Science.gov

Sample records for algal assay bottle

  1. Reporter gene assays for algal-derived toxins.

    PubMed

    Fairey, E R; Ramsdell, J S

    1999-01-01

    We have modified the cell-based directed cytotoxicity assay for sodium channel and calcium channel active phycotoxins using a c-fos-luciferase reporter gene construct. In this report we describe the conceptual basis to the development of reporter gene assays for algal-derived toxins and summarize both published and unpublished data using this method. N2A mouse neuroblastoma cells, which express voltage-dependent sodium channels, were stably transfected with the reporter gene c-fos-luc, which contains the firefly luciferase gene under the transcriptional regulation of the human c-fos response element. The characteristics of the N2A reporter gene assay were determined by dose response with brevetoxin and ciguatoxin. Brevetoxin-1 and ciguatoxin-1 induced c-fos-luc with an EC50 of 4.6 and 3.0 ng ml(-1), respectively. Saxitoxin caused a concentration-dependent inhibition of brevetoxin-1 induction of c-fos-luc with an EC50 of 3.5 ng ml(-1). GH4C1 rat pituitary cells, which lack voltage-dependent sodium channels but express voltage-dependent calcium channels, were also stably transfected with the c-fos-luc. GH4C1 cells expressing c-fos-luciferase were responsive to maitotoxin (1 ng ml(-1)) and a putative toxin produced by Pfiesteria piscicida. Although reporter gene assays are not designed to replace existing detection methods used to measure toxin activity in seafood, they do provide a valuable means to screen algal cultures for toxin activity, to conduct assay-guided fractionation and to characterize pharmacologic properties of algal toxins.

  2. Disk Diffusion Assay to Assess the Antimicrobial Activity of Marine Algal Extracts.

    PubMed

    Desbois, Andrew P; Smith, Valerie J

    2015-01-01

    Marine algae are a relatively untapped source of bioactive natural products, including those with antimicrobial activities. The ability to assess the antimicrobial activity of cell extracts derived from algal cultures is vital to identifying species that may produce useful novel antibiotics. One assay that is used widely for this purpose is the disk diffusion assay due to its simplicity, rapidity, and low cost. Moreover, this assay gives output data that are easy to interpret and can be used to screen many samples at once irrespective of the solvent used during preparation. In this chapter, a step-by-step protocol for performing a disk diffusion assay is described. The assay is particularly well suited to testing algal cell extracts and fractions resulting from separation through bioassay-guided approaches.

  3. Adaptation and evaluation of the bottle assay for monitoring insecticide resistance in disease vector mosquitoes in the Peruvian Amazon

    PubMed Central

    Zamora Perea, Elvira; Balta León, Rosario; Palomino Salcedo, Miriam; Brogdon, William G; Devine, Gregor J

    2009-01-01

    Background The purpose of this study was to establish whether the "bottle assay", a tool for monitoring insecticide resistance in mosquitoes, can complement and augment the capabilities of the established WHO assay, particularly in resource-poor, logistically challenging environments. Methods Laboratory reared Aedes aegypti and field collected Anopheles darlingi and Anopheles albimanus were used to assess the suitability of locally sourced solvents and formulated insecticides for use with the bottle assay. Using these adapted protocols, the ability of the bottle assay and the WHO assay to discriminate between deltamethrin-resistant Anopheles albimanus populations was compared. The diagnostic dose of deltamethrin that would identify resistance in currently susceptible populations of An. darlingi and Ae. aegypti was defined. The robustness of the bottle assay during a surveillance exercise in the Amazon was assessed. Results The bottle assay (using technical or formulated material) and the WHO assay were equally able to differentiate deltamethrin-resistant and susceptible An. albimanus populations. A diagnostic dose of 10 μg a.i./bottle was identified as the most sensitive discriminating dose for characterizing resistance in An. darlingi and Ae. aegypti. Treated bottles, prepared using locally sourced solvents and insecticide formulations, can be stored for > 14 days and used three times. Bottles can be stored and transported under local conditions and field-assays can be completed in a single evening. Conclusion The flexible and portable nature of the bottle assay and the ready availability of its components make it a potentially robust and useful tool for monitoring insecticide resistance and efficacy in remote areas that require minimal cost tools. PMID:19728871

  4. Rapid detection of blaKPC carbapenemase genes by internally controlled real-time PCR assay using bactec blood culture bottles.

    PubMed

    Hindiyeh, Musa; Smollan, Gill; Grossman, Zehava; Ram, Daniela; Robinov, Jana; Belausov, Natasha; Ben-David, Debbie; Tal, Ilana; Davidson, Yehudit; Shamiss, Ari; Mendelson, Ella; Keller, Nathan

    2011-07-01

    Rapid detection of drug-resistant bacteria in clinical samples plays an instrumental role in patients' infection management and in implementing effective infection control policies. In the study described in this report, we validated a multiplex TaqMan real-time quantitative PCR (qPCR) assay for the detection of bla(KPC) genes and the human RNase P gene in Bactec blood culture bottles. The MagNA Pure LC (version 2.0) instrument was utilized to extract nucleic acids from the inoculated broth, while bovine serum albumin (BSA) was utilized as the PCR inhibitor reliever. The multiplex assay, which was specific for the detection of bla(KPC) genes, had a limit of detection of 19 CFU per reaction mixture with human blood-spiked Bactec bottles. Of the 323 Bactec blood culture sets evaluated, the same 55 (17%) blood cultures positive for carbapenem-resistant bacteria by culture were also positive by the validated qPCR assay. Thus, the sensitivity, specificity, positive predictive value, and negative predictive value of the qPCR assay compared to the results of culture were all 100%. bla(KPC) genes were also detected from the same Bactec bottle broth after manual extraction with a QIAamp DNA minikit; however, there was an average 3-threshold-cycle delay in the qPCR readings. With the limited therapeutic options available, the accurate and rapid detection of bla(KPC)-possessing bacteria by the described bla(KPC)/RNase P assay will be a crucial first step in ensuring optimal clinical outcomes and infection control.

  5. Evaluation of the Punch-it™ NA-Sample kit for detecting microbial DNA in blood culture bottles using PCR-reverse blot hybridization assay.

    PubMed

    Kim, Jungho; Wang, Hye-Young; Kim, Seoyong; Park, Soon Deok; Yu, Kwangmin; Kim, Hyo Youl; Uh, Young; Lee, Hyeyoung

    2016-09-01

    DNA extraction efficiency affects the success of PCR-based method applications. The Punch-it™ NA-Sample kit for extracting DNA by using paper chromatography is technically easy to use and requires just two reagents and only 10min to complete. The Punch-it™ NA-Sample kit could be offered as a rapid, accurate, and convenient method for extracting bacterial and fungal DNA from blood culture bottles. We compared the efficiencies of the commercial kit (Punch-it™ NA-Sample kit) and an in-house conventional boiling method with Chelex-100 resin for DNA extraction from blood culture bottles. The efficiency of the two DNA extraction methods was assessed by PCR-reverse blot hybridization assay (PCR-REBA, REBA Sepsis-ID) for detecting Gram positive (GP) bacteria, Gram negative (GN) bacteria, and Candida species with 196 positive and 200 negative blood culture bottles. The detection limits of the two DNA extraction methods were 10(3)CFU/mL for GP bacteria, 10(3)CFU/mL for GN bacteria, and 10(4)CFU/mL for Candida. The sensitivity and specificity of the Punch-it™ NA-Sample kit by REBA Sepsis-ID were 95.4% (187/196) and 100% (200/200), respectively. The overall agreement of the two DNA extraction methods was 98.9% (392/396). Three of four samples showing discrepant results between the two extraction methods were more accurately matched up with the Punch-it™ NA-Sample kit based on conventional culture methods. The results indicated that the Punch-it™ NA-Sample kit extracted bacterial and fungal DNA in blood culture bottles and allowed extracted DNA to be used in molecular assay.

  6. Effects of acid stress on aerobic decomposition of algal and aquatic macrophyte detritus: Direct comparison in a radiocarbon assay

    SciTech Connect

    Schoenberg, S.A.; Benner, R.; Armstrong, A.; Sobecky, P.; Hodson, R.E. )

    1990-01-01

    Radiolabeled phytoplankton and macrophyte lignocelluloses were incubated at pHs 4 and 7 in water from a naturally acidic freshwater wetland (Okefenokee Swamp; ambient pH, 3.8 to 4.2), a freshwater reservoir (L-Lake; pH 6.7 to 7.2), and a marine marsh (Sapelo Island; pH {approximately}7.8). The data suggest that acidity is an important factor in explaining the lower decomposition rates of algae in Okefenokee Swamp water relative to L-Lake or Sapelo Island water. The decomposition of algal substrate was less sensitive to low pH ({approximately}5 to 35% inhibition) than was the decomposition of lignocellulose ({approximately}30 to 70% inhibition). These substrate-dependent differences were greater and more consistent in salt marsh than in L-lake incubations. In both freshwater sites, the extent to which decomposition was suppressed by acidity was greater for green algal substrate than for mixed diatom or blue-green algal (cyanobacteria) substrates. The use of different bases to adjust pH or incubation in a defined saltwater medium had no significant effect on substrate-dependent differences. Although pH differences with lignocellulose were larger in marine incubations, amendment of lake water with marine bacteria or with calcium, known to stabilize exoenzymes in soils, did not magnify the sensitivity of decomposition to acid stress.

  7. Cell size and the blockage of electron transfer in photosynthesis: proposed endpoints for algal assays and its application to soil alga Chlorococcum infusionum.

    PubMed

    Nam, Sun-Hwa; An, Youn-Joo

    2015-06-01

    This study evaluated multiple endpoints of algal assays to identify sensitive and easy to use endpoints that could be applied to evaluate algal toxicity in metal-polluted soil extracts. Soil algae play an important role in trophic levels; thus, Chlorococcum infusionum was selected as the test species. Soil extracts were used because they might help identify potential soil retention and ecological hazards caused by pollutants that are present in the soil aqueous phase. The multi-endpoints measured were growth yield, photosynthetic activities, and cell viabilities. Nine parameters were measured to evaluate photosynthetic activity; namely, specific energy fluxes per quinone A-reducing photosystem II reaction center (absorption flux, trapped energy flux, electron transport flux, and dissipated energy flux per reaction center), quantum yields (maximum quantum yield of primary photochemistry, quantum yield of electron transport, quantum yield of energy dissipation, and average quantum yield of primary photochemistry), and the blockage of electron transfer from the reaction center to the quinone pool. Cell viability was evaluated by measuring cell size, cell granularity, and the autofluorescence of chlorophyll using flow cytometry. The results showed that heavy metals reduced growth yield, cell viability, and the photosynthetic activity of C. infusionum in soil extracts. Out of the 13 tested endpoints, the blockage of electron transfer from the reaction center to the quinone pool and cell size represented the most sensitive endpoints. We propose that both endpoints should be measured, along with conventional growth yield, to determine the effect of soil pollutants and to lower pollutant concentrations in soils.

  8. Development and evaluation of a DNA microarray assay for the simultaneous detection of nine harmful algal species in ship ballast and seaport waters

    NASA Astrophysics Data System (ADS)

    Chen, Xianfeng; Zhou, Qianjin; Duan, Weijun; Zhou, Chengxu; Duan, Lijun; Zhang, Huili; Sun, Aili; Yan, Xiaojun; Chen, Jiong

    2016-01-01

    Rapid, high-throughput and reliable methods are urgently required to accurately detect and monitor harmful algae, which are responsible for algal blooms, such as red and green tides. In this study, we successfully developed a multiplex PCR-based DNA microarray method capable of detecting nine harmful algal species simultaneously, namely Alexandrium tamarense, Gyrodinium instriatum, Heterosigma akashiwo, Karenia mikimotoi, Prorocentrum donghaiense, Prorocentrum minimum, Ulva compressa, Ulva ohnoi and Ulva prolifera. This method achieved a limit of detection (LOD) of 0.5 ng of genomic DNA (orders of magnitude of the deci-nanogram range) in the tested algae cultures. Altogether, 230 field samples from ship ballast waters and seaport waters were used to evaluate the DNA microarray. The clinical sensitivity and specificity of the DNA microarray assay in detecting field samples were 96.4% and 90.9%, respectively, relative to conventional morphological methods. This indicated that this high-throughput, automatic, and specific method is well suited for the detection of algae in water samples.

  9. Influence of alumina coating on characteristics and effects of SiO2 nanoparticles in algal growth inhibition assays at various pH and organic matter contents.

    PubMed

    Van Hoecke, Karen; De Schamphelaere, Karel A C; Ramirez-Garcia, Sonia; Van der Meeren, Paul; Smagghe, Guy; Janssen, Colin R

    2011-08-01

    Silica nanoparticles (NPs) belong to the industrially most important NP types. In a previous study it was shown that amorphous SiO(2) NPs of 12.5 and 27.0 nm are stable in algal growth inhibition assays and that their ecotoxic effects are related to NP surface area. Here, it was hypothesized and demonstrated that an alumina coating completely alters the particle-particle, particle-test medium and particle-algae interactions of SiO(2) NPs. Therefore, stability and surface characteristics, dissolution, nutrient adsorption and effects on algal growth rate of both alumina coated SiO(2) NPs and bare SiO(2) NPs in OECD algal test medium as a function of pH (6.0-8.6) and natural organic matter (NOM) contents (0-12 mg C/l) were investigated. Alumina coated SiO(2) NPs aggregated in all media and adsorbed phosphate depending on pH and NOM concentration. On the other hand, no aggregation or nutrient adsorption was observed for the bare SiO(2) NPs. Due to their positive surface charge, alumina coated SiO(2) NPs agglomerated with Pseudokirchneriella subcapitata. Consequently, algal cell density measurements based on cell counts were unreliable and hence fluorescent detection of extracted chlorophyll was the preferred method. Alumina coated SiO(2) NPs showed lower toxicity than bare SiO(2) NPs at concentrations ≥46 mg/l, except at pH 6.0. At low concentrations, no clear pH effect was observed for alumina coated SiO(2) NPs, while at higher concentrations phosphate deficiency could have contributed to the higher toxicity of those particles at pH 6.0-6.8 compared to higher pH values. Bare SiO(2) NPs were not toxic at pH 6.0 up to 220 mg/l. Addition of NOM decreased toxicity of both particles. For SiO(2) NPs the 48 h 20% effect concentration of 21.8 mg/l increased 2.6-21 fold and a linear relationship was observed between NOM concentration and effective concentrations. No effect was observed for alumina coated SiO(2) NPs in presence of NOM up to 1000 mg/l. All experiments point

  10. Bisphenol A determination in baby bottles by chemiluminescence enzyme-linked immunosorbent assay, lateral flow immunoassay and liquid chromatography tandem mass spectrometry.

    PubMed

    Maiolini, Elisabetta; Ferri, Elida; Pitasi, Agata Laura; Montoya, Angel; Di Giovanni, Manuela; Errani, Ermanno; Girotti, Stefano

    2014-01-07

    Two immunoassays, a Lateral Flow ImmunoAssay (LFIA) based on colloidal gold nanoparticle labels and an indirect competitive chemiluminescence enzyme-linked immunosorbent assay (CL-ELISA), were developed and a high performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) method was optimized to assess the possible release of bisphenol A (BPA, 4,4'-isopropylidenediphenol) from different plastic baby bottles treated with simulating solutions. Coating conjugate concentration, anti-BPA antibody dilution, incubation time of the primary and secondary antibodies, and tolerance to different organic solvents were optimized to obtain the best performance of the ELISA with chemiluminescent end-point detection. The influence of different buffers on LFIA performance was also evaluated. Both methods showed good repeatability (mean CV value around 13%) and sensitivity. Reproducibility tests for CL-ELISA gave a mean CV value of about 25%. The IC50 and Limit of Detection (LOD) values of CL-ELISA were 0.2 and 0.02 ng mL(-1), respectively. The LOD of LFIA was 0.1 μg mL(-1). A LC-MS/MS method was also optimized. The separation was performed in a C18 column with a triple-quadrupole mass spectrometer with electrospray ionisation interface. The method showed a good linearity in the range 2 to 500 ng mL(-1), with a regression coefficient of 0.998. In the simulating solutions the detection and quantification limits, calculated by the signal to noise level of 3 (S/N = 3), were 5.8 ng mL(-1) and 17.4 ng mL(-1), respectively. This limit of quantification was about 3 and 35 times lower than the permitted limits set by the official method CEN/TS 13130-13 (0.05 μg mL(-1)) and by the Directive 2004/19/EC (0.6 μg mL(-1)), respectively. The methods were applied to determine BPA release from baby bottles, performing repeated procedures according to EU and national regulations. The results demonstrated that no BPA migration from the tested plastic materials occurred with only one

  11. Bottle Biology.

    ERIC Educational Resources Information Center

    CSTA Journal, 1995

    1995-01-01

    Provides hands-on biology activities using plastic bottles that allow students to become engaged in asking questions, creating experiments, testing hypotheses, and generating answers. Activities explore terrestrial and aquatic systems. (MKR)

  12. Bottled Water and Fluoride

    MedlinePlus

    ... Fluoridation Journal Articles for Community Water Fluoridation Bottled Water Recommend on Facebook Tweet Share Compartir Consumers drink ... questions about bottled water and fluoride. Does bottled water contain fluoride? Bottled water products may contain fluoride, ...

  13. Direct detection of mecA, blaSHV , blaCTX-M , blaTEM and blaOXA genes from positive blood culture bottles by multiplex-touchdown PCR assay.

    PubMed

    Wang, M-Y; Geng, J-L; Chen, Y-J; Song, Y; Sun, M; Liu, H-Z; Hu, C-J

    2017-02-01

    Methicillin-resistant staphylococci (MRS) and ESBL(Extended-Spectrum β-Lactamase)-producing bacteria are the most important resistant pathogens in sepsis. In this study, a new multiplex-touchdown PCR method (MT-PCR) was developed to detect rapidly and simultaneously the presence of mecA, blaSHV , blaCTX-M , blaTEM and blaOXA genes from positive blood culture bottles. The technique showed a sensitivity of 10(3 ) CFU ml(-1) for mecA detection and of 10(2)  CFU ml(-1) for other genes, and 100% specificity in the detection of all genes. All genes were detected in the spiked blood culture bottles artificially contaminated with reference strains. Three methicillin-resistant S. aureus (MRSA), two methicillin-resistant S. epidermidis (MRSE) and 32 ESBL-producing bacteria, were isolated from the clinical blood culture specimens in 48 h by standard microbiological procedures. The corresponding genes were detected directly in the three MRSA, two MRSE and 29 ESBL-producing bacteria from the clinical blood culture specimens in 4 h by MT-PCR assay. None of the blaSHV , blaCTX-M , blaTEM and blaOXA genes were detected in three other bottles with ESBL-producing bacteria because of other ESBL genotypes in the pathogens. Likewise, all bottles proven negative by culture remained negative by PCR. The proposed method was rapid, sensitive and specific, and was able to directly detect the genes of MRS and ESBL-producing bacteria from the blood culture bottles.

  14. Double triplex real-time PCR assay for simultaneous detection of Staphylococcus aureus, Staphylococcus epidermidis, Staphylococcus hominis, and Staphylococcus haemolyticus and determination of their methicillin resistance directly from positive blood culture bottles.

    PubMed

    Kilic, Abdullah; Basustaoglu, A Celal

    2011-12-01

    We developed and validated here a double triplex real-time PCR assay to simultaneously detect and identify Staphylococcus aureus, Staphylococcus epidermidis, Staphylococcus hominis, Staphylococcus haemolyticus and their methicillin resistance in a single reaction directly from Gram-positive cocci-in-clusters (GPCs)-positive blood culture bottles. From August 15, 2009 through February 15, 2010, 238 GPC-positive samples were collected and identified by conventional methods as 11 methicillin-resistant S. aureus (MRSA), 28 methicillin-susceptible S. aureus (MSSA), 176 MR coagulase-negative staphylococci (MRCoNS), 21 MSCoNS and two Enterococcus faecalis. The double triplex real-time PCR assay was targeted and detected tuf, nuc and mecA genes in the first tube and atlE, gap and mvaA genes in the second tube which could be run simultaneously. The detection limit of the assay was found at 10(3) CFU/ml for the atleE gene, 10(4) CFU/ml for the mva gene and 10(5) CFU/ml for gap, nuc, mecA and tuf genes based on seeding experiments. All Staphylococcus species except two S. epidermidis were correctly identified by the assay. The double triplex real-time PCR assay quickly and accurately detects S. aureus, S. epidermidis, S. hominis and S. haemolyticus and their methicillin resistance in a single reaction directly from positive blood culture bottles within 83 min.

  15. Bottle Biology.

    ERIC Educational Resources Information Center

    Jager, Peter

    1993-01-01

    Describes activities which utilize plastic drink bottles and are designed to foster the development of a wide range of biological and ecological concepts. Includes instructions for making a model compost column and presents a model that illustrates open versus closed ecosystems. (DDR)

  16. Air pollutant production by algal cell cultures

    NASA Technical Reports Server (NTRS)

    Fong, F.; Funkhouser, E. A.

    1982-01-01

    The production of phytotoxic air pollutants by cultures of Chlorella vulgaris and Euglena gracilis is considered. Algal and plant culture systems, a fumigation system, and ethylene, ethane, cyanide, and nitrogen oxides assays are discussed. Bean, tobacco, mustard green, cantaloupe and wheat plants all showed injury when fumigated with algal gases for 4 hours. Only coleus plants showed any resistance to the gases. It is found that a closed or recycled air effluent system does not produce plant injury from algal air pollutants.

  17. Comparison of multiplex real-time PCR and PCR-reverse blot hybridization assay for the direct and rapid detection of bacteria and antibiotic resistance determinants in positive culture bottles.

    PubMed

    Wang, Hye-Young; Kim, Seoyong; Kim, Jungho; Park, Soon Deok; Kim, Hyo Youl; Uh, Young; Lee, Hyeyoung

    2016-09-01

    The aim of this study was to evaluate the performance of a commercially available multiplex real-time PCR assay and a PCR-reverse blot hybridization assay (PCR-REBA) for the rapid detection of bacteria and identification of antibiotic resistance genes directly from blood culture bottles and to compare the results of these molecular assays with conventional culture methods. The molecular diagnostic methods were used to evaluate 593 blood culture bottles from patients with bloodstream infections. The detection positivity of multiplex real-time PCR assay for Gram-positive bacteria, Gram-negative bacteria and Candida spp. was equivalent to PCR-REBA as 99.6 %, 99.1 % and 100 %, respectively. Using conventional bacterial cultures as the gold standard, the sensitivity, specificity, positive predictive value and negative predictive value of these two molecular methods were 99.5 % [95 % confidence interval (CI), 0.980-1.000; P<0.001), 100 % (95 % CI, 0.983-1.000; P<0.001), 100 % and 99 %, respectively. However, positivity of the Real-methicillin-resistant Staphylococcusaureus multiplex real-time PCR assay targeting the mecA gene to detect methicillin resistance was lower than that of the PCR-REBA method, detecting an overall positivity of 98.4 % (n=182; 95 % CI, 0.964-1.000; P<0.009) and 99.5 % (n=184; 95 % CI, 0.985-1.000; P<0.0001), respectively. The entire two methods take about 3 h, while results from culture can take up to 48-72 h. Therefore, the use of these two molecular methods was rapid and reliable for the characterization of causative pathogens in bloodstream infections.

  18. Banning the Bottle

    ERIC Educational Resources Information Center

    Palliser, Janna

    2010-01-01

    Bottled water is ubiquitous, taken for granted, and seemingly benign. Americans are consuming bottled water in massive amounts and spending a lot of money: In 2007, Americans spent $11.7 billion on 8.8 billions gallons of bottled water (Gashler 2008). That same year, two million plastic water bottles were used in the United States every five…

  19. Algal biofuels.

    PubMed

    Razeghifard, Reza

    2013-11-01

    The world is facing energy crisis and environmental issues due to the depletion of fossil fuels and increasing CO2 concentration in the atmosphere. Growing microalgae can contribute to practical solutions for these global problems because they can harvest solar energy and capture CO2 by converting it into biofuel using photosynthesis. Microalgae are robust organisms capable of rapid growth under a variety of conditions including in open ponds or closed photobioreactors. Their reduced biomass compounds can be used as the feedstock for mass production of a variety of biofuels. As another advantage, their ability to accumulate or secrete biofuels can be controlled by changing their growth conditions or metabolic engineering. This review is aimed to highlight different forms of biofuels produced by microalgae and the approaches taken to improve their biofuel productivity. The costs for industrial-scale production of algal biofuels in open ponds or closed photobioreactors are analyzed. Different strategies for photoproduction of hydrogen by the hydrogenase enzyme of green algae are discussed. Algae are also good sources of biodiesel since some species can make large quantities of lipids as their biomass. The lipid contents for some of the best oil-producing strains of algae in optimized growth conditions are reviewed. The potential of microalgae for producing petroleum related chemicals or ready-make fuels such as bioethanol, triterpenic hydrocarbons, isobutyraldehyde, isobutanol, and isoprene from their biomass are also presented.

  20. Heteroduplex mobility assay-guided sequence discovery: elucidation of the small subunit (18S) rDNA sequences of Pfiesteria piscicida and related dinoflagellates from complex algal culture and environmental sample DNA pools.

    PubMed

    Oldach, D W; Delwiche, C F; Jakobsen, K S; Tengs, T; Brown, E G; Kempton, J W; Schaefer, E F; Bowers, H A; Glasgow, H B; Burkholder, J M; Steidinger, K A; Rublee, P A

    2000-04-11

    The newly described heterotrophic estuarine dinoflagellate Pfiesteria piscicida has been linked with fish kills in field and laboratory settings, and with a novel clinical syndrome of impaired cognition and memory disturbance among humans after presumptive toxin exposure. As a result, there is a pressing need to better characterize the organism and these associations. Advances in Pfiesteria research have been hampered, however, by the absence of genomic sequence data. We employed a sequencing strategy directed by heteroduplex mobility assay to detect Pfiesteria piscicida 18S rDNA "signature" sequences in complex pools of DNA and used those data as the basis for determination of the complete P. piscicida 18S rDNA sequence. Specific PCR assays for P. piscicida and other estuarine heterotrophic dinoflagellates were developed, permitting their detection in algal cultures and in estuarine water samples collected during fish kill and fish lesion events. These tools should enhance efforts to characterize these organisms and their ecological relationships. Heteroduplex mobility assay-directed sequence discovery is broadly applicable, and may be adapted for the detection of genomic sequence data of other novel or nonculturable organisms in complex assemblages.

  1. The Blue Bottle Revisited.

    ERIC Educational Resources Information Center

    Vandaveer, Walter R., IV; Mosher, Mel

    1997-01-01

    Presents a modification of the classic Blue Bottle demonstration that involves the alkaline glucose reduction of methylene blue. Uses other indicators in the classic Blue Bottle to produce a rainbow of colors. (JRH)

  2. Harmful Algal Bloom Webinar

    EPA Pesticide Factsheets

    The problem is complex. Excessive nitrogen and phosphorous levels can cause harmful algal blooms. Different algal/cyanobacteria strains bloom under different conditions. Different strains produce different toxins at varying amounts.

  3. Stopping the Bottle

    MedlinePlus

    ... is coming later. The next week, eliminate another bottle feeding and provide milk in a cup instead. Try to do this when your baby is sitting at the table in a high chair. Generally, the last bottle to stop should be the nighttime bottle. That ...

  4. Near- and mid-infrared spectroscopic determination of algal composition

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The objective of this study was to investigate the feasibility of using near-infrared reflectance spectroscopy (NIRS) and mid-infrared reflectance spectroscopy (MIRS) to determine the composition of algal samples. We assayed a set of algal biomass samples (n=117), collected from algae turf scrubber...

  5. Evaluation of PCR-Reverse Blot Hybridization Assay, REBA Sepsis-ID Test, for Simultaneous Identification of Bacterial Pathogens and mecA and van Genes from Blood Culture Bottles

    PubMed Central

    Park, Soon Deok; Lee, Gyusang; Wang, Hye-young; Park, Min; Kim, Sunghyun; Kim, Hyunjung; Kim, Jungho; Kim, Young Keun; Kim, Hyo Youl; Lee, Hyeyoung

    2014-01-01

    Background The aim of this study was to evaluate a newly developed PCR-based reverse blot hybridization assay (PCR-REBA), REBA Sepsis-ID (M&D, Wonju, Korea), to rapidly detect the presence of bacteremia and antimicrobial resistance gene in blood culture samples. Methods One thousand four hundred consecutive blood culture samples from patients with a delta neutrophil index greater than 2.7% were selected from March to July in 2013. Three hundred positive and 1,100 negative for bacterial growth in blood culture bottles samples were tested by conventional and real-time PCR-REBA, respectively. Results The overall agreement between the conventional identification test and the REBA Sepsis-ID test was 95.3% (286/300). Agreement for gram-positive bacteria, gram-negative bacteria, fungi, and polymicrobials was 94.5% (190/201), 97.3% (71/73), 100% (14/14), and 91.7% (11/12), respectively. The detection rate of the mecA gene from methicillin-resistant Staphylococcus isolates was 97.8% (90/92). The vanA gene was detected in one blood culture sample from which vancomycin-resistant Enterococcus was isolated. When the cycle threshold for real-time PCR was defined as 30.0, 2.4% (26/1,100) of negative blood culture samples tested positive by real-time PCR. Conclusions The REBA Sepsis-ID test is capable of simultaneously and quickly detecting both causative agents and antimicrobial resistance genes, such as mecA and van, in blood culture positive samples. PMID:25368820

  6. Harmful Algal Blooms

    USGS Publications Warehouse

    Graham, Jennifer L.

    2007-01-01

    What are Harmful Algal Blooms (HABs)? Freshwater and marine harmful algal blooms (HABs) can occur anytime water use is impaired due to excessive accumulations of algae. HAB occurrence is affected by a complex set of physical, chemical, biological, hydrological, and meteorological conditions making it difficult to isolate specific causative environmental factors. Potential impairments include reduction in water quality, accumulation of malodorous scums in beach areas, algal production of toxins potent enough to poison both aquatic and terrestrial organisms, and algal production of taste-and-odor compounds that cause unpalatable drinking water and fish. HABs are a global problem, and toxic freshwater and (or) marine algae have been implicated in human and animal illness and death in over 45 countries worldwide and in at least 27 U.S. States (Yoo and others, 1995; Chorus and Bartram, 1999; Huisman and others, 2005).

  7. Indicators: Algal Toxins (microcystin)

    EPA Pesticide Factsheets

    Algal toxins are toxic substances released by some types of algae (phytoplankton) when they are present in large quantities (blooms) and decay or degrade. High nutrient levels and warm temperatures often result in favorable conditions for algae blooms.

  8. Stopping the Bottle

    MedlinePlus

    ... cavities or cause your child to drink more milk than he or she needs. Switching from bottle ... when doctors recommend switching from formula to cow's milk. It can be a natural transition to offer ...

  9. BOTTLE MATERIAL AND CLEANSING PROCEDURES OF INFANT FEEDING BOTTLES.

    PubMed

    Kuan, Wen-Hui; Chen, Yi-Lang

    2016-01-01

    The cleanliness of feeding bottles is vital for child health. Although machine cleansing of bottles in the food industry has been established, mechanical and manual cleansing methods are highly variable. This study was undertaken to determine the differences in the cleanliness of bottles that were cleaned using various combinations of bottle materials [glass and polypropylene (PP)], rinsing water volumes (1/3, 1/2, and 2/3 capacity of a bottle), and sustained shaking times (5 seconds and 20 seconds). Total organic carbon (TOC) and conductivity measurements were respectively used to evaluate the rinsed quantities of organic and inorganic formula residue from feeding bottles. The results indicated that glass bottles filled with rinsing water to 2/3 of their capacity showed the most efficient cleansing performance. However, the PP bottles exhibited a relatively poor cleansing result, particularly for organic cleanliness. The organic residue tends to accumulate on the PP bottle interior because of the aggregation of compounds with similar properties. The shaking time hardly influenced the cleanliness. The glass bottle was superior to the PP bottle in both organic and inorganic cleanliness, and organic constituents were more difficult to rinse from the bottle than the inorganic constituents were.

  10. Energy implications of bottled water

    NASA Astrophysics Data System (ADS)

    Gleick, P. H.; Cooley, H. S.

    2009-01-01

    As bottled water use continues to expand around the world, there is growing interest in the environmental, economical, and social implications of that use, including concerns about waste generation, proper use of groundwater, hydrologic effects on local surface and groundwater, economic costs, and more. A key concern is how much energy is required to produce and use bottled water. This paper estimates the energy footprint required for various phases of bottled water production, transportation, and use. We do not develop a single comprehensive life-cycle energy estimate because of differences among water sources, bottling processes, transportation costs, and other factors, but we quantify key energy inputs necessary for site-specific assessments. We also apply these inputs to three site-specific examples of the energy required from production to the point of use: local bottled water produced and used in Los Angeles, water bottled in the South Pacific and shipped by cargo ship to Los Angeles, and water bottled in France and shipped in various ways to Los Angeles. For water transported short distances, the energy requirements of bottled water are dominated by the energy used to produce the plastic bottles. Long-distance transport, however, can lead to energy costs comparable to, or even larger than, those of producing the bottle. All other energy costs—for processing, bottling, sealing, labeling, and refrigeration—are far smaller than those for the production of the bottle and transportation. These data can be used to generate specific estimates for different sources, treatments, and delivery options.

  11. Algal Biofuels Fact Sheet

    SciTech Connect

    2009-10-27

    This fact sheet provides information on algal biofuels, which are generating considerable interest around the world. They may represent a sustainable pathway for helping to meet the U.S. biofuel production targets set by the Energy Independence and Security Act of 2007.

  12. Harmful Algal Blooms Research

    EPA Science Inventory

    This project represents the Agency’s first effort to unify harmful algal blooms (HABs) research that had been previously carried out in isolation within various laboratories. A unified program is the most efficient way generate useful results for the Agency’s decision...

  13. Message in a Bottle

    ERIC Educational Resources Information Center

    Gallagher, Joy

    2008-01-01

    In this article, the author shares a lesson that uses the Message in a Bottle concept. This lesson combines social studies, language arts, technology, and art, particularly studying and drawing portraits and utilizing values within a drawing. As part of their grade-four art curriculum, students are required to correctly proportion the face and the…

  14. Fluid Dynamics of Bottle Filling

    NASA Astrophysics Data System (ADS)

    McGough, Patrick; Gao, Haijing; Appathurai, Santosh; Basaran, Osman

    2011-11-01

    Filling of bottles is a widely practiced operation in a large number of industries. Well known examples include filling of ``large'' bottles with shampoos and cleaners in the household products and beauty care industries and filling of ``small'' bottles in the pharmaceutical industry. Some bottle filling operations have recently drawn much attention from the fluid mechanics community because of the occurrence of a multitude of complex flow regimes, transitions, and instabilities such as mounding and coiling that occur as a bottle is filled with a fluid. In this talk, we present a primarily computational study of the fluid dynamical challenges that can arise during the rapid filling of bottles. Given the diversity of fluids used in filling applications, we consider four representative classes of fluids that exhibit Newtonian, shear-thinning, viscoelastic, and yield-stress rheologies. The equations governing the dynamics of bottle filling are solved either in their full 3D but axisymmetric form or using the slender-jet approximation.

  15. Algal functional annotation tool

    SciTech Connect

    2012-07-12

    Abstract BACKGROUND: Progress in genome sequencing is proceeding at an exponential pace, and several new algal genomes are becoming available every year. One of the challenges facing the community is the association of protein sequences encoded in the genomes with biological function. While most genome assembly projects generate annotations for predicted protein sequences, they are usually limited and integrate functional terms from a limited number of databases. Another challenge is the use of annotations to interpret large lists of 'interesting' genes generated by genome-scale datasets. Previously, these gene lists had to be analyzed across several independent biological databases, often on a gene-by-gene basis. In contrast, several annotation databases, such as DAVID, integrate data from multiple functional databases and reveal underlying biological themes of large gene lists. While several such databases have been constructed for animals, none is currently available for the study of algae. Due to renewed interest in algae as potential sources of biofuels and the emergence of multiple algal genome sequences, a significant need has arisen for such a database to process the growing compendiums of algal genomic data. DESCRIPTION: The Algal Functional Annotation Tool is a web-based comprehensive analysis suite integrating annotation data from several pathway, ontology, and protein family databases. The current version provides annotation for the model alga Chlamydomonas reinhardtii, and in the future will include additional genomes. The site allows users to interpret large gene lists by identifying associated functional terms, and their enrichment. Additionally, expression data for several experimental conditions were compiled and analyzed to provide an expression-based enrichment search. A tool to search for functionally-related genes based on gene expression across these conditions is also provided. Other features include dynamic visualization of genes on KEGG

  16. The photocatalytic enhancement of acrylic and PET solar water disinfection (SODIS) bottles.

    PubMed

    Carey, J M; Perez, T M; Arsiaga, E G; Loetscher, L H; Boyd, J E

    2011-01-01

    The solar water disinfection method (SODIS) was modified by the addition of a photocatalytic layer of titania on the interior surface of polyethylene terephthalate (PET) and acrylic bottles. Titania was solvent deposited on the interior of commercially available PET bottles, as well as bottles that were constructed from acrylic. Uncoated and titania-coated acrylic bottles removed 3,000,000-5,000,000 colony forming units per milliliter of K12 E. coli from 670 mL of contaminated water in 40 min of solar irradiance. After five hours of sunlight exposure, the concentration of 10 ppm methyl orange (a representative organic water contaminant), was reduced by 61% using the titania-coated acrylic bottles. The concentration of 87 ppb microcystin-LR (a representative algal toxin) was reduced by 70% after 7 hours of sunlight exposure in the titania-coated acrylic bottles. Acrylic is an effective alternative to PET for use in the SODIS method due to its greater UV transparency. The addition of titania to PET and acrylic bottles confers the ability to remove chemical contaminants in addition to inactivating microbiological contaminants.

  17. Migration of bisphenol A from plastic baby bottles, baby bottle liners and reusable polycarbonate drinking bottles.

    PubMed

    Kubwabo, C; Kosarac, I; Stewart, B; Gauthier, B R; Lalonde, K; Lalonde, P J

    2009-06-01

    Human exposure to bisphenol A (BPA) has recently received special attention. It has been shown that exposure to BPA may occur through the consumption of beverages or foods that have been in contact with polycarbonate (PC) plastic containers or epoxy resins in food packaging. A BPA migration study was conducted using a variety of plastic containers, including polycarbonate baby bottles, non-PC baby bottles, baby bottle liners, and reusable PC drinking bottles. Water was used to simulate migration into aqueous and acidic foods; 10% ethanol solution to simulate migration to low- and high-alcoholic foods; and 50% ethanol solution to simulate migration to fatty foods. By combining solid-phase extraction, BPA derivatization and analysis by GC-EI/MS/MS, a very low detection limit at the ng l(-1) level was obtained. Migration of BPA at 40 degrees C ranged from 0.11 microg l(-1) in water incubated for 8 h to 2.39 microg l(-1) in 50% ethanol incubated for 240 h. Residual BPA leaching from PC bottles increased with temperature and incubation time. In comparison with the migration observed from PC bottles, non-PC baby bottles and baby bottle liners showed only trace levels of BPA. Tests for leachable lead and cadmium were also conducted on glass baby bottles since these represent a potential alternative to plastic bottles. No detectable lead or cadmium was found to leach from the glass. This study indicated that non-PC plastic baby bottles, baby bottle liners and glass baby bottles might be good alternatives for polycarbonate bottles.

  18. National Algal Biofuels Technology Roadmap

    SciTech Connect

    Ferrell, John; Sarisky-Reed, Valerie

    2010-05-01

    The framework for National Algal Biofuels Technology Roadmap was constructed at the Algal Biofuels Technology Roadmap Workshop, held December 9-10, 2008, at the University of Maryland-College Park. The Workshop was organized by the Biomass Program to discuss and identify the critical challenges currently hindering the development of a domestic, commercial-scale algal biofuels industry. This Roadmap presents information from a scientific, economic, and policy perspectives that can support and guide RD&D investment in algal biofuels. While addressing the potential economic and environmental benefits of using algal biomass for the production of liquid transportation fuels, the Roadmap describes the current status of algae RD&D. In doing so, it lays the groundwork for identifying challenges that likely need to be overcome for algal biomass to be used in the production of economically viable biofuels.

  19. Advanced Algal Systems Fact Sheet

    SciTech Connect

    2016-06-01

    Research and development (R&D) on advanced algal biofuels and bioproducts presents an opportunity to sustainably expand biomass resource potential in the United States. The Bioenergy Technologies Office’s (BETO’s) Advanced Algal Systems Program is carrying out a long-term, applied R&D strategy to lower the costs of algal biofuel production by working with partners to develop revolutionary technologies and conduct crosscutting analyses to better understand the potential

  20. Bottled Water Everywhere: Keeping it Safe

    MedlinePlus

    ... For Consumers Home For Consumers Consumer Updates Bottled Water Everywhere: Keeping it Safe Share Tweet Linkedin Pin ... sanitary conditions back to top Types of Bottled Water FDA describes bottled water as water that’s intended ...

  1. Algal biofuels from wastewater treatment high rate algal ponds.

    PubMed

    Craggs, R J; Heubeck, S; Lundquist, T J; Benemann, J R

    2011-01-01

    This paper examines the potential of algae biofuel production in conjunction with wastewater treatment. Current technology for algal wastewater treatment uses facultative ponds, however, these ponds have low productivity (∼10 tonnes/ha.y), are not amenable to cultivating single algal species, require chemical flocculation or other expensive processes for algal harvest, and do not provide consistent nutrient removal. Shallow, paddlewheel-mixed high rate algal ponds (HRAPs) have much higher productivities (∼30 tonnes/ha.y) and promote bioflocculation settling which may provide low-cost algal harvest. Moreover, HRAP algae are carbon-limited and daytime addition of CO(2) has, under suitable climatic conditions, the potential to double production (to ∼60 tonnes/ha.y), improve bioflocculation algal harvest, and enhance wastewater nutrient removal. Algae biofuels (e.g. biogas, ethanol, biodiesel and crude bio-oil), could be produced from the algae harvested from wastewater HRAPs, The wastewater treatment function would cover the capital and operation costs of algal production, with biofuel and recovered nutrient fertilizer being by-products. Greenhouse gas abatement results from both the production of the biofuels and the savings in energy consumption compared to electromechanical treatment processes. However, to achieve these benefits, further research is required, particularly the large-scale demonstration of wastewater treatment HRAP algal production and harvest.

  2. 27 CFR 19.382 - Bottling tanks.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottling tanks. 19.382... Manufacture of Articles Bottling, Packaging, and Removal of Products § 19.382 Bottling tanks. All spirits shall be bottled from tanks listed and certified as accurately calibrated in the notice of...

  3. Algal Biofuels; Algal Biofuels R&D at NREL (Brochure)

    SciTech Connect

    Not Available

    2010-09-01

    An overview of NREL's algal biofuels projects, including U.S. Department of Energy-funded work, projects with U.S. and international partners, and Laboratory Directed Research and Development projects.

  4. Autoclaving soil samples affects algal-available phosphorus.

    PubMed

    Anderson, Brandon H; Magdoff, Frederick R

    2005-01-01

    Unwanted microbial interference in samples used for biological assays of P availability has routinely been eliminated by autoclaving samples before inoculation with algae. Twenty-three soils were selected to evaluate the relationship between algal growth in P-deficient solutions containing small quantities of soil and the level of P determined by a variety of tests used to evaluate P availability in soils and sediments. Soils were either autoclaved or not before addition to flasks containing P-starved algae in a nutrient solution without P. Compared to non-autoclaved samples, autoclaving soil resulted in approximately 60% more available P as estimated by increased algal growth. However, algal growth in the presence of autoclaved soil was highly correlated with growth in the presence of non-autoclaved samples. There was no consistent change in the correlations (r) between autoclaving or non-autoclaving samples in the relationships of algal numbers with P extracted by a number of soil tests. The effect of autoclaving soil on soluble P was also evaluated for a subset of six soils. Autoclaved soils had significantly greater concentrations of soluble P than non-autoclaved soils, with 78% more orthophosphate monoesters, 60% more orthophosphate diesters, and 54% more soluble inorganic P. Inhibition of algal growth may have occurred with two high-Zn soils that produced relatively low numbers of algae despite being very high in estimated available P by all extraction methods. Removing those samples from the calculations dramatically improved correlations between soil P measured by various methods and algal growth. With these two soils removed from calculations, algal growth with autoclaved soil was most highly correlated with Olsen P (r = 0.95), with other correlations as follows: Fe-oxide strip (r = 0.80), Mehlich 3 (r = 0.75,), modified Morgan (r = 0.61), and Bray-Kurtz 1 (r = 0.57).

  5. 2012 Problem 10: Rocking Bottle

    NASA Astrophysics Data System (ADS)

    Li, Yaohua; Gao, Wenli; Wang, Sihui; Zhou, Huijun

    2015-10-01

    In this paper, the motion of a bottle partly filled with water is investigated. Two stages of motion showing different kinetic properties, named as "moving stage" and "rocking stage", can be clearly identified in the experiment. In the moving stage, the bottle moves forward with a short period vibration, while in the rocking stage, the bottle oscillates with a significantly longer period around a certain spot. Theoretical and numerical methods are employed to explain these phenomena. By simplifying the system into a rigid body model, it is found that in the moving stage, classical mechanical method gives results that fit our experiment well. And the rocking stage is thought to be the result of the asymmetric torque generated by the gravity of a liquid layer adhered to the inside wall of the bottle.

  6. Fueling Future with Algal Genomics

    SciTech Connect

    Grigoriev, Igor

    2012-07-05

    Algae constitute a major component of fundamental eukaryotic diversity, play profound roles in the carbon cycle, and are prominent candidates for biofuel production. The US Department of Energy Joint Genome Institute (JGI) is leading the world in algal genome sequencing (http://jgi.doe.gov/Algae) and contributes of the algal genome projects worldwide (GOLD database, 2012). The sequenced algal genomes offer catalogs of genes, networks, and pathways. The sequenced first of its kind genomes of a haptophyte E.huxleyii, chlorarachniophyte B.natans, and cryptophyte G.theta fill the gaps in the eukaryotic tree of life and carry unique genes and pathways as well as molecular fossils of secondary endosymbiosis. Natural adaptation to conditions critical for industrial production is encoded in algal genomes, for example, growth of A.anophagefferens at very high cell densities during the harmful algae blooms or a global distribution across diverse environments of E.huxleyii, able to live on sparse nutrients due to its expanded pan-genome. Communications and signaling pathways can be derived from simple symbiotic systems like lichens or complex marine algae metagenomes. Collectively these datasets derived from algal genomics contribute to building a comprehensive parts list essential for algal biofuel development.

  7. Breaking beer bottles with cavitation

    NASA Astrophysics Data System (ADS)

    Jung, Sunny; Fontana, Jake; Palffy-Muhoray, Peter; Shelley, Michael

    2009-03-01

    Hitting the top of a beer bottle, nearly full of water, with an open hand can cause the bottle to break, with the bottom separating from upper section. We have studied this phenomenon using a high-speed camera, and observed the formation, coalescence and collapse of bubbles. The breaking of glass is due to cavitation, typically occurring near the bottom edge. We make numerical estimates of the relevant physical parameters, and compare these with experimental observations.

  8. Buying and Caring for Baby Bottles and Nipples

    MedlinePlus

    ... htm Buying and Caring for Baby Bottles and Nipples To use the sharing features on this page, ... bottles and nipples. How to Choose Bottles and Nipples The type of nipple and bottle you choose ...

  9. Exploiting algal NADPH oxidase for biophotovoltaic energy.

    PubMed

    Anderson, Alexander; Laohavisit, Anuphon; Blaby, Ian K; Bombelli, Paolo; Howe, Christopher J; Merchant, Sabeeha S; Davies, Julia M; Smith, Alison G

    2016-01-01

    Photosynthetic microbes exhibit light-dependent electron export across the cell membrane, which can generate electricity in biological photovoltaic (BPV) devices. How electrons are exported remains to be determined; the identification of mechanisms would help selection or generation of photosynthetic microbes capable of enhanced electrical output. We show that plasma membrane NADPH oxidase activity is a significant component of light-dependent generation of electricity by the unicellular green alga Chlamydomonas reinhardtii. NADPH oxidases export electrons across the plasma membrane to form superoxide anion from oxygen. The C. reinhardtii mutant lacking the NADPH oxidase encoded by RBO1 is impaired in both extracellular superoxide anion production and current generation in a BPV device. Complementation with the wild-type gene restores both capacities, demonstrating the role of the enzyme in electron export. Monitoring light-dependent extracellular superoxide production with a colorimetric assay is shown to be an effective way of screening for electrogenic potential of candidate algal strains. The results show that algal NADPH oxidases are important for superoxide anion production and open avenues for optimizing the biological component of these devices.

  10. Algal culture studies for CELSS

    NASA Technical Reports Server (NTRS)

    Radmer, R.; Behrens, P.; Arnett, K.; Gladue, R.; Cox, J.; Lieberman, D.

    1987-01-01

    Microalgae are well-suited as a component of a Closed Environmental Life Support System (CELSS), since they can couple the closely related functions of food production and atmospheric regeneration. The objective was to provide a basis for predicting the response of CELSS algal cultures, and thus the food supply and air regeneration system, to changes in the culture parameters. Scenedesmus growth was measured as a function of light intensity, and the spectral dependence of light absorption by the algae as well as algal respiration in the light were determined as a function of cell concentration. These results were used to test and confirm a mathematical model that describes the productivity of an algal culture in terms of the competing processes of photosynthesis and respiration. The relationship of algal productivity to cell concentration was determined at different carbon dioxide concentrations, temperatures, and light intensities. The maximum productivity achieved by an air-grown culture was found to be within 10% of the computed maximum productivity, indicating that CO2 was very efficiently removed from the gas stream by the algal culture. Measurements of biomass productivity as a function of cell concentration at different light intensities indicated that both the productivity and efficiency of light utilization were greater at higher light intensities.

