Science.gov

Sample records for alkane c-h bonds

  1. Transition Metal-Catalyzed Carbonylative C-H Bond Functionalization of Arenes and C(sp(3))-H Bond of Alkanes.

    PubMed

    Gadge, Sandip T; Gautam, Prashant; Bhanage, Bhalchandra M

    2016-04-01

    In this article, we present the progress made in the area of carbonylative C-H functionalization, with special emphasis on arenes and alkanes. The importance of directing group assistance and C-H functionalization using CO surrogates is also included. The budding development in the area of transition metal-catalyzed C(sp(3))-H activation makes us feel it necessary to file a summary on the past, as well as current, contributions and a prospective outlook on the transition metal-catalyzed carbonylative transformation of C-H bonds, which is the focus of this review. PMID:26969501

  2. Functionalization of non-activated C-H bonds of alkanes: an effective and recyclable catalytic system based on fluorinated silver catalysts and solvents.

    PubMed

    Fuentes, M Ángeles; Muñoz, Bianca K; Jacob, Kane; Vendier, Laure; Caballero, Ana; Etienne, Michel; Pérez, Pedro J

    2013-01-21

    The complexes F(n)-Tp(4Bo,3Rf)Ag(L) (F(n)-Tp(4Bo,3Rf)=a perfluorinated hydrotris(indazolyl) borate ligand; L=acetone or tetrahydrofuran) efficiently catalyze the functionalization of non-activated alkanes such as hexane, 2,3-dimethylbutane, or 2-methylpentane by insertion of CHCO(2)Et units (from N(2)CHCO(2)Et, ethyl diazoacetate, EDA) into their C-H bonds. The reactions are quantitative (EDA-based), with no byproducts derived from diazo coupling being formed. In the case of hexane, the functionalization of the methyl C-H bonds has been achieved with the highest regioselectivity known to date with this diazo compound. This catalytic system also operates under biphasic conditions by using fluorous solvents such as Fomblin or perfluorophenanthrene. Several cycles of catalyst recovery and reuse have been performed, with identical chemo- and regioselectivities.

  3. C-H fluorination: U can fluorinate unactivated bonds

    NASA Astrophysics Data System (ADS)

    Neumann, Constanze N.; Ritter, Tobias

    2016-09-01

    Introducing C-F bonds into organic molecules is a challenging task, particularly through C-H activation methods. Now, a uranium-based photocatalyst turns traditional selectivity rules on their heads and fluorinates unfunctionalized alkane Csp3-H bonds, even in the presence of C-H bonds that are typically more reactive.

  4. A Highly Reactive Mononuclear Non-Heme Manganese(IV)-Oxo Complex That Can Activate the Strong C-H Bonds of Alkanes

    SciTech Connect

    Wu, Xiujuan; Seo, Mi Sook; Davis, Katherine M; Lee, Yong-Min; Chen, Junying; Cho, Kyung-Bin; Pushkar, Yulia N; Nam, Wonwoo

    2012-03-15

    A mononuclear non-heme manganese(IV)-oxo complex has been synthesized and characterized using various spectroscopic methods. The Mn(IV)-oxo complex shows high reactivity in oxidation reactions, such as C-H bond activation, oxidations of olefins, alcohols, sulfides, and aromatic compounds, and N-dealkylation. In C-H bond activation, the Mn(IV)-oxo complex can activate C-H bonds as strong as those in cyclohexane. It is proposed that C-H bond activation by the non-heme Mn(IV)-oxo complex does not occur via an oxygen-rebound mechanism. The electrophilic character of the non-heme Mn(IV)-oxo complex is demonstrated by a large negative ρ value of ~4.4 in the oxidation of para-substituted thioanisoles.

  5. Low-temperature alkane C-H bond activation by zeolites: an in situ solid-state NMR H/D exchange study for a carbenium concerto.

    PubMed

    Haouas, Mohamed; Fink, Gerhard; Taulelle, Francis; Sommer, Jean

    2010-08-01

    Isotopic H/D exchange has been monitored by in situ MAS NMR spectroscopy of 2-[D(14)]methylpentane with H-USY to probe the controversy over the alkane conversion mechanism. The probe molecule has distinct exchangeable sites with different accessibility to the zeolite surface. In the early stages of the process, the regioselectivity of exchange demonstrates that the slow step of the mechanism is controlled by a carbenium ion intermediate. At a later stage of exchange, intramolecular hydride migrations, typical of carbenium chemistry, replace D by H also on other carbon atoms, resulting in a loss of regioselectivity. Therefore, the first and the subsequent steps of the H/D exchange proceed at this temperature through a carbenium intermediate species.

  6. Copper-catalyzed etherification of arene C-H bonds.

    PubMed

    Roane, James; Daugulis, Olafs

    2013-11-15

    A method for direct, auxiliary-assisted alkoxylation and phenoxylation of β-sp(2) C-H bonds of benzoic acid derivatives and γ-sp(2) C-H bonds of amine derivatives is reported. The reaction employs (CuOH)2CO3 catalyst, air as an oxidant, phenol or alcohol coupling partner, DMF, pyridine, or DMPU solvent, and K2CO3, tetramethylguanidine, or K3PO4 base at 70-130 °C. PMID:24180517

  7. Transition metal activation and functionalization of C-H bonds. Progress report, June 1, 1983-May 31, 1986

    SciTech Connect

    Jones, W.D.

    1986-11-01

    This project has been directed towards the investigation of the fundamental thermodynamic and kinetic factors that influence carbon-hydrogen bond activation at homogeneous transition metal centers. The major accomplishments of this past three years have been: (1) to identify a new transition metal complex capable of activating both arene and alkane C-H bonds, (2) to quantitatively evaluate the stability of the hydrido aryl and hydrido alkyl complexes towards reductive elimination, (3) to measure the kinetic selectivity of the reactive intermediate towards alkane and arene C-H bonds, (4) to quantitatively determine the thermodynamics of alkane and arene oxidative addition, (5) to demonstrate that arenes are activated by way of formation of an eta/sup 2/-arene complex, (6) to quantitatively determine the kinetic and thermodynamic preference for intra vs intermolecular activation of arene and alkane C-H bonds, (7) to measure isotope effects for the oxidative addition/reductive elimination pathways as a means of confirming the proposed mechanism of reaction, and (8) to formulate a unified theory of C-H bond activation that applies to other transition metal complexes. The specific complexes involved in these studies are derivatives of the formulation (C/sub 5/Me/sub 5/)Rh(PMe/sub 3/)(R)H and (C/sub 5/Me/sub 5/)Rh(PMe/sub 2/R) (R)H.

  8. C-H bond activation by f-block complexes.

    PubMed

    Arnold, Polly L; McMullon, Max W; Rieb, Julia; Kühn, Fritz E

    2015-01-01

    Most homogeneous catalysis relies on the design of metal complexes to trap and convert substrates or small molecules to value-added products. Organometallic lanthanide compounds first gave a tantalizing glimpse of their potential for catalytic C-H bond transformations with the selective cleavage of one C-H bond in methane by bis(permethylcyclopentadienyl)lanthanide methyl [(η(5) -C5 Me5 )2 Ln(CH3 )] complexes some 25 years ago. Since then, numerous metal complexes from across the periodic table have been shown to selectively activate hydrocarbon C-H bonds, but the challenges of closing catalytic cycles still remain; many f-block complexes show great potential in this important area of chemistry.

  9. C-H bond activation by f-block complexes.

    PubMed

    Arnold, Polly L; McMullon, Max W; Rieb, Julia; Kühn, Fritz E

    2015-01-01

    Most homogeneous catalysis relies on the design of metal complexes to trap and convert substrates or small molecules to value-added products. Organometallic lanthanide compounds first gave a tantalizing glimpse of their potential for catalytic C-H bond transformations with the selective cleavage of one C-H bond in methane by bis(permethylcyclopentadienyl)lanthanide methyl [(η(5) -C5 Me5 )2 Ln(CH3 )] complexes some 25 years ago. Since then, numerous metal complexes from across the periodic table have been shown to selectively activate hydrocarbon C-H bonds, but the challenges of closing catalytic cycles still remain; many f-block complexes show great potential in this important area of chemistry. PMID:25384554

  10. Site-selective and stereoselective functionalization of unactivated C-H bonds

    NASA Astrophysics Data System (ADS)

    Liao, Kuangbiao; Negretti, Solymar; Musaev, Djamaladdin G.; Bacsa, John; Davies, Huw M. L.

    2016-05-01

    The laboratory synthesis of complex organic molecules relies heavily on the introduction and manipulation of functional groups, such as carbon-oxygen or carbon-halogen bonds; carbon-hydrogen bonds are far less reactive and harder to functionalize selectively. The idea of C-H functionalization, in which C-H bonds are modified at will instead of the functional groups, represents a paradigm shift in the standard logic of organic synthesis. For this approach to be generally useful, effective strategies for site-selective C-H functionalization need to be developed. The most practical solutions to the site-selectivity problem rely on either intramolecular reactions or the use of directing groups within the substrate. A challenging, but potentially more flexible approach, would be to use catalyst control to determine which site in a particular substrate would be functionalized. Here we describe the use of dirhodium catalysts to achieve highly site-selective, diastereoselective and enantioselective C-H functionalization of n-alkanes and terminally substituted n-alkyl compounds. The reactions proceed in high yield, and functional groups such as halides, silanes and esters are compatible with this chemistry. These studies demonstrate that high site selectivity is possible in C-H functionalization reactions without the need for a directing or anchoring group present in the molecule.

  11. Pathways and kinetics of methane and ethane C-H bond cleavage on PdO(101).

    PubMed

    Antony, Abbin; Asthagiri, Aravind; Weaver, Jason F

    2013-09-14

    We used conventional density functional theory (DFT) and dispersion-corrected DFT (DFT-D3) calculations to investigate C-H bond activation pathways for methane and ethane σ-complexes adsorbed on the PdO(101) surface. The DFT-D3 calculations predict lower and more physically realistic values of the apparent C-H bond cleavage barriers, which are defined relative to the gas-phase energy level, while giving nearly the same energy differences between stationary states as predicted by conventional DFT for a given reaction pathway. For the stable CH4 η(2) complex on PdO(101), DFT-D3 predicts that the C-H bond cleavage barriers are 55.2 and 16.1 kJ∕mol relative to the initial molecularly adsorbed and gaseous states, respectively. We also predict that dehydrogenation of the resulting CH3 groups and conversion to CH3O species are significantly more energetically demanding than the initial C-H bond activation of CH4 on PdO(101). Using DFT-D3, we find that an η(2) and an η(1) ethane complex can undergo C-H bond cleavage on PdO(101) with intrinsic energy barriers that are similar to that of the methane complex, but with apparent barriers that are close to zero. We also investigated the dissociation kinetics of methane and ethane on PdO(101) using microkinetic models, with parameters derived from the DFT-D3 relaxed structures. We find that a so-called 3N - 2 model, in which two frustrated adsorbate motions are treated as free motions, predicts desorption pre-factors and alkane dissociation probabilities that agree well with estimates obtained from the literature. The microkinetic simulations demonstrate the importance of accurately describing entropic contributions in kinetic simulations of alkane dissociative chemisorption.

  12. Pathways and kinetics of methane and ethane C-H bond cleavage on PdO(101)

    NASA Astrophysics Data System (ADS)

    Antony, Abbin; Asthagiri, Aravind; Weaver, Jason F.

    2013-09-01

    We used conventional density functional theory (DFT) and dispersion-corrected DFT (DFT-D3) calculations to investigate C-H bond activation pathways for methane and ethane σ-complexes adsorbed on the PdO(101) surface. The DFT-D3 calculations predict lower and more physically realistic values of the apparent C-H bond cleavage barriers, which are defined relative to the gas-phase energy level, while giving nearly the same energy differences between stationary states as predicted by conventional DFT for a given reaction pathway. For the stable CH4 η2 complex on PdO(101), DFT-D3 predicts that the C-H bond cleavage barriers are 55.2 and 16.1 kJ/mol relative to the initial molecularly adsorbed and gaseous states, respectively. We also predict that dehydrogenation of the resulting CH3 groups and conversion to CH3O species are significantly more energetically demanding than the initial C-H bond activation of CH4 on PdO(101). Using DFT-D3, we find that an η2 and an η1 ethane complex can undergo C-H bond cleavage on PdO(101) with intrinsic energy barriers that are similar to that of the methane complex, but with apparent barriers that are close to zero. We also investigated the dissociation kinetics of methane and ethane on PdO(101) using microkinetic models, with parameters derived from the DFT-D3 relaxed structures. We find that a so-called 3N - 2 model, in which two frustrated adsorbate motions are treated as free motions, predicts desorption pre-factors and alkane dissociation probabilities that agree well with estimates obtained from the literature. The microkinetic simulations demonstrate the importance of accurately describing entropic contributions in kinetic simulations of alkane dissociative chemisorption.

  13. Pathways and kinetics of methane and ethane C-H bond cleavage on PdO(101).

    PubMed

    Antony, Abbin; Asthagiri, Aravind; Weaver, Jason F

    2013-09-14

    We used conventional density functional theory (DFT) and dispersion-corrected DFT (DFT-D3) calculations to investigate C-H bond activation pathways for methane and ethane σ-complexes adsorbed on the PdO(101) surface. The DFT-D3 calculations predict lower and more physically realistic values of the apparent C-H bond cleavage barriers, which are defined relative to the gas-phase energy level, while giving nearly the same energy differences between stationary states as predicted by conventional DFT for a given reaction pathway. For the stable CH4 η(2) complex on PdO(101), DFT-D3 predicts that the C-H bond cleavage barriers are 55.2 and 16.1 kJ∕mol relative to the initial molecularly adsorbed and gaseous states, respectively. We also predict that dehydrogenation of the resulting CH3 groups and conversion to CH3O species are significantly more energetically demanding than the initial C-H bond activation of CH4 on PdO(101). Using DFT-D3, we find that an η(2) and an η(1) ethane complex can undergo C-H bond cleavage on PdO(101) with intrinsic energy barriers that are similar to that of the methane complex, but with apparent barriers that are close to zero. We also investigated the dissociation kinetics of methane and ethane on PdO(101) using microkinetic models, with parameters derived from the DFT-D3 relaxed structures. We find that a so-called 3N - 2 model, in which two frustrated adsorbate motions are treated as free motions, predicts desorption pre-factors and alkane dissociation probabilities that agree well with estimates obtained from the literature. The microkinetic simulations demonstrate the importance of accurately describing entropic contributions in kinetic simulations of alkane dissociative chemisorption. PMID:24050357

  14. Trapping a Highly Reactive Nonheme Iron Intermediate That Oxygenates Strong C-H Bonds with Stereoretention.

    PubMed

    Serrano-Plana, Joan; Oloo, Williamson N; Acosta-Rueda, Laura; Meier, Katlyn K; Verdejo, Begoña; García-España, Enrique; Basallote, Manuel G; Münck, Eckard; Que, Lawrence; Company, Anna; Costas, Miquel

    2015-12-23

    An unprecedentedly reactive iron species (2) has been generated by reaction of excess peracetic acid with a mononuclear iron complex [Fe(II)(CF3SO3)2(PyNMe3)] (1) at cryogenic temperatures, and characterized spectroscopically. Compound 2 is kinetically competent for breaking strong C-H bonds of alkanes (BDE ≈ 100 kcal·mol(-1)) through a hydrogen-atom transfer mechanism, and the transformations proceed with stereoretention and regioselectively, responding to bond strength, as well as to steric and polar effects. Bimolecular reaction rates are at least an order of magnitude faster than those of the most reactive synthetic high-valent nonheme oxoiron species described to date. EPR studies in tandem with kinetic analysis show that the 490 nm chromophore of 2 is associated with two S = 1/2 species in rapid equilibrium. The minor component 2a (∼5% iron) has g-values at 2.20, 2.19, and 1.99 characteristic of a low-spin iron(III) center, and it is assigned as [Fe(III)(OOAc)(PyNMe3)](2+), also by comparison with the EPR parameters of the structurally characterized hydroxamate analogue [Fe(III)(tBuCON(H)O)(PyNMe3)](2+) (4). The major component 2b (∼40% iron, g-values = 2.07, 2.01, 1.95) has unusual EPR parameters, and it is proposed to be [Fe(V)(O)(OAc)(PyNMe3)](2+), where the O-O bond in 2a has been broken. Consistent with this assignment, 2b undergoes exchange of its acetate ligand with CD3CO2D and very rapidly reacts with olefins to produce the corresponding cis-1,2-hydroxoacetate product. Therefore, this work constitutes the first example where a synthetic nonheme iron species responsible for stereospecific and site selective C-H hydroxylation is spectroscopically trapped, and its catalytic reactivity against C-H bonds can be directly interrogated by kinetic methods. The accumulated evidence indicates that 2 consists mainly of an extraordinarily reactive [Fe(V)(O)(OAc)(PyNMe3)](2+) (2b) species capable of hydroxylating unactivated alkyl C-H bonds with

  15. Trapping a Highly Reactive Nonheme Iron Intermediate That Oxygenates Strong C-H Bonds with Stereoretention.

    PubMed

    Serrano-Plana, Joan; Oloo, Williamson N; Acosta-Rueda, Laura; Meier, Katlyn K; Verdejo, Begoña; García-España, Enrique; Basallote, Manuel G; Münck, Eckard; Que, Lawrence; Company, Anna; Costas, Miquel

    2015-12-23

    An unprecedentedly reactive iron species (2) has been generated by reaction of excess peracetic acid with a mononuclear iron complex [Fe(II)(CF3SO3)2(PyNMe3)] (1) at cryogenic temperatures, and characterized spectroscopically. Compound 2 is kinetically competent for breaking strong C-H bonds of alkanes (BDE ≈ 100 kcal·mol(-1)) through a hydrogen-atom transfer mechanism, and the transformations proceed with stereoretention and regioselectively, responding to bond strength, as well as to steric and polar effects. Bimolecular reaction rates are at least an order of magnitude faster than those of the most reactive synthetic high-valent nonheme oxoiron species described to date. EPR studies in tandem with kinetic analysis show that the 490 nm chromophore of 2 is associated with two S = 1/2 species in rapid equilibrium. The minor component 2a (∼5% iron) has g-values at 2.20, 2.19, and 1.99 characteristic of a low-spin iron(III) center, and it is assigned as [Fe(III)(OOAc)(PyNMe3)](2+), also by comparison with the EPR parameters of the structurally characterized hydroxamate analogue [Fe(III)(tBuCON(H)O)(PyNMe3)](2+) (4). The major component 2b (∼40% iron, g-values = 2.07, 2.01, 1.95) has unusual EPR parameters, and it is proposed to be [Fe(V)(O)(OAc)(PyNMe3)](2+), where the O-O bond in 2a has been broken. Consistent with this assignment, 2b undergoes exchange of its acetate ligand with CD3CO2D and very rapidly reacts with olefins to produce the corresponding cis-1,2-hydroxoacetate product. Therefore, this work constitutes the first example where a synthetic nonheme iron species responsible for stereospecific and site selective C-H hydroxylation is spectroscopically trapped, and its catalytic reactivity against C-H bonds can be directly interrogated by kinetic methods. The accumulated evidence indicates that 2 consists mainly of an extraordinarily reactive [Fe(V)(O)(OAc)(PyNMe3)](2+) (2b) species capable of hydroxylating unactivated alkyl C-H bonds with

  16. Transition-Metal-Catalyzed Redox-Neutral and Redox-Green C-H Bond Functionalization.

    PubMed

    Wang, Hongli; Huang, Hanmin

    2016-08-01

    Transition-metal-catalyzed C-H bond functionalization has become one of the most promising strategies to prepare complex molecules from simple precursors. However, the utilization of environmentally unfriendly oxidants in the oxidative C-H bond functionalization reactions reduces their potential applications in organic synthesis. This account describes our recent efforts in the development of a redox-neutral C-H bond functionalization strategy for direct addition of inert C-H bonds to unsaturated double bonds and a redox-green C-H bond functionalization strategy for realization of oxidative C-H functionalization with O2 as the sole oxidant, aiming to circumvent the problems posed by utilizing environmentally unfriendly oxidants. In principle, these redox-neutral and redox-green strategies pave the way for establishing new environmentally benign transition-metal-catalyzed C-H bond functionalization strategies.

  17. Transition-Metal-Catalyzed Redox-Neutral and Redox-Green C-H Bond Functionalization.

    PubMed

    Wang, Hongli; Huang, Hanmin

    2016-08-01

    Transition-metal-catalyzed C-H bond functionalization has become one of the most promising strategies to prepare complex molecules from simple precursors. However, the utilization of environmentally unfriendly oxidants in the oxidative C-H bond functionalization reactions reduces their potential applications in organic synthesis. This account describes our recent efforts in the development of a redox-neutral C-H bond functionalization strategy for direct addition of inert C-H bonds to unsaturated double bonds and a redox-green C-H bond functionalization strategy for realization of oxidative C-H functionalization with O2 as the sole oxidant, aiming to circumvent the problems posed by utilizing environmentally unfriendly oxidants. In principle, these redox-neutral and redox-green strategies pave the way for establishing new environmentally benign transition-metal-catalyzed C-H bond functionalization strategies. PMID:27258190

  18. Reactivity of oxygen radical anions bound to scandia nanoparticles in the gas phase: C-H bond activation.

    PubMed

    Tian, Li-Hua; Meng, Jing-Heng; Wu, Xiao-Nan; Zhao, Yan-Xia; Ding, Xun-Lei; He, Sheng-Gui; Ma, Tong-Mei

    2014-01-20

    The activation of C-H bonds in alkanes is currently a hot research topic in chemistry. The atomic oxygen radical anion (O(-·)) is an important species in C-H activation. The mechanistic details of C-H activation by O(-·) radicals can be well understood by studying the reactions between O(-·) containing transition metal oxide clusters and alkanes. Here the reactivity of scandium oxide cluster anions toward n-butane was studied by using a high-resolution time-of-flight mass spectrometer coupled with a fast flow reactor. Hydrogen atom abstraction (HAA) from n-butane by (Sc2O3)(N)O(-) (N=1-18) clusters was observed. The reactivity of (Sc2O3)(N)O(-) (N=1-18) clusters is significantly sizedependent and the highest reactivity was observed for N=4 (Sc8O13(-)) and 12 (Sc24O37(-)). Larger (Sc2O3)(N)O(-) clusters generally have higher reactivity than the smaller ones. Density functional theory calculations were performed to interpret the reactivity of (Sc2O3)(N)O(-) (N=1-5) clusters, which were found to contain the O(-·) radicals as the active sites. The local charge environment around the O(-·) radicals was demonstrated to control the experimentally observed size-dependent reactivity. This work is among the first to report HAA reactivity of cluster anions with dimensions up to nanosize toward alkane molecules. The anionic O(-·) containing scandium oxide clusters are found to be more reactive than the corresponding cationic ones in the C-H bond activation. PMID:24338790

  19. Infrared Spectroscopic Investigation on CH Bond Acidity in Cationic Alkanes

    NASA Astrophysics Data System (ADS)

    Matsuda, Yoshiyuki; Xie, Min; Fujii, Asuka

    2016-06-01

    We have demonstrated large enhancements of CH bond acidities in alcohol, ether, and amine cations through infrared predissociation spectroscopy based on the vacuum ultraviolet photoionization detection. In this study, we investigate for the cationic alkanes (pentane, hexane, and heptane) with different alkyl chain lengths. The σ electrons are ejected in the ionization of alkanes, while nonbonding electrons are ejected in ionization of alcohols, ethers, and amines. Nevertheless, the acidity enhancements of CH in these cationic alkanes have also been demonstrated by infrared spectroscopy. The correlations of their CH bond acidities with the alkyl chain lengths as well as the mechanisms of their acidity enhancements will be discussed by comparison of infrared spectra and theoretical calculations.

  20. Iridium-Catalyzed, Hydrosilyl-Directed Borylation of Unactivated Alkyl C-H Bonds.

    PubMed

    Larsen, Matthew A; Cho, Seung Hwan; Hartwig, John

    2016-01-27

    We report the iridium-catalyzed borylation of primary and secondary alkyl C-H bonds directed by a Si-H group to form alkylboronate esters site selectively. The reactions occur with high selectivity at primary C-H bonds γ to the hydrosilyl group to form primary alkyl bisboronate esters. In the absence of such primary C-H bonds, the borylation occurs selectively at a secondary C-H bond γ to the hydrosilyl group, and these reactions of secondary C-H bonds occur with high diastereoselectivity. The hydrosilyl-containing alkyl boronate esters formed by this method undergo transformations selectively at the carbon-boron or carbon-silicon bonds of these products under distinct conditions to give the products of amination, oxidation, and arylation.

  1. Propane σ-Complexes on PdO(101): Spectroscopic Evidence of the Selective Coordination and Activation of Primary C-H Bonds.

    PubMed

    Zhang, Feng; Pan, Li; Choi, Juhee; Mehar, Vikram; Diulus, John T; Asthagiri, Aravind; Weaver, Jason F

    2015-11-16

    Achieving selective C-H bond cleavage is critical for developing catalytic processes that transform small alkanes to value-added products. The present study clarifies the molecular-level origin for an exceptionally strong preference for propane to dissociate on the crystalline PdO(101) surface via primary C-H bond cleavage. Using reflection absorption infrared spectroscopy (RAIRS) and density functional theory (DFT) calculations, we show that adsorbed propane σ-complexes preferentially adopt geometries on PdO(101) in which only primary C-H bonds datively interact with the surface Pd atoms at low propane coverages and are thus activated under typical catalytic reaction conditions. We show that a propane molecule achieves maximum stability on PdO(101) by adopting a bidentate geometry in which a H-Pd dative bond forms at each CH3 group. These results demonstrate that structural registry between the molecule and surface can strongly influence the selectivity of a metal oxide surface in activating alkane C-H bonds. PMID:26420576

  2. Electrophilic, Ambiphilic, and Nucleophilic C-H bond Activation. Understanding the electronic continuum of C-H bond activation through transition-state and reaction pathway interaction energy decompositions

    SciTech Connect

    Ess, Daniel H.; Goddard, William A.; Periana, Roy A.

    2010-10-29

    The potential energy and interaction energy profiles for metal- and metal-ligand-mediated alkane C-H bond activation were explored using B3LYP density functional theory (DFT) and the absolutely localized molecular orbital energy decomposition analysis (ALMO-EDA). The set of complexes explored range from late transition metal group 10 (Pt and Pd) and group 11 (Au) metal centers to group 7-9 (Ir, Rh, Ru, and W) metal centers as well as a group 3 Sc complex. The coordination geometries, electron metal count (d8, d6, d4, and d0), and ligands (N-heterocycles, O-donor, phosphine, and Cp*) are also diverse. Quantitative analysis using ALMO-EDA of both directions of charge-transfer stabilization (occupied to unoccupied orbital stabilization) energies between the metal-ligand fragment and the coordinated C-H bond in the transition state for cleavage of the C-H bond allows classification of C-H activation reactions as electrophilic, ambiphilic, or nucleophilic on the basis of the net direction of charge-transfer energy stabilization. This bonding pattern transcends any specific mechanistic or bonding paradigm, such as oxidative addition, σ-bond metathesis, or substitution. Late transition metals such as Au(III), Pt(II), Pd(II), and Rh(III) metal centers with N-heterocycle, halide, or O-donor ligands show electrophilically dominated reaction profiles with forward charge-transfer from the C-H bond to the metal, leading to more stabilization than reverse charge transfer from the metal to the C-H bond. Transition states and reaction profiles for d6 Ru(II) and Ir(III) metals with Tp and acac ligands were found to have nearly equal forward and reverse charge-transfer energy stabilization. This ambiphilic region also includes the classically labeled electrophilic cationic species Cp*(PMe3)Ir(Me). Nucleophilic character, where the metal to C-H bond charge-transfer interaction is most stabilizing, was found in

  3. A convenient photocatalytic fluorination of unactivated C-H bonds.

    PubMed

    Halperin, Shira D; Fan, Hope; Chang, Stanley; Martin, Rainer E; Britton, Robert

    2014-04-25

    Fluorination reactions are essential to modern medicinal chemistry, thus providing a means to block site-selective metabolic degradation of drugs and access radiotracers for positron emission tomography imaging. Despite current sophistication in fluorination reagents and processes, the fluorination of unactivated CH bonds remains a significant challenge. Reported herein is a convenient and economic process for direct fluorination of unactivated CH bonds that exploits the hydrogen abstracting ability of a decatungstate photocatalyst in combination with the mild fluorine atom transfer reagent N-fluorobenzenesulfonimide. This operationally straightforward reaction provides direct access to a wide range of fluorinated organic molecules, including structurally complex natural products, acyl fluorides, and fluorinated amino acid derivatives.

  4. Cu(OAc)2-catalyzed coupling of aromatic C-H bonds with arylboron reagents.

    PubMed

    Shang, Ming; Sun, Shang-Zheng; Dai, Hui-Xiong; Yu, Jin-Quan

    2014-11-01

    Cu-catalyzed coupling of aryl C-H bonds with arylboron reagents was accomplished using a readily removable directing group, which provides a useful method for the synthesis of biaryl compounds. The distinct transmetalation step in this Cu-catalyzed C-H coupling with aryl borons provides unique evidence for the formation of an aryl cupperate intermediate. PMID:25325402

  5. Facile P-C/C-H Bond-Cleavage Reactivity of Nickel Bis(diphosphine) Complexes.

    PubMed

    Zhang, Shaoguang; Li, Haixia; Appel, Aaron M; Hall, Michael B; Bullock, R Morris

    2016-07-01

    Unusual cleavage of P-C and C-H bonds of the P2 N2 ligand, in heteroleptic [Ni(P2 N2 )(diphosphine)](2+) complexes under mild conditions, results in the formation of an iminium formyl nickelate featuring a C,P,P-tridentate coordination mode. The structures of both the heteroleptic [Ni(P2 N2 )(diphosphine)](2+) complexes and the resulting iminium formyl nickelate have been characterized by NMR spectroscopy and single-crystal X-ray diffraction analysis. Density functional theory (DFT) calculations were employed to investigate the mechanism of the P-C/C-H bond cleavage, which involves C-H bond cleavage, hydride rotation, Ni-C/P-H bond formation, and P-C bond cleavage. PMID:27189413

  6. The direct arylation of allylic sp(3) C-H bonds via organic and photoredox catalysis.

    PubMed

    Cuthbertson, James D; MacMillan, David W C

    2015-03-01

    The direct functionalization of unactivated sp(3) C-H bonds is still one of the most challenging problems facing synthetic organic chemists. The appeal of such transformations derives from their capacity to facilitate the construction of complex organic molecules via the coupling of simple and otherwise inert building blocks, without introducing extraneous functional groups. Despite notable recent efforts, the establishment of general and mild strategies for the engagement of sp(3) C-H bonds in C-C bond forming reactions has proved difficult. Within this context, the discovery of chemical transformations that are able to directly functionalize allylic methyl, methylene and methine carbons in a catalytic manner is a priority. Although protocols for direct oxidation and amination of allylic C-H bonds (that is, C-H bonds where an adjacent carbon is involved in a C = C bond) have become widely established, the engagement of allylic substrates in C-C bond forming reactions has thus far required the use of pre-functionalized coupling partners. In particular, the direct arylation of non-functionalized allylic systems would enable access to a series of known pharmacophores (molecular features responsible for a drug's action), though a general solution to this long-standing challenge remains elusive. Here we report the use of both photoredox and organic catalysis to accomplish a mild, broadly effective direct allylic C-H arylation. This C-C bond forming reaction readily accommodates a broad range of alkene and electron-deficient arene reactants, and has been used in the direct arylation of benzylic C-H bonds. PMID:25739630

  7. The direct arylation of allylic sp(3) C-H bonds via organic and photoredox catalysis.

    PubMed

    Cuthbertson, James D; MacMillan, David W C

    2015-03-01

    The direct functionalization of unactivated sp(3) C-H bonds is still one of the most challenging problems facing synthetic organic chemists. The appeal of such transformations derives from their capacity to facilitate the construction of complex organic molecules via the coupling of simple and otherwise inert building blocks, without introducing extraneous functional groups. Despite notable recent efforts, the establishment of general and mild strategies for the engagement of sp(3) C-H bonds in C-C bond forming reactions has proved difficult. Within this context, the discovery of chemical transformations that are able to directly functionalize allylic methyl, methylene and methine carbons in a catalytic manner is a priority. Although protocols for direct oxidation and amination of allylic C-H bonds (that is, C-H bonds where an adjacent carbon is involved in a C = C bond) have become widely established, the engagement of allylic substrates in C-C bond forming reactions has thus far required the use of pre-functionalized coupling partners. In particular, the direct arylation of non-functionalized allylic systems would enable access to a series of known pharmacophores (molecular features responsible for a drug's action), though a general solution to this long-standing challenge remains elusive. Here we report the use of both photoredox and organic catalysis to accomplish a mild, broadly effective direct allylic C-H arylation. This C-C bond forming reaction readily accommodates a broad range of alkene and electron-deficient arene reactants, and has been used in the direct arylation of benzylic C-H bonds.

  8. The direct arylation of allylic sp3 C-H bonds via organic and photoredox catalysis

    NASA Astrophysics Data System (ADS)

    Cuthbertson, James D.; MacMillan, David W. C.

    2015-03-01

    The direct functionalization of unactivated sp3 C-H bonds is still one of the most challenging problems facing synthetic organic chemists. The appeal of such transformations derives from their capacity to facilitate the construction of complex organic molecules via the coupling of simple and otherwise inert building blocks, without introducing extraneous functional groups. Despite notable recent efforts, the establishment of general and mild strategies for the engagement of sp3 C-H bonds in C-C bond forming reactions has proved difficult. Within this context, the discovery of chemical transformations that are able to directly functionalize allylic methyl, methylene and methine carbons in a catalytic manner is a priority. Although protocols for direct oxidation and amination of allylic C-H bonds (that is, C-H bonds where an adjacent carbon is involved in a C = C bond) have become widely established, the engagement of allylic substrates in C-C bond forming reactions has thus far required the use of pre-functionalized coupling partners. In particular, the direct arylation of non-functionalized allylic systems would enable access to a series of known pharmacophores (molecular features responsible for a drug's action), though a general solution to this long-standing challenge remains elusive. Here we report the use of both photoredox and organic catalysis to accomplish a mild, broadly effective direct allylic C-H arylation. This C-C bond forming reaction readily accommodates a broad range of alkene and electron-deficient arene reactants, and has been used in the direct arylation of benzylic C-H bonds.

  9. Base-mediated intermolecular sp2 C-H bond arylation via benzyne intermediates.

    PubMed

    Truong, Thanh; Daugulis, Olafs

    2011-03-30

    A transition-metal-free method for arylation of heterocycle and arene carbon-hydrogen bonds by aryl chlorides and fluorides has been developed. The reactions proceed via aryne intermediates and are highly regioselective with respect to the C-H bond coupling component.

  10. Rhodium catalyzed chelation-assisted C-H bond functionalization reactions.

    PubMed

    Colby, Denise A; Tsai, Andy S; Bergman, Robert G; Ellman, Jonathan A

    2012-06-19

    Over the last several decades, researchers have achieved remarkable progress in the field of organometallic chemistry. The development of metal-catalyzed cross-coupling reactions represents a paradigm shift in chemical synthesis, and today synthetic chemists can readily access carbon-carbon and carbon-heteroatom bonds from a vast array of starting compounds. Although we cannot understate the importance of these methods, the required prefunctionalization to carry out these reactions adds cost and reduces the availability of the starting reagents. The use of C-H bond activation in lieu of prefunctionalization has presented a tantalizing alternative to classical cross-coupling reactions. Researchers have met the challenges of selectivity and reactivity associated with the development of C-H bond functionalization reactions with an explosion of creative advances in substrate and catalyst design. Literature reports on selectivity based on steric effects, acidity, and electronic and directing group effects are now numerous. Our group has developed an array of C-H bond functionalization reactions that take advantage of a chelating directing group, and this Account surveys our progress in this area. The use of chelation control in C-H bond functionalization offers several advantages with respect to substrate scope and application to total synthesis. The predictability and decreased dependence on the inherent stereoelectronics of the substrate generally result in selective and high yielding transformations with broad applicability. The nature of the chelating moiety can be chosen to serve as a functional handle in subsequent elaborations. Our work began with the use of Rh(I) catalysts in intramolecular aromatic C-H annulations, which we further developed to include enantioselective transformations. The application of this chemistry to the simple olefinic C-H bonds found in α,β-unsaturated imines allowed access to highly substituted olefins, pyridines, and piperidines. We

  11. Transition metal-free intramolecular regioselective couplings of aliphatic and aromatic C-H bonds.

    PubMed

    Tian, Hua; Yang, Haijun; Zhu, Changjin; Fu, Hua

    2016-01-29

    Cross-dehydrogenative couplings of two different C-H bonds have emerged as an attractive goal in organic synthesis. However, achieving regioselective C-H activation is a great challenge because C-H bonds are ubiquitous in organic compounds. Actually, the regioselective couplings promoted by enzymes are a common occurrence in nature. Herein, we have developed simple, efficient and general transition metal-free intramolecular couplings of alphatic and aromatic C-H bonds. The protocol uses readily available aryl triazene as the radical initiator, cheap K2S2O8 as the oxidant, and the couplings were performed well with excellent tolerance of functional groups. Interestingly, α-carbon configuration of some amino acid residues in the substrates was kept after the reactions, and the couplings for substrates with substituted phenylalanine residues exhibited complete β-carbon diastereoselectivity for induction of the chiral α-carbon. Therefore, the present study should provide a novel strategy for regioselective cross-dehydrogenative couplings of two different C-H bonds.

  12. Transition metal-free intramolecular regioselective couplings of aliphatic and aromatic C-H bonds

    PubMed Central

    Tian, Hua; Yang, Haijun; Zhu, Changjin; Fu, Hua

    2016-01-01

    Cross-dehydrogenative couplings of two different C-H bonds have emerged as an attractive goal in organic synthesis. However, achieving regioselective C-H activation is a great challenge because C-H bonds are ubiquitous in organic compounds. Actually, the regioselective couplings promoted by enzymes are a common occurrence in nature. Herein, we have developed simple, efficient and general transition metal-free intramolecular couplings of alphatic and aromatic C-H bonds. The protocol uses readily available aryl triazene as the radical initiator, cheap K2S2O8 as the oxidant, and the couplings were performed well with excellent tolerance of functional groups. Interestingly, α-carbon configuration of some amino acid residues in the substrates was kept after the reactions, and the couplings for substrates with substituted phenylalanine residues exhibited complete β-carbon diastereoselectivity for induction of the chiral α-carbon. Therefore, the present study should provide a novel strategy for regioselective cross-dehydrogenative couplings of two different C-H bonds. PMID:26822836

  13. Metal-catalysed azidation of tertiary C-H bonds suitable for late-stage functionalization.

    PubMed

    Sharma, Ankit; Hartwig, John F

    2015-01-29

    Many enzymes oxidize unactivated aliphatic C-H bonds selectively to form alcohols; however, biological systems do not possess enzymes that catalyse the analogous aminations of C-H bonds. The absence of such enzymes limits the discovery of potential medicinal candidates because nitrogen-containing groups are crucial to the biological activity of therapeutic agents and clinically useful natural products. In one prominent example illustrating the importance of incorporating nitrogen-based functionality, the conversion of the ketone of erythromycin to the -N(Me)CH2- group in azithromycin leads to a compound that can be dosed once daily with a shorter treatment time. For such reasons, synthetic chemists have sought catalysts that directly convert C-H bonds to C-N bonds. Most currently used catalysts for C-H bond amination are ill suited to the intermolecular functionalization of complex molecules because they require excess substrate or directing groups, harsh reaction conditions, weak or acidic C-H bonds, or reagents containing specialized groups on the nitrogen atom. Among C-H bond amination reactions, those forming a C-N bond at a tertiary alkyl group would be particularly valuable, because this linkage is difficult to form from ketones or alcohols that might be created in a biosynthetic pathway by oxidation. Here we report a mild, selective, iron-catalysed azidation of tertiary C-H bonds that occurs without excess of the valuable substrate. The reaction tolerates aqueous environments and is suitable for the functionalization of complex structures in the late stages of a multistep synthesis. Moreover, this azidation makes it possible to install a range of nitrogen-based functional groups, including those from Huisgen 'click' cycloadditions and the Staudinger ligation. We anticipate that these reactions will create opportunities to modify natural products, their precursors and their derivatives to produce analogues that contain different polarity and charge as a

  14. Metal-catalysed azidation of tertiary C-H bonds suitable for late-stage functionalization

    NASA Astrophysics Data System (ADS)

    Sharma, Ankit; Hartwig, John F.

    2015-01-01

    Many enzymes oxidize unactivated aliphatic C-H bonds selectively to form alcohols; however, biological systems do not possess enzymes that catalyse the analogous aminations of C-H bonds. The absence of such enzymes limits the discovery of potential medicinal candidates because nitrogen-containing groups are crucial to the biological activity of therapeutic agents and clinically useful natural products. In one prominent example illustrating the importance of incorporating nitrogen-based functionality, the conversion of the ketone of erythromycin to the -N(Me)CH2- group in azithromycin leads to a compound that can be dosed once daily with a shorter treatment time. For such reasons, synthetic chemists have sought catalysts that directly convert C-H bonds to C-N bonds. Most currently used catalysts for C-H bond amination are ill suited to the intermolecular functionalization of complex molecules because they require excess substrate or directing groups, harsh reaction conditions, weak or acidic C-H bonds, or reagents containing specialized groups on the nitrogen atom. Among C-H bond amination reactions, those forming a C-N bond at a tertiary alkyl group would be particularly valuable, because this linkage is difficult to form from ketones or alcohols that might be created in a biosynthetic pathway by oxidation. Here we report a mild, selective, iron-catalysed azidation of tertiary C-H bonds that occurs without excess of the valuable substrate. The reaction tolerates aqueous environments and is suitable for the functionalization of complex structures in the late stages of a multistep synthesis. Moreover, this azidation makes it possible to install a range of nitrogen-based functional groups, including those from Huisgen `click' cycloadditions and the Staudinger ligation. We anticipate that these reactions will create opportunities to modify natural products, their precursors and their derivatives to produce analogues that contain different polarity and charge as a

  15. Palladium-Catalyzed Deaminative Phenanthridinone Synthesis from Aniline via C-H Bond Activation.

    PubMed

    Yedage, Subhash L; Bhanage, Bhalchandra M

    2016-05-20

    This work reports palladium-catalyzed phenanthridinone synthesis using the coupling of aniline and amide by formation of C-C and C-N bonds in a one-pot fashion via dual C-H bond activation. It involves simultaneous cleavage of four bonds and the formation of two new bonds. The present protocol is ligand-free, takes place under mild reaction conditions, and is environmentally benign as nitrogen gas and water are the only side products. This transformation demonstrates a broad range of aniline and amide substrates with different functional groups and has been scaled up to gram level. PMID:27088815

  16. Palladium-Catalyzed Deaminative Phenanthridinone Synthesis from Aniline via C-H Bond Activation.

    PubMed

    Yedage, Subhash L; Bhanage, Bhalchandra M

    2016-05-20

    This work reports palladium-catalyzed phenanthridinone synthesis using the coupling of aniline and amide by formation of C-C and C-N bonds in a one-pot fashion via dual C-H bond activation. It involves simultaneous cleavage of four bonds and the formation of two new bonds. The present protocol is ligand-free, takes place under mild reaction conditions, and is environmentally benign as nitrogen gas and water are the only side products. This transformation demonstrates a broad range of aniline and amide substrates with different functional groups and has been scaled up to gram level.

  17. Controlling site selectivity in palladium-catalyzed C-H bond functionalization.

    PubMed

    Neufeldt, Sharon R; Sanford, Melanie S

    2012-06-19

    Effective methodology to functionalize C-H bonds requires overcoming the key challenge of differentiating among the multitude of C-H bonds that are present in complex organic molecules. This Account focuses on our work over the past decade toward the development of site-selective Pd-catalyzed C-H functionalization reactions using the following approaches: substrate-based control over selectivity through the use of directing groups (approach 1), substrate control through the use of electronically activated substrates (approach 2), or catalyst-based control (approach 3). In our extensive exploration of the first approach, a number of selectivity trends have emerged for both sp(2) and sp(3) C-H functionalization reactions that hold true for a variety of transformations involving diverse directing groups. Functionalizations tend to occur at the less-hindered sp(2) C-H bond ortho to a directing group, at primary sp(3) C-H bonds that are β to a directing group, and, when multiple directing groups are present, at C-H sites proximal to the most basic directing group. Using approach 2, which exploits electronic biases within a substrate, our group has achieved C-2-selective arylation of indoles and pyrroles using diaryliodonium oxidants. The selectivity of these transformations is altered when the C-2 site of the heterocycle is blocked, leading to C-C bond formation at the C-3 position. While approach 3 (catalyst-based control) is still in its early stages of exploration, we have obtained exciting results demonstrating that site selectivity can be tuned by modifying the structure of the supporting ligands on the Pd catalyst. For example, by modulating the structure of N-N bidentate ligands, we have achieved exquisite levels of selectivity for arylation at the α site of naphthalene. Similarly, we have demonstrated that both the rate and site selectivity of arene acetoxylation depend on the ratio of pyridine (ligand) to Pd. Lastly, by switching the ligand on Pd from an

  18. Cobalt(III)-Catalyzed C-H Bond Amidation with Isocyanates.

    PubMed

    Hummel, Joshua R; Ellman, Jonathan A

    2015-05-15

    The first examples of cobalt(III)-catalyzed C-H bond addition to isocyanates are described, providing a convergent strategy for arene and heteroarene amidation. Using a robust air- and moisture-stable catalyst, this transformation demonstrates a broad isocyanate scope and good functional-group compatibility and has been performed on gram scale.

  19. Copper-catalyzed phosphorylation of sp(2) C-H bonds.

    PubMed

    Wang, Shan; Guo, Rui; Wang, Gao; Chen, Shan-Yong; Yu, Xiao-Qi

    2014-10-28

    The phosphorylation of the ortho C-H bonds in benzamides containing an 8-aminoquinoline moiety as a bidentate directing group with H-phosphonates using copper as a catalyst under mild temperature conditions is described. This method shows high functional group compatibility and selectively gives mono-substituted products. PMID:25204577

  20. Nickel-catalyzed synthesis of diarylsulfides and sulfones via C-H bond functionalization of arylamides.

    PubMed

    Reddy, Vutukuri Prakash; Qiu, Renhua; Iwasaki, Takanori; Kambe, Nobuaki

    2015-06-28

    The direct sulfenylation and sulfonylation of (sp(2))C-H bonds of benzamide derivatives were achieved using a Ni catalyst with the aid of an 8-aminoquinoline moiety as a bidentate directing group. These protocols represent a convenient route for the formation of valuable diaryl sulfides and sulfones in moderate to excellent yields. PMID:26006765

  1. Rhodium-Catalyzed C-C Bond Formation via Heteroatom-Directed C-H Bond Activation

    SciTech Connect

    Colby, Denise; Bergman, Robert; Ellman, Jonathan

    2010-05-13

    Once considered the 'holy grail' of organometallic chemistry, synthetically useful reactions employing C-H bond activation have increasingly been developed and applied to natural product and drug synthesis over the past decade. The ubiquity and relative low cost of hydrocarbons makes C-H bond functionalization an attractive alternative to classical C-C bond forming reactions such as cross-coupling, which require organohalides and organometallic reagents. In addition to providing an atom economical alternative to standard cross - coupling strategies, C-H bond functionalization also reduces the production of toxic by-products, thereby contributing to the growing field of reactions with decreased environmental impact. In the area of C-C bond forming reactions that proceed via a C-H activation mechanism, rhodium catalysts stand out for their functional group tolerance and wide range of synthetic utility. Over the course of the last decade, many Rh-catalyzed methods for heteroatom-directed C-H bond functionalization have been reported and will be the focus of this review. Material appearing in the literature prior to 2001 has been reviewed previously and will only be introduced as background when necessary. The synthesis of complex molecules from relatively simple precursors has long been a goal for many organic chemists. The ability to selectively functionalize a molecule with minimal pre-activation can streamline syntheses and expand the opportunities to explore the utility of complex molecules in areas ranging from the pharmaceutical industry to materials science. Indeed, the issue of selectivity is paramount in the development of all C-H bond functionalization methods. Several groups have developed elegant approaches towards achieving selectivity in molecules that possess many sterically and electronically similar C-H bonds. Many of these approaches are discussed in detail in the accompanying articles in this special issue of Chemical Reviews. One approach that has

  2. Phosphorylation of C-H bonds of aromatic compounds using metals and metal complexes

    NASA Astrophysics Data System (ADS)

    Budnikova, Yu H.; Sinyashin, O. G.

    2015-09-01

    Key achievements and current trends in the development of methods for phosphorylation of aromatic C-H bonds catalyzed by metal salts and complexes are considered. The most important and promising approaches of the last decade, including those concerning the synthesis and properties of arylphosphonates, are distinguished. Methods for the introduction of a phosphonate group into non-activated and functionally substituted aromatic compounds and heteroaromatic molecules and phosphorylation-cyclization reactions involving acetylenes, 2-isocyanobiphenyls and alkynoates are analyzed. The possibilities of ligand-directed phosphorylation of compounds with aromatic C-H bonds and presumed mechanisms and intermediates in the C-P bond formation reactions are considered. The potential of this extensively developing research trend in organic and organoelement chemistry is highlighted. The bibliography includes 263 references.

  3. C-H bond activation by metal-superoxo species: what drives high reactivity?

    PubMed

    Ansari, Azaj; Jayapal, Prabha; Rajaraman, Gopalan

    2015-01-01

    Metal-superoxo species are ubiquitous in metalloenzymes and bioinorganic chemistry and are known for their high reactivity and their ability to activate inert C-H bonds. The comparative oxidative abilities of M-O2(.-) species (M = Cr(III), Mn(III), Fe(III), and Cu(II)) towards C-H bond activation reaction are presented. These superoxo species generated by oxygen activation are found to be aggressive oxidants compared to their high-valent metal-oxo counterparts generated by O⋅⋅⋅O bond cleavage. Our calculations illustrate the superior oxidative abilities of Fe(III)- and Mn(III)-superoxo species compared to the others and suggest that the reactivity may be correlated to the magnetic exchange parameter.

  4. Rh(III)-Catalyzed C-H Bond Addition/Amine-Mediated Cyclization of Bis-Michael Acceptors.

    PubMed

    Potter, Tyler J; Ellman, Jonathan A

    2016-08-01

    A Rh(III)-catalyzed C-H bond addition/primary amine-promoted cyclization of bis-Michael acceptors is reported. The C-H bond addition step occurs with high chemoselectivity, and the subsequent intramolecular Michael addition, mediated by a primary amine catalyst, sets three contiguous stereocenters with high diastereoselectivity. A broad range of directing groups and both aromatic and alkenyl C-H bonds were shown to be effective in this transformation, affording functionalized piperidines, tetrahydropyrans, and cyclohexanes.

  5. Enantioselective functionalization of allylic C-H bonds following a strategy of functionalization and diversification.

    PubMed

    Sharma, Ankit; Hartwig, John F

    2013-11-27

    We report the enantioselective functionalization of allylic C-H bonds in terminal alkenes by a strategy involving the installation of a temporary functional group at the terminal carbon atom by C-H bond functionalization, followed by the catalytic diversification of this intermediate with a broad scope of reagents. The method consists of a one-pot sequence of palladium-catalyzed allylic C-H bond oxidation under neutral conditions to form linear allyl benzoates, followed by iridium-catalyzed allylic substitution. This overall transformation forms a variety of chiral products containing a new C-N, C-O, C-S, or C-C bond at the allylic position in good yield with a high branched-to-linear selectivity and excellent enantioselectivity (ee ≤97%). The broad scope of the overall process results from separating the oxidation and functionalization steps; by doing so, the scope of nucleophile encompasses those sensitive to direct oxidative functionalization. The high enantioselectivity of the overall process is achieved by developing an allylic oxidation that occurs without acid to form the linear isomer with high selectivity. These allylic functionalization processes are amenable to an iterative sequence leading to (1,n)-functionalized products with catalyst-controlled diastereo- and enantioselectivity. The utility of the method in the synthesis of biologically active molecules has been demonstrated.

  6. C-H\\ctdot O hydrogen bonding in a 4-fluorobenzoate multilayer induced by silver nanoparticles

    NASA Astrophysics Data System (ADS)

    Perry, Donald A.; Schiefer, Elizabeth M.; Cordova, James S.; Bonde, Ashley M.; Razer, Taylor M.; Primm, Katherine M.; Chen, Tsung Yen; Biris, Alexandru S.

    2011-08-01

    SERS, SEIRA, and DFT calculations showed silver nanoparticles can stimulate C-H⋯O hydrogen bonding in 4-fluorobenzoate ion/ n-heptane multilayers. SERS/DFT demonstrated that 4-fluorobenzoic acid (4FBA) adsorbed as a 4-fluorobenzoate (4FBT) monolayer on nanosilver. Ionization of 4FBA to 4FBT occurred in the multilayer when 4FBA was deposited in n-heptane onto nanosilver. Frequency shifts in SEIRA bands of 4FBT COO stretch and n-heptane CH bend modes illustrated a change in the degree of C-H⋯O hydrogen bonding as more 4FBT/ n-heptane was adsorbed to the multilayer. This work will influence many research areas such as sensors formed from thin organic layers on metal nanoparticles.

  7. Theoretical study of the C-H bond dissociation energy of C2H

    NASA Technical Reports Server (NTRS)

    Bauschlicher, Charles W., Jr.; Langhoff, Stephen R.

    1990-01-01

    A theoretical study of the convergence of the C-H bond dissociation energy D(0) in C2H with respect to both the one- and n-particle spaces is presented. The calculated C-H bond energies of C2H2 and C2H4, which are in excellent agreement with experiment, are used for calibration. The best estimate for D(0) of 112.4 + or - 2.0 kcal/mol is slightly below the recent experimental value of 116.3 + or - 2.6 kcal/mol, but substantially above a previous theoretical estimate of 102 kcal/mol. The remaining discrepancy with experiment may reflect primarily the uncertainty in the experimental D(0) value of C2 required in the analysis.

  8. Copper-catalyzed oxaziridine-mediated oxidation of C-H bonds.

    PubMed

    Motiwala, Hashim F; Gülgeze, Belgin; Aubé, Jeffrey

    2012-08-17

    The highly regio- and chemoselective oxidation of activated C-H bonds has been observed via copper-catalyzed reactions of oxaziridines. The oxidation proceeded with a variety of substrates, primarily comprising allylic and benzylic examples, as well as one example of an otherwise unactivated tertiary C-H bond. The mechanism of the reaction is proposed to involve single-electron transfer to the oxaziridines to generate a copper-bound radical anion, followed by hydrogen atom abstraction and collapse to products, with regeneration of the catalyst by a final single-electron transfer event. The involvement of allylic radical intermediates was supported by a radical-trapping experiment with TEMPO. PMID:22830300

  9. Activation of C-H and B-H bonds through agostic bonding: an ELF/QTAIM insight.

    PubMed

    Zins, Emilie-Laure; Silvi, Bernard; Alikhani, M Esmaïl

    2015-04-14

    Agostic bonding is of paramount importance in C-H bond activation processes. The reactivity of the σ C-H bond thus activated will depend on the nature of the metallic center, the nature of the ligand involved in the interaction and co-ligands, as well as on geometric parameters. Because of their importance in organometallic chemistry, a qualitative classification of agostic bonding could be very much helpful. Herein we propose descriptors of the agostic character of bonding based on the electron localization function (ELF) and Quantum Theory of Atoms in Molecules (QTAIM) topological analysis. A set of 31 metallic complexes taken, or derived, from the literature was chosen to illustrate our methodology. First, some criteria should prove that an interaction between a metallic center and a σ X-H bond can indeed be described as "agostic" bonding. Then, the contribution of the metallic center in the protonated agostic basin, in the ELF topological description, may be used to evaluate the agostic character of bonding. A σ X-H bond is in agostic interaction with a metal center when the protonated X-H basin is a trisynaptic basin with a metal contribution strictly larger than the numerical uncertainty, i.e. 0.01 e. In addition, it was shown that the weakening of the electron density at the X-Hagostic bond critical point with respect to that of X-Hfree well correlates with the lengthening of the agostic X-H bond distance as well as with the shift of the vibrational frequency associated with the νX-H stretching mode. Furthermore, the use of a normalized parameter that takes into account the total population of the protonated basin, allows the comparison of the agostic character of bonding involved in different complexes. PMID:25760795

  10. Boron-Catalyzed Aromatic C-H Bond Silylation with Hydrosilanes.

    PubMed

    Ma, Yuanhong; Wang, Baoli; Zhang, Liang; Hou, Zhaomin

    2016-03-23

    Metal-free catalytic C-H silylation of a series of aromatic compounds such as N,N-disubstituted anilines with various hydrosilanes has been achieved for the first time using commercially available B(C6F5)3 as a catalyst. This protocol features simple and neutral reaction conditions, high regioselectivity, wide substrate scope (up to 40 examples), Si-Cl bond compatibility, and no requirement for a hydrogen acceptor. PMID:26959863

  11. Asymmetric Intramolecular Alkylation of Chiral Aromatic Imines via Catalytic C-H Bond Activation

    SciTech Connect

    Watzke, Anja; Wilson, Rebecca; O'Malley, Steven; Bergman, Robert; Ellman, Jonathan

    2007-04-16

    The asymmetric intramolecular alkylation of chiral aromatic aldimines, in which differentially substituted alkenes are tethered meta to the imine, was investigated. High enantioselectivities were obtained for imines prepared from aminoindane derivatives, which function as directing groups for the rhodium-catalyzed C-H bond activation. Initial demonstration of catalytic asymmetric intramolecular alkylation also was achieved by employing a sterically hindered achiral imine substrate and catalytic amounts of a chiral amine.

