foodstuffs; and environmental compliance. Comparisons with appropriate standards, regulations, and background levels provide the basis for concluding that environmental effects from Laboratory operations are insignificant and do not pose a threat to the public, Laboratory employees, or the environment. 113 refs., 33 figs., 120 tabs.

  11. Environmental surveillance at Los Alamos during 1995

    SciTech Connect

    1996-10-01

    This report describes the environmental surveillance program at Los Alamos National Laboratory (LANL or the Laboratory) during 1995. The Laboratory routinely monitors for radiation and for radioactive and nonradioactive materials at (or on) Laboratory sites as well as in the surrounding region. LANL uses the monitoring result to determine compliance with appropriate standards and to identify potentially undesirable trends. Data were collected in 1995 to assess external penetrating radiation; quantities of airborne emissions and liquid effluents; concentrations of chemicals and radionuclides in ambient air, surface waters and groundwaters, municipal water supply, soils and sediments, and foodstuffs; and environmental compliance. Using comparisons with standards, regulations, and background levels, this report concludes that environmental effects from Laboratory operations are small and do not pose a demonstrable threat to the public, Laboratory employees, or the environment.

  12. Environmental surveillance at Los Alamos during 1979

    SciTech Connect

    Not Available

    1980-04-01

    This report documents the environmental surveillance program conducted by the Los Alamos Scientific Laboratory (LASL) in 1979. Routine monitoring for radiation and radioactive or chemical substances was conducted on the Laboratory site and in the surrounding region to determine compliance with appropriate standards and permit early identification of possible undesirable trends. Results and interpretation of the data for 1979 on penetrating radiation, chemical and radiochemical quality of ambient air, surface and ground water, municipal water supply, soils and sediments, food, and airborne and liquid effluents are included. Comparisons with appropriate standards and regulations or with background levels from natural or other non-LASL sources provide a basis for concluding that environmental effects attributable to LASL operations are minor and cannot be considered likely to result in any hazard to the population of the area. Results of several special studies provide documentation of some unique environmental conditions in the LASL environs.

  13. Environmental surveillance at Los Alamos during 1989

    SciTech Connect

    Not Available

    1990-12-01

    This report describes the environmental surveillance program conducted by Los Alamos National Laboratory during 1989. Routine monitoring for radiation and radioactive or chemical materials is conducted on the Laboratory site as well as in the surrounding region. Monitoring results are used to determine compliance with appropriate standards and to permit early identification of potentially undesirable trends. Results and interpretation of data for 1989 cover external penetrating radiation; quantities of airborne emissions and effluents; concentrations of chemicals and radionuclides in ambient air, surface and ground waters, municipal water supply, soils and sediments, and foodstuffs; and environmental compliance. Comparisons with appropriate standards, regulations, and background levels provide the basis for concluding that environmental effects from Laboratory operations are small and do not pose a threat to the public, Laboratory employees, or the environment. 58 refs., 31 figs., 39 tabs.

  14. Environmental surveillance at Los Alamos during 1992

    SciTech Connect

    Kohen, K.; Stoker, A.; Stone, G.

    1994-07-01

    This report describes the environmental surveillance program at Los Alamos National Laboratory during 1992. The Laboratory routinely monitors for radiation and for radioactive and nonradioactive materials at (or on) Laboratory sites as well as in the surrounding region. LANL uses the monitoring results to determine compliance with appropriate standards and to identify potentially undesirable trends. Data were collected in 1992 to assess external penetrating radiation; quantities of airborne emissions and liquid effluents; concentrations of chemicals and radionuclides in ambient air, surface waters and groundwaters, municipal water supply, soils and sediments, and foodstuffs; and environmental compliance. Using comparisons with standards, regulations, and background levels, this report concludes that environmental effects from Laboratory operations are small and do not pose a demonstrable threat to the public, laboratory employees, or the environment.

  15. The Los Alamos Intense Neutron Source

    SciTech Connect

    Nebel, R.A.; Barnes, D.C.; Bollman, R.; Eden, G.; Morrison, L.; Pickrell, M.M.; Reass, W.

    1997-10-01

    The Intense Neutron Source (INS) is an Inertial Electrostatic Confinement (IEC) fusion device presently under construction at Los Alamos National Laboratory. It is designed to produce 10{sup 11} neutrons per second steady-state using D-T fuel. Phase 1 operation of this device will be as a standard three grid IEC ion focus device. Expected performance has been predicted by scaling from a previous IEC device. Phase 2 operation of this device will utilize a new operating scheme, the Periodically Oscillating Plasma Sphere (POPS). This scheme is related to both the Spherical Reflect Diode and the Oscillating Penning Trap. With this type of operation the authors hope to improve plasma neutron production to about 10{sup 13} neutrons/second.

  16. Information about Practicums at Los Alamos

    SciTech Connect

    Bradley, Paul A.

    2012-07-24

    The Los Alamos Neutron Science Center is the premier facility for neutron science experiments ranging from cross section measurements, neutron scattering experiments, proton radiography, cold neutrons, actinide neutronic properties, and many other exciting topics. The National High Magnetic Field Laboratory is home to several powerful magnets, including the one that created the first non-destructive 100 Tesla field in March 2012. They probe the electronic structure of superconductors, magnetic properties of materials (including magneto-quantum effects). Research is also conducted in correlated materials, thermoacoustics, and magnetic properties of actinides. The Trident Laser has a unique niche with very high power, short pulse experiments, with a peak power of 10{sup 20} W in short pulse mode. Discoveries range from production of monoenergetic MeV ion beam, nonlinear kinetic plasma waves, the transition between kinetic and fluid nonlinear behavior and other laser-plasma interaction processes.

  17. Environmental analysis of Lower Pueblo/Lower Los Alamos Canyon, Los Alamos, New Mexico

    SciTech Connect

    Ferenbaugh, R.W.; Buhl, T.E.; Stoker, A.K.; Becker, N.M.; Rodgers, J.C.; Hansen, W.R.

    1994-12-01

    The radiological survey of the former radioactive waste treatment plant site (TA-45), Acid Canyon, Pueblo Canyon, and Los Alamos Canyon found residual contamination at the site itself and in the channel and banks of Acid, Pueblo, and lower Los Alamos Canyons all the way to the Rio Grande. The largest reservoir of residual radioactivity is in lower Pueblo Canyon, which is on DOE property. However, residual radioactivity does not exceed proposed cleanup criteria in either lower Pueblo or lower Los Alamos Canyons. The three alternatives proposed are (1) to take no action, (2) to construct a sediment trap in lower Pueblo Canyon to prevent further transport of residual radioactivity onto San Ildefonso Indian Pueblo land, and (3) to clean the residual radioactivity from the canyon system. Alternative 2, to cleanup the canyon system, is rejected as a viable alternative. Thousands of truckloads of sediment would have to be removed and disposed of, and this effort is unwarranted by the low levels of contamination present. Residual radioactivity levels, under either present conditions or projected future conditions, will not result in significant radiation doses to persons exposed. Modeling efforts show that future transport activity will not result in any residual radioactivity concentrations higher than those already existing. Thus, although construction of a sediment trap in lower Pueblo Canyon is a viable alternative, this effort also is unwarranted, and the no-action alternative is the preferred alternative.

  18. Environmental surveillance at Los Alamos during 2009

    SciTech Connect

    Fuehne, David; Poff, Ben; Hjeresen, Denny; Isaacson, John; Johnson, Scot; Morgan, Terry; Paulson, David; Salzman, Sonja; Rogers, David

    2010-09-30

    Environmental Surveillance at Los Alamos reports are prepared annually by the Los Alamos National Laboratory (the Laboratory) environmental organization, as required by US Department of Energy Order 5400.1, General Environmental Protection Program, and US Department of Energy Order 231.1A, Environment, Safety, and Health Reporting. These annual reports summarize environmental data that are used to determine compliance with applicable federal, state, and local environmental laws and regulations, executive orders, and departmental policies. Additional data, beyond the minimum required, are also gathered and reported as part of the Laboratory’s efforts to ensure public safety and to monitor environmental quality at and near the Laboratory. Chapter 1 provides an overview of the Laboratory’s major environmental programs and explains the risks and the actions taken to reduce risks at the Laboratory from environmental legacies and waste management operations. Chapter 2 reports the Laboratory’s compliance status for 2009. Chapter 3 provides a summary of the maximum radiological dose the public and biota populations could have potentially received from Laboratory operations and discusses chemical exposures. The environmental surveillance and monitoring data are organized by environmental media (air in Chapter 4; water and sediments in Chapters 5 and 6; soils in Chapter 7; and foodstuffs and biota in Chapter 8) in a format to meet the needs of a general and scientific audience. Chapter 9 provides a summary of the status of environmental restoration work around LANL. The new Chapter 10 describes the Laboratory’s environmental stewardship efforts and provides an overview of the health of the Rio Grande. A glossary and a list of acronyms and abbreviations are in the back of the report. Appendix A explains the standards for environmental contaminants, Appendix B explains the units of measurements used in this report, Appendix C describes the Laboratory’s technical

  19. Environmental surveillance at Los Alamos during 2008

    SciTech Connect

    Fuehne, David; Gallagher, Pat; Hjeresen, Denny; Isaacson, John; Johson, Scot; Morgan, Terry; Paulson, David; Rogers, David

    2009-09-30

    Environmental Surveillance at Los Alamos reports are prepared annually by the Los Alamos National Laboratory (the Laboratory) Environmental Programs Directorate, as required by US Department of Energy Order 450.1, General Environmental Protection Program, and US Department of Energy Order 231.1A, Environment, Safety, and Health Reporting. These annual reports summarize environmental data that are used to determine compliance with applicable federal, state, and local environmental laws and regulations, executive orders, and departmental policies. Additional data, beyond the minimum required, are also gathered and reported as part of the Laboratory’s efforts to ensure public safety and to monitor environmental quality at and near the Laboratory. Chapter 1 provides an overview of the Laboratory’s major environmental programs and explains the risks and the actions taken to reduce risks at the Laboratory from environmental legacies and waste management operations. Chapter 2 reports the Laboratory’s compliance status for 2007. Chapter 3 provides a summary of the maximum radiological dose the public and biota populations could have potentially received from Laboratory operations and discusses chemical exposures. The environmental surveillance and monitoring data are organized by environmental media (Chapter 4, air; Chapters 5 and 6, water and sediments; Chapter 7, soils; and Chapter 8, foodstuffs and biota) in a format to meet the needs of a general and scientific audience. Chapter 9 provides a summary of the status of environmental restoration work around LANL. A glossary and a list of acronyms and abbreviations are in the back of the report. Appendix A explains the standards for environmental contaminants, Appendix B explains the units of measurements used in this report, Appendix C describes the Laboratory’s technical areas and their associated programs, and Appendix D provides web links to more information.

  20. Environmental surveillance at Los Alamos during 2005

    SciTech Connect

    2006-09-30

    Environmental Surveillance at Los Alamos reports are prepared annually by the Los Alamos National Laboratory (LANL or the Laboratory) environmental organization, as required by US Department of Energy Order 5400.1, General Environmental Protection Program, and US Department of Energy Order 231.IA, Environment, Safety, and Health Reporting. These annual reports summarize environmental data that are used to determine compliance with applicable federal, state, and local environmental laws and regulations, executive orders, and departmental policies. Additional data, beyond the minimum required, are also gathered and reported as part of the Laboratory's efforts to ensure public safety and to monitor environmental quality at and near the Laboratory. Chapter 1 provides an overview of the Laboratory's major environmental programs. Chapter 2 reports the Laboratory's compliance status for 2005. Chapter 3 provides a summary of the maximum radiological dose the public and biota populations could have potentially received from Laboratory operations. The environmental surveillance and monitoring data are organized by environmental media (Chapter 4, Air; Chapters 5 and 6, Water and Sediments; Chapter 7, Soils; and Chapter 8, Foodstuffs and Biota) in a format to meet the needs of a general and scientific audience. Chapter 9, new for this year, provides a summary of the status of environmental restoration work around LANL. A glossary and a list ofacronyms and abbreviations are in the back of the report. Appendix A explains the standards for environmental contaminants, Appendix B explains the units of measurements used in this report, Appendix C describes the Laboratory's technical areas and their associated programs, and Appendix D provides web links to more information.

  1. Use of knee height for the estimation of body height in Thai adult women.

    PubMed

    Chumpathat, Nopphanath; Rangsin, Ram; Changbumrung, Supranee; Soonthornworasiri, Ngamphol; Durongritichai, Vanida; Kwanbunjan, Karunee

    2016-01-01

    Knee height has been the most frequently used measure for height prediction where full height is difficult to measure. The aim of this study was to develop and validate predictive equations using knee height to estimate the height of Thai women. The female participants were 18-59 years of age and lived in Bangkok or three surrounding provinces. They were assigned to one of two groups; the equation development group (n=488) and the equation validation group (n=188). Standing height and knee height were measured in duplicate using a stadiometer and a knee height calliper. Age and physical characteristics of the equation development group and the validate group were comparable. The measured heights showed a significant strongly positive correlation with the mean knee height (r=0.84, p<0.001). Mean knee height in a regression model exhibited the most accurate height prediction (adjusted R(2)=0.718, standard error of estimate=2.80), according to the equation "Height=38.1+2.45 (average knee height) - 0.051(age)". This study proposes a new height estimation equation for Thai adult women using knee height. The equation shows more estimation power than the previous studies conducted in Thailand. PMID:27440676

  2. Height measurement in the critically ill patient: A tall order in the critical care unit.

    PubMed

    Venkataraman, Ramesh; Ranganathan, Lakshmi; Nirmal, Vipin; Kameshwaran, J; Sheela, C V; Renuka, M V; Ramakrishnan, Nagarajan

    2015-11-01

    Height measurement in the critical care unit is necessary for estimating ideal body weight and providing titrated patient care. In this study, we compare three methods of height assessment and evaluate their level of correlation and inter-observer reproducibility. Heights of 100 consecutive patients were assessed independently by two nurses by supine, four point, and arm span methods. Paired sample t-test, one-way analysis of variance, Tukey's honestly significant difference post-hoc analysis and Bland-Altman plots were performed to assess agreement between measurements. Arm span method showed higher mean height compared to supine and four point methods. Mean heights derived by supine and four point measurements were similar to each other but were significantly different from that of arm span method (P < 0.001). Inter-observer correlation of the measured heights was very good among all three methods. The supine method seems to be easy, accurate, and reproducible in our study. PMID:26730118

  3. Climate and Edaphic Controls on Humid Tropical Forest Tree Height

    NASA Astrophysics Data System (ADS)

    Yang, Y.; Saatchi, S. S.; Xu, L.

    2014-12-01

    Uncertainty in the magnitude and spatial variations of forest carbon density in tropical regions is due to under sampling of forest structure from inventory plots and the lack of regional allometry to estimate the carbon density from structure. Here we quantify the variation of tropical forest structure by using more than 2.5 million measurements of canopy height from systematic sampling of Geoscience Laser Altimeter System (GLAS) satellite observations between 2004 to 2008 and examine the climate and edaphic variables influencing the variations. We used top canopy height of GLAS footprints (~ 0.25 ha) to grid the statistical mean and 90 percentile of samples at 0.5 degrees to capture the regional variability of large trees in tropics. GLAS heights were also aggregated based on a stratification of tropical regions using soil, elevation, and forest types. Both approaches provided consistent patterns of statistically dominant large trees and the least heterogeneity, both as strong drivers of distribution of high biomass forests. Statistical models accounting for spatial autocorrelation suggest that climate, soil and spatial features together can explain more than 60% of the variations in observed tree height information, while climate-only variables explains about one third of the first-order changes in tree height. Soil basics, including physical compositions such as clay and sand contents, chemical properties such as PH values and cation-exchange capacity, as well as biological variables such as organic matters, all present independent but statistically significant relationships to tree height variations. The results confirm other landscape and regional studies that soil fertility, geology and climate may jointly control a majority of the regional variations of forest structure in pan-tropics and influencing both biomass stocks and dynamics. Consequently, other factors such as biotic and disturbance regimes, not included in this study, may have less influence on

  4. Height and calories in early childhood.

    PubMed

    Griffen, Andrew S

    2016-03-01

    This paper estimates a height production function using data from a randomized nutrition intervention conducted in rural Guatemala from 1969 to 1977. Using the experimental intervention as an instrument, the IV estimates of the effect of calories on height are an order of magnitude larger than the OLS estimates. Information from a unique measurement error process in the calorie data, counterfactuals results from the estimated model and external evidence from migration studies suggest that IV is not identifying a policy relevant average marginal impact of calories on height. The preferred, attenuation bias corrected OLS estimates from the height production function suggest that, averaging over ages, a 100 calorie increase in average daily calorie intake over the course of a year would increase height by 0.06 cm. Counterfactuals from the model imply that calories gaps in early childhood can explain at most 16% of the height gap between Guatemalan children and the US born children of Guatemalan immigrants. PMID:26656205

  5. Developing independence.

    PubMed

    Turnbull, A P; Turnbull, H R

    1985-03-01

    The transition from living a life as others want (dependence) to living it as the adolescent wants to live it (independence) is extraordinarily difficult for most teen-agers and their families. The difficulty is compounded in the case of adolescents with disabilities. They are often denied access to the same opportunities of life that are accessible to the nondisabled. They face special problems in augmenting their inherent capacities so that they can take fuller advantage of the accommodations that society makes in an effort to grant them access. In particular, they need training designed to increase their capacities to make, communicate, implement, and evaluate their own life-choices. The recommendations made in this paper are grounded in the long-standing tradition of parens patriae and enlightened paternalism; they seek to be deliberately and cautiously careful about the lives of adolescents with disabilities and their families. We based them on the recent tradition of anti-institutionalism and they are also consistent with some of the major policy directions of the past 15-20 years. These include: normalization, integration, and least-restrictive alternatives; the unity and integrity of the family; the importance of opportunities for self-advocacy; the role of consumer consent and choice in consumer-professional relationships; the need for individualized services; the importance of the developmental model as a basis for service delivery; the value of economic productivity of people with disabilities; and the rights of habilitation, amelioration, and prevention. PMID:3156827

  6. Developing independence.

    PubMed

    Turnbull, A P; Turnbull, H R

    1985-03-01

    The transition from living a life as others want (dependence) to living it as the adolescent wants to live it (independence) is extraordinarily difficult for most teen-agers and their families. The difficulty is compounded in the case of adolescents with disabilities. They are often denied access to the same opportunities of life that are accessible to the nondisabled. They face special problems in augmenting their inherent capacities so that they can take fuller advantage of the accommodations that society makes in an effort to grant them access. In particular, they need training designed to increase their capacities to make, communicate, implement, and evaluate their own life-choices. The recommendations made in this paper are grounded in the long-standing tradition of parens patriae and enlightened paternalism; they seek to be deliberately and cautiously careful about the lives of adolescents with disabilities and their families. We based them on the recent tradition of anti-institutionalism and they are also consistent with some of the major policy directions of the past 15-20 years. These include: normalization, integration, and least-restrictive alternatives; the unity and integrity of the family; the importance of opportunities for self-advocacy; the role of consumer consent and choice in consumer-professional relationships; the need for individualized services; the importance of the developmental model as a basis for service delivery; the value of economic productivity of people with disabilities; and the rights of habilitation, amelioration, and prevention.

  7. Adult height, nutrition, and population health.

    PubMed

    Perkins, Jessica M; Subramanian, S V; Davey Smith, George; Özaltin, Emre

    2016-03-01

    In this review, the potential causes and consequences of adult height, a measure of cumulative net nutrition, in modern populations are summarized. The mechanisms linking adult height and health are examined, with a focus on the role of potential confounders. Evidence across studies indicates that short adult height (reflecting growth retardation) in low- and middle-income countries is driven by environmental conditions, especially net nutrition during early years. Some of the associations of height with health and social outcomes potentially reflect the association between these environmental factors and such outcomes. These conditions are manifested in the substantial differences in adult height that exist between and within countries and over time. This review suggests that adult height is a useful marker of variation in cumulative net nutrition, biological deprivation, and standard of living between and within populations and should be routinely measured. Linkages between adult height and health, within and across generations, suggest that adult height may be a potential tool for monitoring health conditions and that programs focused on offspring outcomes may consider maternal height as a potentially important influence.

  8. Explosive Flux Compression: 50 Years of Los Alamos Activities

    SciTech Connect

    Fowler, C.M.; Thomson, D.B.; Garn, W.B.

    1998-10-18

    Los Alamos flux compression activities are surveyed, mainly through references in view of space limitations. However, two plasma physics programs done with Sandia National Laboratory are discussed in more detail.

  9. Review of liquid metal heat pipe work at Los Alamos

    NASA Astrophysics Data System (ADS)

    Reid, Robert S.; Merrigan, Michael A.; Sena, J. Tom

    A survey of space-power related liquid metal heat pipe work at Los Alamos National Laboratory is presented. Heat pipe development at Los Alamos has been on-going since 1963. Heat pipes were initially developed for thermionic nuclear-electrical power production in space. Since then Los Alamos has developed liquid metal heat pipes for numerous applications related to high temperature systems in both the space and terrestrial environments. Some of these applications include thermionic electrical generators, thermoelectric energy conversion (both in-core and direct radiation), thermal energy storage, hypersonic vehicle leading edge cooling, and heat pipe vapor laser cells. Some of the work performed at Los Alamos has been documented in internal reports that are often little-known. A representative description and summary of progress in space-related liquid metal heat pipe technology is provided followed by a reference section citing sources where these works may be found.

  10. Review of liquid metal heat pipe work at Los Alamos

    SciTech Connect

    Reid, R.S.; Merrigan, M.A.; Sena, J.T. )

    1991-01-10

    A survey of space-power related liquid metal heat pipe work at Los Alamos National Laboratory is presented. Heat pipe development at Los Alamos has been on-going since 1963. Heat pipes were initially developed for thermionic nuclear-electrical power production in space. Since then Los Alamos has developed liquid metal heat pipes for numerous applications related to high temperature systems in both the space and terrestrial environments. Some of these applications include thermionic electrical generators, thermoelectric energy conversion (both in-core and direct radiation), thermal energy storage, hypersonic vehicle leading edge cooling, and heat pipe vapor laser cells. Some of the work performed at Los Alamos has been documented in internal reports that are often little-known. A representative description and summary of progress in space-related liquid metal heat pipe technology is provided followed by a reference section citing sources where these works may be found.

  11. Review of liquid metal heat pipe work at Los Alamos

    NASA Astrophysics Data System (ADS)

    Reid, Robert S.; Merrigan, Michael A.; Sena, J. Tom

    1991-01-01

    A survey of space-power related liquid metal heat pipe work at Los Alamos National Laboratory is presented. Heat pipe development at Los Alamos has been on-going since 1963. Heat pipes were initially developed for thermionic nuclear-electrical power production in space. Since then Los Alamos has developed liquid metal heat pipes for numerous applications related to high temperature systems in both the space and terrestrial environments. Some of these applications include thermionic electrical generators, thermoelectric energy conversion (both in-core and direct radiation), thermal energy storage, hypersonic vehicle leading edge cooling, and heat pipe vapor laser cells. Some of the work performed at Los Alamos has been documented in internal reports that are often little-known. A representative description and summary of progress in space-related liquid metal heat pipe technology is provided followed by a reference section citing sources where these works may be found.

  12. Review of liquid metal heat pipe work at Los Alamos

    NASA Astrophysics Data System (ADS)

    Reid, Robert S.; Merrigan, Michael A.; Sena, J. T.

    A survey of space-power related liquid metal heat pipe work at Los Alamos National Laboratory is presented. Heat pipe development at Los Alamos has been on-going since 1963. Heat pipes were initially developed for thermionic nuclear-electrical power production in space. Since then Los Alamos has developed liquid metal heat pipes for numerous applications related to high temperature systems in both the space and terrestrial environments. Some of these applications include thermionic electrical generators, thermoelectric energy conversion (both in-core and direct radiation), thermal energy storage, hypersonic vehicle leading edge cooling, and heat pipe vapor laser cells. Some of the work performed at Los Alamos has been documented in internal reports that are often little-known. A representative description and summary of progress in space-related liquid metal heat pipe technology is provided followed by reference section citing sources where these works may be found.

  13. Review of liquid metal heat pipe work at Los Alamos

    SciTech Connect

    Reid, R.S.; Merrigan, M.A.; Sena, J.T.

    1990-01-01

    A survey of space-power related liquid metal heat pipe work at Los Alamos National Laboratory is presented. Heat pipe development at Los Alamos has been on-going since 1963. Heat pipes were initially developed for thermionic nuclear-electrical power production in space. Since then Los Alamos has developed liquid metal heat pipes for numerous applications related to high temperature systems in both the space and terrestrial environments. Some of these applications include thermionic electrical generators, thermoelectric energy conversion (both in-core and direct radiation), thermal energy storage, hypersonic vehicle leading edge cooling, and heat pipe vapor laser cells. Some of the work performed at Los Alamos has been documented in internal reports that are often little-known. A representative description and summary of progress in space-related liquid metal heat pipe technology is provided followed by a reference section citing sources where these works may be found. 53 refs.

  14. Environmental Surveillance at Los Alamos during 2007

    SciTech Connect

    2008-09-30

    Environmental Surveillance at Los Alamos reports are prepared annually by the Los Alamos National Laboratory (the Laboratory) Environmental Directorate, as required by US Department of Energy Order 450.1, General Environmental Protection Program, and US Department of Energy Order 231.1A, Environment, Safety, and Health Reporting. These annual reports summarize environmental data that are used to determine compliance with applicable federal, state, and local environmental laws and regulations, executive orders, and departmental policies. Additional data, beyond the minimum required, are also gathered and reported as part of the Laboratory’s efforts to ensure public safety and to monitor environmental quality at and near the Laboratory. Chapter 1 provides an overview of the Laboratory’s major environmental programs and explains the risks and the actions taken to reduce risks at the Laboratory from environmental legacies and waste management operations. Chapter 2 reports the Laboratory’s compliance status for 2007. Chapter 3 provides a summary of the maximum radiological dose the public and biota populations could have potentially received from Laboratory operations and discusses chemical exposures. The environmental surveillance and monitoring data are organized by environmental media (Chapter 4, air; Chapters 5 and 6, water and sediments; Chapter 7, soils; and Chapter 8, foodstuffs and biota) in a format to meet the needs of a general and scientific audience. Chapter 9 provides a summary of the status of environmental restoration work around LANL. A glossary and a list of acronyms and abbreviations are in the back of the report. Appendix A explains the standards for environmental contaminants, Appendix B explains the units of measurements used in this report, Appendix C describes the laboratory’s technical areas and their associated programs, and Appendix D provides web links to more information. In printed copies of this report or Executive Summary, we have

  15. Strategic defense initiatives at Los Alamos National Laboratory

    SciTech Connect

    Rockwood, S.D.

    1985-01-01

    This presentation reviews the Strategic Defense Initiative (SDI) programs at Los Alamos National Laboratory, noting especially the needs for and applications of optics and optical technologies. Table I lists the various activities at Los Alamos contributing to SDI programs. The principal, nonnuclear SDI programs are: (1) the free-electron laser, and (2) neutral particle beams. Both should be considered as potential long-range-kill systems, but still in the futuristic category.

  16. Health, Height, Height Shrinkage, and SES at Older Ages: Evidence from China†

    PubMed Central

    Huang, Wei; Lei, Xiaoyan; Ridder, Geert; Strauss, John

    2015-01-01

    In this paper, we build on the literature that examines associations between height and health outcomes of the elderly. We investigate the associations of height shrinkage at older ages with socioeconomic status, finding that height shrinkage for both men and women is negatively associated with better schooling, current urban residence, and household per capita expenditures. We then investigate the relationships between pre-shrinkage height, height shrinkage, and a rich set of health outcomes of older respondents, finding that height shrinkage is positively associated with poor health outcomes across a variety of outcomes, being especially strong for cognition outcomes. PMID:26594311

  17. Los Alamos low-level waste performance assessment status

    SciTech Connect

    Wenzel, W.J.; Purtymun, W.D.; Dewart, J.M.; Rodgers, J.E.

    1986-06-01

    This report reviews the documented Los Alamos studies done to assess the containment of buried hazardous wastes. Five sections logically present the environmental studies, operational source terms, transport pathways, environmental dosimetry, and computer model development and use. This review gives a general picture of the Los Alamos solid waste disposal and liquid effluent sites and is intended for technical readers with waste management and environmental science backgrounds but without a detailed familiarization with Los Alamos. The review begins with a wide perspective on environmental studies at Los Alamos. Hydrology, geology, and meteorology are described for the site and region. The ongoing Laboratory-wide environmental surveillance and waste management environmental studies are presented. The next section describes the waste disposal sites and summarizes the current source terms for these sites. Hazardous chemical wastes and liquid effluents are also addressed by describing the sites and canyons that are impacted. The review then focuses on the transport pathways addressed mainly in reports by Healy and Formerly Utilized Sites Remedial Action Program. Once the source terms and potential transport pathways are described, the dose assessment methods are addressed. Three major studies, the waste alternatives, Hansen and Rogers, and the Pantex Environmental Impact Statement, contributed to the current Los Alamos dose assessment methodology. Finally, the current Los Alamos groundwater, surface water, and environmental assessment models for these mesa top and canyon sites are described.

  18. The Los Alamos high-brightness photoinjector

    SciTech Connect

    O'Shea, P.G.

    1991-01-01

    For a number of years Los Alamos National Laboratory has been developing photocathode RF guns for high-brightness electron beam applications such as free-electron lasers (FELs). Previously thermionic high-voltage guns have been the source of choice for the electron accelerators used to drive FELs. The performance of such FELs is severely limited by the emittance growth produced by the subharmonic bunching process and also by the low peak current of the source. In a photoinjector, a laser driven photocathode is placed directly in a high-gradient RF accelerating cavity. A photocathode allows unsurpassed control over the current, and the spatial and temporal profile of the beam. In addition the electrodeless emission'' avoids many of the difficulties associated with multi-electrode guns, i.e. the electrons are accelerated very rapidly to relativistic energies, and there are no electrodes to distort the accelerating fields. For the past two years we have been integrating a photocathode into our existing FEL facility by replacing our thermionic gun and subharmonic bunchers with a high-gradient 1.3 GHz photoinjector. The photoinjector, which is approximately 0.6 m in length, produces 6 MeV, 300 A, 15 ps linac, and accelerated to a final energy of 40 MeV. We have recently begun lasing at wavelengths near 3 {mu}m. 16 refs., 2 figs., 5 tabs.

  19. NIST--Los Alamos racetrack microtron status

    SciTech Connect

    Wilson, M.A.; Ayres, R.L.; Cutler, R.I.; Debenham, P.H.; Lindstrom, E.R.; Mohr, D.L.; Penner, S.; Rose, J.E.; Young, L.M.

    1988-01-01

    The NIST-Los Alamos Racetrack Microtron (RTM) is designed to deliver a low-emittance electron beam of up to 0.5 mA cw over an energy range of 17 MeV to 185 MeV. Fed by a 5 MeV injector, the RTM contains two 180/degree/ end magnets that recirculate the beam up to 15 times through a 12 MeV RF linac. The linac, which operates in a standing-wave mode at 2380 MHz, has been tested to nearly full RF power. At present, the injector has undergone beam tests, and the beam transport system is complete through the 12 MeV linac. A temporary beam line has been installed at the exit of one end magnet to measure the beam energy, energy spread, and emittance after one pass through the accelerator. Preliminary results indicate that the accelerated beam energy spread and emittance are within design goals. 4 refs., 7 figs.

  20. Historic Manhattan Project Sites at Los Alamos

    SciTech Connect

    McGehee, Ellen

    2014-05-22

    The Manhattan Project laboratory constructed at Los Alamos, New Mexico, beginning in 1943, was intended from the start to be temporary and to go up with amazing speed. Because most of those WWII-era facilities were built with minimal materials and so quickly, much of the original infrastructure was torn down in the late '40s and early '50s and replaced by more permanent facilities. However, a few key facilities remained, and are being preserved and maintained for historic significance. Four such sites are visited briefly in this video, taking viewers to V-Site, the buildings where the first nuclear explosive device was pre-assembled in preparation for the Trinity Test in Southern New Mexico. Included is another WWII area, Gun Site. So named because it was the area where scientists and engineers tested the so-called "gun method" of assembling nuclear materials -- the fundamental design of the Little Boy weapon that was eventually dropped on Hiroshima. The video also goes to Pajarito Site, home of the "Slotin Building" and "Pond Cabin." The Slotin Building is the place where scientist Louis Slotin conducted a criticality experiment that went awry in early 1946, leading to his unfortunate death, and the Pond Cabin served the team of eminent scientist Emilio Segre who did early chemistry work on plutonium that ultimately led to the Fat Man weapon.

  1. Expanded recycling at Los Alamos National Laboratory

    SciTech Connect

    Betschart, J.F.; Malinauskas, L.; Burns, M.

    1996-07-01

    The Pollution Prevention Program Office has increased recycling activities, reuse, and options to reduce the solid waste streams through streamlining efforts that applied best management practices. The program has prioritized efforts based on volume and economic considerations and has greatly increased Los Alamos National Laboratory`s (LANL`s) recycle volumes. The Pollution Prevention Program established and chairs a Solid Waste Management Solutions Group to specifically address and solve problems in nonradioactive, Resource Conservation and Recovery Act (RCRA), state-regulated, and sanitary and industrial waste streams (henceforth referred to as sanitary waste in this paper). By identifying materials with recycling potential, identifying best management practices and pathways to return materials for reuse, and introducing the concept and practice of {open_quotes}asset management,{open_quotes} the Group will divert much of the current waste stream from disposal. This Group is developing procedures, agreements, and contracts to stage, collect, sort, segregate, transport and process materials, and is also garnering support for the program through the involvement of upper management, facility managers, and generators.

  2. Historic Manhattan Project Sites at Los Alamos

    ScienceCinema

    McGehee, Ellen

    2016-07-12

    The Manhattan Project laboratory constructed at Los Alamos, New Mexico, beginning in 1943, was intended from the start to be temporary and to go up with amazing speed. Because most of those WWII-era facilities were built with minimal materials and so quickly, much of the original infrastructure was torn down in the late '40s and early '50s and replaced by more permanent facilities. However, a few key facilities remained, and are being preserved and maintained for historic significance. Four such sites are visited briefly in this video, taking viewers to V-Site, the buildings where the first nuclear explosive device was pre-assembled in preparation for the Trinity Test in Southern New Mexico. Included is another WWII area, Gun Site. So named because it was the area where scientists and engineers tested the so-called "gun method" of assembling nuclear materials -- the fundamental design of the Little Boy weapon that was eventually dropped on Hiroshima. The video also goes to Pajarito Site, home of the "Slotin Building" and "Pond Cabin." The Slotin Building is the place where scientist Louis Slotin conducted a criticality experiment that went awry in early 1946, leading to his unfortunate death, and the Pond Cabin served the team of eminent scientist Emilio Segre who did early chemistry work on plutonium that ultimately led to the Fat Man weapon.

  3. Saving Water at Los Alamos National Laboratory

    SciTech Connect

    Erickson, Andy

    2015-03-16

    Los Alamos National Laboratory decreased its water usage by 26 percent in 2014, with about one-third of the reduction attributable to using reclaimed water to cool a supercomputing center. The Laboratory's goal during 2014 was to use only re-purposed water to support the mission at the Strategic Computing Complex. Using reclaimed water from the Sanitary Effluent Reclamation Facility, or SERF, substantially decreased water usage and supported the overall mission. SERF collects industrial wastewater and treats it for reuse. The reclamation facility contributed more than 27 million gallons of re-purposed water to the Laboratory's computing center, a secured supercomputing facility that supports the Laboratory’s national security mission and is one of the institution’s larger water users. In addition to the strategic water reuse program at SERF, the Laboratory reduced water use in 2014 by focusing conservation efforts on areas that use the most water, upgrading to water-conserving fixtures, and repairing leaks identified in a biennial survey.

  4. 47 CFR 95.51 - Antenna height.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 5 2011-10-01 2011-10-01 false Antenna height. 95.51 Section 95.51... SERVICES General Mobile Radio Service (GMRS) § 95.51 Antenna height. (a) Certain antenna structures used in... this chapter. (b) The antenna for a small base station or for a small control station must not be...

  5. 47 CFR 95.51 - Antenna height.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 5 2014-10-01 2014-10-01 false Antenna height. 95.51 Section 95.51... SERVICES General Mobile Radio Service (GMRS) § 95.51 Antenna height. (a) Certain antenna structures used in... this chapter. (b) The antenna for a small base station or for a small control station must not be...

  6. 47 CFR 95.51 - Antenna height.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Antenna height. 95.51 Section 95.51... SERVICES General Mobile Radio Service (GMRS) § 95.51 Antenna height. (a) Certain antenna structures used in... this chapter. (b) The antenna for a small base station or for a small control station must not be...

  7. 47 CFR 95.51 - Antenna height.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 5 2012-10-01 2012-10-01 false Antenna height. 95.51 Section 95.51... SERVICES General Mobile Radio Service (GMRS) § 95.51 Antenna height. (a) Certain antenna structures used in... this chapter. (b) The antenna for a small base station or for a small control station must not be...

  8. 47 CFR 95.51 - Antenna height.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 5 2013-10-01 2013-10-01 false Antenna height. 95.51 Section 95.51... SERVICES General Mobile Radio Service (GMRS) § 95.51 Antenna height. (a) Certain antenna structures used in... this chapter. (b) The antenna for a small base station or for a small control station must not be...

  9. Height and Weight of Children: United States.

    ERIC Educational Resources Information Center

    Hamill, Peter V. V.; And Others

    This report contains national estimates based on findings from the Health Examination Survey in 1963-65 on height and weight measurements of children 6- to 11-years-old. A nationwide probability sample of 7,119 children was selected to represent the noninstitutionalized children (about 24 million) in this age group. Height was obtained in stocking…

  10. Raman lidar/AERI PBL Height Product

    DOE Data Explorer

    Ferrare, Richard

    2012-12-14

    Planetary Boundary Layer (PBL) heights have been computed using potential temperature profiles derived from Raman lidar and AERI measurements. Raman lidar measurements of the rotational Raman scattering from nitrogen and oxygen are used to derive vertical profiles of potential temperature. AERI measurements of downwelling radiance are used in a physical retrieval approach (Smith et al. 1999, Feltz et al. 1998) to derive profiles of temperature and water vapor. The Raman lidar and AERI potential temperature profiles are merged to create a single potential temperature profile for computing PBL heights. PBL heights were derived from these merged potential temperature profiles using a modified Heffter (1980) technique that was tailored to the SGP site (Della Monache et al., 2004). PBL heights were computed on an hourly basis for the period January 1, 2009 through December 31, 2011. These heights are provided as meters above ground level.

  11. New geochronologic and stratigraphic evidence confirms the paleocene age of the dinosaur-bearing ojo alamo sandstone and animas formation in the San Juan Basin, New Mexico and Colorado

    USGS Publications Warehouse

    Fassett, J.E.

    2009-01-01

    Dinosaur fossils are present in the Paleocene Ojo Alamo Sandstone and Animas Formation in the San Juan Basin, New Mexico, and Colorado. Evidence for the Paleo-cene age of the Ojo Alamo Sandstone includes palynologic and paleomagnetic data. Palynologic data indicate that the entire Ojo Alamo Sandstone, including the lower dinosaur-bearing part, is Paleocene in age. All of the palynomorph-productive rock samples collected from the Ojo Alamo Sandstone at multiple localities lacked Creta-ceous index palynomorphs (except for rare, reworked specimens) and produced Paleocene index palynomorphs. Paleocene palynomorphs have been identified strati-graphically below dinosaur fossils at two separate localities in the Ojo Alamo Sand-stone in the central and southern parts of the basin. The Animas Formation in the Colorado part of the basin also contains dinosaur fossils, and its Paleocene age has been established based on fossil leaves and palynology. Magnetostratigraphy provides independent evidence for the Paleocene age of the Ojo Alamo Sandstone and its dinosaur-bearing beds. Normal-polarity magnetochron C29n (early Paleocene) has been identified in the Ojo Alamo Sandstone at six localities in the southern part of the San Juan Basin. An assemblage of 34 skeletal elements from a single hadrosaur, found in the Ojo Alamo Sandstone in the southern San Juan Basin, provided conclusive evidence that this assemblage could not have been reworked from underlying Cretaceous strata. In addition, geochemical studies of 15 vertebrate bones from the Paleocene Ojo Alamo Sandstone and 15 bone samples from the underlying Kirtland Formation of Late Creta-ceous (Campanian) age show that each sample suite contained distinctly different abundances of uranium and rare-earth elements, indicating that the bones were miner-alized in place soon after burial, and that none of the Paleocene dinosaur bones ana-lyzed had been reworked. ?? U.S. Geological Survey, Public Domain April 2009.

  12. Development and Evaluation of Models for the Relationship between Tree Height and Diameter at Breast Height for Chinese-Fir Plantations in Subtropical China.

    PubMed

    Li, Yan-qiong; Deng, Xiang-wen; Huang, Zhi-hong; Xiang, Wen-hua; Yan, Wen-de; Lei, Pi-feng; Zhou, Xiao-lu; Peng, Chang-hui

    2015-01-01

    Tree diameter at breast height (dbh) and height are the most important variables used in forest inventory and management as well as forest carbon-stock estimation. In order to identify the key stand variables that influence the tree height-dbh relationship and to develop and validate a suit of models for predicting tree height, data from 5961 tree samples aged from 6 years to 53 years and collected from 80 Chinese-fir plantation plots were used to fit 39 models, including 33 nonlinear models and 6 linear models, were developed and evaluated into two groups. The results showed that composite models performed better in height estimate than one-independent-variable models. Nonlinear composite Model 34 and linear composite Model 6 were recommended for predicting tree height in Chinese fir plantations with a dbh range between 4 cm and 40 cm when the dbh data for each tree and the quadratic mean dbh of the stand (Dq) and mean height of the stand (Hm) were available. Moreover, Hm could be estimated by using the formula Hm = 11.707 × l n(Dq)-18.032. Clearly, Dq was the primary stand variable that influenced the height-dbh relationship. The parameters of the models varied according to stand age and site. The inappropriate application of provincial or regional height-dbh models for predicting small tree height at local scale may result in larger uncertainties. The method and the recommended models developed in this study were statistically reliable for applications in growth and yield estimation for even-aged Chinese-fir plantation in Huitong and Changsha. The models could be extended to other regions and to other tree species only after verification in subtropical China.

  13. Development and Evaluation of Models for the Relationship between Tree Height and Diameter at Breast Height for Chinese-Fir Plantations in Subtropical China.

    PubMed

    Li, Yan-qiong; Deng, Xiang-wen; Huang, Zhi-hong; Xiang, Wen-hua; Yan, Wen-de; Lei, Pi-feng; Zhou, Xiao-lu; Peng, Chang-hui

    2015-01-01

    Tree diameter at breast height (dbh) and height are the most important variables used in forest inventory and management as well as forest carbon-stock estimation. In order to identify the key stand variables that influence the tree height-dbh relationship and to develop and validate a suit of models for predicting tree height, data from 5961 tree samples aged from 6 years to 53 years and collected from 80 Chinese-fir plantation plots were used to fit 39 models, including 33 nonlinear models and 6 linear models, were developed and evaluated into two groups. The results showed that composite models performed better in height estimate than one-independent-variable models. Nonlinear composite Model 34 and linear composite Model 6 were recommended for predicting tree height in Chinese fir plantations with a dbh range between 4 cm and 40 cm when the dbh data for each tree and the quadratic mean dbh of the stand (Dq) and mean height of the stand (Hm) were available. Moreover, Hm could be estimated by using the formula Hm = 11.707 × l n(Dq)-18.032. Clearly, Dq was the primary stand variable that influenced the height-dbh relationship. The parameters of the models varied according to stand age and site. The inappropriate application of provincial or regional height-dbh models for predicting small tree height at local scale may result in larger uncertainties. The method and the recommended models developed in this study were statistically reliable for applications in growth and yield estimation for even-aged Chinese-fir plantation in Huitong and Changsha. The models could be extended to other regions and to other tree species only after verification in subtropical China. PMID:25905458

  14. Shock Formation Height in the Solar Corona Estimated from SDO and Radio Observations

    NASA Technical Reports Server (NTRS)

    Gopalswamy, N.; Nitta, N.

    2011-01-01

    Wave transients at EUV wavelengths and type II radio bursts are good indicators of shock formation in the solar corona. We use recent EUV wave observations from SDO and combine them with metric type II radio data to estimate the height in the corona where the shocks form. We compare the results with those obtained from other methods. We also estimate the shock formation heights independently using white-light observations of coronal mass ejections that ultimately drive the shocks.

  15. Seat height in handrim wheelchair propulsion.

    PubMed

    van der Woude, L H; Veeger, D J; Rozendal, R H; Sargeant, T J

    1989-01-01

    To study the effect of seat height on the cardiorespiratory system and kinematics in handrim wheelchair ambulation, nine non-wheelchair users participated in a wheelchair exercise experiment on a motor-driven treadmill. The subjects conducted five progressive exercise tests. After an initial try-out test, four tests were performed at different standardized seat heights of 100, 120, 140, and 160 degrees elbow extension (subject sitting erect, hands on the rim in top-dead-center = 12.00 hrs; full extension = 180 degrees). Each test consisted of four 3-minute exercise blocks at speeds of respectively 0.55, 0.83, 1.11, and 1.39 m.s-1 (2-5 km.hr-1). Analysis of variance revealed significant effects of seat height (P less than 0.05) on gross mechanical efficiency (ME), oxygen cost, push range, and push duration, and on the ranges of motion in the different arm segments and trunk. Mean ME appeared higher at the lower seat heights of 100 and 120 degrees elbow extension. This is reflected in an enhanced oxygen consumption at seat heights of 140 and 160 degrees elbow extension. Simultaneously, the push range showed a 15 to 20 degree decrease with increasing seat height, which is reflected in a decreased push duration. In the push phase, decreases in retroflexion and abduction/adduction of the upper arm were seen. The trunk shifted further forward, and the motion range in the elbow joint shifted to extension with increasing seat height. No shifts in minimum and maximum angular velocities were seen with increasing seat height. The results showed an interrelationship between wheelchair seat height and both cardiorespiratory and kinematic parameters. With respect to the cardiorespiratory system, the optimization of the wheelchair geometry, based on functional characteristics of the user, appears beneficial.

