Science.gov

Sample records for albuquerque shops machine

  1. Detail of heating coil for Machine Shop (Bldg. 163) ventilation ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of heating coil for Machine Shop (Bldg. 163) ventilation system Note portion of fan visible behind coil - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Machine Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

  2. Looking west at Machine Shop (Bldg. 163) south bay interior. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Looking west at Machine Shop (Bldg. 163) south bay interior. Note the Shaw 15-ton bridge crane. This portion of the building housed machine tools and locomotive component repair functions that supported the erecting shop operations - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Machine Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

  3. Machine Shop (Bldg. 163) north bay, east end interior looking ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Machine Shop (Bldg. 163) north bay, east end interior looking northeast. Note the 250-ton Shaw bridge crane on the upper rails and two smaller P&H bridge cranes on the lower rails. Three cranes shared the lower rails - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Machine Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

  4. Machine Shop Grinding Machines.

    ERIC Educational Resources Information Center

    Dunn, James

    This curriculum manual is one in a series of machine shop curriculum manuals intended for use in full-time secondary and postsecondary classes, as well as part-time adult classes. The curriculum can also be adapted to open-entry, open-exit programs. Its purpose is to equip students with basic knowledge and skills that will enable them to enter the…

  5. 14. Interior, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. Interior, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to north (90mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

  6. 16. Interior, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. Interior, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to south (90mm lens). Note the large segmental-arched doorway to move locomotives in and out of Machine Shop. - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

  7. 15. Interior, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. Interior, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to northeast (90mm lens). The arched cutouts in the bottom chords of the roof trusses were necessary to provide clearance for the smokestacks of steam locomotives, and also mark the location of the former inspection pit in the floor (now filled in and covered by a new concrete floor). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

  8. 6. NORTH END OF MACHINE SHOP. FORGE SHOP (HAER No. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. NORTH END OF MACHINE SHOP. FORGE SHOP (HAER No. CA-326-K) ON LEFT, FORD PLANT IN DISTANCE, NE BY 60. - Rosie the Riveter National Historical Park, Machine Shop, 1311 Canal Boulevard, Richmond, Contra Costa County, CA

  9. Machine Shop: Scope and Sequence.

    ERIC Educational Resources Information Center

    Nashville - Davidson County Metropolitan Public Schools, TN.

    Intended for use by all machine shop instructors in the Metropolitan Nashville Public Schools, this guide provides a sequential listing of course content and scope. A course description provides a brief overview of the content of the courses offered in the machine shop program. General course objectives are then listed. Outlines of the course…

  10. Machine Shop Fundamentals: Part I.

    ERIC Educational Resources Information Center

    Kelly, Michael G.; And Others

    These instructional materials were developed and designed for secondary and adult limited English proficient students enrolled in machine tool technology courses. Part 1 includes 24 lessons covering introduction, safety and shop rules, basic machine tools, basic machine operations, measurement, basic blueprint reading, layout, and bench tools.…

  11. 20. MACHINE SHOP, LOOKING SOUTH. SHOP IS EQUIPPED WITH A ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. MACHINE SHOP, LOOKING SOUTH. SHOP IS EQUIPPED WITH A 25-TON SHAW CRANE TO HANDLE PARTS FROM RAIL CARS INTO THE SHOP. MACHINE SHOP HANDLES ALL NECESSARY REPAIR WORK ON THE DOCK MACHINERY. - Pennsylvania Railway Ore Dock, Lake Erie at Whiskey Island, approximately 1.5 miles west of Public Square, Cleveland, Cuyahoga County, OH

  12. View north of inside machine shop 36; shop floor accommodates ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View north of inside machine shop 36; shop floor accommodates lathes capable of machining a cylinder 60 inches in diameter and 75 feet long; other equipment includes horizontal and vertical jig borders, hydraulic tube straighteners and other equipment for precision machining of large ship components. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Structure Shop, League Island, Philadelphia, Philadelphia County, PA

  13. Machine Shop. Student Learning Guide.

    ERIC Educational Resources Information Center

    Palm Beach County Board of Public Instruction, West Palm Beach, FL.

    This student learning guide contains eight modules for completing a course in machine shop. It is designed especially for use in Palm Beach County, Florida. Each module covers one task, and consists of a purpose, performance objective, enabling objectives, learning activities and resources, information sheets, student self-check with answer key,…

  14. 5. Machine shop and air brake shop sections of roundhouse ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Machine shop and air brake shop sections of roundhouse in background. Foundry (MN-99-B) in foreground. View to south. - Duluth & Iron Range Rail Road Company Shops, Roundhouse, Southwest of downtown Two Harbors, northwest of Agate Bay, Two Harbors, Lake County, MN

  15. 8. VIEW OF THE MACHINE SHOP. BY 1966, THE MACHINE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. VIEW OF THE MACHINE SHOP. BY 1966, THE MACHINE SHOP HANDLED PRIMARILY STAINLESS STEEL COMPONENTS, WHICH WERE SENT TO THE MACHINE SHOP TO BE FORMED INTO THEIR FINAL SHAPES. (7/24/70) - Rocky Flats Plant, General Manufacturing, Support, Records-Central Computing, Southern portion of Plant, Golden, Jefferson County, CO

  16. Standardized Curriculum for Machine Tool Operation/Machine Shop.

    ERIC Educational Resources Information Center

    Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

    Standardized vocational education course titles and core contents for two courses in Mississippi are provided: machine tool operation/machine shop I and II. The first course contains the following units: (1) orientation; (2) shop safety; (3) shop math; (4) measuring tools and instruments; (5) hand and bench tools; (6) blueprint reading; (7)…

  17. 4. GENERAL VIEW LOOKING WEST AT MACHINE SHOP IN KEYSER. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. GENERAL VIEW LOOKING WEST AT MACHINE SHOP IN KEYSER. OLD TRAIN SHED TO RIGHT OF MACHINE SHOP. - Baltimore & Ohio Railroad, Keyser Machine Shop, State Route 46 Northwest of Spring Street, Keyser, Mineral County, WV

  18. Machine Shop. Instructor Key. Supplementary Units.

    ERIC Educational Resources Information Center

    Walden, Charles; Cole, Phyllis

    These supplementary units are designed to help students with special needs learn and apply machine shop skills. Nine competencies that are difficult for special needs students to grasp or that would help them get a future job in the field were chosen from the regular machine shop curriculum. Specific objectives for these competencies are listed at…

  19. Machine Shop. Performance Objectives. Basic Course.

    ERIC Educational Resources Information Center

    Hilton, Arthur; Lambert, George

    Several intermediate performance objectives and corresponding criterion measures are listed for each of 13 terminal objectives for a high school basic machine shop course. The materials were developed for a 36-week course (2 hours daily) designed to enable students to become familiar with the operation of machine shop equipment, to become familiar…

  20. Machine Shop Projects. Instructor Guide. General Information.

    ERIC Educational Resources Information Center

    Westbrook, Raymond E.

    Developed in Georgia, this manual contains 101 projects for use in machine shop courses, arranged according to a suggested machine shop curriculum. Each project, included in a student workbook, contains complete drawings and instructions for implementation. Tasks are listed under the broad headings of measuring, layout, bench work, saws, drilling,…

  1. 18. Interior detail, drill press and grinder, Machine Shop, Roundhouse ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. Interior detail, drill press and grinder, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to east (135mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

  2. 19. Interior detail, grinder and drill press, Machine Shop, Roundhouse ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. Interior detail, grinder and drill press, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to south (135mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

  3. CAR MACHINE SHOP, SECOND FLOOR, LYE TANKS FOR CLEANING METAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CAR MACHINE SHOP, SECOND FLOOR, LYE TANKS FOR CLEANING METAL PRIOR TO PLATING, LOOKING SOUTHWEST FROM ATTIC. - Southern Pacific, Sacramento Shops, Car Machine Shop, 111 I Street, Sacramento, Sacramento County, CA

  4. CAR MACHINE SHOP, SECOND FLOOR, LYE TANKS FOR CLEANING METAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CAR MACHINE SHOP, SECOND FLOOR, LYE TANKS FOR CLEANING METAL PRIOR TO PLATING, LOOKING SOUTH FROM ATTIC. - Southern Pacific, Sacramento Shops, Car Machine Shop, 111 I Street, Sacramento, Sacramento County, CA

  5. CAR MACHINE SHOP, SECOND FLOOR, PAINT SPRAY ROOM EXTERIOR AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CAR MACHINE SHOP, SECOND FLOOR, PAINT SPRAY ROOM EXTERIOR AND ATTIC FLOOR SUPPORT COLUMNS AND BEAMS, LOOKING WEST. - Southern Pacific, Sacramento Shops, Car Machine Shop, 111 I Street, Sacramento, Sacramento County, CA

  6. CAR MACHINE SHOP, FIRST FLOOR, DETAIL OF WOOD COLUMN AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CAR MACHINE SHOP, FIRST FLOOR, DETAIL OF WOOD COLUMN AND INVERTED KING-POST TRUSS TO PROVIDE INCREASED SPAN BETWEEN COLUMNS, LOOKING SOUTH. - Southern Pacific, Sacramento Shops, Car Machine Shop, 111 I Street, Sacramento, Sacramento County, CA

  7. MATC Machine Shop '84: Specific Skill Needs Assessment for Machine Shops in the Milwaukee Area.

    ERIC Educational Resources Information Center

    Roberts, Keith J.

    Building on previous research on the future skill needs of workers in southeastern Wisconsin, a study was conducted at Milwaukee Area Technical College (MATC) to gather information on the machine tool industry in the Milwaukee area. Interviews were conducted by MATC Machine Shop and Tool and Die faculty with representatives from 135 machine shops,…

  8. ERECTING/MACHINE SHOP, CRANE ACCESS GANGWAY BETWEEN ERECTING (L) AND MACHINE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ERECTING/MACHINE SHOP, CRANE ACCESS GANGWAY BETWEEN ERECTING (L) AND MACHINE (R) SHOPS, LOOKING NORTH. - Southern Pacific, Sacramento Shops, Erecting Shop, 111 I Street, Sacramento, Sacramento County, CA

  9. 3. Oblique view of southwest end, Roundhouse Machine Shop Extension, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. Oblique view of southwest end, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to north showing the curvature of the end wall that was the common wall with the Roundhouse, and the large metal-clad doors through which steam locomotives were moved into the Machine Shop (135mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

  10. CAR MACHINE SHOP, FIRST FLOOR, DETAIL OF STEEL COLUMN AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CAR MACHINE SHOP, FIRST FLOOR, DETAIL OF STEEL COLUMN AND BEAM ALTERATION, LOOKING SOUTH. MODIFICATION WAS DONE TO ACCOMMODATE MACHINERY DURING THE BUILDING'S USE AS A WHEEL SHOP. - Southern Pacific, Sacramento Shops, Car Machine Shop, 111 I Street, Sacramento, Sacramento County, CA

  11. 9. Detail, sign at east comer of Roundhouse Machine Shop ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. Detail, sign at east comer of Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to northwest (210mm lens). Sign reads, 'Open Valve To Supply Water To City.' The railroad could supply water to all of Carlin. - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

  12. 6. Northeast end, Roundhouse Machine Shop Extension, Southern Pacific Railroad ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. Northeast end, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to southwest (135mm lens). The tall freestanding smokestack from the Boiler Room originally stood adjacent to this end of the building. - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

  13. 10. Interior, Boiler Room, Roundhouse Machine Shop Extension, Southern Pacific ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. Interior, Boiler Room, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to northwest (90mm lens). The silver stacks suspended from the ceiling in the background mark the former location of the boilers, and served as steam vents. - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

  14. View of machine shops (buildings 17 & 19), east along ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of machine shops (buildings 17 & 19), east along Porter Avenue with quality assurance office (building 121) in foreground. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Machine Shops, League Island, Philadelphia, Philadelphia County, PA

  15. 1. VIEW OF NORTH ELEVATION OF 1865 MACHINE SHOP WITH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. VIEW OF NORTH ELEVATION OF 1865 MACHINE SHOP WITH LATE-NINETEENTH-CENTURY WROUGHT-IRON EXTERIOR STAIRCASE. NOTE SECOND FLOOR CONNECTION TO REAR OF ORIGINAL MILL BUILDING. - Graniteville Mill, Machine Shop, Marshall Street, Graniteville, Aiken County, SC

  16. Production Machine Shop Employment Competencies. Part Four: The Milling Machine.

    ERIC Educational Resources Information Center

    Bishart, Gus; Werner, Claire

    Competencies for production machine shop are provided for the fourth of four topic areas: the milling machine. Each competency appears in a one-page format. It is presented as a goal statement followed by one or more "indicator" statements, which are performance objectives describing an ability that, upon attainment, will establish competency for…

  17. Model Machine Shop for Drafting Instruction.

    ERIC Educational Resources Information Center

    Jackson, Carl R.

    The development and implementation of a two-year interdisciplinary course integrating a machine shop and drafting curriculum are described in the report. The purpose of the course is to provide a learning process in industrial drafting featuring identifiable orientation in skills that will enable the student to develop competencies that are…

  18. Cluster: Metals. Course: Machine Shop. Research Project.

    ERIC Educational Resources Information Center

    Sanford - Lee County Schools, NC.

    The set of 13 units is designed for use with an instructor in actual machine shop practice and is also keyed to audio visual and textual materials. Each unit contains a series of task packages which: specify prerequisites within the series (minimum is Unit 1); provide a narrative rationale for learning; list both general and specific objectives in…

  19. VIEW NORTH EXTREME LEFTBUILDING 32; MACHINE SHOP (1890) SECOND LEFTBUILDING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW NORTH- EXTREME LEFT-BUILDING 32; MACHINE SHOP (1890) SECOND LEFT-BUILDING 31; RIGGER SHOP (1890) CENTER- BUILDING 28; BLACKSMITH SHOP (1885) CENTER RIGHT-BUILDING 27; PATTERN SHOP (C.1853) RIGHT-BUILDING 40; WIRE WAREHOUSE (1915) - John A. Roebling's Sons Company & American Steel & Wire Company, South Broad, Clark, Elmer, Mott & Hudson Streets, Trenton, Mercer County, NJ

  20. VIEW OF TURNTABLE, WITH CAR MACHINE SHOP AND PLANING MILL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF TURNTABLE, WITH CAR MACHINE SHOP AND PLANING MILL IN THE BACKGROUND AND ERECTING/MACHINE SHOP AT RIGHT, LOOKING EAST. ATSF 5021 2-10-4 STEAM LOCOMOTIVE IS ON TURNTABLE. - Southern Pacific, Sacramento Shops, 111 I Street, Sacramento, Sacramento County, CA

  1. Orientation to Machine Shop. Safety, Machine Identification, Metal Identification.

    ERIC Educational Resources Information Center

    Engelbrecht, Nancy; And Others

    These instructional materials provide an orientation to the machine shop for use at the postsecondary level. The first of three sections discusses four important areas of safety: (1) personal safety; (2) safety procedures; (3) safe work practices; and (4) fire prevention. The second section identifies and describes the general purposes of 12…

  2. 9. General view inside machine shop section of roundhouse. View ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. General view inside machine shop section of roundhouse. View to north. - Duluth & Iron Range Rail Road Company Shops, Roundhouse, Southwest of downtown Two Harbors, northwest of Agate Bay, Two Harbors, Lake County, MN

  3. 10. Detail of crane over main floor inside machine shop ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. Detail of crane over main floor inside machine shop section of roundhouse. View to southwest. - Duluth & Iron Range Rail Road Company Shops, Roundhouse, Southwest of downtown Two Harbors, northwest of Agate Bay, Two Harbors, Lake County, MN

  4. INTERIOR VIEW OF MACHINE, METAL AND ELECTRIC SHOPS FROM THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW OF MACHINE, METAL AND ELECTRIC SHOPS FROM THE ELECTRIC SHOP. RAILROAD TRACKS IN FLOOR. VIEW FROM THE WEST - Kekaha Sugar Company, Sugar Mill Building, 8315 Kekaha Road, Kekaha, Kauai County, HI

  5. 72. Left to right: Machine Shop, Hose House behind crane, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    72. Left to right: Machine Shop, Hose House behind crane, tug in Cradle #3, Storge and Joiner Shop, Marine Railway Headhouse and Offices, Cradle #2. - Thames Tow Boat Company, Foot of Farnsworth Street, New London, New London County, CT

  6. 10. Boiler Works, Machine Shop and Pattern Storage, to right; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. Boiler Works, Machine Shop and Pattern Storage, to right; Hose House and Paint Storage, to left; Headhouses, left center; Pipe, Paint, and Electrical Shop center. - Thames Tow Boat Company, Foot of Farnsworth Street, New London, New London County, CT

  7. North side and west end. Machine shop section of roundhouse ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    North side and west end. Machine shop section of roundhouse (MN-99-A) in background. View to southeast - Duluth & Iron Range Rail Road Company Shops, Foundry, Southwest of downtown Two Harbors, northwest of Agate Bay, Two Harbors, Lake County, MN

  8. View north of west gallery of inside machine shop 36; ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View north of west gallery of inside machine shop 36; the gallery housed turret, engine and toolroom lathes, small milling machines and drill presses used for machining small parts. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Structure Shop, League Island, Philadelphia, Philadelphia County, PA

  9. Heavy machine shop on the first floor of building no. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Heavy machine shop on the first floor of building no. 5. Many of the machines shown here are shown in photographs of the late 1880's - Thomas A. Edison Laboratories, Machine Shop & Library, Main Street & Lakeside Avenue, West Orange, Essex County, NJ

  10. Mississippi Curriculum Framework for Machine Tool Operation/Machine Shop (Program CIP: 48.0503--Machine Shop Assistant). Secondary Programs.

    ERIC Educational Resources Information Center

    Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

    This document, which reflects Mississippi's statutory requirement that instructional programs be based on core curricula and performance-based assessment, contains outlines of the instructional units required in local instructional management plans and daily lesson plans for machine tool operation/machine shop I and II. Presented first are a…

  11. 13. Detail of doubledoor opening between machine shop section of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. Detail of double-door opening between machine shop section of roundhouse and engine house section of roundhouse. Engine house visible through rectangular opening. At one time the opening extended to the intrados of the arch above the doorway, allowing railroad engines to fit inside the machine shop. View to east. - Duluth & Iron Range Rail Road Company Shops, Roundhouse, Southwest of downtown Two Harbors, northwest of Agate Bay, Two Harbors, Lake County, MN

  12. MACHINE SHOP AT SHIPYARD NO. 3, VIEW TO WESTSOUTHWEST OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MACHINE SHOP AT SHIPYARD NO. 3, VIEW TO WEST-SOUTHWEST OF THE EAST ELEVATION. LOOKING ACROSS THE RICHMOND INNER HARBOR FROM NEAR THE FORD ASSEMBLY BUILDING - Rosie the Riveter National Historical Park, Machine Shop, 1311 Canal Boulevard, Richmond, Contra Costa County, CA

  13. MACHINE SHOP, PERSPECTIVE VIEW TO NORTHNORTHEAST OF THE WEST SIDE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MACHINE SHOP, PERSPECTIVE VIEW TO NORTH-NORTHEAST OF THE WEST SIDE AND SOUTH END. WEST (REAR) SIDE OF GENERAL WAREHOUSE IS IN RIGHT FOREGROUND - Rosie the Riveter National Historical Park, Machine Shop, 1311 Canal Boulevard, Richmond, Contra Costa County, CA

  14. 6. VIEW OF LATHE OF EAST END OF MACHINE SHOP ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. VIEW OF LATHE OF EAST END OF MACHINE SHOP No. 2 ADDITION. THE 78 1/2' X 100 LATHE BORES OUT CENTERS, OR TREPANNS, OF FORGING. - U.S. Steel Homestead Works, Machine Shop No. 2, Along Monongahela River, Homestead, Allegheny County, PA

  15. WEST END OF SOUTH FACADE OF MACHINE SHOP No. 1. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    WEST END OF SOUTH FACADE OF MACHINE SHOP No. 1. BRICK SECTION ON THE LEFT IS THE FORMER OFFICE OF THE ARMOR PLATE DIVISION BUILT IN 1899 - U.S. Steel Homestead Works, Machine Shop No. 1, Along Monongahela River, Homestead, Allegheny County, PA

  16. 1. EAST END OF MACHINE SHOP No. 2. THE TALL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. EAST END OF MACHINE SHOP No. 2. THE TALL STRUCTURE IS THE VERTICAL FURNACE BUILDING, AND THE TWO-STORY BRICK BUILDING WAS THE HEAT TREATING AND FORGING OFFICE. - U.S. Steel Homestead Works, Machine Shop No. 2, Along Monongahela River, Homestead, Allegheny County, PA

  17. 7. VIEW OF LATHES ON WEST END OF MACHINE SHOP ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. VIEW OF LATHES ON WEST END OF MACHINE SHOP No. 2 ADDITION. LATHE ON LEFT IS 120' (CHUCK) X 72'. LATHE ON RIGHT IS 124' (CHUCK) X 21'. - U.S. Steel Homestead Works, Machine Shop No. 2, Along Monongahela River, Homestead, Allegheny County, PA

  18. 10. INTERIOR OF THE VERTICAL FURNACE BUILDING OF MACHINE SHOP ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. INTERIOR OF THE VERTICAL FURNACE BUILDING OF MACHINE SHOP No. 2. STRUCTURE IN THE FOREGROUND IS THE UPENDER. THE QUENCH TOWER AND FURNACES ARE IN THE BACKGROUND. - U.S. Steel Homestead Works, Machine Shop No. 2, Along Monongahela River, Homestead, Allegheny County, PA

  19. Metalworking Lathe; Machine Shop Work--Intermediate: 9555.03.

    ERIC Educational Resources Information Center

    Dade County Public Schools, Miami, FL.

    The course outline has been prepared as a guide to assist the instructor to plan systematically and to present meaningful lessons to provide the training needed by the machine shop student. This is the third course of instruction in a series of machine shop work courses. The six blocks of instruction contained in this outline are designed to…

  20. 50. INTERIOR VIEW TO SOUTH AT FIRST FLOOR MACHINE SHOP: ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    50. INTERIOR VIEW TO SOUTH AT FIRST FLOOR MACHINE SHOP: Interior view towards south of the machine shop located on the first floor of the powerhouse and car barn. Compare this view with CA-12-74, taken seventeen years earlier. - San Francisco Cable Railway, Washington & Mason Streets, San Francisco, San Francisco County, CA

  1. View southwest of machine shops, building 18 section visible in ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View southwest of machine shops, building 18 section visible in foreground; building 16 section on left. This structure consists of two formerly separate buildings. Jet Lowe, Haer staff photographer, summer 1995. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Machine Shops, League Island, Philadelphia, Philadelphia County, PA

  2. 7. VIEW OF MACHINE SHOP IN BUILDING 881. WORKERS IN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. VIEW OF MACHINE SHOP IN BUILDING 881. WORKERS IN THE MACHINE SHOP FORMED ENRICHED URANIUM COMPONENTS INTO THEIR FINAL SHAPES. (12/12/56) - Rocky Flats Plant, General Manufacturing, Support, Records-Central Computing, Southern portion of Plant, Golden, Jefferson County, CO

  3. Machine Shop. Criterion-Referenced Test (CRT) Item Bank.

    ERIC Educational Resources Information Center

    Davis, Diane, Ed.

    This drafting criterion-referenced test item bank is keyed to the machine shop competency profile developed by industry and education professionals in Missouri. The 16 references used for drafting the test items are listed. Test items are arranged under these categories: orientation to machine shop; performing mathematical calculations; performing…

  4. Machine Shop. Performance Objectives. Intermediate Course. Career Education.

    ERIC Educational Resources Information Center

    Hilton, Arthur; Lambert, George

    Several intermediate performance objectives and corresponding criterion measures are listed for each of eight terminal objectives for a high school intermediate machine shop course. The materials were developed for a 36-week course (3 hours daily) designed to enable students to become familiar with the operation of machine shop equipment, to…

  5. Interior of building 16 section, view north of machine shop, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior of building 16 section, view north of machine shop, showing shrink-fitting a bearing sleeve onto a section of the propeller shaft for the aircraft carrier John F. Kennedy. The lathe on the extreme left of the photograph was used to machine bearing sleeves to final dimensions. This work, in August 1994, was the final major machine shop job done for the U.S. Navy. Photograph by Robert Stewart, August 1994. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Machine Shops, League Island, Philadelphia, Philadelphia County, PA

  6. 42. VIEW TO SOUTH AT FIRST FLOOR MACHINE SHOP: Photocopy ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    42. VIEW TO SOUTH AT FIRST FLOOR MACHINE SHOP: Photocopy of December 1964 photograph showing the machine shop on the first floor of the powerhouse. View towards the south along the east wall of the building. Note the abundance of belt-driven machine tools, several of which are still in use. - San Francisco Cable Railway, Washington & Mason Streets, San Francisco, San Francisco County, CA

  7. 113. VIEW OF MACHINE SHOP FROM WEST. AREA IN FOREGROUND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    113. VIEW OF MACHINE SHOP FROM WEST. AREA IN FOREGROUND WAS ONCE ENCLOSED AS PART OF THE SHOP. THE TRAM LINE AND SNOWSHED RAN TO THE RIGHT (SOUTH) TO EAGLE MINE PORTAL. - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

  8. 12. Detail of engine pit in machine shop section of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. Detail of engine pit in machine shop section of roundhouse. Engine house section of roundhouse visible in background through rectangular openings. View to southeast. - Duluth & Iron Range Rail Road Company Shops, Roundhouse, Southwest of downtown Two Harbors, northwest of Agate Bay, Two Harbors, Lake County, MN

  9. 34. DETAIL INTERIOR VIEW OF MACHINE SHOP ON LEVEL +55 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    34. DETAIL INTERIOR VIEW OF MACHINE SHOP ON LEVEL +55 OF POWERHOUSE #1; CARLTON MACHINE TOOL CO DRILL IS IN LEFT FOREGROUND; SUDBURY MACHINE TOOL CO LATHES ARE IN BACKGROUND. - Bonneville Project, Powerhouse No.1, Spanning Bradford Slough, from Bradford Island, Bonneville, Multnomah County, OR

  10. INTERIOR VIEW OF THE MACHINE, METAL AND ELECTRIC SHOPS. LATHES ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW OF THE MACHINE, METAL AND ELECTRIC SHOPS. LATHES MANUFACTURED BY POND MACHINE TOOL COMPANY AND BENNETT-RAFFIN MACHINE COMPANY ARE TO THE LEFT. VIEW FROM THE EAST - Kekaha Sugar Company, Sugar Mill Building, 8315 Kekaha Road, Kekaha, Kauai County, HI

  11. 61. VIEW OF WAREHOUSE, MACHINE SHOP, AND HOISTING PLANT, WITH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    61. VIEW OF WAREHOUSE, MACHINE SHOP, AND HOISTING PLANT, WITH FOREBAY ON RIGHT IN FOREGROUND, Prints No. 158 and 159, August 1903 - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA

  12. 35. AFT ENGINE ROOM & MACHINE SHOP, LOOKING TOWARDS STARBOARD, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    35. AFT ENGINE ROOM & MACHINE SHOP, LOOKING TOWARDS STARBOARD, SHOWING SHAFT ALLEY. - U.S. Coast Guard Cutter WHITE HEATH, USGS Integrated Support Command Boston, 427 Commercial Street, Boston, Suffolk County, MA

  13. NEW MACHINE SHOP (CENTER). PHOTOCOPY OF c. 1910 VIEW LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    NEW MACHINE SHOP (CENTER). PHOTOCOPY OF c. 1910 VIEW LOOKING NORTHWEST From the collection of the Manchester Historic Association, Manchester, N. H. - Amoskeag Millyard, Canal Street, Manchester, Hillsborough County, NH

  14. 73. INTERIOR VIEW OF MACHINE SHOP LOOKING EAST, NOTE THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    73. INTERIOR VIEW OF MACHINE SHOP LOOKING EAST, NOTE THE MAIN DRIVE SHAFT ON THE CEILING AND DRIVE BELTS TO THE MACHINERY. MAY 8, 1919. - United States Nitrate Plant No. 2, Reservation Road, Muscle Shoals, Muscle Shoals, Colbert County, AL

  15. Photocopy of drawing, May 22, 1919. Machine shop alterations, east ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photocopy of drawing, May 22, 1919. Machine shop alterations, east wing, first and second floor plans and section. Watertown arsenal engineering division. Drawing number 9222. - Watertown Arsenal, Building No. 313, Talcott Avenue, Watertown, Middlesex County, MA

  16. 29. Blast furnace plant, looking southeast. The Machine Shop and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    29. Blast furnace plant, looking southeast. The Machine Shop and Turbo Blower Building are at left, the pig-casting machine and Furnace A at center right. In foregound are the 50-ton ladle cars used to transport hot metal to Valley Mould & Iron Co. - Central Furnaces, 2650 Broadway, east bank of Cuyahoga River, Cleveland, Cuyahoga County, OH

  17. 21. INTERIOR VIEW OF THE MACHINE SHOP LOOKING SOUTH. FROM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. INTERIOR VIEW OF THE MACHINE SHOP LOOKING SOUTH. FROM LEFT TO RIGHT, PULLEY'S ABOVE FOR THE LATHE BELOW, ENTRANCE TO THE ELECTRICAL MOTOR ROOM, BORING MACHINE, PLANER, TOOL, BENCH AGAINST THE BACK WALL, DOORWAY INTO THE ANNEX, LONG LATHE. WOOD STOVE IN THE FOREGROUND RIGHT. - Standard Gold Mill, East of Bodie Creek, Northeast of Bodie, Bodie, Mono County, CA

  18. 22. INTERIOR VIEW OF THE MACHINE SHOP LOOKING NORTH. FROM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. INTERIOR VIEW OF THE MACHINE SHOP LOOKING NORTH. FROM LEFT TO RIGHT, NORTH END OF THE LONG LATHE, WOOD STOVE WITH A BRICK HEARTH FLOOR, FAR BACK LEFT CORNER IS THE MAIN CLUTCH FOR THE MILL POWER SHAFTS, SHAFT LATHE, SMALL PLANER, BORING MACHINE WITH IONIC COLUMN DETAIL., AND THE ENTRANCE TO THE ELECTRICAL MOTOR ROOM. - Standard Gold Mill, East of Bodie Creek, Northeast of Bodie, Bodie, Mono County, CA

  19. 1. VIEW OF GENERAL WAREHOUSE (LEFT) AND MACHINE SHOP (RIGHT) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. VIEW OF GENERAL WAREHOUSE (LEFT) AND MACHINE SHOP (RIGHT) AT SHIPYARD NO. 3, VIEW TO WEST-SOUTHWEST. LOOKING ACROSS RICHMOND INNER HARBOR FROM NEAR THE FORD ASSEMBLY BUILDING. - Rosie the Riveter National Historical Park, General Warehouse, 1320 Canal Boulevard, Richmond, Contra Costa County, CA

  20. 34. AFT ENGINE ROOM & MACHINE SHOP, LOOKING TOWARDS PORT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    34. AFT ENGINE ROOM & MACHINE SHOP, LOOKING TOWARDS PORT AT FRAMING OF VESSEL, (CURVED VERTICAL FRAMING, HORIZONTAL FRAMING, AND CEILING FRAMING). - U.S. Coast Guard Cutter WHITE HEATH, USGS Integrated Support Command Boston, 427 Commercial Street, Boston, Suffolk County, MA

  1. Production Machine Shop Employment Competencies. Part Three: The Engine Lathe.

    ERIC Educational Resources Information Center

    Bishart, Gus; Werner, Claire

    Competencies for production machine shop are provided for the third of four topic areas: the engine lathe. Each competency appears in a one-page format. It is presented as a goal statement followed by one or more "indicator" statements, which are performance objectives describing an ability that, upon attainment, will establish competency for the…

  2. CONTEXT VIEW SHOWING JUXTAPOSITION OF MACHINE SHOP, PEDESTRIAN BRIDGE, HISTORIC ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CONTEXT VIEW SHOWING JUXTAPOSITION OF MACHINE SHOP, PEDESTRIAN BRIDGE, HISTORIC RAIL BED, LUNCH/SHOWER BUILDING, AND HULETTS. LOOKING NORTHEAST. - Pennsylvania Railway Ore Dock, Lake Erie at Whiskey Island, approximately 1.5 miles west of Public Square, Cleveland, Cuyahoga County, OH

  3. 11. VIEW NORTH OF MACHINE SHOP IN BASEMENT OF OLD ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. VIEW NORTH OF MACHINE SHOP IN BASEMENT OF OLD POWERHOUSE, WITH PIPECUTTER (LEFT), DRILL PRESS LEFT (CENTER), AND GRINDER (RIGHT CENTER) BENEATH LINE SHAFTING) - Trenton Falls Hydroelectric Station, Powerhouse & Substation, On west bank of West Canada Creek, along Trenton Falls Road, 1.25 miles north of New York Route 28, Trenton Falls, Oneida County, NY

  4. 11. INTERIOR, NAILING MACHINE IN EAST CENTRAL PORTION OF SHOP ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. INTERIOR, NAILING MACHINE IN EAST CENTRAL PORTION OF SHOP AREA, FROM APPROXIMATELY 50 FEET SOUTH OF SOUTHWEST CORNER OF 'WING', LOOKING NORTH. - Oakland Naval Supply Center, Lumber Storage & Box Factory, East of Fifth Street, between H & I Streets, Oakland, Alameda County, CA

  5. Modern offices now occupying the completely renovated "machine shop" area ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Modern offices now occupying the completely renovated "machine shop" area (see drawing copy NV-35-B-5) at the Southeast corner of the building. - Bureau of Mines Metallurgical Research Laboratory, Original Building, Date Street north of U.S. Highway 93, Boulder City, Clark County, NV

  6. Metals and Alloys; Machine Shop Work 3: 9557.03.

    ERIC Educational Resources Information Center

    Dade County Public Schools, Miami, FL.

