Science.gov

Sample records for alkaline sodium phosphate

  1. Preparation of alkaline earth phosphates with sol containing sodium alginate and sodium diphosphate.

    PubMed

    Sugiyama, Shigeru; Fujii, Minako; Fukuta, Kazuya; Seyama, Kazunori; Sotowa, Ken-Ichiro; Shigemoto, Naoya

    2006-03-01

    Magnesium hydrogen phosphate, calcium hydroxyapatite, and strontium hydroxyapatite were successfully prepared from sol consisting of sodium alginate and Na4P2O7 with Mg2+, Ca2+, and Sr2+ in the corresponding nitrates, respectively. It is revealed that the order of the addition of those substrates and the role of sodium alginate are important factors for the preparation of desired phosphate compounds. According to the previous paper on the preparation of calcium hydroxyapatite, sodium alginate was mixed with aqueous Na4P2O7, followed by the addition of the aqueous divalent cations, resulting in the poor formation of the target phosphates. However, as a revised sol-gel technique, sodium alginate was added to the mixture of Na4P2O7 and aqueous Mg2+ and Sr2+, resulting in a rather favorable formation of MgHPO4 and strontium hydroxyapatite, respectively, while the sol thus obtained was stable within a few days. However for aqueous Ca2+, calcium hydroxyapatite could not be obtained through the revised sol-gel technique. In the preparation of magnesium hydrogen phosphate, sodium alginate contributes mainly to the sol formation of the precursor. The ion exchange between Na+ in sodium alginate and aqueous Ca2+ was important for the preparation of calcium hydroxyapatite. In contrast, the reaction of sodium alginate with the mixture of Na4P2O7 and aqueous Sr2+ afforded strontium hydroxyapatite at the specific ratio of those three substrates. The structure of calcium and strontium phosphates prepared from the revised sol-gel process evidently depended on the amount of sodium alginate introduced into the mixture of Na4P2O7 and the corresponding divalent cations. PMID:16154579

  2. Phase Stability of Chromium(III) Oxide Hydroxide in Alkaline Sodium Phosphate Solutions

    SciTech Connect

    S.E. Ziemniak; E.P. Opalka

    2003-07-08

    Grimaldiite ({alpha}-CrOOH) is shown to transform to a sodium-chromium(III)-hydroxyphosphate compound (SCHP) in alkaline sodium phosphate solutions at elevated temperatures via CrOOH(s) + 4Na{sup +} + 2HPO{sub 4}{sup 2-} = Na{sub 4}Cr(OH)(PO{sub 4}){sub 2}(s) + H{sub 2}O. X-ray diffraction analyses indicate that SCHP possesses an orthorhombic lattice having the same space group symmetry (Ibam, No.72) as sodium ferric hydroxyphosphate. A structurally-consistent designation for SCHP is Na{sub 3}Cr(PO{sub 4}){sub 2} {center_dot} NaOH; the molar volume of SCHP is estimated to be 1552 cm{sup 3}. The thermodynamic equilibrium for the above reaction was defined in the system Na{sub 2}O-P{sub 2}O{sub 5}-Cr{sub 2}O{sub 3}-H{sub 2}O for Na/P molar ratios between 2.0 and 2.4. On the basis of observed reaction threshold values for sodium phosphate concentration and temperature, the standard molar entropy (S{sup o}), heat capacity (C{sub p}{sup o}) and free energy of formation ({Delta}G{sub f}{sup o}) for SCHP were calculated to be 690 J/(mol-K), 622 J/(mol-K) and -3509.97 kJ/mol, respectively.

  3. 21 CFR 182.8778 - Sodium phosphate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Sodium phosphate. 182.8778 Section 182.8778 Food... HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic). (b) Conditions of use. This...

  4. 21 CFR 582.5778 - Sodium phosphate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Sodium phosphate. 582.5778 Section 582.5778 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic)....

  5. 21 CFR 582.1778 - Sodium phosphate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Sodium phosphate. 582.1778 Section 582.1778 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic)....

  6. 21 CFR 582.6778 - Sodium phosphate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Sodium phosphate. 582.6778 Section 582.6778 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic). (b) Conditions of use....

  7. 21 CFR 182.6778 - Sodium phosphate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Sodium phosphate. 182.6778 Section 182.6778 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Sequestrants 1 § 182.6778 Sodium phosphate. (a) Product. Sodium phosphate...

  8. 21 CFR 582.5778 - Sodium phosphate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Sodium phosphate. 582.5778 Section 582.5778 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic)....

  9. 21 CFR 182.1778 - Sodium phosphate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Sodium phosphate. 182.1778 Section 182.1778 Food... GENERALLY RECOGNIZED AS SAFE Multiple Purpose GRAS Food Substances § 182.1778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic). (b) Conditions of use. This substance is...

  10. 21 CFR 182.1778 - Sodium phosphate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Sodium phosphate. 182.1778 Section 182.1778 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR... Substances § 182.1778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic)....

  11. 21 CFR 582.6778 - Sodium phosphate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Sodium phosphate. 582.6778 Section 582.6778 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic). (b) Conditions of use....

  12. 21 CFR 182.1778 - Sodium phosphate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Sodium phosphate. 182.1778 Section 182.1778 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR... Substances § 182.1778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic)....

  13. 21 CFR 182.8778 - Sodium phosphate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Sodium phosphate. 182.8778 Section 182.8778 Food... HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic). (b) Conditions of use. This...

  14. 21 CFR 582.5778 - Sodium phosphate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Sodium phosphate. 582.5778 Section 582.5778 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic)....

  15. 21 CFR 182.8778 - Sodium phosphate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Sodium phosphate. 182.8778 Section 182.8778 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8778 Sodium phosphate. (a) Product. Sodium phosphate (mono-,...

  16. 21 CFR 582.1778 - Sodium phosphate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Sodium phosphate. 582.1778 Section 582.1778 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic)....

  17. 21 CFR 182.6778 - Sodium phosphate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Sodium phosphate. 182.6778 Section 182.6778 Food... HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Sequestrants 1 § 182.6778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic). (b) Conditions of use. This...

  18. 21 CFR 582.6778 - Sodium phosphate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Sodium phosphate. 582.6778 Section 582.6778 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic). (b) Conditions of use....

  19. 21 CFR 182.6778 - Sodium phosphate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Sodium phosphate. 182.6778 Section 182.6778 Food... HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Sequestrants 1 § 182.6778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic). (b) Conditions of use. This...

  20. 21 CFR 182.1778 - Sodium phosphate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Sodium phosphate. 182.1778 Section 182.1778 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR... Substances § 182.1778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic)....

  1. 21 CFR 582.6778 - Sodium phosphate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Sodium phosphate. 582.6778 Section 582.6778 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic). (b) Conditions of use....

  2. 21 CFR 182.8778 - Sodium phosphate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Sodium phosphate. 182.8778 Section 182.8778 Food... HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic). (b) Conditions of use. This...

  3. 21 CFR 182.8778 - Sodium phosphate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Sodium phosphate. 182.8778 Section 182.8778 Food... HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Nutrients § 182.8778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic). (b) Conditions of use. This...

  4. 21 CFR 582.6778 - Sodium phosphate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Sodium phosphate. 582.6778 Section 582.6778 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic). (b) Conditions of use....

  5. 21 CFR 182.1778 - Sodium phosphate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Sodium phosphate. 182.1778 Section 182.1778 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR... Substances § 182.1778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic)....

  6. 21 CFR 582.1778 - Sodium phosphate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Sodium phosphate. 582.1778 Section 582.1778 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic)....

  7. 21 CFR 182.6778 - Sodium phosphate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Sodium phosphate. 182.6778 Section 182.6778 Food... HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Sequestrants 1 § 182.6778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic). (b) Conditions of use. This...

  8. 21 CFR 182.6778 - Sodium phosphate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Sodium phosphate. 182.6778 Section 182.6778 Food... HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Sequestrants 1 § 182.6778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic). (b) Conditions of use. This...

  9. 21 CFR 582.1778 - Sodium phosphate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Sodium phosphate. 582.1778 Section 582.1778 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic)....

  10. 21 CFR 582.5778 - Sodium phosphate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Sodium phosphate. 582.5778 Section 582.5778 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic)....

  11. 21 CFR 582.1778 - Sodium phosphate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Sodium phosphate. 582.1778 Section 582.1778 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic)....

  12. 21 CFR 582.5778 - Sodium phosphate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Sodium phosphate. 582.5778 Section 582.5778 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5778 Sodium phosphate. (a) Product. Sodium phosphate (mono-, di-, and tribasic)....

  13. ESTIMATION OF PHOSPHATE ESTER HYDROLYSIS RATE CONSTANTS. I. ALKALINE HYDROLYSIS

    EPA Science Inventory

    SPARC (SPARC Performs Automated Reasoning in Chemistry) chemical reactivity models were extended to allow the calculation of alkaline hydrolysis rate constants of phosphate esters in water. The rate is calculated from the energy difference between the initial and transition state...

  14. ESTIMATION OF PHOSPHATE ESTER HYDROLYSIS RATE CONSTANTS - ALKALINE HYDROLYSIS

    EPA Science Inventory

    SPARC (SPARC Performs Automated Reasoning in Chemistry) chemical reactivity models were extended to allow the calculation of alkaline hydrolysis rate constants of phosphate esters in water. The rate is calculated from the energy difference between the initial and transition state...

  15. 21 CFR 522.1883 - Prednisolone sodium phosphate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Prednisolone sodium phosphate. 522.1883 Section... § 522.1883 Prednisolone sodium phosphate. (a) Specifications. Each milliliter of solution contains 20 milligrams (mg) prednisolone sodium phosphate (equivalent to 14.88 mg of prednisolone). (b) Sponsor. See...

  16. 21 CFR 182.1781 - Sodium aluminum phosphate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Sodium aluminum phosphate. 182.1781 Section 182.1781 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Food Substances § 182.1781 Sodium aluminum phosphate. (a) Product. Sodium aluminum phosphate....

  17. 21 CFR 182.1781 - Sodium aluminum phosphate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Sodium aluminum phosphate. 182.1781 Section 182.1781 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Food Substances § 182.1781 Sodium aluminum phosphate. (a) Product. Sodium aluminum phosphate....

  18. 21 CFR 582.1781 - Sodium aluminum phosphate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Sodium aluminum phosphate. 582.1781 Section 582.1781 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Additives § 582.1781 Sodium aluminum phosphate. (a) Product. Sodium aluminum phosphate. (b) Conditions...

  19. 21 CFR 582.1781 - Sodium aluminum phosphate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Sodium aluminum phosphate. 582.1781 Section 582.1781 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Additives § 582.1781 Sodium aluminum phosphate. (a) Product. Sodium aluminum phosphate. (b) Conditions...

  20. 21 CFR 582.1781 - Sodium aluminum phosphate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Sodium aluminum phosphate. 582.1781 Section 582.1781 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Additives § 582.1781 Sodium aluminum phosphate. (a) Product. Sodium aluminum phosphate. (b) Conditions...

  1. 21 CFR 582.1781 - Sodium aluminum phosphate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Sodium aluminum phosphate. 582.1781 Section 582.1781 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Additives § 582.1781 Sodium aluminum phosphate. (a) Product. Sodium aluminum phosphate. (b) Conditions...

  2. 21 CFR 182.1781 - Sodium aluminum phosphate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Sodium aluminum phosphate. 182.1781 Section 182.1781 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Food Substances § 182.1781 Sodium aluminum phosphate. (a) Product. Sodium aluminum phosphate....

  3. 21 CFR 182.1781 - Sodium aluminum phosphate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Sodium aluminum phosphate. 182.1781 Section 182...) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Multiple Purpose GRAS Food Substances § 182.1781 Sodium aluminum phosphate. (a) Product. Sodium aluminum phosphate. (b) Conditions of use. This substance is...

  4. 21 CFR 582.1781 - Sodium aluminum phosphate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Sodium aluminum phosphate. 582.1781 Section 582.1781 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Additives § 582.1781 Sodium aluminum phosphate. (a) Product. Sodium aluminum phosphate. (b) Conditions...

  5. 21 CFR 182.1781 - Sodium aluminum phosphate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Sodium aluminum phosphate. 182.1781 Section 182.1781 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Food Substances § 182.1781 Sodium aluminum phosphate. (a) Product. Sodium aluminum phosphate....

  6. 21 CFR 182.6085 - Sodium acid phosphate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Sodium acid phosphate. 182.6085 Section 182.6085 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD... Sodium acid phosphate. (a) Product. Sodium acid phosphate. (b) Conditions of use. This substance...

  7. 21 CFR 582.6085 - Sodium acid phosphate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Sodium acid phosphate. 582.6085 Section 582.6085 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Sodium acid phosphate. (a) Product. Sodium acid phosphate. (b) Conditions of use. This substance...

  8. 21 CFR 182.6085 - Sodium acid phosphate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Sodium acid phosphate. 182.6085 Section 182.6085...) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Sequestrants 1 § 182.6085 Sodium acid phosphate. (a) Product. Sodium acid phosphate. (b) Conditions of use. This substance is generally recognized as safe when used...

  9. 21 CFR 582.6085 - Sodium acid phosphate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Sodium acid phosphate. 582.6085 Section 582.6085 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Sodium acid phosphate. (a) Product. Sodium acid phosphate. (b) Conditions of use. This substance...

  10. 21 CFR 182.6085 - Sodium acid phosphate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Sodium acid phosphate. 182.6085 Section 182.6085 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD... Sodium acid phosphate. (a) Product. Sodium acid phosphate. (b) Conditions of use. This substance...

  11. 21 CFR 582.6085 - Sodium acid phosphate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Sodium acid phosphate. 582.6085 Section 582.6085 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Sodium acid phosphate. (a) Product. Sodium acid phosphate. (b) Conditions of use. This substance...

  12. 21 CFR 182.6085 - Sodium acid phosphate.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Sodium acid phosphate. 182.6085 Section 182.6085 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD... Sodium acid phosphate. (a) Product. Sodium acid phosphate. (b) Conditions of use. This substance...

  13. 21 CFR 582.6085 - Sodium acid phosphate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Sodium acid phosphate. 582.6085 Section 582.6085 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Sodium acid phosphate. (a) Product. Sodium acid phosphate. (b) Conditions of use. This substance...

  14. 21 CFR 522.1883 - Prednisolone sodium phosphate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Prednisolone sodium phosphate. 522.1883 Section... § 522.1883 Prednisolone sodium phosphate. (a) Specifications. Each milliliter of solution contains 20 milligrams (mg) prednisolone sodium phosphate (equivalent to 14.88 mg of prednisolone). (b) Sponsor. See...

  15. 21 CFR 522.1883 - Prednisolone sodium phosphate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Prednisolone sodium phosphate. 522.1883 Section... § 522.1883 Prednisolone sodium phosphate. (a) Specifications. Each milliliter of solution contains 20 milligrams (mg) prednisolone sodium phosphate (equivalent to 14.88 mg of prednisolone). (b) Sponsor. See...

  16. 21 CFR 522.1883 - Prednisolone sodium phosphate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Prednisolone sodium phosphate. 522.1883 Section... § 522.1883 Prednisolone sodium phosphate. (a) Specifications. Each milliliter of solution contains 20 milligrams (mg) prednisolone sodium phosphate (equivalent to 14.88 mg of prednisolone). (b) Sponsor. See...

  17. 21 CFR 522.1883 - Prednisolone sodium phosphate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Prednisolone sodium phosphate. 522.1883 Section... § 522.1883 Prednisolone sodium phosphate. (a) Specifications. Each milliliter of solution contains 20 milligrams (mg) prednisolone sodium phosphate (equivalent to 14.88 mg of prednisolone). (b) Sponsor. See...

  18. 21 CFR 182.6085 - Sodium acid phosphate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Sodium acid phosphate. 182.6085 Section 182.6085 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD... Sodium acid phosphate. (a) Product. Sodium acid phosphate. (b) Conditions of use. This substance...

  19. 21 CFR 582.6085 - Sodium acid phosphate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Sodium acid phosphate. 582.6085 Section 582.6085 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Sodium acid phosphate. (a) Product. Sodium acid phosphate. (b) Conditions of use. This substance...

  20. Alkaline and alkaline earth metal phosphate halides and phosphors

    SciTech Connect

    Lyons, Robert Joseph; Setlur, Anant Achyut; Cleaver, Robert John

    2012-11-13

    Compounds, phosphor materials and apparatus related to nacaphite family of materials are presented. Potassium and rubidium based nacaphite family compounds and phosphors designed by doping divalent rare earth elements in the sites of alkaline earth metals in the nacaphite material families are descried. An apparatus comprising the phosphors based on the nacaphite family materials are presented herein. The compounds presented is of formula A.sub.2B.sub.1-yR.sub.yPO.sub.4X where the elements A, B, R, X and suffix y are defined such that A is potassium, rubidium, or a combination of potassium and rubidium and B is calcium, strontium, barium, or a combination of any of calcium, strontium and barium. X is fluorine, chlorine, or a combination of fluorine and chlorine, R is europium, samarium, ytterbium, or a combination of any of europium, samarium, and ytterbium, and y ranges from 0 to about 0.1.

  1. Long-term craniofacial osteoblast culture on a sodium phosphate and a calcium/sodium phosphate glass.

    PubMed

    Gough, J E; Christian, P; Scotchford, C A; Jones, I A

    2003-08-01

    The aim of this study was to determine the characteristics of human craniofacial osteoblasts cultured on sodium phosphate glass and calcium-sodium phosphate glass in a long-term culture of up to 28 days. The characteristics studied were attachment, proliferation, alkaline phosphatase activity, collagen-1 production, and mineralization. A comparison of the degradation rate, measured by mass loss of the glasses, which are intended for use as a component of a novel degradable composite for craniofacial bone repair, was also performed. It was our hypothesis that the glass would be degradable with a change in degradation rate observed by calcium addition and support osteoblast proliferation and expression of the above characteristics. The inclusion of calcium into the reaction mixture significantly decreased the degradation rate, and it is suggested that the slower degradation is the result of pseudo crosslinking (ionic crosslinks rather than covalent bonding) of the polyphosphate chains by the calcium ions. Therefore, twice as many P-O bonds will need to be hydrolyzed for dissolution of the metal phosphate to occur, therefore greatly reducing the rate of hydrolysis. Osteoblasts were able to attach, spread, and proliferate in a manner comparable with the positive control, as shown by analysis of variance. Formation of a collagen-rich mineralized matrix was also observed. The results presented here suggest that a biocompatible soluble glass has been produced, which has potential to be included in a novel biodegradable craniofacial implant. PMID:12888992

  2. 40 CFR 422.60 - Applicability; description of the sodium phosphates subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... sodium phosphates subcategory. 422.60 Section 422.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PHOSPHATE MANUFACTURING POINT SOURCE CATEGORY Sodium Phosphates Subcategory § 422.60 Applicability; description of the sodium phosphates subcategory....

  3. 40 CFR 422.60 - Applicability; description of the sodium phosphates subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... sodium phosphates subcategory. 422.60 Section 422.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PHOSPHATE MANUFACTURING POINT SOURCE CATEGORY Sodium Phosphates Subcategory § 422.60 Applicability; description of the sodium phosphates subcategory....

  4. 40 CFR 422.60 - Applicability; description of the sodium phosphates subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... sodium phosphates subcategory. 422.60 Section 422.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PHOSPHATE MANUFACTURING POINT SOURCE CATEGORY Sodium Phosphates Subcategory § 422.60 Applicability; description of the sodium phosphates subcategory....

  5. 40 CFR 422.60 - Applicability; description of the sodium phosphates subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... sodium phosphates subcategory. 422.60 Section 422.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PHOSPHATE MANUFACTURING POINT SOURCE CATEGORY Sodium Phosphates Subcategory § 422.60 Applicability; description of the sodium phosphates subcategory....

  6. Sodium-Dependent Phosphate Transporters in Osteoclast Differentiation and Function

    PubMed Central

    Dolder, Silvia; Siegrist, Mark; Wagner, Carsten A.; Biber, Jürg; Hernando, Nati; Hofstetter, Willy

    2015-01-01

    Osteoclasts are multinucleated bone degrading cells. Phosphate is an important constituent of mineralized bone and released in significant quantities during bone resorption. Molecular contributors to phosphate transport during the resorptive activity of osteoclasts have been controversially discussed. This study aimed at deciphering the role of sodium-dependent phosphate transporters during osteoclast differentiation and bone resorption. Our studies reveal RANKL-induced differential expression of sodium-dependent phosphate transport protein IIa (NaPi-IIa) transcript and protein during osteoclast development, but no expression of the closely related NaPi-IIb and NaPi-IIc SLC34 family isoforms. In vitro studies employing NaPi-IIa-deficient osteoclast precursors and mature osteoclasts reveal that NaPi-IIa is dispensable for bone resorption and osteoclast differentiation. These results are supported by the analysis of structural bone parameters by high-resolution microcomputed tomography that yielded no differences between adult NaPi-IIa WT and KO mice. By contrast, both type III sodium-dependent phosphate transporters Pit-1 and Pit-2 were abundantly expressed throughout osteoclast differentiation, indicating that they are the relevant sodium-dependent phosphate transporters in osteoclasts and osteoclast precursors. We conclude that phosphate transporters of the SLC34 family have no role in osteoclast differentiation and function and propose that Pit-dependent phosphate transport could be pivotal for bone resorption and should be addressed in further studies. PMID:25910236

  7. Lack of relationship between activity of intestinal alkaline phosphatase and calcium or phosphate absorption.

    PubMed

    Asteggiano, C; Tolosa, N; Pereira, R; Moreno, J; Cañas, F

    1981-01-01

    The effects of vitamin D3 and the aqueous extract of Solanum malacoxylon on intestinal alkaline phosphatase and tissue phosphate content were studied on rachitic chicks treated with large doses of ethane-1-hydroxy-1,1 diphosphonate (EHDP). The EHDP treatment blocks the increase of intestinal calcium or phosphate absorption induced by the vitamin D3, while it has no effects on the rise of intestinal alkaline phosphatase activity or the increment in tissue phosphate content. The lack of correlation between the increment of alkaline phosphatase and that of Ca or phosphate absorption in vitamin D3 plus EHDP treated chicks excludes a participation of the alkaline phosphatase in the mechanism of Ca or P intestinal absorption. The Ca or phosphorus absorption are elicited specifically by 1,25-(OH)2-D3, while alkaline phosphatase activity and phosphate tissue concentration respond to a broader spectrum of stimuli. PMID:6316731

  8. [Case of alkaline esophagitis due to sodium hypochlorite ingestion].

    PubMed

    Hifumi, Toru; Yoshioka, Hayato; Kanemura, Takashi; Kiriu, Nobuaki; Hasegawa, Eijyu; Kato, Hiroshi; Koido, Yuichi

    2010-12-01

    The severity of alkaline esophagitis due to sodium hypochlorite ingestion is variable and the findings of endoscope within 48 hours of ingestion are reported to be associated with its prognosis. We report a good recovery case of grade 2B of alkaline esophagitis, which was treated with close observation. The patient was 59-year old man. He was found lying on the bed by his wife, after drinking bactericidal agents (Jianok) and kitchen cleaner (Magiclean) for suicide attempt. After his trachea was intubated, he underwent upper gastrointestinal scope, which displayed circumferential ulcers at the lower esophagus. He was diagnosed as having a Grade 2B alkaline esophagitis, which was associated with a higher probability of stricture or perforation. On the 14th day of the admission, the 2nd endoscope was performed and no esophageal strictures were detected. He was extubated and started oral feeding on the 15th day. After that, his hospital course was uneventful and was discharged on the 18th day. 6 months have passed since he left hospital. No esophageal strictures were detected so far. PMID:21268820

  9. 21 CFR 524.1883 - Prednisolone sodium phosphate-neomycin sulfate ophthalmic ointment.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Prednisolone sodium phosphate-neomycin sulfate... DOSAGE FORM NEW ANIMAL DRUGS § 524.1883 Prednisolone sodium phosphate-neomycin sulfate ophthalmic ointment. (a) Specifications. Prednisolone sodium phosphate-neomycin sulfate ophthalmic ointment...

  10. 21 CFR 524.1883 - Prednisolone sodium phosphate-neomycin sulfate ophthalmic ointment.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Prednisolone sodium phosphate-neomycin sulfate... DOSAGE FORM NEW ANIMAL DRUGS § 524.1883 Prednisolone sodium phosphate-neomycin sulfate ophthalmic ointment. (a) Specifications. Prednisolone sodium phosphate-neomycin sulfate ophthalmic ointment...

  11. 21 CFR 524.1883 - Prednisolone sodium phosphate-neomycin sulfate ophthalmic ointment.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Prednisolone sodium phosphate-neomycin sulfate... DOSAGE FORM NEW ANIMAL DRUGS § 524.1883 Prednisolone sodium phosphate-neomycin sulfate ophthalmic ointment. (a) Specifications. Prednisolone sodium phosphate-neomycin sulfate ophthalmic ointment...

  12. 21 CFR 524.1883 - Prednisolone sodium phosphate-neomycin sulfate ophthalmic ointment.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Prednisolone sodium phosphate-neomycin sulfate... DOSAGE FORM NEW ANIMAL DRUGS § 524.1883 Prednisolone sodium phosphate-neomycin sulfate ophthalmic ointment. (a) Specifications. Prednisolone sodium phosphate-neomycin sulfate ophthalmic ointment...

  13. Phase equilibrium of sodium bis(2-ethylhexyl) phosphate/water/n-heptane/sodium chloride microemulsion

    SciTech Connect

    Shioi, Akihisada; Harada, Makoto; Matsumoto, Keishi )

    1991-09-19

    The microemulsion phase diagram for the sodium bis(2-ethylhexyl) phosphate (SDEHP)/water/n-heptane/sodium chloride system is reported. The salinity effects on the phase diagram are discussed in detail. Cylindrical aggregates were found to exist in the oil-rich region and disklike aggregates in the brine-rich region. The middle-phase microemulsion in equilibrium with both the excess brine and oil phases was concluded to be composed of these microstructures. Sodium bis(2-ethylhexyl) phosphate has a common hydrocarbon tail with sodium bis(2-ethylhexyl) sulfosuccinate (AOT), but the phase equilibrium and the structures of the microemulsion phases in SDEHP system were much different from those in the AOT case. The differences were attributed to those in the shapes of aggregates for the two cases.

  14. A combined sodium phosphate and sodium sulfide pretreatment for enhanced enzymatic digestibility and delignification of corn stover.

    PubMed

    Qing, Qing; Zhou, Linlin; Guo, Qi; Huang, Meizi; He, Yucai; Wang, Liqun; Zhang, Yue

    2016-10-01

    Na3PO4 and Na2S were employed as efficient alkaline catalysts for the pretreatment of corn stover. To systematically obtain optimal conditions, the effects of critical pretreatment parameters including sodium phosphate concentration (1-4%), sulfidity (0-20%), pretreatment temperature (100-120°C), and reaction time (20-60min) on the reducing sugar yield of pretreated substrates were evaluated in a lab-scale using the response surface methodology. Pretreated under the sodium phosphate concentration of 4%, sulfidity of 10%, temperature of 120°C, and reaction time of 40min, the reducing sugar yield and glucose yield of the pretreated corn stover achieved 91.11% and 64.01%, respectively, with a moderate enzyme loading of 30FPU/g substrate. Additionally, a strong correlation (R(2)=0.971 and R(2)=0.954) between the delignification and the reducing sugar yield (or glucose yield) was observed by this pretreatment method. These results evidently support that the combined Na3PO4-Na2S pretreatment is an effective and feasible method for processing lignocellulosic biomass. PMID:27371793

  15. The interaction of phosphate coatings on a carbon steel surface with a sodium nitrite and silicate solution

    NASA Astrophysics Data System (ADS)

    Ramanauskas, R.; Girčienė, O.; Gudavičiūtė, L.; Selskis, A.

    2015-02-01

    Mono-cation PZn, bi-cation PZnCa, PZnNi and three-cation PZnNiMn crystalline phosphate coatings were modified with an inhibitor mixture: a sodium nitrite and sodium silicate solution with the aim to establish the reasons of protective ability enhancement of passive films on a carbon steel surface in an alkaline media. The SEM, EDS, XRD and XPS techniques were applied for the structural, phase and composition characterization of the phosphate coatings, voltammetric measurements were carried out to determine the passive layer protective ability, while EIS studies yielded information on the coatings porosity. Compact films of Si compounds were formed on the surface of the phosphate coatings during their modification procedure, which was accompanied by an increase in the protective ability of phosphate layer. A higher porosity and regularly shaped crystallites of the phosphate layer were favourable for accumulation of a greater amount of Si in the modified coatings. The protective ability of the modified coatings remains fairly pronounced, which testifies that the phosphate layer porosity is not the only factor influencing the corrosion behaviour of the coating. The difference in the nature of Si compounds comprising modified phosphate coatings leads to the differences in their protective ability.

  16. 21 CFR 522.163 - Betamethasone dipropionate and betamethasone sodium phosphate aqueous suspension.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... sodium phosphate aqueous suspension. 522.163 Section 522.163 Food and Drugs FOOD AND DRUG ADMINISTRATION... phosphate aqueous suspension. (a) Specifications. Betamethasone dipropionate and betamethasone sodium phosphate aqueous suspension is a sterile aqueous suspension. Each milliliter of the suspension contains...

  17. 21 CFR 522.163 - Betamethasone dipropionate and betamethasone sodium phosphate aqueous suspension.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... sodium phosphate aqueous suspension. 522.163 Section 522.163 Food and Drugs FOOD AND DRUG ADMINISTRATION... phosphate aqueous suspension. (a) Specifications. Betamethasone dipropionate and betamethasone sodium phosphate aqueous suspension is a sterile aqueous suspension. Each milliliter of the suspension contains...

  18. 40 CFR 422.60 - Applicability; description of the sodium phosphates subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 30 2013-07-01 2012-07-01 true Applicability; description of the sodium phosphates subcategory. 422.60 Section 422.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PHOSPHATE MANUFACTURING POINT SOURCE CATEGORY Sodium Phosphates Subcategory § 422.60...

  19. 21 CFR 184.1697 - Riboflavin-5′-phosphate (sodium).

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Riboflavin-5â²-phosphate (sodium). 184.1697 Section 184.1697 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Affirmed as GRAS § 184.1697 Riboflavin-5′-phosphate (sodium). (a) Riboflavin-5′-phosphate...

  20. 21 CFR 522.163 - Betamethasone dipropionate and betamethasone sodium phosphate aqueous suspension.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... sodium phosphate aqueous suspension. 522.163 Section 522.163 Food and Drugs FOOD AND DRUG ADMINISTRATION... phosphate aqueous suspension. (a) Specifications. Betamethasone dipropionate and betamethasone sodium phosphate aqueous suspension is a sterile aqueous suspension. Each milliliter of the suspension contains...

  1. 21 CFR 522.163 - Betamethasone dipropionate and betamethasone sodium phosphate aqueous suspension.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... sodium phosphate aqueous suspension. 522.163 Section 522.163 Food and Drugs FOOD AND DRUG ADMINISTRATION... phosphate aqueous suspension. (a) Specifications. Betamethasone dipropionate and betamethasone sodium phosphate aqueous suspension is a sterile aqueous suspension. Each milliliter of the suspension contains...

  2. 21 CFR 522.163 - Betamethasone dipropionate and betamethasone sodium phosphate aqueous suspension.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... sodium phosphate aqueous suspension. 522.163 Section 522.163 Food and Drugs FOOD AND DRUG ADMINISTRATION... phosphate aqueous suspension. (a) Specifications. Betamethasone dipropionate and betamethasone sodium phosphate aqueous suspension is a sterile aqueous suspension. Each milliliter of the suspension contains...

  3. Evaluation of Intestinal Phosphate Binding to Improve the Safety Profile of Oral Sodium Phosphate Bowel Cleansing

    PubMed Central

    Robijn, Stef; Vervaet, Benjamin A.; D’Haese, Patrick C.; Verhulst, Anja

    2015-01-01

    Prior to colonoscopy, bowel cleansing is performed for which frequently oral sodium phosphate (OSP) is used. OSP results in significant hyperphosphatemia and cases of acute kidney injury (AKI) referred to as acute phosphate nephropathy (APN; characterized by nephrocalcinosis) are reported after OSP use, which led to a US-FDA warning. To improve the safety profile of OSP, it was evaluated whether the side-effects of OSP could be prevented with intestinal phosphate binders. Hereto a Wistar rat model of APN was developed. OSP administration (2 times 1.2 g phosphate by gavage) with a 12h time interval induced bowel cleansing (severe diarrhea) and significant hyperphosphatemia (21.79 ± 5.07 mg/dl 6h after the second OSP dose versus 8.44 ± 0.97 mg/dl at baseline). Concomitantly, serum PTH levels increased fivefold and FGF-23 levels showed a threefold increase, while serum calcium levels significantly decreased from 11.29 ± 0.53 mg/dl at baseline to 8.68 ± 0.79 mg/dl after OSP. OSP administration induced weaker NaPi-2a staining along the apical proximal tubular membrane. APN was induced: serum creatinine increased (1.5 times baseline) and nephrocalcinosis developed (increased renal calcium and phosphate content and calcium phosphate deposits on Von Kossa stained kidney sections). Intestinal phosphate binding (lanthanum carbonate or aluminum hydroxide) was not able to attenuate the OSP induced side-effects. In conclusion, a clinically relevant rat model of APN was developed. Animals showed increased serum phosphate levels similar to those reported in humans and developed APN. No evidence was found for an improved safety profile of OSP by using intestinal phosphate binders. PMID:25790436

  4. Alkaline resistant phosphate glasses and method of preparation and use thereof

    DOEpatents

    Brow, Richard K.; Reis, Signo T.; Velez, Mariano; Day, Delbert E.

    2010-01-26

    A substantially alkaline resistant calcium-iron-phosphate (CFP) glass and methods of making and using thereof. In one application, the CFP glass is drawn into a fiber and dispersed in cement to produce glass fiber reinforced concrete (GFRC) articles having the high compressive strength of concrete with the high impact, flexural and tensile strength associated with glass fibers.

  5. Phosphate glass electrode with good selectivity for alkaline-earth cations

    USGS Publications Warehouse

    Truesdell, A.H.; Pommer, A.M.

    1963-01-01

    A phosphate glass has been found to have a significant electrode specificity toward alkaline-earth ions. The order of selectivity is 2H + > Ba++ > Sr++ > Ca++ > 2K+ > 2Na+ > Mg++. Exchange properties are discussed in relation to possible structure. Its use to determine activity of Ca++ in natural systems containing Mg++ is suggested.

  6. High-Strength / High Alkaline Resistant Fe-Phosphate Glass Fibers as Concrete Reinforcement

    SciTech Connect

    Mariano Velez

    2008-03-31

    Calcium-iron-phosphate glasses were developed whose chemical durabilities in alkaline solutions (pH 13) were comparable or superior to those of commercial alkaline-resistant (AR) silica-based glasses. However, the tensile strength of Ca-Fe-phosphate fibers, after being exposed to alkaline environments, including wet Portland cement pastes, is lower than that of current AR silicate fibers. Another series of Ca-Fe-phosphate glasses were developed with excellent chemical durability in strong acidic solutions (H2SO4, HF), indicating potential applications where silica-based fibers degrade very quickly, including E-glass. The new Ca-Fe-phosphate glasses can be melted and processed 300 to 500°C lower than silica-based glasses. This offers the possibility of manufacturing glass fibers with lower energy costs by 40-60% and the potential to reduce manufacturing waste and lower gas emissions. It was found that Ca-Fe-phosphate melts can be continuously pulled into fibers depending on the slope of the viscosity-temperature curve and with viscosity ~100 poise, using multi-hole Pt/Rh bushings.

  7. 21 CFR 184.1697 - Riboflavin-5′-phosphate (sodium).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Riboflavin-5â²-phosphate (sodium). 184.1697... SAFE Listing of Specific Substances Affirmed as GRAS § 184.1697 Riboflavin-5′-phosphate (sodium). (a) Riboflavin-5′-phosphate (sodium) (C17H20N4O9PNa·2H2O, CAS Reg. No 130-40-5) occurs as the dihydrate in...

  8. 21 CFR 184.1697 - Riboflavin-5′-phosphate (sodium).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Riboflavin-5â²-phosphate (sodium). 184.1697 Section... SAFE Listing of Specific Substances Affirmed as GRAS § 184.1697 Riboflavin-5′-phosphate (sodium). (a) Riboflavin-5′-phosphate (sodium) (C17H20N4O9PNa·2H2O, CAS Reg. No 130-40-5) occurs as the dihydrate in...

  9. 21 CFR 184.1697 - Riboflavin-5′-phosphate (sodium).

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Riboflavin-5â²-phosphate (sodium). 184.1697... SAFE Listing of Specific Substances Affirmed as GRAS § 184.1697 Riboflavin-5′-phosphate (sodium). (a) Riboflavin-5′-phosphate (sodium) (C17H20N4O9PNa·2H2O, CAS Reg. No 130-40-5) occurs as the dihydrate in...

  10. 21 CFR 184.1697 - Riboflavin-5′-phosphate (sodium).

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Riboflavin-5â²-phosphate (sodium). 184.1697... SAFE Listing of Specific Substances Affirmed as GRAS § 184.1697 Riboflavin-5′-phosphate (sodium). (a) Riboflavin-5′-phosphate (sodium) (C17H20N4O9PNa·2H2O, CAS Reg. No 130-40-5) occurs as the dihydrate in...

  11. 21 CFR 520.2345f - Tetracycline phosphate complex and sodium novobiocin capsules.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Tetracycline phosphate complex and sodium novobiocin capsules. 520.2345f Section 520.2345f Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... ANIMAL DRUGS § 520.2345f Tetracycline phosphate complex and sodium novobiocin capsules....

  12. 21 CFR 520.2345f - Tetracycline phosphate complex and sodium novobiocin capsules.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Tetracycline phosphate complex and sodium novobiocin capsules. 520.2345f Section 520.2345f Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... ANIMAL DRUGS § 520.2345f Tetracycline phosphate complex and sodium novobiocin capsules....

  13. Ion Recognition Approach to Volume Reduction of Alkaline Tank Waste by Separation of Sodium Salts

    SciTech Connect

    Levitskaia, Tatiana G.; Lumetta, Gregg J.; Moyer, Bruce A.; Bonnesen, Peter V.

    2006-06-01

    The purpose of this research involving collaboration between Oak Ridge National Laboratory (ORNL) and Pacific Northwest National Laboratory (PNNL) is to explore new approaches to the separation of sodium hydroxide, sodium nitrate, and other sodium salts from high-level alkaline tank waste. The principal potential benefit is a major reduction in disposed waste volume, obviating the building of expensive new waste tanks and reducing the costs of low-activity waste immobilization. Principles of ion recognition are being researched toward discovery of liquid extraction systems that selectively separate sodium hydroxide and sodium nitrate from other waste components. The successful concept of pseudohydroxide extraction using fluorinated alcohols and phenols is being developed at ORNL and PNNL toward a greater understanding of the controlling equilibria, role of solvation, and of synergistic effects involving crown ethers. Studies at PNNL are directed toward new solvent formulation for the practical sodium pseudohydroxide extraction systems.

  14. Relationship between Salivary Alkaline Phosphatase Enzyme Activity and The Concentrations of Salivary Calcium and Phosphate Ions

    PubMed Central

    Jazaeri, Mina; Malekzadeh, Hosein; Abdolsamadi, Hamidreza; Rezaei-Soufi, Loghman; Samami, Mohammad

    2015-01-01

    Although salivary alkaline phosphatase (ALP) can balance deand remineralization processes of enamel, there is no evidence regarding its effects on the concentrations of calcium and phosphate in saliva. The present study aims to determine the relationship between salivary ALP activity and the concentrations of calcium and phosphate in saliva. In this cross-sectional study, we evaluated salivary markers in 120 males, ages 19 to 44 years. All participants provided 5 mL of unstimulated whole saliva and the level of enzyme activity as well as calcium and phosphate concentrations were measured using a colorimetric method. Data were gathered and analyzed by statistical package for social sciences (SPSS) 13.00 using Pearson correlation test. A p value of <0.05 was considered statistically significant. The mean age of participants in the present study was 32.95 ± 8.09 years. The mean pH of saliva was 6.65 ± 0.62. Salivary parameters included average ALP activity (5.04 ± 1.866 U/dL), calcium (4.77 ± 0.877 mg/dL) and phosphate (10.38 ± 2.301 mg/dL). Pearson correlation test showed no significant relationship between ALP activity and calcium and phosphate concentrations in saliva (p>0.05). According to the results of the present study, there was no significant relation between salivary ALP activity and calcium and phosphate concentrations in saliva. However, further research is highly recommended. PMID:25870846

  15. Relationship between Salivary Alkaline Phosphatase Enzyme Activity and The Concentrations of Salivary Calcium and Phosphate Ions.

    PubMed

    Jazaeri, Mina; Malekzadeh, Hosein; Abdolsamadi, Hamidreza; Rezaei-Soufi, Loghman; Samami, Mohammad

    2015-01-01

    Although salivary alkaline phosphatase (ALP) can balance deand remineralization processes of enamel, there is no evidence regarding its effects on the concentrations of calcium and phosphate in saliva. The present study aims to determine the relationship between salivary ALP activity and the concentrations of calcium and phosphate in saliva. In this cross-sectional study, we evaluated salivary markers in 120 males, ages 19 to 44 years. All participants provided 5 mL of unstimulated whole saliva and the level of enzyme activity as well as calcium and phosphate concentrations were measured using a colorimetric method. Data were gathered and analyzed by statistical package for social sciences (SPSS) 13.00 using Pearson correlation test. A p value of <0.05 was considered statistically significant. The mean age of participants in the present study was 32.95 ± 8.09 years. The mean pH of saliva was 6.65 ± 0.62. Salivary parameters included average ALP activity (5.04 ± 1.866 U/dL), calcium (4.77 ± 0.877 mg/dL) and phosphate (10.38 ± 2.301 mg/dL). Pearson correlation test showed no significant relationship between ALP activity and calcium and phosphate concentrations in saliva (p>0.05). According to the results of the present study, there was no significant relation between salivary ALP activity and calcium and phosphate concentrations in saliva. However, further research is highly recommended. PMID:25870846

  16. 21 CFR 201.307 - Sodium phosphates; package size limitation, warnings, and directions for over-the-counter sale.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Sodium phosphates; package size limitation... Requirements for Specific Drug Products § 201.307 Sodium phosphates; package size limitation, warnings, and... and Drug Administration indicate that multiple container sizes of sodium phosphates oral...

  17. 21 CFR 201.307 - Sodium phosphates; package size limitation, warnings, and directions for over-the-counter sale.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 4 2011-04-01 2011-04-01 false Sodium phosphates; package size limitation... Requirements for Specific Drug Products § 201.307 Sodium phosphates; package size limitation, warnings, and... and Drug Administration indicate that multiple container sizes of sodium phosphates oral...

  18. Phosphorane lifetime and stereo-electronic effects along the alkaline hydrolysis of phosphate esters.

    PubMed

    Pereira, Eufrásia S; Da Silva, Júlio C S; Brandão, Tiago A S; Rocha, Willian R

    2016-07-21

    Hybrid quantum mechanical/effective fragment potential (QM/EFP) calculations, in conjunction with the quantum theory of atoms in molecules (QTAIM) and energy decomposition analysis (EDA), were employed to investigate the reaction mechanism and stereo-electronic effects along the alkaline hydrolysis of the monoethyl phosphate dianion (MEP) and the diethylphosphate monoanion (DEP). Reactions proceed through a synchronous bimolecular ANDN mechanism for MEP and a stepwise (AN + DN) mechanism for DEP, with the formation of a phosphorane intermediate, having an overall reaction free energy and barrier of 11.5 and 43.0 kcal mol(-1), respectively. In addition, ab initio molecular dynamics simulations were performed to investigate the stability of the phosphorane pentacoordinate intermediate observed in the reaction of the phosphate diester. The phosphorane intermediate has a lifetime of ∼1 ps after which it decomposes into the corresponding alcohol and phosphate monoester dianion. Electrostatics governs the interaction between the nucleophile and the phosphate ester. However, some degree of covalence in the interaction starts to appear at distances shorter than 2.45 Å for MEP and 2.63 Å for DEP. For the monoester, the electrostatic repulsive terms are the dominant contributions for the formation of the transition state. On the other hand, for the phosphate diester, the formation of the P-OH bond is dominated by associative terms of electrostatic nature. PMID:27332044

  19. Photocatalytic degradation of betamethasone sodium phosphate in aqueous solution using ZnO nanopowder

    NASA Astrophysics Data System (ADS)

    Giahi, M.; Taghavi, H.; Habibi, S.

    2012-12-01

    The photocatalytic degradation of betamethasone sodium phosphate has been investigated in aqueous phase by using ultraviolet (UV) light and ZnO nanopowder. The effect of catalyst loading, irradiation time, pH, addition of oxidizers, effect of alcohol and anion presence on the reaction rate was ascertained and optimum conditions for maximum degradation were determined. The photocatalytic degradation of betamethasone sodium phosphate was strongly influenced by these parameters. The optimum amount of the photocatalyst used is 0.44 g/L. The efficiency of betamethasone sodium phosphate increases with the photo-degradation increase of the irradiation time.

  20. Cellular Performance Comparison of Biomimetic Calcium Phosphate Coating and Alkaline-Treated Titanium Surface

    PubMed Central

    Wei, Mei

    2013-01-01

    The influence of biomimetic calcium phosphate coating on osteoblasts behavior in vitro is not well established yet. In this study, we investigated the behavior of osteoblastic rat osteosarcoma 17/2.8 cells (ROS17/2.8) on two groups of biomaterial surfaces: alkaline-treated titanium surface (ATT) and biomimetic calcium phosphate coated ATT (CaP). The cell attachment, proliferation, differentiation, and morphology on these surfaces were extensively evaluated to reveal the impact of substrate surface on osteoblastic cell responses. It was found that the ROS17/2.8 cells cultured on the ATT surface had higher attachment and proliferation rates compared to those on the CaP surface. Our results also showed that the calcium phosphate coatings generated in this work have an inhibiting effect on osteoblast adhesion and further influenced the proliferation and differentiation of osteoblast compared to the ATT surface in vitro. Cells on the ATT surface also exhibited a higher alkaline phosphatase activity than on the CaP surface after two weeks of culture. Immunofluorescence staining and scanning electron microscopy results showed that the cells adhered and spread faster on the ATT surface than on the CaP surface. These results collectively suggested that substrate surface properties directly influence cell adhesion on different biomaterials, which would result in further influence on the cell proliferation and differentiation. PMID:24455730

  1. Development of a novel calcium phosphate cement composed mainly of calcium sodium phosphate with high osteoconductivity.

    PubMed

    Tanaka, Masashi; Takemoto, Mitsuru; Fujibayashi, Shunsuke; Kawai, Toshiyuki; Tsukanaka, Masako; Takami, Kimiaki; Motojima, Satoshi; Inoue, Hikaru; Nakamura, Takashi; Matsuda, Shuichi

    2014-06-01

    Two novel calcium phosphate cements (CPC) have been developed using calcium sodium phosphate (CSP) as the main ingredient. The first of these cements, labeled CAC, contained CSP, α-tricalcium phosphate (TCP), and anhydrous citric acid, whereas the second, labeled CABC, contained CSP, α-TCP, β-TCP, and anhydrous citric acid. Biopex(®)-R (PENTAX, Tokyo, Japan), which is a commercially available CPC (Com-CPC), and OSferion(®) (Olympus Terumo Biomaterials Corp., Tokyo, Japan), which is a commercially available porous β-TCP, were used as reference controls for analysis. In vitro analysis showed that CABC set in 5.7 ± 0.3 min at 22 °C and had a compressive strength of 86.0 ± 9.7 MPa after 5 days. Furthermore, this material had a compressive strength of 26.7 ± 3.7 MPa after 2 h in physiologic saline. CAC showed a statistically significantly lower compressive strength in the presence of physiologic saline and statistically significantly longer setting times than those of CABC. CABC and CAC exhibited apatite-forming abilities in simulated body fluid that were faster than that of Com-CPC. Samples of the materials were implanted into the femoral condyles of rabbits for in vivo analysis, and subsequent histological examinations revealed that CABC exhibited superior osteoconductivity and equivalent bioresorbability compared with Com-CPC, as well as superior osteoconductivity and bioresorbability compared with CAC. CABC could therefore be used as an alternative bone substitute material. PMID:24671331

  2. Recovery of phosphorus and nitrogen from alkaline hydrolysis supernatant of excess sludge by magnesium ammonium phosphate.

    PubMed

    Bi, Wei; Li, Yiyong; Hu, Yongyou

    2014-08-01

    Magnesium ammonium phosphate (MAP) method was used to recover orthophosphate (PO₄(3-)-P) and ammonium nitrogen (NH4(+)-N) from the alkaline hydrolysis supernatant of excess sludge. To reduce alkali consumption and decrease the pH of the supernatant, two-stage alkaline hydrolysis process (TSAHP) was designed. The results showed that the release efficiencies of PO₄(3-)-P and NH₄(+)-N were 41.96% and 7.78%, respectively, and the pH of the supernatant was below 10.5 under the running conditions with initial pH of 13, volume ratio (sludge dosage/water dosage) of 1.75 in second-stage alkaline hydrolysis reactor, 20 g/L of sludge concentration in first-stage alkaline hydrolysis reactor. The order of parameters influencing MAP reaction was analyzed and the optimized conditions of MAP reaction were predicted through the response surface methodology. The recovery rates of PO₄(3-)-P and NH₄(+)-N were 46.88% and 16.54%, respectively under the optimized conditions of Mg/P of 1.8, pH 9.7 and reaction time of 15 min. PMID:24880806

  3. Responses of Phosphate Transporter Gene and Alkaline Phosphatase in Thalassiosira pseudonana to Phosphine

    PubMed Central

    Fu, Mei; Song, Xiuxian; Yu, Zhiming; Liu, Yun

    2013-01-01

    Phosphine, which is released continuously from sediment, can affect the eco-physiological strategies and molecular responses of phytoplankton. To examine the effects of phosphine on phosphorus uptake and utilization in Thalassiosira pseudonana, we examined the transcriptional level of the phosphate transporter gene (TpPHO) and the activity of alkaline phosphatase (AKP) in relation to supplement of various concentrations of phosphine. TpPHO expression was markedly promoted by phosphine in both the phosphate-deficient and phosphate-4 µM culture. However, high phosphine concentrations can inhibit TpPHO transcription in the declining growth phase. AKP activity was also higher in the phosphine treatment groups than that of the control. It increased with increasing phosphine concentration in the range of 0 to 0.056 µM but was inhibited by higher levels of phosphine. These responses revealed that phosphine can affect phosphate uptake and utilization in T. pseudonana. This result was consistent with the effect of phosphine on algal growth, while TpPHO expression and AKP were even more sensitive to phosphine than algal growth. This work provides a basic understanding for further research about how phosphine affects phytoplankton. PMID:23544096

  4. Temperature dependence of the absorbance of alkaline solutions of 4-nitrophenyl phosphate--a potential source of error in the measurement of alkaline phosphatase activity.

    PubMed

    Burtis, C A; Seibert, L E; Baird, M A; Sampson, E J

    1977-09-01

    The absorbance of an alkaline solution of 4-nitrophenyl phosphate is a function of temperature. Quantitative evaluation of this phenomenon indicates that it (a) depends on the concentration of the compound and is independent of source, buffer concentration, and pH above 9.0; (b) is reversible; (c) is not a result of alkaline hydrolysis or 4-nitrophenol contamination; and (d) correlates with a temperature-induced shift of its absorbance spectrum. The phenomenon may represent a potential analytical problem in methods for alkaline phosphatase in which this compound is the substrate. If thermal equilibrium is not reached and maintained during an alkaline phosphatase assay, the thermochromic response will be included in the measured rate. The magnitude of this error depends on the thermal response and control characteristics of each particular instrument and the reaction conditions under which such an analysis is performed. PMID:19164

  5. Therapeutic Use of Oral Sodium Phosphate (Phosribbon® Combination Granules) in Hereditary Hypophosphatemic Rickets

    PubMed Central

    Ozono, Keiichi; Hasegawa, Yukihiro; Minagawa, Masanori; Adachi, Masanori; Namba, Noriyuki; Kazukawa, Itsuro; Kitaoka, Taichi; Asakura, Yumi; Shimura, Asami; Naito, Yuki

    2014-01-01

    Oral sodium phosphate formulations indicated for hypophosphatemia are commercially available worldwide. In Japan, however, many medical institutes have used hospital dispensary or foreign over-the-counter formulations because no such medication with an indication covered by the health insurance system is domestically available. To address this problem, we initiated the development of Phosribbon®. The present study evaluated the efficacy and safety of Phosribbon® in 16 patients with hereditary hypophosphatemic rickets. The optimal dosage and an administration pattern were also investigated. Administration of the agent resulted in an increase in the level of serum phosphorus in all patients, which implied that the employed dosage was appropriate. The dosage and administration pattern were adjusted based on comprehensive considerations, including changes in clinical laboratory values such as serum phosphorus, alkaline phosphatase and intact PTH, the dosage of a concomitantly administered activated vitamin D formulation and characteristics of individual patients. Adverse drug reactions were observed in 2 patients, neither of which were serious or necessitated therapy dose reduction or discontinuation. We conclude that Phosribbon® is a safe and effective treatment for patients with hypophosphatemic rickets and that dose adjustment in this therapy can be guided by the results of regular clinical examination and renal ultrasonography. (ClinicalTrials.gov Identifier: NCT01237288) PMID:24532956

  6. Formation of hydroxyapatite in soils using calcium citrate and sodium phosphate for control of strontium migration.

    SciTech Connect

    Moore, Robert Charles; Hasan, Ahmed Ali Mohamed; Sanchez, Charles Anthony; Zhao, Hongting; Salas, Fred Manuel; Hasan, Mahmoud A.; Holt, Kathleen Caroline

    2003-08-01

    {sup 90}Sr contamination is a major problem at several U.S. sites. At some sites, {sup 90}Sr has migrated deep underground making site remediation difficult. In this paper, we describe a novel method for precipitation of hydroxyapatite, a strong sorbent for {sup 90}Sr, in soil. The method is based on mixing a solution of calcium citrate and sodium phosphate in soil. As the indigenous soil microorganisms mineralize the citrate, the calcium is released and forms hydroxyapatite. Soil, taken from the Albuquerque desert, was treated with a sodium phosphate solution or a sodium phosphate/calcium citrate solution. TEM and EDS were used to identify hydroxyapatite with CO{sub 3}{sup 2-} substitutions, with a formula of (Ca{sub 4.8}Na{sub 0.2})[(PO{sub 4}){sub 2.8}(CO{sub 3}){sub 0.2}](OH), in the soil treated with the sodium phosphate/calcium citrate solution. Untreated and treated soils were used in batch sorption experiments for Sr uptake. Average Sr uptake was 19.5, 77.0 and 94.7% for the untreated soil, soil treated with sodium phosphate, and soil with apatite, respectively. In desorption experiments, the untreated soil, phosphate treated soil and apatite treated soil released an average of 34.2, 28.8 and 4.8% respectively. The results indicate the potential of forming apatite in soil using soluble reagents for retardation of radionuclide migration.

  7. Sodium Titanium Phosphate as Anode Materials for Aqueous Sodium-ion Batteries

    NASA Astrophysics Data System (ADS)

    Wu, Wei

    Renewable energy technology has become one of the promising energy solutions in the future. However, limited by their cyclic behavior, large scale energy storage devices are needed to boost their adoptions in the market. The existing energy storage technologies have limitations that inhibit their adoptions for large scale applications. Our group suggests that one reasonable technology that might overcome these issues is the neutral pH aqueous electrolyte sodium-ion battery. One potential anode material is NaTi2(PO4)3, which has a relatively flexible NASICON skeleton structure and is known in general to have stable performance characteristics in extreme environments. In this work, there are four objectives to study this potential anode material: 1) Develop a rapid method to synthesize electrochemically functional NaTi2(PO4)3. In this case "Electrochemically functional" means the material can store usable capacity for practical application in a composite electrode. 2) Quantify the effect of intimate carbon on NaTi2(PO4)3 electrochemical functionality. (Electrochemical functionality regards the capacity and rate capability of electrode materials) 3) Investigate the stability of NaTi2(PO 4)3 in pH and thermal extremes and the mechanism of capacity fading under different cycling conditions. 4) Examine the performance of NaTi 2(PO4)3 in high salt concentration electrolyte and Li+ electrolyte. NaTi2(PO4)3 has been successfully synthesized via a rapid microwave method. The highest specific capacity is around 85mAh/g has been demonstrated. The effect of different carbon materials (namely graphite and carbon nanotubes) and different processes of adding them (pre and post- synthesis) on the electrochemical performance for sodium titanium phosphate has been extensively studied. Graphite coated NaTi2(PO4) 3 with carbon nanotubes composite electrode has demonstrated a specific capacity of 130mAh/g around theoretical value at 0.1C rate. The effect of the electrolyte (with

  8. Ion Recognition Approach to Volume Reduction of Alkaline Tank Waste by Separation of Sodium Salts

    SciTech Connect

    Levitskaia, Tatiana G.; Lumetta, Gregg J.; Moyer, Bruce A.; Bonnesen, Peter V.

    2005-06-01

    The purpose of this research involving collaboration between Oak Ridge National Laboratory (ORNL) and Pacific Northwest National Laboratory (PNNL) is to explore new approaches to the separation of sodium hydroxide, sodium nitrate, and other sodium salts from high-level alkaline tank waste. The principal potential benefit is a major reduction in disposed waste volume, obviating the building of expensive new waste tanks and reducing the costs of low-activity waste immobilization. Principles of ion recognition are being researched toward discovery of liquid-liquid extraction systems that selectively separate sodium hydroxide and sodium nitrate from other waste components. The successful concept of pseudohydroxide extraction using fluorinated alcohols and phenols is being developed at ORNL and PNNL toward a greater understanding of the controlling equilibria, role of solvation, and of synergistic effects involving crown ethers. Synthesis efforts are being directed toward enhanced sodium binding by crown ethers, both neutral and proton-ionizable. Studies with real tank waste at PNNL will provide feedback toward solvent compositions that have promising properties.

  9. Ion Recognition Approach to Volume Reduction of Alkaline Tank Waste by Separation of Sodium Salts

    SciTech Connect

    Moyer, Bruce A.; Bonnesen, Peter V.; Custelcean, Radu; Delmau, Laetitia H.; Engle, Nancy L.; Kang, Hyun-Ah; Keever, Tamara J.; Marchand, Alan P.; Gadthula, Srinivas; Gore, Vinayak K.; Huang, Zilin; Sivappa, Rasapalli; Tirunahari, Pavan K.; Levitskaia, Tatiana G.; Lumetta, Gregg J.

    2005-09-26

    The purpose of this research involving collaboration between Oak Ridge National Laboratory (ORNL) and Pacific Northwest National Laboratory (PNNL) is to explore new approaches to the separation of sodium hydroxide, sodium nitrate, and other sodium salts from high-level alkaline tank waste. The principal potential benefit is a major reduction in disposed waste volume, obviating the building of expensive new waste tanks and reducing the costs of vitrification. Principles of ion recognition are being researched toward discovery of liquid-liquid extraction systems that selectively separate sodium hydroxide and sodium nitrate from other waste components. The successful concept of pseudo hydroxide extraction using fluorinated alcohols and phenols is being developed at ORNL and PNNL toward a greater understanding of the controlling equilibria, role of solvation, and of synergistic effects involving crown ethers. Synthesis efforts are being directed toward enhanced sodium binding by crown ethers, both neutral and proton-ionizable. Studies with real tank waste at PNNL will provide feedback toward solvent compositions that have promising properties.

  10. Luminal fructose inhibits rat intestinal sodium-phosphate cotransporter gene expression and phosphate uptake24

    PubMed Central

    Kirchner, Séverine; Muduli, Anjali; Casirola, Donatella; Prum, Kannitha; Douard, Véronique; Ferraris, Ronaldo P

    2008-01-01

    Background While searching by microarray for sugar-responsive genes, we inadvertently discovered that sodium-phosphate cotransporter 2B (NaPi-2b) mRNA concentrations were much lower in fructose-perfused than in glucose-perfused intestines of neonatal rats. Changes in NaPi-2b mRNA abundance by sugars were accompanied by similar changes in NaPi-2b protein abundance and in rates of inorganic phosphate (Pi) uptake. Objective We tested the hypothesis that luminal fructose regulates NaPi-2b. Design We perfused into the intestine fructose, glucose, and non-metabolizable or poorly transported glucose analogs as well as phlorizin. Results NaPi-2b mRNA concentrations and Pi uptake rates in fructose-perfused intestines were ≈30% of those in glucose and its analogs. NaPi-2b inhibition by fructose is specific because the mRNA abundance and activity of the fructose transporter GLUT5 (glucose transporter 5) increased with fructose perfusion, whereas those of other transporters were independent of the perfusate. Plasma Pi after 4 h of perfusion was independent of the perfusate, probably because normal kidneys can maintain normophosphatemia. Inhibiting glucose-6-phosphatase, another fructose-responsive gene, with tungstate or vanadate nonspecifically inhibited NaPi-2b mRNA expression and Pi uptake in both glucose- or fructose-perfused intestines. The AMP kinase (AMPK)–activator AICAR (5-aminoimidazole-4-carboxamide-1-β-D-ribofuranoside) enhanced and the fatty acid synthase–AMPK inhibitor C75 (3-carboxy-4-octyl-2-methylene-butyrolactone trans-4-carboxy-5-octyl-3-methylenebutyrolactone) prevented fructose inhibition of NaPi-2b but had no effect on expression of other transporters. NaPi-2b expression decreased markedly with age and was inhibited by fructose in all age groups. Conclusions Energy levels in enterocytes may play a role in NaPi-2b inhibition by luminal fructose. Consumption of fructose that supplies ≈10% of caloric intake by Americans clearly affects absorption of

  11. Characterization and Oxidation of Chromium(III) by Sodium Hypochlorite in Alkaline Solutions

    SciTech Connect

    Jiang, Huijian; Rao, Linfeng; Zhang, Zhicheng; Rai, Dhanpat

    2006-07-01

    Chromium exists in nuclear waste sludges and is a problematic element in the vitrification process of high-level nuclear wastes. It is therefore necessary to treat the waste sludges to remove chromium prior to vitrification, by caustic leaching or oxidation of Cr(III) to Cr(VI). The objective of this study is to investigate the effect of oligomerization of Cr(III) on its oxidation by hypochlorite in alkaline solutions. Monomeric, dimeric and trimeric Cr(III) species in solution were separated by ion exchange. The kinetics of the oxidation of the separated species by hypochlorite in alkaline solutions was studied by UV/Vis absorption spectroscopy, and compared with the oxidation by hydrogen peroxide previously studied. Results indicate that hypochlorite can oxidize Cr(III) to Cr(VI) in alkaline solutions, but the rate of oxidation by hypochlorite is slower than that by hydrogen peroxide at the same alkalinity and concentrations of oxidants. The rate of oxidation of Cr(III) by both oxidants decreases as the concentration of sodium hydroxide is increased, but the oxidation by hypochlorite seems less affected by the degree of oligomerization of Cr(III) than that by peroxide. Compared with the oxidation by hydrogen peroxide where the major reaction pathway has an inverse order with respect to CNaOH, the oxidation by hypochlorite has a significant reaction pathway independent of [OH?].

  12. XANES Demonstrates the Release of Calcium Phosphates from Alkaline Vertisols to Moderately Acidified Solution.

    PubMed

    Andersson, Karl O; Tighe, Matthew K; Guppy, Christopher N; Milham, Paul J; McLaren, Timothy I; Schefe, Cassandra R; Lombi, Enzo

    2016-04-19

    Calcium phosphate (CaP) minerals may comprise the main phosphorus (P) reserve in alkaline soils, with solubility dependent on pH and the concentration of Ca and/or P in solution. Combining several techniques in a novel way, we studied these phenomena by progressively depleting P from suspensions of two soils (low P) using an anion-exchange membrane (AEM) and from a third soil (high P) with AEM together with a cation-exchange membrane. Depletions commenced on untreated soil, then continued as pH was manipulated and maintained at three constant pH levels: the initial pH (pHi) and pH 6.5 and 5.5. Bulk P K-edge X-ray absorption near-edge structure (XANES) spectroscopy revealed that the main forms of inorganic P in each soil were apatite, a second more soluble CaP mineral, and smectite-sorbed P. With moderate depletion of P at pHi or pH 6.5, CaP minerals became more prominent in the spectra compared to sorbed species. The more soluble CaP minerals were depleted at pH 6.5, and all CaP minerals were exhausted at pH 5.5, showing that the CaP species present in these alkaline soils are soluble with decreases of pH in the range achievable by rhizosphere acidification. PMID:26974327

  13. Severe metabolic changes following oral sodium phosphate in a patient of renal cell carcinoma - On dialysis

    PubMed Central

    Lim, Christopher Thiam Seong

    2016-01-01

    Oral sodium phosphate (OSP), an effective bowel purgative, is available over the counter (OTC) and requires a substantially lower volume than polyethylene glycol-based preparative agents. Rarely, OSP consumption has been associated with acute hypocalcemia and hyperphosphatemia. We describe a case of chronic kidney disease patient developing symptomatic hypocalcemia following OTC OSP. PMID:27298508

  14. 21 CFR 520.2345f - Tetracycline phosphate complex and sodium novobiocin capsules.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Tetracycline phosphate complex and sodium novobiocin capsules. 520.2345f Section 520.2345f Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.2345f Tetracycline...

  15. Combined Utilization of Cation Exchanger and Neutral Receptor to Volume Reduction of Alkaline Tank Waste by Separation of Sodium Salts

    SciTech Connect

    Levitskaia, Tatiana G.; Lumetta, Gregg J.; Moyer, Bruce A.