  16. Recent UCN source developments at Los Alamos

    SciTech Connect

    Seestrom, S.J.; Anaya, J.M.; Bowles, T.J.

    1998-12-01

    The most intense sources of ultra cold neutrons (UCN) have bee built at reactors where the high average thermal neutron flux can overcome the low UCN production rate to achieve usable densities of UCN. At spallation neutron sources the average flux available is much lower than at a reactor, though the peak flux can be comparable or higher. The authors have built a UCN source that attempts to take advantage of the high peak flux available at the short pulse spallation neutron source at the Los Alamos Neutron Science Center (LANSCE) to generate a useful number of UCN. In the source UCN are produced by Doppler-shifted Bragg scattering of neutrons to convert 400-m/s neutrons down into the UCN regime. This source was initially tested in 1996 and various improvements were made based on the results of the 1996 running. These improvements were implemented and tested in 1997. In sections 2 and 3 they discuss the improvements that have been made and the resulting source performance. Recently an even more interesting concept was put forward by Serebrov et al. This involves combining a solid Deuterium UCN source, previously studied by Serebrov et al., with a pulsed spallation source to achieve world record UCN densities. They have initiated a program of calculations and measurements aimed at verifying the solid Deuterium UCN source concept. The approach has been to develop an analytical capability, combine with Monte Carlo calculations of neutron production, and perform benchmark experiments to verify the validity of the calculations. Based on the calculations and measurements they plan to test a modified version of the Serebrov UCN factory. They estimate that they could produce over 1,000 UCN/cc in a 15 liter volume, using 1 {micro}amp of 800 MeV protons for two seconds every 500 seconds. They will discuss the result UCN production measurements in section 4.

  17. Waste characterization at Los Alamos National Laboratory

    SciTech Connect

    Corpion, J.C.; Grieggs, A.R.

    1991-01-01

    Most industries generate limited types of solid wastes of a result of their manufacturing processes. The Los Alamos National Laboratory (LANL), a research and development facility, generates a large variety of solid wastes, some exotic. Over 50,000 distinct waste streams are currently generated in the 43 square mile area defining LANL. These wastes include refuse, medical, infectious, hazardous, radioactive, and mixed wastes. LANL is subject to federal and State oversight on matters concerning management of solid wastes. In order to assure regulatory agencies such as the New Mexico Environment Department (NMED) and the US Environmental Protection Agency (EPA) that the Laboratory is properly managing and disposing all solid wastes. LANL has undertaken an extensive waste characterization program to identify sources and ultimate disposition of all solid wastes. Given the number of solid waste streams expected, LANL has taken a two-pronged approach to characterizing wastes: (a) physical identification of all sources of solid wastes including interviews with waste generators; and (b) characterization of wastes from the point of generation. The former approach consists of canvassing all structures within the LANL complex, interviewing waste generators, and identifying sources of waste generation. Data gathered by these interviews are compiled in a database in order to identify the types and rates of waste generation and correct mismanagement of wastes identified during the interviews. The latter approach consists of characterizing all solid wastes which are controlled administratively or subject to stricter controls than municipal solid wastes (i.e., infectious, hazardous, radioactive, and mixed wastes). This characterization forms the basis by which LANL will manage solid waste in accordance to NMED/EPA regulations and US Department of Energy Orders. 8 refs., 3 figs.

  18. Low Melt Height Solidification of Superalloys

    NASA Astrophysics Data System (ADS)

    Montakhab, Mehdi; Bacak, Mert; Balikci, Ercan

    2016-06-01

    Effect of a reduced melt height in the directional solidification of a superalloy has been investigated by two methods: vertical Bridgman (VB) and vertical Bridgman with a submerged baffle (VBSB). The latter is a relatively new technique and provides a reduced melt height ahead of the solidifying interface. A low melt height leads to a larger primary dendrite arm spacing but a lower mushy length, melt-back transition length, and porosity. The VBSB technique yields up to 38 pct reduction in the porosity. This may improve a component's mechanical strength especially in a creep-fatigue type dynamic loading.

  19. Mixing-Height Time Series from Operational Ceilometer Aerosol-Layer Heights

    NASA Astrophysics Data System (ADS)

    Lotteraner, Christoph; Piringer, Martin

    2016-07-01

    A new method is described to derive mixing-height time series directly from aerosol-layer height data available from a Vaisala CL51 ceilometer. As complete as possible mixing-height time series are calculated by avoiding outliers, filling data gaps by linear interpolation, and smoothing. In addition, large aerosol-layer heights at night that can be interpreted as residual layers are not assigned as mixing heights. The resulting mixing-height time series, converted to an appropriate data format, can be used as input for dispersion calculations. Two case examples demonstrate in detail how the method works. The mixing heights calculated using ceilometer data are compared with values determined from radiosounding data at Vienna by applying the parcel, Heffter, and Richardson methods. The results of the parcel method, obtained from radiosonde profiles at noon, show the best fit to the ceilometer-derived mixing heights. For midnight radiosoundings, larger deviations between mixing heights from the ceilometer and those deduced from the potential temperature profiles of the soundings are found. We use data from two Vaisala CL51 ceilometers, operating in the Vienna area at an urban and rural site, respectively, during an overlapping period of about 1 year. In addition to the case studies, the calculated mixing-height time series are also statistically evaluated and compared, demonstrating that the ceilometer-based mixing height follows an expected daily and seasonal course.

  20. Mixing-Height Time Series from Operational Ceilometer Aerosol-Layer Heights

    NASA Astrophysics Data System (ADS)

    Lotteraner, Christoph; Piringer, Martin

    2016-11-01

    A new method is described to derive mixing-height time series directly from aerosol-layer height data available from a Vaisala CL51 ceilometer. As complete as possible mixing-height time series are calculated by avoiding outliers, filling data gaps by linear interpolation, and smoothing. In addition, large aerosol-layer heights at night that can be interpreted as residual layers are not assigned as mixing heights. The resulting mixing-height time series, converted to an appropriate data format, can be used as input for dispersion calculations. Two case examples demonstrate in detail how the method works. The mixing heights calculated using ceilometer data are compared with values determined from radiosounding data at Vienna by applying the parcel, Heffter, and Richardson methods. The results of the parcel method, obtained from radiosonde profiles at noon, show the best fit to the ceilometer-derived mixing heights. For midnight radiosoundings, larger deviations between mixing heights from the ceilometer and those deduced from the potential temperature profiles of the soundings are found. We use data from two Vaisala CL51 ceilometers, operating in the Vienna area at an urban and rural site, respectively, during an overlapping period of about 1 year. In addition to the case studies, the calculated mixing-height time series are also statistically evaluated and compared, demonstrating that the ceilometer-based mixing height follows an expected daily and seasonal course.

  1. Estimating Mixing Heights Using Microwave Temperature Profiler

    NASA Technical Reports Server (NTRS)

    Nielson-Gammon, John; Powell, Christina; Mahoney, Michael; Angevine, Wayne

    2008-01-01

    A paper describes the Microwave Temperature Profiler (MTP) for making measurements of the planetary boundary layer thermal structure data necessary for air quality forecasting as the Mixing Layer (ML) height determines the volume in which daytime pollution is primarily concentrated. This is the first time that an airborne temperature profiler has been used to measure the mixing layer height. Normally, this is done using a radar wind profiler, which is both noisy and large. The MTP was deployed during the Texas 2000 Air Quality Study (TexAQS-2000). An objective technique was developed and tested for estimating the ML height from the MTP vertical temperature profiles. In order to calibrate the technique and evaluate the usefulness of this approach, estimates from a variety of measurements during the TexAQS-2000 were compared. Estimates of ML height were used from radiosondes, radar wind profilers, an aerosol backscatter lidar, and in-situ aircraft measurements in addition to those from the MTP.

  2. Evolutionary perspectives on human height variation.

    PubMed

    Stulp, Gert; Barrett, Louise

    2016-02-01

    Human height is a highly variable trait, both within and between populations, has a high heritability, and influences the manner in which people behave and are treated in society. Although we know much about human height, this information has rarely been brought together in a comprehensive, systematic fashion. Here, we present a synthetic review of the literature on human height from an explicit evolutionary perspective, addressing its phylogenetic history, development, and environmental and genetic influences on growth and stature. In addition to presenting evidence to suggest the past action of natural selection on human height, we also assess the evidence that natural and sexual selection continues to act on height in contemporary populations. Although there is clear evidence to suggest that selection acts on height, mainly through life-history processes but perhaps also directly, it is also apparent that methodological factors reduce the confidence with which such inferences can be drawn, and there remain surprising gaps in our knowledge. The inability to draw firm conclusions about the adaptiveness of such a highly visible and easily measured trait suggests we should show an appropriate degree of caution when dealing with other human traits in evolutionary perspective. PMID:25530478

  3. Hierarchical control of ride height system for electronically controlled air suspension based on variable structure and fuzzy control theory

    NASA Astrophysics Data System (ADS)

    Xu, Xing; Zhou, Kongkang; Zou, Nannan; Jiang, Hong; Cui, Xiaoli

    2015-09-01

    The current research of air suspension mainly focuses on the characteristics and design of the air spring. In fact, electronically controlled air suspension (ECAS) has excellent performance in flexible height adjustment during different driving conditions. However, the nonlinearity of the ride height adjusting system and the uneven distribution of payload affect the control accuracy of ride height and the body attitude. Firstly, the three-point measurement system of three height sensors is used to establish the mathematical model of the ride height adjusting system. The decentralized control of ride height and the centralized control of body attitude are presented to design the ride height control system for ECAS. The exact feedback linearization method is adopted for the nonlinear mathematical model of the ride height system. Secondly, according to the hierarchical control theory, the variable structure control (VSC) technique is used to design a controller that is able to adjust the ride height for the quarter-vehicle anywhere, and each quarter-vehicle height control system is independent. Meanwhile, the three-point height signals obtained by three height sensors are tracked to calculate the body pitch and roll attitude over time, and then by calculating the deviation of pitch and roll and its rates, the height control correction is reassigned based on the fuzzy algorithm. Finally, to verify the effectiveness and performance of the proposed combined control strategy, a validating test of ride height control system with and without road disturbance is carried out. Testing results show that the height adjusting time of both lifting and lowering is over 5 s, and the pitch angle and the roll angle of body attitude are less than 0.15°. This research proposes a hierarchical control method that can guarantee the attitude stability, as well as satisfy the ride height tracking system.

  4. 1993 Northern goshawk inventory on portions of Los Alamos National Laboratory, Los Alamos, NM. Final report

    SciTech Connect

    Sinton, D.T.; Kennedy, P.L.

    1994-06-01

    Northern goshawks (Accipiter gentilis) (hereafter referred to as goshawk) is a large forest dwelling hawk. Goshawks may be declining in population and reproduction in the southwestern United States. Reasons for the possible decline in goshawk populations include timber harvesting resulting in the loss of nesting habitat, toxic chemicals, and the effects of drought, fire, and disease. Thus, there is a need to determine their population status and assess impacts of management activities in potential goshawk habitat. Inventory for the goshawk was conducted on 2,254 ha of Los Alamos National Laboratory (LANL) to determine the presence of nesting goshawks on LANL lands. This information can be incorporated into LANL`s environmental management program. The inventory was conducted by Colorado State University personnel from May 12 to July 30, 1993. This report summarizes the results of this inventory.

  5. Integrated review software advances at Los Alamos

    SciTech Connect

    Klosterbuer, S. F.; Michel, K. D.; Betts, S. E.; Determan, J. C.; Longo, J. F.; Parker, R. F.; Pelowitz, D. G.; Rothrock, R. B.; Schneider, C. M.; Nordquist, H. M.

    2004-01-01

    Since 1988, Los Alamos National Laboratory (LANL) has been developing software for unattended monitoring systems. These systems are composed of three categories of software: acquisition, collection and review. The data acquisition software is contained in modular instrumentation distributed throughout facilities to continuously acquire data from devices ranging from radiation detectors to cameras to binary switches. The data collection software runs on computers connected to the instruments and offloads and stores the acquired data. The review software enables the end user to quickly and easily examine the data collected from these different systems and compare the results to declared operator activities. This paper addresses the review software. The original standalone review software processed only radiation data. This software was expanded to include new programs (tools) to display and correlate video and operator declarations and added an interface to the standard neutron coincidence counter analysis program. This expanded review software containing multiple review tools is referred to collectively as the Integrated Review Software (IRS). The IRS continues to expand and evolve. Two primary IRS developments will be described in this paper. First, the IRS was expanded to include review tools to display and analyze new data types. Position Review was developed to display Global Positioning System (GPS) location data to aid in tracking radiation movements. Isotopic Review is being developed to provide a link to the standard gamma isotopic analysis software. In addition significant enhancements are being added to the existing review tools such as Operator Review, Radiation Review and Digital Video Review. A second IRS development is to produce standardized components with published interfaces enabling other parties to produce custom components that plug into review software. It is anticipated that there will be four primary types of components that could be

  6. Water Supply at Los Alamos 1998-2001

    SciTech Connect

    Richard J. Koch; David B. Rogers

    2003-03-01

    For the period 1998 through 2001, the total water used at Los Alamos from all sources ranged from 1325 million gallons (Mg) in 1999 to 1515 Mg in 2000. Groundwater production ranged from 1323 Mg in 1999 to 1506 Mg in 2000 from the Guaje, Pajarito, and Otowi fields. Nonpotable surface water used from Los Alamos reservoir ranged from zero gallons in 2001 to 9.3 Mg in 2000. For years 1998 through 2001, over 99% of all water used at Los Alamos was groundwater. Water use by Los Alamos National Laboratory (LANL) between 1998 and 2001 ranged from 379 Mg in 2000 to 461 Mg in 1998. The LANL water use in 2001 was 393 Mg or 27% of the total water use at Los Alamos. Water use by Los Alamos County ranged from 872 Mg in 1999 to 1137 Mg in 2000, and averaged 1006 Mg/yr. Four new replacement wells in the Guaje field (G-2A, G-3A, G-4A, and G-5A) were drilled in 1998 and began production in 1999; with existing well G-1A, the Guaje field currently has five producing wells. Five of the old Guaje wells (G-1, G-2, G-4, G-5, and G-6) were plugged and abandoned in 1999, and one well (G-3) was abandoned but remains as an observation well for the Guaje field. The long-term water level observations in production and observation (test) wells at Los Alamos are consistent with the formation of a cone of depression in response to water production. The water level decline is gradual and at most has been about 0.7 to 2 ft per year for production wells and from 0.4 to 0.9 ft/yr for observation (test) wells. The largest water level declines have been in the Guaje field where nonpumping water levels were about 91 ft lower in 2001 than in 1951. The initial water levels of the Guaje replacement wells were 32 to 57 ft lower than the initial water levels of adjacent original Guaje wells. When production wells are taken off-line for pump replacement or repair, water levels have returned to within about 25 ft of initial static levels within 6 to 12 months. Thus, the water-level trends suggest no adverse

  7. A progress report on UNICOS misuse detection at Los Alamos

    SciTech Connect

    Thompson, J.L.; Jackson, K.A.; Stallings, C.A.; Simmonds, D.D.; Siciliano, C.L.B.; Pedicini, G.A.

    1995-10-01

    An effective method for detecting computer misuse is the automatic monitoring and analysis of on-line user activity. During the past year, Los Alamos enhanced its Network Anomaly Detection and Intrusion Reporter (NADIR) to include analysis of user activity on Los Alamos` UNICOS Crays. In near real-time, NADIR compares user activity to historical profiles and tests activity against expert rules. The expert rules express Los Alamos` security policy and define improper or suspicious behavior. NADIR reports suspicious behavior to security auditors and provides tools to aid in follow-up investigations. This paper describes the implementation to date of the UNICOS component of NADIR, along with the operational experiences and future plans for the system.

  8. Publications of Los Alamos research, 1977-1981

    SciTech Connect

    Sheridan, C.J.; Garcia, C.A.

    1983-03-01

    This bibliography is a compilation of unclassified publications of work done at the Los Alamos National Laboratory for 1977-1981. Papers published in those years are included regardless of when they were actually written. Publications received too late for inclusion in earlier compilations have also been listed. Declassification of previously classified reports is considered to constitute publication. All classified issuances are omitted - even those papers, themselves unclassified, which were published only as part of a classified document. If a paper was published more than once, all places of publication are included. The bibliography includes Los Alamos National Laboratory reports, papers released as non-Laboratory reports, journal articles, books, chapters of books, conference papers either published separately or as part of conference proceedings issued as books or reports, papers published in congressional hearings, theses, and US patents. Publications by Los Alamos authors that are not records of Laboratory-sponsored work are included when the Library becomes aware of them.

  9. Love and fear of heights: the pathophysiology and psychology of height imbalance.

    PubMed

    Salassa, John R; Zapala, David A

    2009-01-01

    Individual psychological responses to heights vary on a continuum from acrophobia to height intolerance, height tolerance, and height enjoyment. This paper reviews the English literature and summarizes the physiologic and psychological factors that generate different responses to heights while standing still in a static or motionless environment. Perceptual cues to height arise from vision. Normal postural sway of 2 cm for peripheral objects within 3 m increases as eye-object distance increases. Postural sway >10 cm can result in a fall. A minimum of 20 minutes of peripheral retinal arc is required to detect motion. Trigonometry dictates that a 20-minute peripheral retinal arch can no longer be achieved in a standing position at an eye-object distance of >20 m. At this distance, visual cues conflict with somatosensory and vestibular inputs, resulting in variable degrees of imbalance. Co-occurring deficits in the visual, vestibular, and somatosensory systems can significantly increase height imbalance. An individual's psychological makeup, influenced by learned and genetic factors, can influence reactions to height imbalance. Enhancing peripheral vision and vestibular, proprioceptive, and haptic functions may improve height imbalance. Psychotherapy may improve the troubling subjective sensations to heights.

  10. Recovery of orthometric heights from ellipsoidal heights using offsets method over Japan

    NASA Astrophysics Data System (ADS)

    Odera, Patroba Achola; Fukuda, Yoichi

    2015-08-01

    One of the most important applications of a geoid model is a recovery of orthometric heights from ellipsoidal heights (normally obtained from GNSS). The application of the geoid model for recovering orthometric heights from ellipsoidal heights is normally achieved by fitting the geoid model to a local vertical datum. The fitting procedure is usually accomplished by least squares collocation (LSC), using planar or spherical covariance functions. This procedure warps the gravimetric geoid model onto the local vertical datum, hence the local geoid model derived by this procedure, though convenient for local applications, it is not an equipotential surface. We propose offsets method for practical orthometric height recovery from a geoid model. The proposed procedure is more realistic because it does not constrain the local geoid to be coincident to the local vertical datum. We compare the performance of plannar fitting and offsets methods over Japan using a cross-validation procedure. Results show that offsets method performs better than the normally used planar fitting in the recovery of orthometric heights from ellipsoidal heights using a geoid model. The standard deviations of the differences between established and converted orthometric heights at randomly selected GPS/levelling test points over Japan are ±4 and ±3 cm for planar fitting and offsets methods, respectively. The offsets method is therefore more appropriate for converting ellipsoidal heights to orthometric heights than the planar fitting in the area of study.

  11. Water supply at Los Alamos during 1993. Progress report

    SciTech Connect

    Purtymun, W.D.; Stoker, A.K.; McLin, S.G.; Maes, M.N.; Glasco, T.A.

    1995-10-01

    This report summarizes production and aquifer conditions for water wells in the Guaje, Pajarito, and Otowi Well Fields. These wells supplied all of the potable water used for municipal and some industrial purposes in Los Alamos County and the Los Alamos National Laboratory during 1993. The wells in the Los Alamos Well Field were transferred to San Ildefonso Pueblo in 1992. Four of the wells in the Los Alamos Well Field were plugged in 1993. One of the two new wells in the Otowi Well Field became operational in 1993. The spring gallery in Water Canyon supplied nonpotable water for industrial use, while surface water from the Los Alamos Reservoir was diverted for irrigation. In 1993 no water was used from the Guaje Reservoir. Due to the maintenance and operating cost of diverting water from the reservoirs, it is not economically feasible to continue their use for irrigation. This report fulfills some of the requirements of the Los Alamos Groundwater Protection Management Program by documenting use of the groundwater for water supply and providing information hydrologic characteristics of the main aquifer. This report is a joint effort between the Laboratory Water Quality and Hydrology Group and the Utilities Department of Johnson Controls World Services Inc. (JCI). The purpose of this report is to ensure a continuing historical record and to provide guidance for management of water resources in long-range planning for the water supply system. We have issued one summary report for the period of 1947 to 1971 and 22 annual reports that contain the results of our studies of these water supplies. An additional report summarized the hydrology of the main aquifer with reference to future development of groundwater supplies. A report was issued in 1988 that examined the status of wells and future water supply.

  12. Destructive analysis capabilities for plutonium and uranium characterization at Los Alamos National Laboratory

    SciTech Connect

    Tandon, Lav; Kuhn, Kevin J; Drake, Lawrence R; Decker, Diana L; Walker, Laurie F; Colletti, Lisa M; Spencer, Khalil J; Peterson, Dominic S; Herrera, Jaclyn A; Wong, Amy S

    2010-01-01

    Los Alamos National Laboratory's (LANL) Actinide Analytical Chemistry (AAC) group has been in existence since the Manhattan Project. It maintains a complete set of analytical capabilities for performing complete characterization (elemental assay, isotopic, metallic and non metallic trace impurities) of uranium and plutonium samples in different forms. For a majority of the customers there are strong quality assurance (QA) and quality control (QC) objectives including highest accuracy and precision with well defined uncertainties associated with the analytical results. Los Alamos participates in various international and national programs such as the Plutonium Metal Exchange Program, New Brunswick Laboratory's (NBL' s) Safeguards Measurement Evaluation Program (SME) and several other inter-laboratory round robin exercises to monitor and evaluate the data quality generated by AAC. These programs also provide independent verification of analytical measurement capabilities, and allow any technical problems with analytical measurements to be identified and corrected. This presentation will focus on key analytical capabilities for destructive analysis in AAC and also comparative data between LANL and peer groups for Pu assay and isotopic analysis.

  13. 2nd Annual Los Alamos Plutonium Metal Standard Exchange Workshop : "preliminary" results

    SciTech Connect

    Tandon, L.; Slemmons, A. K.

    2002-01-01

    The Rocky Flats Plutonium (Pu) Metal Sample Exchange program was conducted to insure the quality and intercomparability of measurements such as Pu assay, Pu isotopics, and impurity analyses. This program was discontinued in 1989 after more than 30 years. Los Alamos National Laboratory (LANL) has reestablished the Pu metal exchange program. During the first year, five DOE facilities, Argonne East, Argonne West, Livermore, Los Alamos, and New Brunswick Laboratory, Savannah River and the Atomic Weapons Establishment (AWE)' at Aldermaston are participating in the program. Plutonium metal samples are being prepared and distributed to the various sites primarily for destructive measurements for elemental concentration, isotopic abundance, and both metallic and nonmetallic impurity levels. The program is intended to provide independent verification of analytical measurement capability for each participating facility and to allow problems to be identified. Significants achievements in FY02 will be described. Results from category 1 elements and comparisons with Rocky Flats standards exchange metal historical data will also be presented. The roles and responsibilities of LANL and the external laboratories have been defined.

  14. The development of the atomic bomb, Los Alamos

    SciTech Connect

    Seidel, R.W.

    1993-11-01

    The historical presentation begins with details of the selection of Los Alamos as the site of the Army installation. Wartime efforts of the Army Corps of Engineers, and scientists to include the leader of Los Alamos, Robert Oppenheimer are presented. The layout and construction of the facilities are discussed. The monumental design requirements of the bombs are discussed, including but not limited to the utilization of the second choice implosion method of detonation, and the production of bomb-grade nuclear explosives. The paper ends with a philosophical discussion on the use of nuclear weapons.

  15. Los Alamos Using Neutrons to Stop Nuclear Smugglers

    ScienceCinema

    Favalli, Andrea; Swinhoe, Martyn

    2016-07-12

    Los Alamos National Laboratory researchers have successfully demonstrated for the first time that laser-generated neutrons can be enlisted as a useful tool in the War on Terror. The international research team used the short-pulse laser at Los Alamos's TRIDENT facility to generate a neutron beam with novel characteristics that interrogated a closed container to confirm the presence and quantity of nuclear material inside. The successful experiment paves the way for creation of a table-top-sized or truck-mounted neutron generator that could be installed at strategic locations worldwide to thwart smugglers trafficking in nuclear materials.

  16. Fifty-one years of Los Alamos Spacecraft

    SciTech Connect

    Fenimore, Edward E.

    2014-09-04

    From 1963 to 2014, the Los Alamos National Laboratory was involved in at least 233 spacecraft. There are probably only one or two institutions in the world that have been involved in so many spacecraft. Los Alamos space exploration started with the Vela satellites for nuclear test detection, but soon expanded to ionospheric research (mostly barium releases), radioisotope thermoelectric generators, solar physics, solar wind, magnetospheres, astrophysics, national security, planetary physics, earth resources, radio propagation in the ionosphere, and cubesats. Here, we present a list of the spacecraft, their purpose, and their launch dates for use during RocketFest

  17. A physicists guide to The Los Alamos Primer

    NASA Astrophysics Data System (ADS)

    Reed, B. Cameron

    2016-11-01

    In April 1943, a group of scientists at the newly established Los Alamos Laboratory were given a series of lectures by Robert Serber on what was then known of the physics and engineering issues involved in developing fission bombs. Serber’s lectures were recorded in a 24 page report titled The Los Alamos Primer, which was subsequently declassified and published in book form. This paper describes the background to the Primer and analyzes the physics contained in its 22 sections. The motivation for this paper is to provide a firm foundation of the background and contents of the Primer for physicists interested in the Manhattan Project and nuclear weapons.

  18. Contributions of chemistry in early day Los Alamos

    SciTech Connect

    Penneman, R.A.; Meade, R.A.

    1990-01-01

    During 1943--1945, the premier physics laboratory in the world was at Los Alamos, but chemistry contributions were vital. Major chemical impacts on the success of the Los Alamos wartime mission included electrochemistry, which found the true melting point of plutonium metal to be hundreds of degrees lower than anticipated. This discovery had profound simplifying effects regarding crucibles to contain molten plutonium and on its production. Other significant chemical contributions involved constant purification of plutonium for reuse, producing carrier-free gamma sources at unprecedented kilo-curie levels, and high polonium work. 8 refs.

  19. Los Alamos Using Neutrons to Stop Nuclear Smugglers

    SciTech Connect

    Favalli, Andrea; Swinhoe, Martyn

    2013-06-03

    Los Alamos National Laboratory researchers have successfully demonstrated for the first time that laser-generated neutrons can be enlisted as a useful tool in the War on Terror. The international research team used the short-pulse laser at Los Alamos's TRIDENT facility to generate a neutron beam with novel characteristics that interrogated a closed container to confirm the presence and quantity of nuclear material inside. The successful experiment paves the way for creation of a table-top-sized or truck-mounted neutron generator that could be installed at strategic locations worldwide to thwart smugglers trafficking in nuclear materials.

  20. Duck!: Scaling the height of a horizontal barrier to body height

    PubMed Central

    Stefanucci, Jeanine K.; Geuss, Michael N.

    2012-01-01

    Recent research shows that the body is used to scale environmental extents. We question whether the body is used to scale heights as measured by real actions (Experiments 1 and 2), or judgments about action and extent made from a single viewpoint (Experiments 3 and 4). First, participants walked under barriers either naturally or when wearing shoes or a helmet. Participants required a larger margin of safety (ducked at shorter heights) when they were made taller. In follow-up experiments, participants visually matched barrier heights and judged whether they could walk under them when wearing shoes or a helmet. Only the helmet decreased visually matched estimates; action judgments were no different when taller. The final experiment suggested that the change in matched estimates may have been due to lack of experience wearing the helmet. Overall, the results suggest that perceived height is scaled to the body and that when body height is altered, experience may moderate the rescaling of height. PMID:20601715

  1. Needs assessment for fire department services and resources for the Los Alamos National Laboratory, Los Alamos, New Mexico. Final report

    SciTech Connect

    1995-11-15

    This report has been developed in response to a request from the Los Alamos National Laboratory (LANL) to evaluate the need for fire department services so as to enable the Laboratory to plan effective fire protection and thereby: meet LANL`s regulatory and contractual obligations; interface with the Department of Energy (DOE) and other agencies on matters relating to fire and emergency services; and ensure appropriate protection of the community and environment. This study is an outgrowth of the 1993 Fire Department Needs Assessment (prepared for DOE) but is developed from the LANL perspective. Input has been received from cognizant and responsible representatives at LANL, DOE, Los Alamos County (LAC) and the Los Alamos Fire Department (LAFD).

  2. Are inequalities in height narrowing? Comparing effects of social class on height in two generations

    PubMed Central

    Li, L; Manor, O; Power, C

    2004-01-01

    Objective: To determine whether social inequalities in height change across generations. Methods: The target population was from the 1958 British birth cohort, all born 3rd–9th March 1958, followed to 1991, and the offspring of one third of this population. Main outcomes were height measured at 7, 11, 16, and 33 years (cohort members) and once at 4–18 years (offspring). Multilevel models applied to associations of social class of origin with (a) child-to-adult growth trajectory (cohort members), (b) height (offspring), and (c) generational height increment. Results: Height inequalities were observed among cohort members, with differences >2.0 cm at all ages between classes I and II, and IV and V. By adulthood, the difference in mean height had declined significantly in boys and slightly in girls. A secular trend was seen between the two generations. While male offspring had a similar mean height to their fathers in classes I and II, boys in classes IV and V gained 2.1 cm (p<0.001). Height gains of female offspring were evident in all classes, with a greater gain in classes IV and V (non-significant). The social class effect on height was weaker among offspring, with a difference between classes I and II, and IV and V of less than 1 cm. Conclusions: Social inequalities in height observed among the cohort weakened substantially in the next generation due to a greater height gain among offspring from manual classes. Inequalities in childhood height have narrowed between the two generations in this study. PMID:15499054

  3. Approach for a Global Height Reference System

    NASA Astrophysics Data System (ADS)

    Ihde, Johannes

    2015-04-01

    Hermann Drewes, Christoph Foerste, Thomas Gruber, Gunter Liebsch, Roland Pail, Laura Sanchez For Earth system monitoring the heights are main parameters for global changes. Physical heights are potential differences of the outer Earth gravity field at different positions. Long term monitoring of the vertical component of the Earth surface needs a standardized defined and realized global reference relating the geometry and the gravity field of the Earth. In the last two decades, in several working groups of the International Association of Geodesy were different concepts for definition and realization of global height reference system discussed. Furthermore, the satellite gravity missions have the Earth gravity field data basis general extended. So far, it is possible to develop the present local and regional height reference systems concepts to a global approach. The presented proposal has to be understood as a model that consider the present possibilities and actual needs for the realization of a global height reference system. It includes aspects for the combination of observations and products representing the geometry and the gravity field of the Earth.

  4. The difference between the Weil height and the canonical height on elliptic curves

    NASA Astrophysics Data System (ADS)

    Silverman, Joseph H.

    1990-10-01

    Estimates for the difference of the Weil height and the canonical height of points on elliptic curves are used for many purposes, both theoretical and computational. In this note we give an explicit estimate for this difference in terms of the j-invariant and discriminant of the elliptic curve. The method of proof, suggested by Serge Lang, is to use the decomposition of the canonical height into a sum of local heights. We illustrate one use for our estimate by computing generators for the Mordell-Weil group in three examples.

  5. A survey of macromycete diversity at Los Alamos National Laboratory, Bandelier National Monument, and Los Alamos County; A preliminary report

    SciTech Connect

    Jarmie, N.; Rogers, F.J.

    1997-11-01

    The authors have completed a 5-year survey (1991--1995) of macromycetes found in Los Alamos County, Los Alamos National Laboratory, and Bandelier National Monument. The authors have compiled a database of 1,048 collections, their characteristics, and identifications. The database represents 123 (98%) genera and 175 (73%) species reliably identified. Issues of habitat loss, species extinction, and ecological relationships are addressed, and comparisons with other surveys are made. With this baseline information and modeling of this baseline data, one can begin to understand more about the fungal flora of the area.

  6. Background radioactivity in sediments near Los Alamos, New Mexico.

    PubMed

    McLin, Stephen G

    2004-07-26

    River and reservoir sediments have been collected annually by Los Alamos National Laboratory since 1974 and 1979, respectively. These background samples are collected from five river stations and four reservoirs located throughout northern New Mexico and southern Colorado. Analyses include 3H, 90Sr, 137Cs, total U, 238Pu, 239,240Pu, 241Am, gross alpha, gross beta, and gross gamma radioactivity. Surprisingly, there are no federal or state regulatory standards in the USA that specify how to compute background radioactivity values on sediments. Hence, the sample median (or 0.50 quantile) is proposed for this background because it reflects central data tendency and is distribution-free. Estimates for the upper limit of background radioactivity on river and reservoir sediments are made for sampled analytes using the 0.95 quantile (two-tail). These analyses also show that seven of ten analytes from reservoir sediments are normally distributed, or are normally distributed after a logarithmic or square root transformation. However, only three of ten analytes from river sediments are similarly distributed. In addition, isotope ratios for 137Cs/238Pu, 137Cs/239,240Pu, and 239,240Pu/238Pu from reservoir sediments are independent of clay content, total organic carbon/specific surface area (TOC/SSA) and cation exchange capacity/specific surface area (CEC/SSA) ratios. These TOC/SSA and CEC/SSA ratios reflect sediment organic carbon and surface charge densities that are associated with radionuclide absorption, adsorption, and ion exchange reactions on clay mineral structures. These latter ratio values greatly exceed the availability of background radionuclides in the environment, and insure that measured background levels are a maximum. Since finer-grained reservoir sediments contain larger clay-sized fractions compared to coarser river sediments, they show higher background levels for most analytes. Furthermore, radioactivity values on reservoir sediments have remained

  7. The height limit of a siphon

    PubMed Central

    Boatwright, A.; Hughes, S.; Barry, J.

    2015-01-01

    The maximum height of a siphon is generally assumed to be dependent on barometric pressure—about 10 m at sea level. This limit arises because the pressure in a siphon above the upper reservoir level is below the ambient pressure, and when the height of a siphon approaches 10 m, the pressure at the crown of the siphon falls below the vapour pressure of water causing water to boil breaking the column. After breaking, the columns on either side are supported by differential pressure between ambient and the low-pressure region at the top of the siphon. Here we report an experiment of a siphon operating at sea level at a height of 15 m, well above 10 m. Prior degassing of the water prevented cavitation. This experiment provides conclusive evidence that siphons operate through gravity and molecular cohesion. PMID:26628323

  8. The height limit of a siphon.

    PubMed

    Boatwright, A; Hughes, S; Barry, J

    2015-12-02

    The maximum height of a siphon is generally assumed to be dependent on barometric pressure-about 10 m at sea level. This limit arises because the pressure in a siphon above the upper reservoir level is below the ambient pressure, and when the height of a siphon approaches 10 m, the pressure at the crown of the siphon falls below the vapour pressure of water causing water to boil breaking the column. After breaking, the columns on either side are supported by differential pressure between ambient and the low-pressure region at the top of the siphon. Here we report an experiment of a siphon operating at sea level at a height of 15 m, well above 10 m. Prior degassing of the water prevented cavitation. This experiment provides conclusive evidence that siphons operate through gravity and molecular cohesion.

  9. The height limit of a siphon

    NASA Astrophysics Data System (ADS)

    Boatwright, A.; Hughes, S.; Barry, J.

    2015-12-01

    The maximum height of a siphon is generally assumed to be dependent on barometric pressure—about 10 m at sea level. This limit arises because the pressure in a siphon above the upper reservoir level is below the ambient pressure, and when the height of a siphon approaches 10 m, the pressure at the crown of the siphon falls below the vapour pressure of water causing water to boil breaking the column. After breaking, the columns on either side are supported by differential pressure between ambient and the low-pressure region at the top of the siphon. Here we report an experiment of a siphon operating at sea level at a height of 15 m, well above 10 m. Prior degassing of the water prevented cavitation. This experiment provides conclusive evidence that siphons operate through gravity and molecular cohesion.

  10. The height of watermelons with wall

    NASA Astrophysics Data System (ADS)

    Feierl, Thomas

    2012-03-01

    We derive asymptotics for the moments as well as the weak limit of the height distribution of watermelons with p branches with wall. This generalizes a famous result of de Bruijn et al (1972 Graph Theory and Computing (New York: Academic) pp 15-22) on the average height of planted plane trees, and results by Fulmek (2007 Electron. J. Combin. 14 R64) and Katori et al (2008 J. Stat. Phys. 131 1067-83) on the expected value and higher moments, respectively, of the height distribution of watermelons with two branches. The asymptotics for the moments depend on the analytic behaviour of certain multidimensional Dirichlet series. In order to obtain this information, we prove a reciprocity relation satisfied by the derivatives of one of Jacobi’s theta functions, which generalizes the well-known reciprocity law for Jacobi’s theta functions.

  11. The height limit of a siphon.

    PubMed

    Boatwright, A; Hughes, S; Barry, J

    2015-01-01

    The maximum height of a siphon is generally assumed to be dependent on barometric pressure-about 10 m at sea level. This limit arises because the pressure in a siphon above the upper reservoir level is below the ambient pressure, and when the height of a siphon approaches 10 m, the pressure at the crown of the siphon falls below the vapour pressure of water causing water to boil breaking the column. After breaking, the columns on either side are supported by differential pressure between ambient and the low-pressure region at the top of the siphon. Here we report an experiment of a siphon operating at sea level at a height of 15 m, well above 10 m. Prior degassing of the water prevented cavitation. This experiment provides conclusive evidence that siphons operate through gravity and molecular cohesion. PMID:26628323

  12. Orthometric height determination using optical clocks

    NASA Astrophysics Data System (ADS)

    Shen, WenBin

    2013-04-01

    General relativity theory predicts that there exists a gravity frequency shift (gravitational red shift) if an electromagnetic signal propagates from one point to another point, and the frequency shift depends on the geopotential difference between these two points. Inversely, by measuring the gravity frequency shift between arbitrary two points we may determine the geopotential and consequently the orthometric height difference between these two points. To improve our previous investigations (Shen and Peng 2012), the present study provides further foundation of the optical-fiber frequency transfer approach (OFTA; Shen and Peng 2012) and describes in details how to determine the orthometric height between two points using optical clocks via optical fiber. Optical clocks have achieved a stability of 10E-17 to 10E-18. In another aspect, remote optical fiber communication (e.g. Predehl et al. 2012) demonstrates a frequency comparison accuracy at the level of 10E-18 (or better), which is equivalent to a height variation of 1cm. The quick development of time-frequency science, including the high-precise optical clocks, provides potential of determining the orthometric height between arbitrary two points which are connected by optical fiber. This study suggests that determining the orthometric height difference between two points using optical clocks via optical fiber frequency transfer communication technique is prospective and potential. The realization of the OFTA may greatly contribute to the unification of the world height system (WHS). This work was supported partly by the NSFC (grant No. 41174011), National 973 Project China (grant No. 2013CB733305), NSFC (grant No. 41210006, 41128003, 41021061, 40974015).

  13. Evidence of Inbreeding Depression on Human Height

    PubMed Central

    McQuillan, Ruth; Eklund, Niina; Pirastu, Nicola; Kuningas, Maris; McEvoy, Brian P.; Esko, Tõnu; Corre, Tanguy; Davies, Gail; Kaakinen, Marika; Lyytikäinen, Leo-Pekka; Kristiansson, Kati; Havulinna, Aki S.; Gögele, Martin; Vitart, Veronique; Tenesa, Albert; Aulchenko, Yurii; Hayward, Caroline; Johansson, Åsa; Boban, Mladen; Ulivi, Sheila; Robino, Antonietta; Boraska, Vesna; Igl, Wilmar; Wild, Sarah H.; Zgaga, Lina; Amin, Najaf; Theodoratou, Evropi; Polašek, Ozren; Girotto, Giorgia; Lopez, Lorna M.; Sala, Cinzia; Lahti, Jari; Laatikainen, Tiina; Prokopenko, Inga; Kals, Mart; Viikari, Jorma; Yang, Jian; Pouta, Anneli; Estrada, Karol; Hofman, Albert; Freimer, Nelson; Martin, Nicholas G.; Kähönen, Mika; Milani, Lili; Heliövaara, Markku; Vartiainen, Erkki; Räikkönen, Katri; Masciullo, Corrado; Starr, John M.; Hicks, Andrew A.; Esposito, Laura; Kolčić, Ivana; Farrington, Susan M.; Oostra, Ben; Zemunik, Tatijana; Campbell, Harry; Kirin, Mirna; Pehlic, Marina; Faletra, Flavio; Porteous, David; Pistis, Giorgio; Widén, Elisabeth; Salomaa, Veikko; Koskinen, Seppo; Fischer, Krista; Lehtimäki, Terho; Heath, Andrew; McCarthy, Mark I.; Rivadeneira, Fernando; Montgomery, Grant W.; Tiemeier, Henning; Hartikainen, Anna-Liisa; Madden, Pamela A. F.; d'Adamo, Pio; Hastie, Nicholas D.; Gyllensten, Ulf; Wright, Alan F.; van Duijn, Cornelia M.; Dunlop, Malcolm; Rudan, Igor; Gasparini, Paolo; Pramstaller, Peter P.; Deary, Ian J.; Toniolo, Daniela; Eriksson, Johan G.; Jula, Antti; Raitakari, Olli T.; Metspalu, Andres; Perola, Markus; Järvelin, Marjo-Riitta; Uitterlinden, André; Visscher, Peter M.; Wilson, James F.

    2012-01-01

    Stature is a classical and highly heritable complex trait, with 80%–90% of variation explained by genetic factors. In recent years, genome-wide association studies (GWAS) have successfully identified many common additive variants influencing human height; however, little attention has been given to the potential role of recessive genetic effects. Here, we investigated genome-wide recessive effects by an analysis of inbreeding depression on adult height in over 35,000 people from 21 different population samples. We found a highly significant inverse association between height and genome-wide homozygosity, equivalent to a height reduction of up to 3 cm in the offspring of first cousins compared with the offspring of unrelated individuals, an effect which remained after controlling for the effects of socio-economic status, an important confounder (χ2 = 83.89, df = 1; p = 5.2×10−20). There was, however, a high degree of heterogeneity among populations: whereas the direction of the effect was consistent across most population samples, the effect size differed significantly among populations. It is likely that this reflects true biological heterogeneity: whether or not an effect can be observed will depend on both the variance in homozygosity in the population and the chance inheritance of individual recessive genotypes. These results predict that multiple, rare, recessive variants influence human height. Although this exploratory work focuses on height alone, the methodology developed is generally applicable to heritable quantitative traits (QT), paving the way for an investigation into inbreeding effects, and therefore genetic architecture, on a range of QT of biomedical importance. PMID:22829771

  14. Technical manpower needs and resources at Los Alamos National Laboratory

    SciTech Connect

    Freese, K.B.

    1984-01-01

    The Los Alamos National Laboratory has begun a program to share its scientific and technological expertise with students and teachers in the surrounding area. The goal of the Laboratory's Educational Outreach Program is to stimulate an awareness of professional opportunities in the sciences and engineering.

  15. Direct-current proton-beam measurements at Los Alamos

    SciTech Connect

    Sherman, Joseph; Stevens, Ralph R.; Schneider, J. David; Zaugg, Thomas

    1995-09-15

    Recently, a CW proton accelerator complex was moved from Chalk River Laboratories (CRL) to Los Alamos National Laboratory. This includes a 50-keV dc proton injector with a single-solenoid low-energy beam transport system (LEBT) and a CW 1.25-MeV, 267-MHz radiofrequency quadrupole (RFQ). The move was completed after CRL had achieved 55-mA CW operation at 1.25 MeV using 250-kW klystrode tubes to power the RFQ. These accelerator components are prototypes for the front end of a CW linac required for an accelerator-driven transmutation linac, and they provide early confirmation of some CW accelerator components. The injector (ion source and LEBT) and emittance measuring unit are installed and operational at Los Alamos. The dc microwave ion source has been operated routinely at 50-keV, 75-mA hydrogen-ion current. This ion source has demonstrated very good discharge and H2 gas efficiencies, and sufficient reliability to complete CW RFQ measurements at CRL. Proton fraction of 75% has been measured with 550-W discharge power. This high proton fraction removes the need for an analyzing magnet. Proton LEBT emittance measurements completed at Los Alamos suggest that improved transmission through the RFQ may be achieved by increasing the solenoid focusing current. Status of the final CW RFQ operation at CRL and the installation of the RFQ at Los Alamos will be given.

  16. Direct-current proton-beam measurements at Los Alamos

    SciTech Connect

    Sherman, J.; Stevens, R.R.; Schneider, J.D.; Zaugg, T.