    The course outline has been prepared as a guide to assist the instructor in systematically planning and presenting a variety of meaningful lessons to facilitate the necessary training for the machine shop student. The materials are designed to enable the student to learn the manipulative skills and related knowledge necessary to understand…

  7. Assignment Book in Print Reading for Machine Shop.

    ERIC Educational Resources Information Center

    Texas A and M Univ., College Station. Vocational Instructional Services.

    This student assignment book is designed for use in a course on print reading as applied to the machine shop course. Introductory materials include a student progress record, a list of references, and a pretest. For each of eight lessons, information sheets with one or more assignment sheets and a test are provided. The lessons cover the role of…

  8. Machine Shop. Vocational Education Curriculum Guide. Industrial and Technical Education.

    ERIC Educational Resources Information Center

    West Virginia State Vocational Curriculum Lab., Cedar Lakes.

    This curriculum guide contains nine units that provide the basic curriculum components required to develop lesson plans for the machine shop curriculum. The guide is not intended to be a complete, self-contained curriculum, but instead provides the teacher with a number of informational items related to the learning outcomes and allows the teacher…

  9. Machine Shop Practice. Trade and Industrial Education Course of Study.

    ERIC Educational Resources Information Center

    Emerly, Robert J.; And Others

    Designed for secondary school students who are interested in becoming machinists, this beginning course guide in machine shop practice is organized into the following sections: (1) Introduction, (2) instructional plan, (3) educational philosophy, (4) specific course objectives, (5) course outline, (6) job sheets, and (7) operation sheets. The…

  10. Machine Shop. Module 6: Milling. Instructor's Guide.

    ERIC Educational Resources Information Center

    Walden, Charles H.

    This document consists of materials for a 12-unit course on the following topics: (1) introduction to milling; (2) structure and accessories; (3) safety and maintenance; (4) cutting-tool variables; (5) basic set-up activities; (6) squaring a workpiece; (7) hole-making operations; (8) form milling; (9) machining keyways; (10) milling angular…

  11. Machine Shop Operations--2. Milling Machine, Heat Treatment of Metals, and Grinders.

    ERIC Educational Resources Information Center

    Currao, Joseph; Usarzewicz, Louis

    This manual was prepared for the student who plans to enter the machine shop field. The 20 selected jobs provide the student with knowledge and step-by-step procedures for the operation of milling machines. The text is organized so that each job has an objective, tools needed, step-by-step instructions, a progress quiz, and space for reference,…

  12. Machine Shop Milling Machines. Oklahoma Trade and Industrial Education.

    ERIC Educational Resources Information Center

    Dunn, James

    This curriculum guide provides instructional materials designed to equip students with basic knowledge and skills that will enable them to enter the machine trades at the machine-operator level. The curriculum is designed for use in full-time secondary and postsecondary classes and part-time adult classes. It can also be adapted to open-entry,…

  13. Evaluation of Machine Guarding Pilot course taught in Albuquerque, New Mexico, March 25--27, 1992

    SciTech Connect

    Wright, T.S.

    1992-05-01

    This section summarizes trainee evaluations for the Safety Training Section course, Machine Guarding which was conducted at Sandia National Laboratory, in Albuquerque, New Mexico. This class was the second pilot course taught. This report summarizes the quantitative course evaluations that trainees provided upon completion of the course, and provides a transcript of the trainees` written comments. Numeric course ratings were lower than normal and reflect problems that were encountered in this class. The course and knowledge gained by the trainees exceeded some of the students` expectations of the course and results from the final examination indicated that the majority of students gained significant knowledge from the course while others were distracted and gained little from the course. A graph showing the distribution is included.

  14. Evaluation of Machine Guarding Pilot course taught in Albuquerque, New Mexico, March 25--27, 1992

    SciTech Connect

    Wright, T.S.

    1992-05-01

    This section summarizes trainee evaluations for the Safety Training Section course, Machine Guarding which was conducted at Sandia National Laboratory, in Albuquerque, New Mexico. This class was the second pilot course taught. This report summarizes the quantitative course evaluations that trainees provided upon completion of the course, and provides a transcript of the trainees' written comments. Numeric course ratings were lower than normal and reflect problems that were encountered in this class. The course and knowledge gained by the trainees exceeded some of the students' expectations of the course and results from the final examination indicated that the majority of students gained significant knowledge from the course while others were distracted and gained little from the course. A graph showing the distribution is included.

  15. Abrasives and Grinding Machines; Machine Shop Work--Advanced: 9557.02.

    ERIC Educational Resources Information Center

    Dade County Public Schools, Miami, FL.

    The course outline has been prepared as a guide to assist the instructor in systematically planning and presenting a variety of meaningful lessons to facilitate the necessary training for the machine shop student. The material contained in the outline is designed to enable the student to learn the manipulative skills and related knowledge…

  16. Precision Machining and Technology; Machine Shop Work--Advanced: 9557.04.

    ERIC Educational Resources Information Center

    Dade County Public Schools, Miami, FL.

    The course outline has been prepared as a guide to assist the instructor in systematically planning and presenting a variety of meaningful lessons to facilitate the necessary training for the machine shop student. The material is designed to enable the student to learn the manipulative skills and related knowledge necessary to understand the jig…

  17. 8. PWD Drawing 10,220216 (814A3) (1945), 'Machine Shop Building No. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. PWD Drawing 10,220-216 (814-A-3) (1945), 'Machine Shop Building No. 680 Annex, Machine Cleaning Facilities' - Mare Island Naval Shipyard, Chemical Cleaning Facility, North of Fourteenth Street, between California & Railroad Avenue, Vallejo, Solano County, CA

  18. Machine Shop Suggested Job and Task Sheets. Part I. 25 Elementary Jobs.

    ERIC Educational Resources Information Center

    Texas A and M Univ., College Station. Vocational Instructional Services.

    This volume consists of elementary job and task sheets adaptable for use in the regular vocational industrial education programs for the training of machinists and machine shop operators. Twenty-five simple machine shop job sheets are included. Some or all of this material is provided for each job sheet: an introductory sheet with aim, checking…

  19. Machine Shop Suggested Job and Task Sheets. Part II. 21 Advanced Jobs.

    ERIC Educational Resources Information Center

    Texas A and M Univ., College Station. Vocational Instructional Services.

    This volume consists of advanced job and task sheets adaptable for use in the regular vocational industrial education programs for the training of machinists and machine shop operators. Twenty-one advanced machine shop job sheets are included. Some or all of this material is provided for each job: an introductory sheet with aim, checking…

  20. Articulated, Performance-Based Instruction Objectives Guide for Machine Shop Technology.

    ERIC Educational Resources Information Center

    Henderson, William Edward, Jr., Ed.

    This articulation guide contains 21 units of instruction for two years of machine shop. The objectives of the program are to provide the student with the basic terminology and fundamental knowledge and skills in machining (year 1) and to teach him/her to set up and operate machine tools and make or repair metal parts, tools, and machines (year 2).…

  1. Determinants of exposure to metalworking fluid aerosol in small machine shops.

    PubMed

    Ross, Andrew S; Teschke, Kay; Brauer, Michael; Kennedy, Susan M

    2004-07-01

    The purpose of this study was to evaluate personal exposure to metalworking fluid (MWF) aerosols in very small machine shops (1-8 machinists per shop) and to investigate workplace factors associated with exposures. A total of 20 willing machine shops in Vancouver, Canada (from 46 eligible shops, 43%) and 88 machinists participated (participation rate for machinists 92%). Most machinists wore two personal sampling trains (an open-faced 37 mm cassette and a PM10 impactor) on each of two full work shifts. Observational data were collected regarding potential determinants of exposure at 15 min intervals throughout each shift. A total of 322 personal samples were taken over 54 days. Mean aerosol exposure was 0.32 mg/m3 (range 0.06-2.19) for the 37 mm cassette samples and 0.27 mg/m3 (range 0.026-3.67) for PM10. Exposures from the two sampler types were highly correlated (R = 0.86). The mean shop-specific ratio comparing exposure from the 37 mm cassette with that from the PM10 sampler was 1.43 and varied significantly across shops, ranging from 0.97 to 2.19. Machine, task and shop characteristics associated with significantly increased aerosol exposure included the proportion of time spent grinding, operating an enclosed computer controlled machine, the presence of welding in the shop for both sampler types and the number of machines using MWF for PM10 samples only. Factors associated with reduced aerosol exposure included machining aluminum, milling, the height (and shape) of the shop roof (for both sample types) and the presence of mechanical shop ventilation (for the 37 mm cassette samples).

  2. MTR WING, TRA604. FIRST FLOOR PLAN. ENTRY LOBBY, MACHINE SHOP, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MTR WING, TRA-604. FIRST FLOOR PLAN. ENTRY LOBBY, MACHINE SHOP, INSTRUMENT SHOP, COUNTING ROOM, HEALTH PHYSICS LAB, LABS AND OFFICES, STORAGE, SHIPPING AND RECEIVING. BLAW-KNOX 3150-4-2, 7/1950. INL INDEX NO. 053-604-00-099-100008, REV. 7. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  3. Machine Shop Practice, 13-2. Military Curriculum Materials for Vocational and Technical Education.

    ERIC Educational Resources Information Center

    Army Ordnance Center and School, Aberdeen Proving Ground, MD.

    This military-developed text consists of self-instructional materials dealing with the basic tools and equipment used in metalworking shops. Covered in the individual lessons are the following topics: materials and processes; shop mathematics; blueprint reading and sketching; handtools, measuring instruments, and basic metalworking machines;…

  4. Longitudinal view of deck. Machine shop section of roundhouse (MN99A) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Longitudinal view of deck. Machine shop section of roundhouse (MN-99-A) in background at left. View to east - Duluth & Iron Range Rail Road Company Shops, Loading Dock, Southwest of downtown Two Harbors, northwest of Agate Bay, Two Harbors, Lake County, MN

  5. WEST ELEVATION OF MACHINE SHOP, WITH BOILER HOUSE FAÇADE TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    WEST ELEVATION OF MACHINE SHOP, WITH BOILER HOUSE FAÇADE TO THE RIGHT AND MILL B CLEANING STATION TO THE LEFT. VIEW FROM THE NORTH. - Lihue Plantation Company, Sugar Mill Building, Haleko Road, Lihue, Kauai County, HI

  6. MTRETR MAINTENANCE SHOP, TRA653. FLOOR PLAN FOR FIRST FLOOR: MACHINE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MTR-ETR MAINTENANCE SHOP, TRA-653. FLOOR PLAN FOR FIRST FLOOR: MACHINE SHOP, ELECTRICAL AND INSTRUMENT SHOP, TOOL CRIB, ELECTRONIC SHOP, LOCKER ROOM, SPECIAL TEMPERATURE CONTROLLED ROOM, AND OFFICES. "NEW" ON DRAWING REFERS TO REVISION OF 11/1956 DRAWING ON WHICH AREAS WERE DESIGNATED AS "FUTURE." HUMMEL HUMMEL & JONES 810-MTR-ETR-653-A-7, 5/1957. INL INDEX NO. 532-0653-00-381-101839, REV. 2. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  7. Two episodes of acute illness in a machine shop

    SciTech Connect

    Sinks, T.; Kerndt, P.R.; Wallingford, K.M.

    1989-08-01

    Following an explosion in a machine shop and temporary plant closure, on the day the plant returned to full operations a degreaser malfunctioned. Workers in the assembly room were exposed to trichloroethylene levels later estimated to have exceeded 220 ppm (OSHA PEL 100 ppm). The plant was evacuated and the degreaser taken out of operation. Blood testing for carbon monoxide (CO) on five employees found carboxyhemoglobin levels in excess of normal. The plant reopened the following morning. Over the next two weeks, 15 employees were seen by the plant nurses for similar complaints; although all returned to work, their carboxyhemoglobin levels, later found to be inaccurate, were reported by a local medical clinic to range from 13.7 to 20.0 percent. At the end of the second week, another outbreak of illness occurred, but carboxyhemoglobin, trichloroethylene, fluorocarbons, and methylene chloride were not elevated in all 17 persons tested; plant-wide monitoring for CO found no elevated levels. During the first outbreak of illness, cases were 2.26 times as likely to have entered the assembly room as noncases. During the second outbreak, cases were no more likely than noncases to have entered the assembly room. We believe the explosion, earlier toxic exposures and illness, and the misleading blood test results led to plant-wide anxiety which culminated in a collective stress reaction and the second outbreak. An open meeting with all employees, informing them of our findings, provided reassurance and no further episodes of illness occurred in this workforce.

  8. Beryllium contamination inside vehicles of machine shop workers

    SciTech Connect

    Sanderson, W.T.; Henneberger, P.K.; Martyny, J.; Ellis, K.; Mroz, M.M.; Newman, L.S. |

    1999-04-01

    Inhalation of beryllium particles causes a chronic, debilitating lung disease--chronic beryllium disease (CBD)--in immunologically sensitized workers. Evidence that very low concentrations of beryllium may initiate this chronic disease is provided by incidences of the illness in family members exposed to beryllium dust from workers` clothes and residents in neighborhoods surrounding beryllium refineries. This article describes the results of a cross-sectional survey to evaluate potential take-home beryllium exposures by measuring surface concentrations on the hands and in vehicles of workers at a precision machine shop where cases of CBD had recently been diagnosed. Many workers did not change out of their work clothes and shoes at the end of their shift, increasing the risk of taking beryllium home to their families. Wipe samples collected from workers` hands and vehicle surfaces were analyzed for beryllium content by inductively coupled argon plasma-atomic emission spectroscopy (ICP-AES). The results ranged widely, from nondetectable to 40 {micro}g/ft{sup 2} on workers` hands and up to 714 {micro}g/fg{sup 2} inside their vehicles, demonstrating that many workers carried residual beryllium on their hands and contaminated the inside of their vehicles when leaving work. The highest beryllium concentrations inside the workers` vehicles were found on the drivers` floor (GM = 19 {micro}g/ft{sup 2}, GSD = 4.9), indicating that workers were carrying beryllium on their shoes into their vehicles. A safe level of beryllium contamination on surfaces is not known, but it is prudent to reduce the potential for workers to carry beryllium away from the work site.

  9. Two episodes of acute illness in a machine shop.

    PubMed Central

    Sinks, T; Kerndt, P R; Wallingford, K M

    1989-01-01

    Following an explosion in a machine shop and temporary plant closure, on the day the plant returned to full operations a degreaser malfunctioned. Workers in the assembly room were exposed to trichloroethylene levels later estimated to have exceeded 220 ppm (OSHA PEL 100 ppm). The plant was evacuated and the degreaser taken out of operation. Blood testing for carbon monoxide (CO) on five employees found carboxyhemoglobin levels in excess of normal. The plant reopened the following morning. Over the next two weeks, 15 employees were seen by the plant nurses for similar complaints; although all returned to work, their carboxyhemoglobin levels, later found to be inaccurate, were reported by a local medical clinic to range from 13.7 to 20.0 percent. At the end of the second week, another outbreak of illness occurred, but carboxyhemoglobin, trichloroethylene, fluorocarbons, and methylene chloride were not elevated in all 17 persons tested; plant-wide monitoring for CO found no elevated levels. During the first outbreak of illness, cases were 2.26 times as likely to have entered the assembly room as noncases. During the second outbreak, cases were no more likely than noncases to have entered the assembly room. We believe the explosion, earlier toxic exposures and illness, and the misleading blood test results led to plant-wide anxiety which culminated in a collective stress reaction and the second outbreak. An open meeting with all employees, informing them of our findings, provided reassurance and no further episodes of illness occurred in this workforce. PMID:2751018

  10. Effectiveness of Podcasts as Laboratory Instructional Support: Learner Perceptions of Machine Shop and Welding Students

    ERIC Educational Resources Information Center

    Lauritzen, Louis Dee

    2014-01-01

    Machine shop students face the daunting task of learning the operation of complex three-dimensional machine tools, and welding students must develop specific motor skills in addition to understanding the complexity of material types and characteristics. The use of consumer technology by the Millennial generation of vocational students, the…

  11. A&M. TAN607. Detail of interior of machine shop. Camera facing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. TAN-607. Detail of interior of machine shop. Camera facing southeast. Note pumice block wall, rail for bridge crane. Date: August 20, 1954. INEEL negative no. 11707 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  12. Production Machine Shop Employment Competencies. Part Two: Saws, Drills, and Grinders.

    ERIC Educational Resources Information Center

    Bishart, Gus; Werner, Claire

    Competencies for production machine shop are provided for the second of four topic areas: saws, drills, and grinders. Each competency appears in a one-page format. It is presented as a goal statement followed by one or more "indicator" statements, which are performance objectives describing an ability that, upon attainment, will establish…

  13. The Relevance of Machine Shop Engineering Programs in Technical Colleges to Industry in Zimbabwe.

    ERIC Educational Resources Information Center

    Gweru, Sisco

    A study investigated the relationship between existing machine shop engineering programs in technical colleges and the requirements of industry in Zimbabwe. Data were collected from the principals, department headmasters, and a sample of lecturers and students at two colleges, and from personnel managers and workshop managers at nine companies…

  14. Scheduling of flow shop problems on 3 machines in fuzzy environment with double transport facility

    NASA Astrophysics Data System (ADS)

    Sathish, Shakeela; Ganesan, K.

    2016-06-01

    Flow shop scheduling is a decision making problem in production and manufacturing field which has a significant impact on the performance of an organization. When the machines on which jobs are to be processed are placed at different places, the transportation time plays a significant role in production. Further two different transport agents where 1st takes the job from 1st machine to 2nd machine and then returns back to the first machine and the 2nd takes the job from 2nd machine to 3rd machine and then returns back to the 2nd machine are also considered. We propose a method to minimize the total make span; without converting the fuzzy processing time to classical numbers by using a new type of fuzzy arithmetic and a fuzzy ranking method. A numerical example is provided to explain the proposed method.

  15. Job shop scheduling model for non-identic machine with fixed delivery time to minimize tardiness

    NASA Astrophysics Data System (ADS)

    Kusuma, K. K.; Maruf, A.

    2016-02-01

    Scheduling non-identic machines problem with low utilization characteristic and fixed delivery time are frequent in manufacture industry. This paper propose a mathematical model to minimize total tardiness for non-identic machines in job shop environment. This model will be categorized as an integer linier programming model and using branch and bound algorithm as the solver method. We will use fixed delivery time as main constraint and different processing time to process a job. The result of this proposed model shows that the utilization of production machines can be increase with minimal tardiness using fixed delivery time as constraint.

  16. Machine Shop I. Oklahoma Trade and Industrial Education.

    ERIC Educational Resources Information Center

    Dunn, James

    Designed to provide the basic knowledge and hands-on skills necessary to prepare job-ready machinist trainees, these instructional materials focus on the following areas of trade and industrial education: orientation, basic and related technology, hand and bench work, and power saws and drilling machines. Suitable for use in secondary,…

  17. V-TECS Guide for Machine Shop (Machinist).

    ERIC Educational Resources Information Center

    Gregory, Margaret R.; Benson, Robert T.

    This curriculum guide is intended to train trade and industrial education students in the hands-on aspects of the occupation of machinist. Included in the guide are course outlines that deal with the following topics: following safety procedures; performing mathematical calculations; designing and planning machine work; performing precision…

  18. Increasing the life of cutting fluids used in the LLNL machine shop

    SciTech Connect

    Cadena, C.A.; da Roza, R.A.; Johnson, J.S.; Szidon, R.D.

    1981-11-18

    The objective of this study was to extend the working life of cutting fluids used in metal machining operations at LLNL. The characteristics of the fluids in nine different machines were studied. The pH, bacteria level, percent coolant concentrate, percent tramp oil, and total undissolved solids were monitored on a week-to-week basis for 6 weeks. During this time, the criteria and procedures used for changing the cutting fluids in the machines were also observed. Although the study is incomplete, the following recommendations were made. Cutting fluids should be diluted with deionized water and the concentration of the cutting fluid should be monitored regularly with a refractometer. A bactericide should be added to the cutting fluid. The machines should have a thorough initial cleaning and machine oil leaks should be eliminated. Only one cutting fluid should be used throughout the shop. Methods for removing metal particles from used cutting oils should be investigated. (LCL)

  19. Incidence of cancer among welders, platers, machinists, and pipe fitters in shipyards and machine shops.

    PubMed

    Tola, S; Kalliomäki, P L; Pukkala, E; Asp, S; Korkala, M L

    1988-04-01

    The incidence of cancer in 12,693 shipyard and machine shop male workers (1689 welders, 4308 platers, 6003 machinists, 693 pipe fitters) employed for at least one year between 1945 and 1960 was investigated in a retrospective cohort study. The welders had welded only mild steel and had not been exposed to hexavalent chromium containing fume. The follow up was 99.7% complete and the total number of person-years was 304,682. The incidence of cancer in 1953-81 was ascertained through the Finnish Cancer Registry. The observed numbers of cases of cancer were compared with the expected numbers based on regional urban rates. The smoking habits of the cohort were surveyed with a postal questionnaire sent to a sample of 961 workers. The smoking habits of the cohorts were similar and smoking was not more common than among the general population. The total number of cases of cancer was 611 (exp 629) among the shipyard workers and 376 (exp 388) among the machine shop workers. The incidence of lung cancer was increased among the shipyard workers (obs 227, exp 192). This excess was observed in all the worker groups and was most evident for the pipe fitters and platers. Among the machine shop workers, the incidence of lung cancer was lower than expected with the exception of the welders who had a slightly raised risk of lung cancer (obs 14, exp 10). The incidence of laryngeal cancer was slightly raised among the shipyard workers (obs 24, exp 20) but not in the machine shop workers. No excess risk was observed among the welders. The incidence of cancer of the prostate was increased among the machine shop workers (obs 39, exp 31) but not in the shipyard workers. The excess was statistically significant for the welders. No pronounced excess could be found for other types of cancer. Analysis by the duration or exposure showed that the excess of lung cancer in the shipyard workers was most evident during the last period of observation (1972-81). No other trends were obvious and the

  20. Incidence of cancer among welders, platers, machinists, and pipe fitters in shipyards and machine shops.

    PubMed Central

    Tola, S; Kalliomäki, P L; Pukkala, E; Asp, S; Korkala, M L

    1988-01-01

    The incidence of cancer in 12,693 shipyard and machine shop male workers (1689 welders, 4308 platers, 6003 machinists, 693 pipe fitters) employed for at least one year between 1945 and 1960 was investigated in a retrospective cohort study. The welders had welded only mild steel and had not been exposed to hexavalent chromium containing fume. The follow up was 99.7% complete and the total number of person-years was 304,682. The incidence of cancer in 1953-81 was ascertained through the Finnish Cancer Registry. The observed numbers of cases of cancer were compared with the expected numbers based on regional urban rates. The smoking habits of the cohort were surveyed with a postal questionnaire sent to a sample of 961 workers. The smoking habits of the cohorts were similar and smoking was not more common than among the general population. The total number of cases of cancer was 611 (exp 629) among the shipyard workers and 376 (exp 388) among the machine shop workers. The incidence of lung cancer was increased among the shipyard workers (obs 227, exp 192). This excess was observed in all the worker groups and was most evident for the pipe fitters and platers. Among the machine shop workers, the incidence of lung cancer was lower than expected with the exception of the welders who had a slightly raised risk of lung cancer (obs 14, exp 10). The incidence of laryngeal cancer was slightly raised among the shipyard workers (obs 24, exp 20) but not in the machine shop workers. No excess risk was observed among the welders. The incidence of cancer of the prostate was increased among the machine shop workers (obs 39, exp 31) but not in the shipyard workers. The excess was statistically significant for the welders. No pronounced excess could be found for other types of cancer. Analysis by the duration or exposure showed that the excess of lung cancer in the shipyard workers was most evident during the last period of observation (1972-81). No other trends were obvious and the

  1. Two-machine flow shop scheduling integrated with preventive maintenance planning

    NASA Astrophysics Data System (ADS)

    Wang, Shijin; Liu, Ming

    2016-02-01

    This paper investigates an integrated optimisation problem of production scheduling and preventive maintenance (PM) in a two-machine flow shop with time to failure of each machine subject to a Weibull probability distribution. The objective is to find the optimal job sequence and the optimal PM decisions before each job such that the expected makespan is minimised. To investigate the value of integrated scheduling solution, computational experiments on small-scale problems with different configurations are conducted with total enumeration method, and the results are compared with those of scheduling without maintenance but with machine degradation, and individual job scheduling combined with independent PM planning. Then, for large-scale problems, four genetic algorithm (GA) based heuristics are proposed. The numerical results with several large problem sizes and different configurations indicate the potential benefits of integrated scheduling solution and the results also show that proposed GA-based heuristics are efficient for the integrated problem.

  2. Scheduling algorithm for flow shop with two batch-processing machines and arbitrary job sizes

    NASA Astrophysics Data System (ADS)

    Cheng, Bayi; Yang, Shanlin; Hu, Xiaoxuan; Li, Kai

    2014-03-01

    This article considers the problem of scheduling two batch-processing machines in flow shop where the jobs have arbitrary sizes and the machines have limited capacity. The jobs are processed in batches and the total size of jobs in each batch cannot exceed the machine capacity. Once a batch is being processed, no interruption is allowed until all the jobs in it are completed. The problem of minimising makespan is NP-hard in the strong sense. First, we present a mathematical model of the problem using integer programme. We show the scale of feasible solutions of the problem and provide optimality properties. Then, we propose a polynomial time algorithm with running time in O(nlogn). The jobs are first assigned in feasible batches and then scheduled on machines. For the general case, we prove that the proposed algorithm has a performance guarantee of 4. For the special case where the processing times of each job on the two machines satisfy p 1 j = ap 2 j , the performance guarantee is ? for a > 0.

  3. Shaper and Milling Machine Operation, Machine Shop Work 2: 9555.04.

    ERIC Educational Resources Information Center

    Dade County Public Schools, Miami, FL.

    The course outline has been prepared to assist the student in learning the basic skills and safety for shaper and milling operations. The course presents the various types of machines, work holding devices, cutting tools and feeds and speeds, and instruction designed to enable the student to obtain the manipulative skills and related knowledge…

  4. Reliability of the hospital nutrition environment scan for cafeterias, vending machines, and gift shops.

    PubMed

    Winston, Courtney P; Sallis, James F; Swartz, Michael D; Hoelscher, Deanna M; Peskin, Melissa F

    2013-08-01

    According to ecological models, the physical environment plays a major role in determining individual health behaviors. As such, researchers have started targeting the consumer nutrition environment of large-scale foodservice operations when implementing obesity-prevention programs. In 2010, the American Hospital Association released a call-to-action encouraging health care facilities to join in this movement and improve their facilities' consumer nutrition environments. The Hospital Nutrition Environment Scan (HNES) for Cafeterias, Vending Machines, and Gift Shops was developed in 2011, and the present study evaluated the inter-rater reliability of this instrument. Two trained raters visited 39 hospitals in southern California and completed the HNES. Percent agreement, kappa statistics, and intraclass correlation coefficients were calculated. Percent agreement between raters ranged from 74.4% to 100% and kappa statistics ranged from 0.458 to 1.0. The intraclass correlation coefficient for the overall nutrition composite scores was 0.961. Given these results, the HNES demonstrated acceptable reliability metrics and can now be disseminated to assess the current state of hospital consumer nutrition environments. PMID:23747171

  5. 13. Interior detail, Blacksmith Shop, showing a portion of the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. Interior detail, Blacksmith Shop, showing a portion of the original overhead belt drive system that powered machine tools in the adjacent Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to west, 135mm lens. - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

  6. Job-base conditions in the three-machine flow-shop makespan scheduling problem with separated sequence-independent setup times

    NASA Astrophysics Data System (ADS)

    Nabeshima, I.

    1986-09-01

    The purpose of this paper is to present sufficiently optimal job-base conditions for a specified sequence in the NP-complete three-machine permutation flow-shop makespan scheduling problem with separated sequence-independent setup times, contrary to the machine-base conditions proposed in the previous papers. Those conditions give us a chance to identify an optimal sequence in O (n sub 2) operations especially in the case where no existing machine-base condition can identify an optimal sequence. As a special case, we have similar known results associated with the usual flow-shop case with setup times included.

  7. An effective shuffled frog-leaping algorithm for solving the hybrid flow-shop scheduling problem with identical parallel machines

    NASA Astrophysics Data System (ADS)

    Xu, Ye; Wang, Ling; Wang, Shengyao; Liu, Min

    2013-12-01

    In this article, an effective shuffled frog-leaping algorithm (SFLA) is proposed to solve the hybrid flow-shop scheduling problem with identical parallel machines (HFSP-IPM). First, some novel heuristic decoding rules for both job order decision and machine assignment are proposed. Then, three hybrid decoding schemes are designed to decode job order sequences to schedules. A special bi-level crossover and multiple local search operators are incorporated in the searching framework of the SFLA to enrich the memetic searching behaviour and to balance the exploration and exploitation capabilities. Meanwhile, some theoretical analysis for the local search operators is provided for guiding the local search. The parameter setting of the algorithm is also investigated based on the Taguchi method of design of experiments. Finally, numerical testing based on well-known benchmarks and comparisons with some existing algorithms are carried out to demonstrate the effectiveness of the proposed algorithm.

  8. Albuquerque, NM, USA

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Albuquerque, NM (35.0N, 106.5W) is situated on the edge of the Rio Grande River and flood plain which cuts across the image. The reddish brown surface of the Albuquerque Basin is a fault depression filled with ancient alluvial fan and lake bed sediments. On the slopes of the Manzano Mountains to the east of Albuquerque, juniper and other timber of the Cibola National Forest can be seen as contrasting dark tones of vegetation.

  9. Albuquerque's Environmental Story.

    ERIC Educational Resources Information Center

    Rosner, Joan; And Others

    This teachers' resource guide contains four sections in addition to an introduction. The first section is an interdisciplinary look at the major natural areas in and around Albuquerque. This is followed by a review of the city's cultural history and a glimpse into the interactions people of Albuquerque have had with their natural environment. The…

  10. Expanding Options. A Model to Attract Secondary Students into Nontraditional Vocational Programs. For Emphasis in: Building Trades, Electronics, Health Services, Machine Shop, Welding.

    ERIC Educational Resources Information Center

    Good, James D.; DeVore, Mary Ann

    This model has been designed for use by Missouri secondary schools in attracting females and males into nontraditional occupational programs. The research-based strategies are intended for implementation in the following areas: attracting females into building trades, electronics, machine shop, and welding; and males into secondary health…

  11. Albuquerque Basin seismic network

    USGS Publications Warehouse

    Jaksha, Lawrence H.; Locke, Jerry; Thompson, J.B.; Garcia, Alvin

    1977-01-01

    The U.S. Geological Survey has recently completed the installation of a seismic network around the Albuquerque Basin in New Mexico. The network consists of two seismometer arrays, a thirteen-station array monitoring an area of approximately 28,000 km 2 and an eight-element array monitoring the area immediately adjacent to the Albuquerque Seismological Laboratory. This report describes the instrumentation deployed in the network.

  12. Machine Shop. Module 4: Power Saw and Drill Press Operation. Instructor's Guide.

    ERIC Educational Resources Information Center

    Walden, Charles H.; Daniel, Bill

    This document consists of materials for a six-unit course on the following topics: (1) power saw safety and maintenance; (2) cutting stock to length; (3) band machining and contouring; (4) drill press types and safety; (5) drill press work-holding devices; and (6) tools and tool holders. The instructor's guide begins with a list of competencies…

  13. Optimization process planning using hybrid genetic algorithm and intelligent search for job shop machining

    PubMed Central

    Salehi, Mojtaba

    2010-01-01

    Optimization of process planning is considered as the key technology for computer-aided process planning which is a rather complex and difficult procedure. A good process plan of a part is built up based on two elements: (1) the optimized sequence of the operations of the part; and (2) the optimized selection of the machine, cutting tool and Tool Access Direction (TAD) for each operation. In the present work, the process planning is divided into preliminary planning, and secondary/detailed planning. In the preliminary stage, based on the analysis of order and clustering constraints as a compulsive constraint aggregation in operation sequencing and using an intelligent searching strategy, the feasible sequences are generated. Then, in the detailed planning stage, using the genetic algorithm which prunes the initial feasible sequences, the optimized operation sequence and the optimized selection of the machine, cutting tool and TAD for each operation based on optimization constraints as an additive constraint aggregation are obtained. The main contribution of this work is the optimization of sequence of the operations of the part, and optimization of machine selection, cutting tool and TAD for each operation using the intelligent search and genetic algorithm simultaneously. PMID:21845020

  14. Mississippi Curriculum Framework for Machine Tool Operation/Machine Shop and Tool and Die Making Technology Cluster (Program CIP: 48.0507--Tool and Die Maker/Technologist) (Program CIP: 48.0503--Machine Shop Assistant). Postsecondary Programs.