  12. Theoretical study of the C-H bond dissociation energy of acetylene

    NASA Technical Reports Server (NTRS)

    Taylor, Peter R.; Bauschlicher, Charles W., Jr.; Langhoff, Stephen R.

    1990-01-01

    The authors present a theoretical study of the convergence of the C-H bond dissociation energy (D sub o) of acetylene with respect to both the one- and n-particle spaces. Their best estimate for D sub o of 130.1 plus or minus 1.0 kcal/mole is slightly below previous theoretical estimates, but substantially above the value determined using Stark anticrossing spectroscopy that is asserted to be an upper bound.

  13. Direct Oxidation of Aliphatic C-H Bonds in Amino-Containing Molecules under Transition-Metal-Free Conditions.

    PubMed

    Li, Xin; Che, Xing; Chen, Gui-Hua; Zhang, Jun; Yan, Jia-Lei; Zhang, Yun-Fei; Zhang, Li-Sheng; Hsu, Chao-Ping; Gao, Yi Qin; Shi, Zhang-Jie

    2016-03-18

    By employing a simple, inexpensive, and transition-metal-free oxidation system, secondary C-H bonds in a series of phthaloyl protected primary amines and amino acid derivatives were oxidized to carbonyls with good regioselectivities. This method could also be applied to oxidize tertiary C-H bonds and modify synthetic dipeptides.

  14. Synthesis of new class of alkyl azarene pyridinium zwitterions via iodine mediated sp3 C-H bond activation.

    PubMed

    Kumar, Atul; Gupta, Garima; Srivastava, Suman

    2011-12-16

    An efficient and conceptually different approach toward C-H bond activation by using iodine mediated sp(3) C-H functionalization for the synthesis of alkyl azaarene pyridinium zwitterions is described. This work has the interesting distinction of being the first synthesis of a new class of alkyl azaarene pyridinium zwitterion via transition-metal-free sp(3) C-H bond activation of an alkyl azaarene.

  15. Transition-Metal-Catalyzed Direct Addition of Aryl C-H Bonds to Unsaturated Electrophiles.

    PubMed

    Shi, Xian-Ying; Han, Wen-Jing; Li, Chao-Jun

    2016-06-01

    The direct addition of Csp(2) -H bonds onto polar C=C, C=O, and C=N bonds is both synthetically and mechanistically important, because using aromatic C-H substrates in place of organometallic reagents provides a more direct and atom-economical alternative to many important compounds without the pre-generation of organometallic compounds from stoichiometric halides and the unavoidable generation of stoichiometric metal halide waste. In this account, we summarize our contributions to the transition-metal-catalyzed addition of aromatic C-H bonds to polar C=C, C=O, and C=N bonds via directing-group-assisted regiospecific reactions. These synthetic methods provide efficient access to benzylic alcohols, alkylbenzenes, 3-substituted phthalides, N-substituted phthalimides, N-aryl benzamides, and indene derivatives from commercially available reagents. It is worth noting that valuable heterocycles such as 3-substituted phthalides and N-substituted phthalimides can be obtained in one step by this approach. PMID:27059538

  16. Inserting CO2 into Aryl C-H Bonds of Metal-Organic Frameworks: CO2 Utilization for Direct Heterogeneous C-H Activation.

    PubMed

    Gao, Wen-Yang; Wu, Haifan; Leng, Kunyue; Sun, Yinyong; Ma, Shengqian

    2016-04-25

    Described for the first time is that carbon dioxide (CO2 ) can be successfully inserted into aryl C-H bonds of the backbone of a metal-organic framework (MOF) to generate free carboxylate groups, which serve as Brønsted acid sites for efficiently catalyzing the methanolysis of epoxides. The work delineates the very first example of utilizing CO2 for heterogeneous C-H activation and carboxylation reactions on MOFs, and opens a new avenue for CO2 chemical transformations under mild reaction conditions.

  17. Modification of purine and pyrimidine nucleosides by direct C-H bond activation.

    PubMed

    Liang, Yong; Wnuk, Stanislaw F

    2015-03-17

    Transition metal-catalyzed modifications of the activated heterocyclic bases of nucleosides as well as DNA or RNA fragments employing traditional cross-coupling methods have been well-established in nucleic acid chemistry. This review covers advances in the area of cross-coupling reactions in which nucleosides are functionalized via direct activation of the C8-H bond in purine and the C5-H or C6-H bond in uracil bases. The review focuses on Pd/Cu-catalyzed couplings between unactivated nucleoside bases with aryl halides. It also discusses cross-dehydrogenative arylations and alkenylations as well as other reactions used for modification of nucleoside bases that avoid the use of organometallic precursors and involve direct C-H bond activation in at least one substrate. The scope and efficiency of these coupling reactions along with some mechanistic considerations are discussed.

  18. Triiodide-Mediated δ-Amination of Secondary C-H Bonds.

    PubMed

    Wappes, Ethan A; Fosu, Stacy C; Chopko, Trevor C; Nagib, David A

    2016-08-16

    The Cδ -H amination of unactivated, secondary C-H bonds to form a broad range of functionalized pyrrolidines has been developed by a triiodide (I3 (-) )-mediated strategy. By in situ 1) oxidation of sodium iodide and 2) sequestration of the transiently generated iodine (I2 ) as I3 (-) , this approach precludes undesired I2 -mediated decomposition which can otherwise limit synthetic utility to only weak C(sp(3) )-H bonds. The mechanism of this triiodide-mediated cyclization of unbiased, secondary C(sp(3) )-H bonds, by either thermal or photolytic initiation, is supported by NMR and UV/Vis data, as well as intercepted intermediates. PMID:27384522

  19. Transition-metal-catalyzed direct arylation of (hetero)arenes by C-H bond cleavage.

    PubMed

    Ackermann, Lutz; Vicente, Rubén; Kapdi, Anant R

    2009-01-01

    The area of transition-metal-catalyzed direct arylation through cleavage of C-H bonds has undergone rapid development in recent years, and is becoming an increasingly viable alternative to traditional cross-coupling reactions with organometallic reagents. In particular, palladium and ruthenium catalysts have been described that enable the direct arylation of (hetero)arenes with challenging coupling partners--including electrophilic aryl chlorides and tosylates as well as simple arenes in cross-dehydrogenative arylations. Furthermore, less expensive copper, iron, and nickel complexes were recently shown to be effective for economically attractive direct arylations.

  20. Annulation of aromatic imines via directed C-H bond activation.

    PubMed

    Thalji, Reema K; Ahrendt, Kateri A; Bergman, Robert G; Ellman, Jonathan A

    2005-08-19

    A directed C-H bond activation approach to the synthesis of indans, tetralins, dihydrofurans, dihydroindoles, and other polycyclic aromatic compounds is presented. Cyclization of aromatic ketimines and aldimines containing alkenyl groups tethered at the meta position relative to the imine directing group has been achieved using (PPh3)3RhCl (Wilkinson's catalyst). The cyclization of a range of aromatic ketimines and aldimines provides bi- and tricyclic ring systems with good regioselectivity. Different ring sizes and substitution patterns can be accessed through the coupling of monosubstituted, 1,1- or 1,2-disubstituted, and trisubstituted alkenes bearing both electron-rich and electron-deficient functionality.

  1. Selective molecular recognition, C-H bond activation, and catalysis in nanoscale reaction vessels

    SciTech Connect

    Fiedler, Dorothea; Leung, Dennis H.; Raymond, Kenneth N.; Bergman, Robert G.

    2004-11-27

    Supramolecular chemistry represents a way to mimic enzyme reactivity by using specially designed container molecules. We have shown that a chiral self-assembled M{sub 4}L{sub 6} supramolecular tetrahedron can encapsulate a variety of cationic guests, with varying degrees of stereoselectivity. Reactive iridium guests can be encapsulated and the C-H bond activation of aldehydes occurs, with the host cavity controlling the ability of substrates to interact with the metal center based upon size and shape. In addition, the host container can act as a catalyst by itself. By restricting reaction space and preorganizing the substrates into reactive conformations, it accelerates the sigmatropic rearrangement of enammonium cations.

  2. Equilibrium Acidities and Homolytic Bond Dissociation Energies of Acidic C H Bonds in Alpha-Arylacetophenones and Related Compounds

    SciTech Connect

    Alnajjar, Mikhail S. ); Zhang, Xian-Man; Gleicher, Gerald J.; Truksa, Scott V.; Franz, James A. )

    2002-12-13

    The equilibrium acidities (pKAHs) and the oxidation potentials of the conjugate anions (Eox(A?{approx})s) were determined in dimethyl sulfoxide (DMSO) for eight ketones of the structure GCOCH3 and twenty of the structure RCOCH2G, (where R= alkyl, phenyl and G= alkyl, aryl). The homolytic bond dissociation energies (BDEs) for the acidic C H bonds of the ketones were estimated using the equation, BDEAH= 1.37pKAH+ 23.1Eox(A?{approx})+ 73.3. While the equilibrium acidities of GCOCH3 were found to be dependent on the remote substituent G, the BDE values for the C H bonds remained essentially invariant (93.5+ 0.5 kcal/mol). A linear correlation between pKAH values and (Eox(A?{approx})s) was found for the ketones. For RCOCH2G ketones, both pKAH and BDE values for the adjacent C-H bonds are sensitive to the nature of the substituent G. However, the steric bulk of the aryl group tends to exert a leveling effect on BDE's. The BDE of?p-9-anthracenylacetophenone is higher than that of??-2-anthracenylacetophenone by 3 kcal/mole, reflecting significant steric inhibition of resonance in the 9-substituted system. A range of 80.7 - 84.4 kcal/mole is observed for RCOCH2G ketones. The results are discussed in terms of solvation, steric, and resonance effects. Ab initio density functional theory (DFT) calculations are employed to illustrate the effect of steric interactions on radical and anion geometries. The DFT results parallel the trends in the experimental BDEs of??-arylacetophenones.

  3. A theoretical view on CrO2+-mediated C-H bond activation in ethane

    NASA Astrophysics Data System (ADS)

    Tong, YongChun; Zhang, XiaoYong; Wang, QingYun; Xu, XinJian; Wang, YongCheng

    2015-06-01

    The gas-phase reaction of C-H bond activation in ethane by CrO2+ has been investigated using density functional theory (DFT) at the UB3LYP/6-311G(2d,p) level. Our results reveal that the activation process is actually a spin-forbidden reaction. The involved crossing point between the doublet and quartet potential energy surfaces (PES) has been discussed by two well-known methods, i.e., intrinsic reaction coordinate (IRC) approach for crossing point (CP) and Harvey's algorithm for minimum energy crossing point (MECP). The obtained single ( P1ISC = 2.48 × 10-3) and double ( P1ISC = 4.95 × 10-3) passes estimated at MECP show that the intersystem crossing (ISC) occurs with a little probability. The C-H bond activation processes should proceed to be endothermic by 73.16 kJ/mol on the doublet surface without any spin change.

  4. C-H Bond Activation by Early Transition Metal Carbide Cluster Anion MoC3 (-).

    PubMed

    Li, Zi-Yu; Hu, Lianrui; Liu, Qing-Yu; Ning, Chuan-Gang; Chen, Hui; He, Sheng-Gui; Yao, Jiannian

    2015-12-01

    Although early transition metal (ETM) carbides can activate CH bonds in condensed-phase systems, the electronic-level mechanism is unclear. Atomic clusters are ideal model systems for understanding the mechanisms of bond activation. For the first time, CH activation of a simple alkane (ethane) by an ETM carbide cluster anion (MoC3 (-) ) under thermal-collision conditions has been identified by using high-resolution mass spectrometry, photoelectron imaging spectroscopy, and high-level quantum chemical calculations. Dehydrogenation and ethene elimination were observed in the reaction of MoC3 (-) with C2 H6 . The CH activation follows a mechanism of oxidative addition that is much more favorable in the carbon-stabilized low-spin ground electronic state than in the high-spin excited state. The reaction efficiency between the MoC3 (-) anion and C2 H6 is low (0.23±0.05) %. A comparison between the anionic and a highly efficient cationic reaction system (Pt(+) +C2 H6 ) was made. It turned out that the potential-energy surfaces for the entrance channels of the anionic and cationic reaction systems can be very different. PMID:26490554

  5. The fifth overtones of the C-H stretching vibrations and the bond lengths in some heterocyclic compounds

    NASA Astrophysics Data System (ADS)

    Mizugai, Yoshihiro; Katayama, Mikio

    1980-07-01

    The fifth overtones of the C-H stretching vibrations of pyridine, pyrazine, thiophene, 3-methylthiophene, furan and pyrrole in the liquid state have been observed by a thermal lens technique. It was found that their frequency shifts from that of benzene are proportional to the decrease in the relevant C-H bond length.

  6. Palladium-catalyzed oxidative arylalkylation of activated alkenes: dual C-H bond cleavage of an arene and acetonitrile.

    PubMed

    Wu, Tao; Mu, Xin; Liu, Guosheng

    2011-12-23

    Not one but two: The title reaction proceeds through the dual C-H bond cleavage of both aniline and acetonitrile. The reaction affords a variety of cyano-bearing indolinones in excellent yield. Mechanistic studies demonstrate that this reaction involves a fast arylation of the olefin and a rate-determining C-H activation of the acetonitrile.

  7. Native functionality in triple catalytic cross-coupling: sp³ C-H bonds as latent nucleophiles.

    PubMed

    Shaw, Megan H; Shurtleff, Valerie W; Terrett, Jack A; Cuthbertson, James D; MacMillan, David W C

    2016-06-10

    The use of sp(3) C-H bonds--which are ubiquitous in organic molecules--as latent nucleophile equivalents for transition metal-catalyzed cross-coupling reactions has the potential to substantially streamline synthetic efforts in organic chemistry while bypassing substrate activation steps. Through the combination of photoredox-mediated hydrogen atom transfer (HAT) and nickel catalysis, we have developed a highly selective and general C-H arylation protocol that activates a wide array of C-H bonds as native functional handles for cross-coupling. This mild approach takes advantage of a tunable HAT catalyst that exhibits predictable reactivity patterns based on enthalpic and bond polarity considerations to selectively functionalize α-amino and α-oxy sp(3) C-H bonds in both cyclic and acyclic systems.

  8. Native functionality in triple catalytic cross-coupling: sp³ C-H bonds as latent nucleophiles.

    PubMed

    Shaw, Megan H; Shurtleff, Valerie W; Terrett, Jack A; Cuthbertson, James D; MacMillan, David W C

    2016-06-10

    The use of sp(3) C-H bonds--which are ubiquitous in organic molecules--as latent nucleophile equivalents for transition metal-catalyzed cross-coupling reactions has the potential to substantially streamline synthetic efforts in organic chemistry while bypassing substrate activation steps. Through the combination of photoredox-mediated hydrogen atom transfer (HAT) and nickel catalysis, we have developed a highly selective and general C-H arylation protocol that activates a wide array of C-H bonds as native functional handles for cross-coupling. This mild approach takes advantage of a tunable HAT catalyst that exhibits predictable reactivity patterns based on enthalpic and bond polarity considerations to selectively functionalize α-amino and α-oxy sp(3) C-H bonds in both cyclic and acyclic systems. PMID:27127237

  9. Silylation of C-H bonds in aromatic heterocycles by an Earth-abundant metal catalyst

    NASA Astrophysics Data System (ADS)

    Toutov, Anton A.; Liu, Wen-Bo; Betz, Kerry N.; Fedorov, Alexey; Stoltz, Brian M.; Grubbs, Robert H.

    2015-02-01

    Heteroaromatic compounds containing carbon-silicon (C-Si) bonds are of great interest in the fields of organic electronics and photonics, drug discovery, nuclear medicine and complex molecule synthesis, because these compounds have very useful physicochemical properties. Many of the methods now used to construct heteroaromatic C-Si bonds involve stoichiometric reactions between heteroaryl organometallic species and silicon electrophiles or direct, transition-metal-catalysed intermolecular carbon-hydrogen (C-H) silylation using rhodium or iridium complexes in the presence of excess hydrogen acceptors. Both approaches are useful, but their limitations include functional group incompatibility, narrow scope of application, high cost and low availability of the catalysts, and unproven scalability. For this reason, a new and general catalytic approach to heteroaromatic C-Si bond construction that avoids such limitations is highly desirable. Here we report an example of cross-dehydrogenative heteroaromatic C-H functionalization catalysed by an Earth-abundant alkali metal species. We found that readily available and inexpensive potassium tert-butoxide catalyses the direct silylation of aromatic heterocycles with hydrosilanes, furnishing heteroarylsilanes in a single step. The silylation proceeds under mild conditions, in the absence of hydrogen acceptors, ligands or additives, and is scalable to greater than 100 grams under optionally solvent-free conditions. Substrate classes that are difficult to activate with precious metal catalysts are silylated in good yield and with excellent regioselectivity. The derived heteroarylsilane products readily engage in versatile transformations enabling new synthetic strategies for heteroaromatic elaboration, and are useful in their own right in pharmaceutical and materials science applications.

  10. Toluene derivatives as simple coupling precursors for cascade palladium-catalyzed oxidative C-H bond acylation of acetanilides.

    PubMed

    Wu, Yinuo; Choy, Pui Ying; Mao, Fei; Kwong, Fuk Yee

    2013-01-25

    A palladium-catalyzed cascade cross-coupling of acetanilide and toluene for the synthesis of ortho-acylacetanilide is described. Toluene derivatives can act as effective acyl precursors (upon sp(3)-C-H bond oxidation by a Pd/TBHP system) in the oxidative coupling between two C-H bonds. This dehydrogenative Pd-catalyzed ortho-acylation proceeds under mild reaction conditions. PMID:23230572

  11. Olefin cis-Dihydroxylation and Aliphatic C-H Bond Oxygenation by a Dioxygen-Derived Electrophilic Iron-Oxygen Oxidant.

    PubMed

    Chatterjee, Sayanti; Paine, Tapan Kanti

    2015-08-01

    Many iron-containing enzymes involve metal-oxygen oxidants to carry out O2-dependent transformation reactions. However, the selective oxidation of C-H and C=C bonds by biomimetic complexes using O2 remains a major challenge in bioinspired catalysis. The reactivity of iron-oxygen oxidants generated from an Fe(II)-benzilate complex of a facial N3 ligand were thus investigated. The complex reacted with O2 to form a nucleophilic oxidant, whereas an electrophilic oxidant, intercepted by external substrates, was generated in the presence of a Lewis acid. Based on the mechanistic studies, a nucleophilic Fe(II)-hydroperoxo species is proposed to form from the benzilate complex, which undergoes heterolytic O-O bond cleavage in the presence of a Lewis acid to generate an Fe(IV)-oxo-hydroxo oxidant. The electrophilic iron-oxygen oxidant selectively oxidizes sulfides to sulfoxides, alkenes to cis-diols, and it hydroxylates the C-H bonds of alkanes, including that of cyclohexane.

  12. Enzymatic hydroxylation of an unactivated methylene C-H bond guided by molecular dynamics simulations

    NASA Astrophysics Data System (ADS)

    Narayan, Alison R. H.; Jiménez-Osés, Gonzalo; Liu, Peng; Negretti, Solymar; Zhao, Wanxiang; Gilbert, Michael M.; Ramabhadran, Raghunath O.; Yang, Yun-Fang; Furan, Lawrence R.; Li, Zhe; Podust, Larissa M.; Montgomery, John; Houk, K. N.; Sherman, David H.

    2015-08-01

    The hallmark of enzymes from secondary metabolic pathways is the pairing of powerful reactivity with exquisite site selectivity. The application of these biocatalytic tools in organic synthesis, however, remains under-utilized due to limitations in substrate scope and scalability. Here, we report how the reactivity of a monooxygenase (PikC) from the pikromycin pathway is modified through computationally guided protein and substrate engineering, and applied to the oxidation of unactivated methylene C-H bonds. Molecular dynamics and quantum mechanical calculations were used to develop a predictive model for substrate scope, site selectivity and stereoselectivity of PikC-mediated C-H oxidation. A suite of menthol derivatives was screened computationally and evaluated through in vitro reactions, where each substrate adhered to the predicted models for selectivity and conversion to product. This platform was also expanded beyond menthol-based substrates to the selective hydroxylation of a variety of substrate cores ranging from cyclic to fused bicyclic and bridged bicyclic compounds.

  13. Direct Functionalization of Nitrogen Heterocycles via Rh-Catalyzed C-H Bond Activation

    SciTech Connect

    Lewis, Jared; Bergman, Robert; Ellman, Jonathan

    2008-02-04

    Nitrogen heterocycles are present in many compounds of enormous practical importance, ranging from pharmaceutical agents and biological probes to electroactive materials. Direct funtionalization of nitrogen heterocycles through C-H bond activation constitutes a powerful means of regioselectively introducing a variety of substituents with diverse functional groups onto the heterocycle scaffold. Working together, our two groups have developed a family of Rh-catalyzed heterocycle alkylation and arylation reactions that are notable for their high level of functional-group compatibility. This Account describes their work in this area, emphasizing the relevant mechanistic insights that enabled synthetic advances and distinguished the resulting transformations from other methods. They initially discovered an intramolecular Rh-catalyzed C-2-alkylation of azoles by alkenyl groups. That reaction provided access to a number of di-, tri-, and tetracyclic azole derivatives. They then developed conditions that exploited microwave heating to expedite these reactions. While investigating the mechanism of this transformation, they discovered that a novel substrate-derived Rh-N-heterocyclic carbene (NHC) complex was involved as an intermediate. They then synthesized analogous Rh-NHC complexes directly by treating precursors to the intermediate [RhCl(PCy{sub 3}){sub 2}] with N-methylbenzimidazole, 3-methyl-3,4-dihydroquinazolein, and 1-methyl-1,4-benzodiazepine-2-one. Extensive kinetic analysis and DFT calculations supported a mechanism for carbene formation in which the catalytically active RhCl(PCy{sub 3}){sub 2} fragment coordinates to the heterocycle before intramolecular activation of the C-H bond occurs. The resulting Rh-H intermediate ultimately tautomerizes to the observed carbene complex. With this mechanistic information and the discovery that acid co-catalysts accelerate the alkylation, they developed conditions that efficiently and intermolecularly alkylate a variety of

  14. Direct functionalization of nitrogen heterocycles via Rh-catalyzed C-H bond activation.

    PubMed

    Lewis, Jared C; Bergman, Robert G; Ellman, Jonathan A

    2008-08-01

    [Reaction: see text]. Nitrogen heterocycles are present in many compounds of enormous practical importance, ranging from pharmaceutical agents and biological probes to electroactive materials. Direct functionalization of nitrogen heterocycles through C-H bond activation constitutes a powerful means of regioselectively introducing a variety of substituents with diverse functional groups onto the heterocycle scaffold. Working together, our two groups have developed a family of Rh-catalyzed heterocycle alkylation and arylation reactions that are notable for their high level of functional-group compatibility. This Account describes our work in this area, emphasizing the relevant mechanistic insights that enabled synthetic advances and distinguished the resulting transformations from other methods. We initially discovered an intramolecular Rh-catalyzed C-2 alkylation of azoles by alkenyl groups. That reaction provided access to a number of di-, tri-, and tetracyclic azole derivatives. We then developed conditions that exploited microwave heating to expedite these reactions. While investigating the mechanism of this transformation, we discovered that a novel substrate-derived Rh- N-heterocyclic carbene (NHC) complex was involved as an intermediate. We then synthesized analogous Rh-NHC complexes directly by treating precursors to the intermediate [RhCl(PCy 3)2] with N-methylbenzimidazole, 3-methyl-3,4-dihydroquinazoline, and 1-methyl-1,4-benzodiazepine-2-one. Extensive kinetic analysis and DFT calculations supported a mechanism for carbene formation in which the catalytically active RhCl(PCy 3) 2 fragment coordinates to the heterocycle before intramolecular activation of the C-H bond occurs. The resulting Rh-H intermediate ultimately tautomerizes to the observed carbene complex. With this mechanistic information and the discovery that acid cocatalysts accelerate the alkylation, we developed conditions that efficiently and intermolecularly alkylate a variety of

  15. At least 10% shorter C-H bonds in cryogenic protein crystal structures than in current AMBER forcefields.

    PubMed

    Pang, Yuan-Ping

    2015-03-01

    High resolution protein crystal structures resolved with X-ray diffraction data at cryogenic temperature are commonly used as experimental data to refine forcefields and evaluate protein folding simulations. However, it has been unclear hitherto whether the C-H bond lengths in cryogenic protein structures are significantly different from those defined in forcefields to affect protein folding simulations. This article reports the finding that the C-H bonds in high resolution cryogenic protein structures are 10-14% shorter than those defined in current AMBER forcefields, according to 3709 C-H bonds in the cryogenic protein structures with resolutions of 0.62-0.79 Å. Also, 20 all-atom, isothermal-isobaric, 0.5-μs molecular dynamics simulations showed that chignolin folded from a fully-extended backbone formation to the native β-hairpin conformation in the simulations using AMBER forcefield FF12SB at 300 K with an aggregated native state population including standard error of 10 ± 4%. However, the aggregated native state population with standard error reduced to 3 ± 2% in the same simulations except that C-H bonds were shortened by 10-14%. Furthermore, the aggregated native state populations with standard errors increased to 35 ± 3% and 26 ± 3% when using FF12MC, which is based on AMBER forcefield FF99, with and without the shortened C-H bonds, respectively. These results show that the 10-14% bond length differences can significantly affect protein folding simulations and suggest that re-parameterization of C-H bonds according to the cryogenic structures could improve the ability of a forcefield to fold proteins in molecular dynamics simulations.

  16. Consequences of metal-oxide interconversion for C-H bond activation during CH4 reactions on Pd catalysts.

    PubMed

    Chin, Ya-Huei Cathy; Buda, Corneliu; Neurock, Matthew; Iglesia, Enrique

    2013-10-16

    Mechanistic assessments based on kinetic and isotopic methods combined with density functional theory are used to probe the diverse pathways by which C-H bonds in CH4 react on bare Pd clusters, Pd cluster surfaces saturated with chemisorbed oxygen (O*), and PdO clusters. C-H activation routes change from oxidative addition to H-abstraction and then to σ-bond metathesis with increasing O-content, as active sites evolve from metal atom pairs (*-*) to oxygen atom (O*-O*) pairs and ultimately to Pd cation-lattice oxygen pairs (Pd(2+)-O(2-)) in PdO. The charges in the CH3 and H moieties along the reaction coordinate depend on the accessibility and chemical state of the Pd and O centers involved. Homolytic C-H dissociation prevails on bare (*-*) and O*-covered surfaces (O*-O*), while C-H bonds cleave heterolytically on Pd(2+)-O(2-) pairs at PdO surfaces. On bare surfaces, C-H bonds cleave via oxidative addition, involving Pd atom insertion into the C-H bond with electron backdonation from Pd to C-H antibonding states and the formation of tight three-center (H3C···Pd···H)(‡) transition states. On O*-saturated Pd surfaces, C-H bonds cleave homolytically on O*-O* pairs to form radical-like CH3 species and nearly formed O-H bonds at a transition state (O*···CH3(•)···*OH)(‡) that is looser and higher in enthalpy than on bare Pd surfaces. On PdO surfaces, site pairs consisting of exposed Pd(2+) and vicinal O(2-), Pd(ox)-O(ox), cleave C-H bonds heterolytically via σ-bond metathesis, with Pd(2+) adding to the C-H bond, while O(2-) abstracts the H-atom to form a four-center (H3C(δ-)···Pd(ox)···H(δ+)···O(ox))(‡) transition state without detectable Pd(ox) reduction. The latter is much more stable than transition states on *-* and O*-O* pairs and give rise to a large increase in CH4 oxidation turnover rates at oxygen chemical potentials leading to Pd to PdO transitions. These distinct mechanistic pathways for C-H bond activation, inferred from theory

  17. Mechanochemical C-H bond activation: rapid and regioselective double cyclopalladation monitored by in situ Raman spectroscopy.

    PubMed

    Juribašić, Marina; Užarević, Krunoslav; Gracin, Davor; Ćurić, Manda

    2014-09-14

    The first direct mechanochemical transition-metal-mediated activation of strong phenyl C-H bonds is reported. The mechanochemical procedure, resulting in cyclopalladated complexes, is quantitative and significantly faster than solution synthesis and allows highly regioselective activation of two C-H bonds by palladium(II) acetate in asymmetrically substituted azobenzene. Milling is monitored by in situ solid-state Raman spectroscopy which in combination with quantum-chemical calculations enabled characterization of involved reaction species, direct insight into the dynamics and reaction pathways, as well as the optimization of a milling process.

  18. B-H, C-H, and B-C bond activation: the role of two adjacent agostic interactions.

    PubMed

    Cassen, Audrey; Gloaguen, Yann; Vendier, Laure; Duhayon, Carine; Poblador-Bahamonde, Amalia; Raynaud, Christophe; Clot, Eric; Alcaraz, Gilles; Sabo-Etienne, Sylviane

    2014-07-14

    Tuning the nature of the linker in a L~BHR phosphinoborane compound led to the isolation of a ruthenium complex stabilized by two adjacent, δ-C-H and ε-B(sp2)-H, agostic interactions. Such a unique coordination mode stabilizes a 14-electron "RuH2P2" fragment through connected σ-bonds of different polarity, and affords selective B-H, C-H, and B-C bond activation as illustrated by reactivity studies with H2 and boranes. PMID:24990456

  19. Photocatalytic benzylic C-H bond oxidation with a flavin scandium complex.

    PubMed

    Mühldorf, Bernd; Wolf, Robert

    2015-05-18

    The enhanced reduction potential of riboflavin tetraacetate coordinating to scandium triflate enables the challenging photocatalytic C-H oxidation of electron-deficient alkylbenzenes and benzyl alcohols.

  20. Metal-catalyzed C-C bond cleavage in alkanes: effects of methyl substitution on transition-state structures and stability.

    PubMed

    Flaherty, David W; Hibbitts, David D; Iglesia, Enrique

    2014-07-01

    Methyl substituents at C-C bonds influence hydrogenolysis rates and selectivities of acyclic and cyclic C2-C8 alkanes on Ir, Rh, Ru, and Pt catalysts. C-C cleavage transition states form via equilibrated dehydrogenation steps that replace several C-H bonds with C-metal bonds, desorb H atoms (H*) from saturated surfaces, and form λ H2(g) molecules. Activation enthalpies (ΔH(‡)) and entropies (ΔS(‡)) and λ values for (3)C-(x)C cleavage are larger than for (2)C-(2)C or (2)C-(1)C bonds, irrespective of the composition of metal clusters or the cyclic/acyclic structure of the reactants. (3)C-(x)C bonds cleave through α,β,γ- or α,β,γ,δ-bound transition states, as indicated by the agreement between measured activation entropies and those estimated for such structures using statistical mechanics. In contrast, less substituted C-C bonds involve α,β-bound species with each C atom bound to several surface atoms. These α,β configurations weaken C-C bonds through back-donation to antibonding orbitals, but such configurations cannot form with (3)C atoms, which have one C-H bond and thus can form only one C-M bond. (3)C-(x)C cleavage involves attachment of other C atoms, which requires endothermic C-H activation and H* desorption steps that lead to larger ΔH(‡) values but also larger ΔS(‡) values (by forming more H2(g)) than for (2)C-(2)C and (2)C-(1)C bonds, irrespective of alkane size (C2-C8) or cyclic/acyclic structure. These data and their mechanistic interpretation indicate that low temperatures and high H2 pressures favor cleavage of less substituted C-C bonds and form more highly branched products from cyclic and acyclic alkanes. Such interpretations and catalytic consequences of substitution seem also relevant to C-X cleavage (X = S, N, O) in desulfurization, denitrogenation, and deoxygenation reactions.

  1. Asymmetric Synthesis of (-)-Incarvillateine Employing an Intramolecular Alkylation via Rh-Catalyzed Olefinic C-H Bond Activation

    SciTech Connect

    Tsai, Andy; Bergman, Robert; Ellman, Jonathan

    2008-02-18

    An asymmetric total synthesis of (-)-incarvillateine, a natural product having potent analgesic properties, has been achieved in 11 steps and 15.4% overall yield. The key step is a rhodium-catalyzed intramolecular alkylation of an olefinic C-H bond to set two stereocenters. Additionally, this transformation produces an exocyclic, tetrasubstituted alkene through which the bicyclic piperidine moiety can readily be accessed.

  2. Chelation-Assisted Copper-Mediated Direct Acetylamination of 2-Arylpyridine C-H Bonds with Cyanate Salts.

    PubMed

    Kianmehr, Ebrahim; Amiri Lomedasht, Yousef; Faghih, Nasser; Khan, Khalid Mohammed

    2016-07-15

    In this study, the coupling of 2-phenylpyridine derivatives and potassium cyanate through C-H bond functionalization in the presence of a copper salt is developed for the first time. By this protocol, various heteroarylated acetanilide derivatives are synthesized in good yields. 2-Phenylpyridines containing electron-donating and -withdrawing groups appear to be well-tolerated by this transformation. PMID:27295365

  3. Efficient photocatalytic selective nitro-reduction and C-H bond oxidation over ultrathin sheet mediated CdS flowers.

    PubMed

    Pahari, Sandip Kumar; Pal, Provas; Srivastava, Divesh N; Ghosh, Subhash Ch; Panda, Asit Baran

    2015-06-28

    We report here a visible light driven selective nitro-reduction and oxidation of saturated sp(3) C-H bonds using ultrathin (0.8 nm) sheet mediated uniform CdS flowers as catalyst under a household 40 W CFL lamp and molecular oxygen as oxidant. The CdS flowers were synthesized using a simple surfactant assisted hydrothermal method. PMID:26024214

  4. Stable alkanes containing very long carbon-carbon bonds.

    PubMed

    Fokin, Andrey A; Chernish, Lesya V; Gunchenko, Pavel A; Tikhonchuk, Evgeniya Yu; Hausmann, Heike; Serafin, Michael; Dahl, Jeremy E P; Carlson, Robert M K; Schreiner, Peter R

    2012-08-22

    The metal-induced coupling of tertiary diamondoid bromides gave highly sterically congested hydrocarbon (hetero)dimers with exceptionally long central C-C bonds of up to 1.71 Å in 2-(1-diamantyl)[121]tetramantane. Yet, these dimers are thermally very stable even at temperatures above 200 °C, which is not in line with common C-C bond length versus bond strengths correlations. We suggest that the extraordinary stabilization arises from numerous intramolecular van der Waals attractions between the neighboring H-terminated diamond-like surfaces. The C-C bond rotational dynamics of 1-(1-adamantyl)diamantane, 1-(1-diamantyl)diamantane, 2-(1-adamantyl)triamantane, 2-(1-diamantyl)triamantane, and 2-(1-diamantyl)[121]tetramantane were studied through variable-temperature (1)H- and (13)C NMR spectroscopies. The shapes of the inward (endo) CH surfaces determine the dynamic behavior, changing the central C-C bond rotation barriers from 7 to 33 kcal mol(-1). We probe the ability of popular density functional theory (DFT) approaches (including BLYP, B3LYP, B98, B3LYP-Dn, B97D, B3PW91, BHandHLYP, B3P86, PBE1PBE, wB97XD, and M06-2X) with 6-31G(d,p) and cc-pVDZ basis sets to describe such an unusual bonding situation. Only functionals accounting for dispersion are able to reproduce the experimental geometries, while most DFT functionals are able to reproduce the experimental rotational barriers due to error cancellations. Computations on larger diamondoids reveal that the interplay between the shapes and the sizes of the CH surfaces may even allow the preparation of open-shell alkyl radical dimers (and possibly polymers) that are strongly held together exclusively by dispersion forces.

  5. Stable alkanes containing very long carbon-carbon bonds.

    PubMed

    Fokin, Andrey A; Chernish, Lesya V; Gunchenko, Pavel A; Tikhonchuk, Evgeniya Yu; Hausmann, Heike; Serafin, Michael; Dahl, Jeremy E P; Carlson, Robert M K; Schreiner, Peter R

    2012-08-22

    The metal-induced coupling of tertiary diamondoid bromides gave highly sterically congested hydrocarbon (hetero)dimers with exceptionally long central C-C bonds of up to 1.71 Å in 2-(1-diamantyl)[121]tetramantane. Yet, these dimers are thermally very stable even at temperatures above 200 °C, which is not in line with common C-C bond length versus bond strengths correlations. We suggest that the extraordinary stabilization arises from numerous intramolecular van der Waals attractions between the neighboring H-terminated diamond-like surfaces. The C-C bond rotational dynamics of 1-(1-adamantyl)diamantane, 1-(1-diamantyl)diamantane, 2-(1-adamantyl)triamantane, 2-(1-diamantyl)triamantane, and 2-(1-diamantyl)[121]tetramantane were studied through variable-temperature (1)H- and (13)C NMR spectroscopies. The shapes of the inward (endo) CH surfaces determine the dynamic behavior, changing the central C-C bond rotation barriers from 7 to 33 kcal mol(-1). We probe the ability of popular density functional theory (DFT) approaches (including BLYP, B3LYP, B98, B3LYP-Dn, B97D, B3PW91, BHandHLYP, B3P86, PBE1PBE, wB97XD, and M06-2X) with 6-31G(d,p) and cc-pVDZ basis sets to describe such an unusual bonding situation. Only functionals accounting for dispersion are able to reproduce the experimental geometries, while most DFT functionals are able to reproduce the experimental rotational barriers due to error cancellations. Computations on larger diamondoids reveal that the interplay between the shapes and the sizes of the CH surfaces may even allow the preparation of open-shell alkyl radical dimers (and possibly polymers) that are strongly held together exclusively by dispersion forces. PMID:22835264

  6. Chemically Non-Innocent Cyclic (Alkyl)(Amino)Carbenes: Ligand Rearrangement, C-H and C-F Bond Activation.

    PubMed

    Turner, Zoë R

    2016-08-01

    A cyclic (alkyl)(amino)carbene (CAAC) was found to undergo unprecedented rearrangements and transformations of its core structure in the presence of Group 1 and 2 metals. Although the carbene was also found to be prone to intramolecular C-H activation, it was competent for intermolecular activation of a variety of sp-, sp(2) -, and sp(3) -hybridized C-H bonds. Double C-F activation of hexafluorobenzene was also observed in this work. These processes all hold relevance to the role of these carbenes in catalysis, as well as to their use in the synthesis of new and unusual main group or transition metal complexes. PMID:27363588

  7. Distinctive activation and functionalization of hydrocarbon C-H bonds initiated by Cp*W(NO)(η(3)-allyl)(CH2CMe3) complexes.

    PubMed

    Baillie, Rhett A; Legzdins, Peter

    2014-02-18

    Converting hydrocarbon feedstocks into value-added chemicals continues to offer challenges to contemporary preparative chemists. A particularly important remaining challenge is the selective activation and functionalization of the C(sp(3))-H linkages of alkanes, which are relatively abundant but chemically inert. This Account outlines the discovery and development of C-H bond functionalization mediated by a family of tungsten organometallic nitrosyl complexes. Specifically, it describes how gentle thermolyses of any of four 18-electron Cp*W(NO)(η(3)-allyl)(CH2CMe3) complexes (Cp* = η(5)-C5Me5; η(3)-allyl = η(3)-H2CCHCHMe, η(3)-H2CCHCHSiMe3, η(3)-H2CCHCHPh, or η(3)-H2CCHCMe2) results in the loss of neopentane and the transient formation of a 16-electron intermediate species, Cp*W(NO)(η(2)-allene) and/or Cp*W(NO)(η(2)-diene). We have never detected any of these species spectroscopically, but we infer their existence based on trapping experiments with trimethylphosphine (PMe3) and labeling experiments using deuterated hydrocarbon substrates. This Account first summarizes the syntheses and properties of the four chiral Cp*W(NO)(η(3)-allyl)(CH2CMe3) complexes. It then outlines the various types of C-H activations we have effected with each of the 16-electron (η(2)-allene) or (η(2)-diene) intermediate nitrosyl complexes, and presents the results of mechanistic investigations of some of these processes. It next describes the characteristic chemical properties of the Cp*W(NO)(η(3)-allyl)(η(1)-hydrocarbyl) compounds formed by the single activations of C(sp(3))-H bonds, with particular emphasis on those reactions that result in the selective functionalization of the original hydrocarbon substrate. We are continuing development of methods to release the acyl ligands from the metal centers while keeping the Cp*W(NO)(η(3)-allyl) fragments intact, with the ultimate aim of achieving these distinctive conversions of alkanes into functionalized organics in a

  8. O-H hydrogen bonding promotes H-atom transfer from α C-H bonds for C-alkylation of alcohols.

    PubMed

    Jeffrey, Jenna L; Terrett, Jack A; MacMillan, David W C

    2015-09-25

    The efficiency and selectivity of hydrogen atom transfer from organic molecules are often difficult to control in the presence of multiple potential hydrogen atom donors and acceptors. Here, we describe the mechanistic evaluation of a mode of catalytic activation that accomplishes the highly selective photoredox α-alkylation/lactonization of alcohols with methyl acrylate via a hydrogen atom transfer mechanism. Our studies indicate a particular role of tetra-n-butylammonium phosphate in enhancing the selectivity for α C-H bonds in alcohols in the presence of allylic, benzylic, α-C=O, and α-ether C-H bonds.

  9. Synthesis of a Benzodiazepine-derived Rhodium NHC Complex by C-H Bond Activation

    SciTech Connect

    Bergman, Roberg G.; Gribble, Jr., Michael W.; Ellman, Jonathan A.

    2008-01-30

    The synthesis and characterization of a Rh(I)-NHC complex generated by C-H activation of 1,4-benzodiazepine heterocycle are reported. This complex constitutes a rare example of a carbene tautomer of a 1,4-benzodiazepine aldimine stabilized by transition metal coordination and demonstrates the ability of the catalytically relevant RhCl(PCy{sub 3}){sub 2} fragment to induce NHC-forming tautomerization of heterocycles possessing a single carbene-stabilizing heteroatom. Implications for the synthesis of benzodiazepines and related pharmacophores via C-H functionalization are discussed.

  10. Rationale of the effects from dopants on C-H bond activation for sp2 hybridized nanostructured carbon catalysts

    NASA Astrophysics Data System (ADS)

    Mao, Shanjun; Sun, Xiaoying; Li, Bo; Su, Dang Sheng

    2015-10-01

    Doping has become an effective way to tune the catalytic properties of nanostructured carbon catalysts. Taking C-H activation as an example, first-principles calculations propose that the relative energy level and the BEP rule might be applicable to explain the observed doping effects. Moreover, boron doping is proposed as an effective way to enhance the catalytic performance.Doping has become an effective way to tune the catalytic properties of nanostructured carbon catalysts. Taking C-H activation as an example, first-principles calculations propose that the relative energy level and the BEP rule might be applicable to explain the observed doping effects. Moreover, boron doping is proposed as an effective way to enhance the catalytic performance. Electronic supplementary information (ESI) available: The computational setup, the doping positions for B, N and S doping, the definition of the binding energy and dissociation energy for C2H5 and C2H6 respectively, the transition state and dissociation state structures for the C-H bond activation of C2H6 in the undoped case, and the lengths of the C-H bond of C2H6 at the transition states for both the undoped and doped cases. See DOI: 10.1039/c5nr05759k

  11. Room temperature dehydrogenation of ethane, propane, linear alkanes C4-C8, and some cyclic alkanes by titanium-carbon multiple bonds.

    PubMed

    Crestani, Marco G; Hickey, Anne K; Gao, Xinfeng; Pinter, Balazs; Cavaliere, Vincent N; Ito, Jun-Ichi; Chen, Chun-Hsing; Mindiola, Daniel J

    2013-10-01

    The transient titanium neopentylidyne, [(PNP)Ti≡C(t)Bu] (A; PNP(-)≡N[2-P(i)Pr2-4-methylphenyl]2(-)), dehydrogenates ethane to ethylene at room temperature over 24 h, by sequential 1,2-CH bond addition and β-hydrogen abstraction to afford [(PNP)Ti(η(2)-H2C═CH2)(CH2(t)Bu)] (1). Intermediate A can also dehydrogenate propane to propene, albeit not cleanly, as well as linear and volatile alkanes C4-C6 to form isolable α-olefin complexes of the type, [(PNP)Ti(η(2)-H2C═CHR)(CH2(t)Bu)] (R = CH3 (2), CH2CH3 (3), (n)Pr (4), and (n)Bu (5)). Complexes 1-5 can be independently prepared from [(PNP)Ti═CH(t)Bu(OTf)] and the corresponding alkylating reagents, LiCH2CHR (R = H, CH3(unstable), CH2CH3, (n)Pr, and (n)Bu). Olefin complexes 1 and 3-5 have all been characterized by a diverse array of multinuclear NMR spectroscopic experiments including (1)H-(31)P HOESY, and in the case of the α-olefin adducts 2-5, formation of mixtures of two diastereomers (each with their corresponding pair of enantiomers) has been unequivocally established. The latter has been spectroscopically elucidated by NMR via C-H coupled and decoupled (1)H-(13)C multiplicity edited gHSQC, (1)H-(31)P HMBC, and dqfCOSY experiments. Heavier linear alkanes (C7 and C8) are also dehydrogenated by A to form [(PNP)Ti(η(2)-H2C═CH(n)Pentyl)(CH2(t)Bu)] (6) and [(PNP)Ti(η(2)-H2C═CH(n)Hexyl)(CH2(t)Bu)] (7), respectively, but these species are unstable but can exchange with ethylene (1 atm) to form 1 and the free α-olefin. Complex 1 exchanges with D2C═CD2 with concomitant release of H2C═CH2. In addition, deuterium incorporation is observed in the neopentyl ligand as a result of this process. Cyclohexane and methylcyclohexane can be also dehydrogenated by transient A, and in the case of cyclohexane, ethylene (1 atm) can trap the [(PNP)Ti(CH2(t)Bu)] fragment to form 1. Dehydrogenation of the alkane is not rate-determining since pentane and pentane-d12 can be dehydrogenated to 4 and 4-d12 with comparable

  12. Hydrogen bond-like equatorial C-H⋯O interactions in aqueous 1,3-dioxane: A combined high-pressure infrared and Raman spectroscopy study

    NASA Astrophysics Data System (ADS)

    Chang, Hai-Chou; Jiang, Jyh-Chiang; Chuang, Ching-Wei; Lin, Jui-San; Lai, Wen-Wei; Yang, Yu-Chuan; Lin, Sheng Hsien

    2005-07-01

    Our results demonstrate that the equatorial C-H groups of 1,3-dioxane form hydrogen-bond-like C-H⋯O interactions more readily than do the axial C-H groups. The peak frequency of the strong axial C-H stretch band of 1,3-dioxane in a dilute D 2O solution possesses an unusual non-monotonic pressure dependence, which indicates enhanced C-H⋯O hydrogen bond formation at high pressure. We performed density functional theory calculations to predict the relative energies and total interaction energies of 1,3-dioxane/(water) n clusters and found that the equatorial C-H groups are more favorable sites for hydrogen bonding than are the axial C-H groups.

  13. Reaction of sp/sup 2/ C-H bonds in unactivated alkenes with bis(diphosphine) complexes of iron

    SciTech Connect

    Baker, M.V.; Field, L.D.

    1986-11-12

    Over the last 10 years, there has been much interest in the chemistry of coordinatively unsaturated transition-metal complexes, particularly in the activation of alkyl C-H bonds by complexes of Ir, Rh, Re, and W. Some early fundamental work in the area of C-H bond activation involved Fe(DMPE)/sub 2/ (1) (DMPE = 1,2-bis(dimethylphosphino)ethane), a reactive intermediate generated by reductive elimination of naphthalene from cis-FeH(Np)DMPE)/sub 2/ (Np = 2-naphthyl); however, this system was limited in that only substrates with a reactivity greater than (or comparable to) that of the naphthalene byproduct could be examined. In addition, this route to 1 necessarily required reaction temperatures close to room temperature, where any thermally labile products may not have been sufficiently stable to be observed or characterized. An alternative, more versatile route to 1 is by photolysis of the dihydride FeH/sub 2/(DMPE)/sub 2/ (2). The authors have examined the reactions of 1, generated photochemically at low temperature, with hydrocarbons, and report here the formation of products arising from Fe insertion into sp/sup 2/ C-H bonds of unactivated alkenes.

  14. Phenyltrimethylammonium Salts as Methylation Reagents in the Nickel-Catalyzed Methylation of C-H Bonds.

    PubMed

    Uemura, Takeshi; Yamaguchi, Mao; Chatani, Naoto

    2016-02-24

    Methylation of C(sp(2))-H bonds was achieved through the Ni(II)-catalyzed reaction of benzamides with phenyltrimethylammonium bromide or iodide as the source of the methyl group. The reaction has a broad scope and shows high functional-group compatibility. The reaction is also applicable to the methylation of C(sp(3))-H bonds in aliphatic amides. PMID:26821872

  15. Infrared spectroscopic demonstration of cooperative and anti-cooperative effects in C-H--O hydrogen bonds

    NASA Astrophysics Data System (ADS)

    Samanta, Amit K.; Chakraborty, Tapas

    2010-06-01

    Matrix isolation infrared spectra of 1,2-cyclohexanedione (1,2-CHD) and 3-methyl-1,2-cyclohexanedione are measured in a nitrogen matrix at 8K temperature. The spectra reveal that in the matrix environment both the molecules exist exclusively in monohydroxy tautomeric forms with an intramolecular O-H⋯O=C hydrogen bonding. In the case of 3-MeCD, the fundamental of OH stretching νO--H band appears more red-shifted with larger bandwidth indicating that the intramolecular O-H⋯O hydrogen bond of this molecule is somewhat stronger compared to that of 1,2-CD. Electronic structure calculations at B3LYP/6-311++G∗∗ and MP2/cc-pVTZ levels predict that the monohydroxy tautomer of 1,2-CD is nearly 4.5 kcal/mol more stable than the corresponding diketo tautomer, but in the case of 3-MeCD, the stability difference between the diketo and preferred enol tautomer is more than 7.5 kcal/mol. Analysis of the geometric parameters reveals that the excess stabilization of the latter originates as a result of formation of an intramolecular O⋯H-O⋯H-C type interconnected hydrogen bonding network involving a methyl C-H bond, which interact in a cooperative fashion. The predicted infrared spectrum shows that the formation of such hydrogen bonding network causes large blue-shifting of the H-bonded methyl νC--H transition, and this spectral prediction matches well with the features displayed in the measured spectrum.For intermolecular case, 1:1 complex between 1,2-cyclohexanedione and chloroform have been studied. Here two types of complex is possible, interconnected and bifurcated. In the interconnected complex a cooperative stabilizing effect and in the bifurcated complex an anti-cooperative destabilizing effect of the C-H⋯O hydrogen bond on the intramolecular O-H⋯O bond is observable. In the room temperature solution phase of FTIR spectra, the anti-cooperative complex is observable.

  16. C-H bond activation of benzene by unsaturated η2-cyclopropene and η2-benzyne complexes of niobium.

    PubMed

    Boulho, Cédric; Oulié, Pascal; Vendier, Laure; Etienne, Michel; Pimienta, Véronique; Locati, Abel; Bessac, Fabienne; Maseras, Feliu; Pantazis, Dimitrios A; McGrady, John E

    2010-10-13

    We report the synthesis of a niobium cyclopropyl complex, Tp(Me2)NbMe(c-C(3)H(5))(MeCCMe), and show that thermal loss of methane from this compound generates an intermediate that is capable of activating both aliphatic and aromatic C-H bonds. Isotopic labeling, trapping studies, a detailed kinetic analysis, and density functional theory all suggest that the active intermediate is an η(2)-cyclopropene complex formed via β-hydrogen abstraction rather than an isomeric cyclopropylidene species. C-H activation chemistry of this type represents a rather unusual reactivity pattern for η(2)-alkene complexes but is favored in this case by the strain in the C(3) ring which prevents the decomposition of the key intermediate via loss of cyclopropene.

  17. Computational study on the mechanism and selectivity of C-H bond activation and dehydrogenative functionalization in the synthesis of rhazinilam.

    PubMed

    Ellis, Corey S; Ess, Daniel H

    2011-09-01

    The key platinum mediated C-H bond activation and functionalization steps in the synthesis of (-)-rhazinilam (Johnson, J. A.; Li, N.; Sames, D. J. Am. Chem. Soc. 2002, 124, 6900) were investigated using the M06 and B3LYP density functional approximation methods. This computational study reveals that ethyl group dehydrogenation begins with activation of a primary C-H bond in preference to a secondary C-H bond in an insertion/methane elimination pathway. The C-H activation step is found to be reversible while the methane elimination (reductive elimination) transition state controls rate and diastereoselectivity. The chiral oxazolinyl ligand induces ethyl group selectivity through stabilizing weak interactions between its phenyl group (or cyclohexyl group) and the carboxylate group. After C-H activation and methane elimination steps, Pt-C bond functionalization occurs through β-hydride elimination to give the alkene platinum hydride complex. PMID:21812492

  18. Raman analysis of bond conformations in the rotator state and premelting of normal alkanes.

    PubMed

    Kotula, Anthony P; Walker, Angela R Hight; Migler, Kalman B

    2016-06-14

    We perform Raman spectroscopic measurements on normal alkanes (CnH2n+2) to quantify the n dependence of the conformational disorder that occurs below the melt temperature. We employ a three-state spectral analysis method originally developed for semi-crystalline polyethylene that posits crystalline, amorphous, and non-crystalline consecutive trans (NCCT) conformations to extract their respective mass fractions. For the alkanes studied that melt via a rotator phase (21 ≤n≤ 37), we find that conformational disorder can be quantified by the loss of NCCT mass fraction, which systematically decreases with increasing chain length. For those that melt directly via the crystal phase (n≥ 40), we observe NCCT conformational mass fractions that are independent of chain length but whose disordered mass fraction increases with length. These complement prior IR measurements which measure disorder via gauche conformations, but have not been able to measure the mass fraction of this disorder as a function of n. An interesting feature of the three-state analysis when applied to alkanes is that the measured fraction of disordered chain conformations in the rotator phase of (10 to 30)% greatly exceeds the mass fraction of gauche bonds (1 to 7)% as measured from IR; we reconcile this difference through DFT calculations. PMID:27174157

  19. Metal-organic cooperative catalysis in C-H and C-C bond activation and its concurrent recovery.

    PubMed

    Park, Young Jun; Park, Jung-Woo; Jun, Chul-Ho

    2008-02-01

    The development of an efficient catalytic activation (cleavage) system for C-H and C-C bonds is an important challenge in organic synthesis, because these bonds comprise a variety of organic molecules such as natural products, petroleum oils, and polymers on the earth. Among many elegant approaches utilizing transition metals to activate C-H and C-C bonds facilely, chelation-assisted protocols based on the coordinating ability of an organic moiety have attracted great attention, though they have often suffered from the need for an intact coordinating group in a substrate. In this Account, we describe our entire efforts to activate C-H or C-C bonds adjacent to carbonyl groups by employing a new concept of metal-organic cooperative catalysis (MOCC), which enables the temporal installation of a 2-aminopyridyl group into common aldehydes or ketones in a catalytic way. Consequently, a series of new catalytic reactions such as alcohol hydroacylation, oxo-ester synthesis, C-C triple bond cleavage, hydrative dimerization of alkynes, and skeletal rearrangements of cyclic ketones was realized through MOCC. In particular, in the quest for an optimized MOCC system composed of a Wilkinson's catalyst (Ph 3P) 3RhCl and an organic catalyst (2-amino-3-picoline), surprising efficiency enhancements could be achieved when benzoic acid and aniline were introduced as promoters for the aldimine formation process. Furthermore, a notable accomplishment of C-C bond activation has been made using 2-amino-3-picoline as a temporary chelating auxiliary in the reactions of unstrained ketones with various terminal olefins and Wilkinson's catalyst. In the case of seven-membered cyclic ketones, an interesting ring contraction to five- or six-membered ones takes place through skeletal rearrangements initiated by the C-C bond activation of MOCC. On the other hand, the fundamental advances of these catalytic systems into recyclable processes could be achieved by immobilizing both metal and organic

  20. Matching plasmon resonances to the C=C and C-H bonds in estradiol

    NASA Astrophysics Data System (ADS)

    Mbomson, Ifeoma G.; McMeekin, Scott; De La Rue, Richard; Johnson, Nigel P.