    1994-08-01

    Recently, a CW proton accelerator complex was moved from Chalk River Laboratories (CRL) to Los Alamos National Laboratory. This includes a 50-keV dc proton injector with a single-solenoid low-energy beam transport system (LEBT) and a CW 1.25-MeV, 267-MHz radiofrequency quadrupole (RFQ). The move was completed after CRL had achieved 55-mA CW operation at 1.25 MeV using 250-kW klystrode tubes to power the RFQ. These accelerator components are prototypes for the front end of a CW linac required for an accelerator-driven transmutation linac, and they provide early confirmation of some CW accelerator components. The injector (ion source and LEBT) and emittance measuring unit are installed and operational at Los Alamos. The dc microwave ion source has been operated routinely at 50-keV, 75-mA hydrogen-ion current. This ion source has demonstrated very good discharge and H{sub 2} gas efficiencies, and sufficient reliability to complete CW RFQ measurements at CRL. Proton fraction of 75% has been measured with 550-W discharge power. This high proton fraction removes the need for an analyzing magnet. Proton LEBT emittance measurements completed at Los Alamos suggest that improved transmission through the RFQ may be achieved by increasing the solenoid focusing current. Status of the final CW RFQ operation at CRL and the installation of the RFQ at Los Alamos is given.

  17. Summary of environmental surveillance at Los Alamos during 1995

    SciTech Connect

    1996-10-01

    Linking the Rio Grande Valley and the Jemez Mountains, New Mexico`s Pajarito Plateau is home to a world-class scientific institution. Los Alamos National Laboratory (or the Laboratory), managed by the Regents of the University of California, is a government-owned, Department of Energy-supervised complex investigating all areas of modern science for the purposes of national defense, health, conservation, and ecology. The Laboratory was founded in 1943 as part of the Manhattan Project, whose members assembled to create the first nuclear weapon. Occupying the campus of the Los Alamos Ranch School, American and British scientists gathered on the isolated mesa tops to harness recently discovered nuclear power with the hope of ending World War II. In July 1945, the initial objective of the Laboratory, a nuclear device, was achieved in Los Alamos and tested in White Sands, New Mexico. Today the Laboratory continues its role in defense, particularly in nuclear weapons, including developing methods for safely handling weapons and managing waste. For the past twenty years, the Laboratory has published an annual environmental report. This pamphlet offers a synopsis that briefly explains important concepts, such as radiation and provides a summary of the monitoring results and regulatory compliance status that are explained at length in the document entitled Environmental Surveillance at Los Alamos during 1995.

  18. Mercury: The Los Alamos ICF KrF laser system

    SciTech Connect

    Czuchlewski, S.J.; York, G.W.; Bigio, I.J.; Brucker, J.; Hanson, D.; Honig, E.M.; Kurnit, N.; Leland, W.; McCown, A.W.; McLeod, J.; Rose, E.; Thomas, S.; Thompson, D.

    1993-01-19

    The Mercury KrF laser facility at Los Alamos is being built with the benefit of lessons learned from the Aurora system. An increased understanding of KrF laser engineering, and the designed implementation of system flexibility, will permit Mercury to serve as a tested for a variety of advanced KrF technology concepts.

  19. The Controlled-Air Incinerator at Los Alamos

    SciTech Connect

    Newmyer, J.N.

    1994-04-01

    The Controlled-Air Incinerator (CAI) at Los Alamos is being modified and upgraded to begin routine operations treating low-level mixed waste (LLMW), radioactively contaminated polychlorinated biphenyl (PCB) wastes, low-level liquid wastes, and possibly transuranic (TRU) wastes. This paper describes those modifications. Routine waste operations should begin in late FY95.

  20. The Los Alamos Space Science Outreach (LASSO) Program

    NASA Astrophysics Data System (ADS)

    Barker, P. L.; Skoug, R. M.; Alexander, R. J.; Thomsen, M. F.; Gary, S. P.

    2002-12-01

    The Los Alamos Space Science Outreach (LASSO) program features summer workshops in which K-14 teachers spend several weeks at LANL learning space science from Los Alamos scientists and developing methods and materials for teaching this science to their students. The program is designed to provide hands-on space science training to teachers as well as assistance in developing lesson plans for use in their classrooms. The program supports an instructional model based on education research and cognitive theory. Students and teachers engage in activities that encourage critical thinking and a constructivist approach to learning. LASSO is run through the Los Alamos Science Education Team (SET). SET personnel have many years of experience in teaching, education research, and science education programs. Their involvement ensures that the teacher workshop program is grounded in sound pedagogical methods and meets current educational standards. Lesson plans focus on current LANL satellite projects to study the solar wind and the Earth's magnetosphere. LASSO is an umbrella program for space science education activities at Los Alamos National Laboratory (LANL) that was created to enhance the science and math interests and skills of students from New Mexico and the nation. The LASSO umbrella allows maximum leveraging of EPO funding from a number of projects (and thus maximum educational benefits to both students and teachers), while providing a format for the expression of the unique science perspective of each project.

  1. Optical velocimetry at the Los Alamos Proton Radiography Facility

    NASA Astrophysics Data System (ADS)

    Tupa, Dale; Tainter, Amy; Neukirch, Levi; Hollander, Brian; Buttler, William; Holtkamp, David; The Los Alamos Proton Radiography Team Team

    2016-05-01

    The Los Alamos Proton Radiography Facility (pRad) employs a high-energy proton beam to image the properties and behavior of materials driven by high explosives. We will discuss features of pRad and describe some recent experiments, highlighting optical diagnostics for surface velocity measurements.

  2. Working with Fermi at Chicago and Los Alamos

    NASA Astrophysics Data System (ADS)

    Garwin, Richard L.

    2010-02-01

    I discuss my experience with Enrico Fermi as student and fellow faculty member at Chicago and with him as consultants to the Los Alamos Scientific Laboratory in 1950-1952. The talk shares observations about this great physicist and exemplary human being. )

  3. Final Height and Cardiometabolic Outcomes in Young Adults with Very Low Birth Weight (<1500 g)

    PubMed Central

    Sato, Ryosuke; Maekawa, Masato; Genma, Rieko; Shirai, Kenji; Ohki, Shigeru; Morita, Hiroshi; Suda, Takafumi; Watanabe, Hiroshi

    2014-01-01

    Objective Individuals with very low birth weight (VLBW; <1500 g) are known to be predisposed to both short final height and cardiometabolic disorders. However, associations between final height and cardiometabolic outcomes including glucose metabolism in VLBW individuals in young adulthood are not fully investigated. Methods We investigated glucose metabolism and other cardiometabolic outcomes such as lipid profiles, blood pressure, renal function, urinary albumin, and thyroid function in young adults with VLBW born between 1980 and 1990. Short stature was defined as a final height <10th percentile. Glucose intolerance [diabetes, impaired glucose tolerance (IGT), and impaired fasting glucose (IFG)] was determined using 75-g oral glucose tolerance tests. Associations between final height and cardiometabolic outcomes were examined using logistic or multiple linear regression. Results A total of 628 VLBW individuals were screened and 111 young adults with VLBW (19–30 years) participated in the study. Of the participants, 40 subjects (36%) had short stature with a final height <10th percentile. Eight subjects (7.2%) had glucose intolerance (1, diabetes; 6, IGT; 1, IFG). Short stature was correlated with glucose intolerance (odds ratio 11.1; 95% CI 1.92, 99.7; P = 0.006). Final height was inversely associated with the homeostatic model assessment (HOMA) of insulin resistance, HOMA-β, insulinogenic index, and total/LDL-cholesterol. The associations of final height with insulin sensitivity and lipid profiles remained after adjustment for target height and age at puberty onset. Conclusions Shorter final height was associated with less favorable metabolic profiles in young adults with VLBW, and may be partly mediated by reduced insulin sensitivity. These associations were independent of target height or age at puberty onset. PMID:25397968

  4. Emanation of tritiated water from disposal sites at Los Alamos, New Mexico

    SciTech Connect

    Abeele, W.V.

    1982-01-01

    The level of contamination induced by the presence of tritiated water (HTO) on the Bandelier tuff near Los Alamos, New Mexico has been seen to decrease vertically and horizontally at the same rate. This decrease in radioactivity with distance from the source has been measured around three different disposal shafts and found to be somewhat slower than the decrease in emanation rate with distance from the source. Physical factors, suspected of influencing HTO emanation, were entered as independent variables in a regression equation including measurements taken over a 14 month period. The physical variables studied were of thermal, hydrological, and meteorological origin or a combination of the above. Only four variables were retained as significant although they explained only 71% of the variation in the HTO flux.

  5. Unravelling the limits to tree height: a major role for water and nutrient trade-offs.

    PubMed

    Cramer, Michael D

    2012-05-01

    Competition for light has driven forest trees to grow exceedingly tall, but the lack of a single universal limit to tree height indicates multiple interacting environmental limitations. Because soil nutrient availability is determined by both nutrient concentrations and soil water, water and nutrient availabilities may interact in determining realised nutrient availability and consequently tree height. In SW Australia, which is characterised by nutrient impoverished soils that support some of the world's tallest forests, total [P] and water availability were independently correlated with tree height (r = 0.42 and 0.39, respectively). However, interactions between water availability and each of total [P], pH and [Mg] contributed to a multiple linear regression model of tree height (r = 0.72). A boosted regression tree model showed that maximum tree height was correlated with water availability (24%), followed by soil properties including total P (11%), Mg (10%) and total N (9%), amongst others, and that there was an interaction between water availability and total [P] in determining maximum tree height. These interactions indicated a trade-off between water and P availability in determining maximum tree height in SW Australia. This is enabled by a species assemblage capable of growing tall and surviving (some) disturbances. The mechanism for this trade-off is suggested to be through water enabling mass-flow and diffusive mobility of P, particularly of relatively mobile organic P, although water interactions with microbial activity could also play a role.

  6. Height as a Basis for Interpersonal Attraction.

    ERIC Educational Resources Information Center

    Hensley, Wayne E.

    Based on the observation that taller males seem to have an advantage in date/mate selection, a study investigated the role that height plays in the choice of a partner. Subjects, 594 student volunteers from communication classes at a large Mid-Atlantic university, completed a questionnaire designed to assess such factors as respondent sex, present…

  7. 24 CFR 3280.104 - Ceiling heights.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Ceiling heights. 3280.104 Section 3280.104 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR HOUSING-FEDERAL HOUSING COMMISSIONER, DEPARTMENT OF HOUSING AND...

  8. 24 CFR 3280.104 - Ceiling heights.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 5 2013-04-01 2013-04-01 false Ceiling heights. 3280.104 Section 3280.104 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF ASSISTANT SECRETARY FOR HOUSING-FEDERAL HOUSING COMMISSIONER, DEPARTMENT OF HOUSING AND...

  9. 75 FR 22691 - Death of Dorothy Height

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-30

    ... the two hundred and thirty-fourth. (Presidential Sig.) [FR Doc. 2010-10248 Filed 4-29-10; 8:45 am... memory of Dorothy Height, I hereby order, by the authority vested in me by the Constitution and the...

  10. Growth hormone: health considerations beyond height gain

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The therapeutic benefit of growth hormone (GH) therapy in improving height in short children is widely recognized; however, GH therapy is associated with other metabolic actions that may be of benefit in these children. Beneficial effects of GH on body composition have been documented in several dif...

  11. Environmental Survey preliminary report, Los Alamos National Laboratory, Los Alamos, New Mexico

    SciTech Connect

    Not Available

    1988-01-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy's (DOE) Los Alamos National Laboratory (LANL), conducted March 29, 1987 through April 17, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the LANL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at the LANL, and interviews with site personnel. The Survey team developed Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by the Idaho National Engineering Laboratory. When completed, the results will be incorporated into the LANL Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the Survey for the LANL. 65 refs., 68 figs., 73 tabs.

  12. Environmental assessment for effluent reduction, Los Alamos National Laboratory, Los Alamos, New Mexico

    SciTech Connect

    1996-09-11

    The Department of Energy (DOE) proposes to eliminate industrial effluent from 27 outfalls at Los Alamos National Laboratory (LANL). The Proposed Action includes both simple and extensive plumbing modifications, which would result in the elimination of industrial effluent being released to the environment through 27 outfalls. The industrial effluent currently going to about half of the 27 outfalls under consideration would be rerouted to LANL`s sanitary sewer system. Industrial effluent from other outfalls would be eliminated by replacing once-through cooling water systems with recirculation systems, or, in a few instances, operational changes would result in no generation of industrial effluent. After the industrial effluents have been discontinued, the affected outfalls would be removed from the NPDES Permit. The pipes from the source building or structure to the discharge point for the outfalls may be plugged, or excavated and removed. Other outfalls would remain intact and would continue to discharge stormwater. The No Action alternative, which would maintain the status quo for LANL`s outfalls, was also analyzed. An alternative in which industrial effluent would be treated at the source facilities was considered but dismissed from further analysis because it would not reasonably meet the DOE`s purpose for action, and its potential environmental effects were bounded by the analysis of the Proposed Action and the No Action alternatives.

  13. [Use of knee height to correct the body height of elderly Hispanics].

    PubMed

    Bermúdez, O I; Tucker, K L

    2000-03-01

    Loss of stature in certain elderly subjects can be attributed to diseases such as osteoporosis, as well as to age and generational effects. In addition, many elders cannot stand straight for accurate measurement. For these cases, total height can be estimated with regression equations based on knee height. The aims of this study were, firstly, to evaluate the applicability of regression equations based on knee height for estimation of stature and, secondly, to document the differences between measured and estimated height in a group of elderly Hispanics with postural problems (n = 166) in comparison with a group of elderly Hispanic without postural problems (n = 270). Using both, estimated and measured height, we also calculated the body mass index (BMI) of both groups of elders. Statistical analyses were done with paired t-tests, within sex and study group. Within the group with postural problems, estimated height was higher than the measured height for both men (p < or = 0.001) and women (p < or = 0.001). There were no significant differences between measured and estimated height in the group without postural problems. Furthermore, in the group with postural problems, BMI values calculated with estimated height were lower than those estimated with the measured height, and these differences were also significant for both men (p < or = 0.001) and women (p < or = 0.001). With the aging of the Latin American population, there is a need for more nutrition and health research among elders. In order to do this we need to develop and use methods and criteria appropriate for each population. PMID:11048570

  14. Commercialization of Los Alamos National Laboratory technologies via small businesses. Final report

    SciTech Connect

    Brice, R.; Carton, D.; Rhyne, T.

    1997-06-01

    Appendices are presented from a study performed on a concept model system for the commercialization of Los Alamos National Laboratory technologies via small businesses. Topics include a summary of information from the joint MCC/Los Alamos technology conference; a comparison of New Mexico infrastructure to other areas; a typical licensing agreement; technology screening guides; summaries of specific DOE/UC/Los Alamos documents; a bibliography; the Oak Ridge National Laboratory TCRD; The Ames Center for Advanced Technology Development; Los Alamos licensing procedures; presentation of slides from monthly MCC/Los Alamos review meetings; generalized entrepreneurship model; and a discussion on receiving equity for technology.

  15. Predicting Vertical Jump Height from Bar Velocity

    PubMed Central

    García-Ramos, Amador; Štirn, Igor; Padial, Paulino; Argüelles-Cienfuegos, Javier; De la Fuente, Blanca; Strojnik, Vojko; Feriche, Belén

    2015-01-01

    The objective of the study was to assess the use of maximum (Vmax) and final propulsive phase (FPV) bar velocity to predict jump height in the weighted jump squat. FPV was defined as the velocity reached just before bar acceleration was lower than gravity (-9.81 m·s-2). Vertical jump height was calculated from the take-off velocity (Vtake-off) provided by a force platform. Thirty swimmers belonging to the National Slovenian swimming team performed a jump squat incremental loading test, lifting 25%, 50%, 75% and 100% of body weight in a Smith machine. Jump performance was simultaneously monitored using an AMTI portable force platform and a linear velocity transducer attached to the barbell. Simple linear regression was used to estimate jump height from the Vmax and FPV recorded by the linear velocity transducer. Vmax (y = 16.577x - 16.384) was able to explain 93% of jump height variance with a standard error of the estimate of 1.47 cm. FPV (y = 12.828x - 6.504) was able to explain 91% of jump height variance with a standard error of the estimate of 1.66 cm. Despite that both variables resulted to be good predictors, heteroscedasticity in the differences between FPV and Vtake-off was observed (r2 = 0.307), while the differences between Vmax and Vtake-off were homogenously distributed (r2 = 0.071). These results suggest that Vmax is a valid tool for estimating vertical jump height in a loaded jump squat test performed in a Smith machine. Key points Vertical jump height in the loaded jump squat can be estimated with acceptable precision from the maximum bar velocity recorded by a linear velocity transducer. The relationship between the point at which bar acceleration is less than -9.81 m·s-2 and the real take-off is affected by the velocity of movement. Mean propulsive velocity recorded by a linear velocity transducer does not appear to be optimal to monitor ballistic exercise performance. PMID:25983572

  16. Predicting vertical jump height from bar velocity.

    PubMed

    García-Ramos, Amador; Štirn, Igor; Padial, Paulino; Argüelles-Cienfuegos, Javier; De la Fuente, Blanca; Strojnik, Vojko; Feriche, Belén

    2015-06-01

    The objective of the study was to assess the use of maximum (Vmax) and final propulsive phase (FPV) bar velocity to predict jump height in the weighted jump squat. FPV was defined as the velocity reached just before bar acceleration was lower than gravity (-9.81 m·s(-2)). Vertical jump height was calculated from the take-off velocity (Vtake-off) provided by a force platform. Thirty swimmers belonging to the National Slovenian swimming team performed a jump squat incremental loading test, lifting 25%, 50%, 75% and 100% of body weight in a Smith machine. Jump performance was simultaneously monitored using an AMTI portable force platform and a linear velocity transducer attached to the barbell. Simple linear regression was used to estimate jump height from the Vmax and FPV recorded by the linear velocity transducer. Vmax (y = 16.577x - 16.384) was able to explain 93% of jump height variance with a standard error of the estimate of 1.47 cm. FPV (y = 12.828x - 6.504) was able to explain 91% of jump height variance with a standard error of the estimate of 1.66 cm. Despite that both variables resulted to be good predictors, heteroscedasticity in the differences between FPV and Vtake-off was observed (r(2) = 0.307), while the differences between Vmax and Vtake-off were homogenously distributed (r(2) = 0.071). These results suggest that Vmax is a valid tool for estimating vertical jump height in a loaded jump squat test performed in a Smith machine. Key pointsVertical jump height in the loaded jump squat can be estimated with acceptable precision from the maximum bar velocity recorded by a linear velocity transducer.The relationship between the point at which bar acceleration is less than -9.81 m·s(-2) and the real take-off is affected by the velocity of movement.Mean propulsive velocity recorded by a linear velocity transducer does not appear to be optimal to monitor ballistic exercise performance.

  17. CALIOP-derived Smoke Plume Injection Height

    NASA Astrophysics Data System (ADS)

    Soja, A. J.; Winker, D. M.; Choi, H. D.; Fairlie, T. D.; Westberg, D. J.; Roller, C. M.; Pouliot, G.; Vaughan, M.; Pierce, T. E.; Trepte, C. R.; Rao, V.

    2014-12-01

    Biomass burning is a dominant natural and anthropogenic disturbance that feeds back to the climate system. Fire regimes, ecosystem fuels, fire severity and intensity vary widely, even within the same system, largely under the control of weather and climate. These strongly influence fire plume injection height and thus the transport of related biomass burning emissions, affecting air quality, human health and the climate system. If our knowledge of plume injection height is incorrect, transport models of those emissions will likewise be incorrect, adversely affecting our ability to analyze and predict climate feedbacks (i.e. black carbon to the Arctic, precipitation, cloud-radiation relationships) and public health (air quality forecast). Historically, plume height was based on the pioneering work of G.A. Briggs [1969; 1971] and verified with limited field campaigns. However, we currently have two satellite instruments, Cloud-Aerosol LIdar with Orthogonal Polarization (CALIOP) onboard CALIPSO (afternoon overpass) and Multi-angle Imaging SpectroRadiometer (MISR) onboard TERRA (morning overpass), that can provide the statistics necessary to verify our assumptions and improve fire plume injection height estimates for use in both small- and large-scale models. We have developed a methodology to assess fire plume injection height using the Langley Trajectory Model (LaTM), CALIOP, Hazard Mapping System (HMS) smoke plume, and MODerate Resolution Imaging Spectrometer (MODIS) thermal anomaly data that is capable of generating two distinct types of verification data. A single CALIOP smoke-filled aerosol envelop can be traced back to numerous fire events, and using multiple CALIOP transects from numerous days, a daily smoke plume injection height evolution from a single fire can be defined. Additionally, we have linked the smoke plumes to ecosystems and the meteorological variables that define fire weather. In concert, CALIOP and MISR data can produce the statistical knowledge

  18. Estimation of Stand Height and Forest Volume Using High Resolution Stereo Photography and Forest Type Map

    NASA Astrophysics Data System (ADS)

    Kim, K. M.

    2016-06-01

    Traditional field methods for measuring tree heights are often too costly and time consuming. An alternative remote sensing approach is to measure tree heights from digital stereo photographs which is more practical for forest managers and less expensive than LiDAR or synthetic aperture radar. This work proposes an estimation of stand height and forest volume(m3/ha) using normalized digital surface model (nDSM) from high resolution stereo photography (25cm resolution) and forest type map. The study area was located in Mt. Maehwa model forest in Hong Chun-Gun, South Korea. The forest type map has four attributes such as major species, age class, DBH class and crown density class by stand. Overlapping aerial photos were taken in September 2013 and digital surface model (DSM) was created by photogrammetric methods(aerial triangulation, digital image matching). Then, digital terrain model (DTM) was created by filtering DSM and subtracted DTM from DSM pixel by pixel, resulting in nDSM which represents object heights (buildings, trees, etc.). Two independent variables from nDSM were used to estimate forest stand volume: crown density (%) and stand height (m). First, crown density was calculated using canopy segmentation method considering live crown ratio. Next, stand height was produced by averaging individual tree heights in a stand using Esri's ArcGIS and the USDA Forest Service's FUSION software. Finally, stand volume was estimated and mapped using aerial photo stand volume equations by species which have two independent variables, crown density and stand height. South Korea has a historical imagery archive which can show forest change in 40 years of successful forest rehabilitation. For a future study, forest volume change map (1970s-present) will be produced using this stand volume estimation method and a historical imagery archive.

  19. Intersection of Southern Parkway and Southern Heights, looking toward the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Intersection of Southern Parkway and Southern Heights, looking toward the Beechmont Historic District, showing changes in landscaping, northeast - Southern Heights-Beechmont District Landscapes, Louisville, Jefferson County, KY

  20. A GEOMETRICAL HEIGHT SCALE FOR SUNSPOT PENUMBRAE

    SciTech Connect

    Puschmann, K. G.; Ruiz Cobo, B.; MartInez Pillet, V. E-mail: brc@iac.e

    2010-09-10

    Inversions of spectropolarimetric observations of penumbral filaments deliver the stratification of different physical quantities in an optical depth scale. However, without establishing a geometrical height scale, their three-dimensional geometrical structure cannot be derived. This is crucial in understanding the correct spatial variation of physical properties in the penumbral atmosphere and to provide insights into the mechanism capable of explaining the observed penumbral brightness. The aim of this work is to determine a global geometrical height scale in the penumbra by minimizing the divergence of the magnetic field vector and the deviations from static equilibrium as imposed by a force balance equation that includes pressure gradients, gravity, and the Lorentz force. Optical depth models are derived from the inversion of spectropolarimetric data of an active region observed with the Solar Optical Telescope on board the Hinode satellite. We use a genetic algorithm to determine the boundary condition for the inference of geometrical heights. The retrieved geometrical height scale permits the evaluation of the Wilson depression at each pixel and the correlation of physical quantities at each height. Our results fit into the uncombed penumbral scenario, i.e., a penumbra composed of flux tubes with channeled mass flow and with a weaker and more horizontal magnetic field as compared with the background field. The ascending material is hotter and denser than their surroundings. We do not find evidence of overturning convection or field-free regions in the inner penumbral area analyzed. The penumbral brightness can be explained by the energy transfer of the ascending mass carried by the Evershed flow, if the physical quantities below z = -75 km are extrapolated from the results of the inversion.

  1. Independent Peer Reviews

    SciTech Connect

    2012-03-16

    Independent Assessments: DOE's Systems Integrator convenes independent technical reviews to gauge progress toward meeting specific technical targets and to provide technical information necessary for key decisions.

  2. Prices, infrastructure, household characteristics and child height.

    PubMed

    Thomas, D; Strauss, J

    1992-10-01

    A Brazilian household survey, ENDEF, in 1974-75 and the 1974 Informacoes Basicas Municipais (IBM) provided data for the analysis of the impact of community services and infrastructure and household characteristics on the logarithm of child height, standardized for age and gender. The sample was comprised of 36,974 children stratified by residential location, the child's age, and the educational level of the mother. Variance and covariance matrices were estimated with the jackknife developed by Efron (1982). Household characteristics included the logarithm of per capita expenditure as a measure of household resource availability, income, and parental education. Community characteristics were local market price indices for 6 food groups (dairy products, beans, cereals, meat, fish, and sugar), level of urbanization, buildings with sewage, water, and electricity connections per capita, per capita number of buildings, and population density. Health services were measured as per capita number of hospitals and clinics and doctors and nurses, and the number of beds are hospital. Educational services include a measure of student teacher ratios, elementary school class size, and per capita number of teachers living in the community. the results show that expenditure had a positive, significant effect on the height of children 2 years and older. Expenditure was a significant determinant for literate and illiterate mothers, and not well educated mothers. The impact of maternal education was largest on the length of babies and declined with the age of the child. Father's education had not impact of length of babies. The effect of parents' education was complementary. The effect of father's education was largest when mothers had some education. Better educated parents had healthier children. Maternal rather than paternal height had an impact of the length of a baby. In the community models, prices had a significant effect on child height, in both urban and rural areas, in all

  3. Prices, infrastructure, household characteristics and child height.

    PubMed

    Thomas, D; Strauss, J

    1992-10-01

    A Brazilian household survey, ENDEF, in 1974-75 and the 1974 Informacoes Basicas Municipais (IBM) provided data for the analysis of the impact of community services and infrastructure and household characteristics on the logarithm of child height, standardized for age and gender. The sample was comprised of 36,974 children stratified by residential location, the child's age, and the educational level of the mother. Variance and covariance matrices were estimated with the jackknife developed by Efron (1982). Household characteristics included the logarithm of per capita expenditure as a measure of household resource availability, income, and parental education. Community characteristics were local market price indices for 6 food groups (dairy products, beans, cereals, meat, fish, and sugar), level of urbanization, buildings with sewage, water, and electricity connections per capita, per capita number of buildings, and population density. Health services were measured as per capita number of hospitals and clinics and doctors and nurses, and the number of beds are hospital. Educational services include a measure of student teacher ratios, elementary school class size, and per capita number of teachers living in the community. the results show that expenditure had a positive, significant effect on the height of children 2 years and older. Expenditure was a significant determinant for literate and illiterate mothers, and not well educated mothers. The impact of maternal education was largest on the length of babies and declined with the age of the child. Father's education had not impact of length of babies. The effect of parents' education was complementary. The effect of father's education was largest when mothers had some education. Better educated parents had healthier children. Maternal rather than paternal height had an impact of the length of a baby. In the community models, prices had a significant effect on child height, in both urban and rural areas, in all

  4. Multi-Sensor Estimation of Mixing Heights Over a Coastal City

    SciTech Connect

    Nielsen-Gammon, John W.; Powell, Christina L.; Mahoney, Michael J.; Angevine, Wayne M.; Senff, Christoph; White, Allen B.; Berkowitz, Carl M.; Doran, J. C.; Knupp, Kevin

    2008-01-01

    An airborne Microwave Temperature Profiler (MTP) was deployed during the An airborne Microwave Temperature Profiler (MTP) was deployed during the Texas 2000 Air Quality Study (TexAQS-2000) to make measurements of boundary layer thermal structure. An objective technique is developed and tested for estimating the mixed layer (ML) height from the MTP vertical temperature profiles. The technique identifies the ML height as a threshold increase of potential temperature from its minimum value within the boundary layer. In order to calibrate the technique and evaluate the usefulness of this approach, coincident estimates from radiosondes, radar wind profilers, an aerosol backscatter lidar, and in situ aircraft measurements were compared with each other and with the MTP. Relative biases among all instruments were generally less than 50 m, and the agreement between MTP ML height estimates and other estimates was at least as good as the agreement among the other estimates. The ML height estimates from the MTP and other instruments are utilized to determine the spatial and temporal evolution of ML height in the Houston area on 1 Sept. 2000. An elevated temperature inversion was present, so ML growth was inhibited until early afternoon. In the afternoon, large spatial variations in ML height developed across the Houston area. The highest ML heights, well over 2 km, were observed to the north of Houston, while downwind of Galveston Bay and within the late afternoon sea breeze ML heights were much lower. The spatial variations that were found away from the immediate influence of coastal circulations were unexpected, and multiple independent ML height estimates were essential for documenting this feature.

  5. Is palatal vault height a determinant for nasopharyngeal carcinoma: A hypothesis?

    PubMed

    Das, Sayan; Gupta, Tejpal; Dholam, Kanchan; Chouksey, Gunjan; Ghosh Laskar, Sarbani; Prakash Agarwal, Jai

    2015-11-01

    Although environmental and genetic factors are known for nasopharyngeal carcinoma, the present study is an attempt to provide a hypothesis behind the development of NPC with regards to the anatomical factor, the hypothesis being that patients with a deeper palatal vault tend to have a higher risk of developing nasopharyngeal cancers. The objective of this study was to find out the palatal vault height in patients with nasopharyngeal carcinoma and compare it with the palatal vault height in patients with oral carcinomas. The heights of the palatal vault of 20 consecutive patients with nasopharyngeal carcinoma and 20 patients with carcinoma of the oral cavity (except hard palate) as control were recorded. In addition, in patients with carcinoma of the nasopharynx the height of the palate on the CT scans was measured and correlation between these recordings were calculated. The palatal heights of the nasopharyngeal and oral cancer cohorts were compared using independent sample T test. A strong correlation was observed in the nasopharyngeal cancer cohort between the palatal height measured manually and the radiologically measured height on the CT scans (Pearson Correlation Coefficient - 0.633; p=0.003). The difference in the mean heights of the nasopharyngeal and oral cancer cohorts was statistically significant (p<0.001). Nasopharyngeal cancer patients tend to have a higher palatal vault height compared to those with carcinoma of oral cavity other than hard palate. In such palates with a deep vault, there is increased turbulent air flow leading to increased deposition of air-borne virus/carcinogens. Lingering of these agents may ultimately cause carcinoma of the nasopharynx. PMID:26206762

  6. Improving ergonomics in milking parlors: empirical findings for optimal working heights in five milking parlor types.

    PubMed

    Cockburn, M; Savary, P; Kauke, M; Schick, M; Hoehne-Hückstädt, U; Hermanns, I; Ellegast, R

    2015-02-01

    Milking postures have shifted from seated milking in tethered stalls to milking in a standing position in parlors. However, the musculoskeletal workload of dairy farmers remains high. Previous studies have shown that different working heights affect ergonomics, but they could not objectively evaluate and quantify the workload. The aim of the present study was to assess the effect of working height in different milking parlor types on the milker's workload during the task of attaching milking clusters. Computer-assisted recording and long-term analysis of movements were used to record positions of joints and body regions while performing certain tasks in terms of angular degrees of joints (ADJ) according to the neutral zero method. The 5th, 50th, and 95th percentiles described the distribution of angular degree values measured for each joint. The ADJ were evaluated according to international standards and other scientific literature on the issue to assess the muscular load. The workload was compared between 5 parlor types (auto tandem, herringbone 30°, herringbone 50°, parallel, and rotary) on 15 farms with 2 subjects per parlor and 1 milking period per subject. The working height was defined as a coefficient based on the milker's body height, the floor level, and the cow's udder height. The data recorded during the attachment task were analyzed using generalized linear mixed-effects models taking into account the hierarchical experimental design. The results indicated that the interaction of the cow's udder height, the milker's body height, and the parlor type had a larger effect on ergonomics than each parameter had independently. The interaction was significant in at least 1 of the 3 percentiles in 28 out of 31 ADJ. The postural differences between parlor types, however, were minor. A milking health formula was created to calculate the ideal depth of pit by considering the parlor type, the milker's height, and the mean herd udder height. This formula can be

  7. Improving ergonomics in milking parlors: empirical findings for optimal working heights in five milking parlor types.

    PubMed

    Cockburn, M; Savary, P; Kauke, M; Schick, M; Hoehne-Hückstädt, U; Hermanns, I; Ellegast, R

    2015-02-01

    Milking postures have shifted from seated milking in tethered stalls to milking in a standing position in parlors. However, the musculoskeletal workload of dairy farmers remains high. Previous studies have shown that different working heights affect ergonomics, but they could not objectively evaluate and quantify the workload. The aim of the present study was to assess the effect of working height in different milking parlor types on the milker's workload during the task of attaching milking clusters. Computer-assisted recording and long-term analysis of movements were used to record positions of joints and body regions while performing certain tasks in terms of angular degrees of joints (ADJ) according to the neutral zero method. The 5th, 50th, and 95th percentiles described the distribution of angular degree values measured for each joint. The ADJ were evaluated according to international standards and other scientific literature on the issue to assess the muscular load. The workload was compared between 5 parlor types (auto tandem, herringbone 30°, herringbone 50°, parallel, and rotary) on 15 farms with 2 subjects per parlor and 1 milking period per subject. The working height was defined as a coefficient based on the milker's body height, the floor level, and the cow's udder height. The data recorded during the attachment task were analyzed using generalized linear mixed-effects models taking into account the hierarchical experimental design. The results indicated that the interaction of the cow's udder height, the milker's body height, and the parlor type had a larger effect on ergonomics than each parameter had independently. The interaction was significant in at least 1 of the 3 percentiles in 28 out of 31 ADJ. The postural differences between parlor types, however, were minor. A milking health formula was created to calculate the ideal depth of pit by considering the parlor type, the milker's height, and the mean herd udder height. This formula can be

  8. Predicting Daily Insolation with Hourly Cloud Height and Coverage.

    NASA Astrophysics Data System (ADS)

    Meyers, T. P.; Dale, R. F.

    1983-04-01

    Solar radiation information is used in crop growth, boundary layer, entomological and plant pathological models, and in determining the potential use of active and passive solar energy systems. Yet solar radiation is among the least measured meteorological variables.A semi-physical model based on standard meteorological data was developed to estimate solar radiation received at the earth's surface. The radiation model includes the effects of Rayleigh scattering, absorption by water vapor and permanent gases, and absorption and scattering by aerosols and clouds. Cloud attenuation is accounted for by assigning transmission coefficients based on cloud height and amount. The cloud transmission coefficients for various heights and coverages were derived empirically from hourly observations of solar radiation in conjunction with corresponding cloud observations at West Lafayette, Indiana. The model was tested with independent data from West Lafayette and Indianapolis, Madison, WI, Omaha, NE, Columbia, MO, Nashville, TN, Seattle, WA, Los Angeles, CA, Phoenix, AZ, Lake Charles, LA, Miami, FL, and Sterling, VA. For each of these locations a 16% random sample of days was drawn within each of the 12 months in a year for testing the model. Excellent agreement between predicted and observed radiation values was obtained for all stations tested. Mean absolute errors ranged from 1.05 to 1.80 MJ m2 day1 and root-mean-square errors ranged from 1.31 to 2.32 MJ m2 day1. The model's performance judged by relative error was found to be independent of season and cloud amount for all locations tested.

  9. Love, careers, and heights in France, 2001.

    PubMed

    Herpin, Nicolas

    2005-12-01

    Short men are less likely to be married or live in a permanent relationship than their taller counterparts. This pattern is not due to their social status. While blue-collar workers are shorter on average than managers, the effects of height on finding a mate are similar in the two social groups. Being tall is also economically advantageous for men. With identical educational attainment levels, tall men have better careers than short men as they are given greater supervisory responsibilities. In making a commitment, some women might take height into account as an anticipated indicator of future resources of the household. Choice of partner is also influenced by social norms--i.e., partners should be physically well-matched--which is more difficult for shorter men.

  10. BOREAS AFM-6 Boundary Layer Height Data

    NASA Technical Reports Server (NTRS)

    Wilczak, James; Hall, Forrest G. (Editor); Newcomer, Jeffrey A. (Editor); Smith, David E. (Technical Monitor)

    2000-01-01

    The Boreal Ecosystem-Atmosphere Study (BOREAS) Airborne Fluxes and Meteorology (AFM)-6 team from National Oceanic and Atmospheric Adminsitration/Environment Technology Laboratory (NOAA/ETL) operated a 915-MHz wind/Radio Acoustic Sounding System (RASS) profiler system in the Southern Study Area (SSA) near the Old Jack Pine (OJP) site. This data set provides boundary layer height information over the site. The data were collected from 21 May 1994 to 20 Sep 1994 and are stored in tabular ASCII files. The boundary layer height data are available from the Earth Observing System Data and Information System (EOSDIS) Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC). The data files are available on a CD-ROM (see document number 20010000884).

  11. Measuring Ice Sheet Height with ICESat-2

    NASA Astrophysics Data System (ADS)

    Walsh, K.; Smith, B.; Neumann, T.; Hancock, D.

    2015-12-01

    ICESat-2 is NASA's next-generation laser altimeter, designed to measure changes in ice sheet height and sea ice freeboard. Over the ice sheets, it will use a continuous repeat-track pointing strategy to ensure that it accurately measures elevation changes along a set of reference tracks. Over most of the area of Earth's ice sheets, ICESat-2 will provide coverage with a track-to-track spacing better than ~3 km. The onboard ATLAS instrument will use a photon-counting approach to provide a global geolocated photon point cloud, which is then converted into surface-specific elevation data sets. In this presentation, we will outline our strategy for taking the low-level photon point cloud and turning it into measurements posted at 20 m along-track for a set of pre-defined reference points by (1) selecting groups of photon events (PEs) around each along-track point, (2) refining the initial PE selection by fitting selected PEs with an along-track segment model and eliminating outliers to the model, (3) applying histogram-based corrections to the surface height based on the residuals to the along-track segment model, (4) calculate error estimates based on estimates of relative contributions of signal and noise PEs to the observed PE count, and (5) determining the final location and surface height of the along-track segment. These measurements are then corrected for short-scale (100-200 m) across-track surface topography around the reference points to develop a time series of land ice heights. The resulting data products will allow us to measure ice sheet elevation change with a point-for-point accuracy of a few centimeters over Earth's ice sheets.

  12. 47 CFR 22.1011 - Antenna height limitations.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 2 2014-10-01 2014-10-01 false Antenna height limitations. 22.1011 Section 22... MOBILE SERVICES Offshore Radiotelephone Service § 22.1011 Antenna height limitations. The antenna height of offshore stations must not exceed 61 meters (200 feet) above mean sea level. The antenna height...

  13. 47 CFR 22.1011 - Antenna height limitations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Antenna height limitations. 22.1011 Section 22... MOBILE SERVICES Offshore Radiotelephone Service § 22.1011 Antenna height limitations. The antenna height of offshore stations must not exceed 61 meters (200 feet) above mean sea level. The antenna height...

  14. 47 CFR 22.1011 - Antenna height limitations.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 2 2013-10-01 2013-10-01 false Antenna height limitations. 22.1011 Section 22... MOBILE SERVICES Offshore Radiotelephone Service § 22.1011 Antenna height limitations. The antenna height of offshore stations must not exceed 61 meters (200 feet) above mean sea level. The antenna height...

  15. 47 CFR 22.1011 - Antenna height limitations.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 2 2011-10-01 2011-10-01 false Antenna height limitations. 22.1011 Section 22... MOBILE SERVICES Offshore Radiotelephone Service § 22.1011 Antenna height limitations. The antenna height of offshore stations must not exceed 61 meters (200 feet) above mean sea level. The antenna height...

  16. 47 CFR 22.1011 - Antenna height limitations.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 2 2012-10-01 2012-10-01 false Antenna height limitations. 22.1011 Section 22... MOBILE SERVICES Offshore Radiotelephone Service § 22.1011 Antenna height limitations. The antenna height of offshore stations must not exceed 61 meters (200 feet) above mean sea level. The antenna height...

  17. Algorithmic height compression of unordered trees.

    PubMed

    Ben-Naoum, Farah; Godin, Christophe

    2016-01-21

    By nature, tree structures frequently present similarities between their sub-parts. Making use of this redundancy, different types of tree compression techniques have been designed in the literature to reduce the complexity of tree structures. A popular and efficient way to compress a tree consists of merging its isomorphic subtrees, which produces a directed acyclic graph (DAG) equivalent to the original tree. An important property of this method is that the compressed structure (i.e. the DAG) has the same height as the original tree, thus limiting partially the possibility of compression. In this paper we address the problem of further compressing this DAG in height. The difficulty is that compression must be carried out on substructures that are not exactly isomorphic as they are strictly nested within each-other. We thus introduced a notion of quasi-isomorphism between subtrees that makes it possible to define similar patterns along any given path in a tree. We then proposed an algorithm to detect these patterns and to merge them, thus leading to compressed structures corresponding to DAGs augmented with return edges. In this way, redundant information is removed from the original tree in both width and height, thus achieving minimal structural compression. The complete compression algorithm is then illustrated on the compression of various plant-like structures.

  18. Statistical Sampling of Tide Heights Study

    NASA Technical Reports Server (NTRS)

    2002-01-01

    The goal of the study was to determine if it was possible to reduce the cost of verifying computational models of tidal waves and currents. Statistical techniques were used to determine the least number of samples required, in a given situation, to remain statistically significant, and thereby reduce overall project costs. Commercial, academic, and Federal agencies could benefit by applying these techniques, without the need to 'touch' every item in the population. For example, the requirement of this project was to measure the heights and times of high and low tides at 8,000 locations for verification of computational models of tidal waves and currents. The application of the statistical techniques began with observations to determine the correctness of submitted measurement data, followed by some assumptions based on the observations. Among the assumptions were that the data were representative of data-collection techniques used at the measurement locations, that time measurements could be ignored (that is, height measurements alone would suffice), and that the height measurements were from a statistically normal distribution. Sample means and standard deviations were determined for all locations. Interval limits were determined for confidence levels of 95, 98, and 99 percent. It was found that the numbers of measurement locations needed to attain these confidence levels were 55, 78, and 96, respectively.

  19. Algorithmic height compression of unordered trees.

    PubMed

    Ben-Naoum, Farah; Godin, Christophe

    2016-01-21

    By nature, tree structures frequently present similarities between their sub-parts. Making use of this redundancy, different types of tree compression techniques have been designed in the literature to reduce the complexity of tree structures. A popular and efficient way to compress a tree consists of merging its isomorphic subtrees, which produces a directed acyclic graph (DAG) equivalent to the original tree. An important property of this method is that the compressed structure (i.e. the DAG) has the same height as the original tree, thus limiting partially the possibility of compression. In this paper we address the problem of further compressing this DAG in height. The difficulty is that compression must be carried out on substructures that are not exactly isomorphic as they are strictly nested within each-other. We thus introduced a notion of quasi-isomorphism between subtrees that makes it possible to define similar patterns along any given path in a tree. We then proposed an algorithm to detect these patterns and to merge them, thus leading to compressed structures corresponding to DAGs augmented with return edges. In this way, redundant information is removed from the original tree in both width and height, thus achieving minimal structural compression. The complete compression algorithm is then illustrated on the compression of various plant-like structures. PMID:26551155

  20. The engineering institute of Los Alamos National Laboratory

    SciTech Connect

    Farrar, Charles R; Park, Gyuhae; Cornwell, Phillip J; Todd, Michael D

    2008-01-01

    Los Alamos National Laboratory (LANL) and the University of California, San Diego (UCSD) have taken the unprecedented step of creating a collaborative, multi-disciplinary graduate education program and associated research agenda called the Engineering Institute. The mission of the Engineering Institute is to develop a comprehensive approach for conducting LANL mission-driven, multidisciplinary engineering research and to improve recruiting, revitalization, and retention of the current and future staff necessary to support the LANL' s national security responsibilities. The components of the Engineering Institute are (1) a joint LANL/UCSD degree program, (2) joint LANL/UCSD research projects, (3) the Los Alamos Dynamic Summer School, (4) an annual workshop, and (5) industry short courses. This program is a possible model for future industry/government interactions with university partners.

  1. Tiger Team Assessment of the Los Alamos National Laboratory

    SciTech Connect

    Not Available

    1991-11-01

    This report documents the Tiger Team Assessment of the Los Alamos National Laboratory (LANL) located in Los Alamos, New Mexico. LANL is operated for the US Department of Energy (DOE) by the University of California. The Tiger Team Assessment was conducted from September 23 to November 8, 1991, under the auspices of the DOE Office of Special Projects, Office of Assistant Secretary for Environment, Safety and Health. The assessment was comprehensive, encompassing environmental, safety, and health (ES H) disciplines; management; and contractor and DOE self-assessments. Compliance with applicable Federal, state, and local regulations; applicable DOE Orders; best management practices; and internal LANL site requirements was assessed. In addition, an evaluation of the adequacy and effectiveness of the DOE and the site contractors' management of ES H/quality assurance programs was conducted. This volume discusses findings concerning the environmental assessment.

  2. Airport-Noise Levels and Annoyance Model (ALAMO) user's guide

    NASA Technical Reports Server (NTRS)

    Deloach, R.; Donaldson, J. L.; Johnson, M. J.

    1986-01-01

    A guide for the use of the Airport-Noise Level and Annoyance MOdel (ALAMO) at the Langley Research Center computer complex is provided. This document is divided into 5 primary sections, the introduction, the purpose of the model, and an in-depth description of the following subsystems: baseline, noise reduction simulation and track analysis. For each subsystem, the user is provided with a description of architecture, an explanation of subsystem use, sample results, and a case runner's check list. It is assumed that the user is familiar with the operations at the Langley Research Center (LaRC) computer complex, the Network Operating System (NOS 1.4) and CYBER Control Language. Incorporated within the ALAMO model is a census database system called SITE II.

