Science.gov

Sample records for alamos icf program

  1. 1996 ICF program overview

    SciTech Connect

    Correll, D

    1996-09-30

    The continuing objective of the Inertial Confinement Fusion (ICF) Program is the demonstration of thermonuclear fusion ignition and energy gain in the laboratory. The underlying theme of all ICF activities as a science research and development program is the Department of Energy's (DOE's) Defense Programs (DP) science-based Stockpile Stewardship and Management (SSM) Program. The extension of current program research capabilities in the National Ignition Facility (NIF) is necessary for the ICF Program to satisfy its stewardship responsibilities. ICF resources (people and facilities) are increasingly being redirected in support of the performance, schedule, and cost goals of the NIF. One of the more important aspects of ICF research is the national nature of the program. Lawrence Livermore National Laboratory's (LLNL's) ICF Program falls within DOE's national ICF Program, which includes the Nova and Beamlet laser facilities at LLNL and the OMEGA, Nike, and Trident laser facilities at the University of Rochester (Laboratory for Laser Energetics, UR/LLE), the Naval Research Laboratory (NRL), and Los Alamos National Laboratory (LANL), respectively. The Particle Beam Fusion Accelerator (PBFA) and Saturn pulsed-power facilities are at Sandia National Laboratories (SNL). General Atomics, Inc. (GA) develops and provides many of the targets for the above experimental facilities. LLNL's ICF Program supports activities in two major interrelated areas: (1) target physics and technology (experimental, theoretical, and computational research); and (2) laser science and optics technology development. Experiments on LLNL's Nova laser primarily support ignition and weapons physics research. Experiments on LLNL's Beamlet laser support laser science and optics technology development. In addition, ICF sciences and technologies, developed as part of the DP mission goals, continue to support additional DOE objectives. These objectives are (1) to achieve diversity in energy sources

  2. Los Alamos Programming Models

    SciTech Connect

    Bergen, Benjamin Karl

    2016-07-07

    This is the PDF of a powerpoint presentation from a teleconference on Los Alamos programming models. It starts by listing their assumptions for the programming models and then details a hierarchical programming model at the System Level and Node Level. Then it details how to map this to their internal nomenclature. Finally, a list is given of what they are currently doing in this regard.

  3. Mercury: The Los Alamos ICF KrF laser system

    SciTech Connect

    Czuchlewski, S.J.; York, G.W.; Bigio, I.J.; Brucker, J.; Hanson, D.; Honig, E.M.; Kurnit, N.; Leland, W.; McCown, A.W.; McLeod, J.; Rose, E.; Thomas, S.; Thompson, D.

    1993-01-19

    The Mercury KrF laser facility at Los Alamos is being built with the benefit of lessons learned from the Aurora system. An increased understanding of KrF laser engineering, and the designed implementation of system flexibility, will permit Mercury to serve as a tested for a variety of advanced KrF technology concepts.

  4. Recent progress in the Los Alamos KrF Program

    SciTech Connect

    McDonald, T.E.; Cartwright, D.C.; Coggeshall, S.V.; Fenstermacher, C.A.; Figueira, J.F.; Foreman, L.R.; Goldstone, P.D.; Hanson, D.E.; Harris, D.B.; Hauer, A.A.

    1988-01-01

    The goal of the Inertial Confinement Fusion Program (ICF) is to develop the ability to ignite and burn small masses of thermonuclear fuel. Although the present near-term objectives of the program are directed toward defense applications, ICF research continues to be carried out with a view to the longer term goal of commercial power production. The characteristics of a KrF laser make it an attractive candidate as an ICF driver. The KrF wavelength of 248 nm provides a target coupling that is very high at intensities of 10/sup 14/w/cm/sup 2/. In addition, the KrF laser can be repetitively operated at frequencies appropriate for a power reactor and has an intrinsically high efficiency, which allows projections to the long-term goal of energy production. The ICF program at Los Alamos consists of driver development, target design and fabrication, and target experimentation. The major effort at present is the investigation and development of KrF technology to determine its applicability for use in a laboratory driver at Los Alamos. Such a driver would be used in defense related technology studies and in areas of scientific study such as highly ionized materials and high-energy-density physics.

  5. ICF Program: LDRD-ER Final Report

    SciTech Connect

    Glenzer, S H

    2004-02-05

    In the 01-ERD-107 LDRD-ER project, we have performed novel Thomson scattering experiments at the Trident and Omega laser facilities and provided high quality spectral data. These results have led to the development of the first quantitative understanding of laser-plasma interactions for NIF plasmas. For this purpose an green/ultraviolet probe laser, built for Nova in 1998 [1] and successfully used to measure both temperature and plasma wave amplitudes [2], has been deployed on Omega. The Thomson scattering diagnostics has been used twofold: (1) it provided independent measurements of the plasma electron and ion temperature, the plasma flow velocity, or the electron distribution function; (2) it provided measurements of the primary plasma wave and their secondary non-linear decay wave products. These experiments at Omega provide definitive quantitative results on the nonlinear saturation of stimulated Raman scattering for green (2{omega}) beams. In addition, the experiments on the Trident laser have led to a quantitative understanding of the stimulated Brillouin scattering in low-Z plasmas. A nonlinear frequency detuning model has successfully explained all the experimental observable including the SBS reflectivity. This model has been implemented into the laser-plasma interaction code pF3D as a tool to design and optimize NIF target experiments with SBS and SRS losses included. The development of quantitative models for SBS and SRS for various regimes has now been adopted as part of the WBS1 project within the ICF program.

  6. An Overview of the Los Alamos Inertial Confinement Fusion and High-Energy-Density Physics Research Programs

    SciTech Connect

    Batha, Steven H.

    2016-07-15

    The Los Alamos Inertial Confinement Fusion and Science Programs engage in a vigorous array of experiments, theory, and modeling. We use the three major High Energy Density facilities, NIF, Omega, and Z to perform experiments. These include opacity, radiation transport, hydrodynamics, ignition science, and burn experiments to aid the ICF and Science campaigns in reaching their stewardship goals. The ICF program operates two nuclear diagnostics at NIF, the neutron imaging system and the gamma reaction history instruments. Both systems are being expanded with significant capability enhancements.

  7. Los Alamos National Laboratory Waste Management Program

    SciTech Connect

    Lopez-Escobedo, G.M.; Hargis, K.M.; Douglass, C.R.

    2007-07-01

    Los Alamos National Laboratory's (LANL) waste management program is responsible for disposition of waste generated by many of the LANL programs and operations. LANL generates liquid and solid waste that can include radioactive, hazardous, and other constituents. Where practical, LANL hazardous and mixed wastes are disposed through commercial vendors; low-level radioactive waste (LLW) and radioactive asbestos-contaminated waste are disposed on site at LANL's Area G disposal cells, transuranic (TRU) waste is disposed at the Waste Isolation Pilot Plant (WIPP), and high-activity mixed wastes are disposed at the Nevada Test Site (NTS) after treatment by commercial vendors. An on-site radioactive liquid waste treatment facility (RLWTF) removes the radioactive constituents from liquid wastes and treated water is released through an NPDES permitted outfall. LANL has a very successful waste minimization program. Routine hazardous waste generation has been reduced over 90% since 1993. LANL has a DOE Order 450.1-compliant environmental management system (EMS) that is ISO 14001 certified; waste minimization is integral to setting annual EMS improvement objectives. Looking forward, under the new LANL management and operating contractor, Los Alamos National Security (LANS) LLC, a Zero Liquid Discharge initiative is being planned that should eliminate flow to the RLWTF NPDES-permitted outfall. The new contractor is also taking action to reduce the number of permitted waste storage areas, to charge generating programs directly for the cost to disposition waste, and to simplify/streamline the waste system. (authors)

  8. Environmental Programs at Los Alamos National Laboratory

    SciTech Connect

    Jones, Patricia

    2012-07-11

    Summary of this project is: (1) Teamwork, partnering to meet goals - (a) Building on cleanup successes, (b) Solving legacy waste problems, (c) Protecting the area's environment; (2) Strong performance over the past three years - (a) Credibility from four successful Recovery Act Projects, (b) Met all Consent Order milestones, (c) Successful ramp-up of TRU program; (3) Partnership between the National Nuclear Security Administration's Los Alamos Site Office, DOE Carlsbad Field Office, New Mexico Environment Department, and contractor staff enables unprecedented cleanup progress; (4) Continued focus on protecting water resources; and (5) All consent order commitments delivered on time or ahead of schedule.

  9. Biological assessment for the effluent reduction program, Los Alamos National Laboratory, Los Alamos, New Mexico

    SciTech Connect

    Cross, S.P.

    1996-08-01

    This report describes the biological assessment for the effluent recution program proposed to occur within the boundaries of Los Alamos National Laboratory. Potential effects on wetland plants and on threatened and endangered species are discussed, along with a detailed description of the individual outfalls resulting from the effluent reduction program.

  10. The US ICF Ignition Program and the Inertial Fusion Program

    SciTech Connect

    Lindl, J D; Hammel, B A; Logan, B G; Meyerhofer, D D; Payne, S A; Stehian, J D

    2003-07-02

    There has been rapid progress in inertial fusion in the past few years. This progress spans the construction of ignition facilities, a wide range of target concepts, and the pursuit of integrated programs to develop fusion energy using lasers, ion beams and z-pinches. Two ignition facilities are under construction (NIF in the U.S. and LMJ in France) and both projects are progressing toward an initial experimental capability. The LIL prototype beamline for LMJ and the first 4 beams of NIF will be available for experiments in 2003. The full 192 beam capability of NIF will be available in 2009 and ignition experiments are expected to begin shortly after that time. There is steady progress in the target science and target fabrication in preparation for indirect drive ignition experiments on NIF. Advanced target designs may lead to 5-10 times more yield than initial target designs. There has also been excellent progress on the science of ion beam and z-pinch driven indirect drive targets. Excellent progress on direct-drive targets has been obtained on the Omega laser at the University of Rochester. This includes improved performance of targets with a pulse shape predicted to result in reduced hydrodynamic instability. Rochester has also obtained encouraging results from initial cryogenic implosions. There is widespread interest in the science of fast ignition because of its potential for achieving higher target gain with lower driver energy and relaxed target fabrication requirements. Researchers from Osaka have achieved outstanding implosion and heating results from the Gekko XII Petawatt facility and implosions suitable for fast ignition have been tested on the Omega laser. A broad based program to develop lasers and ions beams for IFE is under way with excellent progress in drivers, chambers, target fabrication and target injection. KrF and Diode Pumped Solid-State lasers (DPSSL) are being developed in conjunction with drywall chambers and direct drive targets

  11. The Laser Safety Program at Los Alamos National Laboratory

    SciTech Connect

    Hyer, R.

    1997-02-01

    The Laser Safety Program at the Los Alamos National Laboratory was formalized in April, 1991, with the publication of a document, {open_quotes}Lasers,{close_quotes} modeled on the ANSIZ136.1 standard. This program has received such wide acceptance by the laser community and line managers that the original Laser Safety Program document has become a Laboratory standard on lasers. As a benchmark of the success of this program is that the Laboratory has experienced no disabling eye injuries because of laser operations since July, 1990, to be compared with a disabling laser eye injury that used to average one every eighteen months prior to the time the formal program was established. The Laboratory Laser Safety Program and program elements will be presented and discussed.

  12. Los Alamos safeguards program overview and NDA in safeguards

    SciTech Connect

    Keepin, G.R.

    1988-01-01

    Over the years the Los Alamos safeguards program has developed, tested, and implemented a broad range of passive and active nondestructive analysis (NDA) instruments (based on gamma and x-ray detection and neutron counting) that are now widely employed in safeguarding nuclear materials of all forms. Here very briefly, the major categories of gamma ray and neutron based NDA techniques, give some representative examples of NDA instruments currently in use, and cite a few notable instances of state-of-the-art NDA technique development. Historical aspects and a broad overview of the safeguards program are also presented.

  13. Progress in development of low density polymer foams for the ICF Program

    SciTech Connect

    Letts, S.A.; Lucht, L.M.; Morgan, R.J.; Cook, R.C.; Tillotson, T.M.; Mercer, M.B.; Miller, D.E.

    1985-06-10

    This report describes the status of CH foam development with densities of 50 mg/ccs and cell sizes of 1 ..mu..m for the ICF Program. Two approaches that both involve polymer phase separation are being investigated. The first involves a gelation-crystallization of high molecular weight polyethylene from solution, whereas the second approach involves the modification of the phase separation morphology of water-styrene emulsions by molecularly-tailored surfactants followed by polymerization of the continuous styrene phase.

  14. Site support program plan for ICF Kaiser Hanford Company

    SciTech Connect

    Dieterle, S.E.

    1996-09-27

    The Fiscal Year (FY) 1997 Inftastructure Program Site Support Program Plan (SSPP) addresses the mission objectives, workscope, work breakdown structures (WBS), management approach, and resource requirements for the Infrastructure Program. Attached to the plan are appendices that provide more detailed information associated with scope definition.

  15. Identification of relevant ICF categories for indication, intervention planning and evaluation of health resort programs: a Delphi exercise

    NASA Astrophysics Data System (ADS)

    Morita, E.; Weigl, M.; Schuh, A.; Stucki, G.

    2006-01-01

    Health resort programs have a long tradition, mainly in European countries and Japan. They rely on local resources and the physical environment, physical medicine interventions and traditional medicine to optimise functioning and health. Arguably because of the long tradition, there is only a limited number of high-quality studies that examine the effectiveness of health resort programs. Specific challenges to the evaluation of health resort programs are to randomise the holistic approach with a varying number of specific interventions but also the reliance on the effect of the physical environment. Reference standards for the planning and reporting of health resort studies would be highly beneficial. With the International Classification of Functioning Disability and Health (ICF), we now have such a standard that allows us to describe body functions and structures, activities and participation and interaction with environmental factors. A major challenge when applying the ICF in practice is its length. Therefore, the objective of this project was to identify the ICF categories most relevant for health resort programs. We conducted a consensus-building, three-round, e-mail survey using the Delphi technique. Based on the consensus of the experts, it was possible to come up with an ICF Core Set that can serve as reference standards for the indication, intervention planning and evaluation of health resort programs. This preliminary ICF Core Set should be tested in different regions and in subsets of health resort visitors with varying conditions.

  16. Los Alamos National Laboratory Science Education Programs. Quarterly progress report, April 1--June 30, 1995

    SciTech Connect

    Gill, D.

    1995-09-01

    This report is quarterly progress report on the Los Alamos National Laboratory Science Education Programs. Included in the report are dicussions on teacher and faculty enhancement, curriculum improvement, student support, educational technology, and institutional improvement.

  17. The Los Alamos nuclear safeguards and nonproliferation technology development program

    SciTech Connect

    Smith, H.A. Jr.; Menlove, H.O.; Reilly, T.D.; Bosler, G.E.; Hakkila, E.A.; Eccleston, G.W.

    1994-04-01

    For nearly three decades, Los Alamos National Laboratory has developed and implemented nuclear measurement technology and training in support of national and international nuclear safeguards. This paper outlines the major elements of those technologies and highlights some of the latest developments.

  18. Recent results in the Los Alamos compact torus program

    SciTech Connect

    Tuszewski, M.; Armstrong, W.T.; Barnes, C.W.

    1983-01-01

    A Compact Toroid is a toroidal magnetic-plasma-containment geometry in which no conductors or vacuum-chamber walls pass through the hole in the torus. Two types of compact toroids are studied experimentally and theoretically at Los Alamos: spheromaks that are oblate in shape and contain both toroidal and poloidal magnetic fields, and field-reversed configurations (FRC) that are very prolate and contain poloidal field only.

  19. ICF Annual Report 1997

    SciTech Connect

    Correll, D

    1998-06-01

    The continuing objective of Lawrence Livermore National Laboratory's (LLNL's) Inertial Confinement Fusion (ICF) Program is the demonstration of thermonuclear fusion ignition and energy gain in the laboratory and to support the nuclear weapons program in its use of ICF facilities. The underlying theme of all ICF activities as a science research and development program is the Department of Energy's (DOE's) Defense Programs (DP) science-based Stockpile Stewardship Program (SSP). The mission of the US Inertial Fusion Program is twofold: (1) to address high-energy-density physics issues for the SSP and (2) to develop a laboratory microfusion capability for defense and energy applications. In pursuit of this mission, the ICF Program has developed a state-of-the-art capability to investigate high-energy-density physics in the laboratory. The near-term goals pursued by the ICF Program in support of its mission are demonstrating fusion ignition in the laboratory and expanding the Program's capabilities in high-energy-density science. The National Ignition Facility (NIF) project is a cornerstone of this effort.

  20. Inertial confinement fusion (ICF) review

    SciTech Connect

    Hammer, D.; Dyson, F.; Fortson, N.; Novick, B.; Panofsky, W.; Rosenbluth, M.; Treiman, S.; York, H.

    1996-03-01

    During its 1996 winter study JASON reviewed the DOE Inertial Confinement Fusion (ICF) program. This included the National Ignition Facility (NIF) and proposed studies. The result of the review was to comment on the role of the ICF program in support of the DOE Science Based Stockpile Stewardship program.

  1. Los Alamos National Laboratory Yucca Mountain Site Characterization Project 1995 quality program status report

    SciTech Connect

    Bolivar, S.L.

    1996-07-01

    This status report summarizes the activities and accomplishments of the Los Alamos National Laboratory Yucca Mountain Site Characterization Project`s (YMP`s) quality assurance program for January 1 to September 30, 1995. The report includes major sections on program activities and trend analysis.

  2. Produce and fish sampling program of Los Alamos National Laboratory's Environmental Surveillance Group

    SciTech Connect

    Salazar, J.G.

    1984-09-01

    This report describes produce and fish sampling procedures of the Environmental Surveillance Group at the Los Alamos National Laboratory. The program monitors foodstuffs and fish for possible radioactive contamination from Laboratory operations. Data gathered in this program on radionuclide concentrations help to estimate radiation doses to Laboratory personnel and the public. 3 references, 7 figures, 2 tables.

  3. Target Diagnostic Technology Research and Development for the LLNL ICF and HED Programs

    SciTech Connect

    Bell, P; Bennett, C; Holder, J; Kimbrough, J; Landen, O; Lerche, D; Lowry, M; McDonald, J; Perry, T; Turner, B; Weber, F

    2003-08-22

    The National Ignition Facility (NIF) is under construction at LLNL for the Department of Energy Stockpile Stewardship Program. It will be used for experiments for Inertial Confinement Fusion (ICF) Ignition, High Energy Density (HED) science, and basic science. Many issues confront experimentalists who wish to design, fabricate, and install diagnostics on the NIF. To foster this process the ICF and HED programs at LLNL have formed a diagnostic research and development group to look at issues outside the charter of facility diagnostics (core diagnostics). We will present data from instrumentation and associated technology that is being developed by this group. A major portion of our instrumentation work is on improvements for readout systems. We have several efforts related to CCD device development. Work has been done in collaboration with the University of Arizona to backthin a large format CCD device (36mm{sup 2}). This work has shown good results. The device has very high quantum efficiency, low noise readout and high charge transfer efficiency. The device is being fielded in direct optical, direct x-ray and 13-15 RV electron readout applications. In addition to readout device development we have completed work on a CCD readout system. With a commercial vendor we have developed a large format, compact, Ethernet addressable CCD camera system. This system fits in shoebox size volume, is thermal electrically cooled, supports a variety of CCD devices and can be run from remote locations via TCP/IP protocol. We are also doing work to improve streak camera systems. We have coupled our large format CCD system to an MK2 Kentech streak tube. Improvements have been made to the resolution and dynamic range of the system. Similar improvements have been made to the LLNL optical streak camera systems. We will present data from the optical and x-ray streak camera work. In addition we will present data from single shot high-speed, high dynamic range data link work. In

  4. Los Alamos National Laboratory Training Capabilities (Possible Applications in the Global Initiatives for Proliferation Prevention Program)

    SciTech Connect

    Martin, Olga

    2012-06-04

    The briefing provides an overview of the training capabilities at Los Alamos National Laboratory that can be applied to nonproliferation/responsible science education at nuclear institutes in the Former Soviet Union, as part of the programmatic effort under the Global Initiatives for Proliferation Prevention program (GIPP).

  5. Site support program plan for ICF Kaiser Hanford Company, Revision 1

    SciTech Connect

    1995-10-01

    This document is the general administrative plan implemented by the Hanford Site contractor, ICF Kaiser Hanford Company. It describes the mission, administrative structure, projected staffing, to be provided by the contractor. The report breaks out the work responsibilities within the different units of the company, a baseline schedule for the different groups, and a cost summary for the different operating units.

  6. Compliance program for 40 CFR 61, Subpart H at Los Alamos National Laboratory

    SciTech Connect

    McNamara, Eric A.

    1997-01-01

    Effective on March 15, 1990, the Environmental Protection Agency established regulations controlling the emission of radionuclides to the air from Department of Energy facilities to limit the dose to the public to 10 mrem/yr. These regulations are detailed in 40 CFR 61, Subpart H, "National Emission Standards for Emissions of Radionuclides Other Than Radon from Department of Energy Facilities". Part of these regulations require the operation of sampling systems on stacks meeting certain requirements. Although Los Alamos National Laboratory has a long history of stack sampling, the systems in place at the time the regulation became effective did not meet the specific design requirements of the new regulation. In addition, certain specific program elements did not exist or were not adequately documented. The Los Alamos National Laboratory has undertaken a major effort to upgrade its compliance program to meet the requirements of USEPA. This effort involved: developing new and technically superior sampling methods and obtaining approval from the Environmental Protection Agency for their use; negotiating specific methodologies with the Environmental Protection Agency to implement certain requirements of the regulation: implementing a complete, quality assured, compliance program; and upgrading sampling systems. After several years of effort, Los Alamos National Laboratory now meets all requirements of the USEPA.

  7. Los Alamos Life Sciences Division's biomedical and environmental research programs. Progress report, January-December 1981. [Leading abstract

    SciTech Connect

    Holland, L.M.; Stafford, C.G.

    1982-10-01

    This report summarizes research and development activities of the Los Alamos Life Sciences Division's Biomedical and Environmental Research program for the calendar year 1981. Individual reports describing the current status of projects have been entered individually into the data base.

  8. Potential applicability of the Los Alamos Antiproton Research Program to advanced propulsion

    SciTech Connect

    Howe, S.D.; Hynes, M.V.; Prael, R.E.; Stewart, J.D.

    1986-01-01

    The Los Alamos National Laboratory currently has a research program in antimatter interactions. The immediate objective of the program is to develop the low energy antiproton production capabilities at LEAR and the technology to store antiprotons. The initial experimental goal is to measure the gravitational mass of antiprotons. The technology required for the experiment, however, may allow high-density storage concepts to be experimentally investigated. Analysis of antiproton production over the last 30 years indicates that milligram quantities of antiprotons could conceivably be produced early in the next century. Thus, antiproton propulsion concepts may begin to be feasible. Some results of preliminary calculations pertinent to antiproton powered rocket engines will be presented.

  9. Los Alamos National Laboratory Yucca Mountain Site Characterization Project 1992 quality program status report

    SciTech Connect

    Bolivar, S.L.; Burningham, A.; Chavez, P.

    1994-03-01

    This status report summarizes the activities and accomplishments of the Los Alamos Yucca Mountain Site Characterization Project`s quality assurance program for calendar year 1992. The report includes major sections on Program Activities and Trend Analysis. Program Activities are discussed periodically at quality meetings. The most significant issue addressed in 1992 has been the timely revision of quality administrative procedures. The procedure revision process was streamlined from 55 steps to 7. The number of forms in procedures was reduced by 38%, and the text reduced by 29%. This allowed revision in 1992 of almost half of all implementing procedures. The time necessary to complete the revision process (for a procedure) was reduced from 11 months to 3 months. Other accomplishments include the relaxation of unnecessarily strict training requirements, requiring quality assurance reviews only from affected organizations, and in general simplifying work processes. All members of the YMP received training to the new Orientation class Eleven other training classed were held. Investigators submitted 971 records to the Project and only 37 were rejected. The software program has 115 programs approved for quality-affecting work. The Project Office conducted 3 audits and 1 survey of Los Alamos activities. We conducted 14 audits and 4 surveys. Eight corrective action reports were closed, leaving only one open. Internally, 22 deficiencies were recognized. This is a decrease from 65 in 1991. Since each deficiency requires about 2 man weeks to resolve, the savings are significant. Problems with writing acceptable deficiency reports have essentially disappeared. Trend reports for 1992 were examined and are summarized herein. Three adverse trends have been closed; one remaining adverse trend will be closed when the affected procedures are revised. The number of deficiencies issued to Los Alamos compared to other participants is minimal.

  10. Energy supply and environmental issues: The Los Alamos National Laboratory experience in regional and international programs

    SciTech Connect

    Goff, S.J.

    1995-12-31

    The Los Alamos National Laboratory, operated by the University of California, encompasses more than forty-three square miles of mesas and canyons in northern New Mexico. A Department of Energy national laboratory, Los Alamos is one of the largest multidisciplinary, multiprogram laboratories in the world. Our mission, to apply science and engineering capabilities to problems of national security, has expanded to include a broad array of programs. We conduct extensive research in energy, nuclear safeguards and security, biomedical science, computational science, environmental protection and cleanup, materials science, and other basic sciences. The Energy Technology Programs Office is responsible for overseeing and developing programs in three strategic areas: energy systems and the environment, transportation and infrastructure, and integrated chemicals and materials processing. Our programs focus on developing reliable, economic and environmentally sound technologies that can help ensure an adequate supply of energy for the nation. To meet these needs, we are involved in programs that range from new and enhanced oil recovery technologies and tapping renewable energy sources, through efforts in industrial processes, electric power systems, clean coal technologies, civilian radioactive waste, high temperature superconductivity, to studying the environmental effects of energy use.

  11. Los Alamos National Laboratory Science Education Program. Annual progress report, October 1, 1995--September 30, 1996

    SciTech Connect

    Gill, D.H.

    1997-01-01

    The National Teacher Enhancement program (NTEP) is a three-year, multi-laboratory effort funded by the National Science Foundation and the Department of Energy to improve elementary school science programs. The Los Alamos National Laboratory targets teachers in northern New Mexico. FY96, the third year of the program, involved 11 teams of elementary school teachers (grades 4-6) in a three-week summer session, four two-day workshops during the school year and an on-going planning and implementation process. The teams included twenty-one teachers from 11 schools. Participants earned a possible six semester hours of graduate credit for the summer institute and two hours for the academic year workshops from the University of New Mexico. The Laboratory expertise in the earth and environmental science provided the tie between the Laboratory initiatives and program content, and allowed for the design of real world problems.

  12. ICF diagnostics. Revision 1

    SciTech Connect

    Coleman, L.W.

    1982-12-17

    In the past several years there have been significant advances and accomplishments in the field of Inertial Confinement Fusion (ICF) research which are directly attributable to an active experimental program supported by the development and applications of sophisticated and specialized diagnostics instruments and techniques. The continued development of high temporal-and spatial-resolution diagnostics, although with a somewhat different technical emphasis than previously, is essential for maintaining progress in ICF. With the generation of inertial fusion drivers now becoming available progress toward higher density compression of fusion fuel will be attained at the expense of temperature, and consequently emissions from the targets will be limited. At the same time since the targets are being driven to higher density they are more opaque to the low-to-moderate energy x-rays (up to a few keV) and particles (alpha particles, protons, and knock-on charged particles) that have been utilized for diagnosing target performance.

  13. An Overview of the Los Alamos Program on Asteroid Mitigation by a Nuclear Explosion

    NASA Astrophysics Data System (ADS)

    Weaver, R.; Gisler, G. R.; Plesko, C. S.; Ferguson, J.

    2014-12-01

    Los Alamos National Laboratory is standing up a new program to address the mitigation of a potentially hazardous objects (PHO) by using nuclear explosives. A series of efforts at Los Alamos have been working this problem for the last few years in an informal fashion. We now have a funded program to dedicate time to this important mission. The goal of our project is to study the effectiveness of using a nuclear explosive to mitigate (alter orbit or destroy) an PHO on an Earth crossing path. We are also pursuing studies of impact hazards should the international leadership decide not to organize a mission for active mitigation of a PHO. Such impact hazards are characterized as local, regional or global. Impact hazards include: a direct hit in an urban area (potentially catastrophic but highly unlikely); the generation a significant tsunami from an ocean impact close to a coastline and regional and global effects from medium to large impactors. Previous studies at Los Alamos have looked at 2D and 3D simulations in the deep ocean from large bolides, as well as impacts that have global consequences. More recent work has included radiation-hydrodynamic simulations of momentum transfer (and enhancement) from a low energy (10 kt) stand-off source, as well as surface and subsurface high energy explosions (100 kt - 10 Mt) for example PHOs. The current program will carefully look at two main aspects of using a standoff nuclear source: 1) a computational study for the optimum height-of-burst (HOB) of a stand-off burst using our best energy coupling techniques for both neutrons and x-rays; and 2) as a function of the nuclear energy produced and the HOB what is the optimum energy field: neutrons or x-rays. This team is also working with NNSA and NASA Goddard to compare numerical results for these complicated simulations on a well defined series of test problems involving both kinetic impactors and stand-off nuclear energy sources. Results will be shown by the co-authors on

  14. LANL HED Programs Overview

    SciTech Connect

    Flippo, Kirk Adler

    2015-04-23

    The Powerpoint presentation provides an overview of High-Energy Density (HED) Physis, ICF and Burning Plasma research programs at Los Alamos National Lab. in New Mexico. Work in nuclear diagnostics is also presented, along with a summary of collaborations and upcoming projects.

  15. Los Alamos National Laboratory.

    ERIC Educational Resources Information Center

    Hammel, Edward F., Jr.

    1982-01-01

    Current and post World War II scientific research at the Los Alamos National Laboratory (New Mexico) is discussed. The operation of the laboratory, the Los Alamos consultant program, and continuation education, and continuing education activities at the laboratory are also discussed. (JN)

  16. Preparing Los Alamos National Laboratory's Waste Management Program for the Future - 12175

    SciTech Connect

    Jones, Scotty W.; Dorries, Alison M.; Singledecker, Steven; Henckel, George

    2012-07-01

    The waste management program at Los Alamos National Laboratory (LANL) is undergoing significant transition to establish a lean highly functioning waste management program that will succeed the large environmental cleanup waste management program. In the coming years, the environmental cleanup activities will be mostly completed and the effort will change to long-term stewardship. What will remain in waste management is a smaller program focused on direct off-site shipping to cost-effectively enable the enduring mission of the laboratory in support of the national nuclear weapons program and fundamental science and research. It is essential that LANL implement a highly functioning efficient waste management program in support of the core missions of the national weapons program and fundamental science and research - and LANL is well on the way to that goal. As LANL continues the transition process, the following concepts have been validated: - Business drivers including the loss of onsite disposal access and completion of major environmental cleanup activities will drive large changes in waste management strategies and program. - A well conceived organizational structure; formal management systems; a customer service attitude; and enthusiastic managers are core to a successful waste management program. - During times of organizational transition, a project management approach to managing change in a complex work place with numerous complex deliverables is successful strategy. - Early and effective engagement with waste generators, especially Project Managers, is critical to successful waste planning. - A well-trained flexible waste management work force is vital. Training plans should include continuous training as a strategy. - A shared fate approach to managing institutional waste decisions, such as the LANL Waste Management Recharge Board is effective. - An efficient WM program benefits greatly from modern technology and innovation in managing waste data and

  17. Microbial characterization for the Source-Term Waste Test Program (STTP) at Los Alamos

    SciTech Connect

    Leonard, P.A.; Strietelmeier, B.A.; Pansoy-Hjelvik, M.E.; Villarreal, R.

    1999-04-01

    The effects of microbial activity on the performance of the proposed underground nuclear waste repository, the Waste Isolation Pilot Plant (WIPP) at Carlsbad, New Mexico are being studied at Los Alamos National Laboratory (LANL) as part of an ex situ large-scale experiment. Actual actinide-containing waste is being used to predict the effect of potential brine inundation in the repository in the distant future. The study conditions are meant to simulate what might exist should the underground repository be flooded hundreds of years after closure as a result of inadvertent drilling into brine pockets below the repository. The Department of Energy (DOE) selected LANL to conduct the Actinide Source-Term Waste Test Program (STTP) to confirm the predictive capability of computer models being developed at Sandia National Laboratory.

  18. The restructuring of the Environmental Restoration Program at Los Alamos National Laboratory

    SciTech Connect

    Jansen, J.

    1995-09-01

    The Los Alamos National Laboratory (Laboratory) has supported this country through 50 years of research and development primarily in the area of nuclear weapons and energy. As a result of the Laboratory`s activities, contamination of the environment occurred. The cleanup of contaminated areas and the prevention of further contamination has become an important part of the Laboratory`s new mission: the reduction of the nuclear danger. The cleanup of the Laboratory is somewhat unique. It is a very large site. It includes 43 square miles of Laboratory land that will continue to be in industrial use or under institutional control for decades or centuries to come. It also includes about 25 square miles of former Laboratory land that has been converted to residential use, the Los Alamos townsite. The unusual topography and hydrogeology of the site was shaped during the last million years through the eruption of a huge volcano and the ensuing erosion of the tuff-basalt plateau into 19 canyons and associated finger-like mesas. During the early phase of the Environmental Restoration (ER) Program, 2,100 sites were identified as potential release sites. Sites range from a few hundred square feet to a few acres in area. Contamination depths range from a few to 100 feet. Typical contaminants are chemicals, heavy metals, radioactive constituents, and high explosives. Of greatest concern are surface contamination, migration of the contaminants along the surface into creeks and arroyos of the canyons and ultimately into the Rio Grande, and migration through the earth into the drinking water aquifers.

  19. University of New Mexico-Los Alamos National Laboratory Program in Volcanology

    NASA Astrophysics Data System (ADS)

    Goff, F.; Fischer, T.; Baldridge, W.; Wohletz, K.; Smith, G.; Heiken, G.; Valentine, G.; Elston, W.

    2002-05-01

    The UNM-LANL Program in Volcanology was a vision of Wolf Elston in the late 1980s. Finally established in mid-1992, the program takes advantage of the extensive volcanic record preserved in northern New Mexico, and of the unique expertise and exceptional research facilities existing at the two institutions. Courses are directed toward upper division and graduate level students. The Los Alamos participants are adjunct professors and they take an active role in creating courses, advising thesis candidates, and providing research support. The curriculum is flexible but has a core upper division class in Physical Volcanology. Other classes offered in various years have included Volcanology and Human Affairs; Magmatic and Geothermal Systems; Tectonics and Magma Generation; Volcanoes of North America; Instrumentation for Volcanology; and Advanced Igneous Petrology. Perhaps the most renowned class in the program is the Volcanology Summer Field Course offered in even numbered years. This 3.5-week class is based in the Jemez Mountains volcanic field, which contains the famous Valles caldera (1.2 Ma to 50 ka). All types of calc-alkaline to alkalic domes, flows, tuffs, and intrusions, plus derivative sediments, mineralized zones, and thermal fluids are available for instructional purposes. Students are required to complete nine rigorous field exercises starting with basic instruction in pyroclastic fall, flow, and surge, then progressing towards hydrothermally altered, intracaldera resurgent dome and moat deposits in an active hot spring and fumarole system. The class is open to graduate students, advanced undergraduates, and private sector employees with special needs. Enrollment is competitive with limited financial support and limited space for 17 students. Evening lectures, study time, lodging, and meals are provided at the UNM-owned Young's Ranch built in the 1920s, nestled in a canyon flanked by orange cliffs of Bandelier Tuff. About 120 students from 12 countries have

  20. Stockpile Stewardship: Los Alamos

    ScienceCinema

    McMillan, Charlie; Morgan, Nathanial; Goorley, Tom; Merrill, Frank; Funk, Dave; Korzekwa, Deniece; Laintz, Ken

    2016-07-12

    "Heritage of Science" is a short video that highlights the Stockpile Stewardship program at Los Alamos National Laboratory. Stockpile Stewardship was conceived in the early 1990s as a national science-based program that could assure the safety, security, and effectiveness of the U.S. nuclear deterrent without the need for full-scale underground nuclear testing. This video was produced by Los Alamos National Laboratory for screening at the Lab's Bradbury Science Museum in Los Alamos, NM and is narrated by science correspondent Miles O'Brien.

  1. Overview of ICF program at Centre D{close_quote}Etudes de Limeil-Valenton

    SciTech Connect

    Cel-V Laser Team

    1996-05-01

    The major objectives of the CEA-DAM laser program is to determine the various requirements to achieve thermonuclear fusion in laboratory. We report here recent results obtained at Centre d{close_quote}Etudes de Limeil-Valenton on high density X-Ray implosions, radiative transfer processes, hydrodynamic instabilities and laser-plasma interaction involved in cavity physics. Ignition and a moderate gain appears to be achievable with a laser energy of about 1.5{minus}2 MJ delivered at {lambda}=0, 35 {mu}m with a shaped pulse (duration{approximately}16 ns). The construction of such a laser is realizable and a conceptual design is under preparation. {copyright} {ital 1996 American Institute of Physics.}

  2. Leading Change: A Case Study of Alamo Academies--An Industry-Driven Workforce Partnership Program

    ERIC Educational Resources Information Center

    Hu, Xiaodan; Bowman, Gene

    2016-01-01

    In this study, the authors focus on the initiation and development of the Alamo Academies, aiming to illustrate an exemplary industry-driven model that addresses workforce development in local community. After a brief introduction of the context, the authors summarized major factors that contribute to the success of the collaboration model,…

  3. Motor training programs of arm and hand in patients with MS according to different levels of the ICF: a systematic review

    PubMed Central

    2012-01-01

    Background The upper extremity plays an important role in daily functioning of patients with Multiple Sclerosis (MS) and strongly influences their quality of life. However, an explicit overview of arm-hand training programs is lacking. The present review aims to investigate the training components and the outcome of motor training programs for arm and hand in MS. Methods A computerized systematic literature search in 5 databases (PubMed, CINAHL, EMBASE, PEDro and Cochrane) was performed using the following Mesh terms: Multiple Sclerosis, Rehabilitation, Physical Education and Training, Exercise, Patient-Centered Care, Upper Extremity, Activities of Daily Living, Motor Skills, Motor Activity, Intervention Studies and Clinical Trial. The methodological quality of the selected articles was scored with the Van Tulder Checklist. A descriptive analyses was performed using the PICO principle, including scoring of training components with the calculation of Hedges’g effect sizes. Results Eleven studies were eligible (mean Van Tulder-score = 10.82(SD2.96)). Most studies reported a specific improvement in arm hand performance at the ICF level that was trained at. The mean number of training components was 5.5(SD2.8) and a significant correlation (r = 0.67; p < 0.05) between the number of training components and effect sizes was found. The components ‘client-centered’ and ‘functional movement’ were most frequently used, whereas ‘distribution based practice’, ‘feedback’ and ‘random practice’ were never used. The component ‘exercise progression’ was only used in studies with single ICF body function training, with the exception of 1 study with activity level training. Studies including the component ‘client-centred’ demonstrated moderate to high effect sizes. Conclusion Motor training programs (both at the ICF body function and activity level) have shown to improve arm and hand performance in MS in which the value of the training

  4. Addressing the Highest Risk: Environmental Programs at Los Alamos National Laboratory

    SciTech Connect

    Forbes, Elaine E

    2012-06-08

    Report topics: Current status of cleanup; Shift in priorities to address highest risk; Removal of above-ground waste; and Continued focus on protecting water resources. Partnership between the National Nuclear Security Administration's Los Alamos Site Office, DOE Carlsbad Field Office, New Mexico Environment Department, and contractor staff has enabled unprecedented cleanup progress. Progress on TRU campaign is well ahead of plan. To date, have completed 130 shipments vs. 104 planned; shipped 483 cubic meters of above-ground waste (vs. 277 planned); and removed 11,249 PE Ci of material at risk (vs. 9,411 planned).

  5. Los Alamos National Laboratory Science Education Programs. Progress report, October 1, 1994--December 31, 1994

    SciTech Connect

    Gill, D.H.

    1995-02-01

    During the 1994 summer institute NTEP teachers worked in coordination with LANL and the Los Alamos Middle School and Mountain Elementary School to gain experience in communicating on-line, to gain further information from the Internet and in using electronic Bulletin Board Systems (BBSs) to exchange ideas with other teachers. To build on their telecommunications skills, NTEP teachers participated in the International Telecommunications In Education Conference (Tel*ED `94) at the Albuquerque Convention Center on November 11 & 12, 1994. They attended the multimedia keynote address, various workshops highlighting many aspects of educational telecommunications skills, and the Telecomm Rodeo sponsored by Los Alamos National Laboratory. The Rodeo featured many presentations by Laboratory personnel and educational institutions on ways in which telecommunications technologies can be use din the classroom. Many were of the `hands-on` type, so that teachers were able to try out methods and equipment and evaluate their usefulness in their own schools and classrooms. Some of the presentations featured were the Geonet educational BBS system, the Supercomputing Challenge, and the Sunrise Project, all sponsored by LANL; the `CU-seeMe` live video software, various simulation software packages, networking help, and many other interesting and useful exhibits.

  6. Fabrication Process for Machined and Shrink-Fitted Impactor-Type Liners for the LOS Alamos Hedp Program

    NASA Astrophysics Data System (ADS)

    Randolph, B.

    2004-11-01

    Composite liners have been fabricated for the Los Alamos liner-driven High Energy Density Physics (HEDP) experiments using impactors formed by physical vapor deposition, and by machining and shrink fitting. Chemical vapor deposition has been proposed for some ATLAS liner applications. This paper describes the processes used to fabricate machined and shrink-fitted impactors; these processes have been used for copper impactors in 1100 aluminum liners and for 6061 T-6 aluminum impactors in 1100 aluminum liners. The most successful processes have been largely empirically developed and rely upon a combination of shrink-fitting and light press fitting. The processes used to date will be described along with some considerations for future composite liners for the HEDP Program.

  7. Los Alamos National Laboratory summary plan to fabricate mixed oxide lead assemblies for the fissile material disposition program

    SciTech Connect

    Buksa, J.J.; Eaton, S.L.; Trellue, H.R.; Chidester, K.; Bowidowicz, M.; Morley, R.A.; Barr, M.

    1997-12-01

    This report summarizes an approach for using existing Los Alamos National Laboratory (Laboratory) mixed oxide (MOX) fuel-fabrication and plutonium processing capabilities to expedite and assure progress in the MOX/Reactor Plutonium Disposition Program. Lead Assembly MOX fabrication is required to provide prototypic fuel for testing in support of fuel qualification and licensing requirements. It is also required to provide a bridge for the full utilization of the European fabrication experience. In part, this bridge helps establish, for the first time since the early 1980s, a US experience base for meeting the safety, licensing, safeguards, security, and materials control and accountability requirements of the Department of Energy and Nuclear Regulatory Commission. In addition, a link is needed between the current research and development program and the production of disposition mission fuel. This link would also help provide a knowledge base for US regulators. Early MOX fabrication and irradiation testing in commercial nuclear reactors would provide a positive demonstration to Russia (and to potential vendors, designers, fabricators, and utilities) that the US has serious intent to proceed with plutonium disposition. This report summarizes an approach to fabricating lead assembly MOX fuel using the existing MOX fuel-fabrication infrastructure at the Laboratory.

  8. Evaluation of potential surface rupture and review of current seismic hazards program at the Los Alamos National Laboratory. Final report

    SciTech Connect

    Not Available

    1991-12-09

    This report summarizes the authors review and evaluation of the existing seismic hazards program at Los Alamos National Laboratory (LANL). The report recommends that the original program be augmented with a probabilistic analysis of seismic hazards involving assignment of weighted probabilities of occurrence to all potential sources. This approach yields a more realistic evaluation of the likelihood of large earthquake occurrence particularly in regions where seismic sources may have recurrent intervals of several thousand years or more. The report reviews the locations and geomorphic expressions of identified fault lines along with the known displacements of these faults and last know occurrence of seismic activity. Faults are mapped and categorized into by their potential for actual movement. Based on geologic site characterization, recommendations are made for increased seismic monitoring; age-dating studies of faults and geomorphic features; increased use of remote sensing and aerial photography for surface mapping of faults; the development of a landslide susceptibility map; and to develop seismic design standards for all existing and proposed facilities at LANL.

  9. SBIR and STTR Program for Assistive Technology Device Development: Evaluation of Impact Using an ICF-Based Classification

    ERIC Educational Resources Information Center

    Bauer, Stephen M.; Arthanat, Sajay

    2010-01-01

    The purpose of this paper was to evaluate the impact of Small Business Innovation Research (SBIR) and Small Business Technology Transfer Research (STTR) grant programs of 5 federal agencies National Institutes of Health (NIH), National Science Foundation (NSF), U.S. Department of Education (USDE), U.S. Department of Agriculture (USDA), and…

  10. Los Alamos National Laboratory and Lawrence Livermore National Laboratory Plutonium Sustainment Monthly Program Report September 2012

    SciTech Connect

    McLaughlin, Anastasia Dawn; Storey, Bradford G.; Bowidowicz, Martin; Robertson, William G.; Hobson, Beverly F.

    2012-10-22

    In March of 2012 the Plutonium Sustainment program at LANL completed or addressed the following high-level activities: (1) Delivered Revision 2 of the Plutonium Sustainment Manufacturing Study, which incorporated changes needed due to the release of the FY2013 President's Budget and the delay in the Chemistry and Metallurgy Research Replacement Nuclear Facility (CMRRNF). (2) W87 pit type development activities completed a detailed process capability review for the flowsheet in preparation for the Engineering Development Unit Build. (3) Completed revising the Laser Beam Welding schedule to address scope and resource changes. (4) Completed machining and inspecting the first set of high-fidelity cold parts on Precitech 2 for Gemini. (5) The Power Supply Assembly Area started floor cutting with a concrete saw and continued legacy equipment decommissioning. There are currently no major issues associated with achieving MRT L2 Milestones 4195-4198 or the relevant PBIs associated with Plutonium Sustainment. There are no budget issues associated with FY12 final budget guidance. Table 1 identifies all Baseline Change Requests (BCRs) that were initiated, in process, or completed during the month. The earned value metrics overall for LANL are within acceptable thresholds, so no high-level recovery plan is required. Each of the 5 major LANL WBS elements is discussed in detail.

  11. ICF quarterly report, October-December 1998, volume 8, number 4

    SciTech Connect

    Kaufmann, B

    1998-09-30

    The ICF Quarterly Report is pub-lished four times each fiscal year by the Inertial Confinement Fusion/National Ignition Facility and High-Energy-Density Experimental Science (ICF/NIF/ HEDES) Program at the Lawrence Livermore National Laboratory (LLNL). The journal summarizes selected current research achievements of the LLNLICF/NIF/HEDES Program.

  12. Hydrodynamick instabilities on ICF capsules

    SciTech Connect

    Haan, S.W.

    1991-06-07

    This article summarizes our current understanding of hydrodynamic instabilities as relevant to ICF. First we discuss classical, single mode Rayleigh-Taylor instability, and nonlinear effects in the evolution of a single mode. Then we discuss multimode systems, considering: (1) the onset of nonlinearity; (2) a second order mode coupling theory for weakly nonlinear effects, and (3) the fully nonlinear regime. Two stabilization mechanisms relevant to ICF are described next: gradient scale length and convective stabilization. Then we describe a model which is meant to estimate the weakly nonlinear evolution of multi-mode systems as relevant to ICF, given the short-wavelength stabilization. Finally, we discuss the relevant code simulation capability, and experiments. At this time we are quite optimistic about our ability to estimate instability growth on ICF capsules, but further experiments and simulations are needed to verify the modeling. 52 refs.

  13. Fundamentals of ICF Hohlraums

    SciTech Connect

    Rosen, M D

    2005-09-30

    On the Nova Laser at LLNL, we demonstrated many of the key elements required for assuring that the next laser, the National Ignition Facility (NIF) will drive an Inertial Confinement Fusion (ICF) target to ignition. The indirect drive (sometimes referred to as ''radiation drive'') approach converts laser light to x-rays inside a gold cylinder, which then acts as an x-ray ''oven'' (called a hohlraum) to drive the fusion capsule in its center. On Nova we've demonstrated good understanding of the temperatures reached in hohlraums and of the ways to control the uniformity with which the x-rays drive the spherical fusion capsules. In these lectures we will be reviewing the physics of these laser heated hohlraums, recent attempts at optimizing their performance, and then return to the ICF problem in particular to discuss scaling of ICF gain with scale size, and to compare indirect vs. direct drive gains. In ICF, spherical capsules containing Deuterium and Tritium (DT)--the heavy isotopes of hydrogen--are imploded, creating conditions of high temperature and density similar to those in the cores of stars required for initiating the fusion reaction. When DT fuses an alpha particle (the nucleus of a helium atom) and a neutron are created releasing large amount amounts of energy. If the surrounding fuel is sufficiently dense, the alpha particles are stopped and can heat it, allowing a self-sustaining fusion burn to propagate radially outward and a high gain fusion micro-explosion ensues. To create those conditions the outer surface of the capsule is heated (either directly by a laser or indirectly by laser produced x-rays) to cause rapid ablation and outward expansion of the capsule material. A rocket-like reaction to that outward flowing heated material leads to an inward implosion of the remaining part of the capsule shell. The pressure generated on the outside of the capsule can reach nearly 100 megabar (100 million times atmospheric pressure [1b = 10{sup 6} cgs

  14. Cascade ICF power reactor

    SciTech Connect

    Hogan, W.J.; Pitts, J.H.

    1986-05-20

    The double-cone-shaped Cascade reaction chamber rotates at 50 rpm to keep a blanket of ceramic granules in place against the wall as they slide from the poles to the exit slots at the equator. The 1 m-thick blanket consists of layers of carbon, beryllium oxide, and lithium aluminate granules about 1 mm in diameter. The x rays and debris are stopped in the carbon granules; the neutrons are multiplied and moderated in the BeO and breed tritium in the LiAlO/sub 2/. The chamber wall is made up of SiO tiles held in compression by a network of composite SiC/Al tendons. Cascade operates at a 5 Hz pulse rate with 300 MJ in each pulse. The temperature in the blanket reaches 1600 K on the inner surface and 1350 K at the outer edge. The granules are automatically thrown into three separate vacuum heat exchangers where they give up their energy to high pressure helium. The helium is used in a Brayton cycle to obtain a thermal-to-electric conversion efficiency of 55%. Studies have been done on neutron activation, debris recovery, vaporization and recondensation of blanket material, tritium control and recovery, fire safety, and cost. These studies indicate that Cascade appears to be a promising ICF reactor candidate from all standpoints. At the 1000 MWe size, electricity could be made for about the same cost as in a future fission reactor.

  15. Los Alamos National Laboratory

    SciTech Connect

    Dogliani, Harold O

    2011-01-19

    The purpose of the briefing is to describe general laboratory technical capabilities to be used for various groups such as military cadets or university faculty/students and post docs to recruit into a variety of Los Alamos programs. Discussed are: (1) development and application of high leverage science to enable effeictive, predictable and reliability outcomes; (2) deter, detect, characterize, reverse and prevent the proliferation of weapons of mass destruction and their use by adversaries and terrorists; (3) modeling and simulation to define complex processes, predict outcomes, and develop effective prevention, response, and remediation strategies; (4) energetic materials and hydrodynamic testing to develop materials for precise delivery of focused energy; (5) materials cience focused on fundamental understanding of materials behaviors, their quantum-molecular properties, and their dynamic responses, and (6) bio-science to rapidly detect and characterize pathogens, to develop vaccines and prophylactic remedies, and to develop attribution forensics.

  16. 42 CFR 442.15 - Duration of agreement for ICFs/MR.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... (CONTINUED) MEDICAL ASSISTANCE PROGRAMS STANDARDS FOR PAYMENT TO NURSING FACILITIES AND INTERMEDIATE CARE FACILITIES FOR THE MENTALLY RETARDED Provider Agreements § 442.15 Duration of agreement for ICFs/MR....

  17. Contributions to the Genesis and Progress of ICF

    SciTech Connect

    Nuckolls, J H

    2006-02-15

    Inertial confinement fusion (ICF) has progressed from the detonation of large-scale fusion explosions initiated by atomic bombs in the early 1950s to final preparations for initiating small-scale fusion explosions with giant lasers. The next major step after ignition will be development of high performance targets that can be initiated with much smaller, lower cost lasers. In the 21st century and beyond, ICF's grand challenge is to develop practical power plants that generate low cost, clean, inexhaustible fusion energy. In this chapter, I first describe the origin in 1960-61 of ICF target concepts, early speculations on laser driven 'Thermonuclear Engines' for power production and rocket propulsion, and encouraging large-scale nuclear explosive experiments conducted in 1962. Next, I recall the 40-year, multi-billion dollar ignition campaign - to develop a matched combination of sufficiently high-performance implosion lasers and sufficiently stable targets capable of igniting small fusion explosions. I conclude with brief comments on the NIF ignition campaign and very high-performance targets, and speculations on ICF's potential in a centuries-long Darwinian competition of future energy systems. My perspectives in this chapter are those of a nuclear explosive designer, optimistic proponent of ICF energy, and Livermore Laboratory leader. The perspectives of Livermore's post 1970 laser experts and builders, and laser fusion experimentalists are provided in a chapter written by John Holzrichter, a leading scientist and leader in Livermore's second generation laser fusion program. In a third chapter, Ray Kidder, a theoretical physicist and early laser fusion pioneer, provides his perspectives including the history of the first generation laser fusion program he led from 1962-1972.

  18. Los Alamos National Laboratory Prepares for Fire Season

    SciTech Connect

    L’Esperance, Manny

    2016-07-18

    Through the establishment of a Wildland Fire Program Office, and the Interagency Fire Base located on Laboratory property, Los Alamos National Laboratory is continuing and improving a program to prepare for wildland fire.

  19. Los Alamos National Laboratory Prepares for Fire Season

    ScienceCinema

    L’Esperance, Manny

    2016-08-10

    Through the establishment of a Wildland Fire Program Office, and the Interagency Fire Base located on Laboratory property, Los Alamos National Laboratory is continuing and improving a program to prepare for wildland fire.

  20. Los Alamos offers Fellowships

    NASA Astrophysics Data System (ADS)

    Los Alamos National Laboratory in New Mexico is calling for applications for postdoctoral appointments and research fellowships. The positions are available in geoscience as well as other scientific disciplines.The laboratory, which is operated by the University of California for the Department of Energy, awards J. Robert Oppenheimer Research Fellowships to scientists that either have or will soon complete doctoral degrees. The appointments are for two years, are renewable for a third year, and carry a stipend of $51,865 per year. Potential applicants should send a resume or employment application and a statement of research goals to Carol M. Rich, Div. 89, Human Resources Development Division, MS P290, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 by mid-November.

  1. Backlighting prospects for ICF targets

    SciTech Connect

    Rupert, V.; Matthews, D.; Ahlstrom, H.; Attwood, D.; Price, R.; Coleman, L.; Manes, K.; Slivinsky, V.

    1981-01-01

    High energy x-ray backlighters are necessary to diagnose the implosion symmetry and stability of intermediate and high density targets. Synchronization requirements between the target irradiating pulse and the radiograph place severe constraints on the type of x-ray sources which can be used and favors laser irradiated backlighters. Data gathered on line emitters as a function of laser pulselength, wavelength and intensity in the 5 to 10 keV region are used to determine which diagnostic instruments will be feasible for ICF target experiments, and the requirements for backlighter irradiation.

  2. The Los Alamos primer

    SciTech Connect

    Serber, R.

    1992-01-01

    This book contains the 1943 lecture notes of Robert Serber. Serber was a protege of J. Robert Oppenheimer and member of the team that built the first atomic bomb - reveal what the Los Alamos scientists knew, and did not know, about the terrifying weapon they were building.

  3. Strategic defense initiatives at Los Alamos National Laboratory

    SciTech Connect

    Rockwood, S.D.

    1985-01-01

    This presentation reviews the Strategic Defense Initiative (SDI) programs at Los Alamos National Laboratory, noting especially the needs for and applications of optics and optical technologies. Table I lists the various activities at Los Alamos contributing to SDI programs. The principal, nonnuclear SDI programs are: (1) the free-electron laser, and (2) neutral particle beams. Both should be considered as potential long-range-kill systems, but still in the futuristic category.

  4. Modeling Mix in ICF Implosions

    NASA Astrophysics Data System (ADS)

    Weber, C. R.; Clark, D. S.; Chang, B.; Eder, D. C.; Haan, S. W.; Jones, O. S.; Marinak, M. M.; Peterson, J. L.; Robey, H. F.

    2014-10-01

    The observation of ablator material mixing into the hot spot of ICF implosions correlates with reduced yield in National Ignition Campaign (NIC) experiments. Higher Z ablator material radiatively cools the central hot spot, inhibiting thermonuclear burn. This talk focuses on modeling a ``high-mix'' implosion from the NIC, where greater than 1000 ng of ablator material was inferred to have mixed into the hot spot. Standard post-shot modeling of this implosion does not predict the large amounts of ablator mix necessary to explain the data. Other issues are explored in this talk and sensitivity to the method of radiation transport is found. Compared with radiation diffusion, Sn transport can increase ablation front growth and alter the blow-off dynamics of capsule dust. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

  5. Monte Carlo methods in ICF

    SciTech Connect

    Zimmerman, G.B.

    1997-06-24

    Monte Carlo methods appropriate to simulate the transport of x-rays, neutrons, ion and electrons in Inertial Confinement Fusion targets are described and analyzed. The Implicit Monte Carlo method of x-ray transport handles symmetry within indirect drive ICF hohlraums well, but can be improved 50X in efficiency by angular biasing the x-rays towards the fuel capsule. Accurate simulation of thermonuclear burns nd burn diagnostics involves detailed particle source spectra, charged particle ranges, inflight reaction kinematics, corrections for bulk and thermal Doppler effects and variance reduction to obtain adequate statistics for rare events. It is found that the effects of angular Coulomb scattering must be included in models of charged particle transport through heterogeneous materials.

  6. Superconductivity program for electric systems, Superconductivity Technology Center, Los Alamos National Laboratory, annual progress report for fiscal year 1997

    SciTech Connect

    Willis, J.O.; Newnam, B.E.; Peterson, D.E.

    1999-03-01

    Development of high-temperature superconductors (HTS) has undergone tremendous progress during the past year. Kilometer tape lengths and associated magnets based on BSCCO materials are now commercially available from several industrial partners. Superconducting properties in the exciting YBCO coated conductors continue to be improved over longer lengths. The Superconducting Partnership Initiative (SPI) projects to develop HTS fault current limiters and transmission cables have demonstrated that HTS prototype applications can be produced successfully with properties appropriate for commercial applications. Research and development activities at LANL related to the HTS program for Fiscal Year 1997 are collected in this report. LANL continues to support further development of Bi2223 and Bi2212 tapes in collaboration with American Superconductor Corporation (ASC) and Oxford Superconductivity Technology, Inc. (OSTI), respectively. The tape processing studies involving novel thermal treatments and microstructural characterization have assisted these companies in commercializing these materials. The research on second-generation YBCO-coated conductors produced by pulsed-laser deposition (PLD) over buffer template layers produced by ion beam-assisted deposition (IBAD) continues to lead the world. The applied physics studies of magnetic flux pinning by proton and heavy ion bombardment of BSCCO and YBCO tapes have provided many insights into improving the behavior of these materials in magnetic fields. Sections 4 to 7 of this report contain a list of 29 referred publications and 15 conference abstracts, a list of patent and license activities, and a comprehensive list of collaborative agreements in progress and completed.

  7. Explosive Flux Compression: 50 Years of Los Alamos Activities

    SciTech Connect

    Fowler, C.M.; Thomson, D.B.; Garn, W.B.

    1998-10-18

    Los Alamos flux compression activities are surveyed, mainly through references in view of space limitations. However, two plasma physics programs done with Sandia National Laboratory are discussed in more detail.

  8. Explosive Flux Compression:. 50 Years of LOS Alamos Activities

    NASA Astrophysics Data System (ADS)

    Fowler, C.; Thomson, D.; Garn, W.

    2004-11-01

    Los Alamos flux compression activities are surveyed, mainly through references in view of space limitations. However, two plasma physics programs done with Sandia National Laboratory are discussed in more detail.

  9. ICF machine: a web-based system for collection of ICF data.

    PubMed

    Della Mea, Vincenzo; Fioresi, Valerio

    2012-01-01

    The International Classification of Functioning, Disability and Health (ICF) is a WHO classification for health and health-related issues. In order to foster ICF application in information systems, we devised an implementation profile in ClaML (Classification Markup Language) that allows for representation of ICF subsets and we developed a web-based system for collecting ICF data based on from their ClaML representation. The implementation profile and the application have been tested on 17 subsets, which have been translated into ClaML and then submitted to the web application, to produce test documents.

  10. The role of experimental science in ICF -- examples from X-ray diagnostics and targets

    NASA Astrophysics Data System (ADS)

    Kilkenny, J. D.

    2016-10-01

    The USA Inertial Confinement Fusion (ICF) Program evolved from the Nuclear Test Program which had restricted shot opportunities for experimentalists to develop sophisticated experimental techniques. In contrast the ICF program in the US was able to increase the shot availability on its large facilities, and develop sophisticated targets and diagnostics to measure and understand the properties of the high energy density plasmas (HEDP) formed. Illustrative aspects of this evolution at Lawrence Livermore National Laboratory (LLNL), with examples of the development of diagnostics and target fabrication are described.

  11. Inertial confinement fusion. 1995 ICF annual report, October 1994--September 1995

    SciTech Connect

    1996-06-01

    Lawrence Livermore National Laboratory`s (LLNL`s) Inertial Confinement Fusion (ICF) Program is a Department of Energy (DOE) Defense Program research and advanced technology development program focused on the goal of demonstrating thermonuclear fusion ignition and energy gain in the laboratory. During FY 1995, the ICF Program continued to conduct ignition target physics optimization studies and weapons physics experiments in support of the Defense Program`s stockpile stewardship goals. It also continued to develop technologies in support of the performance, cost, and schedule goals of the National Ignition Facility (NIF) Project. The NIF is a key element of the DOE`s Stockpile Stewardship and Management Program. In addition to its primary Defense Program goals, the ICF Program provides research and development opportunities in fundamental high-energy-density physics and supports the necessary research base for the possible long-term application to inertial fusion energy (IFE). Also, ICF technologies have had spin-off applications for industrial and governmental use. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  12. The Magnetically Driven Direct Drive Approach to Ignition: Responses to Questions by Panel 1 of the FY15 ICF Program Review.

    SciTech Connect

    Sinars, Daniel

    2015-07-01

    The long-term goal of the pulsed-­power based, magnetically driven target approach is to achieve high single­shot yields (0.5-­1 GJ per shot). This goal may take decades to achieve, but if successful we believe it would be a key capability for the Stockpile Stewardship program, as noted as far back as 1988 in the Laboratory Microfusion Capability Phase 1 (U) study. If this approach is successful, it may be possible to achieve these yields from targets absorbing up to 10 MJ in a laboratory pulsed power facility with a stored energy of roughly 130 MJ. Such a facility would be substantially cheaper, and not as complex, than the corresponding pulsed power facility required for producing comparable yields from x-ray driven capsule targets.

  13. Core science and technology development plan for indirect-drive ICF ignition. Revision 1

    SciTech Connect

    Powell, H.T.; Kilkenny, J.D.