    2004-03-29

    In this report, novel approaches to the selective liquid-liquid extraction separation of sodium hydroxide and sodium nitrate from high-level alkaline tank waste will be discussed. Sodium hydroxide can be successfully separated from alkaline tank-waste supernatants by weakly acidic lipophilic hydroxy compounds via a cation-exchange mechanism referred to as pseudo hydroxide extraction. In a multi-cycle process, as sodium hydroxide in the aqueous phase becomes depleted, it is helpful to have a neutral sodium receptor in the extraction system to exploit the high nitrate concentration in the waste solution to promote sodium removal by an ion-pair extraction process. Simultaneous utilization of an ionizable organic hydroxy compound and a neutral extractant (crown ether) in an organic phase results in the synergistic enhancement of ion exchange and improved separation selectivity due to the receptor's strong and selective sodium binding. Moreover, combination of the hydroxy compound and the crown ether provides for mutually increased solubility, even in a non-polar organic solvent. Accordingly, application of Isopar{reg_sign} L, a kerosene-like alkane solvent, becomes feasible. This investigation involves examination of such dual-mechanism extraction phases for sodium extraction from simulated and actual salt cake waste solutions. Sodium salts can be regenerated upon the contact of the loaded extraction phases with water. Finally, conditions of potential extraction/strip cycling will be discussed.

  16. Effect of sodium phosphate supplementation on repeated high-intensity cycling efforts.

    PubMed

    Brewer, C P; Dawson, B; Wallman, K E; Guelfi, K J

    2015-01-01

    Limited research has investigated how sodium phosphate supplementation affects exercise performance typical of athletic competition and whether any effects linger in the short term. This study examined the effect of sodium phosphate supplementation on a cycling protocol consisting of repeated-sprint (4 sets of 6 × 15 s) and time-trial (2 × 5 min) efforts on day 1 and 4 post-loading. Trained male cyclists (VO(2peak) 5.3 L · min⁻¹) were randomised to 6 days of sodium phosphate supplementation (50 mg · kg·fat-free-mass⁻¹ · day⁻¹; n = 7) or placebo (n = 10). Performance was assessed at baseline and 1 and 4 days post-supplementation on an air-braked cycle ergometer. Compared with baseline, the sodium phosphate group recorded significantly improved (P < 0.05) work and mean power output values in both the sprint (baseline, 259 kJ/719 W; day 1, 271 kJ/754 W; day 4, 271 kJ/753 W) and time-trial (baseline, 225 kJ/374 W; day 1, 235 kJ/398 W; day 4, 236 kJ/393 W) aspects of the performance test post-loading. In the placebo group, no differences (P > 0.05) in total work or power output were noted in response to supplementation. In summary, sodium phosphate supplementation improved repeated-sprint and time-trial cycling efforts both 1 and 4 days post-loading in trained cyclists. PMID:25494032

  17. Alkaline phosphatase assay using a near-infrared fluorescent substrate merocyanine 700 phosphate.

    PubMed

    Gong, Haibiao; Little, Garrick; Cradduck, Mark; Draney, Daniel R; Padhye, Nisha; Olive, D Michael

    2011-05-15

    Alkaline phosphatase (ALP) is a phosphomonoester hydrolase that is commonly used as a conjugating enzyme in biological research. A wide variety of substrates have been developed to assay its activity. In this study, we developed an ALP assay method utilizing merocyanine 700 (MC700) based substrate MC700 phosphate (MC700p). MC700 is a near-infrared fluorescent merocyanine dye, and has excitation/emission maxima at 686 nm/722 nm in ALP assay buffer. Upon hydrolysis by ALP, MC700p is converted to MC700. The fluorescence of MC700 is dependent on the pH and detergent concentration in the buffer. The fluorescence signal produced by MC700p hydrolysis is linearly related to the ALP amount and substrate concentration. A stop solution containing EDTA could be used to stop the ALP/MC700p reaction. It was also demonstrated that MC700p could substitute pNpp as the ALP substrate in a commercial 17β-Estradiol enzyme immunoassay kit. PMID:21482307

  18. Arsenate transport by sodium/phosphate cotransporter type IIb

    SciTech Connect

    Villa-Bellosta, Ricardo; Sorribas, Victor

    2010-08-15

    Arsenic is a metalloid that causes the dysfunction of critical enzymes, oxidative stress, and malignancies. In recent years several transporters of As{sup III} have been identified, including aquaglyceroporins (AQP) and multidrug resistance proteins (MRP). As{sup V} transport, however, has not been sufficiently studied because it has been assumed that arsenate is taken up by mammalian cells through inorganic phosphate (Pi) transporters. In this paper we have analyzed the role of Pi transporters in the uptake of arsenate by directly using {sup 73}As{sup V} as a radiotracer in phosphate transporter-expressing Xenopus laevis oocytes. The affinities of Pi transporters for H{sub 3}AsO{sub 4} were lower than the affinities for Pi. NaPiIIa, NaPiIIc, Pit1, and Pit2 showed a K{sub m} for arsenate that was > 1 mM (i.e., at least ten times lower than the affinities for Pi). The NaPiIIb isoform showed the highest affinity for As{sup V} in mouse (57 {mu}M), rat (51 {mu}M), and human (9.7 {mu}M), which are very similar to the affinities for Pi. Therefore, NaPiIIb can have a prominent role in the toxicokinetics of arsenic following oral exposure to freshwater or food contaminated with As{sup V}.

  19. Arsenic fractionation and bioaccessibility in two alkaline Texas soils incubated with sodium arsenate.

    PubMed

    Datta, Rupali; Makris, Konstantinos C; Sarkar, Dibyendu

    2007-05-01

    Elevated arsenic (As) concentrations in urban soils with prolonged arsenical pesticide application history have increased the risk associated with accidental hand-to-mouth soil ingestion by children. Earlier work by the authors suggested that the conservative statement of 100% As bioaccessibility in soils was not valid for a set of acidic soils incubated with sodium arsenate. In this study, two alkaline Texas soils incubated with a commonly used As pesticide (sodium arsenate) were evaluated for their potential in reducing soil As bioaccessibility. The objective of this study was to evaluate the effects of incubation time and As load on soil As fractionation and bioaccessibility. Soils were subjected to a sequential As fractionation scheme, and bioaccessible As was quantified using an in vitro stomach phase test. Results showed a reduction in the water-soluble As fraction with incubation time (after 4 months), which remained unchanged after 12 months. This reduction with time was accompanied by an increase in the NaOH- and H(2)SO(4)-extractable As fractions, suggesting As sorption by amorphous Fe/Al hydroxides and/or Ca/Mg compounds, respectively. Organic/sulfides-bound As increased with incubation time after 12 months but not after 4 months of incubation. The aging effect was also observed with the amount of bioaccessible As at all As loads, showing significant positive correlations with the water-extractable and exchangeable As fractions. Bioaccessible As concentrations even after 12 months of incubation were not significantly reduced, suggesting that natural attenuation might prove inadequate to control As bioaccessibility in these alkaline soils. PMID:17387422

  20. Stability of Diphenhydramine Hydrochloride, Lorazepam, and Dexamethasone Sodium Phosphate in 0.9% Sodium Chloride Stored in Polypropylene Syringes.

    PubMed

    Anderson, Collin R; Halford, Zachery; MacKay, Mark

    2015-01-01

    Chemotherapy induced nausea and vomiting is problematic for many patients undergoing chemotherapy. Multiple-drug treatments have been developed to mitigate chemotherapy induced nausea and vomiting. A patient-controlled infusion of diphenhydramine hydrochloride, lorazepam, and dexamethasone sodium phosphate has been studied in patients who are refractory to first-line therapy. Unfortunately, the physical and chemical compatibility of this three-drug combination is not available in the published literature. Chemical compatibility was evaluated using high-performance liquid chromatography with ultraviolet detection. Visual observation was employed to detect change in color, clarity, or gas evolution. Turbidity and pH measurements were performed in conjunction with visual observation at hours 0, 24, and 48. Results showed that diphenhydramine hydrochloride 4 mg/mL, lorazepam 0.16 mg/mL, and dexamethasone sodium phosphate 0.27 mg/mL in 0.9% sodium chloride stored in polypropylene syringes were compatible, and components retained greater than 95% of their original concentration over 48 hours when stored at room temperature. PMID:26625573

  1. Synthesis, structural and electrochemical properties of sodium nickel phosphate for energy storage devices.

    PubMed

    Minakshi, Manickam; Mitchell, David; Jones, Rob; Alenazey, Feraih; Watcharatharapong, Teeraphat; Chakraborty, Sudip; Ahuja, Rajeev

    2016-06-01

    Electrochemical energy production and storage at large scale and low cost, is a critical bottleneck in renewable energy systems. Oxides and lithium transition metal phosphates have been researched for over two decades and many technologies based on them exist. Much less work has been done investigating the use of sodium phosphates for energy storage. In this work, the synthesis of sodium nickel phosphate at different temperatures is performed and its performance evaluated for supercapacitor applications. The electronic properties of polycrystalline NaNiPO4 polymorphs, triphylite and maricite, t- and m-NaNiPO4 are calculated by means of first-principle calculations based on spin-polarized Density Functional Theory (DFT). The structure and morphology of the polymorphs were characterized and validated experimentally and it is shown that the sodium nickel phosphate (NaNiPO4) exists in two different forms (triphylite and maricite), depending on the synthetic temperature (300-550 °C). The as-prepared and triphylite forms of NaNiPO4vs. activated carbon in 2 M NaOH exhibit the maximum specific capacitance of 125 F g(-1) and 85 F g(-1) respectively, at 1 A g(-1); both having excellent cycling stability with retention of 99% capacity up to 2000 cycles. The maricite form showed 70 F g(-1) with a significant drop in capacity after just 50 cycles. These results reveal that the synthesized triphylite showed a high performance energy density of 44 Wh kg(-1) which is attributed to the hierarchical structure of the porous NaNiPO4 nanosheets. At a higher temperature (>400 °C) the maricite form of NaNiPO4 possesses a nanoplate-like (coarse and blocky) structure with a large skewing at the intermediate frequency that is not tolerant of cycling. Computed results for the sodium nickel phosphate polymorphs and the electrochemical experimental results are in good agreement. PMID:27189034

  2. Investigation of ionic transport in sodium scandium phosphate (NSP) and related compounds

    NASA Astrophysics Data System (ADS)

    Bhat, Kaustubh; Blügel, Stefan; Lustfeld, Hans

    Sodium ionic conductors offer significant advantages for application in large scale energy storage systems. In this study, we investigate the different pathways available for sodium ion conduction in NSP and calculate energy barriers for ionic transport using Density Functional Theory (DFT) and the Nudged Elastic Band Method. We identify the structural parameters that reduce the energy barrier, by calculating the influence of positive and negative external pressure on the energy barrier. Lattice strain can be introduced by cation or anion substitution within the NASICON structure. We substitute the scandium atom with other trivalent atoms such as aluminium and yttrium, and calculate the resulting energy barriers. Sodium thiophosphate (Na3PS4) has previously shown about two orders of magnitude higher ionic conductivity than sodium phosphate (Na3PO4). We investigate the effect of substituting oxygen with sulphur in NSP. We acknowledge discussions with our experimental colleagues F. Tietz and M. Guin toward this work

  3. TcPho91 is a contractile vacuole phosphate sodium symporter that regulates phosphate and polyphosphate metabolism in Trypanosoma cruzi.

    PubMed

    Jimenez, Veronica; Docampo, Roberto

    2015-09-01

    We have identified a phosphate transporter (TcPho91) localized to the bladder of the contractile vacuole complex (CVC) of Trypanosoma cruzi, the etiologic agent of Chagas disease. TcPho91 has 12 transmembrane domains, an N-terminal regulatory SPX (named after SYG1, Pho81 and XPR1) domain and an anion permease domain. Functional expression in Xenopus laevis oocytes followed by two-electrode voltage clamp showed that TcPho91 is a low-affinity transporter with a Km for Pi in the millimolar range, and sodium-dependency. Epimastigotes overexpressing TcPho91-green fluorescent protein have significantly higher levels of pyrophosphate (PPi ) and short-chain polyphosphate (polyP), suggesting accumulation of Pi in these cells. Moreover, when overexpressing parasites were maintained in a medium with low Pi , they grew at higher rates than control parasites. Only one allele of TcPho91 in the CL strain encodes for the complete open reading frame, while the other one is truncated encoding for only the N-terminal domain. Taking advantage of this characteristic, knockdown experiments were performed resulting in cells with reduced growth rate as well as a reduction in PPi and short-chain polyP levels. Our results indicate that TcPho91 is a phosphate sodium symporter involved in Pi homeostasis in T. cruzi. PMID:26031800

  4. Stabilization/solidification of mercury-contaminated waste ash using calcium sodium phosphate (CNP) and magnesium potassium phosphate (MKP) processes.

    PubMed

    Cho, Jae Han; Eom, Yujin; Lee, Tai Gyu

    2014-08-15

    This study examined the stabilization and solidification (S/S) of mercury (Hg)-contaminated waste ash generated from an industrial waste incinerator using chemically bonded phosphate ceramic (CBPC) technology. A magnesium potassium phosphate (MKP; MgKPO4 · 6H2O) ceramic, fabricated from MgO and KH2PO4, and a calcium sodium phosphate (CNP; CaNaPO4) ceramic, fabricated from CaO and Na2HPO4, were used as solidification binders in the CBPC process, and Na2S or FeS was added to each solidification binder to stabilize the Hg-contaminated waste ash. The S/S processes were conducted under various operating conditions (based on the solidification binder and stabilization reagent, stabilization reagent dosage, and waste loading ratio), and the performance characteristics of the S/S sample under each operating condition were compared, including the Hg leaching value and compressive strength. The Hg leaching value of untreated Hg-contaminated waste ash was 231.3 μg/L, whereas the S/S samples treated using the MKP and CNP processes exhibited Hg leaching values below the universal treatment standard (UTS) limit (25 μg/L). Although the compressive strengths of the S/S samples decreased as the sulfide dosage and waste loading ratio were increased, most of the S/S samples fabricated by the MKP and CNP processes exhibited good mechanical properties. PMID:24997263

  5. Kinetic Study of the Alkaline Degradation of Oseltamivir Phosphate and Valacyclovir Hydrochloride using Validated Stability Indicating HPLC.

    PubMed

    Al-Bagary, Ramzia I; El-Zaher, Asmaa A; Morsy, Fahima A; Fouad, Mai M

    2014-01-01

    Aqueous alkaline degradation was performed for oseltamivir phosphate (OP) and valacyclovir hydrochloride (VA). Isocratic stability indicating the use of high-performance liquid chromatography (HPLC) was presented for each drug in the presence of its degradation product. The separations were performed using the Nucleosil ODS column and a mobile phase consisting of phosphate buffer (pH = 7), acetonitrile, and methanol 50:25:25 (v/v/v) for OP. For VA separation, a Nucleosil CN column using phosphate buffer (pH = 7) and methanol 85:15 (v/v) was used as a mobile phase. Ultraviolet detection at 210 nm and 254 nm was used for OP and VA, respectively. The method showed high sensitivity concerning linearity, accuracy, and precision over the range 1-250 μg mL(-1) for both drugs. The proposed method was used to determine the drug in its pharmaceutical formulation and to investigate the degradation kinetics of each drug's alkaline-stressed samples. The reactions were found to follow a first-order reaction. The activation energy could also be estimated. International Conference on Harmonisation guidelines were adopted for method validation. PMID:24932100

  6. Control of placental alkaline phosphatase gene expression in HeLa cells: induction of synthesis by prednisolone and sodium butyrate

    SciTech Connect

    Chou, J.Y.; Takahashi, S.

    1987-06-16

    HeLa S/sub 3/ cells produce an alkaline phosphatase indistinguishable from the enzyme from human term placenta. The phosphatase activity in these cells was induced by both prednisolone and sodium butyrate. Both agents stimulated de novo synthesis of the enzyme. The increase in phosphatase activity paralleled the increase in immunoactivity and biosynthesis of placental alkaline phosphatase. The fully processed phosphatase monomer in control, prednisolone-treated or butyrate-treated cells was a 64.5 K polypeptide, measured by both incorporation of L-(/sup 35/S)methionine into enzyme protein and active-site labeling. The 64.5K polypeptide was formed by the incorporation of additional N-acetylneuraminic acid moieties to a precursor polypeptide of 61.5K. However, this biosynthetic pathway was identified only in butyrate-treated cells. In prednisolone-treated cells, the processing of 61.5K to 64.5K monomer was accelerated, and the presence of the 61.5 precursor could only be detected by either neuraminidase or monensin treatment. Phosphatase mRNA which comigrated with the term placental alkaline phosphatase mRNA of 2.7 kilobases was induced in the presence of either prednisolone or butyrate. Alkaline phosphatase mRNA is untreated HeLa S/sub 3/ cells migrated slightly faster than the term placental alkaline phosphatase mRNA. Butyrate also induced a second still faster migrating alkaline phosphatase mRNA. Both prednisolone and butyrate increased the steady-state levels of placental alkaline phosphatase mRNA. The data indicate that the increase in phosphatase mRNA by prednisolone and butyrate resulted in the induction of alkaline phosphatase activity and biosynthesis in HeLa S/sub 3/ cells. Furthermore, both agents induced the expression of different alkaline phosphatase gene transcripts without altering its protein product.

  7. Final report of the safety assessment of L-Ascorbic Acid, Calcium Ascorbate, Magnesium Ascorbate, Magnesium Ascorbyl Phosphate, Sodium Ascorbate, and Sodium Ascorbyl Phosphate as used in cosmetics.

    PubMed

    Elmore, Amy R

    2005-01-01

    L-Ascorbic Acid, Calcium Ascorbate, Magnesium Ascorbate, Magnesium Ascorbyl Phosphate, Sodium Ascorbate, and Sodium Ascorbyl Phosphate function in cosmetic formulations primarily as antioxidants. Ascorbic Acid is commonly called Vitamin C. Ascorbic Acid is used as an antioxidant and pH adjuster in a large variety of cosmetic formulations, over 3/4 of which were hair dyes and colors at concentrations between 0.3% and 0.6%. For other uses, the reported concentrations were either very low (<0.01%) or in the 5% to 10% range. Calcium Ascorbate and Magnesium Ascorbate are described as antioxidants and skin conditioning agents--miscellaneous for use in cosmetics, but are not currently used. Sodium Ascorbyl Phosphate functions as an antioxidant in cosmetic products and is used at concentrations ranging from 0.01% to 3%. Magnesium Ascorbyl Phosphate functions as an antioxidant in cosmetics and was reported being used at concentrations from 0.001% to 3%. Sodium Ascorbate also functions as an antioxidant in cosmetics at concentrations from 0.0003% to 0.3%. Related ingredients (Ascorbyl Palmitate, Ascorbyl Dipalmitate, Ascorbyl Stearate, Erythorbic Acid, and Sodium Erythorbate) have been previously reviewed by the Cosmetic Ingredient Review (CIR) Expert Panel and found "to be safe for use as cosmetic ingredients in the present practices of good use." Ascorbic Acid is a generally recognized as safe (GRAS) substance for use as a chemical preservative in foods and as a nutrient and/or dietary supplement. Calcium Ascorbate and Sodium Ascorbate are listed as GRAS substances for use as chemical preservatives. L-Ascorbic Acid is readily and reversibly oxidized to L-dehydroascorbic acid and both forms exist in equilibrium in the body. Permeation rates of Ascorbic Acid through whole and stripped mouse skin were 3.43 +/- 0.74 microg/cm(2)/h and 33.2 +/- 5.2 microg/cm(2)/h. Acute oral and parenteral studies in mice, rats, rabbits, guinea pigs, dogs, and cats demonstrated little toxicity

  8. ION RECOGNITION APPROACH TO VOLUME REDUCTION OF ALKALINE TANK WASTE BY SEPARATION AND RECYCLE OF SODIUM HYDROXIDE AND SODIUM NITRATE

    EPA Science Inventory

    A 3-year collaborative project between Oak Ridge National Laboratory (Bruce A. Moyer) and the University of North Texas (Prof. Alan P. Marchand) is proposed to explore new approaches to the separation of sodium hydroxide and other predominant sodium salts such as sodium nitrate f...

  9. Improvement of bioactivity, degradability, and cytocompatibility of biocement by addition of mesoporous magnesium silicate into sodium-magnesium phosphate cement.

    PubMed

    Wu, Yingyang; Tang, Xiaofeng; Chen, Jie; Tang, Tingting; Guo, Han; Tang, Songchao; Zhao, Liming; Ma, Xuhui; Hong, Hua; Wei, Jie

    2015-09-01

    A novel mesoporous magnesium-based cement (MBC) was fabricated by using the mixed powders of magnesium oxide, sodium dihydrogen phosphate, and mesoporous magnesium silicate (m-MS). The results indicate that the setting time and water absorption of the MBC increased as a function of increasing m-MS content, while compressive strength decreased. In addition, the degradability of the MBC in a solution of Tris-HCl and the ability of apatite formation on the MBC were significantly improved with the increase in m-MS content. In cell culture experiments, the results show that the attachment, proliferation, and alkaline phosphatase activity of the MC3T3-E1 cells on the MBC were significantly enhanced with the increase of the content of m-MS. It can be suggested that the MBC with good cytocompatibility could promote the proliferation and differentiation of the MC3T3-E1 cells. In short, our findings indicate that the MBC containing m-MS had promising potential as a new biocement for bone regeneration and repair applications. PMID:26395363

  10. Alkaline phosphatase activity in Zostera noltii hornem. and its contribution to the release of phosphate in the palmones river estuary

    NASA Astrophysics Data System (ADS)

    Hernández, I.; Pérez-Llorens, J. L.; Fernández, J. A.; Niell, F. X.

    Alkaline phosphatase activity (APA) was studied in Zostera noltii Hornem., a sea-grass collected in the Palmones river estuary (southern Spain). The higher activity was found in the leaves, with minor contributions in the stem and the underground parts of the plant. The enzymatic activity showed a two-phase kinetic versus substrate concentration between 5 μM and 25 mM. The influence of some environmental factors important in nature (temperature, pH, salinity, photon irradiance and external phosphate) on the enzymatic activity is discussed. Over an ecophysiological range of these factors, maximum APA was found at 30 0C (22·6 μmol pNP released g dry wt-1 h-1), pH 8·8 (35·6 μmol pNP g dry wt-1 h-1) and salinity 43·8 (27·8 pmol pNP g dry wt-1 h-1). With regard to light, APA and phosphate uptake in shoots were light-saturated and showed similar values for maximum velocity and half-saturation constant. In the range of phosphate concentration tested (0 20 μM), APA was independent of the external phosphate concentration. Finally, as Z. noltii incorporated only 16% of the phosphate hydrolysed from the model phosphomonoester used in the assay, the significance of Z. noltii population in the enzymatic release of phosphate to the estuary was estimated. A minimum of 8·4 nM Pi liberated per day and a maximum of 99·8 nM Pi day-1 was found.

  11. Alkaline Phosphatase Activity in Zostera noltii Hornem. and its Contribution to the Release of Phosphate in the Palmones River Estuary

    NASA Astrophysics Data System (ADS)

    Hernández, I.; Pérez-Llorens, J. L.; Fernández, J. A.; Niell, F. X.

    Alkaline phosphatase activity (APA) was studied in Zostera noltii Hornem., a sea-grass collected in the Palmones river estuary (southern Spain). The higher activity was found in the leaves, with minor contributions in the stem and the underground parts of the plant. The enzymatic activity showed a two-phase kinetic versus substrate concentration between 5 μM and 25 mM. The influence of some environmental factors important in nature (temperature, pH, salinity, photon irradiance and external phosphate) on the enzymatic activity is discussed. Over an ecophysiological range of these factors, maximum APA was found at 30 °C (22·6 μmol pNP released g dry wt -1 h -1), pH 8·8 (35·6 μmol pNP g dry wt -1 h -1) and salinity 43·8 (27·8 μmol pNP g dry wt -1 h -1). With regard to light, APA and phosphate uptake in shoots were light-saturated and showed similar values for maximum velocity and half-saturation constant. In the range of phosphate concentration tested (0-20 μM), APA was independent of the external phosphate concentration. Finally, as Z. noltii incorporated only 16% of the phosphate hydrolysed from the model phosphomonoester used in the assay, the significance of Z. noltii population in the enzymatic release of phosphate to the estuary was estimated. A minimum of 8·4 nM Pi liberated per day and a maximum of 99·8 nM Pi day -1 was found.

  12. Alkaline phosphatase activity in Zostera noltii hornem. and its contribution to the release of phosphate in the palmones river estuary

    NASA Astrophysics Data System (ADS)

    Hernández, I.; Pérez-Llorens, J. L.; Fernández, J. A.; Niell, F. X.

    Alkaline phosphatase activity (APA) was studied in Zostera noltii Hornem., a sea-grass collected in the Palmones river estuary (southern Spain). The higher activity was found in the leaves, with minor contributions in the stem and the underground parts of the plant. The enzymatic activity showed a two-phase kinetic versus substrate concentration between 5 μM and 25 mM. The influence of some environmental factors important in nature (temperature, pH, salinity, photon irradiance and external phosphate) on the enzymatic activity is discussed. Over an ecophysiological range of these factors, maximum APA was found at 30 0C (22·6 μmol pNP released g dry wt -1 h -1), pH 8·8 (35·6 μmol pNP g dry wt -1 h -1) and salinity 43·8 (27·8 pmol pNP g dry wt -1 h -1). With regard to light, APA and phosphate uptake in shoots were light-saturated and showed similar values for maximum velocity and half-saturation constant. In the range of phosphate concentration tested (0-20 μM), APA was independent of the external phosphate concentration. Finally, as Z. noltii incorporated only 16% of the phosphate hydrolysed from the model phosphomonoester used in the assay, the significance of Z. noltii population in the enzymatic release of phosphate to the estuary was estimated. A minimum of 8·4 nM Pi liberated per day and a maximum of 99·8 nM Pi day -1 was found.

  13. Collaborative study of the Food Chemicals Codex method for the determination of the neutralizing value of sodium aluminum phosphate.

    PubMed

    Park, D L

    1976-01-01

    Fifteen laboratories participated in a collaborative study to evaluate the Food Chemicals Codex method for the determination of the neutralizing value of sodium aluminum phosphate. The AOAC method for determining the neutralizing value of sodium acid pyrophosphate, sec. 8.010, was also included in the study. The precisions of the Food chemicals Codex method, based on the between-replicate standard deviation and on one collaborator making one determination, are 1.16 and 3.66, respectively. The Food Chemicals Codex method for the determination of the neutralizing value of sodium aluminum phosphate has been adopted as official first action. PMID:2581

  14. Sodium Phosphate

    MedlinePlus

    ... blockers (ARBs) such as candesartan (Atacand, in Atacand HCT), eprosartan (Teveten), irbesartan (Avapro, in Avalide), losartan (Cozaar, ... in Azor and Tribenzor), telmisartan (Micardis, in Micardis HCT and Twynsta), or valsartan (Diovan, in Diovan HCT, ...

  15. Sodium Phosphate

    MedlinePlus

    ... doctor if you have ever had a biopsy (removal of a piece of tissue for examination in ... room temperature and away from excess heat and moisture (not in the bathroom). Throw away any medication ...

  16. Adverse Renal and Metabolic Effects Associated with Oral Sodium Phosphate Bowel Preparation

    PubMed Central

    Heher, Eliot C.; Thier, Samuel O.; Rennke, Helmut; Humphreys, Benjamin D.

    2008-01-01

    Colorectal cancer can be prevented by the removal of adenomatous polyps during screening colonoscopy, but adequate bowel preparation is required. Oral sodium phosphate (OSP), an effective bowel purgative, is available over the counter and requires a substantially lower volume than polyethylene glycol-based preparative agents. Accumulating reports implicate OSP in electrolyte disturbances as well as acute kidney injury (AKI) in a syndrome termed phosphate nephropathy (a form of nephrocalcinosis). Despite published case reports and case series, the actual incidence, risk factors, and natural history of phosphate nephropathy remain largely undefined. Several recent observational studies have provided new information on these important issues while supporting a link between OSP and acute phosphate nephropathy as well as the development of chronic kidney disease in elderly patients, many of whom had a normal serum creatinine at the time of OSP ingestion. This review summarizes current knowledge about the renal complications of OSP, risk factors for its development, and the pathophysiology of acute and chronic kidney damage in nephrocalcinosis. PMID:18596115

  17. Phosphate Stress in Cultures and Field Populations of the Dinoflagellate Prorocentrum minimum Detected by a Single-Cell Alkaline Phosphatase Assay

    PubMed Central

    Dyhrman, Sonya T.; Palenik, Brian

    1999-01-01

    Alkaline phosphatase activity is a common marker of phosphate stress in many phytoplankton, but it has been difficult to attribute alkaline phosphatase activity to specific organisms or groups of phytoplankton in the field with traditional biochemical procedures. A new alkaline phosphatase substrate, ELF-97 (enzyme-labeled fluorescence), shows promise in this regard. When a phosphate group is cleaved from the ELF-97 reagent, the remaining molecule precipitates near the site of enzyme activity, thus fluorescently tagging cells with alkaline phosphatase activity. We characterized ELF-97 labeling in axenic cultures of a common dinoflagellate, Prorocentrum minimum, in order to understand ELF-97 labeling dynamics when phosphate nutrition varies. Enzyme activity, as detected by ELF-97 labeling, appears to be induced in late-log- or early-stationary-phase cultures if cells are grown in low-phosphate media and is lost when phosphate-stressed cells are refed with phosphate. ELF-97 appears to label an inducible intracellular alkaline phosphatase in P. minimum based on confocal microscopy studies. This may limit the use of this reagent to organisms that lack high levels of constitutive intracellular phosphatases. After laboratory cultures were characterized, ELF-97 was used to assay field populations of P. minimum in Narragansett Bay during two 1-week periods, and 12 to 100% of the P. minimum cells were labeled. The level of cell labeling was reduced by 3 days of incubation with added inorganic phosphate. Our results indicate that ELF-97 is an excellent new tool for monitoring phytoplankton phosphate stress in the environment when the data are supported by appropriate laboratory studies. PMID:10388722

  18. Synthesis, structural and electrochemical properties of sodium nickel phosphate for energy storage devices

    NASA Astrophysics Data System (ADS)

    Minakshi, Manickam; Mitchell, David; Jones, Rob; Alenazey, Feraih; Watcharatharapong, Teeraphat; Chakraborty, Sudip; Ahuja, Rajeev

    2016-05-01

    Electrochemical energy production and storage at large scale and low cost, is a critical bottleneck in renewable energy systems. Oxides and lithium transition metal phosphates have been researched for over two decades and many technologies based on them exist. Much less work has been done investigating the use of sodium phosphates for energy storage. In this work, the synthesis of sodium nickel phosphate at different temperatures is performed and its performance evaluated for supercapacitor applications. The electronic properties of polycrystalline NaNiPO4 polymorphs, triphylite and maricite, t- and m-NaNiPO4 are calculated by means of first-principle calculations based on spin-polarized Density Functional Theory (DFT). The structure and morphology of the polymorphs were characterized and validated experimentally and it is shown that the sodium nickel phosphate (NaNiPO4) exists in two different forms (triphylite and maricite), depending on the synthetic temperature (300-550 °C). The as-prepared and triphylite forms of NaNiPO4vs. activated carbon in 2 M NaOH exhibit the maximum specific capacitance of 125 F g-1 and 85 F g-1 respectively, at 1 A g-1 both having excellent cycling stability with retention of 99% capacity up to 2000 cycles. The maricite form showed 70 F g-1 with a significant drop in capacity after just 50 cycles. These results reveal that the synthesized triphylite showed a high performance energy density of 44 Wh kg-1 which is attributed to the hierarchical structure of the porous NaNiPO4 nanosheets. At a higher temperature (>400 °C) the maricite form of NaNiPO4 possesses a nanoplate-like (coarse and blocky) structure with a large skewing at the intermediate frequency that is not tolerant of cycling. Computed results for the sodium nickel phosphate polymorphs and the electrochemical experimental results are in good agreement.Electrochemical energy production and storage at large scale and low cost, is a critical bottleneck in renewable energy

  19. Thermal inactivation of Salmonella Enteritidis on chicken skin previously exposed to acidified Sodium chlorite or tri-sodium phosphate.

    PubMed

    Karuppasamy, K; Yadav, Ajit S; Saxena, Gaurav K

    2015-12-01

    Thermal inactivation of normal and starved cells of Salmonella Enteritidis on chicken skin previously exposed to different concentrations of acidified sodium chlorite (ASC) or tri-sodium phosphate (TSP) was investigated. Inoculated skin was pretreated with different concentration of ASC or TSP, packaged in bags, and then immersed in a circulating water bath at 60 to 68 °C. The recovery medium was Hektoen enteric agar. D-values, determined by linear regression, for normal cells on chicken skin, were 2.79, 1.17 and 0.53 min whereas D-values for starved cells were 4.15, 1.83 and 0.66 at 60, 64 and 68 °C, respectively. z-values for normal cells were 3.54 and for starved cells were 2.29. Pretreatment of Salmonella Enteritidis cells with 0 to 200 ppm of ASC or 0 to 1.0 % TSP resulted in lower D-values at all temperatures. Sensory results indicated no significance differences for control and treatments. Thus, results of this study indicated that pretreatment of chicken skin with ASC or TSP increased sensitivity of Salmonella Enteritidis to heat without affecting organoleptic quality of chicken meat. PMID:26604399

  20. Optical and FTIR structural studies of CoO-doped sodium borate, sodium silicate and sodium phosphate glasses and effects of gamma irradiation-a comparative study

    NASA Astrophysics Data System (ADS)

    Abdelghany, A. M.; ElBatal, F. H.; ElBatal, H. A.; EzzElDin, F. M.

    2014-09-01

    Undoped and CoO-doped three binary glass systems, namely sodium borate, sodium silicate and sodium phosphate glasses were prepared by the melt annealing technique. Combined optical and FTIR spectral studies were carried out for the prepared samples before and after being subjected to a gamma dose of 8 Mrad (8 × 104 Gy). Optical spectra of the undoped samples before irradiation reveal strong UV absorption varying in depth with the type of glass and such strong UV spectra are related to the presence of unavoidable trace iron impurities within the raw materials used for the preparation of these three basic glasses. CoO-doped (0.25%) glasses show additional visible absorption spectra which are related to the existence of cobalt in the divalent state (Co)2+ ions which are present in two coordination states, namely the octahedral and tetrahedral forms. The broad visible band of Co2+ ions shows in some instances obvious splitting to three component peaks. Gamma irradiation on undoped glasses causes obvious induced UV-visible bands and their extension depends on the type of glass system. Irradiation of CoO-doped glasses causes an obvious increase of absorption within the visible region. Infrared absorption spectra of the undoped three basic glasses reveal IR vibrational bands which are characteristics to the three specific characteristic structural building units within the borate, silicate and phosphate glasses. The introduction of CoO with the doping level causes minor variations of the IR spectra because of the low doping content together with the presence of cobalt ions in structural modifying sites. Gamma irradiation is observed to cause limited changes within the intensities of some bands in the IR spectra which are attributed to changes in bond lengths and/or bond angles of the structural building units by the irradiation process.

  1. Effect of intravenous calcium and oral sodium phosphate in cows with parturient paresis.

    PubMed

    Braun, U; Dumelin, J; Siegwart, N; Bleul, U; Hässig, M

    2007-06-01

    The goal of this study was to determine whether oral administration of sodium phosphate in conjunction with intravenous calcium is more efficaceous than intravenous calcium alone for the treatment of parturient paresis. Thirty cows with parturient paresis were examined and treated by the same veterinarian. The cows were divided randomly into two groups of 15 cows each. Cows in group A received 500 ml of a 40 per cent calcium borogluconate solution containing 15.65 g calcium gluconate and borogluconate, with a supplement of 6 per cent magnesium hypophosphite (9.85 g magnesium hypophosphite) intravenously over a period of approximately 15 min. Cows in group B received the same treatment as well as 350 g of monobasic sodium phosphate (70 g inorganic phosphate, NaH2PO4 2 H2O, Streuli) dissolved in 0.5 litres of distilled water orally via a stomach tube. After treatment, the heart rate, respiratory rate, rectal temperature, superficial body temperature, rumen motility, appetite and defecation of the cows were monitored every hour for eight h. The cows' attempts to rise and their ability to stand were also noted. Initially, the results of clinical examination and serum electrolyte analyses did not differ between the two groups of cows. Within one hour of treatment, stupor was not observed in any of the cows. The general demeanour after treatment did not differ significantly between the two groups. In both groups, the average rectal temperature increased within two hours of the initiation of treatment, from 38.0 +/- 0.95 degrees C to 38.5 +/- 0.40 degrees C. There was no significant difference in the recovery rate between the groups. Of the 30 cows, 22 (73.3 per cent) stood within eight hours of treatment (10 cows from group A and 12 cows from group B). The type of treatment did not affect the time required to stand: cows in group A stood within 47.3 +/- 44 minutes and cows in group B stood within 24.2 +/- 32 minutes after the start of treatment. Our findings do not

  2. [Efficacy of oral calcium and/or sodium phosphate in the prevention of parturient paresis in cows].

    PubMed

    Braun, U; Bryce, B; Liesegang, A; Hässig, M; Bleul, U

    2008-07-01

    The goal of this study was to investigate the efficacy of calcium chloride, sodium phosphate or a combination of these two substances administered orally immediately postpartum for the prevention of parturient paresis in cows. Thirty-two cows that had had parturient paresis at the previous calving, and in which serum biochemistry had shown hypocalcaemia and hypophosphataemia, were used in the study. The cows were transferred to the Department of Farm Animals, University of Zurich, five days before their expected due dates. On a randomized trial, the cows were given calcium chloride, sodium phosphate, both substances or no treatment (controls) via a stomach tube immediately postpartum and 12 hours later. The cows were monitored for 96 hours during which time blood was collected on a regular basis for the determination of total calcium, ionized calcium, inorganic phosphorus and magnesium concentrations. Of the 32 cows treated, 19 (59%) had parturient paresis and 13 (41%) did not. The incidence of parturient paresis did not differ significantly among the groups although there was a tendency for a lower incidence in cows treated with both calcium chloride and sodium phosphate. The various treatments had no apparent effect on serum calcium concentration. The concentration of inorganic phosphorus increased significantly in cows treated with sodium phosphate compared with the controls. The results of this study showed that cows treated with both calcium chloride and sodium phosphate orally tended to have a lower incidence of parturient paresis. Further investigation into multiple administrations of oral calcium chloride and sodium phosphate, started before parturition, for the prevention of parturient paresis is required. PMID:18714936

  3. Effectiveness of recovered magnesium phosphates as fertilizers in neutral and slightly alkaline soils

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Magnesium phosphates such as struvite (MgNH4PO4x6H2O) can be recovered from municipal, industrial and agricultural wastewaters. However, minimal research has been conducted on the beneficial reuse of these recovered products; conducted research has focused on low pH soils. This study determined wh...

  4. Spectrophotometric and chemometric methods for determination of imipenem, ciprofloxacin hydrochloride, dexamethasone sodium phosphate, paracetamol and cilastatin sodium in human urine

    NASA Astrophysics Data System (ADS)

    El-Kosasy, A. M.; Abdel-Aziz, Omar; Magdy, N.; El Zahar, N. M.

    2016-03-01

    New accurate, sensitive and selective spectrophotometric and chemometric methods were developed and subsequently validated for determination of Imipenem (IMP), ciprofloxacin hydrochloride (CIPRO), dexamethasone sodium phosphate (DEX), paracetamol (PAR) and cilastatin sodium (CIL) in human urine. These methods include a new derivative ratio method, namely extended derivative ratio (EDR), principal component regression (PCR) and partial least-squares (PLS) methods. A novel EDR method was developed for the determination of these drugs, where each component in the mixture was determined by using a mixture of the other four components as divisor. Peak amplitudes were recorded at 293.0 nm, 284.0 nm, 276.0 nm, 257.0 nm and 221.0 nm within linear concentration ranges 3.00-45.00, 1.00-15.00, 4.00-40.00, 1.50-25.00 and 4.00-50.00 μg mL- 1 for IMP, CIPRO, DEX, PAR and CIL, respectively. PCR and PLS-2 models were established for simultaneous determination of the studied drugs in the range of 3.00-15.00, 1.00-13.00, 4.00-12.00, 1.50-9.50, and 4.00-12.00 μg mL- 1 for IMP, CIPRO, DEX, PAR and CIL, respectively, by using eighteen mixtures as calibration set and seven mixtures as validation set. The suggested methods were validated according to the International Conference of Harmonization (ICH) guidelines and the results revealed that they were accurate, precise and reproducible. The obtained results were statistically compared with those of the published methods and there was no significant difference.

  5. Spectrophotometric and chemometric methods for determination of imipenem, ciprofloxacin hydrochloride, dexamethasone sodium phosphate, paracetamol and cilastatin sodium in human urine.

    PubMed

    El-Kosasy, A M; Abdel-Aziz, Omar; Magdy, N; El Zahar, N M

    2016-03-15

    New accurate, sensitive and selective spectrophotometric and chemometric methods were developed and subsequently validated for determination of Imipenem (IMP), ciprofloxacin hydrochloride (CIPRO), dexamethasone sodium phosphate (DEX), paracetamol (PAR) and cilastatin sodium (CIL) in human urine. These methods include a new derivative ratio method, namely extended derivative ratio (EDR), principal component regression (PCR) and partial least-squares (PLS) methods. A novel EDR method was developed for the determination of these drugs, where each component in the mixture was determined by using a mixture of the other four components as divisor. Peak amplitudes were recorded at 293.0 nm, 284.0 nm, 276.0 nm, 257.0 nm and 221.0 nm within linear concentration ranges 3.00-45.00, 1.00-15.00, 4.00-40.00, 1.50-25.00 and 4.00-50.00 μg mL(-1) for IMP, CIPRO, DEX, PAR and CIL, respectively. PCR and PLS-2 models were established for simultaneous determination of the studied drugs in the range of 3.00-15.00, 1.00-13.00, 4.00-12.00, 1.50-9.50, and 4.00-12.00 μg mL(-1) for IMP, CIPRO, DEX, PAR and CIL, respectively, by using eighteen mixtures as calibration set and seven mixtures as validation set. The suggested methods were validated according to the International Conference of Harmonization (ICH) guidelines and the results revealed that they were accurate, precise and reproducible. The obtained results were statistically compared with those of the published methods and there was no significant difference. PMID:26709018

  6. Alkaline Phosphatase Activity : an overlooked player on the phosphate behavior in macrotidal estuaries

    NASA Astrophysics Data System (ADS)

    Delmas, Daniel; Labry, Claire; Youenou, Agnes; Quere, Julien; Auguet, Jean Christophe; Montanie, Helene

    2014-05-01

    The non-conservative behavior of phosphate within the estuarine salinity gradient is essentially assigned to physico-chemical processes, such as desorption at low salinity and to benthic exchanges. Microbial phosphatase activity (APA), generally related to phosphate deficiency, is seldom studied in phosphate rich estuarine waters. In order to address the impact of microbial activity (bacterial abundance, production BSP, APA) on phosphate behavior, we studied these activities on a seasonal basis within the salinity gradient of two macrotidal estuaries presenting different levels of suspended solids. Whatever the season the Charente estuary is characterized by high levels of Suspended Particulate Matter (SPM > 1g.L-1), particularly in the Maximum Turbidity Zone (MTZ) located at the 5-10 psu. In this area characterized by high BSP and APA there is a significant increase of PO4 levels especially during summer. In the Aulne estuary the particle load is significantly lower (1/10) but high BSP and APA are equally recorded. In the highly turbid waters of the Charente estuary, active phytoplankton is virtually absent as pheopigments constitute up to 80% of the total pigments, particularly in the MTZ, therefore APA may essentially have a bacterial origin. In the Aulne estuary attached bacteria are dominant, both in numbers and production, and their distribution along the haline gradient perfectly follows those of APA and phosphate levels. These observations, associated with the very close relationships observed between APA, SPM and BSP, suggest that APA derive mainly from bacterial (attached) origin and operate at the expense of particulate phosphorus and hence contribute to PO4 regeneration, especially in spring and summer. Finally, as APA increased as PO4, whereas the reverse is observed in both fresh and marine waters, an original scheme for APA regulation, related to the large dominance of attached bacteria can be described for the estuarine waters.

  7. Enhanced osteogenic activity of a poly(butylene succinate)/calcium phosphate composite by simple alkaline hydrolysis.

    PubMed

    Arphavasin, Suphakit; Singhatanadgit, Weerachai; Ngamviriyavong, Patcharee; Janvikul, Wanida; Meesap, Preeyapan; Patntirapong, Somying

    2013-10-01

    Bone engineering offers the prospect of alternative therapies for clinically relevant skeletal defects. Poly(butylene succinate) (PBSu) is a biodegradable and biocompatible polyester which may possess some limitations in clinical use due to its hydrophobicity. In order to overcome these limitations and increase the bioactivity, a simple and convenient surface hydrolysis of PBSu, PBSu/hydroxyapatite and PBSu/β-tricalcium phosphate (TCP) films was performed. The resulting surfaces (i.e., HPBSu, HPBSu/HA and HPBSu/TCP) were tested for their physicochemical property, biocompatibility and osteogenic potency. The results showed that surface hydrolysis significantly increased surface roughness and hydrophilicity of the composites, with the HPBSu/TCP possessing the most pronounced results. All the materials appeared to be biocompatible and supported in vitro growth and osteoblast differentiation of hMSCs, and the alkaline hydrolysis significantly enhanced the hMSC cell proliferation and the osteogenic potency of PBSu/TCP compared with the non-hydrolyzed sample. In conclusion, the HPBSu/TCP possessed better hydrophilicity, biocompatibility and osteogenic potency in vitro, suggesting that this simple and convenient alkaline hydrolysis could be used to augment the biological property of PBSu-based composites for bone engineering in vivo. PMID:24057872

  8. Phosphate salts

    MedlinePlus

    ... taken by mouth or used as enemas. Indigestion. Aluminum phosphate and calcium phosphate are FDA-permitted ingredients ... Phosphate salts containing sodium, potassium, aluminum, or calcium are LIKELY SAFE for most people when taken by mouth short-term, when sodium phosphate is inserted into the ...

  9. Protein extraction using the sodium bis(2-ethylhexyl) phosphate (NaDEHP) reverse micellar system.

    PubMed

    Hu, Z; Gulari, E

    1996-04-20

    The reverse micellar system of sodium bis(2-ethylhexyl) phosphate (NaDEHP)/isooctane/brine was used for liquid-liquid extraction of proteins. We investigated the solubilization of cytochrome-c and alpha-chymotrypsin into the NaDEHP reverse micellar phase by varying the pH and NaCl concentration in the aqueous phase. At neutral pH and relatively low ionic strength, the proteins are extracted into the micellar phase with high yield. By contacting the micellar phase with a divalent cation (e.g., Ca(2+)) aqueous solution, the reverse micelles are destabilized and release the protein molecules back into an aqueous solution for recovery. This method separates the proteins from the surfactant with very high overall efficiencies. PMID:18626936

  10. Screening Evaluation of Sodium Nonatitanate for Strontium and Actinide Removal from Alkaline Salt Solution

    SciTech Connect

    Hobbs, D.T.

    2001-02-13

    This report describes results from screening tests evaluating strontium and actinide removal characteristics of a sodium titanate material developed by Clearfield and coworkers at Texas A and M University and offered commercially by Honeywell. Sodium nonatitanate may exhibit improved actinide removal kinetics and filtration characteristics compared to MST and thus merit testing.

  11. Preparation of photocatalytic ZnO nanoparticles and application in photochemical degradation of betamethasone sodium phosphate using taguchi approach

    NASA Astrophysics Data System (ADS)

    Giahi, M.; Farajpour, G.; Taghavi, H.; Shokri, S.

    2014-07-01

    In this study, ZnO nanoparticles were prepared by a sol-gel method for the first time. Taguchi method was used to identify the several factors that may affect degradation percentage of betamethasone sodium phosphate in wastewater in UV/K2S2O8/nano-ZnO system. Our experimental design consisted of testing five factors, i.e., dosage of K2S2O8, concentration of betamethasone sodium phosphate, amount of ZnO, irradiation time and initial pH. With four levels of each factor tested. It was found that, optimum parameters are irradiation time, 180 min; pH 9.0; betamethasone sodium phosphate, 30 mg/L; amount of ZnO, 13 mg; K2S2O8, 1 mM. The percentage contribution of each factor was determined by the analysis of variance (ANOVA). The results showed that irradiation time; pH; amount of ZnO; drug concentration and dosage of K2S2O8 contributed by 46.73, 28.56, 11.56, 6.70, and 6.44%, respectively. Finally, the kinetics process was studied and the photodegradation rate of betamethasone sodium phosphate was found to obey pseudo-first-order kinetics equation represented by the Langmuir-Hinshelwood model.

  12. Isolation and characterization of a sodium-dependent phosphate transporter gene in Dunaliella viridis.

    PubMed

    Li, Qiyun; Gao, Xiaoshu; Sun, Yu; Zhang, Qingqi; Song, Rentao; Xu, Zhengkai

    2006-02-01

    A sodium-dependent phosphate transporter gene, DvSPT1, was isolated from a cDNA library using a probe derived from a subtracted cDNA library of Dunaliella viridis. Sequencing analyses revealed a cDNA sequence of 2649 bp long and encoded an open-reading frame consisting of 672 amino acids. The deduced amino acid sequence of DvSPT1 exhibited 31.2% identity to that of TcPHO from Tetraselmis chui. Hydrophobicity and secondary structure prediction revealed 11 conserved transmembrane domains similar to those found in PHO89 from Saccharomyces cerevisiae and PHO4 from Neurospora crassa. Northern blot analysis indicated that the DvSPT1 expression was induced upon NaCl hyperosmotic stress or phosphate depletion. Functional characterization in yeast Na+ export pump mutant G19 suggested that DvSPT1 encoded a Na+ transporter protein. The gene sequence of GDvSPT1 (7922 bp) was isolated from a genomic library of D. viridis. Southern blot analysis indicated that there exist at least two homologous genes in D. viridis. PMID:16359638

  13. Inorganic polymers from laterite using activation with phosphoric acid and alkaline sodium silicate solution: Mechanical and microstructural properties

    SciTech Connect

    Lassinantti Gualtieri, Magdalena

    2015-01-15

    Geopolymers from laterite, an iron-rich soil available in developing countries, have great potential as building materials. In this work, laterite from Togo (Africa) was used to prepare geopolymers using both phosphoric acid and alkaline sodium silicate solution. Microstructural properties were investigated by scanning electron microscopy, X-ray powder diffraction and mercury porosimetry, whereas thermal properties were evaluated by thermal analyses. The local environment of iron was studied by X-ray Absorption Spectroscopy (XANES region). The mechanical properties were determined. Modulus of Rupture and Young's modulus fell in the ranges 3.3–4.5 MPa and 12–33 GPa, respectively, rendering the materials good candidates for construction purposes. Heating above 900 °C results in weight-gain, presumably due to iron redox reactions. X-ray Absorption Spectroscopy data evidence changes in the chemical and structural environments of iron following thermal treatment of geopolymers. These changes indicate interaction between the geopolymer structure and iron during heating, possibly leading to redox properties. -- Highlights: •Geopolymerization of laterite is promising for fabrication of building materials. •Both phosphoric acid and alkaline sodium silicate solution can be used for activation. •Thermally activated redox properties of the inorganic polymers were observed.

  14. Giant rodlike reversed micelles formed by sodium bis(2-ethylhexyl) phosphate in n-heptane

    SciTech Connect

    Yu, Z.J.; Neuman, R.D. )

    1994-08-01

    The solution behaviors of sodium bis(2-ethylhexyl) phosphate (NaDEHP) in n-heptane were investigated by light-scattering and viscosity measurements. NaDEHP forms giant rodlike reversed micelles, with a radius of gyration as large as 53 nm, which violently contrasts with the literature view that the average micellar aggregation numbers in nonaqueous or apolar media are much smaller (seldom exceeding 20) than those in aqueous media. Significantly, a small amount of water plays the role of an antimicellar growth agent; i.e., the reversed micellar size decreases remarkably when [open quotes]dry[close quotes] solutions are exposed to humid air from which water vapor is absorbed or when bulk water is directly added - a behavior which is distinctly opposite to that for sodium bis(2-ethylhexyl) sulfosuccinate/apolar medium systems. Thus, the literature views that large micelles can only be found in aqueous media and that the surfactant headgroups in reversed micelles are linked together by hydrogen bonds are misleading. It is suggested that the primary contribution to the driving force for the growth of rodlike NaDEHP reversed micelles is long-range electrostatic interactions among the headgroups of the surfactant molecules and their counterions, and a possible mechanism for the effect of water is also discussed. 27 refs., 7 figs., 1 tab.

  15. Glucosamine: fructose-6-phosphate amidotransferase in the white shrimp Litopenaeus vannamei: characterization and regulation under alkaline and cadmium stress.

    PubMed

    Liu, Y; Cai, D X; Wang, L; Li, J Z; Wang, W N

    2015-10-01

    Heavy metal residues and chemical contaminators considered as relevant sources of aquatic environmental pollutants have a generally immunosuppressive effect on aquatic organisms, depressing metabolic activities and immune response. Glutamine: fructose-6-phosphate aminotransferase (GFAT, EC2.6.1.16) is the first, and rate-limiting, enzyme in the hexosamine biosynthetic pathway, and is involved in the regulation of chitin biosynthesis and glycosylation of proteins. We have isolated and characterized GFAT from the white shrimp Litopenaeus vannamei. Amino acid sequence similarity of the Lv-GFAT (L.vannamei-GFAT) was highest to GFATs isolated from insects and mammals (83 % similarity to that of Haemaphysalis longicornis). The open-reading frame of the Lv-GFAT codes for a protein of 41.6 kDa with a calculated isoelectric point of 5.03. RT-PCR assays showed that endogenous Lv-GFAT mRNA is most strongly expressed in the intestine. Further analysis of Lv-GFAT gene expression in hepatopancreas by quantitative real-time PCR demonstrated that Lv-GFAT transcript levels increased when the shrimp were exposed to alkaline pH (9.3) and cadmium stress, but the time when its mRNA expression level peaked differed under these stresses. We also first expressed the recombinant protein of GFAT from shrimps in Escherichia coli. Western blot analyses confirmed that the Lv-GFAT protein was strongly expressed in the hepatopancreas after exposure to the LC-Cd stress. These results suggest that Lv-GFAT expression is stimulated by alkaline pH and cadmium stress and that it may play important roles in resistance of shrimp to environmental stresses. PMID:25956985

  16. Structural investigation of Eu{sup 2+} emissions from alkaline earth zirconium phosphate

    SciTech Connect

    Hirayama, Masaaki; Sonoyama, Noriyuki; Yamada, Atsuo; Kanno, Ryoji

    2009-04-15

    Eu{sup 2+} doped A{sub 0.5}Zr{sub 2}(PO{sub 4}){sub 3} (A=Ca, Sr, Ba) phosphors with the NASICON structure were synthesized by a co-precipitation method. Their photoluminescent and structural properties were investigated by photoluminescent spectroscopy and powder X-ray Rietveld analysis, which determined two sites for Eu{sup 2+} ions in the host structure, 3a and 3b. The Eu-O bond lengths were increased by changing alkaline earth ions from Ca to Ba, causing Eu{sup 2+} emission bands to shift from blue-green to blue. A correlation was observed between the peak wavelength positions and the Eu-O bond length. The photoluminescent properties are discussed in terms of crystal field strength and nephelauxetic effect, and a schematic diagram of Eu{sup 2+} emissions is proposed for the Eu{sup 2+} doped NASICON phosphor. - Graphical abstract: Eu{sup 2+} doped NASICON structured A{sub 0.5}Zr{sub 2}(PO{sub 4}){sub 3} (A=Ca, Sr, Ba) showed the blue and blue-green colored emissions attributed to 4f{sup 6}5d{sup 1}-4f{sup 7} transitions. The photoluminescent properties are discussed in terms of crystal field strength and nephelauxetic effect using powder X-ray Rietveld analysis.

  17. Theoretical Studies of the Spin Hamiltonian Parameters and Local Distortions for Cu2+ in Alkaline Earth Lead Zinc Phosphate Glasses

    NASA Astrophysics Data System (ADS)

    Wang, Bo-Kun; Wu, Shao-Yi; Yuan, Zi-Yi; Liu, Zi-Xuan; Jiang, Shi-Xin; Liu, Zheng; Yao, Zi-Jian; Teng, Bao-Hua; Wu, Ming-He

    2016-08-01

    The spin Hamiltonian parameters and local structures are theoretically studied for Cu2+-doped alkaline earth lead zinc phosphate (RPPZ, R=Mg, Ca, Sr, and Ba) glasses based on the high-order perturbation calculations for a tetragonally elongated octahedral 3d9 cluster. The relative elongation ratios are found to be ρ≈3.2%, 4.4%, 4.6%, and 3.3% for R=Mg, Ca, Sr, and Ba, respectively, because of the Jahn-Teller effect. The whole decreasing crystal-field strength Dq and orbital reduction factor k from Mg to Sr are ascribed to the weakening electrostatic coulombic interactions and the increasing probability of productivity of nonbridge oxygen (and hence increasing Cu2+-O2- electron cloud admixtures) under PbO addition, respectively, with increasing alkali earth ionic radius. The anomalies (the largest Dq and the next highest k among the systems) for R=Ba are attributed to the cross linkage of this large cation in the network. The overall increasing order (Mg≤Ba

  18. Sodium bicarbonate protects uranium-induced acute nephrotoxicity through uranium-decorporation by urinary alkalinization in rats

    PubMed Central

    Ohmachi, Yasushi; Imamura, Tomomi; Ikeda, Mizuyo; Shishikura, Eriko; Kim, Eunjoo; Kurihara, Osamu; Sakai, Kazuo

    2015-01-01

    To evaluate the effectiveness of sodium bicarbonate (SB) in removing uranium and protecting animals from uranium toxicity, we intramuscularly administered 1 mg/kg of uranyl nitrate to 8-wk-old male SD rats, and 20 min after administration of uranyl nitrate, the animals were given a single oral administration of SB at 0.1, 0.3 or 1 g/kg. The SB treatment at a dose of 0.3 g/kg or more raised the pH of the rats’ urine until 4 h after treatment, and it significantly reduced the uranium amounts in the kidneys at 1 day after treatment. In another experiment, rats were intramuscularly administered 1 mg/kg of uranyl nitrate, and 20 min later, the animals were treated with sodium bicarbonate (0.1 or 1 g/kg). The rats were autopsied at 1, 3 and 7 days after uranium treatment. High-dose SB resulted in a significant increase in urinary uranium excretion in the first 24 h and a reduction of uranium deposition in the kidneys and femurs, and it also significantly suppressed uranium-induced renal toxicity, as shown by both histopathology and clinical chemistry at 3 days after uranium treatment. Low-dose SB did not show such marked effects. Our findings demonstrated that the uranium decorporation effect of sodium bicarbonate was observed at the dosage showing urine alkalinization in rats and that decorporation effect of sodium bicarbonate might be beneficial if it is administered immediately after incorporation of soluble uranium. PMID:26028815

  19. Biomembranes from slaughterhouse blood erythrocytes as prolonged release systems for dexamethasone sodium phosphate.

    PubMed

    Drvenica, Ivana T; Bukara, Katarina M; Ilić, Vesna Lj; Mišić, Danijela M; Vasić, Borislav Z; Gajić, Radoš B; Đorđević, Verica B; Veljović, Đorđe N; Belić, Aleksandar; Bugarski, Branko M

    2016-07-01

    The present study investigated preparation of bovine and porcine erythrocyte membranes from slaughterhouse blood as bio-derived materials for delivery of dexamethasone-sodium phosphate (DexP). The obtained biomembranes, i.e., ghosts were characterized in vitro in terms of morphological properties, loading parameters, and release behavior. For the last two, an UHPLC/-HESI-MS/MS based analytical procedure for absolute drug identification and quantification was developed. The results revealed that loading of DexP into both type of ghosts was directly proportional to the increase of drug concentration in the incubation medium, while incubation at 37°C had statistically significant effect on loaded amount of DexP (P < 0.05). The encapsulation efficiency was about fivefold higher in porcine compared to bovine ghosts. Insight into ghosts' surface morphology by field emission-scanning electron microscopy and atomic force microscopy confirmed that besides inevitable effects of osmosis, DexP inclusion itself had no observable additional effect on the morphology of the ghosts carriers. DexP release profiles were dependent on erythrocyte ghost type and amount of residual hemoglobin. However, sustained DexP release was achieved and shown over 3 days from porcine ghosts and 5 days from bovine erythrocyte ghosts. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:1046-1055, 2016. PMID:27254304

  20. Comparison of clinical efficacies of sodium ascorbyl phosphate, retinol and their combination in acne treatment.

    PubMed

    Ruamrak, C; Lourith, N; Natakankitkul, S

    2009-02-01

    Acne vulgaris impairs the appearance of an individual and causes psychological irritation. Inflammatory acne lesion is caused by multifactor incorporates in each step of acne pathogenesis. In an attempt to archive inflammatory lesion treatment with the promise of prevention of acne vulgaris, randomized and double-blind studies on the comparison of the efficacies of topical formulations containing 5% sodium ascorbyl phosphate (SAP) and 0.2% retinol, separately as well as in combination application, were conducted. The resulting data showed that SAP reduced the inflammatory lesion by 20.14% and 48.82% within 4 and 8 weeks respectively. Application of the formulation containing retinol slightly improved the treatment efficacy as the lesion reduced by 21.79% and 49.50% after 4 and 8 weeks respectively. The combination treatment significantly reduced the inflammatory lesion by 29.28% after 4 weeks and 63.10% after 8 weeks of application. The most effective treatment was by using the combination of 5% SAP and 0.2% retinol, which incorporated the synergistic effects on lipid peroxidation and sebaceous gland function in addition to the enhancement of SAP permeability by the desquamation of stratum corneum influenced by retinol, keratin plug removal and anti-inflammatory effect of retinol. This study promises for the development of cosmetic products to overcome aesthetic and psychological problems caused by acne vulgaris. PMID:19134126

  1. Iontophoresis successfully delivers dexamethasone sodium phosphate to dermis as measured by microdialysis.

    PubMed

    Joshi, Abhay; Stagni, Grazia; Cleary, Ann; Patel, Komal; Weiss, David S; Hagins, Marshall

    2014-01-01

    Despite its widespread and long term use, the effectiveness of iontophoresis to increase the delivery of dexamethasone sodium phosphate (DSP) remains controversial. The goal of this study was to quantitatively compare the DSP concentrations in dermis' dialysates in two delivery scenarios: with and without iontophoresis. Interstitial fluid concentrations were measured by cutaneous microdialysis. Passive and active iontophoresis were applied simultaneously on the skin of the forearm in eight healthy adult participants using each participant as his/her own control. The iontophoresis apparatus and procedures were identical to those used in common clinical practice. Iontophoresis electrodes were loaded with 2 mL of 4.4 mg/mL of preservative-free DSP solution. Electric current (4 mA) was applied for 20 min. Dialysate samples were collected for 2 h and analyzed for DSP and its active metabolite dexamethasone (DXM). Seven out of eight iontophoresis sites contained quantifiable levels of DSP and DXM, whereas none of the samples collected at the passive site contained either form of the drug. In conclusion, this study demonstrates that iontophoresis significantly (p < 0.0001) increases delivery of DSP to the dermis compared with passive delivery of the same, and that microdialysis can be used to monitor DSP delivery and DXM formation in skin. PMID:24338751

  2. Novel nanostructures and optical properties of silver doped sodium phosphate thin films.

    PubMed

    Singh, Punita; Deepa, M; Srivastava, A K; Sood, K N; Kar, M

    2009-11-01

    (50-x)Na2O-50P2O5-xAgCl (x = 0 to 15 mol%) glasses in bulk form were synthesized using melt-quenching technique. Thin films of these silver doped sodium phosphate glasses were deposited by thermal evaporation process. The influence of deposition of these glasses in thin film form and subsequent annealing at 600 degrees C on the structure and optical properties such as transmittance, reflectance, refractive index and band gap have been investigated in detail. X-ray diffraction studies of the as-deposited films show the films to be amorphous whereas annealed films show existence of orthorhombic and monoclinic phase of NaPO3 along with crystalline cubic phase of AgCl in doped glasses. Structural investigations of these annealed films show unique morphologies (needle-like and granular) at nano-scale. Both as-fabricated and annealed films are poor reflectors but show high transmittance in the entire spectral region under consideration, which is a direct consequence of particle size effects. Indirect band gap narrowing and variation in refractive index upon annealing is consistent with nanostructural transformations in these samples. PMID:19908577

  3. Prospective evaluation of small bowel preparation with bisacodyl and sodium phosphate for capsule endoscopy

    PubMed Central

    Franke, Andreas; Hummel, Frank; Knebel, Phillip; Antoni, Christoph; Böcker, Ulrich; Singer, Manfred V; Löhr, Matthias

    2008-01-01

    AIM: To determine the effect of Prepacol®, a combination of sodium phosphate and bisacodyl, on transit and quality of capsule endoscopy (CE). METHODS: Fivety two consecutive patients were included in this prospective study. CE was performed following a 12 h fasting period. Twenty six patients were randomized for additional preparation with Prepacol®. The quality of CE was assessed separately for the proximal and the distal small bowel by 3 experienced endoscopists on the basis of a graduation which was initially developed with 20 previous CE. RESULTS: Preparation with Prepacol® accelerated small bowel transit time (262 ± 55 min vs 287 ± 97 min), but had no effect on the quality of CE. Visibility was significantly reduced in the distal compared to the proximal small bowel. CONCLUSION: The significantly reduced visibility of CE in the distal small bowel allocates the need for a good preparation. Since Prepacol® has no beneficial effect on CE the modality of preparation and the ideal time of application remains unclear. Further standardized examinations are necessary to identify sufficient preparation procedures and to determine the impact of the volume of the preparation solution. PMID:18395907

  4. Determination of induction period and crystal growth mechanism of dexamethasone sodium phosphate in methanol-acetone system

    NASA Astrophysics Data System (ADS)

    Hao, Hongxun; Wang, Jingkang; Wang, Yongli

    2005-02-01

    The induction period of dexamethasone sodium phosphate at different supersaturation was experimentally determined in a methanol-acetone system. The laser monitoring observation technique was used to determine the appearance of the first nucleus in solution. The effect of solution composition on induction period was discussed. Based on classical homogeneous nucleation theory, the solid-liquid interfacial tension and surface entropy factor were calculated from the induction period data. The experimentally determined values of interfacial tension are in agreement with the theoretical values predicted by the Mersmann equation. It was found that the nucleus of dexamethasone sodium phosphate grows continuously in pure methanol and turns from continuous growth to birth and spread growth with increasing acetone content in a methanol-acetone mixture.