    2015-03-01

    We tune nanoantennas to resonate within mid-infrared wavelengths to match the vibrational resonances of C=C and C-H of the hormone estradiol. Modelling and fabrication of the nanoantennas produce plasmon resonances between 2 μm to 7 μm. The hormone estradiol was dissolved in ethanol and evaporated, leaving thickness of a few hundreds of nanometres on top of gold asymmetric split H-like shaped on a fused silica substrate. The reflectance was measured and a red-shift is recorded from the resonators plasmonic peaks. Fourier transform infrared spectroscopy is use to observe enhanced spectra of the stretching modes for the analyte which belongs to alkenyl biochemical group.

  1. Born-Oppenheimer energy surfaces of similar molecules: Interrelations between bond lengths, bond angles, and frequencies of normal vibrations in alkanes

    NASA Astrophysics Data System (ADS)

    Lifson, Shneior; Stern, Peter S.

    1982-11-01

    CH bond lengths, HCH and HCC bond angles, and CH symmetric and asymmetric stretching frequencies in alkane molecules are placed into four groups according to their occurrence in CH4, -CH3, CH2, and -CH, and are seen to vary in a regular fashion. The physical rationale offered for these variations relates them to balanced interactions between adjacent orbitals of CH and CC bonds, which are assumed to be common to all energy surfaces of alkane molecules. The regular variations are quantitatively reproduced by a consistent force field of alkanes, which in place of the usual harmonic stretching potentials uses only two Morse potentials, one for the CH bond, common to all four groups, and one for the CC bond. The correlated variation in bond lengths and bond angles, due to orbital interactions, is represented mainly by stretch-bend, stretch-stretch, and bend-bend cross terms. The resulting stretching frequencies, being dependent upon the second derivative of the Morse function, decrease with increasing bond length. The new force field yields bond lengths, bond angles, and vibrational frequencies, and reproduces the observed trend in their variation, mostly to within experimental accuracy. Remaining deviations are attributed to vicinal and higher order nonbonded interactions. Methane is included as a member of the alkane family and the new force field accounts successfully for its vibrational frequencies.

  2. Synthesis of a tricyclic mescaline analogue by catalytic C-H bond activation.

    PubMed

    Ahrendt, Kateri A; Bergman, Robert G; Ellman, Jonathan A

    2003-04-17

    [reaction: see text] A tetrahydrobis(benzofuran) mescaline analogue has been prepared in six steps and 38% overall yield from (4'-O-methyl)methyl gallate. The key step in this synthesis is a tandem cyclization reaction via directed C[bond]H activation followed by olefin insertion.

  3. Enhanced positron annihilation in small gaseous hydrocarbons: Threshold effects from symmetric C-H bond deformations

    NASA Astrophysics Data System (ADS)

    Nishimura, Tamio; Gianturco, Franco A.

    2005-08-01

    The present results report a computational analysis of the effects of symmetric bond stretching during positron scattering from polyatomic hydrocarbon molecules in the gas phase. The collisions are considered at very low energies where the behavior of the s -wave scattering length can be analyzed and where signatures of virtual state formation appear for all the three systems considered ( C2H2 , C2H4 , and C2H6 ). Furthermore, the present calculations show that the stretching of the CH bonds in all molecules causes the moving of the existing virtual state closer to threshold and further makes it become a bound state whenever highly distorted molecules are involved. The effects of these changes are further seen to cause a marked enhancing of the corresponding annihilation parameters Zeff at low collision energies, in line with what is experimentally observed for such gases. The significance of such model calculations is discussed in some detail.

  4. Infrared spectroscopic demonstration of cooperative and anti-cooperative effects in C-H--O hydrogen bonds

    NASA Astrophysics Data System (ADS)

    Samanta, Amit K.; Chakraborty, Tapas

    Matrix isolation infrared spectra of 1,2-cyclohexanedione (1,2-CHD) and 3-methyl-1,2-cyclohexanedione are measured in a nitrogen matrix at 8K temperature. The spectra reveal that in the matrix environment both the molecules exist exclusively in monohydroxy tautomeric forms with an intramolecular O-H⋯O=C hydrogen bonding. In the case of 3-MeCD, the fundamental of OH stretching νO--H band appears more red-shifted with larger bandwidth indicating that the intramolecular O-H⋯O hydrogen bond of this molecule is somewhat stronger compared to that of 1,2-CD. Electronic structure calculations at B3LYP/6-311++G∗∗ and MP2/cc-pVTZ levels predict that the monohydroxy tautomer of 1,2-CD is nearly 4.5 kcal/mol more stable than the corresponding diketo tautomer, but in the case of 3-MeCD, the stability difference between the diketo and preferred enol tautomer is more than 7.5 kcal/mol. Analysis of the geometric parameters reveals that the excess stabilization of the latter originates as a result of formation of an intramolecular O⋯H-O⋯H-C type interconnected hydrogen bonding network involving a methyl C-H bond, which interact in a cooperative fashion. The predicted infrared spectrum shows that the formation of such hydrogen bonding network causes large blue-shifting of the H-bonded methyl νC--H transition, and this spectral prediction matches well with the features displayed in the measured spectrum.For intermolecular case, 1:1 complex between 1,2-cyclohexanedione and chloroform have been studied. Here two types of complex is possible, interconnected and bifurcated. In the interconnected complex a cooperative stabilizing effect and in the bifurcated complex an anti-cooperative destabilizing effect of the C-H⋯O hydrogen bond on the intramolecular O-H⋯O bond is observable. In the room temperature solution phase of FTIR spectra, the anti-cooperative complex is observable.

  5. Polymer- and silica-supported iron BPMEN-inspired catalysts for C-H bond functionalization reactions.

    PubMed

    Feng, Yan; Moschetta, Eric G; Jones, Christopher W

    2014-11-01

    Direct catalytic C-H bond functionalization is a key challenge in synthetic chemistry, with many popular C-H activation methodologies involving precious-metal catalysts. In recent years, iron catalysts have emerged as a possible alternative to the more common precious-metal catalysts, owing to its high abundance, low cost, and low toxicity. However, iron catalysts are plagued by two key factors: the ligand cost and the low turnover numbers (TONs) typically achieved. In this work, two approaches are presented to functionalize the popular N(1),N(2)-dimethyl-N(1),N(2)-bis(pyridin-2-ylmethyl)ethane-1,2-diamine (BPMEN) ligand, so that it can be supported on porous silica or polymer resin supports. Four new catalysts are prepared and evaluated in an array of catalytic C-H functionalization reactions by using cyclohexane, cyclohexene, cyclooctane, adamantane, benzyl alcohol, and cumene with aqueous hydrogen peroxide. Catalyst recovery and recycling is demonstrated by using supported catalysts, which allows for a modest increase in the TON achieved with these catalysts.

  6. Intermolecular activation of hydrocarbon C-H bonds under ambient conditions by 16-electron neopentylidene and benzyne complexes of molybdenum.

    PubMed

    Wada, Kenji; Pamplin, Craig B; Legzdins, Peter; Patrick, Brian O; Tsyba, Irina; Bau, Robert

    2003-06-11

    CpMo(NO)(CH(2)CMe(3))(2) (1), a complex with alpha-agostic C-H.Mo interactions, evolves neopentane in neat hydrocarbon solutions at room temperature and forms the transient 16-electron alkylidene complex, CpMo(NO)(=CHCMe(3)), which subsequently activates solvent C-H bonds. Thus, it reacts with tetramethylsilane or mesitylene to form CpMo(NO)(CH(2)CMe(3))(CH(2)SiMe(3)) (2) or CpMo(NO)(CH(2)CMe(3))(eta(2)-CH(2)C(6)H(3)-3,5-Me(2)) (3), respectively, in nearly quantitative yields. Under identical conditions, 1 in p-xylene generates a mixture of sp(2) and sp(3) C-H bond activation products, namely CpMo(NO)(CH(2)CMe(3))(C(6)H(3)-2,5-Me(2)) (4, 73%) and CpMo(NO)(CH(2)CMe(3))(eta(2)-CH(2)C(6)H(4)-4-Me) (5, 27%). In benzene at room temperature, 1 transforms to a mixture of CpMo(NO)(CH(2)CMe(3))(C(6)H(5)) (6) and CpMo(NO)(C(6)H(5))(2) (7) in a sequential manner. Most interestingly, the thermal activation of 6 at ambient temperatures gives rise to two parallel modes of reactivity involving either the elimination of benzene and formation of CpMo(NO)(=CHCMe(3)) or the elimination of neopentane and formation of the benzyne complex, CpMo(NO)(eta(2)-C(6)H(4)). In pyridine, these intermediates are trapped as the isolable 18-electron adducts, CpMo(NO)(=CHCMe(3))(NC(5)H(5)) (8) and CpMo(NO)(eta(2)-C(6)H(4))(NC(5)H(5)) (9), and, in hydrocarbon solvents, they effect the intermolecular activation of aliphatic C-H bonds at room temperature to generate mixtures of neopentyl- and phenyl-containing derivatives. However, the distribution of products resulting from the hydrocarbon activations is dependent on the nature of the solvent, probably due to solvation effects and the presence of sigma- or pi-hydrocarbon complexes on the reaction coordinates of the alkylidene and the benzyne intermediates. The results of DFT calculations on these processes in the gas phase support the existence of such hydrocarbon complexes and indicate that better agreement with experimental observations is obtained

  7. Highly Active Gold(I)-Silver(I) Oxo Cluster Activating sp³ C-H Bonds of Methyl Ketones under Mild Conditions.

    PubMed

    Pei, Xiao-Li; Yang, Yang; Lei, Zhen; Chang, Shan-Shan; Guan, Zong-Jie; Wan, Xian-Kai; Wen, Ting-Bin; Wang, Quan-Ming

    2015-04-29

    The activation of C(sp(3))-H bonds is challenging, due to their high bond dissociation energy, low proton acidity, and highly nonpolar character. Herein we report a unique gold(I)-silver(I) oxo cluster protected by hemilabile phosphine ligands [OAu3Ag3(PPhpy2)3](BF4)4 (1), which can activate C(sp(3))-H bonds under mild conditions for a broad scope of methyl ketones (RCOCH3, R = methyl, phenyl, 2-methylphenyl, 2-aminophenyl, 2-hydroxylphenyl, 2-pyridyl, 2-thiazolyl, tert-butyl, ethyl, isopropyl). Activation happens via triple deprotonation of the methyl group, leading to formation of heterometallic Au(I)-Ag(I) clusters with formula RCOCAu4Ag4(PPhpy2)4(BF4)5 (PPhpy2 = bis(2-pyridyl)phenylphosphine). Cluster 1 can be generated in situ via the reaction of [OAu3Ag(PPhpy2)3](BF4)2 with 2 equiv of AgBF4. The oxo ion and the metal centers are found to be essential in the cleavage of sp(3) C-H bonds of methyl ketones. Interestingly, cluster 1 selectively activates the C-H bonds in -CH3 rather than the N-H bonds in -NH2 or the O-H bond in -OH which is traditionally thought to be more reactive than C-H bonds. Control experiments with butanone, 3-methylbutanone, and cyclopentanone as substrates show that the auration of the C-H bond of the terminal methyl group is preferred over secondary or tertiary sp(3) C-H bonds; in other words, the C-H bond activation is influenced by steric effect. This work highlights the powerful reactivity of metal clusters toward C-H activation and sheds new light on gold(I)-mediated catalysis.

  8. The Stereoselective Formation of Bicyclic Enamines with Bridgehead Unsaturation via Tandem C-H Bond Activation/Alkenylation/Electrocyclization

    SciTech Connect

    Ellman, Jonathan A.; Yotphan, Sirilata; Bergman, Robert

    2007-12-10

    Rhodium-catalyzed intermolecular C-H activation of {alpha}, {beta}-unsaturated imines in the presence of alkynes leads to a tandem process in which coupling to the alkyne occurs at the {beta}-C-H bond of the imine, followed by electrocyclization of the resulting azatriene intermediates to give dihydropyridines (eq 1). Consideration of the intramolecular version of this overall transformation (Scheme 1) raises interesting regiochemical issues. For example in a compound such as 1, where the nitrogen and alkyne are connected by a 4-carbon tether, the presumed first-formed hydrido(vinyl)rhodium function can add to the triple bond in a 1,2-fashion, producing complex 2 with a new endocyclic double bond. Alternatively, addition might occur in a 2,1-fashion, leading to product 4 with an exocyclic double bond. We now wish to report that this intramolecular cyclization occurs smoothly at 100 C, and the exocyclic double bond route is exclusively followed. Remarkably, products such as 4 do not resist further cyclization. Even though both the transition state for this process and the resulting product are presumably strained, the overall transformation leads to good yields of unusual bridgehead doubly-bonded enamines such as 5. The unique chemistry of conjugated enamine 5 is consistent with the increased strain of this molecule as well as with inhibited conjugation between the nitrogen lone pair and the adjacent double bond (vida infra). We began our investigation into the C-H activation/cyclization of alkyne-tethered imine 1 by extensive screening of transition metal catalysts for this process. Rhodium-based catalysts were found to be the most efficient (Table 1), leading exclusively to the bridgehead dienamine; none of the catalysts that were employed in the screening led to quinolizidine 3 or to the product of intramolecular Diels-Alder reaction. The optimized reaction conditions employ the electron-rich monophosphine ligand (p-NMe{sub 2})PhPEt{sub 2} in 1:1 ratio relative

  9. Tuning the reactivity of Fe(V)(O) toward C-H bonds at room temperature: effect of water.

    PubMed

    Singh, Kundan K; Tiwari, Mrityunjay k; Ghosh, Munmun; Panda, Chakadola; Weitz, Andrew; Hendrich, Michael P; Dhar, Basab B; Vanka, Kumar; Sen Gupta, Sayam

    2015-02-16

    The presence of an Fe(V)(O) species has been postulated as the active intermediate for the oxidation of both C-H and C═C bonds in the Rieske dioxygenase family of enzymes. Understanding the reactivity of these high valent iron-oxo intermediates, especially in an aqueous medium, would provide a better understanding of these enzymatic reaction mechanisms. The formation of an Fe(V)(O) complex at room temperature in an aqueous CH3CN mixture that contains up to 90% water using NaOCl as the oxidant is reported here. The stability of Fe(V)(O) decreases with increasing water concentration. We show that the reactivity of Fe(V)(O) toward the oxidation of C-H bonds, such as those in toluene, can be tuned by varying the amount of water in the H2O/CH3CN mixture. Rate acceleration of up to 60 times is observed for the oxidation of toluene upon increasing the water concentration. The role of water in accelerating the rate of the reaction has been studied using kinetic measurements, isotope labeling experiments, and density functional theory (DFT) calculations. A kinetic isotope effect of ∼13 was observed for the oxidation of toluene and d8-toluene showing that C-H abstraction was involved in the rate-determining step. Activation parameters determined for toluene oxidation in H2O/CH3CN mixtures on the basis of Eyring plots for the rate constants show a gain in enthalpy with a concomitant loss in entropy. This points to the formation of a more-ordered transition state involving water molecules. To further understand the role of water, we performed a careful DFT study, concentrating mostly on the rate-determining hydrogen abstraction step. The DFT-optimized structure of the starting Fe(V)(O) and the transition state indicates that the rate enhancement is due to the transition state's favored stabilization over the reactant due to enhanced hydrogen bonding with water.

  10. Iron-Carbonyl-Catalyzed Redox-Neutral [4+2] Annulation of N-H Imines and Internal Alkynes by C-H Bond Activation.

    PubMed

    Jia, Teng; Zhao, Chongyang; He, Ruoyu; Chen, Hui; Wang, Congyang

    2016-04-18

    Stoichiometric C-H bond activation of arenes mediated by iron carbonyls was reported by Pauson as early as in 1965, yet the catalytic C-H transformations have not been developed. Herein, an iron-catalyzed annulation of N-H imines and internal alkynes to furnish cis-3,4-dihydroisoquinolines is described, and represents the first iron-carbonyl-catalyzed C-H activation reaction of arenes. Remarkablely, this is also the first redox-neutral [4+2] annulation of imines and alkynes proceeding by C-H activation. The reaction also features only cis stereoselectivity and excellent atom economy as neither base, nor external ligand, nor additive is required. Experimental and theoretical studies reveal an oxidative addition mechanism for C-H bond activation to afford a dinuclear ferracycle and a synergetic diiron-promoted H-transfer to the alkyne as the turnover-determining step.

  11. Oxygen activation and intramolecular C-H bond activation by an amidate-bridged diiron(II) complex.

    PubMed

    Jones, Matthew B; Hardcastle, Kenneth I; Hagen, Karl S; MacBeth, Cora E

    2011-07-18

    A diiron(II) complex containing two μ-1,3-(κN:κO)-amidate linkages has been synthesized using the 2,2',2''-tris(isobutyrylamido)triphenylamine (H(3)L(iPr)) ligand. The resulting diiron complex, 1, reacts with dioxygen (or iodosylbenzene) to effect intramolecular C-H bond activation at the methine position of the ligand isopropyl group. The ligand-activated product, 2, has been isolated and characterized by a variety of methods including X-ray crystallography. Electrospray ionization mass spectroscopy of 2 prepared from(18)O(2) was used to confirm that the oxygen atom incorporated into the ligand framework is derived from molecular oxygen.

  12. Use of chemical auxiliaries to control p450 enzymes for predictable oxidations at unactivated C-h bonds of substrates.

    PubMed

    Auclair, Karine; Polic, Vanja

    2015-01-01

    Cytochrome P450 enzymes (P450s) have the ability to oxidize unactivated C-H bonds of substrates with remarkable regio- and stereoselectivity. Comparable selectivity for chemical oxidizing agents is typically difficult to achieve. Hence, there is an interest in exploiting P450s as potential biocatalysts. Despite their impressive attributes, the current use of P450s as biocatalysts is limited. While bacterial P450 enzymes typically show higher activity, they tend to be highly selective for one or a few substrates. On the other hand, mammalian P450s, especially the drug-metabolizing enzymes, display astonishing substrate promiscuity. However, product prediction continues to be challenging. This review discusses the use of small molecules for controlling P450 substrate specificity and product selectivity. The focus will be on two approaches in the area: (1) the use of decoy molecules, and (2) the application of substrate engineering to control oxidation by the enzyme.

  13. Low-valent niobium-mediated double activation of C-F/C-H bonds: fluorene synthesis from o-arylated alpha,alpha,alpha-trifluorotoluene derivatives.

    PubMed

    Fuchibe, Kohei; Akiyama, Takahiko

    2006-02-01

    By the treatment of 0.3 molar amount of NbCl5 and LiAlH4, o-arylated alpha,alpha,alpha-trifluorotoluenes afforded fluorene derivatives in good yields. C-F bonds of the CF3 group and the neighboring ortho C-H bond were doubly activated to give the coupling products. PMID:16448098

  14. Synthesis of 2-oxindoles via 'transition-metal-free' intramolecular dehydrogenative coupling (IDC) of sp(2) C-H and sp(3) C-H bonds.

    PubMed

    Kumar, Nivesh; Ghosh, Santanu; Bhunia, Subhajit; Bisai, Alakesh

    2016-01-01

    The synthesis of a variety of 2-oxindoles bearing an all-carbon quaternary center at the pseudo benzylic position has been achieved via a 'transition-metal-free' intramolecular dehydrogenative coupling (IDC). The construction of 2-oxindole moieties was carried out through formation of carbon-carbon bonds using KOt-Bu-catalyzed one pot C-alkylation of β-N-arylamido esters with alkyl halides followed by a dehydrogenative coupling. Experimental evidences indicated toward a radical-mediated path for this reaction. PMID:27559367

  15. Hydrogen-bonding effects on the reactivity of [X-Fe(III)-O-Fe(IV)═O] (X = OH, F) complexes toward C-H bond cleavage.

    PubMed

    Xue, Genqiang; Geng, Caiyun; Ye, Shengfa; Fiedler, Adam T; Neese, Frank; Que, Lawrence

    2013-04-01

    Complexes 1-OH and 1-F are related complexes that share similar [X-Fe(III)-O-Fe(IV)═O](3+) core structures with a total spin S of ½, which arises from antiferromagnetic coupling of an S = 5/2 Fe(III)-X site and an S = 2 Fe(IV)═O site. EXAFS analysis shows that 1-F has a nearly linear Fe(III)-O-Fe(IV) core compared to that of 1-OH, which has an Fe-O-Fe angle of ~130° due to the presence of a hydrogen bond between the hydroxo and oxo groups. Both complexes are at least 1000-fold more reactive at C-H bond cleavage than 2, a related complex with a [OH-Fe(IV)-O-Fe(IV)═O](4+) core having individual S = 1 Fe(IV) units. Interestingly, 1-F is 10-fold more reactive than 1-OH. This raises an interesting question about what gives rise to the reactivity difference. DFT calculations comparing 1-OH and 1-F strongly suggest that the H-bond in 1-OH does not significantly change the electrophilicity of the reactive Fe(IV)═O unit and that the lower reactivity of 1-OH arises from the additional activation barrier required to break its H-bond in the course of H-atom transfer by the oxoiron(IV) moiety.

  16. Tuning reactivity and selectivity in hydrogen atom transfer from aliphatic C-H bonds to alkoxyl radicals: role of structural and medium effects.

    PubMed

    Salamone, Michela; Bietti, Massimo

    2015-11-17

    Hydrogen atom transfer (HAT) is a fundamental reaction that takes part in a wide variety of chemical and biological processes, with relevant examples that include the action of antioxidants, damage to biomolecules and polymers, and enzymatic and biomimetic reactions. Moreover, great attention is currently devoted to the selective functionalization of unactivated aliphatic C-H bonds, where HAT based procedures have been shown to play an important role. In this Account, we describe the results of our recent studies on the role of structural and medium effects on HAT from aliphatic C-H bonds to the cumyloxyl radical (CumO(•)). Quantitative information on the reactivity and selectivity patterns observed in these reactions has been obtained by time-resolved kinetic studies, providing a deeper understanding of the factors that govern HAT from carbon and leading to the definition of useful guidelines for the activation or deactivation of aliphatic C-H bonds toward HAT. In keeping with the electrophilic character of alkoxyl radicals, polar effects can play an important role in the reactions of CumO(•). Electron-rich C-H bonds are activated whereas those that are α to electron withdrawing groups are deactivated toward HAT, with these effects being able to override the thermodynamic preference for HAT from the weakest C-H bond. Stereoelectronic effects can also influence the reactivity of the C-H bonds of ethers, amines, and amides. HAT is most rapid when these bonds can be eclipsed with a lone pair on an adjacent heteroatom or with the π-system of an amide functionality, thus allowing for optimal orbital overlap. In HAT from cyclohexane derivatives, tertiary axial C-H bond deactivation and tertiary equatorial C-H bond activation have been observed. These effects have been explained on the basis of an increase in torsional strain or a release in 1,3-diaxial strain in the HAT transition states, with kH(eq)/kH(ax) ratios that have been shown to exceed one order of

  17. Tuning reactivity and selectivity in hydrogen atom transfer from aliphatic C-H bonds to alkoxyl radicals: role of structural and medium effects.

    PubMed

    Salamone, Michela; Bietti, Massimo

    2015-11-17

    Hydrogen atom transfer (HAT) is a fundamental reaction that takes part in a wide variety of chemical and biological processes, with relevant examples that include the action of antioxidants, damage to biomolecules and polymers, and enzymatic and biomimetic reactions. Moreover, great attention is currently devoted to the selective functionalization of unactivated aliphatic C-H bonds, where HAT based procedures have been shown to play an important role. In this Account, we describe the results of our recent studies on the role of structural and medium effects on HAT from aliphatic C-H bonds to the cumyloxyl radical (CumO(•)). Quantitative information on the reactivity and selectivity patterns observed in these reactions has been obtained by time-resolved kinetic studies, providing a deeper understanding of the factors that govern HAT from carbon and leading to the definition of useful guidelines for the activation or deactivation of aliphatic C-H bonds toward HAT. In keeping with the electrophilic character of alkoxyl radicals, polar effects can play an important role in the reactions of CumO(•). Electron-rich C-H bonds are activated whereas those that are α to electron withdrawing groups are deactivated toward HAT, with these effects being able to override the thermodynamic preference for HAT from the weakest C-H bond. Stereoelectronic effects can also influence the reactivity of the C-H bonds of ethers, amines, and amides. HAT is most rapid when these bonds can be eclipsed with a lone pair on an adjacent heteroatom or with the π-system of an amide functionality, thus allowing for optimal orbital overlap. In HAT from cyclohexane derivatives, tertiary axial C-H bond deactivation and tertiary equatorial C-H bond activation have been observed. These effects have been explained on the basis of an increase in torsional strain or a release in 1,3-diaxial strain in the HAT transition states, with kH(eq)/kH(ax) ratios that have been shown to exceed one order of

  18. Axial Chiral Bisbenzophenazines: Solid-State Self-Assembly via Halide Hydrogen Bonds Triggered by Linear Alkanes

    PubMed Central

    2015-01-01

    An axial chiral tetrachlorinated bisbenzo[a]phenazine has been discovered that undergoes an alkane-induced shift in the solid state from a disordered amorphous form to an ordered polycrystalline form. This phase transition is caused by the formation of pores that accommodate linear alkanes of varying lengths with a very strong affinity as judged by differential scanning calorimetry. Single crystal X-ray structure analysis revealed that a series of weak phenolic OH···Cl hydrogen bonds dictates the pore structure. These weak interactions can be disrupted mechanically, causing the material to revert to the amorphous form. Notably, the interchange between the amorphous and crystalline forms is readily reversible and is easily observed by characteristic colorimetric changes. Measurements via photoimage processing reveal that the degree of color change is dictated by the type of alkane employed. PMID:25019179

  19. Theoretical study of the C-H bond dissociation energies of CH4, C2H2, C2H4, and H2C2O

    NASA Technical Reports Server (NTRS)

    Bauschlicher, Charles W., Jr.; Langhoff, Stephen R.

    1991-01-01

    The successive C-H bond dissociation energies of CH4, C2H2, C2H4, and H2C2O (ketene) are determined using large-basis sets and a high level of correlation treatment. For CH4, C2H2, and C2H4 the computed values are in excellent agreement with experiment. Using these results, the values 107.9 + or - 2.0 and 96.7 + or - 2.0 kcal/mol are recommended for the C-H bond dissociation energies of H2C2O and HC2O, respectively.

  20. Rhenium-Catalyzed Synthesis of 1,3-Diiminoisoindolines via Insertion of Carbodiimides into a C-H Bond of Aromatic and Heteroaromatic Imidates.

    PubMed

    Wang, Zijia; Sueki, Shunsuke; Kanai, Motomu; Kuninobu, Yoichiro

    2016-05-20

    The rhenium-catalyzed synthesis of 1,3-diiminoisoindolines and their related compounds from aromatic or heteroaromatic imidates and carbodiimides are reported via C-H bond activation. This reaction is the first example of a transition-metal-catalyzed insertion of carbodiimides into an aromatic or heteroaromatic C-H bond and a novel method for synthesizing 1,3-diiminoisoindolines and their related compounds. Unsymmetrical 1,3-diiminoisoindolines were easily obtained using this method. The reaction proceeded in good to excellent yield using a variety of substrates. PMID:27153181

  1. Mechanistic insights into the C-H bond activation of hydrocarbons by chromium(IV) oxo and chromium(III) superoxo complexes.

    PubMed

    Cho, Kyung-Bin; Kang, Hyeona; Woo, Jaeyoung; Park, Young Jun; Seo, Mi Sook; Cho, Jaeheung; Nam, Wonwoo

    2014-01-01

    The mechanism of the C-H bond activation of hydrocarbons by a nonheme chromium(IV) oxo complex bearing an N-methylated tetraazamacrocyclic cyclam (TMC) ligand, [Cr(IV)(O)(TMC)(Cl)](+) (2), has been investigated experimentally and theoretically. In experimental studies, reaction rates of 2 with substrates having weak C-H bonds were found to depend on the concentration and bond dissociation energies of the substrates. A large kinetic isotope effect value of 60 was determined in the oxidation of dihydroanthracene (DHA) and deuterated DHA by 2. These results led us to propose that the C-H bond activation reaction occurs via a H-atom abstraction mechanism, in which H-atom abstraction of substrates by 2 is the rate-determining step. In addition, formation of a chromium(III) hydroxo complex, [Cr(III)(OH)(TMC)(Cl)](+) (3), was observed as a decomposed product of 2 in the C-H bond activation reaction. The Cr(III)OH product was characterized unambiguously with various spectroscopic methods and X-ray crystallography. Density functional theory (DFT) calculations support the experimental observations that the C-H bond activation by 2 does not occur via the conventional H-atom-abstraction/oxygen-rebound mechanism and that 3 is the product formed in this C-H bond activation reaction. DFT calculations also propose that 2 may have some Cr(III)O(•-) character. The oxidizing power of 2 was then compared with that of a chromium(III) superoxo complex bearing the identical TMC ligand, [Cr(III)(O2)(TMC)(Cl)](+) (1), in the C-H bond activation reaction. By performing reactions of 1 and 2 with substrates under identical conditions, we were able to demonstrate that the reactivity of 2 is slightly greater than that of 1. DFT calculations again support this experimental observation, showing that the rate-limiting barrier for the reaction with 2 is slightly lower than that of 1.

  2. Homo- and heteroleptic alkoxycarbene f-element complexes and their reactivity towards acidic N-H and C-H bonds.

    PubMed

    Arnold, Polly L; Cadenbach, Thomas; Marr, Isobel H; Fyfe, Andrew A; Bell, Nicola L; Bellabarba, Ronan; Tooze, Robert P; Love, Jason B

    2014-10-14

    The reactivity of a series of organometallic rare earth and actinide complexes with hemilabile NHC-ligands towards substrates with acidic C-H and N-H bonds is described. The synthesis, characterisation and X-ray structures of the new heteroleptic mono- and bis(NHC) cyclopentadienyl complexes LnCp2(L) 1 (Ln = Sc, Y, Ce; L = alkoxy-tethered carbene [OCMe2CH2(1-C{NCHCHN(i)Pr})]), LnCp(L)2 (Ln = Y) , and the homoleptic tetrakis(NHC) complex Th(L)4 4 are described. The reactivity of these complexes, and of the homoleptic complexes Ln(L)3 (Ln = Sc 3, Ce), with E-H substrates is described, where EH = pyrrole C4H4NH, indole C8H6NH, diphenylacetone Ph2CC(O)Me, terminal alkynes RC≡CH (R = Me3Si, Ph), and cyclopentadiene C5H6. Complex 1-Y heterolytically cleaves and adds pyrrole and indole N-H across the metal carbene bond, whereas 1-Ce does not, although 3 and 4 form H-bonded adducts. Complexes 1-Y and 1-Sc form adducts with CpH without cleaving the acidic C-H bond, 1-Ce cleaves the Cp-H bond, but 2 reacts to form the very rare H(+)-[C5H5](-)-H(+) motif. Complex 1-Ce cleaves alkyne C-H bonds but the products rearrange upon formation, while complex 1-Y cleaves the C-H bond in diphenylacetone forming a product which rearranges to the Y-O bonded enolate product.

  3. Unexpected cyclization of tritylamines promoted by copper salt through C-H and C-N bond cleavages to produce acridine derivatives.

    PubMed

    Morioka, Ryosuke; Hirano, Koji; Satoh, Tetsuya; Miura, Masahiro

    2014-09-26

    Herein, we demonstrate that tritylamines undergo an unprecedented copper-mediated cyclization involving the cleavages of two C-H bonds and one C-N bond to give 9-arylacridine derivatives. This kind of acridines is of interest due to their biological properties and their unique optical and electro- and photochemical properties. Some of obtained acridine derivatives exhibit intense fluorescence in the solid state. PMID:25196267

  4. Identification of the Chemical Bonding Prompting Adhesion of a-C:H Thin Films on Ferrous Alloy Intermediated by a SiCx:H Buffer Layer.

    PubMed

    Cemin, F; Bim, L T; Leidens, L M; Morales, M; Baumvol, I J R; Alvarez, F; Figueroa, C A

    2015-07-29

    Amorphous carbon (a-C) and several related materials (DLCs) may have ultralow friction coefficients that can be used for saving-energy applications. However, poor chemical bonding of a-C/DLC films on metallic alloys is expected, due to the stability of carbon-carbon bonds. Silicon-based intermediate layers are employed to enhance the adherence of a-C:H films on ferrous alloys, although the role of such buffer layers is not yet fully understood in chemical terms. The chemical bonding of a-C:H thin films on ferrous alloy intermediated by a nanometric SiCx:H buffer layer was analyzed by X-ray photoelectron spectroscopy (XPS). The chemical profile was inspected by glow discharge optical emission spectroscopy (GDOES), and the chemical structure was evaluated by Raman and Fourier transform infrared spectroscopy techniques. The nature of adhesion is discussed by analyzing the chemical bonding at the interfaces of the a-C:H/SiCx:H/ferrous alloy sandwich structure. The adhesion phenomenon is ascribed to specifically chemical bonding character at the buffer layer. Whereas carbon-carbon (C-C) and carbon-silicon (C-Si) bonds are formed at the outermost interface, the innermost interface is constituted mainly by silicon-iron (Si-Fe) bonds. The oxygen presence degrades the adhesion up to totally delaminate the a-C:H thin films. The SiCx:H deposition temperature determines the type of chemical bonding and the amount of oxygen contained in the buffer layer.

  5. Catalytic C-H bond activation at nanoscale Lewis acidic aluminium fluorides: H/D exchange reactions at aromatic and aliphatic hydrocarbons.

    PubMed

    Prechtl, Martin H G; Teltewskoi, Michael; Dimitrov, Anton; Kemnitz, Erhard; Braun, Thomas

    2011-12-16

    Nanoscopic amorphous Lewis acidic aluminium fluorides, such as aluminium chlorofluoride (ACF) and high-surface aluminium fluoride (HS-AlF(3)), are capable of activating C-H bonds of aliphatic hydrocarbons. H/D exchange reactions are catalysed under mild conditions (40 °C).

  6. AgNO2-mediated direct nitration of the quinoxaline tertiary benzylic C-H bond and direct conversion of 2-methyl quinoxalines into related nitriles.

    PubMed

    Wu, Degui; Zhang, Jian; Cui, Jianhai; Zhang, Wei; Liu, Yunkui

    2014-09-25

    A unique method for AgNO2-mediated direct nitration of the quinoxaline tertiary C-H bond and direct conversion of 2-methyl quinoxalines into 2-quinoxaline nitriles under oxidative conditions has been developed. This protocol provides an efficient way to access quinoxaline containing nitroalkanes and nitriles depending on different substrate selection.

  7. Ruthenium-porphyrin-catalyzed diastereoselective intramolecular alkyl carbene insertion into C-H bonds of alkyl diazomethanes generated in situ from N-tosylhydrazones.

    PubMed

    Reddy, Annapureddy Rajasekar; Zhou, Cong-Ying; Guo, Zhen; Wei, Jinhu; Che, Chi-Ming

    2014-12-15

    With a ruthenium-porphyrin catalyst, alkyl diazomethanes generated in situ from N-tosylhydrazones efficiently underwent intramolecular C(sp(3))-H insertion of an alkyl carbene to give substituted tetrahydrofurans and pyrrolidines in up to 99% yield and with up to 99:1 cis selectivity. The reaction displays good tolerance of many functionalities, and the procedure is simple without the need for slow addition with a syringe pump. From a synthetic point of view, the C-H insertion of N-tosylhydrazones can be viewed as reductive coupling between a C=O bond and a C-H bond to form a new C-C bond, since N-tosylhydrazones can be readily prepared from carbonyl compounds. This reaction was successfully applied in a concise synthesis of (±)-pseudoheliotridane.

  8. C-H⋯O Hydrogen Bonded Complexes Between Chloroform and Cyclic Ketones: Correlation of Spectral Shifts and Complex Stability with Ring Size

    NASA Astrophysics Data System (ADS)

    Mukhopadhyay, Anamika; Chakraborty, Tapas

    2010-06-01

    Stable C-H⋯O hydrogen bonded complexes between choloroform and three small cyclic ketones (cyclohexanone, cyclopentanone, cyclobutanone) are identified by use of FTIR spectroscopy in CCl4 solution at room temperature. The C-H stretching fundamental of chloroform (νC-H) in the said three complexes exhibits blue shifting with enhancement in νC-H transition intensity. However, the red shifts of the νC=O bands of the cyclic ketones in the complexes show no apparent correlation with the corresponding blue shifts of νC-H. The spectral analysis reveals that the stability of the complexes decreases with the ring size of the cyclic ketones. Electronic structure calculation at DFT/B3LYP/6-311++G(d,p) and MP2/6-31+G(d) levels predict that the complex binding energies are correlated with the dipole moment, proton affinity, and n(O)→σ∗(C-H) hyperconjugative charge transfer ability of the cyclic ketones.

  9. A Metallacycle Fragmentation Strategy for Vinyl Transfer from Enol Carboxylates to Secondary Alcohol C-H Bonds via Osmium- or Ruthenium-Catalyzed Transfer Hydrogenation.

    PubMed

    Park, Boyoung Y; Luong, Tom; Sato, Hiroki; Krische, Michael J

    2015-06-24

    A strategy for catalytic vinyl transfer from enol carboxylates to activated secondary alcohol C-H bonds is described. Using XPhos-modified ruthenium(0) or osmium(0) complexes, enol carboxylate-carbonyl oxidative coupling forms transient β-acyloxy-oxametallacycles, which eliminate carboxylate to deliver allylic ruthenium(II) or osmium(II) alkoxides. Reduction of the metal(II) salt via hydrogen transfer from the secondary alcohol reactant releases the product of carbinol C-H vinylation and regenerates ketone and zero-valent catalyst.

  10. Intramolecular C-H bond activation and redox isomerization across two-electron mixed valence diiridium cores.

    SciTech Connect

    Esswein, A. J.; Veige, A. S.; Piccoli, P. M. B.; Schultz, A. J.; Nocera, D. G.; MIT

    2008-03-24

    Metal-metal cooperativity enables the reaction of carbon-based substrates at diiridium two-electron mixed valence centers. Arylation of Ir{sub 2}{sup 0,II}(tfepma){sub 3}Cl{sub 2} (1) (tfepma = bis[(bistrifluoroethoxy)phosphino]methylamine) with RMgBr (R = C{sub 6}H{sub 5} and C{sub 6}D{sub 5}) is followed by C-H bond activation to furnish the bridging benzyne complex Ir{sub 2}II,II(tfepma){sub 3}({mu}-C{sub 6}H4)(C{sub 6}H{sub 5})H (2), as the kinetic product. At ambient temperature, 2 isomerizes to Ir{sub 2}{sup I,III}(tfepma){sub 3}({mu}-C{sub 6}H4)(C{sub 6}H{sub 5})H (3) (k{sub obs} = 9.57 {+-} 0.10 x 10{sup -5} s{sup -1} at 31.8 C, {Delta}H{sup {+-}} = 21.7 {+-} 0.3 kcal/mol, {Delta}S{sup {+-}} = -7.4 {+-} 0.9 eu), in which the benzyne moiety is conserved and the Ir{sup III} center is ligated by terminal hydride and phenyl groups. The same reaction course is observed for arylation of 1 with C{sub 6}D{sub 5}MgBr to produce 2-d{sub 10} and 3-d{sub 10} accompanied by an inverse isotope effect, k{sub h}/k{sub d} = 0.44 (k{sub obs} = 2.17 {+-} 0.10 x 10{sup -4} s{sup -1} in C{sub 6}D{sub 6} solution at 31.8 C, {Delta}H{sup {+-}} = 24.9 {+-} 0.7 kcal/mol, {Delta}S{sup {+-}} = -6.4 {+-} 2.4 eu). 2 reacts swiftly with hydrogen to provide Ir{sub 2}{sup II,II}(tfepma){sub 3}H{sub 4} as both the syn and anti isomers (4-syn and 4-anti, respectively). The hydrides of 4-syn were directly located by neutron diffraction analysis. X-ray crystallographic examination of 2, 2-d{sub 10}, 3, and 4-syn indicates that cooperative reactivity at the bimetallic diiridium core is facilitated by the ability of the two-electron mixed valence framework to accommodate the oxidation state changes and ligand rearrangements attendant to the reaction of the substrate.

  11. Infrared Spectroscopic Investigation of the Acidic CH Bonds in Cationic n-Alkanes: Pentane, Hexane, and Heptane.

    PubMed

    Xie, Min; Matsuda, Yoshiyuki; Fujii, Asuka

    2016-08-18

    Radical cations of n-alkanes (pentane, hexane, and heptane) in the gas phase are investigated by infrared predissociation spectroscopy with the argon or nitrogen tagging. All-trans and gauche-involving conformers are identified for these cations by comparisons of observed infrared spectra and vibrational simulations. Intense CH stretch bands are observed in the frequency region lower than the normal alkyl CH stretch frequency. These low frequencies and high intensities of the CH stretch bands are caused by the CH bond weakening and the enhanced positive charge of the hydrogen atoms through the delocalization of the σ electron in the CH bonds. These effects of the delocalization of the σ electron result in the enhanced acidity of the CH bonds. The conformation as well as alkyl chain length dependence of the acidity of the CH bonds is demonstrated by the CH stretch frequency shift trend. PMID:27467194

  12. Infrared and Raman spectroscopy and quantum chemistry calculation studies of C H⋯O hydrogen bondings and thermal behavior of biodegradable polyhydroxyalkanoate

    NASA Astrophysics Data System (ADS)

    Sato, Harumi; Dybal, Jiří; Murakami, Rumi; Noda, Isao; Ozaki, Yukihiro

    2005-06-01

    This review paper reports infrared (IR) and Raman spectroscopy and quantum chemistry calculation studies of C-H⋯O hydrogen bondings and thermal behavior of biodegradable polyhydroxyalkanoates. IR and Raman spectra were measured for poly(3-hydroxybutyrate) (PHB) and a new type of bacterial copolyester, poly(3-hydroxybutyrate- co-3-hydroxyhexanoate), P(HB- co-HHx) (HHx=12 mol%) over a temperature range of 20 °C to higher temperatures (PHB, 200 °C; HHx=12 mol%, 140 °C) to explore their structure and thermal behavior. One of bands due to the CH 3 asymmetric stretching modes appears near 3010 cm -1 in the IR and Raman spectra of PHB and P(HB- co-HHx) at 20 °C. These frequencies of IR and Raman CH 3 asymmetric stretching bands are much higher than usual. These anomalous frequencies of the CH 3 asymmetric stretching bands together with the X-ray crystallographic structure of PHB have suggested that there is an inter- or intra-molecular C-H⋯O hydrogen bond between the C dbnd6 O group in one helical structure and the CH 3 group in the other helical structure in PHB and P(HB- co-HHx). The quantum chemical calculation of model compounds of PHB also has suggested the existence of C-H⋯O hydrogen bonds in PHB and P(HB- co-HHx). It is very likely that a chain of C-H⋯O hydrogen bond pairs link two parallel helical structures in the crystalline parts. The temperature-dependent IR and Raman spectral variations have revealed that the crystallinity of P(HB- co-HHx) (HHx=12 mol%) decreases gradually from a fairly low temperature (about 60 °C), while the crystallinity of PHB remains almost unchanged until just below its melting temperature. It has also been found from the IR and Raman studies that for both PHB and P(HB- co-HHx) the weakening of the C-H⋯O hydrogen bonds starts from just above room temperature, but the deformation of helical structures occurs after the weakening of the C-H⋯O hydrogen bonds advances to some extent.

  13. Synthesis, structure, and C-H bond activation chemistry of ([eta][sup 6]-arene)Ru(H)[sub 2](SiMe[sub 3])[sub 2] complexes

    SciTech Connect

    Djurovich, P.I.; Carroll, P.J.; Berry, D.H. )

    1994-07-01

    The ([eta][sup 6]-arene)Ru(H)[sub 2](SiMe[sub 3])[sub 2] arene = C[sub 6]-Me[sub 6] (1a), p-cymene (1b), C[sub 6]H[sub 6] (1c) complexes have been prepared and characterized. The complexes activate both aromatic and aliphatic C-H bonds and catalyze H/D exchange in alkylsilanes upon thermolysis in benzene-d[sub 6]. A mechanism based on oxidative-addition/reductive-elimination steps which utilizes a Ru(II)-Ru(IV) cycle is proposed to account for the C-H bond activation and H/D exchange reactions. It is further proposed that H/D exchange into sites adjacent to silicon in alkylsilanes is due to the intermediacy of an [eta][sup 2]-silene complex generated by [beta]-hydrogen elimination from the silyl group. 19 refs., 1 fig.

  14. Synthesis of ferrocene derivatives with planar chirality via palladium-catalyzed enantioselective C-H bond activation.

    PubMed

    Pi, Chao; Cui, Xiuling; Liu, Xiuyan; Guo, Mengxing; Zhang, Hanyu; Wu, Yangjie

    2014-10-01

    The first catalytic and enantioselective C-H direct acylation of ferrocene derivatives has been developed. A series of 2-acyl-1-dimethylaminomethylferrocenes with planar chirality were provided under highly efficient and concise one-pot conditions with up to 85% yield and 98% ee. The products obtained could be easily converted to various chiral ligands via diverse transformations.

  15. Iodine-catalyzed [Formula: see text] C-H bond activation by selenium dioxide: synthesis of diindolylmethanes and di(3-indolyl)selanides.

    PubMed

    Naidu, P Seetham; Majumder, Swarup; Bhuyan, Pulak J

    2015-11-01

    An efficient reaction protocol was developed for the synthesis of several diindolylmethane derivatives via the [Formula: see text] C-H bond activation of aryl methyl ketones by [Formula: see text] and indoles in the presence of catalytic amounts of [Formula: see text] at 80 [Formula: see text] using dioxane as solvent. Unexpectedly, an interesting class of di(3-indolyl)selenide compounds was isolated when the reaction was carried out at room temperature.

  16. Cyclometallation of arylimines and nitrogen-containing heterocycles via room-temperature C-H bond activation with arene ruthenium(II) acetate complexes.

    PubMed

    Li, Bin; Roisnel, Thierry; Darcel, Christophe; Dixneuf, Pierre H

    2012-08-28

    The reaction of [RuCl(2)(p-cymene)](2) with arylimines and 4 equiv. of KOAc in methanol at room temperature produces stable (N^C)-cyclometallated ruthenium(II) complexes via C-H bond activation/deprotonation. This method can be applied also to nitrogen-containing molecules: N-phenylpyrazole, 2-phenyl-2-oxazoline and benzo[h]quinoline. N-Phenyl-pyrazole, [RuCl(2)(p-cymene)](2) and diphenylacetylene directly lead to alkyne insertion into the metallacycle C-Ru bond. PMID:22890507

  17. Promotional effects of chemisorbed oxygen and hydroxide in the activation of C-H and O-H bonds over transition metal surfaces

    NASA Astrophysics Data System (ADS)

    Hibbitts, David; Neurock, Matthew

    2016-08-01

    Electronegative coadsorbates such as atomic oxygen (O*) and hydroxide (OH*) can act as Brønsted bases when bound to Group 11 as well as particular Group 8-10 metal surfaces and aid in the activation of X-H bonds. First-principle density functional theory calculations were carried out to systematically explore the reactivity of the C-H bonds of methane and surface methyl intermediates as well as the O-H bond of methanol directly and with the assistance of coadsorbed O* and OH* intermediates over Group 11 (Cu, Ag, and Au) and Group 8-10 transition metal (Ru, Rh, Pd, Os, Ir, and Pt) surfaces. C-H as well as O-H bond activation over the metal proceeds via a classic oxidative addition type mechanism involving the insertion of the metal center into the C-H or O-H bond. O* and OH* assist C-H and O-H activation over particular Group 11 and Group 8-10 metal surfaces via a σ-bond metathesis type mechanism involving the oxidative addition of the C-H or O-H bond to the metal along with a reductive deprotonation of the acidic C-H and O-H bond over the M-O* or M-OH* site pair. The O*- and OH*-assisted C-H activation paths are energetically preferred over the direct metal catalyzed C-H scission for all Group 11 metals (Cu, Ag, and Au) with barriers that are 0.4-1.5 eV lower than those for the unassisted routes. The barriers for O*- and OH*-assisted C-H activation of CH4 on the Group 8-10 transition metals, however, are higher than those over the bare transition metal surfaces by as much as 1.4 eV. The C-H activation of adsorbed methyl species show very similar trends to those for CH4 despite the differences in structure between the weakly bound methane and the covalently adsorbed methyl intermediates. The activation of the O-H bond of methanol is significantly promoted by O* as well as OH* intermediates over both the Group 11 metals (Cu, Ag, and Au) as well as on all Group 8-10 metals studied (Ru, Rh, Pd, Os, Ir, and Pt). The O*- and OH*-assisted CH3O-H barriers are 0.6 to 2

  18. Activation of C-H Bonds in Pt(+) + x CH4 Reactions, where x = 1-4: Identification of the Platinum Dimethyl Cation.

    PubMed

    Wheeler, Oscar W; Salem, Michelle; Gao, Amanda; Bakker, Joost M; Armentrout, P B

    2016-08-11

    Activation of C-H bonds in the sequential reactions of Pt(+) + x(CH4/CD4), where x = 1-4, have been investigated using infrared multiple photon dissociation (IRMPD) spectroscopy and theoretical calculations. Pt(+) cations are formed by laser ablation and exposed to controlled amounts of CH4/CD4 leading to [Pt,xC,(4x-2)H/D](+) dehydrogenation products. Irradiation of these products in the 400-2100 cm(-1) range leads to CH4/CD4 loss from the x = 3 and 4 products, whereas PtCH2(+)/PtCD2(+) products do not decompose at all, and x = 2 products dissociate only when formed from a higher order product. The structures of these complexes were explored theoretically at several levels of theory with three different basis sets. Comparison of the experimental and theoretical results indicate that the species formed have a Pt(CH3)2(+)(CH4)x-2/Pt(CD3)2(+)(CD4)x-2 binding motif for x = 2-4. Thus, reaction of Pt(+) with methane occurs by C-H bond activation to form PtCH2(+), which reacts with an additional methane molecule by C-H bond activation to form the platinum dimethyl cation. This proposed reaction mechanism is consistent with theoretical explorations of the potential energy surface for reactions of Pt(+) with one and two methane molecules. PMID:27438025

  19. Activation of C-H Bonds in Pt(+) + x CH4 Reactions, where x = 1-4: Identification of the Platinum Dimethyl Cation.

    PubMed

    Wheeler, Oscar W; Salem, Michelle; Gao, Amanda; Bakker, Joost M; Armentrout, P B

    2016-08-11

    Activation of C-H bonds in the sequential reactions of Pt(+) + x(CH4/CD4), where x = 1-4, have been investigated using infrared multiple photon dissociation (IRMPD) spectroscopy and theoretical calculations. Pt(+) cations are formed by laser ablation and exposed to controlled amounts of CH4/CD4 leading to [Pt,xC,(4x-2)H/D](+) dehydrogenation products. Irradiation of these products in the 400-2100 cm(-1) range leads to CH4/CD4 loss from the x = 3 and 4 products, whereas PtCH2(+)/PtCD2(+) products do not decompose at all, and x = 2 products dissociate only when formed from a higher order product. The structures of these complexes were explored theoretically at several levels of theory with three different basis sets. Comparison of the experimental and theoretical results indicate that the species formed have a Pt(CH3)2(+)(CH4)x-2/Pt(CD3)2(+)(CD4)x-2 binding motif for x = 2-4. Thus, reaction of Pt(+) with methane occurs by C-H bond activation to form PtCH2(+), which reacts with an additional methane molecule by C-H bond activation to form the platinum dimethyl cation. This proposed reaction mechanism is consistent with theoretical explorations of the potential energy surface for reactions of Pt(+) with one and two methane molecules.

  20. Theoretical studies for Lewis acid-base interactions and C-H...O weak hydrogen bonding in various CO2 complexes.

    PubMed

    Kim, Kyung Hyun; Kim, Yongho

    2008-02-21

    Comprehension of the basic concepts for the design of CO2-philic molecules is important due to the possibility for "green" chemistry in supercritical CO2 of substitute solvent systems. Lewis acid-base interactions and C-H...O weak hydrogen bonding were suggested as two key factors in the solubility of CO2-philic molecules. To isolate the stabilization energy of weak hydrogen bonding from the overall binding energy, high-level quantum mechanical calculations were performed for the van der Waals complexes of CO2 with methane, methylacetate, dimethylether, acetaldehyde, and 1,2-dimethoxyethane. Structures and energies were calculated at the MP2 level of theory using the 6-31+G(d) and aug-cc-pVDZ basis sets with basis set superposition error corrections. In addition, the single-point energies were calculated using recently developed multilevel methods. This study shows that the Lewis acid-base interaction has a significant impact on the complex stability compared to the C-H...O weak hydrogen bond. The additional stabilization energy of the cooperative weak hydrogen bond with alpha-proton of the carbonyl group was negligible on the enhancement of supercritical CO2 solubility. However, the stabilization energy was larger for the ether group, such that it may have an important role in increasing the supercritical CO2 solubility. Additional formation of cooperative weak hydrogen bonds may not further increase the solubility due to the stability reduction by steric hindrance.

  1. Computationally efficient methodology to calculate C-H and C-X (X = F, Cl, and Br) bond dissociation energies in haloalkanes

    SciTech Connect

    McGivern, W.S.; Derecskei-Kovacs, A.; North, S.W.; Francisco, J.S.

    2000-01-20

    A computationally efficient method for calculating C-H and C-X (X = F, Cl, and Br) bond dissociation energies in haloalkanes has been developed by determining correction factors to MP2/cc-pVtz energies. Corrections for basis set effects were determined by the difference in bond dissociation energies calculated at the MP2/cc-pVtz and MP2/cc-pV5z levels, and correlation effects were corrected by calculating the difference in energies at the MP2/cc-pVtz and CCSD(T)/cc-pVtz levels. Subsequent corrections for the spin-orbit energy of the atomic fragment and zero-point energy were applied to give a final bond dissociation energy. The correction factors were determined using CH{sub 4}, CH{sub 3}F, CH{sub 3}Cl, and CH{sub 3}Br and are found to yield bond dissociation energies in excellent agreement with experimental results. This correction may also be broadly applied to multihalogen compounds, as shown in calculations of the C-H and C-X bond dissociation energies of CH{sub 2}X{sub 2} and CHX{sub 3} (X = F, Cl, and Br) compounds, which accurately reproduce experimental values.

  2. Transition-metal-catalyzed C-N bond forming reactions using organic azides as the nitrogen source: a journey for the mild and versatile C-H amination.