  3. Penetrating radiation: applications at Los Alamos National Laboratory

    NASA Astrophysics Data System (ADS)

    Watson, Scott; Hunter, James; Morris, Christopher

    2013-09-01

    Los Alamos has used penetrating radiography extensively throughout its history dating back to the Manhattan Project where imaging dense, imploding objects was the subject of intense interest. This interest continues today as major facilities like DARHT1 have become the mainstay of the US Stockpile Stewardship Program2 and the cornerstone of nuclear weapons certification. Meanwhile, emerging threats to national security from cargo containers and improvised explosive devices (IEDs) have invigorated inspection efforts using muon tomography, and compact x-ray radiography. Additionally, unusual environmental threats, like those from underwater oil spills and nuclear power plant accidents, have caused renewed interest in fielding radiography in severe operating conditions. We review the history of penetrating radiography at Los Alamos and survey technologies as presently applied to these important problems.

  4. Using the Internet in Middle Schools: A Model for Success. A Collaborative Effort between Los Alamos National Laboratory (LANL) and Los Alamos Middle School (LAMS).

    ERIC Educational Resources Information Center

    Addessio, Barbara K.; And Others

    Los Alamos National Laboratory (LANL) developed a model for school networking using Los Alamos Middle School as a testbed. The project was a collaborative effort between the school and the laboratory. The school secured administrative funding for hardware and software; and LANL provided the network architecture, installation, consulting, and…

  5. Automated medical information system of the Los Alamos Scientific Laboratory

    SciTech Connect

    Eagan, G.D.; Grier, R.S.

    1980-01-01

    The Medical Information System (MIS) at the Los Alamos Scientific Laboratory automates the acquisition, storage, and retrieval of medical information concerning the nine thousand project-connected personnel. The MIS incorporates an on-line, interactive medical history questionnaire, mark sense form processing, and automated coronary risk assesment in the medical evaluation process. Also, MIS has created the ability for long-term study and comparison of employee health as well as made the physician's time more effective.

  6. Los Alamos Canyon Ice Rink Parking Flood Plain Assessment

    SciTech Connect

    Hathcock, Charles Dean

    2015-02-10

    The project location is in Los Alamos Canyon east of the ice rink facility at the intersection of West and Omega roads (Figure 1). Forty eight parking spaces will be constructed on the north and south side of Omega Road, and a lighted walking path will be constructed to the ice rink. Some trees will be removed during this action. A guardrail of approximately 400 feet will be constructed along the north side of West Road to prevent unsafe parking in that area.

  7. Evolution of some Los Alamos flux compression programs

    SciTech Connect

    Fowler, C.M.; Goforth, J.H.

    1996-12-31

    When we were approached to give a general discussion of some aspects of the Los Alamos flux compression program, we decided to present historical backgrounds of a few topics that have some relevance to programs that we very much In the forefront of activities going on today. Of some thirty abstracts collected at Los Alamos for this conference, ten of them dealt with electromagnetic acceleration of materials, notably the compression of heavy liners, and five dealt with plasma compression. Both of these topics have been under investigation, off and on, from the time a formal flux compression program was organized at Los Alamos. We decided that a short overview of work done In these areas would be of some interest. Some of the work described below has been discussed in Laboratory reports that, while referenced and available, are not readily accessible. For completeness, some previously published, accessible work Is also discussed but much more briefly. Perhaps the most striking thing about the early work In these two areas is how primitive much of it was when compared to the far more sophisticated, related activities of today. Another feature of these programs, actually for most programs, Is their cyclic nature. Their relevance and/or funding seems to come land go. Eventually, many of the older programs come back into favor. Activities Involving the dense plasma focus (DPF), about which some discussions will be given later, furnish a classic example of this kind, coming Into and then out of periods of heightened interest. We devote the next two sections of this paper to a review of our work In magnetic acceleration of solids and of plasma compression. A final section gives a survey of our work In which thin foils are imploded to produce intense quantities of son x-rays. The authors are well aware of much excellent work done elsewhere In all of these topics, but partly because of space limitations, have confined this discussion to work done at Los Alamos.

  8. Los Alamos Science: The Human Genome Project. Number 20, 1992

    DOE R&D Accomplishments Database

    Cooper, N. G.; Shea, N. eds.

    1992-01-01

    This document provides a broad overview of the Human Genome Project, with particular emphasis on work being done at Los Alamos. It tries to emphasize the scientific aspects of the project, compared to the more speculative information presented in the popular press. There is a brief introduction to modern genetics, including a review of classic work. There is a broad overview of the Genome Project, describing what the project is, what are some of its major five-year goals, what are major technological challenges ahead of the project, and what can the field of biology, as well as society expect to see as benefits from this project. Specific results on the efforts directed at mapping chromosomes 16 and 5 are discussed. A brief introduction to DNA libraries is presented, bearing in mind that Los Alamos has housed such libraries for many years prior to the Genome Project. Information on efforts to do applied computational work related to the project are discussed, as well as experimental efforts to do rapid DNA sequencing by means of single-molecule detection using applied spectroscopic methods. The article introduces the Los Alamos staff which are working on the Genome Project, and concludes with brief discussions on ethical, legal, and social implications of this work; a brief glimpse of genetics as it may be practiced in the next century; and a glossary of relevant terms.

  9. Overview of laser technology at Los Alamos National Laboratory

    SciTech Connect

    Lewis, G.K.; Cremers, D.A.

    1994-09-01

    Los Alamos National Laboratory has had a long history of involvement in laser sciences and has been recognized both for its large laser programs and smaller scale developments in laser technology and applications. The first significant program was with the Rover nuclear-based rocket propulsion system in 1968 to study laser initiated fusion. From here applications spread to programs in laser isotope separation and development of large lasers for fusion. These programs established the technological human resource base of highly trained laser physicists, engineers, and chemists that remain at the Laboratory today. Almost every technical division at Los Alamos now has some laser capability ranging from laser development, applications, studies on nonlinear processes, modeling and materials processing. During the past six years over eight R&D-100 Awards have been received by Los Alamos for development of laser-based techniques and instrumentation. Outstanding examples of technology developed include LIDAR applications to environmental monitoring, single molecule detection using fluorescence spectroscopy, a laser-based high kinetic energy source of oxygen atoms produced by a laser-sustained plasma, laser-induced breakdown spectroscopy (LIBS) for compositional, analysis, thin film high temperature superconductor deposition, multi-station laser welding, and direct metal deposition and build-up of components by fusing powder particles with a laser beam.

  10. Los Alamos, Toshiba probing Fukushima with cosmic rays

    ScienceCinema

    Morris, Christopher

    2016-07-12

    Los Alamos National Laboratory has announced an impending partnership with Toshiba Corporation to use a Los Alamos technique called muon tomography to safely peer inside the cores of the Fukushima Daiichi reactors and create high-resolution images of the damaged nuclear material inside without ever breaching the cores themselves. The initiative could reduce the time required to clean up the disabled complex by at least a decade and greatly reduce radiation exposure to personnel working at the plant. Muon radiography (also called cosmic-ray radiography) uses secondary particles generated when cosmic rays collide with upper regions of Earth's atmosphere to create images of the objects that the particles, called muons, penetrate. The process is analogous to an X-ray image, except muons are produced naturally and do not damage the materials they contact. Muon radiography has been used before in imaginative applications such as mapping the interior of the Great Pyramid at Giza, but Los Alamos's muon tomography technique represents a vast improvement over earlier technology.

  11. Los Alamos, Toshiba probing Fukushima with cosmic rays

    SciTech Connect

    Morris, Christopher

    2014-06-16

    Los Alamos National Laboratory has announced an impending partnership with Toshiba Corporation to use a Los Alamos technique called muon tomography to safely peer inside the cores of the Fukushima Daiichi reactors and create high-resolution images of the damaged nuclear material inside without ever breaching the cores themselves. The initiative could reduce the time required to clean up the disabled complex by at least a decade and greatly reduce radiation exposure to personnel working at the plant. Muon radiography (also called cosmic-ray radiography) uses secondary particles generated when cosmic rays collide with upper regions of Earth's atmosphere to create images of the objects that the particles, called muons, penetrate. The process is analogous to an X-ray image, except muons are produced naturally and do not damage the materials they contact. Muon radiography has been used before in imaginative applications such as mapping the interior of the Great Pyramid at Giza, but Los Alamos's muon tomography technique represents a vast improvement over earlier technology.

  12. James L. Tuck Los Alamos ball lightning pioneer

    SciTech Connect

    Baker, D.A.

    1999-07-01

    James Tuck was well known for starting the Project Sherwood group at Los Alamos Scientific Laboratory in 1952. This group was formed to study and develop concepts for controlled fusion energy. In his later years after retiring from Controlled Fusion Division, he continued research at Los Alamos on the topic of ball lightning. He traveled widely giving lectures on both observations of others and his own experimental efforts. He collected anecdotal observations obtained from those in his lecture audiences during his travels and from responses from newspaper articles where he asked for specific information from ball lightning observers. He finally cut off this collection of data when the number of responses became overwhelming. The author's primary publication on ball lightning was a short laboratory report. He planned on publishing a book on the subject but this was never completed before his death. Tuck focused his experimental effort on attempting to duplicate the production of plasma balls claimed to be observed in US Navy submarines when a switch was opened under overload conditions with battery power. During lunch breaks he made use of a Los Alamos N-division battery bank facility to mock up a submarine power pack and switch gear. This non-funded effort was abruptly terminated when an explosion occurred in the facility. An overview of Tuck's research and views will be given. The flavor Jim's personality as well as a ball produced with his experimental apparatus will be shown using video chips.

  13. Los Alamos Science: The Human Genome Project. Number 20, 1992

    SciTech Connect

    Cooper, N G; Shea, N

    1992-01-01

    This article provides a broad overview of the Human Genome Project, with particular emphasis on work being done at Los Alamos. It tries to emphasize the scientific aspects of the project, compared to the more speculative information presented in the popular press. There is a brief introduction to modern genetics, including a review of classic work. There is a broad overview of the Genome Project, describing what the project is, what are some of its major five-year goals, what are major technological challenges ahead of the project, and what can the field of biology, as well as society expect to see as benefits from this project. Specific results on the efforts directed at mapping chromosomes 16 and 5 are discussed. A brief introduction to DNA libraries is presented, bearing in mind that Los Alamos has housed such libraries for many years prior to the Genome Project. Information on efforts to do applied computational work related to the project are discussed, as well as experimental efforts to do rapid DNA sequencing by means of single-molecule detection using applied spectroscopic methods. The article introduces the Los Alamos staff which are working on the Genome Project, and concludes with brief discussions on ethical, legal, and social implications of this work; a brief glimpse of genetics as it may be practiced in the next century; and a glossary of relevant terms.

  14. Meta-analysis of Dense Genecentric Association Studies Reveals Common and Uncommon Variants Associated with Height

    PubMed Central

    Lanktree, Matthew B.; Guo, Yiran; Murtaza, Muhammed; Glessner, Joseph T.; Bailey, Swneke D.; Onland-Moret, N. Charlotte; Lettre, Guillaume; Ongen, Halit; Rajagopalan, Ramakrishnan; Johnson, Toby; Shen, Haiqing; Nelson, Christopher P.; Klopp, Norman; Baumert, Jens; Padmanabhan, Sandosh; Pankratz, Nathan; Pankow, James S.; Shah, Sonia; Taylor, Kira; Barnard, John; Peters, Bas J.; M. Maloney, Cliona; Lobmeyer, Maximilian T.; Stanton, Alice; Zafarmand, M. Hadi; Romaine, Simon P.R.; Mehta, Amar; van Iperen, Erik P.A.; Gong, Yan; Price, Tom S.; Smith, Erin N.; Kim, Cecilia E.; Li, Yun R.; Asselbergs, Folkert W.; Atwood, Larry D.; Bailey, Kristian M.; Bhatt, Deepak; Bauer, Florianne; Behr, Elijah R.; Bhangale, Tushar; Boer, Jolanda M.A.; Boehm, Bernhard O.; Bradfield, Jonathan P.; Brown, Morris; Braund, Peter S.; Burton, Paul R.; Carty, Cara; Chandrupatla, Hareesh R.; Chen, Wei; Connell, John; Dalgeorgou, Chrysoula; Boer, Anthonius de; Drenos, Fotios; Elbers, Clara C.; Fang, James C.; Fox, Caroline S.; Frackelton, Edward C.; Fuchs, Barry; Furlong, Clement E.; Gibson, Quince; Gieger, Christian; Goel, Anuj; Grobbee, Diederik E.; Hastie, Claire; Howard, Philip J.; Huang, Guan-Hua; Johnson, W. Craig; Li, Qing; Kleber, Marcus E.; Klein, Barbara E.K.; Klein, Ronald; Kooperberg, Charles; Ky, Bonnie; LaCroix, Andrea; Lanken, Paul; Lathrop, Mark; Li, Mingyao; Marshall, Vanessa; Melander, Olle; Mentch, Frank D.; J. Meyer, Nuala; Monda, Keri L.; Montpetit, Alexandre; Murugesan, Gurunathan; Nakayama, Karen; Nondahl, Dave; Onipinla, Abiodun; Rafelt, Suzanne; Newhouse, Stephen J.; Otieno, F. George; Patel, Sanjey R.; Putt, Mary E.; Rodriguez, Santiago; Safa, Radwan N.; Sawyer, Douglas B.; Schreiner, Pamela J.; Simpson, Claire; Sivapalaratnam, Suthesh; Srinivasan, Sathanur R.; Suver, Christine; Swergold, Gary; Sweitzer, Nancy K.; Thomas, Kelly A.; Thorand, Barbara; Timpson, Nicholas J.; Tischfield, Sam; Tobin, Martin; Tomaszweski, Maciej; Verschuren, W.M. Monique; Wallace, Chris; Winkelmann, Bernhard; Zhang, Haitao; Zheng, Dongling; Zhang, Li; Zmuda, Joseph M.; Clarke, Robert; Balmforth, Anthony J.; Danesh, John; Day, Ian N.; Schork, Nicholas J.; de Bakker, Paul I.W.; Delles, Christian; Duggan, David; Hingorani, Aroon D.; Hirschhorn, Joel N.; Hofker, Marten H.; Humphries, Steve E.; Kivimaki, Mika; Lawlor, Debbie A.; Kottke-Marchant, Kandice; Mega, Jessica L.; Mitchell, Braxton D.; Morrow, David A.; Palmen, Jutta; Redline, Susan; Shields, Denis C.; Shuldiner, Alan R.; Sleiman, Patrick M.; Smith, George Davey; Farrall, Martin; Jamshidi, Yalda; Christiani, David C.; Casas, Juan P.; Hall, Alistair S.; Doevendans, Pieter A.; D. Christie, Jason; Berenson, Gerald S.; Murray, Sarah S.; Illig, Thomas; Dorn, Gerald W.; Cappola, Thomas P.; Boerwinkle, Eric; Sever, Peter; Rader, Daniel J.; Reilly, Muredach P.; Caulfield, Mark; Talmud, Philippa J.; Topol, Eric; Engert, James C.; Wang, Kai; Dominiczak, Anna; Hamsten, Anders; Curtis, Sean P.; Silverstein, Roy L.; Lange, Leslie A.; Sabatine, Marc S.; Trip, Mieke; Saleheen, Danish; Peden, John F.; Cruickshanks, Karen J.; März, Winfried; O'Connell, Jeffrey R.; Klungel, Olaf H.; Wijmenga, Cisca; Maitland-van der Zee, Anke Hilse; Schadt, Eric E.; Johnson, Julie A.; Jarvik, Gail P.; Papanicolaou, George J.; Grant, Struan F.A.; Munroe, Patricia B.; North, Kari E.; Samani, Nilesh J.; Koenig, Wolfgang; Gaunt, Tom R.; Anand, Sonia S.; van der Schouw, Yvonne T.; Soranzo, Nicole; FitzGerald, Garret A.; Reiner, Alex; Hegele, Robert A.; Hakonarson, Hakon; Keating, Brendan J.

    2011-01-01

    Height is a classic complex trait with common variants in a growing list of genes known to contribute to the phenotype. Using a genecentric genotyping array targeted toward cardiovascular-related loci, comprising 49,320 SNPs across approximately 2000 loci, we evaluated the association of common and uncommon SNPs with adult height in 114,223 individuals from 47 studies and six ethnicities. A total of 64 loci contained a SNP associated with height at array-wide significance (p < 2.4 × 10−6), with 42 loci surpassing the conventional genome-wide significance threshold (p < 5 × 10−8). Common variants with minor allele frequencies greater than 5% were observed to be associated with height in 37 previously reported loci. In individuals of European ancestry, uncommon SNPs in IL11 and SMAD3, which would not be genotyped with the use of standard genome-wide genotyping arrays, were strongly associated with height (p < 3 × 10−11). Conditional analysis within associated regions revealed five additional variants associated with height independent of lead SNPs within the locus, suggesting allelic heterogeneity. Although underpowered to replicate findings from individuals of European ancestry, the direction of effect of associated variants was largely consistent in African American, South Asian, and Hispanic populations. Overall, we show that dense coverage of genes for uncommon SNPs, coupled with large-scale meta-analysis, can successfully identify additional variants associated with a common complex trait. PMID:21194676

  15. Comparing remotely sensed Pictometry Web-based height estimates with in situ clinometer and laser range finder height estimates

    NASA Astrophysics Data System (ADS)

    Unger, Daniel R.; Hung, I.-Kuai; Kulhavy, David L.

    2014-01-01

    Heights of 30 light poles were measured with a telescopic height pole. Clinometer and laser range finder in situ estimated light pole height was compared to Pictometry estimated light pole height using hyperspatial 4-in. (10.2-cm) multispectral imagery within a Web-based interface. Average percent agreement between light pole height and clinometer and laser range finder estimated that light pole height ranged from 3.97% to 3.79% for clinometer and laser range finder estimated light pole height, respectively. Average percent agreement between light pole height and Pictometry estimated light pole height at image magnification factors of 100%, 125%, 150%, 200%, and 300% magnification ranged from 1.77% to 2.39%. Root-mean-square error (RMSE) between light pole height and clinometer and laser range finder estimated that light pole height ranged from 0.22 to 0.20 m for clinometer and laser range finder estimated light pole height, respectively. RMSE between light pole height and Pictometry estimated light pole height ranged from 0.10 to 0.14 m. An analysis of variance between absolute errors of light pole height estimate by different techniques indicated that Pictometry was significantly more accurate than both clinometer and laser range finder light pole height estimates.

  16. The concept of energy height in animal locomotion: separating mechanics from physiology.

    PubMed

    Pennycuick, C J

    2003-09-21

    The distance flown in gliding is proportional to the starting height, not to the starting potential energy, and it is independent of the body mass. By analogy, in powered flight, the quantity of stored fuel can be converted into a virtual "fuel energy height", defined as the height to which the fuel energy could lift the bird against gravity, if it were converted into work. This is a logarithmic function of the fuel fraction, not of the absolute amount of fuel, or of the body mass. It takes account of the strength of gravity, and of the efficiency with which fuel energy is converted into work. The "performance number" is the gradient on which a migrating bird comes "down" from its initial fuel energy height. It is mechanical (not physiological) in character, and corresponds to the lift:drag ratio in a fixed-wing aircraft. The concept of range as an initial energy height multiplied by a performance number can also be applied to swimming and running animals. Performance number, and also the related variable "cost of transport", are both independent of gravity in flying and running, but not in swimming. Migration by thermal soaring is analogous to powered flight with stopovers, except that the bird replenishes its potential energy by climbing in thermals, rather than replenishing fuel energy during stopovers. Rates of climb in thermals are typically higher than fuel energy rates of climb, but the available height band is two orders of magnitude smaller, and the intervals at which energy replenishment is needed are correspondingly shorter. Albatrosses replenish their kinetic energy by exploiting discontinuities in the wind flow over waves, requiring replenishment at intervals of tens of seconds, a further two orders of magnitude shorter than in thermal soaring. Fat energy height can be used as a measure of "condition", which is independent of the size or type of the animal. The fat energy height at which a migrant must arrive on the breeding grounds, in order to breed

  17. Effect of the capillary meniscus height on the instability of large Prandtl number Czochralski melt flow

    NASA Astrophysics Data System (ADS)

    Miroshnichenko, E.; Kit, E.; Gelfgat, A. Yu.

    2016-11-01

    Effect of the capillary meniscus on the instability of large Prandtl number Czochralski melt flow is studied experimentally. The measurements are conducted in two experimental facilities by two independent non-intrusive optical techniques. The quantitative results are presented as dependencies of the critical Grashof number (critical temperature difference) on the meniscus height for different Prandtl numbers, radii and aspect ratios. The results show that with increase of the meniscus height the critical temperature difference noticeably grows and sometimes doubles. Recently reported parametric relations for the critical Grashof number and oscillations frequency are extended to include parameters of the meniscus.

  18. Stellar refraction - A tool to monitor the height of the tropopause from space

    NASA Technical Reports Server (NTRS)

    Schuerman, D. W.; Giovane, F.; Greenberg, J. M.

    1975-01-01

    Calculations of stellar refraction for a setting or rising star as viewed from a spacecraft show that the tropopause is a discernible feature in a plot of refraction vs time. The height of the tropopause is easily obtained from such a plot. Since the refraction suffered by the starlight appears to be measurable with some precision from orbital altitudes, this technique is suggested as a method for remotely monitoring the height of the tropopause. Although limited to nighttime measurements, the method is independent of supporting data or model fitting and easily lends itself to on-line data reduction.

  19. A history of the working group to address Los Alamos community health concerns - A case study of community involvement and risk communication

    SciTech Connect

    Harry Otway; Jon Johnson

    2000-01-01

    In May 1991, at a Department of Energy (DOE) public hearing at Los Alamos, New Mexico, a local artist claimed there had been a recent brain tumor cluster in a small Los Alamos neighborhood. He suggested the cause was radiation from past operations of Los Alamos National Laboratory. Data from the Laboratory's extensive environmental monitoring program gave no reason to believe this charge to be true but also could not prove it false. These allegations, reported in the local and regional media, alarmed the community and revealed an unsuspected lack of trust in the Laboratory. Having no immediate and definitive response, the Laboratory offered to collaborate with the community to address this concern. The Los Alamos community accepted this offer and a joint Community-Laboratory Working Group met for the first time 29 days later. The working group set as its primary goal the search for possible carcinogens in the local environment. Meanwhile, the DOE announced its intention to fund the New Mexico Department of Health to perform a separate and independent epidemiological study of all Los Alamos cancer rates. In early 1994, after commissioning 17 environmental studies and meeting 34 times, the working group decided that the public health concerns had been resolved to the satisfaction of the community and voted to disband. This paper tells the story of the artist and the working group, and how the media covered their story. It summarizes the environmental studies directed by the working group and briefly reviews the main findings of the epidemiology study. An epilogue records the present-day recollections of some of the key players in this environmental drama.

  20. Radionuclide contaminant analysis of small mammals at Area G, TA-54, Los Alamos National Laboratory, 1995

    SciTech Connect

    Bennett, K.; Biggs, J.; Fresquez, P.

    1997-01-01

    At Los Alamos National Laboratory, small mammals were sampled at two waste burial sites (Site 1-recently disturbed and Site 2-partially disturbed) at Area G, Technical Area 54 and a control site on Frijoles Mesa (Site 4) in 1995. Our objectives were (1) to identify radionuclides that are present within surface and subsurface soils at waste burial sites, (2) to compare the amount of radionuclide uptake by small mammals at waste burial sites to a control site, and (3) to identify if the primary mode of contamination to small mammals is by surface contact or ingestion/inhalation. Three composite samples of at least rive animals per sample were collected at each site. Pelts and carcasses of each animal were separated and analyzed independently. Samples were analyzed for {sup 241}Am, {sup 90}Sr , {sup 238}Pu, {sup 239}Pu, total U, {sup 137}Cs, and {sup 3}H. Significantly higher (parametric West at p=0.05) levels of total U, {sup 241}Am, {sup 238}Pu and {sup 239}Pu were detected in pelts than in carcasses of small mammals at TA-54. Concentrations of other measured radionuclides in carcasses were nearly equal to or exceeded the mean concentrations in the pelts. Our results show higher concentrations in pelts compared to carcasses, which is similar to what has been found at waste burial/contaminated sites outside of Los Alamos National Laboratory. Site 1 had a significantly higher (alpha=0.05, P=0.0125) mean tritium concentration in carcasses than Site 2 or Site 4. In addition Site 1 also had a significantly higher (alpha=0.05, p=0.0024) mean tritium concentration in pelts than Site 2 or Site 4. Site 2 had a significantly higher (alpha=0.05, P=0.0499) mean {sup 239}Pu concentration in carcasses than either Site 1 or Site 4.

  1. Quantification of gait changes in subjects with visual height intolerance when exposed to heights

    PubMed Central

    Schniepp, Roman; Kugler, Günter; Wuehr, Max; Eckl, Maria; Huppert, Doreen; Huth, Sabrina; Pradhan, Cauchy; Jahn, Klaus; Brandt, Thomas

    2014-01-01

    Introduction: Visual height intolerance (vHI) manifests as instability at heights with apprehension of losing balance or falling. We investigated contributions of visual feedback and attention on gait performance of subjects with vHI. Materials and Methods: Sixteen subjects with vHI walked over a gait mat (GAITRite®) on a 15-m-high balcony and at ground-level. Subjects walked at different speeds (slow, preferred, fast), during changes of the visual input (gaze straight/up/down; eyes open/closed), and while doing a cognitive task. An rmANOVA with the factors “height situation” and “gait condition” was performed. Subjects were also asked to estimate the height of the balcony over ground level. The individual estimates were used for correlations with the gait parameters. Results: Study participants walked slower at heights, with reduced cadence and stride length. The double support phases were increased (all p < 0.01), which correlated with the estimated height of the balcony (R2 = 0.453, p < 0.05). These changes were still present when walking with upward gaze or closure of the eyes. Under the conditions walking and looking down to the floor of the balcony, during dual-task and fast walking, there were no differences between the gait performance on the balcony and at ground-level. Discussion: The found gait changes are features of a cautious gait control. Internal, cognitive models with anxiety play an important role for vHI; gait was similarly affected when the visual perception of the depth was prevented. Improvement by dual task at heights may be associated by a reduction of the anxiety level. Conclusion: It is conceivable that mental distraction by dual task or increasing the walking speed might be useful recommendations to reduce the imbalance during locomotion in subjects susceptible to vHI. PMID:25538595

  2. The mean sea surface height and geoid along the Geosat subtrack from Bermuda to Cape Cod

    NASA Astrophysics Data System (ADS)

    Kelly, Kathryn A.; Joyce, Terrence M.; Schubert, David M.; Caruso, Michael J.

    1991-07-01

    Measurements of near-surface velocity and concurrent sea level along an ascending Geosat subtrack were used to estimate the mean sea surface height and the Earth's gravitational geoid. Velocity measurements were made on three traverses of a Geosat subtrack within 10 days, using an acoustic Doppler current profiler (ADCP). A small bias in the ADCP velocity was removed by considering a mass balance for two pairs of triangles for which expendable bathythermograph measurements were also made. Because of the large curvature of the Gulf Stream, the gradient wind balance was used to estimate the cross-track component of geostrophic velocity from the ADCP vectors; this component was then integrated to obtain the sea surface height profile. The mean sea surface height was estimated as the difference between the instantaneous sea surface height from ADCP and the Geosat residual sea level, with mesoscale errors reduced by low-pass filtering. The error estimates were divided into a bias, tilt, and mesoscale residual; the bias was ignored because profiles were only determined within a constant of integration. The calculated mean sea surface height estimate agreed with an independent estimate of the mean sea surface height from Geosat, obtained by modeling the Gulf Stream as a Gaussian jet, within the expected errors in the estimates: the tilt error was 0.10 m, and the mesoscale error was 0.044 m. To minimize mesoscale errors in the estimate, the alongtrack geoid estimate was computed as the difference between the mean sea level from the Geosat Exact Repeat Mission and an estimate of the mean sea surface height, rather than as the difference between instantaneous profiles of sea level and sea surface height. In the critical region near the Gulf Stream the estimated error reduction using this method was about 0.07 m. Differences between the geoid estimate and a gravimetric geoid were not within the expected errors: the rms mesoscale difference was 0.24 m rms.

  3. Population genetic differentiation of height and body mass index across Europe

    PubMed Central

    Robinson, Matthew R.; Hemani, Gibran; Medina-Gomez, Carolina; Mezzavilla, Massimo; Esko, Tonu; Shakhbazov, Konstantin; Powell, Joseph E.; Vinkhuyzen, Anna; Berndt, Sonja I.; Gustafsson, Stefan; Justice, Anne E.; Kahali, Bratati; Locke, Adam E.; Pers, Tune H.; Vedantam, Sailaja; Wood, Andrew R.; van Rheenen, Wouter; Andreassen, Ole A.; Gasparini, Paolo; Metspalu, Andres; van den Berg, Leonard H.; Veldink, Jan H.; Rivadeneira, Fernando; Werge, Thomas M.; Abecasis, Goncalo R.; Boomsma, Dorret I.; Chasman, Daniel I.; de Geus, Eco J.C.; Frayling, Timothy M.; Hirschhorn, Joel N.; Hottenga, Jouke Jan; Ingelsson, Erik; Loos, Ruth J.F.; Magnusson, Patrik K. E.; Martin, Nicholas G.; Montgomery, Grant W.; North, Kari E.; Pedersen, Nancy L.; Spector, Timothy D.; Speliotes, Elizabeth K.; Goddard, Michael E.; Yang, Jian; Visscher, Peter M.

    2016-01-01

    Across-nation differences in the mean of complex traits such as obesity and stature are common1–8, but the reasons for these differences are not known. Here, we find evidence that many independent loci of small effect combine to create population genetic differences in height and body mass index (BMI) in a sample of 9,416 individuals across 14 European countries. Using discovery data on over 250,000 individuals and unbiased estimates of effect sizes from 17,500 sib pairs, we estimate that 24% (95% CI: 9%, 41%) and 8% (95% CI: 4%, 16%) of the captured additive genetic variance for height and BMI across Europe are attributed to among-population genetic differences. Population genetic divergence differed significantly from that expected under a null model (P <3.94e−08 for height and P<5.95e−04 for BMI), and we find an among-population genetic correlation for tall and slender nations (r = −0.80 (95% CI: −0.95, −0.60), contrasting no genetic correlation between height and BMI within populations (r = −0.016, 95% CI: −0.041, 0.001), consistent with selection on height genes that also act to reduce BMI. Observations of mean height across nations correlated with the predicted genetic means for height (r = 0.51, P<0.001), so that a proportion of observed differences in height within Europe reflect genetic factors. In contrast, observed mean BMI did not correlate with the genetic estimates (P<0.58), implying that genetic differentiation in BMI is masked by environmental differences across Europe. PMID:26366552

  4. MULTI-CHANNEL PULSE HEIGHT ANALYZER

    DOEpatents

    Boyer, K.; Johnstone, C.W.

    1958-11-25

    An improved multi-channel pulse height analyzer of the type where the device translates the amplitude of each pulse into a time duration electrical quantity which is utilized to control the length of a train of pulses forwarded to a scaler is described. The final state of the scaler for any one train of pulses selects the appropriate channel in a magnetic memory in which an additional count of one is placed. The improvement consists of a storage feature for storing a signal pulse so that in many instances when two signal pulses occur in rapid succession, the second pulse is preserved and processed at a later time.

  5. Predicting height increment of young-growth red fir in California and southern Oregon. Forest Service research paper (Final)

    SciTech Connect

    Dolph, K.L.

    1992-11-01

    An equation is given to estimate 10-year height increment for young-growth red fir trees in California and Southern Oregon. The independent variables are the individual tree, stand, and site characteristics significantly related to a tree's height growth. Data used to develop the equation came from stem analysis of 492 trees sampled from 56 stands in the study area. Parameter estimates for the predictive equation were obtained using least-squares linear regression.

  6. Higher Height, Higher Ability: Judgment Confidence as a Function of Spatial Height Perception

    PubMed Central

    Sun, Yan; Wang, Fei; Li, Shu

    2011-01-01

    Based on grounded cognition theories, the current study showed that judgments about ability were regulated by the subjects' perceptions of their spatial height. In Experiment 1, we found that after seeing the ground from a higher rather than lower floor, people had higher expectations about their performance on a knowledge test and assigned themselves higher rank positions in a peer comparison evaluation. In Experiment 2, we examined the boundary conditions of the spatial height effects and showed that it could still occur even if we employed photos rather than actual building floors to manipulate the perceptions of spatial heights. In addition, Experiment 2 excluded processing style as an explanation for these observations. In Experiment 3, we investigated a potential mechanism for the spatial height effect by manipulating the scale direction in the questionnaire. Consequently, consistent with our representational dependence account, the effect of spatial heights on ability judgments was eliminated when the mental representation of ability was disturbed by a reverse physical representation. These results suggest that people's judgments about their ability are correlated with their spatial perception. PMID:21818299

  7. Reaching new heights: Comparing interpretation bias modification to exposure therapy for extreme height fear

    PubMed Central

    Steinman, Shari A.; Teachman, Bethany A.

    2014-01-01

    Objective Cognitive models of anxiety disorders posit that biases in interpretation maintain, and potentially cause, anxiety. This study tested whether it is possible to decrease height fear symptoms through cognitive bias modification for interpretations (CBM-I). Additionally, the clinical utility of CBM-I was tested by comparing it to an already established treatment: exposure therapy. Method Extremely height fearful (N = 110) individuals participated in the study. Acrophobic symptoms were measured before and after two sessions of CBM-I, and compared to the standard treatment for acrophobia (exposure therapy), a combination of CBM-I and exposure therapy, and a Control condition. Results In line with hypotheses, participants in the three active conditions showed greater response to treatment than the Control condition in height-relevant interpretation bias, symptoms, and behavioral avoidance on a height stressor, with few differences between the active conditions. Further, symptom change was mediated by change in interpretation bias. Conclusions Overall, findings suggest that different pathways to fear reduction (exposure vs. shifting interpretations) can lead to similar reductions in height fear. This study provides the first evidence that directly shifting cognitive processing, even with no therapist involvement, can reduce symptoms as effectively as the gold standard, therapist-directed exposure therapy. PMID:24588406

  8. Using infrasound to constrain ash plume height

    NASA Astrophysics Data System (ADS)

    Lamb, Oliver; De Angelis, Silvio; Lavallée, Yan

    2016-04-01

    Airborne volcanic ash advisories are currently based on analyses of satellite imagery with relatively low temporal resolution, and numerical simulations of atmospheric plume dispersion. These simulations rely on key input parameters such as the maximum height of eruption plumes and the mass eruption rate at the vent, which remain loosely constrained. In this study, we present a proof-of-concept workflow that incorporates the analysis of volcanic infrasound with numerical modelling of volcanic plume rise in a realistic atmosphere. We analyse acoustic infrasound records from two explosions during the 2009 eruption of Mt. Redoubt, USA, that produced plumes reaching heights of 12-14 km. We model the infrasonic radiation at the source under the assumptions of linear acoustic theory and calculate variations in mass ejection velocity at the vent. The estimated eruption velocities serve as the input for numerical models of plume rise. The encouraging results highlight the potential for infrasound measurements to be incorporated into numerical modelling of ash dispersion, and confirm their value for volcano monitoring operations.

  9. Meniscus height controlled convective self-assembly

    NASA Astrophysics Data System (ADS)

    Choudhary, Satyan; Crosby, Alfred

    Convective self-assembly techniques based on the 'coffee-ring effect' allow for the fabrication of materials with structural hierarchy and multi-functionality across a wide range of length scales. The coffee-ring effect describes deposition of non-volatiles at the edge of droplet due to capillary flow and pattern formations due to pinning and de-pinning of meniscus with the solvent evaporation. We demonstrate a novel convective self-assembly method which uses a piezo-actuated bending motion for driving the de-pinning step. In this method, a dilute solution of nanoparticles or polymers is trapped by capillary forces between a blade and substrate. As the blade oscillates with a fixed frequency and amplitude and the substrate translates at a fixed velocity, the height of the capillary meniscus oscillates. The meniscus height controls the contact angle of three phase contact line and at a critical angle de-pinning occurs. The combination of convective flux and continuously changing contact angle drives the assembly of the solute and subsequent de-pinning step, providing a direct means for producing linear assemblies. We demonstrate a new method for convective self-assembly at an accelerated rate when compared to other techniques, with control over deposit dimensions. Army Research Office (W911NF-14-1-0185).

  10. Latest Adjustment of the Argentine Height System

    NASA Astrophysics Data System (ADS)

    Piñón, D. A.; Cimbaro, S. R.; Sanchez, R. E.

    2013-05-01

    For over 70 years the National Geographic Institute of Argentina (NGI) has conducted a systematic project to building benchmarks throughout the country, which have been measured with spirit leveling and gravimetry techniques. The measurements were undertaken on a total of approximately 18,000 benchmarks, which define the High Precision Leveling Network of Argentina. The first adjustment of this network took place in 1971. This assignment was given to the Defense Mapping Agency of the United States of America (DMA). Leveling lines that were built and measured after the year 1971 were adjusted to this original network. It was of great importance to perform a new adjustment calculation with modern techniques to update the entire network. Some modern tools worth mentioning are: gravity interpolation using prediction method and topographic correction calculation by the Hammer method using SRTM model. All historical field books were digitalized to retrieve the information corresponding to the spirit leveling, from which it was then possible to calculate geopotential difference between the nodes, using the gravity acceleration values over the benchmarks. Subsequently, by the method of least squares it was possible to calculate the geopotential numbers of the nodes, and then the orthometric height of all the benchmarks. The recommendations of the Working Group III of SIRGAS (Geodetic Reference System for the Americas) were taken into account in relation to this task. The development of this paper shows the results that have been obtained so far in the development of the New Height System for Argentina.

  11. Optimal inflatable space towers of high height

    NASA Astrophysics Data System (ADS)

    Bolonkin, A.

    Author suggested, developed theory, and computed some projects of an optimal inflatable space tower of the heights some hundreds km. These towers can be used for tourism, scientist observation of space, Earth surface, Earth weather, Earth top atmosphere, and for radio, TV, communication transmissions. These towers can be used for launching of the space ships and Earth s atellites. The computed projects not expensive, do not request rockets. They need only in thin strong films composed from the artificial fibers and fabricated by a current industry. Towers can be built by a current technology. Towers can be explored (for tourism, communication, etc.) in a time of the construction process and give a profit, self- financing for further constriction. They can permanent increase their height. The tower design does not request a work at the high altitudes. All construction works will be making at the Earth surface. Author suggests the transport system for this tower of a high capability, which does not request a power energy issue. The small engine (only for a friction compensation) is located at the Earth surface. The tower is separated on sections and has a special protection of a case of a damage. It is considered also the problems of security, control, repair, etc. of the suggested towers. The author has also solved additional problems, which appear in these projects and which can look as difficult for the given proposal and current technology. The author is prepared to discuss the problems with serious organizations, which want to research and develop these projects.

  12. Torch height control helps fabricator raise productivity

    SciTech Connect

    1997-03-01

    For high-speed, high-quality plate cutting with oxyfuel, several control factors are widely recognized to affect cut quality. Flame type and flame adjustment are critical factors. Matching the correct torch tip size and oxygen pressure setting to the precise material composition and exact thickness of the steel plate are essential. Control settings for preheating the fuel and for torch travel speed are equally important. A high-performance drive system is another essential part of the equation. Precisely matched to the exact size, weight and configuration of the gantry or cantilever machine, the right motor and drive combination can provide smoother x-y axis movement for cleaner cuts, less slag and less overall scrap. With the advent of the torch height control sensor for cantilever and gantry machines, there is a new element to consider in the quality equation. These torch-mounted sensor systems are helping some fabricators improve cut quality by making it easier for machine operators to maintain an optimum and consistent distance between the torch tip and the steel plate. Used by many fabricators in Europe for well over a decade, torch height control sensors are beginning to show their value in the United States.

  13. Rain height statistics for satellite communication in Malaysia

    NASA Astrophysics Data System (ADS)

    Mandeep, J. S.

    2008-09-01

    The calculation of fade margin required for 99.99% of the time availability of satellite link requires the knowledge of rain height. There is a shortage of results on rain height over Malaysian equatorial stations. The results on rain height in relation to 0 °C isotherm height (Hi) over four stations are presented. The variations of 0 °C isotherm heights for two monsoon seasons have been studied based on an analysis of radiosonde. The exceedence probability statistics of rain height are compared between the two seasons.

  14. Audit Report, "Fire Protection Deficiencies at Los Alamos National Laboratory"

    SciTech Connect

    2009-06-01

    The Department of Energy's Los Alamos National Laboratory (Los Alamos) maintains some of the Nation's most important national security assets, including nuclear materials. Many of Los Alamos' facilities are located in close proximity to one another, are occupied by large numbers of contract and Federal employees, and support activities ranging from nuclear weapons design to science-related activities. Safeguarding against fires, regardless of origin, is essential to protecting employees, surrounding communities, and national security assets. On June 1, 2006, Los Alamos National Security, LLC (LANS), became the managing and operating contractor for Los Alamos, under contract with the Department's National Nuclear Security Administration (NNSA). In preparation for assuming its management responsibilities at Los Alamos, LANS conducted walk-downs of the Laboratory's facilities to identify pre-existing deficiencies that could give rise to liability, obligation, loss or damage. The walk-downs, which identified 812 pre-existing fire protection deficiencies, were conducted by subject matter professionals, including fire protection experts. While the Los Alamos Site Office has overall responsibility for the effectiveness of the fire protection program, LANS, as the Laboratory's operating contractor, has a major, day-to-day role in minimizing fire-related risks. The issue of fire protection at Los Alamos is more than theoretical. In May 2000, the 'Cerro Grande' fire burned about 43,000 acres, including 7,700 acres of Laboratory property. Due to the risk posed by fire to the Laboratory's facilities, workforce, and surrounding communities, we initiated this audit to determine whether pre-existing fire protection deficiencies had been addressed. Our review disclosed that LANS had not resolved many of the fire protection deficiencies that had been identified in early 2006: (1) Of the 296 pre-existing deficiencies we selected for audit, 174 (59 percent) had not been corrected

  15. Variation in height and knee height in adolescents in Merida, Mexico, by head of household employment level and family income.

    PubMed

    Vázquez-Vázquez, Adriana; Azcorra, Hugo; Falfán, Ina; Dickinson, Federico

    2013-05-01

    Variation in height among young adults has been linked to the living conditions of different social groups. The aim of this study was to measure variation in the height and knee height of young adults by head of household employment level and family income. The sample comprised 180 individuals (90 girls) aged 16 and 17 years living in the city of Merida, Mexico. Height and knee height were measured by anthropometry, and individuals' family social and economic data collected from their mothers. Variation in these measurements was analysed by three categories of employment and family income terciles. One-way ANOVAs were done by sex to compare mean height and knee height by employment and family income. Coefficients of variation were calculated and a Bartlett test applied. Significant differences in height and knee height were observed only between family income terciles. Both sexes were taller at the highest levels of family income (p<0.05) and men had the highest (p<0.05) knee height. Highest family income individuals exhibited the least variation in height and knee height. Similarity in socioeconomic conditions for families in the lowest family income tercile and with employee heads of household was not associated with lower variation of height and knee height.

  16. Do individual-tree growth models correctly represent height:diameter ratios of Norway spruce and Scots pine?

    PubMed

    Vospernik, Sonja; Monserud, Robert A; Sterba, Hubert

    2010-10-15

    Height:diameter ratios are an important measure of stand stability. Because of the importance of height:diameter ratios for forest management, individual-tree growth models should correctly depict height:diameter ratios. In particular, (i) height:diameter ratios should not exceed that of very dense stands, (ii) height:diameter ratios should not fall below that of open-grown trees, (iii) height:diameter ratios should decrease with increasing spacing, (iv) height:diameter ratios for suppressed trees should be higher than ratios for dominant trees. We evaluated the prediction of height:diameter ratios by running four commonly used individual-tree growth models in central Europe: BWIN, Moses, Silva and Prognaus. They represent different subtypes of individual-tree growth models, namely models with and without an explicit growth potential and models that are either distance-dependent (spatial) or distance-independent (non-spatial). Note that none of these simulators predict height:diameter ratios directly. We began by building a generic simulator that contained the relevant equations for diameter increment, height increment, and crown size for each of the four simulators. The relevant measures of competition, site characteristics, and stand statistics were also coded. The advantage of this simulator was that it ensured that no additional constraint was being imposed on the growth equations, and that initial conditions were identical. We then simulated growth for a 15- and 30-year period for Austrian permanent research plots in Arnoldstein and in Litschau, which represent stands at different age-classes and densities. We also simulated growth of open-grown trees and compared the results to the literature. We found that the general pattern of height:diameter ratios was correctly predicted by all four individual-tree growth models, with height:diameter ratios above that of open-grown trees and below that of very dense stands. All models showed a decrease of height

  17. 47 CFR 73.614 - Power and antenna height requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    .... No minimum antenna height above average terrain is specified. (b) Maximum power. Applications will...=Height Above Average Terrain measured in meters. The boundaries specified are to be used to determine...

  18. 47 CFR 73.614 - Power and antenna height requirements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    .... No minimum antenna height above average terrain is specified. (b) Maximum power. Applications will...=Height Above Average Terrain measured in meters. The boundaries specified are to be used to determine...

  19. 47 CFR 73.614 - Power and antenna height requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    .... No minimum antenna height above average terrain is specified. (b) Maximum power. Applications will...=Height Above Average Terrain measured in meters. The boundaries specified are to be used to determine...