    1995-12-01

    To define the development work needed to support inertial confinement fusion (ICF) program goals, the authors have assembled this Core Science and Technology (CS and T) Plan that encompasses nearly all science research and technology development in the ICF program. The objective of the CS and T Plan described here is to identify the development work needed to ensure the success of advanced ICF facilities, in particular the National Ignition Facility (NIF). This plan is intended as a framework to facilitate planning and coordination of future ICF programmatic activities. The CS and T Plan covers all elements of the ICF program including laser technology, optic manufacturing, target chamber, target diagnostics, target design and theory, target components and fabrication, and target physics experiments. The CS and T Plan has been divided into these seven different technology development areas, and they are used as level-1 categories in a work breakdown structure (WBS) to facilitate the organization of all activities in this plan. The scope of the CS and T Plan includes all research and development required to support the NIF leading up to the activation and initial operation as an indirect-drive facility. In each of the CS and T main development areas, the authors describe the technology and issues that need to be addressed to achieve NIF performance goals. To resolve all issues and achieve objectives, an extensive assortment of tasks must be performed in a coordinated and timely manner. The authors describe these activities and present planning schedules that detail the flow of work to be performed over a 10-year period corresponding to estimated time needed to demonstrate fusion ignition with the NIF. Besides the benefits to the ICF program, the authors also discuss how the commercial sector and the nuclear weapons science may profit from the proposed research and development program.

  14. Los Alamos Neutron Science Center

    SciTech Connect

    Kippen, Karen Elizabeth

    2016-11-08

    For more than 30 years the Los Alamos Neutron Science Center (LANSCE) has provided the scientific underpinnings in nuclear physics and material science needed to ensure the safety and surety of the nuclear stockpile into the future. In addition to national security research, the LANSCE User Facility has a vibrant research program in fundamental science, providing the scientific community with intense sources of neutrons and protons to perform experiments supporting civilian research and the production of medical and research isotopes. Five major experimental facilities operate simultaneously. These facilities contribute to the stockpile stewardship program, produce radionuclides for medical testing, and provide a venue for industrial users to irradiate and test electronics. In addition, they perform fundamental research in nuclear physics, nuclear astrophysics, materials science, and many other areas. The LANSCE User Program plays a key role in training the next generation of top scientists and in attracting the best graduate students, postdoctoral researchers, and early-career scientists. The U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA) —the principal sponsor of LANSCE—works with the Office of Science and the Office of Nuclear Energy, which have synergistic long-term needs for the linear accelerator and the neutron science that is the heart of LANSCE.

  15. Integrated Verification Experiment data collected as part of the Los Alamos National Laboratory`s Source Region Program. Appendix B: Surface ground motion

    SciTech Connect

    Weaver, T.A.; Baker, D.F.; Edwards, C.L.; Freeman, S.H.

    1993-10-01

    Surface ground motion was recorded for many of the Integrated Verification Experiments using standard 10-, 25- and 100-g accelerometers, force-balanced accelerometers and, for some events, using golf balls and 0.39-cm steel balls as surface inertial gauges (SIGs). This report contains the semi-processed acceleration, velocity, and displacement data for the accelerometers fielded and the individual observations for the SIG experiments. Most acceleration, velocity, and displacement records have had calibrations applied and have been deramped, offset corrected, and deglitched but are otherwise unfiltered or processed from their original records. Digital data for all of these records are stored at Los Alamos National Laboratory.

  16. The ICF and Postsurgery Occupational Therapy after Traumatic Hand Injury

    ERIC Educational Resources Information Center

    Fitinghoff, Helene; Lindqvist, Birgitta; Nygard, Louise; Ekholm, Jan; Schult, Marie-Louise

    2011-01-01

    Recent studies have examined the effectiveness of hand rehabilitation programmes and have linked the outcomes to the concept of ICF but not to specific ICF category codes. The objective of this study was to gain experience using ICF concepts to describe occupational therapy interventions during postsurgery hand rehabilitation, and to describe…

  17. Los Alamos National Laboratory Building Cost Index

    SciTech Connect

    Orr, H.D.; Lemon, G.D.

    1983-01-01

    The Los Alamos National Laboratory Building Cost Index indicates that actual escalation since 1970 is near 10% per year. Therefore, the Laboratory will continue using a 10% per year escalation rate for construction estimates through 1985 and a slightly lower rate of 8% per year from 1986 through 1990. The computerized program compares the different elements involved in the cost of a typical construction project, which for our purposes, is a complex of office buildings and experimental laboratores. The input data used in the program consist primarily of labor costs and material and equipment costs. The labor costs are the contractural rates of the crafts workers in the Los Alamos area. For the analysis, 12 field-labor draft categories are used; each is weighted corresponding to the labor craft distribution associated with the typical construction project. The materials costs are current Los Alamos prices. Additional information sources include material and equipment quotes obtained through conversations with vendors and from trade publications. The material and equipment items separate into 17 categories for the analysis and are weighted corresponding to the material and equipment distribution associated with the typical construction project. The building cost index is compared to other national building cost indexes.

  18. Los Alamos National Laboratory building cost index

    SciTech Connect

    Orr, H.D.; Lemon, G.D.

    1982-10-01

    The Los Alamos National Laboratory Building Cost Index indicates that actual escalation since 1970 is near 10% per year. Therefore, the Laboratory will continue using a 10% per year escalation rate for construction estimates through 1985 and a slightly lower rate of 8% per year from 1986 through 1990. The computerized program compares the different elements involved in the cost of a typical construction project, which for our purposes, is a complex of office buildings and experimental laboratories. The input data used in the program consist primarily of labor costs and material and equipment costs. The labor costs are the contractual rates of the crafts workers in the Los Alamos area. For the analysis, 12 field-labor craft categories are used; each is weighted corresponding to the labor craft distribution associated with the typical construction project. The materials costs are current Los Alamos prices. Additional information sources include material and equipment quotes obtained through conversations with vendors and from trade publications. The material and equipment items separate into 17 categories for the analysis and are weighted corresponding to the material and equipment distribution associated with the typical construction project. The building cost index is compared to other national building cost indexes.

  19. Nuclear Forensics at Los Alamos National Laboratory

    SciTech Connect

    Podlesak, David W; Steiner, Robert E.; Burns, Carol J.; LaMont, Stephen P.; Tandon, Lav

    2012-08-09

    The overview of this presentation is: (1) Introduction to nonproliferation efforts; (2) Scope of activities at Los Alamos National Laboratory; (3) Facilities for radioanalytical work at LANL; (4) Radiochemical characterization capabilities; and (5) Bulk chemical and materials analysis capabilities. Some conclusions are: (1) Analytical chemistry measurements on plutonium and uranium matrices are critical to numerous defense and non-defense programs including safeguards accountancy verification measurements; (2) Los Alamos National Laboratory operates capable actinide analytical chemistry and material science laboratories suitable for nuclear material forensic characterization; (3) Actinide analytical chemistry uses numerous means to validate and independently verify that measurement data quality objectives are met; and (4) Numerous LANL nuclear facilities support the nuclear material handling, preparation, and analysis capabilities necessary to evaluate samples containing nearly any mass of an actinide (attogram to kilogram levels).

  20. Risk management at Los Alamos National Laboratory

    SciTech Connect

    Brooks, D.G.; Stack, D.W.

    1993-11-01

    Los Alamos National Laboratory has risk management programs at a number of administrative levels. Each line organization has responsibility for risk management for routine operations. The Facility Risk Management group (HS-3) is the Los Alamos organization with the primary responsibility for risk management including providing input and expertise to facilities and line managers in the management and documentation of ES&H hazards and risks associated with existing and new activities. One of the major contributions this group has made to laboratory risk management program is to develop and implement a hazard identification and classification methodology that is readily adaptable to continuously changing classification guidelines such as DOE-STD-1027. The increased emphasis on safety at Los Alamos has led to the formation of additional safety oversight organization such as the Integration and Coordination Office (ICO), which is responsible for prioritization of risk management activities. In the fall of 1991, nearly 170 DOE inspectors spent 6 weeks analyzing the environmental, safety, and health activities at Los Alamos. The result of this audit was a list of over 1000 findings, each indicating some deficiency in current Laboratory operations relative to DOE and other government regulation. The audit team`s findings were consolidated and ``action plans`` were developed to address the findings. This resulted in over 200 action plans with a total estimated cost of almost $1 billion. The Laboratory adopted a risk-based prioritization process to attempt to achieve as much risk reduction as possible with the available resources. This paper describes the risk based prioritization model that was developed.

  1. Type C investigation of electrical fabrication projects in ICF Kaiser shops

    SciTech Connect

    Huckfeldt, R.A.

    1995-06-01

    A Type C Investigation Board was convened to investigate an electrical miswiring problem found during the operation of the electrical distribution trailer for the TWRS Rotary Mode Core Sampling Truck {number_sign}2. The trailer was designed by WHC and fabricated ICF KH on site for use in the Characterization Program. This problem resulted in a serious safety hazard since the support truck frame/chassis became electrically energized. This final report provides results of the ``Type C Investigation, Electrical Fabrication Projects in ICF KH Shops, June, 1995.`` It contains the investigation scope, executive summary, relevant facts, analysis, conclusions and corrective actions. DOE Order 5484.1, ``Environmental Protection, Safety and Health Protection Information Reporting Requirements,`` was followed in preparation of this report. Because the incident was electrical in nature and involved both Westinghouse Hanford Company and ICF Kaiser Hanford organizations, the board included members from both contractors and members with considerable electrical expertise.

  2. Lawrence Livermore National Laboratories Perspective on Code Development and High Performance Computing Resources in Support of the National HED/ICF Effort

    SciTech Connect

    Clouse, C. J.; Edwards, M. J.; McCoy, M. G.; Marinak, M. M.; Verdon, C. P.

    2015-07-07

    Through its Advanced Scientific Computing (ASC) and Inertial Confinement Fusion (ICF) code development efforts, Lawrence Livermore National Laboratory (LLNL) provides a world leading numerical simulation capability for the National HED/ICF program in support of the Stockpile Stewardship Program (SSP). In addition the ASC effort provides high performance computing platform capabilities upon which these codes are run. LLNL remains committed to, and will work with, the national HED/ICF program community to help insure numerical simulation needs are met and to make those capabilities available, consistent with programmatic priorities and available resources.

  3. Large-scale demonstration and deployment project at Los Alamos National Laboratory

    SciTech Connect

    Brown, S.; McFee, J.; Broom, C.; Dugger, H.; Stallings, E.

    1999-04-01

    Established by the US Department of Energy (DOE) Environmental Management program through its Office of Science and Technology, the Deactivation and Decommissioning Focus Area is developing answers to the technological problems that hinder Environmental Management`s extensive cleanup efforts. The optimized application of technologies to ongoing nuclear facility decontamination and dismantlement is critical in meeting the challenge of decommissioning approximately 9,000 buildings and structures within the DOE complex. The significant technical and economic concerns in this area underscore a national imperative for the qualification and timely delivery of cost-reduction technologies and management approaches to meet federal and private needs. At Los Alamos National Laboratory (LANL), a Large-Scale Demonstration and Deployment Project (LSDDP) has been established to facilitate demonstration and deployment of technologies for the characterization, decontamination, and volume reduction of oversized metallic waste, mostly in the form of gloveboxes contaminated with transuranic radionuclides. The LANL LSDDP is being managed by an integrated contractor team (ICT) consisting of IT Corporation, ICF Incorporated, and Florida International University and includes representation from LANL`s Environmental Management Program Office. The ICT published in the Commerce Business Daily a solicitation for interest for innovative technologies capable of improving cost and performance of the baseline process. Each expression of interest response was evaluated and demonstration contract negotiations are under way for those technologies expected to be capable of meeting the project objectives. This paper discusses management organization and approach, the results of the technology search, the technology selection methodology, the results of the selection process, and future plans for the program.

  4. Accommodation Outcomes and the ICF Framework

    ERIC Educational Resources Information Center

    Schreuer, Naomi

    2009-01-01

    Accommodation of the environment and technology is one of the key mediators of adjustment to disability and participation in community. In this article, accommodations are tested empirically as facilitators of return to work and participation, as defined by the "International Classification of Disability, Function, and Health" (ICF) and…

  5. 42 CFR 442.15 - Duration of agreement for ICF/IIDs.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 4 2014-10-01 2014-10-01 false Duration of agreement for ICF/IIDs. 442.15 Section 442.15 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS STANDARDS FOR PAYMENT TO NURSING FACILITIES AND INTERMEDIATE...

  6. ICF quarterly report January - March 1997 volume 7, number 3

    SciTech Connect

    Murray, J

    1998-04-09

    The National Ignition Facility Project The mission of the National Ignition Facility (NIF) is to produce ignition and modest energy gain in inertial confinement fusion (ICF) targets. Achieving these goals will maintain U.S. world leadership in ICF and will directly benefit the U.S. Department of Energy (DOE) missions in national security, science and technology, energy resources, and industrial competitiveness. Development and operation of the NIF are consistent with DOE goals for environmental quality, openness to the community, and nuclear nonproliferation and arms control. Although the primary mission of inertial fusion is for defense applications, inertial fusion research will provide critical information for the development of inertial fusion energy. The NIF, under construction at Lawrence Livermore National Laboratory (LLNL), is a cornerstone of the DOE's science-based Stockpile Stewardship Program for addressing high-energy-density physics issues in the absence of nuclear weapons testing. In pursuit of this mission, the DOE's Defense Programs has developed a state-of-the-art capability with the NIF to investigate high-energy-density physics in the laboratory with a microfusion capability for defense and energy applications. As a Strategic System Acquisition, the NIF Project has a separate and disciplined reporting chain to DOE as shown below.

  7. Los Alamos Laser Eye Investigation.

    SciTech Connect

    Odom, C. R.

    2005-01-01

    A student working in a laser laboratory at Los Alamos National Laboratory sustained a serious retinal injury to her left eye when she attempted to view suspended particles in a partially evacuated target chamber. The principle investigator was using the white light from the flash lamp of a Class 4 Nd:YAG laser to illuminate the particles. Since the Q-switch was thought to be disabled at the time of the accident, the principal investigator assumed it would be safe to view the particles without wearing laser eye protection. The Laboratory Director appointed a team to investigate the accident and to report back to him the events and conditions leading up to the accident, equipment malfunctions, safety management causal factors, supervisory and management action/inaction, adequacy of institutional processes and procedures, emergency and notification response, effectiveness of corrective actions and lessons learned from previous similar events, and recommendations for human and institutional safety improvements. The team interviewed personnel, reviewed documents, and characterized systems and conditions in the laser laboratory during an intense six week investigation. The team determined that the direct and primary failures leading to this accident were, respectively, the principle investigator's unsafe work practices and the institution's inadequate monitoring of worker performance. This paper describes the details of the investigation, the human and institutional failures, and the recommendations for improving the laser safety program.

  8. Critical partnerships: Los Alamos, universities, and industry

    SciTech Connect

    Berger, C.L.

    1997-04-01

    Los Alamos National Laboratory, situated 35 miles northwest of Santa Fe, NM, is one of the Department of Energy`s three Defense Programs laboratories. It encompasses 43 square miles, employees approximately 10,000 people, and has a budget of approximately $1.1B in FY97. Los Alamos has a strong post-cold war mission, that of reducing the nuclear danger. But even with that key role in maintaining the nation`s security, Los Alamos views partnerships with universities and industry as critical to its future well being. Why is that? As the federal budget for R&D comes under continued scrutiny and certain reduction, we believe that the triad of science and technology contributors to the national system of R&D must rely on and leverage each others capabilities. For us this means that we will rely on these partners to help us in 5 key ways: We expect that partnerships will help us maintain and enhance our core competencies. In doing so, we will be able to attract the best scientists and engineers. To keep on the cutting edge of research and development, we have found that partnerships maintain the excellence of staff through new and exciting challenges. Additionally, we find that from our university and corporate partners we often learn and incorporate {open_quotes}best practices{close_quotes} in organizational management and operations. Finally, we believe that a strong national system of R&D will ensure and enhance our ability to generate revenues.

  9. Los Alamos low-level waste performance assessment status

    SciTech Connect

    Wenzel, W.J.; Purtymun, W.D.; Dewart, J.M.; Rodgers, J.E.

    1986-06-01

    This report reviews the documented Los Alamos studies done to assess the containment of buried hazardous wastes. Five sections logically present the environmental studies, operational source terms, transport pathways, environmental dosimetry, and computer model development and use. This review gives a general picture of the Los Alamos solid waste disposal and liquid effluent sites and is intended for technical readers with waste management and environmental science backgrounds but without a detailed familiarization with Los Alamos. The review begins with a wide perspective on environmental studies at Los Alamos. Hydrology, geology, and meteorology are described for the site and region. The ongoing Laboratory-wide environmental surveillance and waste management environmental studies are presented. The next section describes the waste disposal sites and summarizes the current source terms for these sites. Hazardous chemical wastes and liquid effluents are also addressed by describing the sites and canyons that are impacted. The review then focuses on the transport pathways addressed mainly in reports by Healy and Formerly Utilized Sites Remedial Action Program. Once the source terms and potential transport pathways are described, the dose assessment methods are addressed. Three major studies, the waste alternatives, Hansen and Rogers, and the Pantex Environmental Impact Statement, contributed to the current Los Alamos dose assessment methodology. Finally, the current Los Alamos groundwater, surface water, and environmental assessment models for these mesa top and canyon sites are described.

  10. Program management assessment of Federal Facility Compliance Agreement regarding CAA-40 C.F.R. Part 61, Subpart H at the Los Alamos National Laboratory

    SciTech Connect

    1997-01-01

    An assessment of Los Alamos National Laboratory`s management system related to facility compliance with an element of the Clean Air Act was performed under contract by a team from Northern Arizona University. More specifically, a Federal Facilities Compliance Agreement (FFCA) was established in 1996 to bring the Laboratory into compliance with emissions standards of radionuclides, commonly referred to as Rad/NESHAP. In the fall of 1996, the four-person team of experienced environmental managers evaluated the adequacy of relevant management systems to implement the FFCA provisions. The assessment process utilized multiple procedures including document review, personnel interviews and re-interviews, and facility observations. The management system assessment was completed with a meeting among team members, Laboratory officials and others on November 1, 1996 and preparation of an assessment report.

  11. Improved ICF implosion performance through precision engineering features

    NASA Astrophysics Data System (ADS)

    Weber, Christopher

    2016-10-01

    The thin membrane that holds the capsule in-place in the hohlraum is recognized as one of the most significant contributors to reduced performance in indirect drive inertial confinement fusion (ICF) experiments on the National Ignition Facility (NIF). This membrane, known as the ``tent'', seeds a perturbation that is amplified by Rayleigh-Taylor and can rupture the capsule. The ICF program is undertaking a major effort to develop a less damaging capsule support mechanism. Possible alternatives include micron-scale rods spanning the hohlraum width and supporting either the capsule or stiffening the fill-tube, a larger fill-tube to both fill and support the capsule, or a low-density foam layer that protects the capsule from the tent impact. In addition to the challenges presented by nano and microscale engineering, it is difficult to model and experimentally verify improvement from these changes. The 3D nature of the proposed replacements and the radiation shadows they cast on the capsule prohibit direct simulation. Therefore a combination of reduced models and experimental verification are used to set requirements and down-select the options. Ultimately the improved capsule support will be used to repeat a DT-layered implosion and demonstrate improved performance. Work performed under the auspices of the U.S. D.O.E. by Lawrence Livermore National Laboratory under Contract No. DE-AC52-07NA27344.

  12. Wetted Foam Liquid Fuel ICF Target Experiments

    NASA Astrophysics Data System (ADS)

    Olson, R.; Leeper, R.; Yi, A.; Zylstra, A.; Kline, J.; Peterson, R.; Braun, T.; Biener, J.; Biener, M.; Kozioziemski, B.; Sater, J.; Hamza, A.; Nikroo, A.; Berzak Hopkins, L.; Lepape, S.; MacKinnon, A.; Meezan, N.

    2015-11-01

    We are developing a new NIF experimental platform that employs wetted foam liquid fuel layer ICF capsules. We plan to use the liquid fuel layer capsules in a NIF experimental campaign to explore the relationship between hot spot convergence ratio (CR) and the robustness of hot spot formation. DT or D2 Liquid Layer ICF capsules allow for flexibility in hot spot convergence ratio via the adjustment of the initial cryogenic capsule temperature and, hence, DT vapor density. Our hypothesis is that the predictive capability of hot spot formation is robust and 1D-like for a relatively low CR hot spot (CR =15), but will become less reliable as hot spot CR is increased to CR>20. Simulations indicate that backing off on hot spot CR is an excellent way to reduce capsule instability growth and to improve robustness to low-mode x-ray flux asymmetries. In these initial experiments, we are testing our hypothesis by measuring hot spot size, neutron yield, ion temperature, and burn width to infer hot spot pressure and compare to predictions for implosions with hot spot CR's in the range of 12 to 25. Larger scale experiments are also being designed, with the longer-term objective of developing a liquid fuel layer ICF capsule platform with robust thermonuclear burn, modest CR, and significant α-heating with burn propagation.

  13. Plasma photonics in ICF & HED conditions

    NASA Astrophysics Data System (ADS)

    Michel, Pierre; Turnbull, David; Divol, Laurent; Pollock, Bradley; Chen, Cecilia Y.; Tubman, Eleanor; Goyon, Clement S.; Moody, John D.

    2015-11-01

    Interactions between multiple high-energy laser beams and plasma can be used to imprint refractive micro-structures in plasmas via the lasers' ponderomotive force. For example, Inertial confinement fusion (ICF) experiments at the National Ignition Facility already rely on the use of plasma gratings to redirect laser light inside an ICF target and tune the symmetry of the imploded core. More recently, we proposed new concepts of plasma polarizer and waveplate, based on two-wave mixing schemes and laser-induced plasma birefringence. In this talk, we will present new experimental results showing the first demonstration of a fully tunable plasma waveplate, which achieved near-perfect circular laser polarization. We will discuss further prospects for novel ``plasma photonics'' concepts based on two- and four-wave mixing, such as optical switches, bandpass filters, anti-reflection blockers etc. These might find applications in ICF and HED experiments by allowing to manipulate the lasers directly in-situ (i.e. inside the targets), as well as for the design of high power laser systems. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

  14. Los Alamos strategic defense research and the ABM (Anti-Ballistic Missile) Treaty

    SciTech Connect

    Morales, R.; Pendley, R.E.

    1988-04-01

    This report reviews the restrictions placed on Los Alamos strategic defense by current arms control treaty agreements, including controversies about the correct interpretation of the major treaty at issue, the Anti-Ballistic Missile Treaty; and it assesses the current status of the most significant Los Alamos strategic defense programs in terms of their compliance with that Treaty, and others. 7 tabs.

  15. Fabrication and characterization of aluminum heavy liners for the pulse power systems of the high energy density physics program at Los Alamos

    SciTech Connect

    Anderson, W.E.; Day, R.D.; Bartos, J.J.; Garcia, F.P.; Hatch, D.J.; Hannah, P.R.

    1996-09-01

    Aluminum heavy liners of three basic types have been fabricated for Los Alamos pulse power experiments. The first fabrications used a conventional hand operated lathe with high speed steel cutting tools. More recent fabrications have used numerically controlled lathes with carbide insert cutting tools. A numerically controlled Pneumo lathe with an air bearing spindle and with air bearing cross slides has been used to fabricate the most recent examples of the 3.2 gm Pegasus Precision Liner that is normally accelerated to 3 mm/{micro}s for experiments at the Pegasus II pulse power facility. The basic dimensions, including wall thickness, of fourteen of these parts have been characterized by an automated inspection machine. Liner surface finishes are measured directly by stylus profilometer and by optical interferometric analysis of cast polymeric replicas. Statistics of these measurements will be presented. Plans for future fabrication of similar and larger liners with increasingly stringent specification of wall thickness and of surface finish are described along with corresponding plans for liner characterization improvements.

  16. Implementation of the International Classification of Functioning, Disability and Health (ICF) and the ICF Children and Youth Version (ICF-CY) within the context of augmentative and alternative communication.

    PubMed

    Pless, Mia; Granlund, Mats

    2012-03-01

    The purpose of this article is to discuss the implementation of the International Classification of Functioning, Disability and Health (ICF), and the ICF version for Children and Youth (ICF-CY), within the context of augmentative and alternative communication (AAC). First, the use of the ICF and the ICF-CY in AAC research is analyzed. Second, examples of training and implementation of ICF from other contexts besides AAC are provided. Finally, we synthesize data to provide directions for future implementation of the ICF and ICF-CY in the field of AAC. We conclude that, within AAC, organizational routines and intervention documents need to be adapted to the universal language and classification framework of the ICF and ICF-CY. Furthermore, examples are needed to demonstrate how factors affect implementation at organizational and individual levels.

  17. The Edward Teller Medal Lecture: the Evolution Toward Indirect Drive and Two Decades of Progress Toward Icf Ignition and Burn

    NASA Astrophysics Data System (ADS)

    Lindl, John D.

    In 1972, I joined the Livermore ICF Theory and Target Design group led by John Nuckolls, shortly after publication of John's seminal Nature article on ICF. My primary role, working with others in the target design program including Mordy Rosen, Steve Haan, and Larry Suter, has been as a target designer and theorist who utilized the LASNEX code to perform numerical experiments, which along with analysis of laboratory and underground thermonuclear experiments allowed me to develop a series of models and physical insights which have been used to set the direction and priorities of the Livermore program.

  18. Recent Advances in Indirect Drive ICF Target Physics

    SciTech Connect

    Hammel, B; Lindl, J; Amendt, P A; Bernat, G W; Collins, G W; Glenzer, S H; Koch, S H; Haan, S; Landen, O L; Suter, L J

    2002-10-08

    In preparation for ignition on the National Ignition Facility, the Lawrence Livermore National Laboratory's Inertial Confinement Fusion Program, working in collaboration with Los Alamos National Laboratory, Commissariat a lEnergie Atomique (CEA), and Laboratory for Laser Energetics at the University of Rochester, has performed a broad range of experiments on the Nova and Omega lasers to test the fundamentals of the NIF target designs. These studies have refined our understanding of the important target physics, and have led to many of the specifications for the NIF laser and the cryogenic ignition targets. Our recent work has been focused in the areas of hohlraum energetics, symmetry, shock physics, and target design optimization & fabrication.

  19. Recent advances in indirect drive ICF target physics at LLNL

    SciTech Connect

    Bernat, T P; Collins, G W; Haan, S; Hammel, B A; Landen, O L; MacGowan, B J; Sutter, L J

    1998-01-13

    In preparation for ignition on the National Ignition Facility, the Lawrence Livermore National Laboratory's Inertial Confinement Fusion Program, working in collaboration with Los Alamos National Laboratory, Commissariat a 1'Energie Atomique (CEA), and Laboratory for Laser Energetics at the University of Rochester, has performed a broad range of experiments on the Nova and Omega lasers to test the fundamentals of the NIF target designs. These studies have refined our understanding of the important target physics, and have led to many of the specifications for the NIF laser and the cryogenic ignition targets. Our recent work has been focused in the areas of hohlraum energetics, symmetry, shock physics, and target design optimization & fabrication.

  20. Plasma and ion beam processing at Los Alamos

    SciTech Connect

    Rej, D.J.; Davis, H.A.; Henins, I.

    1994-07-01

    Efforts are underway at Los Alamos National Laboratory to utilize plasma and intense ion beam science and technology of the processing of advanced materials. A major theme involves surface modification of materials, e.g., etching, deposition, alloying, and implantation. In this paper, we concentrate on two programs, plasma source ion implantation and high-intensity pulsed ion beam deposition.

  1. Wetted foam liquid fuel ICF target experiments

    SciTech Connect

    Olson, R. E.; Leeper, R. J.; Yi, S. A.; Kline, J. L.; Zylstra, A. B.; Peterson, R. R.; Shah, R.; Braun, T.; Biener, J.; Kozioziemski, B. J.; Sater, J. D.; Biener, M. M.; Hamza, A. V.; Nikroo, A.; Hopkins, L. Berzak; Ho, D.; LePape, S.; Meezan, N. B.

    2016-05-26

    We are developing a new NIF experimental platform that employs wetted foam liquid fuel layer ICF capsules. We will use the liquid fuel layer capsules in a NIF sub-scale experimental campaign to explore the relationship between hot spot convergence ratio (CR) and the predictability of hot spot formation. DT liquid layer ICF capsules allow for flexibility in hot spot CR via the adjustment of the initial cryogenic capsule temperature and, hence, DT vapor density. Our hypothesis is that the predictive capability of hot spot formation is robust and 1D-like for a relatively low CR hot spot (CR~15), but will become less reliable as hot spot CR is increased to CR>20. Simulations indicate that backing off on hot spot CR is an excellent way to reduce capsule instability growth and to improve robustness to low-mode x-ray flux asymmetries. In the initial experiments, we will test our hypothesis by measuring hot spot size, neutron yield, ion temperature, and burn width to infer hot spot pressure and compare to predictions for implosions with hot spot CR's in the range of 12 to 25. Larger scale experiments are also being designed, and we will advance from sub-scale to full-scale NIF experiments to determine if 1D-like behavior at low CR is retained as the scale-size is increased. The long-term objective is to develop a liquid fuel layer ICF capsule platform with robust thermonuclear burn, modest CR, and significant α-heating with burn propagation.

  2. Wetted foam liquid fuel ICF target experiments

    NASA Astrophysics Data System (ADS)

    Olson, R. E.; Leeper, R. J.; Yi, S. A.; Kline, J. L.; Zylstra, A. B.; Peterson, R. R.; Shah, R.; Braun, T.; Biener, J.; Kozioziemski, B. J.; Sater, J. D.; Biener, M. M.; Hamza, A. V.; Nikroo, A.; Berzak Hopkins, L.; Ho, D.; LePape, S.; Meezan, N. B.

    2016-05-01

    We are developing a new NIF experimental platform that employs wetted foam liquid fuel layer ICF capsules. We will use the liquid fuel layer capsules in a NIF sub-scale experimental campaign to explore the relationship between hot spot convergence ratio (CR) and the predictability of hot spot formation. DT liquid layer ICF capsules allow for flexibility in hot spot CR via the adjustment of the initial cryogenic capsule temperature and, hence, DT vapor density. Our hypothesis is that the predictive capability of hot spot formation is robust and 1D-like for a relatively low CR hot spot (CR∼15), but will become less reliable as hot spot CR is increased to CR>20. Simulations indicate that backing off on hot spot CR is an excellent way to reduce capsule instability growth and to improve robustness to low-mode x-ray flux asymmetries. In the initial experiments, we will test our hypothesis by measuring hot spot size, neutron yield, ion temperature, and burn width to infer hot spot pressure and compare to predictions for implosions with hot spot CR's in the range of 12 to 25. Larger scale experiments are also being designed, and we will advance from sub-scale to full-scale NIF experiments to determine if 1D-like behavior at low CR is retained as the scale-size is increased. The long-term objective is to develop a liquid fuel layer ICF capsule platform with robust thermonuclear burn, modest CR, and significant α-heating with burn propagation.

  3. Wetted foam liquid fuel ICF target experiments

    DOE PAGES

    Olson, R. E.; Leeper, R. J.; Yi, S. A.; ...

    2016-05-26

    We are developing a new NIF experimental platform that employs wetted foam liquid fuel layer ICF capsules. We will use the liquid fuel layer capsules in a NIF sub-scale experimental campaign to explore the relationship between hot spot convergence ratio (CR) and the predictability of hot spot formation. DT liquid layer ICF capsules allow for flexibility in hot spot CR via the adjustment of the initial cryogenic capsule temperature and, hence, DT vapor density. Our hypothesis is that the predictive capability of hot spot formation is robust and 1D-like for a relatively low CR hot spot (CR~15), but will becomemore » less reliable as hot spot CR is increased to CR>20. Simulations indicate that backing off on hot spot CR is an excellent way to reduce capsule instability growth and to improve robustness to low-mode x-ray flux asymmetries. In the initial experiments, we will test our hypothesis by measuring hot spot size, neutron yield, ion temperature, and burn width to infer hot spot pressure and compare to predictions for implosions with hot spot CR's in the range of 12 to 25. Larger scale experiments are also being designed, and we will advance from sub-scale to full-scale NIF experiments to determine if 1D-like behavior at low CR is retained as the scale-size is increased. The long-term objective is to develop a liquid fuel layer ICF capsule platform with robust thermonuclear burn, modest CR, and significant α-heating with burn propagation.« less

  4. Office of Inspector General report on audit of environmental restoration at the Los Alamos National Laboratory

    SciTech Connect

    1997-07-01

    Los Alamos` Environmental Restoration Program is charged with cost effectively remediating contaminated sites. To monitor progress toward this goal, the University of California, the contractor operating Los Alamos, and the Department negotiated eight performance measures. The objective of this audit was to determine whether the contract performance criteria were reasonable, measurable, and complete, thereby allowing the Department to determine if Los Alamos had expeditiously and cost effectively remediated contaminated sites. The audit determined that Los Alamos did not generate the information needed to assess the cost effectiveness of remediation on a site-by-site basis. This situation occurred because the performance criteria used to evaluate cost effectiveness were not always reasonable, measurable, and complete. As a result, neither Los Alamos nor the Department could evaluate the cost effectiveness or progress of the remediation program or accurately budget for upcoming remediation activities. The audit also determined that Los Alamos` sample validation procedures were too costly because Los Alamos validated more samples than called for by Federal and New Mexico standard practices. While the Office of Inspector General recognizes the importance of prudent sample validation, Los Alamos paid $540,000 more than necessary to validate sample results. These funds could have been used to remediate contaminated sites.

  5. Hot Dry Rock Overview at Los Alamos

    SciTech Connect

    Berger, Michael; Hendron, Robert H.

    1989-03-21

    The Hot Dry Rock (HDR) geothermal energy program is a renewable energy program that can contribute significantly to the nation's balanced and diversified energy mix. Having extracted energy from the first Fenton Hill HDR reservoir for about 400 days, and from the second reservoir for 30 days in a preliminary test, Los Alamos is focusing on the Long Term Flow Test and reservoir studies. Current budget limitations have slowed preparations thus delaying the start date of that test. The test is planned to gather data for more definitive reservoir modeling with energy availability or reservoir lifetime of primary interest. Other salient information will address geochemistry and tracer studies, microseismic response, water requirements and flow impedance which relates directly to pumping power requirements. During this year of ''preparation'' we have made progress in modeling studies, in chemically reactive tracer techniques, in improvements in acoustic or microseismic event analysis.

  6. Environmental surveillance at Los Alamos during 2008

    SciTech Connect

    Fuehne, David; Gallagher, Pat; Hjeresen, Denny; Isaacson, John; Johson, Scot; Morgan, Terry; Paulson, David; Rogers, David

    2009-09-30

    Environmental Surveillance at Los Alamos reports are prepared annually by the Los Alamos National Laboratory (the Laboratory) Environmental Programs Directorate, as required by US Department of Energy Order 450.1, General Environmental Protection Program, and US Department of Energy Order 231.1A, Environment, Safety, and Health Reporting. These annual reports summarize environmental data that are used to determine compliance with applicable federal, state, and local environmental laws and regulations, executive orders, and departmental policies. Additional data, beyond the minimum required, are also gathered and reported as part of the Laboratory’s efforts to ensure public safety and to monitor environmental quality at and near the Laboratory. Chapter 1 provides an overview of the Laboratory’s major environmental programs and explains the risks and the actions taken to reduce risks at the Laboratory from environmental legacies and waste management operations. Chapter 2 reports the Laboratory’s compliance status for 2007. Chapter 3 provides a summary of the maximum radiological dose the public and biota populations could have potentially received from Laboratory operations and discusses chemical exposures. The environmental surveillance and monitoring data are organized by environmental media (Chapter 4, air; Chapters 5 and 6, water and sediments; Chapter 7, soils; and Chapter 8, foodstuffs and biota) in a format to meet the needs of a general and scientific audience. Chapter 9 provides a summary of the status of environmental restoration work around LANL. A glossary and a list of acronyms and abbreviations are in the back of the report. Appendix A explains the standards for environmental contaminants, Appendix B explains the units of measurements used in this report, Appendix C describes the Laboratory’s technical areas and their associated programs, and Appendix D provides web links to more information.

  7. ICF syndrome with variable expression in sibs.

    PubMed Central

    Gimelli, G; Varone, P; Pezzolo, A; Lerone, M; Pistoia, V

    1993-01-01

    We describe a new familial case of ICF syndrome (immunodeficiency, centromeric instability, facial anomalies) in a woman of 29 years and in her brother of 30 years. The proband showed mental retardation, facial anomalies, recurrent respiratory infections, combined deficit of IgM and IgE immunoglobulin classes, and paracentromeric heterochromatin instability of chromosomes 1, 9, and 16. The brother had minor signs of the syndrome and had an apparently normal phenotype. Their parents were healthy and non-consanguineous. Chromosome anomalies consisted of homologous and non-homologous associations, chromatid and isochromatid breaks, deletions of whole arms, interchanges in the paracentromeric region, and multibranched configurations of chromosomes 1, 9, and 16. CD bands and fluorescence in situ hybridisation with alphoid DNA sequence probes specific for the centromeres of chromosomes 1 and 16 showed that the centromere was not directly implicated in the formation of multibranched configurations. These cases indicate the autosomal recessive mode of inheritance and the variable expressivity of the ICF syndrome. Images PMID:8320711

  8. Adaptive Mesh Refinement for ICF Calculations

    NASA Astrophysics Data System (ADS)

    Fyfe, David

    2005-10-01

    This paper describes our use of the package PARAMESH to create an Adaptive Mesh Refinement (AMR) version of NRL's FASTRAD3D code. PARAMESH was designed to create an MPI-based AMR code from a block structured serial code such as FASTRAD3D. FASTRAD3D is a compressible hydrodynamics code containing the physical effects relevant for the simulation of high-temperature plasmas including inertial confinement fusion (ICF) Rayleigh-Taylor unstable direct drive laser targets. These effects include inverse bremmstrahlung laser energy absorption, classical flux-limited Spitzer thermal conduction, real (table look-up) equation-of-state with either separate or identical electron and ion temperatures, multi-group variable Eddington radiation transport, and multi-group alpha particle transport and thermonuclear burn. Numerically, this physics requires an elliptic solver and a ray tracing approach on the AMR grid, which is the main subject of this paper. A sample ICF calculation will be presented. MacNeice et al., ``PARAMESH: A parallel adaptive mesh refinement community tool,'' Computer Physics Communications, 126 (2000), pp. 330-354.

  9. The physics of radiation driven ICF hohlraums

    SciTech Connect

    Rosen, M.D.

    1995-08-07

    On the Nova Laser at LLNL, we have recently demonstrated many of the key elements required for assuring that the next proposed laser, the National Ignition Facility (NIF) will drive an Inertial Confinement Fusion (ICF) target to ignition. The target uses the recently declassified indirect drive (sometimes referred to as {open_quotes}radiation drive{close_quotes}) approach which converts laser light to x-rays inside a gold cylinder, which then acts as an x-ray {open_quotes}oven{close_quotes} (called a hohlraum) to drive the fusion capsule in its center. On Nova we`ve demonstrated good understanding of the temperatures reached in hohlraums and of the ways to control the uniformity with which the x-rays drive the spherical fusion capsules. In this lecture we briefly review the fundamentals of ICF, and describe the capsule implosion symmetry advantages of the hohlraum approach. We then concentrate on a quantitative understanding of the scaling of radiation drive with hohlraum size and wall material, and with laser pulse length and power. We demonstrate that coupling efficiency of x-ray drive to the capsule increases as we proceed from Nova to the NIF and eventually to a reactor, thus increasing the gain of the system.

  10. Satellites monitor Los Alamos fires

    NASA Astrophysics Data System (ADS)

    Kalluri, Satya; White, Benjamin

    A man-made fire that was intended to be a “controlled burn” for clearing brush and wilderness at the Bandelier National Monument, New Mexico, became an inferno that devastated significant portions of Los Alamos during the first week of May 2000. Now known as the Cerro Grande fire, it was not confined to Los Alamos alone. The fire spread to 15% of the Santa Clara Indian Reservation and a substantial area of the surrounding national parks and U.S. forests.The National Weather Service estimates that more than 100,000 fires occur in the natural environment each year within the United States alone, of which about 90% are manmade. Remote sensing images from satellites could be used to detect and monitor these active fires and biomass burning. Forest fires have a significant environmental and economic impact, and timely information about their location and magnitude is essential to contain them.

  11. Water supply at Los Alamos during 1993. Progress report

    SciTech Connect

    Purtymun, W.D.; Stoker, A.K.; McLin, S.G.; Maes, M.N.; Glasco, T.A.

    1995-10-01

    This report summarizes production and aquifer conditions for water wells in the Guaje, Pajarito, and Otowi Well Fields. These wells supplied all of the potable water used for municipal and some industrial purposes in Los Alamos County and the Los Alamos National Laboratory during 1993. The wells in the Los Alamos Well Field were transferred to San Ildefonso Pueblo in 1992. Four of the wells in the Los Alamos Well Field were plugged in 1993. One of the two new wells in the Otowi Well Field became operational in 1993. The spring gallery in Water Canyon supplied nonpotable water for industrial use, while surface water from the Los Alamos Reservoir was diverted for irrigation. In 1993 no water was used from the Guaje Reservoir. Due to the maintenance and operating cost of diverting water from the reservoirs, it is not economically feasible to continue their use for irrigation. This report fulfills some of the requirements of the Los Alamos Groundwater Protection Management Program by documenting use of the groundwater for water supply and providing information hydrologic characteristics of the main aquifer. This report is a joint effort between the Laboratory Water Quality and Hydrology Group and the Utilities Department of Johnson Controls World Services Inc. (JCI). The purpose of this report is to ensure a continuing historical record and to provide guidance for management of water resources in long-range planning for the water supply system. We have issued one summary report for the period of 1947 to 1971 and 22 annual reports that contain the results of our studies of these water supplies. An additional report summarized the hydrology of the main aquifer with reference to future development of groundwater supplies. A report was issued in 1988 that examined the status of wells and future water supply.

  12. Environmental surveillance at Los Alamos during 2009

    SciTech Connect

    Fuehne, David; Poff, Ben; Hjeresen, Denny; Isaacson, John; Johnson, Scot; Morgan, Terry; Paulson, David; Salzman, Sonja; Rogers, David

    2010-09-30

    Environmental Surveillance at Los Alamos reports are prepared annually by the Los Alamos National Laboratory (the Laboratory) environmental organization, as required by US Department of Energy Order 5400.1, General Environmental Protection Program, and US Department of Energy Order 231.1A, Environment, Safety, and Health Reporting. These annual reports summarize environmental data that are used to determine compliance with applicable federal, state, and local environmental laws and regulations, executive orders, and departmental policies. Additional data, beyond the minimum required, are also gathered and reported as part of the Laboratory’s efforts to ensure public safety and to monitor environmental quality at and near the Laboratory. Chapter 1 provides an overview of the Laboratory’s major environmental programs and explains the risks and the actions taken to reduce risks at the Laboratory from environmental legacies and waste management operations. Chapter 2 reports the Laboratory’s compliance status for 2009. Chapter 3 provides a summary of the maximum radiological dose the public and biota populations could have potentially received from Laboratory operations and discusses chemical exposures. The environmental surveillance and monitoring data are organized by environmental media (air in Chapter 4; water and sediments in Chapters 5 and 6; soils in Chapter 7; and foodstuffs and biota in Chapter 8) in a format to meet the needs of a general and scientific audience. Chapter 9 provides a summary of the status of environmental restoration work around LANL. The new Chapter 10 describes the Laboratory’s environmental stewardship efforts and provides an overview of the health of the Rio Grande. A glossary and a list of acronyms and abbreviations are in the back of the report. Appendix A explains the standards for environmental contaminants, Appendix B explains the units of measurements used in this report, Appendix C describes the Laboratory’s technical

  13. Environmental surveillance at Los Alamos during 2005

    SciTech Connect

    2006-09-30

    Environmental Surveillance at Los Alamos reports are prepared annually by the Los Alamos National Laboratory (LANL or the Laboratory) environmental organization, as required by US Department of Energy Order 5400.1, General Environmental Protection Program, and US Department of Energy Order 231.IA, Environment, Safety, and Health Reporting. These annual reports summarize environmental data that are used to determine compliance with applicable federal, state, and local environmental laws and regulations, executive orders, and departmental policies. Additional data, beyond the minimum required, are also gathered and reported as part of the Laboratory's efforts to ensure public safety and to monitor environmental quality at and near the Laboratory. Chapter 1 provides an overview of the Laboratory's major environmental programs. Chapter 2 reports the Laboratory's compliance status for 2005. Chapter 3 provides a summary of the maximum radiological dose the public and biota populations could have potentially received from Laboratory operations. The environmental surveillance and monitoring data are organized by environmental media (Chapter 4, Air; Chapters 5 and 6, Water and Sediments; Chapter 7, Soils; and Chapter 8, Foodstuffs and Biota) in a format to meet the needs of a general and scientific audience. Chapter 9, new for this year, provides a summary of the status of environmental restoration work around LANL. A glossary and a list ofacronyms and abbreviations are in the back of the report. Appendix A explains the standards for environmental contaminants, Appendix B explains the units of measurements used in this report, Appendix C describes the Laboratory's technical areas and their associated programs, and Appendix D provides web links to more information.

  14. Practice, science and governance in interaction: European effort for the system-wide implementation of the International Classification of Functioning, Disability and Health (ICF) in Physical and Rehabilitation Medicine.

    PubMed

    Stucki, Gerold; Zampolini, Mauro; Juocevicius, Alvydas; Negrini, Stefano; Christodoulou, Nicolas

    2016-11-24

    Since its launch in 2001, relevant international, regional and national PRM bodies have aimed to implement the International Classification of Functioning, Disability and Health (ICF) in Physical and Rehabilitation Medicine (PRM), whereby contributing to the development of suitable practical tools. These tools are available for implementing the ICF in day-to-day clinical practice, standardized reporting of functioning outcomes in quality management and research, and guiding evidence-informed policy. Educational efforts have reinforced PRM physicians' and other rehabilitation professionals' ICF knowledge, and numerous implementation projects have explored how the ICF is applied in clinical practice, research and policy. Largely lacking though is the system-wide implementation of ICF in day-to-day practice across all rehabilitation services of national health systems. In Europe, system-wide implementation of ICF requires the interaction between practice, science and governance. Considering its mandate, the UEMS PRM Section and Board have decided to lead a European effort towards system-wide ICF implementation in PRM, rehabilitation and health care at large, in interaction with governments, non-governmental actors and the private sector, and aligned with ISPRM's collaboration plan with WHO. In this paper we present the current PRM internal and external policy agenda towards system-wide ICF implementation and the corresponding implementation action plan, while highlighting priority action steps - promotion of ICF-based standardized reporting in national quality management and assurance programs, development of unambiguous rehabilitation service descriptions using the International Classification System for Service Organization in Health-related Rehabilitation, development of Clinical Assessment Schedules, qualitative linkage and quantitative mapping of data to the ICF, and the cultural adaptation of the ICF Clinical Data Collection Tool in European languages.

  15. National Ignition Facility Quality Assurance Program Plan. Revision 1

    SciTech Connect

    Wolfe, C.R.; Yatabe, J.

    1996-09-01

    The National Ignition Facility (NIF) is a key constituent of the Department of Energy`s Stockpile Stewardship Program. The NIF will use inertial confinement fusion (ICF) to produce ignition and energy gain in ICF targets, and will perform weapons physics and high-energy- density experiments in support of national security and civilian objectives. The NIF Project is a national facility involving the collaboration of several DOE laboratories and subcontractors, including Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), Sandia National Laboratory (SNL), and the University of Rochester Laboratory for Laser Energetics (UR/LLE). The primary mission of the NIF Project is the construction and start-up operation of laser-based facilities that will demonstrate fusion ignition in the laboratory to provide nuclear-weapons-related physics data, and secondarily, to propagate fusion burn aimed at developing a potential source of civilian energy. To support the accomplishment of this very important mission, the LLNL Laser Directorate created the NIF Project Office to organize and bring about the Project. The NIF Project Office has established this Quality Assurance Program to ensure its success. This issue of the Quality Assurance Program Plan (QAPP) adds the requirements for the conduct of Title 11 design, construction, procurement, and Title III engineering. This QAPP defines and describes the program-the management system-for specifying, achieving, and assuring the quality of all NIF Project work consistent with the policies of the Laboratory and the Laser Directorate.

  16. Los Alamos Advanced Free-Electron Laser

    SciTech Connect

    Chan, K.C.D.; Kraus, R.H.; Ledford, J.; Meier, K.L.; Meyer, R.E.; Nguyen, D.; Sheffield, R.L.; Sigler, F.L.; Young, L.M.; Wang, T.S.; Wilson, W.L.; Wood, R.L.

    1991-01-01

    At Los Alamos, we are building a free-electron laser (FEL) for industrial, medical, and research applications. This FEL, which will incorporate many of the new technologies developed over the last decade, will be compact in size, robust, and user-friendly. Electrons produced by a photocathode will be accelerated to 20 MeV by a high-brightness accelerator and transported using permanent-magnet quadrupoles and dipoles. They will form an electron beam with an excellent instantaneous beam quality of 10 {pi} mm mrad in transverse emittance and 0.3% in energy spread at a peak current up to 300 A. Including operation at higher harmonics, the laser wavelength extends form 3.7 {mu}m to 0.4 {mu}m. In this paper, we will describe the project and the programs to date. 10 refs., 10 figs., 1 tab.

  17. Environmental surveillance at Los Alamos during 1979

    SciTech Connect

    Not Available

    1980-04-01

    This report documents the environmental surveillance program conducted by the Los Alamos Scientific Laboratory (LASL) in 1979. Routine monitoring for radiation and radioactive or chemical substances was conducted on the Laboratory site and in the surrounding region to determine compliance with appropriate standards and permit early identification of possible undesirable trends. Results and interpretation of the data for 1979 on penetrating radiation, chemical and radiochemical quality of ambient air, surface and ground water, municipal water supply, soils and sediments, food, and airborne and liquid effluents are included. Comparisons with appropriate standards and regulations or with background levels from natural or other non-LASL sources provide a basis for concluding that environmental effects attributable to LASL operations are minor and cannot be considered likely to result in any hazard to the population of the area. Results of several special studies provide documentation of some unique environmental conditions in the LASL environs.

  18. Environmental surveillance at Los Alamos during 1987

    SciTech Connect

    Not Available

    1988-05-01

    This report describes the environmental surveillance program conducted by Los Alamos National Laboratory during 1987. Routine monitoring for radiation and radioactive or chemical materials is conducted on the Laboratory site as well as in the surrounding region. Monitoring results are used to determine compliance with appropriate standards and to permit early identification of potentially undesirable trends. Results and interpretation of data for 1987 cover: external penetrating radiation; quantities of airborne emissions and liquid effluents; concentrations of chemicals and radionuclides in ambient air, surface and ground waters, municipal water supply, soils and sediments, and foodstuffs; and environmental compliance. Comparisons with appropriate standards, regulations, and background levels provide the basis for concluding that environmental effects from Laboratory operations are insignificant and do not pose a threat to the public, Laboratory employees, or the environment. 113 refs., 33 figs., 120 tabs.

  19. Environmental surveillance at Los Alamos during 1989

    SciTech Connect

    Not Available

    1990-12-01

    This report describes the environmental surveillance program conducted by Los Alamos National Laboratory during 1989. Routine monitoring for radiation and radioactive or chemical materials is conducted on the Laboratory site as well as in the surrounding region. Monitoring results are used to determine compliance with appropriate standards and to permit early identification of potentially undesirable trends. Results and interpretation of data for 1989 cover external penetrating radiation; quantities of airborne emissions and effluents; concentrations of chemicals and radionuclides in ambient air, surface and ground waters, municipal water supply, soils and sediments, and foodstuffs; and environmental compliance. Comparisons with appropriate standards, regulations, and background levels provide the basis for concluding that environmental effects from Laboratory operations are small and do not pose a threat to the public, Laboratory employees, or the environment. 58 refs., 31 figs., 39 tabs.

  20. Environmental surveillance at Los Alamos during 1995

    SciTech Connect

    1996-10-01

    This report describes the environmental surveillance program at Los Alamos National Laboratory (LANL or the Laboratory) during 1995. The Laboratory routinely monitors for radiation and for radioactive and nonradioactive materials at (or on) Laboratory sites as well as in the surrounding region. LANL uses the monitoring result to determine compliance with appropriate standards and to identify potentially undesirable trends. Data were collected in 1995 to assess external penetrating radiation; quantities of airborne emissions and liquid effluents; concentrations of chemicals and radionuclides in ambient air, surface waters and groundwaters, municipal water supply, soils and sediments, and foodstuffs; and environmental compliance. Using comparisons with standards, regulations, and background levels, this report concludes that environmental effects from Laboratory operations are small and do not pose a demonstrable threat to the public, Laboratory employees, or the environment.

  1. Environmental surveillance at Los Alamos during 1992

    SciTech Connect

    Kohen, K.; Stoker, A.; Stone, G.

    1994-07-01

    This report describes the environmental surveillance program at Los Alamos National Laboratory during 1992. The Laboratory routinely monitors for radiation and for radioactive and nonradioactive materials at (or on) Laboratory sites as well as in the surrounding region. LANL uses the monitoring results to determine compliance with appropriate standards and to identify potentially undesirable trends. Data were collected in 1992 to assess external penetrating radiation; quantities of airborne emissions and liquid effluents; concentrations of chemicals and radionuclides in ambient air, surface waters and groundwaters, municipal water supply, soils and sediments, and foodstuffs; and environmental compliance. Using comparisons with standards, regulations, and background levels, this report concludes that environmental effects from Laboratory operations are small and do not pose a demonstrable threat to the public, laboratory employees, or the environment.

  2. The engineering institute of Los Alamos National Laboratory

    SciTech Connect

    Farrar, Charles R; Park, Gyuhae; Cornwell, Phillip J; Todd, Michael D

    2008-01-01

    Los Alamos National Laboratory (LANL) and the University of California, San Diego (UCSD) have taken the unprecedented step of creating a collaborative, multi-disciplinary graduate education program and associated research agenda called the Engineering Institute. The mission of the Engineering Institute is to develop a comprehensive approach for conducting LANL mission-driven, multidisciplinary engineering research and to improve recruiting, revitalization, and retention of the current and future staff necessary to support the LANL' s national security responsibilities. The components of the Engineering Institute are (1) a joint LANL/UCSD degree program, (2) joint LANL/UCSD research projects, (3) the Los Alamos Dynamic Summer School, (4) an annual workshop, and (5) industry short courses. This program is a possible model for future industry/government interactions with university partners.

  3. Experiments in ICF, materials science, and astrophysics

    NASA Astrophysics Data System (ADS)

    Remington, Bruce A.

    2016-10-01

    We have been developing RED experiments on high power TCF lasers over the past two decades that span (1) the radiative hydrodynamics of TCF capsule physics; (2) the high pressure, high strain rate, solid-state dynamics relevant to novel concepts for ICF and hypervelocity impacts in space and on Earth; and (3) the shock driven turbulence of exploding stars (supernovae). These different regimes are separated by many orders of magnitude in length, time, and temperature, yet there are common threads that run through all of these phenomena, such as the occurrence of hydrodynamic instabilities. Examples from each of these three seemingly very disparate regimes are given, and the common theme of hydrodynamic instability evolution is explored.

  4. The Edward Teller medal lecture: The evolution toward Indirect Drive and two decades of progress toward ICF ignition and burn

    SciTech Connect

    Lindl, J.D.

    1993-12-01

    In 1972, I joined the Livermore ICF Theory and Target Design group led by John Nuckolls, shortly after publication of John`s seminal Nature article on ICF. My primary role, working with others in the target design program including Mordy Rosen, Steve Haan, and Larry Suter, has been as a target designer and theorist who utilized the LASNEX code to perform numerical experiments, which along with analysis of laboratory and underground thermonuclear experiments allowed me to develop a series of models and physical insights which have been used to set the direction and priorities of the Livermore program. I have had the good fortune of working with an outstanding team of scientists who have established LLNL as the premier ICF laboratory in the world. John Emmett and the LLNL Laser Science team were responsible for developing a series of lasers from Janus to Nova which have given LLNL unequaled facilities. George Zimmerman and the LASNEX group developed the numerical models essential for projecting future performance and requirements as well as for designing and analyzing the experiments. Bill Kruer, Bruce Langdon and others in the plasma theory group developed the fundamental understanding of laser plasma interactions which have played such an important role in ICF. And a series of experiment program leaders including Mike Campbell and Joe Kilkenny and their laser experimental teams developed the experimental techniques and diagnostic capabilities which have allowed us to c increasingly complex and sophisticated experiments.

  5. [Los Alamos National Laboratory industrial applications and technology transfer

    SciTech Connect

    Not Available

    1992-09-30

    In October 1989, the Los Alamos Economic Development Corporation (LAEDC) entered into a contract with the Industrial Applications office (IAO) of Los Alamos National Laboratory (LANL) whereby the LAEDC was to provide support services to IAO. More specifically, according to the Statement of Work in this contract The Los Alamos Economic Development Corporation shall assist the Los Alamos National Laboratory Industrial Applications Office in establishing and strengthening connections between potential entrepreneurs at the Laboratory and the business assistance community throughout New Mexico, directed toward enhancing the number, of successful start up businesses spinning off the Laboratory's technology base.'' As part of this contract and subsequent modifications thereof, the LAEDC was to perform seven tasks: 1. Provide business planning assistance to potential entrepreneurs. 2. (Assist IAO in preparing and distributing) informational materials on technology transfer. 3. (Organize and manage) meetings and seminars on technology transfer and entrepreneurship. 4. Identify new opportunities for technology transfer. 5. (Identify and implement programs for the) recognition of Laboratory Entrepreneurs. 6. Training Lab personnel, in the area of technology transfer and Laboratory industrial interactions. 7. Review and summarize prior New Mexico economic development studies. The purpose of this report, is to summarize the accomplishments of the LAEDC under its contract with IAO, and to fulfill its reporting requirements. This report covers the period from October 1989 to September 1992.

  6. Los Alamos Science: Number 16

    SciTech Connect

    Cooper, N.G.

    1988-01-01

    It was an unusually stimulating day and a half at Los Alamos when two Nobel Laureates in physiology, a leading paleontologist, and a leading bio-astrophysicist came together to discuss ''Unsolved Problems in the Science of Life,'' the topic of the second in a series of special meetings sponsored by the Fellows of the Laboratory. Just like the first one on ''Creativity in Science,'' this colloquium took us into a broader arena of ideas and viewpoints than is our usual daily fare. To contemplate the evolution and mysteries of intelligent life from the speakers' diverse points of view at one time, in one place was indeed a rare experience.

  7. Health measurement using the ICF: Test-retest reliability study of ICF codes and qualifiers in geriatric care

    PubMed Central

    Okochi, Jiro; Utsunomiya, Sakiko; Takahashi, Tai

    2005-01-01

    Background The International Classification of Functioning, Disability and Health (ICF) was published by the World Health Organization (WHO) to standardize descriptions of health and disability. Little is known about the reliability and clinical relevance of measurements using the ICF and its qualifiers. This study examines the test-retest reliability of ICF codes, and the rate of immeasurability in long-term care settings of the elderly to evaluate the clinical applicability of the ICF and its qualifiers, and the ICF checklist. Methods Reliability of 85 body function (BF) items and 152 activity and participation (AP) items of the ICF was studied using a test-retest procedure with a sample of 742 elderly persons from 59 institutional and at home care service centers. Test-retest reliability was estimated using the weighted kappa statistic. The clinical relevance of the ICF was estimated by calculating immeasurability rate. The effect of the measurement settings and evaluators' experience was analyzed by stratification of these variables. The properties of each item were evaluated using both the kappa statistic and immeasurability rate to assess the clinical applicability of WHO's ICF checklist in the elderly care setting. Results The median of the weighted kappa statistics of 85 BF and 152 AP items were 0.46 and 0.55 respectively. The reproducibility statistics improved when the measurements were performed by experienced evaluators. Some chapters such as genitourinary and reproductive functions in the BF domain and major life area in the AP domain contained more items with lower test-retest reliability measures and rated as immeasurable than in the other chapters. Some items in the ICF checklist were rated as unreliable and immeasurable. Conclusion The reliability of the ICF codes when measured with the current ICF qualifiers is relatively low. The result in increase in reliability according to evaluators' experience suggests proper education will have positive

  8. Overview of laser technology at Los Alamos National Laboratory

    NASA Astrophysics Data System (ADS)

    Lewis, G. K.; Cremers, D. A.

    Los Alamos National Laboratory has had a long history of involvement in laser sciences and has been recognized both for its large laser programs and smaller scale developments in laser technology and applications. The first significant program was with the Rover nuclear-based rocket propulsion system in 1968 to study laser initiated fusion. From here applications spread to programs in laser isotope separation and development of large lasers for fusion. These programs established the technological human resource base of highly trained laser physicists, engineers, and chemists that remain at the Laboratory today. Almost every technical division at Los Alamos now has some laser capability ranging from laser development, applications, studies on nonlinear processes, modeling and materials processing. During the past six years over eight R&D-100 Awards have been received by Los Alamos for development of laser-based techniques and instrumentation. Outstanding examples of technology developed include LIDAR applications to environmental monitoring, single molecule detection using fluorescence spectroscopy, a laser-based high kinetic energy source of oxygen atoms produced by a laser-sustained plasma, laser-induced breakdown spectroscopy (LIBS) for compositional, analysis, thin film high temperature superconductor deposition, multi-station laser welding, and direct metal deposition and build-up of components by fusing powder particles with a laser beam.

  9. Overview of laser technology at Los Alamos National Laboratory

    SciTech Connect

    Lewis, G.K.; Cremers, D.A.

    1994-09-01

    Los Alamos National Laboratory has had a long history of involvement in laser sciences and has been recognized both for its large laser programs and smaller scale developments in laser technology and applications. The first significant program was with the Rover nuclear-based rocket propulsion system in 1968 to study laser initiated fusion. From here applications spread to programs in laser isotope separation and development of large lasers for fusion. These programs established the technological human resource base of highly trained laser physicists, engineers, and chemists that remain at the Laboratory today. Almost every technical division at Los Alamos now has some laser capability ranging from laser development, applications, studies on nonlinear processes, modeling and materials processing. During the past six years over eight R&D-100 Awards have been received by Los Alamos for development of laser-based techniques and instrumentation. Outstanding examples of technology developed include LIDAR applications to environmental monitoring, single molecule detection using fluorescence spectroscopy, a laser-based high kinetic energy source of oxygen atoms produced by a laser-sustained plasma, laser-induced breakdown spectroscopy (LIBS) for compositional, analysis, thin film high temperature superconductor deposition, multi-station laser welding, and direct metal deposition and build-up of components by fusing powder particles with a laser beam.