  11. Optical bottle versus acoustic bottle and antibottle resonators.

    PubMed

    Sumetsky, M

    2017-03-01

    The theory of slow acoustic modes propagating along the optical fiber and being controlled by the nanoscale variation of the effective fiber radius (analogous to the theory of slow optical whispering gallery modes) is developed. Surprisingly, it is shown that, in addition to acoustic bottle resonators (which are similar to optical bottle resonators), there exist antibottle resonators, the neck-shaped deformations of the fiber that can fully confine acoustic modes. It is also shown that an eigenfrequency of the mechanical vibrations of a silica parabolic bottle resonator can match the separation between the eigenfrequencies of a series of its optical modes, thereby enabling the resonant mechanical excitation of these series. The developed theory paves the groundwork for slow-mode optomechanics in an optical fiber.

  12. 27 CFR 25.142 - Bottles.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... TREASURY LIQUORS BEER Marks, Brands, and Labels § 25.142 Bottles. (a) Label requirements. Each bottle of... brewer's name, trade name or brand name includes the name of a city which is not the place where the...

  13. Sapphire Energy - Integrated Algal Biorefinery

    SciTech Connect

    White, Rebecca L.; Tyler, Mike

    2015-07-22

    Sapphire Energy, Inc. (SEI) is a leader in large-scale photosynthetic algal biomass production, with a strongly cohesive research, development, and operations program. SEI takes a multidiscipline approach to integrate lab-based strain selection, cultivation and harvest and production scale, and extraction for the production of Green Crude oil, a drop in replacement for traditional crude oil.. SEI’s technical accomplishments since 2007 have produced a multifunctional platform that can address needs for fuel, feed, and other higher value products. Figure 1 outlines SEI’s commercialization process, including Green Crude production and refinement to drop in fuel replacements. The large scale algal biomass production facility, the SEI Integrated Algal Biorefinery (IABR), was built in Luna County near Columbus, New Mexico (see fig 2). The extraction unit was located at the existing SEI facility in Las Cruces, New Mexico, approximately 95 miles from the IABR. The IABR facility was constructed on time and on budget, and the extraction unit expansion to accommodate the biomass output from the IABR was completed in October 2012. The IABR facility uses open pond cultivation with a proprietary harvesting method to produce algal biomass; this biomass is then shipped to the extraction facility for conversion to Green Crude. The operation of the IABR and the extraction facilities has demonstrated the critical integration of traditional agricultural techniques with algae cultivation knowledge for algal biomass production, and the successful conversion of the biomass to Green Crude. All primary unit operations are de-risked, and at a scale suitable for process demonstration. The results are stable, reliable, and long-term cultivation of strains for year round algal biomass production. From June 2012 to November 2014, the IABR and extraction facilities produced 524 metric tons (MT) of biomass (on a dry weight basis), and 2,587 gallons of Green Crude. Additionally, the IABR

  14. Algal taxonomy forum: Algal Taxonomist, Let Serendipity Reign!

    PubMed

    Druehl, Louis

    2013-04-01

    The publication of a mini-review by Olivier De Clerck et al. in this issue of the Journal of Phycology presented an opportunity to open a dialogue on challenges faced by contemporary algal taxonomists. The Editorial Office solicited the following two additional contributions in response to De Clerck et al.'s paper; the responses were edited solely for clarity, space and format.

  15. 21 CFR 868.5220 - Blow bottle.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Blow bottle. 868.5220 Section 868.5220 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5220 Blow bottle. (a) Identification. A blow bottle is a...

  16. 27 CFR 31.232 - Wine bottling.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Wine bottling. 31.232... OF THE TREASURY ALCOHOL ALCOHOL BEVERAGE DEALERS Miscellaneous § 31.232 Wine bottling. Each person desiring to bottle, package, or repackage taxpaid wines must, before carrying on those operations,...

  17. 27 CFR 31.232 - Wine bottling.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Wine bottling. 31.232... OF THE TREASURY ALCOHOL ALCOHOL BEVERAGE DEALERS Miscellaneous § 31.232 Wine bottling. Each person desiring to bottle, package, or repackage taxpaid wines must, before carrying on those operations,...

  18. 27 CFR 31.232 - Wine bottling.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Wine bottling. 31.232... OF THE TREASURY LIQUORS ALCOHOL BEVERAGE DEALERS Miscellaneous § 31.232 Wine bottling. Each person desiring to bottle, package, or repackage taxpaid wines must, before carrying on those operations,...

  19. 27 CFR 31.232 - Wine bottling.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Wine bottling. 31.232... OF THE TREASURY LIQUORS ALCOHOL BEVERAGE DEALERS Miscellaneous § 31.232 Wine bottling. Each person desiring to bottle, package, or repackage taxpaid wines must, before carrying on those operations,...

  20. 27 CFR 31.232 - Wine bottling.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Wine bottling. 31.232... OF THE TREASURY LIQUORS ALCOHOL BEVERAGE DEALERS Miscellaneous § 31.232 Wine bottling. Each person desiring to bottle, package, or repackage taxpaid wines must, before carrying on those operations,...

  1. 21 CFR 165.110 - Bottled water.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 2 2013-04-01 2013-04-01 false Bottled water. 165.110 Section 165.110 Food and... CONSUMPTION BEVERAGES Requirements for Specific Standardized Beverages § 165.110 Bottled water. (a) Identity—(1) Description. Bottled water is water that is intended for human consumption and that is sealed...

  2. 21 CFR 165.110 - Bottled water.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 2 2012-04-01 2012-04-01 false Bottled water. 165.110 Section 165.110 Food and... CONSUMPTION BEVERAGES Requirements for Specific Standardized Beverages § 165.110 Bottled water. Link to an amendment published at 76 FR 64813, Oct. 19, 2011. (a) Identity—(1) Description. Bottled water is water...

  3. 21 CFR 165.110 - Bottled water.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Bottled water. 165.110 Section 165.110 Food and... CONSUMPTION BEVERAGES Requirements for Specific Standardized Beverages § 165.110 Bottled water. (a) Identity—(1) Description. Bottled water is water that is intended for human consumption and that is sealed...

  4. 21 CFR 165.110 - Bottled water.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 2 2014-04-01 2014-04-01 false Bottled water. 165.110 Section 165.110 Food and... CONSUMPTION BEVERAGES Requirements for Specific Standardized Beverages § 165.110 Bottled water. (a) Identity—(1) Description. Bottled water is water that is intended for human consumption and that is sealed...

  5. Bottled Water Mania: Americas Misguided Infatuation with Bottled Water over Tap Water

    DTIC Science & Technology

    2010-05-01

    Plastic bottles in landfills can take hundreds of years to decompose, causing a profound environmental impact. The oceans are another victim of... plastic bottle waste. The plastic bottles pose threats to marine organisms by damaging their environment and also from accidental consumption. Affected...environment created by the creation of plastic bottles . A shrewd devil’s advocate would argue that creating a stainless steel bottle causes much more

  6. Algal Systems for Hydrogen Photoproduction

    SciTech Connect

    Ghirardi, Maria L

    2015-10-08

    The National Renewable Energy Laboratory (NREL), under the guidance of Drs. Michael Seibert (retired, Fellow Emeritus) and Maria Ghirardi (Fellow), led 15 years of research addressing the issue of algal H2 photoproduction. This project resulted in greatly increased rates and yields of algal hydrogen production; increased understanding of the H2 metabolism in the green alga, Chlamydomonas reinhardtii; expanded our knowledge of other physiological aspects relevant to sustained algal photosynthetic H2 production; led to the genetic identification, cloning and manipulation of algal hydrogenase genes; and contributed to a broader, fundamental understanding of the technical and scientific challenges to improving the conversion efficiencies in order to reach the U.S. Department of Energy’s Fuel Cell Technologies Office’s targets. Some of the tangible results are: (i) 64 publications and 6 patents, (ii) international visibility to NREL, (iii) reinvigoration of national and international biohydrogen research, and (iv) research progress that helped stimulate new funding from other DOE and non-DOE programs, including the AFOSR and the DOE Office of Science.

  7. Soda-Bottle Water Rockets.

    ERIC Educational Resources Information Center

    Kagan, David; And Others

    1995-01-01

    Provides instructions for the construction and launch of a two-liter plastic soda-bottle rocket and presents the author's theory of their motion during launch. Modeled predictions are compared with actual experimental data. Explains theory behind the motion of a water rocket during launch. (LZ)

  8. From Blogs to Bottle Caps

    ERIC Educational Resources Information Center

    Edinger, Ted

    2012-01-01

    There is a wonderful community of art educators connecting a once-isolated profession through blogging. Art educators around the world are sharing ideas and communicating with their peers through this amazing resource. In this article, the author describes the bottle cap mural at Tulip Grove Elementary School which was inspired by this exchange of…

  9. Students Lobby for Bottle Bill.

    ERIC Educational Resources Information Center

    Thompson, Nathan H.

    1980-01-01

    Summarizes the 10-year accomplishments of Students for Environmental Quality from Bellport High School, New York, including successful halting of local waste oil pollution, instigating state laws to prohibit seal killing and protect the Carmans River wetlands, and details current efforts to assist in passage of a state "bottle bill."…

  10. Algal biofuels: challenges and opportunities.

    PubMed

    Leite, Gustavo B; Abdelaziz, Ahmed E M; Hallenbeck, Patrick C

    2013-10-01

    Biodiesel production using microalgae is attractive in a number of respects. Here a number of pros and cons to using microalgae for biofuels production are reviewed. Algal cultivation can be carried out using non-arable land and non-potable water with simple nutrient supply. In addition, algal biomass productivities are much higher than those of vascular plants and the extractable content of lipids that can be usefully converted to biodiesel, triacylglycerols (TAGs) can be much higher than that of the oil seeds now used for first generation biodiesel. On the other hand, practical, cost-effective production of biofuels from microalgae requires that a number of obstacles be overcome. These include the development of low-cost, effective growth systems, efficient and energy saving harvesting techniques, and methods for oil extraction and conversion that are environmentally benign and cost-effective. Promising recent advances in these areas are highlighted.

  11. Algal blooms and public health

    SciTech Connect

    Epstein, P.R. . Harvard Medical School)

    1993-06-01

    Alterations in coastal ecology are expanding the geographic extent, frequency, magnitude, and species complexity'' of algal blooms throughout the world, increasing the threat of fish and shellfish poisonings, anoxia in marine nurseries, and of cholera. The World Health Organization and members of the medical profession have described the potential health effects of global climate change. They warn of the consequences of increased ultraviolet-B (UV-B) rays and of warming: the possible damage to agriculture and nutrition, and the impact on habitats which may alter the distribution of vector-borne and water-based infectious diseases. Algal growth due to increased nitrogen (N) and phosphorus (P) and warming are already affecting marine microflora and aquatic plants; and there is now clear evidence that marine organisms are a reservoir for enteric pathogens. The pattern of cholera in the Western Hemisphere suggests that environmental changes have already begun to influence the epidemiology of this infectious disease. 106 refs.

  12. 27 CFR 31.203 - Possession of used liquor bottles.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... recycling or reclaiming the glass or other approved liquor bottle material. (26 U.S.C. 5301) ... bottles. 31.203 Section 31.203 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Bottles § 31.203 Possession of used liquor bottles. The possession of used liquor bottles by any...

  13. 27 CFR 31.203 - Possession of used liquor bottles.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... recycling or reclaiming the glass or other approved liquor bottle material. (26 U.S.C. 5301) ... bottles. 31.203 Section 31.203 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Bottles § 31.203 Possession of used liquor bottles. The possession of used liquor bottles by any...

  14. 27 CFR 31.203 - Possession of used liquor bottles.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... recycling or reclaiming the glass or other approved liquor bottle material. (26 U.S.C. 5301) ... bottles. 31.203 Section 31.203 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Bottles § 31.203 Possession of used liquor bottles. The possession of used liquor bottles by any...

  15. 27 CFR 31.203 - Possession of used liquor bottles.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... recycling or reclaiming the glass or other approved liquor bottle material. (26 U.S.C. 5301) ... bottles. 31.203 Section 31.203 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Bottles § 31.203 Possession of used liquor bottles. The possession of used liquor bottles by any...

  16. 27 CFR 31.203 - Possession of used liquor bottles.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... recycling or reclaiming the glass or other approved liquor bottle material. (26 U.S.C. 5301) ... bottles. 31.203 Section 31.203 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Bottles § 31.203 Possession of used liquor bottles. The possession of used liquor bottles by any...

  17. CHARGE BOTTLE FOR A MASS SEPARATOR

    DOEpatents

    Davidson, P.H.

    1959-07-01

    Improved mass separator charge bottles are described for containing a dense charge of a chemical compound of copper, nickel, lead or other useful substance which is to be vaporized, and to the method of utilizing such improvcd charge bottles so that the chemical compound is vaporized from the under surface of the charge and thus permits the non-volatile portion thereof to fall to the bottom of the charge bottle where it does not form an obstacle to further evaporation. The charge bottle comprises a vertically disposed cylindrical portion, an inner re-entrant cylindrical portion extending axially and downwardly into the same from the upper end thereof, and evaporative source material in the form of a chemical compound compacted within the upper annular pontion of the charge bottle formed by the re-entrant cylindrical portion, whereby vapor from the chemical compound will pass outwardly from the charge bottle through an apertured closure.

  18. Methods for removing contaminants from algal oil

    SciTech Connect

    Lupton, Francis Stephen

    2016-09-27

    Methods for removing contaminants from algal oil are provided. In an embodiment, a method comprises the steps of combining a sulfuric acid-aqueous solution that has a pH of about 1 or less with a contaminant-containing algal oil at treatment conditions effective to form an effluent. The effluent comprises a treated algal oil phase and contaminants in an acidic aqueous phase. The contaminants comprise metals, phosphorus, or combinations thereof. The acidic aqueous phase is removed from the effluent to form a contaminant-depleted algal oil.

  19. Assessment of bisphenol A released from reusable plastic, aluminium and stainless steel water bottles.

    PubMed

    Cooper, James E; Kendig, Eric L; Belcher, Scott M

    2011-10-01

    Bisphenol A (BPA) is a ubiquitous high volume industrial chemical that is an estrogen and an environmental endocrine disrupting chemical. Bisphenol A is used extensively in the production of consumer goods, polycarbonate plastics, epoxy resins and coatings used to line metallic food and beverage cans. There is great concern regarding the possible harmful effects from exposures that result from BPA leaching into foods and beverages from packaging or storage containers. The objective of this study was to independently assess whether BPA contamination of water was occurring from different types of reusable drinking bottles marketed as alternatives to BPA-containing polycarbonate plastics. Using a sensitive and quantitative BPA-specific competitive enzyme-linked immunosorbent assay we evaluated whether BPA migrated into water stored in polycarbonate or copolyester plastic bottles, and different lined or unlined metallic reusable water bottles. At room temperature the concentration of BPA migrating from polycarbonate bottles ranged from 0.2 to 0.3 mg L⁻¹. Under identical conditions BPA migration from aluminium bottles lined with epoxy-based resins was variable depending on manufacturer ranging from 0.08 to 1.9 mg L⁻¹. Boiling water significantly increased migration of BPA from the epoxy lined bottles. No detectable BPA contamination was observed in water stored in bottles made from Tritan™ copolyester plastic, uncoated stainless steel, or aluminium lined with EcoCare™. The results from this study demonstrate that when used according to manufacturers' recommendations reusable water bottles constructed from "BPA-free" alternative materials are suitable for consumption of beverages free of BPA contamination.

  20. Development of Syringe/Bottle Hybrids for Sampling Slurries

    SciTech Connect

    Coleman, C.J.

    1998-01-08

    A convenient and effective sample bottle system based on simple modifications of disposable plastic syringes and bottles has been devised and tested for slurry samples. Syringe/ bottle hybrids (hereafter referred to as syringe bottles) have the convenience of regular flat-bottom bottles with screw cap closures. In addition, the syringe imparts a sliding and adjustable bottom to the bottle that forces the entire contents from the bottle. The system was designed especially to collect samples for high temperature work-ups of DWPF slurry samples. The syringe bottles together with fixed-bottom sample vial inserts would provide the DWPF with convenient and reliable methods for dealing with slurry samples.

  1. Bottled liquid explosive scanner by near infrared

    NASA Astrophysics Data System (ADS)

    Itozaki, Hideo

    2016-05-01

    A bottled liquid explosive scanner has been developed using near infrared technology for glass or PET bottles and ultrasound technology for metal cans. It has database of near infrared absorbance spectra and sound velocities of various liquids. Scanned liquids can be identified by using this database. This device has been certified by ECAC and installed at Japanese international airport.

  2. EXAMINATION OF BOTTLED WATER FOR NONTUBERCULOUS MYCOBACTERIA

    EPA Science Inventory

    The objective of this study was to examine bottled water for the presence of nontuberculous mycobacteria as a potential source of infection in AIDS patients. Twenty brands of bottled water commonly used in the Los Angeles area were tested for the presence of nontuberculous mycoba...

  3. Gas Property Demonstrations Using Plastic Water Bottles

    ERIC Educational Resources Information Center

    Campbell, Dean J.; Bannon, Stephen J.; Gunter, Molly M.

    2011-01-01

    Plastic water bottles are convenient containers for demonstrations of gas properties illustrating Boyle's law, Charles's law, and Avogadro's law. The contents of iron-based disposable hand warmer packets can be used to remove oxygen gas from the air within an unfilled plastic water bottle.

  4. Algal Bloom Detection from HICO

    NASA Astrophysics Data System (ADS)

    Amin, Ruhul; Gould, Richard

    2014-05-01

    Ocean color satellites provide daily, global views of marine bio-optical properties in the upper ocean at various spatial scales. The most productive area of the global ocean is the coastal zone which is heavily impacted by urban and agricultural runoff, transportation, recreation, and oil and gas production. In recent years, harmful algal blooms (HABs) have become one of the serious environmental problems in the coastal areas on a global scale. The global nature of the problem has expanded in its frequency, severity, and extent over the last several decades. Human activities and population increases have contributed to an increase in various toxic and noxious algal species in the coastal regions worldwide. Eutrophication in estuaries and coastal waters is believed to be the major factor causing HABs. In this study, we assess the applicability of the Red Band Difference (RBD) HAB detection algorithm on data from the Hyperspectral Imager for the Coastal Ocean (HICO). Our preliminary results show that due to various uncertainties such as atmospheric correction, calibration and possibly also the relatively low signal-to-noise ratio of HICO for fluorescence detection, it is difficult to extract the fluorescence portion of the reflectance spectrum that RBD uses for bloom detection. We propose an improved bloom detection technique for HICO using red and NIR bands. Our results are validated using other space-borne and ground based measurements.

  5. NREL Algal Biofuels Projects and Partnerships

    SciTech Connect

    2016-10-01

    This fact sheet highlights several algal biofuels research and development projects focused on improving the economics of the algal biofuels production process. These projects should serve as a foundation for the research efforts toward algae as a source of fuels and other chemicals.

  6. A pilot study comparing opaque, weighted bottles with conventional, clear bottles for infant feeding.

    PubMed

    Ventura, Alison K; Pollack Golen, Rebecca

    2015-02-01

    It is hypothesized that the visual and weight cues afforded by bottle-feeding may lead mothers to overfeed in response to the amount of liquid in the bottle. The aim of the present pilot study was to test this hypothesis by comparing mothers' sensitivity and responsiveness to infant cues and infants' intakes when mothers use opaque, weighted bottles (that remove visual and weight cues) compared to conventional, clear bottles to feed their infants. We also tested the hypothesis that mothers' pressuring feeding style would moderate the effect of bottle type. Formula-feeding dyads (N = 25) visited our laboratory on two separate days. Mothers fed their infants from a clear bottle one day and an opaque, weighted bottle on the other; bottle-order was counterbalanced across the two days. Infant intake was assessed by weighing each bottle before and after the feeding. Maternal sensitivity and responsiveness to infant cues was objectively assessed using the Nursing Child Assessment Feeding Scale. Mothers were significantly more responsive to infant cues when they used opaque compared to clear bottles (p = .04). There was also a trend for infants to consume significantly less formula when fed from opaque compared to clear bottles (p = .08). Mothers' pressuring feeding style moderated the effect of bottle type on maternal responsiveness to infant cues (p = .02) and infant intake (p = .03). Specifically, mothers who reported higher levels of pressuring feeding were significantly more responsive to their infants' cues (p = .02) and fed their infants significantly less formula when using opaque versus clear bottles (p = .01); no differences were seen for mothers who reported lower levels of pressuring feeding. This study highlights a simple, yet effective intervention for improving the bottle-feeding practices of mothers who have pressuring feeding styles.

  7. Constraints to commercialization of algal fuels.

    PubMed

    Chisti, Yusuf

    2013-09-10

    Production of algal crude oil has been achieved in various pilot scale facilities, but whether algal fuels can be produced in sufficient quantity to meaningfully displace petroleum fuels, has been largely overlooked. Limitations to commercialization of algal fuels need to be understood and addressed for any future commercialization. This review identifies the major constraints to commercialization of transport fuels from microalgae. Algae derived fuels are expensive compared to petroleum derived fuels, but this could change. Unfortunately, improved economics of production are not sufficient for an environmentally sustainable production, or its large scale feasibility. A low-cost point supply of concentrated carbon dioxide colocated with the other essential resources is necessary for producing algal fuels. An insufficiency of concentrated carbon dioxide is actually a major impediment to any substantial production of algal fuels. Sustainability of production requires the development of an ability to almost fully recycle the phosphorous and nitrogen nutrients that are necessary for algae culture. Development of a nitrogen biofixation ability to support production of algal fuels ought to be an important long term objective. At sufficiently large scale, a limited supply of freshwater will pose a significant limitation to production even if marine algae are used. Processes for recovering energy from the algal biomass left after the extraction of oil, are required for achieving a net positive energy balance in the algal fuel oil. The near term outlook for widespread use of algal fuels appears bleak, but fuels for niche applications such as in aviation may be likely in the medium term. Genetic and metabolic engineering of microalgae to boost production of fuel oil and ease its recovery, are essential for commercialization of algal fuels. Algae will need to be genetically modified for improved photosynthetic efficiency in the long term.

  8. Revisiting the fog bottle experiment

    NASA Astrophysics Data System (ADS)

    Kamcharean, C.; Khanchong, C.; Wattanakasiwich, P.

    2016-11-01

    In this article we propose an irreversible adiabatic expansion model, modified from previous work, to explain the fog bottle experiment. Our model divides the phenomenon into five thermodynamic states, and we include in our calculation irreversible work pushing a stopper out of the bottle and heat gain from the condensation of saturated vapour. In the experiment, thermodynamic variables including pressure and temperature as functions of time were measured. The work done in pushing the stopper out was measured and the condensation heat was determined using the Clausius-Clapeyron equation to determine saturated vapour pressure. As a result, fog formation was explained through a phase diagram of water showing the saturated vapour pressure during irreversible adiabatic expansion. Also, state variables (P, V and T) and the entropy change of the real process were compared with the reversible and irreversible adiabatic expansion and our modified process. Using a P-T diagram, we show that the amount of reversible work is always higher than the amount of irreversible work, due to dissipative work. According to our modified model, the dissipative work and the heat transferred from condensation cause irreversibility or {{Δ }}{S}{{t}{{o}}{{t}}{{a}}{{l}}}\\gt 0.

  9. 40 CFR 141.101 - Use of bottled water.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 24 2012-07-01 2012-07-01 false Use of bottled water. 141.101 Section... Use of bottled water. Public water systems shall not use bottled water to achieve compliance with an MCL. Bottled water may be used on a temporary basis to avoid unreasonable risk to health....

  10. 27 CFR 24.308 - Bottled or packed wine record.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottled or packed wine... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Records and Reports § 24.308 Bottled or packed wine record. A proprietor who bottles, packs, or receives bottled or packed beverage wine in bond...

  11. 27 CFR 24.308 - Bottled or packed wine record.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Bottled or packed wine... BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL WINE Records and Reports § 24.308 Bottled or packed wine record. A proprietor who bottles, packs, or receives bottled or packed beverage wine in bond...

  12. 27 CFR 24.308 - Bottled or packed wine record.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Bottled or packed wine... BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL WINE Records and Reports § 24.308 Bottled or packed wine record. A proprietor who bottles, packs, or receives bottled or packed beverage wine in bond...

  13. 27 CFR 24.308 - Bottled or packed wine record.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Bottled or packed wine... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Records and Reports § 24.308 Bottled or packed wine record. A proprietor who bottles, packs, or receives bottled or packed beverage wine in bond...

  14. 27 CFR 24.308 - Bottled or packed wine record.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Bottled or packed wine... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Records and Reports § 24.308 Bottled or packed wine record. A proprietor who bottles, packs, or receives bottled or packed beverage wine in bond...

  15. Metabolic systems analysis to advance algal biotechnology.

    PubMed

    Schmidt, Brian J; Lin-Schmidt, Xiefan; Chamberlin, Austin; Salehi-Ashtiani, Kourosh; Papin, Jason A

    2010-07-01

    Algal fuel sources promise unsurpassed yields in a carbon neutral manner that minimizes resource competition between agriculture and fuel crops. Many challenges must be addressed before algal biofuels can be accepted as a component of the fossil fuel replacement strategy. One significant challenge is that the cost of algal fuel production must become competitive with existing fuel alternatives. Algal biofuel production presents the opportunity to fine-tune microbial metabolic machinery for an optimal blend of biomass constituents and desired fuel molecules. Genome-scale model-driven algal metabolic design promises to facilitate both goals by directing the utilization of metabolites in the complex, interconnected metabolic networks to optimize production of the compounds of interest. Network analysis can direct microbial development efforts towards successful strategies and enable quantitative fine-tuning of the network for optimal product yields while maintaining the robustness of the production microbe. Metabolic modeling yields insights into microbial function, guides experiments by generating testable hypotheses, and enables the refinement of knowledge on the specific organism. While the application of such analytical approaches to algal systems is limited to date, metabolic network analysis can improve understanding of algal metabolic systems and play an important role in expediting the adoption of new biofuel technologies.

  16. Sustainable Algal Energy Production and Environmental Remediation

    SciTech Connect

    Cooke, William E.

    2012-07-14

    Overall, our results confirm that wild algal species sequester a wide range of organic and metal contaminants and excess nutrients (PAHs, trace metals, and nutrients) from natural waters, and suggest parameters that could be useful in predicting uptake rates for algae growing on an algal floway or other algal growth systems in the environment or in industrial processes. The implication for various fuel production processes differ with the detailed unit operations involved, and these results will be of use in the developing of scaling experiments for various types of engineering process designs.

  17. Exploring the Utilization of Complex Algal Communities to Address Algal Pond Crash and Increase Annual Biomass Production for Algal Biofuels

    SciTech Connect

    Hamilton, Cyd E.

    2014-03-25

    This white paper briefly reviews the research literature exploring complex algal communities as a means of increasing algal biomass production via increased tolerance, resilience, and resistance to a variety of abiotic and biotic perturbations occurring within harvesting timescales. This paper identifies what data are available and whether more research utilizing complex communities is needed to explore the potential of complex algal community stability (CACS) approach as a plausible means to increase biomass yields regardless of ecological context and resulting in decreased algal-based fuel prices by reducing operations costs. By reviewing the literature for what we do and do not know, in terms of CACS methodologies, this report will provide guidance for future research addressing pond crash phenomena.

  18. High Frequency Monitoring for Harmful Algal Blooms

    EPA Science Inventory

    Harmful algal blooms (HABs) are increasingly becoming a significant ecologic, economic, and social driver in the use of water resources. Cyanobacteria and their toxins play an important role in management decisions for drinking water utilities and public health officials. Online ...

  19. Factsheet: Climate Change and Harmful Algal Blooms

    EPA Pesticide Factsheets

    Climate change is predicted to change many environmental conditions that could affect the properties of fresh and marine waters. These changes could favor the growth of harmful algal blooms and habitat changes.

  20. Eukaryotic algal phytochromes span the visible spectrum

    PubMed Central

    Rockwell, Nathan C.; Duanmu, Deqiang; Martin, Shelley S.; Bachy, Charles; Price, Dana C.; Bhattacharya, Debashish; Worden, Alexandra Z.; Lagarias, J. Clark

    2014-01-01

    Plant phytochromes are photoswitchable red/far-red photoreceptors that allow competition with neighboring plants for photosynthetically active red light. In aquatic environments, red and far-red light are rapidly attenuated with depth; therefore, photosynthetic species must use shorter wavelengths of light. Nevertheless, phytochrome-related proteins are found in recently sequenced genomes of many eukaryotic algae from aquatic environments. We examined the photosensory properties of seven phytochromes from diverse algae: four prasinophyte (green algal) species, the heterokont (brown algal) Ectocarpus siliculosus, and two glaucophyte species. We demonstrate that algal phytochromes are not limited to red and far-red responses. Instead, different algal phytochromes can sense orange, green, and even blue light. Characterization of these previously undescribed photosensors using CD spectroscopy supports a structurally heterogeneous chromophore in the far-red–absorbing photostate. Our study thus demonstrates that extensive spectral tuning of phytochromes has evolved in phylogenetically distinct lineages of aquatic photosynthetic eukaryotes. PMID:24567382

  1. Environmental performance of algal biofuel technology options.

    PubMed

    Vasudevan, Venkatesh; Stratton, Russell W; Pearlson, Matthew N; Jersey, Gilbert R; Beyene, Abraham G; Weissman, Joseph C; Rubino, Michele; Hileman, James I

    2012-02-21

    Considerable research and development is underway to produce fuels from microalgae, one of several options being explored for increasing transportation fuel supplies and mitigating greenhouse gas emissions (GHG). This work models life-cycle GHG and on-site freshwater consumption for algal biofuels over a wide technology space, spanning both near- and long-term options. The environmental performance of algal biofuel production can vary considerably and is influenced by engineering, biological, siting, and land-use considerations. We have examined these considerations for open pond systems, to identify variables that have a strong influence on GHG and freshwater consumption. We conclude that algal biofuels can yield GHG reductions relative to fossil and other biobased fuels with the use of appropriate technology options. Further, freshwater consumption for algal biofuels produced using saline pond systems can be comparable to that of petroleum-derived fuels.

  2. Climate Adaptation and Harmful Algal Blooms

    EPA Pesticide Factsheets

    EPA supports local, state and tribal efforts to maintain water quality. A key element of its efforts is to reduce excess nutrient pollution and the resulting adverse impacts, including harmful algal blooms.

  3. Recent Advances in Algal Genetic Tool Development

    SciTech Connect

    R. Dahlin, Lukas; T. Guarnieri, Michael

    2016-06-24

    The goal of achieving cost-effective biofuels and bioproducts derived from algal biomass will require improvements along the entire value chain, including identification of robust, high-productivity strains and development of advanced genetic tools. Though there have been modest advances in development of genetic systems for the model alga Chlamydomonas reinhardtii, progress in development of algal genetic tools, especially as applied to non-model algae, has generally lagged behind that of more commonly utilized laboratory and industrial microbes. This is in part due to the complex organellar structure of algae, including robust cell walls and intricate compartmentalization of target loci, as well as prevalent gene silencing mechanisms, which hinder facile utilization of conventional genetic engineering tools and methodologies. However, recent progress in global tool development has opened the door for implementation of strain-engineering strategies in industrially-relevant algal strains. Here, we review recent advances in algal genetic tool development and applications in eukaryotic microalgae.

  4. Bottle appeal drifts across the Pacific

    NASA Astrophysics Data System (ADS)

    Ebbesmeyer, Curtis; Ingraham, W. James, Jr.; McKinnon, Richard; Okubo, Akira; Wang, Dong-Ping; Strickland, Richard; Willing, Peter

    Pacific drift currents were used by a group of oceanographers to estimate the path of a drift bottle that was found on a beach of Barkley Sound in Vancouver Island by Richard Strickland on June 10, 1990. The Chinese rice wine bottle, which remained unopened until December 18, 1991, contained six leaflets, one appealing for the release of China's well-known dissident, Wei Jingsheng. The bottle was one of thousands set adrift as part of a propaganda effort from the islands of Quemoy and Matsu off mainland China shortly after Wei was sentenced in 1979 to 15 years in prison (see Figure 1 for locations). Wei was in poor health and still in prison when the bottle made its way across the Pacific Ocean.

  5. NEW APPROACHES: Mechanics from a bottle opener

    NASA Astrophysics Data System (ADS)

    Shipstone, David

    1996-11-01

    The action of a cleverly designed bottle opener known as the Lazyfish provides an excellent illustration of the relationship between work done, force and distance moved, and is thus a useful example in the teaching of mechanics.

  6. Gas Experiments with Plastic Soda Bottles.

    ERIC Educational Resources Information Center

    Kavanah, Patrick; Zipp, Arden P.

    1998-01-01

    Describes the use of an inexpensive device consisting of a plastic soda bottle and a modified plastic cap in a range of demonstrations and experimental activities having to do with the behavior of gases. (Author/WRM)

  7. More Older Women Hitting the Bottle Hard

    MedlinePlus

    ... medlineplus.gov/news/fullstory_164321.html More Older Women Hitting the Bottle Hard Study found dramatic jump ... March 28, 2017 (HealthDay News) -- More older American women than ever are drinking -- and drinking hard, a ...

  8. Direct conversion of algal biomass to biofuel

    DOEpatents

    Deng, Shuguang; Patil, Prafulla D; Gude, Veera Gnaneswar

    2014-10-14

    A method and system for providing direct conversion of algal biomass. Optionally, the method and system can be used to directly convert dry algal biomass to biodiesels under microwave irradiation by combining the reaction and combining steps. Alternatively, wet algae can be directly processed and converted to fatty acid methyl esters, which have the major components of biodiesels, by reacting with methanol at predetermined pressure and temperature ranges.

  9. Possible importance of algal toxins in the Salton Sea, California

    USGS Publications Warehouse

    Reifel, K.M.; McCoy, M.P.; Rocke, T.E.; Tiffany, M.A.; Hurlbert, S.H.; Faulkner, D.J.

    2002-01-01

    In response to wildlife mortality including unexplained eared grebe (Podiceps nigricollis) die-off events in 1992 and 1994 and other mortality events including large fish kills, a survey was conducted for the presence of algal toxins in the Salton Sea. Goals of this survey were to determine if and when algal toxins are present in the Salton Sea and to describe the phytoplankton composition during those times. A total of 29 samples was collected for toxicity analysis from both nearshore and midlake sites visited biweekly from January to December 1999. Dinoflagellates and diatoms dominated most samples, but some were dominated by a prymnesiophyte (Pleurochrysis pseudoroscoffensis) or a raphidophyte (Chattonella marina). Several types of blooms were observed and sampled. The dinoflagellate Gyrodinium uncatenum formed an extensive, dense (up to 310 000 cells ml-1) and long-lasting bloom during the winter in 1999. A coccolithophorid, Pleurochrysis pseudoroscoffensis, occurred at high densities in surface films and nearshore areas during the spring and summer of 1999. These surface films also contained high densities of one or two other species (an unidentified scrippsielloid, Heterocapsa niei, Chattonella marina). Localized blooms were also observed in the Salton Sea. An unknown small dinoflagellate reached high densities (110 000 cells ml-1) inside Varner Harbor, and an unidentified species of Gymnodinium formed a dense (270 000 cells ml-1) band along part of the southern shoreline during the summer. Three species known to produce toxins in other systems were found. Protoceratium reticulatum (=Gonyaulax grindleyi) and Chattonella marina were found in several samples taken during summer months, and Prorocentrum minimum was found in low densities in several samples. Extracts of most samples, including those containing known toxic species, showed a low level (<10% mortality across all concentrations) of activity in the brine shrimp lethality assay and were not considered

  10. Algal and fungal diversity in Antarctic lichens.

    PubMed

    Park, Chae Haeng; Kim, Kyung Mo; Elvebakk, Arve; Kim, Ok-Sun; Jeong, Gajin; Hong, Soon Gyu

    2015-01-01

    The composition of lichen ecosystems except mycobiont and photobiont has not been evaluated intensively. In addition, recent studies to identify algal genotypes have raised questions about the specific relationship between mycobiont and photobiont. In the current study, we analyzed algal and fungal community structures in lichen species from King George Island, Antarctica, by pyrosequencing of eukaryotic large subunit (LSU) and algal internal transcribed spacer (ITS) domains of the nuclear rRNA gene. The sequencing results of LSU and ITS regions indicated that each lichen thallus contained diverse algal species. The major algal operational taxonomic unit (OTU) defined at a 99% similarity cutoff of LSU sequences accounted for 78.7-100% of the total algal community in each sample. In several cases, the major OTUs defined by LSU sequences were represented by two closely related OTUs defined by 98% sequence similarity of ITS domain. The results of LSU sequences indicated that lichen-associated fungi belonged to the Arthoniomycetes, Eurotiomycetes, Lecanoromycetes, Leotiomycetes, and Sordariomycetes of the Ascomycota, and Tremellomycetes and Cystobasidiomycetes of the Basidiomycota. The composition of major photobiont species and lichen-associated fungal community were mostly related to the mycobiont species. The contribution of growth forms or substrates on composition of photobiont and lichen-associated fungi was not evident.

  11. Effect of bottling and storage on the migration of plastic constituents in Spanish bottled waters.

    PubMed

    Guart, Albert; Bono-Blay, Francisco; Borrell, Antonio; Lacorte, Silvia

    2014-08-01

    Bottled water is packaged in either glass or, to a large extent, in plastic bottles with metallic or plastic caps of different material, shape and colour. Plastic materials are made of one or more monomers and several additives that can eventually migrate into water, either during bottle manufacturing, water filling or storage. The main objective of the present study was to carry out a comprehensive assessment of the quality of the Spanish bottled water market in terms of (i) migration of plastic components or additives during bottling and during storage and (ii) evaluation of the effect of the packaging material and bottle format on the migration potential. The compounds investigated were 5 phthalates, diethylhexyl adipate, alkylphenols and bisphenol A. A set of 362 bottled water samples corresponding to 131 natural mineral waters and spring waters sources and 3 treated waters of several commercial brands were analysed immediately after bottling and after one-year storage (a total of 724 samples). Target compounds were detected in 5.6% of the data values, with diethyl hexyl phthalate and bisphenol A being the most ubiquitous compounds detected. The total daily intake was estimated and a comparison with reference values was indicated.

  12. Isolation of AHL-degrading bacteria from micro-algal cultures and their impact on algal growth and on virulence of Vibrio campbellii to prawn larvae.

    PubMed

    Pande, Gde Sasmita Julyantoro; Natrah, Fatin Mohd Ikhsan; Flandez, Ace Vincent Bravo; Kumar, Uday; Niu, Yufeng; Bossier, Peter; Defoirdt, Tom

    2015-12-01

    Inactivation of quorum sensing (QS) signal molecules, such as acylhomoserine lactones (AHLs) of pathogenic bacteria, has been proposed as a novel method to combat bacterial diseases in aquaculture. Despite the importance of micro-algae for aquaculture, AHL degradation by bacteria associated with micro-algal cultures has thus far not been investigated. In this study, we isolated Pseudomonas sp. NFMI-T and Bacillus sp. NFMI-C from open cultures of the micro-algae Tetraselmis suecica and Chaetoceros muelleri, respectively. An AHL degradation assay showed that either monocultures or co-cultures of the isolates were able to degrade the AHL N-hexanoyl-L-homoserine lactone. In contrast, only Bacillus sp. NFMI-C was able to inactivate N-hydroxybutanoyl-L-homoserine lactone, the AHL produced by Vibrio campbellii. The isolated bacteria were able to persist for up to 3 weeks in conventionalized micro-algal cultures, indicating that they were able to establish and maintain themselves within open algal cultures. Using gnotobiotic algal cultures, we found that the isolates did not affect growth of the micro-algae from which they were isolated, whereas a mixture of both isolates increased the growth of Tetraselmis and decreased the growth of Chaetoceros. Finally, addition of Bacillus sp. NFMI-C to the rearing water of giant river prawn (Macrobrachium rosenbergii) larvae significantly improved survival of the larvae when challenged with pathogenic V. campbellii, whereas it had no effect on larval growth.

  13. Algal Supply System Design - Harmonized Version

    SciTech Connect

    Abodeely, Jared; Stevens, Daniel; Ray, Allison; Newby, Deborah; Schaller, Kastli

    2013-03-01

    The objective of this design report is to provide an assessment of current technologies used for production, dewatering, and converting microalgae cultivated in open-pond systems to biofuel. The original draft design was created in 2011 and has subsequently been brought into agreement with the DOE harmonized model. The design report extends beyond this harmonized model to discuss some of the challenges with assessing algal production systems, including the ability to (1) quickly assess alternative algal production system designs, (2) assess spatial and temporal variability, and (3) perform large-scale assessments considering multiple scenarios for thousands of potential sites. The Algae Logistics Model (ALM) was developed to address each of these limitations of current modeling efforts to enable assessment of the economic feasibility of algal production systems across the United States. The (ALM) enables (1) dynamic assessments using spatiotemporal conditions, (2) exploration of algal production system design configurations, (3) investigation of algal production system operating assumptions, and (4) trade-off assessments with technology decisions and operating assumptions. The report discusses results from the ALM, which is used to assess the baseline design determined by harmonization efforts between U.S. DOE national laboratories. Productivity and resource assessment data is provided by coupling the ALM with the Biomass Assessment Tool developed at PNNL. This high-fidelity data is dynamically passed to the ALM and used to help better understand the impacts of spatial and temporal constraints on algal production systems by providing a cost for producing extracted algal lipids annually for each potential site.

  14. Comparative assessment of genotoxicity of mineral water packed in polyethylene terephthalate (PET) and glass bottles.

    PubMed

    Ceretti, Elisabetta; Zani, Claudia; Zerbini, Ilaria; Guzzella, Licia; Scaglia, Mauro; Berna, Vanda; Donato, Francesco; Monarca, Silvano; Feretti, Donatella

    2010-03-01

    The potential migration of genotoxic compounds into mineral water stored in polyethylene terephthalate (PET) bottles was evaluated by an integrated chemical/biological approach using short-term toxicity/genotoxicity tests and chemical analysis. Six commercial brands of still and carbonated mineral water bottled in PET and in glass were stored at 40 degrees C for 10 days in a stove according to the standard EEC total migration test (82/711/EEC), or at room temperature in the dark. After treatment, the samples were analysed using gas-chromatography/mass spectrometry (GC/MS) to detect volatile and non-volatile compounds, the Microtox test to evaluate potential toxicity of the samples, and three mutagenicity tests -Tradescantia and Allium cepa micronucleus tests and the Comet assay on human leukocytes - to detect their genotoxic activity. GC/MS analysis did not detect phthalates or acetaldehyde in the water samples. The Microtox test found no toxic effects. Mutagenicity tests detected genotoxic properties of some samples in both PET and glass bottles. Statistical analyses showed a positive association between mineral content and mutagenicity (micronuclei in A. cepa and DNA damage in human leukocytes). No clear effect of treatment and PET bottle was found. These results suggest the absence of toxic compounds migrating from PET regardless of time and conditions of storage. In conclusion, bottle material and stove treatment were not associated with the genotoxic properties of the water; the genotoxic effects detected in bottled water may be related to the characteristics of the water (minerals and CO(2) content).

  15. ARRAYS OF BOTTLES OF PLUTONIUM NITRATE SOLUTION

    SciTech Connect

    Margaret A. Marshall

    2012-09-01

    In October and November of 1981 thirteen approaches-to-critical were performed on a remote split table machine (RSTM) in the Critical Mass Laboratory of Pacific Northwest Laboratory (PNL) in Richland, Washington using planar arrays of polyethylene bottles filled with plutonium (Pu) nitrate solution. Arrays of up to sixteen bottles were used to measure the critical number of bottles and critical array spacing with a tight fitting Plexiglas® reflector on all sides of the arrays except the top. Some experiments used Plexiglas shells fitted around each bottles to determine the effect of moderation on criticality. Each bottle contained approximately 2.4 L of Pu(NO3)4 solution with a Pu content of 105 g Pu/L and a free acid molarity H+ of 5.1. The plutonium was of low 240Pu (2.9 wt.%) content. These experiments were sponsored by Rockwell Hanford Operations because of the lack of experimental data on the criticality of arrays of bottles of Pu solution such as might be found in storage and handling at the Purex Facility at Hanford. The results of these experiments were used “to provide benchmark data to validate calculational codes used in criticality safety assessments of [the] plant configurations” (Ref. 1). Data for this evaluation were collected from the published report (Ref. 1), the approach to critical logbook, the experimenter’s logbook, and communication with the primary experimenter, B. Michael Durst. Of the 13 experiments preformed 10 were evaluated. One of the experiments was not evaluated because it had been thrown out by the experimenter, one was not evaluated because it was a repeat of another experiment and the third was not evaluated because it reported the critical number of bottles as being greater than 25. Seven of the thirteen evaluated experiments were determined to be acceptable benchmark experiments. A similar experiment using uranyl nitrate was benchmarked as U233-SOL-THERM-014.

  16. Algal Energy Conversion and Capture

    NASA Astrophysics Data System (ADS)

    Hazendonk, P.

    2015-12-01

    We address the potential for energy conversions and capture for: energy generation; reduction in energy use; reduction in greenhouse gas emissions; remediation of water and air pollution; protection and enhancement of soil fertility. These processes have the potential to sequester carbon at scales that may have global impact. Energy conversion and capture strategies evaluate energy use and production from agriculture, urban areas and industries, and apply existing and emerging technologies to reduce and recapture energy embedded in waste products. The basis of biocrude production from Micro-algal feedstocks: 1) The nutrients from the liquid fraction of waste streams are concentrated and fed into photo bioreactors (essentially large vessels in which microalgae are grown) along with CO2 from flue gasses from down stream processes. 2) The algae are processed to remove high value products such as proteins and beta-carotenes. The advantage of algae feedstocks is the high biomass productivity is 30-50 times that of land based crops and the remaining biomass contains minimal components that are difficult to convert to biocrude. 3) The remaining biomass undergoes hydrothermal liquefaction to produces biocrude and biochar. The flue gasses of this process can be used to produce electricity (fuel cell) and subsequently fed back into the photobioreactor. The thermal energy required for this process is small, hence readily obtained from solar-thermal sources, and furthermore no drying or preprocessing is required keeping the energy overhead extremely small. 4) The biocrude can be upgraded and refined as conventional crude oil, creating a range of liquid fuels. In principle this process can be applied on the farm scale to the municipal scale. Overall, our primary food production is too dependent on fossil fuels. Energy conversion and capture can make food production sustainable.

  17. High-Throughput Biosensor Discriminates Between Different Algal H2-Photoproducing Strains

    SciTech Connect

    Wecker, Matt S. A.; Maria L. Ghirardi

    2014-02-27

    A number of species of microalgae and cyanobacteria photosynthetically produce H2 gas by coupling water oxidation with the reduction of protons to molecular hydrogen, generating renewable energy from sunlight and water. Photosynthetic H2 production, however, is transitory, and there is considerable interest in increasing and extending it for commercial applications. Here we report a Petri-plate version of our previous, microplate-based assay that detects photosynthetic H2 production by algae. The assay consists of an agar overlay of H2-sensing Rhodobacter capsulatus bacteria carrying a green fluorescent protein that responds to H2 produced by single algal colonies in the bottom agar layer. The assay distinguishes between algal strains that photoproduce H2 at different levels under high light intensities, and it does so in a simple, inexpensive, and high-throughput manner. The assay will be useful for screening both natural populations and mutant libraries for strains having increased H2 production, and useful for identifying various genetic factors that physiologically or genetically alter algal hydrogen production.

  18. Agrobacterium-mediated transformation of bottle gourd (Lagenaria siceraria Standl.).

    PubMed

    Han, J-S; Kim, C K; Park, S H; Hirschi, K D; Mok, I- G

    2005-03-01

    We describe a procedure for producing transgenic bottle gourd plants by inoculating cotyledon explants with Agrobacterium tumefaciens strain AGL1 that carries the binary vector pCAMBIA3301 containing a glufosinate ammonium-resistance (bar) gene and the beta-D-glucuronidase (GUS) reporter gene. The most effective bacterial infection was observed when cotyledon explants of 4-day-old seedlings were co-cultivated with Agrobacterium for 6-8 days on co-cultivation medium supplemented with 0.1-0.001 mg/l L-alpha-(2-aminoethoxyvinyl) glycine (AVG). The putatively transformed shoots directly emerged at the proximal end of cotyledon explants after 2-3 weeks of culturing on selection medium containing 2 mg/l DL-phosphinothricin. These shoots were rooted after 3 weeks of culturing on half-strength MS medium containing 0.1 mg/l indole acetic acid and 1 mg/l DL-phosphinothricin. Transgenic plants were obtained at frequencies of 1.9%. Stable integration and transmission of the transgenes in T1 generation plants were confirmed by a histochemical GUS assay, polymerase chain reaction and Southern blot analyses. Genetic segregation analysis of T1 progenies showed that transgenes were inherited in a Mendelian fashion. To our knowledge, this study is the first to show Agrobacterium-mediated transformation in bottle gourd.

  19. Effect of temperature on the release of intentionally and non-intentionally added substances from polyethylene terephthalate (PET) bottles into water: chemical analysis and potential toxicity.

    PubMed

    Bach, Cristina; Dauchy, Xavier; Severin, Isabelle; Munoz, Jean-François; Etienne, Serge; Chagnon, Marie-Christine

    2013-08-15

    The purpose of this study was to investigate the impact of temperature on the release of PET-bottle constituents into water and to assess the potential health hazard using in vitro bioassays with bacteria and human cell lines. Aldehydes, trace metals and other compounds found in plastic packaging were analysed in PET-bottled water stored at different temperatures: 40, 50, and 60°C. In this study, temperature and the presence of CO2 increased the release of formaldehyde, acetaldehyde and antimony (Sb). In parallel, genotoxicity assays (Ames and micronucleus assays) and transcriptional-reporter gene assays for estrogenic and anti-androgenic activity were performed on bottled water extracts at relevant consumer exposure levels. As expected, and in accordance with the chemical formulations specified for PET bottles, neither phthalates nor UV stabilisers were present in the water extracts. However, 2,4-di-tert-butylphenol, a degradation compound of phenolic antioxidants, was detected. In addition, an intermediary monomer, bis(2-hydroxyethyl)terephthalate, was found but only in PET-bottled waters. None of the compounds are on the positive list of EU Regulation No. 10/2011. However, the PET-bottled water extracts did not induce any cytotoxic, genotoxic or endocrine-disruption activity in the bioassays after exposure.

  20. Bisphenol A is released from polycarbonate drinking bottles and mimics the neurotoxic actions of estrogen in developing cerebellar neurons.

