Science.gov

Sample records for aligned zno nanorod

  1. Buffer layer effect on ZnO nanorods growth alignment

    NASA Astrophysics Data System (ADS)

    Zhao, Dongxu; Andreazza, Caroline; Andreazza, Pascal; Ma, Jiangang; Liu, Yichun; Shen, Dezhen

    2005-06-01

    Vertical aligned ZnO nanorods array was fabricated on Si with introducing a ZnO thin film as a buffer layer. Two different nucleation mechanisms were found in growth process. With using Au catalyst, Zn vapor could diffuse into Au nanoclusters with forming a solid solution. Then the ZnO nucleation site is mainly on the catalyst by oxidation of Au/Zn alloy. Without catalyst, nucleation could occur directly on the surface of buffer layer by homoepitaxy. The density and the size of ZnO nanorods could be governed by morphological character of catalyst and buffer layer. The nanorods growth is followed by vapor-solid mechanism.

  2. Growth of vertically aligned ZnO nanorods using textured ZnO films

    PubMed Central

    2011-01-01

    A hydrothermal method to grow vertical-aligned ZnO nanorod arrays on ZnO films obtained by atomic layer deposition (ALD) is presented. The growth of ZnO nanorods is studied as function of the crystallographic orientation of the ZnO films deposited on silicon (100) substrates. Different thicknesses of ZnO films around 40 to 180 nm were obtained and characterized before carrying out the growth process by hydrothermal methods. A textured ZnO layer with preferential direction in the normal c-axes is formed on substrates by the decomposition of diethylzinc to provide nucleation sites for vertical nanorod growth. Crystallographic orientation of the ZnO nanorods and ZnO-ALD films was determined by X-ray diffraction analysis. Composition, morphologies, length, size, and diameter of the nanorods were studied using a scanning electron microscope and energy dispersed x-ray spectroscopy analyses. In this work, it is demonstrated that crystallinity of the ZnO-ALD films plays an important role in the vertical-aligned ZnO nanorod growth. The nanorod arrays synthesized in solution had a diameter, length, density, and orientation desirable for a potential application as photosensitive materials in the manufacture of semiconductor-polymer solar cells. PACS 61.46.Hk, Nanocrystals; 61.46.Km, Structure of nanowires and nanorods; 81.07.Gf, Nanowires; 81.15.Gh, Chemical vapor deposition (including plasma-enhanced CVD, MOCVD, ALD, etc.) PMID:21899743

  3. Direct growth of densely aligned ZnO nanorods on graphene

    NASA Astrophysics Data System (ADS)

    Honda, Mitsuhiro; Okumura, Ryuji; Ichikawa, Yo

    2016-08-01

    Densely aligned ZnO nanorods were directly grown on graphene sheets. On graphene prepared via a chemical vapor deposition technique, ZnO nanorods were synthesized by a hydrothermal method. The rod density was ∼1.4 × 109/cm2 and the nanorods were observed to be well aligned on graphene by scanning electron microscopy. The formation of such ZnO structures is considered to be induced by carbon vacancies in graphene in accordance with Raman spectroscopic results.

  4. Vertically Aligned ZnO Nanorods: Effect of Synthesis Parameters.

    PubMed

    Rehman, Zeeshan Ur; Heo, Si-Nae; Cho, Hyeon Ji; Koo, Bon Heun

    2016-06-01

    This report is devoted to the synthesis of high quality nanorods using spin coating technique for seed layer growth. Effect of different parameter i.e., spins coating counts, spin coating speed, and the effect of temperature during the drying process was analyzed. Hot plate and furnace technique was used for heating purpose and the difference in the morphology was carefully observed. It is worthy to mention here that there is a substantial effect of all the above mentioned parameters on the growth and morphology of the ZnO nanostructure. The ZnO nanorods were finally synthesized using wet chemical method. The morphological properties of the obtained nanostructures were analyzed by using FESEM technique. PMID:27427752

  5. Large hexagonal arrays of aligned ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Banerjee, D.; Rybczynski, J.; Huang, J. Y.; Wang, D. Z.; Kempa, K.; Ren, Z. F.

    2005-02-01

    Large-scale truly periodic arrays of vertically aligned zinc oxide nanorods were grown on pre-patterned and pre-annealed gold dots on a-plane sapphire substrates via the vapor liquid solid mechanism. Periodic arrays of triangular gold islands were first patterned on the a-plane sapphire substrates by the nanosphere self-assembly technique. Zinc has been found to be an effective interfacial modifier between gold and sapphire to form single catalytic dots from triangular islands. The successful fabrication of zinc oxide nanowires in truly periodic arrays opens up the possibility of achieving enhanced room-temperature ultraviolet lasing and photonic crystal based devices and sensors.

  6. Role of ZnO thin film in the vertically aligned growth of ZnO nanorods by chemical bath deposition

    NASA Astrophysics Data System (ADS)

    Son, Nguyen Thanh; Noh, Jin-Seo; Park, Sungho

    2016-08-01

    The effect of ZnO thin film on the growth of ZnO nanorods was investigated. ZnO thin films were sputter-deposited on Si substrate with varying the thickness. ZnO nanorods were grown on the thin film using a chemical bath deposition (CBD) method at 90 °C. The ZnO thin films showed granular structure and vertical roughness on the surface, which facilitated the vertical growth of ZnO nanorods. The average grain size and the surface roughness of ZnO film increased with an increase in film thickness, and this led to the increase in both the average diameter and the average length of vertically grown ZnO nanorods. In particular, it was found that the average diameter of ZnO nanorods was very close to the average grain size of ZnO thin film, confirming the role of ZnO film as a seed layer for the vertical growth of ZnO nanorods. The CBD growth on ZnO seed layers may provide a facile route to engineering vertically aligned ZnO nanorod arrays.

  7. Growth and characterization of vertically aligned ZnO nanorods grown on porous silicon: Effect of precursor concentration

    NASA Astrophysics Data System (ADS)

    Shabannia, R.; Abu Hassan, H.

    2013-10-01

    Vertically aligned ZnO nanorods were successfully synthesized on porous silicon (PS) substrates by chemical bath deposition method at low temperature. The effect of precursor concentration on the growth of ZnO nanorods were systematically characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), low and high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL), and Raman spectroscopy. The XRD results reveal that all the as-grown ZnO nanorod arrays grew preferentially oriented along the c-axis with a hexagonal wurtzite structure. The FESEM images show that the ZnO nanorods grown perpendicular to the PS substrates had diameters and lengths ranging from 13 nm to 69 nm and from 85 nm to 208 nm, respectively. The low-resolution TEM image indicates that the ZnO nanorod arrays had a uniform diameter along their whole length and a smooth surface. PL and Raman analyses reveal that the aligned ZnO nanorods exhibited a sharp ultraviolet peak and high E2 (high) at around 390 nm and 433.8 cm-1, respectively. Furthermore, the ZnO nanorods grew vertically under 0.050 M precursor concentration, resulting in a high structural and optical quality. These ZnO nanorods can be potentially used for fabricating nanoelectronic and nano-optical devices.

  8. Vertically aligned nanostructures based on Na-doped ZnO nanorods for wide band gap semiconductor memory applications.

    PubMed

    Huang, Jian; Qi, Jing; Li, Zonglin; Liu, Jianlin

    2013-10-01

    Vertically aligned undoped ZnO nanotips, nanotubes and nanorods were synthesized on the top facets of Na-doped ZnO nanorods without catalytic assistance under different growth times in a chemical vapor deposition system. The growth mechanism is discussed. The Na-doped nanorods were grown on a ZnO seed layer on Si. The p-type conductivity of the Na-doped nanorods was studied by temperature-dependent photoluminescence and nanorod back-gated field effect transistor measurements. The undoped nanorods, Na-doped nanorods and undoped seed layer form an n-p-n memory structure. The programming and retention characteristics have been demonstrated. PMID:24013400

  9. Aligned ZnO nanorod arrays growth on GaN QDs for excellent optoelectronic applications

    NASA Astrophysics Data System (ADS)

    Sang, Dandan; Li, Hongdong; Wang, Qinglin

    2016-02-01

    Uniformly aligned ZnO nanorod (NR) arrays grown on GaN quantum dots (QDs) as preferred nucleation sites are imperative for designing field emission emitters, ultraviolet photodetectors and light-emitting diodes for a wide range of new optoelectronic applications. In a recent study (2015 Nanotechnology 26 415601), Qi et al reported a novel method of fabricating ZnO NRs arrays with uniform shape, the density of which is easily tunable by adjusting the density of GaN QDs. This approach opens a door to obtaining a combination of 0D and 1D structures for optoelectronic applications.

  10. Large-scale growth of density-tunable aligned ZnO nanorods arrays on GaN QDs

    NASA Astrophysics Data System (ADS)

    Qi, Zhiqiang; Li, Senlin; Sun, Shichuang; Zhang, Wei; Ye, Wei; Fang, Yanyan; Tian, Yu; Dai, Jiangnan; Chen, Changqing

    2015-10-01

    An effective approach for growing large-scale, uniformly aligned ZnO nanorods arrays is demonstrated. The synthesis uses a GaN quantum dot (QD) template produced by a self-assembled Stranski-Krastanow mode in metal organic chemical vapor deposition, which serves as a nucleation site for ZnO owing to the QD’s high surface free energy. The resultant ZnO nanorods with uniform shape and length align vertically on the template, while their density is easily tunable by adjusting the density of GaN QDs, which can be adjusted by simply varying growth interruption. By controlling the density of ZnO nanorod arrays, their optical performance can also be improved. This approach opens the possibility of combining one-dimensional (1D) with 0D nanostructures for applications in sensor arrays, piezoelectric antenna arrays, optoelectronic devices, and interconnects.

  11. UV light sensing properties of Sm doped vertically aligned ZnO nanorod arrays

    SciTech Connect

    Kumar, D. Ranjith; Ranjith, K. S.; Rajendrakumar, R. T.

    2015-06-24

    Samarium doped ZnO nanorods were grown on silicon substrate by using vapor phase transport method (VPT) with the growth temperature of 950°C. The synthesized nanorods were characterized by XRD, field emission scanning electron microscopy, Raman spectra, and photocurrent measurements. The XRD result revealed that Sm was successfully doped into lattice plane of hexagonal ZnO nanorods. The FESEM result confirms the pure ZnO has nanorod like morphology with an average diameter and length of 130nm and 10µm respectively. The above observation is supported by the Micro-Raman spectroscopy result. The photocurrent in the visible region has been significantly enhanced due to deposition of Sm on the surface of the ZnO nanorods. Sm acts as a visible sensitizer because of its lower band gap compared to ZnO.

  12. Schottky-contacted vertically self-aligned ZnO nanorods for hydrogen gas nanosensor applications

    SciTech Connect

    Ranwa, Sapana; Kumar, Mohit; Kumar, Mahesh; Singh, Jitendra; Fanetti, Mattia

    2015-07-21

    Vertically well aligned ZnO nanorods (NRs) were grown on Si(100) substrate using RF magnetron sputtering technique. Scanning electron microscopy images confirms uniform distribution of NRs on 2 in. wafer with average diameter, height and density being ∼75 nm, ∼850 nm, and ∼1.5 × 10{sup 10} cm{sup −2}, respectively. X-ray diffraction reveals that the ZnO NRs are grown along c-axis direction with wurtzite crystal structure. Cathodoluminescence spectroscopy, which shows a single strong peak around 3.24 eV with full width half maxima 130 meV, indicates the high crystalline and optical quality of ZnO and very low defect density. Vertically aligned nanosensors were fabricated by depositing gold circular Schottky contacts on ZnO NRs. Resistance responses of nanosensors were observed in the range from 50 to 150 °C in 1% and 5% hydrogen in argon environment, which is below and above the explosive limit (4%) of hydrogen in air. The nanosensor's sensitivity increases from 11% to 67% with temperature from 50 to 150 °C and also shows fast response time (9–16 s) and moderate recovery time (100–200 s). A sensing mechanism is proposed based on Schottky barrier changes at heterojunctions and change in depletion region of NRs.

  13. Schottky-contacted vertically self-aligned ZnO nanorods for hydrogen gas nanosensor applications

    NASA Astrophysics Data System (ADS)

    Ranwa, Sapana; Kumar, Mohit; Singh, Jitendra; Fanetti, Mattia; Kumar, Mahesh

    2015-07-01

    Vertically well aligned ZnO nanorods (NRs) were grown on Si(100) substrate using RF magnetron sputtering technique. Scanning electron microscopy images confirms uniform distribution of NRs on 2 in. wafer with average diameter, height and density being ˜75 nm, ˜850 nm, and ˜1.5 × 1010 cm-2, respectively. X-ray diffraction reveals that the ZnO NRs are grown along c-axis direction with wurtzite crystal structure. Cathodoluminescence spectroscopy, which shows a single strong peak around 3.24 eV with full width half maxima 130 meV, indicates the high crystalline and optical quality of ZnO and very low defect density. Vertically aligned nanosensors were fabricated by depositing gold circular Schottky contacts on ZnO NRs. Resistance responses of nanosensors were observed in the range from 50 to 150 °C in 1% and 5% hydrogen in argon environment, which is below and above the explosive limit (4%) of hydrogen in air. The nanosensor's sensitivity increases from 11% to 67% with temperature from 50 to 150 °C and also shows fast response time (9-16 s) and moderate recovery time (100-200 s). A sensing mechanism is proposed based on Schottky barrier changes at heterojunctions and change in depletion region of NRs.

  14. Synthesis of Vertically Aligned ZnO Nanorods on Ni-Based Buffer Layers Using a Thermal Evaporation Process

    NASA Astrophysics Data System (ADS)

    Kuo, Dong-Hau; He, Jheng-Yu; Huang, Ying-Sheng

    2012-03-01

    Uniform, vertically aligned ZnO nanorods have been grown mainly on Au-coated and ZnO-coated sapphire substrates, ZnO- and GaN-coated substrates, or self-catalyzing substrates. Conventionally, Ni-coated substrates have resulted in thick rods with diameter more than 250 nm, rods with nonuniform distribution in diameter, or rods with an alignment problem. In the best result in this paper, slender, uniform, vertically aligned, solely UV-emitting ZnO nanorods with diameter of 110 ± 25 nm and length of 30 ± 10 μm have been successfully grown at 700°C for 2 h on sapphire substrates covered with Ni-based buffer layers by using metallic zinc and oxygen as reactants. Scanning electron microscopy and room-temperature photoluminescence have been used to investigate the effects of process conditions on the slenderness and vertical alignment of the ZnO rods. To develop the desired ZnO nanorods, etched sapphire substrates, a second metallic Sn buffer layer on top of a spin-coated nickel oxide layer, polyvinyl alcohol binder at 10% concentration in solution of iron nitrate, and pyrolysis and reduction reactions were involved. Defect photoemission for thick ZnO rods is attributed to insufficient oxygen supply during the growth process with fixed oxygen flow rate.

  15. Magnetic and optical properties of Mn-doped ZnO vertically aligned nanorods synthesized by hydrothermal technique

    NASA Astrophysics Data System (ADS)

    Panda, J.; Sasmal, I.; Nath, T. K.

    2016-03-01

    In this paper we have reported the synthesis of high quality vertically aligned undoped and Mn-doped ZnO single crystalline nanorods arrays on Si (100) substrates using two steps process, namely, initial slow seed layer formation followed by solution growth employing wet chemical hydrothermal method. The shapes of the as grown single crystalline nanorods are hexagonal. The diameter and length of the as grown undoped ZnO nanorods varies in the range of 80-150 nm and 1.0 - 1.4 μm, respectively. Along with the lattice parameters of the hexagonal crystal structure, the diameter and length of Mn doped ZnO nanorods are found to increase slightly as compared to the undoped ZnO nanorods. The X-ray photoelectron spectroscopy confirms the presence of Mn atoms in Mn2+ state in the single crystalline ZnO nanorods. The recorded photoluminescence spectrum contains two emissions peaks having UV exciton emissions along with a green-yellow emission. The green-yellow emissions provide the evidence of singly ionized oxygen vacancies. The magnetic field dependent magnetization measurements [M (H)] and zero field cooled (ZFC) and field cooled (FC) magnetization [M(T)] measurements have been carried out at different isothermal conditions in the temperature range of 5-300 K. The Mn doped ZnO nanorods clearly show room temperature ferromagnetic ordering near room temperature down to 5 K. The observed magnetization may be attributed to the long range ferromagnetic interaction between bound magnetic polarons led by singly charged oxygen vacancies.

  16. Synthesis and photoluminescence properties of aligned Zn{sub 2}GeO{sub 4} coated ZnO nanorods and Ge doped ZnO nanocombs

    SciTech Connect

    Su Yong; Meng Xia Chen Yiqing; Li Sen; Zhou Qingtao; Liang Xuemei; Feng Yi

    2008-07-01

    Aligned Zn{sub 2}GeO{sub 4} coated ZnO nanorods and Ge doped ZnO nanocombs were synthesized on a silicon substrate by a simple thermal evaporation method. The structure and morphology of the as-synthesized nanostructure were characterized using scanning electron microscopy and transmission electron microscopy. The growth of aligned Zn{sub 2}GeO{sub 4} coated ZnO nanorods and Ge doped ZnO nanocombs follows a vapor-solid (VS) process. Photoluminescence properties were also investigated at room temperature. The photoluminescence spectrum reveals the nanostructures have a sharp ultraviolet luminescence peak centered at 382 nm and a broad green luminescence peak centered at about 494 nm.

  17. Island nucleation, optical and ferromagnetic properties of vertically aligned secondary growth ZnO : Cu nanorod arrays

    NASA Astrophysics Data System (ADS)

    Huang, Jun; Zhu, Liping; Hu, Liang; Liu, Shijiang; Zhang, Jie; Zhang, Honghai; Yang, Xiaopeng; Sun, Luwei; Li, Dehui; Ye, Zhizhen

    2012-02-01

    The paper reports an island nucleation and secondary growth of aligned ZnO : Cu nanorod arrays via thermal vapor phase transport. Results analysis indicates that the secondary segment is epitaxially grown on the ZnO : Cu nanorods with the radius strongly dependent on temperature and the concentration of zinc vapor. The modified characteristic radius (Rc) model is used to explain the nucleation and secondary growth process. Temperature-dependent photoluminescence spectra indicate that the band gap emission of the secondary growth nanorods is greatly restrained. A controversial 3.31 eV emission (A line) and two different donor-acceptor pair (DAP) recombinations at 3.24 eV and 2.48 eV are observed at 13 K. The A line shows a different behavior from the two DAP emissions during the heat-up process. Intrinsic room temperature ferromagnetism (RTFM) is observed in the secondary growth ZnO : Cu nanorods and it can be explained by oxygen vacancy and copper defects related to bound magnetic polar (BMP) or double exchange mechanism.The paper reports an island nucleation and secondary growth of aligned ZnO : Cu nanorod arrays via thermal vapor phase transport. Results analysis indicates that the secondary segment is epitaxially grown on the ZnO : Cu nanorods with the radius strongly dependent on temperature and the concentration of zinc vapor. The modified characteristic radius (Rc) model is used to explain the nucleation and secondary growth process. Temperature-dependent photoluminescence spectra indicate that the band gap emission of the secondary growth nanorods is greatly restrained. A controversial 3.31 eV emission (A line) and two different donor-acceptor pair (DAP) recombinations at 3.24 eV and 2.48 eV are observed at 13 K. The A line shows a different behavior from the two DAP emissions during the heat-up process. Intrinsic room temperature ferromagnetism (RTFM) is observed in the secondary growth ZnO : Cu nanorods and it can be explained by oxygen vacancy and copper

  18. Al-doped ZnO aligned nanorod arrays for opto-electronic and sensor applications

    NASA Astrophysics Data System (ADS)

    Holloway, T.; Mundle, R.; Dondapati, H.; Konda, R. B.; Bahoura, M.; Pradhan, A. K.

    2012-04-01

    We report on the growth of vertically aligned Al:ZnO nanorod arrays synthesized by the hydrothermal technique at considerably low temperature on a sputtered Al:ZnO seed layer. The morphology demonstrates that the nanorod arrays maintain remarkable alignment along the c-axis over a large area. The optoelectronic properties of nanorod arrays on Al:ZnO/p-Si seed layer with SiO2 have been illustrated. The photocurrent is significantly reduced in nanorod arrays on AZO/SiO2/p-Si heterojunction due to multiple scattering phenomena associated with the nanorod arrays. The optical properties of the AZO film with and without the AZO nanorod arrays were investigated. Also the effects of an intermediate layer in the AZO/P-Si heterojunction structure with and without the AZO nanorod array present were explored. All the various intermediate layers displayed photovoltaic effect behavior, especially with the AZO/SiO2/P-Si heterojunction structure, which exhibited ideal diode behavior. The optoelectronic properties of nanorod arrays on AZO/P-Si seed layer with SiO2 have been illustrated. The photocurrent is significantly reduced in nanorod arrays on AZO/SiO2/P-Si heterojunction due to multiple scattering phenomena associated with the nanorod arrays. The results have tremendous impact for sensor fabrication, including glucose sensor.

  19. Hydrothermal growth and characterization of vertically well-aligned and dense ZnO nanorods on glass and silicon using a simple optimizer system

    NASA Astrophysics Data System (ADS)

    Mohammad, Sabah M.; Hassan, Z.; Ahmed, Naser M.; Talib, Rawnaq A.; Abd-Alghafour, Nabeel M.; Omar, A. F.

    2016-07-01

    Vertically, well-aligned and high density ZnO nanorods were successfully hydrothermally grown on glass and silicon substrates using a simple and low cost system. The mechanism of synthesis of ZnO nanorods, generated with our system under hydrothermal conditions, is investigated in this report. Field-emission scanning electron microscopy indicated that the fabricated ZnO nanorods on both substrates have hexagonal shape with diameters ranging from 20 nm to 70 nm which grew vertically from the substrate. XRD analysis confirms the formation of wurtzite ZnO phase with a preferred orientation along (002) direction perpendicular on the substrate and enhanced crystallinity. The low value of the tensile strain (0.126 %) revealed that ZnO nanorods preferred to grow along the c-axis for both substrates. Photoluminescence spectra exhibited a strong, sharp UV near band edge emission peak with narrow FWHM values for both samples.

  20. Effect of TiO2 thickness on nanocomposited aligned ZnO nanorod/TiO2 for dye-sensitized solar cells

    NASA Astrophysics Data System (ADS)

    Saurdi, I.; Shafura, A. K.; Azhar, N. E. A.; Ishak, A.; Malek, M. F.; Alrokayan, A. H. Salman; Khan, Haseeb A.; Mamat, M. H.; Rusop, M.

    2016-07-01

    The TiO2 films were deposited on glass substrate at different thicknesses with different deposition frequencies (1, 2, 3 and 4 times) using spin coating technique and their structural properties were investigated. Subsequently, the nanocomposited aligned ZnO nanorods and TiO2 were formed by deposited the TiO2 on top of aligned ZnO Nanorod on ITO-coated glass at different thicknesses using the same method of TiO2 deposited on glass substrate. The nanocomposited aligned ZnO nanorod/TiO2 were coated with different thicknesses of 900µm, 1815µm, 2710µm, 3620µm and ZnO without TiO2. The dye-sensitized solar cells were fabricated from the nanocomposited aligned ZnO nanorod/TiO2 with thickness of 900µm, 1815µm, 2710µm and 3620µm and ZnO without TiO2 and their photovoltaic properties of the DSSCs were investigated. From the solar simulator measurement the solar energy conversion efficiency (η) of 2.543% under AM 1.5 was obtained for the ZnO nanorod/TiO2 photoanode-2710µm Dye-Sensitized solar cell.

  1. Vertically aligned ZnO nanorod core-polypyrrole conducting polymer sheath and nanotube arrays for electrochemical supercapacitor energy storage

    PubMed Central

    2014-01-01

    Nanocomposite electrodes having three-dimensional (3-D) nanoscale architecture comprising of vertically aligned ZnO nanorod array core-polypyrrole (PPy) conducting polymer sheath and the vertical PPy nanotube arrays have been investigated for supercapacitor energy storage. The electrodes in the ZnO nanorod core-PPy sheath structure are formed by preferential nucleation and deposition of PPy layer over hydrothermally synthesized vertical ZnO nanorod array by controlled pulsed current electropolymerization of pyrrole monomer under surfactant action. The vertical PPy nanotube arrays of different tube diameter are created by selective etching of the ZnO nanorod core in ammonia solution for different periods. Cyclic voltammetry studies show high areal-specific capacitance approximately 240 mF.cm-2 for open pore and approximately 180 mF.cm-2 for narrow 30-to-36-nm diameter PPy nanotube arrays attributed to intensive faradic processes arising from enhanced access of electrolyte ions through nanotube interior and exterior. Impedance spectroscopy studies show that capacitive response extends over larger frequency domain in electrodes with PPy nanotube structure. Simulation of Nyquist plots by electrical equivalent circuit modeling establishes that 3-D nanostructure is better represented by constant phase element which accounts for the inhomogeneous electrochemical redox processes. Charge-discharge studies at different current densities establish that kinetics of the redox process in PPy nanotube electrode is due to the limitation on electron transport rather than the diffusive process of electrolyte ions. The PPy nanotube electrodes show deep discharge capability with high coulomb efficiency and long-term charge-discharge cyclic studies show nondegrading performance of the specific areal capacitance tested for 5,000 cycles. PMID:25246867

  2. Effect of gamma irradiation on Schottky-contacted vertically aligned ZnO nanorod-based hydrogen sensor.

    PubMed

    Ranwa, Sapana; Barala, Surendra Singh; Fanetti, Mattia; Kumar, Mahesh

    2016-08-26

    We report the impact of gamma irradiation on the performance of a gold Schottky-contacted ZnO nanorod-based hydrogen sensor. RF-sputtered vertically aligned highly c-axis-oriented ZnO NRs were grown on Si(100) substrate. X-ray diffraction shows no significant change in crystal structure at low gamma doses from 1 to 5 kGy. As gamma irradiation doses increase to 10 kGy, the single crystalline ZnO structure converts to polycrystalline. The photoluminescence spectra also shows suppression of the near-band emission peak and the huge wide-band spectrum indicates the generation of structural defects at high gamma doses. At 1 kGy, the hydrogen sensor response was enhanced from 67% to 77% for 1% hydrogen in pure argon at a 150 °C operating temperature. However, at 10 kGy, the relative response decreases to 33.5%. High gamma irradiation causes displacement damage and defects in ZnO NRs, and as a result, degrades the sensor's performance as a result. Low gamma irradiation doses activate the ZnO NR surface through ionization, which enhances the sensor performance. The relative response of the hydrogen sensor was enhanced by ∼14.9% with respect to pristine ZnO using 1 kGy gamma ray treatment. PMID:27418478

  3. Effect of gamma irradiation on Schottky-contacted vertically aligned ZnO nanorod-based hydrogen sensor

    NASA Astrophysics Data System (ADS)

    Ranwa, Sapana; Singh Barala, Surendra; Fanetti, Mattia; Kumar, Mahesh

    2016-08-01

    We report the impact of gamma irradiation on the performance of a gold Schottky-contacted ZnO nanorod-based hydrogen sensor. RF-sputtered vertically aligned highly c-axis-oriented ZnO NRs were grown on Si(100) substrate. X-ray diffraction shows no significant change in crystal structure at low gamma doses from 1 to 5 kGy. As gamma irradiation doses increase to 10 kGy, the single crystalline ZnO structure converts to polycrystalline. The photoluminescence spectra also shows suppression of the near-band emission peak and the huge wide-band spectrum indicates the generation of structural defects at high gamma doses. At 1 kGy, the hydrogen sensor response was enhanced from 67% to 77% for 1% hydrogen in pure argon at a 150 °C operating temperature. However, at 10 kGy, the relative response decreases to 33.5%. High gamma irradiation causes displacement damage and defects in ZnO NRs, and as a result, degrades the sensor’s performance as a result. Low gamma irradiation doses activate the ZnO NR surface through ionization, which enhances the sensor performance. The relative response of the hydrogen sensor was enhanced by ∼14.9% with respect to pristine ZnO using 1 kGy gamma ray treatment.

  4. Influence of Gas Flow Rate for Formation of Aligned Nanorods in ZnO Thin Films for Solar-Driven Hydrogen Production

    SciTech Connect

    Shet, S.; Chen, L.; Tang, H.; Nuggehalli, R.; Wang, H.; Yan, Y.; Turner, J.; Al-Jassim, M.

    2012-04-01

    ZnO thin films have been deposited in mixed Ar/N{sub 2} gas ambient at substrate temperature of 500 C by radiofrequency sputtering of ZnO targets. We find that an optimum N{sub 2}-to-Ar ratio in the deposition ambient promotes the formation of well-aligned nanorods. ZnO thin films grown in ambient with 25% N{sub 2} gas flow rate promoted nanorods aligned along c-axis and exhibit significantly enhanced photoelectrochemical (PEC) response, compared with ZnO thin films grown in an ambient with different N{sub 2}-to-Ar gas flow ratios. Our results suggest that chamber ambient is critical for the formation of aligned nanostructures, which offer potential advantages for improving the efficiency of PEC water splitting for H{sub 2} production.

  5. Solution-processed Cu2ZnSnS4 superstrate solar cell using vertically aligned ZnO nanorods.

    PubMed

    Lee, Dongwook; Yong, Kijung

    2014-02-14

    One-dimensional (1D) zinc oxide (ZnO) nanostructures are considered to be promising materials for use in thin film solar cells because of their high light harvesting and charge collection efficiencies. We firstly report enhanced photovoltaic performances in Cu2ZnSnS4 (CZTS) thin film solar cells prepared using ZnO nanostructures. A CdS-coated, vertically well-aligned ZnO nanorod (NR) array was prepared via a hydrothermal reaction and nanocrystal layer deposition (NCLD) and was used as a transparent window/buffer layer in a CZTS thin film photovoltaic. A light absorber CZTS thin film was prepared on the CdS/ZnO NRs in air by depositing a non-toxic precursor solution that was annealed in two steps at temperatures up to 250 °C. The crystallized CZTS phase completely infiltrated the CdS/ZnO NR array. The nanostructured ZnO array provided improved light harvesting behavior compared to a thin film configuration by measuring UV-vis transmittance spectroscopy. The prepared CZTS/CdS/ZnO NR device exhibited a solar energy conversion efficiency of 1.2%, which is the highest efficiency yet reported for nanostructured superstrate CZTS solar cells. PMID:24434835

  6. Hydrothermal synthesis of highly crystalline ZnO nanorod arrays: Dependence of morphology and alignment on growth conditions

    NASA Astrophysics Data System (ADS)

    Azzez, Shrook A.; Hassan, Z.; Hassan, J. J.; Alimanesh, M.; Rasheed, Hiba S.; Sabah, Fayroz A.; Abdulateef, Sinan A.

    2016-07-01

    Highly oriented zinc oxide nanorod were successfully grown on seeded p-type silicone substrate by hydrothermal methode. The morphology and the crystallinty of ZnO c-axis (002) arrays were systematically studied using field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) methods. The effect of seed layer pre-annealing on nanorods properties was explained according to the nucleation site of ZnO nanoparticles on silicon substrate. In addition, the variation of the equal molarity of zinc nitrate hexahydrate and hexamine concentrations in the reaction vessel play a crucial role related to the ZnO nanorods.

  7. Effect of Nb-doped TiO2 on nanocomposited aligned ZnO nanorod/TiO2:Nb for dye-sensitized solar cells

    NASA Astrophysics Data System (ADS)

    Saurdi, I.; Shafura, A. K.; Azhar, N. E. A.; Ishak, A.; Malek, M. F.; Alrokayan, A. H. Salman; Khan, Haseeb A.; Mamat, M. H.; Rusop, M.

    2016-07-01

    The Nb-doped TiO2 films were deposited on glass substrate at different Nb concentrations of 0 at.%, 1 at.%, 3 at.%, 5 at.% and 7 at.%, respectively and their electrical and structural properties were investigated. Subsequently, the Nb-doped TiO2 films were deposited on top of aligned ZnO Nanorod on ITO glass substrates using spin coating technique. The nanocomposited aligned ZnO nanorod/Nb-doped TiO2 (TiO2:Nb) were coated with different Nb concentrations of 0 at.%, 1 at.%, 3 at.%, 5 at.% and 7 at.%, respectively. The Dye-sensitized solar cells were fabricated from the nanocomposited aligned ZnO nanorod/TiO2:Nb photoanodes and their effects on the performance of the DSSCs were investigated. From the solar simulator measurement of DSSC the solar energy conversion efficiency (η) of 5.376% under AM 1.5 was obtained for the ZnO nanorod/TiO2:Nb-5at.%.

  8. Self-assembled, aligned ZnO nanorod buffer layers for high-current-density, inverted organic photovoltaics.

    PubMed

    Rao, Arun D; Karalatti, Suresh; Thomas, Tiju; Ramamurthy, Praveen C

    2014-10-01

    Two different soft-chemical, self-assembly-based solution approaches are employed to grow zinc oxide (ZnO) nanorods with controlled texture. The methods used involve seeding and growth on a substrate. Nanorods with various aspect ratios (1-5) and diameters (15-65 nm) are grown. Obtaining highly oriented rods is determined by the way the substrate is mounted within the chemical bath. Furthermore, a preheat and centrifugation step is essential for the optimization of the growth solution. In the best samples, we obtain ZnO nanorods that are almost entirely oriented in the (002) direction; this is desirable since electron mobility of ZnO is highest along this crystallographic axis. When used as the buffer layer of inverted organic photovoltaics (I-OPVs), these one-dimensional (1D) nanostructures offer: (a) direct paths for charge transport and (b) high interfacial area for electron collection. The morphological, structural, and optical properties of ZnO nanorods are studied using scanning electron microscopy, X-ray diffraction, and ultraviolet-visible light (UV-vis) absorption spectroscopy. Furthermore, the surface chemical features of ZnO films are studied using X-ray photoelectron spectroscopy and contact angle measurements. Using as-grown ZnO, inverted OPVs are fabricated and characterized. For improving device performance, the ZnO nanorods are subjected to UV-ozone irradiation. UV-ozone treated ZnO nanorods show: (i) improvement in optical transmission, (ii) increased wetting of active organic components, and (iii) increased concentration of Zn-O surface bonds. These observations correlate well with improved device performance. The devices fabricated using these optimized buffer layers have an efficiency of ∼3.2% and a fill factor of 0.50; this is comparable to the best I-OPVs reported that use a P3HT-PCBM active layer. PMID:25238197

  9. Seedless Pattern Growth of Quasi-Aligned ZnO Nanorod Arrays on Cover Glass Substrates in Solution

    NASA Astrophysics Data System (ADS)

    Ahsanulhaq, Q.; Kim, Jin Hwan; Kim, Jeong Hyun; Hahn, Y. B.

    2010-03-01

    A hybrid technique for the selective growth of ZnO nanorod arrays on wanted areas of thin cover glass substrates was developed without the use of seed layer of ZnO. This method utilizes electron-beam lithography for pattern transfer on seedless substrate, followed by solution method for the bottom-up growth of ZnO nanorod arrays on the patterned substrates. The arrays of highly crystalline ZnO nanorods having diameter of 60 ± 10 nm and length of 750 ± 50 nm were selectively grown on different shape patterns and exhibited a remarkable uniformity in terms of diameter, length, and density. The room temperature cathodluminescence measurements showed a strong ultraviolet emission at 381 nm and broad visible emission at 585-610 nm were observed in the spectrum.

  10. Functionalized vertically aligned ZnO nanorods for application in electrolyte-insulator-semiconductor based pH sensors and label-free immuno-sensors

    NASA Astrophysics Data System (ADS)

    Kumar, Narendra; Senapati, Sujata; Kumar, Satyendra; Kumar, Jitendra; Panda, Siddhartha

    2016-04-01

    Vertically aligned ZnO nanorods were grown on a SiO2/Si surface by optimization of the temperature and atmosphere for annealing of the seed. The seed layer annealed at 500 °C in vacuum provided well separated and uniform seeds which also provided the best condition to get densely packed, uniformly distributed, and vertically aligned nanorods. These nanorods grown on the substrates were used to fabricate electrolyte-insulator-semiconductor (EIS) devices for pH sensing. Etching of ZnO at acidic pH prevents the direct use of nanorods for pH sensing. Therefore, the nanorods functionalised with 3-aminopropyltriethoxysilane (APTES) were utilized for pH sensing and showed the pH sensitivity of 50.1 mV/pH. APTES is also known to be used as a linker to immobilize biomolecules (such as antibodies). The EIS device with APTES functionalized nanorods was used for the label free detection of prostate-specific antigen (PSA). Finally, voltage shifts of 23 mV and 35 mV were observed with PSA concentrations of 1 ng/ml and 100 ng/ml, respectively.

  11. Well aligned ZnO nanorods growth on the gold coated glass substrate by aqueous chemical growth method using seed layer of Fe3O4 and Co3O4 nanoparticles

    NASA Astrophysics Data System (ADS)

    Ibupoto, Z. H.; Khun, K.; Lu, Jun; Liu, Xianjie; AlSalhi, M. S.; Atif, M.; Ansari, Anees A.; Willander, M.

    2013-04-01

    In this study, Fe3O4 and Co3O4 nanoparticles were prepared by co-precipitation method and sol-gel method respectively. The synthesised nanoparticles were characterised by X-ray diffraction [XRD] and Raman spectroscopy techniques. The obtained results have shown the nanocrystalline phase of obtained Fe3O4 and Co3O4 nanoparticles. Furthermore, the Fe3O4 and Co3O4 nanoparticles were used as seed layer for the fabrication of well-aligned ZnO nanorods on the gold coated glass substrate by aqueous chemical growth method. Scanning electron microscopy (SEM), high resolution transmission electron microscopy [HRTEM], as well as XRD and energy dispersive X-ray techniques were used for the structural characterisation of synthesised ZnO nanorods. This study has explored highly dense, uniform, well-aligned growth pattern along 0001 direction and good crystal quality of the prepared ZnO nanorods. ZnO nanorods are only composed of Zn and O atoms. Moreover, X-ray photoelectron spectroscopy was used for the chemical analysis of fabricated ZnO nanorods. In addition, the structural characterisation and the chemical composition study and the optical investigation were carried out for the fabricated ZnO nanorods and the photoluminescence [PL] spectrum have shown strong ultraviolet (UV) peak at 381 nm for Fe3O4 nanoparticles seeded ZnO nanorods and the PL spectrum for ZnO nanorods grown with the seed layer of Co3O4 nanoparticles has shown a UV peak at 382 nm. The green emission and orange/red peaks were also observed for ZnO nanorods grown with both the seed layers. This study has indicated the fabrication of well aligned ZnO nanorods using the one inorganic nanomaterial on other inorganic nanomaterial due to their similar chemistry.

  12. Structural and optical properties of dense vertically aligned ZnO nanorods grown onto silver and gold thin films by galvanic effect with iron contamination

    SciTech Connect

    Scarpellini, D.; Paoloni, S.; Medaglia, P.G.; Pizzoferrato, R.; Orsini, A.; Falconi, C.

    2015-05-15

    Highlights: • ZnO nanorods were grown on Au and Ag films in aqueous solution by galvanic effect. • The method is prone to metal contamination which can influence the ZnO properties. • Iron doping improves the lattice matching between ZnO and the substrate. • Energy levels of point defects are lowered and the light emission is red-shifted. • Galvanic-induced nucleation starts and proceeds continuously during the growth. - Abstract: Dense arrays of vertically aligned ZnO nanorods have been grown onto either silver or gold seedless substrates trough a simple hydrothermal method by exploiting the galvanic effect between the substrate and metallic parts. The nanorods exhibit larger bases and more defined hexagonal shapes, in comparison with standard non-galvanic wet-chemistry synthesis. X-ray diffraction (XRD) shows that the iron contamination, associated with the galvanic contact, significantly improves the in-plane compatibility of ZnO with the Au and Ag cubic lattice. Photoluminescence (PL) measurements indicate that the contamination does not affect the number density of localized defects, but lowers their energy levels uniformly; differently, the band-edge emission is not altered appreciably. Finally, we have found that the ZnO hetero-nucleation by galvanic effect initiates at different times in different sites of the substrate area. Our results can be useful for the fabrication of high performance piezonanodevices comprising high-density metal-to-ZnO nanoscaled junctions without intermediate polycrystalline layers.

  13. Temperature dependent electrical transport studies of self-aligned ZnO nanorods/Si heterostructures deposited by sputtering

    SciTech Connect

    Ranwa, Sapana; Dixit, Vivek; Kumar, Mahesh; Kumar Kulriya, Pawan

    2014-06-21

    Self-aligned ZnO nanorods (NRs) were grown on n-Si(100) substrate by RF sputtering techniques. The NRs are uniformly grown on 2-inch wafer along [0001] direction. Single-crystalline wurtzite structure of ZnO NRs was confirmed by X-ray diffraction. The average diameter, height, and density of NRs are found 48 nm, 750 nm, and 1.26 × 10{sup 10} cm{sup −2}, respectively. The current-voltages (I-V) characteristics of ZnO NRs/Si heterojunction (HJ) were studied in the temperature range of 120–300 K and it shows a rectifying behavior. Barrier height (ϕ{sub B}) and ideality factor (η) were estimated from thermionic emission model and found to be highly temperature dependent in nature. Richardson constant (A{sup *}) was evaluated using Richardson plot of ln(I{sub o}/T{sup 2}) versus q/kT plot by linear fitting in two temperature range 120–180 K and 210–300 K. Large deviation in Richardson constant from its theoretical value of n-Si indicates the presence of barrier inhomogeneities at HJ. Double Gaussian distribution of barrier height with thermionic equation gives mean barrier heights of 0.55 ± 0.01 eV and 0.86 ± 0.02 eV for two different temperature regions 120–180 K and 210–300 K, respectively. Modified Richardson plot provided two values of Richardson constant for two temperature regions. However, for higher temperature range (210–300 K), the calculated value of Richardson constant ∼123 A cm{sup −2} K{sup −2} was close to the ideal Richardson constant for n-Si.

  14. Low-temperature growth of well-aligned ZnO nanorods/nanowires on flexible graphite sheet and their photoluminescence properties

    SciTech Connect

    Zhong, Guo; Kalam, Abul; Al-Shihri, Ayed Sad; Su, Qingmei; Li, Jie; Du, Gaohui

    2012-06-15

    Highlights: ► Well-aligned ZnO nanostructures were grown on flexible graphite sheets at 500–650 °C. ► ZnO nanostructures are formed via self-catalytic vapor–solid process assisted by immiscibility of ZnO with graphite. ► The ZnO nanostructures show intensive green emission. ► The photoluminescence property can be easily tuned by changing growth condition or annealing treatment. -- Abstract: We have grown large-scale well-aligned ZnO nanorods/nanowires on commercial flexible graphite sheet (FGS) at low temperature via chemical vapor deposition method. The products were characterized by X-ray diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy. The effects of the growth temperature and oxygen flow rate on the morphology of ZnO nanostructures have been investigated. The growth mechanism of ZnO is found to be a self-catalytic vapor–solid process assisted by the immiscibility of ZnO with graphite. The as-grown ZnO/FGS products show strong green emission and their photoluminescence properties can be tuned by changing growth condition or annealing treatment.

  15. Thickness-controlled synthesis of vertically aligned c-axis oriented ZnO nanorod arrays: Effect of growth time via novel dual sonication sol-gel process

    NASA Astrophysics Data System (ADS)

    Firdaus Malek, Mohd; Hafiz Mamat, Mohamad; Soga, Tetsuo; Rahman, Saadah Abdul; Abu Bakar, Suriani; Syakirin Ismail, Ahmad; Mohamed, Ruziana; Alrokayan, Salman A. H.; Khan, Haseeb A.; Rusop Mahmood, Mohamad

    2016-01-01

    Zinc-oxide (ZnO) nanorod arrays were successfully prepared by using dual sonication sol-gel process. Field emission scanning electron microscopy revealed that the nanorods exhibited a hexagonal structure with a flat-end facet. The nanorods displayed similar surface morphologies and grew uniformly on the seed layer substrate, with the average diameter slightly increasing to the range of 65 to 80 nm after being immersed for varying growth times. Interestingly, thickness measurements indicated that the thicknesses of the samples increased as the growth time was extended. In addition, the X-ray diffraction spectra indicated that the prepared ZnO nanorods with a hexagonal wurtzite structure grew preferentially along the c-axis. Therefore, we can conclude that the diameter, length, and orientation of the ZnO nanorod arrays along the c-axis are controllable by adjusting the growth time, motivating us to further explore the growth mechanisms of ZnO nanorods.

  16. Facile construction of vertically aligned ZnO nanorod/PEDOT:PSS hybrid heterojunction-based ultraviolet light sensors: efficient performance and mechanism

    NASA Astrophysics Data System (ADS)

    Ranjith, K. S.; Rajendra Kumar, R. T.

    2016-03-01

    We demonstrate a simple, planar manufacturing process-compatible fabrication of highly efficient UV sensors based on a hybrid heterojunction of an array of vertically aligned ZnO nanorods (NRs) and PEDOT:PSS. The ZnO NR array was grown by the solution growth process and the aspect ratio (length 1 to 4 μm, diameter ˜80 nm) of the rods was controlled by varying the growth time. UV sensors based on (i) naked ZnO NRs and (ii) ZnO NR/PEDOT:PSS heterojunctions were fabricated and tested. The UV sensitivity of bare ZnO NRs was found to increase with increasing aspect ratio of the NRs due to the increase in the photogenerated charge carriers as the fraction of material interacting with the light increases. Under 5 V bias, naked ZnO NR arrays showed a photocurrent of 8.84 × 10-5 A, a responsivity of 0.538 A W-1 and a sensitivity of 4.80 under UV (λ = 256 nm, 130 μW) illumination. ZnO NR/PEDOT:PSS hybrid heterojunctions showed diode-like behavior with a leakage current less than 2.54 × 10-8 A at -5 V and forward turn-on voltage of 1.1 V. ZnO NR/polymer-based hybrid heterojunctions show a photocurrent of 6.74 × 10-4 A, responsivity of 5.046 A W-1 and excellent sensitivity of 37.65 under UV (λ = 256 nm, 130 μW) illumination. Compared with bare ZnO NR arrays, the ZnO NR/polymer heterojunction device shows responsivity enhanced by a factor of 10, sensitivity enhanced by a factor of 8 and faster rise and decay time. The enhanced performance may be due to effective charge separation guided by the built-in potential formed at the interface between ZnO NRs and PEDOT:PSS.

  17. Low-Temperature Growth of Well-Aligned ZnO Nanorod Arrays by Chemical Bath Deposition for Schottky Diode Application

    NASA Astrophysics Data System (ADS)

    Yuan, Zhaolin

    2015-04-01

    A well-aligned ZnO nanorod array (ZNRA) was successfully grown on an indium tin oxide (ITO) substrate by chemical bath deposition at low temperature. The morphology, crystalline structure, transmittance spectrum and photoluminescence spectrum of as-grown ZNRA were investigated by field emission scanning electron microscopy, x-ray diffraction, ultraviolet-visible spectroscopy and spectrophotometer, respectively. The results of these measurements showed that the ZNRA contained densely packed, aligned nanorods with diameters from 30 nm to 40 nm and a wurtzite structure. The ZNRA exhibited good optical transparency within the visible spectral range, with >80% transmission. Gold (Au) was deposited on top of the ZNRA, and the current-voltage characteristics of the resulting ITO/ZNRA/Au device in the dark were evaluated in detail. The ITO/ZNRA/Au device acted as a Schottky barrier diode with rectifying behaviour, low turn-on voltage (0.6 V), small reverse-bias saturation current (3.73 × 10-6 A), a high ideality factor (3.75), and a reasonable barrier height (0.65 V) between the ZNRA and Au.

  18. Surface-assisted unidirectional orientation of ZnO nanorods hybridized with nematic liquid crystals.

    PubMed

    Kubo, Shoichi; Taguchi, Rei; Hadano, Shingo; Narita, Mamiko; Watanabe, Osamu; Iyoda, Tomokazu; Nakagawa, Masaru

    2014-01-22

    Inorganic semiconductor nanorods are regarded as the primary components of optical and electrical nanoscale devices. In this paper, we demonstrate the unidirectional alignment of monolayered and dispersed ZnO nanorods on a rubbed polyimide alignment layer, which was achieved by a conventional liquid crystal alignment technique. The outermost surfaces of the ZnO nanorods (average diameter 7 nm; length 50 nm) were modified by polymerization initiator moieties, and nematic liquid crystalline (LC) methacrylate polymers were grown by atom transfer radical polymerization. By regulating the densities of the polymerization initiator moieties, we successfully hybridized LC-polymer-grafted ZnO nanorods and small nematic LC molecules. The LC-polymer-modified ZnO nanorods were hierarchically aligned on the substrate via cooperative molecular interactions among the liquid crystal mesogens, which induced molecular orientation on the rubbed polyimide alignment layer. PMID:24299205

  19. Orientation-Dependent Structural Properties and Growth Mechanism of ZnO Nanorods

    NASA Astrophysics Data System (ADS)

    Yu, H.-J.; Jeong, E.-S.; Park, S.-H.; Seo, S.-Y.; Kim, S.-H.; Han, S.-W.

    2007-01-01

    We present the local structural properties of ZnO nanorods studied by using extended x-ray absorption fine structure (EXAFS). Vertically aligned ZnO nanorods were fabricated on Al2O3 substrates by a catalyst free metal organic chemical vapor deposition (MOCVD). The polarized EXAFS measurements on the ZnO nanorods were performed at Zn K-edge. The polarized EXAFS study revealed that the nanorods had a wurtzite structure, and that there were substantial amount of structural disorders in Zn-O pairs in the beginning of the nanorod growth. The EXAFS measurements revealed that the orientation-dependent disorders of the Zn-O pairs were directly related to the growth mechanism and crystal quality of the ZnO nanorods.

  20. Gold coated ZnO nanorod biosensor for glucose detection

    NASA Astrophysics Data System (ADS)

    Bhattacharya, Anuradha; Jain, Chhavi; Rao, V. Padmanapan; Banerjee, S.

    2012-06-01

    Gold coated ZnO nanorod based biosensor has been fabricated for its glucose detecting abilities and compared with that of ZnO nanorod based biosensor. SEM images of electrochemically grown ZnO nanorods show hexagonally grown ZnO nanorods on an ITO substrate. Electrochemical analysis show that gold coated ZnO based biosensors have higher sensitivity, lower limit of detection and a wider linear range for glucose detection. The results demonstrate that gold coated ZnO nanorod based biosensors are a promising material for biosensor applications over single component ZnO nanorod based biosensor.

  1. Temperature dependence of the growth of ZnO nanorod arrays by electrochemical deposition

    NASA Astrophysics Data System (ADS)

    Kim, Hyunghoon; Moon, Jin Young; Lee, Ho Seong

    2011-03-01

    ZnO nanorod arrays were prepared by the electrochemical deposition route on conductive Au/Si substrates. The effect of the bath temperature on the growth of the ZnO nanorod arrays was investigated. With an increase in bath temperature from 30°C to 80°C, the deposited ZnO changed from an amorphous structure to a hexagonal crystal structure. The ZnO nanorod arrays grown above 50°C were dense and vertically well-aligned. Scanning and transmission electron microscopy results showed that the diameter of the hexagon-shaped ZnO nanorod arrays ranged from 100 nm to 180 nm and the length was about 500 nm. On the basis of the characteristics of the ZnO crystal structure and the effect of the bath temperature, the growth mechanism is described.

  2. ZnO nanorod-templated well-aligned ZrO2 nanotube arrays for fibroblast adhesion and proliferation

    NASA Astrophysics Data System (ADS)

    Lu, Zhisong; Zhu, Zhihong; Liu, Jinping; Hu, Weihua; Li, Chang Ming

    2014-05-01

    Cellular responses to porous tubular structures have recently been investigated in highly ordered ZrO2 nanotube arrays fabricated with anodization. However, the potential applications of the nanotube arrays are hindered by instrument requirements and substrate limitations, as well as by the complicated processes needed for synthesis. In this work, ZrO2 nanotube arrays were synthesized by in situ hydrolysis of zirconium propoxide with a zinc oxide nanorod array-based template. Fibroblast cells were able to grow on the nanotube array surface with produced elongated filopodia. Studies of the capability of cell growth and the expression of adhesion- and proliferation-related genes reveal that ZrO2 nanotube arrays may provide a better environment for cell adhesion and growth than a flat titanium surface. These findings not only provide fundamental insight into cell response to nanostructures but also provide an opportunity to use a unique approach to fabricate ZrO2 nanotube array structures for potential implant applications.

  3. Electrical conduction and NO2 gas sensing properties of ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Şahin, Yasin; Öztürk, Sadullah; Kılınç, Necmettin; Kösemen, Arif; Erkovan, Mustafa; Öztürk, Zafer Ziya

    2014-06-01

    Thermally stimulated current (TSC), photoresponse and gas sensing properties of zinc oxide (ZnO) nanorods were investigated depending on heating rates, illumination and dark aging times with using sandwich type electrode system. Vertically aligned ZnO nanorods were grown on indium tin oxide (ITO) coated glass substrate by hydrothermal process. TSC measurements were performed at different heating rates under constant potential. Photoresponse and gas sensing properties were investigated in dry air ambient at 200 °C. For gas sensing measurements, ZnO nanorods were exposed to NO2 (100 ppb to 1 ppm) in dark and illuminated conditions and the resulting resistance transient was recorded. It was found from dark electrical measurements that the dependence of the dc conductivity on temperature followed Mott's variable range hopping (VRH) model. In addition, response time and recovery times of ZnO nanorods to NO2 gas decreased by exposing to white light.

  4. Synthesis and characterization of Cu-doped ZnO nanorods chemically grown on flexible substrate

    NASA Astrophysics Data System (ADS)

    Shabannia, R.

    2016-08-01

    Vertically aligned undoped and Cu-doped ZnO nanorods array were successfully grown on flexible substrate by chemical bath deposition method at a low 0074emperature. The fabricated materials were characterized using X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX) and photoluminescence (PL) spectroscopy. XRD analysis showed that Cu doping improves the crystallinity of the fabricated ZnO nanorods. The mean diameter and bending of the ZnO nanorods increase with an increase of Cu doping, but the density of Cu-doped ZnO nanorods almost unchanged. Room temperature PL measurement displayed increased intensity in UV peak and decreased visible peak after Cu doping.

  5. Effect of Metallic Au Seed Layer Annealing on the Properties of Electrodeposited ZnO Nanorods.

    PubMed

    Park, Youngbin; Nam, Giwoong; Kim, Byunggu; Leem, Jae-Young

    2015-11-01

    This study focuses on the effect of annealing the Au seed layer (ASL) on the structural and optical properties of electrodeposited ZnO nanorods. ZnO nanorods were fabricated in a three-step approach. In the first step, ASLs were deposited using an ion sputter technique. In the second step, layers were annealed in air at various temperatures ranging from 400 degrees C to 600 degrees C. Finally, ZnO nanorods were grown using an electrodeposition method. The field-emission scanning electron microscopy analysis showed that better aligned ZnO nanorods are fabricated on the annealed ASL compared with non-annealed ASL The X-ray diffraction analysis showed a notable improvement in directional growth along the (002) crystallographic plane when ZnO nanorods were grown on the annealed ASL. The photoluminescence analysis showed that the UV emission peak of ZnO nanorods on the annealed ASL at 400 degrees C was blue-shifted and increased. PMID:26726551

  6. Selective growth of hierarchical ZnO nanorod arrays on the graphene nanosheets

    NASA Astrophysics Data System (ADS)

    Yang, Hui; Li, Lan; Li, Jinliang; Mo, Zhaojun

    2016-01-01

    We report directly selective-area grown (SAG) high-quality hierarchical ZnO nanorod arrays on the graphene nanosheets without invoking damage or introducing a catalyst. The SAG behavior in the non-catalytic growth mechanism is attributed to dangling bonds on the boundary edges of graphene nanosheets, which serve as the preferential adsorption and nucleation sites of ZnO nanorod. High densities of hierarchical ZnO nanorods show single-crystalline hexagonal wurtzite structure and are vertically well-aligned on the graphene nanosheets, with the diameter and the density strongly dependent on the growth temperature. Furthermore, no carbon impurity can be seen in the tips of the ZnO nanorods and also no carbon-related defect peak in the 10 K PL spectrum of ZnO nanorods. Our approach using a graphene-nanosheet substrate provides an efficient route for the growth of high-quality ZnO with a one-dimensional (1D) hierarchical nanostructure, which is highly desirable for fabricating 1D ZnO hybrid optoelectronic devices, particularly for a fast-response UV photodetector and highly-sensitive gas sensor.

  7. Effect of ZnO seed layer on the morphology and optical properties of ZnO nanorods grown on GaN buffer layers

    SciTech Connect

    Nandi, R. Mohan, S. Major, S. S.; Srinivasa, R. S.

    2014-04-24

    ZnO nanorods were grown by chemical bath deposition on sputtered, polycrystalline GaN buffer layers with and without ZnO seed layer. Scanning electron microscopy and X-ray diffraction show that the ZnO nanorods on GaN buffer layers are not vertically well aligned. Photoluminescence spectrum of ZnO nanorods grown on GaN buffer layer, however exhibits a much stronger near-band-edge emission and negligible defect emission, compared to the nanorods grown on ZnO buffer layer. These features are attributed to gallium incorporation at the ZnO-GaN interface. The introduction of a thin (25 nm) ZnO seed layer on GaN buffer layer significantly improves the morphology and vertical alignment of ZnO-NRs without sacrificing the high optical quality of ZnO nanorods on GaN buffer layer. The presence of a thick (200 nm) ZnO seed layer completely masks the effect of the underlying GaN buffer layer on the morphology and optical properties of nanorods.

  8. Photoactive area modification in bulk heterojunction organic solar cells using optimization of electrochemically synthesized ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Mehdi, Ahmadi; Sajjad Rashidi, Dafeh

    2015-11-01

    In this work, ZnO nanorod arrays grown by an electrochemical deposition method are investigated. The crucial parameters of length, diameter, and density of the nanorods are optimized over the synthesize process and nanorods growth time. Crystalline structure, morphologies, and optical properties of ZnO nanorod arrays are studied by different techniques such as x-ray diffraction, scanning electron microscope, atomic force microscope, and UV-visible transmission spectra. The ZnO nanorod arrays are employed in an inverted bulk heterojunction organic solar cell of Poly (3-hexylthiophene):[6-6] Phenyl-(6) butyric acid methyl ester to introduce more surface contact between the electron transporter layer and the active layer. Our results show that the deposition time is a very important factor to achieve the aligned and uniform ZnO nanorods with suitable surface density which is required for effective infiltration of active area into the ZnO nanorod spacing and make a maximum interfacial surface contact for electron collection, as overgrowing causes nanorods to be too dense and thick and results in high resistance and lower visible light transmittance. By optimizing the thickness of the active layer on top of ZnO nanorods, an improved efficiency of 3.17% with a high FF beyond 60% was achieved.

  9. Low-temperature growth of well-aligned zinc oxide nanorod arrays on silicon substrate and their photocatalytic application

    PubMed Central

    Azam, Ameer; Babkair, Saeed Salem

    2014-01-01

    Well-aligned and single-crystalline zinc oxide (ZnO) nanorod arrays were grown on silicon (Si) substrate using a wet chemical route for the photodegradation of organic dyes. Structural analysis using X-ray diffraction, high-resolution transmission electron microscopy, and selected area electron diffraction confirmed the formation of ZnO nanorods grown preferentially oriented in the (001) direction and with a single phase nature with a wurtzite structure. Field emission scanning electron microscopy and transmission electron microscopy micrographs showed that the length and diameter of the well-aligned rods were about ~350–400 nm and ~80–90 nm, respectively. Raman scattering spectra of ZnO nanorod arrays revealed the characteristic E2 (high) mode that is related to the vibration of oxygen atoms in the wurtzite ZnO. The photodegradation of methylene blue (MB) using ZnO nanorod arrays was performed under ultraviolet light irradiation. The results of photodegradation showed that ZnO nanorod arrays were capable of degrading ~80% of MB within 60 minutes of irradiation, whereas ~92% of degradation was achieved in 120 minutes. Complete degradation of MB was observed after 270 minutes of irradiation time. Owing to enhanced photocatalytic degradation efficiency and low-temperature growth method, prepared ZnO nanorod arrays may open up the possibility for the successful utilization of ZnO nanorod arrays as a future photocatalyst for environmental remediation. PMID:24812511

  10. Local structural properties of Co-ion-implanted ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Park, C. I.; Jin, Zhenlan; Jeong, E. S.; Hwang, I. H.; Han, S. W.

    2013-12-01

    We examined the local structural properties around Co and Zn ions in Co-ion-implanted ZnO nanorods by using an X-ray absorption fine structure (XAFS) analysis. Vertically-aligned ZnO nanorods were synthesized on Al2O3 substrates by using a catalyst-free metal-organic chemicalvapor deposition. Co ions (Co+ and Co2+) with energies of 50 and 100 keV and fluxes of 1013 and 1015 particles/cm2 were implanted in the ZnO nanorods, and the ion-implanted ZnO nanorods were annealed at 400-650°C. X-ray absorption near edge structure (XANES) analyses demonstrated that the chemical valence state of the Co ions were mostly 2+. An extended XAFS (EXAFS) analysis revealed that the Co ions were mostly substituted at the Zn sites of ZnO nanorods at a Coion flux of 1015 particles/cm2. However, at a flux of 1013 particles/cm2, Co ions formed Co-O and Co-Co clusters. These results were in contrast to the Co distribution in Co-added ZnO predicted by using a Monte Carlo method.

  11. Polarized Raman scattering of single ZnO nanorod

    SciTech Connect

    Yu, J. L. Lai, Y. F. Wang, Y. Z.; Cheng, S. Y.

    2014-01-21

    Polarized Raman scattering measurement on single wurtzite c-plane (001) ZnO nanorod grown by hydrothermal method has been performed at room temperature. The polarization dependence of the intensity of the Raman scattering for the phonon modes A{sub 1}(TO), E{sub 1}(TO), and E{sub 2}{sup high} in the ZnO nanorod are obtained. The deviations of polarization-dependent Raman spectroscopy from the prediction of Raman selection rules are observed, which can be attributed to the structure defects in the ZnO nanorod as confirmed by the comparison of the transmission electron microscopy, photoluminescence spectra as well as the polarization dependent Raman signal of the annealed and unannealed ZnO nanorod. The Raman tensor elements of A{sub 1}(TO) and E{sub 1}(TO) phonon modes normalized to that of the E{sub 2}{sup high} phonon mode are |a/d|=0.32±0.01, |b/d|=0.49±0.02, and |c/d|=0.23±0.01 for the unannealed ZnO nanorod, and |a/d|=0.33±0.01, |b/d|=0.45±0.01, and |c/d|=0.20±0.01 for the annealed ZnO nanorod, which shows strong anisotropy compared to that of bulk ZnO epilayer.

  12. VLS-like growth and characterizations of dense ZnO nanorods grown by e-beam process

    NASA Astrophysics Data System (ADS)

    Agarwal, D. C.; Chauhan, R. S.; Avasthi, D. K.; Sulania, I.; Kabiraj, D.; Thakur, P.; Chae, K. H.; Chawla, Amit; Chandra, R.; Ogale, S. B.; Pellegrini, G.; Mazzoldi, P.

    2009-02-01

    We present a new approach to produce ZnO nanorods in a reproducible manner at a temperature lower than other physical vapour deposition techniques, such as the vapour-liquid-solid mechanism. Arrays of well-aligned ZnO nanorods of uniform diameter have been synthesized on the Si substrate precoated with Au, using a simple electron beam evaporation method without the flow of any carrier gas. Scanning electron microscopy and atomic force microscopy characterizations show that as-grown nanorods are well aligned and uniform in diameter. X-ray diffraction measurements and clear lattice fringes in high-resolution transmission electron microscopy image show the growth of good quality polycrystalline hexagonal ZnO nanorods and a lang0 0 2rang growth direction. The polarization-dependent studies of near edge x-ray absorption fine structure (NEXAFS) are performed to investigate the electronic structure of the zinc and oxygen ions. The analysis of NEXAFS spectra at different angles of incidence of photon flux indicates the formation of ZnO nanorods having anisotropic behaviour of O and Zn states. The photoluminescence spectrum exhibits strong ultraviolet emission at 385 nm and the UV-visible spectrum also shows a band-gap transition around 390 nm indicating the good quality of nanorods. The catalytic growth mechanism of the ZnO nanorods is discussed on the basis of experimental results in this work.

  13. Hydrodynamic fabrication of structurally gradient ZnO nanorods.

    PubMed

    Kim, Hyung Min; Youn, Jae Ryoun; Song, Young Seok

    2016-02-26

    We studied a new approach where structurally gradient nanostructures were fabricated by means of hydrodynamics. Zinc oxide (ZnO) nanorods were synthesized in a drag-driven rotational flow in a controlled manner. The structural characteristics of nanorods such as orientation and diameter were determined by momentum and mass transfer at the substrate surface. The nucleation of ZnO was induced by shear stress which plays a key role in determining the orientation of ZnO nanorods. The nucleation and growth of such nanostructures were modeled theoretically and analyzed numerically to understand the underlying physics of the fabrication of nanostructures controlled by hydrodynamics. The findings demonstrated that the precise control of momentum and mass transfer enabled the formation of ZnO nanorods with a structural gradient in diameter and orientation. PMID:26807679

  14. Memristive switching of ZnO nanorod mesh

    NASA Astrophysics Data System (ADS)

    Yevgeniy, Puzyrev; Shen, Xiao; Ni, Kai; Zhang, Xuan; Hachtel, Jordan; Choi, Bo; Chisholm, Matthew; Fleetwood, Daniel; Schrimpf, Ronald; Pantelides, Sokrates

    We present a combined experimental and theoretical study of memristive switching in a self-assembled mesh of ZnO nanorods. A ZnO nanorod mesh spans the area between Ag contacts in a device that exhibits hysteresis with large ON/OFF ratio, reaching ION/IOFF values of 104. We show that switching behavior depends critically on the geometry of the nanorod mesh. We employ density functional theory (DFT) calculations to deduce the mechanism for resistive switching for the nanorod mesh. Redistribution of Ag atoms, driven by an electrical field, leads to the formation and evolution of a conducting path through nanorods. Field-induced migration of Ag atoms changes the doping level of nanorods and modulates their conductivity. Using static DFT and nudged-elastic-band calculations, we investigate the energy of interaction between Ag clusters and a ZnO surface, including migration barriers of Ag atoms. Current-voltage (I-V) characteristics are modeled using percolation theory in a nanorod mesh. To describe the dynamics of SET/RESET phenomena, model parameters include the experimentally observed nanorod geometry and the energetics of Ag on ZnO surfaces, obtained from DFT calculations. This work was supported by NSF Grant DMR-1207241, DOE Grant DE-FG02-09ER46554, and the McMinn Endowment at Vanderbilt University. Computational support was provided by the NSF XSEDE under Grant #DMR TG-DMR130121.

  15. General Route to ZnO Nanorod Arrays on Conducting Substrates via Galvanic-cell-based approach

    NASA Astrophysics Data System (ADS)

    Zheng, Zhaoke; Lim, Zhi Shiuh; Peng, Yuan; You, Lu; Chen, Lang; Wang, Junling

    2013-08-01

    Wurtzite ZnO nanorod exhibits many unique properties, which make it promising for various optoelectronic applications. To grow well-aligned ZnO nanorod arrays on various substrates, a seed layer is usually required to improve the density and vertical alignment. The reported works about seedless hydrothermal synthesis either require special substrates, or require external electrical field to enhance the ZnO nucleation. Here, we report a general method for the one-pot synthesis of homogenous and well-aligned ZnO nanorods on common conducting substrates without a seed layer. This method, based on the galvanic-cell structure, makes use of the contact potential between different materials as the driving force for ZnO growth. It is applicable to different conducting substrates at low temperature. More importantly, the as-grown ZnO nanorods show enhanced photoelectric response. This unique large scale low-temperature processing method could be of great importance for the application of ZnO nanostructures.

  16. The effect of growth temperature of seed layer on the structural and optical properties of ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Gautam, Khyati; Singh, Inderpreet; Bhatnagar, P. K.; Peta, Koteswara Rao

    2016-05-01

    The structural and optical properties of ZnO nanorods are investigated as a function of growth temperature of the seed layer. The seed layer comprising of ZnO nanocrystallites is grown on ITO substrates at five different temperatures (150-550 °C) and the nanorods are grown on the seed layer by the facile hydrothermal method. The seed layer grown at 350 °C is observed to be uniformly textured with c-axis orientation leading to the synthesis of vertically aligned nanorods with smaller diameter. The HR-TEM analysis and the intense peak along (002) direction in the XRD spectra of this sample implied that the nanorods possess c-axis orientation. An enhanced UV emission is also observed in the photoluminescence spectra of this sample. The diversity in the morphology and orientation of the seeds at different temperatures has been explained by the growth kinetics of the ZnO nanocrystallites.

  17. Fabrication and characterization of silicon wire solar cells having ZnO nanorod antireflection coating on Al-doped ZnO seed layer

    PubMed Central

    2012-01-01

    In this study, we have fabricated and characterized the silicon [Si] wire solar cells with conformal ZnO nanorod antireflection coating [ARC] grown on a Al-doped ZnO [AZO] seed layer. Vertically aligned Si wire arrays were fabricated by electrochemical etching and, the p-n junction was prepared by spin-on dopant diffusion method. Hydrothermal growth of the ZnO nanorods was followed by AZO film deposition on high aspect ratio Si microwire arrays by atomic layer deposition [ALD]. The introduction of an ALD-deposited AZO film on Si wire arrays not only helps to create the ZnO nanorod arrays, but also has a strong impact on the reduction of surface recombination. The reflectance spectra show that ZnO nanorods were used as an efficient ARC to enhance light absorption by multiple scattering. Also, from the current-voltage results, we found that the combination of the AZO film and ZnO nanorods on Si wire solar cells leads to an increased power conversion efficiency by more than 27% compared to the cells without it. PMID:22222067

  18. High intensity, plasma-induced emission from large area ZnO nanorod array cathodes

    SciTech Connect

    Liao Qingliang; Yang Ya; Qi Junjie; Zhang Yue; Huang Yunhua; Qin Zi; Xia Liansheng

    2008-11-15

    High intensity electron emission cathodes based on a well-aligned ZnO nanorod array were fabricated. An investigation of the properties of the plasma and the electron beams produced by ZnO nanorod array cathodes was presented. Intense current electron beams were obtained from the cathodes. At an electric field of 7-8 V/{mu}m and pulse duration of {approx}100 ns, the highest emission current density reached 76-91 A/cm{sup 2}. The production mechanism of the electron beams was the plasma-induced emission. The morphology and structure of the ZnO nanorod after the application of the accelerating pulses were characterized. The plasma expanded at a velocity of about 10.7 cm/{mu}s during the pulse interval. Whether the emission currents are high or low, the plasma on the cathode surface were always distributed uniformly. The ZnO nanorod array cathodes are expected to be applied to high power vacuum electronic devices as electron beam sources.

  19. Fabrication and photovoltaic properties of ZnO nanorods/perovskite solar cells

    NASA Astrophysics Data System (ADS)

    Shirahata, Yasuhiro; Tanaike, Kohei; Akiyama, Tsuyoshi; Fujimoto, Kazuya; Suzuki, Atsushi; Balachandran, Jeyadevan; Oku, Takeo

    2016-02-01

    ZnO nanorods/perovskite solar cells with different lengths of ZnO nanorods were fabricated. The ZnO nanorods were prepared by chemical bath deposition and directly confirmed to be hexagon-shaped nanorods. The lengths of the ZnO nanorads were controlled by deposition condition of ZnO seed layer. Photovoltaic properties of the ZnO nanorods/CH3NH3PbI3 solar cells were investigated by measuring current density-voltage characteristics and incident photon to current conversion efficiency. The highest conversion efficiency was obtained in ZnO nanorods/CH3NH3PbI3 with the longest ZnO nanorods.

  20. Shape controllable synthesis of ZnO nanorod arrays via vapor phase growth

    NASA Astrophysics Data System (ADS)

    Sun, Xiaochen; Zhang, Hongzhou; Xu, Jun; Zhao, Qing; Wang, Rongming; Yu, Dapeng

    2004-03-01

    ZnO nanorod arrays with peculiar morphologies were synthesized on (111)-oriented Si substrate and glass via a vapor phase growth. The morphology of the individual nanorod can be flat-headed bottle-like, and needle-like, which depends on the deposition positions relative to the source materials in the presence of a controlling element Se. In addition, the arrays of all the three morphologies exhibit good alignment and high coverage. This fabrication technique can be also used to direct the controllable growth of other nanomaterials with similar morphologies.

  1. Spatially and angularly resolved cathodoluminescence study of single ZnO nanorods.

    PubMed

    Li, Chengyao; Gao, Min; Zhang, Xiaoxian; Peng, Lian-Mao; Chen, Qing

    2010-11-01

    Single ZnO nanorods were studied with cathodoluminescence at high spatial and angular resolution. A newly developed luminescence detector consisting a fiber probe controlled by a nano-manipulator is attached to a scanning electron microscope to carry out the cathodoluminescence measurements. Excitonic emission from the sidewalls and redshifted near band edge emission guided along the nanorod axis are observed as the fiber probe axis is aligned to be perpendicular and parallel to the nanorod axis, respectively, demonstrating the angular resolving power of the experimental setup and waveguiding behavior of the nanorods. High spatial resolution cathodoluminescence measurement shows that the near band edge emission can propagate parallel and perpendicular to the nanorod axis and an increased propagation distance results in more redshift of the guided luminescence. In addition, the high spatial resolution and temperature dependent cathodoluminescence measurements demonstrate the important role of free exciton-longitudinal optical phonon interaction in the waveguiding behavior and the propagation of the near band edge emission in ZnO nanorods. PMID:21137887

  2. Well-integrated ZnO nanorod arrays on conductive textiles by electrochemical synthesis and their physical properties

    PubMed Central

    2013-01-01

    We reported well-integrated zinc oxide (ZnO) nanorod arrays (NRAs) on conductive textiles (CTs) and their structural and optical properties. The integrated ZnO NRAs were synthesized by cathodic electrochemical deposition on the ZnO seed layer-coated CT substrate in ultrasonic bath. The ZnO NRAs were regularly and densely grown as well as vertically aligned on the overall surface of CT substrate, in comparison with the grown ZnO NRAs without ZnO seed layer or ultrasonication. Additionally, their morphologies and sizes can be efficiently controlled by changing the external cathodic voltage between the ZnO seed-coated CT substrate and the counter electrode. At an external cathodic voltage of −2 V, the photoluminescence property of ZnO NRAs was optimized with good crystallinity and high density. PMID:23316935

  3. Well-integrated ZnO nanorod arrays on conductive textiles by electrochemical synthesis and their physical properties.

    PubMed

    Ko, Yeong Hwan; Kim, Myung Sub; Park, Wook; Yu, Jae Su

    2013-01-01

    We reported well-integrated zinc oxide (ZnO) nanorod arrays (NRAs) on conductive textiles (CTs) and their structural and optical properties. The integrated ZnO NRAs were synthesized by cathodic electrochemical deposition on the ZnO seed layer-coated CT substrate in ultrasonic bath. The ZnO NRAs were regularly and densely grown as well as vertically aligned on the overall surface of CT substrate, in comparison with the grown ZnO NRAs without ZnO seed layer or ultrasonication. Additionally, their morphologies and sizes can be efficiently controlled by changing the external cathodic voltage between the ZnO seed-coated CT substrate and the counter electrode. At an external cathodic voltage of -2 V, the photoluminescence property of ZnO NRAs was optimized with good crystallinity and high density. PMID:23316935

  4. Well-integrated ZnO nanorod arrays on conductive textiles by electrochemical synthesis and their physical properties

    NASA Astrophysics Data System (ADS)

    Ko, Yeong Hwan; Kim, Myung Sub; Park, Wook; Yu, Jae Su

    2013-01-01

    We reported well-integrated zinc oxide (ZnO) nanorod arrays (NRAs) on conductive textiles (CTs) and their structural and optical properties. The integrated ZnO NRAs were synthesized by cathodic electrochemical deposition on the ZnO seed layer-coated CT substrate in ultrasonic bath. The ZnO NRAs were regularly and densely grown as well as vertically aligned on the overall surface of CT substrate, in comparison with the grown ZnO NRAs without ZnO seed layer or ultrasonication. Additionally, their morphologies and sizes can be efficiently controlled by changing the external cathodic voltage between the ZnO seed-coated CT substrate and the counter electrode. At an external cathodic voltage of -2 V, the photoluminescence property of ZnO NRAs was optimized with good crystallinity and high density.

  5. Effect of lattice strain on structural and optical properties of ZnO nanorods grown by hydrothermal method

    NASA Astrophysics Data System (ADS)

    Gautam, Khyati; Singh, Inderpreet; Nirwal, Varun Singh; Singh, Joginder; Peta, Koteswara Rao; Bhatnagar, P. K.

    2016-05-01

    In this work, we have synthesized ZnO nanorods over ZnO seeds/ITO/glass substrate by the facile hydrothermal method. ZnO seeds are grown at different temperatures ranging from 150°C to 550°C in steps of 100°C. We have studied the effect of strain on the structural and optical properties of ZnOnanorods. It was observed that the growth temperature of seed layer has an influence over the lattice strain present in the nanorods. The as synthesized nanorods were characterized by scanning electron microscope (SEM), x-ray diffraction (XRD) and photoluminescence (PL). SEM images confirm the formation of dense arrays of vertically aligned nanorods on seeds which are grown at 350°C. In addition to this, XRD patterns reveal that these ZnO nanorods are preferentially oriented along (002) direction. The strain analysis based on the XRD results reveals that the minimum value of strain is obtained at 350°C which is attributed to the improved crystalline quality of the interface of seed layer and nanorods leading to their c-axis alignment and enhancement of ultraviolet emission as observed in the PL spectra.

  6. Ultra-violet Sensing Characteristic and Field Emission Properties of Vertically Aligned Aluminum Doped Zinc Oxide Nanorod Arrays

    SciTech Connect

    Mamat, M. H.; Malek, M. F.; Musa, M. Z.; Khusaimi, Z.; Rusop, M.