    PubMed

    Shin, Kwangmin; Kim, Hyunwoo; Chang, Sukbok

    2015-04-21

    Owing to the prevalence of nitrogen-containing compounds in functional materials, natural products and important pharmaceutical agents, chemists have actively searched for the development of efficient and selective methodologies allowing for the facile construction of carbon-nitrogen bonds. While metal-catalyzed C-N cross-coupling reactions have been established as one of the most general protocols for C-N bond formation, these methods require starting materials equipped with functional groups such as (hetero)aryl halides or their equivalents, thus generating stoichiometric amounts of halide salts as byproducts. To address this aspect, a transition-metal-catalyzed direct C-H amination approach has emerged as a step- and atom-economical alternative to the conventional C-N cross-coupling reactions. However, despite the significant recent advances in metal-mediated direct C-H amination reactions, most available procedures need harsh conditions requiring stoichiometric external oxidants. In this context, we were curious to see whether a transition-metal-catalyzed mild C-H amination protocol could be achieved using organic azides as the amino source. We envisaged that a dual role of organic azides as an environmentally benign amino source and also as an internal oxidant via N-N2 bond cleavage would be key to develop efficient C-H amination reactions employing azides. An additional advantage of this approach was anticipated: that a sole byproduct is molecular nitrogen (N2) under the perspective catalytic conditions. This Account mainly describes our research efforts on the development of rhodium- and iridium-catalyzed direct C-H amination reactions with organic azides. Under our initially optimized Rh(III)-catalyzed amination conditions, not only sulfonyl azides but also aryl- and alkyl azides could be utilized as facile amino sources in reaction with various types of C(sp(2))-H bonds bearing such directing groups as pyridine, amide, or ketoxime. More recently, a new

  3. Troponate/Aminotroponate Ruthenium-Arene Complexes: Synthesis, Structure, and Ligand-Tuned Mechanistic Pathway for Direct C-H Bond Arylation with Aryl Chlorides in Water.

    PubMed

    Dwivedi, Ambikesh D; Binnani, Chinky; Tyagi, Deepika; Rawat, Kuber S; Li, Pei-Zhou; Zhao, Yanli; Mobin, Shaikh M; Pathak, Biswarup; Singh, Sanjay K

    2016-07-01

    A series of water-soluble troponate/aminotroponate ruthenium(II)-arene complexes were synthesized, where O,O and N,O chelating troponate/aminotroponate ligands stabilized the piano-stool mononuclear ruthenium-arene complexes. Structural identities for two of the representating complexes were also established by single-crystal X-ray diffraction studies. These newly synthesized troponate/aminotroponate ruthenium-arene complexes enable efficient C-H bond arylation of arylpyridine in water. The unique structure-activity relationship in these complexes is the key to achieve efficient direct C-H bond arylation of arylpyridine. Moreover, the steric bulkiness of the carboxylate additives systematically directs the selectivity toward mono- versus diarylation of arylpyridines. Detailed mechanistic studies were performed using mass-spectral studies including identification of several key cyclometalated intermediates. These studies provided strong support for an initial cycloruthenation driven by carbonate-assisted deprotonation of 2-phenylpyridine, where the relative strength of η(6)-arene and the troponate/aminotroponate ligand drives the formation of cyclometalated 2-phenylpyridine Ru-arene species, [(η(6)-arene)Ru(κ(2)-C,N-phenylpyridine) (OH2)](+) by elimination of troponate/aminotroponate ligands and retaining η(6)-arene, while cyclometalated 2-phenylpyridine Ru-troponate/aminotroponate species [(κ (2)-troponate/aminotroponate)Ru(κ(2)-C,N-phenylpyridine)(OH2)2] was generated by decoordination of η(6)-arene ring during initial C-H bond activation of 2-phenylpyridine. Along with the experimental mass-spectral evidence, density functional theory calculation also supports the formation of such species for these complexes. Subsequently, these cycloruthenated products activate aryl chloride by facile oxidative addition to generate C-H arylated products. PMID:27305143

  4. Troponate/Aminotroponate Ruthenium-Arene Complexes: Synthesis, Structure, and Ligand-Tuned Mechanistic Pathway for Direct C-H Bond Arylation with Aryl Chlorides in Water.

    PubMed

    Dwivedi, Ambikesh D; Binnani, Chinky; Tyagi, Deepika; Rawat, Kuber S; Li, Pei-Zhou; Zhao, Yanli; Mobin, Shaikh M; Pathak, Biswarup; Singh, Sanjay K

    2016-07-01

    A series of water-soluble troponate/aminotroponate ruthenium(II)-arene complexes were synthesized, where O,O and N,O chelating troponate/aminotroponate ligands stabilized the piano-stool mononuclear ruthenium-arene complexes. Structural identities for two of the representating complexes were also established by single-crystal X-ray diffraction studies. These newly synthesized troponate/aminotroponate ruthenium-arene complexes enable efficient C-H bond arylation of arylpyridine in water. The unique structure-activity relationship in these complexes is the key to achieve efficient direct C-H bond arylation of arylpyridine. Moreover, the steric bulkiness of the carboxylate additives systematically directs the selectivity toward mono- versus diarylation of arylpyridines. Detailed mechanistic studies were performed using mass-spectral studies including identification of several key cyclometalated intermediates. These studies provided strong support for an initial cycloruthenation driven by carbonate-assisted deprotonation of 2-phenylpyridine, where the relative strength of η(6)-arene and the troponate/aminotroponate ligand drives the formation of cyclometalated 2-phenylpyridine Ru-arene species, [(η(6)-arene)Ru(κ(2)-C,N-phenylpyridine) (OH2)](+) by elimination of troponate/aminotroponate ligands and retaining η(6)-arene, while cyclometalated 2-phenylpyridine Ru-troponate/aminotroponate species [(κ (2)-troponate/aminotroponate)Ru(κ(2)-C,N-phenylpyridine)(OH2)2] was generated by decoordination of η(6)-arene ring during initial C-H bond activation of 2-phenylpyridine. Along with the experimental mass-spectral evidence, density functional theory calculation also supports the formation of such species for these complexes. Subsequently, these cycloruthenated products activate aryl chloride by facile oxidative addition to generate C-H arylated products.

  5. Direct Synthesis of Protoberberine Alkaloids by Rh-Catalyzed C-H Bond Activation as the Key Step.

    PubMed

    Jayakumar, Jayachandran; Cheng, Chien-Hong

    2016-01-26

    A one-pot reaction of substituted benzaldehydes with alkyne-amines by a Rh-catalyzed C-H activation and annulation to afford various natural and unnatural protoberberine alkaloids is reported. This reaction provides a convenient route for the generation of a compound library of protoberberine salts, which recently have attracted great attention because of their diverse biological activities. In addition, pyridinium salt derivatives can also be formed in good yields from α,β-unsaturated aldehydes and amino-alkynes. This reaction proceeds with excellent regioselectivity and good functional group compatibility under mild reaction conditions by using O2 as the oxidant. PMID:26689172

  6. Direct Synthesis of Protoberberine Alkaloids by Rh-Catalyzed C-H Bond Activation as the Key Step.

    PubMed

    Jayakumar, Jayachandran; Cheng, Chien-Hong

    2016-01-26

    A one-pot reaction of substituted benzaldehydes with alkyne-amines by a Rh-catalyzed C-H activation and annulation to afford various natural and unnatural protoberberine alkaloids is reported. This reaction provides a convenient route for the generation of a compound library of protoberberine salts, which recently have attracted great attention because of their diverse biological activities. In addition, pyridinium salt derivatives can also be formed in good yields from α,β-unsaturated aldehydes and amino-alkynes. This reaction proceeds with excellent regioselectivity and good functional group compatibility under mild reaction conditions by using O2 as the oxidant.

  7. New techniques for the measurement of C'N and C'H(N) J coupling constants across hydrogen bonds in proteins.

    PubMed

    Meissner, A; Sorensen, O W

    2000-04-01

    Two new two- or three-dimensional NMR methods for measuring (3h)J(C'N) and (2h)J(C'H) coupling constants across hydrogen bonds in proteins are presented. They are tailored to suit the size of the TROSY effect, i.e., the degree of interference between dipolar and chemical shift anisotropy relaxation mechanisms. The methods edit 2D or 3D spectra into two separate subspectra corresponding to the two possible spin states of the (1)H(N) spin during evolution of (13)CO coherences. This allows (2h)J(C'H) to be measured in an E.COSY-type way while (3h)J(C'N) can be measured in the so-called quantitative way provided a reference spectrum is also recorded. A demonstration of the new methods is shown for the (15)N,(13)C-labeled protein chymotrypsin inhibitor 2.

  8. Copper-catalyzed trifluoromethylation of internal olefinic C-H bonds: efficient routes to trifluoromethylated tetrasubstituted olefins and N-heterocycles.

    PubMed

    Mao, Zhifeng; Huang, Fei; Yu, Haifeng; Chen, Jiping; Yu, Zhengkun; Xu, Zhaoqing

    2014-03-17

    The functionalization of internal olefins has been a challenging task in organic synthesis. Efficient CuII-catalyzed trifluoromethylation of internal olefins, that is, α-oxoketene dithioacetals, has been achieved by using Cu(OH)2 as a catalyst and TMSCF3 as a trifluoromethylating reagent. The push-pull effect from the polarized olefin substrates facilitates the internal olefinic C-H trifluoromethylation. Cyclic and acyclic dithioalkyl α-oxoketene acetals were used as the substrates and various substituents were tolerated. The internal olefinic C-H bond cleavage was not involved in the rate-determining step, and a mechanism that involves radicals is proposed based on a TEMPO-quenching experiment of the trifluoromethylation reaction. Further derivatization of the resultant CF3 olefins led to multifunctionalized tetrasubstituted CF3 olefins and trifluoromethylated N-heterocycles. PMID:24677229

  9. Ruthenium-Catalyzed Oxidative Coupling of Primary Amines with Internal Alkynes through C-H Bond Activation: Scope and Mechanistic Studies.

    PubMed

    Ruiz, Sara; Villuendas, Pedro; Ortuño, Manuel A; Lledós, Agustí; Urriolabeitia, Esteban P

    2015-06-01

    The oxidative coupling of primary amines with internal alkynes catalyzed by Ru complexes is presented as a general atom-economy methodology with a broad scope of applications in the synthesis of N-heterocycles. Reactions proceed through regioselective C-H bond activation in 15 minutes under microwave irradiation or in 24 hours with conventional heating. The synthesis of 2,3,5-substituted pyridines, benzo[h]isoquinolines, benzo[g]isoquinolines, 8,9-dihydro-benzo[de]quinoline, 5,6,7,8-tetrahydroisoquinolines, pyrido[3,4g]isoquinolines, and pyrido[4,3g]isoquinolines is achievable depending on the starting primary amine used. DFT calculations on a benzylamine substrate support a reaction mechanism that consists of acetate-assisted C-H bond activation, migratory-insertion, and C-N bond formation steps that involve 28-30 kcal mol(-1) . The computational study is extended to additional substrates, namely, 1-naphthylmethyl-, 2-methylallyl-, and 2-thiophenemethylamines.

  10. Ruthenium-Catalyzed Oxidative Coupling of Primary Amines with Internal Alkynes through C-H Bond Activation: Scope and Mechanistic Studies.

    PubMed

    Ruiz, Sara; Villuendas, Pedro; Ortuño, Manuel A; Lledós, Agustí; Urriolabeitia, Esteban P

    2015-06-01

    The oxidative coupling of primary amines with internal alkynes catalyzed by Ru complexes is presented as a general atom-economy methodology with a broad scope of applications in the synthesis of N-heterocycles. Reactions proceed through regioselective C-H bond activation in 15 minutes under microwave irradiation or in 24 hours with conventional heating. The synthesis of 2,3,5-substituted pyridines, benzo[h]isoquinolines, benzo[g]isoquinolines, 8,9-dihydro-benzo[de]quinoline, 5,6,7,8-tetrahydroisoquinolines, pyrido[3,4g]isoquinolines, and pyrido[4,3g]isoquinolines is achievable depending on the starting primary amine used. DFT calculations on a benzylamine substrate support a reaction mechanism that consists of acetate-assisted C-H bond activation, migratory-insertion, and C-N bond formation steps that involve 28-30 kcal mol(-1) . The computational study is extended to additional substrates, namely, 1-naphthylmethyl-, 2-methylallyl-, and 2-thiophenemethylamines. PMID:25916684

  11. Mechanochemical Iridium(III)-Catalyzed C-H Bond Amidation of Benzamides with Sulfonyl Azides under Solvent-Free Conditions in a Ball Mill.

    PubMed

    Hermann, Gary N; Becker, Peter; Bolm, Carsten

    2016-03-01

    Mechanochemical conditions have been applied to an iridium(III)-catalyzed C-H bond amidation process for the first time. In the absence of solvent, the mechanochemical activation enables the formation of an iridium species that catalyzes the ortho-selective amidation of benzamides with sulfonyl azides as the nitrogen source. As the reaction proceeds in the absence of organic solvents without external heating and yields the desired products in excellent yields within short reaction times, this method constitutes a powerful, fast, and environmentally benign alternative to the common solvent-based standard approaches.

  12. A Cobalt(I) Pincer Complex with an η(2) -C(aryl)-H Agostic Bond: Facile C-H Bond Cleavage through Deprotonation, Radical Abstraction, and Oxidative Addition.

    PubMed

    Murugesan, Sathiyamoorthy; Stöger, Berthold; Pittenauer, Ernst; Allmaier, Günter; Veiros, Luis F; Kirchner, Karl

    2016-02-24

    The synthesis and reactivity of a Co(I) pincer complex [Co(ϰ(3) P,CH,P-P(CH)P(NMe) -iPr)(CO)2](+) featuring an η(2)-C(aryl)-H agostic bond is described. This complex was obtained by protonation of the Co(I) complex [Co(PCP(NMe) -iPr)(CO)2]. The Co(III) hydride complex [Co(PCP(NMe) -iPr)(CNtBu)2(H)](+) was obtained upon protonation of [Co(PCP(NMe) -iPr)(CNtBu)2]. Three ways to cleave the agostic C-H bond are presented. First, owing to the acidity of the agostic proton, treatment with pyridine results in facile deprotonation (C-H bond cleavage) and reformation of [Co(PCP(NMe) -iPr)(CO)2]. Second, C-H bond cleavage is achieved upon exposure of [Co(ϰ(3)P,CH,P-P(CH)P(NMe) -iPr)(CO)2](+) to oxygen or TEMPO to yield the paramagnetic Co(II) PCP complex [Co(PCP(NMe) -iPr)(CO)2](+). Finally, replacement of one CO ligand in [Co(ϰ(3) P,CH,P-P(CH)P(NMe) -iPr)(CO)2](+) by CNtBu promotes the rapid oxidative addition of the agostic η(2) -C(aryl)-H bond to give two isomeric hydride complexes of the type [Co(PCP(NMe) -iPr)(CNtBu)(CO)(H)](+).

  13. Rhodium-catalyzed annulative coupling of 3-phenylthiophenes with alkynes involving double C-H bond cleavages.

    PubMed

    Iitsuka, Tomonori; Hirano, Koji; Satoh, Tetsuya; Miura, Masahiro

    2014-01-01

    Double CH bond activation took place efficiently upon treatment of 3-phenylthiophenes with alkynes in the presence of a rhodium catalyst and a copper salt oxidant to form the corresponding naphthothiophene derivatives. Dehydrogenative coupling with alkenes was also found to occur on the phenyl moiety rather than the thiophene ring. These reactions provide straightforward synthetic methods for π-conjugated molecules involving a thiophene unit from readily available, simple building blocks. PMID:24288235

  14. Rh(III)-catalyzed relay carbenoid functionalization of aromatic C-H bonds: access to π-conjugated fused heteroarenes.

    PubMed

    Xie, Ying; Chen, Xun; Liu, Xin; Su, Shi-Jian; Li, Jianzhang; Zeng, Wei

    2016-04-30

    A novel Rh(III)-catalyzed relay cross-coupling/cyclization cascade between arylketoimines and diazoesters is described. This transformation provides a concise access to unique π-conjugated 1-azaphenalenes (1-APLEs) via a double aryl Csp(2)-H bond carbenoid functionalization process. As illustrative examples, the 1-APLE-based π-conjugated molecules which possess low-lying HOMO levels could be converted to promising organic optoelectronic materials. PMID:27048944

  15. Evidence for the existence of terminal scandium imidos: mechanistic studies involving imido-scandium bond formation and C-H activation reactions.

    PubMed

    Wicker, Benjamin F; Fan, Hongjun; Hickey, Anne K; Crestani, Marco G; Scott, Jennifer; Pink, Maren; Mindiola, Daniel J

    2012-12-12

    The anilide-methyl complex (PNP)Sc(NH[DIPP])(CH(3)) (1) [PNP(-) = bis(2-diisopropylphosphino-4-tolyl)amide, DIPP = 2,6-diisopropylphenyl] eliminates methane (k(avg) = 5.13 × 10(-4) M(-1) s(-1) at 50 °C) in the presence of pyridine to generate the transient scandium imido (PNP)Sc═N[DIPP](NC(5)H(5)) (A-py), which rapidly activates the C-H bond of pyridine in 1,2-addition fashion to form the stable pyridyl complex (PNP)Sc(NH[DIPP])(η(2)-NC(5)H(4)) (2). Mechanistic studies suggest the C-H activation process to be second order overall: first order in scandium and first order in substrate (pyridine). Pyridine binding precedes elimination of methane, and α-hydrogen abstraction is overall-rate-determining [the kinetic isotope effect (KIE) for 1-d(1) conversion to 2 was 5.37(6) at 35 °C and 4.9(14) at 50 °C] with activation parameters ΔH(‡) = 17.9(9) kcal/mol and ΔS(‡) = -18(3) cal/(mol K), consistent with an associative-type mechanism. No KIE or exchange with the anilide proton was observed when 1-d(3) was treated with pyridine or thermolyzed at 35 or 50 °C. The post-rate-determining step, C-H bond activation of pyridine, revealed a primary KIE of 1.1(2) at 35 °C for the intermolecular C-H activation reaction in pyridine versus pyridine-d(5). Complex 2 equilibrated back to the imide A-py slowly, as the isotopomer (PNP)Sc(ND[DIPP])(η(2)-NC(5)H(4)) (2-d(1)) converted to (PNP)Sc(NH[DIPP])(η(2)-NC(5)H(3)D) over 9 days at 60 °C. Molecular orbital analysis of A-py suggested that this species possesses a fairly linear scandium imido motif (169.7°) with a very short Sc-N distance of 1.84 Å. Substituted pyridines can also be activated, with the rates of C-H activation depending on both the steric and electronic properties of the substrate.

  16. Hydrogen bond fluctuations and dispersive interactions of alcohol/alkane mixtures. An ultrasonic relaxation study

    NASA Astrophysics Data System (ADS)

    Kaatze, Udo; Behrends, Ralph

    2011-06-01

    The relaxation behaviour of 1-hexanol/n-heptane and 1-dodecanol/n-tetradecane mixtures has been studied at some compositions using ultrasonic attenuation spectrometry in the frequency range 0.4-3000 MHz. All mixtures reveal a relaxation term due to hydrogen network fluctuations. It is discussed in conjunction with the principle dielectric relaxation of alcohol/alkane mixtures, indicating a dynamically micro-heterogeneous liquid structure. The spectra of the long-chain alcohol system display an additional relaxation due to the structural isomerisation of the hydrocarbon chains. In terms of a torsional oscillator model this relaxation reveals the effect of molecular ordering on the enthalpy of activation.

  17. Palladium-catalyzed picolinamide-directed iodination of remote ortho-C-H bonds of arenes: Synthesis of tetrahydroquinolines.

    PubMed

    Nack, William A; Wang, Xinmou; Wang, Bo; He, Gang; Chen, Gong

    2016-01-01

    A new palladium-catalyzed picolinamide (PA)-directed ortho-iodination reaction of ε-C(sp(2))-H bonds of γ-arylpropylamine substrates is reported. This reaction proceeds selectively with a variety of γ-arylpropylamines bearing strongly electron-donating or withdrawing substituents, complementing our previously reported PA-directed electrophilic aromatic substitution approach to this transformation. As demonstrated herein, a three step sequence of Pd-catalyzed γ-C(sp(3))-H arylation, Pd-catalyzed ε-C(sp(2))-H iodination, and Cu-catalyzed C-N cyclization enables a streamlined synthesis of tetrahydroquinolines bearing diverse substitution patterns. PMID:27559375

  18. Molecular simulations of intermediate and long alkanes adsorbed on graphite: tuning of non-bond interactions.

    PubMed

    Firlej, Lucyna; Kuchta, Bogdan; Roth, Michael W; Wexler, Carlos

    2011-04-01

    The interplay between the torsional potential energy and the scaling of the 1-4 van der Waals and Coulomb interactions determines the stiffness of flexible molecules. In this paper we demonstrate for the first time that the precise value of the nonbond scaling factor (SF)--often a value assumed without justification--has a significant effect on the critical properties and mechanisms of systems undergoing a phase transition, and that, for accurate simulations, this scaling factor is highly dependent on the system under consideration. In particular, by analyzing the melting of n-alkanes (hexane C6, dodecane C12, tetracosane C24) on graphite, we show that the SF is not constant over varying alkane chain lengths when the structural correlated transformations are concerned. Instead, monotonic decrease of SF with the molecular length drives a cross-over between two distinct mechanisms for melting in such systems. In a broad sense we show that the choice for SF in any simulation containing adsorbed or correlated long molecules needs to be carefully considered.

  19. Transition-metal-catalyzed C-H bond functionalizations: feasible access to a diversity-oriented β-carboline library.

    PubMed

    Wu, Ningjie; Song, Feijie; Yan, Lipeng; Li, Juan; You, Jingsong

    2014-03-17

    Diversification of the β-carboline skeleton has been demonstrated to assemble a β-carboline library starting from the tetrahydro-β-carboline framework. This strategy affords feasible access to heteroaryl-, aryl-, alkenyl-, or alkynyl-substituted β-carbolines at the C1, C3, or C8 position through three categorically different types of transition-metal-catalyzed CC bond-forming reactions, in the presence of multiple potentially reactive positions. These site-selective functionalizations include; 1) the Cu-catalyzed C1/C3-selective decarboxylative C sp 3C sp 2 and C sp 3Csp coupling of hexahydro-β-carboline-3-carboxylic acid with a CH bond of a heteroarene or terminal alkyne; 2) the chelation-assisted Pd-catalyzed C1/C8-selective CH arylation of hexahydro-β-carboline with aryl boron reagents; and 3) the chelation-assisted Pd-catalyzed C1/C3-selective oxidative CH/CH cross-coupling of β-carboline-N-oxide with arenes, heteroarenes, or alkenes. The saturated structural feature of the hexahydro-β-carboline framework can increase reactivity and control site selectivity. The robustness of these approaches has been demonstrated through the synthesis of hyrtioerectine analogues and perlolyrine. We believe that these strategies could provide inspiration for late-stage diversifications of bioactive core scaffolds.

  20. Catalytic functionalization of low reactive C(sp(3))-H and C(sp(2))-H bonds of alkanes and arenes by carbene transfer from diazo compounds.

    PubMed

    Caballero, Ana; Díaz-Requejo, M Mar; Fructos, Manuel R; Olmos, Andrea; Urbano, Juan; Pérez, Pedro J

    2015-12-21

    The direct functionalization of low reactive C(sp(3))-H and C(sp(2))-H bonds of alkanes and arenes, respectively, by metal-induced carbene transfer from diazo compounds is reviewed. To date, this methodology has enabled the incorporation of CR(1)R(2) moieties from N2[double bond, length as m-dash]CR(1)R(2) in a chemo, regio, enantio or diastereoselective manner in those substrates with the appropriate selection of metal and ligands.

  1. Formation of C-C and C-O bonds and oxygen removal in reactions of alkanediols, alkanols, and alkanals on copper catalysts.

    PubMed

    Sad, María E; Neurock, Matthew; Iglesia, Enrique

    2011-12-21

    This study reports evidence for catalytic deoxygenation of alkanols, alkanals, and alkanediols on dispersed Cu clusters with minimal use of external H(2) and with the concurrent formation of new C-C and C-O bonds. These catalysts selectively remove O-atoms from these oxygenates as CO or CO(2) through decarbonylation or decarboxylation routes, respectively, that use C-atoms present within reactants or as H(2)O using H(2) added or formed in situ from CO/H(2)O mixtures via water-gas shift. Cu catalysts fully convert 1,3-propanediol to equilibrated propanol-propanal intermediates that subsequently form larger oxygenates via aldol-type condensation and esterification routes without detectable involvement of the oxide supports. Propanal-propanol-H(2) equilibration is mediated by their chemisorption and interconversion at surfaces via C-H and O-H activation and propoxide intermediates. The kinetic effects of H(2), propanal, and propanol pressures on turnover rates, taken together with measured selectivities and the established chemical events for base-catalyzed condensation and esterification reactions, indicate that both reactions involve kinetically relevant bimolecular steps in which propoxide species, acting as the base, abstract the α-hydrogen in adsorbed propanal (condensation) or attack the electrophilic C-atom at its carbonyl group (esterification). These weakly held basic alkoxides render Cu surfaces able to mediate C-C and C-O formation reactions typically catalyzed by basic sites inherent in the catalyst, instead of provided by coadsorbed organic moieties. Turnover rates for condensation and esterification reactions decrease with increasing Cu dispersion, because low-coordination corner and edge atoms prevalent on small clusters stabilize adsorbed intermediates and increase the activation barriers for the bimolecular kinetically relevant steps required for both reactions. PMID:22023723

  2. A germanium isocyanide complex featuring (n → π*) back-bonding and its conversion to a hydride/cyanide product via C-H bond activation under mild conditions.

    PubMed

    Brown, Zachary D; Vasko, Petra; Fettinger, James C; Tuononen, Heikki M; Power, Philip P

    2012-03-01

    Reaction of the diarylgermylene Ge(Ar(Me(6)))(2) [Ar(Me(6)) = C(6)H(3)-2,6-(C(6)H(2)-2,4,6-(CH(3))(3))(2)] with tert-butyl isocyanide gave the Lewis adduct species (Ar(Me(6)))(2)GeCNBu(t), in which the isocyanide ligand displays a decreased C-N stretching frequency consistent with an n → π* back-bonding interaction. Density functional theory confirmed that the HOMO is a Ge-C bonding combination between the lone pair of electrons on the germanium atom and the C-N π* orbital of the isocyanide ligand. The complex undergoes facile C-H bond activation to produce a new diarylgermanium hydride/cyanide species and isobutene via heterolytic cleavage of the N-Bu(t) bond.

  3. Driving Forces for Covalent Assembly of Porphyrins by Selective C-H Bond Activation and Intermolecular Coupling on a Copper Surface.

    PubMed

    Floris, Andrea; Haq, Sam; In't Veld, Mendel; Amabilino, David B; Raval, Rasmita; Kantorovich, Lev

    2016-05-11

    Recent synthesis of covalent organic assemblies at surfaces has opened the promise of producing robust nanostructures for functional interfaces. To uncover how this new chemistry works at surfaces and understand the underlying mechanisms that control bond-breaking and bond-making processes at specific positions of the participating molecules, we study here the coupling reaction of tetra(mesityl)porphyrin molecules, which creates covalently connected networks on the Cu(110) surface by utilizing the 4-methyl groups as unique connection points. Using scanning tunneling microscopy (STM), state-of-the-art density functional theory (DFT), and Nudged Elastic Band (NEB) calculations, we show that the unique directionality of the covalent bonding is found to stem from a chain of highly selective C-H activation and dehydrogenation processes, followed by specific intermolecular C-C coupling reactions that are facilitated by the surface, by steric constraints, and by anisotropic molecular diffusion. These insights provide the first steps toward developing synthetic rules for complex two-dimensional covalent organic chemistry that can be enacted directly at a surface to deliver specific macromolecular structures designed for specific functions.

  4. Oxyfunctionalization of unactivated C-H bonds in triterpenoids with tert-butylhydroperoxide catalyzed by meso-5,10,15,20-tetramesitylporphyrinate osmium(II) carbonyl complex.

    PubMed

    Ogawa, Shoujiro; Wakatsuki, Yasuo; Makino, Mitsuko; Fujimoto, Yasuo; Yasukawa, Ken; Kikuchi, Takashi; Ukiya, Motohiko; Akihisa, Toshihiro; Iida, Takashi

    2010-02-01

    A system consisting of meso-5,10,15,20-tetramesitylporphyrinate osmium(II) carbonyl complex [Os(TMP)CO] as a precatalyst and tert-butylhydroperoxide (TBHP) as an oxygen donor is shown to be an efficient, regioselective oxidant system for the allylic oxidation, ketonization and hydroxylation of unactivated C-H bonds in a series of the peracetate derivatives of penta- and tetracyclic triterpenoids. Treatment of the substrates with this oxidant system afforded a variety of novel or scarce oxygenated derivatives in one-step. Structures of the isolated components, after chromatographic separation, were determined by spectroscopic methods including GC-MS and shift-correlated 2D-NMR techniques. Factors governing the regioselectivity and the possible mechanism for the oxyfunctionalization of the unactivated carbons are also discussed.

  5. Scope and Limitations of Auxiliary-Assisted, Palladium-Catalyzed Arylation and Alkylation of sp2 and sp3 C-H Bonds

    PubMed Central

    Nadres, Enrico T.; Santos, Gerson Ivan Franco; Shabashov, Dmitry; Daugulis, Olafs

    2013-01-01

    The scope of palladium-catalyzed, auxiliary-assisted direct arylation and alkylation of sp2 and sp3 C-H bonds of amine and carboxylic acid derivatives has been investigated. The method employs a palladium acetate catalyst, substrate, aryl, alkyl, benzyl, or allyl halide, and inorganic base in t-amyl alcohol or water solvent at 100-140 °C. Aryl and alkyl iodides as well as benzyl and allyl bromides are competent reagents in this transformation. Picolinic acid auxiliary is used for amine γ-functionalization and 8-aminoquinoline auxiliary is used for carboxylic acid β-functionalization. Some optimization of base, additives, and solvent is required for achieving best results. PMID:24090404

  6. A Tale of Copper Coordination Frameworks: Controlled Single-Crystal-to-Single-Crystal Transformations and Their Catalytic C-H Bond Activation Properties.

    PubMed

    Chen, Yifa; Feng, Xiao; Huang, Xianqiang; Lin, Zhengguo; Pei, Xiaokun; Li, Siqing; Li, Jikun; Wang, Shan; Li, Rui; Wang, Bo

    2015-09-28

    Metal-organic frameworks (MOFs), as a class of microporous materials with well-defined channels and rich functionalities, hold great promise for various applications. Yet the formation and crystallization processes of various MOFs with distinct topology, connectivity, and properties remain largely unclear, and the control of such processes is rather challenging. Starting from a 0D Cu coordination polyhedron, MOP-1, we successfully unfolded it to give a new 1D-MOF by a single-crystal-to-single-crystal (SCSC) transformation process at room temperature as confirmed by SXRD. We also monitored the continuous transformation states by FTIR and PXRD. Cu MOFs with 2D and 3D networks were also obtained from this 1D-MOF by SCSC transformations. Furthermore, Cu MOFs with 0D, 1D, and 3D networks, MOP-1, 1D-MOF, and HKUST-1, show unique performances in the kinetics of the C-H bond catalytic oxidation reaction.

  7. Regioselective borylation of porphyrins by C-H bond activation under iridium catalysis to afford useful building blocks for porphyrin assemblies.

    PubMed

    Hata, Hiroshi; Yamaguchi, Shigeru; Mori, Goro; Nakazono, Satomi; Katoh, Taisuke; Takatsu, Keishi; Hiroto, Satoru; Shinokubo, Hiroshi; Osuka, Atsuhiro

    2007-07-01

    Highly regioselective and efficient borylation of a variety of porphyrins has been achieved by reaction with bis(pinacolato)diboron through C-H bond activation under iridium catalysis on the basis of the synthetic protocol developed by Miyaura, Hartwig, and Smith. A boryl group can be selectively introduced at sterically uncongested positions in the peripheral aryl groups of porphyrin substrates whose peripheral beta-positions are sterically hindered. Curiously, beta substituents adjacent to the aryl group to be borylated have unexpectedly large effects on the regioselectivity, because the iridium catalyst can discriminate between subtle steric differences. Chemoselective borylation was also achieved for several functionalized porphyrins. This borylation protocol can be applied to various monomeric and oligomeric functional porphyrins, hence offering an efficient route to elaborate multiporphyrin-based molecular constructs.

  8. Comparative dimerization of 1-butene with a variety of metal catalysts, and the investigation of a new catalyst for C=H bond activation.

    PubMed

    Small, Brooke L; Schmidt, Roland

    2004-02-20

    Catalytic dimerization of 1-butene by a variety of catalysts is carried out, and the products are analyzed by gas chromatography and mass spectrometry. Catalysts based on cobalt and iron can produce highly linear dimers, with the cobalt-based dimers exceeding 97 % linearity. Catalysts based on vanadium and aluminum prefer to make branched dimers, which are most often methyl-heptenes in the case of vanadium and almost exclusively 2-ethyl-1-butene in the case of aluminum. The vanadium catalyst also produces substantial amounts of dienes and alkanes, suggesting a competing hydrogenation/dehydrogenation pathway that appears to involve vinyl Cbond;H bond activation. Nickel catalysts are generally less selective than those based on iron or cobalt for making linear dimers, but they can make dimers with 60 % linearity. The major by-products for the nickel systems are trisubstituted internal olefins. An important side reaction that must be considered for dimerization reactions is 1-butene isomerization to 2-butene, which makes recycling the butene difficult for a linear dimerization process. Aluminum, iron, and vanadium systems promote very little isomerization, but nickel and cobalt systems tend to isomerize the undimerized substrate heavily. PMID:14978828

  9. Quantitative Vapor-phase IR Intensities and DFT Computations to Predict Absolute IR Spectra based on Molecular Structure: I. Alkanes

    SciTech Connect

    Williams, Stephen D.; Johnson, Timothy J.; Sharpe, Steven W.; Yavelak, Veronica; Oats, R. P.; Brauer, Carolyn S.

    2013-11-13

    Recently recorded quantitative IR spectra of a variety of gas-phase alkanes are shown to have integrated intensities in both the C-H stretching and C-H bending regions that depend linearly on the molecular size, i.e. the number of C-H bonds. This result is well predicted from CH4 to C15H32 by DFT computations of IR spectra at the B3LYP/6-31+G(d,p) level of DFT theory. A simple model predicting the absolute IR band intensities of alkanes based only on structural formula is proposed: For the C-H stretching band near 2930 cm-1 this is given by (in km/mol): CH¬_str = (34±3)*CH – (41±60) where CH is number of C-H bonds in the alkane. The linearity is explained in terms of coordinated motion of methylene groups rather than the summed intensities of autonomous -CH2- units. The effect of alkyl chain length on the intensity of a C-H bending mode is explored and interpreted in terms of conformer distribution. The relative intensity contribution of a methyl mode compared to the total C-H stretch intensity is shown to be linear in the number of terminal methyl groups in the alkane, and can be used to predict quantitative spectra a priori based on structure alone.

  10. C-H bond activation of the methyl group of the supporting ligand in an osmium(III) complex upon reaction with H2O2: formation of an organometallic osmium(IV) complex.

    PubMed

    Sugimoto, Hideki; Ashikari, Kenji; Itoh, Shinobu

    2013-01-18

    Oxidation of the hydroxoosmium(III) complex resulted in C-H bond activation of the methyl group of the supporting ligand (N,N'-dimethyl-2,11-diaza[3.3](2,6)pyridinophane). The product was an osmium(IV) complex exhibiting a seven-coordinate structure with an additional Os-CH(2) bond.

  11. Conversion of alkanes to linear alkylsilanes using an iridium-iron-catalysed tandem dehydrogenation-isomerization-hydrosilylation.

    PubMed

    Jia, Xiangqing; Huang, Zheng

    2016-02-01

    The conversion of inexpensive, saturated hydrocarbon feedstocks into value-added speciality chemicals using regiospecific, catalytic functionalization of alkanes is a major goal of organometallic chemistry. Linear alkylsilanes represent one such speciality chemical-they have a wide range of applications, including release coatings, silicone rubbers and moulding products. Direct, selective, functionalization of alkanes at primary C-H bonds is difficult and, to date, methods for catalytically converting alkanes into linear alkylsilanes are unknown. Here, we report a well-defined, dual-catalyst system for one-pot, two-step alkane silylations. The system comprises a pincer-ligated Ir catalyst for alkane dehydrogenation and an Fe catalyst that effects a subsequent tandem olefin isomerization-hydrosilylation. This method exhibits exclusive regioselectivity for the production of terminally functionalized alkylsilanes. This dual-catalyst strategy has also been applied to regioselective alkane borylations to form linear alkylboronate esters. PMID:26791899

  12. Conversion of alkanes to linear alkylsilanes using an iridium-iron-catalysed tandem dehydrogenation-isomerization-hydrosilylation

    NASA Astrophysics Data System (ADS)

    Jia, Xiangqing; Huang, Zheng

    2016-02-01

    The conversion of inexpensive, saturated hydrocarbon feedstocks into value-added speciality chemicals using regiospecific, catalytic functionalization of alkanes is a major goal of organometallic chemistry. Linear alkylsilanes represent one such speciality chemical—they have a wide range of applications, including release coatings, silicone rubbers and moulding products. Direct, selective, functionalization of alkanes at primary C-H bonds is difficult and, to date, methods for catalytically converting alkanes into linear alkylsilanes are unknown. Here, we report a well-defined, dual-catalyst system for one-pot, two-step alkane silylations. The system comprises a pincer-ligated Ir catalyst for alkane dehydrogenation and an Fe catalyst that effects a subsequent tandem olefin isomerization-hydrosilylation. This method exhibits exclusive regioselectivity for the production of terminally functionalized alkylsilanes. This dual-catalyst strategy has also been applied to regioselective alkane borylations to form linear alkylboronate esters.

  13. Bioinspired Nonheme Iron Catalysts for C-H and C═C Bond Oxidation: Insights into the Nature of the Metal-Based Oxidants.

    PubMed

    Oloo, Williamson N; Que, Lawrence

    2015-09-15

    Recent efforts to design synthetic iron catalysts for the selective and efficient oxidation of C-H and C═C bonds have been inspired by a versatile family of nonheme iron oxygenases. These bioinspired nonheme (N4)Fe(II) catalysts use H2O2 to oxidize substrates with high regio- and stereoselectivity, unlike in Fenton chemistry where highly reactive but unselective hydroxyl radicals are produced. In this Account, we highlight our efforts to shed light on the nature of metastable peroxo intermediates, which we have trapped at -40 °C, in the reactions of the iron catalyst with H2O2 under various conditions and the high-valent species derived therefrom. Under the reaction conditions that originally led to the discovery of this family of catalysts, we have characterized spectroscopically an Fe(III)-OOH intermediate (EPR g(max) = 2.19) that leads to the hydroxylation of substrate C-H bonds or the epoxidation and cis-dihydroxylation of C═C bonds. Surprisingly, these organic products show incorporation of (18)O from H2(18)O, thereby excluding the possibility of a direct attack of the Fe(III)-OOH intermediate on the substrate. Instead, a water-assisted mechanism is implicated in which water binding to the iron(III) center at a site adjacent to the hydroperoxo ligand promotes heterolytic cleavage of the O-O bond to generate an Fe(V)(O)(OH) oxidant. This mechanism is supported by recent kinetic studies showing that the Fe(III)-OOH intermediate undergoes exponential decay at a rate enhanced by the addition of water and retarded by replacement of H2O with D2O, as well as mass spectral evidence for the Fe(V)(O)(OH) species obtained by the Costas group. The nature of the peroxo intermediate changes significantly when the reactions are carried out in the presence of carboxylic acids. Under these conditions, spectroscopic studies support the formation of a (κ(2)-acylperoxo)iron(III) species (EPR g(max) = 2.58) that decays at -40 °C in the absence of substrate to form an

  14. Temperature-dependent transitions between normal and inverse isotope effects pertaining to the interaction of H-H and C-H bonds with transition metal centers.

    PubMed

    Parkin, Gerard

    2009-02-17

    Deuterium kinetic isotope effects (KIEs) serve as versatile tools to infer details about reaction mechanisms and the nature of transition states, while equilibrium isotope effects (EIEs) associated with the site preferences of hydrogen and deuterium enable researchers to study aspects of molecular structure. Researchers typically interpret primary deuterium isotope effects based on two simple guidelines: (i) the KIE for an elementary reaction is normal (k(H)/k(D) > 1) and (ii) the EIE is dictated by deuterium preferring to be located in the site corresponding to the highest frequency oscillator. In this Account, we evaluate the applicability of these rules to the interactions of H-H and C-H bonds with a transition metal center. Significantly, experimental and computational studies question the predictability of primary EIEs in these systems based on the notion that deuterium prefers to occupy the highest frequency oscillator. In particular, the EIEs for (i) formation of sigma-complexes by coordination of H-H and C-H bonds and (ii) oxidative addition of dihydrogen exhibit unusual temperature dependencies, such that the same system may demonstrate both normal (i.e., K(H)/K(D) > 1) and inverse (i.e., K(H)/K(D) < 1) values. The transition between a normal and inverse EIE indicates that these systems do not demonstrate the typical monotonic variation predicted by the van't Hoff relationship. Instead, the calculated EIEs in these systems are 0 at 0 K, increase to a value greater than 1, and then decrease to unity at infinite temperature. This unusual behavior may be rationalized by considering the individual factors that contribute to the EIE. Specifically, the EIE may be expressed in the form EIE = SYM x MMI x EXC x ZPE (where SYM is the symmetry factor, MMI is the mass-moment of inertia term, EXC is the excitation term, and ZPE is the zero-point energy term), and the distinctive temperature profile results from the inverse ZPE (enthalpy) and normal [SYM x MMI x EXC

  15. Theoretical calculation of the OH vibrational overtone spectra of 1-n alkane diols (n = 2-4): origin of disappearing hydrogen-bonded OH peak.

    PubMed

    Cheng, Yu-Lung; Chen, Hui-Yi; Takahashi, Kaito

    2011-06-01

    In this theoretical study, we simulated the vibrational overtone spectrum of ethylene glycol (EG), 1-3 propanediol (PD), and 1-4 butanediol (BD). Using the local mode model along with the potential energy curve and dipole moment function calculated by B3LYP/6-31+G(d,p) and QCISD/6-311++G(3df,3pd), we obtained the theoretical peak position and integrated absorption coefficient. Furthermore, the vibrational spectra was simulated using a Voigt function using homogeneous and inhomogenous width obtained from quantum chemical calculation methods. Previously, Howard and Kjaergaard recorded the second and third overtone photoacoustic spectra of the three aforementioned alkane diols in the gas phase and observed that the intramolecular hydrogen bonded OH peak becomes difficult to observe as the intramolecular hydrogen bonding strength increased, that is, as the chain length was increased. In this paper we show that the disappearance of the hydrogen-bonded OH peak for the OH stretching overtone excitation for BD is partly due to the increase in homogeneous width due to the increase in the hydrogen bond strength and partly due to the decrease in the relative population of the intramolecular hydrogen-bonded conformers as the chain length is increased. This latter feature is a consequence of the unfavorable strained geometry needed to form the intramolecular hydrogen bond in longer alkane chains. PMID:21568300

  16. The C-H bond activation in 1-ethyl-3-methylimidazolium acetate-copper(II) acetate-water-air (dioxygen) systems.

    PubMed

    Shtyrlin, Valery G; Serov, Nikita Yu; Islamov, Daut R; Konkin, Alexander L; Bukharov, Mikhail S; Gnezdilov, Oleg I; Krivolapov, Dmitry B; Kataeva, Ol'ga N; Nazmutdinova, Gulnara A; Wendler, Frank

    2014-01-14

    Ionic liquid (1-ethyl-3-methylimidazolium acetate, [C2C1im][AcO])-copper(ii) diacetate monohydrate-water-air (O2) systems have been investigated by (13)C NMR, EPR, spectrophotometry, HPLC, and synthetic chemistry methods at different temperatures. The C-H bond activation of [C2C1im](+) with the formation of the unusual dication 1,1'-diethyl-3,3'-dimethyl-2,2'-biimidazolium ([(C2C1im)2](2+)) at 50 °C and 1-ethyl-3-methyl-1H-imidazol-2(3H)-one (C2C1imO) at 50-85 °C was revealed. Two new complexes with the above compounds, [(C2C1im)2][Cu(AcO)4] and Cu2(AcO)4(C2C1imO)2, were isolated from the systems and characterized by X-ray structural analysis. Catalytic cycles with the participation of copper(ii) acetate and dioxygen and the production of [(C2C1im)2](2+) and C2C1imO have been proposed. The catalysis presumably includes the formation of the Cu(II)(O2)Cu(II) active centre with μ-η(2):η(2)-peroxide bridging in analogy with tyrosinase and catechol oxidase activity. PMID:24154681

  17. The Molybdenum Active Site of Formate Dehydrogenase Is Capable of Catalyzing C-H Bond Cleavage and Oxygen Atom Transfer Reactions.

    PubMed

    Hartmann, Tobias; Schrapers, Peer; Utesch, Tillmann; Nimtz, Manfred; Rippers, Yvonne; Dau, Holger; Mroginski, Maria Andrea; Haumann, Michael; Leimkühler, Silke

    2016-04-26

    Formate dehydrogenases (FDHs) are capable of performing the reversible oxidation of formate and are enzymes of great interest for fuel cell applications and for the production of reduced carbon compounds as energy sources from CO2. Metal-containing FDHs in general contain a highly conserved active site, comprising a molybdenum (or tungsten) center coordinated by two molybdopterin guanine dinucleotide molecules, a sulfido and a (seleno-)cysteine ligand, in addition to a histidine and arginine residue in the second coordination sphere. So far, the role of these amino acids in catalysis has not been studied in detail, because of the lack of suitable expression systems and the lability or oxygen sensitivity of the enzymes. Here, the roles of these active site residues is revealed using the Mo-containing FDH from Rhodobacter capsulatus. Our results show that the cysteine ligand at the Mo ion is displaced by the formate substrate during the reaction, the arginine has a direct role in substrate binding and stabilization, and the histidine elevates the pKa of the active site cysteine. We further found that in addition to reversible formate oxidation, the enzyme is further capable of reducing nitrate to nitrite. We propose a mechanistic scheme that combines both functionalities and provides important insights into the distinct mechanisms of C-H bond cleavage and oxygen atom transfer catalyzed by formate dehydrogenase. PMID:27054466

  18. Manganese Catalyzed C-H Halogenation.

    PubMed

    Liu, Wei; Groves, John T

    2015-06-16

    The remarkable aliphatic C-H hydroxylations catalyzed by the heme-containing enzyme, cytochrome P450, have attracted sustained attention for more than four decades. The effectiveness of P450 enzymes as highly selective biocatalysts for a wide range of oxygenation reactions of complex substrates has driven chemists to develop synthetic metalloporphyrin model compounds that mimic P450 reactivity. Among various known metalloporphyrins, manganese derivatives have received considerable attention since they have been shown to be versatile and powerful mediators for alkane hydroxylation and olefin epoxidation. Mechanistic studies have shown that the key intermediates of the manganese porphyrin-catalyzed oxygenation reactions include oxo- and dioxomanganese(V) species that transfer an oxygen atom to the substrate through a hydrogen abstraction/oxygen recombination pathway known as the oxygen rebound mechanism. Application of manganese porphyrins has been largely restricted to catalysis of oxygenation reactions until recently, however, due to ultrafast oxygen transfer rates. In this Account, we discuss recently developed carbon-halogen bond formation, including fluorination reactions catalyzed by manganese porphyrins and related salen species. We found that biphasic sodium hypochlorite/manganese porphyrin systems can efficiently and selectively convert even unactivated aliphatic C-H bonds to C-Cl bonds. An understanding of this novel reactivity derived from results obtained for the oxidation of the mechanistically diagnostic substrate and radical clock, norcarane. Significantly, the oxygen rebound rate in Mn-mediated hydroxylation is highly correlated with the nature of the trans-axial ligands bound to the manganese center (L-Mn(V)═O). Based on the ability of fluoride ion to decelerate the oxygen rebound step, we envisaged that a relatively long-lived substrate radical could be trapped by a Mn-F fluorine source, effecting carbon-fluorine bond formation. Indeed, this idea

  19. A DFT and ab initio benchmarking study of metal-alkane interactions and the activation of carbon-hydrogen bonds.

    PubMed

    Flener-Lovitt, Charity; Woon, David E; Dunning, Thom H; Girolami, Gregory S

    2010-02-01

    Density functional theory and ab initio methods have been used to calculate the structures and energies of minima and transition states for the reactions of methane coordinated to a transition metal. The reactions studied are reversible C-H bond activation of the coordinated methane ligand to form a transition metal methyl hydride complex and dissociation of the coordinated methane ligand. The reaction sequence can be summarized as L(x)M(CH(3))H <==> L(x)M(CH(4)) <==> L(x)M + CH(4), where L(x)M is the osmium-containing fragment (C(5)H(5))Os(R(2)PCH(2)PR(2))(+) and R is H or CH(3). Three-center metal-carbon-hydrogen interactions play an important role in this system. Both basis sets and functionals have been benchmarked in this work, including new correlation consistent basis sets for a third transition series element, osmium. Double zeta quality correlation consistent basis sets yield energies close to those from calculations with quadruple-zeta basis sets, with variations that are smaller than the differences between functionals. The energies of important species on the potential energy surface, calculated by using 10 DFT functionals, are compared both to experimental values and to CCSD(T) single point calculations. Kohn-Sham natural bond orbital descriptions are used to understand the differences between functionals. Older functionals favor electrostatic interactions over weak donor-acceptor interactions and, therefore, are not particularly well suited for describing systems--such as sigma-complexes--in which the latter are dominant. Newer kinetic and dispersion-corrected functionals such as MPW1K and M05-2X provide significantly better descriptions of the bonding interactions, as judged by their ability to predict energies closer to CCSD(T) values. Kohn-Sham and natural bond orbitals are used to differentiate between bonding descriptions. Our evaluations of these basis sets and DFT functionals lead us to recommend the use of dispersion corrected functionals in

  20. Rhodium(III)-catalyzed cyanation of vinylic C-H bonds: N-cyano-N-phenyl-p-toluenesulfonamide as a cyanation reagent.

    PubMed

    Su, Wei; Gong, Tian-Jun; Xiao, Bin; Fu, Yao

    2015-07-28

    Rh(III)-catalyzed direct vinylic C-H cyanation reaction has been developed as a practical method for the synthesis of alkenyl nitriles. N-Cyano-N-phenyl-p-methylbenzenesulfonamide (NCTS), a user-friendly cyanation reagent, was used in the transformation. Both acrylamides and ketoximes can be employed in the new C-H cyanation process. PMID:26108194

  1. KO(t)Bu-mediated synthesis of dimethylisoindolin-1-ones and dimethyl-5-phenylisoindolin-1-ones: selective C-C coupling of an unreactive tertiary sp3 C-H bond.

    PubMed

    Bhakuni, Bhagat Singh; Yadav, Abhimanyu; Kumar, Shailesh; Patel, Saket; Sharma, Shubham; Kumar, Sangit

    2014-04-01

    A new reaction for the synthesis of dimethylisoindolinones has been presented from 2-halo-N-isopropyl-N-alkylbenzamide substrates and KO(t)Bu by the selective C-C coupling of an unreactive tertiary sp(3) C-H bond. The reaction manifested an excellent selectivity toward a tertiary sp(3) C-H bond over primary or sec C-H bond. Moreover, biaryl C-C coupling along with alkyl-aryl C-C coupling can be achieved in one pot using dihalobenzamides for the synthesis of biaryl 5-phenylisoindolin-1-ones. It seems that the reaction proceeds via a radical pathway in which the aryl radical translocates via 1,5-hydrogen atom transfer (HAT), forming a tertiary alkyl carbon-centered radical. The generated tertiary alkyl radical could attack the benzamide ring in a 5-exo/endo-trig manner followed by the release of an electron and a proton, leading to a five-membered isoindolinone ring. HAT seems to be responsible for the selective functionalization of the tertiary alkyl group over primary and secondary C-H bonds.

  2. The amide C-N bond of isatins as the directing group and the internal oxidant in Ru-catalyzed C-H activation and annulation reactions: access to 8-amido isocoumarins.

    PubMed

    Kaishap, Partha Pratim; Sarma, Bipul; Gogoi, Sanjib

    2016-07-28

    The N-O, N-N and O-O bonds are the frequently used internally oxidative directing groups used in various redox-neutral coupling reactions. The sole use of the C-N bond as the oxidizing directing group was reported recently by Li X. and co-workers for the Rh(iii)-catalyzed C-H activation of phenacyl ammonium salts. Herein, we report the use of the amide C-N bond of isatins as the oxidizing directing group for the Ru(ii)-catalyzed redox-neutral C-H activation and annulation reactions with alkynes which afford 8-amido isocoumarins. The reaction also features excellent regioselectivity with alkyl aryl substituted alkynes. PMID:27417438

  3. Ruthenium-catalyzed alkylation of indoles with tertiary amines by oxidation of a sp3 C-H bond and Lewis acid catalysis.

    PubMed

    Wang, Ming-Zhong; Zhou, Cong-Ying; Wong, Man-Kin; Che, Chi-Ming

    2010-05-17

    Ruthenium porphyrins (particularly [Ru(2,6-Cl(2)tpp)CO]; tpp=tetraphenylporphinato) and RuCl(3) can act as oxidation and/or Lewis acid catalysts for direct C-3 alkylation of indoles, giving the desired products in high yields (up to 82% based on 60-95% substrate conversions). These ruthenium compounds catalyze oxidative coupling reactions of a wide variety of anilines and indoles bearing electron-withdrawing or electron-donating substituents with high regioselectivity when using tBuOOH as an oxidant, resulting in the alkylation of N-arylindoles to 3-{[(N-aryl-N-alkyl)amino]methyl}indoles (yield: up to 82%, conversion: up to 95%) and the alkylation of N-alkyl or N-H indoles to 3-[p-(dialkylamino)benzyl]indoles (yield: up to 73%, conversion: up to 92%). A tentative reaction mechanism involving two pathways is proposed: an iminium ion intermediate may be generated by oxidation of an sp(3) C-H bond of the alkylated aniline by an oxoruthenium species; this iminium ion could then either be trapped by an N-arylindole (pathway A) or converted to formaldehyde, allowing a subsequent three-component coupling reaction of the in situ generated formaldehyde with an N-alkylindole and an aniline in the presence of a Lewis acid catalyst (pathway B). The results of deuterium-labeling experiments are consistent with the alkylation of N-alkylindoles via pathway B. The relative reaction rates of [Ru(2,6-Cl(2)tpp)CO]-catalyzed oxidative coupling reactions of 4-X-substituted N,N-dimethylanilines with N-phenylindole (using tBuOOH as oxidant), determined through competition experiments, correlate linearly with the substituent constants sigma (R(2)=0.989), giving a rho value of -1.09. This rho value and the magnitudes of the intra- and intermolecular deuterium isotope effects (k(H)/k(D)) suggest that electron transfer most likely occurs during the initial stage of the oxidation of 4-X-substituted N,N-dimethylanilines. Ruthenium-catalyzed three-component reaction of N-alkyl/N-H indoles

  4. Dehydrofluorination of Hydrofluorocarbons by Titanium Alkylidynes via Sequential C-H/C-F Bond Activation Reactions. A Synthetic, Structural, and Mechanistic Study of 1,2-CH Bond Addition and [beta]-Fluoride Elimination

    SciTech Connect

    Fout, A.R.; Scott, J.; Miller, D.L.; Bailey, B.C.; Pink, M.; Mindiola, D.J.