  20. Groundwater Level Status Report for 2005 Los Alamos National Laboratory

    SciTech Connect

    S.P. Allen; R.J. Koch

    2006-05-15

    The status of groundwater level monitoring at Los Alamos National Laboratory (LANL) in 2005 is provided in this report. The Groundwater Level Monitoring Project was instituted in 2005 to provide a framework for the collection and processing of quality controlled groundwater level data. This report summarizes groundwater level data for 137 monitoring wells, including 41 regional aquifer wells, 22 intermediate wells, and 74 alluvial wells. Pressure transducers were installed in 118 monitoring wells for continuous monitoring of groundwater levels. Time-series hydrographs of groundwater level data are presented along with pertinent construction and location information for each well.

  1. Decommissioning of surplus facilities at Los Alamos National Laboratory

    SciTech Connect

    Stout, D.S.

    1995-03-01

    Decommissioning Buildings 3 and 4 South at Technical Area 21, Los Alamos National Laboratory, involves the decontamination, dismantlement, and demolition of two enriched-uranium processing buildings containing process equipment and ductwork holdup. The Laboratory has adopted two successful management strategies to implement this project: Rather than characterize an entire site, upfront, investigators use the ``observational approach,`` in which they collect only enough data to begin decommissioning activities and then determine appropriate procedures for further characterization as the work progresses. Project leaders augment work packages with task hazard analyses to fully define specific tasks and inform workers of hazards; all daily work activities are governed by specific work procedures and hazard analyses.

  2. End magnets for the NBS-Los Alamos racetrack microtron

    SciTech Connect

    Debenham, P.H.; Lindstrom, E.R.; Mohr, D.L.

    1983-01-01

    Two end magnets have been designed and constructed for the 185 MeV NBS-Los Alamos racetrack microtron. The field has been measured in the first magnet and is uniform over a 0.62 m/sup 2/ area to within +-2 x 10/sup -4/ at 1 T. The magnet meets all performance specifications. Field measurements are underway on the second magnet. In this paper, design and construction details which play an important role in magnetic performance are described, and the measured fields are compared with calculations.

  3. Mac configuration management at the Los Alamos National Laboratory

    SciTech Connect

    Marcus, Allan B

    2010-01-01

    The Los Alamos National Laboratory (LANL) had a need for central configuration management of non-Windows computers. LANL has three to five thousand Macs and an equal number of Linux based systems. The primary goal was to be able to inventory all non-windows systems and patch Mc OS X systems. LANL examined a number of commercial and open source solutions and ultimately selected Puppet. This paper will discuss why we chose Puppet, how we implemented it, and some lessons we learned along the way.

  4. Theoretical atomic physics code development at Los Alamos

    SciTech Connect

    Clark, R.E.H.; Abdallah, J. Jr.

    1989-01-01

    We have developed a set of computer codes for atomic physics calculations at Los Alamos. These codes can calculate a large variety of data with a minimum of effort on the part of the user. In particular, differential cross sections and electron impact coherence parameters can be readily obtained for arbitrary ions or atoms. Currently, the theory consists of non-relativistic Hartree-Fock structure calculations and non relativistic distorted wave approximation or first order many body theory collisional calculations. 12 refs., 2 figs., 5 tabs.

  5. Groundwater level status report for 2010, Los Alamos National Laboratory

    SciTech Connect

    Koch, Richard J.; Schmeer, Sarah

    2011-03-01

    The status of groundwater level monitoring at Los Alamos National Laboratory in 2010 is provided in this report. This report summarizes groundwater level data for 194 monitoring wells, including 63 regional aquifer wells (including 10 regional/intermediate wells), 34 intermediate wells, 97 alluvial wells, and 12 water supply wells. Pressure transducers were installed in 162 monitoring wells for continuous monitoring of groundwater levels. Time-series hydrographs of groundwater level data are presented along with pertinent construction and location information for each well. The report also summarizes the groundwater temperatures recorded in intermediate and regional aquifer monitoring wells and seasonal responses to snowmelt runoff observed in intermediate wells.

  6. The Los Alamos National Laboratory Nuclear Vision Project

    SciTech Connect

    Arthur, E.D.; Wagner, R.L. Jr.

    1996-09-01

    Los Alamos National Laboratory has initiated a project to examine possible futures associated with the global nuclear enterprise over the course of the next 50 years. All major components are included in this study--weapons, nonproliferation, nuclear power, nuclear materials, and institutional and public factors. To examine key issues, the project has been organized around three main activity areas--workshops, research and analyses, and development of linkages with other synergistic world efforts. This paper describes the effort--its current and planned activities--as well as provides discussion of project perspectives on nuclear weapons, nonproliferation, nuclear energy, and nuclear materials focus areas.

  7. Los Alamos safeguards program overview and NDA in safeguards

    SciTech Connect

    Keepin, G.R.

    1988-01-01

    Over the years the Los Alamos safeguards program has developed, tested, and implemented a broad range of passive and active nondestructive analysis (NDA) instruments (based on gamma and x-ray detection and neutron counting) that are now widely employed in safeguarding nuclear materials of all forms. Here very briefly, the major categories of gamma ray and neutron based NDA techniques, give some representative examples of NDA instruments currently in use, and cite a few notable instances of state-of-the-art NDA technique development. Historical aspects and a broad overview of the safeguards program are also presented.

  8. Tiger Team Assessment of the Los Alamos National Laboratory

    SciTech Connect

    Not Available

    1991-11-01

    The purpose of the safety and health assessment was to determine the effectiveness of representative safety and health programs at the Los Alamos National Laboratory (LANL). Within the safety and health programs at LANL, performance was assessed in the following technical areas: Organization and Administration, Quality Verification, Operations, Maintenance, Training and Certification, Auxiliary Systems, Emergency Preparedness, Technical Support, Packaging and Transportation, Nuclear Criticality Safety, Security/Safety Interface, Experimental Activities, Site/Facility Safety Review, Radiological Protection, Personnel Protection, Worker Safety and Health (OSHA) Compliance, Fire Protection, Aviation Safety, Explosives Safety, Natural Phenomena, and Medical Services.

  9. Los Alamos Science, Number 25 -- 1997: Celebrating the neutrino

    SciTech Connect

    Cooper, N.G.

    1997-12-31

    This issue is devoted to the neutrino and its remaining mysteries. It is divided into the following areas: (1) The Reines-Cowan experiment -- detecting the poltergeist; (2) The oscillating neutrino -- an introduction to neutrino masses and mixing; (3) A brief history of neutrino experiments at LAMPF; (4) A thousand eyes -- the story of LSND (Los Alamos neutrino oscillation experiment); (5) The evidence for oscillations; (6) The nature of neutrinos in muon decay and physics beyond the Standard Model; (7) Exorcising ghosts -- in pursuit of the missing solar neutrinos; (8) MSW -- a possible solution to the solar neutrino problem; (8) Neutrinos and supernovae; and (9) Dark matter and massive neutrinos.

  10. Recent developments in the Los Alamos radiation transport code system

    SciTech Connect

    Forster, R.A.; Parsons, K.

    1997-06-01

    A brief progress report on updates to the Los Alamos Radiation Transport Code System (LARTCS) for solving criticality and fixed-source problems is provided. LARTCS integrates the Diffusion Accelerated Neutral Transport (DANT) discrete ordinates codes with the Monte Carlo N-Particle (MCNP) code. The LARCTS code is being developed with a graphical user interface for problem setup and analysis. Progress in the DANT system for criticality applications include a two-dimensional module which can be linked to a mesh-generation code and a faster iteration scheme. Updates to MCNP Version 4A allow statistical checks of calculated Monte Carlo results.

  11. Upgrade of the Los Alamos Plutonium Facility control system

    SciTech Connect

    Pope, N.G.; Turner, W.J.; Brown, R.E.; Bibeau, R.A.; Davis, R.R.; Hogan, K.

    1996-05-01

    After 20 yrs service, the Los Alamos Plutonium Facility is undergoing an upgrade to its aging Facility Control System. The new system design includes a network of redundantly-paired programmable logic controllers that will interface with about 2200 field data points. The data communications network that has been designed includes a redundant, self-healing fiber optic data highway as well as a fiber optic ethernet. Commercially available human-machine interface software running on a UNIX-based system displays facility subsystem status operator X-terminals. Project design features, methods, costs, and schedule are discussed.

  12. Groundwater level status report for 2008, Los Alamos National Laboratory

    SciTech Connect

    Koch, Richard J.; Schmeer, Sarah

    2009-03-01

    The status of groundwater level monitoring at Los Alamos National Laboratory in 2008 is provided in this report. This report summarizes groundwater level data for 179 monitoring wells, including 45 regional aquifer wells, 28 intermediate wells, 8 regional/intermediate wells, 106 alluvial wells, and 12 water supply wells. Pressure transducers were installed in 166 monitoring wells for continuous monitoring of groundwater levels. Time-series hydrographs of groundwater level data are presented along with pertinent construction and location information for each well. The report also summarizes the groundwater temperatures recorded in intermediate and regional aquifer monitoring wells.

  13. Groundwater level status report for 2009, Los Alamos National Laboratory

    SciTech Connect

    Koch, Richard J.; Schmeer, Sarah

    2010-03-01

    The status of groundwater level monitoring at Los Alamos National Laboratory in 2009 is provided in this report. This report summarizes groundwater level data for 179 monitoring wells, including 55 regional aquifer wells (including 11 regional/intermediate wells), 26 intermediate wells, 98 alluvial wells, and 12 water supply wells. Pressure transducers were installed in 161 monitoring wells for continuous monitoring of groundwater levels. Time-series hydrographs of groundwater level data are presented along with pertinent construction and location information for each well. The report also summarizes the groundwater temperatures recorded in intermediate and regional aquifer monitoring wells.

  14. Water supply at Los Alamos during 1985: Progress report

    SciTech Connect

    Purtymun, W.D.; Becker, N.M.; Maes, M.N.

    1986-10-01

    Well field operations during 1985 were satisfactory with municipal and industrial supplies consisting of 1587 x 10/sup 6/ gal from wells in three well fields and 37 x 10/sup 6/ gal from the gallery in Water Canyon. About 2.8 x 10/sup 6/ gal of water from Guaje Reservoir and 0.9 x 10/sup 6/ gal from Los Alamos Reservoir were used for irrigation; thus the total water usage in 1985 was about 1628 x 10/sup 6/ gal. Primary and secondary chemical quality of water in the distribution system is in compliance with federal regulations.

  15. 15 Years of Wave Height Data Assimilation

    NASA Astrophysics Data System (ADS)

    Janssen, P.

    2006-07-01

    Over the past fiffteen years there has been a continuous interplay between ocean wave forecasting and altimeter data resulting in improvemen ts in both. The prospect of global observations of wind and waves gave a significan t stimulus to wave model development, while the need to have reliab le wav e predictions stimu lated the d evelopment of altimeter wind and wave products. This p aper covers the following: - Altimeter W ave Height D ata Assimilation of altimeter wave height data is of vital importance for the quality of the wave analysis and ocean wave forecasting. In addition, these data are a great h elp in diagnosing wave model problems. Furthermore th ey have great value in ob taining a g lobal wave climato logy. -Altimeter W ind Sp eed D ata Wind speed data are important for mon itor ing the quality of modelled surface w ind. Recen tly, the 'classical' W itter and Ch elton (1991) retriev al algorithm for wind speed (σ0 = ƒ(U10))has been extended by includ ing sea state eff ects and has been in troduced for Jason. On the other hand, th e classical scheme was improved by Abdalla (2006) and introduced for ENVISAT. Th e Abdalla algorithm is shown to perform better, however . Altimeter w indspeed data h ave the potential to be of great value in hurricane conditions as w ell. -Tsunamis An altimeter can ind eed observe tsunami even ts, but there is doubt th at this may be of value for an early warning system.

  16. 50 CFR 648.50 - Shell-height standard.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Shell-height standard. 648.50 Section 648... Atlantic Sea Scallop Fishery § 648.50 Shell-height standard. (a) Minimum shell height. The minimum shell height for in-shell scallops that may be landed, or possessed at or after landing, is 3.5 inches (8.9...

  17. Culture-Independent Diagnostics for Health Security.

    PubMed

    Doggett, Norman A; Mukundan, Harshini; Lefkowitz, Elliot J; Slezak, Tom R; Chain, Patrick S; Morse, Stephen; Anderson, Kevin; Hodge, David R; Pillai, Segaran

    2016-01-01

    The past decade has seen considerable development in the diagnostic application of nonculture methods, including nucleic acid amplification-based methods and mass spectrometry, for the diagnosis of infectious diseases. The implications of these new culture-independent diagnostic tests (CIDTs) include bypassing the need to culture organisms, thus potentially affecting public health surveillance systems, which continue to use isolates as the basis of their surveillance programs and to assess phenotypic resistance to antimicrobial agents. CIDTs may also affect the way public health practitioners detect and respond to a bioterrorism event. In response to a request from the Department of Homeland Security, Los Alamos National Laboratory and the Centers for Disease Control and Prevention cosponsored a workshop to review the impact of CIDTs on the rapid detection and identification of biothreat agents. Four panel discussions were held that covered nucleic acid amplification-based diagnostics, mass spectrometry, antibody-based diagnostics, and next-generation sequencing. Exploiting the extensive expertise available at this workshop, we identified the key features, benefits, and limitations of the various CIDT methods for providing rapid pathogen identification that are critical to the response and mitigation of a bioterrorism event. After the workshop we conducted a thorough review of the literature, investigating the current state of these 4 culture-independent diagnostic methods. This article combines information from the literature review and the insights obtained at the workshop.

  18. Culture-Independent Diagnostics for Health Security.

    PubMed

    Doggett, Norman A; Mukundan, Harshini; Lefkowitz, Elliot J; Slezak, Tom R; Chain, Patrick S; Morse, Stephen; Anderson, Kevin; Hodge, David R; Pillai, Segaran

    2016-01-01

    The past decade has seen considerable development in the diagnostic application of nonculture methods, including nucleic acid amplification-based methods and mass spectrometry, for the diagnosis of infectious diseases. The implications of these new culture-independent diagnostic tests (CIDTs) include bypassing the need to culture organisms, thus potentially affecting public health surveillance systems, which continue to use isolates as the basis of their surveillance programs and to assess phenotypic resistance to antimicrobial agents. CIDTs may also affect the way public health practitioners detect and respond to a bioterrorism event. In response to a request from the Department of Homeland Security, Los Alamos National Laboratory and the Centers for Disease Control and Prevention cosponsored a workshop to review the impact of CIDTs on the rapid detection and identification of biothreat agents. Four panel discussions were held that covered nucleic acid amplification-based diagnostics, mass spectrometry, antibody-based diagnostics, and next-generation sequencing. Exploiting the extensive expertise available at this workshop, we identified the key features, benefits, and limitations of the various CIDT methods for providing rapid pathogen identification that are critical to the response and mitigation of a bioterrorism event. After the workshop we conducted a thorough review of the literature, investigating the current state of these 4 culture-independent diagnostic methods. This article combines information from the literature review and the insights obtained at the workshop. PMID:27314653

  19. Model-independent particle accelerator tuning

    SciTech Connect

    Scheinker, Alexander; Pang, Xiaoying; Rybarcyk, Larry

    2013-10-21

    We present a new model-independent dynamic feedback technique, rotation rate tuning, for automatically and simultaneously tuning coupled components of uncertain, complex systems. The main advantages of the method are: 1) It has the ability to handle unknown, time-varying systems, 2) It gives known bounds on parameter update rates, 3) We give an analytic proof of its convergence and its stability, and 4) It has a simple digital implementation through a control system such as the Experimental Physics and Industrial Control System (EPICS). Because this technique is model independent it may be useful as a real-time, in-hardware, feedback-based optimization scheme for uncertain and time-varying systems. In particular, it is robust enough to handle uncertainty due to coupling, thermal cycling, misalignments, and manufacturing imperfections. As a result, it may be used as a fine-tuning supplement for existing accelerator tuning/control schemes. We present multi-particle simulation results demonstrating the scheme’s ability to simultaneously adaptively adjust the set points of twenty two quadrupole magnets and two RF buncher cavities in the Los Alamos Neutron Science Center Linear Accelerator’s transport region, while the beam properties and RF phase shift are continuously varying. The tuning is based only on beam current readings, without knowledge of particle dynamics. We also present an outline of how to implement this general scheme in software for optimization, and in hardware for feedback-based control/tuning, for a wide range of systems.

  20. Is height a core geometric cue for navigation? Young children's use of height in reorientation.

    PubMed

    Hu, Qingfen; Zhang, Jing; Wu, Di; Shao, Yi

    2015-02-01

    With respect to reorientation, children older than 1.5 to 2 years can use geometric cues (distance and left/right sense). However, because previous studies have focused mainly on the plane geometric properties, little is known about the role of information with respect to vertical dimension in children's reorientation. The current study aimed to examine whether and how 3- and 4-year-old children use height information to search for a hidden toy when disoriented in a small enclosure. In a slant-ceiling rectangular room and a slant-ceiling square room, 4-year-olds were able to use height information to reorient and search for the toy in the correct corner, whereas 3-year-olds were not able to do so. Our results suggest that children can, at least by the age of 4 years, use height information and that height is not used as early as other geometric properties that are in the core geometry system for navigation.

  1. Is height a core geometric cue for navigation? Young children's use of height in reorientation.

    PubMed

    Hu, Qingfen; Zhang, Jing; Wu, Di; Shao, Yi

    2015-02-01

    With respect to reorientation, children older than 1.5 to 2 years can use geometric cues (distance and left/right sense). However, because previous studies have focused mainly on the plane geometric properties, little is known about the role of information with respect to vertical dimension in children's reorientation. The current study aimed to examine whether and how 3- and 4-year-old children use height information to search for a hidden toy when disoriented in a small enclosure. In a slant-ceiling rectangular room and a slant-ceiling square room, 4-year-olds were able to use height information to reorient and search for the toy in the correct corner, whereas 3-year-olds were not able to do so. Our results suggest that children can, at least by the age of 4 years, use height information and that height is not used as early as other geometric properties that are in the core geometry system for navigation. PMID:25462036

  2. Estimation and Attribution of the Temperature Variances in Height Range 60~140 km

    NASA Astrophysics Data System (ADS)

    Chen, Zeyu

    The SABER/TIMED temperatures collected during 2002 2006 are used to estimate for height range 60 120 km the variances of temperature (Temp-VARs) that are contributed from nonstationary perturbations. The estimation results disclose that the height range 60 140 km can be separated into two regions that are characterized by significant differences of the attributions of the Temp-VARs. In the region below 100 km height, the Temp-VARs generally increase with height, the corresponding standard deviations of temperature (Temp-SDEVs) ranges from 4 K at 60 km and 18 K at 100 km. The regions exhibiting intense Temp-VARs appear at the equator and the extra-tropics of both hemispheres. Moreover, these non-stationary temperature disturbances can be accounted primarily by the tidal variances that are derived independently by using the same data-set, in particular by the migrating diurnal, semidiurnal, and terdiurnal tide. It is also found that the region above 100 km is characterized by surprisingly large Temp-VARs with the corresponding Temp-SDEVs greater than 30 K. In a height-latitude cross-section, a stagnant maximum of Temp-SDEVs embraced by the 30-K contour remains over the course of a year at the Equator in a narrow height range 110 125 km. At the same height in Southern hemisphere, the same kind maxima appears at latitudes from the extra-tropics to polar region except during the June solstice. In contrast, the maxima appearing in Northern hemisphere high latitudes exhibits intra-seasonal variations, there such maximum are seen during the course of a year. Further investigation results confirm that the large Temp-VARs have no relevance to the tidal variances, implying the control from other processes, e.g., non-stationary planetary waves. The details will be introduced in the presentation.

  3. Does condylar height decrease more in temporomandibular joint nonreducing disc displacement than reducing disc displacement?

    PubMed Central

    Hu, Ying-Kai; Yang, Chi; Cai, Xie-Yi; Xie, Qian-Yang

    2016-01-01

    Abstract The aim of the study was to compare condylar height changes of anterior disc displacement with reduction (ADDwR) and anterior disc displacement without reduction (ADDwoR) in temporomandibular joint (TMJ) quantitatively, to get a better understanding of the changes in condylar height of patients with anterior disc displacement who had received no treatment, and to provide useful information for treatment protocol. This longitudinal retrospective study enrolled 206 joints in 156 patients, which were divided into ADDWR group and ADDwoR group based on magnetic resonance imaging examination. The joints were assessed quantitatively for condylar height at initial and follow-up visits. Also, both groups were further divided into 3 subgroups according to age: <15 years group, 15 to 21 years group, and 22 to 35 years group. Paired t test and independent t test were used to assess intra- and intergroup differences. The average age of the ADDwR group was 19.65 years with a mean of 9.47 months’ follow-up. The follow-up interval of the patients with ADDwoR was 7.96 months, with a mean age of 18.51 years. Condylar height in ADDwoR tended to decrease more than those in ADDwR, especially during the pubertal growth spurt and with the presence of osteoarthrosis, meaning ADDwoR could cause a severe disturbance in mandibular development. Thus, an early disc repositioning was suggested to avoid decrease in condylar height. PMID:27583909

  4. 47 CFR 80.763 - Effective antenna height.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 5 2013-10-01 2013-10-01 false Effective antenna height. 80.763 Section 80.763... MARITIME SERVICES Standards for Computing Public Coast Station VHF Coverage § 80.763 Effective antenna height. The effective height of the antenna is the vertical distance between the center of the...

  5. 47 CFR 73.211 - Power and antenna height requirements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 4 2014-10-01 2014-10-01 false Power and antenna height requirements. 73.211... RADIO BROADCAST SERVICES FM Broadcast Stations § 73.211 Power and antenna height requirements. (a... Class C and C0 stations is 100 kW. (2) Class C0 stations must have an antenna height above...

  6. 47 CFR 24.232 - Power and antenna height limits.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 2 2014-10-01 2014-10-01 false Power and antenna height limits. 24.232 Section... PERSONAL COMMUNICATIONS SERVICES Broadband PCS § 24.232 Power and antenna height limits. (a)(1) Base... radiated power (EIRP) with an antenna height up to 300 meters HAAT, except as described in paragraph...

  7. 47 CFR 24.232 - Power and antenna height limits.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Power and antenna height limits. 24.232 Section... PERSONAL COMMUNICATIONS SERVICES Broadband PCS § 24.232 Power and antenna height limits. (a)(1) Base... radiated power (EIRP) with an antenna height up to 300 meters HAAT, except as described in paragraph...

  8. 47 CFR 73.614 - Power and antenna height requirements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 4 2013-10-01 2013-10-01 false Power and antenna height requirements. 73.614... RADIO BROADCAST SERVICES Television Broadcast Stations § 73.614 Power and antenna height requirements.... No minimum antenna height above average terrain is specified. (b) Maximum power. Applications...

  9. 47 CFR 80.763 - Effective antenna height.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 5 2014-10-01 2014-10-01 false Effective antenna height. 80.763 Section 80.763... MARITIME SERVICES Standards for Computing Public Coast Station VHF Coverage § 80.763 Effective antenna height. The effective height of the antenna is the vertical distance between the center of the...

  10. 47 CFR 80.763 - Effective antenna height.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 5 2012-10-01 2012-10-01 false Effective antenna height. 80.763 Section 80.763... MARITIME SERVICES Standards for Computing Public Coast Station VHF Coverage § 80.763 Effective antenna height. The effective height of the antenna is the vertical distance between the center of the...

  11. 47 CFR 24.132 - Power and antenna height limits.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 2 2011-10-01 2011-10-01 false Power and antenna height limits. 24.132 Section... PERSONAL COMMUNICATIONS SERVICES Narrowband PCS § 24.132 Power and antenna height limits. (a) Stations... unlimited in antenna height except as provided in paragraph (d) of this section. (d)(1) MTA and...

  12. 47 CFR 24.132 - Power and antenna height limits.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Power and antenna height limits. 24.132 Section... PERSONAL COMMUNICATIONS SERVICES Narrowband PCS § 24.132 Power and antenna height limits. (a) Stations... unlimited in antenna height except as provided in paragraph (d) of this section. (d)(1) MTA and...

  13. 47 CFR 24.132 - Power and antenna height limits.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 2 2013-10-01 2013-10-01 false Power and antenna height limits. 24.132 Section... PERSONAL COMMUNICATIONS SERVICES Narrowband PCS § 24.132 Power and antenna height limits. (a) Stations... unlimited in antenna height except as provided in paragraph (d) of this section. (d)(1) MTA and...

  14. 47 CFR 24.232 - Power and antenna height limits.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 2 2011-10-01 2011-10-01 false Power and antenna height limits. 24.232 Section... PERSONAL COMMUNICATIONS SERVICES Broadband PCS § 24.232 Power and antenna height limits. (a)(1) Base... radiated power (EIRP) with an antenna height up to 300 meters HAAT, except as described in paragraph...

  15. 47 CFR 101.125 - Temporary fixed antenna height restrictions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 5 2012-10-01 2012-10-01 false Temporary fixed antenna height restrictions... SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.125 Temporary fixed antenna height restrictions. The overall antenna structure heights employed by mobile stations in the...

  16. 47 CFR 101.125 - Temporary fixed antenna height restrictions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 5 2011-10-01 2011-10-01 false Temporary fixed antenna height restrictions... SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.125 Temporary fixed antenna height restrictions. The overall antenna structure heights employed by mobile stations in the...

  17. 47 CFR 24.232 - Power and antenna height limits.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 2 2012-10-01 2012-10-01 false Power and antenna height limits. 24.232 Section... PERSONAL COMMUNICATIONS SERVICES Broadband PCS § 24.232 Power and antenna height limits. (a)(1) Base... radiated power (EIRP) with an antenna height up to 300 meters HAAT, except as described in paragraph...

  18. 47 CFR 24.132 - Power and antenna height limits.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 2 2014-10-01 2014-10-01 false Power and antenna height limits. 24.132 Section... PERSONAL COMMUNICATIONS SERVICES Narrowband PCS § 24.132 Power and antenna height limits. (a) Stations... unlimited in antenna height except as provided in paragraph (d) of this section. (d)(1) MTA and...

  19. 47 CFR 80.763 - Effective antenna height.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Effective antenna height. 80.763 Section 80.763... MARITIME SERVICES Standards for Computing Public Coast Station VHF Coverage § 80.763 Effective antenna height. The effective height of the antenna is the vertical distance between the center of the...

  20. 47 CFR 73.211 - Power and antenna height requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Power and antenna height requirements. 73.211... RADIO BROADCAST SERVICES FM Broadcast Stations § 73.211 Power and antenna height requirements. (a... Class C and C0 stations is 100 kW. (2) Class C0 stations must have an antenna height above...

  1. 47 CFR 101.125 - Temporary fixed antenna height restrictions.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 5 2013-10-01 2013-10-01 false Temporary fixed antenna height restrictions... SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.125 Temporary fixed antenna height restrictions. The overall antenna structure heights employed by mobile stations in the...

  2. 47 CFR 101.125 - Temporary fixed antenna height restrictions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Temporary fixed antenna height restrictions... SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.125 Temporary fixed antenna height restrictions. The overall antenna structure heights employed by mobile stations in the...

  3. 47 CFR 24.232 - Power and antenna height limits.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 2 2013-10-01 2013-10-01 false Power and antenna height limits. 24.232 Section... PERSONAL COMMUNICATIONS SERVICES Broadband PCS § 24.232 Power and antenna height limits. (a)(1) Base... radiated power (EIRP) with an antenna height up to 300 meters HAAT, except as described in paragraph...

  4. 47 CFR 24.132 - Power and antenna height limits.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 2 2012-10-01 2012-10-01 false Power and antenna height limits. 24.132 Section... PERSONAL COMMUNICATIONS SERVICES Narrowband PCS § 24.132 Power and antenna height limits. (a) Stations... unlimited in antenna height except as provided in paragraph (d) of this section. (d)(1) MTA and...

  5. 47 CFR 73.211 - Power and antenna height requirements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 4 2013-10-01 2013-10-01 false Power and antenna height requirements. 73.211... RADIO BROADCAST SERVICES FM Broadcast Stations § 73.211 Power and antenna height requirements. (a... Class C and C0 stations is 100 kW. (2) Class C0 stations must have an antenna height above...

  6. 47 CFR 80.763 - Effective antenna height.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 5 2011-10-01 2011-10-01 false Effective antenna height. 80.763 Section 80.763... MARITIME SERVICES Standards for Computing Public Coast Station VHF Coverage § 80.763 Effective antenna height. The effective height of the antenna is the vertical distance between the center of the...

  7. 47 CFR 101.125 - Temporary fixed antenna height restrictions.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 5 2014-10-01 2014-10-01 false Temporary fixed antenna height restrictions... SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.125 Temporary fixed antenna height restrictions. The overall antenna structure heights employed by mobile stations in the...

  8. 47 CFR 73.614 - Power and antenna height requirements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 4 2014-10-01 2014-10-01 false Power and antenna height requirements. 73.614... RADIO BROADCAST SERVICES Television Broadcast Stations § 73.614 Power and antenna height requirements.... No minimum antenna height above average terrain is specified. (b) Maximum power. Applications...

  9. 14 CFR 29.1517 - Limiting height-speed envelope.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Limiting height-speed envelope. 29.1517... Operating Limitations § 29.1517 Limiting height-speed envelope. For Category A rotorcraft, if a range of heights exists at any speed, including zero, within which it is not possible to make a safe...

  10. 14 CFR 27.87 - Height-speed envelope.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Height-speed envelope. 27.87 Section 27.87... STANDARDS: NORMAL CATEGORY ROTORCRAFT Flight Performance § 27.87 Height-speed envelope. (a) If there is any combination of height and forward speed (including hover) under which a safe landing cannot be made under...

  11. 14 CFR 27.87 - Height-speed envelope.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Height-speed envelope. 27.87 Section 27.87... STANDARDS: NORMAL CATEGORY ROTORCRAFT Flight Performance § 27.87 Height-speed envelope. (a) If there is any combination of height and forward speed (including hover) under which a safe landing cannot be made under...

  12. 14 CFR 29.1517 - Limiting height-speed envelope.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Limiting height-speed envelope. 29.1517... Operating Limitations § 29.1517 Limiting height-speed envelope. For Category A rotorcraft, if a range of heights exists at any speed, including zero, within which it is not possible to make a safe...

  13. 14 CFR 29.1517 - Limiting height-speed envelope.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Limiting height-speed envelope. 29.1517... Operating Limitations § 29.1517 Limiting height-speed envelope. For Category A rotorcraft, if a range of heights exists at any speed, including zero, within which it is not possible to make a safe...

  14. 14 CFR 29.1517 - Limiting height-speed envelope.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Limiting height-speed envelope. 29.1517... Operating Limitations § 29.1517 Limiting height-speed envelope. For Category A rotorcraft, if a range of heights exists at any speed, including zero, within which it is not possible to make a safe...

  15. 14 CFR 27.87 - Height-speed envelope.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Height-speed envelope. 27.87 Section 27.87... STANDARDS: NORMAL CATEGORY ROTORCRAFT Flight Performance § 27.87 Height-speed envelope. (a) If there is any combination of height and forward speed (including hover) under which a safe landing cannot be made under...

  16. 14 CFR 29.1517 - Limiting height-speed envelope.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Limiting height-speed envelope. 29.1517... Operating Limitations § 29.1517 Limiting height-speed envelope. For Category A rotorcraft, if a range of heights exists at any speed, including zero, within which it is not possible to make a safe...

  17. 14 CFR 27.87 - Height-speed envelope.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Height-speed envelope. 27.87 Section 27.87... STANDARDS: NORMAL CATEGORY ROTORCRAFT Flight Performance § 27.87 Height-speed envelope. (a) If there is any combination of height and forward speed (including hover) under which a safe landing cannot be made under...

  18. 14 CFR 27.87 - Height-speed envelope.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Height-speed envelope. 27.87 Section 27.87... STANDARDS: NORMAL CATEGORY ROTORCRAFT Flight Performance § 27.87 Height-speed envelope. (a) If there is any combination of height and forward speed (including hover) under which a safe landing cannot be made under...

  19. The Perceptual Distortion of Height in Intercollegiate Debate.

    ERIC Educational Resources Information Center

    Hensley, Wayne E.; Angoli, Marilyn

    Both balance and reinforcement theories were used in an examination of the perceptual distortion of height among 146 college debaters. Balance theory predicted that losers would distort winners' heights upward; reinforcement theory predicted that winners would distort losers' heights upward. The results confirmed both predictions. The possibility…

  20. Don't Look down: Emotional Arousal Elevates Height Perception

    ERIC Educational Resources Information Center

    Stefanucci, Jeanine K.; Storbeck, Justin

    2009-01-01

    In a series of experiments, it was found that emotional arousal can influence height perception. In Experiment 1, participants viewed either arousing or nonarousing images before estimating the height of a 2-story balcony and the size of a target on the ground below the balcony. People who viewed arousing images overestimated height and target…

  1. 14 CFR 29.87 - Height-velocity envelope.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Height-velocity envelope. 29.87 Section 29... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Flight Performance § 29.87 Height-velocity envelope. (a) If there is any combination of height and forward velocity (including hover) under which a...

  2. 14 CFR 29.87 - Height-velocity envelope.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Height-velocity envelope. 29.87 Section 29... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Flight Performance § 29.87 Height-velocity envelope. (a) If there is any combination of height and forward velocity (including hover) under which a...

  3. 14 CFR 29.87 - Height-velocity envelope.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Height-velocity envelope. 29.87 Section 29... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Flight Performance § 29.87 Height-velocity envelope. (a) If there is any combination of height and forward velocity (including hover) under which a...

  4. 14 CFR 29.87 - Height-velocity envelope.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Height-velocity envelope. 29.87 Section 29... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Flight Performance § 29.87 Height-velocity envelope. (a) If there is any combination of height and forward velocity (including hover) under which a...

  5. 14 CFR 29.87 - Height-velocity envelope.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Height-velocity envelope. 29.87 Section 29... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Flight Performance § 29.87 Height-velocity envelope. (a) If there is any combination of height and forward velocity (including hover) under which a...

  6. 36 CFR 910.61 - Height of development.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 36 Parks, Forests, and Public Property 3 2013-07-01 2012-07-01 true Height of development. 910.61 Section 910.61 Parks, Forests, and Public Property PENNSYLVANIA AVENUE DEVELOPMENT CORPORATION GENERAL... DEVELOPMENT AREA Glossary of Terms § 910.61 Height of development. Height of development means the...

  7. 36 CFR 910.61 - Height of development.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Height of development. 910.61 Section 910.61 Parks, Forests, and Public Property PENNSYLVANIA AVENUE DEVELOPMENT CORPORATION GENERAL... DEVELOPMENT AREA Glossary of Terms § 910.61 Height of development. Height of development means the...

  8. 36 CFR 910.61 - Height of development.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 36 Parks, Forests, and Public Property 3 2014-07-01 2014-07-01 false Height of development. 910.61 Section 910.61 Parks, Forests, and Public Property PENNSYLVANIA AVENUE DEVELOPMENT CORPORATION GENERAL... DEVELOPMENT AREA Glossary of Terms § 910.61 Height of development. Height of development means the...

  9. 36 CFR 910.61 - Height of development.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Height of development. 910.61 Section 910.61 Parks, Forests, and Public Property PENNSYLVANIA AVENUE DEVELOPMENT CORPORATION GENERAL... DEVELOPMENT AREA Glossary of Terms § 910.61 Height of development. Height of development means the...

  10. 36 CFR 910.61 - Height of development.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 36 Parks, Forests, and Public Property 3 2012-07-01 2012-07-01 false Height of development. 910.61 Section 910.61 Parks, Forests, and Public Property PENNSYLVANIA AVENUE DEVELOPMENT CORPORATION GENERAL... DEVELOPMENT AREA Glossary of Terms § 910.61 Height of development. Height of development means the...

  11. The Los Alamos suite of relativistic atomic physics codes

    SciTech Connect

    Fontes, C. J.; Zhang, H. L.; Jr, J. Abdallah; Clark, R. E. H.; Kilcrease, D. P.; Colgan, J.; Cunningham, R. T.; Hakel, P.; Magee, N. H.; Sherrill, M. E.

    2015-05-28

    The Los Alamos SuitE of Relativistic (LASER) atomic physics codes is a robust, mature platform that has been used to model highly charged ions in a variety of ways. The suite includes capabilities for calculating data related to fundamental atomic structure, as well as the processes of photoexcitation, electron-impact excitation and ionization, photoionization and autoionization within a consistent framework. These data can be of a basic nature, such as cross sections and collision strengths, which are useful in making predictions that can be compared with experiments to test fundamental theories of highly charged ions, such as quantum electrodynamics. The suite can also be used to generate detailed models of energy levels and rate coefficients, and to apply them in the collisional-radiative modeling of plasmas over a wide range of conditions. Such modeling is useful, for example, in the interpretation of spectra generated by a variety of plasmas. In this work, we provide a brief overview of the capabilities within the Los Alamos relativistic suite along with some examples of its application to the modeling of highly charged ions.

  12. Industrial application for the Los Alamos Materials Modeling Platform

    SciTech Connect

    Lesar, R.; Charbon, C.; Kothe, D.; Wu, D.; Reddy, A.

    1996-09-01

    This is the final report of a one-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). Casting and solidification of molten metals and metal alloys is a critical step in the production of high-quality metal stock and in the fabrication of finished parts. Control of the casting process can be the determining factor in both the quality and cost of the final metal product. Major problems with the quality of cast stock or finished parts can arise because of the difficulty of preventing variations in the alloy content, the generation of porosity or poor surface finish, and the loss of microstructure controlled strength and toughness resulting from the poor understanding and design of the mold filling and solidification processes. In this project, we sought to develop a new set of applications focused on adding the ability to accurately model solidification and grain growth to casting simulations. We implemented these applications within the Los Alamos Materials Modeling Platform, LAMMP, a graphical-based materials, and materials modeling environment being created at the Computational Testbed for Industry.

  13. The Los Alamos suite of relativistic atomic physics codes

    DOE PAGES

    Fontes, C. J.; Zhang, H. L.; Jr, J. Abdallah; Clark, R. E. H.; Kilcrease, D. P.; Colgan, J.; Cunningham, R. T.; Hakel, P.; Magee, N. H.; Sherrill, M. E.

    2015-05-28

    The Los Alamos SuitE of Relativistic (LASER) atomic physics codes is a robust, mature platform that has been used to model highly charged ions in a variety of ways. The suite includes capabilities for calculating data related to fundamental atomic structure, as well as the processes of photoexcitation, electron-impact excitation and ionization, photoionization and autoionization within a consistent framework. These data can be of a basic nature, such as cross sections and collision strengths, which are useful in making predictions that can be compared with experiments to test fundamental theories of highly charged ions, such as quantum electrodynamics. The suitemore » can also be used to generate detailed models of energy levels and rate coefficients, and to apply them in the collisional-radiative modeling of plasmas over a wide range of conditions. Such modeling is useful, for example, in the interpretation of spectra generated by a variety of plasmas. In this work, we provide a brief overview of the capabilities within the Los Alamos relativistic suite along with some examples of its application to the modeling of highly charged ions.« less

  14. The Los Alamos universe: Using multimedia to promote laboratory capabilities

    SciTech Connect

    Kindel, J.

    2000-03-01

    This project consists of a multimedia presentation that explains the technological capabilities of Los Alamos National Laboratory. It takes the form of a human-computer interface built around the metaphor of the universe. The project is intended promote Laboratory capabilities to a wide audience. Multimedia is simply a means of communicating information through a diverse set of tools--be they text, sound, animation, video, etc. Likewise, Los Alamos National Laboratory is a collection of diverse technologies, projects, and people. Given the ample material available at the Laboratory, there are tangible benefits to be gained by communicating across media. This paper consists of three parts. The first section provides some basic information about the Laboratory, its mission, and its needs. The second section introduces this multimedia presentation and the metaphor it is based on along with some basic concepts of color and user interaction used in the building of this project. The final section covers construction of the project, pitfalls, and future improvements.

  15. Solar pond research at the Los Alamos National Laboratory

    SciTech Connect

    Jones, G.F.; Meyer, K.A.; Hedstrom, J.C.; Grimmer, D.P.

    1984-01-01

    A description of solar pond research at Los Alamos National Laboratory is presented. The main issues in the theory of solar ponds are discussed. Among these are the interfacial-boundary-layer model, models for interface motion and pond performance, heat extraction, and ground heat loss. The core of the research effort at Los Alamos was the development of a one-dimensional computer program to accurately predict dynamic performance of a solar pond. The computer model and the experiments that were designed and performed to validate it are described. The experiments include two laboratory tanks wherein temperature, salinity, and flow visualization data were obtained and a 232 m/sup 2/ outdoor solar pond. Results from preliminary validation show good agreement between the pond's predicted dynamic behavior and that which actually occurred in the experiments. More validation using data from full-sized solar ponds is needed. A new correlation for the ratio of interfacial salt-flux to heat-flux is proposed which agrees well with our data. Recommendations for future research are given.

  16. Los Alamos Center for Computer Security formal computer security model

    SciTech Connect

    Dreicer, J.S.; Hunteman, W.J.; Markin, J.T.

    1989-01-01

    This paper provides a brief presentation of the formal computer security model currently being developed at the Los Alamos Department of Energy (DOE) Center for Computer Security (CCS). The need to test and verify DOE computer security policy implementation first motivated this effort. The actual analytical model was a result of the integration of current research in computer security and previous modeling and research experiences. The model is being developed to define a generic view of the computer and network security domains, to provide a theoretical basis for the design of a security model, and to address the limitations of present formal mathematical models for computer security. The fundamental objective of computer security is to prevent the unauthorized and unaccountable access to a system. The inherent vulnerabilities of computer systems result in various threats from unauthorized access. The foundation of the Los Alamos DOE CCS model is a series of functionally dependent probability equations, relations, and expressions. The model is undergoing continued discrimination and evolution. We expect to apply the model to the discipline of the Bell and LaPadula abstract sets of objects and subjects. 6 refs.

  17. Fuels Inventories in the Los Alamos National Laboratory Region: 1997

    SciTech Connect

    Balice, R.G.; Oswald, B.P.; Martin, C.

    1999-03-01

    Fifty-four sites were surveyed for fuel levels, vegetational structures, and topographic characteristics. Most of the surveyed sites were on Los Alamos National Laboratory property, however, some surveys were also conducted on U.S. Forest Service property. The overall vegetation of these sites ranged from pinon-juniper woodlands to ponderosa pine forests to mixed conifer forests, and the topographic positions included canyons, mesas, and mountains. The results of these surveys indicate that the understory fuels are the greatest in mixed conifer forests and that overstory fuels are greatest in both mixed conifer forests and ponderosa pine forests on mesas. The geographic distribution of these fuels would suggest a most credible wildfire scenario for the Los Alamos region. Three major fires have occurred since 1954 and these fires behaved in a manner that is consistent with this scenario. The most credible wildfire scenario was also supported by the results of BEHAVE modeling that used the fuels inventory data as inputs. Output from the BEHAVE model suggested that catastrophic wildfires would continue to occur during any season with sufficiently dry, windy weather.

  18. Cleanup at Los Alamos National Laboratory - the challenges - 9493

    SciTech Connect

    Stiger, Susan G; Hargis, Kenneth M; Graham, Michael J; Rael, George J

    2008-01-01

    This paper provides an overview of environmental cleanup at the Los Alamos National Laboratory (LANL) and some of the unique aspects and challenges. Cleanup of the 65-year old Department of Energy Laboratory is being conducted under a RCRA Consent Order with the State of New Mexico. This agreement is one of the most recent cleanup agreements signed in the DOE complex and was based on lessons learned at other DOE sites. A number of attributes create unique challenges for LANL cleanup -- the proximity to the community and pueblos, the site's topography and geology, and the nature of LANL's on-going missions. This overview paper will set the stage for other papers in this session, including papers that present: Plans to retrieve buried waste at Material Disposal Area B, across the street from oen of Los Alamos' commercial districts and the local newspaper; Progress to date and joint plans with WIPP for disposal of the remaining inventory of legacy transuranic waste; Reviews of both groundwater and surface water contamination and the factors complicating both characterization and remediation; Optimizing the disposal of low-level radioactive waste from ongoing LANL missions; A stakeholder environmental data transparency project (RACER), with full public access to all available information on contamination at LANL, and A description of the approach to waste processing cost recovery from the programs that generate hazardous and radioactive waste at LANL.

  19. An organizational survey of the Los Alamos Site

    SciTech Connect

    Shurberg, D.A.; Haber, S.B.

    1991-11-01

    An Organizational Survey (OS) was administered at the Los Alamos Site that queried employees on the subjects of organizational culture, various aspects of communications, employee commitment, work group cohesion, coordination of work, environmental, safety, and health concern, hazardous nature of work, safety and overall job satisfaction. The purpose of the OS is to measure in a quantitative and objective way the notion of ``culture;`` that is, the values, attitudes, and beliefs of the individuals working within the organization. In addition, through the OS, a broad sample of individuals can be reached that would probably not be interviewed or observed during the course of a typical assessment. The OS also provides a descriptive profile of the organization at one point in time that can then be compared to a profile taken at a different point in time to assess changes in the culture of the organization. While comparisons among groups are made, it is not the purpose of this report to make evaluative statements of which profile may be positive or negative. However, using the data presented in this report in conjunction with other evaluative activities, may provide useful insight into the organization. The OS administration at the Los Alamos Site was the ninth to occur at a Department of Energy (DOE) facility. All data from the OS is presented in group summaries, by organization, department or directorate within organization, supervisory level both overall and within organization, and staff classification within organization. Statistically significant differences between groups are identified and discussed. 9 refs., 94 figs., 11 tabs.

  20. An organizational survey of the Los Alamos Site

    SciTech Connect

    Shurberg, D.A.; Haber, S.B.