    2011-05-25

    Ultra-violet (UV) sensing behavior and field emission characteristic have been investigated on vertically aligned aluminum (Al) doped zinc oxide (ZnO) nanorod arrays prepared using sol-gel immersion method. Uniform and high coverage density of ZnO nanorod arrays have been successfully deposited on seeded-catalyst coated substrates. The synthesized nanorods have diameter sizes between 50 nm to 150 nm. The XRD spectra show Al doped ZnO nanorod array has high crystallinity properties with the dominancy of crystal growth along (002) plane or c-axis. UV photoresponse measurement indicates that Al doped ZnO nanorod array sensitively detects UV light as shown by conductance increment after UV illumination exposure. The nanorod array shows good field emission properties with low turn on field and threshold field at 2.1 V/{mu}m and 5.6 V/{mu}m, respectively. The result suggested that Al doped ZnO nanorod arrays prepared by low-cost sol-gel immersion method show promising result towards fabrication of multi applications especially in UV photoconductive sensor and field emission displays.

  7. Effect of bath temperature on surface morphology and photocatalytic activity of ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Sriharan, N.; Muthukumarasamy, N.; Senthil, T. S.

    2016-05-01

    ZnO nanorods were prepared by using simple hydrothermal method using four different bath temperatures. All the prepared ZnO nanorods are annealed at 450°C and are characterized by using various techniques such as X-ray diffraction, UV spectra and scanning electron microscopy. Photocatalytic activity of the prepared ZnO nanorods is analyzed. A novel photocatalytic reactor designed with ZnO nanorods prepared at 90°C shows enhanced catalytic efficiency. The role of light irradiation time, bath temperature and surface morphology of the ZnO nanorods on the performance of photocatalytic reaction is analyzed.

  8. Collective alignment of nanorods in thin Newtonian films

    NASA Astrophysics Data System (ADS)

    Gu, Yu; Burtovyy, Ruslan; Townsend, James; Owens, Jeffery; Luzinov, Igor; Kornev, Konstantin

    2013-11-01

    We provide a complete analytical description of the alignment kinetics of magnetic nanorods in magnetic field. Nickel nanorods were formed by template electrochemical deposition in alumina membranes from a dispersion in a water-glycerol mixture. To ensure uniformity of the dispersion, the surface of the nickel nanorods was covered with polyvinylpyrrolidone (PVP). A 40-70 nm coating prevented aggregation of nanoroda. These modifications allowed us to control alignment of the nanorods in a magnetic field and test the proposed theory. An orientational distribution function of nanorods was introduced. We demonstrated that the 0.04% volume fraction of nanorods in the glycerol-water mixture behaves as a system of non-interacting particles. However, the kinetics of alignment of a nanorod assembly does not follow the predictions of the single-nanorod theory. The distribution function theory explains the kinetics of alignment of a nanorod assembly and shows the significance of the initial distribution of nanorods in the film. It can be used to develop an experimental protocol for controlled ordering of magnetic nanorods in thin films. This work was supported by the Air Force Office of Scientific Research, Grant numbers FA9550-12-1-0459 and FA8650-09-D-507 5900.

  9. Defect-free ZnO nanorods for low temperature hydrogen sensor applications

    SciTech Connect

    Ranwa, Sapana; Kumar, Mahesh; Kulriya, Pawan K.; Sahu, Vikas Kumar; Kukreja, L. M.

    2014-11-24

    Uniformly distributed and defect-free vertically aligned ZnO nanorods (NRs) with high aspect ratio are deposited on Si by sputtering technique. X-ray diffraction along with transmission electron microscopy studies confirmed the single crystalline wurtzite structure of ZnO. Absence of wide band emission in photoluminescence spectra showed defect-free growth of ZnO NRs which was further conformed by diamagnetic behavior of the NRs. H{sub 2} sensing mechanism based on the change in physical dimension of channel is proposed to explain the fast response (∼21.6 s) and recovery times (∼27 s) of ZnO NRs/Si/ZnO NRs sensors. Proposed H{sub 2} sensor operates at low temperature (∼70 °C) unlike the existing high temperature (>150 °C) sensors.

  10. Light emission from electrically stressed ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Lucera, Luca; Adnane, Lhacene; Cil, Kadir; Manthina, Venkata; Agrios, Alexander; Silva, Helena; Gokirmak, Ali

    2012-02-01

    Zinc oxide (ZnO) nanorods were grown on various substrates by a chemical growth process based on a ZnO seed solution, and starting from Zinc acetate (ZnAc) material. The nanorods were grown on insulating silicon (low doped) and oxidized silicon substrates, and also over patterned conducting (highly-doped) nanocrystalline silicon microwires. When high voltage is applied directly to the ZnO film using tungsten needles (˜ 50-60 V across ˜ 5-10 μm), high intensity blue and white light emission is observed, both in air and under high vacuum (10-4 - 10-5 Torr). Blue light appears as broad bright flashes covering a large area whereas white light is more localized and appears to come from individual nanostructures. The results suggest a combination of electroluminescence and photoluminescence processes that take place after an electrical breakdown (possibly across individual ZnO nanorods) that is observed as an exponential increase in current. Percolative conduction and light paths are also observed during the measurements. Measurements of the ZnO films of rods on conducting silicon substrate give more repeatable results, likely due to the higher probability of conducting paths between the two probes. The electrical stress results in significant self-heating and modification of the ZnO nanostructures and the contacts.[4pt] [1] Greene L. E. et al. Solution-Grown Zinc oxide nanowires. Innorganic Chemistry. Vol 45. 7535-7543. (2006)

  11. Noble metal nanodisks epitaxially formed on ZnO nanorods and their effect on photoluminescence

    NASA Astrophysics Data System (ADS)

    Chu, Sheng; Ren, Jingjian; Yan, Dong; Huang, Jian; Liu, Jianlin

    2012-07-01

    Triangular and hexagonal shaped noble metal (Au, Ag, Pt, Pd) nanodisks were synthesized on the top facets of ZnO nanorods via simple deposition-annealing method. Other metals (Ni, Cu, Cr, Pb, Al) only formed irregular shaped nanostructures on ZnO nanorods. The morphology, elemental composition, as well as growth mechanism of the metal nanodisks/ZnO nanorod composite materials were studied. The localized surface plasmon resonant effects from different metal nanodisks on the photoluminescence of ZnO nanorods were investigated. It was demonstrated that the carriers transfer between the metal nanodisks and ZnO can efficiently manipulate the photoluminescence intensities from the nanorods.

  12. Electrochemical growth of ZnO nano-rods on polycrystalline Zn foil

    NASA Astrophysics Data System (ADS)

    Wong, M. H.; Berenov, A.; Qi, X.; Kappers, M. J.; Barber, Z. H.; Illy, B.; Lockman, Z.; Ryan, M. P.; MacManus-Driscoll, J. L.

    2003-09-01

    ZnO nano-rods were grown on polycrystalline Zn foil by cathodic electrodeposition in an aqueous zinc chloride/calcium chloride solution at 80°C. Variations in the solution concentration and substrate surface preparation were explored to shed light on the nucleation of the nano-rods. It was found that the nano-rod diameter increased with increasing solution concentration. Rolling striations and native ZnO on the surface of the Zn appeared to enhance nucleation and allowed more highly aligned, dense structures to be grown. By using low solution concentrations (5.0 × 10-4 M ZnCl 2) and non-electropolished Zn substrates, well faceted, hexagonal nano-rod structures of dimension ~80 nm diameter and >1 µm length were obtained. X-ray studies showed the samples to be highly aligned but containing a Zn-oxychloride impurity phase. Annealing caused the impurity phase to disappear and resulted in the films having a sharp photoluminescence double peak at 380/396 nm.

  13. The study of light waveguide effects on ZnO nanorod arrays

    NASA Astrophysics Data System (ADS)

    Kim, Tae-Un; Gang, Myeng-Gil; Kim, Jin-A.; Moon, Jong-Ha; Kim, Doo-Gun; Kim, Seon-Hoon; Ki, Hyun-Chul; Choi, Ju-hyeon; Kim, Jin-Hyeok

    2016-03-01

    Two different types of ZnO nanorods (hexagonal pyramid-shaped nanorod and hexagonal prism-shaped nanorod) were integrated on light emitting diodes (LEDs) for the investigation of light waveguide effects, which were evaluated using electroluminescence (EL) and current-voltage ( I- V) characteristics. EL intensity in LEDs with hexagonal prism-shaped ZnO nanorod arrays were improved by 18% while EL intensity in LEDs with hexagonal pyramid-shaped ZnO nanorods were reduced by 25% compared to bare LEDs. 3D-finite dimension time domain (3D-FDTD) programs were used to simulate the light waveguide effect on the two different shapes of ZnO nanorods. In addition, photonic crystals (PCs) effects in ZnO nanorod arrays were simulated to verify the light waveguide effect. It was found that light in a hexagonal prism-shaped ZnO nanorod propagated from the bottom to the top end. However, the light in a hexagonal pyramid-shaped ZnO nanorod was dissipated on the lateral face. The light extraction efficiency in ZnO nanorod arrays was dominated by the top end shape and planar density of ZnO nanorods. [Figure not available: see fulltext.

  14. Buckling and mechanical instability of ZnO nanorods grown on different substrates under uniaxial compression.

    PubMed

    Riaz, M; Fulati, A; Zhao, Q X; Nur, O; Willander, M; Klason, P

    2008-10-15

    Mechanical instability and buckling characterization of vertically aligned single-crystal ZnO nanorods grown on different substrates including Si, SiC and sapphire (α-Al(2)O(3)) was done quantitatively by the nanoindentation technique. The nanorods were grown on these substrates by the vapor-liquid-solid (VLS) method. The critical load for the ZnO nanorods grown on the Si, SiC and Al(2)O(3) substrates was found to be 188, 205 and 130 µN, respectively. These observed critical loads were for nanorods with 280 nm diameters and 900 nm length using Si as a substrate, while the corresponding values were 330 nm, 3300 nm, and 780 nm, 3000 nm in the case of SiC and Al(2)O(3) substrates, respectively. The corresponding buckling energies calculated from the force displacement curves were 8.46 × 10(-12), 1.158 × 10(-11) and 1.092 × 10(-11) J, respectively. Based on the Euler model for long nanorods and the J B Johnson model (which is an extension of the Euler model) for intermediate nanorods, the modulus of elasticity of a single rod was calculated for each sample. Finally, the critical buckling stress and strain were also calculated for all samples. We found that the buckling characteristic is strongly dependent on the quality, lattice mismatch and adhesion of the nanorods with the substrate. PMID:21832659

  15. Fabrication and Characterization of ZnO Nanorods on Multiple Substrates.

    PubMed

    Rana, Abu ul Hassan Sarwar; Ko, Kyul; Hong, Sejun; Kang, Mingi; Kim, Hyun-Seok

    2015-11-01

    In this study, we present the fabrication and characterization of ZnO nanorods (NRs) grown on p-Si, gold (Au) and nickel (Ni) coated on Si wafer, indium tin oxide (ITO), and quartz substrates. The aqueous chemical growth method is used for the vertical growth of ZnO NRs on multiple substrates. The samples are characterized with scanning electron microscope and energy dispersive X-ray spectroscopy to probe into the growth, alignment, density, diameter, and length of ZnO NRs on multiple substrates. It is found that under same conditions, like growth temperature, growth time, and solution concentration, ZnO NRs on ITO and quartz have same length but comparatively larger diameter than on other samples. The effects of growth time on the diameter and length of ZnO NRs are also explored. All the samples are characterized with probe station to look at the current-voltage (I-V) behavior of ZnO NRs on multiple substrates. It is found that ZnO NRs on p-Si show a simple p-n heterojunction diode like behavior. ZnO NRs grown on Au- and Ni-coated Si wafers show Schottky I-V characteristic behaviors while ZnO NRs on ITO show a simple ohmic I-V response with comparatively higher level of current. Finally, the I-V response of ZnO NRs on p-Si is also studied under ultraviolet illumination. Because of the photo-generated carriers in ZnO, the sample shows higher level of current upon illumination. PMID:26726520

  16. Impurity induced crystallinity and optical emissions in ZnO nanorod arrays

    NASA Astrophysics Data System (ADS)

    Panda, N. R.; Acharya, B. S.

    2015-01-01

    We report the growth of ZnO nanocrystallites doped with impurities such as B, N and S by green chemistry route using ultrasound. The effect of intrinsic defects and impurity doping on the structural and optical properties of ZnO nanostructures has been studied and discussed. Characterization studies carried out using x-ray diffraction (XRD) reveal the change in lattice parameters and crystallinity of ZnO in the presence of dopant. This has been explained on the basis of the dopant substitution at regular anion and interstitial sites. Study on surface morphology by field emission scanning electron microscopy (FESEM) shows a change from particle-like structure to aligned nanorods nucleated at definite sites. Elemental analysis such as x-ray photon electron spectroscopy (XPS) has been carried out to ascertain the dopant configuration in ZnO. This has been corroborated by the results obtained from FTIR and Raman studies. UV-vis light absorption and PL studies show an expansion of the band gap which has been explained on the basis of Moss-Burstein shift in the electronic band gap of ZnO by impurity incorporation. The optical emissions corresponding to excitonic transition and defect centres present in the band gap of ZnO is found to shift towards lower/higher wavelength sides. New PL bands observed have been assigned to the transitions related to the impurity states present in the band gap of ZnO along with intrinsic defects.

  17. Detection of quantum well induced single degenerate-transition-dipoles in ZnO nanorods.

    PubMed

    Ghosh, Siddharth; Ghosh, Moumita; Seibt, Michael; Rao, G Mohan

    2016-02-01

    Quantifying and characterising atomic defects in nanocrystals is difficult and low-throughput using the existing methods such as high resolution transmission electron microscopy (HRTEM). In this article, using a defocused wide-field optical imaging technique, we demonstrate that a single ultrahigh-piezoelectric ZnO nanorod contains a single defect site. We model the observed dipole-emission patterns from optical imaging with a multi-dimensional dipole and find that the experimentally observed dipole pattern and model-calculated patterns are in excellent agreement. This agreement suggests the presence of vertically oriented degenerate-transition-dipoles in vertically aligned ZnO nanorods. The HRTEM of the ZnO nanorod shows the presence of a stacking fault, which generates a localised quantum well induced degenerate-transition-dipole. Finally, we elucidate that defocused wide-field imaging can be widely used to characterise defects in nanomaterials to answer many difficult questions concerning the performance of low-dimensional devices, such as in energy harvesting, advanced metal-oxide-semiconductor storage, and nanoelectromechanical and nanophotonic devices. PMID:26691877

  18. Alignment of gold nanorods by angular photothermal depletion

    SciTech Connect

    Taylor, Adam B.; Chow, Timothy T. Y.; Chon, James W. M.

    2014-02-24

    In this paper, we demonstrate that a high degree of alignment can be imposed upon randomly oriented gold nanorod films by angular photothermal depletion with linearly polarized laser irradiation. The photothermal reshaping of gold nanorods is observed to follow quadratic melting model rather than the threshold melting model, which distorts the angular and spectral hole created on 2D distribution map of nanorods to be an open crater shape. We have accounted these observations to the alignment procedures and demonstrated good agreement between experiment and simulations. The use of multiple laser depletion wavelengths allowed alignment criteria over a large range of aspect ratios, achieving 80% of the rods in the target angular range. We extend the technique to demonstrate post-alignment in a multilayer of randomly oriented gold nanorod films, with arbitrary control of alignment shown across the layers. Photothermal angular depletion alignment of gold nanorods is a simple, promising post-alignment method for creating future 3D or multilayer plasmonic nanorod based devices and structures.

  19. Controllable growth of ZnO nanorods via electrodeposition technique: towards UV photo-detection

    NASA Astrophysics Data System (ADS)

    Sarangi, S. N.

    2016-09-01

    An electro-chemical approach for controlled growth of seedless ZnO nanorods was investigated. Field emission scanning electron microscopy confirms ZnO nanorod morphology can be controlled by varying the electrodeposition duration. Increased growth time enhances the crystallinity of ZnO nanorods and releases the strain on ZnO nanorods, as revealed by x-ray diffraction analysis. A significant change in the near band gap and the defect level luminescence were observed for different growth time ZnO nanorods. The variation in zone-centre E 2 (high) optical phonon mode of ZnO nanorods was studied using micro-Raman measurements. The I–V characteristics of the ZnO nanorods potentially enable applications in UV photodetection even at very low voltage range. Photodetectors based on ZnO nanorods have a faster response time (~29 s) and exhibited high photosensitivity, approximately 28 at 1 V forward bias, as compared to recent reported values. The results obtained are exciting in view of using a low cost electrodeposition technique at low temperature for achieving high-quality electrodeposited ZnO nanorods and its possible use in optoelectronic devices.

  20. UV and humidity sensing properties of ZnO nanorods prepared by the arc discharge method.

    PubMed

    Fang, F; Futter, J; Markwitz, A; Kennedy, J

    2009-06-17

    The UV and humidity sensing properties of ZnO nanorods prepared by arc discharge have been studied. Scanning electron microscopy and photoluminescence spectroscopy were carried out to analyze the morphology and optical properties of the as-synthesized ZnO nanorods. Proton induced x-ray emission was used to probe the impurities in the ZnO nanorods. A large quantity of high purity ZnO nanorod structures were obtained with lengths of 0.5-1 microm. The diameters of the as-synthesized ZnO nanorods were found to be between 40 and 400 nm. The nanorods interlace with each other, forming 3D networks which make them suitable for sensing application. The addition of a polymeric film-forming agent (BASF LUVISKOL VA 64) improved the conductivity, as it facilitates the construction of conducting networks. Ultrasonication helped to separate the ZnO nanorods and disperse them evenly through the polymeric agent. Improved photoconductivity was measured for a ZnO nanorod sensor annealed in air at 200 degrees C for 30 min. The ZnO nanorod sensors showed a UV-sensitive photoconduction, where the photocurrent increased by nearly four orders of magnitude from 2.7 x 10(-10) to 1.0 x 10(-6) A at 18 V under 340 nm UV illumination. High humidity sensitivity and good stability were also measured. The resistance of the ZnO nanorod sensor decreased almost linearly with increasing relative humidity (RH). The resistance of the ZnO nanorods changed by approximately five orders of magnitude from 4.35 x 10(11) Omega in dry air (7% RH) to about 4.95 x 10(6) Omega in 95% RH air. It is experimentally demonstrated that ZnO nanorods obtained by the arc discharge method show excellent performance and promise for applications in both UV and humidity sensors. PMID:19468159

  1. Diameter Control and Photoluminescence of ZnO Nanorods from Trialkylamines

    DOE PAGESBeta

    Andelman, Tamar; Gong, Yinyan; Neumark, Gertrude; O'Brien, Stephen

    2007-01-01

    A novel solution method to control the diameter of ZnO nanorods is reported. Small diameter (2-3 nm) nanorods were synthesized from trihexylamine, and large diameter (50–80 nm) nanorods were synthesized by increasing the alkyl chain length to tridodecylamine. The defect (green) emission of the photoluminescence (PL) spectra of the nanorods varies with diameter, and can thus be controlled by the diameter control. The small ZnO nanorods have strong green emission, while the large diameter nanorods exhibit a remarkably suppressed green band. We show that this observation supports surface oxygen vacancies as the defect that gives rise to the green emission.

  2. Comparative study of ZnO nanorods and thin films for chemical and biosensing applications and the development of ZnO nanorods based potentiometric strontium ion sensor

    NASA Astrophysics Data System (ADS)

    Khun, K.; Ibupoto, Z. H.; Chey, C. O.; Lu, Jun.; Nur, O.; Willander, M.

    2013-03-01

    In this study, the comparative study of ZnO nanorods and ZnO thin films were performed regarding the chemical and biosensing properties and also ZnO nanorods based strontium ion sensor is proposed. ZnO nanorods were grown on gold coated glass substrates by the hydrothermal growth method and the ZnO thin films were deposited by electro deposition technique. ZnO nanorods and thin films were characterised by field emission electron microscopy [FESEM] and X-ray diffraction [XRD] techniques and this study has shown that the grown nanostructures are highly dense, uniform and exhibited good crystal quality. Moreover, transmission electron microscopy [TEM] was used to investigate the quality of ZnO thin film and we observed that ZnO thin film was comprised of nano clusters. ZnO nanorods and thin films were functionalised with selective strontium ionophore salicylaldehyde thiosemicarbazone [ST] membrane, galactose oxidase, and lactate oxidase for the detection of strontium ion, galactose and L-lactic acid, respectively. The electrochemical response of both ZnO nanorods and thin films sensor devices was measured by using the potentiometric method. The strontium ion sensor has exhibited good characteristics with a sensitivity of 28.65 ± 0.52 mV/decade, for a wide range of concentrations from 1.00 × 10-6 to 5.00 × 10-2 M, selectivity, reproducibility, stability and fast response time of 10.00 s. The proposed strontium ion sensor was used as indicator electrode in the potentiometric titration of strontium ion versus ethylenediamine tetra acetic acid [EDTA]. This comparative study has shown that ZnO nanorods possessed better performance with high sensitivity and low limit of detection due to high surface area to volume ratio as compared to the flat surface of ZnO thin films.

  3. Plasmon-enhanced Electrically Light-emitting from ZnO Nanorod Arrays/p-GaN Heterostructure Devices

    PubMed Central

    Lu, Junfeng; Shi, Zengliang; Wang, Yueyue; Lin, Yi; Zhu, Qiuxiang; Tian, Zhengshan; Dai, Jun; Wang, Shufeng; Xu, Chunxiang

    2016-01-01

    Effective and bright light-emitting-diodes (LEDs) have attracted broad interests in fundamental research and industrial application, especially on short wavelength LEDs. In this paper, a well aligned ZnO nanorod arrays grown on the p-GaN substrate to form a heterostructured light-emitting diode and Al nanoparticles (NPs) were decorated to improve the electroluminescence performance. More than 30-folds enhancement of the electroluminescence intensity was obtained compared with the device without Al NPs decoration. The investigation on the stable and transient photoluminescence spectraof the ZnO nanorod arrays before and after Al NPs decoration demonstrated that the metal surface plasmon resonance coupling with excitons of ZnO leads to the enhancement of the internal quantum efficiency (IQE). Our results provide aneffective approach to design novel optoelectronic devices such as light-emitting diodes and plasmonic nanolasers. PMID:27181337

  4. Plasmon-enhanced Electrically Light-emitting from ZnO Nanorod Arrays/p-GaN Heterostructure Devices.

    PubMed

    Lu, Junfeng; Shi, Zengliang; Wang, Yueyue; Lin, Yi; Zhu, Qiuxiang; Tian, Zhengshan; Dai, Jun; Wang, Shufeng; Xu, Chunxiang

    2016-01-01

    Effective and bright light-emitting-diodes (LEDs) have attracted broad interests in fundamental research and industrial application, especially on short wavelength LEDs. In this paper, a well aligned ZnO nanorod arrays grown on the p-GaN substrate to form a heterostructured light-emitting diode and Al nanoparticles (NPs) were decorated to improve the electroluminescence performance. More than 30-folds enhancement of the electroluminescence intensity was obtained compared with the device without Al NPs decoration. The investigation on the stable and transient photoluminescence spectraof the ZnO nanorod arrays before and after Al NPs decoration demonstrated that the metal surface plasmon resonance coupling with excitons of ZnO leads to the enhancement of the internal quantum efficiency (IQE). Our results provide aneffective approach to design novel optoelectronic devices such as light-emitting diodes and plasmonic nanolasers. PMID:27181337

  5. Photoluminescence of spray pyrolysis deposited ZnO nanorods

    PubMed Central

    2011-01-01

    Photoluminescence of highly structured ZnO layers comprising well-shaped hexagonal rods is presented. The ZnO rods (length 500-1,000 nm, diameter 100-300 nm) were grown in air onto a preheated soda-lime glass (SGL) or ITO/SGL substrate by low-cost chemical spray pyrolysis method using zinc chloride precursor solutions and growth temperatures in the range of 450-550°C. We report the effect of the variation in deposition parameters (substrate type, growth temperature, spray rate, solvent type) on the photoluminescence properties of the spray-deposited ZnO nanorods. A dominant near band edge (NBE) emission is observed at 300 K and at 10 K. High-resolution photoluminescence measurements at 10 K reveal fine structure of the NBE band with the dominant peaks related to the bound exciton transitions. It is found that all studied technological parameters affect the excitonic photoluminescence in ZnO nanorods. PACS: 78.55.Et, 81.15.Rs, 61.46.Km PMID:21711895

  6. Photoelectrochemical performance of CdS nanorods grafted vertically aligned TiO{sub 2} nanorods

    SciTech Connect

    Liu, Ya; Jiang, Jiangang; Xu, Quan; Li, Mingtao; Guo, Liejin

    2013-11-15

    Graphical abstract: - Highlights: • TiO{sub 2} nanorods/CdS nanorods composite samples were successfully achieved. • The photocurrent density increased by 100 percent compared with pure TiO{sub 2}. • Photocurrent density increase mechanism of this photoanode was also forecasted. - Abstract: In this study, TiO{sub 2} nanorods/CdS nanorods composite samples were successfully synthesized by grafting CdS nanorods on vertically aligned TiO{sub 2} nanorods. A two-step hydrothermal method was used to prepare the samples. Some properties of the samples, such as morphological, structural, and optical properties were characterized by energy-dispersive X-ray detection, field emission scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and ultraviolet-visible spectroscopy. Moreover, photoelectrochemical properties were studied via current-voltage and photocurrent spectrum measurements. The results showed that CdS nanorods grafted on top of TiO{sub 2} nanorods like a lawn. The amount grafted as well as the diameter and crystallinity of CdS nanorods increased first and then decreased as the grafting time increased, due to Ostwald ripening. Under the back-side illumination, the composite film with 2 h grafting time exhibited the highest photocurrent density which was almost twice of that of the pure TiO{sub 2} nanorods.

  7. Preparation of ZnO Nanorod/Graphene/ZnO Nanorod Epitaxial Double Heterostructure for Piezoelectrical Nanogenerator by Using Preheating Hydrothermal.

    PubMed

    Shin, Dong-Myeong; Kang, Seok Hee; Kim, Seongsu; Seung, Wanchul; Tsege, Ermias Libnedengel; Kim, Sang-Woo; Kim, Hyung Kook; Hong, Suck Won; Hwang, Yoon-Hwae

    2016-01-01

    Well-aligned ZnO nanostructures have been intensively studied over the last decade for remarkable physical properties and enormous applications. Here, we describe a one-step fabrication technique to synthesis freestanding ZnO nanorod/graphene/ZnO nanorod double heterostructure. The preparation of the double heterostructure is performed by using thermal chemical vapor deposition (CVD) and preheating hydrothermal technique. In addition, the morphological properties were characterized by using the scanning electron microscopy (SEM). The utility of freestanding double heterostructure is demonstrated by fabricating the piezoelectric nanogenerator. The electrical output is improved up to 200% compared to that of a single heterostructure owing to the coupling effect of the piezoelectricity between the arrays of ZnO nanorods on the top and bottom of graphene. This unique double heterostructure have a tremendous potential for applications of electrical and optoelectrical devices where the high number density and specific surface area of nanorod are needed, such as pressure sensor, immuno-biosensor and dye-sensitized solar cells. PMID:26863044

  8. Highly efficient yttrium-doped ZnO nanorods for quantum dot-sensitized solar cells

    NASA Astrophysics Data System (ADS)

    Kim, Soo-Kyoung; Gopi, Chandu V. V. M.; Srinivasa Rao, S.; Punnoose, Dinah; Kim, Hee-Je

    2016-03-01

    Yttrium-doped ZnO nanorod arrays were applied to photoanodes of quantum dot-sensitized solar cells (QDSCs). The introduction of yttrium to ZnO nanostructures facilitates the growth of ZnO nanorods and increases the amount of QD deposition with a large surface area. Furthermore, lower electrical resistance and longer electron lifetime were achieved with yttrium-doping owing to fewer defects and trap sites on the surface of yttrium-doped ZnO nanorods. As a result, the conversion efficiency of 3.3% was achieved with the optimized concentration of yttrium.

  9. Optimization of processing parameters on the controlled growth of ZnO nanorod arrays for the performance improvement of solid-state dye-sensitized solar cells

    SciTech Connect

    Lee, Yi-Mu; Yang, Hsi-Wen

    2011-03-15

    High-transparency and high quality ZnO nanorod arrays were grown on the ITO substrates by a two-step chemical bath deposition (CBD) method. The effects of processing parameters including reaction temperature (25-95 {sup o}C) and solution concentration (0.01-0.1 M) on the crystal growth, alignment, optical and electrical properties were systematically investigated. It has been found that these process parameters are critical for the growth, orientation and aspect ratio of the nanorod arrays, showing different structural and optical properties. Experimental results reveal that the hexagonal ZnO nanorod arrays prepared under reaction temperature of 95 {sup o}C and solution concentration of 0.03 M possess highest aspect ratio of {approx}21, and show the well-aligned orientation and optimum optical properties. Moreover the ZnO nanorod arrays based heterojunction electrodes and the solid-state dye-sensitized solar cells (SS-DSSCs) were fabricated with an improved optoelectrical performance. -- Graphical abstract: The ZnO nanorod arrays demonstrate well-alignment, high aspect ratio (L/D{approx}21) and excellent optical transmittance by low-temperature chemical bath deposition (CBD). Display Omitted Research highlights: > Investigate the processing parameters of CBD on the growth of ZnO nanorod arrays. > Optimization of CBD process parameters: 0.03 M solution concentration and reaction temperature of 95 {sup o}C. > The prepared ZnO samples possess well-alignment and high aspect ratio (L/D{approx}21). > An n-ZnO/p-NiO heterojunction: great rectifying behavior and low leakage current. > SS-DSSC has J{sub SC} of 0.31 mA/cm{sup 2} and V{sub OC} of 590 mV, and an improved {eta} of 0.059%.

  10. Single ZnO nanocactus gas sensor formed by etching of ZnO nanorod

    NASA Astrophysics Data System (ADS)

    Ryong Ryu, Sung; Ram, S. D. Gopal; Cho, Hak-Dong; Lee, Dong Jin; Won Kang, Tae; Woo, Yongdeuk

    2015-06-01

    Etching of materials on the nanoscale is a challenging but necessary process in nanomaterials science. Gas sensing using a single ZnO nanocactus (NC), which was prepared by facile isotropic nanoetching of zinc oxide nanorods (NR) grown by chemical vapor deposition (CVD) using an organic photoresist (PR) by a thermochemical reaction, is reported in this work. PR consists of carboxylic acid groups (COOH) and cyclopentanone (C5H8O), which can react with zinc and oxygen atoms, respectively, on the surface of a ZnO NR. The thermochemical reaction is controllable by varying the concentration of PR and reaction time. A gas sensor was fabricated using a single NC. Gas sensing was tested using different gases such as CH4, NH3 and carbon monoxide (CO). It was estimated that the surface area of a ZnO NC in the case of 50% PR was found to increase four-fold. When compared with a single ZnO NR gas sensor, the sensitivity of a ZnO NC was found to increase four-fold. This increase in sensitivity is attributed to the increase in surface area of the ZnO NC. The formed single ZnO NC gas sensor has good stability, response and recovery time.Etching of materials on the nanoscale is a challenging but necessary process in nanomaterials science. Gas sensing using a single ZnO nanocactus (NC), which was prepared by facile isotropic nanoetching of zinc oxide nanorods (NR) grown by chemical vapor deposition (CVD) using an organic photoresist (PR) by a thermochemical reaction, is reported in this work. PR consists of carboxylic acid groups (COOH) and cyclopentanone (C5H8O), which can react with zinc and oxygen atoms, respectively, on the surface of a ZnO NR. The thermochemical reaction is controllable by varying the concentration of PR and reaction time. A gas sensor was fabricated using a single NC. Gas sensing was tested using different gases such as CH4, NH3 and carbon monoxide (CO). It was estimated that the surface area of a ZnO NC in the case of 50% PR was found to increase four

  11. Electronic structure of Co-doped ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Neffati, Ahmed; Souissi, Hajer; Kammoun, Souha

    2012-10-01

    The optical transmission spectra, the photoluminescence (PL), and the photoluminescence excitation (PLE) spectra of the cobalt doped zinc oxide nanorods Zn1-xCoxO (x = 0.01, 0.10) were measured by Loan et al. [J. Phys. D: Appl. Phys. 42, 065412 (2009)] in the region 1.5-4 eV. These spectra exhibit a group of ultraviolet narrow lines in the region of 3.0-3.4 eV related to the near-band-edge emission of the host ZnO materials and a group of emission lines in the red region of 1.8-1.9 eV assigned to the radiative transitions within the tetrahedral Co2+ ions in the ZnO host crystal. The group of lines in the visible region provides important information about the electronic structure of the cobalt doped zinc oxide nanorods. This work investigates a theoretical crystal-field analysis of the visible lines associated to the Co2+ ion transition occupying a Td site symmetry in ZnO host crystal. A satisfactory correlations were obtained between experimental and calculated energy levels. The electronic structure was compared with the reported for cobalt transition ion doped in ZnO nanoparticles and bulk crystals [Volbers et al., Appl. Phys. A 88, 153 (2007) and H. J. Schulz and M. Thiede, Phys. Rev. B 35, 18 (1987)]. In order to explain the existence of excitation peaks observed near the band edge of the ZnO host, an energy transfer mechanism is proposed.

  12. [The study on the growth process of ZnO nanorods].

    PubMed

    Qi, Xiu-qin; Tao, Dong-liang; Huang, Yi; Ling, Chen; Xu, Yi-zhuang; Wei, Fei; Wu, Jin-guang; Xu, Duan-fu

    2005-03-01

    Albstract The authors synthesized ZnO nanorods by calcining the precursor composed of PVP and Zn(CH3COO)2.2H2O at 300 degrees C. In order to investigate the growth process of ZnO nanorods, the precursor was calcined for different time (0.5, 3, 12, 24 h) and the corresponding products were measured by TEM, HR-TEM (high-resolution transmission electron microscopic), SAED (selected-area electron diffraction pattern) and XRD. The result showed that there were ZnO crystallites in the precursor of PVP and Zn(CH3COO)2.2H2O, which was dried at 110 degrees C. When the precursor was calcined at 300 degrees C for 0.5 h, ZnO nanorods could be observed with diameter of 50 nm and the nanorods consisted of two parts. One was compact nanorod with diameter of about 30 nm and the other part was ZnO crystallites attaching around the nanorod. This phenomenon indicated that there might be a transverse growth direction of ZnO nanorods at early time of crystal growth. When the precursor was calcined for 3 h, the products were direct and smooth single crystal ZnO nanorods. Further increasing the calcining time at 300 degrees C could improve the length of the ZnO nanorods in a certain extent while the diameter changed a little. The HR-TEM results showed that the growth direction of ZnO nanorods was along c axis. PMID:16013297

  13. Ferromagnetism in Sm doped ZnO nanorods by a hydrothermal method

    NASA Astrophysics Data System (ADS)

    Piao, Jingyuan; Tseng, Li-Ting; Yi, Jiabao

    2016-04-01

    Sm doped ZnO nanorods with various concentrations have been successfully synthesized using a hydrothermal method. XRD analysis indicates that there are no impurities or secondary phases in all the samples. The continuous expansion of d-spacing from XRD and TEM analysis suggests the effective corporation of Sm ions in ZnO. It is found that pure ZnO is paramagnetic. Both 1% and 5% Sm doped ZnO nanorods are ferromagnetic at room temperature. 5% Sm doped ZnO has a large paramagnetic signal at low temperature, suggesting the formation of the precipitation or clusters of samarium oxide.

  14. Electrosynthesis of ZnO nanorods and nanotowers: Morphology and X-ray Absorption Near Edge Spectroscopy studies

    NASA Astrophysics Data System (ADS)

    Sigircik, Gokmen; Erken, Ozge; Tuken, Tunc; Gumus, Cebrail; Ozkendir, Osman M.; Ufuktepe, Yuksel

    2015-06-01

    Deposition mechanism of nano-structured ZnO films has been investigated in the absence and presence of chloride ions from aqueous solution. The resulting opto-electronic properties were interpreted extensively, using X-ray diffraction (XRD), X-ray Absorption Near Edge Spectroscopy (XANES), field emission scanning electron microscopy (FE-SEM), UV-Visible spectroscopy and four probe techniques. The ZnO deposition is mass transport controlled process and the interaction of chloride ions with the surface has great influence on diffusion kinetics, considering the substantial species (Zn2+ and OH-) involved in the construction of ZnO film. This effect does not change major lattice parameters, as shown with detailed analysis of XRD data. However, the texture coefficient (Tc) (0 0 2) value is higher in presence of chloride ions containing synthesis solution which gave vertically aligned, well defined and uniformly dispersed nanorods structure. The calculated Eg values are in the range 3.28-3.41 eV and 3.22-3.31 eV for ZnO nanorods and nanotowers synthesized at different deposition periods, respectively. Furthermore, the charge mobility values regarding the deposition periods were measured to be in the ranges from 130.4 to 449.2 cm2 V-1 s-1 and 126.2 to 204.7 cm2 V-1 s-1 for nanorods and nanotowers, respectively. From XANES results, it was shown that the Zn K-edge spectrum is dominated by the transition of Zn 1s core electrons into the unoccupied Zn 4p states of the conduction band. Comparing the rod and tower nano-structured ZnO thin films, the excitation behavior of valence band electrons is different. Moreover, the density states of Zn 4p are higher for ZnO nanorods.

  15. Fabrication and resistive switching characteristics of high compact Ga-doped ZnO nanorod thin film devices

    NASA Astrophysics Data System (ADS)

    Yao, I.-Chuan; Lee, Dai-Ying; Tseng, Tseung-Yuen; Lin, Pang

    2012-04-01

    This study investigates the resistive switching behavior of Ga-doped ZnO (GZO) nanorod thin films with various Ga/Zn molar ratios. Vertically well-aligned and uniform GZO nanorod thin films were successfully grown on Au/Ti/SiO2/p-Si substrates using an aqueous solution method. X-ray diffraction (XRD) results indicate that GZO nanorods have [0001] highly preferred orientation. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations show the formation of highly ordered and dense nanorod thin films. These compact GZO nanorod thin films can be used to make resistive switching memory devices. Such memory devices can be reversibly switched between ON and OFF states, with a stable resistance ratio of ten times, narrow dispersion of ON and OFF voltages, and good endurance performance of over 100 cycles. The resistive switching mechanism in these devices is related to the formation and rupture of conducting filaments consisting of oxygen vacancies, occurring at interfaces between GZO nanorods (grain boundaries). Results show that the resulting compact GZO nanorod thin films have a high potential for resistive memory applications.

  16. Photoelectrochemical and photosensing behaviors of hydrothermally grown ZnO nanorods

    SciTech Connect

    Majumder, T.; Hmar, J. J. L.; Roy, J. N.; Mondal, S. P. E-mail: suvra.phy@nita.ac.in; Debnath, K.; Gogurla, N.; Ray, S. K.

    2014-07-21

    ZnO nanorods have been grown on indium-tin-oxide coated glass substrates by a low cost chemical process. Current-voltage characteristics have been studied using ZnO nanorods as photoanode in an electrochemical cell. The flat band voltage shift and depletion width of ZnO nanorods/electrolyte interface have been estimated from Mott-Schottky (MS) characteristics. The electrochemical impedance measurements have been carried out to study the charge transport mechanism at the semiconductor-electrolyte interface under dark and white light (100 mW/cm{sup 2}) illumination. The doping concentration of nanorods has been extracted from MS plot. Photoresponse behavior of ZnO nanorods is found to be enhanced than seed layers with the incident of white light. Spectral dependent photovoltage of ZnO nanorods has been carried out using monochromatic light of wavelength 250–600 nm. The photopotential recovery time has been estimated for nanorods and seed layers. The stability of ZnO nanorods as a photoanode has been investigated.

  17. Photoluminescence and field emission of 1D ZnO nanorods fabricated by thermal evaporation

    NASA Astrophysics Data System (ADS)

    Wang, B.; Jin, X.; Ouyang, Z. B.; Xu, P.

    2012-07-01

    Four kinds of new one-dimensional nanostructures, celery-shaped nanorods, needle-shaped nanorods, twist fold-shaped nanorods, and awl-shaped nanorods of ZnO, have been grown on single silicon substrates by an Au catalyst assisted thermal evaporation of ZnO and active carbon powders. The morphology and structure of the prepared nanorods are determined on the basis of field-emission scanning electron microscopy (FESEM) and x-ray diffraction (XRD). The photoluminescence spectra (PL) analysis noted that UV emission band is the band-to-band emission peak and the emission bands in the visible range are attributed to the oxygen vacancies, Zn interstitials, or impurities. The field-emission properties of four kinds of ZnO nanorods have been invested and the awl-shaped nanorods of ZnO have preferable characteristics due to the smallest emitter radius on the nanoscale in the tip in comparison with other nanorods. The growth mechanism of the ZnO nanorods can be explained on the basis of the vapor-liquid-solid (VLS) processes.

  18. Observation of polarized gain from aligned colloidal nanorods

    NASA Astrophysics Data System (ADS)

    Gao, Yuan; Ta, Van Duong; Zhao, Xin; Wang, Yue; Chen, Rui; Mutlugun, Evren; Fong, Kah Ee; Tan, Swee Tiam; Dang, Cuong; Sun, Xiao Wei; Sun, Handong; Demir, Hilmi Volkan

    2015-04-01

    In recent years, colloidal semiconductor nanorods have attracted great interest for polarized spontaneous emission. However, their polarized gain has not been possible to achieve so far. In this work we show the highly polarized stimulated emission from the densely packed ensembles of core-seeded nanorods in a cylindrical cavity. Here CdSe/CdS dot-in-rods were coated and aligned on the inner wall of a capillary tube, providing optical feedback for the nanorod gain medium. Results show that the polarized gain originates intrinsically from the aligned nanorods and not from the cavity and that the optical anisotropy of the nanorod ensemble was amplified with the capillary tube, resulting in highly polarized whispering gallery mode lasing. The highly polarized emission and lasing, together with easy fabrication and flexible incorporation, make this microlaser a promising candidate for important color conversion and enrichment applications including liquid crystal display backlighting and laser lighting.In recent years, colloidal semiconductor nanorods have attracted great interest for polarized spontaneous emission. However, their polarized gain has not been possible to achieve so far. In this work we show the highly polarized stimulated emission from the densely packed ensembles of core-seeded nanorods in a cylindrical cavity. Here CdSe/CdS dot-in-rods were coated and aligned on the inner wall of a capillary tube, providing optical feedback for the nanorod gain medium. Results show that the polarized gain originates intrinsically from the aligned nanorods and not from the cavity and that the optical anisotropy of the nanorod ensemble was amplified with the capillary tube, resulting in highly polarized whispering gallery mode lasing. The highly polarized emission and lasing, together with easy fabrication and flexible incorporation, make this microlaser a promising candidate for important color conversion and enrichment applications including liquid crystal display

  19. Shape-induced separation of nanospheres and aligned nanorods.

    PubMed

    Ahmad, I; Zandvliet, H J W; Kooij, E S

    2014-07-15

    We studied the phase separation and spatial arrangement of gold nanorods and nanospheres after evaporative self-assembly from aqueous suspension. Depending on the position relative to the contact line of the drying droplet, spheres and rods separate into various liquid-crystalline phases. Nanorods exhibit a strong preference for side-by-side alignment, giving rise to smectic phases; spheres in solution are forced out of these regions and form close-packed arrays. We discuss this self-separation into nanorod- and sphere-rich phases in terms of various interactions, including electrostatic, van der Waals, and deplection interactions forces. The experimental results are compared to quantitative calculations of the colloidal interaction energies. We also describe and discuss the role of the surfactant on the different crystal facets of the nanorods on the assembly process. PMID:24959664

  20. Au sensitized ZnO nanorods for enhanced liquefied petroleum gas sensing properties

    NASA Astrophysics Data System (ADS)

    Nakate, U. T.; Bulakhe, R. N.; Lokhande, C. D.; Kale, S. N.

    2016-05-01

    The zinc oxide (ZnO) nanorods have grown on glass substrate by spray pyrolysis deposition (SPD) method using zinc acetate solution. The phase formation, surface morphology and elemental composition of ZnO films have been investigated using X-ray diffraction, field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM) and energy dispersive X-ray (EDX) techniques. The liquefied petroleum gas (LPG) sensing response was remarkably improved by sensitization of gold (Au) surface noble metal on ZnO nanorods film. Maximum LPG response of 21% was observed for 1040 ppm of LPG, for pure ZnO nanorods sample. After Au sensitization on ZnO nanorods film sample, the LPG response greatly improved up to 48% at operating temperature 623 K. The improved LPG response is attributed Au sensitization with spill-over mechanism. Proposed model for LPG sensing mechanism discussed.

  1. Thermo-electrochemical selective growth of ZnO nanorods on any noble metal electrodes

    NASA Astrophysics Data System (ADS)

    You, Xueqiu; Park, Jungil; Choi, Jae-hoon; Pak, James Jungho

    2010-10-01

    Selective growth of ZnO nanorods has been successfully performed on the patterned Au/Ti metal electrode regions on a glass substrate by using a seeded thermo-electrochemical method in an acidic growth solution. The selective growth mechanism of the thermo-electrochemical method was proposed by using a series of chemical reactions for the first time. The thermo-electrochemical selective ZnO growth was performed on the cathode electrode at a temperature below 90 °C. A ZnO seed layer was precoated and selectively etched away from the non-metal regions in order to create the patterned selective nucleation sites on which the precursors are transferred and crystallized into ZnO nanorods. Both the dimensions and the placements of the ZnO nanorods have been simultaneously controlled. Energy dispersive X-ray spectrometry showed that the selectively grown ZnO nanorods consist of only Zn and O, indicating that the selectively grown ZnO nanorods are pure and contamination free. XRD and electron diffraction patterns revealed that the obtained ZnO nanorods have a wurtzite single-crystal structure.

  2. a High-Performance Glucose Biosensor Based on Zno Nanorod Arrays Modified with AU Nanoparticles

    NASA Astrophysics Data System (ADS)

    Zhang, Gong; Lei, Yang; Yan, Xiaoqin

    2012-08-01

    An amperometric glucose biosensor based on vertically aligned ZnO nanorod (NR) arrays modified with Au nanoparticles (NPs) was constructed in a channel-limited way. Au NPs with diameters in the range of 8-10 nm have been successfully synthesized by photoreduction method and were uniformly loaded onto the surface of ZnO NRs that was hydrothermally deposited on the Fluorine doped SnO2 conductive glass (FTO) via electrostatic self-assembly technique. The morphology and structure of Au/ZnO NR arrays were characterized by field-emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectrum analyzer (XPS). The electrocatalytic properties of glucose oxidase (GOD)- immobilized Au/ZnO NR arrays were evaluated by amperometry. Compared with the biosensor based on ZnO NR arrays, the resulting Au/ZnO NR arrays modified biosensor exhibited an expanded linear range from 3 μM to 3 mM with the detection limit of 30 nM and a smaller Michaelis-Menten constant of 0.7836 mM. All these results suggest that the Au NPs can greatly improve the biosensing properties of ZnO NR arrays and therefore Au/ZnO NR arrays provide a promising material for the biosensor designs and other biological applications.

  3. Growth of hybrid carbon nanostructures on iron-decorated ZnO nanorods.

    PubMed

    Mbuyisa, Puleng N; Rigoni, Federica; Sangaletti, Luigi; Ponzoni, Stefano; Pagliara, Stefania; Goldoni, Andrea; Ndwandwe, Muzi; Cepek, Cinzia

    2016-04-01

    A novel carbon-based nanostructured material, which includes carbon nanotubes (CNTs), porous carbon, nanostructured ZnO and Fe nanoparticles, has been synthetized using catalytic chemical vapour deposition (CVD) of acetylene on vertically aligned ZnO nanorods (NRs). The deposition of Fe before the CVD process induces the presence of dense CNTs in addition to the variety of nanostructures already observed on the process done on the bare NRs, which range from amorphous graphitic carbon up to nanostructured dendritic carbon films, where the NRs are partially or completely etched. The combination of scanning electron microscopy and in situ photoemission spectroscopy indicate that Fe enhances the ZnO etching, and that the CNT synthesis is favoured by the reduced Fe mobility due to the strong interaction between Fe and the NRs, and to the presence of many defects, formed during the CVD process. Our results demonstrate that the resulting new hybrid shows a higher sensitivity to ammonia gas at ambient conditions (∼60 ppb) than the carbon nanostructures obtained without the aid of Fe, the bare ZnO NRs, or other one-dimensional carbon nanostructures, making this system of potential interest for environmental ammonia monitoring. Finally, in view of the possible application in nanoscale optoelectronics, the photoexcited carrier behaviour in these hybrid systems has been characterized by time-resolved reflectivity measurements. PMID:26916977

  4. In situ reduced graphene oxide interlayer for improving electrode performance in ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Venkatesan, A.; Ramesha, C. K.; Kannan, E. S.

    2016-06-01

    The effect of reduced graphene oxide (RGO) thin film on the transport characteristics of vertically aligned zinc oxide nanorods (ZnO NRs) grown on ITO substrate was studied. GO was uniformly drop casted on ZnO NRs as a passivation layer and then converted into RGO by heating it at 60 °C prior to metal electrode deposition. This low temperature reduction is facilitated by the thermally excited electrons from ZnI interstitial sites (~30 meV). Successful reduction of GO was ascertained from the increased disorder band (D) intensity in the Raman spectra. Temperature (298 K–10 K) dependent transport measurements of RGO–ZnO NRs indicate that the RGO layer not only acts as a short circuiting inhibitor but also reduces the height of the potential barrier for electron tunneling. This is confirmed from the temperature dependent electrical characteristics which revealed a transition of carrier transport from thermionic emission at high temperature (T  >  100 K) to tunneling at low temperature (T  <  100 K) across the interface. Our technique is the most promising approach for making reliable electrical contacts on vertically aligned ZnO NRs and improving the reproducibility of device characteristics.

  5. Electronic nose based on multipatterns of ZnO nanorods on a quartz resonator with remote electrodes.

    PubMed

    Ko, Wooree; Jung, Namchul; Lee, Moonchan; Yun, Minhyuk; Jeon, Sangmin

    2013-08-27

    An electrodeless monolithic multichannel quartz crystal microbalance (MQCM) sensor was developed via the direct growth of ZnO nanorod patterns of various sizes onto an electrodeless quartz crystal plate. The patterned ZnO nanorods acted as independent resonators with different frequencies upon exposure to an electric field. The added mass of ZnO nanostructures was found to significantly enhance the quality factor (QF) of the resonator in electrodeless QCM configuration. The QF increased with the length of the ZnO nanorods; ZnO nanorods 5 μm in length yielded a 7-fold higher QF compared to the QF of a quartz plate without ZnO nanorods. In addition, the ZnO nanorods offered enhanced sensitivity due to the enlarged sensing area. The developed sensor was used as an electronic nose for detection of vapor mixtures with impurities. PMID:23883314

  6. The effects of addition of citric acid on the morphologies of ZnO nanorods

    SciTech Connect

    Yang Zao . E-mail: yangzao888@tom.com; Liu Quanhui; Yang Lei

    2007-02-15

    ZnO nanorods of 25-100 nm in diameter and 0.2-1 {mu}m in length were fabricated through citric acid assisted annealing process. The microstructure of ZnO nanorods was characterized by X-ray diffraction, transmission electron microscopy, high-resolution transmission electron microscopy and field-emission scanning electron microscopy, respectively. As a result, it was found that ZnO nanorods were single crystalline and pure. The effects of the growth conditions such as addition of citric acid, annealing temperature on the morphologies of ZnO nanostructures have also been investigated. At the given temperature the length decreased but the diameter increased with addition of the mass of citric acid. With the rising of the calcining heat, the shape of ZnO changed from rod to granule for a given amount of citric acid. Finally, the mechanism for citric acid assisted annealing synthesis of the ZnO nanostructure is discussed.

  7. "Secondary Growth" in Hydrothermal Synthesis of Aligned ZnO Nanostructures and Its Application in Dye-Sensitized Solar Cells.

    PubMed

    Liu, Wenjun; Huang, Qiaoling; Huang, Tengji; Cao, Peijiang; Han, Shun; Jia, Fang; Zhu, Deliang; Ma, Xiaocui; Lul, Youming

    2016-04-01

    One-dimensional (1D) aligned ZnO nanostructures were prepared on ZnO film seeded substrates using a low-temperature hydrothermal method, and zinc nitrate and hexamethylenetetramine (HMT) precursors. It was observed that increasing the concentration ratio of Zn2+/HMT from 1 to 100 led to a "secondary growth," and a change in the morphologies of the ZnO nanostructures from arrays of thick nanorods to arrays of thin nanorod-step-thick nanorods. The morphological evolution of ZnO nanostructures with increased growth time at high Zn2+/HMT concentration ratios showed the same transformation. Dye-sensitized solar cells (DSSCs) were fabricated using ZnO nanostructures as the photoanodes, and the electron transport properties were determined by electrochemical impedance spectroscopy (EIS). Although the DSSCs showed low power conversion efficiencies due to the short lengths, the arrays of the thin nanorods demonstrated excellent electron transport with an electron diffusion coefficient (Dn) of 1.57 x 10(-3) cm2/s, and an effective diffusion length (L) of 140 µm. PMID:27451759

  8. Novel Biomimatic Synthesis of ZnO Nanorods Using Egg White (Albumen) and Their Antibacterial Studies.

    PubMed

    Ahmed, Faheem; Arshi, Nishat; Jeong, Yeong Seung; Anwar, M S; Dwivedi, Saurabh; Alsharaeh, Edreese; Koo, B H

    2016-06-01

    Zinc oxide (ZnO) is well-recognized as a biocompatible multifunctional material with outstanding properties as well as low toxicity and biodegradability. In this work, a simple and versatile technique was developed to prepare highly crystalline ZnO nanorods by introducing egg white to a bio-inspired approach. X-ray diffraction (XRD) and selected area electron diffraction (SAED) pattern results indicated that the ZnO nanorods have single phase nature with the wurtzite structure. Field emission scanning electron microscopy (FESEM) and Transmission electron microscopy (TEM) results showed the nanometer dimension of the nanorods. Raman, FTIR, and TGA/DTA analyses revealed the formation of wurtzite ZnO. The antibacterial properties of ZnO nanorods were investigated using both Gram-positive and Gram-negative microorganisms. These studies demonstrate that ZnO nanorods have a wide range of antibacterial activities toward various microorganisms that are commonly found in environmental settings. Survival ratio of bacteria decreased with increasing powder concentration, i.e., increase in antibacterial activity. The antibacterial activity of the ZnO nanorods toward Pseudomonas aeruginosa was stronger than that of Escherichia coli and Staphylococcus aureus. Surprisingly, the antibacterial activity did not require specific UV activation using artificial lamps, rather activation was achieved under ambient lighting conditions. Overall, the experimental results suggest that ZnO nanorods could be developed as antibacterial agents against a wide range of microorganisms to control and prevent the spreading and persistence of bacterial infections. This research introduces a new concept to synthesize ZnO nanorods by using egg white as a biological template for various applications including food science, animal science, biochemistry, microbiology and medicine. PMID:27427657

  9. Electronic structure of ZnO nanorods studied by angle-dependent x-ray absorption spectroscopy and scanning photoelectron microscopy

    NASA Astrophysics Data System (ADS)

    Chiou, J. W.; Jan, J. C.; Tsai, H. M.; Bao, C. W.; Pong, W. F.; Tsai, M.-H.; Hong, I.-H.; Klauser, R.; Lee, J. F.; Wu, J. J.; Liu, S. C.

    2004-05-01

    Angle-dependent x-ray absorption near-edge structure (XANES) and scanning photoelectron microscopy measurements were performed to differentiate local electronic structures at the tips and sidewalls of highly aligned ZnO nanorods. The overall intensity of the O K-edge XANES spectra is greatly enhanced for small photon incident angles. In contrast, the overall intensity of the Zn K-edge XANES is much less sensitive to the photon incident angle. Both valence-band photoemission and O K-edge XANES spectra show substantial enhancement of O 2p derived states near the valence band maximum and conduction band minimum, respectively. The spatially resolved Zn 3d core level spectra from tip and sidewall regions show the lack of chemical shift. All the results consistently suggest that the tip surfaces of the highly aligned ZnO nanorods are terminated by O ions and the nanorods are oriented in the [0001¯] direction.

  10. ZnO Nanorods Based Enzymatic Biosensor for Selective Determination of Penicillin

    PubMed Central

    Ibupoto, Zafar Hussain; Ali, Syed Muhammad Usman; Khun, Kimleang; Chey, Chan Oeurn; Nur, Omer; Willander, Magnus

    2011-01-01

    In this study, we have successfully demonstrated the fabrication of a biosensor based on well aligned single-crystal zinc oxide (ZnO) nanorods which were grown on gold coated glass substrate using a low temperature aqueous chemical growth (ACG) method. The ZnO nanorods were immobilized with penicillinase enzyme using the physical adsorption approach in combination with N-5-azido-2-nitrobenzoyloxysuccinimide (ANB-NOS) as cross linking molecules. The potentiometric response of the sensor configuration revealed good linearity over a large logarithmic concentration range from 100 µM to 100 mM. During the investigations, the proposed sensor showed a good stability with high sensitivity of ~121 mV/decade for sensing of penicillin. A quick electrochemical response of less than 5 s with a good selectivity, repeatability, reproducibility and a negligible response to common interferents such as Na1+, K1+, d-glucose, l-glucose, ascorbic acid, uric acid, urea, sucrose, lactose, glycine, penicilloic acid and cephalosporins, was observed. PMID:25585565

  11. Hexagonal ZnO nanorods assembled flowers for photocatalytic dye degradation: Growth, structural and optical properties

    NASA Astrophysics Data System (ADS)

    Rahman, Qazi Inamur; Ahmad, Musheer; Misra, Sunil Kumar; Lohani, Minaxi B.

    2013-12-01

    A facile hydrothermal method was used to synthesize highly crystalline hexagonal ZnO nanorods assembled flowers by the reaction of zinc acetate and hexamethylenetetraamine (HMTA) at 105 °C. The morphological characterizations revealed that well defined ZnO nanorods were assembled into flowers morphology. X-rays diffraction patterns showed the highly crystalline nature of ZnO with hexagonal wurtzite structure. The structural and optical properties of hexagonal ZnO nanorods assembled flowers were measured by Fourier transform infra-red (FT-IR) and ultraviolet-visible (UV-Vis) measurements. The as-synthesized hexagonal ZnO nanorods assembled flowers were applied as an efficient photocatalyst for the photodegradation of organic dyes under UV-light irradiation. The methylene blue (MB) and rhodamine B (RhB) over the surface of hexagonal ZnO nanorods assembled flowers considerably degraded by ∼91% and ∼80% within 140 min respectively. The degradation rate constants were found to be kapp (0.01313 mint-1) and kapp(0.0104 mint-1) for MB and RhB dye respectively. The enhanced dye degradation might be attributed to the efficient charge separation and the large number of oxyradicals generation on the surface of the hexagonal ZnO nanorods assembled flowers.

  12. Solvothermal synthesis of nanorods of ZnO, N-doped ZnO and CdO

    SciTech Connect

    Varghese, Neenu; Panchakarla, L.S.; Hanapi, M.; Govindaraj, A.; Rao, C.N.R.

    2007-12-04

    ZnO nanorods with diameters in the 80-800 nm range are readily synthesized by the reaction of zinc acetate, ethanol and ethylenediamine under solvothermal conditions. The best products are obtained at 330 deg. C with a slow heating rate. Addition of the surfactant Triton -X 100 gave nanorods of uniform (300 nm) diameter. By adding a small amount of liquid NH{sub 3} to the reaction mixture, N-doped ZnO nanorods, with distinct spectroscopic features are obtained. CdO nanorods of 80 nm diameter have been prepared under solvothermal conditions using a mixture of cadmium cupferronate, ethylenediamine and ethanol at 330 deg. C. Similarly, Zn{sub 1-x}Cd{sub x}O nanorods of a 70 nm diameter are obtained under solvothermal conditions starting with a mixture of zinc acetate, cadmium cupferronate, ethanol and ethylenediamine.

  13. Room temperature ferromagnetism in undoped and Fe doped ZnO nanorods: Microwave-assisted synthesis

    SciTech Connect

    Limaye, Mukta V.; Singh, Shashi B.; Das, Raja; Poddar, Pankaj; Kulkarni, Sulabha K.

    2011-02-15

    One-dimensional (1D) undoped and Fe doped ZnO nanorods of average length {approx}1 {mu}m and diameter {approx}50 nm have been obtained using a microwave-assisted synthesis. The magnetization (M) and coercivity (H{sub c}) value obtained for undoped ZnO nanorods at room temperature is {approx}5x10{sup -3} emu/g and {approx}150 Oe, respectively. The Fe doped ZnO samples show significant changes in M -H loop with increasing doping concentration. Both undoped and Fe doped ZnO nanorods exhibit a Curie transition temperature (T{sub c}) above 390 K. Electron spin resonance and Moessbauer spectra indicate the presence of ferric ions. The origin of ferromagnetism in undoped ZnO nanorods is attributed to localized electron spin moments resulting from surface defects/vacancies, where as in Fe doped samples is explained by F center exchange mechanism. -- Graphical abstract: Room temperature ferromagnetism has been reported in undoped and Fe doped ZnO nanorods of average length {approx}1 {mu}m and diameter {approx}50 nm. Display Omitted Research Highlights: {yields} Microwave-assisted synthesis of undoped and Fe doped ZnO nanorods. {yields} Observation of room temperature ferromagnetism in undoped and Fe doped ZnO nanorods. {yields} Transition temperature (T{sub c}) obtained in undoped and doped samples is above 390 K. {yields} In undoped ZnO origin of ferromagnetism is explained in terms of defects/vacancies. {yields} Ferromagnetism in Fe doped ZnO is explained by F-center exchange mechanism.

  14. Effect of thicknesses of copper catalyst and oxide sublayer on morphology of ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Lyanguzov, N. V.; Kaydashev, V. E.; Kaidashev, E. M.; Abdulvakhidov, K. G.

    2011-03-01

    The influence of thicknesses of a ZnO sublayer and a copper catalyst film on the morphology of ZnO nanorods grown by carbothermal synthesis on α-Al2O3(11-20) substrates has been studied. An increase in the Cu catalyst film thickness leads to a growth in the diameters, heights, and surface density of nanorods. As the ZnO sublayer thickness is increased, the average diameter of nanorods also increases, while their lengths and surface density decrease. The effect of elevated temperatures on the thermal decomposition of ultrathin Cu films deposited on α-Al2O3 substrates has been studied. The photoluminescence characteristics of nanorod arrays have been measured at high levels of optical pumping. An increase in the pumping level to 250-280 kW/cm2 leads to superluminescence of the nanorods.

  15. Selective growth of ZnO nanorods on hydrophobic Si nanorod arrays

    NASA Astrophysics Data System (ADS)

    Lu, Ming-Yen; Wang, Ying-Jhe; Hong, Meng-Hsiang; Chiu, Cheng-Yao; You, Shuen-Jium; Lu, Ming-Pei

    2015-02-01

    In this paper we describe the selective growth of ZnO nanorods (NRs) on top of hydrophobic Si NR arrays. The periodic Si NR arrays, prepared through electroless chemical etching and HF treatment, functioned as hydrophobic substrates. Droplets containing ZnO seeds could be positioned on the Si NR arrays, causing the ZnO seeds to deposit selectively upon them, with n-ZnO NR/p-Si NR array heterojunctions ultimately forming after hydrothermal growth of ZnO NRs. Because of compensation for the difference in refractive index between air and the Si substrate, the n-ZnO NR/p-Si NR arrays exhibited excellent absorption ability in the visible range. Devices based on these n-ZnO NR/p-Si NR array heterojunctions displayed not only rectifying behavior but also photovoltaic effects when illuminated with UV light. The low temperature and low cost of this fabrication process suggest that the selective growth of n-ZnO NRs on p-Si NR arrays might allow such structures to have diverse applications in optoelectronics.

  16. Selective growth of ZnO nanorods on hydrophobic Si nanorod arrays.

    PubMed

    Lu, Ming-Yen; Wang, Ying-Jhe; Hong, Meng-Hsiang; Chiu, Cheng-Yao; You, Shuen-Jium; Lu, Ming-Pei

    2015-02-01

    In this paper we describe the selective growth of ZnO nanorods (NRs) on top of hydrophobic Si NR arrays. The periodic Si NR arrays, prepared through electroless chemical etching and HF treatment, functioned as hydrophobic substrates. Droplets containing ZnO seeds could be positioned on the Si NR arrays, causing the ZnO seeds to deposit selectively upon them, with n-ZnO NR/p-Si NR array heterojunctions ultimately forming after hydrothermal growth of ZnO NRs. Because of compensation for the difference in refractive index between air and the Si substrate, the n-ZnO NR/p-Si NR arrays exhibited excellent absorption ability in the visible range. Devices based on these n-ZnO NR/p-Si NR array heterojunctions displayed not only rectifying behavior but also photovoltaic effects when illuminated with UV light. The low temperature and low cost of this fabrication process suggest that the selective growth of n-ZnO NRs on p-Si NR arrays might allow such structures to have diverse applications in optoelectronics. PMID:25590263

  17. Arrays of nanorods composed of ZnO nanodots exhibiting enhanced UV emission and stability

    NASA Astrophysics Data System (ADS)

    Yin, Y.; Sun, Y.; Yu, M.; Liu, X.; Yang, B.; Liu, D.; Liu, S.; Cao, W.; Ashfold, Michael N. R.

    2014-08-01

    A novel one-step coating and assembly approach for fabricating well-defined ZnO nanodot/SiO2 nanorod arrays by hydrolysis-recrystallization growth from 1-D ZnO nanorods is described. The resultant composite nanorod arrays exhibit much enhanced UV emission efficiencies and excellent stability, and thus offer particular promise for application in UV emission devices operating in harsh environments.A novel one-step coating and assembly approach for fabricating well-defined ZnO nanodot/SiO2 nanorod arrays by hydrolysis-recrystallization growth from 1-D ZnO nanorods is described. The resultant composite nanorod arrays exhibit much enhanced UV emission efficiencies and excellent stability, and thus offer particular promise for application in UV emission devices operating in harsh environments. Electronic supplementary information (ESI) available: Suggested reaction scheme for the chemical processes occurring in this work; TEM images of ZnO NRs treated with 50 μL of TEOS; the diameter distribution of the ZnO NDs inside the ZnO/SiO2 NRs; PL spectra of as-grown ZnO NRs and of NRs after O2 and Ar plasma treatment; PL spectra of as-grown ZnO NRs and of NRs after annealing in O2 and in Ar; plot showing the time dependence of the relative UV emission intensity of the as-grown ZnO NRs and the TEOS-treated ZnO NRs immersed in an aqueous buffer solution at pH = 9.18; PL spectra of as-grown ZnO NRs and of the silica powders formed by hydrolysis and condensation reactions of TEOS; PL spectra of SiO2 powder after annealing in O2 at 300, 600 and 900 °C. See DOI: 10.1039/c4nr01558d

  18. Effect of phosphorus incorporation on morphology and optical properties of ZnO nanorods

    SciTech Connect

    Fan, Donghua; Zhang, Rong; Wang, Xianghu

    2011-04-15

    Graphical abstract: XPS spectra of the P-doped ZnO nanorods: (a) Zn 2p, (b) O 1s, and (c) P 2p spectra. The red curve in c is the Gauss-fitting curve. (d) Raman spectra of P-doped (curve 1) and pure (curve 2) ZnO nanorods. Research highlights: {yields} P-doped ZnO nanorods have been prepared on Si substrates without any catalyst. {yields} The introduction of phosphorus leads to the growth of tapered tip in the nanorods. {yields} The formation of tapered tip is attributed to the relaxation of the lattice strain along the radial direction. {yields} The strong ultraviolet peak is connected with the phosphorus acceptor-related emissions. -- Abstract: Phosphorus-doped ZnO nanorods have been prepared on Si substrates by thermal evaporation process without any catalyst. X-ray photoelectron spectroscopy and Raman spectra indicate that phosphorus entering into ZnO nanorods mainly occupies Zn site rather than O one. The introduction of phosphorus leads to the morphological changes of nanorods from hexagonal tip to tapered one, which should be attributed to the relaxation of the lattice strain caused by phosphorus occupying Zn site along the radial direction. Transmission electron microscopy shows that phosphorus-doped ZnO nanorods still are single crystal and grow along [0 0 0 1] direction. The effect of phosphorous dopant on optical properties of ZnO nanorods also is studied by the temperature-dependent photoluminescence spectra, which indicates that the strong ultraviolet emission is connected with the phosphorus acceptor-related emissions.

  19. Constructing MnO2/single crystalline ZnO nanorod hybrids with enhanced photocatalytic and antibacterial activity

    NASA Astrophysics Data System (ADS)

    Yu, Weiwei; Liu, Tiangui; Cao, Shiyi; Wang, Chen; Chen, Chuansheng

    2016-07-01

    In order to improve the photocatalytic and antibacterial activity of ZnO nanorods, ZnO nanorods decorated with MnO2 nanoparticles (MnO2/ZnO nanorod hybrids) were prepared by using microwave assisted coprecipitation method under the influence of hydrogen peroxide, and the structure, photocatalytic activity and antibacterial property of the products were studied. Experimental results indicated that MnO2 nanoparticles are decorated on the surface of single crystalline ZnO nanorods. Moreover, the resultant MnO2/ZnO nanorod hybrids have been proven to possess good photocatalytic and antibacterial activity, which their degradated efficiency for Rhodamin B (RhB) is twice as the pure ZnO nanorods. Enhancement for photocatalytic and antibacterial activity is mainly attributed to the low band gap energy and excellent electrochemical properties of MnO2 nanoparticles.

  20. The role of seeding in the morphology and wettability of ZnO nanorods films on different substrates

    NASA Astrophysics Data System (ADS)

    Rodríguez, Juan; Onna, Diego; Sánchez, Luis; Marchi, M. Claudia; Candal, Roberto; Ponce, Silvia; Bilmes, Sara A.

    2013-08-01

    Spray pyrolysis (SP) and spray-gel (SG) techniques were used to deposit ZnO seeds on Fluor doped tin oxide glasses (FTO), heated at 350 °C or 130 °C, and PET heated at 90 °C. The effect of seeding on the morphology and wettability of ZnO nanorods (NRs) films grown by wet chemical methods was analyzed. The morphology and wettability of ZnO NRs films depend on the seeding process. SP seeds formed from zinc acetate dissolved in water ethanol mixtures yield vertically aligned ZnO NRs, whose diameters and dispersion size are determined by the ethanol/water ratio in the precursor solution. SG seeds formed from a methanol ZnO sol produce a ring patterned distribution on the FTO substrate. The drying of ZnO sol drops impinging on the substrate produces high density of seeds along a ring yielding textured films with NRs vertically oriented on the rings and multi-oriented outside them. This effect was not observed when ZnO NRs grown onto the ZnO/PET substrate, however rod diameter is related with the density of seeds. This way to control the density and diameter of NRs deposited onto a substrate modify the wettability and opens new possibilities for the design of tailored nanomaterials for photochemical applications. Both type of NRs films showed a strong luminescence emission in the UV and in the blue, associated with surface and intrinsic defects.

  1. Selective growth of ZnO nanorods on microgap electrodes and their applications in UV sensors

    PubMed Central

    2014-01-01

    Selective area growth of ZnO nanorods is accomplished on microgap electrodes (spacing of 6 μm) by using a facile wet chemical etching process. The growth of ZnO nanorods on a selected area of microgap electrode is carried out by hydrothermal synthesis forming nanorod bridge between two electrodes. This is an attractive, genuine, direct, and highly reproducible technique to grow nanowire/nanorod onto the electrodes on selected area. The ZnO nanorods were grown at 90°C on the pre-patterned electrode system without destroying the electrode surface structure interface and geometry. The ZnO nanorods were tested for their application in ultraviolet (UV) sensors. The photocurrent-to-dark (Iph/Id) ratio was 3.11. At an applied voltage of 5 V, the response and recovery time was 72 and 110 s, respectively, and the response reached 2 A/W. The deposited ZnO nanorods exhibited a UV photoresponse that is promising for future cost-effective and low-power electronic UV-sensing applications. PMID:24423232

  2. Fabrication of tunable hydrophobic surface of ZnO nanorods with Cu doping

    SciTech Connect

    Chakraborty, Mohua; Thangavel, R.

    2015-08-28

    In this work, tunable wettability of the Zinc Oxide (ZnO) nanorod surface with Cu doping prepared by a hydrothermal method. These grown samples were characterized by XRD, FESEM, AFM and water contact angle measurements. The wettability of the ZnO nanorods surface area was controlled and tuned by different concentration of copper doping. It was found that the hydrophobic surface of doped ZnO Nanorods shows a maximum and minimum contact angle of about 156.60° and 136.36° was achieved with doping concentration of 10 and 20 M % respectively. Further, the surface properties such as surface energy and work of adhesion were calculated for undoped and Cu doped ZnO nanostructure surfaces. These nanosructures can be potentially applicable to enlarge time honoured application of ZnO based electronic devices.

  3. Paper modified with ZnO nanorods – antimicrobial studies

    PubMed Central

    Jaisai, Mayuree

    2012-01-01

    Summary Paper with antimicrobial properties was developed through in situ growth of ZnO nanorods. The targeted application for this type of paper is in health centers as wallpaper, writing paper, facemasks, tissue paper, etc. The paper was tested on three model microbes, Gram-positive bacteria Staphylococcus aureus, Gram-negative bacteria Escherichia coli and common airborne fungus Aspergillus niger. No viable bacterial colonies or fungal spores could be detected in the areas surrounding test samples of the antimicrobial paper. Gram-negative bacteria Escherichia coli were found to be inhibited in an area that is 239% and 163% the area of the paper sample under different room lighting conditions, i.e., halogen and fluorescent lamp illumination, respectively. For Gram-positive bacteria Staphylococcus aureus the zones of inhibition surrounding the paper samples are 102% and 70%, and for Aspergillus niger, 224% and 183% of the sample area, under similar lighting conditions. PMID:23213632

  4. ZnO nanorods decorated with ZnS nanoparticles

    SciTech Connect

    Joicy, S.; Sivakumar, P.; Thangadurai, P.; Ponpandian, N.

    2015-06-24

    In this study, ZnO nanorods (NRs) and ZnS nanoparticles decorated ZnO-NRs were prepared by a combination of hydrothermal and hydrolysis method. Structural and optical properties of the samples were studied by XRD, FE-SEM, UV-Vis DRS and photoluminescence spectroscopy. Microscopy analysis revealed that the diameter of ZnO-NRs was ∼500 nm and the length was ranging from a few hundred nm to several micrometers and their surface was decorated with ZnS nanoparticles. UV-Vis DRS showed the absorption of ZnS decorated ZnO-NRs was blue shifted with respect to pure ZnO-NRs which enhanced the separation of electron-hole pairs. PL spectrum of ZnS decorated ZnO-NRs showed a decrease in intensity of UV and green emissions with the appearance of blue emission at 436 nm.

  5. Surface modification of ZnO nanorods with Hamilton receptors.

    PubMed

    Zeininger, Lukas; Klaumünzer, Martin; Peukert, Wolfgang; Hirsch, Andreas

    2015-01-01

    A new prototype of a Hamilton receptor suitable for the functionalization of inorganic nanoparticles was synthesized and characterized. The hydrogen bonding receptor was coupled to a catechol moiety, which served as anchor group for the functionalization of metal oxides, in particular zinc oxide. Synthesized zinc oxide nanorods [ZnO] were used for surface functionalization. The wet-chemical functionalization procedure towards monolayer-grafted particles [ZnO-HR] is described and a detailed characterization study is presented. In addition, the detection of specific cyanurate molecules is demonstrated. The hybrid structures [ZnO-HR-CA] were stable towards agglomeration and exhibited enhanced dispersability in apolar solvents. This observation, in combination with several spectroscopic experiments gave evidence of the highly directional supramolecular recognition at the surface of nanoparticles. PMID:25872141

  6. Surface Modification of ZnO Nanorods with Hamilton Receptors

    PubMed Central

    Zeininger, Lukas; Klaumünzer, Martin; Peukert, Wolfgang; Hirsch, Andreas

    2015-01-01

    A new prototype of a Hamilton receptor suitable for the functionalization of inorganic nanoparticles was synthesized and characterized. The hydrogen bonding receptor was coupled to a catechol moiety, which served as anchor group for the functionalization of metal oxides, in particular zinc oxide. Synthesized zinc oxide nanorods [ZnO] were used for surface functionalization. The wet-chemical functionalization procedure towards monolayer-grafted particles [ZnO-HR] is described and a detailed characterization study is presented. In addition, the detection of specific cyanurate molecules is demonstrated. The hybrid structures [ZnO-HR-CA] were stable towards agglomeration and exhibited enhanced dispersability in apolar solvents. This observation, in combination with several spectroscopic experiments gave evidence of the highly directional supramolecular recognition at the surface of nanoparticles. PMID:25872141

  7. Low-temperature growth and characterization of single crystalline ZnO nanorod arrays using a catalyst-free inductively coupled plasma-metal organic chemical vapor deposition.

    PubMed

    Jeong, Sang-Hun; Lee, Chang-Bae; Moon, Won-Jin; Song, Ho-Jun

    2008-10-01

    Vertically aligned ZnO nanorod arrays have been synthesized on c-plane sapphires at a low temperature of 400 degrees C using catalyst-free inductively coupled plasma (ICP) metal organic chemical vapor deposition (MOCVD) technique by varying the ICP powers. Diameters of the ZnO nanorods changed from 200 nm to 400 nm as the ICP power increased from 200 to 400 Watt. TEM and XRD investigations indicated that the ZnO nanorod arrays grown at ICP powers above 200 Watt had a homogeneous in-plane alignment and single crystalline nature. PL study at room temperature (RT) and 6 K confirmed that the ZnO nanorod arrays in the present study are of high optical quality as well as good crystalline quality, showing only exciton-related emission peaks without any trace of defect-related deep level emissions in visible range. The blueshift of exciton emission peak in RTPL spectra was also found as rod diameter decreased and it is deduced that this shift in emission energy may be due to the surface resonance effect resulted from the increased surface-to-volume ratio, based on the observation and behavior of the surface exciton (SX) emission in the high-resolution 6 K PL spectra. PMID:19198399

  8. Type-II ZnO nanorod-SnO2 nanoparticle heterostructures: characterization of structural, optical and photocatalytic properties.