    ERIC Educational Resources Information Center

    Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

    This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the machine tool operation/machine tool and tool and die making technology programs cluster. Presented in the introductory section are a framework of courses and programs, description of the…

  15. Stochastic flow shop scheduling of overlapping jobs on tandem machines in application to optimizing the US Army's deliberate nuclear, biological, and chemical decontamination process, (final report). Master's thesis

    SciTech Connect

    Novikov, V.

    1991-05-01

    The U.S. Army's detailed equipment decontamination process is a stochastic flow shop which has N independent non-identical jobs (vehicles) which have overlapping processing times. This flow shop consists of up to six non-identical machines (stations). With the exception of one station, the processing times of the jobs are random variables. Based on an analysis of the processing times, the jobs for the 56 Army heavy division companies were scheduled according to the best shortest expected processing time - longest expected processing time (SEPT-LEPT) sequence. To assist in this scheduling the Gap Comparison Heuristic was developed to select the best SEPT-LEPT schedule. This schedule was then used in balancing the detailed equipment decon line in order to find the best possible site configuration subject to several constraints. The detailed troop decon line, in which all jobs are independent and identically distributed, was then balanced. Lastly, an NBC decon optimization computer program was developed using the scheduling and line balancing results. This program serves as a prototype module for the ANBACIS automated NBC decision support system.... Decontamination, Stochastic flow shop, Scheduling, Stochastic scheduling, Minimization of the makespan, SEPT-LEPT Sequences, Flow shop line balancing, ANBACIS.

  16. 9. LOOKING NORTH ON SPRUCE STREET, SHOWING MILLWRIGHT SHOP, FITTING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. LOOKING NORTH ON SPRUCE STREET, SHOWING MILLWRIGHT SHOP, FITTING SHOP, ADMINISTRATION BUILDING AND ERECTING SHOP - UNION WORKS IN BACKGROUND. - Rogers Locomotive & Machine Works, Spruce & Market Streets, Paterson, Passaic County, NJ

  17. A new Nawaz-Enscore-Ham-based heuristic for permutation flow-shop problems with bicriteria of makespan and machine idle time

    NASA Astrophysics Data System (ADS)

    Liu, Weibo; Jin, Yan; Price, Mark

    2016-10-01

    A new heuristic based on the Nawaz-Enscore-Ham algorithm is proposed in this article for solving a permutation flow-shop scheduling problem. A new priority rule is proposed by accounting for the average, mean absolute deviation, skewness and kurtosis, in order to fully describe the distribution style of processing times. A new tie-breaking rule is also introduced for achieving effective job insertion with the objective of minimizing both makespan and machine idle time. Statistical tests illustrate better solution quality of the proposed algorithm compared to existing benchmark heuristics.

  18. Consumer Nutrition Environments of Hospitals: An Exploratory Analysis Using the Hospital Nutrition Environment Scan for Cafeterias, Vending Machines, and Gift Shops, 2012

    PubMed Central

    Sallis, James F.; Swartz, Michael D.; Hoelscher, Deanna M.; Peskin, Melissa F.

    2013-01-01

    Introduction Hospitals are the primary worksite of over 5 million adults in the United States, and millions of meals are procured and consumed in this setting. Because many worksite nutrition initiatives use an ecological framework to improve the dietary habits of employees, the nutrition values of foods served in hospitals is receiving attention. Methods This study used the Hospital Nutrition Environment Scan for Cafeterias, Vending Machines, and Gift Shops to quantitatively describe the consumer nutrition environments of 39 hospitals in Southern California. Data were collected by visiting each facility once from February 2012 through May 2012. Results On average, hospitals achieved only 29%, 33%, and less than 1% of the total possible points for their cafeteria, vending machines, and gift shops sections, respectively; overall, hospitals scored 25% of the total possible points. Large facility size and contracted food service operations were associated with some healthy practices in hospital cafeterias, but we found no association between these variables and the sectional or overall nutrition composite scores. Conclusion The average consumer nutrition environment of hospitals in this sample was minimally conducive to healthful eating. Nutrition-related interventions are warranted in hospital settings. PMID:23823699

  19. 1. AERIAL VIEW OF SHOPS COMPLEX LOOKING EAST SHOWING WEST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. AERIAL VIEW OF SHOPS COMPLEX LOOKING EAST SHOWING WEST AND EAST ROUNDHOUSES, FROG AND SWITCH SHOP, AND MACHINE SHOP. - Baltimore & Ohio Railroad, Martinsburg Repair Shops, West Side of Tuscarora Creek Opposite East End of Race Street, Martinsburg, Berkeley County, WV

  20. 26. MOORSE DRILL CABINET AND FORK ART FABRICATED AT SHOP ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. MOORSE DRILL CABINET AND FORK ART FABRICATED AT SHOP (L TO R)- LOOKING SOUTHEAST. - W. A. Young & Sons Foundry & Machine Shop, On Water Street along Monongahela River, Rices Landing, Greene County, PA

  1. View looking southeast to the Erecting Shop on the corner ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View looking southeast to the Erecting Shop on the corner of Spruce Street and Market Street (similar to HAER No. NJ-3-A-2) - Rogers Locomotive & Machine Works, Erecting Shop, Spruce & Market Streets, Paterson, Passaic County, NJ

  2. View of Boiler from west, Steam Engine for shop line ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of Boiler from west, Steam Engine for shop line shaft in foreground - East Broad Top Railroad & Coal Company, Machine Shop, State Route 994, West of U.S. Route 522, Rockhill Furnace, Huntingdon County, PA

  3. 100. COBBLER SHOP AFT LOOKING FORWARD VISIBLE ARE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    100. COBBLER SHOP - AFT LOOKING FORWARD - VISIBLE ARE THE FINISHING MACHINE, DAVIS STITCHING MACHINE, SINGER SEWING MACHINE FROM TAILOR SHOP, STORAGE SHELVES, WORK BENCH AND SHOE TREE STAND. - U.S.S. HORNET, Puget Sound Naval Shipyard, Sinclair Inlet, Bremerton, Kitsap County, WA

  4. 7. South wall of blacksmith shop section of roundhouse at ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. South wall of blacksmith shop section of roundhouse at left. West wall and south end wall of machine shop section of roundhouse at right. View to northeast. - Duluth & Iron Range Rail Road Company Shops, Roundhouse, Southwest of downtown Two Harbors, northwest of Agate Bay, Two Harbors, Lake County, MN

  5. 3. OVERALL VIEW OF UTILITY AREA, TO NORTH (CARPENTER SHOP ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. OVERALL VIEW OF UTILITY AREA, TO NORTH (CARPENTER SHOP IS FIRST BUILDING ON LEFT; EQUIPMENT SHOP IS BEHIND TRUCKS TO LEFT; MACHINE SHOP IS AT CENTER BACK; WAREHOUSE IS THIRD BUILDING FROM FRONT ON THE RIGHT; FIREHOUSE IS SECOND BUILDING FROM FRONT ON THE RIGHT) - Oak Creek Historic Complex, Springdale, Washington County, UT

  6. 14. BLACKSMITH SHOP IN THE CENTER OF PHOTOGRAPH. TO THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. BLACKSMITH SHOP IN THE CENTER OF PHOTOGRAPH. TO THE LEFT IS MACHINE SHOP No. 1, AND TO THE RIGHT IS THE CHIPPING YARD. THE RUINS IN THE FOREGROUND IS THE FORMER ELECTRIC DEPARTMENT. Jet Lowe, Photographer, 1989. - U.S. Steel Homestead Works, Auxiliary Buildings & Shops, Along Monongahela River, Homestead, Allegheny County, PA

  7. Albuquerque Operations Office, Albuquerque, New Mexico: Technology summary

    SciTech Connect

    Not Available

    1994-08-01

    This document has been prepared by the Department of Energy`s (DOE) Environmental Management (EM) Office of Technology Development (OTD) in order to highlight research, development, demonstration, testing, and evaluation (RDDT&E) activities funded through the Albuquerque Operations Office. Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. The information has been assembled from recently produced OTD documents that highlight technology development activities within each of the OTD program elements. These integrated program summaries include: Volatile Organic Compounds in Non-Arid Soils, Volatile Organic Compounds in Arid Soils, Mixed Waste Landfill Integrated Demonstration, Uranium in Soils Integrated Demonstration, Characterization, Monitoring, and Sensor Technology, In Situ Remediation, Buried Waste Integrated Demonstration, Underground Storage Tank, Efficient Separations and Processing, Mixed Waste Integrated Program, Rocky Flats Compliance Program, Pollution Prevention Program, Innovation Investment Area, and Robotics Technology.

  8. Doctor shopping.

    PubMed

    Klienschmidt, R; Price, J; Caught, K

    1995-06-01

    Many patients attending a drug and alcohol treatment service reported doctor shopping for benzodiazepines as "all too easy". How, we asked, could this activity be recognised and countered? This paper describes this activity and the attitude of some of the doctors affected by it.

  9. SOUTH AND WEST FACADES OF MACHINE AND MINE CAR REPAIR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    SOUTH AND WEST FACADES OF MACHINE AND MINE CAR REPAIR SHOP, LOOKING NORTHEAST. (THE ONE-STORY STONE BUILDING TO THE RIGHT IS A SUPPLY HOUSE.) - Loyal Hanna Coal & Coke Company, Machine Shop, Cairnbrook, Somerset County, PA

  10. View of west elevation of building 18 section of machine ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of west elevation of building 18 section of machine shops. Jet Lowe, Haer staff photographer, summer 1995. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Machine Shops, League Island, Philadelphia, Philadelphia County, PA

  11. 14. Machine in north 1922 section of Building 59. Machine ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. Machine in north 1922 section of Building 59. Machine is 24' Jointer made by Oliver Machinery Co. Camera pointed E. - Puget Sound Naval Shipyard, Pattern Shop, Farragut Avenue, Bremerton, Kitsap County, WA

  12. Monel Machining

    NASA Technical Reports Server (NTRS)

    1983-01-01

    Castle Industries, Inc. is a small machine shop manufacturing replacement plumbing repair parts, such as faucet, tub and ballcock seats. Therese Castley, president of Castle decided to introduce Monel because it offered a chance to improve competitiveness and expand the product line. Before expanding, Castley sought NERAC assistance on Monel technology. NERAC (New England Research Application Center) provided an information package which proved very helpful. The NASA database was included in NERAC's search and yielded a wealth of information on machining Monel.

  13. Wacky Machines

    ERIC Educational Resources Information Center

    Fendrich, Jean

    2002-01-01

    Collectors everywhere know that local antique shops and flea markets are treasure troves just waiting to be plundered. Science teachers might take a hint from these hobbyists, for the next community yard sale might be a repository of old, quirky items that are just the things to get students thinking about simple machines. By introducing some…

  14. AUTOMOTIVE REPAIR SHOP, INTERIOR VIEW TO SOUTHEAST, DOORWAYS TO SHOP ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AUTOMOTIVE REPAIR SHOP, INTERIOR VIEW TO SOUTHEAST, DOORWAYS TO SHOP OFFICE AND SOUTH WING, WITH SCALE. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

  15. AUTOMOTIVE REPAIR SHOP, INTERIOR VIEW TO SOUTHEAST, DOORWAYS TO SHOP ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AUTOMOTIVE REPAIR SHOP, INTERIOR VIEW TO SOUTHEAST, DOORWAYS TO SHOP OFFICE AND SOUTH WING. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

  16. 77 FR 20690 - Environmental Impact Statement: Albuquerque, New Mexico

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-05

    ... TRANSPORTATION Federal Highway Administration Environmental Impact Statement: Albuquerque, New Mexico AGENCY... the Interstate 25 and Paseo del Norte Interchange in Albuquerque, New Mexico. FOR FURTHER INFORMATION CONTACT: Greg Heitmann, Environmental Specialist, Federal Highway Administration, New Mexico...

  17. Interior of shop, showing the reheat furnaces; the vehicle in ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior of shop, showing the reheat furnaces; the vehicle in the center is a charging machine the operator of which manipulates steel ingots in the furnace, as well as in the adjacent forging hammers - Bethlehem Steel Corporation, South Bethlehem Works, Tool Steel-Electric Furnace Shop, Along Lehigh River, North of Fourth Street, West of Minsi Trail Bridge, Bethlehem, Northampton County, PA

  18. 44. Cross section of the Blacksmith Shop from Construction Drawing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    44. Cross section of the Blacksmith Shop from Construction Drawing 2042-F-15, entitled Machine and Blacksmith Shop; Plan, Elevations, and Sections. (Original drawing, in the possession of Wyre Dick and Company, Livingston, New Jersey.) - Central Railroad of New Jersey, Engine Terminal, Jersey City, Hudson County, NJ

  19. View northwest of building 19 area used for pattern shop ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View northwest of building 19 area used for pattern shop storage (foreground), building 17 section of structure on left. This structure consists of two formerly separate buildings. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Machine Shops, League Island, Philadelphia, Philadelphia County, PA

  20. Escape from Albuquerque: An Apache Memorate.

    ERIC Educational Resources Information Center

    Greenfeld, Philip J.

    2001-01-01

    Clarence Hawkins, a White Mountain Apache, escaped from the Albuquerque Indian School around 1920. His 300-mile trip home, made with two other boys, exemplifies the reaction of many Indian youths to the American government's plans for cultural assimilation. The tale is told in the form of traditional Apache narrative. (TD)

  1. OVERALL VIEW OF SOUTHERN DUCTILE'S PATTERN REPAIR SHOP, SHOWING A ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    OVERALL VIEW OF SOUTHERN DUCTILE'S PATTERN REPAIR SHOP, SHOWING A SPANISH-MADE FORADIA BORING MACHINE IN THE FOREGROUND. - Southern Ductile Casting Company, Mold Making, 2217 Carolina Avenue, Bessemer, Jefferson County, AL

  2. Looking Northeast at Southwest End of Maintenance Shop with Milling ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Looking Northeast at Southwest End of Maintenance Shop with Milling Machines, Hoist, Electrical Boxes in Recycle Recovery Building - Hematite Fuel Fabrication Facility, Recycle Recovery Building, 3300 State Road P, Festus, Jefferson County, MO

  3. Learn & Shop: Teaching Composition in Shopping Centers.

    ERIC Educational Resources Information Center

    East, James R.; Strahl, Ronald

    1982-01-01

    Describes a learn and shop program conducted by Indiana University-Purdue University at Indianapolis in various shopping malls around the city. Discusses how the atmosphere of composition courses held off campus influences students' attitudes toward writing and college-level work. (HTH)

  4. 6. VIEW OF MILLING MACHINE NO. 3A HEAVY. Brown and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. VIEW OF MILLING MACHINE NO. 3A HEAVY. Brown and Sharpe Mfg. Company (Robert Beck), Providence, Rhode Island. Conrail No. 00020. - Juniata Shops, Machine Shop No. 1, East of Fourth Avenue at Third Street, Altoona, Blair County, PA

  5. Flexible Job-Shop Scheduling Problem by Genetic Algorithm

    NASA Astrophysics Data System (ADS)

    Ida, Kenichi; Oka, Kensaku

    Flexible Job-shop Scheduling Problem is expansion of the traditional Job-shop Scheduling Problem that an operation can be processed one or more machines. The purpose of this problem is to look for the smallest makespan. For that purpose, it is necessary to decide optimal assignment of machines to operations and order of operations on machines. In this paper, we focus on maximum of workloads for all machines and propose new suvival selection, creation method of initial solution, mutation, and escape method to Genetic Algorithm for this problem. The efficacy of our method is demonstrated by comparing its numerical experiment results with another methods.

  6. Forecasting of indirect consumables for a Job Shop

    NASA Astrophysics Data System (ADS)

    Shakeel, M.; Khan, S.; Khan, W. A.

    2016-08-01

    A job shop has an arrangement where similar machines (Direct consumables) are grouped together and use indirect consumables to produce a product. The indirect consumables include hack saw blades, emery paper, painting brush etc. The job shop is serving various orders at a particular time for the optimal operation of job shop. Forecasting is required to predict the demand of direct and indirect consumables in a job shop. Forecasting is also needed to manage lead time, optimize inventory cost and stock outs. The objective of this research is to obtain the forecast for indirect consumables. The paper shows how job shop can manage their indirect consumables more accurately by establishing a new technique of forecasting. This results in profitable use of job shop by multiple users.

  7. Machining of uranium and uranium alloys

    SciTech Connect

    Morris, T.O.

    1981-12-14

    Uranium and uranium alloys can be readily machined by conventional methods in the standard machine shop when proper safety and operating techniques are used. Material properties that affect machining processes and recommended machining parameters are discussed. Safety procedures and precautions necessary in machining uranium and uranium alloys are also covered. 30 figures.

  8. Tiger Team assessment of the Sandia National Laboratories, Albuquerque

    SciTech Connect

    Not Available

    1991-05-01

    This report documents the Tiger Team Assessment of Sandia National Laboratories (SNL), Albuquerque, located in Albuquerque, New Mexico. SNL, Albuquerque, is operated by the Sandia Corporation (a wholly owned subsidiary of the American Telephone and Telegraph Company) for the US Department of Energy (DOE). The environmental assessment also included DOE tenant facilities at Ross Aviation, Albuquerque Microelectronics Operation, and the Central Training Academy. The assessment was conducted from April 15 to May 24, 1991, under the auspices of DOE's Office of Special Projects under the Assistant Secretary for Environment, Safety and Health (ES H). The assessment was comprehensive, encompassing ES H disciplines, management, self-assessments, and quality assurance; transportation; and waste management operations. Compliance with applicable federal, state, and local regulations; applicable DOE Orders; best management practices; and internal SNL, Albuquerque, requirements were assessed. In addition, an evaluation of the adequacy and effectiveness of DOE and SNL, Albuquerque management of ES H programs was conducted.

  9. Albuquerque Seismological Laboratory--50 years of global seismology

    USGS Publications Warehouse

    Hutt, C.R.; Peterson, Jon; Gee, Lind; Derr, John; Ringler, Adam; Wilson, David

    2011-01-01

    The U.S. Geological Survey Albuquerque Seismological Laboratory is about 15 miles southeast of Albuquerque on the Pueblo of Isleta, adjacent to Kirtland Air Force Base. The Albuquerque Seismological Laboratory supports the Global Seismographic Network Program and the Advanced National Seismic System through the installation, operation, and maintenance of seismic stations around the world and serves as the premier seismological instrumentation test facility for the U.S. Government.

  10. 26. July 1974. BENCH SHOP, VIEW LOOKING SOUTH, SHOWING THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. July 1974. BENCH SHOP, VIEW LOOKING SOUTH, SHOWING THE BORING MACHINE PURCHASED IN 1885. THE BIT MAY BE LOWERED BY THE HANGING LINKAGE OR THE TABLE RAISED BY THE FOOT PEDAL. NOTICE THE CHASE FOR THE BELTS, BUILT NO LESS CAREFULLY THAN THE MACHINE ITSELF. - Gruber Wagon Works, Pennsylvania Route 183 & State Hill Road at Red Bridge Park, Bernville, Berks County, PA

  11. The Albuquerque High School Moonwatch Team

    NASA Astrophysics Data System (ADS)

    Weisberg, Joel M.

    2007-12-01

    In the mid-1950s, a remarkable pair of high school teachers, Mrs. Vi Hefferan and (later) Mr. John Bartholdi, organized an astronomy club and Moonwatch satellite tracking team open to students from all Albuquerque high schools. The Albuquerque team distinguished itself as one of the best in the worldwide network. Among other tasks, they found some satellites that had been "lost" by professional trackers. The team provided a variety of interesting and exciting activities for science-interested students from the whole city. Among the most meaningful was the ability to make observations that were scientifically useful. By 1966 when I joined as a 10th grader, the excitement of the early days was gone but the sense of participation in a large and fascinating enterprise was still keen. I will discuss the techniques and technologies used to track satellites from the high school and from my front yard, including slide rules, rulers, telegrams, special delivery mail, short-wave radio time signals, tape recorders, stop watches, star maps, computers, and a five-inch rich-field "apogee" refractor. After a year of intense effort at satellite tracking for Moonwatch, I had the opportunity to visit a then-secret 48-inch Air Force satellite tracking telescope in southern NM in 1968. This event demonstrated the obsolescence of the amateur (though not amateurish!) techniques that we had been using and provided a fitting end to my participation as I left for college.

  12. Report Card. Learn & Shop.

    ERIC Educational Resources Information Center

    Indiana Univ.-Purdue Univ., Indianapolis.

    The Indiana University-Purdue University at Indianapolis'"Learn & Shop" program, which offers regular college credit courses in convenient shopping centers, is discussed. In addition to providing information on students, books and libraries, curriculum, and classes, consideration is given to advantages for students, retailers, and the school. Also…

  13. Shopping. Teaching Guide.

    ERIC Educational Resources Information Center

    Florida Univ., Gainesville. Florida Cooperative Extension Service.

    One in a series of consumer education materials for 4-H Club members and secondary students, this document focuses on shopping and purchasing. The series is based on the philosophy that teens need the training and guidance to develop the skills needed to become competent consumers. The shopping project is designed to acquaint students with some of…

  14. 8. VIEW OF COMBINATION GEAR HOBBING MACHINE (Gould & Eberhardt, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. VIEW OF COMBINATION GEAR HOBBING MACHINE (Gould & Eberhardt, Newark, New Jersey. Patented No. 2103) AND LATHE (W.E. Shipley Machiner Co. Metal Working Machinery, Philadelphia, Pennsylvania, 1913). - Juniata Shops, Machine Shop No. 1, East of Fourth Avenue at Third Street, Altoona, Blair County, PA

  15. 4. VIEW OF VERTICAL BORING MACHINE. (Bullard) Vertical turning lathe ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. VIEW OF VERTICAL BORING MACHINE. (Bullard) Vertical turning lathe (VTL). Machining the fixture for GE Turboshroud. G.S. O'Brien, operator. - Juniata Shops, Machine Shop No. 1, East of Fourth Avenue at Third Street, Altoona, Blair County, PA

  16. 18. Photocopy of architectural drawing (from Albuquerque Area Indian Health ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. Photocopy of architectural drawing (from Albuquerque Area Indian Health Service, Division of Health Facilities, Albuquerque, New Mexico) Mayers, Murray, and Phillip, Architects, New York, NY, 1934 Detail sheet - Taos Indian Health Center, 0.3 mile south-southwest of Pueblos Plaza, Taos Pueblo, Taos County, NM

  17. 14. Photocopy of architectural drawing (from Albuquerque Area Indian Health ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. Photocopy of architectural drawing (from Albuquerque Area Indian Health Service, Division of Health Facilities, Albuquerque, New Mexico) Mayers, Murray, and Phillip, Architects, New York, N&, 1934 Foundation Plan - Taos Indian Health Center, 0.3 mile south-southwest of Pueblos Plaza, Taos Pueblo, Taos County, NM

  18. 16 Photocopy of architectural drawing (from Albuquerque Area Indian Health ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16 Photocopy of architectural drawing (from Albuquerque Area Indian Health Service, Division of Health Facilities, Albuquerque, New Mexico) Mayers Murray, and Phillip, Architects, New York, NY, 1934 first floor mechanical plan - heating - Taos Indian Health Center, 0.3 mile south-southwest of Pueblos Plaza, Taos Pueblo, Taos County, NM

  19. 15. Photocopy of architectural drawing (from Albuquerque Area Indian Health ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. Photocopy of architectural drawing (from Albuquerque Area Indian Health Service, Division of Health Facilities, Albuquerque, New Mexico) Mayers, Murray, and Phillip, Architects, New York, NY, 1934 First Floor - plumbing - Taos Indian Health Center, 0.3 mile south-southwest of Pueblos Plaza, Taos Pueblo, Taos County, NM

  20. 17. Photocopy of architectural drawing (from Albuquerque Area Indian Health ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. Photocopy of architectural drawing (from Albuquerque Area Indian Health Service, Division of Health Facilities, Albuquerque, New Mexico) Mayers, Murray, and Phillip, Architects, New York, NY, 1934 Elevations - Taos Indian Health Center, 0.3 mile south-southwest of Pueblos Plaza, Taos Pueblo, Taos County, NM

  1. The Albuquerque City Center Schools. Program Evaluation, 1984-85.

    ERIC Educational Resources Information Center

    Johns, Jennifer S.; Panofsky, Carolyn

    The Albuquerque City Center Schools (ACCS) project, begun in 1983, was designed to increase the effectiveness of 12 schools in the Albuquerque High School cluster by creating a climate of high expectations, improving academic achievement, encouraging a climate of positive discipline, promoting student, community and private sector participation,…

  2. Ground-water monitoring in the Albuquerque area

    USGS Publications Warehouse

    Thorn, Condé R.

    1996-01-01

    At present (1996), all drinking water for Albuquerque residents comes from ground-water reserves. The Albuquerque area is the largest population center in the State and the largest consumer of ground water. Recent reports concerning the water resources of the Albuquerque area suggest that the Albuquerque Basin may soon face serious water-availability and water-quality problems due to anticipated ground-water development. Recent studies completed by the U.S. Geological Survey (USGS) have improved the understanding of the ground-water resources in the Albuquerque Basin. These studies have indicated that the more permeable units within the aquifer system--the upper Santa Fe Group--are less extensive than previously thought, and that water-levels have declined as much as 160 feet.

  3. 1989 Environmental monitoring report, Sandia National Laboratories, Albuquerque, New Mexico

    SciTech Connect

    Hwang, S.; Chavez, G.; Phelan, J.; Parsons, A.; Yeager, G.; Dionne, D.; Schwartz, B.; Wolff, T.; Fish, J.; Gray, C.; Thompson, D.

    1990-05-01

    This 1989 report contains monitoring data from routine radiological and nonradiological environmental surveillance activities. Summaries of significant environmental compliance programs in progress such as National Environmental Policy Act documentation, environmental permits, environmental restoration, and various waste management programs for Sandia National Laboratories in Albuquerque (SNL, Albuquerque) are included. The maximum offsite dose impact was calculated to be 8.8 {times} 10{sup {minus}4} mrem. The total Albuquerque population received a collective dose of 0.097 person-rem during 1989 from SNL, Albuquerque, operations. As in the previous year, SNL, Albuquerque, operations in 1989 had no adverse impact on the general public or on the environment. 46 refs., 20 figs., 31 tabs.

  4. 1991 Environmental monitoring report Sandia National Laboratories, Albuquerque, New Mexico

    SciTech Connect

    Culp, T.; Cox, W.; Hwang, S.; Jones, A.; Longley, S.; Parsons, A.; Wolff, T.; Fish, J.; Ward, S.

    1992-11-01

    This 1991 report contains monitoring data from routine radiological and nonradiological environmental surveillance activities. Summaries of significant environmental compliance programs in progress such as National Environmental Policy Act (NEPA) documentation, environmental permits, environmental restoration (ER), and various waste management programs for Sandia National Laboratories in Albuquerque (SNL, Albuquerque) are included. The maximum offsite dose impact was calculated to be 1.3 {times} 10{sup {minus}3} mrem. The total population within a 50-mile radius of SNL, Albuquerque, received a collective dose of 0.53 person-rem during 1991 from SNL, Albuquerque, operations. As in the previous year, the 1991 operations at SNL, Albuquerque, had no discernible impact on the general public or on the environment.

  5. Mercury Shopping Cart Interface

    NASA Technical Reports Server (NTRS)

    Pfister, Robin; McMahon, Joe

    2006-01-01

    Mercury Shopping Cart Interface (MSCI) is a reusable component of the Power User Interface 5.0 (PUI) program described in another article. MSCI is a means of encapsulating the logic and information needed to describe an orderable item consistent with Mercury Shopping Cart service protocol. Designed to be used with Web-browser software, MSCI generates Hypertext Markup Language (HTML) pages on which ordering information can be entered. MSCI comprises two types of Practical Extraction and Report Language (PERL) modules: template modules and shopping-cart logic modules. Template modules generate HTML pages for entering the required ordering details and enable submission of the order via a Hypertext Transfer Protocol (HTTP) post. Shopping cart modules encapsulate the logic and data needed to describe an individual orderable item to the Mercury Shopping Cart service. These modules evaluate information entered by the user to determine whether it is sufficient for the Shopping Cart service to process the order. Once an order has been passed from MSCI to a deployed Mercury Shopping Cart server, there is no further interaction with the user.

  6. Machine Shop. Module 7: Grinders. Instructor's Guide.

    ERIC Educational Resources Information Center

    Nobles, Jack; Gage, Mel

    This document consists of materials for an eight-unit course on the following topics: (1) grinder safety and types of grinders; (2) surface grinder accessories and equipment maintenance; (3) surface grinder preparation and set-up; (4) surface grinding flat and angular surfaces; (5) cylindrical grinding; (6) tool and cutter safety; (7) tool and…

  7. Machine Shop. Module 5: Lathes. Instructor's Guide.

    ERIC Educational Resources Information Center

    Nobles, Jack

    This document consists of materials for a 10-unit course on the following topics: (1) types and parts of lathes; (2) lathe accessories, maintenance, and safety; (3) lathe operations and tooling; (4) lathe calculations; (5) lathe taper and thread applications; (6) planning considerations; (7) cutting fluids, lathe center alignment, and lathe gaps;…

  8. An Educational Shopping Center

    ERIC Educational Resources Information Center

    De Bernardis, Amo

    1970-01-01

    A comparison is made between the Portland Community College (Oregon) physical plant and a shopping center. The college planners have arranged the facilities to provide useful, practical, and effective educational opportunities for all of the students. (BB)

  9. Space Odyssey Gift Shop

    NASA Technical Reports Server (NTRS)

    2000-01-01

    The Space Odyssey Gift Shop located in StenniSphere at the John C. Stennis Space Center in Hancock County, Miss., offers every visitor the opportunity to go home with 'the right stuff' from his or her StenniSphere visit. The gift shop is located just inside the front doors to StenniSphere and offers a wide range of space-related apparel, memorabilia, toys, books, mission patches and more.

  10. Scheduling job shop - A case study

    NASA Astrophysics Data System (ADS)

    Abas, M.; Abbas, A.; Khan, W. A.

    2016-08-01

    The scheduling in job shop is important for efficient utilization of machines in the manufacturing industry. There are number of algorithms available for scheduling of jobs which depend on machines tools, indirect consumables and jobs which are to be processed. In this paper a case study is presented for scheduling of jobs when parts are treated on available machines. Through time and motion study setup time and operation time are measured as total processing time for variety of products having different manufacturing processes. Based on due dates different level of priority are assigned to the jobs and the jobs are scheduled on the basis of priority. In view of the measured processing time, the times for processing of some new jobs are estimated and for efficient utilization of the machines available an algorithm is proposed and validated.

  11. Predicting wood pellet stove ownership and acquisition in Albuquerque, NM

    SciTech Connect

    Lansford, R.; Skaggs, R.; Owensby, F.

    1994-12-31

    Wood pellet stove (WPS) ownership and acquisition in Albuquerque, New Mexico was predicted using a model of qualitative choice. Using data obtained from a telephone survey, households were divided into four groups: current WPS owners, non-owners considering ownership, non-owners not considering ownership, and those who had not heard of WPS technology. Variables used to predict what category a household will be in include homeowners` socioeconomic and home-heating characteristics. Results indicate few WPS stoves are currently in use in Albuquerque. However, current WPS owners and those considering WPS acquisition tend to have higher incomes, more years of education, larger homes, and use their fireplaces more frequently than average. Clean air regulations in Albuquerque will require changes in home woodburning. The WPS is an efficient and clean device; however, lack of knowledge of WPS technology, satisfaction with current heating systems, and limited awareness of the potential impact of clean air regulations indicate WPS usage in Albuquerque will remain limited.

  12. Flooding and conservation in the Albuquerque bosque

    SciTech Connect

    Crawford, C.S.; Molles, M.C. Jr.; Valett, H.M.

    1995-12-31

    Interest in the conservation of the Middle Rio Grande bosque has grown rapidly in the last decade. During that period, private organizations as well as governmental agencies have sharpened their focus on the issue, and in doing so have contributed to the development of a bosque biological management plan for the river reach between Cochiti Dam and Elephant Butte Reservoir. This increased regional attention reflects a growing national and international concern about human impacts on fluvial processes in large floodplain rivers. Because they impound large amounts of a river`s discharge and interfere with its natural flooding regime, dams can seriously disrupt the relationship between river basin hydrology and riparian zone functioning. In western North America, this interference reduces cottonwood germination and survival and, as will be discussed, negatively affects key ecological processes in riparian communities. In this paper the authors first review how the decoupling of basin hydrology from riparian forest processes has begun to affect the integrity of the Middle Rio Grande bosque ecosystem. Then they propose an alternative management scheme, with emphasis on the Albuquerque bosque, that centers on restoring its ecosystem functioning.