  10. The Health and Functioning ICF-60: Development and Psychometric Properties

    PubMed Central

    Tutelyan, V A; Chatterji, S; Baturin, A K; Pogozheva, A V; Kishko, O N; Akolzina, S E

    2014-01-01

    Background This paper describes the development and psychometric properties of the Health and Functioning ICF-60 (HF-ICF-60) measure, based on the World Health Organization (WHO) ‘International Classification of Functioning, Disability and Health: ICF’ (2001). The aims of the present study were to test psychometric properties of the HF-ICF-60, developed as a measure that would be responsive to change in functioning through changes in health and nutritional status, as a prospective measure to monitor health and nutritional status of populations and to explore the relationship of the HF-ICF-60 with quality of life measures such as the World Health Organization WHOQOL-BREF quality of life assessment in relation to non-communicable diseases. Methods The HF-ICF-60 measure consists of 60 items selected from the ICF by an expert panel, which included 18 items that cover Body Functions, 21 items that cover Activities and Participation, rated on five-point scales, and 21 items that cover Environmental Factors (seven items cover Individual Environmental Factors and 14 items cover Societal Environmental Factors), rated on nine-point scales. The HF-ICF-60 measure was administered to the Russian nationally representative sample within the Russian National Population Quality of Life, Health and Nutrition Survey, in 2004 (n = 9807) and 2005 (n = 9560), as part of the two waves of the Russian Longitudinal Monitoring Survey (RLMS). The statistical analyses were carried out with the use of both classical and modern psychometric methods, such as factor analysis, and based on Item Response Theory, respectively. Results The HF-ICF-60 questionnaire is a new measure derived directly from the ICF and covers the ICF components as follows: Body Functions, Activities and Participation, and Environmental Factors (Individual Environmental Factors and Societal Environmental Factors). The results from the factor analyses (both Exploratory Factor Analyses and Confirmatory Factor

  11. [Los Alamos National Laboratory industrial applications and technology transfer

    SciTech Connect

    Not Available

    1991-10-31

    This report summarizes the accomplishments of the Los Alamos Economic Development Corporation (LAEDC) under its contract with the Industrial Applications Office (IAO). The LAEDC has: provided business planning assistance to potential entrepreneurs, assisted IAO in preparing and distributing informational materials on technology, organized and managed meetings and seminars on technology transfer and entrepreneurship, identified new opportunities for technology transfer, and identified and implemented programs for the recognition of Laboratory entrepreneurs.

  12. Isentropic Compression Studies at the Los Alamos National High Magnetic Field Laboratory

    DTIC Science & Technology

    2011-06-01

    actinide samples in extremes of high magnetic field (to 300 Tesla) [1, 2]. A simple modification to the single-turn magnet has converted it to a fast...Isentropic Compression Studies At The Los Alamos National High Magnetic Field Laboratory 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT ...Laboratory (NHMFL) at Los Alamos was originally designed to study actinide samples in extremes of high magnetic field (to 300 Tesla) [1, 2]. A simple

  13. ICF gamma-ray reaction history diagnostics

    NASA Astrophysics Data System (ADS)

    Herrmann, H. W.; Young, C. S.; Mack, J. M.; Kim, Y. H.; McEvoy, A.; Evans, S.; Sedillo, T.; Batha, S.; Schmitt, M.; Wilson, D. C.; Langenbrunner, J. R.; Malone, R.; Kaufman, M. I.; Cox, B. C.; Frogget, B.; Miller, E. K.; Ali, Z. A.; Tunnell, T. W.; Stoeffl, W.; Horsfield, C. J.; Rubery, M.

    2010-08-01

    Reaction history measurements, such as nuclear bang time and burn width, are fundamental components of diagnosing ICF implosions and will be employed to help steer the National Ignition Facility (NIF) towards ignition. Fusion gammas provide a direct measure of nuclear interaction rate (unlike x-rays) without being compromised by Doppler spreading (unlike neutrons). Gas Cherenkov Detectors that convert fusion gamma rays to UV/visible Cherenkov photons for collection by fast optical recording systems have established their usefulness in illuminating ICF physics in several experimental campaigns at OMEGA. In particular, bang time precision better than 25 ps has been demonstrated, well below the 50 ps accuracy requirement defined by the NIF. NIF Gamma Reaction History (GRH) diagnostics are being developed based on optimization of sensitivity, bandwidth, dynamic range, cost, and NIF-specific logistics, requirements and extreme radiation environment. Implementation will occur in two phases. The first phase consists of four channels mounted to the outside of the target chamber at ~6 m from target chamber center (GRH-6m) coupled to ultra-fast photo-multiplier tubes (PMT). This system is intended to operate in the 1013-1017 neutron yield range expected during the early THD campaign. It will have high enough bandwidth to provide accurate bang times and burn widths for the expected THD reaction histories (> 80 ps fwhm). Successful operation of the first GRH-6m channel has been demonstrated at OMEGA, allowing a verification of instrument sensitivity, timing and EMI/background suppression. The second phase will consist of several channels located just inside the target bay shield wall at 15 m from target chamber center (GRH-15m) with optical paths leading through the cement shield wall to well-shielded streak cameras and PMTs. This system is intended to operate in the 1016-1020 yield range expected during the DT ignition campaign, providing higher temporal resolution for the

  14. Audit of the radioactive liquid waste treatment facility operations at the Los Alamos National Laboratory

    SciTech Connect

    1997-11-19

    Los Alamos National Laboratory (Los Alamos) generates radioactive and liquid wastes that must be treated before being discharged to the environment. Presently, the liquid wastes are treated in the Radioactive Liquid Waste Treatment Facility (Treatment Facility), which is over 30 years old and in need of repair or replacement. However, there are various ways to satisfy the treatment need. The objective of the audit was to determine whether Los Alamos cost effectively managed its Treatment Facility operations. The audit determined that Los Alamos` treatment costs were significantly higher when compared to similar costs incurred by the private sector. This situation occurred because Los Alamos did not perform a complete analysis of privatization or prepare a {open_quotes}make-or-buy{close_quotes} plan for its treatment operations, although a {open_quotes}make-or-buy{close_quotes} plan requirement was incorporated into the contract in 1996. As a result, Los Alamos may be spending $2.15 million more than necessary each year and could needlessly spend $10.75 million over the next five years to treat its radioactive liquid waste. In addition, Los Alamos has proposed to spend $13 million for a new treatment facility that may not be needed if privatization proves to be a cost effective alternative. We recommended that the Manager, Albuquerque Operations Office (Albuquerque), (1) require Los Alamos to prepare a {open_quotes}make-or-buy{close_quotes} plan for its radioactive liquid waste treatment operations, (2) review the plan for approval, and (3) direct Los Alamos to select the most cost effective method of operations while also considering other factors such as mission support, reliability, and long-term program needs. Albuquerque concurred with the recommendations.

  15. Los Alamos PC estimating system

    SciTech Connect

    Stutz, R.A.; Lemon, G.D.

    1987-01-01

    The Los Alamos Cost Estimating System (QUEST) is being converted to run on IBM personal computers. This very extensive estimating system is capable of supporting cost estimators from many different and varied fields. QUEST does not dictate any fixed method for estimating. QUEST supports many styles and levels of detail estimating. QUEST can be used with or without data bases. This system allows the estimator to provide reports based on levels of detail defined by combining work breakdown structures. QUEST provides a set of tools for doing any type of estimate without forcing the estimator to use any given method. The level of detail in the estimate can be mixed based on the amount of information known about different parts of the project. The system can support many different data bases simultaneously. Estimators can modify any cost in any data base.

  16. Environmental Surveillance at Los Alamos during 2007

    SciTech Connect

    2008-09-30

    Environmental Surveillance at Los Alamos reports are prepared annually by the Los Alamos National Laboratory (the Laboratory) Environmental Directorate, as required by US Department of Energy Order 450.1, General Environmental Protection Program, and US Department of Energy Order 231.1A, Environment, Safety, and Health Reporting. These annual reports summarize environmental data that are used to determine compliance with applicable federal, state, and local environmental laws and regulations, executive orders, and departmental policies. Additional data, beyond the minimum required, are also gathered and reported as part of the Laboratory’s efforts to ensure public safety and to monitor environmental quality at and near the Laboratory. Chapter 1 provides an overview of the Laboratory’s major environmental programs and explains the risks and the actions taken to reduce risks at the Laboratory from environmental legacies and waste management operations. Chapter 2 reports the Laboratory’s compliance status for 2007. Chapter 3 provides a summary of the maximum radiological dose the public and biota populations could have potentially received from Laboratory operations and discusses chemical exposures. The environmental surveillance and monitoring data are organized by environmental media (Chapter 4, air; Chapters 5 and 6, water and sediments; Chapter 7, soils; and Chapter 8, foodstuffs and biota) in a format to meet the needs of a general and scientific audience. Chapter 9 provides a summary of the status of environmental restoration work around LANL. A glossary and a list of acronyms and abbreviations are in the back of the report. Appendix A explains the standards for environmental contaminants, Appendix B explains the units of measurements used in this report, Appendix C describes the laboratory’s technical areas and their associated programs, and Appendix D provides web links to more information. In printed copies of this report or Executive Summary, we have

  17. The ICF Status and Plans in the United States

    SciTech Connect

    Moses, E; Miller, G; Kauffman, R

    2005-10-12

    The United States continues to maintain its leadership in ICF as it moves toward the goal of ignition. The flagship of the program is the National Ignition Facility (NIF) presently under construction at LLNL. Experiments had begun on the first four beams of the National Ignition Facility just at the time of the last IFSA Conference. Several new successful campaigns have been conducted since then in planar hydrodynamics and hohlraums as well as activating the VISAR diagnostic for equation of state experiments. Highlights of these results will be reviewed. Presently, the four beam experimental capability has been suspended while the first eight beams are being installed as the first step in building out the project. Meanwhile, much progress has been made in developing ignition designs for using NIF. An array of designs having several ablator materials have been shown computationally to ignite with energies ranging from the design energy to as low as 1 MJ of laser energy. Alternative direct drive designs in the NIF indirect drive configuration have been developed by LLE. This wide array of design choices has increased the chance of achieving ignition sooner on the facility. Plans are now being developed to begin an ignition experimental campaign on NIF in 2010, a little over a year after completion of the facility. Other US facilities are also implementing improved capabilities. Petawatt lasers are now under construction at the University of Rochester and Sandia National Laboratory. The Z pulsed power machine at Sandia National Laboratory is being refurbished to improve its performance. The ongoing research program at the OMEGA laser at the University of Rochester and the Z machine at Sandia National Laboratory as well as at the Nike, Trident and Janus lasers remain strong, performing experiments supporting the NIF ignition plan and direct drive ignition. There also is an active program in the broader field of high energy density science on these facilities. These

  18. A review of the Los Alamos effort in the development of nuclear rocket propulsion

    SciTech Connect

    Durham, F.P.; Kirk, W.L.; Bohl, R.J.

    1991-01-01

    This paper reviews the achievements of the Los Alamos nuclear rocket propulsion program and describes some specific reactor design and testing problems encountered during the development program along with the progress made in solving these problems. The relevance of these problems to a renewed nuclear thermal rocket development program for the Space Exploration Initiative (SEI) is discussed. 11 figs.

  19. Penetrating radiation: applications at Los Alamos National Laboratory

    NASA Astrophysics Data System (ADS)

    Watson, Scott; Hunter, James; Morris, Christopher

    2013-09-01

    Los Alamos has used penetrating radiography extensively throughout its history dating back to the Manhattan Project where imaging dense, imploding objects was the subject of intense interest. This interest continues today as major facilities like DARHT1 have become the mainstay of the US Stockpile Stewardship Program2 and the cornerstone of nuclear weapons certification. Meanwhile, emerging threats to national security from cargo containers and improvised explosive devices (IEDs) have invigorated inspection efforts using muon tomography, and compact x-ray radiography. Additionally, unusual environmental threats, like those from underwater oil spills and nuclear power plant accidents, have caused renewed interest in fielding radiography in severe operating conditions. We review the history of penetrating radiography at Los Alamos and survey technologies as presently applied to these important problems.

  20. Tiger Team Assessment of the Los Alamos National Laboratory

    SciTech Connect

    Not Available

    1991-11-01

    This report documents the Tiger Team Assessment of the Los Alamos National Laboratory (LANL) located in Los Alamos, New Mexico. LANL is operated for the US Department of Energy (DOE) by the University of California. The Tiger Team Assessment was conducted from September 23 to November 8, 1991, under the auspices of the DOE Office of Special Projects, Office of Assistant Secretary for Environment, Safety and Health. The assessment was comprehensive, encompassing environmental, safety, and health (ES H) disciplines; management; and contractor and DOE self-assessments. Compliance with applicable Federal, state, and local regulations; applicable DOE Orders; best management practices; and internal LANL site requirements was assessed. In addition, an evaluation of the adequacy and effectiveness of the DOE and the site contractors' management of ES H/quality assurance programs was conducted. This volume discusses findings concerning the environmental assessment.

  1. The Edward Teller Medal Lecture: the Evolution Toward Indirect Drive and Two Decades of Progress Toward Icf Ignition and Burn (lirpp Vol. 11)

    NASA Astrophysics Data System (ADS)

    Lindl, John D.

    2016-10-01

    In 1972, I joined the Livermore ICF Theory and Target Design group led by John Nuckolls, shortly after publication of John's seminal Nature article on ICF. My primary role, working with others in the target design program including Mordy Rosen, Steve Haan, and Larry Suter, has been as a target designer and theorist who utilized the LASNEX code to perform numerical experiments, which along with analysis of laboratory and underground thermonuclear experiments allowed me to develop a series of models and physical insights which have been used to set the direction and priorities of the Livermore program...

  2. Diagnosing ICF gamma-ray physics

    SciTech Connect

    Herrmann, Hans W; Kim, Y H; Mc Evoy, A; Young, C S; Mack, J M; Hoffman, N; Wilson, D C; Langenbrunner, J R; Evans, S; Sedillo, T; Batha, S H; Dauffy, L; Stoeffl, W; Malone, R; Kaufman, M I; Cox, B C; Tunnel, T W; Miller, E K; Rubery, M

    2010-01-01

    Gamma rays produced in an ICF environment open up a host of physics opportunities we are just beginning to explore. A branch of the DT fusion reaction, with a branching ratio on the order of 2e-5 {gamma}/n, produces 16.7 MeV {gamma}-rays. These {gamma}-rays provide a direct measure of fusion reaction rate (unlike x-rays) without being compromised by Doppler spreading (unlike neutrons). Reaction-rate history measurements, such as nuclear bang time and burn width, are fundamental quantities that will be used to optimize ignition on the National Ignition Facility (NIF). Gas Cherenkov Detectors (GCD) that convert fusion {gamma}-rays to UV/visible Cherenkov photons for collection by fast optical recording systems established their usefulness in illuminating ICF physics in several experimental campaigns at OMEGA. Demonstrated absolute timing calibrations allow bang time measurements with accuracy better than 30 ps. System impulse response better than 95 ps fwhm have been made possible by the combination of low temporal dispersion GCDs, ultra-fast microchannel-plate photomultiplier tubes (PMT), and high-bandwidth Mach Zehnder fiber optic data links and digitizers, resulting in burn width measurement accuracy better than 10ps. Inherent variable energy-thresholding capability allows use of GCDs as {gamma}-ray spectrometers to explore other interesting nuclear processes. Recent measurements of the 4.44 MeV {sup 12}C(n,n{prime}) {gamma}-rays produced as 14.1 MeV DT fusion neutrons pass through plastic capsules is paving the way for a new CH ablator areal density measurement. Insertion of various neutron target materials near target chamber center (TCC) producing secondary, neutron-induced {gamma}y-rays are being used to study other nuclear interactions and as in-situ sources to calibrate detector response and DT branching ratio. NIF Gamma Reaction History (GRH) diagnostics, based on the GCD concept, are now being developed based on optimization of sensitivity, bandwidth

  3. 1993 Northern goshawk inventory on portions of Los Alamos National Laboratory, Los Alamos, NM. Final report

    SciTech Connect

    Sinton, D.T.; Kennedy, P.L.

    1994-06-01

    Northern goshawks (Accipiter gentilis) (hereafter referred to as goshawk) is a large forest dwelling hawk. Goshawks may be declining in population and reproduction in the southwestern United States. Reasons for the possible decline in goshawk populations include timber harvesting resulting in the loss of nesting habitat, toxic chemicals, and the effects of drought, fire, and disease. Thus, there is a need to determine their population status and assess impacts of management activities in potential goshawk habitat. Inventory for the goshawk was conducted on 2,254 ha of Los Alamos National Laboratory (LANL) to determine the presence of nesting goshawks on LANL lands. This information can be incorporated into LANL`s environmental management program. The inventory was conducted by Colorado State University personnel from May 12 to July 30, 1993. This report summarizes the results of this inventory.

  4. Tiger Team Assessment of the Los Alamos National Laboratory

    SciTech Connect

    Not Available

    1991-11-01

    The purpose of the safety and health assessment was to determine the effectiveness of representative safety and health programs at the Los Alamos National Laboratory (LANL). Within the safety and health programs at LANL, performance was assessed in the following technical areas: Organization and Administration, Quality Verification, Operations, Maintenance, Training and Certification, Auxiliary Systems, Emergency Preparedness, Technical Support, Packaging and Transportation, Nuclear Criticality Safety, Security/Safety Interface, Experimental Activities, Site/Facility Safety Review, Radiological Protection, Personnel Protection, Worker Safety and Health (OSHA) Compliance, Fire Protection, Aviation Safety, Explosives Safety, Natural Phenomena, and Medical Services.

  5. Sunset at the ALaMO

    NASA Video Gallery

    A new color all-sky camera has opened its eyes at the ALaMO, or Automated Lunar and Meteor Observatory, at NASA's Marshall Space Flight Center in Huntsville, Ala. Watch its inaugural video below, s...

  6. Publications of Los Alamos research 1988

    SciTech Connect

    Varjabedian, K.; Dussart, S.A.; McClary, W.J.; Rich, J.A.

    1989-12-01

    This bibliography lists unclassified publications of work done at the Los Alamos National Laboratory for 1988. The entries, which are subdivided by broad subject categories, are cross-referenced with an author index and a numeric index.

  7. Environmental surveillance at Los Alamos during 1994

    SciTech Connect

    1996-07-01

    This report describes environmental monitoring activities at Los Alamos National Laboratory for 1994. Data were collected to assess external penetrating radiation, airborne emissions, liquid effluents, radioactivity of environmental materials and food stuffs, and environmental compliance.

  8. New Rad Lab for Los Alamos

    ScienceCinema

    None

    2016-07-12

    The topping out ceremony for a key construction stage in the Los Alamos National Laboratory's newest facility, the Radiological Laboratory Utility & Office Building. This is part of the National Nu...  

  9. New Rad Lab for Los Alamos

    SciTech Connect

    2008-08-06

    The topping out ceremony for a key construction stage in the Los Alamos National Laboratory's newest facility, the Radiological Laboratory Utility & Office Building. This is part of the National Nu...  

  10. Edward Teller Returns to LOS Alamos

    NASA Astrophysics Data System (ADS)

    Hecker, Siegfried S.

    2010-01-01

    I was asked to share some reflections of Edward Teller's return to Los Alamos during my directorship. I met Teller late in his life. My comments focus on that time and they will be mostly in the form of stories of my interactions and those of my colleagues with Teller. Although the focus of this symposium is on Teller's contributions to science, at Los Alamos it was never possible to separate Teller's science from policy and controversy ...

  11. Internship at Los Alamos National Laboratory

    SciTech Connect

    Dunham, Ryan Q.

    2012-07-11

    Los Alamos National Laboratory (LANL) is located in Los Alamos, New Mexico. It provides support for our country's nuclear weapon stockpile as well as many other scientific research projects. I am an Undergraduate Student Intern in the Systems Design and Analysis group within the Nuclear Nonproliferation division of the Global Security directorate at LANL. I have been tasked with data analysis and modeling of particles in a fluidized bed system for the capture of carbon dioxide from power plant flue gas.

  12. Saving Water at Los Alamos National Laboratory

    ScienceCinema

    Erickson, Andy

    2016-07-12

    Los Alamos National Laboratory decreased its water usage by 26 percent in 2014, with about one-third of the reduction attributable to using reclaimed water to cool a supercomputing center. The Laboratory's goal during 2014 was to use only re-purposed water to support the mission at the Strategic Computing Complex. Using reclaimed water from the Sanitary Effluent Reclamation Facility, or SERF, substantially decreased water usage and supported the overall mission. SERF collects industrial wastewater and treats it for reuse. The reclamation facility contributed more than 27 million gallons of re-purposed water to the Laboratory's computing center, a secured supercomputing facility that supports the Laboratory’s national security mission and is one of the institution’s larger water users. In addition to the strategic water reuse program at SERF, the Laboratory reduced water use in 2014 by focusing conservation efforts on areas that use the most water, upgrading to water-conserving fixtures, and repairing leaks identified in a biennial survey.

  13. Saving Water at Los Alamos National Laboratory

    SciTech Connect

    Erickson, Andy

    2015-03-16

    Los Alamos National Laboratory decreased its water usage by 26 percent in 2014, with about one-third of the reduction attributable to using reclaimed water to cool a supercomputing center. The Laboratory's goal during 2014 was to use only re-purposed water to support the mission at the Strategic Computing Complex. Using reclaimed water from the Sanitary Effluent Reclamation Facility, or SERF, substantially decreased water usage and supported the overall mission. SERF collects industrial wastewater and treats it for reuse. The reclamation facility contributed more than 27 million gallons of re-purposed water to the Laboratory's computing center, a secured supercomputing facility that supports the Laboratory’s national security mission and is one of the institution’s larger water users. In addition to the strategic water reuse program at SERF, the Laboratory reduced water use in 2014 by focusing conservation efforts on areas that use the most water, upgrading to water-conserving fixtures, and repairing leaks identified in a biennial survey.

  14. Water supply at Los Alamos during 1996. Progress report

    SciTech Connect

    McLin, S.G.; Purtymun, W.D.; Maes, M.N.; Longmire, P.A.

    1997-12-01

    Production of potable municipal water supplies during 1996 totaled about 1,368.1 million gallons from wells in the Guaje, Pajarito, and Otowi well fields. There was no water used from either the spring gallery in Water Canyon or from Guaje Reservoir during 1996. About 2.6 million gallons of water from Los Alamos Reservoir was used for lawn irrigation. The total water usage in 1996 was about 1,370.7 million gallons, or about 131 gallons per day per person living in Los Alamos County. Groundwater pumpage was up about 12.0 million gallons in 1996 compared with the pumpage in 1995. This report fulfills requirements specified in US Department of Energy (DOE) Order 5400.1 (Groundwater Protection Management Program), which requires the Los Alamos National Laboratory (LANL) to monitor and document groundwater conditions below Pajarito Plateau and to protect the regional aquifer from contamination associated with Laboratory operations. Furthermore, this report also fulfills special conditions by providing information on hydrologic characteristics of the regional aquifer, including operating conditions of the municipal water supply system.

  15. Classification of functioning and impairment: the development of ICF core sets for autism spectrum disorder.

    PubMed

    Bölte, Sven; de Schipper, Elles; Robison, John E; Wong, Virginia C N; Selb, Melissa; Singhal, Nidhi; de Vries, Petrus J; Zwaigenbaum, Lonnie

    2014-02-01

    Given the variability seen in Autism Spectrum Disorder (ASD), accurate quantification of functioning is vital to studying outcome and quality of life in affected individuals. The International Classification of Functioning, Disability and Health (ICF) provides a comprehensive, universally accepted framework for the description of health-related functioning. ICF Core Sets are shortlists of ICF categories that are selected to capture those aspects of functioning that are most relevant when describing a person with a specific condition. In this paper, the authors preview the process for developing ICF Core Sets for ASD, a collaboration with the World Health Organization and the ICF Research Branch. The ICF Children and Youth version (ICF-CY) was derived from the ICF and designed to capture the specific situation of the developing child. As ASD affects individuals throughout the life span, and the ICF-CY includes all ICF categories, the ICF-CY will be used in this project ("ICF(-CY)" from now on). The ICF(-CY) categories to be included in the ICF Core Sets for ASD will be determined at an ICF Core Set Consensus Conference, where evidence from four preparatory studies (a systematic review, an expert survey, a patient and caregiver qualitative study, and a clinical cross-sectional study) will be integrated. Comprehensive and Brief ICF Core Sets for ASD will be developed with the goal of providing useful standards for research and clinical practice and generating a common language for functioning and impairment in ASD in different areas of life and across the life span.

  16. Magnetron co-sputtering system for coating ICF targets

    SciTech Connect

    Hsieh, E.J.; Meyer, S.F.; Halsey, W.G.; Jameson, G.T.; Wittmayer, F.J.

    1981-12-09

    Fabrication of Inertial Confinement Fusion (ICF) targets requires deposition of various types of coatings on microspheres. The mechanical strength, and surface finish of the coatings are of concern in ICF experiments. The tensile strength of coatings can be controlled through grain refinement, selective doping and alloy formation. We have constructed a magnetron co-sputtering system to produce variable density profile coatings with high tensile strength on microspheres. The preliminary data on the properties of a Au-Cu binary alloy system by SEM and STEM analysis is presented.

  17. 42 CFR 442.118 - Denial of payments for new admissions to an ICF/MR.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Denial of payments for new admissions to an ICF/MR... of payments for new admissions to an ICF/MR. (a) Basis for denial of payments. The Medicaid agency may deny payment for new admissions to an ICF/MR that no longer meets the applicable conditions...

  18. 42 CFR 440.150 - Intermediate care facility (ICF/MR) services.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Intermediate care facility (ICF/MR) services. 440....150 Intermediate care facility (ICF/MR) services. (a) “ICF/MR services” means those items and services furnished in an intermediate care facility for the mentally retarded if the following conditions are met:...

  19. COBRA accelerator for Sandia ICF diode research at Cornell University

    SciTech Connect

    Smith, D.L.; Ingwersen, P.; Bennett, L.F.; Boyes, J.D.; Anderson, D.E.; Greenly, J.B.; Sudan, R.N.

    1995-05-01

    The new COBRA accelerator is being built in stages at the Laboratory of Plasma Studies in Cornell University where its applications will include extraction diode and ion beam research in support of the light ion inertial confinement fusion (ICF) program at Sandia National Laboratories. The 4- to 5-MV, 125- to 250-kA accelerator is based on a four-cavity inductive voltage adder (IVA) design. It is a combination of new ferromagnetically-isolated cavities and self magnetically insulated transmission line (MITL) hardware and components from existing Sandia and Cornell facilities: Marx generator capacitors, hardware, and power supply from the DEMON facility; water pulse forming lines (PFL) and gas switch from the Subsystem Test Facility (STF); a HERMES-III intermediate store capacitor (ISC); and a modified ion diode from Cornell`s LION. The present accelerator consists of a single modified cavity similar to those of the Sandia SABRE accelerator and will be used to establish an operating system for the first stage initial lower voltage testing. Four new cavities will be fabricated and delivered in the first half of FY96 to complete the COBRA accelerator. COBRA is unique in the sense that each cavity is driven by a single pulse forming line, and the IVA output polarity may be reversed by rotating the cavities 180{degrees} about their vertical axis. The site preparations, tank construction, and diode design and development are taking place at Cornell with growing enthusiasm as this machine becomes a reality. Preliminary results with the single cavity and short positive inner cylinder MITL configuration will soon be available.

  20. COBRA accelerator for Sandia ICF diode research at Cornell University

    NASA Astrophysics Data System (ADS)

    Smith, David L.; Ingwersen, Pete; Bennett, Lawrence F.; Boyes, John D.; Anderson, David E.; Greenly, John B.; Sudan, Ravi N.

    The new COBRA accelerator is being built in stages at the Laboratory of Plasma Studies in Cornell University where its applications will include extraction diode and ion beam research in support of the light ion inertial confinement fusion (ICF) program at Sandia National Laboratories. The 4- to 5-MV, 125- to 250-kA accelerator is based on a four-cavity inductive voltage adder (IVA) design. It is a combination of new ferromagnetically-isolated cavities and self magnetically insulated transmission line (MITL) hardware and components from existing Sandia and Cornell facilities: Marx generator capacitors, hardware, and power supply from the DEMON facility; water pulse forming lines (PFL) and gas switch from the Subsystem Test Facility (STF); a HERMES-3 intermediate store capacitor (ISC); and a modified ion diode from Cornell's LION. The present accelerator consists of a single modified cavity similar to those of the Sandia SABRE accelerator and will be used to establish an operating system for the first stage initial lower voltage testing. Four new cavities will be fabricated and delivered in the first half of FY96 to complete the COBRA accelerator. COBRA is unique in the sense that each cavity is driven by a single pulse forming line, and the IVA output polarity may be reversed by rotating the cavities 180(degrees) about their vertical axis. The site preparations, tank construction, and diode design and development are taking place at Cornell with growing enthusiasm as this machine becomes a reality. Preliminary results with the single cavity and short positive inner cylinder MITL configuration will soon be available.

  1. Kinetic Effects at Material Interfaces in ICF Implosions

    NASA Astrophysics Data System (ADS)

    Wilks, S. C.; Cabot, W.; Whitley, H.; Greenough, J.; Cohen, B. I.; Belof, J.; Zimmerman, G.; Amendt, P. A.; Lepape, S.; Divol, L.; Dimits, A.; Graziani, F.; Molvig, K.; Dodd, E.; Li, C. K.; Petrasso, R.; Laffite, S.; Larroche, O.; Casanova, M.; Masse, L.

    2014-10-01

    The mixing of materials at an interface during an ICF implosion, for example the DT- Carbon interface in an ICF capsule, is a complex process. In general, rad-hydro codes do an excellent job of modeling the important processes during an ICF implosion. However, there are certain times during the implosion when kinetic effects of the ions may play a role in how two materials mix across the interface between them, even in the absence of shocks moving through them. The Knudsen layer effect is one such example. We will describe results of multi-ion species hybrid LSP simulations where the ions are treated kinetically and the electrons are treated as a fluid. We observe that the DT and carbon ions diffuse across the interface in a self-similar manner, at a rate proportional to the square root of time, in agreement with diffusion theory. The resulting ion distributions for each species (on both sides of the interface) will be presented, and the result of this mixing on the yield will be discussed for ICF capsules. Preliminary results of a related mixing that occurs at the gas-hohlraum wall interface will also be presented. Performed under auspices of U.S. DOE by LLNL, Contract DE-AC52-07NA27344. LLNS, LLC.

  2. Experimental Program to Elucidate and Control Stimulated Brillouin and Raman Backscattering in Long-Scale Plasmas

    SciTech Connect

    Fernandez, J.C.; Cobble, J.A.; Montgomery, D.S.; Wilke, M.D.

    1998-10-19

    Laser-plasma instability is a serious concern for indirect-drive inertial confinement fusion (ICF), where laser beams illuminate the interior of a cavity (called a hohlraum) to produce X-rays to drive the implosion of a fusion capsule. Stimulated Raman and Brillouin backscattering (SRS and SBS) could result in unacceptably high laser reflectivities. Unfortunately, it is impossible at present to fully simulate these processes realistically. The authors experimental program aims to understand these instabilities by pursuing a dual strategy. (1) They use a gas-filled hohlraum design, which best approaches ignition-hohlraum conditions, on the Nova laser to identify important non linear trends. (2) They are shifting towards more fundamental experiments with a nearly diffraction-limited interaction laser beam illuminating extremely well characterized plasmas on the Trident laser facility at Los Alamos to probe the relevant fundamental processes.

  3. Bradbury science museum: your window to Los Alamos National Laboratory

    SciTech Connect

    Deck, Linda Theresa

    2009-03-05

    The Bradbury Science Museum is the public's window to Los Alamos National Laboratory and supports the Community Program Office's mission to develop community support to accomplish LANL's national security and science mission. It does this by stimulating interest in and increasing basic knowledge of science and technology in northern New Mexico audiences, and increasing public understanding and appreciation of how LANL science and technology solve our global problems. In performing these prime functions, the Museum also preserves the history of scientific accomplishment at the Lab by collecting and preserving artifacts of scientific and historical importance.

  4. Multi-Fluid Interpenetration Mixing in X-ray and Directly Laser driven ICF Capsule Implosions

    NASA Astrophysics Data System (ADS)

    Wilson, Douglas

    2003-10-01

    Mix between a surrounding shell and the fuel leads to degradation in ICF capsule performance. Both indirectly (X-ray) and directly laser driven implosions provide a wealth of data to test mix models. One model, the multi-fluid interpenetration mix model of Scannapieco and Cheng (Phys. Lett. A., 299, 49, 2002), was implemented in an ICF code and applied to a wide variety of experiments (e.g. J. D. Kilkenny et al., Proc. Conf Plasm. Phys. Contr. Nuc. Fus. Res. 3, 29(1988), P. Amendt, R. E. Turner, O. L. Landen, Phy. Rev. Lett., 89, 165001 (2002), or Li et al., Phy. Rev. Lett, 89, 165002 (2002)). With its single adjustable parameter fixed, it replicates well the yield degradation with increasing convergence ratio for both directly and indirectly driven capsules. Often, but not always the ion temperatures with mixing are calculated to be higher than in an unmixed implosion, agreeing with observations. Comparison with measured directly driven implosion yield rates ( from the neutron temporal diagnostic or NTD) shows mixing increases rapidly during the burn. The model also reproduces the decrease of the fuel "rho-r" with fill gas pressure, measured by observing escaping deuterons or secondary neutrons. The mix model assumes fully atomically mixed constituents, but when experiments with deuterated plastic layers and 3He fuel are modeled, less that full atomic mix is appropriate. Applying the mix model to the ablator - solid DT interface in indirectly driven ignition capsules for the NIF or LMJ suggests that the capsules will ignite, but that burn after ignition may be somewhat degraded. Situations in which the Scannapieco and Cheng model fails to agree with experiments can guide us to improvements or the development of other models. Some directly driven symmetric implosions suggest that in highly mixed situations, a higher value of the mix parameter may needed. Others show the model underestimating the fuel burn temperature. This work was performed by the Los Alamos

  5. ICF Core Set for Head and Neck Cancer: Do the Categories Discriminate Among Clinically Relevant Subgroups of Patients?

    ERIC Educational Resources Information Center

    Tschiesner, Uta; Oberhauser, Cornelia; Cieza, Alarcos

    2011-01-01

    The multidisciplinary assessment of functioning in patients with head and neck cancer (HNC) according to the "ICF Core Set for Head and Neck Cancer" (ICF-HNC) was developed in an international and multi-disciplinary approach. The ICF-HNC is an application of the ICF that was adopted by the World Health Organization. The objective of this study was…

  6. Validation of the comprehensive ICF core set for low back pain: the perspective of physical therapists.

    PubMed

    Kirschneck, Michaela; Kirchberger, Inge; Amann, Edda; Cieza, Alarcos

    2011-08-01

    The "Comprehensive ICF Core Set for Low Back Pain (LBP)" is an application of the International Classification of Functioning, Disability and Health (ICF) and represents the typical spectrum of problems in functioning for patients with LBP. The aim of this study was to validate the Comprehensive ICF Core Set for low back pain from the perspective of physical therapists. Physical therapists experienced in LBP treatment were asked about the patients' problems, patients' resources and aspects of environment treated by physical therapists in a three-round survey using the Delphi technique. Responses were linked to the ICF. Eighty-four physical therapists in 32 countries named 1955 concepts that covered all ICF components. Fourteen ICF categories were not represented in the Comprehensive ICF Core Set for LBP although at least 75% of the participants have rated them as important. Most of them belonged to the ICF component "Body Functions". Twenty-eight concepts were linked to the not-yet-developed ICF component personal factors. Further, 21 issues were not covered by the ICF. The validity of the ICF components "Body Structures", "Activities and Participation" and "Environmental Factors" was largely supported by the physical therapists. However, several body functions were identified which are not covered and need further investigation.

  7. Enabling completion of the material disposition area G closure at the Los Alamos National Laboratory

    SciTech Connect

    Blankenhorn, James Allen; Bishop, Milton L

    2010-01-01

    Los Alamos National Security, LLC (LANS) and the Los Alamos Site Office (LASO) have developed and are implementing an integrated strategy to accelerate the disposition of Los Alamos National Laboratory (LANL) legacy transuranic waste inventory currently stored in Technical Area 54, Material Disposition Area (MDA) G. As that strategy has been implemented the easier waste streams have been certified and shipped leaving the harder more challenging wastes to be dispositioned. Lessons learned from around the complex and a partnership with the National Transuranic Program located in Carlsbad, New Mexico, are enabling this acceleration. The Waste Disposition Program is responsible for the removal of both the above ground and below grade, retrievably stored transuranic waste in time to support the negotiated consent order with the State of New Mexico which requires closure of MDA G by the year 2015. The solutions and strategy employed at LANL are applicable to any organization that is currently managing legacy transuranic waste.

  8. Status of Monte Carlo at Los Alamos

    SciTech Connect

    Thompson, W.L.; Cashwell, E.D.

    1980-01-01

    At Los Alamos the early work of Fermi, von Neumann, and Ulam has been developed and supplemented by many followers, notably Cashwell and Everett, and the main product today is the continuous-energy, general-purpose, generalized-geometry, time-dependent, coupled neutron-photon transport code called MCNP. The Los Alamos Monte Carlo research and development effort is concentrated in Group X-6. MCNP treats an arbitrary three-dimensional configuration of arbitrary materials in geometric cells bounded by first- and second-degree surfaces and some fourth-degree surfaces (elliptical tori). Monte Carlo has evolved into perhaps the main method for radiation transport calculations at Los Alamos. MCNP is used in every technical division at the Laboratory by over 130 users about 600 times a month accounting for nearly 200 hours of CDC-7600 time.

  9. Publications of Los Alamos research 1980

    SciTech Connect

    Salazar, C.A.; Willis, J.K.

    1981-09-01

    This bibliography is a compilation of unclassified publications of work done at the Los Alamos National Laboratory for 1980. Papers published in 1980 are included regardless of when they were actually written. Publications received too late for inclusion in earlier compilations have also been listed. Declassification of previously classified reports is considered to constitute publication. All classified issuances are omitted-even those papers, themselves unclassified, which were published only as part of a classified document. If a paper was pubished more than once, all places of publication are included. The bibliography includes Los Alamos National Laboratory reports, papers released as non-laboratory reports, journal articles, books, chapters of books, conference papers published either separately or as part of conference proceedings issued as books or reports, papers published in congressional hearings, theses, and US patents. Publications by Los Alamos authors that are not records of Laboratory-sponsored work are included when the Library becomes aware of them.

  10. Publications of Los Alamos Research, 1983

    SciTech Connect

    Sheridan, C.J.; McClary, W.J.; Rich, J.A.; Rodriguez, L.L.

    1984-10-01

    This bibliography is a compilation of unclassified publications of work done at the Los Alamos National Laboratory for 1983. Papers published in 1982 are included regardless of when they were actually written. Publications received too late for inclusion in earlier compilations have also been listed. Declassification of previously classified reports is considered to constitute publication. All classified issuances are omitted - even those papers, themselves unclassified, which were published only as part of a classified document. If a paper was published more than once, all places of publication are included. The bibliography includes Los Alamos National Laboratory reports, papers released as non-Laboratory reports, journal articles, books, chapters of books, conference papers either published separately or as part of conference proceedings issued as books or reports, papers publishd in congressional hearings, theses, and US patents. Publications by Los Alamos authors that are not records of Laboratory-sponsored work are included when the Library becomes aware of them.

  11. Water supply at Los Alamos during 1992

    SciTech Connect

    Purtymun, W.D.; McLin, S.G.; Stoker, A.K.; Maes, M.N.

    1995-09-01

    Municipal potable water supply during 1992 was 1,516 {times} 10{sup 6} gallons from wells in the Guaje and Pajarito well fields. About 13 {times} 10{sup 6} gallons were pumped from the Los Alamos Well Field and used in the construction of State Road 501 adjacent to the Field. The last year the Las Alamos Field was used for municipal supply was 1991. The nonpotable water supply used for steam plant support was about 0.12 {times} 10{sup 6} gallons from the spring gallery in Water Canyon. No nonpotable water was used for irrigation from Guaje and Los Alamos Reservoirs. Thus, the total water usage in 1992 was about 1,529 {times} 10{sup 6} gallons. Neither of the two new wells in the Otowi Well Field were operational in 1992.

  12. Mixed low-level waste minimization at Los Alamos

    SciTech Connect

    Starke, T.P.

    1998-12-01

    During the first six months of University of California 98 Fiscal Year (July--December) Los Alamos National Laboratory has achieved a 57% reduction in mixed low-level waste generation. This has been accomplished through a systems approach that identified and minimized the largest MLLW streams. These included surface-contaminated lead, lead-lined gloveboxes, printed circuit boards, and activated fluorescent lamps. Specific waste minimization projects have been initiated to address these streams. In addition, several chemical processing equipment upgrades are being implemented. Use of contaminated lead is planned for several high energy proton beam stop applications and stainless steel encapsulated lead is being evaluated for other radiological control area applications. INEEL is assisting Los Alamos with a complete systems analysis of analytical chemistry derived mixed wastes at the CMR building and with a minimum life-cycle cost standard glovebox design. Funding for waste minimization upgrades has come from several sources: generator programs, waste management, the generator set-aside program, and Defense Programs funding to INEEL.

  13. Recent UCN source developments at Los Alamos

    SciTech Connect

    Seestrom, S.J.; Anaya, J.M.; Bowles, T.J.

    1998-12-01

    The most intense sources of ultra cold neutrons (UCN) have bee built at reactors where the high average thermal neutron flux can overcome the low UCN production rate to achieve usable densities of UCN. At spallation neutron sources the average flux available is much lower than at a reactor, though the peak flux can be comparable or higher. The authors have built a UCN source that attempts to take advantage of the high peak flux available at the short pulse spallation neutron source at the Los Alamos Neutron Science Center (LANSCE) to generate a useful number of UCN. In the source UCN are produced by Doppler-shifted Bragg scattering of neutrons to convert 400-m/s neutrons down into the UCN regime. This source was initially tested in 1996 and various improvements were made based on the results of the 1996 running. These improvements were implemented and tested in 1997. In sections 2 and 3 they discuss the improvements that have been made and the resulting source performance. Recently an even more interesting concept was put forward by Serebrov et al. This involves combining a solid Deuterium UCN source, previously studied by Serebrov et al., with a pulsed spallation source to achieve world record UCN densities. They have initiated a program of calculations and measurements aimed at verifying the solid Deuterium UCN source concept. The approach has been to develop an analytical capability, combine with Monte Carlo calculations of neutron production, and perform benchmark experiments to verify the validity of the calculations. Based on the calculations and measurements they plan to test a modified version of the Serebrov UCN factory. They estimate that they could produce over 1,000 UCN/cc in a 15 liter volume, using 1 {micro}amp of 800 MeV protons for two seconds every 500 seconds. They will discuss the result UCN production measurements in section 4.

  14. Induction inserts at the Los Alamos PSR

    SciTech Connect

    King-Yuen Ng

    2002-09-30

    Ferrite-loaded induction tuners installed in the Los Alamos Proton Storage Ring have been successful in compensating space-charge effects. However, the resistive part of the ferrite introduces unacceptable microwave instability and severe bunch lengthening. An effective cure was found by heating the ferrite cores up to {approx} 130 C. An understanding of the instability and cure is presented.

  15. A Sailor in the Los Alamos Navy

    SciTech Connect

    Judd, D. L.

    2016-12-20

    As part of the War Department’s Manhattan Engineer District (MED), Los Alamos was an Army installation during World War II, complete with a base commander and a brace of MPs. But it was a unique Army installation, having more civilian then military personnel. Even more unique was the work performed by the civilian population, work that required highly educated scientists and engineers. As the breadth, scope, and complexity of the Laboratory’s work increased, more and more technically educated and trained personnel were needed. But, the manpower needs of the nation’s war economy had created a shortage of such people. To meet its manpower needs, the MED scoured the ranks of the Army for anyone who had technical training and reassigned these men to its laboratories, including Los Alamos, as part of its Special Engineer Detachment (SED). Among the SEDs assigned to Los Alamos was Val Fitch, who was awarded the Nobel Prize in Physics in 1980. Another was Al Van Vessem, who helped stack the TNT for the 100 ton test, bolted together the Trinity device, and rode shotgun with the bomb has it was driven from Los Alamos to ground zero.

  16. Evaluation of Macroinvertebrate Communities and Habitat for Selected Stream Reaches at Los Alamos National Laboratory

    SciTech Connect

    L.J. Henne; K.J. Buckley

    2005-08-12

    This is the second aquatic biological monitoring report generated by Los Alamos National Laboratory's (LANL's) Water Quality and Hydrology Group. The study has been conducted to generate impact-based assessments of habitat and water quality for LANL waterways. The monitoring program was designed to allow for the detection of spatial and temporal trends in water and habitat quality through ongoing, biannual monitoring of habitat characteristics and benthic aquatic macroinvertebrate communities at six key sites in Los Alamos, Sandia, Water, Pajarito, and Starmer's Gulch Canyons. Data were collected on aquatic habitat characteristics, channel substrate, and macroinvertebrate communities during 2001 and 2002. Aquatic habitat scores were stable between 2001 and 2002 at all locations except Starmer's Gulch and Pajarito Canyon, which had lower scores in 2002 due to low flow conditions. Channel substrate changes were most evident at the upper Los Alamos and Pajarito study reaches. The macroinvertebrate Stream Condition Index (SCI) indicated moderate to severe impairment at upper Los Alamos Canyon, slight to moderate impairment at upper Sandia Canyon, and little or no impairment at lower Sandia Canyon, Starmer's Gulch, and Pajarito Canyon. Habitat, substrate, and macroinvertebrate data from the site in upper Los Alamos Canyon indicated severe impacts from the Cerro Grande Fire of 2000. Impairment in the macroinvertebrate community at upper Sandia Canyon was probably due to effluent-dominated flow at that site. The minimal impairment SCI scores for the lower Sandia site indicated that water quality improved with distance downstream from the outfall at upper Sandia Canyon.

  17. Stability design considerations for mirror support systems in ICF lasers

    SciTech Connect

    Tietbohl, G.L.; Sommer, S.C.

    1996-10-01

    Some of the major components of laser systems used for Inertial Confinement Fusion (ICF) are the large aperture mirrors which direct the path of the laser. These mirrors are typically supported by systems which consist of mirror mounts, mirror enclosures, superstructures, and foundations. Stability design considerations for the support systems of large aperture mirrors have been developed based on the experience of designing and evaluating similar systems at the Lawrence Livermore National Laboratory (LLNL). Examples of the systems developed at LLNL include Nova, the Petawatt laser, Beamlet, and the National Ignition Facility (NIF). The structural design of support systems of large aperture mirrors has typically been controlled by stability considerations in order for the large laser system to meet its performance requirements for alignment and positioning. This paper will discuss the influence of stability considerations and will provide guidance on the structural design and evaluation of mirror support systems in ICF lasers so that this information can be used on similar systems.

  18. Analysis Of Wetted-Foam ICF Capsule Perormance

    NASA Astrophysics Data System (ADS)

    Peterson, R.; Olson, R.; Zylstra, A.; Haines, B.; Yi, A.; Bradley, P.; Yin, L.; Leeper, R.; Kline, J.

    2016-10-01

    The performance of wetted-foam ICF capsules is investigated with the RAGE Eulerian radiation-hydrodynamics computer code. We are developing an experimental platform on NIF that employs a wetted foam liquid DT fuel layer ICF capsules. By varying the capsule temperature, the vapor density in the capsule can be prescribed, and the hot spot convergence ratio (CR) of the capsule implosion can be controlled. This allows us to investigate the fidelity of RAGE in modeling of capsule implosions as the value of CR is varied. In the NIF experiments, CR can be varied from 12 to 25. This presentation will cover simulations with RAGE of three NIF shots performed in 2016; a DD and a DT liquid fuel shot with CR =14 and a DT shot with CR =16. It will also discuss analysis of future experiments. This work was performed under auspices of the U. S. DOE by LANL.

  19. Effect of inactive impurities on the burning of ICF targets

    SciTech Connect

    Gus'kov, S. Yu.; Il'in, D. V.; Sherman, V. E.

    2011-12-15

    The efficiency of thermonuclear burning of the spherical deuterium-tritium (DT) plasma of inertial confinement fusion (ICF) targets in the presence of low-Z impurities (such as lithium, carbon, or beryllium) with arbitrary concentrations is investigated. The effect of impurities produced due to the mixing of the thermonuclear fuel with the material of the structural elements of the target during its compression on the process of target burning is studied, and the possibility of using solid noncryogenic thermonuclear fuels in ICF targets is analyzed. Analytical dependences of the ignition energy and target thermonuclear gain on the impurity concentration are obtained. The models are constructed for homogeneous and inhomogeneous plasmas for the case in which the burning is initiated in the central heated region of the target and then propagates into the surrounding relatively cold fuel. Two possible configurations of an inhomogeneous plasma, namely, an isobaric configuration formed in the case of spark ignition of the target and an isochoric configuration formed in the case of fast ignition, are considered. The results of numerical simulations of the burning of the DT plasma of ICF targets in a wide range of impurity concentrations are presented. The simulations were performed using the TEPA one-dimensional code, in which the thermonuclear burning kinetics is calculated by the Monte Carlo method. It is shown that the strongest negative effect related to the presence of impurities is an increase in the energy of target ignition. It is substantiated that the most promising solid noncryogenic fuel is DT hydride of beryllium (BeDT). The requirements to the plasma parameters at which BeDT can be used as a fuel in noncryogenic ICF targets are determined. Variants of using noncryogenic targets with a solid thermonuclear fuel are proposed.

  20. FISH analysis on spontaneously arising micronuclei in the ICF syndrome.

    PubMed Central

    Stacey, M; Bennett, M S; Hulten, M

    1995-01-01

    The ICF syndrome is a rare disorder where patients show undercondensation of the heterochromatic blocks of chromosomes 1, 9, and 16 along with variable immunodeficiency. The undercondensation of the heterochromatic block appears to be restricted to a portion of PHA stimulated T cells. Patients with this syndrome also show an increase in micronuclei formation. We have used dual colour FISH to investigate the chromosomal content of these micronuclei in PHA stimulated peripheral blood cultures, an EBV transformed B cell line, and also micronuclei observed in vivo from peripheral blood smears. Chromosome 1 appears to be present in a higher proportion of micronuclei compared to chromosomes 9 and 16 in both a PHA stimulated culture and an EBV transformed cell line. An 18 centromeric probe, not associated with the ICF syndrome, showed no signal in any of the micronuclei observed. The implications from these observations are that the heterochromatic instability in the ICF syndrome is manifested not only in T but also in B cells and that it is present in vivo. Images PMID:7562960

  1. Hybrid-drive implosion system for ICF targets

    DOEpatents

    Mark, James W.

    1988-01-01

    Hybrid-drive implosion systems (20,40) for ICF targets (10,22,42) are described which permit a significant increase in target gain at fixed total driver energy. The ICF target is compressed in two phases, an initial compression phase and a final peak power phase, with each phase driven by a separate, optimized driver. The targets comprise a hollow spherical ablator (12) surroundingly disposed around fusion fuel (14). The ablator is first compressed to higher density by a laser system (24), or by an ion beam system (44), that in each case is optimized for this initial phase of compression of the target. Then, following compression of the ablator, energy is directly delivered into the compressed ablator by an ion beam driver system (30,48) that is optimized for this second phase of operation of the target. The fusion fuel (14) is driven, at high gain, to conditions wherein fusion reactions occur. This phase separation allows hydrodynamic efficiency and energy deposition uniformity to be individually optimized, thereby securing significant advantages in energy gain. In additional embodiments, the same or separate drivers supply energy for ICF target implosion.

  2. Hybrid-drive implosion system for ICF targets

    DOEpatents

    Mark, James W.

    1988-08-02

    Hybrid-drive implosion systems (20,40) for ICF targets (10,22,42) are described which permit a significant increase in target gain at fixed total driver energy. The ICF target is compressed in two phases, an initial compression phase and a final peak power phase, with each phase driven by a separate, optimized driver. The targets comprise a hollow spherical ablator (12) surroundingly disposed around fusion fuel (14). The ablator is first compressed to higher density by a laser system (24), or by an ion beam system (44), that in each case is optimized for this initial phase of compression of the target. Then, following compression of the ablator, energy is directly delivered into the compressed ablator by an ion beam driver system (30,48) that is optimized for this second phase of operation of the target. The fusion fuel (14) is driven, at high gain, to conditions wherein fusion reactions occur. This phase separation allows hydrodynamic efficiency and energy deposition uniformity to be individually optimized, thereby securing significant advantages in energy gain. In additional embodiments, the same or separate drivers supply energy for ICF target implosion.

  3. Hybrid-drive implosion system for ICF targets

    DOEpatents

    Mark, J.W.K.

    1987-10-14

    Hybrid-drive implosion systems for ICF targets are described which permit a significant increase in target gain at fixed total driver energy. The ICF target is compressed in two phases, an initial compression phase and a final peak power phase, with each phase driven by a separate, optimized driver. The targets comprise a hollow spherical ablator surroundingly disposed around fusion fuel. The ablator is first compressed to higher density by a laser system, or by an ion beam system, that in each case is optimized for this initial phase of compression of the target. Then, following compression of the ablator, energy is directly delivered into the compressed ablator by an ion beam driver system that is optimized for this second phase of operation of the target. The fusion fuel is driven, at high gain, to conditions wherein fusion reactions occur. This phase separation allows hydrodynamic efficiency and energy deposition uniformity to be individually optimized, thereby securing significant advantages in energy gain. In additional embodiments, the same or separate drivers supply energy for ICF target implosion. 3 figs.

  4. Audit Report, "Fire Protection Deficiencies at Los Alamos National Laboratory"

    SciTech Connect

    2009-06-01

    The Department of Energy's Los Alamos National Laboratory (Los Alamos) maintains some of the Nation's most important national security assets, including nuclear materials. Many of Los Alamos' facilities are located in close proximity to one another, are occupied by large numbers of contract and Federal employees, and support activities ranging from nuclear weapons design to science-related activities. Safeguarding against fires, regardless of origin, is essential to protecting employees, surrounding communities, and national security assets. On June 1, 2006, Los Alamos National Security, LLC (LANS), became the managing and operating contractor for Los Alamos, under contract with the Department's National Nuclear Security Administration (NNSA). In preparation for assuming its management responsibilities at Los Alamos, LANS conducted walk-downs of the Laboratory's facilities to identify pre-existing deficiencies that could give rise to liability, obligation, loss or damage. The walk-downs, which identified 812 pre-existing fire protection deficiencies, were conducted by subject matter professionals, including fire protection experts. While the Los Alamos Site Office has overall responsibility for the effectiveness of the fire protection program, LANS, as the Laboratory's operating contractor, has a major, day-to-day role in minimizing fire-related risks. The issue of fire protection at Los Alamos is more than theoretical. In May 2000, the 'Cerro Grande' fire burned about 43,000 acres, including 7,700 acres of Laboratory property. Due to the risk posed by fire to the Laboratory's facilities, workforce, and surrounding communities, we initiated this audit to determine whether pre-existing fire protection deficiencies had been addressed. Our review disclosed that LANS had not resolved many of the fire protection deficiencies that had been identified in early 2006: (1) Of the 296 pre-existing deficiencies we selected for audit, 174 (59 percent) had not been corrected

  5. (Experimental development, testing and research work in support of the inertial confinement fusion program)

    SciTech Connect

    Johnson, R.; Luckhardt, R.; Terry, N.; Drake, D.; Gaines, J.

    1990-04-27

    This KMS Fusion Semi-Annual Technical Report covers the period October 1989 through March 1990. It contains a review of work performed by KMS Fusion, Inc. (KMSF), in support of the national program to achieve inertially confined fusion (ICF). A major section of the report is devoted to target technology, a field which is expected to play an increasingly important role in the overall KMSF fusion effort. Among the highlights of our efforts in this area covered in this report are: improvements and new developments in target fabrication techniques, including a discussion of techniques for introducing gaussian bumps and bands on target surfaces. Development of a single automated system for the interferometric characterization of transparent shells. Residual gas analysis of the blowing gases contained in glass shells made from xerogels. These usually include CO{sub 2}, O{sub 2} and N{sub 2}, and are objectionable because they dilute the fuel. Efforts to observe the ice layers formed in the {beta}-layering process in cryogenic targets, and to simulate the formation of these layers. In addition to our work on target technology, we conducted experiments with the Chroma laser and supported the ICF effort at other labs with theoretical and computational support as well as diagnostic development. Included in the work covered in this report are: experiments on Chroma to study interpenetration of and ionization balance in laser generated plasmas. Diagnostic development, including an optical probe for the Aurora laser at Los Alamos National Laboratory, and a high energy x-ray continuum spectrograph for Aurora. Investigation of the radiation cooling instability as a possible mechanism for the generation of relatively cold, dense jets observed in ICF experiments.

  6. [The term "Funktionale Gesundheit" (functional health) in the German edition of the ICF].

    PubMed

    Cibis, W

    2009-07-01

    In the preface of the German edition of the INTERNATIONAL CLASSIFICATION OF FUNCTIONING, DISABILITY AND HEALTH (ICF) the term "functional health" (Funktionale Gesundheit) is introduced and defined. There is no direct equivalent expression in the original English Version of the ICF. The definition of "Funktionale Gesundheit" was thus strongly disputed among the translators and ICF experts involved in the German translation. In the following, the author suggests reconsidering the definition critically and proposes an alternative solution.

  7. Los Alamos National Laboratory support to IAEA environmental safeguards

    SciTech Connect

    Steiner, Robert E; Dry, Don E; Roensch, Fred R; Kinman, Will S; Roach, Jeff L; La Mont, Stephen P

    2010-12-01

    The nuclear and radiochemistry group provides sample preparation and analysis support to the International Atomic Energy Agency (IAEA) Network of Analytical Laboratories (NWAL). These analyses include both non-destructive (alpha and gamma-ray spectrometry) and destructive (thermal ionization mass spectrometry and inductively coupled plasma mass spectrometry) methods. On a bi-annual basis the NWAL laboratories are invited to meet to discuss program evolution and issues. During this meeting each participating laboratory summarizes their efforts over the previous two years. This presentation will present Los Alamos National Laboratories efforts in support of this program. Data showing results from sample and blank analysis will be presented along with capability enhancement and issues that arose over the previous two years.

  8. Los Alamos National Laboratory 1995 self assessment report

    SciTech Connect

    1995-06-30

    The Los Alamos National Laboratory (LANL) Safeguards and Security (S and S) Assurance Program (AP) is designed to ensure the adequacy and effectiveness of the LANL S and S program. The Assurance Program provides a mechanism for discovering deficiencies, determining causes, conducting risk assessments, implementing corrective actions, and documenting the assessment process. Selection of organizations for self assessments is based on the criteria established in the LANL S and S Assurance Program. For FY 1995, 12 organizations were selected for self assessments, these organizations are identified fin the schedule at Appendix A. The S and S topical areas selected for review in each organization varied depending on their security interests and included: Program Planning and Management (PPM); Protection Program Operations (PPO); Material Control and Accountability (MC and A); Computer and Communications Security (COMPSEC and COMSEC); Information Security (INFOSEC); Personnel Security (PERSEC); and Operational Security (OPSEC). The objective was to ascertain the effectiveness of S and S programs in each organization, its formality of operations, and its integration with the overall Laboratory S and S program. The goal was to meet both the DOE self-assessment requirements and the UC performance criteria and document the results.

  9. Cleanup at Los Alamos National Laboratory - the challenges - 9493

    SciTech Connect

    Stiger, Susan G; Hargis, Kenneth M; Graham, Michael J; Rael, George J

    2008-01-01

    This paper provides an overview of environmental cleanup at the Los Alamos National Laboratory (LANL) and some of the unique aspects and challenges. Cleanup of the 65-year old Department of Energy Laboratory is being conducted under a RCRA Consent Order with the State of New Mexico. This agreement is one of the most recent cleanup agreements signed in the DOE complex and was based on lessons learned at other DOE sites. A number of attributes create unique challenges for LANL cleanup -- the proximity to the community and pueblos, the site's topography and geology, and the nature of LANL's on-going missions. This overview paper will set the stage for other papers in this session, including papers that present: Plans to retrieve buried waste at Material Disposal Area B, across the street from oen of Los Alamos' commercial districts and the local newspaper; Progress to date and joint plans with WIPP for disposal of the remaining inventory of legacy transuranic waste; Reviews of both groundwater and surface water contamination and the factors complicating both characterization and remediation; Optimizing the disposal of low-level radioactive waste from ongoing LANL missions; A stakeholder environmental data transparency project (RACER), with full public access to all available information on contamination at LANL, and A description of the approach to waste processing cost recovery from the programs that generate hazardous and radioactive waste at LANL.

  10. Plutonium scrap processing at the Los Alamos Scientific Laboratory

    SciTech Connect

    Nixon, A.E.; McKerley, B.J.; Christensen, E.L.

    1980-01-01

    The Los Alamos Scientific Laboratory currently has the newest plutonium handling facility in the nation. Los Alamos has been active in the processing of plutonium almost since the discovery of this man-made element in 1941. One of the functions of the new facility is the processing of plutonium scrap generated at LASL and other sites. The feed for the scrap processing program is extremely varied, and a wide variety of contaminants are often encountered. Depending upon the scrap matrix and contaminants present, the majority of material receives a nitric acid/hydrofluoric acid or nitric acid/calcium fluoride leach. The plutonium nitrate solutions are then loaded onto an anion exchange column charged with DOWEX 1 x 4, 50 to 100 mesh, nitrate form resin. The column is eluted with 0.48 M hydroxyl amine nitrate. The Pu(NO/sub 3/)/sub 3/ is then precipitated as plutonium III oxalate which is calcined at 450 to 500/sup 0/C to yield a purified PuO/sub 2/ product.

  11. 2013 Los Alamos National Laboratory Hazardous Waste Minimization Report

    SciTech Connect

    Salzman, Sonja L.; English, Charles J.

    2015-08-24

    Waste minimization and pollution prevention are inherent goals within the operating procedures of Los Alamos National Security, LLC (LANS). The US Department of Energy (DOE) and LANS are required to submit an annual hazardous waste minimization report to the New Mexico Environment Department (NMED) in accordance with the Los Alamos National Laboratory (LANL or the Laboratory) Hazardous Waste Facility Permit. The report was prepared pursuant to the requirements of Section 2.9 of the LANL Hazardous Waste Facility Permit. This report describes the hazardous waste minimization program (a component of the overall Waste Minimization/Pollution Prevention [WMin/PP] Program) administered by the Environmental Stewardship Group (ENV-ES). This report also supports the waste minimization and pollution prevention goals of the Environmental Programs Directorate (EP) organizations that are responsible for implementing remediation activities and describes its programs to incorporate waste reduction practices into remediation activities and procedures. LANS was very successful in fiscal year (FY) 2013 (October 1-September 30) in WMin/PP efforts. Staff funded four projects specifically related to reduction of waste with hazardous constituents, and LANS won four national awards for pollution prevention efforts from the National Nuclear Security Administration (NNSA). In FY13, there was no hazardous, mixedtransuranic (MTRU), or mixed low-level (MLLW) remediation waste generated at the Laboratory. More hazardous waste, MTRU waste, and MLLW was generated in FY13 than in FY12, and the majority of the increase was related to MTRU processing or lab cleanouts. These accomplishments and analysis of the waste streams are discussed in much more detail within this report.

  12. Mediating effects of the ICF domain of function and the gross motor function measure on the ICF domains of activity, and participation in children with cerebral palsy.