    PubMed

    Le, Hoa H; Carlson, Emily M; Chua, Jason P; Belcher, Scott M

    2008-01-30

    The impact of endocrine disrupting chemical (EDC) exposure on human health is receiving increasingly focused attention. The prototypical EDC bisphenol A (BPA) is an estrogenic high-production chemical used primarily as a monomer for the production of polycarbonate and epoxy resins. It is now well established that there is ubiquitous human exposure to BPA. In the general population, exposure to BPA occurs mainly by consumption of contaminated foods and beverages that have contacted epoxy resins or polycarbonate plastics. To test the hypothesis that bioactive BPA was released from polycarbonate bottles used for consumption of water and other beverages, we evaluated whether BPA migrated into water stored in new or used high-quality polycarbonate bottles used by consumers. Using a sensitive and quantitative competitive enzyme-linked immunosorbent assay, BPA was found to migrate from polycarbonate water bottles at rates ranging from 0.20 ng/h to 0.79 ng/h. At room temperature the migration of BPA was independent of whether or not the bottle had been previously used. Exposure to boiling water (100 degrees C) increased the rate of BPA migration by up to 55-fold. The estrogenic bioactivity of the BPA-like immunoreactivity released into the water samples was confirmed using an in vitro assay of rapid estrogen signaling and neurotoxicity in developing cerebellar neurons. The amounts of BPA found to migrate from polycarbonate drinking bottles should be considered as a contributing source to the total "EDC-burden" to which some individuals are exposed.

  1. Algal swimming velocities signal fatty acid accumulation.

    PubMed

    Hansen, Travis J; Hondzo, Miki; Mashek, Mara T; Mashek, Douglas G; Lefebvre, Paul A

    2013-01-01

    The use of microalgae for biofuel production will be beneficial to society if we can produce biofuels at large scales with minimal mechanical energy input in the production process. Understanding micro-algal physiological responses under variable environmental conditions in bioreactors is essential for the optimization of biofuel production. We demonstrate that measuring micro-algal swimming speed provides information on culture health and total fatty acid accumulation. Three strains of Chlamydomonas reinhardtii were grown heterotrophically on acetate and subjected to various levels of nitrogen starvation. Other nutrient levels were explored to determine their effect on micro-algal kinetics. Swimming velocities were measured with two-dimensional micro-particle tracking velocimetry. The results show an inverse linear relationship between normalized total fatty acid mass versus swimming speed of micro-algal cells. Analysis of RNA sequencing data confirms these results by demonstrating that the biological processes of cell motion and the generation of energy precursors are significantly down-regulated. Experiments demonstrate that changes in nutrient concentration in the surrounding media also affect swimming speed. The findings have the potential for the in situ and indirect assessment of lipid content by measuring micro-algal swimming kinetics.

  2. Platy algal banks: Modern and ancient

    SciTech Connect

    Brinton, L. )

    1990-05-01

    Plaly algal banks and associated cycles in the lower Ismay zone of the Paradox Formation are exposed along the walls of the San Juan River canyon, southeastern Utah. These complexes closely resemble algal bank reservoirs in the lower Ismay zone of Ismay and Cache, and possibly other Paradox basin fields. Similarities include facies relationships, lateral and vertical textural variations, and early diagenesis. Extensive algal banks exposed along the San Juan canyon generally have flat bases and mound and swale topographic surfaces, and are separated by interbank channels. The surficial mounds have a regular amplitude and wavelength suggesting a hydrologic rather than biologic influence on topography. The banks themselves, however, are believed to be thick, predominantly in-situ accumulations of platy algae. Distribution of algal banks can be mapped on a field scale; mound and swale topographic features may be identified in core on the basis of depositional and early diagenetic characteristics. Halimeda bioherms (Holocene) cover large areas behind the Great Barrier Reef, developing adjacent to the deep passes that separate the individual reefs. These large in-situ accumulations (20-50 m deep) display similar bank geometries, interbank features, topographic features, vertical textural sequence (including porosity type and distribution), and facies relationships to algal banks observed in the outcropping and subsurface Paradox Formation. Although the hydrodynamic and paleobathymetric settings differ markedly between these two examples, analogies between the mounds themselves are very close. The resemblance lends relevance to exploration and development drilling.

  3. Liquid explosive detection from outside of the bottle by IR

    NASA Astrophysics Data System (ADS)

    Itozaki, Hideo; Yamauchi, Yuji

    2009-05-01

    Liquid explosives have been used in terrorism recently. Inspection of bottles becomes very important, because these liquid explosive or it raw materials can be carried by bottles easily. Hydrogen peroxide is typical raw materials of liquid explosives. It was difficult to evaluate concentration of hydrogen peroxide in the drink in the bottle, because of similarity of its optical properties to those of water. Using near infrared spectrum and multivariate statistical analysis, concentration of percent order of hydrogen peroxide in the bottle can be evaluated from outside of the bottle instantly. Hydrogen peroxide has been detected in not only a clear PET or glass bottle but also a colored glass bottle. Hydrogen peroxide mixed by soft drink such as coke or orange juice with pulp also detected by this method easily. This technique can be applied to inspection of a bottle at airport security so on.

  4. ''Neither fish nor fowl'' EEC draft on bottle recycling

    SciTech Connect

    Not Available

    1980-05-20

    It is reported that an EEC directive on drinks bottle recycling is expected to be announced shortly. The directive is expected to call for member countries to make arrangements for the compulsory return of beer and soft drinks bottles.

  5. Transformation of algal turf by echinoids and scarid fishes on French Polynesian coral reefs

    NASA Astrophysics Data System (ADS)

    Harmelin-Vivien, Mireille L.; Peyrot-Clausade, Mireille; Romano, Jean-Claude

    1992-04-01

    The respective roles of regular echinoids and scarid fishes in the transformation of turf algae, the main food resource for reef herbivores, were investigated on French Polynesian coral reefs. The role of one species of parrotfish ( Scarus sordidus) was compared with that of four species of echinoids. The degree and ways of degradation of the algal matter were determined by the organic matter percentage, the composition of the sugar fraction, and the concentration and composition of chlorophylltype pigments as assayed by HPLC analysis. Chemical analyses were performed on anterior and posterior intestines for scarids, intestinal contents and faeces for echinoids, and on fresh algal turf as a control of initial food quality. A decrease in mean percentage of organic matter in gut content was observed from intestine (9.7%) to faeces (7%) in sea urchins, but not in parrotfishes. The total sugar fraction decreased from fresh algal turf (32% of total organic matter) to echinoid (28%) to scarid (18%) gut contents. The ratio of insoluble to soluble sugars (I/S ratios) was higher in echinoids (2.6) than in scarid gut contents (1.0). A decrease in the total pigment concentration was measured from fresh algal turf to echinoid and it was found to be even lower in scarid gut contents. Chromatograms showed that the composition of chlorophyll-type pigments in scarid intestines was very similar to fresh algal turf, with a dominance of native forms, mainly chlorophyll a and b. On the contrary, degraded pigment forms dominated in echinoids. The main degraded products were pheophorbides in sea urchins, and chlorophyllides in parrotfishes. These results provided evidence for differentiation in digestive processes occurring in the two types of grazers. Echinoids released higher degraded algal material than did scarids. Thus, these two types of grazers play different roles in the recycling of organic matter on coral reefs.

  6. Algal Biology Toolbox Workshop Summary Report

    SciTech Connect

    None, None

    2016-08-01

    DOE-EERE's Bioenergy Technologies Office (BETO) works to accelerate the development of a sustainable, cost-competitive, advanced biofuel industry that can strengthen U.S. energy security, environmental quality, and economic vitality, through research, development, and demonstration projects in partnership with industry, academia, and national laboratory partners. BETO’s Advanced Algal Systems Program (also called the Algae Program) has a long-term applied research and development (R&D) strategy to increase the yields and lower the costs of algal biofuels. The team works with partners to develop new technologies, to integrate technologies at commercially relevant scales, and to conduct crosscutting analyses to better understand the potential and challenges of the algal biofuels industry. Research has indicated that this industry is capable of producing billions of gallons of renewable diesel, gasoline, and jet fuels annually. R&D activities are integrated with BETO’s longstanding effort to accelerate the commercialization of lignocellulosic biofuels.

  7. Critical evaluation and modeling of algal harvesting using dissolved air flotation. DAF Algal Harvesting Modeling

    SciTech Connect

    Zhang, Xuezhi; Hewson, John C.; Amendola, Pasquale; Reynoso, Monica; Sommerfeld, Milton; Chen, Yongsheng; Hu, Qiang

    2014-07-14

    In our study, Chlorella zofingiensis harvesting by dissolved air flotation (DAF) was critically evaluated with regard to algal concentration, culture conditions, type and dosage of coagulants, and recycle ratio. Harvesting efficiency increased with coagulant dosage and leveled off at 81%, 86%, 91%, and 87% when chitosan, Al3+, Fe3+, and cetyl trimethylammonium bromide (CTAB) were used at dosages of 70, 180, 250, and 500 mg g-1, respectively. The DAF efficiency-coagulant dosage relationship changed with algal culture conditions. In evaluating the influence of the initial algal concentration and recycle ratio revealed that, under conditions typical for algal harvesting, we found that it is possible that the number of bubbles is insufficient. A DAF algal harvesting model was developed to explain this observation by introducing mass-based floc size distributions and a bubble limitation into the white water blanket model. Moreover, the model revealed the importance of coagulation to increase floc-bubble collision and attachment, and the preferential interaction of bubbles with larger flocs, which limited the availability of bubbles to the smaller sized flocs. The harvesting efficiencies predicted by the model agree reasonably with experimental data obtained at different Al3+ dosages, algal concentrations, and recycle ratios. Based on this modeling, critical parameters for efficient algal harvesting were identified.

  8. Critical evaluation and modeling of algal harvesting using dissolved air flotation. DAF Algal Harvesting Modeling

    DOE PAGES

    Zhang, Xuezhi; Hewson, John C.; Amendola, Pasquale; ...

    2014-07-14

    In our study, Chlorella zofingiensis harvesting by dissolved air flotation (DAF) was critically evaluated with regard to algal concentration, culture conditions, type and dosage of coagulants, and recycle ratio. Harvesting efficiency increased with coagulant dosage and leveled off at 81%, 86%, 91%, and 87% when chitosan, Al3+, Fe3+, and cetyl trimethylammonium bromide (CTAB) were used at dosages of 70, 180, 250, and 500 mg g-1, respectively. The DAF efficiency-coagulant dosage relationship changed with algal culture conditions. In evaluating the influence of the initial algal concentration and recycle ratio revealed that, under conditions typical for algal harvesting, we found that itmore » is possible that the number of bubbles is insufficient. A DAF algal harvesting model was developed to explain this observation by introducing mass-based floc size distributions and a bubble limitation into the white water blanket model. Moreover, the model revealed the importance of coagulation to increase floc-bubble collision and attachment, and the preferential interaction of bubbles with larger flocs, which limited the availability of bubbles to the smaller sized flocs. The harvesting efficiencies predicted by the model agree reasonably with experimental data obtained at different Al3+ dosages, algal concentrations, and recycle ratios. Based on this modeling, critical parameters for efficient algal harvesting were identified.« less

  9. Kinetics Studies in a Washing Bottle

    NASA Astrophysics Data System (ADS)

    Teggins, John; Mahaffy, Chris

    1997-05-01

    The kinetics of the decomposition of hydrogen peroxide using iodide ion in aqueous solution is studied in sealed completely-filled washing bottles. Oxygen gas produced by the decomposition of the hydrogen peroxide forces liquid out of a bottom feeding washing bottle. After an initiation period of a few minutes at room temperature, the rate at which the liquid is expelled from the spout of the of the washing bottle stabilizes. A comparison of the rates for different reaction concentrations results in a rate law that is approximately first-order with respect to both hydrogen peroxide and iodide concentrations. Because the need for a gas buret to measure oxygen volumes is not necessary, the experiment can be conveniently performed by a student seated in a wheelchair.

  10. Detection of bottled explosives by near infrared

    NASA Astrophysics Data System (ADS)

    Itozaki, Hideo; Sato-Akaba, Hideo

    2013-10-01

    Bottled liquids are not allowed through the security gate in the airport, because liquid explosives have been used by the terrorists. However, passengers have a lot of trouble if they cannot bring their own bottles. For example, a mother would like to carry her own milk in the airplane for her baby. Therefore the detection technology of liquid explosives should be developed as soon as possible. This paper shows that near infrared spectroscopy can detect bottled explosives quickly. The transmission method cannot deal with milk in the sense of liquid inspection. Here we examined the reflection method to the test of milk. The inspection method with light cannot make test for the metal can. We also use ultrasonic method to check metal can simultaneously in order to expand test targets.

  11. Algal recycling enhances algal productivity and settleability in Pediastrum boryanum pure cultures.

    PubMed

    Park, Jason B K; Craggs, Rupert J; Shilton, Andy N

    2015-12-15

    Recycling a portion of gravity harvested algae (i.e. algae and associated bacteria biomass) has been shown to improve both algal biomass productivity and harvest efficiency by maintaining the dominance of a rapidly-settleable colonial alga, Pediastrum boryanum in both pilot-scale wastewater treatment High Rate Algal Ponds (HRAP) and outdoor mesocosms. While algal recycling did not change the relative proportions of algae and bacteria in the HRAP culture, the contribution of the wastewater bacteria to the improved algal biomass productivity and settleability with the recycling was not certain and still required investigation. P. boryanum was therefore isolated from the HRAP and grown in pure culture on synthetic wastewater growth media under laboratory conditions. The influence of recycling on the productivity and settleability of the pure P. boryanum culture was then determined without wastewater bacteria present. Six 1 L P. boryanum cultures were grown over 30 days in a laboratory growth chamber simulating New Zealand summer conditions either with (Pr) or without (Pc) recycling of 10% of gravity harvested algae. The cultures with recycling (Pr) had higher algal productivity than the controls (Pc) when the cultures were operated at both 4 and 3 d hydraulic retention times by 11% and 38% respectively. Furthermore, algal recycling also improved 1 h settleability from ∼60% to ∼85% by increasing the average P. boryanum colony size due to the extended mean cell residence time and promoted formation of large algal bio-flocs (>500 μm diameter). These results demonstrate that the presence of wastewater bacteria was not necessary to improve algal productivity and settleability with algal recycling.

  12. Determinants of using pacifier and bottle feeding

    PubMed Central

    Buccini, Gabriela dos Santos; Benício, Maria Helena D’Aquino; Venancio, Sonia Isoyama

    2014-01-01

    OBJECTIVE To analyze the factors associated with the use of pacifiers and/or bottle feeding in infants aged under one year. METHODS This is a cross-sectional study with 34,366 children and using data from the database of the 2nd Nationwide Survey of Breastfeeding Prevalence performed in the Brazilian capitals and Federal District in 2008. Cluster sampling was used. The questionnaire included questions about the use of artificial nipples in the last 24 hours. The analysis considered three outcomes: exclusive use of pacifier, exclusive use of bottle feeding, and use of artificial nipples (pacifier and bottle feeding). Prevalence ratios were obtained using Poisson regression with robust variance following a hierarchical model. RESULTS The following factors were associated with exclusive use of the pacifier: mother working outside the home, primiparity, child was not breastfed within the first hour, and child had consumed tea on the first day at home. The following factors were associated with exclusive use of bottle feeding: mother working outside the home, primiparity, low birth weight, child not breastfed within the first hour, and child had consumed milk formula and tea on the first day at home. The following factors were associated with use of artificial nipples (pacifier and bottle feeding): mother working outside the home, primiparity, cesarean delivery, the male gender, low birth weight, born in a hospital not accredited as “baby friendly”, required health baby monitoring in the Primary Health Care Unit (PR = 0.91), and child had consumed milk formula, water, or tea on the first day at home. CONCLUSIONS This study identified profiles of exclusive users of pacifiers, bottle feeding, and both. The provided information can guide preventive practices for child health. PMID:25210816

  13. Harmful Algal Blooms – Special Sampling and Response Actions

    EPA Pesticide Factsheets

    The Harmful Algal Blooms – Special Sampling and Response Actions webpage contains information about Background on Harmful Algae in Surface Waters and What to Do if Your System Has Indicators of an Algal Bloom.

  14. 27 CFR 19.749 - Bottling and packaging record.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottling and packaging record. 19.749 Section 19.749 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Account § 19.749 Bottling and packaging record. The bottling and packaging record shall be prepared...

  15. [Quality standards and hygienic problems of bottled drinking-water].

    PubMed

    Zhao, Qing; Shu, Weiqun; Gao, Jingsheng

    2004-05-01

    The consumption of bottled drinking-water increases worldwide and relevant regulation for inspection and supervision work of bottled drinking-water were established in many countries. However, regulation mentioned above is lower than that for tap water. The hygienic problems of bottled drinking-water is emphasized, especially on microbial contamination. In this paper, some issues in regards were reviewed and discussed.

  16. 27 CFR 24.256 - Bottle aging wine.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Bottle aging wine. 24.256 Section 24.256 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT... of Wine § 24.256 Bottle aging wine. Wine bottled or packed and stored for the purpose of aging...

  17. 27 CFR 24.256 - Bottle aging wine.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottle aging wine. 24.256 Section 24.256 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT... of Wine § 24.256 Bottle aging wine. Wine bottled or packed and stored for the purpose of aging...

  18. 27 CFR 24.256 - Bottle aging wine.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Bottle aging wine. 24.256 Section 24.256 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT... of Wine § 24.256 Bottle aging wine. Wine bottled or packed and stored for the purpose of aging...

  19. 27 CFR 24.256 - Bottle aging wine.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Bottle aging wine. 24.256 Section 24.256 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT... of Wine § 24.256 Bottle aging wine. Wine bottled or packed and stored for the purpose of aging...

  20. 27 CFR 24.256 - Bottle aging wine.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Bottle aging wine. 24.256 Section 24.256 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT... of Wine § 24.256 Bottle aging wine. Wine bottled or packed and stored for the purpose of aging...

  1. 27 CFR 28.102 - Bottles to have closures affixed.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Bottles to have closures... Transportation to a Manufacturing Bonded Warehouse § 28.102 Bottles to have closures affixed. Every bottle containing distilled spirits to be withdrawn under the provisions of this subpart shall have a closure...

  2. 27 CFR 28.102 - Bottles to have closures affixed.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottles to have closures... Transportation to a Manufacturing Bonded Warehouse § 28.102 Bottles to have closures affixed. Every bottle containing distilled spirits to be withdrawn under the provisions of this subpart shall have a closure...

  3. 27 CFR 28.102 - Bottles to have closures affixed.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Bottles to have closures... Transportation to a Manufacturing Bonded Warehouse § 28.102 Bottles to have closures affixed. Every bottle containing distilled spirits to be withdrawn under the provisions of this subpart shall have a closure...

  4. 27 CFR 28.102 - Bottles to have closures affixed.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Bottles to have closures... Transportation to a Manufacturing Bonded Warehouse § 28.102 Bottles to have closures affixed. Every bottle containing distilled spirits to be withdrawn under the provisions of this subpart shall have a closure...

  5. 27 CFR 28.102 - Bottles to have closures affixed.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Bottles to have closures... Transportation to a Manufacturing Bonded Warehouse § 28.102 Bottles to have closures affixed. Every bottle containing distilled spirits to be withdrawn under the provisions of this subpart shall have a closure...

  6. 21 CFR 1250.42 - Water systems; constant temperature bottles.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Water systems; constant temperature bottles. 1250...; constant temperature bottles. (a) The water system, whether of the pressure or gravity type, shall be... at all times as to prevent contamination of the water. (e) Constant temperature bottles and...

  7. 21 CFR 1250.42 - Water systems; constant temperature bottles.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Water systems; constant temperature bottles. 1250...; constant temperature bottles. (a) The water system, whether of the pressure or gravity type, shall be... at all times as to prevent contamination of the water. (e) Constant temperature bottles and...

  8. 21 CFR 1250.42 - Water systems; constant temperature bottles.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Water systems; constant temperature bottles. 1250...; constant temperature bottles. (a) The water system, whether of the pressure or gravity type, shall be... at all times as to prevent contamination of the water. (e) Constant temperature bottles and...

  9. 21 CFR 1250.42 - Water systems; constant temperature bottles.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Water systems; constant temperature bottles. 1250...; constant temperature bottles. (a) The water system, whether of the pressure or gravity type, shall be... at all times as to prevent contamination of the water. (e) Constant temperature bottles and...

  10. 21 CFR 1250.42 - Water systems; constant temperature bottles.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Water systems; constant temperature bottles. 1250...; constant temperature bottles. (a) The water system, whether of the pressure or gravity type, shall be... at all times as to prevent contamination of the water. (e) Constant temperature bottles and...

  11. Teaching Science: "Building" a Balloon in a Bottle.

    ERIC Educational Resources Information Center

    Leyden, Michael B.

    1993-01-01

    Describes a science experiment in which students place a balloon into an empty plastic soda bottle, some of which have holes in the bottom, pull the open end over the rim and attempt to inflate it. Only students whose bottles have holes in the bottom will be able to inflate the balloon, because of the air in the bottle. (MDM)

  12. 27 CFR 24.255 - Bottling or packing wine.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Bottling or packing wine..., DEPARTMENT OF THE TREASURY ALCOHOL WINE Storage, Treatment and Finishing of Wine Bottling, Packing, and Labeling of Wine § 24.255 Bottling or packing wine. (a) General. Proprietors of a bonded wine premises...

  13. 27 CFR 24.255 - Bottling or packing wine.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Bottling or packing wine..., DEPARTMENT OF THE TREASURY LIQUORS WINE Storage, Treatment and Finishing of Wine Bottling, Packing, and Labeling of Wine § 24.255 Bottling or packing wine. (a) General. Proprietors of a bonded wine premises...

  14. 27 CFR 24.255 - Bottling or packing wine.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Bottling or packing wine..., DEPARTMENT OF THE TREASURY LIQUORS WINE Storage, Treatment and Finishing of Wine Bottling, Packing, and Labeling of Wine § 24.255 Bottling or packing wine. (a) General. Proprietors of a bonded wine premises...

  15. 27 CFR 24.255 - Bottling or packing wine.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottling or packing wine..., DEPARTMENT OF THE TREASURY LIQUORS WINE Storage, Treatment and Finishing of Wine Bottling, Packing, and Labeling of Wine § 24.255 Bottling or packing wine. (a) General. Proprietors of a bonded wine premises...

  16. 27 CFR 24.255 - Bottling or packing wine.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Bottling or packing wine..., DEPARTMENT OF THE TREASURY ALCOHOL WINE Storage, Treatment and Finishing of Wine Bottling, Packing, and Labeling of Wine § 24.255 Bottling or packing wine. (a) General. Proprietors of a bonded wine premises...

  17. Stability of micafungin sodium solutions at different concentrations in glass bottles and syringes.

    PubMed

    Briot, Thomas; Vrignaud, Sandy; Lagarce, Frédéric

    2015-08-15

    Micafungin is a costly treatment and packaging of 50 mg or 100 mg bottles only are available, while doses lower than 5 mg and 20 mg are often necessary in neonates and paediatrics patients, respectively. The stability of micafungin sodium in polypropylene syringes and glass bottles was studied at different concentrations. Solutions of micafungin diluted with NaCl 0.9% were prepared in glass bottles (20 and 10 mg/mL) or syringes (1 and 0.5 mg/mL) and stored at 25 °C, 60% humidity (RH), in the dark (ICH conditions). Solutions were also exposed to heat (70 °C) or alkaline solution (NaOH) in order to force degradation. Samples were analysed at days 1, 5, 8 (for bottles) and also 15 (for syringes) after the preparation and assayed in triplicate. Stability was studied using a stability-indicating high-performance liquid chromatographic method. Syringes stored at 25 °C retained over 90% of their initial concentration over the study period. Temperature and alkaline conditions had significant effect on the stability of micafungin, leading to apparition of degradation products. Moreover, sub visible particles were in the specification of the European Pharmacopeia along 15 days. To conclude, micafungin diluted in NaCl 0.9% and stored in polypropylene syringes was chemically stable for at least 15 days at 25 °C in the dark.

  18. Water bottle rocket in undergraduate laboratory

    NASA Astrophysics Data System (ADS)

    Schultz, William

    2012-11-01

    In the winter semester of 2012, we implemented the modeling and testing of a water bottle rocket in ME 495, the Senior Laboratory in Mechanical Engineering at the University of Michigan. The four week lab was the most well received by the students in recent memory. There were significant challenges, but the result was a thorough review of their undergraduate fluids class with some advanced concepts such as directional stability of a projectile. The student teams designed their own rockets based on one of many standard 20 ounce soft drink bottles. The culminating contest brought impressive results and a surprise ending.

  19. Bottle Gourd (Lagenaria Siceraria) Juice Poisoning.

    PubMed

    Rathi, Pravin M; Patel, Pinakin S

    2016-10-01

    We present the case of a young woman who presented to us with multiple episodes of vomiting, followed by hematemesis and abdominal pain after consuming bottle gourd juice. The patient was resuscitated and stabilized with fluids, proton pump inhibitors and antiemetics and discharged in stable condition. As a member of the Cucurbitaceae family, bottle gourd contains toxic tetracyclic triterpenoid compounds called cucurbitacins which are responsible for the bitter taste and toxicity. There is no known antidote for this toxicity, and clinicians treat such patients symptomatically only.

  20. Recent Advances in Algal Genetic Tool Development

    DOE PAGES

    R. Dahlin, Lukas; T. Guarnieri, Michael

    2016-06-24

    The goal of achieving cost-effective biofuels and bioproducts derived from algal biomass will require improvements along the entire value chain, including identification of robust, high-productivity strains and development of advanced genetic tools. Though there have been modest advances in development of genetic systems for the model alga Chlamydomonas reinhardtii, progress in development of algal genetic tools, especially as applied to non-model algae, has generally lagged behind that of more commonly utilized laboratory and industrial microbes. This is in part due to the complex organellar structure of algae, including robust cell walls and intricate compartmentalization of target loci, as well asmore » prevalent gene silencing mechanisms, which hinder facile utilization of conventional genetic engineering tools and methodologies. However, recent progress in global tool development has opened the door for implementation of strain-engineering strategies in industrially-relevant algal strains. Here, we review recent advances in algal genetic tool development and applications in eukaryotic microalgae.« less

  1. Algal production in wastewater treatment high rate algal ponds for potential biofuel use.

    PubMed

    Park, J B K; Craggs, R J

    2011-01-01

    Wastewater treatment High Rate Algal Ponds with CO2 addition could provide cost-effective and efficient tertiary-level wastewater treatment with the co-benefit of algal biomass production for biofuel use. Wastewater grown algal biomass can have a lipid content of 10-30% of dry weight, which could be used to make biodiesel. This research investigated algal biomass and total lipid production by two pilot-scale wastewater treatment HRAP(S) (4-day HRT) with and without CO2 addition under New Zealand mid summer (Nov-Jan) conditions. The influence of CO2 addition on wastewater treatment performance was also determined. CO2 was added to one of the HRAPs (the HRAP(E)) by maintaining the maximum pH of the pond below 8. Measurements of HRAP influent and effluent water qualities, total lipid content and algal biomass production were made twice a week over the experimental period. Both HRAP(S) achieved high levels of organic compound and nutrient removal, with >85% SBOD5, >92 NH4(+)-N and >70% DRP removal. Algal/bacterial biomass production in the HRAP(E) (15.2 g/m2/d) was improved by CO2 addition by approximately 30% compared with that of the control HRAP(W) (10.6 g/m2/d). Total lipid content of the biomass grown on both HRAP(S) was slightly reduced (from 25% to 20%) with CO2 addition and the maximum total lipid content of approximately 40% was observed in the HRAP(W) when low NH4(+)-N concentration (<0.5 mg/L) and high maximum pH (>10.0) occurred. Total lipid content of the biomass increased by approximately 15% under nitrogen limiting conditions, however, overall algal/bacterial biomass production was reduced by half during the period of nitrogen limitation. More research is required to maintain algal production under near nitrogen-limiting conditions.

  2. 21 CFR 868.5220 - Blow bottle.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Blow bottle. 868.5220 Section 868.5220 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES... that is intended for medical purposes to induce a forced expiration from a patient. The patient...

  3. 21 CFR 868.5220 - Blow bottle.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Blow bottle. 868.5220 Section 868.5220 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES... that is intended for medical purposes to induce a forced expiration from a patient. The patient...

  4. Dr. von Braun Discusses 'Bottle Suit' Concept

    NASA Technical Reports Server (NTRS)

    1954-01-01

    Dr. Wernher von Braun (center), then Chief of the Guided Missile Development Division at Redstone Arsenal, Alabama, discusses a 'bottle suit' model with Dr. Heinz Haber (left), an expert on aviation medicine, and Willey Ley, a science writer on rocketry and space exploration. The three men were at the Disney studios appearing in the motion picture, entitled 'Man in Space.'

  5. 27 CFR 19.352 - Bottling tanks.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Bottling tanks. 19.352 Section 19.352 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Processing of Distilled Spirits Rules for...

  6. 27 CFR 19.352 - Bottling tanks.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Bottling tanks. 19.352 Section 19.352 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Processing of Distilled Spirits Rules for...

  7. 27 CFR 19.352 - Bottling tanks.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Bottling tanks. 19.352 Section 19.352 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL DISTILLED SPIRITS PLANTS Processing of Distilled Spirits Rules for...

  8. 27 CFR 19.352 - Bottling tanks.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Bottling tanks. 19.352 Section 19.352 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL DISTILLED SPIRITS PLANTS Processing of Distilled Spirits Rules for...

  9. 27 CFR 4.26 - Estate bottled.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Estate bottled. 4.26 Section 4.26 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS LABELING AND ADVERTISING OF WINE Standards of Identity for Wine § 4.26...

  10. 27 CFR 4.26 - Estate bottled.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Estate bottled. 4.26 Section 4.26 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL LABELING AND ADVERTISING OF WINE Standards of Identity for Wine § 4.26...

  11. 27 CFR 4.26 - Estate bottled.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Estate bottled. 4.26 Section 4.26 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS LABELING AND ADVERTISING OF WINE Standards of Identity for Wine § 4.26...

  12. 27 CFR 4.26 - Estate bottled.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Estate bottled. 4.26 Section 4.26 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS LABELING AND ADVERTISING OF WINE Standards of Identity for Wine § 4.26...

  13. 27 CFR 4.26 - Estate bottled.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Estate bottled. 4.26 Section 4.26 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL LABELING AND ADVERTISING OF WINE Standards of Identity for Wine § 4.26...

  14. Algal toxins alter copepod feeding behavior.

    PubMed

    Hong, Jiarong; Talapatra, Siddharth; Katz, Joseph; Tester, Patricia A; Waggett, Rebecca J; Place, Allen R

    2012-01-01

    Using digital holographic cinematography, we quantify and compare the feeding behavior of free-swimming copepods, Acartia tonsa, on nutritional prey (Storeatula major) to that occurring during exposure to toxic and non-toxic strains of Karenia brevis and Karlodinium veneficum. These two harmful algal species produce polyketide toxins with different modes of action and potency. We distinguish between two different beating modes of the copepod's feeding appendages-a "sampling beating" that has short durations (<100 ms) and involves little fluid entrainment and a longer duration "grazing beating" that persists up to 1200 ms and generates feeding currents. The durations of both beating modes have log-normal distributions. Without prey, A. tonsa only samples the environment at low frequency. Upon introduction of non-toxic food, it increases its sampling time moderately and the grazing period substantially. On mono algal diets for either of the toxic dinoflagellates, sampling time fraction is high but the grazing is very limited. A. tonsa demonstrates aversion to both toxic algal species. In mixtures of S. major and the neurotoxin producing K. brevis, sampling and grazing diminish rapidly, presumably due to neurological effects of consuming brevetoxins while trying to feed on S. major. In contrast, on mixtures of cytotoxin producing K. veneficum, both behavioral modes persist, indicating that intake of karlotoxins does not immediately inhibit the copepod's grazing behavior. These findings add critical insight into how these algal toxins may influence the copepod's feeding behavior, and suggest how some harmful algal species may alter top-down control exerted by grazers like copepods.

  15. Algal Toxins Alter Copepod Feeding Behavior

    PubMed Central

    Hong, Jiarong; Talapatra, Siddharth; Katz, Joseph; Tester, Patricia A.; Waggett, Rebecca J.; Place, Allen R.

    2012-01-01

    Using digital holographic cinematography, we quantify and compare the feeding behavior of free-swimming copepods, Acartia tonsa, on nutritional prey (Storeatula major) to that occurring during exposure to toxic and non-toxic strains of Karenia brevis and Karlodinium veneficum. These two harmful algal species produce polyketide toxins with different modes of action and potency. We distinguish between two different beating modes of the copepod’s feeding appendages–a “sampling beating” that has short durations (<100 ms) and involves little fluid entrainment and a longer duration “grazing beating” that persists up to 1200 ms and generates feeding currents. The durations of both beating modes have log-normal distributions. Without prey, A. tonsa only samples the environment at low frequency. Upon introduction of non-toxic food, it increases its sampling time moderately and the grazing period substantially. On mono algal diets for either of the toxic dinoflagellates, sampling time fraction is high but the grazing is very limited. A. tonsa demonstrates aversion to both toxic algal species. In mixtures of S. major and the neurotoxin producing K. brevis, sampling and grazing diminish rapidly, presumably due to neurological effects of consuming brevetoxins while trying to feed on S. major. In contrast, on mixtures of cytotoxin producing K. veneficum, both behavioral modes persist, indicating that intake of karlotoxins does not immediately inhibit the copepod’s grazing behavior. These findings add critical insight into how these algal toxins may influence the copepod’s feeding behavior, and suggest how some harmful algal species may alter top-down control exerted by grazers like copepods. PMID:22629336

  16. Liquid explosive detection from outside of the bottle by NIR

    NASA Astrophysics Data System (ADS)

    Itozaki, Hideo; Yamauchi, Yuji

    2009-09-01

    Liquid explosives have recently been used in terrorism. Inspection of bottles has become very important, because these liquid explosives and their raw materials can be easily carried in bottles. Hydrogen peroxide is a typical raw material of liquid explosives. It was difficult to evaluate the concentration of hydrogen peroxide a bottled drink, because of the similarity of its optical properties to those of water. Using the near-infrared spectrum and multivariate statistical analysis, concentrations of a percent order of hydrogen peroxide can be evaluated from outside of the bottle instantly. Hydrogen peroxide has been detected not only in clear PET or glass bottles but also in colored glass bottles. Hydrogen peroxide mixed with soft drink such as coke or orange juice with pulp was also easily detected by this method. This technique can be applied to the inspection of bottles at airport security and so on.

  17. Health beliefs about bottled water: a qualitative study

    PubMed Central

    Ward, Lorna A; Cain, Owen L; Mullally, Ryan A; Holliday, Kathryn S; Wernham, Aaron GH; Baillie, Paul D; Greenfield, Sheila M

    2009-01-01

    Background There has been a consistent rise in bottled water consumption over the last decade. Little is known about the health beliefs held by the general public about bottled water as this issue is not addressed by the existing quantitative literature. The purpose of this study was to improve understanding of the public's health beliefs concerning bottled mineral water, and the extent to which these beliefs and other views they hold, influence drinking habits. Methods A qualitative study using semi-structured interviews, with 23 users of the Munrow Sports Centre on the University of Birmingham campus. Results Health beliefs about bottled water could be classified as general or specific beliefs. Most participants believed that bottled water conferred general health benefits but were unsure as to the nature of these. In terms of specific health beliefs, the idea that the minerals in bottled water conferred a health benefit was the most commonly cited. There were concerns over links between the plastic bottle itself and cancer. Participants believed that bottled water has a detrimental effect on the environment. Convenience, cost and taste were influential factors when making decisions as to whether to buy bottled water; health beliefs were unimportant motivating factors. Conclusion The majority of participants believed that bottled water has some health benefits. However, these beliefs played a minor role in determining bottled water consumption and are unlikely to be helpful in explaining recent trends in bottled water consumption if generalised to the UK population. The health beliefs elicited were supported by scientific evidence to varying extents. Most participants did not feel that bottled water conferred significant, if any, health benefits over tap water. PMID:19545357

  18. Coupling of Algal Biofuel Production with Wastewater

    PubMed Central

    Panwar, Amit; Bisht, Tara Singh; Tamta, Sushma

    2014-01-01

    Microalgae have gained enormous consideration from scientific community worldwide emerging as a viable feedstock for a renewable energy source virtually being carbon neutral, high lipid content, and comparatively more advantageous to other sources of biofuels. Although microalgae are seen as a valuable source in majority part of the world for production of biofuels and bioproducts, still they are unable to accomplish sustainable large-scale algal biofuel production. Wastewater has organic and inorganic supplements required for algal growth. The coupling of microalgae with wastewater is an effective way of waste remediation and a cost-effective microalgal biofuel production. In this review article, we will primarily discuss the possibilities and current scenario regarding coupling of microalgal cultivation with biofuel production emphasizing recent progress in this area. PMID:24982930

  19. Coupling of algal biofuel production with wastewater.

    PubMed

    Bhatt, Neha Chamoli; Panwar, Amit; Bisht, Tara Singh; Tamta, Sushma

    2014-01-01

    Microalgae have gained enormous consideration from scientific community worldwide emerging as a viable feedstock for a renewable energy source virtually being carbon neutral, high lipid content, and comparatively more advantageous to other sources of biofuels. Although microalgae are seen as a valuable source in majority part of the world for production of biofuels and bioproducts, still they are unable to accomplish sustainable large-scale algal biofuel production. Wastewater has organic and inorganic supplements required for algal growth. The coupling of microalgae with wastewater is an effective way of waste remediation and a cost-effective microalgal biofuel production. In this review article, we will primarily discuss the possibilities and current scenario regarding coupling of microalgal cultivation with biofuel production emphasizing recent progress in this area.

  20. Algal diseases: spotlight on a black box.

    PubMed

    Gachon, Claire M M; Sime-Ngando, Télesphore; Strittmatter, Martina; Chambouvet, Aurélie; Kim, Gwang Hoon

    2010-11-01

    Like any other living organisms, algae are plagued by diseases caused by fungi, protists, bacteria or viruses. As aquaculture continues to rise worldwide, pathogens of nori or biofuel sources are becoming a significant economic burden. Parasites are also increasingly being considered of equal importance with predators for ecosystem functioning. Altered disease patterns in disturbed environments are blamed for sudden extinctions, regime shifts, and spreading of alien species. Here we review the biodiversity and impact of pathogens and parasites of aquatic primary producers in freshwater and marine systems. We also cover recent advances on algal defence reactions, and discuss how emerging technologies can be used to reassess the profound, multi-faceted, and so far broadly-overlooked influence of algal diseases on ecosystem properties.

  1. Copepod Trajectory Characteristics in Thin Layers of Toxic Algal Exudates

    NASA Astrophysics Data System (ADS)

    Webster, D. R.; True, A. C.; Weissburg, M. J.; Yen, J.

    2013-11-01

    Recently documented thin layers of toxic phytoplankton (``cryptic blooms'') are modeled in a custom flume system for copepod behavioral assays. Planar laser-induced fluorescence (LIF) measurements quantify the spatiotemporal structure of the chemical layers ensuring a close match to in situ bloom conditions and allowing for quantification of threshold dissolved toxin levels that induce behavioral responses. Assays with the copepods Acartia tonsa (hop-sinker) and Temora longicornis (cruiser) in thin layers of toxic exudates from the common dinoflagellate Karenia brevis (cell equivalent ~ 1 - 10,000 cells/mL) examine the effects of dissolved toxic compounds and copepod species on swimming trajectory characteristics. Computation of parameters such as swimming speed and the fractal dimension of the two-dimensional trajectory (F2D) allows for statistical evaluation of copepod behavioral responses to dissolved toxic compounds associated with harmful algal blooms (HABs). Changes in copepod swimming behavior caused by toxic compounds can significantly influence predator, prey, and mate encounter rates by altering the fracticality (``diffuseness'' or ``volume-fillingness'') of a copepod's trajectory. As trophic mediators linking primary producers and higher trophic levels, copepods can significantly influence HAB dynamics and modulate large scale ecological effects through their behavioral interactions with toxic blooms.

  2. Copper desorption from Gelidium algal biomass.

    PubMed

    Vilar, Vítor J P; Botelho, Cidália M S; Boaventura, Rui A R

    2007-04-01

    Desorption of divalent copper from marine algae Gelidium sesquipedale, an algal waste (from agar extraction industry) and a composite material (the algal waste immobilized in polyacrylonitrile) was studied in a batch system. Copper ions were first adsorbed until saturation and then desorbed by HNO(3) and Na(2)EDTA solutions. Elution efficiency using HNO(3) increases as pH decreases. At pH=1, for a solid to liquid ratio S/L=4gl(-1), elution efficiency was 97%, 95% and 88%, the stoichiometric coefficient for the ionic exchange, 0.70+/-0.02, 0.73+/-0.05 and 0.76+/-0.06 and the selectivity coefficient, 0.93+/-0.07, 1.0+/-0.3 and 1.1+/-0.3, respectively, for algae Gelidium, algal waste and composite material. Complexation of copper ions by EDTA occurs in a molar proportion of 1:1 and the elution efficiency increases with EDTA concentration. For concentrations of 1.4, 0.88 and 0.57 mmoll(-1), the elution efficiency for S/L=4gl(-1), was 91%, 86% and 78%, respectively, for algae Gelidium, algal waste and composite material. The S/L ratio, in the range 1-20gl(-1), has little influence on copper recovery by using 0.1M HNO(3). Desorption kinetics was very fast for all biosorbents. Kinetic data using HNO(3) as eluant were well described by the mass transfer model, considering the average metal concentration in the solid phase and the equilibrium relationship given by the mass action law. The homogeneous diffusion coefficient varied between 1.0 x 10(-7)cm(2)s(-1) for algae Gelidium and 3.0 x 10(-7)cm(2)s(-1) for the composite material.

  3. Collection and conversion of algal lipid

    NASA Astrophysics Data System (ADS)

    Lin, Ching-Chieh

    Sustainable economic activities mandate a significant replacement of fossil energy by renewable forms. Algae-derived biofuels are increasingly seen as an alternative source of energy with potential to supplement the world's ever increasing demand. Our primary objective is, once the algae were cultivated, to eliminate or make more efficient energy-intensive processing steps of collection, drying, grinding, and solvent extraction prior to conversion. To overcome the processing barrier, we propose to streamline from cultivated algae to biodiesel via algal biomass collection by sand filtration, cell rupturing with ozone, and immediate transesterification. To collect the algal biomass, the specific Chlorococcum aquaticum suspension was acidified to pH 3.3 to promote agglomeration prior to sand filtration. The algae-loaded filter bed was drained of free water and added with methanol and ozonated for 2 min to rupture cell membrane to accelerate release of the cellular contents. The methanol solution now containing the dissolved lipid product was collected by draining, while the filter bed was regenerated by further ozonation when needed. The results showed 95% collection of the algal biomass from the suspension and a 16% yield of lipid from the algae, as well as restoration of filtration velocity of the sand bed via ozonation. The results further showed increased lipid yield upon cell rupturing and transesterified products composed entirely of fatty acid methyl ester (FAME) compounds, demonstrating that the rupture and transesterification processes could proceed consecutively in the same medium, requiring no separate steps of drying, extraction, and conversion. The FAME products from algae without exposure to ozone were mainly of 16 to 18 carbons containing up to 3 double bonds, while those from algae having been ozonated were smaller, highly saturated hydrocarbons. The new technique streamlines individual steps from cultivated algal lipid to transesterified products and

  4. Algal Cell Response to Pulsed Waved Stimulation and Its Application to Increase Algal Lipid Production

    PubMed Central

    Savchenko, Oleksandra; Xing, Jida; Yang, Xiaoyan; Gu, Quanrong; Shaheen, Mohamed; Huang, Min; Yu, Xiaojian; Burrell, Robert; Patra, Prabir; Chen, Jie

    2017-01-01

    Generating renewable energy while sequestering CO2 using algae has recently attracted significant research attention, mostly directing towards biological methods such as systems biology, genetic engineering and bio-refining for optimizing algae strains. Other approaches focus on chemical screening to adjust culture conditions or culture media. We report for the first time the physiological changes of algal cells in response to a novel form of mechanical stimulation, or a pulsed wave at the frequency of 1.5 MHz and the duty cycle of 20%. We studied how the pulsed wave can further increase algal lipid production on top of existing biological and chemical methods. Two commonly used algal strains, fresh-water Chlorella vulgaris and seawater Tetraselmis chuii, were selected. We have performed the tests in shake flasks and 1 L spinner-flask bioreactors. Conventional Gravimetric measurements show that up to 20% increase for algal lipid could be achieved after 8 days of stimulation. The total electricity cost needed for the stimulations in a one-liter bioreactor is only one-tenth of a US penny. Gas liquid chromatography shows that the fatty acid composition remains unchanged after pulsed-wave stimulation. Scanning electron microscope results also suggest that pulsed wave stimulation induces shear stress and thus increases algal lipid production. PMID:28186124

  5. Algal Cell Response to Pulsed Waved Stimulation and Its Application to Increase Algal Lipid Production

    NASA Astrophysics Data System (ADS)

    Savchenko, Oleksandra; Xing, Jida; Yang, Xiaoyan; Gu, Quanrong; Shaheen, Mohamed; Huang, Min; Yu, Xiaojian; Burrell, Robert; Patra, Prabir; Chen, Jie

    2017-02-01

    Generating renewable energy while sequestering CO2 using algae has recently attracted significant research attention, mostly directing towards biological methods such as systems biology, genetic engineering and bio-refining for optimizing algae strains. Other approaches focus on chemical screening to adjust culture conditions or culture media. We report for the first time the physiological changes of algal cells in response to a novel form of mechanical stimulation, or a pulsed wave at the frequency of 1.5 MHz and the duty cycle of 20%. We studied how the pulsed wave can further increase algal lipid production on top of existing biological and chemical methods. Two commonly used algal strains, fresh-water Chlorella vulgaris and seawater Tetraselmis chuii, were selected. We have performed the tests in shake flasks and 1 L spinner-flask bioreactors. Conventional Gravimetric measurements show that up to 20% increase for algal lipid could be achieved after 8 days of stimulation. The total electricity cost needed for the stimulations in a one-liter bioreactor is only one-tenth of a US penny. Gas liquid chromatography shows that the fatty acid composition remains unchanged after pulsed-wave stimulation. Scanning electron microscope results also suggest that pulsed wave stimulation induces shear stress and thus increases algal lipid production.

  6. Algal Cell Response to Pulsed Waved Stimulation and Its Application to Increase Algal Lipid Production.

    PubMed

    Savchenko, Oleksandra; Xing, Jida; Yang, Xiaoyan; Gu, Quanrong; Shaheen, Mohamed; Huang, Min; Yu, Xiaojian; Burrell, Robert; Patra, Prabir; Chen, Jie

    2017-02-10

    Generating renewable energy while sequestering CO2 using algae has recently attracted significant research attention, mostly directing towards biological methods such as systems biology, genetic engineering and bio-refining for optimizing algae strains. Other approaches focus on chemical screening to adjust culture conditions or culture media. We report for the first time the physiological changes of algal cells in response to a novel form of mechanical stimulation, or a pulsed wave at the frequency of 1.5 MHz and the duty cycle of 20%. We studied how the pulsed wave can further increase algal lipid production on top of existing biological and chemical methods. Two commonly used algal strains, fresh-water Chlorella vulgaris and seawater Tetraselmis chuii, were selected. We have performed the tests in shake flasks and 1 L spinner-flask bioreactors. Conventional Gravimetric measurements show that up to 20% increase for algal lipid could be achieved after 8 days of stimulation. The total electricity cost needed for the stimulations in a one-liter bioreactor is only one-tenth of a US penny. Gas liquid chromatography shows that the fatty acid composition remains unchanged after pulsed-wave stimulation. Scanning electron microscope results also suggest that pulsed wave stimulation induces shear stress and thus increases algal lipid production.

  7. A rapid and general method for measurement of protein in micro-algal biomass.

    PubMed

    Slocombe, Stephen P; Ross, Michael; Thomas, Naomi; McNeill, Sharon; Stanley, Michele S

    2013-02-01

    A convenient small-scale extraction method for lyophilized micro-algae is described that dispenses with labor-intensive homogenization and is widely applicable to algae from different phyla. The procedure employs an optimized sequential extraction in trichloroacetic acid (TCA) and NaOH to achieve chemical lysis. Conditions were tested using several micro-algal strains to develop a method that was generally applicable. Incubation of lyophilized material in 24% (w/v) TCA at 95 °C followed by a hot alkaline treatment was found to be effective for strains that are resistant to conventional extraction approaches, such as the Chlorella and the Eustigmatophycean species. The single-tube extraction procedure can be complete in 4h and is conveniently followed by the Lowry assay, requiring a further 30 min. Overall, this method proved to be generally applicable and ideal either for single samples or for high-throughput screening of multiple algal strains for protein content.

  8. Controlling algal growth in photo-dependent decolorant sludge by photocatalysis.

    PubMed

    Hong, Jinglan; Ma, Hua; Otaki, Masahiro

    2005-06-01

    In the treatment of synthetic dye wastewater by photosynthetic bacteria under optical irradiation, excessive algal growth and adhesion on the walls of the reactor are serious problems. The adverse effects of excessive algal growth on photosynthetic bacterial activity are significantly greater than those of the decreased optical irradiation of the solution. In this report, we investigated the effects of photocatalysis on the growth of algae (Chroococcus sp.) and photosynthetic bacteria. The different sensitivities of Chroococcus sp. and photosynthetic bacteria to photocatalysis were observed by an ATP assay. Moreover, from microscopy findings, some algae were damaged by TiO2 with UV. We suggested that some algae suffered from membrane damage and consequently cell substances were released, resulting in the increase of dissolved material following treatment using TiO2 with UV.

  9. Development and application of a marine sediment porewater toxicity test using algal spores

    SciTech Connect

    Hooten, R.; Carr, R.S.

    1995-12-31

    An acute pore water toxicity test protocol using germination and growth of marine macroalgae as endpoints was developed to indicate the presence of toxic compounds in marine/estuarine and sediment porewater samples. Zoospores collected from Ulva fasciata and U. lactuca were used as test organisms. Preliminary results with sodium dodecyl sulfate (SDS, a reference toxicant) indicate that zoospores germination and growth of embryonic gametophytes are as sensitive as the sea urchin fertilization and embryological development toxicity tests. Algal germination and growth data for copper, mercury and other metals will be presented. The results of tests utilizing this algal assay with sediment pore water from contaminated sediments will be compared with more traditional sediment toxicity test methods.