  13. Eyes Wide Shopped: Shopping Situations Trigger Arousal in Impulsive Buyers

    PubMed Central

    Serfas, Benjamin G.; Büttner, Oliver B.; Florack, Arnd

    2014-01-01

    The present study proposes arousal as an important mechanism driving buying impulsiveness. We examined the effect of buying impulsiveness on arousal in non-shopping and shopping contexts. In an eye-tracking experiment, we measured pupil dilation while participants viewed and rated pictures of shopping scenes and non-shopping scenes. The results demonstrated that buying impulsiveness is closely associated with arousal as response to viewing pictures of shopping scenes. This pertained for hedonic shopping situations as well as for utilitarian shopping situations. Importantly, the effect did not emerge for non-shopping scenes. Furthermore, we demonstrated that arousal of impulsive buyers is independent from cognitive evaluation of scenes in the pictures. PMID:25489955

  14. 13. TOOL ROOM SHOWING W. ROBERTSON MACHINE & FOUNDRY CO. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. TOOL ROOM SHOWING W. ROBERTSON MACHINE & FOUNDRY CO. NO. 5 POWER HACKSAW (FOREGROUND) AND WELLS METAL BAND SAW (BACKGROUND). VIEW SOUTHEAST - Oldman Boiler Works, Office/Machine Shop, 32 Illinois Street, Buffalo, Erie County, NY

  15. 46. OFFICE INTERIOR FULL OF MACHINE PARTS, PAMPHLETS, AND ADVERTISEMENTS, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    46. OFFICE INTERIOR FULL OF MACHINE PARTS, PAMPHLETS, AND ADVERTISEMENTS, HARDWARE STORED IN SHELVES ALONG STUD WALLS-LOOKING WEST. - W. A. Young & Sons Foundry & Machine Shop, On Water Street along Monongahela River, Rices Landing, Greene County, PA

  16. 14. PIPE MACHINE, WORK BENCH, SCALE, RADIAL DRILL AND STOVE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. PIPE MACHINE, WORK BENCH, SCALE, RADIAL DRILL AND STOVE (L TO R) LOOKING WEST. - W. A. Young & Sons Foundry & Machine Shop, On Water Street along Monongahela River, Rices Landing, Greene County, PA

  17. View from southeast of engine lathe (Lodge and Shippley Machine ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View from southeast of engine lathe (Lodge and Shippley Machine Tools, Cincinnati, Ohio) - East Broad Top Railroad & Coal Company, Machine Shop, State Route 994, West of U.S. Route 522, Rockhill Furnace, Huntingdon County, PA

  18. Overall interior view of structures shop (11 shop) located on ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Overall interior view of structures shop (11 shop) located on west side of building 57 - looking north; the south end of the structures shop was devoted to welding heavy plate foundations and ship components; the floor is fabricated of case steel and features a grillwork of 1 1/2 fabricated holes which are used as sockets for gripping position pins. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Structure Shop, League Island, Philadelphia, Philadelphia County, PA

  19. Efficient Genetic Algorithm for Flexible Job-Shop Scheduling Problem Using Minimise Makespan

    NASA Astrophysics Data System (ADS)

    Farashahi, Hamid Ghaani; Baharudin, B. T. H. T.; Shojaeipour, Shahed; Jaberi, Mohammad

    The aim of this paper is to minimise the makespan. The flexible job-shop scheduling is very common in practice and parallel machine is used in job-shop environment as flexibility. These flexibilities could be used for increasing the throughput rate, avoiding the production stop, removing bottleneck problems and finally achieving competitive advantages in economical environments. In opposition to classic job-shop where there is one machine in each stage, in this problem production system consists of multistage which in each stage there are one or several parallel machines with different speeds. The flexible job-shop scheduling with parallel machines problem consists of two sub-problems for solving: assigning and sequencing sub-problem.

  20. Interior of girder shop, from older section of shop showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior of girder shop, from older section of shop showing older (1880's) construction of roof trusses. Compare with earlier views in this series. - Phoenix Iron Company, Girder Shop No. 6, North of French Creek, west of Gay Street, Phoenixville, Chester County, PA

  1. The Shopping Center. Intermediate.

    ERIC Educational Resources Information Center

    Timmons, Darrell; And Others

    This teaching guide is designed to develop thinking skills of intermediate elementary school children by using the concept of a shopping center. Thinking skills defined in the guide are observing, recalling, noticing differences and similarities, ordering, grouping, concept labeling, classifying, concept testing, inferring causes and effects,…

  2. Shopping Mall 101.

    ERIC Educational Resources Information Center

    Canny, Marie C.

    1996-01-01

    An alternative high school program operates at a shopping center in Northern Virginia. Landmark Career Academy is a partnership between the Fairfax County Schools, a private organization that helps fund school-to-work programs, and Landmark Mall. So far, academy students are earning better grades than they did in their traditional high school…

  3. One-stop shopping.

    PubMed

    Snow, C

    1996-11-25

    The long-term-care industry's new mantras are "continuum of care" and "one-stop shopping." Companies are trying to please consumers who are clamoring for more senior-living options and managed-care organizations that want administratively simple contracting arrangements.

  4. The Micro-Shop.

    ERIC Educational Resources Information Center

    Steele, Barbara

    1992-01-01

    To reduce teacher isolation and encourage sharing of expertise, schools should consider brief workshops or 15-minute "micro-shops" on various topics ranging from making electrical circuit boards to setting up a salt-water aquarium. This article and accompanying sidebar discuss benefits and set-up strategies. (MLH)

  5. The Albuquerque Seismological Laboratory Data Quality Analyzer

    NASA Astrophysics Data System (ADS)

    Ringler, A. T.; Hagerty, M.; Holland, J.; Gee, L. S.; Wilson, D.

    2013-12-01

    The U.S. Geological Survey's Albuquerque Seismological Laboratory (ASL) has several efforts underway to improve data quality at its stations. The Data Quality Analyzer (DQA) is one such development. The DQA is designed to characterize station data quality in a quantitative and automated manner. Station quality is based on the evaluation of various metrics, such as timing quality, noise levels, sensor coherence, and so on. These metrics are aggregated into a measurable grade for each station. The DQA consists of a website, a metric calculator (Seedscan), and a PostgreSQL database. The website allows the user to make requests for various time periods, review specific networks and stations, adjust weighting of the station's grade, and plot metrics as a function of time. The website dynamically loads all station data from a PostgreSQL database. The database is central to the application; it acts as a hub where metric values and limited station descriptions are stored. Data is stored at the level of one sensor's channel per day. The database is populated by Seedscan. Seedscan reads and processes miniSEED data, to generate metric values. Seedscan, written in Java, compares hashes of metadata and data to detect changes and perform subsequent recalculations. This ensures that the metric values are up to date and accurate. Seedscan can be run in a scheduled task or on demand by way of a config file. It will compute metrics specified in its configuration file. While many metrics are currently in development, some are completed and being actively used. These include: availability, timing quality, gap count, deviation from the New Low Noise Model, deviation from a station's noise baseline, inter-sensor coherence, and data-synthetic fits. In all, 20 metrics are planned, but any number could be added. ASL is actively using the DQA on a daily basis for station diagnostics and evaluation. As Seedscan is scheduled to run every night, data quality analysts are able to then use the

  6. 1990 Environmental Monitoring Report, Sandia National Laboratories, Albuquerque, New Mexico

    SciTech Connect

    Hwang, S.; Yeager, G.; Wolff, T.; Parsons, A.; Dionne, D.; Massey, C.; Schwartz, B.; Fish, J.; Thompson, D. ); Goodrich, M. )

    1991-05-01

    This 1990 report contains monitoring data from routine radiological and nonradiological environmental surveillance activities. Summaries of significant environmental compliance programs in progress such as National Environmental Policy Act (NEPA) documentation, environmental permits, environmental restoration, and various waste management programs for Sandia National Laboratories in Albuquerque (SNL, Albuquerque) are included. The maximum offsite dose impact was calculated to be 2.0 {times} 10{sup {minus}3} mrem. The total 50-mile population received a collective dose of 0.82 person-rem during 1990 from SNL, Albuquerque, operations. As in the previous year, the 1990 SNL operations had no adverse impact on the general public or on the environment. This report is prepared for the US Department of Energy in compliance with DOE Order 5400.1. 97 refs., 30 figs., 137 tabs.

  7. Aesthetic quality inference for online fashion shopping

    NASA Astrophysics Data System (ADS)

    Chen, Ming; Allebach, Jan

    2014-03-01

    On-line fashion communities in which participants post photos of personal fashion items for viewing and possible purchase by others are becoming increasingly popular. Generally, these photos are taken by individuals who have no training in photography with low-cost mobile phone cameras. It is desired that photos of the products have high aesthetic quality to improve the users' online shopping experience. In this work, we design features for aesthetic quality inference in the context of online fashion shopping. Psychophysical experiments are conducted to construct a database of the photos' aesthetic evaluation, specifically for photos from an online fashion shopping website. We then extract both generic low-level features and high-level image attributes to represent the aesthetic quality. Using a support vector machine framework, we train a predictor of the aesthetic quality rating based on the feature vector. Experimental results validate the efficacy of our approach. Metadata such as the product type are also used to further improve the result.

  8. 1995 Site environmental report Sandia National Laboratories, Albuquerque, New Mexico

    SciTech Connect

    Shyr, L.J.; Duncan, D.; Sanchez, R.

    1996-09-01

    This 1995 report contains data from routine radiological and non-radiological environmental monitoring activities. Summaries of significant environmental compliance programs in progress, such as National Environmental Policy Act documentation, environmental permits, environmental restoration and various waste management programs at Sandia National Laboratories in Albuquerque, New Mexico, are included.

  9. RESPECT: Gang Mediation at Albuquerque, New Mexico's Washington Middle School.

    ERIC Educational Resources Information Center

    Tabish, Kenneth R.; Orell, Linda Henry

    1996-01-01

    Presents conflict resolution and mediation techniques used to resolve conflicts among rival gangs at Washington Middle School, an inner-city school in Albuquerque, New Mexico. Discusses formal mediation techniques and mediation for both male and female gang members. Focuses on preserving self-respect and dignity for gang members in all conflict…

  10. Evaluation of the Albuquerque Indian School Motivational Environment Program.

    ERIC Educational Resources Information Center

    Hiat, Albert B.; And Others

    In order to evaluate the impact of a token economy behavior modification program implemented from 1970-71 in the Albuquerque Indian School (AIS), a secondary institution, a five-member evaluation team assessed standardized test results, behavioral data, and student and staff attitudes. A battery of tests (Tennessee Self-Concept Scale, SRA…

  11. Builders Challenge High Performance Builder Spotlight - Artistic Homes, Albuquerque, NM

    SciTech Connect

    2009-01-01

    Building America Builders Challenge fact sheet on Artistic Homes of Albuquerque, New Mexico. Describes the first true zero E-scale home in a hot-dry climate with ducts inside, R-50 attic insulation, roof-mounted photovoltaic power system, and solar thermal water heating.

  12. Wastewater reclamation and recharge: A water management strategy for Albuquerque

    SciTech Connect

    Gorder, P.J.; Brunswick, R.J.; Bockemeier, S.W.

    1995-12-31

    Approximately 61,000 acre-feet of the pumped water is annually discharged to the Rio Grande as treated wastewater. Albuquerque`s Southside Water Reclamation Plant (SWRP) is the primary wastewater treatment facility for most of the Albuquerque area. Its current design capacity is 76 million gallons per day (mgd), which is expected to be adequate until about 2004. A master plan currently is being prepared (discussed here in Wastewater Master Planning and the Zero Discharge Concept section) to provide guidelines for future expansions of the plant and wastewater infrastructure. Construction documents presently are being prepared to add ammonia and nitrogen removal capability to the plant, as required by its new discharge permit. The paper discusses water management strategies, indirect potable reuse for Albuquerque, water quality considerations for indirect potable reuse, treatment for potable reuse, geohydrological aspects of a recharge program, layout and estimated costs for a conceptual reclamation and recharge system, and work to be accomplished under phase 2 of the reclamation and recharge program.

  13. The Albuquerque Indian School: Culture, Environment and Change.

    ERIC Educational Resources Information Center

    Taylor, Anne; Swentzel, Rina

    1979-01-01

    The architectural renovation project at Albuquerque Indian School not only reclaimed dilapidated buildings but involved students and community in planning their learning environment and taught students practical career skills, such as plumbing, landscape and interior design, and woodworking. This article is part of a theme issue on multicultural…

  14. 76 FR 10389 - Reopening the Call for Nominations for the New Mexico Albuquerque and Farmington District...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-24

    ... Bureau of Land Management Reopening the Call for Nominations for the New Mexico Albuquerque and... (BLM) Albuquerque, New Mexico, and Farmington, New Mexico, Resource Advisory Councils (RAC). The RACs... within the Albuquerque and Farmington Districts. The Farmington, New Mexico, RAC is only...

  15. 40 CFR 81.83 - Albuquerque-Mid Rio Grande Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 17 2011-07-01 2011-07-01 false Albuquerque-Mid Rio Grande Intrastate... Designation of Air Quality Control Regions § 81.83 Albuquerque-Mid Rio Grande Intrastate Air Quality Control Region. The Albuquerque-Mid Rio Grande Intrastate Air Quality Control Region (New Mexico) is revised...

  16. 40 CFR 81.83 - Albuquerque-Mid Rio Grande Intrastate Air Quality Control Region.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 17 2010-07-01 2010-07-01 false Albuquerque-Mid Rio Grande Intrastate... Designation of Air Quality Control Regions § 81.83 Albuquerque-Mid Rio Grande Intrastate Air Quality Control Region. The Albuquerque-Mid Rio Grande Intrastate Air Quality Control Region (New Mexico) is revised...

  17. Product Searching with Shopping Bots.

    ERIC Educational Resources Information Center

    Rowley, Jennifer

    2000-01-01

    Using trial searches for three best-selling books, this study examined the search facilities offered by shopping bots, which support consumers with the product search and identification stage in e-shopping. Findings indicate that effectiveness of bots not only depends upon search facilities but also upon product coverage, and other added value…

  18. 8. VIEW EASTINTERIOR OF BLACKSMITH SHOP SECTION OF THE BETHLEM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. VIEW EAST-INTERIOR OF BLACKSMITH SHOP SECTION OF THE BETHLEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

  19. 6. VIEW WESTINTERIOR OF BOILER SHOP SECTION OF THE BETHLEHEM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. VIEW WEST-INTERIOR OF BOILER SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

  20. 9. VIEW WESTINTERIOR OF BLACKSMITH SHOP SECTION OF THE BETHLEHEM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. VIEW WEST-INTERIOR OF BLACKSMITH SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

  1. 7. VIEW EASTINTERIOR OF BOILER SHOP SECTION OF THE BETHLEHEM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. VIEW EAST-INTERIOR OF BOILER SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

  2. 2. VIEW SOUTHWESTNORTH ELEVATION OF BOILER SHOP SECTION OF THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. VIEW SOUTHWEST-NORTH ELEVATION OF BOILER SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

  3. 3. VIEW SOUTHNORTH ELEVATION OF BLACKSMITH SHOP SECTION OF THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. VIEW SOUTH-NORTH ELEVATION OF BLACKSMITH SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

  4. ProteinShop: A tool for interactive protein manipulation and steering

    SciTech Connect

    Crivelli, Silvia; Kreylos, Oliver; Max, Nelson; Hamann, Bernd; Bethel, Wes

    2004-05-25

    We describe ProteinShop, a new visualization tool that streamlines and simplifies the process of determining optimal protein folds. ProteinShop may be used at different stages of a protein structure prediction process. First, it can create protein configurations containing secondary structures specified by the user. Second, it can interactively manipulate protein fragments to achieve desired folds by adjusting the dihedral angles of selected coil regions using an Inverse Kinematics method. Last, it serves as a visual framework to monitor and steer a protein structure prediction process that may be running on a remote machine. ProteinShop was used to create initial configurations for a protein structure prediction method developed by a team that competed in CASP5. ProteinShop's use accelerated the process of generating initial configurations, reducing the time required from days to hours. This paper describes the structure of ProteinShop and discusses its main features.

  5. Simulation as a planning tool for job-shop production environment

    NASA Astrophysics Data System (ADS)

    Maram, Venkataramana; Nawawi, Mohd Kamal Bin Mohd; Rahman, Syariza Abdul; Sultan, Sultan Juma

    2015-12-01

    In this paper, we made an attempt to use discrete event simulation software ARENA® as a planning tool for job shop production environment. We considered job shop produces three types of Jigs with different sequence of operations to study and improve shop floor performance. The sole purpose of the study is to identifying options to improve machines utilization, reducing job waiting times at bottleneck machines. First, the performance of the existing system was evaluated by using ARENA®. Then identified improvement opportunities by analyzing base system results. Second, updated the model with most economical options. The proposed new system outperforms with that of the current base system by 816% improvement in delay times at paint shop by increase 2 to 3 and Jig cycle time reduces by Jig1 92%, Jig2 65% and Jig3 41% and hence new proposal was recommended.

  6. Genetic programming for evolving due-date assignment models in job shop environments.

    PubMed

    Nguyen, Su; Zhang, Mengjie; Johnston, Mark; Tan, Kay Chen

    2014-01-01

    Due-date assignment plays an important role in scheduling systems and strongly influences the delivery performance of job shops. Because of the stochastic and dynamic nature of job shops, the development of general due-date assignment models (DDAMs) is complicated. In this study, two genetic programming (GP) methods are proposed to evolve DDAMs for job shop environments. The experimental results show that the evolved DDAMs can make more accurate estimates than other existing dynamic DDAMs with promising reusability. In addition, the evolved operation-based DDAMs show better performance than the evolved DDAMs employing aggregate information of jobs and machines.

  7. MITRE's virtual model shop

    NASA Astrophysics Data System (ADS)

    Wingfield, Michael A.

    1995-04-01

    The exploration of visual data and the use of visual information during the design process can be greatly enhanced by working within the virtual environment where the user is closely coupled to the data by means of immersive technologies and natural user interfaces. Current technology enables us to construct a virtual environment utilizing 3D graphics projection, object generated stereo sound, tactile feedback, and voice command input. Advances in software architectures and user interfaces enable us to focus on enhancing the design process within the virtual environment. These explorations at MITRE have evolved into an application which focuses on the ability to create, manipulate, and explore photo and audio realistic 3D models of work spaces, office complexes, and entire communities in real-time. This application, the Virtual Interactive Planning System, is a component of the MITRE virtual model shop, a suite of applications which permits the user to design and manipulate computer graphics models within the virtual environment.

  8. Technical and Occupational Shops. Volume II.

    ERIC Educational Resources Information Center

    Ontario Dept. of Education, Toronto. School Planning and Building Research Section.

    The layouts and specifications provided are intended as a guide to school boards, educators, and architects. Drawings and room plans illustrate specifications for girls' occupational shop, graphic arts, carpentry (millwork and building construction shop), boys' occupational shop (mechanical), boys' occupational shop (building construction),…

  9. 12. TOOL ROOM SHOWING LANDIS MACHINE CO. BOL/T THREADER (L), ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. TOOL ROOM SHOWING LANDIS MACHINE CO. BOL/T THREADER (L), OSTER MANUFACTURING CO. PIPE MASTER (R), AND OLDMAN KINK, A SHOP-MADE WELDING STRENGTH TESTER (L, BACKGROUND). VIEW NORTHEAST - Oldman Boiler Works, Office/Machine Shop, 32 Illinois Street, Buffalo, Erie County, NY

  10. 1. South front wall of main section of roundhouse. Machine ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. South front wall of main section of roundhouse. Machine shop section of roundhouse at left. View to northwest. - Duluth & Iron Range Rail Road Company Shops, Roundhouse, Southwest of downtown Two Harbors, northwest of Agate Bay, Two Harbors, Lake County, MN

  11. 18. General view inside engine house section of roundhouse. Machine ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. General view inside engine house section of roundhouse. Machine shop section of roundhouse visible in background through large rectangular openings. View to west. - Duluth & Iron Range Rail Road Company Shops, Roundhouse, Southwest of downtown Two Harbors, northwest of Agate Bay, Two Harbors, Lake County, MN

  12. Process Waste Assessment - Paint Shop

    SciTech Connect

    Phillips, N.M.

    1993-06-01

    This Process Waste Assessment was conducted to evaluate hazardous wastes generated in the Paint Shop, Building 913, Room 130. Special attention is given to waste streams generated by the spray painting process because it requires a number of steps for preparing, priming, and painting an object. Also, the spray paint booth covers the largest area in R-130. The largest and most costly waste stream to dispose of is {open_quote}Paint Shop waste{close_quotes} -- a combination of paint cans, rags, sticks, filters, and paper containers. These items are compacted in 55-gallon drums and disposed of as solid hazardous waste. Recommendations are made for minimizing waste in the Paint Shop. Paint Shop personnel are very aware of the need to minimize hazardous wastes and are continuously looking for opportunities to do so.

  13. Process Waste Assessment, Mechanics Shop

    SciTech Connect

    Phillips, N.M.

    1993-05-01

    This Process Waste Assessment was conducted to evaluate hazardous wastes generated in the Mechanics Shop. The Mechanics Shop maintains and repairs motorized vehicles and equipment on the SNL/California site, to include motorized carts, backhoes, street sweepers, trash truck, portable emergency generators, trencher, portable crane, and man lifts. The major hazardous waste streams routinely generated by the Mechanics Shop are used oil, spent off filters, oily rags, and spent batteries. The used off and spent off filters make up a significant portion of the overall hazardous waste stream. Waste oil and spent batteries are sent off-site for recycling. The rags and spent on filters are not recycled. They are disposed of as hazardous waste. Mechanics Shop personnel continuously look for opportunities to minimize hazardous wastes.

  14. INTERIOR VIEW, LOOKING WEST, WITH OXYFUEL FLAME CUTTING MACHINE AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW, LOOKING WEST, WITH OXY-FUEL FLAME CUTTING MACHINE AND OPERATOR MR. FARLEY. - O'Neal Steel, Incorporated, Fabrication Shop, 744 Forty-first Avenue North, Birmingham, Jefferson County, AL

  15. INTERIOR VIEW, LOOKING SOUTHWEST, WITH PLASMA ARC BURNING MACHINE (GALT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW, LOOKING SOUTHWEST, WITH PLASMA ARC BURNING MACHINE (GALT INDUSTRIES) WHICH CUTS STEEL SHAPES AND OPERATOR PHILIP WILLOUBY. - O'Neal Steel, Incorporated, Fabrication Shop, 744 Forty-first Avenue North, Birmingham, Jefferson County, AL

  16. 26. OVERALL SHOT OF BASEMENT, MILL NO. 1. ORIGINALLY MACHINE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. OVERALL SHOT OF BASEMENT, MILL NO. 1. ORIGINALLY MACHINE SHOP. PALLETS ON FLOOR ADDED IN LATE 20th C. FOR CLOTH STORAGE. - Prattville Manufacturing Company, Number One, 242 South Court Street, Prattville, Autauga County, AL

  17. RIGGERS LOFT/PAINT SHOP/SHEET METAL SHOP, VIEW TO SOUTHEAST. THE PAINT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    RIGGERS LOFT/PAINT SHOP/SHEET METAL SHOP, VIEW TO SOUTHEAST. THE PAINT SHOP WAS LOCATED IN THE CLOSEST CORNER OF THE BUILDING. THE SHEET METAL SHOP WAS LOCATED IN THE CORNER OF THE BUILDING ON THE RIGHT. THE RIGGERS LOFT WAS LOCATED IN THE PORTION OF THE BUILDING OUT OF VIEW TO THE LEFT - Rosie the Riveter National Historical Park, Riggers Loft/Paint Shop/Sheet Metal Shop, 1322 Canal Boulevard, Richmond, Contra Costa County, CA

  18. Geothermal studies at Kirtland Air Force Base, Albuquerque, New Mexico

    SciTech Connect

    Riddle, L.; Grant, B.

    1981-05-01

    Due to an effort by government installations to discontinue use of natural gas, alternative energy sources are being investigated at Kirtland Air Force Base, Albuquerque, New Mexico. New Mexico has geologic characteristics favorable for geothermal energy utilization. Local heat flow and geochemical studies indicate a normal subsurface temperature regime. The alluvial deposits, however, extend to great depths where hot fluids, heated by the normal geothermal gradient, could be encountered. Two potential models for tapping geothermal energy are presented: the basin model and the fault model.

  19. Flexible Job Shop Scheduling with Multi-level Job Structures

    NASA Astrophysics Data System (ADS)

    Jang, Yang-Ja; Kim, Ki-Dong; Jang, Seong-Yong; Park, Jinwoo

    This paper deals with a scheduling problem in a flexible job shop with multi-level job structures where end products are assembled from sub-assemblies or manufactured components. For such shops MRP (Material Requirement Planning) logic is frequently used to synchronize and pace the production activities for the required parts. However, in MRP, the planning of operational-level activities is left to short term scheduling. So, we need a good scheduling algorithm to generate feasible schedules taking into account shop floor characteristics and multi-level job structures used in MRP. In this paper, we present a GA (Genetic Algorithm) solution for this complex scheduling problem based on a new gene to reflect the machine assignment, operation sequences and the levels of the operations relative to final assembly operation. The relative operation level is the control parameter that paces the completion timing of the components belonging to the same branch in the multi-level job hierarchy. We compare the genetic algorithm with several dispatching rules in terms of total tardiness and the genetic algorithm shows outstanding performance for about forty modified standard job-shop problem instances.

  20. Retailing and Shopping on the Internet.

    ERIC Educational Resources Information Center

    Rowley, Jennifer

    1996-01-01

    Internet advertising and commercial activity are increasing. This article examines challenges facing the retail industry on the Internet: location; comparison shopping; security, especially financial transactions; customer base and profile; nature of the shopping experience; and legal and marketplace controls. (PEN)

  1. 76 FR 81836 - Approval and Promulgation of Air Quality Implementation Plans; New Mexico; Albuquerque/Bernalillo...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-29

    ...; Albuquerque/Bernalillo County; Prevention of Significant Deterioration; Greenhouse Gas Tailoring Rule... Albuquerque/Bernalillo County's PSD permitting requirements for their greenhouse gas (GHG) emissions. EPA is... FR 59334). The comment period was open for thirty days and no comments were received. II. What...

  2. 77 FR 65821 - Approval and Promulgation of Implementation Plans; New Mexico; Albuquerque/Bernalillo County...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-31

    ... AGENCY 40 CFR Part 52 Approval and Promulgation of Implementation Plans; New Mexico; Albuquerque... Implementation Plan for Air Quality for the City of Albuquerque/Bernalillo County area pursuant to the Clean Air... the VPMD Procedures Manual; reorganizes 20.11.100 NMAC; and makes numerous non- substantive changes...

  3. Report & Evaluations on Opportunities Conference (Albuquerque Indian School, New Mexico, January 19, 1978).

    ERIC Educational Resources Information Center

    Toledo, Eulynda

    The conference was attended by 53 high school seniors and 65 parents, teachers, administrators, and counselors from Albuquerque Public Schools, Los Lunas, Bernalillo, Jemez, Grants, and Albuquerque Indian School. After an opening address and two speakers, participants attended three workshops. In the first workshop, a panel of students presented…

  4. 77 FR 30900 - Approval and Promulgation of Implementation Plans; New Mexico; Albuquerque/Bernalillo County...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-24

    ... Fees; and 0 b. Adding a new entry for Part 2 (20.11.2 NMAC) in numerical order by part number to read... AGENCY 40 CFR Part 52 Approval and Promulgation of Implementation Plans; New Mexico; Albuquerque... revisions to the applicable State Implementation Plan (SIP) for New Mexico Albuquerque/Bernalillo...

  5. Learn and Shop: Teaching Chemistry in Shopping Centers.

    ERIC Educational Resources Information Center

    Boaz, Patricia; East, James R.

    1984-01-01

    Discusses (1) the rationale for teaching college courses in shopping centers; (2) advantages to stores, students, and faculty; and (3) university procedures for the courses. Describes the content of a chemistry course including adaptations to the lack of lab facilities. Student reactions to the course are considered. (JM)

  6. The Shopping Mall: A Teenager Hangout.

    ERIC Educational Resources Information Center

    Anthony, Kathryn H.

    1985-01-01

    Investigated teenagers' use of the shopping mall as a "hangout" through interviews with 51 adolescents using the mall, and 10 hours of behavioral observations. Results indicated that many teenagers visit the shopping center regularly to watch members of the opposite sex, play video games, see friends, shop, and people-watch. (Author/NRB)

  7. Metric Conversion and the School Shop

    ERIC Educational Resources Information Center

    Jackman, Arthur A.

    1976-01-01

    Cost of metric conversion in school shops is examined, and the author categories all the shops in the school and gives useful information on which shops are the easiest to convert, which are most complicated, where resistance is most likely to be met, and where conversion is most urgent. The math department is seen as catalyst. (Editor/HD)

  8. 18 CFR 367.3940 - Account 394, Tools, shop and garage equipment.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ...) Ladders. (21) Lathes. (22) Machine tools. (23) Motor-driven tools. (24) Motors. (25) Pipe threading and... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Account 394, Tools... NATURAL GAS ACT Service Company Property Chart of Accounts § 367.3940 Account 394, Tools, shop and...

  9. 18 CFR 367.3940 - Account 394, Tools, shop and garage equipment.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ...) Ladders. (21) Lathes. (22) Machine tools. (23) Motor-driven tools. (24) Motors. (25) Pipe threading and... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Account 394, Tools... NATURAL GAS ACT Service Company Property Chart of Accounts § 367.3940 Account 394, Tools, shop and...

  10. 18 CFR 367.3940 - Account 394, Tools, shop and garage equipment.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ...) Ladders. (21) Lathes. (22) Machine tools. (23) Motor-driven tools. (24) Motors. (25) Pipe threading and... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Account 394, Tools... NATURAL GAS ACT Service Company Property Chart of Accounts § 367.3940 Account 394, Tools, shop and...

  11. 18 CFR 367.3940 - Account 394, Tools, shop and garage equipment.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ...) Ladders. (21) Lathes. (22) Machine tools. (23) Motor-driven tools. (24) Motors. (25) Pipe threading and... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Account 394, Tools... NATURAL GAS ACT Service Company Property Chart of Accounts § 367.3940 Account 394, Tools, shop and...

  12. 18 CFR 367.3940 - Account 394, Tools, shop and garage equipment.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...) Ladders. (21) Lathes. (22) Machine tools. (23) Motor-driven tools. (24) Motors. (25) Pipe threading and... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Account 394, Tools... NATURAL GAS ACT Service Company Property Chart of Accounts § 367.3940 Account 394, Tools, shop and...

  13. 1993 Site environmental report Sandia National Laboratories, Albuquerque, New Mexico

    SciTech Connect

    Culp, T.A.; Cheng, C.F.; Cox, W.; Durand, N.; Irwin, M.; Jones, A.; Lauffer, F.; Lincoln, M.; McClellan, Y.; Molley, K.

    1994-11-01

    This 1993 report contains monitoring data from routine radiological and nonradiological environmental surveillance activities. Summaries of significant environmental compliance programs in progress, such as National Environmental Policy Act documentation, environmental permits, environmental restoration, and various waste management programs for Sandia National Laboratories in Albuquerque, New Mexico, are included. The maximum offsite dose impact was calculated to be 0.0016 millirem. The total population within a 50-mile (80 kilometer) radius of Sandia National Laboratories/New Mexico received an estimated collective dose of 0.027 person-rem during 1993 from the laboratories operations, As in the previous year, the 1993 operations at Sandia National Laboratories/New Mexico had no discernible impact on the general public or on the environment. This report is prepared for the U.S. Department of Energy in compliance with DOE Order 5400.1.

  14. 1994 Site Environmental Report Sandia National Laboratories Albuquerque, New Mexico

    SciTech Connect

    Shyr, L.J.; Wiggins, T.; White, B.B.

    1995-09-01

    This 1994 report contains data from routine radiological and nonradiological environmental monitoring activities. Summaries of significant environmental compliance programs in progress, such as National Environmental Policy Act documentation, environmental permits, environmental restoration, and various waste management programs for Sandia National Laboratories in Albuquerque, New Mexico, are included. The maximum off-site dose impact from air emissions was calculated to be 1.5 x 10{sup -4} millirem. The total population within a 50-mile radius of Sandia National Laboratories/New Mexico received an estimated collective dose of 0.012 person-rem during 1994 from the laboratories` operations. This report is prepared for the U.S. Department of Energy in compliance with DOE Order 5400.1.

  15. Explosive Components Facility at Sandia National Laboratories, Albuquerque, New Mexico

    SciTech Connect

    Not Available

    1992-07-01

    The United States Department of Energy (DOE) has prepared an environmental assessment (EA) on the proposed Explosive Components Facility (ECF) at the Sandia National Laboratories, Albuquerque (SNL). This facility is needed to integrate, centralize, and enhance many of the explosive, neutron generation, and weapons testing programs currently in progress at SNL. In general, there is insufficient space in existing facilities for the development and testing activities required by modern explosives technologies. The EA examined the potential environmental impacts of the proposed ECF project and discussed potential alternatives. Based on the analyses in the EA, DOE has determined that the proposed action does not constitute a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969, and CEQ regulations at 40 CFR 1508.18 and 1508.27. Therefore, an environmental impact statement (EIS) is not required, and the DOE is issuing this Finding of No Significant Impact (FONSI).

  16. 1992 Environmental monitoring report, Sandia National Laboratories, Albuquerque, New Mexico

    SciTech Connect

    Culp, T.; Cox, W.; Hwang, H.; Irwin, M.; Jones, A.; Matz, B.; Molley, K.; Rhodes, W.; Stermer, D.; Wolff, T.