  5. Alkaline sodium borohydride gel as a hydrogen source for PEMFC or an energy carrier for NaBH 4-air battery

    NASA Astrophysics Data System (ADS)

    Liu, B. H.; Li, Z. P.; Chen, L. L.

    In this preliminary study, we tried to use sodium polyacrylate as the super absorbent polymer to form alkaline NaBH 4 gel and explored its possibilities for borohydride hydrolysis and borohydride electro-oxidation. It was found that the absorption capacity of sodium polyacrylate decreased with increasing NaBH 4 concentration. The formed gel was rather stable in the sealed vessel but tended to slowly decompose in open air. Hydrogen generation from the gel was carried out using CoCl 2 catalyst precursor solutions. Hydrogen generation rate from the alkaline NaBH 4 gel was found to be higher and impurities in hydrogen were less than that from the alkaline NaBH 4 solution. The NaBH 4 gel also successfully powered a NaBH 4-air battery.

  6. Optimization of alkaline sulfite pretreatment and comparative study with sodium hydroxide pretreatment for improving enzymatic digestibility of corn stover.

    PubMed

    Liu, Huan; Pang, Bo; Wang, Haisong; Li, Haiming; Lu, Jie; Niu, Meihong

    2015-04-01

    In this study, alkaline sulfite pretreatment of corn stover was optimized. The influences of pretreatments on solid yield, delignification, and carbohydrate recovery under different pretreatment conditions and subsequent enzymatic hydrolysis were investigated. The effect of pretreatment was evaluated by enzymatic hydrolysis efficiency and the total sugar yield. The optimum pretreatment conditions were obtained, as follows: the total titratable alkali (TTA) of 12%, liquid/solid ratio of 6:1, temperature of 140 °C, and holding time of 20 min. Under those conditions, the solid yield was 55.24%, and the removal of lignin was 82.68%. Enzymatic hydrolysis rates of glucan and xylan for pretreated corn stover were 85.38% and 70.36%, and the total sugar yield was 74.73% at cellulase loading of 20 FPU/g and β-glucosidase loading of 10 IU/g for 48 h. Compared with sodium hydroxide pretreatment with the same amount of total titratable alkali, the total sugar yield was raised by about 10.43%. Additionally, the corn stover pretreated under the optimum pretreatment conditions was beaten by PFI at 1500 revolutions. After beating, enzymatic hydrolysis rates of glucan and xylan were 89.74% and 74.06%, and the total sugar yield was 78.58% at the same enzymatic hydrolysis conditions. Compared with 1500 rpm of PFI beating after sodium pretreatment with the same amount of total titratable alkali, the total sugar yield was raised by about 14.05%. PMID:25773993

  7. Reversibility of gastric mucosal lesions induced by sodium phosphate tablets and characterized by probe-based confocal laser endomicroscopy

    PubMed Central

    Coron, Emmanuel; Dewitte, Marie; Aubert, Philippe; Musquer, Nicolas; Neunlist, Michel; Bruley des Varannes, Stanislas

    2015-01-01

    Background and study aims: Adequate bowel preparation is key for the optimal quality of colonoscopy. The sodium phosphate laxatives used for preparation may induce gastric injuries. However, in vivo studies monitoring the effects of sodium phosphate on the gastric mucosa are currently lacking. We aimed to characterize the effects of sodium phosphate tablets (Colokit®; Mayoly Spindler, Chatou, France) on the gastric mucosa in a large-animal model. Methods: Fourteen anesthetized pigs were used for this study. Fundic mucosal sites were analyzed at 1.5, 24, and 72 hours after the endoscopically guided application of sodium phosphate tablets (NaPT) and placebo tablets (PlaT) and were compared with unexposed sites. Different mucosal parameters were assessed with white light endoscopy, probe-based confocal laser endomicroscopy (pCLE), histology, and ex vivo permeability measurements. Results: At 90 minutes after the application of NaPT, significant increases in epithelial irregularity and crypt pit intensity were observed with pCLE. These microscopic lesions persisted at 24 hours but were resolved at 72 hours. In addition, white light endoscopy revealed local exanthema in 57 % of the animals at 1.5 hours after NaPT application. Such lesions were observed in 22 % of the pigs at 24 hours and disappeared at 72 hours after application. After 1.5 hours, PlaT induced a slight but significant increase in epithelial irregularity, as well as architectural scores that were significantly lower than the ones induced by NaPT and that disappeared after 72 hours. Conclusions: The direct and prolonged gastric application of NaPT in pigs can induce acute superficial macroscopic and microscopic injuries that are reversible within 72 hours. PMID:26134776

  8. Microchannel conductivity measurements in microchip for on line monitoring of dephosphorylation rates of organic phosphates using paramagnetic-beads linked alkaline phosphatase.

    PubMed

    Kechadi, Mohammed; Sotta, Bruno; Gamby, Jean

    2015-01-01

    This paper presents the use of polymer coated microelectrodes for the realtime conductivity monitoring in a microchannel photoablated through the polymer without contact. Based on this strategy, a small conductometry sensor has been developed to record in time conductivity variation when an enzymatic reaction occurs through the channel. The rate constant determination, k2, for the dephosphorylation of organic phosphate-alkaline phosphatase-superparamagnetic beads complex using chemically different substrates such as adenosine monoesterphosphate, adenosine diphosphate and adenosine triphosphate was taken as an example to demonstrate selectivity and sensivity of the detection scheme. The k2 value measured for each adenosine phosphate decreases from 39 to 30 s(-1) in proportion with the number (3, 2 and 1) of attached phosphate moiety, thus emphasizing the steric hindrance effect on kinetics. PMID:25476378

  9. A stability-Indicating HPLC Method for Simultaneous Determination of Creatine Phosphate Sodium and its Related Substances in Pharmaceutical Formulation.

    PubMed

    Xie, Zengkun; Wei, Lihua; Yang, Qin; Yang, Min; Pan, Hongchun; Liu, Hong

    2016-01-01

    The objective of the study was to develop a simple, specific and stability-indicating HPLC method for the simultaneous determination of creatine phosphate sodium (CPS) and its related substances in pharmaceutical formulation. Separation of creatine phosphate sodium from its major process impurities and degradation products was achieved on a Hypersil BDS C18 column (250 × 4.6 mm, 5 μm) with an aqueous mobile phase containing 0.2% (w/v) tetrabutylammonium hydroxide (TAH) and 0.2% (w/v) monopotassium phosphate adjusted to pH 6.6 with orthophosphoric acid at a flow rate of 1.0 mL min(-1). The analytes were detected at 210 nm. Different chromatographic parameters were carefully optimized. The relative response factors for creatine, creatinine and creatinine phosphate disodium salt relative to CPS were determined. The method has been validated with respect to solution stability, system suitability, LOD, LOQ, linearity, accuracy, precision, specificity and robustness. The validation criteria were met in all cases. The developed method was successfully applied to determine the purity of CPS in pharmaceutical formulation. PMID:27610152

  10. A stability-Indicating HPLC Method for Simultaneous Determination of Creatine Phosphate Sodium and its Related Substances in Pharmaceutical Formulation

    PubMed Central

    Xie, Zengkun; Wei, Lihua; Yang, Qin; Yang, Min; Pan, Hongchun; Liu, Hong

    2016-01-01

    The objective of the study was to develop a simple, specific and stability-indicating HPLC method for the simultaneous determination of creatine phosphate sodium (CPS) and its related substances in pharmaceutical formulation. Separation of creatine phosphate sodium from its major process impurities and degradation products was achieved on a Hypersil BDS C18 column (250 × 4.6 mm, 5 μm) with an aqueous mobile phase containing 0.2% (w/v) tetrabutylammonium hydroxide (TAH) and 0.2% (w/v) monopotassium phosphate adjusted to pH 6.6 with orthophosphoric acid at a flow rate of 1.0 mL min-1. The analytes were detected at 210 nm. Different chromatographic parameters were carefully optimized. The relative response factors for creatine, creatinine and creatinine phosphate disodium salt relative to CPS were determined. The method has been validated with respect to solution stability, system suitability, LOD, LOQ, linearity, accuracy, precision, specificity and robustness. The validation criteria were met in all cases. The developed method was successfully applied to determine the purity of CPS in pharmaceutical formulation. PMID:27610152

  11. Comparison of the postoperative analgesic effects of paracetamol-codeine phosphate and naproxen sodium-codeine phosphate for lumbar disk surgery.

    PubMed

    Polat, Reyhan; Peker, Kevser; Gülöksüz, Çiğdem Topçu; Ergil, Julide; Akkaya, Taylan

    2015-09-01

    The aim of this study was to compared the efficacy of paracetamol-codeine phosphate and naproxen sodium-codeine phosphate on postoperative pain and tramadol consumption during the first 24 hours after a lumbar disk surgery. After Ethics Committee approval and informed consent had been obtained, 64 patients were allocated into three groups. Patients received oral paracetamol-codeine (300 mg + 30 mg; Group P), naproxen sodium-codeine (550 mg + 30 mg; Group N), or placebo tablets (Group C) 30 minutes prior to induction of anesthesia. Patient-controlled analgesia was supplied postoperatively using tramadol. Pain intensity, tramadol consumption, and side effects were recorded every 1 hour, 2 hours, 6 hours, 12 hours, and 24 hours after surgery. Whole study period pain intensity (visual analogue scale scores) was lower in Group P (p = 0.007) and Group N (p = 0.001), compared with Group C, however, there was no statistically significant difference between Group P and Group N regarding pain intensity (p > 0.05). Tramadol consumption was lower in Group P and Group N, compared with Group C (p < 0.001), and in turn the lowest incidence of tramadol consumption was detected in Group P compared with Group N (p < 0.001) and Group C (p < 0.001). Side effects were similar between the groups. Preemptive administration of paracetamol-codeine and naproxen sodium-codeine combination significantly reduced tramadol consumption and provided more effective analgesia compared with placebo. The paracetamol-codeine combination was superior to naproxen sodium-codeine with regard to tramadol consumption. PMID:26362959

  12. Oral antibodies to human intestinal alkaline phosphatase reduce dietary phytate phosphate bioavailability in the presence of dietary 1α-hydroxycholecalciferol.

    PubMed

    Bobeck, Elizabeth A; Hellestad, Erica M; Helvig, Christian F; Petkovich, P Martin; Cook, Mark E

    2016-03-01

    While it is well established that active vitamin D treatment increases dietary phytate phosphate utilization, the mechanism by which intestinal alkaline phosphatase (IAP) participates in phytate phosphate use is less clear. The ability of human IAP (hIAP) oral antibodies to prevent dietary phytate phosphate utilization in the presence of 1α-hydroxycholecalciferol (1α-(OH) D3) in a chick model was investigated. hIAP specific chicken immunoglobulin Y (IgY) antibodies were generated by inoculating laying hens with 17 synthetic peptides derived from the human IAP amino acid sequence and harvesting egg yolk. Western blot analysis showed all antibodies recognized hIAP and 6 of the 8 antibodies selected showed modest inhibition of hIAP activity in vitro (6 to 33% inhibition). In chicks where dietary phosphate was primarily in the form of phytate, 4 selected hIAP antibodies inhibited 1α-(OH) D3-induced increases in blood phosphate, one of which, generated against selected peptide (MFPMGTPD), was as effective as sevelamer hydrochloride in preventing the 1α-(OH) D3-induced increase in blood phosphate, but ineffective in preventing an increase in body weight gain and bone ash induced by 1α-(OH) D3. These studies demonstrated that orally-delivered antibodies to IAP limit dietary phytate-phosphate utilization in chicks treated with 1α-(OH) D3, and implicate IAP as an important host enzyme in increasing phytate phosphate bioavailability in 1α-(OH) D3 fed chicks. PMID:26666254

  13. Uranium(VI) Diffusion in Sodium-Montmorillonite at Alkaline pH Conditions

    NASA Astrophysics Data System (ADS)

    Tinnacher, R. M.; Davis, J. A.; Tournassat, C.; Birkholzer, J. T.

    2015-12-01

    Diffusive transport of uranium(VI) in montmorillonite clay and bentonite has important implications for uranium(VI) mobility in engineered barrier systems or host rocks in high level radioactive waste repositories, and clay-rich soils and sediments in the environment. The prediction of uranium(VI) adsorption and diffusion in clay-rich media, however, is complicated by (1) the complexity of the mineralogical structure of montmorillonite, in terms of its pore-size distributions and available surface site types, and (2) the complex uranium(VI) solution speciation, which can include cationic, uncharged, and anionic complexes, depending on solution conditions. For instance, a partial or full exclusion of anions from negatively charged clay interlayer spaces could change the effective 'anion-accessible' porosity and decrease the diffusive flux of these solutes under steady state conditions. In contrast, weak cation exchange reactions can result in 'surface diffusion' of adsorbed cations, such as UO2OH+, in addition to diffusion in the liquid phase, resulting in greater diffusive fluxes at steady state. In order to investigate these complex interactions, we performed two, lab-scale uranium(VI) through-diffusion experiments in lightly compacted Na-montmorillonite at slightly different, alkaline pH conditions (average pH values of 8.69 and 8.87). Observed uranium(VI) diffusive fluxes were decreased by approximately an order of magnitude in comparison to a tritium tracer. This indicates a relevance of 'anion exclusion' effects, the full or partial exclusion of anionic U(VI)-carbonato species from clay interlayer spaces. In addition, uranium(VI) sorption reactions were shown to be relevant in the diffusion experiments, even at alkaline pH values of around 8.7 and 8.9, where uranium(VI) sorption is low compared to other pH conditions. Despite the similarity of pH conditions, different degrees of uranium(VI) retardation were determined for the two systems. Additionally, we

  14. Real-life conditions of use of sodium phosphate tablets for colon cleansing before colonoscopy

    PubMed Central

    Hagège, Hervé; Laugier, René; Nahon, Stéphane; Coulom, Pierre; Isnard-Bagnis, Corinne; Albert-Marty, Annaïck

    2015-01-01

    Background and study aims: The purpose of this study was to describe the real-life conditions of use, efficacy, safety, and acceptability of sodium phosphate (NaP) tablets for colon cleansing in routine medical practice in France. Patients and methods: A total of 996 patients undergoing bowel preparation were enrolled by 108 gastroenterologists in this observational, longitudinal, prospective, multicenter study. The conditions of use of NaP tablets were assessed with a composite endpoint, which included six criteria for patient compliance with the recommended administration scheme and a criterion for the absence of contraindications to NaP use. Results: Adequate use of NaP was reported for 75.1 % of the patients. The main reasons for misuse were a smaller fluid intake than expected with a dose of 4 tablets and noncompliance with age-related contraindications. The quality of cleansing was satisfactory: the Boston Bowel Preparation Scale (BBPS) total score was 7 or higher in 75.4 % of the patients. Gastroscopy associated with colonoscopy in 38.9 % of the patients revealed gastric lesions, which were considered as possibly related to the use of NaP tablets in 10.3 % of them. Vomiting occurred in 9.8 % of the patients, and 0.6 % discontinued bowel preparation after an adverse event. No electrolyte disorders or renal impairment was reported, even if not systematically sought. The acceptability of the NaP tablets was high, particularly among patients who previously had undergone other methods of bowel preparation. Conclusions: Despite being defined according to strict criteria, adequate use of NaP tablets was observed in a high percentage of patients. The quality of colon cleansing and the safety and acceptability of NaP tablets were satisfactory and consistent with data from randomized clinical studies. PMID:26357680

  15. Randomized controlled trial of sodium phosphate tablets vs polyethylene glycol solution for colonoscopy bowel cleansing

    PubMed Central

    Jung, Yoon Suk; Lee, Chang Kyun; Kim, Hyo Jong; Eun, Chang Soo; Han, Dong Soo; Park, Dong Il

    2014-01-01

    AIM: To compare efficacy, patient compliance, acceptability, satisfaction, safety, and adenoma detection rate of sodium phosphate tablets (NaP, CLICOLONTM) to a standard 4 L polyethylene glycol (PEG) solution for bowel cleansing for adults undergoing colonoscopy. METHODS: In this multicenter, randomized, prospective, investigator-blind study, the relatively young (19-60 years) healthy outpatients without comorbidity were randomly assigned to one of two arms. All colonoscopy were scheduled in the morning. The NaP group was asked to take 4 tablets, 5 times the evening before and 4 tablets, 3 times early on the morning of the colonoscopy. The PEG group was asked to ingest 2 L of solution the evening before and 2 L early in the morning of the procedure. Adequacy of bowel preparation was scored using the Boston bowel preparation scale. RESULTS: No significant differences were observed between the NaP group (n = 158) and PEG group (n = 162) in bowel cleansing quality (adequate preparation 93.0% vs 92.6%, P = 0.877), patient compliance (P = 0.228), overall adverse events (63.3% vs 69.1%, P = 0.269), or adenoma detection rate (34.8% vs 35.2%, P = 0.944). Patient acceptability, satisfaction, and patient rating of taste were higher in the NaP group than in the PEG group (P < 0.001). CONCLUSION: NaP tablets, compared with PEG solution, produced equivalent colon cleansing, did not cause more side effects, and had better patient acceptability and satisfaction in the relatively young (age < 60 years) healthy individuals without comorbidity. An oral tablet formulation could make bowel preparation less burdensome, resulting in greater patient participation in screening programs. PMID:25400471

  16. Characterization and application of sodium di(2-ethylhexyl) sulfosuccinate and sodium di(2-ethylhexyl) phosphate surfactants as pseudostationary phases in micellar electrokinetic chromatography.

    PubMed

    Akbay, Cevdet; Wilmot, Nathan; Agbaria, Rezik A; Warner, Isiah M

    2004-12-17

    Sodium di(2-ethylhexyl) sulfosuccinate (DOSS) and sodium di(2-ethylhexyl) phosphate (NaDEHP) surfactants, with double alkyl chains and negatively charged headgroups, were characterized using fluorescence quenching, densitometry, and tensiometry techniques to determine their aggregation number, partial specific volume, and critical aggregation concentration. These two surfactants were then applied as pseudostationary phases in micellar electrokinetic chromatography (MEKC) for separations of alkyl phenyl ketones. The aggregation number of NaDEHP was found to be more than two-fold higher than that of DOSS. The partial specific volumes of NaDEHP and DOSS were found to be 0.9003 and 0.8371 mL/g, respectively. The critical aggregation concentrations are 5.12 and 1.80 mM for NaDEHP and DOSS, respectively. The DOSS surfactant provided a wider separation window and had a greater hydrophobic environment than the NaDEHP surfactant under the MEKC experimental conditions studied. PMID:15633750

  17. Autosomal-Recessive Mutations in SLC34A1 Encoding Sodium-Phosphate Cotransporter 2A Cause Idiopathic Infantile Hypercalcemia.

    PubMed

    Schlingmann, Karl P; Ruminska, Justyna; Kaufmann, Martin; Dursun, Ismail; Patti, Monica; Kranz, Birgitta; Pronicka, Ewa; Ciara, Elzbieta; Akcay, Teoman; Bulus, Derya; Cornelissen, Elisabeth A M; Gawlik, Aneta; Sikora, Przemysław; Patzer, Ludwig; Galiano, Matthias; Boyadzhiev, Veselin; Dumic, Miroslav; Vivante, Asaf; Kleta, Robert; Dekel, Benjamin; Levtchenko, Elena; Bindels, René J; Rust, Stephan; Forster, Ian C; Hernando, Nati; Jones, Glenville; Wagner, Carsten A; Konrad, Martin

    2016-02-01

    Idiopathic infantile hypercalcemia (IIH) is characterized by severe hypercalcemia with failure to thrive, vomiting, dehydration, and nephrocalcinosis. Recently, mutations in the vitamin D catabolizing enzyme 25-hydroxyvitamin D3-24-hydroxylase (CYP24A1) were described that lead to increased sensitivity to vitamin D due to accumulation of the active metabolite 1,25-(OH)2D3. In a subgroup of patients who presented in early infancy with renal phosphate wasting and symptomatic hypercalcemia, mutations in CYP24A1 were excluded. Four patients from families with parental consanguinity were subjected to homozygosity mapping that identified a second IIH gene locus on chromosome 5q35 with a maximum logarithm of odds (LOD) score of 6.79. The sequence analysis of the most promising candidate gene, SLC34A1 encoding renal sodium-phosphate cotransporter 2A (NaPi-IIa), revealed autosomal-recessive mutations in the four index cases and in 12 patients with sporadic IIH. Functional studies of mutant NaPi-IIa in Xenopus oocytes and opossum kidney (OK) cells demonstrated disturbed trafficking to the plasma membrane and loss of phosphate transport activity. Analysis of calcium and phosphate metabolism in Slc34a1-knockout mice highlighted the effect of phosphate depletion and fibroblast growth factor-23 suppression on the development of the IIH phenotype. The human and mice data together demonstrate that primary renal phosphate wasting caused by defective NaPi-IIa function induces inappropriate production of 1,25-(OH)2D3 with subsequent symptomatic hypercalcemia. Clinical and laboratory findings persist despite cessation of vitamin D prophylaxis but rapidly respond to phosphate supplementation. Therefore, early differentiation between SLC34A1 (NaPi-IIa) and CYP24A1 (24-hydroxylase) defects appears critical for targeted therapy in patients with IIH. PMID:26047794

  18. Ascorbic Acid-Assisted Synthesis of Mesoporous Sodium Vanadium Phosphate Nanoparticles with Highly sp(2) -Coordinated Carbon Coatings as Efficient Cathode Materials for Rechargeable Sodium-Ion Batteries.

    PubMed

    Hung, Tai-Feng; Cheng, Wei-Jen; Chang, Wen-Sheng; Yang, Chang-Chung; Shen, Chin-Chang; Kuo, Yu-Lin

    2016-07-18

    Herein, mesoporous sodium vanadium phosphate nanoparticles with highly sp(2) -coordinated carbon coatings (meso-Na3 V2 (PO4 )3 /C) were successfully synthesized as efficient cathode material for rechargeable sodium-ion batteries by using ascorbic acid as both the reductant and carbon source, followed by calcination at 750 °C in an argon atmosphere. Their crystalline structure, morphology, surface area, chemical composition, carbon nature and amount were systematically explored. Following electrochemical measurements, the resultant meso-Na3 V2 (PO4 )3 /C not only delivered good reversible capacity (98 mAh g(-1) at 0.1 A g(-1) ) and superior rate capability (63 mAh g(-1) at 1 A g(-1) ) but also exhibited comparable cycling performance (capacity retention: ≈74 % at 450 cycles at 0.4 A g(-1) ). Moreover, the symmetrical sodium-ion full cell with excellent reversibility and cycling stability was also achieved (capacity retention: 92.2 % at 0.1 A g(-1) with 99.5 % coulombic efficiency after 100 cycles). These attributes are ascribed to the distinctive mesostructure for facile sodium-ion insertion/extraction and their continuous sp(2) -coordinated carbon coatings, which facilitate electronic conduction. PMID:27346677

  19. Stability-Indicating HPLC Method for Simultaneous Determination of Chloramphenicol, Dexamethasone Sodium Phosphate and Tetrahydrozoline Hydrochloride in Ophthalmic Solution

    PubMed Central

    AlAani, Hashem; Alnukkary, Yasmin

    2016-01-01

    Purpose: A simple stability-indicating RP-HPLC assay method was developed and validated for quantitative determination of Chloramphenicol, Dexamethasone Sodium Phosphate and Tetrahydrozoline Hydrochloride in ophthalmic solution in the presence of 2-amino-1-(4-nitrophenyl)propane-1,3-diol, a degradation product of Chloramphenicol, and Dexamethasone, a degradation product of Dexamethasone Sodium Phosphate. Methods: Effective chromatographic separation was achieved using C18 column (250 mm, 4.6 mm i.d., 5 μm) with isocratic mobile phase consisting of acetonitrile - phosphate buffer (pH 4.0; 0.05 M) (30:70, v/v) at a flow rate of 1 mL/minute. The column temperature was maintained at 40°C and the detection wavelength was 230 nm. Results: The proposed HPLC procedure was statistically validated according to the ICH guideline, and was proved to be stability-indicating by resolution of the APIs from their forced degradation products. Conclusion: The developed method is suitable for the routine analysis as well as stability studies. PMID:27123429

  20. Sodium Sulfate Separation from Aqueous Alkaline Solutions via Crystalline Urea-Functionalized Capsules: Thermodynamics and Kinetics of Crystallization

    DOE PAGESBeta

    Custelcean, Radu; Sloop, Frederick V.; Rajbanshi, Arbin; Wan, Shun; Moyer, Bruce A.

    2014-12-04

    We measured the thermodynamics and kinetics of crystallization of sodium sulfate with a tripodal tris-urea receptor (L1) from aqueous alkaline solutions in the 15 55 C temperature range, with the goal of identifying the optimal conditions for efficient and quick sulfate removal from nuclear wastes. The use of radiolabeled Na235SO4 provided a practical way to monitor the sulfate concentration in solution by liquid scintillation counting. Our results are consistent with a two-step crystallization mechanism, involving relatively quick dissolution of crystalline L1 followed by the rate-limiting crystallization of the Na2SO4(L1)2(H2O)4 capsules. We found that temperature exerted relatively little influence over themore » equilibrium sulfate concentration, which ranged between 0.004 and 0.011 M. Moreover, this corresponds to 77 91% removal of sulfate from a solution containing 0.0475 M initial sulfate concentration, as found in a typical Hanford waste tank. The apparent pseudo-first-order rate constant for sulfate removal increased 20-fold from 15 to 55 C, corresponding to an activation energy of 14.1 kcal/mol. At the highest measured temperature of 55 C, 63% and 75% of sulfate was removed from solution within 8 h and 24 h, respectively.« less

  1. Sodium Sulfate Separation from Aqueous Alkaline Solutions via Crystalline Urea-Functionalized Capsules: Thermodynamics and Kinetics of Crystallization

    SciTech Connect

    Custelcean, Radu; Sloop, Frederick V.; Rajbanshi, Arbin; Wan, Shun; Moyer, Bruce A.

    2014-12-04

    We measured the thermodynamics and kinetics of crystallization of sodium sulfate with a tripodal tris-urea receptor (L1) from aqueous alkaline solutions in the 15 55 C temperature range, with the goal of identifying the optimal conditions for efficient and quick sulfate removal from nuclear wastes. The use of radiolabeled Na235SO4 provided a practical way to monitor the sulfate concentration in solution by liquid scintillation counting. Our results are consistent with a two-step crystallization mechanism, involving relatively quick dissolution of crystalline L1 followed by the rate-limiting crystallization of the Na2SO4(L1)2(H2O)4 capsules. We found that temperature exerted relatively little influence over the equilibrium sulfate concentration, which ranged between 0.004 and 0.011 M. Moreover, this corresponds to 77 91% removal of sulfate from a solution containing 0.0475 M initial sulfate concentration, as found in a typical Hanford waste tank. The apparent pseudo-first-order rate constant for sulfate removal increased 20-fold from 15 to 55 C, corresponding to an activation energy of 14.1 kcal/mol. At the highest measured temperature of 55 C, 63% and 75% of sulfate was removed from solution within 8 h and 24 h, respectively.

  2. Comparison of sodium zirconium phosphate-structured HLW forms and synroc for high-level nuclear waste immobilization

    SciTech Connect

    Zyryanov, V.N.; Vance, E.R.

    1996-12-31

    The incorporation of (a) Cs/Sr as simulated heat-generating isotopes contained in Purex reprocessing waste, (b) simulated actinides, and (c) simulated Purex waste in sodium zirconium phosphate (NZP) has been studied. The samples were prepared by sintering, by hot pressing and by hot isostatic pressing in metal bellows containers. The short-term chemical durability of the phosphate-based material containing Purex waste was within an order of magnitude of that for Synroc-C, as measured by 7-day MCC-1 tests at 90{degrees}C. The dissolution behavior showed evidence of re-precipitation phenomena, even after times as short as 28 days. Potential for improvement of NZP-based ceramics for HLW management is discussed. 19 refs., 4 figs., 3 tabs.

  3. Probing the origins of catalytic discrimination between phosphate and sulfate monoester hydrolysis: comparative analysis of alkaline phosphatase and protein tyrosine phosphatases.

    PubMed

    Andrews, Logan D; Zalatan, Jesse G; Herschlag, Daniel

    2014-11-01

    Catalytic promiscuity, the ability of enzymes to catalyze multiple reactions, provides an opportunity to gain a deeper understanding of the origins of catalysis and substrate specificity. Alkaline phosphatase (AP) catalyzes both phosphate and sulfate monoester hydrolysis reactions with a ∼10(10)-fold preference for phosphate monoester hydrolysis, despite the similarity between these reactions. The preponderance of formal positive charge in the AP active site, particularly from three divalent metal ions, was proposed to be responsible for this preference by providing stronger electrostatic interactions with the more negatively charged phosphoryl group versus the sulfuryl group. To test whether positively charged metal ions are required to achieve a high preference for the phosphate monoester hydrolysis reaction, the catalytic preference of three protein tyrosine phosphatases (PTPs), which do not contain metal ions, were measured. Their preferences ranged from 5 × 10(6) to 7 × 10(7), lower than that for AP but still substantial, indicating that metal ions and a high preponderance of formal positive charge within the active site are not required to achieve a strong catalytic preference for phosphate monoester over sulfate monoester hydrolysis. The observed ionic strength dependences of kcat/KM values for phosphate and sulfate monoester hydrolysis are steeper for the more highly charged phosphate ester with both AP and the PTP Stp1, following the dependence expected based on the charge difference of these two substrates. However, the dependences for AP were not greater than those of Stp1 and were rather shallow for both enzymes. These results suggest that overall electrostatics from formal positive charge within the active site is not the major driving force in distinguishing between these reactions and that substantial discrimination can be attained without metal ions. Thus, local properties of the active site, presumably including multiple positioned dipolar

  4. Calcium-phosphate biomineralization induced by alkaline phosphatase activity in Escherichia coli: localization, kinetics and potential signatures in the fossil record

    NASA Astrophysics Data System (ADS)

    Cosmidis, Julie; Benzerara, Karim; Guyot, François; Skouri-Panet, Fériel; Duprat, Elodie; Férard, Céline; Guigner, Jean-Michel; Babonneau, Florence; Coelho, Cristina

    2015-12-01

    Bacteria are thought to play an important role in the formation of calcium-phosphate minerals composing marine phosphorites, as supported by the common occurrence of fossil microbes in these rocks. Phosphatase enzymes may play a key role in this process. Indeed, they may increase the supersaturation with respect to Ca-phosphates by releasing orthophosphate ions following hydrolysis of organic phosphorus. However, several questions remain unanswered about the cellular-level mechanisms involved in this model, and its potential signatures in the mineral products. We studied Ca-phosphate precipitation by different strains of Escherichia coli which were genetically modified to differ in the abundance and cellular localization of the alkaline phosphatase (PHO A) produced. The mineral precipitated by either E. coli or purified PHO A was invariably identified as a carbonate-free non-stoichiometric hydroxyapatite. However, the bacterial precipitates could be discriminated from the ones formed by purified PHO A at the nano-scale. PHO A localization was shown to influence the pattern of Ca-phosphate nucleation and growth. Finally, the rate of calcification was proved to be consistent with the PHO A enzyme kinetics. Overall, this study provides mechanistic keys to better understand phosphogenesis in the environment, and experimental references to better interpret the microbial fossil record in phosphorites.

  5. Bowel preparation for colonoscopy using standard vs reduced doses of sodium phosphate: A single-blind randomized controlled study

    PubMed Central

    Koshitani, Tatsuya; Kawada, Mayumi; Yoshikawa, Toshikazu

    2014-01-01

    AIM: To evaluate the efficacy of a colonoscopy preparation that utilizes a reduced dose of sodium phosphate (NaP) and an adjunct. METHODS: Sixty-two patients requiring screening colonoscopies were studied. Each patient was randomly allocated to receive either 50 NaP tablets (50 g) or 30 NaP tablets (30 g) with 10 mL of 0.75% sodium picosulfate for bowel preparation. NaP was administered at a rate of five tablets (5 g) or three tablets (3 g) every 15 min with 200 mL of water, beginning five to six hours before colonoscopy. The sodium picosulfate was administered with 200 mL of water on the night before the procedure. Both groups were compared in term of the efficacies of colonic cleansing, the time required for completion of the bowel preparation, and acceptability of the preparation. RESULTS: Sixty patients (n = 30 for each group) were analyzed. The cleansing efficacy tended to be higher in the 30 g NaP plus sodium picosulfate group as assessed by the mean total Ottawa scale score (50 g NaP 6.70 ± 1. 42 vs 30 g NaP plus sodium picosulfate 6.17 ± 1.18 P = 0.072). The mean time for bowel preparation tended to be shorter in the 30 g NaP plus sodium picosulfate group (50 g NaP 189.9 ± 64.0 min vs 30 g NaP plus sodium picosulfate 161.8 ± 57.6 min, P = 0.065). There were no significant differences between the two groups in the acceptability of the preparations (50 g NaP 83.3% vs 30 g NaP plus sodium picosulfate 86.7%, P = 0.500). There were no adverse events related to bowel preparation in either of the groups. CONCLUSION: The colonoscopy preparation that utilized 30 g NaP with sodium picosulfate was comparable to that utilizing 50 g NaP. This novel bowel preparation might be useful before colonoscopy. PMID:25132922

  6. The effect of chemical agents on the turnover of the bound phosphate associated with the sodium-and-potassium ion-stimulated adenosine triphosphatase in ox brain microsomes

    PubMed Central

    Rodnight, R.

    1970-01-01

    1. The effect of chemical agents on the turnover of the Na+-dependent bound phosphate and the simultaneous Na+-dependent hydrolysis of ATP by a membrane preparation from ox brain was studied at an ATP/protein ratio of 12.5pmol/μg. 2. The agents were added immediately after phosphorylation of the preparation in a medium containing 50mm-sodium chloride and 2.5μm-[γ-32P]ATP. 3. Concentrations of sodium chloride above 150mm, calcium chloride to 20mm and suramin to 1.4mm inhibited both phosphorylation and dephosphorylation and concomitantly slowed ATP hydrolysis. At 125mm-sodium chloride dephosphorylation and hydrolysis were slightly slowed without affecting phosphorylation. 4. Ethanol to 1.6m concentration inhibited dephosphorylation without affecting phosphorylation; the bound phosphate was increased and ATP hydrolysis slowed. 5. Ouabain to 4mm concentration partially inhibited ATP hydrolysis and caused a transient (1–2s) rise in bound phosphate followed by a rapid fall to a lower plateau value, which eventually declined to zero by the time ATP hydrolysis was complete. 6. Of the detergents examined Lubrol W, Triton X-100 and sodium deoxycholate had no significant effect on turnover. Sodium dodecyl sulphate and sodium decyl sulphate to 3.5mm and 20mm respectively completely inhibited turnover and ATP hydrolysis and stabilized the bound phosphate. PMID:4250238

  7. Effect of zinc phosphate chemical conversion coating on corrosion behaviour of mild steel in alkaline medium: protection of rebars in reinforced concrete

    NASA Astrophysics Data System (ADS)

    Simescu, Florica; Idrissi, Hassane

    2008-12-01

    We outline the ability of zinc phosphate coatings, obtained by chemical conversion, to protect mild steel rebars against localized corrosion, generated by chloride ions in alkaline media. The corrosion resistance of coated steel, in comparison with uncoated rebars and coated and uncoated steel rebars embedded in mortar, were evaluated by open-circuit potential, potentiodynamic polarization, cronoamperometry and electrochemical impedance spectroscopy. The coated surfaces were characterized by x-ray diffraction and scanning electron microscopy. First, coated mild steel rebars were studied in an alkaline solution with and without chloride simulating a concrete pore solution. The results showed that the slow dissolution of the coating generates hydroxyapatite Ca10(PO4)6(OH)2. After a long immersion, the coating became dense and provided an effective corrosion resistance compared with the mild steel rebar. Secondly, the coated and uncoated steel rebars embedded in mortar and immersed in chloride solution showed no corrosion or deterioration of the coated steel. Corrosion rate is considerably lowered by this phosphate coating.

  8. Role of the sodium-dependent phosphate co-transporters and of the phosphate complexes of uranyl in the cytotoxicity of uranium in LLC-PK{sub 1} cells

    SciTech Connect

    Muller, D. . E-mail: dany.muller@kcl.ac.uk; Houpert, P. . E-mail: pascale.houpert@irsn.fr; Cambar, J. . E-mail: marie-helene.napoli@cea.fr

    2006-07-15

    Although uranium is a well-characterized nephrotoxic agent, very little is known at the cellular and molecular level about the mechanisms underlying the uptake and toxicity of this element in proximal tubule cells. The aim of this study was thus to characterize the species of uranium that are responsible for its cytotoxicity and define the mechanism which is involved in the uptake of the cytotoxic fraction of uranium using two cell lines derived from kidney proximal (LLC-PK{sub 1}) and distal (MDCK) tubule as in vitro models. Treatment of LLC-PK{sub 1} cells with colchicine, cytochalasin D, concanavalin A and PMA increased the sodium-dependent phosphate co-transport and the cytotoxicity of uranium. On the contrary, replacement of the extra-cellular sodium with N-methyl-D-glucamine highly reduced the transport of phosphate and the cytotoxic effect of uranium. Uranium cytotoxicity was also dependent upon the extra-cellular concentration of phosphate and decreased in a concentration-dependent manner by 0.1-10 mM phosphonoformic acid, a competitive inhibitor of phosphate uptake. Consistent with these observations, over-expression of the rat proximal tubule sodium-dependent phosphate co-transporter NaPi-IIa in stably transfected MDCK cells significantly increased the cytotoxicity of uranium, and computer modeling of uranium speciation showed that uranium cytotoxicity was directly dependent on the presence of the phosphate complexes of uranyl UO{sub 2}(PO{sub 4}){sup -} and UO{sub 2}(HPO{sub 4}){sub aq}. Taken together, these data suggest that the cytotoxic fraction of uranium is a phosphate complex of uranyl whose uptake is mediated by a sodium-dependent phosphate co-transporter system.

  9. The relation between the structure and electrochemical performance of sodiated iron phosphate in sodium-ion batteries

    NASA Astrophysics Data System (ADS)

    Liu, Yao; Zhou, Yirong; Zhang, Junxi; Zhang, Shiming; Ren, Ping

    2016-05-01

    The structure and electrochemical performance of sodiated iron phosphate were investigated by means of X-ray diffraction, high-resolution transmission electron microscopy and electrochemical measurements. The results indicate that after the sodiation process, all FePO4 samples transform into the amorphous sodium iron phosphate and crystallite NaFePO4, namely triphylite NaFePO4 for amorphous FePO4 and maricite NaFePO4 for trigonal FePO4, respectively. The amorphous FePO4 samples show excellent electrochemical performance in terms of cyclic stability and discharge capacity, while trigonal FePO4 displays poor electrochemical performance. The outstanding electrochemical performance of amorphous FePO4 was attributed to the amorphous and triphylite NaFePO4 with high electrochemical activity. Those findings indicate that amorphous FePO4 can be transformed into active NaFePO4, which may have great potential as an electrode material for sodium-ion batteries.

  10. Effect of Sodium Phosphate Supplementation on Cycling Time Trial Performance and VO2 1 and 8 Days Post Loading

    PubMed Central

    Brewer, Cameron P.; Dawson, Brian; Wallman, Karen E.; Guelfi, Kym J.

    2014-01-01

    This study examined the effect of 6 days of sodium phosphate (SP) (50 mg·kg·FFM-1·day-1) or placebo (PL) supplementation in trained cyclists on either 100 kJ (23.9 Kcal) (~3-4 min) or 250 kJ (59.7 Kcal) (~10-12 min) time trials performances both 1 and 8 days post-supplementation. Trials were performed in a counterbalanced crossover design, with a 28-day washout period between supplementation phases. No significant differences, moderate-large ES (d) or likely (or greater) smallest worthwhile change (SWC) values were recorded for time to completion and mean power output on days 1 and 8 post-supplementation, both within and between SP and PL for either the 100 or 250 kJ (23.9 or 59.7 Kcal) trials. In the 100 kJ (23.9 Kcal) trial (only) first minute VO2 tended to be higher in SP8 than both PL8 (d = 0.60; 88/10/2 SWC) and SP1 (d = 0.47: 82/15/3 SWC), as was mean VO2 (PL8: d = 0.77; 93/6/1 SWC and SP1: d = 0.84; 90/8/3 SWC). No significant differences were found for heart rate, ratings of perceived exertion and blood lactate post-exercise within or between any trials, while serum phosphate values were not different before or after supplementation with SP or PL. In conclusion, this study showed a tendency for increased VO2 in a short duration (100 kJ/ 23.9 Kcal: ~3-4 min) cycling test on day 8 after SP supplementation, but no differences in 100 or 250 kJ (23.9 or 59.7 Kcal) time trials performances were observed. Key Points Studies investigating the effects of sodium phosphate loading on shorter duration (<15 min) and higher intensity exercise performance are lacking, as is research on how long any ergogenic effect may last. Loading did not improve cycling time trial (~3-4 min and 10-12 min) performance either 1 or 8 days after supplementation. Future studies should investigate the effect of sodium phosphate loading on repeated sprints and simulated cycling road race performance over extended durations (>30 min), where it may be likely to have a more beneficial effect

  11. Knockdown of the sodium-dependent phosphate co-transporter 2b (NPT2b) suppresses lung tumorigenesis.

    PubMed

    Hong, Seong-Ho; Minai-Tehrani, Arash; Chang, Seung-Hee; Jiang, Hu-Lin; Lee, Somin; Lee, Ah-Young; Seo, Hwi Won; Chae, Chanhee; Beck, George R; Cho, Myung-Haing

    2013-01-01

    The sodium-dependent phosphate co-transporter 2b (NPT2b) plays an important role in maintaining phosphate homeostasis. In previous studies, we have shown that high dietary inorganic phosphate (Pi) consumption in mice stimulated lung tumorigenesis and increased NPT2b expression. NPT2b has also been found to be highly expressed in human lung cancer tissues. The association of high expression of NPT2b in the lung with poor prognosis in oncogenic lung diseases prompted us to test whether knockdown of NPT2b may regulate lung cancer growth. To address this issue, aerosols that contained small interfering RNA (siRNA) directed against NPT2b (siNPT2b) were delivered into the lungs of K-ras (LA1) mice, which constitute a murine model reflecting human lung cancer. Our results clearly showed that repeated aerosol delivery of siNPT2b successfully suppressed lung cancer growth and decreased cancer cell proliferation and angiogenesis, while facilitating apoptosis. These results strongly suggest that NPT2b plays a role lung tumorigenesis and represents a novel target for lung cancer therapy. PMID:24194864

  12. Fibroblast Growth Factor-23-mediated Inhibition of Renal Phosphate Transport in Mice Requires Sodium-Hydrogen Exchanger Regulatory Factor-1 (NHERF-1) and Synergizes with Parathyroid Hormone*

    PubMed Central

    Weinman, Edward J.; Steplock, Deborah; Shenolikar, Shirish; Biswas, Rajatsubhra

    2011-01-01

    Fibroblast growth factor-23 (FGF-23) inhibits sodium-dependent phosphate transport in brush border membrane vesicles derived from hormone-treated kidney slices of the mouse and in mouse proximal tubule cells by processes involving mitogen-activated protein kinase (MAPK) but not protein kinase A (PKA) or protein kinase C (PKC). By contrast, phosphate transport in brush border membrane vesicles and proximal tubule cells from sodium-hydrogen exchanger regulatory factor-1 (NHERF-1)-null mice were resistant to the inhibitory effect of FGF-23 (10−9 m). Infection of NHERF-1-null proximal tubule cells with wild-type adenovirus-GFP-NHERF-1 increased basal phosphate transport and restored the inhibitory effect of FGF-23. Infection with adenovirus-GFP-NHERF-1 containing a S77A or T95D mutation also increased basal phosphate transport, but the cells remained resistant to FGF-23 (10−9 m). Low concentrations of FGF-23 (10−13 m) and PTH (10−11 m) individually did not inhibit phosphate transport or activate PKA, PKC, or MAPK. When combined, however, these hormones markedly inhibited phosphate transport associated with activation of PKC and PKA but not MAPK. These studies indicate that FGF-23 inhibits phosphate transport in the mouse kidney by processes that involve the scaffold protein NHERF-1. In addition, FGF-23 synergizes with PTH to inhibit phosphate transport by facilitating the activation of the PTH signal transduction pathway. PMID:21908609

  13. A single electrochemical biosensor for detecting the activity and inhibition of both protein kinase and alkaline phosphatase based on phosphate ions induced deposition of redox precipitates.

    PubMed

    Shen, Congcong; Li, Xiangzhi; Rasooly, Avraham; Guo, Linyan; Zhang, Kaina; Yang, Minghui

    2016-11-15

    Protein kinase (PKA) and alkaline phosphatase (ALP) are clinically relevant enzymes for a number of diseases. In this work, we developed a new simple electrochemical biosensor for the detection of the activity and inhibition of both PKA and ALP. One common feature of the PKA and ALP catalyzing process is that PKA can hydrolysis adenosine-5'-triphosphate (ATP) and ALP can hydrolysis pyrophosphate, both reactions produce phosphate ions, and the amount of phosphate ion produced is proportional to enzyme activity. Our assay is based on the principle that phosphate ions react with molybdate to form redox molybdophosphate precipitates on the electrode surface, thus generating electrochemical current. The detection limit for PKA and ALP were much lower than existing assays. The biosensor has good specificity and was used to measure drug-stimulated PKA from lysates of HeLa cells. We also evaluated the use of the biosensor as a screening tool for enzyme inhibitors. To the best of our knowledge, this is the first report of a biosensor capable of detecting the activity of both PKA and ALP. This tool has the potential to simplify PKA and ALP clinical measurement, thereby improving diagnostics of relevant diseases. It also may serve as the basis for a simple screening method for new enzyme inhibitors for disease treatment. PMID:27179562

  14. Pyridoxamine-5-phosphate enzyme-linked immune mass spectrometric assay substrate for linear absolute quantification of alkaline phosphatase to the yoctomole range applied to prostate specific antigen.

    PubMed

    Florentinus-Mefailoski, Angelique; Marshall, John G

    2014-11-01

    There is a need to measure proteins that are present in concentrations below the detection limits of existing colorimetric approaches with enzyme-linked immunoabsorbent assays (ELISA). The powerful enzyme alkaline phosphatase conjugated to the highly specific bacterial protein streptavidin binds to biotinylated macromolecules like proteins, antibodies, or other ligands and receptors with a high affinity. The binding of the biotinylated detection antibody, with resulting amplification of the signal by the catalytic production of reporter molecules, is key to the sensitivity of ELISA. The specificity and amplification of the signal by the enzyme alkaline phosphatase in ELISA together with the sensitivity of liquid chromatography electrospray ionization and mass spectrometry (LC-ESI-MS) to detect femtomole to picomole amounts of reporter molecules results in an ultrasensitive enzyme-linked immune mass spectrometric assay (ELIMSA). The novel ELIMSA substrate pyridoxamine-5-phosphate (PA5P) is cleaved by the enzyme alkaline phosphatase to yield the basic and hydrophilic product pyridoxamine (PA) that elutes rapidly with symmetrical peaks and a flat baseline. Pyridoxamine (PA) and (13)C PA were both observed to show a linear relationship between log ion intensity and quantity from picomole to femtomole amounts by liquid chromatography-electrospray ionization and mass spectrometry. Four independent methods, (i) internal (13)C isotope PA dilution curves, (ii) internal (13)C isotope one-point calibration, (iii) external PA standard curve, and (iv) external (13)C PA standard curve, all agreed within 1 digit in the same order of magnitude on the linear quantification of PA. Hence, a mass spectrometer can be used to robustly detect 526 ymol of the alkaline phosphatase streptavidin probe and accurately quantify zeptomole amounts of PSA against log linear absolute standard by micro electrospray on a simple ion trap. PMID:25259405

  15. 26Al-containing acidic and basic sodium aluminum phosphate preparation and use in studies of oral aluminum bioavailability from foods utilizing 26Al as an aluminum tracer

    NASA Astrophysics Data System (ADS)

    Yokel, Robert A.; Urbas, Aaron A.; Lodder, Robert A.; Selegue, John P.; Florence, Rebecca L.

    2005-04-01

    We synthesized 26Al-containing acidic and basic (alkaline) sodium aluminum phosphates (SALPs) which are FDA-approved leavening and emulsifying agents, respectively, and used them to determine the oral bioavailability of aluminum incorporated in selected foods. We selected applicable methods from published syntheses (patents) and scaled them down (∼3000- and 850-fold) to prepare ∼300-400 mg of each SALP. The 26Al was incorporated at the beginning of the syntheses to maximize 26Al and 27Al equilibration and incorporate the 26Al in the naturally-occurring Al-containing chemical species of the products. Near infrared spectroscopy (NIR) and X-ray powder diffraction (XRD) were used to characterize the two SALP samples and some intermediate samples. Multi-elemental analysis (MEA) was used to determine Na, Al and P content. Commercial products were included for comparison. Satisfactory XRD analyses, near infrared spectra and MEA results confirmed that we synthesized acidic and basic SALP, as well as some of the syntheses intermediates. The 26Al-containing acidic and basic SALPs were incorporated into a biscuit material and a processed cheese, respectively. These were used in oral bioavailability studies conducted in rats in which the 26Al present in blood after its oral absorption was quantified by accelerator mass spectrometry. The results showed oral Al bioavailability from acidic SALP in biscuit was ∼0.02% and from basic SALP in cheese ∼0.05%, lower than our previous determination of Al bioavailability from drinking water, ∼0.3%. Both food and water can appreciably contribute to the Al absorbed from typical human Al intake.

  16. Using a Personal Glucose Meter and Alkaline Phosphatase for Point-of-Care Quantification of Galactose-1-Phosphate Uridyltransferase in Clinical Galactosemia Diagnosis.

    PubMed

    Zhang, Jingjing; Xiang, Yu; Novak, Donna E; Hoganson, George E; Zhu, Junjie; Lu, Yi

    2015-10-01

    The personal glucose meter (PGM) was recently shown to be a general meter to detect many targets. Most studies, however, focus on transforming either target binding or enzymatic activity that cleaves an artificial substrate into the production of glucose. More importantly, almost all reports exhibit their methods by using artificial samples, such as buffers or serum samples spiked with the targets. To expand the technology to even broader targets and to validate its potential in authentic, more complex clinical samples, we herein report expansion of the PGM method by using alkaline phosphatase (ALP) that links the enzymatic activity of galactose-1-phosphate uridyltransferase to the production of glucose, which allows point-of-care galactosemia diagnosis in authentic human clinical samples. Given the presence of ALP in numerous enzymatic assays for clinical diagnostics, the methods demonstrated herein advance the field closer to point-of-care detection of a wide range of targets in real clinical samples. PMID:26350570

  17. Effect of lead fluoride incorporation on the structure and luminescence properties of tungsten sodium phosphate glasses

    NASA Astrophysics Data System (ADS)

    Nardi, Rachel Prado Russo Delorenzo; Braz, Celso Eduardo; de Camargo, Andrea S. S.; Ribeiro, Sidney J. L.; Rocha, Lucas A.; Cassanjes, Fábia Castro; Poirier, Gael

    2015-11-01

    Tungsten phosphate glasses are known to be promising materials for several applications in optics such as non linear optical properties, lower phonon energy or photochromic effects related with tungsten oxide incorporation inside the phosphate network. In this study, lead fluoride has been incorporated in a 60NaPO3-40WO3 glass composition according to the ternary molar compositions (100 - x)[0.6NaPO3-0.4WO3]-xPbF2 with x varying from 0 to 60 mol%. The structural changes as a function of composition were investigated by thermal analysis, UV-visible absorption, Raman spectroscopy, X-ray diffraction of the crystallized samples, and Eu3+ emission in the visible. While DSC analyzes points out a strong decrease in the glass network connectivity and higher crystallization tendency with increasing PbF2 contents, Raman spectra clearly identify a progressive incorporation of PbF2 in the phosphate network with the formation of terminal Psbnd F and Wsbnd F bonds. These results are also in agreement with the crystallization of β-PbF2 observed for the most lead fluoride concentrated samples. Investigation of Eu3+ emission data in the visible showed longer 5D0 excited state lifetime values and higher quantum efficiencies. These results are discussed in terms of the assumption of higher local symmetry around Eu3+ with increasing PbF2 contents.

  18. Vitrification of β-tricalcium phosphate in sodium aluminoborophosphate glass and the effect of Ga3+ substitution

    NASA Astrophysics Data System (ADS)

    Grigg, Andrew T.; Marsden, Alex J.; Mee, Martin; Feller, Steve; Fong, Shirley K.; Mallinson, Phillip M.; Dupree, Ray; Holland, Diane

    2015-11-01

    Sodium calcium aluminoborophosphate glasses (some containing Ga3+) simulate interactions at the interface between β-tricalcium phosphate crystal waste hosts (β-TCP and β-TC(Ga)P) and sodium aluminoborophosphate (NABP) glass encapsulant. 31P NMR and Raman spectroscopies show progression from Na+ charge-balanced, mixed QAlP=Q21+Q30 in the NABP base glass, to Ca2+ charge-balanced, Q00 dominated structure, eventually inhibiting vitrification above 80 wt% addition of β-TCP or β-TC(Ga)P. 27Al NMR shows [Al(PO4)n] species with dominant n=4 and 11B NMR shows the 4-coordinated boron fraction in NABP falls from 0.7 to 0.1 on addition of the crystal hosts. Devitrification of glasses with 60-70 wt% crystal additions shows that Na+ and Al3+ from the encapsulant substitute for ∼20% of Ca2+ in the β-TCP phase formed from the β-TCP:NABP glasses whilst ∼85% of Ga3+ resubstitutes into β-TCP from the β-TC(Ga)P:NABP glasses. This demonstrates the preference for Ga3+ substitution over Al3+ in the Ca(5) site.

  19. Emissions of alkaline elements calcium, magnesium, potassium, and sodium from open sources in the contiguous United States

    SciTech Connect

    Gillette, D.A. ); Stensland, G.J.; Williams, A.L.; Barnard, W.; Gatz, D. ); Sinclair, P.C. ); Johnson, T.C. )

    1992-12-01

    Models of dust emissions by wind erosion (including winds associated with regional activity as well as dust devils) and vehicular disturbances of unpaved roads were developed, calibrated, and used to estimate alkaline dust emissions from elemental soil and road composition data. Emissions from tillage of soils were estimated form the work of previous researchers. The area of maximum dust production by all of those sources is the area of the old Dust Bowl' of the 1930s (the panhandles of Texas and Oklahoma, eastern New Mexico and Colorado, and western Kansas). The areas of maximum alkaline dust production are the arid southwest, the Dust Bowl,' and the midwestern-mideastern states from Iowa to Pennsylvania. Our calculations show that calcium is the dominant alkaline element produced by open sources' (sources too great in extent to be controlled by enclosure or ducting). Although the largest dust mass source is wind erosion (by winds associated with regional activity and convective activity), the largest producer of the alkaline component is road dust because the abundance of alkaline materials in road coverings (which include crushed limestone) is significantly higher than for soils. Comparing the above estimated sources of alkaline material with inventories of SO[sub 2] and NO[sub x] emissions by previous investigators gives the rough approximation that alkaline emission rates are of the order of the SO[sub 2] + NO[sub x] emissions in the western United States and that they are much smaller than SO[sub 2] + NO[sub x] in the eastern United States. This approximation is substantiated by data on Ca/(SO[sub 4] + NO[sub 3]) for wet deposition for National Atmospheric Deposition Program sites. 53 refs., 9 figs., 2 tabs.

  20. Emissions of alkaline elements calcium, magnesium, potassium, and sodium from open sources in the contiguous United States

    NASA Astrophysics Data System (ADS)

    Gillette, Dale A.; Stensland, Gary J.; Williams, Allen L.; Barnard, William; Gatz, Donald; Sinclair, Peter C.; Johnson, Tezz C.

    1992-12-01

    Models of dust emissions by wind erosion (including winds associated with regional activity as well as dust devils) and vehicular disturbances of unpaved roads were developed, calibrated,and used to estimate alkaline dust emissions from elemental soil and road composition data. Emissions from tillage of soils were estimated from the work of previous researchers. The area of maximum dust production by all of those sources is the area of the old "Dust Bowl" of the 1930s (the panhandles of Texas and Oklahoma, eastern New Mexico and Colorado, and western Kansas). The areas of maximum alkaline dust production are the arid southwest, the "Dust Bowl," and the midwestern-mideastern states from Iowa to Pennsylvania. Our calculations show that calcium is the dominant alkaline element produced by "open sources" (sources too great in extent to be controlled by enclosure or ducting). Although the largest dust mass source is wind erosion (by winds associated with regional activity and convective activity), the largest producer of the alkaline component is road dust because the abundance of alkaline materials in road coverings (which include crushed limestone) is significantly higher than for soils. Comparing the above estimated sources of alkaline material with inventories of SO2 and NOx emissions by previous investigators gives the rough approximation that alkaline emission rates are of the order of the SO2 + NOx emissions in the western United States and that they are much smaller than SO2 + NOx in the eastern United States. This approximation is substantiated by data on Ca/(SO4 + NO3) for wet deposition for National Atmospheric Deposition Program sites.

  1. Dependence of the spectral properties of alkaline-free alumino-phosphate glasses on chemical changes during synthesis

    SciTech Connect

    Antonenko, N.I.; Abdrashitova, E.I.; Artomova, M.V.

    1986-07-01

    In order to obtain information about glass microstructure within the first coordination sphere, glasses are irradiated with ionizing radiation. Doses of gamma-radiation not exceeding 10/sup 4/-10/sup 5/ Gy generally produce paramagnetic (PO/sub 4/)/sup 2 -/ radicals and more rarely (PO/sub 3/)/sup 2 -/ in phosphate glasses. This paper shows that in glasses of the same composition structural units of the same composition can exist, but with different chemical bonding depending on the chemical changes occurring during synthesis. Glass samples and batches were irradiated with a Co 60 source at room temperature and the ses were 10/sup 4/ Gy.

  2. Structure and crystallization kinetics of Li2O modified sodium-phosphate glasses

    NASA Astrophysics Data System (ADS)

    Jha, Paramjyot Kumar; Pandey, O. P.; Singh, K.

    2015-08-01

    Glasses of 55P2O5sbnd (45 - x)Na2Osbnd xLi2O; (5 ⩽ x ⩽ 25) are synthesized by melt-quench technique. The amorphous nature of the as-quenched sample is confirmed by X-ray powder diffraction (XRD). The glass transition (Tg) and crystallization temperatures (Tc) are evaluated under non-isothermal conditions using the differential thermal analyzer (DTA). Crystallization kinetic of present glasses is studied using Kissinger's and Augis-Benett models. The activation energies for glass transition (Eg) and crystallization (Ec) increases up to 15 mol% of Li2O and after that decreases. 15 mol% Li2O contained glass exhibits minimum crystallization frequency, which indicates its higher thermodynamic and kinetic stability than other glasses. FTIR and Raman analysis confirmed the higher polymerization of phosphate groups in 15 mol% Li2O glass as compared to other glasses.

  3. Effect of the Food Additives Sodium Citrate and Disodium Phosphate on Shiga Toxin-Producing Escherichia coli and Production of stx-Phages and Shiga toxin.

    PubMed

    Lenzi, Lucas J; Lucchesi, Paula M A; Medico, Lucía; Burgán, Julia; Krüger, Alejandra

    2016-01-01

    Induction and propagation of bacteriophages along the food production chain can represent a significant risk when bacteriophages carry genes for potent toxins. The aim of this study was to evaluate the effect of different compounds used in the food industry on the growth of Shiga toxin-producing Escherichia coli (STEC) and the production of stx-phage particles and Shiga toxin. We tested the in vitro effect of lactic acid, acetic acid, citric acid, disodium phosphate, and sodium citrate on STEC growth. A bacteriostatic effect was observed in most of treated cultures. The exceptions were those treated with sodium citrate and disodium phosphate in which similar growth curves to the untreated control were observed, but with reduced OD600 values. Evaluation of phage production by plaque-based assays showed that cultures treated with sodium citrate and disodium phosphate released phages in similar o lower levels than untreated cultures. However, semi-quantification of Stx revealed higher levels of extracellular Stx in STEC cultures treated with 2.5% sodium citrate than in untreated cultures. Our results reinforce the importance to evaluate if additives and other treatments used to decrease bacterial contamination in food induce stx-phage and Stx production. PMID:27446032

  4. Effect of the Food Additives Sodium Citrate and Disodium Phosphate on Shiga Toxin-Producing Escherichia coli and Production of stx-Phages and Shiga toxin

    PubMed Central

    Lenzi, Lucas J.; Lucchesi, Paula M. A.; Medico, Lucía; Burgán, Julia; Krüger, Alejandra

    2016-01-01

    Induction and propagation of bacteriophages along the food production chain can represent a significant risk when bacteriophages carry genes for potent toxins. The aim of this study was to evaluate the effect of different compounds used in the food industry on the growth of Shiga toxin-producing Escherichia coli (STEC) and the production of stx-phage particles and Shiga toxin. We tested the in vitro effect of lactic acid, acetic acid, citric acid, disodium phosphate, and sodium citrate on STEC growth. A bacteriostatic effect was observed in most of treated cultures. The exceptions were those treated with sodium citrate and disodium phosphate in which similar growth curves to the untreated control were observed, but with reduced OD600 values. Evaluation of phage production by plaque-based assays showed that cultures treated with sodium citrate and disodium phosphate released phages in similar o lower levels than untreated cultures. However, semi-quantification of Stx revealed higher levels of extracellular Stx in STEC cultures treated with 2.5% sodium citrate than in untreated cultures. Our results reinforce the importance to evaluate if additives and other treatments used to decrease bacterial contamination in food induce stx-phage and Stx production. PMID:27446032

  5. High temperature aqueous potassium and sodium phosphate solutions: two-liquid-phase boundaries and critical phenomena, 275-400/sup 0/C; potential applications for steam generators

    SciTech Connect

    Marshall, W.L.

    1981-12-01

    Two-liquid-phase boundaries at temperatures between 275 and 400/sup 0/C were determined for potassium phosphate and sodium phosphate aqueous solutions for compositions from 0 to 60 wt % dissolved salt. The stoichiometric mole ratios, K/PO/sub 4/ or Na/PO/sub 4/, were varied from 1.00 to 2.12 and from 1.00 to 2.16 for the potassium and sodium systems, respectively. Liquid-vapor critical temperatures were also determined for most of the dilute liquid phases that formed. The minimum temperatures (below which a single solution existed) of two-liquid-phase formation were 360/sup 0/C for the potassium system and 279/sup 0/C for the sodium system at mole ratios of 2.00 and 2.16, respectively. For the sodium system at mole ratios greater than 2.16, solids crystallized at lower temperatures as expected from earlier studies. In contrast, potassium solutions that were explored at mole ratios from 2.12 to 3.16 and at temperatures below 360/sup 0/C did not produce solid phases nor liquid-liquid immiscibilities. Aside from the generally unusual observations of two immiscible liquids in an aqueous inorganic salt system, the results could possibly be applied to the use of phosphate additives in steam power generators. 16 refs.

  6. Susceptibility of Mycobacterium avium sbsp paratuberculosis to monensin sodium or tilmicosin phosphate in vitro and resulting infectivity in a murine model.

    PubMed

    Brumbaugh, Gordon W; Simpson, R Bruce; Edwards, John F; Anders, Dwayne R; Thomson, T D

    2004-07-01

    This study was designed to determine the susceptibility in vitro and infectivity of 1 field isolate of Mycobacterium avium sbsp paratuberculosis after exposure to monensin sodium and tilmicosin phosphate. Minimum inhibitory concentrations (0.39 microg monensin sodium/mL; 1.60 microg tilmicosin phosphate/mL) were determined in quintuplicate. Organisms were then incubated with 3 different concentrations of each medication for 3 different lengths of time, then washed and resuspended in sterile physiologic saline and injected intraperitoneally into mice that were genetically susceptible to infection. Mice were euthanatized 50 d later and the number of hepatic granulomas was used as the indicator of infectivity. Neither time of incubation nor concentration of medication had any effect on the infectivity of the organisms. Monensin sodium significantly reduced the number of hepatic granulomas in genetically susceptible mice while tilmicosin phosphate did not. Antimycobacterial activity of monensin sodium suggests that the role of monensin in the control of bovine paratuberculosis should be evaluated further. PMID:15352541

  7. Susceptibility of Mycobacterium avium sbsp paratuberculosis to monensin sodium or tilmicosin phosphate in vitro and resulting infectivity in a murine model

    PubMed Central

    2004-01-01

    Abstract This study was designed to determine the susceptibility in vitro and infectivity of 1 field isolate of Mycobacterium avium sbsp paratuberculosis after exposure to monensin sodium and tilmicosin phosphate. Minimum inhibitory concentrations (0.39 μg monensin sodium/mL; 1.60 μg tilmicosin phosphate/mL) were determined in quintuplicate. Organisms were then incubated with 3 different concentrations of each medication for 3 different lengths of time, then washed and resuspended in sterile physiologic saline and injected intraperitoneally into mice that were genetically susceptible to infection. Mice were euthanatized 50 d later and the number of hepatic granulomas was used as the indicator of infectivity. Neither time of incubation nor concentration of medication had any effect on the infectivity of the organisms. Monensin sodium significantly reduced the number of hepatic granulomas in genetically susceptible mice while tilmicosin phosphate did not. Antimycobacterial activity of monensin sodium suggests that the role of monensin in the control of bovine paratuberculosis should be evaluated further. PMID:15352541

  8. Sensitivity of Listeria monocytogenes Scott A to nisin and diacetyl after starvation in sodium phosphate buffered saline.