  10. Liquid transportation fuels from algal oils

    NASA Astrophysics Data System (ADS)

    Chen, Daichuan

    Liquid transportation fuels from renewable sources are becoming more prominent and important in modem society. Processing of hydrocarbon oils from algae has not been studied in detail in the past, so components which have been proposed for incorporation in algal oils via genetic engineering, such as cuparene, farnesene, phytol and squalene, have been subjected to processing via catalytic cracking in a pulse reactor at different temperatures. The cracking results showed that liquid products contained numerous high octane molecules which make it feasible for use in automobiles. Additionally, canola oil, chosen as an algal oil model compound, was studied as a feed for catalytic cracking in a fixed-bed reactor at atmospheric pressure over different types of zeolites. The results showed that MFI catalysts gave the highest yield of gasoline range products and lowest coke formation. Gallium loaded MFI zeolites increased the total aromatics yield for the canola oil cracking relative to the acid form of the zeolite. Finally, algal oils were cracked on several selected zeolites, and the results showed the same trend as canola oil cracking. MFI gave the highest gasoline yield (43.8 wt%) and lowest coke (4.7 wt%). The total aromatics yield from algae oil cracking is improved 7.8 wt% when MFI is loaded with gallium.

  11. Spray bottle apparatus with force multiply pistons

    DOEpatents

    Eschbach, Eugene A.

    1992-01-01

    The present invention comprises a spray bottle in which the pressure resulting from the gripping force applied by the user is amplified and this increased pressure used in generating a spray such as an aerosol or fluid stream. In its preferred embodiment, the invention includes a high pressure chamber and a corresponding piston which is operative for driving fluid out of this chamber at high pressure through a spray nozzle and a low pressure chamber and corresponding piston which is acted upon by the hydraulic pressure within the bottle resulting from the gripping force. The low pressure chamber and piston are of larger size than the high pressure chamber and piston. The pistons are rigidly connected so that the force created by the pressure acting on the piston in the low pressure chamber is transmitted to the piston in the high pressure chamber where it is applied over a more limited area thereby generating greater hydraulic pressure for use in forming the spray.

  12. Spray bottle apparatus with pressure multiplying pistons

    DOEpatents

    Moss, Owen R.; Gordon, Norman R.; DeFord, Henry S.

    1990-01-01

    The present invention comprises a spray bottle in which the pressure resulting from the gripping force applied by the user is amplified and this increased pressure used in generating a spray such as an aerosol or fluid stream. In its preferred embodiment, the invention includes a high pressure chamber and a corresponding piston which is operative for driving fluid out of this chamber at high pressure through a spray nozzle and a low pressure chamber and a corresponding piston which is acted upon the hydraulic pressure within the bottle resulting from the gripping force. The low pressure chamber and piston are of larger size than the high pressure chamber and piston. The pistons are rigidly connected so that the force created by the pressure acting on the piston in the low pressure chamber is transmitted to the piston in the high pressure chamber where it is applied over a more limited area thereby generating greater hydraulic pressure for use in forming the spray.

  13. Isolation of Leptospira from blood culture bottles.

    PubMed

    Girault, Dominique; Soupé-Gilbert, Marie-Estelle; Geroult, Sophie; Colot, Julien; Goarant, Cyrille

    2017-01-31

    With the increasing use of real-time PCR techniques, Leptospira isolation has mostly been abandoned for the diagnosis of human leptospirosis. However, there is a great value of collecting Leptospira isolates to better understand the epidemiology of this complex zoonosis and to provide the researchers with different isolates. In this study, we have successfully isolated different Leptospira strains from BacT/Alert aerobic blood culture bottles and suggest that this privileged biological material offers an opportunity to isolate leptospires.

  14. Bottle gourd (Lagenaria siceraria) juice poisoning

    PubMed Central

    Verma, Ankur; Jaiswal, Sanjay

    2015-01-01

    BACKGROUND: Bottle gourd (Lagenaria siceraria) is popularly known as lauki, ghia or dudhi in India. Its consumption is advocated by traditional medicine healers for controlling diabetes mellitus, hypertension, liver diseases, weight loss and other diseases. However, in last few years there have been reports of suspected toxicity due to consumption of its juice leading to severe vomiting and upper gastrointestinal bleeding. As emergency physicians we need to be aware of this very rare poisoning specially in India. METHODS: We present a case of a 52-year-old woman who presented with multiple episodes of hematemesis and shock to the emergency department (ED) after consuming bottle gourd juice. The patient was resuscitated and stabilized with fluids, proton pump inhibitors and antiemetics and shifted to the intensive care unit (ICU) under the care of a gastroenterology team for urgent endoscopy and further management. RESULTS: The patient received intravenous fluids, antibiotics, antiemetics, and antacids and underwent upper gastroenterologic endoscopy during the hospitalization. She was discharged in a stable condition 4 days later. CONCLUSIONS: As a member of the Cucurbitaceae family, bottle gourd contains toxic tetracyclic triterpenoid compounds called cucurbitacins which are responsible for the bitter taste and toxicity. There is no known antidote for this toxicity, and clinicians treat such patients symptomatically only. It is important to educate the public about the harmful effects of this potentially life-threatening toxicity. PMID:26693268

  15. Results of acoustic emission tests on Halon fire bottles

    SciTech Connect

    Beattie, A.G.; Shurtleff, W.W.

    1996-10-01

    An acoustic emission tester for aircraft Halon bottles has been developed. The necessary load is applied by heating the bottles. Acoustic emission is monitored during the heating by six sensors held in position by a special fixture. This fixture was designed to fit spheres with diameters between 5 and 16 inches. A prototype has been undergoing testing in two commercial Halon bottle repair and test facilities. Results to date indicate that about 97 percent of the bottles tested show no indications of any flaws. The other three percent have had indications of flaws in non-critical areas of the bottles. All bottles tested to date have passed the hydrostatic test required by the Department of Transportation (DOT).

  16. Study of polyacrylamide grafted starch based algal flocculation towards applications in algal biomass harvesting.

    PubMed

    Banerjee, Chiranjib; Gupta, Pratibha; Mishra, Sumit; Sen, Gautam; Shukla, Pratyoosh; Bandopadhyay, Rajib

    2012-11-01

    Microalgae may be the source of high amount of lipid and protein. It has the property for carbon dioxide sequestration, recycling and also can remove pollutants from wastewater. Using traditional methods, collection of algal biomass is either cost effective, time consuming or may be toxic due to use of chemical salts. The aim of this study is to harvest freshwater microalgae (Chlorella sp. CB4) biomass by using polymer. Polyacrylamide grafted starch (St-g-PAM) has been synthesized by microwave assisted method involving a synergism of microwave radiation and ceric ammonium nitrate (CAN) to initiate the grafting reaction. The synthesis was optimized in terms of CAN and monomer (acrylamide) concentration. The algal flocculation efficacy of all the grades of this graft copolymer was studied through standard 'Jar test' procedure. Effects of percentage grafting, pH and zeta potential on percentage recovery of algal biomass were thoroughly investigated.

  17. Algal taxonomy: a road to nowhere?

    PubMed

    De Clerck, Olivier; Guiry, Michael D; Leliaert, Frederik; Samyn, Yves; Verbruggen, Heroen

    2013-04-01

    The widespread view of taxonomy as an essentially retrogressive and outmoded science unable to cope with the current biodiversity crisis stimulated us to analyze the current status of cataloguing global algal diversity. Contrary to this largely pessimistic belief, species description rates of algae through time and trends in the number of active taxonomists, as revealed by the web resource AlgaeBase, show a much more positive picture. More species than ever before are being described by a large community of algal taxonomists. The lack of any decline in the rate at which new species and genera are described, however, is indicative of the large proportion of undiscovered diversity and bears heavily on any prediction of global algal species diversity and the time needed to catalogue it. The saturation of accumulation curves of higher taxa (family, order, and classes) on the other hand suggest that at these taxonomic levels most diversity has been discovered. This reasonably positive picture does not imply that algal taxonomy does not face serious challenges in the near future. The observed levels of cryptic diversity in algae, combined with the shift in methods used to characterize them, have resulted in a rampant uncertainty about the status of many older species. As a consequence, there is a tendency in phycology to move gradually away from traditional names to a more informal system whereby clade-, specimen- or strain-based identifiers are used to communicate biological information. Whether these informal names for species-level clades represent a temporary situation stimulated by the lag between species discovery and formal description, or an incipient alternative or parallel taxonomy, will be largely determined by how well we manage to integrate historical collections into modern taxonomic research. Additionally, there is a pressing need for a consensus about the organizational framework to manage the information about algal species names. An eventual strategy

  18. Powder Production From Waste Polyethylene Terephthalate (PET) Water Bottles

    DTIC Science & Technology

    2014-06-01

    Powder Production From Waste Polyethylene Terephthalate (PET) Water Bottles by Anit Giri, Frank Kellogg, Kyu Cho, and Marc Pepi ARL-MR...871 June 2014 Powder Production From Waste Polyethylene Terephthalate (PET) Water Bottles Anit Giri and Frank Kellogg Bowhead Science and...Polyethylene Terephthalate (PET) Water Bottles 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Anit Giri, * Frank

  19. 21 CFR 880.6085 - Hot/cold water bottle.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Hot/cold water bottle. 880.6085 Section 880.6085... Devices § 880.6085 Hot/cold water bottle. (a) Identification. A hot/cold water bottle is a device intended for medical purposes that is in the form of a container intended to be filled with hot or cold...

  20. 21 CFR 880.6085 - Hot/cold water bottle.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Hot/cold water bottle. 880.6085 Section 880.6085... Devices § 880.6085 Hot/cold water bottle. (a) Identification. A hot/cold water bottle is a device intended for medical purposes that is in the form of a container intended to be filled with hot or cold...

  1. 21 CFR 880.6085 - Hot/cold water bottle.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Hot/cold water bottle. 880.6085 Section 880.6085... Devices § 880.6085 Hot/cold water bottle. (a) Identification. A hot/cold water bottle is a device intended for medical purposes that is in the form of a container intended to be filled with hot or cold...

  2. 21 CFR 880.6085 - Hot/cold water bottle.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Hot/cold water bottle. 880.6085 Section 880.6085... Devices § 880.6085 Hot/cold water bottle. (a) Identification. A hot/cold water bottle is a device intended for medical purposes that is in the form of a container intended to be filled with hot or cold...

  3. Effects of algal turfs and sediment on coral settlement.

    PubMed

    Birrell, Chico L; McCook, Laurence J; Willis, Bette L

    2005-01-01

    Successful settlement and recruitment of corals is critical to the resilience of coral reefs. Given that many degraded reefs are dominated by benthic algae, recovery of coral populations after bleaching and other disturbances requires successful settlement amidst benthic algae. Algal turfs often accumulate sediments, sediments are known to inhibit coral settlement, and reefs with high inputs of terrestrial sediments are often dominated by turfs. We investigated the impacts of two algal turf assemblages, and of sediment deposits, on settlement of the coral Acropora millepora (Ehrenberg). Adding sediment reduced coral settlement, but the effects of different algal turfs varied. In one case, algal turfs inhibited coral settlement, whereas the other turf only inhibited settlement when combined with sediments. These results provide the first direct, experimental evidence of effects of filamentous algal turfs on coral settlement, the variability in those effects, and the potential combined effects of algal turfs and trapped sediments.

  4. Mechanism and challenges in commercialisation of algal biofuels.

    PubMed

    Singh, Anoop; Nigam, Poonam Singh; Murphy, Jerry D

    2011-01-01

    Biofuels made from algal biomass are being considered as the most suitable alternative energy in current global and economical scenario. Microalgae are known to produce and accumulate lipids within their cell mass which is similar to those found in many vegetable oils. The efficient lipid producer algae cell mass has been reported to contain more than 30% of their cell weight as lipids. According to US DOE microalgae have the potential to produce 100 times more oil per acre land than any terrestrial plants. This article reviews up to date literature on the composition of algae, mechanism of oil droplets, triacylglycerol (TAG) production in algal biomass, research and development made in the cultivation of algal biomass, harvesting strategies, and recovery of lipids from algal mass. The economical challenges in the production of biofuels from algal biomass have been discussed in view of the future prospects in the commercialisation of algal fuels.

  5. Wastewater treatment high rate algal ponds for biofuel production.

    PubMed

    Park, J B K; Craggs, R J; Shilton, A N

    2011-01-01

    While research and development of algal biofuels are currently receiving much interest and funding, they are still not commercially viable at today's fossil fuel prices. However, a niche opportunity may exist where algae are grown as a by-product of high rate algal ponds (HRAPs) operated for wastewater treatment. In addition to significantly better economics, algal biofuel production from wastewater treatment HRAPs has a much smaller environmental footprint compared to commercial algal production HRAPs which consume freshwater and fertilisers. In this paper the critical parameters that limit algal cultivation, production and harvest are reviewed and practical options that may enhance the net harvestable algal production from wastewater treatment HRAPs including CO(2) addition, species control, control of grazers and parasites and bioflocculation are discussed.

  6. Strong interactions between stoichiometric constraints and algal defenses: evidence from population dynamics of Daphnia and algae in phosphorus-limited microcosms.

    PubMed

    DeMott, William R; Van Donk, Ellen

    2013-01-01

    The dynamic interactions among nutrients, algae and grazers were tested in a 2 × 3 factorial microcosm experiment that manipulated grazers (Daphnia present or absent) and algal composition (single species cultures and mixtures of an undefended and a digestion-resistant green alga). The experiment was run for 25 days in 10-L carboys under mesotrophic conditions that quickly led to strong phosphorus limitation of algal growth (TP is approximately equal to 0.5 μM, N:P 40:1). Four-day Daphnia juvenile growth assays tested for Daphnia P-limitation and nutrient-dependent or grazer-induced algal defenses. The maximal algal growth rate of undefended Ankistrodesmus (mean ± SE for three replicate microcosms; 0.92 ± 0.02 day(-1)) was higher than for defended Oocystis (0.62 ± 0.03 day(-1)), but by day 6, algal growth was strongly P-limited in all six treatments (molar C:P ratio >900). The P-deficient algae were poor quality resources in all three algal treatments. However, Daphnia population growth, reproduction, and survival were much lower in the digestion-resistant treatment even though growth assays provided evidence for Daphnia P-limitation in only the undefended and mixed treatments. Growth assays provided little or no support for simple threshold element ratio (TER) models that fail to consider algae defenses that result in viable gut passage. Our results show that strong P-limitation of algal growth enhances the defenses of a digestion-resistant alga, favoring high abundance of well-defended algae and energy limitation of zooplankton growth.

  7. Oxygen contribution to wine aroma evolution during bottle aging.

    PubMed

    Ugliano, Maurizio

    2013-07-03

    Wine aroma undergoes major changes during bottle aging, which are deeply influenced by the degree of oxygen exposure in the bottle. This review discusses the involvement of oxygen in the main chemical transformations occurring in wine aroma composition during bottle aging, with particular emphasis on the formation of oxidative aroma compounds and formation/degradation of sulfur-containing volatile compounds. The implications for wine sensory properties are discussed, as well as some practical aspects of oxygen management during bottle aging, including the role of closure oxygen permeability.

  8. 77 FR 25721 - Small Entity Compliance Guide: Bottled Water: Quality Standard: Establishing an Allowable Level...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-01

    ... HUMAN SERVICES Food and Drug Administration Small Entity Compliance Guide: Bottled Water: Quality... availability of a guidance for industry entitled ``Bottled Water: Quality Standard: Establishing an Allowable... its bottled water standard of quality regulations by establishing an allowable level for...

  9. The Impact of Harmful Algal Blooms on USACE Operations

    DTIC Science & Technology

    2009-01-01

    algae multiply rapidly and accumulate in large numbers, creating an event referred to as an algal bloom. Algal blooms have occurred throughout... algae for their color (Woods Hole Oceanographic Institute 2008; Vézie et al. 1998, 2002). Algal blooms can prove harmful through reductions in...when algae species produce toxins such as microcystin, saxitoxin, brevetoxin, ciguatoxin, or domoic acid (Van Dolah 2000). There is still much to be

  10. Identification of Putative Steroid Receptor Antagonists in Bottled Water: Combining Bioassays and High-Resolution Mass Spectrometry

    PubMed Central

    Wagner, Martin; Schlüsener, Michael P.; Ternes, Thomas A.; Oehlmann, Jörg

    2013-01-01

    Endocrine disrupting chemicals (EDCs) are man-made compounds interfering with hormone signaling and thereby adversely affecting human health. Recent reports provide evidence for the presence of EDCs in commercially available bottled water, including steroid receptor agonists and antagonists. However, since these findings are based on biological data the causative chemicals remain unidentified and, therefore, inaccessible for toxicological evaluation. Thus, the aim of this study is to assess the antiestrogenic and antiandrogenic activity of bottled water and to identify the causative steroid receptor antagonists. We evaluated the antiestrogenic and antiandrogenic activity of 18 bottled water products in reporter gene assays for human estrogen receptor alpha and androgen receptor. Using nontarget high-resolution mass spectrometry (LTQ-Orbitrap Velos), we acquired corresponding analytical data. We combined the biological and chemical information to determine the exact mass of the tentative steroid receptor antagonist. Further MSn experiments elucidated the molecule’s structure and enabled its identification. We detected significant antiestrogenicity in 13 of 18 products. 16 samples were antiandrogenic inhibiting the androgen receptor by up to 90%. Nontarget chemical analysis revealed that out of 24520 candidates present in bottled water one was consistently correlated with the antagonistic activity. By combining experimental and in silico MSn data we identified this compound as di(2-ethylhexyl) fumarate (DEHF). We confirmed the identity and biological activity of DEHF and additional isomers of dioctyl fumarate and maleate using authentic standards. Since DEHF is antiestrogenic but not antiandrogenic we conclude that additional, yet unidentified EDCs must contribute to the antagonistic effect of bottled water. Applying a novel approach to combine biological and chemical analysis this is the first study to identify so far unknown EDCs in bottled water. Notably

  11. Algal biodiesel economy and competition among bio-fuels.

    PubMed

    Lee, D H

    2011-01-01

    This investigation examines the possible results of policy support in developed and developing economies for developing algal biodiesel through to 2040. This investigation adopts the Taiwan General Equilibrium Model-Energy for Bio-fuels (TAIGEM-EB) to predict competition among the development of algal biodiesel, bioethanol and conventional crop-based biodiesel. Analytical results show that algal biodiesel will not be the major energy source in 2040 without strong support in developed economies. In contrast, bioethanol enjoys a development advantage relative to both forms of biodiesel. Finally, algal biodiesel will almost completely replace conventional biodiesel. CO(2) reduction benefits the development of the bio-fuels industry.

  12. Conversion of Small Algal Oil Sample to JP-8

    DTIC Science & Technology

    2012-01-01

    9 Table 4. Wei ht Percent of n-Paraffins for Biofuels and JP-8 Fuel 7051 n-Decane ·n- ndecane n-Dodecane n-Tridecane W911NF -10-C-0021 Algal ...REPORT Conversion of Small Algal Oil Sample to JP-8 14. ABSTRACT 16. SECURITY CLASSIFICATION OF: A small sample of Algal oil was received by UOP for...P.O. Box 12211 Research Triangle Park, NC 27709-2211 15. SUBJECT TERMS Algal Oil, JP-8, SPK, MIL-DTL-83133G F. S. Lupton UOP LLC 25 East

  13. Assessing the potential of polyculture to accelerate algal biofuel production

    SciTech Connect

    Newby, Deborah T.; Mathews, Teresa J.; Pate, Ron C.; Huesemann, Michael H.; Lane, Todd W.; Wahlen, Bradley D.; Mandal, Shovon; Engler, Robert K.; Feris, Kevin P.; Shurin, Jon B.

    2016-10-24

    To date, the algal biofuel industry has focused on the cultivation of monocultures of highly productive algal strains, but scaling up production remains challenging. However, algal monocultures are difficult to maintain because they are easily contaminated by wild algal strains, grazers, and pathogens. In contrast, theory suggests that polycultures (multispecies assemblages) can promote both ecosystem stability and productivity. A greater understanding of species interactions and how communities change with time will need to be developed before polycultures can be successfully applied to large-scale algal production efforts. Here in this paper we review the agricultural and ecological literature to explore opportunities for increased annual biomass production through the use of algal polycultures. We discuss case studies where algal polycultures have been successfully maintained for industries other than the biofuel industry, as well as the few studies that have compared biomass production of algal polycultures to that of monocultures. Assemblages that include species with complementary traits are of particular promise. These assemblages have the potential not only to increase crop productivity and stability, but they may also be capable of utilizing natural resources (e.g. light, nutrients, water) more efficiently via tighter niche packing. Therefore, algal polycultures show promise for enhancing biomass productivity, enabling sustainable production and reducing overall production costs.

  14. Assessing the potential of polyculture to accelerate algal biofuel production

    DOE PAGES

    Newby, Deborah T.; Mathews, Teresa J.; Pate, Ron C.; ...

    2016-10-24

    To date, the algal biofuel industry has focused on the cultivation of monocultures of highly productive algal strains, but scaling up production remains challenging. However, algal monocultures are difficult to maintain because they are easily contaminated by wild algal strains, grazers, and pathogens. In contrast, theory suggests that polycultures (multispecies assemblages) can promote both ecosystem stability and productivity. A greater understanding of species interactions and how communities change with time will need to be developed before polycultures can be successfully applied to large-scale algal production efforts. Here in this paper we review the agricultural and ecological literature to explore opportunitiesmore » for increased annual biomass production through the use of algal polycultures. We discuss case studies where algal polycultures have been successfully maintained for industries other than the biofuel industry, as well as the few studies that have compared biomass production of algal polycultures to that of monocultures. Assemblages that include species with complementary traits are of particular promise. These assemblages have the potential not only to increase crop productivity and stability, but they may also be capable of utilizing natural resources (e.g. light, nutrients, water) more efficiently via tighter niche packing. Therefore, algal polycultures show promise for enhancing biomass productivity, enabling sustainable production and reducing overall production costs.« less

  15. Topoisomerase Assays

    PubMed Central

    Nitiss, John L.; Soans, Eroica; Rogojina, Anna; Seth, Aman; Mishina, Margarita

    2012-01-01

    Topoisomerases are nuclear enzymes that play essential roles in DNA replication, transcription, chromosome segregation, and recombination. All cells have two major forms of topoisomerases: type I, which makes single-stranded cuts in DNA, and type II enzymes, which cut and pass double-stranded DNA. DNA topoisomerases are important targets of approved and experimental anti-cancer agents. The protocols described in this unit are of assays used to assess new chemical entities for their ability to inhibit both forms of DNA topoisomerase. Included are an in vitro assay for topoisomerase I activity based on relaxation of supercoiled DNA and an assay for topoisomerase II based on the decatenation of double-stranded DNA. The preparation of mammalian cell extracts for assaying topoisomerase activity is described, along with a protocol for an ICE assay for examining topoisomerase covalent complexes in vivo and an assay for measuring DNA cleavage in vitro. PMID:22684721

  16. Blood Culture Bottle and Standard Culture Bottle Methods for Detection of Bacterial Pathogens in Parapneumonic Pleural Effusion

    PubMed Central

    Charoentunyarak, Surapan; Kananuraks, Sarassawan; Chindaprasirt, Jarin; Limpawattana, Panita; Sawanyawisuth, Kittisak

    2015-01-01

    Background: Bacterial parapneumonic pleural effusions (PPEs) have high morbidity. The accurate identification of pathogens is vital for initiating the appropriate treatment. A previous study suggested that the use of blood culture bottles might improve the bacterial yield in PPEs. Objectives: The aim of this study was to compare the culture positivity rate by the blood culture bottles and the standard culture bottles in bacterial PPEs. Patients and Methods: Patients diagnosed with PPEs at the Khon Kaen Hospital, Khon Kaen, Thailand, which is an endemic area of melioidosis, were enrolled consecutively and prospectively. The study period was from June first, 2012 to December 31st, 2013. The inclusion criteria were adult patients aged > 18 years, with exudative, neutrophilic parapneumonic effusion. Of the pleural fluid samples, 5 mL from all the eligible patients were collected in both blood culture bottles and the standard culture bottles. Patient baseline characteristics, laboratory results, and culture results were collected and analyzed. Results: During the study period, 129 patients met the study criteria. The bacteria-positive rate of pleural fluid culture using the standard culture bottle was 14.0%, whereas the positive rate using blood culture bottles was 24.0% (P < 0.001). Conclusions: The blood culture bottle method is more effective than the standard culture bottle method for the detection of bacterial pathogens in PPE. PMID:26587217

  17. Algal Lipids as Quantitative Paleosalinity Proxies

    NASA Astrophysics Data System (ADS)

    Maloney, A.; Shinneman, A.; Hemeon, K.; Sachs, J. P.

    2012-12-01

    The tropics play an important role in driving climate. However it is difficult to uncover past changes in tropical precipitation due to a lack of tree ring records and low accumulation rates of marine sediments. Hydrogen isotope ratios of algal lipids preserved in lacustrine and marine sediments have been used to qualitatively reconstruct tropical paleohydrology. Changes in the hydrologic balance are reflected in salinity and in lake water D/H ratios, which are closely tracked by lipid D/H ratios of algal biomarkers. While useful for determining past periods of "wetter" or "drier" conditions, variability in isotope fractionation in algal lipids during lipid biosynthesis can be exploited to more quantitatively determine how much wetter or drier conditions were in the past. The estuarine diatom, Thalassiosira pseudonnana, was grown in continuous cultures under controlled light, temperature, nutrient, and growth rate conditions to assess the influence of salinity (9-40 PSU) on D/H fractionation between lipids and source water. Three fatty acids, 24-methylcholesta-5,24(28)-dien-3B-ol, and phytol show decreasing fractionation between lipid and source water as salinity increases with 0.8-1.3‰ change in fractionation per salinity unit. These results compliment field-based empirical observations of dinosterol in Chesapeake Bay suspended particles that change 0.99‰ per salinity unit and lipid biomarkers from hyper-saline ponds on Christmas Island that change 0.7-1.1‰ per salinity unit. Biological pathways responsible for the inverse relationship between fractionation and salinity will be discussed.

  18. Addressing the challenges for sustainable production of algal biofuels: I. Algal strains and nutrient supply.

    PubMed

    Abdelaziz, Ahmed E M; Leite, Gustavo B; Hallenbeck, Patrick C

    2013-01-01

    Microalgae hold promise for the production of sustainable replacement of fossil fuels due to their high growth rates, ability to grow on non-arable land and their high content, under the proper conditions, of high energy compounds that can be relatively easily chemically converted to fuels using existing technology. However, projected large-scale algal production raises a number of sustainability concerns concerning land use, net energy return, water use and nutrient supply. The state-of-the-art of algal production of biofuels is presented with emphasis on some possible avenues to provide answers to the sustainability questions that have been raised. Here, issues concerning algal strains and supply of nutrients for large-scale production are discussed. Since sustainability concerns necessitate the use of wastewaters for supply of bulk nutrients, emphasis is placed on the composition and suitability of different wastewater streams. At the same time, algal cultivation has proven useful in waste treatment processes, and thus this aspect is also treated in some detail.

  19. Algal Attributes: An Autecological Classification of Algal Taxa Collected by the National Water-Quality Assessment Program

    USGS Publications Warehouse

    Porter, Stephen D.

    2008-01-01

    Algae are excellent indicators of water-quality conditions, notably nutrient and organic enrichment, and also are indicators of major ion, dissolved oxygen, and pH concentrations and stream microhabitat conditions. The autecology, or physiological optima and tolerance, of algal species for various water-quality contaminants and conditions is relatively well understood for certain groups of freshwater algae, notably diatoms. However, applications of autecological information for water-quality assessments have been limited because of challenges associated with compiling autecological literature from disparate sources, tracking name changes for a large number of algal species, and creating an autecological data base from which algal-indicator metrics can be calculated. A comprehensive summary of algal autecological attributes for North American streams and rivers does not exist. This report describes a large, digital data file containing 28,182 records for 5,939 algal taxa, generally species or variety, collected by the U.S. Geological Survey?s National Water-Quality Assessment (NAWQA) Program. The data file includes 37 algal attributes classified by over 100 algal-indicator codes or metrics that can be calculated easily with readily available software. Algal attributes include qualitative classifications based on European and North American autecological literature, and semi-quantitative, weighted-average regression approaches for estimating optima using regional and national NAWQA data. Applications of algal metrics in water-quality assessments are discussed and national quartile distributions of metric scores are shown for selected indicator metrics.

  20. Centriole asymmetry determines algal cell geometry

    PubMed Central

    Marshall, Wallace F.

    2012-01-01

    The mechanisms that determine the shape and organization of cells remain largely unknown. Green algae such as Chlamydomonas provide excellent model systems for studying cell geometry due to their highly reproducible cell organization. Structural and genetic studies suggest that asymmetry of the centriole (basal body) plays a critical determining role in organizing the internal organization of algal cells, through the attachment of microtubule rootlets and other large fiber systems to specific sets of microtubule triplets on the centriole. Thus to understand cell organization, it will be critical to understand how the different triplets of the centriole come to have distinct molecular identities. PMID:23026116

  1. Comparison of detection threshold values determined using glass sniff bottles and plastic squeeze bottles.

    PubMed

    Wudarski, Thomas J; Doty, Richard L

    2004-02-01

    Olfactory threshold measures are influenced by such factors as odorant species, diluent type, psychophysical paradigm, and stimulus-presentation procedure. In this study, we compared phenyl ethyl alcohol odor-detection thresholds obtained using 120-ml glass sniff bottles to those obtained using 120-ml plastic squeeze bottles. Although these presentation media are commonly employed in published studies, there has never been a formal comparison of values obtained using them. 10 male and 10 female subjects were tested on two threshold test sessions, one for each type of bottle. Order of sessions was systematically counterbalanced and completed on the same day for a given subject, with a minimum of 30 min. elapsing between sessions. A seven-reversal, single-staircase threshold procedure was employed. Although the threshold values were similar for the two procedures, slightly lower thresholds were obtained using the glass sniff bottles [respective M (SEM) log vol/vol values = -6.61 (.20) and -6.13 (.24)]. These data suggest that, while threshold values using these two presentation procedures can be roughly compared across studies, accurate comparisons may require a slight mathematical adjustment.

  2. Accelerating Commercialization of Algal Biofuels Through Partnerships (Brochure)

    SciTech Connect

    Not Available

    2011-10-01

    This brochure describes National Renewable Energy Laboratory's (NREL's) algal biofuels research capabilities and partnership opportunities. NREL is accelerating algal biofuels commercialization through: (1) Advances in applied biology; (2) Algal strain development; (3) Development of fuel conversion pathways; (4) Techno-economic analysis; and (5) Development of high-throughput lipid analysis methodologies. NREL scientists and engineers are addressing challenges across the algal biofuels value chain, including algal biology, cultivation, harvesting and extraction, and fuel conversion. Through partnerships, NREL can share knowledge and capabilities in the following areas: (1) Algal Biology - A fundamental understanding of algal biology is key to developing cost-effective algal biofuels processes. NREL scientists are experts in the isolation and characterization of microalgal species. They are identifying genes and pathways involved in biofuel production. In addition, they have developed a high-throughput, non-destructive technique for assessing lipid production in microalgae. (2) Cultivation - NREL researchers study algal growth capabilities and perform compositional analysis of algal biomass. Laboratory-scale photobioreactors and 1-m2 open raceway ponds in an on-site greenhouse allow for year-round cultivation of algae under a variety of conditions. A bioenergy-focused algal strain collection is being established at NREL, and our laboratory houses a cryopreservation system for long-term maintenance of algal cultures and preservation of intellectual property. (3) Harvesting and Extraction - NREL is investigating cost-effective harvesting and extraction methods suitable for a variety of species and conditions. Areas of expertise include cell wall analysis and deconstruction and identification and utilization of co-products. (4) Fuel Conversion - NREL's excellent capabilities and facilities for biochemical and thermochemical conversion of biomass to biofuels are being

  3. High-throughput analysis of algal crude oils using high resolution mass spectrometry.

    PubMed

    Lee, Young Jin; Leverence, Rachael C; Smith, Erica A; Valenstein, Justin S; Kandel, Kapil; Trewyn, Brian G

    2013-03-01

    Lipid analysis often needs to be specifically optimized for each class of compounds due to its wide variety of chemical and physical properties. It becomes a serious bottleneck in the development of algae-based next generation biofuels when high-throughput analysis becomes essential for the optimization of various process conditions. We propose a high-resolution mass spectrometry-based high-throughput assay as a 'quick-and-dirty' protocol to monitor various lipid classes in algal crude oils. Atmospheric pressure chemical ionization was determined to be most effective for this purpose to cover a wide range of lipid classes. With an autosampler-LC pump set-up, we could analyze algal crude samples every one and half minutes, monitoring several lipid species such as TAG, DAG, squalene, sterols, and chlorophyll a. High-mass resolution and high-mass accuracy of the orbitrap mass analyzer provides confidence in the identification of these lipid compounds. MS/MS and MS3 analysis could be performed in parallel for further structural information, as demonstrated for TAG and DAG. This high-throughput method was successfully demonstrated for semi-quantitative analysis of algal oils after treatment with various nanoparticles.

  4. Recreational Exposure to Low Concentrations of Microcystins During an Algal Bloom in a Small Lake

    PubMed Central

    Backer, Lorraine C.; Carmichael, Wayne; Kirkpatrick, Barbara; Williams, Christopher; Irvin, Mitch; Zhou, Yue; Johnson, Trisha B.; Nierenberg, Kate; Hill, Vincent R.; Kieszak, Stephanie M.; Cheng, Yung-Sung

    2008-01-01

    We measured microcystins in blood from people at risk for swallowing water or inhaling spray while swimming, water skiing, jet skiing, or boating during an algal bloom. We monitored water samples from a small lake as a Microcystis aeruginosa bloom developed. We recruited 97 people planning recreational activities in that lake and seven others who volunteered to recreate in a nearby bloom-free lake. We conducted our field study within a week of finding a 10-μg/L microcystin concentration. We analyzed water, air, and human blood samples for water quality, potential human pathogens, algal taxonomy, and microcystin concentrations. We interviewed study participants for demographic and current health symptom information. Water samples were assayed for potential respiratory viruses (adenoviruses and enteroviruses), but none were detected. We did find low concentrations of Escherichia coli, indicating fecal contamination. We found low levels of microcystins (2 μg/L to 5 μg/L) in the water and (<0.1 ng/m3) in the aerosol samples. Blood levels of microcystins for all participants were below the limit of detection (0.147μg/L). Given this low exposure level, study participants reported no symptom increases following recreational exposure to microcystins. This is the first study to report that water-based recreational activities can expose people to very low concentrations of aerosol-borne microcystins; we recently conducted another field study to assess exposures to higher concentrations of these algal toxins. PMID:18728733

  5. Portable NIR bottled liquid explosive detector

    NASA Astrophysics Data System (ADS)

    Itozaki, Hideo; Ono, Masaki; Ito, Shiori; Uekawa, Keisuke; Miyato, Yuji; Sato-Akaba, Hideo

    2016-05-01

    A near infrared bottled liquid scanner has been developed for security check at airports for anti-terrorism. A compact handheld liquid scanner has been developed using an LED as a light source, instead of a halogen lamp. An LED has much smaller size, longer life time and lower power consumption than those of the lamp. However, it has narrower wave band. Here, we tried to use LEDs to scan liquids and showed the possibility that LEDs can be used as a light source of liquid detector.

  6. 27 CFR 26.316 - Bottles not constituting approved containers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottles not constituting approved containers. 26.316 Section 26.316 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX... appropriate TTB officer that such bottle is not and approved container for distilled spirits for...

  7. 27 CFR 19.394 - Bottled-in-bond spirits.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottled-in-bond spirits. 19.394 Section 19.394 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... which are labeled as bottled-in-bond for domestic consumption shall meet the requirements in 27 CFR...

  8. 27 CFR 27.206 - Bottles not constituting approved containers.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottles not constituting approved containers. 27.206 Section 27.206 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX... officer that such bottle is not an approved container for distilled spirits for consumption in the...

  9. 21 CFR 880.6085 - Hot/cold water bottle.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Hot/cold water bottle. 880.6085 Section 880.6085 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES GENERAL HOSPITAL AND PERSONAL USE DEVICES General Hospital and Personal Use Miscellaneous Devices § 880.6085 Hot/cold water bottle....

  10. "Bottled or Tap?" A Controversy for Science, Economics, and Society

    ERIC Educational Resources Information Center

    Lapham, Steven S.

    2009-01-01

    Every year, Americans spend billions of dollars on bottled water. They purchase a bottle from the vending machine or buy a case at the grocery, no longer considering the water that's freely available from their taps. As consumers and as citizens, however, Americans should pause to study the personal and public consequences of this choice. In this…

  11. Filling or draining a water bottle with two holes

    NASA Astrophysics Data System (ADS)

    Cross, Rod

    2016-07-01

    Three simple experiments are described using a small water bottle with two holes in the side of the bottle. The main challenge is to predict and then explain the observations, but the arrangements can also be used for quantitative measurements concerning hydrostatic pressure, Bernoulli’s equation, surface tension and bubble formation.

  12. 27 CFR 25.158 - Tax computation for bottled beer.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... bottled beer. 25.158 Section 25.158 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL BEER Tax on Beer Determination of Tax § 25.158 Tax computation for bottled beer. Barrel equivalents for various case sizes are as follows: (a) For U.S....

  13. 27 CFR 25.158 - Tax computation for bottled beer.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... bottled beer. 25.158 Section 25.158 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Tax on Beer Determination of Tax § 25.158 Tax computation for bottled beer. Barrel equivalents for various case sizes are as follows: (a) For U.S....

  14. 27 CFR 25.158 - Tax computation for bottled beer.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... bottled beer. 25.158 Section 25.158 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Tax on Beer Determination of Tax § 25.158 Tax computation for bottled beer. Barrel equivalents for various case sizes are as follows: (a) For U.S....

  15. 27 CFR 25.158 - Tax computation for bottled beer.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... bottled beer. 25.158 Section 25.158 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL BEER Tax on Beer Determination of Tax § 25.158 Tax computation for bottled beer. Barrel equivalents for various case sizes are as follows: (a) For U.S....

  16. What about the Bottle? Answers to Common Questions.

    ERIC Educational Resources Information Center

    Laird, Valerie

    2001-01-01

    Acknowledges the large amount of confusing information about bottle feeding in areas including nutrition, sanitation, dental health, psychology, and child development. Answers specific questions pertaining to choice of formula and formula preparation, supporting breastfeeding, bottle choice, solid food introduction, feeding position, spitting up,…

  17. Heat Transfer in Glass, Aluminum, and Plastic Beverage Bottles

    ERIC Educational Resources Information Center

    Clark, William M.; Shevlin, Ryan C.; Soffen, Tanya S.

    2010-01-01

    This paper addresses a controversy regarding the effect of bottle material on the thermal performance of beverage bottles. Experiments and calculations that verify or refute advertising claims and represent an interesting way to teach heat transfer fundamentals are described. Heat transfer coefficients and the resistance to heat transfer offered…

  18. Engineering Study of 500 ML Sample Bottle Transportation Methods

    SciTech Connect

    BOGER, R.M.

    1999-08-25

    This engineering study reviews and evaluates all available methods for transportation of 500-mL grab sample bottles, reviews and evaluates transportation requirements and schedules and analyzes and recommends the most cost-effective method for transporting 500-mL grab sample bottles.

  19. 27 CFR 25.158 - Tax computation for bottled beer.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... bottled beer. 25.158 Section 25.158 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Tax on Beer Determination of Tax § 25.158 Tax computation for bottled beer. Barrel equivalents for various case sizes are as follows: (a) For U.S....

  20. Improvements to the Whoosh Bottle Rocket Car Demonstration

    ERIC Educational Resources Information Center

    Campbell, Dean J.; Staiger, Felicia A.; Jujjavarapu, Chaitanya N.

    2015-01-01

    The whoosh bottle rocket car has been redesigned to be more reusable and more robust, making it even easier to use as a demonstration. Enhancements of this demonstration, including the use of heat sensitive ink and electronic temperature probes, enable users to find warmer and cooler regions on the surface of the whoosh bottle.

  1. Filling or Draining a Water Bottle with Two Holes

    ERIC Educational Resources Information Center

    Cross, Rod

    2016-01-01

    Three simple experiments are described using a small water bottle with two holes in the side of the bottle. The main challenge is to predict and then explain the observations, but the arrangements can also be used for quantitative measurements concerning hydrostatic pressure, Bernoulli's equation, surface tension and bubble formation.

  2. Mechanical algal disruption for efficient biodiesel extraction

    NASA Astrophysics Data System (ADS)

    Krehbiel, Joel David

    Biodiesel from algae provides several benefits over current biodiesel feedstocks, but the energy requirements of processing algae into a useable fuel are currently so high as to be prohibitive. One route to improving this is via disruption of the cells prior to lipid extraction, which can significantly increase energy recovery. Unfortunately, several obvious disruption techniques require more energy than can be gained. This dissertation examines the use of microbubbles to improve mechanical disruption of algal cells using experimental, theoretical, and computational methods. New laboratory experiments show that effective ultrasonic disruption of algae is achieved by adding microbubbles to an algal solution. The configuration studied flows the solution through a tube and insonifies a small section with a high-pressure ultrasound wave. Previous biomedical research has shown effective cell membrane damage on animal cells with similar methods, but the present research is the first to extend such study to algal cells. Results indicate that disruption increases with peak negative pressure between 1.90 and 3.07 MPa and with microbubble concentration up to 12.5 x 107 bubbles/ml. Energy estimates of this process suggest that it requires only one-fourth the currently most-efficient laboratory-scale disruption process. Estimates of the radius near each bubble that causes disruption (i.e. the disruption radius) suggest that it increases with peak negative pressure and is near 9--20 microm for all cases tested. It is anticipated that these procedures can be designed for better efficiency and efficacy, which will be facilitated by identifying the root mechanisms of the bubble-induced disruption. We therefore examine whether bubble expansion alone creates sufficient cell deformation for cell rupture. The spherically-symmetric Marmottant model for bubble dynamics allows estimation of the flow regime under experimental conditions. Bubble expansion is modeled as a point source of

  3. Luminescent Solar Concentrators in the Algal Industry

    NASA Astrophysics Data System (ADS)

    Hellier, Katie; Corrado, Carley; Carter, Sue; Detweiler, Angela; Bebout, Leslie

    2013-03-01

    Today's industry for renewable energy sources and highly efficient energy management systems is rapidly increasing. Development of increased efficiency Luminescent Solar Concentrators (LSCs) has brought about new applications for commercial interests, including greenhouses for agricultural crops. This project is taking first steps to explore the potential of LSCs to enhance production and reduce costs for algae and cyanobacteria used in biofuels and nutraceuticals. This pilot phase uses LSC filtered light for algal growth trials in greenhouses and laboratory experiments, creating specific wavelength combinations to determine effects of discrete solar light regimes on algal growth and the reduction of heating and water loss in the system. Enhancing the optimal spectra for specific algae will not only increase production, but has the potential to lessen contamination of large scale production due to competition from other algae and bacteria. Providing LSC filtered light will reduce evaporation and heating in regions with limited water supply, while the increased energy output from photovoltaic cells will reduce costs of heating and mixing cultures, thus creating a more efficient and cost effective production system.

  4. Potential of carbon nanotubes in algal biotechnology.

    PubMed

    Lambreva, Maya Dimova; Lavecchia, Teresa; Tyystjärvi, Esa; Antal, Taras Kornelievich; Orlanducci, Silvia; Margonelli, Andrea; Rea, Giuseppina

    2015-09-01

    A critical mass of knowledge is emerging on the interactions between plant cells and engineered nanomaterials, revealing the potential of plant nanobiotechnology to promote and support novel solutions for the development of a competitive bioeconomy. This knowledge can foster the adoption of new methodological strategies to empower the large-scale production of biomass from commercially important microalgae. The present review focuses on the potential of carbon nanotubes (CNTs) to enhance photosynthetic performance of microalgae by (i) widening the spectral region available for the energy conversion reactions and (ii) increasing the tolerance of microalgae towards unfavourable conditions occurring in mass production. To this end, current understanding on the mechanisms of uptake and localization of CNTs in plant cells is discussed. The available ecotoxicological data were used in an attempt to assess the feasibility of CNT-based applications in algal biotechnology, by critically correlating the experimental conditions with the observed adverse effects. Furthermore, main structural and physicochemical properties of single- and multi-walled CNTs and common approaches for the functionalization and characterization of CNTs in biological environment are presented. Here, we explore the potential that nanotechnology can offer to enhance functions of algae, paving the way for a more efficient use of photosynthetic algal systems in the sustainable production of energy, biomass and high-value compounds.

  5. Dynamic metabolic exchange governs a marine algal-bacterial interaction

    PubMed Central

    Segev, Einat; Wyche, Thomas P; Kim, Ki Hyun; Petersen, Jörn; Ellebrandt, Claire; Vlamakis, Hera; Barteneva, Natasha; Paulson, Joseph N; Chai, Liraz; Clardy, Jon; Kolter, Roberto

    2016-01-01

    Emiliania huxleyi is a model coccolithophore micro-alga that generates vast blooms in the ocean. Bacteria are not considered among the major factors influencing coccolithophore physiology. Here we show through a laboratory model system that the bacterium Phaeobacter inhibens, a well-studied member of the Roseobacter group, intimately interacts with E. huxleyi. While attached to the algal cell, bacteria initially promote algal growth but ultimately kill their algal host. Both algal growth enhancement and algal death are driven by the bacterially-produced phytohormone indole-3-acetic acid. Bacterial production of indole-3-acetic acid and attachment to algae are significantly increased by tryptophan, which is exuded from the algal cell. Algal death triggered by bacteria involves activation of pathways unique to oxidative stress response and programmed cell death. Our observations suggest that bacteria greatly influence the physiology and metabolism of E. huxleyi. Coccolithophore-bacteria interactions should be further studied in the environment to determine whether they impact micro-algal population dynamics on a global scale. DOI: http://dx.doi.org/10.7554/eLife.17473.001 PMID:27855786

  6. Method and system of culturing an algal mat

    DOEpatents

    Das, Keshav C; Cannon, Benjamin R; Bhatnagar, Ashish; Chinnasamy, Senthil

    2014-05-13

    A system and method for culturing algae are presented. The system and method utilize a fog of growth medium that is delivered to an algal mat generator along with a stream of CO.sub.2 to promote growth of algal cells contained in the generator.

  7. Safety evaluation of Algal Oil from Schizochytrium sp.

    PubMed

    Fedorova-Dahms, I; Marone, P A; Bailey-Hall, E; Ryan, A S

    2011-01-01

    The safety of Algal Oil from Schizochytrium sp. was evaluated by testing for gene mutations, clastogenicity and aneugenicity, and in a subchronic 90-day Sprague-Dawley rat dietary study. The results of all genotoxicity tests were negative. The 90-day study involved dietary exposure to 0.5, 1.5, and 5 wt.% of Algal Oil and two control diets: a standard low-fat basal diet and a basal diet supplemented with 5 wt.% menhaden oil (the fish oil control). There were no treatment-related effects of Algal Oil on clinical observations, body weight, food consumption, behavior, hematology, clinical chemistry, coagulation, or urinalysis parameters. Increased mean liver weights and alveolar histiocytosis were observed in both the fish oil control and the high-dose Algal Oil-treated animals and were not considered to be adverse. Algal Oil was bioavailable as demonstrated by the dose-related increase of DHA and EPA levels in tissues and plasma. The no observable adverse effect level (NOAEL) for Algal Oil under the conditions of this study was 5 wt.% in the diet, equivalent to an overall average Algal Oil intake of 3250 mg/kg bw/day for male and female rats. Based on the body surface area, the human equivalent dose is about 30 g Algal Oil/day for a 60 kg adult.

  8. What is causing the harmful algal blooms in Lake Erie?

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Harmful and nuisance algal blooms have been increasing in size and extent since about 2000. In recent years, the release of the algal toxin microcystin has become a growing concern and has resulted in the inability to use water from Lake Erie as a drinking water source to the 400,000 residents of T...

  9. Algal Lipid Extraction and Upgrading to Hydrocarbons Technology Pathway

    SciTech Connect

    Davis, R.; Biddy, M.; Jones, S.

    2013-03-01

    This technology pathway case investigates the cultivation of algal biomass followed by further lipid extraction and upgrading to hydrocarbon biofuels. Technical barriers and key research needs have been assessed in order for the algal lipid extraction and upgrading pathway to be competitive with petroleum-derived gasoline-, diesel-, and jet-range hydrocarbon blendstocks.

  10. EFFECTS OF MARINE ALGAL TOXINS ON THERMOREGULATION IN MICE.

    EPA Science Inventory

    Hypothermia is often seen in mice and rats exposed acutely to marine algal toxins, but the mechanism of action of these toxins on thermoregulation is not well understood. Our laboratory has assessed the thermoregulatory mechanisms of two marine algal toxins, maitotoxin and brevet...

  11. COMPARISON OF LARGE RIVER SAMPLING METHODS ON ALGAL METRICS

    EPA Science Inventory

    We compared the results of four methods used to assess the algal communities at 60 sites distributed among four rivers. Based on Principle Component Analysis of physical habitat data collected concomitantly with the algal data, sites were separated into those with a mean thalweg...

  12. A novel vision-based PET bottle recycling facility

    NASA Astrophysics Data System (ADS)

    He, Xiangyu; He, Zaixing; Zhang, Shuyou; Zhao, Xinyue

    2017-02-01

    Post-consumer PET bottle recycling is attracting increasing attention due to its value as an energy conservation and environmental protection measure. Sorting by color is a common method in bottle recycling; however, manual operations are unstable and time consuming. In this paper, we design a vision-based facility to perform high-speed bottle sorting. The proposed facility consists mainly of electric and mechanical hardware and image processing software. To solve the recognition problem of isolated and overlapped bottles, we propose a new shape descriptor and utilize the support vector data description classifier. We use color names to represent the colors in the real world in order to avoid problems introduced by colors that are similar. The facility is evaluated by the target error, outlier error and total error. The experimental results demonstrate that the facility we developed is capable of recycling various PET bottles.