    1993-09-01

    This 1992 report contains monitoring data from routine radiological and nonradiological environmental surveillance activities. summaries of significant environmental compliance programs in progress, such as National Environmental Policy Act documentation, environmental permits, envirorunental restoration, and various waste management programs for Sandia National Laboratories in Albuquerque, New Mexico, are included. The maximum offsite dose impact was calculated to be 0.0034 millirem. The total population within a 50-mile radius of Sandia National Laboratories/New Mexico received an estimated collective dose of 0.019 person-rem during 1992 from the laboratories` operations. As in the previous year, the 1992 operations at Sandia National Laboratories/New Mexico had no discernible impact on the general public or on the environment.

  17. English in the Garment Shops.

    ERIC Educational Resources Information Center

    Verplaetse, Lorrie

    This text for limited-English-speaking workers in the garment industry consits of illustrated vocabulary words, grammar lessons, narratives or brief readings, and exercises on employment-related topics. The first section focuses on shop talk, including job-specific vocabulary, simple expressions and explanations, social language, seeking and…

  18. Planning for Shops and Laboratories.

    ERIC Educational Resources Information Center

    North Carolina State Dept. of Public Instruction, Raleigh. Div. of School Planning.

    General guidelines for educators and architects in planning for industrial education, shops, and laboratory facilities necessary to the instructional program, are provided. Characteristics of the environment discussed are as follows--(1) spatial, (2) thermal, (3) visual, (4) sonic, and (5) aesthetic. Utility services covered are electrical power,…

  19. Job Shop Scheduling Focusing on Role of Buffer

    NASA Astrophysics Data System (ADS)

    Hino, Rei; Kusumi, Tetsuya; Yoo, Jae-Kyu; Shimizu, Yoshiaki

    A scheduling problem is formulated in order to consistently manage each manufacturing resource, including machine tools, assembly robots, AGV, storehouses, material shelves, and so on. The manufacturing resources are classified into three types: producer, location, and mover. This paper focuses especially on the role of the buffer, and the differences among these types are analyzed. A unified scheduling formulation is derived from the analytical results based on the resource’s roles. Scheduling procedures based on dispatching rules are also proposed in order to numerically evaluate job shop-type production having finite buffer capacity. The influences of the capacity of bottle-necked production devices and the buffer on productivity are discussed.

  20. MACHINE COOLANT WASTE REDUCTION BY OPTIMIZING COOLANT LIFE

    EPA Science Inventory

    Machine shops use coolants to improve the life and function of machine tools. hese coolants become contaminated with oils with use, and this contamination can lead to growth of anaerobic bacteria and shortened coolant life. his project investigated methods to extend coolant life ...

  1. Access, Equity, and Opportunity. Women in Machining: A Model Program.

    ERIC Educational Resources Information Center

    Warner, Heather

    The Women in Machining (WIM) program is a Machine Action Project (MAP) initiative that was developed in response to a local skilled metalworking labor shortage, despite a virtual absence of women and people of color from area shops. The project identified post-war stereotypes and other barriers that must be addressed if women are to have an equal…

  2. 17. Machines in middle 1904 section of Building 59, Camera ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. Machines in middle 1904 section of Building 59, Camera is pointed SW. Large wheel is part of Post Lathe, or Bull Lathe, manufactured by Oliver Machinery Co. Machine at left is a smaller Lathe made by Yates American Machinery Co., also seen in photo WA-116-A-20. - Puget Sound Naval Shipyard, Pattern Shop, Farragut Avenue, Bremerton, Kitsap County, WA

  3. Summary of urban stormwater quality in Albuquerque, New Mexico, 2003-12

    USGS Publications Warehouse

    Storms, Erik F.; Oelsner, Gretchen P.; Locke, Evan A.; Stevens, Michael R.; Romero, Orlando C.

    2015-01-01

    The stormwater quality in Albuquerque was compared with that of six other Western U.S. cities (Phoenix, Arizona; Tucson, Arizona; Las Vegas, Nevada; Denver, Colorado; Salt Lake City, Utah; and Boise, Idaho) for selected constituents. In general, water-quality data for stormwater samples from these six other Western U.S. cities were similar to water-quality data for the stormwater samples from the Albuquerque outfalls. Median concentrations for suspended solids, total phosphorus, and bacteria (E. coli and fecal coliform) in stormwater samples from the Albuquerque outfalls, as a whole, were higher than those in samples from the other Western U.S. cities except for Las Vegas.

  4. Automated system for machine tool capacity and utilization

    SciTech Connect

    Bankes, W.F.

    1986-01-01

    An automated system based on Symphony spreadsheet softwre has been developed to monitor machine tool utilization and capacity in a small- to medium-sized machine shop. This application compiles reports on annual machine tool requirements and use from production routing data for a shop producing over 100 different small machined parts with batch sizes ranging from 100 to 1000 parts and up to 25,000 parts per year. The operational routings for approximately 30 parts are currently stored in the system. Levels of utilization are analyzed, which aids in determining the need for additional equipment or multiple workshifts, and thereby helps balance the workload and product flow. Valuable information was compiled in a special report for layout of a new shop facility. Group technology cell arrangements of equipment were analyzed for capacity and utilization. Many Symphony spreadsheet and data base management features were used to produce this program. The final system incorporated menu systems for users unfamiliar with this spreadsheet software.

  5. Shopping Problems among High School Students

    PubMed Central

    Grant, Jon E.; Potenza, Marc N.; Krishnan-Sarin, Suchitra; Cavallo, Dana A.; Desai, Rani A.

    2010-01-01

    Background Although shopping behavior among adolescents is normal, for some the shopping becomes problematic. An assessment of adolescent shopping behavior along a continuum of severity and its relationship to other behaviors and health issues is incompletely understood. Methods A large sample of high school students (n=3999) was examined using a self-report survey with 153 questions concerning demographic characteristics, shopping behaviors, other health behaviors including substance use, and functioning variables such as grades and violent behavior. Results The overall prevalence of problem shopping was 3.5% (95%CI: 2.93–4.07). Regular smoking, marijuana and other drug use, sadness and hopelessness, and antisocial behaviors (e.g., fighting, carrying weapons) were associated with problem shopping behavior in both boys and girls. Heavy alcohol use was significantly associated with problem shopping only in girls. Conclusion Problem shopping appears fairly common among high school students and is associated with symptoms of depression and a range of potentially addictive and antisocial behaviors. Significant distress and diminished behavioral control suggest that excessive shopping may often have significant associated morbidity. Additional research is needed to develop specific prevention and treatment strategies for adolescents who report problems with shopping. PMID:21497217

  6. 5. VIEW EASTOPENING IN WEST ELEVATION OF BLACKSMITH SHOP SECTION ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. VIEW EAST-OPENING IN WEST ELEVATION OF BLACKSMITH SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

  7. Machine Shop. Module 2: Measurement and Blueprint Reading. Instructor's Guide.

    ERIC Educational Resources Information Center

    Missouri Univ., Columbia. Instructional Materials Lab.

    This document consists of materials for a 12-unit course on the following topics: (1) introduction to precision measurement; (2) semiprecision linear measurement; (3) simple layout techniques; (4) measurement with vernier and dial calipers; (5) measuring with micrometers; (6) measurement and layout on a surface plate; (7) go/no-go inspection…

  8. Machine Shop. Trade and Industrial Education Trade Preparatory Training Guide.

    ERIC Educational Resources Information Center

    Nebraska State Dept. of Education, Lincoln. Div. of Vocational Education.

    One of a series of curriculum guides prepared for the metal occupations cluster of the construction/fabrication occupational group, this guide identifies the essentials of the machinist trade as recommended by the successful machinist. An instructional program based upon the implementation of this guide is expected to prepare a student to…

  9. 75 FR 68447 - Approval and Promulgation of Implementation Plans; Albuquerque/Bernalillo County, NM; Interstate...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-08

    ...The EPA is approving a revision to the Albuquerque/Bernalillo County, New Mexico State Implementation Plan (SIP) to address the ``good neighbor'' provisions of the Clean Air Act (CAA) section 110(a)(2)(D)(i), for the 1997 ozone and the 1997 fine particulate matter (PM2.5) National Ambient Air Quality Standards (NAAQS) as it applies to Albuquerque/Bernalillo County. The revision......

  10. Passion and dependency in online shopping activities.

    PubMed

    Wang, Chih-Chien; Yang, Hui-Wen

    2007-04-01

    This study examines the influence of harmonious passion (HP) and obsessive passion (OP) to online shopping dependency. The results show that both HP and OP might lead to online shopping dependency and online shoppers with OP are more dependent on online shopping activities. In addition, this study also found out that HP and OP could be denoted as a sequence of different intensities of passion, where HP might be a necessity of OP. PMID:17474850

  11. Rainfall-runoff in the Albuquerque, New Mexico, area: Measurements, analyses and comparisons

    USGS Publications Warehouse

    Anderson, C.E.; Ward, T.J.; Kelly, T.; ,

    2005-01-01

    Albuquerque, New Mexico, has experienced significant growth over the last 20 years like many other cities in the Southwestern United States. While the US population grew by 37% between the 1970 and 2000 censuses, the growth for Albuquerque was 83%. More people mean more development and increased problems of managing runoff from urbanizing watersheds. The U.S. Geological Survey (USGS) in cooperation with the Albuquerque Arroyo Metropolitan Flood Control Authority (AMAFCA) and the City of Albuquerque has maintained a rainfall-runoff data collection program since 1976. The data from measured precipitation events can be used to verify hydrologic modeling. In this presentation, data from a representative gaged watershed is analyzed and discussed to set the overall framework for the rainfall-runoff process in the Albuquerque area. Of particular interest are the basic relationships between rainfall and watershed runoff response and an analysis of curve numbers as an indicator of runoff function. In urbanized areas, four land treatment types (natural, irrigated lawns, compacted soil, and impervious) are used to define surface infiltration conditions. Rainfall and runoff gage data are used to compare curve number (CN) and initial abstraction/uniform infiltration (IA/INF) techniques in an Albuquerque watershed. The IA/INF method appears to produce superior results over the CN method for the measured rainfall events.

  12. Job shop scheduling problem with late work criterion

    NASA Astrophysics Data System (ADS)

    Piroozfard, Hamed; Wong, Kuan Yew

    2015-05-01

    Scheduling is considered as a key task in many industries, such as project based scheduling, crew scheduling, flight scheduling, machine scheduling, etc. In the machine scheduling area, the job shop scheduling problems are considered to be important and highly complex, in which they are characterized as NP-hard. The job shop scheduling problems with late work criterion and non-preemptive jobs are addressed in this paper. Late work criterion is a fairly new objective function. It is a qualitative measure and concerns with late parts of the jobs, unlike classical objective functions that are quantitative measures. In this work, simulated annealing was presented to solve the scheduling problem. In addition, operation based representation was used to encode the solution, and a neighbourhood search structure was employed to search for the new solutions. The case studies are Lawrence instances that were taken from the Operations Research Library. Computational results of this probabilistic meta-heuristic algorithm were compared with a conventional genetic algorithm, and a conclusion was made based on the algorithm and problem.

  13. 44. 1131 DOCK ST. COAST IRON AND MACHINE WORKS/TACOMA STEAM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    44. 1131 DOCK ST. COAST IRON AND MACHINE WORKS/TACOMA STEAM BOILER REPAIR SHOPS (1914). ONLY SURVIVING EXAMPLE OF ITS TYPE IN WATERFRONT AREA OF TACOMA. - Union Depot Area Study, Tacoma, Pierce County, WA

  14. 2. GENERAL VIEW OF SHOPPING CENTER AS SEEN FROM OPPOSITE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. GENERAL VIEW OF SHOPPING CENTER AS SEEN FROM OPPOSITE SIDE OF CONNECTICUT AVENUE - Park & Shop Shopping Center, 3507-3523 Connecticut Avenue Northwest between Ordway & Porter, Washington, District of Columbia, DC

  15. 10. VIEW OF BOILER SHOP FROM TOP OF BOX CAR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. VIEW OF BOILER SHOP FROM TOP OF BOX CAR WITH CIRCULAR CAR SHOP IN BACKGROUND LOOKING NORTHEAST. - Baltimore & Ohio Railroad, Mount Clare Shops, South side of Pratt Street between Carey & Poppleton Streets, Baltimore, Independent City, MD

  16. 5. RAILROAD TRRACKS LEADING TO PAINT & REPAIR SHOP; PASSENGER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. RAILROAD TRRACKS LEADING TO PAINT & REPAIR SHOP; PASSENGER CAR SHOP TO THE LEFT - Baltimore & Ohio Railroad, Mount Clare Passenger Car Shop, Southwest corner of Pratt & Poppleton Streets, Baltimore, Independent City, MD

  17. AUTOMOTIVE REPAIR SHOP, DETAIL OF BUILDING CORNER (MAIN WING) SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AUTOMOTIVE REPAIR SHOP, DETAIL OF BUILDING CORNER (MAIN WING) SHOWING WOOD EAVE AND STUCCO RAKEBOARD ON GABLE END, WITH SCALE. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

  18. AUTOMOTIVE REPAIR SHOP, DETAIL OF FABRICATING PRESS IN EAST END ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AUTOMOTIVE REPAIR SHOP, DETAIL OF FABRICATING PRESS IN EAST END OF MAIN WING, WITH SCALE. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

  19. AUTOMOTIVE REPAIR SHOP, DETAIL OF MILLS COAL BOILER WITH SCREWFEED ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AUTOMOTIVE REPAIR SHOP, DETAIL OF MILLS COAL BOILER WITH SCREW-FEED COAL HOPPER ON RIGHT SIDE. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

  20. AUTOMOTIVE REPAIR SHOP, SLIDING DOOR LEADING TO BOILER ROOM ON ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AUTOMOTIVE REPAIR SHOP, SLIDING DOOR LEADING TO BOILER ROOM ON SOUTH SIDE OF SOUTH WING, WITH SCALE. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

  1. Lube rack of Automotive and Tractor Repair Shops with Warehousefield ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Lube rack of Automotive and Tractor Repair Shops with Warehouse-field Equipment Repair Shop Building's wall to the right, looking from the south - Kekaha Sugar Company, Automotive and Tractor Repair Shops, 8315 Kekaha Road, Kekaha, Kauai County, HI

  2. AUTOMOTIVE REPAIR SHOP, SLIDING DOOR LEADING TO BOILER ROOM ON ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AUTOMOTIVE REPAIR SHOP, SLIDING DOOR LEADING TO BOILER ROOM ON SOUTH SIDE OF SOUTH WING. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

  3. View of south elevation of Automotive and Tractor Repair Shops ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of south elevation of Automotive and Tractor Repair Shops with the Warehouse Fabrication Shop and Stack in the background, looking from the southwest - Kekaha Sugar Company, Automotive and Tractor Repair Shops, 8315 Kekaha Road, Kekaha, Kauai County, HI

  4. AUTOMOTIVE REPAIR SHOP, DETAIL OF BUILDING CORNER (MAIN WING) SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AUTOMOTIVE REPAIR SHOP, DETAIL OF BUILDING CORNER (MAIN WING) SHOWING WOOD EAVE AND STUCCO RAKEBOARD ON GABLE END. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

  5. AUTOMOTIVE REPAIR SHOP, DETAIL OF MILLS COAL BOILER WITH SCREWFEED ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AUTOMOTIVE REPAIR SHOP, DETAIL OF MILLS COAL BOILER WITH SCREW-FEED COAL HOPPER ON RIGHT SIDE, WITH SCALE. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

  6. ERECTING SHOP INTERIOR, WITH UNRESTORED SP 1771, 260 STEAM LOCOMOTVE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ERECTING SHOP INTERIOR, WITH UNRESTORED SP 1771, 2-6-0 STEAM LOCOMOTVE IN FOREGROUND, LOOKING NORTHEAST. - Southern Pacific, Sacramento Shops, Erecting Shop, 111 I Street, Sacramento, Sacramento County, CA

  7. 10. Interior view, east shop, ground floor, looking northwest, showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. Interior view, east shop, ground floor, looking northwest, showing hardware storage rooms in tin shop area at right. - Larrabee & Hingston Company, Main Shop Building, 19 Howley Street, Peabody, Essex County, MA

  8. CAR SHOP TRANSFER TABLE, IN STORAGE AT WEST SIDE OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CAR SHOP TRANSFER TABLE, IN STORAGE AT WEST SIDE OF SHOPS, WEST END JOURNAL BEARING AND WHEELSET DETAIL, LOOKING NORTHEAST. - Southern Pacific, Sacramento Shops, Pitless Transfer Table, 111 I Street, Sacramento, Sacramento County, CA

  9. ERECTING SHOP, EAST SIDE, LOOKING SOUTH. LEFT FOREGROUND BREAK IN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ERECTING SHOP, EAST SIDE, LOOKING SOUTH. LEFT FOREGROUND BREAK IN WALL IS FOR PASSAGE OF STEAM-POWERED BELTING FROM POWERHOUSE. - Southern Pacific, Sacramento Shops, Erecting Shop, 111 I Street, Sacramento, Sacramento County, CA

  10. PAINT SHOP, DETAIL OF FABRICATED COLUMN AT JUNCTION OF WEST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    PAINT SHOP, DETAIL OF FABRICATED COLUMN AT JUNCTION OF WEST BAY (ORIGINAL) AND CENTER BAYS (SECOND ADDITION), LOOKING NORTHEAST. - Southern Pacific, Sacramento Shops, Paint Shop, 111 I Street, Sacramento, Sacramento County, CA

  11. PAINT SHOP, FIRST FLOOR, NORTHEAST CORNER OFFICE INTERIOR, LOOKING WEST. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    PAINT SHOP, FIRST FLOOR, NORTHEAST CORNER OFFICE INTERIOR, LOOKING WEST. PROJECTING WALLS WITH INFILLED ARCHES WERE PART OF ONE PAINTING BOOTH IN ORIGINAL STRUCTURE. - Southern Pacific, Sacramento Shops, Paint Shop, 111 I Street, Sacramento, Sacramento County, CA

  12. Aircraft assembly shop plant no. 2, view looking east ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Aircraft assembly shop plant no. 2, view looking east - northeast. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Aircraft Assembly Shop Plant, League Island, Philadelphia, Philadelphia County, PA

  13. Roadhouse and shops from the Chicago, Burlington and Quincy railroad ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Roadhouse and shops from the Chicago, Burlington and Quincy railroad mainline, facing northeast - Chicago, Burlington & Quincy Railroad, Roundhouse & Shops, Broadway & Spring Streets, Aurora, Kane County, IL

  14. Roadhouse and shops, from Chicago, Burlington and Quincy Railroad mainline, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Roadhouse and shops, from Chicago, Burlington and Quincy Railroad mainline, facing southeast. - Chicago, Burlington & Quincy Railroad, Roundhouse & Shops, Broadway & Spring Streets, Aurora, Kane County, IL

  15. Your Shopping Dollar. [Revised.] Money Management.

    ERIC Educational Resources Information Center

    Baran, Nancy H., Ed.; Tarrant, Sharon M., Ed.

    This booklet on shopping, 1 in a series of 12, covers all the basic aspects of personal- and family-money management. Suitable for use by high school and college students as well as adults, this handbook tells how to plan spending, develop shopping skills, and handle consumer problems effectively. Section 1 on consumers and the economy overviews…

  16. Basic Shop Fundamentals for the Mechanic.

    ERIC Educational Resources Information Center

    Younce, J. R.; And Others

    These self-study materials are a basic course for Marines working as mechanics. The course contains three study units. The first unit explains mechanics' hand tools and their proper care and usage. The second unit introduces the duties of the personnel at a basic level, describes the areas of a typical shop, and deals with shop operations and…

  17. Teacher Liability in School-Shop Accidents.

    ERIC Educational Resources Information Center

    Kegin, Denis J.

    The intent of the book is to stimulate interest in the problem of shop-teacher liability and to identify certain needs which have not been adequately met by existing laws and statutes. Chapter 1, The Significance of Teacher Liability, discusses basic legal considerations, the environment of the school shop, and the possibility of liability.…

  18. How to Shop for Health Insurance

    MedlinePlus

    ... Know About Zika & Pregnancy How to Shop for Health Insurance KidsHealth > For Parents > How to Shop for Health Insurance Print A A A Text Size What's in ... seguro médico? In America today, we all need health insurance. You do. Your kids do. It's not a " ...

  19. Product Characteristics and Internet Shopping Intentions.

    ERIC Educational Resources Information Center

    Vijayasarathy, Leo R.

    2002-01-01

    Discussion of electronic commerce and online marketing focuses on an empirical study that investigated differences between Internet shopping intentions for products categorized by cost and tangibility. Highlights include hypotheses; respondent characteristics; results that showed that intentions to shop using the Internet differ by tangibility of…

  20. Shop Tools. FOS: Fundamentals of Service.

    ERIC Educational Resources Information Center

    John Deere Co., Moline, IL.

    This shop tools manual is one of a series of power mechanics texts and visual aids on servicing of automotive and off-the-road equipment. Materials provide basic information and illustrations for use by vocational students and teachers as well as shop servicemen and laymen. Sections describe the use of the following tools: screwdrivers, hammers,…

  1. The General Shop. Bulletin, 1929, No. 30

    ERIC Educational Resources Information Center

    Proffitt, Maris M.

    1929-01-01

    The general shop is a form of instructional organization for offering work in a variety of shop activities. It is an outgrowth of the general recognition of the need for provision in the school curriculum of exploratory and developmental types of experiences for children of approximately the junior high school age. It also meets an outstanding…

  2. 30 CFR 57.4761 - Underground shops.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... of fire, and air leakage at each opening to the shop. (2) Each control door shall be— (i) Constructed so that, once closed, it will not reopen as a result of a differential in air pressure; (ii..., routing of the mine shop air directly to an exhaust system, reversal of mechanical ventilation, or use...

  3. 30 CFR 57.4761 - Underground shops.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... of fire, and air leakage at each opening to the shop. (2) Each control door shall be— (i) Constructed so that, once closed, it will not reopen as a result of a differential in air pressure; (ii..., routing of the mine shop air directly to an exhaust system, reversal of mechanical ventilation, or use...

  4. 30 CFR 57.4761 - Underground shops.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... of fire, and air leakage at each opening to the shop. (2) Each control door shall be— (i) Constructed so that, once closed, it will not reopen as a result of a differential in air pressure; (ii..., routing of the mine shop air directly to an exhaust system, reversal of mechanical ventilation, or use...

  5. 30 CFR 57.4761 - Underground shops.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... of fire, and air leakage at each opening to the shop. (2) Each control door shall be— (i) Constructed so that, once closed, it will not reopen as a result of a differential in air pressure; (ii..., routing of the mine shop air directly to an exhaust system, reversal of mechanical ventilation, or use...

  6. 30 CFR 57.4761 - Underground shops.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... of fire, and air leakage at each opening to the shop. (2) Each control door shall be— (i) Constructed so that, once closed, it will not reopen as a result of a differential in air pressure; (ii..., routing of the mine shop air directly to an exhaust system, reversal of mechanical ventilation, or use...

  7. Dermatoses among floral shop workers.

    PubMed

    Thiboutot, D M; Hamory, B H; Marks, J G

    1990-01-01

    Concern about the increasing incidence of hand dermatitis in floral shop workers in the United States and its possible association to the plant Alstroemeria, a flower that has become popular since its introduction in 1981, prompted investigation of the prevalence and cause of hand dermatitis in a sample of floral workers. Fifty-seven floral workers were surveyed, and 15 (26%) reported hand dermatitis within the previous 12 months. Sixteen floral workers (eight with dermatitis) volunteered to be patch tested to the North American Contact Dermatitis Group Standard and Perfume Trays, a series of eight pesticides and 20 plant allergens. Of four of seven floral designers and arrangers who reported hand dermatitis, three reacted positively to patch tests to tuliposide A, the allergen in Alstroemeria. Patch test readings for all other plant extracts were negative. A positive reading for a test to one pesticide, difolatan (Captafol), was noted, the relevance of which is unknown.

  8. Detail of north end of the Electrical Shop (foreground) and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail of north end of the Electrical Shop (foreground) and Sheet Metal Shop, note the metal-frame windows in the Electrical Shop, view facing east - Kahului Cannery, Plant No. 28, Boiler House, Sheet Metal and Electrical Shops, 120 Kane Street, Kahului, Maui County, HI

  9. Setup reduction approaches for machining

    SciTech Connect

    Gillespie, L.K.

    1997-04-01

    Rapid setup is a common improvement approach in press working operations such as blanking and shearing. It has paid major dividends in the sheet metal industry. It also has been a major improvement thrust for high-production machining operations. However, the literature does not well cover all the setup operations and constraints for job shop work. This review provides some insight into the issues involved. It highlights the floor problems and provides insights for further improvement. The report is designed to provide a quick understanding of the issues.

  10. 6. North wall and east end of air brake shop ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. North wall and east end of air brake shop section of roundhouse at center. East end of boiler shop section of roundhouse to the right of air brake shop. East end of blacksmith shop section of roundhouse at far right. View to southeast. - Duluth & Iron Range Rail Road Company Shops, Roundhouse, Southwest of downtown Two Harbors, northwest of Agate Bay, Two Harbors, Lake County, MN

  11. Profiling the Shopping Behavior of Elderly Consumers.

    ERIC Educational Resources Information Center

    Mason, J. Barry; Bearden, William O.

    1978-01-01

    Data were collected by personal interview on shopping roles, information processing, food stamp and coupon use, store brand purchases, mispricing and product unavailability experiences, and with familiarity with fair trade practices. Implications and directions for further research are suggested. (Author)

  12. Food Shopping Behaviors and Exposure to Discrimination

    PubMed Central

    Zenk, Shannon N.; Schulz, Amy J.; Israel, Barbara A.; Mentz, Graciela; Miranda, Patricia Y.; Opperman, Alisha; Odoms-Young, Angela M.

    2013-01-01

    Objective This study examined food shopping behaviors, particularly distance to grocery shop, and exposure to discrimination. Design Cross-sectional observational study utilizing data from a community survey, neighborhood food environment observations, and the decennial census. Setting Three communities in Detroit, Michigan, USA. Subjects Probability sample of 919 African-American, Latino, and White adults in 146 census blocks and 69 census block groups. Results On average, respondents shopped for groceries 3·1 miles from home, with 30·9% shopping within one mile and 22·3% more than five miles from home. Longer distance to shop was associated with being younger, African-American (compared to Latino), a woman, higher socioeconomic status, lower satisfaction with the neighborhood food environment, and living in a neighborhood with higher poverty, without a large grocery store, and farther from the nearest supermarket. African-Americans and those with the lowest incomes were particularly likely to report unfair treatment at food outlets. Each mile increase in distance to shop was associated with a 7% increase in the odds of unfair treatment; this relationship did not differ by race/ethnicity. Conclusions This study suggests that unfair treatment in retail interactions warrants investigation as a pathway by which restricted neighborhood food environments and food shopping behaviors may adversely affect health and contribute to health disparities. Efforts to promote “healthy” and equitable food environments should emphasize local availability and affordability of a range of healthy food products, as well as fair treatment while shopping regardless of race/ethnicity or socioeconomic status. PMID:23534814

  13. A hybrid job-shop scheduling system

    NASA Technical Reports Server (NTRS)

    Hellingrath, Bernd; Robbach, Peter; Bayat-Sarmadi, Fahid; Marx, Andreas

    1992-01-01

    The intention of the scheduling system developed at the Fraunhofer-Institute for Material Flow and Logistics is the support of a scheduler working in a job-shop. Due to the existing requirements for a job-shop scheduling system the usage of flexible knowledge representation and processing techniques is necessary. Within this system the attempt was made to combine the advantages of symbolic AI-techniques with those of neural networks.

  14. Healthful grocery shopping. Perceptions and barriers.

    PubMed

    Hollywood, Lynsey E; Cuskelly, Geraldine J; O'Brien, Michelle; McConnon, Aine; Barnett, Julie; Raats, Monique M; Dean, Moira

    2013-11-01

    While there is evidence of the factors influencing the healthfulness of consumers' food choice, little is known about how consumers perceive the healthfulness of their shopping. This study aimed to explore consumers' perceptions of, and identify barriers to, conducting a healthful shop. Using a qualitative approach, consisting of an accompanied shop and post-shop telephone interview, 50 grocery shoppers were recruited. Results showed that consumers used three criteria to identify a healthful shop: (1) inclusion of healthful foods; (2) avoidance or restriction of particular foods; and (3) achieving a balance between healthful and unhealthful foods. Those who take a balanced approach employ a more holistic approach to their diet while those who avoid or include specific foods may be setting criteria to purchase only certain types of food. The effectiveness of any of these strategies in improving healthfulness is still unclear and requires further investigation. Two barriers to healthful shopping were: (i) lack of self-efficacy in choosing, preparing and cooking healthful foods and (ii) conflicting needs when satisfying self and others. This highlights the need for interventions targeted at building key food skills and for manufacturers to make healthful choices more appealing. PMID:23831013

  15. 76 FR 54799 - Flowserve Corporation, Albuquerque, NM; Notice of Negative Determination on Reconsideration

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-02

    ... Employment and Training Administration Flowserve Corporation, Albuquerque, NM; Notice of Negative... 14, 2011 (76 FR 21040). Workers at the subject firm manufactured industrial pumps. The petitioner (a... resulted in a negative determination based on the findings that Section 222(a) of the Trade Act of 1974,...

  16. Builders Challenge High Performance Builder Spotlight: Artistic Homes, Albuquerque, New Mexico

    SciTech Connect

    2009-12-22

    Building America Builders Challenge fact sheet on Artistic Homes of Albuquerque, New Mexico. Standard features of their homes include advanced framed 2x6 24-inch on center walls, R-21 blown insulation in the walls, and high-efficiency windows.

  17. 75 FR 5698 - Approval and Promulgation of Implementation Plans; Albuquerque-Bernalillo County, NM; Excess...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-04

    ... into the New Mexico SIP for Albuquerque- Bernalillo County on April 10, 1980 (42 FR 24468) at 40 CFR 52...), April 27, 1977 (42 FR 21472); EPA's final rule for Idaho's sulfur dioxide control strategy, November 8, 1977 (42 FR 58171); and the latest clarification of EPA's policy issued on December 5, 2001...

  18. Technological In-Migration and Curricular Change; Educational Politics in Albuquerque, 1945-1965.

    ERIC Educational Resources Information Center

    Hales, William M., Jr.; Burlingame, Martin

    The impact of a large in-migration of scientists and technicians on the educational policies of the Albuquerque, New Mexico, public school system from 1945 to 1965 was investigated for the purpose of analyzing the educational politics of a system related to an increasing tempo of demands for a more academic curriculum. A case study design which…

  19. Financial administration of work for nonfederal sponsors, DOE Field Office (AL), Albuquerque, New Mexico

    SciTech Connect

    Not Available

    1991-09-30

    The Department of Energy (DOE) Field Office, Albuquerque (AL) is responsible for managing and controlling nonfederally sponsored work done by Los Alamos National Laboratory (LANL). The audit objective was to determine whether the funding of, and accounting for, work done under a 1984 funds-in agreement and work for others in Fiscal Year (FY) 1989 complied with laws, regulations, and policies.

  20. Evaluation of the geothermal resource in the area of Albuquerque, New Mexico

    SciTech Connect

    Jiracek, G.R.; Swanberg, C.A.; Morgan, P.; Parker, M.D.

    1983-07-01

    Factors indicating a potential geothermal resource near Albuquerque are: (1) nearby volcanoes active as recently as 120,000 years ago, (2) gravity interpretation indicating a potential reservoir averaging 1.5 km thickness, (3) high heat flow near the city, (4) warm waters (>30/sup 0/C) in municipal wells, (5) recent seismicity indicating active faulting, thereby, allowing the possibility of deep hydrothermal circulation, (6) high shallow (<30 m) temperature gradients (>100/sup 0/C/km) discovered in our drillholes, (7) deeper (<500 m) gradients from water wells exceeding 80/sup 0/C/km, and (8) chemical analyses of 88 groundwater samples yielding estimated base reservoir temperatures as high as 190/sup 0/C. An area of elevated shallow temperature gradients (less than or equal to 140/sup 0/C/km) was discovered a few kilometers west of Albuquerque by our 69 hole drilling program. Resistivity, magnetic, and gravity measurements combined with computer modeling suggests that heated ground water is forced closer to the surface here by flow over a buried ridge. A well drilled nearby yielded the highest recorded temperature in the Albuquerque area at its maximum depth (32.8/sup 0/C at 364 m). The deep gradient is 35/sup 0/C/km. An oil test well close by reported large volumes of water at 1 km; therefore, the possibility of a low temperature (>50/sup 0/C) geothermal resource exists west of Albuquerque at less than 1 km depth.