    PubMed

    Huang, Xing; Shang, Lu; Chen, Shu; Xia, Jing; Qi, Xiaopeng; Wang, Xuecong; Zhang, Tierui; Meng, Xiang-Min

    2013-05-01

    In this work we report, for the first time, on the preparation of ZnO nanorod-SnO2 nanoparticle (ZnO NR-SnO2 NP) heterostructures by a simple two-step thermal evaporation approach. Systematical characterization of the product reveals that the rutile SnO2 NPs, with a diameter of about 20 nm, are uniformly and tightly decorated on the entire ZnO NRs. Photoluminescence (PL) investigation on the ZnO NR-SnO2 NP heterostructures shows that they exhibit a significantly decreased UV emission compared with the bare ZnO NRs, revealing an efficient charge separation arising from the type-II band alignment. Enlightened by this merit, photocatalytic behavior of the synthesized heterostructures is studied, which shows a remarkably enhanced photodegradation performance of rhodamine B (RhB) in contrast to the pure ZnO NRs. We also carry out the stability test of the ZnO NR-SnO2 NP heterostructures and the result indicates an extremely high adhesion nature between the ZnO NR and the coated SnO2 NPs. This advantage endowed with the thermal evaporation approach can lead to an efficient spatial charge separation between the ZnO NR and the SnO2 NPs and thus effectively minimize the charge recombination along three-dimensional heterointerfaces, which makes such ZnO NR-SnO2 NP architectures highly promising for a wide range of photovoltaic and photocatalytic applications. PMID:23519460

  9. The Experiment and Simulation Method to Calibrate the Shear Modulus of Individual ZnO Nanorod.

    PubMed

    Yu, Guangbin; Jiang, Chengming; Dai, Bing; Song, Jinhui

    2016-04-01

    A general method is presented to directly measure the shear modulus of an individual nanorod using atomic force microscope (AFM). To obtain shear modulus with less experiment error, finite element simulation is employed to simulate the twisting process of a ZnO nanorod. Based on the experimental measurements, the shear modulus of ZnO nanorod with 4 µm in length and 166 nm in radius is characterized to be 9.1 ± 0.2 GPa, which is obviously more accurate than the simple averaged experimental result. PMID:27451763

  10. The dependence of the lasing threshold in ZnO nanorods on their length

    SciTech Connect

    Gruzintsev, A. N.; Emelchenko, G. A.; Red'kin, A. N.; Volkov, W. T.; Yakimov, E. E.; Visimberga, G.

    2010-09-15

    The effect of the length of ZnO nanorods on the mode structure and thresholds of stimulated and laser luminescence in the ultraviolet spectral region is studied. It is shown that nanorods with a metal mirror at the end face exhibit the minimum optical excitation power threshold in the case of long nanoresonators. Single-mode lasing is observed in short ZnO nanorods. Variations in the lasing thresholds are attributed to differences in the length of the amplifying medium and in the local densities of photon states in regularly shaped nanocrystals.

  11. Structural and optical properties of ZnO nanorods synthesized via template free approach

    NASA Astrophysics Data System (ADS)

    Kajal, Priyanka; D, Pooja; Jaggi, Neena

    2016-06-01

    In this paper, we report a novel method for synthesis of semiconducting ZnO nanorods using Zinc acetate dehydrate precursor in a methanol—de-ionized (1:5) mixture via template free approach. Scanning electron microscope (SEM) and transmission electron microscope (TEM) images of as synthesized nanorods revealed hexagonal symmetry of rods, whereas x-ray diffraction (XRD) analysis for structure and phase has shown high crystallinity with wurtzite crystal structure. The structural characterization by FT-IR analysis revealed presence of various groups on as synthesized ZnO nanorods, whereas the UV–Vis analysis has shown a blue shift in the absorption spectra as compared to bulk ZnO due to quantum confinement of charge carriers. Photoluminescence (PL) spectroscopy study has also been performed revealing a good degree of phosphorescence in the ZnO nanorods. Further, thermo gravimetric analysis (TGA) revealed that as synthesized nanorods by present method are highly stable at high temperature (1000 °C). This study provides an alternative, less expensive and a very simple method for the fabrication of ZnO nanorods in abundance, which can be further used for various sensing applications, in particular, gas sensing.

  12. ZnO Nanorod-Based Non-Enzymatic Optical Glucose Biosensor.

    PubMed

    Sarangi, Sachindra Nath; Nozaki, Shinji; Sahu, Surendra Nath

    2015-06-01

    The highly sensitive, interference-free and non-enzymatic optical sensing of glucose has been made possible for the first time using the hydrothermally synthesized ZnO nanorods. The UV irradiation of glucose-treated ZnO nanorods decomposes glucose into hydrogen peroxide (H2O2) and gluconic acid by UV oxidation. The ZnO nanorods play the role of a catalyst similar to the oxidase used in the enzymatic glucose sensors. The photoluminescence (PL) intensity of the near-band edge emission of the ZnO nanorods linearly decreased with the increased concentration of H2O2. Therefore, the glucose concentration is monitored over the wide range of 0.5-30 mM, corresponding to 9-540 mg/dL. The concentration range of the linear region in the calibration curve is suitable for its clinical use as a glucose sensor, because the glucose concentration of human serum is typically in the range of 80-120 mg/dL. In addition, the optical glucose sensor made of the ZnO nanorods is free from interference by bovin serum albumin, ascorbic acid or uric acid, which are also present in human blood. The non-enzymatic ZnO-nanorod sensor has been demonstrated with human serum samples from both normal persons and diabetic patients. There is a good agreement between the glucose concentrations measured by the PL quenching and standard clinical methods. PMID:26353588

  13. Growth-induced Stacking Faults of ZnO Nanorods Probed by Spatial Resolved Cathodoluminescence

    NASA Astrophysics Data System (ADS)

    Xie, Yong; Jie, Wan-Qi; Wang, Tao; Wiedenmann, Michael; Neuschl, Benjamin; Madel, Manfred; Wang, Ya-Bin; Feneberg, Martin; Thonke, Klaus

    2012-07-01

    Low density ZnO nanorods are grown by modified chemical vapor deposition on silicon substrates using gold as a catalyst. We use high resolution photoluminescence spectroscopy to gain the optical properties of these nanorods in large scale. The as-grown samples show sharp near-band-gap luminescence with a full width at half maximum of bound exciton peaks at about 300 μeV, and the ratio of ultraviolet/yellow luminescence larger than 100. Highly spatial and spectral resolved scanning electron microscope-cathodoluminescence is performed to excite the ZnO nanorods in single rods or different positions of single rods with the vapour-solid growth mechanism. The bottom of the nanorod has a 3.31-eV luminescence, which indicates that basal plane stacking faults are related to the defects that are created at the first stage of growth due to the misfit between ZnO and Si.

  14. Effect of aspect ratio and surface defects on the photocatalytic activity of ZnO nanorods

    PubMed Central

    Zhang, Xinyu; Qin, Jiaqian; Xue, Yanan; Yu, Pengfei; Zhang, Bing; Wang, Limin; Liu, Riping

    2014-01-01

    ZnO, aside from TiO2, has been considered as a promising material for purification and disinfection of water and air, and remediation of hazardous waste, owing to its high activity, environment-friendly feature and lower cost. However, their poor visible light utilization greatly limited their practical applications. Herein, we demonstrate the fabrication of different aspect ratios of the ZnO nanorods with surface defects by mechanical-assisted thermal decomposition method. The experiments revealed that ZnO nanorods with higher aspect ratio and surface defects show significantly higher photocatalytic performances. PMID:24699790

  15. Effect of aspect ratio and surface defects on the photocatalytic activity of ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Zhang, Xinyu; Qin, Jiaqian; Xue, Yanan; Yu, Pengfei; Zhang, Bing; Wang, Limin; Liu, Riping

    2014-04-01

    ZnO, aside from TiO2, has been considered as a promising material for purification and disinfection of water and air, and remediation of hazardous waste, owing to its high activity, environment-friendly feature and lower cost. However, their poor visible light utilization greatly limited their practical applications. Herein, we demonstrate the fabrication of different aspect ratios of the ZnO nanorods with surface defects by mechanical-assisted thermal decomposition method. The experiments revealed that ZnO nanorods with higher aspect ratio and surface defects show significantly higher photocatalytic performances.

  16. Intracellular ZnO Nanorods Conjugated with Protoporphyrin for Local Mediated Photochemistry and Efficient Treatment of Single Cancer Cell

    NASA Astrophysics Data System (ADS)

    Kishwar, S.; Asif, M. H.; Nur, O.; Willander, M.; Larsson, Per-Olof

    2010-10-01

    ZnO nanorods (NRs) with high surface area to volume ratio and biocompatibility is used as an efficient photosensitizer carrier system and at the same time providing intrinsic white light needed to achieve cancer cell necrosis. In this letter, ZnO nanorods used for the treatment of breast cancer cell (T47D) are presented. To adjust the sample for intracellular experiments, we have grown the ZnO nanorods on the tip of borosilicate glass capillaries (0.5 μm diameter) by aqueous chemical growth technique. The grown ZnO nanorods were conjugated using protoporphyrin dimethyl ester (PPDME), which absorbs the light emitted by the ZnO nanorods. Mechanism of cytotoxicity appears to involve the generation of singlet oxygen inside the cell. The novel findings of cell-localized toxicity indicate a potential application of PPDME-conjugated ZnO NRs in the necrosis of breast cancer cell within few minutes.

  17. Surface functionalization and electronic interactions of ZnO nanorods with a porphyrin derivative.

    PubMed

    Klaumünzer, Martin; Kahnt, Axel; Burger, Alexandra; Mačković, Mirza; Münzel, Corinna; Srikantharajah, Rubitha; Spiecker, Erdmann; Hirsch, Andreas; Peukert, Wolfgang; Guldi, Dirk M

    2014-05-14

    To optimize electron transfer and optoelectronic properties in nanoparticulate thin films for electronics we show the surface functionalization of ZnO nanorods by means of replacing surface active 2-[2-(2-methoxyethoxy)ethoxy]acetic acid (TODA) by a redoxactive organic component, that is, 5,10,15,20-(phenoxyacetat)-porphyrin bearing four carboxylic acids as possible ZnO anchors. Microscopy-transmission electron microscopy-and spectroscopy-optical spectroscopy-verifies the successful and homogenous integration of the porphyrin onto the surface of ZnO nanorods, a process that is facilitated by the four anchoring groups. Photophysical investigations based on emission and absorption spectroscopy prompt to distinct electronic interactions between ZnO nanorods and the porphyrins. Consequently, we performed further photophysical studies flanked by pulse radiolysis assays to corroborate the nature of the electronic interactions. PMID:24665864

  18. Selective zinc ion detection by functionalised ZnO nanorods with ionophore

    NASA Astrophysics Data System (ADS)

    Ibupoto, Z. H.; Usman Ali, Syed M.; Chey, C. O.; Khun, K.; Nur, O.; Willander, Magnus

    2011-11-01

    In this paper, highly dense and well aligned single-crystal zinc oxide nanorods were grown along the c-axis on a gold coated glass substrate using a low temperature aqueous chemical growth approach. The prepared ZnO nanorods were functionalized with plastic membrane coatings containing specific ionophore (12-crown-4) which is highly selective to zinc ions (Zn+2). The electrochemical response of the sensor was found to be linear over a relatively wide logarithmic concentration range from 1 μM to 100 mM. The proposed sensor showed a good linearity with a high sensitivity of ˜35 mV/decade for sensing Zn+2 ions. A fast response time of less than 5 s with a good selectivity, repeatability, reproducibility, and negligible response to common interferents ions such as calcium (Ca2+), magnesium (Mg2+), or potassium (K+), and iron (Fe+3) and copper (Cu+2) was also demonstrated. Moreover, the proposed sensor showed good stoichiometric results for potentiometric titration.

  19. Synthesis of novel AuPd nanoparticles decorated one-dimensional ZnO nanorod arrays with enhanced photoelectrochemical water splitting activity.

    PubMed

    Lu, Yan; Zhang, Junlong; Ge, Lei; Han, Changcun; Qiu, Ping; Fang, Siman

    2016-12-01

    The vertically aligned one-dimensional (1D) ZnO nanorod arrays decorated with AuPd alloy nanoparticles have been synthesized with ZnO nanorod arrays as template via a mild hydrothermal method. In this work, the as-prepared AuPd/ZnO nanorod arrays demonstrated high light-harvesting efficiency. The microstructures, morphologies and chemical properties of the obtained AuPd/ZnO composite photocatalyst were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-vis diffuse reflectance spectra (DRS) and X-ray photoelectron spectroscopy (XPS). The photoelectrochemical (PEC) performances of as-obtained AuPd/ZnO nanorod arrays were examined, and the photocurrent density was up to 0.98mAcm(-2) at 0.787V versus Ag/AgCl, which was about 2.4 times higher than the pure ZnO sample. A possible photocatalytic mechanism of the AuPd/ZnO hybrid nanostructures under the simulated sunlight irradiation was proposed to guide further improvement of other desirable materials. According to the above experiment results, it can be clearly found that AuPd/ZnO composite nanorod arrays showed excellent PEC performance and had promising applications in the utilization of solar energy. PMID:27552423

  20. Aligned Silver Nanorod Array as SERS Substrates for Viral Sensing

    NASA Astrophysics Data System (ADS)

    Zhao, Yiping; Shanmukh, Saratchandra; Chaney, Stephen B.; Jones, Les; Dluhy, Richard A.; Tripp, Ralph A.

    2006-03-01

    The aligned silver nanorod array substrates prepared by the oblique angle deposition method are capable of providing extremely high enhancement factors (˜10^9) at near-infrared wavelengths (785 nm) for a standard reporter molecule 1,2 trans-(bis)pyridyl-ethene (BPE). The enhancement factor depends strongly on the length of the Ag nanorods, the substrate coating, as well as the polarization of the excitation laser beam. With the current optimum structure, we demonstrate that the detection limit for BPE can be lower than 0.1 fM. The applicability of this substrate to the detection of bioagents has been investigated by looking several viruses, such as Adenovirus, HIV, Rhinovirus and Respiratory Syncytial Virus (RSV), at low quantities (˜0.5uL). Different viruses have different fingerprint Raman spectrum. The detection of virus presented in infected cells has also been demonstrated.

  1. Preparation, characterization and electroluminescence studies of ZnO nanorods for optoelectronic device applications

    SciTech Connect

    Singh, Anju; Vishwakarma, H. L.

    2015-07-31

    In this work, ZnO nanorods were achieved by a simple chemical precipitation method in the presence of capping agent Poly Vinyl Pyrrolidone (PVP) at room temperature. X-Ray Diffraction (XRD) result indicates that the synthesized undoped ZnO nanorods have wurtzite hexagonal structure without any impurities. It has been seen that the growth orientation of the prepared ZnO nanorods were (101). XRD analysis revealed that the nanorods having the crystallite size 49 nm. The Scanning Electron Microscopy (SEM) image confirmed the size and shape of these nanorods. The diameter of nanorods has been found that 1.52 µm to 1.61 µm and the length of about 4.89 µm. It has also been found that at room temperature Ultra Violet Visible (UV-VIS) absorption band is around 355 nm (blue shifted as compared to bulk). Electroluminescence (EL) studies show that emission of light is possible at very small threshold voltage and increases rapidly with increasing applied voltage. It is seen that smaller ZnO nanoparticles give higher electroluminescence brightness starting at lower threshold voltage. The brightness is also affected by increasing the frequency of AC signal.

  2. Electrochemically grown ZnO nanorods for hybrid solar cell applications

    SciTech Connect

    Hames, Yakup; Alpaslan, Zuehal; Koesemen, Arif; San, Sait Eren; Yerli, Yusuf

    2010-03-15

    A hybrid solar cell is designed and proposed as a feasible and reasonable alternative, according to acquired efficiency with the employment of zinc oxide (ZnO) nanorods and ZnO thin films at the same time. Both of these ZnO structures were grown electrochemically and poly(3-hexylthiophene):phenyl-C61-butyric acid methyl ester; (P3HT:PCBM) was used as an active polymer blend, which was found to be compatible to prepared indium-tin-oxide (ITO) substrate base. This ITO base was introduced with mentioned ZnO structure in such a way that, the most efficient configuration was optimized to be ITO/ZnO film/ZnO nanorod/P3HT: PCBM/Ag. Efficiency of this optimized device is found to be 2.44%. All ZnO works were carried out electrochemically, that is indeed for the first time and at relatively lower temperatures. (author)

  3. Synthesis of highly efficient antibacterial agent Ag doped ZnO nanorods: Structural, Raman and optical properties

    SciTech Connect

    Jan, Tariq; Iqbal, Javed; Ismail, Muhammad; Mahmood, Arshad

    2014-04-21

    Here, synthesis, structural, morphological, Raman, optical properties and antibacterial activity of undoped and Ag doped ZnO nanorods by chemical co-precipitation technique have been reported. Structural analysis has revealed that Ag doping cannot deteriorate the structure of ZnO and wurtzite phase is maintained. Lattice constants are found to be decreased with the Ag doping. Fourier transform infrared and Raman spectroscopy also confirm the X-ray diffraction results. Scanning electron microscopy results have demonstrated the formation of ZnO nanorods with average diameter and length of 96 nm and 700 nm, respectively. Raman spectroscopy results suggest that the Ag doping enhances the number of defects in ZnO crystal. It has been found from optical study that Ag doping results in positional shift of band edge absorption peak. This is attributed to the successful incorporation of Ag dopant into ZnO host matrix. The antibacterial activity of prepared nanorods has been determined by two different methods and compared to that of undoped ZnO nanorods. Ag doped ZnO nanorods exhibit excellent antibacterial activity as compared to that of undoped ZnO nanorods. This excellent antibacterial activity may be attributed to the presence of oxygen vacancies and Zn{sup 2+} interstitial defects. Our preliminary findings suggest that Ag doped ZnO nanorods can be used externally to control the spreading of infections related with tested bacterial strains.

  4. Effect of growth time on ZnO nanorod arrays by a facile sonicated sol-gel immersion technique

    NASA Astrophysics Data System (ADS)

    Malek, M. F.; Mamat, M. H.; Musa, M. Z.; Ishak, A.; Saurdi, I.; Alrokayan, Salman A. H.; Khan, Haseeb A.; Rusop, M.

    2016-07-01

    A facile sonicated sol-gel immersion technique has been presented for synthesizing ZnO nanorod arrays with controllable diameter and lengths on glass substrates. A sol-gel dip-coating deposition was first used to grow a thin layer of ZAO nanocrystals on substrate serving as seeds for the subsequent growth of the nanorod arrays. The effect of growth time of the ZnO nanorod arrays on the ZAO seed layer were investigated. The optical transmission properties of the ZnO nanorods has been investigated. The thickness of the nanorods can be controlled by the growth time. These highly oriented ZnO nanorod arrays are potential for the creation of functional materials, such as the electrode of the solar cells, optoelectronic devices and etc.

  5. Controllable electrochemical synthesis of ZnO nanorod arrays on flexible ITO/PET substrate and their structural and optical properties

    NASA Astrophysics Data System (ADS)

    Ko, Yeong Hwan; Kim, Myung Sub; Yu, Jae Su

    2012-10-01

    The structural and optical properties of vertically aligned zinc oxide (ZnO) nanorod arrays (NRAs) which were grown on the flexible indium tin oxide (ITO) coated polyethylene terephthalate (PET) substrate (i.e., ITO/PET substrate) with a thin sputtered ZnO seed layer via the electrochemical deposition method were studied. By changing the applied voltage and zinc nitrate concentration, the height/width and density of ZnO NRAs were controlled, with investigation on their crystallinity and optical properties. To understand the effect of ZnO seed layer on the growth property of ZnO nanorods, they were also grown on ITO/PET without any seed layer. Under an applied cathodic voltage of -2 V and zinc nitrate concentration of 10 mM, the ZnO NRAs increased the total transmittance up to 88.7% in the visible wavelength region due to the antireflective property and their X-ray diffraction (0 0 2) peak intensity was largely enhanced. Additionally, the near band edge emission of ZnO was significantly enhanced in photoluminescence spectrum. The light scattering and surface wetting properties were also explored.

  6. Structural and Morphology of ZnO Nanorods Synthesized Using ZnO Seeded Growth Hydrothermal Method and Its Properties as UV Sensing

    PubMed Central

    Ridhuan, Nur Syafinaz; Abdul Razak, Khairunisak; Lockman, Zainovia; Abdul Aziz, Azlan

    2012-01-01

    In this study, zinc oxide (ZnO) nanorod arrays were synthesized using a simple hydrothermal reaction on ZnO seeds/n-silicon substrate. Several parameters were studied, including the heat-treatment temperature to produce ZnO seeds, zinc nitrate concentration, pH of hydrothermal reaction solution, and hydrothermal reaction time. The optimum heat-treatment temperature to produce uniform nanosized ZnO seeds was 400°C. The nanorod dimensions depended on the hydrothermal reaction parameters. The optimum hydrothermal reaction parameters to produce blunt tip-like nanorods (770 nm long and 80 nm in top diameter) were 0.1 M zinc nitrate, pH 7, and 4 h of growth duration. Phase analysis studies showed that all ZnO nanorods exhibited a strong (002) peak. Thus, the ZnO nanorods grew in a c-axis preferred orientation. A strong ultraviolet (UV) emission peak was observed for ZnO nanorods grown under optimized parameters with a low, deep-level emission peak, which indicated high optical property and crystallinity of the nanorods. The produced ZnO nanorods were also tested for their UV-sensing properties. All samples responded to UV light but with different sensing characteristics. Such different responses could be attributed to the high surface-to-volume ratio of the nanorods that correlated with the final ZnO nanorods morphology formed at different synthesis parameters. The sample grown using optimum synthesis parameters showed the highest responsivity of 0.024 A/W for UV light at 375 nm under a 3 V bias. PMID:23189199

  7. Carrier transport mechanisms of hybrid ZnO nanorod-polymer LEDs

    NASA Astrophysics Data System (ADS)

    Cho, Sungjae; Lee, Kyu Seung; Son, Dong Ick; Oh, Youngjei; Choi, Won Kook; Angadi, Basavaraj

    2014-07-01

    A hybrid polymer-nanorod (NR) light-emitting diode (LED), consisting of a hole-conducting polymer poly (9-vinyl carbazole) (PVK) and ZnO nanorod (NR) composite, with the device structure of glass/indium-tin-oxide (ITO)/PEDOT:PSS/(PVK + ZnO nanorods)/Al is fabricated through a simple spin coating technique. TEM images shows inhomogeneous deposition and the agglomeration of ZnO NRs, which is explained through their low probability of adsorption on PVK due to two-dimensional structural property. In the current-voltage characteristics, negative differential resistance (NDR) phenomenon is observed corresponding to device structure without ZnO NRs. The carrier transport behavior in the LED device is well described by both ohmic and space-chargelimited-current (SCLC) mechanisms. Broad blue electroluminescence (EL) consisting of two sub peaks, are centered at 441 nm and the other at 495 nm, is observed, which indicates that the ZnO nanorod play a role as a recombination center for excitons. The red shift in the position of the EL compared to that photoluminescence is well explained through band offsets at the heterojunction between the PVK and ZnO NRs.

  8. Enhanced photovoltaic performance of quantum dot-sensitized solar cell fabricated using Al-doped ZnO nanorod electrode

    NASA Astrophysics Data System (ADS)

    Raja, M.; Muthukumarasamy, N.; Velauthapillai, Dhayalan; Balasundrapraphu, R.; Senthil, T. S.; Agilan, S.

    2015-04-01

    ZnO and Al doped ZnO nanorods have been successfully synthesized on ITO substrate via solgel dip coating method without using any catalyst. The X-ray diffraction studies showed that the Al doped ZnO samples are of hexagonal wurtzite structure. The Al ions were successfully incorporated into the ZnO lattice. Scanning electron microscopy images reveal that the average diameter of ZnO nanorods and Al doped ZnO nanorods are ∼300 nm and ∼200 nm respectively. The energy dispersive X-ray (EDS) analysis confirmed the presence Al in the ZnO thin films. The CdS quantum dot sensitized Al doped ZnO solar cell exhibited a power conversion efficiency of 1.5%.

  9. Optical and ferromagnetic properties of Cr doped ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Lin, Bao-Zhu; Zhou, Lin; Yuldashev, Sh. U.; Fu, De-Jun; Kang, Tae-Won

    2014-10-01

    ZnO nanorods doped with 1-2 wt% Cr were grown on Si substrates by hydrothermal method. Scanning electron spectroscopy and X-ray diffraction show the hexagonal structure of the nanorods with ZnO oriented along (1 0 0), (0 0 2), (1 0 1) and (1 0 2) and CrO2 along (2 1 1). Ionized donor bound exciton, neutral donor bound exciton, free exciton, two-electron-satellite of hydrogen donor bound exciton, and donor acceptor pairs were observed in low temperature photoluminescence spectra. The photoluminescence spectra along with XPS results confirm that Zni was formed in the low temperature hydrothermal process. Superconducting quantum interference device measurement reveals that the Cr-doped ZnO nanorods are ferromagnetic with saturation magnetization of 2.421 × 10-3 emu/g. The room temperature ferromagnetic properties are explained by defect-mediated bound magnetic polarons based on Zni.

  10. Tuning of defects in ZnO nanorod arrays used in bulk heterojunction solar cells

    PubMed Central

    2012-01-01

    With particular focus on bulk heterojunction solar cells incorporating ZnO nanorods, we study how different annealing environments (air or Zn environment) and temperatures impact on the photoluminescence response. Our work gives new insight into the complex defect landscape in ZnO, and it also shows how the different defect types can be manipulated. We have determined the emission wavelengths for the two main defects which make up the visible band, the oxygen vacancy emission wavelength at approximately 530 nm and the zinc vacancy emission wavelength at approximately 630 nm. The precise nature of the defect landscape in the bulk of the nanorods is found to be unimportant to photovoltaic cell performance although the surface structure is more critical. Annealing of the nanorods is optimum at 300°C as this is a sufficiently high temperature to decompose Zn(OH)2 formed at the surface of the nanorods during electrodeposition and sufficiently low to prevent ITO degradation. PMID:23186280

  11. Process of in situ forming well-aligned zinc oxide nanorod arrays on wood substrate using a two-step bottom-up method.

    PubMed

    Liu, Yongzhuang; Fu, Yanchun; Yu, Haipeng; Liu, Yixing

    2013-10-01

    A good nanocrystal covering layer on wood can serve as a protective coating and present some new surface properties. In this study, well-aligned ZnO nanorods (NRs) arrays were successfully grown on wood surface through a two-step bottom-up growth process. The process involved pre-sow seeds and subsequently their growing into NRs under hydrothermal environment. The interface incorporation between wood and ZnO colloid particles in the precursor solution during the seeding process was analyzed and demonstrated through a schematic. The growth process of forming well-aligned ZnO NRs was analyzed by field-emission scanning electron microscopy and X-ray diffraction, which showed that the NRs elongated with increased reaction time. The effects of ZnO crystal form and capping agent on the growth process were studied through different viewpoints. PMID:23880522

  12. Synthesis of Sn-doped ZnO nanorods and their photocatalytic properties

    SciTech Connect

    Wu, Changle; Shen, Li; Yu, Huaguang; Huang, Qingli; Zhang, Yong Cai

    2011-07-15

    Graphical abstract: Sn-doped ZnO nanorods have been fabricated by a hydrothermal route. Photocatalytic activity of the Sn-doped ZnO samples increases gradually with an increase of the Sn content. Highlights: {yields} Sn-doped ZnO nanorods were fabricated by a hydrothermal route. {yields} Solid-state NMR result confirms Sn{sup 4+} was incorporated into the lattice of ZnO. {yields} The visible luminescence intensity increased with increase in Sn concentration. {yields} Photocatalytic activity of Sn-doped ZnO increases with increasing Sn content. -- Abstract: Sn-doped ZnO nanorods were fabricated by a hydrothermal route, and characterized by X-ray diffraction, field emission scanning electron microscope, UV-vis spectroscopy, Raman spectra, solid-state nuclear magnetic resonance (NMR) spectra, and room temperature photoluminescence spectroscopy. Solid-state NMR result confirms that Sn{sup 4+} was successfully incorporated into the crystal lattice of ZnO. Room temperature photoluminescence showed that all the as-synthesized products exhibited a weak UV emission (380 nm) and a strong visible emission (540 nm), but the intensities of the latter emission increased with increase in Sn concentration. The improvement of visible emission at 540 nm in the Sn-doped ZnO samples was suggested to be a result of the lattice defects increased by doping of Sn in zinc oxide. In addition, the photocatalytic studies indicated that Sn-doped ZnO nanorods are a kind of promising photocatalyst in remediation of water polluted by some chemically stable azo dyes.

  13. An electric-field assisted growth control methodology for integrating ZnO nanorods with microstructures.

    PubMed

    Zong, X; Zhu, R

    2014-11-01

    The growth control of ZnO nanorods bridging over two microelectrodes in a three-electrode structure (the top cathode and anode, and the bottom gate) was realized using a wet chemical method with the assistance of an electric field generated by applying AC sine wave power on the top electrodes and a DC voltage on the bottom gate. A numerical control model for controlling the growth position, direction and density of ZnO nanorods on the microstructure was established based on the simulation of the electric-field distribution around the microstructures. The three input parameters in the numerical control model were defined as the peak-to-peak voltage of the AC sine wave (x1), the frequency of the AC sine wave (x2) and gate voltage (x3). Moreover, five output parameters (y1, y2, y3, y4, y5) in the model were defined as the electric field intensities at specific points on the electrodes to characterize the growth rate, direction, position and morphology of the ZnO nanorods integrated with the microelectrodes. The relationship between the defined outputs and inputs were established using 3(rd) polynomial fitting, which served as the numerical control model for the prediction of nanorod growth. The experimental results validated that growth control methodology provides us with an effective approach to integrate ZnO nanorods into devices. PMID:25219487

  14. Electrical properties of an individual ZnO micro/nanorod

    NASA Astrophysics Data System (ADS)

    Santos-Putungan, A. B.; Bambao, L. M.; Sarmago, R. V.

    2015-06-01

    Free standing, highly crystalline ZnO micro/nanorods have been successfully fabricated using low temperature hydrothermal synthesis. Current-voltage characteristic curves show that ZnO micro/nanorods' resistances are proportional to their geometrical ratios, satisfying classical Ohm's law. Temperature-dependent resistance measurements reveal exponential decay of current with temperature, implying good semiconducting properties. Finally, three different thermally-activated impurity levels were identified from the measurements, and these are attributed to Zn interstitials in the bulk. The results are important in supplementing research on nanoelectronics and nanocircuitries.

  15. Structure and photocatalytic activity of Ni-doped ZnO nanorods

    SciTech Connect

    Zhao, Jing; Wang, Li; Yan, Xiaoqin; Yang, Ya; Lei, Yang; Zhou, Jing; Huang, Yunhua; Gu, Yousong; Zhang, Yue

    2011-08-15

    Graphical abstract: Degradation rates of rhodamine B by Zn{sub 1-x}Ni{sub x}O photocatalyst. Highlights: {yields} The Ni-doped ZnO nanorods show a new band at {approx}130 cm{sup -1} in Raman spectra at room temperature. We conclude this mode is caused by an ordered arrangement of Ni dopants in the ZnO lattice. {yields} When the Ni-doping concentration raises, the band gap first increases and then decreases. {yields} The ZnO nanorods with different Ni-doping concentraton all exhibited higher photocatalytic activity than un-doped ZnO. The order of photocatalytic activities is Zn{sub 0.95}Ni{sub 0.05}O > Zn{sub 0.9}Ni{sub 0.1}O > Zn{sub 0.98}Ni{sub 0.02}O > ZnO. -- Abstract: The one-dimensional (1D) Zn{sub 1-x}Ni{sub x}O (x = 0, 0.02, 0.05, 0.10) nanorods have been synthesized by a simple hydrothermal method. New bands show at {approx}130 cm{sup -1} in the Raman spectra of Ni-doped ZnO nanorods and their relative intensity depends on the doping concentration of nickel. The optical band gap of the ZnO nanorods have been tuned by Ni-doping, which is revealed by absorption spectra. The photocatalytic activity of Zn{sub 1-x}Ni{sub x}O was studied by comparing the degradation rate of rhodamine B (RB) under UV-light irradiation. It was found that Zn{sub 0.95}Ni{sub 0.05}O exhibited the highest photocatalytic degradation efficiency among the samples.

  16. Photovoltaic properties of ZnO nanorods/p-type Si heterojunction structures.

    PubMed

    Pietruszka, Rafal; Witkowski, Bartlomiej Slawomir; Luka, Grzegorz; Wachnicki, Lukasz; Gieraltowska, Sylwia; Kopalko, Krzysztof; Zielony, Eunika; Bieganski, Piotr; Placzek-Popko, Ewa; Godlewski, Marek

    2014-01-01

    Selected properties of photovoltaic (PV) structures based on n-type zinc oxide nanorods grown by a low temperature hydrothermal method on p-type silicon substrates (100) are investigated. PV structures were covered with thin films of Al doped ZnO grown by atomic layer deposition acting as transparent electrodes. The investigated PV structures differ in terms of the shapes and densities of their nanorods. The best response is observed for the structure containing closely-spaced nanorods, which show light conversion efficiency of 3.6%. PMID:24605282

  17. Crystallographic, luminescence and photoconductive characteristics of chemically tailored ZnO nanorods

    SciTech Connect

    Bayan, Sayan Chakraborty, Purushottam

    2014-04-24

    The optoelectronic properties of zinc oxide (ZnO) nanorods synthesized using two different chemical methods have been explored in the light of microstructural features. The presence/absence of band edge emission in the luminescence spectra of the nanorods is found to be governed by the crystallographic properties. Moreover, we observed a pronounced effect of variation in crystallite size on the UV photoconductivity of the nanorods. Understanding the influence of microstructural aspects on the optical and electronic properties of the nanostructures may help in the fabrication of prototype, miniaturized optoelectronic devices.

  18. Microwave assisted hydrothermal synthesize of ZnO nanorods and their characterization

    NASA Astrophysics Data System (ADS)

    Shojaee, Nadi; Ebadzadeh, Touradj; Aghaei, Alireza

    In present study ZnO nanorods were synthesized in an aqueous solution using a domestic microwave oven for irradiation. The nanorods have been grown on substrates immersed in an aqueous solution which contains zinc nitrate and hexamethylenetetramine as precursors. Eventually, effect of some parameters such as precursor's concentration and heating time on growth mechanism was characterized. The product phase was detected using X-ray diffraction (XRD). Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) exhibited the resultant structure is uniform and single crystalline. Finally Uv-Vis spectroscopy was used to measure the nanorod's band gap.

  19. Resistive switching characteristics of a compact ZnO nanorod array grown directly on an Al-doped ZnO substrate

    NASA Astrophysics Data System (ADS)

    Yoo, E. J.; Shin, J. Y.; Yoon, T. S.; Kang, C. J.; Choi, Y. J.

    2016-07-01

    ZnO’s resistive switching properties have drawn much attention because ZnO has a simple chemical composition and is easy to manipulate. The propulsion mechanism for resistive switching in ZnO is based on a conducting filament that consists of oxygen vacancies. In the case of film structure, the random formation of the conducting filaments occasionally leads to unstable switching characteristics. Limiting the direction in which the conducting filaments are formed is one way to solve this problem. In this study, we demonstrate reliable resistive switching behavior in a device with an Au/compact ZnO nanorod array/Al-doped ZnO structure with stable resistive switching over 105 cycles and a long retention time of 104 s by confining conducting filaments along the boundaries between ZnO nanorods. The restrictive formation of conducting filaments along the boundaries between ZnO nanorods is observed directly using conductive atomic force microscopy.

  20. Co-functionalized organic/inorganic hybrid ZnO nanorods as electron transporting layers for inverted organic solar cells.

    PubMed

    Ambade, Swapnil B; Ambade, Rohan B; Eom, Seung Hun; Baek, Myung-Jin; Bagde, Sushil S; Mane, Rajaram S; Lee, Soo-Hyoung

    2016-03-01

    In an unprecedented attempt, we present an interesting approach of coupling solution processed ZnO planar nanorods (NRs) by an organic small molecule (SM) with a strong electron withdrawing cyano moiety and the carboxylic group as binding sites by a facile co-functionalization approach. Direct functionalization by SMs (SM-ZnO NRs) leads to higher aggregation owing to the weaker solubility of SMs in solutions of ZnO NRs dispersed in chlorobenzene (CB). A prior addition of organic 2-(2-methoxyethoxy)acetic acid (MEA) over ZnO NRs not only inhibits aggregation of SMs over ZnO NRs, but also provides enough sites for the SM to strongly couple with the ZnO NRs to yield transparent SM-MEA-ZnO NRs hybrids that exhibited excellent capability as electron transporting layers (ETLs) in inverted organic solar cells (iOSCs) of P3HT:PC60BM bulk-heterojunction (BHJ) photoactive layers. A strongly coupled SM-MEA-ZnO NR hybrid reduces the series resistance by enhancing the interfacial area and tunes the energy level alignment at the interface between the (indium-doped tin oxide, ITO) cathode and BHJ photoactive layers. A significant enhancement in power conversion efficiency (PCE) was achieved for iOSCs comprising ETLs of SM-MEA-ZnO NRs (3.64%) advancing from 0.9% for pristine ZnO NRs, while the iOSCs of aggregated SM-ZnO NRs ETL exhibited a much lower PCE of 2.6%, thus demonstrating the potential of the co-functionalization approach. The superiority of the co-functionalized SM-MEA-ZnO NRs ETL is also evident from the highest PCE of 7.38% obtained for the iOSCs comprising BHJ of PTB7-Th:PC60BM compared with extremely poor 0.05% for non-functionalized ZnO NRs. PMID:26864170

  1. Studies on the structural and optical properties of zinc oxide nanobushes and Co-doped ZnO self-aggregated nanorods synthesized by simple thermal decomposition route

    SciTech Connect

    Freedsman, Joseph J.; Kennedy, L. John; Kumar, R. Thinesh; Sekaran, G.; Vijaya, J. Judith

    2010-10-15

    Pure and Co-doped zinc oxide nanomaterials were prepared by a simple low temperature synthesis and were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution-transmission electron microscopy (HR-TEM), diffused reflectance spectroscopy (DRS) and electron paramagnetic resonance (EPR) techniques. The results showed the formation of nanobushes that consists of several nanowires for pure ZnO and the nanorods formed by self-aggregation for Co-doped ZnO. The presence of Co{sup 2+} ions replacing some of the Zn{sup 2+} in the ZnO lattice was confirmed by EPR and DRS studies. The mechanism for the formation of self-aggregated and self-aligned ZnO rods after the incorporation of cobalt in the lattice by the building block units is discussed in this study. Morphological studies were carried out using SEM and HR-TEM, which supports the validity of the proposed mechanism for the formation of ZnO nanobushes and Co-doped ZnO nanorods. The synthesized nanomaterials were found to have good optoelectronic properties.

  2. Morphological and structural characterization of single-crystal ZnO nanorod arrays on flexible and non-flexible substrates

    PubMed Central

    Farhat, Omar F; Halim, Mohd M; Abdullah, Mat J; Ali, Mohammed K M

    2015-01-01

    Summary We report a facile synthesis of zinc oxide (ZnO) nanorod arrays using an optimized, chemical bath deposition method on glass, PET and Si substrates. The morphological and structural properties of the ZnO nanorod arrays were investigated using various techniques such as field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) measurements, which revealed the formation of dense ZnO nanorods with a single crystal, hexagonal wurtzite structure. The aspect ratio of the single-crystal ZnO nanorods and the growth rate along the (002) direction was found to be sensitive to the substrate type. The lattice constants and the crystallite size of the fabricated ZnO nanorods were calculated based on the XRD data. The obtained results revealed that the increase in the crystallite size is strongly associated with the growth conditions with a minor dependence on the type of substrate. The Raman spectroscopy measurements confirmed the existence of a compressive stress in the fabricated ZnO nanorods. The obtained results illustrated that the growth of high quality, single-crystal ZnO nanorods can be realized by adjusting the synthesis conditions. PMID:25821712

  3. Growth of ZnO Nanorods on Stainless Steel Wire Using Chemical Vapour Deposition and Their Photocatalytic Activity

    PubMed Central

    Abd Aziz, Siti Nor Qurratu Aini; Pung, Swee-Yong; Ramli, Nurul Najiah; Lockman, Zainovia

    2014-01-01

    The photodegradation efficiency of ZnO nanoparticles in removal of organic pollutants deteriorates over time as a high percentage of the nanoparticles can be drained away by water during the wastewater treatment. This problem can be solved by growing the ZnO nanorods on stainless steel wire. In this work, ZnO nanorods were successfully grown on stainless steel wire by chemical vapour deposition. The SAED analysis indicates that ZnO nanorod is a single crystal and is preferentially grown in [0001] direction. The deconvoluted O 1s peak at 531.5 eV in XPS analysis is associated with oxygen deficient, revealing that the ZnO nanorods contain many oxygen vacancies. This observation is further supported by the finding of the small Iuv/Ivis ratio, that is, ~1 in the photoluminescence analysis. The growth of ZnO nanorods on stainless steel wire was governed by vapour-solid mechanism as there were no Fe particles observed at the tips of the nanorods. The photodegradation of Rhodamine B solution by ZnO nanorods followed the first-order kinetics. PMID:24587716

  4. Growth of ZnO nanorods on stainless steel wire using chemical vapour deposition and their photocatalytic activity.

    PubMed

    Abd Aziz, Siti Nor Qurratu Aini; Pung, Swee-Yong; Ramli, Nurul Najiah; Lockman, Zainovia

    2014-01-01

    The photodegradation efficiency of ZnO nanoparticles in removal of organic pollutants deteriorates over time as a high percentage of the nanoparticles can be drained away by water during the wastewater treatment. This problem can be solved by growing the ZnO nanorods on stainless steel wire. In this work, ZnO nanorods were successfully grown on stainless steel wire by chemical vapour deposition. The SAED analysis indicates that ZnO nanorod is a single crystal and is preferentially grown in [0001] direction. The deconvoluted O 1s peak at 531.5 eV in XPS analysis is associated with oxygen deficient, revealing that the ZnO nanorods contain many oxygen vacancies. This observation is further supported by the finding of the small I(uv)/I(vis) ratio, that is, ~1 in the photoluminescence analysis. The growth of ZnO nanorods on stainless steel wire was governed by vapour-solid mechanism as there were no Fe particles observed at the tips of the nanorods. The photodegradation of Rhodamine B solution by ZnO nanorods followed the first-order kinetics. PMID:24587716

  5. Effect of Zinc Nitrate Concentration on the Optical and Morphological Properties of ZnO Nanorods for Photovoltaic Applications.

    PubMed

    Kim, Sung Jae; Anwar, M S; Heo, Si-Nae; Koo, Bon Heun

    2016-06-01

    We report the effect of zinc nitrate (ZN) concentration on the growth of zinc oxide (ZnO) nanorods and their optical and morphological properties. As prepared ZnO nanorods on glass substrate were characterized using field emission scanning electron microscopy (FE-SEM), ultra violet-visible (UV-Vis), Raman and Photo-luminescence (PL) spectroscopy. FE-SEM results show that the nanorods were obtained for the 0.033 and 0.053 M concentration of ZN. As the ZN concentration increased from 0.033 M to 0.053 M, the diameter of the nanorods was increased. It indicated that the diameter of the nanorods was affected by the ZN concentration. The Raman spectra of nanorods show only one peak at 438 cm(-1) corresponding to E2(high) high mode, which means that ZnO nanorods grown perpendicularly on the glass substrate, i.e., the ZnO nanorod arrays are highly c-axis oriented. Room-temperature PL spectrum of the as-grown ZnO nanorods reveals a near-band-edge (NBE) emission peak and defect induced green light emission. The green light emission band at -579 nm might be attributed to surface oxygen vacancies or defects. The UV-visible measurements reflect that the total transmittance for the as grown ZnO nanorods is over 80%. The simple technique presented in this study to grow ZnO nanorods on a glass substrate can be helpful for making the cost effective photovoltaic devices. PMID:27427680

  6. Influence of ZnO nanorod on the luminescent and electrical properties of fluorescent dye-doped polymer nanocomposite

    NASA Astrophysics Data System (ADS)

    Zhang, T.; Xu, Z.; Qian, L.; Tao, D. L.; Teng, F.; Xu, X. R.

    2006-11-01

    The luminescent properties of fluorescent dye-doped polymer dispersed with ZnO nanorods were investigated. Embedding ZnO nanorods in blend film results in a blue-shifted emission of fluorescent dye. It is accounted for in terms of the difference in permittivity between inorganic oxide nano-material and dye-doped polymer. Moreover, polymer light-emitting diodes with the addition of ZnO nanorods showed the lower threshold voltage and the higher charge current and electroluminescence efficiency.

  7. Time-dependent mechanical-electrical coupled behavior in single crystal ZnO nanorods

    PubMed Central

    Kim, Yong-Jae; Yun, Tae Gwang; Choi, In-Chul; Kim, Sungwoong; Park, Won Il; Han, Seung Min; Jang, Jae-il

    2015-01-01

    Nanoscale time-dependent mechanical-electrical coupled behavior of single crystal ZnO nanorods was systematically explored, which is essential for accessing the long-term reliability of the ZnO nanorod-based flexible devices. A series of compression creep tests combined with in-situ electrical measurement was performed on vertically-grown single crystal ZnO nanorods. Continuous measurement of the current (I)-voltage (V) curves before, during, after the creep tests revealed that I is non-negligibly increased as a result of the time-dependent deformation. Analysis of the I-V curves based on the thermionic emission-diffusion theory allowed extraction of nanorod resistance, which was shown to decrease as time-dependent deformation. Finally, based on the observations in this study, a simple analytical model for predicting the reduction in nanorod resistance as a function of creep strain that is induced from diffusional mechanisms is proposed, and this model was demonstrated to be in an excellent agreement with the experimental results. PMID:25982962

  8. Hydrothermally Processed Photosensitive Field-Effect Transistor Based on ZnO Nanorod Networks

    NASA Astrophysics Data System (ADS)

    Kumar, Ashish; Bhargava, Kshitij; Dixit, Tejendra; Palani, I. A.; Singh, Vipul

    2016-07-01

    Formation of a stable, reproducible zinc oxide (ZnO) nanorod-network-based photosensitive field-effect transistor using a hydrothermal process at low temperature has been demonstrated. K2Cr2O7 additive was used to improve adhesion and facilitate growth of the ZnO nanorod network over the SiO2/Si substrate. Transistor characteristics obtained in the dark resemble those of the n-channel-mode field-effect transistor (FET). The devices showed I on/I off ratio above 8 × 102 under dark condition, field-effect mobility of 4.49 cm2 V-1 s-1, and threshold voltage of -12 V. Further, under ultraviolet (UV) illumination, the FET exhibited sensitivity of 2.7 × 102 in off-state (-10 V) versus 1.4 in on-state (+9.7 V) of operation. FETs based on such nanorod networks showed good photoresponse, which is attributed to the large surface area of the nanorod network. The growth temperature for ZnO nanorod networks was kept at 110°C, enabling a low-temperature, cost-effective, simple approach for high-performance ZnO-based FETs for large-scale production. The role of network interfaces in the FET performance is also discussed.

  9. Synthesis and characterization of hydrothermally grown zinc oxide (ZnO) nanorods for optical waveguide application

    NASA Astrophysics Data System (ADS)

    Pandey, Chandan A.; Rahim, Rafis; Manjunath, S.; Hornyak, Gabor L.; Mohammed, Waleed S.

    2015-07-01

    We report a simple method to synthesize Zinc oxide nanorods, grown without using catalysis with less complicity. This was done by hydrothermal treatment of zinc nitrate and hexamine at 90°C and various times (5- 20h) and also we find that the nanorod size and shape depends on heating rate, temperature and heating time. ZnO nanorods have been investigated for their light guiding ability and their effective index of refraction for use in near air index optical systems by developing a ridge waveguide structure. ZnO nanorod waveguides (100 μm w x 2.5 μm h x 1mm l) were grown on a seeded glass substrate template using hydrothermal process at 90°C. Modification of the substrate surface in order to obtain dense perpendicularly-oriented ordered nanorods induced selective growth. These structures were characterized by SEM, EDX, and XRD. The guiding property, i.e. locally excited photoluminescence propagation along the length of the waveguide, was analyzed with imageprocessing program in MATLAB. Following application of a fiber optic white light source on the ZnO nanostructure, we found that light propagation occurred within the glass substrate. No such propagation occurred if light was applied on uncoated areas of the glass. Modeling of waveguide behavior to determine the number propagating modes was exercised using waveguide mode solver in COMSOL.

  10. Time-dependent mechanical-electrical coupled behavior in single crystal ZnO nanorods.

    PubMed

    Kim, Yong-Jae; Yun, Tae Gwang; Choi, In-Chul; Kim, Sungwoong; Park, Won Il; Han, Seung Min; Jang, Jae-il

    2015-01-01

    Nanoscale time-dependent mechanical-electrical coupled behavior of single crystal ZnO nanorods was systematically explored, which is essential for accessing the long-term reliability of the ZnO nanorod-based flexible devices. A series of compression creep tests combined with in-situ electrical measurement was performed on vertically-grown single crystal ZnO nanorods. Continuous measurement of the current (I)-voltage (V) curves before, during, after the creep tests revealed that I is non-negligibly increased as a result of the time-dependent deformation. Analysis of the I-V curves based on the thermionic emission-diffusion theory allowed extraction of nanorod resistance, which was shown to decrease as time-dependent deformation. Finally, based on the observations in this study, a simple analytical model for predicting the reduction in nanorod resistance as a function of creep strain that is induced from diffusional mechanisms is proposed, and this model was demonstrated to be in an excellent agreement with the experimental results. PMID:25982962

  11. Using carbon quantum dots to improve the resistive switching behavior of ZnO nanorods device

    NASA Astrophysics Data System (ADS)

    Wang, Xueliang; Xu, Jianping; Shi, Shaobo; Zhang, Xiaosong; Zhang, Xuguang; Shi, Xin; Li, Shubin; Li, Linlin; Liu, Xiaojuan; Li, Lan

    2016-01-01

    An electronic bistable device with a composite structure was fabricated using tapered ZnO nanorod arrays (ZnO NRs) coated with carbon quantum-dots (C QDs). With the addition of C QDs, the ON/OFF resistance ratio is 6 ×102, over 100 times higher than that of device with pristine ZnO NRs. The effect of C QDs on the resistive switching behavior was investigated by current-voltage (I-V) and capacitance-voltage (C-V) characterization. The conduction mechanisms of the devices were discussed using space charge limited current (SCLC) model.

  12. Hydrogen peroxide generation and photocatalytic degradation of estrone by microstructural controlled ZnO nanorod arrays

    NASA Astrophysics Data System (ADS)

    Liu, Yangsi; Han, Jie; Qiu, Wei; Gao, Wei

    2012-12-01

    The strong oxidant, hydrogen peroxide (H2O2), generated by ZnO nanorod arrays under UV light irradiation was monitored by fluorescence analysis. The ZnO nanorod arrays were synthesized via a low temperature hydrothermal method and their dimensions, i.e., diameter and height, can be controlled by adjusting the concentration of zinc nitrate (Zn(NO3)2·6H2O) and hexamethylenetetramine (HMT). The morphology, nanostructure, surface roughness and optical property were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), atomic force microscopy (AFM) and transmittance spectra, respectively. The ZnO nanorod arrays were applied in the degradation of estrone, which is an emerging steroid estrogen contaminant. The results revealed that the ZnO nanorod array produced from 25 mM Zn2+ and HMT had the highest aspect ratio, the largest surface roughness and the lowest band gap energy, which was beneficial to the efficiency of UV light utilization, photocatalytic degradation of estrone and H2O2 generation.

  13. A potentiometric biosensor for the detection of notch 3 using functionalized ZnO nanorods.

    PubMed

    Ibupoto, Z H; Khun, K; Liu, X; Willander, M

    2014-09-01

    The notch signalling plays a vital and radical role for the activity of cellular proliferation, differentiation and apoptosis. In this study, for the first time a particular biosensor is developed for the detection of notch 3. ZnO nanorods were fabricated on the gold coated glass substrate by hydrothermal method and afterwards were decorated with the gold nanoparticles by electrodepositing technique. Scanning electron microscopy (SEM) has shown the perpendicular to the substrate growth pattern of ZnO nanorods. X-ray diffraction (XRD) studies showed the c-axis oriented growth direction with wurtzite crystal structure of ZnO nanorods. X-ray Photoelectron Spectroscopy (XPS) and energy dispersive X-ray (EDX) techniques have shown the presence of Zn, O and Au atoms in the prepared functional material. Furthermore, the anti-notch 3 was physically adsorbed on the gold nanoparticles functionalized ZnO nanorods. The developed potentiometric immunosensor has shown response to the wide range of notch 3 molecules. The detected range included 1.00 x 10(-5)-1.50 x 10(0 ) μg/mL with a sensitivity of 23.15 ± 0.31 mV/decade. The analytical parameters including reproducibility, stability, and selectivity were also investigated and the observed results indicate the acceptable performance of the notch 3 biosensor. Moreover, the proposed notch 3 biosensor exhibited a fast response time of 10 s. PMID:25924320

  14. The effects of surface stripping ZnO nanorods with argon bombardment

    NASA Astrophysics Data System (ADS)

    Barnett, Chris J.; Kryvchenkova, Olga; Smith, Nathan A.; Kelleher, Liam; Maffeis, Thierry G. G.; Cobley, Richard J.

    2015-10-01

    ZnO nanorods are used in devices including field effects transistors, piezoelectric transducers, optoelectronics and gas sensors. However, for efficient and reproducible device operation and contact behaviour, surface contaminants must be removed or controlled. Here we use low doses of argon bombardment to remove surface contamination and make reproducible lower resistance contacts. Higher doses strip the surface of the nanorods allowing intrinsic surface measurements through a cross section of the material. Photoluminescence finds that the defect distribution is higher at the near-surface, falling away in to the bulk. Contacts to the n-type defect-rich surface are near-Ohmic, whereas stripping away the surface layers allows more rectifying Schottky contacts to be formed. The ability to select the contact type to ZnO nanorods offers a new way to customize device behaviour.

  15. The effects of surface stripping ZnO nanorods with argon bombardment.

    PubMed

    Barnett, Chris J; Kryvchenkova, Olga; Smith, Nathan A; Kelleher, Liam; Maffeis, Thierry G G; Cobley, Richard J

    2015-10-16

    ZnO nanorods are used in devices including field effects transistors, piezoelectric transducers, optoelectronics and gas sensors. However, for efficient and reproducible device operation and contact behaviour, surface contaminants must be removed or controlled. Here we use low doses of argon bombardment to remove surface contamination and make reproducible lower resistance contacts. Higher doses strip the surface of the nanorods allowing intrinsic surface measurements through a cross section of the material. Photoluminescence finds that the defect distribution is higher at the near-surface, falling away in to the bulk. Contacts to the n-type defect-rich surface are near-Ohmic, whereas stripping away the surface layers allows more rectifying Schottky contacts to be formed. The ability to select the contact type to ZnO nanorods offers a new way to customize device behaviour. PMID:26390967

  16. Surface chemistry and surface electronic properties of ZnO single crystals and nanorods

    SciTech Connect

    Uhlrich, J. J.; Olson, D. C.; Hsu, J. W. P.; Kuech, T. F.

    2009-03-15

    The surface chemistry of ZnO single crystals of (0001) and (1010) orientations and ZnO nanorods was studied using x-ray and ultraviolet photoelectron spectroscopies. Air drying and UV-ozone preparations were studied in particular as chemical treatments that could be applied to poly(3-hexylthiophene) (P3HT)-ZnO solar cells to enhance performance. The UV-ozone treatment showed negligible effect by photoelectron spectroscopy on the ZnO single crystal surfaces, but brought about electronic shifts consistent with increased upward band bending by {approx}0.25 eV on the ZnO nanorod surface. Modest interface dipoles of {approx}0.15 and {approx}0.25 eV were measured between P3HT and the (1010) and (0001) single crystal orientations, respectively, with the dipole moment pointing from ZnO to the P3HT layer. The sol-gel films showed evidence of forming a small interface dipole in the opposite direction, which illustrates the difference in surface chemistry between the solution-grown ZnO and the ZnO single crystals.

  17. ZnO nanorod growth by plasma-enhanced vapor phase transport with different growth durations

    SciTech Connect

    Kim, Chang-Yong; Oh, Hee-bong; Ryu, Hyukhyun; Yun, Jondo; Lee, Won-Jae

    2014-09-01

    In this study, the structural properties of ZnO nanostructures grown by plasma-enhanced vapor phase transport (PEVPT) were investigated. Plasma-treated oxygen gas was used as the oxygen source for the ZnO growth. The structural properties of ZnO nanostructures grown for different durations were measured by scanning electron microscopy, x-ray diffraction, and transmission electron microscopy. The authors comprehensively analyzed the growth of the ZnO nanostructures with different growth durations both with and without the use of plasma-treated oxygen gas. It was found that PEVPT has a significant influence on the growth of the ZnO nanorods. PEVPT with plasma-treated oxygen gas facilitated the generation of nucleation sites, and the resulting ZnO nanorod structures were more vertical than those prepared by conventional VPT without plasma-treated oxygen gas. As a result, the ZnO nanostructures grown using PEVPT showed improved structural properties compared to those prepared by the conventional VPT method.

  18. Fabrication of ZnO nanorod using spray-pyrolysis and chemical bath deposition method

    SciTech Connect

    Ramadhani, Muhammad F. Pasaribu, Maruli A. H. Yuliarto, Brian Nugraha

    2014-02-24

    ZnO thin films with nanorod structure were deposited using Ultrasonic Spray Pyrolysis method for seed growth, and Chemical Bath Deposition (CBD) for nanorod growth. High purity Zn-hydrate and Urea are used to control Ph were dissolved in ethanol and aqua bidest in Ultrasonic Spray Pyrolysis process. Glass substrate was placed above the heater plate of reaction chamber, and subsequently sprayed with the range duration of 5, 10 and 20 minutes at the temperatures of 3500 C. As for the Chemical Bath Deposition, the glass substrate with ZnO seed on the surface was immerse to Zn-hydrate, HMTA (Hexa Methylene Tetra Amine) and deionized water solution for duration of 3, 5 and 7 hour and temperatures of 600 C, washed in distilled water, dried, and annealed at 3500 C for an hour. The characterization of samples was carried out to reveal the surface morphology using Scanning Electron Microscopy (SEM). From the data, the combination of 5 minutes of Ultrasonic Spray Pyrolysis process and 3 hour of CBD has showed the best structure of nanorod. Meanwhile the longer Spraying process and CBD yield the bigger nanorod structure that have been made, and it makes the films more dense which make the nanorod collide each other and as a result produce unsymetric nanorod structure.

  19. Dispersion and Alignment of CdSe Nanorods in Polymer Nanocomposites

    NASA Astrophysics Data System (ADS)

    Rasin, Boris; Frischknecht, Amalie; Diroll, Benjamin; Tsai, Lindsay; Murray, Christopher; Composto, Russell

    2014-03-01

    The thermodynamic factors that affect the dispersion of polymer-brush grafted nanorods (NR) added to homopolymer matrix films have been studied by both experiments and theory. Whereas prior studies have focused on gold nanorods with fixed diameter (12nm-16nm) and varying length (37nm to 98 nm), these studies investigate the smaller diameter (4 nm) CdSe nanorods with length 27 nm to determine if nanorod curvature increases wetting between brush and matrix chains. Here we investigate two chemically similar brush / matrix systems polystyrene (PS)-NR / PS and poly(ethylene oxide) (PEO)-NR/PEO as a function of matrix to brush degree of polymerization, P/N. For the PS-NR / PS system for P/N =.5 the nanorods observed in the polymer matrix are primarily either individual nanorods or individual chains of end to end positioned nanorods. For P/N =13 aggregates consisting of side to side positioned nanorods and side to side positioned nanorod chains are observed. Individual nanorods and individual nanorod chains are also observed. The transition from wet to dry brush is explored and compared with the gold NR studies as well as density functional theory calculations. The effect of electrical field alignment on nanorod orientation is also presented.

  20. Fabrication of ZnO nanorods and assessment of changes in optical and gas sensing properties by increasing their lengths

    NASA Astrophysics Data System (ADS)

    Mehrabian, Masood; Mirabbaszadeh, Kavoos; Afarideh, Hossein

    2013-12-01

    We report a low-temperature process to synthesize highly oriented arrays of ZnO nanorods, based on the epitaxial growth of the ZnO seed layer at a low temperature of 70 °C. The ZnO seed layer was deposited by sol-gel process under mild conditions on the glass substrates. The morphologies and crystal structures of the film and nanorods were characterized by x-ray diffraction and scanning electron microscopy, respectively. ZnO nanorods were grown on ZnO seed layers by hydrothermal method. The effect of growth period on the morphology and optical characteristics (e.g. optical transmission and band-gap energy), hydrophilicity and gas sensing properties of the grown ZnO seed layer (film) and nanorods were investigated. The long nanorods on the seed layer were observed. The increase in the length of the nanorods resulted in a significant reduction in the optical band-gap energy of the nanorods, which was attributed to the formation of further defects in the nanorods during their fast growth. The surface of the ZnO nanorods grown for 6 h was relatively hydrophilic (with a water contact angle of 18°). The fabricated sensors were used to gauge different concentrations of ethanol vapor in the air at different temperatures and evaluated the surface resistance of the sensors as a function of operating temperature and ethanol concentrations. The results showed that the sensitivity of the nanorods changed from 1.3 to 6 (at 300 °C) by increasing the growth period.

  1. Fabrication and properties of ZnO nanorods within silicon nanostructures for solar cell application

    NASA Astrophysics Data System (ADS)

    Feng, Zezeng; Jia, Rui; Dou, Bingfei; Li, Haofeng; Jin, Zhi; Liu, Xinyu; Li, Feng; Zhang, Wei; Wu, Chenyang

    2015-02-01

    ZnO nanorods (NRs) were synthesized via a two-step hydrothermal method on silicon (Si) nano-textured solar cells. The optical and photovoltaic properties of silicon nanostructures coated with ZnO NRs were measured and discussed. It was found that silicon nanostructures combined with ZnO NRs can maximize the light absorption and significantly enhance the electrode contact and carrier transport ability. The series resistance was reduced from 0.98 Ω to 0.45 Ω, and short circuit current density was dramatically increased from 22.5 mA/cm2 to 27.9 mA/cm2 due to the incorporation of the ZnO NRs. The experimental results show the potential of ZnO NRs' application to the enhancement of the performance of nano-textured solar cells.

  2. Study of the structural and luminescent properties of ZnO nanorod arrays with hydrogen peroxide treatment

    NASA Astrophysics Data System (ADS)

    Su, Wen-Yan; Lin, Ching-Fuh

    2008-08-01

    One-dimensional nanostructures, such as nanowires, nanoneedles, nanobelts and nanotubes, have been extensively studied in recent years. These fascinating structures have the excellent physical properties owing to their geometry with high aspect ratio and modify the light-matter interaction. However, the defects of these structures are the obstacles for the practical applications. We report the influence of the hydrogen peroxide (H2O2) treatment on the point defects and structural defects of ZnO nanorods grown on n-type silicon. The ZnO nanorod arrays are prepared by low-cost hydrothermal method and the H2O2 treatments are investigated in two different approaches. One is to immerse ZnO nanorod samples into H2O2 solution. The other is a pre-treatment of spin-coating H2O2 solution on the seed layer before the growth of the ZnO nanorods. In the first approach, we found that the ultraviolet (UV) emission peak of the ZnO nanorods photoluminescence (PL) spectra was strongly dependent on the immersion time. In the second approach, the H2O2 solution not only influences the quality of the seed layer, but also the amount of the oxygen interstitial defects in the ZnO nanorods grown thereon. As a result, the UV emission intensity from the ZnO nanorods is enhanced almost five times. These effects are attributed to oxygen desorption through oxidation-reduction reactions of hydrogen peroxide on the ZnO surface. The ZnO nanorod arrays with few oxygen interstitial defects are prepared by low-cost and low-temperature hydrogen peroxide treatments, which are compatible with glass and polymer substrates and expected to enable the fabrication of optoelectronic device with excellent performance.

  3. Eradication of Multi-drug Resistant Bacteria by Ni Doped ZnO Nanorods: Structural, Raman and optical characteristics

    NASA Astrophysics Data System (ADS)

    Jan, Tariq; Iqbal, Javed; Ismail, Muhammad; Mansoor, Qaisar; Mahmood, Arshad; Ahmad, Amaar

    2014-07-01

    In this paper, ZnO nanorods doped with varying amounts of Ni have been prepared by chemical co-precipitation technique. Structural investigations provide the evidence that Ni is successfully doped into ZnO host matrix without having any secondary phases. Scanning electron microscopy (SEM) images reveal the formation of rodlike structure of undoped ZnO with average length and diameter of 1 μm and 80 nm, respectively. Raman spectroscopy results show that the E1LO phonons mode band shifts to the higher values with Ni doping, which is attributed to large amount of crystal defects. Ni doping is also found to greatly influence the optical properties of ZnO nanorods. The influence of Ni doping on antibacterial characteristics of ZnO nanorods have been studied by measuring the growth curves of Escherichia coli (E. coli), Methicillin-resistant Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa) bacteria in the presence of prepared nanorods. ZnO nanorods antibacterial potency is found to increase remarkably with Ni doping against S. aureus and P. aeruginosa microbials, which might possibly be due to the increase in reactive oxygen species (ROS) generation. Interestingly, it is observed that Ni doped ZnO nanorods completely eradicates these multi-drug resistant bacteria.

  4. Ag nanoparticles-decorated ZnO nanorod array on a mechanical flexible substrate with enhanced optical and antimicrobial properties.

    PubMed

    Chen, Yi; Tse, Wai Hei; Chen, Longyan; Zhang, Jin

    2015-01-01

    Heteronanostructured zinc oxide nanorod (ZnO NR) array are vertically grown on polydimethylsiloxane (PDMS) through a hydrothermal method followed by an in situ deposition of silver nanoparticles (Ag NPs) through a photoreduction process. The Ag-ZnO heterostructured nanorods on PDMS are measured with an average diameter of 160 nm and an average length of 2 μm. ZnO NRs measured by high-resolution transmission electron microscope (HRTEM) shows highly crystalline with a lattice fringe of 0.255 nm, which corresponds to the (0002) planes in ZnO crystal lattice. The average diameter of the Ag NPs in situ deposited on the ZnO NRs is estimated at 22 ± 2 nm. As compared to the bare ZnO NRs, the heterostructured Ag-ZnO nanorod array shows enhanced ultraviolet (UV) absorption at 440 nm, and significant emission in the visible region (λem = 542 nm). In addition, the antimicrobial efficiency of Ag-ZnO heterostructured nanorod array shows obvious improvement as compared to bare ZnO nanorod array. The cytotoxicity of ZnO nanorod array with and without Ag NPs was studied by using 3 T3 mouse fibroblast cell line. No significant toxic effect is imposed on the cells. PMID:25852401

  5. Rational synthetic strategy: From ZnO nanorods to ZnS nanotubes

    NASA Astrophysics Data System (ADS)

    Yi, Ran; Qiu, Guanzhou; Liu, Xiaohe

    2009-10-01

    We demonstrate here that ZnS nanotubes can be successfully synthesized via a facile conversion process from ZnO nanorods precursors. During the conversion process, ZnO nanorods are first prepared as sacrificial templates and then converted into tubular ZnO/ZnS core/shell naonocomposites through a hydrothermal sulfidation treatment by using thioacetamide (TAA) as sulfur source. ZnS nanotubes are finally obtained through the removal of ZnO cores of tubular ZnO/ZnS core/shell naonocomposites by KOH treatment. The photoluminescence (PL) characterization of the as-prepared products shows much enhanced PL emission of tubular ZnO/ZnS core/shell nanocomposites compared with their component counterparts. The probable mechanism of conversion process is also proposed based on the experimental results.

  6. Electrical characteristics of ZnO nanorods reinforced polymer nanocomposite thin films

    SciTech Connect

    Bhattacharjee, Snigdha; Roy, Asim

    2015-05-15

    ZnO nanorods have been prepared by simple chemical method, which is used to fabricate organic bistable devices (OBDs). OBDs are fabricated by incorporating different weight percent (wt %) of chemically synthesized Zinc Oxide (ZnO) nanorods into polymethylmethacrylate (PMMA). Current-voltage (I-V) measurements of the spin coated ZnO+PMMA nanocomopsite thin film on indium tin oxide (ITO) coated glass substrate showed current hysteresis behaviour, which is an indication of memory effect. The samples exhibit two distinct resistance states, ON and OFF states, characterised by relatively low and high resistance of the OBDs, respectively. It is also observed that with change in ZnO dopant concentration the value of ON/OFF current changes. Higher ON/OFF current ratio is desired for practical applications. Current conduction mechanism of the devices has been explained invoking various existing models, and it has been found that the trapped-charge-limited conduction mechanism was dominant in our samples.

  7. Orientation-Controllable ZnO Nanorod Array Using Imprinting Method for Maximum Light Utilization in Dye-Sensitized Solar Cells.

    PubMed

    Jeong, Huisu; Song, Hui; Lee, Ryeri; Pak, Yusin; Kumaresan, Yogeenth; Lee, Heon; Jung, Gun Young

    2015-12-01

    We present a holey titanium dioxide (TiO2) film combined with a periodically aligned ZnO nanorod layer (ZNL) for maximum light utilization in dye-sensitized solar cells (DSCs). Both the holey TiO2 film and the ZNL were simultaneously fabricated by imprint technique with a mold having vertically aligned ZnO nanorod (NR) array, which was transferred to the TiO2 film after imprinting. The orientation of the transferred ZNL such as laid, tilted, and standing ZnO NRs was dependent on the pitch and height of the ZnO NRs of the mold. The photoanode composed of the holey TiO2 film with the ZNL synergistically utilized the sunlight due to enhanced light scattering and absorption. The best power conversion efficiency of 8.5 % was achieved from the DSC with the standing ZNL, which represented a 33 % improvement compared to the reference cell with a planar TiO2. PMID:26068077

  8. ZnO Nanorod Thermoplastic Polyurethane Nanocomposites: Morphology and Shape Memory Performance

    SciTech Connect

    Koerner, H.; Kelley, J; George, J; Drummy, L; Mirau, P; Bell, N; Hsu, J; Vaia, R

    2009-01-01

    The impact of dispersed alkylthiol-modified ZnO nanorods, as a function of rod aspect ratio and concentration, on the shape memory character of a thermoplastic polyurethane with low hard-segment density (LHS-TPU) is examined relative to the enhanced performance occurring for carbon nanofiber (CNF) dispersion. Solution blending resulted in uniform dispersion within the LHS-TPU of the ZnO nanorods at low volume (weight) fractions (<2.9% v/v (17.75% w/w)). Tensile modulus enhancements were modest though, comparable to values observed for spherical nanofillers. Shape memory characteristics, which in this LHS-TPU result when strain-induced crystallites retard the entropic recovery of the deformed chains, were unchanged for these low volume fraction ZnO nanocomposites. Higher ZnO loadings (12% v/v (50% w/w)) exhibited clustering of ZnO nanorods into a mesh-like structure. Here, tensile modulus and shape recovery characteristics were improved, although not as great as seen for comparable CNF addition. Wide angle X-ray diffraction and NMR revealed that the addition of ZnO nanorods did not impact the inherent strain induced crystallization of the LHS-TPU, which is in contrast to the impact of CNFs and emphasizes the impact of interactions at the polymer-nanoparticle interface. Overall, these findings reinforce the hypothesis that the shape memory properties of polymer nanocomposites are governed by the extent to which nanoparticle addition, via nanoparticle aspect ratio, hierarchical morphology, and interfacial interactions, impacts the molecular mechanism responsible for trapping elastic strain.

  9. Effects of surface adsorbed oxygen, applied voltage, and temperature on UV photoresponse of ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Zong, Xian-Li; Zhu, Rong

    2015-10-01

    The ultraviolet (UV) photoresponses of ZnO nanorods directly grown on and between two micro Au-electrodes by using electric-field-assisted wet chemical method are measured comprehensively under different conditions, including ambient environment, applied bias voltage, gate voltage and temperature. Experimental results indicate that the photoresponses of the ZnO nanorods can be modulated by surface oxygen adsorptions, applied voltages, as well as temperatures. A model taking into account both surface adsorbed oxygen and electron-hole activities inside ZnO nanorods is proposed. The enhancement effect of the bias voltage on photoresponse is also analyzed. Experimental results shows that the UV response time (to 63%) of ZnO nanorods in air and at 59 °C could be shortened from 34.8 s to 0.24 s with a bias of 4 V applied between anode and cathode. Project supported by the National Natural Science Foundation of China (Grant No. 91123017).

  10. Facile construction of vertically aligned EuS-ZnO hybrid core shell nanorod arrays for visible light driven photocatalytic properties

    SciTech Connect

    Ranjith, K. S.; Kumar, D. Ranjith; Kumar, R. T. Rajendra

    2015-06-24

    We demonstrated the development of coupled semiconductor in the form of hybrid heterostructures for significant advancement in catalytic functional materials. In this article, we report the preparation of vertically aligned core shell ZnO-EuS nanorod photocatalyst arrays by a simple chemical solution process followed by sulfudation process. The XRD pattern confirmed formation of the hexagonal wurtzite structure of ZnO and cubic nature of the EuS. Cross sectional FESEM images show vertical rod array structure, and the size of the nanorods ranges from 80 to 120 nm. UV-Vis DRS spectra showed that the optical absorption of ZnO was significantly enhanced to the visible region by modification with EuS surfaces. TEM study confirmed that the surface of ZnO was drastically improved by the modification with EuS nanoparticle. The catalytic activity of EuS−ZnO core shell nanorod arrays were evaluated by the photodegradation of Methylene Blue (MB) dye under visible irradiation. The results revealed that the photocatalytic activity of EuS−ZnO was much higher than that of ZnO under natural sunlight. EuS−ZnO was found to be stable and reusable without appreciable loss of catalytic activity up to four consecutive cycles.

  11. Photoelectrochemical properties of ZnO nanorods decorated with Cu and Cu2O nanoparticles

    NASA Astrophysics Data System (ADS)

    Lakehal, Sihem; Achour, Slaymane; Ferrari, Claudio; Buffagni, Elisa; Rossi, Francesca; Fabbri, Filippo

    2014-08-01

    Cu2O and Cu nanoparticles (NPs) on ZnO nanorods (NRs) were fabricated by two-step process using efficient hydrothermal technique to deposit ZnO nanorods and microwave-irradiation method under ambient conditions to prepare Cu and Cu2O NPs dispersed in Diethyleneglycole. The structure and the morphology of these films were studied by X-ray diffraction (XRD), Transmission Electron Microscopy (TEM), Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX). The optical property was investigated by UV-Vis absorption spectroscopy and Cathodoluminescence (CL) techniques. Cu2O NPs/ZnO NRs heterojunction were produced by depositing Cu&Cu2O NPs on as-prepared ZnO NRs using spin-coating method. By changing the drying temperature the Cu metal reduce to Cu2O. In these kinds of heterojunctions, an n-type ZnO layer acts both as a host that chemically binds to the p-type Cu2O which could help in efficient electron-hole separation. The number of Cu2O NPs loaded onto the n-type ZnO layer increases the sensitivity in the visible region. The prepared heterojunctions show improved photocurrent with respect to bare ZnO NRs.

  12. Investigation of the phototoxic effect of ZnO nanorods on fibroblasts and melanoma human cells

    NASA Astrophysics Data System (ADS)

    Kishwar, S.; Siddique, M.; Israr-Qadir, M.; Nur, O.; Willander, M.; Öllinger, K.

    2014-11-01

    Photocytotoxic effects of as-grown and zinc oxide (ZnO) nanorods coated with 5-aminolevulinic acid (ALA) have been studied on human cells, i.e. melanoma and foreskin fibroblast, under dark and ultraviolet light exposures. Zinc oxide nanorods have been grown on the very sharp tip (diameter = 700 nm) of borosilicate glass pipettes and then were coated by the photosensitizer for targeted investigations inside human cells. The coated glass pipette’s tip with photosensitizer has been inserted inside the cells with the help of a micro-manipulator and irradiated through ultraviolet light (UVA), which reduces the membrane potential of the mitochondria leading to cell death. Cell viability loss has been detected by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) reduction assay when exposed to the dissolved ZnO nanorods and the production of the reactive oxygen species (ROS) has been detected along with the enhanced cytotoxic effect under UVA irradiation. Additionally, the influence of the lipid soluble antioxidant vitamin E and water-soluble N-acetyl-cysteine toward the enhancement or reduction of the toxicity has been investigated. A comparative analysis of the toxic nature of ZnO nanorods has been drawn between normal human fibroblast and melanoma cells, which can be favorable for understanding the clinical setting for killing tumor cells.

  13. Hydrothermal synthesis, characterizations and photoluminescence study of single crystalline hexagonal ZnO nanorods with three dimensional flowerlike microstructures

    NASA Astrophysics Data System (ADS)

    Kale, Rohidas B.; Hsu, Yung-Jung; Lin, Yi-Feng; Lu, Shih-Yuan

    2014-05-01

    A simple, low-cost, and environmentally benign hydrothermal approach has been successfully developed to synthesize uniform, large-scale well-crystallized ZnO nanorods with different aspect ratios that were united together to form three dimensional (3D) flowerlike structures. The method involved direct growth of ZnO 3D microstructures using aqueous solution of Zn(CH3COO)2 as the precursor and NaOH to adjust the pH of resultant solution. Surfactants or templates were not used during the entire synthetic process. Moreover, the morphology evolution of the ZnO nanorods with reaction time suggests a recrystallization-dissolution-growth mechanism that continuously takes place for prolonged interval of time. The XRD pattern of the as-grown ZnO nanorods and relevant analyses confirm the well crystallized hexagonal structure of the ZnO microstructures and no evidence of any other impurity phases. SEM observations reveal that the ZnO product grew in the form of nanorods that were united together to form 3D flowerlike morphology. The high resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED) shows that the ZnO nanorods were single crystalline and grew along the c-axis of the crystal plane. PL measurements of the as-synthesized nanorods exhibit excellent excitation features and strong band-edge UV luminescence even at room temperature. The uniform single crystalline, defect free, and high aspect ratio nanorods may find promising applications in optoelectronics and photo-catalysts. The growth habit of ZnO crystal is also illustrated. This method is suitable for large-scale production of ZnO microstructures and could be extended for syntheses of other metal oxides.