    PubMed

    O'Bryan, Corliss A; Sostrin, Michael L; Nannapaneni, Ramakrishna; Ricke, Steven C; Crandall, Philip G; Johnson, Michael G

    2009-01-01

    This study determined the effectiveness of nisin and diacetyl to inhibit the growth of Listeria monocytogenes (Lm) under normal cell cultivation and starvation conditions in sodium phosphate buffered saline (SPBS). Inhibitory effects of nisin at 320 or 1000 AU/mL or diacetyl at 0.25%, 0.50%, or 1.0% and combinations on Lm in brain heart infusion (BHI), SPBS, and potassium phosphate buffered saline (KPBS) were determined on BHIA (nonselective medium) and PALCAM (selective medium) agar at 0 and 2 h posttreatment after 0, 7, 14, and 21 d of starvation. Two-hour exposure to 1000 AU/mL nisin and 1% diacetyl gave 8 to 9 log CFU/mL reductions of nonstarved control cells regardless of plating medium after suspension in BHI, SPBS, or KPBS with inhibitors, but with 7 d starved cells a 2-h exposure reduced Lm levels to less than the detection limit (20 CFU/mL). Cells starved in SPBS for 14 or 21 d then suspended in BHI plus inhibitors were reduced 5 to 6 log CFU/mL. SPBS suspensions on days 14 and 21 were reduced 4 log CFU/mL and 2 to 3 log CFU/mL, respectively, on BHI media and 5 to 6 log CFU/mL and 2 to 3 log CFU/mL on PALCAM. Recovery was the same regardless of plating medium, indicating treated cells were killed and not merely injured by the nisin and diacetyl treatments. This study showed that nisin and diacetyl combinations were more effective on Lm than when either chemical was used separately in BHI, SPBS, or KPBS. Lm cells starved for 14 or more days were much more resistant to the nisin and diacetyl combinations than were nonstarved control cells. PMID:20492120

  9. The sodium-phosphate co-transporter SLC34A2, and pulmonary alveolar microlithiasis: Presentation of an inbred family and a novel truncating mutation in exon 3

    PubMed Central

    Vismara, Marco Favio Michele; Colao, Emma; Fabiani, Fernanda; Bombardiere, Francesco; Tamburrini, Oscar; Alessio, Caterina; Manti, Francesco; Pelaia, Gerolamo; Romeo, Pasquale; Iuliano, Rodolfo; Perrotti, Nicola

    2015-01-01

    Pulmonary alveolar microlithiasis is a disorder in which many tiny fragments (microliths) of calcium phosphate gradually accumulate in alveoli. Loss of function mutations in the gene SLC34A2 coding for the sodium phosphate co-transporter (NaPi-IIb) are responsible for genetic forms of alveolar microlithiasis. We now report a consanguineous Italian family from Calabria with two affected members segregating alveolar microlithiasis in a recessive fashion. We describe, for the first time, a novel loss of function mutation in the gene coding for NaPi-IIb. A careful description of the clinical phenotype is provided together with technical details for direct sequencing of the gene. PMID:26744662

  10. Sodium-dependent uptake of inorganic phosphate by the intracellular malaria parasite

    NASA Astrophysics Data System (ADS)

    Saliba, Kevin J.; Martin, Rowena E.; Bröer, Angelika; Henry, Roselani I.; Siobhan McCarthy, C.; Downie, Megan J.; Allen, Richard J. W.; Mullin, Kylie A.; McFadden, Geoffrey I.; Bröer, Stefan; Kirk, Kiaran

    2006-10-01

    As the malaria parasite, Plasmodium falciparum, grows within its host erythrocyte it induces an increase in the permeability of the erythrocyte membrane to a range of low-molecular-mass solutes, including Na+ and K+ (ref. 1). This results in a progressive increase in the concentration of Na+ in the erythrocyte cytosol. The parasite cytosol has a relatively low Na+ concentration and there is therefore a large inward Na+ gradient across the parasite plasma membrane. Here we show that the parasite exploits the Na+ electrochemical gradient to energize the uptake of inorganic phosphate (Pi), an essential nutrient. Pi was taken up into the intracellular parasite by a Na+-dependent transporter, with a stoichiometry of 2Na+:1Pi and with an apparent preference for the monovalent over the divalent form of Pi. A Pi transporter (PfPiT) belonging to the PiT family was cloned from the parasite and localized to the parasite surface. Expression of PfPiT in Xenopus oocytes resulted in Na+-dependent Pi uptake with characteristics similar to those observed for Pi uptake in the parasite. This study provides new insight into the significance of the malaria-parasite-induced alteration of the ionic composition of its host cell.

  11. Synthesis, and crystal and electronic structure of sodium metal phosphate for use as a hybrid capacitor in non-aqueous electrolyte.

    PubMed

    Sundaram, Manickam Minakshi; Watcharatharapong, Teeraphat; Chakraborty, Sudip; Ahuja, Rajeev; Duraisamy, Shanmughasundaram; Rao, Penki Tirupathi; Munichandraiah, Nookala

    2015-12-14

    Energy storage devices based on sodium have been considered as an alternative to traditional lithium based systems because of the natural abundance, cost effectiveness and low environmental impact of sodium. Their synthesis, and crystal and electronic properties have been discussed, because of the importance of electronic conductivity in supercapacitors for high rate applications. The density of states of a mixed sodium transition metal phosphate (maricite, NaMn(1/3)Co(1/3)Ni(1/3)PO4) has been determined with the ab initio generalized gradient approximation (GGA)+Hubbard term (U) method. The computed results for the mixed maricite are compared with the band gap of the parent NaFePO4 and the electrochemical experimental results are in good agreement. A mixed sodium transition metal phosphate served as an active electrode material for a hybrid supercapacitor. The hybrid device (maricite versus carbon) in a non-aqueous electrolyte shows redox peaks in the cyclic voltammograms and asymmetric profiles in the charge-discharge curves while exhibiting a specific capacitance of 40 F g(-1) and these processes are found to be quasi-reversible. After long term cycling, the device exhibits excellent capacity retention (95%) and coulombic efficiency (92%). The presence of carbon and the nanocomposite morphology, identified through X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) studies, ensures the high rate capability while offering possibilities to develop new cathode materials for sodium hybrid devices. PMID:26530639

  12. Inorganic polymeric phosphate/polyphosphate as an inducer of alkaline phosphatase and a modulator of intracellular Ca2+ level in osteoblasts (SaOS-2 cells) in vitro.

    PubMed

    Müller, Werner E G; Wang, Xiaohong; Diehl-Seifert, Bärbel; Kropf, Klaus; Schlossmacher, Ute; Lieberwirth, Ingo; Glasser, Gunnar; Wiens, Matthias; Schröder, Heinz C

    2011-06-01

    Inorganic polymeric phosphate is a physiological polymer that accumulates in bone cells. In the present study osteoblast-like SaOS-2 cells were exposed to this polymer, complexed in a 2:1 stoichiometric ratio with Ca(2+), polyP (Ca(2+) salt). At a concentration of 100 μM, polyP (Ca(2+) salt) caused a strong increase in the activity of the alkaline phosphatase and also an induction of the steady-state expression of the gene encoding this enzyme. Comparative experiments showed that polyP (Ca(2+) salt) can efficiently replace β-glycerophosphate in the in vitro hydroxyapatite (HA) biomineralization assay. In the presence of polyP (Ca(2+) salt) the cells extensively form HA crystallites, which remain intimately associated with or covered by the plasma membrane. Only the tips of the crystallites are directly exposed to the extracellular space. Element mapping by scanning electron microscopy/energy-dispersive X-ray spectroscopy coupled to a silicon drift detector supported the finding that organic material was dispersed within the crystallites. Finally, polyP (Ca(2+) salt) was found to cause an increase in the intracellular Ca(2+) level, while polyP, as well as inorganic phosphate (P(i)) or Ca(2+) alone, had no effect at the concentrations used. These findings are compatible with the assumption that polyP (Ca(2+) salt) is locally, on the surface of the SaOS-2 cells, hydrolyzed to P(i) and Ca(2+). We conclude that the inorganic polymer polyP (Ca(2+) salt) in concert with a second inorganic, and physiologically occurring, polymer, biosilica, activates osteoblasts and impairs the maturation of osteoclasts. PMID:21397057

  13. Reversed micellar solution-to-bicontinuous microemulsion transition in sodium bis(2-ethylhexyl) phosphate/n-heptane/water system

    SciTech Connect

    Yu, Z.J.; Neuman, R.D.

    1995-04-01

    The solution structures in the three-component system sodium bis(2-ethylhexyl) phosphate (NaDEHP)/n-heptane/water have been investigated by dynamic and static light-scattering, electrical conductivity, and {sup 31}P-NMR spectroscopic and viscometric measurements. A transition in the physicochemical properties was observed over a rather narrow range of W{sub o} (molar ratio of water to NaDEHP) values. Rodlike reversed micelles and swollen rodlike reversed micelles form when W{sub o}< 4. Beyond this W{sub o} range, phase separation occurs at low NaDEHP concentrations, and homogeneous one-phase microemulsions form at high NaDEHP concentrations. It is suggested that the n-heptane-continuous solution of water-swollen reversed micelles transforms to a bicontinuous microemulsion when W{sub o} increases beyond W{sub o} {approx} 4. The bicontinuous microemulsion region ranges between two local viscosity maxima at W{sub o}{approx} 4 and W{sub o}{approx} 100, and an oil-in-water (O/W) microemulsion exists when W{sub o}> 100. Local dynamic domain structures consistent with the bicontinuous microemulsion behaviors are proposed and discussed. 29 refs., 7 figs., 1 tab.

  14. Structural and luminescence studies of Ho{sup 3+}-doped zinc-aluminium-sodium-phosphate (ZANP) glasses

    SciTech Connect

    Brahmachary, K.; Rajesh, D.; Ratnakaram, Y. C.

    2015-06-24

    Trivalent holmium doped zinc-aluminium-sodium-phosphate (ZANP) glasses were prepared by conventional melt-quenching technique and characterized for their structural and luminescence properties. The amorphous nature, elemental analysis and thermal stability of the glasses were studied by using X-ray diffraction, energy dispersive spectrum and differential scanning calorimetry analysis, respectively. The absorption and fluorescence spectra have been recorded at room temperature. Based on the absorption spectra, the Judd-Ofelt parameters and radiative parameters such as spontaneous transition probabilities (A{sub R}), branching ratios (β{sub R}), radiative lifetimes (τ{sub R}) were calculated and discussed. From the emission spectra emission peak positions (λ{sub P}), effective bandwidths (Δλ{sub eff}) and stimulated emission cross-sections (σ{sub P}) were calculated for the observed emission transitions,{sup 5}S{sub 2} ({sup 5}F{sub 4}→{sup 5}I{sub 8}) and {sup 5}F{sub 5}→{sup 5}I{sub 8} in all the glass samples. The stimulated emission cross-section is higher for ZANPHo10 glass matrix and so it may be useful for laser excitation.

  15. Pharmacokinetics of intra-articular betamethasone sodium phosphate and betamethasone acetate and endogenous hydrocortisone suppression in exercising horses.

    PubMed

    Menendez, M I; Phelps, M A; Bertone, A L

    2016-02-01

    To the date, no reports exist of the pharmacokinetics (PK) of betamethasone (BTM) sodium phosphate and betamethasone acetate administered intra-articular (IA) into multiple joints in exercising horses. The purpose of the study was to determine the PK of BTM and HYD concentrations in plasma and urine after IA administration of a total of 30 mg BTM. Eight 4 years old Thoroughbred mares were exercised on a treadmill and BTM was administered IA. Plasma and urine BTM and HYD were determined via high performance liquid chromatography spectrometry for 6 weeks. Concentration-time profiles of BTM and HYD in plasma and urine were used to generate PK estimates for non-compartmental analyses and comparisons among times and HYD concentrations. BTM in plasma had greater Tmax (Tmax 0.8 h) vs. urine (Tmax 7.1 h). Urine BTM concentration (ng/mL) and amount (AUClast ; h × ng/mL) were greater than plasma. HYD was suppressed for at least 3 days (<1 ng/mL) for all horses. The time of last quantifiable concentration of BTM (Tlast ; hour) was not significantly different in plasma than urine. Use of highly sensitive HPLC-MS/MS assays enabled early detection and prolonged and consistent determination of BTM in plasma and urine. PMID:25847081

  16. Improvement in lipids extraction processes for biodiesel production from wet microalgal pellets grown on diammonium phosphate and sodium bicarbonate combinations.

    PubMed

    Shah, Syed Hasnain; Raja, Iftikhar Ahmed; Mahmood, Qaisar; Pervez, Arshid

    2016-08-01

    Biomass productivity and growth kinetics for microalgae grown on sodium bicarbonate and diammonium phosphate were investigated. Different carbon and nitrogen ratios have shown different growth rates and biomass productivity and C:N ratio 50:10 as mgL(-1) has shown the best production than all. For effective lipids extraction from biomass thermolysis and sonolysis were carried out from wet biomass. Sonolysis at 2.3W intensity for 5min has released 8.58mg at neutral pH. More quantity of lipids was extracted when extraction was made at pH 4 and 10 which resulted 9mg and 9.28mg lipids respectively. Thermal treatment at 100°C for 10min has released 12.82mg lipid at neutral pH. In the same thermolysis at pH 4 and 10 more quantity of lipids was extracted which were 15.16mg and 14.81mg respectively. Finally transesterified lipids were analyzed through GC-MS for FAME composition analysis. PMID:27132228

  17. FTIR and Mössbauer spectroscopic study of sodium-aluminum-iron phosphate glassy materials for high level waste immobilization

    NASA Astrophysics Data System (ADS)

    Stefanovsky, S. V.; Stefanovsky, O. I.; Remizov, M. B.; Belanova, E. A.; Kozlov, P. V.; Glazkova, Ya. S.; Sobolev, A. V.; Presniakov, I. A.; Kalmykov, S. N.; Myasoedov, B. F.

    2015-11-01

    Complex sodium-aluminum-iron phosphate glassy materials with various Al2O3 to Fe2O3 ratio containing high level waste (HLW) surrogate were characterized by X-ray diffraction and scanning electron microscopy and studied in details by Fourier transform infrared (FTIR) spectroscopy. The samples with high Al2O3 content and not containing Fe2O3 were predominantly amorphous but subjected to devitrification under annealing. Addition of B2O3 and partial Fe2O3 substitution for Al2O3 in the materials increases their resistance to devitrification whereas further substitution and NiO incorporation significantly increase the tendency to devitrification. FTIR spectra demonstrate changes in the structure of glassy materials caused by both structural variations in the anionic motif and occurrence of crystalline phases in the materials. According to Mössbauer spectroscopy data, iron in the glassy samples is present as octahedrally coordinated Fe3+ ions while in the partly devitrified samples iron is partitioned among vitreous and crystalline phases entering the vitreous phase mainly as Fe3+O6 units and crystalline phases as major Fe3+ and minor Fe2+ ions in a magnetically ordered state and participating in a "fast" electronic exchange.

  18. Comparative study of layer-by-layer deposition techniques for poly(sodium phosphate) and poly(allylamine hydrochloride)

    PubMed Central

    2013-01-01

    An inorganic short chain polymer, poly(sodium phosphate), PSP, together with poly(allylamine hydrochloride), PAH, is used to fabricate layer-by-layer (LbL) films. The thickness, roughness, contact angle, and optical transmittance of these films are studied depending on three parameters: the precursor solution concentrations (10-3 and 10-4 M), the number of bilayers deposited (20, 40, 60, 80, and 100 bilayers), and the specific technique used for the LbL fabrication (dipping or spraying). In most cases of this experimental study, the roughness of the nanofilms increases with the number of bilayers. This contradicts the basic observations made in standard LbL assemblies where the roughness decreases for thicker coatings. In fact, a wide range of thickness and roughness was achieved by means of adjusting the three parameters mentioned above. For instance, a roughness of 1.23 or 205 nm root mean square was measured for 100 bilayer coatings. Contact angles close to 0 were observed. Moreover, high optical transmittance is also reported, above 90%, for 80 bilayer films fabricated with the 10-4 M solutions. Therefore, these multilayer structures can be used to obtain transparent superhydrophilic surfaces. PMID:24359137

  19. Adaptation of epithelial sodium-dependent phosphate transport in jejunum and kidney of hens to variations in dietary phosphorus intake.

    PubMed

    Huber, K; Hempel, R; Rodehutscord, M

    2006-11-01

    The objective of this study was to explore the homeostatic response of jejunal and renal epithelia regarding the inorganic phosphate (P(i)) transport capacities to variations in dietary total phosphorus (tP) supply in hens. Adaptive processes were determined by quantitative measures of intake and excretion, P(i) transport studies across brush border membranes, and semiquantitative detection of sodium-dependent phosphate transporters (NaPi II) based on mRNA expression in the jejunum and kidney. Twelve hens (4/group) were adapted to 3 tP feeding levels in a pair-fed manner (60 g/d): low P diet with 0.073% tP, medium P diet with 0.204% tP, and high P diet with 0.343% tP. Excretion was measured during the last 5 d of a 16-d feeding period. After slaughtering, jejunal mucosa and renal cortex were removed. Tissues were used for (32)P uptake studies in brush-border membrane vesicles by rapid filtration technique and NaPi II mRNA expression studies by northern analyses. Plasma P(i) concentrations were additionally measured. The NaPi II transporter mRNA could specifically be detected in chicken jejunum and kidney. Functional parameters of Na(+)-dependent P(i) transport indicated that these transporters were involved in chicken P(i) transport across the apical membranes of jejunal and renal epithelia. Increased tP intake resulted in an increased overall tP excretion. Correlating individual data from all animals by linear regression highlighted that the adaptive decrease of renal P(i) transport capacity and NaPi IIa mRNA expression was associated with an increase in plasma P(i) levels and resulted in a higher tP excretion. Jejunal P(i) transport capacity and NaPi IIb mRNA expression did not react to variations in dietary tP supply. In conclusion, the homeostatic response was mainly based on the adaptive capacity of the kidney in hens. PMID:17032833

  20. Copper Catalyzed Sodium Tetraphenylborate, Triphenylborane, Diphenylborinic Acid and Phenylboronic Acid Decomposition Kinetic Studies in Aqueous Alkaline Solutions

    SciTech Connect

    Crawford, C.L.

    1999-03-15

    This work studied the kinetics of copper-catalyzed decomposition of tetraphenylborate, triphenylborane, diphenylborinic acid and phenylboronic acid (NaTPB, 3PB, 2PB and 1PB, respectively) in aqueous alkaline solution over the temperature range of 25 to 70 degrees C. The statistically designed test matrices added copper sulfate to maximum concentrations of 10 mg/L. The relative rates of decomposition increase in the order of NaTPB < 1PB {tilde} 3PB < 2PB. Dependence of decomposition on the amount of added copper increases in the order of 3PB {tilde} 2PB < 1PB {tilde} NaTPB. Activation energies ranged from 82 to 143 kJ/mole over the temperature range studied. Final decomposition products predominately involved benzene and phenol. All 3PB, 2PB and 1PB intermediate phenylborate species proved relatively stable (< 8 percent decomposition over {tilde} 500 h) towards thermal hydrolysis in 1.5 M NaOH when contained in carbon-steel vessels sealed under air at ambient temperature (23 - 25 degrees C) with no added copper. Measurable (> 10-7 Mh-1) thermal hydrolysis of the phenylborate species occurs at 55 to 70 degrees C in alkaline (0.6-2.3 M OH-, 2-4.7 M Na+) solution with no added copper. The experiments suggest an important role for oxygen in copper-catalyzed phenylborate decomposition. NaTPB decomposes promptly under anoxic conditions while 3PB, 2PB and 1PB decompose faster in aerobic solutions. Benzene and phenol form as the predominant end-products from alkaline copper catalysis in static systems sealed under air. Both 2PB and 1PB decompose with near equal rates and quantitatively produce phenol under flowing air-purge conditions at 25 to 60 degrees C. Mechanisms for copper-catalyzed phenylborate decomposition likely involve a redox process giving loss of a phenyl group from the phenylborate with reduction of cupric ion, or dephenylation by reduced cuprous ion involving a phenylated copper intermediate.

  1. Chronic (89-week) feeding study with hydroxypropyl distarch phosphate, starch acetate, lactose and sodium alginate in mice.

    PubMed

    Til, H P; Feron, V J; Immel, H R; Vogel, W F

    1986-08-01

    A chronic feeding study was carried out in mice with two chemically modified potato starches, hydroxypropyl distarch phosphate (HP-starch) and starch acetate (AC-starch), and with lactose and sodium alginate. Each of the materials was fed to a group of 75 male and 75 female mice for 89 wk. The dietary level of the test products was gradually increased until the diets contained (by weight) 55% HP-starch, 55% AC-starch, 55% lactose or 25% alginate. The control diet contained 55% pregelatinized potato starch. Each of the four test materials caused increased water consumption, distinct caecal and colonic enlargement, a slightly increased incidence of intratubular nephrosis and, with the exception of AC-starch, also slightly lower body weights. An increased incidence of gastric trichobezoars was observed in mice fed either the modified starches or lactose. The occurrence of concrements in the renal pelvis along with slight urinary changes, such as increased amounts of amorphous material in the urine and increased urinary Ca content, in mice fed HP-starch, AC-starch or lactose was regarded as an effect of little, if any, toxicological significance. Alginate fed at 25% (w/w) of the diet was nephrotoxic to mice, as shown by extremely high water consumption, high urine production, urinary incontinence, high pH and low specific gravity of the urine, increased level of blood urea nitrogen, increased kidney weights, distension of the renal calyx and the high incidence of dilated distal tubules. Caecal and colonic enlargement and changes in urinalysis were found to be reversible and had completely or largely disappeared within 2-5 wk of the cessation of the treatment in wk 87. The incidence of intratubular calcinosis or of concrements in the pelvic space was not reduced during the recovery period. The study did not provide any evidence of carcinogenicity of the products tested. PMID:2430873

  2. PHOSPHATE MANAGEMENT: FY2010 RESULTS OF PHOSPHATE PRECIPITATION TESTS

    SciTech Connect

    Hay, M.; King, W.

    2011-04-04

    The Phosphate Management program seeks to develop treatment options for caustic phosphate solutions resulting from the caustic leaching of the bismuth phosphate sludge. The SRNL subtask investigated the precipitation of phosphate salts from caustic solutions through addition of fluoride and by crystallization. The scoping tests examined the: precipitation of phosphate by the addition of sodium fluoride to form the sodium fluorophosphate double salt, Na{sub 7}F(PO{sub 4}){sub 2} {center_dot} 19H{sub 2}O, crystallization of phosphate by reducing the temperature of saturated phosphate solutions, and combinations of precipitation and crystallization. A simplified leachate simulant was used in the study produced by dissolving sodium phosphate in 1 M to 3.5 M sodium hydroxide solutions. The results show that all three processes; precipitation with sodium fluoride, crystallization, and combined precipitation/crystallization can be effective for removing large amounts of phosphate from solution. The combined process of precipitation/crystallization showed >90% removal of phosphate at all hydroxide concentrations when cooling a non-saturated phosphate solution from 65 C to 25 C. Based on the measured solubility of sodium phosphate, pH adjustment/caustic addition will also remove large amounts of phosphate from solution (>80%). For all three processes, the phosphate concentration in the caustic solution must be managed to keep the phosphate from becoming too concentrated and thereby potentially forming a solid mass of sodium phosphate after an effective phosphate removal process.

  3. Common Variants at Putative Regulatory Sites of the Tissue Nonspecific Alkaline Phosphatase Gene Influence Circulating Pyridoxal 5′-Phosphate Concentration in Healthy Adults123

    PubMed Central

    Carter, Tonia C; Pangilinan, Faith; Molloy, Anne M; Fan, Ruzong; Wang, Yifan; Shane, Barry; Gibney, Eileen R; Midttun, Øivind; Ueland, Per M; Cropp, Cheryl D; Kim, Yoonhee; Wilson, Alexander F; Bailey-Wilson, Joan E; Brody, Lawrence C; Mills, James L

    2015-01-01

    Background: Vitamin B-6 interconversion enzymes are important for supplying pyridoxal 5′-phosphate (PLP), the co-enzyme form, to tissues. Variants in the genes for these enzymes [tissue nonspecific alkaline phosphatase (ALPL), pyridoxamine 5′-phosphate oxidase, pyridoxal kinase, and pyridoxal phosphatase] could affect enzyme function and vitamin B-6 status. Objectives: We tested whether single-nucleotide polymorphisms (SNPs) in these genes influence vitamin B-6 status markers [plasma PLP, pyridoxal (PL), and 4-pyridoxic acid (PA)], and explored potential functional effects of the SNPs. Methods: Study subjects were young, healthy adults from Ireland (n = 2345). We measured plasma PLP, PL, and PA with liquid chromatography–tandem mass spectrometry and genotyped 66 tag SNPs in the 4 genes. We tested for associations with single SNPs in candidate genes and also performed genome-wide association study (GWAS) and gene-based analyses. Results: Seventeen SNPs in ALPL were associated with altered plasma PLP in candidate gene analyses (P < 1.89 × 10−4). In the GWAS, 5 additional ALPL SNPs were associated with altered plasma PLP (P < 5.0 × 10−8). Gene-based analyses that used the functional linear model β-spline (P = 4.04 × 10−15) and Fourier spline (P = 5.87 × 10−15) methods also showed associations between ALPL and altered plasma PLP. No SNPs in other genes were associated with plasma PLP. The association of the minor CC genotype of 1 ALPL SNP, rs1256341, with reduced ALPL expression in the HapMap Northern European ancestry population is consistent with the positive association between the CC genotype and plasma PLP in our study (P = 0.008). No SNP was associated with altered plasma PL or PA. Conclusions: In healthy adults, common variants in ALPL influence plasma PLP concentration, the most frequently used biomarker for vitamin B-6 status. Whether these associations are indicative of functional changes in vitamin B-6 status requires more investigation

  4. Fluoxetine induces alkalinization of astroglial cytosol through stimulation of sodium-hydrogen exchanger 1: dissection of intracellular signaling pathways

    PubMed Central

    Ren, Jienan; Song, Dan; Bai, Qiufang; Verkhratsky, Alexei; Peng, Liang

    2015-01-01

    Clinical evidence suggest astrocytic abnormality in major depression (MD) while treatment with anti-psychotic drugs affects astroglial functions. Astroglial cells are involved in pH homeostasis of the brain by transporting protons (through sodium-proton transporter 1, NHE1, glutamate transporters EAAT1/2 and proton-lactate co-transporter MCT1) and bicarbonate (through the sodium-bicarbonate co-transporter NBC or the chloride-bicarbonate exchanger AE). Here we show that chronic treatment with fluoxetine increases astroglial pHi by stimulating NHE1-mediated proton extrusion. At a clinically relevant concentration of 1 μM, fluoxetine significantly increased astroglial pHi from 7.05 to 7.34 after 3 weeks and from 7.18 to 7.58 after 4 weeks of drug treatment. Stimulation of NHE1 is a result of transporter phosphorylation mediated by several intracellular signaling cascades that include MAPK/ERK1/2, PI3K/AKT and ribosomal S6 kinase (RSK). Fluoxetine stimulated phosphorylation of ERK1/2, AKT and RSK in a concentration dependent manner. Positive crosstalk exists between two signal pathways, MAPK/ERK1/2 and PI3K/AKT activated by fluoxetine since ERK1/2 phosphrylation could be abolished by inhibitors of PI3K, LY294002 and AKT, triciribine, and AKT phosphorylation by inhibitor of MAPK, U0126. As a result, RSK phosphorylation was not only inhibited by U0126 but also by inhibitor of LY294002. The NHE1 phoshorylation resulted in stimulation of NHE1 activity as revealed by the NH4Cl-prepulse technique; the increase of NHE1 activity was dependent on fluoxetine concentration, and could be inhibited by both U0126 and LY294002. Our findings suggest that regulation of astrocytic pHi and brain pH may be one of the mechanisms underlying fluoxetine action. PMID:25784857

  5. [DNA degradation during standard alkaline of thermal denaturation].

    PubMed

    Drozhdeniuk, A P; Sulimova, G E; Vaniushin, B F

    1976-01-01

    Essential degradation 8 DNA (up to 10 per cent) with liberation of acid-soluble fragments takes place on the standard alkaline (0,01 M sodium phosphate, pH 12, 60 degrees, 15 min) or thermal (0.06 M sodium phosphate buffer, pH 6.8, 102 degrees C, 15 min) denaturation. This degradation is more or less selective: fraction of low molecular weight fragments, isolated by hydroxyapatite cromatography and eluted by 0.06 M sodium phosphate buffer, pH 6.8 is rich in adenine and thymine and contains about 2 times less 5-methylcytosine than the total wheat germ DNA. The degree of degradation of DNA on thermal denaturation is higher than on alkaline degradation. Therefore while studying reassociation of various DNA, one and the same standard method of DNA denaturation should be used. Besides, both the level of DNA degradation and the nature of the resulting products (fragments) should be taken into account. PMID:999984

  6. Sodium Phosphate Rectal

    MedlinePlus

    ... It works by drawing water into the large intestine to produce a soft bowel movement. ... a blockage or tear in your stomach or intestine, inflammatory bowel disease (IBD; a group of conditions ...

  7. Sodium Phosphate Rectal

    MedlinePlus

    ... blockers (ARBs) such as candesartan (Atacand, in Atacand HCT), eprosartan (Teveten), irbesartan (Avapro, in Avalide), losartan (Cozaar, ... Benicar, in Azor, Tribenzor), telmisartan (Micardis, in Micardis HCT, Twynsta), or valsartan (Diovan, in Diovan HCT, Exforge, ...

  8. Scaling effects in sodium zirconium silicate phosphate (Na1+xZr2SixP3-xO12) ion-conducting thin films

    DOE PAGESBeta

    Ihlefeld, Jon F.; Gurniak, Emily; Jones, Brad H.; Wheeler, David R.; Rodriguez, Mark A.; McDaniel, Anthony H.

    2016-05-04

    Preparation of sodium zirconium silicate phosphate (NaSICon), Na1+xZr2SixP3–xO12 (0.25 ≤ x ≤ 1.0), thin films has been investigated via a chemical solution approach on platinized silicon substrates. Increasing the silicon content resulted in a reduction in the crystallite size and a reduction in the measured ionic conductivity. Processing temperature was also found to affect microstructure and ionic conductivity with higher processing temperatures resulting in larger crystallite sizes and higher ionic conductivities. The highest room temperature sodium ion conductivity was measured for an x = 0.25 composition at 2.3 × 10–5 S/cm. In conclusion, the decreasing ionic conductivity trends with increasingmore » silicon content and decreasing processing temperature are consistent with grain boundary and defect scattering of conducting ions.« less

  9. Effects of Silicate, Phosphate, and Calcium on the Stability of Aldopentoses

    NASA Astrophysics Data System (ADS)

    Nitta, Sakiko; Furukawa, Yoshihiro; Kakegawa, Takeshi

    2016-06-01

    Ribose is an important constituent of RNA: ribose connects RNA bases and forms a strand of sugar phosphates. Accumulation of ribose on prebiotic Earth was difficult because of its low stability. Improvement in the yield of ribose by the introduction of borate or silicate in a formose-like reaction has been proposed. The effects of borates have been further analyzed and confirmed in subsequent studies. Nonetheless, the effects of silicates and phosphates remain unclear. In the present study, we incubated aldopentoses in a highly alkaline aqueous solution at a moderate temperature to determine the effects of silicate or phosphate on the degradation rates of ribose and its isomeric aldopentoses. The formation of a complex of silicate (or phosphate) with ribose was also analyzed in experiments with 29Si and 31P nuclear magnetic resonance (NMR). We found that silicate or phosphate complexes of ribose were not detectable under our experimental conditions. The stability of ribose and lyxose improved after addition of 40-fold molar excess (relative to a pentose) of sodium silicate or sodium phosphate to the alkaline solution. The stability was not improved further when an 80-fold molar excess of sodium silicate or sodium phosphate was added. Calcium was removed from these solutions by precipitation of calcium salts. The drop in Ca2+ concentration might have improved the stability of ribose and lyxose, which are susceptible to aldol addition. The improvement of ribose stability by the removal of Ca2+ and by addition of silicate or phosphate was far smaller than the improvement by borate. Furthermore, all aldopentoses showed similar stability in silicate- and phosphate-containing solutions. These results clearly show that selective stabilization of ribose by borate cannot be replaced by the effects of silicate or phosphate; this finding points to the importance of borate in prebiotic RNA formation.

  10. Effects of Silicate, Phosphate, and Calcium on the Stability of Aldopentoses.

    PubMed

    Nitta, Sakiko; Furukawa, Yoshihiro; Kakegawa, Takeshi

    2016-06-01

    Ribose is an important constituent of RNA: ribose connects RNA bases and forms a strand of sugar phosphates. Accumulation of ribose on prebiotic Earth was difficult because of its low stability. Improvement in the yield of ribose by the introduction of borate or silicate in a formose-like reaction has been proposed. The effects of borates have been further analyzed and confirmed in subsequent studies. Nonetheless, the effects of silicates and phosphates remain unclear. In the present study, we incubated aldopentoses in a highly alkaline aqueous solution at a moderate temperature to determine the effects of silicate or phosphate on the degradation rates of ribose and its isomeric aldopentoses. The formation of a complex of silicate (or phosphate) with ribose was also analyzed in experiments with (29)Si and (31)P nuclear magnetic resonance (NMR). We found that silicate or phosphate complexes of ribose were not detectable under our experimental conditions. The stability of ribose and lyxose improved after addition of 40-fold molar excess (relative to a pentose) of sodium silicate or sodium phosphate to the alkaline solution. The stability was not improved further when an 80-fold molar excess of sodium silicate or sodium phosphate was added. Calcium was removed from these solutions by precipitation of calcium salts. The drop in Ca(2+) concentration might have improved the stability of ribose and lyxose, which are susceptible to aldol addition. The improvement of ribose stability by the removal of Ca(2+) and by addition of silicate or phosphate was far smaller than the improvement by borate. Furthermore, all aldopentoses showed similar stability in silicate- and phosphate-containing solutions. These results clearly show that selective stabilization of ribose by borate cannot be replaced by the effects of silicate or phosphate; this finding points to the importance of borate in prebiotic RNA formation. PMID:26559965

  11. Spectrophotometric determination of copper in alkaline solutions and evaluation of some hydroxy-substituted 1,10-phenanthrolines as chromogenic reagents.

    PubMed

    Dunbar, W E; Schilt, A A

    1972-09-01

    Seven new hydroxy-substituted 1,10-phenanthroline derivatives have been evaluated as chromogenic reagents for the determination of copper in strongly alkaline solution. The most sensitive of these, 2,9-dimethyl-4,7-dihydroxy-1,10-phenanthroline, has proven to be highly effective in a simple, rapid procedure for determining trace amounts of copper in sodium hydroxide, potassium carbonate, sodium phosphate or ammonium hydroxide. PMID:18961151

  12. Influence of pH, concentration of sodium lactate as an additive and ultrasonic treatment on synthesis of zinc phosphate white pigments.

    PubMed

    Onoda, H; Haruki, M; Toyama, T

    2014-08-01

    Zinc oxide that has the photocatalytic activity is used as a white pigment for cosmetics. A certain degree of sebum on the skin is decomposed by the ultraviolet radiation in sunlight. In this work, zinc phosphates were prepared from zinc nitrate and phosphoric acid at pH 5 and 7 with and without the addition of sodium lactate and ultrasonic treatment as a novel white pigment for use in cosmetics. The chemical composition, powder properties, photocatalytic activity, colour phase, moisture retention and smoothness of the zinc phosphates were studied. The obtained materials had a Zn/P ratio of about 1.5, which corresponds to zinc orthophosphate Zn3 (PO4 )2 . Samples prepared with ultrasonic treatment indicated the high ratios of large particles in scanning electron microscopy images and particle-size distributions. The photocatalytic activity of these zinc phosphate particles was too less to protect the sebum on the skin. The materials obtained and their thermal products at 100°C showed a high reflectance within the range of visible light. The slipping resistance and roughness of the powder were enough low for use in cosmetics. PMID:24749906

  13. Safety and efficacy of aspartame-based liquid versus sucrose-based liquids used for dilution in oral sodium phosphate solutions for colonoscopy preparations.

    PubMed

    Chamberlain, Sherman M; Balart, J Carter; Sideridis, Kostas; Salek, Jefrey; Sridhar, Subbaramiah; Thompson, William O

    2007-11-01

    The aim of this study was to investigate whether an oral sodium phosphate solution (OSPS) mixed with aspartame-based clear liquids as the diluent would yield improved colon cleansing results compared to an OSPS mixed with sucrose-based liquids as the diluent. Fifty-one patients undergoing colonoscopy were prospectively randomized into two groups to receive different OSPS colonoscopy preparations, with sucrose-based or aspartame-based liquids used as diluents. The primary end point was the quality of the colonoscopy preparation and secondary end points were serum electrolytes before and after preparations. No significant difference in colonoscopy preparation quality was seen between the two OSPS diluent groups (Mantel-Haenzel chi (2) = 0.795, P = 0.484). There were no significant differences in mean electrolyte shifts of sodium, potassium, blood urea nitrogen (BUN), creatinine (Cr), or BUN/Cr ratios between the two groups. There was a statistically significant increase in serum phosphorous in the aspartame-based group compared to the sucrose-based diluent group (P = 0.021). In conclusion, there was no clinically detectable difference in colonoscopy preparation quality between the two OSPS diluent groups. This study suggests that passive fluid transport by aquaporins may well be the major mediator of fluid shifts in the study subjects. This result suggests the potential importance of aquaporins and minimizes the importance of sodium glucose cotransporter SGLT1 in fluid and electrolyte transport in the human gastrointestinal tract. Aspartame or its constituent amino acids may enhance phosphate absorption across the human small intestine. PMID:17406813

  14. The effect of casein phosphopeptide-amorphous calcium phosphate paste and sodium fluoride mouthwash on the prevention of dentine erosion: An in vitro study

    PubMed Central

    Moezizadeh, Maryam; Alimi, Azar

    2014-01-01

    Aim: The purpose was to compare the effect of 0.2% sodium fluoride mouthwash and casein phosphopeptide-amorphous calcium phosphate paste on prevention of dentin erosion. Materials and Methods: Buccal surfaces of 36 sound premolar teeth were ground flat and polished with abrasive discs. Half the polished surfaces were covered with tape to maintain a reference surface. Samples were randomly allocated into three groups. Group A was pretreated with tooth mousse (TM) 4 times a day for 5 days. Group B was pretreated with 0.2% sodium fluoride mouthwash 4 times a day for 5 days. Group C was considered as the control group with no pretreatment. In the next step, the samples were exposed to Coca-Cola 4 times a day for 3 days. After each erosive cycle, the samples were rinsed with deionized water and stored in artificial saliva. The surface loss was determined using profilometry. Results: The erosion in both Groups A and B was less than the control group. The surface loss in mouthwash group was significantly lower than in the control group. Erosion in TM group was more than the mouthwash group and less than the control group. Conclusion: Sodium fluoride mouthwash is more effective for prevention of dentin erosion. PMID:24944448

  15. Modeling pulmonary alveolar microlithiasis by epithelial deletion of the Npt2b sodium phosphate cotransporter reveals putative biomarkers and strategies for treatment.

    PubMed

    Saito, Atsushi; Nikolaidis, Nikolaos M; Amlal, Hassane; Uehara, Yasuaki; Gardner, Jason C; LaSance, Kathleen; Pitstick, Lori B; Bridges, James P; Wikenheiser-Brokamp, Kathryn A; McGraw, Dennis W; Woods, Jason C; Sabbagh, Yves; Schiavi, Susan C; Altinişik, Göksel; Jakopović, Marko; Inoue, Yoshikazu; McCormack, Francis X

    2015-11-11

    Pulmonary alveolar microlithiasis (PAM) is a rare, autosomal recessive lung disorder associated with progressive accumulation of calcium phosphate microliths. Inactivating mutations in SLC34A2, which encodes the NPT2b sodium-dependent phosphate cotransporter, has been proposed as a cause of PAM. We show that epithelial deletion of Npt2b in mice results in a progressive pulmonary process characterized by diffuse alveolar microlith accumulation, radiographic opacification, restrictive physiology, inflammation, fibrosis, and an unexpected alveolar phospholipidosis. Cytokine and surfactant protein elevations in the alveolar lavage and serum of PAM mice and confirmed in serum from PAM patients identify serum MCP-1 (monocyte chemotactic protein 1) and SP-D (surfactant protein D) as potential biomarkers. Microliths introduced by adoptive transfer into the lungs of wild-type mice produce marked macrophage-rich inflammation and elevation of serum MCP-1 that peaks at 1 week and resolves at 1 month, concomitant with clearance of stones. Microliths isolated by bronchoalveolar lavage readily dissolve in EDTA, and therapeutic whole-lung EDTA lavage reduces the burden of stones in the lungs. A low-phosphate diet prevents microlith formation in young animals and reduces lung injury on the basis of reduction in serum SP-D. The burden of pulmonary calcium deposits in established PAM is also diminished within 4 weeks by a low-phosphate diet challenge. These data support a causative role for Npt2b in the pathogenesis of PAM and the use of the PAM mouse model as a preclinical platform for the development of biomarkers and therapeutic strategies. PMID:26560359

  16. Pilot-test of the calcium sodium phosphate (CNP) process for the stabilization/solidification of various mercury-contaminated wastes.

    PubMed

    Cho, Jae Han; Eom, Yujin; Lee, Tai Gyu

    2014-12-01

    A pilot-scale calcium sodium phosphate (CNP) plant was designed and manufactured to examine the performance of recently developed stabilization/solidification (S/S) technology. Hg-contaminated wastes samples generated via various industrial processes in Korea, including municipal, industrial, and medical waste incineration, wastewater treatment, and lime production, were collected and treated using the pilot-scale CNP plant. S/S samples were fabricated according to various operating conditions, including waste type, the dose of the stabilization reagent (Na2S), and the waste loading ratio. Although the performances (Hg leaching value and compressive strength) were reduced as the waste loading ratio increased, most of the S/S samples exhibited Hg leaching values that were below the universal treatment standard limit of 25 μg L(-1) and compressive strengths that exceeded the criterion of 3.45 MPa. PMID:25169648

  17. Sodium citrate and potassium phosphate as alternative adsorption buffers in hydrophobic and aromatic thiophilic chromatographic purification of plasmid DNA from neutralized lysate.

    PubMed

    Bonturi, Nemailla; Radke, Vanessa Soraia Cortez Oliveira; Bueno, Sônia Maria Alves; Freitas, Sindélia; Azzoni, Adriano Rodrigues; Miranda, Everson Alves

    2013-03-01

    The number of studies on gene therapy using plasmid vectors (pDNA) has increased in recent years. As a result, the demand for preparations of pDNA in compliance with recommendations of regulatory agencies (EMEA, FDA) has also increased. Plasmid DNA is often obtained through fermentation of transformed Escherichia coli and purification by a series of unit operations, including chromatography. Hydrophobic interaction chromatography (HIC) and thiophilic aromatic chromatography (TAC), both using ammonium sulfate buffers, are commonly employed with success. This work was aimed at studying the feasibility of utilizing alternative salts in the purification of pDNA from neutralized lysate with phenyl-agarose (HIC) and mercaptopyrimidine-agarose (TAC) adsorbents. Their selectivity toward sc pDNA was evaluated through adsorption studies using 1.5 mol/L sodium citrate and 2.0 mol/L potassium phosphate as adsorption buffers. Chromatography with mercaptopyrimidine-agarose adsorbent and 1.5 mol/L sodium citrate was able to recover 91.1% of the pDNA with over 99.0% removal of gDNA and endotoxin. This represents a potential alternative for the primary recovery of sc pDNA. However, the most promising result was obtained using 2.0 mol/L potassium phosphate buffer and a mercaptopyrimidine-agarose column. In a single chromatographic step, this latter buffer/adsorbent system recovered 68.5% of the pDNA with 98.8% purity in accordance with the recommendations of regulatory agencies with regard to RNA and endotoxin impurity. PMID:23411021

  18. Bismuth citrate in the quantification of inorganic phosphate and its utility in the determination of membrane-bound phosphatases.

    PubMed

    Cariani, L; Thomas, L; Brito, J; del Castillo, J R

    2004-01-01

    This paper describes a rapid and sensitive method to determine inorganic phosphate, even in the presence of labile organic phosphate compounds and large quantities of proteins. The method eliminates the use of sodium arsenite, a highly toxic compound, substituting bismuth citrate for it to stabilize the phosphomolybdic acid complex formed during the interaction of inorganic phosphate and molybdate reduced by ascorbic acid. This method has also been adapted to microplates and has been used to determine the activities of Na/K ATPase and alkaline phosphatase of intestinal basolateral and luminal plasma membranes. PMID:14654048

  19. Trisodium phosphate and sodium hypochlorite are more effective as antimicrobials against Campylobacter and Salmonella on duck as compared to chicken meat.

    PubMed

    Sarjit, Amreeta; Dykes, Gary A

    2015-06-16

    Little work has been reported on the use of commercial antimicrobials against foodborne pathogens on duck meat. We investigated the effectiveness of trisodium phosphate (TSP) and sodium hypochlorite (SH) as antimicrobial treatments against Campylobacter and Salmonella on duck meat under simulated commercial water chilling conditions. The results were compared to the same treatments on well-studied chicken meat. A six strain Campylobacter or Salmonella cocktail was inoculated (5 ml) at two dilution levels (10(4) and 10(8) cfu/ml) onto 25 g duck or chicken meat with skin and allowed to attach for 10 min. The meat was exposed to three concentrations of pH adjusted TSP (8, 10 and 12% (w/v), pH 11.5) or SH (40, 50 and 60 ppm, pH 5.5) in 30 ml water under simulated spin chiller conditions (4 °C, agitation) for 10 min. In a parallel experiment the meat was placed in the antimicrobial treatments before inoculation and bacterial cocktails were added to the meat after the antimicrobial solution was removed while all other parameters were maintained. Untreated controls and controls using water were included in all experiments. Bacterial numbers were determined on Campylobacter blood-free selective agar and Mueller Hinton agar or xylose deoxycholate agar and tryptone soya agar using the thin agar layer method for Campylobacter and Salmonella, respectively. All TSP concentrations significantly (p<0.05) reduced numbers of Campylobacter (~1.2-6.4 log cfu/cm(2)) and Salmonella (~0.4-6.6 log cfu/cm(2)) on both duck and chicken meat. On duck meat, numbers of Campylobacter were less than the limit of detection at higher concentrations of TSP and numbers of Salmonella were less than the limit of detection at all concentrations of TSP except one. On chicken meat, numbers of Campylobacter and Salmonella were less than the limit of detection only at the lower inoculum level and higher TSP concentrations. By contrast only some of the concentrations of SH significantly (p<0.05) reduced

  20. QM/MM analysis suggests that Alkaline Phosphatase (AP) and Nucleotide pyrophosphatase/phosphodiesterase slightly tighten the transition state for phosphate diester hydrolysis relative to solution: implication for catalytic promiscuity in the AP superfamily

    PubMed Central

    Hou, Guanhua

    2011-01-01

    Several members of the Alkaline Phosphatase (AP) superfamily exhibit a high level of catalytic proficiency and promiscuity in structurally similar active sites. A thorough characterization of the nature of transition state for different substrates in these enzymes is crucial for understanding the molecular mechanisms that govern those remarkable catalytic properties. In this work, we study the hydrolysis of a phosphate diester, MpNPP−, in solution, two experimentally well-characterized variants of AP (R166S AP, R166S/E322Y AP) and wild type Nucleotide pyrophosphatase/phosphodiesterase (NPP) by QM/MM calculations in which the QM method is an approximate density functional theory previously parameterized for phosphate hydrolysis (SCC-DFTBPR). The general agreements found between these calculations and available experimental data for both solution and enzymes support the use of SCC-DFTBPR/MM for a semi-quantitative analysis of the catalytic mechanism and nature of transition state in AP and NPP. Although phosphate diesters are cognate substrates for NPP but promiscuous substrates for AP, the calculations suggest that their hydrolysis reactions catalyzed by AP and NPP feature similar synchronous transition states that are slightly tighter in nature compared to that in solution, due in part to the geometry of the bimetallic zinc motif. Therefore, this study provides the first direct computational support to the hypothesis that enzymes in the AP superfamily catalyze cognate and promiscuous substrates via similar transition states to those in solution. Our calculations do not support the finding of recent QM/MM studies by López-Canut and coworkers, who suggested that the same diester substrate goes through a much looser transition state in NPP/AP than in solution, a result likely biased by the large structural distortion of the bimetallic zinc site in their simulations. Finally, our calculations for different phosphate diester orientations and phosphorothioate diesters

  1. Foscarnet, an inhibitor of the sodium-phosphate cotransporter NaPi-IIa, inhibits phosphorylation of glycogen synthase kinase-3β by lithium in the rat kidney cortex.

    PubMed

    Uwai, Yuichi; Kawasaki, Tatsuya; Nabekura, Tomohiro

    2016-06-01

    Lithium, which is used in the treatment of and prophylaxis for bipolar disease, inhibits glycogen synthase kinase-3β (GSK3β) by producing its phosphorylated form (p-GSK3β). GSK3β plays a role in apoptosis and some kinds of acute kidney injuries, and the formation of p-GSK3β is considered to contribute to protection against acute kidney injury. We previously reported that the sodium-phosphate cotransporter NaPi-IIa (SLC34A1) mediated the reabsorption of lithium in the rat kidney. In the present study, the phosphorylation status of GSK3β in the kidney cortex of rats administered lithium chloride and foscarnet, a typical inhibitor of NaPi-IIa, was examined using Western blotting. Under a 2-h infusion of lithium chloride, the plasma concentration of lithium was 1.06 mEq/l, and its renal clearance was calculated as 1.18 ml/min/kg, which was 29.6% of creatinine clearance. The abundance of p-GSK3β in the kidney cortex was augmented by the administration of lithium. The simultaneous infusion of foscarnet increased the renal clearance of lithium and its ratio to creatinine clearance as well as the urinary excretion of phosphate. Foscarnet also inhibited the lithium-induced phosphorylation of GSK3β. These results suggest that the reabsorption of lithium by NaPi-IIa triggers the phosphorylation of GSK3β in the rat kidney cortex. PMID:27238574

  2. Comparison of a dual-phase fluoride toothpaste containing calcium, phosphate, and sodium bicarbonate with a regular fluoride toothpaste on calculus formation.

    PubMed

    Putt, Mark S; Milleman, Kimberly R; Milleman, Jeffery L; Ghassemi, Annahita

    2004-09-01

    This clinical study compared the effect on dental calculus formation of a dual-phase fluoride dentifrice containing sodium bicarbonate, calcium, and phosphate with that of a regular dentifrice using a short-term clinical model in which calculus formation was facilitated. A total of 87 adult volunteers completed this study, which was a double-blind, parallel-group design, consisting of 2-week pretrial and trial periods separated by a washout period. A partial-mouth technique was used wherein the lower anterior teeth were protected from brushing by a custom-fitted toothshield, which doubled as an applicator for an undiluted dentifrice, twice daily. Calculus was measured on the labial/lingual surfaces of six lower anterior teeth by the Volpe-Manhold Index (V-MI). Subjects used a non-tartar-control dentifrice during the pretrial period to determine calculus formation rates, and these V-MI scores were used as baseline data for random allocation to either a control or test product for the trial period. Subjects who were accepted into the study, based on existing tartar deposits, readily formed calculus during the pretrial period using the toothshield method. During the trial period, subjects who were assigned the test dentifrice had comparable amounts of calculus accumulation to those who used the control dentifrice. However, subjects in the test dentifrice group had significantly lower (16%) calculus scores on lingual surfaces than those in the control group. Intragroup comparisons of V-MI data from the pretrial period with those from the trial period provided similar overall results to the comparisons between groups. This study demonstrated that a dual-phase baking soda dentifrice containing calcium and phosphate did not increase calculus accumulation relative to a regular dentifrice when used by adults with a propensity for developing calculus. PMID:15645907

  3. Sodium meta-autunite colloids: Synthesis, characterization,stability

    SciTech Connect

    zzuoping@lbl.gov

    2004-04-10

    Waste forms of U such as those in the United States Department of Energy's Hanford Site often contain high concentrations of Na and P. Low solubility sodium uranyl phosphates such as sodium meta-autunite have the potential to form mobile colloids that can facilitate transport of this radionuclide. In order to understand the geochemical behavior of uranyl phosphate colloids, we synthesized sodiummeta-autunite colloids, and characterized their morphology, chemical composition, structure, dehydration, and surface charge. The stability of these synthetic plate-shaped colloids was tested with respect to time and pH. The highest aggregation rate was observed at pH 3, and the rate decreases as pH increases, indicating that higher stability of colloid dispersion under neutral and alkaline pH conditions. The synthetic colloids are all negatively charged and no isoelectric points were found over a pH range of 3 to 9. The zeta-potentials of the colloids in the phosphate solution show a strong pH-dependence in the more acidic range over time, but are relatively constant in the neutral and alkaline pH range. The geochemical behavior of the synthetic colloids can be interpreted using DLVO theory. The results suggest that formation of mobile sodium meta-autunite colloids can enhance the transport of U in some contaminated sediments.

  4. Inorganic Phosphate and Sodium Ions Are Cogerminants for Spores of Clostridium perfringens Type A Food Poisoning-Related Isolates▿

    PubMed Central

    Paredes-Sabja, Daniel; Udompijitkul, Pathima; Sarker, Mahfuzur R.

    2009-01-01

    Clostridium perfringens type A isolates carrying a chromosomal copy of the enterotoxin (cpe) gene are involved in the majority of food poisoning (FP) outbreaks, while type A isolates carrying a plasmid-borne cpe gene are involved in C. perfringens-associated non-food-borne (NFB) gastrointestinal diseases. To cause diseases, C. perfringens spores must germinate and return to active growth. Previously, we showed that only spores of FP isolates were able to germinate with K+ ions. We now found that the spores of the majority of FP isolates, but none of the NFB isolates, germinated with the cogerminants Na+ and inorganic phosphate (NaPi) at a pH of ∼6.0. Spores of gerKA-KC and gerAA mutants germinated to a lesser extent and released less dipicolinic acid (DPA) than did wild-type spores with NaPi. Although gerKB spores germinated to a similar extent as wild-type spores with NaPi, their rate of germination was lower. Similarly, gerO and gerO gerQ mutant spores germinated slower and released less DPA than did wild-type spores with NaPi. In contrast, gerQ spores germinated to a slightly lesser extent than wild-type spores but released all of their DPA during NaPi germination. In sum, this study identified NaPi as a novel nutrient germinant for spores of most FP isolates and provided evidence that proteins encoded by the gerKA-KC operon, gerAA, and gerO are required for NaPi-induced spore germination. PMID:19666724

  5. Effect of chlorine, sodium chloride, trisodium phosphate, and ultraviolet radiation on the reduction of Yersinia enterocolitica and mesophilic aerobic bacteria from eggshell surface.

    PubMed

    Favier, G L; Escudero, M E; de Guzman, A M

    2001-10-01

    Eggshell sanitizing practices are necessary to improve microbiological safety of fresh hen eggs and their products. In this work, the effects of 100 mg/liter free chlorine (chl), 3% sodium chloride (NaCl), 1, 5, and 12% trisodium phosphate (TSP) in wash solutions, and UVR (ultraviolet radiation; 4.573 microW/cm2) were studied at different times on uninoculated and Yersinia enterocolitica-inoculated eggs. On uninoculated eggs, the best results were obtained with 100 mg/liter chlorine and UV exposure for >25 min, with reductions of 1.28 and 1.60 log cycles, respectively, compared to the average bacterial count (4.55 log CFU/egg) on the control (untreated eggs). On Y. enterocolitica-inoculated eggs, highest reductions of the average bacterial count (7.35 log CFU/egg) were obtained with 5 and 12% TSP and 100 mg/liter chl. The decrease obtained with 12% TSP (3.74-log reduction) was significantly higher (P < 0.05) than those obtained with the remaining treatments. Y. enterocolitica was more resistant to UVR than the eggshell natural mesophilic aerobic microflora, except when low inoculum (4.39 log CFU/egg) was assayed. Changes in eggshell microstructure were measured by the blue lake staining method. The presence of Yersinia and Salmonella in eggshell natural flora was also investigated. PMID:11601717

  6. The Sodium-Dependent Inorganic Phosphate Transporter SLC34A1 (NaPi-IIa) Is Not Localized in the Mouse Brain

    PubMed Central

    Larsson, Max; Morland, Cecilie; Poblete-Naredo, Irais; Biber, Jürg; Danbolt, Niels Christian; Gundersen, Vidar

    2011-01-01

    The sodium-dependent inorganic phosphate transporter NaPi-IIa is expressed in the kidney. Here, the authors used a polyclonal antiserum raised against NaPi-IIa- and NaPi-IIa-deficient mice to characterize its expression in nervous tissue. Western blots showed that a NaPi-IIa immunoreactive band (~90 kDa) was only present in wild-type kidney membranes and not in kidney knockout or wild-type brain membranes. In the water-soluble fraction of wild-type and knockout brains, another band (~50 kDa) was observed; this band was not detected in the kidney. Light and electron microscopic immunohistochemistry using the NaPi-IIa antibodies showed immunolabeling of kidney tubules in wild-type but not knockout mice. In the brain, labeling of presynaptic nerve terminals was present also in NaPi-IIa-deficient mice. This labeling pattern was also produced by the NaPi-IIa preimmune serum. The authors conclude that the polyclonal antiserum is specific toward NaPi-IIa in the kidney, but in the brain, immunolabeling is caused by a cross-reaction of the antiserum with an unknown cytosolic protein that is not present in the kidney. This tissue-specific cross-reactivity highlights a potential pitfall when validating antibody specificity using knockout mouse-derived tissue other than the specific tissue of interest and underlines the utility of specificity testing using preimmune sera. PMID:21606201

  7. A Randomized Prospective Study of Bowel Preparation for Colonoscopy with Low-Dose Sodium Phosphate Tablets versus Polyethylene Glycol Electrolyte Solution

    PubMed Central

    Murakami, Takashi; Ritsuno, Hideaki; Ueyama, Hiroya; Matsumoto, Kenshi; Nagahara, Akihito; Watanabe, Sumio

    2014-01-01

    Optimal bowel preparation is essential for the safety and outcome of colonoscopy. A solution containing polyethylene glycol (PEG) is often used as a bowel cleansing agent, but some patients are intolerant of PEG, and this may lead to discontinuation of colonoscopy. Sodium phosphates (NaP) tablets are designed to improve patient acceptance and compliance. The objective of this study was to compare bowel preparation efficiency and patient acceptance of a 30 NaP tablet preparation (L-NaP) and a 2 L PEG preparation. Patients were randomized into either the L-NaP or PEG group. The primary endpoint was the efficiency of colon cleansing as assessed by a validated four-point scale according to the Aronchick scale by endoscopists and was verified by blinded investigators. The secondary endpoints were patients' tolerability and acceptance. Colon-cleansing efficiency was not significantly different between the two preparations. However, patients' overall judgment was significantly in favor of L-NaP, reflecting better acceptance of L-NaP than PEG. Additionally, more patients favored L-NaP over PEG in a hypothetical future occasion requiring colonoscopy. PMID:25309588

  8. Identification of the First Sodium Binding Site of the Phosphate Cotransporter NaPi-IIa (SLC34A1)

    PubMed Central

    Fenollar-Ferrer, Cristina; Forster, Ian C.; Patti, Monica; Knoepfel, Thomas; Werner, Andreas; Forrest, Lucy R.

    2015-01-01

    Transporters of the SLC34 family (NaPi-IIa,b,c) catalyze uptake of inorganic phosphate (Pi) in renal and intestinal epithelia. The transport cycle requires three Na+ ions and one divalent Pi to bind before a conformational change enables translocation, intracellular release of the substrates, and reorientation of the empty carrier. The electrogenic interaction of the first Na+ ion with NaPi-IIa/b at a postulated Na1 site is accompanied by charge displacement, and Na1 occupancy subsequently facilitates binding of a second Na+ ion at Na2. The voltage dependence of cotransport and presteady-state charge displacements (in the absence of a complete transport cycle) are directly related to the molecular architecture of the Na1 site. The fact that Li+ ions substitute for Na+ at Na1, but not at the other sites (Na2 and Na3), provides an additional tool for investigating Na1 site-specific events. We recently proposed a three-dimensional model of human SLC34a1 (NaPi-IIa) including the binding sites Na2, Na3, and Pi based on the crystal structure of the dicarboxylate transporter VcINDY. Here, we propose nine residues in transmembrane helices (TM2, TM3, and TM5) that potentially contribute to Na1. To verify their roles experimentally, we made single alanine substitutions in the human NaPi-IIa isoform and investigated the kinetic properties of the mutants by voltage clamp and 32P uptake. Substitutions at five positions in TM2 and one in TM5 resulted in relatively small changes in the substrate apparent affinities, yet at several of these positions, we observed significant hyperpolarizing shifts in the voltage dependence. Importantly, the ability of Li+ ions to substitute for Na+ ions was increased compared with the wild-type. Based on these findings, we adjusted the regions containing Na1 and Na3, resulting in a refined NaPi-IIa model in which five positions (T200, Q206, D209, N227, and S447) contribute directly to cation coordination at Na1. PMID:25992725

  9. Identification of the first sodium binding site of the phosphate cotransporter NaPi-IIa (SLC34A1).

    PubMed

    Fenollar-Ferrer, Cristina; Forster, Ian C; Patti, Monica; Knoepfel, Thomas; Werner, Andreas; Forrest, Lucy R

    2015-05-19

    Transporters of the SLC34 family (NaPi-IIa,b,c) catalyze uptake of inorganic phosphate (Pi) in renal and intestinal epithelia. The transport cycle requires three Na(+) ions and one divalent Pi to bind before a conformational change enables translocation, intracellular release of the substrates, and reorientation of the empty carrier. The electrogenic interaction of the first Na(+) ion with NaPi-IIa/b at a postulated Na1 site is accompanied by charge displacement, and Na1 occupancy subsequently facilitates binding of a second Na(+) ion at Na2. The voltage dependence of cotransport and presteady-state charge displacements (in the absence of a complete transport cycle) are directly related to the molecular architecture of the Na1 site. The fact that Li(+) ions substitute for Na(+) at Na1, but not at the other sites (Na2 and Na3), provides an additional tool for investigating Na1 site-specific events. We recently proposed a three-dimensional model of human SLC34a1 (NaPi-IIa) including the binding sites Na2, Na3, and Pi based on the crystal structure of the dicarboxylate transporter VcINDY. Here, we propose nine residues in transmembrane helices (TM2, TM3, and TM5) that potentially contribute to Na1. To verify their roles experimentally, we made single alanine substitutions in the human NaPi-IIa isoform and investigated the kinetic properties of the mutants by voltage clamp and (32)P uptake. Substitutions at five positions in TM2 and one in TM5 resulted in relatively small changes in the substrate apparent affinities, yet at several of these positions, we observed significant hyperpolarizing shifts in the voltage dependence. Importantly, the ability of Li(+) ions to substitute for Na(+) ions was increased compared with the wild-type. Based on these findings, we adjusted the regions containing Na1 and Na3, resulting in a refined NaPi-IIa model in which five positions (T200, Q206, D209, N227, and S447) contribute directly to cation coordination at Na1. PMID:25992725

  10. Preformulation and characterization of a lidocaine hydrochloride and dexamethasone sodium phosphate thermo-reversible and bioadhesive long-acting gel for intraperitoneal administration.

    PubMed

    Arbelaez-Camargo, Diana; Suñé-Negre, Josep Maria; Roig-Carreras, Manel; García-Montoya, Encarna; Pérez-Lozano, Pilar; Miñarro-Carmona, Montserrat; Ticó-Grau, Josep Ramon

    2016-02-10

    The search for new formulations of anaesthetic agents that allow a localized administration and provide a prolonged effect is of great interest in the multimodal management of postoperative pain. The pre-formulation and characterization of a lidocaine and dexamethasone thermosensitive and bioadhesive long-acting gel for intraperitoneal administration was done as a tool in the management of pain in abdominal surgeries. The pre-formulation process was conducted by a systematic variation of the concentration of the different polymers, until setting it, in a suitable concentration that allowed an adequate gelation temperature. The poloxamer 407 (P407) was used as the main polymer; hydroxypropyl methylcellulose (HPMC) as the bioadhesive agent and polyvinyl pyrrolidone (PVP) to adjust the gelation temperature and physicochemical properties. The formulations were characterized by gelation temperature, pH, viscosity at 25°C and 37°C, gelation time, density and osmolality. Gelation temperature was decreased when increasing the concentration of hydroxypropyl methylcellulose and poloxamer 407, this effect was also observed when adding lidocaine hydrochloride and dexamethasone sodium phosphate to the formulations. The gelation temperature did not have statistically significant relation with the PVP concentration (P-value of 0.6797), even though, there is a tendency in the gelation temperature by varying it. Between the developed formulations, the 12.5/3.3/0.4% (P407/HPMC/PVP) formulation presents an appropriate gelation temperature, a suitable viscosity for administration by syringe, an adequate and stable pH and osmolality to prevent tissue damage and a correct gelation time that allowed the formation of a prolonged release implant. PMID:26685726

  11. Origin of low sodium capacity in graphite and generally weak substrate binding of Na and Mg among alkali and alkaline earth metals

    NASA Astrophysics Data System (ADS)

    Liu, Yuanyue; Merinov, Boris V.; Goddard, William A., III

    2016-04-01

    It is well known that graphite has a low capacity for Na but a high capacity for other alkali metals. The growing interest in alternative cation batteries beyond Li makes it particularly important to elucidate the origin of this behavior, which is not well understood. In examining this question, we find a quite general phenomenon: among the alkali and alkaline earth metals, Na and Mg generally have the weakest chemical binding to a given substrate, compared with the other elements in the same column of the periodic table. We demonstrate this with quantum mechanics calculations for a wide range of substrate materials (not limited to C) covering a variety of structures and chemical compositions. The phenomenon arises from the competition between trends in the ionization energy and the ion-substrate coupling, down the columns of the periodic table. Consequently, the cathodic voltage for Na and Mg is expected to be lower than those for other metals in the same column. This generality provides a basis for analyzing the binding of alkali and alkaline earth metal atoms over a broad range of systems.

  12. Origin of low sodium capacity in graphite and generally weak substrate binding of Na and Mg among alkali and alkaline earth metals.