  1. 62. SIXTEEN INCH GUN MOUNTED ON THE MACHINING LATHE; LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    62. SIXTEEN INCH GUN MOUNTED ON THE MACHINING LATHE; LOOKING WSW. THE GUN ITSELF EXTENDS BEYOND THE BRICK ARCHES OF THE MAIN SHOP FLOOR'S W WALL AND INTO THE W AISLE. THE LATHE'S CUTTING HEAD CAN BE SEEN AT THE RIGHT CENTER OF THE VIEW. (Ryan) - Watervliet Arsenal, Building No. 110, Hagner Road between Schull & Whittemore Roads, Watervliet, Albany County, NY

  2. Multiagent scheduling method with earliness and tardiness objectives in flexible job shops.

    PubMed

    Wu, Zuobao; Weng, Michael X

    2005-04-01

    Flexible job-shop scheduling problems are an important extension of the classical job-shop scheduling problems and present additional complexity. Such problems are mainly due to the existence of a considerable amount of overlapping capacities with modern machines. Classical scheduling methods are generally incapable of addressing such capacity overlapping. We propose a multiagent scheduling method with job earliness and tardiness objectives in a flexible job-shop environment. The earliness and tardiness objectives are consistent with the just-in-time production philosophy which has attracted significant attention in both industry and academic community. A new job-routing and sequencing mechanism is proposed. In this mechanism, two kinds of jobs are defined to distinguish jobs with one operation left from jobs with more than one operation left. Different criteria are proposed to route these two kinds of jobs. Job sequencing enables to hold a job that may be completed too early. Two heuristic algorithms for job sequencing are developed to deal with these two kinds of jobs. The computational experiments show that the proposed multiagent scheduling method significantly outperforms the existing scheduling methods in the literature. In addition, the proposed method is quite fast. In fact, the simulation time to find a complete schedule with over 2000 jobs on ten machines is less than 1.5 min.

  3. 17. BIRD'S EYE VIEW OF FABRICATING SHOP FROM THE HOMESTEAD ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. BIRD'S EYE VIEW OF FABRICATING SHOP FROM THE HOMESTEAD HIGH LEVEL BRIDGE. Jet Lowe, Photographer, 1989. - U.S. Steel Homestead Works, Auxiliary Buildings & Shops, Along Monongahela River, Homestead, Allegheny County, PA

  4. West end view, "Boat Shop" open doorway, Facility 7 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    West end view, "Boat Shop" - open doorway, Facility 7 connected on the left, view facing east-southeast - U.S. Naval Base, Pearl Harbor, Boat Shop, Seventh Street near Avenue E, Pearl City, Honolulu County, HI

  5. 1. EXTERIOR OF CIVIL ENGINEERING MAINTENANCE SHOP, BUILDING 103, LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. EXTERIOR OF CIVIL ENGINEERING MAINTENANCE SHOP, BUILDING 103, LOOKING NORTH. - Mill Valley Air Force Station, Civil Engineering Maintenance Shop, East Ridgecrest Boulevard, Mount Tamalpais, Mill Valley, Marin County, CA

  6. First roundhouse and shops. Photograph taken between 1874 and 1878, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    First roundhouse and shops. Photograph taken between 1874 and 1878, at the same time as IL-8-78. Looking north - Chicago, Burlington & Quincy Railroad, Roundhouse & Shops, Broadway & Spring Streets, Aurora, Kane County, IL

  7. 11. VIEW OF CIRCULAR CAR SHOP OVER TOPS OF BOX ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. VIEW OF CIRCULAR CAR SHOP OVER TOPS OF BOX CARS LOOKING NORTHEAST. - Baltimore & Ohio Railroad, Mount Clare Shops, South side of Pratt Street between Carey & Poppleton Streets, Baltimore, Independent City, MD

  8. 3. GENERAL VIEW OF PASSENGER CAR SHOP; RAILROAD TRACKS IN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. GENERAL VIEW OF PASSENGER CAR SHOP; RAILROAD TRACKS IN FOREGROUND - Baltimore & Ohio Railroad, Mount Clare Passenger Car Shop, Southwest corner of Pratt & Poppleton Streets, Baltimore, Independent City, MD

  9. 14. AERIAL VIEW OF ENGINE DISPLAY INSIDE PASSENGER CAR SHOP ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. AERIAL VIEW OF ENGINE DISPLAY INSIDE PASSENGER CAR SHOP (NOW A TRANSPORTATION MUSEUM) - Baltimore & Ohio Railroad, Mount Clare Passenger Car Shop, Southwest corner of Pratt & Poppleton Streets, Baltimore, Independent City, MD

  10. 21. General view inside boiler shop section of roundhouse. View ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. General view inside boiler shop section of roundhouse. View to west. - Duluth & Iron Range Rail Road Company Shops, Roundhouse, Southwest of downtown Two Harbors, northwest of Agate Bay, Two Harbors, Lake County, MN

  11. 22. General view inside air brake shop section of roundhouse. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. General view inside air brake shop section of roundhouse. View to west. - Duluth & Iron Range Rail Road Company Shops, Roundhouse, Southwest of downtown Two Harbors, northwest of Agate Bay, Two Harbors, Lake County, MN

  12. 20. General view inside blacksmith shop section of roundhouse. View ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. General view inside blacksmith shop section of roundhouse. View to northwest. - Duluth & Iron Range Rail Road Company Shops, Roundhouse, Southwest of downtown Two Harbors, northwest of Agate Bay, Two Harbors, Lake County, MN

  13. Interior view of the Sheet Metal Shop showing the roof ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Interior view of the Sheet Metal Shop showing the roof trusses and corrugated metal roof covering, view facing northwest - Kahului Cannery, Plant No. 28, Boiler House, Sheet Metal and Electrical Shops, 120 Kane Street, Kahului, Maui County, HI

  14. 11. Interior view, second floor, tin shop area looking southwest, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. Interior view, second floor, tin shop area looking southwest, showing laminated plank arched roof trusses. - Larrabee & Hingston Company, Main Shop Building, 19 Howley Street, Peabody, Essex County, MA

  15. HANGAR SECTION WITH SHOPS ON RIGHT AND LEFT, FROM ENTERPRISE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    HANGAR SECTION WITH SHOPS ON RIGHT AND LEFT, FROM ENTERPRISE ROAD, VIEW FACING EAST-SOUTHEAST. - Naval Air Station Barbers Point, Assembly & Repair Shop, Between Enterprise Avenue & Wright, Midway, & Langley Streets, Ewa, Honolulu County, HI

  16. SHOPS AND HANGAR SECTIONS OF BUILDING, VIEW FROM ENTERPRISE STREET, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    SHOPS AND HANGAR SECTIONS OF BUILDING, VIEW FROM ENTERPRISE STREET, VIEW FACING SOUTH-SOUTHEAST. - Naval Air Station Barbers Point, Assembly & Repair Shop, Between Enterprise Avenue & Wright, Midway, & Langley Streets, Ewa, Honolulu County, HI

  17. ELEVATION LOOKING WEST OF PRINCIPLE FACADE OF SIGN SHOP ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ELEVATION LOOKING WEST OF PRINCIPLE FACADE OF SIGN SHOP - New York State Soldiers & Sailors Home, Sign Shop, Department of Veterans Affairs Medical Center, 76 Veterans Avenue, Bath, Steuben County, NY

  18. INTERIOR OF EASTERN ROOM OF PAINT SHOP PORTION OF BUILDING, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR OF EASTERN ROOM OF PAINT SHOP PORTION OF BUILDING, FACING SOUTHWEST - Vancouver Barracks, Paint Shop and Central Heating Plant, East Fifth Street southeast of McLoughlin Road, Vancouver, Clark County, WA

  19. 9. Interior view looking E on second floor Paint Shop. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. Interior view looking E on second floor Paint Shop. - Central of Georgia Railway, Savannah Repair Shops & Terminal Facilities, Paint & Coach Barn, Bounded by West Broad, Jones, West Boundary & Hull Streets, Savannah, Chatham County, GA

  20. INTERIOR OF CENTRAL ROOM OF PAINT SHOP PORTION OF BUILDING, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR OF CENTRAL ROOM OF PAINT SHOP PORTION OF BUILDING, FACING SOUTHEAST - Vancouver Barracks, Paint Shop and Central Heating Plant, East Fifth Street southeast of McLoughlin Road, Vancouver, Clark County, WA

  1. Rod shop, roof and truss detail showing older pink roof ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Rod shop, roof and truss detail showing older pink roof truss, newer pratt truss, and longitudinal, truss for overhead traveling crane - Chicago, Burlington & Quincy Railroad, Roundhouse & Shops, Broadway & Spring Streets, Aurora, Kane County, IL

  2. 33. GENERAL VIEW OF SHOPS COMPLEX LOOKING EAST, PAYMASTER'S OFFICE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    33. GENERAL VIEW OF SHOPS COMPLEX LOOKING EAST, PAYMASTER'S OFFICE IN FOREGROUND, LEFT; PUMPHOUSE, CENTER; SHOPS BUILDING TO RIGHT; SHEDS, FAR RIGHT - Soudan Iron Mine, Tower-Soudan State Park, Tower, St. Louis County, MN

  3. 1. Oil House, Southern Pacific Railroad Carlin Shops, southwest facade, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Oil House, Southern Pacific Railroad Carlin Shops, southwest facade, view to northeast (135mm lens). - Southern Pacific Railroad, Carlin Shops, Oil House, Foot of Sixth Street, Carlin, Elko County, NV

  4. 2. Oil House, Southern Pacific Railroad Carlin Shops, northwest elevation, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. Oil House, Southern Pacific Railroad Carlin Shops, northwest elevation, view to southeast (135mm lens). - Southern Pacific Railroad, Carlin Shops, Oil House, Foot of Sixth Street, Carlin, Elko County, NV

  5. 4. Oil House, Southern Pacific Railroad Carlin Shops, southeast elevation, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. Oil House, Southern Pacific Railroad Carlin Shops, southeast elevation, view to northwest (90mm lens). - Southern Pacific Railroad, Carlin Shops, Oil House, Foot of Sixth Street, Carlin, Elko County, NV

  6. 1. SOUTHWEST FRONT AND SOUTHEAST SIDE OF BLACKSMITH SHOP REMAINS, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. SOUTHWEST FRONT AND SOUTHEAST SIDE OF BLACKSMITH SHOP REMAINS, TENANT HOUSE IN BACKGROUND - Mount Etna Iron Works, Blacksmith Shop, East of U.S. Route 22 on T.R. 463, Williamsburg, Blair County, PA

  7. A&M. TAN607. Sections for second phase expansion: engine maintenance, machine, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. TAN-607. Sections for second phase expansion: engine maintenance, machine, and welding shops; high bay assembly shop, chemical cleaning room (decontamination). Details of sliding door hoods. Approved by INEEL Classification Office for public release. Ralph M. Parsons 1299-5-ANP/GE-3-607-A 109. Date: August 1956. INEEL index code no. 034-0607-00-693-107169 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  8. Electric machine

    SciTech Connect

    El-Refaie, Ayman Mohamed Fawzi; Reddy, Patel Bhageerath

    2012-07-17

    An interior permanent magnet electric machine is disclosed. The interior permanent magnet electric machine comprises a rotor comprising a plurality of radially placed magnets each having a proximal end and a distal end, wherein each magnet comprises a plurality of magnetic segments and at least one magnetic segment towards the distal end comprises a high resistivity magnetic material.

  9. Nonplanar machines

    SciTech Connect

    Ritson, D. )

    1989-05-01

    This talk examines methods available to minimize, but never entirely eliminate, degradation of machine performance caused by terrain following. Breaking of planar machine symmetry for engineering convenience and/or monetary savings must be balanced against small performance degradation, and can only be decided on a case-by-case basis. 5 refs.

  10. Permutation Machines.

    PubMed

    Bhatia, Swapnil; LaBoda, Craig; Yanez, Vanessa; Haddock-Angelli, Traci; Densmore, Douglas

    2016-08-19

    We define a new inversion-based machine called a permuton of n genetic elements, which allows the n elements to be rearranged in any of the n·(n - 1)·(n - 2)···2 = n! distinct orderings. We present two design algorithms for architecting such a machine. We define a notion of a feasible design and use the framework to discuss the feasibility of the permuton architectures. We have implemented our design algorithms in a freely usable web-accessible software for exploration of these machines. Permutation machines could be used as memory elements or state machines and explicitly illustrate a rational approach to designing biological systems.

  11. Permutation Machines.

    PubMed

    Bhatia, Swapnil; LaBoda, Craig; Yanez, Vanessa; Haddock-Angelli, Traci; Densmore, Douglas

    2016-08-19

    We define a new inversion-based machine called a permuton of n genetic elements, which allows the n elements to be rearranged in any of the n·(n - 1)·(n - 2)···2 = n! distinct orderings. We present two design algorithms for architecting such a machine. We define a notion of a feasible design and use the framework to discuss the feasibility of the permuton architectures. We have implemented our design algorithms in a freely usable web-accessible software for exploration of these machines. Permutation machines could be used as memory elements or state machines and explicitly illustrate a rational approach to designing biological systems. PMID:27383067

  12. 1. THREEQUARTER VIEW OF MECHANICAL SHOP, SHOWING EAST AND NORTH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. THREE-QUARTER VIEW OF MECHANICAL SHOP, SHOWING EAST AND NORTH SIDES; LOOKING SOUTHWEST; POWER PLANT IN BACKGROUND AT RIGHT; SAWTOOTH MONITORS ON BEEF KILL (BUILDING 149) VISIBLE ABOVE SHOP BUILDING AT CENTER OF PHOTO - Rath Packing Company, Mechanical Shop, Sycamore Street between Elm & Eighteenth Streets, Waterloo, Black Hawk County, IA

  13. Shopping Centers: Their Development and Impact on a Community.

    ERIC Educational Resources Information Center

    Berezowski, P. E.; And Others

    Presenting extensive background material on the development of shopping centers, this paper includes elementary and junior high school outdoor education activities centering upon shopping center studies. Background material includes analysis of the following: shopping center types (architecture, regional location, etc); land use (guidelines for…

  14. Teaching Spanish on Weekends and in Shopping Centers.

    ERIC Educational Resources Information Center

    Baker, Clayton; East, James R.

    1982-01-01

    Describes two programs for adult learners, Weekend College and Learn and Shop. Weekend College offered credit courses on Saturdays and Sundays; Learn and Shop used employee training rooms at five major shopping centers. Statistics on both programs are given as well as a description of the Spanish Department offerings and reactions. (AMH)

  15. Internet Shopping Behavior of College of Education Students

    ERIC Educational Resources Information Center

    Kiyici, Mubin

    2012-01-01

    Internet is an important facilitator for human and humans use this medium almost every phase. As a shopping medium, internet attract human so attract researcher. Younger people can adapt newer technologies so they can adapt internet as shopping tool. In this research it is tried to define college of education students' online shopping behavior and…

  16. View north of tube bending shop in boilermakers department located ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View north of tube bending shop in boilermakers department located in southeast corner of the structural shop building (building 57). The computer controlled tube bender can be programmed to bend boiler tubing to nearly any required configuration - Naval Base Philadelphia-Philadelphia Naval Shipyard, Structure Shop, League Island, Philadelphia, Philadelphia County, PA

  17. 6. Partial view of rear elevations of shops building and ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. Partial view of rear elevations of shops building and Hangar 1301 with rear elevation of corridor (behind power plant) connecting the hangar and shops building. Side elevations of shops and hangar as well as upper rear story of power plant and stack are visible, looking south southwest - Dover Air Force Base, Hangar No. 1301, Dover, Kent County, DE

  18. 61. August 1974. PAINT SHOP, VIEW LOOKING EAST. THE WINDOW ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    61. August 1974. PAINT SHOP, VIEW LOOKING EAST. THE WINDOW IS IN THE CENTER OF A SLIDING DOOR THAT OPENS ONTO THE PORCH AT THE EAST END OF THE ORIGINAL 1883 SHOP. THE DOOR WAS USED FOR HAULING THE WAGONS UP TO THE PAINT SHOP. - Gruber Wagon Works, Pennsylvania Route 183 & State Hill Road at Red Bridge Park, Bernville, Berks County, PA

  19. 2003 Sandia National Laboratories--Albuquerque Annual Illness and Injury Surveillance Report

    SciTech Connect

    U.S. Department of Energy, Office of Health, Safety and Security, Office of Illness and Injury Prevention Programs

    2007-05-23

    Annual Illness and Injury Surveillance Program report for 2003 for Sandia National Laboratories-Albuquerque. The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of epidemiologic surveillance activities that provide an early warning system for health problems among workers. The IISP monitors illnesses and health conditions that result in an absence of workdays, occupational injuries and illnesses, and disabilities and deaths among current workers.

  20. Description of piezometers installed in the Duranes well field area, Albuquerque, New Mexico

    USGS Publications Warehouse

    Thorn, C.R.

    1998-01-01

    Since 1993, the aquifer system in the Middle Rio Grande Basin, and particularly in the Albuquerque area, has been the focus of studies to further define the extent of the most productive parts of the aquifer and to gain a better understanding of ground-water/surface-water interactions. Twenty-one piezometers were installed during January and February 1997 at five sites in the Duranes well field area in Albuquerque, New Mexico, to allow for concentrated collection of hydraulic-head data. This concentrated collection of shallow hydraulic-head data may lead to a better understanding of the effects of ground-water production on the Rio Grande near a City of Albuquerque well field. Each piezometer was installed in a hole augered by a rig using hollow-stem auger flights. All piezometers are constructed of flush-joint polyvinyl chloride casing with 5-foot polyvinyl chloride screens. The uppermost 2 feet of the piezometer casing is covered by a steel casing with a locking lid. Driller's logs and geophysical logs were collected from the deepest hole and piezometer, respectively, at each site. This report describes the piezometers installed and presents initial water- level data for all piezometers.

  1. Opioid use in Albuquerque, New Mexico: a needs assessment of recent changes and treatment availability

    PubMed Central

    2014-01-01

    Background New Mexico has consistently high rates of drug-induced deaths, and opioid-related treatment admissions have been increasing over the last two decades. Youth in New Mexico are at particular risk: they report higher rates of nonmedical prescription opioid use than those over age 25, are more likely than their national counterparts to have tried heroin, and represent an increasing proportion of heroin overdoses. Methods Commissioned by the City of Albuquerque, semistructured interviews were conducted from April to June of 2011 with 24 substance use treatment agencies and eight key stakeholders in Albuquerque to identify recent changes in the treatment-seeking population and gaps in treatment availability. Themes were derived using template analysis and data were analyzed using NVivo 9 software. Results Respondents reported a noticeable increase in youth seeking treatment for opioid use and a general increase in nonmedical prescription opioid use. Most noted difficulties with finding buprenorphine providers and a lack of youth services. Additionally, stigma, limited interagency communication and referral, barriers to prescribing buprenorphine, and a lack of funding were noted as preventing opioid users from quickly accessing effective treatment. Conclusions Recommendations for addressing these issues include developing youth-specific treatment programs, raising awareness about opioid use among youth, increasing the availability of buprenorphine through provider incentives and education, developing a resource guide for individuals seeking treatment in Albuquerque, and prioritizing interagency communication and referrals. PMID:24942534

  2. Potential for a basin-centered gas accumulation in the Albuquerque Basin, New Mexico

    USGS Publications Warehouse

    Johnson, Ronald C.; Finn, Thomsa M.; Nuccio, Vito F.

    2001-01-01

    The potential that a basin-centered or continuous-type gas accumulation is present in the Albuquerque Basin in central New Mexico was investigated. The Albuquerque Basin is one of the many rift basins that make up the Rio Grand rift system, an area of active extension from Oligocene to recent time. The basin is significantly different from other Rocky Mountain basins that contain basin-centered gas accumulations because it is actively subsiding and is at near maximum burial and heating conditions at the present time. Burial reconstructions suggest that Cretaceous-age source rocks began to generate gas in the deeper parts of the basin about 20 million years ago and are still generating large amounts of gas. The high mud weights typically used while drilling the Cretaceous interval in the deeper areas of the basin suggest some degree of over-pressuring. Gas shows are commonly reported while drilling through the Cretaceous interval; however, attempts to complete gas wells in the Cretaceous have resulted in subeconomic quantities of gas, primarily because of low permeabilities. Little water has been reported. All of these characteristics suggest that a basin-centered gas accumulation of some sort is present in the Albuquerque Basin.

  3. Low-flow appliances and household water demand: an evaluation of demand-side management policy in Albuquerque, New Mexico.

    PubMed

    Price, James I; Chermak, Janie M; Felardo, Jeff

    2014-01-15

    Residential rebate programs for low-flow water devices have become increasingly popular as a means of reducing urban water demand. Although program specifics vary, low-flow rebates are available in most U.S. metropolitan areas, as well as in many smaller municipalities. Despite their popularity, few statistical analyses have been conducted regarding the effects of low-flow rebates on household water use. In this paper, we consider the effects of rebates from the Albuquerque Bernalillo County Water Utility Authority (ABCWUA). Using panel regression techniques with a database of rebate recipients, we estimate the marginal effects of various low-flow devices on household water demand. Results indicate a negative correlation between household water use and the presence of most low-flow devices, after controlling for water price and weather conditions. Low-flow toilets have the greatest impact on water use, while low-flow washing machines, dishwashers, showerheads, and xeriscape have smaller but significant effects. In contrast, air conditioning systems, hot water recirculators, and rain barrels have no significant impact on water use. We also test for possible rebound effects (i.e. whether low-flow appliances become less-effective over time due to poor rates of retention or behavioral changes) and compare the cost effectiveness of each rebate using levelised-costs. We find no evidence of rebound effects and substantial variation in levelised-costs, with low-flow showerheads being the most cost-effective device under the current ABCWUA rebate program. The latter result suggests that water providers can improve the efficiency of rebate programs by targeting the most cost-effective devices.

  4. Shopping. An Adult Competency Education Learning Module.

    ERIC Educational Resources Information Center

    Wallace, Virginia

    This instructional unit on shopping is one of six Adult Competency Education Learning Modules designed for use in a program of competency-based instruction for students with reading levels of 4.0-7.5. It is self-contained and designed for immediate classroom use. Each module is a complete instructional package, including Adult Performance Level…

  5. Industrial Arts Curriculum Guide for General Shop.

    ERIC Educational Resources Information Center

    Hubachek, Carl H.; And Others

    This curriculum guide for general shop courses is part of a series of curriculum guides for use in the industrial arts curriculum in Connecticut. The guide provides information on the scope and sequence of the industrial arts curriculum, specific guidelines for industrial arts, program goals and objectives, and guidelines concerning special…

  6. Planning Log for an Educational Shopping Center

    ERIC Educational Resources Information Center

    De Bernardis, Amo

    1975-01-01

    A chronology of the events leading up to the beginning of campus construction for the new Rock Creek Center of Portland Community College. All planning events from June 1968 to January 1976 are listed. The Center is designed as an educational shopping center that maximizes the college-community interface. (DC)

  7. Shop Steward Resistance in the Recession.

    ERIC Educational Resources Information Center

    Spencer, Bruce

    1985-01-01

    This article draws on work carried out in a British brewery, refutes the claim that the recession has made trade unions irrelevant to managerial concerns, and argues that cohesive, factor-based shop steward organization can resist a management onslaught. (Author/CT)

  8. Secret Shopping as User Experience Assessment Tool

    ERIC Educational Resources Information Center

    Boyce, Crystal M.

    2015-01-01

    Secret shopping is a form of unobtrusive evaluation that can be accomplished with minimal effort, but still produce rich results. With as few as 11 shoppers, the author was able to identify trends in user satisfaction with services provided across two entry-level desks at Illinois Wesleyan University's The Ames Library. The focus of this secret…

  9. Noise Levels In Missouri Vocational Agriculture Shops.

    ERIC Educational Resources Information Center

    Weston, Curtis R.; Stewart, Bob R.

    1980-01-01

    A study was conducted to provide data about noise levels as a potential health hazard for students and instructors involved in vocational agriculture shop operations in Missouri. The grinder and radial arm saw were determined to be potential noise problems if operated continuously for 15 minutes or longer. (LRA)

  10. Designing a Shopping System for Senior Citizens

    ERIC Educational Resources Information Center

    Roman, Harry T.

    2010-01-01

    It is all about serving the customer. That is how capitalism plays out. It finds a market need and then creates a product or service to address that need. The Baby Boomer generation, all 76 million, will be retiring soon. Eventually, some may find it very hard to move about and do their routine food shopping. In this article, the author's…

  11. Utah Integrated Shop Program. Final Report.

    ERIC Educational Resources Information Center

    Loveless, Austin G.

    To evaluate the Utah State Board of Education's Integrated Shop Program (ISP) for small rural high schools, 7 ISP schools in their 2nd year (1970-71) of the ISP were compared on 3 measures to 2 selected control schools (small rural high schools that offered vocational agricultural mechanics and industrial arts but did not offer formal courses in…

  12. The Anatomy of the Body Shop

    ERIC Educational Resources Information Center

    Nation's Schools, 1973

    1973-01-01

    Describes the Body Shop,'' a free-standing, 2-level physical education structure used by both boys and girls at Mundelein (Illinois) High School. The building is designed to displace a typical facility for limited activities; geared to the lifetime sports concept; and structured as a research orientation, tutoring, and practice center for an …

  13. Where Students Shop for Nutrition Facts.

    ERIC Educational Resources Information Center

    Teaching PreK-8, 1995

    1995-01-01

    Describes a school tour launched by a supermarket to familiarize children with basic facts about nutrition and healthful eating. Discusses visits to a perishable foods department, a shopping activity, a recipe preparation activity, and Food Pyramid activity. Suggests making enquiries about such tours with local supermarket chains and bringing it…

  14. Metrics, Lumber, and the Shop Teacher

    ERIC Educational Resources Information Center

    Craemer, Peter J.

    1978-01-01

    As producers of lumber are preparing to convert their output to the metric system, wood shop and building construction teachers must become familiar with the metric measurement language and methods. Manufacturers prefer the "soft conversion" process of changing English to metric units rather than hard conversion, or redimensioning of lumber. Some…

  15. Smart Shopping for Veggies and Fruits

    MedlinePlus

    ... Veggies and Fruits Print Share 10 TIPS NUTRITION EDUCATION SERIES Smart Shopping for Veggies and Fruits 10 tips for affordable vegetables and fruits It is possible to fit vegetables and fruits into any budget. Making nutritious choices does not have to hurt ...

  16. The Great Irish Head Shop Controversy

    ERIC Educational Resources Information Center

    Ryall, Graham; Butler, Shane

    2011-01-01

    This research describes and analyses recent policy developments in Ireland in relation to the practice of selling psychoactive substances which, while not themselves illegal, mimic the effects of commonly used illegal drugs. These so-called "legal highs" had been sold in Ireland through an increasing number of "head shops" which in late-2009 and…

  17. Performance Support on the Shop Floor.

    ERIC Educational Resources Information Center

    Kasvi, Jyrki J. J.; Vartiainen, Matti

    2000-01-01

    Discussion of performance support on the shop floor highlights four support systems for assembly lines that incorporate personal computer workstations in local area networks and use multimedia documents. Considers new customer-focused production paradigms; organizational learning; knowledge development; and electronic performance support systems…

  18. Online versus conventional shopping: consumers' risk perception and regulatory focus.

    PubMed

    van Noort, Guda; Kerkhof, Peter; Fennis, Bob M

    2007-10-01

    In two experiments, the impact of shopping context on consumers' risk perceptions and regulatory focus was examined. We predicted that individuals perceive an online (vs. conventional) shopping environment as more risky and that an online shopping environment, by its risky nature, primes a prevention focus. The findings in Study 1 demonstrate these effects by using self-report measures for risk perception and prevention focus. In Study 2, we replicated these findings and demonstrated that the effect of an online shopping environment carries over to behavior in a domain unrelated to shopping.

  19. Online versus conventional shopping: consumers' risk perception and regulatory focus.

    PubMed

    van Noort, Guda; Kerkhof, Peter; Fennis, Bob M

    2007-10-01

    In two experiments, the impact of shopping context on consumers' risk perceptions and regulatory focus was examined. We predicted that individuals perceive an online (vs. conventional) shopping environment as more risky and that an online shopping environment, by its risky nature, primes a prevention focus. The findings in Study 1 demonstrate these effects by using self-report measures for risk perception and prevention focus. In Study 2, we replicated these findings and demonstrated that the effect of an online shopping environment carries over to behavior in a domain unrelated to shopping. PMID:17927547

  20. Simulation of ground-water flow in the Albuquerque Basin, central New Mexico, 1901-95, with projections to 2020

    USGS Publications Warehouse

    Kernodle, J.M.

    1998-01-01

    The ground-water-flow model of the Albuquerque Basin (Kernodle, J.M., McAda, D.P., and Thorn, C.R., 1995, Simulation of ground-water flow in the Albuquerque Basin, central New Mexico, with projections to 2020: U.S. Geological Survey Water-Resources Investigations Report 94-4251, 114 p.) was updated to include new information on the hydrogeologic framework (Hawley, J.W., Haase, C.S., and Lozinsky, R.P., 1995, An underground view of the Albuquerque Basin: Proceedings of the 39th Annual New Mexico Water Conference, November 3-4, 1994, p. 37-55). An additional year of ground-water-withdrawal data was appended to the simulation of the historical period and incorporated into the base for future projections to the year 2020. The revised model projects the simulated ground-water levels associated with an aerally enlarged occurrence of the relatively high hydraulic conductivity in the upper part of the Santa Fe Group east and west of the Rio Grande in the Albuquerque area and north to Bernalillo. Although the differences between the two model versions are substantial, the revised model does not contradict any previous conclusions about the effect of City of Albuquerque ground-water withdrawals on flow in the Rio Grande or the net benefits of an effort to conserve ground water. Recent revisions to the hydrogeologic model (Hawley, J.W., Haneberg, W.C., and Whitworth, P.M., in press, Hydrogeologic investigations in the Albuquerque Basin, central New Mexico, 1992-1995: Socorro, New Mexico Bureau of Mines and Mineral Resources Open- File Report 402) of the Albuquerque Basin eventually will require that this model version also be revised and updated.

  1. Building a Successful Machine Safeguarding Program

    SciTech Connect

    McConnell, S

    2003-03-06

    Safeguarding hazards associated with machines is a goal common to all health and safety professionals. Whether the individual is new to the safety field or has held associated responsibilities for a period of time, safeguarding personnel who work with or around machine tools and equipment should be considered an important aspect of the job. Although significant progress has been made in terms of safeguarding machines since the era prior to the organized safety movement, companies continue to be cited by the Occupational Safety and Health Administration (OSHA) and workers continue to be injured, even killed by machine tools and equipment. In the early 1900s, it was common practice to operate transmission machinery (gears, belts, pulleys, shafting, etc.) completely unguarded. At that time, the countersunk set screw used on shafting had not been invented and projecting set screws were involved in many horrific accidents. Manufacturers built machines with little regard for worker safety. Workers were killed or seriously injured before definitive actions were taken to improve safety in the workplace. Many states adopted legislation aimed at requiring machine guarding and improved injury reduction. The first patent for a machine safeguard was issued in 1868 for a mechanical interlock. Other patents followed. As methods for safeguarding machinery and tools were developed, standards were written and programs were set up to monitor factories for compliance. Many of those standards continue to govern how we protect workers today. It is common to see machine tools built in the forties, fifties and sixties being used in machine shops today. In terms of safeguarding, these machines may be considered poorly designed, improperly safeguarded or simply unguarded. In addition to the potential threat of an OSHA citation, these conditions expose the operator to serious hazards that must be addressed. The safety professional can help line management determine workable solutions for

  2. Integrated online job-shop scheduling system

    NASA Astrophysics Data System (ADS)

    Zhao, Xing; Chen, Kuan H.; Luh, Peter B.; Chiueh, T. D.; Chang, ShihChang; Thakur, Lakshman S.

    1999-11-01

    The rapid development of information technology and e- commerce requires fast response form scheduling systems. Based on the Lagrangian relaxation approach for job shop scheduling, this paper present an integrated system that will generate schedules quickly. The Lagrangian relaxation approach is an iterative optimization process, where dynamic programming is solved in each iteration. Since dynamic programming is computational expensive especially for large problems, this paper develops the simplified dynamic programming, which will cut the computation time of each iteration by one order. Furthermore, a digital circuit to be embedded in PC is designed to implement the iterative optimization algorithm, leading to another order of speed improvement. The resulting integrated scheduling system consists of the hardware for optimization and the related software. It is estimated that two orders of magnitude gain in speed can be obtained, which will make on-line scheduling for practical job shops possible.

  3. RFID Data Cleaning for Shop Floor Applications

    NASA Astrophysics Data System (ADS)

    Ziekow, Holger; Ivantysynova, Lenka; Günter, Oliver

    In several case studies we found that shop-floor applications in manufacturing pose special challenges to cleaning RFID data. The underlying problem in many scenarios is the uncertainty about the exact location of observed RFID tags. Simple filter s provided in common middleware solutions do not cope well with these challenges. Therefore we have developed an approach based on maximum-likelihood estimation to infer a tag's location within the reader range. This enables improved RFID data cleaning in a number of application scenarios. We stress the benefits of our approach along exemplary application scenarios that we found in manufacturing. In simulations and experiments with real world data we show that our approach outperforms existing solutions. Our approach can extend RFID middleware or reader firmware, to improve the use of RFID in a range of shop-floor applications.

  4. Project DEEP STEAM: fourth meeting of the technical advisory panel, Albuquerque, NM, November 1980

    SciTech Connect

    Fox, R.L.; Donaldson, A.B.; Eisenhawer, S.W.; Hart, C.M.; Johnson, D.R.; Mulac, A.J.; Wayland, J.R.; Weirick, L.J.