    2009-01-07

    The neopentylidene-neopentyl complex (PNP)Ti=CH{sup t}Bu(CH{sub 2}{sup t}Bu) (1); (PNP{sup -} = N[2-P(CHMe{sub 2}){sub 2}-4-methylphenyl]{sub 2}) extrudes neopentane in neat fluorobenzene under mild conditions (25 C) to generate the transient titanium alkylidyne (PNP)Ti-C{sup t}Bu (A), which subsequently undergoes regioselective 1,2-CH bond addition of a fluorobenzene across the Ti-C linkage to generate (PNP)Ti=CH{sup t}Bu(o-FC{sub 6}H{sub 4}) (2). Kinetic and mechanistic studies suggest that the C-H activation process is pseudo-first-order in titanium, with the {alpha}-hydrogen abstraction being the rate-determining step and the post-rate-determining step being the C-H bond activation of fluorobenzene. At 100 C complex 2 does not equilibrate back to A and the preference for C-H activation in benzene versus fluorobenzene is 2:3, respectively. Compound 1 also reacts readily, and in most cases cleanly, with a series of hydrofluoroarenes (HAr{sub F}), to form a family of alkylidene-arylfluoride derivatives of the type (PNP)Ti=CH{sup t}Bu(Ar{sub F}). Thermolysis of the latter compounds generates the titanium alkylidene-fluoride (PNP)Ti=CH{sup t}Bu(F) (14) by a {beta}-fluoride elimination, concurrent with formation of o-benzyne. {beta}-Fluoride elimination to yield 14 occurs from 2 under elevated temperatures with k{sub average} = 4.96(16) x 10{sup -5} s{sup -1} and with activation parameters {Delta}H{sub {-+}} = 29(1) kcal/mol and {Delta}S{sub {-+}} = -3(4) cal/mol {center_dot}K. It was found that {beta}-fluoride elimination is accelerated when electron-rich groups are adjacent to the fluoride group, thus implying that a positive charge buildup at the arylfluoride ring occurs in the activated complex of 2. The alkylidene derivative (PNP)Ti=CHSiMe{sub 3}(CH{sub 2}SiMe{sub 3}) (15) also undergoes {alpha}-hydrogen abstraction to form the putative (PNP)Ti'-CSiMe{sub 3} (B) at higher temperatures (>70 C) and dehydrofluorinates the same series of HArF when the reaction

  5. Alkane desaturation by concerted double hydrogen atom transfer to benzyne.

    PubMed

    Niu, Dawen; Willoughby, Patrick H; Woods, Brian P; Baire, Beeraiah; Hoye, Thomas R

    2013-09-26

    The removal of two vicinal hydrogen atoms from an alkane to produce an alkene is a challenge for synthetic chemists. In nature, desaturases and acetylenases are adept at achieving this essential oxidative functionalization reaction, for example during the biosynthesis of unsaturated fatty acids, eicosanoids, gibberellins and carotenoids. Alkane-to-alkene conversion almost always involves one or more chemical intermediates in a multistep reaction pathway; these may be either isolable species (such as alcohols or alkyl halides) or reactive intermediates (such as carbocations, alkyl radicals, or σ-alkyl-metal species). Here we report a desaturation reaction of simple, unactivated alkanes that is mechanistically unique. We show that benzynes are capable of the concerted removal of two vicinal hydrogen atoms from a hydrocarbon. The discovery of this exothermic, net redox process was enabled by the simple thermal generation of reactive benzyne intermediates through the hexadehydro-Diels-Alder cycloisomerization reaction of triyne substrates. We are not aware of any single-step, bimolecular reaction in which two hydrogen atoms are simultaneously transferred from a saturated alkane. Computational studies indicate a preferred geometry with eclipsed vicinal C-H bonds in the alkane donor.

  6. The effect of hydrogen bonding on the diffusion of water in n-alkanes and n-alcohols measured with a novel single microdroplet method

    NASA Astrophysics Data System (ADS)

    Su, Jonathan T.; Duncan, P. Brent; Momaya, Amit; Jutila, Arimatti; Needham, David

    2010-01-01

    While the Stokes-Einstein (SE) equation predicts that the diffusion coefficient of a solute will be inversely proportional to the viscosity of the solvent, this relation is commonly known to fail for solutes, which are the same size or smaller than the solvent. Multiple researchers have reported that for small solutes, the diffusion coefficient is inversely proportional to the viscosity to a fractional power, and that solutes actually diffuse faster than SE predicts. For other solvent systems, attractive solute-solvent interactions, such as hydrogen bonding, are known to retard the diffusion of a solute. Some researchers have interpreted the slower diffusion due to hydrogen bonding as resulting from the effective diffusion of a larger complex of a solute and solvent molecules. We have developed and used a novel micropipette technique, which can form and hold a single microdroplet of water while it dissolves in a diffusion controlled environment into the solvent. This method has been used to examine the diffusion of water in both n-alkanes and n-alcohols. It was found that the polar solute water, diffusing in a solvent with which it cannot hydrogen bond, closely resembles small nonpolar solutes such as xenon and krypton diffusing in n-alkanes, with diffusion coefficients ranging from 12.5×10-5 cm2/s for water in n-pentane to 1.15×10-5 cm2/s for water in hexadecane. Diffusion coefficients were found to be inversely proportional to viscosity to a fractional power, and diffusion coefficients were faster than SE predicts. For water diffusing in a solvent (n-alcohols) with which it can hydrogen bond, diffusion coefficient values ranged from 1.75×10-5 cm2/s in n-methanol to 0.364×10-5 cm2/s in n-octanol, and diffusion was slower than an alkane of corresponding viscosity. We find no evidence for solute-solvent complex diffusion. Rather, it is possible that the small solute water may be retarded by relatively longer residence times (compared to non-H-bonding solvents

  7. A regioselective synthesis of benzopinacolones through aerobic dehydrogenative α-arylation of the tertiary sp3 C-H bond of 1,1-diphenylketones with aromatic and heteroaromatic compounds.

    PubMed

    More, Nagnath Yadav; Jeganmohan, Masilamani

    2015-01-12

    A regioselective synthesis of symmetrical and unsymmetrical benzopinacolones through aerobic dehydrogenative α-arylation at the tertiary sp(3) C-H bond of substituted 1,1-diphenylketones with aromatic and heteroaromatic compounds, in the presence of K2S2O8 in CF3COOH at room temperature, is described. The reaction is proposed to go via a carbocation intermediate, which could be generated directly from cleavage of the sp(3) C-H bond of 1,1-diphenylketone. Subsequent α-arylation was achieved at the methene sp(3) carbon atom of the substituted ketone. A variety of substituted aromatic and heteroaromatic compounds were compatible with this reaction. In addition, benzopinacolones were converted into sterically hindered, tetrasubstituted alkenes and polycyclic aromatic compounds.

  8. C8-Selective Acylation of Quinoline N-Oxides with α-Oxocarboxylic Acids via Palladium-Catalyzed Regioselective C-H Bond Activation.

    PubMed

    Chen, Xiaopei; Cui, Xiuling; Wu, Yangjie

    2016-08-01

    A facile and efficient protocol for palladium-catalyzed C8-selective acylation of quinoline N-oxides with α-oxocarboxylic acids has been developed. In this approach, N-oxide was utilized as a stepping stone for the remote C-H functionalization. The reactions proceeded efficiently under mild reaction conditions with excellent regioselectivity and broad functional group tolerance. PMID:27441527

  9. Birge-Sponer Estimation of the C-H Bond Dissociation Energy in Chloroform Using Infrared, Near-Infrared, and Visible Absorption Spectroscopy: An Experiment in Physical Chemistry

    ERIC Educational Resources Information Center

    Myrick, M. L.; Greer, A. E.; Nieuwland, A. A.; Priore, R. J.; Scaffidi, J.; Andreatta, Danielle; Colavita, Paula

    2008-01-01

    The fundamental and overtone vibrational absorption spectroscopy of the C-H unit in CHCl[subscript 3] is measured for transitions from the v = 0 energy level to v = 1 through v = 5 energy levels. The energies of the transitions exhibit a linearly-decreasing spacing between adjacent vibrational levels as the vibrational quantum number increases.…

  10. Rare-earth metal complexes having an unusual indolyl-1,2-dianion through C-H activation with a novel η1:(μ2-η1:η1) bonding with metals.

    PubMed

    Zhu, Xiancui; Zhou, Shuangliu; Wang, Shaowu; Wei, Yun; Zhang, Lijun; Wang, Fenhua; Wang, Shaoyin; Feng, Zhijun

    2012-12-21

    Studies on the reactions of 3-(tert-butyliminomethine)indole or 3-(tert-butylaminomethylene)indole with rare-earth metal amides [(Me(3)Si)(2)N](3)RE(III)(μ-Cl)Li(THF)(3) (RE = Y, Yb) led to the discovery of different reactivity patterns with isolation of novel rare-earth metal complexes having a unique indolyl-1,2-dianion in a novel η(1):(μ(2)-η(1):η(1)) bonding mode through C-H activation.

  11. Copper catalyzed N-arylation of amidines with aryl boronic acids and one-pot synthesis of benzimidazoles by a Chan-Lam-Evans N-arylation and C-H activation/C-N bond forming process.

    PubMed

    Li, Jihui; Bénard, Sébastien; Neuville, Luc; Zhu, Jieping

    2012-12-01

    Mono-N-arylation of benzamidines 1 with aryl boronic acids 2 was effectively achieved in the presence of a catalytic amount of Cu(OAc)(2) and NaOPiv under mild aerobic conditions. Combining this step with an intramolecular direct C-H bond functionalization, catalyzed by the same catalytic system but under oxygen at 120 °C, afforded benzimidazoles 3 in good to excellent yields. PMID:23151245

  12. Reversible conversion of valence-tautomeric copper metal-organic frameworks dependent single-crystal-to-single-crystal oxidation/reduction: a redox-switchable catalyst for C-H bonds activation reaction.

    PubMed

    Huang, Chao; Wu, Jie; Song, Chuanjun; Ding, Ran; Qiao, Yan; Hou, Hongwei; Chang, Junbiao; Fan, Yaoting

    2015-06-28

    Upon single-crystal-to-single-crystal (SCSC) oxidation/reduction, reversible structural transformations take place between the anionic porous zeolite-like Cu(I) framework and a topologically equivalent neutral Cu(I)Cu(II) mixed-valent framework. The unique conversion behavior of the Cu(I) framework endowed it as a redox-switchable catalyst for the direct arylation of heterocycle C-H bonds.

  13. Metabolism of Hydrocarbons in n-Alkane-Utilizing Anaerobic Bacteria.

    PubMed

    Wilkes, Heinz; Buckel, Wolfgang; Golding, Bernard T; Rabus, Ralf

    2016-01-01

    The glycyl radical enzyme-catalyzed addition of n-alkanes to fumarate creates a C-C-bond between two concomitantly formed stereogenic carbon centers. The configurations of the two diastereoisomers of the product resulting from n-hexane activation by the n-alkane-utilizing denitrifying bacterium strain HxN1, i.e. (1-methylpentyl)succinate, were assigned as (2S,1'R) and (2R,1'R). Experiments with stereospecifically deuterated n-(2,5-2H2)hexanes revealed that exclusively the pro-S hydrogen atom is abstracted from C2 of the n-alkane by the enzyme and later transferred back to C3 of the alkylsuccinate formed. These results indicate that the alkylsuccinate-forming reaction proceeds with an inversion of configuration at the carbon atom (C2) of the n-alkane forming the new C-C-bond, and thus stereochemically resembles a SN2-type reaction. Therefore, the reaction may occur in a concerted manner, which may avoid the highly energetic hex-2-yl radical as an intermediate. The reaction is associated with a significant primary kinetic isotope effect (kH/kD ≥3) for hydrogen, indicating that the homolytic C-H-bond cleavage is involved in the first irreversible step of the reaction mechanism. The (1-methylalkyl)succinate synthases of n-alkane-utilizing anaerobic bacteria apparently have very broad substrate ranges enabling them to activate not only aliphatic but also alkyl-aromatic hydrocarbons. Thus, two denitrifiers and one sulfate reducer were shown to convert the nongrowth substrate toluene to benzylsuccinate and further to the dead-end product benzoyl-CoA. For this purpose, however, the modified β-oxidation pathway known from alkylbenzene-utilizing bacteria was not employed, but rather the pathway used for n-alkane degradation involving CoA ligation, carbon skeleton rearrangement and decarboxylation. Furthermore, various n-alkane- and alkylbenzene-utilizing denitrifiers and sulfate reducers were found to be capable of forming benzyl alcohols from diverse alkylbenzenes

  14. A versatile tripodal Cu(I) reagent for C-N bond construction via nitrene-transfer chemistry: catalytic perspectives and mechanistic insights on C-H aminations/amidinations and olefin aziridinations.

    PubMed

    Bagchi, Vivek; Paraskevopoulou, Patrina; Das, Purak; Chi, Lingyu; Wang, Qiuwen; Choudhury, Amitava; Mathieson, Jennifer S; Cronin, Leroy; Pardue, Daniel B; Cundari, Thomas R; Mitrikas, George; Sanakis, Yiannis; Stavropoulos, Pericles

    2014-08-13

    A Cu(I) catalyst (1), supported by a framework of strongly basic guanidinato moieties, mediates nitrene-transfer from PhI═NR sources to a wide variety of aliphatic hydrocarbons (C-H amination or amidination in the presence of nitriles) and olefins (aziridination). Product profiles are consistent with a stepwise rather than concerted C-N bond formation. Mechanistic investigations with the aid of Hammett plots, kinetic isotope effects, labeled stereochemical probes, and radical traps and clocks allow us to conclude that carboradical intermediates play a major role and are generated by hydrogen-atom abstraction from substrate C-H bonds or initial nitrene-addition to one of the olefinic carbons. Subsequent processes include solvent-caged radical recombination to afford the major amination and aziridination products but also one-electron oxidation of diffusively free carboradicals to generate amidination products due to carbocation participation. Analyses of metal- and ligand-centered events by variable temperature electrospray mass spectrometry, cyclic voltammetry, and electron paramagnetic resonance spectroscopy, coupled with computational studies, indicate that an active, but still elusive, copper-nitrene (S = 1) intermediate initially abstracts a hydrogen atom from, or adds nitrene to, C-H and C═C bonds, respectively, followed by a spin flip and radical rebound to afford intra- and intermolecular C-N containing products. PMID:25025754

  15. Designing a Cu(II)-ArCu(II)-ArCu(III)-Cu(I) catalytic cycle: Cu(II)-catalyzed oxidative arene C-H bond azidation with air as an oxidant under ambient conditions.

    PubMed

    Yao, Bo; Liu, Yang; Zhao, Liang; Wang, De-Xian; Wang, Mei-Xiang

    2014-11-21

    On the basis of our recent discovery of high valent organocopper compounds, we have designed and achieved efficient copper(II)-catalyzed oxidative arene C-H bond azidation under very mild aerobic conditions by using NaN3 as an azide source. In the presence of a Cu(II) catalyst, a number of azacalix[1]arene[3]pyridines underwent direct arene C-H bond cupration through an electrophilic aromatic metalation pathway to form an arylcopper(II) intermediate. Oxidized by a free copper(II) ion, the arylcopper(II) intermediate was transformed into an arylcopper(III) species that subsequently cross-coupled with azide to furnish the formation of aryl azide products with the release of a copper(I) ion. Under ambient catalytic reaction conditions, the copper(I) species generated was oxidized by air into copper(II), which entered into the next catalytic cycle. Application of the method was demonstrated by the synthesis of functional azacalix[1]arene[3]pyridines by means of simple and practical functional group transformations of azide. The showcase of the Cu(II)-ArCu(II)-ArCu(III)-Cu(I) catalytic cycle would provide a new strategy for the design of copper(II)-catalyzed aerobic oxidative arene C-H bond activation and transformations.

  16. Designing a Cu(II)-ArCu(II)-ArCu(III)-Cu(I) catalytic cycle: Cu(II)-catalyzed oxidative arene C-H bond azidation with air as an oxidant under ambient conditions.

    PubMed

    Yao, Bo; Liu, Yang; Zhao, Liang; Wang, De-Xian; Wang, Mei-Xiang

    2014-11-21

    On the basis of our recent discovery of high valent organocopper compounds, we have designed and achieved efficient copper(II)-catalyzed oxidative arene C-H bond azidation under very mild aerobic conditions by using NaN3 as an azide source. In the presence of a Cu(II) catalyst, a number of azacalix[1]arene[3]pyridines underwent direct arene C-H bond cupration through an electrophilic aromatic metalation pathway to form an arylcopper(II) intermediate. Oxidized by a free copper(II) ion, the arylcopper(II) intermediate was transformed into an arylcopper(III) species that subsequently cross-coupled with azide to furnish the formation of aryl azide products with the release of a copper(I) ion. Under ambient catalytic reaction conditions, the copper(I) species generated was oxidized by air into copper(II), which entered into the next catalytic cycle. Application of the method was demonstrated by the synthesis of functional azacalix[1]arene[3]pyridines by means of simple and practical functional group transformations of azide. The showcase of the Cu(II)-ArCu(II)-ArCu(III)-Cu(I) catalytic cycle would provide a new strategy for the design of copper(II)-catalyzed aerobic oxidative arene C-H bond activation and transformations. PMID:25350606

  17. Synthesis and reactivity of silyl ruthenium complexes: the importance of trans effects in C-H activation, Si-C bond formation, and dehydrogenative coupling of silanes.

    PubMed

    Dioumaev, Vladimir K; Procopio, Leo J; Carroll, Patrick J; Berry, Donald H

    2003-07-01

    with PMe(3) or PMe(3)-d(9) - is also regioselective (1a-d(9)() is predominantly produced with PMe(3)-d(9) trans to Si), but is very unfavorable. At 70 degrees C, a slower but irreversible SiH elimination also occurs and furnishes (PMe(3))(4)RuH(2). The structure of 4a exhibits a tetrahedral P(3)Si environment around the metal with the three hydrides adjacent to silicon and capping the P(2)Si faces. Although strong Si...HRu interactions are not indicated in the structure or by IR, the HSi distances (2.13-2.23(5) A) suggest some degree of nonclassical SiH bonding in the H(3)SiR(3) fragment. Thermolysis of 1a in C(6)D(6) at 45-55 degrees C leads to an intermolecular CD activation of C(6)D(6). Extensive H/D exchange into the hydride, SiMe(3), and PMe(3) ligands is observed, followed by much slower formation of cis-(PMe(3))(4)Ru(D)(Ph-d(5)). In an even slower intramolecular CH activation process, (PMe(3))(3)Ru(eta(2)-CH(2)PMe(2))H (5) is also produced. The structure of intermediates, mechanisms, and aptitudes for PMe(3) dissociation and addition/elimination of H-H, Si-H, C-Si, and C-H bonds in these systems are discussed with a special emphasis on the trans effect and trans influence of silicon and ramifications for SiC coupling catalysis. PMID:12823028

  18. Nickel-Catalyzed Ortho-Arylation of Unactivated (Hetero)aryl C-H Bonds with Arylsilanes Using a Removable Auxiliary.

    PubMed

    Zhao, Sheng; Liu, Bin; Zhan, Bei-Bei; Zhang, Wei-Dong; Shi, Bing-Feng

    2016-09-16

    Ni(II)-catalyzed ortho-arylation of aromatic and heteroaromatic carboxamides with triethoxy(aryl)silanes assisted by a removable bidentate auxiliary is reported. This transformation features a broad substrate scope, good functional group tolerance, and compatibility with heterocyclic substrates. Compared to the well-established Ni(II)-catalyzed C-H arylation with ArX or aryliodonium salts via oxidative addition, this reaction proceeded via a fluoride-promoted transmetalation. PMID:27571141

  19. An elusive hydridoaluminum(I) complex for facile C-H and C-O bond activation of ethers and access to its isolable hydridogallium(I) analogue: syntheses, structures, and theoretical studies.

    PubMed

    Tan, Gengwen; Szilvási, Tibor; Inoue, Shigeyoshi; Blom, Burgert; Driess, Matthias

    2014-07-01

    The reaction of AlBr3 with 1 molar equiv of the chelating bis(N-heterocyclic carbene) ligand bis(N-Dipp-imidazole-2-ylidene)methylene (bisNHC, 1) affords [(bisNHC)AlBr2](+)Br(-) (2) as an ion pair in high yield, representing the first example of a bisNHC-Al(III) complex. Debromination of the latter with 1 molar equiv of K2Fe(CO)4 in tetrahydrofuran (THF) furnishes smoothly, in a redox reaction, the (bisNHC)(Br)Al[Fe(CO)4] complex 3, in which the Al(I) center is stabilized by the Fe(CO)4 moiety through Al(I):→Fe(0) coordination. Strikingly, the Br/H ligand exchange reactions of 3 using potassium hydride as a hydride source in THF or tetrahydropyran (THP) do not yield the anticipated hydridoaluminum(I) complex (bisNHC)Al(H)[Fe(CO)4] (4a) but instead lead to (bisNHC)Al(2-cyclo-OC4H7)[Fe(CO)4] (4) and (bisNHC)Al(2-cyclo-OC5H9)[Fe(CO)4] (5), respectively. The latter are generated via C-H bond activation at the α-carbon positions of THF and THP, respectively, in good yields with concomitant elimination of dihydrogen. This is the first example whereby a low-valent main-group hydrido complex facilitates metalation of sp(3) C-H bonds. Interestingly, when K[BHR3] (R = Et, sBu) is employed as a hydride source to react with 3 in THF, the reaction affords (bisNHC)Al(OnBu)[Fe(CO)4] (6) as the sole product through C-O bond activation and ring opening of THF. The mechanisms for these novel C-H and C-O bond activations mediated by the elusive hydridoaluminum(I) complex 4a were elucidated by density functional theory (DFT) calculations. In contrast, the analogous hydridogallium(I) complex (bisNHC)Ga(H)[Fe(CO)4] (9) can be obtained directly in high yield by the reaction of the (bisNHC)Ga(Cl)[Fe(CO)4] precursor 8 with 1 molar equiv of K[BHR3] (R = Et, sBu) in THF at room temperature. The isolation of 9 and its inertness toward cyclic ethers might be attributed to the higher electronegativity of gallium versus aluminum. The stronger Ga(I)-H bond, in turn, hampers α-C-H metalation

  20. Rh(III)-Catalyzed Synthesis of N-Unprotected Indoles from Imidamides and Diazo Ketoesters via C-H Activation and C-C/C-N Bond Cleavage.

    PubMed

    Qi, Zisong; Yu, Songjie; Li, Xingwei

    2016-02-19

    The synthesis of N-unprotected indoles has been realized via Rh(III)-catalyzed C-H activation/annulation of imidamides with α-diazo β-ketoesters. The reaction occurs with the release of an amide coproduct, which originates from both the imidamide and the diazo as a result of C═N cleavage of the imidamide and C-C(acyl) cleavage of the diazo. A rhodacyclic intermediate has been isolated and a plausible mechanism has been proposed. PMID:26824751

  1. Intermolecular interactions involving C-H bonds, 3, Structure and energetics of the interaction between CH{sub 4} and CN{sup {minus}}

    SciTech Connect

    Novoa, J.J.; Whangbo, Myung-Hwan; Williams, J.M.

    1991-12-31

    On the basis of SCF and single reference MP2 calculations, the full potential energy surface of the interaction between CH{sub 4} and CN{sup {minus}} was studied using extended basis sets of up to near Hartree-Fock limit quality. Colinear arrangements C-N{sup {minus}}{hor_ellipsis}H-CH{sub 3} and N-C{sup {minus}}{hor_ellipsis}H-CH{sub 3} are found to be the only two energy minima. The binding energies of these two structures are calculated to be 2.5 and 2.1 kcal/mol, respectively, at the MP2 level. The full vibrational analyses of two structures show a red shift of about 30 cm{sup {minus}1} for the v{sub s} C-H stretching.

  2. Synthesis and catalytic applications of 1,2,3-triazolylidene gold(i) complexes in silver-free oxazoline syntheses and C-H bond activation.

    PubMed

    Pretorius, René; Fructos, Manuel R; Müller-Bunz, Helge; Gossage, Robert A; Pérez, Pedro J; Albrecht, Martin

    2016-10-01

    A series of novel 1,2,3-triazolylidene gold(i) chloride complexes have been synthesised and fully characterised. Silver-free methodologies for chloride ion abstraction of these complexes were evaluated for their potential as Au-based catalyst precursors. Using simple potassium salts or MeOTf as chloride scavengers produced metal complexes that catalyse both the regioselective synthesis of oxazolines and the C-H activation of benzene or styrene for carbene transfer from ethyl diazoacetate. These results indicate that Ag-free activation of 1,2,3-triazolylidene gold(i) chloride complexes is feasible for the generation of catalytically active Au triazolylidene species. However, silver-mediated activation imparts substantially higher catalytic activity in oxazoline synthesis. PMID:27363515

  3. High-order harmonic generation in alkanes

    SciTech Connect

    Altucci, C.; Velotta, R.; Heesel, E.; Springate, E.; Marangos, J. P.; Vozzi, C.; Benedetti, E.; Calegari, F.; Sansone, G.; Stagira, S.; Nisoli, M.; Tosa, V.

    2006-04-15

    We have investigated the process of high-order harmonic generation in light alkanes by using femtosecond laser pulses. We show the experimental results cannot be matched by a model that assumes a single active electron only in a hydrogenic s orbital. Clear evidences are shown of the important role played by the p-like character originating from the covalent C-H bond. By constructing a suitable mixture of s-type and p-type atomic wave functions, an excellent agreement between measurements in methane and simulations is found, thus confirming the validity of the developed method as a general tool for the analysis of high-order harmonic generation in complex molecules.

  4. Model-free estimation of the effective correlation time for C-H bond reorientation in amphiphilic bilayers: 1H-13C solid-state NMR and MD simulations

    NASA Astrophysics Data System (ADS)

    Ferreira, Tiago Mendes; Ollila, O. H. Samuli; Pigliapochi, Roberta; Dabkowska, Aleksandra P.; Topgaard, Daniel

    2015-01-01

    Molecular dynamics (MD) simulations give atomically detailed information on structure and dynamics in amphiphilic bilayer systems on timescales up to about 1 μs. The reorientational dynamics of the C-H bonds is conventionally verified by measurements of 13C or 2H nuclear magnetic resonance (NMR) longitudinal relaxation rates R1, which are more sensitive to motional processes with correlation times close to the inverse Larmor frequency, typically around 1-10 ns on standard NMR instrumentation, and are thus less sensitive to the 10-1000 ns timescale motion that can be observed in the MD simulations. We propose an experimental procedure for atomically resolved model-free estimation of the C-H bond effective reorientational correlation time τe, which includes contributions from the entire range of all-atom MD timescales and that can be calculated directly from the MD trajectories. The approach is based on measurements of 13C R1 and R1ρ relaxation rates, as well as 1H-13C dipolar couplings, and is applicable to anisotropic liquid crystalline lipid or surfactant systems using a conventional solid-state NMR spectrometer and samples with natural isotopic composition. The procedure is demonstrated on a fully hydrated lamellar phase of 1-palmitoyl-2-oleoyl-phosphatidylcholine, yielding values of τe from 0.1 ns for the methyl groups in the choline moiety and at the end of the acyl chains to 3 ns for the g1 methylene group of the glycerol backbone. MD simulations performed with a widely used united-atom force-field reproduce the τe-profile of the major part of the acyl chains but underestimate the dynamics of the glycerol backbone and adjacent molecular segments. The measurement of experimental τe-profiles can be used to study subtle effects on C-H bond reorientational motions in anisotropic liquid crystals, as well as to validate the C-H bond reorientation dynamics predicted in MD simulations of amphiphilic bilayers such as lipid membranes.

  5. Yttrium-Assisted C-H and C-C Bond Activation of Ethylene Probed by Mass-Analyzed Threshold Ionization Spectroscopy

    NASA Astrophysics Data System (ADS)

    Kim, Jong Hyun; Yang, Dong-Sheng

    2016-06-01

    The reaction between Y atom and ethylene (CH2=CH2) was performed in a laser-ablation supersonic molecular beam source. Y(C2H2), Y(C2H4), and Y(C4H6) were observed by time-of-flight mass spectrometry and investigated with mass-analyzed threshold ionization (MATI) spectroscopy and theoretical calculations. Y(C2H2) is formed by hydrogen elimination, Y(C2H4) by simple association, and La(C4H6) by C-C bond coupling and dehydrogenation. Both Y(C2H2) and Y(C2H4) have a C2v triangular structure with a C=C double bond in Y(C2H2) and a C-C single bond in Y(C2H4). Y(C4H6) has a five-membered metallacyclic structure (Cs) with Y binding to the two terminal carbon atoms of butene, which is the exactly same as that of Y(C4H6) formed in the Y + 1-butene reaction. For all three complexes, ionization has a small effect on the metal-carbon bond lengths because the rejected electron has basically a Y 5s character. The adiabatic ionization energies are measured to be 45679(5) wn for Y(C2H2), 45603(5) wn for Y(C2H4) and 43475(5) wn for Y(C4H6). The metal-ligand stretching frequencies of the three complexes are also measured from the MATI spectra.

  6. Intermolecular C-H bond activation of benzene and pyridines by a vanadium(III) alkylidene including a stepwise conversion of benzene to a vanadium-benzyne complex

    SciTech Connect

    Andino, José G; Kilgore, Uriah J; Pink, Maren; Ozarowski, Andrew; Krzystek, J; Telser, Joshua; Baik, Mu-Hyun; Mindiola, Daniel J

    2012-01-20

    Breaking of the carbon-hydrogen bond of benzene and pyridine is observed with (PNP)V(CH2tBu)2 (1), and in the case of benzene, the formation of an intermediate benzyne complex (C) is proposed, and indirect proof of its intermediacy is provided by identification of (PNP)V=O(η2-C6H4) in combination with DFT calculations.

  7. s-trans-1,3-butadiene and isotopomers: vibrational spectra, scaled quantum-chemical force fields, fermi resonances, and C-H bond properties.

    PubMed

    McKean, Donald C; Craig, Norman C; Panchenko, Yurii N

    2006-07-01

    Quadratic quantum-chemical force fields have been determined for s-trans-1,3-butadiene using B3LYP and MP2 methods. Basis sets included 6-311++G, cc-pVTZ, and aug-cc-pVTZ. Scaling of the force fields was based on frequency data for up to 11 isotopomers, some of these data being original. A total of 18 scale factors were employed, with, in addition, an alteration to one off-diagonal force constant in the A(u) species. MP2 calculations without f functions in the basis perform badly in respect of out-of-plane bending mode frequencies. Centrifugal distortion constants and harmonic contributions to vibration-rotation constants (alphas) have been calculated. Existing experimental frequency data for all isotopomers are scrutinized, and a number of reassignments and diagnoses of Fermi resonance made, particularly in the nu(CH) region. The three types of CH bond in butadiene were characterized in terms of bond length and isolated CH stretching frequency, the latter reflecting data in the nu(CD) region. Broad agreement was achieved with earlier results from local mode studies. Differences in CH bond properties resemble similar differences in propene. A simplified sample setup for recording FT-Raman spectra of gases was applied to four isotopomers of butadiene.

  8. Four-Electron-Donor Hemilabile N3-PPh3 Ligand that Binds through a C=C Bond Rather than an Agostic C-H Interaction, and Displaceement of the C=C by Methyl Iodide or Water

    SciTech Connect

    Cheng,T.; Szalda, D.; Hanson, J.; Muckerman, J.; Bullock, R.

    2008-01-01

    Hydride transfer from Cp(CO)2(PPh3)MoH to Ph3C+BAr'4- [Ar' = 3,5-bis(trifluoromethyl)phenyl] produces [Cp(CO)2(3-PPh3)Mo]+[BAr'4]-. Spectroscopic and crystallographic data indicate that one C{double_bond}C of a Ph ring is weakly bound to the Mo, so that the PPh3 ligand is a four-electron-donor ligand. Computations (DFT/B3LYP and MP2 on [Cp(CO)2(3-PPh3)Mo]+ and [Cp(CO)2(3-PH2Ph)Mo]+, and DFT/B3LYP on [Cp(CO)2(3-PHtBuPh)Mo]+ and [Cp(CO)2(3-PH2Ph)Nb]) provide further information on the bonding and on the preference for bonding of the metal to the C{double_bond}C bond rather than an agostic C-H interaction found in many related complexes. The hemilabile C{double_bond}C bond is readily displaced by CH3I or H2O, and crystal structures are reported for [Cp(CO)2(PPh3)Mo(ICH3)]+ and [Cp(CO)2(PPh3)Mo(OH2)]+. The equilibrium constant for [Cp(CO)2(3-PPh3)Mo]+ + ICH3 to give [Cp(CO)2(PPh3)Mo(ICH3)]+ is Keq = 5.2 x 102 M-1 in CD2Cl2 at 22 C.

  9. Dihydrogen catalysis of the reversible formation and cleavage of C-H and N-H bonds of aminopyridinate ligands bound to (η(5) -C5 Me5 )Ir(III.).

    PubMed

    Zamorano, Ana; Rendón, Nuria; López-Serrano, Joaquín; Valpuesta, José E V; Álvarez, Eleuterio; Carmona, Ernesto

    2015-02-01

    This study focuses on a series of cationic complexes of iridium that contain aminopyridinate (Ap) ligands bound to an (η(5) -C5 Me5 )Ir(III) fragment. The new complexes have the chemical composition [Ir(Ap)(η(5) -C5 Me5 )](+) , exist in the form of two isomers (1(+) and 2(+) ) and were isolated as salts of the BArF (-) anion (BArF =B[3,5-(CF3 )2 C6 H3 ]4 ). Four Ap ligands that differ in the nature of their bulky aryl substituents at the amido nitrogen atom and pyridinic ring were employed. In the presence of H2 , the electrophilicity of the Ir(III) centre of these complexes allows for a reversible prototropic rearrangement that changes the nature and coordination mode of the aminopyridinate ligand between the well-known κ(2) -N,N'-bidentate binding in 1(+) and the unprecedented κ-N,η(3) -pseudo-allyl-coordination mode in isomers 2(+) through activation of a benzylic C-H bond and formal proton transfer to the amido nitrogen atom. Experimental and computational studies evidence that the overall rearrangement, which entails reversible formation and cleavage of H-H, C-H and N-H bonds, is catalysed by dihydrogen under homogeneous conditions. PMID:25504864

  10. Dihydrogen catalysis of the reversible formation and cleavage of C-H and N-H bonds of aminopyridinate ligands bound to (η(5) -C5 Me5 )Ir(III.).

    PubMed

    Zamorano, Ana; Rendón, Nuria; López-Serrano, Joaquín; Valpuesta, José E V; Álvarez, Eleuterio; Carmona, Ernesto

    2015-02-01

    This study focuses on a series of cationic complexes of iridium that contain aminopyridinate (Ap) ligands bound to an (η(5) -C5 Me5 )Ir(III) fragment. The new complexes have the chemical composition [Ir(Ap)(η(5) -C5 Me5 )](+) , exist in the form of two isomers (1(+) and 2(+) ) and were isolated as salts of the BArF (-) anion (BArF =B[3,5-(CF3 )2 C6 H3 ]4 ). Four Ap ligands that differ in the nature of their bulky aryl substituents at the amido nitrogen atom and pyridinic ring were employed. In the presence of H2 , the electrophilicity of the Ir(III) centre of these complexes allows for a reversible prototropic rearrangement that changes the nature and coordination mode of the aminopyridinate ligand between the well-known κ(2) -N,N'-bidentate binding in 1(+) and the unprecedented κ-N,η(3) -pseudo-allyl-coordination mode in isomers 2(+) through activation of a benzylic C-H bond and formal proton transfer to the amido nitrogen atom. Experimental and computational studies evidence that the overall rearrangement, which entails reversible formation and cleavage of H-H, C-H and N-H bonds, is catalysed by dihydrogen under homogeneous conditions.

  11. Elementary steps of iron catalysis: exploring the links between iron alkyl and iron olefin complexes for their relevance in C-H activation and C-C bond formation.

    PubMed

    Casitas, Alicia; Krause, Helga; Goddard, Richard; Fürstner, Alois

    2015-01-26

    The alkylation of complexes 2 and 7 with Grignard reagents containing β-hydrogen atoms is a process of considerable relevance for the understanding of C-H activation as well as C-C bond formation mediated by low-valent iron species. Specifically, reaction of 2 with EtMgBr under an ethylene atmosphere affords the bis-ethylene complex 1 which is an active precatalyst for prototype [2+2+2] cycloaddition reactions and a valuable probe for mechanistic studies. This aspect is illustrated by its conversion into the bis-alkyne complex 6 as an unprecedented representation of a cycloaddition catalyst loaded with two substrates molecules. On the other hand, alkylation of 2 with 1 equivalent of cyclohexylmagnesium bromide furnished the unique iron alkyl species 11 with a 14-electron count, which has no less than four β-H atoms but is nevertheless stable at low temperature against β-hydride elimination. In contrast, the exhaustive alkylation of 1 with cyclohexylmagnesium bromide triggers two consecutive C-H activation reactions mediated by a single iron center. The resulting complex has a diene dihydride character in solution (15), whereas its structure in the solid state is more consistent with an η(3) -allyl iron hydride rendition featuring an additional agostic interaction (14). Finally, the preparation of the cyclopentadienyl iron complex 25 illustrates how an iron-mediated C-H activation cascade can be coaxed to induce a stereoselective CC bond formation. The structures of all relevant new iron complexes in the solid state are presented. PMID:25504935

  12. Toluene and Ethylbenzene Aliphatic C-H Bond Oxidations Initiated by a Dicopper(II)-μ-1,2-Peroxo Complex

    PubMed Central

    Lucas, Heather R.; Li, Lei; Sarjeant, Amy A. Narducci; Vance, Michael A.; Solomon, Edward I.; Karlin, Kenneth D.

    2009-01-01

    With an anisole containing polypyridylamine potential tetradentate ligand OL, a μ-1,2-peroxo-dicopper(II) complex [{OLCuII}2(O22-)]2+ forms from the reaction of the mononuclear compound [CuI(OL)(MeCN)]B(C6F5)4(OLCuI) with O2 in non-coordinating solvents at -80 °C. Thermal decay of this peroxo complex in the presence of toluene or ethylbenzene leads to rarely seen C-H activation chemistry; benzaldehyde and acetophenone/1-phenylethanol mixtures, respectively, are formed. Experiments with 18O2 confirm that the oxygen source in the products is molecular O2 and deuterium labeling experiments indicate kH/kD = 7.5 ± 1 for the toluene oxygenation. The O2-reaction of [CuI(BzL)(CH3CN)]+ (BzLCuI) leads to a dicopper(III)-bis-μ-oxo species [{BzLCuIII}2(μ-O2-)2]2+ at -80 °C and from such solutions, very similar toluene oxygenation chemistry occurs. Ligand BzL is a tridentate chelate, possessing the same moiety found in OL, but without the anisole O-atom donor. In these contexts, the nature of the oxidant species in or derived from [{OLCuII}2(O22-)]2+ is discussed and likely mechanisms of reaction initiated by toluene H-atom abstraction chemistry are detailed. To confirm the structural formulations of the dioxygen-adducts, UV-vis and resonance Raman spectroscopic studies have been carried out and these results are reported and compared to previously described systems including [{CuII(PYL)}2(O2)]2+ (PYL =TMPA = tris(2-methylpyridyl)amine). Using (L)CuI, CO-binding properties (i.e., νC-O values) along with electrochemical property comparisons, the relative donor abilities of OL, BzL and PYL are assessed. PMID:19216527

  13. Water as a green solvent for efficient synthesis of isocoumarins through microwave-accelerated and Rh/Cu-catalyzed C-H/O-H bond functionalization

    SciTech Connect

    Li, Qiu; Yan, Yunnan; Wang, Xiaowei; Gong, Binwei; Tang, Xiaobo; Shi, JingJing; Xu, H. Eric; Yi, Wei

    2014-08-14

    Green chemistry that uses water as a solvent has recently received great attention in organic synthesis. Here we report an efficient synthesis of biologically important isocoumarins through direct cleavage of C–H/O–H bonds by microwave-accelerated and Rh/Cu-catalyzed oxidative annulation of various substituted benzoic acids, where water is used as the only solvent in the reactions. The remarkable features of this “green” methodology include high product yields, wide tolerance of various functional groups as substrates, and excellent region-/site-specificities, thus rendering this methodology a highly versatile and eco-friendly alternative to the existing methods for synthesizing isocoumarins and other biologically important derivatives such as isoquinolones.

  14. Single (C-C) and triple (CC) bond-length dependence of the static electric polarizability and hyperpolarizability of H-CC-CC-H

    NASA Astrophysics Data System (ADS)

    Karamanis, Panaghiotis; Maroulis, George

    2003-07-01

    We report an ab initio study of the static electric (hyper)polarizability of diacetylene and its dependence on the single (C-C) and triple (CC) bond length. At the CCSD(T) level of theory we find for the mean dipole polarizability and its derivatives ᾱ=49.10 e2a02Eh-1,( ∂ᾱ/ ∂R C- C) e=-4.41 and ( ∂ᾱ/ ∂R C C) e=34.57 e2a0Eh-1. For the anisotropy Δα=54.45 e2a02Eh-1, (∂Δ α/∂ RC-C) e=-20.42 and ( ∂Δα/ ∂R C C) e=64.56 e2a0Eh-1. The dependence of the mean hyperpolarizability on RC-C and RCC around the equilibrium is quite distinct. Varying the single bond by Δ R/ a0 around the equilibrium entails changes of [ γ¯(R C- C)- γ¯(R e)]/ e4a04Eh-3=-3643 ΔR-230 ΔR 2-184 ΔR 3+453 ΔR 4The mean second hyperpolarizability increases strongly with R C≡C around the equilibrium [ γ¯(R C C)- γ¯(R e)]/ e4a04Eh-3=22 259 ΔR+11 293 ΔR 2+2384 ΔR 3+6445 ΔR 4

  15. Synthesis, X-ray structure, magnetic resonance, and DFT analysis of a soluble copper(II) phthalocyanine lacking C-H bonds.

    PubMed

    Moons, Hans; Łapok, Łukasz; Loas, Andrei; Van Doorslaer, Sabine; Gorun, Sergiu M

    2010-10-01

    The synthesis, crystal structure, and electronic properties of perfluoro-isopropyl-substituted perfluorophthalocyanine bearing a copper atom in the central cavity (F(64)PcCu) are reported. While most halogenated phthalocyanines do not exhibit long-term order sufficient to form large single crystals, this is not the case for F(64)PcCu. Its crystal structure was determined by X-ray analysis and linked to the electronic properties determined by electron paramagnetic resonance (EPR). The findings are corroborated by density functional theory (DFT) computations, which agree well with the experiment. X-band continuous-wave EPR spectra of undiluted F(64)PcCu powder, indicate the existence of isolated metal centers. The electron-withdrawing effect of the perfluoroalkyl (R(f)) groups significantly enhances the complexes solubility in organic solvents like alcohols, including via their axial coordination. This coordination is confirmed by X-band (1)H HYSCORE experiments and is also seen in the solid state via the X-ray structure. Detailed X-band CW-EPR, X-band Davies and Mims ENDOR, and W-band electron spin-echo-detected EPR studies of F(64)PcCu in ethanol allow the determination of the principal g values and the hyperfine couplings of the metal, nitrogen, and fluorine nuclei. Comparison of the g and metal hyperfine values of F(64)PcCu and other PcCu complexes in different matrices reveals a dominant effect of the matrix on these EPR parameters, while variations in the ring substituents have only a secondary effect. The relatively strong axial coordination occurs despite the diminished covalency of the C-N bonds and potentially weakening Jahn-Teller effects. Surprisingly, natural abundance (13)C HYSCORE signals could be observed for a frozen ethanol solution of F(64)PcCu. The (13)C nuclei contributing to the HYSCORE spectra could be identified as the pyrrole carbons by means of DFT. Finally, (19)F ENDOR and easily observable paramagnetic NMR were found to relate well to the

  16. One-Electron Oxidation of [M(P(t) Bu3 )2 ] (M=Pd, Pt): Isolation of Monomeric [Pd(P(t) Bu3 )2 ](+) and Redox-Promoted C-H Bond Cyclometalation.

    PubMed

    Troadec, Thibault; Tan, Sze-Yin; Wedge, Christopher J; Rourke, Jonathan P; Unwin, Patrick R; Chaplin, Adrian B

    2016-03-01

    Oxidation of zero-valent phosphine complexes [M(P(t) Bu3 )2 ] (M=Pd, Pt) has been investigated in 1,2-difluorobenzene solution using cyclic voltammetry and subsequently using the ferrocenium cation as a chemical redox agent. In the case of palladium, a mononuclear paramagnetic Pd(I) derivative was readily isolated from solution and fully characterized (EPR, X-ray crystallography). While in situ electrochemical measurements are consistent with initial one-electron oxidation, the heavier congener undergoes C-H bond cyclometalation and ultimately affords the 14 valence-electron Pt(II) complex [Pt(κ(2) PC -P(t) Bu2 CMe2 CH2 )(P(t) Bu3 )](+) with concomitant formation of [Pt(P(t) Bu3 )2 H](+) .

  17. High Resolution Infrared and Microwave Spectra of NH3-HCCH and NH3-OCS Complexes: Studies of Weak C-H\\cdotsN Hydrogen Bond and Electric Multipole Interactions

    NASA Astrophysics Data System (ADS)

    Liu, Xunchen; Xu, Yunjie

    2011-06-01

    C-H\\cdotsN weak hydrogen bond is of much current interest. We report the first high resolution infrared spectroscopic study of a prototypical C-H\\cdotsN bonded system, i.e. NH3-HCCH, at the vicinity of the ν4 band of NH3. The spectrum has been recorded using an infrared spectrometer equipped with an astigmatic multipass cell aligned for 366 passes and a room temperature external cavity quantum cascade laser at the 6 μm region. The perpendicular band spectrum of symmetric top rotor observed is consistent with the previous microwave and infrared studies at 3 μm. We also extended the previous microwave measurement to higher J and K. For the related NH3-OCS complex, microwave spectrum of J up to 6 and infrared spectrum at the vicinity of the ν4 band of NH3 have been recorded and analyzed for the first time. Comparison has been made with the previously studied isoelectronic complexes such as NH3-N2O and NH3-CO2. The source of the difference will be discussed with the aid of ab initio calculations. G.T. Fraser, K.R. Leopold, and W. Klemperer, J. Chem. Phys. 80(4), 1423, (1984) G. Hilpert, G.T. Fraser, and A.S. Pine, J. Chem. Phys. 105(15), 6183, (1996) G.T. Fraser, D.D. Nelson, JR., G.J. Gerfen, and W. Klemperer, J. Chem. Phys. 83(11), 5442, (1985) G.T. Fraser, K.R. Leopold, and W. Klemperer, J. Chem. Phys. 81(6), 2577, (1984)

  18. Gas-phase study of Fe sup + -benzyne with alkanes

    SciTech Connect

    Yongqing Huang; Freiser, B.S. )

    1989-03-29

    The unimolecular chemistry of Fe{sup +}-benzyne and its reactivity with small alkanes in the gas phase are studied by Fourier transform mass spectrometry (FTMS). Collision-induced dissociation of Fe{sup +}-benzyne yields benzyne loss exclusively. In contrast, photodissociation of Fe{sup +}-benzyne yields not only cleavage of benzyne from Fe{sup +}, but competitive loss of C{sub 2}H{sub 2} and C{sub 4}H{sub 2} as well. The Fe{sup +}-benzyne is formed from chlorobenzene by loss of HCl. This dehydrochlorination of chlorobenzene also occurs in secondary reactions up to six times forming products of the type Fe{sup +}-polyphenylene. Fe{sup +}-benzyne reacts with alkanes larger than methane to form a wide variety of product ions by mechanisms including hydrogenation and methanation of the benzyne ligand. All of the product ions can be explained by mechanisms based on Fe{sup +} insertion into either C-C or C-H bonds as the reaction-initiating step, followed by either alkyl or H migration from Fe{sup +} onto the benzyne ligand or, alternatively, by the migratory insertion of benzyne into a metal-carbon or metal-hydrogen bond. Photodissociation and ion-molecule reaction studies yield a value for the metal-ligand bond energy of D{degree} (Fe{sup +}-benzyne) = 76 {plus minus} 10 kcal/mol.

  19. Seven organic salts assembled from hydrogen-bonds of N-H⋯O, O-H⋯O, and C-H⋯O between acidic compounds and bis(benzimidazole)

    NASA Astrophysics Data System (ADS)

    Jin, Shouwen; Liu, Hui; Gao, Xin Jun; Lin, Zhanghui; Chen, Guqing; Wang, Daqi

    2014-10-01

    Seven crystalline organic acid-base adducts derived from 1,4-bis(benzimidazol-2-yl)butane/1,2-bis(2-benzimidazolyl)-1,2-ethanediol and acidic components (picric acid, 2-hydroxy-5-(phenyldiazenyl)benzoic acid, 5-sulfosalicylic acid, oxalic acid, and 1,5-naphthalenedisulfonic acid) were prepared and characterized by the single crystal X-ray diffraction analysis, IR, mp, and elemental analysis. All of the seven compounds are organic salts involving proton transfer from the acidic components to the bis(benzimidazole). For the salt 3, although a competing carboxyl group is present, it has been observed that only the proton at the -SO3H group is deprotonized rather than the H at the COOH. While in the salt 7, both COOH and SO3H were ionized to exhibit a valence number of -2. For 4, the oxalic acid existed as unionized molecule, monoanion, and dianion simultaneously in one compound. All supramolecular architectures of the organic salts 1-7 involve extensive intermolecular N-H⋯O, O-H⋯O, and C-H⋯O hydrogen bonds as well as other noncovalent interactions. Since the potentially hydrogen bonding phenol group is present in the ortho position to the carboxyl group in 2, 3, and 7, it forms the more facile intramolecular O-H⋯O hydrogen bonding. The role of weak and strong noncovalent interactions in the crystal packing is ascertained. These weak interactions combined, all the complexes displayed 3D framework structure.

  20. The anaerobic degradation of gaseous, nonmethane alkanes - From in situ processes to microorganisms.

    PubMed

    Musat, Florin

    2015-01-01

    The short chain, gaseous alkanes ethane, propane, n- and iso-butane are released in significant amounts into the atmosphere, where they contribute to tropospheric chemistry and ozone formation. Biodegradation of gaseous alkanes by aerobic microorganisms, mostly bacteria and fungi isolated from terrestrial environments, has been known for several decades. The first indications for short chain alkane anaerobic degradation were provided by geochemical studies of deep-sea environments around hydrocarbon seeps, and included the uncoupling of the sulfate-reduction and anaerobic oxidation of methane rates, the consumption of gaseous alkanes in anoxic sediments, or the enrichment in (13)C of gases in interstitial water vs. the source gas. Microorganisms able to degrade gaseous alkanes were recently obtained from deep-sea and terrestrial sediments around hydrocarbon seeps. Up to date, only sulfate-reducing pure or enriched cultures with ethane, propane and n-butane have been reported. The only pure culture presently available, strain BuS5, is affiliated to the Desulfosarcina-Desulfococcus cluster of the Deltaproteobacteria. Other phylotypes involved in gaseous alkane degradation have been identified based on stable-isotope labeling and whole-cell hybridization. Under anoxic conditions, propane and n-butane are activated similar to the higher alkanes, by homolytic cleavage of the C-H bond of a subterminal carbon atom, and addition of the ensuing radical to fumarate, yielding methylalkylsuccinates. An additional mechanism of activation at the terminal carbon atoms was demonstrated for propane, which could in principle be employed also for the activation of ethane. PMID:25904994

  1. Aromatic C-H Bond Functionalization Induced by Electrochemically in Situ Generated Tris(p-bromophenyl)aminium Radical Cation: Cationic Chain Reactions of Electron-Rich Aromatics with Enamides.

    PubMed

    Li, Long-Ji; Jiang, Yang-Ye; Lam, Chiu Marco; Zeng, Cheng-Chu; Hu, Li-Ming; Little, R Daniel

    2015-11-01

    An effective Friedel-Crafts alkylation reaction of electron-rich aromatics with N-vinylamides, induced by electrochemically in situ-generated TBPA radical cation, has been developed; the resulting adducts are produced in good to excellent yields. In the "ex-cell" type electrolysis, TBPA is transformed to its oxidized form in situ and subsequently employed as an electron transfer reagent to initiate a cationic chain reaction. An easily recoverable and reusable polymeric ionic liquid-carbon black (PIL-CB) composite was also utilized as a supporting electrolyte for the electrochemical generation of TBPA cation radical, without sacrificing efficiency or stability after four electrolyses. Cyclic voltammetry analysis and the results of control experiments demonstrate that the reaction of electron-rich aromatics and N-vinylamides occurs via a cationic chain reaction, which takes place though an oxidative activation of a C-H bond of electron-rich aromatics instead of oxidation of the N-vinylamide as previously assumed.

  2. Aromatic C-H Bond Functionalization Induced by Electrochemically in Situ Generated Tris(p-bromophenyl)aminium Radical Cation: Cationic Chain Reactions of Electron-Rich Aromatics with Enamides.

    PubMed

    Li, Long-Ji; Jiang, Yang-Ye; Lam, Chiu Marco; Zeng, Cheng-Chu; Hu, Li-Ming; Little, R Daniel

    2015-11-01

    An effective Friedel-Crafts alkylation reaction of electron-rich aromatics with N-vinylamides, induced by electrochemically in situ-generated TBPA radical cation, has been developed; the resulting adducts are produced in good to excellent yields. In the "ex-cell" type electrolysis, TBPA is transformed to its oxidized form in situ and subsequently employed as an electron transfer reagent to initiate a cationic chain reaction. An easily recoverable and reusable polymeric ionic liquid-carbon black (PIL-CB) composite was also utilized as a supporting electrolyte for the electrochemical generation of TBPA cation radical, without sacrificing efficiency or stability after four electrolyses. Cyclic voltammetry analysis and the results of control experiments demonstrate that the reaction of electron-rich aromatics and N-vinylamides occurs via a cationic chain reaction, which takes place though an oxidative activation of a C-H bond of electron-rich aromatics instead of oxidation of the N-vinylamide as previously assumed. PMID:26444498

  3. Iron-Catalyzed C-H Functionalization Processes.

    PubMed

    Cera, Gianpiero; Ackermann, Lutz

    2016-10-01

    Iron-catalyzed C-H activation has recently emerged as an increasingly powerful tool for the step-economical transformation of unreactive C-H bonds. Particularly, the recent development of low-valent iron catalysis has set the stage for novel C-H activation strategies via chelation assistance. The low-cost, natural abundance, and low toxicity of iron prompted its very recent application in organometallic C-H activation catalysis. An overview of the use of iron catalysis in C-H activation processes is summarized herein up to May 2016. PMID:27573499

  4. Mononuclear Nonheme High-Spin Iron(III)-Acylperoxo Complexes in Olefin Epoxidation and Alkane Hydroxylation Reactions.

    PubMed

    Wang, Bin; Lee, Yong-Min; Clémancey, Martin; Seo, Mi Sook; Sarangi, Ritimukta; Latour, Jean-Marc; Nam, Wonwoo

    2016-02-24

    Mononuclear nonheme high-spin iron(III)-acylperoxo complexes bearing an N-methylated cyclam ligand were synthesized, spectroscopically characterized, and investigated in olefin epoxidation and alkane hydroxylation reactions. In the epoxidation of olefins, epoxides were yielded as the major products with high stereo-, chemo-, and enantioselectivities; cis- and trans-stilbenes were oxidized to cis- and trans-stilbene oxides, respectively. In the epoxidation of cyclohexene, cyclohexene oxide was formed as the major product with a kinetic isotope effect (KIE) value of 1.0, indicating that nonheme iron(III)-acylperoxo complexes prefer C═C epoxidation to allylic C-H bond activation. Olefin epoxidation by chiral iron(III)-acylperoxo complexes afforded epoxides with high enantioselectivity, suggesting that iron(III)-acylperoxo species, not high-valent iron-oxo species, are the epoxidizing agent. In alkane hydroxylation reactions, iron(III)-acylperoxo complexes hydroxylated C-H bonds as strong as those in cyclohexane at -40 °C, wherein (a) alcohols were yielded as the major products with high regio- and stereoselectivities, (b) activation of C-H bonds by the iron(III)-acylperoxo species was the rate-determining step with a large KIE value and good correlation between reaction rates and bond dissociation energies of alkanes, and (c) the oxygen atom in the alcohol product was from the iron(III)-acylperoxo species, not from molecular oxygen. In isotopically labeled water (H2(18)O) experiments, incorporation of (18)O from H2(18)O into oxygenated products was not observed in the epoxidation and hydroxylation reactions. On the basis of mechanistic studies, we conclude that mononuclear nonheme high-spin iron(III)-acylperoxo complexes are strong oxidants capable of oxygenating hydrocarbons prior to their conversion into iron-oxo species via O-O bond cleavage.

  5. Anisotropic a-C:H from Compression of Polyacetylene

    NASA Astrophysics Data System (ADS)

    Bernasconi, M.; Parrinello, M.; Chiarotti, G. L.; Focher, P.; Tosatti, E.

    1996-03-01

    We have simulated the transformation of crystalline trans-polyacetylene into a-C:H under pressure by constant pressure ab initio molecular dynamics. Polyacetylene undergoes a gradual saturation of C-C bonds via chain interlinks, ending up at ~50 GPa with a-C:H containing 80% sp3 carbon atoms. The sp2-->sp3 conversion is irreversible and does not reverse by returning to zero pressure. The final a-C:H is a wide gap insulator and, at variance with the conventionally generated a-C:H, is highly anisotropic keeping some memory of the original polyacetylene chain axis.