  13. Ocular injuries from carbonated soft drink bottle explosions.

    PubMed

    Al Salem, M; Sheriff, S M

    1984-04-01

    Sixteen cases of ocular injuries serious enough to require admission to Ibn-Sina Hospital, Kuwait, Arabian Gulf, due to explosion of glass bottles of carbonated soft drinks are reported over a period of 14 months from the beginning of July 1981 to the end of August 1982. Prevalence was much greater in the summer months and among children. Explosions of bottles without prior agitation occurred in 11 cases (68.7%). High environmental temperature and defective bottles were the most important predisposing factors. Preventive measures we suggest are better standards for manufacturers, more careful inspection of returnable bottles to detect defective ones, a separate detailed warning label on all bottles, and health education especially of school children about this and other risks of serious injury to the eyes and other parts of the body.

  14. Serious eye injuries caused by bottles containing carbonated drinks

    PubMed Central

    Kuhn, F; Mester, V; Morris, R; Dalma, J

    2004-01-01

    Aim: To analyse serious eye injuries caused by bottles containing pressurised drinks. Methods: Retrospective review of the databases of US, Hungarian, and Mexican eye injury registries. Results: In the combined database (12 889 injuries), 90 cases (0.7%) were caused by bottle tops or glass splinters. The incidence varied widely: 0.3% (United States), 3.1% (Hungary), and 0.9% (Mexico), as did the agent. Champagne bottle corks were responsible in 20% (United States), 71% (Hungary; p<0.0001), and 0% (Mexico). Most eyes improved, but 26% remained legally blind. Conclusions: The presence of warning labels on champagne bottles appears to reduce cork related eye injuries, as does using plastic bottles and caps. PMID:14693777

  15. Potency of (doped) rare earth oxide particles and their constituent metals to inhibit algal growth and induce direct toxic effects.

    PubMed

    Joonas, Elise; Aruoja, Villem; Olli, Kalle; Syvertsen-Wiig, Guttorm; Vija, Heiki; Kahru, Anne

    2017-03-27

    Use of rare earth elements (REEs) has increased rapidly in recent decades due to technological advances. It has been accompanied by recurring rare earth element anomalies in water bodies. In this work we (i) studied the effects of eight novel doped and one non-doped rare earth oxide (REO) particles (aimed to be used in solid oxide fuel cells and gas separation membranes) on algae, (ii) quantified the individual adverse effects of the elements that constitute the (doped) REO particles and (iii) attempted to find a discernible pattern to relate REO particle physicochemical characteristics to algal growth inhibitory properties. Green algae Raphidocelis subcapitata (formerly Pseudokirchneriella subcapitata) were used as a test species in two different formats: a standard OECD201 algal growth inhibition assay and the algal viability assay (a 'spot test') that avoids nutrient removal effects. In the 24h 'spot' test that demonstrated direct toxicity, algae were not viable at REE concentrations above 1mgmetal/L. 72-hour algal growth inhibition EC50 values for four REE salts (Ce, Gd, La, Pr) were between 1.2 and 1.4mg/L, whereas the EC50 for REO particles ranged from 1 to 98mg/L. The growth inhibition of REEs was presumably the result of nutrient sequestration from the algal growth medium. The adverse effects of REO particles were at least in part due to the entrapment of algae within particle agglomerates. Adverse effects due to the dissolution of constituent elements from (doped) REO particles and the size or specific surface area of particles were excluded, except for La2NiO4. However, the structure of the particles and/or the varying effects of oxide composition might have played a role in the observed effects. As the production rates of these REO particles are negligible compared to other forms of REEs, there is presumably no acute risk for aquatic unicellular algae.

  16. Computer Simulations of Bottle Brushes: From Melts to Soft Networks

    SciTech Connect

    Cao, Zhen; Carrillo, Jan-Michael Y.; Sheiko, Sergei S.; Dobrynin, Andrey V.

    2015-07-13

    We use a combination of Molecular dynamics simulations and analytical calculations, and study dens bottle-brush systems in a melt and network State. Analysis of our simulation results shows that bottle-brush macromolecules in melt behave as ideal chains with effective Kuhn length bK. Simulations show that the bottle-brush-induced bending rigidity is due to an entropy decrease caused by redistribution of the side chains upon backbone bending. The Kuhn length of the bottle:brushes increases with increasing the side-chain degree of polymerization nsc as bK proportional to nsc0.46. Moreover, this model of bottle brush macromolecules is extended to describe mechanical properties of bottle brush networks in linear and nonlinear deformation regimes. In the linear deformation regime, the network shear modulus scales with the degree of polymerization of the side chains as G0 proportional to (nsc + 1)-1 as long as the ratio of the Kuhn length, bK, to the size of the fully extended bottle-brush backbone between cross-links, R-max, is smaller than unity, bK/Rmax << 1. Bottle-brush networks With bK/Rmax proportional to 1 demonstrate behavior similar to that of networks Of semiflexible chains with G0 proportional to nsc-0.5. Finally, in the nonlinear network deformation regime, the deformation-dependent shear modulus is a universal function of the first strain invariant I1 and bottle-brush backbone deformation ratio beta describing stretching ability of the bottle-brush backbone between cross-links.

  17. Uniform algal growth in photobioreactors using surface scatterers

    NASA Astrophysics Data System (ADS)

    Ahsan, Syed S.; Pereyra, Brandon; Erickson, David

    2014-03-01

    Cultures of algae, such as cyanobacteria, are a promising source of renewable energy. However, algal growth is highly dependent on light intensity and standard photobioreactors do a poor job of distributing light uniformly for algal utilization due to shading effects in dense algal cultures. Engineered scattering schemes are already employed in current slab-waveguide technologies, like edge-lit LEDs. Stacking such slab-waveguides that uniformly distribute light could potentially yield photobioreactors to overcome the shading effect and grow extremely high densities of algal cultures that would lower monetary and energetic costs. Here, we characterize and design a scattering scheme for specific application within photobioreactors which employs a gradient distribution of surface scatterers with uniform lateral scattering intensity. This uniform scattering scheme is shown to be superior for algal cultivation.

  18. The contribution of bacteria to algal growth by carbon cycling.

    PubMed

    Bai, Xue; Lant, Paul; Pratt, Steven

    2015-04-01

    Algal mass production in open systems is often limited by the availability of inorganic carbon substrate. In this paper, we evaluate how bacterial driven carbon cycling mitigates carbon limitation in open algal culture systems. The contribution of bacteria to carbon cycling was determined by quantifying algae growth with and without supplementation of bacteria. It was found that adding heterotrophic bacteria to an open algal culture dramatically enhanced algae productivity. Increases in algal productivity due to supplementation of bacteria of 4.8 and 3.4 times were observed in two batch tests operating at two different pH values over 7 days. A kinetic model is proposed which describes carbon limited algal growth, and how the limitation could be overcome by bacterial activity to re-mineralize photosynthetic end products.

  19. Squeeze bottle apparatus with force multiplying pistons

    DOEpatents

    Moss, Owen R.; Gordon, Norman R.; DeFord, Henry S.; Eschbach, Eugene A.

    1994-01-01

    The present invention comprises a spray bottle in which the pressure resulting from the gripping force applied by the user is amplified and this increased pressure used in generating a spray such as an aerosol or fluid stream. In its preferred embodiment, the invention includes a high pressure chamber and a corresponding piston which is operative for driving fluid out of this chamber at high pressure through a spray nozzle and a low pressure chamber, and a corresponding piston which is acted upon by the hydraulic pressure within the bottle resulting from the gripping force. The low pressure chamber and piston are of larger size than the high pressure chamber and piston. The pistons are rigidly connected so that the force created by the pressure acting on the piston in the low pressure chamber is transmitted to the piston in the high pressure chamber where it is applied over a more limited area, thereby generating greater hydraulic pressure for use in forming the spray.

  20. A Bernoulli's Law Lab in a Bottle:

    NASA Astrophysics Data System (ADS)

    David, Guerra; Plaisted, Aaron; Smith, Michael

    2004-03-01

    Bernoulli's law is a fundamental relationship in fluid dynamics, which is covered in most introductory physics classes. The concept is used to explain many important phenomena from fluid flow in pipes to aircraft flight. In an effort to help demonstrate the way in which Bernoulli's law is often applied in fluid dynamics, we have developed a laboratory exercise that employs a common physics lab motion sensor to measure the time it takes water to drain out of an inverted plastic seltzer bottle. Using a series of bottle caps with different sized holes drilled in them, students can easily measure the drain time for systems with different parameters. With the simple data analysis capabilities provided with the sensor students can attain good agreement between experiment and theory. This simple lab gives students an example of how Bernoulli's equation, the continuity equation (conservation of mass), and a few fundamental equations of kinematics can be combined to predict the behavior of a fluid dynamic system. In addition, a closer look at the data also provides an opportunity to discuss some of the subtleties of the system.

  1. Detection of surface algal blooms using the newly developed algorithm surface algal bloom index (SABI)

    NASA Astrophysics Data System (ADS)

    Alawadi, Fahad

    2010-10-01

    Quantifying ocean colour properties has evolved over the past two decades from being able to merely detect their biological activity to the ability to estimate chlorophyll concentration using optical satellite sensors like MODIS and MERIS. The production of chlorophyll spatial distribution maps is a good indicator of plankton biomass (primary production) and is useful for the tracing of oceanographic currents, jets and blooms, including harmful algal blooms (HABs). Depending on the type of HABs involved and the environmental conditions, if their concentration rises above a critical threshold, it can impact the flora and fauna of the aquatic habitat through the introduction of the so called "red tide" phenomenon. The estimation of chlorophyll concentration is derived from quantifying the spectral relationship between the blue and the green bands reflected from the water column. This spectral relationship is employed in the standard ocean colour chlorophyll-a (Chlor-a) product, but is incapable of detecting certain macro-algal species that float near to or at the water surface in the form of dense filaments or mats. The ability to accurately identify algal formations that sometimes appear as oil spill look-alikes in satellite imagery, contributes towards the reduction of false-positive incidents arising from oil spill monitoring operations. Such algal formations that occur in relatively high concentrations may experience, as in land vegetation, what is known as the "red-edge" effect. This phenomena occurs at the highest reflectance slope between the maximum absorption in the red due to the surrounding ocean water and the maximum reflectance in the infra-red due to the photosynthetic pigments present in the surface algae. A new algorithm termed the surface algal bloom index (SABI), has been proposed to delineate the spatial distributions of floating micro-algal species like for example cyanobacteria or exposed inter-tidal vegetation like seagrass. This algorithm was

  2. Effect of algal recycling rate on the performance of Pediastrum boryanum dominated wastewater treatment high rate algal pond.

    PubMed

    Park, J B K; Craggs, R J

    2014-01-01

    Recycling a portion of gravity harvested algae promoted the dominance of a rapidly settling colonial alga, Pediastrum boryanum (P. boryanum) and improved both biomass productivity and settleability in High Rate Algal Pond (HRAP) treating domestic wastewater. The effect of algal recycling rate on HRAP performance was investigated using 12 replicate mesocosms (18 L) that were operated semi-continuously under ambient conditions. Three experiments were conducted during different seasons with each experiment lasting up to 36 days. Recycling 10%, 25%, and 50% of the 'mass' of daily algal production all increased total biomass concentration in the mesocosms. However, recycling >10% reduced the organic content (volatile suspended solids (VSS)) of the mesocosm biomass from 83% to 68% and did not further increase biomass productivity (based on VSS). This indicates that if a HRAP is operated with a low algal concentration and does not utilise all the available sunlight, algal recycling increases the algal concentration up to an optimum level, resulting in higher algal biomass productivity. Recycling 10% of the daily algal production not only increased biomass productivity by ∼40%, but increased biomass settleability by ∼25%, which was probably a consequence of the ∼30% increase in P. boryanum dominance in the mesocosms compared with controls without recycling.

  3. Enzyme assays.

    PubMed

    Reymond, Jean-Louis; Fluxà, Viviana S; Maillard, Noélie

    2009-01-07

    Enzyme assays are analytical tools to visualize enzyme activities. In recent years a large variety of enzyme assays have been developed to assist the discovery and optimization of industrial enzymes, in particular for "white biotechnology" where selective enzymes are used with great success for economically viable, mild and environmentally benign production processes. The present article highlights the aspects of fluorogenic and chromogenic substrates, sensors, and enzyme fingerprinting, which are our particular areas of interest.

  4. 21 CFR 1250.85 - Drinking fountains and coolers; ice; constant temperature bottles.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... temperature bottles. 1250.85 Section 1250.85 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH... Drinking fountains and coolers; ice; constant temperature bottles. (a) Drinking fountains and coolers shall... temperature bottles. (c) Constant temperature bottles and other containers used for storing or...

  5. 21 CFR 1250.85 - Drinking fountains and coolers; ice; constant temperature bottles.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... temperature bottles. 1250.85 Section 1250.85 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH... Drinking fountains and coolers; ice; constant temperature bottles. (a) Drinking fountains and coolers shall... temperature bottles. (c) Constant temperature bottles and other containers used for storing or...

  6. 21 CFR 1250.85 - Drinking fountains and coolers; ice; constant temperature bottles.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... temperature bottles. 1250.85 Section 1250.85 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH... Drinking fountains and coolers; ice; constant temperature bottles. (a) Drinking fountains and coolers shall... temperature bottles. (c) Constant temperature bottles and other containers used for storing or...

  7. 21 CFR 1250.85 - Drinking fountains and coolers; ice; constant temperature bottles.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... temperature bottles. 1250.85 Section 1250.85 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH... Drinking fountains and coolers; ice; constant temperature bottles. (a) Drinking fountains and coolers shall... temperature bottles. (c) Constant temperature bottles and other containers used for storing or...

  8. 21 CFR 1250.85 - Drinking fountains and coolers; ice; constant temperature bottles.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... temperature bottles. 1250.85 Section 1250.85 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH... Drinking fountains and coolers; ice; constant temperature bottles. (a) Drinking fountains and coolers shall... temperature bottles. (c) Constant temperature bottles and other containers used for storing or...

  9. 27 CFR 27.207 - Bottles to be used for display purposes.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... display purposes. 27.207 Section 27.207 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND... Requirements for Liquor Bottles § 27.207 Bottles to be used for display purposes. Empty liquor bottles may be imported and furnished to liquor dealers for display purposes, provided each bottle is marked to show...

  10. 27 CFR 27.207 - Bottles to be used for display purposes.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... display purposes. 27.207 Section 27.207 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND... Requirements for Liquor Bottles § 27.207 Bottles to be used for display purposes. Empty liquor bottles may be imported and furnished to liquor dealers for display purposes, provided each bottle is marked to show...

  11. 27 CFR 27.207 - Bottles to be used for display purposes.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... display purposes. 27.207 Section 27.207 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND... Requirements for Liquor Bottles § 27.207 Bottles to be used for display purposes. Empty liquor bottles may be imported and furnished to liquor dealers for display purposes, provided each bottle is marked to show...

  12. 27 CFR 19.635 - Bottles to be used for display purposes.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... display purposes. 19.635 Section 19.635 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND... Requirements Liquor Bottle Requirements § 19.635 Bottles to be used for display purposes. Liquor bottles may be furnished to liquor dealers for display purposes, provided that each bottle is marked to show that it is...

  13. 27 CFR 27.207 - Bottles to be used for display purposes.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... display purposes. 27.207 Section 27.207 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND... Requirements for Liquor Bottles § 27.207 Bottles to be used for display purposes. Empty liquor bottles may be imported and furnished to liquor dealers for display purposes, provided each bottle is marked to show...

  14. 27 CFR 27.207 - Bottles to be used for display purposes.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... display purposes. 27.207 Section 27.207 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND... Requirements for Liquor Bottles § 27.207 Bottles to be used for display purposes. Empty liquor bottles may be imported and furnished to liquor dealers for display purposes, provided each bottle is marked to show...

  15. Harmful Algal Blooms and Public Health

    PubMed Central

    Grattan, Lynn M.; Holobaugh, Sailor; Morris, J. Glenn

    2015-01-01

    The five most commonly recognized Harmful Algal Bloom related illnesses include Ciguatera poisoning, Paralytic Shellfish poisoning, Neurotoxin Shellfish poisoning, Diarrheic Shellfish Poisoning and Amnesic Shellfish poisoning. Although they are each the product of different toxins, toxin assemblages or HAB precursors these clinical syndromes have much in common. Exposure occurs through the consumption of fish or shellfish; routine clinical tests are not available for diagnosis; there is no known antidote for exposure; and the risk of these illnesses can negatively impact local fishing and tourism industries. Thus, illness prevention is of paramount importance to minimize human and public health risks. To accomplish this, close communication and collaboration is needed among HAB scientists, public health researchers and local, state and tribal health departments at academic, community outreach, and policy levels. PMID:27616971

  16. Harmful Algal Blooms and Public Health.

    PubMed

    Grattan, Lynn M; Holobaugh, Sailor; Morris, J Glenn

    2016-07-01

    The five most commonly recognized Harmful Algal Bloom related illnesses include Ciguatera poisoning, Paralytic Shellfish poisoning, Neurotoxin Shellfish poisoning, Diarrheic Shellfish Poisoning and Amnesic Shellfish poisoning. Although they are each the product of different toxins, toxin assemblages or HAB precursors these clinical syndromes have much in common. Exposure occurs through the consumption of fish or shellfish; routine clinical tests are not available for diagnosis; there is no known antidote for exposure; and the risk of these illnesses can negatively impact local fishing and tourism industries. Thus, illness prevention is of paramount importance to minimize human and public health risks. To accomplish this, close communication and collaboration is needed among HAB scientists, public health researchers and local, state and tribal health departments at academic, community outreach, and policy levels.

  17. The ecology of algal biodiesel production.

    PubMed

    Smith, Val H; Sturm, Belinda S M; Denoyelles, Frank J; Billings, Sharon A

    2010-05-01

    Sustainable energy production represents one of the most formidable problems of the 21st century, and plant-based biofuels offer significant promise. We summarize the potential advantages of using pond-grown microalgae as feedstocks relative to conventional terrestrial biofuel crop production. We show how pond-based algal biofuel production, which requires significantly less land area than agricultural crop-based biofuel systems, can offer additional ecological benefits by reducing anthropogenic pollutant releases to the environment and by requiring much lower water subsidies. We also demonstrate how key principles drawn from the science of ecology can be used to design efficient pond-based microalgal systems for the production of biodiesel fuels.

  18. The dynamics of heterotrophic algal cultures.

    PubMed

    De la Hoz Siegler, H; Ben-Zvi, A; Burrell, R E; McCaffrey, W C

    2011-05-01

    In this work, the time varying characteristics of microalgal cultures are investigated. Microalgae are a promising source of biofuels and other valuable chemicals; a better understanding of their dynamic behavior is, however, required to facilitate process scale-up, optimization and control. Growth and oil production rates are evaluated as a function of carbon and nitrogen sources concentration. It is found that nitrogen has a major role in controlling the productivity of microalgae. Moreover, it is shown that there exists a nitrogen source concentration at which biomass and oil production can be maximized. A mathematical model that describes the effect of nitrogen and carbon source on growth and oil production is proposed. The model considers the uncoupling between nutrient uptake and growth, a characteristic of algal cells. Validity of the proposed model is tested on fed-batch cultures.

  19. Breastfed or bottle-fed: who goes home sooner?

    PubMed

    Briere, Carrie-Ellen

    2015-02-01

    A literature search was conducted to answer the clinical question, "Do premature infants who breastfeed have different oral feeding outcomes compared with those who receive bottles?" The CINAHL, PubMed, and PsycInfo databases were queried for articles published in the past 10 years that reported original research available in English. Two studies specifically addressed a comparison between infants who received exclusive direct breastfeeding, mixed direct breast and bottle, and/or exclusive bottle-feeding. Additional studies were included that addressed oral feeding outcomes specific to either direct breastfeeding (n = 2) or those that grouped bottle and breastfeeding together (n = 3). The findings from these studies indicate that the statement that bottle-feeding leads to sooner discharge is not based in evidence. Although more data are needed to fully understand the differences between direct breastfeeding and bottle-feeding, neonatal intensive care unit staff should be aware of the message they send to breastfeeding families when they encourage the use of bottles over direct breastfeeding.

  20. Fluoride Content of Bottled Drinking Water in Chennai, Tamilnadu

    PubMed Central

    Ravi, Karunya; Rajapandian, K.; Gurunathan, Deepa

    2015-01-01

    Context The optimum level of fluoride in drinking water is 0.7 to 1.2 ppm. Decreased fluoride concentration leads to increased risk of caries and increased concentration can lead to dental or skeletal fluorosis. One crore liters of water is supplied to Chennai and surrounding areas through pouches and bottles which carters about one third of city population. Aim The aim of this study is to determine the fluoride concentration in top 10 bottled waters in Chennai and to check the accuracy of their labelling. Materials and Methods Top selling bottled waters, 6 multinational and 4 Non- multinational brands were selected for the study. Three different batches of each brand were purchased. The labels of the bottled were removed after collecting the details regarding fluoride content. All the bottles were numbered and sent for fluoride content analysis using SPADNS calorimetric method. Results All the brands and batches which were analysed for the study had less than optimal fluoride content and there is a significant variation in fluoride concentration of each brand and among different batches of same brand bottled waters. The range of fluoride level in tested samples was between 0.27 to 0.59. Only one brand’s label had information regarding the fluoride content. Conclusion Standardization of fluoride levels in bottled waters and labelling of fluoride content should become mandatory. PMID:26557612

  1. Algal productivity modeling: a step toward accurate assessments of full-scale algal cultivation.

    PubMed

    Béchet, Quentin; Chambonnière, Paul; Shilton, Andy; Guizard, Guillaume; Guieysse, Benoit

    2015-05-01

    A new biomass productivity model was parameterized for Chlorella vulgaris using short-term (<30 min) oxygen productivities from algal microcosms exposed to 6 light intensities (20-420 W/m(2)) and 6 temperatures (5-42 °C). The model was then validated against experimental biomass productivities recorded in bench-scale photobioreactors operated under 4 light intensities (30.6-74.3 W/m(2)) and 4 temperatures (10-30 °C), yielding an accuracy of ± 15% over 163 days of cultivation. This modeling approach addresses major challenges associated with the accurate prediction of algal productivity at full-scale. Firstly, while most prior modeling approaches have only considered the impact of light intensity on algal productivity, the model herein validated also accounts for the critical impact of temperature. Secondly, this study validates a theoretical approach to convert short-term oxygen productivities into long-term biomass productivities. Thirdly, the experimental methodology used has the practical advantage of only requiring one day of experimental work for complete model parameterization. The validation of this new modeling approach is therefore an important step for refining feasibility assessments of algae biotechnologies.

  2. Computer Simulations of Bottle Brushes: From Melts to Soft Networks

    DOE PAGES

    Cao, Zhen; Carrillo, Jan-Michael Y.; Sheiko, Sergei S.; ...

    2015-07-13

    We use a combination of Molecular dynamics simulations and analytical calculations, and study dens bottle-brush systems in a melt and network State. Analysis of our simulation results shows that bottle-brush macromolecules in melt behave as ideal chains with effective Kuhn length bK. Simulations show that the bottle-brush-induced bending rigidity is due to an entropy decrease caused by redistribution of the side chains upon backbone bending. The Kuhn length of the bottle:brushes increases with increasing the side-chain degree of polymerization nsc as bK proportional to nsc0.46. Moreover, this model of bottle brush macromolecules is extended to describe mechanical properties of bottlemore » brush networks in linear and nonlinear deformation regimes. In the linear deformation regime, the network shear modulus scales with the degree of polymerization of the side chains as G0 proportional to (nsc + 1)-1 as long as the ratio of the Kuhn length, bK, to the size of the fully extended bottle-brush backbone between cross-links, R-max, is smaller than unity, bK/Rmax << 1. Bottle-brush networks With bK/Rmax proportional to 1 demonstrate behavior similar to that of networks Of semiflexible chains with G0 proportional to nsc-0.5. Finally, in the nonlinear network deformation regime, the deformation-dependent shear modulus is a universal function of the first strain invariant I1 and bottle-brush backbone deformation ratio beta describing stretching ability of the bottle-brush backbone between cross-links.« less

  3. Effects of algal-derived carbon on sediment methane ...

    EPA Pesticide Factsheets

    Nutrient loading is known to have adverse consequences for aquatic ecosystems, particularly in the form of algal blooms that may result. These blooms pose problems for humans and wildlife, including harmful toxin release, aquatic hypoxia and increased costs for water treatment. Another potential disservice resulting from algal blooms is the enhanced production of methane (CH4), a potent greenhouse gas, in aquatic sediments. Laboratory experiments have shown that algal biomass additions to sediment cores increase rates of CH4 production, but it is unclear whether or not this effect occurs at the ecosystem scale. The goal of this research was to explore the link between algal-derived carbon and methane production in the sediment of a eutrophic reservoir located in southwest Ohio, using a sampling design that capitalized on spatial and temporal gradients in autochthonous carbon input to sediments. Specifically, we aimed to determine if the within-reservoir gradient of sediment algal-derived organic matter and sediment CH4 production rates correlate. This was done by retrieving sediment cores from 15 sites within the reservoir along a known gradient of methane emission rates, at two separate time points in 2016: late spring before the sediments had received large amounts of algal input and mid-summer after algal blooms had been prevalent in the reservoir. Potential CH4 production rates, sediment organic matter source, and microbial community composition were charac

  4. Life cycle environmental impacts of wastewater-based algal biofuels.

    PubMed

    Mu, Dongyan; Min, Min; Krohn, Brian; Mullins, Kimberley A; Ruan, Roger; Hill, Jason

    2014-10-07

    Recent research has proposed integrating wastewater treatment with algae cultivation as a way of producing algal biofuels at a commercial scale more sustainably. This study evaluates the environmental performance of wastewater-based algal biofuels with a well-to-wheel life cycle assessment (LCA). Production pathways examined include different nutrient sources (municipal wastewater influent to the activated sludge process, centrate from the sludge drying process, swine manure, and freshwater with synthetic fertilizers) combined with emerging biomass conversion technologies (microwave pyrolysis, combustion, wet lipid extraction, and hydrothermal liquefaction). Results show that the environmental performance of wastewater-based algal biofuels is generally better than freshwater-based algal biofuels, but depends on the characteristics of the wastewater and the conversion technologies. Of 16 pathways compared, only the centrate cultivation with wet lipid extraction pathway and the centrate cultivation with combustion pathway have lower impacts than petroleum diesel in all environmental categories examined (fossil fuel use, greenhouse gas emissions, eutrophication potential, and consumptive water use). The potential for large-scale implementation of centrate-based algal biofuel, however, is limited by availability of centrate. Thus, it is unlikely that algal biofuels can provide a large-scale and environmentally preferable alternative to petroleum transportation fuels without considerable improvement in current production technologies. Additionally, the cobenefit of wastewater-based algal biofuel production as an alternate means of treating various wastewaters should be further explored.

  5. Migration of bisphenol A from polycarbonate baby bottles purchased in the Spanish market by liquid chromatography and fluorescence detection.

    PubMed

    Santillana, M I; Ruiz, E; Nieto, M T; Bustos, J; Maia, J; Sendón, R; Sánchez, J J

    2011-11-01

    During the last decade the safety of bisphenol A (BPA) monomer in polycarbonate baby bottles has drawn the attention of both the public and the scientific community. This paper presents the results of BPA migration from polycarbonate baby bottles bought in the Spanish market, into simulant B (3% acetic acid), 50% ethanol and into real food (reconstituted infant formula). Furthermore, it was also the objective of this study to assess the suitability of 50% ethanol as a simulant for infant formula. BPA was analysed by a multi-analyte liquid chromatography method with fluorescence detection and mass spectrometry confirmation. The method was in-house validated and accredited by the national accreditation body. The validation results for this analyte in the previous mentioned matrices were: LOD = 0.004-0.007 mg kg(-1); LOQ (validated) = 0.03 mg kg(-1); RSD% = 3.4-5.8; and recovery = 106.6-118.2%. A collection of 72 different baby bottle samples from 12 different brands were analysed. Baby bottle material was identified by FTIR. The migration test conditions used were those recommended for baby bottles in the Guidelines on testing conditions for articles in contact with foodstuffs (with a focus on kitchenware), prepared by the European network of laboratories for food-contact materials. In most of the migration assays the results were below the LOD. In four of the commercial brands there was detectable migration into the simulant 50% ethanol and BPA was detected in only two samples of infant formula (0.01 mg kg(-1)). Migration results obtained were in compliance with European Union regulations.

  6. Recycling policies and programmes for PET drink bottles in Mexico.

    PubMed

    Schwanse, Elvira

    2011-09-01

    Transition and emerging economies confront a steadily increasing generation of municipal solid waste in the form of disposable packaging. The following article reports the situation of soft drink bottles made of polyethylene terephthalate (PET) in Mexico. Since 2002 schemes following the European Green Dot principle have been partly implemented to place responsibility on the producer, mainly soft drink bottlers. Private stakeholders are responsible for national recovery activities. Meanwhile Government presence to promote recovery is absent. Of post-consumer PET 75% is exported, and the newly created bottle-to-bottle (BTB) PET industry is confronted with bottlenecks in their post-consumer PET supply.

  7. Bottle-makers, bottlers say refillables use more energy

    SciTech Connect

    Weaver, M.

    1982-11-01

    Bottle makers and beverage bottlers who oppose recycling initiatives claim the additional energy used for the required extra thickness, hot-water sterilization, and the collection process counteract any energy saved when fewer bottles are made and reused. They agree that aluminum-can recycling eliminates energy-intensive processes. Used cans are melted and used to make new cans in a process requiring less energy than processes using new aluminum. With a national deposit law, supporters of container legislation claim that the purchase of new containers would drop from 90 to 63 billion a year; energy used for manufacturing, filling, and transporting bottles would drop from 377 to 214 trillion Btus. (DCK)

  8. Evolutionary medicine: bottle feeding, birth spacing, and autism.

    PubMed

    Gallup, Gordon G; Hobbs, Dawn R

    2011-09-01

    To compensate for the high metabolic costs of lactation, the likelihood of re-impregnation shortly after childbirth is normally reduced due to hormonal changes triggered by breast feeding during the postpartum period. Nowadays, however, bottle feeding as a substitute for breast feeding precludes such changes and leads to early postpartum reinstatement of fertility. We suggest that recent data showing the risk of autism goes up dramatically as the time between pregnancies goes down [1] may be a byproduct of bottle feeding. The decision to bottle feed your last child may unwittingly put your next child at risk of being autistic.

  9. Bottle-feeding legislation in Papua New Guinea.

    PubMed

    Lambert, J

    1980-02-01

    Research in Papua New Guinea and elsewhere in the developing world has indicted the dangers of bottle feeding infants. Following a failure to obtain the voluntary agreement of shopkeepers to restrict sales of infant-feeding bottles and teats, legislation was passed which placed these items on prescription. In order to obtain a prescription certain conditions have to be satisfied. A follow-up survey which was carried out in Port Moresby two years after the introduction of legislation indicated a significant decline in the extent of bottle feeding.

  10. An axisymmetric PFEM formulation for bottle forming simulation

    NASA Astrophysics Data System (ADS)

    Ryzhakov, Pavel B.

    2017-01-01

    A numerical model for bottle forming simulation is proposed. It is based upon the Particle Finite Element Method (PFEM) and is developed for the simulation of bottles characterized by rotational symmetry. The PFEM strategy is adapted to suit the problem of interest. Axisymmetric version of the formulation is developed and a modified contact algorithm is applied. This results in a method characterized by excellent computational efficiency and volume conservation characteristics. The model is validated. An example modelling the final blow process is solved. Bottle wall thickness is estimated and the mass conservation of the method is analysed.

  11. Flutist produces four resonances with a single bottle

    NASA Astrophysics Data System (ADS)

    Ruiz, Michael J.; Boysen, Erika

    2017-03-01

    In a dramatic physics demonstration, a professional flutist produces four resonances with a 12 ounce Boylan soda bottle solely through her breath control. The 22 cm bottle acts like a Helmholtz resonator for the lowest pitch. The three higher pitches fall near the 3rd, 5th, and 7th harmonics for a 22 cm closed pipe. A video of this remarkable feat is provided (Ruiz 2016 YouTube: Four Resonances with a 12-ounce Soda Bottle (https://youtu.be/ibtVrp2NF_k)). The video also reveals that a flutist can bend resonance pitches by as much as 10% through control of air speed.

  12. Fungal farmers or algal escorts: lichen adaptation from the algal perspective.

    PubMed

    Piercey-Normore, Michele D; Deduke, Christopher

    2011-09-01

    Domestication of algae by lichen-forming fungi describes the symbiotic relationship between the photosynthetic (green alga or cyanobacterium; photobiont) and fungal (mycobiont) partnership in lichen associations (Goward 1992). The algal domestication implies that the mycobiont cultivates the alga as a monoculture within its thallus, analogous to a farmer cultivating a food crop. However, the initial photobiont 'selection' by the mycobiont may be predetermined by the habitat rather than by the farmer. When the mycobiont selects a photobiont from the available photobionts within a habitat, the mycobiont may influence photobiont growth and reproduction (Ahmadjian & Jacobs 1981) only after the interaction has been initiated. The theory of ecological guilds (Rikkinen et al. 2002) proposes that habitat limits the variety of photobionts available to the fungal partner. While some studies provide evidence to support the theory of ecological guilds in cyanobacterial lichens (Rikkinen et al. 2002), other studies propose models to explain variation in symbiont combinations in green algal lichens (Ohmura et al. 2006; Piercey-Normore 2006; Yahr et al. 2006) hypothesizing the existence of such guilds. In this issue of Molecular Ecology, Peksa & Škaloud (2011) test the theory of ecological guilds and suggest a relationship between algal habitat requirements and lichen adaptation in green algal lichens of the genus Lepraria. The environmental parameters examined in this study, exposure to rainfall, altitude and substratum type, are integral to lichen biology. Lichens have a poikilohydric nature, relying on the availability of atmospheric moisture for metabolic processes. Having no known active mechanism to preserve metabolic thallus moisture in times of drought, one would expect a strong influence of the environment on symbiont adaptation to specific habitats. Adaptation to changes in substrata and its properties would be expected with the intimate contact between crustose

  13. The U.S. Military’s Reliance on Bottled Water During Military Operations

    DTIC Science & Technology

    2011-06-17

    plastic bottle implied purity, and (2) convenience - bottled water is easily carried and stored in vehicles. For example, the Army Food Advisor at the...example, plastic bottles were one of the most costly components of the solid waste streams generated in the Balkans, where there was an abundant supply...the use of bottled water and the impact it has on the U.S. market is the use of oil to produce the plastic bottles . The U.S. market imports

  14. Ship-in-a-bottle catalysts

    DOEpatents

    Haw, James F.; Song, Weiguo

    2006-07-18

    In accordance with the present invention there is provided a novel catalyst system in which the catalytic structure is tailormade at the nanometer scale using the invention's novel ship-in-a-bottle synthesis techniques. The invention describes modified forms of solid catalysts for use in heterogeneous catalysis that have a microporous structure defined by nanocages. Examples include zeolites, SAPOs, and analogous materials that have the controlled pore dimensions and hydrothermal stability required for many industrial processes. The invention provides for modification of these catalysts using reagents that are small enough to pass through the windows used to access the cages. The small reagents are then reacted to form larger molecules in the cages.

  15. Production of biofuel using molluscan pseudofeces derived from algal cells

    DOEpatents

    Das, Keshav C.; Chinnasamy, Senthil; Shelton, James; Wilde, Susan B.; Haynie, Rebecca S.; Herrin, James A.

    2012-08-28

    Embodiments of the present disclosure provide for novel strategies to harvest algal lipids using mollusks which after feeding algae from the growth medium can convert algal lipids into their biomass or excrete lipids in their pseudofeces which makes algae harvesting energy efficient and cost effective. The bioconverter, filter-feeding mollusks and their pseudofeces can be harvested and converted to biocrude using an advanced thermochemical liquefaction technology. Methods, systems, and materials are disclosed for the harvest and isolation of algal lipids from the mollusks, molluscan feces and molluscan pseudofeces.

  16. Inappropriate bottle use: an early risk for overweight? Literature review and pilot data for a bottle-weaning trial.

    PubMed

    Bonuck, Karen A; Huang, Vincent; Fletcher, Jason

    2010-01-01

    Identifying early risk factors for childhood obesity is critical, as weight in infancy and early childhood tracks to later periods. Continued bottle use - primarily from excess milk intake - is emerging as a potential risk factor for early childhood overweight. Over three fourths of US infants drink from bottles beyond the recommended weaning age of 12 months, and two thirds of UK infants use a bottle at 18 months. This paper is divided into three parts. Part 1 reviews the literature on beverage intake, weight and bottle use in young children. Part II describes pilot data on milk bottle use and weight in 12-60-month-olds, collected prior to a randomized controlled (RCT) trial of a bottle-weaning intervention. Median daily milk bottle consumption at 12 months was 5.0 (interquartile range = 3-6). Among 12-36-month-olds, current users were significantly more likely to be >95th% weight-for-height (19% vs. 0%, P < 0.02), and more were >85% weight-for-height (27% vs. 11%, P < 0.11), vs. non-users. In contrast, current bottle use was not associated with either overweight or obesity in 37-60-month-olds. Part III describes the RCT, begun in fall 2008. It is enrolling 464 parent/12-month-old dyads from a nutrition assistance programme for low-income families. Children's bottle use, anthropometrics, dietary intake and nutrient density (via 24 h recall) are assessed quarterly through 24 months of age. For the intervention, site nutritionists employ a project-developed, visually attractive flip chart. An observational study nested within the RCT will describe dietary changes during this period of feeding transitions.

  17. 8. NORTH ELLIS WORKS LOOKING SOUTHWEST. BOTTLING HOUSE, RIGHT, FIVE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. NORTH ELLIS WORKS LOOKING SOUTHWEST. BOTTLING HOUSE, RIGHT, FIVE CHAMBER CONDENSER, AND BURIED NORTH ELLIS THREE PIPE INCLINED RETORT, BACKGROUND LEFT. - Mariscal Quicksilver Mine & Reduction Works, Terlingua, Brewster County, TX

  18. Photos of Lakes Before and After Algal Blooms

    EPA Pesticide Factsheets

    Nutrient pollution can cause algal blooms that are sometimes toxic and always unsightly. The photos on this page show lakes and ponds around the country that have been impacted by this environmental problem.

  19. A seasnake's colour affects its susceptibility to algal fouling.

    PubMed

    Shine, R; Brischoux, F; Pile, A J

    2010-08-22

    Evolutionary transitions from terrestrial to aquatic life modify selective forces on an animal's coloration. For example, light penetrates differently through water than air, and a new suite of predators and visual backgrounds changes the targets of selection. We suggest that an aquatic animal's coloration may also affect its susceptibility to algal fouling. In a colour-polymorphic field population of seasnakes (Emydocephalus annulatus) in New Caledonia, black individuals supported higher algal cover than did banded conspecifics. In experimental tests, black snake models (plastic tubes) accumulated more algae than did banded models. Algal cover substantially reduced snake activity (in the field) and swimming speeds (in the laboratory). Effects of algal cover on a snake's hydrodynamic efficiency and/or its rate of cutaneous gas exchange thus may impose selection on the colours of aquatic organisms.

  20. Harmful Algal Blooms (HABs) Actionable Research for Tribal Communities

    EPA Science Inventory

    Harmful algal blooms (HABs) from algae, cyanobacteria and golden algae may occur naturally. However, human activities appear to be increasing the frequency of some HABs. HABs can have a variety of ecological, economic and human health impacts.

  1. Improving photosynthesis for algal biofuels: toward a green revolution.

    PubMed

    Stephenson, Patrick G; Moore, C Mark; Terry, Matthew J; Zubkov, Mikhail V; Bibby, Thomas S

    2011-12-01

    Biofuels derived from marine algae are a potential source of sustainable energy that can contribute to future global demands. The realisation of this potential will require manipulation of the fundamental biology of algal physiology to increase the efficiency with which solar energy is ultimately converted into usable biomass. This 'photosynthetic solar energy conversion efficiency' sets an upper limit on the potential of algal-derived biofuels. In this review, we outline photosynthetic molecular targets that could be manipulated to increase the efficiency and yield of algal biofuel production. We also highlight modern 'omic' and high-throughput technologies that might enable identification, selection and improvement of algal cell lines on timescales relevant for achieving significant contributions to future energy solutions.

  2. Airborne Monitoring of Harmful Algal Blooms over Lake Erie

    NASA Technical Reports Server (NTRS)

    Tokars, Roger; Lekki, John

    2013-01-01

    The Hyperspectral Imager mounted to an aircraft was used to develop a remote sensing capability to detect the pigment Phycocyanin, an indicator of Microcystis, in low concentration as an early indicator of harmful algal bloom prediction.

  3. Enhancement of algal growth and productivity by grazing zooplankton.

    PubMed

    Porter, K G

    1976-06-25

    Colonies of the common planktonic green alga, Sphaerocystis schroeteri, are only partially disrupted and assimilated by Daphnia magna, a natural predator. The Daphnia break up the outer protective gelatinous sheath that surrounds Sphaerocystis colonies, but most of the algal cells emerge from Daphnia guts intact and in viable condition. During gut passage, these viable cells take up nutrients, such as phosphorus, both from algal remains and from Daphnia metabolites. This nutrient supply stimulates algal carbon fixation and cell division. Enhanced algal growth, observed after gut passage, can compensate for the minor losses to the population caused by grazing. Nutrients regenerated by grazers may produce the summer bloom of gelatinous green algae during the seasonal succession of lake phytoplankton.

  4. Algal Biofuels R&D at NREL (Brochure)

    SciTech Connect

    Not Available

    2012-09-01

    An overview of NREL's algal biofuels projects, including U.S. Department of Energy-funded work, projects with U.S. and international partners, and Laboratory Directed Research and Development projects.

  5. Are empty methadone bottles empty? An analytic study

    PubMed Central

    2014-01-01

    Background Methadone maintenance treatment is the most widely prescribed treatment for opiate dependence with proven benefits for patients. In naïve users or in case of recreational misuse, methadone can be a source of potentially lethal intoxications, resulting in fatal overdoses. A few cases of infantile intoxications have been described in the literature, some of which resulted in death. Nowadays, more than 50,000 bottles are used every day in France, most of which are thrown away in the bin. Relatives at home, especially children, can have access to these empty bottles. This study aims to determine whether the residual quantity of methadone in the bottles is associated with a risk of intoxication for someone who has a low tolerance to opiates, such as a child. Methods The methadone dosage left in a sample of 175 bottles recapped after use by the patients taking their maintenance treatment in an addiction treatment program centre was analysed during a 2-week period in March 2013. Results The mean residual quantity of methadone left in each bottle after use is 1.9 ± 1.8 mg and 3.3 ± 2.4 mg in the sample of 60 mg bottles. Conclusions There is a potential danger of accidental overdose with empty bottles of methadone syrup, especially for children. To take into account this hazard, several harm reduction strategies can be proposed, such as favouring the taking of the treatment within the delivery centres rather than the ‘take home’ doses, asking methadone users to bring back their used bottles, and raising patients’ awareness of the intoxication risks and the necessary everyday precautions. For stable patients with take home methadone, the use of capsules could be considered. PMID:24990630

  6. 2016 National Algal Biofuels Technology Review Fact Sheet

    SciTech Connect

    2016-06-01

    Algae-based biofuels and bioproducts offer great promise in contributing to the U.S. Department of Energy (DOE) Bioenergy Technologies Office’s (BETO’s) vision of a thriving and sustainable bioeconomy fueled by innovative technologies. The state of technology for producing algal biofuels continues to mature with ongoing investment by DOE and the private sector, but additional research, development, and demonstration (RD&D) is needed to achieve widespread deployment of affordable, scalable, and sustainable algal biofuels.

  7. A self-feeding roller bottle for continuous cell culture.

    PubMed

    Berson, R Eric; Friederichs, Goetz

    2008-01-01

    The concept of a self-feeding roller bottle that delivers a continuous supply of fresh media to cells in culture, which is mechanically simplistic and works with existing roller apparatuses, is presented here. A conventional roller bottle is partitioned into two chambers; one chamber contains the fresh culture media reservoir, and the other contains the cell culture chamber. A spiroid of tubing inside the fresh media reservoir acts as a pump when the bottle rotates on its horizontal axis, continuously delivering fresh media through an opening in the partition to the cell culture chamber. The modified bottle proved capable of maintaining steady-state cell densities of a hybridoma cell line over the 10-day period tested, although at lower densities than reached during batch operation due to the continuous volume dilution. Steady-state density proved to be controllable by adjusting the perfusion rate, which changes with the rotation rate of the bottle. Specific antibody production rate is as much as 3.7 times the rate in conventional roller bottles operating with intermittent batch feeding.

  8. A study on the prevalence of Aeromonas spp. and its enterotoxin genes in samples of well water, tap water, and bottled water

    PubMed Central

    Didugu, Hareesh; Thirtham, Madhavarao; Nelapati, Krishnaiah; Reddy, K Kondal; Kumbhar, Baba Saheb; Poluru, Anusha; Pothanaboyina, Guruvishnu

    2015-01-01

    Aim: The aim of this work was to study the prevalence of Aeromonas spp. and its enterotoxin genes in various water sources. Materials and Methods: 125 samples (50 from well water, 50 from tap water, and 25 from bottled water) were collected from various sources in and around Greater Hyderabad Municipal Corporation and examined for the presence of aeromonads by both cultural and polymerase chain reaction (PCR) assay. Alkaline peptone water with ampicillin was used as enrichment. Aeromonas isolation medium and ampicillin dextrin agar were used as selective media. The boiling and snap chilling method was used for DNA extraction. Primers targeted against 16S rRNA, aer, and ast were used to identify aeromonads and its enterotoxins. Results: 48%, 18%, and 12% of well water, tap water, and bottled water samples were found positive by cultural assay with an overall prevalence of 28.8%. Aeromonads were detected in 32 % (52% in well water, 20% in tap water, and 16% in bottled water) of samples by PCR assay. Aerolysin (aer) gene was noticed in 34.6%, 20%, and 0% of well water, tap water, and bottled water samples, respectively, with an overall prevalence of 27.5%. Thermostable cytotonic enterotoxin (ast) was observed in 37.5% (42.3% in well water, 30% in tap water, and 25% in bottled mineral water) of samples. Conclusions: Presence of aeromonads and its toxin genes in various sources of water is of public health concern and emphasizes the need for necessary preventive measures to tackle the problem. PMID:27047024

  9. Biogas production from anaerobic digestion of Spirulina maxima algal biomass

    SciTech Connect

    Samson, R.; LeDuy, A.

    1982-08-01

    The photosynthetic spectrum of solar energy could be exploited for the production of chemical energy of methane through the combined algal-bacterial process. In this process, the algae are mass produced from light and from carbon in the first step. The algal biomass is then used as a nutrient for feeding the anaerobic digester, in the second step, for the production of methane by anaerobic bacteria. The carbon source for the production of algal biomass could be either organic carbon from wastewaters (for eucaryotic algae), or carbon dioxide from the atmosphere or from the combustion exhaust gases (for both prokaryotic and eukaryotic algae). The technical feasibility data on the anaerobic digestion of algal biomass have been reported for many species of algae including macroscopic algae and microscopic algae. Research being conducted in the authors' laboratory consists of using the semimicroscopic blue-green alga Spirulina maxima as the sole substrate for this combined algal-bacterial process. This species of alga is very attractive for the process because of its capability of using the atmospheric carbon dioxide as carbon source and its simple harvesting methods. Furthermore, it appeared that the fermentability of S. maxima is significantly higher than other microscopic algae. This communication presents the results on the anaerobic inoculum development by the adaptation technique. This inoculum was then used for the semicontinuous anaerobic digestion of S. maxima algal biomass. The evolutions of biogas production and composition, biogas yield, total volatile fatty acids, alkalinity, ammonia nitrogen, pH, and electrode potential were followed.

  10. Hexosaminidase assays.

    PubMed

    Wendeler, Michaela; Sandhoff, Konrad

    2009-11-01

    beta-Hexosaminidases (EC 3.2.1.52) are lysosomal enzymes that remove terminal beta-glycosidically bound N-acetylglucosamine and N-acetylgalactosamine residues from a number of glycoconjugates. Reliable assay systems are particularly important for the diagnosis of a family of lysosomal storage disorders, the GM2 gangliosidoses that result from inherited beta-hexosaminidase deficiency. More recently, aberrant hexosaminidase levels have also been found to be associated with a variety of inflammatory diseases. Apart from patient testing and carrier screening, practical in vitro assays are indispensable for the characterization of knock-out mice with potentially altered hexosaminidase activities, for detailed structure-function studies aimed at elucidating the enzymatic mechanism, and to characterize newly described enzyme variants from other organisms. The purpose of this article is to discuss convenient hexosaminidase assay procedures for these and other applications, using fluorogenic or chromogenic artificial substrates as well as the physiological glycolipid substrate GM2. Attempts are also made to provide an overview of less commonly used alternative techniques and to introduce recent developments enabling high-throughput screening for enzyme inhibitors.

  11. Harmful algal bloom smart device application: using image analysis and machine learning techniques for early classification of harmful algal blooms

    EPA Science Inventory

    The Ecological Stewardship Institute at Northern Kentucky University and the U.S. Environmental Protection Agency are collaborating to optimize a harmful algal bloom detection algorithm that estimates the presence and count of cyanobacteria in freshwater systems by image analysis...

  12. Patch recognition of algal blooms and macroalgae

    NASA Astrophysics Data System (ADS)

    Szekielda, K. H.; Bowles, J. H.; Gillis, D. B.; Snyder, W.; Miller, W. D.