    PubMed

    Liu, Yuanyue; Merinov, Boris V; Goddard, William A

    2016-04-01

    It is well known that graphite has a low capacity for Na but a high capacity for other alkali metals. The growing interest in alternative cation batteries beyond Li makes it particularly important to elucidate the origin of this behavior, which is not well understood. In examining this question, we find a quite general phenomenon: among the alkali and alkaline earth metals, Na and Mg generally have the weakest chemical binding to a given substrate, compared with the other elements in the same column of the periodic table. We demonstrate this with quantum mechanics calculations for a wide range of substrate materials (not limited to C) covering a variety of structures and chemical compositions. The phenomenon arises from the competition between trends in the ionization energy and the ion-substrate coupling, down the columns of the periodic table. Consequently, the cathodic voltage for Na and Mg is expected to be lower than those for other metals in the same column. This generality provides a basis for analyzing the binding of alkali and alkaline earth metal atoms over a broad range of systems. PMID:27001855

  13. 21 CFR 184.1301 - Ferric phosphate.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... reaction of sodium phosphate with ferric chloride or ferric citrate. (b) The ingredient meets the... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Ferric phosphate. 184.1301 Section 184.1301 Food... Specific Substances Affirmed as GRAS § 184.1301 Ferric phosphate. (a) Ferric phosphate...

  14. 21 CFR 184.1301 - Ferric phosphate.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... reaction of sodium phosphate with ferric chloride or ferric citrate. (b) The ingredient meets the... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Ferric phosphate. 184.1301 Section 184.1301 Food... Specific Substances Affirmed as GRAS § 184.1301 Ferric phosphate. (a) Ferric phosphate...

  15. Biosynthesis of Dolichyl Phosphate

    PubMed Central

    Hopp, H. Esteban; Daleo, Gustavo R.; Romero, Pedro A.; Lezica, Rafael Pont

    1978-01-01

    This is the first report not only on the presence of polyprenyl phosphates and their site of synthesis in algae, but also on the formation of their sugar derivatives in this system. A glucose acceptor lipid was isolated from the nonphotosynthetic alga Prototheca zopfii. The lipid was acidic and resistant to mild acid and alkaline treatments. The glucosylated lipid was labile to mild acid hydrolysis and resistant to phenol treatment and catalytic hydrogenation, as dolichyl phosphate glucose is. These results are consistent with the properties of an α-saturated polyprenyl phosphate. The polyprenylic nature of the lipid was confirmed by biosynthesis from radioactive mevalonate. The [14C]lipid had the same chromatographic properties as dolichyl phosphate in DEAE-cellulose and Sephadex LH-20. Strong alkaline treatment and enzymic hydrolysis liberated free alcohols with chain lengths ranging from C90 to C105, C95 and C100 being the most abundant molecular forms. The glucose acceptor activity of the biosynthesized polyprenyl phosphate was confirmed. The ability of different subcellular fractions to synthesize dolichyl phosphate was studied. Mitochondria and the Golgi apparatus were the sites of dolichyl phosphate synthesis from mevalonate. PMID:16660269

  16. The effectiveness of ferrous iron and sodium dithionite for decreasing resin-extractable Cr(VI) in Cr(VI)-spiked alkaline soils.

    PubMed

    Cheng, Chia-Jung; Lin, Tzu-Huei; Chen, Chiou-Pin; Juang, Kai-Wei; Lee, Dar-Yuan

    2009-05-30

    Ferrous iron, Na(2)S(2)O(4), and a mixture of Fe(II) and Na(2)S(2)O(4) (4:1 mol/mol) were tested for their effectiveness for decreasing resin-extractable Cr(VI) in alkaline Cr(VI)-spiked soils. The results indicated that adding those reductants greatly decreased the amount of resin-extractable Cr(VI) when the application rate of reductants equaled the number of equivalents of dichromate added to the Cr(VI)-spiked soils. This was mainly as a result of the Cr(VI) reduction into Cr(III), as supported by the XANES spectra. Among the tested reductants, a mixture of Fe(II) and Na(2)S(2)O(4) was the most effective to decrease resin-extractable Cr(VI). The extent to which resin-extractable Cr(VI) and soil pH were decreased was affected by the pH of the reductants. Among the tested reductants at various pH, FeSO(4) at pH below 1 was the most effective in decreasing resin-extractable Cr(VI) in alkaline soils. However, the soil pH was the most decreased as well. On the other hand, the mixtures of ferrous iron and dithionite at a wide range of pH were all efficient (>70% efficiency) in decreasing resin-extractable Cr(VI). Moreover, the extent of the decrease in soil pH was much smaller than that by FeSO(4) (pH<1) alone, and thus the possibility of the Cr(III) hazard can be avoided. PMID:18824300

  17. 21 CFR 201.64 - Sodium labeling.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... contains sodium bicarbonate, sodium phosphate, or sodium biphosphate as an active ingredient for oral... 21 Food and Drugs 4 2013-04-01 2013-04-01 false Sodium labeling. 201.64 Section 201.64 Food and... LABELING Labeling Requirements for Over-the-Counter Drugs § 201.64 Sodium labeling. (a) The labeling...

  18. 21 CFR 201.64 - Sodium labeling.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... contains sodium bicarbonate, sodium phosphate, or sodium biphosphate as an active ingredient for oral... 21 Food and Drugs 4 2011-04-01 2011-04-01 false Sodium labeling. 201.64 Section 201.64 Food and... LABELING Labeling Requirements for Over-the-Counter Drugs § 201.64 Sodium labeling. (a) The labeling...

  19. 21 CFR 201.64 - Sodium labeling.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... contains sodium bicarbonate, sodium phosphate, or sodium biphosphate as an active ingredient for oral... 21 Food and Drugs 4 2012-04-01 2012-04-01 false Sodium labeling. 201.64 Section 201.64 Food and... LABELING Labeling Requirements for Over-the-Counter Drugs § 201.64 Sodium labeling. (a) The labeling...

  20. 21 CFR 201.64 - Sodium labeling.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... contains sodium bicarbonate, sodium phosphate, or sodium biphosphate as an active ingredient for oral... 21 Food and Drugs 4 2014-04-01 2014-04-01 false Sodium labeling. 201.64 Section 201.64 Food and... LABELING Labeling Requirements for Over-the-Counter Drugs § 201.64 Sodium labeling. (a) The labeling...

  1. Removal of plutonium and americium from alkaline waste solutions

    DOEpatents

    Schulz, Wallace W.

    1979-01-01

    High salt content, alkaline waste solutions containing plutonium and americium are contacted with a sodium titanate compound to effect removal of the plutonium and americium from the alkaline waste solution onto the sodium titanate and provide an effluent having a radiation level of less than 10 nCi per gram alpha emitters.

  2. Evolution of the corrosion process of AA 2024-T3 in an alkaline NaCl solution with sodium dodecylbenzenesulfonate and lanthanum chloride inhibitors

    NASA Astrophysics Data System (ADS)

    Zhou, Biner; Wang, Yishan; Zuo, Yu

    2015-12-01

    The evolution of the corrosion process of AA 2024-T3 in 0.58 g L-1 NaCl solution (pH 10) with sodium dodecylbenzenesulfonate (SDBS) and lanthanum chloride inhibitors was studied with electrochemical and surface analysis methods. With the addition of the compounded LaCl3 and SDBS inhibitors, in the early stage the polarization behavior of AA 2024-T3 changed from active corrosion to passivation, and both the general corrosion and pitting corrosion were inhibited. However, with the immersion time extended, the passive behavior gradually disappeared and pitting happened at the Cu-rich phases. After 24 h immersion, the compounded inhibitors still showed good inhibition for general corrosion, but the polarization curve again presented the characteristic similar to active polarization. The compounded inhibitors also inhibited the pitting corrosion to some extent. The acting mechanism of the inhibitors SDBS and La3Cl on the corrosion process of AA 2024-T3 in the test solution was discussed.

  3. Separating and Stabilizing Phosphate from High-Level Radioactive Waste: Process Development and Spectroscopic Monitoring

    SciTech Connect

    Lumetta, Gregg J.; Braley, Jenifer C.; Peterson, James M.; Bryan, Samuel A.; Levitskaia, Tatiana G.

    2012-05-09

    Removing phosphate from alkaline high-level waste sludges at the Department of Energy's Hanford Site in Washington State is necessary to increase the waste loading in the borosilicate glass waste form that will be used to immobilize the highly radioactive fraction of these wastes. We are developing a process which first leaches phosphate from the high-level waste solids with aqueous sodium hydroxide, and then isolates the phosphate by precipitation with calcium oxide. Tests with actual tank waste confirmed that this process is an effective method of phosphate removal from the sludge and offers an additional option for managing the phosphorus in the Hanford tank waste solids. The presence of vibrationally active species, such as nitrate and phosphate ions, in the tank waste processing streams makes the phosphate removal process an ideal candidate for monitoring by Raman or infrared spectroscopic means. As a proof-of-principle demonstration, Raman and Fourier transform infrared (FTIR) spectra were acquired for all phases during a test of the process with actual tank waste. Quantitative determination of phosphate, nitrate, and sulfate in the liquid phases was achieved by Raman spectroscopy, demonstrating the applicability of Raman spectroscopy for the monitoring of these species in the tank waste process streams.

  4. Separating and stabilizing phosphate from high-level radioactive waste: process development and spectroscopic monitoring.

    PubMed

    Lumetta, Gregg J; Braley, Jenifer C; Peterson, James M; Bryan, Samuel A; Levitskaia, Tatiana G

    2012-06-01

    Removing phosphate from alkaline high-level waste sludges at the Department of Energy's Hanford Site in Washington State is necessary to increase the waste loading in the borosilicate glass waste form that will be used to immobilize the highly radioactive fraction of these wastes. We are developing a process which first leaches phosphate from the high-level waste solids with aqueous sodium hydroxide, and then isolates the phosphate by precipitation with calcium oxide. Tests with actual tank waste confirmed that this process is an effective method of phosphate removal from the sludge and offers an additional option for managing the phosphorus in the Hanford tank waste solids. The presence of vibrationally active species, such as nitrate and phosphate ions, in the tank waste processing streams makes the phosphate removal process an ideal candidate for monitoring by Raman or infrared spectroscopic means. As a proof-of-principle demonstration, Raman and Fourier transform infrared (FTIR) spectra were acquired for all phases during a test of the process with actual tank waste. Quantitative determination of phosphate, nitrate, and sulfate in the liquid phases was achieved by Raman spectroscopy, demonstrating the applicability of Raman spectroscopy for the monitoring of these species in the tank waste process streams. PMID:22571620

  5. Compared organization of the molecules of NaDEHP and AOT: Determination of the microscopic organization of the sodium bis(2-ethylhexyl)phosphate molecule in the solid state in the reversed hexagonal liquid crystal state

    NASA Astrophysics Data System (ADS)

    Lovera, J.; Lovera, P.; Gregoire, P.

    1988-11-01

    A method to determine the average shape of some molecules is described and applied to sodium bis(2-ethylhexyl)phosphate (NaDEHP) and sodium bis(2-ethylhexyl)sulfosuccinate (AOT). The volumes and lengths of the polar and apolar parts of these molecules are obtained from specific gravity measurements and from the lattice parameters of the hexagonal and lamellar liquid crystal structures. The shape of both molecules is described as a prism. The cross section of the elementary rod in the hexagonal structure intercepts respectively 2.5 and 6 molecules. The noninteger value obtained for NaDEHP is explained by a disorder inside the rod, and the mean value of 6 obtained for AOT is related neither to the symmetry of the lattice nor to the hexagonal average shape of the rod. The parameter limiting the height of the prism is the size of the phosphate coordinance tetrahedron, in the case of NaDEHP, and the length of the succinate chain, in the case of AOT.

  6. Controlled transdermal iontophoresis for poly-pharmacotherapy: Simultaneous delivery of granisetron, metoclopramide and dexamethasone sodium phosphate in vitro and in vivo.

    PubMed

    Cázares-Delgadillo, Jennyfer; Ganem-Rondero, Adriana; Merino, Virginia; Kalia, Yogeshvar N

    2016-03-31

    Iontophoresis has been used to deliver small molecules, peptides and proteins into and across the skin. In principle, it provides a controlled, non-invasive method for poly-pharmacotherapy since it is possible to formulate and to deliver multiple therapeutic agents simultaneously from the anodal and cathodal compartments. The objective of this proof-of-principle study was to investigate the simultaneous anodal iontophoretic delivery of granisetron (GST) and metoclopramide (MCL) and cathodal iontophoresis of dexamethasone sodium phosphate (DEX-P). In addition to validating the hypothesis, these are medications that are routinely used in combination to treat chemotherapy-induced emesis. Two preliminary in vitro studies using porcine skin were performed: Study 1 - effect of formulation composition on anodal co-iontophoresis of GST and MCL and Study 2 - combined anodal iontophoresis of GST (10mM) and MCL (110mM) and cathodal iontophoresis of DEX-P (40mM). The results from Study 1 demonstrated the dependence of GST/MCL transport on the respective drug concentrations when co-iontophoresed at 0.3mA·cm(-2). Although they possess similar physicochemical properties, MCL seemed to be a more efficient charge carrier (JMCL=0.0591∗CMCLvs JGST=0.0414∗CGST). In Study 2, MCL permeation was markedly superior to that of GST (2324.83±307.85 and 209.83±24.84μg·cm(-2), respectively); this was consistent with the difference in their relative concentrations; DEX-P permeation was 336.94±71.91μg·cm(-2). The in vivo studies in Wistar rats (10mM GST, 110mM MCL and 40mM DEX-P (0.5mA·cm(-2) for 5h with Ag/AgCl electrodes and salt bridges) demonstrated that significant drug levels were achieved rapidly for each drug. This was most noticeable for dexamethasone (DEX) where relatively constant plasma levels were obtained from the 1 to 5h time-points; DEX-P was not detected in the plasma since it was completely hydrolyzed to the active metabolite. The calculated input rates in vivo (k01

  7. Sodium bicarbonate in chemical flooding: Part 1: Topical report. [Sodium bicarbonate and sodium carbonate

    SciTech Connect

    Peru, D.A.; Lorenz, P.B.

    1987-07-01

    To compare oil recovery and alkali consumption in alkaline flooding using sodium bicarbonate with other alkaline agents, coreflooding experiments were performed in turn with viscosified sodium bicarbonate and viscosified sodium carbonate solutions. Oil recovery was monitored, and the effluent brine from these corefloods was analyzed for silicon, aluminum, pH, and total inorganic carbon. The results indicate that viscosified sodium bicarbonate recovered more of the asphaltic Cerro-Negro crude than of the less asphaltic Wilmington crude oil. The recovery efficiency using the viscosified sodium carbonate was similar for the two crudes. For both crudes, the percent oil recovery using viscosified sodium carbonate was slightly higher than that using the viscosified sodium bicarbonate. Mineral dissolution and decrease in pH were found to be greater in corefloods using viscosified sodium carbonate. Total inorganic carbon recovery can be obtained in corefloods with either agent, provided that a sufficient water drive follows the chemical slug. Long-term experiments were performed by recirculating alkaline solutions through oil-free, unfired Berea sandstone to monitor the rock/alkali interactions. The experimental results indicate an eight-fold decrease in quartz dissolution by sodium bicarbonate compared with sodium carbonate. Moderate magnesium solubility was observed at the pH of the bicarbonate solution. Low solubility of magnesium and aluminum at the pH of the carbonate indicates the possible formation of precipitates. In these experiments 13% of the carbonate was converted to bicarbonate. Total alkalinity was not significantly decreased with either agent. 18 refs., 5 tabs.

  8. Sodium-Dependent Phosphate Uptake in the Jejunum Is Post-Transcriptionally Regulated in Pigs Fed a Low-Phosphorus Diet and Is Independent of Dietary Calcium Concentration1

    PubMed Central

    Saddoris, Kari L.; Fleet, James C.; Radcliffe, John S.

    2010-01-01

    In rodents, severe dietary P restriction increases active phosphate absorption by the intestine. However, it remains unknown if moderate dietary P restriction has a similar effect. Weanling pigs (n = 32; body weight 7.4 ± 0.55 kg) were used in a 2 × 2 factorial design and fed dietary available P (aP) concentrations of 0.23 or 0.40% and Ca concentrations of 0.58 or 1.00% for 14 d. Diets were formulated on an aP basis instead of a total P basis, because pigs are unable to absorb phytate-P present in corn and soybean meal. Jejunal segments were mounted in modified Ussing chambers for determination of Na+-dependent nutrient transport. Intestinal mucosal scrapings were taken for RNA isolation and brush border membrane (BBM) vesicle isolation. Na+-dependent phosphate uptake and gene expression of Na-phosphate cotransporter IIb (NaPi-IIb), SGLT-1 (sodium/glucose cotransporter-1), and calbindin D(9k) and protein expression of NaPi-IIb were evaluated. Na+-dependent phosphate transport increased (P < 0.05) 46% as dietary aP concentration was decreased. However, increased Na+-dependent phosphate uptake was not accompanied by increased NaPi-IIb mRNA expression. Expression of NaPi-IIb protein in the BBM increased (P < 0.01) 84% in pigs fed low-P diets compared with pigs fed adequate-P diets. No dietary Ca effects or aP × Ca interactions were detected for Na-dependent P uptake, mRNA or protein expression of NaPi-IIb, or mRNA expression of calbindin D(9k). These data suggest that restricting dietary aP concentration by only 43% stimulates Na+-dependent phosphate uptake and expression of the NaPi-IIb protein in the BBM of the small intestine and through a post-transcriptional mechanism. PMID:20164365

  9. Silica in alkaline brines

    USGS Publications Warehouse

    Jones, B.F.; Rettig, S.L.; Eugster, H.P.

    1967-01-01

    Analysis of sodium carbonate-bicarbonate brines from closed basins in volcanic terranes of Oregon and Kenya reveals silica contents of up to 2700 parts per million at pH's higher than 10. These high concentrations of SiO 2 can be attributed to reaction of waters with silicates, and subsequent evaporative concentration accompanied by a rise in pH. Supersaturation with respect to amorphous silica may occur and persist for brines that are out of contact with silicate muds and undersaturated with respect to trona; correlation of SiO2 with concentration of Na and total CO2 support this interpretation. Addition of moredilute waters to alkaline brines may lower the pH and cause inorganic precipitation of substantial amounts of silica.

  10. A fluorescence turn on assay for alkaline phosphatase based on the Cu(2+) catalyzed Fenton-like reaction.

    PubMed

    Zhang, Qingfeng; Zhang, Cuiyun; Shahzad, Sohail Anjum; Yu, Cong

    2016-09-01

    A fluorescence turn-on assay was established for ALP (alkaline phosphatase) based on Cu(2+) catalyzed Fenton-like reaction and Graphene Oxide (GO). GO was utilized to quench the fluorescence of fluorescein (FAM) labeled single strand DNA (F-DNA). ALP can remove the phosphate group in sodium ascorbyl phosphate (SAP), and convert it into reducing ascorbate. Highly reactive hydroxyl radicals (·OH) were generated in the presence of ascorbate and Cu(2+) through the Fenton-like reaction. The reactive radicals generated in situ caused the cleavage of F-DNA into small fragments. When GO was added, the fluorescence emission of the sample without ALP was quenched and fluorescence emission recovered in the presence of ALP. The intensity of the recovered fluorescence was directly related to the concentration of ALP in the assay solution, and a sensitive and selective facile ALP assay is therefore established. PMID:27343614

  11. Magnetite solubility and phase stability in alkaline media at elevated temperatures

    SciTech Connect

    Ziemniak, S.E.; Jones, M.E.; Combs, K.E.S.

    1994-05-01

    Magnetite, Fe{sub 3}O{sub 4}, is the dominant oxide constituent of the indigenous corrosion layers that form on iron base alloys in high purity, high temperature water. The apparent simultaneous stability of two distinct oxidation states of iron in this metal oxide is responsible for its unique solubility behavior. The present work was undertaken to extend the experimental and theoretical bases for estimating solubilities of an iron corrosion product (Fe{sub 3}O{sub 4}/Fe(OH){sub 2}) over a broader temperature range and in the presence of complexing, pH-controlling reagents. These results indicate that a surface layer of ferrous hydroxide controls magnetite solubility behavior at low temperatures in much the same manner as a surface layer of nickel(II) hydroxide was previously reported to control the low temperature solubility behavior of NiO. The importance of Fe(III) ion complexes implies not only that most previously-derived thermodynamic properties of the Fe(OH){sub 3}{sup {minus}} ion are incorrect, but that magnetite phase stability probably shifts to favor a sodium ferric hydroxyphosphate compound in alkaline sodium phosphate solutions at elevated temperatures. The test methodology involved pumping alkaline solutions of known composition through a bed of Fe{sub 3}O{sub 4} granules and analyzing the emerging solution for Fe. Two pH-controlling reagents were tested: sodium phosphate and ammonia. Equilibria for the following reactions were described in thermodynamic terms: (a) Fe(OH){sub 2}/Fe{sub 3}O{sub 4} dissolution and transformation, (b) Fe(II) and Fe(III) ion hydroxocomplex formation (hydrolysis), (c) Fe(II) ion amminocomplex formation, and (d) Fe(II) and Fe(III) ion phosphatocomplex formation. 36 refs.

  12. Release of agronomical nutrient from zeolitite substrate containing phosphatic waste.

    PubMed

    Lancellotti, I; Toschi, T; Passaglia, E; Barbieri, L

    2014-12-01

    The principal plant nutrients are phosphorous, nitrogen and potassium. Among these compounds, phosphorous is the most critical: it reacts rapidly, becoming an insoluble compound. The combination of zeolitites with phosphate materials (zeoponic substrate) agrees to a gradual and controlled phosphorous release in soils: phosphorous for plant uptake is released by the combination of dissolution and ion-exchange reactions. Animal bone ashes, rich in phosphorous and leached alone, release little amounts of soluble phosphorous and a great deal of alkaline sodium and potassium. Concerning chabazitic-zeolitite, it encourages a both gradual and growing soluble phosphorous release from animal bone ashes, in accordance with clinoptilolitic- and phillipsitic-zeolitite abilities; in particular, that release increases, thanks to both a higher zeolitite/bone ash ratio and ammonium enrichment of zeolitite. The use of zeolitite is environmentally sustainable in Italy because large amounts of deposits of zeolitite were present in Italy. PMID:25056750

  13. Characterization of iron-phosphate-silicate chemical garden structures.

    PubMed

    Barge, Laura M; Doloboff, Ivria J; White, Lauren M; Stucky, Galen D; Russell, Michael J; Kanik, Isik

    2012-02-28

    Chemical gardens form when ferrous chloride hydrate seed crystals are added or concentrated solutions are injected into solutions of sodium silicate and potassium phosphate. Various precipitation morphologies are observed depending on silicate and phosphate concentrations, including hollow plumes, bulbs, and tubes. The growth of precipitates is controlled by the internal osmotic pressure, fluid buoyancy, and membrane strength. Additionally, rapid bubble-led growth is observed when silicate concentrations are high. ESEM/EDX analysis confirms compositional gradients within the membranes, and voltage measurements across the membranes during growth show a final potential of around 150-200 mV, indicating that electrochemical gradients are maintained across the membranes as growth proceeds. The characterization of chemical gardens formed with iron, silicate, and phosphate, three important components of an early earth prebiotic hydrothermal system, can help us understand the properties of analogous structures that likely formed at submarine alkaline hydrothermal vents in the Hadean-structures offering themselves as the hatchery of life. PMID:22035594

  14. Phosphate salts

    MedlinePlus

    ... as a laxative to clean the bowels before surgery or intestinal tests. Healthcare providers sometimes give potassium phosphate intravenously (by IV) for treating low phosphate and high calcium levels in the blood, and for preventing low phosphate in patients who are being tube-fed.

  15. International symposium on cellular and molecular biology of phosphate and phosphorylated compounds in microorganisms: Proceedings

    SciTech Connect

    1993-12-31

    This report contains the abstracts of papers presented at the conference. Attention is focused on the following topics: regulation of phosphate metabolism in bacteria; structure-function of alkaline phosphatase; regulation of phosphate metabolism in yeast; transport of phosphate and phosphorylated compounds; and phosphate regulation in pathogenesis and secondary metabolism.

  16. A Disposable Alkaline Phosphatase-Based Biosensor for Vanadium Chronoamperometric Determination

    PubMed Central

    Alvarado-Gámez, Ana Lorena; Alonso-Lomillo, María Asunción; Domínguez-Renedo, Olga; Arcos-Martínez, María Julia

    2014-01-01

    A chronoamperometric method for vanadium ion determination, based on the inhibition of the enzyme alkaline phosphatase, is reported. Screen-printed carbon electrodes modified with gold nanoparticles were used as transducers for the immobilization of the enzyme. The enzymatic activity over 4-nitrophenyl phosphate sodium salt is affected by vanadium ions, which results in a decrease in the chronoamperometric current registered. The developed method has a detection limit of 0.39 ± 0.06 μM, a repeatability of 7.7% (n = 4) and a reproducibility of 8% (n = 3). A study of the possible interferences shows that the presence of Mo(VI), Cr(III), Ca(II) and W(VI), may affect vanadium determination at concentration higher than 1.0 mM. The method was successfully applied to the determination of vanadium in spiked tap water. PMID:24569772

  17. Chloride- and alkali-containing calcium phosphates as basic materials to prepare calcium phosphate cements.

    PubMed

    Bermúdez, O; Boltong, M G; Driessens, F C; Ginebra, M P; Fernández, E; Planell, J A

    1994-10-01

    Combinations of an alkali-containing calcium phosphate-like rhenanite, sodium whitlockite or calcium potassium phosphate and a chloride-containing calcium phosphate-like spodiosite or chloroapatite with or without additions of other calcium phosphates like monocalcium phosphate monohydrate, dicalcium phosphate or dicalcium phosphate dihydrate were made and mixed with water into pastes. The setting time of these pastes was determined. After soaking for a day in Ringer's solution at 37 degrees C the compressive strength and the diametral tensile strength were determined. Two of the combinations tried in this study resulted in the formation of cements at room temperature. One cement was of the type dicalcium phosphate, whereas the other gave octocalcium phosphate as the solid reaction product. The byproducts formed were an aqueous solution of NaCl and one of K2HPO4, respectively. Applications for bone repair and augmentation are envisaged. PMID:7841290

  18. The type III transporters (PiT-1 and PiT-2) are the major sodium-dependent phosphate transporters in the mice and human brains.

    PubMed

    Inden, Masatoshi; Iriyama, Masaki; Zennami, Miho; Sekine, Shin-Ichiro; Hara, Akira; Yamada, Mitsunori; Hozumi, Isao

    2016-04-15

    PiT-1/SLC20A1 and PiT-2/SLC20A2 are members of the mammalian type-III inorganic phosphate (Pi) transporters encoded by the SLC20 genes. The broad distribution of SLC20A1 and SLC20A2 mRNAs in mammalian tissues is compatible with housekeeping maintenace of intracellular Pi homeostasis by transporting Pi from intrastitial fluid for normal cellular functions. Recently, mutations of SLC20A2 have been found in patients with idiopathic basal ganglia calcification (IBGC), also known as Fahr's disease. However, the localization of PiT-1 and PiT-2 in the normal brain has not been clarified yet. The aim of this study was to reveal the distribution of PiT-1 and PiT-2 in the mouse and human brains. As results, gene expressing analysis showed that SLC20A1 and SLC20A2 mRNAs were widely expressed throughout the mouse and human brains, although other Pi transporters encoded by SLC17 and SLC34 mRNAs were hardly detected. The region of cerebellum contained a higher level of SLC20A1 and SLC20A2 mRNAs than the other brain regions. Additionally, the cerebellum in the mouse brain contained higher levels of PiT-1 and PiT-2 than those in the other regions in the brain, respectively. The immonohistochemical studies showed that PiT-1 was recognized in neuron, astrocytes and vascular endothelial cells. Similarly to PiT-1 immunopositivity, PiT-2 was clearly recognized in these cells. These results suggest that SLC20 family plays a pivotal role in the maintenance of cellular Pi homeostasis particullary in the brain. The viewpoint is compatible with the finding that calcification in IBGC is recognized only in the brain. This provides us with a novel viewpoint to understand the basic pathophysiology of IBGC through type-III Pi transporters. PMID:26923164

  19. Proton/Phosphate Stoichiometry in Uptake of Inorganic Phosphate by Cultured Cells of Catharanthus roseus (L.) G. Don

    PubMed Central

    Sakano, Katsuhiro

    1990-01-01

    Upon absorption of phosphate, cultured cells of Catharanthus roseus (L.) G. Don caused a rapid alkalinization of the medium in which they were suspended. The alkalinization continued until the added phosphate was completely exhausted from the medium, at which time the pH of the medium started to drop sharply toward the original pH value. Phosphate exposure caused the pH of the medium to increase from pH 3.5 to values as high as 5.8, while the rate of phosphate uptake was constant throughout (10-17 micromoles per hour per gram fresh weight). This indicates that no apparent pH optimum exists for the phosphate uptake by the cultured cells. The amount of protons cotransported with phosphate was calculated from the observed pH change up to the maximum alkalinization and the titration curve of the cell suspension. Proton/phosphate transport stoichiometry ranged from less than unity to 4 according to the amount of phosphate applied. At low phosphate doses, the stoichiometries were close to 4, while at high phosphate doses, smaller stoichiometries were observed. This suggests that, at high phosphate doses, activation of the proton pump is induced by the longer lasting proton influx acidifying the cytoplasm. The increased H+ efflux due to the proton pump could partially compensate protons taken up via the proton-phosphate cotransport system. Thus, the H+/H2PO4− stoichiometry of the cotransport is most likely to be 4. PMID:16667491

  20. Monte Carlo simulations of phosphate polyhedron connectivity in glasses

    SciTech Connect

    ALAM,TODD M.

    2000-01-01

    Monte Carlo simulations of phosphate tetrahedron connectivity distributions in alkali and alkaline earth phosphate glasses are reported. By utilizing a discrete bond model, the distribution of next-nearest neighbor connectivities between phosphate polyhedron for random, alternating and clustering bonding scenarios was evaluated as a function of the relative bond energy difference. The simulated distributions are compared to experimentally observed connectivities reported for solid-state two-dimensional exchange and double-quantum NMR experiments of phosphate glasses. These Monte Carlo simulations demonstrate that the polyhedron connectivity is best described by a random distribution in lithium phosphate and calcium phosphate glasses.

  1. Monte Carlo Simulations of Phosphate Polyhedron Connectivity in Glasses

    SciTech Connect

    ALAM,TODD M.

    1999-12-21

    Monte Carlo simulations of phosphate tetrahedron connectivity distributions in alkali and alkaline earth phosphate glasses are reported. By utilizing a discrete bond model, the distribution of next-nearest neighbor connectivities between phosphate polyhedron for random, alternating and clustering bonding scenarios was evaluated as a function of the relative bond energy difference. The simulated distributions are compared to experimentally observed connectivities reported for solid-state two-dimensional exchange and double-quantum NMR experiments of phosphate glasses. These Monte Carlo simulations demonstrate that the polyhedron connectivity is best described by a random distribution in lithium phosphate and calcium phosphate glasses.

  2. ALP (Alkaline Phosphatase) Test

    MedlinePlus

    ... known as: ALK PHOS; Alkp Formal name: Alkaline Phosphatase Related tests: AST ; ALT ; GGT ; Bilirubin ; Liver Panel ; Bone Markers ; Alkaline Phosphatase Isoenzymes; Bone Specific ALP All content on Lab ...

  3. Performed surfactant-optimized aqueous alkaline flood

    SciTech Connect

    Thigpen, D.R.; Lawson, J.B.; Nelson, R.C.

    1991-11-26

    This paper describes improvement in a process for recovering oil from an acidic oil reservoir by injecting an aqueous alkaline solution comprising water, sodium chloride, and alkaline material for reacting with the reservoir oil forming a petroleum acid soap to form an in-situ surfactant system. The improvement comprises: selecting a preformed cosurfactant which is soluble in both the aqueous solution and the reservoir oil and has a solubility ratio which is grater than the solubility ratio of the petroleum acid soap where the solubility ratio is the ratio of solubility in the aqueous alkaline solution to the solubility in the reservoir oil; combining with the alkaline solution an amount of the preformed cosurfactant which will result in the in-situ surfacant system having a salinity about equal to a salinity which results in minimal interfacial tension between the oil in the reservoir and the in-situ surfactant system at reservoir temperature, wherein the amount of the preformed cosurfactant is about 0.3 percent by weight in the aqueous alkaline solution; and injecting the cosurfactant-aqueous alkaline solution mixture into the reservoir to displace oil toward a fluid production location.

  4. BIOLOGICAL ELECTRODES SPECIFIC FOR PHOSPHATE AND NITRITE IONS

    EPA Science Inventory

    Biological electrodes have been developed for the selective analysis of phosphate and nitrate ions at micro-levels. A phosphate electrode was constructed by using two enzymes, alkaline phosphatase and glucose oxidase which were immobilized and mounted on the surface of the Platin...

  5. Alkaline flooding for enhanced oil recovery

    SciTech Connect

    Gittler, W.E.

    1983-09-01

    There are over 12 active projects of varying size using one of 3 major types of alkaline agents. These include sodium silicate, caustic soda, and soda ash. Among the largest pilots currently is the THUMS project in the Wilmington field, California. Plans called for the injection of a 4% weight concentration of sodium orthosilicate over a 60% PV. Through the first 3 yr, over 27 million bbl of chemicals have been injected. Gulf Oil is operating several alkaline floods, one of which is located off shore in the Quarantine Bay field, Louisiana. In this pilot, sodium hydroxide in a weight concentration of 5 to 12% is being injected. Belco Petroleum Corp. has reported that their pilot operating in the Isenhour Unit in Wyoming is using a .5% weight concentration of soda ash in conjunction with a polymer. Other uses for alkaline agents in chemical flooding include the use of silicate as a preflush or sacrificial agent in micellar/polymer and surfactant recovery systems. In addition, caustic has been tested in the surface-mixed caustic emulsion process while orthosilicate has been tested in a recovery method known as mobility-controlled caustic floods.

  6. 21 CFR 184.1769a - Sodium metasilicate.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Sodium metasilicate. 184.1769a Section 184.1769a... GRAS § 184.1769a Sodium metasilicate. (a) Sodium metasilicate (CAS Reg. No. 6834-92-0) is a strongly alkaline white powder. It does not occur naturally but rather is synthesized by melting sand with...

  7. Availability of phosphorus from selected inorganic phosphate to juvenile abalone, Haliotis discus hannai ino.

    NASA Astrophysics Data System (ADS)

    Bei-Ping, Tan; Kang-Sen, Mai; Wei, Xu

    2002-06-01

    The availability of phosphorus to juvenile abalone, Haliotis discus hannai from primary, secondary and tertiary calcium phosphate, primary sodium or potassium phosphate separately or in combination was determined in a 120-day feeding trial. Seven semi-purified diets were formulated to contain relatively constant dietary phosphorus, ranging from 0.78%-0.82%. The concentrations of dietary phosphorus were presumed to be slightly below the requirement for abalone. A brown alga, Laminaria japonica, was used as a control diet. Abalone juveniles of silimar size (average weight 1.18 g; average shell length 18.74 mm) were distributed in a single-pass, flow-through system using a completely randomized design with eight treatments and three replicates each treatment. The survival ranged from 71.1% to 81.1%, and was not significantly (P>0.05) related to dietary treatment. However, the weight gain rate (41.72%-65.02%), daily increment in shell length (36.87-55.07 μm) and muscle RNA-DNA ratio (3.44-4.69) were significantly (P<0.05) affected by dietary treatment. Soft body alkaline phosphatase activity (10.9-19.8 U/g wet tissue) and carcass levels of lipid (7.71%-9.33%) and protein (46.68%-49.35%) were significantly (P<0.05) responsive to available phosphorus of the diets. Dietary treatment had significant effect (P<0.05) on concentrations of phosphorus in the whole body (WB) and soft body (SB). Apparent digestibility coefficients (45%-97%) of phosphorus were also significantly (P<0.05) different between dietary treatments. The results indicated that among these inorganic compounds, primary calcium, potassium and sodium phosphates separately or in combination could be utilized effectively by juvenile abalone as dietary phosphorus sources (availability ranging from 87%-97%). However, secondary and tertiary calcium phosphates were found to be low in availability, the values being 45% and 77%, repectively.

  8. Inhibition of acid, alkaline, and tyrosine (PTP1B) phosphatases by novel vanadium complexes.

    PubMed

    McLauchlan, Craig C; Hooker, Jaqueline D; Jones, Marjorie A; Dymon, Zaneta; Backhus, Emily A; Greiner, Bradley A; Dorner, Nicole A; Youkhana, Mary A; Manus, Lisa M

    2010-03-01

    In the course of our investigations of vanadium-containing complexes for use as insulin-enhancing agents, we have generated a series of novel vanadium coordination complexes with bidentate ligands. Specifically we have focused on two ligands: anthranilate (anc(-)), a natural metabolite of tryptophan, and imidizole-4-carboxylate (imc(-)), meant to mimic naturally occurring N-donor ligands. For each ligand, we have generated a series of complexes containing the V(III), V(IV), and V(V) oxidation states. Each complex was investigated using phosphatase inhibition studies of three different phosphatases (acid, alkaline, and tyrosine (PTP1B) phosphatase) as prima facia evidence for potential use as an insulin-enhancing agent. Using p-nitrophenyl phosphate as an artificial phosphatase substrate, the levels of inhibition were determined by measuring the absorbance of the product at 405nm using UV/vis spectroscopy. Under our experimental conditions, for instance, V(imc)(3) appears to be as potent an inhibitor of alkaline phosphatase as sodium orthovanadate when comparing the K(cat)/K(m) term. VO(anc)(2) is as potent an inhibitor of acid phosphatase and tyrosine phosphatase as the Na(3)VO(4). Thus, use of these complexes can increase our mechanistic understanding of the effects of vanadium in vivo. PMID:20071031

  9. Alkaline "Permanent" Paper.

    ERIC Educational Resources Information Center

    Pacey, Antony

    1991-01-01

    Discussion of paper manufacturing processes and their effects on library materials focuses on the promotion of alkaline "permanent" paper, with less acid, by Canadian library preservation specialists. Standards for paper acidity are explained; advantages of alkaline paper are described, including decreased manufacturing costs; and recyclability is…

  10. Anodes for alkaline electrolysis

    DOEpatents

    Soloveichik, Grigorii Lev

    2011-02-01

    A method of making an anode for alkaline electrolysis cells includes adsorption of precursor material on a carbonaceous material, conversion of the precursor material to hydroxide form and conversion of precursor material from hydroxide form to oxy-hydroxide form within the alkaline electrolysis cell.

  11. Rebmab200, a humanized monoclonal antibody targeting the sodium phosphate transporter NaPi2b displays strong immune mediated cytotoxicity against cancer: a novel reagent for targeted antibody therapy of cancer.

    PubMed

    Lopes dos Santos, Mariana; Yeda, Fernanda Perez; Tsuruta, Lilian Rumi; Horta, Bruno Brasil; Pimenta, Alécio A; Degaki, Theri Leica; Soares, Ibere C; Tuma, Maria Carolina; Okamoto, Oswaldo Keith; Alves, Venancio A F; Old, Lloyd J; Ritter, Gerd; Moro, Ana Maria

    2013-01-01

    NaPi2b, a sodium-dependent phosphate transporter, is highly expressed in ovarian carcinomas and is recognized by the murine monoclonal antibody MX35. The antibody had shown excellent targeting to ovarian cancer in several early phase clinical trials but being murine the antibody's full therapeutic potential could not be explored. To overcome this impediment we developed a humanized antibody version named Rebmab200, expressed in human PER.C6® cells and cloned by limiting dilution. In order to select a clone with high therapeutic potential clones were characterized using a series of physicochemical assays, flow cytometry, real-time surface plasmon resonance, glycosylation analyses, immunohistochemistry, antibody-dependent cell-mediated cytotoxicity, complement-dependent-cytotoxicity assays and quantitative PCR. Comparative analyses of Rebmab200 and MX35 monoclonal antibodies demonstrated that the two antibodies had similar specificity for NaPi2b by flow cytometry with a panel of 30 cell lines and maintained similar kinetic parameters. Robust and high producer cell clones potentially suitable for use in manufacturing were obtained. Rebmab200 antibodies were assessed by immunohistochemistry using a large panel of tissues including human carcinomas of ovarian, lung, kidney and breast origin. An assessment of its binding towards 33 normal human organs was performed as well. Rebmab200 showed selected strong reactivity with the tested tumor types but little or no reactivity with the normal tissues tested confirming its potential for targeted therapeutics strategies. The remarkable cytotoxicity shown by Rebmab200 in OVCAR-3 cells is a significant addition to the traits of stability and productivity displayed by the top clones of Rebmab200. Antibody-dependent cell-mediated toxicity functionality was confirmed in repeated assays using cancer cell lines derived from ovary, kidney and lung as targets. To explore use of this antibody in clinical trials, GMP production of Rebmab

  12. Alkaline igneous rocks

    SciTech Connect

    Fitton, J.G.; Upton, B.G.J.

    1987-01-01

    In this volume, an international team of scientists provides an up-to-date overview of the nature, origin, and evolution of alkaline magmas. Particular attention is paid to carbonatites, lamprophyres, and lamproites which are rock suites of current interest not recently reviewed elsewhere. Recent work on the classical alkaline provinces of East Africa, South Greenland, and the Kola Peninsula is included together with reviews of other areas of alkaline magmatism in North and South America, East Greenland, Europe, West Africa, and the ocean basins. Other papers discuss the impact of experimental isotopic and geochemical studies of the petrogenesis of alkaline rocks. This book will be of interest to petrologists and geochemists studying alkaline igneous rocks, and to other earth scientists as a reference on the rapidly expanding field of igneous petrology.

  13. Surfactant-enhanced low-pH alkaline flooding

    SciTech Connect

    Peru, D.A. and Co., Columbia, MD . Research Div.); Lorenz, P.B. )

    1990-08-01

    This paper reports sodium bicarbonate investigated as a potential alkaline agent in surfactant-enhanced alkaline flooding because it has very little tendency to dissolve silicate minerals. In experiments performed with Wilmington, CA, crude oil and three types of surfactants, the bicarbonate/surfactant combination caused a marked lowering of interfacial tension (IFT). Bicarbonate protected the surfactant against divalent cations and reduced adsorption of surfactant and polymer on various minerals. Coreflood test confirm that sodium bicarbonate plus surfactant can be an effective alternative to the high-pH flooding process.

  14. Chemostat Culture of Escherichia coli K-12 Limited by the Activity of Alkaline Phosphatase

    PubMed Central

    King, Stagg L.; Francis, J. C.

    1975-01-01

    The growth-limiting reaction of a chemostat culture of Escherichia coli K-12 was the hydrolysis of β-glycerophosphate by alkaline phosphatase. The culture was buffered at pH 5.2 where alkaline phosphatase was unable to supply phosphate to the cell at a rate sufficient to sustain the maximum rate of growth. Alkaline phosphatase activity in this system is discussed in terms of the so-called Flip-Flop mechanism. PMID:240310

  15. Reductive dechlorination of carbon tetrachloride using buffered alkaline ascorbic acid.

    PubMed

    Lin, Ya-Ting; Liang, Chenju

    2015-10-01

    Alkaline ascorbic acid (AA) was recently discovered as a novel in-situ chemical reduction (ISCR) reagent for remediating chlorinated solvents in the subsurface. For this ISCR process, the maintenance of an alkaline pH is essential. This study investigated the possibility of the reduction of carbon tetrachloride (CT) using alkaline AA solution buffered by phosphate and by NaOH. The results indicated that CT was reduced by AA, and chloroform (CF) was a major byproduct at a phosphate buffered pH of 12. However, CT was completely reduced by AA in 2M NaOH without CF formation. In the presence of iron/soil minerals, iron could be reduced by AA and Fe(2+) tends to precipitate on the mineral surface to accelerate CT degradation. A simultaneous transfer of hydrogenolysis and dichloroelimination would occur under phosphate buffered pH 12. This implies that a high alkaline environment is a crucial factor for maintaining the dominant pathway of two electron transfer from dianionic AA to dehydroascorbic acid, and to undergo dichloroelimination of CT. Moreover, threonic acid and oxalic acid were identified to be the major AA decomposition products in alkaline solutions. PMID:25912910

  16. Mineral induced formation of sugar phosphates

    NASA Astrophysics Data System (ADS)

    Pitsch, S.; Eschenmoser, A.; Gedulin, B.; Hui, S.; Arrhenius, G.

    1995-08-01

    Glycolaldehyde phosphate, sorbed from highly dilute, weakly alkaline solution into the interlayer of common expanding sheet structure metal hydroxide minerals, condenses extensively to racemic aldotetrose-2,4-diphosphates and aldohexose-2,4,6-triphosphates. The reaction proceeds mainly through racemic erythrose-2,4-phosphate, and terminates with a large fraction of racemic altrose-2,4,6-phosphate. In the absence of an inductive mineral phase, no detectable homogeneous reaction takes place in the concentration- and pH range used. The reactant glycolaldehyde phosphate is practically completely sorbed within an hour from solutions with concentrations as low as 50 µm; the half-time for conversion to hexose phosphates is of the order of two days at room temperature and pH 9.5. Total production of sugar phosphates in the mineral interlayer is largely independent of the glycolaldehyde phosphate concentration in the external solution, but is determined by the total amount of GAP offered for sorption up to the capacity of the mineral. In the presence of equimolar amounts of rac-glyceraldehyde-2-phosphate, but under otherwise similar conditions, aldopentose-2,4,-diphosphates also form, but only as a small fraction of the hexose-2,4,6-phosphates.

  17. Mineral induced formation of sugar phosphates

    NASA Technical Reports Server (NTRS)

    Pitsch, S.; Eschenmoser, A.; Gedulin, B.; Hui, S.; Arrhenius, G.

    1995-01-01

    Glycolaldehyde phosphate, sorbed from highly dilute, weakly alkaline solution into the interlayer of common expanding sheet structure metal hydroxide minerals, condenses extensively to racemic aldotetrose-2, 4-diphophates, and aldohexose-2, 4, 6-triphosphates. The reaction proceeds mainly through racemic erythrose-2, 4-phosphate, and terminates with a large fraction of racemic altrose-2, 4, 6-phosphate. In the absence of an inductive mineral phase, no detectable homogeneous reaction takes place in the concentration- and pH range used. The reactant glycolaldehyde phosphate is practically completely sorbed within an hour from solutions with concentrations as low as 50 micron; the half-time for conversion to hexose phosphates is of the order of two days at room temperature and pH 9.5. Total production of sugar phosphates in the mineral interlayer is largely independent of the glycolaldehyde phosphate concentration in the external solution, but is determined by the total amount of GAP offered for sorption up to the capacity of the mineral. In the presence of equimolar amounts of rac-glyceraldehyde-2-phosphate, but under otherwise similar conditions, aldopentose-2, 4, -diphosphates also form, but only as a small fraction of the hexose-2, 4, 6-phosphates.

  18. Size-exclusion chromatography of biological samples which contain extremely alkaline proteins.

    PubMed

    Hayakawa, Kou; Guo, Lei; Terentyeva, Elena A; Li, Xiao Kang; Kimura, Hiromitsu; Hirano, Masahiko; Yoshikawa, Kazuyuki; Yoshinaga, Teruo; Nagamine, Takeaki; Katsumata, Noriyuki; Tanaka, Toshiaki

    2003-06-30

    An improved size-exclusion chromatography (SEC) was developed to isolate extremely basic (alkaline) proteins, such as trypsin (pI=10.5), lysozyme (pI=11), and histone (pI=10.8). Develosil 300 Diol-5 (300 x 8 mm I.D., 30 nm average pore diameter) column was used with an eluent of 0.1 M sodium phosphate, 1.5 M sodium chloride, glycerol (40%, v/v), 2-propanol (10%, v/v), and Brij-58 (1%, v/v). Under these conditions, the final apparent pH becomes to 4.0, and pH adjustment is not necessary. Column temperature and flow rate were 15 degrees C and 0.2 ml/min, respectively. This elution system is stable and reliable, and applications onto human pancreatic juice, human bile, and tissue homogenates were successfully achieved. Since this system is convenient for protein analysis, it is expected to be generally applicable to clinical and biochemical research for identifying protein components in combination with microsequencing. PMID:12834974

  19. Alkaline battery operational methodology

    DOEpatents

    Sholklapper, Tal; Gallaway, Joshua; Steingart, Daniel; Ingale, Nilesh; Nyce, Michael

    2016-08-16

    Methods of using specific operational charge and discharge parameters to extend the life of alkaline batteries are disclosed. The methods can be used with any commercial primary or secondary alkaline battery, as well as with newer alkaline battery designs, including batteries with flowing electrolyte. The methods include cycling batteries within a narrow operating voltage window, with minimum and maximum cut-off voltages that are set based on battery characteristics and environmental conditions. The narrow voltage window decreases available capacity but allows the batteries to be cycled for hundreds or thousands of times.

  20. Sodium Test

    MedlinePlus

    ... be limited. Home Visit Global Sites Search Help? Sodium Share this page: Was this page helpful? Also known as: Na Formal name: Sodium Related tests: Chloride , Bicarbonate , Potassium , Electrolytes , Osmolality , Basic ...

  1. Biodegradable IPN hydrogel beads of pectin and grafted alginate for controlled delivery of diclofenac sodium.

    PubMed

    Giri, Tapan Kumar; Thakur, Deepa; Alexander, Amit; Ajazuddin; Badwaik, Hemant; Tripathy, Minaketan; Tripathi, Dulal Krishna

    2013-05-01

    A novel diclofenac sodium (DS) loaded interpenetrating polymer network (IPN) beads of pectin and hydrolyzed polyacrylamide-graft-sodium alginate (PAAm-g-SA) was developed through ionotropic gelation and covalent cross-linking. The graft copolymer was synthesized by free radical polymerization under the nitrogen atmosphere followed by alkaline hydrolysis. The grafting, alkaline hydrolysis, and characterization of beads were confirmed by Fourier transforms infrared spectroscopy. The crystalline structure of drug after encapsulation into IPN beads were evaluated by differential scanning colorimetry and X-ray diffraction analyses. DS encapsulation was up to 96.45 %. The effect of hydrolyzed graft copolymer/pectin ratios and glutaraldehyde concentration on drug release in acidic and phosphate buffer solutions were investigated. The release of drug was significantly increased with increase of pH. The release of drug depends on the extent of cross-linking. The results indicated that IPN beads of hydrolyzed PAAm-g-SA and pectin could be used for sustained release of DS. PMID:23423649

  2. Elucidating the individual effects of calcium and phosphate ions on hMSCs by using composite materials.

    PubMed

    Danoux, Charlène B S S; Bassett, David C; Othman, Ziryan; Rodrigues, Ana I; Reis, Rui L; Barralet, Jake E; van Blitterswijk, Clemens A; Habibovic, Pamela

    2015-04-01

    The biological performance of bone graft substitutes based on calcium phosphate bioceramics is dependent on a number of properties including chemical composition, porosity and surface micro- and nanoscale structure. However, in contemporary bioceramics these properties are interlinked, therefore making it difficult to investigate the individual effects of each property on cell behavior. In this study we have attempted to investigate the effects of calcium and inorganic phosphate ions independent from one another by preparing composite materials with polylactic acid (PLA) as a polymeric matrix and calcium carbonate or sodium phosphate salts as fillers. Clinically relevant bone marrow derived human mesenchymal stromal cells (hMSCs) were cultured on these composites and proliferation, osteogenic differentiation and ECM mineralization were investigated with time and were compared to plain PLA control particles. In parallel, cells were also cultured on conventional cell culture plates in media supplemented with calcium or inorganic phosphate to study the effect of these ions independent of the 3D environment created by the particles. Calcium was shown to increase proliferation of cells, whereas both calcium and phosphate positively affected alkaline phosphatase enzyme production. QPCR analysis revealed positive effects of calcium and of inorganic phosphate on the expression of osteogenic markers, in particular bone morphogenetic protein-2 and osteopontin. Higher levels of mineralization were also observed upon exposure to either ion. Effects were similar for cells cultured on composite materials and those cultured in supplemented media, although ion concentrations in the composite cultures were lower. The approach presented here may be a valuable tool for studying the individual effects of a variety of soluble compounds, including bioinorganics, without interference from other material properties. PMID:25676583

  3. Survival and stress responses of E. coli exposed to alkaline cleaners

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Studies were undertaken to evaluate the effects of alkaline cleaners commonly used in food processing environments on survival and stress responses of the foodborne pathogen Escherichia coli O157:H7. Alkaline cleaners containing either sodium hydroxide or potassium hydroxide and hypochlorite had gre...

  4. Kinetics of the alkaline hydrolysis of nitrocellulose.

    PubMed

    Christodoulatos, C; Su, T L; Koutsospyros, A

    2001-01-01

    Cellulose nitrate (nitrocellulose) is an explosive solid substance used in large quantities in various formulations of rocket and gun propellants. Safe destruction of nitrocellulose can be achieved by alkaline hydrolysis, which converts it to biodegradable products that can then be treated by conventional biological processes. The kinetics of the alkaline hydrolysis of munitions-grade nitrocellulose in sodium hydroxide solutions were investigated in completely mixed batch reactors. Experiments were conducted using solutions of alkaline strength ranging from 0.1 to 15% by mass and temperatures in the range of 30 to 90 degrees C. Regression analysis of the kinetic data revealed that alkaline hydrolysis of nitrocellulose is of the order 1.0 and 1.5 with respect to nitrocellulose and hydroxide concentration, respectively. The activation energy of the hydrolysis reaction was found to be 100.9 kJ/mol with a preexponential Arrhenius constant of 4.73 x 10(13). Nitrite and nitrate, in a 3:1 ratio, were the primary nitrogen species present in the posthydrolysis solution. The kinetic information is pertinent to the development and optimization of nitrocellulose chemical-biological treatment systems. PMID:11563378

  5. Alkaline extraction of phenolic compounds from intact sorghum kernels

    Technology Transfer Automated Retrieval System (TEKTRAN)

    An aqueous sodium hydroxide solution was employed to extract phenolic compounds from whole grain sorghum without decortication or grinding as determined by Oxygen Radical Absorbance Capacity (ORAC). The alkaline extract ORAC values were more stable over 32 days compared to neutralized and freeze dri...

  6. Release of bound procyanidins from cranberry pomace by alkaline hydrolysis

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Procyanidins in plant products are present as extractable or unextractable/bound forms. We optimized alkaline hydrolysis conditions to liberate bound procyanidins from dried cranberry pomace. Five mL of sodium hydroxide (2, 4, or 6N) was added to 0.5 g of cranberry pomace in screw top glass tubes,...

  7. Enhanced colonic tumorigenesis in alkaline sphingomyelinase (NPP7) knockout mice.

    PubMed

    Chen, Ying; Zhang, Ping; Xu, Shu-Chang; Yang, Liping; Voss, Ulrikke; Ekblad, Eva; Wu, Yunjin; Min, Yalan; Hertervig, Erik; Nilsson, Åke; Duan, Rui-Dong

    2015-01-01

    Intestinal alkaline sphingomyelinase (alk-SMase) generates ceramide and inactivates platelet-activating factor (PAF) and was previously suggested to have anticancer properties. The direct evidence is still lacking. We studied colonic tumorigenesis in alk-SMase knockout (KO) mice. Formation of aberrant crypt foci (ACF) was examined after azoxymethane (AOM) injection. Tumor was induced by AOM alone, a conventional AOM/dextran sulfate sodium (DSS) treatment, and an enhanced AOM/DSS method. β-Catenin was determined by immunohistochemistry, PAF levels by ELISA, and sphingomyelin metabolites by mass spectrometry. Without treatment, spontaneous tumorigenesis was not identified but the intestinal mucosa appeared thicker in KO than in wild-type (WT) littermates. AOM alone induced more ACF in KO mice but no tumors 28 weeks after injection. However, combination of AOM/DSS treatments induced colonic tumors and the incidence was significantly higher in KO than in WT mice. By the enhanced AOM/DSS method, tumor number per mouse increased 4.5 times and tumor size 1.8 times in KO compared with WT mice. Although all tumors were adenomas in WT mice, 32% were adenocarcinomas in KO mice. Compared with WT mice, cytosol expression of β-catenin was significantly increased and nuclear translocation in tumors was more pronounced in KO mice. Lipid analysis showed decreased ceramide in small intestine and increased sphingosine-1-phosphate (S1P) in both small intestine and colon in nontreated KO mice. PAF levels in feces were significantly higher in the KO mice after AOM/DSS treatment. In conclusion, lack of alk-SMase markedly increases AOM/DSS-induced colonic tumorigenesis associated with decreased ceramide and increased S1P and PAF levels. PMID:25381265

  8. Fabrication of Poly-l-lactic Acid/Dicalcium Phosphate Dihydrate Composite Scaffolds with High Mechanical Strength—Implications for Bone Tissue Engineering

    PubMed Central

    Tanataweethum, Nida; Liu, Wai Ching; Scott Goebel, W.; Li, Ding; Chu, Tien Min

    2015-01-01

    Scaffolds were fabricated from poly-l-lactic acid (PLLA)/dicalcium phosphate dihydrate (DCPD) composite by indirect casting. Sodium citrate and PLLA were used to improve the mechanical properties of the DCPD scaffolds. The resulting PLLA/DCPD composite scaffold had increased diametral tensile strength and fracture energy when compared to DCPD only scaffolds (1.05 vs. 2.70 MPa and 2.53 vs. 12.67 N-mm, respectively). Sodium citrate alone accelerated the degradation rate by 1.5 times independent of PLLA. Cytocompatibility of all samples were evaluated using proliferation and differentiation parameters of dog-bone marrow stromal cells (dog-BMSCs). The results showed that viable dog-BMSCs attached well on both DCPD and PLLA/DCPD composite surfaces. In both DCPD and PLLA/DCPD conditioned medium, dog-BMSCs proliferated well and expressed alkaline phosphatase (ALP) activity indicating cell differentiation. These findings indicate that incorporating both sodium citrate and PLLA could effectively improve mechanical strength and biocompatibility without increasing the degradation time of calcium phosphate cement scaffolds for bone tissue engineering purposes. PMID:26556380

  9. Ureaplasma urealyticum-induced crystallization of magnesium ammonium phosphate and calcium phosphates in synthetic urine.

    PubMed

    Grenabo, L; Brorson, J E; Hedelin, H; Pettersson, S

    1984-10-01

    Crystallization of struvite and calcium phosphates was studied in vitro as encrustations on glass rods immersed in synthetic urine, to evaluate the crystallization capacity of Ureaplasma urealyticum and compare it with that of known urease and non-urease-producing bacteria. Inoculation of the synthetic urine with Ureaplasma urealyticum resulted in alkalinization of the synthetic urine and crystallization of struvite and brushite. Inoculation with Proteus mirabilis caused a faster and more pronounced alkalinization as well as crystallization of struvite and apatite. The alkalinization and crystallization caused by Ureaplasma urealyticum and Proteus mirabilis was completely prevented by acetohydroxamic acid, a potent urease inhibitor, linking the crystallization to the urease activity of the microorganisms. When the synthetic urine was inoculated with urease-negative Escherichia coli no alkalinization and no crystallization were seen. PMID:6381769

  10. Phosphatidylinositol anchor of HeLa cell alkaline phosphatase

    SciTech Connect

    Jemmerson, R.; Low, M.G.

    1987-09-08

    Alkaline phosphatase from cancer cells, HeLa TCRC-1, was biosynthetically labeled with either /sup 3/H-fatty acids or (/sup 3/H)ethanolamine as analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and fluorography of immunoprecipitated material. Phosphatidylinositol-specific phospholipase C (PI-PLC) released a substantial proportion of the /sup 3/H-fatty acid label from immunoaffinity-purified alkaline phosphatase but had no effect on the radioactivity of (/sup 3/H)ethanolamine-labeled material. PI-PLC also liberated catalytically active alkaline phosphatase from viable cells, and this could be selectively blocked by monoclonal antibodies to alkaline phosphatase. However, the alkaline phosphatase released from /sup 3/H-fatty acid labeled cells by PI-PLC was not radioactive. By contrast, treatment with bromelain removed both the /sup 3/H-fatty acid and the (/sup 3/H)ethanolamine label from purified alkaline phosphatase. Subtilisin was also able to remove the (/sup 3/H)ethanolamine label from the purified alkaline phosphatase. The /sup 3/H radioactivity in alkaline phosphatase purified from (/sup 3/H)ethanolamine-labeled cells comigrated with authentic (/sup 3/H)ethanolamine by anion-exchange chromatography after acid hydrolysis. The data suggest that the /sup 3/H-fatty acid and (/sup 3/H)ethanolamine are covalently attached to the carboxyl-terminal segment since bromelain and subtilisin both release alkaline phosphatase from the membrane by cleavage at that end of the polypeptide chain. The data are consistent with findings for other proteins recently shown to be anchored in the membrane through a glycosylphosphatidylinositol structure and indicate that a similar structure contributes to the membrane anchoring of alkaline phosphatase.

  11. A soluble alkaline phosphatase from Bacillus licheniformis MC14. Histochemical localization, purification, characterization and comparison with the membrane-associated alkaline phosphatase.

    PubMed

    Hansa, J G; Laporta, M; Kuna, M A; Reimschuessel, R; Hulett, F M

    1981-02-13

    Growth conditions affect the quantity and distribution of alkaline phosphatase (orthophosphoric-monoester phosphohydrolase (alkaline optimum), EC 3.1.3.1) in Bacillus licheniformis MC14. The soluble alkaline phosphatase, which has been found in biochemical localization studies between the cell wall and cell membrane (Glynn, J.A., Schaffel, S.D., McNicholas, J.M. and Hulett, F.M. (1977) J. Bacteriol. 129, 1010-1019), was localized via electron microscope histochemistry in cells cultured under conditions which result in increased quantities of this activity. This soluble alkaline phosphatase was stabilized with 20% glycerol and purified to homogeneity as determined by sodium dodecyl sulfate(SDS)-polyacrylamide gel electrophoresis. The purified enzyme is soluble in dilute buffer. This soluble alkaline phosphatase has been characterized and compared to the membrane-associated alkaline phosphatase from this organism. PMID:6783099

  12. Alkaline flooding injection strategy

    SciTech Connect

    French, T.R.; Josephson, C.B.

    1992-03-01

    The objective of this project is to improved alkali-surfactant flooding methods, and this includes determining the proper design of injection strategy. Several different injection strategies have been used or suggested for recovering heavy oils with surfactant-enhanced alkaline flooding methods. Oil recovery was compared for four different injection strategies: (1) surfactant followed by polymer, (2) surfactant followed by alkaline polymer, (3) alkaline surfactant followed by polymer, and (4) alkali, surfactant, and polymer mixed in a single formulation. The effect of alkaline preflush was also studied under two different conditions. All of the oil recovery experiments were conducted under optimal conditions with a viscous, non-acidic oil from Hepler (KS) oil field. The coreflood experiments were conducted with Berea sandstone cores since field core was not available in sufficient quantity for coreflood tests. The Tucker sand of Hepler field is a Class I fluvial dominated deltaic reservoir, as classified by the Department of Energy, which has been selected as the site of a DOE-sponsored field pilot test.

  13. Sodium Oxybate

    MedlinePlus

    ... if you use or have ever used street drugs, or if you have overused prescription medications. Sodium oxybate may be harmful when taken by people other than the person for whom it was prescribed. Do not sell or give your sodium oxybate to anyone else; selling or sharing it is against the law. Store ...

  14. Pore water chemistry of an alkaline rift valley lake: Lake Turkana, Kenya

    SciTech Connect

    Cerling, T.E.; Johnson, T.C.; Halfman, J.D.; Lister, G.

    1985-01-01

    Lake Turkana is the largest closed basin lake in the African rift system. It has evolved through the past 5000 years to become a moderately alkaline lake. Previous mass balance argument suggest that sulfate is removed from the lake by sulfate reduction in the sediments, and that the lake is accumulating in chloride, sodium, and alkalinity. Studies of pore water from 12 meter cores collected in November 1984 show that sulfate is reduced in the sediment column with a net production of alkalinity. Some sodium is lost from the lake and diffuses into the sediment to maintain charge balance. At several meters depth, organic matter is destroyed by methanogenic bacteria, as shown by the high delta /sup 13/C values for dissolved inorganic carbon. Magnesium and calcium molar ratios change with depth; chloride, sodium, and alkalinity also change with depth.

  15. Investigating mechanisms of alkalinization for reducing primary breast tumor invasion.

    PubMed

    Robey, Ian F; Nesbit, Lance A

    2013-01-01

    The extracellular pH (pHe) of many solid tumors is acidic as a result of glycolytic metabolism and poor perfusion. Acidity promotes invasion and enhances metastatic potential. Tumor acidity can be buffered by systemic administration of an alkaline agent such as sodium bicarbonate. Tumor-bearing mice maintained on sodium bicarbonate drinking water exhibit fewer metastases and survive longer than untreated controls. We predict this effect is due to inhibition of tumor invasion. Reducing tumor invasion should result in fewer circulating tumor cells (CTCs). We report that bicarbonate-treated MDA-MB-231 tumor-bearing mice exhibited significantly lower numbers of CTCs than untreated mice (P < 0.01). Tumor pHe buffering may reduce optimal conditions for enzymes involved in tumor invasion such as cathepsins and matrix metalloproteases (MMPs). To address this, we tested the effect of transient alkalinization on cathepsin and MMP activity using enzyme activatable fluorescence agents in mice bearing MDA-MB-231 mammary xenografts. Transient alkalinization significantly reduced the fluorescent signal of protease-specific activatable agents in vivo (P ≤ 0.003). Alkalinization, however, did not affect expression of carbonic anhydrase IX (CAIX). The findings suggest a possible mechanism in a live model system for breast cancer where systemic alkalinization slows the rate of invasion. PMID:23936808

  16. Alkaline quinone flow battery.

    PubMed

    Lin, Kaixiang; Chen, Qing; Gerhardt, Michael R; Tong, Liuchuan; Kim, Sang Bok; Eisenach, Louise; Valle, Alvaro W; Hardee, David; Gordon, Roy G; Aziz, Michael J; Marshak, Michael P

    2015-09-25

    Storage of photovoltaic and wind electricity in batteries could solve the mismatch problem between the intermittent supply of these renewable resources and variable demand. Flow batteries permit more economical long-duration discharge than solid-electrode batteries by using liquid electrolytes stored outside of the battery. We report an alkaline flow battery based on redox-active organic molecules that are composed entirely of Earth-abundant elements and are nontoxic, nonflammable, and safe for use in residential and commercial environments. The battery operates efficiently with high power density near room temperature. These results demonstrate the stability and performance of redox-active organic molecules in alkaline flow batteries, potentially enabling cost-effective stationary storage of renewable energy. PMID:26404834

  17. Stereochemistry of the epoxidation of internal perfluoroalkenes with sodium hypochlorite

    SciTech Connect

    Filyakova, T.I.; Peschanskii, N.V.; Kodess, M.I.; Zapevalov, A.Ya.; Kolenko, I.P.