  6. Nickel-Catalyzed Aromatic C-H Functionalization.

    PubMed

    Yamaguchi, Junichiro; Muto, Kei; Itami, Kenichiro

    2016-08-01

    Catalytic C-H functionalization using transition metals has received significant interest from organic chemists because it provides a new strategy to construct carbon-carbon bonds and carbon-heteroatom bonds in highly functionalized, complex molecules without pre-functionalization. Recently, inexpensive catalysts based on transition metals such as copper, iron, cobalt, and nickel have seen more use in the laboratory. This review describes recent progress in nickel-catalyzed aromatic C-H functionalization reactions classified by reaction types and reaction partners. Furthermore, some reaction mechanisms are described and cutting-edge syntheses of natural products and pharmaceuticals using nickel-catalyzed aromatic C-H functionalization are presented. PMID:27573407

  7. The mechanism of stereospecific C-H oxidation by Fe(Pytacn) complexes: bioinspired non-heme iron catalysts containing cis-labile exchangeable sites.

    PubMed

    Prat, Irene; Company, Anna; Postils, Verònica; Ribas, Xavi; Que, Lawrence; Luis, Josep M; Costas, Miquel

    2013-05-17

    A detailed mechanistic study of the hydroxylation of alkane C-H bonds using H2O2 by a family of mononuclear non heme iron catalysts with the formula [Fe(II)(CF3SO3)2(L)] is described, in which L is a tetradentate ligand containing a triazacyclononane tripod and a pyridine ring bearing different substituents at the α and γ positions, which tune the electronic or steric properties of the corresponding iron complexes. Two inequivalent cis-labile exchangeable sites, occupied by triflate ions, complete the octahedral iron coordination sphere. The C-H hydroxylation mediated by this family of complexes takes place with retention of configuration. Oxygen atoms from water are incorporated into hydroxylated products and the extent of this incorporation depends in a systematic manner on the nature of the catalyst, and the substrate. Mechanistic probes and isotopic analyses, in combination with detailed density functional theory (DFT) calculations, provide strong evidence that C-H hydroxylation is performed by highly electrophilic [Fe(V)(O)(OH)L] species through a concerted asynchronous mechanism, involving homolytic breakage of the C-H bond, followed by rebound of the hydroxyl ligand. The [Fe(V)(O)(OH)L] species can exist in two tautomeric forms, differing in the position of oxo and hydroxide ligands. Isotopic-labeling analysis shows that the relative reactivities of the two tautomeric forms are sensitively affected by the α substituent of the pyridine, and this reactivity behavior is rationalized by computational methods.

  8. Enzyme-controlled nitrogen-atom transfer enables regiodivergent C-H amination.

    PubMed

    Hyster, Todd K; Farwell, Christopher C; Buller, Andrew R; McIntosh, John A; Arnold, Frances H

    2014-11-01

    We recently demonstrated that variants of cytochrome P450BM3 (CYP102A1) catalyze the insertion of nitrogen species into benzylic C-H bonds to form new C-N bonds. An outstanding challenge in the field of C-H amination is catalyst-controlled regioselectivity. Here, we report two engineered variants of P450BM3 that provide divergent regioselectivity for C-H amination-one favoring amination of benzylic C-H bonds and the other favoring homo-benzylic C-H bonds. The two variants provide nearly identical kinetic isotope effect values (2.8-3.0), suggesting that C-H abstraction is rate-limiting. The 2.66-Å crystal structure of the most active enzyme suggests that the engineered active site can preorganize the substrate for reactivity. We hypothesize that the enzyme controls regioselectivity through localization of a single C-H bond close to the iron nitrenoid.

  9. Cobalt-Catalyzed Oxidative C-H/C-H Cross-Coupling between Two Heteroarenes.

    PubMed

    Tan, Guangying; He, Shuang; Huang, Xiaolei; Liao, Xingrong; Cheng, Yangyang; You, Jingsong

    2016-08-22

    The first example of cobalt-catalyzed oxidative C-H/C-H cross-coupling between two heteroarenes is reported, which exhibits a broad substrate scope and a high tolerance level for sensitive functional groups. When the amount of Co(OAc)2 ⋅4 H2 O is reduced from 6.0 to 0.5 mol %, an excellent yield is still obtained at an elevated temperature with a prolonged reaction time. The method can be extended to the reaction between an arene and a heteroarene. It is worth noting that the Ag2 CO3 oxidant is renewable. Preliminary mechanistic studies by radical trapping experiments, hydrogen/deuterium exchange experiments, kinetic isotope effect, electron paramagnetic resonance (EPR), and high resolution mass spectrometry (HRMS) suggest that a single electron transfer (SET) pathway is operative, which is distinctly different from the dual C-H bond activation pathway that the well-described oxidative C-H/C-H cross-coupling reactions between two heteroarenes typically undergo. PMID:27460406

  10. Cobalt-Catalyzed Oxidative C-H/C-H Cross-Coupling between Two Heteroarenes.

    PubMed

    Tan, Guangying; He, Shuang; Huang, Xiaolei; Liao, Xingrong; Cheng, Yangyang; You, Jingsong

    2016-08-22

    The first example of cobalt-catalyzed oxidative C-H/C-H cross-coupling between two heteroarenes is reported, which exhibits a broad substrate scope and a high tolerance level for sensitive functional groups. When the amount of Co(OAc)2 ⋅4 H2 O is reduced from 6.0 to 0.5 mol %, an excellent yield is still obtained at an elevated temperature with a prolonged reaction time. The method can be extended to the reaction between an arene and a heteroarene. It is worth noting that the Ag2 CO3 oxidant is renewable. Preliminary mechanistic studies by radical trapping experiments, hydrogen/deuterium exchange experiments, kinetic isotope effect, electron paramagnetic resonance (EPR), and high resolution mass spectrometry (HRMS) suggest that a single electron transfer (SET) pathway is operative, which is distinctly different from the dual C-H bond activation pathway that the well-described oxidative C-H/C-H cross-coupling reactions between two heteroarenes typically undergo.

  11. Heterocycle Synthesis via Direct C-H/N-H Coupling

    PubMed Central

    Nadres, Enrico T.; Daugulis, Olafs

    2012-01-01

    A method for five- and six-membered heterocycle formation by palladium-catalyzed C-H/N-H coupling is presented. The method employs a picolinamide directing group, PhI(OAc)2 oxidant, and toluene solvent at 80–120 °C. Cyclization is effective for sp2 as well as aliphatic and benzylic sp3 C-H bonds. PMID:22206416

  12. Catalytic conversion of light alkanes

    SciTech Connect

    Lyons, J.E.

    1992-06-30

    The second Quarterly Report of 1992 on the Catalytic Conversion of Light Alkanes reviews the work done between April 1, 1992 and June 31, 1992 on the Cooperative Agreement. The mission of this work is to devise a new catalyst which can be used in a simple economic process to convert the light alkanes in natural gas to oxygenate products that can either be used as clean-burning, high octane liquid fuels, as fuel components or as precursors to liquid hydrocarbon uwspomdon fuel. During the past quarter we have continued to design, prepare, characterize and test novel catalysts for the mild selective reaction of light hydrocarbons with air or oxygen to produce alcohols directly. These catalysts are designed to form active metal oxo (MO) species and to be uniquely active for the homolytic cleavage of the carbon-hydrogen bonds in light alkanes producing intermediates which can form alcohols. We continue to investigate three molecular environments for the active catalytic species that we are trying to generate: electron-deficient macrocycles (PHASE I), polyoxometallates (PHASE II), and regular oxidic lattices including zeolites and related structures as well as other molecular surface structures having metal oxo groups (PHASE I).

  13. Theoretical study on the electronic and molecular structures of (C sub 5 H sub 5 )M(L) (M = Rh, Ir; L = CO, PH sub 3 ) and M(CO) sub 4 (M = Ru, Os) and their ability to activate the C-H bond in methane

    SciTech Connect

    Ziegler, T.; Tschinke, V.; Fan, L.; Becke, A.D. )

    1989-12-20

    Nonlocal density functional calculations have been carried out on the electronic and molecular structures of (C{sub 5}H{sub 5})M(L) (L = CO, PH{sub 3}; M = Rh, Ir) (a) and M(CO){sub 4} (M = Ru, Os) (b). All systems are found to have a singlet ground state. Optimized geometries are reported for each system on the singlet ground state as well as the first excited triplet state. Calculated dissociation energies are presented for Y = CO, PH{sub 3}, and H{sub 2} in the case of X{sub n}M = a and for Y = CO and H{sub 2} in the case of X{sub n}M = b. Complete reaction profiles have been calculated for the oxidative addition of H{sub 2} and CH{sub 4} to a and b. The addition reactions are found to be more facile for a than for b. It is argued that a is unique as a C-H activating agent in having only empty {sigma}-type d-based orbitals interacting with the incoming C-H bond. Calculations are presented on the reaction enthalpies of the H-H and C-H addition processes along with the M-H and M-CH{sub 3} bond energies.

  14. Free-Radical Triggered Ordered Domino Reaction: An Approach to C-C Bond Formation via Selective Functionalization of α-Hydroxyl-(sp(3))C-H in Fluorinated Alcohols.

    PubMed

    Xu, Zhengbao; Hang, Zhaojia; Liu, Zhong-Quan

    2016-09-16

    A free-radical mediated highly ordered radical addition/cyclization/(sp(3))C-C(sp(3)) formation domino reaction is developed. Three new C-C bonds are formed one by one in a mixed system. Furthermore, it represents the first example of cascade C-C bond formation via selective functionalization of α-hydroxyl-C(sp(3))-H in fluorinated alcohols.

  15. Reactions of C{sub 2}(a {sup 3} product {sub u}) with selected saturated alkanes: A temperature dependence study

    SciTech Connect

    Hu Renzhi; Zhang Qun; Chen Yang

    2010-04-28

    We present a temperature dependence study on the gas phase reactions of the C{sub 2}(a {sup 3} product {sub u}) radical with a selected series of saturated alkanes (C{sub 2}H{sub 6}, C{sub 3}H{sub 8}, n-C{sub 4}H{sub 10}, i-C{sub 4}H{sub 10}, and n-C{sub 6}H{sub 14}) by means of pulsed laser photolysis/laser-induced fluorescence technique. The bimolecular rate constants for these reactions were obtained between 298 and 673 K. A pronounced negative temperature effect was observed for n-C{sub 4}H{sub 10}, i-C{sub 4}H{sub 10}, and n-C{sub 6}H{sub 14} and interpreted in terms of steric hindrance of the more reactive secondary or tertiary C-H bonds by less reactive CH{sub 3} groups. Detailed analysis of our experimental results reveals quantitatively the temperature dependence of reactivities for the primary, secondary, and tertiary C-H bonds in these saturated alkanes and further lends support to a mechanism of hydrogen abstraction.

  16. alpha-C:H films for photonic structure fabrication

    NASA Astrophysics Data System (ADS)

    Kopustinskas, Vitoldas; Grigaliunas, Viktoras; Jucius, Dalius; Meskinis, Sarunas; Margelevicius, Mindaugas; Tomasiunas, Rolandas

    2001-03-01

    (alpha) -C:H films were applied to fabricate photonic band gap (PBG) structures in the silicon substrate by SF6N2-based reactive ion etching (RIE). The influence of RIE parameters on (alpha) C:H films structure and etching rate was investigated int his study. It is shown that RIE rate for (alpha) -C:H films changes from 26 nm/min to 38 nm/min with the integrated intensity ratios ID/IG varied from 0.65 to 1.1. It is evident that increase in etching rate is determined by increasing quantity of sp2 bonding in the synthesized (alpha) -C:H films. RIE does not change structure of the (alpha) -C:H masking films. However, non- uniform character of RIE takes place due to the non- homogeneous graphite clusters in (alpha) -C:H masking films. However, non-uniform character of RIE takes place due to the non-homogeneous graphite clusters in (alpha) -C:H masking films. By changing parameters of silicon etching, such as RF power density, pressure and negative bias voltage, anisotropy was varied in wide range and microstructures of different shape were obtained.

  17. DDQ-Promoted Benzylic/Allylic sp(3) C-H Activation for the Stereoselective Intramolecular C-N Bond Formation: Applications to the Total Synthesis of (-)-Codonopsinine, (+)-5-epi-Codonopsinine, (+)-Radicamine B, and (-)-Codonopsinol.

    PubMed

    Lingamurthy, Macha; Jagadeesh, Yerri; Ramakrishna, Katakam; Rao, Batchu Venkateswara

    2016-02-19

    This is the first report on an intramolecular C-N bond formation of an amide-tethered benzylic/allylic system using DDQ under neutral conditions which has been successfully applied to the total synthesis of naturally occurring pyrolidine alkaloids. The key steps for the synthesis of corresponding precursors involve Julia-Kociensky olefination/cross-metathesis and dihydroxylation reactions, and this methodology is also extended to the ω-unsaturated N-sulfanilamide to furnish piperidines. PMID:26771920

  18. Enzyme catalysis: C-H activation is a Reiske business

    NASA Astrophysics Data System (ADS)

    Bruner, Steven D.

    2011-05-01

    Enzymes that selectively oxidize unactivated C-H bonds are capable of constructing complex molecules with high efficiency. A new member of this enzyme family is RedG, a Reiske-type oxygenase that catalyses chemically challenging cyclizations in the biosynthesis of prodiginine natural products.

  19. Iron Mineral Catalyzed C-H Activation As a Potential Pathway for Halogenation Processes

    NASA Astrophysics Data System (ADS)

    Tubbesing, C.; Schoeler, H. F.; Benzing, K.; Krause, T.; Lippe, S.; Rudloff, M.

    2014-12-01

    Due to increasing drinking water demand of mankind and an expected climate change the impact of salt lakes and salt deserts will increase within the next decades. Furthermore, a rising sea level influences coastal areas like salt marshes and abets processes which will lead to elevated organohalogen formation. An additional increase of the global warming potential, of particle formation and stratospheric ozone depletion is expected. Understanding these multifaceted processes is essential for mankind to be prepared for these alterations of the atmosphere. For example, Keppler et al. (2000) described the production of volatile halogenated organic compounds via oxidation of organic matter driven by ferric iron. However, the formation of long-chained alkyl halides in salt lakes is yet undisclosed. Despite the relative "inertness" of alkanes a direct halogenation of these compounds might be envisaged. In 2005 Vaillancourt et al. discovered a nonheme iron enzyme which is able to halogenate organic compounds via generating the high valent ferryl cation as reaction center. Based on various publications about C-H activation (Bergman, 2007) we postulate a halogenation process in which an iron containing minerals catalyse the C-H bond cleavage of organic compounds in soils. The generated organic radicals are highly reactive towards halides connected to the iron complex. We suggest that next to diagenetically altered iron containing enzymes, minerals such as oxides, hydroxides and sulfides are involved in abiotic halogenation processes. We applied the amino acid methionine as organic model compound and soluble iron species as reactants. All samples were incubated in aqueous phases containing various NaCl concentrations. As a result various halogenated ethanes and ethenes were identified as reaction products. References Bergman, R. G. (2007) Nature, 446(7134) 391-393 Keppler, F., et al. (2000) Nature, 403(6767) 298-301 Vaillancourt, F. H., et al. (2005) Nature, 436(7054) 1191-1194

  20. Dicobalt-μ-oxo polyoxometalate compound, [(α(2)-P2W17O61Co)2O](14-): a potent species for water oxidation, C-H bond activation, and oxygen transfer.

    PubMed

    Barats-Damatov, Delina; Shimon, Linda J W; Weiner, Lev; Schreiber, Roy E; Jiménez-Lozano, Pablo; Poblet, Josep M; de Graaf, Coen; Neumann, Ronny

    2014-02-01

    High-valent oxo compounds of transition metals are often implicated as active species in oxygenation of hydrocarbons through carbon-hydrogen bond activation or oxygen transfer and also in water oxidation. Recently, several examples of cobalt-catalyzed water oxidation have been reported, and cobalt(IV) species have been suggested as active intermediates. A reactive species, formally a dicobalt(IV)-μ-oxo polyoxometalate compound [(α2-P2W17O61Co)2O](14-), [(POMCo)2O], has now been isolated and characterized by the oxidation of a monomeric [α2-P2W17O61Co(II)(H2O)](8-), [POMCo(II)H2O], with ozone in water. The crystal structure shows a nearly linear Co-O-Co moiety with a Co-O bond length of ∼1.77 Å. In aqueous solution [(POMCo)2O] was identified by (31)P NMR, Raman, and UV-vis spectroscopy. Reactivity studies showed that [(POMCo)2O]2O] is an active compound for the oxidation of H2O to O2, direct oxygen transfer to water-soluble sulfoxides and phosphines, indirect epoxidation of alkenes via a Mn porphyrin, and the selective oxidation of alcohols by carbon-hydrogen bond activation. The latter appears to occur via a hydrogen atom transfer mechanism. Density functional and CASSCF calculations strongly indicate that the electronic structure of [(POMCo)2O]2O] is best defined as a compound having two cobalt(III) atoms with two oxidized oxygen atoms.

  1. Differential steric effects in Cl reactions with aligned CHD3(v1 = 1) by the R(0) and Q(1) transitions. I. Attacking the excited C-H bond

    NASA Astrophysics Data System (ADS)

    Wang, Fengyan; Liu, Kopin

    2016-10-01

    When a CHD3 molecule is pumped to the C-H stretching-excited state by absorbing a linearly polarized infrared (IR) photon via the R(0) branch of the v1 = 1←0 transition, the rotational angular momentum j of the prepared state |" separators=" jK > = |" separators=" 10 > preferentially lies in a plane perpendicular to the IR polarization axis ɛIR. By way of contrast, when the Q(1) branch is used, the state of |" separators=" jK > = |" separators=" 1 ± 1 > is prepared with j aligned along the direction of ɛIR. Reported here is a detailed study of the title reaction by actively controlling the collision geometries under these two IR-excitation schemes at collision energy Ec = 8.6 kcal mol-1, using a crossed molecular beam, product imaging approach. We found that under the R(0) excitation, the polarization-dependent differential cross sections for the HCl(v = 0) + CD3(00) channel can largely be understood by invoking dual reaction mechanisms. The forward-scattered products are most likely mediated by a time-delayed resonance mechanism—as the formation of the HCl(v = 1) + CD3(00) channel, whereas the backward/sideways scattered products are governed by a direct abstraction mechanism. Compared to the previous results at lower Ec of 3.8 kcal mol-1, the sighting of opening-up the attack angle at the transition state of the direct pathway is proposed. Results under the Q(1) excitation are, however, perplexing and bear no obvious correlation to the corresponding ones for the R(0) excitation, defying simple intuitive interpretation. Possible reasons are put forward, which call for theoretical investigations for deeper insights. The results on the alternative isotope channel, DCl + CHD2, will be reported in the following paper.

  2. Reflectance spectroscopy of organic compounds: 1. Alkanes

    USGS Publications Warehouse

    Clark, R.N.; Curchin, J.M.; Hoefen, T.M.; Swayze, G.A.

    2009-01-01

    Reflectance spectra of the organic compounds comprising the alkane series are presented from the ultraviolet to midinfrared, 0.35 to 15.5 /??m. Alkanes are hydrocarbon molecules containing only single carbon-carbon bonds, and are found naturally on the Earth and in the atmospheres of the giant planets and Saturn's moon, Titan. This paper presents the spectral properties of the alkanes as the first in a series of papers to build a spectral database of organic compounds for use in remote sensing studies. Applications range from mapping the environment on the Earth, to the search for organic molecules and life in the solar system and throughout the. universe. We show that the spectral reflectance properties of organic compounds are rich, with major diagnostic spectral features throughout the spectral range studied. Little to no spectral change was observed as a function of temperature and only small shifts and changes in the width of absorption bands were observed between liquids and solids, making remote detection of spectral properties throughout the solar system simpler. Some high molecular weight organic compounds contain single-bonded carbon chains and have spectra similar to alkanes even ' when they fall into other families. Small spectral differences are often present allowing discrimination among some compounds, further illustrating the need to catalog spectral properties for accurate remote sensing identification with spectroscopy.

  3. C-H oxidation by H2O2 and O2 catalyzed by a non-heme iron complex with a sterically encumbered tetradentate N-donor ligand.

    PubMed

    Zhang, Qiao; Gorden, John D; Goldsmith, Christian R

    2013-12-01

    The compound N,N'-dineopentyl-N,N'-bis(2-pyridylmethyl)-1,2-ethanediamine (dnbpn) and its ferrous complex [Fe(dnbpn)(OTf)2] were synthesized. The Fe(II) complex was used to catalyze the oxidation of hydrocarbons by H2O2 and O2. Although the catalyzed alkane oxidation by H2O2 displays a higher preference for secondary over tertiary carbons than those associated with most previously reported nonheme iron catalysts, the catalytic activity is markedly inferior. In addition to directing the catalyzed oxidation toward the less sterically congested C-H bonds of the substrates, the neopentyl groups destabilize the metal-based oxidants generated from H2O2 and the Fe(II) complex. The presence of benzylic substrates with weak C-H bonds stabilizes an intermediate which we have tentatively assigned as a high-spin ferric hydroperoxide species. The oxidant generated from O2 reacts with allylic and benzylic C-H bonds in the absence of a sacrificial reductant; less substrate dehydrogenation is observed than with related previously described systems that use O2 as a terminal oxidant. PMID:24252099

  4. Ultrafast studies of organometallic photochemistry: The mechanism of carbon-hydrogen bond activation in solution

    SciTech Connect

    Bromberg, S.E.

    1998-05-01

    When certain organometallic compounds are photoexcited in room temperature alkane solution, they are able to break or activate the C-H bonds of the solvent. Understanding this potentially practical reaction requires a detailed knowledge of the entire reaction mechanism. Because of the dynamic nature of chemical reactions, time-resolved spectroscopy is commonly employed to follow the important events that take place as reactants are converted to products. For the organometallic reactions examined here, the electronic/structural characteristics of the chemical systems along with the time scales for the key steps in the reaction make ultrafast UV/Vis and IR spectroscopy along with nanosecond Step-Scan FTIR spectroscopy the ideal techniques to use for this study. An initial study of the photophysics of (non-activating) model metal carbonyls centering on the photodissociation of M(CO){sub 6} (M = Cr, W, Mo) was carried out in alkane solutions using ultrafast IR spectroscopy. Next, picosecond UV/vis studies of the C-H bond activation reaction of Cp{sup *}M(CO){sub 2} (M = Rh, Ir), conducted in room temperature alkane solution, are described in an effort to investigate the origin of the low quantum yield for bond cleavage ({approximately}1%). To monitor the chemistry that takes place in the reaction after CO is lost, a system with higher quantum yield is required. The reaction of Tp{sup *}Rh(CO){sub 2} (Tp{sup *} = HB-Pz{sub 3}{sup *}, Pz{sup *} = 3,5-dimethylpyrazolyl) in alkanes has a quantum yield of {approximately}30%, making time resolved spectroscopic measurements possible. From ultrafast IR experiments, two subsequently formed intermediates were observed. The nature of these intermediates are discussed and the first comprehensive reaction mechanism for a photochemical C-H activating organometallic complex is presented.

  5. Electronic effect in C-H and C-C bond activation: state-specific reactions of Fe/sup +/(/sup 6/D, /sup 4/F) with methane, ethane, and propane

    SciTech Connect

    Schultz, R.H.; Elkind, J.L.; Armentrout, P.B.

    1988-01-20

    Reactions of atomic iron ions with methane, ethane, and propane are studied with guided ion beam mass spectrometry. By using different ion sources different electronic states of the ion can be prepared and studied in detail. The first excited state, Fe/sup +/(/sup 4/F), is more reactive than the ground state, Fe/sup +/(/sup 6/D), for all endothermic reactions in all three systems. This result is similar to recent observations of the reactions of these states with H/sub 2/. The different reactivities are explained by using simple molecular orbital arguments. In contrast, Fe/sup +/(/sup 4/F) reacts less efficiently than Fe/sup +/(/sup 6/D) in the exothermic reactions of ethane and propane below 0.5 eV but more efficiently at higher energies. This behavior is explained by a potential energy surface crossing that is avoided at low kinetic energies due to spin-orbit interactions and is permitted at higher energies. Finally, analysis of the threshold behavior of the endothermic reactions provides the bond dissociation energies, D/sup 0/(Fe/sup +/-CH/sub 3/) = 2.51 +/- 0.10 eV (57.9 +/- 2.4 kcal/mol) and D/sup 0/(FeH) = 1.98 +/- 0.13 eV (45.7 +/- 3.0 kcal/mol).

  6. Binding of hydrocarbons and other extremely weak ligands to transition metal complexes that coordinate hydrogen: Investigation of cis-interactions and delocalized bonding involving sigma bonds

    SciTech Connect

    Kubas, G.J.; Eckert, J.; Luo, X.L.

    1997-07-01

    This is the final report of a three-year Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). At the forefront of chemistry are efforts to catalytically transform the inert C-H bonds in alkanes to more useful products using metal compounds. The goal is to observe binding and cleavage of alkane C-H bonds on metals or to use related silane Si-H bonding as models, analogous to the discovery of hydrogen (H{sub 2}) binding to metals. Studies of these unique sigma complexes (M{hor_ellipsis}H-Y; Y{double_bond}H, Si, C) will aid in developing new catalysts or technologies relevant to DOE interest, e.g., new methods for tritium isotope separation. Several transition metals (Mo, W, Mn, and Pt) were found to reversibly bind and cleave H{sub 2}, silanes, and halocarbons. The first metal-SiH{sub 4} complexes, thus serving as a model for methane reactions. A second goal is to study the dynamics and energetics of H-Y bonds on metals by neutron scattering, and evidence for interactions between bound H-Y and nearby H atoms on metal complexes has been found.

  7. Detailed structural characterization of the grafting of [Ta(=CHtBu)(CH2tBu)3] and [Cp*TaMe4] on silica partially dehydroxylated at 700 C and the activity of the grafted complexes toward alkane metathesis

    SciTech Connect

    Le Roux, Erwan; Chabanas, Mathieu; Baudouin, Anne; de Mallmann, Aimery; Coperet, Christophe; Quadrelli, E. Allesandra; Thivolle-Cazat, Jean; Basset, Jean-Marie; Lukens, Wayne; Lesage, Anne; Emsley, Lyndon; Sunley, Glenn J.

    2004-08-30

    The reaction of [Ta({double_bond}CHtBu)(CH{sub 2}tBu){sub 3}] or [Cp*Ta(CH{sub 3}){sub 4}] with a silica partially dehydroxylated at 700 C gives the corresponding monosiloxy surface complexes [({triple_bond}SiO)Ta({double_bond}CHtBu)(CH{sub 2}tBu){sub 2}] and [({triple_bond}SiO)Ta(CH{sub 3}){sub 3}Cp*] by eliminating a {sigma}-bonded ligand as the corresponding alkane (H-CH{sub 2}tBu or H-CH{sub 3}). EXAFS data show that an adjacent siloxane bridge of the surface plays the role of an extra surface ligand, which most likely stabilizes these complexes as in [({triple_bond}SiO)Ta({double_bond}CHtBu)(CH{sub 2}tBu){sub 2}({triple_bond}SiOSi{triple_bond})] (1a') and [({triple_bond}SiO)Ta(CH{sub 3}){sub 3}Cp*({triple_bond}SiOSi{triple_bond})] (2a'). In the case of [({triple_bond}SiO)Ta({double_bond}CHtBu)(CH{sub 2}tBu){sub 2}({triple_bond}SiOSi{triple_bond})], the structure is further stabilized by an additional interaction: a C-H agostic bond as evidenced by the small J coupling constant for the carbenic C-H (H{sub C-H} = 80 Hz), which was measured by J-resolved 2D solid-state NMR spectroscopy. The product selectivity in propane metathesis in the presence of [({triple_bond}SiO)Ta({double_bond}CHtBu)-(CH{sub 2}tBu){sub 2}({triple_bond}SiOSi{triple_bond})] (1a') as a catalyst precursor and the inactivity of the surface complex [({triple_bond}SiO)Ta-(CH{sub 3}){sub 3}Cp*({triple_bond}SiOSi{triple_bond})] (2a') show that the active site is required to be highly electrophilic and probably involves a metallacyclobutane intermediate.

  8. Scalable and sustainable electrochemical allylic C-H oxidation.

    PubMed

    Horn, Evan J; Rosen, Brandon R; Chen, Yong; Tang, Jiaze; Chen, Ke; Eastgate, Martin D; Baran, Phil S

    2016-05-01

    New methods and strategies for the direct functionalization of C-H bonds are beginning to reshape the field of retrosynthetic analysis, affecting the synthesis of natural products, medicines and materials. The oxidation of allylic systems has played a prominent role in this context as possibly the most widely applied C-H functionalization, owing to the utility of enones and allylic alcohols as versatile intermediates, and their prevalence in natural and unnatural materials. Allylic oxidations have featured in hundreds of syntheses, including some natural product syntheses regarded as "classics". Despite many attempts to improve the efficiency and practicality of this transformation, the majority of conditions still use highly toxic reagents (based around toxic elements such as chromium or selenium) or expensive catalysts (such as palladium or rhodium). These requirements are problematic in industrial settings; currently, no scalable and sustainable solution to allylic oxidation exists. This oxidation strategy is therefore rarely used for large-scale synthetic applications, limiting the adoption of this retrosynthetic strategy by industrial scientists. Here we describe an electrochemical C-H oxidation strategy that exhibits broad substrate scope, operational simplicity and high chemoselectivity. It uses inexpensive and readily available materials, and represents a scalable allylic C-H oxidation (demonstrated on 100 grams), enabling the adoption of this C-H oxidation strategy in large-scale industrial settings without substantial environmental impact.

  9. Scalable and sustainable electrochemical allylic C-H oxidation.

    PubMed

    Horn, Evan J; Rosen, Brandon R; Chen, Yong; Tang, Jiaze; Chen, Ke; Eastgate, Martin D; Baran, Phil S

    2016-05-01

    New methods and strategies for the direct functionalization of C-H bonds are beginning to reshape the field of retrosynthetic analysis, affecting the synthesis of natural products, medicines and materials. The oxidation of allylic systems has played a prominent role in this context as possibly the most widely applied C-H functionalization, owing to the utility of enones and allylic alcohols as versatile intermediates, and their prevalence in natural and unnatural materials. Allylic oxidations have featured in hundreds of syntheses, including some natural product syntheses regarded as "classics". Despite many attempts to improve the efficiency and practicality of this transformation, the majority of conditions still use highly toxic reagents (based around toxic elements such as chromium or selenium) or expensive catalysts (such as palladium or rhodium). These requirements are problematic in industrial settings; currently, no scalable and sustainable solution to allylic oxidation exists. This oxidation strategy is therefore rarely used for large-scale synthetic applications, limiting the adoption of this retrosynthetic strategy by industrial scientists. Here we describe an electrochemical C-H oxidation strategy that exhibits broad substrate scope, operational simplicity and high chemoselectivity. It uses inexpensive and readily available materials, and represents a scalable allylic C-H oxidation (demonstrated on 100 grams), enabling the adoption of this C-H oxidation strategy in large-scale industrial settings without substantial environmental impact. PMID:27096371

  10. Scalable and sustainable electrochemical allylic C-H oxidation

    NASA Astrophysics Data System (ADS)

    Horn, Evan J.; Rosen, Brandon R.; Chen, Yong; Tang, Jiaze; Chen, Ke; Eastgate, Martin D.; Baran, Phil S.

    2016-05-01

    New methods and strategies for the direct functionalization of C-H bonds are beginning to reshape the field of retrosynthetic analysis, affecting the synthesis of natural products, medicines and materials. The oxidation of allylic systems has played a prominent role in this context as possibly the most widely applied C-H functionalization, owing to the utility of enones and allylic alcohols as versatile intermediates, and their prevalence in natural and unnatural materials. Allylic oxidations have featured in hundreds of syntheses, including some natural product syntheses regarded as “classics”. Despite many attempts to improve the efficiency and practicality of this transformation, the majority of conditions still use highly toxic reagents (based around toxic elements such as chromium or selenium) or expensive catalysts (such as palladium or rhodium). These requirements are problematic in industrial settings; currently, no scalable and sustainable solution to allylic oxidation exists. This oxidation strategy is therefore rarely used for large-scale synthetic applications, limiting the adoption of this retrosynthetic strategy by industrial scientists. Here we describe an electrochemical C-H oxidation strategy that exhibits broad substrate scope, operational simplicity and high chemoselectivity. It uses inexpensive and readily available materials, and represents a scalable allylic C-H oxidation (demonstrated on 100 grams), enabling the adoption of this C-H oxidation strategy in large-scale industrial settings without substantial environmental impact.

  11. A General Strategy for the Nickel-Catalyzed C-H Alkylation of Anilines.

    PubMed

    Ruan, Zhixiong; Lackner, Sebastian; Ackermann, Lutz

    2016-02-24

    The C-H alkylation of aniline derivatives with both primary and secondary alkyl halides was achieved with a versatile nickel catalyst of a vicinal diamine ligand. Step-economic access to functionalized 2-pyrimidyl anilines, key structural motifs in anticancer drugs, is thus provided. The C-H functionalization proceeded through facile C-H activation and SET-type C-X bond cleavage with the assistance of a monodentate directing group, which could be removed in a traceless fashion.

  12. To rebound or dissociate? This is the mechanistic question in C-H hydroxylation by heme and nonheme metal-oxo complexes.

    PubMed

    Cho, Kyung-Bin; Hirao, Hajime; Shaik, Sason; Nam, Wonwoo

    2016-03-01

    Enzymatic reactions that involve C-H bond activation of alkanes by high-valent iron-oxo species can be explained by the rebound mechanism (RM). Hydroxylation reactions of alkane substrates effected by the reactive compound I (Cpd I) species of cytochrome P450 enzymes are good examples. There was initially little doubt that the rebound paradigm could be carried over in the same form to the arena of synthetic nonheme high-valent iron-oxo or other metal-oxo complexes. However, the active reaction centres of these synthetic systems are not well-caged, in contrast to the active sites of enzymes; therefore, the relative importance of the radical dissociation pathway can become prominent. Indeed, accumulating experimental and theoretical evidence shows that introduction of the non-rebound mechanism (non-RM) is necessary to rationalise the different reactivity patterns observed for synthetic nonheme complexes. In this tutorial review, we discuss several specific examples involving the non-RM while making frequent comparisons to the RM, mainly from the perspective of computational chemistry. We also provide a technical guide to DFT calculations of RM and non-RM and to the interpretations of computational outcomes. PMID:26690848

  13. To rebound or dissociate? This is the mechanistic question in C-H hydroxylation by heme and nonheme metal-oxo complexes.

    PubMed

    Cho, Kyung-Bin; Hirao, Hajime; Shaik, Sason; Nam, Wonwoo

    2016-03-01

    Enzymatic reactions that involve C-H bond activation of alkanes by high-valent iron-oxo species can be explained by the rebound mechanism (RM). Hydroxylation reactions of alkane substrates effected by the reactive compound I (Cpd I) species of cytochrome P450 enzymes are good examples. There was initially little doubt that the rebound paradigm could be carried over in the same form to the arena of synthetic nonheme high-valent iron-oxo or other metal-oxo complexes. However, the active reaction centres of these synthetic systems are not well-caged, in contrast to the active sites of enzymes; therefore, the relative importance of the radical dissociation pathway can become prominent. Indeed, accumulating experimental and theoretical evidence shows that introduction of the non-rebound mechanism (non-RM) is necessary to rationalise the different reactivity patterns observed for synthetic nonheme complexes. In this tutorial review, we discuss several specific examples involving the non-RM while making frequent comparisons to the RM, mainly from the perspective of computational chemistry. We also provide a technical guide to DFT calculations of RM and non-RM and to the interpretations of computational outcomes.

  14. FINAL TECHNICAL REPORT for grant DE-FG02-93ER14353 "Carbon-Hydrogen Bond Functionalization Catalyzed by Transition Metal Systems"

    SciTech Connect

    Goldman, Alan S

    2012-05-21

    Alkanes are our most abundant organic resource but are highly resistant to selective chemical transformations. Alkenes (olefins) by contrast are the single most versatile class of molecules for selective transformations, and are intermediates in virtually every petrochemical process as well as a vast range of commodity and fine chemical processes. Over the course of this project we have developed the most efficient catalysts to date for the selective conversion of alkanes to give olefins, and have applied these catalysts to other dehydrogenation reactions. We have also developed some of the first efficient catalysts for carbonylation of alkanes and arenes to give aldehydes. The development of these catalysts has been accompanied by elucidation of the mechanism of their operation and the factors controlling the kinetics and thermodynamics of C-H bond activation and other individual steps of the catalytic cycles. This fundamental understanding will allow the further improvement of these catalysts, as well as the development of the next generation of catalysts for the functionalization of alkanes and other molecules containing C-H bonds.

  15. The palladium-catalyzed intermolecular C-H chalcogenation of arenes.

    PubMed

    Qiu, Renhua; Reddy, Vutukuri Prakash; Iwasaki, Takanori; Kambe, Nobuaki

    2015-01-01

    Palladium catalyzes the intermolecular chalcogenation of carbazole, 2-phenylpyridine, benzo[h]quinolone, and indole derivatives with disulfides and diselenides via selective C-H bond cleavage, providing a convenient route to thio and selenoethers. PMID:25437148

  16. Kinetic and Mechanistic Assessment of Alkanol/Alkanal Decarbonylation and Deoxygenation Pathways on Metal Catalysts.

    PubMed

    Gürbüz, Elif I; Hibbitts, David D; Iglesia, Enrique

    2015-09-23

    This study combines theory and experiment to determine the kinetically relevant steps and site requirements for deoxygenation of alkanols and alkanals. These reactants deoxygenate predominantly via decarbonylation (C-C cleavage) instead of C-O hydrogenolysis on Ir, Pt, and Ru, leading to strong inhibition effects by chemisorbed CO (CO*). C-C cleavage occurs via unsaturated species formed in sequential quasi-equilibrated dehydrogenation steps, which replace C-H with C-metal bonds, resulting in strong inhibition by H2, also observed in alkane hydrogenolysis. C-C cleavage occurs in oxygenates only at locations vicinal to the C═O group in RCCO* intermediates, because such adjacency weakens C-C bonds, which also leads to much lower activation enthalpies for oxygenates than hydrocarbons. C-O hydrogenolysis rates are independent of H2 pressure and limited by H*-assisted C-O cleavage in RCHOH* intermediates on surfaces with significant coverages of CO* formed in decarbonylation events. The ratio of C-O hydrogenolysis to decarbonylation rates increased almost 100-fold as the Ir cluster size increased from 0.7 to 7 nm; these trends reflect C-O hydrogenolysis reactions favored on terrace sites, while C-C hydrogenolysis prefers sites with lower coordination, because of the relative size of their transition states and the crowded nature of CO*-covered surfaces. C-O hydrogenolysis becomes the preferred deoxygenation route on Cu-based catalysts, thus avoiding CO inhibition effects. The relative rates of C-O and C-C cleavage on these metals depend on their relative ability to bind C atoms, because C-C cleavage transitions states require an additional M-C attachment. PMID:26356575

  17. Kinetic and Mechanistic Assessment of Alkanol/Alkanal Decarbonylation and Deoxygenation Pathways on Metal Catalysts.

    PubMed

    Gürbüz, Elif I; Hibbitts, David D; Iglesia, Enrique

    2015-09-23

    This study combines theory and experiment to determine the kinetically relevant steps and site requirements for deoxygenation of alkanols and alkanals. These reactants deoxygenate predominantly via decarbonylation (C-C cleavage) instead of C-O hydrogenolysis on Ir, Pt, and Ru, leading to strong inhibition effects by chemisorbed CO (CO*). C-C cleavage occurs via unsaturated species formed in sequential quasi-equilibrated dehydrogenation steps, which replace C-H with C-metal bonds, resulting in strong inhibition by H2, also observed in alkane hydrogenolysis. C-C cleavage occurs in oxygenates only at locations vicinal to the C═O group in RCCO* intermediates, because such adjacency weakens C-C bonds, which also leads to much lower activation enthalpies for oxygenates than hydrocarbons. C-O hydrogenolysis rates are independent of H2 pressure and limited by H*-assisted C-O cleavage in RCHOH* intermediates on surfaces with significant coverages of CO* formed in decarbonylation events. The ratio of C-O hydrogenolysis to decarbonylation rates increased almost 100-fold as the Ir cluster size increased from 0.7 to 7 nm; these trends reflect C-O hydrogenolysis reactions favored on terrace sites, while C-C hydrogenolysis prefers sites with lower coordination, because of the relative size of their transition states and the crowded nature of CO*-covered surfaces. C-O hydrogenolysis becomes the preferred deoxygenation route on Cu-based catalysts, thus avoiding CO inhibition effects. The relative rates of C-O and C-C cleavage on these metals depend on their relative ability to bind C atoms, because C-C cleavage transitions states require an additional M-C attachment.

  18. Four-Electron Donor Hemilabile n3-PPh3 Ligand that Binds Through a C = C Bond Rather than an Agostic C-H Interaction, and Displacement of the C = C by Methyl Iodide or Water

    SciTech Connect

    Cheng, Tan-Yun; Szalda, David J.; Hanson, Jonathan C.; Muckerman, J. T.; Bullock, R. Morris

    2008-07-12

    Hydride transfer from Cp(CO)2(PPh3)MoH to Ph3C+ BAr'4 [Ar' = 3,5-bis(trifluoromethyl)phenyl] produces [Cp(CO)23 PPh3)Mo]+[BAr'4] . Spectroscopic and crystallographic data indicate that one C=C of a Ph ring is weakly bound to the Mo, so that the PPh3 ligand is four-electron donor ligand. Computations (DFT/B3LYP and MP2 on [Cp(CO)23 PPh3)Mo]+ and [Cp(CO)23 PH2Ph)Mo]+, and DFT/B3LYP on [Cp(CO)23 PHtBuPh)Mo]+ and [Cp(CO)23 PH2Ph)Nb]) provide further information on the bonding, and on the preference for bonding of the metal to the C=C bond rather than an agostic C H interaction found in many related complexes. The hemilabile C=C bond is readily displaced by CH3I or H2O, and crystal structures are reported for [Cp(CO)2(PPh3)Mo(ICH3)]+ and [Cp(CO)2(PPh3)Mo(OH2)]+. The equilibrium constant for [Cp(CO)23 PPh3)Mo]+ + ICH3 to give [Cp(CO)2(PPh3)Mo(ICH3)]+ is Keq = 5.2 x 102 M -1 in CD2Cl2 at 22 °C.

  19. C-H Coupling Reactions Directed by Sulfoxides: Teaching an Old Functional Group New Tricks.

    PubMed

    Pulis, Alexander P; Procter, David J

    2016-08-16

    Sulfoxides are classical functional groups for directing the stoichiometric metalation and functionalization of C-H bonds. In recent times, sulfoxides have been given a new lease on life owing to the development of modern synthetic methods that have arisen because of their unique reactivity. They have recently been used in catalytic C-H activation proceeding via coordination of an internal sulfoxide to a metal or through the action of an external sulfoxide ligand. Furthermore, sulfoxides are able to capture nucleophiles and electrophiles to give sulfonium salts, which subsequently enable the formation of C-C bonds at the expense of C-H bonds. This Review summarizes a renaissance period in the application of sulfoxides arising from their versatility in directing C-H functionalization. PMID:27409984

  20. Catalytic production of branched small alkanes from biohydrocarbons.

    PubMed

    Oya, Shin-ichi; Kanno, Daisuke; Watanabe, Hideo; Tamura, Masazumi; Nakagawa, Yoshinao; Tomishige, Keiichi

    2015-08-10

    Squalane, C30 algae-derived branched hydrocarbon, was successfully converted to smaller hydrocarbons without skeletal isomerization and aromatization over ruthenium on ceria (Ru/CeO2 ). The internal CH2 CH2 bonds located between branches are preferably dissociated to give branched alkanes with very simple distribution as compared with conventional methods using metal-acid bifunctional catalysts.

  1. Highly dispersed buckybowls as model carbocatalysts for C–H bond activation

    SciTech Connect

    Soykal, I. Ilgaz; Wang, Hui; Park, Jewook; Li, An-Ping; Liang, Chengdu; Schwartz, Viviane

    2015-03-19

    Buckybowl fractions dispersed on mesoporous silica constitute an ideal model for studying the catalysis of graphitic forms of carbon since the dispersed carbon nanostructures contain a high ratio of edge defects and curvature induced by non-six-membered rings. Dispersion of the active centers on an easily accessible high surface area material allowed for high density of surface active sites associated with oxygenated structures. This report illustrates a facile method of creating model polycyclic aromatic nano-structures that are not only active for alkane C-H bond activation and oxidative dehydrogenation but also can be practical catalysts to be eventually used in industry.

  2. Adsorption and dissociation kinetics of alkanes on CaO(100)

    NASA Astrophysics Data System (ADS)

    Chakradhar, A.; Liu, Y.; Schmidt, J.; Kadossov, E.; Burghaus, U.

    2011-08-01

    The adsorption kinetics of ethane, butane, pentane, and hexane on CaO(100) have been studied by multi-mass thermal desorption (TDS) spectroscopy. The sample cleanliness was checked by Auger electron spectroscopy. A molecular and dissociative adsorption pathway was evident for the alkanes, except for ethane, which does not undergo bond activation. Two TDS peaks appeared when recording the parent mass, which are assigned to different adsorption sites/configurations of the molecularly adsorbed alkanes. Bond activation leads to desorption of hydrogen and several alkane fragments assigned to methane and ethylene formation. Only one TDS feature is seen in this case. Formation of carbon residuals was absent.

  3. Ion implantation induced modification of a-SiC : H

    NASA Astrophysics Data System (ADS)

    Tzenov, N.; Tzolov, M.; Dimova-Malinovska, D.; Tsvetkova, T.; Angelov, C.; Adriaenssens, G.; Pattyn, H.

    1994-02-01

    Optical transmission measurements have been carried out on thin a-SiC:H alloy films, implanted with ions of group IV elements. High doses of the order of 10 17 cm -2 have been used leading to a considerable shift of the absorption edge to lower photon energies. This shift may be attributed both to additional defect introduction and to accompanying formation of bonds between implanted ions and the atoms of the alloy, as confirmed by IR and Raman measurements. The observed chemical modification results from the high concentration of introduced atoms which is of the order of those for the host elements.

  4. Copper-catalyzed oxidative dehydrogenative carboxylation of unactivated alkanes to allylic esters via alkenes.

    PubMed

    Tran, Ba L; Driess, Matthias; Hartwig, John F

    2014-12-10

    We report copper-catalyzed oxidative dehydrogenative carboxylation (ODC) of unactivated alkanes with various substituted benzoic acids to produce the corresponding allylic esters. Spectroscopic studies (EPR, UV-vis) revealed that the resting state of the catalyst is [(BPI)Cu(O2CPh)] (1-O2CPh), formed from [(BPI)Cu(PPh3)2], oxidant, and benzoic acid. Catalytic and stoichiometric reactions of 1-O2CPh with alkyl radicals and radical probes imply that C-H bond cleavage occurs by a tert-butoxy radical. In addition, the deuterium kinetic isotope effect from reactions of cyclohexane and d12-cyclohexane in separate vessels showed that the turnover-limiting step for the ODC of cyclohexane is C-H bond cleavage. To understand the origin of the difference in products formed from copper-catalyzed amidation and copper-catalyzed ODC, reactions of an alkyl radical with a series of copper-carboxylate, copper-amidate, and copper-imidate complexes were performed. The results of competition experiments revealed that the relative rate of reaction of alkyl radicals with the copper complexes follows the trend Cu(II)-amidate > Cu(II)-imidate > Cu(II)-benzoate. Consistent with this trend, Cu(II)-amidates and Cu(II)-benzoates containing more electron-rich aryl groups on the benzamidate and benzoate react faster with the alkyl radical than do those with more electron-poor aryl groups on these ligands to produce the corresponding products. These data on the ODC of cyclohexane led to preliminary investigation of copper-catalyzed oxidative dehydrogenative amination of cyclohexane to generate a mixture of N-alkyl and N-allylic products. PMID:25389772

  5. Enhanced Reactivity in Dioxirane C-H Oxidations via Strain Release: A Computational and Experimental Study

    PubMed Central

    Zou, Lufeng; Paton, Robert S.; Eschenmoser, Albert; Newhouse, Timothy R.; Baran, Phil S.; Houk, K. N.

    2013-01-01

    The site- and stereo-selectivities of C-H oxidations of substituted cyclohexanes and trans-decalins by dimethyldioxirane (DMDO) were investigated computationally with quantum mechanical density functional theory (DFT). The multi-configuration CASPT2 method was employed on model systems to establish the preferred mechanism and transition state geometry. The reaction pathway involving a rebound step is established to account for the retention of stereochemistry. The oxidation of sclareolide with dioxirane reagents is reported, including the oxidation by the in situ generated tBu-TFDO, a new dioxirane that better discriminates between C-H bonds based on steric effects. The release of 1,3-diaxial strain in the transition state contributes to the site selectivity and enhanced axial reactivity for tertiary C-H bonds, a result of the lowering of distortion energy. In addition to this strain release factor, steric and inductive effects contribute to the rates of C-H oxidation by dioxiranes. PMID:23461537

  6. Advances in the development of catalytic tethering directing groups for C-H functionalization reactions.

    PubMed

    Sun, Huan; Guimond, Nicolas; Huang, Yong

    2016-09-28

    Transition metal-catalyzed C-H bond insertion is one of the most straightforward strategies to introduce functionalities within a hydrocarbon microenvironment. For the past two decades, selective activation and functionalization of certain inert C-H bonds have been made possible with the help of directing groups (DGs). Despite the enormous advances in the field, an overwhelming majority of systems require two extra steps from their simple precursors: installation and removal of the DGs. Recently, traceless and multitasking groups were invented as a partial solution to DG release. However, installation remains largely unsolved. Ideally, a transient, catalytic DG would circumvent this problem and increase the step- and atom-economy of C-H functionalization processes. In this review, we summarize the recent development of the transient tethering strategy for C-H activation reactions. PMID:27506568

  7. Manganese-catalyzed selective oxidation of aliphatic C-H groups and secondary alcohols to ketones with hydrogen peroxide.

    PubMed

    Dong, Jia Jia; Unjaroen, Duenpen; Mecozzi, Francesco; Harvey, Emma C; Saisaha, Pattama; Pijper, Dirk; de Boer, Johannes W; Alsters, Paul; Feringa, Ben L; Browne, Wesley R

    2013-09-01

    An efficient and simple method for selective oxidation of secondary alcohols and oxidation of alkanes to ketones is reported. An in situ prepared catalyst is employed based on manganese(II) salts, pyridine-2-carboxylic acid, and butanedione, which provides good-to-excellent conversions and yields with high turnover numbers (up to 10 000) with H2 O2 as oxidant at ambient temperatures. In substrates bearing multiple alcohol groups, secondary alcohols are converted to ketones selectively and, in general, benzyl C-H oxidation proceeds in preference to aliphatic C-H oxidation.

  8. Iodine-catalyzed oxidative coupling reactions utilizing C - H and X - H as nucleophiles.

    PubMed

    Liu, Dong; Lei, Aiwen

    2015-04-01

    In recent decades, iodine-catalyzed oxidative coupling reactions utilizing C - H and X - H as nucleophiles have received considerable attention because they represent more efficient, greener, more atom-economical, and milder bond-formation strategies over transition-metal-catalyzed oxidative coupling reactions. This Focus Review gives a brief summary of recent development on iodine-catalyzed oxidative coupling reactions utilizing C - H and X - H as nucleophiles.

  9. In the pursuit of small "red shift" of C-H stretching vibrational frequency of C-H...pi interactions for benzene dimer: How to amend MP2 calculations to reproduce the experimental results.

    PubMed

    Dinadayalane, T C; Leszczynski, Jerzy

    2009-02-28

    For the bent T-shaped benzene dimer, the vibrational frequencies at the MP2/aug-cc-pVDZ level with counterpoise correction reproduce experimental results of the small "red shifts" of C-H stretching, while those without counterpoise correction yield considerable "blue shift." Counterpoise correction also affects the C-H bond distances of C-H...pi interactions as well as intermoiety distances.

  10. Subnanometer-sized Pt/Sn alloy cluster catalysts for the dehydrogenation of linear alkanes.

    PubMed

    Hauser, Andreas W; Gomes, Joseph; Bajdich, Michal; Head-Gordon, Martin; Bell, Alexis T

    2013-12-21

    The reaction pathways for the dehydrogenation of ethane, propane, and butane, over Pt are analyzed using density functional theory (DFT). Pt nanoparticles are represented by a tetrahedral Pt4 cluster. The objectives of this work were to establish which step is rate limiting and which one controls the selectivity for forming alkenes as opposed to causing further dehydrogenation of adsorbed alkenes to produce precursors responsible for catalyst deactivation due to coking. Further objectives of this work are to identify the role of adsorbed hydrogen, derived from H2 fed together with the alkane, on the reaction pathway, and the role of replacing one of the four Pt atoms by a Sn atom. A comparison of Gibbs free energies shows that in all cases the rate-determining step is cleavage of a C-H bond upon alkane adsorption. The selectivity to alkene formation versus precursors to coking is dictated by the relative magnitudes of the activation energies for alkene desorption and dehydrogenation of the adsorbed alkene. The presence of an adsorbed H atom on the cluster facilitates alkene desorption relative to dehydrogenation of the adsorbed alkene. Substitution of a Sn atom in the cluster to produce a Pt3Sn cluster leads to a downward shift of the potential energy surface for the reaction and causes an increase of the activity of the catalyst as suggested by recent experiments due to the lower net activation barrier for the rate limiting step. However, the introduction of Sn does not alter the relative activation barriers for gas-phase alkene formation versus loss of hydrogen from the adsorbed alkene, the process leading to the formation of coke precursors. PMID:24196250

  11. A Simple and Versatile Amide Directing Group for C-H Functionalizations.

    PubMed

    Zhu, Ru-Yi; Farmer, Marcus E; Chen, Yan-Qiao; Yu, Jin-Quan

    2016-08-26

    Achieving selective C-H activation at a single and strategic site in the presence of multiple C-H bonds can provide a powerful and generally useful retrosynthetic disconnection. In this context, a directing group serves as a compass to guide the transition metal to C-H bonds by using distance and geometry as powerful recognition parameters to distinguish between proximal and distal C-H bonds. However, the installation and removal of directing groups is a practical drawback. To improve the utility of this approach, one can seek solutions in three directions: 1) Simplifying the directing group, 2) using common functional groups or protecting groups as directing groups, and 3) attaching the directing group to substrates via a transient covalent bond to render the directing group catalytic. This Review describes the rational development of an extremely simple and yet broadly applicable directing group for Pd(II) , Rh(III) , and Ru(II) catalysts, namely the N-methoxy amide (CONHOMe) moiety. Through collective efforts in the community, a wide range of C-H activation transformations using this type of simple directing group have been developed. PMID:27479708

  12. Iron-Catalyzed Oxyfunctionalization of Aliphatic Amines at Remote Benzylic C-H Sites.

    PubMed

    Mbofana, Curren T; Chong, Eugene; Lawniczak, James; Sanford, Melanie S

    2016-09-01

    We report the development of an iron-catalyzed method for the selective oxyfunctionalization of benzylic C(sp(3))-H bonds in aliphatic amine substrates. This transformation is selective for benzylic C-H bonds that are remote (i.e., at least three carbons) from the amine functional group. High site selectivity is achieved by in situ protonation of the amine with trifluoroacetic acid, which deactivates more traditionally reactive C-H sites that are α to nitrogen. The scope and synthetic utility of this method are demonstrated via the synthesis and derivatization of a variety of amine-containing, biologically active molecules. PMID:27529646

  13. Metal-Free sp(2)-C-H Borylation as a Common Reactivity Pattern of Frustrated 2-Aminophenylboranes.

    PubMed

    Chernichenko, Konstantin; Lindqvist, Markus; Kótai, Bianka; Nieger, Martin; Sorochkina, Kristina; Pápai, Imre; Repo, Timo

    2016-04-13

    C-H borylation is a powerful and atom-efficient method for converting affordable and abundant chemicals into versatile organic reagents used in the production of fine chemicals and functional materials. Herein we report a facile C-H borylation of aromatic and olefinic C-H bonds with 2-aminophenylboranes. Computational and experimental studies reveal that the metal-free C-H insertion proceeds via a frustrated Lewis pair mechanism involving heterolytic splitting of the C-H bond by cooperative action of the amine and boryl groups. The adapted geometry of the reactive B and N centers results in an unprecedentently low kinetic barrier for both insertion into the sp(2)-C-H bond and intramolecular protonation of the sp(2)-C-B bond in 2-ammoniophenyl(aryl)- or -(alkenyl)borates. This common reactivity pattern serves as a platform for various catalytic reactions such as C-H borylation and hydrogenation of alkynes. In particular, we demonstrate that simple 2-aminopyridinium salts efficiently catalyze the C-H borylation of hetarenes with catecholborane. This reaction is presumably mediated by a borenium species isoelectronic to 2-aminophenylboranes.