    2010-04-01

    Fraunhofer lines and atmospheric absorption bands interfere with the spectral location of absorption bands of photosynthetic pigments in plankton. Hyperspectral data were used to address this interference on identifying absorption bands by applying derivative analysis of radiance spectra. Algal blooms show elevated radiance data even at longer wavelengths compared to oligotrophic water and may reach radiance values of around 800 W/m2/micrometer/sr at a wavelength of about 0.8 μm. Therefore, the use of a spectral range beyond 0.55 μm is useful to describe bloom characteristics. In particular, the slope between 0.55 μm to 0.80 μm shows an advantage to depict gradients in plankton blooms. Radiance spectra in the region from 0.4 to 0.8 μm for oligotrophic water and near coastal water show similar location of absorption bands when analyzed with derivative analysis but with different amplitudes. For this reason, radiance spectra were also analyzed without atmospheric correction, and various approaches to interpret radiance data over plankton blooms were investigated. Cluster analysis and ratio techniques at longer wavelengths were found to assist in the separation of ocean color gradients and distinguish bio-geochemical provinces in near-coastal waters. Furthermore, using the slope of spectra from plankton blooms, in connection with scatter diagrams at various wavelengths, shows that details can be revealed that would not be recognized in single channels at lower wavelength.

  13. Sixty years in algal physiology and photosynthesis.

    PubMed

    Pirson, A

    1994-06-01

    This personal perspective records research experiences in chemistry and biology at four German universities, two before and two after World War II. The research themes came from cytophysiology of green unicellular algae, in particular their photosynthesis. The function of inorganic ions in photosynthesis and dark respiration was investigated at different degrees of specific mineral stress (deficiencies), and the kinetics of recovery followed after the addition of the missing element. Two types of recovery of photosynthesis were observed: indirect restitution via growth processes and immediate normalisation. From the latter case (K(+), phosphate, Mn(++)) the effect of manganese was emphasized as its role in photosynthetic O2 evolution became established during our research. Other themes of our group, with some bearing on photosynthesis were: synchronization of cell growth by light-dark change and effects of blue (vs. red) light on the composition of green cells. Some experiences in connection with algal mass cultures are included. Discussion of several editorial projects shows how photosynthesis, as an orginally separated field of plant biochemistry and biophysics, became included into general cell physiology and even ecophysiology of green plants. The paper contains an appreciation of the authors' main mentor Kurt Noack (1888-1963) and of Ernst Georg Pringsheim (1881-1970), founder of experimental phycology.

  14. Algal Cell Factories: Approaches, Applications, and Potentials

    PubMed Central

    Fu, Weiqi; Chaiboonchoe, Amphun; Khraiwesh, Basel; Nelson, David R.; Al-Khairy, Dina; Mystikou, Alexandra; Alzahmi, Amnah; Salehi-Ashtiani, Kourosh

    2016-01-01

    With the advent of modern biotechnology, microorganisms from diverse lineages have been used to produce bio-based feedstocks and bioactive compounds. Many of these compounds are currently commodities of interest, in a variety of markets and their utility warrants investigation into improving their production through strain development. In this review, we address the issue of strain improvement in a group of organisms with strong potential to be productive “cell factories”: the photosynthetic microalgae. Microalgae are a diverse group of phytoplankton, involving polyphyletic lineage such as green algae and diatoms that are commonly used in the industry. The photosynthetic microalgae have been under intense investigation recently for their ability to produce commercial compounds using only light, CO2, and basic nutrients. However, their strain improvement is still a relatively recent area of work that is under development. Importantly, it is only through appropriate engineering methods that we may see the full biotechnological potential of microalgae come to fruition. Thus, in this review, we address past and present endeavors towards the aim of creating productive algal cell factories and describe possible advantageous future directions for the field. PMID:27983586

  15. Tubular photobioreactor design for algal cultures.

    PubMed

    Molina, E; Fernández, J; Acién, F G; Chisti, Y

    2001-12-28

    Principles of fluid mechanics, gas-liquid mass transfer, and irradiance controlled algal growth are integrated into a method for designing tubular photobioreactors in which the culture is circulated by an airlift pump. A 0.2 m(3) photobioreactor designed using the proposed approach was proved in continuous outdoor culture of the microalga Phaeodactylum tricornutum. The culture performance was assessed under various conditions of irradiance, dilution rates and liquid velocities through the tubular solar collector. A biomass productivity of 1.90 g l(-1) d(-1) (or 32 g m(-2) d(-1)) could be obtained at a dilution rate of 0.04 h(-1). Photoinhibition was observed during hours of peak irradiance; the photosynthetic activity of the cells recovered a few hours later. Linear liquid velocities of 0.50 and 0.35 m s(-1) in the solar collector gave similar biomass productivities, but the culture collapsed at lower velocities. The effect of dissolved oxygen concentration on productivity was quantified in indoor conditions; dissolved oxygen levels higher or lower than air saturation values reduced productivity. Under outdoor conditions, for given levels of oxygen supersaturation, the productivity decline was greater outdoors than indoors, suggesting that under intense outdoor illumination photooxidation contributed to loss of productivity in comparison with productivity loss due to oxygen inhibition alone. Dissolved oxygen values at the outlet of solar collector tube were up to 400% of air saturation.

  16. Algal Cell Factories: Approaches, Applications, and Potentials.

    PubMed

    Fu, Weiqi; Chaiboonchoe, Amphun; Khraiwesh, Basel; Nelson, David R; Al-Khairy, Dina; Mystikou, Alexandra; Alzahmi, Amnah; Salehi-Ashtiani, Kourosh

    2016-12-13

    With the advent of modern biotechnology, microorganisms from diverse lineages have been used to produce bio-based feedstocks and bioactive compounds. Many of these compounds are currently commodities of interest, in a variety of markets and their utility warrants investigation into improving their production through strain development. In this review, we address the issue of strain improvement in a group of organisms with strong potential to be productive "cell factories": the photosynthetic microalgae. Microalgae are a diverse group of phytoplankton, involving polyphyletic lineage such as green algae and diatoms that are commonly used in the industry. The photosynthetic microalgae have been under intense investigation recently for their ability to produce commercial compounds using only light, CO₂, and basic nutrients. However, their strain improvement is still a relatively recent area of work that is under development. Importantly, it is only through appropriate engineering methods that we may see the full biotechnological potential of microalgae come to fruition. Thus, in this review, we address past and present endeavors towards the aim of creating productive algal cell factories and describe possible advantageous future directions for the field.

  17. Adsorption of Nanoplastics on Algal Photosynthesis

    NASA Astrophysics Data System (ADS)

    Turner, James; Bhattacharya, Priyanka; Lin, Sijie; Ke, Pu Chun

    2010-03-01

    The rapid accumulation of disposed plastics in the environment, especially in the Pacific Ocean, has become a global concern in recent years. Photo, chemical and physical degradations constantly fragment these plastics into a wide array of macroscopic to microscopic particles. As a result, marine organisms such as algae may be exposed to plastic particles through ingestion, adsorption and other forms of uptake. Such interactions, currently little understood, could potentially impact on the health state of the entire food chain. Here we report on polystyrene-algae interaction and its impact on algal photosynthesis. We first investigated the adsorption of polystyrene beads (20 nm) on a cellulose film coated on a 96-well plate. We derived a supralinear increase of the adsorption with the beads concentration for both positively and negatively charged polystyrene beads, with a saturation observed for the negatively charged polystyrene beads of concentration above 1.6 mg/mL. Using a bicarbonate indicator we discovered decreased carbon dioxide depletion due to polystyrene-algae binding. Since polystyrene beads also mediated algae aggregation, nanoplastics may alternatively be harnessed for waste water treatment.

  18. Trace and ultratrace metals in bottled waters: survey of sources worldwide and comparison with refillable metal bottles.

    PubMed

    Krachler, Michael; Shotyk, William

    2009-01-15

    Bottled waters from diverse natural and industrial sources are becoming increasingly popular worldwide. Several potentially harmful trace metals (Ag, Be, Li, Ge, Sb, Sc, Te, Th, U) are not monitored regularly in such waters. As a consequence, there is extremely limited data on the abundance and potential health impacts of many potentially toxic trace elements. Containers used for the storage of bottled waters might also increase trace metal levels above threshold limits established for human consumption by the EPA or WHO. Applying strict clean room techniques and sector field ICP-MS, 23 elements were determined in 132 brands of bottled water from 28 countries. In addition, leaching experiments with high purity water and various popular metal bottles investigated the release of trace metals from these containers. The threshold limits for elements such as Al, Be, Mn and U in drinking water were clearly exceeded in some waters. Several bottled waters had Li concentrations in the low mg/L range, a level which is comparable to blood plasma levels of patients treated against manic depression with Li-containing drugs. The rate of release of trace metals from metal bottles assessed after 13 days was generally low, with one exception: Substantial amounts of both Sb and Tl were released from a commercially available pewter pocket flask, exceeding international guidelines 5- and 11-fold, respectively. Trace metal levels of most bottled waters are below guideline levels currently considered harmful for human health. The few exceptions that exist, however, clearly reveal that health concerns are likely to manifest through prolonged use of such waters. The investigated coated aluminium and stainless steel bottles are harmless with respect to leaching of trace metals into drinking water. Pocket flasks, in turn, should be selected with great care to avoid contamination of beverages with harmful amounts of potentially toxic trace metals such as Sb and Tl.

  19. Post-consumer contamination in high-density polyethylene (HDPE) milk bottles and the design of a bottle-to-bottle recycling process.

    PubMed

    Welle, F

    2005-10-01

    Six hundred conventional recycled HDPE flake samples, which were recollected and sorted in the UK, were screened for post-consumer contamination levels. Each analysed sample consisted of 40-50 individual flakes so that the amount of analysed individual containers was in the range 24,000-30,000 post-consumer milk bottles. Predominant contaminants in hot-washed flake samples were unsaturated oligomers, which can be also be found in virgin high-density polyethylene (HDPE) pellet samples used for milk bottle production. In addition, the flavour compound limonene, the degradation product of antioxidant additives di-tert-butylphenol and low amounts of saturated oligomers were found in higher concentrations in the post-consumer samples in comparison with virgin HDPE. However, the overall concentrations in post-consumer recycled samples were similar to or lower than concentration ranges in comparison with virgin HDPE. Contamination with other HDPE untypical compounds was rare and was in most cases related to non-milk bottles, which are <2.1% of the input material of the recycling process. The maximum concentration found in one sample of 1 g was estimated as 130 mg kg(-1), which corresponds to a contamination of 5200-6500 mg kg(-1) in the individual bottle. The recycling process investigated was based on an efficient sorting process, a hot-washing of the ground bottles, and a further deep-cleaning of the flakes with high temperatures and vacuum. Based on the fact that the contamination levels of post-consumer flake samples are similar to virgin HDPE and on the high cleaning efficiency of the super-clean recycling process especially for highly volatile compounds, the recycling process investigated is suitable for recycled post-consumer HDPE bottles for direct food-contact applications. However, hand-picking after automatically sorting is recommended to decrease the amount of non-milk bottles. The conclusions for suitability are valid, provided that the migration testing of

  20. Energetic potential of algal biomass from high-rate algal ponds for the production of solid biofuels.

    PubMed

    Costa, Taynan de Oliveira; Calijuri, Maria Lúcia; Avelar, Nayara Vilela; Carneiro, Angélica de Cássia de Oliveira; de Assis, Letícia Rodrigues

    2016-10-17

    In this investigation, chemical characteristics, higher, lower and net heating value, bulk and energy density, and thermogravimetric analysis were applied to study the thermal characteristics of three algal biomasses. These biomasses, grown as by-products of wastewater treatment in high-rate algal ponds (HRAPs), were: (i) biomass produced in domestic effluent and collected directly from an HRAP (PO); (ii) biomass produced in domestic effluent in a mixed pond-panel system and collected from the panels (PA); and (iii) biomass originating from the treatment effluent from the meat processing industry and collected directly from an HRAP (IN). The biomass IN was the best alternative for thermal power generation. Subsequently, a mixture of the algal biomasses and Jatropha epicarp was used to produce briquettes containing 0%, 25%, 50%, 75%, and 100% of algal biomass, and their properties were evaluated. In general, the addition of algal biomass to briquettes decreased both the hygroscopicity and fixed carbon content and increased the bulk density, ash content, and energy density. A 50% proportion of biomass IN was found to be the best raw material for producing briquettes. Therefore, the production of briquettes consisting of algal biomass and Jatropha epicarp at a laboratory scale was shown to be technically feasible.

  1. Criticality safety requirements for transporting EBR-II fuel bottles stored at INTEC

    SciTech Connect

    Lell, R. M.; Pope, C. L.

    2000-03-14

    Two carrier/shipping cask options are being developed to transport bottles of EBR-II fuel elements stored at INTEC. Some fuel bottles are intact, but some have developed leaks. Reactivity control requirements to maintain subcriticality during the hypothetical transport accident have been examined for both transport options for intact and leaking bottles. Poison rods, poison sleeves, and dummy filler bottles were considered; several possible poison materials and several possible dummy filler materials were studied. The minimum number of poison rods or dummy filler bottles has been determined for each carrier for transport of intact and leaking bottles.

  2. Specificity is rarely absolute in coral–algal symbiosis: implications for coral response to climate change

    PubMed Central

    Silverstein, Rachel N.; Correa, Adrienne M. S.; Baker, Andrew C.

    2012-01-01

    Some reef-building corals have been shown to respond to environmental change by shifting the composition of their algal symbiont (genus Symbiodinium) communities. These shifts have been proposed as a potential mechanism by which corals might survive climate stressors, such as increased temperatures. Conventional molecular methods suggest this adaptive capacity may not be widespread because few (∼25%) coral species have been found to associate with multiple Symbiodinium clades. However, these methods can fail to detect low abundance symbionts (typically less than 10–20% of the total algal symbiont community). To determine whether additional Symbiodinium clades are present, but are not detected using conventional techniques, we applied a high-resolution, real-time PCR assay to survey Symbiodinium (in clades A–D) from 39 species of phylogenetically and geographically diverse scleractinian corals. This survey included 26 coral species thought to be restricted to hosting a single Symbiodinium clade (‘symbiotic specialists’). We detected at least two Symbiodinium clades (C and D) in at least one sample of all 39 coral species tested; all four Symbiodinium clades were detected in over half (54%) of the 26 symbiotic specialist coral species. Furthermore, on average, 68 per cent of all sampled colonies within a given coral species hosted two or more symbiont clades. We conclude that the ability to associate with multiple symbiont clades is common in scleractinian (stony) corals, and that, in coral–algal symbiosis, ‘specificity’ and ‘flexibility’ are relative terms: specificity is rarely absolute. The potential for reef corals to adapt or acclimatize to environmental change via symbiont community shifts may therefore be more phylogenetically widespread than has previously been assumed. PMID:22367985

  3. Specificity is rarely absolute in coral-algal symbiosis: implications for coral response to climate change.

    PubMed

    Silverstein, Rachel N; Correa, Adrienne M S; Baker, Andrew C

    2012-07-07

    Some reef-building corals have been shown to respond to environmental change by shifting the composition of their algal symbiont (genus Symbiodinium) communities. These shifts have been proposed as a potential mechanism by which corals might survive climate stressors, such as increased temperatures. Conventional molecular methods suggest this adaptive capacity may not be widespread because few (∼25%) coral species have been found to associate with multiple Symbiodinium clades. However, these methods can fail to detect low abundance symbionts (typically less than 10-20% of the total algal symbiont community). To determine whether additional Symbiodinium clades are present, but are not detected using conventional techniques, we applied a high-resolution, real-time PCR assay to survey Symbiodinium (in clades A-D) from 39 species of phylogenetically and geographically diverse scleractinian corals. This survey included 26 coral species thought to be restricted to hosting a single Symbiodinium clade ('symbiotic specialists'). We detected at least two Symbiodinium clades (C and D) in at least one sample of all 39 coral species tested; all four Symbiodinium clades were detected in over half (54%) of the 26 symbiotic specialist coral species. Furthermore, on average, 68 per cent of all sampled colonies within a given coral species hosted two or more symbiont clades. We conclude that the ability to associate with multiple symbiont clades is common in scleractinian (stony) corals, and that, in coral-algal symbiosis, 'specificity' and 'flexibility' are relative terms: specificity is rarely absolute. The potential for reef corals to adapt or acclimatize to environmental change via symbiont community shifts may therefore be more phylogenetically widespread than has previously been assumed.

  4. Migration of antimony from polyethylene terephthalate used in mineral water bottles.

    PubMed

    Carneado, S; Hernández-Nataren, E; López-Sánchez, J F; Sahuquillo, A

    2015-01-01

    The influence of storage time and temperature on Sb migration from PET bottles into mineral water was studied in short-term tests lasting up to 15 days and long-term studies lasting up to 220 days. Samples purchased were stored in three different coloured bottles: clear (CL), light blue (LB) and dark blue (DB). Sb migration was assayed by HG-AFS for total determination and HPLC-ICP-MS for speciation analysis. Migration studies showed that waters stored at 4 and 20 °C were not subject to Sb migration. At 40 °C there was a significant increase in Sb concentration, although the maximum limit established by the European Union (5.0 μgL(-)(1)) was not exceeded, whereas at 60 °C samples were subject to considerable Sb migration after 30 days of storage. In this case, the maximum limit established by the European Union was exceeded and both Sb (V) and Sb (III) were detected.

  5. Changes in the sotolon content of dry white wines during barrel and bottle aging.

    PubMed

    Lavigne, Valérie; Pons, Alexandre; Darriet, Philippe; Dubourdieu, Denis

    2008-04-23

    GC-MS in electron ionization mode (EI) was used as a simple, sensitive method for assaying sotolon [4,5-dimethyl-3-hydroxy-2(5) H-furanone] in various dry white wines. The impact of barrel-aging conditions, that is, whether yeast lees were present or not, on the formation of sotolon in dry white wines was then studied. The sotolon content was highest in dry white wines aged in new barrels without lees, often exceeding the perception threshold (8 microg/L). These results demonstrated that yeast lees were capable of minimizing the formation of sotolon in dry white wines during aging. The sotolon and oxygen contents of several bottle of the same white wine were also compared 7 years after bottling. At the range of dissolved oxygen concentrations generally measured, between 5 and 100 microg/L, the sotolon content remained below its perception threshold in wine. The perception threshold was exceeded only in wines with oxygen concentrations above 500 microg/L. The presence of dissolved oxygen in the wine samples analyzed also resulted in a decrease in their free sulfur dioxide content.

  6. Criticality experiments with planar arrays of three-liter bottles containing plutonium nitrate solution

    SciTech Connect

    Durst, B.M.; Clayton, E.D.; Smith, J.H.

    1985-01-01

    The objective of these experiments was to provide benchmark data to validate calculational codes used in critically safety assessments of plant configurations. Arrays containing up to as many as sixteen three-liter bottles filled with plutonium nitrate were used in the experiments. A split-table device was used in the final assembly of the arrays. Ths planar arrays were reflected with close fitting plexiglas on each side and on the bottom but not the top surface. The experiments addressed a number of factors effecting criticality: the critical air gap between bottles in an array of fixed number of bottles, the number of bottles required for criticality if the bottles were touching, and the effect on critical array spacing and critical bottle number due to the insertion of an hydrogeneous substance into the air gap between bottles. Each bottle contained about 2.4l of Pu(NO{sub 3}){sub 4} solution at a Pu concentration of 105g Pu/l, with the {sup 240}Pu content being 2.9 wt% at a free acid molarity H{sup +} of 5.1. After the initial series of experiments were performed with bottles separated by air gaps, plexiglas shells of varying thicknesses were placed around each bottle to investigate how moderation between bottles affects both the number of bottles required for criticality and the critical spacing between each bottle. The minimum of bottles required for criticality was found to be 10.9 bottles, occurring for a square array with bottles in contact. As the bottles were spaced apart, the critical number increased. For sixteen bottles in a square array, the critical separation between surfaces in both x and y direction was 0.96 cm. The addition of plexiglas around each bottle decreased the critical bottle number, compared to those separated in air, but the critical bottle number, even with interstitial plastic in place was always greater than 10.9 bottles. The most reactive configuration was a tightly packed array of bottles with no intervening material.

  7. Effect of sunlight exposure on the release of intentionally and/or non-intentionally added substances from polyethylene terephthalate (PET) bottles into water: chemical analysis and in vitro toxicity.

    PubMed

    Bach, Cristina; Dauchy, Xavier; Severin, Isabelle; Munoz, Jean-François; Etienne, Serge; Chagnon, Marie-Christine

    2014-11-01

    The effect of sunlight exposure on chemical migration into PET-bottled waters was investigated. Bottled waters were exposed to natural sunlight for 2, 6 and 10 days. Migration was dependent on the type of water. Formaldehyde, acetaldehyde and Sb migration increased with sunlight exposure in ultrapure water. In carbonated waters, carbon dioxide promoted migration and only formaldehyde increased slightly due to sunlight. Since no aldehydes were detected in non-carbonated waters, we conclude that sunlight exposure has no effect. Concerning Sb, its migration levels were higher in carbonated waters. No unpredictable NIAS were identified in PET-bottled water extracts. Cyto-genotoxicity (Ames and micronucleus assays) and potential endocrine disruption effects (transcriptional-reporter gene assays) were checked in bottled water extracts using bacteria (Salmonella typhimurium) and human cell lines (HepG2 and MDA-MB453-kb2). PET-bottled water extracts did not induce any toxic effects (cyto-genotoxicity, estrogenic or anti-androgenic activity) in vitro at relevant consumer-exposure levels.

  8. Simultaneous determination and assessment of 4-nonylphenol, bisphenol A and triclosan in tap water, bottled water and baby bottles.

    PubMed

    Li, Xu; Ying, Guang-Guo; Su, Hao-Chang; Yang, Xiao-Bing; Wang, Li

    2010-08-01

    This study investigated the levels of 4-nonylphenol (4-NP), bisphenol A (BPA) and triclosan (TCS) in bottled water and tap water in Guangzhou and release of these chemicals from baby bottles using gas chromatography-mass spectrometry with negative chemical ionization. Results show that 4-NP was present in all the bottled water while 17 out of 21 contained BPA and 18 out of 21 contained TCS. Their concentrations in bottled water ranged from 108 to 298 ng/L, 17.6 to 324 ng/L and 0.6 to 9.7 ng/L, respectively. Five of the tap water samples from six drinking water plants were found to contain 4-NP and BPA both in June and December, while TCS was detected in the same five plants only in June. The highest concentrations in tap water for 4-NP, BPA and TCS were 1987, 317 and 14.5ng/L, respectively. Daily intakes of 4-NP, BPA and TCS of adults by drinking 2L of tap water were estimated to be 1410, 148 and 10 ng/day, respectively. BPA was found to be released within 24h from four brands of baby bottles at room temperature (24 degrees C), 40 degrees C and 100 degrees C. Increased temperature led to higher release of BPA from the baby bottles. Estimated daily intakes of 4-NP, BPA and TCS for infants were 705, 1340 and 5 ng/day, respectively, by drinking 1L of tap water from a baby bottle at 40 degrees C. This study showed that the exposure to the three compounds from drinking water is unlikely to pose a health risk.

  9. TEACHING PHYSICS: Pin-hole water flow from cylindrical bottles

    NASA Astrophysics Data System (ADS)

    Murilo Castro de Oliveira, Paulo; Delfino, Antonio; Vieira Costa, Eden; Faria Leite, Carlos Alberto

    2000-03-01

    We performed an experiment on elementary hydrodynamics. The basic system is a cylindrical bottle from which water flows through a pin-hole located at the bottom of its lateral surface. We measured the speed of the water leaving the pin-hole, as a function of both the time and the current level of water still inside the bottle. The experimental results are compared with the theory. The theoretical treatment is a very simple one based on mass and energy conservation, corresponding to a widespread exercise usually adopted in university basic disciplines of physics. We extended the previous experiment to another similar system using two identical bottles with equivalent pin-holes. The water flowing from the first bottle feeds the second one located below it. The same concepts of mass and energy conservation now lead to a non-trivial differential equation for the lowest bottle dynamics. We solved this equation both numerically and analytically, comparing the results with the experimental data.

  10. Potential health impacts of consuming desalinated bottled water.

    PubMed

    Rowell, Candace; Kuiper, Nora; Shomar, Basem

    2015-06-01

    This study compared physicochemical properties, anion and carbon content and major and trace elements in desalinated and non-desalinated bottled water available in Qatar, and assessed the potential health risks associated with prolonged consumption of desalinated water. Results indicate that Qatar's population is not at elevated risk of dietary exposure to As (mean = 666 ng/L), Ba (48.0 μg/L), Be (9.27 ng/L), Cd (20.1 ng/L), Cr (874 ng/L), Pb (258 ng/L), Sb (475 ng/L) and U (533 ng/L) from consumption of both desalinated and non-desalinated bottled water types available in the country. Consumers who primarily consume desalinated water brands further minimize risk of exposure to heavy metals as levels were significantly lower than in non-desalinated bottled water. Desalinated bottled water was not a significant contributor to recommended daily intakes for Ca, Mg and F(-) for adults and children and may increase risk of deficiencies. Desalinated bottled water accounted for only 3% of the Institute of Medicine (IOM) adequate intake (AI) for Ca, 5-6% of the recommended daily allowance for Mg and 4% of the AI for F among adults. For children desalinated water contributed 2-3% of the IOM AICa, 3-10% of the RDA(Mg) and 3-9% of the AIF.

  11. Ergonomics Designs of Aluminum Beverage Cans and Bottles

    SciTech Connect

    Han Jing; Itoh, Ryouiti; Shinguryo, Takuro; Yamazaki, Koetsu; Nishiyama, Sadao

    2005-08-05

    This paper introduced the finite element analyses into the ergonomics designs to evaluate the human feelings numerically and objectively. Two design examples in developing aluminum beverage cans and bottles are presented. The first example describes a design of the tab of the can with better finger access. A simulation of finger pulling up the tab of the can has been performed and a pain in the finger has been evaluated by using the maximum value of the contact stress of a finger model. The finger access comparison of three kinds of tab ring shape designs showed that the finger access of the tab that may have a larger contact area with finger is better. The second example describes a design of rib-shape embossed bottles for hot vending. Analyses of tactile sensation of heat have been performed and the amount of heat transmitted from hot bottles to finger was used to present the hot touch feeling. Comparison results showed that the hot touch feeling of rib-shape embossed bottles is better than that of cylindrical bottles, and that the shape of the rib also influenced the hot touch feeling.

  12. [Safety verification for reuse of PET and glass bottles].

    PubMed

    Hayashi, Eiichi; Imai, Toshio; Niimi, Hiroji

    2011-01-01

    In order to verify the safety associated with reusing PET and glass bottles, a challenge test was conducted with five surrogate contaminants: 1,1,1-trichloroethane, chlorobenzene, toluene, benzophenone and phenyl cyclohexane. Bottles were filled with a cocktail solution of these contaminants and stored at 50 °C for 7 days, then washed with water and alkaline solutions. Material and migration tests were conducted at each step. The material test results showed that 430-1,440 µg/g of the contaminants were retained after water washing, and that even after washing with a 3.5% NaOH solution, 225-925 µg/g of the contaminants were retained. The migration tests revealed that 0.095-7.35 µg/mL of the contaminants were eluted. Similar tests were conducted with a soft drink ingredient, limonene. The results revealed that 48 µg/g of limonene was retained even after washing with NaOH solution, and that 0.16 µg/mL of limonene was eluted. Conversely, no contaminants were eluted from glass bottles after washing with the NaOH solution. Thus, from the viewpoint of safety and the preservation of content quality, PET bottles are not considered suitable for reuse when compared with glass bottles.

  13. Tension amplification in tethered layers of bottle-brush polymers

    DOE PAGES

    Leuty, Gary M.; Tsige, Mesfin; Grest, Gary S.; ...

    2016-02-26

    In this paper, molecular dynamics simulations of a coarse-grained bead–spring model have been used to study the effects of molecular crowding on the accumulation of tension in the backbone of bottle-brush polymers tethered to a flat substrate. The number of bottle-brushes per unit surface area, Σ, as well as the lengths of the bottle-brush backbones Nbb (50 ≤ Nbb ≤ 200) and side chains Nsc (50 ≤ Nsc ≤ 200) were varied to determine how the dimensions and degree of crowding of bottle-brushes give rise to bond tension amplification along the backbone, especially near the substrate. From these simulations, wemore » have identified three separate regimes of tension. For low Σ, the tension is due solely to intramolecular interactions and is dominated by the side chain repulsion that governs the lateral brush dimensions. With increasing Σ, the interactions between bottle-brush polymers induce compression of the side chains, transmitting increasing tension to the backbone. For large Σ, intermolecular side chain repulsion increases, forcing side chain extension and reorientation in the direction normal to the surface and transmitting considerable tension to the backbone.« less

  14. Tension amplification in tethered layers of bottle-brush polymers

    SciTech Connect

    Leuty, Gary M.; Tsige, Mesfin; Grest, Gary S.; Rubinstein, Michael

    2016-02-26

    In this paper, molecular dynamics simulations of a coarse-grained bead–spring model have been used to study the effects of molecular crowding on the accumulation of tension in the backbone of bottle-brush polymers tethered to a flat substrate. The number of bottle-brushes per unit surface area, Σ, as well as the lengths of the bottle-brush backbones Nbb (50 ≤ Nbb ≤ 200) and side chains Nsc (50 ≤ Nsc ≤ 200) were varied to determine how the dimensions and degree of crowding of bottle-brushes give rise to bond tension amplification along the backbone, especially near the substrate. From these simulations, we have identified three separate regimes of tension. For low Σ, the tension is due solely to intramolecular interactions and is dominated by the side chain repulsion that governs the lateral brush dimensions. With increasing Σ, the interactions between bottle-brush polymers induce compression of the side chains, transmitting increasing tension to the backbone. For large Σ, intermolecular side chain repulsion increases, forcing side chain extension and reorientation in the direction normal to the surface and transmitting considerable tension to the backbone.

  15. A convenient and cost-effective method for monitoring marine algal toxins with passive samplers.

    PubMed

    Rundberget, Thomas; Gustad, Eli; Samdal, Ingunn A; Sandvik, Morten; Miles, Christopher O

    2009-04-01

    Passive sampling disks were developed based on the method of MacKenzie, L, Beuzenberg, V., Holland, P., McNabb, P., Selwood, A. [2004. Solid phase adsorption toxin tracking (SPATT): a new monitoring tool that simulates the biotoxin contamination of filter feeding bivalves. Toxicon 44, 901-918] and protocols were formulated for recovering toxins from the adsorbent resin via elution from small columns. The disks were used in field studies to monitor in situ toxin dynamics during mixed algal blooms at Flødevigen in Norway. Examples are given from time-integrated sampling using the disks followed by extraction and high performance liquid chromatography-mass spectrometry (HPLC-MS) analysis for azaspiracids, okadaic acid analogues, pectenotoxins, yessotoxins and spirolides. Profiles of accumulated toxins in the disks and toxin profiles in blue mussels (Mytilus edulis) were compared with the relative abundance of toxin-producing algal species. Results obtained showed that passive sampling disks correlate with the toxin profiles in shellfish. The passive sampling disks were cheap to produce and convenient to use and, when combined with HPLC-MS or enzyme-linked immunosorbent assay (ELISA) analysis, provide detailed time-averaged information on the profile of lipophilic toxin analogues in the water. Passive sampling is therefore a useful tool for monitoring the exposure of shellfish to the toxigenic algae of concern in northern Europe.

  16. Effects of acidification on algal assemblages in temporary ponds

    SciTech Connect

    Glackin, M.E.; Pratt, J.R.

    1994-12-31

    Atmospheric deposition monitoring in Pennsylvania has characterized a steep gradient of acidic ion depositions across the north-central portion of the state. This study evaluated acidification effects on the composition of algal assemblages in temporary ponds in two forested areas exposed to atmospheric deposition that varied in degree of acidity. Artificial substrates were used to sample and compare the algal assemblages in the two areas. Colonized communities were also transplanted to lower pH ponds to observe changes in species composition. A laboratory microcosm experiment manipulating pH was conducted to reduce the variables that differed between the two areas. Fewer algal taxa were present in lower pH ponds, on colonized substrates after transplant to lower pH ponds, and in lower pH laboratory treatments. Species composition was altered in the lower pH conditions. Most taxa that were excluded from the lower pH ponds naturally also did not survive when experimentally introduced to those conditions. These results suggest that acidification of temporary ponds can alter the structure of algal communities. There is interest in a possible link between acid deposition and reports of worldwide declines in amphibian populations. Algae are an important food source for larval amphibians, such as the wood frog, which require temporary ponds to breed. Changes in algal species composition could potentially impact the temporary pond and forest ecosystem.

  17. Full-scale validation of a model of algal productivity.

    PubMed

    Béchet, Quentin; Shilton, Andy; Guieysse, Benoit

    2014-12-02

    While modeling algal productivity outdoors is crucial to assess the economic and environmental performance of full-scale cultivation, most of the models hitherto developed for this purpose have not been validated under fully relevant conditions, especially with regard to temperature variations. The objective of this study was to independently validate a model of algal biomass productivity accounting for both light and temperature and constructed using parameters experimentally derived using short-term indoor experiments. To do this, the accuracy of a model developed for Chlorella vulgaris was assessed against data collected from photobioreactors operated outdoor (New Zealand) over different seasons, years, and operating conditions (temperature-control/no temperature-control, batch, and fed-batch regimes). The model accurately predicted experimental productivities under all conditions tested, yielding an overall accuracy of ±8.4% over 148 days of cultivation. For the purpose of assessing the feasibility of full-scale algal cultivation, the use of the productivity model was therefore shown to markedly reduce uncertainty in cost of biofuel production while also eliminating uncertainties in water demand, a critical element of environmental impact assessments. Simulations at five climatic locations demonstrated that temperature-control in outdoor photobioreactors would require tremendous amounts of energy without considerable increase of algal biomass. Prior assessments neglecting the impact of temperature variations on algal productivity in photobioreactors may therefore be erroneous.

  18. Impact damage in filament wound composite bottles

    NASA Technical Reports Server (NTRS)

    Highsmith, Alton L.

    1993-01-01

    Increasingly, composite materials are being used in advanced structural applications because of the significant weight savings they offer when compared to more traditional engineering materials. The higher cost of composites must be offset by the increased performance that results from reduced structural weight if these new materials are to be used effectively. At present, there is considerable interest in fabricating solid rocket motor cases out of composite materials, and capitalizing on the reduced structural weight to increase rocket performance. However, one of the difficulties that arises when composite materials are used is that composites can develop significant amounts of internal damage during low velocity impacts. Such low velocity impacts may be encountered in routine handling of a structural component like a rocket motor case. The ability to assess the reduction in structural integrity of composite motor cases that experience accidental impacts is essential if composite rocket motor cases are to be certified for manned flight. While experimental studies of the post-impact performance of filament wound composite motor cases haven been proven performed (2,3), scaling impact data from small specimens to full scale structures has proven difficult. If such a scaling methodology is to be achieved, an increased understanding of the damage processes which influence residual strength is required. The study described herein was part of an ongoing investigation of damage development and reduction of tensile strength in filament wound composites subjected to low velocity impacts. The present study, which focused on documenting the damage that develops in filament wound composites as a result of such impacts, included two distinct tasks. The first task was to experimentally assess impact damage in small, filament wound pressure bottles using x-ray radiography. The second task was to study the feasibility of using digital image processing techniques to assist in

  19. High-Q plasmonic bottle microresonator

    NASA Astrophysics Data System (ADS)

    Mohd Nasir, M. Narizee; Ding, Ming; Murugan, G. Senthil; Zervas, Michalis N.

    2014-03-01

    In this paper, we demonstrate a hybrid plasmonic bottle microresonator (PBMR) which supports whispering gallery modes (WGMs) along with surface plasmon waves (SPWs) for high performance optical sensor applications. The BMR was fabricated through "soften-and-compress" technique with a thin gold layer deposited on top of the resonator. A polarization-resolved measurement was set-up in order to fully characterize the fabricated PBMR. Initially, the uncoated BMR with waist diameter of 181 μm, stem diameter of 125 μm and length of 400 μm was fabricated and then gold film was deposited on the surface. Due to surface curvature, the gold film covering half of the BMR had a characteristic meniscus shape and maximum thickness of 30 nm. The meniscus provides appropriately tapered edges which facilitate the adiabatic transformation of BMR WGMs to SPWs and vice versa. This results in low transition losses, which combined with partially-metal-coated resonator, can result in high hybrid-PBMR Q's. The transmission spectra of the hybrid PBMR are dramatically different to the original uncoated BMR. Under TE(TM) excitation, the PBMR showed composite resonances with Q of ~2100(850) and almost identical ~ 3 nm FSR. We have accurately fitted the observed transmission resonances with Lorentzian-shaped curves and showed that the TE and TM excitations are actually composite resonances comprise of two and three partially overlapping resonances with Q's in excess of 2900 and 2500, respectively. To the best of our knowledge these are the highest Qs observed in plasmonic microcavities.

  20. A bottle crusher, built to facilitate the disposal of liquid scintillation waste.

    PubMed

    Presswell, D; Bailey, M R

    1984-01-01

    A crusher for liquid scintillation bottles, designed to dispose of 2500 bottles per week, employs a revolving drum and sump for collection of spent fluid. Air extraction maintains safe levels by removing flammable vapours.

  1. Copper removal by algae Gelidium, agar extraction algal waste and granulated algal waste: kinetics and equilibrium.

    PubMed

    Vilar, Vítor J P; Botelho, Cidália M S; Boaventura, Rui A R

    2008-03-01

    Biosorption of copper ions by an industrial algal waste, from agar extraction industry has been studied in a batch system. This biosorbent was compared with the algae Gelidium itself, which is the raw material for agar extraction, and the industrial waste immobilized with polyacrylonitrile (composite material). The effects of contact time, pH, ionic strength (IS) and temperature on the biosorption process have been studied. Equilibrium data follow both Langmuir and Langmuir-Freundlich models. The parameters of Langmuir equilibrium model were: q(max)=33.0mgg(-1), K(L)=0.015mgl(-1); q(max)=16.7mgg(-1), K(L)=0.028mgl(-1) and q(max)=10.3mgg(-1), K(L)=0.160mgl(-1) respectively for Gelidium, algal waste and composite material at pH=5.3, T=20 degrees C and IS=0.001M. Increasing the pH, the number of deprotonated active sites increases and so the uptake capacity of copper ions. In the case of high ionic strengths, the contribution of the electrostatic component to the overall binding decreases, and so the uptake capacity. The temperature has little influence on the uptake capacity principally for low equilibrium copper concentrations. Changes in standard enthalpy, Gibbs energy and entropy during biosorption were determined. Kinetic data at different solution pH (3, 4 and 5.3) were fitted to pseudo-first-order and pseudo-second-order models. The adsorptive behaviour of biosorbent particles was modelled using a batch reactor mass transfer kinetic model, which successfully predicts Cu(II) concentration profiles.

  2. Algal cell disruption using microbubbles to localize ultrasonic energy.

    PubMed

    Krehbiel, Joel D; Schideman, Lance C; King, Daniel A; Freund, Jonathan B

    2014-12-01

    Microbubbles were added to an algal solution with the goal of improving cell disruption efficiency and the net energy balance for algal biofuel production. Experimental results showed that disruption increases with increasing peak rarefaction ultrasound pressure over the range studied: 1.90 to 3.07 MPa. Additionally, ultrasound cell disruption increased by up to 58% by adding microbubbles, with peak disruption occurring in the range of 10(8)microbubbles/ml. The localization of energy in space and time provided by the bubbles improve efficiency: energy requirements for such a process were estimated to be one-fourth of the available heat of combustion of algal biomass and one-fifth of currently used cell disruption methods. This increase in energy efficiency could make microbubble enhanced ultrasound viable for bioenergy applications and is expected to integrate well with current cell harvesting methods based upon dissolved air flotation.

  3. Marine algal toxins: origins, health effects, and their increased occurrence.

    PubMed Central

    Van Dolah, F M

    2000-01-01

    Certain marine algae produce potent toxins that impact human health through the consumption of contaminated shellfish and finfish and through water or aerosol exposure. Over the past three decades, the frequency and global distribution of toxic algal incidents appear to have increased, and human intoxications from novel algal sources have occurred. This increase is of particular concern, since it parallels recent evidence of large-scale ecologic disturbances that coincide with trends in global warming. The extent to which human activities have contributed to their increase therefore comes into question. This review summarizes the origins and health effects of marine algal toxins, as well as changes in their current global distribution, and examines possible causes for the recent increase in their occurrence. Images Figure 2 Figure 3 PMID:10698729

  4. Energy evaluation of algal cell disruption by high pressure homogenisation.

    PubMed

    Yap, Benjamin H J; Dumsday, Geoff J; Scales, Peter J; Martin, Gregory J O

    2015-05-01

    The energy consumption of high pressure homogenisation (HPH) was analysed to determine the feasibility of rupturing algal cells for biodiesel production. Experimentally, the processing capacity (i.e. flow rate), power draw and cell disruption efficiency of HPH were independent of feed concentration (for Nannochloropsis sp. up to 25%w/w solids). Depending on the homogenisation pressure (60-150 MPa), the solids concentration (0.25-25%w/w), and triacylglyceride (TAG) content of the harvested algal biomass (10-30%), the energy consumed by HPH represented between 6% and 110-times the energy density of the resulting biodiesel. Provided the right species (weak cell wall and high TAG content) is selected and the biomass is processed at a sufficiently high solids concentration, HPH can consume a small fraction of the energy content of the biodiesel produced. This study demonstrates the feasibility of process-scale algal cell disruption by HPH based on its energy requirement.

  5. Consortium for Algal Biofuel Commercialization (CAB-COMM) Final Report

    SciTech Connect

    Mayfield, Stephen P.

    2015-12-04

    The Consortium for Algal Biofuel Commercialization (CAB-Comm) was established in 2010 to conduct research to enable commercial viability of alternative liquid fuels produced from algal biomass. The main objective of CAB-Comm was to dramatically improve the viability of algae as a source of liquid fuels to meet US energy needs, by addressing several significant barriers to economic viability. To achieve this goal, CAB-Comm took a diverse set of approaches on three key aspects of the algal biofuels value chain: crop protection; nutrient utilization and recycling; and the development of genetic tools. These projects have been undertaken as collaboration between six academic institutions and two industrial partners: University of California, San Diego; Scripps Institution of Oceanography; University of Nebraska, Lincoln; Rutgers University; University of California, Davis; Johns Hopkins University; Sapphire Energy; and Life Technologies.

  6. Yield of trihalomethanes and haloacetic acids upon chlorinating algal cells, and its prediction via algal cellular biochemical composition.

    PubMed

    Hong, Hua Chang; Mazumder, Asit; Wong, Ming Hung; Liang, Yan

    2008-12-01

    The major objective of the present study was to investigate the contribution of major biomolecules, including protein, carbohydrates and lipids, in predicting DBPs formation upon chlorination of algal cells. Three model compounds, including bovine serum albumin (BSA), starch and fish oil, as surrogates of algal-derived proteins, carbohydrates and lipids, and cells of three algae species, representing blue-green algae, green algae, and diatoms, were chlorinated in the laboratory. The results showed that BSA (27 microg mg(-1) C) and fish oil (50 microg mg(-1) C) produced more than nine times higher levels of chloroform than starch (3 microg mg(-1) C). For the formation of HAAs, BSA was shown to have higher reactivity (49 microg mg(-1) C) than fish oil and starch (5 microg mg(-1) C). For the algal cells, Nitzschia sp. (diatom) showed higher chloroform yields (48 microg mg(-1) C) but lower HAA yields (43 microg mg(-1) C) than Chlamydomonas sp. (green algae) (chloroform: 34 microg mg(-1) C; HAA: 62 microg mg(-1) C) and Oscillatoria sp. (blue-green algae) (chloroform: 26 microg mg(-1) C; HAA: 72 microg mg(-1) C). The calculated chloroform formation of cells from the three algal groups, based on their biochemical compositions, was generally consistent with the experimental data, while the predicted values for HAAs were significantly lower than the observed ones. As compared to humic substances, such as humic and fulvic acids, the algal cells appeared to be important precursors of dichloroacetic acid.

  7. Design of algal film photobioreactors: material surface energy effects on algal film productivity, colonization and lipid content.

    PubMed

    Genin, Scott N; Stewart Aitchison, J; Grant Allen, D

    2014-03-01

    A parallel plate air lift reactor was used to examine the growth kinetics of mixed culture algal biofilms grown on various materials (acrylic, glass, polycarbonate, polystyrene and cellulose acetate). The growth kinetics of the algal biofilms were non-linear overall and their overall productivities ranged from 1.10-2.08g/m(2)day, with those grown on cellulose acetate having the highest productivity. Overall algal biofilm productivity was largely explained by differences in the colonization time which in turn was strongly correlated to the polar surface energy of the material, but weakly correlated to water-material contact angle. When colonization time was taken into account, the productivity for all materials except acrylic was not significantly different at approximately 2g/m(2)/day. Lipid content of the algal biofilms ranged from 6% to 8% (w/w) and was not correlated to water-material contact angle or polar surface energy. The results have potential application for selecting appropriate materials for algal film photobioreactors.

  8. Bottle feeding simulates child loss: postpartum depression and evolutionary medicine.

    PubMed

    Gallup, Gordon G; Nathan Pipitone, R; Carrone, Kelly J; Leadholm, Kevin L

    2010-01-01

    At the level of a mother's basic biology, the decision to bottle feed unwittingly mimics conditions associated with the death of an infant. Child loss is a well documented trigger for depression particularly in mothers, and growing evidence shows that bottle feeding is a risk factor for postpartum depression. The implications of this hypothesis for infant feeding practices, hospital procedures that lead to intermittent separation between mothers and infants during the immediate postpartum period, parallels between an increased desire to hold infants by mothers who bottle feed and responses to infant death among nonhuman primates, and the relationship between weaning and depression are discussed in the context of an emerging discipline known as evolutionary medicine.

  9. Relationship between breastfeeding, bottle-feeding and development of malocclusion.

    PubMed

    Narbutytė, Indrė; Narbutytė, Agnė; Linkevičienė, Laura

    2013-01-01

    The importance of breastfeeding to the child's psychological and physical development is evidence-based. However, scientific literature contains controversial opinions on its influence to the development of maxillofacial system. This article aims at reviewing the effects of breastfeeding and bottle-feeding to the development of malocclusion and non-nutritive sucking habits. Thirty-four articles analyzing the above mentioned associations were selected from Pubmed database. Breastfeeding and bottle-feeding may have different impact on the development of maxillofacial system due to unequal functional load of certain facial muscles involved in the feeding processes. Shortage of scientific research prevents from relating bottle-feeding with the development of skeletal malocclusions. Prolonged breastfeeding may have protective effect on developing posterior crossbite and anterior openbite. However, conflicting opinions have been observed. It has been stated that longer duration of breastfeeding diminishes the risk of acquiring non - nutritive sucking habits.

  10. Bottle-feeding and malocclusion: is there an association?

    PubMed

    Meyers, A; Hertzberg, J

    1988-02-01

    To determine whether there is an association between bottle-feeding and malocclusion, a case control study was conducted by means of a questionnaire sent to the parents of 737 patients aged 10 to 12 years from a large private pediatric dental practice. Questions included method and duration of infant feeding, type of nipple used, pacifier use, sucking habits, history of orthodontic treatment, and parental orthodontic history. Analysis of valid responses (N = 454) showed need for treatment to be associated only with history of parental orthodontic treatment (P less than 0.05). A trend toward association of bottle-feeding with need for orthodontic treatment was found in the increasing need for treatment with increasing exposure to bottle, but was of marginal significance (P = 0.058).

  11. Organochlorine pesticides residues in bottled drinking water from Mexico City.

    PubMed

    Díaz, Gilberto; Ortiz, Rutilio; Schettino, Beatriz; Vega, Salvador; Gutiérrez, Rey

    2009-06-01

    This work describes concentrations of organochlorine pesticides in bottled drinking water (BDW) in Mexico City. The results of 36 samples (1.5 and 19 L presentations, 18 samples, respectively) showed the presence of seven pesticides (HCH isomers, heptachlor, aldrin, and p,p'-DDE) in bottled water compared with the drinking water standards set by NOM-127-SSA1-1994, EPA, and World Health Organization. The concentrations of the majority of organochlorine pesticides were within drinking water standards (0.01 ng/mL) except for beta-HCH of BW 3, 5, and 6 samples with values of 0.121, 0.136, and 0.192 ng/mL, respectively. It is important monitoring drinking bottled water for protecting human health.

  12. Plastic bottle oscillator: Rhythmicity and mode bifurcation of fluid flow

    NASA Astrophysics Data System (ADS)

    Kohira, Masahiro I.; Magome, Nobuyuki; Kitahata, Hiroyuki; Yoshikawa, Kenichi

    2007-10-01

    The oscillatory flow of water draining from an upside-down plastic bottle with a thin pipe attached to its head is studied as an example of a dissipative structure generated under far-from-equilibrium conditions. Mode bifurcation was observed in the water/air flow: no flow, oscillatory flow, and counter flow were found when the inner diameter of the thin pipe was changed. The modes are stable against perturbations. A coupled two-bottle system exhibits either in-phase or anti-phase self-synchronization. These characteristic behaviors imply that the essential features of the oscillatory flow in a single bottle system can be described as a limit-cycle oscillation.

  13. Small herbivores suppress algal accumulation on Agatti atoll, Indian Ocean

    NASA Astrophysics Data System (ADS)

    Cernohorsky, Nicole H.; McClanahan, Timothy R.; Babu, Idrees; Horsák, Michal

    2015-12-01

    Despite large herbivorous fish being generally accepted as the main group responsible for preventing algal accumulation on coral reefs, few studies have experimentally examined the relative importance of herbivore size on algal communities. This study used exclusion cages with two different mesh sizes (1 × 1 cm and 6 × 6 cm) to investigate the impact of different-sized herbivores on algal accumulation rates on the shallow (<2 m) back-reef of Agatti atoll, Lakshadweep. The fine-mesh cages excluded all visible herbivores, which had rapid and lasting effects on the benthic communities, and, after 127 d of deployment, there was a visible and significant increase in algae (mainly macroalgae) with algal volume being 13 times greater than in adjacent open areas. The coarse-mesh cages excluded larger fishes (>8 cm body depth) while allowing smaller fishes to access the plots. In contrast to the conclusions of most previous studies, the exclusion of large herbivores had no significant effect on the accumulation of benthic algae and the amount of algae present within the coarse-mesh cages was relatively consistent throughout the experimental period (around 50 % coverage and 1-2 mm height). The difference in algal accumulation between the fine-mesh and coarse-mesh cages appears to be related to the actions of small individuals from 12 herbivorous fish species (0.17 ind. m-2 and 7.7 g m-2) that were able to enter through the coarse mesh. Although restricted to a single habitat, these results suggest that when present in sufficient densities and diversity, small herbivorous fishes can prevent the accumulation of algal biomass on coral reefs.