    PubMed

    Lee, Byoung-Hee; Kim, Yu-Mi; Jeong, Goo-Churl

    2015-10-01

    [Purpose] This study aimed to evaluate the mediating effect of gross motor function, measured using the Gross Motor Function Measure (GMFM) and of general function, measured using the International Classification of Functioning, Disability and Health-Child and Youth Check List (ICF-CY), on the ICF domains of activity and participation in children with cerebral palsy (CP). [Subjects] Ninety-five children with CP, from Seoul, Korea, participated in the study. [Methods] The GMFM was administered in its entirety to patients without orthoses or mobility aids. The ICF-CY was used to evaluate the degree of disability and health of subjects. [Results] GMFM score and ICF-CY function were negatively correlated to ICF-CY activity and participation. ICF-CY partially mediated the effects of the GMFM on activity and participation. [Conclusion] When establishing a treatment plan for a child with CP, limitations in activity and participation, as described by the ICF-CY, should be considered in addition to the child's physical abilities and development. In addition, the treatment plan should focus on increasing the child's activity and participation level, as well as his/her physical level.

  13. Recent Infrasound Calibration Activity at Los Alamos

    NASA Astrophysics Data System (ADS)

    Whitaker, R. W.; Marcillo, O. E.

    2014-12-01

    Absolute infrasound sensor calibration is necessary for estimating source sizes from measured waveforms. This can be an important function in treaty monitoring. The Los Alamos infrasound calibration chamber is capable of absolute calibration. Early in 2014 the Los Alamos infrasound calibration chamber resumed operations in its new location after an unplanned move two years earlier. The chamber has two sources of calibration signals. The first is the original mechanical piston, and the second is a CLD Dynamics Model 316 electro-mechanical unit that can be digitally controlled and provide a richer set of calibration options. During 2008-2010 a number of upgrades were incorporated for improved operation and recording. In this poster we give an overview of recent chamber work on sensor calibrations, calibration with the CLD unit, some measurements with different porous hoses and work with impulse sources.

  14. Water Supply at Los Alamos during 1997

    SciTech Connect

    M. N. Maes; S. G. McLin; W. D. Purtymun

    1998-12-01

    Production of potable municipal water supplies during 1997 totaled about 1,285.9 million gallons from wells in the Guaje, Pajarito, and Otowi well fields. There was no water used from the spring gallery in Water Canyon or from Guaje Reservoir during 1997. About 2.4 million gallons of water from Los Alamos Reservoir was used to irrigate public parks and recreational lands. The total water usage in 1997 was about 1,288.3 million gallons, or about 135 gallons per day per person living in Los Alamos County. Groundwater pumpage was down about 82.2 million gallons in 1997 compared with the pumpage in 1996. Four new replacement wells were drilled and cased in Guaje Canyon between October 1997 and March 1998. These wells are currently being developed and aquifer tests are being performed. A special report summarizing the geological, geophysical, and well construction logs will be issued in the near future for these new wells.

  15. Los Alamos Novel Rocket Design Flight Tested

    ScienceCinema

    Tappan, Bryce

    2016-07-12

    Los Alamos National Laboratory scientists recently flight tested a new rocket design that includes a high-energy fuel and a motor design that also delivers a high degree of safety. Researchers will now work to scale-up the design, as well as explore miniaturization of the system, in order to exploit all potential applications that would require high-energy, high-velocity, and correspondingly high safety margins.

  16. Los Alamos National Laboratory Facility Review

    SciTech Connect

    Nelson, Ronald Owen

    2015-06-05

    This series of slides depicts the Los Alamos Neutron Science Center (LANSCE). The Center's 800-MeV linac produces H+ and H- beams as well as beams of moderated (cold to 1 MeV) and unmoderated (0.1 to 600 MeV) neutrons. Experimental facilities and their capabilities and characteristics are outlined. Among these are LENZ, SPIDER, and DANCE.

  17. Los Alamos Team Demonstrates Bottle Scanner Technology

    SciTech Connect

    Espy, Michelle; Schultz, Larry

    2014-05-06

    Los Alamos scientists are demonstrating a Nuclear Magnetic Resonance Imaging (NMR) technology that may provide a breakthrough for screening liquids at airport security. By adding low-power X-ray data to the NMR mix, scientists believe they have unlocked a new detection technology. Funded in part by the Department of Homeland Security's Science and Technology Directorate, the new technology is called MagRay.

  18. Los Alamos Team Demonstrates Bottle Scanner Technology

    ScienceCinema

    Espy, Michelle; Schultz, Larry

    2016-07-12

    Los Alamos scientists are demonstrating a Nuclear Magnetic Resonance Imaging (NMR) technology that may provide a breakthrough for screening liquids at airport security. By adding low-power X-ray data to the NMR mix, scientists believe they have unlocked a new detection technology. Funded in part by the Department of Homeland Security's Science and Technology Directorate, the new technology is called MagRay.

  19. Amphibians and Reptiles of Los Alamos County

    SciTech Connect

    Teralene S. Foxx; Timothy K. Haarmann; David C. Keller

    1999-10-01

    Recent studies have shown that amphibians and reptiles are good indicators of environmental health. They live in terrestrial and aquatic environments and are often the first animals to be affected by environmental change. This publication provides baseline information about amphibians and reptiles that are present on the Pajarito Plateau. Ten years of data collection and observations by researchers at Los Alamos National Laboratory, the University of New Mexico, the New Mexico Department of Game and Fish, and hobbyists are represented.

  20. Los Alamos Novel Rocket Design Flight Tested

    SciTech Connect

    Tappan, Bryce

    2014-10-23

    Los Alamos National Laboratory scientists recently flight tested a new rocket design that includes a high-energy fuel and a motor design that also delivers a high degree of safety. Researchers will now work to scale-up the design, as well as explore miniaturization of the system, in order to exploit all potential applications that would require high-energy, high-velocity, and correspondingly high safety margins.

  1. 2016 Los Alamos National Laboratory Hazardous Waste Minimization Report

    SciTech Connect

    Salzman, Sonja L.; English, Charles Joe

    2016-12-02

    Waste minimization and pollution prevention are goals within the operating procedures of Los Alamos National Security, LLC (LANS). The US Department of Energy (DOE), inclusive of the National Nuclear Security Administration (NNSA) and the Office of Environmental Management, and LANS are required to submit an annual hazardous waste minimization report to the New Mexico Environment Department (NMED) in accordance with the Los Alamos National Laboratory (LANL or the Laboratory) Hazardous Waste Facility Permit. The report was prepared pursuant to the requirements of Section 2.9 of the LANL Hazardous Waste Facility Permit. This report describes the hazardous waste minimization program, which is a component of the overall Pollution Prevention (P2) Program, administered by the Environmental Stewardship Group (EPC-ES). This report also supports the waste minimization and P2 goals of the Associate Directorate of Environmental Management (ADEM) organizations that are responsible for implementing remediation activities and describes its programs to incorporate waste reduction practices into remediation activities and procedures. This report includes data for all waste shipped offsite from LANL during fiscal year (FY) 2016 (October 1, 2015 – September 30, 2016). LANS was active during FY2016 in waste minimization and P2 efforts. Multiple projects were funded that specifically related to reduction of hazardous waste. In FY2016, there was no hazardous, mixed-transuranic (MTRU), or mixed low-level (MLLW) remediation waste shipped offsite from the Laboratory. More non-remediation hazardous waste and MLLW was shipped offsite from the Laboratory in FY2016 compared to FY2015. Non-remediation MTRU waste was not shipped offsite during FY2016. These accomplishments and analysis of the waste streams are discussed in much more detail within this report.

  2. Ion source development for the Los Alamos heavy ion fusion injector

    SciTech Connect

    Rutkowski, H.L.; Oona, H.; Meyer, E.A.; Shurter, R.P.; Engelhardt, L.S.; Humphries, S. Jr.

    1985-01-01

    A multi-beam injector is being designed and built at Los Alamos for the US Heavy Ion Fusion Program. As part of this program, development of an aluminum-spark, pulsed plasma source is being carried out. Faraday cup diagnostics are used to study current emission and to map the current profile. An aluminum oxide scintillator with photographic film is used in conjunction with a pepper-pot to obtain time integrated emittance values.

  3. X-ray ablation measurements and modeling for ICF applications

    SciTech Connect

    Anderson, Andrew Thomas

    1996-09-01

    X-ray ablation of material from the first wall and other components of an ICF (Inertial Confinement Fusion) chamber is a major threat to the laser final optics. Material condensing on these optics after a shot may cause damage with subsequent laser shots. To ensure the successful operation of the ICF facility, removal rates must be predicted accurately. The goal for this dissertation is to develop an experimentally validated x-ray response model, with particular application to the National Ignition Facility (NIF). Accurate knowledge of the x-ray and debris emissions from ICF targets is a critical first step in the process of predicting the performance of the target chamber system. A number of 1-D numerical simulations of NIF targets have been run to characterize target output in terms of energy, angular distribution, spectrum, and pulse shape. Scaling of output characteristics with variations of both target yield and hohlraum wall thickness are also described. Experiments have been conducted at the Nova laser on the effects of relevant x-ray fluences on various materials. The response was diagnosed using post-shot examinations of the surfaces with scanning electron microscope and atomic force microscope instruments. Judgments were made about the dominant removal mechanisms for each material. Measurements of removal depths were made to provide data for the modeling. The finite difference ablation code developed here (ABLATOR) combines the thermomechanical response of materials to x-rays with models of various removal mechanisms. The former aspect refers to energy deposition in such small characteristic depths (~ micron) that thermal conduction and hydrodynamic motion are significant effects on the nanosecond time scale. The material removal models use the resulting time histories of temperature and pressure-profiles, along with ancillary local conditions, to predict rates of surface vaporization and the onset of conditions that would lead to spallation.

  4. PLUTONIUM METALLOGRAPHY AT LOS ALAMOS

    SciTech Connect

    PEREYRA, RAMIRO A.; LOVATO, DARRYL

    2007-01-08

    From early days of the Manhattan program to today, scientists and engineers have continued to investigate the metallurgical properties of plutonium (Pu). Although issues like aging was not a concern to the early pioneers, today the reliability of our aging stockpile is of major focus. And as the country moves toward a new generation of weapons similar problems that the early pioneers faced such as compatibility, homogeneity and malleability have come to the forefront. And metallography will continue to be a principle tool for the resolution of old and new issues. Standard metallographic techniques are used for the preparation of plutonium samples. The samples are first cut with a slow speed idamond saw. After mounting in Epon 815 epoxy resin, the samples are ground through 600 grit silicon carbide paper. PF 5070 (a Freon substitute) is used as a coolant, lubricant, and solvent for most operations. Rough mechanical polished is done with 9-{mu} diamond using a nap less cloth, for example nylon or cotton. Final polish is done with 1-{mu} diamond on a nappy cloth such as sylvet. Ethyl alcohol is then used ultrasonically to clean the samples before electro polishing. The sample is then electro-polished and etched in an electrolyte containing 10% nitric acid, and 90% dimethyleneformalmide. Ethyl alcohol is used as a final cleaning agent. Although standard metallographic preparation techniques are used, there are several reasons why metallography of Pu is difficult and challenging. Firstly, because of the health hazards associated with its radioactive properties, sample preparation is conducted in glove boxes. Figure 1 shows the metallography line, in an R and D facility. Since they are designed to be negative in pressure to the laboratory, cross-contamination of abrasives is a major problem. In addition, because of safety concerns and waste issues, there is a limit to the amount of solvent that can be used. Secondly, Pu will readily hydride or oxidize when in contact

  5. Los Alamos Neutron Science Center (LANSCE) Nuclear Science Facilities

    SciTech Connect

    Nelson, Ronald Owen; Wender, Steve

    2015-06-19

    The Los Alamos Neutron Science Center (LANSCE) facilities for Nuclear Science consist of a high-energy "white" neutron source (Target 4) with 6 flight paths, three low-energy nuclear science flight paths at the Lujan Center, and a proton reaction area. The neutron beams produced at the Target 4 complement those produced at the Lujan Center because they are of much higher energy and have shorter pulse widths. The neutron sources are driven by the 800-MeV proton beam of the LANSCE linear accelerator. With these facilities, LANSCE is able to deliver neutrons with energies ranging from a milli-electron volt to several hundreds of MeV, as well as proton beams with a wide range of energy, time and intensity characteristics. The facilities, instruments and research programs are described briefly.

  6. Los Alamos Explosives Performance Key to Stockpile Stewardship

    ScienceCinema

    Dattelbaum, Dana

    2016-07-12

    As the U.S. Nuclear Deterrent ages, one essential factor in making sure that the weapons will continue to perform as designed is understanding the fundamental properties of the high explosives that are part of a nuclear weapons system. As nuclear weapons go through life extension programs, some changes may be advantageous, particularly through the addition of what are known as "insensitive" high explosives that are much less likely to accidentally detonate than the already very safe "conventional" high explosives that are used in most weapons. At Los Alamos National Laboratory explosives research includes a wide variety of both large- and small-scale experiments that include small contained detonations, gas and powder gun firings, larger outdoor detonations, large-scale hydrodynamic tests, and at the Nevada Nuclear Security Site, underground sub-critical experiments.

  7. Tiger Team Assessment of the Los Alamos National Laboratory

    SciTech Connect

    Not Available

    1991-11-01

    The Management Subteam conducted a management and organization assessment of environment, safety, and health (ES H) activities performed by the Los Alamos National Laboratory (LANL) and onsite contractor personnel. The objectives of the assessment were to (1) evaluate the effectiveness of management systems and practices in terms of ensuring environmental compliance and the safety and health of workers and the general public, (2) identify key findings, and (3) identify root causes for all ES H findings and concerns. The scope of the assessment included examinations of the following from an ES H perspective: (1) strategic and program planning; (2) organizational structure and management configuration; (3) human resource management, including training and staffing; (4) management systems, including performance monitoring and assessment; (5) conduct of operations; (6) public and institutional interactions; and (7) corporate'' parent support.

  8. Smoking patterns among Los Alamos National Laboratory employees

    SciTech Connect

    Mahoney, M.C.; Wilkinson, G.S.

    1987-06-01

    Smoking patterns among 5507 employees at Los Alamos National Laboratory were investigated for those who underwent physical examinations by occupational physicians from 1978 to 1983. More male than female employees smoked, although differences in smoking rates between the sexes were not as large as differences observed for national smoking rates. Employees over 40 were more likely to smoke than younger employees, males consumed more cigarettes than did females, and Anglo employees smoked more cigarettes than did Hispanic employees. Highly educated employees smoked less than did less-educated workers, and staff members exhibited the lowest rates of smoking. Smoking cessation programs for Laboratory employees should be directed toward those subpopulations with the highest rates of smoking. 31 refs., 8 figs., 1 tab.

  9. Operational status of the Los Alamos neutron science center (LANSCE)

    SciTech Connect

    Jones, Kevin W; Erickson, John L; Schoenberg, Kurt F

    2010-01-01

    The Los Alamos Neutron Science Center (LANSCE) accelerator and beam delivery complex generates the proton beams that serve three neutron production sources; the thermal and cold source for the Manuel Lujan Jr. Neutron Scattering Center, the Weapons Neutron Research (WNR) high-energy neutron source, and a pulsed Ultra-Cold Neutron Source. These three sources are the foundation of strong and productive multi-disciplinary research programs that serve a diverse and robust user community. The facility also provides multiplexed beams for the production of medical radioisotopes and proton radiography of dynamic events. The recent operating history of these sources will be reviewed and plans for performance improvement will be discussed, together with the underlying drivers for the proposed LANSCE Refurbishment project. The details of this latter project are presented in a separate contribution.

  10. Los Alamos Explosives Performance Key to Stockpile Stewardship

    SciTech Connect

    Dattelbaum, Dana

    2014-11-03

    As the U.S. Nuclear Deterrent ages, one essential factor in making sure that the weapons will continue to perform as designed is understanding the fundamental properties of the high explosives that are part of a nuclear weapons system. As nuclear weapons go through life extension programs, some changes may be advantageous, particularly through the addition of what are known as "insensitive" high explosives that are much less likely to accidentally detonate than the already very safe "conventional" high explosives that are used in most weapons. At Los Alamos National Laboratory explosives research includes a wide variety of both large- and small-scale experiments that include small contained detonations, gas and powder gun firings, larger outdoor detonations, large-scale hydrodynamic tests, and at the Nevada Nuclear Security Site, underground sub-critical experiments.

  11. Decommissioning the UHTREX Reactor Facility at Los Alamos, New Mexico

    SciTech Connect

    Salazar, M.; Elder, J.

    1992-08-01

    The Ultra-High Temperature Reactor Experiment (UHTREX) facility was constructed in the late 1960s to advance high-temperature and gas-cooled reactor technology. The 3-MW reactor was graphite moderated and helium cooled and used 93% enriched uranium as its fuel. The reactor was run for approximately one year and was shut down in February 1970. The decommissioning of the facility involved removing the reactor and its associated components. This document details planning for the decommissioning operations which included characterizing the facility, estimating the costs of decommissioning, preparing environmental documentation, establishing a system to track costs and work progress, and preplanning to correct health and safety concerns in the facility. Work to decommission the facility began in 1988 and was completed in September 1990 at a cost of $2.9 million. The facility was released to Department of Energy for other uses in its Los Alamos program.

  12. Environmental surveillance at Los Alamos during 1991. Environmental protection group

    SciTech Connect

    Dewart, J.; Kohen, K.L.

    1993-08-01

    This report describes the environmental surveillance program conducted by Los Alamos National Laboratory during 1991. Routine monitoring for radiation and for radioactive and chemical materials is conducted on the Laboratory site as well as in the surrounding region. Monitoring results are used to determine compliance with appropriate standards and to permit early identification of potentially undesirable trends. Results and interpretation of data for 1991 cover external penetrating radiation; quantities of airborne emissions and effluents; concentrations of chemicals and radionuclides in ambient air, surface waters and groundwaters, municipal water supply, soils and sediments, and foodstuffs; and environmental compliance. Comparisons with appropriate standards, regulations, and background levels provide the basis for concluding that environmental effects from Laboratory operations are small and do not pose a threat to the public, Laboratory employees, or the environment.

  13. 42 CFR 431.154 - Informal reconsideration for ICFs/MR.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Process for NFs and ICFs/MR § 431.154 Informal reconsideration for ICFs/MR. The informal reconsideration must, at a minimum, include— (a) Written notice to the facility of the denial, termination or... those findings in writing, and (c) A written affirmation or reversal of the denial, termination,...

  14. Synthesis and NMR structure of p41icf, a potent inhibitor of human cathepsin L.

    PubMed

    Chiva, Cristina; Barthe, Philippe; Codina, Anna; Gairí, Margarida; Molina, Franck; Granier, Claude; Pugnière, Martine; Inui, Tatsuya; Nishio, Hideki; Nishiuchi, Yuji; Kimura, Terutoshi; Sakakibara, Shumpei; Albericio, Fernando; Giralt, Ernest

    2003-02-12

    The total synthesis and structural characterization of the MHCII-associated p41 invariant chain fragment (P41icf) is described. P41icf plays a crucial role in the maturation of MHC class II molecules and antigen processing, acting as a highly selective cathepsin L inhibitor. P41icf synthesis was achieved using a combined solid-phase/solution approach. The entire molecule (65 residues, 7246 Da unprotected) was assembled in solution from fully protected peptides in the size range of 10 residues. After deprotection, oxidative folding in carefully adjusted experimental conditions led to the completely folded and functional P41icf with a disulfide pairing identical to that of native P41icf. CD, NMR, and surface plasmon resonance (SPR) were used for the structural and functional characterization of synthetic P41icf. CD thermal denaturation showed clear cooperative behavior. Tight cathepsin L binding was demonstrated by SPR. (1)H NMR spectroscopy at 800 MHz of unlabeled P41icf was used to solve the three-dimensional structure of the molecule. P41icf behaves as a well-folded protein domain with a topology very close to the crystallographic cathepsin L-bound form.

  15. Disability and Functional Profiles of Patients with Migraine Measured with ICF Classification

    ERIC Educational Resources Information Center

    Raggi, Alberto

    2010-01-01

    To describe the functional profiles of patients with migraine, and the relationships between symptoms, activities and environmental factors, using WHO's International Classification of Functioning (ICF). Patients were consecutively enrolled at the Besta Institute of Milan. The ICF checklist was administered and two count-based indexes developed:…

  16. The ICF: A Framework for Setting Goals for Children with Speech Impairment

    ERIC Educational Resources Information Center

    McLeod, Sharynne; Bleile, Ken

    2004-01-01

    The International Classification of Functioning, Disability and Health (ICF) (World Health Organization, 2001) is proposed as a framework for integrative goal setting for children with speech impairment. The ICF incorporates both impairment and social factors to consider when selecting appropriate goals to bring about change in the lives of…

  17. PRP Comments for ICF Q1/Q2 FY17 Experiments 3/10/16

    SciTech Connect

    Kauffman, R.

    2016-04-14

    The PRP generally endorsed the Program plan during the short time for discussions. We agree that the strategy to develop a hohlraum that is symmetric and has low laser-plasma instabilities and to develop an alternative method for supporting the capsule is the best path forward for making progress in understanding ignition performance. The Program is oriented toward a milestone in 2020 for “determining the efficacy of NIF for ignition and credible physics-scaling to multi-megajoule yields for all ICF approaches.” We are concerned that the time and resources are not sufficient to vet all of the various approaches that are being pursued to make an informed decision by this date. For NIF to meet this goal, a process will be needed to to select the most promising paths forward. We recommend that the Program develop this process for selecting the path forward to optimize resources. We were glad to see that the direct drive program took our comments under consideration. We think that the proposed experiments have the program headed in a better direction. The PRP had only a short time to discuss the detailed experimental proposals. The following are comments on the detailed proposals. We did not have time to discuss them as a group. They represent individual opinions and provided to you as feedback to your proposals.

  18. Los Alamos National Laboratory compliance with cultural resource management legislation

    SciTech Connect

    Olinger, C.E.; Rea, K.H.

    1984-01-01

    Cultural resources management is one aspect of NEPA-induced legislation increasingly affecting federal land managers. A number of regulations, some of them recent, outline management criteria for protecting cultural resources on federal land. Nearly all construction projects at the 11,135 hectare Los Alamos National Laboratory in northern New Mexico are affected by cultural resource management requirements. A substantial prehistoric Puebloan population occupied the Laboratory area from the 13th to the early 16th centuries. Grazing, timbering, and homesteading followed Indian occupation. Therefore, archaeological and historical ruins and artifacts are abundant. The Laboratory has developed a cultural resources management program which meets both legal and project planning requirements. The program operates in coordination with the New Mexico State Historical Preservation Office. Major elements of the Laboratory program are illustrated by a current project involving relocation of a homesteader's cabin located on land required for a major new facility. The Laboratory cultural resource management program couples routine oversight of all engineering design projects with onsite resource surveys and necessary mitigation prior to construction. The Laboratory has successfully protected major archaeological and historical ruins, although some problems remain. The cultural resource program is intended to be adjustable to new needs. A cultural resource management plan will provide long-term management guidance.

  19. 42 CFR 442.117 - Termination of certification for ICFs/IID whose deficiencies pose immediate jeopardy.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 4 2012-10-01 2012-10-01 false Termination of certification for ICFs/IID whose deficiencies pose immediate jeopardy. 442.117 Section 442.117 Public Health CENTERS FOR MEDICARE & MEDICAID... DISABILITIES Certification of ICFs/IID § 442.117 Termination of certification for ICFs/IID whose...

  20. 42 CFR 442.117 - Termination of certification for ICFs/MR whose deficiencies pose immediate jeopardy.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Termination of certification for ICFs/MR whose deficiencies pose immediate jeopardy. 442.117 Section 442.117 Public Health CENTERS FOR MEDICARE & MEDICAID... ICFs/MR § 442.117 Termination of certification for ICFs/MR whose deficiencies pose immediate...

  1. Content comparison of haemophilia specific patient-rated outcome measures with the international classification of functioning, disability and health (ICF, ICF-CY)

    PubMed Central

    2010-01-01

    Background Patient-Reported Outcomes (PROs) are considered important outcomes because they reflect the patient's experience in clinical trials. PROs have been included in the field of haemophilia only recently. Purpose Comparing the contents of PROs measures used in haemophilia, based on the ICF/ICF-CY as frame of reference. Methods Haemophilia-specific PROs for adults and children were selected on the grounds of international accessibility. The content of the selected instruments were examined by linking the concepts within the items of these instruments to the ICF/ICF-CY. Results Within the 5 selected instruments 365 concepts were identified, of which 283 concepts were linked to the ICF/ICF CY and mapped into 70 different categories. The most frequently used categories were "b152: Emotional functions" and "e1101: Drugs". Conclusions The present paper provides an overview on current PROs in haemophilia and facilitates the selection of appropriate instruments for specific purposes in clinical and research settings. This work was made possible by the grant of the European Murinet Project (Multidisciplinary Research Network on Health and Disability in Europe). PMID:21108796

  2. Kinetic studies of ICF target dynamics with ePLAS

    NASA Astrophysics Data System (ADS)

    Mason, R. J.

    2016-10-01

    The ePLAS code was recently used1 to show that a modeling change from artificial to real viscosity can result in a decrease of the predicted performance of ICF targets. This code typically follows either fluid or PIC electrons with fluid ions in self-consistent E - and B - fields computed by the Implicit Moment Method2. For the present study the ions have instead been run as PIC particles undergoing Krook-like self-collisions. The ePLAS collision model continually redistributes the ion particle properties toward a local Maxwellian, while conserving the mean density, momentum and energy. Whereas the use of real viscosity captures large Knudsen Number effects as the active target dimensions shrink below the ion mean-free-path, the new kinetic modeling can manifest additional effects such as collisional shock precursors3 from the escape and streaming of the fastest particle ions. In 2D cylindrical geometry we will explore how such kinetic shock extensions might affect shell and core compression dynamics in ICF target implosions.

  3. Kr X-ray spectroscopy to diagnose NIF ICF implosions

    NASA Astrophysics Data System (ADS)

    Dasgupta, A.; Ouart, N.; Giuliani, J. L.; Clark, R. W.; Schneider, M. B.; Scott, H. A.; Chen, H.; Ma, T.; Apruzese, J. P.

    2016-10-01

    X ray spectroscopy is used on the NIF to diagnose the plasma conditions in the ignition target in indirect drive ICF implosions. High-energy emission spectra from mid to high atomic number elements can provide estimates of electron temperature near stagnation of an ICF implosion. A platform is being developed at NIF where small traces of krypton are used as a dopant to the fuel gas for spectroscopic diagnostics using krypton line emissions. The fraction of krypton dopant was varied in the experiments and was selected so as not to perturb the implosion. Simulations of the krypton spectra using a 1 in 104 atomic fraction of krypton in direct-drive exploding pusher with a range of electron temperatures and densities show discrepancies when different atomic models are used. We use our non-LTE atomic model with a detailed fine-structure level atomic structure and collisional-radiative rates to investigate the krypton spectra at the same conditions. Synthetic spectra are generated with a detailed multi-frequency radiation transport scheme from the emission regions of interest to analyze the experimental data and compare and contrast with the existing simulations at LLNL. Work supported by DOE/NNSA and under the auspices of DOE by LLNL under Contract # DE-AC52-07NA27344.

  4. Field precision machining technology of target chamber in ICF lasers

    NASA Astrophysics Data System (ADS)

    Xu, Yuanli; Wu, Wenkai; Shi, Sucun; Duan, Lin; Chen, Gang; Wang, Baoxu; Song, Yugang; Liu, Huilin; Zhu, Mingzhi

    2016-10-01

    In ICF lasers, many independent laser beams are required to be positioned on target with a very high degree of accuracy during a shot. The target chamber provides a precision platform and datum reference for final optics assembly and target collimation and location system. The target chamber consists of shell with welded flanges, reinforced concrete pedestal, and lateral support structure. The field precision machining technology of target chamber in ICF lasers have been developed based on ShenGuangIII (SGIII). The same center of the target chamber is adopted in the process of design, fabrication, and alignment. The technologies of beam collimation and datum reference transformation are developed for the fabrication, positioning and adjustment of target chamber. A supporting and rotating mechanism and a special drilling machine are developed to bore the holes of ports. An adjustment mechanism is designed to accurately position the target chamber. In order to ensure the collimation requirements of the beam leading and focusing and the target positioning, custom-machined spacers are used to accurately correct the alignment error of the ports. Finally, this paper describes the chamber center, orientation, and centering alignment error measurements of SGIII. The measurements show the field precision machining of SGIII target chamber meet its design requirement. These information can be used on similar systems.

  5. Stability design of support systems in ICF lasers

    NASA Astrophysics Data System (ADS)

    Zhu, M. Z.; Wu, W. K.; Chen, G.; Zhan, H.; Xu, Y. L.; Chen, X. J.

    2016-10-01

    Within Inertial Confinement Fusion (ICF) laser systems, many independent laser beams are required to be positioned on target with a very high degree of accuracy until shots are complete. Optical elements that are capable of moving a laser beam on the target must meet the pointing error budget. Optical elements are typically supported by systems which consist of mounts, mount frames, support structures, and foundation. The stability design for support systems in ICF laser have been developed based on the designing and evaluating experience of ShenGuangIII (SGIII). This paper will provide the methodology of position error budget. The stability allocation is developed for evaluating the performance of support systems when they are subjected to multiple sources of excitations that can cause the motion of optical elements during alignment procedures and before shots. The vibrational stability design considerations of support systems are discussed on the fundamental frequency, ambient random vibration, and modal damping. The support structures of optical elements are the relatively large and massive hybrid structure of reinforced concrete and steel frame or vessels. While the reinforced concrete portions provide optical elements stability, the steel portions afford design flexibility. Finite element analyses of ambient random vibration are typically performed to evaluate the vibrational stability performances of support systems. Finally, this paper describes the ambient random vibration and beam pointing error measurements of SGIII. The measurements show the support systems of SGIII meet design requirement. These information can be used on similar systems.

  6. Wetted Foam Liquid DT Layer ICF Experiments at the NIF

    NASA Astrophysics Data System (ADS)

    Olson, R. E.; Leeper, R. J.; Peterson, R. R.; Yi, S. A.; Zylstra, A. B.; Kline, J. L.; Bradley, P. A.; Yin, L.; Wilson, D. C.; Haines, B. M.; Batha, S. H.

    2016-10-01

    A key physics issue in indirect-drive ICF relates to the understanding of the limitations on hot spot convergence ratio (CR), principally set by the hohlraum drive symmetry, the capsule mounting hardware (the ``tent''), and the capsule fill tube. An additional key physics issue relates to the complex process by which a hot spot must be dynamically formed from the inner ice surface in a DT ice-layer implosion. These physics issues have helped to motivate the development of a new liquid DT layer wetted foam platform at the NIF that provides an ability to form the hot spot from DT vapor and experimentally study and understand hot spot formation at a variety of CR's in the range of 12ICF ignition. This work was performed under the auspices of the U. S. DOE by LANL under contract DE-AC52-06NA25396.

  7. Opacity spectra of silicon and carbon in ICF plasmas

    NASA Astrophysics Data System (ADS)

    Benredjem, D.; Calisti, A.; Ferri, S.; Gilleron, F.; Mondet, G.; Pain, J.-C.

    2017-03-01

    The knowledge of opacity is very important when one investigates the radiative properties of ICF and astrophysical plasmas. Germanium and silicon are good candidates as dopants in the ablator of some ICF schemes (LMJ in France, NIF at Livermore). In this work we calculate the opacity spectra of silicon and carbon mixtures. Two competitive methods were used. The first one is based on a detailed line calculation in which the atomic database is provided by the MCDF code. A lineshape code based on a fast algorithm was then adapted to the calculation of opacity profiles. All major line broadening mechanisms, including Zeeman splitting and Stark effect, are taken into account. This approach provides accurate opacity spectra but becomes rapidly prohibitive when the number of lines is large. To account for systems involving many ionic stages and thousands of lines, a second approach combines detailed line calculations and statistical calculations. This approach necessitates much smaller calculation times than the first one and is then more appropriate for extensive calculations. The monochromatic opacity and the Rosseland and Planck mean opacities are calculated for relevant densities and temperatures.

  8. Laser Programs Highlights 1998

    SciTech Connect

    Lowdermilk, H.; Cassady, C.

    1999-12-01

    This report covers the following topics: Commentary; Laser Programs; Inertial Confinement Fusion/National Ignition Facility (ICF/NIF); Atomic Vapor Laser Isotope Separation (AVLIS); Laser Science and Technology (LS&T); Information Science and Technology Program (IS&T); Strategic Materials Applications Program (SMAP); Medical Technology Program (MTP) and Awards.

  9. An independent evaluation of plutonium body burdens in populations near Los Alamos Laboratory using human autopsy data.

    PubMed

    Gaffney, Shannon H; Donovan, Ellen P; Shonka, Joseph J; Le, Matthew H; Widner, Thomas E

    2013-06-01

    In the mid-1940s, the United States began producing atomic weapon components at the Los Alamos National Laboratory (LANL). In an attempt to better understand historical exposure to nearby residents, this study evaluates plutonium activity in human tissue relative to residential location and length of time at residence. Data on plutonium activity in the lung, vertebrae, and liver of nearby residents were obtained during autopsies as a part of the Los Alamos Tissue Program. Participant residential histories and the distance from each residence to the primary plutonium processing buildings at LANL were evaluated in the analysis. Summary statistics, including Student t-tests and simple regressions, were calculated. Because the biological half-life of plutonium can vary significantly by organ, data were analyzed separately by tissue type (lung, liver, vertebrae). The ratios of plutonium activity (vertebrae:liver; liver:lung) were also analyzed in order to evaluate the importance of timing of exposure. Tissue data were available for 236 participants who lived in a total of 809 locations, of which 677 were verified postal addresses. Residents of Los Alamos were found to have higher plutonium activities in the lung than non-residents. Further, those who moved to Los Alamos before 1955 had higher lung activities than those who moved there later. These trends were not observed with the liver, vertebrae, or vertebrae:liver and liver:lung ratio data, however, and should be interpreted with caution. Although there are many limitations to this study, including the amount of available data and the analytical methods used to analyze the tissue, the overall results indicate that residence (defined as the year that the individual moved to Los Alamos) may have had a strong correlation to plutonium activity in human tissue. This study is the first to present the results of Los Alamos Autopsy Program in relation to residential status and location in Los Alamos.

  10. Estimates of Radionuclide Loading to Cochiti Lake from Los Alamos Canyon Using Manual and Automated Sampling

    SciTech Connect

    McLean, Christopher T.

    2000-07-01

    Los Alamos National Laboratory has a long-standing program of sampling storm water runoff inside the Laboratory boundaries. In 1995, the Laboratory started collecting the samples using automated storm water sampling stations; prior to this time the samples were collected manually. The Laboratory has also been periodically collecting sediment samples from Cochiti Lake. This paper presents the data for Pu-238 and Pu-239 bound to the sediments for Los Alamos Canyon storm water runoff and compares the sampling types by mass loading and as a percentage of the sediment deposition to Cochiti Lake. The data for both manual and automated sampling are used to calculate mass loads from Los Alamos Canyon on a yearly basis. The automated samples show mass loading 200- 500 percent greater for Pu-238 and 300-700 percent greater for Pu-239 than the manual samples. Using the mean manual flow volume for mass loading calculations, the automated samples are over 900 percent greater for Pu-238 and over 1800 percent greater for Pu-239. Evaluating the Pu-238 and Pu-239 activities as a percentage of deposition to Cochiti Lake indicates that the automated samples are 700-1300 percent greater for Pu- 238 and 200-500 percent greater for Pu-239. The variance was calculated by two methods. The first method calculates the variance for each sample event. The second method calculates the variances by the total volume of water discharged in Los Alamos Canyon for the year.

  11. Los Alamos National Laboratory computer benchmarking 1982

    SciTech Connect

    Martin, J.L.

    1983-06-01

    Evaluating the performance of computing machinery is a continual effort of the Computer Research and Applications Group of the Los Alamos National Laboratory. This report summarizes the results of the group's benchmarking activities performed between October 1981 and September 1982, presenting compilation and execution times as well as megaflop rates for a set of benchmark codes. Tests were performed on the following computers: Cray Research, Inc. (CRI) Cray-1S; Control Data Corporation (CDC) 7600, 6600, Cyber 73, Cyber 825, Cyber 835, Cyber 855, and Cyber 205; Digital Equipment Corporation (DEC) VAX 11/780 and VAX 11/782; and Apollo Computer, Inc., Apollo.

  12. Los Alamos National Laboratory strategic directions

    SciTech Connect

    Hecker, S.

    1995-10-01

    It is my pleasure to welcome you to Los Alamos. I like the idea of bringing together all aspects of the research community-defense, basic science, and industrial. It is particularly important in today`s times of constrained budgets and in fields such as neutron research because I am convinced that the best science and the best applications will come from their interplay. If we do the science well, then we will do good applications. Keeping our eye focused on interesting applications will spawn new areas of science. This interplay is especially critical, and it is good to have these communities represented here today.

  13. LAMPF II workshop, Los Alamos National Laboratory, Los Alamos, New Mexico, February 1-4, 1982

    SciTech Connect

    Thiessen, H.A.

    1982-01-01

    This report contains the proceedings of the first LAMPF II Workshop held at Los Alamos February 1 to 4, 1982. Included are the talks that were available in written form. The conclusion of the participants was that there are many exciting areas of physics that will be addressed by such a machine.

  14. Los Alamos high-current proton storage ring

    NASA Astrophysics Data System (ADS)

    Lawrence, G. P.; Hardekopf, R. A.; Jason, A. J.; Clout, P. N.; Sawyer, G. A.

    1985-05-01

    The Proton Storage Ring (PSR), whose installation was recently completed at Los Alamos, is a fast-cycling high-current accumulator designed to produce intense 800 MeV proton pulses for driving a spallation neutron source. The ring converts long beam pulses from the LAMPF linear accelerator into short bunches well matched to requirements of a high-resolution neutron-scattering materials science program. The initial performance goal for this program is to provide 100-(MU)A average current at the neutron production target within a 12-Hz pulse rate. Operation at 20 (MU)A is scheduled for September 1985, with full intensity within the next year. The storage ring was originally designed to function in a second mode in which six 1-ns bunches are accumulated and separately extracted every LAMPF macropulse. Implementation of this mode, which would serve a fast-neutron nuclear-physics program, was deferred in favor of initial concentration on the neutron-scattering program. The PSR design and status is summarized. Unique machine features include high peak current, two-step charge-stripping injection, a low-impedance buncher amplifier to counter beam-loading, and a high-repetition-rate strip-line extraction kicker.

  15. Laser-induced magnetic fields in ICF capsules, Final Report, DE-FG02-08ER85128, Phase 1

    SciTech Connect

    Lindman, Erick L

    2009-11-05

    Laser-induced magnetic fields in ICF capsules Final Report, DE-FG02-08ER85128, Phase 1 E. L. LINDMAN, Otowi Technical Services, Los Alamos, NM. The performance of an inertial-confinement-fusion (ICF) capsule can be improved by inserting a magnetic field into it before compressing it [Kirkpatrick, et al., Fusion Technol. 27, 205 (1995)]. To obtain standoff in an ICF power generator, a method of inserting the field without the use of low-inductance leads attached to the capsule is desired. A mechanism for generating such a field using a laser was discovered in Japan [Sakagami, et al., Phys. Rev. Lett. 42, 839 (1979), Kolodner and Yablonovitch, Phys. Rev. Lett. 43, 1402 (1979)] and studied at Los Alamos in the 1980s [M. A. Yates, et al., Phys. Rev. Lett. 49, 1702 (1982); Forslund and Brackbill, Phys. Rev. Lett. 48, 1614 (1982)]. In this mechanism, a p-polarized laser beam strikes a solid target producing hot electrons that are accelerated away from the target surface by resonant absorption. An electric field is created that returns the hot electrons to the target. But, they do not return to the target along the same trajectory on which they left. The resulting current produces a toroidal magnetic field that was observed to spread over a region outside the hot spot with a radius of a millimeter. No experimental measurements of the magnetic field strength were performed. Estimates from computer simulation suggest that field strengths in the range of 1 to 10 Mega gauss (100 to 1000 Tesla) were obtained outside of the laser spot. To use this mechanism to insert a magnetic field into an ICF capsule, the capsule must be redesigned. In one approach, a central conductor is added, a toroidal gap is cut in the outer wall and the DT fuel is frozen on the inner surface of the capsule. The capsule is dropped into the reaction chamber and struck first with the laser that generates the magnetic field. The laser hot spot is positioned at the center of the toroidal gap. As the

  16. Center for Materials Science, Los Alamos National Laboratory. Status report, October 1, 1990--September 30, 1991

    SciTech Connect

    Parkin, D.M.; Boring, A.M.

    1991-10-01

    This report summarizes the progress of the Center for Materials Science (CMS) from October 1, 1990 to September 30, 1991, and is the nineth such annual report. It has been a year of remarkable progress in building the programs of the Center. The extent of this progress is described in detail. The CMS was established to enhance the contribution of materials science and technology to the Laboratory`s defense, energy and scientific missions, and the Laboratory. In carrying out these responsibilities it has accepted four demanding missions: (1) Build a core group of highly rated, established materials scientists and solid state physicists. (2) Promote and support top quality, interdisciplinary materials research programs at Los Alamos. (3) Strengthen the interactions of materials science and Los Alamos with the external materials science community. and (4) Establish and maintain modern materials research facilities in a readily accessible, central location.

  17. Post-Cold War Science and Technology at Los Alamos

    NASA Astrophysics Data System (ADS)

    Browne, John C.

    2002-04-01

    Los Alamos National Laboratory serves the nation through the development and application of leading-edge science and technology in support of national security. Our mission supports national security by: ensuring the safety, security, and reliability of the U.S. nuclear stockpile; reducing the threat of weapons of mass destruction in support of counter terrorism and homeland defense; and solving national energy, environment, infrastructure, and health security problems. We require crosscutting fundamental and advanced science and technology research to accomplish our mission. The Stockpile Stewardship Program develops and applies, advanced experimental science, computational simulation, and technology to ensure the safety and reliability of U.S. nuclear weapons in the absence of nuclear testing. This effort in itself is a grand challenge. However, the terrorist attack of September 11, 2001, reminded us of the importance of robust and vibrant research and development capabilities to meet new and evolving threats to our national security. Today through rapid prototyping we are applying new, innovative, science and technology for homeland defense, to address the threats of nuclear, chemical, and biological weapons globally. Synergistically, with the capabilities that we require for our core mission, we contribute in many other areas of scientific endeavor. For example, our Laboratory has been part of the NASA effort on mapping water on the moon and NSF/DOE projects studying high-energy astrophysical phenomena, understanding fundamental scaling phenomena of life, exploring high-temperature superconductors, investigating quantum information systems, applying neutrons to condensed-matter and nuclear physics research, developing large-scale modeling and simulations to understand complex phenomena, and exploring nanoscience that bridges the atomic to macroscopic scales. In this presentation, I will highlight some of these post-cold war science and technology advances

  18. DOE Los Alamos National Laboratory – PV Feasibility Assessment, 2015 Update, NREL Final Report

    SciTech Connect

    Dean, Jesse; Witt, Monica Rene

    2016-04-06

    This report summarizes solar and wind potential for Los Alamos National Laboratory (LANL). This report is part of the “Los Alamos National Laboratory and Los Alamos County Renewable Generation” study.

  19. Clinical application of ICF key codes to evaluate patients with dysphagia following stroke.

    PubMed

    Dong, Yi; Zhang, Chang-Jie; Shi, Jie; Deng, Jinggui; Lan, Chun-Na

    2016-09-01

    This study was aimed to identify and evaluate the International Classification of Functioning (ICF) key codes for dysphagia in stroke patients. Thirty patients with dysphagia after stroke were enrolled in our study. To evaluate the ICF dysphagia scale, 6 scales were used as comparisons, namely the Barthel Index (BI), Repetitive Saliva Swallowing Test (RSST), Kubota Water Swallowing Test (KWST), Frenchay Dysarthria Assessment, Mini-Mental State Examination (MMSE), and the Montreal Cognitive Assessment (MoCA). Multiple regression analysis was performed to quantitate the relationship between the ICF scale and the other 7 scales. In addition, 60 ICF scales were analyzed by the least absolute shrinkage and selection operator (LASSO) method. A total of 21 ICF codes were identified, which were closely related with the other scales. These included 13 codes from Body Function, 1 from Body Structure, 3 from Activities and Participation, and 4 from Environmental Factors. A topographic network map with 30 ICF key codes was also generated to visualize their relationships. The number of ICF codes identified is in line with other well-established evaluation methods. The network topographic map generated here could be used as an instruction tool in future evaluations. We also found that attention functions and biting were critical codes of these scales, and could be used as treatment targets.

  20. Clinical application of ICF key codes to evaluate patients with dysphagia following stroke

    PubMed Central

    Dong, Yi; Zhang, Chang-Jie; Shi, Jie; Deng, Jinggui; Lan, Chun-Na

    2016-01-01

    Abstract This study was aimed to identify and evaluate the International Classification of Functioning (ICF) key codes for dysphagia in stroke patients. Thirty patients with dysphagia after stroke were enrolled in our study. To evaluate the ICF dysphagia scale, 6 scales were used as comparisons, namely the Barthel Index (BI), Repetitive Saliva Swallowing Test (RSST), Kubota Water Swallowing Test (KWST), Frenchay Dysarthria Assessment, Mini-Mental State Examination (MMSE), and the Montreal Cognitive Assessment (MoCA). Multiple regression analysis was performed to quantitate the relationship between the ICF scale and the other 7 scales. In addition, 60 ICF scales were analyzed by the least absolute shrinkage and selection operator (LASSO) method. A total of 21 ICF codes were identified, which were closely related with the other scales. These included 13 codes from Body Function, 1 from Body Structure, 3 from Activities and Participation, and 4 from Environmental Factors. A topographic network map with 30 ICF key codes was also generated to visualize their relationships. The number of ICF codes identified is in line with other well-established evaluation methods. The network topographic map generated here could be used as an instruction tool in future evaluations. We also found that attention functions and biting were critical codes of these scales, and could be used as treatment targets. PMID:27661012

  1. 2003 Los Alamos National Laboratory Annual Illness and Injury Surveillance Report, Revised September 2007

    SciTech Connect

    U.S. Department of Energy, Office of Health, Safety and Security, Office of Illness and Injury Prevention Programs

    2007-10-04

    Annual Illness and Injury Surveillance Program report for 2003 for Los Alamos National Lab. The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of epidemiologic surveillance activities that provide an early warning system for health problems among workers. The IISP monitors illnesses and health conditions that result in an absence of workdays, occupational injuries and illnesses, and disabilities and deaths among current workers.

  2. Los Alamos personnel and area criticality dosimeter systems

    SciTech Connect

    Vasilik, D.G.; Martin, R.W.

    1981-06-01

    Fissionable materials are handled and processed at the Los Alamos National Laboratory. Although the probability of a nuclear criticality accident is very remote, it must be considered. Los Alamos maintains a broad spectrum of dose assessment capabilities. This report describes the methods employed for personnel neutron, area neutron, and photon dose evaluations with passive dosimetry systems.

  3. The Climate at Los Alamos; Are we measurement changes?

    SciTech Connect

    Dewart, Jean Marie

    2015-04-16

    A new report shows new graphic displays of the weather trends in Los Alamos, New Mexico, and at the Los Alamos National Laboratory (LANL). The graphs show trends of average, minimum average, and maximum average temperature for summer and winter months going back decades. Records of summer and winter precipitation are also included in the report.

  4. Audit of personal property management at Los Alamos National Laboratory

    SciTech Connect

    Not Available

    1993-12-07

    The Department of Energy`s (Department) Albuquerque Operations Office (Albuquerque) and the Los Alamos National Laboratory (Los Alamos) are responsible for ensuring that Los Alamos maintains an efficient and effective personal property management system that protects, identifies, and controls Government-owned personal property in accordance with applicable regulations. Albuquerque is responsible for reviewing and approving Los Alamos` personal property management system. Los Alamos is responsible for ensuring that personal property is properly protected, identified, and controlled. The audit disclosed that Los Alamos did not have an efficient and effective personal property management system to ensure that personal property was adequately protected, identified, and controlled. In addition, Albuquerque did not approve or disapprove Los Alamos` personal property management system consistent with Federal and Department regulations. Specifically, the audit showed that Los Alamos did not account for $11.6 million of personal property. In addition, $22.2 million of personal property was not properly recorded in the database, $61.7 million of personal property could not be inventoried, and loans to employees and other entities were not adequately justified. As a result, from a total personal property inventory of approximately $1 billion, it is estimated that $100 million of personal property may not be accounted for, and $207 million may not be correctly recorded in the database. Moreover, substantial amounts of personal property on loan to employees and other entities were at risk of unauthorized use. Albuquerque concurred with the finding and agreed to implement the corrective actions recommended in the report.

  5. Content Validity of the Comprehensive ICF Core Set for Chronic Obstructive Pulmonary Diseases: An International Delphi Survey

    PubMed Central

    Jobst, Andrea; Kirchberger, Inge; Cieza, Alarcos; Stucki, Gerold; Stucki, Armin

    2013-01-01

    Introduction: The “Comprehensive ICF Core Set for Chronic Obstructive Pulmonary Diseases (COPD)“ is an application of the International Classification of Functioning, Disability and Health (ICF) and represents the typical spectrum of problems in functioning of patients with COPD. The objective of this study was to validate this ICF Core Set from the perspective of physicians. Materials and Methodology: Physicians experienced in COPD treatment were asked about the patients’ problems treated by physicians in patients with COPD in a three-round electronic mail survey using the Delphi technique. Responses were linked to the ICF. Results: Seventy-six physicians in 44 countries gave a total of 1330 responses that were linked to 148 different ICF categories. Nine ICF categories were not represented in the Comprehensive ICF Core Set for COPD although at least 75% of the participants have rated them as important. Nineteen concepts were linked to the not yet developed ICF component personal factors and seventeen concepts were not covered by the ICF. Conclusion: The high percentage of ICF categories represented in the ICF Core Set for COPD indicates satisfactory content validity from the perspective of the physicians. However, some issues were raised that were not covered and need to be investigated further. PMID:23730367

  6. ICF Based Comprehensive Evaluation for Post-Acute Spinal Cord Injury

    PubMed Central

    Nam, Hyung Seok; Kim, Kwang Dong

    2012-01-01

    Objective To evaluate the feasibility of the ICF for initial comprehensive evaluation of early post-acute spinal cord injury. Method A comprehensive evaluation of 62 early post-acute spinal cord injury (SCI) patients was conducted by rehabilitation team members, such as physicians, physical therapists, occupational therapists, nutritionists, medical social-workers, and nurses. They recorded each of their evaluation according to the ICF first level classification. The contents of the comprehensive evaluation were linked to the ICF second level categories, retrospectively. The linked codes were analyzed descriptively and were also compared with the brief ICF core set for early post-acute SCI. Results In the evaluation of early post-acute SCI patients based on the ICF first level categories, 19 items from the body functions domain, such as muscle power functions (b730) and urination functions (b620), 15 items from the body structures domain, including spinal cord and related structures (s120), 11 items from the activities and participation domain, such as transferring oneself (d420) and walking (d450), and 9 items from the environmental factors domain, e.g., health professionals (e355), were linked to the ICF second level categories. In total, 82.4% of all contents were linked to the brief ICF core set. Prognosis insight, a personal factor not linkable to an ICF code, was mentioned in 29.0% of all patients. Conclusion First level ICF categories can provide a structural base for a comprehensive evaluation in early post-acute spinal cord injury. However, frequently linked items, including the brief core set, as well as personal factors should be considered via a checklist in order to prevent the omission of significant contents. PMID:23342313

  7. Flux-limitation of the Nernst effect in magnetized ICF

    NASA Astrophysics Data System (ADS)

    Ridgers, Christopher; Barrois, Rion; Wengraf, Joshua; Bissell, John; Brodrick, Jonathan; Kingham, Robert; Read, Martin

    2016-10-01

    Magnetized ICF is a promising scheme which combines the advantages of magnetic and inertial confinement fusion. In the relevant high-energy density plasmas magnetic field evolution is often controlled by the Nernst effect where the magnetic field advects with the electron heat flow. It is well known that non-local thermal transport necessitates a flux-limiter on the heat flow. This suggests that a flux-limiter should also be applied to the Nernst effect. We have shown that this is the case using Vlasov-Fokker-Planck simulations and that the flux-limter is not the same as that required for the heat flow itself, for example when a NIF-relevant flux-limiter of 0.15 is required to limit the heat flow a Nernst flux limiter of 0.08 is required. We acknowledge support from EPSRC Grant No. EPM011372/1.

  8. Monte Carlo Methods in ICF (LIRPP Vol. 13)

    NASA Astrophysics Data System (ADS)

    Zimmerman, George B.

    2016-10-01

    Monte Carlo methods appropriate to simulate the transport of x-rays, neutrons, ions and electrons in Inertial Confinement Fusion targets are described and analyzed. The Implicit Monte Carlo method of x-ray transport handles symmetry within indirect drive ICF hohlraums well, but can be improved SOX in efficiency by angular biasing the x-rays towards the fuel capsule. Accurate simulation of thermonuclear burn and burn diagnostics involves detailed particle source spectra, charged particle ranges, inflight reaction kinematics, corrections for bulk and thermal Doppler effects and variance reduction to obtain adequate statistics for rare events. It is found that the effects of angular Coulomb scattering must be included in models of charged particle transport through heterogeneous materials.

  9. Behavior of liquid hydrogen inside an ICF target

    NASA Technical Reports Server (NTRS)

    Kim, K.; Mok, L.; Bernat, T.

    1982-01-01

    The configuration of liquid hydrogen inside spherical glass shell ICF target was studied both theoretically and experimentally. Because of the zero contact angle between the .D2 liquid and glass substrate and the limited wetting surface that is continuous, the liquid hydrogen completely covers the interior of the glass shell, resulting in the formation of a void at the center. For this reason, the present problem distinguishes itself from that for a sessile drop sitting on a flat surface. A theory was formulated to calculate the liquid hydrogen configuration by including the London-dispersion force between the liquid and the substrate molecules. The net result is an augmented Bashforth-Adams equation appropriate to a spherical substrate, which is considered to be the major contribution of the present work. Preliminary calculations indicate that this equation accurately models the liquid hydrogen behavior inside a spherical microshell.

  10. Goals and Characteristics of Long-Term Care Programs: An Analytic Model.

    ERIC Educational Resources Information Center

    Braun, Kathryn L.; Rose, Charles L.

    1989-01-01

    Used medico-social analytic model to compare five long-term care programs: Skilled Nursing Facility-Intermediate Care Facility (SNF-ICF) homes, ICF homes, foster homes, day hospitals, and home care. Identified similarities and differences among programs. Preliminary findings suggest that model is useful in the evaluation and design of long-term…

  11. Improved algorithm of ray tracing in ICF cryogenic targets

    NASA Astrophysics Data System (ADS)

    Zhang, Rui; Yang, Yongying; Ling, Tong; Jiang, Jiabin

    2016-10-01

    The high precision ray tracing inside inertial confinement fusion (ICF) cryogenic targets plays an important role in the reconstruction of the three-dimensional density distribution by algebraic reconstruction technique (ART) algorithm. The traditional Runge-Kutta methods, which is restricted by the precision of the grid division and the step size of ray tracing, cannot make an accurate calculation in the case of refractive index saltation. In this paper, we propose an improved algorithm of ray tracing based on the Runge-Kutta methods and Snell's law of refraction to achieve high tracing precision. On the boundary of refractive index, we apply Snell's law of refraction and contact point search algorithm to ensure accuracy of the simulation. Inside the cryogenic target, the combination of the Runge-Kutta methods and self-adaptive step algorithm are employed for computation. The original refractive index data, which is used to mesh the target, can be obtained by experimental measurement or priori refractive index distribution function. A finite differential method is performed to calculate the refractive index gradient of mesh nodes, and the distance weighted average interpolation methods is utilized to obtain refractive index and gradient of each point in space. In the simulation, we take ideal ICF target, Luneberg lens and Graded index rod as simulation model to calculate the spot diagram and wavefront map. Compared the simulation results to Zemax, it manifests that the improved algorithm of ray tracing based on the fourth-order Runge-Kutta methods and Snell's law of refraction exhibits high accuracy. The relative error of the spot diagram is 0.2%, and the peak-to-valley (PV) error and the root-mean-square (RMS) error of the wavefront map is less than λ/35 and λ/100, correspondingly.

  12. Portable MRI developed at Los Alamos

    SciTech Connect

    Espy, Michelle

    2015-04-22

    Scientists at Los Alamos National Laboratory are developing an ultra-low-field Magnetic Resonance Imaging (MRI) system that could be low-power and lightweight enough for forward deployment on the battlefield and to field hospitals in the World's poorest regions. "MRI technology is a powerful medical diagnostic tool," said Michelle Espy, the Battlefield MRI (bMRI) project leader, "ideally suited for imaging soft-tissue injury, particularly to the brain." But hospital-based MRI devices are big and expensive, and require considerable infrastructure, such as large quantities of cryogens like liquid nitrogen and helium, and they typically use a large amount of energy. "Standard MRI machines just can't go everywhere," said Espy. "Soldiers wounded in battle usually have to be flown to a large hospital and people in emerging nations just don't have access to MRI at all. We've been in contact with doctors who routinely work in the Third World and report that MRI would be extremely valuable in treating pediatric encephalopathy, and other serious diseases in children." So the Los Alamos team started thinking about a way to make an MRI device that could be relatively easy to transport, set up, and use in an unconventional setting. Conventional MRI machines use very large magnetic fields that align the protons in water molecules to then create magnetic resonance signals, which are detected by the machine and turned into images. The large magnetic fields create exceptionally detailed images, but they are difficult and expensive to make. Espy and her team wanted to see if images of sufficient quality could be made with ultra-low-magnetic fields, similar in strength to the Earth's magnetic field. To achieve images at such low fields they use exquisitely sensitive detectors called Superconducting Quantum Interference Devices, or SQUIDs. SQUIDs are among the most sensitive magnetic field detectors available, so interference with the signal is the primary stumbling block. "SQUIDs are

  13. Portable MRI developed at Los Alamos

    ScienceCinema

    Espy, Michelle

    2016-07-12

    Scientists at Los Alamos National Laboratory are developing an ultra-low-field Magnetic Resonance Imaging (MRI) system that could be low-power and lightweight enough for forward deployment on the battlefield and to field hospitals in the World's poorest regions. "MRI technology is a powerful medical diagnostic tool," said Michelle Espy, the Battlefield MRI (bMRI) project leader, "ideally suited for imaging soft-tissue injury, particularly to the brain." But hospital-based MRI devices are big and expensive, and require considerable infrastructure, such as large quantities of cryogens like liquid nitrogen and helium, and they typically use a large amount of energy. "Standard MRI machines just can't go everywhere," said Espy. "Soldiers wounded in battle usually have to be flown to a large hospital and people in emerging nations just don't have access to MRI at all. We've been in contact with doctors who routinely work in the Third World and report that MRI would be extremely valuable in treating pediatric encephalopathy, and other serious diseases in children." So the Los Alamos team started thinking about a way to make an MRI device that could be relatively easy to transport, set up, and use in an unconventional setting. Conventional MRI machines use very large magnetic fields that align the protons in water molecules to then create magnetic resonance signals, which are detected by the machine and turned into images. The large magnetic fields create exceptionally detailed images, but they are difficult and expensive to make. Espy and her team wanted to see if images of sufficient quality could be made with ultra-low-magnetic fields, similar in strength to the Earth's magnetic field. To achieve images at such low fields they use exquisitely sensitive detectors called Superconducting Quantum Interference Devices, or SQUIDs. SQUIDs are among the most sensitive magnetic field detectors available, so interference with the signal is the primary stumbling block. "SQUIDs are

  14. Los Alamos National Laboratory transuranic database analysis

    SciTech Connect

    Christensen, D.V.; Rogers, P.S.Z.; Kosiewicz, S.T.; LeBrun, D.B.

    1997-02-01

    This paper represents an overview of analyses conducted on the TRU database maintained by the Los Alamos National Laboratory (LANL). This evaluation was conducted to support the ``TRU Waste Workoff Strategies`` document and provides an estimation of the waste volume that potentially could be certified and ready for shipment to (WIPP) in April of 1998. Criteria defined in the WIPP WAC, including container type, weight limits, plutonium fissile gram equivalents and decay heat, were used to evaluated the waste for compliance. LANL evaluated the containers by facility and by waste stream to determining the most efficient plan for characterization and certification of the waste. Evaluation of the waste presently in storage suggested that 40- 60% potentially meets the WIPP WAC Rev. 5 criteria.

  15. Information about Practicums at Los Alamos

    SciTech Connect

    Bradley, Paul A.

    2012-07-24

    The Los Alamos Neutron Science Center is the premier facility for neutron science experiments ranging from cross section measurements, neutron scattering experiments, proton radiography, cold neutrons, actinide neutronic properties, and many other exciting topics. The National High Magnetic Field Laboratory is home to several powerful magnets, including the one that created the first non-destructive 100 Tesla field in March 2012. They probe the electronic structure of superconductors, magnetic properties of materials (including magneto-quantum effects). Research is also conducted in correlated materials, thermoacoustics, and magnetic properties of actinides. The Trident Laser has a unique niche with very high power, short pulse experiments, with a peak power of 10{sup 20} W in short pulse mode. Discoveries range from production of monoenergetic MeV ion beam, nonlinear kinetic plasma waves, the transition between kinetic and fluid nonlinear behavior and other laser-plasma interaction processes.

  16. Environmental analysis of Lower Pueblo/Lower Los Alamos Canyon, Los Alamos, New Mexico

    SciTech Connect

    Ferenbaugh, R.W.; Buhl, T.E.; Stoker, A.K.; Becker, N.M.; Rodgers, J.C.; Hansen, W.R.

    1994-12-01

    The radiological survey of the former radioactive waste treatment plant site (TA-45), Acid Canyon, Pueblo Canyon, and Los Alamos Canyon found residual contamination at the site itself and in the channel and banks of Acid, Pueblo, and lower Los Alamos Canyons all the way to the Rio Grande. The largest reservoir of residual radioactivity is in lower Pueblo Canyon, which is on DOE property. However, residual radioactivity does not exceed proposed cleanup criteria in either lower Pueblo or lower Los Alamos Canyons. The three alternatives proposed are (1) to take no action, (2) to construct a sediment trap in lower Pueblo Canyon to prevent further transport of residual radioactivity onto San Ildefonso Indian Pueblo land, and (3) to clean the residual radioactivity from the canyon system. Alternative 2, to cleanup the canyon system, is rejected as a viable alternative. Thousands of truckloads of sediment would have to be removed and disposed of, and this effort is unwarranted by the low levels of contamination present. Residual radioactivity levels, under either present conditions or projected future conditions, will not result in significant radiation doses to persons exposed. Modeling efforts show that future transport activity will not result in any residual radioactivity concentrations higher than those already existing. Thus, although construction of a sediment trap in lower Pueblo Canyon is a viable alternative, this effort also is unwarranted, and the no-action alternative is the preferred alternative.

  17. The VISTA spacecraft: Advantages of ICF (Inertial Confinement Fusion) for interplanetary fusion propulsion applications

    SciTech Connect

    Orth, C.D.; Klein, G.; Sercel, J.; Hoffman, N.; Murray, K.; Chang-Diaz, F.