  14. Novel Gas Sensor Based on ZnO Nanorod Circular Arrays for C2H5OH Gas Detection.

    PubMed

    Jianjiao, Zhang; Hongyan, Yue; Erjun, Guo; Shaolin, Zhang; Liping, Wang; Chunyu, Zhang; Xin, Gao; Jing, Chang; Hong, Zhang

    2015-03-01

    Novel side-heating gas sensor based on ZnO nanorod circular arrays was firstly fabricated by hydrothermal treatment assisted with a kind of simple dip-coating technique. The structure and morphologies of ZnO nanorods were characterized by X-ray diffraction (XRD), Scanning Electron Microscope (SEM), respectively. XRD result indicates that the obtained ZnO nanorods have good crystalline with the hexagonal wurtzite structure. SEM result indicates that ZnO nanorod arrays are vertically growth on the surface of ceramic tube of side-heating sensor with controlled diameter and length, narrow size distribution and high orientation. The gas sensing properties of ZnO nanorod circular arrays are also evaluated. Comparative to the sensor based on scattered ZnO nanorods responding to 25 ppm H2, CO, C6H5CH3 and C2H5OH gas, respectively, the sensing values of high orientation gas sensor are generally increased by 5%. This novel sensor has good application promising for the fabrication of cost effective and high performance gas sensors. PMID:26413689

  15. ZnO nanorods as catalyts for biodiesel production from olive oil

    NASA Astrophysics Data System (ADS)

    Molina, Carmen Maria Miralda

    The motivation to determine a viable alternative to petroleum based energy has risen in recent years due to increased greenhouse gas emissions, environmental pollution, and the fear of exhausting oil and natural gas reserves. Biodiesel derived from the transesterification of vegetable oils or animal fats has emerged as a viable alternative to petroleum diesel. However, for this to become an option available to the average consumer it is vital to find an effective catalyst. Metal oxides have emerged as potential heterogeneous catalysts. ZnO in particular is attractive because it is abundant. The use of nanostructures has been shown to improve the catalytic performance of ZnO. ZnO nanorods were synthesized using a solution approach. The crystalline structure, morphology, and surface area were confirmed using XRD, SEM, and BET surface area respectively. The characterized nanorods were used as catalysts for the production of biodiesel. The nanorods achieved conversions of 94.8% at 150°C for reaction times of eight hours. They also demonstrated better catalytic performance, attributed to their increased degree of crystallinity, than conventional ZnO. A kinetic study at 150°C to determine the reaction rate parameters was also conducted. Due to the presence of three distinct phases in the reaction, initially the reaction rate is dominated by mass transfer limitations. However, these are eventually overcome and the reaction proceeds with a pseudo-first order with respect to the oil and a reaction rate constant of 0.5136 h-1.

  16. Annealing effect on the photoluminescence properties of ZnO nanorod array prepared by a PLD-assistant wet chemical method

    SciTech Connect

    Wei Sufeng; Lian Jianshe; Wu Hua

    2010-11-15

    Well-aligned ZnO nanorod arrays were synthesized by a wet chemical method on the glass substrate with ZnO thin film as seed layer prepared by pulsed laser deposition. The effect of annealing temperature on the luminescence characteristics was investigated. As the annealing temperature increased, the photoluminescence properties show a general enhancing tendency. The nanorod array with high ultraviolet emission and negligible visible light emission (designated by the photoluminescence intensity ratio of ultraviolet to visible emission of 66.4) is obtained by annealing the sample at 700 deg. C for 1 h. Based on the results of X-ray photoelectron spectroscopy and photoluminescence spectra, the mechanisms of visible emission were discussed. - Research Highlights: {yields} ZnO nanorod array with good crystallography, low defects concentration and good optical property was obtained after annealed at 700 deg. C for 1 h. {yields} The transition from the conduction band to the O{sub i} level may be responsible for the yellow-green emission. {yields} The yellow emission may originate from the presence of Zn(OH){sub 2} on the surface or the band transition from conduction band to V{sub o}Zn{sub i} level. {yields} The transition from the Zn{sub i} level to the level should produce an orange emission or an orange-red emission.

  17. Photoelectrocatalytic activity of a hydrothermally grown branched Zno nanorod-array electrode for paracetamol degradation.

    PubMed

    Lin, Chin Jung; Liao, Shu-Jun; Kao, Li-Cheng; Liou, Sofia Ya Hsuan

    2015-06-30

    Hierarchical branched ZnO nanorod (B-ZnR) arrays as an electrode for efficient photoelectrocatalytic degradation of paracetamol were grown on fluorine-doped tin oxide substrates using a solution route. The morphologic and structural studies show the ZnO trunks are single-crystalline hexagonal wurtzite ZnO with a [0001] growth direction and are densely covered by c-axis-oriented ZnO branches. The obvious enhancement in photocurrent response of the B-ZnR electrode was obtained than that in the ZnO nanoparticle (ZnO NP) electrode. For the photoelectrocatalytic degradation of paracetamol in 20 h, the conversion fraction of the drug increased from 32% over ZnO NP electrode to 62% over B-ZnR arrays with about 3-fold increase in initial reaction rate. The light intensity-dependent photoelectrocatalytic experiment indicated that the superior performance over the B-ZnR electrode was mainly ascribed to the increased specific surface area without significantly sacrificing the charge transport and pollutant diffusion efficiencies. Two aromatic intermediate compounds were observed and eventually converted into harmless carboxylic acids and ammonia. Hierarchical tree-like ZnO arrays can be considered effective alternatives to improve photoelectro degradation rates without the need for expensive additives. PMID:25748997

  18. Enhanced ethanol sensing properties of TiO2/ZnO core-shell nanorod sensors

    NASA Astrophysics Data System (ADS)

    Park, Sunghoon; An, Soyeon; Ko, Hyunsung; Lee, Sangmin; Kim, Hyoun Woo; Lee, Chongmu

    2014-06-01

    TiO2-core/ZnO-shell nanorods were synthesized using a two-step process: the synthesis of TiO2 nanorods using a hydrothermal method followed by atomic layer deposition of ZnO. The mean diameter and length of the nanorods were ˜300 nm and ˜2.3 μm, respectively. The cores and shells of the nanorods were monoclinic-structured single-crystal TiO2 and wurtzite-structured single-crystal ZnO, respectively. The multiple networked TiO2-core/ZnO-shell nanorod sensors showed responses of 132-1054 % at ethanol (C2H5OH) concentrations ranging from 5 to 25 ppm at 150 ∘C. These responses were 1-5 times higher than those of the pristine TiO2 nanorod sensors at the same C2H5OH concentration range. The substantial improvement in the response of the pristine TiO2 nanorods to C2H5OH gas by their encapsulation with ZnO may be attributed to the enhanced absorption and dehydrogenation of ethanol. In addition, the enhanced sensor response of the core-shell nanorods can be attributed partly to changes in resistance due to both the surface depletion layer of each core-shell nanorod and the potential barriers built in the junctions caused by a combination of homointerfaces and heterointerfaces.

  19. Site-specific multi-stage CVD of large-scale arrays of ultrafine ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Zhang, X. X.; Zhao, D.; Gao, M.; Dong, H. B.; Zhou, W. Y.; Xie, S. S.

    2011-04-01

    Multi-stage growth of ZnO nanorod arrays has been carried out by Au-assisted chemical vapor deposition (CVD) in order to better understand and more precisely control the growth behaviors. It is evidenced that Au-catalyzed vapor-liquid-solid (VLS) growth only dominates the initial site-specific nucleation of the nanorods, while the subsequent growth is governed by a vapor-solid (VS) epitaxy mechanism. The sequential VLS and VS behaviors permit the fabrication of large-scale highly ordered arrays of ZnO nanorods with precisely tunable diameters and embedded junctions by controlling reactant concentration and nanorod top morphology. Based on the above results, two routes to fabricate ultrafine ZnO nanorod arrays are proposed and stepwise nanorod arrays with ultrafine top segment (~10 nm in diameter) have been achieved. Temperature-dependent photoluminescence (PL) and spatial resolved PL were carried out on the nanorod arrays and on individual nanorods, indicating high quality optical properties and tunable light emission along the length of the stepwise nanorods.

  20. Aligned silver nanorod arrays as substrates for surface-enhanced infrared absorption spectroscopy.

    PubMed

    Leverette, C L; Jacobs, S A; Shanmukh, S; Chaney, S B; Dluhy, R A; Zhao, Y-P

    2006-08-01

    Preferentially aligned silver nanorod arrays prepared by oblique angle vapor deposition were evaluated as substrates for surface-enhanced infrared absorption (SEIRA) spectroscopy. These nanorod arrays have an irregular surface lattice and are composed of tilted, cylindrically shaped nanorods that have an average length of 868 nm +/- 95 nm and an average diameter of 99 nm +/- 29 nm. The overall enhancement factor for chemisorbed organic films of para-nitrobenzoic acid (PNBA) deposited onto the Ag nanorod arrays analyzed by external reflection SEIRA was calculated to be 31 +/- 9 compared to infrared reflection-absorption spectroscopy (IRRAS) obtained from a 500 nm Ag film substrate. This enhancement is attributed to the unique optical properties of the nanorod arrays as well as the increased surface area provided by the nanorod substrate. SEIRA reflection-absorbance intensity was observed with both p- and s-polarized incident radiation with angles of incidence ranging from 25 degrees to 80 degrees . The largest intensity was achieved with p-polarization and incident angles larger than 75 degrees . Polarization-dependent ultraviolet/visible/near-infrared (UV/Vis/NIR) spectra of the nanorod arrays demonstrate that the red-shifted surface plasmon peaks of the elongated nanorods may be partially responsible for the observed SEIRA response. The SEIRA detection limit for the Ag nanorod arrays was estimated to be 0.08 ng/cm(2). Surface-enhanced Raman scattering (SERS) and SEIRA analysis of chemisorbed PNBA utilizing the same nanorod substrate is demonstrated. PMID:16925927

  1. Thiol dosing of ZnO single crystals and nanorods: Surface chemistry and photoluminescence

    NASA Astrophysics Data System (ADS)

    Singh, Jagdeep; Im, Jisun; Watters, Evan J.; Whitten, James E.; Soares, Jason W.; Steeves, Diane M.

    2013-03-01

    Adsorption of thiols on ZnO(0001) and ZnO nanorods has been investigated using X-ray and ultraviolet photoelectron spectroscopies (XPS and UPS). Ultrahigh vacuum (UHV) dosing of sputter-cleaned ZnO(0001) with methanethiol (MT), 1-dodecanethiol (DDT), and 3-mercaptopropyltrimethoxysilane (MPTMS) leads to S2p peaks with a binding energy of 163.3 eV. Similar results for MPTMS are obtained for sputter-cleaned ZnO(0001) that is pre-dosed with water to form hydroxyl groups. In all cases, the absence of a free thiol S2p peak at 164.2 eV indicates that bonding to the surface occurs via the thiol end of the molecule. A DDT-dosed ZnO(0001) sample stored for 10 days in UHV and heated to temperatures as high as 150 °C exhibits minimal changes in its S/Zn atomic ratio, confirming chemisorption and the presence of a strong bond to the surface. UPS shows that MT adsorption on sputtered ZnO(0001) leads to a 0.7 eV increase in work function and perturbation of the MT molecular orbitals, again consistent with chemisorption. Dry ZnO nanorods have been exposed to MT while monitoring their photoluminescence. XPS and Raman spectroscopy confirm thiol adsorption. Relative to dry ZnO, adsorption causes a decrease in intensity of the visible emission peak, but the UV peak remains unchanged. These results indicate that Znsbnd S bond formation quenches radiative decay to the valence band from defect states, possibly by methanethiolate adsorption filling oxygen vacancies.

  2. Synthesis and characterization of ZnO and Ni doped ZnO nanorods by thermal decomposition method for spintronics application

    SciTech Connect

    Saravanan, R.; Santhi, Kalavathy; Sivakumar, N.; Narayanan, V.; Stephen, A.

    2012-05-15

    Zinc oxide nanorods and diluted magnetic semiconducting Ni doped ZnO nanorods were prepared by thermal decomposition method. This method is simple and cost effective. The decomposition temperature of acetate and formation of oxide were determined by TGA before the actual synthesis process. The X-ray diffraction result indicates the single phase hexagonal structure of zinc oxide. The transmission electron microscopy and scanning electron microscopy images show rod like structure of ZnO and Ni doped ZnO samples with the diameter {approx} 35 nm and the length in few micrometers. The surface analysis was performed using X-ray photoelectron spectroscopic studies. The Ni doped ZnO exhibits room temperature ferromagnetism. This diluted magnetic semiconducting Ni doped ZnO nanorods finds its application in spintronics. - Highlights: Black-Right-Pointing-Pointer The method used is very simple and cost effective compared to all other methods for the preparation DMS materials. Black-Right-Pointing-Pointer ZnO and Ni doped ZnO nanorods Black-Right-Pointing-Pointer Ferromagnetism at room temperature.

  3. Fabrication and characterization of ZnO nanorods/p-6H-SiC heterojunction LED by microwave-assisted chemical bath deposition

    NASA Astrophysics Data System (ADS)

    Hassan, J. J.; Mahdi, M. A.; Ramizy, Asmiet; Abu Hassan, H.; Hassan, Z.

    2013-01-01

    High-quality vertically aligned zinc oxide nanorods were successfully grown on p-type 6H-SiC substrate by microwave-assisted chemical bath deposition. The novel seed material poly(vinyl alcohol)-Zn(OH)2 nanocomposites was used to seed the 6H-SiC substrate. X-ray diffraction analysis and field emission scanning electron microscopy showed that the synthesized ZnO nanorods were vertically well aligned in the direction of the (0 0 2) plane of the hexagonal structure. The optical properties were examined by photoluminescence spectroscopy, which showed a high-intensity UV peak compared with visible defect peaks. The current-voltage property proved the good rectifier characteristic of the n-type ZnO nanorod/p-type SiC diode heterojunction. The electroluminescence emission of the heterojunction LED was sufficiently high to be seen with the naked eye, with a broad peak centered at the green part of the visible spectrum.

  4. Growth and optical properties of ZnO nanorod arrays on Al-doped ZnO transparent conductive film

    PubMed Central

    2013-01-01

    ZnO nanorod arrays (NRAs) on transparent conductive oxide (TCO) films have been grown by a solution-free, catalyst-free, vapor-phase synthesis method at 600°C. TCO films, Al-doped ZnO films, were deposited on quartz substrates by magnetron sputtering. In order to study the effect of the growth duration on the morphological and optical properties of NRAs, the growth duration was changed from 3 to 12 min. The results show that the electrical performance of the TCO films does not degrade after the growth of NRAs and the nanorods are highly crystalline. As the growth duration increases from 3 to 8 min, the diffuse transmittance of the samples decreases, while the total transmittance and UV emission enhance. Two possible nanorod self-attraction models were proposed to interpret the phenomena in the sample with 9-min growth duration. The sample with 8-min growth duration has the highest total transmittance of 87.0%, proper density about 75 μm−2, diameter about 26 nm, and length about 500 nm, indicating that it can be used in hybrid solar cells. PMID:23566567

  5. Engineering safer-by-design, transparent, silica-coated ZnO nanorods with reduced DNA damage potential.

    PubMed

    Sotiriou, Georgios A; Watson, Christa; Murdaugh, Kimberly M; Darrah, Thomas H; Pyrgiotakis, Georgios; Elder, Alison; Brain, Joseph D; Demokritou, Philip

    2014-04-01

    Zinc oxide (ZnO) nanoparticles absorb UV light efficiently while remaining transparent in the visible light spectrum rendering them attractive in cosmetics and polymer films. Their broad use, however, raises concerns regarding potential environmental health risks and it has been shown that ZnO nanoparticles can induce significant DNA damage and cytotoxicity. Even though research on ZnO nanoparticle synthesis has made great progress, efforts on developing safer ZnO nanoparticles that maintain their inherent optoelectronic properties while exhibiting minimal toxicity are limited. Here, a safer-by-design concept was pursued by hermetically encapsulating ZnO nanorods in a biologically inert, nanothin amorphous SiO2 coating during their gas-phase synthesis. It is demonstrated that the SiO2 nanothin layer hermetically encapsulates the core ZnO nanorods without altering their optoelectronic properties. Furthermore, the effect of SiO2 on the toxicological profile of the core ZnO nanorods was assessed using the Nano-Cometchip assay by monitoring DNA damage at a cellular level using human lymphoblastoid cells (TK6). Results indicate significantly lower DNA damage (>3 times) for the SiO2-coated ZnO nanorods compared to uncoated ones. Such an industry-relevant, scalable, safer-by-design formulation of nanostructured materials can liberate their employment in nano-enabled products and minimize risks to the environment and human health. PMID:24955241

  6. Engineering safer-by-design, transparent, silica-coated ZnO nanorods with reduced DNA damage potential

    PubMed Central

    Sotiriou, Georgios A.; Watson, Christa; Murdaugh, Kimberly M.; Darrah, Thomas H.; Pyrgiotakis, Georgios; Elder, Alison; Brain, Joseph D.; Demokritou, Philip

    2014-01-01

    Zinc oxide (ZnO) nanoparticles absorb UV light efficiently while remaining transparent in the visible light spectrum rendering them attractive in cosmetics and polymer films. Their broad use, however, raises concerns regarding potential environmental health risks and it has been shown that ZnO nanoparticles can induce significant DNA damage and cytotoxicity. Even though research on ZnO nanoparticle synthesis has made great progress, efforts on developing safer ZnO nanoparticles that maintain their inherent optoelectronic properties while exhibiting minimal toxicity are limited. Here, a safer-by-design concept was pursued by hermetically encapsulating ZnO nanorods in a biologically inert, nanothin amorphous SiO2 coating during their gas-phase synthesis. It is demonstrated that the SiO2 nanothin layer hermetically encapsulates the core ZnO nanorods without altering their optoelectronic properties. Furthermore, the effect of SiO2 on the toxicological profile of the core ZnO nanorods was assessed using the Nano-Cometchip assay by monitoring DNA damage at a cellular level using human lymphoblastoid cells (TK6). Results indicate significantly lower DNA damage (>3 times) for the SiO2-coated ZnO nanorods compared to uncoated ones. Such an industry-relevant, scalable, safer-by-design formulation of nanostructured materials can liberate their employment in nano-enabled products and minimize risks to the environment and human health. PMID:24955241

  7. Bending effects of ZnO nanorod metal–semiconductor–metal photodetectors on flexible polyimide substrate

    PubMed Central

    2012-01-01

    The authors report the fabrication and I-V characteristics of ZnO nanorod metal–semiconductor–metal photodetectors on flexible polyimide substrate. From field-emission scanning electron microscopy and X-ray diffraction spectrum, ZnO nanorods had a (0002) crystal orientation and a wurtzite hexagonal structure. During the I-V and response measurement, the flexible substrates were measured with (i.e., the radius of curvatures was 0.2 cm) and without bending. From I-V results, the dark current decreased, and the UV-to-visible rejection ratio increased slightly in bending situation. The decreasing tendency of the dark current under bending condition may be attributed to the increase of the Schottky barrier height. PMID:22494967

  8. Highly active lanthanum doped ZnO nanorods for photodegradation of metasystox.

    PubMed

    Korake, P V; Dhabbe, R S; Kadam, A N; Gaikwad, Y B; Garadkar, K M

    2014-01-01

    La-doped ZnO nanorods with different La contents were synthesized by microwave assisted method and characterized by various sophisticated techniques such as XRD, UV-Vis., EDS, XPS, SEM and TEM. The XRD patterns of the La-doped ZnO indicate hexagonal crystal structure with an average crystallite size of 30nm. It was found that the crystallite size of La-doped ZnO is much smaller as compared to pure ZnO and decreases with increasing La content. The photocatalytic activity of 0.5mol% La-doped ZnO in the degradation of metasystox was studied. It was observed that degradation efficiency of metasystox over La-doped ZnO increases up to 0.5mol% doping then decreases for higher doping levels. Among the catalyst studied, the 0.5mol% La-doped ZnO was the most active, showing high photocatalytic activity for the degradation of metasystox. The maximum reduction of concentration of metasystox was observed under static condition at pH 8. Reduction in the Chemical Oxygen Demand (COD) of metasystox was observed after 150min. The cytotoxicological studies of meristematic root tip cells of Allium cepa were studied. The results obtained indicate that photocatalytically degraded products of metasystox were less toxic as compared to metasystox. PMID:24231392

  9. Enhanced UV absorbance and photoluminescence properties of ultrasound assisted synthesized gold doped ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Sahu, Dojalisa; Panda, N. R.; Acharya, B. S.; Panda, A. K.

    2014-06-01

    Au doped ZnO (ZnO:Au) nanostructures were synthesized by ultrasound assisted wet chemical method. The concentration of dopant was varied and both structural and optical properties of ZnO:Au were investigated. The crystal structure and morphology of the samples were examined by X-ray diffraction (XRD) and transmission electron microscopy (TEM). These results showed the formation of nanorods of ZnO:Au having wurtzite structure and c-axis orientation. Gradual increase in crystallite size and bond length was also observed with the increase in gold concentration in ZnO intending the expansion of lattice after gold doping. The optical absorption measurements showed high ultraviolet (UV) absorbance property of ZnO:Au with sharp and intense absorption band in this region as compared to pristine ZnO. Photoluminescence (PL) measurements showed excitonic emission band of ZnO around 390 nm for both undoped and Au doped ZnO nanoparticles. Further, a strong emission around 467 nm was observed in the PL spectra of ZnO/ZnO:Au which was attributed to the transitions related to excess of oxygen vacancies. Interestingly, a new band was observed at 582 nm for doped ZnO samples which grew in intensity with doping concentration. This band was ascribed to the gold nanoparticle adsorbed on the surface of ZnO.

  10. Room-temperature ferromagnetism in Li-doped p -type luminescent ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Chawla, Santa; Jayanthi, K.; Kotnala, R. K.

    2009-03-01

    We have observed ferromagnetism in Li-doped ZnO nanorods with Curie temperature up to 554 K. Li forms shallow acceptor states in substitutional zinc sites giving rise to p -type conductivity. An explicit correlation emerges between increase in hole concentration with decrease in magnetization and Curie temperature in ZnO:Li. Occurrence of ferromagnetism at room temperature has been established with observed magnetic domain formation in ZnO:Li pellets in magnetic force microscopy and prominent ferromagnetic resonance signal in electron paramagnetic resonance spectrum. Magnetic ZnO:Li nanorods are luminescent, showing strong near UV emission. Substitutional Li atoms can induce local moments on neighboring oxygen atoms, which when considered in a correlated model for oxygen orbitals with random potentials introduced by dopant atom could explain the observed ferromagnetism and high Curie temperature in ZnO:Li nanorods.

  11. Development of Solution-Processed ZnO Nanorod Arrays Based Photodetectors and the Improvement of UV Photoresponse via AZO Seed Layers.

    PubMed

    Zhang, Yuzhu; Xu, Jianping; Shi, Shaobo; Gao, Yanyan; Wang, Chang; Zhang, Xiaosong; Yin, Shougen; Li, Lan

    2016-08-31

    Designing a rational structure and developing an efficient fabrication technique for bottom-up devices offer a promising opportunity for achieving high-performance devices. In this work, we studied how Al-doped ZnO (AZO) seed layer films influence the morphology and optical and electrical properties for ZnO aligned nanorod arrays (NRs) and then the performance of ZnO NRs based ultraviolet photodetectors (UV PDs) with Au/ZnO NRs Schottky junctions and p-CuSCN/n-ZnO NRs heterojunctions. The PD with AZO thin film with 0.5 at. % Al doping (named as AZO (0.5%)) exhibited more excellent photoresponse properties than that with pristine ZnO and AZO (1%) thin films. This phenomenon can be ascribed to the good light transmission of the AZO layer, increased density of the NRs, and improved crystallinity of ZnO NRs. The PDs based on CuSCN/ZnO NRs heterojunctions showed good rectification characteristics in the dark and self-powered UV photoresponse properties with excellent stability and reproducibility under low-intensity illumination conditions. A large responsivity located at 365 nm of 22.5 mA/W was achieved for the PD with AZO (0.5%) thin film without applied bias. The internal electric field originated from p-CuSCN/n-ZnO NRs heterojunctions can separate photogenerated carriers in ZnO NRs and drift toward the corresponding electrode. PMID:27500944

  12. A diffusion-controlled kinetic model for growth of Au-catalyzed ZnO nanorods: Theory and experiment

    NASA Astrophysics Data System (ADS)

    Hejazi, S. R.; Madaah Hosseini, H. R.

    2007-11-01

    A kinetic model for growth of ZnO nanorods via vapor-liquid-solid (VLS) mechanism based on the bulk diffusion of Zn atoms through the Au-Zn droplet is presented. The dependences of the growth rate on size are given quantitatively. A general expression for the growth rate of nanorods during VLS process is derived. The derived formula shows the dependences of growth rate on lateral size of nanorods, concentration and supersaturation of Zn atoms in the liquid droplet. Based on the presented kinetic model the smaller nanorods have faster growth rate. Au-catalyzed ZnO nanorods are grown by chemical vapor transport and condensation (CVTC) process experimentally. Theoretical and experimental rate/radius curves are compared to each other. Theoretical predictions are in good agreement with the experimental results.

  13. Electrochemical L-lactic acid sensor based on immobilized ZnO nanorods with lactate oxidase.

    PubMed

    Ibupoto, Zafar Hussain; Shah, Syed Muhammad Usman Ali; Khun, Kimleang; Willander, Magnus

    2012-01-01

    In this work, fabrication of gold coated glass substrate, growth of ZnO nanorods and potentiometric response of lactic acid are explained. The biosensor was developed by immobilizing the lactate oxidase on the ZnO nanorods in combination with glutaraldehyde as a cross linker for lactate oxidase enzyme. The potentiometric technique was applied for the measuring the output (EMF) response of l-lactic acid biosensor. We noticed that the present biosensor has wide linear detection range of concentration from 1 × 10(-4)-1 × 10(0) mM with acceptable sensitivity about 41.33 ± 1.58 mV/decade. In addition, the proposed biosensor showed fast response time less than 10 s, a good selectivity towards l-lactic acid in presence of common interfering substances such as ascorbic acid, urea, glucose, galactose, magnesium ions and calcium ions. The present biosensor based on immobilized ZnO nanorods with lactate oxidase sustained its stability for more than three weeks. PMID:22736960

  14. Surface-related emissions and ferromagnetism in undoped ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Shi, Shaobo; Dang, Zhi-Min; Xu, Jianping; Li, Lan; Hu, Guo-Hua

    2013-12-01

    Pristine ZnO nanorods were synthesized by hydrothermal method. The samples have a single phase nature with wurtzite structure and no other impurity phases were detected. The presence of OH groups on the as-grown samples surface was confirmed. After vacuum annealing and H2O2 solution treatment, the surface states and oxygen vacancies were modified in ZnO nanorods, resulting in suppressing the visible emission band and reducing the room temperature ferromagnetism (RTFM). Experimental results suggest that OH groups could be responsible for the strong broad yellow emission band and RTFM for as-grown ZnO nanorods. Green emission bands in vacuum annealed and H2O2-solution-treated samples could be attributed to singly ionized oxygen vacancy (V0+). A plausible explanation for the observed weak RTFM is presented in terms of V0+ for the annealed sample, whereas V0+ and residual OH groups for H2O2-solution-treated samples.

  15. Microwave-assisted hydrothermal synthesis and characterization of ZnO nanorods.

    PubMed

    Ocakoglu, K; Mansour, Sh A; Yildirimcan, S; Al-Ghamdi, Ahmed A; El-Tantawy, F; Yakuphanoglu, F

    2015-09-01

    For the purpose of this study, the nanorods of zinc oxide were synthesized by rapid microwave-assisted hydrothermal route. The microstructure and surface morphology of the sensitized nanorods were characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and transmission electron microscope (TEM). XRD results indicate that synthesized ZnO nanorods have wurtzite phase. The calculated value of the particle size using Debye Scherrer formula and Williamson Hall plot was found to be 20-28 nm and 35.3 nm, respectively. Low uniformity distribution of rod-like morphology (60-80 nm in diameter and average length about 250 nm) are seen in TEM micrographs. The optical parameters of the prepared ZnO nanorods have been calculated using Kubeleka-Munk approach for the UV-vis diffuse reflectance spectrum. It is found that the direct transition optical band gap of the studied sample is 3.17 eV. The direct current electrical conductivity (σ) was increased from 6.7×10(-8) to 3×10(-7) Ω(-1) cm(-1) with increasing the temperature (T) in the range (300-425 K). The obtained variation of σ with T refers that the conductivity mechanism is controlled by thermally activated process. PMID:25913135

  16. Microwave-assisted hydrothermal synthesis and characterization of ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Ocakoglu, K.; Mansour, Sh. A.; Yildirimcan, S.; Al-Ghamdi, Ahmed A.; El-Tantawy, F.; Yakuphanoglu, F.

    2015-09-01

    For the purpose of this study, the nanorods of zinc oxide were synthesized by rapid microwave-assisted hydrothermal route. The microstructure and surface morphology of the sensitized nanorods were characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and transmission electron microscope (TEM). XRD results indicate that synthesized ZnO nanorods have wurtzite phase. The calculated value of the particle size using Debye Scherrer formula and Williamson Hall plot was found to be 20-28 nm and 35.3 nm, respectively. Low uniformity distribution of rod-like morphology (60-80 nm in diameter and average length about 250 nm) are seen in TEM micrographs. The optical parameters of the prepared ZnO nanorods have been calculated using Kubeleka-Munk approach for the UV-vis diffuse reflectance spectrum. It is found that the direct transition optical band gap of the studied sample is 3.17 eV. The direct current electrical conductivity (σ) was increased from 6.7 ×10-8 to 3 ×10-7Ω-1cm-1 with increasing the temperature (T) in the range (300-425 K). The obtained variation of σ with T refers that the conductivity mechanism is controlled by thermally activated process.

  17. Selective calcium ion detection with functionalized ZnO nanorods-extended gate MOSFET.

    PubMed

    Asif, M H; Nur, O; Willander, M; Danielsson, B

    2009-07-15

    Zinc oxide nanorod-extended gate field effect transistor (MOSFET) is demonstrated for the detection of calcium (Ca(2+)) ions. ZnO nanorods were grown on the surface of a silver wire to produce an electrochemical nanosensor for selectively detecting Ca(2+). The electrochemical response from the interaction between the ZnO nanorods and Ca(2+) in an aqueous solution is coupled directly to the gate of a field effect transistor (MOSFET). The induced voltage change on the gate results in a measureable current response. In order to adapt the sensors for Ca(2+) ions measurements in biological fluids with sufficient selectivity and stability, a plastic membrane coating containing ionophores was applied on the nanorods. The sensor exhibited a linear response within the range of interest from 1 microM to 1 mM. This work demonstrates a simple technique for sensitive detection of Ca(2+) ions by efficient transfer of the chemical response directly to a standard electronic component producing a low impedance signal. PMID:19442511

  18. Facile synthesis of ZnO nanorod arrays and hierarchical nanostructures for photocatalysis and gas sensor applications.

    PubMed

    Ma, Shuaishuai; Li, Rong; Lv, Changpeng; Xu, Wei; Gou, Xinglong

    2011-08-30

    A facile one-step hydrothermal route was demonstrated to grow ZnO nanorod arrays and hierarchical nanostructures on arbitrary substrates without any catalysts and seeds coated before the reaction, which are prerequisite in the current two-step protocol. Meanwhile, ZnO nanoflowers composed of nanorods were obtained at the bottom of the autoclaves in the absence of substrates. An in situ spontaneous-seeds-assisted growth mechanism was tentatively proposed on the basis of the experimental data to explain the growth process of ZnO nanostructures. Moreover, the obtained ZnO nanorod arrays exhibited superior photocatalytic activity for decomposing methyl orange, and the nanoflowers showed better gas sensing performance towards some flammable gases and corrosive vapors with high sensitivity, rapid response-recovery characteristics, good selectivity and long-term stability. PMID:21684076

  19. Synthesis and properties of boron doped ZnO nanorods on silicon substrate by low-temperature hydrothermal reaction

    NASA Astrophysics Data System (ADS)

    Yu, Qi; Li, Liuan; Li, Hongdong; Gao, Shiyong; Sang, Dandan; Yuan, Jujun; Zhu, Pinwen

    2011-05-01

    Boron doped ZnO nanorods were fabricated by hydrothermal technique on silicon substrate covered with a ZnO seed layer. It is found that the concentration of boric acid in the reaction solution plays a key role in varying the morphology and properties of the products. The growth rate along the [0 0 0 1] orientation (average size in diameter) of the doped ZnO nanorods decreased (increased) with the increase of boric acid concentration. Based on the results of XRD, EDX and XPS, it is demonstrated that the boron dopants tend to occupy the octahedral interstice sites. The photoluminescence of the ZnO nanorods related to boron doping are investigated.

  20. ZnO nanoplates surfaced-decorated by WO3 nanorods for NH3 gas sensing application

    NASA Astrophysics Data System (ADS)

    Dien Nguyen, Dac; Do, Duc Tho; Hien Vu, Xuan; Vuong Dang, Duc; Chien Nguyen, Duc

    2016-03-01

    Zinc oxide (ZnO) nanoplates and tungsten trioxide (WO3) nanorods were synthesized by hydrothermal treatment from zinc nitrate/potassium hydroxide and sodium tungstate/hydrochloric acid, respectively. The structure, morphology and compositions of the as-prepared WO3/ZnO nano-composites were characterized by x-ray diffraction, field emission scanning electron microscopy and energy dispersive spectroscopy. The obtained ZnO nanoplates have regular shape, single-crystal wurtzite structure with the thickness of 40 nm and 200 versus 400 nm in lateral dimensions. The WO3 nanorods possess the average diameter of 20 nm and the length of approximately 120 nm which were distributed on the surfaces of ZnO nanoplates. The WO3/ZnO nano-composites were prepared by grinding WO3 nanorods powder with ZnO nanoplates powder in various weight ratios (1:2, 1:1 and 2:1). The NH3 gas sensing properties of WO3/ZnO nano-composites were examined through the electrical resistance measurement. The gas sensing performance of the WO3/ZnO composite with weight ratio of 1:1 was better compared with that of other samples. For this sample, the maximum response to 300 ppm NH3 was 24 at the operating temperature of 250 °C. In addition, the gas sensing mechanism of the WO3/ZnO composites was discussed.

  1. Enhancement in the structure quality of ZnO nanorods by diluted Co dopants: Analyses via optical second harmonic generation

    NASA Astrophysics Data System (ADS)

    Liu, Chung-Wei; Chang, Shoou-Jinn; Brahma, Sanjaya; Hsiao, Chih-Hung; Chang, Feng Ming; Wang, Peng Han; Lo, Kuang-Yao

    2015-02-01

    We report a systematic study about the effect of cobalt concentration in the growth solution over the crystallization, growth, and optical properties of hydrothermally synthesized Zn1-xCoxO [0 ≤ x ≤ 0.40, x is the weight (wt.) % of Co in the growth solution] nanorods. Dilute Co concentration of 1 wt. % in the growth solution enhances the bulk crystal quality of ZnO nanorods, and high wt. % leads to distortion in the ZnO lattice that depresses the crystallization, growth as well as the surface structure quality of ZnO. Although, Co concentration in the growth solution varies from 1 to 40 wt. %, the real doping concentration is limited to 0.28 at. % that is due to the low growth temperature of 80 °C. The enhancement in the crystal quality of ZnO nanorods at dilute Co concentration in the solution is due to the strain relaxation that is significantly higher for ZnO nanorods prepared without, and with high wt. % of Co in the growth solution. Second harmonic generation is used to investigate the net dipole distribution from these coatings, which provides detailed information about bulk and surface structure quality of ZnO nanorods at the same time. High quality ZnO nanorods are fabricated by a low-temperature (80 °C) hydrothermal synthesis method, and no post synthesis treatment is needed for further crystallization. Therefore, this method is advantageous for the growth of high quality ZnO coatings on plastic substrates that may lead toward its application in flexible electronics.

  2. Enhancement in the structure quality of ZnO nanorods by diluted Co dopants: Analyses via optical second harmonic generation

    SciTech Connect

    Liu, Chung-Wei; Hsiao, Chih-Hung; Brahma, Sanjaya; Chang, Feng Ming; Wang, Peng Han; Lo, Kuang-Yao

    2015-02-28

    We report a systematic study about the effect of cobalt concentration in the growth solution over the crystallization, growth, and optical properties of hydrothermally synthesized Zn{sub 1−x}Co{sub x}O [0 ≤ x ≤ 0.40, x is the weight (wt.) % of Co in the growth solution] nanorods. Dilute Co concentration of 1 wt. % in the growth solution enhances the bulk crystal quality of ZnO nanorods, and high wt. % leads to distortion in the ZnO lattice that depresses the crystallization, growth as well as the surface structure quality of ZnO. Although, Co concentration in the growth solution varies from 1 to 40 wt. %, the real doping concentration is limited to 0.28 at. % that is due to the low growth temperature of 80 °C. The enhancement in the crystal quality of ZnO nanorods at dilute Co concentration in the solution is due to the strain relaxation that is significantly higher for ZnO nanorods prepared without, and with high wt. % of Co in the growth solution. Second harmonic generation is used to investigate the net dipole distribution from these coatings, which provides detailed information about bulk and surface structure quality of ZnO nanorods at the same time. High quality ZnO nanorods are fabricated by a low-temperature (80 °C) hydrothermal synthesis method, and no post synthesis treatment is needed for further crystallization. Therefore, this method is advantageous for the growth of high quality ZnO coatings on plastic substrates that may lead toward its application in flexible electronics.

  3. Electrochemical Synthesis of ZnO Nanorods/Nanotubes/Nanopencils on Transparent Aluminium-Doped Zinc Oxide Thin Films for Photocatalytic Applications.

    PubMed

    Le, Thi Ngoc Tu; Pham, Tan Thi; Ngo, Quang Minh; Vu, Thi Hanh Thu

    2015-09-01

    We report an electrochemical synthesis of homogeneous and well-aligned ZnO nanorods (NRs) on transparent conducting aluminium-doped zinc oxide (AZO) thin films as electrodes. The selected ZnO NRs was then chemically corroded in HCl and KCl aqueous solutions to form nanopencils (NPs), and nanotubes (NTs), respectively. A DC magnetron sputtering was employed to fabricate AZO thin films at various thicknesses. The obtained AZO thin films have a c-direction orientation, transmittance above 80% in visible region, and sheet resistance approximately 40 Ω/sq. They are considered to be relevant as electrodes and seeding layers for electrochemical. The ZnO NRs are directly grown on the AZOs without a need of catalysts or additional seeding layers at temperature as low as 85 degrees C. Their shapes are strongly associated with the AZO thickness that provides a valuable way to control the diameter of ZnO NRs grown atop. With the addition of HCI and KCl aqueous solutions, ZnO NRs were modified their shape to NPs and NTs with the reaction time, respectively. All the ZnO NRs, NPs, and NTs are preferred to grow along c-direction that indicates a lattice matching between AZO thin films and ZnO nanostructrures. Photoluminescence spectra and XRD patterns show that they have good crystallinities. A great photocatalytic activity of ZnO nanostructures promises potential application in environmental treatment and protection. The ZnO NTs exhibits a higher photocatalysis than others possibly due to the oxygen vacancies on the surface and the polarizability of Zn2+ and O2-. PMID:26716213

  4. Growth of Well-Aligned InN Nanorods on Amorphous Glass Substrates

    NASA Astrophysics Data System (ADS)

    Li, Huijie; Zhao, Guijuan; Wei, Hongyuan; Wang, Lianshan; Chen, Zhen; Yang, Shaoyan

    2016-05-01

    The growth of well-aligned nanorods on amorphous substrates can pave the way to fabricate large-scale and low-cost devices. In this work, we successfully prepared vertically well-aligned c-axis InN nanorods on amorphous glass substrate by metal-organic chemical vapor deposition. The products formed directly on bare glass are randomly oriented without preferential growth direction. By inserting a GaN/Ti interlayer, the nanowire alignment can be greatly improved as indicated by scanning electron microscopy and X-ray diffraction.

  5. Growth of Well-Aligned InN Nanorods on Amorphous Glass Substrates.

    PubMed

    Li, Huijie; Zhao, Guijuan; Wei, Hongyuan; Wang, Lianshan; Chen, Zhen; Yang, Shaoyan

    2016-12-01

    The growth of well-aligned nanorods on amorphous substrates can pave the way to fabricate large-scale and low-cost devices. In this work, we successfully prepared vertically well-aligned c-axis InN nanorods on amorphous glass substrate by metal-organic chemical vapor deposition. The products formed directly on bare glass are randomly oriented without preferential growth direction. By inserting a GaN/Ti interlayer, the nanowire alignment can be greatly improved as indicated by scanning electron microscopy and X-ray diffraction. PMID:27229517

  6. Origin of enhanced photocatalytic activity and photoconduction in high aspect ratio ZnO nanorods.

    PubMed

    Leelavathi, A; Madras, Giridhar; Ravishankar, N

    2013-07-14

    Faceted ZnO nanorods with different aspect ratios were synthesized by a solvothermal method by tuning the reaction time. Increased reaction leads to the formation of high aspect ratio ZnO nanorods largely bound by the prism planes. The high aspect ratio rods showed significantly higher visible light photocatalytic activity when compared to the lower aspect ratio structures. It is proposed that the higher activity is due to better charge separation in the elongated 1D structure. In addition, the fraction of unsaturated Zn(2+) sites is higher on the {1010} facets, leading to better adsorption of oxygen-containing species. These species enhance the production of reactive radicals that are responsible for photodegradation. The photocurrent for these ZnO nanostructures under solar light was measured and a direct correlation between photocurrent and aspect ratio was observed. Since the underlying mechanisms for photodegradation and photocurrent generation are directly related to the efficiency of electron-hole creation and separation, this observation corroborates that the charge separation processes are indeed enhanced in the high aspect ratio structures. The efficiency of photoconduction (electron-hole pair separation) could be further improved by attaching Au nanoparticles on ZnO, which can act as a sink for the electrons. This heterostructure exhibits a high chemisorption of oxygen, which facilitates the production of highly reactive radicals contributing to the high photoreactivity. The suggested mechanisms are applicable to other n-type semiconductor nanostructures with important implications for applications relating to energy and the environment. PMID:23694926

  7. Spatially resolved photoresponse on individual ZnO nanorods: correlating morphology, defects and conductivity

    NASA Astrophysics Data System (ADS)

    Bandopadhyay, K.; Mitra, J.

    2016-06-01

    Electrically active native point defects have a significant impact on the optical and electrical properties of ZnO nanostructures. Control of defect distribution and a detailed understanding of their physical properties are central to designing ZnO in novel functional forms and architecture, which ultimately decides device performance. Defect control is primarily achieved by either engineering nanostructure morphology by tailoring growth techniques or doping. Here, we report conducting atomic force microscopy studies of spatially resolved photoresponse properties on ZnO nanorod surfaces. The photoresponse for super-band gap, ultraviolet excitations show a direct correlation between surface morphology and photoactivity localization. Additionally, the system exhibits significant photoresponse with sub-bandgap, green illumination; the signature energy associated with the deep level oxygen vacancy states. While the local current-voltage characteristics provide evidence of multiple transport processes and quantifies the photoresponse, the local time-resolved photoresponse data evidences large variations in response times (90 ms–50 s), across the surface of a nanorod. The spatially varied photoconductance and the range in temporal response display a complex interplay of morphology, defects and connectivity that brings about the true colour of these ZnO nanostructures.

  8. Spatially resolved photoresponse on individual ZnO nanorods: correlating morphology, defects and conductivity.

    PubMed

    Bandopadhyay, K; Mitra, J

    2016-01-01

    Electrically active native point defects have a significant impact on the optical and electrical properties of ZnO nanostructures. Control of defect distribution and a detailed understanding of their physical properties are central to designing ZnO in novel functional forms and architecture, which ultimately decides device performance. Defect control is primarily achieved by either engineering nanostructure morphology by tailoring growth techniques or doping. Here, we report conducting atomic force microscopy studies of spatially resolved photoresponse properties on ZnO nanorod surfaces. The photoresponse for super-band gap, ultraviolet excitations show a direct correlation between surface morphology and photoactivity localization. Additionally, the system exhibits significant photoresponse with sub-bandgap, green illumination; the signature energy associated with the deep level oxygen vacancy states. While the local current-voltage characteristics provide evidence of multiple transport processes and quantifies the photoresponse, the local time-resolved photoresponse data evidences large variations in response times (90 ms-50 s), across the surface of a nanorod. The spatially varied photoconductance and the range in temporal response display a complex interplay of morphology, defects and connectivity that brings about the true colour of these ZnO nanostructures. PMID:27334573

  9. Spatially resolved photoresponse on individual ZnO nanorods: correlating morphology, defects and conductivity

    PubMed Central

    Bandopadhyay, K.; Mitra, J.

    2016-01-01

    Electrically active native point defects have a significant impact on the optical and electrical properties of ZnO nanostructures. Control of defect distribution and a detailed understanding of their physical properties are central to designing ZnO in novel functional forms and architecture, which ultimately decides device performance. Defect control is primarily achieved by either engineering nanostructure morphology by tailoring growth techniques or doping. Here, we report conducting atomic force microscopy studies of spatially resolved photoresponse properties on ZnO nanorod surfaces. The photoresponse for super-band gap, ultraviolet excitations show a direct correlation between surface morphology and photoactivity localization. Additionally, the system exhibits significant photoresponse with sub-bandgap, green illumination; the signature energy associated with the deep level oxygen vacancy states. While the local current-voltage characteristics provide evidence of multiple transport processes and quantifies the photoresponse, the local time-resolved photoresponse data evidences large variations in response times (90 ms–50 s), across the surface of a nanorod. The spatially varied photoconductance and the range in temporal response display a complex interplay of morphology, defects and connectivity that brings about the true colour of these ZnO nanostructures. PMID:27334573

  10. The size controlled structural and optical properties of ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Chen, Yanwei; Yang, Guoliang; Qiao, Qian; Liu, Yichun

    2008-03-01

    In comparison with zero dimensional (0D) nanostructures, one-dimensional (1D) semiconducting nanostructures can facilitate more efficient carrier transport due to decreased grain boundaries, surface defects and disorders, and discontinuous interfaces. In order to utilize 1D ZnO nanostructures for optoelectronic nanodevices, it is essential to have detailed information about their size and other properties and to have the ability to tune these properties in the fabrication process. The application of the 1D nanostructures depend on this tenability. At present, it is still a challenge to fabricate well-controlled 1D ZnO nanostructures and to characterize their properties. We used convenient and flexible sol-gel and hydrothermal methods to synthesize 1D ZnO nanorods with diameters in the order of 10 to 20 nm. The crystallite size, morphology, the structural and optical properties could be well controlled by modulating the crystal nucleus quantity, the solution concentration and the reaction time. We obtained a strong ultraviolet exciton emission for the ZnO nanorods with a size about 10 nm, and also observed the size effect on the photoluminescence.

  11. Controlling the conduction band offset for highly efficient ZnO nanorods based perovskite solar cell

    NASA Astrophysics Data System (ADS)

    Dong, Juan; Shi, Jiangjian; Li, Dongmei; Luo, Yanhong; Meng, Qingbo

    2015-08-01

    The mechanism of charge recombination at the interface of n-type electron transport layer (n-ETL) and perovskite absorber on the carrier properties in the perovskite solar cell is theoretically studied. By solving the one dimensional diffusion equation with different boundary conditions, it reveals that the interface charge recombination in the perovskite solar cell can be suppressed by adjusting the conduction band offset (ΔEC) at ZnO ETL/perovskite absorber interface, thus leading to improvements in cell performance. Furthermore, Mg doped ZnO nanorods ETL has been designed to control the energy band levels. By optimizing the doping amount of Mg, the conduction band minimum of the Mg doped ZnO ETL has been raised up by 0.29 eV and a positive ΔEC of about 0.1 eV is obtained. The photovoltage of the cell is thus significantly increased due to the relatively low charge recombination.

  12. NMR Observation of Mobile Protons in Proton-Implanted ZnO Nanorods

    NASA Astrophysics Data System (ADS)

    Park, Jun Kue; Kwon, Hyeok-Jung; Lee, Cheol Eui

    2016-03-01

    The diffusion properties of H+ in ZnO nanorods are investigated before and after 20 MeV proton beam irradiation by using 1H nuclear magnetic resonance (NMR) spectroscopy. Herein, we unambiguously observe that the implanted protons occupy thermally unstable site of ZnO, giving rise to a narrow NMR line at 4.1 ppm. The activation barrier of the implanted protons was found to be 0.46 eV by means of the rotating-frame spin-lattice relaxation measurements, apparently being interstitial hydrogens. High-energy beam irradiation also leads to correlated jump diffusion of the surface hydroxyl group of multiple lines at ~1 ppm, implying the presence of structural disorder at the ZnO surface.

  13. NMR Observation of Mobile Protons in Proton-Implanted ZnO Nanorods

    PubMed Central

    Park, Jun Kue; Kwon, Hyeok-Jung; Lee, Cheol Eui

    2016-01-01

    The diffusion properties of H+ in ZnO nanorods are investigated before and after 20 MeV proton beam irradiation by using 1H nuclear magnetic resonance (NMR) spectroscopy. Herein, we unambiguously observe that the implanted protons occupy thermally unstable site of ZnO, giving rise to a narrow NMR line at 4.1 ppm. The activation barrier of the implanted protons was found to be 0.46 eV by means of the rotating-frame spin-lattice relaxation measurements, apparently being interstitial hydrogens. High-energy beam irradiation also leads to correlated jump diffusion of the surface hydroxyl group of multiple lines at ~1 ppm, implying the presence of structural disorder at the ZnO surface. PMID:26988733

  14. Fabrication of ZnO nanorod/p-GaN high-brightness UV LED by microwave-assisted chemical bath deposition with Zn(OH)2-PVA nanocomposites as seed layer

    NASA Astrophysics Data System (ADS)

    Hassan, J. J.; Mahdi, M. A.; Yusof, Y.; Abu-Hassan, H.; Hassan, Z.; Al-Attar, H. A.; Monkman, A. P.

    2013-03-01

    Chemical solution deposition is a low-temperature and possibly the lowest-cost method of growing ZnO nanorods on a GaN substrate. However, most reported methods leave an interface layer between the grown ZnO nanorods and substrate, which can interfere with light emission and extraction. Here we report the growth of high-quality, vertically aligned ZnO nanorods directly on a p-type GaN substrate, with no interface layer, by microwave-assisted chemical bath deposition using a polyvinyl alcohol (PVA)-Zn(OH)2 nanocomposites as the seed layer. X-ray diffraction and field-emission scanning electron microscopy confirmed the high quality of the nanorods in addition to the narrow and high-intensity UV peak of the photoluminescence spectrum. Three different filling insulator materials, poly methyl methacrylate (PMMA), SiO2, and PVA, were used to fabricate n-ZnO nanorod/p-GaN thin film LED structures. The electroluminescence (EL) properties for these three devices showed different emission peaks, which mainly originated from the recombination of free carriers at the two sides of the heterojunction. All devices showed excellent LED performance under forward and reverse bias; the PMMA device showed EL peaks in the UV-blue region, and the SiO2 device displayed EL peaks in the UV and green regions, respectively.

  15. Tailoring the surface of ZnO nanorods into corrugated nanorods via a selective chemical etch method

    NASA Astrophysics Data System (ADS)

    Duan, Xiangyang; Chen, Guangde; Li, Chu; Yin, Yuan; Jin, Wentao; Guo, Lu’an; Ye, Honggang; Zhu, Youzhang; Wu, Yelong

    2016-07-01

    Using the chemical vapour deposition method, we successfully converted smooth ZnO nanorods (NRs) into corrugated NRs by simply increasing the reaction time. The surface morphology and crystallographic structure of the corrugated NRs were investigated. The corrugated NRs were decorated by alternant (11\\bar{2}1) and (11\\bar{2}\\bar{1}) planes at the exposed side surfaces while the conventional \\{10\\bar{1}0\\} planes disappeared. No twinning boundaries were found in the periodically corrugated structures, indicating that they were type II corrugated NRs. Further investigation told us that they were selectively etched. We introduced a hydrothermal method to synthesize the smooth ZnO NRs and then etched them in a tube furnace at 950 °C with a flow of carbon monoxide. By separating the growth stage and the selective etching stage, we explicitly demonstrated a successfully selective etching effect on ZnO NRs with a carbon monoxide reducing atmosphere for the first time. An etching mechanism based on the selective reaction between carbon monoxide and the different exposed surfaces was proposed. Our results will improve the understanding of the growth mechanism on coarse or corrugated NRs and provide a new strategy for the application of surface controlled nanostructured materials.

  16. Tailoring the surface of ZnO nanorods into corrugated nanorods via a selective chemical etch method.

    PubMed

    Duan, Xiangyang; Chen, Guangde; Li, Chu; Yin, Yuan; Jin, Wentao; Guo, Lu'an; Ye, Honggang; Zhu, Youzhang; Wu, Yelong

    2016-07-22

    Using the chemical vapour deposition method, we successfully converted smooth ZnO nanorods (NRs) into corrugated NRs by simply increasing the reaction time. The surface morphology and crystallographic structure of the corrugated NRs were investigated. The corrugated NRs were decorated by alternant [Formula: see text] and [Formula: see text] planes at the exposed side surfaces while the conventional [Formula: see text] planes disappeared. No twinning boundaries were found in the periodically corrugated structures, indicating that they were type II corrugated NRs. Further investigation told us that they were selectively etched. We introduced a hydrothermal method to synthesize the smooth ZnO NRs and then etched them in a tube furnace at 950 °C with a flow of carbon monoxide. By separating the growth stage and the selective etching stage, we explicitly demonstrated a successfully selective etching effect on ZnO NRs with a carbon monoxide reducing atmosphere for the first time. An etching mechanism based on the selective reaction between carbon monoxide and the different exposed surfaces was proposed. Our results will improve the understanding of the growth mechanism on coarse or corrugated NRs and provide a new strategy for the application of surface controlled nanostructured materials. PMID:27276661

  17. Facile synthesis of highly branched jacks-like ZnO nanorods and their applications in dye-sensitized solar cells

    SciTech Connect

    Sudhagar, P.; Kumar, R. Saravana; Jung, June Hyuk; Cho, Woohyung; Sathyamoorthy, R.; Won, Jongok; Kang, Yong Soo

    2011-09-15

    Graphical abstract: -- Abstract: Highly branched, jacks-like ZnO nanorods architecture were explored as a photoanode in dye-sensitized solar cells, and their photovoltaic performance was compared with that of branch-free ZnO nanorods photoanodes. The highly branched network and large pores of the jacks-like ZnO nanorods electrodes enhances the charge transport, and electrolyte penetration. Thus, the jacks-like ZnO nanorods DSSCs render a higher conversion efficiency of {eta} = 1.82% (V{sub oc} = 0.59 V, J{sub sc} = 5.52 mA cm{sup -2}) than that of the branch-free ZnO nanorods electrodes ({eta} = 1.08%, V{sub oc} = 0.49 V, J{sub sc} = 4.02 mA cm{sup -2}). The incident photon-to-current conversion efficiency measurements reveal that the jacks-like ZnO nanorods DSSCs exhibit higher internal quantum efficiency ({approx}59.1%) than do the branch-free ZnO nanorods DSSC ({approx}52.5%). The charge transfer resistances at the ZnO/dye/electrolyte interfaces investigated using electrochemical impedance spectroscopy showed that the jacks-like ZnO nanorods DSSC had high charge transfer resistance and a slightly longer electron lifetime, thus improving the solar-cell performance.

  18. Influence of Y-doped induced defects on the optical and magnetic properties of ZnO nanorod arrays prepared by low-temperature hydrothermal process

    PubMed Central

    2012-01-01

    One-dimensional pure zinc oxide (ZnO) and Y-doped ZnO nanorod arrays have been successfully fabricated on the silicon substrate for comparison by a simple hydrothermal process at the low temperature of 90°C. The Y-doped nanorods exhibit the same c-axis-oriented wurtzite hexagonal structure as pure ZnO nanorods. Based on the results of photoluminescence, an enhancement of defect-induced green-yellow visible emission is observed for the Y-doped ZnO nanorods. The decrease of E2(H) mode intensity and increase of E1(LO) mode intensity examined by the Raman spectrum also indicate the increase of defects for the Y-doped ZnO nanorods. As compared to pure ZnO nanorods, Y-doped ZnO nanorods show a remarked increase of saturation magnetization. The combination of visible photoluminescence and ferromagnetism measurement results indicates the increase of oxygen defects due to the Y doping which plays a crucial role in the optical and magnetic performances of the ZnO nanorods. PMID:22768847

  19. Photoresponsive surface molecularly imprinted polymer on ZnO nanorods for uric acid detection in physiological fluids.

    PubMed

    Tang, Qian; Li, Zai-Yong; Wei, Yu-Bo; Yang, Xia; Liu, Lan-Tao; Gong, Cheng-Bin; Ma, Xue-Bing; Lam, Michael Hon-Wah; Chow, Cheuk-Fai

    2016-09-01

    A photoresponsive surface molecularly imprinted polymer for uric acid in physiological fluids was fabricated through a facile and effective method using bio-safe and biocompatible ZnO nanorods as a support. The strategy was carried out by introducing double bonds on the surface of the ZnO nanorods with 3-methacryloxypropyltrimethoxysilane. The surface molecularly imprinted polymer on ZnO nanorods was then prepared by surface polymerization using uric acid as template, water-soluble 5-[(4-(methacryloyloxy)phenyl)diazenyl]isophthalic acid as functional monomer, and triethanolamine trimethacryl ester as cross-linker. The surface molecularly imprinted polymer on ZnO nanorods showed good photoresponsive properties, high recognition ability, and fast binding kinetics toward uric acid, with a dissociation constant of 3.22×10(-5)M in aqueous NaH2PO4 buffer at pH=7.0 and a maximal adsorption capacity of 1.45μmolg(-1). Upon alternate irradiation at 365 and 440nm, the surface molecularly imprinted polymer on ZnO nanorods can quantitatively uptake and release uric acid. PMID:27207036

  20. Synthesis and enhanced NO2 gas sensing properties of ZnO nanorods/TiO2 nanoparticles heterojunction composites.

    PubMed

    Zou, C W; Wang, J; Xie, W

    2016-09-15

    ZnO nanorods/TiO2 nanoparticles composites were synthesized and the effects of TiO2 concentrations on the NO2 sensing properties were studied in detail. The as-prepared composites were characterized by XRD, SEM, TEM, PL, I-V and gas sensing measurements. The gas sensing results demonstrated that all the sensors based on ZnO/TiO2 nanocomposites exhibited much higher response than that of sensors based on pure ZnO nanorods. At the optimum operating temperature of 180°C, the response values of the sensors based on ZnO/TiO2 nanocomposites decorated with TiO2 concentrations of 0, 3, 5, 8 and 10wt% were 50, 140, 310, 350 and 258, respectively. The PL and I-V results indicated that the increased charge transfer between the ZnO nanorods mediated by TiO2 nanoparticles enhanced the conductivity of the ZnO/TiO2 nanocomposites. The gas sensing mechanism was also carefully analyzed. The attachment of TiO2 nanoparticles onto ZnO nanorods induced more active sites for the adsorption of oxygen molecules (O(2)) and O(2) which can be more easily adsorbed on the surface of ZnO nanorods. Furthermore, the conduction channel of ZnO/TiO2 was much narrower as a result of the formation of heterojunction which may further contribute to the enhanced NO2 sensing properties. PMID:27280536

  1. Strong metal-support interactions between gold nanoparticles and ZnO nanorods in CO oxidation.

    PubMed

    Liu, Xiaoyan; Liu, Ming-Han; Luo, Yi-Chia; Mou, Chung-Yuan; Lin, Shawn D; Cheng, Hongkui; Chen, Jin-Ming; Lee, Jyh-Fu; Lin, Tien-Sung

    2012-06-20

    The catalytic performances of supported gold nanoparticles depend critically on the nature of support. Here, we report the first evidence of strong metal-support interactions (SMSI) between gold nanoparticles and ZnO nanorods based on results of structural and spectroscopic characterization. The catalyst shows encapsulation of gold nanoparticles by ZnO and the electron transfer between gold and the support. Detailed characterizations of the interaction between Au nanoparticles and ZnO were done with transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), electron paramagnetic resonance (EPR), and FTIR study of adsorbed CO. The significance of the SMSI effect is further investigated by probing the efficiency of CO oxidation over the Au/ZnO-nanorod. In contrast to the classical reductive SMSI in the TiO(2) supported group VIII metals which appears after high temperature reduction in H(2) with electron transfer from the support to metals, the oxidative SMSI in Au/ZnO-nanorod system gives oxygen-induced burial and electron transfer from gold to support. In CO oxidation, we found that the oxidative SMSI state is associated with positively charged gold nanoparticles with strong effect on its catalytic activity before and after encapsulation. The oxidative SMSI can be reversed by hydrogen treatment to induce AuZn alloy formation, de-encapsulation, and electron transfer from support to Au. Our discovery of the SMSI effects in Au/ZnO nanorods gives new understandings of the interaction between gold and support and provides new way to control the interaction between gold and the support as well as catalytic activity. PMID:22612449

  2. Growth mechanism of ZnO nanorod/Fe3O4 nanoparticle composites and their photocatalytic properties

    NASA Astrophysics Data System (ADS)

    Wang, Wenda; Yu, Leiming; Yang, Hanjia; Hong, Kunquan; Qiao, Zhenfang; Wang, Hai

    2015-11-01

    ZnO nanorods/Fe3O4 nanocomposites as the recyclable photocatalyst were synthesized by a co-precipitation method, with microwave assistant by dropping alkaline solution with Fe3O4 nanoparticles into the aqueous of zinc salt. These Fe3O4 nanoparticles were the nucleated centers for the ZnO nanorods growth so that these nanorods ended with aggregated Fe3O4 nanoparticles. The growth processes and mechanism are explained as those insoluble zinc hydroxides prefer to nucleate on the surface of Fe3O4 nanoparticles (heterogeneous nucleation) rather than nucleated as isolated ZnO nanostructures (homogeneous nucleation). These nanocomposites have strong photocatalytic ability to reduce RhB and moderate magnetization, which make them being good recyclable photocatalysts.

  3. Chemical growth of ZnO nanorod arrays on textured nanoparticle nanoribbons and its second-harmonic generation performance

    NASA Astrophysics Data System (ADS)

    Gui, Zhou; Wang, Xian; Liu, Jian; Yan, Shanshan; Ding, Yanyan; Wang, Zhengzhou; Hu, Yuan

    2006-07-01

    On the basis of the highly oriented ZnO nanoparticle nanoribbons as the growth seed layer (GSL) and solution growth technique, we have synthesized vertical ZnO nanorod arrays with high density over a large area and multi-teeth brush nanostructure, respectively, according to the density degree of the arrangement of nanoparticle nanoribbons GSL on the glass substrate. This controllable and convenient technique opens the possibility of creating nanostructured film for industrial fabrication and may represent a facile way to get similar structures of other compounds by using highly oriented GSL to promote the vertical arrays growth. The growth mechanism of the formation of the ordered nanorod arrays is also discussed. The second-order nonlinear optical coefficient d31 of the vertical ZnO nanorod arrays measured by the Maker fringes technique is 11.3 times as large as that of d36 KH 2PO 4 (KDP).

  4. Co-functionalized organic/inorganic hybrid ZnO nanorods as electron transporting layers for inverted organic solar cells

    NASA Astrophysics Data System (ADS)

    Ambade, Swapnil B.; Ambade, Rohan B.; Eom, Seung Hun; Baek, Myung-Jin; Bagde, Sushil S.; Mane, Rajaram S.; Lee, Soo-Hyoung

    2016-02-01

    In an unprecedented attempt, we present an interesting approach of coupling solution processed ZnO planar nanorods (NRs) by an organic small molecule (SM) with a strong electron withdrawing cyano moiety and the carboxylic group as binding sites by a facile co-functionalization approach. Direct functionalization by SMs (SM-ZnO NRs) leads to higher aggregation owing to the weaker solubility of SMs in solutions of ZnO NRs dispersed in chlorobenzene (CB). A prior addition of organic 2-(2-methoxyethoxy)acetic acid (MEA) over ZnO NRs not only inhibits aggregation of SMs over ZnO NRs, but also provides enough sites for the SM to strongly couple with the ZnO NRs to yield transparent SM-MEA-ZnO NRs hybrids that exhibited excellent capability as electron transporting layers (ETLs) in inverted organic solar cells (iOSCs) of P3HT:PC60BM bulk-heterojunction (BHJ) photoactive layers. A strongly coupled SM-MEA-ZnO NR hybrid reduces the series resistance by enhancing the interfacial area and tunes the energy level alignment at the interface between the (indium-doped tin oxide, ITO) cathode and BHJ photoactive layers. A significant enhancement in power conversion efficiency (PCE) was achieved for iOSCs comprising ETLs of SM-MEA-ZnO NRs (3.64%) advancing from 0.9% for pristine ZnO NRs, while the iOSCs of aggregated SM-ZnO NRs ETL exhibited a much lower PCE of 2.6%, thus demonstrating the potential of the co-functionalization approach. The superiority of the co-functionalized SM-MEA-ZnO NRs ETL is also evident from the highest PCE of 7.38% obtained for the iOSCs comprising BHJ of PTB7-Th:PC60BM compared with extremely poor 0.05% for non-functionalized ZnO NRs.In an unprecedented attempt, we present an interesting approach of coupling solution processed ZnO planar nanorods (NRs) by an organic small molecule (SM) with a strong electron withdrawing cyano moiety and the carboxylic group as binding sites by a facile co-functionalization approach. Direct functionalization by SMs (SM

  5. Rapid synthesis of white-light emissive ZnO nanorods using microwave assisted method

    NASA Astrophysics Data System (ADS)

    Karimipour, M.; Mohammad-Sadeghipour, A.; Molaei, M.; Khanzadeh, M.

    2015-12-01

    In this paper, firstly we have synthesized ZnO nanowires using zinc acetate, ethanol and ammonium hydroxide by a thermo-chemical method and then ZnO nanorods (NRs) have been prepared by microwave irradiation (MI) of an initial solution containing ZnO nanowires. X-ray diffraction (XRD) analysis showed the rare zinc-blende phase which grows on the surface of NRs and its crystallite size increases with the increase of microwave power. The average length and width of rods were observed several hundreds of nanometer and 80nm, respectively, from scanning electron microscope (SEM) analysis. Ultraviolet-visible (UV-vis) absorption spectroscopy indicates that a band tail forms due to MI, which has roughly 2eV energy gap. Photoluminescence (PL) spectroscopy indicated a blue emission and a white emission for ZnO nanowires and NRs, respectively. MI quenches the UV emission from ZnO NRs and enhances the surface defects’ emission. The resultant visible PL of the samples increases with the increase of microwave power that shows the growth of zinc-blende phase which has crucial effect on the defect density of NRs.

  6. Photoresponse from single upright-standing ZnO nanorods explored by photoconductive AFM

    PubMed Central

    Beinik, Igor; Kratzer, Markus; Wachauer, Astrid; Wang, Lin; Piryatinski, Yuri P; Brauer, Gerhard; Chen, Xin Yi; Hsu, Yuk Fan; Djurišić, Aleksandra B

    2013-01-01

    Summary Background: ZnO nanostructures are promising candidates for the development of novel electronic devices due to their unique electrical and optical properties. Here, photoconductive atomic force microscopy (PC-AFM) has been applied to investigate transient photoconductivity and photocurrent spectra of upright-standing ZnO nanorods (NRs). With a view to evaluate the electronic properties of the NRs and to get information on recombination kinetics, we have also performed time-resolved photoluminescence measurements macroscopically. Results: Persistent photoconductivity from single ZnO NRs was observed for about 1800 s and was studied with the help of photocurrent spectroscopy, which was recorded locally. The photocurrent spectra recorded from single ZnO NRs revealed that the minimum photon energy sufficient for photocurrent excitation is 3.1 eV. This value is at least 100 meV lower than the band-gap energy determined from the photoluminescence experiments. Conclusion: The obtained results suggest that the photoresponse in ZnO NRs under ambient conditions originates preferentially from photoexcitation of charge carriers localized at defect states and dominates over the oxygen photodesorption mechanism. Our findings are in agreement with previous theoretical predictions based on density functional theory calculations as well as with earlier experiments carried out at variable oxygen pressure. PMID:23616940

  7. Large-scale patterned ZnO nanorod arrays for efficient photoelectrochemical water splitting

    NASA Astrophysics Data System (ADS)

    Hu, Yaping; Yan, Xiaoqin; Gu, Yousong; Chen, Xiang; Bai, Zhiming; Kang, Zhuo; Long, Fei; Zhang, Yue

    2015-06-01

    Nowadays, the fabrication of photoanodes with high light-harvesting capability and charge transfer efficiency is a key challenge for photoelectrochemical (PEC) water splitting. In this paper, large-scale patterned ZnO nanorod arrays (NRAs) were designed and fabricated via two-beam laser interference lithography and hydrothermal synthesis, which were further applied as PEC photoanodes for the first time. By adopting the ZnO NRA photoanodes with square pattern, the PEC cells achieved a maximum efficiency of 0.18%, which was improved 135% compared to the control group with no patterned ZnO NRAs. The large-scale highly ordered ZnO NRAs have enhanced light-harvesting ability due to the light-scattering effect. In addition, the enlarged surface area of the patterned ZnO NRAs accelerated the charge transfer at the photoanode/electrolyte interface. This research demonstrates an effective mean to realize the efficient solar water splitting, and the results suggest that large-scale highly ordered nanostructures are promising candidates in the field of energy harvesting.

  8. Compacted nanoscale sensors by merging ZnO nanorods with interdigitated electrodes

    NASA Astrophysics Data System (ADS)

    Wang, Qin; Rihtnesberg, David B.; Bergström, Andreas; Almqvist, Susanne; Zhang, Andy Z. Z.; Kaplan, Wlodek; Andersson, Jan Y.; Sugunan, Abhilash; Yang, Xuran; Toprak, Muhammet S.

    2011-06-01

    ZnO nanorods (NRs) sensors utilizing hybrid or monolithic integration of the NRs on nanoscale or microscale interdigitated electrodes (IDEs) were fabricated and characterized. The IDEs with their finger electrode width ranging from 50 nm to 3 μm were formed on SiO2/Si substrates by nanoimprint lithography or conventional photolithography and metallization techniques, whereas the ZnO NRs were grown by chemical synthesis method. The average diameter of the ZnO NRs is about 100 nm, and their length can be varied from 2 to 5 μm by controlling growth time. When sensing targets, such as molecules or nanoparticles, bind onto the ZnO NRs, the conductance between IDEs will change. As probing test, II-VI quantum dots (QDs) were attached on the ZnO NRs, and clear responses were obtained by measuring and comparing current-voltage (I-V) characteristic of the sensor before and after binding the QDs.

  9. Controllable synthesis of branched hierarchical ZnO nanorod arrays for highly sensitive hydrazine detection

    NASA Astrophysics Data System (ADS)

    Hu, Jie; Zhao, Zhenting; Sun, Yongjiao; Wang, Ying; Li, Pengwei; Zhang, Wendong; Lian, Kun

    2016-02-01

    In this paper, three different kinds of ZnO nanostructures were successfully synthesized on Au/Glass (Au/G) substrate by electrochemical deposition method. The morphology and crystalline structures of the obtained samples were characterized using SEM, XRD and HRTEM. Electrochemical responses of the as-prepared ZnO based sensors to hydrazine in 0.1 M phosphate buffer solution (PBS, pH 7.4) were analyzed by cyclic voltammetry and single-potential amperometry. The results confirmed that the electrochemical performances of ZnO sensors are strongly dependent on the specific surface area. Especially, the branched hierarchical ZnO nanorod arrays shows the highest sensitivity of 5.35 μA μM-1 cm-2, a short response time of 3 s, a low detection limit of 0.08 μM with a linear hydrazine concentration response range from 0.8 μM to 101 μM, and it also exhibits excellent anti-interference, stability and reproducibility abilities, which provide great potential method of ZnO branched hierarchical structures in the development of high-performance electrochemical sensor.

  10. Growth of Multipod ZnO Architectures Made by Accumulation of Hexagonal Nanorods for Dye Sensitized Solar Cell (DSSC) Application.

    PubMed

    Umar, Ahmad

    2015-09-01

    Well-crystalline multipod ZnO architectures made by accumulation of hexagonal nanorods were synthesized, characterized and used as efficient anode material for the fabrication of dye-sensitized solar cell (DSSC). The multipod ZnO architectures were synthesized by simple and facile hydrothermal process and characterized by several techniques to examine the structural, morphological, optical and photovoltaic properties. The morphological characterizations revealed that the synthesized multipod ZnO architectures were made of several hexagonal shaped ZnO nanorods which are originated from a single centre. The structural and compositional properties revealed that the nanorods are pure ZnO and possessing well crystallinity and wurtzite hexagonal phase. The assynthesized multipods ZnO architectures were utilized as potential anode materials for the fabrication of dye-sensitized solar cell (DSSC). The dye sensitized solar cells fabricated with multipods ZnO architectures photoanode attained a reasonable solar to electricity energy conversion efficiency of -1.9% with a photocurrent density i.e., short circuit current (J(sc)) of 4.59 mA/cm2. PMID:26716247

  11. Synthesis and Characterization of Mg-doped ZnO Nanorods for Biomedical Applications

    NASA Astrophysics Data System (ADS)

    Gemar, H.; Das, N. C.; Wanekaya, A.; Delong, R.; Ghosh, K.

    2013-03-01

    Nanomaterials research has become a major attraction in the field of advanced materials research in the area of Physics, Chemistry, and Materials Science. Bio-compatible and chemically stable metal nanoparticles have biomedical applications that includes drug delivery, cell and DNA separation, gene cloning, magnetic resonance imaging (MRI). This research is aimed at the fabrication and characterization of Mg-doped ZnO nanorods. Hydrothermal synthesis of undoped ZnO and Mg-doped ZnO nanorods is carried out using aqueous solutions of Zn(NO3)2 .6H2O, MgSO4, and using NH4OH as hydrolytic catalyst. Nanomaterials of different sizes and shapes were synthesized by varying the process parameters such as molarity (0.15M, 0.3M, 0.5M) and pH (8-11) of the precursors, growth temperature (130°C), and annealing time during the hydrothermal Process. Structural, morphological, and optical properties are studied using various techniques such as XRD, SEM, UV-vis and PL spectroscopy. Detailed structural, and optical properties will be discussed in this presentation. This work is partially supported by National Cancer Institute (1 R15 CA139390-01).

  12. Structure, morphologies and dye removal efficiency of ZnO nanorods grown on polycrystalline Zn substrate

    NASA Astrophysics Data System (ADS)

    Yin, Tiantian; Chen, Nan; Zhang, Yingying; Cai, Xiaoyan; Wang, Yude

    2014-10-01

    Rod-like ZnO with the different morphologies were grown on polycrystalline Zn substrate by a simple hydrothermal process in a NaOH or NH4OH solution at the hydrothermal temperature range from 80 to 150 °C for different reaction time. Variations preparation in the different alkali solution concentration, hydrothermal temperature, and reaction times were explored to shed light on the morphology of the rod-like nanostructures. The thorough structural characterization including X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), electron diffraction, and X-ray photoelectron spectrum (XPS) were employed to examine the morphology and the microstructure of the final products. It was found that alkali solution concentration, hydrothermal temperature and time have important influence on the morphology of the rod-like nanostructures. The dye removal efficiency of ZnO nanorods was explored by the decoloration of azo dye Congo red (CR). In order to obtain the optimum removal conditions of Congo red, the performance of removing CR with various initial concentrations by ZnO nanorods on Zn substrates with different morphologies was tested under various ambient conditions (visible light illumination and darkness). All prepared samples showed an excellent dye removal efficiency for organic pollutants CR from wastewater, making them promising candidates for the wastewater treatment.

  13. Enhanced piezoelectric output voltage and Ohmic behavior in Cr-doped ZnO nanorods

    SciTech Connect

    Sinha, Nidhi; Ray, Geeta; Godara, Sanjay; Gupta, Manoj K.; Kumar, Binay

    2014-11-15

    Highlights: • Low cost highly crystalline Cr-doped ZnO nanorods were synthesized. • Enhancement in dielectric, piezoelectric and ferroelectric properties were observed. • A high output voltage was obtained in AFM. • Cr-doping resulted in enhanced conductivity and better Ohmic behavior in ZnO/Ag contact. - Abstract: Highly crystalline Cr-doped ZnO nanorods (NRs) were synthesized by solution technique. The size distribution was analyzed by high resolution tunneling electron microscope (HRTEM) and particle size analyzer. In atomic force microscope (AFM) studies, peak to peak 8 mV output voltage was obtained on the application of constant normal force of 25 nN. It showed high dielectric constant (980) with phase transition at 69 °C. Polarization vs. electric field (P–E) loops with remnant polarization (6.18 μC/cm{sup 2}) and coercive field (0.96 kV/cm) were obtained. In I–V studies, Cr-doping was found to reduce the rectifying behavior in the Ag/ZnO Schottky contact which is useful for field effect transistor (FET) and solar cell applications. With these excellent properties, Cr-doped ZnO NRs can be used in nanopiezoelectronics, charge storage and ferroelectric applications.