    1991-11-01

    An Organizational Survey (OS) was administered at the Los Alamos Site that queried employees on the subjects of organizational culture, various aspects of communications, employee commitment, work group cohesion, coordination of work, environmental, safety, and health concern, hazardous nature of work, safety and overall job satisfaction. The purpose of the OS is to measure in a quantitative and objective way the notion of culture;'' that is, the values, attitudes, and beliefs of the individuals working within the organization. In addition, through the OS, a broad sample of individuals can be reached that would probably not be interviewed or observed during the course of a typical assessment. The OS also provides a descriptive profile of the organization at one point in time that can then be compared to a profile taken at a different point in time to assess changes in the culture of the organization. While comparisons among groups are made, it is not the purpose of this report to make evaluative statements of which profile may be positive or negative. However, using the data presented in this report in conjunction with other evaluative activities, may provide useful insight into the organization. The OS administration at the Los Alamos Site was the ninth to occur at a Department of Energy (DOE) facility. All data from the OS is presented in group summaries, by organization, department or directorate within organization, supervisory level both overall and within organization, and staff classification within organization. Statistically significant differences between groups are identified and discussed. 9 refs., 94 figs., 11 tabs.

  1. Exploding metallic foil fuse modeling at Los Alamos

    SciTech Connect

    Lindemuth, I.R.; Reinovsky, R.E.; Goforth, J.H.

    1989-01-01

    A ''first-principles'' computational model of exploding metallic foil behavior has been developed at Los Alamos. The model couples zero-dimensional magnetohydrodynamics with ohmic heating and electrical circuit equations and uses the Los Alamos SESAME atomic data base computer library to determine the foil material's temperature- and density-dependent pressure, specific energy, and electrical conductivity. The model encompasses many previously successful empirical models and offers plausible physical explanations of phenomena not treated by the empirical models. In addition to addressing the electrical circuit performance of an exploding foil, the model provides information on the temporal evolution of the foil material's density, temperature, pressure, electrical conductivity, and expansion and translational velocities. In this paper, we report the physical insight gained by computational studies of two opening switch concepts being developed for application in an FCG-driven 1-MJ-class imploding plasma z-pinch experiment. The first concept considered is a ''conventional'' electrically exploded fuse, which has been demonstrated to operate at 16 MA driven by the 15-MJ-class FCG to be used in the 1 MJ implosion experiment. The second concept considered is a Type 2 explosively formed fuse (EFF), which has been demonstrated to operate at the 8 MA level by a 1-MJ-class FCG.

  2. Exploding metallic foil fuse modeling at Los Alamos

    NASA Astrophysics Data System (ADS)

    Lindemuth, Irvin R.; Reinovsky, Robert E.; Goforth, James H.

    A first-principles computational model of exploding metallic foil behavior was developed at Los Alamos. The model couples zero-dimensional magnetohydrodynamics with ohmic heating and electrical circuit equations and uses the Los Alamos SESAME atomic data base computer library to determine the foil material's temperature- and density-dependent pressure, specific energy, and electrical conductivity. The model encompasses many previously successful empirical models and offers plausible physical explanations of phenomena not treated by the empirical models. In addition to addressing the electrical circuit performance of an exploding foil, the model provides information on the temporal evolution of the foil material's density, temperature, pressure, electrical conductivity, and expansion and translational velocities. The physical insight gained by computational studies of two opening switch concepts being developed for application in an FCG-driven 1-MJ-class imploding plasma z-pinch experiment are reported. The first concept considered is a conventional electrically exploded fuse, which was demonstrated to operate at 16 MA driven by the 15-MJ-class FCG to be used in the 1 MJ implosion experiment. The second concept considered is a Type 2 explosively formed fuse (EFF), which was demonstrated to operate at the 8 MA level by a 1-MJ-class FCG.

  3. Water supply at Los Alamos during 1987: Progress report

    SciTech Connect

    Purtymun, W.D.; Stoker, A.K.; Maes, M.N.

    1989-01-01

    Municipal and industrial water supply during 1987 was 1594 /times/ 10W gal from wells in three fields and 34 /times/ 10W gal from the spring gallery in Water Canyon. About 2.8 /times/ 10W gal of nonpotable water from the Guaje Reservoir and 3.2 /times/ 10W gal from the Los Alamos Reservoir were used for irrigation; thus, the total water usage in 1987 was about 1634 /times/ 10W gal. Water supply was satisfactory in that the production met demand and water quality in the distribution system was in compliance with state and federal regulations. However, in 1987 two wells were lost because of deterioration of the casing and screen. In spite of rehabilitation attempts to maintain the yield, production from the older wells continued to decline. A comprehensive evaluation of the wells and well fields made in late 1987 concluded that replacement wells and new wells were needed soon to ensure a reliable water supply for the Laboratory and the county of Los Alamos. 25 refs., 6 figs., 7 tabs.

  4. Seismic vulnerability study Los Alamos Meson Physics Facility (LAMPF)

    SciTech Connect

    Salmon, M.; Goen, L.K.

    1995-12-01

    The Los Alamos Meson Physics Facility (LAMPF), located at TA-53 of Los Alamos National Laboratory (LANL), features an 800 MeV proton accelerator used for nuclear physics and materials science research. As part of the implementation of DOE Order 5480.25 and in preparation for DOE Order 5480.28, a seismic vulnerability study of the structures, systems, and components (SSCs) supporting the beam line from the accelerator building through to the ends of die various beam stops at LAMPF has been performed. The study was accomplished using the SQUG GIP methodology to assess the capability of the various SSCs to resist an evaluation basis earthquake. The evaluation basis earthquake was selected from site specific seismic hazard studies. The goals for the study were as follows: (1) identify SSCs which are vulnerable to seismic loads; and (2) ensure that those SSCs screened during die evaluation met the performance goals required for DOE Order 5480.28. The first goal was obtained by applying the SQUG GIP methodology to those SSCS represented in the experience data base. For those SSCs not represented in the data base, information was gathered and a significant amount of engineering judgment applied to determine whether to screen the SSC or to classify it as an outlier. To assure the performance goals required by DOE Order 5480.28 are met, modifications to the SQUG GIP methodology proposed by Salmon and Kennedy were used. The results of this study ire presented in this paper.

  5. Performance programming with the Los Alamos macro accelerator

    NASA Astrophysics Data System (ADS)

    Cort, G.

    The CCC macro facility, as extended by Version 2.0 of Softool's Change and Configuration Control Environment, offers many new and powerful features. Among these are a vastly extended suite of commands, error trapping, and structured constructs. In concert with previously existing Version 1.x features (notably the very powerful symbol substitution and parameter passage facilities), these features combine to transform the macro facility from a simple command language into an extremely flexible programming language which is suitable for developing very large and complex applications. This paper presents the results of a performance analysis of the CCC macro facility conducted at the Los Alamos National Laboratory Weapons Neutron Research Facility. The goal of this work was to identify and evaluate major factors that can contribute to the degradation of performance of the CCC macro facility, and to develop strategies for countering their effects. In particular, we report on the Los Alamos Macro Accelerator, which can produce dramatic increases in execution speed for many applications.

  6. Investigation of excess thyroid cancer incidence in Los Alamos County

    SciTech Connect

    Athas, W.F.

    1996-04-01

    Los Alamos County (LAC) is home to the Los Alamos National Laboratory, a U.S. Department of Energy (DOE) nuclear research and design facility. In 1991, the DOE funded the New Mexico Department of Health to conduct a review of cancer incidence rates in LAC in response to citizen concerns over what was perceived as a large excess of brain tumors and a possible relationship to radiological contaminants from the Laboratory. The study found no unusual or alarming pattern in the incidence of brain cancer, however, a fourfold excess of thyroid cancer was observed during the late-1980`s. A rapid review of the medical records for cases diagnosed between 1986 and 1990 failed to demonstrate that the thyroid cancer excess had resulted from enhanced detection. Surveillance activities subsequently undertaken to monitor the trend revealed that the excess persisted into 1993. A feasibility assessment of further studies was made, and ultimately, an investigation was conducted to document the epidemiologic characteristics of the excess in detail and to explore possible causes through a case-series records review. Findings from the investigation are the subject of this report.

  7. Mixed low-level waste minimization at Los Alamos

    SciTech Connect

    Starke, T.P.

    1998-12-01

    During the first six months of University of California 98 Fiscal Year (July--December) Los Alamos National Laboratory has achieved a 57% reduction in mixed low-level waste generation. This has been accomplished through a systems approach that identified and minimized the largest MLLW streams. These included surface-contaminated lead, lead-lined gloveboxes, printed circuit boards, and activated fluorescent lamps. Specific waste minimization projects have been initiated to address these streams. In addition, several chemical processing equipment upgrades are being implemented. Use of contaminated lead is planned for several high energy proton beam stop applications and stainless steel encapsulated lead is being evaluated for other radiological control area applications. INEEL is assisting Los Alamos with a complete systems analysis of analytical chemistry derived mixed wastes at the CMR building and with a minimum life-cycle cost standard glovebox design. Funding for waste minimization upgrades has come from several sources: generator programs, waste management, the generator set-aside program, and Defense Programs funding to INEEL.

  8. Modeling loblolly pine dominant height using airborne LiDAR

    NASA Astrophysics Data System (ADS)

    Maceyka, Andy

    The dominant height of 73 georeferenced field sample plots were modeled from various canopy height metrics derived by means of a small-footprint laser scanning technology, known as light detection and ranging (or just LiDAR), over young and mature forest stands using regression analysis. LiDAR plot metrics were regressed against field measured dominant height using Best Subsets Regression to reduce the number of models. From those models, regression assumptions were evaluated to determine which model was actually the best. The best model included the 1st and 90th height percentiles as predictors and explained 95% of the variance in average dominant height.

  9. Can Fundal Height Predict Birth Weight or Twins?

    PubMed Central

    Reynolds, J. L.; Kettner, A.; Burnett, M.; Cheang, M.

    1986-01-01

    To determine how well symphysis fundal height measurements correlated with birth weight, the authors retrospectively reviewed 100 records of pregnancy from a family practice. The sensitivity and specificity of symphysis fundal height in identifying small and large for gestational age babies were determined. While symphysis fundal height measurements correlated well with birth weight, the sensitivity was too low and the number of false positives too high, for symphysis fundal height measurement alone to be clinically useful. On reviewing all twin pregnancies in the same setting, the authors found that symphysis fundal height measurements facilitated early diagnosis of twin gestation. PMID:21274242

  10. School Finance in a Federal City: Los Alamos as a Case Study.

    ERIC Educational Resources Information Center

    Smith, Duane W.

    The Los Alamos schools obtain support from a combination of local, state, and Department of Energy funds mandated by the Atomic Energy Commission Community Act. Each year the Los Alamos schools prepare three budgets, and during any week the schools may work directly with all three levels of government concerning funding. In 1974 the state of New…

  11. Recollections of a very junior physicist at Los Alamos, 1944-1946

    NASA Astrophysics Data System (ADS)

    French, Anthony P.

    2008-04-01

    The author came to Los Alamos as a member of the British Mission after two years of making fission cross section measurements at the Cavendish Laboratory. He worked in a group headed by Egon Bretscher in Enrico Fermi's F Division. The talk presents his personal memories and experiences at Los Alamos as compared to his life and work in wartime Britain.

  12. Sinai Peninsula, Shaded Relief and Colored Height

    NASA Technical Reports Server (NTRS)

    2004-01-01

    The Sinai Peninsula, located between Africa and Asia, is a result of those two continents pulling apart from each other. Earth's crust is cracking, stretching, and lowering along the two northern branches of the Red Sea, namely the Gulf of Suez, seen here on the west (left), and the Gulf of Aqaba, seen to the east (right). This color-coded shaded relief image shows the triangular nature of the peninsula, with the coast of the Mediterranean Sea forming the northern side of the triangle. The Suez Canal can be seen as the narrow vertical blue line in the upper left connecting the Red Sea to the Mediterranean.

    The peninsula is divided into three distinct parts; the northern region consisting chiefly of sandstone, plains and hills, the central area dominated by the Tih Plateau, and the mountainous southern region where towering peaks abound. Much of the Sinai is deeply dissected by river valleys, or wadis, that eroded during an earlier geologic period and break the surface of the plateau into a series of detached massifs with a few scattered oases.

    Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.

    Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot

  13. Ireland, Shaded Relief and Colored Height

    NASA Technical Reports Server (NTRS)

    2005-01-01

    The island of Ireland comprises a large central lowland of limestone with a relief of hills surrounded by a discontinuous border of coastal mountains which vary greatly in geological structure. The mountain ridges of the south are composed of old red sandstone separated by limestone river valleys. Granite predominates in the mountains of Galway, Mayo and Donegal in the west and north-west and in Counties Down and Wicklow on the east coast, while a basalt plateau covers much of the north-east of the country. The central plain, which is broken in places by low hills, is extensively covered with glacial deposits of clay and sand. It has considerable areas of bog and numerous lakes. The island has seen at least two general glaciations and everywhere ice-smoothed rock, mountain lakes, glacial valleys and deposits of glacial sand, gravel and clay mark the passage of the ice.

    Two visualization methods were combined to produce this image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.

    Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Geospatial

  14. Bali, Shaded Relief and Colored Height

    NASA Technical Reports Server (NTRS)

    2004-01-01

    The volcanic nature of the island of Bali is evident in this shaded relief image generated with data from the Shuttle Radar Topography Mission (SRTM).

    Bali, along with several smaller islands, make up one of the 27 Provinces of Indonesia. It lies over a major subduction zone where the Indo-Australian tectonic plate collides with the Sunda plate, creating one of the most volcanically active regions on the planet.

    The most significant feature on Bali is Gunung Agung, the symmetric, conical mountain at the right-center of the image. This 'stratovolcano,' 3,148 meters (10,308 feet) high, is held sacred in Balinese culture, and last erupted in 1963 after being dormant and thought inactive for 120 years. This violent event resulted in over 1,000 deaths, and coincided with a purification ceremony called Eka Dasa Rudra, meant to restore the balance between nature and man. This most important Balinese rite is held only once per century, and the almost exact correspondence between the beginning of the ceremony and the eruption is though to have great religious significance.

    Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.

    Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter

  15. World Globes, Shaded Relief and Colored Height

    NASA Technical Reports Server (NTRS)

    2003-01-01

    These images of the world were generated with data from the Shuttle Radar Topography Mission (SRTM). The SRTM Project has recently released a new global data set called SRTM30, where the original one arcsecond of latitude and longitude resolution (about 30 meters, or 98 feet, at the equator) was reduced to 30 arcseconds (about 928 meters, or 1496 feet.) These images were created from that data set and show the Earth as it would be viewed from a point in space centered over the Americas, Africa and the western Pacific.

    Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.

    Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise,Washington, D.C.

    Orientation: North toward the top Image Data: shaded and colored SRTM elevation model Original Data Resolution: SRTM 1 arcsecond (about 30

  16. Optimal Inflatable Space Towers of High Height

    NASA Astrophysics Data System (ADS)

    Bolonkin, Alexander

    2002-01-01

    Author provides theory and computations for building inflatable space towers up to a hundred km in height. These towers can be used for tourism; scientific observation of space, earth's surface, weather, top atmosphere, as well as for radio, television, and communication transmissions. These towers can also be used to launch space ships and Earth satellites. These projects are not expensive and do not require rockets. They require thin strong films composed from artificial fibers and fabricated by current industry. Towers can be built using present technology. Towers can be used (for tourism, communication, etc.) during the construction process and provide self-financing for further construction. The tower design does not require work at high altitudes; all construction can be done at the earth's surface. The transport system for this tower consists a small engine (used only for friction compensation) located at the earth's surface. The tower is separated into sections and has special protection mechanism in case of a damage. Problems involving security, control, repair, and stability of the proposed towers are addressed in subsequent publications. The author is prepared to discuss these and other problems with serious organizations desiring to research and develop these projects.

  17. Height Fluctuations for the Stationary KPZ Equation

    NASA Astrophysics Data System (ADS)

    Borodin, Alexei; Corwin, Ivan; Ferrari, Patrik; Vető, Bálint

    2015-12-01

    We compute the one-point probability distribution for the stationary KPZ equation (i.e. initial data , for B( X) a two-sided standard Brownian motion) and show that as time T goes to infinity, the fluctuations of the height function grow like T 1/3 and converge to those previously encountered in the study of the stationary totally asymmetric simple exclusion process, polynuclear growth model and last passage percolation. The starting point for this work is our derivation of a Fredholm determinant formula for Macdonald processes which degenerates to a corresponding formula for Whittaker processes. We relate this to a polymer model which mixes the semi-discrete and log-gamma random polymers. A special case of this model has a limit to the KPZ equation with initial data given by a two-sided Brownian motion with drift ß to the left of the origin and b to the right of the origin. The Fredholm determinant has a limit for ß > b, and the case where ß = b (corresponding to the stationary initial data) follows from an analytic continuation argument.

  18. Seasat altimeter height calibration. [related to sea surface heights near bermuda

    NASA Technical Reports Server (NTRS)

    Kolenkiewicz, R.; Martin, C. F.

    1981-01-01

    The Seasat altimeter was calibrated for height bias using four overflight passes of Bermuda which were supported by the Bermuda laser. The altimeter data was corrected for: tides, using recorded tide gauge data; propagation effects, using meteorological data taken around the time of each pass; acceleration lag; and sea state bias, including both surface effects and instrumental effects. Altimeter data for each of the four passes was smoothed and extrapolated across the island. Interpolation between passes then produced an equivalent altimeter measurement to the geoid at the laser site, so that the altimeter bias could be estimated without the use of a geoid model. The estimated height bias was 0.0 + or - 0.07.

  19. Fostering Musical Independence

    ERIC Educational Resources Information Center

    Shieh, Eric; Allsup, Randall Everett

    2016-01-01

    Musical independence has always been an essential aim of musical instruction. But this objective can refer to everything from high levels of musical expertise to more student choice in the classroom. While most conceptualizations of musical independence emphasize the demonstration of knowledge and skills within particular music traditions, this…

  20. Independent vs. Laboratory Papers.

    ERIC Educational Resources Information Center

    Wilson, Clint C., II

    1981-01-01

    Comparisons of independent and laboratory newspapers at selected California colleges indicated that (1) the independent newspapers were superior in editorial opinion and leadership characteristics; (2) the laboratory newspapers made better use of photography, art, and graphics; and (3) professional journalists highly rated their laboratory…

  1. Independence of Internal Auditors.

    ERIC Educational Resources Information Center

    Montondon, Lucille; Meixner, Wilda F.

    1993-01-01

    A survey of 288 college and university auditors investigated patterns in their appointment, reporting, and supervisory practices as indicators of independence and objectivity. Results indicate a weakness in the positioning of internal auditing within institutions, possibly compromising auditor independence. Because the auditing function is…

  2. American Independence. Fifth Grade.

    ERIC Educational Resources Information Center

    Crosby, Annette

    This fifth grade teaching unit covers early conflicts between the American colonies and Britain, battles of the American Revolutionary War, and the Declaration of Independence. Knowledge goals address the pre-revolutionary acts enforced by the British, the concepts of conflict and independence, and the major events and significant people from the…

  3. Preliminary results from the Los Alamos TA54 complex terrain Atmospheric Transport Study (ATS)

    SciTech Connect

    Vold, E.; Chan, M.; Sanders, L.

    1995-09-01

    The Los Alamos National Laboratory (LANL) Low-Level Radioactive Waste (LLRW) disposal site at TA54, Area G la located on a mesa top amidst a complex terrain of finger like mesas typically 30 motors or more In height above canyons of widths varying from 100 to 300 motors. Atmospheric dispersion from this site is of concern for routine operations and for potential Incidents during waste retrieval operations. Indian lands are located In the dominant downwind direction within 500 m from the site and provide further incentive to understand the potential and actual impacts of waste disposal operations. The permanent network of meteorological towers at LANL have been located primarily at mesa-top locations to coincide with most laboratory facilities and as such do not resolve the effects of channeling in the canyons and the influence this has on potential surface releases. An Atmospheric Transport Study (ATS) was initiated to better understand the wind flow fields and dispersion from the LANL Waste Storage and Disposal facilities at TA-54, Area G. As part of this effort, a series of six portable meteorological towers were sited in the vicinity of Area G, two at mesa top locations, one just east of the site where the mesas have dissipated to mild ridges, and three in the canyons adjacent to the disposal site mesa as indicated on the topographic representation of the local terrain. Since 1994, the towers have collected horizontal wind velocities, pressure, temperature, relative humidity and a radiation gamma reading every fifteen minutes. The data bass is being analyzed for trends and to provide a basis for comparison to computational modeling efforts to predict the flow fields.

  4. Evaluating Reanalysis - Independent Observations and Observation Independence

    NASA Astrophysics Data System (ADS)

    Wahl, S.; Bollmeyer, C.; Danek, C.; Friederichs, P.; Keller, J. D.; Ohlwein, C.

    2014-12-01

    Reanalyses on global to regional scales are widely used for validation of meteorological or hydrological models and for many climate applications. However, the evaluation of the reanalyses itself is still a crucial task. A major challenge is the lack of independent observations, since most of the available observational data is already included, e. g. by the data assimilation scheme. Here, we focus on the evaluation of dynamical reanalyses which are obtained by using numerical weather prediction models with a fixed data assimilation scheme. Precipitation is generally not assimilated in dynamical reanalyses (except for e.g. latent heat nudging) and thereby provides valuable data for the evaluation of reanalysis. Since precipitation results from the complex dynamical and microphysical atmospheric processes, an accurate representation of precipitation is often used as an indicator for a good model performance. Here, we use independent observations of daily precipitation accumulations from European rain gauges (E-OBS) of the years 2008 and 2009 for the intercomparison of various regional reanalyses products for the European CORDEX domain (Hirlam reanalysis at 0.2°, Metoffice UM reanalysis at 0.11°, COSMO reanalysis at 0.055°). This allows for assessing the benefits of increased horizontal resolution compared to global reanalyses. Furthermore, the effect of latent heat nudging (assimilation of radar-derived rain rates) is investigated using an experimental setup of the COSMO reanalysis with 6km and 2km resolution for summer 2011. Further, we present an observation independent evaluation based on kinetic energy spectra. Such spectra should follow a k-3 dependence of the wave number k for the larger scale, and a k-5/3 dependence on the mesoscale. We compare the spectra of the aforementioned regional reanalyses in order to investigate the general capability of the reanalyses to resolve events on the mesoscale (e.g. effective resolution). The intercomparison and

  5. Independent technical review of the Mound Plant

    SciTech Connect

    Not Available

    1994-06-01

    This report documents an Independent Technical Review (ITR) of the facilities, organizations, plans, and activities required to transition particular elements of the Mound Plant from Defense Program (DP) funded operation as appropriate either to community developed reuse or safe deactivation leading to decontamination and decommissioning (D&D). The review was conducted at the request of the Dr. Willis Bixby, Deputy Assistant Secretary, U.S. Department of Energy EM-60, Office of Facility Transition and Management and is a consensus of the nine member ITR Team. Information for the review was drawn from documents provided to the ITR Team by the Miamisburg Area Office (MB) of the DOE, EG&G, the City of Miamisburg, and others; and from presentations, discussions, interviews, and facility inspections at the Mound Plant during the weeks of March 14 and March 28, 1994. During the week of April 25, 1994, the ITR Team met at Los Alamos, New Mexico to develop consensus recommendations. A presentation of the core recommendations was made at the Mound Plant on May 5, 1994. This is an independent assessment of information available to, and used by, the Mound Plant personnel. Repetition of the information is not meant to imply discovery by the ITR Team. Team members, however, acting as independent reviewers, frequently assess the information from a perspective that differs significantly from that of the Mound Plant personnel. The report is based on information obtained and conditions observed during the March 1994 review interval. The ITR process and normal site work often initiate rapid, beneficial changes in understanding and organization immediately following the review. These changes frequently alter conditions observed during the review, but the report does not address changes subsequent to the review interval.

  6. Advances in and uses of gamma-ray field instrumentation at Los Alamos

    SciTech Connect

    Halbig, J.K.; Klosterbuer, S.F.; Russo, P.A.; Sprinkle, J.K. Jr.; Smith, S.E.; Ianakiev, K.

    1994-02-01

    We are developing a set of tools to be used by the Safeguards Assay Group to solve problems found in safeguards and the domestic nuclear industry. The tools are also applicable to problems dealing with the environment, defense, and other areas of national and international interest. We have used extensively the advances in hardware and software since our last multichannel analyzer (MCA) development activities over a decade ago. We are also using our experience with and feedback from users of our previous instruments. In analyzing the instrument needs of our constituents and the characteristics of our previous instruments, which we think have inhibited their broader use, we have concluded that uses for an MCA-type instrument are widely varied and fundamentally changing,and that any new instruments should include a versatile, widely used hardware interface, which is as independent as possible of hardware standards, and which is readily interfaced to the computers or controllers rapidly evolving in the commercial sector. In addition, software tools must be provided that allow Los Alamos, users, and third parties to quickly and conveniently develop software specific to the user or the measurement to control the basic instrument we develop. This paper deals mainly with a miniature and modular multi-channel analyzer (M{sup 3}CA) and its applications.

  7. Los Alamos National Laboratory`s Mobile Real Time Radiography System

    SciTech Connect

    Vigil, J.; Taggart, D.; Betts, S.; Mendez, J.; Rael, C.; Martinez, F.

    1997-01-01

    A 450-KeV Mobile Real Time Radiography (RTR) System was delivered to Los Alamos National Laboratory (LANL) in January 1996. It was purchased to inspect containers of radioactive waste produced at (LANL). Since its delivery it has been used to radiograph greater than 600 drums of radioactive waste at various LANL sites. It has the capability of inspecting waste containers of various sizes. It has three independent X-Ray acquisition formats. The primary system used is a 12 in. image intensifier, the second is a 36 in. linear diode array (LDA) and the last is an open system. It is fully self contained with on board generator, HVAC and a fire suppression system. It is on a 53 ft long X 8 ft. wide X 14 ft. high trailer that can be moved over any highway requiring only a easily obtainable overweight permit because it weighs approximately 38 tons. It was built to conform to industry standards for a cabinet system which does not require an exclusion zone. The fact that this unit is mobile has allowed us to operate where the waste is stored, rather than having to move the waste to a fixed facility.

  8. France, Shaded Relief and Colored Height

    NASA Technical Reports Server (NTRS)

    2003-01-01

    This image of France was generated with data from the Shuttle Radar Topography Mission (SRTM). For this broad view the resolution of the data was reduced to 6 arcseconds (about 185 meters north-south and 127 meters east-west), resampled to a Mercator projection, and the French border outlined. Even at this decreased resolution the variety of landforms comprising the country is readily apparent.

    The upper central part of this scene is dominated by the Paris Basin, which consists of a layered sequence of sedimentary rocks. Fertile soils over much of the area make good agricultural land. The Normandie coast to the upper left is characterized by high, chalk cliffs, while the Brittany coast (the peninsula to the left) is highly indented where deep valleys were drowned by the sea, and the Biscay coast to the southwest is marked by flat, sandy beaches.

    To the south, the Pyrenees form a natural border between France and Spain, and the south-central part of the country is dominated by the ancient Massif Central. Subject to volcanism that has only subsided in the last 10,000 years, these central mountains are separated from the Alps by the north-south trending Rhone River Basin.

    Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.

    Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to

  9. Olduvai Gorge, Shaded Relief and Colored Height

    NASA Technical Reports Server (NTRS)

    2004-01-01

    color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.

    Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Geospatial-Intelligence Agency (NGA) of the U.S. Department of Defense and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise, Washington, D.C.

    Location: 3 degrees south latitude, 35 degrees east longitude Orientation: North toward the top, Mercator projection Size: 223 by 223 kilometers (138 by 138 miles) Image Data: shaded and colored SRTM elevation model Date Acquired: February 2000

  10. South America, Shaded Relief and Colored Height

    NASA Technical Reports Server (NTRS)

    2003-01-01

    that indicate the occurrence of simple erosional processes acting upon fairly uniform bedrock. Very smooth plateaus here are remnants of landforms most likely developed under geologic and environmental conditions much different than those present today. Fractures paralleling the coast are likely related to the opening of the Atlantic Ocean as South America drifted away from Africa, starting about 130 million years ago.

    To the southwest, broad lowlands host the Gran Chaco and Pampas regions. The depositional Gran Chaco drainages run almost exclusively from west to east from the Andes Mountains to the western edge of the Brazilian Highlands as a result of the much greater sediment supply from the Andes. Geologic processes on the Pampas are much more diverse, with stream erosion, stream deposition, subsidence, and wind processes all evident, even at the one-kilometer resolution shown here.

    Further south, Patagonia also displays these geologic processes plus more prominent volcanic features, including bumpy mesas, which are lava plateaus with small (and some large) volcanic cones. At its southern tip South America breaks into islands that include Tierra del Fuego and the Straits of Magellan.

    Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.

    Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was

  11. Guiana Highlands, Shaded Relief and Colored Height

    NASA Technical Reports Server (NTRS)

    2003-01-01

    inspiration for Arthur Conan Doyle's 1912 best-seller 'The Lost World.'

    Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.

    Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise,Washington, D.C.

    Location: 0.2 South to 8.7 degrees North latitude, 60 to 67.9 degrees West longitude Orientation: North toward the top Image Data: shaded and colored SRTM30 and GTOPO30 elevation models Data Resolution: SRTM 30 arcsecond (about 928 meters or 1496 feet) Date Acquired: February 2000 for SRTM

  12. Australia, Shaded Relief and Colored Height

    NASA Technical Reports Server (NTRS)

    2004-01-01

    : shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.

    Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter (approximately 200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Geospatial-Intelligence Agency (NGA) of the U.S. Department of Defense and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise, Washington, D.C.

    Location: 45 to 10 degrees South latitude, 112 to 155 degrees East longitude Orientation: North toward the top, Mercator projection Image Data: shaded and colored SRTM elevation model Date Acquired: February 2000

  13. Subexponential estimates in Shirshov's theorem on height

    SciTech Connect

    Belov, Aleksei Ya; Kharitonov, Mikhail I

    2012-04-30

    Suppose that F{sub 2,m} is a free 2-generated associative ring with the identity x{sup m}=0. In 1993 Zelmanov put the following question: is it true that the nilpotency degree of F{sub 2,m} has exponential growth? We give the definitive answer to Zelmanov's question by showing that the nilpotency class of an l-generated associative algebra with the identity x{sup d}=0 is smaller than {Psi}(d,d,l), where {Psi}(n,d,l)=2{sup 18}l(nd){sup 3log}{sub 3}{sup (nd)+13}d{sup 2}. This result is a consequence of the following fact based on combinatorics of words. Let l, n and d{>=}n be positive integers. Then all words over an alphabet of cardinality l whose length is not less than {Psi}(n,d,l) are either n-divisible or contain x{sup d}; a word W is n-divisible if it can be represented in the form W=W{sub 0}W{sub 1} Horizontal-Ellipsis W{sub n} so that W{sub 1},...,W{sub n} are placed in lexicographically decreasing order. Our proof uses Dilworth's theorem (according to V.N. Latyshev's idea). We show that the set of not n-divisible words over an alphabet of cardinality l has height h<{Phi}(n,l) over the set of words of degree {<=}n-1, where {Phi}(n,l)=2{sup 87}l{center_dot}n{sup 12log}{sub 3}{sup n+48}. Bibliography: 40 titles.

  14. Light acclimation optimizes leaf functional traits despite height-related constraints in a canopy shading experiment.

    PubMed

    Coble, Adam P; Cavaleri, Molly A

    2015-04-01

    Within-canopy gradients of leaf functional traits have been linked to both light availability and vertical gradients in leaf water potential. While observational studies can reveal patterns in leaf traits, within-canopy experimental manipulations can provide mechanistic insight to tease apart multiple interacting drivers. Our objectives were to disentangle effects of height and light environment on leaf functional traits by experimentally shading branches along vertical gradients within a sugar maple (Acer saccharum) forest. Shading reduced leaf mass per area (LMA), leaf density, area-based leaf nitrogen (N(area)), and carbon:nitrogen (C:N) ratio, and increased mass-based leaf nitrogen (N(mass)), highlighting the importance of light availability on leaf morphology and chemistry. Early in the growing season, midday leaf water potential (Ψ(mid)), LMA, and N(area) were driven primarily by height; later in the growing season, light became the most important driver for LMA and Narea. Carbon isotope composition (δ(13)C) displayed strong, linear correlations with height throughout the growing season, but did not change with shading, implying that height is more influential than light on water use efficiency and stomatal behavior. LMA, leaf density, N(mass), C:N ratio, and δ(13)C all changed seasonally, suggesting that leaf ageing effects on leaf functional traits are equally as important as microclimatic conditions. Overall, our results indicate that: (1) stomatal sensitivity to vapor pressure deficit or Ψ(mid) constrains the supply of CO2 to leaves at higher heights, independent of light environment, and (2) LMA and N(area) distributions become functionally optimized through morphological acclimation to light with increasing leaf age despite height-related constraints.

  15. Topside correction of IRI by global modeling of ionospheric scale height using COSMIC radio occultation data

    NASA Astrophysics Data System (ADS)

    Wu, M. J.; Guo, P.; Fu, N. F.; Xu, T. L.; Xu, X. S.; Jin, H. L.; Hu, X. G.

    2016-06-01

    The ionosphere scale height is one of the most significant ionospheric parameters, which contains information about the ion and electron temperatures and dynamics in upper ionosphere. In this paper, an empirical orthogonal function (EOF) analysis method is applied to process all the ionospheric radio occultations of GPS/COSMIC (Constellation Observing System for Meteorology, Ionosphere, and Climate) from the year 2007 to 2011 to reconstruct a global ionospheric scale height model. This monthly medium model has spatial resolution of 5° in geomagnetic latitude (-87.5° ~ 87.5°) and temporal resolution of 2 h in local time. EOF analysis preserves the characteristics of scale height quite well in the geomagnetic latitudinal, anural, seasonal, and diurnal variations. In comparison with COSMIC measurements of the year of 2012, the reconstructed model indicates a reasonable accuracy. In order to improve the topside model of International Reference Ionosphere (IRI), we attempted to adopt the scale height model in the Bent topside model by applying a scale factor q as an additional constraint. With the factor q functioning in the exponent profile of topside ionosphere, the IRI scale height should be forced equal to the precise COSMIC measurements. In this way, the IRI topside profile can be improved to get closer to the realistic density profiles. Internal quality check of this approach is carried out by comparing COSMIC realistic measurements and IRI with or without correction, respectively. In general, the initial IRI model overestimates the topside electron density to some extent, and with the correction introduced by COSMIC scale height model, the deviation of vertical total electron content (VTEC) between them is reduced. Furthermore, independent validation with Global Ionospheric Maps VTEC implies a reasonable improvement in the IRI VTEC with the topside model correction.

  16. Light acclimation optimizes leaf functional traits despite height-related constraints in a canopy shading experiment.

    PubMed

    Coble, Adam P; Cavaleri, Molly A

    2015-04-01

    Within-canopy gradients of leaf functional traits have been linked to both light availability and vertical gradients in leaf water potential. While observational studies can reveal patterns in leaf traits, within-canopy experimental manipulations can provide mechanistic insight to tease apart multiple interacting drivers. Our objectives were to disentangle effects of height and light environment on leaf functional traits by experimentally shading branches along vertical gradients within a sugar maple (Acer saccharum) forest. Shading reduced leaf mass per area (LMA), leaf density, area-based leaf nitrogen (N(area)), and carbon:nitrogen (C:N) ratio, and increased mass-based leaf nitrogen (N(mass)), highlighting the importance of light availability on leaf morphology and chemistry. Early in the growing season, midday leaf water potential (Ψ(mid)), LMA, and N(area) were driven primarily by height; later in the growing season, light became the most important driver for LMA and Narea. Carbon isotope composition (δ(13)C) displayed strong, linear correlations with height throughout the growing season, but did not change with shading, implying that height is more influential than light on water use efficiency and stomatal behavior. LMA, leaf density, N(mass), C:N ratio, and δ(13)C all changed seasonally, suggesting that leaf ageing effects on leaf functional traits are equally as important as microclimatic conditions. Overall, our results indicate that: (1) stomatal sensitivity to vapor pressure deficit or Ψ(mid) constrains the supply of CO2 to leaves at higher heights, independent of light environment, and (2) LMA and N(area) distributions become functionally optimized through morphological acclimation to light with increasing leaf age despite height-related constraints. PMID:25596955

  17. Los Alamos Plutonium Facility implementation support project report

    SciTech Connect

    Thomas, C.C. Jr.; Ford, W.; Hsue, S.T.; Marshall, R.S.

    1982-05-01

    During FY 1981 the TA-55 Implementation Support Project provided assistance to the Los Alamos Plutonium Facility in materials accounting and control, including testing and evaluation of a solution mass measurement system, development and testing of a low-level plutonium assay system, holdup measurements, instrument design, and advice and consultation following the observation of semiannual inventories. This report describes the program envisioned for FY 1982, including demonstration of the solution mass measurement system and the associated calibration system, extension of the low-level plutonium assay system to solutions with americium/plutonium ratios of 10: to 20:1, and development and demonstration of a method to calibrate and routinely verify the plutonium oxalate assay instrument performance. The FY 1982 program is subject to changes based on TA-55 reevaluation of facility needs.

  18. Operational status of the Los Alamos neutron science center (LANSCE)

    SciTech Connect

    Jones, Kevin W; Erickson, John L; Schoenberg, Kurt F

    2010-01-01

    The Los Alamos Neutron Science Center (LANSCE) accelerator and beam delivery complex generates the proton beams that serve three neutron production sources; the thermal and cold source for the Manuel Lujan Jr. Neutron Scattering Center, the Weapons Neutron Research (WNR) high-energy neutron source, and a pulsed Ultra-Cold Neutron Source. These three sources are the foundation of strong and productive multi-disciplinary research programs that serve a diverse and robust user community. The facility also provides multiplexed beams for the production of medical radioisotopes and proton radiography of dynamic events. The recent operating history of these sources will be reviewed and plans for performance improvement will be discussed, together with the underlying drivers for the proposed LANSCE Refurbishment project. The details of this latter project are presented in a separate contribution.

  19. Los Alamos Explosives Performance Key to Stockpile Stewardship

    SciTech Connect

    Dattelbaum, Dana

    2014-11-03

    As the U.S. Nuclear Deterrent ages, one essential factor in making sure that the weapons will continue to perform as designed is understanding the fundamental properties of the high explosives that are part of a nuclear weapons system. As nuclear weapons go through life extension programs, some changes may be advantageous, particularly through the addition of what are known as "insensitive" high explosives that are much less likely to accidentally detonate than the already very safe "conventional" high explosives that are used in most weapons. At Los Alamos National Laboratory explosives research includes a wide variety of both large- and small-scale experiments that include small contained detonations, gas and powder gun firings, larger outdoor detonations, large-scale hydrodynamic tests, and at the Nevada Nuclear Security Site, underground sub-critical experiments.

  20. Recent progress of the Los Alamos advanced free electron laser

    SciTech Connect

    Nguyen, D.C.; Austin, R.H.; Chan, K.C.D.; Feldman, D.W.; Goldstein, J.C.; Gierman, S.M.; Kinross-Wright, J.M.; Kong, S.H.; Plato, J.G.; Russell, S.J.

    1994-05-01

    Many industrial and research applications can benefit from the availability of a compact, user-friendly, broadly tunable and high average power free electron laser (FEL). Over the past four years, the Los Alamos Advanced FEL has been built with these design goals. The key to a compact FEL is the integration of advanced beam technologies such as a high-brightness photoinjector, a high-gradient compact linac, and permanent magnet beamline components. These technologies enable the authors to shrink the FEL size yet maintain its high average power capability. The Advanced FEL has been in operation in the near ir (4-6 {mu}m) since early 1993. Recent results of the Advanced FEL lasing at saturation and upgrades to improve its average power are presented.

  1. Neutron Capture Experiments Using the DANCE Array at Los Alamos

    NASA Astrophysics Data System (ADS)

    Dashdorj, D.; Mitchell, G. E.; Baramsai, B.; Chyzh, A.; Walker, C.; Agvaanluvsan, U.; Becker, J. A.; Parker, W.; Sleaford, B.; Wu, C. Y.; Bredeweg, T. A.; Couture, A.; Haight, R. C.; Jandel, M.; Rundberg, R. S.; Ullmann, J. L.; Vieira, D. J.; Wouters, J. M.; Krtička, M.; Bečvář, F.

    2009-03-01

    The Detector for Advanced Neutron Capture Experiments (DANCE) is designed for neutron capture measurements on very small and/or radioactive targets. The DANCE array of 160 BaF2 scintillation detectors is located at the Lujan Center at the Los Alamos Neutron Science Center (LANSCE). Accurate measurements of neutron capture data are important for many current applications as well as for basic understanding of neutron capture. The gamma rays following neutron capture reactions have been studied by the time-of-flight technique using the DANCE array. The high granularity of the array allows measurements of the gamma-ray multiplicity. The gamma-ray multiplicities and energy spectra for different multiplicities can be measured and analyzed for spin and parity determination of the resolved resonances.

  2. Tiger Team Assessment of the Los Alamos National Laboratory

    SciTech Connect

    Not Available

    1991-11-01

    The Management Subteam conducted a management and organization assessment of environment, safety, and health (ES H) activities performed by the Los Alamos National Laboratory (LANL) and onsite contractor personnel. The objectives of the assessment were to (1) evaluate the effectiveness of management systems and practices in terms of ensuring environmental compliance and the safety and health of workers and the general public, (2) identify key findings, and (3) identify root causes for all ES H findings and concerns. The scope of the assessment included examinations of the following from an ES H perspective: (1) strategic and program planning; (2) organizational structure and management configuration; (3) human resource management, including training and staffing; (4) management systems, including performance monitoring and assessment; (5) conduct of operations; (6) public and institutional interactions; and (7) corporate'' parent support.

  3. Los Alamos Discovers Super Efficient Solar Using Perovskite Crystals

    SciTech Connect

    Mohite, Aditya; Nie, Wanyi

    2015-01-29

    State-of-the-art photovoltaics using high-purity, large-area, wafer-scale single-crystalline semiconductors grown by sophisticated, high temperature crystal-growth processes offer promising routes for developing low-cost, solar-based clean global energy solutions for the future. Solar cells composed of the recently discovered material organic-inorganic perovskites offer the efficiency of silicon, yet suffer from a variety of deficiencies limiting the commercial viability of perovskite photovoltaic technology. In research to appear in Science, Los Alamos National Laboratory researchers reveal a new solution-based hot-casting technique that eliminates these limitations, one that allows for the growth of high-quality, large-area, millimeter-scale perovskite crystals and demonstrates that highly efficient and reproducible solar cells with reduced trap assisted recombination can be realized.

  4. The legacy and future of CFD at Los Alamos

    SciTech Connect

    Johnson, N.L.

    1996-06-01

    The early history is presented of the prolific development of CFD methods in the Fluid Dynamics Group (T-3) at Los Alamos National Laboratory in the years from 1958 to the late 1960`s. Many of the currently used numerical methods--PIC, MAC, vorticity-stream-function, ICE, ALE methods and the {kappa}-{var_epsilon} method for turbulence--originated during this time. The rest of the paper summarizes the current research in T-3 for CFD, turbulence and solids modeling. The research areas include reactive flows, multimaterial flows, multiphase flows and flows with spatial discontinuities. Also summarized are modern particle methods and techniques developed for large scale computing on massively parallel computing platforms and distributed processors.

  5. Environmental surveillance at Los Alamos during 1991. Environmental protection group

    SciTech Connect

    Dewart, J.; Kohen, K.L.

    1993-08-01

    This report describes the environmental surveillance program conducted by Los Alamos National Laboratory during 1991. Routine monitoring for radiation and for radioactive and chemical materials is conducted on the Laboratory site as well as in the surrounding region. Monitoring results are used to determine compliance with appropriate standards and to permit early identification of potentially undesirable trends. Results and interpretation of data for 1991 cover external penetrating radiation; quantities of airborne emissions and effluents; concentrations of chemicals and radionuclides in ambient air, surface waters and groundwaters, municipal water supply, soils and sediments, and foodstuffs; and environmental compliance. Comparisons with appropriate standards, regulations, and background levels provide the basis for concluding that environmental effects from Laboratory operations are small and do not pose a threat to the public, Laboratory employees, or the environment.

  6. Misuse and intrusion detection at Los Alamos National Laboratory

    SciTech Connect

    Jackson, K.A.; Neuman, M.C.; Simmonds, D.D.; Stallings, C.A.; Thompson, J.L.; Christoph, G.G.

    1995-04-01

    An effective method for detecting computer misuse is the automatic auditing and analysis of on-line user activity. This activity is reflected in system audit records, in system vulnerability postures, and in other evidence found through active system testing. Since 1989 we have implemented a misuse and intrusion detection system at Los Alamos. This is the Network Anomaly Detection and Intrusion Reporter, or NADIR. NADIR currently audits a Kerberos distributed authentication system, file activity on a mass, storage system, and four Cray supercomputers that run the UNICOS operating system. NADIR summarizes user activity and system configuration in statistical profiles. It compares these profiles to expert rules that define security policy and improper or suspicious behavior. It reports suspicious behavior to security auditors and provides tools to aid in follow-up investigations, As NADIR is constantly evolving, this paper reports its development to date.

  7. Los Alamos Guns Take Aim at Material's Mysteries

    SciTech Connect

    Byers, Mark; Moore, David; Dimarino, Steve

    2014-04-14

    Los Alamos National Laboratory scientists and technicians conduct thousands of experiments a year, delving into the fundamental nature of everything from supernovas to subatomic particles. One set of instruments used to better understand the fundamental nature of various materials are 10 scientific gun systems that fire various projectiles at high-tech targets to create enormous velocities, pressures, and temperatures - and using laser, x-ray, and other diagnostics - explore the very nature of metals and other materials. The hundreds of gun-based experiments conducted every year at the Laboratory require a highly-skilled staff of scientists and technicians, and has given rise to a special organization called the "gun working group" to foster open communications, cooperation, problem-solving, and a healthy safety culture.