    1987-10-02

    Inertial Confinement Fusion (ICF) is an attractive engine power source for interplanetary manned spacecraft, especially for near-term missions requiring minimum flight duration, because ICF has inherent high power-to-mass ratios and high specific impulses. We have developed a new vehicle concept called VISTA that uses ICF and is capable of round-trip manned missions to Mars in 100 days using A.D. 2020 technology. We describe VISTA's engine operation, discuss associated plasma issues, and describe the advantages of DT fuel for near-term applications. Although ICF is potentially superior to non-fusion technologies for near-term interplanetary transport, the performance capabilities of VISTA cannot be meaningfully compared with those of magnetic-fusion systems because of the lack of a comparable study of the magnetic-fusion systems. We urge that such a study be conducted.

  18. The VISTA spacecraft: Advantages of ICF (Inertial Confinement Fusion) for interplanetary fusions propulsion applications

    NASA Technical Reports Server (NTRS)

    Orth, Charles D.; Klein, Gail; Sercel, Joel; Hoffman, Nate; Murray, Kathy; Chang-Diaz, Franklin

    1987-01-01

    Inertial Confinement Fusion (ICF) is an attractive engine power source for interplanetary manned spacecraft, especially for near-term missions requiring minimum flight duration, because ICF has inherent high power-to-mass ratios and high specific impulses. We have developed a new vehicle concept called VISTA that uses ICF and is capable of round-trip manned missions to Mars in 100 days using A.D. 2020 technology. We describe VISTA's engine operation, discuss associated plasma issues, and describe the advantages of DT fuel for near-term applications. Although ICF is potentially superior to non-fusion technologies for near-term interplanetary transport, the performance capabilities of VISTA cannot be meaningfully compared with those of magnetic-fusion systems because of the lack of a comparable study of the magnetic-fusion systems. We urge that such a study be conducted.

  19. Lessons learned from decommissioning projects at Los Alamos National Laboratory

    SciTech Connect

    Salazar, M.

    1995-09-01

    This paper describes lessons learned over the last 20 years from 12 decommissioning projects at Los Alamos National Laboratory. These lessons relate both to overall program management and to management of specific projects during the planning and operations phases. The issues include waste management; the National Environmental Policy Act (NEPA); the Resource Conservation and Recovery Act (RCRA); the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA); contracting; public involvement; client/customer interface; and funding. Key elements of our approach are to be proactive; follow the observation method; perform field activities concurrently; develop strategies to keep reportable incidents from delaying work; seek and use programs, methods, etc., in existence to shorten learning curves; network to help develop solutions; and avoid overstudying and overcharacterizing. This approach results in preliminary plans that require very little revision before implementation, reasonable costs and schedules, early acquisition of permits and NEPA documents, preliminary characterization reports, and contracting documents. Our track record is good -- the last four projects (uranium and plutonium-processing facility and three research reactors) have been on budget and on schedule.

  20. Integrating Safety with Science,Technology and Innovation at Los Alamos National Laboratory

    SciTech Connect

    Rich, Bethany M

    2012-04-02

    The mission of Los Alamos National Laboratory (LANL) is to develop and apply science, technology and engineering solutions to ensure the safety, security, and reliability of the U.S. nuclear deterrent; reduce global threats; and solve emerging national security challenges. The most important responsibility is to direct and conduct efforts to meet the mission with an emphasis on safety, security, and quality. In this article, LANL Environmental, Safety, and Health (ESH) trainers discuss how their application and use of a kinetic learning module (learn by doing) with a unique fall arrest system is helping to address one the most common industrial safety challenges: slips and falls. A unique integration of Human Performance Improvement (HPI), Behavior Based Safety (BBS) and elements of the Voluntary Protection Program (VPP) combined with an interactive simulator experience is being used to address slip and fall events at Los Alamos.

  1. Keeping the Momentum and Nuclear Forensics at Los Alamos National Laboratory

    SciTech Connect

    Steiner, Robert Ernest; Dion, Heather M.; Dry, Donald E.; Kinman, William Scott; LaMont, Stephen Philip; Podlesak, David; Tandon, Lav

    2016-07-22

    LANL has 70 years of experience in nuclear forensics and supports the community through a wide variety of efforts and leveraged capabilities: Expanding the understanding of nuclear forensics, providing training on nuclear forensics methods, and developing bilateral relationships to expand our understanding of nuclear forensic science. LANL remains highly supportive of several key organizations tasked with carrying forth the Nuclear Security Summit messages: IAEA, GICNT, and INTERPOL. Analytical chemistry measurements on plutonium and uranium matrices are critical to numerous programs including safeguards accountancy verification measurements. Los Alamos National Laboratory operates capable actinide analytical chemistry and material science laboratories suitable for nuclear material and environmental forensic characterization. Los Alamos National Laboratory uses numerous means to validate and independently verify that measurement data quality objectives are met. Numerous LANL nuclear facilities support the nuclear material handling, preparation, and analysis capabilities necessary to evaluate samples containing nearly any mass of an actinide (attogram to kilogram levels).

  2. Low Energy Accelerator Laboratory Technical Area 53, Los Alamos National Laboratory. Environmental assessment

    SciTech Connect

    1995-04-01

    This Environmental Assessment (EA) analyzes the potential environmental impacts that would be expected to occur if the Department of Energy (DOE) were to construct and operate a small research and development laboratory building at Technical Area (TA) 53 at the Los Alamos National Laboratory (LANL), Los Alamos, New Mexico. DOE proposes to construct a small building to be called the Low Energy Accelerator Laboratory (LEAL), at a previously cleared, bladed, and leveled quarter-acre site next to other facilities housing linear accelerator research activities at TA-53. Operations proposed for LEAL would consist of bench-scale research, development, and testing of the initial section of linear particle accelerators. This initial section consists of various components that are collectively called an injector system. The anticipated life span of the proposed development program would be about 15 years.

  3. Tiger Team Assessment of the Los Alamos National Laboratory. Volume 1

    SciTech Connect

    Not Available

    1991-11-01

    This report documents the Tiger Team Assessment of the Los Alamos National Laboratory (LANL) located in Los Alamos, New Mexico. LANL is operated for the US Department of Energy (DOE) by the University of California. The Tiger Team Assessment was conducted from September 23 to November 8, 1991, under the auspices of the DOE Office of Special Projects, Office of Assistant Secretary for Environment, Safety and Health. The assessment was comprehensive, encompassing environmental, safety, and health (ES & H) disciplines; management; and contractor and DOE self-assessments. Compliance with applicable Federal, state, and local regulations; applicable DOE Orders; best management practices; and internal LANL site requirements was assessed. In addition, an evaluation of the adequacy and effectiveness of the DOE and the site contractors` management of ES & H/quality assurance programs was conducted. This volume discusses findings concerning the environmental assessment.

  4. Improved recovery and purification of plutonium at Los Alamos using macroporous anion exchange resin

    SciTech Connect

    Marsh, S.F.; Mann, M.J.

    1987-05-01

    For almost 30 years, Los Alamos National Laboratory has used anion exchange in nitric acid as the major aqueous process or the recovery and purification of plutonium. One of the few disadvantages of this system is the particularly slow rate at which the anionic nitrato complex of Pu(IV) equilibrates with the resin. The Nuclear Materials Process Technology Group at Los Alamos recently completed an ion exchange development program that focused on improving the slow sorption kinetics that limits this process. A comprehensive investigation of modern anion exchange resins identified porosity and bead size as the properties that most influence plutonium sorption kinetics. Our study found that small beads of macroporous resin produced a dramatic increase in plutonium process efficiency. The Rocky Flats Plant has already adopted this improved ion exchange technology, and it currently is being evaluated for use in other DOE plutonium-processing facilities.

  5. Los Alamos National Laboratory scientific interactions with the Former Soviet Union

    SciTech Connect

    White, P.C.

    1995-12-31

    The Los Alamos National Laboratory has a wide-ranging set of scientific interactions with technical institutes in the Former Soviet Union (FSU). Many of these collaborations, especially those in pure science, began long before the end of the Cold War and the breakup of the Soviet Union. This overview will, however, focus for the most part on those activities that were initiated in the last few years. This review may also serve both to indicate the broad spectrum of US government interests that are served, at least in part, through these laboratory initiatives, and to suggest ways in which additional collaborations with the FSU may be developed to serve similar mutual interests of the countries involved. While most of the examples represent programs carried out by Los Alamos, they are also indicative of similar efforts by Lawrence Livermore National Laboratory and Sandia National Laboratories. There are indeed other Department of Energy (DOE) laboratories, and many of them have active collaborative programs with FSU institutes. However, the laboratories specifically identified above are those with special nuclear weapons responsibilities, and thus have unique technical capabilities to address certain issues of some importance to the continuing interests of the United States and the states of the Former Soviet Union. Building on pre-collapse scientific collaborations and contacts, Los Alamos has used the shared language of science to build institutional and personal relationships and to pursue common interests. It is important to understand that Los Alamos, and the other DOE weapons laboratories are federal institutions, working with federal funds, and thus every undertaking has a definite relationship to some national objective. The fertile areas for collaboration are obviously those where US and Russian interests coincide.

  6. Looking at the ICF and human communication through the lens of classification theory.

    PubMed

    Walsh, Regina

    2011-08-01

    This paper explores the insights that classification theory can provide about the application of the International Classification of Functioning, Disability and Health (ICF) to communication. It first considers the relationship between conceptual models and classification systems, highlighting that classification systems in speech-language pathology (SLP) have not historically been based on conceptual models of human communication. It then overviews the key concepts and criteria of classification theory. Applying classification theory to the ICF and communication raises a number of issues, some previously highlighted through clinical application. Six focus questions from classification theory are used to explore these issues, and to propose the creation of an ICF-related conceptual model of communicating for the field of communication disability, which would address some of the issues raised. Developing a conceptual model of communication for SLP purposes closely articulated with the ICF would foster productive intra-professional discourse, while at the same time allow the profession to continue to use the ICF for purposes in inter-disciplinary discourse. The paper concludes by suggesting the insights of classification theory can assist professionals to apply the ICF to communication with the necessary rigour, and to work further in developing a conceptual model of human communication.

  7. Pulsed Power Fusion Program update

    SciTech Connect

    Quintenz, J.P.; Adams, R.G.; Allshouse, G.O.

    1998-06-01

    The US Department of Energy has supported a substantial research program in Inertial Confinement Fusion (ICF) since the early 1970s. Over the course of the ensuing 25 years, pulsed power energy, efficiency, and relatively low cost of the technology when compared to the mainline ICF approach involving large glass lasers. These compelling advantages of pulsed power, however, have been tempered with the difficulty that has been encountered in concentrating the energy in space and time to create the high energy and power density required to achieve temperatures useful in indirect drive ICF. Since the Beams `96 meeting two years ago, the situation has changed dramatically and extremely high x-ray power ({approximately}290 TW) and energy ({approximately}1.8 MJ) have been produced in fast x-pinch implosions on the Z accelerator. These sources have been utilized to heat hohlraums to >150 eV and have opened the door to important ICF capsule experiments.

  8. Los Alamos Scientific Laboratory energy-related history, research, managerial reorganization proposals, actions taken, and results. History report, 1945--1979

    SciTech Connect

    Hammel, E.F.

    1997-03-01

    This report documents the development of major energy-related programs at the Los Alamos Scientific Laboratory between 1945 and 1979. Although the Laboratory`s primary mission during that era was the design and development of nuclear weapons and most of the Laboratory`s funding came from a single source, a number of factors were at work that led to the development of these other programs. Some of those factors were affected by the Laboratory`s internal management structure and organization; others were the result of increasing environmental awareness within the general population and the political consequences of that awareness; still others were related to the increasing demand for energy and the increasing turmoil in the energy-rich Middle East. This report also describes the various activities in Los Alamos, in Washington, and in other areas of the world that contributed to the development of major energy-related programs at Los Alamos. The author has a unique historical perspective because of his involvement as a scientist and manager at the Los Alamos Scientific Laboratory during the time period described within the report. In addition, in numerous footnotes and references, he cites a large body of documents that include the opinions and perspectives of many others who were involved at one time or another in these programs. Finally the report includes a detailed chronology of geopolitical events that led to the development of energy-related programs at Los Alamos.

  9. Research on fission induced plasmas and nuclear pumped lasers at the Los Alamos Scientific Laboratory

    NASA Technical Reports Server (NTRS)

    Helmick, H. H.

    1979-01-01

    A program of research on gaseous uranium and uranium plasmas is being conducted at The Los Alamos Scientific Laboratory under sponsorship of the National Aeronautics and Space Administration. The objective of this work is twofold: (1) to demonstrate the proof of principle of a gaseous uranium fueled reactor, and (2) pursue fundamental research on nuclear pumped lasers. The relevancy of the two parallel programs is embodied in the possibility of a high-performance uranium plasma reactor being used as the power supply for a nuclear pumped laser system. The accomplishments in the two above fields are summarized

  10. Limited-scope probabilistic safety analysis for the Los Alamos Meson Physics Facility (LAMPF)

    SciTech Connect

    Sharirli, M.; Rand, J.L.; Sasser, M.K.; Gallegos, F.R.

    1992-12-01

    The reliability of instrumentation and safety systems is a major issue in the operation of accelerator facilities. A probabilistic safety analysis was performed or the key safety and instrumentation systems at the Los Alamos Meson Physics Facility (LAMPF). in Phase I of this unique study, the Personnel Safety System (PSS) and the Current Limiters (XLs) were analyzed through the use of the fault tree analyses, failure modes and effects analysis, and criticality analysis. Phase II of the program was done to update and reevaluate the safety systems after the Phase I recommendations were implemented. This paper provides a brief review of the studies involved in Phases I and II of the program.

  11. Review of liquid metal heat pipe work at Los Alamos

    SciTech Connect

    Reid, R.S.; Merrigan, M.A.; Sena, J.T.

    1990-01-01

    A survey of space-power related liquid metal heat pipe work at Los Alamos National Laboratory is presented. Heat pipe development at Los Alamos has been on-going since 1963. Heat pipes were initially developed for thermionic nuclear-electrical power production in space. Since then Los Alamos has developed liquid metal heat pipes for numerous applications related to high temperature systems in both the space and terrestrial environments. Some of these applications include thermionic electrical generators, thermoelectric energy conversion (both in-core and direct radiation), thermal energy storage, hypersonic vehicle leading edge cooling, and heat pipe vapor laser cells. Some of the work performed at Los Alamos has been documented in internal reports that are often little-known. A representative description and summary of progress in space-related liquid metal heat pipe technology is provided followed by a reference section citing sources where these works may be found. 53 refs.

  12. Review of liquid metal heat pipe work at Los Alamos

    SciTech Connect

    Reid, R.S.; Merrigan, M.A.; Sena, J.T. )

    1991-01-10

    A survey of space-power related liquid metal heat pipe work at Los Alamos National Laboratory is presented. Heat pipe development at Los Alamos has been on-going since 1963. Heat pipes were initially developed for thermionic nuclear-electrical power production in space. Since then Los Alamos has developed liquid metal heat pipes for numerous applications related to high temperature systems in both the space and terrestrial environments. Some of these applications include thermionic electrical generators, thermoelectric energy conversion (both in-core and direct radiation), thermal energy storage, hypersonic vehicle leading edge cooling, and heat pipe vapor laser cells. Some of the work performed at Los Alamos has been documented in internal reports that are often little-known. A representative description and summary of progress in space-related liquid metal heat pipe technology is provided followed by a reference section citing sources where these works may be found.

  13. Development of an asymmetrically driven, inviscid-hydrodynamics ICF platform

    NASA Astrophysics Data System (ADS)

    Krasheninnikova, Natalia; Hsu, Scott; Thomas, Vincent

    2016-10-01

    We describe the development of a new, asymmetrically driven ICF concept, proposed to be tested on OMEGA for improving predictive capability. It is designed to experimentally investigate the evolution of low-mode-number perturbations at the pusher/gas interface, which are predicted by high-resolution RAGE simulations and are not seen in more-prevalent lower-resolution ones. These features are deterministically seeded by appropriately chosen asymmetric drive and play a dominant role in energy transport at later stages of the implosion. The proposed design will utilize spherical plastic shell of about 800 um in filled with 5-10 atm of DD gas and driven by an asymmetrical 1-ns square pulse. This concept is designed to be well described by the Euler equations (Re >> 1, Pe >> 1, and negligible radiation pressure) in order to be well suited for detailed code comparison. The laser drive is designed to grow low-mode perturbations at the pusher/gas interface (of the type seen in the high-resolution simulations) that persist late into the implosion. We show initial simulation results, comparisons with symmetrically driven implosions, and discuss the plan for diagnosing the signatures of the evolution of the low-mode features.

  14. Advances in compact proton spectrometers for diagnosing ICF experiments

    NASA Astrophysics Data System (ADS)

    Seguin, F. H.; Sinenian, N.; Manuel, M.; Rinderknecht, H. G.; Rosenberg, M.; Zylstra, A.; Frenje, J.; Li, C. K.; Petrasso, R.; Roberts, S.; Sangster, T. C.

    2011-10-01

    The compact proton spectrometer (or WRF, for Wedge-Range-Filter proton spectrometer) measures the spectra of protons in the energy range ~ 3 to 20 MeV for diagnosing ICF experiments. It utilizes CR-39 for detecting individual protons and their energies, after they pass through a ranging filter with a continuously varying thickness, and appropriate algorithms for reconstructing the incident spectrum. It has now been in use for a decade at OMEGA, and is currently being used at the NIF, for measuring spectra of primary D3He protons in D3He implosions, secondary D3He protons in DD implosions, and ablator protons in DT implosions. These spectra are used to determine proton yields, shell areal density at shock-bang time and compression-bang time, fuel areal density, and implosion symmetry. During the decade of use there have been significant changes in fabrication and in analysis algorithms. An overview will be given here of the historical development, current analysis methods, and measurement accuracy. This work was supported in part by DOE and LLE.

  15. Fuel Cavity Asymmetry at the Onset of Deceleration in ICF

    NASA Astrophysics Data System (ADS)

    Shah, Rahul C.; Wysocki, F. J.; Glebov, V.; Hakel, P.; Joshi, T.; Kagan, G.; Mancini, R. C.; Murphy, T. J.; Stoeckl, C.; Yaakobi, B.; Benage, J. F.

    2014-10-01

    In ICF, the impact on symmetry of low mode drive non-uniformity is amplified by high convergence. Measurements have shown low mode areal density variation, however, direct impact of low modes on fuel volume has remained undemonstrated. We suggest our images provide first evidence of symmetry loss at the fuel-shell interface. The experiments use direct-drive spherical implosions (Omega). The inner 100 nm layer of the plastic shell is doped with diagnostic Ti to obtain information about interface position, temperature and density. Measurement is made at onset of deceleration at which time nuclear yield rate (NTD) and time resolved (SSCA) spectrum both are in agreement with 1-D prediction. Spectrally resolved images are obtained using the Multiple Monochromatic Imager, which combines a pinhole array with x-ray dispersive mirror and gated detector. Angle averaging of the limb-brightened image data also shows agreement with the 1D calculation. However, the 2D image shows ~20% brightness variations over modes 2-10. These modulations are discussed in context of predicted variations of interface position.

  16. Modeling and diagnosing interface mix in layered ICF implosions

    NASA Astrophysics Data System (ADS)

    Weber, C. R.; Berzak Hopkins, L. F.; Clark, D. S.; Haan, S. W.; Ho, D. D.; Meezan, N. B.; Milovich, J. L.; Robey, H. F.; Smalyuk, V. A.; Thomas, C. A.

    2015-11-01

    Mixing at the fuel-ablator interface of an inertial confinement fusion (ICF) implosion can arise from an unfavorable in-flight Atwood number between the cryogenic DT fuel and the ablator. High-Z dopant is typically added to the ablator to control the Atwood number, but recent high-density carbon (HDC) capsules have been shot at the National Ignition Facility (NIF) without this added dopant. Highly resolved post-shot modeling of these implosions shows that there was significant mixing of ablator material into the dense DT fuel. This mix lowers the fuel density and results in less overall compression, helping to explain the measured ratio of down scattered-to-primary neutrons. Future experimental designs will seek to improve this issue through adding dopant and changing the x-ray spectra with a different hohlraum wall material. To test these changes, we are designing an experimental platform to look at the growth of this mixing layer. This technique uses side-on radiography to measure the spatial extent of an embedded high-Z tracer layer near the interface. Work performed under the auspices of the U.S. D.O.E. by Lawrence Livermore National Laboratory under Contract No. DE-AC52-07NA27344.

  17. Inertial confinement fusion. ICF quarterly report, October 1993--December 1993, Volume 4, Number 1

    SciTech Connect

    Powell, H.T.; Schleich, D.P.; Murphy, P.W.

    1994-05-01

    In the 1990 National Academy of Sciences (NAS) report of its review of the U.S. Inertial Confinement Fusion (ICF) Program, it was recommended that a high priority be placed on completing the Precision Nova Project and its associated experimental campaign. Since fiscal year 1990, the lab has therefore campaigned vigorously on Nova and in its supporting laboratories to develop the Precision Nova capabilities needed to perform the stressful target experiments recommended in the 1990 NAS report. The activities to enable these experiments have been directed at improvements in three areas - the Nova laser, target fabrication capabilities, and target diagnostics. As summarized in the five articles in this report, the Precision Nova improvements have been successfully completed. These improvements have had a positive impact on target performance and on the ability to diagnose the results, as evidenced by the HEP-1 experimental results. The five articles generally concentrate on improvements to the capabilities rather than on the associated target physics experiments. Separate abstracts are included for each paper.

  18. ND:GLASS LASER DESIGN FOR LASER ICF FISSION ENERGY (LIFE)

    SciTech Connect

    Caird, J A; Agrawal, V; Bayramian, A; Beach, R; Britten, J; Chen, D; Cross, R; Ebbers, C; Erlandson, A; Feit, M; Freitas, B; Ghosh, C; Haefner, C; Homoelle, D; Ladran, T; Latkowski, J; Molander, W; Murray, J; Rubenchik, S; Schaffers, K; Siders, C W; Stappaerts, E; Sutton, S; Telford, S; Trenholme, J; Barty, C J

    2008-10-28

    We have developed preliminary conceptual laser system designs for the Laser ICF (Inertial Confinement Fusion) Fission Energy (LIFE) application. Our approach leverages experience in high-energy Nd:glass laser technology developed for the National Ignition Facility (NIF), along with high-energy-class diode-pumped solid-state laser (HEC-DPSSL) technology developed for the DOE's High Average Power Laser (HAPL) Program and embodied in LLNL's Mercury laser system. We present laser system designs suitable for both indirect-drive, hot spot ignition and indirect-drive, fast ignition targets. Main amplifiers for both systems use laser-diode-pumped Nd:glass slabs oriented at Brewster's angle, as in NIF, but the slabs are much thinner to allow for cooling by high-velocity helium gas as in the Mercury laser system. We also describe a plan to mass-produce pump-diode lasers to bring diode costs down to the order of $0.01 per Watt of peak output power, as needed to make the LIFE application economically attractive.

  19. ICStatus and progress of the National Ignition Facility as ICF and HED user facility

    NASA Astrophysics Data System (ADS)

    Van Wonterghem, B. M.; Kauffman, R. L.; Larson, D. W.; Herrmann, M. C.

    2016-05-01

    Since its completion in 2009, the National Ignition Facility has been operated in support of NNSA's Stockpile Stewardship mission, providing unique experimental data in the high energy density regime. We will describe the progress made by the National Ignition facility in the user office and management, facility capabilities, target diagnostics and diagnostics development. We will also discuss the results of a major effort to increase the shot rate on NIF. An extensive set of projects, developed in conjunction with the HED community and drawing on best practices at other facilities, improved shot rate by over 80% and recently enabled us to deliver 356 target experiments in FY15 in support of the users. Through an updated experimental set-up and review process, computer controlled set-up of the laser and diagnostics and disciplined operations, NIF also continued to deliver experimental reliability, precision and repeatability. New and complex platforms are introduced with a high success rate. Finally we discuss how new capabilities and further efficiency improvements will enable the successful execution of ICF and HED experimental programs required to support the quest for Ignition and the broader Science Based Stockpile Stewardship mission

  20. Laser glass process development for the next generation of ICF lasers

    NASA Astrophysics Data System (ADS)

    Thorne, Alfred J.; Hayden, Joseph S.

    1997-12-01

    The next generation of high energy laser systems for ICF research demands an unprecedented volume of laser glass to be produced over a limited manufacturing period while still meeting ambitious targets of internal quality and overall cost. To meet this challenge, Schott has conceived a continuous manufacturing unit capable of producing 5,000 meter class PH 4 slabs of platinum particle-free phosphate laser glass within a three-year time period. This manufacturing unit concept draws on years of prior production experience with phosphate laser glass and other high quality optical materials but still represents a significant departure from the proven discontinuous manufacturing technology successfully employed over the last ten years for platinum-free phosphate laser glass. In addition, Schott has developed a new phosphate laser glass that simultaneously offers improvements in properties that relate to both laser performance and to characteristics related to forming the glass into large, high quality slabs. In this paper we will describe the key technology issues addressed in the manufacturing development and present a brief description of the planned manufacturing method to be employed. Lastly, the status of the development will be reviewed including characterization of pilot production melts of the new laser glass and the schedule for completion of the development program.

  1. Los Alamos upgrade in metallographic capabilities

    SciTech Connect

    Ledbetter, J.M.; Dowler, K.E.; Cook, J.H.

    1985-01-01

    The Los Alamos Wing 9 Hot Cell Facility is in the process of upgrading their metallographic sample preparation and examination capability. The present capability to grind, polish and etch samples from reactor fuels and materials has been in operation for 18 years. Macro photography and alpha and beta-gamma autoradiography are an important part of this capability. Some of the fast breeder reactor experiments have contained sodium as a coolant. Therefore, the capability to distill sodium from some samples scheduled for microstructural examinations is a requirement. Since the reactor fuel samples are highly radioactive and contain plutonium, either as fabricated or as a result of breeding during reactor service, these samples must be handled in shielded hot cells containing alpha boxes to isolate the plutonium and hazardous fission products from personnel and the environment. The present equipment that was designed and built into those alpha boxes has functioned very well for the past 18 years. During that time the technicians have thought of ways to improve the equipment to do the work faster and safer. These ideas and ideas that have been developed during the design of new alpha boxes and new equipment for microstructural sample preparation have provided the concepts for the capability to perform the work faster and maintain the equipment in a safer manner.

  2. Oxidative lime pretreatment of Alamo switchgrass.

    PubMed

    Falls, Matthew; Holtzapple, Mark T

    2011-09-01

    Previous studies have shown that oxidative lime pretreatment is an effective delignification method that improves the enzymatic digestibility of many biomass feedstocks. The purpose of this work is to determine the recommended oxidative lime pretreatment conditions (reaction temperature, time, pressure, and lime loading) for Alamo switchgrass (Panicum virgatum). Enzymatic hydrolysis of glucan and xylan was used to determine the performance of the 52 studied pretreatment conditions. The recommended condition (110°C, 6.89 bar O(2), 240 min, 0.248 g Ca(OH)(2)/g biomass) achieved glucan and xylan overall yields (grams of sugar hydrolyzed/100 g sugar in raw biomass, 15 filter paper units (FPU)/g raw glucan) of 85.9 and 52.2, respectively. In addition, some glucan oligomers (2.6 g glucan recovered/100 g glucan in raw biomass) and significant levels of xylan oligomers (26.0 g xylan recovered/100 g xylan in raw biomass) were recovered from the pretreatment liquor. Combining a decrystallization technique (ball milling) with oxidative lime pretreatment further improved the overall glucan yield to 90.0 (7 FPU/g raw glucan).

  3. Historic Manhattan Project Sites at Los Alamos

    ScienceCinema

    McGehee, Ellen

    2016-07-12

    The Manhattan Project laboratory constructed at Los Alamos, New Mexico, beginning in 1943, was intended from the start to be temporary and to go up with amazing speed. Because most of those WWII-era facilities were built with minimal materials and so quickly, much of the original infrastructure was torn down in the late '40s and early '50s and replaced by more permanent facilities. However, a few key facilities remained, and are being preserved and maintained for historic significance. Four such sites are visited briefly in this video, taking viewers to V-Site, the buildings where the first nuclear explosive device was pre-assembled in preparation for the Trinity Test in Southern New Mexico. Included is another WWII area, Gun Site. So named because it was the area where scientists and engineers tested the so-called "gun method" of assembling nuclear materials -- the fundamental design of the Little Boy weapon that was eventually dropped on Hiroshima. The video also goes to Pajarito Site, home of the "Slotin Building" and "Pond Cabin." The Slotin Building is the place where scientist Louis Slotin conducted a criticality experiment that went awry in early 1946, leading to his unfortunate death, and the Pond Cabin served the team of eminent scientist Emilio Segre who did early chemistry work on plutonium that ultimately led to the Fat Man weapon.

  4. Historic Manhattan Project Sites at Los Alamos

    SciTech Connect

    McGehee, Ellen

    2014-05-22

    The Manhattan Project laboratory constructed at Los Alamos, New Mexico, beginning in 1943, was intended from the start to be temporary and to go up with amazing speed. Because most of those WWII-era facilities were built with minimal materials and so quickly, much of the original infrastructure was torn down in the late '40s and early '50s and replaced by more permanent facilities. However, a few key facilities remained, and are being preserved and maintained for historic significance. Four such sites are visited briefly in this video, taking viewers to V-Site, the buildings where the first nuclear explosive device was pre-assembled in preparation for the Trinity Test in Southern New Mexico. Included is another WWII area, Gun Site. So named because it was the area where scientists and engineers tested the so-called "gun method" of assembling nuclear materials -- the fundamental design of the Little Boy weapon that was eventually dropped on Hiroshima. The video also goes to Pajarito Site, home of the "Slotin Building" and "Pond Cabin." The Slotin Building is the place where scientist Louis Slotin conducted a criticality experiment that went awry in early 1946, leading to his unfortunate death, and the Pond Cabin served the team of eminent scientist Emilio Segre who did early chemistry work on plutonium that ultimately led to the Fat Man weapon.

  5. Los Alamos High-Brightness Accelerator FEL (HIBAF) facility

    SciTech Connect

    Cornelius, W.D.; Bender, S.; Meier, K.; Thode, L.E.; Watson, J.M.

    1989-01-01

    The 10-/mu/m Los Alamos free-electron laser (FEL) facility is being upgraded. The conventional electron gun and bunchers have been replaced with a much more compact 6-MeV photoinjector accelerator. By adding existing parts from previous experiments, the primary beam energy will be doubled to 40 MeV. With the existing 1-m wiggler (/lambda//sub w/ = 2.7 cm) and resonator, the facility can produce photons with wavelengths from 3 to 100 /mu/m when lasing on the fundamental mode and produce photons in the visible spectrum with short-period wigglers or harmonic operation. After installation of a 150/degree/ bend, a second wiggler will be added as an amplifier. The installation of laser transport tubes between the accelerator vault and an upstairs laboratory will provide experimenters with a radiation-free environment for experiments. Although the initial experimental program of the upgraded facility will be to test the single accelerator-master oscillator/power amplifier configuration, some portion of the operational time of the facility can be dedicated to user experiments. 13 refs., 5 figs., 6 tabs.

  6. Results from the Argonne, Los Alamos, JAERI collaboration

    SciTech Connect

    Meadows, J.; Smith, D.; Greenwood, L.; Haight, R.; Ikeda, Y.; Konno, C.

    1993-07-01

    Four sample packets containing elemental Ti, Fe, Ni, Cu, Nb, Ag, Eu, Tb and Hf have been irradiated in three distinct accelerator neutron fields, at Argonne National Laboratory and Los Alamos National Laboratory, USA, and Japan Atomic Energy Research Institute, Tokai, Japan. The acquired experimental data include differential cross sections and integral cross sections for the continuum neutron spectrum produced by 7-MeV deuterons incident on thick Be-metal target. The U-238(n,f) cross section was also measured at 10.3 MeV as a consistency check on the experimental technique. This the third progress report on a project which has been carried out under the auspices of an IAEA Coordinated Research Program entitled ``Activation Cross Sections for the Generation Of Long-lived Radionuclides of Importance in Fusion Reactor Technology``. The present report provides the latest results from this work. Comparison is made between the 14.7-MeV cross-section values obtained from the separate investigations at Argonne and JAERI. Generally, good agreement observed within the experimental errors when consistent sample parameters, radioactivity decay data and reference cross values are employed. A comparison is also made between the experimental results and those derived from calculations using a nuclear model. Experimental neutron information on the Be(d,n) neutron spectrum was incorporated in the comparisons for the integral results. The agreement is satisfactory considering the various uncertainties that are involved.

  7. Audit of consultant agreements at Los Alamos National Laboratory

    SciTech Connect

    1996-02-23

    The Department of Energy`s (Department) Albuquerque Operations Office (Albuquerque) and Los Alamos National Laboratory (Los Alamos) are responsible for acquiring consulting services in a manner most advantageous to the Government by ensuring adequate competition. Although the Department prefers competitively awarding subcontracts, including consultant agreements, to ensure the lowest possible cost, it allows sole sourcing a subcontract if the sole source is fully justified. The objective of the audit was to determine whether Los Alamos` consultant agreements contained adequate sole source justifications. The audit showed that Los Alamos may not have acquired some of its consultant agreements at the lowest possible cost because it did not prepare adequate sole source justifications for 17 sole source consultant agreements valued at $842,900. This condition existed because: (1) requesters did not follow policies and procedures when preparing sole source justifications, (2) Los Alamos did not have an internal mechanism to reject consultant agreements that were not adequately justified, and (3) the Department did not review consultant agreements to evaluate the adequacy of sole source justifications. Without adequate justifications, the Department cannot be assured that consultant services were obtained at the lowest possible cost. We therefore recommended that the Manager, Albuquerque Operations Office require Los Alamos to ensure proper sole source justifications and enhance internal controls over consultant agreements. Management agreed to implement the recommendations.

  8. Occurrences at Los Alamos National Laboratory: What can they tell us?

    SciTech Connect

    Richard A. Reichelt; A. Jeffery Eichorst; Marc E. Clay; Rita J. Henins; Judith D. DeHaven; Richard J. Brake

    2000-03-01

    The authors analyzed the evolution of institutional and facility response to groups of abnormal incidents at Los Alamos National Laboratory (LANL). The analysis is divided into three stages: (1) the LANL response to severe accidents from 1994 to 1996, (2) the LANL response to facility-specific clusters of low-consequence incidents from 1997 to 1999, and (3) the ongoing development of and response to a Laboratory-wide trending and analysis program. The first stage is characterized by five severe accidents at LANL--a shooting fatality, a forklift accident, two electrical shock incidents, and an explosion in a nuclear facility. Each accident caused LANL and the Department of Energy (DOE) to launch in-depth investigations. A recurrent theme of the investigations was the failure of LANL and DOE to identify and act on precursor or low-consequence events that preceded the severe accidents. The second stage is characterized by LANL response to precursor or low-consequence incidents over a two-year period. In this stage, the Chemistry and Metallurgy Research Facility, the Los Alamos Critical Experiments Facility, and the Los Alamos Neutron Science Center responded to an increase in low-consequence events by standing down their facilities. During the restart process, each facility collectively analyzed the low-consequence events and developed systemic corrective actions. The third stage is characterized by the development of a Laboratory-wide trending and analysis program, which involves proactive division-level analysis of incidents and development of systemic actions. The authors conclude that, while the stages show an encouraging evolution, the facility standdowns and restarts are overly costly and that the institutional trending and analysis program is underutilized. The authors therefore recommend the implementation of an institutional, mentored program of trending and analysis that identifies clusters of related low-consequence events, analyzes those events, and

  9. Simulations of flow interactions near Los Alamos

    SciTech Connect

    Costigan, K. R.; Winterkamp, Judy; Bossert, J. E.; Langley, D. L.

    2002-01-01

    The Pajarito Plateau is located on the eastern flank of the Jemez Mountains and the west side of the Rio Grande Valley, in north-central New Mexico, where the river runs roughly north to south. On the Pajarito Plateau, a network of surface meteorological stations has been routinely maintained by Los Alamos National Laboratory. This network includes five instrumented towers, within an approximately 10 km by 15 km area. The towers stand from 23 m to 92 m tall, with multiple wind measurement heights. Investigation of the station records indicates that the wind fields can be quite complicated and may be the result of interactions of thermally and/or dynamically driven flows of many scales. Slope flows are often found on the plateau during the morning and evening transition times, but it is not unusual to find wind directions that are inconsistent with slope flows at some or all of the stations. It has been speculated that valley circulations, as well as synoptically driven winds, interact with the slope flows, but the mesonet measurements alone, with no measurements in the remainder of the valley, were not sufficient to investigate this hypothesis. Thus, during October of 1995, supplemental meteorological instrumentation was placed in the Rio Grande basin to study the complex interaction of flows in the area. A sodar was added near the 92 m tower and a radar wind profiler was placed in the Rio Grande Valley, just east of the plateau and near the river. Measurements were also added at the top of Pajarito Mountain, just west of the plateau, and across the valley, to the east, on top of Tesuque Peak (in the Sangre de Cristo Mountains). Two surface stations were also added to the north-facing slopes of Pajarito Mountain. This paper will present observations from October 1995 and results of simulations of this area that are used in the study of the complex interaction of dynamically and thermally driven flows on multiple scales.

  10. ICF Ablator Physics Experiments on Saturn and Nova

    NASA Astrophysics Data System (ADS)

    Olson, Rick

    1996-11-01

    In indirect drive ICF, the driver energy is absorbed in a high-Z enclosure (or "hohlraum") that surrounds a spherical shell (or "capsule") containing DT fuel. The hohlraum walls are heated by the driver and emit x-rays, which are absorbed by the capsule material (the "ablator") and drive the implosion. We have used the Saturn z-pinch at SNL and the Nova laser at LLNL to explore the behavior of ablator material in x-ray radiation environments comparable in magnitude, spectrum and duration to those that will be experienced in National Ignition Facility (NIF) hohlraums. The large x-ray outputs available from pulsed-power driven z-pinches have enabled us to drive hohlraums of full NIF ignition scale size at radiation temperatures and timescales comparable to those required for the low power "foot" pulse of an ignition capsule. The high intensity of the Nova laser has allowed us to study capsule ablator physics in smaller scale hohlraums at radiation temperatures and timescales relevant to the peak power pulse for an ignition capsule. Taken together, these experiments have allowed us test our radiation-hydrodynamics computer code predictions of ablator opacity, radiation flow, and equation of state over almost the complete range of radiation environments to be encountered in a NIF hohlraum. * in collaboration with J. Porter, G. Chandler, D. Fehl, D. Jobe, R. Leeper, K. Matzen, J. McGurn, D. Noack, L. Ruggles, P. Sawyer, J. Torres, M. Vargas, D. Zagar (SNL), and H. Kornblum, T. Orzechowski, L. Suter, R. Thiessen, R. Wallace (LLNL), and the Saturn and Nova operations and diagnostic crews at SNL and LLNL. +This work was supported by the U. S. Department of Energy under Contract No. DE-AC04-94AL85000.

  11. Nonequilibrium pulsed plasma: ICF target, neutron, and x-ray sources applications

    NASA Astrophysics Data System (ADS)

    Gus'kov, Sergei Y.

    2001-04-01

    The approaches based on the properties of nonequilibrium pulsed plasmas to develop ICF target design and some ICF application problems are discussed. The methods of the creation of pulsed plasmas with essential properties on the laser radiation absorption and the emission of soft x-ray, fast ions and thermonuclear neutrons are proposed. Theoretical and experimental results are presented on the following fields: 1) laser-produced plasma of porous matter of light elements as a direct ICF target absorber smoothing the laser energy deposition nonuniformities; 2) laser- produced plasma of the composed materials which are the porous medium of light elements with a distribute solid clusters of heavy elements as a wide-range x-ray converter of the ICF target at the direct irradiation by laser beams; 3) laser-produced plasma of regularly volume-structured matter consisting of an ensemble of alternate thin layers of high and low density material containing a thermonuclear fuel or an ensemble of microshells in contact with an one another mode of a material contain such a fuel as a high power neutron source with the intensity more than 1010 DT neutron per one joule of laser energy; 4) high-power- laser-produced plasma of thin foil as a source of light Mev- ions for the direct ignition of ICF target.

  12. Destructive analysis capabilities for plutonium and uranium characterization at Los Alamos National Laboratory

    SciTech Connect

    Tandon, Lav; Kuhn, Kevin J; Drake, Lawrence R; Decker, Diana L; Walker, Laurie F; Colletti, Lisa M; Spencer, Khalil J; Peterson, Dominic S; Herrera, Jaclyn A; Wong, Amy S

    2010-01-01

    Los Alamos National Laboratory's (LANL) Actinide Analytical Chemistry (AAC) group has been in existence since the Manhattan Project. It maintains a complete set of analytical capabilities for performing complete characterization (elemental assay, isotopic, metallic and non metallic trace impurities) of uranium and plutonium samples in different forms. For a majority of the customers there are strong quality assurance (QA) and quality control (QC) objectives including highest accuracy and precision with well defined uncertainties associated with the analytical results. Los Alamos participates in various international and national programs such as the Plutonium Metal Exchange Program, New Brunswick Laboratory's (NBL' s) Safeguards Measurement Evaluation Program (SME) and several other inter-laboratory round robin exercises to monitor and evaluate the data quality generated by AAC. These programs also provide independent verification of analytical measurement capabilities, and allow any technical problems with analytical measurements to be identified and corrected. This presentation will focus on key analytical capabilities for destructive analysis in AAC and also comparative data between LANL and peer groups for Pu assay and isotopic analysis.

  13. Theoretical Investigation of Strong Coupling and Degeneracy Effects in ICF Implosions

    NASA Astrophysics Data System (ADS)

    Hu, S. X.; Goncharov, V. N.; Boehly, T. R.; Radha, P. B.; Skupsky, S.; Militze, B.

    2009-11-01

    Accurate knowledge of the equation of state (EOS) and opacity is essential to inertial confinement fusion (ICF). Low-adiabat ICF implosion designs reach strongly coupled, degenerate plasma conditions. Using the first-principles, path-integral Monte Carlo method, we have established an EOS table of deuterium, spanning typical ICF shell conditions (densities of 0.001 to 100 g/cc and temperatures of 1 eV to 1 keV). Noticeable differences in energy/pressure at moderately coupled, degenerate regimes have been found in comparison to the SESAME and Thomas-Fermi EOS. Hydrodynamic simulations using these EOS's and opacities for OMEGA implosions will be presented. This work was supported by U.S. Department of Energy Office of Inertial Confinement Fusion under Cooperative Agreement No. DE-FC52-08NA28302.

  14. [Relevance of personal contextual factors of the ICF for use in practical social medicine and rehabilitation].

    PubMed

    Grotkamp, S; Cibis, W; Bahemann, A; Baldus, A; Behrens, J; Nyffeler, I D; Echterhoff, W; Fialka-Moser, V; Fries, W; Fuchs, H; Gmünder, H P; Gutenbrunner, C; Keller, K; Nüchtern, E; Pöthig, D; Queri, S; Rentsch, H P; Rink, M; Schian, H-M; Schian, M; Schmitt, K; Schwarze, M; Ulrich, P; von Mittelstaedt, G; Seger, W

    2014-03-01

    Personal contextual factors play an essential part in the model of the International Classification of Functioning, Disability and Health (ICF). The WHO has not yet classified personal factors for global use although they impact on the functioning of persons positively or negatively. In 2010, the ICF working group of the German Society of Social Medicine and Prevention (DGSMP) presented a proposal for the classification of personal factors into 72 categories previously arranged in 6 chapters. Now a positioning paper has been added in order to stimulate a discussion about the fourth component of the ICF, to contribute towards a broader and common understanding about the nature of personal factors and to incite a dialogue among all those involved in health care as well as those people with or with-out health problems in order to gain a comprehensive perspective about a person's condition.

  15. Utility of the International Classification of Functioning, Disability and Health (ICF) for educational psychologists’ work

    PubMed Central

    Aljunied, Mariam; Frederickson, Norah

    2014-01-01

    Despite embracing a bio-psycho-social perspective, the World Health Organization’s International Classification of Functioning, Disability and Health (ICF) assessment framework has had limited application to date with children who have special educational needs (SEN). This study examines its utility for educational psychologists’ work with children who have Autism Spectrum Disorders (ASD). Mothers of 40 children with ASD aged eight to 12 years were interviewed using a structured protocol based on the ICF framework. The Diagnostic Interview for Social and Communication Disorder (DISCO) was completed with a subset of 19 mothers. Internal consistency and inter-rater reliability of the interview assessments were found to be acceptable and there was evidence for concurrent and discriminant validity. Despite some limitations, initial support for the utility of the ICF model suggests its potential value across educational, health and care fields. Further consideration of its relevance to educational psychologists in new areas of multi-agency working is warranted. PMID:26157197

  16. A connection between mix and adiabat in ICF capsules

    NASA Astrophysics Data System (ADS)

    Cheng, Baolian; Kwan, Thomas; Wang, Yi-Ming; Yi, Sunghuan (Austin); Batha, Steven

    2016-10-01

    We study the relationship between instability induced mix, preheat and the adiabat of the deuterium-tritium (DT) fuel in fusion capsule experiments. Our studies show that hydrodynamic instability not only directly affects the implosion, hot spot shape and mix, but also affects the thermodynamics of the capsule, such as, the adiabat of the DT fuel, and, in turn, affects the energy partition between the pusher shell (cold DT) and the hot spot. It was found that the adiabat of the DT fuel is sensitive to the amount of mix caused by Richtmyer-Meshkov (RM) and Rayleigh-Taylor (RT) instabilities at the material interfaces due to its exponential dependence on the fuel entropy. An upper limit of mix allowed maintaining a low adiabat of DT fuel is derived. Additionally we demonstrated that the use of a high adiabat for the DT fuel in theoretical analysis and with the aid of 1D code simulations could explain some aspects of the 3D effects and mix in the capsule experiments. Furthermore, from the observed neutron images and our physics model, we could infer the adiabat of the DT fuel in the capsule and determine the possible amount of mix in the hot spot (LA-UR-16-24880). This work was conducted under the auspices of the U.S. Department of Energy by the Los Alamos National Laboratory under Contract No. W-7405-ENG-36.

  17. Comparison of beam transport simulations to measurements at the Los Alamos Proton Storage Ring

    SciTech Connect

    Wilkinson, C.; Neri, F.; Fitzgerald, D.H.; Blind, B.; Macek, R.; Plum, M.; Sander, O.; Thiessen, H.A.

    1997-10-01

    The ability to model and simulate beam behavior in the Proton Storage Ring (PSR) of the Los Alamos Neutron Science Center (LANSCE) is an important diagnostic and predictive tool. This paper gives the results of an effort to model the ring apertures and lattice and use beam simulation programs to track the beam. The results are then compared to measured activation levels from beam loss in the ring. The success of the method determines its usefulness in evaluating the effects of planned upgrades to the Proton Storage Ring.

  18. Ambient air monitoring for organic compounds, acids, and metals at Los Alamos National Laboratory, January 1991

    SciTech Connect

    Williams, C.H.; Eberhart, C.F.

    1992-10-01

    Los Alamos National Laboratory (LANL) contracted Radian Corporation (Radian) to conduct a short-term, intensive air monitoring program whose goal was to estimate the impact of chemical emissions from LANL on the ambient air environment. A comprehensive emission inventory had identified more than 600 potential air contaminants in LANL`s emissions. A subset of specific target chemicals was selected for monitoring: 20 organic vapors, 6 metals and 5 inorganic acid vapors. These were measured at 5 ground level sampling sites around LANL over seven consecutive days in January 1991. The sampling and analytical strategy used a combination of EPA and NIOSH methods modified for ambient air applications.

  19. Ambient air monitoring for organic compounds, acids, and metals at Los Alamos National Laboratory, January 1991

    SciTech Connect

    Williams, C.H. ); Eberhart, C.F. )

    1992-01-01

    Los Alamos National Laboratory (LANL) contracted Radian Corporation (Radian) to conduct a short-term, intensive air monitoring program whose goal was to estimate the impact of chemical emissions from LANL on the ambient air environment. A comprehensive emission inventory had identified more than 600 potential air contaminants in LANL's emissions. A subset of specific target chemicals was selected for monitoring: 20 organic vapors, 6 metals and 5 inorganic acid vapors. These were measured at 5 ground level sampling sites around LANL over seven consecutive days in January 1991. The sampling and analytical strategy used a combination of EPA and NIOSH methods modified for ambient air applications.

  20. Trails Management at LANL - A Presentation to the Los Alamos County Parks and Recreation Board

    SciTech Connect

    Pava, Daniel Seth

    2015-05-12

    Los Alamos National Laboratory’s (LANL) trail management program goals include reduce risk of damage and injury to property, human life, and health, and sensitive natural and cultural resources from social trail use at LANL, facilitate the establishment of a safe viable network of linked trails, maintain security of LANL operations, and many more, respect the wishes of local Pueblos, adapt trail use to changing conditions in a responsive manner, and maintain the recreational functionality of the DOE lands. There are approximately 30 miles of LANL trails. Some are open to the public and allow bicycles, horses, hikers, and runners. Know the rules of the trails to stay safe.

  1. 42 CFR 442.119 - Duration of denial of payments and subsequent termination of an ICF/MR.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Duration of denial of payments and subsequent termination of an ICF/MR. 442.119 Section 442.119 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES... § 442.119 Duration of denial of payments and subsequent termination of an ICF/MR. (a) Period of...

  2. An international qualitative study of ability and disability in ADHD using the WHO-ICF framework.

    PubMed

    Mahdi, Soheil; Viljoen, Marisa; Massuti, Rafael; Selb, Melissa; Almodayfer, Omar; Karande, Sunil; de Vries, Petrus J; Rohde, Luis; Bölte, Sven

    2017-03-28

    This is the third in a series of four cross-cultural empirical studies designed to develop International Classification of Functioning, Disability and Health (ICF, and Children and Youth version, ICF(-CY) Core Sets for Attention-Deficit Hyperactivity Disorder (ADHD). To explore the perspectives of individuals diagnosed with ADHD, self-advocates, immediate family members and professional caregivers on relevant areas of impairment and functional abilities typical for ADHD across the lifespan as operationalized by the ICF(-CY). A qualitative study using focus group discussions or semi-structured interviews of 76 participants, divided into 16 stakeholder groups. Participants from five countries (Brazil, India, Saudi Arabia, South Africa and Sweden) were included. A deductive qualitative content analysis was conducted to extract meaningful functioning and disability concepts from verbatim material. Extracted concepts were then linked to ICF(-CY) categories by independent researchers using a standardized linking procedure. In total, 82 ICF(-CY) categories were identified, of which 32 were related to activities and participation, 25 to environmental factors, 23 to body functions and 2 to body structures. Participants also provided opinions on experienced positive sides to ADHD. A high level of energy and drive, creativity, hyper-focus, agreeableness, empathy, and willingness to assist others were the most consistently reported strengths associated with ADHD. Stakeholder perspectives highlighted the need to appraise ADHD in a broader context, extending beyond diagnostic criteria into many areas of ability and disability as well as environmental facilitators and barriers. This qualitative study, along with three other studies (comprehensive scoping review, expert survey and clinical study), will provide the scientific basis to define ICF(-CY) Core Sets for ADHD, from which assessment tools can be derived for use in clinical and research setting, as well as in health care

  3. The Development of a Framework for Target Diagnostic Centralized Control System (TDCCS) in ICF Experiments

    NASA Astrophysics Data System (ADS)

    Zhang, Chi; Wang, Jian; Yu, Xiaoqi; Yang, Dong

    2008-02-01

    A framework for target diagnostic centralized control system (TDCCS) in inertial confinement fusion (ICF) experiment has been developed. The developed framework is based on the common object request broker architecture (CORBA) standard and part of the concept from the ICFRoot (a framework based on ROOT for ICF experiments) framework design. This framework is of a component architecture, including a message bus, command executer, status processor, parser and proxy. To test the function of the framework, a simplified prototype of the TDCCS has been developed as well.

  4. Quality Assurance Baseline Assessment Report to Los Alamos National Laboratory Analytical Chemistry Operations

    SciTech Connect

    Jordan, R. A.

    1998-09-01

    This report summarizes observations that were made during a Quality Assurance (QA) Baseline Assessment of the Nuclear Materials Technology Analytical Chemistry Group (NMT-1). The Quality and Planning personnel, for NMT-1, are spending a significant amount of time transitioning out of their roles of environmental oversight into production oversight. A team from the Idaho National Engineering and Environmental Laboratory Defense Program Environmental Surety Program performed an assessment of the current status of the QA Program. Several Los Alamos National Laboratory Analytical Chemistry procedures were reviewed, as well as Transuranic Waste Characterization Program (TWCP) QA documents. Checklists were developed and the assessment was performed according to an Implementation Work Plan, INEEL/EXT-98-00740.

  5. A progress report on UNICOS misuse detection at Los Alamos

    SciTech Connect

    Thompson, J.L.; Jackson, K.A.; Stallings, C.A.; Simmonds, D.D.; Siciliano, C.L.B.; Pedicini, G.A.

    1995-10-01

    An effective method for detecting computer misuse is the automatic monitoring and analysis of on-line user activity. During the past year, Los Alamos enhanced its Network Anomaly Detection and Intrusion Reporter (NADIR) to include analysis of user activity on Los Alamos` UNICOS Crays. In near real-time, NADIR compares user activity to historical profiles and tests activity against expert rules. The expert rules express Los Alamos` security policy and define improper or suspicious behavior. NADIR reports suspicious behavior to security auditors and provides tools to aid in follow-up investigations. This paper describes the implementation to date of the UNICOS component of NADIR, along with the operational experiences and future plans for the system.

  6. Publications of Los Alamos research, 1977-1981

    SciTech Connect

    Sheridan, C.J.; Garcia, C.A.

    1983-03-01

    This bibliography is a compilation of unclassified publications of work done at the Los Alamos National Laboratory for 1977-1981. Papers published in those years are included regardless of when they were actually written. Publications received too late for inclusion in earlier compilations have also been listed. Declassification of previously classified reports is considered to constitute publication. All classified issuances are omitted - even those papers, themselves unclassified, which were published only as part of a classified document. If a paper was published more than once, all places of publication are included. The bibliography includes Los Alamos National Laboratory reports, papers released as non-Laboratory reports, journal articles, books, chapters of books, conference papers either published separately or as part of conference proceedings issued as books or reports, papers published in congressional hearings, theses, and US patents. Publications by Los Alamos authors that are not records of Laboratory-sponsored work are included when the Library becomes aware of them.

  7. Water Supply at Los Alamos 1998-2001

    SciTech Connect

    Richard J. Koch; David B. Rogers

    2003-03-01

    For the period 1998 through 2001, the total water used at Los Alamos from all sources ranged from 1325 million gallons (Mg) in 1999 to 1515 Mg in 2000. Groundwater production ranged from 1323 Mg in 1999 to 1506 Mg in 2000 from the Guaje, Pajarito, and Otowi fields. Nonpotable surface water used from Los Alamos reservoir ranged from zero gallons in 2001 to 9.3 Mg in 2000. For years 1998 through 2001, over 99% of all water used at Los Alamos was groundwater. Water use by Los Alamos National Laboratory (LANL) between 1998 and 2001 ranged from 379 Mg in 2000 to 461 Mg in 1998. The LANL water use in 2001 was 393 Mg or 27% of the total water use at Los Alamos. Water use by Los Alamos County ranged from 872 Mg in 1999 to 1137 Mg in 2000, and averaged 1006 Mg/yr. Four new replacement wells in the Guaje field (G-2A, G-3A, G-4A, and G-5A) were drilled in 1998 and began production in 1999; with existing well G-1A, the Guaje field currently has five producing wells. Five of the old Guaje wells (G-1, G-2, G-4, G-5, and G-6) were plugged and abandoned in 1999, and one well (G-3) was abandoned but remains as an observation well for the Guaje field. The long-term water level observations in production and observation (test) wells at Los Alamos are consistent with the formation of a cone of depression in response to water production. The water level decline is gradual and at most has been about 0.7 to 2 ft per year for production wells and from 0.4 to 0.9 ft/yr for observation (test) wells. The largest water level declines have been in the Guaje field where nonpumping water levels were about 91 ft lower in 2001 than in 1951. The initial water levels of the Guaje replacement wells were 32 to 57 ft lower than the initial water levels of adjacent original Guaje wells. When production wells are taken off-line for pump replacement or repair, water levels have returned to within about 25 ft of initial static levels within 6 to 12 months. Thus, the water-level trends suggest no adverse

  8. Los Alamos National Laboratory transuranic waste quality assurance project plan. Revision 1

    SciTech Connect

    1997-04-14

    This Transuranic (TRU) Waste Quality Assurance Project Plan (QAPjP) serves as the quality management plan for the characterization of transuranic waste in preparation for certification and transportation. The Transuranic Waste Characterization/Certification Program (TWCP) consists of personnel who sample and analyze waste, validate and report data; and provide project management, quality assurance, audit and assessment, and records management support, all in accordance with established requirements for disposal of TRU waste at the Waste Isolation Pilot Plant (WIPP) facility. This QAPjP addresses how the TWCP meets the quality requirements of the Carlsbad Area Office (CAO) Quality Assurance Program Description (QAPD) and the technical requirements of the Transuranic Waste Characterization Quality Assurance Program Plan (QAPP). The TWCP characterizes and certifies retrievably stored and newly generated TRU waste using the waste selection, testing, sampling, and analytical techniques and data quality objectives (DQOs) described in the QAPP, the Los Alamos National Laboratory Transuranic Waste Certification Plan (Certification Plan), and the CST Waste Management Facilities Waste Acceptance Criteria and Certification [Los Alamos National Laboratory (LANL) Waste Acceptance Criteria (WAC)]. At the present, the TWCP does not address remote-handled (RH) waste.

  9. Los Alamos National Laboratory W76 Pit Tube Lifetime Study

    SciTech Connect

    Abeln, Terri G.

    2012-04-25

    A metallurgical study was requested as part of the Los Alamos National Laboratory (LANL) W76-1 life-extension program (LEP) involving a lifetime analysis of type 304 stainless steel pit tubes subject to repeat bending loads during assembly and disassembly operations at BWXT/Pantex. This initial test phase was completed during the calendar years of 2004-2006 and the report not issued until additional recommended tests could be performed. These tests have not been funded to this date and therefore this report is considered final. Tubes were reportedly fabricated according to Rocky Flats specification P14548 - Seamless Type 304 VIM/VAR Stainless Steel Tubing. Tube diameter was specified as 0.125 inches and wall thickness as 0.028 inches. A heat treat condition is not specified and the hardness range specification can be characteristic of both 1/8 and 1/4 hard conditions. Properties of all tubes tested were within specification. Metallographic analysis could not conclusively determine a specified limit to number of bends allowable. A statistical analysis suggests a range of 5-7 bends with a 99.95% confidence limit. See the 'Statistical Analysis' section of this report. The initial phase of this study involved two separate sets of test specimens. The first group was part of an investigation originating in the ESA-GTS [now Gas Transfer Systems (W-7) Group]. After the bend cycle test parameters were chosen (all three required bends subjected to the same amount of bend cycles) and the tubes bent, the investigation was transferred to Terri Abeln (Metallurgical Science and Engineering) for analysis. Subsequently, another limited quantity of tubes became available for testing and were cycled with the same bending fixture, but with different test parameters determined by T. Abeln.

  10. A physicists guide to The Los Alamos Primer

    NASA Astrophysics Data System (ADS)

    Reed, B. Cameron

    2016-11-01

    In April 1943, a group of scientists at the newly established Los Alamos Laboratory were given a series of lectures by Robert Serber on what was then known of the physics and engineering issues involved in developing fission bombs. Serber’s lectures were recorded in a 24 page report titled The Los Alamos Primer, which was subsequently declassified and published in book form. This paper describes the background to the Primer and analyzes the physics contained in its 22 sections. The motivation for this paper is to provide a firm foundation of the background and contents of the Primer for physicists interested in the Manhattan Project and nuclear weapons.

  11. Fifty-one years of Los Alamos Spacecraft

    SciTech Connect

    Fenimore, Edward E.

    2014-09-04

    From 1963 to 2014, the Los Alamos National Laboratory was involved in at least 233 spacecraft. There are probably only one or two institutions in the world that have been involved in so many spacecraft. Los Alamos space exploration started with the Vela satellites for nuclear test detection, but soon expanded to ionospheric research (mostly barium releases), radioisotope thermoelectric generators, solar physics, solar wind, magnetospheres, astrophysics, national security, planetary physics, earth resources, radio propagation in the ionosphere, and cubesats. Here, we present a list of the spacecraft, their purpose, and their launch dates for use during RocketFest

  12. Los Alamos Using Neutrons to Stop Nuclear Smugglers

    ScienceCinema

    Favalli, Andrea; Swinhoe, Martyn

    2016-07-12

    Los Alamos National Laboratory researchers have successfully demonstrated for the first time that laser-generated neutrons can be enlisted as a useful tool in the War on Terror. The international research team used the short-pulse laser at Los Alamos's TRIDENT facility to generate a neutron beam with novel characteristics that interrogated a closed container to confirm the presence and quantity of nuclear material inside. The successful experiment paves the way for creation of a table-top-sized or truck-mounted neutron generator that could be installed at strategic locations worldwide to thwart smugglers trafficking in nuclear materials.

  13. Los Alamos Using Neutrons to Stop Nuclear Smugglers

    SciTech Connect

    Favalli, Andrea; Swinhoe, Martyn

    2013-06-03

    Los Alamos National Laboratory researchers have successfully demonstrated for the first time that laser-generated neutrons can be enlisted as a useful tool in the War on Terror. The international research team used the short-pulse laser at Los Alamos's TRIDENT facility to generate a neutron beam with novel characteristics that interrogated a closed container to confirm the presence and quantity of nuclear material inside. The successful experiment paves the way for creation of a table-top-sized or truck-mounted neutron generator that could be installed at strategic locations worldwide to thwart smugglers trafficking in nuclear materials.

  14. The development of the atomic bomb, Los Alamos

    SciTech Connect

    Seidel, R.W.

    1993-11-01

    The historical presentation begins with details of the selection of Los Alamos as the site of the Army installation. Wartime efforts of the Army Corps of Engineers, and scientists to include the leader of Los Alamos, Robert Oppenheimer are presented. The layout and construction of the facilities are discussed. The monumental design requirements of the bombs are discussed, including but not limited to the utilization of the second choice implosion method of detonation, and the production of bomb-grade nuclear explosives. The paper ends with a philosophical discussion on the use of nuclear weapons.

  15. Needs assessment for fire department services and resources for the Los Alamos National Laboratory, Los Alamos, New Mexico. Final report

    SciTech Connect

    1995-11-15

    This report has been developed in response to a request from the Los Alamos National Laboratory (LANL) to evaluate the need for fire department services so as to enable the Laboratory to plan effective fire protection and thereby: meet LANL`s regulatory and contractual obligations; interface with the Department of Energy (DOE) and other agencies on matters relating to fire and emergency services; and ensure appropriate protection of the community and environment. This study is an outgrowth of the 1993 Fire Department Needs Assessment (prepared for DOE) but is developed from the LANL perspective. Input has been received from cognizant and responsible representatives at LANL, DOE, Los Alamos County (LAC) and the Los Alamos Fire Department (LAFD).

  16. A survey of macromycete diversity at Los Alamos National Laboratory, Bandelier National Monument, and Los Alamos County; A preliminary report

    SciTech Connect

    Jarmie, N.; Rogers, F.J.