  14. Beam Divergence and Thermal Transient Characteristics of InGaN/GaN Light Emitting Diodes with Rear Side Grown ZnO Nanorods

    NASA Astrophysics Data System (ADS)

    Jin, Joo; Deul Ryu, Beo; Han, Min; Saravana Kumar, R.; Uthirakumar, Periyayya; Kim, Hyun Kyu; Jong Han, Yang; Lee, Kyu Han; Hong, Chang-Hee

    2012-10-01

    We report the enhanced light output power of InGaN/GaN light-emitting diodes (LEDs) with ZnO nanorods grown on the polished rear side of the sapphire substrate. ZnO seeds were spin coated on the polished bottom side of the sapphire substrate and a simple solution technique was employed to grow ZnO nanorods. Results reveal that the rear side grown ZnO nanorods enhance the light output power of the GaN LEDs significantly due to the light wave guiding and reflectivity of ZnO nanorods. The light output power from the GaN LED with rear side grown ZnO nanorods was 15% higher than that of a conventional LED. Thermal conductivity characteristics showed that GaN LEDs with ZnO nanorods possess low thermal resistance (25.1 °C/W) compared to the conventional LEDs (40.5 °C/W) because of high thermal conductivity of ZnO nanorods.

  15. Electrical characteristics and stability of gold and palladium Schottky contacts on ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Klason, P.; Nur, O.; Willander, M.

    2008-11-01

    The electrical characteristics and stability of Pd and Au Schottky contacts on ZnO nanorods grown on glass substrate have been investigated. The nanorods were grown using the aqueous chemical growth method. The nanorods were characterized with scanning electron microscopy (SEM), x-ray diffraction (XRD) and photoluminescence (PL). Prior to the metal contact deposition, an insulating PMMA layer was deposited between the nanorods. The best-produced Schottky contact was an as-deposited Pd/ZnO contact with an ideality factor of 1.74 ± 0.43 and a barrier height of 0.67 ± 0.09 eV. The relatively high ideality factor indicates that the current transport cannot be described by pure thermionic transport. The presence of surface states due to the high evaporation pressure is probably the reason for the high ideality factor. Post metal deposition annealing at 150 °C for 30 min in air lowered the barrier height and decreased the Au/ZnO ideality factor but increased it for Pd/ZnO. The current follows ohmic behavior when the applied forward bias, Vforward, is lower than 0.1 V, whereas for Vforward between 0.1 and 0.45 V the current follows I~exp(cV), and at higher forward biases the current-voltage characteristics follow the relation I~V2, indicating that the space-charge current-limiting mechanism is dominating the current transport.

  16. Probing interaction of gram-positive and gram-negative bacterial cells with ZnO nanorods.

    PubMed

    Jain, Aanchal; Bhargava, Richa; Poddar, Pankaj

    2013-04-01

    In the present work, the physiological effects of the ZnO nanorods on the Gram positive (Staphylococcus aureus and Bacillus subtilis) and Gram-negative (Escherichia coli and Aerobacter aerogenes) bacterial cells have been studied. The analysis of bacterial growth curves for various concentrations of ZnO nanorods indicates that Gram positive and Gram negative bacterial cells show inhibition at concentrations of ~64 and ~256 μg/mL respectively. The marked difference in susceptibility towards nanorods was also validated by spread plate and disk diffusion methods. In addition, the scanning electron micrographs show a clear damage to the cells via changed morphology of the cells from rod to coccoid etc. The confocal optical microscopy images of these cells also demonstrate the reduction in live cell count in the presence of ZnO nanorods. These, results clearly indicate that the antibacterial activity of ZnO nanorods is higher towards Gram positive bacterium than Gram negative bacterium which indicates that the structure of the cell wall might play a major role in the interaction with nanostructured materials and shows high sensitivity to the particle concentration. PMID:23827568

  17. Optical parameters of boron-doped ZnO nanorods grown by low-temperature hydrothermal reaction.

    PubMed

    Kim, Soaram; Park, Hyunggil; Nam, Giwoong; Yoon, Hyunsik; Kim, Younggyu; Kim, Byunggu; Ji, Iksoo; Kim, Jong Su; Kim, Jin Soo; Kim, Do Yeob; Kim, Sung-O; Leem, Jae-Young

    2014-11-01

    Sol-gel spin-coating was used to deposit ZnO seed layers onto quartz substrates, and ZnO nanorods doped with various concentrations of B (i.e., BZO nanorods) ranging from 0 to 2.0 at% were hydrothermally grown on the ZnO seed layers. The effects of B doping on the absorption coefficient, optical band gap, Urbach energy, refractive index, extinction coefficient, single-oscillator energy, dispersion energy, average oscillator strength, average oscillator wavelength, dielectric constant, and optical conductivity of the hydrothermally grown BZO nanorods were investigated. The optical band gaps were 3.255, 3.243, 3.254, 3.258, and 3.228 eV for the nanorods grwon at 0, 0.5, 1.0, 1.5 and 2.0 at% B, respectively. B doping increased the Urbach energy from 40.7 to 65.1 meV for the nanorods grown at 0 and 2.0 at% B, respectively, and significantly affected the dispersion energy, the single-oscillator energy, the average oscillator wavelength, the average oscillator strength, the refractive index, and the optical conductivity of the hydrothermally grown BZO nanorods. PMID:25958555

  18. Improved photocatalytic activity of single crystal ZnO nanorod derived from highly effective P/N heterojunction

    SciTech Connect

    Yan, Xiaoyan; Gong, Changwei; Wang, Jian; Liang, Liping; Zhao, Li; Zhang, Mingang; Chai, Yuesheng

    2013-10-15

    Graphical abstract: Schematic showing on photocatalytic degradation 2,4-DCP of ZnO NRs/BDD heterojunction. - Highlights: • Single-crystal ZnO nanorods based P/N heterojunction has been synthesized. • Vertical growth ZnO NRs on BDD can effectively photocatalytic decompose 2,4-DCP. • The rate constant of photocatalysis can be enhanced due to P/N heterojunction. - Abstract: Highly effective single-crystal ZnO nanorods based P/N heterojunction has been synthesized by a controllable crystal seed-induced hydrothermal vertical growth method, which facilitates the separation of the photogenerated electrons and holes due to its endogenous space charge region and suitable band structure. Therefore, photocatalytic activity for degradation of the toxic pollutants is markedly enhanced.

  19. Tunable Surface Wettability of ZnO Nanoparticle Arrays for Controlling the Alignment of Liquid Crystals.

    PubMed

    Chung, Yueh-Feng; Chen, Mu-Zhe; Yang, Sheng-Hsiung; Jeng, Shie-Chang

    2015-05-13

    The control of the liquid crystal (LC) alignment is very important for both academic research and practical applications. LC molecules aligned on the ZnO nanoparticle arrays (ZnO NPAs) are demonstrated and the pretilt angles of LCs can be controlled by using ZnO NPAs with different surface wettability. The wettability of ZnO NPAs fabricated by the solution-based hydrothermal method can be controlled by changing the annealing temperature of the as-prepared ZnO NPAs. The measurements of the energy-dispersive spectra and photoluminescence have shown that the chemical properties of ZnO NPAs have been changed with the annealing temperature. Our results show that the pretilt angle of LCs can be tuned continuously from ∼0 to ∼90° as the contact angle of water on ZnO NPAs changes from 33 to 108°. PMID:25895105

  20. Oxygen vacancies induced DX center and persistent photoconductivity properties of high quality ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Xie, Yong; Madel, Manfred; Feneberg, Martin; Neuschl, Benjamin; Jie, Wanqi; Hao, Yue; Ma, Xiaohua; Thonke, Klaus

    2016-04-01

    Ultraviolet sensors based on homoepitaxially grown ZnO nanorods were fabricated using clean room technology. We study the spectral dependence and frequency dependence of the photoresponse of these rods at different temperatures and ambient conditions. Whereas the response for above-bandgap light is fast, we find a slow response to light below band gap and clear signatures of persistent photoconductivity. These findings are explained by switching oxygen vacancies by light from nonconductive to conductive state, whereas the oxygen vacancies undergo a large lattice relaxation. The threshold photon energy for this process is found to be 2.6 eV at room temperature.

  1. UV detector from ZnO nanorods with electrodes resembling a wheatstone bridge pattern

    NASA Astrophysics Data System (ADS)

    Vasudevan, Arun; Jung, Soyoun; Ji, Taeksoo

    2011-10-01

    Detectors currently used for UV detection are Si based and photomultiplier tubes, but these are bulky and less sensitive. ZnO based detector is an alternative to silicon and photomultiplier tubes due to its high sensitivity to UV light and can be fabricated cheaply and compactly. Here we attempt to increase the sensitivity of ZnO based detector by using electrode design that resembles a Wheatstone bridge and the detector has metal-semiconductor-metal structure. This new improved design enhances the collection of carriers and also miniaturization of the detector. The nanorods for the detector were grown by solution growth technique and the response of the detector on the length of the interdigitated fingers and spacing between the interdigitated fingers were also studied.49518

  2. Control of charge dynamics by blending ZnO nanoparticles with poly(3-hexylthiophene) for efficient hybrid ZnO nanorods/polymer solar cells

    NASA Astrophysics Data System (ADS)

    Ruankham, Pipat; Choopun, Supab; Sagawa, Takashi

    2015-10-01

    Photovoltaic performances of hybrid ZnO nanorods/polymer solar cells have been improved by controlling their charge dynamics through addition of ZnO nanoparticles into poly(3-hexylthiophene) (P3HT) photoactive layer. The inter-rod space of ZnO nanorod substrates is completely filled with the solution-processed ZnO nanoparticles/P3HT blends, forming homogeneous junction among the components. The optimum PCE of 1.020 % has been achieved from the device with 13 vol % ZnO nanoparticles loaded. The enhancement in external quantum efficiency has been also observed, indicating the improved excitons separation at the ZnO/P3HT interface. The information on charge dynamics in the system has been investigated by electrochemical impedance spectroscopy. It has been found that the additional space-charge layer formed at the ZnO nanoparticles-contact electrode interface is a reason behind the improvement of open-circuit voltage. Moreover, the formation of ZnO nanoparticles domain extending across the active layer and the percolation path for charge carriers promotes charge transport by reducing transit time of the carriers, extending charge carrier lifetime and enhancing the charge transfer at the ZnO/P3HT interface. Interestingly, it has been found that charge transport in the devices does not limit the device performances, even for the 400-nm-thick active layer.

  3. Synthesis and characterization of Cr-doped ZnO nanorod-array photocatalysts with improved activity

    SciTech Connect

    Chang, Chi-Jung Yang, Tsung-Lin; Weng, Yu-Ching

    2014-06-01

    Immobilized photocatalysts with high catalytic activity under UV light were prepared by growing Cr-doped ZnO nanorods on glass substrates by a hydrothermal method. The effects of Cr dopant on the surface texture, crystallinity, surface chemistry, and photoinduced charge separation and their relation with the photocatalytic degradation of Cr-doped ZnO were investigated by scanning electron microscopy, diffuse reflectance spectra, photoelectrochemical scanning electrochemical microscopy, and X-ray photoemission spectroscopy. Adding the appropriate amount of Cr dopant is a powerful way to enhance the separation of charge carriers in ZnO photocatalyst. The photocatalytic activity was improved due to the increase in surface oxygen vacancies, the separation of charge carriers, modification of the band gap, and the large surface area of the doped ZnO nanorod photocatalyst. - Graphical abstract: Photoinduced charge separation and its relation with the photocatalytic degradation activity of Cr-doped ZnO were investigated by photoelectrochemical scanning electrochemical microscopy. - Highlights: • Cr dopant enhances separation of charge carries in ZnO nanorod photocatalyst. • Photoinduced charge carries separation monitored by PEC-SECM. • The higher the photocurrent is, the higher the photocatalytic activity is. • Degradation of DB86 dye solutions under visible light finished within 50 min. • Higher activity due to more oxygen vacancy, tuned band gap and more surface area.

  4. Selective photochemical synthesis of Ag nanoparticles on position-controlled ZnO nanorods for the enhancement of yellow-green light emission

    NASA Astrophysics Data System (ADS)

    Park, Hyeong-Ho; Zhang, Xin; Lee, Keun Woo; Sohn, Ahrum; Kim, Dong-Wook; Kim, Joondong; Song, Jin-Won; Choi, Young Su; Lee, Hee Kwan; Jung, Sang Hyun; Lee, In-Geun; Cho, Young-Dae; Shin, Hyun-Beom; Sung, Ho Kun; Park, Kyung Ho; Kang, Ho Kwan; Park, Won-Kyu; Park, Hyung-Ho

    2015-12-01

    A novel technique for the selective photochemical synthesis of silver (Ag) nanoparticles (NPs) on ZnO nanorod arrays is established by combining ultraviolet-assisted nanoimprint lithography (UV-NIL) for the definition of growth sites, hydrothermal reaction for the position-controlled growth of ZnO nanorods, and photochemical reduction for the decoration of Ag NPs on the ZnO nanorods. During photochemical reduction, the size distribution and loading of Ag NPs on ZnO nanorods can be tuned by varying the UV-irradiation time. The photochemical reduction is hypothesized to facilitate the adsorbed citrate ions on the surface of ZnO, allowing Ag ions to preferentially form Ag NPs on ZnO nanorods. The ratio of visible emission to ultraviolet (UV) emission for the Ag NP-decorated ZnO nanorod arrays, synthesized for 30 min, is 20.5 times that for the ZnO nanorod arrays without Ag NPs. The enhancement of the visible emission is believed to associate with the surface plasmon (SP) effect of Ag NPs. The Ag NP-decorated ZnO nanorod arrays show significant SP-induced enhancement of yellow-green light emission, which could be useful in optoelectronic applications. The technique developed here requires low processing temperatures (120 °C and lower) and no high-vacuum deposition tools, suitable for applications such as flexible electronics.A novel technique for the selective photochemical synthesis of silver (Ag) nanoparticles (NPs) on ZnO nanorod arrays is established by combining ultraviolet-assisted nanoimprint lithography (UV-NIL) for the definition of growth sites, hydrothermal reaction for the position-controlled growth of ZnO nanorods, and photochemical reduction for the decoration of Ag NPs on the ZnO nanorods. During photochemical reduction, the size distribution and loading of Ag NPs on ZnO nanorods can be tuned by varying the UV-irradiation time. The photochemical reduction is hypothesized to facilitate the adsorbed citrate ions on the surface of ZnO, allowing Ag ions to

  5. Output power enhancement from ZnO nanorods piezoelectric nanogenerators by Si microhole arrays

    NASA Astrophysics Data System (ADS)

    Baek, Seong-Ho; Roqibul Hasan, Md; Park, Il-Kyu

    2016-02-01

    We demonstrate the enhancement of output power from a ZnO nanorod (NR)-based piezoelectric nanogenerator by using Si microhole (Si-μH) arrays. The depth-controlled Si-μH arrays were fabricated by using the deep reactive ion etching method. The ZnO NRs were grown along the Si-μH surface, in holes deeper than 20 μm. The polymer layer, polydimethylsiloxane, which acts a stress diffuser and electrical insulator, was successfully penetrated into the deep Si-μH arrays. Optical investigations show that the crystalline quality of the ZnO NRs on the Si-μH arrays was not degraded, even though they were grown on the deeper Si-μH arrays. As the depth of the Si-μH arrays increase from 0 to 20 μm, the output voltage was enhanced by around 8.1 times while the current did not increase. Finally, an output power enhancement of ten times was obtained. This enhancement of the output power was consistent with the increase in the surface area, and was mainly attributed to the accumulation of the potentials generated by the series-connected ZnO NR-based nanogenerators, whose number increases as the depth of the Si-μH increases.

  6. Core-shell TiO2@ZnO nanorods for efficient ultraviolet photodetection.

    PubMed

    Panigrahi, Shrabani; Basak, Durga

    2011-05-01

    Core-shell TiO(2)@ZnO nanorods (NRs) have been fabricated by a simple two step method: growth of ZnO NRs' array by an aqueous chemical technique and then coating of the NRs with a solution of titanium isopropoxide [Ti(OC(3)H(7))(4)] followed by a heating step to form the shell. The core-shell nanocomposites are composed of single-crystalline ZnO NRs, coated with a thin TiO(2) shell layer obtained by varying the number of coatings (one, three and five times). The ultraviolet (UV) emission intensity of the nanocomposite is largely quenched due to an efficient electron-hole separation reducing the band-to-band recombinations. The UV photoconductivity of the core-shell structure with three times TiO(2) coating has been largely enhanced due to photoelectron transfer between the core and the shell. The UV photosensitivity of the nanocomposite becomes four times larger while the photocurrent decay during steady UV illumination has been decreased almost by 7 times compared to the as-grown ZnO NRs indicating high efficiency of these core-shell structures as UV sensors. PMID:21483939

  7. Core-shell TiO2@ZnO nanorods for efficient ultraviolet photodetection

    NASA Astrophysics Data System (ADS)

    Panigrahi, Shrabani; Basak, Durga

    2011-05-01

    Core-shell TiO2@ZnO nanorods (NRs) have been fabricated by a simple two step method: growth of ZnO NRs' array by an aqueous chemical technique and then coating of the NRs with a solution of titanium isopropoxide [Ti(OC3H7)4] followed by a heating step to form the shell. The core-shell nanocomposites are composed of single-crystalline ZnO NRs, coated with a thin TiO2 shell layer obtained by varying the number of coatings (one, three and five times). The ultraviolet (UV) emission intensity of the nanocomposite is largely quenched due to an efficient electron-hole separation reducing the band-to-band recombinations. The UV photoconductivity of the core-shell structure with three times TiO2 coating has been largely enhanced due to photoelectron transfer between the core and the shell. The UV photosensitivity of the nanocomposite becomes four times larger while the photocurrent decay during steady UV illumination has been decreased almost by 7 times compared to the as-grown ZnO NRs indicating high efficiency of these core-shell structures as UV sensors.

  8. Metal-Semiconductor-Metal Near-Ultraviolet (~380 nm) Photodetectors by Selective Area Growth of ZnO Nanorods and SiO2 Passivation.

    PubMed

    Lee, Soo Hyun; Kim, Sang Hun; Yu, Jae Su

    2016-12-01

    Metal-semiconductor-metal near-ultraviolet (NUV) photodetectors (PDs) based on zinc oxide (ZnO) nanorods (NRs), operating at λ ~ 380 nm, were fabricated using conventional photolithography and hydrothermal synthesis processes. The vertically aligned ZnO NRs were selectively grown in the channel area of PDs. The performance of ZnO NR-based NUV PDs was optimized by varying the solution concentration and active channel width (W ch). For the fabricated samples, their electrical and photoresponse properties were investigated under the dark state and the illumination at wavelength of ~380 nm, respectively. For the device (W ch = 30 μm) with ZnO NRs at 25 mM, the highest photocurrent of 0.63 mA was obtained with the on/off ratio of 1720 at the bias of 5 V. The silicon dioxide passivation was also carried out to improve the photoresponse properties of PDs. The passivated devices exhibited faster rise and reset times rather than those of the unpassivated devices. PMID:27422775

  9. Rapid fabrication of ZnO nanorod arrays with controlled spacing by micelle-templated solvothermal growth

    NASA Astrophysics Data System (ADS)

    Pelligra, Candice I.; Toth, Kristof; Hu, Hanqiong; Osuji, Chinedum O.

    2015-12-01

    We present a facile method for the synthesis of nanorod arrays over large areas with fine control over the average rod-rod spacing. Block copolymer micelles are used to template solvothermal synthesis of ZnO nanorods by preferentially enabling reactant diffusion through the micelle cores to an underlying seed layer. The distance between nanorod centers is defined by the micelle number density which is in turn controlled by the molecular weight of the block copolymer, and the block copolymer concentration in a templating film. We demonstrate the ability to control the resulting nanorod number density from ~100 μm-2 down to ~10 μm-2 with high fidelity. Correspondingly, the distance between nanorod surfaces was varied from ~60 nm to 230 nm. The method developed here provides a viable approach for rapidly fabricating large-area nanostructured electrodes comprised of nanorod arrays with controlled geometries. The ability to tailor nanorod spacing over a broad range suggests applications in photovoltaics and sensors based on optical resonances can be readily addressed.We present a facile method for the synthesis of nanorod arrays over large areas with fine control over the average rod-rod spacing. Block copolymer micelles are used to template solvothermal synthesis of ZnO nanorods by preferentially enabling reactant diffusion through the micelle cores to an underlying seed layer. The distance between nanorod centers is defined by the micelle number density which is in turn controlled by the molecular weight of the block copolymer, and the block copolymer concentration in a templating film. We demonstrate the ability to control the resulting nanorod number density from ~100 μm-2 down to ~10 μm-2 with high fidelity. Correspondingly, the distance between nanorod surfaces was varied from ~60 nm to 230 nm. The method developed here provides a viable approach for rapidly fabricating large-area nanostructured electrodes comprised of nanorod arrays with controlled geometries

  10. Impact of hydrogen concentrations on the impedance spectroscopic behavior of Pd-sensitized ZnO nanorods

    PubMed Central

    2013-01-01

    ZnO nanorods were synthesized using a low-cost sol-gel spin coating technique. The synthesized nanorods were consisted of hexagonal phase having c-axis orientation. SEM images reflected perpendicular ZnO nanorods forming bridging network in some areas. The impact of different hydrogen concentrations on the Pd-sensitized ZnO nanorods was investigated using an impedance spectroscopy (IS). The grain boundary resistance (Rgb) significantly contributed to the sensing properties of hydrogen gas. The boundary resistance was decreased from 11.95 to 3.765 kΩ when the hydrogen concentration was increased from 40 to 360 ppm. IS gain curve showed a gain of 6.5 for 360 ppm of hydrogen at room temperature. Nyquist plot showed reduction in real part of impedance at low frequencies on exposure to different concentrations of hydrogen. Circuit equivalency was investigated by placing capacitors and resistors to identify the conduction mechanism according to complex impedance Nyquist plot. Variations in nanorod resistance and capacitance in response to the introduction of various concentrations of hydrogen gas were obtained from the alternating current impedance spectra. PMID:23399029

  11. Impact of hydrogen concentrations on the impedance spectroscopic behavior of Pd-sensitized ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Kashif, Muhammad; Ali, Md Eaqub; Ali, Syed M. Usman; Hashim, Uda; Hamid, Sharifah Bee Abd

    2013-02-01

    ZnO nanorods were synthesized using a low-cost sol-gel spin coating technique. The synthesized nanorods were consisted of hexagonal phase having c-axis orientation. SEM images reflected perpendicular ZnO nanorods forming bridging network in some areas. The impact of different hydrogen concentrations on the Pd-sensitized ZnO nanorods was investigated using an impedance spectroscopy (IS). The grain boundary resistance ( R gb) significantly contributed to the sensing properties of hydrogen gas. The boundary resistance was decreased from 11.95 to 3.765 kΩ when the hydrogen concentration was increased from 40 to 360 ppm. IS gain curve showed a gain of 6.5 for 360 ppm of hydrogen at room temperature. Nyquist plot showed reduction in real part of impedance at low frequencies on exposure to different concentrations of hydrogen. Circuit equivalency was investigated by placing capacitors and resistors to identify the conduction mechanism according to complex impedance Nyquist plot. Variations in nanorod resistance and capacitance in response to the introduction of various concentrations of hydrogen gas were obtained from the alternating current impedance spectra.

  12. Defect mediated optical emission of randomly oriented ZnO nanorods and unusual rectifying behavior of Schottky nanojunctions

    NASA Astrophysics Data System (ADS)

    Bayan, Sayan; Mohanta, Dambarudhar

    2011-09-01

    We report on the interrelation of optical emission of randomly oriented ZnO nanorod system with the carrier transport properties of Ag/ZnO nanorod-based rectifying junctions. The ZnO nanorods, exhibiting a hexagonal wurtzite phase, were fabricated by a cost-effective rapid thermal annealing process and at different annealing temperatures. The photoluminescence spectra of the as grown samples have revealed various Zn and O related native defects (e.g., vacancies, interstitials etc.) located at ˜400, 428, 491, and 535 nm. As evident from the I-V characteristic curves, though all the Ag/ZnO nanojunctions show Schottky behavior, the nanorods grown at a temperature of 550 °C and 650 °C are characterized by very large ideality factors of respective values 35.4 and 33.2, apart from displaying unusually high reverse currents. Whereas, the samples grown at 450 °C and 750 °C show usual rectifying nature having relatively lower ideality factors (18.4 and 12.2), along with low leakage-current under reverse biasing. The enhancement or suppression of the reverse currents can be attributed to the eventual lowering or raising of the Schottky barrier heights which result from the variation in the native defect states of various ZnO nanorod systems. Correlating optical events and electrical response through native defects would find scope in assessing figure of merit and sensitivity while making rectifying nanojunctions and single electron devices.

  13. Enhanced performance with bismuth ferrite perovskite in ZnO nanorod solid state solar cells

    NASA Astrophysics Data System (ADS)

    Loh, Leonard; Briscoe, Joe; Dunn, Steve

    2014-05-01

    This paper reports for the first time the use of perovskite bismuth ferrite (BiFeO3 or BFO) on ZnO-based solid state solar cells using only chemical solution methods for materials synthesis. As ZnO has poor chemical stability in acidic and corrosive environments, a buffer method using aminosilane ((3-aminopropyltriethoxysilane or H2N(CH2)3Si(OC2H5)3)) coating was used to provide a protective coating on the ZnO nanorods. The aminosilane layer was removed after BFO coating. The solid state solar cells, sensitized by N719, used CuSCN as the hole conductor and were tested under 100 mW cm-2, AM 1.5G simulated sunlight. The photovoltaic performance showed current density improvement from 0.64 mA cm-2 to 1.4 mA cm-2 and efficiencies from 0.1% to 0.38% when comparing between ZnO and ZnO/BFO solar cells. The observed ca. 400% improved performance is shown to result from BFO's role as an electron blocking layer.This paper reports for the first time the use of perovskite bismuth ferrite (BiFeO3 or BFO) on ZnO-based solid state solar cells using only chemical solution methods for materials synthesis. As ZnO has poor chemical stability in acidic and corrosive environments, a buffer method using aminosilane ((3-aminopropyltriethoxysilane or H2N(CH2)3Si(OC2H5)3)) coating was used to provide a protective coating on the ZnO nanorods. The aminosilane layer was removed after BFO coating. The solid state solar cells, sensitized by N719, used CuSCN as the hole conductor and were tested under 100 mW cm-2, AM 1.5G simulated sunlight. The photovoltaic performance showed current density improvement from 0.64 mA cm-2 to 1.4 mA cm-2 and efficiencies from 0.1% to 0.38% when comparing between ZnO and ZnO/BFO solar cells. The observed ca. 400% improved performance is shown to result from BFO's role as an electron blocking layer. Electronic supplementary information (ESI) available. See DOI: 10.1039/c4nr00911h

  14. Two-step wetting transition on ZnO nanorod arrays

    NASA Astrophysics Data System (ADS)

    Luo, H.; Ma, J.; Wang, P.; Bai, J.; Jing, G.

    2015-08-01

    Transition between superhydrophilicity and superhydrophobicity is primarily important in the modification of the wettability of the material surface. The significant transition between the superhydrophilicity and the superhydrophobicity is realized from the surface made up of zinc oxide (ZnO) nanorod arrays on a silicon substrate with different annealing temperatures by the post-annealing process. Surprisingly, a critical temperature (300 °C) existed for ZnO nanorod arrays to achieve the transition from the increase in contact angle to its reduction. As the annealing temperature increases, the initial hydrophilic surface is gradually converted to the superhydrophobic one, whereas the surface property reverses back to the hydrophilic one as the critical annealing temperature is surpassed. Oxygen vacancies and carbon adsorptions are examined to be responsible for this extraordinary wettability variation. We establish a simple theoretical model to describe the novel mechanism of the transition between the superhydrophilicity and the superhydrophobicity. The facile method to achieve the transition reported here will supply the great facile applications to control the wetting properties of materials, without employing the destroyable chemical coating or external stimulation by electrowetting and ultra-violet (UV) illumination.

  15. Biopolymer-assisted self-assembly of ZnO nanoarchitectures from nanorods

    NASA Astrophysics Data System (ADS)

    Lupan, O.; Chow, L.; Chai, G.; Schulte, A.; Park, S.; Lopatiuk-Tirpak, O.; Chernyak, L.; Heinrich, H.

    2008-04-01

    We have investigated three-dimensional (3-D) architectures-microspheres and radial structures-based on biopolymer-assisted self-assembly from one-dimensional ZnO nanorods. The developed method is simple, rapid and cost-effective and can be used for self-assembly of different complex superstructures. A possible model of 3-D architectures self-assembled with biopolymer assistance is presented using minimum energy considerations. Scanning electron microscopy, X-ray diffraction, energy dispersive X-ray spectroscopy, transmission electron microscopy, micro-Raman spectroscopy and cathode luminescence investigations show that the novel 3-D architectures are built from high-purity ZnO nanorods with a wurtzite structure. The resulting radial structures show an intense ultraviolet (UV) cathode luminescence emission suggesting applications as UV light emitting diodes or lasers. Their structural characteristics endow them with a broad area of applications and offer a possibility to be used as fundamental low-dimensional building units. These building units open opportunities for the self-assembly of multifunctional nanostructured systems with applications in bioscience and nanomedicine, electronics and photonics.

  16. A highly efficient fluorescent sensor of explosive peroxide vapor via ZnO nanorod array catalyzed deboronation of pyrenyl borate.

    PubMed

    He, Chao; Zhu, Defeng; He, Qingguo; Shi, Liqi; Fu, Yanyan; Wen, Dan; Cao, Huimin; Cheng, Jiangong

    2012-06-11

    A new strategy capable of detecting explosive peroxide vapor via deboronation reaction induced fluorescence quenching has been developed. Using ordered assembly arrays of ZnO nanorods as catalyzing substrates, the deboronation reaction was 42 times faster than that on quartz substrates, which resulted in a very fast response and high sensitivity. PMID:22552712

  17. Tragacanth gum biopolymer as reducing and stabilizing agent in biosonosynthesis of urchin-like ZnO nanorod arrays: A low cytotoxic photocatalyst with antibacterial and antifungal properties.

    PubMed

    Ghayempour, Soraya; Montazer, Majid; Mahmoudi Rad, Mahnaz

    2016-01-20

    Tragacanth, a natural gum, has been used for centuries as emulsifier, thickener, stabilizer and binder in various fields such as food, medical and cosmetic industries. In this study, Tragacanth gum was used as a clean and natural reducing and stabilizing agent for preparation of urchin-like ZnO nanorod arrays at low-temperature using ultrasonic irradiation. The morphology and structure of urchin-like ZnO nanorod arrays was investigated by XRD, FESEM images, EDX, UV-vis and FT-IR spectroscopy. The hexagonal zinc oxide nanorods were synthesized with the average diameter of 55-80 nm and length of 240 nm. The peak appeared in 447 cm(-1) in FTIR spectra and the peak around 362.3 nm in UV-vis spectra of ZnO nanorods confirmed the successful synthesis of ZnO nanorods. The urchin-like ZnO nanorod arrays indicated a good photocatalytic activity through degradation of methylene blue with 92.2% efficiency and rate constant of 0.0027 min(-1) at 120 min. Finally, the synthesized urchin-like ZnO nanorod arrays indicated 100% antibacterial activity against S. aureus and E. coli and 93% antifungal activity against C. albicans with a low cytotoxicity. PMID:26572351

  18. Microstructural, chemical and textural characterization of ZnO nanorods synthesized by aerosol assisted chemical vapor deposition

    SciTech Connect

    Sáenz-Trevizo, A.; Amézaga-Madrid, P.; Fuentes-Cobas, L.; Pizá-Ruiz, P.; Antúnez-Flores, W.; Ornelas-Gutiérrez, C.; Pérez-García, S.A.; Miki-Yoshida, M.

    2014-12-15

    ZnO nanorods were synthesized by aerosol assisted chemical vapor deposition onto TiO{sub 2} covered borosilicate glass substrates. Deposition parameters were optimized and kept constant. Solely the effect of different nozzle velocities on the growth of ZnO nanorods was evaluated in order to develop a dense and uniform structure. The crystalline structure was characterized by conventional X-ray diffraction in grazing incidence and Bragg–Brentano configurations. In addition, two-dimensional grazing incidence synchrotron radiation diffraction was employed to determine the preferred growth direction of the nanorods. Morphology and growth characteristics analyzed by electron microscopy were correlated with diffraction outcomes. Chemical composition was established by X-ray photoelectron spectroscopy. X-ray diffraction results and X-ray photoelectron spectroscopy showed the presence of wurtzite ZnO and anatase TiO{sub 2} phases. Morphological changes noticed when the deposition velocity was lowered to the minimum, indicated the formation of relatively vertically oriented nanorods evenly distributed onto the TiO{sub 2} buffer film. By coupling two-dimensional X-ray diffraction and computational modeling with ANAELU it was proved that a successful texture determination was achieved and confirmed by scanning electron microscopy analysis. Texture analysis led to the conclusion of a preferred growth direction in [001] having a distribution width Ω = 20° ± 2°. - Highlights: • Uniform and pure single-crystal ZnO nanorods were obtained by AACVD technique. • Longitudinal and transversal axis parallel to the [001] and [110] directions, respectively. • Texture was determined by 2D synchrotron diffraction and electron microscopy analysis. • Nanorods have its [001] direction distributed close to the normal of the substrate. • Angular spread about the preferred orientation is 20° ± 2°.

  19. High optical switching speed and flexible electrochromic display based on WO3 nanoparticles with ZnO nanorod arrays' supported electrode

    NASA Astrophysics Data System (ADS)

    Wang, Mingjun; Fang, Guojia; Yuan, Longyan; Huang, Huihui; Sun, Zhenhua; Liu, Nishuang; Xia, Shanhong; Zhao, Xingzhong

    2009-05-01

    The electrochromic (EC) property of WO3 nanoparticles grown on vertically self-aligned ZnO nanorods (ZNRs) is reported. An electrochromic character display based on WO3 nanoparticle-modified ZnO nanorod arrays on a flexible substrate has been fabricated and demonstrated. The ZNRs were first synthesized on ZnO-seed-coated In2O3:Sn (ITO) glass (1 cm2 cell) and polyethylene terephthalate (PET) (4 cm2 cell) substrates by a low temperature hydrothermal method, and then amorphous WO3 nanoparticles were grown directly on the surface of the ZNRs by the pulsed laser deposition (PLD) method. The ZNR-based EC device shows high transparence, good electrochromic stability and fast switching speed (4.2 and 4 s for coloration and bleaching, respectively, for a 1 cm2 cell). The good performance of the ZNR electrode-based EC display can be attributed to the large surface area, high crystallinity and good electron transport properties of the ZNR arrays. Its high contrast, fast switching, good memory and flexible characteristics indicate it is a promising candidate for flexible electrochromic displays or electronic paper.

  20. Growth of vertically aligned one-dimensional ZnO nanowire arrays on sol-gel derived ZnO thin films

    NASA Astrophysics Data System (ADS)

    Kitazawa, Nobuaki; Aono, Masami; Watanabe, Yoshihisa

    2014-11-01

    Vertically aligned one-dimensional ZnO nanowire arrays have been synthesized by a hydrothermal method on sol-gel derived ZnO films. Sol-gel derived ZnO films and corresponding ZnO nanowire arrays have been characterized by X-ray diffraction and field-emission scanning electron microscopy. The effect of sol-gel derived ZnO film surface on the morphology of ZnO nanowire arrays has been investigated. The authors suggest from our investigation that sol-gel derived ZnO films affect the growth of one-dimensional ZnO nanostructures. Not only crystalline ZnO films but also amorphous ones can act as a scaffold for ZnO nucleus. Tilted ZnO micro-rods are grown on ZnO gel films, whereas vertically aligned ZnO nanowire arrays are grown on nanometer-sized ZnO grains. The average diameter of ZnO nanowire arrays are correlated strongly with the grain size of sol-gel derived ZnO films.

  1. Electrical characteristics and stability of gold and palladium Schottky contacts on ZnO nanorods.

    PubMed

    Klason, P; Nur, O; Willander, M

    2008-11-26

    The electrical characteristics and stability of Pd and Au Schottky contacts on ZnO nanorods grown on glass substrate have been investigated. The nanorods were grown using the aqueous chemical growth method. The nanorods were characterized with scanning electron microscopy (SEM), x-ray diffraction (XRD) and photoluminescence (PL). Prior to the metal contact deposition, an insulating PMMA layer was deposited between the nanorods. The best-produced Schottky contact was an as-deposited Pd/ZnO contact with an ideality factor of 1.74 ± 0.43 and a barrier height of 0.67 ± 0.09 eV. The relatively high ideality factor indicates that the current transport cannot be described by pure thermionic transport. The presence of surface states due to the high evaporation pressure is probably the reason for the high ideality factor. Post metal deposition annealing at 150 °C for 30 min in air lowered the barrier height and decreased the Au/ZnO ideality factor but increased it for Pd/ZnO. The current follows ohmic behavior when the applied forward bias, V(forward), is lower than 0.1 V, whereas for V(forward) between 0.1 and 0.45 V the current follows I∼exp(cV), and at higher forward biases the current-voltage characteristics follow the relation I∼V(2), indicating that the space-charge current-limiting mechanism is dominating the current transport. PMID:21836267

  2. Synthesis and characterization of quasi-aligned ZnCdO nanorods

    NASA Astrophysics Data System (ADS)

    Wang, F. Z.; Ye, Z. Z.; Ma, D. W.; Zhu, L. P.; Zhuge, F.; He, H. P.

    2005-10-01

    Quasi-aligned ZnCdO single-crystal nanorods were prepared for the first time by using thermal evaporation of Zn and CdCl2 on a Si substrate with the presence of Au catalyst. The maximum Cd content was up to about 16.7at.%, which was significantly larger than the thermodynamic solid solubility limits. The ZnCdO nanorods have uniform flat hexagonal crystallographic planes with diameters of about 150nm. Notably, with the Cd content increasing, the ultraviolet near-band-edge emission was redshifted to 407nm(3.04eV ) from 386nm(3.21eV). The direct modulation of the band gap caused by Cd substitution is responsible for the redshift. The possible growth mechanism of the ZnCdO nanorods was discussed.

  3. Vertically aligned self-assembled gold nanorods as low turn-on, stable field emitters

    NASA Astrophysics Data System (ADS)

    Apte, Amey; Joshi, Padmashree; Bhaskar, Prashant; Joag, Dilip; Kulkarni, Sulabha

    2015-11-01

    In this work we have investigated field emission from self-assembled, vertically aligned, gold nanorod arrays, which were synthesized via a colloidal growth method. A field emission current density of ∼1 mA/cm2 was measured for these gold nanorod arrays using an anode-cathode separation of ∼3.5 mm. The field emission investigation of these gold nanorod arrays was carried out at a base pressure of ∼10-8 mbar. The turn on field, defined as the electric field required to obtain a current density of 1 μA/cm2, is observed to be 1.9 V/μm. Assuming a work function value of 5.3 eV, the field enhancement factor β is estimated to be ∼2931, which is higher than the reported values for other gold nanostructures/arrays.

  4. Controlled Defects of Fluorine-incorporated ZnO Nanorods for Photovoltaic Enhancement

    PubMed Central

    Lee, Hock Beng; Ginting, Riski Titian; Tan, Sin Tee; Tan, Chun Hui; Alshanableh, Abdelelah; Oleiwi, Hind Fadhil; Yap, Chi Chin; Jumali, Mohd Hafizuddin Hj.; Yahaya, Muhammad

    2016-01-01

    Anion passivation effect on metal-oxide nano-architecture offers a highly controllable platform for improving charge selectivity and extraction, with direct relevance to their implementation in hybrid solar cells. In current work, we demonstrated the incorporation of fluorine (F) as an anion dopant to address the defect-rich nature of ZnO nanorods (ZNR) and improve the feasibility of its role as electron acceptor. The detailed morphology evolution and defect engineering on ZNR were studied as a function of F-doping concentration (x). Specifically, the rod-shaped arrays of ZnO were transformed into taper-shaped arrays at high x. A hypsochromic shift was observed in optical energy band gap due to the Burstein-Moss effect. A substantial suppression on intrinsic defects in ZnO lattice directly epitomized the novel role of fluorine as an oxygen defect quencher. The results show that 10-FZNR/P3HT device exhibited two-fold higher power conversion efficiency than the pristine ZNR/P3HT device, primarily due to the reduced Schottky defects and charge transfer barrier. Essentially, the reported findings yielded insights on the functions of fluorine on (i) surface –OH passivation, (ii) oxygen vacancies (Vo) occupation and (iii) lattice oxygen substitution, thereby enhancing the photo-physical processes, carrier mobility and concentration of FZNR based device. PMID:27587295

  5. Controlled Defects of Fluorine-incorporated ZnO Nanorods for Photovoltaic Enhancement.

    PubMed

    Lee, Hock Beng; Ginting, Riski Titian; Tan, Sin Tee; Tan, Chun Hui; Alshanableh, Abdelelah; Oleiwi, Hind Fadhil; Yap, Chi Chin; Jumali, Mohd Hafizuddin Hj; Yahaya, Muhammad

    2016-01-01

    Anion passivation effect on metal-oxide nano-architecture offers a highly controllable platform for improving charge selectivity and extraction, with direct relevance to their implementation in hybrid solar cells. In current work, we demonstrated the incorporation of fluorine (F) as an anion dopant to address the defect-rich nature of ZnO nanorods (ZNR) and improve the feasibility of its role as electron acceptor. The detailed morphology evolution and defect engineering on ZNR were studied as a function of F-doping concentration (x). Specifically, the rod-shaped arrays of ZnO were transformed into taper-shaped arrays at high x. A hypsochromic shift was observed in optical energy band gap due to the Burstein-Moss effect. A substantial suppression on intrinsic defects in ZnO lattice directly epitomized the novel role of fluorine as an oxygen defect quencher. The results show that 10-FZNR/P3HT device exhibited two-fold higher power conversion efficiency than the pristine ZNR/P3HT device, primarily due to the reduced Schottky defects and charge transfer barrier. Essentially, the reported findings yielded insights on the functions of fluorine on (i) surface -OH passivation, (ii) oxygen vacancies (Vo) occupation and (iii) lattice oxygen substitution, thereby enhancing the photo-physical processes, carrier mobility and concentration of FZNR based device. PMID:27587295

  6. Controlling the conduction band offset for highly efficient ZnO nanorods based perovskite solar cell

    SciTech Connect

    Dong, Juan; Shi, Jiangjian; Li, Dongmei; Luo, Yanhong; Meng, Qingbo

    2015-08-17

    The mechanism of charge recombination at the interface of n-type electron transport layer (n-ETL) and perovskite absorber on the carrier properties in the perovskite solar cell is theoretically studied. By solving the one dimensional diffusion equation with different boundary conditions, it reveals that the interface charge recombination in the perovskite solar cell can be suppressed by adjusting the conduction band offset (ΔE{sub C}) at ZnO ETL/perovskite absorber interface, thus leading to improvements in cell performance. Furthermore, Mg doped ZnO nanorods ETL has been designed to control the energy band levels. By optimizing the doping amount of Mg, the conduction band minimum of the Mg doped ZnO ETL has been raised up by 0.29 eV and a positive ΔE{sub C} of about 0.1 eV is obtained. The photovoltage of the cell is thus significantly increased due to the relatively low charge recombination.

  7. Rapid fabrication of ZnO nanorod arrays with controlled spacing by micelle-templated solvothermal growth.

    PubMed

    Pelligra, Candice I; Toth, Kristof; Hu, Hanqiong; Osuji, Chinedum O

    2016-01-01

    We present a facile method for the synthesis of nanorod arrays over large areas with fine control over the average rod-rod spacing. Block copolymer micelles are used to template solvothermal synthesis of ZnO nanorods by preferentially enabling reactant diffusion through the micelle cores to an underlying seed layer. The distance between nanorod centers is defined by the micelle number density which is in turn controlled by the molecular weight of the block copolymer, and the block copolymer concentration in a templating film. We demonstrate the ability to control the resulting nanorod number density from ∼100 μm(-2) down to ∼10 μm(-2) with high fidelity. Correspondingly, the distance between nanorod surfaces was varied from ∼60 nm to 230 nm. The method developed here provides a viable approach for rapidly fabricating large-area nanostructured electrodes comprised of nanorod arrays with controlled geometries. The ability to tailor nanorod spacing over a broad range suggests applications in photovoltaics and sensors based on optical resonances can be readily addressed. PMID:26611402

  8. Angle-resolved reflectance of obliquely aligned silver nanorods.

    PubMed

    Wang, X J; Abell, J L; Zhao, Y-P; Zhang, Z M

    2012-04-01

    Arrays of silver nanorods (AgNRs) formed by oblique-angle deposition (OAD) are strongly anisotropic, with either metallic or dielectric characteristics depending on the polarization of incident light, and may be used to enhance Raman scattering and surface plasmon polaritons. This work investigates the polarization-dependent reflectance of inclined AgNR arrays at the wavelengths of 635 and 977 nm. The specular reflectance at various incidence angles and the bidirectional reflectance distribution function were measured with a laser scatterometer, while the directional-hemispherical reflectance was measured with an integrating sphere. The AgNR layer is modeled as an effectively homogenous, optically uniaxial material using the effective medium theory to elucidate the dielectric or metallic response for differently polarized incidence. The thin-film optics formulation is modified considering optical anisotropy and surface scattering. This study helps gain a better understanding of optical properties of nanostructured materials. PMID:22505070

  9. Effects of the geometries of micro-scale substrates on the surface morphologies of ZnO nanorod-based hierarchical structures

    NASA Astrophysics Data System (ADS)

    Jing, Weixuan; Qi, Han; Shi, Jiafan; Jiang, Zhuangde; Zhou, Fan; Cheng, Yanyan; Gao, Kun

    2015-11-01

    This paper identifies and investigates the influencing factors and their effects on the surface morphologies of ZnO nanorod-based hierarchical structures. With ZnO nanorods hydrothermally synthesized on a piece of planar glass, an optical fiber core, and a SiO2 microsphere, three kinds of ZnO nanorod-based hierarchical structures were fabricated. It is found that not only the synthesizing parameters but also the geometries of the micro-scale substrates affect significantly the nucleation densities of seed layers and the Zn2+ diffusion zones of growth solution upon the substrate surfaces. These two factors further give rise to varied diameters and orientation of the ZnO nanorods as well as different sizes of the pits among the bundles of ZnO nanorods, which eventually result in different surface morphologies of corresponding hierarchical structures. With Zn2+ concentration of the growth solution increasing, side-by-side coalescence among neighboring ZnO nanorods first appears on the optical fiber core. The different curvature radii of the optical fiber core at front and side view lead to the anisotropic surface morphology of the related hierarchical structure. Although their curvature radii are the same, the different geometries of the optical fiber core at side view and the planar glass account for varied surface morphologies of the corresponding hierarchical structures.

  10. Amperometric Non-Enzymatic Hydrogen Peroxide Sensor Based on Aligned Zinc Oxide Nanorods

    PubMed Central

    Al-Hardan, Naif H.; Abdul Hamid, Muhammad Azmi; Shamsudin, Roslinda; Othman, Norinsan Kamil; Kar Keng, Lim

    2016-01-01

    Zinc oxide (ZnO) nanorods (NRs) have been synthesized via the hydrothermal process. The NRs were grown over a conductive glass substrate. A non-enzymatic electrochemical sensor for hydrogen peroxide (H2O2), based on the prepared ZnO NRs, was examined through the use of current-voltage measurements. The measured currents, as a function of H2O2 concentrations ranging from 10 μM to 700 μM, revealed two distinct behaviours and good performance, with a lower detection limit (LOD) of 42 μM for the low range of H2O2 concentrations (first region), and a LOD of 143.5 μM for the higher range of H2O2 concentrations (second region). The prepared ZnO NRs show excellent electrocatalytic activity. This enables a measurable and stable output current. The results were correlated with the oxidation process of the H2O2 and revealed a good performance for the ZnO NR non-enzymatic H2O2 sensor. PMID:27367693

  11. Wafer-scale high-throughput ordered growth of vertically aligned ZnO nanowire arrays.

    PubMed

    Wei, Yaguang; Wu, Wenzhuo; Guo, Rui; Yuan, Dajun; Das, Suman; Wang, Zhong Lin

    2010-09-01

    This article presents an effective approach for patterned growth of vertically aligned ZnO nanowire (NW) arrays with high throughput and low cost at wafer scale without using cleanroom technology. Periodic hole patterns are generated using laser interference lithography on substrates coated with the photoresist SU-8. ZnO NWs are selectively grown through the holes via a low-temperature hydrothermal method without using a catalyst and with a superior control over orientation, location/density, and as-synthesized morphology. The development of textured ZnO seed layers for replacing single crystalline GaN and ZnO substrates extends the large-scale fabrication of vertically aligned ZnO NW arrays on substrates of other materials, such as polymers, Si, and glass. This combined approach demonstrates a novel method of manufacturing large-scale patterned one-dimensional nanostructures on various substrates for applications in energy harvesting, sensing, optoelectronics, and electronic devices. PMID:20681617

  12. Superior environment resistance of quartz crystal microbalance with anatase TiO2/ZnO nanorod composite films

    NASA Astrophysics Data System (ADS)

    Qiang, Wei; Wei, Li; Shaodan, Wang; Yu, Bai

    2015-08-01

    The precise measurement of quartz crystal microbalance (QCM) in the detection and weighing of organic gas molecules is achieved due to excellent superhydrophobicity of a deposited film composite. Photocatalysis is utilized as a method for the self-cleaning of organic molecules on the QCM for extended long-term stability in the precision of the instrument. In this paper, ZnO nanorod array is prepared via in situ methods on the QCM coated with Au film via hydrothermal process. Subsequently, a TiO2/ZnO composite film is synthesized by surface modification with TiO2 via sol-gel methods. Results show the anatase TiO2/ZnO nanorod composite film with a sharp, pencil-like structure exhibiting excellent superhydrophobicity (water contact angle of 155°), non-sticking water properties, and an autonomous cleaning property under UV irradiation. The anatase TiO2/ZnO nanorod composite film facilitates the precise measurement and extended lifetime of the QCM for the detection of organic gas molecules.

  13. Physical properties of fish gelatin-based bio-nanocomposite films incorporated with ZnO nanorods

    PubMed Central

    2013-01-01

    Well-dispersed fish gelatin-based nanocomposites were prepared by adding ZnO nanorods (NRs) as fillers to aqueous gelatin. The effects of ZnO NR fillers on the mechanical, optical, and electrical properties of fish gelatin bio-nanocomposite films were investigated. Results showed an increase in Young's modulus and tensile strength of 42% and 25% for nanocomposites incorporated with 5% ZnO NRs, respectively, compared with unfilled gelatin-based films. UV transmission decreased to zero with the addition of a small amount of ZnO NRs in the biopolymer matrix. X-ray diffraction showed an increase in the intensity of the crystal facets of (10ī1) and (0002) with the addition of ZnO NRs in the biocomposite matrix. The surface topography of the fish gelatin films indicated an increase in surface roughness with increasing ZnO NR concentrations. The conductivity of the films also significantly increased with the addition of ZnO NRs. These results indicated that bio-nanocomposites based on ZnO NRs had great potentials for applications in packaging technology, food preservation, and UV-shielding systems. PMID:23981366

  14. Preparation and XRD analyses of Na-doped ZnO nanorod arrays based on experiment and theory

    NASA Astrophysics Data System (ADS)

    Yang, X. P.; Lu, J. G.; Zhang, H. H.; Chen, Y.; Kan, B. T.; Zhang, J.; Huang, J.; Lu, B.; Zhang, Y. Z.; Ye, Z. Z.

    2012-03-01

    ZnO nanorod arrays (NRAs) with different Na contents were prepared by thermal evaporation. Sodium pyrophosphate was adopted as the Na source. The Na contents in NRAs were determined by X-ray photoelectron spectra to be 0, 6.1, and 9.4 at.%. X-ray diffraction (XRD) analyses of Na-doped ZnO NRAs were performed in experiment and by first-principle calculation with the assumption of Na substitutions. A couple of typical changes were found in XRD patterns of Na-doped ZnO. The simulation results well agreed with the experimental data, which revealed that Na mainly located at the substitutional sites in Na-doped ZnO NRAs.

  15. Effects of crystallographic facet-specific peptide adsorption along single ZnO nanorods on the characteristic fluorescence intensification on nanorod ends (FINE) phenomenon.

    PubMed

    Singh, Manpreet; Zhuo, Xiaolu; Choi, Daniel S; Gonzalez, Lorelis E; Wang, Jianfang; Hahm, Jong-in

    2015-11-28

    The precise effect of crystallographically discriminating biomolecular adsorption on the fluorescence intensification profiles of individual zinc oxide nanorod (ZnO NR) platforms was elucidated in this study by employing peptide binding epitopes biased towards particular ZnO crystal surfaces and isolating the peptides on given crystalline facets of ZnO NRs. Subsequently, the fluorescence emission profiles of the preferentially bound peptide cases on the basal versus prismic planes of ZnO NRs were carefully evaluated both experimentally and via computer simulations. The phenomenon of fluorescence intensification on NR ends (FINE) was persistently observed on the individual ZnO NR platforms, regardless of the location of the bound peptides. In contrast to the consistent occurrence of FINE, the degree and magnitude of FINE were largely influenced by the discriminatory peptide adsorption to different ZnO NR facets. The temporal stability of the fluorescence signal was also greatly affected by the selectively located peptides on the ZnO NR crystal when spatially resolved on different NR facets. Similarities and differences in the spatial and temporal fluorescence signal of the crystalline NR facet-specific versus -nonspecific biomolecular adsorption events were then compared. To further illuminate the basis of our experimental findings, we also performed finite-difference-time-domain (FDTD) calculations and examined the different degrees of FINE by modelling the biased peptide adsorption cases. Our multifaceted efforts, providing combined insight into the spatial and temporal characteristics of the biomolecular fluorescence signal characteristically governed by the biomolecular location on the specific NR facets, will be valuable for novel applications and accurate signal interpretation of ZnO NR-based biosensors in many rapidly growing, highly miniaturized biodetection configurations. PMID:26509316

  16. Improvement in the Grain Growth of Plasma-Treated Nano-Sized ZnO Films and Their Characterization.

    PubMed

    Chen, Mi; Chou, Ching-Chuan; Lin, Ching-Cheng; Koo, Horng-Show

    2015-11-01

    The well-aligned ZnO nanorods were rapidly grown on an indium tin oxide (ITO)-coated glass substrate using Al-doped ZnO (AZO) thin film as seed layer by the microwave-assisted hydrothermal chemical route. The optimal growth conditions for the well-aligned ZnO nanorods were obtained by modulating H2 plasma pretreatment time for the seed layer and synthesis time for ZnO nanorods. The H2 plasma effect of the seed layer on the alignment, growth rate and crysallinity of ZnO nanods is also demonstrated. The synthesized ZnO nanorods were annealed in atmosphere of N2, O2 and H2 + N2 mixed gas to improve the related physical characteristics, the ZnO nanorods on grapheme/ITO substrate were also investigated. The results show that the alignment and growth rate of ZnO nanorods depends on the physical characteristics and roughness of the seed layer, which can be improved by H2 plasma pretreatment. The average growth rate of ZnO nanorods synthesized by microwave hydrothermal technique is about 2.2 μm/hr which significantly superior to other conventional techniques. After the appropriate N2 annealing treatment, good quality and well-aligned ZnO nanorods, which are single crystal with stacking defects and pyramid or candle shape, were obtained. A fundamental model of the effect of H2 plasma pretreatment on the surface of seed layer and the growth of ZnO nanorods using a microwave-assisted hydrothermal chemical route is also described. PMID:26726662

  17. High-yield chemical synthesis of hexagonal ZnO nanoparticles and nanorods with excellent optical properties.

    PubMed

    Giri, P K; Bhattacharyya, S; Chetia, B; Kumari, Satchi; Singh, Dilip K; Iyer, P K

    2012-01-01

    Large yield and low temperature growth of nanostructures are key requirements for fulfilling the demand of large scale applications of nanomaterials. Here, we report a highly efficient chemical method to synthesize high quality hexagonal ZnO nanoparticle and nanorods utilizing the low temperature oxidation of metallic zinc powder in the presence of an appropriate catalyst. This one-step method has advantages such as low temperature (90 degrees C) and atmospheric pressure synthesis and a high yield (> 90%). Microstructure and optical properties of the as-synthesized ZnO nanoparticles are found to be identical or better than those of the commercial ZnO nanopower (Sigma-Aldrich). In particular, in comparison to the commercial nanopowder the as-grown ZnO nanorods and nanoparticles exhibit stronger UV absorption at 376 nm and intense UV photoluminescence emission at -382 nm, with negligible defect emission band. This method is suitable for large-scale production of nanosized ZnO and could be extended for the synthesis of other metal oxides. PMID:22523966

  18. The effect of annealing temperatures to prepare ZnO seeds layer on ZnO nanorods array/TiO2 nanoparticles photoanode

    NASA Astrophysics Data System (ADS)

    Chou, Hsueh-Tao; Hsu, Ho-Chun

    2016-02-01

    In this study, we have fabricated a ZnO nanorods array/TiO2 nanoparticles thin-film as a photoanode, and also investigated the annealing effect at various temperatures (as grown, 250 °C, 350 °C, 450 °C and 550 °C) on ZnO seeds layer. The material properties of ZnO nanorods array were investigated by field emission scanning electron microscopy (FE-SEM), energy dispersive spectrometer (EDS), X-ray diffraction (XRD) and ultraviolet visible spectroscopy. Besides, the performances of solar cells were evaluated using a source meter (Keithley 2400), which included open-circuit voltage (VOC), short-circuit current density (JSC), fill factor (F.F.) and power conversion efficiency (η%) at one sun (A.M. 1.5G, 100 mW/cm2). The electrochemical properties of the cells were analyzed by electrochemical impedance spectroscopy (EIS). From the EIS results, the cell performances were affected by annealing temperature, especially the fill-factor, at an annealing temperature of 550 °C due to the annealing treatment can enhance the connection between the interfaces of ZnO seeds/TCO, improving the electron lifetime, reducing the electron recombination loss. Finally, the sample annealing at 550 °C has the highest fill-factor of 44, power conversion efficiency of 0.19%, the highest Rct2 of 162.8 Ω and long electron lifetime of 7.25 ms.

  19. Structure and magnetic properties of three-dimensional (La,Sr)MnO{sub 3} nanofilms on ZnO nanorod arrays

    SciTech Connect

    Gao Haiyong; Gao Puxian; Shimpi, Paresh; Guo Yanbing; Cai Wenjie; Lin Huijan; Staruch, M.; Jain, Menka

    2011-03-21

    Three-dimensional (3D) cubic perovskite (La,Sr)MnO{sub 3} (LSMO) nanofilms have been deposited on ZnO nanorod arrays with controlled dimensionality and crystallinity by radio frequency (rf) magnetron sputtering and post thermal annealing. Compared to the two-dimensional (2D) LSMO nanofilm on flat Si, the structure and magnetic properties of 3D LSMO nanofilms on ZnO nanorod arrays have a strong anisotropic morphology and thickness dependence. Ferromagnetic property has been observed in both 2D and 3D LSMO nanofilms while a ferromagnetic-superparamagnetic transition was revaled in 3D LSMO nanofilms on ZnO nanorod array with decreasing nanofilm thickness, due to a large surface dispersion effect. The LSMO/ZnO nanofilm/nanorod structures could open up new avenues for intriguing magnetic properties studies and applications of nanoscale perovskites.

  20. Tuning of deep level emission in highly oriented electrodeposited ZnO nanorods by post growth annealing treatments

    NASA Astrophysics Data System (ADS)

    Simimol, A.; Manikandanath, N. T.; Anappara, Aji A.; Chowdhury, Prasanta; Barshilia, Harish C.

    2014-08-01

    Highly dense and c-axis oriented zinc oxide (ZnO) nanorods with hexagonal wurtzite facets were deposited on fluorine doped tin oxide coated glass substrates by a simple and cost-effective electrodeposition method at low bath temperature (80 °C). The as-grown samples were then annealed at various temperatures (TA = 100-500 °C) in different environments (e.g., zinc, oxygen, air, and vacuum) to understand their photoluminescence (PL) behavior in the ultra-violet (UV) and the visible regions. The PL results revealed that the as-deposited ZnO nanorods consisted of oxygen vacancy (VO), zinc interstitial (Zni), and oxygen interstitial (Oi) defects and these can be reduced significantly by annealing in different environments at optimal annealing temperatures. However, the intensity of deep level emission increased for TA greater than the optimized values for the respective environments due to the introduction of various defect centers. For example, for TA ≥ 450 °C in the oxygen and air environments, the density of Oi defects increased, whereas, the green emission associated with VO is dominant in the vacuum annealed (TA = 500 °C) ZnO nanorods. The UV peak red shifted after the post-growth annealing treatments in all the environments and the vacuum annealed sample exhibited highest UV peak intensity. The observations from the PL data are supported by the micro-Raman spectroscopy. The present study gives new insight into the origin of different defects that exist in the electrodeposited ZnO nanorods and how these defects can be precisely controlled in order to get the desired emissions for the opto-electronic applications.

  1. Tuning of deep level emission in highly oriented electrodeposited ZnO nanorods by post growth annealing treatments

    SciTech Connect

    Simimol, A.; Manikandanath, N. T.; Chowdhury, Prasanta; Barshilia, Harish C.; Anappara, Aji A.

    2014-08-21

    Highly dense and c-axis oriented zinc oxide (ZnO) nanorods with hexagonal wurtzite facets were deposited on fluorine doped tin oxide coated glass substrates by a simple and cost-effective electrodeposition method at low bath temperature (80 °C). The as-grown samples were then annealed at various temperatures (T{sub A} = 100–500 °C) in different environments (e.g., zinc, oxygen, air, and vacuum) to understand their photoluminescence (PL) behavior in the ultra-violet (UV) and the visible regions. The PL results revealed that the as-deposited ZnO nanorods consisted of oxygen vacancy (V{sub O}), zinc interstitial (Zn{sub i}), and oxygen interstitial (O{sub i}) defects and these can be reduced significantly by annealing in different environments at optimal annealing temperatures. However, the intensity of deep level emission increased for T{sub A} greater than the optimized values for the respective environments due to the introduction of various defect centers. For example, for T{sub A} ≥ 450 °C in the oxygen and air environments, the density of O{sub i} defects increased, whereas, the green emission associated with V{sub O} is dominant in the vacuum annealed (T{sub A} = 500 °C) ZnO nanorods. The UV peak red shifted after the post-growth annealing treatments in all the environments and the vacuum annealed sample exhibited highest UV peak intensity. The observations from the PL data are supported by the micro-Raman spectroscopy. The present study gives new insight into the origin of different defects that exist in the electrodeposited ZnO nanorods and how these defects can be precisely controlled in order to get the desired emissions for the opto-electronic applications.

  2. Preparation and Photovoltaic Properties of Dye Sensitized Solar Cells Using ZnO Nanorods Stacking Films on AZO Substrate as Photoanode.

    PubMed

    Xu, Yang; Wang, Xina; Liu, Rong; Wang, Hao

    2016-04-01

    Three-dimensional stacking of ZnO nanorods on conducting aluminum-doped ZnO (AZO) glass were studied as efficient photoanodes of dye sensitized solar cells (DSSCs). By changing hydrothermal growth time and cycle times, the thickness of ZnO nanorods stacking films varied from 30 µm to 64 µm, and its influence on the energetic conversion efficiency of the DSSCs based on the stacking films photoanodes was investigated. The loading density of N719 on the surface of ZnO nanorods was studied to increase the efficiency of the cells. Annealing experiments showed that the AZO substrates remained good conductors until heated above 350 °C. A photoelectric conversion efficiency as high as ~2.0% together with ISC of ~9.5 mA/cm2, VOC of ~0.5 V and FF of ~41.4% was achieved for the DSSC using 50 µm-thick film stacking by ZnO nanorods as photoanode and N719 as sensitizer under illumination of AM1.5G solar light (power density of 100 mW/cm2). A charge separation and transfer mechanism was proposed for the ZnO nanorods stacking electrode-based DSSCs. PMID:27451677

  3. Electrical and hydrogen-sensing characteristics of field effect transistors based on nanorods of ZnO and WO2.72.

    PubMed

    Rout, Chandra Sekhar; Kulkarni, G U; Rao, C N R

    2009-09-01

    Top-gated field effect transistors (FETs) using Au-gap (5 microm) electrodes on glass substrate and SiO2/Si as gate have been fabricated with undoped and doped nanorods of ZnO as well as with WO2.72 nanorods as active semiconductor elements. The I-V characteristics at different gate voltages show that the nanorods are n-type semiconductors and the derived transfer characteristics show that the FET devices function in the depletion mode. Al-doping (3 at%) enhances the carrier mobility of ZnO nanorods to 128.6 cm2/V x s as against to 0.009 cm2/V x s estimated in the case of the undoped nanorods. Doping with Cd and Mg (3 at%) as well as N (approximately 1 at%) similarly increases the mobility although to a smaller extent. The Cd-doped ZnO nanorods exhibit the high sensitivity (defined as the ratio of the resistance in air to that in the hydrogen) (20) for 1000 ppm of hydrogen. Application of gate voltage decreases the recovery times of the nanorod sensors. FETs based on WO2.72 nanorods also show the depletion mode type characteristics and a carrier mobility of 8.38 cm2/V x s is obtained. The WO2.72 based FETs exhibit good sensitivity (approximately 10) for 1000 ppm hydrogen. PMID:19928282

  4. H2- and NH3-treated ZnO nanorods sensitized with CdS for photoanode enhanced in photoelectrochemical performance

    NASA Astrophysics Data System (ADS)

    Vuong, Nguyen Minh; Hien, Truong Thi; Quang, Nguyen Duc; Chinh, Nguyen Duc; Lee, Dong Suk; Kim, Dahye; Kim, Dojin

    2016-06-01

    A ZnO/CdS core-shell nanorod structure is studied for use as photoanode in photoelectrochemical cell for water splitting. The focus is to examine the effect of hydrogen and/or nitrogen doping of ZnO nanorods on its performance as photoanode. ZnO nanorods hydrothermally synthesized on ITO glass substrate are heat-treated in pure hydrogen ambient and then in atmospheric pressure of ammonia for H- and N-doping of ZnO. The H- and/or N-doped ZnO nanorod structure (N/H:ZnO) reveal an enhanced photocurrent and photo-to-current conversion efficiency in comparison to untreated ZnO nanorods by shifting the absorption edge towards visible region and increasing absorption of infrared region wavelengths. CdS sensitization of the nanorods is also studied. The morphology and properties of the samples are examined by SEM, XRD, UV-vis absorption and photoluminescence. Optimization of the ZnO nanorod growth and CdS coating processes are also undertaken. An optimized N/H:ZnO nanorods sensitized by CdS layer yields a photocurrent density of ∼12.61 mA cm-2 at 0 V (vs. SCE) and photon-to-current conversion efficiency of ∼4.5% (at -0.73 V vs. SCE) in 0.5 M Na2S solution under a simulated solar light. The H2 gas generation with the optimal structure is about 6 mL h-1 cm-2.

  5. Enhance the light-harvesting capability of the ITO-free inverted small molecule solar cell by ZnO nanorods.

    PubMed

    Lin, Ming-Yi; Wu, Shang-Hsuan; Hsiao, Li-Jen; Budiawan, Widhya; Boopathi, Karunakara Moorthy; Tu, Wei-Chen; Chang, Yia-Chung; Chu, Chih-Wei

    2016-08-01

    The ITO-free inverted SMPV1:PC71BM solar cells with an Al doped ZnO (AZO) transparent electrodes are fabricated. The AZO thin film prepared by pulsed laser deposition (PLD) technique exhibits high transmission (>85%) and low sheet resistance (~30 Ω/sq) and the power conversion efficiency (PCE) of devices based on AZO electrode can reach around 4%. To further enhance the light harvesting of the absorption layer of solar cells, ZnO nanorods interlayer is grown on the AZO layer before the deposition the active layer. The absorption spectrums of devices under various conditions are also simulated by RCWA method to identify the optical saturation length of the ZnO nanorods. The PCE of ITO-free inverted small molecule solar cell improved with ZnO nanorods can reach 6.6%. PMID:27505758

  6. Dendrite-Free Lithium Deposition with Self-Aligned Nanorod Structure

    SciTech Connect

    Zhang, Yaohui; Qian, Jiangfeng; Xu, Wu; Russell, Selena M.; Chen, Xilin; Nasybulin, Eduard; Bhattacharya, Priyanka; Engelhard, Mark H.; Mei, Donghai; Cao, Ruiguo; Ding, Fei; Cresce, Arthur V.; Xu, Kang; Zhang, Jiguang

    2014-12-10

    Suppressing lithium (Li) dendrite growth is one of the most critical challenges for the development of Li metal batteries. We recently proposed a novel self-healing electrostatic shield (SHES) mechanism which can fundamentally change the Li deposition behavior and lead to the growth of dendrite-free Li films. Here, we report for the first time that the as-deposited dendrite-free Li films grown with assistance of SHES additive are actually composed of highly-aligned and compacted Li nanorods with hemispherical tips. Both surface and cross sectional morphology evolution of the Li films during repeated Li deposition/stripping processes were systematically investigated. A new model has been established to explain the formation and evolution of the Li nanorods. A fundamental understanding on the internal structure and evolution of Li metal films may lead to new approaches to stabilize the long term cycling stability of Li metal anode.

  7. Transmission electron microscopy and time resolved optical spectroscopy study of the electronic and structural interactions of ZnO nanorods with bovine serum albumin.

    PubMed

    Klaumünzer, M; Weichsel, U; Mačković, M; Spiecker, E; Peukert, W; Kryschi, C

    2013-08-22

    The adsorption behavior and electronic interactions of bovine serum albumin (BSA) with ZnO nanorod surfaces were investigated using high-resolution transmission electron microscopy as well as stationary and time-resolved optical spectroscopy techniques. Transmission electron microscopy shows that ZnO nanorod surfaces are surrounded by a homogeneous amorphous BSA film with thicknesses between ~2.5 and 5.0 nm. The electronic structure and adsorption geometry of BSA were examined using high-angle annular dark field scanning transmission electron microscopy combined with electron energy loss spectroscopy. The adsorption process was observed to result into an unfolded conformation of BSA becoming predominantly bound in the side-on orientation at the ZnO surface. This adsorption mode of the BSA molecules allows for a strong interaction with surface states of the ZnO nanorods. This is obvious from its efficient quenching of the defect-center photoluminescence of ZnO. Complementary information of electronic interactions across the ZnO nanorod interface was obtained from femtosecond transient absorption spectroscopy experiments. The rise dynamics of the measured transients revealed altered hole trapping dynamics and, thus, indicated to heterogeneous charge transfer as emerging from adsorbed BSA molecules to defect centers of the ZnO interface. PMID:23889004

  8. Aqueous chemical growth of free standing vertical ZnO nanoprisms, nanorods and nanodiskettes with improved texture co-efficient and tunable size uniformity

    NASA Astrophysics Data System (ADS)

    Ram, S. D. Gopal; Ravi, G.; Athimoolam, A.; Mahalingam, T.; Kulandainathan, M. Anbu

    2011-12-01

    Tuning the morphology, size and aspect ratio of free standing ZnO nanostructured arrays by a simple hydrothermal method is reported. Pre-coated ZnO seed layers of two different thicknesses (≈350 nm or 550 nm) were used as substrates to grow ZnO nanostructures for the study. Various parameters such as chemical ambience, pH of the solution, strength of the Zn2+ atoms and thickness of seed bed are varied to analyze their effects on the resultant ZnO nanostructures. Vertically oriented hexagonal nanorods, multi-angular nanorods, hexagonal diskette and popcorn-like nanostructures are obtained by altering the experimental parameters. All the produced nanostructures were analysed by X-ray powder diffraction analysis and found to be grown in the (002) orientation of wurtzite ZnO. The texture co-efficient of ZnO layer was improved by combining a thick seed layer with higher cationic strength. Surface morphological studies reveal various nanostructures such as nanorods, diskettes and popcorn-like structures based on various preparation conditions. The optical property of the closest packed nanorods array was recorded by UV-VIS spectrometry, and the band gap value simulated from the results reflect the near characteristic band gap of ZnO. The surface roughness profile taken from the Atomic Force Microscopy reveals a roughness of less than 320 nm.

  9. Fundamental understanding of the growth, doping and characterization of aligned ZnO nanowires

    NASA Astrophysics Data System (ADS)

    Shen, Gang

    Zinc oxide (ZnO) is a II-VI semiconductor whose wide direct bandgap (3.37 eV) and large exciton binding energy (60 meV) make it compelling for optoelectronic devices such as light emitting diodes, lasers, photodetectors, solar cells, and mechanical energy harvesting devices. One dimensional structures of ZnO (nanowires) have become significant due to their unique physical properties arising from quantum confinement, and they are ideal for studying transport mechanisms in one-dimensional systems. In this doctoral research work, ZnO nanowire (NW) arrays were synthesized on sapphire substrates through carbo-thermal reduction of ZnO powders, and the effects of growth parameters on the properties of ZnO NW arrays were studied by scanning and transmission electron microscopy, X-ray diffraction, photoluminescence and Raman spectroscopy. Based on the phonon mode selection rules in wurtzite ZnO, confocal Raman spectroscopy was used to assess the alignment of ZnO NWs in an array, thereby complementing X-ray diffraction. Al doped ZnO NW arrays were achieved by mixing Al powder into the ZnO and graphite source mixture, and the presence of Al was confirmed by Energy-dispersive X-ray spectroscopy. The incorporation of Al had the effects of lowering the electrical resistivity, slightly deteriorating crystal quality and suppressing defect related green emission. Two models of ZnO NW growth were developed by establishing the relationship between NW length and diameter for undoped and Al doped ZnO NWs separately. The growth of undoped ZnO NWs followed the diffusion-induced model which was characterized by thin wires being longer than thick wires, while the growth of Al doped ZnO was controlled by Gibbs-Thomson effect which was characterized by thin wires being shorter than thin wires. Local electrode atom probe analysis of ZnO NWs was carried out to study the crystal stoichiometry and Al incorporation. Undoped ZnO NWs were found to be high purity with no detectable impurities

  10. Fabrication of a novel microsensor consisting of electrodeposited ZnO nanorod-coated crossed Cu micropillars and the effects of nanorod coating morphology on the gas sensing.

    PubMed

    Tseng, Yao-Tien; Lin, Jing-Chie; Ciou, Yong-Jie; Hwang, Yean-Ren

    2014-07-23

    A novel microsensor, consisting of crossed Cu micropillars coated with ZnO nanorods, was fabricated by electrochemical methods for detecting gas in a small space. The Cu micropillars (80 μm diameter, 10 mm long) were prepared by microanode-guided electroplating (MAGE) on the periphery of a square copper pad (dimensions 5.0 mm × 5.0 mm × 1.0 mm). The micropillars were electrochemically coated with a 500 nm thick layer of ZnO nanorods deposited from a bath containing 2.0 mM zinc chloride and H2O2 varying in 5, 10, 15, and 20 mM. Two ZnO-coated pillars were crossed to form a microsensor by approaching the Cu pads below, which was adhered to an alumina substrate with silver paste and connected to conducting wires for measurement. The morphology of the coating of ZnO nanorods, which was found to be determined by the concentration of H2O2 in the bath, influenced the gas sensing. The morphology of the coating was characterized by scanning electron microscopy; the structural analysis was carried out by X-ray diffraction and high-resolution transmission electron microscopy (HRTEM); the surface analysis was carried out by X-ray photoelectron spectroscopy; and the defects were determined with photoluminescence (PL) spectra. We thus investigated the effect of the morphology of the coating on the sensing properties by introducing a stream of gases varying in CO/air ratios to understand the sensing mechanism of the microsensor. PMID:24960114

  11. Solvothermal Preparation of ZnO Nanorods as Anode Material for Improved Cycle Life Zn/AgO Batteries

    PubMed Central

    Ullah, Shafiq; Ahmed, Fiaz; Badshah, Amin; Ali Altaf, Ataf; Raza, Ramsha; Lal, Bhajan; Hussain, Rizwan

    2013-01-01

    Nano materials with high surface area increase the kinetics and extent of the redox reactions, thus resulting in high power and energy densities. In this study high surface area zinc oxide nanorods have been synthesized by surfactant free ethylene glycol assisted solvothermal method. The nanorods thus prepared have diameters in the submicron range (300∼500 nm) with high aspect ratio. They have uniform geometry and well aligned direction. These nanorods are characterized by XRD, SEM, Specific Surface Area Analysis, solubility in alkaline medium, EDX analysis and galvanostatic charge/discharge studies in Zn/AgO batteries. The prepared zinc oxide nanorods have low solubility in alkaline medium with higher structural stability, which imparts the improved cycle life stability to Zn/AgO cells. PMID:24146807

  12. Optical and structural properties of amorphous Se x Te100- x aligned nanorods

    NASA Astrophysics Data System (ADS)

    Al-Agel, Faisal A.

    2013-12-01

    In the present work, we report studies on optical and structural phenomenon in as-deposited thin films composed of aligned nanorods of amorphous Se x Te100- x ( x = 3, 6, 9, and 12). In structural studies, field emission scanning electron microscopic (FESEM) images suggest that these thin films contain high yield of aligned nanorods. These nanorods show a completely amorphous nature, which is verified by X-ray diffraction patterns of these thin films. Optical studies include the measurement of spectral dependence of absorption, reflection, and transmission of these thin films, respectively. On the basis of optical absorption data, a direct optical band gap is observed. This observation of a direct optical band gap in these nanorods is interesting as chalcogenides normally show an indirect band gap, and due to this reason, these materials could not become very popular for semiconducting devices. Therefore, this is an important report and will open up new directions for the application of these materials in semiconducting devices. The value of this optical band gap is found to decrease with the increase in selenium (Se) concentration. The reflection and absorption data are employed to estimate the values of optical constants (extinction coefficient ( k) and refractive index ( n)). From the spectral dependence of these optical constants, it is found that the values of refractive index ( n) increase, whereas the values of extinction coefficient ( k) decrease with the increase in photon energy. The real and imaginary parts of dielectric constants calculated with the values of extinction coefficient ( k) and refractive index ( n), are found to vary with photon energy and dopant concentration.