    1981-07-01

    The Fourth Project DEEP STEAM Technical Advisory Panel Meeting was held on 5 and 6 November 1980 in Albuquerque, New Mexico, to review the status of project DEEP STEAM. This Proceedings, following the order of the meeting, is divided into five main sections: the injection string modification program, the downhole steam generator program, supporting activities, field testing, and the Advisory Panel recommendations and discussion. Each of the 17 presentations is summarized, and a final Discussion section has been added, when needed, for inclusion of comments and replies related to specific presentations. Finally, the Advisory Panel recommendations and the ensuing discussion are summarized in the closing section.

  5. Workout Machine

    NASA Technical Reports Server (NTRS)

    1995-01-01

    The Orbotron is a tri-axle exercise machine patterned after a NASA training simulator for astronaut orientation in the microgravity of space. It has three orbiting rings corresponding to roll, pitch and yaw. The user is in the middle of the inner ring with the stomach remaining in the center of all axes, eliminating dizziness. Human power starts the rings spinning, unlike the NASA air-powered system. Marketed by Fantasy Factory (formerly Orbotron, Inc.), the machine can improve aerobic capacity, strength and endurance in five to seven minute workouts.

  6. Tool force evaluation of lathe machined high explosives

    SciTech Connect

    Flowers, G.L.

    1980-04-01

    The purpose of this study was to develop a better understanding of the effects of machining properties upon tool forces encountered during lathe machining of high explosives, in order to optimize machining conditions for mechanical properties test specimens. Monetary considerations dictated that the tooling either already exist or be fabricated in-house using limited machine shop capability. The design chosen which fit between the tool holder and the tool post and interfaced to existing signal conditioners was easily fabricated. The study evaluated all forces on the cutter during machining of two types of high explosives at four cutter radii, four feed rates, three depths of cut and two cutting speeds. The study pointed out design problems, instrumentation drift, tool chatter and detection levels. It also showed that the type of high explosive was more significant than first thought toward influencing tool force levels.

  7. Flexible Job-Shop Scheduling with Dual-Resource Constraints to Minimize Tardiness Using Genetic Algorithm

    NASA Astrophysics Data System (ADS)

    Paksi, A. B. N.; Ma'ruf, A.

    2016-02-01

    In general, both machines and human resources are needed for processing a job on production floor. However, most classical scheduling problems have ignored the possible constraint caused by availability of workers and have considered only machines as a limited resource. In addition, along with production technology development, routing flexibility appears as a consequence of high product variety and medium demand for each product. Routing flexibility is caused by capability of machines that offers more than one machining process. This paper presents a method to address scheduling problem constrained by both machines and workers, considering routing flexibility. Scheduling in a Dual-Resource Constrained shop is categorized as NP-hard problem that needs long computational time. Meta-heuristic approach, based on Genetic Algorithm, is used due to its practical implementation in industry. Developed Genetic Algorithm uses indirect chromosome representative and procedure to transform chromosome into Gantt chart. Genetic operators, namely selection, elitism, crossover, and mutation are developed to search the best fitness value until steady state condition is achieved. A case study in a manufacturing SME is used to minimize tardiness as objective function. The algorithm has shown 25.6% reduction of tardiness, equal to 43.5 hours.

  8. Interferometric measuring system for cone inspection on shop-floor level

    NASA Astrophysics Data System (ADS)

    Grübler, Till; Drabarek, Pawel

    2015-05-01

    Small and precise cones are one of the most important functional surfaces for valve seats of today's modern common rail injection systems for Diesel engines. We have investigated two concepts of interferometric systems for industrial examination of small-size conical geometries: white-light-interferometer with an endoscopic probe and a special formmeasuring- machine with an interferometric stylus. Endoscopic probes are critical for small and deep drillings, and the optical layout becomes very complex and expensive. To increase the universality of small size cone measuring systems, we followed the concept of a special scanning form measuring machine using a single-measuring-point interferometric stylus. We have performed first measurements and repeatability tests on the shop floor. Based on standard capability evaluation (Cgk and Cg) we have achieved the following measuring system capabilities: angle T< 0.07°, roundness T<0.3 μm, Pt Value <0.3 μm.

  9. A branch-and-bound algorithm for makespan minimization in differentiation flow shops

    NASA Astrophysics Data System (ADS)

    Liu, Yen-Cheng; Fang, Kuei-Tang; Lin, Bertrand

    2013-12-01

    This article considers a differentiation flow-shop model, where the jobs are divided into various categories, each of which consists of two stages of operations. All products should be processed first on the single common machine at stage 1. At the second stage, each individual product proceeds to a dedicated machine according to its type. The problem of makespan minimization under the setting with two product types is known to be strongly NP hard. This article considers an arbitrary number of job types by developing a lower bound and two dominance rules, based upon which branch-and-bound algorithms are designed. Computational experiments are carried out to examine the performance of the proposed properties. The statistics show that the proposed properties can substantially reduce the computing efforts required for finding optimal solutions.

  10. Social image of students who shop and don't shop online.

    PubMed

    Lammers, H Bruce; Curren, Mary T; Cours, Deborah; Lammers, Marilyn L

    2003-06-01

    A descriptive survey of a stratified random sample of 326 undergraduates from a large, diverse university in Los Angeles was conducted to assess whether resistance to online shopping might be, in part, related to negative social perceptions of those who shop online. Indirect questioning showed that students perceived online student shoppers as more lazy and less likely to fear for the safety and security of others but also as more trustworthy, attractive, successful, and smart. Differences in social perceptions were not related to these students' own online spending. PMID:12841449

  11. View of book shop on elevator reboarding level Washington ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of book shop on elevator reboarding level - Washington Monument, High ground West of Fifteenth Street, Northwest, between Independence & Constitution Avenues, Washington, District of Columbia, DC

  12. Central of Georgia Railway, Savannah Repair Shops & Terminal Facilities, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Central of Georgia Railway, Savannah Repair Shops & Terminal Facilities, Combination Smokestack, Water Tank & Privies, Bounded by West Broad, Jones, West Boundary & Hull Streets, Savannah, Chatham County, GA

  13. Central of Georgia Railway, Savannah Repair Shops & Terminal Facilities, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Central of Georgia Railway, Savannah Repair Shops & Terminal Facilities, Brick Storage Vaults under Jones Street, Bounded by West Broad, Jones, West Boundary & Hull Streets, Savannah, Chatham County, GA

  14. Integration of RGB "Dust" Imagery to Operations at the Albuquerque Forecast Office

    NASA Technical Reports Server (NTRS)

    Fuell, Kevin; Guyer, Brian

    2014-01-01

    The NASA/Short-term Prediction, Research, and Transition (SPoRT) Program has been providing unique Red-Green-Blue (RGB) composite imagery to its operational partners since 2005. In the early years of activity these RGB products were related to a True Color RGB, showing what one's own eyes would see if looking down at earth from space, as well as a Snow-Cloud RGB (i.e. False Color), separating clouds from snow on the ground. More recently SPoRT has used the EUMETSAT Best Practices standards for RGB composites to transition a wide array of imagery for multiple uses. A "Dust" RGB product has had particular use at the Albuquerque, New Mexico WFO. Several cases have occurred where users were able to isolate dust plume locations for mesoscale and microscale events during day and night time conditions. In addition the "Dust" RGB can be used for more than just detection of dust as it is sensitive to the changes in density due to atmospheric moisture content. Hence low-level dry boundaries can often be discriminated. This type of imagery is a large change from the single channel imagery typically used by operational forecast staff and hence, can be a challenge to interpret. This presentation aims to discuss the integration of such new imagery into operational use as well as the benefits assessed by the Albuquerque WFO over several documented events.

  15. Machine Learning

    NASA Astrophysics Data System (ADS)

    Hoffmann, Achim; Mahidadia, Ashesh

    The purpose of this chapter is to present fundamental ideas and techniques of machine learning suitable for the field of this book, i.e., for automated scientific discovery. The chapter focuses on those symbolic machine learning methods, which produce results that are suitable to be interpreted and understood by humans. This is particularly important in the context of automated scientific discovery as the scientific theories to be produced by machines are usually meant to be interpreted by humans. This chapter contains some of the most influential ideas and concepts in machine learning research to give the reader a basic insight into the field. After the introduction in Sect. 1, general ideas of how learning problems can be framed are given in Sect. 2. The section provides useful perspectives to better understand what learning algorithms actually do. Section 3 presents the Version space model which is an early learning algorithm as well as a conceptual framework, that provides important insight into the general mechanisms behind most learning algorithms. In section 4, a family of learning algorithms, the AQ family for learning classification rules is presented. The AQ family belongs to the early approaches in machine learning. The next, Sect. 5 presents the basic principles of decision tree learners. Decision tree learners belong to the most influential class of inductive learning algorithms today. Finally, a more recent group of learning systems are presented in Sect. 6, which learn relational concepts within the framework of logic programming. This is a particularly interesting group of learning systems since the framework allows also to incorporate background knowledge which may assist in generalisation. Section 7 discusses Association Rules - a technique that comes from the related field of Data mining. Section 8 presents the basic idea of the Naive Bayesian Classifier. While this is a very popular learning technique, the learning result is not well suited for

  16. Charging machine

    DOEpatents

    Medlin, John B.

    1976-05-25

    A charging machine for loading fuel slugs into the process tubes of a nuclear reactor includes a tubular housing connected to the process tube, a charging trough connected to the other end of the tubular housing, a device for loading the charging trough with a group of fuel slugs, means for equalizing the coolant pressure in the charging trough with the pressure in the process tubes, means for pushing the group of fuel slugs into the process tube and a latch and a seal engaging the last object in the group of fuel slugs to prevent the fuel slugs from being ejected from the process tube when the pusher is removed and to prevent pressure liquid from entering the charging machine.

  17. Fullerene Machines

    NASA Technical Reports Server (NTRS)

    Globus, Al; Saini, Subhash

    1998-01-01

    Recent computational efforts at NASA Ames Research Center and computation and experiment elsewhere suggest that a nanotechnology of machine phase functionalized fullerenes may be synthetically accessible and of great interest. We have computationally demonstrated that molecular gears fashioned from (14,0) single-walled carbon nanotubes and benzyne teeth should operate well at 50-100 gigahertz. Preliminary results suggest that these gears can be cooled by a helium atmosphere and a laser motor can power fullerene gears if a positive and negative charge have been added to form a dipole. In addition, we have unproven concepts based on experimental and computational evidence for support structures, computer control, a system architecture, a variety of components, and manufacture. Combining fullerene machines with the remarkable mechanical properties of carbon nanotubes, there is some reason to believe that a focused effort to develop fullerene nanotechnology could yield materials with tremendous properties.

  18. Induction machine

    DOEpatents

    Owen, Whitney H.

    1980-01-01

    A polyphase rotary induction machine for use as a motor or generator utilizing a single rotor assembly having two series connected sets of rotor windings, a first stator winding disposed around the first rotor winding and means for controlling the current induced in one set of the rotor windings compared to the current induced in the other set of the rotor windings. The rotor windings may be wound rotor windings or squirrel cage windings.

  19. A New Look for the Shopping Mall

    NASA Technical Reports Server (NTRS)

    1985-01-01

    STRUCTO-FAB, a product of Owens-Corning Fiberglas Corporation, is a lightweight but extremely durable tent-like material made of Fiberglas coated with Teflon. It transmits daylight with a reduced need for artificial lighting. It is an outgrowth of a material formulated by NASA in 1967 as a new space suit fabric. Owens-Corning and DuPont provided the original material, which was the basis for Structo-Fab, a permanent architectural fabric used for shopping malls, sports stadiums, etc.

  20. Verification Tools Secure Online Shopping, Banking

    NASA Technical Reports Server (NTRS)

    2010-01-01

    Just like rover or rocket technology sent into space, the software that controls these technologies must be extensively tested to ensure reliability and effectiveness. Ames Research Center invented the open-source Java Pathfinder (JPF) toolset for the deep testing of Java-based programs. Fujitsu Labs of America Inc., based in Sunnyvale, California, improved the capabilities of the JPF Symbolic Pathfinder tool, establishing the tool as a means of thoroughly testing the functionality and security of Web-based Java applications such as those used for Internet shopping and banking.

  1. Learn and Shop: An Innovation in College Credit Programming.

    ERIC Educational Resources Information Center

    East, James R.; McKelvey, Paul T.

    1981-01-01

    In 1979, Indiana University-Purdue University at Indianapolis launched the nation's first Learn and Shop College Credit Program in which college-credit courses are offered in training rooms of major department stores in suburban shopping centers. This program is described and student attitudes are discussed. (Author/MLW)

  2. RUNNER BOXES IN CASTING SHOP MAINTENANCE AREA. THE SECTION OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    RUNNER BOXES IN CASTING SHOP MAINTENANCE AREA. THE SECTION OF THE PLANT SHOWN IN THE BACKGROUND FORMERLY HOUSED SMALL BRASS AND COPPER FURNACES THAT POURED APPROXIMATLEY 3500 LBS. ROUND BILLETS USED IN THE TUBE SHOP. - American Brass Foundry, 70 Sayre Street, Buffalo, Erie County, NY

  3. Teaching Geology on Weekends and at Shopping Centers.

    ERIC Educational Resources Information Center

    Mirsky, Arthur; East, James R.

    1981-01-01

    The success of an outreach education program held by Indiana University-Purdue University at Indianapolis is described. The college offers regular credit courses on Saturday and Sunday for people who could not take regularly scheduled courses. A Learn and Shop program held at shopping centers is also described. (JT)

  4. 5. NORTHEASTERN VIEW OF THE CARPENTER SHOP (CENTER LEFT), AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. NORTHEASTERN VIEW OF THE CARPENTER SHOP (CENTER LEFT), AND PATTERN STORAGE BUILDING (CENTER RIGHT). PARTIAL VIEW OF THE 21 MILL INSPECTION BUILDING IN THE FOREGROUND TO THE RIGHT. - U.S. Steel Duquesne Works, Auxiliary Buildings & Shops, Along Monongahela River, Duquesne, Allegheny County, PA

  5. 45. July 1974. BLACKSMITH SHOP, VIEW LOOKING NORTHEAST, SHOWING BELT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    45. July 1974. BLACKSMITH SHOP, VIEW LOOKING NORTHEAST, SHOWING BELT CHASE FOR TWO BELTS FROM THE BASEMENT, THE W. E. & J. BARNES CO. DRILL PRESS, AND THE DRILL PRESS USED FOR REAMING. THE BELT PASSING THROUGH THE WALL POWERS THE SANDER IN THE WOOD SHOP. - Gruber Wagon Works, Pennsylvania Route 183 & State Hill Road at Red Bridge Park, Bernville, Berks County, PA

  6. Putting it All Together: Has One-Stop Shopping Arrived?

    ERIC Educational Resources Information Center

    Flanagan, Patrick

    1997-01-01

    Reviews the current state of "one-stop shopping" for telecom services. Discusses regulatory obstacles; administrative problems with single billing; and resistance of telecom providers to change. Concludes that the leading one-stop shopping providers will be individual carriers who offer cost savings. (AEF)

  7. Looking north toward Locomotive Shop (2 tracks on left), Car ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Looking north toward Locomotive Shop (2 tracks on left), Car Shop on right, and flat car in foreground. Note locomotive and car tires leaning on stock shed at left - East Broad Top Railroad & Coal Company, State Route 994, West of U.S. Route 522, Rockhill Furnace, Huntingdon County, PA

  8. 45 CFR 155.705 - Functions of a SHOP.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Public Welfare Department of Health and Human Services REQUIREMENTS RELATING TO HEALTH CARE ACCESS... Functions: Small Business Health Options Program (SHOP) § 155.705 Functions of a SHOP. (a) Exchange... documented assessment of the full landscape of the small group market in his or her State, that...

  9. View south of hydraulic hammer in boilermakers shop (probably the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View south of hydraulic hammer in boilermakers shop (probably the oldest piece of equipment in the yard, originally powered by steam) nameplate: United Engineers and FDRY. Co. Pittsburgh, Pa, USA Davy Brothers LTD. Patents - Aug 1, 1905, Feb, 1901, Sept 8, 1908 - 10000 lbs. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Structure Shop, League Island, Philadelphia, Philadelphia County, PA

  10. Urban Studies Workshop. Shopping Centre Study. Rockfort, Illinois.

    ERIC Educational Resources Information Center

    Vandenhazel, Bessel J.

    The urban environment itself can be a laboratory for learning, and the learning activities in this workbook utilize the shopping center as a study site. General objectives of this unit of study are (1) to investigate how shopping centers serve the community; (2) to integrate a number of curriculum skills and concepts; and (3) to investigate the…

  11. 24. Historic View, Building 104 Structural Shop Extension. View east, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    24. Historic View, Building 104 Structural Shop Extension. View east, north side, 1939. Photocopy of photo. U.S.Navy/NPS Archives, Charlestown Navy Yard. - Charlestown Navy Yard, Shipfitters' Shop, Southeast side of First Avenue between Ninth & Thirteenth Streets, Boston, Suffolk County, MA

  12. DISTANT VIEW, AUTOMOTIVE REPAIR SHOP ON LEFT AND UTILITY BUILDING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DISTANT VIEW, AUTOMOTIVE REPAIR SHOP ON LEFT AND UTILITY BUILDING "B" ON RIGHT. HOSE WINDING SHED ADJACENT TO SHED-ROOFED ADDITION ON THE UTILITY BUILDING, BLM SEED SHED AND TACK SHED VISIBLE IN FAR DISTANCE. VIEW TO EAST/ - Cedar City Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

  13. DISTANCE VIEW, AUTOMOTIVE REPAIR SHOP ON LEFT AND UTILITY BUILDING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DISTANCE VIEW, AUTOMOTIVE REPAIR SHOP ON LEFT AND UTILITY BUILDING "B" ON RIGHT. HOSE WINDING SHED ADJACENT TO SHED-ROOFED ADDITION ON THE UTILITY BUILDING, BLM SEED SHED AND TACK SHED VISIBLE IN FAR DISTANCE. VIEW TO EAST, WITH SCALE. - Cedar City Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

  14. 6. Detail, plat of Carlin Shops, 1884. Copied from Central ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. Detail, plat of Carlin Shops, 1884. Copied from Central Pacific Railroad bound book of station plats entitled 'Station Plans, CPRR, Mill City to Ogden,' in collection of Nevada Historical Society, Reno; credit Nevada Historical Society. Engine Stores Building is shown as building k. - Southern Pacific Railroad, Carlin Shops, Foot of Sixth Street, Carlin, Elko County, NV

  15. Overview of Boiler House and Sheet Metal and Electrical Shops ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Overview of Boiler House and Sheet Metal and Electrical Shops Building (center - with single large chimney), note the monitor on the original section of the Boiler House Building, view facing north - Kahului Cannery, Plant No. 28, Boiler House, Sheet Metal and Electrical Shops, 120 Kane Street, Kahului, Maui County, HI

  16. 45 CFR 155.715 - Eligibility determination process for SHOP.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Affordable Care Act. (d) Eligibility adjustment period. (1) When the information submitted on the SHOP single... HEALTH CARE ACCESS EXCHANGE ESTABLISHMENT STANDARDS AND OTHER RELATED STANDARDS UNDER THE AFFORDABLE CARE ACT Exchange Functions: Small Business Health Options Program (SHOP) § 155.715...

  17. 45 CFR 155.715 - Eligibility determination process for SHOP.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Affordable Care Act. (d) Eligibility adjustment period. (1) When the information submitted on the SHOP single... HEALTH CARE ACCESS EXCHANGE ESTABLISHMENT STANDARDS AND OTHER RELATED STANDARDS UNDER THE AFFORDABLE CARE ACT Exchange Functions: Small Business Health Options Program (SHOP) § 155.715...

  18. 45. ANOTHER VIEW OF THE LOW CEILING SHOP AREA, LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    45. ANOTHER VIEW OF THE LOW CEILING SHOP AREA, LOOKING WEST ALONG THE SOUTH WALL. THE DOOR AT THE FAR LEFT APPEARS IN VIEW NO. CA-295-A-15. - United Engineering Company Shipyard, Inspection & Repair Shops, 2900 Main Street, Alameda, Alameda County, CA

  19. 48 CFR 1952.227-77 - Rights in shop drawings.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Rights in shop drawings. 1952.227-77 Section 1952.227-77 Federal Acquisition Regulations System BROADCASTING BOARD OF GOVERNORS... Rights in shop drawings. As prescribed in 1927.405(h), insert the following clause: Rights in...

  20. Experimental Development and Evaluation of a Shop Safety Attitude Scale.

    ERIC Educational Resources Information Center

    Bettis, Mervin Dale

    The purpose of this study was to develop and evaluate a shop safety attitude scale that could be administered at the beginning of a shop course to help identify students who may be accident repeaters. A semantic differential scale was adapted from one originated by Osgood and his associates (1964) and administered to a sample of 125 university…

  1. INTERIOR VIEW OF WESTERN ROOM OF PAINT SHOP PORTION OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW OF WESTERN ROOM OF PAINT SHOP PORTION OF BUILDING, FACING NORTHWEST, TOWARDS NON-FUNCTIONAL FOLDING BAY DOOR - Vancouver Barracks, Paint Shop and Central Heating Plant, East Fifth Street southeast of McLoughlin Road, Vancouver, Clark County, WA

  2. Basic Irish for Shopping = BunGhaeilge don Siopa.

    ERIC Educational Resources Information Center

    Linguistics Inst. of Ireland, Dublin.

    Basic Irish phrases and vocabulary useful for shopping are presented in dialogue form in an illustrated phrasebook. The book offers simple sentences and alternative terms for personal greetings, comments on the weather, grocery shopping, paying for goods, writing a check or using a credit card, and partings. Additional lists of vocabulary for…

  3. 12. LOWER LEVEL OF EAST BUILDING (PAINT SHOP) LOOKING SOUTH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. LOWER LEVEL OF EAST BUILDING (PAINT SHOP) LOOKING SOUTH TO RIVER NOTE; GROWN SHIP KNEES AT POSTS TO SUPPORT BEAMS. LOLLY COLUMNS ADDED TO SUPPORT SAGGING BEAM. LATRINE AND STAIRS TO STREET LEVEL CAN BE SEEN AT RIGHT. - Lowell's Boat Shop, 459 Main Street, Amesbury, Essex County, MA

  4. BENDING SHOP & OVEN. United Engineering Co., Alameda, California. Plan, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    BENDING SHOP & OVEN. United Engineering Co., Alameda, California. Plan, two elevations, sections, and details. Alben Froberg, Architect, Oakland, California. Sheet no. 1 of 1. Various scales. December 15, 1941. pencil on tracing paper - United Engineering Company Shipyard, Bending Shop & Oven, 2900 Main Street, Alameda, Alameda County, CA

  5. A&M. TAN607. Process experimental pilot plant (PREPP) in north machine ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    A&M. TAN-607. Process experimental pilot plant (PREPP) in north machine shop of TAN-607. First floor plan shows kiln area, internal room dividers, air locks, and other features integrated within TAN-607. Ralph M. Parsons A-2. Date: February 1984. INEEL index no. 034-0607-00-693-147021 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

  6. MTR WING A, TRA604, INTERIOR. MAIN FLOOR. DETAILS OF MACHINE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MTR WING A, TRA-604, INTERIOR. MAIN FLOOR. DETAILS OF MACHINE SHOP. CAMERA FACING SOUTH. INL NEGATIVE NO. HD46-31-2. Mike Crane, Photographer, 2/2005 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

  7. MACHINE TOOL OPERATOR--GENERAL, ENTRY, SUGGESTED GUIDE FOR A TRAINING COURSE.

    ERIC Educational Resources Information Center

    RONEY, MAURICE W.; AND OTHERS

    THE PURPOSE OF THIS CURRICULUM GUIDE IS TO ASSIST THE ADMINISTRATOR AND INSTRUCTOR IN PLANNING AND DEVELOPING MANPOWER DEVELOPMENT AND TRAINING PROGRAMS TO PREPARE MACHINE TOOL OPERATORS FOR ENTRY-LEVEL POSITIONS. THE COURSE OUTLINE PROVIDES UNITS IN -- (1) ORIENTATION, (2) BENCH WORK, (3) SHOP MATHEMATICS, (4) BLUEPRINT READING AND SKETCHING, (5)…

  8. How Traumatic Violence Permanently Changes Shopping Behavior.

    PubMed

    Sigirci, Ozge; Rockmore, Marc; Wansink, Brian

    2016-01-01

    Traumatic experiences - such as combat, living in a conflict country or war-torn nation, or experiencing a violent crime or natural disaster - change social relationships and may also influence a life-time of consumer relationships with brands and shopping. Our focus on this previously overlooked area is centered on an analysis of the long-term shopping habits of 355 combat veterans. We show that those who experienced heavy trauma (e.g., heavy combat) exhibited similar disconnection from brands as others have experienced in social relationships. They became more transactional in that they were more open to switching brands, to trying new products, and buying the least expensive alternative (p < 0.01). In contrast, those who had experienced a light trauma were more influenced by ads and more open to buying brands even when they cost more (p < 0.00). Trauma, such as combat, may change one's decision horizon. Functionality and price become more important, which is consistent with the idea that they are more focused on the present moment than on building on the past or saving for the future.

  9. How Traumatic Violence Permanently Changes Shopping Behavior

    PubMed Central

    Sigirci, Ozge; Rockmore, Marc; Wansink, Brian

    2016-01-01

    Traumatic experiences – such as combat, living in a conflict country or war-torn nation, or experiencing a violent crime or natural disaster – change social relationships and may also influence a life-time of consumer relationships with brands and shopping. Our focus on this previously overlooked area is centered on an analysis of the long-term shopping habits of 355 combat veterans. We show that those who experienced heavy trauma (e.g., heavy combat) exhibited similar disconnection from brands as others have experienced in social relationships. They became more transactional in that they were more open to switching brands, to trying new products, and buying the least expensive alternative (p < 0.01). In contrast, those who had experienced a light trauma were more influenced by ads and more open to buying brands even when they cost more (p < 0.00). Trauma, such as combat, may change one’s decision horizon. Functionality and price become more important, which is consistent with the idea that they are more focused on the present moment than on building on the past or saving for the future. PMID:27656152

  10. How Traumatic Violence Permanently Changes Shopping Behavior.

    PubMed

    Sigirci, Ozge; Rockmore, Marc; Wansink, Brian

    2016-01-01

    Traumatic experiences - such as combat, living in a conflict country or war-torn nation, or experiencing a violent crime or natural disaster - change social relationships and may also influence a life-time of consumer relationships with brands and shopping. Our focus on this previously overlooked area is centered on an analysis of the long-term shopping habits of 355 combat veterans. We show that those who experienced heavy trauma (e.g., heavy combat) exhibited similar disconnection from brands as others have experienced in social relationships. They became more transactional in that they were more open to switching brands, to trying new products, and buying the least expensive alternative (p < 0.01). In contrast, those who had experienced a light trauma were more influenced by ads and more open to buying brands even when they cost more (p < 0.00). Trauma, such as combat, may change one's decision horizon. Functionality and price become more important, which is consistent with the idea that they are more focused on the present moment than on building on the past or saving for the future. PMID:27656152

  11. How Traumatic Violence Permanently Changes Shopping Behavior

    PubMed Central

    Sigirci, Ozge; Rockmore, Marc; Wansink, Brian

    2016-01-01

    Traumatic experiences – such as combat, living in a conflict country or war-torn nation, or experiencing a violent crime or natural disaster – change social relationships and may also influence a life-time of consumer relationships with brands and shopping. Our focus on this previously overlooked area is centered on an analysis of the long-term shopping habits of 355 combat veterans. We show that those who experienced heavy trauma (e.g., heavy combat) exhibited similar disconnection from brands as others have experienced in social relationships. They became more transactional in that they were more open to switching brands, to trying new products, and buying the least expensive alternative (p < 0.01). In contrast, those who had experienced a light trauma were more influenced by ads and more open to buying brands even when they cost more (p < 0.00). Trauma, such as combat, may change one’s decision horizon. Functionality and price become more important, which is consistent with the idea that they are more focused on the present moment than on building on the past or saving for the future.

  12. Amber Plug-In for Protein Shop

    2004-05-10

    The Amber Plug-in for ProteinShop has two main components: an AmberEngine library to compute the protein energy models, and a module to solve the energy minimization problem using an optimization algorithm in the OPTI-+ library. Together, these components allow the visualization of the protein folding process in ProteinShop. AmberEngine is a object-oriented library to compute molecular energies based on the Amber model. The main class is called ProteinEnergy. Its main interface methods are (1) "init"more » to initialize internal variables needed to compute the energy. (2) "eval" to evaluate the total energy given a vector of coordinates. Additional methods allow the user to evaluate the individual components of the energy model (bond, angle, dihedral, non-bonded-1-4, and non-bonded energies) and to obtain the energy of each individual atom. The Amber Engine library source code includes examples and test routines that illustrate the use of the library in stand alone programs. The energy minimization module uses the AmberEngine library and the nonlinear optimization library OPT++. OPT++ is open source software available under the GNU Lesser General Public License. The minimization module currently makes use of the LBFGS optimization algorithm in OPT++ to perform the energy minimization. Future releases may give the user a choice of other algorithms available in OPT++.« less

  13. Effects of Website Interactivity on Online Retail Shopping Behavior

    NASA Astrophysics Data System (ADS)

    Islam, Hafizul

    Motivations to engage in retail online shopping can include both utilitarian and hedonic shopping dimensions. To cater to these consumers, online retailers can create a cognitively and esthetically rich shopping environment, through sophisticated levels of interactive web utilities and features, offering not only utilitarian benefits and attributes but also providing hedonic benefits of enjoyment. Since the effect of interactive websites has proven to stimulate online consumer’s perceptions, this study presumes that websites with multimedia rich interactive utilities and features can influence online consumers’ shopping motivations and entice them to modify or even transform their original shopping predispositions by providing them with attractive and enhanced interactive features and controls, thus generating a positive attitude towards products and services offered by the retailer. This study seeks to explore the effects of Web interactivity on online consumer behavior through an attitudinal model of technology acceptance.

  14. The Customer Rules and Other e-Shopping Myths

    NASA Astrophysics Data System (ADS)

    McLean, Rachel; Richardson, Helen

    This chapter discusses self-service and the Internet in the context of two studies, based in the UK, and undertaken during 1998-2005. They are united by a common framework of critically analysing discourses of e-shopping in the ‘ digital age ’. Firstly, myths surrounding e-shopping are deconstructed with a view to analysing the ‘sovereign consumer’ and the e-shopping experience. The second study considers home e-shopping in the UK. In an atmosphere where we are urged to engage with ICTs (information communication technologies) in all spheres of our lives, the domestication of ICTs necessitates consideration of the gendered family in gendered households. In conclusion, we argue those self-service aspects of e-shopping are not signs of empowerment and self-determination. The notion of the sovereign consumer exercising power and control globally is an enduring myth.

  15. 77 FR 8926 - Board Meeting: March 7, 2012-Albuquerque, NM; The U.S. Nuclear Waste Technical Review Board Will...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-15

    ... From the Federal Register Online via the Government Publishing Office NUCLEAR WASTE TECHNICAL REVIEW BOARD Board Meeting: March 7, 2012--Albuquerque, NM; The U.S. Nuclear Waste Technical Review Board... authority under section 5051 of Public Law 100-203, the Nuclear Waste Technical Review Board will hold...

  16. Stormwater Management for TMDLs in an Arid Climate: A Case Study Application of SUSTAIN in Albuquerque, New Mexico - report

    EPA Science Inventory

    This case study for the Albuquerque, New Mexico area was conducted under contract with the U.S. Environmental Protection Agency (EPA) Office of Research and Development using the System for Urban Stormwater Treatment and Integration Analysis (SUSTAIN). The effort focuses on inve...

  17. Service Networks and Patterns of Utilization: Mental Health Programs, Indian Health Service (IHS). Volume 4: Albuquerque Area, 1966-1973.

    ERIC Educational Resources Information Center

    Attneave, Carolyn L.; Beiser, Morton

    The fourth volume in a 10-volume report on the historical development (1966-1973) of the 8 administrative Area Offices of the Indian Health Service (IHS) Mental Health Programs, this report presents information on the Albuquerque Area Office. Included in this report are: (1) The Context (geographic distribution; IHS facilities; population served;…

  18. Proceedings of the 1978 National Conference on Technology for Energy Conservation (Albuquerque, New Mexico, January 24-27, 1978).

    ERIC Educational Resources Information Center

    Information Transfer, Inc., Rockville, MD.

    This publication contains the proceedings of the National Conference on Technology for Energy Conservation held in January 1978, in Albuquerque, New Mexico. The 112 papers included are organized under the following topics: (1) Legal Considerations; (2) Energy from Biomass; (3) Energy Conservation in Agriculture; (4) Status of Energy Conservation;…

  19. Water-table map of the San Jose well field and vicinity, Albuquerque, New Mexico, spring 1981

    USGS Publications Warehouse

    Hudson, J.D.