    1988-07-20

    The authors studied the epoxidation of the mixture of cis and trans isomers of internal disubstituted perfluoroalkenes with sodium hypochlorite. Epoxidation was realized with an alkaline aqueous solution of sodium hypochlorite in the presence of acetonitrile. The epoxidation of the geometric isomers of internal disubstituted perfluoroalkenes by sodium hypochlorite is stereospecific. The /sup 19/F NMR spectra of the cis and trans isomers of internal perfluoroolefin oxides were obtained, and the relationships are discussed.

  18. 21 CFR 522.161 - Betamethasone acetate and betamethasone disodium phosphate aqueous suspension.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... milligrams of dibasic sodium phosphate, 5 milligrams of sodium chloride, 0.1 milligram of disodium EDTA, 0.5 milligram of polysorbate 80, 9 milligrams of benzyl alcohol, 5 milligrams of sodium carboxymethylcellulose, 1.8 milligrams of methylparaben, 0.2 milligram of propylparaben, hydrochloric acid and/or...

  19. 21 CFR 522.161 - Betamethasone acetate and betamethasone disodium phosphate aqueous suspension.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... milligrams of dibasic sodium phosphate, 5 milligrams of sodium chloride, 0.1 milligram of disodium EDTA, 0.5 milligram of polysorbate 80, 9 milligrams of benzyl alcohol, 5 milligrams of sodium carboxymethylcellulose, 1.8 milligrams of methylparaben, 0.2 milligram of propylparaben, hydrochloric acid and/or...

  20. 21 CFR 522.161 - Betamethasone acetate and betamethasone disodium phosphate aqueous suspension.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... milligrams of dibasic sodium phosphate, 5 milligrams of sodium chloride, 0.1 milligram of disodium EDTA, 0.5 milligram of polysorbate 80, 9 milligrams of benzyl alcohol, 5 milligrams of sodium carboxymethylcellulose, 1.8 milligrams of methylparaben, 0.2 milligram of propylparaben, hydrochloric acid and/or...

  1. Enrichment of thermosensitive chitosan hydrogels with glycerol and alkaline phosphatase for bone tissue engineering applications.

    PubMed

    Douglas, Timothy E L; Krok-Borkowicz, Małgorzata; Macuda, Aleksandra; Pietryga, Krzysztof; Pamuła, Elżbieta

    2016-01-01

    Thermosensitive injectable chitosan hydrogels can be formed by neutralization of acidic chitosan solutions with sodium betaglycerophosphate (Na-β-GP) coupled with increasing temperature to body temperature. Such hydrogels have been considered for applications in bone regeneration. In this study, chitosan hydrogels were enriched with glycerol and the enzyme alkaline phosphatase (ALP) with a view to improving their suitability as materials for bone tissue engineering. Mineral formation was confirmed by infrared spectroscopy (FTIR) and increases in the mass fraction of the hydrogel not consisting of water. Incorporation of ALP in hydrogels followed by incubation in a solution containing calcium ions and glycerophosphate, a substrate for ALP, led to formation of calcium phosphate within the hydrogel. MG-63 osteoblast-like cells were cultivated in eluates from hydrogels containing ALP and without ALP at different dilutions and directly on the hydrogel samples. Hydrogels containing ALP exhibited superior cytocompatibility to ALP-free hydrogels. These results pave the way for the use of glycerol- and ALP-enriched hydrogels in bone regeneration. PMID:27405261

  2. A substrate-induced conformation change in the reaction of alkaline phosphatase from Escherichia coli

    PubMed Central

    Halford, S. E.; Bennett, N. G.; Trentham, D. R.; Gutfreund, H.

    1969-01-01

    1. Benzyl phosphonates were prepared and their potentialities as chromophoric reagents for the exploration of the substrate-binding site of Escherichia coli alkaline phosphatase were investigated. 4-Nitrobenzylphosphonate is a competitive inhibitor of the enzyme. 2-Hydroxy-5-nitrobenzylphosphonate changes its spectrum on binding to the enzyme. This spectral change is reversed when the phosphonate is displaced from the enzyme by substrate. 2. The kinetics of the reaction of 2-hydroxy-5-nitrophenylphosphonate were studied by the stopped-flow and the temperature-jump techniques. It was found that the combination of the phosphonate with the enzyme occurred in two successive and reversible steps: enzyme–phosphonate complex-formation followed by rearrangement of the complex. The spectral change is associated with the rearrangement. At pH8 in 1m-sodium chloride at 22° the rate constant is 167sec.−1 for the rearrangement of the initially formed binary complex and is 18sec.−1 for the reverse process. 3. It has previously been proposed that the reactions of phosphatase with its substrates include a distinct step between enzyme–substrate combination and chemical catalysis. The rate constant involved could be predicted but not measured from experiments with substrates. The value for the rate constant measured from the rate of the enzyme–phosphonate rearrangement is in excellent agreement with the predicted value. A model for the reaction mechanism is proposed that includes a conformation change in response to phosphate ester binding before phosphate transfer from substrate to enzyme. ImagesFig. 5.Fig. 6. PMID:4897458

  3. Cellulose degradation in alkaline media upon acidic pretreatment and stabilisation.

    PubMed

    Testova, Lidia; Nieminen, Kaarlo; Penttilä, Paavo A; Serimaa, Ritva; Potthast, Antje; Sixta, Herbert

    2014-01-16

    The present study reports on a revised kinetic model for alkaline degradation of cellulose accounting for primary peeling/stopping reactions as well as for alkaline hydrolysis followed by secondary peeling. Oxalic acid pretreated cotton linters was utilised as the model substrate for the prehydrolysis-soda anthraquinone process. The main emphasis was investigating the effect of end-group stabilising additives such as sodium borohydride (BH), anthraquinone (AQ), and anthraquinone-2-sulphonic acid sodium salt (AQS) on the rates of the yield loss reactions. BH and AQS ensured a cellulose yield gain of 13% and 11%, respectively, compared to the reference. Both stabilisation agents decreased the content of the reducing end groups in the samples, while in the case of AQS stabilisation a 25% increase in carboxyl group content compared to the reference was also observed. As expected, the addition of end group stabilisers resulted in a significant decrease in the peeling-to-stopping rate constants ratio. PMID:24188853

  4. Alkaline Phosphatase in Stem Cells

    PubMed Central

    Štefková, Kateřina; Procházková, Jiřina; Pacherník, Jiří

    2015-01-01

    Alkaline phosphatase is an enzyme commonly expressed in almost all living organisms. In humans and other mammals, determinations of the expression and activity of alkaline phosphatase have frequently been used for cell determination in developmental studies and/or within clinical trials. Alkaline phosphatase also seems to be one of the key markers in the identification of pluripotent embryonic stem as well as related cells. However, alkaline phosphatases exist in some isoenzymes and isoforms, which have tissue specific expressions and functions. Here, the role of alkaline phosphatase as a stem cell marker is discussed in detail. First, we briefly summarize contemporary knowledge of mammalian alkaline phosphatases in general. Second, we focus on the known facts of its role in and potential significance for the identification of stem cells. PMID:25767512

  5. Alkaline fuel cells applications

    NASA Astrophysics Data System (ADS)

    Kordesch, Karl; Hacker, Viktor; Gsellmann, Josef; Cifrain, Martin; Faleschini, Gottfried; Enzinger, Peter; Fankhauser, Robert; Ortner, Markus; Muhr, Michael; Aronson, Robert R.

    On the world-wide automobile market technical developments are increasingly determined by the dramatic restriction on emissions as well as the regimentation of fuel consumption by legislation. Therefore there is an increasing chance of a completely new technology breakthrough if it offers new opportunities, meeting the requirements of resource preservation and emission restrictions. Fuel cell technology offers the possibility to excel in today's motive power techniques in terms of environmental compatibility, consumer's profit, costs of maintenance and efficiency. The key question is economy. This will be decided by the costs of fuel cell systems if they are to be used as power generators for future electric vehicles. The alkaline hydrogen-air fuel cell system with circulating KOH electrolyte and low-cost catalysed carbon electrodes could be a promising alternative. Based on the experiences of Kordesch [K. Kordesch, Brennstoffbatterien, Springer, Wien, 1984, ISBN 3-387-81819-7; K. Kordesch, City car with H 2-air fuel cell and lead-battery, SAE Paper No. 719015, 6th IECEC, 1971], who operated a city car hybrid vehicle on public roads for 3 years in the early 1970s, improved air electrodes plus new variations of the bipolar stack assembly developed in Graz are investigated. Primary fuel choice will be a major issue until such time as cost-effective, on-board hydrogen storage is developed. Ammonia is an interesting option. The whole system, ammonia dissociator plus alkaline fuel cell (AFC), is characterised by a simple design and high efficiency.

  6. Availability of phosphorus from selected inorganic phosphate to juvenile abalone, Haliotis discus hannai ino.

    NASA Astrophysics Data System (ADS)

    Tan, Bei-Ping; Mai, Kang-Sen; Xu, Wei

    2002-06-01

    The availability of phosphorus to juvenile abalone, Haliotis discus hannai from primary, secondary and tertiary calcium phosphate, primary sodium or potassium phosphate separately or in combination was determined in a 120-day feeding trial. Seven semi-purified diets were formulated to contain relatively constant dietary phosphorus, ranging from 0.78% 0.82%. The concentrations of dietary phosphorus were presumed to be slightly below the requirement for abalone. A brown alga, Laminaria japonica, was used as a control diet. Abalone juveniles of silimar size (average weight 1.18 g; average shell length 18.74 mm) were distributed in a single-pass, flow-through system using a completely randomized design with eight treatments and three replicates each treatment. The survival ranged from 71.1% to 81.1%, and was not significantly (P>0.05) related to dietary treatment. However, the weight gain rate (41.72% 65.02%), daily increment in shell length (36.87 55.07 μm) and muscle RNA-DNA ratio (3.44 4.69) were significantly (P<0.05) affected by dietary treatment. Soft body alkaline phosphatase activity (10.9 19.8 U/g wet tissue) and carcass levels of lipid (7.71% 9.33%) and protein (46.68% 49.35%) were significantly (P<0.05) responsive to available phosphorus of the diets. Dietary treatment had significant effect (P<0.05) on concentrations of phosphorus in the whole body (WB) and soft body (SB). Apparent digestibility coefficients (45% 97%) of phosphorus were also significantly (P<0.05) different between dietary treatments. The results indicated that among these inorganic compounds, primary calcium, potassium and sodium phosphates separately or in combination could be utilized effectively by juvenile abalone as dietary phosphorus sources (availability ranging from 87% 97%). However, secondary and tertiary calcium phosphates were found to be low in availability, the values being 45% and 77%, repectively.

  7. Molecular modeling of human alkaline sphingomyelinase.

    PubMed

    Suresh, Panneer Selvam; Olubiyi, Olujide; Thirunavukkarasu, Chinnasamy; Strodel, Birgit; Kumar, Muthuvel Suresh

    2011-01-01

    Alkaline sphingomyelinase, which is expressed in the human intestine and hydrolyses sphingomyelin, is a component of the plasma and the lysosomal membranes. Hydrolase of sphingomyelin generates ceramide, sphingosine, and sphingosine 1-phosphate that have regulatory effects on vital cellular functions such as proliferation, differentiation, and apoptosis. The enzyme belongs to the Nucleotide Pyrophosphatase/Phosphodiesterase family and it differs in structural similarity with acidic and neutral sphingomyelinase. In the present study we modeled alkaline sphingomyelinase using homology modeling based on the structure of Nucleotide Pyrophosphatase/Phosphodiesterase from Xanthomonas axonopodis with which it shares 34% identity. Homology modeling was performed using Modeller9v7. We found that Cys78 and Cys394 form a disulphide bond. Further analysis shows that Ser76 may be important for the function of this enzyme, which is supported by the findings of Wu et al. (2005), that S76F abolishes the activity completely. We found that the residues bound to Zn(2+) are conserved and geometrically similar with the template. Molecular Dynamics simulations were carried out for the modeled protein to observe the effect of Zinc metal ions. It was observed that the metal ion has little effect with regard to the stability but induces increased fluctuations in the protein. These analyses showed that Zinc ions play an important role in stabilizing the secondary structure and in maintaining the compactness of the active site. PMID:21544170

  8. Microbial solubilization of phosphate

    DOEpatents

    Rogers, R.D.; Wolfram, J.H.

    1993-10-26

    A process is provided for solubilizing phosphate from phosphate containing ore by treatment with microorganisms which comprises forming an aqueous mixture of phosphate ore, microorganisms operable for solubilizing phosphate from the phosphate ore and maintaining the aqueous mixture for a period of time and under conditions operable to effect the microbial solubilization process. An aqueous solution containing soluble phosphorus can be separated from the reacted mixture by precipitation, solvent extraction, selective membrane, exchange resin or gravity methods to recover phosphate from the aqueous solution. 6 figures.

  9. Microbial solubilization of phosphate

    DOEpatents

    Rogers, Robert D.; Wolfram, James H.

    1993-01-01

    A process is provided for solubilizing phosphate from phosphate containing ore by treatment with microorganisms which comprises forming an aqueous mixture of phosphate ore, microorganisms operable for solubilizing phosphate from the phosphate ore and maintaining the aqueous mixture for a period of time and under conditions operable to effect the microbial solubilization process. An aqueous solution containing soluble phosphorous can be separated from the reacted mixture by precipitation, solvent extraction, selective membrane, exchange resin or gravity methods to recover phosphate from the aqueous solution.

  10. The precipitation of magnesium potassium phosphate hexahydrate for P and K recovery from synthetic urine.

    PubMed

    Xu, Kangning; Li, Jiyun; Zheng, Min; Zhang, Chi; Xie, Tao; Wang, Chengwen

    2015-09-01

    Nutrients recovery from urine to close the nutrient loop is one of the most attractive benefits of source separation in wastewater management. The current study presents an investigation of the thermodynamic modeling of the recovery of P and K from synthetic urine via the precipitation of magnesium potassium phosphate hexahydrate (MPP). Experimental results show that maximum recovery efficiencies of P and K reached 99% and 33%, respectively, when the precipitation process was initiated only through adding dissolvable Mg compound source. pH level and molar ratio of Mg:P were key factors determining the nutrient recovery efficiencies. Precipitation equilibrium of MPP and magnesium sodium phosphate heptahydrate (MSP) was confirmed via precipitates analysis using a Scanning Electron Microscope/Energy Dispersive Spectrometer and an X-ray Diffractometer. Then, the standard solubility products of MPP and MSP in the synthetic urine were estimated to be 10(-12.2 ± 0.0.253) and 10(-11.6 ± 0.253), respectively. The thermodynamic model formulated on chemical software PHREEQC could well fit the experimental results via comparing the simulated and measured concentrations of K and P in equilibrium. Precipitation potentials of three struvite-type compounds were calculated through thermodynamic modeling. Magnesium ammonium phosphate hexahydrate (MAP) has a much higher tendency to precipitate than MPP and MSP in normal urine while MSP was the main inhibitor of MPP in ammonium-removed urine. To optimize the K recovery, ammonium should be removed prior as much as possible and an alternative alkaline compound should be explored for pH adjustment rather than NaOH. PMID:25996754

  11. Acifluorfen, sodium

    Integrated Risk Information System (IRIS)

    Acifluorfen , sodium ; CASRN 62476 - 59 - 9 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcino

  12. Sodium diethyldithiocarbamate

    Integrated Risk Information System (IRIS)

    Sodium diethyldithiocarbamate ; CASRN 148 - 18 - 5 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Non

  13. Sodium fluoroacetate

    Integrated Risk Information System (IRIS)

    Sodium fluoroacetate ; CASRN 62 - 74 - 8 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogen

  14. Sodium azide

    Integrated Risk Information System (IRIS)

    Sodium azide ; CASRN 26628 - 22 - 8 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Ef

  15. Sodium cyanide

    Integrated Risk Information System (IRIS)

    Jump to main content . Integrated Risk Information System Recent Additions | Contact Us Search : All EPA IRIS • You are here : EPA Home • Research • Environmental Assessment • IRIS • IRIS Summaries Redirect Page As of September 28 , 2010 , the assessment summary for sodium cyanide is included in the

  16. Additive concentration effects on dicalcium phosphate dihydrate cements prepared using monocalcium phosphate monohydrate and hydroxyapatite.

    PubMed

    Santa Cruz Chavez, Grace; Alge, Daniel L; Chu, Tien-Min Gabriel

    2011-11-21

    In our previous study, we investigated the setting time, mechanical properties and microstructure of dicalcium phosphate dihydrate cements prepared using monocalcium phosphate monohydrate (MCPM) and hydroxyapatite (HA). Despite the use of sodium citrate as a setting regulator, setting occurs rapidly in the MCPM/HA system and further studies on other retardants are needed. In the present study, sodium pyrophosphate and sulfuric acid were tested to evaluate their effectiveness in maintaining workability of the cement paste. MCPM/HA cements at a powder to liquid ratio of 1.0 with sodium pyrophosphate and sulfuric acid at 10, 25, 50, 75 and 100 mM were manufactured and studied based on their setting time, mechanical and porosity properties, phase composition, and microstructure. These measurements were compared to our previous data using sodium citrate. The results showed that the additives have a dose-dependent effect on the setting time. Their order of efficiency is sodium pyrophosphate > sodium citrate > sulfuric acid. However, the sulfuric acid group exhibited the highest compressive strength (CS) compared to the other groups. A lack of correlation between the CS and the porosity of the cements suggested that a mechanism other than porosity reduction was responsible for the CS increase. Since x-ray diffraction analysis did not indicate an effect on composition, explanations based on calcium sulfate dihydrate formation and changes in microstructure were proposed based on scanning electron micrograph observations. PMID:22101069

  17. Alkaline dechlorination of chlorinated volatile organic compounds

    SciTech Connect

    Gu, B.; Siegrist, R.L.

    1996-06-01

    The vast majority of contaminated sites in the United States and abroad are contaminated with chlorinated volatile organic compounds (VOCs) such as trichloroethylene (TCE), trichloroethane (TCA), and chloroform. These VOCs are mobile and persistent in the subsurface and present serious health risks at trace concentrations. The goal of this project was to develop a new chemical treatment system that can rapidly and effectively degrade chlorinated VOCs. The system is based on our preliminary findings that strong alkalis such as sodium hydroxide (NaOH) can absorb and degrade TCE. The main objectives of this study were to determine the reaction rates between chlorinated VOCs, particularly TCE, and strong alkalis, to elucidate the reaction mechanisms and by-products, to optimize the chemical reactions under various experimental conditions, and to develop a laboratory bench- scale alkaline destruction column that can be used to destroy vapor- phase TCE.

  18. Bifunctional alkaline oxygen electrodes

    NASA Technical Reports Server (NTRS)

    Swette, L.; Kackley, N.; Mccatty, S. A.

    1991-01-01

    The authors describe the identification and testing of electrocatalysts and supports for the positive electrode of moderate-temperature, single-unit, rechargeable alkaline fuel cells. Recent work on Na(x)Pt3O4, a potential bifunctional catalyst, is described, as well as the application of novel approaches to the development of more efficient bifunctional electrode structures. The three dual-character electrodes considered here showed similar superior performance; the Pt/RhO2 and Rh/RhO2 electrodes showed slightly better performance than the Pt/IrO2 electrode. It is concluded that Na(x)Pt3O4 continues to be a promising bifunctional oxygen electrode catalyst but requires further investigation and development.

  19. Glucose-6-phosphate dehydrogenase

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003671.htm Glucose-6-phosphate dehydrogenase test To use the sharing features on this page, please enable JavaScript. Glucose-6-phosphate dehydrogenase (G6PD) is a type of ...

  20. Chloroquine Phosphate Oral

    MedlinePlus

    ... allergic to chloroquine phosphate, chloroquine hydrochloride (Aralen HCl), hydroxychloroquine (Plaquenil), or any other drugs.tell your doctor ... taking chloroquine phosphate, chloroquine hydrochloride (Aralen HCl), or hydroxychloroquine (Plaquenil).tell your doctor if you are pregnant ...

  1. Chloroquine Phosphate Oral

    MedlinePlus

    ... allergic to chloroquine phosphate, chloroquine hydrochloride (Aralen HCl), hydroxychloroquine (Plaquenil), or any other drugs.tell your doctor and ... taking chloroquine phosphate, chloroquine hydrochloride (Aralen HCl), or hydroxychloroquine (Plaquenil).tell your doctor if you are pregnant ...

  2. Uranium from phosphate ores

    SciTech Connect

    Hurst, F.J.

    1983-01-01

    The following topics are described briefly: the way phosphate fertilizers are made; how uranium is recovered in the phosphate industry; and how to detect covert uranium recovery operations in a phsophate plant.

  3. Final report on the safety assessment of octoxynol-1, octoxynol-3, octoxynol-5, octoxynol-6, octoxynol-7, octoxynol-8, octoxynol-9, octoxynol-10, octoxynol-11, octoxynol-12, octoxynol-13, octoxynol-16, octoxynol-20, octoxynol-25, octoxynol-30, octoxynol-33, octoxynol-40, octoxynol-70, octoxynol-9 carboxylic acid, octoxynol-20 carboxylic acid, potassium octoxynol-12 phosphate, sodium octoxynol-2 ethane sulfonate, sodium octoxynol-2 sulfate, sodium octoxynol-6 sulfate, and sodium octoxynol-9 sulfate.

    PubMed

    Johnson, Wilbur

    2004-01-01

    autoimmune response in mice. In the Ames test, Octoxynol-1 was not mutagenic with and without metabolic activation nor was Octoxynol-9 clastogenic. Results for Octoxynol-9 were negative in the following assays: unscheduled DNA synthesis, hypoxanthine guanine phosphoribosyl transferase mutation assay, malignant transformation assay, DNA alkaline unwinding test, and mouse lymphoma thymidine kinase locus forward mutation assay. Ethoxylated alkylphenols are generally considered to be estrogenic in that they mimic the effects of estradiol. Dermal exposure at three dose levels of rats to Octoxynol-9 failed to induce any malformations by category (external, visceral, or skeletal) or by individual anatomical location that were different from controls at statistically significant level. An increased incidence of a vestigial thoracic rib was observed in all dose groups. Octoxynol-9 also did not induce developmental toxicity (number of viable litters, liveborn per litter, percentage survival, birth weight per pup, and weight gain per pup) in female specific pathogen-free CD-1 mice dosed daily by gavage on gestation days 6 through 13. No reproductive toxicity was seen in male albino rats which received 5% Octoxynol-40 in the diet daily for 3 months; however, in an in vitro test, Octoxynol-9 (0.24 mg/ml) totally immobilized all human spermatozoa within 20 s. Women who used Nonoxynol-9 or Octoxynol-9 as spermicides, but who did become pregnant, did not have an increase in the overall risk of fetal malformations. In a human skin irritation study, formulations containing 2.0% Octoxynol-9 were classified as moderately irritating and minimally irritating, respectively, in a 24-h single-insult, occlusive patch test. Octoxynol-9 (1.0%) was classified as a nonirritant in a clinical study of nine subjects patch tested for 4 consecutive days. The skin sensitization potential of Octoxynols-1, -3, -5, -9, and -13 was evaluated using 50 subjects. Octoxynol-1 induced sensitization in two subjects; all

  4. Solubility of uranium in alkaline salt solutions

    SciTech Connect

    Hobbs, D.T.; Edwards, T.B.

    1994-03-29

    The solubility of uranium in alkaline salt solutions was investigated to screen for significant factors and interactions among the major salt components and temperature. The components included in the study were the sodium salts of hydroxide, nitrate, nitrite, aluminate, sulfate, and carbonate. General findings from the study included: (1) uranium solubilities are very low (1-20 mg/L) for all solution compositions at hydroxide concentrations from 0.1 to 17 molar (2) carbonate, sulfate, and aluminate are not effective complexants for uranium at high hydroxide concentration, (3) uranium solubility decreases with increasing temperature for most alkaline salt solutions, and (4) uranium solubility increases with changes in solution chemistry that reflect aging of high level waste (increase in nitrite and carbonate concentrations, decrease in nitrate and hydroxide concentrations). A predictive model for the concentration of uranium as a function of component concentrations and temperature was fitted to the data. All of the solution components and temperature were found to be significant. There is a significant lack of fit for the model, which suggests that the dependence on the uranium solubility over the wide range of solution compositions is non-linear and/or that there are other uncontrolled parameters which are important to the uranium solubility.

  5. FTIR and {sup 31}P-NMR spectroscopic analyses of surface species in phosphate-catalyzed lactic acid conversion

    SciTech Connect

    Gunter, G.C.; Tam, M.S.; Miller, D.J.

    1996-11-01

    The surface species present on silica/alumina-supported sodium phosphates, active catalysts for the conversion of lactic acid to acrylic acid and 2,3-pentanedione, are examined by pre- and postreaction MAS {sup 31}P-NMR and FTIR spectroscopies. Species present following lactic acid conversion are identified by transmission FTIR of phosphates supported on silicon disks (as a model catalyst system) and verified by {sup 31}P-NMR and diffuse reflectance IR spectroscopy of actual catalysts used in reaction. Monosodium phosphate (NaH{sub 2}PO{sub 4}) condenses to a mixture of sodium polyphosphate (NaPO{sub 3}){sub n} and sodium trimetaphosphate (Na{sub 3}P{sub 3}O{sub 9}), which exhibit little catalytic activity for converting lactic acid to desired products. Disodium phosphate (Na{sub 2}HPO{sub 4}) condenses to tetrasodium pyrophosphate (Na{sub 4}P{sub 2}O{sub 7}), and proton transfer from lactic acid to pyrophosphate results in the formation of sodium lactate. Trisodium phosphate (Na{sub 3}PO{sub 4}) accepts a proton from lactic acid to form sodium lactate and disodium phosphate, which condenses to pyrophosphate. The presence of pyrophosphate and sodium lactate on supported disodium and trisodium phosphates explains their similar catalytic properties; the larger quantity of sodium lactate present on trisodium phosphate leads to higher conversions at lower temperatures. 40 refs., 14 figs., 2 tabs.

  6. Test Your Sodium Smarts

    MedlinePlus

    ... You may be surprised to learn how much sodium is in many foods. Sodium, including sodium chloride ... foods with little or no salt. Test your sodium smarts by answering these 10 questions about which ...

  7. Low sodium level

    MedlinePlus

    Low sodium level is a condition in which the amount of sodium (salt) in the blood is lower ... and this causes many of the symptoms of low sodium. With low sodium level (hyponatremia), the imbalance of ...

  8. Alkalinity Enrichment Enhances Net Calcification of a Coral Reef Flat

    NASA Astrophysics Data System (ADS)

    Albright, R.; Caldeira, K.

    2015-12-01

    Ocean acidification is projected to shift reefs from a state of net accretion to one of net dissolution sometime this century. While retrospective studies show large-scale changes in coral calcification over the last several decades, it is not possible to unequivocally link these results to ocean acidification due to confounding factors of temperature and other environmental parameters. Here, we quantified the calcification response of a coral reef flat to alkalinity enrichment to test whether reef calcification increases when ocean chemistry is restored to near pre-industrial conditions. We used sodium hydroxide (NaOH) to increase the total alkalinity of seawater flowing over a reef flat, with the aim of increasing carbonate ion concentrations [CO32-] and the aragonite saturation state (Ωarag) to values that would have been attained under pre-industrial atmospheric pCO2 levels. We developed a dual tracer regression method to estimate alkalinity uptake (i.e., calcification) in response to alkalinity enrichment. This approach uses the change in ratios between a non-conservative tracer (alkalinity) and a conservative tracer (a non-reactive dye, Rhodamine WT) to assess the fraction of added alkalinity that is taken up by the reef as a result of an induced increase in calcification rate. Using this method, we estimate that an average of 17.3% ± 2.3% of the added alkalinity was taken up by the reef community. In providing results from the first seawater chemistry manipulation experiment performed on a natural coral reef community (without artificial confinement), we demonstrate that, upon increase of [CO32-] and Ωarag to near pre-industrial values, reef calcification increases. Thus, we conclude that, the impacts of ocean acidification are already being felt by coral reefs. This work is the culmination of years of work in the Caldeira lab at the Carnegie Institution for Science, involving many people including Jack Silverman, Kenny Schneider, and Jana Maclaren.

  9. Effects of vascular infusion with a solution of saccharides; sodium chloride; phosphates; and vitamins C, E, or both on carcass traits, Warner-Bratzler shear force, and palatability traits of steaks and ground beef.

    PubMed

    Yancey, E J; Dikeman, M E; Addist, P B; Katsanidis, E; Pullen, M

    2002-07-01

    Three groups of 12 high percentage Charolais steers were slaughtered on three dates. Steers (n = 27) were infused immediately after exsanguination at 10% of BW with a solution containing saccharides, NaCl, and phosphates (MPSC solution; MPSC, Inc., St. Paul, MN) plus either 500 ppm vitamin C (MPSC+C), 500 ppm vitamin E (MPSC+E), or 500 ppm vitamin C plus 500 ppm vitamin E (MPSC+C+E). Noninfused controls (CON) were 9 steers. The longissimus thoracis (LT), semitendinosus (ST), and quadriceps femoris muscles were removed at 48-h postmortem, vacuum-packaged, and aged until 14-d postmortem. Steaks 2.54-cm thick were cut from the LT and ST. The quadriceps was utilized for ground-beef production. Infused steers had higher dressing percentages and heavier heart and liver weights (P < 0.05) than CON. Vascular infusion with vitamins C, E, or C plus E had no effect (P > 0.05) on USDA yield and quality-grade traits, LT and ST Warner-Bratzler shear force, descriptive-attribute traits, and freshly cooked steak flavor-profile traits. Vascular infusion had little effect on the flavor-profile traits of warmed-over steaks. Therefore, the results of our study indicate that vascular infusion with vitamins C, E, or C plus E can increase dressing percentage and organ weights, but have minimal effects on descriptive-attribute and flavor-profile sensory panel ratings. PMID:12162658

  10. The Potential of Soft Soil Improvement Through a Coupled Technique Between Electro Kinetic and Alkaline Activation of Soft Soil

    NASA Astrophysics Data System (ADS)

    Ahmed, G. E.; Ismail, H. B.; Huat, B. K.; Afshin, A.; Azhar, A. T. S.

    2016-07-01

    Soil stabilization techniques have been in development for decades with different rates of success. Alkaline activation of soft soil is one of those techniques that has proved to deliver some of the best shear strength values with minor drawbacks in comparison with conventional soil stabilization methods. However, environmental considerations have not been taken into account, as major mineral glassy phase activators are poisoning alkaline solutions, such as sodium-, potassium-hydroxide, and sodium-, potassium-silicate, which poses serious hazards to man and environment. This paper addresses the ways of discarding the involvement of the aforementioned alkaline solutions in soft soil stabilization by investigating the potential of a coupled electro kinetic alkaline activation technique for soft soil strengthening, through which the provision of alkaline pH is governed by electro kinetic potential. Uncertainties in regard to the dissolution of aluminosilicate as well as the dominance of acidic front are challenges that need to be overcome.

  11. Effect of cobalt on synthesis and activation of Bacillus licheniformis alkaline phosphatase.

    PubMed Central

    Spencer, D B; Chen, C P; Hulett, F M

    1981-01-01

    The effect of CO2+ on the synthesis and activation of Bacillus licheniformis MC14 alkaline phosphatase has been shown by the development of a defined minimal salts medium in which this organism produces 35 times more (assayable) alkaline phosphatase than when grown in a low-phosphate complex medium or in the defined medium without cobalt. Stimulation of enzyme activity with cobalt is dependent on a low phosphate concentration in the medium (below 0.075 mM) and continued protein synthesis. Cobalt stimulation resulted in alkaline phosphate production being a major portion of total protein synthesized during late-logarithmic and early-stationary-phase culture growth. Cells cultured in the defined medium minus cobalt, or purified enzyme partially inactivated with a chelating agent, showed a 2.5-fold increase in activity when assayed in the presence of cobalt. Atomic spectral analysis indicated the presence of 3.65 +/- 0.45 g-atoms of cobalt associated with each mole of purified active alkaline phosphatase. A biochemical localization as a function of culture age in this medium showed that alkaline phosphatase was associated with the cytoplasmic membrane and was also found as a soluble enzyme in the periplasmic region and secreted into the growth medium. PMID:7462163

  12. Effect of cobalt on synthesis and activation of Bacillus licheniformis alkaline phosphatase.

    PubMed

    Spencer, D B; Chen, C P; Hulett, F M

    1981-02-01

    The effect of CO2+ on the synthesis and activation of Bacillus licheniformis MC14 alkaline phosphatase has been shown by the development of a defined minimal salts medium in which this organism produces 35 times more (assayable) alkaline phosphatase than when grown in a low-phosphate complex medium or in the defined medium without cobalt. Stimulation of enzyme activity with cobalt is dependent on a low phosphate concentration in the medium (below 0.075 mM) and continued protein synthesis. Cobalt stimulation resulted in alkaline phosphate production being a major portion of total protein synthesized during late-logarithmic and early-stationary-phase culture growth. Cells cultured in the defined medium minus cobalt, or purified enzyme partially inactivated with a chelating agent, showed a 2.5-fold increase in activity when assayed in the presence of cobalt. Atomic spectral analysis indicated the presence of 3.65 +/- 0.45 g-atoms of cobalt associated with each mole of purified active alkaline phosphatase. A biochemical localization as a function of culture age in this medium showed that alkaline phosphatase was associated with the cytoplasmic membrane and was also found as a soluble enzyme in the periplasmic region and secreted into the growth medium. PMID:7462163

  13. [Inhibition of alkaline phosphatase I of Pichia guilliermondii yeast in vitro and in vivo].

    PubMed

    Sibirnyi, A A; Shavlovskii, G M

    1978-01-01

    The rate of p-nitrophenyl phosphate and flavin mononucleotide (FMN) hydrolysis by the partially purified preparation of alkaline phosphatase I of Pichia guilliermondii flavinogenic yeast was studied as affected by different substrates and inorganic ions. Their Km was established to be 2.0 X 10(-4) m and 2.5 X 10(-4) M, respectively. Dephosphorylation of p-nitrophenylphosphate and FMN was inhibited competitively by beta-glycerophosphate (Ki = 3.1 X 10(-3) M, respectively). The presence of inorganic phosphate ions in the reaction mixture decreases or removes inhibition of these compounds hydrolysis by other substrates of alkaline phosphatase I. The activity of alkaline phosphatase I increases in the presence of Mg2+ and was strongly inhibited in the presence of Be2+, Cu2+, Zn2+, Cd2+ and inorganic phosphate, the mixture of Be2+ and F- being the most effective. This mixture inhibited the phosphatase activity of the partially purified preparation of alkaline phosphatase I of the cell-free extract as well as of intact cells in both the alkaline and acid zones of pH (8.6 and 5.5, respectively). Incubation of the washed iron-deficient P. guilliermondii cells in the presence of Be2+ and F- did not result in accumulation of FMN in the yeast culture. A possible role of nonspecific phosphomonoesterases in hydrolysis of FMN in vivo is discussed. PMID:208203

  14. Low sodium diet (image)

    MedlinePlus

    ... for you. Look for these words on labels: low-sodium, sodium-free, no salt added, sodium-reduced, or ... for you. Look for these words on labels: low-sodium, sodium-free, no salt added, sodium-reduced, or ...

  15. Biochemical localization of the alkaline phosphatase of Bacillus licheniformis as a function of culture age.

    PubMed Central

    Glynn, J A; Schaffel, S D; McNicholas, J M; Hulett, F M

    1977-01-01

    Biochemical localization of the enzyme as a function of age of cell culture showed the alkaline phosphatase (orthophosphoric monoester phosphohydrolase, EC 3.1.3.1) activity of Bacillus licheniformis MC14 predominantly in the particulate cell fraction in early- and mid-log cells. However, in late-log and stationary cells, increasing amounts of activity were found in the soluble fraction of lysed cells. Upon protoplast formation of these cells, the activity was released into the soluble fraction. No alkaline phosphatase activity was found in either the cytoplasmic fraction or in the cell medium during any phase of cell growth. The soluble fraction released on protoplast formation that contained alkaline phosphatase activity showed immunological cross-reactivity with antibody to the purified heat--salt-solubilized membrane alkaline phosphatase (F. M. Hulett-Cowling and L. L. Campbell, 1971). Theparticulate membrane fraction containing a firmly associated alkaline phosphatase also showed similar cross-reactivity. Further, the effectiveness of nonionic detergents, ionic detergents, bile salts, and various concentrations of magnesium and sodium as solubilizing agents for this membrane-bound alkaline phosphatase was investigated. Hexadecyl pyridinium chloride (0.03 M) and magnesium and sodium salts (above 0.2 M) were effective solubilizing agents. The substrate specificities of the various fractions were determined and compared to the substrate specificities of the purified membrane alkaline phosphatase. Images PMID:838674

  16. Biochemical localization of the alkaline phosphatase of Bacillus licheniformis as a function of culture age.

    PubMed

    Glynn, J A; Schaffel, S D; McNicholas, J M; Hulett, F M

    1977-02-01

    Biochemical localization of the enzyme as a function of age of cell culture showed the alkaline phosphatase (orthophosphoric monoester phosphohydrolase, EC 3.1.3.1) activity of Bacillus licheniformis MC14 predominantly in the particulate cell fraction in early- and mid-log cells. However, in late-log and stationary cells, increasing amounts of activity were found in the soluble fraction of lysed cells. Upon protoplast formation of these cells, the activity was released into the soluble fraction. No alkaline phosphatase activity was found in either the cytoplasmic fraction or in the cell medium during any phase of cell growth. The soluble fraction released on protoplast formation that contained alkaline phosphatase activity showed immunological cross-reactivity with antibody to the purified heat--salt-solubilized membrane alkaline phosphatase (F. M. Hulett-Cowling and L. L. Campbell, 1971). Theparticulate membrane fraction containing a firmly associated alkaline phosphatase also showed similar cross-reactivity. Further, the effectiveness of nonionic detergents, ionic detergents, bile salts, and various concentrations of magnesium and sodium as solubilizing agents for this membrane-bound alkaline phosphatase was investigated. Hexadecyl pyridinium chloride (0.03 M) and magnesium and sodium salts (above 0.2 M) were effective solubilizing agents. The substrate specificities of the various fractions were determined and compared to the substrate specificities of the purified membrane alkaline phosphatase. PMID:838674

  17. Modulators of intestinal alkaline phosphatase.

    PubMed

    Bobkova, Ekaterina V; Kiffer-Moreira, Tina; Sergienko, Eduard A

    2013-01-01

    Small molecule modulators of phosphatases can lead to clinically useful drugs and serve as invaluable tools to study functional roles of various phosphatases in vivo. Here, we describe lead discovery strategies for identification of inhibitors and activators of intestinal alkaline phosphatases. To identify isozyme-selective inhibitors and activators of the human and mouse intestinal alkaline phosphatases, ultrahigh throughput chemiluminescent assays, utilizing CDP-Star as a substrate, were developed for murine intestinal alkaline phosphatase (mIAP), human intestinal alkaline phosphatase (hIAP), human placental alkaline phosphatase (PLAP), and human tissue-nonspecific alkaline phosphatase (TNAP) isozymes. Using these 1,536-well assays, concurrent HTS screens of the MLSMR library of 323,000 compounds were conducted for human and mouse IAP isozymes monitoring both inhibition and activation. This parallel screening approach led to identification of a novel inhibitory scaffold selective for murine intestinal alkaline phosphatase. SAR efforts based on parallel testing of analogs against different AP isozymes generated a potent inhibitor of the murine IAP with IC50 of 540 nM, at least 65-fold selectivity against human TNAP, and >185 selectivity against human PLAP. PMID:23860652

  18. Alkaline battery, separator therefore

    NASA Technical Reports Server (NTRS)

    Schmidt, George F. (Inventor)

    1980-01-01

    An improved battery separator for alkaline battery cells has low resistance to electrolyte ion transfer and high resistance to electrode ion transfer. The separator is formed by applying an improved coating to an electrolyte absorber. The absorber, preferably, is a flexible, fibrous, and porous substrate that is resistant to strong alkali and oxidation. The coating composition includes an admixture of a polymeric binder, a hydrolyzable polymeric ester and inert fillers. The coating composition is substantially free of reactive fillers and plasticizers commonly employed as porosity promoting agents in separator coatings. When the separator is immersed in electrolyte, the polymeric ester of the film coating reacts with the electrolyte forming a salt and an alcohol. The alcohol goes into solution with the electrolyte while the salt imbibes electrolyte into the coating composition. When the salt is formed, it expands the polymeric chains of the binder to provide a film coating substantially permeable to electrolyte ion transfer but relatively impermeable to electrode ion transfer during use.

  19. Evaluation of Alkaline Cleaner Materials

    NASA Technical Reports Server (NTRS)

    Partz, Earl

    1998-01-01

    Alkaline cleaners used to process aluminum substrates have contained chromium as the corrosion inhibitor. Chromium is a hazardous substance whose use and control are described by environmental laws. Replacement materials that have the characteristics of chromated alkaline cleaners need to be found that address both the cleaning requirements and environmental impacts. This report will review environmentally friendly candidates evaluated as non-chromium alkaline cleaner replacements and methods used to compare those candidates one versus another. The report will also list characteristics used to select candidates based on their declared contents. It will also describe and evaluate methods used to discriminate among the large number of prospective candidates.

  20. Chemical nature of alkaline polyphosphate boundary film at heated rubbing surfaces

    PubMed Central

    Wan, Shanhong; Tieu, A. Kiet; Zhu, Qiang; Zhu, Hongtao; Cui, Shaogang; Mitchell, David R. G.; Kong, Charlie; Cowie, Bruce; Denman, John A.; Liu, Rong

    2016-01-01

    Alkaline polyphosphate has been demonstrated to be able to reduce significant wear and friction of sliding interfaces under heavy loads (>1 GPa) and elevated temperature (800 °C and above) conditions, e.g. hot metal manufacturing. The chemical composition and fine structure of polyphosphate lubricating film is not well understood as well as the role of alkaline elements within the reaction film at hot rubbing surface. This work makes use of the coupling surface analytical techniques on the alkaline polyphosphate tribofilm, XANES, TOF-SIMS and FIB/TEM. The data show the composition in gradient distribution and trilaminar structure of tribofilm: a shorter chain phosphate overlying a long chain polyphosphate that adheres onto oxide steel base through a short chain phosphate. The chemical hardness model well explains the anti-abrasive mechanism of alkaline polyphosphate at elevated temperatures and also predicts a depolymerisation and simultaneous cross-linking of the polyphosphate glass. The role of alkaline elements in the lubrication mechanism is especially explained. This work firstly serves as a basis for a detailed study of alkaline polyphosphate tribofilm at temperature over 600 °C. PMID:27180956

  1. Chemical nature of alkaline polyphosphate boundary film at heated rubbing surfaces

    NASA Astrophysics Data System (ADS)

    Wan, Shanhong; Tieu, A. Kiet; Zhu, Qiang; Zhu, Hongtao; Cui, Shaogang; Mitchell, David R. G.; Kong, Charlie; Cowie, Bruce; Denman, John A.; Liu, Rong

    2016-05-01

    Alkaline polyphosphate has been demonstrated to be able to reduce significant wear and friction of sliding interfaces under heavy loads (>1 GPa) and elevated temperature (800 °C and above) conditions, e.g. hot metal manufacturing. The chemical composition and fine structure of polyphosphate lubricating film is not well understood as well as the role of alkaline elements within the reaction film at hot rubbing surface. This work makes use of the coupling surface analytical techniques on the alkaline polyphosphate tribofilm, XANES, TOF-SIMS and FIB/TEM. The data show the composition in gradient distribution and trilaminar structure of tribofilm: a shorter chain phosphate overlying a long chain polyphosphate that adheres onto oxide steel base through a short chain phosphate. The chemical hardness model well explains the anti-abrasive mechanism of alkaline polyphosphate at elevated temperatures and also predicts a depolymerisation and simultaneous cross-linking of the polyphosphate glass. The role of alkaline elements in the lubrication mechanism is especially explained. This work firstly serves as a basis for a detailed study of alkaline polyphosphate tribofilm at temperature over 600 °C.

  2. Chemical nature of alkaline polyphosphate boundary film at heated rubbing surfaces.

    PubMed

    Wan, Shanhong; Tieu, A Kiet; Zhu, Qiang; Zhu, Hongtao; Cui, Shaogang; Mitchell, David R G; Kong, Charlie; Cowie, Bruce; Denman, John A; Liu, Rong

    2016-01-01

    Alkaline polyphosphate has been demonstrated to be able to reduce significant wear and friction of sliding interfaces under heavy loads (>1 GPa) and elevated temperature (800 °C and above) conditions, e.g. hot metal manufacturing. The chemical composition and fine structure of polyphosphate lubricating film is not well understood as well as the role of alkaline elements within the reaction film at hot rubbing surface. This work makes use of the coupling surface analytical techniques on the alkaline polyphosphate tribofilm, XANES, TOF-SIMS and FIB/TEM. The data show the composition in gradient distribution and trilaminar structure of tribofilm: a shorter chain phosphate overlying a long chain polyphosphate that adheres onto oxide steel base through a short chain phosphate. The chemical hardness model well explains the anti-abrasive mechanism of alkaline polyphosphate at elevated temperatures and also predicts a depolymerisation and simultaneous cross-linking of the polyphosphate glass. The role of alkaline elements in the lubrication mechanism is especially explained. This work firstly serves as a basis for a detailed study of alkaline polyphosphate tribofilm at temperature over 600 °C. PMID:27180956

  3. Phosphate, inositol and polyphosphates.

    PubMed

    Livermore, Thomas M; Azevedo, Cristina; Kolozsvari, Bernadett; Wilson, Miranda S C; Saiardi, Adolfo

    2016-02-15

    Eukaryotic cells have ubiquitously utilized the myo-inositol backbone to generate a diverse array of signalling molecules. This is achieved by arranging phosphate groups around the six-carbon inositol ring. There is virtually no biological process that does not take advantage of the uniquely variable architecture of phosphorylated inositol. In inositol biology, phosphates are able to form three distinct covalent bonds: phosphoester, phosphodiester and phosphoanhydride bonds, with each providing different properties. The phosphoester bond links phosphate groups to the inositol ring, the variable arrangement of which forms the basis of the signalling capacity of the inositol phosphates. Phosphate groups can also form the structural bridge between myo-inositol and diacylglycerol through the phosphodiester bond. The resulting lipid-bound inositol phosphates, or phosphoinositides, further expand the signalling potential of this family of molecules. Finally, inositol is also notable for its ability to host more phosphates than it has carbons. These unusual organic molecules are commonly referred to as the inositol pyrophosphates (PP-IPs), due to the presence of high-energy phosphoanhydride bonds (pyro- or diphospho-). PP-IPs themselves constitute a varied family of molecules with one or more pyrophosphate moiety/ies located around the inositol. Considering the relationship between phosphate and inositol, it is no surprise that members of the inositol phosphate family also regulate cellular phosphate homoeostasis. Notably, the PP-IPs play a fundamental role in controlling the metabolism of the ancient polymeric form of phosphate, inorganic polyphosphate (polyP). Here we explore the intimate links between phosphate, inositol phosphates and polyP, speculating on the evolution of these relationships. PMID:26862212

  4. Ether-based nonflammable electrolyte for room temperature sodium battery

    NASA Astrophysics Data System (ADS)

    Feng, Jinkui; Zhang, Zhen; Li, Lifei; Yang, Jian; Xiong, Shenglin; Qian, Yitai

    2015-06-01

    Safety problem is one of the key points that hinder the development of room temperature sodium batteries. In this paper, four well-known nonflammable organic compounds, Trimethyl Phosphate (TMP), Tri(2,2,2-trifluoroethyl) phosphite (TFEP), Dimethyl Methylphosphonate (DMMP), Methyl nonafluorobuyl Ether (MFE), are investigated as nonflammable solvents in sodium batteries for the first time. Among them, MFE is stable towards sodium metal at room temperature. The electrochemical properties and electrode compatibility of MFE based electrolyte are investigated. Both Prussian blue cathode and carbon nanotube anode show good electrochemical performance retention in this electrolyte. The results suggest that MFE is a promising option as nonflammable electrolyte additive for sodium batteries.

  5. Fabrications of zinc-releasing biocement combining zinc calcium phosphate to calcium phosphate cement.

    PubMed

    Horiuchi, Shinya; Hiasa, Masahiro; Yasue, Akihiro; Sekine, Kazumitsu; Hamada, Kenichi; Asaoka, Kenzo; Tanaka, Eiji

    2014-01-01

    Recently, zinc-releasing bioceramics have been the focus of much attention owing to their bone-forming ability. Thus, some types of zinc-containing calcium phosphate (e.g., zinc-doped tricalcium phosphate and zinc-substituted hydroxyapatite) are examined and their osteoblastic cell responses determined. In this investigation, we studied the effects of zinc calcium phosphate (ZCP) derived from zinc phosphate incorporated into calcium phosphate cement (CPC) in terms of its setting reaction and MC3T3-E1 osteoblast-like cell responses. Compositional analysis by powder X-ray diffraction analysis revealed that HAP crystals were precipitated in the CPC containing 10 or 30wt% ZCP after successfully hardening. However, the crystal growth observed by scanning electron microscopy was delayed in the presence of additional ZCP. These findings indicate that the additional zinc inhibits crystal growth and the conversion of CPC to the HAP crystals. The proliferation of the cells and alkaline phosphatase (ALP) activity were enhanced when 10wt% ZCP was added to CPC. Taken together, ZCP added CPC at an appropriate fraction has a potent promotional effect on bone substitute biomaterials. PMID:24090874

  6. Development of Alkaline Oxidative Dissolution Methods for Chromium (III) Compounds Present in Hanford Site Tank Sludges

    SciTech Connect

    Delegard, Calvin H.; Krot, N N.; Shilov, V P.; Fedoseev, A M.; Budantseva, N A.; Nikonov, M V.; Yusov, A B.; Garnov, A Y.; Charushnikova, I A.; Perminov, V P.; Astafurova, L N.; Lapitskaya, T S.; Makarenkov, V I.

    1999-07-02

    The high-level radioactive waste sludge in the underground storage tanks at the Hanford Site contains various chromium solid phases. Dissolution and removal of chromium from tank waste sludges is desirable prior to high-level waste vitrification because increased volume is required to incorporate the residual chromium. Unfortunately, dissolution of chromium from the sludge to form Cr(OH){sub 4}{sup -} through treatment with heated NaOH solution (also used to dissolve aluminum phases and metathesize phosphates to sodium salts) generally has been unsuccessful in tests with both simulated and genuine Hanford waste sludges. Oxidative dissolution of the Cr(III) compounds to form soluble chromate has been proposed as an alternative chromium solid phase dissolution method and results of limited prior testing have been reported. The present systematic tests investigated oxygen gas, hydrogen peroxide, and sodium persulfate oxidants to dissolve Cr(III) under alkaline conditions to form soluble chromate. Permanganate and ozone also were considered for testing but were thought to be of secondary interest because of the insoluble residue (MnO{sub 2} from permanganate) and complex equipment (necessary to generate ozone) implicit with use of these reagents. The oxygen and hydrogen peroxide reagents leave no condensable residue and sodium persulfate only leaves soluble sodium sulfate. Crystalline Cr(OH){sub 3}, various hydrothermally aged amorphous Cr(III) oxide hydrates, mixed Fe(III)/Cr(III) oxide hydrates, and nickel and iron Cr(III) spinels, all of which have been identified or are likely constituents in Hanford tank wastes, were prepared and characterized for the dissolution tests. The effects of reagent and hydroxide concentrations, reaction temperature, and transition metal catalysts on reaction progress were investigated for each reagent as functions of reaction time. Reaction progress was measured by monitoring chromate concentration. Oxidation of chromium compounds by

  7. [Laboratory analogs of cyanobacterial mats of the alkaline geochemical barrier].

    PubMed

    Zavarzin, G A; Orleanskiĭ, V K; Gerasimenko, L M; Pushko, S N; Ushatinskaia, G T

    2003-01-01

    The goal of this work was to illustrate a possible interaction between the "soda continent" and the ocean. A laboratory simulation was undertaken of the development of alkaliphilic mat with calcium carbonate and calcium phosphate interlayers in the zone where ocean waters, containing calcium and manganese, come into contact with carbonate- and phosphate-rich alkaline waters. The macrostructure of the layered cyanobacterial mat turned out to little dependent on the chemical conditions causing sediment formation. The chemical composition of freshly formed mineral interlayers of the mat was found to vary with the medium composition. The mineralogical composition of the sediment is determined by diagenesis conditions in its depth, which can cause mineral phase conversions. PMID:12698798

  8. Zirconium Phosphate Supported MOF Nanoplatelets.

    PubMed

    Kan, Yuwei; Clearfield, Abraham

    2016-06-01

    We report a rare example of the preparation of HKUST-1 metal-organic framework nanoplatelets through a step-by-step seeding procedure. Sodium ion exchanged zirconium phosphate, NaZrP, nanoplatelets were judiciously selected as support for layer-by-layer (LBL) assembly of Cu(II) and benzene-1,3,5-tricarboxylic acid (H3BTC) linkers. The first layer of Cu(II) is attached to the surface of zirconium phosphate through covalent interaction. The successive LBL growth of HKUST-1 film is then realized by soaking the NaZrP nanoplatelets in ethanolic solutions of cupric acetate and H3BTC, respectively. The amount of assembled HKUST-1 can be readily controlled by varying the number of growth cycles, which was characterized by powder X-ray diffraction and gas adsorption analyses. The successful construction of HKUST-1 on NaZrP was also supported by its catalytic performance for the oxidation of cyclohexene. PMID:27175935

  9. Novel alkaline-reduced cuprous oxide/graphene nanocomposites for non-enzymatic amperometric glucose sensor application.

    PubMed

    Yazid, Siti Nur Akmar Mohd; Isa, Illyas Md; Hashim, Norhayati

    2016-11-01

    This paper presents the fabrication of a highly sensitive and selective glucose sensor based on cuprous oxide/graphene nanocomposites-modified glassy carbon electrode (Cu2O/graphene/GCE). The Cu2O/graphene nanocomposites were synthesized based on a simple and straightforward chemical reduction process in alkaline aqueous solution using sodium carbonate as reductant. The size and shape of Cu2O nanoparticles on graphene sheets can be controlled by changing the amount of graphene oxide added during reaction. The electrochemical properties of Cu2O/graphene/GCE in 0.1M phosphate buffer solution were investigated by cyclic voltammetry and electrochemical impedance spectroscopy. It was found that the pH, concentration of supporting electrolyte, and scan rate had very crucial effect on the sensitivity of prepared sensor towards glucose oxidation. At an applied potential of +0.50V, the Cu2O/graphene/GCE presented a high sensitivity of 1330.05μAmM(-1)cm(-2) and fast response (within 3s). The amperometric non-enzymatic glucose sensor developed had a linear relationship from 0.01mM to 3.0mM glucose and detection limit of 0.36μM. In the presence of ascorbic acid, uric acid, dopamine, chloride and citrate ion and other carbohydrates, the interferences were negligible. The proposed sensor was successfully applied for the determination of glucose concentration in real human blood samples. PMID:27524043

  10. Zinc phosphate conversion coatings

    DOEpatents

    Sugama, T.

    1997-02-18

    Zinc phosphate conversion coatings for producing metals which exhibit enhanced corrosion prevention characteristics are prepared by the addition of a transition-metal-compound promoter comprising a manganese, iron, cobalt, nickel, or copper compound and an electrolyte such as polyacrylic acid, polymethacrylic acid, polyitaconic acid and poly-L-glutamic acid to a phosphating solution. These coatings are further improved by the incorporation of Fe ions. Thermal treatment of zinc phosphate coatings to generate {alpha}-phase anhydrous zinc phosphate improves the corrosion prevention qualities of the resulting coated metal. 33 figs.

  11. Zinc phosphate conversion coatings

    DOEpatents

    Sugama, Toshifumi

    1997-01-01

    Zinc phosphate conversion coatings for producing metals which exhibit enhanced corrosion prevention characteristics are prepared by the addition of a transition-metal-compound promoter comprising a manganese, iron, cobalt, nickel, or copper compound and an electrolyte such as polyacrylic acid, polymethacrylic acid, polyitaconic acid and poly-L-glutamic acid to a phosphating solution. These coatings are further improved by the incorporation of Fe ions. Thermal treatment of zinc phosphate coatings to generate .alpha.-phase anhydrous zinc phosphate improves the corrosion prevention qualities of the resulting coated metal.

  12. The alkaline and alkaline-carbonatite magmatism from Southern Brazil

    NASA Astrophysics Data System (ADS)

    Ruberti, E.; Gomes, C. D. B.; Comin-Chiaramonti, P.

    2015-12-01

    Early to Late Cretaceous lasting to Paleocene alkaline magmatism from southern Brazil is found associated with major extensional structural features in and around the Paraná Basin and grouped into various provinces on the basis of several data. Magmatism is variable in size, mode of occurrence and composition. The alkaline rocks are dominantly potassic, a few occurrences showing sodic affinity. The more abundant silicate rocks are evolved undersaturated to saturated in silica syenites, displaying large variation in igneous forms. Less evolved types are restricted to subvolcanic environments and outcrops of effusive suites occur rarely. Cumulatic mafic and ultramafic rock types are very common, particularly in the alkali-carbonatitic complexes. Carbonatite bodies are represented by Ca-carbonatites and Mg-carbonatites and more scarcely by Fe-carbonatites. Available radiometric ages for the alkaline rocks fit on three main chronological groups: around 130 Ma, subcoveal with the Early Cretaceous flood tholeiites of the Paraná Basin, 100-110 Ma and 80-90 Ma (Late Cretaceous). The alkaline magmatism also extends into Paleocene times, as indicated by ages from some volcanic lavas. Geochemically, alkaline potassic and sodic rock types are distinguished by their negative and positive Nb-Ta anomalies, respectively. Negative spikes in Nb-Ta are also a feature common to the associated tholeiitic rocks. Sr-Nd-Pb systematics confirm the contribution of both HIMU and EMI mantle components in the formation of the alkaline rocks. Notably, Early and Late Cretaceous carbonatites have the same isotopic Sr-Nd initial ratios of the associated alkaline rocks. C-O isotopic Sr-Nd isotopic ratios indicate typical mantle signature for some carbonatites and the influence of post-magmatic processes in others. Immiscibility of liquids of phonolitic composition, derived from mafic alkaline parental magmas, has been responsible for the origin of the carbonatites. Close association of alkaline

  13. Flocculation of Kaolin by Waxy Maize Starch Phosphates

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Waxy maize starch phosphates were tested as flocculants in order to determine if they have the potential to replace petroleum-based polymer flocculants currently used commercially. Phosphorylation was carried out by drying heating of starches and sodium orthophosphates at 140 deg C for 4 h. Native...

  14. Flocculation of Kaolin by Waxy Maize Starch Phosphates

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Waxy maize starch phosphates were tested as flocculants in order to determine if they have the potential to replace petroleum-based polymer flocculants currently used commercially. Phosphorylation was carried out by dry heating of starches and sodium orthophosphates at 140 degrees C for 4 hours. N...

  15. Enzymatic Dehairing of Cattlehide with an Alkaline Protease Isolated from Aspergillus tamarii

    Technology Transfer Automated Retrieval System (TEKTRAN)

    An enzymatic dehairing protocol based on the alkaline serine protease isolated from Aspergillus tamarii required 16h, and we observed concomitant grain damage. The use of sodium dodecyl sulfate as a pretreatment to remove the lipids from the hide allowed a shortening of the dehairing time to 6 h wi...

  16. Experimental data developed to support the selection of a treatment process for West Valley alkaline supernatant

    SciTech Connect

    Bray, L.A.; Holton, L.K.; Myers, T.R.; Richardson, G.M.; Wise, B.M.

    1984-01-01

    At the request of West Valley Nuclear Services Co., Inc., the Pacific Northwest Laboratory (PNL) has studied alternative treatment processes for the alkaline PUREX waste presently being stored in Tank 8D2 at West Valley, New York. Five tasks were completed during FY 1983: (1) simulation and characterization of the alkaline supernatant and sludge from the tank. The radiochemical and chemical distributions between the aqueous and solid phase were determined, and the efficiency of washing sludge with water to remove ions such as Na/sup +/ and SO/sub 4//sup 2 -/ was investigated; (2) evaluation of a sodium tetraphenylboron (Na-TPB) precipitation process to recover cesium (Cs) and a sodium titanate (Na-TiA) sorption process to recover strontium (Sr) and plutonium (Pu) from the West Valley Alkaline supernatant. These processes were previously developed and tested at the US Department of Energy's Savannah River Plant; (3) evaluation of an organic cation-exchange resin (Duolite CS-100) to recover Cs and Pu from the alkaline supernatant followed by an organic macroreticular cation exchange resin (Amberlite IRC-718) to recover Sr; (4) evaluation of an inorganic ion exchanger (Linde Ionsiv IE-95) to recover Cs, Sr, and Pu from the alkaline supernatant; and (5) evaluation of Dowex-1,X8 organic anion exchange resin to recover technetium (Tc) from alkaline supernatant. The findings of these tasks are reported. 21 references, 36 figures, 34 tables.

  17. Effects of alkaline concentration, temperature, and additives on the strength of alkaline-induced egg white gel.

    PubMed

    Zhao, Yan; Tu, Yonggang; Li, Jianke; Xu, Mingsheng; Yang, Youxian; Nie, Xuliang; Yao, Yao; Du, Huaying

    2014-10-01

    Egg whites can undergo gelation at extreme pH. In this paper, the effects of NaOH concentration (1.5, 2, 2.5, and 3%), temperature (10, 20, 30, and 40°C), and additives (metallic compounds, carbohydrates, stabilizers, and coagulants) on the strength of alkaline-induced egg white gel were investigated. Results showed that NaOH concentration and induced temperature significantly affected the rate of formation and peak strength of the egg white gel. Of the 6 metallic compounds used in this experiment, CuSO₄exhibited the optimal effect on the strength of alkaline-induced egg white gel, followed by MgCl₂, ZnSO4, PbO, and CaCl₂. When CuSO₄concentration was 0.2%, the gel strength increased by 31.92%. The effect of Fe₂(SO₄)₃was negligible. Of the 5 carbohydrate additives, xanthan gum (0.2%) caused the highest increase (54.31%) in the strength of alkaline-induced egg white gel, followed by sodium alginate, glucose, starch, and sucrose. Meanwhile, propylene glycol (0.25%) caused the highest improvement (15.78%) in the strength of alkaline-induced egg white gel among the 3 stabilizing agents and coagulants used, followed by Na₂HPO₄and glucono-δ-lactone. PMID:25125561

  18. Low sodium level

    MedlinePlus

    Low sodium level is a condition in which the amount of sodium (salt) in the blood is lower than normal. The ... Sodium is found mostly in the body fluids outside the cells. It is very important for maintaining ...

  19. CADMIUM PHOSPHATE GLASS

    DOEpatents

    Carpenter, H.W.; Johnson, P.D.

    1963-04-01

    A method of preparing a cadmium phosphate glass that comprises providing a mixture of solid inorganic compounds of cadmuim and phosphate having vaporizable components and heating the resulting composition to a temperature of at least 850 un. Concent 85% C is presented. (AEC)

  20. Phosphate glasses for radioactive, hazardous and mixed waste immobilization

    DOEpatents

    Cao, Hui; Adams, Jay W.; Kalb, Paul D.

    1998-11-24

    Lead-free phosphate glass compositions are provided which can be used to immobilize low level and/or high level radioactive wastes in monolithic waste forms. The glass composition may also be used without waste contained therein. Lead-free phosphate glass compositions prepared at about 900.degree. C. include mixtures from about 1 mole % to about 6 mole % iron (III) oxide, from about 1 mole % to about 6 mole % aluminum oxide, from about 15 mole % to about 20 mole % sodium oxide or potassium oxide, and from about 30 mole % to about 60 mole % phosphate. The invention also provides phosphate, lead-free glass ceramic glass compositions which are prepared from about 400.degree. C. to about 450.degree. C. and which includes from about 3 mole % to about 6 mole % sodium oxide, from about 20 mole % to about 50 mole % tin oxide, from about 30 mole % to about 70 mole % phosphate, from about 3 mole % to about 6 mole % aluminum oxide, from about 3 mole % to about 8 mole % silicon oxide, from about 0.5 mole % to about 2 mole % iron (III) oxide and from about 3 mole % to about 6 mole % potassium oxide. Method of making lead-free phosphate glasses are also provided.

  1. Phosphate glasses for radioactive, hazardous and mixed waste immobilization

    DOEpatents

    Cao, H.; Adams, J.W.; Kalb, P.D.

    1999-03-09

    Lead-free phosphate glass compositions are provided which can be used to immobilize low level and/or high level radioactive wastes in monolithic waste forms. The glass composition may also be used without waste contained therein. Lead-free phosphate glass compositions prepared at about 900 C include mixtures from about 1 mole % to about 6 mole % iron (III) oxide, from about 1 mole % to about 6 mole % aluminum oxide, from about 15 mole % to about 20 mole % sodium oxide or potassium oxide, and from about 30 mole % to about 60 mole % phosphate. The invention also provides phosphate, lead-free glass ceramic glass compositions which are prepared from about 400 C to about 450 C and which includes from about 3 mole % to about 6 mole % sodium oxide, from about 20 mole % to about 50 mole % tin oxide, from about 30 mole % to about 70 mole % phosphate, from about 3 mole % to about 6 mole % aluminum oxide, from about 3 mole % to about 8 mole % silicon oxide, from about 0.5 mole % to about 2 mole % iron (III) oxide and from about 3 mole % to about 6 mole % potassium oxide. Method of making lead-free phosphate glasses are also provided. 8 figs.