  13. Raman spectroscopic investigation of the confined optical phonon modes in the aligned CdSe nanorod arrays

    NASA Astrophysics Data System (ADS)

    Nobile, Concetta; Carbone, Luigi; Kudera, Stefan; Manna, Liberato; Cingolani, Roberto; Krahne, Roman; Fonoberov, Vladimir A.; Balandin, Alexander A.; Chilla, Gerwin; Kipp, Tobias; Heitmann, Detlef

    2007-03-01

    Nanocrystal rods have emerged as promising nanostructured material for both fundamental studies of nanoscale effects and for optical and electronic device applications. We investigated the optical phonon excitations in laterally aligned CdSe nanocrystal rod arrays using resonant Raman scattering. Electric-field mediated alignment between interdigitated electrodes has been used to prepare the samples. We report Raman experiments that probe the optical lattice vibrations in ordered arrays of CdSe nanorods with respect to the nanorod orientation. The packing of nanorods into dense arrays leads to the suppression of the surface optical phonon modes. In the longitudinal-optical phonon peak we observe a fine structure that depends on the relative orientation of the nanorods with respect to the incident light polarization. Detailed comparison of the experimental data with the first-principle calculations for corresponding nanostructures, which reveal the symmetry of the phonon potentials for the Raman active modes, provides a qualitative explanation of the experimentally observed phonon modes.

  14. Hydrothermal growth and conductivity enhancement of (Al, Cu) co-doped ZnO nanorods thin films

    NASA Astrophysics Data System (ADS)

    Chakraborty, Mohua; Mahapatra, Preetilata; Thangavel, R.

    2016-05-01

    The incorporation of Al, Cu co-doping in ZnO host lattice plays an important role in modification of structural, optical and electrical properties in optoelectronic devices. In the present work, we were grown one dimensional ZnO nanorods (NRs) doped with different concentration of Al (0%~5%) and Cu was kept 20 M% on ITO glass substrates using a facile hydrothermal method, and investigated the effect of the codoping on the surface morphology and the electrical and optical performances of the doped ZnO NRs as photo anodes for solar water splitting applications. The crystallite size of NRs shows tuning in the band gap between 3.194 (Zn0.79Al0.01Cu0.2O) to 3.212 eV (Zn0.75Al0.05Cu0.2O) with Aluminium doping concentration and a remarkable improvement in current density (J) from 0.05 mA/cm2 to 4.98 mA/cm2 was achieved by incorporating Al and Cu has a critical effect of ZnO nanorods.

  15. Non-destructive quantification of alignment of nanorods embedded in uniaxially stretched polymer films

    NASA Astrophysics Data System (ADS)

    Stoenescu, Stefan; Truong, Vo-Van; Packirisamy, Muthukumaran

    2014-03-01

    Among several methods developed for uniaxial alignment of metallic nanorods for optical applications, alignment by film stretching consists in embedding the rods in a transparent thin film of thermoplastic polymer, followed by simultaneous heating and uniaxial stretching of the composite film. As to the quantification of the resulting alignment, it has been limited to statistical calculations based on microscopic examination, which is incomplete, subject to errors due to geometric distortions of the scanning electron microscope images and destructive, since it involves cutting of samples. In contrast, we present in this paper a non-destructive quantification of the average orientation of the rods, based on a probabilistic approach combined with numerical simulations of absorbance spectra and spectrometric characterization of the composite film. Assuming electromagnetically non-interacting rods, we consider the longitudinal absorbance peak of their ensemble to consist of the superposition of their individual spectra that we obtain by numerical simulation using the size and shape adapted dielectric function of the metal and the finite difference time domain method. The accuracy of the solution depends on the number of discretization intervals, the accuracy of the numerical simulations, and the accurate knowledge of the polydispersity of the rods. For the sake of concreteness, we used nanorods to describe the quantification steps but the method is equally valid for any dichroic particles.

  16. Non-destructive quantification of alignment of nanorods embedded in uniaxially stretched polymer films

    SciTech Connect

    Stoenescu, Stefan Packirisamy, Muthukumaran; Truong, Vo-Van

    2014-03-21

    Among several methods developed for uniaxial alignment of metallic nanorods for optical applications, alignment by film stretching consists in embedding the rods in a transparent thin film of thermoplastic polymer, followed by simultaneous heating and uniaxial stretching of the composite film. As to the quantification of the resulting alignment, it has been limited to statistical calculations based on microscopic examination, which is incomplete, subject to errors due to geometric distortions of the scanning electron microscope images and destructive, since it involves cutting of samples. In contrast, we present in this paper a non-destructive quantification of the average orientation of the rods, based on a probabilistic approach combined with numerical simulations of absorbance spectra and spectrometric characterization of the composite film. Assuming electromagnetically non-interacting rods, we consider the longitudinal absorbance peak of their ensemble to consist of the superposition of their individual spectra that we obtain by numerical simulation using the size and shape adapted dielectric function of the metal and the finite difference time domain method. The accuracy of the solution depends on the number of discretization intervals, the accuracy of the numerical simulations, and the accurate knowledge of the polydispersity of the rods. For the sake of concreteness, we used nanorods to describe the quantification steps but the method is equally valid for any dichroic particles.

  17. Self-Catalyzed Growth of Vertically Aligned InN Nanorods by Metal-Organic Vapor Phase Epitaxy.

    PubMed

    Tessarek, C; Fladischer, S; Dieker, C; Sarau, G; Hoffmann, B; Bashouti, M; Göbelt, M; Heilmann, M; Latzel, M; Butzen, E; Figge, S; Gust, A; Höflich, K; Feichtner, T; Büchele, M; Schwarzburg, K; Spiecker, E; Christiansen, S

    2016-06-01

    Vertically aligned hexagonal InN nanorods were grown mask-free by conventional metal-organic vapor phase epitaxy without any foreign catalyst. The In droplets on top of the nanorods indicate a self-catalytic vapor-liquid-solid growth mode. A systematic study on important growth parameters has been carried out for the optimization of nanorod morphology. The nanorod N-polarity, induced by high temperature nitridation of the sapphire substrate, is necessary to achieve vertical growth. Hydrogen, usually inapplicable during InN growth due to formation of metallic indium, and silane are needed to enhance the aspect ratio and to reduce parasitic deposition beside the nanorods on the sapphire surface. The results reveal many similarities between InN and GaN nanorod growth showing that the process despite the large difference in growth temperature is similar. Transmission electron microscopy, spatially resolved energy-dispersive X-ray spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and Raman spectroscopy have been performed to analyze the structural properties. Spatially resolved cathodoluminescence investigations are carried out to verify the optical activity of the InN nanorods. The InN nanorods are expected to be the material of choice for high-efficiency hot carrier solar cells. PMID:27187840

  18. Alignment of nanoparticles, nanorods, and nanowires during chemical vapor deposition of silicon

    NASA Astrophysics Data System (ADS)

    Swain, Bhabani Sankar; Park, Jin-Woo; Yang, Seung-Min; Mahmood, Khalid; Swain, Bibhu Prasad; Lee, Jae-Gab; Hwang, Nong-Moon

    2015-09-01

    We fabricated silicon nanostructures (Si-NSs) on SiO x /Si substrate in chemical vapor deposition. During the synthesis of Si-NSs, Si sunflower-shaped structures of one to hundred microns were observed, therein the nanoparticles (NPs), nanowires, and nanorods were aligned in an ordered manner. We suggest that the NSs reported here are evolved by the electrostatic force exerted by charged NPs in gas phase. This NS would help in understanding the role of spontaneous charging of NPs in the gas phase and the role of charged NPs in the gas phase for NSs growth.

  19. Hierarchical ZnO Nanosheet-Nanorod Architectures for Fabrication of Poly(3-hexylthiophene)/ZnO Hybrid NO2 Sensor.

    PubMed

    Wang, Jing; Li, Xian; Xia, Yi; Komarneni, Sridhar; Chen, Haoyuan; Xu, Jianlong; Xiang, Lan; Xie, Dan

    2016-04-01

    A facile one-step solution method has been developed here to fabricate hierarchical ZnO nanosheet-nanorod architectures for compositing with poly(3-hexylthiophene) (P3HT) for fabricating a hybrid NO2 sensor. The hierarchical ZnO nanosheet-nanorod architectures were controllably synthesized by aging the solutions containing 0.05 mol·L(-1) Zn(2+) and 0.33 mol·L(-1) OH(-) at 60 °C through a metastable phase-directed mechanism. The concentration of OH(-) played a huge role on the morphology evolution. When the [OH(-)] concentration was decreased from 0.5 to 0.3 mol·L(-1), the morphology of the ZnO nanostructures changed gradually from monodispersed nanorods (NR) to nanorod assemblies (NRA), and then to nanosheet-nanorod architectures (NS-NR) and nanosheet assemblies (NSA), depending on the formation of various metastable, intermediate phases. The formation of NS-NR included the initial formation of ZnO nanosheets/γ-Zn(OH)2 mixed intermediates, followed by the dissolution of Zn(OH)2, which served as soluble zinc source. Soluble Zn(OH)2 facilitated the dislocation-driven secondary growth of ZnO nanorod arrays on the primary defect-rich nanosheet substrates. Hybrid sensors based on composite films composed of P3HT and the as-prepared ZnO nanostructures were fabricated for the detection of NO2 at room temperature. The P3HT/ZnO NS-NR bilayer film exhibited not only the highest sensitivity but also good reproducibility and selectivity to NO2 at room temperature. The enhanced sensing performance was attributed to the formation of the P3HT/ZnO heterojunction in addition to the enhanced adsorption of NO2 by NS-NR ZnO rich in oxygen-vacancy defects. PMID:26975549

  20. Texture evolution of vertically aligned biaxial tungsten nanorods using RHEED surface pole figure technique

    NASA Astrophysics Data System (ADS)

    Krishnan, R.; Liu, Y.; Gaire, C.; Chen, L.; Wang, G.-C.; Lu, T.-M.

    2010-08-01

    Vertically aligned biaxial tungsten nanorods with cubic A15 crystal structure were deposited by DC magnetron sputtering on native oxide covered Si(100) substrates with glancing angle flux incidence (θ ~ 85°) and a two-step substrate rotation mode at room temperature. These vertical nanorods were grown to different thicknesses (10, 25, 50 and 100 nm) and analyzed for biaxial texture evolution using a highly surface sensitive reflection high-energy electron diffraction (RHEED) pole figure technique. The initial polycrystalline film begins to show the inception of biaxial texture with a fiber background between 10 and 25 nm. Biaxial texture development is eventually completed between 50 and 100 nm thicknesses of the film. The out-of-plane crystallographic direction is [002] and the in-plane texture is selected so as to obtain maximum capture area. In a comparison with 100 nm thick inclined tungsten nanorods deposited at 85° without substrate rotation, it is found that the selection of in-plane texture does not maintain maximum in-plane capture area. This anomalous behavior is observed when the [002] texture axis is tilted ~ 17° from the substrate normal in the direction towards the glancing incident flux.

  1. Texture evolution of vertically aligned biaxial tungsten nanorods using RHEED surface pole figure technique.

    PubMed

    Krishnan, R; Liu, Y; Gaire, C; Chen, L; Wang, G-C; Lu, T-M

    2010-08-13

    Vertically aligned biaxial tungsten nanorods with cubic A15 crystal structure were deposited by DC magnetron sputtering on native oxide covered Si(100) substrates with glancing angle flux incidence (theta approximately 85 degrees) and a two-step substrate rotation mode at room temperature. These vertical nanorods were grown to different thicknesses (10, 25, 50 and 100 nm) and analyzed for biaxial texture evolution using a highly surface sensitive reflection high-energy electron diffraction (RHEED) pole figure technique. The initial polycrystalline film begins to show the inception of biaxial texture with a fiber background between 10 and 25 nm. Biaxial texture development is eventually completed between 50 and 100 nm thicknesses of the film. The out-of-plane crystallographic direction is [002] and the in-plane texture is selected so as to obtain maximum capture area. In a comparison with 100 nm thick inclined tungsten nanorods deposited at 85 degrees without substrate rotation, it is found that the selection of in-plane texture does not maintain maximum in-plane capture area. This anomalous behavior is observed when the [002] texture axis is tilted approximately 17 degrees from the substrate normal in the direction towards the glancing incident flux. PMID:20639581

  2. Annealing effects on the optical and morphological properties of ZnO nanorods on AZO substrate by using aqueous solution method at low temperature

    PubMed Central

    2014-01-01

    Vertically aligned ZnO nanorods (NRs) on aluminum-doped zinc oxide (AZO) substrates were fabricated by a single-step aqueous solution method at low temperature. In order to optimize optical quality, the effects of annealing on optical and structural properties were investigated by scanning electron microscopy, X-ray diffraction, photoluminescence (PL), and Raman spectroscopy. We found that the annealing temperature strongly affects both the near-band-edge (NBE) and visible (defect-related) emissions. The best characteristics have been obtained by employing annealing at 400°C in air for 2 h, bringing about a sharp and intense NBE emission. The defect-related recombinations were also suppressed effectively. However, the enhancement decreases with higher annealing temperature and prolonged annealing. PL study indicates that the NBE emission is dominated by radiative recombination associated with hydrogen donors. Thus, the enhancement of NBE is due to the activation of radiative recombinations associated with hydrogen donors. On the other hand, the reduction of visible emission is mainly attributed to the annihilation of OH groups. Our results provide insight to comprehend annealing effects and an effective way to improve optical properties of low-temperature-grown ZnO NRs for future facile device applications. PMID:25520589

  3. Improved Light Extraction Efficiency in Blue Light-Emitting Diodes by SiO2-Coated ZnO Nanorod Arrays

    NASA Astrophysics Data System (ADS)

    Cho, Chu-Young; Kim, Na-Yeong; Kang, Jang-Won; Leem, Young-Chul; Hong, Sang-Hyun; Lim, Wantae; Kim, Sung-Tae; Park, Seong-Ju

    2013-04-01

    We report on the improved light extraction efficiency of blue light-emitting diodes (LEDs) by SiO2-coated ZnO nanorods (NRs) grown on indium-tin oxide (ITO). The optical output power of the LEDs with SiO2-coated ZnO NRs, which are grown on the patterned sapphire substrates, increases by 5% at 20 mA, compared with that of LEDs with bare ZnO NRs. This increase is attributed to the improved light extraction efficiency of LEDs because the SiO2 layer with a refractive index lower than that of ZnO NRs further reduces the Fresnel reflection.

  4. Highly-sensitive cholesterol biosensor based on platinum-gold hybrid functionalized ZnO nanorods.

    PubMed

    Wang, Chengyan; Tan, Xingrong; Chen, Shihong; Yuan, Ruo; Hu, Fangxin; Yuan, Dehua; Xiang, Yun

    2012-05-30

    A novel scheme for the fabrication of gold/platinum hybrid functionalized ZnO nanorods (Pt-Au@ZnONRs) and multiwalled carbon nanotubes (MWCNTs) modified electrode is presented and its application for cholesterol biosensor is investigated. Firstly, Pt-Au@ZnONRs was prepared by the method of chemical synthesis. Then, the Pt-Au@ZnONRs suspension was dropped on the MWCNTs modified glass carbon electrode, and followed with cholesterol oxidase (ChOx) immobilization by the adsorbing interaction between the nano-material and ChOx as well as the electrostatic interaction between ZnONRs and ChOx molecules. The combination of MWCNTs and Pt-Au@ZnONRs provided a favorable environment for ChOx and resulted in the enhanced analytical response of the biosensor. The resulted biosensor exhibited a linear response to cholesterol in the wide range of 0.1-759.3 μM with a low detection limit of 0.03 μM and a high sensitivity of 26.8 μA mM(-1). The calculated apparent Michaelis constant K(M)(app) was 1.84 mM, indicating a high affinity between ChOx and cholesterol. PMID:22608446

  5. Fabrication and characterization of soluble soybean polysaccharide and nanorod-rich ZnO bionanocomposite.

    PubMed

    Akbariazam, Maryam; Ahmadi, Mohammad; Javadian, Neda; Mohammadi Nafchi, Abdorreza

    2016-08-01

    In this study, a novel bionanocomposite film was prepared by the casting method. Different concentrations [i.e., 0%, 1%, 2%, and 4% (w/w)] of nanorod-rich ZnO (ZnO-nr) were incorporated into soluble soybean polysaccharide (SSPS). The mechanical, thermophysical, antimicrobial, and barrier properties of the resultant bionanocomposite films were evaluated. Incorporation of 4% ZnO-nr into the SSPS matrix reduced water vapor permeability from 8.19×10(-11) to 5.25×10(-11) (gm(-1)s(-1)Pa(-1)) and oxygen permeability from 223 to 127(cm(3)μmm(-2)day(-1)atm(-1)). The elongation at break and heat seal strength of the films increased by over 20%. The moisture content, glass transition temperature, and tensile strength of the SSPS films significantly decreased by ZnO-nr incorporation. SSPS/ZnO-nr (4%) films showed 0% UV transmittance and were able to absorb over 70% of the near-infrared spectrum. The SSPS/ZnO-nr films exhibited excellent antimicrobial activity against Escherichia coli and Staphylococcus aureus. In summary, ZnO-nr is an excellent potential filler for SSPS-based films used as packaging materials. PMID:27151666

  6. Structure of ZnO Nanorods using X-ray Diffraction

    SciTech Connect

    Howdyshell, Marci; /Albion Coll. /SLAC

    2007-11-07

    Many properties of zinc oxide, including wide bandgap semiconductivity, photoconductivity, and chemical sensing, make it a very promising material for areas such as optoelectronics and sensors. This research involves analysis of the formation, or nucleation, of zinc oxide by electrochemical deposition in order to gain a better understanding of the effect of different controlled parameters on the subsequently formed nanostructures. Electrochemical deposition involves the application of a potential to an electrolytic solution containing the species of interest, which causes the ions within to precipitate on one of the electrodes. While there are other ways of forming zinc oxide, this particular process is done at relatively low temperatures, and with the high amount of x-ray flux available at SSRL it is possible to observe such nucleation in situ. Additionally, several parameters can be controlled using the x-ray synchrotron; the concentration of Zn{sup 2+} and the potential applied were controlled during this project. The research involved both gathering the X-ray diffraction data on SSRL beamline 11-3, and analyzing it using fit2d, Origin 6.0 and Microsoft Excel. A time series showed that both the in-plane and out-of-plane components of the ZnO nanorods grew steadily at approximately the same rate throughout deposition. Additionally, analysis of post-scans showed that as potential goes from less negative to more negative, the resulting nanostructures become more oriented.

  7. Structural, optical and magnetic properties of Co-doped ZnO nanorods with hidden secondary phases.

    PubMed

    Wang, Xuefeng; Zheng, Rongkun; Liu, Zongwen; Ho, Ho-Pui; Xu, Jianbin; Ringer, Simon P

    2008-11-12

    Co-doped ZnO nanorods (composition: Zn(0.955)Co(0.045)O) were grown by a simple surfactant-assisted hydrothermal technique. The morphological, structural, optical and magnetic properties of the as-prepared nanorods were investigated by means of scanning electron microscopy, high-resolution transmission electron microscopy, x-ray diffraction, x-ray photoelectron spectroscopy, micro-Raman spectroscopy, micro-cathodoluminescence, and vibrating sample magnetometry (VSM). The results showed that the sample had rod-like morphology and that the preferential growth direction was along the c axis. While Co was successfully doped into the ZnO wurtzite lattice structure as revealed by several characterization techniques, hidden secondary phases of Zn(y)Co(3-y)O(4) (0≤y≤1) were also clearly detected by the micro-Raman spectroscopic technique. We propose that the predominant diffusion-limited Ostwald ripening crystal growth mechanism under the hydrothermal coarsening yielded such phase segregation. VSM results showed that the nanorods displayed relatively weak room-temperature ferromagnetism. We suggest that the origin of the ferromagnetism is probably due to the presence of the mixed cation valence of Co via a d-d double-exchange mechanism rather than the real doping effect. It is essential to control the crystal growth mechanism and defect states associated with the ferromagnetism in order to realize the intrinsic diluted magnetic semiconductors. PMID:21832791

  8. Growth of ZnO nanorod arrays by sol-gel method: transition from two-dimensional film to one-dimensional nanostructure

    NASA Astrophysics Data System (ADS)

    Zhu, M. W.; Huang, N.; Gong, J.; Zhang, B.; Wang, Z. J.; Sun, C.; Jiang, X.

    2011-04-01

    ZnO nanorod arrays were prepared by a sol-gel method in the present work. The effects of doping concentration and annealing time on the morphologies of ZnO:Al (ZAO) layers were investigated to clearly explore the growth process of ZnO nanorods by designing gradient structures and adjusting the annealing time. The results show that the doping level in the films is a key factor for the formation of nanorods and they cannot form at a low doping level. Out-of-plane anisotropic grain growth instead of the traditional in-plane coarsening process is observed with increasing annealing time. The growth model of nanorods is proposed in terms of the surface diffusion and Ehrlich-Schwoebel barrier (ES barrier) theory.

  9. Plasmon-Enhanced Upconversion Luminescence on Vertically Aligned Gold Nanorod Monolayer Supercrystals.

    PubMed

    Yin, Ze; Zhou, Donglei; Xu, Wen; Cui, Shaobo; Chen, Xu; Wang, He; Xu, Shihan; Song, Hongwei

    2016-05-11

    Upconversion nanophosphor is attracting worldwide interests owing to its unique optical properties and great application potentials. However, it is still a great challenge to effectively improve the efficiency/strength of upconversion nanophosphor. Plasmonic modulation is a promising way to solve this bottleneck. In this work, we present a simple yet versatile concept on magnifying upconversion luminescence of NaYF4:Yb(3+), Er(3+) nanocrystals through local field manipulation of surface plasmon. Gold nanorods were directionally assembled into a vertically aligned monolayer supercrystals over large areas. The FDTD simulation indicates that the electromagnetic field strength |E|(2) can be improved about 113 folds at the hot spots of monolayer supercrystals. After optimization, on the surface of the vertically aligned monolayer supercrystals, the overall upconversion luminescence intensity of NaYF4:Yb(3+), Er(3+) under 980 nm excitation was improved more than 35 fold. PMID:27111717

  10. Effect of self-organization, defects, impurities, and autocatalytic processes on the parameters of ZnO films and nanorods

    SciTech Connect

    Mezdrogina, M. M. Eremenko, M. V.; Levitskii, V. S.; Petrov, V. N.; Terukov, E. I.; Kaidashev, E. M.; Langusov, N. V.

    2015-11-15

    The effects of the parameters of ZnO-film deposition onto different substrates using the method of ac magnetron sputtering in a gas mixture of argon and oxygen hare studied. The phenomenon of self-organization is observed, which leads to invariability of the surface morphology of the ZnO films upon a variation in the substrate materials and deposition parameters. The parameters of the macro- and micro-photoluminescence spectra of the films differ insignificantly from the parameters of the photoluminescence spectra of bulk ZnO crystals obtained by the method of hydrothermal growth. The presence of intense emission with a narrow full-width at half-maximum (FWHM) in different regions of the spectrum allows ZnO films obtained by magnetron sputtering doped with rare-earth metal impurities (REIs) to be considered as a promising material for the creation of optoelectronic devices working in a broad spectral range. The possibility of the implementation of magnetic ordering upon legierung with REIs significantly broadens the functional possibilities of ZnO films. The parameters of the photoluminescence spectra of ZnO nanorods are determined by their geometrical parameters and by the concentration and type of the impurities introduced.

  11. Fabrication of Vertically Aligned Carbon Nanotube or Zinc Oxide Nanorod Arrays for Optical Diffraction Gratings.

    PubMed

    Kim, Jeong; Kim, Sun Il; Cho, Seong-Ho; Hwang, Sungwoo; Lee, Young Hee; Hur, Jaehyun

    2015-11-01

    We report on new fabrication methods for a transparent, hierarchical, and patterned electrode comprised of either carbon nanotubes or zinc oxide nanorods. Vertically aligned carbon nanotubes or zinc oxide nanorod arrays were fabricated by either chemical vapor deposition or hydrothermal growth, in combination with photolithography. A transparent conductive graphene layer or zinc oxide seed layer was employed as the transparent electrode. On the patterned surface defined using photoresist, the vertically grown carbon nanotubes or zinc oxides could produce a concentrated electric field under applied DC voltage. This periodic electric field was used to align liquid crystal molecules in localized areas within the optical cell, effectively modulating the refractive index. Depending on the material and morphology of these patterned electrodes, the diffraction efficiency presented different behavior. From this study, we established the relationship between the hierarchical structure of the different electrodes and their efficiency for modulating the refractive index. We believe that this study will pave a new path for future optoelectronic applications. PMID:26726580

  12. Zinc oxide nanorods

    NASA Astrophysics Data System (ADS)

    Chik, Hope Wuming

    Non-lithographic, bottom-up techniques have been developed to advance the state of the art and contribute to the development of new material structures, fabrication methods, devices, and applications using the Zinc Oxide material system as a demonstration vehicle. The novel low temperature catalytic vapour-liquid-solid growth process developed is technologically simple, inexpensive, and a robust fabrication technique offering complete control over the physical dimensions of the nanorod such as its diameter and length, and over the positioning of the nanorods for site-selective growth. By controlling the distribution of the Au catalysts with the use of a self-organized anodized aluminum oxide nanopore membrane as a template, we have been able to synthesize highly ordered, hexagonally packed, array of ZnO nanorods spanning a large area. These nanorods are single crystal, hexagonally shaped, indicative of the wurtzite structure, and are vertically aligned to the substrate. By pre-patterning the template, arbitrary nanorod patterns can be formed. We have also demonstrated the assembly of the nanorods into functional devices using controlled methods that are less resource intensive, easily scalable, and adaptable to other material systems, without resorting to the manipulation of each individual nanostructures. Examples of these devices include the random network device that exploits the common attributes of the nanorods, and those formed using an external field to control the nanorod orientation. Two and three terminal device measurements show that the as-grown nanorods are n-type doped, and that by controlling the external optical excitation and its test environment, the photoconductivity can be altered dramatically. Self assemble techniques such as the spontaneous formation of nanodendrites into complex networks of interconnects were studied. Controlled formation of interconnects achieved by controlling the placement of the catalyst is demonstrated by growing the

  13. Photoelectrochemical Properties of Vertically Aligned CuInS2 Nanorod Arrays Prepared via Template-Assisted Growth and Transfer.

    PubMed

    Yang, Wooseok; Oh, Yunjung; Kim, Jimin; Kim, Hyunchul; Shin, Hyunjung; Moon, Jooho

    2016-01-13

    Although copper-based chalcopyrite materials such as CuInS2 have been considered promising photocathodes for solar water splitting, the fabrication route for a nanostructure with vertical orientation has not yet been developed. Here, a fabrication route for vertically aligned CuInS2 nanorod arrays from an aqueous solution using anodic aluminum oxide template-assisted growth and transfer is presented. The nanorods exhibit a phase-pure CuInS2 chalcopyrite structure and cathodic photocurrent response without co-catalyst loading. Small particles of CdS and ZnS were conformally decorated onto CuInS2 nanorods using a successive ion layer adsorption and reaction method. With surface modification of CdS/ZnS, the photoelectrochemical properties of CuInS2 nanorod arrays are enhanced via flat-band potential shift, as determined by analyses of onset potential and Mott-Schottky plots. PMID:26645722

  14. Single and multi-layered core-shell structures based on ZnO nanorods obtained by aerosol assisted chemical vapor deposition

    SciTech Connect

    Sáenz-Trevizo, A.; Amézaga-Madrid, P.; Pizá-Ruiz, P.; Antúnez-Flores, W.; Ornelas-Gutiérrez, C.; Miki-Yoshida, M.

    2015-07-15

    Core–shell nanorod structures were prepared by a sequential synthesis using an aerosol assisted chemical vapor deposition technique. Several samples consisting of ZnO nanorods were initially grown over TiO{sub 2} film-coated borosilicate glass substrates, following the synthesis conditions reported elsewhere. Later on, a uniform layer consisting of individual Al, Ni, Ti or Fe oxides was grown onto ZnO nanorod samples forming the so-called single MO{sub x}/ZnO nanorod core–shell structures, where MO{sub x} was the metal oxide shell. Additionally, a three-layer core–shell sample was developed by growing Fe, Ti and Fe oxides alternately, onto the ZnO nanorods. The microstructure of the core–shell materials was characterized by grazing incidence X-ray diffraction, scanning and transmission electron microscopy. Energy dispersive X-ray spectroscopy was employed to corroborate the formation of different metal oxides. X-ray diffraction outcomes for single core–shell structures showed solely the presence of ZnO as wurtzite and TiO{sub 2} as anatase. For the multi-layered shell sample, the existence of Fe{sub 2}O{sub 3} as hematite was also detected. Morphological observations suggested the existence of an outer material grown onto the nanorods and further microstructural analysis by HR-STEM confirmed the development of core–shell structures in all cases. These studies also showed that the individual Al, Fe, Ni and Ti oxide layers are amorphous; an observation that matched with X-ray diffraction analysis where no apparent extra oxides were detected. For the multi-layered sample, the development of a shell consisting of three different oxide layers onto the nanorods was found. Overall results showed that no alteration in the primary ZnO core was produced during the growth of the shells, indicating that the deposition technique used herein was and it is suitable for the synthesis of homogeneous and complex nanomaterials high in quality and purity. In addition

  15. Fe solubility, growth mechanism, and luminescence of Fe doped ZnO nanowires and nanorods grown by evaporation-deposition

    NASA Astrophysics Data System (ADS)

    Alemán, Belén; Ortega, Yanicet; García, José Ángel; Fernández, Paloma; Piqueras, Javier

    2011-07-01

    Fe doped ZnO nanowires, nanorods, and urchin-like nanostructures have been grown using an evaporation-deposition method with compacted mixtures of ZnS and Fe2O3 powders, with different Fe contents as precursors. Treatments at 950 °C under argon flow lead to the growth of iron doped nanowires, nanorods, and other nanostructures on the surface of the compacted sample. The incorporation of iron into the nanostructures has been investigated via energy dispersive spectroscopy as well as by cathodoluminescence in a scanning electron microscope and photoluminescence in an optical microscope. The iron content in the structures is limited to the range of 0.5-0.7 at.% and does not depend on the content in the precursor. Bright and dark field imaging and twist contour analysis via transmission electron microscopy support the possibility of a dislocation driven growth of the nanowires.

  16. Controlled growth of ZnO nanorods on textured silicon wafer and the application for highly effective and recyclable SERS substrate by decorating Ag nanoparticles

    SciTech Connect

    Tao, Q.; Li, S.; Zhang, Q.Y. Kang, D.W.; Yang, J.S.; Qiu, W.W.; Liu, K.

    2014-06-01

    Highlights: • The growth behavior of ZnO nanorods (NRs) is studied on the textured Si wafer. • A new surface-enhanced Raman scattering (SERS) substrate has been achieved by assembling Ag nanoparticles onto the ZnO NRs. • The SERS substrate exhibits good performance in terms of high sensitivity, good reproducibility and recyclability. - Abstract: Based on the study of growth behavior of ZnO nanorods on the textured Si wafer, a new three-dimensional surface-enhanced Raman scattering substrate has been achieved by assembling Ag nanoparticles onto the ZnO nanorods to form a radial plasmonic nanostructure. It is found that the new substrate exhibits good performance in terms of high sensitivity and good reproducibility for surface-enhanced Raman scattering. The determined enhancement factor is in the order of 10{sup 7} and the Raman spectra exhibit the remarkable consistency with the deviation below 5.0%. Compared to the substrate fabricated with ZnO nanorod array on the flat Si wafer, the new substrates have the higher utility of excitation light. Meanwhile, the new substrate is demonstrated to be recyclable after the irradiation of ultraviolet light.

  17. A comprehensive biosensor integrated with a ZnO nanorod FET array for selective detection of glucose, cholesterol and urea.

    PubMed

    Ahmad, Rafiq; Tripathy, Nirmalya; Park, Jin-Ho; Hahn, Yoon-Bong

    2015-08-01

    We report a novel straightforward approach for simultaneous and highly-selective detection of multi-analytes (i.e. glucose, cholesterol and urea) using an integrated field-effect transistor (i-FET) array biosensor without any interference in each sensor response. Compared to analytically-measured data, performance of the ZnO nanorod based i-FET array biosensor is found to be highly reliable for rapid detection of multi-analytes in mice blood, and serum and blood samples of diabetic dogs. PMID:26111656

  18. Down-conversion photoluminescence sensitizing plasmonic silver nanoparticles on ZnO nanorods to generate hydrogen by water splitting photochemistry

    SciTech Connect

    Kung, Po-Yen; Huang, Li-Wen; Shen, Tin-Wei; Wang, Wen-Lin; Su, Yen-Hsun; Lin, Melody I.

    2015-01-12

    Silver nanoparticles fabricated onto the surface of the ZnO nanorods form the photoanode and generate photoelectric current due to surface plasmon resonance, which serves as anode electrodes in photoelectrochemical hydrogen production. In order to increase the absorption spectrum of photoanode, organic pigments were utilized as photo-sensitizers to generate down-conversion photoluminescence to excite surface plasmon resonances of silver nanoparticles. The way of using light to carry the energy in electronic scattering regime runs the system for the enhancement of solar water splitting efficiency. It was significantly tuned in environmentally sustainable applications for power generation and development of alternative energy.

  19. Down-conversion photoluminescence sensitizing plasmonic silver nanoparticles on ZnO nanorods to generate hydrogen by water splitting photochemistry

    NASA Astrophysics Data System (ADS)

    Kung, Po-Yen; Huang, Li-Wen; Shen, Tin-Wei; Wang, Wen-Lin; Su, Yen-Hsun; Lin, Melody I.

    2015-01-01

    Silver nanoparticles fabricated onto the surface of the ZnO nanorods form the photoanode and generate photoelectric current due to surface plasmon resonance, which serves as anode electrodes in photoelectrochemical hydrogen production. In order to increase the absorption spectrum of photoanode, organic pigments were utilized as photo-sensitizers to generate down-conversion photoluminescence to excite surface plasmon resonances of silver nanoparticles. The way of using light to carry the energy in electronic scattering regime runs the system for the enhancement of solar water splitting efficiency. It was significantly tuned in environmentally sustainable applications for power generation and development of alternative energy.

  20. Highly Transparent and UV-Resistant Superhydrophobic SiO2-Coated ZnO Nanorod Arrays

    PubMed Central

    2015-01-01

    Highly transparent and UV-resistant superhydrophobic arrays of SiO2-coated ZnO nanorods are prepared in a sequence of low-temperature (<150 °C) steps on both glass and thin sheets of PET (2 × 2 in.2), and the superhydrophobic nanocomposite is shown to have minimal impact on solar cell device performance under AM1.5G illumination. Flexible plastics can serve as front cell and backing materials in the manufacture of flexible displays and solar cells. PMID:24495100

  1. Ultraviolet photodetectors based on ZnO nanorods-seed layer effect and metal oxide modifying layer effect

    NASA Astrophysics Data System (ADS)

    Zhou, Hai; Fang, Guojia; Liu, Nishuang; Zhao, Xingzhong

    2011-12-01

    Pt/ZnO nanorod (NR) and Pt/modified ZnO NR Schottky barrier ultraviolet (UV) photodetectors (PDs) were prepared with different seed layers and metal oxide modifying layer materials. In this paper, we discussed the effect of metal oxide modifying layer on the performance of UV PDs pre- and post-deposition annealing at 300°C, respectively. For Schottky barrier UV PDs with different seed layers, the MgZnO seed layer-PDs without metal oxide coating showed bigger responsivity and larger detectivity ( D λ*) than those of PDs with ZnO seed layer, and the reason was illustrated through energy band theory and the electron transport mechanism. Also the ratio of D 254* to D 546* was calculated above 8 × 102 for all PDs, which demonstrated that our PDs showed high selectivity for detecting UV light with less influence of light with long wavelength.

  2. Hexagonal core-shell and alloy Au/Ag nanodisks on ZnO nanorods and their optical enhancement effect

    PubMed Central

    2014-01-01

    Au and Ag hybrid hexagonal nanodisks were synthesized on ZnO nanorods' (0002) surface via a new two-step deposition-annealing method. The structural, compositional, as well as optical investigations were carried out systematically to find out the nanodisks' formation mechanism and optical enhancement effect. It was shown that the core-shell Au/Ag nanodisk can be formed under rapid annealing temperature of 500°C, while Au/Ag alloy nanodisks are formed if higher temperatures (>550°C) are applied. The optical effect from these nanodisks was studied through photoluminescence and absorption spectroscopy. It was found that the carrier-plasmon coupling together and carrier transfer between metal and ZnO contribute to the emission enhancement. Furthermore, the results suggest that the composition of nanodisk on the vicinity of metal/ZnO interface plays an important role in terms of the enhancement factors. PMID:24936157

  3. Enhanced UV photosensitivity from rapid thermal annealed vertically aligned ZnO nanowires

    PubMed Central

    2011-01-01

    We report on the major improvement in UV photosensitivity and faster photoresponse from vertically aligned ZnO nanowires (NWs) by means of rapid thermal annealing (RTA). The ZnO NWs were grown by vapor-liquid-solid method and subsequently RTA treated at 700°C and 800°C for 120 s. The UV photosensitivity (photo-to-dark current ratio) is 4.5 × 103 for the as-grown NWs and after RTA treatment it is enhanced by a factor of five. The photocurrent (PC) spectra of the as-grown and RTA-treated NWs show a strong peak in the UV region and two other relatively weak peaks in the visible region. The photoresponse measurement shows a bi-exponential growth and bi-exponential decay of the PC from as-grown as well as RTA-treated ZnO NWs. The growth and decay time constants are reduced after the RTA treatment indicating a faster photoresponse. The dark current-voltage characteristics clearly show the presence of surface defects-related trap centers on the as-grown ZnO NWs and after RTA treatment it is significantly reduced. The RTA processing diminishes the surface defect-related trap centers and modifies the surface of the ZnO NWs, resulting in enhanced PC and faster photoresponse. These results demonstrated the effectiveness of RTA processing for achieving improved photosensitivity of ZnO NWs. PMID:21859456

  4. Novel ALD-assisted growth of ZnO nanorods on graphene and its Cu2ZnSn(S(x)Se(1-x))4 solar cell application.

    PubMed

    Jiao, Kejia; Wu, Xiaofeng; Duan, ChunYang; Zhang, Dangwen; Wang, Yu; Chen, Yunfa

    2015-02-14

    The hydrothermal growth of ZnO nanorods on graphene draws a specific interest for the advantages of low-temperature processability over a large area and low cost, but challenges still remain in directly growing uniform ZnO seed layers on pristine graphene without impairing its beneficial properties. In this work, the direct growth of ZnO seed layers on graphene via H2O-based atomic layer deposition (ALD) has been investigated. It is found that uniform ZnO thin films can be deposited on graphene via ALD using a combination of single-layer graphene/Cu stacks as substrates and a facile pre-H2O treatment process. After growing ZnO nanorods on graphene, its photovoltaic application in a Cu2ZnSn(SxSe1-x)4 (CZTSSe) solar cell is demonstrated. The performance of graphene-based cells approaches that of ITO-based cells with similar architectures, highlighting that graphene is a potential replacement for ITO in optoelectronic devices. The method reported herein for fabricating ZnO nanorods on graphene using ALD-ZnO as seed layers preserves its properties, and is thus applicable to a wide variety of graphene-based nanoelectronic devices. PMID:25589409

  5. Adopting Novel Strategies in Achieving High-Performance Single-Layer Network Structured ZnO Nanorods Thin Film Transistors.

    PubMed

    Park, Ji-Hyeon; Park, Jee Ho; Biswas, Pranab; Kwon, Do Kyun; Han, Sun Woong; Baik, Hong Koo; Myoung, Jae-Min

    2016-05-11

    High-performance, solution-processed transparent and flexible zinc oxide (ZnO) nanorods (NRs)-based single layer network structured thin film transistors (TFTs) were developed on polyethylene terephthalate (PET) substrate at 100 °C. Keeping the process-temperature under 100 °C, we have improved the device performance by introducing three low temperature-based techniques; regrowing ZnO to fill the void spaces in a single layer network of ZnO NRs, passivating the back channel with polymer, and adopting ZrO2 as the high-k dielectric. Notably, high-k amorphous ZrO2 was synthesized and deposited using a novel method at an unprecedented temperature of 100 °C. Using these methods, the TFTs exhibited a high mobility of 1.77 cm(2)/V·s. An insignificant reduction of 2.18% in mobility value after 3000 cycles of dynamic bending at a radius of curvature of 20 mm indicated the robust mechanical nature of the flexible ZnO NRs SLNS TFTs. PMID:27096706

  6. Synergistic effect of dual interfacial modifications with room-temperature-grown epitaxial ZnO and adsorbed indoline dye for ZnO nanorod array/P3HT hybrid solar cell.

    PubMed

    Chen, Dian-Wei; Wang, Ting-Chung; Liao, Wen-Pin; Wu, Jih-Jen

    2013-09-11

    ZnO nanorod (NR)/poly(3-hexylthiophene) (P3HT) hybrid solar cells with interfacial modifications are investigated in this work. The ZnO NR arrays are modified with room-temperature (RT)-grown epitaxial ZnO shells or/and D149 dye molecules prior to the P3HT infiltration. A synergistic effect of the dual modifications on the efficiency of the ZnO NR/P3HT solar cell is observed. The open-circuit voltage and fill factor are considerable improved through the RT-grown ZnO and D149 modifications in sequence on the ZnO NR array, which brings about a 2-fold enhancement of the efficiency of the ZnO NR/P3HT solar cell. We suggested that the more suitable surface of RT-grown ZnO for D149 adsorption, the chemical compatibility of D149 and P3HT, and the elevated conduction band edge of the RT-grown ZnO/D149-modified ZnO NR array construct the superior interfacial morphology and energetics in the RT-grown ZnO/D149-modified ZnO NR/P3HT hybrid solar cell, resulting in the synergistic effect on the cell efficiency. An efficiency of 1.16% is obtained in the RT-grown ZnO/D149-modified ZnO NR/P3HT solar cell. PMID:23937447

  7. Dendrite-free lithium deposition with self-aligned nanorod structure.

    PubMed

    Zhang, Yaohui; Qian, Jiangfeng; Xu, Wu; Russell, Selena M; Chen, Xilin; Nasybulin, Eduard; Bhattacharya, Priyanka; Engelhard, Mark H; Mei, Donghai; Cao, Ruiguo; Ding, Fei; Cresce, Arthur V; Xu, Kang; Zhang, Ji-Guang

    2014-12-10

    Suppressing lithium (Li) dendrite growth is one of the most critical challenges for the development of Li metal batteries. Here, we report for the first time the growth of dendrite-free lithium films with a self-aligned and highly compacted nanorod structure when the film was deposited in the electrolyte consisting of 1.0 M LiPF6 in propylene carbonate with 0.05 M CsPF6 as an additive. Evolution of both the surface and the cross-sectional morphologies of the Li films during repeated Li deposition/stripping processes were systematically investigated. It is found that the formation of the compact Li nanorod structure is preceded by a solid electrolyte interphase (SEI) layer formed on the surface of the substrate. Electrochemical analysis indicates that an initial reduction process occurred at ∼ 2.05 V vs Li/Li(+) before Li deposition is responsible for the formation of the initial SEI, while the X-ray photoelectron spectroscopy indicates that the presence of CsPF6 additive can largely enhance the formation of LiF in this initial SEI. Hence, the smooth Li deposition in Cs(+)-containing electrolyte is the result of a synergistic effect of Cs(+) additive and preformed SEI layer. A fundamental understanding on the composition, internal structure, and evolution of Li metal films may lead to new approaches to stabilize the long-term cycling stability of Li metal and other metal anodes for energy storage applications. PMID:25419865

  8. Piezoelectric nanogenerator based on zinc oxide nanorods grown on textile cotton fabric

    NASA Astrophysics Data System (ADS)

    Khan, Azam; Ali Abbasi, Mazhar; Hussain, Mushtaque; Hussain Ibupoto, Zafar; Wissting, Jonas; Nur, Omer; Willander, Magnus

    2012-11-01

    This investigation explores piezoelectricity generation from ZnO nanorods, which were grown on silver coated textile cotton fabrics using the low temperature aqueous chemical growth method. The morphology and crystal structure studies were carried out by x-ray diffraction, scanning electron microscopic and high resolution transmission electron microscopic techniques, respectively. ZnO nanorods were highly dense, well aligned, uniform in spatial distribution and exhibited good crystal quality. The generation of piezoelectricity from fabricated ZnO nanorods grown on textile cotton fabrics was measured using contact mode atomic force microscopy. The average output voltage generated from ZnO nanorods was measured to be around 9.5 mV. This investigation is an important achievement regarding the piezoelectricity generation on textile cotton fabric substrate. The fabrication of this device provides an alternative approach for a flexible substrate to develop devices for energy harvesting and optoelectronic technology on textiles.

  9. Structural and optical properties of highly crystalline Ce, Eu and co-doped ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Murugadoss, G.; Jayavel, R.; Rajesh Kumar, M.

    2015-06-01

    Different concentrations of europium (Eu), cerium (Ce) doped and co-doped ZnO:Eu (1%), Ce (1%) nanorods were successfully synthesized by chemical method using Polyvinylpyrrolidone as a surfactant. Crystalline phase, morphology, functional groups, optical absorption, emission and thermal properties of prepared samples were investigated by X-ray diffraction (XRD), X-ray photoelectron spectrometer (XPS), Scanning electron microscopy (SEM), High-resolution transmission electron microscopy (HR-TEM), Fourier transform infra-red (FT-IR), UV-visible, Photoluminescence (PL) spectrophotometer and thermogravimetry (TG) and differential thermal analysis (DTA) analysis. The XRD study showed high crystalline nature of the products with nanoscale regime. Optical study showed shifting the absorption and emission spectra toward higher wavelength side when increasing the doping concentrations. Mainly, this is first time observed a red emission peak at 660 nm for Ce (3%) doped ZnO. Additionally, co-doped ZnO:Eu (1%), Ce (1%) nanorods were synthesized and studied their optical properties. This work demonstrates that simply modified their optical absorption and emission of ZnO by introducing rare earth ions can be used as an effective electrode material in solar cell applications, optoelectronic devices and photocatalysis analysis.

  10. Voids, nanochannels and formation of nanotubes with mobile Sn fillings in Sn doped ZnO nanorods.

    PubMed

    Ortega, Y; Dieker, Ch; Jäger, W; Piqueras, J; Fernández, P

    2010-06-01

    ZnO nanorods containing different hollow structures have been grown by a thermal evaporation-deposition method with a mixture of ZnS and SnO(2) powders as precursor. Transmission electron microscopy shows rods with rows of voids as well as rods with empty channels along the growth axis. The presence of Sn nanoprecipitates associated with the empty regions indicates, in addition, that these are generated by diffusion processes during growth, probably due to an inhomogeneous distribution of Sn. The mechanism of forming voids and precipitates appears to be based on diffusion processes similar to the Kirkendall effect, which can lead to void formation at interfaces of bulk materials or in core-shell nanostructures. In some cases the nanorods are ZnO tubes partially filled with Sn that has been found to melt and expand by heating the nanotubes under the microscope electron beam. Such metal-semiconductor nanostructures have potential applications as thermal nanosensors or as electrical nanocomponents. PMID:20453289

  11. Voids, nanochannels and formation of nanotubes with mobile Sn fillings in Sn doped ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Ortega, Y.; Dieker, Ch; Jäger, W.; Piqueras, J.; Fernández, P.

    2010-06-01

    ZnO nanorods containing different hollow structures have been grown by a thermal evaporation-deposition method with a mixture of ZnS and SnO2 powders as precursor. Transmission electron microscopy shows rods with rows of voids as well as rods with empty channels along the growth axis. The presence of Sn nanoprecipitates associated with the empty regions indicates, in addition, that these are generated by diffusion processes during growth, probably due to an inhomogeneous distribution of Sn. The mechanism of forming voids and precipitates appears to be based on diffusion processes similar to the Kirkendall effect, which can lead to void formation at interfaces of bulk materials or in core-shell nanostructures. In some cases the nanorods are ZnO tubes partially filled with Sn that has been found to melt and expand by heating the nanotubes under the microscope electron beam. Such metal-semiconductor nanostructures have potential applications as thermal nanosensors or as electrical nanocomponents.

  12. Hydrogen treatment-improved uniform deposition of Ag nanoparticles on ZnO nanorod arrays and their visible-light photocatalytic and surface-enhanced Raman scattering properties

    PubMed Central

    2013-01-01

    ZnO nanorod arrays were synthesized by chemical bath deposition. After heat treatment in hydrogen or air, Ag nanoparticles were deposited on ZnO nanorod arrays by photo-reduction method. The size of Ag nanoparticles as well as the surface morphology, structure, composition, and optical property of ZnO nanorod arrays before and after the deposition of Ag nanoparticles were characterized by SEM, XRD, EDS, and UV/VIS/NIR spectrophotometer. As compared to the samples with heat treatment in air or without heat treatment, the ZnO nanorod arrays after heat treatment in hydrogen allowed Ag nanoparticles to be deposited more uniformly, densely, and numerously. Also, they exhibited higher efficiency for the visible light-driven photocatalytic degradation of Rhodamine 6G (R6G) dye. The effects of the amount of Ag nanoparticles, initial dye concentration, and temperature on the photocatalytic degradation efficiency were investigated. Furthermore, they also exhibited better surface-enhanced Raman scattering property for the detection of R6G dyes. PMID:23866904

  13. Synthesis and characterization of Si/ZnO coaxial nanorod heterostructure on (100) Si substrate

    NASA Astrophysics Data System (ADS)

    Dong Cho, Hak; Young Cho, Hoon; Wook Kwak, Dong; Won Kang, Tae; Taek Yoon, Im

    2016-03-01

    One-dimensional ZnO nanorods were grown vertically on a (100) Si substrate using a vapor phase transport method. Following the fabrication of ZnO nanorods, Si layers were deposited by rapid thermal chemical vapor deposition (RTCVD) directly on the ZnO nanorod/Si (100) substrate. Field emission scanning electron microscopy revealed that a Si/ZnO nanorod coaxial heterostructure were synthesized vertically oriented along the (002) plane on a Si substrate. X-ray diffraction, Energy dispersive X-ray and Raman spectroscopy revealed that the ZnO nanorods were single crystals with a hexagonal structure, and grew with a c-axis orientation perpendicular to the Si substrate, whereas the Si layer was poly-silicon with cubic structure. These results demonstrated the Si/ZnO nanorod coaxial heterostructure were synthesized successfully on a (100) Si substrate and the ZnO nanorod enables the synthesis of a vertically grown well-aligned Si/ZnO coaxial nanorod heterostructure.

  14. Self-assembly of gold nanorods into vertically aligned, rectangular microplates with a supercrystalline structure

    NASA Astrophysics Data System (ADS)

    Xiao, Junyan; Li, Zhe; Ye, Xiaozhou; Ma, Yurong; Qi, Limin

    2013-12-01

    Vertically aligned, supercrystalline microplates with a well-defined rectangular shape were fabricated in a large area through self-assembly of gold nanorods by a novel bulk solution evaporation method. This evaporative self-assembly strategy involving continuous movement of the contact line can prevent the coffee-ring effect, thus allowing uniform deposition of discrete GNR superstructures over a large area and favoring the formation of GNR supercrystals with geometrically symmetric shapes. A mechanism based on the continuing nucleation and growth of smectic GNR superstructures accompanying the movement of the contact line was put forward for the formation of the unique GNR supercrystal arrays. Based on this mechanism, a micropatterned substrate was designed to control the nucleation location and growth direction, leading to the spontaneous self-assembly of nearly parallel arrays of vertically aligned, supercrystalline microplates of GNRs. The obtained rectangular-plate-shaped GNR supercrystals exhibited interesting anisotropic optical reflection properties, which were revealed by polarized light microscopy.Vertically aligned, supercrystalline microplates with a well-defined rectangular shape were fabricated in a large area through self-assembly of gold nanorods by a novel bulk solution evaporation method. This evaporative self-assembly strategy involving continuous movement of the contact line can prevent the coffee-ring effect, thus allowing uniform deposition of discrete GNR superstructures over a large area and favoring the formation of GNR supercrystals with geometrically symmetric shapes. A mechanism based on the continuing nucleation and growth of smectic GNR superstructures accompanying the movement of the contact line was put forward for the formation of the unique GNR supercrystal arrays. Based on this mechanism, a micropatterned substrate was designed to control the nucleation location and growth direction, leading to the spontaneous self-assembly of

  15. CdS and CdS/CdSe sensitized ZnO nanorod array solar cells prepared by a solution ions exchange process

    SciTech Connect

    Chen, Ling; Gong, Haibo; Zheng, Xiaopeng; Zhu, Min; Zhang, Jun; Yang, Shikuan; Cao, Bingqiang

    2013-10-15

    Graphical abstract: - Highlights: • CdS and CdS/CdSe quantum dots are assembled on ZnO nanorods by ion exchange process. • The CdS/CdSe sensitization of ZnO effectively extends the absorption spectrum. • The performance of ZnO/CdS/CdSe cell is improved by extending absorption spectrum. - Abstract: In this paper, cadmium sulfide (CdS) and cadmium sulfide/cadmium selenide (CdS/CdSe) quantum dots (QDs) are assembled onto ZnO nanorod arrays by a solution ion exchange process for QD-sensitized solar cell application. The morphology, composition and absorption properties of different photoanodes were characterized with scanning electron microscope, transmission electron microscope, energy-dispersive X-ray spectrum and Raman spectrum in detail. It is shown that conformal and uniform CdS and CdS/CdSe shells can grow on ZnO nanorod cores. Quantum dot sensitized solar cells based on ZnO/CdS and ZnO/CdS/CdSe nanocable arrays were assembled with gold counter electrode and polysulfide electrolyte solution. The CdS/CdSe sensitization of ZnO can effectively extend the absorption spectrum up to 650 nm, which has a remarkable impact on the performance of a photovoltaic device by extending the absorption spectrum. Preliminary results show one fourth improvement in solar cell efficiency.

  16. Optical study and ruthenizer (II) N3 dye-sensitized solar cell application of ZnO nanorod-arrays synthesized by combine two-step process

    NASA Astrophysics Data System (ADS)

    Parra, Mohammad Ramzan; Haque, Fozia Z.

    2015-10-01

    Highly dense ZnO nanorod-arrays were successfully synthesized with uniform c-axis growth by using combine two-step process: sol-gel spin coating followed by the aqueous solution growth method. Structural and optical properties of ZnO nanorod-arrays were investigated. The X-ray diffraction results revealed that ZnO nanorod arrays exhibit wurtzite hexagonal crystal structure with a dominant (002) peak with high crystallinity. Nanorods of 3-4 μm length and 500 nm diameter, with surface roughness ˜20 nm were observed. Furthermore, Raman spectroscopic results revealed the presence of E 2 peak ˜438 cm-1 which again corroborated the existence of wurtzite crystal structures assigned to ZnO. The optical transmittance spectrum indicated that the transmittance of more than 80% was observed in the visible and infrared (IR) regions with the optical band-gap energy ˜3.35 eV. Photoluminescence spectrum showed peaks in ultra-violet (382.0 nm) and green region (524.9 nm), which specified good-quality crystallite formation containing high density of surface defects, zinc interstitials and oxygen-vacancies. Ruthenizer (II) N3-dye loaded sensitized solar cell test illustrated that the uniform ZnO nanorod-arrays as working electrode with a short circuit current density of 3.99 mA/cm2, fill factor ˜50% and overall power conversion efficiency (η) ˜1.36% might be a promising electrode material of dye sensitized solar cell application.

  17. Micro-Structural Properties of YBa2Cu3O(7-x)/ZnO Nanorods on SrTiO3.

    PubMed

    Jin, Zhenlan; Park, Changin; Song, Kyu Jeong; Kang, Sukil; Ko, Kyeong-Eun; Park, Chan; Ko, Rock Kil; Han, S W

    2015-01-01

    We examined the local structural and the interfacial properties of YBa2Cu3O(7-x) (YBCO)/ZnO nanorods on SrTiO3 (STO) substrates using various measurements. Vertically aligned ZnO nanorods were synthesized on STO substrates using a catalyst-free metal-organic chemical vapor deposition. YBCO films were deposited ex-situ on the ZnO nanorods/STO templates using a DC magnetron sputtering deposition. X-ray diffraction revealed that the YBCO films were crystallized along their c-axes on the ZnO nanorods/STO templates. Transmission electron microscopy measurements demonstrated that YBCO filled the space between ZnO nanorods and that both interfaces of YBCO/ZnO nanorods and ZnO nanorods/STO were quite clean with no disorder. Polarization-dependent extended X-ray absorption fine structure measurements at the Cu K edge showed extra disorder in the CuO2 planes of YBCO/ZnO nanorods/STO, compared with that of YBCO/STO. The superconductivity transition temperature (T(c)) of YBCO/ZnO nanorods/STO was approximately 50 K whereas that of YBCO/STO was 93 K. The decrease of T(c) of YBCO/ZnO nanorods/STO was ascribed to the structural disorder of CuO2 planes as well as grain boundaries in the YBCO films. PMID:26328417

  18. Self-assembly of gold nanorods into vertically aligned, rectangular microplates with a supercrystalline structure.

    PubMed

    Xiao, Junyan; Li, Zhe; Ye, Xiaozhou; Ma, Yurong; Qi, Limin

    2014-01-21

    Vertically aligned, supercrystalline microplates with a well-defined rectangular shape were fabricated in a large area through self-assembly of gold nanorods by a novel bulk solution evaporation method. This evaporative self-assembly strategy involving continuous movement of the contact line can prevent the coffee-ring effect, thus allowing uniform deposition of discrete GNR superstructures over a large area and favoring the formation of GNR supercrystals with geometrically symmetric shapes. A mechanism based on the continuing nucleation and growth of smectic GNR superstructures accompanying the movement of the contact line was put forward for the formation of the unique GNR supercrystal arrays. Based on this mechanism, a micropatterned substrate was designed to control the nucleation location and growth direction, leading to the spontaneous self-assembly of nearly parallel arrays of vertically aligned, supercrystalline microplates of GNRs. The obtained rectangular-plate-shaped GNR supercrystals exhibited interesting anisotropic optical reflection properties, which were revealed by polarized light microscopy. PMID:24292548

  19. Optimized ferrocene-functionalized ZnO nanorods for signal amplification in electrochemical immunoassay of Escherichia coli.

    PubMed

    Teng, Yingqiao; Zhang, Xinai; Fu, Ying; Liu, Huijie; Wang, Zhongchuan; Jin, Litong; Zhang, Wen

    2011-08-15

    A novel amplified electrochemical immunoassay based on ferrocene (Fc)-functionalized ZnO nanorods (NRs) was developed in the present work. The detection antibody ((d)Ab) and Fc were immobilized onto the surface of ZnO NRs, denoted as {(d)Ab-ZnO-Fc} bioconjugates. The amount of (d)Ab and Fc in the bioconjugates was investigated using the copper reduction/bicinchoninic acid reaction (BCA protein assay) and inductive coupled plasma-atomic emission spectroscopy (ICP-AES), respectively. Greatly amplified signal was achieved in the sandwich-type immunoassay when (d)Ab and Fc linked to ZnO NRs at a proper ratio. Using Escherichia coli (E. coli) as a model antigen, the designed immunoassay showed an excellent analytical performance, and exhibited a wide dynamic response range of E. coli concentration from 10(2) to 10(6)cfu/mL with a detection limit of 50 cfu/mL (S/N=3). By introducing a pre-enrichment step, the detection of 5 cfu/10 mL E. coli in hospital sewage water was realized. This proposed signal amplification strategy was promising and could be easily extended to monitor other biorecognition events. PMID:21733671

  20. Gold nanoparticle immobilization on ZnO nanorods via bi-functional monolayers: A facile method to tune interface properties

    NASA Astrophysics Data System (ADS)

    Jayaraman, Sundaramurthy; Suresh Kumar, P.; Mangalaraj, D.; Dharmarajan, Rajarathnam; Ramakrishna, Seeram; P Srinivasan, M.

    2015-11-01

    We demonstrated the functionalization of one dimensional (1-D) zinc oxide nanorods (ZnO NRs) using bi-functional organic molecules to create hybrid structures with surface functionalities and tuneable organic/inorganic interface. Bi-functional molecules with carboxylic acid, thiol and silane end groups and amine termination had been employed to functionalize the NRs by forming carboxylate, thiolate and hydroxylation bonds, respectively, with ZnO. The surface textures of NRs were preserved even after functionalization. The functionalized NRs were decorated with gold nanoparticles (AuNPs) and the hybrid structures exhibited a quenched blue shift ultraviolet emission which depended on the distance between the ZnO surface and the AuNPs. The NR functionalization with bi-functional molecules and decoration of NPs, and surface morphologies were analyzed using x-ray photoelectron spectroscopy, field emission scanning electron microscopy and transmission electron spectroscopy. These hybrid structures can play a vital role in tuning the interface properties and have potential applications in future photovoltaics, chemical sensors, biomarkers, and wavelength based biosensors.

  1. Supramolecular alignment of gold nanorods via cucurbit[8]uril ternary complex formation

    NASA Astrophysics Data System (ADS)

    Jones, Samuel T.; Zayed, Jameel M.; Scherman, Oren A.

    2013-05-01

    We have shown, for the first time, that a three component system is capable of aligning gold nanorods (AuNRs) through supramolecular host-guest interactions leading to control over AuNR end-to-end assembly. Viologen end-functionalised AuNRs were prepared that were capable of selectively binding to a cucurbit[8]uril (CB[8]) macrocyclic host molecule. These end-functionalised AuNRs could participate in 1 : 1 : 1 ternary complexation with synthesised telechelic linker molecules bearing second guest moieties, in the presence of CB[8]. When the linker length was long and flexible aggregation and precipitation of AuNRs were readily observed, but with no control over the AuNR conformation. On the other hand, when the linker length was shortened thereby imparting a more rigid connection between neighboring gold nanorods, the end-to-end assembly of AuNRs was achieved. We also note that in the presence of a molecule capable of occupying the entirety of the CB[8] cavity, end-to-end assembly is not observed as the system's ability to form a 1 : 1 : 1 ternary complex is halted. Thus, the end-to-end assembly relies upon both having a relatively short and rigid linker as well as the specific, yet tuneable supramolecular 1 : 1 : 1 ternary complexation between the three components.We have shown, for the first time, that a three component system is capable of aligning gold nanorods (AuNRs) through supramolecular host-guest interactions leading to control over AuNR end-to-end assembly. Viologen end-functionalised AuNRs were prepared that were capable of selectively binding to a cucurbit[8]uril (CB[8]) macrocyclic host molecule. These end-functionalised AuNRs could participate in 1 : 1 : 1 ternary complexation with synthesised telechelic linker molecules bearing second guest moieties, in the presence of CB[8]. When the linker length was long and flexible aggregation and precipitation of AuNRs were readily observed, but with no control over the AuNR conformation. On the other hand

  2. Well-aligned carbon nitride nanorods: the template-free synthesis and their optical and thermal properties

    NASA Astrophysics Data System (ADS)

    Zhang, Zhao; Wu, Si; Zhang, Jian; Tang, Shunxi; Hu, Chunyuan; Li, Yingai; Jiang, Lina; Cui, Qiliang

    2015-06-01

    The fabrication and optical properties of well-aligned graphitic carbon nitride nanorods are demonstrated. The growth strategy involves the polycondensation of ballmilled molecular precursors of melamine and cyanuric chloride at programmed temperatures. The compositional and structural characterizations confirm that the prepared samples are polymeric graphitic carbon nitride with high crystallinity. The morphological studies reveal that the prepared samples consist of nanorods aligning nearly in parallel. The photophysical features of the carbon nitride nanorods can be satisfactorily described by the excitation and radiative recombination of molecular excitons. The significantly improved interlayer stacking, as well as the shifting of optical bandgap to higher energies, may be attributed to the general nanosize effect. Due to the overlap of orbitals induced by the delocalization of electrons in the sp 2 clusters with the higher packing density perpendicular to the layers, a wider bandgap is proposed for this peculiar nanoarchitecture. The luminescent nanorods remain thermally stable up to about 500 °C during calcination under atmospheric conditions, indicating their potential applications as sensors and nanoelectronic and optoelectronic devices.

  3. A rapid response time and highly sensitive amperometric glucose biosensor based on ZnO nanorod via citric acid-assisted annealing route

    NASA Astrophysics Data System (ADS)

    Yang, Zao; Ye, Zhizhen; Zhao, Binghui; Zong, Xiaolin; Wang, Ping

    2010-04-01

    ZnO nanorods were synthesized by citric acid-assisted annealing route. In a phosphate buffer solution with a pH value of 7.4, glucose oxidase was immobilized on the surface of ZnO nanorod through chitosan-assisted cross-linking technique. The one-dimensional ZnO nanorods provide a large effective surface area with high surface-to-volume ratio and provide a favorable environment for the immobilization of GO x. The response time of this biosensor is less than 2 s. This biosensor has a very high sensitivity of 25.7 μA cm -2 mM -1. The low detection limit was estimated to be 0.01 mM. Two linear response ranges are 0.01-0.25 mM and 0.3-0.7 mM. The Michaelis-Menten constant is found to be 1.95 mM. These results demonstrate that zinc oxide nanorods have potential applications in biosensors.

  4. Synergistic Effects of a Combination of Cr2O3-Functionalization and UV-Irradiation Techniques on the Ethanol Gas Sensing Performance of ZnO Nanorod Gas Sensors.

    PubMed

    Park, Sunghoon; Sun, Gun-Joo; Jin, Changhyun; Kim, Hyoun Woo; Lee, Sangmin; Lee, Chongmu

    2016-02-01

    There have been very few studies on the effects of combining two or more techniques on the sensing performance of nanostructured sensors. Cr2O3-functionalized ZnO nanorods were synthesized using carbothermal synthesis involving the thermal evaporation of a mixture of ZnO and graphite powders followed by a solvothermal process for Cr2O3-functionalization. The ethanol gas-sensing properties of multinetworked pristine and Cr2O3-functionalized ZnO nanorod sensors under UV illumination were examined to determine the effects of combining Cr2O3-ZnO heterostructure formation and UV irradiation on the gas-sensing properties of ZnO nanorods. The responses of the pristine and Cr2O3-functionalized ZnO nanorod sensors to 200 ppm of ethanol at room temperature by UV illumination at 2.2 mW/cm(2) were increased by 3.8 and 7.7 times, respectively. The Cr2O3-functionalized ZnO nanorod sensor also showed faster response/recovery and better selectivity than those of the pristine ZnO nanorod sensor at the same ethanol concentration. This result suggests that a combination heterostructure formation and UV irradiation had a synergistic effect on the gas-sensing properties of the sensor. The synergistic effect might be attributed to the catalytic activity of Cr2O3 for ethanol oxidation as well as to the increased change in conduction channel width accompanying adsorption and desorption of ethanol under UV illumination due to the presence of Cr2O3 nanoparticles in the Cr2O3-functionalized ZnO nanorod sensor. PMID:26751000

  5. Low-temperature fabrication of ZnO nanorods/ferrocenyl-alkanethiol bilayer electrode and its application for enzymatic glucose detection.

    PubMed

    Ma, Qiang; Nakazato, Kazuo

    2014-01-15

    A novel ZnO nanorods/ferrocenyl-alkanethiol (FcC11SH) bilayer structure was prepared and applied for the fabrication of glucose enzymatic biosensor. ZnO nanorod matrix was synthesized by low temperature aqueous method and provided a favorable environment for the immobilization of glucose oxidase (GOx). A monolayer of FcC11SH molecular was self-assembled on the surface of gold electrode and introduced a shuttling way for electronic communication between GOx and electrode. The morphology and structure of prepared ZnO nanorods were characterized by employing scanning electron microscopy (SEM), and X-ray powder diffraction (XRD). Electrochemcial measurements of the sensor revealed a high and reproducible sensitivity of 27.8 μA cm(-2) mM(-1), and a linear range from 0.05 to 1.0mM with a detection limit of 20 μM. A relatively low value of Michaelis-Menten constant about 2.95 mM indicates the enhanced affinity of GOx to glucose. To the best of our knowledge, this is the first time to fabricate the glucose biosensor by using ZnO and FcC11SH bilayer structure. PMID:24001511

  6. Microstructural Analysis and the Multicolor UV/Violet/Blue/Green/Yellow PL Observed from the Synthesized ZnO Nano-leaves and Nano-rods

    NASA Astrophysics Data System (ADS)

    Validžić, Ivana Lj.; Mitrić, Miodrag; Ahrenkiel, S. Phillip; Čomor, Mirjana I.

    2015-08-01

    We report the synthesis of zinc oxide (ZnO) nano-leaves and nano-rods under high and extremely high alkaline experimental conditions, via a simple and low-temperature method. By performing transmission electron microscopy it is found that the nano-leaves and nano-rods grow along the (001) direction. Anisotropic, i.e., hkl-dependent line-shape broadening is observed in ZnO powder diffraction patterns. Rietveld analysis using Fullprof with model for handling the anisotropic size-like broadening is performed on these diffraction patterns. The refinement showed that ZnO powders belong to the hexagonal ZnS structure type with space group P63mc, and confirmed that the nano-leaves and nano-rods are oriented along the (001) direction. Results of visualization in 3D of the average crystallite shape obtained from refinement of spherical harmonics coefficients showed elongated shapes in the both samples, exhibiting a slight twisting for nano-leaves. Diffuse reflectance measurements reveal that the optical band-gap energies found for the ZnO nano-leaves and nano-rods is somewhat smaller than a wide-direct band gap of 3.37 eV. We argued that well defined and strong photoluminescence (PL) bands in the visible part that belong to the defects may influence the observed displacement of a ultraviolet (UV) near-band-edge emission, and which is related with obtained slightly lower band-gap energies than the established band gap of bulk ZnO. We discuss processes behind the multicolor UV/violet/blue/green/yellow emission band in PL spectra.

  7. Enhancement of two photon absorption with Ni doping in the dilute magnetic semiconductor ZnO crystalline nanorods

    SciTech Connect

    Rana, Amit Kumar; Kumar, Yogendra; Arjunan, M.S.; Sen, Somaditya; Shirage, Parasharam M. E-mail: paras.shirage@gmail.com; J, Aneesh; Adarsh, K. V.

    2015-12-07

    In this letter, we have investigated the third-order optical nonlinearities of high-quality Ni doped ZnO nanorods crystallized in wurtzite lattice, prepared by the wet chemical method. In our experiments, we found that the two photon absorption coefficient (β) increases by as much as 14 times, i.e., 7.6 ± 0.4 to 112 ± 6 cm/GW, when the Ni doping is increased from 0% to 10%. The substantial enhancement in β is discussed in terms of the bandgap scaling and Ni doping. Furthermore, we also show that the optical bandgap measured by UV-Vis and photoluminescence spectroscopies, continuously redshift with increasing Ni doping concentration. We envision that the strong nonlinear optical properties together with their dilute magnetic effects, they form an important class of materials for potential applications in magneto-optical and integrated optical chips.

  8. The defect passivation effect of hydrogen on the optical properties of solution-grown ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Urgessa, Z. N.; Mbulanga, C. M.; Tankio Djiokap, S. R.; Botha, J. R.; Duvenhage, M. M.; Swart, H. C.

    2016-01-01

    In this study the effect of annealing environment on both low temperature and room temperature photoluminescence (PL) characteristics of ZnO nanorods, grown in solution, is presented. Particular attention is given to the effect of hydrogen defect passivation and its PL related line. It is shown that, irrespective of annealing ambient, an optimum annealing temperature of 300 °C suppresses the defect related emission and significantly improves the UV emission. By considering the stability of hydrogen impurities, the observed results in the PL spectra are analyzed. There is an observed asymmetric broadening on the low energy side of the bound exciton luminescence in the low temperature annealed samples which is explained by a high concentration of ionized impurities related to hydrogen. This has been attributed primarily to the conversion of hydrogen molecule to substitutional hydrogen on the oxygen site (HO) as a result of annealing.

  9. Enhancement of two photon absorption with Ni doping in the dilute magnetic semiconductor ZnO crystalline nanorods

    NASA Astrophysics Data System (ADS)

    Rana, Amit Kumar; J, Aneesh; Kumar, Yogendra; M. S, Arjunan; Adarsh, K. V.; Sen, Somaditya; Shirage, Parasharam M.

    2015-12-01

    In this letter, we have investigated the third-order optical nonlinearities of high-quality Ni doped ZnO nanorods crystallized in wurtzite lattice, prepared by the wet chemical method. In our experiments, we found that the two photon absorption coefficient (β) increases by as much as 14 times, i.e., 7.6 ± 0.4 to 112 ± 6 cm/GW, when the Ni doping is increased from 0% to 10%. The substantial enhancement in β is discussed in terms of the bandgap scaling and Ni doping. Furthermore, we also show that the optical bandgap measured by UV-Vis and photoluminescence spectroscopies, continuously redshift with increasing Ni doping concentration. We envision that the strong nonlinear optical properties together with their dilute magnetic effects, they form an important class of materials for potential applications in magneto-optical and integrated optical chips.

  10. Origin of p-type conductivity of Sb-doped ZnO nanorods and the local structure around Sb ions

    SciTech Connect

    Liang, J. K.; Su, H. L. E-mail: ycwu@hfut.edu.cn Wu, Y. C. E-mail: ycwu@hfut.edu.cn; Chuang, P. Y.; Kuo, C. L.; Huang, S. Y.; Chan, T. S.; Huang, J. C. A. E-mail: ycwu@hfut.edu.cn

    2015-05-25

    To probe the origin of p-type conductivity in Sb-doped ZnO, a careful and detailed synchrotron radiation study was performed. The extended X-ray absorption fine structure and X-ray photoelectron spectroscopy investigations provided the evidence for the formation of the complex defects comprising substitution Sb ions at Zn sites (Sb{sub Zn}) and Zn vacancies within the Sb-doped ZnO lattice. Such complex defects result in the increases of Sb-O coordination number and the Sb valence and thereby lead to the p-type conductivity of Sb-doped ZnO. The back-gate field-effect-transistors based on single nanorod of Sb-doped ZnO were constructed, and the stable p-type conduction behavior was confirmed.

  11. Fast Responsive Gas Sensor of Vertically Aligned Fluorine-Doped Tin Oxide Nanorod Thin Film

    NASA Astrophysics Data System (ADS)

    Cho, Chan-Woo; Lee, Jong-Heun; Riu, Doh-Hyung; Kim, Chang-Yeoul

    2012-04-01

    We prepared fluorine-doped tin oxide (FTO) nanorod films and a conventional FTO thin film for the application of a semiconducting gas sensor by spray pyrolysis method. The lengths of FTO nanorods (FTON, 100 and 500 nm) were controlled by changing deposition times, and FTO thin film (FTOT) was also prepared as a reference. The gas sensitivity test shows FTON with long nanorods had higher sensitivity for both hydrogen and ethanol gases but slow response and recovery times, despite an advantage of the higher gas sensitivity. FTO nanorod film with short length about 100 nm showed relatively lower sensitivity, but fast gas response and recovery characteristics. The fast response and recovery for the analyte gases are attributed to the conductance of FTO nanorods, which is closely related to the diameter and length of nanorods.

  12. Data on the growth of ZnO nanorods on Nylon 6 and photocatalytic activity.

    PubMed

    Ummartyotin, S; Tangnorawich, B

    2016-09-01

    ZnO was successfully synthesized by a conventional synthetic route using zinc nitrate as a source for ZnO formation. X-ray diffraction and thermogravimetric analysis revealed a crystal size of 66 nm of ZnO and a thermal stability of 500 °C. A small amount of ZnO particles was employed as the source for ZnO-rod growth on nylon 6 surfaces. Scanning electron microscope images were taken to evaluate the morphological properties of ZnO, which presented as a hexagonal needle-like shape. Preliminary evaluation of photocatalytic activity was performed through measurement of the degradation of methylene blue solution over 4 h. PMID:27437437

  13. Structure-thermal property correlation of aligned silicon dioxide nanorod arrays

    NASA Astrophysics Data System (ADS)

    Zhu, Jie; Zhu, Yu; Wu, Xuewang; Song, Helun; Zhang, Yaohui; Wang, Xiaojia

    2016-06-01

    Quantitative characterization of thermal properties of nanorod (NR) arrays appears to be challenging due to the complex combination of high volume of air voids, anisotropy, and structural non-uniformity. This work investigates the structure-thermal property correlation of arrays consisting of either vertically aligned or slanted silicon dioxide (SiO2) NRs, fabricated by the dynamic shadowing growth technique. We apply the frequency-dependent time-domain thermoreflectance method to quantify the thermal properties of SiO2 NR arrays that may possess inhomogeneity along the depth direction. The effective thermal conductivities of four SiO2 NR array films and one reference capping layer for the SiO2 NR array are obtained. The impact of the structure on the effective thermal conductivities of the SiO2 NR array is discussed. The lowest effective thermal conductivity among all samples in this work is found to be 0.13 W m-1 K-1 for the slanted NR array. We attribute the reduction in the effective thermal conductivity of the NR array to the discontinuous nature of SiO2 NRs, which reduces the density of the thermal transport channels and thus prevents heat flux from propagating downwards along the through-plane direction. The results from this work facilitate the potential applications of NR-array-based thermal insulators for micro-thermal devices.

  14. PLD-assisted VLS growth of aligned ferrite nanorods, nanowires, and nanobelts-synthesis, and properties.

    PubMed

    Morber, Jenny Ruth; Ding, Yong; Haluska, Michael Stephan; Li, Yang; Liu, J Ping; Wang, Zhong Lin; Snyder, Robert L

    2006-11-01

    We report here a systematic synthesis and characterization of aligned alpha-Fe2O3 (hematite), epsilon-Fe2O3, and Fe3O4 (magnetite) nanorods, nanobelts, and nanowires on alumina substrates using a pulsed laser deposition (PLD) method. The presence of spherical gold catalyst particles at the tips of the nanostructures indicates selective growth via the vapor-liquid-solid (VLS) mechanism. Through a series of experiments, we have produced a primitive "phase diagram" for growing these structures based on several designed pressure and temperature parameters. Transmission electron microscopy (TEM) analysis has shown that the rods, wires, and belts are single-crystalline and grow along <111>m or <110>h directions. X-ray diffraction (XRD) measurements confirm phase and structural analysis. Superconducting quantum interference device (SQUID) measurements show that the iron oxide structures exhibit interesting magnetic behavior, particularly at room temperature. This work is the first known report of magnetite 1D nanostructure growth via the vapor-liquid-solid (VLS) mechanism without using a template, as well as the first known synthesis of long epsilon-Fe2O3 nanobelts and nanowires. PMID:17064124

  15. Energy Level Alignment at Aqueous GaN and ZnO Interfaces

    NASA Astrophysics Data System (ADS)

    Hybertsen, Mark S.; Kharche, Neerav; Muckerman, James T.