  14. Fluoride Content of Bottled Drinking Waters in Qatar.

    PubMed

    Almulla, Hessa Ibrahim; King, Nigel M; Alnsour, Hamza Mohammad; Sajnani, Anand K

    2016-12-01

    Fluoridation of drinking water has been recognized as one of the most effective ways of achieving community-wide exposure to the caries prevention effects of fluoride (F). A vast majority of people in Qatar use bottled water for drinking. Use of bottled water without knowing the F level may expose children to dental caries risk if the F level is lower than optimal or to dental fluorosis if the F level is too high. The aim of this study was to determine the F concentration of bottled water available in Qatar. A total of 32 brands of bottled water were evaluated. The F concentrations displayed on the labels were recorded. The F ion-selective electrode method was used to measure the F concentration in water samples, and three measurements were taken for every sample to ensure reproducibility. The p value was set at 0.05. The F concentration ranged from 0.06 to 3.0 ppm with a mean value of 0.8 ppm (±0.88). The F levels were provided by the manufacturers on the labels of 60 % of the samples, but this was significantly lower than the measured F levels (p < 0.0001). Moreover, bottled water that was produced in Saudi Arabia had significantly higher levels of F when compared to those produced in other countries (p < 0.05). There was a wide variation in the F levels in the different brands of bottled water. Furthermore, there was a significant disparity between the F levels which were measured and those that were provided on the labels.

  15. 10 CFR 429.52 - Refrigerated bottled or canned beverage vending machines.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Refrigerated bottled or canned beverage vending machines... bottled or canned beverage vending machines. (a) Sampling plan for selection of units for testing. (1) The requirements of § 429.11 are applicable to refrigerated bottled or canned beverage vending machine; and (2)...

  16. 10 CFR 429.52 - Refrigerated bottled or canned beverage vending machines.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Refrigerated bottled or canned beverage vending machines... bottled or canned beverage vending machines. (a) Sampling plan for selection of units for testing. (1) The requirements of § 429.11 are applicable to refrigerated bottled or canned beverage vending machine; and (2)...

  17. 10 CFR 429.52 - Refrigerated bottled or canned beverage vending machines.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Refrigerated bottled or canned beverage vending machines... bottled or canned beverage vending machines. (a) Sampling plan for selection of units for testing. (1) The requirements of § 429.11 are applicable to refrigerated bottled or canned beverage vending machine; and (2)...

  18. 27 CFR 25.157 - Determination of tax on bottled beer.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... bottled beer. 25.157 Section 25.157 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL BEER Tax on Beer Determination of Tax § 25.157 Determination of tax on bottled beer. The quantities of bottled beer removed subject to tax shall be computed...

  19. 27 CFR 25.157 - Determination of tax on bottled beer.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... bottled beer. 25.157 Section 25.157 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL BEER Tax on Beer Determination of Tax § 25.157 Determination of tax on bottled beer. The quantities of bottled beer removed subject to tax shall be computed...

  20. 27 CFR 25.157 - Determination of tax on bottled beer.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... bottled beer. 25.157 Section 25.157 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Tax on Beer Determination of Tax § 25.157 Determination of tax on bottled beer. The quantities of bottled beer removed subject to tax shall be computed...

  1. 27 CFR 25.157 - Determination of tax on bottled beer.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... bottled beer. 25.157 Section 25.157 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Tax on Beer Determination of Tax § 25.157 Determination of tax on bottled beer. The quantities of bottled beer removed subject to tax shall be computed...

  2. Simple Model of a Rolling Water-Filled Bottle on an Inclined Ramp

    ERIC Educational Resources Information Center

    Lin, Shihao; Hu, Naiwen; Yao, Tianchen; Chu, Charles; Babb, Simona; Cohen, Jenna; Sangiovanni, Giana; Watt, Summer; Weisman, Danielle; Klep, James; Walecki, Wojciech J.; Walecki, Eve S.; Walecki, Peter S.

    2015-01-01

    We investigate a water-filled bottle rolling down an incline and ask the following question: is a rolling bottle better described by a model ignoring all internal motion where the bottle is approximated by a material point sliding down an incline, or is it better described by a rigid solid cylinder rolling down the incline without skidding? The…

  3. 49 CFR 192.175 - Pipe-type and bottle-type holders.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Design of Pipeline Components § 192.175 Pipe-type and bottle-type holders. (a) Each pipe-type and bottle-type holder must be designed so... 49 Transportation 3 2010-10-01 2010-10-01 false Pipe-type and bottle-type holders. 192.175...

  4. Detection algorithm for glass bottle mouth defect by continuous wavelet transform based on machine vision

    NASA Astrophysics Data System (ADS)

    Qian, Jinfang; Zhang, Changjiang

    2014-11-01

    An efficient algorithm based on continuous wavelet transform combining with pre-knowledge, which can be used to detect the defect of glass bottle mouth, is proposed. Firstly, under the condition of ball integral light source, a perfect glass bottle mouth image is obtained by Japanese Computar camera through the interface of IEEE-1394b. A single threshold method based on gray level histogram is used to obtain the binary image of the glass bottle mouth. In order to efficiently suppress noise, moving average filter is employed to smooth the histogram of original glass bottle mouth image. And then continuous wavelet transform is done to accurately determine the segmentation threshold. Mathematical morphology operations are used to get normal binary bottle mouth mask. A glass bottle to be detected is moving to the detection zone by conveyor belt. Both bottle mouth image and binary image are obtained by above method. The binary image is multiplied with normal bottle mask and a region of interest is got. Four parameters (number of connected regions, coordinate of centroid position, diameter of inner cycle, and area of annular region) can be computed based on the region of interest. Glass bottle mouth detection rules are designed by above four parameters so as to accurately detect and identify the defect conditions of glass bottle. Finally, the glass bottles of Coca-Cola Company are used to verify the proposed algorithm. The experimental results show that the proposed algorithm can accurately detect the defect conditions of the glass bottles and have 98% detecting accuracy.

  5. 21 CFR 189.301 - Tin-coated lead foil capsules for wine bottles.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Tin-coated lead foil capsules for wine bottles... lead foil capsules for wine bottles. (a) Tin-coated lead foil is composed of a lead foil coated on one... covering applied over the cork and neck areas) on wine bottles to prevent insect infestation, as a...

  6. 21 CFR 189.301 - Tin-coated lead foil capsules for wine bottles.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Tin-coated lead foil capsules for wine bottles... lead foil capsules for wine bottles. (a) Tin-coated lead foil is composed of a lead foil coated on one... covering applied over the cork and neck areas) on wine bottles to prevent insect infestation, as a...

  7. 21 CFR 189.301 - Tin-coated lead foil capsules for wine bottles.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Tin-coated lead foil capsules for wine bottles. 189... lead foil capsules for wine bottles. (a) Tin-coated lead foil is composed of a lead foil coated on one... covering applied over the cork and neck areas) on wine bottles to prevent insect infestation, as a...

  8. 21 CFR 189.301 - Tin-coated lead foil capsules for wine bottles.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Tin-coated lead foil capsules for wine bottles... lead foil capsules for wine bottles. (a) Tin-coated lead foil is composed of a lead foil coated on one... covering applied over the cork and neck areas) on wine bottles to prevent insect infestation, as a...

  9. 27 CFR 25.157 - Determination of tax on bottled beer.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... bottled beer. 25.157 Section 25.157 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Tax on Beer Determination of Tax § 25.157 Determination of tax on bottled beer. The quantities of bottled beer removed subject to tax shall be computed...

  10. 49 CFR 192.177 - Additional provisions for bottle-type holders.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 3 2013-10-01 2013-10-01 false Additional provisions for bottle-type holders. 192... AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE... Pipeline Components § 192.177 Additional provisions for bottle-type holders. (a) Each bottle-type...

  11. 27 CFR 26.317 - Bottles to be used for display purposes.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... display purposes. 26.317 Section 26.317 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND... ISLANDS Requirements for Liquor Bottles § 26.317 Bottles to be used for display purposes. Empty liquor bottles may be brought into the United States and may be furnished to liquor dealers for display...

  12. 27 CFR 26.317 - Bottles to be used for display purposes.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... display purposes. 26.317 Section 26.317 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND... ISLANDS Requirements for Liquor Bottles § 26.317 Bottles to be used for display purposes. Empty liquor bottles may be brought into the United States and may be furnished to liquor dealers for display...

  13. 27 CFR 26.317 - Bottles to be used for display purposes.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... display purposes. 26.317 Section 26.317 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND... ISLANDS Requirements for Liquor Bottles § 26.317 Bottles to be used for display purposes. Empty liquor bottles may be brought into the United States and may be furnished to liquor dealers for display...

  14. 27 CFR 26.317 - Bottles to be used for display purposes.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... display purposes. 26.317 Section 26.317 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND... ISLANDS Requirements for Liquor Bottles § 26.317 Bottles to be used for display purposes. Empty liquor bottles may be brought into the United States and may be furnished to liquor dealers for display...

  15. 27 CFR 26.317 - Bottles to be used for display purposes.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... display purposes. 26.317 Section 26.317 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND... ISLANDS Requirements for Liquor Bottles § 26.317 Bottles to be used for display purposes. Empty liquor bottles may be brought into the United States and may be furnished to liquor dealers for display...

  16. 27 CFR 19.204 - Alternation of distilled spirits plant and taxpaid wine bottling house premises.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... spirits plant and taxpaid wine bottling house premises. 19.204 Section 19.204 Alcohol, Tobacco Products... distilled spirits plant and taxpaid wine bottling house premises. (a) General. A proprietor of a distilled spirits plant operating a contiguous taxpaid wine bottling house desiring to alternate the use of...

  17. Community Responses to the Removal of Bottled Water on a University Campus

    ERIC Educational Resources Information Center

    Mikhailovich, Katja; Fitzgerald, Robert

    2014-01-01

    Purpose: This paper aimed to examine the impact of the removal of bottled water on the campus community. This paper presents the findings of a survey conducted at the first Australian university to remove single-use bottled water from sale on a small regional university campus. The removal of bottled water from sale at the university formed part…

  18. Mexico-U.S. Harmful Algal Bloom Monitoring Efforts

    NASA Astrophysics Data System (ADS)

    Hu, Chuanmin; Muller-Karger, Frank E.

    2008-06-01

    Workshop on Taxonomy of Harmful Algal Blooms; Veracruz, Mexico, 18-22 February 2008; A workshop on harmful algal bloom (HAB) taxonomy, sponsored by the U.S. Environmental Protection Agency (EPA) and the Department of Health of the state of Veracruz, Mexico, was held at the Aquarium of Veracruz and focused on standardizing methods to detect HABs that affect coastal waters in the Gulf of Mexico. This binational effort was established under the umbrella of the Gulf of Mexico Alliance (GOMA), initially formed in 2004 by the five U.S. Gulf states (Florida, Alabama, Mississippi, Louisiana, and Texas) with participation from U.S. federal agencies and other stakeholders.

  19. Differential aerosolization of algal and cyanobacterial particles in the atmosphere.

    PubMed

    Sharma, Naveen K; Singh, Surendra

    2010-10-01

    Aeroalgal sampling at short height (2.5 m) over natural aquatic and terrestrial algal sources revealed that despite of being similar in size (<1 mm), algal groups vary in their atmospheric abundance. Cyanobacteria were the most abundant, while chlorophytes and bacillariophytes though present, but rare. Statistical analysis (Akaike Information Criterion) showed that climatic factors (temperature, relative humidity, rainfall, wind velocity and sunshine hours) acted in concert, and mainly affected the release and subsequent vertical movement (aerosolization) of algae from natural sources. Variation in aerosolization may affect the atmospheric abundance of algae. These findings have important implication as dispersal limitation may influence the biogeography and biodiversity of microbial algae.

  20. A simple model for forecast of coastal algal blooms

    NASA Astrophysics Data System (ADS)

    Wong, Ken T. M.; Lee, Joseph H. W.; Hodgkiss, I. J.

    2007-08-01

    In eutrophic sub-tropical coastal waters around Hong Kong and South China, algal blooms (more often called red tides) due to the rapid growth of microscopic phytoplankton are often observed. Under favourable environmental conditions, these blooms can occur and subside over rather short time scales—in the order of days to a few weeks. Very often, these blooms are observed in weakly flushed coastal waters under calm wind conditions—with or without stratification. Based on high-frequency field observations of harmful algal blooms at two coastal mariculture zones in Hong Kong, a mathematical model has been developed to forecast algal blooms. The model accounts for algal growth, decay, settling and vertical turbulent mixing, and adopts the same assumptions as the classical Riley, Stommel and Bumpus model (Riley, G.A., Stommel, H., Bumpus, D.F., 1949. Quantitative ecology of the plankton of the western North Atlantic. Bulletin of the Bingham Oceanographic Collection Yale University 12, 1-169). It is shown that for algal blooms to occur, a vertical stability criterion, E < 4 μl2/ π2, must be satisfied, where E, μ, l are the vertical turbulent diffusivity, algal growth rate, and euphotic layer depth respectively. In addition, a minimum nutrient threshold concentration must be reached. Moreover, with a nutrient competition consideration, the type of bloom (caused by motile or non-motile species) can be classified. The model requires as input simple and readily available field measurements of water column transparency and nutrient concentration, and representative maximum algal growth rate of the motile and non-motile species. In addition, with the use of three-dimensional hydrodynamic circulation models, simple relations are derived to estimate the vertical mixing coefficient as a function of tidal range, wind speed, and density stratification. The model gives a quick assessment of the likelihood of algal bloom occurrence, and has been validated against field

  1. Screening of a Marine Algal Extract for Antifungal Activities.

    PubMed

    Lopes, Graciliana; Andrade, Paula B; Valentão, Patrícia

    2015-01-01

    Over the past few years algal extracts have become increasingly interesting to the scientific community due to their promising biological properties. Phlorotannin extracts are particularly attractive partly due to their reported antifungal activity against several yeast and dermatophyte strains.The micromethod used for the evaluation of the minimum inhibitory concentration (MIC) and the minimum lethal concentration (MLC) represents an effective and solvent-saving procedure to evaluate the antifungal activity of algae extracts. Here we describe the micromethod for determining the MIC and the MLC of algal extracts by using the example of a purified phlorotannin extract of brown algae.

  2. Raman and AFM study of gamma irradiated plastic bottle sheets

    NASA Astrophysics Data System (ADS)

    Ali, Yasir; Kumar, Vijay; Sonkawade, R. G.; Dhaliwal, A. S.

    2013-02-01

    In this investigation, the effects of gamma irradiation on the structural properties of plastic bottle sheet are studied. The Plastic sheets were exposed with 1.25MeV 60Co gamma rays source at various dose levels within the range from 0-670 kGy. The induced modifications were followed by micro-Raman and atomic force microscopy (AFM). The Raman spectrum shows the decrease in Raman intensity and formation of unsaturated bonds with an increase in the gamma dose. AFM image displays rough surface morphology after irradiation. The detailed Raman analysis of plastic bottle sheets is presented here, and the results are correlated with the AFM observations.

  3. Efficacy of algal metrics for assessing nutrient and organic enrichment in flowing waters

    USGS Publications Warehouse

    Porter, S.D.; Mueller, D.K.; Spahr, N.E.; Munn, M.D.; Dubrovsky, N.M.

    2008-01-01

    4. Although algal species tolerance to nutrient and organic enrichment is well documented, additional taxonomic and autecological research on sensitive, endemic algal species would further enhance water-quality assessments.

  4. EPA Issues Health Advisories to Protect Americans from Algal Toxins in Drinking Water

    EPA Pesticide Factsheets

    WASHINGTON - The U.S. Environmental Protection Agency (EPA) today issued health advisory values that states and utilities can use to protect Americans from elevated levels of algal toxins in drinking water. Algal blooms in rivers, lakes, and bays so

  5. Nutrient enrichment, phytoplankton algal growth, and estimated rates of instream metabolic processes in the Quinebaug River Basin, Connecticut, 2000-2001

    USGS Publications Warehouse

    Colombo, Michael J.; Grady, Stephen J.; Todd Trench, Elaine C.

    2004-01-01

    A consistent and pervasive pattern of nutrient enrichment was substantiated by water-quality sampling in the Quinebaug River and its tributaries in eastern Connecticut during water years 2000 and 2001. Median total nitrogen and total phosphorus concentrations exceeded the U.S. Environmental Protection Agency?s recently recommended regional ambient water-qual-ity criteria for streams (0.71 and 0.031 milligrams per liter, respectively). Maximum total phosphorus concentrations exceeded 0.1 milligrams per liter at nearly half the sampled locations in the Quinebaug River Basin. Elevated total nitrogen and total phosphorus concentrations were measured at all stations on the mainstem of the Quinebaug River, the French River, and the Little River. Nutrient enrichment was related to municipal wastewater point sources at the sites on the mainstem of the Quinebaug River and French River, and to agricultural nonpoint nutrient sources in the Little River Basin. Nutrient enrichment and favorable physical factors have resulted in excessive, nuisance algal blooms during summer months, particularly in the numerous impoundments in the Quinebaug River system. Phytoplankton algal density as high as 85,000 cells per milliliter was measured during such nuisance blooms in water years 2000 and 2001. Different hydrologic conditions during the summers of 2000 and 2001 produced very different seston algal populations. Larger amounts of precipitation sustained higher streamflows in the summer of 2000 (than in 2001), which resulted in lower total algal abundance and inhibited the typical algal succession from diatoms to cyanobacteria. Despite this, nearly half of all seston chlorophyll-a concentrations measured during this study exceeded the recommended regional ambient stream-water-quality criterion (3.75 micrograms per liter), and seston chlorophyll-a concentrations as large as 42 micrograms per liter were observed in wastewa-ter-receiving reaches of the Quinebaug River. Estimates of primary

  6. Development of a Filtration-Based Bioluminescence Assay for Detection of Microorganisms in Tea Beverages.

    PubMed

    Shinozaki, Yohei; Igarashi, Toshinori; Harada, Yasuhiro

    2016-03-01

    The market for tea drinks as healthy beverages has been steadily expanding, and ready-to-drink beverages in polyethylene terephthalate bottles have been popular. To more rapidly and accurately test tea beverages bottled in polyethylene terephthalate for microbial contamination, a newly developed filtration device and a washing method with a commercial bioluminescence assay were combined to detect low numbers of bacterial spores, fungal conidia, and ascospores. Washing buffers were formulated with nonionic detergents from the Tween series. Commercially available tea beverages were used to evaluate the filtration capacity of the filtration device, the effect of washing buffers, and the performance of the assay. The assay was tested with serially diluted suspensions of colonies of two bacterial strains, spores of three Bacillus strains, conidia of five fungal strains, and ascospores of four fungal strains. The filtration device enabled filtration of a large sample volume (100 to 500 ml), and the washing buffer significantly decreased the background bioluminescence intensity of tea samples when compared with the no-washing method. Low numbers (1 to 10 CFU/100 ml) of the tested strains of bacteria were detected within 8 to 18 h of cultivation, and fungi were detected within 24 to 48 h. Furthermore, a whole bottle (500 ml) of mixed tea was filtered through the filtration device and microbes were detected. This method could be used for quality control of bottled beverages without preincubation.

  7. Algal bloom-associated disease outbreaks among users of freshwater lakes-United States, 2009 - 2010

    EPA Science Inventory

    Algal blooms’ are local abundances of phytoplankton – microscopic photosynthesizing aquatic organisms found in surface waters worldwide; blooms are variable temporally and spatially and frequently produce a visible algal scum on the water. Harmful algal blooms (HABs) are abundan...

  8. Summative Mass Analysis of Algal Biomass - Integration of Analytical Procedures: Laboratory Analytical Procedure (LAP)

    SciTech Connect

    Laurens, L. M. L.

    2013-12-01

    This procedure guides the integration of laboratory analytical procedures to measure algal biomass constituents in an unambiguous manner and ultimately achieve mass balance closure for algal biomass samples. Many of these methods build on years of research in algal biomass analysis.

  9. Turbulence and nutrient interactions that control benthic algal production in an engineered cultivation raceway

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Flow turbulence can be a controlling factor to the growth of benthic algae, but few studies have quantified this relationship in engineered cultivation systems. Experiments were performed to understand the limiting role of turbulence to algal productivity in an algal turf scrubber for benthic algal...

  10. Several properties offilament fibers made from recycled bottles of mineral water using melt spinning method

    NASA Astrophysics Data System (ADS)

    Muslim, Ikhwanul; Mardiyati; Basuki, Arif

    2016-01-01

    Waste mineral water bottles made of PET called post-consumer POSTC-PET packaging with recycling code no. 1 can be made into another material other than the bottle by using a mechanical recycling process. In this experiment carried waste recycling process bottled mineral water bottles of PET into filament fibres with the aid of a melt spinning. From the resulting experimental filament fibres diameter of 14-15 microns, obtained the draw ratio is 1/46, 573,5 - 699,8 MPa tensile strength, modulus of elasticity of 2,01 - 2,45GPa, moisture regain of 2,84. Keywords. PET; Bottle; Fiber; Melt; Spinning; Drawing.

  11. Comparative recovery of microorganisms from BacT/ALERT plastic and glass FA and FN blood culture bottles.

    PubMed

    Riley, J A; Heiter, B J; Bourbeau, P P

    2005-07-01

    bioMerieux, Inc., has recently introduced plastic bottles to replace glass bottles for use in the BacT/ALERT blood culture system. We compared the performance of the plastic to the glass bottles in a large clinical evaluation. Two blood cultures were collected from each patient, one using glass FA (aerobic) and FN (anaerobic) bottles and one using plastic FA and FN bottles. Of the 4,040 sets of four bottles collected, 3,110 contained the recommended 8 to 12 ml of blood, yielding 524 microorganisms with 359 judged to be clinically significant. Of the 359 significant organisms, 255 were recovered in either one or two bottles from both pairs of bottles in a set while 56 organisms were recovered only from the glass bottles and 48 were recovered only from the plastic bottles (P, not significant [NS]). Of the 286 significant organisms recovered only in the FA bottles (glass and plastic), 180 were recovered in both bottles, 57 in the plastic bottles only, and 49 in the glass bottles only (P, NS). Of the 303 significant organisms recovered in the FN bottles only (glass and plastic), 212 were recovered in both bottles, 46 in the plastic bottles only, and 45 in the glass bottles only (P, NS). For individual organisms, the only significant difference in recovery was obtained for Escherichia coli, with more isolates recovered in the FN plastic than in the FN glass bottles (P = 0.02). These data suggest that recovery of microorganisms with plastic FA/FN bottles is at least equal to that with glass FA/FN bottles while offering greater safety for users.

  12. Recent progress and future challenges in algal biofuel production

    PubMed Central

    Shurin, Jonathan B.; Burkart, Michael D.; Mayfield, Stephen P.

    2016-01-01

    Modern society is fueled by fossil energy produced millions of years ago by photosynthetic organisms. Cultivating contemporary photosynthetic producers to generate energy and capture carbon from the atmosphere is one potential approach to sustaining society without disrupting the climate. Algae, photosynthetic aquatic microorganisms, are the fastest growing primary producers in the world and can therefore produce more energy with less land, water, and nutrients than terrestrial plant crops. We review recent progress and challenges in developing bioenergy technology based on algae. A variety of high-value products in addition to biofuels can be harvested from algal biomass, and these may be key to developing algal biotechnology and realizing the commercial potential of these organisms. Aspects of algal biology that differentiate them from plants demand an integrative approach based on genetics, cell biology, ecology, and evolution. We call for a systems approach to research on algal biotechnology rooted in understanding their biology, from the level of genes to ecosystems, and integrating perspectives from physical, chemical, and social sciences to solve one of the most critical outstanding technological problems. PMID:27781084

  13. Invasive algal mats degrade coral reef physical habitat quality

    NASA Astrophysics Data System (ADS)

    Martinez, Jonathan A.; Smith, Celia M.; Richmond, Robert H.

    2012-03-01

    Invasive species alter the ecology of marine ecosystems through a variety of mechanisms or combination of mechanisms. This study documented critical physical parameters altered by the invasive red macroalga Gracilaria salicornia in situ, including: reduced irradiance, increased sedimentation, and marked variation in diurnal dissolved oxygen and pH cycles in Kāne'ohe Bay, O'ahu, Hawai'i. Paired studies showed that algal mats reduced irradiance by 99% and doubled sediment accumulation. Several mats developed hypoxia and hyperoxia in the extreme minima and maxima, though there was no statistical difference detected in the mean or the variability of dissolved oxygen between different 30 min time points of 24 h cycles between algal mat-open reef pairs. The algal mat significantly acidified the water under the algal mat by decreasing pH by 0.10-0.13 pH units below open reef pH. A minimum of pH 7.47 occurred between 14 and 19 h after sunrise. Our combined results suggest that mats of G. salicornia can alter various physical parameters on a fine scale and time course not commonly detected. These changes in parameters give insight into the underlying basis for negative impact, and suggest new ways in which the presence of invasive species leads to decline of coral reef ecosystems.

  14. Harmful Algal Blooms and Drinking Water Treatment Research

    EPA Science Inventory

    EPA has been conducting algal bloom research at multiple facilities around Lake Erie over the past few years to help communities confront the challenge of keeping cyanobacterial toxins from reaching consumers’ taps, while minimizing the financial burden. The first goal of this re...

  15. Effects of solar ultraviolet radiation on tropical algal communities

    SciTech Connect

    Santas, R.

    1989-01-01

    This study assessed some of the effects of solar ultraviolet (UV) radiation ion coral reef algal assemblages. The first part of the investigation was carried out under controlled laboratory conditions in the coral reef microcosm at the National Museum of Natural History in Washington, D.C., while a field counterpart was completed at the Smithsonian Institution's marine station on Grand Turk, Turks and Caicos Islands, in the eastern Caribbean. The study attempted to separate the effects of UV-A from those of UV-B. In the laboratory, algal turf assemblages exposed to simulated solar UV radiation produced 55.1% less biomass than assemblages that were not exposed to UV. Assemblages not exposed to UV were dominated by Ectocarpus rhodochondroides, whereas in the assemblage developing under high UV radiation, Enteromorpha prolifera and eventually Schizothrix calcicola dominated. Lower UV-B irradiances caused a proportional reduction in biomass production and had less pronounced effects on species composition. UV-A did not have any significant effects on either algal turf productivity or community structure. In the field, assemblages exposed to naturally occurring solar UV supported a biomass 40% lower than that of assemblages protected from UV-B exposure. Once again, UV-A did not inhibit algal turf productivity.

  16. Studies of the effect of gibberellic acid on algal growth.

    NASA Technical Reports Server (NTRS)

    Evans, W. K.; Sorokin, C.

    1971-01-01

    The effect of gibberellic acid on exponential growth rate of four strains of Chlorella was investigated under variety of experimental conditions. In concentrations from 10 ppm to 100 ppm, gibberellic acid was shown to have no effect on Chlorella growth. In concentration of 200 ppm, gibberellic acid exerted some unfavorable effect on algal growth.

  17. Miocene lacustrine algal reefs—southwestern Snake River Plain, Idaho

    NASA Astrophysics Data System (ADS)

    Straccia, Frances G.; Wilkinson, Bruce H.; Smith, Gerald R.

    1990-04-01

    The Hot Spring limestone is a shallow-water algal carbonate within a late Tertiary transgressive lacustrine sequence exposed in the southwestern Snake River Plain. This 5 m thick lensoid sequence crops out over an 80 km 2 area that closely approximates original areal extent of nearshore carbonate accumulation. Reefal bodies consist of closely packed algal cylinders, several decimeters in height, each of which includes a dense laminated carbonate wall surrounding porous digitate carbonate that radiates outward and upward from one or more hollow tubes. These coalesce upsection into separate vertical columns several meters in diameter. Moderately well-sorted terrigenous and molluscan debris deposited between columns during growth indicates these structures were resistant to wave erosion and, therefore, were true reefs. Thick rings of littoral carbonate surrounding the upper walls of each column record the final stages of reef development. Structural attributes exhibited by these Miocene carbonate bodies are also common to a number of Tertiary and Quaternary algal buildups reported from other lacustrine settings. Although features within the Hot Spring limestone are complex in gross morphology and structural detail, both columnar reefs and algal cylinders display little variation in size, shape, or internal structure between areas of varying water depth and wave energy, thus reflecting the importance of biological processes as well as physical processes during reef development.

  18. Numerical simulation of an algal bloom in Dianshan Lake

    NASA Astrophysics Data System (ADS)

    Chen, Yizhong; Lin, Weiqing; Zhu, Jianrong; Lu, Shiqiang

    2016-01-01

    A hydrodynamic model and an aquatic ecology model of Dianshan Lake, Shanghai, were built using a hydrodynamic simulation module and the water quality simulation module of Delft3D, which is an integrated modelling suite offered by Deltares. The simulated water elevation, current velocity, and direction were validated with observed data to ensure the reliability of hydrodynamic model. The seasonal growth of different algae was analyzed with consideration of observed and historical data, as well as simulated results. In 2008, the dominant algae in Dianshan Lake was Bacillariophyta from February to March, while it was Chlorophyta from April to May, and Cyanophyta from July to August. In summer, the biomass of Cyanophyta grew quickly, reaching levels much higher than the peaks of Bacillariophyta and Chlorophyta. Algae blooms primarily occurred in the stagnation regions. This phenomenon indicates that water residence time can influence algal growth significantly. A longer water residence time was associated with higher algal growth. Two conclusions were drawn from several simulations: reducing the nutrients inflow had little effect on algal blooms in Dianshan Lake; however, increasing the discharge into Dianshan Lake could change the flow field characteristic and narrow the range of stagnation regions, resulting in inhibition of algal aggregation and propagation and a subsequent reduction in areas of high concentration algae.

  19. Mechanism of Algal Aggregation by Bacillus sp. Strain RP1137

    PubMed Central

    Powell, Ryan J.

    2014-01-01

    Alga-derived biofuels are one of the best alternatives for economically replacing liquid fossil fuels with a fungible renewable energy source. Production of fuel from algae is technically feasible but not yet economically viable. Harvest of dilute algal biomass from the surrounding water remains one of the largest barriers to economic production of algal biofuel. We identified Bacillus sp. strain RP1137 in a previous study and showed that this strain can rapidly aggregate several biofuel-producing algae in a pH- and divalent-cation-dependent manner. In this study, we further characterized the mechanism of algal aggregation by RP1137. We show that aggregation of both algae and bacteria is optimal in the exponential phase of growth and that the density of ionizable residues on the RP1137 cell surface changes with growth stage. Aggregation likely occurs via charge neutralization with calcium ions at the cell surface of both algae and bacteria. We show that charge neutralization occurs at least in part through binding of calcium to negatively charged teichoic acid residues. The addition of calcium also renders both algae and bacteria more able to bind to hydrophobic beads, suggesting that aggregation may occur through hydrophobic interactions. Knowledge of the aggregation mechanism may enable engineering of RP1137 to obtain more efficient algal harvesting. PMID:24771029

  20. Development and optimization of biofilm based algal cultivation

    NASA Astrophysics Data System (ADS)

    Gross, Martin Anthony

    This dissertation describes research done on biofilm based algal cultivation systems. The system that was developed in this work is the revolving algal biofilm cultivation system (RAB). A raceway-retrofit, and a trough-based pilot-scale RAB system were developed and investigated. Each of the systems significantly outperformed a control raceway pond in side-by-side tests. Furthermore the RAB system was found to require significantly less water than the raceway pond based cultivation system. Lastly a TEA/LCA analysis was conducted to evaluate the economic and life cycle of the RAB cultivation system in comparison to raceway pond. It was found that the RAB system was able to grow algae at a lower cost and was shown to be profitable at a smaller scale than the raceway pond style of algal cultivation. Additionally the RAB system was projected to have lower GHG emissions, and better energy and water use efficiencies in comparison to a raceway pond system. Furthermore, fundamental research was conducted to identify the optimal material for algae to attach on. A total of 28 materials with a smooth surface were tested for initial cell colonization and it was found that the tetradecane contact angle of the materials had a good correlation with cell attachment. The effects of surface texture were evaluated using mesh materials (nylon, polypropylene, high density polyethylene, polyester, aluminum, and stainless steel) with openings ranging from 0.05--6.40 mm. It was found that both surface texture and material composition influence algal attachment.

  1. Mechanism of algal aggregation by Bacillus sp. strain RP1137.

    PubMed

    Powell, Ryan J; Hill, Russell T

    2014-07-01

    Alga-derived biofuels are one of the best alternatives for economically replacing liquid fossil fuels with a fungible renewable energy source. Production of fuel from algae is technically feasible but not yet economically viable. Harvest of dilute algal biomass from the surrounding water remains one of the largest barriers to economic production of algal biofuel. We identified Bacillus sp. strain RP1137 in a previous study and showed that this strain can rapidly aggregate several biofuel-producing algae in a pH- and divalent-cation-dependent manner. In this study, we further characterized the mechanism of algal aggregation by RP1137. We show that aggregation of both algae and bacteria is optimal in the exponential phase of growth and that the density of ionizable residues on the RP1137 cell surface changes with growth stage. Aggregation likely occurs via charge neutralization with calcium ions at the cell surface of both algae and bacteria. We show that charge neutralization occurs at least in part through binding of calcium to negatively charged teichoic acid residues. The addition of calcium also renders both algae and bacteria more able to bind to hydrophobic beads, suggesting that aggregation may occur through hydrophobic interactions. Knowledge of the aggregation mechanism may enable engineering of RP1137 to obtain more efficient algal harvesting.

  2. Autonomous benthic algal cultivator under feedback control of ecosystem metabolism

    Technology Transfer Automated Retrieval System (TEKTRAN)

    An autonomous and internally-controlled techno-ecological hybrid was developed that controls primary production of algae in a laboratory-scale cultivator. The technoecosystem is based on an algal turf scrubber (ATS) system that combines engineered feedback control programming with internal feedback...

  3. Water Jets from Bottles, Buckets, Barrels, and Vases with Holes

    ERIC Educational Resources Information Center

    Lopac, Vjera

    2015-01-01

    Observation of the water jets flowing from three equidistant holes on the side of a vertical cylindrical bottle is an interesting and widely used didactical experiment illustrating the laws of fluids in motion. In this paper we analyze theoretically and numerically the ranges of the stationary water jets flowing from various rotationally symmetric…

  4. Reducing Baby Bottle Tooth Decay. A SERVE Research Brief.

    ERIC Educational Resources Information Center

    Southeastern Regional Vision for Education (SERVE), Tallahassee, FL.

    This pamphlet discusses strategies for reducing baby bottle tooth decay (BBTD) among Native American children. BBTD in infants and toddlers is a painful disease characterized by extensive decay of the upper front and side teeth. It is caused by prolonged exposure of teeth to carbohydrates, such as those contained in infant formula, milk, and fruit…

  5. Perceptions of bottled water consumers in three Brazilian municipalities.

    PubMed

    de Queiroz, Josiane T Matos; Doria, Miguel de França; Rosenberg, Mark W; Heller, Léo; Zhouri, Andréa

    2013-09-01

    This study presents perceptions of consumers of bottled water in their households in three Brazilian municipalities. Data from interviews were analyzed using the Discourse Collective Subject method. Interviewees spent, on average, the equivalent of 40% of their water bill for the public water supply on the purchase of bottled water. The decision about water consumption in the household was predominantly made by women. Interviewees were particularly concerned with health risks and expressed a strong preference for the safety and organoleptic qualities of bottled water, particularly in cases where the tap water supply did not fully meet the regulated water quality standards. Interviewees were largely unaware of the origin, type, storage, and social and environmental impacts of bottled water. Results highlight the importance of water education efforts among the general population and the key role of women in the processes related to drinking water. The need for gender-specific interventions and the empowerment of women on water issues is noted. Results also strongly support the relevance of ensuring the provision of safe drinking water, from the source to the consumption point, with the trust of consumers.

  6. One Man's Rubbish … Active Learning Using Old Bottle Tops

    ERIC Educational Resources Information Center

    Orlando, Clare; Orlando, Antonio

    2014-01-01

    This is an activity for younger learners in which the concepts of relative frequency and probability are explored, illustrating how a creative, non-transmission teaching approach using bottle tops can enable students to develop their understanding in an engaging fashion and at almost no cost.

  7. 27 CFR 31.201 - Refilling of liquor bottles.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Refilling of liquor bottles. 31.201 Section 31.201 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL ALCOHOL BEVERAGE DEALERS Reuse and Possession of Used...

  8. 27 CFR 31.201 - Refilling of liquor bottles.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Refilling of liquor bottles. 31.201 Section 31.201 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS ALCOHOL BEVERAGE DEALERS Reuse and Possession of Used...

  9. 27 CFR 31.201 - Refilling of liquor bottles.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Refilling of liquor bottles. 31.201 Section 31.201 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS ALCOHOL BEVERAGE DEALERS Reuse and Possession of Used...

  10. The Blue Bottle Experiment and Pattern Formation in this System

    NASA Astrophysics Data System (ADS)

    Adamčíková, L'.; Ševčík, P.

    1997-09-01

    The methylene blue - saccharide - NaOH system, the so-called "Blue Bottle" experiment was investigated. When this system is poured into an open petri dish, spatial structures start to generate after an induction period. The induction period increases in the order of xylose < glucose < galactose < arabinose < mannose.

  11. NASA-Enhanced Water Bottles Filter Water on the Go

    NASA Technical Reports Server (NTRS)

    2014-01-01

    Complex systems on the ISS collect and recycle moisture from every possible source-including sweat and urine-to be filtered for recycled use. Greenbrae, California-based ÖKO now sells a water bottle that employs NASA filtration media to purify water as the user squeezes it through the device.

  12. Exploring Klein Bottles through Pottery: A STEAM Investigation

    ERIC Educational Resources Information Center

    Smith, Christopher E.; Paré, Jana N.

    2016-01-01

    While one author was reading "The Simpsons and Their Mathematical Secrets by Simon Singh" (2013) in preparation for a presentation, the second author asked what in the book would be interesting to discuss. The topic of Klein bottles was on the first author's mind at that moment, so he tried to describe and explain the form to her--a real…

  13. The Use of Plastic Lemonade Bottles as Fermenter Reaction Vessels.

    ERIC Educational Resources Information Center

    Walker, David; Howard, Barry

    1988-01-01

    Describes the construction and uses of a low cost fermenter reaction vessel which is suitable for laboratory growth of microorganisms by continuous and batch cultures from plastic soft drink bottles. Lists materials, discusses modifications that can be made and gives examples of use. (CW)

  14. Whoosh Bottle Safety, Again: What about What Is inside?

    ERIC Educational Resources Information Center

    Gregory, Robert B.; Lauber, Matthew

    2012-01-01

    Studies regarding the whoosh bottle combustion experiment have largely focused on the detonation hazard of the demonstration, particularly with regards to fuel and container choice. Previous work has suggested that the fuel should be 2-propanol owing to its relatively cool flame characteristics. The current study has found that the combustion of…

  15. Putting Time in a Bottle--Or a Box!

    ERIC Educational Resources Information Center

    Turner, Thomas N.

    1989-01-01

    Discusses the problems of teaching time concepts to children. Suggests alternatives to the traditional time line. Describes the use of bottles and boxes as symbols of units of time when encouraging children to visualize and understand time. Provides information which will assist teachers in using these techniques. (KO)

  16. A Computer Model for Soda Bottle Oscillations: "The Bottelator".

    ERIC Educational Resources Information Center

    Soltzberg, Leonard J.; And Others

    1997-01-01

    Presents a model to explain the behavior of oscillatory phenomena found in the soda bottle oscillator. Describes recording the oscillations, and the design of the model based on the qualitative explanation of the oscillations. Illustrates a variety of physiochemical concepts including far-from-equilibrium oscillations, feedback, solubility and…

  17. Bottle Babies: A Guide to the Baby Foods Issue. Revised.

    ERIC Educational Resources Information Center

    Cottingham, Jane, Comp.

    This guide has been compiled as an aide-memoire and resource book about the increasing incidence of malnutrition in infants caused by bottle feeding in the Third World. It deals with four major interrelated issues: (1) the prevalence of protein energy malnutrition, (2) the importance of breast milk, not only in preventing malnutrition and disease…

  18. The Rod and Bottle System: A Problem in Statics

    NASA Astrophysics Data System (ADS)

    MacInnes, Iain

    2005-11-01

    The rod and bottle system (sometimes called the "wine butler"), shown in Fig. 1, is a common statics demonstration in the introductory level physics course. One is immediately attracted to it by the craftsmanship in wood. Thomas Carlyle wrote, "Two men I honour, and no third. The scholar and the craftsman."2 This paper presents an analytic treatment of the system.

  19. Photocatalytic Coats in Glass Drinking-Water Bottles

    NASA Technical Reports Server (NTRS)

    Andren, Anders W.; Armstrong, David E.; Anderson, Marc A.

    2005-01-01

    According to a proposal, the insides of glass bottles used to store drinking water would be coated with films consisting of or containing TiO2. In the presence of ultraviolet light, these films would help to remove bacteria, viruses, and trace organic contaminants from the water.

  20. Painting Cloud Nine: A Study of Magritte's Bottle Series.

    ERIC Educational Resources Information Center

    Turner, Dianne

    2000-01-01

    Provides background information on Rene Magritte and his work. Offers an activity in which elementary and middle school students can learn about Magritte's sky and silhouette series of painted wine bottles. Explains that the lesson should be used when students are learning about poetry in language arts classes. (CMK)

  1. Solar Heating for a Bottling Plant -- Jackson, Tennessee

    NASA Technical Reports Server (NTRS)

    1982-01-01

    Report describes retrofit solar-heating system designed for and installed in bottle works in Tennessee. System consists of 9,480 square feet (880 Square meters) of evacuated-tube solar collectors with attached specular cylindrical reflectors. Tubular collectors are expected to supply 55 percent of total thermal load.

  2. 27 CFR 19.353 - Bottling tank gauge.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Bottling tank gauge. 19.353 Section 19.353 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL DISTILLED SPIRITS PLANTS Processing of Distilled Spirits Rules...

  3. 27 CFR 19.387 - Completion of bottling.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Completion of bottling. 19.387 Section 19.387 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Processing Operations Other Than Denaturation...

  4. 27 CFR 19.354 - Bottling or packaging records.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Bottling or packaging records. 19.354 Section 19.354 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Processing of Distilled Spirits...

  5. 27 CFR 19.354 - Bottling or packaging records.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Bottling or packaging records. 19.354 Section 19.354 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL DISTILLED SPIRITS PLANTS Processing of Distilled Spirits...

  6. 27 CFR 19.354 - Bottling or packaging records.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Bottling or packaging records. 19.354 Section 19.354 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL DISTILLED SPIRITS PLANTS Processing of Distilled Spirits...

  7. 27 CFR 19.354 - Bottling or packaging records.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Bottling or packaging records. 19.354 Section 19.354 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Processing of Distilled Spirits...

  8. 27 CFR 19.364 - Bottled-in-bond spirits.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Bottled-in-bond spirits. 19.364 Section 19.364 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL DISTILLED SPIRITS PLANTS Processing of Distilled Spirits Rules...

  9. 27 CFR 19.599 - Bottling and packaging records.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Bottling and packaging records. 19.599 Section 19.599 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL DISTILLED SPIRITS PLANTS Records and Reports...

  10. 27 CFR 10.603 - Liquor bottle records.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Liquor bottle records. 10.603 Section 10.603 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Records and Reports Processing Records §...

  11. 27 CFR 19.599 - Bottling and packaging records.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Bottling and packaging records. 19.599 Section 19.599 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL DISTILLED SPIRITS PLANTS Records and Reports...

  12. 27 CFR 19.357 - Completion of bottling.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Completion of bottling. 19.357 Section 19.357 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Processing of Distilled Spirits Rules...

  13. 27 CFR 19.383 - Bottling tank gauge.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottling tank gauge. 19.383 Section 19.383 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Processing Operations Other Than Denaturation...

  14. 27 CFR 19.364 - Bottled-in-bond spirits.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Bottled-in-bond spirits. 19.364 Section 19.364 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL DISTILLED SPIRITS PLANTS Processing of Distilled Spirits Rules...

  15. 27 CFR 19.603 - Liquor bottle records.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Liquor bottle records. 19.603 Section 19.603 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL DISTILLED SPIRITS PLANTS Records and Reports Processing Records §...

  16. 27 CFR 19.603 - Liquor bottle records.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Liquor bottle records. 19.603 Section 19.603 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL DISTILLED SPIRITS PLANTS Records and Reports Processing Records §...

  17. 27 CFR 19.364 - Bottled-in-bond spirits.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Bottled-in-bond spirits. 19.364 Section 19.364 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Processing of Distilled Spirits Rules...

  18. 27 CFR 19.599 - Bottling and packaging records.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Bottling and packaging records. 19.599 Section 19.599 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Records and Reports...

  19. 27 CFR 19.353 - Bottling tank gauge.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Bottling tank gauge. 19.353 Section 19.353 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL DISTILLED SPIRITS PLANTS Processing of Distilled Spirits Rules...

  20. 27 CFR 19.357 - Completion of bottling.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Completion of bottling. 19.357 Section 19.357 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL DISTILLED SPIRITS PLANTS Processing of Distilled Spirits Rules...

  1. 27 CFR 19.353 - Bottling tank gauge.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Bottling tank gauge. 19.353 Section 19.353 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Processing of Distilled Spirits Rules...

  2. 27 CFR 19.603 - Liquor bottle records.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Liquor bottle records. 19.603 Section 19.603 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Records and Reports Processing Records §...

  3. 27 CFR 19.357 - Completion of bottling.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Completion of bottling. 19.357 Section 19.357 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL DISTILLED SPIRITS PLANTS Processing of Distilled Spirits Rules...

  4. 27 CFR 19.357 - Completion of bottling.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Completion of bottling. 19.357 Section 19.357 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Processing of Distilled Spirits Rules...

  5. 27 CFR 19.599 - Bottling and packaging records.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Bottling and packaging records. 19.599 Section 19.599 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Records and Reports...

  6. 27 CFR 19.364 - Bottled-in-bond spirits.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Bottled-in-bond spirits. 19.364 Section 19.364 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Processing of Distilled Spirits Rules...

  7. 27 CFR 19.353 - Bottling tank gauge.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Bottling tank gauge. 19.353 Section 19.353 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Processing of Distilled Spirits Rules...

  8. 40 CFR 141.101 - Use of bottled water.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 23 2014-07-01 2014-07-01 false Use of bottled water. 141.101 Section 141.101 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Use of Non-Centralized Treatment Devices §...

  9. 40 CFR 141.101 - Use of bottled water.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 24 2013-07-01 2013-07-01 false Use of bottled water. 141.101 Section 141.101 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Use of Non-Centralized Treatment Devices §...

  10. 40 CFR 141.101 - Use of bottled water.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Use of bottled water. 141.101 Section 141.101 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Use of Non-Centralized Treatment Devices §...

  11. 40 CFR 141.101 - Use of bottled water.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Use of bottled water. 141.101 Section 141.101 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Use of Non-Centralized Treatment Devices §...

  12. 27 CFR 5.41 - Bottle cartons, booklets and leaflets.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Bottle cartons, booklets and leaflets. 5.41 Section 5.41 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS LABELING AND ADVERTISING OF DISTILLED SPIRITS...

  13. 27 CFR 5.41 - Bottle cartons, booklets and leaflets.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottle cartons, booklets and leaflets. 5.41 Section 5.41 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS LABELING AND ADVERTISING OF DISTILLED SPIRITS...

  14. 27 CFR 5.41 - Bottle cartons, booklets and leaflets.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Bottle cartons, booklets and leaflets. 5.41 Section 5.41 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS LABELING AND ADVERTISING OF DISTILLED SPIRITS...

  15. 27 CFR 5.41 - Bottle cartons, booklets and leaflets.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Bottle cartons, booklets and leaflets. 5.41 Section 5.41 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL LABELING AND ADVERTISING OF DISTILLED SPIRITS...

  16. 27 CFR 5.46 - Standard liquor bottles.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Standard liquor bottles. 5.46 Section 5.46 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL LABELING AND ADVERTISING OF DISTILLED SPIRITS Standards of Fill...

  17. 27 CFR 5.41 - Bottle cartons, booklets and leaflets.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Bottle cartons, booklets and leaflets. 5.41 Section 5.41 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL LABELING AND ADVERTISING OF DISTILLED SPIRITS...

  18. 27 CFR 5.46 - Standard liquor bottles.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Standard liquor bottles. 5.46 Section 5.46 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL LABELING AND ADVERTISING OF DISTILLED SPIRITS Standards of Fill...

  19. 27 CFR 5.46 - Standard liquor bottles.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Standard liquor bottles. 5.46 Section 5.46 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS LABELING AND ADVERTISING OF DISTILLED SPIRITS Standards of Fill...