    1982-01-01

    Water samples taken from Albuquerque 's San Jose well field during 1980 contained several undesireable organic compounds. An investigation defined the configuration of the water table in the vicinity of these wells. This map shows the direction of ground-water movement and in selecting test wells for water-quality sampling. (USGS)

  20. Explosive Components Facility at Sandia National Laboratories, Albuquerque, New Mexico. Environmental assessment

    SciTech Connect

    Not Available

    1992-07-01

    The United States Department of Energy (DOE) has prepared an environmental assessment (EA) on the proposed Explosive Components Facility (ECF) at the Sandia National Laboratories, Albuquerque (SNL). This facility is needed to integrate, centralize, and enhance many of the explosive, neutron generation, and weapons testing programs currently in progress at SNL. In general, there is insufficient space in existing facilities for the development and testing activities required by modern explosives technologies. The EA examined the potential environmental impacts of the proposed ECF project and discussed potential alternatives. Based on the analyses in the EA, DOE has determined that the proposed action does not constitute a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969, and CEQ regulations at 40 CFR 1508.18 and 1508.27. Therefore, an environmental impact statement (EIS) is not required, and the DOE is issuing this Finding of No Significant Impact (FONSI).

  1. Calendar year 2004 annual site environmental report:Sandia National Laboratories, Albuquerque, New Mexico.

    SciTech Connect

    Montoya, Amber L.; Goering, Teresa Lynn; Wagner, Katrina; Koss, Susan I.; Salinas, Stephanie A.

    2005-09-01

    Sandia National Laboratories, New Mexico (SNL/NM) is a government-owned, contractor-operated facility owned by the U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA) and managed by the Sandia Site Office (SSO), Albuquerque, New Mexico. Sandia Corporation, a wholly-owned subsidiary of Lockheed Martin Corporation, operates SNL/NM. This annual report summarizes data and the compliance status of Sandia Corporation's environmental protection and monitoring programs through December 31, 2004. Major environmental programs include air quality, water quality, groundwater protection, terrestrial surveillance, waste management, pollution prevention (P2), environmental restoration (ER), oil and chemical spill prevention, and the National Environmental Policy Act (NEPA). Environmental monitoring and surveillance programs are required by DOE Order 450.1, Environmental Protection Program (DOE 2005) and DOE Order 231.1A, Environment, Safety, and Health Reporting (DOE 2004a). (DOE 2004a).

  2. Verification testing of the PKI collector at Sandia National Laboratories, Albuquerque, New Mexico

    NASA Technical Reports Server (NTRS)

    Hauger, J. S.; Pond, S. L.

    1982-01-01

    Verification testing of a solar collector was undertaken prior to its operation as part of an industrial process heat plant at Capitol Concrete Products in Topeka, Kansas. Testing was performed at a control plant installed at Sandia National Laboratory, Albuquerque, New Mexico (SNLA). Early results show that plant performance is even better than anticipated and far in excess of test criteria. Overall plant efficiencies of 65 to 80 percent were typical during hours of good insolation. A number of flaws and imperfections were detected during operability testing, the most important being a problem in elevation drive alignment due to a manufacturing error. All problems were corrected as they occurred and the plant, with over 40 hours of operation, is currently continuing operability testing in a wholly-automatic mode.

  3. Surface-wave and refraction tomography at the FACT Site, Sandia National Laboratories, Albuquerque, New Mexico.

    SciTech Connect

    Abbott, Robert E.; Bartel, Lewis Clark; Pullammanappallil, Satish; Engler, Bruce Phillip

    2006-08-01

    We present a technique that allows for the simultaneous acquisition and interpretation of both shear-wave and compressive-wave 3-D velocities. The technique requires no special seismic sources or array geometries, and is suited to studies with small source-receiver offsets. The method also effectively deals with unwanted seismic arrivals by using the statistical properties of the data itself to discriminate against spurious picks. We demonstrate the technique with a field experiment at the Facility for Analysis, Calibration, and Testing at Sandia National Laboratories, Albuquerque, New Mexico. The resulting 3-D shear-velocity and compressive-velocity distributions are consistent with surface geologic mapping. The averaged velocities and V{sub p}/V{sub s} ratio in the upper 30 meters are also consistent with examples found in the scientific literature.

  4. Core drilling provides information about Santa Fe Group aquifer system beneath Albuquerque's West Mesa

    USGS Publications Warehouse

    Allen, B.D.; Connell, S.D.; Hawley, J.W.; Stone, B.D.

    1998-01-01

    Core samples from the upper ???1500 ft of the Santa Fe Group in the Albuquerque West Mesa area provide a first-hand look at the sediments and at subsurface stratigraphic relationships in this important part of the basin-fill aquifer system. Two major hydrostratigraphic subunits consisting of a lower coarse-grained, sandy interval and an overlying fine-grained, interbedded silty sand and clay interval lie beneath the water table at the 98th St core hole. Borehole electrical conductivity measurements reproduce major textural changes observed in the recovered cores and support subsurface correlations of hydrostratigraphic units in the Santa Fe Group aquifer system based on geophysical logs. Comparison of electrical logs from the core hole and from nearby city wells reveals laterally consistent lithostratigraphic patterns over much of the metropolitan area west of the Rio Grande that may be used to delineate structural and related stratigraphic features that have a direct bearing on the availability of ground water.

  5. Electrical machine

    DOEpatents

    De Bock, Hendrik Pieter Jacobus; Alexander, James Pellegrino; El-Refaie, Ayman Mohamed Fawzi; Gerstler, William Dwight; Shah, Manoj Ramprasad; Shen, Xiaochun

    2016-06-21

    An apparatus, such as an electrical machine, is provided. The apparatus can include a rotor defining a rotor bore and a conduit disposed in and extending axially along the rotor bore. The conduit can have an annular conduit body defining a plurality of orifices disposed axially along the conduit and extending through the conduit body. The rotor can have an inner wall that at least partially defines the rotor bore. The orifices can extend through the conduit body along respective orifice directions, and the rotor and conduit can be configured to provide a line of sight along the orifice direction from the respective orifices to the inner wall.

  6. TEMPO machine

    SciTech Connect

    Rohwein, G.J.; Lancaster, K.T.; Lawson, R.N.

    1986-06-01

    TEMPO is a transformer powered megavolt pulse generator with an output pulse of 100 ns duration. The machine was designed for burst mode operation at pulse repetition rates up to 10 Hz with minimum pulse-to-pulse voltage variations. To meet the requirement for pulse duration a nd a 20-..omega.. output impedance within reasonable size constraints, the pulse forming transmission line was designed as two parallel water-insulated, strip-type Blumleins. Stray capacitance and electric fields along the edges of the line elements were controlled by lining the tank with plastic sheet.

  7. Paleoearthquake recurrence on the East Paradise fault zone, metropolitan Albuquerque, New Mexico

    USGS Publications Warehouse

    Personius, Stephen F.; Mahan, Shannon

    2000-01-01

    A fortuitous exposure of the East Paradise fault zone near Arroyo de las Calabacillas has helped us determine a post-middle Pleistocene history for a long-forgotten Quaternary fault in the City of Albuquerque, New Mexico. Mapping of two exposures of the fault zone allowed us to measure a total vertical offset of 2.75 m across middle Pleistocene fluvial and eolian deposits and to estimate individual surface-faulting events of about 1, 0.5, and 1.25 m. These measurements and several thermoluminescence ages allow us to calculate a long-term average slip rate of 0.01 ± 0.001 mm/yr and date two surface-faulting events to 208 ± 25 ka and 75 ± 7 ka. The youngest event probably occurred in the late Pleistocene, sometime after 75 ± 7 ka. These data yield a single recurrence interval of 133 ± 26 ka and an average recurrence interval of 90 ± 10 ka. However, recurrence intervals are highly variable because the two youngest events occurred in less than 75 ka. Offsets of 0.5-1.25 m and a fault length of 13-20 km indicate that surface-rupturing paleoearthquakes on the East Paradise fault zone had probable Ms or Mw magnitudes of 6.8-7.0. Although recurrence intervals are long on the East Paradise fault zone, these data are significant because they represent some of the first published slip rate, paleoearthquake magnitude, and recurrence information for any of the numerous Quaternary faults in the rapidly growing Albuquerque-Rio Rancho metropolitan area.

  8. Ultrasonic interface level analyzer shop test procedure

    SciTech Connect

    STAEHR, T.W.

    1999-05-24

    The Royce Instrument Corporation Model 2511 Interface Level Analyzer (URSILLA) system uses an ultrasonic ranging technique (SONAR) to measure sludge depths in holding tanks. Three URSILLA instrument assemblies provided by the W-151 project are planned to be used during mixer pump testing to provide data for determining sludge mobilization effectiveness of the mixer pumps and sludge settling rates. The purpose of this test is to provide a documented means of verifying that the functional components of the three URSILLA instruments operate properly. Successful completion of this Shop Test Procedure (STP) is a prerequisite for installation in the AZ-101 tank. The objective of the test is to verify the operation of the URSILLA instruments and to verify data collection using a stand alone software program.

  9. Mining machine

    SciTech Connect

    Becker, H.R.

    1984-12-04

    A mining machine is disclosed comprising a mobile base and a cutting head assembly at a forward end of the mobile base having a cutter drum rotatable about an output shaft disposed along the longitudinal axis of the cutter drum. A drive system for the cutting head assembly comprises at least one motor for driving at least one toothed motor pinion and a generally cylindrical combination gear having generally circular end surfaces. A bevel or face gear is formed in at least one of the end surfaces, having teeth adapted to mate with and be driven by the toothed motor pinion. The combination gear has a worm gear formed in the outside cylindrical surface, which is disposed in driving engagement with the teeth of an output gear integrally and coaxially connected to the output shaft of the cutter drum.

  10. Down with Walls, Up with Malls: Taking Classes to the Shopping Centers.

    ERIC Educational Resources Information Center

    Duerden, Noel H.

    1980-01-01

    Learn and Shop, a concept of offering university credit courses by university faculty in shopping centers which was developed by Indiana University-Purdue University in Indianapolis, is described. The Learn and Shop curriculum permits individuals to earn a two-year associate degree in liberal arts entirely at shopping centers. (MLW)

  11. One-stop shopping: the rest of the story.

    PubMed

    Miller, R

    1996-01-01

    The premise of home care one-stop shopping is that one company with an array of services will be more efficient, and therefore, cost-effective, for a managed care organization than several different companies providing services. As home care companies race to become one-stop shops, there are advantages and disadvantages to entering alliances, developing in-house expertise, or acquiring other companies. This article takes a realistic look at one-stop shopping and argues that it may not always be the best way to serve managed care organizations and their patients and should not be the only long-term solution for the home care industry.

  12. Geologic Map of the Albuquerque 30' x 60' Quadrangle, North-Central New Mexico

    USGS Publications Warehouse

    Williams, Paul L.; Cole, James C.

    2007-01-01

    The Albuquerque 30' x 60' quadrangle spans the Rio Grande rift between the Colorado Plateau and Great Plains geologic provinces, and includes parts of the Basin and Range and Southern Rocky Mountain physiographic provinces. Geologic units exposed in the quadrangle range in age from Early Proterozoic schist and granite to modern river alluvium. The principal geologic features of the area, however, chiefly reflect contractional folding and thrusting of the Late Cretaceous Laramide orogeny and the Neogene extension of the Rio Grande rift. Significant parts of the history of the rift in this region are displayed and documented by the geology exposed in the Albuquerque quadrangle. Post-Laramide erosion, beginning at about 60 Ma, is recorded by the Diamond Tail and Galisteo Formations (upper Paleocene and Eocene) that are preserved in the Hagan Basin and around the uplifted margins of the younger Rio Grande rift. Intermediate volcaniclastic deposits of the Espinaso Formation (upper Eocene and Oligocene) were shed in and around the contemporaneous volcanic-intrusive complexes of the Ortiz porphyry belt in the northeastern part of the quadrangle. The earliest fluvial sediments attributed to extension in the Rio Grande rift in this area are the Tanos and Blackshare Formations (upper Oligocene and Miocene) in the Hagan Basin, which indicate extension was underway by 25 Ma. Farther west, the oldest rift-filling sediments are eolian sand and interdune silty deposits of the Zia Formation (lower to middle Miocene). Major extension occurred during the Miocene, but subsidence and sedimentation were highly irregular from place to place. Parts of three rift sub-basins are known within the Albuquerque quadrangle, each basin locally as deep as about 14,000 ft, separated by less-extended zones (structural horsts) where the rift fill is much thinner. The geometry of these early, deep rift sub-basins suggests the primary extension direction was oriented northeast-southwest. Significant

  13. Simulation of a long-term aquifer test conducted near the Rio Grande, Albuquerque, New Mexico

    USGS Publications Warehouse

    McAda, Douglas P.

    2001-01-01

    A long-term aquifer test was conducted near the Rio Grande in Albuquerque during January and February 1995 using 22 wells and piezometers at nine sites, with the City of Albuquerque Griegos 1 production well as the pumped well. Griegos 1 discharge averaged about 2,330 gallons per minute for 54.4 days. A three-dimensional finite-difference ground-water-flow model was used to estimate aquifer properties in the vicinity of the Griegos well field and the amount of infiltration induced into the aquifer system from the Rio Grande and riverside drains as a result of pumping during the test. The model was initially calibrated by trial-and-error adjustments of the aquifer properties. The model was recalibrated using a nonlinear least-squares regression technique. The aquifer system in the area includes the middle Tertiary to Quaternary Santa Fe Group and post-Santa Fe Group valley- and basin-fill deposits of the Albuquerque Basin. The Rio Grande and adjacent riverside drains are in hydraulic connection with the aquifer system. The hydraulic-conductivity values of the upper part of the Santa Fe Group resulting from the model calibrated by trial and error varied by zone in the model and ranged from 12 to 33 feet per day. The hydraulic conductivity of the inner-valley alluvium was 45 feet per day. The vertical to horizontal anisotropy ratio was 1:140. Specific storage was 4 x 10-6 per foot of aquifer thickness, and specific yield was 0.15 (dimensionless). The sum of squared errors between the observed and simulated drawdowns was 130 feet squared. Not all aquifer properties could be estimated using nonlinear regression because of model insensitivity to some aquifer properties at observation locations. Hydraulic conductivity of the inner-valley alluvium, middle part of the Santa Fe Group, and riverbed and riverside-drain bed and specific yield had low sensitivity values and therefore could not be estimated. Of the properties estimated, hydraulic conductivity of the upper part of

  14. Global flexibility--shop floor flexibility: what's a worker to do?

    PubMed

    Forrant, R

    1999-01-01

    For several years new forms of work organization have been introduced by U.S. management to cut labor costs, improve productivity, and increase their shop floor control. Corporations have also invested in computer-controlled machinery in an effort to eliminate large numbers of skilled blue-collar workers and to decrease their reliance on the tacit knowledge of such workers. Once seemingly secure jobs in diverse industries like airplanes, jet engines, machine tools, and computer chips, are no longer so stable. In an effort to expand their global reach and reorganize the workplace, managers are able to capitalize on two conflicted and conflicting attitudes among the workforce: the first, workers most deep-seated fear, the loss of a permanent job; the second, their aspirations to contribute their knowledge and skills in a positive way on the shop floor. In this article the reorganization of work at two western Massachusetts metalworking companies is described. What distinguishes these cases is the central role that the union played in the organized plant and the workers played in both plants to improve production and at least for now preserve jobs. PMID:17208796

  15. An algorithm for a single machine scheduling problem with sequence dependent setup times and scheduling windows

    NASA Technical Reports Server (NTRS)

    Moore, J. E.

    1975-01-01

    An enumeration algorithm is presented for solving a scheduling problem similar to the single machine job shop problem with sequence dependent setup times. The scheduling problem differs from the job shop problem in two ways. First, its objective is to select an optimum subset of the available tasks to be performed during a fixed period of time. Secondly, each task scheduled is constrained to occur within its particular scheduling window. The algorithm is currently being used to develop typical observational timelines for a telescope that will be operated in earth orbit. Computational times associated with timeline development are presented.

  16. 40. William E. Barrett, Photographer, 1973. SHOP, YPOLE, MR. WEST'S ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    40. William E. Barrett, Photographer, 1973. SHOP, Y-POLE, MR. WEST'S HOUSE AND POLE SWELL - West Oil Company Endless Wire Pumping Station, U.S. Route 50 (Volcano vicinity), Petroleum, Ritchie County, WV

  17. VIEW OF STACK WITH AUTOMOBILE AND TRACTOR REPAIR SHOP TO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF STACK WITH AUTOMOBILE AND TRACTOR REPAIR SHOP TO THE FAR RIGHT. WAREHOUSE WITH ITS RIDGELINE ROTARY VENTS TO RIGHT OF STACK. VIEW FROM THE WEST - Kekaha Sugar Company, Sugar Mill Building, 8315 Kekaha Road, Kekaha, Kauai County, HI

  18. NORTH WALL OF ELECTRIC SHOP, SUGAR BIN IS RIGHTOFCENTER, OFFICE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    NORTH WALL OF ELECTRIC SHOP, SUGAR BIN IS RIGHT-OF-CENTER, OFFICE AND LABORATORY AT FAR RIGHT. VIEW FROM THE NORTHEAST - Lihue Plantation Company, Sugar Mill Building, Haleko Road, Lihue, Kauai County, HI

  19. VIEW OF WEST END OF METAL AND ELECTRIC SHOPS AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF WEST END OF METAL AND ELECTRIC SHOPS AND GABLE END OF POWER HOUSE, WITH STACK TO FAR RIGHT. VIEW FROM THE SOUTHWEST - Kekaha Sugar Company, Sugar Mill Building, 8315 Kekaha Road, Kekaha, Kauai County, HI

  20. 7. BUILDING 40. MUSEUM, LIBRARY, PRINTING SHOP, FOUNDRY, VACUUM HEATING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. BUILDING 40. MUSEUM, LIBRARY, PRINTING SHOP, FOUNDRY, VACUUM HEATING SYSTEM. July 31, 1916. - Frankford Arsenal, Building No. 40, South of Tacony Street between Bridge Street & tracks of former Pennsylvania Railroad, Philadelphia, Philadelphia County, PA

  1. 10. TRUSS DETAILS, BRIDGE OVER SCOTT SWAMP (Shop Drawing, Berlin ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. TRUSS DETAILS, BRIDGE OVER SCOTT SWAMP (Shop Drawing, Berlin Construction Company) Sheet 1 of 2, July 5, 1927 - Bridge No. 475, Spanning Pequabuck River on U.S. Route 6, Farmington, Hartford County, CT

  2. 11. FLOOR SYSTEM DETAILS, BRIDGE OVER SCOTT SWAMP (Shop Drawing, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. FLOOR SYSTEM DETAILS, BRIDGE OVER SCOTT SWAMP (Shop Drawing, Berlin Construction Company) Sheet 2 of 2, July 9, 1927 - Bridge No. 475, Spanning Pequabuck River on U.S. Route 6, Farmington, Hartford County, CT

  3. Consumer Roulette: The Shopping Patterns of Mentally Retarded Persons.

    ERIC Educational Resources Information Center

    Williams, Randall D.; Ewing, Sheryl

    1981-01-01

    To develop information regarding the commercial product purchasing behavior of mildly mentally retarded adults, 11 participants were included in a mock shopping exercise. The results indicated several serious deficiencies in the purchasing strategies of the participants. (Author/SB)

  4. 43. NORTHEASTERN VIEW OF MOULD CONDITIONING BUILDING AND BOP SHOP, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    43. NORTHEASTERN VIEW OF MOULD CONDITIONING BUILDING AND BOP SHOP, WITH OPEN HEARTH No. 2 BUILDING ON LEFT. - U.S. Steel Duquesne Works, Basic Oxygen Steelmaking Plant, Along Monongahela River, Duquesne, Allegheny County, PA

  5. 32. SOUTHEASTERN VIEW OF GAS CLEANING PLANT, WITH BOP SHOP ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    32. SOUTHEASTERN VIEW OF GAS CLEANING PLANT, WITH BOP SHOP IN BACKGROUND AND OPEN HEARTH STEELMAKING OFFICE BUILDING TO THE RIGHT. - U.S. Steel Duquesne Works, Basic Oxygen Steelmaking Plant, Along Monongahela River, Duquesne, Allegheny County, PA

  6. Andy Chambers Homestead, Chicken Coop, Saddle Shop, and Granary, looking ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Andy Chambers Homestead, Chicken Coop, Saddle Shop, and Granary, looking northeast - Andy Chambers Homestead, 0.4 mile south of Antelope Flats Road on the east side of Mormon Row Road, Kelly, Teton County, WY

  7. Teaching E-Commerce by Shopping Only Online.

    ERIC Educational Resources Information Center

    Mangan, Catherine S.

    2000-01-01

    Describes the experiences of Bruce D. Weinberg, an assistant professor of marketing at Boston University (Massachusetts), who is doing all his shopping via the Internet to demonstrate to students what works and what fails when selling in cyberspace. (DB)

  8. 34. ROUGH GAS MAIN RUNNING SOUTHEAST FROM THE BOP SHOP ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    34. ROUGH GAS MAIN RUNNING SOUTHEAST FROM THE BOP SHOP TO THE DUAL VENTURI GAS WASHERS. - U.S. Steel Duquesne Works, Basic Oxygen Steelmaking Plant, Along Monongahela River, Duquesne, Allegheny County, PA

  9. 2. POST ENGINEER'S SHOPS AND YARD BUILDINGS FROM PRESIDIO ENTRANCE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. POST ENGINEER'S SHOPS AND YARD BUILDINGS FROM PRESIDIO ENTRANCE GATE AT MASON STREET, LOOKING 270 DEGREES WEST - Presidio of San Francisco, Post Engineer's Headquarters Office, Crissy Field North cantonment, San Francisco, San Francisco County, CA

  10. 3. EASTERN EDGE OF POST ENGINEER'S SHOPS AND YARD, LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. EASTERN EDGE OF POST ENGINEER'S SHOPS AND YARD, LOOKING 312 DEGREES NORTH WEST, EUCALYPTUS TREES DENOTE EDGE OF PRESIDIO. - Presidio of San Francisco, Post Engineer's Headquarters Office, Crissy Field North cantonment, San Francisco, San Francisco County, CA

  11. 1. OVERVIEW OF POST ENGINEER'S SHOPS AND YARD BUILDINGS, LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. OVERVIEW OF POST ENGINEER'S SHOPS AND YARD BUILDINGS, LOOKING 40 DEGREES NORTH EAST - Presidio of San Francisco, Post Engineer's Headquarters Office, Crissy Field North cantonment, San Francisco, San Francisco County, CA

  12. 203. ATTIC, AREA OVER WOOD SHOP AND STORAGE AREA LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    203. ATTIC, AREA OVER WOOD SHOP AND STORAGE AREA LOOKING NORTH. ELEVATOR SHAFT IS AGAINST FAR WALL. - Gruber Wagon Works, Pennsylvania Route 183 & State Hill Road at Red Bridge Park, Bernville, Berks County, PA

  13. 28. View of construction shops looking west and downstream. Photographer ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    28. View of construction shops looking west and downstream. Photographer unknown, October 29, 1926. Source: MWD. - Waddell Dam, On Agua Fria River, 35 miles northwest of Phoenix, Phoenix, Maricopa County, AZ

  14. 10. INTERIOR, 'CENTRAL NORTH WING' PORTION OF SHOP AREA, FROM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. INTERIOR, 'CENTRAL NORTH WING' PORTION OF SHOP AREA, FROM STAIRCASE ON NORTH SIDE OF 'WING', LOOKING SOUTHEAST. - Oakland Naval Supply Center, Lumber Storage & Box Factory, East of Fifth Street, between H & I Streets, Oakland, Alameda County, CA

  15. 33. SOUTHWEST CORNER OF BUILDING 232 (MINE SHOP) IN ASSEMBLY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    33. SOUTHWEST CORNER OF BUILDING 232 (MINE SHOP) IN ASSEMBLY AREA WITH INDEPENDENT BLAST WALL AT LEFT. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

  16. 39. DOOR DETAIL OF BUILDING 235 (PAINT AND REPAIR SHOP) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    39. DOOR DETAIL OF BUILDING 235 (PAINT AND REPAIR SHOP) IN ASSEMBLY AREA. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

  17. Apparel shopping behavior of elderly men and women.

    PubMed

    Chowdhary, U

    1989-06-01

    70 interested elderly (65 yr. and over) men and women participated in an investigation of older consumers' apparel-shopping behavior and satisfactions and dissatisfactions with available clothing and facilities. Analysis showed that the participants considered shopping ease, wide variety, and label/brand as some of the important factors while shopping for clothes. The respondents were satisfied with good selection, closeness of the mall, and reasonable sales. However, their dissatisfactions ranged from service to fit and size, youthful styles, and abundance of imported clothing. In-store displays, mail order catalogs, and window shopping were the most commonly used sources of apparel information. Several implications of the findings were discussed and suggestions for further research were made. PMID:2762083

  18. 7. Detail of the Grant Locomotive Works Erecting Shop looking ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. Detail of the Grant Locomotive Works Erecting Shop looking southwest showing ruined wall and entrance of a single story addition. - Grant Locomotive Works, Market & Spruce Streets, Paterson, Passaic County, NJ

  19. 14. INTERIOR OF CARPENTER SHOP, LOOKING SOUTH. NOTE THE SLIDING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. INTERIOR OF CARPENTER SHOP, LOOKING SOUTH. NOTE THE SLIDING FIRE DOOR IN THE FAR CORNER. - U.S. Coast Guard Air Station San Francisco, Warehouse, 1020 North Access Road, San Francisco, San Francisco County, CA

  20. VIEW OF FURNACE NO. 2 AND CARPENTRY SHOP, LOOKING WEST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF FURNACE NO. 2 AND CARPENTRY SHOP, LOOKING WEST - Chambers Window Glass Company, Furnace No. 2, North of Drey (Nineteenth) Street, West of Constitution Boulevard, Arnold, Westmoreland County, PA

  1. 118. BENCH SHOP, NORTHWEST CORNER SHOWING ENTRANCE TO ROOM FROM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    118. BENCH SHOP, NORTHWEST CORNER SHOWING ENTRANCE TO ROOM FROM OUTSIDE. OFFICE SAFE AT CENTER. - Gruber Wagon Works, Pennsylvania Route 183 & State Hill Road at Red Bridge Park, Bernville, Berks County, PA

  2. 178. PAINT SHOP, LOOKING SOUTHWEST TOWARD CENTER OF ROOM. OPENING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    178. PAINT SHOP, LOOKING SOUTHWEST TOWARD CENTER OF ROOM. OPENING IN BACKGROUND IS SLIDING WALL. - Gruber Wagon Works, Pennsylvania Route 183 & State Hill Road at Red Bridge Park, Bernville, Berks County, PA

  3. 125. BENCH SHOP, LOOKING SOUTHEAST AT CENTER OF ROOM SHOWING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    125. BENCH SHOP, LOOKING SOUTHEAST AT CENTER OF ROOM SHOWING TOOL SHARPENER ON RIGHT AND ELECTRIC TABLE SAW AT CENTER. - Gruber Wagon Works, Pennsylvania Route 183 & State Hill Road at Red Bridge Park, Bernville, Berks County, PA

  4. 12. Wagon Repair and Paint Shop (second floor in Woodworking ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. Wagon Repair and Paint Shop (second floor in Woodworking Mill): view looking east showing paint storage on left and old living quarters on right - Ben Thresher's Mill, State Aid No. 1, Barnet, Caledonia County, VT

  5. 64. New Haven Yards & Shops. New Haven, New Haven ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    64. New Haven Yards & Shops. New Haven, New Haven Co., CT. Sec. 9108, MP 72.50. - Northeast Railroad Corridor, Amtrak Route between New York/Connecticut & Connecticut/Rhode Island State Lines, New Haven, New Haven County, CT

  6. 66. New Haven Yards & Shops. New Haven, New Haven ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    66. New Haven Yards & Shops. New Haven, New Haven Co., CT. Sec. 9108, MP 72.50. - Northeast Railroad Corridor, Amtrak Route between New York/Connecticut & Connecticut/Rhode Island State Lines, New Haven, New Haven County, CT

  7. 67. New Haven Yards & Shops. New Haven, New Haven ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    67. New Haven Yards & Shops. New Haven, New Haven Co., CT. Sec. 9108, MP 72.50. - Northeast Railroad Corridor, Amtrak Route between New York/Connecticut & Connecticut/Rhode Island State Lines, New Haven, New Haven County, CT

  8. 63. New Haven Yards & Shops. New Haven, New Haven ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    63. New Haven Yards & Shops. New Haven, New Haven Co., CT. Sec. 9108, MP 72.50. - Northeast Railroad Corridor, Amtrak Route between New York/Connecticut & Connecticut/Rhode Island State Lines, New Haven, New Haven County, CT

  9. 65. New Haven Yards & Shops. New Haven, New Haven ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    65. New Haven Yards & Shops. New Haven, New Haven Co., CT. Sec. 9108, MP 72.50. - Northeast Railroad Corridor, Amtrak Route between New York/Connecticut & Connecticut/Rhode Island State Lines, New Haven, New Haven County, CT

  10. 68. New Haven Yards & Shops. New Haven, New Haven ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    68. New Haven Yards & Shops. New Haven, New Haven Co., CT. Sec. 9108, MP 72.50. - Northeast Railroad Corridor, Amtrak Route between New York/Connecticut & Connecticut/Rhode Island State Lines, New Haven, New Haven County, CT

  11. 69. New Haven Yards & Shops. New Haven, New Haven ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    69. New Haven Yards & Shops. New Haven, New Haven Co., CT. Sec. 9108, MP 72.50. - Northeast Railroad Corridor, Amtrak Route between New York/Connecticut & Connecticut/Rhode Island State Lines, New Haven, New Haven County, CT

  12. 62. New Haven Station Yards & Shops. New Haven, New ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    62. New Haven Station Yards & Shops. New Haven, New Haven Co., CT. Sec. 9108, MP 72.50. - Northeast Railroad Corridor, Amtrak Route between New York/Connecticut & Connecticut/Rhode Island State Lines, New Haven, New Haven County, CT

  13. 10. LOOKING SOUTH IN BOP SHOP AT FUME HOOD AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. LOOKING SOUTH IN BOP SHOP AT FUME HOOD AND SPARE OXYGEN LANCES ON THE SERVICE FLOOR OF THE FURNACE AISLE. - U.S. Steel Duquesne Works, Basic Oxygen Steelmaking Plant, Along Monongahela River, Duquesne, Allegheny County, PA

  14. 9. LOOKING NORTH IN BOP SHOP ON SERVICE FLOOR OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. LOOKING NORTH IN BOP SHOP ON SERVICE FLOOR OF FURNACE AISLE AT FUME HOOD SHOWING COLLAR AND ENTRANCE FOR OXYGEN LANCES. - U.S. Steel Duquesne Works, Basic Oxygen Steelmaking Plant, Along Monongahela River, Duquesne, Allegheny County, PA

  15. 18. Blacksmith Shop (first floor): view looking north; trip hammer ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. Blacksmith Shop (first floor): view looking north; trip hammer and coal bin in background, shears and swage block in foreground - Ben Thresher's Mill, State Aid No. 1, Barnet, Caledonia County, VT

  16. Consumer's Online Shopping Influence Factors and Decision-Making Model

    NASA Astrophysics Data System (ADS)

    Yan, Xiangbin; Dai, Shiliang

    Previous research on online consumer behavior has mostly been confined to the perceived risk which is used to explain those barriers for purchasing online. However, perceived benefit is another important factor which influences consumers’ decision when shopping online. As a result, an integrated consumer online shopping decision-making model is developed which contains three elements—Consumer, Product, and Web Site. This model proposed relative factors which influence the consumers’ intention during the online shopping progress, and divided them into two different dimensions—mentally level and material level. We tested those factors with surveys, from both online volunteers and offline paper surveys with more than 200 samples. With the help of SEM, the experimental results show that the proposed model and method can be used to analyze consumer’s online shopping decision-making process effectively.

  17. 6. EXTERIOR NORTHEAST CORNER VIEW, FACING SOUTHWEST. CLEAR SHOP OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. EXTERIOR NORTHEAST CORNER VIEW, FACING SOUTHWEST. CLEAR SHOP OF CANOPY 723 AS WELL NORTH FACADES OF ADDITIONS TO BUILDING 10. - NASA Industrial Plant, Maintenance Facility, 12214 Lakewood Boulevard, Downey, Los Angeles County, CA

  18. View of Feature 15, location of the maintenance shops, looking ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of Feature 15, location of the maintenance shops, looking northeast - Orphan Lode Mine, North of West Rim Road between Powell Point and Maricopa Point, South Rim, Grand Canyon Village, Coconino County, AZ

  19. View of Feature 15, location of the maintenance shops, looking ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of Feature 15, location of the maintenance shops, looking southeast - Orphan Lode Mine, North of West Rim Road between Powell Point and Maricopa Point, South Rim, Grand Canyon Village, Coconino County, AZ

  20. 43. 253255 AUBURN AVENUE (Jim's Place; Unisex Beauty Shop) NORTH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    43. 253-255 AUBURN AVENUE (Jim's Place; Unisex Beauty Shop) NORTH ELEVATION 44. --- PIEDMONT AVENUE (Pucker House) EAST ELEVATION - 126-255 Auburn Avenue (Commercial Buildings), Auburn Avenue, Atlanta, Fulton County, GA