  8. Los Alamos Neutron Science Center (LANSCE) Nuclear Science Facilities

    SciTech Connect

    Nelson, Ronald Owen; Wender, Steve

    2015-06-19

    The Los Alamos Neutron Science Center (LANSCE) facilities for Nuclear Science consist of a high-energy "white" neutron source (Target 4) with 6 flight paths, three low-energy nuclear science flight paths at the Lujan Center, and a proton reaction area. The neutron beams produced at the Target 4 complement those produced at the Lujan Center because they are of much higher energy and have shorter pulse widths. The neutron sources are driven by the 800-MeV proton beam of the LANSCE linear accelerator. With these facilities, LANSCE is able to deliver neutrons with energies ranging from a milli-electron volt to several hundreds of MeV, as well as proton beams with a wide range of energy, time and intensity characteristics. The facilities, instruments and research programs are described briefly.

  9. The Los ALamos Neutron Science Center Hydrogen Moderator System

    NASA Astrophysics Data System (ADS)

    Jarmer, J. J.; Knudson, J. N.

    2006-04-01

    At the Los Alamos Neutron Science Center (LANSCE), spallation neutrons are produced by an 800-MeV proton beam interacting with tungsten targets. Gun-barrel-type penetrations through the heavy concrete and steel shielding that surround the targets collimate neutrons to form neutron beams used for scattering experiments. Two liquid hydrogen moderators of one-liter volume each are positioned adjacent to the neutron-production targets. Some of the neutrons that pass through a moderator interact with or scatter from protons in the hydrogen. The neutron-proton interaction reduces the energy or moderates neutrons to lower energies. Lower energy "moderated" neutrons are the most useful for some neutron scattering experiments. We provide a description of the LANSCE hydrogen-moderator system and its cryogenic performance with proton beams of up to 125 micro-amp average current.

  10. Los Alamos Explosives Performance Key to Stockpile Stewardship

    ScienceCinema

    Dattelbaum, Dana

    2016-07-12

    As the U.S. Nuclear Deterrent ages, one essential factor in making sure that the weapons will continue to perform as designed is understanding the fundamental properties of the high explosives that are part of a nuclear weapons system. As nuclear weapons go through life extension programs, some changes may be advantageous, particularly through the addition of what are known as "insensitive" high explosives that are much less likely to accidentally detonate than the already very safe "conventional" high explosives that are used in most weapons. At Los Alamos National Laboratory explosives research includes a wide variety of both large- and small-scale experiments that include small contained detonations, gas and powder gun firings, larger outdoor detonations, large-scale hydrodynamic tests, and at the Nevada Nuclear Security Site, underground sub-critical experiments.

  11. Neutron Capture Experiments Using the DANCE Array at Los Alamos

    SciTech Connect

    Dashdorj, D.; Mitchell, G. E.; Baramsai, B.; Chyzh, A.; Walker, C.; Agvaanluvsan, U.; Becker, J. A.; Parker, W.; Sleaford, B.; Wu, C. Y.; Bredeweg, T. A.; Couture, A.; Haight, R. C.; Jandel, M.; Rundberg, R. S.; Ullmann, J. L.; Vieira, D. J.; Wouters, J. M.; Krticka, M.; Becvar, F.

    2009-03-31

    The Detector for Advanced Neutron Capture Experiments (DANCE) is designed for neutron capture measurements on very small and/or radioactive targets. The DANCE array of 160 BaF{sub 2} scintillation detectors is located at the Lujan Center at the Los Alamos Neutron Science Center (LANSCE). Accurate measurements of neutron capture data are important for many current applications as well as for basic understanding of neutron capture. The gamma rays following neutron capture reactions have been studied by the time-of-flight technique using the DANCE array. The high granularity of the array allows measurements of the gamma-ray multiplicity. The gamma-ray multiplicities and energy spectra for different multiplicities can be measured and analyzed for spin and parity determination of the resolved resonances.

  12. Smoking patterns among Los Alamos National Laboratory employees

    SciTech Connect

    Mahoney, M.C.; Wilkinson, G.S.

    1987-06-01

    Smoking patterns among 5507 employees at Los Alamos National Laboratory were investigated for those who underwent physical examinations by occupational physicians from 1978 to 1983. More male than female employees smoked, although differences in smoking rates between the sexes were not as large as differences observed for national smoking rates. Employees over 40 were more likely to smoke than younger employees, males consumed more cigarettes than did females, and Anglo employees smoked more cigarettes than did Hispanic employees. Highly educated employees smoked less than did less-educated workers, and staff members exhibited the lowest rates of smoking. Smoking cessation programs for Laboratory employees should be directed toward those subpopulations with the highest rates of smoking. 31 refs., 8 figs., 1 tab.

  13. Plans for an Ultra Cold Neutron source at Los Alamos

    SciTech Connect

    Seestrom, S.J.; Bowles, T.J.; Hill, R.; Greene, G.L.

    1996-10-01

    Ultra Cold Neutrons (UCN) can be produced at spallation sources using a variety of techniques. To date the technique used has been to Bragg scatter and Doppler shift cold neutrons into UCN from a moving crystal. This is particularly applicable to short-pulse spallation sources. We are presently constructing a UCN source at LANSCE using this method. In addition, large gains in UCN density should be possible using cryogenic UCN sources. Research is under way at Gatchina to demonstrate technical feasibility of a frozen deuterium source. If successful, a source of this type could be implemented at future spallation source, such as the long pulse source being planned at Los Alamos, with a UCN density that may be two orders of magnitude higher than that presently available at reactors.

  14. Los Alamos National Laboratory Develops ''Quick to WIPP'' Strategy

    SciTech Connect

    Jones, R.; Allen, G.; Kosiewicz, S.; Martin, B,; LANL; Nunz, J.; Biedscheid, J.; Sellmer, T.; Willis, J.; Orban, J.; Liekhus, K.; Djordjevic, S.

    2003-02-25

    The Cerro Grande forest fire in May of 2000 and the terrorist events of September 11, 2001 precipitated concerns of the vulnerability of legacy contact-handled (CH), high-wattage transuranic (TRU) waste stored at Los Alamos National Laboratory (LANL). An analysis of the 9,100 cubic meters of stored CH-TRU waste revealed that 400 cubic meters or 4.5% of the inventory represented 61% of the risk. The analysis further showed that this 400 cubic meters was contained in only 2,000 drums. These facts and the question ''How can the disposition of this waste to the Waste Isolation Pilot Plant (WIPP) be accelerated?'' formed the genesis of LANL's Quick to WIPP initiative.

  15. Los Alamos National Laboratory support to IAEA environmental safeguards

    SciTech Connect

    Steiner, Robert E; Dry, Don E; Roensch, Fred R; Kinman, Will S; Roach, Jeff L; La Mont, Stephen P

    2010-12-01

    The nuclear and radiochemistry group provides sample preparation and analysis support to the International Atomic Energy Agency (IAEA) Network of Analytical Laboratories (NWAL). These analyses include both non-destructive (alpha and gamma-ray spectrometry) and destructive (thermal ionization mass spectrometry and inductively coupled plasma mass spectrometry) methods. On a bi-annual basis the NWAL laboratories are invited to meet to discuss program evolution and issues. During this meeting each participating laboratory summarizes their efforts over the previous two years. This presentation will present Los Alamos National Laboratories efforts in support of this program. Data showing results from sample and blank analysis will be presented along with capability enhancement and issues that arose over the previous two years.

  16. Los Alamos National Laboratory capability reviews - FY 2011 status

    SciTech Connect

    Springer, Everett P

    2011-01-12

    Capability reviews are the Los Alamos National Laboratory approach to assess the quality of its science, technology, and engineering (STE), and its integration across the Laboratory. There are seven capability reviews in FY 2011 reviews. The Weapons Science and Engineering review will be replaced by the National Nuclear Security Administration's Predictive Science Panel for 2011 . Beginning in 2011, third-year LORD projects will be reviewed by capability review committees rather than the first-year LORD projects that have been performed for the last three years. This change addresses concerns from committees about reviewing a project before it had made any substantive progress. The current schedule, and chairs for the 2011 capability reviews is presented. The three-year cycle (2011-2013) for capability reviews are presented for planning purposes.

  17. Decommissioning the UHTREX Reactor Facility at Los Alamos, New Mexico

    SciTech Connect

    Salazar, M.; Elder, J.

    1992-08-01

    The Ultra-High Temperature Reactor Experiment (UHTREX) facility was constructed in the late 1960s to advance high-temperature and gas-cooled reactor technology. The 3-MW reactor was graphite moderated and helium cooled and used 93% enriched uranium as its fuel. The reactor was run for approximately one year and was shut down in February 1970. The decommissioning of the facility involved removing the reactor and its associated components. This document details planning for the decommissioning operations which included characterizing the facility, estimating the costs of decommissioning, preparing environmental documentation, establishing a system to track costs and work progress, and preplanning to correct health and safety concerns in the facility. Work to decommission the facility began in 1988 and was completed in September 1990 at a cost of $2.9 million. The facility was released to Department of Energy for other uses in its Los Alamos program.

  18. Environmental surveillance and compliance at Los Alamos during 1996

    SciTech Connect

    1997-09-01

    This report presents environmental data that characterize environmental performance and addresses compliance with environmental standards and requirements at Los Alamos National Laboratory (LANL or the Laboratory) during 1996. The Laboratory routinely monitors for radiation and for radioactive nonradioactive materials at Laboratory sites as well as in the surrounding region. LANL uses the monitoring results to determine compliance with appropriate standards and to identify potentially undesirable trends. Data were collected in 1996 to assess external penetrating radiation; quantities of airborne emissions; and concentrations of chemicals and radionuclides in ambient air, surface waters and groundwaters, the municipal water supply, soils and sediments, and foodstuffs. Using comparisons with standards and regulations, this report concludes that environmental effects from Laboratory operations are small and do not pose a demonstrable threat to the public, Laboratory employees, or the environment. Laboratory operations were in compliance with all major environmental regulations.

  19. Common ground: An environmental ethic for Los Alamos National Laboratory

    SciTech Connect

    Menlove, F.L.

    1991-01-01

    Three predominant philosophies have characterized American business ethical thinking over the past several decades. The first phase is the ethics of self-interest'' which argues that maximizing self-interest coincidentally maximizes the common good. The second phase is legality ethics.'' Proponents argue that what is important is knowing the rules and following them scrupulously. The third phase might be called stake-holder ethics.'' A central tenant is that everyone affected by a decision has a moral hold on the decision maker. This paper will discuss one recent initiative of the Los Alamos National Laboratory to move beyond rules and regulations toward an environmental ethic that integrates the values of stakeholder ethics'' into the Laboratory's historical culture and value systems. These Common Ground Principles are described. 11 refs.

  20. Los Alamos Guns Take Aim at Material's Mysteries

    ScienceCinema

    Byers, Mark; Moore, David; Dimarino, Steve

    2016-07-12

    Los Alamos National Laboratory scientists and technicians conduct thousands of experiments a year, delving into the fundamental nature of everything from supernovas to subatomic particles. One set of instruments used to better understand the fundamental nature of various materials are 10 scientific gun systems that fire various projectiles at high-tech targets to create enormous velocities, pressures, and temperatures - and using laser, x-ray, and other diagnostics - explore the very nature of metals and other materials. The hundreds of gun-based experiments conducted every year at the Laboratory require a highly-skilled staff of scientists and technicians, and has given rise to a special organization called the "gun working group" to foster open communications, cooperation, problem-solving, and a healthy safety culture.

  1. Los Alamos National Laboratory TRU waste sampling projects

    SciTech Connect

    Yeamans, D.; Rogers, P.; Mroz, E.

    1997-02-01

    The Los Alamos National Laboratory (LANL) has begun characterizing transuranic (TRU) waste in order to comply with New Mexico regulations, and to prepare the waste for shipment and disposal at the Waste Isolation Pilot Plant (WIPP), near Carlsbad, New Mexico. Sampling consists of removing some head space gas from each drum, removing a core from a few drums of each homogeneous waste stream, and visually characterizing a few drums from each heterogeneous waste stream. The gases are analyzed by GC/MS, and the cores are analyzed for VOC`s and SVOC`s by GC/MS and for metals by AA or AE spectroscopy. The sampling and examination projects are conducted in accordance with the ``DOE TRU Waste Quality Assurance Program Plan`` (QAPP) and the ``LANL TRU Waste Quality Assurance Project Plan,`` (QAPjP), guaranteeing that the data meet the needs of both the Carlsbad Area Office (CAO) of DOE and the ``WIPP Waste Acceptance Criteria, Rev. 5,`` (WAC).

  2. Verification of 2-D Detonation Shock Dynamics in conjunction with Los Alamos Lagrangian hydrocode

    SciTech Connect

    Aida, Toru; Walter, John W.; Aslam, Tariq D.; Short, Mark

    2013-01-29

    As the latest version of the fast-tube Detonation Shock Dynamics (DSD) solver is linked with the Los Alamos Lagrangian hydrocode, verification problems from a 2006 DSD report (LA-14277 [1]) have been duplicated with some of the verification criteria changed to more quantitative ones. The observed error convergence is as good as or better than reported in [1], quite possibly due to the careful treatment of floating point numbers to ensure that their precision level is maintained throughout the code. This report duplicates the three sample verification problems in LA-14277 [1] using the Los Alamos ASC Lagrangian hydrocode (FLAG), official release of 3.2 Alpha6 with a few modifications. This version of FLAG is linked with the latest fast-tube Detonation Shock Dynamics (DSD) version beta 2 solver released in 2011 as part of the LanlDSD software product [2]. New verification criteria are used for the arcwave problem where two specific locations are chosen for burn arrival time comparison. For this report FLAG's internal driver code prepares the distance function ({Psi}) and material ID fields from its hydro setup, instead of the stand-alone driver that is being utilized by the other LANL hydrocodes currently interfaced to LanlDSD. As it is implemented in version 3.2 Alpha6, the {Psi} and material ID fields and other parameters are passed from FLAG to the DSD solver directly, and the burn table is directly passed back to FLAG as part of the calling arguments. The burn-front arrival time 'exact' solutions, mentioned in the sequel for the rate-stick and 'arc-wave' problems, are computed using a pair of special-purpose Fortran codes provided by Aslam [3]. In each case an ansatz for the form of the solution is made in which the radius from the detonator center point is used as the independent space coordinate. This leads to a simplified, problem-specific, 1D form of the governing equation. This equation is solved using 2nd-order spatial differencing and the forward Euler

  3. Flame height measurement of laminar inverse diffusion flames.

    SciTech Connect

    Shaddix, Christopher R.; Williams, Timothy C.; Blevins, Linda Gail; Mikofski, Mark A.

    2005-09-01

    Flame heights of co-flowing cylindrical ethylene-air and methane-air laminar inverse diffusion flames were measured. The luminous flame height was found to be greater than the height of the reaction zone determined by planar laser-induced fluorescence (PLIF) of hydroxyl radicals (OH) because of luminous soot above the reaction zone. However, the location of the peak luminous signals along the centerline agreed very well with the OH flame height. Flame height predictions using Roper's analysis for circular port burners agreed with measured reaction zone heights when using values for the characteristic diffusion coefficient and/or diffusion temperature somewhat different from those recommended by Roper. The fact that Roper's analysis applies to inverse diffusion flames is evidence that inverse diffusion flames are similar in structure to normal diffusion flames.

  4. Flame height measurement of laminar inverse diffusion flames

    SciTech Connect

    Mikofski, Mark A.; Williams, Timothy C.; Shaddix, Christopher R.; Blevins, Linda G.

    2006-07-15

    Flame heights of co-flowing cylindrical ethylene-air and methane-air laminar inverse diffusion flames were measured. The luminous flame height was found to be greater than the height of the reaction zone determined by planar laser-induced fluorescence (PLIF) of hydroxyl radicals (OH) because of luminous soot above the reaction zone. However, the location of the peak luminous signals along the centerline agreed very well with the OH flame height. Flame height predictions using Roper's analysis for circular port burners agreed with measured reaction zone heights when using values for the characteristic diffusion coefficient and/or diffusion temperature somewhat different from those recommended by Roper. The fact that Roper's analysis applies to inverse diffusion flames is evidence that inverse diffusion flames are similar in structure to normal diffusion flames. (author)

  5. 2013 Los Alamos National Laboratory Hazardous Waste Minimization Report

    SciTech Connect

    Salzman, Sonja L.; English, Charles J.

    2015-08-24

    Waste minimization and pollution prevention are inherent goals within the operating procedures of Los Alamos National Security, LLC (LANS). The US Department of Energy (DOE) and LANS are required to submit an annual hazardous waste minimization report to the New Mexico Environment Department (NMED) in accordance with the Los Alamos National Laboratory (LANL or the Laboratory) Hazardous Waste Facility Permit. The report was prepared pursuant to the requirements of Section 2.9 of the LANL Hazardous Waste Facility Permit. This report describes the hazardous waste minimization program (a component of the overall Waste Minimization/Pollution Prevention [WMin/PP] Program) administered by the Environmental Stewardship Group (ENV-ES). This report also supports the waste minimization and pollution prevention goals of the Environmental Programs Directorate (EP) organizations that are responsible for implementing remediation activities and describes its programs to incorporate waste reduction practices into remediation activities and procedures. LANS was very successful in fiscal year (FY) 2013 (October 1-September 30) in WMin/PP efforts. Staff funded four projects specifically related to reduction of waste with hazardous constituents, and LANS won four national awards for pollution prevention efforts from the National Nuclear Security Administration (NNSA). In FY13, there was no hazardous, mixedtransuranic (MTRU), or mixed low-level (MLLW) remediation waste generated at the Laboratory. More hazardous waste, MTRU waste, and MLLW was generated in FY13 than in FY12, and the majority of the increase was related to MTRU processing or lab cleanouts. These accomplishments and analysis of the waste streams are discussed in much more detail within this report.

  6. SNM holdup assessment of Los Alamos exhaust ducts. Final report

    SciTech Connect

    Marshall, R.S.

    1994-02-01

    Fissile material holdup in glovebox and fume hood exhaust ducting has been quantified for all Los Alamos duct systems. Gamma-based, nondestructive measurements were used to quantify holdup. The measurements were performed during three measurement campaigns. The first campaign, Phase I, provided foot-by-foot, semiquantitative measurement data on all ducting. These data were used to identify ducting that required more accurate (quantitative) measurement. Of the 280 duct systems receiving Phase I measurements, 262 indicated less than 50 g of fissile holdup and 19 indicated fissile holdup of 50 or more grams. Seven duct systems were measured in a second campaign, called Series 1, Phase II. Holdup estimates on these ducts ranged from 421 g of {sup 235}U in a duct servicing a shut-down uranium-machining facility to 39 g of {sup 239}Pu in a duct servicing an active plutonium-processing facility. Measurements performed in the second campaign proved excessively laborious, so a third campaign was initiated that used more efficient instrumentation at some sacrifice in measurement quality. Holdup estimates for the 12 duct systems measured during this third campaign ranged from 70 g of {sup 235}U in a duct servicing analytical laboratories to 1 g of {sup 235}U and 1 g of {sup 239}Pu in a duct carrying exhaust air to a remote filter building. These quantitative holdup estimates support the conclusion made at the completion of the Phase I measurements that only ducts servicing shut-down uranium operations contain about 400 g of fissile holdup. No ventilation ducts at Los Alamos contain sufficient fissile material holdup to present a criticality safety concern.

  7. Pinon Pine Tree Study, Los Alamos National Laboratory: Source document

    SciTech Connect

    P. R. Fresquez; J. D. Huchton; M. A. Mullen; L. Naranjo, Jr.

    2000-01-01

    One of the dominant tree species growing within and around Los Alamos National Laboratory (LANL), Los Alamos, NM, lands is the pinon pine (Pinus edulis) tree. Pinon pine is used for firewood, fence posts, and building materials and is a source of nuts for food--the seeds are consumed by a wide variety of animals and are also gathered by people in the area and eaten raw or roasted. This study investigated the (1) concentration of {sup 3}H, {sup 137}Cs, {sup 90}Sr, {sup tot}U, {sup 238}Pu, {sup 239,240}Pu, and {sup 241}Am in soils (0- to 12-in. [31 cm] depth underneath the tree), pinon pine shoots (PPS), and pinon pine nuts (PPN) collected from LANL lands and regional background (BG) locations, (2) concentrations of radionuclides in PPN collected in 1977 to present data, (3) committed effective dose equivalent (CEDE) from the ingestion of nuts, and (4) soil to PPS to PPN concentration ratios (CRs). Most radionuclides, with the exception of {sup 3}H in soils, were not significantly higher (p < 0.10) in soils, PPS, and PPN collected from LANL as compared to BG locations, and concentrations of most radionuclides in PPN from LANL have decreased over time. The maximum net CEDE (the CEDE plus two sigma minus BG) at the most conservative ingestion rate (10 lb [4.5 kg]) was 0.0018 mrem (0.018 {micro}Sv). Soil-to-nut CRs for most radionuclides were within the range of default values in the literature for common fruits and vegetables.

  8. Post-Cold War Science and Technology at Los Alamos

    NASA Astrophysics Data System (ADS)

    Browne, John C.

    2002-04-01

    Los Alamos National Laboratory serves the nation through the development and application of leading-edge science and technology in support of national security. Our mission supports national security by: ensuring the safety, security, and reliability of the U.S. nuclear stockpile; reducing the threat of weapons of mass destruction in support of counter terrorism and homeland defense; and solving national energy, environment, infrastructure, and health security problems. We require crosscutting fundamental and advanced science and technology research to accomplish our mission. The Stockpile Stewardship Program develops and applies, advanced experimental science, computational simulation, and technology to ensure the safety and reliability of U.S. nuclear weapons in the absence of nuclear testing. This effort in itself is a grand challenge. However, the terrorist attack of September 11, 2001, reminded us of the importance of robust and vibrant research and development capabilities to meet new and evolving threats to our national security. Today through rapid prototyping we are applying new, innovative, science and technology for homeland defense, to address the threats of nuclear, chemical, and biological weapons globally. Synergistically, with the capabilities that we require for our core mission, we contribute in many other areas of scientific endeavor. For example, our Laboratory has been part of the NASA effort on mapping water on the moon and NSF/DOE projects studying high-energy astrophysical phenomena, understanding fundamental scaling phenomena of life, exploring high-temperature superconductors, investigating quantum information systems, applying neutrons to condensed-matter and nuclear physics research, developing large-scale modeling and simulations to understand complex phenomena, and exploring nanoscience that bridges the atomic to macroscopic scales. In this presentation, I will highlight some of these post-cold war science and technology advances

  9. Environmental Assessment for Electrical Power System Upgrades at Los Alamos National Laboratory, Los Alamos, New Mexico - Final Document

    SciTech Connect

    N /A

    2000-03-09

    The ''National Environmental Policy Act of 1969'' (NEPA) requires Federal agency officials to consider the environmental consequences of their proposed actions before decisions are made. In complying with NEPA, the United States (U.S.) Department of Energy (DOE) follows the Council on Environmental Quality (CEQ) regulations (40 Code of Federal Regulations [CFR] 1500-1508) and DOE's NEPA implementing procedures (10 CFR 1021). The purpose of an Environmental Assessment (EA) is to provide Federal decision makers with sufficient evidence and analysis to determine whether to prepare an Environmental Impact Statement (EIS) or issue a Finding of No Significant Impact. In this case, the DOE decision to be made is whether to construct and operate a 19.5-mile (mi) (31-kilometer [km]) electric transmission line (power line) reaching from the Norton Substation, west across the Rio Grande, to locations within the Los Alamos National Laboratory (LANL) Technical Areas (TAs) 3 and 5 at Los Alamos, New Mexico. The construction of one electric substation at LANL would be included in the project as would the construction of two line segments less than 1,200 feet (ft) (366 meters [m]) long that would allow for the uncrossing of a portion of two existing power lines. Additionally, a fiber optics communications line would be included and installed concurrently as part of the required overhead ground conductor for the power line. The new power line would improve the reliability of electric service in the LANL and Los Aktrnos County areas as would the uncrossing of the crossed segments of the existing lines. Additionally, installation of the new power line would enable the LANL and the Los Alamos County electric grid, which is a shared resource, to be adapted to accommodate the future import of increased power when additional power service becomes available in the northern New Mexico area. Similarly, the fiber optics line would allow DOE to take advantage of future opportunities in

  10. Data Machine Independence

    1994-12-30

    Data-machine independence achieved by using four technologies (ASN.1, XDR, SDS, and ZEBRA) has been evaluated by encoding two different applications in each of the above; and their results compared against the standard programming method using C.

  11. Media independent interface

    NASA Technical Reports Server (NTRS)

    1987-01-01

    The work done on the Media Independent Interface (MII) Interface Control Document (ICD) program is described and recommendations based on it were made. Explanations and rationale for the content of the ICD itself are presented.

  12. Lens-assisted in vivo desensitization to heights.

    PubMed

    Schneider, J W

    1982-12-01

    Optical lenses that alter perceived depth may be usefully applied in the treatment of acrophobia. The present case report describes reverse viewing through binoculars to magnify apparent height during in vivo desensitization. The technique enables effective treatment from low actual heights, allows close control over exposure durations, and affords the opportunity to extend desensitization to apparent heights considerably greater than those ordinarily available for practice.

  13. Barrier heights of GaN Schottky contacts

    NASA Astrophysics Data System (ADS)

    Kampen, Thorsten U.; Mönch, Winfried

    1997-06-01

    Silver and lead contacts prepared by evaporation onto clean n-GaN(0001) surfaces are rectifying. Their zero-bias barrier heights and ideality factors were determined from the current-voltage characteristics. The observed linear correlation between the barrier heights and the ideality factors is attributed to nonuniform distributions of barrier heights along the interfaces. The barrier heights of ideal Schottky contacts depend on the applied voltage due to the image-force lowering only and their ideally factors nif are approximately 1.01. By extrapolation of our experimental data to n = 1.01, we obtain barrier heights of 0.82 eV and 0.73 eV for uniform Ag- and Pb/n-GaN(0001) contacts, respectively. By applying the idea of metal-induced gap states (MIGS), the barrier heights of ideal Schottky contacts have been predicted to vary linearly as a function of the difference of the metal and the semiconductor electronegativities. The zero-charge-transfer barrier height and slope parameter are characteristic of the respective semiconductor. The zero-charge-transfer barrier heights have been calculated using an empirical tight-binding approach and the slope parameters are given by the optical dielectric constants. The experimental barrier heights of GaN Schottky contacts confirm the predictions of the MIGS-and-electronegativity model.

  14. Two target height effects on interferometric synthetic aperture radar coherence

    SciTech Connect

    YOCKY,DAVID A.; JAKOWATZ JR.,CHARLES V.

    2000-03-07

    Useful products generated from interferometric synthetic aperture radar (IFSAR) complex data include height measurement, coherent change detection, and classification. The IFSAR coherence is a spatial measure of complex correlation between two collects, a product of IFSAR signal processing. A tacit assumption in such IFSAR signal processing is that one height target exists in each range-Doppler cell. This paper presents simulations of IFSAR coherence if two targets with different heights exist in a given range-Doppler cell, a condition in IFSAR collections produced by layover. It also includes airborne IFSAR data confirming the simulation results. The paper concludes by exploring the implications of the results on IFSAR classification and height measurements.

  15. Audit of the radioactive liquid waste treatment facility operations at the Los Alamos National Laboratory

    SciTech Connect

    1997-11-19

    Los Alamos National Laboratory (Los Alamos) generates radioactive and liquid wastes that must be treated before being discharged to the environment. Presently, the liquid wastes are treated in the Radioactive Liquid Waste Treatment Facility (Treatment Facility), which is over 30 years old and in need of repair or replacement. However, there are various ways to satisfy the treatment need. The objective of the audit was to determine whether Los Alamos cost effectively managed its Treatment Facility operations. The audit determined that Los Alamos` treatment costs were significantly higher when compared to similar costs incurred by the private sector. This situation occurred because Los Alamos did not perform a complete analysis of privatization or prepare a {open_quotes}make-or-buy{close_quotes} plan for its treatment operations, although a {open_quotes}make-or-buy{close_quotes} plan requirement was incorporated into the contract in 1996. As a result, Los Alamos may be spending $2.15 million more than necessary each year and could needlessly spend $10.75 million over the next five years to treat its radioactive liquid waste. In addition, Los Alamos has proposed to spend $13 million for a new treatment facility that may not be needed if privatization proves to be a cost effective alternative. We recommended that the Manager, Albuquerque Operations Office (Albuquerque), (1) require Los Alamos to prepare a {open_quotes}make-or-buy{close_quotes} plan for its radioactive liquid waste treatment operations, (2) review the plan for approval, and (3) direct Los Alamos to select the most cost effective method of operations while also considering other factors such as mission support, reliability, and long-term program needs. Albuquerque concurred with the recommendations.

  16. Height of convective layer in planetary atmospheres with condensable and non-condensable greenhouse substances

    NASA Astrophysics Data System (ADS)

    Makarieva, A. M.; Gorshkov, V. G.; Pujol, T.

    2003-12-01

    Convection reduces greenhouse effect by transporting a certain amount of non-radiative dynamic energy to the upper atmosphere, where this energy dissipates and radiates into space without interaction with greenhouse substances in the lower atmosphere. In this paper we show that the height of the convective layer zc is finite and independent of atmospheric optical thickness τs at large values of the latter. We derive an analytical formula for zc at large values of τs for condensable and non-condensable greenhouse substances. The formula obtained yields reasonable quantitative estimates of the observed height of convective layer on Venus and at low latitudes on Earth, where atmospheric thickness of water vapor is maximum. The dissipative power of dynamic convective processes is limited by the incoming flux of solar radiation. Height of convective layer being finite, values of optical depth at the top of the convective layer and at the mean height of convective energy dissipation increase proportionally to the atmospheric optical thickness, while the contribution of convective energy fluxes to formation of the outgoing flux of thermal radiation proportionally diminishes. As far as optical thickness of condensable greenhouse substances grows exponentially with increasing surface temperature, the obtained results lead to the conclusion that the outgoing thermal radiation into space in the presence of convection tends exponentially to zero with increasing surface temperature, instead of reaching a finite plateau as suggested by earlier radiative-convective studies.

  17. Population genetic differentiation of height and body mass index across Europe.

    PubMed

    Robinson, Matthew R; Hemani, Gibran; Medina-Gomez, Carolina; Mezzavilla, Massimo; Esko, Tonu; Shakhbazov, Konstantin; Powell, Joseph E; Vinkhuyzen, Anna; Berndt, Sonja I; Gustafsson, Stefan; Justice, Anne E; Kahali, Bratati; Locke, Adam E; Pers, Tune H; Vedantam, Sailaja; Wood, Andrew R; van Rheenen, Wouter; Andreassen, Ole A; Gasparini, Paolo; Metspalu, Andres; Berg, Leonard H van den; Veldink, Jan H; Rivadeneira, Fernando; Werge, Thomas M; Abecasis, Goncalo R; Boomsma, Dorret I; Chasman, Daniel I; de Geus, Eco J C; Frayling, Timothy M; Hirschhorn, Joel N; Hottenga, Jouke Jan; Ingelsson, Erik; Loos, Ruth J F; Magnusson, Patrik K E; Martin, Nicholas G; Montgomery, Grant W; North, Kari E; Pedersen, Nancy L; Spector, Timothy D; Speliotes, Elizabeth K; Goddard, Michael E; Yang, Jian; Visscher, Peter M

    2015-11-01

    Across-nation differences in the mean values for complex traits are common, but the reasons for these differences are unknown. Here we find that many independent loci contribute to population genetic differences in height and body mass index (BMI) in 9,416 individuals across 14 European countries. Using discovery data on over 250,000 individuals and unbiased effect size estimates from 17,500 sibling pairs, we estimate that 24% (95% credible interval (CI) = 9%, 41%) and 8% (95% CI = 4%, 16%) of the captured additive genetic variance for height and BMI, respectively, reflect population genetic differences. Population genetic divergence differed significantly from that in a null model (height, P < 3.94 × 10(-8); BMI, P < 5.95 × 10(-4)), and we find an among-population genetic correlation for tall and slender individuals (r = -0.80, 95% CI = -0.95, -0.60), consistent with correlated selection for both phenotypes. Observed differences in height among populations reflected the predicted genetic means (r = 0.51; P < 0.001), but environmental differences across Europe masked genetic differentiation for BMI (P < 0.58). PMID:26366552

  18. A Hybrid GWR-Based Height Estimation Method for Building Detection in Urban Environments

    NASA Astrophysics Data System (ADS)

    Wei, X.; Yao, X.

    2014-11-01

    LiDAR has become important data sources in urban modelling. Traditional methods of LiDAR data processing for building detection require high spatial resolution data and sophisticated methods. The aerial photos, on the other hand, provide continuous spectral information of buildings. But the segmentation of the aerial photos cannot distinguish between the road surfaces and the building roof. This paper develops a geographically weighted regression (GWR)-based method to identify buildings. The method integrates characteristics derived from the sparse LiDAR data and from aerial photos. In the GWR model, LiDAR data provide the height information of spatial objects which is the dependent variable, while the brightness values from multiple bands of the aerial photo serve as the independent variables. The proposed method can thus estimate the height at each pixel from values of its surrounding pixels with consideration of the distances between the pixels and similarities between their brightness values. Clusters of contiguous pixels with higher estimated height values distinguish themselves from surrounding roads or other surfaces. A case study is conducted to evaluate the performance of the proposed method. It is found that the accuracy of the proposed hybrid method is better than those by image classification of aerial photos along or by height extraction of LiDAR data alone. We argue that this simple and effective method can be very useful for automatic detection of buildings in urban areas.

  19. South America, Shaded Relief and Colored Height

    NASA Technical Reports Server (NTRS)

    2003-01-01

    that indicate the occurrence of simple erosional processes acting upon fairly uniform bedrock. Very smooth plateaus here are remnants of landforms most likely developed under geologic and environmental conditions much different than those present today. Fractures paralleling the coast are likely related to the opening of the Atlantic Ocean as South America drifted away from Africa, starting about 130 million years ago.

    To the southwest, broad lowlands host the Gran Chaco and Pampas regions. The depositional Gran Chaco drainages run almost exclusively from west to east from the Andes Mountains to the western edge of the Brazilian Highlands as a result of the much greater sediment supply from the Andes. Geologic processes on the Pampas are much more diverse, with stream erosion, stream deposition, subsidence, and wind processes all evident, even at the one-kilometer resolution shown here.

    Further south, Patagonia also displays these geologic processes plus more prominent volcanic features, including bumpy mesas, which are lava plateaus with small (and some large) volcanic cones. At its southern tip South America breaks into islands that include Tierra del Fuego and the Straits of Magellan.

    Two visualization methods were combined to produce the image: shading and color coding of topographic height. The shade image was derived by computing topographic slope in the northwest-southeast direction, so that northwest slopes appear bright and southeast slopes appear dark. Color coding is directly related to topographic height, with green at the lower elevations, rising through yellow and tan, to white at the highest elevations.

    Elevation data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was

  20. Scaling of adult body weight to height across sex and race/ethnic groups: relevance to BMI1234

    PubMed Central

    Peterson, Courtney M; Thomas, Diana M; Heo, Moonseong; Schuna, John M; Hong, Sangmo; Choi, Woong

    2014-01-01

    Background: Body mass index (BMI) is formulated on the assumption that body weight (BW) scales to height with a power of 2 (BW∝height2), independent of sex and race-ethnicity. Powers differing from 2 are observed in studies of selected samples, thus raising the question if BMI is a generalizable metric that makes BW independent of height across populations. Objectives: The objectives were to test the hypothesis that adult BW scales to height with a power of 2 independent of sex and race-ethnicity and to advance an understanding of BMI as a measure of shape by extending allometric analyses to waist circumference (WC). Design: We conducted cross-sectional subject evaluations, including body composition, from the NHANES and the Korean NHANES (KNHANES). Variations of the allometric model (Y = αXβ) were used to establish height scaling powers (β ± SE) across non-Hispanic white and black, Mexican American, and Korean men and women. Results: Exploratory analyses in population samples established age and adiposity as important independent determinants of height scaling powers (i.e., β). After age and adiposity in the next series of analyses were controlled for, BW scaling powers were nonsignificantly different between race/ethnic groups within each sex group; WC findings were similar in women, whereas small but significant between-race differences were observed in the men. Sex differences in β values were nonsignificant except for BW in non-Hispanic blacks and WC in Koreans (P < 0.05). Nationally representative powers for BW were (NHANES/KNHANES) 2.12 ± 0.05/2.11 ± 0.06 for men and 2.02 ± 0.04/1.99 ± 0.06 for women and for WC were 0.66 ± 0.03/0.67 ± 0.05 for men and 0.61 ± 0.04/0.56 ± 0.05 for women. Conclusions: Adult BW scales to height with a power of ∼2 across the 8 sex and race/ethnic groups, an observation that makes BMI a generalizable height-independent measure of shape across most populations. WC also follows generalizable scaling rules, a

  1. NEPA and NHPA- successful decommissioning of historic Manhattan Project properties at Los Alamos National Laboratory, Los Alamos, New Mexico

    SciTech Connect

    McGehee, E.D.; Pendergrass, A.K.

    1997-05-21

    This paper describes experiences at Los Alamos National Laboratory during the process of planning and executing decommissioning and decontamination activities on a number of properties constructed as part of the Manhattan project. Many of these buildings had been abandoned for many years and were in deteriorating condition, in addition to being contaminated with asbestos, lead based paints and high explosive residues. Due to the age and use of the structures they were evaluated against criteria for the National Register of Historic Places. This process is briefly reviewed, along with the results, as well as actions implemented as a result of the condition and safety of the structures. A number of the structures have been decontaminated and demolished. Planning is still ongoing for the renovation of one structure, and the photographic and drawing records of the properties is near completion.

  2. Ecological baseline studies in Los Alamos and Guaje Canyons County of Los Alamos, New Mexico. A two-year study

    SciTech Connect

    Foxx, T.S.

    1995-11-01

    During the summers of 1993 and 1994, the Biological Resource Evaluations Team (BRET) of the Environmental Protection Group (ESH-8) conducted baseline studies within two canyon systems, Los Alamos and Guaje Canyons. Biological data was collected within each canyon to provide background and baseline information for Ecological Risk models. Baseline studies included establishment of permanent vegetation plots within each canyon along the elevational gradient. Then, in association with the various vegetation types, surveys were conducted for ground dwelling insects, birds, and small mammals. The stream channels associated with the permanent vegetation plots were characterized and aquatic macroinvertebrates collected within the stream monthly throughout a six-month period. The Geographic Position System (GPS) in combination with ARC INFO was used to map the study areas. Considerable data was collected during these surveys and are summarized in individual chapters.

  3. Shod landing provides enhanced energy dissipation at the knee joint relative to barefoot landing from different heights.

    PubMed

    Yeow, C H; Lee, P V S; Goh, J C H

    2011-12-01

    Athletic shoes can directly provide shock absorption at the foot due to its cushioning properties, however it remains unclear how these shoes may affect the level of energy dissipation contributed by the knee joint. This study sought to investigate biomechanical differences, in terms of knee kinematics, kinetics and energetics, between barefoot and shod landing from different heights. Twelve healthy male recreational athletes were recruited and instructed to perform double-leg landing from 0.3-m and 0.6-m heights in barefoot and shod conditions. The shoe model tested was Brooks Maximus II. Markers were placed on the subjects based on the Plug-in Gait Marker Set. Force-plates and motion-capture system were used to capture ground reaction force (GRF) and kinematics data respectively. 2×2-ANOVA (barefoot/shod condition×landing height) was performed to examine differences in knee kinematics, kinetics and energetics between barefoot and shod conditions from different landing heights. Peak GRF was not significantly different (p=0.732-0.824) between barefoot and shod conditions for both landing heights. Knee range-of-motion, flexion angular velocity, external knee flexion moment, and joint power and work were higher during shod landing (p<0.001 to p=0.007), compared to barefoot landing for both landing heights. No significant interactions (p=0.073-0.933) were found between landing height and barefoot/shod condition for the tested parameters. While the increase in landing height can elevate knee energetics independent of barefoot/shod conditions, we have also shown that the shod condition was able to augment the level of energy dissipation contributed by the knee joint, via the knee extensors, regardless of the tested landing heights.

  4. Process Modeling and Analysis for Radioactive Solid Waste Management at Los Alamos

    SciTech Connect

    Kornreich, D.E.; Parker, R.Y.; Gonzales-Lujan, J.M.

    2006-07-01

    Los Alamos National Laboratory has created a discrete-event simulation model of the nuclear waste drum characterization operations the 'processing/inspection - Los Alamos model of drums equivalent' ({pi} a la mode). This model takes drum inventory data, process-related information, and planned processing priorities related to the solid-waste management operations at Los Alamos to assess the resulting characterization process and resulting schedule for drum shipments to the Waste Isolation Pilot Plant. The model tracks the drum inventory, material inventory, and equipment as a function of time. Data from the model and some sample results are presented in this paper. (authors)

  5. Los Alamos National Laboratory: 21st century solutions to urgent national challenges

    SciTech Connect

    Mcbranch, Duncan

    2008-01-01

    Los Alamos National Laboratory has been called upon to meet urgent national challenges for more than 65 years. The people, tools, and technologies at Los Alamos are a world class resource that has proved decisive through our history, and are needed in the future. We offer expertise in nearly every science, technology, and engineering discipline, a unique integrated capability for large-scale computing and experimentation, and the proven ability to deliver solutions involving the most complex and difficult technical systems. This white paper outlines some emerging challenges and why the nation needs Los Alamos, the premier National Security Science Laboratory, to meet these challenges.

  6. Radionuclide concentrations in pinto beans, sweet corn, and zucchini squash grown in Los Alamos Canyon at Los Alamos National Laboratory

    SciTech Connect

    Fresquez, P.R.; Mullen, M.A.; Naranjo, L. Jr.; Armstrong, D.R.

    1997-05-01

    Pinto beans, sweet corn, and zucchini squash (Cucurbita pepo var. black beauty) were grown in a randomized complete-block field/pot experiment at a site that contained the highest observed levels of surface gross gamma radioactivity within Los Alamos Canyon (LAC) at Los Alamos National Laboratory. Soils as well as washed edible and nonedible crop tissues were analyzed for various radionuclides and heavy metals . Most radionuclides, with the exception of {sup 3}H and {sup tot}U, in soil from LAC were detected in significantly higher concentrations (p <0.01) than in soil collected from regional background (RBG) locations. Similarly, most radionuclides in edible crop portions of beans, squash, and corn were detected in significantly higher (p <0.01 and 0.05) concentrations than RBG. Most soil-to-plant concentration ratios for radionuclides in edible and nonedible crop tissues from LAC were within the default values given by the Nuclear Regulatory Commission and Environmental Protection Agency. All heavy metals in soils, as well as edible and nonedible crop tissues grown in soils from LAC, were within RBG concentrations. Overall, the total maximum net positive committed effective dose equivalent (CEDE)--the CEDE plus two sigma for each radioisotope minus background and then all positive doses summed--to a hypothetical 50-year resident that ingested 160 kg of beans, corn, and squash in equal proportions, was 74 mrem y{sup -1}. This dose was below the International Commission on Radiological Protection permissible dose limit (PDL) of 100 mrem y{sup -1} from all pathways; however, the addition of other internal and external exposure route factors may increase the overall dose over the PDL. Also, the risk of an excess cancer fatality, based on 74 mrem y{sup -1}, was 3.7 x 10{sup -5} (37 in a million), which is above the Environmental Protection Agency`s (acceptable) guideline of one in a million. 31 refs., 15 tabs.

  7. Mississippi Delta, Radar Image with Colored Height

    NASA Technical Reports Server (NTRS)

    2005-01-01

    [figure removed for brevity, see original site] Click on the image for the animation

    About the animation: This simulated view of the potential effects of storm surge flooding on Lake Pontchartrain and the New Orleans area was generated with data from the Shuttle Radar Topography Mission. Although it is protected by levees and sea walls against storm surges of 18 to 20 feet, much of the city is below sea level, and flooding due to storm surges caused by major hurricanes is a concern. The animation shows regions that, if unprotected, would be inundated with water. The animation depicts flooding in one-meter increments.

    About the image: The geography of the New Orleans and Mississippi delta region is well shown in this radar image from the Shuttle Radar Topography Mission. In this image, bright areas show regions of high radar reflectivity, such as from urban areas, and elevations have been coded in color using height data also from the mission. Dark green colors indicate low elevations, rising through yellow and tan, to white at the highest elevations.

    New Orleans is situated along the southern shore of Lake Pontchartrain, the large, roughly circular lake near the center of the image. The line spanning the lake is the Lake Pontchartrain Causeway, the world's longest over water highway bridge. Major portions of the city of New Orleans are below sea level, and although it is protected by levees and sea walls, flooding during storm surges associated with major hurricanes is a significant concern.