    1997-11-01

    The authors have completed a 5-year survey (1991--1995) of macromycetes found in Los Alamos County, Los Alamos National Laboratory, and Bandelier National Monument. The authors have compiled a database of 1,048 collections, their characteristics, and identifications. The database represents 123 (98%) genera and 175 (73%) species reliably identified. Issues of habitat loss, species extinction, and ecological relationships are addressed, and comparisons with other surveys are made. With this baseline information and modeling of this baseline data, one can begin to understand more about the fungal flora of the area.

  17. Nuclear Forensics at Los Alamos National Laboratory

    SciTech Connect

    Kinman, William Scott; Steiner, Robert Ernest; Lamont, Stephen Philip

    2016-09-30

    Nuclear forensics assists in responding to any event where nuclear material is found outside of regulatory control; a response plan is presented and a nuclear forensics program is undergoing further development so that smugglers are sufficiently deterred.

  18. DNA is hypomethylated at repetitive and single copy loci in patients with ICF syndrome

    SciTech Connect

    Schuffenhauer, S.; Buchholz, B.; Neitinger, T.

    1994-09-01

    ICF syndrome (immunodeficiency, centromeric heterochromatin instability, facial anomaly) is a very rare genetic disorder, reported in only 12 cases. Chromosomal rearrangements occur predominantly in the heterochromatic regions of HC 1 and 16 and include stretching, whole arm deletions and multibranched configurations. The molecular defect of these abnormalities is not known. Similar abnormalities have been found in cell cultures treated with viruses or 5-acacytidine, agents which cause DNA hypomethylation. Because heterochromatic DNA is known to be highly methylated, we hypothesise that DNA hypomethylation and subsequent disturbance of heterochromatin structure may play a role in the chromosomal rearrangements of ICF syndrome. Methylation studies in DNA from peripheral lymphocytes of two non-related ICF patients revealed hypomethylation of satellite-2 DNA localized in the heterochromatic regions of HC 1 and 16. DNA hypomethylation was also found at single copy loci, e.g. D15S63, D15S9, H19 and DXS255. Differences between the two patients suggest a random distribution of DNA hypomethylation. While a causal relationship between the molecular and cytogenetic abnormalities is likely, the postulated relationship between hypomethylation and the clinical symptoms in ICF syndrome remains to be elucidated.

  19. Analyses in support of the Laboratory Microfusion Facility and ICF commercial reactor designs

    SciTech Connect

    Meier, W.R.; Monsler, M.J.

    1988-12-28

    Our work on this contract was divided into two major categories; two thirds of the total effort was in support of the Laboratory Microfusion Facility (LMF), and one third of the effort was in support of Inertial Confinement Fusion (ICF) commercial reactors. This final report includes copies of the formal reports, memoranda, and viewgraph presentations that were completed under this contract.

  20. Disability and Functional Profiles of Patients with Myasthenia Gravis Measured with ICF Classification

    ERIC Educational Resources Information Center

    Leonardi, Matilde; Raggi, Alberto; Antozzi, Carlo; Confalonieri, Paolo; Maggi, Lorenzo; Cornelio, Ferdinando; Mantegazza, Renato

    2009-01-01

    The objective of this study is to describe functional profiles of patients with myasthenia gravis (MG), and the relationships among symptoms, activities and environmental factors (EF), by using WHO's International Classification of Functioning Disability and Health (ICF). Patients were consecutively enrolled at the Besta Institute of Milan, Italy.…

  1. LANL Q2 2016 Quarterly Progress Report. Science Campaign and ICF

    SciTech Connect

    Douglas, Melissa Rae

    2016-04-07

    This progress report includes highlights for the Science Campaign and ICF about Advanced Certification and Assessment Methodologies, Implosion Hydrodynamics (C-1, SCE), Materials and Nuclear Science (C-1, C-2), Capabilities for Nuclear Intelligence, and High Energy Density Science (C-1, C-4, C-10). Upcoming meetings, briefings, and experiments are then listed for April and May.

  2. Utility of the International Classification of Functioning, Disability and Health (ICF) for Educational Psychologists' Work

    ERIC Educational Resources Information Center

    Aljunied, Mariam; Frederickson, Norah

    2014-01-01

    Despite embracing a bio-psycho-social perspective, the World Health Organization's International Classification of Functioning, Disability and Health (ICF) assessment framework has had limited application to date with children who have special educational needs (SEN). This study examines its utility for educational psychologists' work with…

  3. The development and application of advanced analytical methods to commercial ICF reactor chambers. Final report

    SciTech Connect

    Cousseau, P.; Engelstad, R.; Henderson, D.L.

    1997-10-01

    Progress is summarized in this report for each of the following tasks: (1) multi-dimensional radiation hydrodynamics computer code development; (2) 2D radiation-hydrodynamic code development; (3) ALARA: analytic and Laplacian adaptive radioactivity analysis -- a complete package for analysis of induced activation; (4) structural dynamics modeling of ICF reactor chambers; and (5) analysis of self-consistent target chamber clearing.

  4. Disability and Profiles of Functioning of Patients with Parkinson's Disease Described with ICF Classification

    ERIC Educational Resources Information Center

    Raggi, Alberto; Leonardi, Matilde; Ajovalasit, Daniela; Carella, Francesco; Soliveri, Paola; Albanese, Alberto; Romito, Luigi

    2011-01-01

    The objective of this study was to describe the functional profiles of patients with Parkinson's disease (PD), and the relationships between impairment in body functions, limitations in activities, and environmental factors, using the World Health Organization's International Classification of Functioning, Disability, and Health (ICF). Patients…

  5. Crossed Beam Energy Transfer in the NIF ICF Target Design

    SciTech Connect

    Williams, E A; Hinkel, D E; Hittinger, J A

    2003-08-27

    In the National Ignition Facility (NIF) ICF point design, the cylindrical hohlraum target is illuminated by multiple laser beams through two laser entrance holes on the ends. According to simulations by LASNEX and HYDRA plasma created inside the hohlraum will stream out of the LEH, accelerate to supersonic speeds and then fan out radially. Inside the hohlraum, flows are subsonic. Forward Brillouin scattering can transfer energy between pairs of laser beams (0 and 1) if the following frequency matching condition is satisfied: {omega}{sub 0} - {omega}{sub 1} = (k{sub 0} - k{sub 1}) {center_dot} V + |k{sub 0} - k{sub 1}| c{sub s} (1) where {omega}{sub 0.1} and k{sub 0.1} are the frequencies and wave-numbers of the two laser beams, V is the plasma flow velocity and c{sub s} is the local ion sound speed. In the nominal case of equal frequency beams, this requires the component of the plasma flow velocity transverse to the bisector of the beam directions to be sonic, with the resulting transfer being to the downstream beam. In the NIF beam geometry, this is from the outer to inner cones of beams. The physics of this transfer is the same as in beam bending; the difference being that in the case of beam bending the effect is to redistribute power to the downstream side of the single beam. Were significant power transfer to occur in the point design, the delicately tuned implosion symmetry would be spoiled. To directly compensate for the transfer, the incident beam powers would have to be adjusted. The greatest vulnerability in the point design thus occurs at 15.2ns, when the inner beams are at their peak power and are at their nominal design power limit. In this situation, some other means of symmetry control would be required, such as re-pointing. At 15.2ns, the envelope focal intensities of the outer and inner beams are approximately 10{sup 15} and 6.7 10{sup 14} W/cm{sup 2} respectively. There is little absorption or diffractive spreading of the beams in the crossing

  6. Working with Fermi at Chicago and Los Alamos

    NASA Astrophysics Data System (ADS)

    Garwin, Richard L.

    2010-02-01

    I discuss my experience with Enrico Fermi as student and fellow faculty member at Chicago and with him as consultants to the Los Alamos Scientific Laboratory in 1950-1952. The talk shares observations about this great physicist and exemplary human being. )

  7. The Controlled-Air Incinerator at Los Alamos

    SciTech Connect

    Newmyer, J.N.

    1994-04-01

    The Controlled-Air Incinerator (CAI) at Los Alamos is being modified and upgraded to begin routine operations treating low-level mixed waste (LLMW), radioactively contaminated polychlorinated biphenyl (PCB) wastes, low-level liquid wastes, and possibly transuranic (TRU) wastes. This paper describes those modifications. Routine waste operations should begin in late FY95.

  8. Aqueous Nitrate Recovery Line at Los Alamos National Laboratory

    SciTech Connect

    Finstad, Casey Charles

    2016-06-15

    This powerpoint is part of the ADPSM Plutonium Engineering Lecture Series, which is an opportunity for new hires at LANL to get an overview of work done at TA55. It goes into detail about the aqueous nitrate recovery line at Los Alamos National Laboratory.

  9. Brief review of Rover fuel development at Los Alamos

    NASA Technical Reports Server (NTRS)

    Davidson, Keith V.

    1991-01-01

    A brief review of the graphite matrix uranium fuel development efforts at Los Alamos from 1955 through 1972 is presented. The uses of graphite flour carbon black, various binders, uranium dioxide, coated UC2 particles, and zirconium carbide in this development are described.

  10. Summary of environmental surveillance at Los Alamos during 1995

    SciTech Connect

    1996-10-01

    Linking the Rio Grande Valley and the Jemez Mountains, New Mexico`s Pajarito Plateau is home to a world-class scientific institution. Los Alamos National Laboratory (or the Laboratory), managed by the Regents of the University of California, is a government-owned, Department of Energy-supervised complex investigating all areas of modern science for the purposes of national defense, health, conservation, and ecology. The Laboratory was founded in 1943 as part of the Manhattan Project, whose members assembled to create the first nuclear weapon. Occupying the campus of the Los Alamos Ranch School, American and British scientists gathered on the isolated mesa tops to harness recently discovered nuclear power with the hope of ending World War II. In July 1945, the initial objective of the Laboratory, a nuclear device, was achieved in Los Alamos and tested in White Sands, New Mexico. Today the Laboratory continues its role in defense, particularly in nuclear weapons, including developing methods for safely handling weapons and managing waste. For the past twenty years, the Laboratory has published an annual environmental report. This pamphlet offers a synopsis that briefly explains important concepts, such as radiation and provides a summary of the monitoring results and regulatory compliance status that are explained at length in the document entitled Environmental Surveillance at Los Alamos during 1995.

  11. Airport-Noise Levels and Annoyance Model (ALAMO) system's reference manual

    NASA Technical Reports Server (NTRS)

    Deloach, R.; Donaldson, J. L.; Johnson, M. J.

    1986-01-01

    The airport-noise levels and annoyance model (ALAMO) is described in terms of the constituent modules, the execution of ALAMO procedure files, necessary for system execution, and the source code documentation associated with code development at Langley Research Center. The modules constituting ALAMO are presented both in flow graph form, and through a description of the subroutines and functions that comprise them.

  12. To adopt is to adapt: the process of implementing the ICF with an acute stroke multidisciplinary team in England

    PubMed Central

    Tempest, Stephanie; Harries, Priscilla; Kilbride, Cherry; De Souza, Lorraine

    2012-01-01

    Purpose: The success of the International Classifcation of Functioning, Disability and Health (ICF) depends on its uptake in clinical practice. This project aimed to explore ways the ICF could be used with an acute stroke multidisciplinary team and identify key learning from the implementation process. Method: Using an action research approach, iterative cycles of observe, plan, act and evaluate were used within three phases: exploratory; innovatory and refective. Thematic analysis was undertaken, using a model of immersion and crystallisation, on data collected via interview and focus groups, e-mail communications, minutes from relevant meetings, feld notes and a refective diary. Results: Two overall themes were determined from the data analysis which enabled implementation. There is a need to: (1) adopt the ICF in ways that meet local service needs; and (2) adapt the ICF language and format. Conclusions: The empirical fndings demonstrate how to make the ICF classifcation a clinical reality. First, we need to adopt the ICF as a vehicle to implement local service priorities e.g. to structure a multidisciplinary team report, thus enabling ownership of the implementation process. Second, we need to adapt the ICF terminology and format to make it acceptable for use by clinicians. PMID:22372376

  13. Systematic Literature Review on ICF From 2001 to 2013 in the Nordic Countries Focusing on Clinical and Rehabilitation Context

    PubMed Central

    Maribo, Thomas; Petersen, Kirsten S.; Handberg, Charlotte; Melchiorsen, Hanne; Momsen, Anne-Mette H.; Nielsen, Claus V.; Leonardi, Matilde; Labriola, Merete

    2016-01-01

    We present a systematic review on International Classification of Functioning, Disability and Health (ICF) used in the Nordic countries from 2001 through 2013, describing and quantifying the development in utilization of ICF, and describe the extent to which the different components of the ICF have been used. A search was conducted in EMBASE, MEDLINE and PsycInfo. Papers from Nordic countries were included if ICF was mentioned in title or abstract. Papers were assigned to one of eight categories covering the wide rehabilitation area; furthermore, area of focus was assigned. Use of ICF components and intervention were coded in papers categorized as “clinical and/or rehabilitation contexts” or “non-clinical contexts”. One hundred seventy papers were included, of these 99 papers were from the categories “clinical and/or rehabilitation contexts” or “non-clinical contexts”. Forty-two percent of the 170 included papers were published in the period 2011 - 2013. There was an increase in ICF-relevant papers from 2001 to 2013, especially in the categories “clinical and/or rehabilitation contexts” and “non-clinical contexts”. The most represented focus areas were neurology, musculoskeletal, and work-related areas. All five or at least four ICF components were mentioned in the results or discussions in most papers, and activity was most frequently mentioned. PMID:26668676

  14. Waste processing cost recovery at Los Alamos National Laboratory--analysis and recommendations

    SciTech Connect

    Booth, Steven Richard

    2008-01-01

    Los Alamos National Laboratory is implementing full cost recovery for waste processing in fiscal year 2009 (FY2009), after a transition year in FY2008. Waste processing cost recovery has been implemented in various forms across the nuclear weapons complex and in corporate America. The fundamental reasoning of sending accurate price signals to waste generators is economically sound, and leads to waste minimization and reduced waste expense over time. However, Los Alamos faces significant implementation challenges because of its status as a government-owned, contractor-operated national scientific institution with a diverse suite of experimental and environmental cleanup activities, and the fact that this represents a fundamental change in how waste processing is viewed by the institution. This paper describes the issues involved during the transition to cost recovery and the ultimate selection of the business model. Of the six alternative cost recovery models evaluated, the business model chosen to be implemented in FY2009 is Recharge Plus Generators Pay Distributed Direct. Under this model, all generators who produce waste must pay a distributed direct share associated with their specific waste type to use a waste processing capability. This cost share is calculated using the distributed direct method on the fixed cost only, i.e., the fixed cost share is based on each program's forecast proportion of the total Los Alamos volume forecast of each waste type. (Fixed activities are those required to establish the waste processing capability, i.e., to make the process ready, permitted, certified, and prepared to handle the first unit ofwaste. Therefore, the fixed cost ends at the point just before waste begins 'to be processed. The activities to actually process the waste are considered variable.) The volume of waste actually sent for processing is charged a unit cost based solely on the variable cost of disposing of that waste. The total cost recovered each year is the

  15. Environmental assessment for effluent reduction, Los Alamos National Laboratory, Los Alamos, New Mexico

    SciTech Connect

    1996-09-11

    The Department of Energy (DOE) proposes to eliminate industrial effluent from 27 outfalls at Los Alamos National Laboratory (LANL). The Proposed Action includes both simple and extensive plumbing modifications, which would result in the elimination of industrial effluent being released to the environment through 27 outfalls. The industrial effluent currently going to about half of the 27 outfalls under consideration would be rerouted to LANL`s sanitary sewer system. Industrial effluent from other outfalls would be eliminated by replacing once-through cooling water systems with recirculation systems, or, in a few instances, operational changes would result in no generation of industrial effluent. After the industrial effluents have been discontinued, the affected outfalls would be removed from the NPDES Permit. The pipes from the source building or structure to the discharge point for the outfalls may be plugged, or excavated and removed. Other outfalls would remain intact and would continue to discharge stormwater. The No Action alternative, which would maintain the status quo for LANL`s outfalls, was also analyzed. An alternative in which industrial effluent would be treated at the source facilities was considered but dismissed from further analysis because it would not reasonably meet the DOE`s purpose for action, and its potential environmental effects were bounded by the analysis of the Proposed Action and the No Action alternatives.

  16. Environmental Survey preliminary report, Los Alamos National Laboratory, Los Alamos, New Mexico

    SciTech Connect

    Not Available

    1988-01-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy's (DOE) Los Alamos National Laboratory (LANL), conducted March 29, 1987 through April 17, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the LANL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at the LANL, and interviews with site personnel. The Survey team developed Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by the Idaho National Engineering Laboratory. When completed, the results will be incorporated into the LANL Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the Survey for the LANL. 65 refs., 68 figs., 73 tabs.

  17. Comparing contents of outcome measures in cerebral palsy using the International Classification of Functioning (ICF-CY): a systematic review.

    PubMed

    Schiariti, Veronica; Klassen, Anne F; Cieza, Alarcos; Sauve, Karen; O'Donnell, Maureen; Armstrong, Robert; Mâsse, Louise C

    2014-01-01

    The International Classification of Functioning children and youth version (ICF-CY) provides a universal framework for defining and classifying functioning and disability in children worldwide. To facilitate the application of the ICF in practice, ICF based-tools like the "ICF Core Sets" are being developed. In the context of the development of the ICF-CY Core Sets for children with Cerebral Palsy (CP), the aims of this study were as follows: to identify and compare the content of outcome measures used in studies of children with CP using the ICF-CY coding system; and to describe the most frequently addressed areas of functioning in those studies. We searched multiple databases likely to capture studies involving children with CP from January 1998 to March 2012. We included all English language articles that studied children aged 2-18 years and described an interventional or observational study. Constructs of the outcome measures identified in studies were linked to the ICF-CY by two trained professionals. We found 231 articles that described 238 outcome measures. The outcome measures contained 2193 concepts that were linked to the ICF-CY and covered 161 independent ICF-CY categories. Out of the 161 categories, 53 (33.5%) were related to body functions, 75 (46%) were related to activities/participation, 26 (16.1%) were related to environmental factors, and 7 (4.3%) were related to body structures. This systematic review provides information about content of measures that may guide researchers and clinicians in their selection of an outcome measure for use in a study and/or clinical practice with children with CP.

  18. Commercialization of Los Alamos National Laboratory technologies via small businesses. Final report

    SciTech Connect

    Brice, R.; Carton, D.; Rhyne, T.

    1997-06-01

    Appendices are presented from a study performed on a concept model system for the commercialization of Los Alamos National Laboratory technologies via small businesses. Topics include a summary of information from the joint MCC/Los Alamos technology conference; a comparison of New Mexico infrastructure to other areas; a typical licensing agreement; technology screening guides; summaries of specific DOE/UC/Los Alamos documents; a bibliography; the Oak Ridge National Laboratory TCRD; The Ames Center for Advanced Technology Development; Los Alamos licensing procedures; presentation of slides from monthly MCC/Los Alamos review meetings; generalized entrepreneurship model; and a discussion on receiving equity for technology.

  19. Igniting the Light Elements: The Los Alamos Thermonuclear Weapon Project, 1942-1952

    SciTech Connect

    Fitzpatrick, Anne C.

    1999-07-01

    The American system of nuclear weapons research and development was conceived and developed not as a result of technological determinism, but by a number of individual architects who promoted the growth of this large technologically-based complex. While some of the technological artifacts of this system, such as the fission weapons used in World War II, have been the subject of many historical studies, their technical successors--fusion (or hydrogen) devices--are representative of the largely unstudied highly secret realms of nuclear weapons science and engineering. In the postwar period a small number of Los Alamos Scientific Laboratory's staff and affiliates were responsible for theoretical work on fusion weapons, yet the program was subject to both the provisions and constraints of the US Atomic Energy Commission, of which Los Alamos was a part. The Commission leadership's struggle to establish a mission for its network of laboratories, least of all to keep them operating, affected Los Alamos's leaders' decisions as to the course of weapons design and development projects. Adapting Thomas P. Hughes's ''large technological systems'' thesis, I focus on the technical, social, political, and human problems that nuclear weapons scientists faced while pursuing the thermonuclear project, demonstrating why the early American thermonuclear bomb project was an immensely complicated scientific and technological undertaking. I concentrate mainly on Los Alamos Scientific Laboratory's Theoretical, or T, Division, and its members' attempts to complete an accurate mathematical treatment of the ''Super''--the most difficult problem in physics in the postwar period--and other fusion weapon theories. Although tackling a theoretical problem, theoreticians had to address technical and engineering issues as well. I demonstrate the relative value and importance of H-bomb research over time in the postwar era to scientific, politician, and military participants in this project. I

  20. Science and code validation program to secure ignition on LMJ

    NASA Astrophysics Data System (ADS)

    Lefebvre, E.; Boniface, C.; Bonnefille, M.; Casner, A.; Esnault, C.; Galmiche, D.; Gauthier, P.; Girard, F.; Gisbert, R.; Leidinger, J.-P.; Loiseau, P.; Masse, L.; Masson-Laborde, P.-E.; Mignon, P.; Monteil, M.-C.; Seytor, P.; Tassin, V.

    2016-03-01

    The CEA/DAM ICF experimental program is currently conducted on LIL and Omega with the goal of improving our simulation tool, the FCI2 code. In this effort, we focus on typical ICF observables: hohlraum radiation drive history, capsule core shape and neutron emission history, hydrodynamic instability growth. In addition to integrated experiment, specific designs are also helpful to pinpoint a particular phenomenon. In this article, we review our current efforts and status, and our future projects on Omega and LMJ.

  1. Monitoring Sensitive Bat Species at Los Alamos National Laboratory

    SciTech Connect

    Schoenberg, Kari M.

    2014-01-15

    Bats play a critical role in ecosystems and are vulnerable to disturbance and disruption by human activities. In recent decades, bat populations in the United States and elsewhere have decreased tremendously. There are 47 different species of bat in the United States and 28 of these occur in New Mexico with 15 different species documented at the Los Alamos National Laboratory (LANL) and surrounding areas. Euderma maculatum(the spotted bat) is listed as “threatened” by the state of New Mexico and is known to occur at LANL. Four other species of bats are listed as “sensitive” and also occur here. In 1995, a four year study was initiated at LANL to assess the status of bat species of concern, elucidate distribution and relative abundance, and obtain information on roosting sites. There have been no definitive studies since then. Biologists in the Environmental Protection Division at LANL initiated a multi-year monitoring program for bats in May 2013 to implement the Biological Resources Management Plan. The objective of this ongoing study is to monitor bat species diversity and seasonal activity over time at LANL. Bat species diversity and seasonal activity were measured using an acoustic bat detector, the Pettersson D500X. This ultrasound recording unit is intended for long-term, unattended recording of bat and other high frequency animal calls. During 2013, the detector was deployed at two locations around LANL. Study sites were selected based on proximity to water where bats may be foraging. Recorded bat calls were analyzed using Sonobat, software that can help determine specific species of bat through their calls. A list of bat species at the two sites was developed and compared to lists from previous studies. Species diversity and seasonal activity, measured as the number of call sequences recorded each month, were compared between sites and among months. A total of 17,923 bat calls were recorded representing 15 species. Results indicate that there is a

  2. PROCESS MODELING AND ANALYSIS FOR RECOVERY OF PUBE SOURCES AT LOS ALAMOS

    SciTech Connect

    D. KORNREICH; ET AL

    2000-11-01

    Los Alamos National Laboratory maintains one of the premier plutonium processing facilities in the country. The plutonium facility supports several defense- and nondefense-related missions. This paper describes process-modeling efforts focused on the operations related to the Radioactive Source Recovery Program, which recovers the plutonium from plutonium-beryllium neutron sources. This program accomplishes at least two goals: it is evidence of good stewardship of a national resource, plutonium, and destroys a potential health hazard, the neutron source, by separating the plutonium from the beryllium in sources that are no longer being used in various industries or the military. We examine the processes related to source recovery operations in terms of throughput, ionizing radiation exposure to workers, and mass balances using two discrete-event simulation tools: Extend{trademark}, which is commercially available; and ProMoS, which is in-house software specifically tailored for modeling nuclear-materials operations.

  3. Implementation of the DYMAC system at the new Los Alamos Plutonium Processing Facility. Phase II report

    SciTech Connect

    Malanify, J.J.; Amsden, D.C.

    1982-08-01

    The DYnamic Materials ACcountability System - called DYMAC - performs accountability functions at the new Los Alamos Plutonium Processing Facility where it began operation when the facility opened in January 1978. A demonstration program, DYMAC was designed to collect and assess inventory information for safeguards purposes. It accomplishes 75% of its design goals. DYMAC collects information about the physical inventory through deployment of nondestructive assay instrumentation and video terminals throughout the facility. The information resides in a minicomputer where it can be immediately sorted and displayed on the video terminals or produced in printed form. Although the capability now exists to assess the collected data, this portion of the program is not yet implemented. DYMAC in its present form is an excellent tool for process and quality control. The facility operator relies on it exclusively for keeping track of the inventory and for complying with accountability requirements of the US Department of Energy.

  4. The Los Alamos Laser Acceleration of Particles Workshop and beginning of the advanced accelerator concepts field

    NASA Astrophysics Data System (ADS)

    Joshi, C.

    2012-12-01

    The first Advanced Acceleration of Particles-AAC-Workshop (actually named Laser Acceleration of Particles Workshop) was held at Los Alamos in January 1982. The workshop lasted a week and divided all the acceleration techniques into four categories: near field, far field, media, and vacuum. Basic theorems of particle acceleration were postulated (later proven) and specific experiments based on the four categories were formulated. This landmark workshop led to the formation of the advanced accelerator R&D program in the HEP office of the DOE that supports advanced accelerator research to this day. Two major new user facilities at Argonne and Brookhaven and several more directed experimental efforts were built to explore the advanced particle acceleration schemes. It is not an exaggeration to say that the intellectual breadth and excitement provided by the many groups who entered this new field provided the needed vitality to then recently formed APS Division of Beams and the new online journal Physical Review Special Topics-Accelerators and Beams. On this 30th anniversary of the AAC Workshops, it is worthwhile to look back at the legacy of the first Workshop at Los Alamos and the fine groundwork it laid for the field of advanced accelerator concepts that continues to flourish to this day.

  5. Grid generation software engineering at Los Alamos

    SciTech Connect

    Clark, G.L.; Ankeny, L.A.

    1988-01-01

    We have collected and re-engineered a small library of computer codes for general-purpose grid generation in one-, two-, and three-dimensional domains. The design intent was to produce easy-to-use general purpose codes that are portable to as many different hardware and software environments as practical, that are consistent in programming style and user interface, and that cover a gamut of applications. The paper describes some of the features of the codes, emphasizing the perspective of the potential user or programmer, rather than that of the researcher interested in mathematical techniques. 7 refs., 3 figs.

  6. Introduction to the international classification of functioning disability and health - ICF - in the context of vestibular rehabilitation.

    PubMed

    Graziano, Mariella

    2013-01-01

    Vestibular rehabilitation focuses at decreasing the impact of symptoms, such as vertigo dizziness and imbalance have on people's daily life and their role in society. The international Classification of Functioning Disability and Health - ICF offers a unified and standard language and framework for describing health and health related states. The ICF aims at facilitating communication information about health, like functioning and disability. For this purpose the ICF has a systematic coding scheme for health data with more than 1400 categories. The big number of categories is impractical to apply in a specific area like vestibular disorders. Therefore a narrowing down to the relevant categories in a comprehensive core set for vertigo (100 categories) and a brief core set (29 categories) were developed. The purpose of this article is to reflect on the potential use of ICF in vestibular rehabilitation.

  7. [ICF and social medicine evaluation of capability of gainful activity: is everything clear?--a discussion article].

    PubMed

    Körner, M

    2005-08-01

    The ICF (International Classification of Functioning, Disability and Health) calls attention to the complexities associated with disturbances of health. The question raised is how the various constituents and the resulting network as defined by this Classification can gain importance for medical expertise under the statutory pension insurance scheme concerning work-related capacity. Possible variations of strategy are discussed: clinical intuition, algorithmic pathways, proved medical diagnostics, particular diagnostics of activity according to ICF. A genuine "silver bullet" is not in evidence thus far. It cannot be expected that diagnostics relating to a certain sector of the ICF will basically eclipse the rest. Future standards of medical expertise should specify as clearly as possible the impact of the diverse diagnostic findings on the assessment of work-related capacity. Framing emphasis in this way cannot be performed by the ICF on its own.

  8. Effect of initial conditions and Mach number on the Richtmyer-Meshkov instability in ICF like conditions

    NASA Astrophysics Data System (ADS)

    Rao, Pooja; She, Dan; Lim, Hyunkyung; Glimm, James

    2015-11-01

    The qualitative and quantitative effect of initial conditions (linear and non-linear) and high Mach number (1.3 and 1.45) is studied on the turbulent mixing induced by the Richtmyer-Meshkov instability in idealized ICF conditions. The Richtmyer-Meshkov instability seeds Rayleigh-taylor instabilities in ICF experiments and is one of the factors that contributes to reduced performance of ICF experiments. Its also found in collapsing cores of stars and supersonic combustion. We use the Stony Brook University code, FronTier, which is verified via a code comparison study against the AMR multiphysics code FLASH, and validated against vertical shock tube experiments done by the LANL Extreme Fluids Team. These simulations are designed as a step towards simulating more realistic ICF conditions and quantifying the detrimental effects of mixing on the yield.

  9. Feasibility of Applying the Extended ICF Core Set for Stroke to Clinical Settings in Rehabilitation: A Preliminary Study

    PubMed Central

    Han, Kyu Yong; Kim, Hyo Jong

    2015-01-01

    Objective To evaluate the potential feasibility of application of the extended International Classification of Functioning, Disability and Health (ICF) Core Set for stroke. Methods We retrospectively reviewed the medical records of 40 stroke outpatients (>6 months after onset) admitted to the Department of Rehabilitation Medicine for comprehensive rehabilitation. Clinical information of the patients were respectively evaluated to link to the 166 second-level categories of the extended ICF Core Set for stroke. Results Clinical information could be linked to 111 different ICF categories, 58 categories of the body functions component, eight categories of the body structures component, 38 categories of the activities and participation component, and seven categories of the environmental factors component. Conclusion The body functions component might be feasible for application of the extended ICF Core Set for stroke to clinical settings. The activities and participation component and environmental factors component may not be directly applied to clinical settings without additional evaluation tools including interview and questionnaire. PMID:25750873

  10. Annual Report for Los Alamos National Laboratory Technical Area 54, Area G Disposal Facility – Fiscal Year 2015

    SciTech Connect

    French, Sean B.; Stauffer, Philip H.; Birdsell, Kay H.

    2016-02-29

    As a condition to the disposal authorization statement issued to Los Alamos National Laboratory (LANL or the Laboratory) on March 17, 2010, a comprehensive performance assessment and composite analysis maintenance program must be implemented for the Technical Area 54, Area G disposal facility. Annual determinations of the adequacy of the performance assessment and composite analysis (PA/CA) are to be conducted under the maintenance program to ensure that the conclusions reached by those analyses continue to be valid. This report summarizes the results of the fiscal year (FY) 2015 annual review for Area G.

  11. Health professionals identify components of the International Classification of Functioning, Disability and Health (ICF) in questionnaires for the upper limb

    PubMed Central

    Philbois, Stella V.; Martins, Jaqueline; Souza, Cesário S.; Sampaio, Rosana F.; Oliveira, Anamaria S.

    2016-01-01

    BACKGROUND: Several Brazilian studies have addressed the International Classification of Functioning, Disability and Health (ICF), but few have analyzed the knowledge of the health professionals with regards to the ICF. OBJECTIVE: To verify whether the classification of the items in the Brazilian-Portuguese versions of The Shoulder Pain and Disability Index (SPADI) and The Disabilities Arm, Shoulder and Hand (DASH) questionnaires, obtained from health professionals who worked with patients having upper limb injuries, could be related to ICF components as defined by others studies. METHOD: There were 4 participants for the group "professionals with high familiarity of the ICF (PHF)" and 19 for the group of "professionals with some or no familiarity of the ICF (PSNF)". The participants judged whether the items on the two questionnaires belonged to the ICF body function, body structure or activity-participation component, and marked a confidence level for each trial using a numerical scale ranging from zero to 10. The items were classified by the discriminant content validity method using the Student'st-test and the Hochberg correction. The ratings were compared to the literature by the percentage of agreement and Kappa coefficient. RESULTS: The percentage of agreement of the rating from the PSNF and the PHF groups with the literature was equal to or greater than 77%. For the DASH, the agreement of the PSNF and PHF groups with the literature were, respectively, moderate (Kappa=0.46 to 0.48) and substantial (Kappa=0.62 to 0.70). CONCLUSIONS: Health professionals were able to correlate the three components of the ICF for most items on the 2 questionnaires, demonstrating some ease of understanding the ICF components. However, the relation of concept of pain with body function component is not clear for professional and deserves a more attentive approach. PMID:26786076

  12. A NEW GENERATION OF LOS ALAMOS OPACITY TABLES

    SciTech Connect

    Colgan, J.; Kilcrease, D. P.; Magee, N. H.; Sherrill, M. E.; Abdallah, J. Jr.; Hakel, P.; Fontes, C. J.; Guzik, J. A.; Mussack, K. A.

    2016-02-01

    We present a new, publicly available set of Los Alamos OPLIB opacity tables for the elements hydrogen through zinc. Our tables are computed using the Los Alamos ATOMIC opacity and plasma modeling code, and make use of atomic structure calculations that use fine-structure detail for all the elements considered. Our equation of state model, known as ChemEOS, is based on the minimization of free energy in a chemical picture and appears to be a reasonable and robust approach to determining atomic state populations over a wide range of temperatures and densities. In this paper we discuss in detail the calculations that we have performed for the 30 elements considered, and present some comparisons of our monochromatic opacities with measurements and other opacity codes. We also use our new opacity tables in solar modeling calculations and compare and contrast such modeling with previous work.

  13. A New Generation of Los Alamos Opacity Tables

    SciTech Connect

    Colgan, James Patrick; Kilcrease, David Parker; Magee, Jr., Norman H.; Sherrill, Manolo Edgar; Abdallah, Joseph; Hakel, Peter; Fontes, Christopher John; Guzik, Joyce Ann; Mussack Tamashiro, Kathleen Anita

    2016-01-26

    We present a new, publicly available, set of Los Alamos OPLIB opacity tables for the elements hydrogen through zinc. Our tables are computed using the Los Alamos ATOMIC opacity and plasma modeling code, and make use of atomic structure calculations that use fine-structure detail for all the elements considered. Our equation-of-state (EOS) model, known as ChemEOS, is based on the minimization of free energy in a chemical picture and appears to be a reasonable and robust approach to determining atomic state populations over a wide range of temperatures and densities. In this paper we discuss in detail the calculations that we have performed for the 30 elements considered, and present some comparisons of our monochromatic opacities with measurements and other opacity codes. We also use our new opacity tables in solar modeling calculations and compare and contrast such modeling with previous work.

  14. A New Generation of Los Alamos Opacity Tables

    DOE PAGES

    Colgan, James Patrick; Kilcrease, David Parker; Magee, Jr., Norman H.; ...

    2016-01-26

    We present a new, publicly available, set of Los Alamos OPLIB opacity tables for the elements hydrogen through zinc. Our tables are computed using the Los Alamos ATOMIC opacity and plasma modeling code, and make use of atomic structure calculations that use fine-structure detail for all the elements considered. Our equation-of-state (EOS) model, known as ChemEOS, is based on the minimization of free energy in a chemical picture and appears to be a reasonable and robust approach to determining atomic state populations over a wide range of temperatures and densities. In this paper we discuss in detail the calculations thatmore » we have performed for the 30 elements considered, and present some comparisons of our monochromatic opacities with measurements and other opacity codes. We also use our new opacity tables in solar modeling calculations and compare and contrast such modeling with previous work.« less

  15. A new generation of Los Alamos opacity tables

    NASA Astrophysics Data System (ADS)

    Colgan, J.; Kilcrease, D. P.; Magee, N. H.; Abdallah, J.; Sherrill, M. E.; Fontes, C. J.; Hakel, P.; Guzik, J. A.; Mussack, K. A.; Walczak, P.

    2017-03-01

    We review a recently completed set of Los Alamos OPLIB opacity tables for the elements hydrogen through zinc. Our tables have been computed using the Los Alamos ATOMIC code, which makes use of atomic structure calculations that include fine-structure detail for all the elements considered. We utilize an equation-of-state model, known as ChemEOS, that is based on the minimization of free energy in a chemical picture. Recent publications by us have compared our calculations to available experimental opacity data and to other opacity calculations. Our tables are publicly available via our website, and have already been used in solar modeling calculations as well as the modeling of pulsating B-type stars. This proceedings submission will give an overview of our opacity calculations and briefly review the conclusions from the astrophysical modeling.

  16. Airport-Noise Levels and Annoyance Model (ALAMO) user's guide

    NASA Technical Reports Server (NTRS)

    Deloach, R.; Donaldson, J. L.; Johnson, M. J.

    1986-01-01

    A guide for the use of the Airport-Noise Level and Annoyance MOdel (ALAMO) at the Langley Research Center computer complex is provided. This document is divided into 5 primary sections, the introduction, the purpose of the model, and an in-depth description of the following subsystems: baseline, noise reduction simulation and track analysis. For each subsystem, the user is provided with a description of architecture, an explanation of subsystem use, sample results, and a case runner's check list. It is assumed that the user is familiar with the operations at the Langley Research Center (LaRC) computer complex, the Network Operating System (NOS 1.4) and CYBER Control Language. Incorporated within the ALAMO model is a census database system called SITE II.

  17. Los Alamos x-ray characterization facilities for plasma diagnostics

    SciTech Connect

    Day, R.H.; Blake, R.L.; Stradling, G.L.; Trela, W.J.; Bartlett, R.J.

    1986-01-01

    A summary is given of characteristics of x-ray sources used by Los Alamos National Laboratory to calibrate various x-ray diagnostic packages and components. Included are D.C. sourcs in electron impact and fluorescence modes, a pulsed laser source for soft x rays with 100 ps time resolution, Febetron pulsed electron impact sources, and both EUV and x-ray synchrotron beamlines.

  18. Los Alamos National Laboratory's high-performance data system

    SciTech Connect

    Mercier, C.; Chorn, G.; Christman, R.; Collins, B.

    1991-01-01

    Los Alamos National Laboratory is designing a High-Performance Data System (HPDS) that will provide storage for supercomputers requiring large files and fast transfer speeds. The HPDS will meet the performance requirements by managing data transfers from high-speed storage systems connected directly to a high-speed network. File and storage management software will be distributed in workstations. Network protocols will ensure reliable, wide-area network data delivery to support long-distance distributed processing. 3 refs., 2 figs.

  19. Los Alamos Canyon Ice Rink Parking Flood Plain Assessment

    SciTech Connect

    Hathcock, Charles Dean

    2015-02-10

    The project location is in Los Alamos Canyon east of the ice rink facility at the intersection of West and Omega roads (Figure 1). Forty eight parking spaces will be constructed on the north and south side of Omega Road, and a lighted walking path will be constructed to the ice rink. Some trees will be removed during this action. A guardrail of approximately 400 feet will be constructed along the north side of West Road to prevent unsafe parking in that area.

  20. Inertial Confinement Fusion Research at LOS Alamos National Laboratory

    NASA Astrophysics Data System (ADS)

    Batha, S. H.; Albright, B. J.; Alexander, D. J.; Barnes, Cris W.; Bradley, P. A.; Cobble, J. A.; Cooley, J. C.; Cooley, J. H.; Day, R. D.; DeFriend, K. A.; Delamater, N. D.; Dodd, E. S.; Fatherley, V. E.; Fernandez, J. C.; Flippo, K. A.; Grim, G. P.; Goldman, S. R.; Greenfield, S. R.; Herrmann, H. W.; Hoffman, N. M.; Holmes, R. L.; Johnson, R. P.; Keiter, P. A.; Kline, J. L.; Kyrala, G. A.; Lanier, N. E.; Loomis, E.; Lopez, F. E.; Luo, S.; Mack, J. M.; Magelssen, G. R.; Montgomery, D. S.; Nobile, A.; Oertel, J. A.; Reardon, P.; Rose, H. A.; Schmidt, D.; Schmitt, M. J.; Seifter, A.; Shimada, T.; Swift, D. C.; Tierney, T. E.; Welser-Sherrill, L.; Wilke, M. D.; Wilson, D. C.; Workman, J.; Yin, L.

    2009-07-01

    Inertial confinement fusion research at Los Alamos National Laboratory is focused on high-leverage areas of thermonuclear ignition to which LANL can apply its historic strengths and that are complementary to high-energy-density-physics topics. Using the Trident and Omega laser facilities, experiments are pursued in laser-plasma instabilities, symmetry, Be technologies, neutron and fusion-product diagnostics, and defect hydrodynamics.

  1. Los Alamos sequence analysis package for nucleic acids and proteins.

    PubMed Central

    Kanehisa, M I

    1982-01-01

    An interactive system for computer analysis of nucleic acid and protein sequences has been developed for the Los Alamos DNA Sequence Database. It provides a convenient way to search or verify various sequence features, e.g., restriction enzyme sites, protein coding frames, and properties of coded proteins. Further, the comprehensive analysis package on a large-scale database can be used for comparative studies on sequence and structural homologies in order to find unnoted information stored in nucleic acid sequences. PMID:6174934

  2. Stockpile Stewardship at Los Alamos(U)

    SciTech Connect

    Webster, Robert B.

    2012-06-29

    Stockpile stewardship is the retention of nuclear weapons in the stockpile beyond their original design life. These older weapons have potential changes inconsistent with the original design intent and military specifications. The Stockpile Stewardship Program requires us to develop high-fidelity, physics-based capabilities to predict, assess, certify and design nuclear weapons without conducting a nuclear test. Each year, the Lab Directors are required to provide an assessment of the safety, security, and reliability our stockpile to the President of the United States. This includes assessing whether a need to return to testing exists. This is a talk to provide an overview of Stockpile Stewardship's scientific requirements and how stewardship has changed in the absence of nuclear testing. The talk is adapted from an HQ talk to the War college, and historical unclassified talks on weapon's physics.

  3. Los Alamos National Laboratory 4D Database

    SciTech Connect

    Atencio, Julian J.

    2014-05-02

    4D is an integrated development platform - a single product comprised of the components you need to create and distribute professional applications. You get a graphical design environment, SQL database, a programming language, integrated PHP execution, HTTP server, application server, executable generator, and much more. 4D offers multi-platform development and deployment, meaning whatever you create on a Mac can be used on Windows, and vice-versa. Beyond productive development, 4D is renowned for its great flexibility in maintenance and modification of existing applications, and its extreme ease of implementation in its numerous deployment options. Your professional application can be put into production more quickly, at a lower cost, and will always be instantly scalable. 4D makes it easy, whether you're looking to create a classic desktop application, a client-server system, a distributed solution for Web or mobile clients - or all of the above!

  4. 1993 Annual PCB Document for Los Alamos National Laboratory EPA Region VI, January 1, 1993 through December 31, 1993

    SciTech Connect

    Wechsler, R.J.; Sandoval, T.M.; Bryant, D.E.; Hupke, L.; Esquibel, L.

    1995-12-31

    This document, the {open_quotes}1993 Annual PCB Document for Los Alamos National Laboratory{close_quotes} was prepared to fulffill the requirements of the federal PCB (Polychlorinated Biphenyl) regulation: 40 CFR 761 Subpart J General Records and Reports. The PCB Management Program at Los Alamos National Laboratory (LANL), Environmental Protection Group, compiled this 1993 Annual PCB Document. The overall format generally follows the sequence of the applicable regulations. Subsection 1.2 cross references those regulatory requirements with the applicable Document Section. The scope of this document also includes status summaries of various aspects of LANL`s PCB Management Program. The intent of this approach to the Annual Document is to provide an overview of LANL`s PCB Management Program and to increase the usefulness of this document as a management tool. Section 2.0, {open_quotes}Status of the PCB Management Program{close_quotes}, discusses the use, generation of waste, and storage of PCBs at LANL. Section 3.0 is the 1993 Annual Document Log required by 761.180(a). This Section also discusses the PCB Management Program`s policies for reporting under those regulatory requirements. Sections 4.0 and 5.0 contain the 1993 Annual Records for off-site and on-site disposal as required by 761.180(b). There is a tab for each manifest and its associated continuation sheets, receipt letters, and certificates of disposal.

  5. A concept of needs-oriented design and evaluation of assistive robots based on ICF.

    PubMed

    Matsumoto, Yoshio; Nishida, Yoshifumi; Motomura, Yoichi; Okawa, Yayoi

    2011-01-01

    In the robotics community, a great number of assistive robots for elderly and handicapped people have been developed in the past few decades. However, very few of them became commercially available. It is often claimed that the major problems for the commercialization of robotic technologies are the "cost" and the "safety." However we believe that the mismatch of "needs in daily lives" and "seeds in the technologies" is also a major problem. In this paper, we describe our novel ideas on the development of assistive robots which fit the real needs of users based on ICF (International Classification of Functioning, Disability and Health), which is a part of the WHO Family of International Classifications for describing whole activities of a person in daily lives. By utilizing ICF, the development process of assistive robots - analyzing and discovering needs in daily lives, designing robots and evaluating the products - will be achieved in an objective manner.

  6. Interaction of high power laser beams with plasma in ICF hohlraum using the FDTD method

    NASA Astrophysics Data System (ADS)

    Lin, Zhili

    2016-11-01

    In the indirect-drive Inertial confinement fusion (ICF) system, groups of laser beams are injected into a gold cylindrical hohlraum and plasma is stimulated with the ablation of the wall of hohlraum by the laser beams. In our work, the finite-difference time-domain (FDTD) method associated with the bilinear transform and Maclaurin series expansion approaches is utilized to examine the laser beam propagation in plasma described by the Drude model. The state-of-the-art approaches for generating the laser beams are presented and realized according to the full utilization of the TF/SF source condition. Base on the previous technologies, the quantitatively numerical analysis of the propagation characteristics of laser beams in the plasma is conducted. The obtained results are illustrated and discussed that are helpful for the parameter optimization of laser beams for an ICF system.

  7. Vesicourethral reflux-induced renal failure in a patient with ICF syndrome due to a novel DNMT3B mutation.

    PubMed

    Kutluğ, Seyhan; Ogur, Gönül; Yilmaz, Aysegül; Thijssen, Peter E; Abur, Ummet; Yildiran, Alisan

    2016-12-01

    ICF syndrome is a primary immunodeficiency disease characterized by hypo- or agammaglobulinemia, centromeric instability mainly on chromosomes 1, 9, and 16 and facial anomalies. ICF syndrome presents with frequent respiratory tract infections in infancy. A 20-month-old female patient was referred to our clinic due to frequent lower respiratory tract infections. ICF syndrome was considered because of comorbidity of hypogammaglobulinemia, facial anomalies, and neuromotor growth retardation. Metaphase chromosome analysis revealed centromeric instability on chromosomes 1, 9, and 16 and through Sanger a previously unreported homozygous missense mutation (c.1805T>C; [p.V602A]) was identified in the DNMT3B, confirming ICF1. The patient was found to have a breakdown in renal function 1 year later; the urinary system was examined and bilateral vesicoureteral reflux was found, warranting the need for dialysis in time. This report expands the mutation spectrum of ICF1 and is the first to describe bilateral vesicoureteral reflux accompanying ICF syndrome. © 2016 Wiley Periodicals, Inc.

  8. Vocational rehabilitation from the client's perspective using the International Classification of Functioning, Disability and Health (ICF) as a reference.

    PubMed

    Glässel, Andrea; Finger, Monika E; Cieza, Alarcos; Treitler, Christine; Coenen, Michaela; Escorpizo, Reuben

    2011-06-01

    INTRODUCTION A mixed-methods (qualitative-quantitative), multicenter study was conducted using a focus group design to explore the lived experiences of persons in vocational rehabilitation (VR) with regard to functioning and contextual factors using six open-ended questions related to the ICF components. The results were classified by using the International Classification of Functioning, Disability and Health (ICF) as a frame of reference. METHODS The meaningful concepts within the transcribed data were identified and linked to ICF categories according to established linking rules. RESULTS The seven focus groups with 26 participants yielded a total of 4,813 relevant concepts which were linked to a total of 160 different second-level ICF categories. From the client perspective, the ICF components (a) body functions, (b) activities and participation and (c) environmental factors were equally represented, while (d) body structures appeared less frequently. Out of the total number of concepts, 864 concepts (18%) were assigned to the ICF component personal factors which is not yet classified but could indicate important aspects of resource management and strategy development of patients in VR. CONCLUSION Therefore, VR of patients must not be limited to anatomical and pathophysiologic changes, but should also consider a more comprehensive view which includes client's demands, strategies and resources in daily life and the context around the individual and social circumstances of their work situation.

  9. Los Alamos, Toshiba probing Fukushima with cosmic rays

    SciTech Connect

    Morris, Christopher

    2014-06-16

    Los Alamos National Laboratory has announced an impending partnership with Toshiba Corporation to use a Los Alamos technique called muon tomography to safely peer inside the cores of the Fukushima Daiichi reactors and create high-resolution images of the damaged nuclear material inside without ever breaching the cores themselves. The initiative could reduce the time required to clean up the disabled complex by at least a decade and greatly reduce radiation exposure to personnel working at the plant. Muon radiography (also called cosmic-ray radiography) uses secondary particles generated when cosmic rays collide with upper regions of Earth's atmosphere to create images of the objects that the particles, called muons, penetrate. The process is analogous to an X-ray image, except muons are produced naturally and do not damage the materials they contact. Muon radiography has been used before in imaginative applications such as mapping the interior of the Great Pyramid at Giza, but Los Alamos's muon tomography technique represents a vast improvement over earlier technology.

  10. Los Alamos Science: The Human Genome Project. Number 20, 1992

    DOE R&D Accomplishments Database

    Cooper, N. G.; Shea, N. eds.

    1992-01-01

    This document provides a broad overview of the Human Genome Project, with particular emphasis on work being done at Los Alamos. It tries to emphasize the scientific aspects of the project, compared to the more speculative information presented in the popular press. There is a brief introduction to modern genetics, including a review of classic work. There is a broad overview of the Genome Project, describing what the project is, what are some of its major five-year goals, what are major technological challenges ahead of the project, and what can the field of biology, as well as society expect to see as benefits from this project. Specific results on the efforts directed at mapping chromosomes 16 and 5 are discussed. A brief introduction to DNA libraries is presented, bearing in mind that Los Alamos has housed such libraries for many years prior to the Genome Project. Information on efforts to do applied computational work related to the project are discussed, as well as experimental efforts to do rapid DNA sequencing by means of single-molecule detection using applied spectroscopic methods. The article introduces the Los Alamos staff which are working on the Genome Project, and concludes with brief discussions on ethical, legal, and social implications of this work; a brief glimpse of genetics as it may be practiced in the next century; and a glossary of relevant terms.

  11. Los Alamos Science: The Human Genome Project. Number 20, 1992

    SciTech Connect

    Cooper, N G; Shea, N

    1992-01-01

    This article provides a broad overview of the Human Genome Project, with particular emphasis on work being done at Los Alamos. It tries to emphasize the scientific aspects of the project, compared to the more speculative information presented in the popular press. There is a brief introduction to modern genetics, including a review of classic work. There is a broad overview of the Genome Project, describing what the project is, what are some of its major five-year goals, what are major technological challenges ahead of the project, and what can the field of biology, as well as society expect to see as benefits from this project. Specific results on the efforts directed at mapping chromosomes 16 and 5 are discussed. A brief introduction to DNA libraries is presented, bearing in mind that Los Alamos has housed such libraries for many years prior to the Genome Project. Information on efforts to do applied computational work related to the project are discussed, as well as experimental efforts to do rapid DNA sequencing by means of single-molecule detection using applied spectroscopic methods. The article introduces the Los Alamos staff which are working on the Genome Project, and concludes with brief discussions on ethical, legal, and social implications of this work; a brief glimpse of genetics as it may be practiced in the next century; and a glossary of relevant terms.

  12. Los Alamos, Toshiba probing Fukushima with cosmic rays

    ScienceCinema

    Morris, Christopher

    2016-07-12

    Los Alamos National Laboratory has announced an impending partnership with Toshiba Corporation to use a Los Alamos technique called muon tomography to safely peer inside the cores of the Fukushima Daiichi reactors and create high-resolution images of the damaged nuclear material inside without ever breaching the cores themselves. The initiative could reduce the time required to clean up the disabled complex by at least a decade and greatly reduce radiation exposure to personnel working at the plant. Muon radiography (also called cosmic-ray radiography) uses secondary particles generated when cosmic rays collide with upper regions of Earth's atmosphere to create images of the objects that the particles, called muons, penetrate. The process is analogous to an X-ray image, except muons are produced naturally and do not damage the materials they contact. Muon radiography has been used before in imaginative applications such as mapping the interior of the Great Pyramid at Giza, but Los Alamos's muon tomography technique represents a vast improvement over earlier technology.

  13. Recent developments in the Los Alamos National Laboratory Plutonium Facility Waste Tracking System-automated data collection pilot project

    SciTech Connect

    Martinez, B.; Montoya, A.; Klein, W.

    1999-02-01

    The waste management and environmental compliance group (NMT-7) at the Los Alamos National Laboratory has initiated a pilot project for demonstrating the feasibility and utility of automated data collection as a solution for tracking waste containers at the Los Alamos National Laboratory Plutonium Facility. This project, the Los Alamos Waste Tracking System (LAWTS), tracks waste containers during their lifecycle at the facility. LAWTS is a two-tiered system consisting of a server/workstation database and reporting engine and a hand-held data terminal-based client program for collecting data directly from tracked containers. New containers may be added to the system from either the client unit or from the server database. Once containers are in the system, they can be tracked through one of three primary transactions: Move, Inventory, and Shipment. Because LAWTS is a pilot project, it also serves as a learning experience for all parties involved. This paper will discuss many of the lessons learned in implementing a data collection system in the restricted environment. Specifically, the authors will discuss issues related to working with the PPT 4640 terminal system as the data collection unit. They will discuss problems with form factor (size, usability, etc.) as well as technical problems with wireless radio frequency functions. They will also discuss complications that arose from outdoor use of the terminal (barcode scanning failures, screen readability problems). The paper will conclude with a series of recommendations for proceeding with LAWTS based on experience to date.

  14. VizieR Online Data Catalog: Star forming regions sulphur ICFs (Dors+, 2016)

    NASA Astrophysics Data System (ADS)

    Dors, O. L.; Perez-Montero, E.; Hagele, G. F.; Cardaci, M. V.; Krabbe, A. C.

    2016-10-01

    We compiled from the literature emission-line intensities of HII regions and star-forming galaxies obtained in the optical and infrared spectral ranges. These measurements were used to obtain sulphur and oxygen ionic abundances in order to verify if our photoionization models are representative of real HIi regions, to check if the theoretical ICFs are compatible with the ones derived directly from observations and investigating the S/O-O/H relation. (5 data files).

  15. Effect of High-Z Doping on ICF TN Performance and Ignition

    NASA Astrophysics Data System (ADS)

    Wang, Yi-Ming

    2013-10-01

    One of the challenges of ICF ignition is to achieve desired areal density ρR of the hot-spot region so that a self-sustained TN burn could be initiated and maintained. The recent study of the NIC data indicated that the areal density ρR of the hot-spot inferred by the DSR was lower than the ignition requirement set by ITF. In this work, we will study the effect of Hi-Z doping in the DT gas on the ICF TN performance. The mechanism of the high-Z doping is to utilize additional radiative cooling of high-Z doping during the implosion phase of the evolution so that the gas cavity will follow a lower adiabatic path. This allows a more isothermal compression of the gas to a high density and ρR at the center of the target. The radiative cooling caused by mixing of high Z material into the gas region was considered to degrade to the performance of ICF capsule. However, a trace of high-Z doping enhances both the TN performance as well as the hot-spot ρR. Overall, for a transparent pusher design, over 38% of improvement of gas (hot-spot) ρR and over 200% increase of the yield rate compared to the baseline design have been achieved using this. For an opaque pusher design, no TN performance improvement had been observed in calculation. Work supported by the Department of Energy.

  16. Application of spectral line shapes to the study of high density ICF plasmas

    SciTech Connect

    Keane, C.J.; Hammel, B.A.; Langer, S.H.; Lee, R.W.; Calisti, A.; Godbert, L.; Stamm, R.; Talin, B.

    1994-09-01

    Spectral line broadening manifests itself in the study of high density inertial confinement fusion (ICF) plasmas in two important ways. First, comparison between measured and calculated lineshapes of individual spectral lines or groups of lines is used to diagnose plasma conditions in dense ICF plasmas, particularly in implosions. Secondly, through the emission and absorption coefficients spectral lineshapes serve as important inputs to plasma spectroscopy simulation codes which calculate simulated spectra from ICF targets. We discuss recent results from each of these areas. With regard to lineshape diagnostics, the advent of generalized line broadening codes has allowed the line profiles of complex multielectron emitters to be considered for diagnostic purposes. Particular example of this is the use of Ar He-{beta} and its associated dielectronic satellites as a diagnostic of T{sub e} and N{sub e}, as well as the development of Ne-like Xe line broadening as a density diagnostic. With respect to simulation codes, the implementation of detailed lineshapes in calculations of this type is in many ways in its infancy. We present here examples of cases where effects related to spectral lineshapes such as continuum lowering and line transfer of Stark broadened lines are important so as to provide a stimulus for future work in this field. 34 refs., 9 figs., 1 tab.

  17. Mapping SAGE questionnaire to the International Classification of Functioning, Disability and Health (ICF).

    PubMed

    Raggi, Alberto; Quintas, Rui; Russo, Emanuela; Martinuzzi, Andrea; Costardi, Daniela; Frisoni, Giovanni Battista; Franco, Maria Grazia; Andreotti, Alessandra; Ojala, Matti; Peña, Sebastián; Perales, Jaime; Chatterji, Somnath; Miret, Marta; Tobiasz-Adamczyk, Beata; Koskinen, Seppo; Frattura, Lucilla; Leonardi, Matilde

    2014-01-01

    The collaborative research on ageing in Europe protocol was based on that of the World Health Organization Study on global AGEing and adult health (SAGE) project that investigated the relationship between health and well-being and provided a set of instruments that can be used across countries to monitor health and health-related outcomes of older populations as well as the strategies for addressing issues concerning the ageing process. To evaluate the degree to which SAGE protocol covered the spectrum of disability given the scope of the World Health Organization International Classification of Functioning, Disability and Health (ICF), a mapping exercise was performed with SAGE protocol. Results show that the SAGE protocol covers ICF domains in a non-uniform way, with environmental factors categories being underrepresented, whereas mental, cardiovascular, sensory functions and mobility were overrepresented. To overcome this partial coverage of ICF functioning categories, new assessment instruments have been developed. PRACTITIONER MESSAGE: Mapping exercises are valid procedures to understand the extent to which a survey protocol covers the spectrum of functioning. The mapping exercise with SAGE protocol shows that it provides only a partial representation of body functions and activities and participation domains, and the coverage of environmental factors is poor. New instruments are therefore needed for researchers to properly understand the health and disability of ageing populations.

  18. Sol-gel optical thin films for an advanced megajoule-class Nd:glass laser ICF-driver

    SciTech Connect

    Floch, H.G.; Belleville, P.F.; Pegon, P.M.; Dijonneau, C.S.; Guerain, J.

    1995-12-31

    It is well established by manufacturers and users that optical coatings are generally prepared by the well known Physical Vapor Deposition (PVD) technology. In the authors` opinion sol-gel technology is an effective and competitive alternative. The aim of this paper is to emphasize on the sol-gel thin film work carried out at Centre d`Etudes de Limeil-Valenton (CEL-V) and concerning the technology for high power lasers. The authors will briefly discuss the chemistry of the sol-gel process, the production of optical coatings and the related deposition techniques. Finally, the paper describes the preparation and performance of sol-gel optical coatings they have developed to fulfill the requirements of a future 2 MJ/500 TW (351 nm) pulsed Nd:glass laser so-called LMJ (Laser MegaJoules). This powerful laser is to be used for their national Inertial Confinement Fusion (ICF) program, to demonstrate at the laboratory scale, ignition of deuterium-tritium fusion fuel. Moreover, the aim of this article is, hopefully, to provide a convincing argument that coatings and particularly optical coatings, are some of the useful products available from sol-gel technology, and that exciting developments in other areas are almost certain to emerge within the coming decade.

  19. Sol-gel optical thin films for an advanced megajoule-class Nd:glass laser ICF driver

    NASA Astrophysics Data System (ADS)

    Floch, Herve G.; Belleville, Philippe F.; Pegon, Philippe M.; Dijonneau, Corinne S.; Guerain, Jacques R.

    1995-12-01

    It is well established by manufacturers and users that optical coatings are generally prepared by the well known physical vapor deposition (PVD) technology. In the authors' opinion sol-gel technology is an effective and competitive alternative. The aim of this paper is to emphasize the sol-gel thin film work carried out at Centre d'Etudes de Limeil-Valenton (CEL-V) and concerning the technology for high power lasers. We briefly discuss the chemistry of the sol- gel process, the production of optical coatings, and the related deposition techniques. Finally, the paper describes the preparation and performance of sol-gel optical coatings we have developed to fulfill the requirements of a future 2 MJ/500 TW (351 nm) pulsed Nd:glass laser so-called LMJ (Laser MegaJoules). This powerful laser is to be used for our national inertial confinement fusion (ICF) program, to demonstrate at the laboratory scale, ignition of deuterium-tritium fusion fuel. Moreover, the aim of this article is, hopefully, to provide a convincing argument that coatings and particularly optical coatings, are some of the useful products available from sol-gel technology , and that exciting developments in other areas are almost certain to emerge within the coming decade.

  20. Waste minimization value engineering workshop for the Los Alamos National Laboratory Omega West Reactor Decommissioning Project

    SciTech Connect

    Hartnett, S.; Seguin, N.; Burns, M.

    1995-12-31

    The Los Alamos National Laboratory Pollution Prevention Program Office sponsored a Value Engineering (VE) Workshop to evaluate recycling options and other pollution prevention and waste minimization (PP/WMin) practices to incorporate into the decommissioning of the Omega West Reactor (OWR) at the laboratory. The VE process is an organized, systematic approach for evaluating a process or design to identify cost saving opportunities, or in this application, waste reduction opportunities. This VE Workshop was a facilitated process that included a team of specialists in the areas of decontamination, decommissioning, PP/WMin, cost estimating, construction, waste management, recycling, Department of Energy representatives, and others. The uniqueness of this VE Workshop was that it used an interdisciplinary approach to focus on PP/WMin practices that could be included in the OWR Decommissioning Project Plans and specifications to provide waste reduction. This report discusses the VE workshop objectives, summarizes the OWR decommissioning project, and describes the VE workshop activities, results, and lessons learned.

  1. Structural testing of the Los Alamos National Laboratory Heat Source/Radioisotopic Thermoelectric Generator shipping container

    SciTech Connect

    Bronowski, D.R.; Madsen, M.M.

    1991-06-01

    The Heat Source/Radioisotopic Thermoelectric Generator shipping container is a Type B packaging design currently under development by Los Alamos National Laboratory. Type B packaging for transporting radioactive material is required to maintain containment and shielding after being exposed to the normal and hypothetical accident environments defined in Title 10 Code of Federal Regulations Part 71. A combination of testing and analysis is used to verify the adequacy of this package design. This report documents the test program portion of the design verification, using several prototype packages. Four types of testing were performed: 30-foot hypothetical accident condition drop tests in three orientations, 40-inch hypothetical accident condition puncture tests in five orientations, a 21 psi external overpressure test, and a normal conditions of transport test consisting of a water spray and a 4 foot drop test. 18 refs., 104 figs., 13 tabs.