    2014-03-01

    Electronic energy level alignment at semiconductor-electrolyte interfaces is fundamental to electrochemical activity. Motivated in particular by the search for new materials that can be more efficient for photocatalysis, we develop a first principles method to calculate this alignment at aqueous interfaces and demonstrate it for the specific case of non-polar GaN and ZnO interfaces with water. In the first step, density functional theory (DFT) based molecular dynamics is used to sample the physical interface structure and to evaluate the electrostatic potential step at the interface. In the second step, the GW approach is used to evaluate the reference electronic energy level separately in the bulk semiconductor (valence band edge energy) and in bulk water (the 1b1 energy level), relative to the internal electrostatic energy reference. Use of the GW approach naturally corrects for errors inherent in the use of Kohn-Sham energy eigenvalues to approximate the electronic excitation energies in each material. With this predicted interface alignment, specific redox levels in water, with potentials known relative to the 1b1 level, can then be compared to the semiconductor band edge positions. Our results will be discussed in the context of experiments in which photoexcited GaN and ZnO drive the hydrogen evolution reaction. Research carried out at Brookhaven National Laboratory under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.

  16. Structural and optical properties of ZnO nanorods by electrochemical growth using multi-walled carbon nanotube-composed seed layers.

    PubMed

    Ko, Yeong Hwan; Kim, Myung Sub; Yu, Jae Su

    2012-01-01

    We reported the enhancement of the structural and optical properties of electrochemically synthesized zinc oxide [ZnO] nanorod arrays [NRAs] using the multi-walled carbon nanotube [MWCNT]-composed seed layers, which were formed by spin-coating the aqueous seed solution containing MWCNTs on the indium tin oxide-coated glass substrate. The MWCNT-composed seed layer served as the efficient nucleation surface as well as the film with better electrical conductivity, thus leading to a more uniform high-density ZnO NRAs with an improved crystal quality during the electrochemical deposition process. For ZnO NRAs grown on the seed layer containing MWCNTs (2 wt.%), the photoluminescence peak intensity of the near-band-edge emission at a wavelength of approximately 375 nm was enhanced by 2.8 times compared with that of the ZnO nanorods grown without the seed layer due to the high crystallinity of ZnO NRAs and the surface plasmon-meditated emission enhancement by MWCNTs. The effect of the MWCNT-composed seed layer on the surface wettability was also investigated.PACS: 81.07.-b; 81.16.-c; 81.07.Pr; 61.48.De. PMID:22221386

  17. N Doping to ZnO Nanorods for Photoelectrochemical Water Splitting under Visible Light: Engineered Impurity Distribution and Terraced Band Structure

    PubMed Central

    Wang, Meng; Ren, Feng; Zhou, Jigang; Cai, Guangxu; Cai, Li; Hu, Yongfeng; Wang, Dongniu; Liu, Yichao; Guo, Liejin; Shen, Shaohua

    2015-01-01

    Solution-based ZnO nanorod arrays (NRAs) were modified with controlled N doping by an advanced ion implantation method, and were subsequently utilized as photoanodes for photoelectrochemical (PEC) water splitting under visible light irradiation. A gradient distribution of N dopants along the vertical direction of ZnO nanorods was realized. N doped ZnO NRAs displayed a markedly enhanced visible-light-driven PEC photocurrent density of ~160 μA/cm2 at 1.1 V vs. saturated calomel electrode (SCE), which was about 2 orders of magnitude higher than pristine ZnO NRAs. The gradiently distributed N dopants not only extended the optical absorption edges to visible light region, but also introduced terraced band structure. As a consequence, N gradient-doped ZnO NRAs can not only utilize the visible light irradiation but also efficiently drive photo-induced electron and hole transfer via the terraced band structure. The superior potential of ion implantation technique for creating gradient dopants distribution in host semiconductors will provide novel insights into doped photoelectrode materials for solar water splitting. PMID:26262752

  18. N Doping to ZnO Nanorods for Photoelectrochemical Water Splitting under Visible Light: Engineered Impurity Distribution and Terraced Band Structure.

    PubMed

    Wang, Meng; Ren, Feng; Zhou, Jigang; Cai, Guangxu; Cai, Li; Hu, Yongfeng; Wang, Dongniu; Liu, Yichao; Guo, Liejin; Shen, Shaohua

    2015-01-01

    Solution-based ZnO nanorod arrays (NRAs) were modified with controlled N doping by an advanced ion implantation method, and were subsequently utilized as photoanodes for photoelectrochemical (PEC) water splitting under visible light irradiation. A gradient distribution of N dopants along the vertical direction of ZnO nanorods was realized. N doped ZnO NRAs displayed a markedly enhanced visible-light-driven PEC photocurrent density of ~160 μA/cm(2) at 1.1 V vs. saturated calomel electrode (SCE), which was about 2 orders of magnitude higher than pristine ZnO NRAs. The gradiently distributed N dopants not only extended the optical absorption edges to visible light region, but also introduced terraced band structure. As a consequence, N gradient-doped ZnO NRAs can not only utilize the visible light irradiation but also efficiently drive photo-induced electron and hole transfer via the terraced band structure. The superior potential of ion implantation technique for creating gradient dopants distribution in host semiconductors will provide novel insights into doped photoelectrode materials for solar water splitting. PMID:26262752

  19. Vertically Well-Aligned ZnO Nanowire Arrays Directly Synthesized from Zn Vapor Deposition Without Catalyst

    NASA Astrophysics Data System (ADS)

    Van Khai, Tran; Van Thu, Le; Huu, Nguyen The; Lam, Tran Dai

    2016-05-01

    Vertically well-aligned ZnO nanowire (NW) arrays with high density have been successfully synthesized on sapphire substrate by thermal evaporation of the zinc powders without catalysts or additives. The ZnO NWs were characterized by scanning electron microscopy, transmission electronic microscopy (TEM), x-ray diffraction, ultraviolet-visible, photoluminescence, Raman, and x-ray photoelectron spectroscopy. The results showed that the obtained ZnO NWs had diameters in the range of 100-130 nm, lengths over several micrometers and well aligned in the direction perpendicular to the substrate surface. The as-synthesized ZnO NWs, which were single crystalline in a hexagonal structure, showed uniform morphology, faceted planes at the tips of the NWs, and grown along the [001] direction. The as-synthesized NW arrays had a good crystal quality with excellent optical properties, showing a sharp and strong ultraviolet emission at 380 nm and a weak visible emission at around 500 nm.

  20. The effect of ZnO nanorod growth duration by hydrothermal deposition method to the photovoltaic properties

    NASA Astrophysics Data System (ADS)

    Ali, Engku Abd Ghapur Engku; Rezali, Roslinda

    2012-11-01

    In this study, the effect of time in hydrothermal method to the growth of ZnO nanorods at low temperature was investigated. The substrate is prepared through three stages which are the seeding stage, the growth stage and the dye sensitized stage. The morphology of the ZnO growth was measured using the Scanning Electron Microscope (SEM). Efficiency was verified by the growth duration of 2, 4 and 8 hours. The current and voltage of the thin films were measured by using two point probes under dark and different light intensity of 10, 20, 50 and 100 Wm-2. The efficiency under light intensity was increased with increasing growth duration. Growth duration of 8 hours combined with Bis(2,2'-bipyridine)-4,4'-dicarboxybipyridine-ruthenium di(N-succinimidyl ester) bis(hexafluorophosphate) and 1-butyl-2,3-dimethylimidazolium chloride thin films on indium tin oxide (ITO) thin films are suitable to increase the efficiency of the device under 100 W/m2 intensity of light which is 1.2 7%.

  1. Efficient Donor Impurities in ZnO Nanorods by Polyethylene Glycol for Enhanced Optical and Glutamate Sensing Properties.

    PubMed

    Elhag, Sami; Khun, Kimleang; Khranovskyy, Volodymyr; Liu, Xianjie; Willander, Magnus; Nur, Omer

    2016-01-01

    In this paper, we show that the possibility of using polyethylene glycol (EG) as a hydrogen source and it is used to assist the hydrothermal synthesis of ZnO nanorods (ZNRs). EG doping in ZNRs has been found to significantly improve their optical and chemical sensing characteristics toward glutamate. The EG was found to have no role on the structural properties of the ZNRs. However, the x-ray photoelectron spectroscopy (XPS) suggests that the EG could induce donor impurities effect in ZnO. Photoluminescence (PL) and UV-Vis. spectra demonstrated this doping effect. Mott-Schottky analysis at the ZNRs/electrolyte interface was used to investigate the charge density for the doped ZNRs and showed comparable dependence on the used amount of EG. Moreover, the doped ZNRs were used in potentiometric measurements for glutamate for a range from 10(-6) M to 10(-3) M and the potential response of the sensor electrode was linear with a slope of 91.15 mV/decade. The wide range and high sensitivity of the modified ZNRs based glutamate biosensor is attributed to the doping effect on the ZNRs that is dictated by the EG along with the high surface area-to-volume ratio. The findings in the present study suggest new avenues to control the growth of n-ZnO nanostructures and enhance the performance of their sensing devices. PMID:26861342

  2. Efficient Donor Impurities in ZnO Nanorods by Polyethylene Glycol for Enhanced Optical and Glutamate Sensing Properties

    PubMed Central

    Elhag, Sami; Khun, Kimleang; Khranovskyy, Volodymyr; Liu, Xianjie; Willander, Magnus; Nur, Omer

    2016-01-01

    In this paper, we show that the possibility of using polyethylene glycol (EG) as a hydrogen source and it is used to assist the hydrothermal synthesis of ZnO nanorods (ZNRs). EG doping in ZNRs has been found to significantly improve their optical and chemical sensing characteristics toward glutamate. The EG was found to have no role on the structural properties of the ZNRs. However, the x-ray photoelectron spectroscopy (XPS) suggests that the EG could induce donor impurities effect in ZnO. Photoluminescence (PL) and UV-Vis. spectra demonstrated this doping effect. Mott-Schottky analysis at the ZNRs/electrolyte interface was used to investigate the charge density for the doped ZNRs and showed comparable dependence on the used amount of EG. Moreover, the doped ZNRs were used in potentiometric measurements for glutamate for a range from 10−6 M to 10−3 M and the potential response of the sensor electrode was linear with a slope of 91.15 mV/decade. The wide range and high sensitivity of the modified ZNRs based glutamate biosensor is attributed to the doping effect on the ZNRs that is dictated by the EG along with the high surface area-to-volume ratio. The findings in the present study suggest new avenues to control the growth of n-ZnO nanostructures and enhance the performance of their sensing devices. PMID:26861342

  3. Growth, modulation and photoresponse characteristics of vertically aligned ZnO nanowires

    NASA Astrophysics Data System (ADS)

    Kar, J. P.; Das, S. N.; Choi, J. H.; Lee, T. I.; Seo, J.; Lee, T.; Myoung, J. M.

    2011-03-01

    Vertically aligned, c-axis oriented zinc oxide (ZnO) nanowires were grown on Si substrate by metal organic chemical vapor deposition (MOCVD) technique, where sputtered aluminum nitride (AlN) film was used as an intermediate layer and thermally evaporated barium fluoride (BaF 2) film as a sacrificial layer. The aspect ratio and density of the nanowires were also varied using only Si microcavity without any interfacial or sacrificial layer. The UV detectors inside the microcavity have shown the higher on-off current ratio and fast photoresponse characteristics. The photoresponse characteristics were significantly varied with the aspect ratio and the density of nanowires.

  4. Investigation of the localized surface plasmon effect from Au nanoparticles in ZnO nanorods for enhancing the performance of polymer solar cells.

    PubMed

    Ho, Yu-Che; Kao, Shao-Hsuan; Lee, Hsin-Che; Chang, Sheng-Kai; Lee, Cheng-Che; Lin, Ching-Fuh

    2015-01-14

    The organic polymer solar cell is recognized as one of the most competitive technologies of the next generation. Au nanoparticles and ZnO nanorods were combined to improve the inverted-structure low-bandgap polymer solar cells and enhance the absorption and efficiency of the devices. However, the Au nanoparticles tend to aggregate in solution, thus reducing the localized surface plasmon resonance (LSPR) effect. The cluster effect on the spectral range of enhancement in the absorption is investigated and the absorption characteristics of the LSPR receive proper modification through our experiment. After reducing the number of Au nanoparticle clusters, the LSPR effect in the devices was clearly verified. The proper combination of the Au nanoparticles and ZnO nanorods leads to the power conversion efficiency of the PTB7 : PC71BM inverted organic solar cell reaching 8.04% after optimizing the process conditions. PMID:25431303

  5. Synergistic Effect of Surface Plasmonic particles and Surface Passivation layer on ZnO Nanorods Array for Improved Photoelectrochemical Water Splitting

    NASA Astrophysics Data System (ADS)

    Liu, Yichong; Yan, Xiaoqin; Kang, Zhuo; Li, Yong; Shen, Yanwei; Sun, Yihui; Wang, Li; Zhang, Yue

    2016-07-01

    One-dimensional zinc oxide nanorods array exhibit excellent electron mobility and thus hold great potential as photoanode for photoelelctrochemical water splitting. However, the poor absorption of visible light and the prominent surface recombination hider the performance improvement. In this work, Au nanoparticles and aluminium oxide were deposited onto the surface of ZnO nanorods to improve the PEC performance. The localized surface plasmon resonance of Au NPs could expand the absorption spectrum to visible region. Simultaneously, the surface of passivation with Au NPs and Al2O3 largely suppressed the photogenerated electron-hole recombination. As a result, the optimal solar-to-hydrogen efficiency of ZnO/Au/Al2O3 with 5 cycles was 6.7 times that of pristine ZnO, ascribed to the synergistic effect of SPR and surface passivation. This research reveals that the synergistic effect could be used as an important method to design efficient photoanodes for photoelectrochemical devices.

  6. Insight into factors affecting the presence, degree, and temporal stability of fluorescence intensification on ZnO nanorod ends

    NASA Astrophysics Data System (ADS)

    Singh, Manpreet; Jiang, Ruibin; Coia, Heidi; Choi, Daniel S.; Alabanza, Anginelle; Chang, Jae Young; Wang, Jianfang; Hahm, Jong-In

    2015-01-01

    We have carried out a combined experimental and simulation study identifying the key physical and optical parameters affecting the presence and degree of fluorescence intensification measured on zinc oxide nanorod (ZnO NR) ends. Previously, we reported on the highly localized, intensified, and prolonged fluorescence signal measured on the NR ends, termed fluorescence intensification on NR ends (FINE). As a step towards understanding the mechanism of FINE, the present study aims to provide insight into the unique optical phenomenon of FINE through experimental and simulation approaches and to elucidate the key factors affecting the occurrence, degree, and temporal stability of FINE. Specifically, we examined the effect of the length, width, and growth orientation of single ZnO NRs on the NR-enhanced biomolecular emission profile after decorating the NR surfaces with different amounts and types of fluorophore-coupled protein molecules. We quantitatively and qualitatively profiled the biomolecular fluorescence signal from individual ZnO NRs as a function of both position along the NR long axis and time. Regardless of the physical dimensions and growth orientations of the NRs, we confirmed the presence of FINE in all ZnO NRs tested by using a range of protein concentrations. We also showed that the manifestation of FINE is not dependent on the spectroscopic signatures of the fluorophores employed. We further observed that the degree of FINE is dependent on the length of the NR with longer NRs showing increased levels of FINE. We also demonstrated that vertically oriented NRs exhibit much stronger fluorescence intensity at the NR ends and a higher level of FINE than the laterally oriented NRs. Additionally, we employed finite-difference time-domain (FDTD) methods to understand the experimental outcomes and to promote our understanding of the mechanism of FINE. Particularly, we utilized the electrodynamic simulations to examine both near-field and far-field emission

  7. Arginine-assisted immobilization of silver nanoparticles on ZnO nanorods: an enhanced and reusable antibacterial substrate without human cell cytotoxicity

    NASA Astrophysics Data System (ADS)

    Agnihotri, Shekhar; Bajaj, Geetika; Mukherji, Suparna; Mukherji, Soumyo

    2015-04-01

    Silver-based hybrid nanomaterials are gaining interest as potential alternatives for conventional antimicrobial agents. Herein, we present a simple, facile and eco-friendly approach for the deposition of silver nanoparticles (AgNPs) on ZnO nanorods, which act as a nanoreactor for in situ synthesis and as an immobilizing template in the presence of arginine. The presence of arginine enhanced the stability of ZnO deposition on the glass substrate by hindering the dissolution of zinc under alkaline conditions. Various Ag/ZnO hybrid nanorod (HNR) samples were screened to obtain a high amount of silver immobilization on the ZnO substrate. Ag/ZnO HNRs displayed potent antibacterial ability and could achieve 100% kill for both Escherichia coli and Bacillus subtilis strains under various test conditions. The hybrid material mediated its dual mode of antibacterial action through direct contact-killing and release of silver ions/nanoparticles and showed superior bactericidal performance compared to pure ZnO nanorods and colloidal AgNPs. No significant decline in antibacterial efficacy was observed even after the same substrate was repeatedly reused multiple times. Interestingly, the amount of Ag and Zn release was much below their maximal limit in drinking water, thus preventing potential health hazards. Immobilized AgNPs showed no cytotoxic effects on the human hepatocarcinoma cell line (HepG2). Moreover, treating cells with the antibacterial substrate for 24 hours did not lead to significant generation of reactive oxygen species (ROS). The good biocompatibility and bactericidal efficacy would thus make it feasible to utilize this immobilization strategy for preparing new-generation antibacterial coatings.Silver-based hybrid nanomaterials are gaining interest as potential alternatives for conventional antimicrobial agents. Herein, we present a simple, facile and eco-friendly approach for the deposition of silver nanoparticles (AgNPs) on ZnO nanorods, which act as a

  8. Microstructural and optical properties of nanocrystalline ZnO deposited onto vertically aligned carbon nanotubes by physical vapor deposition

    SciTech Connect

    Borkar, Tushar; Chang, Won Seok; Hwang, Jun Yeon; Shepherd, Nigel D.; Banerjee, Rajarshi

    2012-10-15

    Nanocrystalline ZnO films with thicknesses of 5 nm, 10 nm, 20 nm, and 50 nm were deposited via magnetron sputtering onto the surface of vertically aligned multi-walled carbon nanotubes (MWCNTs). The ZnO/CNTs heterostructures were characterized by scanning electron microscopy, high resolution transmission electron microscopy, and X-ray diffraction studies. No structural degradation of the CNTs was observed and photoluminescence (PL) measurements of the nanostructured ZnO layers show that the optical properties of these films are typical of ZnO deposited at low temperatures. The results indicate that magnetron sputtering is a viable technique for growing heterostructures and depositing functional layers onto CNTs.

  9. Field emission behavior of vertically aligned ZnO nanowire planar cathodes

    SciTech Connect

    Semet, V.; Binh, Vu Thien; Pauporte, Th.; Joulaud, L.; Vermersch, F. J.

    2011-03-01

    A field emission (FE) study by scanning anode field emission microscopy was performed to evaluate the FE properties of vertically aligned zinc oxide (ZnO) nanowire arrays electrodeposited on a plane conductive surface. The specific FE behaviors of the cathode observed experimentally are (1) a turn-on macroscopic field of about 6 V/{mu}m for a FE current density J{sub FE} 5 x 10{sup -4} A/cm{sup 2}, (2) a stable FE characteristics for 5 x 10{sup -4} < J{sub FE} < 5 x 10{sup -2} A/cm{sup 2}, and (3) a brutal shut down of FE when J{sub FE} crossed a limiting value of {approx}0.05 A/cm{sup 2} due to a rapid evolution of the nanowires toward a bulbous tip geometry or a complete melting. A physical process of FE from ZnO nanostructures is proposed from the experimental data analyses. An effective surface barrier of about 1 eV was determined from the experimental Fowler-Nordheim plot and the presence of a Zn enriched surface was assumed in considering the possibility of important modifications of the crystallography and charge transfers at the surface of ZnO nanowires during the application of the strong electric field required for FE.

  10. Enhanced Photocatalytic Performance of ZnO Nanorods Coupled by Two-Dimensional α-MoO3 Nanoflakes under UV and Visible Light Irradiation.

    PubMed

    Hang, Da-Ren; Sharma, Krishna Hari; Chen, Chun-Hu; Islam, Sk Emdadul

    2016-08-26

    We exploit the utilization of two-dimensional (2D) molybdenum oxide nanoflakes as a co-catalyst for ZnO nanorods (NRs) to enhance their photocatalytic performance. The 2D nanoflakes of orthorhombic α-MoO3 were synthesized through a sonication-aided exfoliation technique. The 2D MoO3 nanoflakes can be further converted to substoichiometric quasi-metallic MoO3-x by using UV irradiation. Subsequently, 1D-2D MoO3 /ZnO NR and MoO3-x /ZnO NR composite photocatalysts have been successfully synthesized. The photocatalytic performances of the novel nanosystems in the decomposition of methylene blue are studied by using UV- and visible-illumination setup. The incorporated 2D nanoflakes show a positive influence on the photocatalytic activity of the ZnO. The obtained rate constant values follow the order of pristine ZnO NRZnO NRZnO NR composites. The enhancement of the photocatalytic efficiency can be ascribed to a fast charge carrier separation and transport within the heterojunctions of the MoO3 /ZnO NRs. In particular, the best photocatalytic performance of the MoO3-x /ZnO NR composite can be additionally attributed to a quasi-metallic conductivity and substoichiometry-induced mid-gap states, which extend the light absorption range. A tentative photocatalytic degradation mechanism was proposed. The strategy presented in this work not only demonstrates that coupling with nanoscale molybdenum oxide nanoflakes is a promising approach to significantly enhance the photocatalytic activity of ZnO but also hints at new type of composite catalyst with extended applications in energy conversion and environmental purification. PMID:27483050

  11. Morphologically Templated Growth of Aligned Spinel CoFe2O4 Nanorods

    SciTech Connect

    Zhang, Zongtao; Rondinone, Adam Justin; Ma, Jianxing; Shen, Jian; Dai, Sheng

    2005-01-01

    Uniaxially aligned CoFe{sub 2}O{sub 4} nanorods are obtained by coprecipitation of Co{sup 2+}, Fe{sub 2+}, and C{sub 2}O{sub 4}{sup 2-} ions in a microemulsion solution, and subsequent high-temperature decomposition of CoFe{sub 2}(C{sub 2}O{sub 4}){sub 3}. Each nanorod is made up of a 'tectonic' assembly of CoFe{sub 2}O{sub 4} nanocrystals. Magnetization of such SoFe{sub 2}O{sub 4} materials may lead to their use in high-density magnetic recording media and high-performance electromagnetic and spintronic devices.

  12. Optical, structural and morphological studies of (ZnO) nano-rod thin films for biosensor applications using sol gel technique

    NASA Astrophysics Data System (ADS)

    Wahab, H. A.; Salama, A. A.; El-Saeid, A. A.; Nur, O.; Willander, M.; Battisha, I. K.

    Uniformly distributed ZnO nano-rods (NRs) with diameters in nano-scale have been successfully grown in two stages; the first at annealing temperature (250-300 °C) for seed layer preparation on glass substrate by using sol gel technique and the second at low temperature (90-95 °C) by aqueous chemical growth (ACG) method. The same prepared thin film samples were grown on the surface of silver wire (0.25 mm in diameters) to produce electrochemical nano-sensors. The structure and the morphology of the prepared samples will be evaluated using XRD, Scanning electron microscope SEM. The absorption coefficient (α) and the band gap (Eg) for ZnO NRs thin films were determined. (α) was decreased by increasing the annealing temperature due to the increase of the surface roughness caused by higher temperature, where the creation of surface roughness gives rise to multi-reflections which, capture the reflected radiation and enhance the absorptivity. We are presenting an iron ion (Fe3+) potentiometric sensor based on functionalized ZnO nano-rods with selective iono-phore (18 crown 6). Zinc oxide nanorods (NRs) thin films with a diameter of about 68 up to 94 nm were grown on silver wire and gold coated glass.

  13. Au-coated ZnO nanorods on stainless steel fiber for self-cleaning solid phase microextraction-surface enhanced Raman spectroscopy.

    PubMed

    Li, Bo; Shi, Yu-E; Cui, Jingcheng; Liu, Zhen; Zhang, Xiaoli; Zhan, Jinhua

    2016-06-01

    Solid phase microextraction-surface enhanced Raman spectroscopy (SPME-SERS), combining the pretreatment and determination functions, has been successfully used in environmental analysis. In this work, Au-coated ZnO nanorods were fabricated on stainless steel fiber as a self-cleaning SERS-active SPME fiber. The ZnO nanorods grown on stainless steel fiber were prepared via a simple hydrothermal approach. Then the obtained nanostructures were decorated with Au nanoparticles through ion-sputtering at room temperature. The obtained SERS-active SPME fiber is a reproducible sensitivity sensor. Taking p-aminothiophenol as the probe molecule, the RSD value of the SERS-active SPME fiber was 8.9%, indicating the fiber owned good uniformity. The qualitative and quantitative detection of crystal violet and malachite green was also achieved. The log-log plot of SERS intensity to crystal violet and malachite green concentration showed a good linear relationship. Meanwhile, this SERS-active SPME fiber can achieve self-cleaning owning to the excellent photocatalytic performance of ZnO nanorods. Crystal violet was still successfully detected even after five cycles, which indicated the high reproducibility of this SERS-active SPME fiber. PMID:27155303

  14. Effect of Cobalt Concentration and Oxygen Vacancy on Magnetism of Co Doped ZnO Nanorods.

    PubMed

    Li, Congli; Che, Ping; Sun, Changyan; Li, Wenjun

    2016-03-01

    Zn(1-x)Co(x)O (x = 0-0.07) single-crystalline nanorods were prepared by a modified microemulsion route. The crystalline structure, morphology, optical, and hysteresis loop at low and room temperature of as-prepared materials were characterized by XRD, TEM, PL spectra, and magnetic measurement respectively. The nanorods are 80-250 nm in diameter and about 3 μm in length. X-ray diffraction data, TEM images confirm that the materials synthesized in optimal conditions are ZnO:Co single crystalline solid solution without any impurities related to Co. The PL spectra show that the ferromagnetic samples exhibit strong Zn interstitials and oxygen vacancy emission indicating defects may stabilize ferromagnetic order in the obtained diluted magnetic semiconductors. Magnetic measurements show that the Zn(1-x)Co(x)O nanorods exist obvious ferromagnetic characteristics with T(c) above 300 K. M(s) and coercivities first increase and then decrease with dopant concentration increasing, reaching the highest for 3% doping level. The structural and magnetic properties of these samples support the hypothesis that the FM of DMS nanorods is due to a defect mediated mechanism instead of cobalt nanoclusters and carrier mediated. PMID:27455697

  15. Nanoscale interface engineering in ZnO twin nanorods for proposed phonon tunnel devices.

    PubMed

    Singh, Avanendra; Senapati, Kartik; Satpati, Biswarup; Kumar, Mohit; Sahoo, Pratap K

    2015-02-14

    Zinc oxide twin nanorods, with two identical crystalline sections connected by an amorphous layer, were reproducibly grown using a simple one-step hydrothermal technique. The thickness of the amorphous layer between the crystalline segments was tunable with growth parameters, as confirmed by high resolution transmission electron microscopy. The photoluminescence spectra of these twin nanorods exhibit strong near band edge emission in the UV range, with convoluted phonon sidebands. De-convolution analyses of these spectra showed that the amorphous interlayers act as effective phonon barriers beyond a certain thickness. Such oriented grown individual crystalline-amorphous-crystalline structures may be a suitable test system for fundamental studies of phonon tunneling in the nanostructure. While physical vapor deposition techniques are seriously constrained in realizing crystalline-amorphous-crystalline structures, our results show the viability of engineering embedded interfaces via chemical routes. PMID:25572135

  16. Synthesis of reduced graphene oxide/ZnO nanorods composites on graphene coated PET flexible substrates

    SciTech Connect

    Huang, Lei Guo, Guilue; Liu, Yang; Chang, Quanhong; Shi, Wangzhou

    2013-10-15

    Graphical abstract: - Highlights: • ZnO nanorods synthesized on CVD-graphene and rGO surfaces, respectively. • ZnO/CVD-graphene and ZnO/rGO form a distinctive porous 3D structure. • rGO/ZnO nanostructures possibility in energy storage devices. - Abstract: In this work, reduced graphene oxide (rGO)/ZnO nanorods composites were synthesized on graphene coated PET flexible substrates. Both chemical vapor deposition (CVD) graphene and reduced graphene oxide (rGO) films were prepared following by hydrothermal growth of vertical aligned ZnO nanorods. Reduced graphene sheets were then spun coated on the ZnO materials to form a three dimensional (3D) porous nanostructure. The morphologies of the ZnO/CVD graphene and ZnO/rGO were investigated by SEM, which shows that the ZnO nanorods grown on rGO are larger in diameters and have lower density compared with those grown on CVD graphene substrate. As a result of fact, the rough surface of nano-scale ZnO on rGO film allows rGO droplets to seep into the large voids of ZnO nanorods, then to form the rGO/ZnO hierarchical structure. By comparison of the different results, we conclude that rGO/ZnO 3D nanostructure is more desirable for the application of energy storage devices.

  17. Nucleation, Growth Mechanism, and Controlled Coating of ZnO ALD onto Vertically Aligned N-Doped CNTs.

    PubMed

    Silva, R M; Ferro, M C; Araujo, J R; Achete, C A; Clavel, G; Silva, R F; Pinna, N

    2016-07-19

    Zinc oxide thin films were deposited on vertically aligned nitrogen-doped carbon nanotubes (N-CNTs) by atomic layer deposition (ALD) from diethylzinc and water. The study demonstrates that doping CNTs with nitrogen is an effective approach for the "activation" of the CNTs surface for the ALD of metal oxides. Conformal ZnO coatings are already obtained after 50 ALD cycles, whereas at lower ALD cycles an island growth mode is observed. Moreover, the process allows for a uniform growth from the top to the bottom of the vertically aligned N-CNT arrays. X-ray photoelectron spectroscopy demonstrates that ZnO nucleation takes place at the N-containing species on the surface of the CNTs by the formation of the Zn-N bonds at the interface between the CNTs and the ZnO film. PMID:27333190

  18. Real-time monitoring of the solution growth of ZnO nanorods arrays by quartz microbalances and in-situ temperature sensors

    PubMed Central

    Orsini, Andrea; Falconi, Christian

    2014-01-01

    Wet-chemistry methods have crucial advantages for the synthesis of nanostructures, including simple, low-cost, large-area, and low-temperature deposition on almost arbitrary substrates. Nevertheless, the rational design of improved wet-chemistry procedures is extremely difficult because, in practice, only post-synthesis characterization is possible. In fact, the only methods for on-line monitoring the growth of nanostructures in liquids are complex, expensive and introduce intricate artifacts. Here we demonstrate that electro-mechanically resonating substrates and in-situ temperature sensors easily enable an accurate real-time investigation of reaction kinetics and, in combination with conventional SEM imaging, greatly facilitate the rational design of optimized synthesis procedures; in particular, such a simple approach provides useful insight for the development of processes where one or more key parameters are dynamically adjusted. As a proof-of-concept, first, we accurately characterize a process for fabricating arrays of ZnO nanorods; afterwards, we design a dynamic-temperature process that, in comparison with the corresponding constant-temperature procedure, is almost-ideally energy efficient and results in ZnO nanorods with improved characteristics in terms of length, aspect ratio, and total deposited nanorods mass. This is a major step towards the rational design of dynamic procedures for the solution growth of nanostructures. PMID:25190110

  19. ZnO nanorods prepared via ablation of Zn with millisecond laser in liquid media.

    PubMed

    Honda, Mitsuhiro; Goto, Taku; Owashi, Tatsuki; Rozhin, Alex G; Yamaguchi, Shigeru; Ito, Tsuyohito; Kulinich, Sergei A

    2016-09-14

    ZnO nanomaterials with controlled size, shape and surface chemistry are required for applications in diverse areas, such as optoelectronics, photocatalysis, biomedicine and so on. Here, we report on ZnO nanostructures with rod-like and spherical shapes prepared via laser ablation in liquid using a laser with millisecond-long pulses. By changing laser parameters (such as pulse width and peak power), the size or aspect ratio of such nanostructures could be tuned. The surface chemistry and defects of the products were also strongly affected by applied laser conditions. The preparation of different structures is explained by the intense heating of liquid media caused by millisecond-long pulses and secondary irradiation of already-formed nanostructures. PMID:27507010

  20. Obtaining a Well-Aligned ZnO Nanotube Array Using the Hydrothermal Growth Method / Labi Sakārtotu Zno Nanocauruļu Kopu Iegūšana, Izmantojot Hidrotermālo Metodi

    NASA Astrophysics Data System (ADS)

    Krasovska, M.; Gerbreders, V.; Paskevics, V.; Ogurcovs, A.; Mihailova, I.

    2015-10-01

    Optimal growing parameters have been found using the hydrothermal method to obtain well-aligned vertical ZnO nanorod and nanotube arrays. The influence of different growing factors (such as temperature, growing solution concentration, method of obtaining seed layer and condition) on nanotube morphology and size is described in the paper. Well-structured ZnO nanotubes have been obtained by using a selfselective etching method with lowering temperatures of growth during the hydrothermal process. It is shown that the optical properties of the nanostructure arrays obtained are sensitive to the medium in which they are placed, which is why they can be used as sensors for pure substance detection and in different solutions for impurity determination. Dotajā darbā tika noteikti optimāli parametri labi sakārtotu ZnO nanocaurulīšu kopu iegūšanai, izmantojot hidrotermālo metodi ar temperatūras pazemināšanu, jeb t.s. selektīvu pa\\vskodināšanas metodi (self-selective etching), ir uzsvērtas šās metodes priekšrocības salīdzinājumā ar ķīmiskās kodināšanas metodi, kā arī tika aprakstīta dažādu augšanas faktora (tādu, ka darba šķīduma koncentrācija, augšanas temperatūra un laiks, iedīgļu slāņa iegūšanas veids un iegūšanas parametri) ietekme uz iegūtu nanostraktūra morfoloģiju. Tika konstatēts, ka noteicošu lomu ZnO nanocaurulīšu audzēšanas procesā spēlē iedīgļu slāņa graudu izmēri, kas savā staipā nosaka augošu nanostieņu izmērus un to tendenci pie pa\\vskodināšanas. Rentgenogrannnas parāda, ka iegūtām pie noteiktiem parametriem ZnO nanostruktūrām piemīt augsta kristāliskuma pakāpe un sakārtotība vertikālā virzienā. Optiskie mērījumi parāda, ka ZnO nanocauralītes ir jutīgas gan pret tīrām vielām (ūdens, spirts), gan pret dažādiem šķīdumiem, kas ļauj izmantot tos kā pie­jaukumu sensora. Salīdzinājumā ar ZnO nanostieņiem caurulīšu jūtība pieaug, jo pieaug nanostrakt

  1. A photoelectrochemical methanol fuel cell based on aligned TiO2 nanorods decorated graphene photoanode.

    PubMed

    Li, Xinyuan; Wang, Guowen; Jing, Lin; Ni, Wei; Yan, Huan; Chen, Chao; Yan, Yi-Ming

    2016-02-11

    We report the photoelectrochemical (PEC) oxidation of methanol on a rationally designed graphene-TiO2 nanorod array (G-TNR) photoanode. A PEC methanol fuel cell was constructed by coupling the G-TNR photoanode with a cathode. This study raises a conceptual fuel cell that realizes the synergistic energy conversion of chemical energy and solar energy. PMID:26741738

  2. Ag-doped ZnO nanorods coated metal wire meshes as hierarchical photocatalysts with high visible-light driven photoactivity and photostability.

    PubMed

    Hsu, Mu-Hsiang; Chang, Chi-Jung

    2014-08-15

    Ag-doped ZnO nanorods were grown on stainless-steel wire meshes to fabricate the hierarchical photocatalysts with excellent visible light driven activity and anti-photocorrosion property. Effects of Ag doping and the surface structure on the surface chemistry, surface wetting properties, absorption band shift, photoelectrochemical response, and photocatalytic decolorization properties of the hierarchical photocatalysts, together with the stability of photocatalytic activity for recycled photocatalysts were investigated. Ag doping leads to red-shift in the absorption band and increased visible light absorption. Nanorods coated wire meshes hierarchical structure not only increases the surface area of photocatalysts but also makes the surface hydrophilic. The photocatalytic activity enhancement and reduced photocorrosion can be achieved because of increased surface area, enhanced hydrophilicity, and the interaction between the metal wire/ZnO and Ag/ZnO heterostructure interface which can improve the charge separation of photogenerated charge carriers. PMID:24997260

  3. Effect of concentration and heating conditions on microwave-assisted hydrothermal synthesis of ZnO nanorods

    SciTech Connect

    Shojaee, Nadi Ebadzadeh, Touradj Aghaei, Alireza

    2010-12-15

    Research Highlights: {yields} The increase of concentration leads to the increase of nuclei and decrease of nanorods diameter. {yields} The increase of irradiation power results in the decrease of nanorods diameter and increase their numbers. {yields} The increase of irradiation time affects more on length of nanorods.

  4. One-step growth of well-aligned TiO2 nanorod arrays for flexible dye-sensitized solar cells.

    PubMed

    Chen, Xiaoxu; Tang, Qunwei; Zhao, Zhiyuan; Wang, Xinghui; He, Benlin; Yu, Liangmin

    2015-02-01

    We present here the feasibility of growing well-aligned TiO2 nanorod arrays by a dc reactive magnetron sputtering strategy for flexible dye-sensitized solar cells. These flexible devices yield an efficiency of 5.3% in comparison to 1.2% from traditional TiO2 nanoparticles by a low-temperature technique. PMID:25531300

  5. Enhanced surface photovoltage response of ZnO nanorod based inorganic/organic hybrid junctions by constructing embedded bulk composite structures

    NASA Astrophysics Data System (ADS)

    Kang, Dawei; Liu, Aimin; Bian, Jiming; Hu, Zengquan; Liu, Yiting; Qiao, Fen

    2013-02-01

    Two kinds of inorganic/organic hybrid junctions based on ZnO nanorods (NRs), i.e. two-layer planar heterojunction and embedded bulk composite structures, were fabricated on ITO glass substrates. Surface photovoltage (SPV) methods based on a Kelvin probe and a lock-in amplifier were respectively utilized to study the photogenerated charges at the surface and the interface in the ZnO-based hybrid junctions. Results indicate that the lock-in SPV response of the bulk composite structure is much higher than its planar counterpart in terms of intensity and spectral range. Therefore, ZnO NR/PF (poly(9,9-di-n-octylfluorenyl-2,7-diyl)) embedded bulk composite structures are more suitable and preferred for photovoltaic application.

  6. Indirect Determination of Mercury Ion by Inhibition of a Glucose Biosensor Based on ZnO Nanorods

    PubMed Central

    Chey, Chan Oeurn; Ibupoto, Zafar Hussain; Khun, Kimleang; Nur, Omer; Willander, Magnus

    2012-01-01

    A potentiometric glucose biosensor based on immobilization of glucose oxidase (GOD) on ZnO nanorods (ZnO-NRs) has been developed for the indirect determination of environmental mercury ions. The ZnO-NRs were grown on a gold coated glass substrate by using the low temperature aqueous chemical growth (ACG) approach. Glucose oxidase in conjunction with a chitosan membrane and a glutaraldehyde (GA) were immobilized on the surface of the ZnO-NRs using a simple physical adsorption method and then used as a potentiometric working electrode. The potential response of the biosensor between the working electrode and an Ag/AgCl reference electrode was measured in a 1mM phosphate buffer solution (PBS). The detection limit of the mercury ion sensor was found to be 0.5 nM. The experimental results provide two linear ranges of the inhibition from 0.5 × 10−6 mM to 0.5 × 10−4 mM, and from 0.5 × 10−4 mM to 20 mM of mercury ion for fixed 1 mM of glucose concentration in the solution. The linear range of the inhibition from 10−3 mM to 6 mM of mercury ion was also acquired for a fixed 10 mM of glucose concentration. The working electrode can be reactivated by more than 70% after inhibition by simply dipping the used electrode in a 10 mM PBS solution for 7 min. The electrodes retained their original enzyme activity by about 90% for more than three weeks. The response to mercury ions was highly sensitive, selective, stable, reproducible, and interference resistant, and exhibits a fast response time. The developed glucose biosensor has a great potential for detection of mercury with several advantages such as being inexpensive, requiring minimum hardware and being suitable for unskilled users. PMID:23202200

  7. Indirect determination of mercury ion by inhibition of a glucose biosensor based on ZnO nanorods.

    PubMed

    Chey, Chan Oeurn; Ibupoto, Zafar Hussain; Khun, Kimleang; Nur, Omer; Willander, Magnus

    2012-01-01

    A potentiometric glucose biosensor based on immobilization of glucose oxidase (GOD) on ZnO nanorods (ZnO-NRs) has been developed for the indirect determination of environmental mercury ions. The ZnO-NRs were grown on a gold coated glass substrate by using the low temperature aqueous chemical growth (ACG) approach. Glucose oxidase in conjunction with a chitosan membrane and a glutaraldehyde (GA) were immobilized on the surface of the ZnO-NRs using a simple physical adsorption method and then used as a potentiometric working electrode. The potential response of the biosensor between the working electrode and an Ag/AgCl reference electrode was measured in a 1mM phosphate buffer solution (PBS). The detection limit of the mercury ion sensor was found to be 0.5 nM. The experimental results provide two linear ranges of the inhibition from 0.5 × 10(-6) mM to 0.5 × 10(-4) mM, and from 0.5 × 10(-4) mM to 20 mM of mercury ion for fixed 1 mM of glucose concentration in the solution. The linear range of the inhibition from 10(-3) mM to 6 mM of mercury ion was also acquired for a fixed 10 mM of glucose concentration. The working electrode can be reactivated by more than 70% after inhibition by simply dipping the used electrode in a 10 mM PBS solution for 7 min. The electrodes retained their original enzyme activity by about 90% for more than three weeks. The response to mercury ions was highly sensitive, selective, stable, reproducible, and interference resistant, and exhibits a fast response time. The developed glucose biosensor has a great potential for detection of mercury with several advantages such as being inexpensive, requiring minimum hardware and being suitable for unskilled users. PMID:23202200

  8. Oriented ZnO nanorods grown on a porous polyaniline film as a novel coating for solid-phase microextraction.

    PubMed

    Zeng, Jingbin; Zhao, Cuiying; Chong, Fayun; Cao, Yingying; Subhan, Fazle; Wang, Qianru; Yu, Jianfeng; Zhang, Maosheng; Luo, Liwen; Ren, Wei; Chen, Xi; Yan, Zifeng

    2013-12-01

    In this work, oriented ZnO nanorods (ZNRs) were in situ hydrothermally grown on a porous polyaniline (PANI) film to function as a solid-phase microextraction (SPME) coating. Scanning electron microscopy (SEM) study revealed that the majority of oriented ZNRs grew from pores of PANI matrix, which protected the ZNRs from easily peeling off during operation. Furthermore, in this process, a thin layer of PANI was found to cover the ZNRs, which can enlarge the effective surface area of the composite coating. This ZNRs/PANI composite coating combined the merits of both ZNRs and PANI and, thus, has several advantages over that of sole PANI film and ZNRs coating such as improved extraction efficiency for benzene homologues, enhanced mechanical stability and longer service life (over 150 cycles of SPME-GC operation). Coupled with gas chromatography-flame ionization detector (GC-FID), the optimized SPME-GC-FID method was used for the analysis of six benzene homologues in water samples. The calibration curves were linear from 1 to 1000μgL(-1) for each analyte, and the limits of detection were between 0.001 and 0.024μgL(-1). Single fiber repeatability and fiber-to-fiber reproducibility were in the range of 1.3-6.8% and 5.3-11.2%, respectively. The spiked recoveries at 100 and 5μgL(-1) for three environmental water samples were in the range of 79.8-115.4% and 73.7-117.4%, respectively. PMID:24182864

  9. P3HT:PCBM:pentacene inverted polymer solar cells with roughened Al-doped ZnO nanorod array and photoelectrochemical treatment

    NASA Astrophysics Data System (ADS)

    Lee, Hsin-Ying; Huang, Hung-Lin

    2014-05-01

    In this work, the P3HT:PCBM:pentacene (1:0.8:0.065 by weight) inverted polymer solar cells with roughened Aldoped ZnO (AZO) nanorod array were fabricated. The pentacene doping could modulate the hole mobility and the electron mobility in the active layer. The optimal hole-electron mobility balance ( µh/ µe=1.000) was achieved as the pentacene doping ratio of 0.065. The 100-nm-long AZO nanorod array were formed as the carrier collection layer and the carrier transportation layer of the inverted polymer solar cells using the combination techniques of the laser interference photolithography method and the wet etching process. Because the AZO nanorod array was prepared using the wet etching process, more defects were formed on the sidewall surface of the AZO nanorods. In this work, the photoelectrochemical (PEC) method was used to grow Zn(OH)2 and Al(OH)3 thin layer on the sidewall surface of the AZO nanorods, which could reduce the carrier recombination path in the inverted polymer solar cells. Compared with the P3HT:PCBM:pentacene (1:0.8:0.065) inverted polymer solar cells without PEC treatment, the short circuit current density and the power conversion efficiency of the inverted polymer solar cells with PEC treatment were increased from 14.56 mA/cm2 to 15.85 mA/cm2 and from 5.45% to 6.13%, respectively. The enhancement in the performance of the inverted polymer solar cells with PEC treatment could be attributed to that the PEC treatment could effectively passivate the defects on the surface of the AZO nonorods.

  10. Hydrothermally Grown In-doped ZnO Nanorods on p-GaN Films for Color-tunable Heterojunction Light-emitting-diodes

    PubMed Central

    Park, Geun Chul; Hwang, Soo Min; Lee, Seung Muk; Choi, Jun Hyuk; Song, Keun Man; Kim, Hyun You; Kim, Hyun-Suk; Eum, Sung-Jin; Jung, Seung-Boo; Lim, Jun Hyung; Joo, Jinho

    2015-01-01

    The incorporation of doping elements in ZnO nanostructures plays an important role in adjusting the optical and electrical properties in optoelectronic devices. In the present study, we fabricated 1-D ZnO nanorods (NRs) doped with different In contents (0% ~ 5%) on p-GaN films using a facile hydrothermal method, and investigated the effect of the In doping on the morphology and electronic structure of the NRs and the electrical and optical performances of the n-ZnO NRs/p-GaN heterojunction light emitting diodes (LEDs). As the In content increased, the size (diameter and length) of the NRs increased, and the electrical performance of the LEDs improved. From the electroluminescence (EL) spectra, it was found that the broad green-yellow-orange emission band significantly increased with increasing In content due to the increased defect states (oxygen vacancies) in the ZnO NRs, and consequently, the superposition of the emission bands centered at 415 nm and 570 nm led to the generation of white-light. These results suggest that In doping is an effective way to tailor the morphology and the optical, electronic, and electrical properties of ZnO NRs, as well as the EL emission property of heterojunction LEDs. PMID:25988846

  11. The role of cellulosic chains of cotton in biosynthesis of ZnO nanorods producing multifunctional properties: Mechanism, characterizations and features.

    PubMed

    Aladpoosh, R; Montazer, M

    2015-08-01

    In situ synthesis of ZnO nanorods on cellulosic chains of cotton fabric was accomplished using natural plant source namely Keliab and zinc acetate. Hierarchical mechanism of nano ZnO generation and deposition on cellulosic chains of cotton fabric was discussed in details and several analytical techniques were used to characterize the formation of nano ZnO wurtzite structure. The morphology, crystal phase, and chemical structure of the fabric were characterized by scanning electron microscope, X-ray diffraction and energy dispersive X-ray spectroscopy. Further, interaction between ZnO and functional groups of cellulosic chains of cotton fabric was studied by Fourier transforms infrared spectroscopy. The influence of zinc acetate and Keliab solution on the self-cleaning activity of the treated cellulosic fabric was investigated with a central composite design based on surface response methodology. The treated fabrics showed self-cleaning activity toward methylene blue degradation under day light irradiation. The optimized treated sample showed high antibacterial efficiency against Staphylococcus aureus and Escherichia coli with enhanced tensile strength and higher crease recovery angle. PMID:25933530

  12. Synthesis and characterization of flowerlike ZnO nanostructures via an ethylenediamine-meditated solution route

    SciTech Connect

    Gao Xiangdong . E-mail: xdgao@mail.sic.ac.cn; Li Xiaomin; Yu Weidong

    2005-04-15

    Flowerlike ZnO nanostructures were deposited on Si substrate by choosing hexamethylenetetramine as the nucleation control reagent and ethylenediamine as the chelating and capping reagent. Structural and optical measurements reveal that obtained ZnO exhibits well-defined flowerlike morphology, hexagonal wurtzite structure, uniform distribution on substrate, and strong photoluminescence in ultraviolet band. The well-arrayed pedals of each ZnO flower possess the typical tapering feature, and are built up by many well-aligned ZnO nanorods. Moreover, each single nanorod building up the pedal exhibits the single crystal nature and the growth direction along c-axis. Effects of the precursor composition on the morphology of ZnO were discussed.

  13. Contact light-emitting diodes based on vertical ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Panin, G. N.; Cho, Hak Dong; Lee, Sang Wuk; Kang, Tae Won

    2014-05-01

    We report vertical contact light-emitting diodes (VCLEDs), that are based on heterojunctions formed by using the point contacts of n-ZnO nanorods (NRs) to the p-type semiconductor substrate and that are fabricated using a new approach to the formation of LEDs (Appl. Phys. Lett. 98, 093110 (2011)). A p-type GaN film grown on a sapphire substrate was used to form n-ZnO NRs/p-GaN VCLEDs on a large area of about 4 cm2. The VCLEDs emitted a pure blue electroluminescence with high efficiency. Electroluminescence at 470 nm, which is visible to the naked eye, started at small current of about 50 μA and is attributed to the good optical properties of the structurallyperfect heterojunctions in the point contacts. The VCLED configuration allows the creation of ZnO/p-GaN nano-LEDs of high density and high-quality with a greatly reduced concentration of nonradiative defects in the active regions. The VCLEDs showed the high brightness of light required for active matrix displays and general solid-state lighting.

  14. Synergistic Effect of Surface Plasmonic particles and Surface Passivation layer on ZnO Nanorods Array for Improved Photoelectrochemical Water Splitting.

    PubMed

    Liu, Yichong; Yan, Xiaoqin; Kang, Zhuo; Li, Yong; Shen, Yanwei; Sun, Yihui; Wang, Li; Zhang, Yue

    2016-01-01

    One-dimensional zinc oxide nanorods array exhibit excellent electron mobility and thus hold great potential as photoanode for photoelelctrochemical water splitting. However, the poor absorption of visible light and the prominent surface recombination hider the performance improvement. In this work, Au nanoparticles and aluminium oxide were deposited onto the surface of ZnO nanorods to improve the PEC performance. The localized surface plasmon resonance of Au NPs could expand the absorption spectrum to visible region. Simultaneously, the surface of passivation with Au NPs and Al2O3 largely suppressed the photogenerated electron-hole recombination. As a result, the optimal solar-to-hydrogen efficiency of ZnO/Au/Al2O3 with 5 cycles was 6.7 times that of pristine ZnO, ascribed to the synergistic effect of SPR and surface passivation. This research reveals that the synergistic effect could be used as an important method to design efficient photoanodes for photoelectrochemical devices. PMID:27443692

  15. ZnO nanorod/porous silicon nanowire hybrid structures as highly-sensitive NO2 gas sensors at room temperature.

    PubMed

    Liao, Jiecui; Li, Zhengcao; Wang, Guojing; Chen, Chienhua; Lv, Shasha; Li, Mingyang

    2016-02-01

    ZnO nanorod/porous silicon nanowire (ZnO/PSiNW) hybrids with three different structures as highly sensitive NO2 gas sensors were obtained. PSiNWs were first synthesized by metal-assisted chemical etching, and then seeded in three different ways. After that ZnO nanorods were grown on the seeded surface of PSiNWs using a hydrothermal procedure. ZnO/PSiNW hybrids showed excellent gas sensing performance for various NO2 concentrations (5-50 ppm) at room temperature, and the electrical resistance change rate reached as high as 35.1% when responding to 50 ppm NO2. The distinct enhancement was mainly attributed to the faster carrier transportation after combination, the increase in gas sensing areas and the oxygen vacancy (VO) concentration. Moreover, the p-type gas sensing behavior was explained by the gas sensing mechanism and the effect of VO concentration on gas sensing properties was also discussed concerning the photoluminescence (PL) spectra performance. PMID:26804157

  16. Synergistic Effect of Surface Plasmonic particles and Surface Passivation layer on ZnO Nanorods Array for Improved Photoelectrochemical Water Splitting

    PubMed Central

    Liu, Yichong; Yan, Xiaoqin; Kang, Zhuo; Li, Yong; Shen, Yanwei; Sun, Yihui; Wang, Li; Zhang, Yue

    2016-01-01

    One-dimensional zinc oxide nanorods array exhibit excellent electron mobility and thus hold great potential as photoanode for photoelelctrochemical water splitting. However, the poor absorption of visible light and the prominent surface recombination hider the performance improvement. In this work, Au nanoparticles and aluminium oxide were deposited onto the surface of ZnO nanorods to improve the PEC performance. The localized surface plasmon resonance of Au NPs could expand the absorption spectrum to visible region. Simultaneously, the surface of passivation with Au NPs and Al2O3 largely suppressed the photogenerated electron-hole recombination. As a result, the optimal solar-to-hydrogen efficiency of ZnO/Au/Al2O3 with 5 cycles was 6.7 times that of pristine ZnO, ascribed to the synergistic effect of SPR and surface passivation. This research reveals that the synergistic effect could be used as an important method to design efficient photoanodes for photoelectrochemical devices. PMID:27443692

  17. In situ plasma sputtering synthesis of ZnO nanorods-Ag nanoparticles hybrids and their application in non-enzymatic hydrogen peroxide sensing.

    PubMed

    Zhang, Dan; Zhang, Yuxia; Yang, Chi; Ge, Cunwang; Wang, Yuanhong; Wang, Hao; Liu, Hongying

    2015-08-21

    In this paper, ZnO nanorods-Ag nanoparticles hybrids were first synthesized via a facile, rapid, and in situ plasma sputtering method without using any silver precursor. The obtained materials were then characterized by scanning electron microscopy, high-resolution transmission electron microscopy, energy-dispersive x-ray spectroscopy, and cyclic voltammetry. Based on the electrochemical catalytic properties of the obtained nanohybrids, a non-enzymatic hydrogen peroxide biosensor was constructed by immobilizing the obtained ZnO nanorods-Ag nanoparticles hybrids on the surface of a glassy carbon electrode. Under optimal conditions, the resulting biosensor displayed a good response for H2O2 with a linear range of 0.2 to 12.8 mM, and a detection limit of 7.8 μM at a signal-to-noise ratio of 3. In addition, it exhibited excellent anti-interference ability and fast response. The current work provides a feasible platform to fabricate a variety of non-enzymatic biosensors. PMID:26225726

  18. In situ plasma sputtering synthesis of ZnO nanorods-Ag nanoparticles hybrids and their application in non-enzymatic hydrogen peroxide sensing

    NASA Astrophysics Data System (ADS)

    Zhang, Dan; Zhang, Yuxia; Yang, Chi; Ge, Cunwang; Wang, Yuanhong; Wang, Hao; Liu, Hongying

    2015-08-01

    In this paper, ZnO nanorods-Ag nanoparticles hybrids were first synthesized via a facile, rapid, and in situ plasma sputtering method without using any silver precursor. The obtained materials were then characterized by scanning electron microscopy, high-resolution transmission electron microscopy, energy-dispersive x-ray spectroscopy, and cyclic voltammetry. Based on the electrochemical catalytic properties of the obtained nanohybrids, a non-enzymatic hydrogen peroxide biosensor was constructed by immobilizing the obtained ZnO nanorods-Ag nanoparticles hybrids on the surface of a glassy carbon electrode. Under optimal conditions, the resulting biosensor displayed a good response for H2O2 with a linear range of 0.2 to 12.8 mM, and a detection limit of 7.8 μM at a signal-to-noise ratio of 3. In addition, it exhibited excellent anti-interference ability and fast response. The current work provides a feasible platform to fabricate a variety of non-enzymatic biosensors.

  19. Incorporating β-cyclodextrin with ZnO nanorods: a potentiometric strategy for selectivity and detection of dopamine.

    PubMed

    Elhag, Sami; Ibupoto, Zafar Hussain; Nur, Omer; Willander, Magnus

    2013-01-01

    We describe a chemical sensor based on a simple synthesis of zinc oxide nanorods (ZNRs) for the detection of dopamine molecules by a potentiometric approach. The polar nature of dopamine leads to a change of surface charges on the ZNR surface via metal ligand bond formation which results in a measurable electrical signal. ZNRs were grown on a gold-coated glass substrate by a low temperature aqueous chemical growth (ACG) method. Polymeric membranes incorporating β-cyclodextrin (β-CD) and potassium tetrakis (4-chlorophenyl) borate was immobilized on the ZNR surface. The fabricated electrodes were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The grown ZNRs were well aligned and exhibited good crystal quality. The present sensor system displays a stable potential response for the detection of dopamine in 10(-2) mol·L(-1) acetic acid/sodium acetate buffer solution at pH 5.45 within a wide concentration range of 1 × 10(-6) M(-1) × 10(-1) M, with sensitivity of 49 mV/decade. The electrode shows a good response time (less than 10 s) and excellent repeatability. This finding can contribute to routine analysis in laboratories studying the neuropharmacology of catecholamines. Moreover, the metal-ligand bonds can be further exploited to detect DA receptors, and for bio-imaging applications. PMID:24445413

  20. Thickness dependence of the MoO3 blocking layers on ZnO nanorod-inverted organic photovoltaic devices

    PubMed Central

    Wang, Mingjun; Li, Yuan; Huang, Huihui; Peterson, Eric D.; Nie, Wanyi; Zhou, Wei; Zeng, Wei; Huang, Wenxiao; Fang, Guojia; Sun, Nanhai; Zhao, Xingzhong; Carroll, David L.

    2011-01-01

    Organic solar cells based on vertically aligned zinc oxide nanorod arrays (ZNR) in an inverted structure of indium tin oxide (ITO)∕ZNR∕poly(3-hexylthiophene): (6,6)-phenyl C61 butyric acid methyl ester(P3HT:PCBM)∕MoO3∕aluminum(Al) were studied. We found that the optimum MoO3 layer thickness condition of 20 nm, the MoO3 can effectively decrease the probability of bimolecular recombination either at the Al interface or within the active layer itself. For this optimum condition we get a power conversion efficiency of 2.15%, a short-circuit current density of 9.02 mA∕cm2, an open-circuit voltage of 0.55V, and a fill factor of 0.44 under 100 mW∕cm2 irradiation. Our investigations also show that the highly crystallized ZNR can create short and continuous pathways for electron transport and increase the contact area between the ZNR and the organic materials. PMID:21464889

  1. An Electrochemical Glucose Sensor Based on Zinc Oxide Nanorods.

    PubMed

    Marie, Mohammed; Mandal, Sanghamitra; Manasreh, Omar

    2015-01-01

    A glucose electrochemical sensor based on zinc oxide (ZnO) nanorods was investigated. The hydrothermal sol-gel growth method was utilized to grow ZnO nanorods on indium tin oxide-coated glass substrates. The total active area of the working electrode was 0.3 × 0.3 cm2 where titanium metal was deposited to enhance the contact. Well aligned hexagonal structured ZnO nanorods with a diameter from 68 to 116 nm were obtained. The excitonic peak obtained from the absorbance spectroscopy was observed at ~370 nm. The dominant peak of Raman spectroscopy measurement was at 440 cm(-1), matching with the lattice vibration of ZnO. The uniform distribution of the GOx and Nafion membrane that has been done using spin coating technique at 4000 rotations per minute helps in enhancing the ion exchange and increasing the sensitivity of the fabricated electrochemical sensor. The amperometric response of the fabricated electrochemical sensor was 3 s. The obtained sensitivity of the fabricated ZnO electrochemical sensor was 10.911 mA/mM·cm2 and the lower limit of detection was 0.22 µM. PMID:26263988

  2. Alignment nature of ZnO nanowires grown on polished and nanoscale etched lithium niobate surface through self-seeding thermal evaporation method

    SciTech Connect

    Mohanan, Ajay Achath; Parthiban, R.; Ramakrishnan, N.

    2015-08-15

    Highlights: • ZnO nanowires were grown directly on LiNbO{sub 3} surface for the first time by thermal evaporation. • Self-alignment of the nanowires due to step bunching of LiNbO{sub 3} surface is observed. • Increased roughness in surface defects promoted well-aligned growth of nanowires. • Well-aligned growth was then replicated in 50 nm deep trenches on the surface. • Study opens novel pathway for patterned growth of ZnO nanowires on LiNbO{sub 3} surface. - Abstract: High aspect ratio catalyst-free ZnO nanowires were directly synthesized on lithium niobate substrate for the first time through thermal evaporation method without the use of a buffer layer or the conventional pre-deposited ZnO seed layer. As-grown ZnO nanowires exhibited a crisscross aligned growth pattern due to step bunching of the polished lithium niobate surface during the nanowire growth process. On the contrary, scratches on the surface and edges of the substrate produced well-aligned ZnO nanowires in these defect regions due to high surface roughness. Thus, the crisscross aligned nature of high aspect ratio nanowire growth on the lithium niobate surface can be changed to well-aligned growth through controlled etching of the surface, which is further verified through reactive-ion etching of lithium niobate. The investigations and discussion in the present work will provide novel pathway for self-seeded patterned growth of well-aligned ZnO nanowires on lithium niobate based micro devices.

  3. Performance enhancement of multiple-gate ZnO metal-oxide-semiconductor field-effect transistors fabricated using self-aligned and laser interference photolithography techniques

    PubMed Central

    2014-01-01

    The simple self-aligned photolithography technique and laser interference photolithography technique were proposed and utilized to fabricate multiple-gate ZnO metal-oxide-semiconductor field-effect transistors (MOSFETs). Since the multiple-gate structure could improve the electrical field distribution along the ZnO channel, the performance of the ZnO MOSFETs could be enhanced. The performance of the multiple-gate ZnO MOSFETs was better than that of the conventional single-gate ZnO MOSFETs. The higher the drain-source saturation current (12.41 mA/mm), the higher the transconductance (5.35 mS/mm) and the lower the anomalous off-current (5.7 μA/mm) for the multiple-gate ZnO MOSFETs were obtained. PMID:24948884

  4. Influence of ZnO seed layer precursor molar ratio on the density of interface defects in low temperature aqueous chemically synthesized ZnO nanorods/GaN light-emitting diodes

    NASA Astrophysics Data System (ADS)

    Alnoor, Hatim; Pozina, Galia; Khranovskyy, Volodymyr; Liu, Xianjie; Iandolo, Donata; Willander, Magnus; Nur, Omer

    2016-04-01

    Low temperature aqueous chemical synthesis (LT-ACS) of zinc oxide (ZnO) nanorods (NRs) has been attracting considerable research interest due to its great potential in the development of light-emitting diodes (LEDs). The influence of the molar ratio of the zinc acetate (ZnAc): KOH as a ZnO seed layer precursor on the density of interface defects and hence the presence of non-radiative recombination centers in LT-ACS of ZnO NRs/GaN LEDs has been systematically investigated. The material quality of the as-prepared seed layer as quantitatively deduced by the X-ray photoelectron spectroscopy is found to be influenced by the molar ratio. It is revealed by spatially resolved cathodoluminescence that the seed layer molar ratio plays a significant role in the formation and the density of defects at the n-ZnO NRs/p-GaN heterostructure interface. Consequently, LED devices processed using ZnO NRs synthesized with molar ratio of 1:5 M exhibit stronger yellow emission (˜575 nm) compared to those based on 1:1 and 1:3 M ratios as measured by the electroluminescence. Furthermore, seed layer molar ratio shows a quantitative dependence of the non-radiative defect densities as deduced from light-output current characteristics analysis. These results have implications on the development of high-efficiency ZnO-based LEDs and may also be helpful in understanding the effects of the ZnO seed layer on defect-related non-radiative recombination.

  5. Piezoelectric and opto-electrical properties of silver-doped ZnO nanorods synthesized by low temperature aqueous chemical method

    SciTech Connect

    Nour, E. S. Echresh, A.; Willander, M.; Nur, O.; Liu, Xianjie; Broitman, E.

    2015-07-15

    In this paper, we have synthesized Zn{sub 1−x}Ag{sub x}O (x = 0, 0.03, 0.06, and 0.09) nanorods (NRs) via the hydrothermal method at low temperature on silicon substrate. The characterization and comparison between the different Zn{sub 1−x}Ag{sub x}O samples, indicated that an increasing Ag concentration from x = 0 to a maximum of x = 0.09; All samples show a preferred orientation of (002) direction with no observable change of morphology. As the quantity of the Ag dopant was changed, the transmittances, as well as the optical band gap were decreased. X-ray photoelectron spectroscopy data clearly indicate the presence of Ag in ZnO crystal lattice. A nanoindentation-based technique was used to measure the effective piezo-response of different concentrations of Ag for both direct and converse effects. The value of the piezoelectric coefficient (d{sub 33}) as well as the piezo potential generated from the ZnO NRs and Zn{sub 1−x}Ag{sub x}O NRs was found to decrease with the increase of Ag fraction. The finding in this investigation reveals that Ag doped ZnO is not suitable for piezoelectric energy harvesting devices.

  6. Facile synthesis of ZnO/CuInS2 nanorod arrays for photocatalytic pollutants degradation.

    PubMed

    Yang, Yawei; Que, Wenxiu; Zhang, Xinyu; Xing, Yonglei; Yin, Xingtian; Du, Yaping

    2016-11-01

    Vertically-aligned ZnO nanorod arrays on a fluorine-doped tin oxide glass substrate were homogeneously coated with visible light active CuInS2 quantum dots by using a controllable electrophoretic deposition strategy. Compared with the pure ZnO nanorod arrays, the formation of high-quality ZnO/CuInS2 heterojunction with well-matched band energy alignment expanded the light absorption from ultraviolet to visible region and facilitated efficient charge separation and transportation, thus yielding remarkable enhanced photoelectrochemical performance and photocatalytic activities for methyl orange and 4-chlorophenol degradation. The ZnO/CuInS2 film with the deposition duration of 80min showed the highest degradation rate and photocurrent density (0.95mA/cm(2)), which was almost 6.33 times higher than that of the pure ZnO nanorod arrays film. The CuInS2 QDs sensitized ZnO nanorod arrays film was proved to be a superior structure for photoelectrochemical and photocatalytic applications due to the optimized CuInS2 loading and well-maintained one-dimensional nanostructure. PMID:27322900

  7. Low-Cost, Large-Area, Facile, and Rapid Fabrication of Aligned ZnO Nanowire Device Arrays.

    PubMed

    Cadafalch Gazquez, Gerard; Lei, Sidong; George, Antony; Gullapalli, Hemtej; Boukamp, Bernard A; Ajayan, Pulickel M; Ten Elshof, Johan E

    2016-06-01

    Well aligned nanowires of ZnO have been made with an electrospinning technique using zinc acetate precursor solutions. Employment of two connected parallel collector plates with a separating gap of 4 cm resulted in a very high degree of nanowire alignment. By adjusting the process parameters, the deposition density of the wires could be controlled. Field effect transistors were prepared by depositing wires between two gold electrodes on top of a heavily doped Si substrate covered with a 300 nm oxide layer. These devices showed good FET characteristics and photosensitivity under UV-illumination. The method provides a fast and scalable fabrication route for functional nanowire arrays with a high degree of alignment and control over nanowire spacing. PMID:27173007

  8. Changing the shape of ZnO nanostructures by controlling Zn vapor release: from tetrapod to bone-like nanorods

    NASA Astrophysics Data System (ADS)

    Hang Leung, Yu; Djurišić, Aleksandra B.; Gao, Ju; Xie, Mao Hai; Chan, Wai Kin

    2004-02-01

    Different morphologies of ZnO nanostructures were fabricated by changing the type of starting material (ZnO powder vs. ZnO nanoparticles, graphite vs. carbon nanotubes). The structure of deposited materials was investigated by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy and selected area electron diffraction. The obtained shapes and sizes of ZnO nanostructures were found to be strongly dependent on the type and quantity of starting materials, which control the release of Zn vapor and thusly control the diameter and shape of fabricated structures.

  9. Electrochemical growth of ZnO nanoplates

    NASA Astrophysics Data System (ADS)

    Illy, B.; Shollock, B. A.; MacManus-Driscoll, J. L.; Ryan, M. P.

    2005-02-01

    ZnO films were grown on polycrystalline Zn foil by cathodic electrodeposition in an aqueous zinc chloride/calcium chloride solution at 80 °C. Variation in the electrochemical parameters resulted in a variation in growth morphology from 1D (nanorods), 2D ('nanoplates') to 3D crystal growth. An as-received or mechanically polished substrate proved the most suitable substrate finish and allowed more highly aligned, dense structures to be grown; in contrast, electropolished substrates formed inhomogeneous deposits. Substrate annealing gave rise to large homogenous areas of nanorod deposition. Two-dimensional sheet growth was found to occur in conjunction with nanorods under specific electrochemical conditions. Hexagonal 'plates' approximately 50 nm in thickness and several microns in diameter were formed normal to the substrate.

  10. Enhanced piezoelectric properties of vertically aligned single-crystalline NKN nano-rod arrays

    NASA Astrophysics Data System (ADS)

    Kang, Min-Gyu; Oh, Seung-Min; Jung, Woo-Suk; Gyu Moon, Hi; Baek, Seung-Hyub; Nahm, Sahn; Yoon, Seok-Jin; Kang, Chong-Yun

    2015-05-01

    Piezoelectric materials capable of converting between mechanical and electrical energy have a great range of potential applications in micro- and nano-scale smart devices; however, their performance tends to be greatly degraded when reduced to a thin film due to the large clamping force by the substrate and surrounding materials. Herein, we report an effective method for synthesizing isolated piezoelectric nano-materials as means to relax the clamping force and recover original piezoelectric properties of the materials. Using this, environmentally friendly single-crystalline NaxK1-xNbO3 (NKN) piezoelectric nano-rod arrays were successfully synthesized by conventional pulsed-laser deposition and demonstrated to have a remarkably enhanced piezoelectric performance. The shape of the nano-structure was also found to be easily manipulated by varying the energy conditions of the physical vapor. We anticipate that this work will provide a way to produce piezoelectric micro- and nano-devices suitable for practical application, and in doing so, open a new path for the development of complex metal-oxide nano-structures.

  11. Enhanced piezoelectric properties of vertically aligned single-crystalline NKN nano-rod arrays

    PubMed Central

    Kang, Min-Gyu; Oh, Seung-Min; Jung, Woo-Suk; Gyu Moon, Hi; Baek, Seung-Hyub; Nahm, Sahn; Yoon, Seok-Jin; Kang, Chong-Yun

    2015-01-01

    Piezoelectric materials capable of converting between mechanical and electrical energy have a great range of potential applications in micro- and nano-scale smart devices; however, their performance tends to be greatly degraded when reduced to a thin film due to the large clamping force by the substrate and surrounding materials. Herein, we report an effective method for synthesizing isolated piezoelectric nano-materials as means to relax the clamping force and recover original piezoelectric properties of the materials. Using this, environmentally friendly single-crystalline NaxK1-xNbO3 (NKN) piezoelectric nano-rod arrays were successfully synthesized by conventional pulsed-laser deposition and demonstrated to have a remarkably enhanced piezoelectric performance. The shape of the nano-structure was also found to be easily manipulated by varying the energy conditions of the physical vapor. We anticipate that this work will provide a way to produce piezoelectric micro- and nano-devices suitable for practical application, and in doing so, open a new path for the development of complex metal-oxide nano-structures. PMID:25955763

  12. Enhanced piezoelectric properties of vertically aligned single-crystalline NKN nano-rod arrays.

    PubMed

    Kang, Min-Gyu; Oh, Seung-Min; Jung, Woo-Suk; Moon, Hi Gyu; Baek, Seung-Hyub; Nahm, Sahn; Yoon, Seok-Jin; Kang, Chong-Yun

    2015-01-01

    Piezoelectric materials capable of converting between mechanical and electrical energy have a great range of potential applications in micro- and nano-scale smart devices; however, their performance tends to be greatly degraded when reduced to a thin film due to the large clamping force by the substrate and surrounding materials. Herein, we report an effective method for synthesizing isolated piezoelectric nano-materials as means to relax the clamping force and recover original piezoelectric properties of the materials. Using this, environmentally friendly single-crystalline NaxK1-xNbO3 (NKN) piezoelectric nano-rod arrays were successfully synthesized by conventional pulsed-laser deposition and demonstrated to have a remarkably enhanced piezoelectric performance. The shape of the nano-structure was also found to be easily manipulated by varying the energy conditions of the physical vapor. We anticipate that this work will provide a way to produce piezoelectric micro- and nano-devices suitable for practical application, and in doing so, open a new path for the development of complex metal-oxide nano-structures. PMID:25955763

  13. Effects of growth pressure on morphology of ZnO nanostructures by chemical vapor transport

    NASA Astrophysics Data System (ADS)

    Babu, Eadi Sunil; Kim, Sungjin; Song, Jung-Hoon; Hong, Soon-Ku

    2016-08-01

    The effect of growth pressure on the morphology of the ZnO nanostructures in chemical vapor transport by using Zn powder and oxygen as source materials has been investigated. Highly uniform aligned ZnO nanorods or multifaceted tripod structures were grown depending on the growth pressure. The mechanism governing the morphology change was explained by the relative concentration of Zn vapor and supersaturation based on experimental observations. It was concluded that heterogeneous nucleation on the substrate is enhanced at low growth pressure, while homogeneous nucleation from vapor phase is enhanced at high growth pressure. The difference resulted in different morphology of ZnO nanostructures. ZnO nanorods grown at optimized condition were used for the fabrication of gas sensor for the detection of H2 gas.

  14. The influence of annealing temperature on the interface and photovoltaic properties of CdS/CdSe quantum dots sensitized ZnO nanorods solar cells.

    PubMed

    Qiu, Xiaofeng; Chen, Ling; Gong, Haibo; Zhu, Min; Han, Jun; Zi, Min; Yang, Xiaopeng; Ji, Changjian; Cao, Bingqiang

    2014-09-15

    Arrays of ZnO/CdS/CdSe core/shell nanocables with different annealing temperatures have been investigated for CdS/CdSe quantum dots sensitized solar cells (QDSSCs). CdS/CdSe quantum dots were synthesized on the surface of ZnO nanorods that serve as the scaffold via a simple ion-exchange approach. The uniform microstructure was verified by scanning electron microscope and transmission electron microscope. UV-Visible absorption spectrum and Raman spectroscopy analysis indicated noticeable influence of annealing temperature on the interface structural and optical properties of the CdS/CdSe layers. Particularly, the relationship between annealing temperatures and photovoltaic performance of the corresponding QDSSCs was investigated employing photovoltaic conversion, quantum efficiency and electrochemical impedance spectra. It is demonstrated that higher cell efficiency can be obtained by optimizing the annealing temperature through extending the photoresponse range and improving QD layer crystal quality. PMID:24998074

  15. Central composite design and genetic algorithm applied for the optimization of ultrasonic-assisted removal of malachite green by ZnO Nanorod-loaded activated carbon.

    PubMed

    Ghaedi, M; Azad, F Nasiri; Dashtian, K; Hajati, S; Goudarzi, A; Soylak, M

    2016-10-01

    Maximum malachite green (MG) adsorption onto ZnO Nanorod-loaded activated carbon (ZnO-NR-AC) was achieved following the optimization of conditions, while the mass transfer was accelerated by ultrasonic. The central composite design (CCD) and genetic algorithm (GA) were used to estimate the effect of individual variables and their mutual interactions on the MG adsorption as response and to optimize the adsorption process. The ZnO-NR-AC surface morphology and its properties were identified via FESEM, XRD and FTIR. The adsorption equilibrium isotherm and kinetic models investigation revealed the well fit of the experimental data to Langmuir isotherm and pseudo-second-order kinetic model, respectively. It was shown that a small amount of ZnO-NR-AC (with adsorption capacity of 20mgg(-1)) is sufficient for the rapid removal of high amount of MG dye in short time (3.99min). PMID:27318150

  16. The ordering alignment of gold nanorods in liquid crystals and its applications to polarization-sensitive SERS

    NASA Astrophysics Data System (ADS)

    Wang, Y. L.; Chen, L. Y.; Liu, Q. K.; Cai, F. H.; Qian, J.

    2016-01-01

    Gold nanorods (GNRs) were synthesized, coated with poly(ethylene glycol) (PEG) chains, and uniformly dispersed into the lyotropic nematic liquid crystal (LC) matrix by our proposed method. The GNRs-LC composites were found to exhibit good stability over days and have high density of GNRs. The extinction spectra of the composites were found to be polarization sensitive when the shearing force were applied, due to the alignment of GNRs driven by the LC molecules, which was also in accordance to the simulation results. A type of Raman reporter, 3,3'-diethylthiatricarbocyanine iodide (DTTC), was co-conjugated onto the GNRs with PEG molecules, and then incorporated into the LC matrix. Thus, its Raman signals could be enhanced by the localized surface plasmon resonance (LSPR) of the GNRs. These surface-enhanced Raman scattering (SERS) signals were found to be polarization sensitive when the shearing force was applied, due to the polarization sensitive enhancement of the local field of GNRs. The nanocomposites with tunable SPR peaks and SERS signals have potential applications in optoelectronic devices.

  17. Enhanced field electron emission from aligned diamond-like carbon nanorod arrays prepared by reactive ion beam etching

    NASA Astrophysics Data System (ADS)

    Zhao, Yong; Qin, Shi-Qiao; Zhang, Xue-Ao; Chang, Sheng-Li; Li, Hui-Hui; Yuan, Ji-Ren

    2016-05-01

    Homogeneous diamond-like carbon (DLC) films were deposited on Si supports by a pulsed filtered cathodic vacuum arc deposition system. Using DLC films masked by Ni nanoparticles as precursors, highly aligned diamond-like carbon nanorod (DLCNR) arrays were fabricated by the etching of inductively coupled radio frequency oxygen plasma. The as-prepared DLCNR arrays exhibit excellent field emission properties with a low turn-on field of 2.005 V μm‑1 and a threshold field of 4.312 V μm‑1, respectively. Raman spectroscopy and x-ray photoelectron spectroscopy were employed to determine the chemical bonding structural change of DLC films before and after etching. It is confirmed that DLC films have good connection with Si supports via the formation of the SiC phase, and larger conductive sp2 domains are formed in the as-etched DLC films, which play essential roles in the enhanced field emission properties for DLCNR arrays.