  2. Phosphate glasses for radioactive, hazardous and mixed waste immobilization

    DOEpatents

    Cao, H.; Adams, J.W.; Kalb, P.D.

    1998-11-24

    Lead-free phosphate glass compositions are provided which can be used to immobilize low level and/or high level radioactive wastes in monolithic waste forms. The glass composition may also be used without waste contained therein. Lead-free phosphate glass compositions prepared at about 900 C include mixtures from about 1--6 mole % iron (III) oxide, from about 1--6 mole % aluminum oxide, from about 15--20 mole % sodium oxide or potassium oxide, and from about 30--60 mole % phosphate. The invention also provides phosphate, lead-free glass ceramic glass compositions which are prepared from about 400 C to about 450 C and which includes from about 3--6 mole % sodium oxide, from about 20--50 mole % tin oxide, from about 30--70 mole % phosphate, from about 3--6 mole % aluminum oxide, from about 3--8 mole % silicon oxide, from about 0.5--2 mole % iron (III) oxide and from about 3--6 mole % potassium oxide. Method of making lead-free phosphate glasses are also provided. 8 figs.

  3. Phosphate glasses for radioactive, hazardous and mixed waste immobilization

    DOEpatents

    Cao, Hui; Adams, Jay W.; Kalb, Paul D.

    1999-03-09

    Lead-free phosphate glass compositions are provided which can be used to immobilize low level and/or high level radioactive wastes in monolithic waste forms. The glass composition may also be used without waste contained therein. Lead-free phosphate glass compositions prepared at about 900.degree. C. include mixtures from about 1 mole % to about 6 mole %.iron (III) oxide, from about 1 mole % to about 6 mole % aluminum oxide, from about 15 mole % to about 20 mole % sodium oxide or potassium oxide, and from about 30 mole % to about 60 mole % phosphate. The invention also provides phosphate, lead-free glass ceramic glass compositions which are prepared from about 400.degree. C. to about 450.degree. C. and which includes from about 3 mole % to about 6 mole % sodium oxide, from about 20 mole % to about 50 mole % tin oxide, from about 30 mole % to about 70 mole % phosphate, from about 3 mole % to about 6 mole % aluminum oxide, from about 3 mole % to about 8 mole % silicon oxide, from about 0.5 mole % to about 2 mole % iron (III) oxide and from about 3 mole % to about 6 mole % potassium oxide. Method of making lead-free phosphate glasses are also provided.

  4. Promiscuous sulfatase activity and thio-effects in a phosphodiesterase of the alkaline phosphatase superfamily†

    PubMed Central

    Lassila, Jonathan K.; Herschlag, Daniel

    2009-01-01

    The nucleotide phosphodiesterase/pyrophosphatase from Xanthomonas axonopodis (NPP) is a structural and evolutionary relative of alkaline phosphatase that preferentially hydrolyzes phosphate diesters. With the goal of understanding how these two enzymes with nearly identical Zn2+ bimetallo sites achieve high selectivity for hydrolysis of either phosphate monoesters or diesters, we have measured a promiscuous sulfatase activity in NPP. Sulfate esters are nearly isosteric with phosphate esters but carry less charge, offering a probe of electrostatic contributions to selectivity. NPP exhibits sulfatase activity with kcat/KM value of 2 × 10−5 M−1s−1, similar to the R166S mutant of alkaline phosphatase. We further report the effects of thio-substitution on phosphate monoester and diester reactions. Reactivities with these non-cognate substrates illustrate a reduced dependence of NPP reactivity on the charge of the nonbridging oxygen situated between the Zn2+ ions relative to that in alkaline phosphatase. This reduced charge dependence can explain about 102 of the 107-fold differential catalytic proficiency for the most similar monoester and diester substrates in the two enzymes. The results further suggest that active site contacts to substrate oxygen atoms that do not contact the Zn2+ ions may play an important role in defining the selectivity of the enzymes. PMID:18975918

  5. Production of alkaline protease from Cellulosimicrobium cellulans

    PubMed Central

    Ferracini-Santos, Luciana; Sato, Hélia H

    2009-01-01

    Cellulosimicrobium cellulans is one of the microorganisms that produces a wide variety of yeast cell wall-degrading enzymes, β-1,3-glucanase, protease and chitinase. Dried cells of Saccharomyces cerevisiae were used as carbon and nitrogen source for cell growth and protease production. The medium components KH2PO4, KOH and dried yeast cells showed a significant effect (p<0.05) on the factorial fractional design. A second design was prepared using two factors: pH and percentage of dried yeast cells. The results showed that the culture medium for the maximum production of protease was 0.2 g/l of MgSO4.7H2O, 2.0 g/l of (NH4)2SO4 and 8% of dried yeast cells in 0.15M phosphate buffer at pH 8.0. The maximum alkaline protease production was 7.0 ± 0.27 U/ml over the center point. Crude protease showed best activity at 50ºC and pH 7.0-8.0, and was stable at 50ºC. PMID:24031317

  6. Mode of action of parathyroid hormone and cyclic adenosine 3′,5′-monophosphate on renal tubular phosphate reabsorption in the dog

    PubMed Central

    Agus, Zalman S.; Puschett, Jules B.; Senesky, Dorothy; Goldberg, Martin

    1971-01-01

    To evaluate the effects of parathyroid hormone and cyclic adenosine monophosphate on proximal tubular sodium and phosphate reabsorption, micropuncture studies were performed on dogs that received a highly purified preparation of parathyroid hormone (PTH), dibutyryl cyclic 3′,5′-adenosine monophosphate (cyclic AMP), 5′-AMP, and saline. PTH resulted in a 30-40% inhibition of sodium and phosphate reabsorption in the proximal tubule unassociated with a rise in either total kidney or single nephron glomerular filtration rate (GFR). The bulk of the phosphate rejected proximally was excreted in the final urine while sodium excretion rose minimally despite the marked proximal inhibition, consistent with the presence of reabsorptive sites in the distal nephron for sodium but not phosphate. The infusion of dibutyryl cyclic AMP either systemically or directly into the renal artery inhibited proximal sodium and phosphate reabsorption in the absence of changes in either total kidney or single nephron GFR, resembling the effects of PTH quantitatively and qualitatively. In contrast, another adenine nucleotide, 5′-AMP, did not inhibit the reabsorption of either sodium or phosphate. These observations support the thesis that renal effects of PTH are mediated via stimulation of renal cortical adenyl cyclase. The infusion of a moderate saline load, 25 ml/kg, also produced a similar inhibition of proximal tubular fractional sodium and phosphate reabsorption with a marked phosphaturia but only minimal natriuresis. Thus, changes in sodium and phosphate reabsorption occur in parallel in the proximal tubule when sodium reabsorption is inhibited either with volume expansion or with administration of “specific” phosphaturic agents such as PTH or cyclic AMP. These data are consistent with the thesis that phosphate reabsorption is dependent upon proximal tubular sodium reabsorption wherein the phosphaturic effect of PTH might be the result of a primary inhibition of proximal

  7. Injectable and rapid-setting calcium phosphate bone cement with dicalcium phosphate dihydrate.

    PubMed

    Burguera, Elena F; Xu, Hockin H K; Weir, Michael D

    2006-04-01

    Calcium phosphate cement (CPC) sets in situ with intimate adaptation to the contours of defect surfaces, and forms an implant having a structure and composition similar to hydroxyapatite, the putative mineral in teeth and bones. The objective of the present study was to develop an injectable CPC using dicalcium phosphate dihydrate (DCPD) with a high solubility for rapid setting. Two agents were incorporated to impart injectability and fast-hardening to the cement: a hardening accelerator (sodium phosphate) and a gelling agent (hydroxypropyl methylcellulose, HPMC). The cement with DCPD was designated as CPC(D), and the conventional cement was referred to as CPC(A). Using water without sodium phosphate, CPC(A) had a setting time of 82 +/- 6 min. In contrast, CPC(D) exhibited rapid setting with a time of 17 +/- 1 min. At 0.2 mol/L sodium phosphate, setting time for CPC(D) was 15 +/- 1 min, significantly faster than 40 +/- 2 min for CPC(A) (Tukey's at 0.95). Sodium phosphate decreased the paste injectability (measured as the paste mass extruded from the syringe divided by the original paste mass inside the syringe). However, the addition of HPMC dramatically increased the paste injectability. For CPC(D), the injectability was increased from 65% +/- 12% without HPMC to 98% +/- 1% with 1% HPMC. Injectability of CPC(A) was also doubled to 99% +/- 1%. The injectable and rapid-setting CPC(D) possessed flexural strength and elastic modulus values overlapping the reported values for sintered porous hydroxyapatite implants and cancellous bone. In summary, the rapid setting and relatively high strength and elastic modulus of CPC(D) should help the graft to quickly attain strength and geometrical integrity within a short period of time postoperatively. Furthermore, the injectability of CPC(D) may have potential for procedures involving defects with limited accessibility or narrow cavities, when there is a need for precise placement of the paste, and when using minimally invasive

  8. Alkaline Phosphatase-Mimicking Peptide Nanofibers for Osteogenic Differentiation.

    PubMed

    Gulseren, Gulcihan; Yasa, I Ceren; Ustahuseyin, Oya; Tekin, E Deniz; Tekinay, Ayse B; Guler, Mustafa O

    2015-07-13

    Recognition of molecules and regulation of extracellular matrix synthesis are some of the functions of enzymes in addition to their catalytic activity. While a diverse array of enzyme-like materials have been developed, these efforts have largely been confined to the imitation of the chemical structure and catalytic activity of the enzymes, and it is unclear whether enzyme-mimetic molecules can also be used to replicate the matrix-regulatory roles ordinarily performed by natural enzymes. Self-assembled peptide nanofibers can provide multifunctional enzyme-mimetic properties, as the active sequences of the target enzymes can be directly incorporated into the peptides. Here, we report enhanced bone regeneration efficiency through peptide nanofibers carrying both catalytic and matrix-regulatory functions of alkaline phosphatase, a versatile enzyme that plays a critical role in bone formation by regulating phosphate homeostasis and calcifiable bone matrix formation. Histidine presenting peptide nanostructures were developed to function as phosphatases. These molecules are able to catalyze phosphate hydrolysis and serve as bone-like nodule inducing scaffolds. Alkaline phosphatase-like peptide nanofibers enabled osteogenesis for both osteoblast-like and mesenchymal cell lines. PMID:26039144

  9. Computational Study of Phosphate Vibrations as Reporters of DNA Hydration.

    PubMed

    Floisand, D J; Corcelli, S A

    2015-10-15

    The sensitivity of the phosphate asymmetric stretch vibrational frequency to DNA hydration was investigated with molecular dynamics (MD) simulations and a spectroscopic map relating the vibrational frequency to the electrostatics of its environment. 95% of the phosphate vibrational frequency shift in fully hydrated DNA was due to water within two hydration layers. The phosphate vibration was relatively insensitive to water in the major and minor grooves and to the sodium counterions but was enormously sensitive to water interacting with the DNA backbone. Comparisons to experimental measurements on DNA as a function of relative humidity suggest that one water molecule per phosphate group likely persists at the lowest values of the relative humidity. Finally, the calculated spectral diffusion dynamics show that water in the vicinity of the DNA backbone is slowed by a factor of ∼5, in agreement with NMR and solvation dynamics experiments, as well as previous MD simulations. PMID:26722770

  10. Diclofenac sodium.

    PubMed

    Small, R E

    1989-08-01

    The pharmacology, pharmacokinetics, clinical efficacy, adverse effects, and dosage of diclofenac sodium are reviewed. Diclofenac, the first nonsteroidal anti-inflammatory agent (NSAID) to be approved that is a phenylacetic acid derivative, competes with arachidonic acid for binding to cyclo-oxygenase, resulting in decreased formation of prostaglandins. The drug has both analgesic and antipyretic activities. Diclofenac is efficiently absorbed from the gastrointestinal tract; peak plasma concentrations occur 1.5 to 2.0 hours after ingestion in fasting subjects. Even though diclofenac has a relatively short elimination half-life in plasma (1.5 hours), it persists in synovial fluid. The drug is metabolized in the liver and is eliminated by urinary and biliary excretion. In clinical trials, diclofenac was as effective as aspirin, diflunisal, indomethacin, sulindac, ibuprofen, ketoprofen, and naproxen in improving function and reducing pain in patients with rheumatoid arthritis. For treatment of osteoarthritis, diclofenac was equivalent in efficacy to aspirin, diflunisal, indomethacin, sulindac, ibuprofen, ketoprofen, naproxen, flurbiprofen, mefenamic acid, and piroxicam. Diclofenac was as effective as indomethacin or sulindac in treating ankylosing spondylitis. The most frequent adverse effects reported for diclofenac were gastrointestinal, but these effects were fewer and less serious than occurred with aspirin or indomethacin; in addition, diclofenac caused fewer central nervous system reactions than indomethacin. Diclofenac is administered in divided doses with meals. The recommended total daily dosage is 100 to 150 mg (osteoarthritis and ankylosing spondylitis) or 150 to 200 mg (rheumatoid arthritis). Diclofenac is effective, but no more so than other NSAIDs. It is structurally distinct and offers another choice in the treatment of rheumatological conditions. PMID:2670397

  11. A micropuncture investigation of electrolyte transport in the parotid glands of sodium-replete and sodium-depleted sheep.

    PubMed Central

    Compton, J S; Nelson, J; Wright, R D; Young, J A

    1980-01-01

    1. Parotid secretion has been studied by micropuncture in sodium-replete and sodium-deficient sheep. 2. The osmolality of unstimulated primary saliva was slightly higher than in plasma and fell following cholinergic nerve stimulation. In sodium-depleted animals the osmolality of final saliva was hypotonic and exhibited flow dependency, where as in sodium-replete animals it was always isotonic. 3. In sodium-replete sheep, the primary fluid sodium concentration was about 120-130 mmol l-1 but in final saliva it was about 167 mmol l-1 and showed little or no flow-dependency. In sodium-depleted sheep, the primary sodium concentration averaged only 82.2 mmol l-1 and it was concluded that sodium-depleted primary fluid contained some other unidentified solute that allowed it to remain approximately isotonic; in final saliva the unstimulated sodium concentration was about 40 mmol l-1 and it rose with increasing flow rate to a maximum of 114.9 mmol l-1. 4. The primary fluid potassium concentration in sodium-replete animals did not differ significantly from that seen in sodium-depleted animals and the values were uninfluenced by stimulation; the over-all mean value was 11.2 mmol l-1. In final saliva, in sodium-replete sheep, the potassium concentrations averaged 7.8 mmol l-1 but in sodium-depleted sheep the concentrations were between 5 and 10 times greater than in primary fluid. 5. It was calculated from the equilibrium pH that the primary bicarbonate concentration would have been about 35 mmol l-1. In final saliva, where bicarbonate was measured directly, the concentrations were much greater and increased with stimulation to about 115 mmol l-1. 6. The primary fluid phosphate and chloride concentrations were the same in both sodium-replete and sodium-depleted animals and were unchanged by stimulation; the mean concentration of phosphate was 1.30 mmol l-1 and of chloride, 53.0 mmol l-1. In final saliva the phosphate concentrations were little changed but the chloride

  12. Phosphates in some missouri refractory clays

    USGS Publications Warehouse

    Hall, R.B.; Foord, E.E.; Keller, D.J.; Keller, W.D.

    1997-01-01

    . The wavellite and variscite-strengite veinlets are secondary, precipitated from ion complexes in ground water percolating along cracks in the flint clay. The flint clay host of the variscite-strengite veinlet contains strontian crandallite. All of the phosphates contain significant amounts of strontium. The source of P, Ca and Sr was the marine carbonates. Dissolution of these carbonates produced the argillic residue that became the primordial Cheltenham paludal mud, which ultimately altered to fireclay. Preliminary firing tests show that the presence of phosphates lowers fusion temperature. However, it is not clear whether poor refractoriness is due to the presence of phosphates, per se, or to Ca, Sr and other alkaline elements present in the phosphates.

  13. RECLAMATION OF ALKALINE ASH PILES

    EPA Science Inventory

    The objective of the study was to develop methods for reclaiming ash disposal piles for the ultimate use as agricultural or forest lands. The ashes studied were strongly alkaline and contained considerable amounts of salts and toxic boron. The ashes were produced from burning bit...

  14. Sodium blood test

    MedlinePlus

    ... foods. The most common form of sodium is sodium chloride, which is table salt. This test is usually done as part of an electrolyte or basic metabolic panel blood test . Your blood sodium level represents a balance between the sodium and ...

  15. Response of Desulfovibrio vulgaris to Alkaline Stress

    SciTech Connect

    Stolyar, S.; He, Q.; He, Z.; Yang, Z.; Borglin, S.E.; Joyner, D.; Huang, K.; Alm, E.; Hazen, T.C.; Zhou, J.; Wall, J.D.; Arkin, A.P.; Stahl, D.A.

    2007-11-30

    The response of exponentially growing Desulfovibrio vulgarisHildenborough to pH 10 stress was studied using oligonucleotidemicroarrays and a study set of mutants with genes suggested by microarraydata to be involved in the alkaline stress response deleted. The datashowed that the response of D. vulgaris to increased pH is generallysimilar to that of Escherichia coli but is apparently controlled byunique regulatory circuits since the alternative sigma factors (sigma Sand sigma E) contributing to this stress response in E. coli appear to beabsent in D. vulgaris. Genes previously reported to be up-regulated in E.coli were up-regulated in D. vulgaris; these genes included three ATPasegenes and a tryptophan synthase gene. Transcription of chaperone andprotease genes (encoding ATP-dependent Clp and La proteases and DnaK) wasalso elevated in D. vulgaris. As in E. coli, genes involved in flagellumsynthesis were down-regulated. The transcriptional data also identifiedregulators, distinct from sigma S and sigma E, that are likely part of aD. vulgaris Hildenborough-specific stress response system.Characterization of a study set of mutants with genes implicated inalkaline stress response deleted confirmed that there was protectiveinvolvement of the sodium/proton antiporter NhaC-2, tryptophanase A, andtwo putative regulators/histidine kinases (DVU0331 andDVU2580).

  16. Selective flotation of phosphate minerals with hydroxamate collectors

    DOEpatents

    Miller, Jan D.; Wang, Xuming; Li, Minhua

    2002-01-01

    A method is disclosed for separating phosphate minerals from a mineral mixture, particularly from high-dolomite containing phosphate ores. The method involves conditioning the mineral mixture by contacting in an aqueous in environment with a collector in an amount sufficient for promoting flotation of phosphate minerals. The collector is a hydroxamate compound of the formula; ##STR1## wherein R is generally hydrophobic and chosen such that the collector has solubility or dispersion properties it can be distributed in the mineral mixture, typically an alkyl, aryl, or alkylaryl group having 6 to 18 carbon atoms. M is a cation, typically hydrogen, an alkali metal or an alkaline earth metal. Preferably, the collector also comprises an alcohol of the formula, R'--OH wherein R' is generally hydrophobic and chosen such that the collector has solubility or dispersion properties so that it can be distributed in the mineral mixture, typically an alkyl, aryl, or alkylaryl group having 6 to 18 carbon atoms.

  17. Enteral administration of monosodium phosphate, monopotassium phosphate and monocalcium phosphate for the treatment of hypophosphataemia in lactating dairy cattle.

    PubMed

    Idink, M J; Grünberg, W

    2015-05-01

    Hypohosphataemia is a frequent finding in early lactating and anorectic dairy cows. Sodium phosphate is commonly used for oral phosphorus (P) supplementation, although other phosphate salts may present useful treatment alternatives. Objectives of this study were to compare the efficacy of monopotassium phosphate (KH2PO4) and monocalcium phosphate (Ca(H2PO4)2) to monosodium phosphate (NaH2PO4) in P-depleted cows. Furthermore, the effect of concentrated NaH2PO4 on the reticular groove reflex was studied. Six healthy but P-depleted dairy cows underwent four treatments in randomised order. Treatments consisted of intraruminal administration of NaH2PO4, KH2PO4 and Ca(H2PO4)2 providing the equivalent of 60 g P. A fourth treatment consisting of concentrated NaH2PO4 combined with acetaminophen as a marker substance was administered orally to determine whether the reticular groove reflex could be induced. Intraruminal administration of NaH2PO4 and KH2PO4 resulted in similar increases in plasma Pi concentrations ([Pi]) while intraruminal Ca(H2PO4)2 resulted in lower increases in plasma [Pi]. Oral and intraruminal administration of NaH2PO4 resulted in similar times to peak plasma [Pi] and acetaminophen concentration, indicating that concentrated NaH2PO4 administered orally did not trigger the reticular groove reflex. These results suggest that oral administration of KH2PO4 is equally effective as NaH2PO4. Oral administration of Ca(H2PO4)2 in contrast has a less pronounced effect on the plasma [Pi]. PMID:25721509

  18. Proteinuria Increases Plasma Phosphate by Altering Its Tubular Handling.

    PubMed

    de Seigneux, Sophie; Courbebaisse, Marie; Rutkowski, Joseph M; Wilhelm-Bals, Alexandra; Metzger, Marie; Khodo, Stellor Nlandu; Hasler, Udo; Chehade, Hassib; Dizin, Eva; Daryadel, Arezoo; Stengel, Bénedicte; Girardin, E; Prié, Dominique; Wagner, Carsten A; Scherer, Philipp E; Martin, Pierre-Yves; Houillier, Pascal; Feraille, Eric

    2015-07-01

    Proteinuria and hyperphosphatemia are cardiovascular risk factors independent of GFR. We hypothesized that proteinuria induces relative phosphate retention via increased proximal tubule phosphate reabsorption. To test the clinical relevance of this hypothesis, we studied phosphate handling in nephrotic children and patients with CKD. Plasma fibroblast growth factor 23 (FGF-23) concentration, plasma phosphate concentration, and tubular reabsorption of phosphate increased during the proteinuric phase compared with the remission phase in nephrotic children. Cross-sectional analysis of a cohort of 1738 patients with CKD showed that albuminuria≥300 mg/24 hours is predictive of higher phosphate levels, independent of GFR and other confounding factors. Albuminuric patients also displayed higher plasma FGF-23 and parathyroid hormone levels. To understand the molecular mechanisms underlying these observations, we induced glomerular proteinuria in two animal models. Rats with puromycin-aminonucleoside-induced nephrotic proteinuria displayed higher renal protein expression of the sodium-phosphate co-transporter NaPi-IIa, lower renal Klotho protein expression, and decreased phosphorylation of FGF receptor substrate 2α, a major FGF-23 receptor substrate. These findings were confirmed in transgenic mice that develop nephrotic-range proteinuria resulting from podocyte depletion. In vitro, albumin did not directly alter phosphate uptake in cultured proximal tubule OK cells. In conclusion, we show that proteinuria increases plasma phosphate concentration independent of GFR. This effect relies on increased proximal tubule NaPi-IIa expression secondary to decreased FGF-23 biologic activity. Proteinuria induces elevation of both plasma phosphate and FGF-23 concentrations, potentially contributing to cardiovascular disease. PMID:25349200

  19. Bacillus cereus Phosphopentomutase Is an Alkaline Phosphatase Family Member That Exhibits an Altered Entry Point into the Catalytic Cycle

    SciTech Connect

    Panosian, Timothy D.; Nannemann, David P.; Watkins, Guy R.; Phelan, Vanessa V.; McDonald, W. Hayes; Wadzinski, Brian E.; Bachmann, Brian O.; Iverson, Tina M.

    2011-09-15

    Bacterial phosphopentomutases (PPMs) are alkaline phosphatase superfamily members that interconvert {alpha}-D-ribose 5-phosphate (ribose 5-phosphate) and {alpha}-D-ribose 1-phosphate (ribose 1-phosphate). We investigated the reaction mechanism of Bacillus cereus PPM using a combination of structural and biochemical studies. Four high resolution crystal structures of B. cereus PPM revealed the active site architecture, identified binding sites for the substrate ribose 5-phosphate and the activator {alpha}-D-glucose 1,6-bisphosphate (glucose 1,6-bisphosphate), and demonstrated that glucose 1,6-bisphosphate increased phosphorylation of the active site residue Thr-85. The phosphorylation of Thr-85 was confirmed by Western and mass spectroscopic analyses. Biochemical assays identified Mn{sup 2+}-dependent enzyme turnover and demonstrated that glucose 1,6-bisphosphate treatment increases enzyme activity. These results suggest that protein phosphorylation activates the enzyme, which supports an intermolecular transferase mechanism. We confirmed intermolecular phosphoryl transfer using an isotope relay assay in which PPM reactions containing mixtures of ribose 5-[{sup 18}O{sub 3}]phosphate and [U-{sup 13}C{sub 5}]ribose 5-phosphate were analyzed by mass spectrometry. This intermolecular phosphoryl transfer is seemingly counter to what is anticipated from phosphomutases employing a general alkaline phosphatase reaction mechanism, which are reported to catalyze intramolecular phosphoryl transfer. However, the two mechanisms may be reconciled if substrate encounters the enzyme at a different point in the catalytic cycle.

  20. Metal-phosphate binders

    DOEpatents

    Howe, Beth Ann [Lewistown, IL; Chaps-Cabrera, Jesus Guadalupe [Coahuila, MX

    2009-05-12

    A metal-phosphate binder is provided. The binder may include an aqueous phosphoric acid solution, a metal-cation donor including a metal other than aluminum, an aluminum-cation donor, and a non-carbohydrate electron donor.

  1. Isolation of alkaline mutagens from complex mixtures

    SciTech Connect

    Ho, C.H.; Guerin, M.R.; Clark, B.R.; Rao, T.K.; Epler, J.L.

    1981-05-01

    A method for the preparative-scale enrichment of alkaline mutagens from complex natural and anthropogenic mixtures is described. Mutagenic alkaline fractions were isolated from cigarette smoke, crude petroleum, and petroleum substitutes derived from coal and shale.

  2. Purification and characterization of an extracellular alkaline phosphatase from Penicillium chrysogenum.

    PubMed

    Politino, M; Brown, J; Usher, J J

    1996-01-01

    An extracellular alkaline phosphatase from Penicillium chrysogenum was purified to homogeneity using DEAE ion-exchange chromatography and size exclusion chromatography. SDS-PAGE of the purified enzyme indicated a molecular weight of 58,000. The mobility of the native enzyme on a Superose 12 column suggests that the active form of the enzyme is a monomer. The enzyme catalyzes the hydrolysis of phosphate from a variety of substrates including p-nitrophenyl phosphate, alpha-naphthyl phosphate and the anti-tumor compound etoposide phosphate. The apparent K(m) for the substrate p-nitrophenyl phosphate is 1.3 mM and the enzyme is inhibited by inorganic phosphate. The pH optimum of the enzyme is 9.0 with a broad optimal temperature range between 40 and 50 degrees C. The isoelectric point of the enzyme is approximately 5.5. The enzyme is a glycoprotein; digestion with endoglycosidase H indicates that the protein consists primarily of N-linked carbohydrates. Enzymatic activity is enhanced by the addition of divalent cations such as Mg+2 and Mn+2 and inhibited by addition of a chelator such as EDTA suggesting a metal ion requirement. The enzyme was found to be an inexpensive catalyst for the conversion of etoposide phosphate to etoposide in the manufacture of this anti-tumor compound. PMID:8958566

  3. Phosphate control in dialysis

    PubMed Central

    Cupisti, Adamasco; Gallieni, Maurizio; Rizzo, Maria Antonietta; Caria, Stefania; Meola, Mario; Bolasco, Piergiorgio

    2013-01-01

    Prevention and correction of hyperphosphatemia is a major goal of chronic kidney disease–mineral and bone disorder (CKD–MBD) management, achievable through avoidance of a positive phosphate balance. To this aim, optimal dialysis removal, careful use of phosphate binders, and dietary phosphate control are needed to optimize the control of phosphate balance in well-nourished patients on a standard three-times-a-week hemodialysis schedule. Using a mixed diffusive–convective hemodialysis tecniques, and increasing the number and/or the duration of dialysis tecniques are all measures able to enhance phosphorus (P) mass removal through dialysis. However, dialytic removal does not equal the high P intake linked to the high dietary protein requirement of dialysis patients; hence, the use of intestinal P binders is mandatory to reduce P net intestinal absorption. Unfortunately, even a large dose of P binders is able to bind approximately 200–300 mg of P on a daily basis, so it is evident that their efficacy is limited in the case of an uncontrolled dietary P load. Hence, limitation of dietary P intake is needed to reach the goal of neutral phosphate balance in dialysis, coupled to an adequate protein intake. To this aim, patients should be informed and educated to avoid foods that are naturally rich in phosphate and also processed food with P-containing preservatives. In addition, patients should preferentially choose food with a low P-to-protein ratio. For example, patients could choose egg white or protein from a vegetable source. Finally, boiling should be the preferred cooking procedure, because it induces food demineralization, including phosphate loss. The integrated approach outlined in this article should be actively adapted as a therapeutic alliance by clinicians, dieticians, and patients for an effective control of phosphate balance in dialysis patients. PMID:24133374

  4. Modelling of calcium phosphates

    NASA Astrophysics Data System (ADS)

    Calderin Hidalgo, Lazaro Juan

    This work is a contribution to a large scale joint experimental and theoretical effort to understand the biological properties of silicon doped calcium phosphates undertaken by Queen's University and Millenium Biologix Corp. We have modeled calcium phosphates and silicon doped calcium phosphates in close relation to experiment in order to study possible location of silicon in the lattice. Density functional theory has been used to study the structural and dynamical properties of small systems of calcium phosphates to gain preliminary information on phosphates and the performance of the theoretical methods. The same methods were used to investigate structural and electronic properties of larger scale calcium phosphate systems, while a classical shell model was developed to investigate the dynamical properties of such large and complex systems. In the context of the shell model a method was devised to calculate the dynamical matrix corrected for the long range Coulomb interaction in the long wave length limit. It was necessary also to develop a theoretical expression for the dielectric function in the context of the shell model. Infrared spectra and thermal parameters were calculated based on these methods. We also propose some directions for future research.

  5. Nucleotide sequences encoding a thermostable alkaline protease

    DOEpatents

    Wilson, David B.; Lao, Guifang

    1998-01-01

    Nucleotide sequences, derived from a thermophilic actinomycete microorganism, which encode a thermostable alkaline protease are disclosed. Also disclosed are variants of the nucleotide sequences which encode a polypeptide having thermostable alkaline proteolytic activity. Recombinant thermostable alkaline protease or recombinant polypeptide may be obtained by culturing in a medium a host cell genetically engineered to contain and express a nucleotide sequence according to the present invention, and recovering the recombinant thermostable alkaline protease or recombinant polypeptide from the culture medium.

  6. Nucleotide sequences encoding a thermostable alkaline protease

    DOEpatents

    Wilson, D.B.; Lao, G.

    1998-01-06

    Nucleotide sequences, derived from a thermophilic actinomycete microorganism, which encode a thermostable alkaline protease are disclosed. Also disclosed are variants of the nucleotide sequences which encode a polypeptide having thermostable alkaline proteolytic activity. Recombinant thermostable alkaline protease or recombinant polypeptide may be obtained by culturing in a medium a host cell genetically engineered to contain and express a nucleotide sequence according to the present invention, and recovering the recombinant thermostable alkaline protease or recombinant polypeptide from the culture medium. 3 figs.

  7. Transpassive electrodissolution of depleted uranium in alkaline electrolytes

    SciTech Connect

    Weisbrod, K.R.; Schake, A.R.; Morgan, A.N.; Purdy, G.M.; Martinez, H.E.; Nelson, T.O.

    1998-03-01

    To aid in removal of oralloy from the nuclear weapons stockpile, scientists at the Los Alamos National Laboratory Plutonium Facility are decontaminating oralloy parts by electrodissolution in neutral to alkaline electrolytes composed of sodium nitrate and sodium sulfate. To improve the process, electrodissolution experiments were performed with depleted uranium to understand the effects of various operating parameters. Sufficient precipitate was also produced to evaluate the feasibility of using ultrafiltration to separate the uranium oxide precipitates from the electrolyte before it enters the decontamination fixture. In preparation for the experiments, a potential-pH diagram for uranium was constructed from thermodynamic data for fully hydrated species. Electrodissolution in unstirred solutions showed that uranium dissolution forms two layers, an acidic bottom layer rich in uranium and an alkaline upper layer. Under stirred conditions results are consistent with the formation of a yellow precipitate of composition UO{sub 3}{center_dot}2H{sub 2}O, a six electron process. Amperometric experiments showed that current efficiency remained near 100% over a wide range of electrolytes, electrolyte concentrations, pH, and stirring conditions.

  8. CHARACTERIZATION OF HIGH PHOSPHATE RADIOACTIVE TANK WASTE AND SIMULANT DEVELOPMENT

    SciTech Connect

    Lumetta, Gregg J.; McNamara, Bruce K.; Buck, Edgar C.; Fiskum, Sandra K.; Snow, Lanee A.

    2009-10-15

    A sample of high-level radioactive tank waste was characterized to provide a basis for developing a waste simulant. The simulant is required for engineered-scaled testing of pretreatment processes in a non-radiological facility. The waste material examined was derived from the bismuth phosphate process, which was the first industrial process implemented to separate plutonium from irradiated nuclear fuel. The bismuth phosphate sludge is a complex mixture rich in bismuth, iron, sodium, phosphorus, silicon, and uranium. The form of phosphorus in this particular tank waste material is of specific importance because that is the primary component (other than water-soluble sodium salts) that must be removed from the high-level waste solids by pretreatment. This work shows unequivocally that the phosphorus present in this waste material is not present as bismuth phosphate. Rather, the phosphorus appears to be incorporated mostly into an amorphous iron(III) phosphate species. The bismuth in the sludge solids is best described as bismuth ferrite, BiFeO3. Infrared spectral data, microscopy, and thermal analysis data are presented to support these conclusions. The behavior of phosphorus during caustic leaching of the bismuth phosphate sludge solids is also discussed.

  9. Silk fibroin/sodium alginate fibrous hydrogels regulated hydroxyapatite crystal growth.

    PubMed

    Ming, Jinfa; Jiang, Zhijuan; Wang, Peng; Bie, Shiyu; Zuo, Baoqi

    2015-06-01

    Use of organic templates for controlling the growth of inorganic crystals is one of the research topics in biomimetic field. In particular, oriented growth of hydroxyapatite (HAp) in organic fibrous matrix is provided a new view angle to study biomineralization of bone and its potential biomedical applications. The crystallization of HAp in fibrous hydrogels could mimic such biomineralization. In this paper, we report HAp nanorod crystal synthesized successfully by a biomimetic method using calcium chloride and ammonium dihydrogen phosphate as reagents in the presence of silk fibroin/sodium alginate (SF/SA) fibrous hydrogels. The effects of influence factors such as mineral times, pH, and temperature on controlling HAp nanorod crystals are discussed. The elongated HAp nanorods with rectangular column are grown with the increase of mineral times in biomimetic process. By changing pH, HAp nanorod crystals are obtained at alkaline condition in fibrous hydrogels. Moreover, compared to other temperatures, rod-shaped HAp crystals were formed at 20°C. The results imply this to be an effective method for preparing HAp crystals with controllable morphology for bone repair application. PMID:25842137

  10. Effect of Nutrient/Carbon Supplements on Biological Phosphate and Nitrate Uptake by Protozoan Isolates

    NASA Astrophysics Data System (ADS)

    Akpor, O. B.; Momba, M. N. B.; Okonkwo, J.

    This study was aimed at investigating the effect of nine different nutrient/carbon supplements in mixed liquor on nutrient uptake ability of three wastewater protozoan isolates, which have previously been screened for phosphate and nitrate uptake efficiency. The results revealed that over 50% of phosphate was removed in the presence of sodium acetate, glucose or sucrose. Similarly, nitrate uptake of over 60% was observed in the presence of sodium acetate, sodium succinate, glucose or sucrose. These trends were common in all the isolates. Chemical Oxygen Demand (COD) removal in the mixed liquor was only found to be significantly removed in mixed liquors that were supplemented with glucose, sucrose or sodium succinate. In the presence of sodium acetate, COD was observed to increase. The findings of this investigation have revealed that nutrient uptake and COD removal by the test protozoan isolates may be dependent primarily on the initial nutrient supplement in mixed liquor.

  11. Process for making boron nitride using sodium cyanide and boron

    DOEpatents

    Bamberger, Carlos E.

    1990-02-06

    This a very simple process for making boron nitride by mixing sodium cyanide and boron phosphate and heating the mixture in an inert atmosphere until a reaction takes place. The product is a white powder of boron nitride that can be used in applications that require compounds that are stable at high temperatures and that exhibit high electrical resistance.

  12. Process for making boron nitride using sodium cyanide and boron

    DOEpatents

    Bamberger, Carlos E.

    1990-01-01

    This a very simple process for making boron nitride by mixing sodium cyanide and boron phosphate and heating the mixture in an inert atmosphere until a reaction takes place. The product is a white powder of boron nitride that can be used in applications that require compounds that are stable at high temperatures and that exhibit high electrical resistance.

  13. Smart nanoprobes for the detection of alkaline phosphatase activity during osteoblast differentiation.

    PubMed

    Lim, Eun-Kyung; Keem, Joo Oak; Yun, Hui-suk; Jung, Jinyoung; Chung, Bong Hyun

    2015-02-21

    Gold nanoparticle-conjugated fluorescent hydroxyapatite (AuFHAp) was developed as a smart nanoprobe for measuring alkaline phosphatase (ALP) activity. AuFHAp showed NIR fluorescence due to the hydrolysis of its phosphate groups by ALP. In addition, gold nanoparticles help reduce the nonspecific signal by absorbing nonspecific fluorescence. Through in vitro tests, we confirmed that the AuFHAp probe was capable of detecting ALP levels related to osteoblast activity in living cells with high fluorescence intensity. PMID:25623488

  14. Heavy metals stabilization in medical waste incinerator fly ash using alkaline assisted supercritical water technology.

    PubMed

    Jin, Jian; Li, Xiaodong; Chi, Yong; Yan, Jianhua

    2010-12-01

    This study investigated the process of aluminosilicate formation in medical waste incinerator fly ash containing large amounts of heavy metals and treated with alkaline compounds at 375 degrees C and examined how this process affected the mobility and availability of the metals. As a consequence of the treatments, the amount of dissolved heavy metals, and thus their mobility, was greatly reduced, and the metal leaching concentration was below the legislative regulations for metal leachability. Moreover, this process did not produce a high concentration of heavy metals in the effluent. The addition of alkaline compounds such as sodium hydroxide and sodium carbonate can prevent certain heavy metal ions dissolving in water. In comparison with the alkaline-free condition, the extracted concentrations of As, Mn, Pb, Sr and Zn were decreased by about 51.08, 97.22, 58.33, 96.77 and 86.89% by the addition of sodium hydroxide and 66.18, 86.11, 58.33, 83.87 and 81.91% by the addition of sodium carbonate. A mechanism for how the formation of aluminosilicate occurred in supercritical water and affected the mobility and availability of the heavy metals is discussed. The reported results could be useful as basic knowledge for planning new technologies for the hydrothermal stabilization of heavy metals in fly ash. PMID:20430801

  15. Monte Carlo simulation of DNA fragment hydration in the presence of alkaline cations using novel atom-atom potential functions.

    PubMed

    Teplukhin, A V; Malenkov, G G; Poltev, V I

    1998-10-01

    The set of atom-atom potential functions specially adjusted to simulation of nucleic acid fragment hydration (Poltev, Grokhlina & Malenkov, J. Biomol. Struct. Dyn. 2, 413, 1984) is extended by including alkaline cation interactions. The choice of new potential functions was realized using experimental data on crystal hydrates of nucleotides and related compounds as well as thermodynamic data on ion solutions. The extended set of potential functions allows to reproduce many features of interactions between alkaline cations and nucleic acid fragments in water solutions. The sites of preferential cation localization near bases and phosphate groups were obtained and examined. The potential functions reproduce the dissociation tendency of cation-phosphate group and cation-base complexes in aqueous medium. Pathways of cation dissociations from nucleic acid components have been studied, and metastable water-bridged positions of cations near bases and phosphate group have been revealed. PMID:9833668

  16. Effect of Phosphate, Fluoride, and Nitrate on Gibbsite Dissolution Rate and Solubility

    SciTech Connect

    Herting, Daniel L.

    2014-01-29

    Laboratory tests have been completed with simulated tank waste samples to investigate the effects of phosphate, fluoride, and nitrate on the dissolution rate and equilibrium solubility of gibbsite in sodium hydroxide solution at 22 and 40{degrees}C. Results are compared to relevant literature data and to computer model predictions. The presence of sodium nitrate (3 M) caused a reduction in the rate of gibbsite dissolution in NaOH, but a modest increase in the equilibrium solubility of aluminum. The increase in solubility was not as large, though, as the increase predicted by the computer model. The presence of phosphate, either as sodium phosphate or sodium fluoride phosphate, had a negligible effect on the rate of gibbsite dissolution, but caused a slight increase in aluminum solubility. The magnitude of the increased solubility, relative to the increase caused by sodium nitrate, suggests that the increase is due to ionic strength (or water activity) effects, rather than being associated with the specific ion involved. The computer model predicted that phosphate would cause a slight decrease in aluminum solubility, suggesting some Al-PO4 interaction. No evidence was found of such an interaction.

  17. Development of alkaline fuel cells.

    SciTech Connect

    Hibbs, Michael R.; Jenkins, Janelle E.; Alam, Todd Michael; Janarthanan, Rajeswari; Horan, James L.; Caire, Benjamin R.; Ziegler, Zachary C.; Herring, Andrew M.; Yang, Yuan; Zuo, Xiaobing; Robson, Michael H.; Artyushkova, Kateryna; Patterson, Wendy; Atanassov, Plamen Borissov

    2013-09-01

    This project focuses on the development and demonstration of anion exchange membrane (AEM) fuel cells for portable power applications. Novel polymeric anion exchange membranes and ionomers with high chemical stabilities were prepared characterized by researchers at Sandia National Laboratories. Durable, non-precious metal catalysts were prepared by Dr. Plamen Atanassov's research group at the University of New Mexico by utilizing an aerosol-based process to prepare templated nano-structures. Dr. Andy Herring's group at the Colorado School of Mines combined all of these materials to fabricate and test membrane electrode assemblies for single cell testing in a methanol-fueled alkaline system. The highest power density achieved in this study was 54 mW/cm2 which was 90% of the project target and the highest reported power density for a direct methanol alkaline fuel cell.

  18. Specificity of hydrolysis of phytic acid by alkaline phytase from lily pollen.

    PubMed Central

    Barrientos, L; Scott, J J; Murthy, P P

    1994-01-01

    Phytases are the primary enzymes responsible for the hydrolysis of phytic acid, myo-inositol-1,2,3,4,5,6-hexakisphosphate (I-1,2,3,4,5,6-P6). A number of phytases with varying specificities, properties, and localizations hydrolyze phytic acid present in cells. The specificity of hydrolysis of phytic acid by alkaline phytase from lily (Lilium longiflorum L.) pollen is described. Structures of the intermediate inositol phosphates and the final product were established by a variety of nuclear magnetic resonance techniques (1H-, 31P-, and 31P-1H-detected multiple quantum coherence spectroscopy, and total correlation spectroscopy). On the basis of the structures identified we have proposed a scheme of hydrolysis of phytic acid. Initial hydrolysis of the phosphate ester occurs at the D-5 position of phytic acid to yield the symmetrical I-1,2,3,4,6-P5. The two subsequent dephosphorylations occur adjacent to the D-5 hydroxyl group to yield I-1,2,3-P3 as the final product. Alkaline phytase differs from other phytases in the specificity of hydrolysis of phosphate esters on the inositol ring, its high substrate specificity for phytic acid, and biochemical properties such as susceptibility to activation by calcium and inhibition by fluoride. The physiological significance of alkaline phytase and the biological role of I-1,2,3-P3 remain to be identified. PMID:7846160

  19. Application of intracellular alkaline phosphatase activity measurement in detection of neutrophil adherence in vitro.

    PubMed

    Bednarska, Katarzyna; Klink, Magdalena; Sulowska, Zofia

    2006-01-01

    We have proposed the use of the fluorimetric method with 4-methylumbelliferyl phosphate (4-MUP) specific substrate for the alkaline phosphatase determination in the neutrophil adhesion assay. We provide evidence that the endogenous neutrophil alkaline phosphatase (NAP) activity evaluation is reliable to quantify neutrophil adhesion at a wide range of cell numbers (10(4)-10(6)). The results obtained by fluorimetric NAP activity test correlate to the results of adherence evaluated using the MTT reduction assay. The fluorimetric NAP activity test may be applied for resting as well as activated neutrophils without the risk of the activators interferences into the test. The alkaline phosphatase survey with the use of 4-MUP substrate is recommended herein as a sensitive, repeatable, simple, and reliable method of the neutrophil adherence determination in vitro. PMID:17047286

  20. Overproduction of acetate kinase activates the phosphate regulon in the absence of the phoR and phoM functions in Escherichia coli.

    PubMed Central

    Lee, T Y; Makino, K; Shinagawa, H; Nakata, A

    1990-01-01

    A DNA fragment of Escherichia coli cloned on pBR322 elevated the production of alkaline phosphatase and phosphate-binding protein in a phoR phoM strain. Nucleotide sequence analysis and enzyme assays revealed that the DNA fragment contained the ackA gene, which codes for acetate kinase. A high gene dosage of ackA was needed to induce the production of alkaline phosphatase and phosphate-binding protein in this strain. Overexpression of ackA elevated the intracellular ATP concentration, an effect that might be related to activation of the phosphate regulon in the phoR phoM strain. Images PMID:2158965

  1. Glucose-6-phosphate isomerase.

    PubMed

    Achari, A; Marshall, S E; Muirhead, H; Palmieri, R H; Noltmann, E A

    1981-06-26

    Glucose-6-phosphate isomerase (EC 5.3.1.9) is a dimeric enzyme of molecular mass 132000 which catalyses the interconversion of D-glucose-6-phosphate and D-fructose-6-phosphate. The crystal structure of the enzyme from pig muscle has been determined at a nominal resolution of 2.6 A. The structure is of the alpha/beta type. Each subunit consists of two domains and the active site is in both the domain interface and the subunit interface (P.J. Shaw & H. Muirhead (1976), FEBS Lett. 65, 50-55). Each subunit contains 13 methionine residues so that cyanogen bromide cleavage will produce 14 fragments, most of which have been identified and at least partly purified. Sequence information is given for about one-third of the molecule from 5 cyanogen bromide fragments. One of the sequences includes a modified lysine residue. Modification of this residue leads to a parallel loss of enzymatic activity. A tentative fit of two of the peptides to the electron density map has been made. It seems possible that glucose-6-phosphate isomerase, triose phosphate isomerase and pyruvate kinase all contain a histidine and a glutamate residue at the active site. PMID:6115414

  2. Selective separation of phosphate and fluoride from semiconductor wastewater.

    PubMed

    Warmadewanthi, B; Liu, J C

    2009-01-01

    Hydrofluoric acid (HF) and phosphoric acid (H(3)PO(4)) are widely used in semiconductor industry for etching and rinsing purposes. Consequently, significant amount of wastewater containing phosphate and fluoride is generated. Selective separation of phosphate and fluoride from the semiconductor wastewater, containing 936 mg/L of fluoride, 118 mg/L of phosphate, 640 mg/L of sulfate, and 26.7 mg/L of ammonia, was studied. Chemical precipitation and flotation reactions were utilized in the two-stage treatment processes. The first-stage reaction involved the addition of magnesium chloride (MgCl(2)) to induce selective precipitation of magnesium phosphate. The optimal condition was pH 10 and molar ratio, [Mg(2 + )]/[(PO(4) (3-))], of 3:1, and 66.2% of phosphate was removed and recovered as bobierrite (Mg(3)(PO(4))(2).8H(2)O). No reaction was found between MgCl(2) and fluoride. Calcium chloride (CaCl(2)) was used in the second-stage reaction to induce precipitation of calcium fluoride and calcium phosphate. The optimum molar ratio, [Ca(2 + )]/[F(-)], was 0.7 at pH 10, and residual fluoride concentration of 10.7 mg/L and phosphate concentration of lower than 0.5 mg/L was obtained. Thermodynamic equilibrium was modeled with PHREEQC and compared with experimental results. Sodium dodecylsulfate (SDS) was an effective collector for subsequent solid-liquid removal via dispersed air flotation (DiAF). The study demonstrated that phosphate can be selectively recovered from the wastewater. Potential benefits include recovery of phosphate for reuse, lower required dosage of calcium for fluoride removal, and less amount of CaF(2) sludge. PMID:19474500

  3. MAGNESIUM MONO POTASSIUM PHOSPHATE GROUT FOR P-REACTOR VESSEL IN-SITU DECOMISSIONING

    SciTech Connect

    Langton, C.; Stefanko, D.

    2011-01-05

    The objective of this report is to document laboratory testing of magnesium mono potassium phosphate grouts for P-Reactor vessel in-situ decommissioning. Magnesium mono potassium phosphate cement-based grout was identified as candidate material for filling (physically stabilizing) the 105-P Reactor vessel (RV) because it is less alkaline than portland cement-based grout (pH of about 12.4). A less alkaline material ({<=} 10.5) was desired to address a potential materials compatibility issue caused by corrosion of aluminum metal in highly alkaline environments such as that encountered in portland cement grouts. Information concerning access points into the P-Reactor vessel and amount of aluminum metal in the vessel is provided elsewhere. Fresh and cured properties were measured for: (1) commercially blended magnesium mono potassium phosphate packaged grouts, (2) commercially available binders blended with inert fillers at SRNL, (3) grouts prepared from technical grade MgO and KH{sub 2}PO{sub 4} and inert fillers (quartz sands, Class F fly ash), and (4) Ceramicrete{reg_sign} magnesium mono potassium phosphate-based grouts prepared at Argonne National Laboratory. Boric acid was evaluated as a set retarder in the magnesium mono potassium phosphate mixes.

  4. Alkaline Waterflooding Demonstration Project, Ranger Zone, Long Beach Unit, Wilmington Field, California. Fourth annual report, June 1979-May 1980. Volume 3. Appendices II-XVII

    SciTech Connect

    Carmichael, J.D.

    1981-03-01

    Volume 3 contains Appendices II through XVII: mixing instructions for sodium orthosilicate; oil displacement studies using THUMS C-331 crude oil and extracted reservoir core material from well B-110; clay mineral analysis of B-827-A cores; sieve analysis of 4 Fo sand samples from B-110-IA and 4 Fo sand samples from B-827-A; core record; delayed secondary caustic consumption tests; long-term alkaline consumption in reservoir sands; demulsification study for THUMS Long Beach Company, Island White; operating plans and instructions for DOE injection demonstration project, alkaline injection; caustic pilot-produced water test graphs; well test irregularities (6/1/79-5/31/80); alkaline flood pump changes (6/1/79-5/31/80); monthly DOE pilot chemical waterflood injection reports (preflush injection, alkaline-salt injection, and alkaline injection without salt); and caustic safety procedures-alkaline chemicals.

  5. Fluoride stimulates ( sup 3 H)thymidine incorporation and alkaline phosphatase production by human osteoblasts

    SciTech Connect

    Khokher, M.A.; Dandona, P. )

    1990-11-01

    The effect of sodium fluoride on alkaline phosphatase (ALP) release and ({sup 3}H)thymidine uptake by human osteoblasts in culture was investigated. Sodium fluoride stimulated both ALP release and ({sup 3}H)thymidine uptake at concentrations of sodium fluoride greater than 250 mumol/L. This stimulation was similar in magnitude to that induced by 1,25-dihydroxycholecalciferol. The fluoride-induced increase in ALP was inhibited by verapamil, a calcium channel blocker. We conclude that sodium fluoride stimulates osteoblasts to proliferate and to release ALP. This stimulation by fluoride is dependent on calcium influx. Fluoride-induced stimulation of human osteoblasts may be relevant to its effect in enhancing bone formation in patients with osteoporosis.

  6. Phosphate Mines, Jordan

    NASA Technical Reports Server (NTRS)

    2008-01-01

    Jordan's leading industry and export commodities are phosphate and potash, ranked in the top three in the world. These are used to make fertilizer. The Jordan Phosphate Mines Company is the sole producer, having started operations in 1935. In addition to mining activities, the company produces phosphoric acid (for fertilizers, detergents, pharmaceuticals), diammonium phosphate (for fertilizer), sulphuric acid (many uses), and aluminum fluoride (a catalyst to make aluminum and magnesium).

    The image covers an area of 27.5 x 49.4 km, was acquired on September 17, 2005, and is located near 30.8 degrees north latitude, 36.1 degrees east longitude.

    The U.S. science team is located at NASA's Jet Propulsion Laboratory, Pasadena, Calif. The Terra mission is part of NASA's Science Mission Directorate.

  7. Diclofenac sodium overdose

    MedlinePlus

    Diclofenac sodium is a prescription medicine used to relieve pain and swelling. It is a nonsteroidal anti-inflammatory drug (NSAID). Diclofenac sodium overdose occurs when someone takes more than the ...

  8. Sodium Ferric Gluconate Injection

    MedlinePlus

    Sodium ferric gluconate injection is used to treat iron-deficiency anemia (a lower than normal number of ... are also receiving the medication epoetin (Epogen, Procrit). Sodium ferric gluconate injection is in a class of ...

  9. Docusate Sodium and Pregnancy

    MedlinePlus

    ... live chat Live Help Fact Sheets Share Docusate Sodium Friday, 01 April 2016 In every pregnancy, a ... This sheet talks about whether exposure to docusate sodium may increase the risk for birth defects over ...

  10. Sodium carbonate poisoning

    MedlinePlus

    Sodium carbonate (known as washing soda or soda ash) is a chemical found in many household and ... products. This article focuses on poisoning due to sodium carbonate. This article is for information only. Do ...

  11. Diclofenac sodium overdose

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/002630.htm Diclofenac sodium overdose To use the sharing features on this page, please enable JavaScript. Diclofenac sodium is a prescription medicine used to relieve pain ...

  12. Fractional excretion of sodium

    MedlinePlus

    FE sodium; FENa ... to a lab. There, they are examined for salt (sodium) and creatinine levels. Creatinine is a chemical waste ... your normal foods with a normal amount of salt, unless otherwise instructed by your health care provider. ...

  13. Sodium blood test

    MedlinePlus

    ... able to conserve water) Too much salt or sodium bicarbonate in the diet Use of certain medicines, including corticosteroids, laxatives, lithium, and medicines such as ibuprofen or naproxen Lower than normal sodium level is called hyponatremia. It may be due ...

  14. [Screening, identification and phosphate-solubilizing characteristics of Rahnella sp. phosphate-solubilizing bacteria in calcareous soil].

    PubMed

    Qiao, Zhi-wei; Hong, Jian-ping; Xie, Ying-he; Li, Lin-xuan

    2013-08-01

    Several strains of phosphate-solubilizing bacteria were isolated and screened from the crop rhizosphere of calcareous soil in Shanxi Province of China. After repeated isolation and purification, the strain W25 with strong phosphate-solubilizing activity was obtained, and identified as Rahnella sp., based on the morphological, physiological and biochemical properties and the analysis of 16S rRNA gene sequence. Further studies on the W25 showed that the maximum phosphate-solubilizing capability of the W25 on tricalium phosphate, aluminum phosphate and ferric phosphate reached 385.5, 110.4 and 216.6 mg x L(-1), respectively. In the liquid culture with aluminum phosphate and ferric phosphate, the solubilized phosphorous by the W25 was significantly negatively correlated with the liquid pH, with the correlation coefficient being 0.56 and 0.81, respectively. Among the carbon and nitrogen sources, glucose and ammonium nitrate were the optimum for the solubilization of tricalium phosphate by W25. The utilization of carbon source was in the order of glucose > lactose > sucrose > mannitose > starch, and that of nitrogen source was in the order of ammonium nitrate > ammonium chloride > ammonium sulfate > potassium nitrate > sodium nitrate. Different nitrogen sources had greater effects on the production of organic acids by W25. Formic acid and acetic acid would be produced when the nitrogen source was NH4+, oxalic acid and succinic acid would be produced when the nitrogen source was NO3(-), and citric acid would be extra produced when the ammonium nitrate was used as the nitrogen source. PMID:24380351

  15. Fundamentals of phosphate transfer.

    PubMed

    Kirby, Anthony J; Nome, Faruk

    2015-07-21

    Historically, the chemistry of phosphate transfer-a class of reactions fundamental to the chemistry of Life-has been discussed almost exclusively in terms of the nucleophile and the leaving group. Reactivity always depends significantly on both factors; but recent results for reactions of phosphate triesters have shown that it can also depend strongly on the nature of the nonleaving or "spectator" groups. The extreme stabilities of fully ionised mono- and dialkyl phosphate esters can be seen as extensions of the same effect, with one or two triester OR groups replaced by O(-). Our chosen lead reaction is hydrolysis-phosphate transfer to water: because water is the medium in which biological chemistry takes place; because the half-life of a system in water is an accepted basic index of stability; and because the typical mechanisms of hydrolysis, with solvent H2O providing specific molecules to act as nucleophiles and as general acids or bases, are models for reactions involving better nucleophiles and stronger general species catalysts. Not least those available in enzyme active sites. Alkyl monoester dianions compete with alkyl diester monoanions for the slowest estimated rates of spontaneous hydrolysis. High stability at physiological pH is a vital factor in the biological roles of organic phosphates, but a significant limitation for experimental investigations. Almost all kinetic measurements of phosphate transfer reactions involving mono- and diesters have been followed by UV-visible spectroscopy using activated systems, conveniently compounds with good leaving groups. (A "good leaving group" OR* is electron-withdrawing, and can be displaced to generate an anion R*O(-) in water near pH 7.) Reactivities at normal temperatures of P-O-alkyl derivatives-better models for typical biological substrates-have typically had to be estimated: by extended extrapolation from linear free energy relationships, or from rate measurements at high temperatures. Calculation is free

  16. Amorphous calcium phosphate and its application in dentistry

    PubMed Central

    2011-01-01

    Amorphous Calcium Phosphate (ACP) is an essential mineral phase formed in mineralized tissues and the first commercial product as artificial hydroxyapatite. ACP is unique among all forms of calcium phosphates in that it lacks long-range, periodic atomic scale order of crystalline calcium phosphates. The X-ray diffraction pattern is broad and diffuse with a maximum at 25 degree 2 theta, and no other different features compared with well-crystallized hydroxyapatite. Under electron microscopy, its morphological form is shown as small spheroidal particles in the scale of tenths nanometer. In aqueous media, ACP is easily transformed into crystalline phases such as octacalcium phosphate and apatite due to the growing of microcrystalline. It has been demonstrated that ACP has better osteoconductivity and biodegradability than tricalcium phosphate and hydroxyapatite in vivo. Moreover, it can increase alkaline phosphatase activities of mesoblasts, enhance cell proliferation and promote cell adhesion. The unique role of ACP during the formation of mineralized tissues makes it a promising candidate material for tissue repair and regeneration. ACP may also be a potential remineralizing agent in dental applications. Recently developed ACP-filled bioactive composites are believed to be effective anti-demineralizing/remineralizing agents for the preservation and repair of tooth structures. This review provides an overview of the development, structure, chemical composition, morphological characterization, phase transformation and biomedical application of ACP in dentistry. PMID:21740535

  17. Purification of a specific reversible tyrosine-O-phosphate phosphatase.

    PubMed Central

    Fukami, Y; Lipmann, F

    1982-01-01

    A phosphatase specific for tyrosine-O-phosphate (Tyr-P) was separated from several nonspecific phosphatases present in the third instar larvae of Drosophila melanogaster. The enzyme hydrolyzed L-Tyr-P, with an apparent Km of 0.14 mM, but not D-Tyr-P after being freed from hydrolytic activity toward p-nitrophenyl phosphate, the common phosphatase substrate. Such purified preparations also catalyzed a reversible phosphate transfer reaction from unlabeled Tyr-P to [3H]tyrosine. The transfer activity was L4-14% of the hydrolytic activity, depending on the initial concentration of tyrosine (0.25-4.0 mM). The two activities coincided throughout purification. However, they differed in pH optimum, that of hydrolysis being 6.5-7 and that of phosphate transfer being 7.7.5. The two activities were also differentially inhibited by 1-p-bromotetramisole oxalate in the presence of EDTA and by Mn2+. Addition of Mg2+ did not affect either hydrolysis or phosphate transfer, but 5 mM Zn2+ was 65% inhibitory to both. Sodium fluoride strongly inhibited both reactions, and this inhibition was reversed by EDTA, while EDTA itself had no effect. Pi had no effect and no detectable incorporation of 32Pi into Tyr-P was observed, indicating that the phosphate transfer reaction is not a simple reversal of hydrolysis. No ATP-linked phosphorylation of tyrosine was found. PMID:6181504

  18. Phosphate fertilizer impacts on glyphosate sorption by soil.

    PubMed

    Munira, Sirajum; Farenhorst, Annemieke; Flaten, Don; Grant, Cynthia

    2016-06-01

    This research examined the impact of field-aged phosphate and cadmium (Cd) concentrations, and fresh phosphate co-applications, on glyphosate sorption by soil. Soil samples were collected in 2013 from research plots that had received, from 2002 to 2009, annual applications of mono ammonium phosphate (MAP) at 20, 40 and 80 kg P ha(-1) and from products containing 0.4, 70 or 210 mg Cd kg(-1) as an impurity. A series of batch equilibrium experiments were carried out to quantify the glyphosate sorption distribution constant, Kd. Extractable Cd concentrations in soil had no significant effect on glyphosate sorption. Glyphosate Kd values significantly decreased with increasing Olsen-P concentrations in soil, regardless of the pH conditions studied. Experiments repeated with a commercially available glyphosate formulation showed statistically similar results as the experiments performed with analytical-grade glyphosate. Co-applications of MAP with glyphosate also reduced the available sorption sites to retain glyphosate, but less so when soils already contain large amounts of phosphate. Glyphosate Kd values in soils ranged from 173 to 939 L kg(-1) under very strong to strongly acidic condition but the Kd was always <100 L kg(-1) under moderately acidic to slightly alkaline conditions. The highest Olsen-P concentrations in soil reduced Kd values by 25-44% relative to control soils suggesting that, under moderately acidic to slightly alkaline conditions, glyphosate may become mobile by water in soils with high phosphate levels. Otherwise, glyphosate residues in agricultural soils are more likely to be transported off-site by wind and water-eroded sediments than by leaching or runoff. PMID:27035384

  19. Deposition and removal of sodium contamination on silicon wafers

    NASA Astrophysics Data System (ADS)

    Constant, I.; Tardif, F.; Derrien, J.

    2000-01-01

    In this paper investigations are performed in order to understand the source of sodium contamination in clean-room environments and to find different cleaning processes able to limit or suppress sodium deposition. In a clean-room environment, the human being has been identified as one of the major sources of sodium. The airborne sodium contamination is essentially transmitted in particle form. In order to limit sodium deposition from the air, the wafers awaiting subsequent processing need to be stored in a protective box or placed far from the human environment and should not be left for much more than 1 week in a class 1 clean room. Also, wet chemistries could cause sodium contamination on wafers particularly during the deionized water rinse. In order to limit the possible contamination, the sodium deposition mechanisms have been studied: they show the typical characteristics of Langmuir adsorption. Temperature and ionic concentration are both parameters which influence the deposition. In water, sodium deposition can be avoided by introducing acid or alkaline solutions or increasing the temperature: it can be drastically reduced by adding traces of HCl (0.01%). Finally, other cleaning chemistries such as SC1 (NH4 OH-H2 O2 -H2 O) in 0.25:1:5 proportion, SC2 (HCl-H2 O2 -H2 O) in 1:1:5 proportion, 0.1% HF and SPM (H2 SO4 -H2 O2 ) in 3:1 proportion reduce the contamination as well.

  20. Anode conductor for alkaline cells

    SciTech Connect

    Schrenk, D.J.; Murphy, P.E.

    1988-12-13

    This patent describes an electrochemical cell comprised of an anode comprised of zinc; a cathode; and alkaline electrolyte; and a current collector comprised of a silicon bronze alloy that is comprised of 85-98% by weight copper and 1-5% by weight silicon with the remainder being comprised of at least one of manganese, iron, zinc, aluminum, tin, lead, or mixtures thereof; and a strip of metal tab stock welded to the current collector, the tab stock being a metal other than silicon bronze alloy.

  1. Alkaline fuel cell performance investigation

    NASA Technical Reports Server (NTRS)

    Martin, R. E.; Manzo, M. A.

    1988-01-01

    An exploratory experimental fuel cell test program was conducted to investigate the performance characteristics of alkaline laboratory research electrodes. The objective of this work was to establish the effect of temperature, pressure, and concentration upon performance and evaluate candidate cathode configurations having the potential for improved performance. The performance characterization tests provided data to empirically establish the effect of temperature, pressure, and concentration upon performance for cell temperatures up to 300 F and reactant pressures up to 200 psia. Evaluation of five gold alloy cathode catalysts revealed that three doped gold alloys had more than two times the surface areas of reference cathodes and therefore offered the best potential for improved performance.

  2. Alkaline fuel cell performance investigation

    NASA Technical Reports Server (NTRS)

    Martin, R. E.; Manzo, M. A.

    1988-01-01

    An exploratory experimental fuel cell test program was conducted to investigate the performance characteristics of alkaline laboratory research electrodes. The objective of this work was to establish the effect of temperature, pressure, and concentration upon performance and evaluate candidate cathode configurations having the potential for improved performance. The performance characterization tests provided data to empirically establish the effect of temperature, pressure, and concentration upon performance for cell temperatures up to 300 F and reactant pressures up to 200 psia. Evaluation of five gold alloy cathode catalysts revealed that three doped gold alloys had more that two times the surface areas of reference cathodes and therefore offered the best potential for improved performance.

  3. Rechargeable sodium alloy anode

    SciTech Connect

    Jow, T.R.