  2. The Los Alamos neutron spectrometer for the Lunar Scout-1 mission

    NASA Technical Reports Server (NTRS)

    Auchampaugh, George; Barraclough, Bruce; Byrd, Roger; Drake, Darrell; Feldman, William; Moss, Calvin; Reedy, Robert

    1993-01-01

    We review the current status of the Los Alamos program to develop a neutron spectrometer for the Lunar Scout-1 mission, which is the first of two such missions to obtain global compositional, gravity, topography, and image maps of the lunar surface during nominal one-year missions. The neutron spectrometer will measure fast and slow (epithermal and thermal) neutrons in the ranges of 0.5 MeV to 25 MeV and 0.01 eV to more than 1 keV, respectively. The neutron spectrometer will consist of two independent instruments, a fast-neutron one, and a thermal and epithermal one. The measured neutron fluxes are very sensitive to hydrogen in the top meter of the lunar surface and provide additional information about lunar composition.

  3. Remedial action at the Acid/Pueblo Canyon site, Los Alamos, New Mexico. Final report

    SciTech Connect

    1984-10-01

    The Acid/Pueblo Canyon site (TA-45) was designated in 1976 for remedial action under the Formerly Utilized Sites Remedial Action Program (FUSRAP). During the period 1943 to 1964 untreated and treated liquid wastes generated by nuclear weapons research activities at the Los Alamos Scientific Laboratory (LASL) were discharged into the two canyons. A survey of the site conducted by LASL in 1976 to 1977 identified two areas where radiological contamination exceeded criteria levels. The selected remedial action was based on extensive radiological characterization and comprehensive engineering assessments and comprised the excavation and disposal of 390 yd/sup 3/ of contaminated soil and rock. This document describes the background to the remedial action, the parties involved in administering and executing it, the chronology of the work, verification of the adequacy of the remedial action, and the cost incurred. 14 references, 5 figures, 5 tables.

  4. Toolbox of multiple-item measures aligning with the ICF Core Sets for children and youth with cerebral palsy.

    PubMed

    Schiariti, Verónica; Tatla, Sandy; Sauve, Karen; O'Donnell, Maureen

    2017-03-01

    Selecting appropriate measure(s) for clinical and/or research applications for children and youth with Cerebral Palsy (CP) poses many challenges. The newly developed International Classification of Functioning, Disability and Health (ICF) Core Sets for children and youth with CP serve as universal guidelines for assessment, intervention and follow-up. The aims of this study were: 1) to identify valid and reliable measures used in studies with children and youth with CP, 2) to characterize the content of each measure using the ICF Core Sets for children and youth with CP as a framework, and finally 3) to create a toolbox of psychometrically sound measures covering the content of each ICF Core Set for children and youth with CP. All clearly defined multiple-item measures used in studies with CP between 1998 and 2015 were identified. Psychometric properties were extracted when available. Construct of the measures were linked to the ICF Core Sets. Overall, 83 multiple-item measures were identified. Of these, 68 measures (80%) included reliability and validity testing. The majority of the measures were discriminative, generic and designed for school-aged children. The degree to which measures with proven psychometric properties represented the ICF Core Sets for children and youth with CP varied considerably. Finally, 25 valid and reliable measures aligned highly with the content of the ICF Core Sets, and as such, these measures are proposed as a novel ICF Core Sets-based toolbox of measures for CP. Our results will guide professionals seeking appropriate measures to meet their research and clinical needs worldwide.

  5. Health promotion and education: application of the ICF in the US and Canada using an ecological perspective.

    PubMed

    Howard, David; Nieuwenhuijsen, Els R; Saleeby, Patricia

    2008-01-01

    Health promotion is an issue comprised of complex and multi-layered concepts that involves a process of enabling people to increase control over and improve their health. The aims and applications of the World Health Organization's International Classification of Functioning, Disability and Health (ICF), with its focus on components of functioning, activities and participation, and environmental factors are salient to health promotion and health education efforts. For individuals with or without disabilities, health promotion occurs within the community in which they reside and is influenced by a complex interaction of personal and environmental factors. The aim of this paper is to discuss how the ICF can be useful in enhancing social change through health promotion and health education for all people, in particular those with disabilities and chronic conditions. In doing so health promotion concepts and the ecological approach linked with the ICF, the relationship of social change and social support to the ICF, the potential role of the ICF for national and local (city) policies, and the role of health professionals in this process will be examined. Building on this body of knowledge, the authors recommend that future research should focus on the relationship between policies and the social participation of people with disabilities in the community, the use of ICF measurement tools to improve the indicators established by the National Organization on Disability, the development of a new ICF core set for community accessibility and inclusion, better interventions to enhance social support, and enhancing the role of professionals in health promotion for people with disabilities or chronic health conditions.

  6. FY15 LLNL OMEGA Experimental Programs

    SciTech Connect

    Heeter, R. F.; Baker, K. L.; Barrios, M. A.; Beckwith, M. A.; Casey, D. T.; Celliers, P. M.; Chen, H.; Coppari, F.; Fournier, K. B.; Fratanduono, D. E.; Frenje, J.; Huntington, C. M.; Kraus, R. G.; Lazicki, A. E.; Martinez, D. A.; McNaney, J. M.; Millot, M. A.; Pak, A. E.; Park, H. S.; Ping, Y.; Pollock, B. B.; Smith, R. F.; Wehrenberg, C. E.; Widmann, K.; Collins, G. W.; Landen, O. L.; Wan, A.; Hsing, W.

    2015-12-04

    In FY15, LLNL’s High-Energy-Density Physics (HED) and Indirect Drive Inertial Confinement Fusion (ICF-ID) programs conducted several campaigns on the OMEGA laser system and on the EP laser system, as well as campaigns that used the OMEGA and EP beams jointly. Overall these LLNL programs led 468 target shots in FY15, with 315 shots using just the OMEGA laser system, 145 shots using just the EP laser system, and 8 Joint shots using Omega and EP together. Approximately 25% of the total number of shots (56 OMEGA shots and 67 EP shots, including the 8 Joint shots) supported the Indirect Drive Inertial Confinement Fusion Campaign (ICF-ID). The remaining 75% (267 OMEGA shots and 86 EP shots) were dedicated to experiments for High-Energy-Density Physics (HED). Highlights of the various HED and ICF campaigns are summarized in the following reports.

  7. FY14 LLNL OMEGA Experimental Programs

    SciTech Connect

    Heeter, R. F.; Fournier, K. B.; Baker, K.; Barrios, M.; Bernstein, L.; Brown, G.; Celliers, P.; Chen, H.; Coppari, F.; Fratanduono, D.; Johnson, M. G.; Huntington, C.; Jenei, A.; Kraus, R.; Ma, T.; Martinez, D.; McNabb, D.; Millot, M.; Moore, A.; Nagel, S.; Park, H. S.; Patel, P.; Perez, F.; Ping, Y.; Pollock, B.; Ross, J. S.; Rygg, J. R.; Smith, R.; Zylstra, A.; Collins, G.; Landen, O.; Wan, A.; Hsing, W.

    2014-10-13

    In FY14, LLNL’s High-Energy-Density Physics (HED) and Indirect Drive Inertial Confinement Fusion (ICF-ID) programs conducted several campaigns on the OMEGA laser system and on the EP laser system, as well as campaigns that used the OMEGA and EP beams jointly. Overall these LLNL programs led 324 target shots in FY14, with 246 shots using just the OMEGA laser system, 62 shots using just the EP laser system, and 16 Joint shots using Omega and EP together. Approximately 31% of the total number of shots (62 OMEGA shots, 42 EP shots) shots supported the Indirect Drive Inertial Confinement Fusion Campaign (ICF-ID). The remaining 69% (200 OMEGA shots and 36 EP shots, including the 16 Joint shots) were dedicated to experiments for High- Energy-Density Physics (HED). Highlights of the various HED and ICF campaigns are summarized in the following reports.

  8. Groundwater level status report for 2009, Los Alamos National Laboratory

    SciTech Connect

    Koch, Richard J.; Schmeer, Sarah

    2010-03-01

    The status of groundwater level monitoring at Los Alamos National Laboratory in 2009 is provided in this report. This report summarizes groundwater level data for 179 monitoring wells, including 55 regional aquifer wells (including 11 regional/intermediate wells), 26 intermediate wells, 98 alluvial wells, and 12 water supply wells. Pressure transducers were installed in 161 monitoring wells for continuous monitoring of groundwater levels. Time-series hydrographs of groundwater level data are presented along with pertinent construction and location information for each well. The report also summarizes the groundwater temperatures recorded in intermediate and regional aquifer monitoring wells.

  9. Los Alamos National Laboratory Economic Analysis Capability Overview

    SciTech Connect

    Boero, Riccardo; Edwards, Brian Keith; Pasqualini, Donatella; Rivera, Michael Kelly

    2016-04-19

    Los Alamos National Laboratory has developed two types of models to compute the economic impact of infrastructure disruptions. FastEcon is a fast running model that estimates first-­order economic impacts of large scale events such as hurricanes and floods and can be used to identify the amount of economic activity that occurs in a specific area. LANL’s Computable General Equilibrium (CGE) model estimates more comprehensive static and dynamic economic impacts of a broader array of events and captures the interactions between sectors and industries when estimating economic impacts.

  10. Groundwater level status report for 2010, Los Alamos National Laboratory

    SciTech Connect

    Koch, Richard J.; Schmeer, Sarah

    2011-03-01

    The status of groundwater level monitoring at Los Alamos National Laboratory in 2010 is provided in this report. This report summarizes groundwater level data for 194 monitoring wells, including 63 regional aquifer wells (including 10 regional/intermediate wells), 34 intermediate wells, 97 alluvial wells, and 12 water supply wells. Pressure transducers were installed in 162 monitoring wells for continuous monitoring of groundwater levels. Time-series hydrographs of groundwater level data are presented along with pertinent construction and location information for each well. The report also summarizes the groundwater temperatures recorded in intermediate and regional aquifer monitoring wells and seasonal responses to snowmelt runoff observed in intermediate wells.

  11. Recent developments in the Los Alamos radiation transport code system

    SciTech Connect

    Forster, R.A.; Parsons, K.

    1997-06-01

    A brief progress report on updates to the Los Alamos Radiation Transport Code System (LARTCS) for solving criticality and fixed-source problems is provided. LARTCS integrates the Diffusion Accelerated Neutral Transport (DANT) discrete ordinates codes with the Monte Carlo N-Particle (MCNP) code. The LARCTS code is being developed with a graphical user interface for problem setup and analysis. Progress in the DANT system for criticality applications include a two-dimensional module which can be linked to a mesh-generation code and a faster iteration scheme. Updates to MCNP Version 4A allow statistical checks of calculated Monte Carlo results.

  12. Groundwater level status report for 2008, Los Alamos National Laboratory

    SciTech Connect

    Koch, Richard J.; Schmeer, Sarah

    2009-03-01

    The status of groundwater level monitoring at Los Alamos National Laboratory in 2008 is provided in this report. This report summarizes groundwater level data for 179 monitoring wells, including 45 regional aquifer wells, 28 intermediate wells, 8 regional/intermediate wells, 106 alluvial wells, and 12 water supply wells. Pressure transducers were installed in 166 monitoring wells for continuous monitoring of groundwater levels. Time-series hydrographs of groundwater level data are presented along with pertinent construction and location information for each well. The report also summarizes the groundwater temperatures recorded in intermediate and regional aquifer monitoring wells.

  13. Groundwater Level Status Report for 2005 Los Alamos National Laboratory

    SciTech Connect

    S.P. Allen; R.J. Koch

    2006-05-15

    The status of groundwater level monitoring at Los Alamos National Laboratory (LANL) in 2005 is provided in this report. The Groundwater Level Monitoring Project was instituted in 2005 to provide a framework for the collection and processing of quality controlled groundwater level data. This report summarizes groundwater level data for 137 monitoring wells, including 41 regional aquifer wells, 22 intermediate wells, and 74 alluvial wells. Pressure transducers were installed in 118 monitoring wells for continuous monitoring of groundwater levels. Time-series hydrographs of groundwater level data are presented along with pertinent construction and location information for each well.

  14. The Los Alamos National Laboratory Nuclear Vision Project

    SciTech Connect

    Arthur, E.D.; Wagner, R.L. Jr.

    1996-09-01

    Los Alamos National Laboratory has initiated a project to examine possible futures associated with the global nuclear enterprise over the course of the next 50 years. All major components are included in this study--weapons, nonproliferation, nuclear power, nuclear materials, and institutional and public factors. To examine key issues, the project has been organized around three main activity areas--workshops, research and analyses, and development of linkages with other synergistic world efforts. This paper describes the effort--its current and planned activities--as well as provides discussion of project perspectives on nuclear weapons, nonproliferation, nuclear energy, and nuclear materials focus areas.

  15. Los Alamos Science, Number 25 -- 1997: Celebrating the Neutrino

    DOE R&D Accomplishments Database

    Cooper, N. G. ed.

    1997-01-01

    This issue is devoted to the neutrino and its remaining mysteries. It is divided into the following areas: (1) The Reines-Cowan experiment -- detecting the poltergeist; (2) The oscillating neutrino -- an introduction to neutrino masses and mixing; (3) A brief history of neutrino experiments at LAMPF; (4) A thousand eyes -- the story of LSND (Los Alamos neutrino oscillation experiment); (5) The evidence for oscillations; (6) The nature of neutrinos in muon decay and physics beyond the Standard Model; (7) Exorcising ghosts -- in pursuit of the missing solar neutrinos; (8) MSW -- a possible solution to the solar neutrino problem; (8) Neutrinos and supernovae; and (9) Dark matter and massive neutrinos.

  16. Mac configuration management at the Los Alamos National Laboratory

    SciTech Connect

    Marcus, Allan B

    2010-01-01

    The Los Alamos National Laboratory (LANL) had a need for central configuration management of non-Windows computers. LANL has three to five thousand Macs and an equal number of Linux based systems. The primary goal was to be able to inventory all non-windows systems and patch Mc OS X systems. LANL examined a number of commercial and open source solutions and ultimately selected Puppet. This paper will discuss why we chose Puppet, how we implemented it, and some lessons we learned along the way.

  17. Los Alamos Science, Number 25 -- 1997: Celebrating the neutrino

    SciTech Connect

    Cooper, N.G.

    1997-12-31

    This issue is devoted to the neutrino and its remaining mysteries. It is divided into the following areas: (1) The Reines-Cowan experiment -- detecting the poltergeist; (2) The oscillating neutrino -- an introduction to neutrino masses and mixing; (3) A brief history of neutrino experiments at LAMPF; (4) A thousand eyes -- the story of LSND (Los Alamos neutrino oscillation experiment); (5) The evidence for oscillations; (6) The nature of neutrinos in muon decay and physics beyond the Standard Model; (7) Exorcising ghosts -- in pursuit of the missing solar neutrinos; (8) MSW -- a possible solution to the solar neutrino problem; (8) Neutrinos and supernovae; and (9) Dark matter and massive neutrinos.

  18. Water supply at Los Alamos during 1995. Progress report

    SciTech Connect

    McLin, S.G.; Purtymun, W.D.; Maes, M.N.

    1997-04-01

    Production of potable municipal water supplies during 1995 totaled about 1,356.1 million gallons from wells in the Guaje and Pajarito well fields. Wells in the Otowi field were not operational during 1995. The nonpotable water supply for industrial use was about 1.6 million gallons from the spring gallery in Water Canyon, and another 1.6 million gallons from Los Alamos Reservoir was used for lawn irrigation. There was no water used from Guaje Reservoir in 1995. The total water usage in 1995 was about 1,359.3 million gallons. Groundwater pumpage during 1995 was the lowest on record since 1966.

  19. Water supply at Los Alamos during 1985: Progress report

    SciTech Connect

    Purtymun, W.D.; Becker, N.M.; Maes, M.N.

    1986-10-01

    Well field operations during 1985 were satisfactory with municipal and industrial supplies consisting of 1587 x 10/sup 6/ gal from wells in three well fields and 37 x 10/sup 6/ gal from the gallery in Water Canyon. About 2.8 x 10/sup 6/ gal of water from Guaje Reservoir and 0.9 x 10/sup 6/ gal from Los Alamos Reservoir were used for irrigation; thus the total water usage in 1985 was about 1628 x 10/sup 6/ gal. Primary and secondary chemical quality of water in the distribution system is in compliance with federal regulations.

  20. Implementation of electronic chain-of-custody, analysis requests, and data verification at Los Alamos National Laboratory

    SciTech Connect

    Pound, H.C.; Miglio, J.J.

    1994-09-01

    To improve the efficiency of the entire environmental data collection process from sample collection to reporting to the client, Los Alamos National Laboratory is developing an automated system to carry out as much of the process as possible. The system uses {open_quotes}off-the-shelf{close_quotes} software. Our program anticipates a drastic reduction of the amount of paper generated throughout the process. The electronic system includes spreadsheets used for field and laboratory chains-of-custody. In addition, the system is used to order analyses and to verify data for compliance.

  1. An Evaluation of the LOS Alamos Precision Automated Turning System (pats) as a Production Tool for Atlas Liners

    NASA Astrophysics Data System (ADS)

    Anderson, W.; Day, R.; Hatch, D.; Gore, R.; Machen, D.; Bartos, J.; Salazar, M.; Hannah, P.

    2004-11-01

    The PATS is proposed as a possible means for efficient production of precision liners for Atlas [1]. The Los Alamos National Laboratory's High Energy Density Physics (HEDP) program supported an evaluation of this prospect over the last two years. The machine operations have been carefully mapped out, the status of the controllers and on-machine gauging evaluated, and dynamic error addressed. The PATS has been used to generate diamond turned liners with dimensions similar to those proposed for Atlas. In the mean time, Atlas liner criteria have become even more stringent. This paper will evaluate the known status of the PATS in view of current liner designs for Atlas.

  2. International Classification of Functioning, Disability and Health (ICF) Core Set for patients with vertigo, dizziness and balance disorders.

    PubMed

    Grill, Eva; Bronstein, Adolfo; Furman, Joseph; Zee, David S; Müller, Martin

    2012-01-01

    Vertigo, dizziness and balance disorders have major impact on independence, employability, activities and participation. There are many measures for the assessment of the impact of vertigo, but no consensus exists on which aspects should be measured. The objective of this study was to develop international standards (ICF Core Sets) for patients with vertigo and dizziness to describe functioning. The development of the ICF Core Sets involved a formal decision-making and consensus process, integrating evidence from preparatory studies including qualitative interviews with patients, a systematic review of the literature, a survey with health professionals, and empirical data collection from patients. Twenty-seven experts selected 100 second level categories for the comprehensive Core Set and 29 second level categories for the Brief Core Set. The largest number of categories was selected from the ICF component Activities and Participation (40). Twenty-five categories were selected from the component Body Functions, six from Body Structures, and 29 from Environmental Factors. The ICF Core Set for vertigo is designed for physicians, nurses, therapists and other health professionals working in inpatient or ambulatory settings. ICF Core Sets create patient-relevant outcomes that can be used as evidence for the success of treatments.

  3. Surface Modification of ICF Target Capsules by Pulsed Laser Ablation

    SciTech Connect

    Carlson, Lane C.; Johnson, Michael A.; Bunn, Thomas L.

    2016-06-30

    Topographical modifications of spherical surfaces are imprinted on National Ignition Facility (NIF) target capsules by extending the capabilities of a recently developed full surface (4π) laser ablation and mapping apparatus. The laser ablation method combines the precision, energy density and long reach of a focused laser beam to pre-impose sinusoidal modulations on the outside surface of High Density Carbon (HDC) capsules and the inside surface of Glow Discharge Polymer (GDP) capsules. Sinusoidal modulations described in this paper have sub-micron to 10’s of microns vertical scale and wavelengths as small as 30 μm and as large as 200 μm. The modulated patterns are created by rastering a focused laser fired at discrete capsule surface locations for a specified number of pulses. The computer program developed to create these raster patterns uses inputs such as laser beam intensity profile, the material removal function, the starting surface figure and the desired surface figure. The patterns are optimized to minimize surface roughness. Lastly, in this paper, simulated surfaces are compared with actual ablated surfaces measured using confocal microscopy.

  4. Surface Modification of ICF Target Capsules by Pulsed Laser Ablation

    DOE PAGES

    Carlson, Lane C.; Johnson, Michael A.; Bunn, Thomas L.

    2016-06-30

    Topographical modifications of spherical surfaces are imprinted on National Ignition Facility (NIF) target capsules by extending the capabilities of a recently developed full surface (4π) laser ablation and mapping apparatus. The laser ablation method combines the precision, energy density and long reach of a focused laser beam to pre-impose sinusoidal modulations on the outside surface of High Density Carbon (HDC) capsules and the inside surface of Glow Discharge Polymer (GDP) capsules. Sinusoidal modulations described in this paper have sub-micron to 10’s of microns vertical scale and wavelengths as small as 30 μm and as large as 200 μm. The modulatedmore » patterns are created by rastering a focused laser fired at discrete capsule surface locations for a specified number of pulses. The computer program developed to create these raster patterns uses inputs such as laser beam intensity profile, the material removal function, the starting surface figure and the desired surface figure. The patterns are optimized to minimize surface roughness. Lastly, in this paper, simulated surfaces are compared with actual ablated surfaces measured using confocal microscopy.« less

  5. Selective demethylation and altered gene expression are associated with ICF syndrome in human-induced pluripotent stem cells and mesenchymal stem cells

    PubMed Central

    Huang, Kevin; Wu, Zhourui; Liu, Zhenshan; Hu, Ganlu; Yu, Juehua; Chang, Kai H.; Kim, Kee-Pyo; Le, Thuc; Faull, Kym F.; Rao, Nagesh; Gennery, Andrew; Xue, Zhigang; Wang, Cun-yu; Pellegrini, Matteo; Fan, Guoping

    2014-01-01

    Immunodeficiency, centromeric instability and facial anomalies type I (ICF1) syndrome is a rare genetic disease caused by mutations in DNA methyltransferase (DNMT) 3B, a de novo DNA methyltransferase. However, the molecular basis of how DNMT3B deficiency leads to ICF1 pathogenesis is unclear. Induced pluripotent stem cell (iPSC) technology facilitates the study of early human developmental diseases via facile in vitro paradigms. Here, we generate iPSCs from ICF Type 1 syndrome patient fibroblasts followed by directed differentiation of ICF1-iPSCs to mesenchymal stem cells (MSCs). By performing genome-scale bisulfite sequencing, we find that DNMT3B-deficient iPSCs exhibit global loss of non-CG methylation and select CG hypomethylation at gene promoters and enhancers. Further unbiased scanning of ICF1-iPSC methylomes also identifies large megabase regions of CG hypomethylation typically localized in centromeric and subtelomeric regions. RNA sequencing of ICF1 and control iPSCs reveals abnormal gene expression in ICF1-iPSCs relevant to ICF syndrome phenotypes, some directly associated with promoter or enhancer hypomethylation. Upon differentiation of ICF1 iPSCs to MSCs, we find virtually all CG hypomethylated regions remained hypomethylated when compared with either wild-type iPSC-derived MSCs or primary bone-marrow MSCs. Collectively, our results show specific methylome and transcriptome defects in both ICF1-iPSCs and differentiated somatic cell lineages, providing a valuable stem cell system for further in vitro study of the molecular pathogenesis of ICF1 syndrome. GEO accession number: GSE46030. PMID:25027325

  6. Upgrade and Certification of the Los Alamos National Laboratory SHENC 2011 - 12270

    SciTech Connect

    Stanfield, S.B.; Villani, M.; Barton, P.T.; Gerlock, C.; Nakazawa, D.; Baumann, R.C.; Mowry, R.; Harvill, J.P.

    2012-07-01

    more flexibility if replacement is required. The addition of the density based calibration on the gamma modality of the system increases the effectiveness of the SHENC for high alpha-n producing waste. Upgrading the system to new software also helped to standardize the program at Los Alamos. Only one new procedure was initiated for the integration of the SHENC. Add-A-Source measurements were effectively integrated with the system based on the confirmation results and positive results during two Department of Energy Performance Demonstration Program Box Cycles. Total measurement uncertainty estimates were completed for both the gamma modality and the neutron modality of the system. The SHENC was reviewed by both the Department of Energy and the Environmental Protection Agency in 2011. The certification letter for the SHENC was issued on November 16, 2011. With the certification letter issued to the Central Characterization Project the SHENC can perform waste measurements on SWB's at Los Alamos for shipment to WIPP. (authors)

  7. Addressing concerns related to geologic hazards at the site of the proposed Transuranic Waste Facility , TA-63, Los Alamos National Laboratory: focus on the current Los Alamos Seismic Network earthquake catalog, proximity of identified seismic events to the proposed facility , and evaluation of prev

    SciTech Connect

    Roberts, Peter M.; Schultz-Fellenz, Emily S.; Kelley, Richard E.

    2012-04-02

    . Understanding the subtle differences between Tshirege Member cooling units and the nature of the contacts between cooling units is critical to identifying the presence or absence of faults associated with the Pajarito fault system on the Pajarito Plateau. The Los Alamos Seismic Network (LASN) continuously monitors local earthquake activity in the Los Alamos area in support of LANL's Seismic Hazards program. Seismic monitoring of LANL facilities is a requirement of DOE Order 420.1B (Facility Safety). LASN currently consists of nine permanent seismic instrument field stations that telemeter real-time sensitive ground motion data to a central recording facility. Four of these stations are located on LANL property, with three of those within 2.5 miles of TA-63. The other five stations are in remote locations in the Jemez Mountains, Valles Caldera, St Peters Dome, and the Caja del Rio plateau across the Rio Grande from the Los Alamos area. Local earthquakes are defined as those with locations within roughly 100 miles of Los Alamos. Plate 1 shows the current LASN station locations and all local earthquakes recorded from 1973 through 2011. During this time period, LASN has detected and recorded over 850 local earthquakes in north-central New Mexico. Over 650 of these were located within about 50 miles of Los Alamos, and roughly 60 were within 10 miles. The apparent higher density of earthquakes close to Los Alamos, relative to the rest of north-central New Mexico, is due largely to the fact that LASN is a sensitive local seismic network, recording many very small nearby events (magnitude less than 1.0) that are undetectable at greater distances.

  8. Damage behavior of Nd:glass of high-power disk amplifier medium in ICF Facility

    NASA Astrophysics Data System (ADS)

    He, Shaobo; Chen, Lin; Yuan, Xiaodong; Chen, Yuanbin; Cheng, Xiaofeng; Xie, Xudong; Wang, Wenyi; Zu, Xiaotao

    2016-12-01

    Large aperture Nd:glass disk is often used as the amplifier medium in the inertial confinement fusion (ICF) facilities. The typical size of Nd:glass is up to 810mm×460mm×40mm and more than 3,000 Nd:glass components are needed in the ICF facility. At present, the 3ω fused silica glass and DKDP crystal are mainly responsible for the damage of driver used for ICF. However, with the enlargement of the facility and increase of laser shot number, the laser damage of Nd:glass at 1ω waveband is still an important problem to limit the stable operation of facility and improvement of laser beam quality. In this work, the influence of Nd:glass material itself, mechanical processing, service environment, and laser beam quality on its damage behavior is investigated experimentally and theoretically. The results and conclusions can be summarized as follows: (1) It is very important to control the concentration of platinum impurity particles during melting and the sputtering effect of the cladding materials. (2) The number and length of fractural and brittle scratches should be strictly suppressed during mechanical processing of Nd:glass. (3) The B-integral of high power laser beam should be rigorously controlled. Particularly, the top shape of pulses must be well controlled when operating at high peak laser power. (4) The service environment should be well managed to make sure the cleanness of the surface of Nd:glass better than 100/A level during mounting and running. (5) The service environment and beam quality should be monitored during operation.

  9. Effects of inhomogeneity at stagnation in 3D simulations of ICF implosions

    NASA Astrophysics Data System (ADS)

    Appelbe, Brian

    2016-10-01

    The stagnation phase of an ICF implosion is characterized by a hotspot and dense fuel layer that are spatially and temporally inhomogeneous. Perturbation growth during the implosion results in significant asymmetry at stagnation while the hotspot size, density and temperature change rapidly, even in non-igniting capsules. Diagnosing these inhomogeneities is necessary to increase yield in ICF experiments. In this work, 3D radiation hydrodynamic simulations of perturbed indirect drive ICF capsules are carried out using the CHIMERA code. During the stagnation phase a suite of novel and computationally efficient simulation tools are used to produce synthetic time-resolved neutron spectra and images. These tools allow a detailed study of the effects of hotspot inhomogeneities on diagnostic signals. Results show that the burn-averaged ion temperature drops rapidly during thermonuclear burn as the hotspot evolves from a localised, shock-heated region to a more massive, non-uniform plasma. Primary DD and DT neutron spectra show that there is significant residual bulk fluid motion at stagnation, complicating the measurement of ion temperature. Different perturbation modes cause different levels of anisotropic spectra shifts and broadening. However, in all cases the discrepancies between the DD and DT spectra are a reliable indicator of residual motion at stagnation. The simulations are used to examine the relationship between neutron scattering and areal density (ρR). Three measures of areal density are simulated: downscattered neutron ratio, attenuated primary neutron yield and nT backscatter edge. Each of these diagnoses the magnitude and anisotropy of the ρR with varying success, with accuracy decreasing for higher mode perturbations. Contributions to the neutron energy spectra from T +T reactions, secondary DT reactions and deuteron break-up are also evaluated.

  10. Possibilities and Implications of Using the ICF and Other Vocabulary Standards in Electronic Health Records.

    PubMed

    Vreeman, Daniel J; Richoz, Christophe

    2015-12-01

    There is now widespread recognition of the powerful potential of electronic health record (EHR) systems to improve the health-care delivery system. The benefits of EHRs grow even larger when the health data within their purview are seamlessly shared, aggregated and processed across different providers, settings and institutions. Yet, the plethora of idiosyncratic conventions for identifying the same clinical content in different information systems is a fundamental barrier to fully leveraging the potential of EHRs. Only by adopting vocabulary standards that provide the lingua franca across these local dialects can computers efficiently move, aggregate and use health data for decision support, outcomes management, quality reporting, research and many other purposes. In this regard, the International Classification of Functioning, Disability, and Health (ICF) is an important standard for physiotherapists because it provides a framework and standard language for describing health and health-related states. However, physiotherapists and other health-care professionals capture a wide range of data such as patient histories, clinical findings, tests and measurements, procedures, and so on, for which other vocabulary standards such as Logical Observation Identifiers Names and Codes and Systematized Nomenclature Of Medicine Clinical Terms are crucial for interoperable communication between different electronic systems. In this paper, we describe how the ICF and other internationally accepted vocabulary standards could advance physiotherapy practise and research by enabling data sharing and reuse by EHRs. We highlight how these different vocabulary standards fit together within a comprehensive record system, and how EHRs can make use of them, with a particular focus on enhancing decision-making. By incorporating the ICF and other internationally accepted vocabulary standards into our clinical information systems, physiotherapists will be able to leverage the potent

  11. Industrial application for the Los Alamos Materials Modeling Platform

    SciTech Connect

    Lesar, R.; Charbon, C.; Kothe, D.; Wu, D.; Reddy, A.

    1996-09-01

    This is the final report of a one-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). Casting and solidification of molten metals and metal alloys is a critical step in the production of high-quality metal stock and in the fabrication of finished parts. Control of the casting process can be the determining factor in both the quality and cost of the final metal product. Major problems with the quality of cast stock or finished parts can arise because of the difficulty of preventing variations in the alloy content, the generation of porosity or poor surface finish, and the loss of microstructure controlled strength and toughness resulting from the poor understanding and design of the mold filling and solidification processes. In this project, we sought to develop a new set of applications focused on adding the ability to accurately model solidification and grain growth to casting simulations. We implemented these applications within the Los Alamos Materials Modeling Platform, LAMMP, a graphical-based materials, and materials modeling environment being created at the Computational Testbed for Industry.

  12. Exploding metallic foil fuse modeling at Los Alamos

    SciTech Connect

    Lindemuth, I.R.; Reinovsky, R.E.; Goforth, J.H.

    1989-01-01

    A ''first-principles'' computational model of exploding metallic foil behavior has been developed at Los Alamos. The model couples zero-dimensional magnetohydrodynamics with ohmic heating and electrical circuit equations and uses the Los Alamos SESAME atomic data base computer library to determine the foil material's temperature- and density-dependent pressure, specific energy, and electrical conductivity. The model encompasses many previously successful empirical models and offers plausible physical explanations of phenomena not treated by the empirical models. In addition to addressing the electrical circuit performance of an exploding foil, the model provides information on the temporal evolution of the foil material's density, temperature, pressure, electrical conductivity, and expansion and translational velocities. In this paper, we report the physical insight gained by computational studies of two opening switch concepts being developed for application in an FCG-driven 1-MJ-class imploding plasma z-pinch experiment. The first concept considered is a ''conventional'' electrically exploded fuse, which has been demonstrated to operate at 16 MA driven by the 15-MJ-class FCG to be used in the 1 MJ implosion experiment. The second concept considered is a Type 2 explosively formed fuse (EFF), which has been demonstrated to operate at the 8 MA level by a 1-MJ-class FCG.

  13. An organizational survey of the Los Alamos Site

    SciTech Connect

    Shurberg, D.A.; Haber, S.B.

    1991-11-01

    An Organizational Survey (OS) was administered at the Los Alamos Site that queried employees on the subjects of organizational culture, various aspects of communications, employee commitment, work group cohesion, coordination of work, environmental, safety, and health concern, hazardous nature of work, safety and overall job satisfaction. The purpose of the OS is to measure in a quantitative and objective way the notion of culture;'' that is, the values, attitudes, and beliefs of the individuals working within the organization. In addition, through the OS, a broad sample of individuals can be reached that would probably not be interviewed or observed during the course of a typical assessment. The OS also provides a descriptive profile of the organization at one point in time that can then be compared to a profile taken at a different point in time to assess changes in the culture of the organization. While comparisons among groups are made, it is not the purpose of this report to make evaluative statements of which profile may be positive or negative. However, using the data presented in this report in conjunction with other evaluative activities, may provide useful insight into the organization. The OS administration at the Los Alamos Site was the ninth to occur at a Department of Energy (DOE) facility. All data from the OS is presented in group summaries, by organization, department or directorate within organization, supervisory level both overall and within organization, and staff classification within organization. Statistically significant differences between groups are identified and discussed. 9 refs., 94 figs., 11 tabs.

  14. An organizational survey of the Los Alamos Site

    SciTech Connect

    Shurberg, D.A.; Haber, S.B.

    1991-11-01

    An Organizational Survey (OS) was administered at the Los Alamos Site that queried employees on the subjects of organizational culture, various aspects of communications, employee commitment, work group cohesion, coordination of work, environmental, safety, and health concern, hazardous nature of work, safety and overall job satisfaction. The purpose of the OS is to measure in a quantitative and objective way the notion of ``culture;`` that is, the values, attitudes, and beliefs of the individuals working within the organization. In addition, through the OS, a broad sample of individuals can be reached that would probably not be interviewed or observed during the course of a typical assessment. The OS also provides a descriptive profile of the organization at one point in time that can then be compared to a profile taken at a different point in time to assess changes in the culture of the organization. While comparisons among groups are made, it is not the purpose of this report to make evaluative statements of which profile may be positive or negative. However, using the data presented in this report in conjunction with other evaluative activities, may provide useful insight into the organization. The OS administration at the Los Alamos Site was the ninth to occur at a Department of Energy (DOE) facility. All data from the OS is presented in group summaries, by organization, department or directorate within organization, supervisory level both overall and within organization, and staff classification within organization. Statistically significant differences between groups are identified and discussed. 9 refs., 94 figs., 11 tabs.

  15. Fuels Inventories in the Los Alamos National Laboratory Region: 1997

    SciTech Connect

    Balice, R.G.; Oswald, B.P.; Martin, C.

    1999-03-01

    Fifty-four sites were surveyed for fuel levels, vegetational structures, and topographic characteristics. Most of the surveyed sites were on Los Alamos National Laboratory property, however, some surveys were also conducted on U.S. Forest Service property. The overall vegetation of these sites ranged from pinon-juniper woodlands to ponderosa pine forests to mixed conifer forests, and the topographic positions included canyons, mesas, and mountains. The results of these surveys indicate that the understory fuels are the greatest in mixed conifer forests and that overstory fuels are greatest in both mixed conifer forests and ponderosa pine forests on mesas. The geographic distribution of these fuels would suggest a most credible wildfire scenario for the Los Alamos region. Three major fires have occurred since 1954 and these fires behaved in a manner that is consistent with this scenario. The most credible wildfire scenario was also supported by the results of BEHAVE modeling that used the fuels inventory data as inputs. Output from the BEHAVE model suggested that catastrophic wildfires would continue to occur during any season with sufficiently dry, windy weather.

  16. The Los Alamos suite of relativistic atomic physics codes

    DOE PAGES

    Fontes, C. J.; Zhang, H. L.; Jr, J. Abdallah; ...

    2015-05-28

    The Los Alamos SuitE of Relativistic (LASER) atomic physics codes is a robust, mature platform that has been used to model highly charged ions in a variety of ways. The suite includes capabilities for calculating data related to fundamental atomic structure, as well as the processes of photoexcitation, electron-impact excitation and ionization, photoionization and autoionization within a consistent framework. These data can be of a basic nature, such as cross sections and collision strengths, which are useful in making predictions that can be compared with experiments to test fundamental theories of highly charged ions, such as quantum electrodynamics. The suitemore » can also be used to generate detailed models of energy levels and rate coefficients, and to apply them in the collisional-radiative modeling of plasmas over a wide range of conditions. Such modeling is useful, for example, in the interpretation of spectra generated by a variety of plasmas. In this work, we provide a brief overview of the capabilities within the Los Alamos relativistic suite along with some examples of its application to the modeling of highly charged ions.« less

  17. The Los Alamos universe: Using multimedia to promote laboratory capabilities

    SciTech Connect

    Kindel, J.

    2000-03-01

    This project consists of a multimedia presentation that explains the technological capabilities of Los Alamos National Laboratory. It takes the form of a human-computer interface built around the metaphor of the universe. The project is intended promote Laboratory capabilities to a wide audience. Multimedia is simply a means of communicating information through a diverse set of tools--be they text, sound, animation, video, etc. Likewise, Los Alamos National Laboratory is a collection of diverse technologies, projects, and people. Given the ample material available at the Laboratory, there are tangible benefits to be gained by communicating across media. This paper consists of three parts. The first section provides some basic information about the Laboratory, its mission, and its needs. The second section introduces this multimedia presentation and the metaphor it is based on along with some basic concepts of color and user interaction used in the building of this project. The final section covers construction of the project, pitfalls, and future improvements.

  18. Investigation of excess thyroid cancer incidence in Los Alamos County

    SciTech Connect

    Athas, W.F.

    1996-04-01

    Los Alamos County (LAC) is home to the Los Alamos National Laboratory, a U.S. Department of Energy (DOE) nuclear research and design facility. In 1991, the DOE funded the New Mexico Department of Health to conduct a review of cancer incidence rates in LAC in response to citizen concerns over what was perceived as a large excess of brain tumors and a possible relationship to radiological contaminants from the Laboratory. The study found no unusual or alarming pattern in the incidence of brain cancer, however, a fourfold excess of thyroid cancer was observed during the late-1980`s. A rapid review of the medical records for cases diagnosed between 1986 and 1990 failed to demonstrate that the thyroid cancer excess had resulted from enhanced detection. Surveillance activities subsequently undertaken to monitor the trend revealed that the excess persisted into 1993. A feasibility assessment of further studies was made, and ultimately, an investigation was conducted to document the epidemiologic characteristics of the excess in detail and to explore possible causes through a case-series records review. Findings from the investigation are the subject of this report.

  19. The Los Alamos suite of relativistic atomic physics codes

    SciTech Connect

    Fontes, C. J.; Zhang, H. L.; Jr, J. Abdallah; Clark, R. E. H.; Kilcrease, D. P.; Colgan, J.; Cunningham, R. T.; Hakel, P.; Magee, N. H.; Sherrill, M. E.

    2015-05-28

    The Los Alamos SuitE of Relativistic (LASER) atomic physics codes is a robust, mature platform that has been used to model highly charged ions in a variety of ways. The suite includes capabilities for calculating data related to fundamental atomic structure, as well as the processes of photoexcitation, electron-impact excitation and ionization, photoionization and autoionization within a consistent framework. These data can be of a basic nature, such as cross sections and collision strengths, which are useful in making predictions that can be compared with experiments to test fundamental theories of highly charged ions, such as quantum electrodynamics. The suite can also be used to generate detailed models of energy levels and rate coefficients, and to apply them in the collisional-radiative modeling of plasmas over a wide range of conditions. Such modeling is useful, for example, in the interpretation of spectra generated by a variety of plasmas. In this work, we provide a brief overview of the capabilities within the Los Alamos relativistic suite along with some examples of its application to the modeling of highly charged ions.

  20. Water supply at Los Alamos during 1994. Progress report

    SciTech Connect

    McLin, S.G.; Purtymun, W.D.; Stoker, A.K.; Maes, M.N.

    1996-10-01

    Production of potable municipal water supplies during 1994 totaled about 1,426.6 million gallons of wells in the Guaje, Pajarito, and Otowi Fields. The non-potable water supply for industrial use was about 11.6 million gallons from the spring gallery in Water Canyon. There was no water used for irrigation from Guaje or Los Alamos Reservoirs; thus, the total water usage in 1994 was about 1,438.2 million gallons. Pumps in Guaje Well 5 and Otowi Well 4 failed during the year and were not operational by the end of 1994. Water production resumed in Pajarito Well 3 in June. Wells in the Los Alamos Field, on Pueblo Land, were plugged and abandoned in 1992, or were transferred to San Ildefonso Pueblo. This report fulfills requirements which require the Laboratory to monitor and document groundwater conditions below Pajarito Plateau, and to protect the main aquifer from contamination associated with Laboratory operations by providing information on hydrologic characteristics of the main aquifer, including operating conditions of the municipal water supply system.

  1. Capabilities for high explosive pulsed power research at Los Alamos National Laboratory

    SciTech Connect

    Goforth, James H; Oona, Henn; Tasker, Douglas G; Kaul, A M

    2008-01-01

    Research on topics requiring high magnetic fields and high currents have been pursued using high explosive pulsed power (HEPP) techniques since the 1950s at Los Alamos National Laboratory. We have developed many sophisticated HEPr systems through the years, and most of them depend on technology available from the nuclear weapons program. Through the 1980s and 1990s, our budgets would sustain parallel efforts in zpinch research using both HEPr and capacitor banks. In recent years, many changes have occurred that are driven by concerns such as safety, security, and environment, as well as reduced budgets and downsizing of the National Nuclear Security Administration (NNSA) complex due to the end of the cold war era. In this paper, we review the teclmiques developed to date, and adaptations that are driven by changes in budgets and our changing complex. One new Ranchero-based solid liner z-pinch experimental design is also presented. Explosives that are cast to shape instead of being machined, and initiation systems that depend on arrays of slapper detonators are important new tools. Some materials that are seen as hazardous to the environment are avoided in designs. The process continues to allow a wide range of research however, and there are few, if any, experiments that we have done in the past that could not be perform today. The HErr firing facility at Los Alamos continues to have a 2000 lb. high explosive limit, and our 2.4 MJ capacitor bank remains a mainstay of the effort. Modem diagnostic and data analysis capabilities allow fewer personnel to achieve better results, and in the broad sense we continue to have a robust capability.

  2. Ultrasonic vibration modal analysis of ICF targets using a photorefractive optical lock-in

    NASA Astrophysics Data System (ADS)

    Hale, Thomas C.; Asaki, Thomas J.; Telschow, Kenneth L.; Hoffer, Jim

    1998-03-01

    A photorefractive optical lock-in is discussed in relation to ultrasonic vibration modal analysis of inertial confinement fusion (ICF) targets. In this preliminary report, the method is used to analyze specimens with similar response characteristics to ICF targets with emphasis on both the displacement and frequency resolution of the technique. The experimental method, based on photorefractive frequency domain processing, utilizes a synchronous detection approach to measure phase variations in light scattered from optically rough, continuously vibrating surfaces with very high, linear sensitivity. In this photorefractive four-wave mixing technique, a small, point image of the object surface is made to interfere with a uniform, frequency modulated reference beam inside a Bismith Silicon Oxide crystal. Optical interference and the photorefractive effect of electronic charge redistribution leads to the formation of a refractive index grating in the medium that responds to the modulated beams at a frequency equal to the difference between the signal and reference frequencies. By retro-reflecting the reference beam back into the crystal, a diffracted beam, counter-propagating with respect to the original transmitted beam, is generated. Using a beamsplitter, the counter-propagating beam can be picked-off and deflected toward a photodetector. The intensity of this diffracted beam is shown to be a function of the first-order ordinary Bissel function, and therefore linearly dependent on the vibration displacement induced phase modulation depth (delta) , for small (delta) ((delta) < 4 (pi) (xi) /(lambda) < < 1) where (xi) is the vibration displacement and (lambda) is the source wavelength; analytical description and experimental verification of this linear response are given. The technique is applied to determine the modal characteristics of a rigidly clamped disc from 10 kHz to 100 kHz, a frequency range similar to that used to characterize ICF targets. The results

  3. Theory and simulations of neutralization and focusing of ICF ion beams

    SciTech Connect

    Lemons, D.S.; Jones, M.E.

    1985-10-01

    Inertial Confinement Fusion (ICF) ion beams must be focused to a small spot during final propagation to the target. In general, both beam emittance and space charge limit the achievable spot size. Here we consider the latter and how its effect can be eliminated by injecting into the target chamber electrons which are comoving and coexstensive with the ions. Unlike focusing an ion beam through a neutralizing plasma channel, the present propagation mode requires a hard vacuum (10/sup -4/ to 10/sup -5/ Torr) target chamber into which both ions and electrons are injected, and thus avoids possibly deleterious beam plasma interactions.

  4. A history of the working group to address Los Alamos community health concerns - A case study of community involvement and risk communication

    SciTech Connect

    Harry Otway; Jon Johnson

    2000-01-01

    In May 1991, at a Department of Energy (DOE) public hearing at Los Alamos, New Mexico, a local artist claimed there had been a recent brain tumor cluster in a small Los Alamos neighborhood. He suggested the cause was radiation from past operations of Los Alamos National Laboratory. Data from the Laboratory's extensive environmental monitoring program gave no reason to believe this charge to be true but also could not prove it false. These allegations, reported in the local and regional media, alarmed the community and revealed an unsuspected lack of trust in the Laboratory. Having no immediate and definitive response, the Laboratory offered to collaborate with the community to address this concern. The Los Alamos community accepted this offer and a joint Community-Laboratory Working Group met for the first time 29 days later. The working group set as its primary goal the search for possible carcinogens in the local environment. Meanwhile, the DOE announced its intention to fund the New Mexico Department of Health to perform a separate and independent epidemiological study of all Los Alamos cancer rates. In early 1994, after commissioning 17 environmental studies and meeting 34 times, the working group decided that the public health concerns had been resolved to the satisfaction of the community and voted to disband. This paper tells the story of the artist and the working group, and how the media covered their story. It summarizes the environmental studies directed by the working group and briefly reviews the main findings of the epidemiology study. An epilogue records the present-day recollections of some of the key players in this environmental drama.

  5. Documents and related materials associated with the contents and the origin of the Los Alamos technical series and the national nuclear energy series

    SciTech Connect

    Hammel, E.F.

    1996-04-01

    The rationale for preparing this document arose from the fact that the author (who worked in D-Building during WWII) was asked to contribute a short article on {open_quotes}Plutonium Metallurgy at Los Alamos During the War{close_quotes} for inclusion in the 50th anniversary book, {open_quotes}Behind Tall Fences,{close_quotes} published in 1993 by the J.R. Oppenheimer Memorial Committee. I agreed, believing that all of the source material needed was readily available in the Los Alamos Technical Series, a detailed account of all of the R&D carried out at Los Alamos from 1943 to 1945. The obvious place to start was the LANL Report Library. As will be seen by the perusing the following memoranda and reports (which were assembled one at a time by following up successive leads), it finally turned out that, of all six chapters of Vol. 10, {open_quotes}Metallurgy,{close_quotes} of which Cyril S. Smith was the general editor, the only one {open_quotes}not yet issued{close_quotes} was Chapter I on {open_quotes}Plutonium Metallurgy,{close_quotes} which had been assigned to Eric R. Jette, the wartime Group Leader of the Plutonium Metallurgy Group. Jette left Los Alamos at the end of August 1956 to join the Union Carbide Research Institute in Tarrytown, New York, where he was director until June 1962 when he retired to his valley home in Pojoaque. In February 1963, he was awarded the US Atomic Energy Commission citation for meritorious contributions to the Nuclear Energy Program; shortly thereafter he died. Before accepting the fact that Chapter I did not exist, the present author undertook to find out as much as possible about the Los Alamos Technical Series, including the circumstances relating to its preparation. The related memos, etc., once retrieved, seemed worth preserving in a single report-hence this document.

  6. Telomeres in ICF syndrome cells are vulnerable to DNA damage due to elevated DNA:RNA hybrids

    PubMed Central

    Sagie, Shira; Toubiana, Shir; Hartono, Stella R.; Katzir, Hagar; Tzur-Gilat, Aya; Havazelet, Shany; Francastel, Claire; Velasco, Guillaume; Chédin, Frédéric; Selig, Sara

    2017-01-01

    DNA:RNA hybrids, nucleic acid structures with diverse physiological functions, can disrupt genome integrity when dysregulated. Human telomeres were shown to form hybrids with the lncRNA TERRA, yet the formation and distribution of these hybrids among telomeres, their regulation and their cellular effects remain elusive. Here we predict and confirm in several human cell types that DNA:RNA hybrids form at many subtelomeric and telomeric regions. We demonstrate that ICF syndrome cells, which exhibit short telomeres and elevated TERRA levels, are enriched for hybrids at telomeric regions throughout the cell cycle. Telomeric hybrids are associated with high levels of DNA damage at chromosome ends in ICF cells, which are significantly reduced with overexpression of RNase H1. Our findings suggest that abnormally high TERRA levels in ICF syndrome lead to accumulation of telomeric hybrids that, in turn, can result in telomeric dysfunction. PMID:28117327

  7. A Method to Compare ICF and SNOMED CT for Coverage of U.S. Social Security Administration's Disability Listing Criteria.

    PubMed

    Tu, Samson W; Nyulas, Csongor I; Tudorache, Tania; Musen, Mark A

    2015-01-01

    We developed a method to evaluate the extent to which the International Classification of Function, Disability, and Health (ICF) and SNOMED CT cover concepts used in the disability listing criteria of the U.S. Social Security Administration's "Blue Book." First we decomposed the criteria into their constituent concepts and relationships. We defined different types of mappings and manually mapped the recognized concepts and relationships to either ICF or SNOMED CT. We defined various metrics for measuring the coverage of each terminology, taking into account the effects of inexact matches and frequency of occurrence. We validated our method by mapping the terms in the disability criteria of Adult Listings, Chapter 12 (Mental Disorders). SNOMED CT dominates ICF in almost all the metrics that we have computed. The method is applicable for determining any terminology's coverage of eligibility criteria.

  8. Recollections of a very junior physicist at Los Alamos, 1944-1946

    NASA Astrophysics Data System (ADS)

    French, Anthony P.

    2008-04-01

    The author came to Los Alamos as a member of the British Mission after two years of making fission cross section measurements at the Cavendish Laboratory. He worked in a group headed by Egon Bretscher in Enrico Fermi's F Division. The talk presents his personal memories and experiences at Los Alamos as compared to his life and work in wartime Britain.

  9. 75 FR 1793 - Study Team for the Los Alamos Historical Document Retrieval and Assessment (LAHDRA) Project

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-13

    ... HUMAN SERVICES Centers for Disease Control and Prevention Study Team for the Los Alamos Historical...: Public Meeting of the Study Team for the Los Alamos Historical Document Retrieval and Assessment Project...://www.ohkay.com/contactus.html . Status: Open to the public, limited only by the space available....

  10. Bulk processing of radionuclide generator parents at the Los Alamos Hot Cell Facility

    SciTech Connect

    Fassbender, M. E.; Nortier, F. M.; Phillips, Dennis R.; Peterson, E. J.

    2004-01-01

    Bulk radionuclide processing at Los Alamos includes isotopes with short-lived radioactive daughter nuclides ('generator parents') for medical applications. The generator radionuclide parents {sup 68}Ge, {sup 82}Sr, {sup 88}Zr and {sup 109}Cd are regularly processed at the Los Alamos Hot Cell Facility. Nuclear chemical aspects related to the production and processing of these generator parents are briefly outlined.

  11. 75 FR 72829 - Los Alamos Historical Document Retrieval and Assessment (LAHDRA) Project

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-26

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Los Alamos Historical Document Retrieval and... Los Alamos Historical Document Retrieval and Assessment (LAHDRA)Project. Time and Date: 5 p.m.-7...

  12. Application of the International Classification of Functioning, Disability and Health (ICF) to people with dysphagia following non-surgical head and neck cancer management.

    PubMed

    Nund, Rebecca L; Scarinci, Nerina A; Cartmill, Bena; Ward, Elizabeth C; Kuipers, Pim; Porceddu, Sandro V

    2014-12-01

    The International Classification of Functioning, Disability, and Health (ICF) is an internationally recognized framework which allows its user to describe the consequences of a health condition on an individual in the context of their environment. With growing recognition that dysphagia can have broad ranging physical and psychosocial impacts, the aim of this paper was to identify the ICF domains and categories that describe the full functional impact of dysphagia following non-surgical head and neck cancer (HNC) management, from the perspective of the person with dysphagia. A secondary analysis was conducted on previously published qualitative study data which explored the lived experiences of dysphagia of 24 individuals with self-reported swallowing difficulties following HNC management. Categories and sub-categories identified by the qualitative analysis were subsequently mapped to the ICF using the established linking rules to develop a set of ICF codes relevant to the impact of dysphagia following HNC management. The 69 categories and sub-categories that had emerged from the qualitative analysis were successfully linked to 52 ICF codes. The distribution of these codes across the ICF framework revealed that the components of Body Functions, Activities and Participation, and Environmental Factors were almost equally represented. The findings confirm that the ICF is a valuable framework for representing the complexity and multifaceted impact of dysphagia following HNC. This list of ICF codes, which reflect the diverse impact of dysphagia associated with HNC on the individual, can be used to guide more holistic assessment and management for this population.

  13. The Role of the WHO ICF as a Framework to Interpret Barriers and to Inclusion: Visually Impaired People's Views and Experiences of Personal Computers

    ERIC Educational Resources Information Center

    Douglas, Graeme; Corcoran, Christine; Pavey, Sue

    2007-01-01

    This article describes how the World Health Organisation's International Classification of Functioning, Disability, and Health (ICF), 2001, was used as a framework for the design of the interview schedule used in the Network 1000 project. It is argued that the ICF offers a vocabulary to enable visually impaired participants to describe their lives…

  14. The MentDis_ICF65+ study protocol: prevalence, 1-year incidence and symptom severity of mental disorders in the elderly and their relationship to impairment, functioning (ICF) and service utilisation

    PubMed Central

    2013-01-01

    Background The EU currently lacks reliable data on the prevalence and incidence of mental disorders in older people. Despite the availability of several national and international epidemiological studies, the size and burden of mental disorders in the elderly remain unclear due to various reasons. Therefore, the aims of the MentDis_ICF65+ study are (1) to adapt existing assessment instruments, and (2) to collect data on the prevalence, the incidence, and the natural course and prognosis of mental disorders in the elderly. Method/design Using a cross-sectional and prospective longitudinal design, this multi-centre study from six European countries and associated states (Germany, Great Britain, Israel, Italy, Spain, and Switzerland) is based on age-stratified, random samples of elderly people living in the community. The study program consists of three phases: (1) a methodological phase devoted primarily to the adaptation of age- and gender-specific assessment tools for older people (e.g., the Composite International Diagnostic Interview, CIDI) as well as psychometric evaluations including translation, back translation; (2) a baseline community study in all participating countries to assess the lifetime, 12 month and 1 month prevalence and comorbidity of mental disorders, including prior course, quality of life, health care utilization and helpseeking, impairments and participation and, (3) a 12 month follow-up of all baseline participants to monitor course and outcome as well as examine predictors. Discussion The study is an essential step forward towards the further development and improvement of harmonised instruments for the assessment of mental disorders as well as the evaluation of activity impairment and participation in older adults. This study will also facilitate the comparison of cross-cultural results. These results will have bearing on mental health care in the EU and will offer a starting point for necessary structural changes to be initiated for

  15. Dnmt3b Prefers Germ Line Genes and Centromeric Regions: Lessons from the ICF Syndrome and Cancer and Implications for Diseases

    PubMed Central

    Walton, Emma L.; Francastel, Claire; Velasco, Guillaume

    2014-01-01

    The correct establishment and maintenance of DNA methylation patterns are critical for mammalian development and the control of normal cell growth and differentiation. DNA methylation has profound effects on the mammalian genome, including transcriptional repression, modulation of chromatin structure, X chromosome inactivation, genomic imprinting, and the suppression of the detrimental effects of repetitive and parasitic DNA sequences on genome integrity. Consistent with its essential role in normal cells and predominance at repetitive genomic regions, aberrant changes of DNA methylation patterns are a common feature of diseases with chromosomal and genomic instabilities. In this context, the functions of DNA methyltransferases (DNMTs) can be affected by mutations or alterations of their expression. DNMT3B, which is involved in de novo methylation, is of particular interest not only because of its important role in development, but also because of its dysfunction in human diseases. Expression of catalytically inactive isoforms has been associated with cancer risk and germ line hypomorphic mutations with the ICF syndrome (Immunodeficiency Centromeric instability Facial anomalies). In these diseases, global genomic hypomethylation affects repeated sequences around centromeric regions, which make up large blocks of heterochromatin, and is associated with chromosome instability, impaired chromosome segregation and perturbed nuclear architecture. The review will focus on recent data about the function of DNMT3B, and the consequences of its deregulated activity on pathological DNA hypomethylation, including the illicit activation of germ line-specific genes and accumulation of transcripts originating from repeated satellite sequences, which may represent novel physiopathological biomarkers for human diseases. Notably, we focus on cancer and the ICF syndrome, pathological contexts in which hypomethylation has been extensively characterized. We also discuss the potential

  16. Progress in laboratory high gain ICF (inertial confinement fusion): Prospects for the future

    SciTech Connect

    Storm, E.; Lindl, J.D.; Campbell, E.M.; Bernat, T.P.; Coleman, L.W.; Emmett, J.L.; Hogan, W.J.; Hunt, J.T.; Krupke, W.F.; Lowdermilk, W.H.

    1988-01-01

    Inertial confinement fusion (ICF), a thermonuclear reaction in a small (/approximately/5 mm diameter) fuel capsule filled with a few milligrams of deuterium and tritium, has been the subject of very fruitful experimentation since the early 1970's. High gain ICF is now on the threshold of practical applications. With a Laboratory Microfusion Facility (LMF), these applications will have major implications for national defense, basic and applied science, and power production. With a driver capable of delivering about 10 MJ in a 10-ns pulse at an intensity of /approximately/3 /times/ 10/sup 14/ W/cm/sup 2/, an appropriately configured cryogenic capsule could be compressed to a density of about 200 g/cm/sup 3/ and a temperature of 3--5 keV. Under these conditions, up to 10 mg of DT could be ignited, and with a burn efficiency of about 30%, release up to 1000 MJ of fusion energy, an energy gain of about 100. A thousand megajoules is equivalent to about one quarter ton of TNT, or about 7 gallons of oil--an amount of energy tractable under laboratory conditions and potentially very useful for a variety of applications. 61 refs., 33 figs.

  17. ICF quarterly report October-December 1998 volume 8, number 1

    SciTech Connect

    Feit, M

    1998-09-08

    This issue of the ICF Quarterly Report focuses on the final section of the 192-arm, 1.8-MJ National Ignition Facility (NIF). We describe both technological advances necessary for optimal utilization of the delivered energy and the hohlraum physics resulting from extremely high energy densities. Two articles belong to the first category. The conversion of infrared light to ultraviolet occurs at the tripler in the NIF's Final Optics Assembly. It is then necessary to separate any unconverted (first- and second-harmonic) light from the tripled-frequency light passed to the target. Large-Aperture Color-Separation Gratings for Diverting Unconverted Light Away from the NIF Target describes the design and fabrication of novel diffraction gratings that fulfill this function. In both direct- and indirect-drive ICF, the symmetry of the capsule as it compresses is crucial. The NIF will have 48 clusters of four beams incident on targets. Optimization of Beam Angles for the National Ignition Facility (p. 15) presents the rationale used to assign beam angles for cylindrical indirect drive while still allowing direct-drive and tetrahedral indirect-drive experiments to be performed.

  18. Novel gas-dynamic levitation scheme for noncontact coating of spherical ICF targets

    SciTech Connect

    Kim, K.; Feng, Q.

    1995-12-01

    A novel gas-dynamic levitation technique has been developed to facilitate noncontact coating of spherical ICF targets. Using this technique three metal balls 450 {mu}m, 650 {mu}m and 950 {mu}m in diameter were levitated very stably for several hours, with the balls rotating continuously. Unlike the conventional gas-dynamic levitation scheme in which a single gas-emitting fixture, placed below an object, lifts it up and contains it in a confined volume, the present scheme relies on two fixtures, one placed under and the other above the object. The bottom fixture, as is with the conventional scheme, is a gas emitter; however, the top one is a gas collector shaping the flow field around the object so as to confine the object near the axis of symmetry of the levitation system. As a result, the present system exhibits excellent stability and robustness, and is immune to such external disturbances as nonuniform temperature fields and air currents, and small changes in the levitation gas pressure. The apparatus is inexpensive to fabricate and simple to operate. The details of the apparatus and the preliminary data demonstrating the capability of the levitation scheme are presented. A target coating method, compatible with the present target levitation scheme and suitable for uniform coating of ICF targets, is indicated. 6 refs., 5 figs.

  19. Demonstration of the use of the ICF framework in detailing complex functional deficits after major burn.

    PubMed

    Grisbrook, T L; Stearne, S M; Reid, S L; Wood, F M; Rea, S M; Elliott, C M

    2012-02-01

    Burns can result in long term impairments, activity limitations and participation restrictions in a patients' life. The focus of current surgeries and therapy is to improve body functions and structures. However, often this does not translate to an improvement in activity and participation for the patient. Improvement in activity and participation is the ultimate goal of all therapy to enhance patient's quality of life. The incorporation of assessment measures at all levels of the International Classification of Functioning, Disability and Health (ICF) can assist in a holistic, patient centred approach to identify the complex impairments that impact on activity and participation, with a view to appropriately targeting future therapeutic interventions. This paper presents an example case of how implementing measures at all levels of the ICF can improve our understanding of a patient's body functions and structures, activity and participation. A number of the outcome measures utilised in this study are novel in the burns population, such that video footage supplements the methodology where relevant.