    Data used in this image were acquired by the Shuttle Radar Topography Mission aboard the Space Shuttle Endeavour, launched on Feb. 11, 2000. The mission used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar that flew twice on the Space Shuttle Endeavour in 1994. The Shuttle Radar Topography Mission was designed to collect 3-D measurements of the Earth's surface. To collect the 3-D data

  8. Tsunami focusing and leading wave height

    NASA Astrophysics Data System (ADS)

    Kanoglu, Utku

    2016-04-01

    and Synolakis, 1994, Proc. R. Soc. A: Math. Phys. Eng. Sci., 445, 99-112) with a finite crest length, which is most common tsunami initial waveform. We fit earthquake initial waveform calculated through Okada (1985, Bull. Seismol. Soc. Am. 75, 1135-1040) to the N-wave form presented by Tadepalli and Synolakis (1994). First, we investigate focusing phenomena as presented by Kanoglu et al. (2013, Proc. R. Soc. A: Math. Phys. Eng. Sci., 469, 20130015) and compare our results with their non-dispersive and dispersive linear analytical solutions. We confirm focusing phenomena, which amplify the wave height in the leading depression side. We then study sequencing of an N-wave profile with a finite crest length. Our preliminary results show that sequencing is more pronounced on the leading depression side. We perform parametric study to understand sequencing in terms of N-wave, hence earthquake, parameters. We then discuss the results both in terms of tsunami focusing and leading wave amplitude. Acknowledgment: The research leading to these results has received funding from the European Union's Seventh Framework Programme (FP7/2007-2013) under grant agreement no 603839 (Project ASTARTE - Assessment, Strategy and Risk Reduction for Tsunamis in Europe).

  9. Absorber height effects on SWA restrictions and 'Shadow' LER

    SciTech Connect

    McClinton, Brittany; Naulleau, Patrick

    2011-02-21

    for a good quality photoresist to print. Using this DOF, we optimize the process window and adjust the intensity threshold from it's nominal value to a new optimal value. From this optimized intensity threshold, we calculated the aerial image CD through focus for a range of angles around the nominal SWA value. From this, we can find out how much the SWA needs to be constrained by in order to keep the {+-}10% CD error budget tolerance required. For SWA of 80 degrees, we found the nominal SWA is tightly constrained by 0.5 degrees. We repeated these calculations for other nominal values of SWA 85 and 88 degrees, and found that CD sensitivity to nominal SWA is relatively independent. In examining shadow LER, we use FDTD simulations to obtain a rigorous solution for the source intensity immediately after the patterned TaN mask absorber pattern on a 2.5nm Ru capped 40 bilayer ML mirror. The optical system was comprised of an ideal pupil map, NA = 0.32, 13.4nm light at 4{sup o} off-axis, and annular source shape with partial coherence factor of {sigma} = 0.35-0.55. We assumed a 90{sup o} SWA. For the basic 2D shape of the mask that we exactly replicated through height, we created mask LER by generating a sine wave of full amplitude 4nm, equivalent to 4nm LER, (wafer dim.), confined along it's length to precisely CD=22nm, for sine waves with spatial frequencies (full period) of 25, 50, 75, 100, 125, 150, 175, and 200nm (wafer dim.), and illuminated at both {phi}=0{sup o} (perpendicular, shadowing) and {phi}=90{sup o} (parallel, no shadowing). Results show that even off-axis illumination perpendicular to the lines and spaces gives minimal difference between the left and right LER to at most 0.1nm difference at best focus. We followed up this study by repeating the data for a mask designed with 2nm LER with similar results. A plot of the transfer functions for LER of both 2nm and 4nm compared to the contrast of simple 50% duty cycle lines and spaces shows that LER has a unique

  10. Chronometric measurement of the orthometric height differences by means of atomic clocks

    NASA Astrophysics Data System (ADS)

    Kopeikin, Sergei; Mazurova, Elena; Kanushin, Vadim F.; Karpik, Alexander P.; Tolstikov, Alexander S.; Gienko, Elena G.; Goldobin, Denis N.; Kosarev, Nikolay S.; Ganagina, Irina G.; Karaush, Artem A.; Hanikova, Ekaterina A.

    2016-07-01

    We report on the experimental results of the approbation of a new physical method of determination of the potential difference of the gravity force and the orthometric heights by means of the measurement of the gravitational red shift of frequency with atomic clocks. The experiment has been performed on the territory of Altai Mountains between two geodetic stations "Shebalino" and "Seminsky" which are separated in altitude by about 850 meters. The mean value of the frequency shift caused by the change in the potential of the gravity force measured between the two geodetic stations was found to be equal to δ f/f=7.98× 10^{-14} with the dispersion being equal to σ _{f} =7.27× 10^{-15} . This difference perfectly agrees with the independent geodetic measurements of the height difference between the two stations.

  11. Model-independent particle accelerator tuning

    DOE PAGES

    Scheinker, Alexander; Pang, Xiaoying; Rybarcyk, Larry

    2013-10-21

    We present a new model-independent dynamic feedback technique, rotation rate tuning, for automatically and simultaneously tuning coupled components of uncertain, complex systems. The main advantages of the method are: 1) It has the ability to handle unknown, time-varying systems, 2) It gives known bounds on parameter update rates, 3) We give an analytic proof of its convergence and its stability, and 4) It has a simple digital implementation through a control system such as the Experimental Physics and Industrial Control System (EPICS). Because this technique is model independent it may be useful as a real-time, in-hardware, feedback-based optimization scheme formore » uncertain and time-varying systems. In particular, it is robust enough to handle uncertainty due to coupling, thermal cycling, misalignments, and manufacturing imperfections. As a result, it may be used as a fine-tuning supplement for existing accelerator tuning/control schemes. We present multi-particle simulation results demonstrating the scheme’s ability to simultaneously adaptively adjust the set points of twenty two quadrupole magnets and two RF buncher cavities in the Los Alamos Neutron Science Center Linear Accelerator’s transport region, while the beam properties and RF phase shift are continuously varying. The tuning is based only on beam current readings, without knowledge of particle dynamics. We also present an outline of how to implement this general scheme in software for optimization, and in hardware for feedback-based control/tuning, for a wide range of systems.« less

  12. Tree height growth indicating drought and nitrogen deposition

    NASA Astrophysics Data System (ADS)

    Gulyás, Krisztina; Berki, Imre

    2016-04-01

    Several studies have been reported the increasing trends of forest growth in Europe in the last decades. Sites, where the water is not limiting factor, the increasing carbon dioxide (CO2) concentration and high nitrogen deposition influenced accelerated tree height growth. However few researches show that the drying climate conditions and water deficit cause slow/not definite trend of tree height growth in forests. The aim of our study presents the effects of drying climate and surplus nitrogen on height growth of sessile oak (Quercus petraea). Almost 50 sessile oak stands (with zonal site condition) have been measured along a humid-arid climatic transect in Hungary. Top heights of the trees are the best dendrometric parameter for indicating the changing site conditions. Observed top heights dates were compared with 50-years climate condition along the humid-arid climatic transect. Tree height growth in the dry and mesic section of climatic gradient slowed at the last 4 decades, because of the increasing frequency of dry periods. Accelerated height growth were measured in the mesic and humid section of transect, where the nitrogen deposition due to local air pollution were higher than the background deposition. These results draw attention to the importance of the drying climate and surplus nitrogen in the global changes. Keywords: climate change impacts, drought periods, surplus deposition, tree height growth Acknowledgements: Research is supported by the "Agroclimate.2" (VKSZ_12-1-2013-0034) EU-national joint funded research project.

  13. 47 CFR 95.1315 - Antenna height restriction.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 5 2011-10-01 2011-10-01 false Antenna height restriction. 95.1315 Section 95... PERSONAL RADIO SERVICES Multi-Use Radio Service (MURS) General Provisions § 95.1315 Antenna height restriction. The highest point of any MURS antenna must no be more than 18.3 meters (60 feet) above the...

  14. 47 CFR 90.205 - Power and antenna height limits.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 5 2012-10-01 2012-10-01 false Power and antenna height limits. 90.205 Section... SERVICES PRIVATE LAND MOBILE RADIO SERVICES General Technical Standards § 90.205 Power and antenna height.... (d) 150-174 MHz. (1) The maximum allowable station ERP is dependent upon the station's antenna...

  15. 47 CFR 95.1315 - Antenna height restriction.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Antenna height restriction. 95.1315 Section 95... PERSONAL RADIO SERVICES Multi-Use Radio Service (MURS) General Provisions § 95.1315 Antenna height restriction. The highest point of any MURS antenna must no be more than 18.3 meters (60 feet) above the...

  16. 47 CFR 95.1315 - Antenna height restriction.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 5 2012-10-01 2012-10-01 false Antenna height restriction. 95.1315 Section 95... PERSONAL RADIO SERVICES Multi-Use Radio Service (MURS) General Provisions § 95.1315 Antenna height restriction. The highest point of any MURS antenna must no be more than 18.3 meters (60 feet) above the...

  17. 47 CFR 90.205 - Power and antenna height limits.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 5 2011-10-01 2011-10-01 false Power and antenna height limits. 90.205 Section... SERVICES PRIVATE LAND MOBILE RADIO SERVICES General Technical Standards § 90.205 Power and antenna height.... (d) 150-174 MHz. (1) The maximum allowable station ERP is dependent upon the station's antenna...

  18. 47 CFR 95.1315 - Antenna height restriction.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 5 2013-10-01 2013-10-01 false Antenna height restriction. 95.1315 Section 95... PERSONAL RADIO SERVICES Multi-Use Radio Service (MURS) General Provisions § 95.1315 Antenna height restriction. The highest point of any MURS antenna must no be more than 18.3 meters (60 feet) above the...

  19. 47 CFR 95.1315 - Antenna height restriction.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 5 2014-10-01 2014-10-01 false Antenna height restriction. 95.1315 Section 95... PERSONAL RADIO SERVICES Multi-Use Radio Service (MURS) General Provisions § 95.1315 Antenna height restriction. The highest point of any MURS antenna must no be more than 18.3 meters (60 feet) above the...

  20. 47 CFR 90.205 - Power and antenna height limits.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Power and antenna height limits. 90.205 Section... SERVICES PRIVATE LAND MOBILE RADIO SERVICES General Technical Standards § 90.205 Power and antenna height.... (d) 150-174 MHz. (1) The maximum allowable station ERP is dependent upon the station's antenna...

  1. 47 CFR 90.205 - Power and antenna height limits.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 5 2014-10-01 2014-10-01 false Power and antenna height limits. 90.205 Section... SERVICES PRIVATE LAND MOBILE RADIO SERVICES General Technical Standards § 90.205 Power and antenna height.... (d) 150-174 MHz. (1) The maximum allowable station ERP is dependent upon the station's antenna...

  2. 47 CFR 90.205 - Power and antenna height limits.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 5 2013-10-01 2013-10-01 false Power and antenna height limits. 90.205 Section... SERVICES PRIVATE LAND MOBILE RADIO SERVICES General Technical Standards § 90.205 Power and antenna height.... (d) 150-174 MHz. (1) The maximum allowable station ERP is dependent upon the station's antenna...

  3. 2. VIEW SOUTHWEST, prime search radar tower, height finder radar ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. VIEW SOUTHWEST, prime search radar tower, height finder radar towards, height finder radar towers, and radar tower (unknown function) - Fort Custer Military Reservation, P-67 Radar Station, .25 mile north of Dickman Road, east of Clark Road, Battle Creek, Calhoun County, MI

  4. Socioeconomic development and secular trend in height in China.

    PubMed

    Zong, Xin-Nan; Li, Hui; Wu, Hua-Hong; Zhang, Ya-Qin

    2015-12-01

    The objective of this study was to examine the effect of socioeconomic development on secular trend in height among children and adolescents in China. Body height and spermarcheal/menarcheal ages were obtained from two periodic large-scale national representative surveys in China between 1975 and 2010. Chinese socioeconomic development indicators were obtained from the United Nations world population prospects. The effects of plausible determinants were assessed by partial least-squares regression. The average height of children and adolescents improved in tandem with socioeconomic development, without any tendency to plateau. The increment of height trend presented larger around puberty than earlier or later ages. The partial least-squares regressions with gross national income, life expectancy and spermarcheal/menarcheal age accounted for increment of height trend from 88.3% to 98.3% for males and from 82.9% to 97.3% for females in adolescence. Further, through the analysis of the variable importance for projection, the contributions of gross national income and life expectancy on height increment were confirmed to be significant in childhood and adolescence, and the contribution of spermarcheal/menarcheal age was superior to both of them in adolescence. We concluded that positive secular trend in height in China was significantly associated with socioeconomic status (GNI as indicator) and medical and health conditions (life expectancy as indicator). Earlier onset of spermarche and menarche proved to be an important role in larger increment of the trend over time of height at puberty for a population.

  5. 16 CFR 1509.3 - Crib-side height.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Crib-side height. 1509.3 Section 1509.3 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR NON-FULL-SIZE BABY CRIBS § 1509.3 Crib-side height. (a) With the mattress support in...

  6. 16 CFR 1509.3 - Crib-side height.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Crib-side height. 1509.3 Section 1509.3 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR NON-FULL-SIZE BABY CRIBS § 1509.3 Crib-side height. (a) With the mattress support in...

  7. The Height and Range of Watermelons without Wall

    NASA Astrophysics Data System (ADS)

    Feierl, Thomas

    We determine the weak limit of the distribution of the random variables "height" and "range" on the set of p-watermelons without wall restriction as the number of steps tends to infinity. Additionally, we provide asymptotics for the moments of the random variable "height".

  8. 40 CFR 52.383 - Stack height review.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Stack height review. 52.383 Section 52.383 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED... by stack height credits greater than good engineering practice or any other prohibited...

  9. 40 CFR 52.990 - Stack height regulations.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Stack height regulations. 52.990 Section 52.990 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... emission limitation for a specific source exceeds the height allowed by Section 921(A) “Good...

  10. Quantitative vertebral compression fracture evaluation using a height compass

    NASA Astrophysics Data System (ADS)

    Yao, Jianhua; Burns, Joseph E.; Wiese, Tatjana; Summers, Ronald M.

    2012-03-01

    Vertebral compression fractures can be caused by even minor trauma in patients with pathological conditions such as osteoporosis, varying greatly in vertebral body location and compression geometry. The location and morphology of the compression injury can guide decision making for treatment modality (vertebroplasty versus surgical fixation), and can be important for pre-surgical planning. We propose a height compass to evaluate the axial plane spatial distribution of compression injury (anterior, posterior, lateral, and central), and distinguish it from physiologic height variations of normal vertebrae. The method includes four steps: spine segmentation and partition, endplate detection, height compass computation and compression fracture evaluation. A height compass is computed for each vertebra, where the vertebral body is partitioned in the axial plane into 17 cells oriented about concentric rings. In the compass structure, a crown-like geometry is produced by three concentric rings which are divided into 8 equal length arcs by rays which are subtended by 8 common central angles. The radius of each ring increases multiplicatively, with resultant structure of a central node and two concentric surrounding bands of cells, each divided into octants. The height value for each octant is calculated and plotted against octants in neighboring vertebrae. The height compass shows intuitive display of the height distribution and can be used to easily identify the fracture regions. Our technique was evaluated on 8 thoraco-abdominal CT scans of patients with reported compression fractures and showed statistically significant differences in height value at the sites of the fractures.

  11. Effects of time and height on behavior of emissions.

    PubMed

    Van der Hoven, I

    1975-04-01

    The effect of the two parameters is reviewed. Variability with time is discussed in relation to stability and other atmospheric conditions. The magnitude of ground level concentrations from elevated release is discussed as an interaction between rate of emission release, physical height of stack, and thermal conditions. The point is made that plant effluent rates have increased in proportion to stack height.

  12. Independent NOAA considered

    NASA Astrophysics Data System (ADS)

    Richman, Barbara T.

    A proposal to pull the National Oceanic and Atmospheric Administration (NOAA) out of the Department of Commerce and make it an independent agency was the subject of a recent congressional hearing. Supporters within the science community and in Congress said that an independent NOAA will benefit by being more visible and by not being tied to a cabinet-level department whose main concerns lie elsewhere. The proposal's critics, however, cautioned that making NOAA independent could make it even more vulnerable to the budget axe and would sever the agency's direct access to the President.The separation of NOAA from Commerce was contained in a June 1 proposal by President Ronald Reagan that also called for all federal trade functions under the Department of Commerce to be reorganized into a new Department of International Trade and Industry (DITI).

  13. Independent technical review, handbook

    SciTech Connect

    Not Available

    1994-02-01

    Purpose Provide an independent engineering review of the major projects being funded by the Department of Energy, Office of Environmental Restoration and Waste Management. The independent engineering review will address questions of whether the engineering practice is sufficiently developed to a point where a major project can be executed without significant technical problems. The independent review will focus on questions related to: (1) Adequacy of development of the technical base of understanding; (2) Status of development and availability of technology among the various alternatives; (3) Status and availability of the industrial infrastructure to support project design, equipment fabrication, facility construction, and process and program/project operation; (4) Adequacy of the design effort to provide a sound foundation to support execution of project; (5) Ability of the organization to fully integrate the system, and direct, manage, and control the execution of a complex major project.

  14. Predicting tree heights for biomass estimates in tropical forests

    NASA Astrophysics Data System (ADS)

    Molto, Q.; Hérault, B.; Boreux, J.-J.; Daullet, M.; Rousteau, A.; Rossi, V.

    2013-05-01

    The recent development of REDD+ mechanisms require reliable estimation of carbon stocks, especially in tropical forests that are particularly threatened by global changes. Even if tree height is a crucial variable to compute the above-ground forest biomass, tree heights are rarely measured in large-scale forest census because it requires consequent extra-effort. Tree height have thus to be predicted thanks to height models. Height and diameter of all trees above 10 cm of diameter were measured in thirty-three half-ha plots and nine one-ha plots throughout the northern French Guiana, an area with substantial climate and environmental gradients. We compared four different model shapes and found that the Michaelis-Menten shape was the most appropriate for the tree biomass prediction. Model parameters values were significantly different from one forest plot to another and neglecting these differences would lead to large errors in biomass estimates. Variables from the forest stand structure explained a sufficient part of the plot-to-plot variations of the height model parameters to affect the AGB predictions. In the forest stands dominated by small trees, the trees were found to have rapid height growth for small diameters. In forest stands dominated by larger trees, the trees were found to have the greatest heights for large diameters. The above-ground biomass estimation uncertainty of the forest plots was reduced by the use of the forest structure-based height model. It demonstrates the feasibility and the importance of height modeling in tropical forest for carbon mapping. Tree height is definitely an important variable for AGB estimations. When the tree heights are not measured in an inventory, they can be predicted with a height-diameter model. This model can account for plot-to plot variations in height-diameter relationship thank to variables describing the plots. The variables describing the stand structure of the plots are efficient for this. We found that

  15. The value of male height in the marriage market.

    PubMed

    Sohn, Kitae

    2015-07-01

    Analyzing the Indonesian Family Life Survey 2007, this paper estimates the value of relative height (relative to the spouse's height) in the marriage market of a developing country. The results indicate that the value of a 1cm reduction in the husband's height relative to his wife's height is about 3% of his earnings. 3% of the mean of yearly earnings amounts to Rp. 492,000 or US$54 in 2007. That value is reduced to 1% when earnings-generating attributes are controlled for. This difference of 2% points can be considered the value that women attach to their husbands' earnings-generating attributes; meanwhile, the remaining 1% suggests that there are still other attributes that women look for in male height.

  16. Representation of videokeratoscopic height data with Zernike polynomials

    NASA Astrophysics Data System (ADS)

    Schwiegerling, Jim; Greivenkamp, John E.; Miller, Joseph M.

    1995-10-01

    Videokeratoscopic data are generally displayed as a color-coded map of corneal refractive power, corneal curvature, or surface height. Although the merits of the refractive power and curvature methods have been extensively debated, the display of corneal surface height demands further investigation. A significant drawback to viewing corneal surface height is that the spherical and cylindrical components of the cornea obscure small variations in the surface. To overcome this drawback, a methodology for decomposing corneal height data into a unique set of Zernike polynomials is presented. Repeatedly removing the low-order Zernike terms reveals the hidden height variations. Examples of the decomposition-and-display technique are shown for cases of astigmatism, keratoconus, and radial keratotomy. Copyright (c) 1995 Optical Society of America

  17. Mapping dynamic QTL for plant height in triticale

    PubMed Central

    2014-01-01

    Background Plant height is a prime example of a dynamic trait that changes constantly throughout adult development. In this study we utilised a large triticale mapping population, comprising 647 doubled haploid lines derived from 4 families, to phenotype for plant height by a precision phenotyping platform at multiple time points. Results Using multiple-line cross QTL mapping we identified main effect and epistatic QTL for plant height for each of the time points. Interestingly, some QTL were detected at all time points whereas others were specific to particular developmental stages. Furthermore, the contribution of the QTL to the genotypic variance of plant height also varied with time as exemplified by a major QTL identified on chromosome 6A. Conclusions Taken together, our results in the small grain cereal triticale reveal the importance of considering temporal genetic patterns in the regulation of complex traits such as plant height. PMID:24885543

  18. A Tracer Test at the Los Alamos Canyon Weir

    NASA Astrophysics Data System (ADS)

    Levitt, D. G.; Stone, W. J.; Newell, D. L.; Wykoff, D. S.

    2002-12-01

    A low-head weir was constructed in the Los Alamos Canyon to reduce the transport of contaminant-bearing sediment caused by fire-enhanced runoff off Los Alamos National Laboratory (LANL) property towards the Rio Grande following the May 2000 Cerro Grande fire at Los Alamos, New Mexico. Fractured basalt was exposed in the channel by grading during construction of the weir, and water temporarily ponds behind the weir following periods of runoff. In order to monitor any downward transport of contaminants into fractured basalt, and potentially downward to the regional ground water, three boreholes (one vertical, one at 43 degrees, and one at 34 degrees from horizontal) were installed for environmental monitoring. The boreholes penetrate to depths ranging from approximately 9 to 82 m below the weir floor. The two angled boreholes are fitted with flexible FLUTe liners with resistance sensors to measure relative moisture content and absorbent sampling pads for contaminant and environmental tracer sampling within the vadose zone. The two angled boreholes are also monitored for relative changes in moisture content by neutron logging. The vertical borehole penetrates three perched water zones and is equipped with four screens and sampling ports. In April 2002, a tracer test was initiated with the application of a 0.2 M (16,000 ppm) solution of potassium bromide (KBr) onto the weir floor. The tracer experiment was intended to provide data on travel times through the complex hydrogeologic media of fractured basalt. A precipitation and runoff event in June 2002 resulted in approximately 0.61 m of standing water behind the weir. If the KBr and flood waters were well mixed, the concentration of KBr in the flood waters was approximately 24 ppm. Bromide was detected in the absorbent membrane in the 43 degree hole at concentrations up to 2 ppm. Resistance sensors in the 43 degree borehole detected moisture increases within 3 days at a depth of 27 m, indicating an average wetting

  19. The Los Alamos Science Pillars The Science of Signatures

    SciTech Connect

    Smith, Joshua E.; Peterson, Eugene J.

    2012-09-13

    As a national security science laboratory, Los Alamos is often asked to detect and measure the characteristics of complex systems and to use the resulting information to quantify the system's behavior. The Science of Signatures (SoS) pillar is the broad suite of technical expertise and capability that we use to accomplish this task. With it, we discover new signatures, develop new methods for detecting or measuring signatures, and deploy new detection technologies. The breadth of work at Los Alamos National Laboratory (LANL) in SoS is impressive and spans from the initial understanding of nuclear weapon performance during the Manhattan Project, to unraveling the human genome, to deploying laser spectroscopy instrumentation on Mars. Clearly, SoS is a primary science area for the Laboratory and we foresee that as it matures, new regimes of signatures will be discovered and new ways of extracting information from existing data streams will be developed. These advances will in turn drive the development of sensing instrumentation and sensor deployment. The Science of Signatures is one of three science pillars championed by the Laboratory and vital to supporting our status as a leading national security science laboratory. As with the other two pillars, Materials for the Future and Information Science and Technology for Predictive Science (IS&T), SoS relies on the integration of technical disciplines and the multidisciplinary science and engineering that is our hallmark to tackle the most difficult national security challenges. Over nine months in 2011 and 2012, a team of science leaders from across the Laboratory has worked to develop a SoS strategy that positions us for the future. The crafting of this strategy has been championed by the Chemistry, Life, and Earth Sciences Directorate, but as you will see from this document, SoS is truly an Institution-wide effort and it has engagement from every organization at the Laboratory. This process tapped the insight and

  20. Measuring the accuracy of self-reported height and weight in a community-based sample of young people

    PubMed Central

    2012-01-01

    Background Self-reported anthropometric data are commonly used to estimate prevalence of obesity in population and community-based studies. We aim to: 1) Determine whether survey participants are able and willing to self-report height and weight; 2) Assess the accuracy of self-reported compared to measured anthropometric data in a community-based sample of young people. Methods Participants (16–29 years) of a behaviour survey, recruited at a Melbourne music festival (January 2011), were asked to self-report height and weight; researchers independently weighed and measured a sub-sample. Body Mass Index was calculated and overweight/obesity classified as ≥25kg/m2. Differences between measured and self-reported values were assessed using paired t-test/Wilcoxon signed ranks test. Accurate report of height and weight were defined as <2cm and <2kg difference between self-report and measured values, respectively. Agreement between classification of overweight/obesity by self-report and measured values was assessed using McNemar’s test. Results Of 1405 survey participants, 82% of males and 72% of females self-reported their height and weight. Among 67 participants who were also independently measured, self-reported height and weight were significantly less than measured height (p=0.01) and weight (p<0.01) among females, but no differences were detected among males. Overall, 52% accurately self-reported height, 30% under-reported, and 18% over-reported; 34% accurately self-reported weight, 52% under-reported and 13% over-reported. More females (70%) than males (35%) under-reported weight (p=0.01). Prevalence of overweight/obesity was 33% based on self-report data and 39% based on measured data (p=0.16). Conclusions Self-reported measurements may underestimate weight but accurately identified overweight/obesity in the majority of this sample of young people. PMID:23170838

  1. Geothermal investigation of spring and well waters of the Los Alamos Region, New Mexico

    SciTech Connect

    Goff, F.E.; Sayer, S.

    1980-04-01

    The chemical and isotopic characters of 20 springs and wells in the Los Alamos area were investigated for indications of geothermal potential. These waters were compared with known hot and mineral springs from adjacent Valles Caldera and San Ysidro. All waters in the Los Alamos area are composed of meteoric water. Isotopic data show that the two primary aquifers beneath the Los Alamos region have different recharge areas. Relatively high concentrations of lithium, arsenic, chlorine, boron, and fluorine in some of the Los Alamos wells suggest these waters may contain a small fraction of thermal/mineral water of deep origin. Thermal water probably rises up high-angle faults associated with a graben of the Rio Grande rift now buried by the Pajarito Plateau.

  2. Los Alamos National Laboratory Science Education Programs. Quarterly progress report, April 1--June 30, 1995

    SciTech Connect

    Gill, D.

    1995-09-01

    This report is quarterly progress report on the Los Alamos National Laboratory Science Education Programs. Included in the report are dicussions on teacher and faculty enhancement, curriculum improvement, student support, educational technology, and institutional improvement.

  3. Power beam technology at Los Alamos/A review of research and development activities

    SciTech Connect

    Casey, H.

    1990-01-01

    This document discusses techniques and research programs in power beam welding at Los Alamos National Laboratories. Specific areas discussed are in plasma welding, electron beam welding and laser welding. 11 refs., 9 figs. (FSD)

  4. Sensitivity of the urban airshed model to mixing height profiles

    SciTech Connect

    Rao, S.T.; Sistla, G.; Ku, J.Y.; Zhou, N.; Hao, W.

    1994-12-31

    The United States Environmental Protection Agency (USEPA) has recommended the use of the Urban Airshed Model (UAM), a grid-based photochemical model, for regulatory applications. One of the important parameters in applications of the UAM is the height of the mixed layer or the diffusion break. In this study, we examine the sensitivity of the UAM-predicted ozone concentrations to (a) a spatially invariant diurnal mixing height profile, and (b) a spatially varying diurnal mixing height profile for a high ozone episode of July 1988 for the New York Airshed. The 1985/88 emissions inventory used in the EPA`s Regional Oxidant Modeling simulations has been regridded for this study. Preliminary results suggest that the spatially varying case yields a higher peak ozone concentrations compared to the spatially invariant mixing height simulation, with differences in the peak ozone ranging from a few ppb to about 40 ppb for the days simulated. These differences are attributed to the differences in the shape of the mixing height profiles and its rate of growth during the morning hours when peak emissions are injected into the atmosphere. Examination of the impact of emissions reductions associated with these two mixing height profiles indicates that NO{sub x}-focussed controls provide a greater change in the predicted ozone peak under spatially invariant mixing heights than under the spatially varying mixing height profile. On the other hand, VOC-focussed controls provide a greater change in the predicted peak ozone levels under spatially varying mixing heights than under the spatially invariant mixing height profile.

  5. SRTM Data Release for Africa, Colored Height

    NASA Technical Reports Server (NTRS)

    2004-01-01

    central latitudes of Africa is dominated by the Great Rift Valley, extending from Lake Nyasa to the Red Sea, and splitting into two arms to enclose an interior plateau and the nearly circular Lake Victoria, visible in the right center of the image. To the west lies the Congo Basin, a vast, shallow depression which rises to form an almost circular rim of highlands.

    Most of the southern part of the continent rests on a concave plateau comprising the Kalahari basin and a mountainous fringe, skirted by a coastal plain which widens out in Mozambique in the southeast.

    Many of these regions were previously very poorly mapped due to persistent cloud cover or the inaccessibility of the terrain. Digital elevation data, such as provided by SRTM, are particularly in high demand by scientists studying earthquakes, volcanism, and erosion patterns for use in mapping and modeling hazards to human habitation. But the shape of Earth's surface affects nearly every natural process and human endeavor that occurs there, so elevation data are used in a wide range of applications.

    In this index map color-coding is directly related to topographic height, with brown and yellow at the lower elevations, rising through green, to white at the highest elevations. Blue areas on the map represent water within the mapped tiles, each of which includes shorelines or islands.

    Elevation data used in this image were acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a

  6. SRTM Data Release for Africa, Colored Height

    NASA Technical Reports Server (NTRS)

    2004-01-01

    central latitudes of Africa is dominated by the Great Rift Valley, extending from Lake Nyasa to the Red Sea, and splitting into two arms to enclose an interior plateau and the nearly circular Lake Victoria, visible in the right center of the image. To the west lies the Congo Basin, a vast, shallow depression which rises to form an almost circular rim of highlands.

    Most of the southern part of the continent rests on a concave plateau comprising the Kalahari basin and a mountainous fringe, skirted by a coastal plain which widens out in Mozambique in the southeast.

    Many of these regions were previously very poorly mapped due to persistent cloud cover or the inaccessibility of the terrain. Digital elevation data, such as provided by SRTM, are particularly in high demand by scientists studying earthquakes, volcanism, and erosion patterns for use in mapping and modeling hazards to human habitation. But the shape of Earth's surface affects nearly every natural process and human endeavor that occurs there, so elevation data are used in a wide range of applications.

    In this index map color-coding is directly related to topographic height, with brown and yellow at the lower elevations, rising through green, to white at the highest elevations. Blue areas on the map represent water within the mapped tiles, each of which includes shorelines or islands.

    Elevation data used in this image were acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a

  7. Small Mammal Sampling in Mortandad and Los Alamos Canyons, 2005

    SciTech Connect

    Bennett, Kathy; Sherwood, Sherri; Robinson, Rhonda

    2006-08-15

    As part of an ongoing ecological field investigation at Los Alamos National Laboratory, a study was conducted that compared measured contaminant concentrations in sediment to population parameters for small mammals in the Mortandad Canyon watershed. Mortandad Canyon and its tributary canyons have received contaminants from multiple solid waste management units and areas of concern since establishment of the Laboratory in the 1940s. The study included three reaches within Effluent and Mortandad canyons (E-1W, M-2W, and M-3) that had a spread in the concentrations of metals and radionuclides and included locations where polychlorinated biphenyls and perchlorate had been detected. A reference location, reach LA-BKG in upper Los Alamos Canyon, was also included in the study for comparison purposes. A small mammal study was initiated to assess whether potential adverse effects were evident in Mortandad Canyon due to the presence of contaminants, designated as contaminants of potential ecological concern, in the terrestrial media. Study sites, including the reference site, were sampled in late July/early August. Species diversity and the mean daily capture rate were the highest for E-1W reach and the lowest for the reference site. Species composition among the three reaches in Mortandad was similar with very little overlap with the reference canyon. Differences in species composition and diversity were most likely due to differences in habitat. Sex ratios, body weights, and reproductive status of small mammals were also evaluated. However, small sample sizes of some species within some sites affected the analysis. Ratios of males to females by species of each site (n = 5) were tested using a Chi-square analysis. No differences were detected. Where there was sufficient sample size, body weights of adult small mammals were compared between sites. No differences in body weights were found. Reproductive status of species appears to be similar across sites. However, sample

  8. A Journey From Sandia To Los Alamos - 12465

    SciTech Connect

    Goyal, K.K.; Humphrey, B.J.; Krause, T.J.; Gluth, J.W.; Kiefer, M.L.; Haynes, S.

    2012-07-01

    The U.S. Department of Energy (DOE) relies on laboratory experiments and computer-based models to verify the reliability of the nation's nuclear stockpile. Sandia National Laboratories/New Mexico (SNL/NM) tests various materials in extreme environments designed to mimic those of nuclear explosions using the Z machine. The Z machine is a key tool in the National Nuclear Security Administration's (NNSA) stockpile stewardship mission and is used to study the dynamic properties of nuclear weapon materials. In 2006, SNL/NM and Los Alamos National Laboratory (LANL) signed a Memorandum of Understanding (MOU) defining experiments to be conducted in the Z machine involving plutonium (Pu) provided by LANL. Five Pu experiments have been completed with as many as 20 more planned through 2016. The experimental containment vessel used for the experiment and containing the Pu residues, becomes transuranic (TRU) waste after the experiment and termination of safeguards and is considered a LANL waste stream. Each containment vessel is placed in a 55-gallon Type A drum or standard waste box (SWB) for shipment back to LANL for final certification and eventual disposal at the Waste Isolation Pilot Plant (WIPP). The experimental containment vessels are greater than 99% metallic materials (ferrous and non-ferrous metals). In addition to the Pu targets, detonators with high explosives (HE) are used in the experiments to isolate the containment vessel from the Z machine as energy is delivered to the Pu samples. The characterization requirements, transportation issues, required documentation, and the approvals needed before shipments were challenging and required close coordination between SNL/NM, Sandia Site Office, LANL, Los Alamos Site Office, Washington TRU Solutions, Inc., the Central Characterization Project, and the Carlsbad Field Office. Between 2006 and 2010, representatives from SNL/NM and LANL worked to develop an approved path forward to meet the requirements of all stakeholders

  9. 2015 Los Alamos Space Weather Summer School Research Reports

    SciTech Connect

    Cowee, Misa; Chen, Yuxi; Desai, Ravindra; Hassan, Ehab; Kalmoni, Nadine; Lin, Dong; Depascuale, Sebastian; Hughes, Randall Scott; Zhou, Hong

    2015-11-24

    The fifth Los Alamos Space Weather Summer School was held June 1st - July 24th, 2015, at Los Alamos National Laboratory (LANL). With renewed support from the Institute of Geophysics, Planetary Physics, and Signatures (IGPPS) and additional support from the National Aeronautics and Space Administration (NASA) and the Department of Energy (DOE) Office of Science, we hosted a new class of five students from various U.S. and foreign research institutions. The summer school curriculum includes a series of structured lectures as well as mentored research and practicum opportunities. Lecture topics including general and specialized topics in the field of space weather were given by a number of researchers affiliated with LANL. Students were given the opportunity to engage in research projects through a mentored practicum experience. Each student works with one or more LANL-affiliated mentors to execute a collaborative research project, typically linked with a larger ongoing research effort at LANL and/or the student’s PhD thesis research. This model provides a valuable learning experience for the student while developing the opportunity for future collaboration. This report includes a summary of the research efforts fostered and facilitated by the Space Weather Summer School. These reports should be viewed as work-in-progress as the short session typically only offers sufficient time for preliminary results. At the close of the summer school session, students present a summary of their research efforts. Titles of the papers included in this report are as follows: Full particle-in-cell (PIC) simulation of whistler wave generation, Hybrid simulations of the right-hand ion cyclotron anisotropy instability in a sub-Alfvénic plasma flow, A statistical ensemble for solar wind measurements, Observations and models of substorm injection dispersion patterns, Heavy ion effects on Kelvin-Helmholtz instability: hybrid study, Simulating plasmaspheric electron densities with a two

  10. Priorities and strategies, Los Alamos computer science institute.

    SciTech Connect

    Oldehoeft, R. R.

    2004-01-01

    On March 18-19, 2002 the Los Alamos Computer Science Institute (LACSI) Executive Committee and Principal Investigators met to discuss methods of addressing issues raised in the 2001 LACSI Contract Review. The body was tasked to develop priorities and strategies to meet future programmatic and LANL computer science needs. A framework was developed to address long-term strategic thrust areas. Specific objectives were called out as near-term priorities. The objectives were folded into the framework to form a coherent planning view. On both April 8-9, 2003 and February 19-20, 2004, the LACSI Executive Committee and Principal Investigators met with senior LANL personnel to revise the framework, priorities, and strategies established at the planning meeting in 2002. The current framework outlines five strategic thrust areas: Components, Systems, Computational Science, Application and System Performance, and Computer Science Community Interaction. This document presents the research vision and implementation strategy in each of these areas. The goal of the component architectures effort is to make application development easier through the use of modular codes that integrate powerful components at a high level of abstraction. Through modularization and the existence of well-defined component boundaries (specified by programming interfaces), components allow scientists and software developers to focus on a their own areas of expertise. For example, components and modern scripting languages enable physicists to program at a high level of abstraction (by composing off-the-shelf components into an application), leaving the development of components to expert programmers. In addition, because components foster a higher level of code reuse, components provide an increased economy of scale, making it possible for resources to be shifted to areas such as performance, testing, and platform dependencies, thus improving software quality, portability, and application performance. A

  11. Independence and Survival.

    ERIC Educational Resources Information Center

    James, H. Thomas

    Independent schools that are of viable size, well managed, and strategically located to meet competition will survive and prosper past the current financial crisis. We live in a complex technological society with insatiable demands for knowledgeable people to keep it running. The future will be marked by the orderly selection of qualified people,…

  12. Independence, Disengagement, and Discipline

    ERIC Educational Resources Information Center

    Rubin, Ron

    2012-01-01

    School disengagement is linked to a lack of opportunities for students to fulfill their needs for independence and self-determination. Young people have little say about what, when, where, and how they will learn, the criteria used to assess their success, and the content of school and classroom rules. Traditional behavior management discourages…

  13. Caring about Independent Lives

    ERIC Educational Resources Information Center

    Christensen, Karen

    2010-01-01

    With the rhetoric of independence, new cash for care systems were introduced in many developed welfare states at the end of the 20th century. These systems allow local authorities to pay people who are eligible for community care services directly, to enable them to employ their own careworkers. Despite the obvious importance of the careworker's…

  14. Postcard from Independence, Mo.

    ERIC Educational Resources Information Center

    Archer, Jeff

    2004-01-01

    This article reports results showing that the Independence, Missori school district failed to meet almost every one of its improvement goals under the No Child Left Behind Act. The state accreditation system stresses improvement over past scores, while the federal law demands specified amounts of annual progress toward the ultimate goal of 100…

  15. Independent School Governance.

    ERIC Educational Resources Information Center

    Beavis, Allan K.

    Findings of a study that examined the role of the governing body in the independent school's self-renewing processes are presented in this paper. From the holistic paradigm, the school is viewed as a self-renewing system that is able to maintain its identity despite environmental changes through existing structures that define and create…

  16. Shaded relief, color as height, Fiji

    NASA Technical Reports Server (NTRS)

    2000-01-01

    The Sovereign Democratic Republic of the Fiji Islands, commonly known as Fiji, is an independent nation consisting of some 332 islands surrounding the Koro Sea in the South Pacific Ocean. This topographic image shows Viti Levu, the largest island in the group. With an area of 10,429 square kilometers (about 4000 square miles), it comprises more than half the area of the Fiji Islands. Suva, the capital city, lies on the southeast shore. The Nakauvadra, the rugged mountain range running from north to south, has several peaks rising above 900 meters (about 3000 feet). Mount Tomanivi, in the upper center, is the highest peak at 1324 meters (4341 feet). The distinct circular feature on the north shore is the Tavua Caldera, the remnant of a large shield volcano that was active about 4 million years ago. Gold has been mined on the margin of the caldera since the 1930's. The Nadrau plateau is the low relief highland in the center of the mountain range. The coastal plains in the west, northwest and southeast account for only 15 percent of Viti Levu's area but are the main centers of agriculture and settlement.

    This shaded relief image was generated using topographic data from the Shuttle Radar Topography Mission. A computer-generated artificial light source illuminates the elevation data to produce a pattern of light and shadows. Slopes facing the light appear bright, while those facing away are shaded. On flatter surfaces, the pattern of light and shadows can reveal subtle features in the terrain. Colors show the elevation as measured by SRTM. Colors range from green at the lowest elevations top ink at the highest elevations. This image contains about 1300 meters(4300 feet) of total relief.

    The Shuttle Radar Topography Mission (SRTM), launched on February 11,2000, uses the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. The mission is designed to

  17. Building an artificial intelligence capability at Los Alamos

    SciTech Connect

    Marinuzzi, J.G.

    1988-01-01

    In 1985, after three years of preliminary work, Management of the Los Alamos National Laboratory started an ambitious program to develop a strong technical capability in the rapidly emerging field of Artificial Intelligence/Knowledge Based Systems (AI/KBS). When this AI development program began, except for a few staff members doing basic AI research, AI was essentially nonexistent at the laboratory. The basics, including such things as AI computer hardware and software, literature, books, knowledgeable personnel, or even a general knowledge of what AI was, were most difficult if not impossible to find. For this reason, we had to approach the problem with a very broad perspective, which strongly addressed the basics while aiming toward more advanced AI program elements. Broad, intensive education was the ''bootstrapping'' tool used in this five year, multi-million dollar AI capability development program. Halfway through the program, our accomplishments indicate that the program is extremely successful. In terms of trained staff, active programs and ''state-of-the-art equipment,'' we have developed one of the strongest AI technical capabilities within the Department of Energy (DOE) and the Department of Defense(DOD). However, a great deal more must be done before the full potential of the program can be realized. 1 fig.

  18. Progress on the Los Alamos heavy-ion injector

    SciTech Connect

    Wilson, D.C.; Riepe, K.B.; Ballard, E.O.; Meyer, E.A.; Shurter, R.P.; Van Haaften, F.W.; Humphries, S. Jr.

    1986-01-01

    Heavy-ion fusion using an induction linac requires injection of multiple high-current beams from a pulsed electrostatic accelerator at as high a voltage as practical. Los Alamos National Laboratory is developing a 16-beam, 2-MeV, pulsed electrostatic accelerator for Al/sup +/ ions. The ion source will use a pulsed metal vapor arc plasma. A biased grid will control plasma flux into the ion extraction region. This source has achieved a normalized emittance of epsilon/sub n/ < 3.10/sup -7/..pi..-m-rad with Al/sup +/ ions. An 800 kV Marx prototype with a laser fired diverter is being assembled. The ceramic accelerating column sections have been brazed and leak tested. Voltage hold off on a brazed sample was more than doubled by selective removal of the Ticusil braze fillet extending along the ceramic. A scaled test module held 250 kV for 50 ..mu..s, giving confidence that the full module can hold 175 kV per section. The pressure vessel should be received in June 1986. High-voltage testing of a 1 MV column will begin by early 1987.

  19. Response of `Alamo` switchgrass (Panicum virgatum) to weed management practices

    SciTech Connect

    Sledge, S.L.; Walker, R.H.

    1995-11-01

    Field studies were conducted in 1992 and 1994 to evaluate herbicides that would provide weed control and biomass yield of `Alamo` switchgrass during the year of establishment. For grass weed control, bensulide was applied preplant incorporated (PPI) at 4.4 kg ai ha{sup -1}, while MSMA was applied postemergence over the top (POST) at 2.2 kg ai ha{sup -1} to switchgrass that had two to four leaves. Herbicides applied POST for control of broadleaf weed species included 2,4-D at 0.6 kg ai ha{sup -1} or metsulfuron at 0.02 kg ai ha{sup -1}. Herbicide treatments included bensulide and MSMA applied alone or in combination with s,3-D or metsulfuron. They were arranged in a randomized complete block design and replicated four times. Weed control, crop tolerance and yield data were taken over time. Bensulide or MSMA applied alone provided 80% or greater control of large crabgrass, broadleaf signalgrass and fall panicum for the two years. The addition of metsulfuron or 2,4-D provided acceptable control of smooth pigweed, prickly sida, pitted morningglory and sicklepod. MSMA treatments produced slight PANVI injury that ranged from 20 to 36%. Bensulide injury was mostly moderate ranging from 19 to 88%. Although less injury was recorded with MSMA treatments, bensulide treatments trended higher for establishment-year biomass production that averaged 5123 kg ha{sup -1} as compared to 4239 kg ha{sup -1} for MSMA treatments.

  20. Electron clearing in the Los Alamos Proton Storage Ring

    SciTech Connect

    Plum, M.A.; Allen, J.; Borden, M.J.; Fitzgerald, D.H.; Macek, R.J.; Wang, T.S.

    1995-05-01

    The instability observed in the Los Alamos Proton Storage Ring (PSR) has been tentatively identified as an electron-proton instability. A source of electrons must exist for this instability to occur. The PSR injection section contains the stripper foil, and therefore provides several strong sources of electrons. An electron clearing system was installed in the injection section to clear out these electrons. The system comprised: (1) a foil biasing system to clear the SEM and thermionic electrons, (2) a pair of low-field bending magnets with a Faraday cup to clear the convoy electrons, and (3) two pairs of clearing electrodes, one upstream and one downstream of the stripper foil, to clear the remaining electrons. This paper discusses the design and performance of the Electron Clearing System, and its effect on the instability. Also presented are some results from other charge-collection experiments that suggest there is also substantial electron production in parts of the ring other than the injection section.