  20. The extended Kalman filter for forecast of algal bloom dynamics.

    PubMed

    Mao, J Q; Lee, Joseph H W; Choi, K W

    2009-09-01

    A deterministic ecosystem model is combined with an extended Kalman filter (EKF) to produce short term forecasts of algal bloom and dissolved oxygen dynamics in a marine fish culture zone (FCZ). The weakly flushed FCZ is modelled as a well-mixed system; the tidal exchange with the outer bay is lumped into a flushing rate that is numerically determined from a three-dimensional hydrodynamic model. The ecosystem model incorporates phytoplankton growth kinetics, nutrient uptake, photosynthetic production, nutrient sources from organic fish farm loads, and nutrient exchange with a sediment bed layer. High frequency field observations of chlorophyll, dissolved oxygen (DO) and hydro-meteorological parameters (sampling interval Deltat=1 day, 2h, 1h, respectively) and bi-weekly nutrient data are assimilated into the model to produce the combined state estimate accounting for the uncertainties. In addition to the water quality state variables, the EKF incorporates dynamic estimation of algal growth rate and settling velocity. The effectiveness of the EKF data assimilation is studied for a wide range of sampling intervals and prediction lead-times. The chlorophyll and dissolved oxygen estimated by the EKF are compared with field data of seven algal bloom events observed at Lamma Island, Hong Kong. The results show that the EKF estimate well captures the nonlinear error evolution in time; the chlorophyll level can be satisfactorily predicted by the filtered model estimate with a mean absolute error of around 1-2 microg/L. Predictions with 1-2 day lead-time are highly correlated with the observations (r=0.7-0.9); the correlation stays at a high level for a lead-time of 3 days (r=0.6-0.7). Estimated algal growth and settling rates are in accord with field observations; the more frequent DO data can compensate for less frequent algal biomass measurements. The present study is the first time the EKF is successfully applied to forecast an entire algal bloom cycle, suggesting the

  1. A New Bottle Design Decreases Hypoxemic Episodes during Feeding in Preterm Infants.

    PubMed

    Jenik, Alejandro; Fustiñana, Carlos; Marquez, Maritza; Mage, David; Fernandez, Gloria; Mariani, Gonzalo

    2012-01-01

    Oxygen saturation is lower during bottle feeding than during breastfeeding in preterm infants. Our objective was to compare two different bottle systems in healthy preterm infants before discharge in terms of SpO(2) and oral feeding efficiency (rate of milk intake). Infants without supplement oxygen needs were evaluated twice on the same day during two consecutive feeds, by the same nurse. Infants served as their own controls for comparison of two systems of bottles, the order of which was randomized. The new bottle's nipple design mimics mom's breast in shape and feel, and the bottle vents to air when the child sucks on the nipple. The other system was the hospital's standard plastic bottle with silicone nipple. The rate of milk intake was calculated as the total volume transferred minus volume lost divided by time of feeding, mL/min. Thirty-four infants (BW: 1, 163 ± 479.1 g) were studied at 35.4 ± 1.3 weeks after-conception. SpO(2) was significantly higher in infants fed with the new bottle design. Milk intake rate was significantly higher with the new bottle than with the standard bottle design. The new bottle design improves oral feeding performance in preterm infants near to discharge when compared to that of a standard bottle.

  2. [Bursting risk of capped PET bottles with leftover contents caused by yeast growth].

    PubMed

    Oda, Takahiro; Furuta, Munenori; Inamasu, Takeo

    2006-10-01

    Accidents caused by the bursting of capped PET bottles with leftover contents have increased in Japan. Therefore, the bursting risk of capped PET bottles with leftover contents was investigated. The ratios of distension, after 10 days at 25 degrees C, of capped PET bottles with leftover orange juice were approx. 70% in the case of drinking while eating Kimuchi, and approx. 6% in the case of drinking but not eating. Among 58 distended bottles, none burst spontaneously, but 4 bottles (6.9%) burst upon physical shock (dropping onto a concrete floor from 1.5 m height). The greatest distensions of capped PET bottles were observed with leftover orange juice, apple juice and soured milk after 10 days at 25 degrees C. No distensions were observed in bottles containing leftover sports drink and green tea under the same conditions. Identified organisms from distended bottles were almost all Candida spp. When those Candida spp. strains were inoculated individually into PET bottles half full of orange, apple or sour milk, all bottles were distended after 7 days at 25 degrees C. From the above results, it appears that there is a risk that capped PET bottles with leftover contents, especially sour fruit juice or soured milk, may burst owing to high gas pressure caused by yeast growth during storage at room temperature for over 1 week.

  3. A New Bottle Design Decreases Hypoxemic Episodes during Feeding in Preterm Infants

    PubMed Central

    Jenik, Alejandro; Fustiñana, Carlos; Marquez, Maritza; Mage, David; Fernandez, Gloria; Mariani, Gonzalo

    2012-01-01

    Oxygen saturation is lower during bottle feeding than during breastfeeding in preterm infants. Our objective was to compare two different bottle systems in healthy preterm infants before discharge in terms of SpO2 and oral feeding efficiency (rate of milk intake). Infants without supplement oxygen needs were evaluated twice on the same day during two consecutive feeds, by the same nurse. Infants served as their own controls for comparison of two systems of bottles, the order of which was randomized. The new bottle's nipple design mimics mom's breast in shape and feel, and the bottle vents to air when the child sucks on the nipple. The other system was the hospital's standard plastic bottle with silicone nipple. The rate of milk intake was calculated as the total volume transferred minus volume lost divided by time of feeding, mL/min. Thirty-four infants (BW: 1, 163 ± 479.1 g) were studied at 35.4 ± 1.3 weeks after-conception. SpO2 was significantly higher in infants fed with the new bottle design. Milk intake rate was significantly higher with the new bottle than with the standard bottle design. The new bottle design improves oral feeding performance in preterm infants near to discharge when compared to that of a standard bottle. PMID:22778757

  4. Chemical contamination of soft drinks in sealed plastic bottles by environmental stress cracking.

    PubMed

    Muller, Dan; Israelsohn-Azulay, Osnat

    2009-01-01

    A contamination of soft drinks in sealed bottles by organic solvents is reported: closed bottles full of soft drinks were accidentally placed on a cardboard soaked with thinner and the organic fluid subsequently fissured the bottom of the bottles and penetrated into the soft drinks without any apparent leakage of the soft drinks. Experiments were carried out to simulate the process: the penetration of different organic solvents into soft drinks through the bottom of closed bottles was tested. The penetration occurred only when the closed bottles contained carbonated soft drinks (CSD), indicating that inner pressure is a necessary condition for the fissuring of the bottles. This paper discusses environmental stress cracking of polyethylene terephthalate (PET) bottles by organic solvents and migration of chemicals to CSD. Experiments were conducted to determine the conditions in which PET can be permeable to poisoning organic products.

  5. Beach-goer behavior during a retrospectively detected algal ...

    EPA Pesticide Factsheets

    Algal blooms occur among nutrient rich, warm surface waters and may adversely impact recreational beaches. During July – September 2003, a prospective study of beachgoers was conducted on weekends at a public beach on a Great Lake in the United States. We measured each beachgoer’s activity at the start and end of their beach visit and the environmental factors: water and air temperature, wind speed and wave height at the study site each day. At the time, there was no notification of algal blooms; we retrospectively evaluated the presence of algal blooms using MERIS data from the Envisat-1 satellite. A total of 2840 people participated in the study over 16 study days. The majority (55%) were female, and 751 (26%) were < 18 years of age. An algal bloom was detected retrospectively by remotely sensed satellite imagery during August 16 – 24. This peak bloom period (PB) included 4 study days. During PB study days, more study participants 226/742 (31%) reported body contact with the water compared to contact 531/2098 (25%) on non-peak days. During the 4 PB days, of the environmental factors, only mean water temperature was significantly different, 250 C vs. 230 C (p<0.05) from other days.These results suggest that beachgoer body contact with water was not deterred by the presence of an algal bloom, and that interventions to actively discourage water contact during a bloom are needed to reduce exposure to blooms. This is an abstract of a proposed presentation and

  6. Acetic acid bacteria spoilage of bottled red wine -- a review.

    PubMed

    Bartowsky, Eveline J; Henschke, Paul A

    2008-06-30

    Acetic acid bacteria (AAB) are ubiquitous organisms that are well adapted to sugar and ethanol rich environments. This family of Gram-positive bacteria are well known for their ability to produce acetic acid, the main constituent in vinegar. The oxidation of ethanol through acetaldehyde to acetic acid is well understood and characterised. AAB form part of the complex natural microbial flora of grapes and wine, however their presence is less desirable than the lactic acid bacteria and yeast. Even though AAB were described by Pasteur in the 1850s, wine associated AAB are still difficult to cultivate on artificial laboratory media and until more recently, their taxonomy has not been well characterised. Wine is at most risk of spoilage during production and the presence of these strictly aerobic bacteria in grape must and during wine maturation can be controlled by eliminating, or at least limiting oxygen, an essential growth factor. However, a new risk, spoilage of wine by AAB after packaging, has only recently been reported. As wine is not always sterile filtered prior to bottling, especially red wine, it often has a small resident bacterial population (<10(3) cfu/mL), which under conducive conditions might proliferate. Bottled red wines, sealed with natural cork closures, and stored in a vertical upright position may develop spoilage by acetic acid bacteria. This spoilage is evident as a distinct deposit of bacterial biofilm in the neck of the bottle at the interface of the wine and the headspace of air, and is accompanied with vinegar, sherry, bruised apple, nutty, and solvent like off-aromas, depending on the degree of spoilage. This review focuses on the wine associated AAB species, the aroma and flavour changes in wine due to AAB metabolism, discusses the importance of oxygen ingress into the bottle and presents a hypothesis for the mechanism of spoilage of bottled red wine.

  7. Wine bottle colour and oxidative spoilage: whole bottle light exposure experiments under controlled and uncontrolled temperature conditions.

    PubMed

    Dias, Daniel A; Clark, Andrew C; Smith, Trevor A; Ghiggino, Kenneth P; Scollary, Geoffrey R

    2013-06-15

    Exposure of a Chardonnay wine to light from a mercury vapour lamp under controlled temperature conditions showed that colour enhancement was dependent on bottle colour. The increase in colouration was Antique Greenbottle type. Xanthylium pigments were identified as one component contributing to the observed enhancement of colour. The presence of oxygen was shown to be a critical factor to initiate the formation of these xanthylium pigments during light exposure. Without temperature control, wine colour development was highest in Antique Green and lowest in Flint. This alternate order reflects the ability of the darker bottles to retain heat longer than lighter coloured ones as confirmed by surface temperature decay rates. Specific pigments contributing to the wine colour enhancement in uncontrolled temperature/light exposure experiments could not be identified, although tentative evidence was obtained for the presence of flavan-3-ol based compounds. The different bottle glass surfaces did not influence the rate of loss of dissolved oxygen or oxidation of ascorbic acid. The potential to develop the results obtained in this study to identify markers for light and/or temperature exposure of white wines is discussed.

  8. Evaluation function of drinking ease from aluminum beverage bottles relative to optimum bottle opening diameter and beverage type.

    PubMed

    Chihara, Takanori; Yamazaki, Koetsu

    2012-01-01

    In recent years, aluminum beverage bottles having screw tops with opening diameters of 28 and 38 mm have been launched in the Japanese market in keeping with the modern-day drinking habits of consumers. Although Japanese consumers are familiar with such bottles, a majority of them feel that the 28 mm opening is too small and the 38 mm opening is too large. Therefore, we felt the need to develop a method for evaluating consumer feelings when they drink a beverage directly from the bottle opening. For this purpose, we propose an evaluation function of drinking ease that calculates the optimum opening diameter of the bottle. From results of our previous study, we know that there exists an ideal volume of beverage flowing into the mouth, at which consumers feel most comfortable while drinking directly from bottles. Therefore, we define the evaluation function of drinking ease in terms of the difference between the actual volume of fluid in the mouth and the expected ideal volume. If this difference is small, consumers probably feel comfortable while drinking the beverage. We consider a design variable, i.e., the opening diameter, and two state variables, i.e., the volume of beverage remaining in the bottle and the height of consumers, and construct the response surface of the evaluation function by using radial basis function networks. In addition, for investigating the influence of beverage type on the evaluation function, we select green tea and a carbonated beverage (Coke) as test beverages. Results of optimization of the proposed function show that when the opening diameters are 35.4 mm and 34.4 mm in the case of green tea and Coke, respectively, the actual volume of fluid in the mouth is closest to the ideal volume and the participants feel most comfortable. These results are in agreement with results of our previous study that an opening diameter of 33 mm is optimum for young Japanese adults. Thus, we confirm that the proposed function is accurate; it can be used

  9. Distribution, behavior, and condition of herbivorous fishes on coral reefs track algal resources.

    PubMed

    Tootell, Jesse S; Steele, Mark A

    2016-05-01

    Herbivore distribution can impact community structure and ecosystem function. On coral reefs, herbivores are thought to play an important role in promoting coral dominance, but how they are distributed relative to algae is not well known. Here, we evaluated whether the distribution, behavior, and condition of herbivorous fishes correlated with algal resource availability at six sites in the back reef environment of Moorea, French Polynesia. Specifically, we tested the hypotheses that increased algal turf availability would coincide with (1) increased biomass, (2) altered foraging behavior, and (3) increased energy reserves of herbivorous fishes. Fish biomass and algal cover were visually estimated along underwater transects; behavior of herbivorous fishes was quantified by observations of focal individuals; fish were collected to assess their condition; and algal turf production rates were measured on standardized tiles. The best predictor of herbivorous fish biomass was algal turf production, with fish biomass increasing with algal production. Biomass of herbivorous fishes was also negatively related to sea urchin density, suggesting competition for limited resources. Regression models including both algal turf production and urchin density explained 94 % of the variation in herbivorous fish biomass among sites spread over ~20 km. Behavioral observations of the parrotfish Chlorurus sordidus revealed that foraging area increased as algal turf cover decreased. Additionally, energy reserves increased with algal turf production, but declined with herbivorous fish density, implying that algal turf is a limited resource for this species. Our findings support the hypothesis that herbivorous fishes can spatially track algal resources on coral reefs.

  10. Recycling algae to improve species control and harvest efficiency from a high rate algal pond.

    PubMed

    Park, J B K; Craggs, R J; Shilton, A N

    2011-12-15

    This paper investigates the influence of recycling gravity harvested algae on species dominance and harvest efficiency in wastewater treatment High Rate Algal Ponds (HRAP). Two identical pilot-scale HRAPs were operated over one year either with (HRAP(r)) or without (HRAP(c)) harvested algal biomass recycling. Algae were harvested from the HRAP effluent in algal settling cones (ASCs) and harvest efficiency was compared to settlability in Imhoff cones five times a week. A microscopic image analysis technique was developed to determine relative algal dominance based on biovolume and was conducted once a month. Recycling of harvested algal biomass back to the HRAP(r) maintained the dominance of a single readily settleable algal species (Pediastrum sp.) at >90% over one year (compared to the control with only 53%). Increased dominance of Pediastrum sp. greatly improved the efficiency of algal harvest (annual average of >85% harvest for the HRAP(r) compared with ∼60% for the control). Imhoff cone experiments demonstrated that algal settleability was influenced by both the dominance of Pediastrum sp. and the species composition of remaining algae. Algal biomass recycling increased the average size of Pediastrum sp. colonies by 13-30% by increasing mean cell residence time. These results indicate that recycling gravity harvested algae could be a simple and effective operational strategy to maintain the dominance of readily settleable algal species, and enhance algal harvest by gravity sedimentation.

  11. Fermentation of de-oiled algal biomass by Lactobacillus casei for production of lactic acid.

    PubMed

    Overbeck, Tom; Steele, James L; Broadbent, Jeff R

    2016-12-01

    De-oiled algal biomass (algal cake) generated as waste byproduct during algal biodiesel production is a promising fermentable substrate for co-production of value-added chemicals in biorefinery systems. We explored the ability of Lactobacillus casei 12A to ferment algal cake for co-production of lactic acid. Carbohydrate and amino acid availability were determined to be limiting nutritional requirements for growth and lactic acid production by L. casei. These nutritional requirements were effectively addressed through enzymatic hydrolysis of the algal cake material using α-amylase, cellulase (endo-1,4-β-D-glucanase), and pepsin. Results confirm fermentation of algal cake for production of value-added chemicals is a promising avenue for increasing the overall cost competiveness of the algal biodiesel production process.

  12. Effects of green algal mats on bivalves in a New England mud flat

    NASA Astrophysics Data System (ADS)

    Thiel, M.; Stearns, L. M.; Watling, L.

    1998-03-01

    Concurrent with the spread of green algal mats on tidal flats, reports of macrofauna dieoffs under dense algal mats have increased in numbers. Bivalves seem to be particularly affected by persistent dense algal mats. Bivalve species with a long extendible siphon seem to be less affected underneath algal mats, but no distinction has been made in the past between species with short and those with long siphons, Mya arenaria and Macoma balthica, on an intertidal mudflat in New England. Abundances of M. arenaria declined substantially during the study period when a thick green algal mat covered the mudflat for several months. Numbers of the small bivalve Gemma gemma also decreased substantially, whereas abundances of M. balthica showed minimal variation during the time of algal coverage. In algae removal/addition experiments numbers of M. arenaria decreased, but effects were only significant in an algal addition to previously algal-free mudflat areas. Abundance of M. balthica did not change significantly in the algal removal/additition experiments. Over the time period of the experiment (9 weeks), M. arenaria showed measurable size increase in uncovered mudflat areas, but not underneath algal mats. Similarly, M. balthica only increased in size in the uncovered mudflat area. From these results it is concluded that M. balthica can survive time periods of dense algal coverage because it is able to penetrate through the algal mat with its long extendible siphon, and thus can reach well-oxygenated water layers above the mat. M. arenaria with its thick, less extendible, siphon cannot push through dense algal mats and therefore is more likely to die underneath persistent algal mats.

  13. Increased migration levels of bisphenol A from polycarbonate baby bottles after dishwashing, boiling and brushing.

    PubMed

    Brede, C; Fjeldal, P; Skjevrak, I; Herikstad, H

    2003-07-01

    Baby bottles are often made of polycarbonate plastic. Impurities remaining in the bottle from the monomer bisphenol A can migrate from the plastic bottles into baby food, thereby causing a health concern. Previous migration testing of new baby bottles showed only trace migration levels of the substance. In the present work, polycarbonate baby bottles were subjected to simulated use by dishwashing, boiling and brushing. Migration testing performed with both new and used bottles revealed a significant increase in migration of bisphenol A due to use. This finding might be explained by polymer degradation. Bisphenol A was determined in 200-ml samples of water food simulant by a method based on solid-phase extraction followed by gas chromatography coupled with mass spectrometry. The detection limit was 0.1 microg l(-1). Twelve different polycarbonate baby bottles were tested by filling them with hot water (100 degrees C) for 1 h. The mean bisphenol A level from new bottles was 0.23 + -0.12 microg l(-1), while the mean levels from bottles subjected to simulated use were 8.4 + -4 microg l(-1) (dishwashed 51 times) and 6.7 + -4 microg l(-1) (dishwashed 169 times), respectively. None of the bottles released bisphenol A at levels that exceed the recently established provisional tolerable daily intake (0.01 mg kg(-1) body weight/day) in the European Union.

  14. Plutonium solution storage in plastic bottles: Operational experience and safety issues

    SciTech Connect

    Conner, W.V.

    1995-03-15

    Computer spread sheet models were developed to gain a better understanding of the factors that lead to pressurization and failure of plastic bottles containing plutonium solutions. These models were developed using data obtained from the literature on gas generation rates for plutonium solutions. Leak rates from sealed plastic bottles were obtained from bottle leak tests conducted at Rocky Flats. Results from these bottle leak tests showed that narrow mouth four liter bottles will seal much better than wide mouth four liter bottles. The gas generation rate and leak rate data were used to develop models for predicting the rate of pressurization and maximum pressures expected in sealed bottles of plutonium solution containing various plutonium and acid concentrations. The computer models were used to develop proposed time limits for storing or transporting plutonium solutions in sealed plastic bottles. For plutonium solutions containing < 1.5 g/l, maximum safe storage times from 4 weeks to 12 months are proposed. The maximum safe storage times vary depending upon the plutonium concentration in the solution. Low concentration plutonium solutions can be stored safely for longer periods of time than high concentration plutonium solutions. For solutions containing > 1.5 g/l plutonium, storage in sealed bottles should not be allowed. However, transportation of higher concentration plutonium solution in sealed bottles is required, and safe transportation times of 1 shift to 6 days are proposed.

  15. Bottle Characteristics of Topical International Glaucoma Medications versus Local Brands in Saudi Arabia

    PubMed Central

    Al-Jumaian, Nasser; Malik, Rizwan; Khandekar, Rajiv; Al-Humaidan, Abdullah; Al-Madany, Rana; Al-Qahtani, Reham; Altowairqi, Ahmed; Al-Theeb, Abdulwahab; Zaman, Babar; Al-Djasim, Leyla; Craven, E. Randy; Edward, Deepak P.

    2016-01-01

    WHAT IS KNOWN AND OBJECTIVE: Physical bottle characteristics differ of brand name topical glaucoma medications and local generic equivalents. This study compares the bottle characteristics of international topical glaucoma brands versus local brands from the Kingdom of Saudi Arabia. METHODS: Data were collected on bottle drum volume, drop volume, bottle squeezability, bottle tip diameter, labels and instructions, cap color coding, and clarity of the drug label. Density-based calculations of drops in bottle volume were assessed using an analytic balance. Bottle tip diameter was measured using 0.05 mm Vernier calipers. A Likert scale-based questionnaire was used to evaluate the subjective opinions of patients on bottle squeezability, clarity of usage and storage instructions, and the consistency of the cap color coding. RESULTS: The volumes of international brands were statistically significantly higher than the local brands (P < 0.001). A number of drops per bottle and tip diameter were comparable between the international local brands. Cap color coding was inconsistent for international and local brands. Patients were dissatisfied with the label font size. Patients reported that the international and local brands were similar in terms of the ease of opening the bottle, instilling a drop, and the clarity of the instructions; but the local brands were subjectively easier to squeeze than international brands. WHAT IS NEW AND CONCLUSIONS: This is the first study to compare bottle characteristics of local Saudi Arabia brands with international brands. The bottle characteristics and patient feedback were similar between the local and international topical glaucoma medications. However, there were differences between the local and international brands in drug volume, bottle squeezability. Hence, patient compliance and drop dosage may differ based on the origin of manufacture. PMID:27994392

  16. [Not only bottles. Glass baby's bottles in between the second half of XIXth century and the first decades of the XXth].

    PubMed

    Sartori, Ezio

    2002-01-01

    Mother's milk is the best food for the baby. The need to use foods other than mother's milk has always represented a challenging problem to be solved. The author warns that the high mortality during the first year of life during the early years of the XXth century (20%) peaked at an amazing 80% in children artificially fed at orphanages. In the considered years, the usage of baby's bottle spread among babies that could not be fed by mothers or wet-nurses. The idea of rubber teat 1845 and of automatic devices for the production of glass bottle - 1903 - contributed to the diffusion of the baby's bottle. First baby's bottles were variously shaped. However, the finding of severe gastroenteritis caused by a long rubber tube attached to the rubber teat (the so-called death-bottle), together with the necessity of a careful cleaning and the diffusion of Soxhket's system (sterilization of many bottles in the same container) will lead to the choice of large mouthed cylindrical bottles, very similar to the plastic bottles used nowadays.

  17. Among-habitat algal selectivity by browsing herbivores on an inshore coral reef

    NASA Astrophysics Data System (ADS)

    Loffler, Zoe; Bellwood, David R.; Hoey, Andrew S.

    2015-06-01

    Understanding how the impact of different herbivores varies spatially on coral reefs is important in qualifying the resistance of coral reefs to disturbance events and identifying the processes that structure algal communities. We used assays of six common macroalgae ( Acanthophora spicifera, Caulerpa taxifolia, Galaxaura rugosa, Laurencia sp. Sargassum sp., and Turbinaria ornata) and remote underwater video cameras to quantify herbivory in two habitats (reef crest and slope) across multiple sites on Orpheus Island, Great Barrier Reef. Rates of herbivory varied among macroalgal taxa, habitats, and sites. Reductions in algal biomass were greatest for Sargassum sp. (36 % 4 h-1), intermediate for A. spicifera, Laurencia sp., C. taxifolia, and T. ornata (17-33 % 4 h-1) and lowest for G. rugosa (6 % 4 h-1). Overall, rates of herbivory were generally greater on the reef crest (30 % 4 h-1) than the reef slope (21 % 4 h-1). This difference in rates of herbivory coincided with a marked shift in the dominant herbivores between habitats. Kyphosus vaigiensis, despite only feeding on three species of macroalgae ( Sargassum sp., T. ornata, and A. spicifera), was responsible for 34 % of all bites recorded on the reef crest yet did not take a single bite from algae on the reef slope. In contrast, Siganus doliatus took bites on every species of algae in both habitats, accounting for 40 % of bites on the reef crest and 74 % of all bites recorded on the reef slope. This difference in the number of macroalgal species targeted by herbivores and the habitat/s in which they feed adds another dimension of complexity to our understanding of coral reef herbivore dynamics.

  18. A Taste of Algal Genomes from the Joint Genome Institute

    SciTech Connect

    Kuo, Alan; Grigoriev, Igor

    2012-06-17

    Algae play profound roles in aquatic food chains and the carbon cycle, can impose health and economic costs through toxic blooms, provide models for the study of symbiosis, photosynthesis, and eukaryotic evolution, and are candidate sources for bio-fuels; all of these research areas are part of the mission of DOE's Joint Genome Institute (JGI). To date JGI has sequenced, assembled, annotated, and released to the public the genomes of 18 species and strains of algae, sampling almost all of the major clades of photosynthetic eukaryotes. With more algal genomes currently undergoing analysis, JGI continues its commitment to driving forward basic and applied algal science. Among these ongoing projects are the pan-genome of the dominant coccolithophore Emiliania huxleyi, the interrelationships between the 4 genomes in the nucleomorph-containing Bigelowiella natans and Guillardia theta, and the search for symbiosis genes of lichens.

  19. Didymosphenia geminata: Algal blooms in oligotrophic streams and rivers

    NASA Astrophysics Data System (ADS)

    Sundareshwar, P. V.; Upadhayay, S.; Abessa, M.; Honomichl, S.; Berdanier, B.; Spaulding, S. A.; Sandvik, C.; Trennepohl, A.

    2011-05-01

    In recent decades, the diatom Didymosphenia geminata has emerged as nuisance species in river systems around the world. This periphytic alga forms large “blooms” in temperate streams, presenting a counterintuitive result: the blooms occur primarily in oligotrophic streams and rivers, where phosphorus (P) availability typically limits primary production. The goal of this study is to examine how high algal biomass is formed under low P conditions. We reveal a biogeochemical process by which D. geminata mats concentrate P from flowing waters. First, the mucopolysaccaride stalks of D. geminata adsorb both iron (Fe) and P. Second, enzymatic and bacterial processes interact with Fe to increase the biological availability of P. We propose that a positive feedback between total stalk biomass and high growth rate is created, which results in abundant P for cell division. The affinity of stalks for Fe in association with iron-phosphorus biogeochemistry suggest a resolution to the paradox of algal blooms in oliogotrophic streams and rivers.

  20. Unraveling algal lipid metabolism: Recent advances in gene identification.

    PubMed

    Khozin-Goldberg, Inna; Cohen, Zvi

    2011-01-01

    Microalgae are now the focus of intensive research due to their potential as a renewable feedstock for biodiesel. This research requires a thorough understanding of the biochemistry and genetics of these organisms' lipid-biosynthesis pathways. Genes encoding lipid-biosynthesis enzymes can now be identified in the genomes of various eukaryotic microalgae. However, an examination of the predicted proteins at the biochemical and molecular levels is mandatory to verify their function. The essential molecular and genetic tools are now available for a comprehensive characterization of genes coding for enzymes of the lipid-biosynthesis pathways in some algal species. This review mainly summarizes the novel information emerging from recently obtained algal gene identification.

  1. Algal Lipid Extraction and Upgrading to Hydrocarbons Technology Pathway

    SciTech Connect

    Davis, Ryan; Biddy, Mary J.; Jones, Susanne B.

    2013-03-31

    In support of the Bioenergy Technologies Office, the National Renewable Energy Laboratory (NREL) and the Pacific Northwest National Laboratory (PNNL) are undertaking studies of biomass conversion technologies to identify barriers and target research toward reducing conversion costs. Process designs and preliminary economic estimates for each of these pathway cases were developed using rigorous modeling tools (Aspen Plus and Chemcad). These analyses incorporated the best information available at the time of development, including data from recent pilot and bench-scale demonstrations, collaborative industrial and academic partners, and published literature and patents. This technology pathway case investigates the cultivation of algal biomass followed by further lipid extraction and upgrading to hydrocarbon biofuels. Technical barriers and key research needs have been assessed in order for the algal lipid extraction and upgrading pathway to be competitive with petroleum-derived gasoline, diesel and jet range hydrocarbon blendstocks.

  2. Seismic Exploration for Pennsylvanian Algal Mounds, Paradox Basin

    SciTech Connect

    Moriarty, B.; Grundy, R.

    1985-05-01

    During the past 2 years, several new field discoveries were drilled in Pennsylvanian algal mounds of the Paradox basin. Most of these discoveries were based, at least partially, on state-of-the-art seismic data. New field production comes from either the Ismay or Desert Creek zones the Paradox Formation. The algal correlate laterally with either marine shelf or penesaline facies. Detection of the Ismay and Desert Creek buildups is difficult because of their limited thickness. Therefore, the acquisition of good signal-to-noise high-frequency data and stratigraphic processing for frequency enhancement are both critical for successful seismic exploration in the Paradox basin. Bug, Patterson, Ismay, Cache, and Rockwell Springs fields are characteristic of Desert Creek and Ismay stratigraphic trapping.

  3. Hybrid life-cycle assessment of algal biofuel production.

    PubMed

    Malik, Arunima; Lenzen, Manfred; Ralph, Peter J; Tamburic, Bojan

    2015-05-01

    The objective of this work is to establish whether algal bio-crude production is environmentally, economically and socially sustainable. To this end, an economic multi-regional input-output model of Australia was complemented with engineering process data on algal bio-crude production. This model was used to undertake hybrid life-cycle assessment for measuring the direct, as well as indirect impacts of producing bio-crude. Overall, the supply chain of bio-crude is more sustainable than that of conventional crude oil. The results indicate that producing 1 million tonnes of bio-crude will generate almost 13,000 new jobs and 4 billion dollars' worth of economic stimulus. Furthermore, bio-crude production will offer carbon sequestration opportunities as the production process is net carbon-negative.

  4. Export of algal biomass from the melting Arctic sea ice.

    PubMed

    Boetius, Antje; Albrecht, Sebastian; Bakker, Karel; Bienhold, Christina; Felden, Janine; Fernández-Méndez, Mar; Hendricks, Stefan; Katlein, Christian; Lalande, Catherine; Krumpen, Thomas; Nicolaus, Marcel; Peeken, Ilka; Rabe, Benjamin; Rogacheva, Antonina; Rybakova, Elena; Somavilla, Raquel; Wenzhöfer, Frank

    2013-03-22

    In the Arctic, under-ice primary production is limited to summer months and is restricted not only by ice thickness and snow cover but also by the stratification of the water column, which constrains nutrient supply for algal growth. Research Vessel Polarstern visited the ice-covered eastern-central basins between 82° to 89°N and 30° to 130°E in summer 2012, when Arctic sea ice declined to a record minimum. During this cruise, we observed a widespread deposition of ice algal biomass of on average 9 grams of carbon per square meter to the deep-sea floor of the central Arctic basins. Data from this cruise will contribute to assessing the effect of current climate change on Arctic productivity, biodiversity, and ecological function.

  5. Algal polycultures enhance coproduct recycling from hydrothermal liquefaction.

    PubMed

    Godwin, Casey M; Hietala, David C; Lashaway, Aubrey R; Narwani, Anita; Savage, Phillip E; Cardinale, Bradley J

    2017-01-01

    The aim of this study was to determine if polycultures of algae could enhance tolerance to aqueous-phase coproduct (ACP) from hydrothermal liquefaction (HTL) of algal biomass to produce biocrude. The growth of algal monocultures and polycultures was characterized across a range ACP concentrations and sources. All of the monocultures were either killed or inhibited by 2% ACP, but polycultures of the same species were viable at up to 10%. The addition of ACP increased the growth rate (up to 25%) and biomass production (53%) of polycultures, several of which were more productive in ACP than any monoculture was in the presence or absence of ACP. These results suggest that a cultivation process that applies biodiversity to nutrient recycling could produce more algae with less fertilizer consumption.

  6. The paradox of algal blooms in oligotrophic waters

    NASA Astrophysics Data System (ADS)

    Sundareshwar, P. V.; Upadhyay, S.; Abessa, M. B.; Honomichl, S.; Berdanier, B.; Spaulding, S.; Sandvik, C.; Trennepohl, A.

    2010-12-01

    Nutrient inputs to streams and lakes, primarily from anthropogenic sources, lead to eutrophic conditions that favor algal blooms with undesirable consequences. In contrast, low nutrient or oligotrophic waters rarely support algal blooms; such ecosystems are typically lower in productivity. Since the mid-1980’s however, the diatom Didymosphenia geminata has dramatically expanded its range colonizing oligotrophic rivers worldwide with blooms appearing as thick benthic mats. This recent global occurrence of Didymosphenia geminata blooms in temperate rivers has been perplexing in its pace of spread and the paradoxical nature of the nuisance growths. The blooms occur primarily in oligotrophic flowing waters, where phosphorus (P) availability often limits primary production. We present a biogeochemical process by which D. geminata mats adsorb both P and iron (Fe) from flowing waters and make P available for cellular uptake. The adsorbed P becomes bioavailable through biogeochemical processes that occur within the mat. The biogeochemical processes observed here while well accepted in benthic systems are novel for algal blooms in lotic habits. Enzymatic and bacterial processes such as Fe and sulfate reduction can release the adsorbed P and increase its bioavailability, creating a positive feedback between total stalk biomass and nutrient availability. Stalk affinity for Fe, Fe-P biogeochemistry, and interaction between watershed processes and climatic setting explain the paradoxical blooms, and the recent global spread of this invasive aquatic species. At a broader scale the study also implies that such algal blooms in oligotrophic environments can fundamentally alter the retention and longitudinal transfer of important nutrients such as P in streams and rivers.

  7. Universal Probe Library based real-time PCR for rapid detection of bacterial pathogens from positive blood culture bottles.

    PubMed

    Zhu, Lingxiang; Shen, Ding-Xia; Zhou, Qiming; Liu, Chao-Jun; Li, Zexia; Fang, Xiangdong; Li, Quan-Zhen

    2014-03-01

    A set of real-time PCR based assays using the locked nucleic acid probes from Roche Universal ProbeLibrary were developed for rapid detection of eight bacterial species from positive blood culture bottles. Four duplex real-time PCR reactions targeting to one Gram-positive bacterium and one Gram-negative bacterium were optimized for species identification according to Gram stain results. We also included mecA-specific primers and probes in the assays to indicate the presence of methicillin resistance in the bacterial species. The analytical sensitivity was in the range of 1-10 CFU per PCR reaction mixture. The specificity and cross reactivity of the assay was validated by 28 ATCC reference strains and 77 negative blood culture specimens. No cross-reactivity was observed in these samples thus demonstrating 100 % specificity. 72 previously characterized clinical isolates were tested by the real-time PCR assay and validated the accuracy and feasibility of the real-time PCR assay. Furthermore, 55 positive blood culture samples were tested using real-time PCR and 50 (90.9 %) of them were identified as the same species as judged by biochemical analysis. In total, real-time PCR showed 98.2 % consistent to that of traditional methods. Real-time PCR can be used as a supplement for early detection of the frequently-occurred pathogens from the positive blood cultures.

  8. [Reliability of % vol. declarations on labels of wine bottles].

    PubMed

    Schütz, Harald; Erdmann, Freidoon; Verhoff, Marcel A; Weiler, Günter

    2005-01-01

    The Council Regulation (EC) no. 1493/1999 of 17 May 1999 on the common organisation of the market in wine (Abl. L 179 dated 14/7/1999) and the GMO Wine 2000 (Annex VII A) stipulates that the labels of wine bottles have to indicate, among others, information on the sales designation of the product, the nominal volume and the alcoholic strength. The latter must not differ by more than 0.5% vol. from the alcoholic strength as established by analysis. Only when quality wines are stored in bottles for more than three years, the accepted tolerance limits are +/- 0.8% vol. The presented investigation results show that deviations have to be taken into account which may be highly relevant for forensic practice.

  9. Stable isotopic composition of bottled mineral waters from Romania

    NASA Astrophysics Data System (ADS)

    Bădăluţă, Carmen; Nagavciuc, Viorica; Perșoiu, Aurel

    2015-04-01

    Romania has a high potential of mineral waters resources, featuring one of the largest mineral resources at European and global level. In the last decade, due to increased in consumption of bottled water, numerous brands have appeared on the market, with equally numerous and variable sources of provenance. In this study we have analyzed the isotopic composition of bottled mineral waters from Romania in order to determine their source and authenticity. We have analysed 32 carbonated and 24 non-carbonated mineral waters from Romania. and the results were analysed in comparison with stable isotope data from precipitation and river waters. Generally, the isotopic values of the mineral waters follow those in precipitation; however, differences occur in former volcanic regions (due to deep circulation of meteoric waters and increased exchange with host rock and volcanic CO2), as well as in mountainous regions, where high-altitude recharge occurs.

  10. Women's experiences of breastfeeding in a bottle-feeding culture.

    PubMed

    Scott, Jane A; Mostyn, Tricia

    2003-08-01

    Focus group interviews were used to explore the breastfeeding attitudes and experiences of a group of low-income Scottish women who were breastfeeding in an environment where bottle-feeding was the cultural norm. The majority of women interviewed had no prior exposure to breastfeeding and received little or no support or advice for breastfeeding from family or friends. All women were participants in a breastfeeding peer-support project, and for most the peer volunteers represented their only source of support and guidance, outside of that provided by health professionals. Women often went to great lengths to avoid having to breastfeed in public, and the majority preferred to breastfeed away from the public gaze. Despite reported increases in breastfeeding rates, bottle-feeding remains the cultural norm in the more deprived areas of Glasgow. Those women who do breastfeed in these areas demonstrate a high level of commitment to breastfeeding that sets them apart from their social peers.

  11. Floating ice-algal aggregates below melting arctic sea ice.

    PubMed

    Assmy, Philipp; Ehn, Jens K; Fernández-Méndez, Mar; Hop, Haakon; Katlein, Christian; Sundfjord, Arild; Bluhm, Katrin; Daase, Malin; Engel, Anja; Fransson, Agneta; Granskog, Mats A; Hudson, Stephen R; Kristiansen, Svein; Nicolaus, Marcel; Peeken, Ilka; Renner, Angelika H H; Spreen, Gunnar; Tatarek, Agnieszka; Wiktor, Jozef

    2013-01-01

    During two consecutive cruises to the Eastern Central Arctic in late summer 2012, we observed floating algal aggregates in the melt-water layer below and between melting ice floes of first-year pack ice. The macroscopic (1-15 cm in diameter) aggregates had a mucous consistency and were dominated by typical ice-associated pennate diatoms embedded within the mucous matrix. Aggregates maintained buoyancy and accumulated just above a strong pycnocline that separated meltwater and seawater layers. We were able, for the first time, to obtain quantitative abundance and biomass estimates of these aggregates. Although their biomass and production on a square metre basis was small compared to ice-algal blooms, the floating ice-algal aggregates supported high levels of biological activity on the scale of the individual aggregate. In addition they constituted a food source for the ice-associated fauna as revealed by pigments indicative of zooplankton grazing, high abundance of naked ciliates, and ice amphipods associated with them. During the Arctic melt season, these floating aggregates likely play an important ecological role in an otherwise impoverished near-surface sea ice environment. Our findings provide important observations and measurements of a unique aggregate-based habitat during the 2012 record sea ice minimum year.

  12. Monthly Ensembles in Algal Bloom Predictions on the Baltic Sea

    NASA Astrophysics Data System (ADS)

    Roiha, Petra; Westerlund, Antti; Stipa, Tapani

    2010-05-01

    In this work we explore the statistical features of monthly ensembles and their capability to predict biogeochemical conditions in the Baltic Sea. Operational marine environmental modelling has been considered hard, and consequently there are very few operational ecological models. Operational modelling of harmful algal blooms is harder still, since it is difficult to separate the algal species in models, and in general, very little is known of HAB properties. We present results of an ensemble approach to HAB forecasting in the Baltic, and discuss the applicability of the forecasting method to biochemical modelling. It turns out that HABs are indeed possible to forecast with useful accuracy. For modelling the algal blooms in Baltic Sea we used FMI operational 3-dimensional biogeochemical model to produce seasonal ensemble forecasts for different physical, chemical and biological variables. The modelled variables were temperature, salinity, velocity, silicate, phosphate, nitrate, diatoms, flagellates and two species of potentially toxic filamentous cyanobacteria nodularia spumigena and aphanizomenon flos-aquae. In this work we concentrate to the latter two. Ensembles were produced by running the biogeochemical model several times and forcing it on every run with different set of seasonal weather parameters from ECMWF's mathematically perturbed ensemble prediction forecasts. The ensembles were then analysed by statistical methods and the median, quartiles, minimum and maximum values were calculated for estimating the probable amounts of algae. Validation for the forecast method was made by comparing the final results against available and valid in-situ HAB data.

  13. Study of cnidarian-algal symbiosis in the "omics" age.

    PubMed

    Meyer, Eli; Weis, Virginia M

    2012-08-01

    The symbiotic associations between cnidarians and dinoflagellate algae (Symbiodinium) support productive and diverse ecosystems in coral reefs. Many aspects of this association, including the mechanistic basis of host-symbiont recognition and metabolic interaction, remain poorly understood. The first completed genome sequence for a symbiotic anthozoan is now available (the coral Acropora digitifera), and extensive expressed sequence tag resources are available for a variety of other symbiotic corals and anemones. These resources make it possible to profile gene expression, protein abundance, and protein localization associated with the symbiotic state. Here we review the history of "omics" studies of cnidarian-algal symbiosis and the current availability of sequence resources for corals and anemones, identifying genes putatively involved in symbiosis across 10 anthozoan species. The public availability of candidate symbiosis-associated genes leaves the field of cnidarian-algal symbiosis poised for in-depth comparative studies of sequence diversity and gene expression and for targeted functional studies of genes associated with symbiosis. Reviewing the progress to date suggests directions for future investigations of cnidarian-algal symbiosis that include (i) sequencing of Symbiodinium, (ii) proteomic analysis of the symbiosome membrane complex, (iii) glycomic analysis of Symbiodinium cell surfaces, and (iv) expression profiling of the gastrodermal cells hosting Symbiodinium.

  14. Variations of algal communities cause darkening of a Greenland glacier.

    PubMed

    Lutz, Stefanie; Anesio, Alexandre M; Jorge Villar, Susana E; Benning, Liane G

    2014-08-01

    We have assessed the microbial ecology on the surface of Mittivakkat glacier in SE-Greenland during the exceptional high melting season in July 2012 when the so far most extreme melting rate for the Greenland Ice Sheet has been recorded. By employing a complementary and multi-disciplinary field sampling and analytical approach, we quantified the dramatic changes in the different microbial surface habitats (green snow, red snow, biofilms, grey ice, cryoconite holes). The observed clear change in dominant algal community and their rapidly changing cryo-organic adaptation inventory was linked to the high melting rate. The changes in carbon and nutrient fluxes between different microbial pools (from snow to ice, cryoconite holes and glacial forefronts) revealed that snow and ice algae dominate the net primary production at the onset of melting, and that they have the potential to support the cryoconite hole communities as carbon and nutrient sources. A large proportion of algal cells is retained on the glacial surface and temporal and spatial changes in pigmentation contribute to the darkening of the snow and ice surfaces. This implies that the fast, melt-induced algal growth has a high albedo reduction potential, and this may lead to a positive feedback speeding up melting processes.

  15. Micro-structured surfaces for algal biofilm growth

    NASA Astrophysics Data System (ADS)

    Sathananthan, Suthamathy; Genin, Scott N.; Aitchison, J. Stewart; Allen, D. Grant

    2013-12-01

    It is well known that cells respond to structured surface cues that are on the micro/nanometer scale. Tissue engineering and bio-fouling fields have utilized the semiconductor device fabrication processes to make micro- and nanometer patterned surfaces to study animal cell tissue formation and to prevent algae attachment on marine surfaces respectively. In this paper we describe the use of micro-structured surfaces to study the attachment and growth of algal films. This paper gives an overview of how micro-structured surfaces are made for this purpose, how they are incorporated into a photo bioreactor and how this patterning influences the growth of an algal biofilm. Our results suggest that surface patterning with deeper V-groove patterns that are of the same size scale as the algal species has resulted in higher biomass productivity giving them a chance to embed and attach on the slope and flat surfaces whereas shallower size grooves and completely flat surfaces did not show this trend.

  16. Raman microspectroscopy based sensor of algal lipid unsaturation

    NASA Astrophysics Data System (ADS)

    Samek, Ota; Pilát, Zdeněk; Jonáš, Alexandr; Zemánek, Pavel; Šerý, Mojmír; Ježek, Jan; Bernatová, Silvie; Nedbal, Ladislav; Trtílek, Martin

    2011-05-01

    Raman spectroscopy is a powerful tool for chemical analysis. This technique can elucidate fundamental questions about the metabolic processes and intercellular variability on a single cell level. Therefore, Raman spectroscopy can significantly contribute to the study and use of microalgae in systems biology and biofuel technology. Raman spectroscopy can be combined with optical tweezers. We have employed microfluidic system to deliver the sampled microalgae to the Raman-tweezers. This instrument is able to measure chemical composition of cells and to track metabolic processes in vivo, in real-time and label-free making it possible to detect population variability in a wide array of traits. Moreover, employing an active sorting switch, cells can be separated depending on input parameters obtained from Raman spectra. We focus on algal lipids which are promising potential products for biofuel as well as for nutrition. Important parameter characterizing the algal lipids is the degree of unsaturation of the constituent fatty acids. We demonstrate the capacity of our Raman tweezers based sensor to sort cells according to the degree of unsaturation in lipid storage bodies of individual living algal cells.

  17. Algal pigments in Southern Ocean abyssal foraminiferans indicate pelagobenthic coupling

    NASA Astrophysics Data System (ADS)

    Cedhagen, Tomas; Cheah, Wee; Bracher, Astrid; Lejzerowicz, Franck

    2014-10-01

    The cytoplasm of four species of abyssal benthic foraminiferans from the Southern Ocean (around 51°S; 12°W and 50°S; 39°W) was analysed by High Performance Liquid Chromatography (HPLC) and found to contain large concentrations of algal pigments and their degradation products. The composition of the algal pigments in the foraminiferan cytoplasm reflected the plankton community at the surface. Some foraminiferans contained high ratios of chlorophyll a/degraded pigments because they were feeding on fresher phytodetritus. Other foraminiferans contained only degraded pigments which shows that they utilized degraded phytodetritus. The concentration of algal pigment and corresponding degradation products in the foraminiferan cytoplasm is much higher than in the surrounding sediment. It shows that the foraminiferans collect a diluted and sparse food resource and concentrate it as they build up their cytoplasm. This ability contributes to the understanding of the great quantitative success of foraminiferans in the deep sea. Benthic foraminiferans are a food source for many abyssal metazoans. They form a link between the degraded food resources, phytodetritus, back to the active metazoan food chains.

  18. Stable and sporadic symbiotic communities of coral and algal holobionts

    PubMed Central

    Hester, Eric R; Barott, Katie L; Nulton, Jim; Vermeij, Mark JA; Rohwer, Forest L

    2016-01-01

    Coral and algal holobionts are assemblages of macroorganisms and microorganisms, including viruses, Bacteria, Archaea, protists and fungi. Despite a decade of research, it remains unclear whether these associations are spatial–temporally stable or species-specific. We hypothesized that conflicting interpretations of the data arise from high noise associated with sporadic microbial symbionts overwhelming signatures of stable holobiont members. To test this hypothesis, the bacterial communities associated with three coral species (Acropora rosaria, Acropora hyacinthus and Porites lutea) and two algal guilds (crustose coralline algae and turf algae) from 131 samples were analyzed using a novel statistical approach termed the Abundance-Ubiquity (AU) test. The AU test determines whether a given bacterial species would be present given additional sampling effort (that is, stable) versus those species that are sporadically associated with a sample. Using the AU test, we show that coral and algal holobionts have a high-diversity group of stable symbionts. Stable symbionts are not exclusive to one species of coral or algae. No single bacterial species was ubiquitously associated with one host, showing that there is not strict heredity of the microbiome. In addition to the stable symbionts, there was a low-diversity community of sporadic symbionts whose abundance varied widely across individual holobionts of the same species. Identification of these two symbiont communities supports the holobiont model and calls into question the hologenome theory of evolution. PMID:26555246

  19. Harvesting algal biomass for biofuels using ultrafiltration membranes.

    PubMed

    Zhang, Xuezhi; Hu, Qiang; Sommerfeld, Milton; Puruhito, Emil; Chen, Yongsheng

    2010-07-01

    The objective of this paper is to develop efficient technologies for harvesting of algal biomass using membrane filtration. Foulants were characterized using scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. Anti-fouling strategies were established, such as using air-assisted backwash with air scouring, and optimizing operational conditions. A model was also developed to predict the flux decline and final concentration based on a resistance-in-series analysis and a cake development calculation. The results showed that the buildup of the algal cake layer and adsorption of algogenic organic matter (AOM) (mainly protein, polysaccharides or polysaccharide-like substances) on the membrane caused membrane fouling. The cake layer buildup was removed by conducting an air-assisted backwash every 15 min. The adsorbed AOM could be removed by soaking the membrane in 400mg/L NaClO for 1h. In our experiment the algal suspension was concentrated 150 times, to give a final cell concentration of 154.85g/L. The harvesting efficiency and average flux were 46.01 g/(m(2)h) and 45.50 L/(m(2)h), respectively. No algae were found in the permeate, which had an average turbidity of 0.018 Nephelometric Turbidity Units (NTU). The flux decline predicted by the model under different conditions was consistent with the experimental results.

  20. Ultrasound pretreatment of filamentous algal biomass for enhanced biogas production.

    PubMed

    Lee, Kwanyong; Chantrasakdakul, Phrompol; Kim, Daegi; Kong, Mingeun; Park, Ki Young

    2014-06-01

    The filamentous alga Hydrodictyon reticulatum harvested from a bench-scale wastewater treatment pond was used to evaluate biogas production after ultrasound pretreatment. The effects of ultrasound pretreatment at a range of 10-5000 J/mL were tested with harvested H. reticulatum. Cell disruption by ultrasound was successful and showed a higher degree of disintegration at a higher applied energy. The range of 10-5000 J/mL ultrasound was able to disintegrated H. reticulatum and the soluble COD was increased from 250 mg/L to 1000 mg/L at 2500 J/mL. The disintegrated algal biomass was digested for biogas production in batch experiments. Both cumulative gas generation and volatile solids reduction data were obtained during the digestion. Cell disintegration due to ultrasound pretreatment increased the specific biogas production and degradation rates. Using the ultrasound approach, the specific methane production at a dose of 40 J/mL increased up to 384 mL/g-VS fed that was 2.3 times higher than the untreated sample. For disintegrated samples, the volatile solids reduction was greater with increased energy input, and the degradation increased slightly to 67% at a dose of 50 J/mL. The results also indicate that disintegration of the algal cells is the essential step for efficient anaerobic digestion of algal biomass.