  20. Implosion Dynamics and Mix in Double-Shell ICF Capsule Designs

    NASA Astrophysics Data System (ADS)

    Gunderson, Mark; Daughton, William; Simakov, Andrei; Wilson, Douglas; Watt, Robert; Delamater, Norman; Montgomery, David

    2015-11-01

    From an implosion dynamics perspective, double-shell ICF capsule designs have several advantages over the single-shell NIF ICF capsule point design. Double shell designs do not require precise shock sequencing, do not rely on hot spot ignition, have lower peak implosion speed requirements, and have lower convergence ratio requirements. However, there are still hurdles that must be overcome. The timing of the two main shocks in these designs is important in achieving sufficient compression of the DT fuel. Instability of the inner gold shell due to preheat from the hohlraum environment can disrupt the implosion of the inner pill. Mix, in addition to quenching burn in the DT fuel, also decreases the transfer of energy between the beryllium ablator and the inner gold shell during collision thus decreasing the implosion speed of the inner shell along with compression of the DT fuel. Herein, we will discuss practical implications of these effects on double-shell design we carry out in preparation for the NIF double-shell campaign. Work performed under the auspices of DOE by LANL under contract DE-AC52-06NA25396.

  1. X-ray Digital Radiography and Computed Tomography of ICF and HEDP Materials, Subassemblies and Targets

    SciTech Connect

    Brown, W D; Martz Jr., H E

    2006-05-31

    Inertial confinement fusion (ICF) and high energy density physics (HEDP) research are being conducted at large laser facilities, such as the University of Rochester's Laboratory for Laser Energetics OMEGA facility and the Lawrence Livermore National Laboratory's (LLNL) National Ignition Facility (NIF). At such facilities, millimeter-sized targets with micrometer structures are studied in a variety of hydrodynamic, radiation transport, equation-of-state, inertial confinement fusion and high-energy density experiments. The extreme temperatures and pressures achieved in these experiments make the results susceptible to imperfections in the fabricated targets. Targets include materials varying widely in composition ({approx}3 < Z < {approx}82), density ({approx}0.03 to {approx}20 g/cm{sup 3}), geometry (planar to spherical) and embedded structures (joints to subassemblies). Fabricating these targets with structures to the tolerances required is a challenging engineering problem the ICF and HEDP community are currently undertaking. Nondestructive characterization (NDC) provides a valuable tool in material selection, component inspection, and the final pre-shot assemblies inspection. X-rays are a key method used to NDC these targets. In this paper we discuss X-ray attenuation, X-ray phase effects, and the X-ray system used, its performance and application to characterize low-temperature Raleigh-Taylor and non-cryogenic double-shell targets.

  2. The Los Alamos Space Weather Summer School: Career and Research Benefits to Students and Mentors

    NASA Astrophysics Data System (ADS)

    Cowee, M.

    2014-12-01

    This last summer we held the 4th Los Alamos Space Weather Summer School. This 8-week long program is designed for mid-career graduate students in related fields to come to LANL, receive lectures on space physics and space environment topics, and carry out a research project under the mentorship of LANL staff members. On average we have accepted ~10 students per year to the program, with a strong applicant pool to choose from. This type of summer school program is relatively unique in the space physics community—there are several other summer schools but they are of shorter duration and do not include the mentor-research project aspect which builds a strong one-on-one connection between the summer student and his/her LANL mentor(s). From the LANL perspective, this program was intended to have several benefits including building collaborations between LANL staff and universities and recruitment of potential postdocs. From the student perspective, this program is not only an educational opportunity but a strong networking opportunity and a chance to enhance their professional skills and publication record. Students are permitted to work on projects directly related to their thesis or on projects in areas that are completely new to them. At the end of the summer school, the students also develop their presentation skills by preparing and giving 20 min presentations on their research projects to the research group. Over the past four years the summer school has increased in popularity, and the feedback from the student participants has been very positive. Alumni of the program have continued collaborations with their mentors, resulting in publications and conference presentations, and one postdoc hire to date.

  3. The Los Alamos Space Weather Summer School: Career and Research Benefits to Students and Mentors

    NASA Astrophysics Data System (ADS)

    Cowee, M.

    2015-12-01

    This last summer we held the 5th Los Alamos Space Weather Summer School. This 8-week long program is designed for mid-career graduate students in related fields to come to LANL, receive lectures on space physics and space environment topics, and carry out a research project under the mentorship of LANL staff members. We accept typically 6-8 students to the program, with a strong applicant pool to choose from. This type of summer school program is relatively unique in the space physics community—there are several other summer schools but they are of shorter duration and do not include the mentor-research project aspect which builds a strong one-on-one connection between the summer student and his/her LANL mentor(s). From the LANL perspective, this program was intended to have several benefits including building collaborations between LANL staff and universities and recruitment of potential postdocs. From the student perspective, this program is not only an educational opportunity but a strong networking opportunity and a chance to enhance their professional skills and publication record. Students are permitted to work on projects directly related to their thesis or on projects in areas that are completely new to them. At the end of the summer school, the students also develop their presentation skills by preparing and giving AGU-style presentations on their research projects to the research group. Over the past five years the summer school has increased in popularity, and the feedback from the student participants has been very positive. Alumni of the program have continued collaborations with their mentors, resulting in publications and conference presentations, and one postdoc hire to date.

  4. KrF amplifier design issues and application to ICF system design

    SciTech Connect

    Sullivan, J.A.; Allen, G.R.; Berggren, R.R.; Czuchlewski, S.J.; Harris, D.B.; Jones, M.E.; Krohn, B.J.; Kurnit, N.A.; Leland, W.T.; Mansfield, C.; McLeod, J.; McCown, A.W.; McLeod, J.; Pendergrass, J.H.; Rose, E.A.; Rosocha, L.A.; Thomas, V.A.

    1991-01-01

    Los Alamos National Laboratory has assembled an array of experimental and theoretical tools to optimize amplifier design for future KrF lasers. The next opportunity to exercise these tools is with the design of the second generation NIKE system under construction at the Naval Research Laboratory with the collaboration of Los Alamos National Laboratory. Major issues include laser physics (energy extraction in large modules with amplified spontaneous emission) and diode performance and efficiency. High efficiency and low cost are increasingly important for larger future KrF amplifiers. In this paper we present our approach to amplifier scaling and discuss the more important design considerations for large KrF amplifiers. We point out where improvements in the fundamental data base for KrF amplifiers could lead to increased confidence in performance predictions for large amplifiers, and we address the currently unresolved issues of anomalous absorption near line center and the possibility of diode instabilities for low impedance designs. Los Alamos has designed a 100-kJ KrF laser-fusion system for both direct- and indirect-drive target physics experiments using 60-kJ amplifier modules. The design of this system will be reviewed. 38 refs., 110 figs., 3 tabs.

  5. Common ground: An environmental ethic for Los Alamos National Laboratory

    SciTech Connect

    Menlove, F.L.

    1991-01-01

    Three predominant philosophies have characterized American business ethical thinking over the past several decades. The first phase is the ethics of self-interest'' which argues that maximizing self-interest coincidentally maximizes the common good. The second phase is legality ethics.'' Proponents argue that what is important is knowing the rules and following them scrupulously. The third phase might be called stake-holder ethics.'' A central tenant is that everyone affected by a decision has a moral hold on the decision maker. This paper will discuss one recent initiative of the Los Alamos National Laboratory to move beyond rules and regulations toward an environmental ethic that integrates the values of stakeholder ethics'' into the Laboratory's historical culture and value systems. These Common Ground Principles are described. 11 refs.

  6. The legacy and future of CFD at Los Alamos

    SciTech Connect

    Johnson, N.L.

    1996-06-01

    The early history is presented of the prolific development of CFD methods in the Fluid Dynamics Group (T-3) at Los Alamos National Laboratory in the years from 1958 to the late 1960`s. Many of the currently used numerical methods--PIC, MAC, vorticity-stream-function, ICE, ALE methods and the {kappa}-{var_epsilon} method for turbulence--originated during this time. The rest of the paper summarizes the current research in T-3 for CFD, turbulence and solids modeling. The research areas include reactive flows, multimaterial flows, multiphase flows and flows with spatial discontinuities. Also summarized are modern particle methods and techniques developed for large scale computing on massively parallel computing platforms and distributed processors.

  7. Los Alamos Guns Take Aim at Material's Mysteries

    SciTech Connect

    Byers, Mark; Moore, David; Dimarino, Steve

    2014-04-14

    Los Alamos National Laboratory scientists and technicians conduct thousands of experiments a year, delving into the fundamental nature of everything from supernovas to subatomic particles. One set of instruments used to better understand the fundamental nature of various materials are 10 scientific gun systems that fire various projectiles at high-tech targets to create enormous velocities, pressures, and temperatures - and using laser, x-ray, and other diagnostics - explore the very nature of metals and other materials. The hundreds of gun-based experiments conducted every year at the Laboratory require a highly-skilled staff of scientists and technicians, and has given rise to a special organization called the "gun working group" to foster open communications, cooperation, problem-solving, and a healthy safety culture.

  8. Environmental surveillance and compliance at Los Alamos during 1996

    SciTech Connect

    1997-09-01

    This report presents environmental data that characterize environmental performance and addresses compliance with environmental standards and requirements at Los Alamos National Laboratory (LANL or the Laboratory) during 1996. The Laboratory routinely monitors for radiation and for radioactive nonradioactive materials at Laboratory sites as well as in the surrounding region. LANL uses the monitoring results to determine compliance with appropriate standards and to identify potentially undesirable trends. Data were collected in 1996 to assess external penetrating radiation; quantities of airborne emissions; and concentrations of chemicals and radionuclides in ambient air, surface waters and groundwaters, the municipal water supply, soils and sediments, and foodstuffs. Using comparisons with standards and regulations, this report concludes that environmental effects from Laboratory operations are small and do not pose a demonstrable threat to the public, Laboratory employees, or the environment. Laboratory operations were in compliance with all major environmental regulations.

  9. Root lengths of plants on Los Alamos National Laboratory lands

    SciTech Connect

    Tierney, G.D.; Foxx, T.S.

    1987-01-01

    Maximum root lengths of 22 plant species occurring on Los Alamos National Laboratory lands were measured. An average of two longest roots from each species were dug up and their lengths, typical shapes, and qualitative morphologics were noted along with the overstory dimensions of the plant individual with which the roots were associated. Maximum root lengths were compared with overstory (height times width) dimensions. Among the life forms studied, the shrubs tend to show the longest roots in relation to overstory size. Forbs show the shortest roots in relation to overstory size. Measurements of tree roots suggest only that immature trees on the Pajarito Plateau may have root-length to overstory-size ratios near one. 30 refs., 14 figs., 2 tabs.

  10. Los Alamos Discovers Super Efficient Solar Using Perovskite Crystals

    ScienceCinema

    Mohite, Aditya; Nie, Wanyi

    2016-07-12

    State-of-the-art photovoltaics using high-purity, large-area, wafer-scale single-crystalline semiconductors grown by sophisticated, high temperature crystal-growth processes offer promising routes for developing low-cost, solar-based clean global energy solutions for the future. Solar cells composed of the recently discovered material organic-inorganic perovskites offer the efficiency of silicon, yet suffer from a variety of deficiencies limiting the commercial viability of perovskite photovoltaic technology. In research to appear in Science, Los Alamos National Laboratory researchers reveal a new solution-based hot-casting technique that eliminates these limitations, one that allows for the growth of high-quality, large-area, millimeter-scale perovskite crystals and demonstrates that highly efficient and reproducible solar cells with reduced trap assisted recombination can be realized.

  11. Los Alamos National Laboratory capability reviews - FY 2011 status

    SciTech Connect

    Springer, Everett P

    2011-01-12

    Capability reviews are the Los Alamos National Laboratory approach to assess the quality of its science, technology, and engineering (STE), and its integration across the Laboratory. There are seven capability reviews in FY 2011 reviews. The Weapons Science and Engineering review will be replaced by the National Nuclear Security Administration's Predictive Science Panel for 2011 . Beginning in 2011, third-year LORD projects will be reviewed by capability review committees rather than the first-year LORD projects that have been performed for the last three years. This change addresses concerns from committees about reviewing a project before it had made any substantive progress. The current schedule, and chairs for the 2011 capability reviews is presented. The three-year cycle (2011-2013) for capability reviews are presented for planning purposes.

  12. Plans for an Ultra Cold Neutron source at Los Alamos

    SciTech Connect

    Seestrom, S.J.; Bowles, T.J.; Hill, R.; Greene, G.L.

    1996-10-01

    Ultra Cold Neutrons (UCN) can be produced at spallation sources using a variety of techniques. To date the technique used has been to Bragg scatter and Doppler shift cold neutrons into UCN from a moving crystal. This is particularly applicable to short-pulse spallation sources. We are presently constructing a UCN source at LANSCE using this method. In addition, large gains in UCN density should be possible using cryogenic UCN sources. Research is under way at Gatchina to demonstrate technical feasibility of a frozen deuterium source. If successful, a source of this type could be implemented at future spallation source, such as the long pulse source being planned at Los Alamos, with a UCN density that may be two orders of magnitude higher than that presently available at reactors.

  13. Neutron Capture Experiments Using the DANCE Array at Los Alamos

    NASA Astrophysics Data System (ADS)

    Dashdorj, D.; Mitchell, G. E.; Baramsai, B.; Chyzh, A.; Walker, C.; Agvaanluvsan, U.; Becker, J. A.; Parker, W.; Sleaford, B.; Wu, C. Y.; Bredeweg, T. A.; Couture, A.; Haight, R. C.; Jandel, M.; Rundberg, R. S.; Ullmann, J. L.; Vieira, D. J.; Wouters, J. M.; Krtička, M.; Bečvář, F.

    2009-03-01

    The Detector for Advanced Neutron Capture Experiments (DANCE) is designed for neutron capture measurements on very small and/or radioactive targets. The DANCE array of 160 BaF2 scintillation detectors is located at the Lujan Center at the Los Alamos Neutron Science Center (LANSCE). Accurate measurements of neutron capture data are important for many current applications as well as for basic understanding of neutron capture. The gamma rays following neutron capture reactions have been studied by the time-of-flight technique using the DANCE array. The high granularity of the array allows measurements of the gamma-ray multiplicity. The gamma-ray multiplicities and energy spectra for different multiplicities can be measured and analyzed for spin and parity determination of the resolved resonances.

  14. HELIOS: applications at the Los Alamos National Laboratory

    SciTech Connect

    Perry, R.T.; Mosteller, R.D.; Chodak, Paul III; Charlton, W.; Adams, B.T.

    1997-10-01

    The Los Alamos National Laboratory (LANL) is involved in the analysis of many different types of nuclear systems. The nuclear systems that we have analyzed have included subcritical accelerator driven systems for the transmutation of waste, fusion systems, critical experiment systems, and space propulsion and power systems. We have also analyzed special purpose reactors such as the LANL Omega West reactor, production reactors, and conventional commercial light- and heavy-water reactors. Thus the systems that we analyze and the type of results desired, often vary considerably from those of a power company normally analyzing their PWR or BWR for fissile fuel burnup and production. The reactor geometries that we model are often quite complicated such as those of an RBMK or Savannah River Production Reactor. Rather than fissile fuel production and burnup, the goal of a calculation could be the production rate of some obscure isotope which has medical applications.

  15. Experiments on planar plasma flow switches at Los Alamos

    SciTech Connect

    Benage, J.F. Jr.; Wysocki, F.J.; Bowers, R.; Oona, H.

    1997-12-01

    The authors have performed a series of experiments on the Colt facility at Los Alamos to study the performance of plasma flow switches and to understand the important physics issues which affect that performance. These experiments were done in planar geometry on a small machine to allow for better diagnostic access and a higher repetition rate. The Colt facility is a capacitor bank which stores 300 kJ at maximum charge and produced a peak current of 1.1 MA in 2.0 microseconds for these experiments. The diagnostics used for these experiments included an array of b-dot probes, visible framing pictures, visible spectroscopy, and laser interferometry. Characteristics of the switch are determined from spatial and temporal profiles of the magnetic field and the spatial profile and temperature of the switch plasma. Here the authors present results from experiments for a variety of switch conditions.

  16. LANSCE (Los Alamos Neutron Scattering Center) target data collection system

    SciTech Connect

    Kernodle, A.K. )

    1988-01-01

    The Los Alamos Neutron Scattering Center (LANSCE) Target Data Collection System is the result of an effort to provide a base of information from which to draw conclusions on the performance and operational condition of the overall LANSCE target system. During the conceptualization of the system several purposes and goals were defined. A survey was made of custom as well as off the shelf hardware and software which was capable of meeting these goals. The first stage of this system was successfully implemented for the LANSCE run cycle 52. From the operational experience gained thus far with the LANSCE Target Data Collection System, it would appear as though this system will indeed meet all of the previously defined requirements that seem to develop after a new system is installed.

  17. Los Alamos Discovers Super Efficient Solar Using Perovskite Crystals

    SciTech Connect

    Mohite, Aditya; Nie, Wanyi

    2015-01-29

    State-of-the-art photovoltaics using high-purity, large-area, wafer-scale single-crystalline semiconductors grown by sophisticated, high temperature crystal-growth processes offer promising routes for developing low-cost, solar-based clean global energy solutions for the future. Solar cells composed of the recently discovered material organic-inorganic perovskites offer the efficiency of silicon, yet suffer from a variety of deficiencies limiting the commercial viability of perovskite photovoltaic technology. In research to appear in Science, Los Alamos National Laboratory researchers reveal a new solution-based hot-casting technique that eliminates these limitations, one that allows for the growth of high-quality, large-area, millimeter-scale perovskite crystals and demonstrates that highly efficient and reproducible solar cells with reduced trap assisted recombination can be realized.

  18. Los Alamos Guns Take Aim at Material's Mysteries

    ScienceCinema

    Byers, Mark; Moore, David; Dimarino, Steve

    2016-07-12

    Los Alamos National Laboratory scientists and technicians conduct thousands of experiments a year, delving into the fundamental nature of everything from supernovas to subatomic particles. One set of instruments used to better understand the fundamental nature of various materials are 10 scientific gun systems that fire various projectiles at high-tech targets to create enormous velocities, pressures, and temperatures - and using laser, x-ray, and other diagnostics - explore the very nature of metals and other materials. The hundreds of gun-based experiments conducted every year at the Laboratory require a highly-skilled staff of scientists and technicians, and has given rise to a special organization called the "gun working group" to foster open communications, cooperation, problem-solving, and a healthy safety culture.

  19. Initial performance of Los Alamos Advanced Free Electron Laser

    SciTech Connect

    Nguyen, D.C.; Austin, R.H.; Chan, K.C.D.

    1993-09-01

    The Los Alamos compact Advanced FEL has lased at 4.7 and 5.2 {mu}m with a 1-cm period wiggler and a high-brightness electron beam at 16.8 and 15.8 MeV, respectively. The measured electron beam normalized emittance is 1.7 {pi}{center_dot}mm{center_dot}mrad at a peak current of 100 A, corresponding to a beam brightness greater than 2 {times} 10{sup 12} A/m{sup 2}rad{sup 2}. Initial results indicate that the AFEL small signal gain is {approximately}8% at 0.3 nC (30 A peak). The maximum output energy is 7 mJ over a 2-{mu}s macropulse. The AFEL performance can be significantly enhanced by improvements in the rf and drive laser stability.

  20. Recent progress of the Los Alamos advanced free electron laser

    SciTech Connect

    Nguyen, D.C.; Austin, R.H.; Chan, K.C.D.; Feldman, D.W.; Goldstein, J.C.; Gierman, S.M.; Kinross-Wright, J.M.; Kong, S.H.; Plato, J.G.; Russell, S.J.

    1994-05-01

    Many industrial and research applications can benefit from the availability of a compact, user-friendly, broadly tunable and high average power free electron laser (FEL). Over the past four years, the Los Alamos Advanced FEL has been built with these design goals. The key to a compact FEL is the integration of advanced beam technologies such as a high-brightness photoinjector, a high-gradient compact linac, and permanent magnet beamline components. These technologies enable the authors to shrink the FEL size yet maintain its high average power capability. The Advanced FEL has been in operation in the near ir (4-6 {mu}m) since early 1993. Recent results of the Advanced FEL lasing at saturation and upgrades to improve its average power are presented.

  1. The Los Alamos Scientific Laboratory - An Isolated Nuclear Research Establishment

    SciTech Connect

    Bradbury, Norris E.; Meade, Roger Allen

    2016-09-23

    Early in his twenty-five year career as the Director of the Los Alamos Scientific Laboratory, Norris Bradbury wrote at length about the atomic bomb and the many implications the bomb might have on the world. His themes were both technical and philosophical. In 1963, after nearly twenty years of leading the nation’s first nuclear weapons laboratory, Bradbury took the opportunity to broaden his writing. In a paper delivered to the International Atomic Energy Agency’s symposium on the “Criteria in the Selection of Sites for the Construction of Reactors and Nuclear Research Centers,” Bradbury took the opportunity to talk about the business of nuclear research and the human component of operating a scientific laboratory. This report is the transcript of his talk.

  2. Neutron Capture Experiments Using the DANCE Array at Los Alamos

    SciTech Connect

    Dashdorj, D.; Mitchell, G. E.; Baramsai, B.; Chyzh, A.; Walker, C.; Agvaanluvsan, U.; Becker, J. A.; Parker, W.; Sleaford, B.; Wu, C. Y.; Bredeweg, T. A.; Couture, A.; Haight, R. C.; Jandel, M.; Rundberg, R. S.; Ullmann, J. L.; Vieira, D. J.; Wouters, J. M.; Krticka, M.; Becvar, F.

    2009-03-31

    The Detector for Advanced Neutron Capture Experiments (DANCE) is designed for neutron capture measurements on very small and/or radioactive targets. The DANCE array of 160 BaF{sub 2} scintillation detectors is located at the Lujan Center at the Los Alamos Neutron Science Center (LANSCE). Accurate measurements of neutron capture data are important for many current applications as well as for basic understanding of neutron capture. The gamma rays following neutron capture reactions have been studied by the time-of-flight technique using the DANCE array. The high granularity of the array allows measurements of the gamma-ray multiplicity. The gamma-ray multiplicities and energy spectra for different multiplicities can be measured and analyzed for spin and parity determination of the resolved resonances.

  3. Study of polyelectrolytes for Los Alamos National Laboratory. Final report

    SciTech Connect

    Labonne, N.

    1994-11-01

    To assess the safety of a potential radioactive waste repository, analysis of the fluid solution containing low levels of activity need to be performed. In some cases, the radioactivity would be so weak (3--30 pCi/L) that the solution must be concentrated for measurement. For this purpose, Los Alamos National Laboratory scientists are synthesizing some water soluble polyelectrolytes, which, because they are strong complexing agents for inorganic cations, can concentrate the radioelements in solution. To assist in characterization of these polyelectrolytes, the author has performed experiments to determine physico-chemical constants, such as pKa values and stability constants. The complexation constants between both polyelectrolytes and europium were determined by two methods: solvent extraction and ion exchange. Results are presented.

  4. Pinon Pine Tree Study, Los Alamos National Laboratory: Source document

    SciTech Connect

    P. R. Fresquez; J. D. Huchton; M. A. Mullen; L. Naranjo, Jr.

    2000-01-01

    One of the dominant tree species growing within and around Los Alamos National Laboratory (LANL), Los Alamos, NM, lands is the pinon pine (Pinus edulis) tree. Pinon pine is used for firewood, fence posts, and building materials and is a source of nuts for food--the seeds are consumed by a wide variety of animals and are also gathered by people in the area and eaten raw or roasted. This study investigated the (1) concentration of {sup 3}H, {sup 137}Cs, {sup 90}Sr, {sup tot}U, {sup 238}Pu, {sup 239,240}Pu, and {sup 241}Am in soils (0- to 12-in. [31 cm] depth underneath the tree), pinon pine shoots (PPS), and pinon pine nuts (PPN) collected from LANL lands and regional background (BG) locations, (2) concentrations of radionuclides in PPN collected in 1977 to present data, (3) committed effective dose equivalent (CEDE) from the ingestion of nuts, and (4) soil to PPS to PPN concentration ratios (CRs). Most radionuclides, with the exception of {sup 3}H in soils, were not significantly higher (p < 0.10) in soils, PPS, and PPN collected from LANL as compared to BG locations, and concentrations of most radionuclides in PPN from LANL have decreased over time. The maximum net CEDE (the CEDE plus two sigma minus BG) at the most conservative ingestion rate (10 lb [4.5 kg]) was 0.0018 mrem (0.018 {micro}Sv). Soil-to-nut CRs for most radionuclides were within the range of default values in the literature for common fruits and vegetables.

  5. SNM holdup assessment of Los Alamos exhaust ducts. Final report

    SciTech Connect

    Marshall, R.S.

    1994-02-01

    Fissile material holdup in glovebox and fume hood exhaust ducting has been quantified for all Los Alamos duct systems. Gamma-based, nondestructive measurements were used to quantify holdup. The measurements were performed during three measurement campaigns. The first campaign, Phase I, provided foot-by-foot, semiquantitative measurement data on all ducting. These data were used to identify ducting that required more accurate (quantitative) measurement. Of the 280 duct systems receiving Phase I measurements, 262 indicated less than 50 g of fissile holdup and 19 indicated fissile holdup of 50 or more grams. Seven duct systems were measured in a second campaign, called Series 1, Phase II. Holdup estimates on these ducts ranged from 421 g of {sup 235}U in a duct servicing a shut-down uranium-machining facility to 39 g of {sup 239}Pu in a duct servicing an active plutonium-processing facility. Measurements performed in the second campaign proved excessively laborious, so a third campaign was initiated that used more efficient instrumentation at some sacrifice in measurement quality. Holdup estimates for the 12 duct systems measured during this third campaign ranged from 70 g of {sup 235}U in a duct servicing analytical laboratories to 1 g of {sup 235}U and 1 g of {sup 239}Pu in a duct carrying exhaust air to a remote filter building. These quantitative holdup estimates support the conclusion made at the completion of the Phase I measurements that only ducts servicing shut-down uranium operations contain about 400 g of fissile holdup. No ventilation ducts at Los Alamos contain sufficient fissile material holdup to present a criticality safety concern.

  6. Environmental Assessment for Electrical Power System Upgrades at Los Alamos National Laboratory, Los Alamos, New Mexico - Final Document

    SciTech Connect

    N /A

    2000-03-09

    The ''National Environmental Policy Act of 1969'' (NEPA) requires Federal agency officials to consider the environmental consequences of their proposed actions before decisions are made. In complying with NEPA, the United States (U.S.) Department of Energy (DOE) follows the Council on Environmental Quality (CEQ) regulations (40 Code of Federal Regulations [CFR] 1500-1508) and DOE's NEPA implementing procedures (10 CFR 1021). The purpose of an Environmental Assessment (EA) is to provide Federal decision makers with sufficient evidence and analysis to determine whether to prepare an Environmental Impact Statement (EIS) or issue a Finding of No Significant Impact. In this case, the DOE decision to be made is whether to construct and operate a 19.5-mile (mi) (31-kilometer [km]) electric transmission line (power line) reaching from the Norton Substation, west across the Rio Grande, to locations within the Los Alamos National Laboratory (LANL) Technical Areas (TAs) 3 and 5 at Los Alamos, New Mexico. The construction of one electric substation at LANL would be included in the project as would the construction of two line segments less than 1,200 feet (ft) (366 meters [m]) long that would allow for the uncrossing of a portion of two existing power lines. Additionally, a fiber optics communications line would be included and installed concurrently as part of the required overhead ground conductor for the power line. The new power line would improve the reliability of electric service in the LANL and Los Aktrnos County areas as would the uncrossing of the crossed segments of the existing lines. Additionally, installation of the new power line would enable the LANL and the Los Alamos County electric grid, which is a shared resource, to be adapted to accommodate the future import of increased power when additional power service becomes available in the northern New Mexico area. Similarly, the fiber optics line would allow DOE to take advantage of future opportunities in

  7. Westinghouse Hanford Company Pollution Prevention Program Implementation Plan

    SciTech Connect

    Floyd, B.C.

    1994-10-01

    This plan documents Westinghouse Hanford Company`s (WHC) Pollution Prevention (P2) (formerly Waste Minimization) program. The program includes WHC; BCS Richland, Inc. (BCSR); and ICF Kaiser Hanford Company (ICF KH). The plan specifies P2 program activities and schedules for implementing the Hanford Site Waste Minimization and Pollution Prevention Awareness (WMin/P2) Program Plan requirements (DOE 1994a). It is intended to satisfy the U.S. Department of Energy (DOE) and other legal requirements that are discussed in both the Hanford Site WMin/P2 plan and paragraph C of this plan. As such, the Pollution Prevention Awareness Program required by DOE Order 5400.1 (DOE 1988) is included in the WHC P2 program. WHC, BCSR, and ICF KH are committed to implementing an effective P2 program as identified in the Hanford Site WMin/P2 Plan. This plan provides specific information on how the WHC P2 program will develop and implement the goals, activities, and budget needed to accomplish this. The emphasis has been to provide detailed planning of the WHC P2 program activities over the next 3 years. The plan will guide the development and implementation of the program. The plan also provides background information on past program activities. Because the plan contains greater detail than in the past, activity scope and implementation schedules may change as new priorities are identified and new approaches are developed and realized. Some activities will be accelerated, others may be delayed; however, all of the general program elements identified in this plan and contractor requirements identified in the Site WMin/P2 plan will be developed and implemented during the next 3 years. This plan applies to all WHC, BCSR, and ICF KH organizations and subcontractors. It will be distributed to those with defined responsibilities in this plan; and the policy, goals, objectives, and strategy of the program will be communicated to all WHC, BCSR, and ICF KH employees.

  8. An overview of the Los Alamos Crestone Project : uses for astrophysical problems

    SciTech Connect

    Weaver, R. P.; Gittings, M. L.; Gisler, Galen R.; Coker, R. F.; New, K. C.; Hueckstaedt, R. M.

    2004-01-01

    The Los Alamos Crestone Project is part of the Department of Energy's (DoE) Advanced Simulation and Computing (ASC) program. The main goal of this project is to investigate the use of continuous adaptive mesh refinement (CAMR) techniques for application to problems of interest to the Laboratory. An overview of the astrophysical simulations performed with the SAGE/RAGE codes will be shown here, including asteroid impacts in the deep-ocean, asteroid impacts on the continental shelf (e.g. - Chicxulub - the dinosaur killer), calculations of massive black holes at the galactic center, and calculations of supernova explosions. Examples of these simulations will be shown. We have shown that the SAGE and RAGE codes of the Crestone Project have been very successful products of the DoE's Advanced Simulation and Computing program. It is clear to those performing massively-parallel computations, that the use of thousands of processors in parallel is fundamentally changing the way we think about computer simulations. The Crestone Project codes are fully utilizing each new ASC supercomputer as they become available. The SAGE and RAGE codes are sophisticated Continuous Adaptive Mesh Refinement hydrodynamics codes for large parallel simulations. SAGE and RAGE are becoming useful tools for astrophysical applications. Further research is starting in a wider variety of areas, including cosmological studies with Mike Norman's group at UCSD.

  9. Review of Rover fuel element protective coating development at Los Alamos

    NASA Technical Reports Server (NTRS)

    Wallace, Terry C.

    1991-01-01

    The Los Alamos Scientific Laboratory (LASL) entered the nuclear propulsion field in 1955 and began work on all aspects of a nuclear propulsion program with a target exhaust temperature of about 2750 K. A very extensive chemical vapor deposition coating technology for preventing catastrophic corrosion of reactor core components by the high temperature, high pressure hydrogen propellant gas was developed. Over the 17-year term of the program, more than 50,000 fuel elements were coated and evaluated. Advances in performance were achieved only through closely coupled interaction between the developing fuel element fabrication and protective coating technologies. The endurance of fuel elements in high temperature, high pressure hydrogen environment increased from several minutes at 2000 K exit gas temperature to 2 hours at 2440 K exit gas temperature in a reactor test and 10 hours at 2350 K exit gas temperature in a hot gas test. The purpose of this paper is to highlight the rationale for selection of coating materials used (NbC and ZrC), identify critical fuel element-coat interactions that had to be modified to increase system performance, and review the evolution of protective coating technology.

  10. CEPPAD, CAMMICE, and RAPID (CCR) Data from Los Alamos National Laboratory (LANL)

    DOE Data Explorer

    The Comprehensive Energetic Particle and Pitch Angle Distribution (CEPPAD) Experiment, the Charge and Mass Magnetospheric Ion Composition Experiment (CAMMICE), and the experiment for Research with Adaptive Particle Imaging Detectors (RAPID) refer to specific instruments mounted on the Polar satellite launched by NASA in February of 1996 and the Cluster II spacecraft launched in 2000 under the auspices of the European Space Operations Centre (ESOC), Germany. All three instruments are participating in the International Solar Terrestrial Physics Program (ISTP), to which the Global Geospace Science Program (GGSP) is the U.S. contribution. The CCR Science Team is composed of members of three instrument teams on the ISTP satellites POLAR and CLUSTER. DOE's Los Alamos National Laboratory is part of that team, and the CCR website is maintained at LANL. CCR Summary Data Plots are available from the LANL website through either the specialized browser or as digitized data from an anonymous FTP. ISTP data of various kinds can be obtained from NASA at http://pwg.gsfc.nasa.gov/istp/

  11. Los Alamos neutron science center nuclear weapons stewardship and unique national scientific capabilities

    SciTech Connect

    Schoenberg, Kurt F

    2010-12-15

    This presentation gives an overview of the Los Alamos Neutron Science Center (LANSCE) and its contributions to science and the nuclear weapons program. LANSCE is made of multiple experimental facilities (the Lujan Center, the Weapons Neutron Research facility (WNR), the Ultra-Cold Neutron facility (UCN), the proton Radiography facility (pRad) and the Isotope Production Facility (IPF)) served by the its kilometer long linear accelerator. Several research areas are supported, including materials and bioscience, nuclear science, materials dynamics, irradiation response and medical isotope production. LANSCE is a national user facility that supports researchers worldwide. The LANSCE Risk Mitigation program is currently in progress to update critical accelerator equipment to help extend the lifetime of LANSCE as a key user facility. The Associate Directorate of Business Sciences (ADBS) plays an important role in the continued success of LANSCE. This includes key procurement support, human resource support, technical writing support, and training support. LANSCE is also the foundation of the future signature facility MARIE (Matter-Radiation Interactions in Extremes).

  12. Ecological baseline studies in Los Alamos and Guaje Canyons County of Los Alamos, New Mexico. A two-year study

    SciTech Connect

    Foxx, T.S.

    1995-11-01

    During the summers of 1993 and 1994, the Biological Resource Evaluations Team (BRET) of the Environmental Protection Group (ESH-8) conducted baseline studies within two canyon systems, Los Alamos and Guaje Canyons. Biological data was collected within each canyon to provide background and baseline information for Ecological Risk models. Baseline studies included establishment of permanent vegetation plots within each canyon along the elevational gradient. Then, in association with the various vegetation types, surveys were conducted for ground dwelling insects, birds, and small mammals. The stream channels associated with the permanent vegetation plots were characterized and aquatic macroinvertebrates collected within the stream monthly throughout a six-month period. The Geographic Position System (GPS) in combination with ARC INFO was used to map the study areas. Considerable data was collected during these surveys and are summarized in individual chapters.

  13. NEPA and NHPA- successful decommissioning of historic Manhattan Project properties at Los Alamos National Laboratory, Los Alamos, New Mexico

    SciTech Connect

    McGehee, E.D.; Pendergrass, A.K.

    1997-05-21

    This paper describes experiences at Los Alamos National Laboratory during the process of planning and executing decommissioning and decontamination activities on a number of properties constructed as part of the Manhattan project. Many of these buildings had been abandoned for many years and were in deteriorating condition, in addition to being contaminated with asbestos, lead based paints and high explosive residues. Due to the age and use of the structures they were evaluated against criteria for the National Register of Historic Places. This process is briefly reviewed, along with the results, as well as actions implemented as a result of the condition and safety of the structures. A number of the structures have been decontaminated and demolished. Planning is still ongoing for the renovation of one structure, and the photographic and drawing records of the properties is near completion.

  14. ICF syndrome mutations cause a broad spectrum of biochemical defects in DNMT3B-mediated de novo DNA methylation.

    PubMed

    Moarefi, Amir H; Chédin, Frédéric

    2011-06-24

    The DNMT3B de novo DNA methyltransferase (DNMT) plays a major role in establishing DNA methylation patterns in early mammalian development, but its catalytic mechanism remains poorly characterized. Here, we provide a comprehensive biochemical analysis of human DNMT3B function through the characterization of a series of site-directed DNMT3B variants associated with immunodeficiency, centromere instability, and facial anomalies (ICF) syndrome. Our data reveal several novel and important aspects of DNMT3B function. First, DNMT3B, unlike DNMT3A, requires a DNA cofactor in order to stably bind to S-adenosyl-l-methionine (SAM), suggesting that it proceeds according to an ordered catalytic scheme. Second, ICF mutations cause a broad spectrum of biochemical defects in DNMT3B function, including defects in homo-oligomerization, SAM binding, SAM utilization, and DNA binding. Third, all tested ICF mutations, including the A766P and R840Q variants, result in altered catalytic properties without interfering with DNMT3L-mediated stimulation; this indicates that DNMT3L is not involved in the pathogenesis of ICF syndrome. Finally, our study reveals a novel level of coupling between substrate binding, oligomerization, and catalysis that is likely conserved within the DNMT3 family of enzymes.

  15. Content Validity of the Comprehensive ICF Core Set for Multiple Sclerosis from the Perspective of Speech and Language Therapists

    ERIC Educational Resources Information Center

    Renom, Marta; Conrad, Andrea; Bascuñana, Helena; Cieza, Alarcos; Galán, Ingrid; Kesselring, Jürg; Coenen, Michaela

    2014-01-01

    Background: The Comprehensive International Classification of Functioning, Disability and Health (ICF) Core Set for Multiple Sclerosis (MS) is a comprehensive framework to structure the information obtained in multidisciplinary clinical settings according to the biopsychosocial perspective of the International Classification of Functioning,…

  16. The Importance of Motor Functional Levels from the Activity Limitation Perspective of ICF in Children with Cerebral Palsy

    ERIC Educational Resources Information Center

    Mutlu, Akmer

    2010-01-01

    Our purpose in this study was to evaluate performance and capacity as defined by Gross Motor Function Classification System (GMFCS) and Manual Ability Classification System (MACS) from the "activity limitation" perspective of International Classification of Functioning, Disability, and Health (ICF) and to investigate the relationship between the…

  17. Satisfaction and Sense of Well Being among Medicaid ICF/MR and HCBS Recipients in Six States

    ERIC Educational Resources Information Center

    Stancliffe, Roger J.; Lakin, K. Charlie; Taub, Sarah; Chiri, Giuseppina; Byun, Soo-yong

    2009-01-01

    Self-reported satisfaction and sense of well-being were assessed in a sample of 1,885 adults with intellectual and developmental disabilities receiving Medicaid Home and Community Based Services (HCBS) and Intermediate Care Facility (ICF/MR) services in 6 states. Questions dealt with such topics as loneliness, feeling afraid at home and in one's…

  18. A Fresh Look at Special Education in Cuba, Based on the Concept of Disability According to the ICF

    ERIC Educational Resources Information Center

    Fuentes, Mirtha Leyva

    2005-01-01

    Approval of the International Classification of Functioning, Disability and Health (ICF) at the 54th World Health Assembly in 2001 gave rise to the new concept of Disability and the new Classification which today are considered central to the International Family of Classifications, along with the ICD-10. Theoretical criteria from a…

  19. [The practical application of the International Classification of Functioning, Disability and Health (ICF) in medical rehabilitation of psychiatric patients].

    PubMed

    Grundmann, J; Keller, K; Bräuning-Edelmann, M

    2005-12-01

    The WHO Classification of Functioning, Disability and Health enables the description of functional health, disability and impairment on an international and interdisciplinary level in a common language. The fundamental underlying assumption of this Classification, which is orientated around a bio-psycho-social model of health and impairment, has been accepted by rehabilitation scientists in general. Unfortunately, the WHO does not make any recommendations as to how this classification could be applied in practice. In this article, various problems are outlined which could occur when the ICF is applied. Furthermore an example from a psychiatric rehabilitation institution illustrates the way the ICF could serve as an instrument for an extensive rehabilitation management programme. Here, Stucki's use will be made of Rehab-Cycle model. This describes a comprehensive sequence of steps which help analyse the patients problems from a patient-centred standpoint, to set up a schedule for treatment and to evaluate the results. Within Stucki's model the ICF is used as a system to analyse problems upon which intervention can be set. This method is illustrated with an example from a rehabilitation case. Summarizing, it is pointed out that through easier communication (as a result of the ICF) interdisciplinary productivity and efficiency will increase. On this basis it is possible to achieve a more comprehensive multimodal approach in the treatment of people suffering from psychic impairments or disability.

  20. Applying the ICF framework to study changes in quality-of-life for youth with chronic conditions

    PubMed Central

    McDougall, Janette; Wright, Virginia; Schmidt, Jonathan; Miller, Linda; Lowry, Karen

    2011-01-01

    Objective The objective of this paper is to describe how the ICF framework was applied as the foundation for a longitudinal study of changes in quality-of-life (QoL) for youth with chronic conditions. Method This article will describe the study’s aims, methods, measures and data analysis techniques. It will point out how the ICF framework was used—and expanded upon—to provide a model for studying the impact of factors on changes in QoL for youth with chronic conditions. Further, it will describe the instruments that were chosen to measure the components of the ICF framework and the data analysis techniques that will be used to examine the impact of factors on changes in youths’ QoL. Conclusions Qualitative and longitudinal designs for studying QoL based on the ICF framework can be useful for unraveling the complex ongoing inter-relationships among functioning, contextual factors and individuals’ perceptions of their QoL. PMID:21034288

  1. Low Back Pain in 17 Countries, a Rasch Analysis of the ICF Core Set for Low Back Pain

    ERIC Educational Resources Information Center

    Roe, Cecilie; Bautz-Holter, Erik; Cieza, Alarcos

    2013-01-01

    Previous studies indicate that a worldwide measurement tool may be developed based on the International Classification of Functioning Disability and Health (ICF) Core Sets for chronic conditions. The aim of the present study was to explore the possibility of constructing a cross-cultural measurement of functioning for patients with low back pain…

  2. The Development of an ICF-Oriented, Adaptive Physician Assessment Instrument of Mobility, Self-care, and Domestic Life

    ERIC Educational Resources Information Center

    Farin, Erik; Fleitz, Annette

    2009-01-01

    The objective of this study was development and psychometric testing of an adaptive, International Classification of Functioning, Disability, and Health (ICF)-oriented questionnaire to be processed by the rehabilitation physician that aids in assessing mobility, self-care, and domestic life (Moses-Physician). The intent is to develop a physician…

  3. Radionuclide concentrations in pinto beans, sweet corn, and zucchini squash grown in Los Alamos Canyon at Los Alamos National Laboratory

    SciTech Connect

    Fresquez, P.R.; Mullen, M.A.; Naranjo, L. Jr.; Armstrong, D.R.

    1997-05-01

    Pinto beans, sweet corn, and zucchini squash (Cucurbita pepo var. black beauty) were grown in a randomized complete-block field/pot experiment at a site that contained the highest observed levels of surface gross gamma radioactivity within Los Alamos Canyon (LAC) at Los Alamos National Laboratory. Soils as well as washed edible and nonedible crop tissues were analyzed for various radionuclides and heavy metals . Most radionuclides, with the exception of {sup 3}H and {sup tot}U, in soil from LAC were detected in significantly higher concentrations (p <0.01) than in soil collected from regional background (RBG) locations. Similarly, most radionuclides in edible crop portions of beans, squash, and corn were detected in significantly higher (p <0.01 and 0.05) concentrations than RBG. Most soil-to-plant concentration ratios for radionuclides in edible and nonedible crop tissues from LAC were within the default values given by the Nuclear Regulatory Commission and Environmental Protection Agency. All heavy metals in soils, as well as edible and nonedible crop tissues grown in soils from LAC, were within RBG concentrations. Overall, the total maximum net positive committed effective dose equivalent (CEDE)--the CEDE plus two sigma for each radioisotope minus background and then all positive doses summed--to a hypothetical 50-year resident that ingested 160 kg of beans, corn, and squash in equal proportions, was 74 mrem y{sup -1}. This dose was below the International Commission on Radiological Protection permissible dose limit (PDL) of 100 mrem y{sup -1} from all pathways; however, the addition of other internal and external exposure route factors may increase the overall dose over the PDL. Also, the risk of an excess cancer fatality, based on 74 mrem y{sup -1}, was 3.7 x 10{sup -5} (37 in a million), which is above the Environmental Protection Agency`s (acceptable) guideline of one in a million. 31 refs., 15 tabs.

  4. Prevalence and features of ICF-disability in Spain as captured by the 2008 National Disability Survey

    PubMed Central

    2011-01-01

    Background Since 1986, the study of disability in Spain has been mainly addressed by National Disability Surveys (NDSs). While international attempts to frame NDS designs within the International Classification of Functioning, Disability and Health (ICF) have progressed, in general, the ICF has hardly been used in either the NDS or epidemiological studies. This study sought to identify ICF Activity- and Participation-related content in the most recent Spanish NDS, the 2008 Survey on Disabilities, Independence and Dependency Situations (Encuesta sobre discapacidades, autonomía personal y situaciones de Dependencia - EDAD 2008), and estimate the prevalence of such ICF-framed disability. Methods EDAD 2008 methods and questions were perused. Of the 51 EDAD items analysed, 29 were backcoded to specific d2-d7 domains of the ICF Checklist and, by rating the recorded difficulty to perform specific tasks with or without help, these were then taken as performance and capacity respectively. A global ICF score was also derived, albeit lacking data for d1, "Learning and applying knowledge", d8, "Major Life Areas" and d9, "Community, Social and Civic Life". Data were grouped by sex, age, residence and initial positive screening, and prevalence figures were calculated by disability level both for the general population, using the originally designed weights, and for the population that had screened positive to disability. Data for institutionalised persons were processed separately. Results Crude prevalence of ICF severe/complete and moderate disability among the community-dwelling population aged ≥6 years was 0.9%-2.2% respectively, and that of severe/complete disability among persons living in sheltered accommodation was 0.3%. Prevalence of severe/complete disability was: higher in women than in men, 0.8% vs. 0.4%; increased with age; and was particularly high in domains such as "Domestic Life", 3.4%, "Mobility", 1.8%, and "Self-care", 1.9%, in which prevalence decreased

  5. Los Alamos National Laboratory: 21st century solutions to urgent national challenges

    SciTech Connect

    Mcbranch, Duncan

    2008-01-01

    Los Alamos National Laboratory has been called upon to meet urgent national challenges for more than 65 years. The people, tools, and technologies at Los Alamos are a world class resource that has proved decisive through our history, and are needed in the future. We offer expertise in nearly every science, technology, and engineering discipline, a unique integrated capability for large-scale computing and experimentation, and the proven ability to deliver solutions involving the most complex and difficult technical systems. This white paper outlines some emerging challenges and why the nation needs Los Alamos, the premier National Security Science Laboratory, to meet these challenges.

  6. Investigating the International Classification of Functioning, Disability, and Health (ICF) Framework to Capture User Needs in the Concept Stage of Rehabilitation Technology Development.

    PubMed

    Sivan, Manoj; Gallagher, Justin; Holt, Ray; Weightman, Andy; Levesley, Martin; Bhakta, Bipin

    2014-01-01

    This study evaluates whether the International Classification of Functioning, Disability, and Health (ICF) framework provides a useful basis to ensure that key user needs are identified in the development of a home-based arm rehabilitation system for stroke patients. Using a qualitative approach, nine people with residual arm weakness after stroke and six healthcare professionals with expertise in stroke rehabilitation were enrolled in the user-centered design process. They were asked, through semi-structured interviews, to define the needs and specification for a potential home-based rehabilitation device to facilitate self-managed arm exercise. The topic list for the interviews was derived by brainstorming ideas within the clinical and engineering multidisciplinary research team based on previous experience and existing literature in user-centered design. Meaningful concepts were extracted from questions and responses of these interviews. These concepts obtained were matched to the categories within the ICF comprehensive core set for stroke using ICF linking rules. Most of the concepts extracted from the interviews matched to the existing ICF Core Set categories. Person factors like gender, age, interest, compliance, motivation, choice, and convenience that might determine device usability are yet to be categorized within the ICF comprehensive core set. The results suggest that the categories of the comprehensive ICF Core Set for stroke provide a useful basis for structuring interviews to identify most users needs. However some personal factors (related to end users and healthcare professionals) need to be considered in addition to the ICF categories.

  7. The International Classification of Functioning, Disability and Health (ICF) Core Sets: application to a postmenopausal woman with rheumatoid arthritis and osteoporosis of the spine.

    PubMed

    Lorbergs, Amanda L; MacIntyre, Norma J

    2013-10-01

    The International Classification of Functioning, Disability and Health (ICF) framework facilitates systematic assessment of functioning across four components. ICF Core Sets are proposed to be beneficial for clinicians in multidisciplinary care settings because they provide a common language for communication. A clinical vignette of a postmenopausal woman with rheumatoid arthritis (RA) and a non-traumatic vertebral fracture is presented to discuss how the ICF Core Sets for RA and osteoporosis (OP) can be helpful in structuring clinical decisions. To demonstrate how condition-specific ICF Core Sets can be used to evaluate and treat women with two comorbidities, each component of the ICF Core Sets is compared across conditions and integrated into clinical decision-making. Topics covered include: exercise tolerance, urinary continence, bone mass, fear of falling, and environmental factors. The benefits of thorough communication with the client and a common language across healthcare disciplines are highlighted as the potential benefits of the ICF framework; however, limitations to uptake of the ICF in clinical practice are also addressed.

  8. Validation of the Italian version of Mini-ICF-APP, a short instrument for rating activity and participation restrictions in psychiatric disorders.

    PubMed

    Balestrieri, M; Isola, M; Bonn, R; Tam, T; Vio, A; Linden, M; Maso, E

    2013-03-01

    Aims. The assessment of limitations in social capacities can be done with the Mini-ICF-APP, a rating scale built in reference to the International Classification of Functioning, Disability and Health (ICF). The aim of this study was to assess the reliability and the convergent validity of the Italian version of this scale. Methods. We recruited 120 consecutive patients diagnosed with schizophrenia, major depression, bipolar I disorder and anxiety disorders. Included measures were the Brief Psychiatric Rating Scale (BPRS), the Clinical Global Impression Scale (CGI-S), the Personal and Social Performance Scale (PSP) and the Social and Occupational Functioning Assessment Scale (SOFAS). Results. The median CGI-S and BPRS scores were 5 and 16.5. Mean Mini-ICF-APP total score was 18.1. Schizophrenics' Mini-ICF-APP score was higher, while that of anxious patients was lower than in the other diagnoses. Intra-class correlations (ICC) revealed a significant inter-rater agreement for total score (ICC 0.987) and for each item of the Mini-ICF-APP. The test-retest agreement was also highly significant (ICC 0.993). The total score of the Mini-ICF-APP obtained good negative correlations with PSP (r s = -0.767) and with SOFAS scores (r s = -0.790). The distribution items of the Mini-ICF-APP showed some skewness, indicating that self-care (item 12) and mobility (item 13) were amply preserved in most patients. The Mini-ICF-APP total score was significantly correlated with both CGI-S (r s = 0.777) and BPRS (r s = 0.729). Conclusions. As a short instrument, the Mini-ICF-APP scale seems to be well suited to everyday psychiatric practice as a means of monitoring changes in psychosocial functioning, in particular in schizophrenic patients.

  9. A coordinate transformation method for calculating the 3D light intensity distribution in ICF hohlraum

    NASA Astrophysics Data System (ADS)

    Lin, Zhili; Li, Xiaoyan; Zhao, Kuixia; Chen, Xudong; Chen, Mingyu; Pu, Jixiong

    2016-06-01

    For an inertial confinement fusion (ICF) system, the light intensity distribution in the hohlraum is key to the initial plasma excitation and later laser-plasma interaction process. Based on the concept of coordinate transformation of spatial points and vector, we present a robust method with a detailed procedure that makes the calculation of the three dimensional (3D) light intensity distribution in hohlraum easily. The method is intuitive but powerful enough to solve the complex cases of random number of laser beams with arbitrary polarization states and incidence angles. Its application is exemplified in the Shenguang III Facility (SG-III) that verifies its effectiveness and it is useful for guiding the design of hohlraum structure parameter.

  10. Using absolute x-ray spectral measurements to infer stagnation conditions in ICF implosions

    NASA Astrophysics Data System (ADS)

    Patel, Pravesh; Benedetti, L. R.; Cerjan, C.; Clark, D. S.; Hurricane, O. A.; Izumi, N.; Jarrott, L. C.; Khan, S.; Kritcher, A. L.; Ma, T.; Macphee, A. G.; Landen, O.; Spears, B. K.; Springer, P. T.

    2016-10-01

    Measurements of the continuum x-ray spectrum emitted from the hot-spot of an ICF implosion can be used to infer a number thermodynamic properties at stagnation including temperature, pressure, and hot-spot mix. In deuterium-tritium (DT) layered implosion experiments on the National Ignition Facility (NIF) we field a number of x-ray diagnostics that provide spatial, temporal, and spectrally-resolved measurements of the radiated x-ray emission. We report on analysis of these measurements using a 1-D hot-spot model to infer thermodynamic properties at stagnation. We compare these to similar properties that can be derived from DT fusion neutron measurements. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

  11. Large Survey of Neutron Spectrum Moments Due to ICF Drive Asymmetry

    NASA Astrophysics Data System (ADS)

    Field, J. E.; Munro, D.; Spears, B.; Peterson, J. L.; Brandon, S.; Gaffney, J. A.; Hammer, J.; Langer, S.; Nora, R. C.; Springer, P.; ICF Workflow Collaboration Collaboration

    2016-10-01

    We have recently completed the largest HYDRA simulation survey to date ( 60 , 000 runs) of drive asymmetry on the new Trinity computer at LANL. The 2D simulations covered a large space of credible perturbations to the drive of ICF implosions on the NIF. Cumulants of the produced birth energy spectrum for DD and DT reaction neutrons were tallied using new methods. Comparison of the experimental spectra with our map of predicted spectra from simulation should provide a wealth of information about the burning plasma region. We report on our results, highlighting areas of agreement (and disagreement) with experimental spectra. We also identify features in the predicted spectra that might be amenable to measurement with improved diagnostics. Prepared by LLNL under Contract DE-AC52-07NA27344. IM release #: LLNL-PROC-697321.

  12. The Broadband Rotational Spectrum and Geometry of N_{2}\\cdotsICF_{3}

    NASA Astrophysics Data System (ADS)

    Walker, N. R.; Hird, D.; Legon, A. C.

    2013-06-01

    The rotational spectra of two isotopologues of N_{2}\\cdotsICF_{3} have been measured between 7 and 18.5 GHz by chirped-pulse Fourier transform microwave spectroscopy. The rotational constant, B}_{0}, the centrifugal distortion constants, D}_J} and D}_JK}, and the nuclear quadrupole coupling constant of ^{127}I are precisely determined for isotopologues containing ^{14}N_{2} and ^{15}N_{2} respectively. The complex is a symmetric top and contains a linear arrangement of C, I, N(1) and N(2) atoms. The length of the halogen bond between N(1) and I will be presented. Experiments which exploit a Balle-Flygare FTMW spectrometer are currently in progress to determine the nuclear quadrupole coupling constants of the ^{14}N nuclei.

  13. Inference of ICF implosion core mix using experimental data and theoretical mix modeling

    SciTech Connect

    Sherrill, Leslie Welser; Haynes, Donald A; Cooley, James H; Sherrill, Manolo E; Mancini, Roberto C; Tommasini, Riccardo; Golovkin, Igor E; Haan, Steven W

    2009-01-01

    The mixing between fuel and shell materials in Inertial Confinement Fusion (lCF) implosion cores is a current topic of interest. The goal of this work was to design direct-drive ICF experiments which have varying levels of mix, and subsequently to extract information on mixing directly from the experimental data using spectroscopic techniques. The experimental design was accomplished using hydrodynamic simulations in conjunction with Haan's saturation model, which was used to predict the mix levels of candidate experimental configurations. These theoretical predictions were then compared to the mixing information which was extracted from the experimental data, and it was found that Haan's mix model predicted trends in the width of the mix layer as a function of initial shell thickness. These results contribute to an assessment of the range of validity and predictive capability of the Haan saturation model, as well as increasing confidence in the methods used to extract mixing information from experimental data.

  14. Status of Indirect Drive ICF Experiments on the National Ignition Facility

    SciTech Connect

    Dewald, E.

    2016-03-21

    In the quest to demonstrate Inertial Confinement Fusion (ICF) ignition of deuterium-tritium (DT) filled capsules and propagating thermonuclear burn with net energy gain (fusion energy/laser energy >1), recent experiments on the National Ignition Facility (NIF) have shown progress towards increasing capsule hot spot temperature (Tion>5 keV) and fusion neutron yield (~1016), while achieving ~2x yield amplification by alpha particle deposition. At the same time a performance cliff was reached, resulting in lower fusion yields than expected as the implosion velocity was increased. Ongoing studies of the hohlraum and capsule physics are attempting to disseminate possible causes for this performance ceiling.

  15. Using gamma-ray emission to measure areal density of ICF capsules

    SciTech Connect

    Hoffman, Nelson M; Wilson, Douglas C; Hermann, Hans W; Young, Carlton S

    2010-01-01

    Fusion neutrons streaming from a burning ICF capsule generate gamma rays via nuclear inelastic scattering in the ablator of the capsule. The intensity of gamma-ray emission is proportional to the product of the ablator areal density ('{rho}R') and the yield of fusion neutrons, so by detecting the gamma rays we can infer the ablator areal density, provided we also have a measurement of the capsule's total neutron yield. In plastic-shell capsules, for example, {sup 12}C nuclei emit gamma rays at 4.44 MeV after excitation by 14.1-MeV neutrons from D+T fusion. These gamma rays can be measured by the Gamma Reaction History (GRH) experiment being built at the National Ignition Facility (NIF). A linear error analysis indicates the chief sources of uncertainty in inferred areal density.

  16. Experimental Study of High-Z Gas Buffers in Gas-Filled ICF Engines

    SciTech Connect

    Rhodes, M A; Kane, J; Loosmore, G; DeMuth, J; Latkowski, J

    2010-12-03

    ICF power plants, such as the LIFE scheme at LLNL, may employ a high-Z, target-chamber gas-fill to moderate the first-wall heat-pulse due to x-rays and energetic ions released during target detonation. To reduce the uncertainties of cooling and beam/target propagation through such gas-filled chambers, we present a pulsed plasma source producing 2-5 eV plasma comprised of high-Z gases. We use a 5-kJ, 100-ns theta discharge for high peak plasma-heating-power, an electrode-less discharge for minimizing impurities, and unobstructed axial access for diagnostics and beam (and/or target) propagation studies. We will report on the plasma source requirements, design process, and the system design.

  17. Preparation of germanium doped plasma polymerized coatings as ICF target ablators

    SciTech Connect

    Brusasco, R M; Saculla, M D; Cook, R C

    1994-10-05

    Targets for Inertial Confinement Fusion (ICF) experiments at the Lawrence Livermore National Laboratory (LLNL) utilize an organic (CH) ablator coating prepared by plasma polymerization. Some of these experiments require a mid-Z dopant in the ablator coating to modify the opacity of the shell. Bromine had been used in the past, but the surface finish of brominated CH degrades rapidly with time upon exposure to air. This paper describes the preparation and characterization of plasma polymer layers containing germanium as a dopant at concentrations of between 1.25 and 2.25 atom percent. The coatings are stable in air and have an rms surface roughness of 7--9 nm (modes 10--1,000) which is similar to that obtained with undoped coatings. High levels of dopant result in cracking of the inner mandrel during target assembly. Possible explanations for the observed cracking behavior will be discussed.

  18. Migration of Sr-20, Cs-137, and Pu-239/240 in Canyon below Los Alamos outfall

    SciTech Connect

    Murphy, J.M.; Mason, C.F.V.; Boak, J.M.; Longmire, P.A.

    1996-04-01

    Technical Area-21 (TA-21) of Los Alamos National Laboratory (LANL) is on a mesa bordered by two canyons DP Canyon and Los Alamos (LA) Canyon. DP Canyon is a small semiarid watershed with a well defined channel system where the stream flow is ephemeral. TA-21 has had a complex history of waste disposal as research to determine the chemical and metallurgical properties of nuclear materials occurred here from 1945-1978. Due to these operations, the TA-21 mesa top and bordering canyons have been monitored and characterized by the LANL Environmental Restoration Program. Results identify radionuclide values at outfall. 21-011 (k) which exceed Screening Action Levels, and points along DP Canyon which exceed regional background levels. The radiocontaminants considered in this study are strontium-90, cesium-137, and plutonium-239. This research examines sediment transport and speciation of radionuclide contaminant migration from a source term named SWMU 21-011 (k) down DP Canyon. Three dimensional surface plots of data from 1977-1994 are used to portray the transport and redistribution of radioactive contaminants in an alluvial stream channel. An overall decrease in contamination concentration since 1983 has been observed which could be due to more stringent laboratory controls and also to the removal of main plutonium processing laboratories to another site.

  19. The Los Alamos Science Pillars The Science of Signatures

    SciTech Connect

    Smith, Joshua E.; Peterson, Eugene J.

    2012-09-13

    As a national security science laboratory, Los Alamos is often asked to detect and measure the characteristics of complex systems and to use the resulting information to quantify the system's behavior. The Science of Signatures (SoS) pillar is the broad suite of technical expertise and capability that we use to accomplish this task. With it, we discover new signatures, develop new methods for detecting or measuring signatures, and deploy new detection technologies. The breadth of work at Los Alamos National Laboratory (LANL) in SoS is impressive and spans from the initial understanding of nuclear weapon performance during the Manhattan Project, to unraveling the human genome, to deploying laser spectroscopy instrumentation on Mars. Clearly, SoS is a primary science area for the Laboratory and we foresee that as it matures, new regimes of signatures will be discovered and new ways of extracting information from existing data streams will be developed. These advances will in turn drive the development of sensing instrumentation and sensor deployment. The Science of Signatures is one of three science pillars championed by the Laboratory and vital to supporting our status as a leading national security science laboratory. As with the other two pillars, Materials for the Future and Information Science and Technology for Predictive Science (IS&T), SoS relies on the integration of technical disciplines and the multidisciplinary science and engineering that is our hallmark to tackle the most difficult national security challenges. Over nine months in 2011 and 2012, a team of science leaders from across the Laboratory has worked to develop a SoS strategy that positions us for the future. The crafting of this strategy has been championed by the Chemistry, Life, and Earth Sciences Directorate, but as you will see from this document, SoS is truly an Institution-wide effort and it has engagement from every organization at the Laboratory. This process tapped the insight and

  20. KiloPower Program

    SciTech Connect

    McClure, Patrick Ray

    2016-08-04

    These are the slides for a phone interview with Aerospace America magazine of the AIAA. It goes over the KiloPower Program at Los Alamos National Laboratory (LANL), and covers the following: 1 kWe Kilopower, 10 kWe Kilopower, Kilopower Reactor Using Stirling Technology (KRUSTY) Integration Test (DAF), Reactor Configuration, and Platen Positions.