  18. Self-organized nanocomb of ZnO fabricated by Au-catalyzed vapor-phase transport

    NASA Astrophysics Data System (ADS)

    Xu, C. X.; Sun, X. W.; Dong, Z. L.; Yu, M. B.

    2004-10-01

    Based on a vapor-phase transport process, self-organized nanocomb structures of ZnO were fabricated on Au-coated Si substrate by employing a mixture of ZnO and graphite powders as source materials. The morphology of the product showed a ribbon-like stem and nanorod array aligned evenly along one side of the nanoribbon. It was found that the nanoribbon grew mainly along [ 1 0 1 bar 0 ] direction and the self-assembled branching nanorods grew epitaxially along [0 0 0 1] orientation from the (0 0 0 2) plane of the stem. The growth process was analyzed in detail.

  19. Plasmon enhanced CdS-quantum dot sensitized solar cell using ZnO nanorods array deposited with Ag nanoparticles as photoanode

    NASA Astrophysics Data System (ADS)

    Eskandari, M.; Ahmadi, V.; Yousefi rad, M.; Kohnehpoushi, S.

    2015-04-01

    CdS-quantum dot sensitized solar cell using ZnO nanorods (ZnO NRs) array deposited with Ag nanoparticles (Ag NPs) as photoanode was fabricated. Light absorption effect of Ag NPs on improvement of the cell performance was investigated. Performance improvement of metal nanoparticles (MNPs) was controlled by the structure design and architecture. Different decorations and densities of Ag NPs were utilized on the photoanode. Results showed that using 5% Ag NPs in the photoanode results in the increased efficiency, fill factor, and circuit current density from 0.28% to 0.60%, 0.22 to 0.29, and 2.18 mA/cm2 to 3.25 mA/cm2, respectively. Also, incident photon-to-current efficiencies (IPCE) results showed that cell performance improvement is related to enhanced absorption in the photoanode, which is because of the surface plasmonic resonance and light scattering of Ag NPs in the photoanode. Measurements of electrochemical impedance spectroscopy revealed that hole transfer kinetics increases with introduction of Ag NPs into photoanode. Also, it is shown that chemical capacitance increases with introduction of Ag NPs. Such increase can be attributed to the surface palsmonic resonance of Ag NPs which leads to absorption of more light in the photoanode and generation of more photoelectron in the photoanode.

  20. Arrays of ZnO nanorods decorated with Au nanoparticles as surface-enhanced Raman scattering substrates for rapid detection of trace melamine

    NASA Astrophysics Data System (ADS)

    Yi, Zao; Yi, Yong; Luo, Jiangshan; Li, Xibo; Xu, Xibin; Jiang, Xiaodong; Yi, Yougen; Tang, Yongjian

    2014-10-01

    In this paper, as a new, highly sensitive and uniform hybrid surface-enhanced Raman scattering (SERS) substrate, arrays of ZnO nanorods (ZnO-NRs) decorated with Au nanoparticles (Au-NPs) have been prepared. This hybrid substrate manifests high SERS sensitivity to melamine and a detection limit as low as 1.0×10-10 M (1.26 μg L-1). A maximum enhancement factor of 1.0×109 can be obtained with the ZnO NF-Au (sample 2) film. Au-NPs gaps in the array can create lots of SERS “hot spots” that mainly contribute to the high SERS sensitivity. Moreover, the supporting chemical enhancement effect of ZnO-NRs and the better enrichment effect ascribed to the large surface area of the substrate also help to achieve a lower detection limit. The promising advantages of easy sample pretreatment, short detection time and low cost makes the arrays of ZnO-NRs decorated with Au-NPs substrate a potential detection tool in the field of food safety.

  1. Facile fabrication of ZnO nanorods/ZnO nanosheet-spheres hybrid photoanode for dye-sensitized solar cells

    NASA Astrophysics Data System (ADS)

    Bai, Te; Xie, Yahong; Zhang, Chunyang; Zhang, Yun; Hu, Jing; Wang, Jide

    2015-09-01

    Zinc oxide (ZnO) nanorods (ZNRs) and hierarchical ZnO nanosheet-spheres (ZNSs) were prepared through a simple aqueous chemical growth process and a low-temperature solid-phase method, respectively. The prepared ZNRs and ZNSs were mixed to obtain a composite structure by using a circumference oscillator. After structure and morphology characterizations via X-ray diffraction and scanning electron microscopy, the mixture of ZNRs and ZNSs was used as a photoanode in dye-sensitized solar cells (DSSCs). Photovoltaic performance and optimal mixture ratio were investigated. The results indicated that the photovoltaic properties of DSSCs depended on the microstructures, morphologies and mixture ratios of the electrodes. In addition, the mixture of ZNRs and ZNSs (molar ratio of 1:12) yielded an overall light conversion efficiency of 6.02%, with a fill factor of 65.0%, a short-circuit current of 13.49 mA/cm2, and an open-circuit voltage of 0.69 V. These values are higher than those of pure ZNRs or pure ZNSs.

  2. Photoelectrochemical cell/dye-sensitized solar cell tandem water splitting systems with transparent and vertically aligned quantum dot sensitized TiO2 nanorod arrays

    NASA Astrophysics Data System (ADS)

    Shin, Kahee; Yoo, Ji-Beom; Park, Jong Hyeok

    2013-03-01

    The present work reports fabrication of vertically aligned CdS sensitized TiO2 nanorod arrays grown on transparent conducting oxide substrate with high transparency as a photoanode in photoelectrochemical cell for water splitting. To realize an unassisted water splitting system, the photoanode and dye-sensitized solar cell tandem structures are tried and their electrochemical behaviors are also investigated. The hydrothermally grown TiO2 nanorod arrays followed by CdS nanoparticle decoration can improve the light absorption of long wavelength light resulting in increased photocurrent density. Two different techniques (electrodeposition and spray pyrolysis deposition) of CdS nanoparticle sensitization are carried out and their water splitting behaviors in the tandem cell are compared.

  3. Chemical protection of ZnO nanorods at ultralow pH To form a hierarchical BiFeO3/ZnO core-shell structure.

    PubMed

    Loh, Leonard; Briscoe, Joe; Dunn, Steve

    2015-01-14

    ZnO is an interesting material for photoactive and optoelectronic devices because of the wide range of available nanostructures and advantageous semiconducting properties. However, a significant drawback of ZnO is the low stability in high or low pH solutions. This has limited the development of ZnO core-shell materials for use in Z-scheme systems or photovoltaics, where any secondary phase is produced using chemical solution processing at low or high pH. Here, we show a simple process to produce an organic capping layer of 3-aminopropyltriethoxysilane that can successfully stabilize nanostructured ZnO for processing below pH 1. We demonstrate that this process can be used to produce a ZnO-BiFeO3 (BFO) core-shell structure by a sol-gel process. Using a range of physical and analytical techniques, we show that BFO is highly crystalline and produces a conformal coating with a thickness of 2.5 nm. X-ray photoelectron spectroscopy and X-ray diffraction confirm the phase and expected chemical composition of BFO. Finally we are able to demonstrate that diodes produced using the ZnO-BFO core-shell structure have improved performance with a rectification ratio at ±3 V of 2800 because of the reduction in reverse current typically associated with surface recombination on ZnO. Our process opens a route to producing a range of hitherto prohibited ZnO core-shell structures that may have applications ranging from photovoltaic devices to core-shell photocatalysts. PMID:25247787

  4. Spatially branched hierarchical ZnO nanorod-TiO2 nanotube array heterostructures for versatile photocatalytic and photoelectrocatalytic applications: towards intimate integration of 1D-1D hybrid nanostructures.

    PubMed

    Xiao, Fang-Xing; Hung, Sung-Fu; Tao, Hua Bing; Miao, Jianwei; Yang, Hong Bin; Liu, Bin

    2014-12-21

    Hierarchically ordered ZnO nanorods (NRs) decorated nanoporous-layer-covered TiO2 nanotube array (ZnO NRs/NP-TNTAs) nanocomposites have been prepared by an efficient, two-step anodization route combined with an electrochemical deposition strategy, by which monodispersed one-dimensional (1D) ZnO NRs were uniformly grown on the framework of NP-TNTAs. The crystal phases, morphologies, optical properties, photocatalytic as well as photoelectrocatalytic performances of the well-defined ZnO NRs/NP-TNTAs heterostructures were systematically explored to clarify the structure-property correlation. It was found that the ZnO NRs/NP-TNTAs heterostructure exhibits significantly enhanced photocatalytic and photoelectrocatalytic performances, along with favorable photostability toward degradation of organic pollutants under UV light irradiation, as compared to the single component counterparts. The remarkably enhanced photoactivity of ZnO NRs/NP-TNTAs heterostructure is ascribed to the intimate interfacial integration between ZnO NRs and NP-TNTAs substrate imparted by the unique spatially branched hierarchical structure, thereby contributing to the efficient transfer and separation of photogenerated electron-hole charge carriers. Moreover, the specific active species during the photocatalytic process was unambiguously determined and photocatalytic mechanism was tentatively presented. It is anticipated that our work could provide new insights for the construction of various hierarchical 1D-1D hybrid nanocomposites for extensive photocatalytic applications. PMID:25363649

  5. Direct synthesis of vertically aligned ZnO nanowires on FTO substrates using a CVD method and the improvement of photovoltaic performance

    PubMed Central

    2012-01-01

    In this work, we report a direct synthesis of vertically aligned ZnO nanowires on fluorine-doped tin oxide-coated substrates using the chemical vapor deposition (CVD) method. ZnO nanowires with a length of more than 30 μm were synthesized, and dye-sensitized solar cells (DSSCs) based on the as-grown nanowires were fabricated, which showed improvement of the device performance compared to those fabricated using transferred ZnO nanowires. Dependence of the cell performance on nanowire length and annealing temperature was also examined. This synthesis method provided a straightforward, one-step CVD process to grow relatively long ZnO nanowires and avoided subsequent nanowire transfer process, which simplified DSSC fabrication and improved cell performance. PMID:22673046

  6. Two-stage epitaxial growth of vertically-aligned SnO2 nano-rods on(001) ceria

    DOE PAGESBeta

    Solovyov, Vyacheslav F.; Wu, Li-jun; Rupich, Martin W.; Sathyamurthy, Srivatsan; Li, Xiaoping; Li, Qiang

    2014-09-20

    Growth of high-aspect ratio oriented tin oxide, SnO2, nano-rods is complicated by a limited choice of matching substrates. We show that a (001) cerium oxide, CeO2, surface uniquely enables epitaxial growth of tin-oxide nano-rods via a two-stage process. First, (100) oriented nano-wires coat the ceria surface by lateral growth, forming a uniaxially-textured SnO2 deposit. Second, vertical SnO2nano-rods nucleate on the deposit by homoepitaxy. We demonstrate growth of vertically oriented 1-2 μm long nano-rods with an average diameter of ≈20 nm.

  7. Two-stage epitaxial growth of vertically-aligned SnO2 nano-rods on (001) ceria

    SciTech Connect

    Solovyov, VF; Wu, LJ; Rupich, MW; Sathyamurthy, S; Li, XP; Li, Q

    2014-12-15

    Growth of high-aspect ratio oriented tin oxide, SnO2, nano-rods is complicated by a limited choice of matching substrates. We show that a (001) cerium oxide, CeO2, surface uniquely enables epitaxial growth of tin-oxide nano-rods via a two-stage process. First, (100) oriented nano-wires coat the ceria surface by lateral growth, forming a uniaxially-textured SnO2 deposit. Second, vertical SnO2 nano-rods nucleate on the deposit by homoepitaxy. We demonstrate growth of vertically oriented 1-2 mu m long nano-rods with an average diameter of approximate to 20 nm. 2014 Elsevier B.V. All rights reserved.

  8. Watching single gold nanorods grow.

    PubMed

    Wei, Zhongqing; Qi, Hua; Li, Min; Tang, Bochong; Zhang, Zhengzheng; Han, Ruiling; Wang, Jiaojiao; Zhao, Yuliang

    2012-05-01

    The consecutive evolution process of single gold nanorods is monitored using atomic force microscopy (AFM). The single-crystal gold nanorods investigated are grown directly on surfaces to which gold seed particles are covalently linked. The growth kinetics for single nanorods is derived from the 3D information recorded by AFM. A better understanding of the seed-mediated growth mechanism may ultimately lead to the direct growth of aligned nanorods on surfaces. PMID:22378704

  9. Vertically aligned ZnO@CuS@PEDOT core@shell nanorod arrays decorated with MnO₂ nanoparticles for a high-performance and semi-transparent supercapacitor electrode.

    PubMed

    Rodríguez-Moreno, Jorge; Navarrete-Astorga, Elena; Dalchiele, Enrique A; Schrebler, Ricardo; Ramos-Barrado, José R; Martín, Francisco

    2014-05-30

    Hybrid nano-architectures with high electrochemical performance for supercapacitors have been designed by growing hierarchical ZnO NRs@CuS@PEDOT@MnO2 core@shell heterostructured nanorod arrays on ITO/glass substrates. This hybrid nano-structured electrode exhibits excellent electrochemical performance, with a high specific areal capacitance of 19.85 mF cm(-2), good rate capability, cycling stability and diffused coloured transparency. PMID:24756158

  10. Structural and Luminescence Features of Lithium-Doped p-Type Film-Like ZnO Nanorods.

    PubMed

    Ko, Wonbae; Lee, Sanghyo; Hong, Jin Pyo

    2015-11-01

    We report the structural and optical characteristics of p-type lithium (Li)-doped ZnO film-like nano-structures prepared by utilizing a simple hydro-thermal method in an aqueous solution at a low temperature (< 90 degrees C). The diameters and densities of the Li-doped ZnO nanostructures were controlled by adjusting the molar concentration. A relatively high molar concentration resulted in hexagonal and flat surface-shaped ZnO nanostructures. In addition, a post-annealing process in the range of 400 to 600 degrees C effectively leads to the incorporation of lithium dopant as an acceptor, resulting in optical p-type behavior. The p-type features of synthesized Li-doped ZnO nanostructures were analyzed using a photoluminescence measurement using a He-Cd laser as an excitation source at 10 K. Closer investigation of the fine donor- and acceptor-bound exciton emission peaks from the low temperature PL spectra revealed the occurrence of several peaks related to free excitons (FX), excitons bound to acceptor (A(0)X), free electron to the acceptor transition peak (FA), and its LO phonon replicas. PMID:26726574

  11. High performance of Mn-doped CdSe quantum dot sensitized solar cells based on the vertical ZnO nanorod arrays

    NASA Astrophysics Data System (ADS)

    Hou, Juan; Zhao, Haifeng; Huang, Fei; Jing, Qun; Cao, Haibin; Wu, Qiang; Peng, Shanglong; Cao, Guozhong

    2016-09-01

    Doping transition metal ions Mn2+ to semiconductor quantum dots (QDs) are extremely interesting for the development of photovoltaic devices. Quantum dot sensitized solar cells (QDSCs) are able to show promising power conversion efficiencies (PCE) by employing Mn2+ doped QDs. Herein we achieve effective CdS/Mnsbnd CdSe/ZnS QDs co-sensitized vertical ZnO nanorod arrays film that provides an appreciable enhancement in photovoltaic performance. The measured PCE of the solar cells with Mn2+ doped CdSe QDs is 4.14%, which is higher than the efficiency of 2.91% for the solar cells without Mn2+ or a ∼42% increase. The improvement in PCE is ascribed to a higher open-circuit voltage (Voc = 0.74 V) and a superior short-circuit current density (Jsc = 12.6 mA cm-2) with the introduction of Mn2+ into CdSe QDs. The enhancement seen with Mn2+ doped CdSe QDs are investigated and explained by the fact that the enhanced light absorption and reduced charge recombination by the formation of Mnsbnd CdSe passivation layer covering the QDs.

  12. Synthesis of ZnO nanorods and their application in the construction of a nanostructure-based electrochemical sensor for determination of levodopa in the presence of carbidopa.

    PubMed

    Molaakbari, Elahe; Mostafavi, Ali; Beitollahi, Hadi; Alizadeh, Reza

    2014-09-01

    A novel carbon paste electrode modified with ZnO nanorods and 5-(4'-amino-3'-hydroxy-biphenyl-4-yl)-acrylic acid (3,4'-AAZCPE) was fabricated. The electrochemical study of the modified electrode, as well as its efficiency for the electrocatalytic oxidation of levodopa, is described. The electrode was employed to study the electrocatalytic oxidation of levodopa, using cyclic voltammetry (CV), chronoamperometry (CHA), and square-wave voltammetry (SWV) as diagnostic techniques. It has been found that the oxidation of levodopa at the surface of the modified electrode occurs at a potential of about 370 mV less positive than that of an unmodified carbon paste electrode. The SWV results exhibit a linear dynamic range from 1.0 × 10(-7) M to 7.0 × 10(-5) M and a detection limit of 3.5 × 10(-8) M for levodopa. In addition, this modified electrode was used for the simultaneous determination of levodopa and carbidopa. Finally, the modified electrode was used for the determination of levodopa and carbidopa in some real samples. PMID:25014312

  13. Multiplexed enzyme-free electrochemical immunosensor based on ZnO nanorods modified reduced graphene oxide-paper electrode and silver deposition-induced signal amplification strategy.

    PubMed

    Sun, Guoqiang; Zhang, Lina; Zhang, Yan; Yang, Hongmei; Ma, Chao; Ge, Shenguang; Yan, Mei; Yu, Jinghua; Song, Xianrang

    2015-09-15

    Herein, an origami multiplexed enzyme-free electrochemical (EC) immunodevice is developed for the first time. Typically, ZnO nanorods (ZNRs) modified reduced graphene oxide (rGO)-paper electrode is used as a sensor platform, in which rGO improves the electronic transmission rate and ZNRs provide abundant sites for capture probes binding. Furthermore, by combining the large surface area of rGO and high catalytic activity of bovine serum protein (BSA)-stabilized silver nanoparticles (Ag@BSA) toward H2O2 reduction, rGO/Ag@BSA composites can be used as an excellent signal labels. The current signal is generated from the reduction of H2O2 and further amplified by a subsequent signal labels-promoted deposition of silver. Under optimal conditions, the proposed immunoassays exhibit excellent precision, high sensitivity and a wide linear range of 0.002-120 mIU mL(-1) for human chorionic gonadotropin, 0.001-110 ng mL(-1) for prostate-specific antigen, and 0.001-100 ng mL(-1) for carcinoembryonic antigen. The results for real sample analysis demonstrate that the newly constructed immunosensor arrays provide a simple and cost-effective method for clinical applications. PMID:25884731

  14. Mechanical and piezoelectric properties of zinc oxide nanorods grown on conductive textile fabric as an alternative substrate

    NASA Astrophysics Data System (ADS)

    Khan, Azam; Hussain, Mushtaque; Nur, Omer; Willander, Magnus

    2014-08-01

    The present research is devoted to understanding the mechanism and causes of variation in the piezoelectric potential generated from vertically aligned zinc oxide (ZnO) nanorods (NRs), which were grown on a conductive textile fabric as an alternative substrate by using the aqueous chemical growth method. The piezoelectric voltage was harvested from vertically aligned ZnO NRs having different physical parameters by using atomic force microscopy in contact mode and the variation in the generated piezoelectricity was investigated. The generated output potential indicates that different physical parameters such aspect ratio, crystal size and lattice internal crystal strain have a strong influence on the piezoelectric properties of vertically aligned ZnO NRs, which were grown on a textile fabric. Presented results indicate that textiles can be used as an alternative substrate just like the other conventional substrates, because our results are similar/better than many reported works on conventional substrates.

  15. Highly selective electrodeposition of sub-10 nm crystalline noble metallic nanorods inside vertically aligned multiwall carbon nanotubes.

    PubMed

    Wang, Xuyang; Wang, Ranran; Wu, Qiang; Zhang, Xiaohua; Yang, Zhaohui; Guo, Jun; Chen, Muzi; Tang, Minghua; Cheng, Yajun; Chu, Haibin

    2016-07-01

    In this paper crystalline noble metallic nanorods including Au and Ag with sub-10 nm diameter, are encapsulated within prealigned and open-ended multiwall carbon nanotubes (MWCNTs) through an electrodeposition method. As the external surface of CNTs has been insulated by the epoxy the CNT channel becomes the only path for the mass transport as well as the nanoreactor for the metal deposition. Highly crystallized Au and Ag2O nanorods parallel to the radial direction of CNTs are confirmed by high-resolution transmission electron microscopy, energy dispersive x-ray spectroscopy and x-ray powder diffraction spectroscopy. The Ag2O nanorods are formed by air oxidation on the Ag metals and show a single crystalline structure with (111) planes. The Au nanorods exhibit a complex crystalline structure including twin-crystal and lattice dislocation with (111) and (200) planes. These crystalline noble metallic nanostructures may have important applications for nanocatalysts for fuel cells as well as nanoelectronic and nanophotonic devices. This method is deemed to benefit the precise deposition of other crystalline nanostructures inside CNTs with a small diameter. PMID:27240546

  16. Highly selective electrodeposition of sub-10 nm crystalline noble metallic nanorods inside vertically aligned multiwall carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Wang, Xuyang; Wang, Ranran; Wu, Qiang; Zhang, Xiaohua; Yang, Zhaohui; Guo, Jun; Chen, Muzi; Tang, Minghua; Cheng, Yajun; Chu, Haibin

    2016-07-01

    In this paper crystalline noble metallic nanorods including Au and Ag with sub-10 nm diameter, are encapsulated within prealigned and open-ended multiwall carbon nanotubes (MWCNTs) through an electrodeposition method. As the external surface of CNTs has been insulated by the epoxy the CNT channel becomes the only path for the mass transport as well as the nanoreactor for the metal deposition. Highly crystallized Au and Ag2O nanorods parallel to the radial direction of CNTs are confirmed by high-resolution transmission electron microscopy, energy dispersive x-ray spectroscopy and x-ray powder diffraction spectroscopy. The Ag2O nanorods are formed by air oxidation on the Ag metals and show a single crystalline structure with (111) planes. The Au nanorods exhibit a complex crystalline structure including twin-crystal and lattice dislocation with (111) and (200) planes. These crystalline noble metallic nanostructures may have important applications for nanocatalysts for fuel cells as well as nanoelectronic and nanophotonic devices. This method is deemed to benefit the precise deposition of other crystalline nanostructures inside CNTs with a small diameter.

  17. Large-scale fabrication of vertically aligned ZnO nanowire arrays

    DOEpatents

    Wang, Zhong Lin; Hu, Youfan; Zhang, Yan; Xu, Chen; Zhu, Guang

    2014-09-09

    A generator includes a substrate, a first electrode layer, a dense plurality of vertically-aligned piezoelectric elongated nanostructures, an insulating layer and a second electrode layer. The substrate has a top surface and the first electrode layer is disposed on the top surface of the substrate. The dense plurality of vertically-aligned piezoelectric elongated nanostructures extends from the first electrode layer. Each of the nanostructures has a top end. The insulating layer is disposed on the top ends of the nanostructures. The second electrode layer is disposed on the non-conductive layer and is spaced apart from the nanostructures.

  18. Comparative study of ultraviolet detectors based on ZnO nanostructures grown on different substrates

    NASA Astrophysics Data System (ADS)

    Abdulgafour, H. I.; Hassan, Z.; Ahmed, N. M.; Yam, F. K.

    2012-10-01

    Pd/ZnO/Pd metal-semiconductor-metal photodetectors have been successfully fabricated using a variety of high-quality ZnO nanostructures. The nanostructures used included well-aligned nanorods, tetrapod-like nanorods, and hair-like nanowires and were synthesized on Si (100), porous silicon (PS/Si), and quartz substrates, respectively, using a catalyst-free vapor-solid mechanism for comparison. The morphological, structural, and optical properties of these nanostructures were investigated. Upon illumination with ultraviolet light (365 nm), the responsivity values of the fabricated photodetectors on PS/Si, Si, and quartz substrates were 0.22, 0.073, and 0.053 A/W, which correspond to quantum efficiencies of 85%, 28%, and 20%, respectively, at an applied bias of 5 V. The present study demonstrated that ZnO nanowires/PS exhibited a relatively fast photoresponse, with a rise time of 0.089 s and fall time of 0.085 s. The ZnO nanorods/Si and ZnO nanotetrapods/quartz exhibited a slow response, with rise times of 0.128 and 0.194 s and fall times of 0.362 and 0.4 s, respectively. The study suggests that the response time of the ZnO nanostructures to ultraviolet exposure is dependent on the type of substrate used. Results show that these nanostructures are suitable for sensing applications.

  19. X-ray photoelectron spectroscopy study of energy-band alignments of ZnO on buffer layer Lu2O3

    NASA Astrophysics Data System (ADS)

    Chen, Shanshan; Pan, Xinhua; Xu, Chenxiao; Huang, Jingyun; Ye, Zhizhen

    2016-02-01

    Lu2O3 was used as the buffer layer of the epitaxy of ZnO film on Si substrate by plasma-assisted molecular beam epitaxy. X-ray photoelectron spectroscopy was used to determine the band alignment at ZnO/Lu2O3 interface. The conduction band offset (CBO) and valence band offset (VBO) of the ZnO/Lu2O3 heterojunction are calculated to be 1.77 eV and 0.66 eV, respectively, with a type-I band alignment. And the ratio of CBO and VBO (ΔEc / ΔEv) is estimated to be about 2.68. The large ΔEv and ΔEc reveal that Lu2O3 is an ideal barrier layer in Si-based ZnO optoelectronic devices.

  20. An efficient broadband and omnidirectional light-harvesting scheme employing a hierarchical structure based on a ZnO nanorod/Si3N4-coated Si microgroove on 5-inch single crystalline Si solar cells

    NASA Astrophysics Data System (ADS)

    Lin, Chin-An; Lai, Kun-Yu; Lien, Wei-Cheng; He-Hau, Jr.

    2012-09-01

    We employ a ZnO nanorod/Si3N4-coated Si microgroove-based hierarchical structure (HS) for a light-harvesting scheme in 5 inch single crystalline Si solar cells. ZnO nanorods and Si microgrooves were fabricated by a simple and scalable aqueous process. The excellent light-harvesting characteristics of the HS, such as broadband working ranges and omnidirectionality have been demonstrated using external quantum efficiencies and reflectance measurements. The solar cells with the hierarchical surface exhibit excellent photovoltaic characteristics, i.e., a short-circuit current (JSC) of 38.45 mA cm-2, open-circuit voltage of 609 mV and conversion efficiency of 14.04%. As incident angles increase from 0° to 60°, only 5.3% JSC loss is achieved by employing the hierarchical surface, demonstrating the enhanced omnidirectional photovoltaic performances, also confirmed by the theoretical analysis. A viable scheme for broadband and omnidirectional light harvesting using the HS employing microscale/nanoscale surface textures on single crystalline Si solar cells has been demonstrated.We employ a ZnO nanorod/Si3N4-coated Si microgroove-based hierarchical structure (HS) for a light-harvesting scheme in 5 inch single crystalline Si solar cells. ZnO nanorods and Si microgrooves were fabricated by a simple and scalable aqueous process. The excellent light-harvesting characteristics of the HS, such as broadband working ranges and omnidirectionality have been demonstrated using external quantum efficiencies and reflectance measurements. The solar cells with the hierarchical surface exhibit excellent photovoltaic characteristics, i.e., a short-circuit current (JSC) of 38.45 mA cm-2, open-circuit voltage of 609 mV and conversion efficiency of 14.04%. As incident angles increase from 0° to 60°, only 5.3% JSC loss is achieved by employing the hierarchical surface, demonstrating the enhanced omnidirectional photovoltaic performances, also confirmed by the theoretical analysis. A viable

  1. Plasmon enhanced fluorescence studies from aligned gold nanorod arrays modified with SiO2 spacer layers

    NASA Astrophysics Data System (ADS)

    Damm, Signe; Fedele, Stefano; Murphy, Antony; Holsgrove, Kristina; Arredondo, Miryam; Pollard, Robert; Barry, James N.; Dowling, Denis P.; Rice, James H.

    2015-05-01

    Here, we demonstrate that quasi self-standing Au nanorod arrays prepared with plasma polymerisation deposited SiO2 dielectric spacers support surface enhanced fluorescence (SEF) while maintaining high signal reproducibility. We show that it is possible to find a balance between enhanced radiative and non-radiative decay rates at which the fluorescent intensity is maximized. The SEF signal optimised with a 30 nm spacer layer thickness showed a 3.5-fold enhancement with a signal variance of <15% thereby keeping the integrity of the nanorod array. We also demonstrate the decreased importance of obtaining resonance conditions when localized surface plasmon resonance is positioned within the spectral region of Au interband transitions. Procedures for further increasing the SEF enhancement factor are also discussed.

  2. Plasmon enhanced fluorescence studies from aligned gold nanorod arrays modified with SiO{sub 2} spacer layers

    SciTech Connect

    Damm, Signe; Fedele, Stefano; Rice, James H.; Murphy, Antony; Holsgrove, Kristina; Arredondo, Miryam; Pollard, Robert; Barry, James N.; Dowling, Denis P.

    2015-05-04

    Here, we demonstrate that quasi self-standing Au nanorod arrays prepared with plasma polymerisation deposited SiO{sub 2} dielectric spacers support surface enhanced fluorescence (SEF) while maintaining high signal reproducibility. We show that it is possible to find a balance between enhanced radiative and non-radiative decay rates at which the fluorescent intensity is maximized. The SEF signal optimised with a 30 nm spacer layer thickness showed a 3.5-fold enhancement with a signal variance of <15% thereby keeping the integrity of the nanorod array. We also demonstrate the decreased importance of obtaining resonance conditions when localized surface plasmon resonance is positioned within the spectral region of Au interband transitions. Procedures for further increasing the SEF enhancement factor are also discussed.

  3. Antifouling properties of zinc oxide nanorod coatings.

    PubMed

    Al-Fori, Marwan; Dobretsov, Sergey; Myint, Myo Tay Zar; Dutta, Joydeep

    2014-01-01

    In laboratory experiments, the antifouling (AF) properties of zinc oxide (ZnO) nanorod coatings were investigated using the marine bacterium Acinetobacter sp. AZ4C, larvae of the bryozoan Bugula neritina and the microalga Tetraselmis sp. ZnO nanorod coatings were fabricated on microscope glass substrata by a simple hydrothermal technique using two different molar concentrations (5 and 10 mM) of zinc precursors. These coatings were tested for 5 h under artificial sunlight (1060 W m(-2) or 530 W m(-2)) and in the dark (no irradiation). In the presence of light, both the ZnO nanorod coatings significantly reduced the density of Acinetobacter sp. AZ4C and Tetraselmis sp. in comparison to the control (microscope glass substratum without a ZnO coating). High mortality and low settlement of B. neritina larvae was observed on ZnO nanorod coatings subjected to light irradiation. In darkness, neither mortality nor enhanced settlement of larvae was observed. Larvae of B. neritina were not affected by Zn(2+) ions. The AF effect of the ZnO nanorod coatings was thus attributed to the reactive oxygen species (ROS) produced by photocatalysis. It was concluded that ZnO nanorod coatings effectively prevented marine micro and macrofouling in static conditions. PMID:25115521

  4. Application of ZnO nanorods loaded on activated carbon for ultrasonic assisted dyes removal: Experimental design and derivative spectrophotometry method.

    PubMed

    Ansari, Fatemeh; Ghaedi, Mehrorang; Taghdiri, Mehdi; Asfaram, Arash

    2016-11-01

    A method based on application of ZnO nanorods loaded on activated carbon (ZnO-NRs-AC) for adsorption of Bromocresol Green (BCG) and Eosin Y (EY) accelerated by ultrasound was described. The present material was synthesized under ultrasound assisted wet-chemical method and subsequently was characterized by FE-SEM, TEM, BET and XRD analysis. The extent of contribution of conventional variables like pH (2.0-10.0), BCG concentration (4-20mgL(-1)), EY concentration (3-23mgL(-1)), adsorbent dosage (0.01-0.03g), sonication time (1-5min) and centrifuge time (2-6min) as main and interaction part were investigated by central composite design under response surface methodology. Analysis of variance (ANOVA) was adapted to experimental data and guide the best operational conditions mass by set at 6.0, 9mgL(-1), 10mgL(-1), 0.02g, 4 and 4min for pH, BCG concentration, EY concentration, adsorbent dosage, sonication and centrifuge time, respectively. At these specified conditions dye adsorption efficiency was higher than 99.5%. The suitability and well prediction of optimum point was tested by conducting five experiments and respective results revel that RSD% was lower than 3% and high quality of fitting was confirmed by t-test. The experimental data were best fitted in Langmuir isotherm equation and the removal followed pseudo second order kinetics. The experimentally obtained maximum adsorption capacities were estimated as 57.80 and 61.73mgg(-1) of ZnO-NRs-AC for BCG and EY respectively from binary dye solutions. The mechanism of removal was explained by boundary layer diffusion via intraparticle diffusion. PMID:27245971

  5. Effects of electrical and optical properties of thickness condition of ZnO nanorod array layer for efficient electrochemical luminescence cell device

    NASA Astrophysics Data System (ADS)

    Choi, Hye Su; Chansri, Pakpoom; Sung, Youl Moon

    2016-02-01

    In this paper, we report on electrochemical luminescence (ECL) cells with a ZnO nanorod (ZNR) layer. The investigated ECL cells were composed of F-doped SnO2 (FTO) glass/Ru(II)/ZNRs/FTO glass, which used a ZNR layer as an electrode and the Ru(II) complex [Ru(bpy)32+] as a light-emitting material. The ECL cells were fabricated by changing the thickness of ZNRs from 5 to 12.5 µm. The luminescence property of the ECL cells was strongly affected by the variation in the thickness of the ZNR layer. The threshold voltage for the light emission from the ECL cells was 2 V for 10 µm thick ZNRs, which was lower than that of the thickness of the ECL cells without a ZNR layer. Also, the intensity of luminance from the ECL cells with ZNRs was much higher than that from the ECL cells without ZNRs at the same operating voltage. The efficiency of the ECL cells without ZNRs measured at 3 V was 0.0049 lm/W, while those of the ECL cells with ZNRs were 0.0121, 0.0157, 0.0354, and 0.024 lm/W for the ZNRs layer thicknesses 5, 7.5, 10, and 12.5 µm, respectively. However, the peak light intensity at the wavelength was 623 nm which had not affected the all ZNRs thicknesses. The best lifetime of the ECL cells with these thicknesses was 40 min for ZNRs 10 µm. The use of the ZNR layer in the ECL cells significantly improves the luminescence performance.

  6. Photocatalytic paper using zinc oxide nanorods

    NASA Astrophysics Data System (ADS)

    Baruah, Sunandan; Jaisai, Mayuree; Imani, Reza; Nazhad, Mousa M.; Dutta, Joydeep

    2010-10-01

    Zinc oxide (ZnO) nanorods were grown on a paper support prepared from soft wood pulp. The photocatalytic activity of a sheet of paper with ZnO nanorods embedded in its porous matrix has been studied. ZnO nanorods were firmly attached to cellulose fibers and the photocatalytic paper samples were reused several times with nominal decrease in efficiency. Photodegradation of up to 93% was observed for methylene blue in the presence of paper filled with ZnO nanorods upon irradiation with visible light at 963 Wm-2 for 120 min. Under similar conditions, photodegradation of approximately 35% was observed for methyl orange. Antibacterial tests revealed that the photocatalytic paper inhibits the growth of Escherichia coli under room lighting conditions.

  7. Nanostructured gold microelectrodes for SERS and EIS measurements by incorporating ZnO nanorod growth with electroplating.

    PubMed

    Zong, Xianli; Zhu, Rong; Guo, Xiaoliang

    2015-01-01

    In this paper, a fine gold nanostructure synthesized on selective planar microelectrodes in micro-chip is realized by using an advanced hybrid fabrication approach incorporating growth of nanorods (NRs) with gold electroplating. By this developed nanostructure, integration of in-situ surface-enhanced Raman spectroscopy (SERS) detection with electrochemical impedance spectroscopy (EIS) measurement for label-free, nondestructive, real-time and rapid monitoring on a single cell has been achieved. Moreover, parameters of Au nanostructures such as size of nanoholes/nanogaps can be controllably adjusted in the fabrication. We have demonstrated a SERS enhancement factor of up to ~2.24 × 10(6) and double-layer impedance decrease ratio of 90% ~ 95% at low frequency range below 200 kHz by using nanostructured microelectrodes. SERS detection and in-situ EIS measurement of a trapped single cell by using planar microelectrodes are realized to demonstrate the compatibility, multi-functions, high-sensitivity and simplicity of the micro-chip system. This dual function platform integrating SERS and EIS is of great significance in biological, biochemical and biomedical applications. PMID:26558325

  8. Nanostructured gold microelectrodes for SERS and EIS measurements by incorporating ZnO nanorod growth with electroplating

    NASA Astrophysics Data System (ADS)

    Zong, Xianli; Zhu, Rong; Guo, Xiaoliang

    2015-11-01

    In this paper, a fine gold nanostructure synthesized on selective planar microelectrodes in micro-chip is realized by using an advanced hybrid fabrication approach incorporating growth of nanorods (NRs) with gold electroplating. By this developed nanostructure, integration of in-situ surface-enhanced Raman spectroscopy (SERS) detection with electrochemical impedance spectroscopy (EIS) measurement for label-free, nondestructive, real-time and rapid monitoring on a single cell has been achieved. Moreover, parameters of Au nanostructures such as size of nanoholes/nanogaps can be controllably adjusted in the fabrication. We have demonstrated a SERS enhancement factor of up to ~2.24 × 106 and double-layer impedance decrease ratio of 90% ~ 95% at low frequency range below 200 kHz by using nanostructured microelectrodes. SERS detection and in-situ EIS measurement of a trapped single cell by using planar microelectrodes are realized to demonstrate the compatibility, multi-functions, high-sensitivity and simplicity of the micro-chip system. This dual function platform integrating SERS and EIS is of great significance in biological, biochemical and biomedical applications.

  9. Nanostructured gold microelectrodes for SERS and EIS measurements by incorporating ZnO nanorod growth with electroplating

    PubMed Central

    Zong, Xianli; Zhu, Rong; Guo, Xiaoliang

    2015-01-01

    In this paper, a fine gold nanostructure synthesized on selective planar microelectrodes in micro-chip is realized by using an advanced hybrid fabrication approach incorporating growth of nanorods (NRs) with gold electroplating. By this developed nanostructure, integration of in-situ surface-enhanced Raman spectroscopy (SERS) detection with electrochemical impedance spectroscopy (EIS) measurement for label-free, nondestructive, real-time and rapid monitoring on a single cell has been achieved. Moreover, parameters of Au nanostructures such as size of nanoholes/nanogaps can be controllably adjusted in the fabrication. We have demonstrated a SERS enhancement factor of up to ~2.24 × 106 and double-layer impedance decrease ratio of 90% ~ 95% at low frequency range below 200 kHz by using nanostructured microelectrodes. SERS detection and in-situ EIS measurement of a trapped single cell by using planar microelectrodes are realized to demonstrate the compatibility, multi-functions, high-sensitivity and simplicity of the micro-chip system. This dual function platform integrating SERS and EIS is of great significance in biological, biochemical and biomedical applications. PMID:26558325

  10. Self-organized ZnO nanorod with photooxidative cell membrane perforation enables large-scale cell manipulation.

    PubMed

    Saito, Takashi K; Seki, Munetoshi; Tabata, Hitoshi

    2008-08-01

    Various devices have been developed for verification and application of cellular functions in recent years. In our previous study, we found that local oxidation reactions in the cell membrane could produce submicron sizes of reversible membrane perforations in cells, while more than 80% of treated cells were viable even after perforations; therefore, to date, we have attempted some applications of this mechanism and analyzed their feasibility. In the present study, we developed a rod-shaped device in which the function of membrane perforation is added by utilizing a photosensitizer and, using the device, we have attempted to produce membrane perforations in a large number of cells. Zinc oxide nanorods were synthesized on the basis of the vapor-liquid-solid mechanism and alpha-terthienyl (photosensitizer) was adsorbed onto gold at the top of the rods to add a membrane perforation function. We studied the effect of the oxidation catalytic ability of the rods on rat PC12 cells after pressing and making the rods' growth side come into contact with the base plate pressed onto the cells in a culture plate followed by photoexcitation of the photosensitizer for a certain period of time. It was revealed that water-soluble fluorescent marker molecules added extracellularly were taken up by the cells when the rods were applied at a pressure of 70 g/cm(2), with a light intensity of 0.82 W/cm(2), and with light irradiation for 30 s, as found in the case of the conventional photochemical cell membrane perforation method targeted at a single cell. These results suggest that cell membrane perforation can be successfully achieved in a large number of cells at a time. PMID:18584155

  11. Enhanced power efficiency of ZnO based organic/inorganic solar cells by surface modification

    NASA Astrophysics Data System (ADS)

    Tang, Shuangshuang; Tang, Ning; Meng, Xiuqing; Huang, Shihua; Hao, Yafei

    2016-09-01

    We present series of strategies to enhance efficiency of ZnO nanorods based organic/inorganic solar cells with spin-coated P3HT:PCBM blend as active layer. The performance of the as-fabricated devices is improved by controlling the size of ZnO nanorods, annealing temperature and time of active layer, surface modification of ZnO with PSBTBT. Optimized device of ITO/ZnO nanorod/P3HT:PCBM/Ag device with PSBTBT surface modification and air exposure reaches an efficiency of 2.02% with a short-circuit current density, open-circuit voltage and fill factor of 13.23 mA cm-2, 0.547 V and 28%, respectively, under AM 1.5 irradiation of 100 mW m-2, the increase in efficiency is 7-fold of the PSBTBT surface modified ITO/ZnO nanorods/P3HT:PCBM/Ag device compared with the unmodified one, which is own to the increased interface contact, expanded light absorption, tailored band alignment attributed to PSBTBT. We found exposure to air and surface modification is crucial to improve the device performance, and we discussed the mechanisms that affect the performance of the devices in detail.

  12. Controlled hydrothermal growth of ZnO nanostructures by sequestering the Zn metal ions with the chelating agent EDTA

    NASA Astrophysics Data System (ADS)

    Ram, S. D. Gopal; Ravi, G.; Manikandan, MR.; Mahalingam, T.; Anbu Kulandainathan, M.

    2011-10-01

    In the present work, a controlled growth of ZnO nanostructures by manipulating Zn metal ion concentration by the chelating action of ethylene diaminetetra acetic acid in hydrothermal method is studied. EDTA produces metal-chelate complex by the formation of bidentate ligand with Zn 2+ in the solution and diminishes the reactivity of Zn metal cations. Concentration of EDTA in the mother solution was varied in different ranges like 3, 5 and 10 mM while retaining the zinc metal salt and the NaOH concentration the same. Three different morphologies of wurtzite structured ZnO nanostructures such as nanorods-bunch, separate/discrete uniformly sized hexagonal nanorods and tapered flower petals like shapes are achieved by 3, 5 and 10 mM strengths of EDTA, respectively. The medium concentration 5 mM of EDTA is found to have moderate control over producing ZnO nanostructures of uniform diameter and a high aspect (length to diameter) ratio. An array of vertically aligned free standing ZnO nanorods with uniform spacing is successfully achieved by the addition of 5 mM of EDTA in the mother solution and the same is studied for its fluorescence property at an excitation of 325 nm and it has exhibited a characteristic UV emission of ZnO around 383 nm.

  13. Continuous wet-process growth of ZnO nanoarrays for wire-shaped photoanode of dye-sensitized solar cell.

    PubMed

    Tao, Pan; Guo, Wanwan; Du, Jun; Tao, Changyuan; Qing, Shenglan; Fan, Xing

    2016-09-15

    Well-aligned ZnO nanorod arrays have been grown on metal-plated polymer fiber via a mild wet process in a newly-designed continuous reactor, aiming to provide wire-shaped photoanodes for wearable dye-sensitized solar cells. The growth conditions were systematically optimized with the help of computational flow-field simulation. The flow field in the reactor will not only affect the morphology of the ZnO nanorod⧹nanowire but also affect the pattern distribution of nanoarray on the electrode surface. Unlike the sectional structure from the traditional batch-type reactor, ZnO nanorods with finely-controlled length and uniform morphology could be grown from the continuous reactor. After optimization, the wire-shaped ZnO-type photoanode grown from the continuous reactor exhibited better photovoltaic performance than that from the traditional batch-type reactor. PMID:27289432

  14. Polystyrene-microsphere-assisted patterning of ZnO nanostructures: growth and characterization.

    PubMed

    Dong, J J; Zhang, X W; Zhang, S G; Tan, H R; Yin, Z G; Gao, Y; Wang, J X

    2013-02-01

    In this work, periodic arrays of various ZnO nanostructures were fabricated on both Si and GaN substrates via a facile hydrothermal process. To realize the site-specific growth, two kinds of masks were introduced. The polystyrene (PS) microsphere self-assembled monolayer (SAM) was employed as the mask to create a patterned seed layer to guide the growth of ZnO nanostructures. However, the resulting ZnO nanostructures are non-equidistant, and the diameter of the ZnO nanostructures is uncontrollable. As an alternative, TiO2 sol was used to replicate the PS microsphere SAM, and the inverted SAM (ISAM) mask was obtained by extracting the PS microspheres with toluene. By using the ISAM mask, the hexagonal periodic array of ZnO nanostructures with high uniformity were readily produced. Furthermore, the effect of the underlying substrates on the morphology of ZnO nanostructures has been investigated. It is found that the highly ordered and vertically aligned ZnO nanorods epitaxially grow on the GaN substrate, while the ZnO nanoflowers on Si substrates are random oriented. PMID:23646580

  15. Zinc oxide nanorod assisted rapid single-step process for the conversion of electrospun poly(acrylonitrile) nanofibers to carbon nanofibers with a high graphitic content

    NASA Astrophysics Data System (ADS)

    Nain, Ratyakshi; Singh, Dhirendra; Jassal, Manjeet; Agrawal, Ashwini K.

    2016-02-01

    The effect of incorporation of rigid zinc oxide (ZnO) nanostructures on carbonization behavior of electrospun special acrylic fiber grade poly(acrylonitrile) (PAN-SAF) nanofibers was investigated. ZnO nanorods with high aspect ratios were incorporated into a PAN-N,N-dimethylformamide system and the composite nanofibers reinforced with aligned ZnO rods up to 50 wt% were successfully electrospun, and subsequently, carbonized. The morphology and the structural analysis of the resultant carbon nanofibers revealed that the rigid ZnO nanorods, present inside the nanofibers, possibly acted as scaffolds (temporary support structures) for immobilization of polymer chains and assisted in uniform heat distribution. This facilitated rapid and efficient conversion of the polymer structure to the ladder, and subsequently, the graphitized structure. At the end of the process, the ZnO nanorods were found to completely separate from the carbonized fibers yielding pure carbon nanofibers with a high graphitic content and surface area. The approach could be used to eliminate the slow, energy intensive stabilization step and achieve fast conversion of randomly laid carbon nanofiber webs in a single step to carbon nanofibers without the application of external tension or internal templates usually employed to achieve a high graphitic content in such systems.The effect of incorporation of rigid zinc oxide (ZnO) nanostructures on carbonization behavior of electrospun special acrylic fiber grade poly(acrylonitrile) (PAN-SAF) nanofibers was investigated. ZnO nanorods with high aspect ratios were incorporated into a PAN-N,N-dimethylformamide system and the composite nanofibers reinforced with aligned ZnO rods up to 50 wt% were successfully electrospun, and subsequently, carbonized. The morphology and the structural analysis of the resultant carbon nanofibers revealed that the rigid ZnO nanorods, present inside the nanofibers, possibly acted as scaffolds (temporary support structures) for

  16. Directed spatial organization of zinc oxide nanorods.

    SciTech Connect

    Simmons, Neil C.; Liu, Jun; Voigt, James A.; Hsu, Julia W. P.; Tian, Zhengrong Ryan; Matzke, Carolyn M.

    2004-09-01

    The ability to precisely place nanomaterials at predetermined locations is necessary for realizing applications using these new materials. Using an organic template, we demonstrate directed growth of zinc oxide (ZnO) nanorods on silver films from aqueous solution. Spatial organization of ZnO nanorods in prescribed arbitrary patterns was achieved, with unprecedented control in selectivity, crystal orientation, and nucleation density. Surprisingly, we found that caboxylate endgroups of {omega}-alkanethiol molecules strongly inhibit ZnO nucleation. The mechanism for this observed selectivity is discussed.

  17. FAST TRACK COMMUNICATION: (La,Sr)CoO3/ZnO nanofilm-nanorod diode arrays for photo-responsive moisture and humidity detection

    NASA Astrophysics Data System (ADS)

    Gao, Haiyong; Cai, Wenjie; Shimpi, Paresh; Lin, Hui-Jan; Gao, Pu-Xian

    2010-07-01

    Large scale (La,Sr)CoO3 (LSCO)/ZnO nanofilm-nanorod diode arrays have been successfully fabricated using a combination of hydrothermal synthesis and colloidal deposition. With well-controlled dimensionality, crystallinity, crystal structures and device structures, LSCO/ZnO nanofilm-nanorod diode arrays display an excellent rectifying current-voltage (I-V) characteristic under ±1 V bias with negligible leakage current upon reverse bias. These nanostructured diode arrays have been found to be sensitive to UV illumination and different relative humidities at room temperature upon forward bias. A negative photoconductivity response is revealed upon UV illumination on the diode arrays as a result of the desorption process of nanofilm-nanorod surface moisture. The forward current of LSCO/ZnO nanofilm-nanorod diodes increases significantly with increasing relative humidity. These unique nanostructured diode arrays could be useful as photo-responsive moisture and humidity detectors.

  18. Band alignment at the interface between Ni-doped Cr2O3 and Al-doped ZnO: implications for transparent p-n junctions

    NASA Astrophysics Data System (ADS)

    Arca, Elisabetta; McInerney, Michael A.; Shvets, Igor V.

    2016-06-01

    The realization of transparent electronic and optoelectronic devices requires the use of transparent p-n junctions. In this context, understanding the band alignment at the interface between the p- and n-components represents a fundamental step towards the realization of high performance devices. In this work, the band alignment at the interface between Al-doped ZnO (AZO) and Ni-doped Cr2O3 has been analysed. The formation and evolution of the core levels as the interface progressively forms have been followed by means of x-ray Photoelectron Spectroscopy, x-ray diffraction and x-ray reflectivity. A type two (staggered) band alignment was identified, with the valence band offset and conduction band offset found to be 2.6 eV and 2.5 eV, respectively. The electrical behaviour will be discussed in terms of the position of the bands, the presence of band bending and the expected built-in potential and how these can be engineered in order to achieve the maximum performance for this hetero-structure.

  19. Growth of Cu2O on Ga-doped ZnO and their interface energy alignment for thin film solar cells

    NASA Astrophysics Data System (ADS)

    Wong, L. M.; Chiam, S. Y.; Huang, J. Q.; Wang, S. J.; Pan, J. S.; Chim, W. K.

    2010-08-01

    Cu2O thin films are deposited by direct current reactive magnetron sputtering on borofloat glass and indium tin oxide (ITO) coated glass at room temperature. The effect of oxygen partial pressure on the structures and properties of Cu2O thin films are investigated. We show that oxygen partial pressure is a crucial parameter in achieving pure phases of CuO and Cu2O. Based on this finding, we fabricate heterojunctions of p-type Cu2O with n-type gallium doped ZnO (GZO) on ITO coated glass substrates by pulsed laser deposition for GZO thin films. The energy band alignment for thin films of Cu2O/GZO on ITO glass is characterized using high-resolution x-ray photoelectron spectroscopy. The energy band alignment for the Cu2O/GZO heterojunctions is determined to be type II with a valence band offset of 2.82 eV and shows negligible effects of variation with gallium doping. The higher conduction band of the Cu2O relative to that of GZO in the obtained band alignment shows that the heterojunctions are suitable for solar cell application based on energy levels consideration.

  20. Growth of Cu{sub 2}O on Ga-doped ZnO and their interface energy alignment for thin film solar cells

    SciTech Connect

    Wong, L. M.; Chiam, S. Y.; Wang, S. J.; Pan, J. S.; Huang, J. Q.; Chim, W. K.

    2010-08-15

    Cu{sub 2}O thin films are deposited by direct current reactive magnetron sputtering on borofloat glass and indium tin oxide (ITO) coated glass at room temperature. The effect of oxygen partial pressure on the structures and properties of Cu{sub 2}O thin films are investigated. We show that oxygen partial pressure is a crucial parameter in achieving pure phases of CuO and Cu{sub 2}O. Based on this finding, we fabricate heterojunctions of p-type Cu{sub 2}O with n-type gallium doped ZnO (GZO) on ITO coated glass substrates by pulsed laser deposition for GZO thin films. The energy band alignment for thin films of Cu{sub 2}O/GZO on ITO glass is characterized using high-resolution x-ray photoelectron spectroscopy. The energy band alignment for the Cu{sub 2}O/GZO heterojunctions is determined to be type II with a valence band offset of 2.82 eV and shows negligible effects of variation with gallium doping. The higher conduction band of the Cu{sub 2}O relative to that of GZO in the obtained band alignment shows that the heterojunctions are suitable for solar cell application based on energy levels consideration.

  1. Band alignment at the interface between Ni-doped Cr2O3 and Al-doped ZnO: implications for transparent p-n junctions.

    PubMed

    Arca, Elisabetta; McInerney, Michael A; Shvets, Igor V

    2016-06-01

    The realization of transparent electronic and optoelectronic devices requires the use of transparent p-n junctions. In this context, understanding the band alignment at the interface between the p- and n-components represents a fundamental step towards the realization of high performance devices. In this work, the band alignment at the interface between Al-doped ZnO (AZO) and Ni-doped Cr2O3 has been analysed. The formation and evolution of the core levels as the interface progressively forms have been followed by means of x-ray Photoelectron Spectroscopy, x-ray diffraction and x-ray reflectivity. A type two (staggered) band alignment was identified, with the valence band offset and conduction band offset found to be 2.6 eV and 2.5 eV, respectively. The electrical behaviour will be discussed in terms of the position of the bands, the presence of band bending and the expected built-in potential and how these can be engineered in order to achieve the maximum performance for this hetero-structure. PMID:26952763

  2. Enhanced vibration damping of carbon fibers-ZnO nanorods hybrid composites

    NASA Astrophysics Data System (ADS)

    Alipour Skandani, A.; Masghouni, N.; Case, S. W.; Leo, D. J.; Al-Haik, M.

    2012-08-01

    In this study, ZnO nanorods are grown on the surface of polyacrylonitrile based carbon fibers using a low temperature hydrothermal synthesis technique. Bi-layered carbon fiber-ZnO nanorod hybrid composite with epoxy matrix is prepared and tested for vibrational attenuations using dynamic mechanical analysis. Results revealed that the growth of ZnO nanorods on top of carbon fiber increases the damping performance by 50% while causing a slight decrease (˜7%) on the storage modulus. The enhanced damping of the hybrid composites can be related to the frictional mechanisms between the ZnO nanorod/epoxy and nanorod/nanorod interfaces combined with piezoelectric effect of ZnO.

  3. A novel electrochemiluminescent immunosensor based on CdS-coated ZnO nanorod arrays for HepG2 cell detection

    NASA Astrophysics Data System (ADS)

    Liu, Danqing; Wang, Lei; Ma, Shenghua; Jiang, Zhaohua; Yang, Bin; Han, Xiaojun; Liu, Shaoqin

    2015-02-01

    In this work, the highly oriented CdS-coated-ZnO nanorod arrays have been fabricated. The CdS-coated-ZnO nanorod arrays show high electrochemiluminescence intensity, fast response and good stability. All of the desirable properties spur the development of an ECL immunosensor for the detection of the liver cancer cell line (HepG2 cells). Two successive modification steps of 3-aminopropyltriethoxysilane and gold nanoparticles onto the CdS-coated-ZnO nanorod arrays not only offer the substrates for conjugation of antibody, but also effectively enhance the ECL signal, resulting in production of the high performance ECL immunosensor. The ECL immunosensor exhibits a sensitive response to HepG2 cells in a linear range of 300-10 000 cells mL-1 with a detection limit of 256 cells mL-1. The proposed sensor characteristics of high specificity, good reproducibility and remarkable stability will provide a sensitive, selective, and convenient approach for the clinical detection of cancer cells.In this work, the highly oriented CdS-coated-ZnO nanorod arrays have been fabricated. The CdS-coated-ZnO nanorod arrays show high electrochemiluminescence intensity, fast response and good stability. All of the desirable properties spur the development of an ECL immunosensor for the detection of the liver cancer cell line (HepG2 cells). Two successive modification steps of 3-aminopropyltriethoxysilane and gold nanoparticles onto the CdS-coated-ZnO nanorod arrays not only offer the substrates for conjugation of antibody, but also effectively enhance the ECL signal, resulting in production of the high performance ECL immunosensor. The ECL immunosensor exhibits a sensitive response to HepG2 cells in a linear range of 300-10 000 cells mL-1 with a detection limit of 256 cells mL-1. The proposed sensor characteristics of high specificity, good reproducibility and remarkable stability will provide a sensitive, selective, and convenient approach for the clinical detection of cancer cells

  4. Ultrasonic synthesis of fern-like ZnO nanoleaves and their enhanced photocatalytic activity

    NASA Astrophysics Data System (ADS)

    Ma, Qing Lan; Xiong, Rui; Zhai, Bao-gai; Huang, Yuan Ming

    2015-01-01

    Two-dimensional fern-like ZnO nanoleaves were synthesized by ultrasonicating zinc microcrystals in water. The morphology, crystal structure, optical property and photocatalytic activity of the fern-like ZnO nanoleaves were characterized with scanning electron microscopy, X-ray diffraction, transmission electron microscopy, photoluminescence spectroscopy and ultraviolet-visible spectroscopy, respectively. It is found that one fern-like ZnO nanoleaf is composed of one ZnO nanorod as the central trunk and a number of ZnO nanoplates as the side branches in opposite pairs along the central ZnO nanorod. The central ZnO nanorod in the fern-like nanoleaves is about 1 μm long while the side-branching ZnO nanoplates are about 100 nm long and 20 nm wide. Further analysis has revealed that ZnO nanocrystals are the building blocks of the central ZnO nanorod and the side-branching ZnO nanoplates. Under identical conditions, fern-like ZnO nanoleaves exhibit higher photocatalytic activity in photodegrading methyl orange in aqueous solution than spherical ZnO nanocrystals. The first-order photocatalytic rate constant of the fern-like ZnO nanoleaves is about four times as large as that of the ZnO nanoparticles. The branched architecture of the hierarchical nanoleaves is suggested be responsible for the enhanced photocatalytic activity of the fern-like ZnO nanoleaves.

  5. Effect of laser annealing using high repetition rate pulsed laser on optical properties of phosphorus-ion-implanted ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Shimogaki, Tetsuya; Ofuji, Taihei; Tetsuyama, Norihiro; Okazaki, Kota; Higashihata, Mitsuhiro; Nakamura, Daisuke; Ikenoue, Hiroshi; Asano, Tanemasa; Okada, Tatsuo

    2014-02-01

    The effect of high repetition rate pulsed laser annealing with a KrF excimer laser on the optical properties of phosphorus-ion-implanted zinc oxide nanorods has been investigated. The recovery levels of phosphorus-ion-implanted zinc oxide nanorods have been measured by photoluminescence spectra and cathode luminescence images. Cathode luminescence disappeared over 300 nm below the surface due to the damage caused by ion implantation with an acceleration voltage of 25 kV. When the annealing was performed at a low repetition rate of the KrF excimer laser, cathode luminescence was recovered only in a shallow area below the surface. The depth of the annealed area was increased along with the repetition rate of the annealing laser. By optimizing the annealing conditions such as the repetition rate, the irradiation fluence and so on, we have succeeded in annealing the whole damaged area of over 300 nm in depth and in observing cathode luminescence. Thus, the effectiveness of high repetition rate pulsed laser annealing on phosphorus-ion-implanted zinc oxide nanorods was demonstrated.

  6. Two-stage epitaxial growth of vertically-aligned SnO2 nano-rods on(001) ceria

    SciTech Connect

    Solovyov, Vyacheslav F.; Wu, Li-jun; Rupich, Martin W.; Sathyamurthy, Srivatsan; Li, Xiaoping; Li, Qiang

    2014-09-20

    Growth of high-aspect ratio oriented tin oxide, SnO2, nano-rods is complicated by a limited choice of matching substrates. We show that a (001) cerium oxide, CeO2, surface uniquely enables epitaxial growth of tin-oxide nano-rods via a two-stage process. First, (100) oriented nano-wires coat the ceria surface by lateral growth, forming a uniaxially-textured SnO2 deposit. Second, vertical SnO2nano-rods nucleate on the deposit by homoepitaxy. We demonstrate growth of vertically oriented 1-2 μm long nano-rods with an average diameter of ≈20 nm.

  7. Use of distributed Bragg reflectors to enhance Fabry-Pérot lasing in vertically aligned ZnO nanowires

    NASA Astrophysics Data System (ADS)

    Kong, Jieying; Chu, Sheng; Huang, Jian; Olmedo, Mario; Zhou, Weihang; Zhang, Long; Chen, Zhanghai; Liu, Jianlin

    2013-01-01

    An optically pumped ZnO nanowire laser with a 10-period SiO2/SiN x distributed Bragg reflector (DBR) was demonstrated. Stimulated emissions with equally distributed Fabry-Pérot lasing modes were observed at pumping powers larger than 121 kW/cm2. This result, when compared to nanowires of the same length and without a DBR structure, shows that a lower threshold of pumping power, higher quality factor, and larger cavity finesse can be achieved due to the high reflectivity of the DBR in the designed wavelength range. A coexistence of stimulated and spontaneous emissions was also observed above threshold and was attributed to partially confined waveguide modes in nanowires with diameters smaller than 100 nm.

  8. Synthesis of defect-rich, (001) faceted-ZnO nanorod on a FTO substrate as efficient photocatalysts for dehydrogenation of isopropanol to acetone

    NASA Astrophysics Data System (ADS)

    Tan, Sin Tee; Umar, Akrajas Ali; Salleh, Muhamad Mat

    2016-06-01

    Highly oriented ZnO nanorod was successfully synthesised on Ag nanoseed coated FTO substrate via a microwave hydrolysis approach. It was found that the morphology and the optical properties of the ZnO nanorod are strongly influenced by the power of the microwave irradiation used during the growth process. The aspect ratio of the nanorods changed from high to low with the increasing of microwave power. It was also found that the optical band gap of the ZnO nanorod red shifted with the increasing of the microwave power, reflecting an excellent tune ability of the optical properties of ZnO nanorods. The photocatalytic activity of these unique nanorod was evaluated by a dehydrogenation process of isopropanol to acetone in the presence of ZnO nanorod. It was found that the ZnO nanorod exhibited an excellent catalytic performance by showing an ability to accelerate the production of 0.031 mol L-1 of acetone within only 35 min or 0.9 mmol L-1 min-1 from isopropyl alcohol dehydrogenation. It was almost no conversion from isopropyl alcohol when ZnO nanorods was absence during the reaction. In this report, a detailed mechanism of ZnO nanorod formation and the relationship between morphology and optical energy band gap are described.

  9. Challenges in the simulation of dye-sensitized ZnO solar cells: quantum confinement, alignment of energy levels and excited state nature at the dye/semiconductor interface.

    PubMed

    Amat, Anna; De Angelis, Filippo

    2012-08-14

    We report a first principles density functional theory/time-dependent density functional theory (DFT/TDDFT) computational investigation on a prototypical perylene dye anchored to realistic ZnO nanostructures, approaching the size of the ZnO nanowires used in dye-sensitized solar cells devices. DFT calculations were performed on (ZnO)(n) clusters of increasing size, with n up to 222, of 1.3 × 1.5 × 3.4 nm dimensions, and for the related dye-sensitized models. We show that quantum confinement in the ZnO nanostructures substantially affects the dye/semiconductor alignment of energy levels, with smaller ZnO models providing unfavourable electron injection. An increasing broadening of the dye LUMO is found moving to larger substrates, substantially contributing to the interfacial electronic coupling. TDDFT excited state calculations for the investigated dye@(ZnO)(222) system are fully consistent with experimental data, quantitatively reproducing the red-shift and broadening of the visible absorption spectrum observed for the ZnO-anchored dye compared to the dye in solution. TDDFT calculations on the fully interacting system also introduce a contribution to the dye/semiconductor admixture, due to configurational excited state mixing. Our results highlight the importance of quantum confinement in dye-sensitized ZnO interfaces, and provide the fundamental insight lying at the heart of the associated DSC devices. PMID:22743544

  10. Well-aligned Nd-doped SnO2 nanorod layered arrays: preparation, characterization and enhanced alcohol-gas sensing performance.

    PubMed

    Qin, Guohui; Gao, Fan; Jiang, Qiuping; Li, Yuehua; Liu, Yongjun; Luo, Li; Zhao, Kang; Zhao, Heyun

    2016-02-21

    Well-oriented neodymium doped SnO2 layered nanorod arrays were synthesized by a substrate-free hydrothermal route using sodium stannate and sodium hydroxide at 210 °C. The morphology and phase structure of the Nd-doped SnO2 nanoarrays were investigated by X-ray powder diffraction spectroscopy, scanning electron microscopy, transmission electron microscopy, Raman scattering spectroscopy, X-ray photoelectron spectroscopy and the BET method. The results demonstrated that the Nd-doped SnO2 layered nanorod arrays showed a unique nanostructure combined together with double layered arrays of nanorods with a diameter of 12 nm and a length of several hundred nanometers. The Nd-doped layered SnO2 nanoarrays kept the crystal structure of the bulk SnO2 and possessed more surface defects caused by the Nd ions doped into the SnO2 lattice. The Nd dopant acts as a crystallite growth inhibitor to prevent the growth of SnO2 nanorods. An investigation into the gas-sensing properties indicated that the optimized doping level of 3.0 at% Nd-doped SnO2 layered nanorod arrays exhibited an excellent sensing response toward alcohol at a lower temperature of 260 °C. The enhanced sensor performance was attributed to the higher specific surface area, multi-defect surface structure and the excellent catalytic properties of Nd dopant that is able to increase the amount of active sites on the surface of semiconducting oxides. The Nd-doped SnO2 nanoarray sensors were considered to be a promising candidate for trace alcohol detections in environmental gas monitoring. PMID:26863493

  11. Preparation of thin hexagonal highly-ordered anodic aluminum oxide (AAO) template onto silicon substrate and growth ZnO nanorod arrays by electrodeposition

    NASA Astrophysics Data System (ADS)

    Chahrour, Khaled M.; Ahmed, Naser M.; Hashim, M. R.; Elfadill, Nezar G.; Qaeed, M. A.; Bououdina, M.

    2014-12-01

    In this study, anodic aluminum oxide (AAO) templates of Aluminum thin films onto Ti-coated silicon substrates were prepared for growth of nanostructure materials. Hexagonally highly ordered thin AAO templates were fabricated under controllable conditions by using a two-step anodization. The obtained thin AAO templates were approximately 70 nm in pore diameter and 250 nm in length with 110 nm interpore distances within an area of 3 cm2. The difference between first and second anodization was investigated in details by in situ monitoring of current-time curve. A bottom barrier layer of the AAO templates was removed during dropping the voltage in the last period of the anodization process followed by a wet etching using phosphoric acid (5 wt%) for several minutes at ambient temperature. As an application, Zn nanorod arrays embedded in anodic alumina (AAO) template were fabricated by electrodeposition. Oxygen was used to oxidize the electrodeposited Zn nanorods in the AAO template at 700 °C. The morphology, structure and photoluminescence properties of ZnO/AAO assembly were analyzed using Field-emission scanning electron microscope (FESEM), Energy dispersive X-ray spectroscopy (EDX), Atomic force microscope (AFM), X-ray diffraction (XRD) and photoluminescence (PL).

  12. Electric Field Assisted Assembly of Perpendicular Oriented NanorodSuperlattices

    SciTech Connect

    Ryan, Kevin M.; Mastroianni, Alex; Stancil, Kimani A.; Liu,Haitao; Alivisatos, Paul A.

    2006-04-10

    We observe the assembly of CdS nanorod superlattices by thecombination of a DC electric field and solvent evaporation. In eachelectric field (1 V/um) assisted assembly, CdS nanorods (5 x 30 nm)suspended initially in toluene were observed to align perpendicularly tothe substrate. Azimuthal alignment along the nanorod crystal faces andthe presence of stacking faults indicate that both 2D and 3D assemblieswere formed by a process of controlled super crystal growth.

  13. Laser stimulated electrooptics in the Ag-ZnO nanorods

    NASA Astrophysics Data System (ADS)

    Tan, Sin Tee; AlZayed, N. S.; Lakshminarayana, G.; Naumar, F.; Umar, A. A.; Oyama, M.; Myronchuk, G.; Kityk, I. V.

    2014-07-01

    In the present work, we have discovered a photoinduced linear electrooptics in ZnO nanorods which were fabricated by simply varying the content of the growth solution. It was established that by varying the growth solution concentration one can vary the surface density of the ZnO nanorod arrays growth on the surface. The lowest ZnO content produces the lowest surface density in the nanorods. The photoinduced linear electrooptics was studied using the He-Ne laser at wavelength 1150 nm and was stimulated by 7 ns nitrogen laser at 371 nm. The nonlinear dependence of the Ag nanoparticle (NP) concentration was found and it was significantly higher than that for the pure ZnO NP. Principal role of the Ag NP on the observed effects was discussed.

  14. Importance of Plasmonic Heating on Visible Light Driven Photocatalysis of Gold Nanoparticle Decorated Zinc Oxide Nanorods

    NASA Astrophysics Data System (ADS)

    Bora, Tanujjal; Zoepfl, David; Dutta, Joydeep

    2016-05-01

    Herein we explore the role of localized plasmonic heat generated by resonantly excited gold (Au) NPs on visible light driven photocatalysis process. Au NPs are deposited on the surface of vertically aligned zinc oxide nanorods (ZnO NRs). The localized heat generated by Au NPs under 532 nm continuous laser excitation (SPR excitation) was experimentally probed using Raman spectroscopy by following the phonon modes of ZnO. Under the resonant excitation the temperature at the surface of the Au-ZnO NRs reaches up to about 300 °C, resulting in almost 6 times higher apparent quantum yield (AQY) for photocatalytic degradation of methylene blue (MB) compared to the bare ZnO NRs. Under solar light irradiation the Au-ZnO NRs demonstrated visible light photocatalytic activity twice that of what was achieved with bare ZnO NRs, while significantly reduced the activation energy required for the photocatalytic reactions allowing the reactions to occur at a faster rate.

  15. Importance of Plasmonic Heating on Visible Light Driven Photocatalysis of Gold Nanoparticle Decorated Zinc Oxide Nanorods.

    PubMed

    Bora, Tanujjal; Zoepfl, David; Dutta, Joydeep

    2016-01-01

    Herein we explore the role of localized plasmonic heat generated by resonantly excited gold (Au) NPs on visible light driven photocatalysis process. Au NPs are deposited on the surface of vertically aligned zinc oxide nanorods (ZnO NRs). The localized heat generated by Au NPs under 532 nm continuous laser excitation (SPR excitation) was experimentally probed using Raman spectroscopy by following the phonon modes of ZnO. Under the resonant excitation the temperature at the surface of the Au-ZnO NRs reaches up to about 300 °C, resulting in almost 6 times higher apparent quantum yield (AQY) for photocatalytic degradation of methylene blue (MB) compared to the bare ZnO NRs. Under solar light irradiation the Au-ZnO NRs demonstrated visible light photocatalytic activity twice that of what was achieved with bare ZnO NRs, while significantly reduced the activation energy required for the photocatalytic reactions allowing the reactions to occur at a faster rate. PMID:27242172

  16. Importance of Plasmonic Heating on Visible Light Driven Photocatalysis of Gold Nanoparticle Decorated Zinc Oxide Nanorods

    PubMed Central

    Bora, Tanujjal; Zoepfl, David; Dutta, Joydeep

    2016-01-01

    Herein we explore the role of localized plasmonic heat generated by resonantly excited gold (Au) NPs on visible light driven photocatalysis process. Au NPs are deposited on the surface of vertically aligned zinc oxide nanorods (ZnO NRs). The localized heat generated by Au NPs under 532 nm continuous laser excitation (SPR excitation) was experimentally probed using Raman spectroscopy by following the phonon modes of ZnO. Under the resonant excitation the temperature at the surface of the Au-ZnO NRs reaches up to about 300 °C, resulting in almost 6 times higher apparent quantum yield (AQY) for photocatalytic degradation of methylene blue (MB) compared to the bare ZnO NRs. Under solar light irradiation the Au-ZnO NRs demonstrated visible light photocatalytic activity twice that of what was achieved with bare ZnO NRs, while significantly reduced the activation energy required for the photocatalytic reactions allowing the reactions to occur at a faster rate. PMID:27242172

  17. Aligned ZnO/CdTe core-shell nanocable arrays on indium tin oxide: synthesis and photoelectrochemical properties.

    PubMed

    Wang, Xina; Zhu, Haojun; Xu, Yeming; Wang, Hao; Tao, Yin; Hark, Suikong; Xiao, Xudong; Li, Quan

    2010-06-22

    Vertically aligned ZnO/CdTe core-shell nanocable arrays-on-indium tin oxide (ITO) are fabricated by electrochemical deposition of CdTe on ZnO nanorod arrays in an electrolyte close to neutral pH. By adjusting the total charge quantity applied during deposition, the CdTe shell thickness can be tuned from several tens to hundreds of nanometers. The CdTe shell, which has a zinc-blende structure, is very dense and uniform both radially and along the axial direction of the nanocables, and forms an intact interface with the wurtzite ZnO nanorod core. The absorption of the CdTe shell above its band gap ( approximately 1.5 eV) and the type II band alignment between the CdTe shell and the ZnO core, respectively, demonstrated by absorption and photoluminescence measurements, make a nanocable array-on-ITO architecture a promising photoelectrode with excellent photovoltaic properties for solar energy applications. A photocurrent density of approximately 5.9 mA/cm(2) has been obtained under visible light illumination of 100 mW cm(-2) with zero bias potential (vs saturated calomel electrode). The neutral electrodeposition method can be generally used for plating CdTe on nanostructures made of different materials, which would be of interest in various applications. PMID:20446665

  18. Influence of water content in mixed solvent on surface morphology, wettability, and photoconductivity of ZnO thin films

    PubMed Central

    2014-01-01

    ZnO thin films have been synthesized by means of a simple hydrothermal method with different solvents. The effect of deionized water content in the mixed solvents on the surface morphology, crystal structure, and optical property has been investigated by scanning electron microscopy, X-ray diffraction, and UV-Vis spectrophotometer. A large number of compact and well-aligned hexagonal ZnO nanorods and the maximal texture coefficient have been observed in the thin film, which is grown in the mixed solvent with x = 40%. A lot of sparse, diagonal, and pointed nanorods can be seen in the ZnO thin film, which is grown in the 40-mL DI water solution. The optical band gap decreases firstly and then increases with the increase of x. Reversible wettability of ZnO thin films were studied by home-made water contact angle apparatus. Reversible transition between hydrophobicity and hydrophilicity may be attributed to the change of surface chemical composition, surface roughness and the proportion of nonpolar planes on the surface of ZnO thin films. Photocurrent response of ZnO thin films grown at different solvents were measured in air. The response duration of the thin film, which is grown in the solvent with x = 40%, exhibits a fast growth in the beginning but cannot approach the saturate current value within 100 s. The theoretical mechanism for the slower growth or decay duration of the photocurrent has been discussed in detail. PMID:25249823

  19. Effect of SiO2 Spacer-Layer Thickness on Localized Surface Plasmon-Enhanced ZnO Nanorod Array LEDs.

    PubMed

    Liu, Weizhen; Xu, Haiyang; Yan, Siyi; Zhang, Cen; Wang, Lingling; Wang, Chunliang; Yang, Liu; Wang, Xinhua; Zhang, Lixia; Wang, Jiannong; Liu, Yichun

    2016-01-27

    Localized surface plasmon (LSP)-enhanced ultraviolet LEDs have been constructed via spin-coating Ag nanoparticles onto ZnO/SiO2 core/shell nanorod array/p-GaN heterostructures. Different from the previous reports where the dielectric spacer-layer thickness was determined only through photoluminescence (PL) characterization, the SiO2 shell thickness in this work is also optimized by actual electroluminescence (EL) measurements to maximize the enhancement. It is interesting to find that the enhancement ratios derived from PL and EL measurements demonstrate different thickness dependences on SiO2 shell: an optimal 3.5-fold PL enhancement was obtained at the SiO2 thickness of 16 nm, while an "abnormal" 7-fold EL enhancement was achieved at the thickness of 12 nm. Time-resolved spectroscopy studies, as well as theoretical estimations and numerical simulations, reveal that the higher-ratio EL enhancement stems from joint contributions, both internal-quantum-efficiency improvement induced by exciton-LSP coupling and light-extraction-efficiency improvement aroused by photon-LSP coupling. PMID:26741886

  20. Effect of seed layer on the self assembly of spray pyrolyzed Al-doped ZnO nanoparticles

    NASA Astrophysics Data System (ADS)

    Dwivedi, Charu; Dutta, V.

    2013-03-01

    Al-doped ZnO (AlZO) nanorod arrays and nanostructures were fabricated on seed coated glass substrates via CoSP (Continuous Spray Pyrolysis) reactor. The as-synthesized aluminium doped ZnO nanoparticles and nanorods were analyzed through different characterization techniques. There were no significant changes found in the structure with doping of Al but the morphology of the film changed to branched nanorods and nanosheets with the change in seed solution and annealing temperature, respectively. Also, the current-voltage curves of the ZnO and AZO nanorod arrays was measured and it was found that the current response of AZO nanorods was higher than that of ZnO nanorods, proving the Al incorporation as a dopant.