    1988-06-28

    A secondary battery is described comprising: (a) an anode which comprises an alloy of sodium and one or metals selected from the group consisting of tin, lead antimony, bismuth, selenium and tellerium, (b) an electrolyte comprising one or more organic solvents and one or more sodium salts dissolved therein forming dissolved sodium cations in solution; and (c) a cathode; the sodium cations from the electrolyte alloying with the one or more metals of the alloy in the anode during the charging of the battery and sodium in the alloy disoloving in the electrolyte during the discharging of the battery.

  4. Sodium-dependent transport of neutral amino acids by whole cells and membrane vesicles of Streptococcus bovis, a ruminal bacterium.

    PubMed Central

    Russell, J B; Strobel, H J; Driessen, A J; Konings, W N

    1988-01-01

    Streptococcus bovis JB1 cells were able to transport serine, threonine, or alanine, but only when they were incubated in sodium buffers. If glucose-energized cells were washed in potassium phosphate and suspended in potassium phosphate buffer, there was no detectable uptake. Cells deenergized with 2-deoxyglucose and incubated in sodium phosphate buffer were still able to transport serine, and this result indicated that the chemical sodium gradient was capable of driving transport. However, when the deenergized cells were treated with valinomycin and diluted into sodium phosphate to create both an artificial membrane potential and a chemical sodium gradient, rates of serine uptake were fivefold greater than in cells having only a sodium gradient. If deenergized cells were preloaded with sodium (no membrane potential or sodium gradient), there was little serine transport. Nigericin and monensin, ionophores capable of reversing sodium gradients across membranes, strongly inhibited sodium-dependent uptake of the three amino acids. Membrane vesicles loaded with potassium and diluted into either lithium or choline chloride were unable to transport serine, but rapid uptake was evident if sodium chloride was added to the assay mixture. Serine transport had an extremely poor affinity for sodium, and more than 30 mM was needed for half-maximal rates of uptake. Serine transport was inhibited by an excess of threonine, but an excess of alanine had little effect. Results indicated that S. bovis had separate sodium symport systems for serine or threonine and alanine, and either the membrane potential or chemical sodium gradient could drive uptake. PMID:3136141

  5. Phosphate Solubilization Potentials of Rhizosphere Isolates from Central Anatolia (Turkey)

    NASA Astrophysics Data System (ADS)

    Ogut, M.; Er, F.

    2009-04-01

    Plant available-phosphorus (P) is usually low in Anatolian soils due mainly to the precipitation as calcium (Ca) and magnesium (Mg) phosphates in alkaline conditions. Phosphate solubilizing microorganisms (PSM) can enhance plant P-availability by dissolving the hardly soluble-P within the rhizosphere, which is the zone that surrounds the plant roots. PSM's can be used as seed- or soil-inocula to increase plant P-uptake and the overall growth. A total of 162 PSM's were isolated from the rhizosphere of wheat plants excavated from different fields located along a 75 km part of a highway in Turkey. The mean, the standart deviation, and the median for solubilized-P (ppm) in a 24 h culture in a tricalcium phosphate broth were 681, 427, and 400 for glucose; 358, 266, and 236 for sucrose; and 102, 117, and 50 for starch, respectively. There was not a linear relationship between the phosphate solubilized in the liquid cultures and the solubilization index obtained in the Pikovskaya's agar. Nine isolates representing both weak and strong solubilizers [Bacillus megaterium (5), Bacillus pumilis (1), Pseudomonas syringae pv. phaseolica (1), Pseudomonas fluorescens (1), Arthrobacter aurescens (1) as determined by the 16S rRNA gene sequence analysis] were further studied in a five day incubation. Pseudomonas syringae pv. phaseolica solubilized statistically (P<0.05) higher phosphate (409 ppm) than all the other strains did. There was not a statistically significant (P<0.05) difference in solubilized-P among the Bacillus strains. The pH of the medium fell to the levels between 4 and 5 from the initial neutrality. The phosphate solubilizing strains variably produced gluconic, 2-keto-D-gluconic, glycolic, acetic and butyric acids. The organic acids produced by these microorganisms seem to be the major source of phosphate solubilization in vitro.

  6. A Mg(2+)-dependent ecto-phosphatase activity on the external surface of Trypanosoma rangeli modulated by exogenous inorganic phosphate.

    PubMed

    Fonseca-de-Souza, André L; Dick, Claudia Fernanda; Dos Santos, André Luiz Araújo; Meyer-Fernandes, José Roberto

    2008-08-01

    In this work, we characterized a Mg(2+)-dependent ecto-phosphatase activity present in live Trypanosoma rangeli epimastigotes. This enzyme showed capacity to hydrolyze the artificial substrate for phosphatases, p-nitrophenylphosphate (p-NPP). At saturating concentration of p-NPP, half-maximal p-NPP hydrolysis was obtained with 0.23mM Mg(2+). Ca(2+) had no effect on the basal phosphatase activity, could not substitute Mg(2+) as an activator and in contrast inhibited the p-NPP hydrolysis stimulated by Mg(2+). The dependence on p-NPP concentration showed a normal Michaelis-Menten kinetics for this phosphatase activity with values of V(max) of 8.94+/-0.36 nmol p-NP x h(-1) x 10(-7) cells and apparent K(m) of 1.04+/-0.16 mM p-NPP. Mg(2+)-dependent ecto-phosphatase activity was stimulated by the alkaline pH range. Experiments using inhibitors, such as, sodium fluoride, sodium orthovanadate and ammonium molybdate, inhibited the Mg(2+)-dependent ecto-phosphatase activity. Inorganic phosphate (Pi), a product of phosphatases, inhibited reversibly in 50% this activity. Okadaic acid and microcystin-LR, specific phosphoserine/threonine phosphatase inhibitors, inhibited significantly the Mg(2+)-dependent ecto-phosphatase activity. In addition, this phosphatase activity was able to recognize as substrates only o-phosphoserine and o-phosphothreonine, while o-phosphotyrosine was not a good substrate for this phosphatase. Epimastigote forms of T. rangeli exhibit a typical growth curve, achieving the stationary phase around fifth or sixth day and the Mg(2+)-dependent ecto-phosphatase activity decreased around 10-fold with the cell growth progression. Cells maintained at Pi-deprived medium (2 mM Pi) present Mg(2+)-dependent ecto-phosphatase activity approximately threefold higher than that maintained at Pi-supplemented medium (50 mM Pi). PMID:18599005

  7. Alkaline detergent recycling via ultrafiltration

    SciTech Connect

    Steffani, C.; Meltzer, M.

    1995-06-01

    The metal finishing industry uses alkaline cleaners and detergents to remove oils and dirt from manufactured parts, often before they are painted or plated. The use of these cleaners has grown because environmental regulations are phasing out ozone depleting substances and placing restrictions on the use and disposal of many hazardous solvents. Lawrence Livermore National Laboratory is examining ultrafiltration as a cleaning approach that reclaims the cleaning solutions and minimizes wastes. The ultrafiltration membrane is made from sheets of polymerized organic film. The sheets are rolled onto a supporting frame and installed in a tube. Spent cleaning solution is pumped into a filter chamber and filtered through the membrane that captures oils and dirt and allows water and detergent to pass. The membrane is monitored and when pressure builds from oil and dirt, an automatic system cleans the surface to maintain solution flow and filtration quality. The results show that the ultrafiltration does not disturb the detergent concentration or alkalinity but removed almost all the oils and dirt leaving the solution in condition to be reused.

  8. Grace DAKASEP alkaline battery separator

    NASA Technical Reports Server (NTRS)

    Giovannoni, R. T.; Lundquist, J. T.; Choi, W. M.

    1987-01-01

    The Grace DAKASEP separator was originally developed as a wicking layer for nickel-zinc alkaline batteries. The DAKASEP is a filled non-woven separator which is flexible and heat sealable. Through modification of formulation and processing variables, products with a variety of properties can be produced. Variations of DAKASEP were tested in Ni-H2, Ni-Zn, Ni-Cd, and primary alkaline batteries with good results. The properties of DAKASEP which are optimized for Hg-Zn primary batteries are shown in tabular form. This separator has high tensile strength, 12 micron average pore size, relatively low porosity at 46-48 percent, and consequently moderately high resistivity. Versions were produced with greater than 70 percent porosity and resistivities in 33 wt percent KOH as low as 3 ohm cm. Performance data for Hg-Zn E-1 size cells containing DAKASEP with the properties shown in tabular form, are more reproducible than data obtained with a competitive polypropylene non-woven separator. In addition, utilization of active material is in general considerably improved.

  9. Impacts of Priming with Silicon on the Growth and Tolerance of Maize Plants to Alkaline Stress

    PubMed Central

    Abdel Latef, Arafat A.; Tran, Lam-Son P.

    2016-01-01

    Silicon (Si) has been known to augment plant defense against biotic and abiotic pressures. Maize (Zea maize L.) is classified as a Si accumulator and is relatively susceptible to alkaline stress. In this study, seeds of maize were grown in pots and exposed to various concentrations of Na2CO3 (0, 25, 50, and 75 mM) with or without 1.5 mM Si in the form of sodium metasilicate Na2O3Si.5H2O for 25 days. Alkaline-stressed plants showed a decrease in growth parameters, leaf relative water content (LRWC), and the contents of photosynthetic pigments, soluble sugars, total phenols and potassium ion (K+), as well as potassium/sodium ion (K+/Na+) ratio. By contrast, alkaline stress increased the contents of soluble proteins, total free amino acids, proline, Na+ and malondialdehyde (MDA), as well as the activities of superoxide dismutase (SOD), catalase (CAT), and peroxidase (POD) in stressed plants. On the other hand, application of Si by seed-priming improved growth of stressed plants, which was accompanied by the enhancement in LRWC, and levels of photosynthetic pigments, soluble sugars, soluble proteins, total free amino acids and K+, as well as activities of SOD, CAT, and POD enzymes. Furthermore, Si supplement resulted in a decrease in the contents of proline, MDA and Na+, which together with enhanced K+ level led to a favorable adjustment of K+/Na+ ratio, in stressed plants relative to plants treated with alkaline stress alone. Taken together, these results indicate that Si plays a pivotal role in alleviating the negative effects of alkaline stress on maize growth by improving water status, enhancing photosynthetic pigments, accumulating osmoprotectants rather than proline, activating the antioxidant machinery, and maintaining the balance of K+/Na+ ratio. Thus, our findings demonstrate that seed-priming with Si is an efficient strategy that can be used to boost tolerance of maize plants to alkaline stress. PMID:27014283

  10. Impacts of Priming with Silicon on the Growth and Tolerance of Maize Plants to Alkaline Stress.

    PubMed

    Abdel Latef, Arafat A; Tran, Lam-Son P

    2016-01-01

    Silicon (Si) has been known to augment plant defense against biotic and abiotic pressures. Maize (Zea maize L.) is classified as a Si accumulator and is relatively susceptible to alkaline stress. In this study, seeds of maize were grown in pots and exposed to various concentrations of Na2CO3 (0, 25, 50, and 75 mM) with or without 1.5 mM Si in the form of sodium metasilicate Na2O3Si.5H2O for 25 days. Alkaline-stressed plants showed a decrease in growth parameters, leaf relative water content (LRWC), and the contents of photosynthetic pigments, soluble sugars, total phenols and potassium ion (K(+)), as well as potassium/sodium ion (K(+)/Na(+)) ratio. By contrast, alkaline stress increased the contents of soluble proteins, total free amino acids, proline, Na(+) and malondialdehyde (MDA), as well as the activities of superoxide dismutase (SOD), catalase (CAT), and peroxidase (POD) in stressed plants. On the other hand, application of Si by seed-priming improved growth of stressed plants, which was accompanied by the enhancement in LRWC, and levels of photosynthetic pigments, soluble sugars, soluble proteins, total free amino acids and K(+), as well as activities of SOD, CAT, and POD enzymes. Furthermore, Si supplement resulted in a decrease in the contents of proline, MDA and Na(+), which together with enhanced K(+) level led to a favorable adjustment of K(+)/Na(+) ratio, in stressed plants relative to plants treated with alkaline stress alone. Taken together, these results indicate that Si plays a pivotal role in alleviating the negative effects of alkaline stress on maize growth by improving water status, enhancing photosynthetic pigments, accumulating osmoprotectants rather than proline, activating the antioxidant machinery, and maintaining the balance of K(+)/Na(+) ratio. Thus, our findings demonstrate that seed-priming with Si is an efficient strategy that can be used to boost tolerance of maize plants to alkaline stress. PMID:27014283

  11. Alkaline volcanic rocks from the Columbia Hills, Gusev crater, Mars

    USGS Publications Warehouse

    McSween, H.Y.; Ruff, S.W.; Morris, R.V.; Bell, J.F., III; Herkenhoff, K.; Gellert, Ralf; Stockstill, K.R.; Tornabene, L.L.; Squyres, S. W.; Crisp, J.A.; Christensen, P.R.; McCoy, T.J.; Mittlefehldt, D. W.; Schmidt, M.

    2006-01-01

    Irvine, Backstay, and Wishstone are the type specimens for three classes of fine-grained or fragmental, relatively unaltered rocks with distinctive thermal emission spectra, found as float on the flanks of the Columbia Hills. Chemical analyses indicate that these rocks are mildly alkaline basalt, trachybasalt, and tephrite, respectively. Their mineralogy consists of Na- and K-rich feldspar(s), low- and high-Ca pyroxenes, ferroan olivine, Fe-Ti (and possibly Cr) oxides, phosphate, and possibly glass. The texture of Wishstone is consistent with a pyroclastic origin, whereas Irvine and Backstay are lavas or possibly dike rocks. Chemical compositions of these rocks plot on or near liquid lines of descent for most elements calculated for Adirondack class rocks (olivine-rich basalts from the Gusev plains) at various pressures from 0.1 to 1.0 GPa. We infer that Wishstone-, Backstay-, and Irvine-class magmas may have formed by fractionation of primitive, oxidized basaltic magma similar to Adirondack-class rocks. The compositions of all these rocks reveal that the Gusev magmatic province is alkaline, distinct from the subalkaline volcanic rocks thought to dominate most of the planet's surface. The fact that differentiated volcanic rocks were not encountered on the plains prior to ascending Husband Hill may suggest a local magma source for volcanism beneath Gusev crater. Copyright 2006 by the American Geophysical Union.

  12. Brushite-based calcium phosphate cement with multichannel hydroxyapatite granule loading for improved bone regeneration.

    PubMed

    Sarkar, Swapan Kumar; Lee, Byung Yeol; Padalhin, Andrew Reyas; Sarker, Avik; Carpena, Nathaniel; Kim, Boram; Paul, Kallyanshish; Choi, Hwan Jun; Bae, Sang-Ho; Lee, Byong Taek

    2016-01-01

    In this work, we report brushite-based calcium phosphate cement (CPC) system to enhance the in vivo biodegradation and tissue in-growth by incorporation of micro-channeled hydroxyapatite (HAp) granule and silicon and sodium addition in calcium phosphate precursor powder. Sodium- and silicon-rich calcium phosphate powder with predominantly tri calcium phosphate (TCP) phase was synthesized by an inexpensive wet chemical route to react with mono calcium phosphate monohydrate (MCPM) for making the CPC. TCP nanopowder also served as a packing filler and moderator of the reaction kinetics of the setting mechanism. Strong sintered cylindrical HAp granules were prepared by fibrous monolithic (FM) process, which is 800 µm in diameter and have seven micro-channels. Acid sodium pyrophosphate and sodium citrate solution was used as the liquid component which acted as a homogenizer and setting time retarder. The granules accelerated the degradation of the brushite cement matrix as well as improved the bone tissue in-growth by permitting an easy access to the interior of the CPC through the micro-channels. The addition of micro-channeled granule in the CPC introduced porosity without sacrificing much of its compressive strength. In vivo investigation by creating a critical size defect in the femur head of a rabbit model for 1 and 2 months showed excellent bone in-growth through the micro-channels. The granules enhanced the implant degradation behavior and bone regeneration in the implanted area was significantly improved after two months of implantation. PMID:26333790

  13. 21 CFR 184.1434 - Magnesium phosphate.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Magnesium phosphate. 184.1434 Section 184.1434 Food... Specific Substances Affirmed as GRAS § 184.1434 Magnesium phosphate. (a) Magnesium phosphate includes both magnesium phosphate, dibasic, and magnesium phosphate, tribasic. Magnesium phosphate, dibasic...

  14. Modelling Cometary Sodium Tails

    NASA Astrophysics Data System (ADS)

    Birkett, K. S.; Jones, G. H.; Coates, A. J.

    2013-12-01

    Neutral sodium is readily observed in cometary spectra and can be seen to form its own distinct tail at high activity comets. Solar radiation pressure accelerates the sodium atoms antisunward and, as strong sodium absorption lines are present in the solar spectrum, the magnitude of this force is dependent upon the Doppler shift of the incident solar radiation. Therefore the heliocentric velocity of the sodium atom directly determines its acceleration. This can produce unique effects, such as a stagnation region. Sodium is relatively easy to detect and so can potentially be used to trace mechanisms in the coma that are otherwise difficult to observe. The source of neutral sodium in the tail currently remains unknown. We have therefore developed a new, three dimensional Monte-Carlo model of neutral cometary sodium in order to facilitate testing of different source production functions. It includes weightings due to neutral sodium lifetime, variation of cometary sodium emission due to Fraunhofer absorption lines and solar flux variation with heliocentric distance. The Swings and Greenstein effects, which can have particularly dramatic effects in near-Sun comets, are also considered comprehensively. Preliminary results from this model are presented, focusing on a comparison of predictions of the neutral sodium tail of Comet C/2012 S1 (ISON) with initial observations.

  15. Changes in potassium and sodium concentrations in stored blood.

    PubMed

    Opoku-Okrah, Clement; Acquah, Benjamin Kojo Safo; Dogbe, Elliot Eli

    2015-01-01

    Potassium is the principal intracellular cation with sodium being the principal extracellular cation. Maintenance of the distribution of potassium and sodium between the intracellular and the extracellular compartments relies on several homeostatic mechanisms. This study analysed the effect of blood storage on the concentrations of potassium and sodium in stored blood and also determine any variations that may exist in their concentrations. 50 mls of blood was sampled each from 28 units of evenly mixed donated blood in citrate phosphate dextrose adenine (CPDA-1) bags immediately after donation into satellite bag and stored at 4oC. Potassium and sodium concentration determinations were done on each of the 28 samples on day 0 (before blood was initially stored in the fridge), day 5, day 10, day 15 and day 20 of storage using the Roche 9180 ISE Electrolyte Analyser (Hoffmann-La Roche Ltd, Switzerland). data analysis showed significant changes in the potassium and sodium concentrations with a continuous rise in potassium and a continuous fall in sodium. A daily change of 0.59 mmol/l and 0.50 mmol/l was observed in the potassium and sodium concentrations respectively. We showed steady but increased daily concentrations of potassium and decrease concentrations of sodium in blood stored over time at 4oC. PMID:27386032

  16. Changes in potassium and sodium concentrations in stored blood

    PubMed Central

    Opoku-Okrah, Clement; Acquah, Benjamin Kojo Safo; Dogbe, Elliot Eli

    2015-01-01

    Potassium is the principal intracellular cation with sodium being the principal extracellular cation. Maintenance of the distribution of potassium and sodium between the intracellular and the extracellular compartments relies on several homeostatic mechanisms. This study analysed the effect of blood storage on the concentrations of potassium and sodium in stored blood and also determine any variations that may exist in their concentrations. 50mls of blood was sampled each from 28 units of evenly mixed donated blood in citrate phosphate dextrose adenine (CPDA-1) bags immediately after donation into satellite bag and stored at 4oC. Potassium and sodium concentration determinations were done on each of the 28 samples on day 0 (before blood was initially stored in the fridge), day 5, day 10, day 15 and day 20 of storage using the Roche 9180 ISE Electrolyte Analyser (Hoffmann-La Roche Ltd, Switzerland). data analysis showed significant changes in the potassium and sodium concentrations with a continuous rise in potassium and a continuous fall in sodium. A daily change of 0.59mmol/l and 0.50mmol/l was observed in the potassium and sodium concentrations respectively. We showed steady but increased daily concentrations of potassium and decrease concentrations of sodium in blood stored over time at 4oC.

  17. Alkaline phosphatase from venom of the endoparasitoid wasp, Pteromalus puparum.

    PubMed

    Zhu, Jia-Ying; Yin Ye, Gong; Fang, Qi; Hu, Cui

    2010-01-01

    Using chromogenic substrates 5-bromo-4-chloro-3'-indolyl phosphate and nitro blue tetrazolium, alkaline phosphatase (ALPase) was histochemically detected in the venom apparatus of an endoparasitoid wasp, Pteromalus puparum L. (Hymenoptera: Pteromalidae). Ultrastructural observations demonstrated its presence in the secretory vesicles and nuclei of the venom gland secretory cells. Using p-nitrophenyl phosphate as substrate to measure enzyme activity, the venom ALPase was found to be temperature dependent with bivalent cation effects. The full-length cDNA sequence of ALPase was amplified from the cDNA library of the venom apparatus of P. puparum, providing the first molecular characterization of ALPase in the venom of a parasitoid wasp. The cDNA consisted of 2645 bp with a 1623 bp open reading frame coding for 541 deduced amino acids with a predicted molecular mass of 59.83 kDa and pI of 6.98. Using multiple sequence alignment, the deduced amino acid sequence shared high identity to its counterparts from other insects. A signal peptide and a long conserved ALPase gene family signature sequence were observed. The amino acid sequence of this venom protein was characterized with different potential glycosylation, myristoylation, phosphorylation sites and metal ligand sites. The transcript of the ALPase gene was detected by RT-PCR in the venom apparatus with development related expression after adult wasp emergence, suggesting a possible correlation with the oviposition process. PMID:20575745

  18. Structural and biochemical characterization of a halophilic archaeal alkaline phosphatase.

    PubMed

    Wende, Andy; Johansson, Patrik; Vollrath, Ronnald; Dyall-Smith, Mike; Oesterhelt, Dieter; Grininger, Martin

    2010-07-01

    Phosphate is an essential component of all cells that must be taken up from the environment. Prokaryotes commonly secrete alkaline phosphatases (APs) to recruit phosphate from organic compounds by hydrolysis. In this study, the AP from Halobacterium salinarum, an archaeon that lives in a saturated salt environment, has been functionally and structurally characterized. The core fold and the active-site architecture of the H. salinarum enzyme are similar to other AP structures. These generally form dimers composed of dominant beta-sheet structures sandwiched by alpha-helices and have well-accessible active sites. The surface of the enzyme is predicted to be highly negatively charged, like other proteins of extreme halophiles. In addition to the conserved core, most APs contain a crown domain that strongly varies within species. In the H. salinarum AP, the crown domain is made of an acyl-carrier-protein-like fold. Different from other APs, it is not involved in dimer formation. We compare the archaeal AP with its bacterial and eukaryotic counterparts, and we focus on the role of crown domains in enhancing protein stability, regulating enzyme function, and guiding phosphoesters into the active-site funnel. PMID:20438737

  19. Phosphate excretion is decreased in older cardiac patients with normal kidney function: an emerging dietary risk factor?

    PubMed

    Jozefacki, Alexis; White, Christine A; Shobeiri, Navid S; Hopman, Wilma M; Johri, Amer M; Adams, Michael A; Holden, Rachel M

    2016-04-01

    Serum phosphate independently predicts cardiovascular events and mortality. Sixteen healthy adults and 9 adults with cardiovascular disease (CVD) ingested 500 mg of sodium phosphate after an over-night fast. In control subjects, the urine phosphate/creatinine ratio was significantly higher at 2 h (3.12 ± 1.02) than at baseline (1.98 ± 0.58, p < 0.001) but no change was observed in CVD patients. Decreased postprandial urinary excretion of phosphate could accelerate vascular calcification and may be an under-recognized risk factor for CVD. PMID:26944224

  20. Biomediated continuous release phosphate fertilizer

    DOEpatents

    Goldstein, A.H.; Rogers, R.D.

    1999-06-15

    A composition is disclosed for providing phosphate fertilizer to the root zone of plants. The composition comprises a microorganism capable of producing and secreting a solubilization agent, a carbon source for providing raw material for the microorganism to convert into the solubilization agent, and rock phosphate ore for providing a source of insoluble phosphate that is solubilized by the solubilization agent and released as soluble phosphate. The composition is provided in a physical form, such as a granule, that retains the microorganism, carbon source, and rock phosphate ore, but permits water and soluble phosphate to diffuse into the soil. A method of using the composition for providing phosphate fertilizer to plants is also disclosed. 13 figs.

  1. Biomediated continuous release phosphate fertilizer

    SciTech Connect

    Goldstein, Alan H.; Rogers, Robert D.

    1999-01-01

    A composition is disclosed for providing phosphate fertilizer to the root zone of plants. The composition comprises a microorganism capable of producing and secreting a solubilization agent, a carbon source for providing raw material for the microorganism to convert into the solubilization agent, and rock phosphate ore for providing a source of insoluble phosphate that is solubilized by the solubilization agent and released as soluble phosphate. The composition is provided in a physical form, such as a granule, that retains the microorganism, carbon source, and rock phosphate ore, but permits water and soluble phosphate to diffuse into the soil. A method of using the composition for providing phosphate fertilizer to plants is also disclosed.

  2. Thermal decomposition of bioactive sodium titanate surfaces

    NASA Astrophysics Data System (ADS)

    Ravelingien, Matthieu; Mullens, Steven; Luyten, Jan; Meynen, Vera; Vinck, Evi; Vervaet, Chris; Remon, Jean Paul

    2009-09-01

    Alkali-treated orthopaedic titanium surfaces have earlier shown to induce apatite deposition. A subsequent heat treatment under air improved the adhesion of the sodium titanate layer but decreased the rate of apatite deposition. Furthermore, insufficient attention was paid to the sensitivity of titanium substrates to oxidation and nitriding during heat treatment under air. Therefore, in the present study, alkali-treated titanium samples were heat-treated under air, argon flow or vacuum. The microstructure and composition of their surfaces were characterized to clarify what mechanism is responsible for inhibiting in vitro calcium phosphate deposition after heat treatment. All heat treatments under various atmospheres turned out to be detrimental for apatite deposition. They led to the thermal decomposition of the dense sodium titanate basis near the interface with the titanium substrate. Depending on the atmosphere, several forms of Ti yO z were formed and Na 2O was sublimated. Consequently, less exchangeable sodium ions remained available. This pointed to the importance of the ion exchange capacity of the sodium titanate layer for in vitro bioactivity.

  3. Surfactant and adhesive formulations from alkaline biomass extracts

    NASA Astrophysics Data System (ADS)

    Baxter, Matthew

    This work studies the ability to produce effective surfactant and adhesive formulations using surface active biological material extracted from different biomass sources using alkaline extraction methods. Two urban waste biomass sources were used to produce surfactants, Return Activated Sludge (RAS), and solid Urban Refuse (UR). The third biomass source investigated was isolated mustard protein (MP). RAS and MP extracts were investigated for adhesive production. The results indicate that extracts from the waste biomass sources, RAS and UR, can be combined with a commercial surfactant, sodium dioctyl sulfosuccinate (AOT), to produce surfactants with low interfacial tensions against various oils. These highly surface-active formulations were shown to be useful in the removal of bitumen from contaminated sand. RAS and MP showed potential as protein-based wood adhesives. These sources were used in adhesive formulations to produce a strong bond strength under low-pressure, ambient pressing conditions.

  4. Sodium remote from Io

    NASA Astrophysics Data System (ADS)

    Brown, R. A.; Schneider, N. M.

    1981-12-01

    Measurements of sodium emission lines originating in the middle Jupiter magnetosphere are measured, confirming the wide dispersal of neutral sodium in the Jovian system in at least two distinct manifestations. Candidate neutral transport processes in the context of the observed kinematical signatures are discussed. It is argued that the normal emission feature is produced by sodium atoms on bound elliptical orbits originating in the Io sodium cloud but with apojove in the field of view. Observations of the fast sodium feature indicate that atoms episodically acquire a broad range of line-of-sight velocities above the Jupiter gravitational escape speed and far above the speeds characteristic of surface-sputtered atoms. Three suggested reactions are distinguished according to (1) production rates based on estimated plasmaspheric properties, (2) kinematical signature, and (3) the timing of occurrences of the fast sodium feature.

  5. Dysregulation of phosphate metabolism and conditions associated with phosphate toxicity.

    PubMed

    Brown, Ronald B; Razzaque, Mohammed S

    2015-01-01

    Phosphate homeostasis is coordinated and regulated by complex cross-organ talk through delicate hormonal networks. Parathyroid hormone (PTH), secreted in response to low serum calcium, has an important role in maintaining phosphate homeostasis by influencing renal synthesis of 1,25-dihydroxyvitamin D, thereby increasing intestinal phosphate absorption. Moreover, PTH can increase phosphate efflux from bone and contribute to renal phosphate homeostasis through phosphaturic effects. In addition, PTH can induce skeletal synthesis of another potent phosphaturic hormone, fibroblast growth factor 23 (FGF23), which is able to inhibit renal tubular phosphate reabsorption, thereby increasing urinary phosphate excretion. FGF23 can also fine-tune vitamin D homeostasis by suppressing renal expression of 1-alpha hydroxylase (1α(OH)ase). This review briefly discusses how FGF23, by forming a bone-kidney axis, regulates phosphate homeostasis, and how its dysregulation can lead to phosphate toxicity that induces widespread tissue injury. We also provide evidence to explain how phosphate toxicity related to dietary phosphorus overload may facilitate incidence of noncommunicable diseases including kidney disease, cardiovascular disease, cancers and skeletal disorders. PMID:26131357

  6. Dysregulation of phosphate metabolism and conditions associated with phosphate toxicity

    PubMed Central

    Brown, Ronald B; Razzaque, Mohammed S

    2015-01-01

    Phosphate homeostasis is coordinated and regulated by complex cross-organ talk through delicate hormonal networks. Parathyroid hormone (PTH), secreted in response to low serum calcium, has an important role in maintaining phosphate homeostasis by influencing renal synthesis of 1,25-dihydroxyvitamin D, thereby increasing intestinal phosphate absorption. Moreover, PTH can increase phosphate efflux from bone and contribute to renal phosphate homeostasis through phosphaturic effects. In addition, PTH can induce skeletal synthesis of another potent phosphaturic hormone, fibroblast growth factor 23 (FGF23), which is able to inhibit renal tubular phosphate reabsorption, thereby increasing urinary phosphate excretion. FGF23 can also fine-tune vitamin D homeostasis by suppressing renal expression of 1-alpha hydroxylase (1α(OH)ase). This review briefly discusses how FGF23, by forming a bone–kidney axis, regulates phosphate homeostasis, and how its dysregulation can lead to phosphate toxicity that induces widespread tissue injury. We also provide evidence to explain how phosphate toxicity related to dietary phosphorus overload may facilitate incidence of noncommunicable diseases including kidney disease, cardiovascular disease, cancers and skeletal disorders. PMID:26131357

  7. Palladium nanoparticles synthesized by reducing species generated during a successive acidic/alkaline treatment of sucrose

    NASA Astrophysics Data System (ADS)

    Amornkitbamrung, Lunjakorn; Pienpinijtham, Prompong; Thammacharoen, Chuchaat; Ekgasit, Sanong

    2014-03-01

    Uniform spherical palladium nanoparticles with an average particle size of 4.3 ± 0.5 nm were successfully synthesized by reducing H2PdCl4 with intermediates in situ generated during a successive acidic/alkaline treatment of sucrose. A successive acidic/alkaline treatment plays an important role on converting the non-reducing sucrose into efficient reducing species containing aldehyde functionality. The Benedict's test corroborates the development and vanishing of the in situ generated reducing species upon prolonged degradation. An increase in alkalinity drastically improves the reduction efficiency. ATR FT-IR spectroscopy indicated spontaneous development of carboxylate after the alkaline treatment. Under the employed condition, small organic species with carbonyl groups (aldehyde, acid, and acid salt) were generated through the sucrose degradation before being oxidized to carbonate after an hour of the treatment. Sucrose was completely decomposed into carbonate after a 24-h successive acidic/alkaline treatment. The synthesized palladium nanoparticles express a good catalytic activity in the decolorization process of Congo red by sodium borohydride.

  8. Sodium Polystyrene Sulfonate

    MedlinePlus

    ... allergic to sodium polystyrene sulfonate, other polystyrene sulfonate resins, any other medications, or any of the ingredients ... salt substitutes containing potassium or foods that are high in potassium.

  9. a Study of Electronic Properties of Semiconducting Copper Tellurite and Copper Phosphate Glasses Containing Strontium

    NASA Astrophysics Data System (ADS)

    Arghamiri, M. S.

    Available from UMI in association with The British Library. In the present study a general introduction to the glassy state and the theory of amorphous semiconductors is given and relevant previous works are reviewed. A number of experiments were carried out on the physical properties such as density, molar volume, electrical conductivity, electron-spin-resonance and optical properties of two different series of glasses of the systems P_2O _5-CuO-SrO and TeO_2 -CuO-SrO. The density of glass samples and the molar volumes of the glasses were determined. It was found that the density increased as the alkaline-earth-metal content increased. The E.S.R. spectra of copper-phosphate and copper -tellurite glasses containing SrO have been examined and indicate that copper exists in glass in more than one valency state, the C ratio increases with increasing alkaline-earth content. From the IR absorption spectra of copper-phosphate glass samples, it is found that these spectra are similar to the IR absorption spectrum of crystalline P _2O_5 which suggests that the phosphate tetrahedra are dominating the structure of these glasses. As the addition of alkaline earth metal is increased in copper-tellurite glass samples, very small shifts in the absorption band are observed. Increase in E_{rm opt } to higher energies is observed in copper -strontium-phosphate glasses by the increase in alkaline -earth content. The values of E_{rm opt} also increase in copper-strontium-tellurite glasses as the SrO content increases. The d.c electrical conductivity values are increased as the CuO is replaced by SrO in copper-strontium-phosphate glasses, but a decrease is observed in copper-strontium -tellurite glasses as the content of SrO is increased.

  10. Understanding of alkaline pretreatment parameters for corn stover enzymatic saccharification

    PubMed Central

    2013-01-01

    Background Previous research on alkaline pretreatment has mainly focused on optimization of the process parameters to improve substrate digestibility. To achieve satisfactory sugar yield, extremely high chemical loading and enzyme dosages were typically used. Relatively little attention has been paid to reduction of chemical consumption and process waste management, which has proven to be an indispensable component of the bio-refineries. To indicate alkali strength, both alkali concentration in pretreatment solution (g alkali/g pretreatment liquor or g alkali/L pretreatment liquor) and alkali loading based on biomass solids (g alkali/g dry biomass) have been widely used. The dual approaches make it difficult to compare the chemical consumption in different process scenarios while evaluating the cost effectiveness of this pretreatment technology. The current work addresses these issues through pretreatment of corn stover at various combinations of pretreatment conditions. Enzymatic hydrolysis with different enzyme blends was subsequently performed to identify the effects of pretreatment parameters on substrate digestibility as well as process operational and capital costs. Results The results showed that sodium hydroxide loading is the most dominant variable for enzymatic digestibility. To reach 70% glucan conversion while avoiding extensive degradation of hemicellulose, approximately 0.08 g NaOH/g corn stover was required. It was also concluded that alkali loading based on total solids (g NaOH/g dry biomass) governs the pretreatment efficiency. Supplementing cellulase with accessory enzymes such as α-arabinofuranosidase and β-xylosidase significantly improved the conversion of the hemicellulose by 6–17%. Conclusions The current work presents the impact of alkaline pretreatment parameters on the enzymatic hydrolysis of corn stover as well as the process operational and capital investment costs. The high chemical consumption for alkaline pretreatment technology

  11. Evaluation of high solids alkaline pretreatment of rice straw.

    PubMed

    Cheng, Yu-Shen; Zheng, Yi; Yu, Chao Wei; Dooley, Todd M; Jenkins, Bryan M; VanderGheynst, Jean S

    2010-11-01

    Fresh-harvested, air-dried rice straw was pretreated at a water content of 5 g H(2)O/g straw using sodium hydroxide (NaOH) and compared to pretreatment at 10 g H(2)O/g straw by hydrated lime (Ca(OH)(2)). Full factorial experiments including parallel wash-only treatments were completed with both sources of alkali. The experiments were designed to measure the effects of alkaline loading and pretreatment time on delignification and sugar yield upon enzymatic hydrolysis. Reaction temperature was held constant at 95 degrees C for lime pretreatment and 55 degrees C for NaOH pretreatment. The range of delignification was 13.1% to 27.0% for lime pretreatments and was 8.6% to 23.1% for NaOH pretreatments. Both alkaline loading and reaction time had significant positive effects (p < 0.001) on delignification under the design conditions, but only alkaline loading had a significant positive effect on enzymatic hydrolysis. Treatment at higher temperature also improved delignification; delignification with water alone ranged from 9.9% to 14.5% for pretreatment at 95 degrees C, but there was little effect observed at 55 degrees C. Post-pretreatment washing of biomass was not necessary for subsequent enzymatic hydrolysis. Maximum glucose yields were 176.3 mg/g dried biomass (48.5% conversion efficiency of total glucose) in lime-pretreated and unwashed biomass and were 142.3 mg/g dried biomass (39.2% conversion efficiency of total glucose) in NaOH-pretreated and unwashed biomass. PMID:20440580

  12. Interfacial activity in alkaline flooding enhanced oil recovery

    SciTech Connect

    Chan, M.K.

    1981-01-01

    The ionization of long-chained organic acids in the crude oil to form soaps was shown to be primarily responsible for the lowering of oil-water interfacial tension at alkaline pH. These active acids can be concentrated by silica gel chromatography into a minor polar fraction. An equilibrium chemical model was proposed based on 2 competing reactions: the ionization of acids to form active anions, and the formation of undissociated soap between acid anions and sodium ions. It correlates the interfacial activity with the interfacial concentration of active acid anions which is expressed in terms of the concentrations of the chemical species in the system. The model successfully predicts the observed oil-alkaline solution interfacial phenomenon, including its dependence on pH, alkali and salt concentrations, type of acid present and type of soap formed. Flooding at different alkali concentrations to activate different acid species present in the crude was shown to give better recovery than flooding at a single high alkali concentration. Treating the crude oil with a dilute solution of mineral acids liberates additional free active acids and yields better interfacial activity during subsequent alkali contact.

  13. Study of the alkaline fading of phenolphthalein in microemulsions.

    PubMed

    Mao, Shiyan; Chen, Zhiyun; An, Xueqin; Shen, Weiguo

    2011-06-01

    The reactions of the alkaline fading of phenolphthalein (PN) have been studied in water/sodium bis(2-ethylhexyl)sulfosuccinate (AOT)/isooctane microemulsions by monitoring the absorbance changes of PN in the system with the time and the results compared with those found for the same reactions in aqueous solutions. It was found that the values of the equilibrium constants and the forward reaction rate constants in the microemulsions were significantly larger than that in aqueous solutions and decreased with increasing the molar ratio of water to AOT (ω), except for that with low ω. The temperature dependence of the reaction rate constant was analyzed to obtain the values of free energy, enthalpy, and entropy of activation, which suggests the existence of an isokinetic relationship and a common mechanism for the reactions occurring in the microemulsions with different ω. It was also observed that the competition between the reactions of the alkaline fading of PN and the hydrolyzation of AOT in water/AOT/isooctane microemulsions when the reaction time was sufficiently long. PMID:21574587

  14. REDUCTION OF PLUTONIUM TO Pu$sup +3$ BY SODIUM DITHIONITE IN POTASSIUM CARBONATE

    DOEpatents

    Miller, D.R.; Hoekstra, H.R.

    1958-12-16

    Plutonium values are reduced in an alkaline aqueous medlum to the trlvalent state by means of sodium dlthionite. Plutonlum values are also separated from normally assoclated contaminants by metathesizing a lanthanum fluoride carrier precipitate containing plutonium with a hydroxide solution, performing the metathesis in the presence of about 0.2 M sodium dithionite at a temperature of between 40 and 90 icient laborato C.

  15. Production of citric and oxalic acids and solubilization of calcium phosphate by Penicillium bilaii.

    PubMed Central

    Cunningham, J E; Kuiack, C

    1992-01-01

    An isolate of Penicillium bilaii previously reported to solubilize mineral phosphates and enhance plant uptake of phosphate was studied. Using agar media with calcium phosphate and the pH indicator alizarin red S, the influence of the medium composition on phosphate solubility and medium acidification was recorded. The major acidic metabolites produced by P. bilaii in a sucrose nitrate liquid medium were found to be oxalic acid and citric acid. Citric acid production was promoted under nitrogen-limited conditions, while oxalic acid production was promoted under carbon-limited conditions. Citric acid was produced in both growth and stationary phases, but oxalic acid production occurred only in stationary phase. When submerged cultures which normally produce acid were induced to sporulate, the culture medium shifted toward alkaline rather than acid reaction with growth. PMID:1622211

  16. Process for extracting technetium from alkaline solutions

    SciTech Connect

    Moyer, B.A.; Sachleben, R.A.; Bonnesen, P.V.

    1994-12-31

    This invention relates generally to a process for extracting technetium from nuclear wastes and more particularly to a process for extracting technetium from alkaline waste solutions containing technetium and high concentrations of alkali metal nitrates. A process for extracting technetium values from an aqueous alkaline solution containing at least one alkali metal hydroxide and at least one alkali metal nitrate comprises the steps of: contacting the aqueous alkaline solution with a solvent consisting of a crown ether in a diluent, the diluent being a water-immiscible organic liquid in which the crown ether is soluble, for a period of time sufficient to selectively extract the technetium values from the aqueous alkaline solution into the solvent; separating the solvent containing the technetium values from the aqueous alkaline solution; and stripping the technetium values from the solvent by contacting the solvent with water.

  17. Exposure to the Proton Scavenger Glycine under Alkaline Conditions Induces Escherichia coli Viability Loss

    PubMed Central

    Vanhauteghem, Donna; Janssens, Geert Paul Jules; Lauwaerts, Angelo; Sys, Stanislas; Boyen, Filip; Cox, Eric; Meyer, Evelyne

    2013-01-01

    Our previous work described a clear loss of Escherichia coli (E. coli) membrane integrity after incubation with glycine or its N-methylated derivatives N-methylglycine (sarcosine) and N,N-dimethylglycine (DMG), but not N,N,N-trimethylglycine (betaine), under alkaline stress conditions. The current study offers a thorough viability analysis, based on a combination of real-time physiological techniques, of E. coli exposed to glycine and its N-methylated derivatives at alkaline pH. Flow cytometry was applied to assess various physiological parameters such as membrane permeability, esterase activity, respiratory activity and membrane potential. ATP and inorganic phosphate concentrations were also determined. Membrane damage was confirmed through the measurement of nucleic acid leakage. Results further showed no loss of esterase or respiratory activity, while an instant and significant decrease in the ATP concentration occurred upon exposure to either glycine, sarcosine or DMG, but not betaine. There was a clear membrane hyperpolarization as well as a significant increase in cellular inorganic phosphate concentration. Based on these results, we suggest that the inability to sustain an adequate level of ATP combined with a decrease in membrane functionality leads to the loss of bacterial viability when exposed to the proton scavengers glycine, sarcosine and DMG at alkaline pH. PMID:23544135

  18. Exposure to the proton scavenger glycine under alkaline conditions induces Escherichia coli viability loss.

    PubMed

    Vanhauteghem, Donna; Janssens, Geert Paul Jules; Lauwaerts, Angelo; Sys, Stanislas; Boyen, Filip; Cox, Eric; Meyer, Evelyne

    2013-01-01

    Our previous work described a clear loss of Escherichia coli (E. coli) membrane integrity after incubation with glycine or its N-methylated derivatives N-methylglycine (sarcosine) and N,N-dimethylglycine (DMG), but not N,N,N-trimethylglycine (betaine), under alkaline stress conditions. The current study offers a thorough viability analysis, based on a combination of real-time physiological techniques, of E. coli exposed to glycine and its N-methylated derivatives at alkaline pH. Flow cytometry was applied to assess various physiological parameters such as membrane permeability, esterase activity, respiratory activity and membrane potential. ATP and inorganic phosphate concentrations were also determined. Membrane damage was confirmed through the measurement of nucleic acid leakage. Results further showed no loss of esterase or respiratory activity, while an instant and significant decrease in the ATP concentration occurred upon exposure to either glycine, sarcosine or DMG, but not betaine. There was a clear membrane hyperpolarization as well as a significant increase in cellular inorganic phosphate concentration. Based on these results, we suggest that the inability to sustain an adequate level of ATP combined with a decrease in membrane functionality leads to the loss of bacterial viability when exposed to the proton scavengers glycine, sarcosine and DMG at alkaline pH. PMID:23544135

  19. Alkaline-resistance model of subtilisin ALP I, a novel alkaline subtilisin.

    PubMed

    Maeda, H; Mizutani, O; Yamagata, Y; Ichishima, E; Nakajima, T

    2001-05-01

    The alkaline-resistance mechanism of the alkaline-stable enzymes is not yet known. To clarify the mechanism of alkaline-resistance of alkaline subtilisin, structural changes of two typical subtilisins, subtilisin ALP I (ALP I) and subtilisin Sendai (Sendai), were studied by means of physicochemical methods. Subtilisin NAT (NAT), which exhibits no alkaline resistance, was examined as a control. ALP I gradually lost its activity, accompanied by protein degradation, but, on the contrary, Sendai was stable under alkaline conditions. CD spectral measurements at neutral and alkaline pH indicated no apparent differences between ALP I and Sendai. A significant difference was observed on measurement of fluorescence emission spectra of the tryptophan residues of ALP I that were exposed on the enzyme surface. The fluorescence intensity of ALP I was greatly reduced under alkaline conditions; moreover, the reduction was reversed when alkaline-treated ALP I was neutralized. The fluorescence spectrum of Sendai remained unchanged. The enzymatic and optical activities of NAT were lost at high pH, indicating a lack of functional and structural stability in an alkaline environment. Judging from these results, the alkaline resistance is closely related to the surface structure of the enzyme molecule. PMID:11328588

  20. BMP-2 promotes phosphate uptake, phenotypic modulation, and calcification of human vascular smooth muscle cells.

    PubMed

    Li, Xianwu; Yang, Hsueh-Ying; Giachelli, Cecilia M

    2008-08-01

    Vascular calcification is associated with increased risk of cardiovascular events that are the most common cause of death in patients with end-stage renal disease. Clinical and experimental studies indicate that hyperphosphatemia is a risk factor for vascular calcification and cardiovascular mortality in these patients. Our previous studies demonstrated that phosphate transport through the type III sodium-dependent phosphate cotransporter, Pit-1, was necessary for phosphate-induced calcification and osteochondrogenic phenotypic change in cultured human smooth muscle cells (SMC). BMP-2 is a potent osteogenic protein required for osteoblast differentiation and bone formation that has been implicated in vascular calcification. In the present study, we have examined the effects of BMP-2 on human SMC calcification in vitro. We found that treatment of SMC with BMP-2 enhanced elevated phosphate-induced calcification, but did not induce calcification under normal phosphate conditions. mRNAs for BMP receptors, including ALK2, ALK3, ALK6, BMPR-II, ActR-IIA and ActR-IIB were all detected in human SMCs. Mechanistically, BMP-2 dose-dependently stimulated phosphate uptake in SMC (200 ng/ml BMP-2 vs. vehicle: 13.94 vs. 7.09 nmol/30 min/mg protein, respectively). Real-time PCR and Western blot revealed the upregulation of Pit-1 mRNA and protein levels, respectively, by BMP-2. More importantly, inhibition of phosphate uptake by a competitive inhibitor of sodium-dependent phosphate cotransport, phosphonoformic acid, abrogated BMP-2-induced calcification. These results indicate that phosphate transport via Pit-1 is crucial in BMP-2-regulated SMC calcification. In addition, BMP-2-induced Runx2 and inhibited SM22 expression, indicating that it promotes osteogenic phenotype transition in these cells. Thus, BMP-2 may promote vascular calcification via increased phosphate uptake and induction of osteogenic phenotype modulation in SMC. PMID:18179800

  1. Preparation, mechanical property and cytocompatibility of freeze-cast porous calcium phosphate ceramics reinforced by phosphate-based glass.

    PubMed

    Yang, Yanqiu; He, Fupo; Ye, Jiandong

    2016-12-01

    In this study, phosphate-based glass (PG) was used as a sintering aid for freeze-cast porous biphasic calcium phosphate (BCP) ceramic, which was sintered under a lower temperature (1000°C). The phase composition, pore structure, compressive strength, and cytocompatibility of calcium phosphate composite ceramics (PG-BCP) were evaluated. The results indicated that PG additive reacted with calcium phosphate during the sintering process, forming β-Ca2P2O7; the ions of sodium and magnesium from PG partially substituted the calcium sites of β-calcium phosphate in BCP. The PG-BCP showed good cytocompatibility. The pore width of the porous PG-BCP ceramics was around 50μm, regardless of the amount of PG sintering aid. As the content of PG increased from 0wt.% to 15wt.%, the compressive strength of PG-BCP increased from 0.02 MP to 0.28MPa. When the PG additive was 17.5wt.%, the compressive strength of PG-BCP dramatically increased to 5.66MPa. Addition of 15wt.% PG was the critical point for the properties of PG-BCP. PG is considered as an effective sintering aid for freeze-cast porous bioceramics. PMID:27612796

  2. Phosphate Ions Affect the Water Structure at Functionalized Membrane Surfaces.

    PubMed

    Barrett, Aliyah; Imbrogno, Joseph; Belfort, Georges; Petersen, Poul B

    2016-09-01

    Antifouling surfaces improve function, efficiency, and safety in products such as water filtration membranes, marine vehicle coatings, and medical implants by resisting protein and biofilm adhesion. Understanding the role of water structure at these materials in preventing protein adhesion and biofilm formation is critical to designing more effective coatings. Such fouling experiments are typically performed under biological conditions using isotonic aqueous buffers. Previous studies have explored the structure of pure water at a few different antifouling surfaces, but the effect of electrolytes and ionic strength (I) on the water structure at antifouling surfaces is not well studied. Here sum frequency generation (SFG) spectroscopy is used to characterize the interfacial water structure at poly(ether sulfone) (PES) and two surface-modified PES films in contact with 0.01 M phosphate buffer with high and low salt (Ionic strength, I= 0.166 and 0.025 M, respectively). Unmodified PES, commonly used as a filtration membrane, and modified PES with a hydrophobic alkane (C18) and with a poly(ethylene glycol) (PEG) were used. In the low ionic strength phosphate buffer, water was strongly ordered near the surface of the PEG-modified PES film due to exclusion of phosphate ions and the creation of a surface potential resulting from charge separation between phosphate anions and sodium cations. However, in the high ionic strength phosphate buffer, the sodium and potassium chloride (138 and 3 mM, respectively) in the phosphate buffered saline screened this charge and substantially reduced water ordering. A much smaller water ordering and subsequent reduction upon salt addition was observed for the C18-modified PES, and little water structure change was seen for the unmodified PES. The large difference in water structuring with increasing ionic strength between widely used phosphate buffer and phosphate buffered saline at the PEG interface demonstrates the importance of studying

  3. Thermophysical properties of sodium

    NASA Technical Reports Server (NTRS)

    Golden, G. H.; Tokar, J. V.

    1969-01-01

    Assessment is given of physical and thermodynamic properties of sodium. FORTRAN subroutine computes enthalphy and entropy of sodium in given state, and composition, molecular weight, volume, and compressibility factor of corresponding vapor. Tabular results for saturated liquid and vapor are presented for a 500-2500 degree F range.

  4. Calcium Alginate-Neusilin US2 Nanocomposite Microbeads for Oral Sustained Drug Delivery of Poor Water Soluble Drug Aceclofenac Sodium

    PubMed Central

    Mallappa, Manjanna Kolammanahalli; Kesarla, Rajesh; Banakar, Shivakumar

    2015-01-01

    The aim of the present study was to formulate and investigate the calcium alginate- (CA-) Neusilin US2 nanocomposite microbeads containing preconcentrate of aceclofenac sodium (ACF-Na) liquid microemulsion (L-ME) for enhancement of oral bioavailability. The preconcentrate L-ME is prepared by using Labrafac PG, Labrasol, and Span 80 as oil, surfactant, and cosurfactant, respectively. The solid CA nanocomposite microbeads of L-ME prepared by microemulsification internal gelation technique using sodium alginate (SA) gelling agent, Neusilin US2 as adsorbent, and calcium chloride as crosslinking agent. L-ME has good thermodynamic stability; globule size was found to be 32.4 nm with polydispersity index 0.219 and −6.32 mV zeta potential. No significant interactions of excipients, drug in the formulations observed by FT-IR, DSC and XPRD. The concentration of SA and Neusilin US2 influences the flow properties, mean particle size, mechanical strength, drug entrapment efficiency, and percentage of drug release. All the formulations show minimum drug release in simulated gastric fluid (SGF) pH 1.2 for initial 2 h, maximum drug release in pH 6.8 phosphate buffer solution (PBS) at 6 h, followed by sustaining in simulated intestinal fluid (SIF) of pH 7.4 up to 12 h. The interaction of SA with Neusilin US2 creates a thick thixotropic gel network structure which acts as barrier to control the release of drug in the alkaline pH environment. Neusilin US2 is a novel filler used to convert L-ME into solid nanocomposite microbeads to enhance dissolution rate of poor water soluble drugs sustaining the drug release for prolonged period of time. PMID:25802761

  5. Decode the Sodium Label Lingo

    MedlinePlus

    ... For Preschooler For Gradeschooler For Teen Decode the Sodium Label Lingo Published January 24, 2013 Print Email Reading food labels can help you slash sodium. Here's how to decipher them. "Sodium free" or " ...

  6. Alkaline sorbent injection for mercury control

    DOEpatents

    Madden, Deborah A.; Holmes, Michael J.

    2002-01-01

    A mercury removal system for removing mercury from combustion flue gases is provided in which alkaline sorbents at generally extremely low stoichiometric molar ratios of alkaline earth or an alkali metal to sulfur of less than 1.0 are injected into a power plant system at one or more locations to remove at least between about 40% and 60% of the mercury content from combustion flue gases. Small amounts of alkaline sorbents are injected into the flue gas stream at a relatively low rate. A particulate filter is used to remove mercury-containing particles downstream of each injection point used in the power plant system.

  7. Alkaline sorbent injection for mercury control

    DOEpatents

    Madden, Deborah A.; Holmes, Michael J.

    2003-01-01

    A mercury removal system for removing mercury from combustion flue gases is provided in which alkaline sorbents at generally extremely low stoichiometric molar ratios of alkaline earth or an alkali metal to sulfur of less than 1.0 are injected into a power plant system at one or more locations to remove at least between about 40% and 60% of the mercury content from combustion flue gases. Small amounts of alkaline sorbents are injected into the flue gas stream at a relatively low rate. A particulate filter is used to remove mercury-containing particles downstream of each injection point used in the power plant system.

  8. Inorganic-organic separators for alkaline batteries

    NASA Technical Reports Server (NTRS)

    Sheibley, D. W. (Inventor)

    1978-01-01

    A flexible separator is reported for use between the electrodes of Ni-Cd and Ni-Zn batteries using alkaline electrolytes. The separator was made by coating a porous substrate with a battery separator composition. The coating material included a rubber-based resin copolymer, a plasticizer and inorganic and organic fillers which comprised 55% by volume or less of the coating as finally dried. One or more of the filler materials, whether organic or inorganic, is preferably active with the alkaline electrolyte to produce pores in the separator coating. The plasticizer was an organic material which is hydrolyzed by the alkaline electrolyte to improve conductivity of the separator coating.

  9. Process for extracting technetium from alkaline solutions

    DOEpatents

    Moyer, Bruce A.; Sachleben, Richard A.; Bonnesen, Peter V.

    1995-01-01

    A process for extracting technetium values from an aqueous alkaline solution containing at least one alkali metal hydroxide and at least one alkali metal nitrate, the at least one alkali metal nitrate having a concentration of from about 0.1 to 6 molar. The solution is contacted with a solvent consisting of a crown ether in a diluent for a period of time sufficient to selectively extract the technetium values from the aqueous alkaline solution. The solvent containing the technetium values is separated from the aqueous alkaline solution and the technetium values are stripped from the solvent.

  10. pH-dependent phosphatization of ZnO nanoparticles and its influence on subsequent lead sorption.

    PubMed

    Xu, Huacheng; Li, Lina; Lv, Hua; Liu, Xin; Jiang, Helong

    2016-01-01

    Phosphatization of ZnO nanoparticles (ZNPs) at various pHs and its influence on subsequent lead sorption were investigated. Results showed that, in presence of phosphate, both the chemical speciation and crystalline phase of ZNPs were pH dependent that most of them were converted to crystalline Zn3(PO4)2 at acidic pHs, but only little amorphous hopeites can be formed under alkaline condition. Phosphatization process significantly enhanced subsequent lead sorption with the order of acidic process > alkaline > pristine ZNPs. Spectroscopic analysis including ATR-FTIR and XPS revealed main mechanisms of lead phosphate precipitation and inner-sphere complexes for lead sorption on acidic and alkaline treatment products, respectively. The potential toxicity of ZNPs and heavy metals in eutrophic aquatic ecosystems would thus be reduced due to the ubiquitous phosphatization process. This study highlights the importance of environmental variables in exploring the environmental behavior and fate of heavy metals as well as nanoparticles in natural waters. PMID:26561448

  11. 75 FR 30375 - Certain Potassium Phosphate Salts From the People's Republic of China: Final Affirmative...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-01

    ... Determination with Final Antidumping Duty Determination, 75 FR 10466 (March 8, 2010) (Preliminary Determination... Circumstances in the Countervailing Duty Investigation, 75 FR 24575, 24577 (May 5, 2010). On April 27, 2010, we...-TA-1173 (Preliminary), Certain Sodium and Potassium Phosphate Salts from China, 74 FR 61173...

  12. METHOD FOR REMOVING SODIUM OXIDE FROM LIQUID SODIUM

    DOEpatents

    Bruggeman, W.H.; Voorhees, B.G.

    1957-12-01

    A method is described for removing sodium oxide from a fluent stream of liquid sodium by coldtrapping the sodium oxide. Apparatus utilizing this method is disclosed in United States Patent No. 2,745,552. Sodium will remain in a molten state at temperatures below that at which sodium oxide will crystallize out and form solid deposits, therefore, the contaminated stream of sodium is cooled to a temperature at which the solubility of sodium oxide in sodium is substantially decreased. Thereafter the stream of sodium is passed through a bed of stainless steel wool maintained at a temperature below that of the stream. The stream is kept in contact with the wool until the sodium oxide is removed by crystal growth on the wool, then the stream is reheated and returned to the system. This method is useful in purifying reactor coolants where the sodium oxide would otherwise deposit out on the walls and eventually plug the coolant tubes.

  13. Solvent kinetic isotope effects of human placental alkaline phosphatase in reverse micelles.

    PubMed Central

    Huang, T M; Hung, H C; Chang, T C; Chang, G G

    1998-01-01

    Human placental alkaline phosphatase was embedded in a reverse micellar system prepared by dissolving the surfactant sodium bis(2-ethylhexyl) sulphosuccinate (Aerosol-OT) in 2,2, 4-trimethylpentane. This microemulsion system provides a convenient instrumental tool to study the possible kinetic properties of the membranous enzyme in an immobilized form. The pL (pH/p2H) dependence of hydrolysis of 4-nitrophenyl phosphate has been examined over a pL range of 8.5-12.5 in both aqueous and reverse micellar systems. Profiles of log V versus pL were Ha-bell shaped in the acidic region but reached a plateau in the basic region in which two pKa values of 9.01-9.71 and 9.86-10.48, respectively, were observed in reverse micelles. However, only one pKa value of 9.78-10.27 in aqueous solution was detected. Profiles of log V/K versus pL were bell-shaped in the acidic region. However, they were wave-shaped in the basic region in which a residue of pKa 9.10-9.44 in aqueous solution and 8.07-8.78 in reverse micelles must be dehydronated for the reaction to reach an optimum. The V/K value shifted to a lower value upon dehydronation of a pKa value of 9.80-10.62 in aqueous solution and 11.23-12.17 in reverse micelles. Solvent kinetic isotope effects were measured at three pL values. At pL 9.5, the observed isotope effect was a product of equilibrium isotope effect and a kinetic isotope effect; at pL 10.4, the log V/K value was identical in water and deuterium. The deuterium kinetic isotope effect on V/K was 1.14 in an aqueous solution and 1.16 in reverse micelles. At pL 11.0 at which the log V values reached a plateau in either solvent system, the deuterium kinetic isotope effect on V was 2.08 in an aqueous solution and 0.62 in reverse micelles. Results from a proton inventory experiment suggested that a hydron transfer step is involved in the transition state of the catalytic reaction. The isotopic fractionation factor (pi) for deuterium for the transition state (piT) increased when

  14. Sodium hypochlorite as a developer for heavy ion tracks in polyimide

    NASA Astrophysics Data System (ADS)

    Klintberg, Lena; Lindeberg, Mikael; Thornell, Greger

    2001-12-01

    The developing and etching of heavy ion tracks in polyimide with sodium hypochlorite have been studied to gain control over the parameters that affect the etch result. The shape of the resulting pores is a function of both alkalinity and hypochlorite content of the solution. Sodium hypochlorite decomposes during etching, and the rate constant has been determined as a function of the alkalinity at 62 °C. Polished cross-sections have been examined to determine the pore shape, and this method has shown to be a straightforward way to characterise the pores. Decreasing the alkalinity gives more cylindrical pores, but increases the decomposition rate of the hypochlorite solution and decreases the etch rate.

  15. Composite seal reduces alkaline battery leakage

    NASA Technical Reports Server (NTRS)

    Clatterbuck, C. H.; Plitt, K. F.

    1965-01-01

    Composite seal consisting of rubber or plastic washers and a metal washer reduces alkaline battery leakage. Adhesive is applied to each washer interface, and the washers are held together mechanically.

  16. Submersible sodium pump

    DOEpatents

    Brynsvold, Glen V.; Lopez, John T.; Olich, Eugene E.; West, Calvin W.

    1989-01-01

    An electromagnetic submerged pump has an outer cylindrical stator with an inner cylindrical conductive core for the submerged pumping of sodium in the cylindrical interstitial volume defined between the stator and core. The cylindrical interstitial volume is typically vertically oriented, and defines an inlet at the bottom and an outlet at the top. The outer stator generates upwardly conveyed toroidal magnetic fields, which fields convey preferably from the bottom of the pump to the top of the pump liquid sodium in the cold leg of a sodium cooled nuclear reactor. The outer cylindrical stator has a vertically disposed duct surrounded by alternately stacked layers of coil units and laminates.

  17. SODIUM DEUTERIUM REACTOR

    DOEpatents

    Oppenheimer, E.D.; Weisberg, R.A.

    1963-02-26

    This patent relates to a barrier system for a sodium heavy water reactor capable of insuring absolute separation of the metal and water. Relatively cold D/sub 2/O moderator and reflector is contained in a calandria into which is immersed the fuel containing tubes. The fuel elements are cooled by the sodium which flows within the tubes and surrounds the fuel elements. The fuel containing tubes are surrounded by concentric barrier tubes forming annular spaces through which pass inert gases at substantially atmospheric pressure. Header rooms above and below the calandria are provided for supplying and withdrawing the sodium and inert gases in the calandria region. (AEC)

  18. Submersible sodium pump

    DOEpatents

    Brynsvold, G.V.; Lopez, J.T.; Olich, E.E.; West, C.W.

    1989-11-21

    An electromagnetic submerged pump has an outer cylindrical stator with an inner cylindrical conductive core for the submerged pumping of sodium in the cylindrical interstitial volume defined between the stator and core. The cylindrical interstitial volume is typically vertically oriented, and defines an inlet at the bottom and an outlet at the top. The outer stator generates upwardly conveyed toroidal magnetic fields, which fields convey preferably from the bottom of the pump to the top of the pump liquid sodium in the cold leg of a sodium cooled nuclear reactor. The outer cylindrical stator has a vertically disposed duct surrounded by alternately stacked layers of coil units and laminates. 14 figs.

  19. Biogenesis and Early Life on Earth and Europa: Favored by an Alkaline Ocean?

    NASA Astrophysics Data System (ADS)

    Kempe, Stephan; Kazmierczak, Jozef

    2002-03-01

    Recent discoveries about Europa - the probable existence of a sizeable ocean below its ice crust; the detection of hydrated sodium carbonates, among other salts; and the calculation of a net loss of sodium from the subsurface - suggest the existence of an alkaline ocean. Alkaline oceans (nicknamed "soda oceans" in analogy to terrestrial soda lakes) have been hypothesized also for early Earth and Mars on the basis of mass balance considerations involving total amounts of acids available for weathering and the composition of the early crust. Such an environment could be favorable to biogenesis since it may have provided for very low Ca2+ concentrations mandatory for the biochemical function of proteins. A rapid loss of CO2 from Europa's atmosphere may have led to freezing oceans. Alkaline brine bubbles embedded in ice in freezing and impact-thawing oceans could have provided a suitable environment for protocell formation and the large number of trials needed for biogenesis. Understanding these processes could be central to assessing the probability of life on Europa.

  20. Corrosion and anodic behaviour of zinc and its ternary alloys in alkaline battery electrolytes

    NASA Astrophysics Data System (ADS)

    Suresh Kannan, A. R.; Muralidharan, S.; Sarangapani, K. B.; Balaramachandran, V.; Kapali, V.

    Several attempts are being made to avoid the use of mercury-bearing zinc/zinc alloys as anodes in alkaline power sources. The work presented here suggests the possible use of some ternary alloys based on zinc of purity 99.9 to 99.95 wt.% as anodes in 10 M NaOH solution with sodium citrate, sodium stannate and calcium oxide as complexing agents and inhibitors. The corrosion of zinc and its alloys in 10 M NaOH solution is under cathodic control; in other alkaline electrolytes, it is under anodic control. Anode efficiency of up to 99.0% is achieved. The corrosion rates of zinc and its alloys are found to be comparable with those of mercury-bearing zinc in the chosen electrolytes. It is concluded that both dry cells and Zn-air batteries can be constructed with the above anodes and alkaline electrolytes. Thus, the presence of mercury, either in the anode or in the electrolyte, is avoided.