  14. Cp*Co(III)-Catalyzed Dehydrative C-H Allylation of 6-Arylpurines and Aromatic Amides Using Allyl Alcohols in Fluorinated Alcohols.

    PubMed

    Bunno, Youka; Murakami, Nanami; Suzuki, Yudai; Kanai, Motomu; Yoshino, Tatsuhiko; Matsunaga, Shigeki

    2016-05-01

    Cp*Co(III)-catalyzed C-H allylation of various aromatic C-H bonds using allyl alcohols as allylating reagents is described. Improved reaction conditions using fluorinated alcohol solvents afforded efficient directed C-H allylation of 6-arylpurines, benzamides, and a synthetically useful Weinreb amide with good functional group compatibility.

  15. alpha-Diimine Ligand Coordination and C H Bond Activation in the Reaction of Os3(CO)10(MeCN)2 with 6-R-2,2'-Bipyridine (where R = Et, Ph): X-ray Diffraction Structures of the Ortho-Metalated

    SciTech Connect

    Carrano, Carl J.; Wang, Xiaoping; Poola, Bhaskar; Powell, Cynthia B.; Richmond, Michael G.

    2009-01-01

    The reactivity of the labile cluster Os3(CO)10(MeCN)2 (1) with the monofunctionalized heterocyclic ligands 6-R-2,2 -bipyridine (where R = Et, Ph) has been investigated. The alkyl-substituted heterocycle 6-Et-2,2 -bipyridine reacts with 1 in refluxing CH2Cl2 to give an isomeric mixture of HOs3(CO)9(N2C12H11) due to cyclometalation of the side-chain ethyl group (2) and ortho metalation of the unsubstituted bipyridine ring (3). The solid-state structure of the latter cluster, HOs3(CO)9(N2C10H6-6-Et) (3), has unequivocally established the site of the C-H bond activation in the product. Treatment of 1 with the aryl-substituted ligand 6-Ph-2,2 -bipyridine proceeds similarly with ortho metalation at the ancillary phenyl group and the C-6 ortho site of the unsubstituted bipyridine ring, as verified by 1H NMR spectroscopy. The X-ray diffraction structure of the thermodynamically more stable bipyridine-metalated cluster HOs3(CO)9(N2C10H6-6-Ph) (5) has been determined. The course of these reactions is discussed with respect to our recent study involving the reaction of cluster 1 with the ligand 6-Me-2,2 -bipyridine. Graphical Abstract The reaction between the labile cluster Os3(CO)10(MeCN)2 (1) and the monofunctionalized heterocyclic ligand 6-Et-2,2 -bipyridine proceeds readily at room temperature to furnish an isomeric mixture of the cyclometalated and ortho-metalated hydride-bridged clusters HOs3(CO)9(N2C12H11) (2 and 3). Treatment of 1 with 6-Ph-2,2 -bipyridine also yields two distinct hydride-containing clusters that result from independent ortho-metalation paths involving the 6-phenyl substituent and unsubstituted bipyridine group. The bipyridine-derived ortho metalation attendant in the new clusters HOs3(CO)9(N2C10H6-6-Et) (3) and HOs3(CO)9(N2C10H6-6-Ph) (5) has been established by X-ray crystallography.

  16. Palladium-catalysed transannular C-H functionalization of alicyclic amines

    NASA Astrophysics Data System (ADS)

    Topczewski, Joseph J.; Cabrera, Pablo J.; Saper, Noam I.; Sanford, Melanie S.

    2016-03-01

    Discovering pharmaceutical candidates is a resource-intensive enterprise that frequently requires the parallel synthesis of hundreds or even thousands of molecules. C-H bonds are present in almost all pharmaceutical agents. Consequently, the development of selective, rapid and efficient methods for converting these bonds into new chemical entities has the potential to streamline pharmaceutical development. Saturated nitrogen-containing heterocycles (alicyclic amines) feature prominently in pharmaceuticals, such as treatments for depression (paroxetine, amitifadine), diabetes (gliclazide), leukaemia (alvocidib), schizophrenia (risperidone, belaperidone), malaria (mefloquine) and nicotine addiction (cytisine, varenicline). However, existing methods for the C-H functionalization of saturated nitrogen heterocycles, particularly at sites remote to nitrogen, remain extremely limited. Here we report a transannular approach to selectively manipulate the C-H bonds of alicyclic amines at sites remote to nitrogen. Our reaction uses the boat conformation of the substrates to achieve palladium-catalysed amine-directed conversion of C-H bonds to C-C bonds on various alicyclic amine scaffolds. We demonstrate this approach by synthesizing new derivatives of several bioactive molecules, including varenicline.

  17. Palladium-catalysed transannular C-H functionalization of alicyclic amines.

    PubMed

    Topczewski, Joseph J; Cabrera, Pablo J; Saper, Noam I; Sanford, Melanie S

    2016-03-10

    Discovering pharmaceutical candidates is a resource-intensive enterprise that frequently requires the parallel synthesis of hundreds or even thousands of molecules. C-H bonds are present in almost all pharmaceutical agents. Consequently, the development of selective, rapid and efficient methods for converting these bonds into new chemical entities has the potential to streamline pharmaceutical development. Saturated nitrogen-containing heterocycles (alicyclic amines) feature prominently in pharmaceuticals, such as treatments for depression (paroxetine, amitifadine), diabetes (gliclazide), leukaemia (alvocidib), schizophrenia (risperidone, belaperidone), malaria (mefloquine) and nicotine addiction (cytisine, varenicline). However, existing methods for the C-H functionalization of saturated nitrogen heterocycles, particularly at sites remote to nitrogen, remain extremely limited. Here we report a transannular approach to selectively manipulate the C-H bonds of alicyclic amines at sites remote to nitrogen. Our reaction uses the boat conformation of the substrates to achieve palladium-catalysed amine-directed conversion of C-H bonds to C-C bonds on various alicyclic amine scaffolds. We demonstrate this approach by synthesizing new derivatives of several bioactive molecules, including varenicline.

  18. Dirhodium-catalyzed C-H arene amination using hydroxylamines.

    PubMed

    Paudyal, Mahesh P; Adebesin, Adeniyi Michael; Burt, Scott R; Ess, Daniel H; Ma, Zhiwei; Kürti, László; Falck, John R

    2016-09-01

    Primary and N-alkyl arylamine motifs are key functional groups in pharmaceuticals, agrochemicals, and functional materials, as well as in bioactive natural products. However, there is a dearth of generally applicable methods for the direct replacement of aryl hydrogens with NH2/NH(alkyl) moieties. Here, we present a mild dirhodium-catalyzed C-H amination for conversion of structurally diverse monocyclic and fused aromatics to the corresponding primary and N-alkyl arylamines using NH2/NH(alkyl)-O-(sulfonyl)hydroxylamines as aminating agents; the relatively weak RSO2O-N bond functions as an internal oxidant. The methodology is operationally simple, scalable, and fast at or below ambient temperature, furnishing arylamines in moderate-to-good yields and with good regioselectivity. It can be readily extended to the synthesis of fused N-heterocycles. PMID:27609890

  19. Dirhodium Catalyzed C-H Arene Amination using Hydroxylamines

    PubMed Central

    Paudyal, Mahesh P.; Adebesin, Adeniyi Michael; Burt, Scott R.; Ess, Daniel H.; Ma, Zhiwei; Kürti, László; Falck, John R.

    2016-01-01

    Primary and N-alkyl arylamine motifs are key functional groups in pharmaceuticals, agrochemicals and functional materials as well as in bioactive natural products. However, there is a dearth of generally applicable methods for the direct replacement of aryl hydrogens with –NH2/-NH-alkyl moieties. Here, we present a mild dirhodium-catalyzed C-H amination for conversion of structurally diverse monocyclic and fused aromatics to the corresponding primary and N-alkyl arylamines using either NH2/NHalkyl-O-(sulfonyl)hydroxylamines as aminating agents; the relatively weak RSO2O-N bond functions as an internal oxidant. The methodology is operationally simple, scalable, and fast at or below ambient temperature, furnishing arylamines in moderate-to-good yields and with good regioselectivity. It can be readily extended to the synthesis of fused N-heterocycles. PMID:27609890

  20. Charge-transfer-directed radical substitution enables para-selective C-H functionalization

    NASA Astrophysics Data System (ADS)

    Boursalian, Gregory B.; Ham, Won Seok; Mazzotti, Anthony R.; Ritter, Tobias

    2016-08-01

    Efficient C-H functionalization requires selectivity for specific C-H bonds. Progress has been made for directed aromatic substitution reactions to achieve ortho and meta selectivity, but a general strategy for para-selective C-H functionalization has remained elusive. Herein we introduce a previously unappreciated concept that enables nearly complete para selectivity. We propose that radicals with high electron affinity elicit arene-to-radical charge transfer in the transition state of radical addition, which is the factor primarily responsible for high positional selectivity. We demonstrate with a simple theoretical tool that the selectivity is predictable and show the utility of the concept through a direct synthesis of aryl piperazines. Our results contradict the notion, widely held by organic chemists, that radical aromatic substitution reactions are inherently unselective. The concept of radical substitution directed by charge transfer could serve as the basis for the development of new, highly selective C-H functionalization reactions.

  1. Liquid-liquid interfaces of semifluorinated alkane diblock copolymers with water, alkanes, and perfluorinated alkanes.

    SciTech Connect

    Perahia, Dvora, Dr.; Pierce, Flint; Tsige, Mesfin; Grest, Gary Stephen, Dr.

    2008-08-01

    The liquid-liquid interface between semifluorinated alkane diblock copolymers of the form F3C(CF2)n-1-(CH2)m-1CH3 and water, protonated alkanes, and perfluorinated alkanes are studied by fully atomistic molecular dynamics simulations. A modified version of the OPLS-AA (Optimized Parameter for Liquid Simulation All-Atom) force field of Jorgensen et al. has been used to study the interfacial behavior of semifluorinated diblocks. Aqueous interfaces are found to be sharp, with correspondingly large values of the interfacial tension. Due to the reduced hydrophobicity of the protonated block compared to the fluorinated block, hydrogen enhancement is observed at the interface. Water dipoles in the interfacial region are found to be oriented nearly parallel to the liquid-liquid interface. A number of protonated alkanes and perfluorinated alkanes are found to be mutually miscible with the semifluorinated diblocks. For these liquids, interdiffusion follows the expected Fickian behavior, and concentration-dependent diffusivities are determined.

  2. Ruthenium(0)-Catalyzed C-H Arylation of Aromatic Imines under Neutral Conditions: Access to Biaryl Aldehydes.

    PubMed

    Hu, Feng; Szostak, Michal

    2016-09-01

    The first ruthenium(0)-catalyzed C-H bond arylation of aromatic imines with arylboronates under neutral conditions is reported. This versatile method provides rapid access to a wide range of biaryl aldehydes that are difficult to assemble using traditional methods with high atom economy. A new hydrogen acceptor for Ru(0) arylation has been identified. This atom-economical strategy has potential for an array of direct applications in Ru(0)-catalyzed C-H bond arylations using removable directing groups. An indole synthesis by a sequential one-pot, multiple C-H activation protocol is reported. PMID:27529187

  3. Synthesis of heterocyclic compounds through palladium-catalyzed C-H cyclization processes.

    PubMed

    Inamoto, Kiyofumi

    2013-01-01

    Herein, we describe our development of synthetic methods for heterocyclic compounds based on the palladium-catalyzed carbon-hydrogen bond (C-H) functionalization/intramolecular carbon-heteroatom (nitrogen or sulfur) bond formation process. By this C-H cyclization method, we efficiently prepared various N-heterocycles, including indazoles, indoles, and 2-quinolinones, as well as S-heterocycles such as benzothiazoles and benzo[b]thiophenes. Yields are typically good to high and good functional-group tolerance is observed for each process, thereby indicating that the method provides a novel, highly applicable synthetic route to the abovementioned biologically important heterocyclic frameworks. As an application of this approach, an auto-tandem-type, one-pot process involving the oxidative Heck reaction and subsequent C-H cyclization using cinnamamides and arylboronic acids as starting materials in the presence of a palladium catalyst was also developed for the rapid construction of the 2-quinolinone nucleus. PMID:24088691

  4. A steric tethering approach enables palladium-catalysed C-H activation of primary amino alcohols.

    PubMed

    Calleja, Jonas; Pla, Daniel; Gorman, Timothy W; Domingo, Victoriano; Haffemayer, Benjamin; Gaunt, Matthew J

    2015-12-01

    Aliphatic primary amines are a class of chemical feedstock essential to the synthesis of higher-order nitrogen-containing molecules, commonly found in biologically active compounds and pharmaceutical agents. New methods for the construction of complex amines remain a continuous challenge to synthetic chemists. Here, we outline a general palladium-catalysed strategy for the functionalization of aliphatic C-H bonds within amino alcohols, an important class of small molecule. Central to this strategy is the temporary conversion of catalytically incompatible primary amino alcohols into hindered secondary amines that are capable of undergoing a sterically promoted palladium-catalysed C-H activation. Furthermore, a hydrogen bond between amine and catalyst intensifies interactions around the palladium and orients the aliphatic amine substituents in an ideal geometry for C-H activation. This catalytic method directly transforms simple, easily accessible amines into highly substituted, functionally concentrated and structurally diverse products, and can streamline the synthesis of biologically important amine-containing molecules.

  5. A steric tethering approach enables palladium-catalysed C-H activation of primary amino alcohols

    NASA Astrophysics Data System (ADS)

    Calleja, Jonas; Pla, Daniel; Gorman, Timothy W.; Domingo, Victoriano; Haffemayer, Benjamin; Gaunt, Matthew J.

    2015-12-01

    Aliphatic primary amines are a class of chemical feedstock essential to the synthesis of higher-order nitrogen-containing molecules, commonly found in biologically active compounds and pharmaceutical agents. New methods for the construction of complex amines remain a continuous challenge to synthetic chemists. Here, we outline a general palladium-catalysed strategy for the functionalization of aliphatic C-H bonds within amino alcohols, an important class of small molecule. Central to this strategy is the temporary conversion of catalytically incompatible primary amino alcohols into hindered secondary amines that are capable of undergoing a sterically promoted palladium-catalysed C-H activation. Furthermore, a hydrogen bond between amine and catalyst intensifies interactions around the palladium and orients the aliphatic amine substituents in an ideal geometry for C-H activation. This catalytic method directly transforms simple, easily accessible amines into highly substituted, functionally concentrated and structurally diverse products, and can streamline the synthesis of biologically important amine-containing molecules.

  6. Copper-catalyzed aliphatic C-H amination with an amidine moiety.

    PubMed

    Chen, Hui; Sanjaya, Stephen; Wang, Yi-Feng; Chiba, Shunsuke

    2013-01-01

    A method for amination of aliphatic C-H bonds of N-alkylamidines is described that utilizes Cu(OAc)(2) as the catalyst in the presence of PhI(OAc)(2) and K(3)PO(4). The resulting products, dihydroimidazoles and tetrahydropyrimidines, could be converted into the corresponding diamines by hydride reduction. PMID:23252919

  7. Direct C-H alkylation and indole formation of anilines with diazo compounds under rhodium catalysis.

    PubMed

    Mishra, Neeraj Kumar; Choi, Miji; Jo, Hyeim; Oh, Yongguk; Sharma, Satyasheel; Han, Sang Hoon; Jeong, Taejoo; Han, Sangil; Lee, Seok-Yong; Kim, In Su

    2015-12-18

    The rhodium(III)-catalyzed direct functionalization of aniline C-H bonds with α-diazo compounds is described. These transformations provide a facile construction of ortho-alkylated anilines with diazo malonates or highly substituted indoles with diazo acetoacetates.

  8. Carbonylation of hydrocarbons via C-H activation catalyzed by RhCl(CO)(PMe sub 3 ) sub 2 under irradiation

    SciTech Connect

    Sakakura, Toshiyasu; Sodeyama, Touru; Tanaka, Masato ); Sasaki, Koushi; Wada, Keisuke )

    1990-09-26

    C-H bonds in hydrocarbons are carbonylated into aldehydes by reaction with carbon monoxide in the presence of RhCl(CO)(PR{sub 3}){sub 2} under irradiation. The reaction proceeds at an ambient temperature under an atmospheric pressure of CO. The catalytic activity of RhCl(CO)(PR{sub 3}){sub 2} decreases in the order PMe{sub 3} {approx} 1,3,4-trimethylphospholane {approx} 1,3,4-trimethylphospholene > P(CH{sub 2}O){sub 3}CMe > PEt{sub 3} {approx} PBu{sub 3} > P(i-Pr){sub 3} {approx} P(OMe){sub 3} > dppe. The thiocyanato complex exhibits a similar catalytic activity to the chloro complex. The use of other complexes of Co, Ir, and Ru resulted in much lower catalytic activities. In the carbonylation of benzene, benzophenone and benzyl alcohol are formed as byproducts. The yield of benzaldehyde reached 3.3% on the basis of benzene. Monosubstituted benzenes are converted mainly to meta-substituted benzaldehydes. In the reaction of n-alkanes, a terminal methyl group is selectively carbonylated to give a linear aldehyde.

  9. Approximate thermochemical tables for some C-H and C-H-O species

    NASA Technical Reports Server (NTRS)

    Bahn, G. S.

    1973-01-01

    Approximate thermochemical tables are presented for some C-H and C-H-O species and for some ionized species, supplementing the JANAF Thermochemical Tables for application to finite-chemical-kinetics calculations. The approximate tables were prepared by interpolation and extrapolation of limited available data, especially by interpolations over chemical families of species. Original estimations have been smoothed by use of a modification for the CDC-6600 computer of the Lewis Research Center PACl Program which was originally prepared for the IBM-7094 computer Summary graphs for various families show reasonably consistent curvefit values, anchored by properties of existing species in the JANAF tables.

  10. Diffusion of squalene in n-alkanes and squalane.

    PubMed

    Kowert, Bruce A; Watson, Michael B; Dang, Nhan C

    2014-02-27

    Squalene, an intermediate in the biosynthesis of cholesterol, has a 24-carbon backbone with six methyl groups and six isolated double bonds. Capillary flow techniques have been used to determine its translational diffusion constant, D, at room temperature in squalane, n-C16, and three n-C8-squalane mixtures. The D values have a weaker dependence on viscosity, η, than predicted by the Stokes-Einstein relation, D = kBT/(6πηr). A fit to the modified relation, D/T = ASE/η(p), gives p = 0.820 ± 0.028; p = 1 for the Stokes-Einstein limit. The translational motion of squalene appears to be much like that of n-alkane solutes with comparable chain lengths; their D values show similar deviations from the Stokes-Einstein model. The n-alkane with the same carbon chain length as squalene, n-C24, has a near-equal p value of 0.844 ± 0.018 in n-alkane solvents. The values of the hydrodynamic radius, r, for n-C24, squalene, and other n-alkane solutes decrease as the viscosity increases and have a common dependence on the van der Waals volumes of the solute and solvent. The possibility of studying squalene in lipid droplets and membranes is discussed.

  11. Diffusion of squalene in n-alkanes and squalane.

    PubMed

    Kowert, Bruce A; Watson, Michael B; Dang, Nhan C

    2014-02-27

    Squalene, an intermediate in the biosynthesis of cholesterol, has a 24-carbon backbone with six methyl groups and six isolated double bonds. Capillary flow techniques have been used to determine its translational diffusion constant, D, at room temperature in squalane, n-C16, and three n-C8-squalane mixtures. The D values have a weaker dependence on viscosity, η, than predicted by the Stokes-Einstein relation, D = kBT/(6πηr). A fit to the modified relation, D/T = ASE/η(p), gives p = 0.820 ± 0.028; p = 1 for the Stokes-Einstein limit. The translational motion of squalene appears to be much like that of n-alkane solutes with comparable chain lengths; their D values show similar deviations from the Stokes-Einstein model. The n-alkane with the same carbon chain length as squalene, n-C24, has a near-equal p value of 0.844 ± 0.018 in n-alkane solvents. The values of the hydrodynamic radius, r, for n-C24, squalene, and other n-alkane solutes decrease as the viscosity increases and have a common dependence on the van der Waals volumes of the solute and solvent. The possibility of studying squalene in lipid droplets and membranes is discussed. PMID:24528091

  12. Addition, cycloaddition, and metathesis reactions of the cationic carbyne complexes [Cp(CO)[sub 2]Mn[triple bond]CCH[sub 2]R][sup +] and neutral vinylidene complexes Cp(CO)[sub 2]M=C=C(H)R (M = Mn, Re)

    SciTech Connect

    Terry, M.R.; Mercando, L.A.; Kelley, C.; Geoffroy, G.L. ); Nombel, P.; Lugan, N.; Mathieu, R. ); Ostrander, R.L.; Owens-Waltermire, B.E.; Rheingold, A.L. )

    1994-03-01

    The cationic alkylidyne complexes [Cp(CO)[sub 2]M=VCCH[sub 2]R][sup +] (M = Re, R = H; M = Mn, R = H, Me, Ph) undergo facile deprotonation to give the corresponding neutral vinylidene complexes Cp(CO)[sub 2]M=C=C(H)R. For [Cp(CO)[sub 2]Re=VCCH[sub 3

  13. Effect of C-H ⋯ S and C-H ⋯ Cl interactions on the conformational preference of inhibitors of TIBO family

    NASA Astrophysics Data System (ADS)

    Freitas, Renato F.; Galembeck, Sérgio E.

    2006-05-01

    he non-nucleoside inhibitors of HIV-1 reverse transcriptase (NNRTIs) are an important class of drugs employed in antiviral therapy. The coordinates of three inhibitors, derived from TIBO, tetrahydroimidazo-(4,5,1-1- jk)(1,4)-benzodi-azepin-2(1 H)-one (which belongs to the NNRTIs class), were taken from PDB database and the electronic structure were investigated by using the B3LYP/6-31+G(d,p) model. Results obtained by means of the natural bond orbital (NBO) and atoms in molecules (AIM) methods indicated the presence of weak hydrogen bonds of the C-H ⋯ S and C-H ⋯ Cl type, which are partially responsible for the conformational differences observed between the inhibitors 8 Cl-TIBO and 9 Cl-TIBO.

  14. Dehydrogenation of n-alkanes catalyzed by iridium ``pincer`` complexes: Regioselective formation of {alpha}-olefins

    SciTech Connect

    Liu, F.; Singh, B.; Goldman, A.S.; Pak, E.B.; Jensen, C.M.

    1999-04-28

    The development of methods for the functionalization of alkanes is of cardinal importance in catalytic chemistry. A specific functionalization of particularly great potential value is the conversion of n-alkanes to the corresponding 1-alkenes ({alpha}-olefins) since these serve as precursors for a wide range of commodity-scale chemicals (>2 {times} 10{sup 9} kg/yr). Such a conversion is also an intriguing challenge as viewed from a fundamental perspective. n-Alkanes are the simplest organic molecules with the potential to undergo regioselective transformations; {alpha}-olefins are the thermodynamically least stable of the corresponding double-bond isomers and any mechanism for their formation must presumably involve activation of the strongest bond (primary C-{single_bond}H) in the molecule.

  15. Aliphatic C-H to C-C Conversion: Synthesis of (−)-Cameroonan-7α-ol

    PubMed Central

    Taber, Douglass F.; Nelson, Christopher G.

    2011-01-01

    In the course of a synthesis of the tricyclic sesquiterpene (−)-cameroonan-7α-ol from the acyclic (+)-citronellal, seven aliphatic C-H bonds were converted to C-C bonds, and three rings and four new stereogenic centers were established. PMID:21344897

  16. Liquid alkanes with targeted molecular weights from biomass-derived carbohydrates.

    PubMed

    West, Ryan M; Liu, Zhen Y; Peter, Maximilian; Dumesic, James A

    2008-01-01

    Liquid transportation fuels must burn cleanly and have high energy densities, criteria that are currently fulfilled by petroleum, a non-renewable resource, the combustion of which leads to increasing levels of atmospheric CO(2). An attractive approach for the production of transportation fuels from renewable biomass resources is to convert carbohydrates into alkanes with targeted molecular weights, such as C(8)-C(15) for jet-fuel applications. Targeted n-alkanes can be produced directly from fructose by an integrated process involving first the dehydration of this C(6) sugar to form 5-hydroxymethylfurfural, followed by controlled formation of C-C bonds with acetone to form C(9) and C(15) compounds, and completed by hydrogenation and hydrodeoxygenation reactions to form the corresponding n-alkanes. Analogous reactions are demonstrated starting with 5-methylfurfural or 2-furaldehyde, with the latter leading to C(8) and C(13) n-alkanes. PMID:18702136

  17. Allylic C-H amination for the preparation of syn-1,3-amino alcohol motifs.

    PubMed

    Rice, Grant T; White, M Christina

    2009-08-26

    A highly selective and general Pd/sulfoxide-catalyzed allylic C-H amination reaction en route to syn-1,3-amino alcohol motifs is reported. Key to achieving this reactivity under mild conditions is the use of electron-deficient N-nosyl carbamate nucleophiles that are thought to promote functionalization by furnishing higher concentrations of anionic species in situ. The reaction is shown to be orthogonal to classical C-C bond-forming/-reduction sequences as well as nitrene-based C-H amination methods.

  18. C-H functionalization: thoroughly tuning ligands at a metal ion, a chemist can greatly enhance catalyst's activity and selectivity.

    PubMed

    Shul'pin, Georgiy B

    2013-09-28

    This brief essay consists of a few "exciting stories" devoted to relations within a metal-complex catalyst between a metal ion and a coordinated ligand. When, as in the case of a human couple, the rapport of the partners is cordial and a love cements these relations, a chemist finds an ideal married couple, in other words he obtains a catalyst of choice which allows him to functionalize C-H bonds very efficiently and selectively. Examples of such lucky marriages in the catalytic world of ions and ligands are discussed here. Activity of the catalyst is characterized by turnover number (TON) or turnover frequency (TOF) as well as by yield of a target product. Introducing a chelating N,N- or N,O-ligand to the catalyst molecule (this can be an iron or manganese derivative) sharply enhances its activity. However, the activity of vanadium derivatives (with additionally added to the solution pyrazinecarboxylic acid, PCA) as well as of various osmium complexes does not dramatically depend on the nature of ligands surrounding metal ions. Complexes of these metals are very efficient catalysts in oxidations with H2O2. Osmium derivatives are record-holders exhibiting extremely high TONs whereas vanadium complexes are on the second position. Finally, elegant examples of alkane functionalization on the ions of non-transition metals (aluminium, gallium etc.) are described when one ligand within the metal complex (namely, hydroperoxyl ligand HOO(-)) helps other ligand of this complex (H2O2 molecule coordinated to the metal) to disintegrate into two species, generating very reactive hydroxyl radical. Hydrogen peroxide molecule, even ligated to the metal ion, is perfectly stable without the assistance of the neighboring HOO(-) ligand. This ligand can be easily oxidized donating an electron to its partner ligand (H2O2). In an analogous case, when the central ion in the catalyst is a transition metal, this ion changing its oxidation state can donate an electron to the coordinated H2O2

  19. Low-valent cobalt catalysis: new opportunities for C-H functionalization.

    PubMed

    Gao, Ke; Yoshikai, Naohiko

    2014-04-15

    Rapid progress in the fields of organometallic chemistry and homogeneous catalysis has made it possible for synthetic chemists to consider using ubiquitous yet unreactive C-H bonds as starting points to construct complex organic molecules. However, a majority of the C-H functionalization reactions currently in use require noble transition metal catalysts and harsh reaction conditions, so researchers have placed a priority on the development of mild and cost-effective catalysts. Given this situation, we wondered whether earth-abundant first-row transition metals could emulate the reactivity of a noble transition metal catalyst and carry out similar C-H functionalization reactions at a lower cost and under milder conditions. We also wondered whether we could use first-row transition metals to achieve hitherto unknown, but useful, C-H functionalization reactions. This Account summarizes our research on the development of three different types of C-H functionalization reactions using low-valent cobalt catalysts: (1) hydroarylation of alkynes and olefins, (2) ortho C-H functionalization with electrophiles, and (3) addition of arylzinc reagents to alkynes involving 1,4-cobalt migration. Although synthetic chemists have previously paid little attention to cobalt in designing catalytic C-H functionalization reactions, earlier studies, particularly those on stoichiometric cyclometalation, inspired us as we developed the hydroarylation and ortho C-H functionalization reactions. In these transformations, we combined a cobalt precatalyst, a ligand (such as phosphine or N-heterocyclic carbene (NHC)), and Grignard reagent to generate low-valent cobalt catalysts. These novel catalysts promoted a series of pyridine- and imine-directed hydroarylation reactions of alkynes and olefins at mild temperatures. Notably, we observed branched-selective addition to styrenes, which highlights a distinct regioselectivity of the cobalt catalyst compared with typical rhodium and ruthenium

  20. Spectroscopic Evidence for the Two C-H-Cleaving Intermediates of Aspergillus nidulans Isopenicillin N Synthase.

    PubMed

    Tamanaha, Esta; Zhang, Bo; Guo, Yisong; Chang, Wei-Chen; Barr, Eric W; Xing, Gang; St Clair, Jennifer; Ye, Shengfa; Neese, Frank; Bollinger, J Martin; Krebs, Carsten

    2016-07-20

    The enzyme isopenicillin N synthase (IPNS) installs the β-lactam and thiazolidine rings of the penicillin core into the linear tripeptide l-δ-aminoadipoyl-l-Cys-d-Val (ACV) on the pathways to a number of important antibacterial drugs. A classic set of enzymological and crystallographic studies by Baldwin and co-workers established that this overall four-electron oxidation occurs by a sequence of two oxidative cyclizations, with the β-lactam ring being installed first and the thiazolidine ring second. Each phase requires cleavage of an aliphatic C-H bond of the substrate: the pro-S-CCys,β-H bond for closure of the β-lactam ring, and the CVal,β-H bond for installation of the thiazolidine ring. IPNS uses a mononuclear non-heme-iron(II) cofactor and dioxygen as cosubstrate to cleave these C-H bonds and direct the ring closures. Despite the intense scrutiny to which the enzyme has been subjected, the identities of the oxidized iron intermediates that cleave the C-H bonds have been addressed only computationally; no experimental insight into their geometric or electronic structures has been reported. In this work, we have employed a combination of transient-state-kinetic and spectroscopic methods, together with the specifically deuterium-labeled substrates, A[d2-C]V and AC[d8-V], to identify both C-H-cleaving intermediates. The results show that they are high-spin Fe(III)-superoxo and high-spin Fe(IV)-oxo complexes, respectively, in agreement with published mechanistic proposals derived computationally from Baldwin's founding work.

  1. Spectroscopic Evidence for the Two C-H-Cleaving Intermediates of Aspergillus nidulans Isopenicillin N Synthase.

    PubMed

    Tamanaha, Esta; Zhang, Bo; Guo, Yisong; Chang, Wei-Chen; Barr, Eric W; Xing, Gang; St Clair, Jennifer; Ye, Shengfa; Neese, Frank; Bollinger, J Martin; Krebs, Carsten

    2016-07-20

    The enzyme isopenicillin N synthase (IPNS) installs the β-lactam and thiazolidine rings of the penicillin core into the linear tripeptide l-δ-aminoadipoyl-l-Cys-d-Val (ACV) on the pathways to a number of important antibacterial drugs. A classic set of enzymological and crystallographic studies by Baldwin and co-workers established that this overall four-electron oxidation occurs by a sequence of two oxidative cyclizations, with the β-lactam ring being installed first and the thiazolidine ring second. Each phase requires cleavage of an aliphatic C-H bond of the substrate: the pro-S-CCys,β-H bond for closure of the β-lactam ring, and the CVal,β-H bond for installation of the thiazolidine ring. IPNS uses a mononuclear non-heme-iron(II) cofactor and dioxygen as cosubstrate to cleave these C-H bonds and direct the ring closures. Despite the intense scrutiny to which the enzyme has been subjected, the identities of the oxidized iron intermediates that cleave the C-H bonds have been addressed only computationally; no experimental insight into their geometric or electronic structures has been reported. In this work, we have employed a combination of transient-state-kinetic and spectroscopic methods, together with the specifically deuterium-labeled substrates, A[d2-C]V and AC[d8-V], to identify both C-H-cleaving intermediates. The results show that they are high-spin Fe(III)-superoxo and high-spin Fe(IV)-oxo complexes, respectively, in agreement with published mechanistic proposals derived computationally from Baldwin's founding work. PMID:27193226

  2. Diverse sp3 C-H functionalization through alcohol β-sulfonyloxylation

    NASA Astrophysics Data System (ADS)

    Xu, Yan; Yan, Guobing; Ren, Zhi; Dong, Guangbin

    2015-10-01

    Site-selective C-H functionalization has emerged as an attractive tool for derivatizing complex synthetic intermediates, but its use for late-stage diversification is limited by the functional groups that can be introduced, especially at unactivated sp3-hybridized positions. To overcome this, we introduce a strategy that directly installs a sulfonyloxy group at a β-C-H bond of a masked alcohol and subsequently employs nucleophilic substitution reactions to prepare various derivatives. Hydroxyl groups are widely found in bioactive molecules and are thus readily available as synthetic handles. A directing group is easily added (and subsequently removed) from the alcohols such that a formal site-selective β-C-H sulfonyloxylation of these alcohols is achieved. Substitution reactions with carbon, nitrogen, oxygen and other nucleophiles then lead to diverse functionalizations that may help to streamline the synthesis of complex analogues for drug discovery.

  3. Dehydrative Direct C-H Allylation with Allylic Alcohols under [Cp*Co(III)] Catalysis.

    PubMed

    Suzuki, Yudai; Sun, Bo; Sakata, Ken; Yoshino, Tatsuhiko; Matsunaga, Shigeki; Kanai, Motomu

    2015-08-17

    The unique reactivity of [Cp*Co(III)] over [Cp*Rh(III)] was demonstrated. A cationic [Cp*Co(III)] catalyst promoted direct dehydrative C-H allylation with non-activated allyl alcohols, thus giving C2-allylated indoles, pyrrole, and phenyl-pyrazole in good yields, while analogous [Cp*Rh(III)] catalysts were not effective. The high γ-selectivity and C2-selectivity indicated that the reaction proceeded by directing-group-assisted C-H metalation. DFT calculations suggested that the γ-selective substitution reaction proceeded by C-H metalation and insertion of a C-C double bond, with subsequent β-hydroxide elimination. The [Cp*Co(III)] catalyst favored β-hydroxide elimination over β-hydride elimination.

  4. Copper-catalyzed aerobic oxidative C-H functionalizations: trends and mechanistic insights.

    PubMed

    Wendlandt, Alison E; Suess, Alison M; Stahl, Shannon S

    2011-11-18

    The selective oxidation of C-H bonds and the use of O(2) as a stoichiometric oxidant represent two prominent challenges in organic chemistry. Copper(II) is a versatile oxidant, capable of promoting a wide range of oxidative coupling reactions initiated by single-electron transfer (SET) from electron-rich organic molecules. Many of these reactions can be rendered catalytic in Cu by employing molecular oxygen as a stoichiometric oxidant to regenerate the active copper(II) catalyst. Meanwhile, numerous other recently reported Cu-catalyzed C-H oxidation reactions feature substrates that are electron-deficient or appear unlikely to undergo single-electron transfer to copper(II). In some of these cases, evidence has been obtained for the involvement of organocopper(III) intermediates in the reaction mechanism. Organometallic C-H oxidation reactions of this type represent important new opportunities for the field of Cu-catalyzed aerobic oxidations. PMID:22034061

  5. High-Turnover Aromatic C-H Borylation Catalyzed by POCOP-Type Pincer Complexes of Iridium.

    PubMed

    Press, Loren P; Kosanovich, Alex J; McCulloch, Billy J; Ozerov, Oleg V

    2016-08-01

    The catalytic C-H borylation of arenes with HBpin (pin = pinacolate) using POCOP-type pincer complexes of Ir has been demonstrated, with turnover numbers exceeding 10 000 in some cases. The selectivity of C-H activation was based on steric preferences and largely mirrored that found in other Ir borylation catalysts. Catalysis in the (POCOP)Ir system depends on the presence of stoichiometric quantities of sacrificial olefin, which is hydrogenated to consume the H2 equivalents generated in the borylation of C-H bonds with HBpin. Smaller olefins such as ethylene or 1-hexene were more advantageous to catalysis than sterically encumbered tert-butylethylene (TBE). Olefin hydroboration is a competing side reaction. The synthesis and isolation of multiple complexes potentially relevant to catalysis permitted examination of several key elementary reactions. These experiments indicate that the C-H activation step in catalysis ostensibly involves oxidative addition of an aromatic C-H bond to the three-coordinate (POCOP)Ir species. The olefin is mechanistically critical to gain access to this 14-electron, monovalent Ir intermediate. C-H activation at Ir(I) here is in contrast to the olefin-free catalysis with state-of-the-art Ir complexes supported by neutral bidentate ligands, where the C-H activating step is understood to involve trivalent Ir-boryl intermediates. PMID:27327895

  6. Aromatic Cyanoalkylation through Double C-H Activation Mediated by Ni(III).

    PubMed

    Zhou, Wen; Zheng, Shuai; Schultz, Jason W; Rath, Nigam P; Mirica, Liviu M

    2016-05-11

    Herein we report an atom- and step-economic aromatic cyanoalkylation reaction that employs nitriles as building blocks and proceeds through Csp(2)-H and Csp(3)-H bond activation steps mediated by Ni(III). In addition to cyanomethylation with MeCN, regioselective α-cyanoalkylation was observed with various nitrile substrates to generate secondary and tertiary nitriles. Importantly, to the best of our knowledge these are the first examples of C-H bond activation reactions occurring at a Ni(III) center, which may exhibit different reactivity and selectivity profiles than those corresponding to analogous Ni(II) centers. These studies provide guiding principles to design catalytic C-H activation and functionalization reactions involving high-valent Ni species. PMID:27120207

  7. Cupric-Superoxo Mediated Inter-Molecular C-H Activation Chemistry

    PubMed Central

    Peterson, Ryan L.; Himes, Richard A.; Kotani, Hiroaki; Suenobu, Tomoyoshi; Tian, Li; Siegler, Maxime A.; Solomon, Edward I.; Fukuzumi, Shunichi; Karlin, Kenneth D.

    2011-01-01

    A new cupric-superoxo complex [LCuII(O2•−)]+, which possesses particularly strong O–O and Cu–O bonding, is capable of intermolecular C-H activation of the NADH analogue 1-benzyl-1,4-dihydronicotinamide (BNAH). Kinetic studies indicate a first-order dependence on both the Cu-complex and BNAH with a deuterium kinetic isotope effect (KIE) of 12.1, similar to that observed for certain copper monooxygenases. PMID:21265534

  8. Ruthenium(II)-catalyzed C-H activation with isocyanates: a versatile route to phthalimides.

    PubMed

    De Sarkar, Suman; Ackermann, Lutz

    2014-10-20

    A cationic ruthenium(II)-complex was utilized in the efficient synthesis of phthalimide derivatives by C-H activation with synthetically useful amides. The reaction proceeded through a mechanistically unique insertion of a cycloruthenated species into a C-Het multiple bond of isocyanate. The novel method also proved applicable for the synthesis of heteroaromatic unsymmetric diamides as well as a potent COX-2 enzyme inhibitor.

  9. Carbon dioxide utilization via carbonate-promoted C-H carboxylation.

    PubMed

    Banerjee, Aanindeeta; Dick, Graham R; Yoshino, Tatsuhiko; Kanan, Matthew W

    2016-03-10

    Using carbon dioxide (CO2) as a feedstock for commodity synthesis is an attractive means of reducing greenhouse gas emissions and a possible stepping-stone towards renewable synthetic fuels. A major impediment to synthesizing compounds from CO2 is the difficulty of forming carbon-carbon (C-C) bonds efficiently: although CO2 reacts readily with carbon-centred nucleophiles, generating these intermediates requires high-energy reagents (such as highly reducing metals or strong organic bases), carbon-heteroatom bonds or relatively acidic carbon-hydrogen (C-H) bonds. These requirements negate the environmental benefit of using CO2 as a substrate and limit the chemistry to low-volume targets. Here we show that intermediate-temperature (200 to 350 degrees Celsius) molten salts containing caesium or potassium cations enable carbonate ions (CO3(2-)) to deprotonate very weakly acidic C-H bonds (pKa > 40), generating carbon-centred nucleophiles that react with CO2 to form carboxylates. To illustrate a potential application, we use C-H carboxylation followed by protonation to convert 2-furoic acid into furan-2,5-dicarboxylic acid (FDCA)--a highly desirable bio-based feedstock with numerous applications, including the synthesis of polyethylene furandicarboxylate (PEF), which is a potential large-scale substitute for petroleum-derived polyethylene terephthalate (PET). Since 2-furoic acid can readily be made from lignocellulose, CO3(2-)-promoted C-H carboxylation thus reveals a way to transform inedible biomass and CO2 into a valuable feedstock chemical. Our results provide a new strategy for using CO2 in the synthesis of multi-carbon compounds.

  10. Carbon dioxide utilization via carbonate-promoted C-H carboxylation

    NASA Astrophysics Data System (ADS)

    Banerjee, Aanindeeta; Dick, Graham R.; Yoshino, Tatsuhiko; Kanan, Matthew W.

    2016-03-01

    Using carbon dioxide (CO2) as a feedstock for commodity synthesis is an attractive means of reducing greenhouse gas emissions and a possible stepping-stone towards renewable synthetic fuels. A major impediment to synthesizing compounds from CO2 is the difficulty of forming carbon-carbon (C-C) bonds efficiently: although CO2 reacts readily with carbon-centred nucleophiles, generating these intermediates requires high-energy reagents (such as highly reducing metals or strong organic bases), carbon-heteroatom bonds or relatively acidic carbon-hydrogen (C-H) bonds. These requirements negate the environmental benefit of using CO2 as a substrate and limit the chemistry to low-volume targets. Here we show that intermediate-temperature (200 to 350 degrees Celsius) molten salts containing caesium or potassium cations enable carbonate ions (CO32-) to deprotonate very weakly acidic C-H bonds (pKa > 40), generating carbon-centred nucleophiles that react with CO2 to form carboxylates. To illustrate a potential application, we use C-H carboxylation followed by protonation to convert 2-furoic acid into furan-2,5-dicarboxylic acid (FDCA)—a highly desirable bio-based feedstock with numerous applications, including the synthesis of polyethylene furandicarboxylate (PEF), which is a potential large-scale substitute for petroleum-derived polyethylene terephthalate (PET). Since 2-furoic acid can readily be made from lignocellulose, CO32--promoted C-H carboxylation thus reveals a way to transform inedible biomass and CO2 into a valuable feedstock chemical. Our results provide a new strategy for using CO2 in the synthesis of multi-carbon compounds.

  11. Carbon dioxide utilization via carbonate-promoted C-H carboxylation.

    PubMed

    Banerjee, Aanindeeta; Dick, Graham R; Yoshino, Tatsuhiko; Kanan, Matthew W

    2016-03-10

    Using carbon dioxide (CO2) as a feedstock for commodity synthesis is an attractive means of reducing greenhouse gas emissions and a possible stepping-stone towards renewable synthetic fuels. A major impediment to synthesizing compounds from CO2 is the difficulty of forming carbon-carbon (C-C) bonds efficiently: although CO2 reacts readily with carbon-centred nucleophiles, generating these intermediates requires high-energy reagents (such as highly reducing metals or strong organic bases), carbon-heteroatom bonds or relatively acidic carbon-hydrogen (C-H) bonds. These requirements negate the environmental benefit of using CO2 as a substrate and limit the chemistry to low-volume targets. Here we show that intermediate-temperature (200 to 350 degrees Celsius) molten salts containing caesium or potassium cations enable carbonate ions (CO3(2-)) to deprotonate very weakly acidic C-H bonds (pKa > 40), generating carbon-centred nucleophiles that react with CO2 to form carboxylates. To illustrate a potential application, we use C-H carboxylation followed by protonation to convert 2-furoic acid into furan-2,5-dicarboxylic acid (FDCA)--a highly desirable bio-based feedstock with numerous applications, including the synthesis of polyethylene furandicarboxylate (PEF), which is a potential large-scale substitute for petroleum-derived polyethylene terephthalate (PET). Since 2-furoic acid can readily be made from lignocellulose, CO3(2-)-promoted C-H carboxylation thus reveals a way to transform inedible biomass and CO2 into a valuable feedstock chemical. Our results provide a new strategy for using CO2 in the synthesis of multi-carbon compounds. PMID:26961655

  12. Nickel-Catalyzed C-H Chalcogenation of Anilines.

    PubMed

    Müller, Thomas; Ackermann, Lutz

    2016-09-26

    The C-H thiolation of aniline derivatives was accomplished with a versatile nickel(II) catalyst under ligand-free conditions. The robust nature of the nickel catalysis system was reflected by the C-H thiolation with a good functional group tolerance and an ample scope, employing anilines possessing removable directing groups. The widely applicable nickel catalyst also allowed for aniline C-H selenylations, while mechanistic studies provided strong support that the rate-determining step is the C-H activation. PMID:27501081

  13. Indirect C-H azidation of heterocycles via copper-catalyzed regioselective fragmentation of unsymmetrical λ3-iodanes.

    PubMed

    Lubriks, Dmitrijs; Sokolovs, Igors; Suna, Edgars

    2012-09-19

    A C-H bond of electron-rich heterocycles is transformed into a C-N bond in a reaction sequence comprising the formation of heteroaryl(phenyl)iodonium azides and their in situ regioselective fragmentation to heteroaryl azides. A Cu(I) catalyst ensures complete regiocontrol in the fragmentation step and catalyzes the subsequent 1,3-dipolar cycloaddition of the formed azido heterocycles with acetylenes. The heteroaryl azides can also be conveniently reduced to heteroarylamines by aqueous ammonium sulfide. The overall C-H to C-N transformation is a mild and operationally simple one-pot sequential multistep process. PMID:22913396

  14. Alkane-Based Urethane Potting Compounds

    NASA Technical Reports Server (NTRS)

    Morris, D. E.

    1986-01-01

    New low viscosity urethanes easily mixed, molded, and outgassed. Alkane-based urethanes resist hydrolysis and oxidation and have excellent dielectric properties. Low-viscosity alkane-based urethane prepolymer prepared by one-step reaction of either isophorone diisocyanate or methyl-bis (4-cyclohexyl isocyanate) with hydrogenated, hydroxy-terminated polybutadiene (HTPBD).

  15. Transition-state enthalpy and entropy effects on reactivity and selectivity in hydrogenolysis of n-alkanes.

    PubMed

    Flaherty, David W; Iglesia, Enrique

    2013-12-11

    Statistical mechanics and transition state (TS) theory describe rates and selectivities of C-C bond cleavage in C2-C10 n-alkanes on metal catalysts and provide a general description for the hydrogenolysis of hydrocarbons. Mechanistic interpretation shows the dominant role of entropy, over enthalpy, in determining the location and rate of C-C bond cleavage. Ir, Rh, and Pt clusters cleave C-C bonds at rates proportional to coverages of intermediates derived by removing 3-4 H-atoms from n-alkanes. Rate constants for C-C cleavage reflect large activation enthalpies (ΔH(‡), 217-257 kJ mol(-1)) that are independent of chain length and C-C bond location in C4+ n-alkanes. C-C bonds cleave because of large, positive activation entropies (ΔS(‡), 164-259 J mol(-1) K(-1)) provided by H2 that forms with TS. Kinetic and independent spectroscopic evidence for the composition and structure of these TS give accurate estimates of ΔS(‡) for cleavage at each C-C bond. Large differences between rate constants for ethane and n-decane (~10(8)) reflect an increase in the entropy of gaseous alkanes retained at the TS. The location of C-C bond cleavage depends solely on the rotational entropies of alkyl chains attached to the cleaved C-C bond, which depend on their chain length. Such entropy considerations account for the ubiquitous, but previously unexplained, preference for cleaving nonterminal C-C bonds in n-alkanes. This mechanistic analysis and thermodynamic treatment illustrates the continued utility of such approaches even for hydrogenolysis reactions, with complexity seemingly beyond the reach of classical treatments, and applies to catalytic clusters beyond those reported here (0.6-2.7 nm; Ir, Rh, Pt).

  16. Iron(0) mediated C-H activation of 1-hexyne: a mechanistic study using time-resolved infrared spectroscopy.

    PubMed

    Blank, Jan H; Raju, Rajesh K; Yan, Tao; Brothers, Edward N; Darensbourg, Marcetta Y; Bengali, Ashfaq A

    2016-08-01

    Photolysis of an iron tricarbonyl complex in the presence of 1-hexyne results in the activation of the terminal C-H bond to yield an iron-alkynyl species. The reaction proceeds through a single transition state with an activation enthalpy of 13.5 kcal mol(-1). The resulting molecule may have potential as a C-C bond formation reagent. PMID:27436484

  17. Radical C-H functionalization to construct heterocyclic compounds.

    PubMed

    Yu, Jin-Tao; Pan, Changduo

    2016-02-01

    Heterocyclic compounds are widely present in natural products, pharmaceuticals and bioactive molecules. Thus, organic and pharmaceutical chemists have been making extensive efforts to construct those heterocyclic frameworks through developing versatile and efficient synthetic strategies. The direct C-H functionalization via the radical pathway has emerged as a promising and dramatic approach towards heterocycles with high atom- and step-economy. Heterocyclic compounds such as coumarins, furans, benzofurans, xanthones, benzothiazoles, indoles, indolines, oxindoles, quinolines, isoquinolines, quinoxaline, and phenanthridines have been successfully synthesized by C-H functionalization through the radical pathway. In this review, recent advances on radical C-H functionalization to construct heterocyclic compounds are highlighted with discussions.

  18. TBAI-catalyzed oxidative C-H functionalization: a new route to benzo[b]phosphole oxides.

    PubMed

    Zhang, Yun; Hu, Gaobo; Ma, Dumei; Xu, Pengxiang; Gao, Yuxing; Zhao, Yufen

    2016-02-14

    The first metal-free, efficient TBAI-catalyzed radical addition/cyclization of diaryl(arylethynyl)phosphine oxides with toluene derivatives has been developed, affording a general, one-step approach to structurally sophisticated benzo[b]phosphole oxides via sequential C-H functionalization along with the formation of two new C-C bonds.

  19. Transition-metal-free C-H oxidative activation: persulfate-promoted selective benzylic mono- and difluorination.

    PubMed

    Ma, Jing-jing; Yi, Wen-bin; Lu, Guo-ping; Cai, Chun

    2015-03-14

    An operationally simple and selective method for the direct conversion of benzylic C-H to C-F to obtain mono- and difluoromethylated arenes using Selectfluor™ as a fluorine source is developed. Persulfate can be used to selectively activate benzylic hydrogen atoms toward C-F bond formation without the aid of transition metal catalysts.

  20. Meta-selective C-H functionalization using a nitrile-based directing group and cleavable Si-tether.

    PubMed

    Lee, Sunggi; Lee, Hyelee; Tan, Kian L

    2013-12-18

    A nitrile-based template that enables meta-selective C-H bond functionalization was developed. The template is applicable to a range of substituted arenes and tolerates a variety of functional groups. The directing group uses a silicon atom for attachment, allowing for a facile introduction/deprotection strategy increasing the synthetic practicality of this template.

  1. The anaerobic degradation of gaseous, nonmethane alkanes — From in situ processes to microorganisms

    PubMed Central

    Musat, Florin

    2015-01-01

    The short chain, gaseous alkanes ethane, propane, n- and iso-butane are released in significant amounts into the atmosphere, where they contribute to tropospheric chemistry and ozone formation. Biodegradation of gaseous alkanes by aerobic microorganisms, mostly bacteria and fungi isolated from terrestrial environments, has been known for several decades. The first indications for short chain alkane anaerobic degradation were provided by geochemical studies of deep-sea environments around hydrocarbon seeps, and included the uncoupling of the sulfate-reduction and anaerobic oxidation of methane rates, the consumption of gaseous alkanes in anoxic sediments, or the enrichment in 13C of gases in interstitial water vs. the source gas. Microorganisms able to degrade gaseous alkanes were recently obtained from deep-sea and terrestrial sediments around hydrocarbon seeps. Up to date, only sulfate-reducing pure or enriched cultures with ethane, propane and n-butane have been reported. The only pure culture presently available, strain BuS5, is affiliated to the Desulfosarcina–Desulfococcus cluster of the Deltaproteobacteria. Other phylotypes involved in gaseous alkane degradation have been identified based on stable-isotope labeling and whole-cell hybridization. Under anoxic conditions, propane and n-butane are activated similar to the higher alkanes, by homolytic cleavage of the C—H bond of a subterminal carbon atom, and addition of the ensuing radical to fumarate, yielding methylalkylsuccinates. An additional mechanism of activation at the terminal carbon atoms was demonstrated for propane, which could in principle be employed also for the activation of ethane. PMID:25904994

  2. Oxidative esterification via photocatalytic C-H activation

    EPA Science Inventory

    Direct oxidative esterification of alcohol via photocatalytic C-H activation has been developed using VO@g-C3N4 catalyst; an expeditious esterification of alcohols occurs under neutral conditions using visible light as the source of energy.

  3. Supported organoiridium catalysts for alkane dehydrogenation

    SciTech Connect

    Baker, R. Thomas; Sattelberger, Alfred P.; Li, Hongbo

    2013-09-03

    Solid supported organoiridium catalysts, a process for preparing such solid supported organoiridium catalysts, and the use of such solid supported organoiridium catalysts in dehydrogenation reactions of alkanes is provided. The catalysts can be easily recovered and recycled.

  4. ClogP(alk): a method for predicting alkane/water partition coefficient.

    PubMed

    Kenny, Peter W; Montanari, Carlos A; Prokopczyk, Igor M

    2013-05-01

    Alkane/water partition coefficients (P(alk)) are less familiar to the molecular design community than their 1-octanol/water equivalents and access to both data and prediction tools is much more limited. A method for predicting alkane/water partition coefficient from molecular structure is introduced. The basis for the ClogP(alk) model is the strong (R² = 0.987) relationship between alkane/water partition coefficient and molecular surface area (MSA) that was observed for saturated hydrocarbons. The model treats a molecule as a perturbation of a saturated hydrocarbon molecule with the same MSA and uses increments defined for functional groups to quantify the extent to which logP(alk) is perturbed by the introduction each functional group. Interactions between functional groups, such as intramolecular hydrogen bonds are also parameterized within a perturbation framework. The functional groups and interactions between them are specified substructurally in a transparent and reproducible manner using SMARTS notation. The ClogP(alk) model was parameterized using data measured for structurally prototypical compounds that dominate the literature on alkane/water partition coefficients and then validated using an external test set of 100 alkane/water logP measurements, the majority of which were for drugs.

  5. Copper-Catalyzed Intermolecular Amidation and Imidation of Unactivated Alkanes

    PubMed Central

    2015-01-01

    We report a set of rare copper-catalyzed reactions of alkanes with simple amides, sulfonamides, and imides (i.e., benzamides, tosylamides, carbamates, and phthalimide) to form the corresponding N-alkyl products. The reactions lead to functionalization at secondary C–H bonds over tertiary C–H bonds and even occur at primary C–H bonds. [(phen)Cu(phth)] (1-phth) and [(phen)Cu(phth)2] (1-phth2), which are potential intermediates in the reaction, have been isolated and fully characterized. The stoichiometric reactions of 1-phth and 1-phth2 with alkanes, alkyl radicals, and radical probes were investigated to elucidate the mechanism of the amidation. The catalytic and stoichiometric reactions require both copper and tBuOOtBu for the generation of N-alkyl product. Neither 1-phth nor 1-phth2 reacted with excess cyclohexane at 100 °C without tBuOOtBu. However, the reactions of 1-phth and 1-phth2 with tBuOOtBu afforded N-cyclohexylphthalimide (Cy-phth), N-methylphthalimide, and tert-butoxycyclohexane (Cy-OtBu) in approximate ratios of 70:20:30, respectively. Reactions with radical traps support the intermediacy of a tert-butoxy radical, which forms an alkyl radical intermediate. The intermediacy of an alkyl radical was evidenced by the catalytic reaction of cyclohexane with benzamide in the presence of CBr4, which formed exclusively bromocyclohexane. Furthermore, stoichiometric reactions of [(phen)Cu(phth)2] with tBuOOtBu and (Ph(Me)2CO)2 at 100 °C without cyclohexane afforded N-methylphthalimide (Me-phth) from β-Me scission of the alkoxy radicals to form a methyl radical. Separate reactions of cyclohexane and d12-cyclohexane with benzamide showed that the turnover-limiting step in the catalytic reaction is the C–H cleavage of cyclohexane by a tert-butoxy radical. These mechanistic data imply that the tert-butoxy radical reacts with the C–H bonds of alkanes, and the subsequent alkyl radical combines with 1-phth2 to form the corresponding N-alkyl imide product

  6. An ESR and NMR study of the radiolysis of n-alkanes: Crystal structure dependence

    NASA Astrophysics Data System (ADS)

    Toriyama, K.; Okazaki, M.; Nunome, K.; Matsuura, K.

    The process of radiation damage for long-chain n-alkanes was investigated to elucidate that for polyethylene. Chain-end alkyl radicals were preferentially formed not only through primary C-H scission but also through a hydrogen atom reaction in odd- n-alkane, as was shown by analysis of the ESR spectra for isotopic mixtures of tridecane- h28/tridecane- d28 and nonadecane- h40/nonadecane- d40. To elucidate the mode of alkyl radical migration in solids through intermolecular hydrogen atom abstraction, D/H exchange was detected in mixed crystals of eicosane- d42/eicosane- h42. The chain-end region was found to be more reactive than the inner region for radical site migration. In addition, formation of a microscopic amorphous island by destruction of the crystal lattice was also detected. The influences of molecular packing were large in all cases.

  7. Solar photothermochemical alkane reverse combustion

    PubMed Central

    Chanmanee, Wilaiwan; Islam, Mohammad Fakrul; Dennis, Brian H.; MacDonnell, Frederick M.

    2016-01-01

    A one-step, gas-phase photothermocatalytic process for the synthesis of hydrocarbons, including liquid alkanes, aromatics, and oxygenates, with carbon numbers (Cn) up to C13, from CO2 and water is demonstrated in a flow photoreactor operating at elevated temperatures (180–200 °C) and pressures (1–6 bar) using a 5% cobalt on TiO2 catalyst and under UV irradiation. A parametric study of temperature, pressure, and partial pressure ratio revealed that temperatures in excess of 160 °C are needed to obtain the higher Cn products in quantity and that the product distribution shifts toward higher Cn products with increasing pressure. In the best run so far, over 13% by mass of the products were C5+ hydrocarbons and some of these, i.e., octane, are drop-in replacements for existing liquid hydrocarbons fuels. Dioxygen was detected in yields ranging between 64% and 150%. In principle, this tandem photochemical–thermochemical process, fitted with a photocatalyst better matched to the solar spectrum, could provide a cheap and direct method to produce liquid hydrocarbons from CO2 and water via a solar process which uses concentrated sunlight for both photochemical excitation to generate high-energy intermediates and heat to drive important thermochemical carbon-chain-forming reactions. PMID:26903631

  8. Solar photothermochemical alkane reverse combustion.

    PubMed

    Chanmanee, Wilaiwan; Islam, Mohammad Fakrul; Dennis, Brian H; MacDonnell, Frederick M

    2016-03-01

    A one-step, gas-phase photothermocatalytic process for the synthesis of hydrocarbons, including liquid alkanes, aromatics, and oxygenates, with carbon numbers (Cn) up to C13, from CO2 and water is demonstrated in a flow photoreactor operating at elevated temperatures (180-200 °C) and pressures (1-6 bar) using a 5% cobalt on TiO2 catalyst and under UV irradiation. A parametric study of temperature, pressure, and partial pressure ratio revealed that temperatures in excess of 160 °C are needed to obtain the higher Cn products in quantity and that the product distribution shifts toward higher Cn products with increasing pressure. In the best run so far, over 13% by mass of the products were C5+ hydrocarbons and some of these, i.e., octane, are drop-in replacements for existing liquid hydrocarbons fuels. Dioxygen was detected in yields ranging between 64% and 150%. In principle, this tandem photochemical-thermochemical process, fitted with a photocatalyst better matched to the solar spectrum, could provide a cheap and direct method to produce liquid hydrocarbons from CO2 and water via a solar process which uses concentrated sunlight for both photochemical excitation to generate high-energy intermediates and heat to drive important thermochemical carbon-chain-forming reactions.

  9. Spontaneous reduction and C-H borylation of arenes mediated by uranium(III) disproportionation.

    PubMed

    Arnold, Polly L; Mansell, Stephen M; Maron, Laurent; McKay, David

    2012-07-15

    Transition-metal-arene complexes such as bis(benzene)chromium Cr(η(6)-C(6)H(6))(2) are historically important to d-orbital bonding theory and have modern importance in organic synthesis, catalysis and organic spintronics. In investigations of f-block chemistry, however, arenes are invariably used as solvents rather than ligands. Here, we show that simple uranium complexes UX(3) (X = aryloxide, amide) spontaneously disproportionate, transferring an electron and X-ligand, allowing the resulting UX(2) to bind and reduce arenes, forming inverse sandwich molecules [X(2)U(µ-η(6):η(6)-arene)UX(2)] and a UX(4) by-product. Calculations and kinetic studies suggest a 'cooperative small-molecule activation' mechanism involving spontaneous arene reduction as an X-ligand is transferred. These mild reaction conditions allow functionalized arenes such as arylsilanes to be incorporated. The bulky UX(3) are also inert to reagents such as boranes that would react with the traditional harsh reaction conditions, allowing the development of a new in situ arene C-H bond functionalization methodology converting C-H to C-B bonds.

  10. Spontaneous reduction and C-H borylation of arenes mediated by uranium(III) disproportionation

    NASA Astrophysics Data System (ADS)

    Arnold, Polly L.; Mansell, Stephen M.; Maron, Laurent; McKay, David

    2012-08-01

    Transition-metal-arene complexes such as bis(benzene)chromium Cr(η6-C6H6)2 are historically important to d-orbital bonding theory and have modern importance in organic synthesis, catalysis and organic spintronics. In investigations of f-block chemistry, however, arenes are invariably used as solvents rather than ligands. Here, we show that simple uranium complexes UX3 (X = aryloxide, amide) spontaneously disproportionate, transferring an electron and X-ligand, allowing the resulting UX2 to bind and reduce arenes, forming inverse sandwich molecules [X2U(µ-η6:η6-arene)UX2] and a UX4 by-product. Calculations and kinetic studies suggest a ‘cooperative small-molecule activation’ mechanism involving spontaneous arene reduction as an X-ligand is transferred. These mild reaction conditions allow functionalized arenes such as arylsilanes to be incorporated. The bulky UX3 are also inert to reagents such as boranes that would react with the traditional harsh reaction conditions, allowing the development of a new in situ arene C-H bond functionalization methodology converting C-H to C-B bonds.

  11. DFT Calculations on the Mechanism of Transition-Metal-Catalyzed Reaction of Diazo Compounds with Phenols: O-H Insertion versus C-H Insertion.

    PubMed

    Liu, Yuan; Luo, Zhoujie; Zhang, John Zenghui; Xia, Fei

    2016-08-18

    The reaction of diazo compounds with transition-metal carbenes is an efficient way to achieve the functionalization of chemical bonds in organic molecules, especially for the C-H and O-H bonds. However, the selective mechanisms of C-H and O-H bond insertions by various metal carbenes such as Rh and Cu complexes are not quite clear. In this work, we performed a comprehensively theoretical investigation of the phenol C-H and O-H bonds inserted by Rh and Cu carbenes by using DFT calculations. The calculated results reveal that the nucleophilic additions of phenols to the Rh and Cu carbenes in the C-H bond insertions are the rate-determining steps of whole reactions, which are higher than the barriers in the O-H insertions. In the process of intramolecular [1,3]-H transfer, the Rh and Cu ligands in their carbenes tend to dissociate into solution rather than the intramolecular migration due to their weak metal-carbon bonds. A deeply theoretical analysis of the electronic structures of Rh, Cu, and Au carbenes as well as their complexes elucidated their differences in the chemoselectivity of C-H and O-H insertion products, which agrees with the experimental observations well. PMID:27472439

  12. Local network structure of a-SiC:H and its correlation with dielectric function

    SciTech Connect

    Kageyama, Shota; Matsuki, Nobuyuki; Fujiwara, Hiroyuki

    2013-12-21

    The microscopic disordered structures of hydrogenated amorphous silicon carbide (a-Si{sub 1−x}C{sub x}:H) layers with different carbon contents have been determined based on the correlations between the dielectric function in the ultraviolet/visible region and the local bonding states studied by high-sensitivity infrared attenuated total reflection spectroscopy. We find that the microscopic structure of the a-Si{sub 1−x}C{sub x}:H layers fabricated by plasma-enhanced chemical vapor deposition shows a sharp structural transition at a boundary of x = 6.3 at. %. In the regime of x ≤ 6.3 at. %, (i) the amplitude of the a-SiC:H dielectric function reduces and (ii) the SiH{sub 2} content increases drastically with x, even though most of the C atoms are introduced into the tetrahedral sites without bonding with H. In the regime of x > 6.3 at. %, on the other hand, (i) the amplitude of the dielectric function reduces further and (ii) the concentration of the sp{sup 3} CH{sub n} (n = 2,3) groups increases. Moreover, we obtained the direct evidence that the sp{sup 2} C bonding state in the a-SiC matrix exists in the configuration of C = CH{sub 2} and the generation of the graphite-like C = CH{sub 2} unit suppresses the band gap widening significantly. At high C contents of x > 6.3 at. %, the a-SiC:H layers show quite porous structures due to the formation of microvoids terminated with the SiH{sub 2}/CH{sub n} groups. By taking the SiH{sub 2}/CH{sub n} microvoid generation in the network and the high-energy shift of the dielectric function by the local bonding states into account, the a-SiC:H dielectric function model has been established. From the analysis using this model, we have confirmed that the a-SiC:H optical properties in the ultraviolet/visible region are determined almost completely by the local network structures.

  13. Enantioselective C-H carbene insertions with homogeneous and immobilized copper complexes.

    PubMed

    Fraile, José M; López-Ram-de-Viu, Pilar; Mayoral, José A; Roldán, Marta; Santafé-Valero, Jorge

    2011-09-01

    The efficiency of chiral bis(oxazoline)- and azabis(oxazoline)-copper complexes in the enantioselective carbene insertion into C-H bonds of cyclic ethers in homogeneous phase strongly depends on the structure of the substrate. The immobilization on laponite clay by electrostatic interactions not only allows the recovery and reuse of the heterogeneous catalysts, but in some cases also improves enantioselectivity and overall chemoselectivity, making possible reactions that do not take place or lead to low yields in solution, even with the commonly used Rh(2)[S-DOSP](4) catalyst. PMID:21750830

  14. Structural insights into diversity and n-alkane biodegradation mechanisms of alkane hydroxylases

    PubMed Central

    Ji, Yurui; Mao, Guannan; Wang, Yingying; Bartlam, Mark

    2013-01-01

    Environmental microbes utilize four degradation pathways for the oxidation of n-alkanes. Although the enzymes degrading n-alkanes in different microbes may vary, enzymes functioning in the first step in the aerobic degradation of alkanes all belong to the alkane hydroxylases. Alkane hydroxylases are a class of enzymes that insert oxygen atoms derived from molecular oxygen into different sites of the alkane terminus (or termini) depending on the type of enzymes. In this review, we summarize the different types of alkane hydroxylases, their degrading steps, and compare typical enzymes from various classes with regard to their three-dimensional structures, in order to provide insights into how the enzymes mediate their different roles in the degradation of n-alkanes and what determines their different substrate ranges. Through the above analyzes, the degrading mechanisms of enzymes can be elucidated and molecular biological methods can be utilized to expand their catalytic roles in the petrochemical industry or in bioremediation of oil-contaminated environments. PMID:23519435

  15. The dimers of glyoxal and acrolein with H 2O and HF: Negative intramolecular coupling and blue-shifted C-H stretch

    NASA Astrophysics Data System (ADS)

    Karpfen, Alfred; Kryachko, Eugene S.

    2010-04-01

    The structures and the vibrational spectra of the hydrogen-bonded complexes: glyoxal-H 2O, glyoxal-HF, acrolein-H 2O, and acrolein-HF, are investigated within the MP2/aug-cc-pVTZ computational approach. It is demonstrated that the calculated blue shifts of the C-H stretching frequencies in the glyoxal-H 2O complexes are only indirectly pertinent to hydrogen bonding to the C-H group. The comparison with the glyoxal-HF and the acrolein-HF complexes reveals that these blue shifts are a direct consequence of a negative intramolecular coupling between vicinal C dbnd O and C-H bonds in the aldehyde groups of isolated glyoxal and acrolein molecules. To support this interpretation, the halogen-bonded complexes glyoxal-BrF and acrolein-BrF are discussed.

  16. Growth mechanism and composition of ultrasmooth a-C:H:Si films grown from energetic ions for superlubricity

    SciTech Connect

    Chen, Xinchun Kato, Takahisa

    2014-01-28

    Growth mechanism and ion energy dependence of composition of ultrasmooth a-C:H:Si films grown from ionization of tetramethylsilane (TMS) and toluene mixture at a fixed gas ratio have been investigated by varying the applied bias voltage. The dynamic scaling theory is employed to evaluate the roughness evolution of a-C:H:Si films, and to extract roughness and growth exponents of α ∼ 0.51 and β ∼ 0, respectively. The atomically smooth surface of a-C:H:Si films with Ra ∼ 0.1 nm is thermally activated by the energetic ion-impact induced subsurface “polishing” process for ion dominated deposition. The ion energy (bias voltage) plays a paramount role in determining the hydrogen incorporation, bonding structure and final stoichiometry of a-C:H:Si films. The hydrogen content in the films measured by ERDA gradually decreases from 36.7 to 17.3 at. % with increasing the bias voltage from 0.25 to 3.5 kV, while the carbon content in the films increases correspondingly from 52.5 to 70.1 at. %. The Si content is kept almost constant at ∼9–10 at. %. Depending on the ion-surface interactions, the bonding structure of a-C:H:Si films grown in different ion energy regions evolves from chain-developed polymer-like to cross-linked diamond-like to sp{sup 2}-bonded a–C as revealed by XPS, Raman, and FTIR analysis. Such a structural evolution is reflected in their measured nanomechanical properties such as hardness, modulus, and compressive stress. An enhanced viscoplastic behavior (i.e., viscoplastic exponent of ∼0.06) is observed for polymeric a-C:H:Si films. A hydrogen content threshold (H > 20 at. %) exists for the as-grown a-C:H:Si films to exhibit superlow friction in dry N{sub 2} atmosphere. An extremely low friction coefficient of ∼0.001 can be obtained for polymer-like a-C:H:Si film. These near-frictionless a-C:H:Si films are strongly promising for applications in industrial lubricating systems.

  17. Vibrationally mediated photodissociation of ethene isotopic variants preexcited to the fourth C-H stretch overtone

    NASA Astrophysics Data System (ADS)

    Bespechansky, Evgeny; Portnov, Alexander; Zwielly, Amir; Rosenwaks, Salman; Bar, Ilana

    2006-10-01

    H and D photofragments produced via vibrationally mediated photodissociation of jet-cooled normal ethene (C2H4), 1,2-trans-d2-ethene (HDCCDH), and 1,1-d2-ethene (CH2CD2), initially excited to the fourth C-H stretch overtone region, were studied for the first time. H and D vibrational action spectra and Doppler profiles were measured. The action spectra include partially resolved features due to rotational cooling, while the monitored room temperature photoacoustic spectra exhibit only a very broad feature in each species. Simulation of the spectral contours allowed determination of the band types and origins, limited precision rotational constants, and linewidths, providing time scales for energy redistribution. The H and D Doppler profiles correspond to low average translational energies and show slight preferential C-H over C-D bond cleavage in the deuterated variants. The propensities toward H photofragments emerge even though the energy flow out of the initially prepared C-H stretch is on a picosecond time scale and the photodissociation occurs following internal conversion, indicating a more effective release of the light H atoms.

  18. The hydrodeoxygenation of bioderived furans into alkanes

    NASA Astrophysics Data System (ADS)

    Sutton, Andrew D.; Waldie, Fraser D.; Wu, Ruilian; Schlaf, Marcel; ‘Pete' Silks, Louis A.; Gordon, John C.

    2013-05-01

    The conversion of biomass into fuels and chemical feedstocks is one part of a drive to reduce the world's dependence on crude oil. For transportation fuels in particular, wholesale replacement of a fuel is logistically problematic, not least because of the infrastructure that is already in place. Here, we describe the catalytic defunctionalization of a series of biomass-derived molecules to provide linear alkanes suitable for use as transportation fuels. These biomass-derived molecules contain a variety of functional groups, including olefins, furan rings and carbonyl groups. We describe the removal of these in either a stepwise process or a one-pot process using common reagents and catalysts under mild reaction conditions to provide n-alkanes in good yields and with high selectivities. Our general synthetic approach is applicable to a range of precursors with different carbon content (chain length). This allows the selective generation of linear alkanes with carbon chain lengths between eight and sixteen carbons.

  19. The hydrodeoxygenation of bioderived furans into alkanes.

    PubMed

    Sutton, Andrew D; Waldie, Fraser D; Wu, Ruilian; Schlaf, Marcel; Silks, Louis A Pete; Gordon, John C

    2013-05-01

    The conversion of biomass into fuels and chemical feedstocks is one part of a drive to reduce the world's dependence on crude oil. For transportation fuels in particular, wholesale replacement of a fuel is logistically problematic, not least because of the infrastructure that is already in place. Here, we describe the catalytic defunctionalization of a series of biomass-derived molecules to provide linear alkanes suitable for use as transportation fuels. These biomass-derived molecules contain a variety of functional groups, including olefins, furan rings and carbonyl groups. We describe the removal of these in either a stepwise process or a one-pot process using common reagents and catalysts under mild reaction conditions to provide n-alkanes in good yields and with high selectivities. Our general synthetic approach is applicable to a range of precursors with different carbon content (chain length). This allows the selective generation of linear alkanes with carbon chain lengths between eight and sixteen carbons. PMID:23609095

  20. The Effect of Nano Confinement on the C-H Activation and its Corresponding Structure-Activity Relationship

    NASA Astrophysics Data System (ADS)

    Shao, Jing; Yuan, Linghua; Hu, Xingbang; Wu, Youting; Zhang, Zhibing

    2014-11-01

    The C-H activation of methane, ethane, and t-butane on inner and outer surfaces of nitrogen-doped carbon nanotube (NCNTs) are investigated using density functional theory. It includes NCNTs with different diameters, different N and O concentrations, and different types (armchair and zigzag). A universal structure-reactivity relationship is proposed to characterize the C-H activation occurring both on the inner and outer surfaces of the nano channel. The C-O bond distance, spin density and charge carried by active oxygen are found to be highly related to the C-H activation barriers. Based on these theoretical results, some useful strategies are suggested to guide the rational design of more effective catalysts by nano channel confinement.

  1. Electron cyclotron resonance deposition and plasma diagnostics of a-Si:H and a-C:H films

    NASA Technical Reports Server (NTRS)

    Shing, Y. H.

    1989-01-01

    Amorphous silicon (a-Si:H) and amorphous carbon (a-C:H) films deposited by electron cyclotron resonance (ECR) microwave plasma-enhanced chemical vapor deposition are discussed. It is shown that the ECR microwave plasma deposition technique can produce a-Si:H films with material qualities similar to and with a deposition rate one order of magnitude higher than for films deposited by radio-frequency glow discharge. The ECR-deposited a-C:H films are characterized by fluorescence, IR, and Raman spectroscopy. In situ optical emission spectroscopy plasma diagnostics indicates that ECR plasmas have a strong emission at 434 nm, which indicates a higher chemical reactivity than radio-frequency glow discharge plasmas. The radio frequency bias to the substrate is found to play a critical role in determining the film structure and the carbon bonding configuration of ECR-deposited a-C:H films.

  2. Dehydrogenation processes via C-H activation within alkylphosphines.

    PubMed

    Grellier, Mary; Sabo-Etienne, Sylviane

    2012-01-01

    Phosphines are commonly used in organometallic chemistry and are present in a wide variety of catalytic systems. This feature article highlights the advances made in dehydrogenation processes occurring within alkylphosphines, with the aim of further developing catalytic processes involving C-H activation together with potential applications in the field of hydrogen storage. PMID:21956347

  3. Reactions of FeOH/sup +/ and CoOH/sup +/ with alkanes in the gas phase

    SciTech Connect

    Cassady, C.J.; Freiser, B.S.

    1986-09-17

    The gas-phase reactions of FeOH/sup +/ and CoOH/sup +/ with aliphatic alkanes up to C/sub 6/H/sub 14/ were studied. As was the case in earlier studies on MH/sup +/ and MCH/sub 3//sup +/ (M = Fe, Co), FeOH/sup +/ is found to be less reactive than CoOH/sup +/. For aliphatic alkanes, CoOH/sup +/ reacts with species larger than ethane, while FeOH/sup +/ only reacts with branched alkanes and hexane. Following initial C-H insertion, H/sub 2/O loss dominates the FeOH/sup +/ reactions. For CoOH/sup +/, however, H/sub 2/O loss leads to an activated Co/sup +/-alkyl complex which decomposes further. In addition, dehydrogenation with no H/sub 2/O elimination also occurs in contrast to FeH/sup +/, CoH/sup +/, and CoCH/sub 3//sup +/ with alkanes, where complete loss of the initial ligand is seen. Initial C-C insertion is also a major pathway leading to M(OH)(alkene)/sup +/ species, and for FeOH/sup +/, pressure-dependent adduct formation is also observed with hexane and several branched alkanes. Both FeOH/sup +/ and CoOH/sup +/ react with cyclopropane and cyclobutane by initial C-C insertion. For cyclopentane and cyclohexane, CoOH/sup +/ reacts exclusively by C-H insertion, while FeOH/sup +/ is unreactive. As expected on the basis of thermodynamic calculations, the overall reactivity of MOH/sup +/ is intermediate to that of MH/sup +/ and MCH/sub 3//sup +/.

  4. Enzymes and genes involved in aerobic alkane degradation

    PubMed Central

    Wang, Wanpeng; Shao, Zongze

    2013-01-01

    Alkanes are major constituents of crude oil. They are also present at low concentrations in diverse non-contaminated because many living organisms produce them as chemo-attractants or as protecting agents against water loss. Alkane degradation is a widespread phenomenon in nature. The numerous microorganisms, both prokaryotic and eukaryotic, capable of utilizing alkanes as a carbon and energy source, have been isolated and characterized. This review summarizes the current knowledge of how bacteria metabolize alkanes aerobically, with a particular emphasis on the oxidation of long-chain alkanes, including factors that are responsible for chemotaxis to alkanes, transport across cell membrane of alkanes, the regulation of alkane degradation gene and initial oxidation. PMID:23755043

  5. Effects of Zeolite Structure and Si/Al Ratio on Adsorption Thermodynamics and Intrinsic Kinetics of Monomolecular Cracking and Dehydrogenation of Alkanes over Bronsted Acid Sites

    NASA Astrophysics Data System (ADS)

    Janda, Amber Leigh

    It is well known that the efficacy of acidic zeolite catalysts for the cracking of hydrocarbons originates from the shape and size of the zeolite pores. However, the mechanisms by which changes in pore structure influence cracking kinetics are not well understood or exploited. The aim of this dissertation is to use experiments and simulations to shed light on the ways by which zeolite structure and acid site location affect the apparent and intrinsic kinetics of n-alkane monomolecular cracking and dehydrogenation. In the rate-determining step of these processes, C-C or C-H bonds are cleaved catalytically by Bronsted protons. Thus, the kinetics of monomolecular activation reactions are useful for characterizing the influence of active site structural environment on catalysis. In Chapter 2, the effects of active site distribution on n-butane monomolecular activation kinetics are investigated for commercial samples of MFI having a range of the Si/Al ratio. Based on UV-visible spectroscopic analyses of (Co,Na)-MFI, it is inferred that, with increasing Al concentration, the fraction of Co---and, by extension, Bronsted protons in H-MFI---located at channel intersections increases relative to the fraction located at channels. Concurrently, the first-order rate coefficients (kapp) for cracking and dehydrogenation, the selectivity to terminal cracking versus central cracking, and the selectivity to dehydrogenation versus cracking increase. The stronger dependence of the selectivity to dehydrogenation on Al content is attributed to a product-like transition state, the stability of which is more sensitive to confinement than the stabilities of cracking transition states, which occur earlier along the reaction coordinate. For terminal cracking and dehydrogenation, the intrinsic activation entropy (DeltaS‡int ) increases with Al content, consistent with the larger dimensions of intersections relative to channels. Surprisingly, the rate of dehydrogenation is inhibited by

  6. Molecular mobility depending on chain length and thermally induced molecular motion of n-alkane/urea inclusion compounds

    NASA Astrophysics Data System (ADS)

    Nakaoki, Takahiko; Nagano, Hiromasa; Yanagida, Toshinori

    2004-08-01

    Solid-state high resolution 13C NMR was used to analyze the end group conformation and molecular mobility of n-alkanes in a urea host as a function of the carbon number of the n-alkane. It was shown that the chemical shift of the inner methylenes could be interpreted by the γ- gauche effect. Of further interest is our finding that the chemical shift of 3-methylene is independent of both chain length and temperature, a result indicating that the torsional rotation of the bond ω 3 between the 4-methylene and 5-methylene carbons is so inhibited that there is little gauche conformation. The chemical shift of the inner methylenes indicated a different tendency between the even- and the odd-numbered n-alkanes. The fact that the signals of the even-numbered n-alkanes were observed at a comparatively more upfield location than those of the odd-numbered ones indicated that the even-numbered n-alkane had a higher molecular mobility and tended to adopt a more gauche conformation. The decomposition temperature obtained by thermal analysis also suggested a difference between the even- and odd-numbered n-alkanes. The decomposition temperature of the even-numbered n-alkane/urea inclusion compounds was a little lower than that of the odd-numbered ones, a disparity corresponding to the higher molecular mobility of the n-alkane in the urea host. The spin-lattice relaxation time ( T1C) increased with increasing chain length for chains with less than the 14 carbon atoms but reached a constant value for all longer chains. This result is completely different from that for the n-alkane crystal, which gave a longer T1C depending on the chain length, and can be explained by a reduced intermolecular interaction between the n-alkane and the urea host. Clearly, T1C measurements can be applied to confirm the formation of inclusion compounds. However, the different T1C values between the methyl, 2-, 3-, and inner methylene carbons indicates that the n-alkane molecule does not rotate so fast

  7. Improved Alkane Production in Nitrogen-Fixing and Halotolerant Cyanobacteria via Abiotic Stresses and Genetic Manipulation of Alkane Synthetic Genes.

    PubMed

    Kageyama, Hakuto; Waditee-Sirisattha, Rungaroon; Sirisattha, Sophon; Tanaka, Yoshito; Mahakhant, Aparat; Takabe, Teruhiro

    2015-07-01

    Cyanobacteria possess the unique capacity to produce alkane. In this study, effects of nitrogen deficiency and salt stress on biosynthesis of alkanes were investigated in three kinds of cyanobacteria. Intracellular alkane accumulation was increased in nitrogen-fixing cyanobacterium Anabaena sp. PCC7120, but decreased in non-diazotrophic cyanobacterium Synechococcus elongatus PCC7942 and constant in a halotolerant cyanobacterium Aphanothece halophytica under nitrogen-deficient condition. We also found that salt stress increased alkane accumulation in Anabaena sp. PCC7120 and A. halophytica. The expression levels of two alkane synthetic genes were not upregulated significantly under nitrogen deficiency or salt stress in Anabaena sp. PCC7120. The transformant Anabaena sp. PCC7120 cells with additional alkane synthetic gene set from A. halophytica increased intracellular alkane accumulation level compared to control cells. These results provide a prospect to improve bioproduction of alkanes in nitrogen-fixing halotolerant cyanobacteria via abiotic stresses and genetic engineering.

  8. Palladium-catalysed directed C-H activation by anilides and ureas; water participation in a general base mechanism.

    PubMed

    Rauf, Waqar; Brown, John M

    2016-06-21

    C-H activation plays a central role in organometallic catalysis. Concerted metallation-deprotonation (CMD) has been dominant as the pathway for C-H bond cleavage. In the course of studying the mechanism of C-H activation of arylamides and arylureas with Pd complexes as part of catalytic oxidative Heck reactions, DFT calculations were carried out. The turnover-limiting C-H activation is acid-catalysed and can occur readily in the absence of acetate or other coordinating bases. The calculations simulated experiment, so that ligated sulfonate and water, both previously observed by X-ray characterization, were incorporated in the model. A Wheland-type complex between acetanilide and Pd was readily located, but the reactive C-H and the coordinated sulfonate were poorly placed for intramolecular proton transfer. Involvement of a water molecule coordinated to sulfonate provides a low-energy pathway to the palladacycle. The relative reactivity of substituted acetanilides and arylureas according to this model fits well with existing literature. General-base catalysis as described here has broader potential. PMID:27184358

  9. Iron-Catalyzed Ortho C-H Methylation of Aromatics Bearing a Simple Carbonyl Group with Methylaluminum and Tridentate Phosphine Ligand.

    PubMed

    Shang, Rui; Ilies, Laurean; Nakamura, Eiichi

    2016-08-17

    Iron-catalyzed C-H functionalization of aromatics has attracted widespread attention from chemists in recent years, while the requirement of an elaborate directing group on the substrate has so far hampered the use of simple aromatic carbonyl compounds such as benzoic acid and ketones, much reducing its synthetic utility. We describe here a combination of a mildly reactive methylaluminum reagent and a new tridentate phosphine ligand for metal catalysis, 4-(bis(2-(diphenylphosphanyl)phenyl)phosphanyl)-N,N-dimethylaniline (Me2N-TP), that allows us to convert an ortho C-H bond to a C-CH3 bond in aromatics and heteroaromatics bearing simple carbonyl groups under mild oxidative conditions. The reaction is powerful enough to methylate all four ortho C-H bonds in benzophenone. The reaction tolerates a variety of functional groups, such as boronic ester, halide, sulfide, heterocycles, and enolizable ketones.

  10. Iron-Catalyzed Ortho C-H Methylation of Aromatics Bearing a Simple Carbonyl Group with Methylaluminum and Tridentate Phosphine Ligand.

    PubMed

    Shang, Rui; Ilies, Laurean; Nakamura, Eiichi

    2016-08-17

    Iron-catalyzed C-H functionalization of aromatics has attracted widespread attention from chemists in recent years, while the requirement of an elaborate directing group on the substrate has so far hampered the use of simple aromatic carbonyl compounds such as benzoic acid and ketones, much reducing its synthetic utility. We describe here a combination of a mildly reactive methylaluminum reagent and a new tridentate phosphine ligand for metal catalysis, 4-(bis(2-(diphenylphosphanyl)phenyl)phosphanyl)-N,N-dimethylaniline (Me2N-TP), that allows us to convert an ortho C-H bond to a C-CH3 bond in aromatics and heteroaromatics bearing simple carbonyl groups under mild oxidative conditions. The reaction is powerful enough to methylate all four ortho C-H bonds in benzophenone. The reaction tolerates a variety of functional groups, such as boronic ester, halide, sulfide, heterocycles, and enolizable ketones. PMID:27487172

  11. Nitrated metalloporphyrins as catalysts for alkane oxidation

    DOEpatents

    Ellis, P.E. Jr.; Lyons, J.E.

    1994-01-18

    Compositions of matter comprising nitro-substituted metal complexes of porphyrins are catalysts for the oxidation of alkanes. The metal is iron, chromium, manganese, ruthenium, copper or cobalt. The porphyrin ring has nitro groups attached thereto in meso and/or [beta]-pyrrolic positions.

  12. Nitrated metalloporphyrins as catalysts for alkane oxidation

    DOEpatents

    Ellis, Jr., Paul E.; Lyons, James E.

    1992-01-01

    Alkanes are oxidized by contact with oxygen-containing gas in the presence as catalyst of a metalloporphyrin in which hydrogen atoms in the porphyrin ring have been replaced with one or more nitro groups. Hydrogen atoms in the porphyrin ring may also be substituted with halogen atoms.

  13. Nitrated metalloporphyrins as catalysts for alkane oxidation

    DOEpatents

    Ellis, Jr., Paul E.; Lyons, James E.

    1994-01-01

    Compositions of matter comprising nitro-substituted metal complexes of porphyrins are catalysts for the oxidation of alkanes. The metal is iron, chromium, manganese, ruthenium, copper or cobalt. The porphyrin ring has nitro groups attached thereto in meso and/or .beta.-pyrrolic positions.

  14. Accelerated Molecular Dynamics Simulation of Alkane Desorption

    NASA Astrophysics Data System (ADS)

    McLaughlin, Kelly; Fichthorn, Kristen

    2006-03-01

    Thermal desorption has been the focus of much surface science research. Studies of alkanes on graphite^1 and gold^2 have shown prefactors that are constant with alkane chain length but vary by over six orders of magnitude. Other studies on magnesium oxide^3 and gold^4 show a prefactor that increases with increasing chain length. We have developed an all-atom model to study alkane desorption from graphite. Transition state theory is used to obtain rate constants from the simulation. Accelerated MD is used to extend the desorption simulation to experimentally relevant temperatures. Our results show a prefactor that increases with increasing chain length. We predict that it will become constant as internal conformational changes occur significantly. We examine the effect of desorption environment through varying the alkane surface coverage. 1. K.R. Paserba and A.J. Gellman, J. Chem. Phys. 115, 6737 (2001). 2. S.M. Wetterer et al., J. Phys. Chem. 102, 9266 (1998). 3. S.L. Tait et al., J. Chem. Phys. 122, 164707 (2005). 4. K.A. Fichthorn and R.A. Miron, Phys. Rev. Lett. 89, 196103 (2002).

  15. Copper catalyzed oxidative ortho-C-H benzoxylation of 2-phenylpyridines with benzyl alcohols and benzyl amines as benzoxylation sources.

    PubMed

    Khemnar, Ashok B; Bhanage, Bhalchandra M

    2014-12-21

    A simple and efficient protocol for the oxidative ortho benzoxylation of 2-phenylpyridines with benzyl alcohols and benzyl amines via C-H bond activation has been developed. The present protocol uses benzyl alcohol and benzyl amine as inexpensive and easily available starting materials to afford benzoxylation products in moderate to good yields in the presence of the Cu/TBHP catalytic system. PMID:25341003

  16. Carbon stars with alpha-C:H emission

    NASA Technical Reports Server (NTRS)

    Gerbault, Florence; Goebel, John H.

    1989-01-01

    Many carbon stars in the IRS low resolution spectra (LRS) catalog were found which display emission spectra that compare favorable with the absorption spectrum of alpha-C:H. These stars have largely been classified as 4X in the LRS which has led to their interpretation by others in terms of displaying a mixture of the UIRF's 8.6 micron band and SiC at 11.5 microns. It was also found that many of these stars have a spectral upturn at 20+ microns which resembles the MgS band seen in carbon stars and planetary nebulae. It was concluded that this group of carbon stars will evolve into planetary nebulae like NGC 7027 and IC 418. In the presence of hard ultraviolet radiation the UIRF's will light up and be displayed as narrow emission bands on top of the broad alpha-C:H emission bands.

  17. Enantioselective Intramolecular Hydroarylation of Alkenes via Directed C-H Bond Activation

    SciTech Connect

    Harada, Hitoshi; Thalji, Reema; Bergman, Robert; Ellman, Jonathan

    2008-05-22

    Highly enantioselective catalytic intramolecular ortho-alkylation of aromatic imines containing alkenyl groups tethered at the meta position relative to the imine directing group has been achieved using [RhCl(coe){sub 2}]{sub 2} and chiral phosphoramidite ligands. Cyclization of substrates containing 1,1- and 1,2-disubstituted as well as trisubstituted alkenes were achieved with enantioselectivities >90% ee for each substrate class. Cyclization of substrates with Z-alkene isomers proceeded much more efficiently than substrates with E-alkene isomers. This further enabled the highly stereoselective intramolecular alkylation of certain substrates containing Z/E-alkene mixtures via a Rh-catalyzed alkene isomerization with preferential cyclization of the Z-isomer.

  18. Acidic C-H Bond as a Proton Donor in Excited State Intramolecular Proton Transfer Reactions.

    PubMed

    Stasyuk, Anton J; Cyrański, Michał K; Gryko, Daniel T; Solà, Miquel

    2015-03-10

    An unprecedented type of excited state intramolecular proton transfer in a series of benzo[h]quinoline (BHQ) derivatives substituted at position 10 with strong CH acid character is described using density functional theory/time-dependent density functional theory computational approaches with a hybrid functional and the 6-311++G(d,p) triple-ξ quality basis set. Our results show that for 10-malononitrile-substituted BHQ (2CNBHQ) the excited state intramolecular proton transfer C-H···N reaction is a barrierless process. Calculations also reveal that the reaction profiles of the 4-amino-substituted 2CNBHQ show a large dependence on the polarity of the environment. PMID:26579756

  19. Remote Oxidation of Aliphatic C-H Bonds in Nitrogen-Containing Molecules.

    PubMed

    Howell, Jennifer M; Feng, Kaibo; Clark, Joseph R; Trzepkowski, Louis J; White, M Christina

    2015-11-25

    Nitrogen heterocycles are ubiquitous in natural products and pharmaceuticals. Herein, we disclose a nitrogen complexation strategy that employs a strong Brønsted acid (HBF4) or an azaphilic Lewis acid (BF3) to enable remote, non-directed C(sp(3))-H oxidations of tertiary, secondary, and primary amine- and pyridine-containing molecules with tunable iron catalysts. Imides resist oxidation and promote remote functionalization. PMID:26536374

  20. A meta-selective copper-catalyzed C-H bond arylation.

    PubMed

    Phipps, Robert J; Gaunt, Matthew J

    2009-03-20

    For over a century, chemical transformations of benzene derivatives have been guided by the high selectivity for electrophilic attack at the ortho/para positions in electron-rich substrates and at the meta position in electron-deficient molecules. We have developed a copper-catalyzed arylation reaction that, in contrast, selectively substitutes phenyl electrophiles at the aromatic carbon-hydrogen sites meta to an amido substituent. This previously elusive class of transformation is applicable to a broad range of aromatic compounds. PMID:19299616

  1. C...H...N Hydrogen Bond Formation in Trimethylamine Dimer upon One-Photon Ionization

    NASA Astrophysics Data System (ADS)

    Nakayama, Yuichiro; Matsuda, Yoshiyuki; Fujii, Asuka

    2011-06-01

    Structures of trimethylamine dimer cluster cations which are generated by the vacuum-ultraviolet photoionization are investigated by a combination of infrared spectroscopic methods and theoretical reaction-pass calculations. In the trimethylamine dimer cluster cation, a proton of a methyl group is shared with the N atom of the other trimethylamine moiety. This is evidence that the methyl group acts as a proton donor in the cation state.

  2. Synthesis of arylated perylene bisimides through C-H bond cleavage under ruthenium catalysis.

    PubMed

    Nakazono, Satomi; Easwaramoorthi, Shanmugam; Kim, Dongho; Shinokubo, Hiroshi; Osuka, Atsuhiro

    2009-12-01

    Treatment of perylene bisimide (PBI) with various arylboronates in the presence of a ruthenium catalyst provides tetraarylated PBIs at 2,5,8,11-positions in good yields with perfect regioselectivity. The electronic nature of the introduced aryl substituents has a significant impact on their optical and electronic properties. This protocol has been applied to the synthesis of a water-soluble emissive PBI derivative.

  3. Interplay of Tunneling, Two-State Reactivity, and Bell-Evans-Polanyi Effects in C-H Activation by Nonheme Fe(IV)O Oxidants.

    PubMed

    Mandal, Debasish; Shaik, Sason

    2016-02-24

    The study of C-H bond activation reactions by nonheme Fe(IV)O species with nine hydrocarbons shows that the kinetic isotope effect (KIE) involves strong tunneling and is a signature of the reactive spin states. Theory reproduces the observed spike-like appearance of plots of KIE(exp) against the C-H bond dissociation energy, and its origins are discussed. The experimentally observed Bell-Evans-Polanyi correlations, in the presence of strong tunneling, are reproduced, and the pattern is rationalized. PMID:26824716

  4. Interplay of Tunneling, Two-State Reactivity, and Bell-Evans-Polanyi Effects in C-H Activation by Nonheme Fe(IV)O Oxidants.

    PubMed

    Mandal, Debasish; Shaik, Sason

    2016-02-24

    The study of C-H bond activation reactions by nonheme Fe(IV)O species with nine hydrocarbons shows that the kinetic isotope effect (KIE) involves strong tunneling and is a signature of the reactive spin states. Theory reproduces the observed spike-like appearance of plots of KIE(exp) against the C-H bond dissociation energy, and its origins are discussed. The experimentally observed Bell-Evans-Polanyi correlations, in the presence of strong tunneling, are reproduced, and the pattern is rationalized.

  5. The origin of alkanes found in human skin surface lipids

    SciTech Connect

    Bortz, J.T.; Wertz, P.W.; Downing, D.T. )

    1989-12-01

    Lipids extracted from human skin contain variable amounts of paraffin hydrocarbons. Although the composition of these alkanes strongly resembles petroleum waxes, it has been proposed that they are biosynthetic products of human skin. To investigate this question, skin surface lipids from 15 normal subjects were analyzed for the amount and composition of alkanes, using quantitative thin-layer chromatography and quartz capillary gas chromatography. The alkanes were found to constitute 0.5% to 1.7% of the skin lipids. Subjects differed greatly in the chain length distribution of their alkanes between 15 and 35 carbon atoms, and in the relative amounts of normal alkanes (like those in petroleum waxes) and branched chain alkanes (like those in petroleum lubricating oils). In 6 subjects, the alkane content of cerumen from each ear was examined to investigate whether alkanes arrive at the skin surface by a systemic route or by direct contact with environmental surfaces. No trace of alkanes was found in 11 of the 12 cerumen samples. Using a tandem accelerator mass spectrometer for carbon-14 dating, a combined sample of the skin surface alkanes was found to have a theoretical age of 30,950 years, similar to that of a sample of petrolatum. These analyses indicate that the alkanes found on the surface of human skin are mixtures of a variety of petroleum distillation fractions that are acquired by direct contamination from the environment.

  6. Direct C-H Trifluoromethylation of Glycals by Photoredox Catalysis.

    PubMed

    Wang, Bang; Xiong, De-Cai; Ye, Xin-Shan

    2015-11-20

    A mild, efficient, and practical transformation for the direct C-H trifluoromethylation of glycals under visible light has been reported for the first time. This reaction employed fac-Ir(3+)(ppy)3 as the photocatalyst, Umemoto's reagent as the CF3 source, and a household blue LED or sunlight as the light source. Glycals bearing both electron-withdrawing and -donating protective groups performed this reaction smoothly. This visible light-mediated trifluoromethylation reaction was highlighted by the trifluoromethylation of the biologically important Neu2en moiety. PMID:26562610

  7. Role of Cysteine Residues in the Structure, Stability, and Alkane Producing Activity of Cyanobacterial Aldehyde Deformylating Oxygenase

    PubMed Central

    Hayashi, Yuuki; Yasugi, Fumitaka; Arai, Munehito

    2015-01-01

    Aldehyde deformylating oxygenase (AD) is a key enzyme for alkane biosynthesis in cyanobacteria, and it can be used as a catalyst for alkane production in vitro and in vivo. However, three free Cys residues in AD may impair its catalytic activity by undesired disulfide bond formation and oxidation. To develop Cys-deficient mutants of AD, we examined the roles of the Cys residues in the structure, stability, and alkane producing activity of AD from Nostoc punctiforme PCC 73102 by systematic Cys-to-Ala/Ser mutagenesis. The C71A/S mutations reduced the hydrocarbon producing activity of AD and facilitated the formation of a dimer, indicating that the conserved Cys71, which is located in close proximity to the substrate-binding site, plays crucial roles in maintaining the activity, structure, and stability of AD. On the other hand, mutations at Cys107 and Cys117 did not affect the hydrocarbon producing activity of AD. Therefore, we propose that the C107A/C117A double mutant is preferable to wild type AD for alkane production and that the double mutant may be used as a pseudo-wild type protein for further improvement of the alkane producing activity of AD. PMID:25837679

  8. Role of cysteine residues in the structure, stability, and alkane producing activity of cyanobacterial aldehyde deformylating oxygenase.

    PubMed

    Hayashi, Yuuki; Yasugi, Fumitaka; Arai, Munehito

    2015-01-01

    Aldehyde deformylating oxygenase (AD) is a key enzyme for alkane biosynthesis in cyanobacteria, and it can be used as a catalyst for alkane production in vitro and in vivo. However, three free Cys residues in AD may impair its catalytic activity by undesired disulfide bond formation and oxidation. To develop Cys-deficient mutants of AD, we examined the roles of the Cys residues in the structure, stability, and alkane producing activity of AD from Nostoc punctiforme PCC 73102 by systematic Cys-to-Ala/Ser mutagenesis. The C71A/S mutations reduced the hydrocarbon producing activity of AD and facilitated the formation of a dimer, indicating that the conserved Cys71, which is located in close proximity to the substrate-binding site, plays crucial roles in maintaining the activity, structure, and stability of AD. On the other hand, mutations at Cys107 and Cys117 did not affect the hydrocarbon producing activity of AD. Therefore, we propose that the C107A/C117A double mutant is preferable to wild type AD for alkane production and that the double mutant may be used as a pseudo-wild type protein for further improvement of the alkane producing activity of AD.

  9. Oxidative dehydrogenation of alkanes to unsaturated hydrocarbons

    DOEpatents

    Kung, Harold H.; Chaar, Mohamed A.

    1988-01-01

    Oxidative dehydrogenation of alkanes to unsaturated hydrocarbons is carried out over metal vanadate catalysts under oxidizing conditions. The vanadate catalysts are represented by the formulas M.sub.3 (VO.sub.4).sub.2 and MV.sub.2 O.sub.6, M representing Mg, Zn, Ca, Pb, or Cd. The reaction is carried out in the presence of oxygen, but the formation of oxygenate by-products is suppressed.

  10. Oxidative dehydrogenation of alkanes to unsaturated hydrocarbons

    DOEpatents

    Kung, H.H.; Chaar, M.A.

    1988-10-11

    Oxidative dehydrogenation of alkanes to unsaturated hydrocarbons is carried out over metal vanadate catalysts under oxidizing conditions. The vanadate catalysts are represented by the formulas M[sub 3](VO[sub 4])[sub 2] and MV[sub 2]O[sub 6], M representing Mg, Zn, Ca, Pb, or Cd. The reaction is carried out in the presence of oxygen, but the formation of oxygenate by-products is suppressed.

  11. Alkane metathesis by tandem alkane-dehydrogenation-olefin-metathesis catalysis and related chemistry.

    PubMed

    Haibach, Michael C; Kundu, Sabuj; Brookhart, Maurice; Goldman, Alan S

    2012-06-19

    Methods for the conversion of both renewable and non-petroleum fossil carbon sources to transportation fuels that are both efficient and economically viable could greatly enhance global security and prosperity. Currently, the major route to convert natural gas and coal to liquids is Fischer-Tropsch catalysis, which is potentially applicable to any source of synthesis gas including biomass and nonconventional fossil carbon sources. The major desired products of Fischer-Tropsch catalysis are n-alkanes that contain 9-19 carbons; they comprise a clean-burning and high combustion quality diesel, jet, and marine fuel. However, Fischer-Tropsch catalysis also results in significant yields of the much less valuable C(3) to C(8)n-alkanes; these are also present in large quantities in oil and gas reserves (natural gas liquids) and can be produced from the direct reduction of carbohydrates. Therefore, methods that could disproportionate medium-weight (C(3)-C(8)) n-alkanes into heavy and light n-alkanes offer great potential value as global demand for fuel increases and petroleum reserves decrease. This Account describes systems that we have developed for alkane metathesis based on the tandem operation of catalysts for alkane dehydrogenation and olefin metathesis. As dehydrogenation catalysts, we used pincer-ligated iridium complexes, and we initially investigated Schrock-type Mo or W alkylidene complexes as olefin metathesis catalysts. The interoperability of the catalysts typically represents a major challenge in tandem catalysis. In our systems, the rate of alkane dehydrogenation generally limits the overall reaction rate, whereas the lifetime of the alkylidene complexes at the relatively high temperatures required to obtain practical dehydrogenation rates (ca. 125 -200 °C) limits the total turnover numbers. Accordingly, we have focused on the development and use of more active dehydrogenation catalysts and more stable olefin-metathesis catalysts. We have used thermally

  12. Catalytic C-H imidation of aromatic cores of functional molecules: ligand-accelerated Cu catalysis and application to materials- and biology-oriented aromatics.

    PubMed

    Kawakami, Takahiro; Murakami, Kei; Itami, Kenichiro

    2015-02-25

    Versatile imidation of aromatic C-H bonds was accomplished. In the presence of copper bromide and 6,6'-dimethyl-2,2'-bipyridyl, a range of aromatics, such as polycyclic aromatic hydrocarbons, aromatic bowls, porphyrins, heteroaromatics, and natural products, can be imidated by N-fluorobenzenesulfonimide. A dramatic ligand-accelerated copper catalysis and an interesting kinetic profile were uncovered.

  13. Ru(II)-Catalyzed C-H Activation: Amide-Directed 1,4-Addition of the Ortho C-H Bond to Maleimides.

    PubMed

    Keshri, Puspam; Bettadapur, Kiran R; Lanke, Veeranjaneyulu; Prabhu, Kandikere Ramaiah

    2016-07-15

    Maleimide has been used as a selective coupling partner to generate conjugate addition products exclusively. The typical Heck-type oxidative coupling that occurs when alkenes are used is avoided by choosing maleimide as an alkene, which cannot undergo β-hydride elimination due to the unavailability of a syn-periplanar β-hydrogen atom. The amide nitrogen, which is notorious for undergoing tandem reactions to generate spirocyclic or annulation products under cross-coupling conditions, remains innocent in this report. Along with the substrate scope, a robustness screen has been performed to analyze the performance of amide as a directing group in the presence of other directing groups and also to examine the tolerance of the reaction conditions for other frequently encountered functional groups. PMID:27314834

  14. Calculations concerning the reaction C + H3+ --> CH(+) + H2.

    PubMed

    Talbi, D; DeFrees, D J; Egolf, D A; Herbst, E

    1991-06-10

    The ion-molecule reaction C + H3+ --> CH(+) + H2 has not been studied in the laboratory but is thought to be important in the gas phase synthesis of organic molecules in dense interstellar clouds. We have studied this reaction theoretically by performing quantum chemical ab initio calculations on the potential surface. We find that there is no activation barrier to the reaction and that it proceeds smoothly to the first excited electronic state of CH+. The rate coefficient as a function of temperature can then be estimated using the proper long-range potentials. The rate coefficient at 10 K is calculated to be 2.9 x 10(-9) cm3 s-1.

  15. Hydrostatic Pressure Studies Distinguish Global from Local Protein Motions in C-H Activation by Soybean Lipoxygenase-1.

    PubMed

    Hu, Shenshen; Cattin-Ortolá, Jérôme; Munos, Jeffrey W; Klinman, Judith P

    2016-08-01

    The proposed contributions of distinct classes of local versus global protein motions during enzymatic bond making/breaking processes has been difficult to verify. We employed soybean lipoxygenase-1 as a model system to investigate the impact of high pressure at variable temperatures on the hydrogen-tunneling properties of the wild-type protein and three single-site mutants. For all variants, pressure dramatically elevates the enthalpies of activation for the C-H activation. In contrast, the primary kinetic isotope effects (KIEs) for C-H activation and their corresponding temperature dependencies remain unchanged up to ca. 700 bar. The differential impact of elevated hydrostatic pressure on the temperature dependencies of rate constants versus substrate KIEs provides direct evidence for two distinct classes of protein motions: local, isotope-dependent donor-acceptor distance-sampling modes, and a more global, isotope-independent search for productive protein conformational sub-states. PMID:27348724

  16. Thermal Dehydrogenation of Base-Stabilized B2H5(+) Complexes and Its Role in C-H Borylation.

    PubMed

    Prokofjevs, Aleksandrs

    2015-11-01

    Thermally induced dehydrogenation of the H-bridged cation L2B2H5(+) (L=Lewis base) is proposed to be the key step in the intramolecular C-H borylation of tertiary amine boranes activated with catalytic amounts of strong "hydridophiles". Loss of H2 from L2B2H5(+) generates the highly reactive cation L2B2H3(+), which in its sp(2)-sp(3) diborane(4) form then undergoes either an intramolecular C-H insertion with B-B bond cleavage, or captures BH3 to produce L2B3H6(+). The effect of the counterion stability on the outcome of the reaction is illustrated by formation of LBH2C6F5 complexes through disproportionation of L2B2H5(+) HB(C6F5)3(-) . PMID:26377358

  17. Haemocompatibility of hydrogenated amorphous carbon (a-C:H) films synthesized by plasma immersion ion implantation-deposition

    NASA Astrophysics Data System (ADS)

    Yang, P.; Kwok, S. C. H.; Chu, P. K.; Leng, Y. X.; Chen, J. Y.; Wang, J.; Huang, N.

    2003-05-01

    Diamond-like-carbon has attracted much attention recently as a potential biomaterial in blood contacting biomedical devices. However, previous reports in this area have not adequately addressed the biocompatibility and acceptability of the materials in blood contacting applications. In this study, hydrogenated amorphous carbon (a-C:H) films were fabricated on silicon wafers (1 0 0) using plasma immersion ion implantation-deposition. A series of a-C:H films with different structures and chemical bonds were fabricated under different substrate voltages. The results indicate that film graphitization is promoted at higher substrate bias. The film deposited at a lower substrate bias of -75 V possesses better blood compatibility than the films at higher bias and stainless steel. Our results suggest two possible paths to improve the blood compatibility, suppression of the endogenic clotting system and reduction of platelet activation.

  18. Two-State Reactivity in Low-Valent Iron-Mediated C-H Activation and the Implications for Other First-Row Transition Metals.

    PubMed

    Sun, Yihua; Tang, Hao; Chen, Kejuan; Hu, Lianrui; Yao, Jiannian; Shaik, Sason; Chen, Hui

    2016-03-23

    C-H bond activation/functionalization promoted by low-valent iron complexes has recently emerged as a promising approach for the utilization of earth-abundant first-row transition metals to carry out this difficult transformation. Herein we use extensive density functional theory and high-level ab initio coupled cluster calculations to shed light on the mechanism of these intriguing reactions. Our key mechanistic discovery for C-H arylation reactions reveals a two-state reactivity (TSR) scenario in which the low-spin Fe(II) singlet state, which is initially an excited state, crosses over the high-spin ground state and promotes C-H bond cleavage. Subsequently, aryl transmetalation occurs, followed by oxidation of Fe(II) to Fe(III) in a single-electron transfer (SET) step in which dichloroalkane serves as an oxidant, thus promoting the final C-C coupling and finalizing the C-H functionalization. Regeneration of the Fe(II) catalyst for the next round of C-H activation involves SET oxidation of the Fe(I) species generated after the C-C bond coupling. The ligand sphere of iron is found to play a crucial role in the TSR mechanism by stabilization of the reactive low-spin state that mediates the C-H activation. This is the first time that the successful TSR concept conceived for high-valent iron chemistry is shown to successfully rationalize the reactivity for a reaction promoted by low-valent iron complexes. A comparative study involving other divalent middle and late first-row transition metals implicates iron as the optimum metal in this TSR mechanism for C-H activation. It is predicted that stabilization of low-spin Mn(II) using an appropriate ligand sphere should produce another promising candidate for efficient C-H bond activation. This new TSR scenario therefore emerges as a new strategy for using low-valent first-row transition metals for C-H activation reactions. PMID:26907535

  19. Two-State Reactivity in Low-Valent Iron-Mediated C-H Activation and the Implications for Other First-Row Transition Metals.

    PubMed

    Sun, Yihua; Tang, Hao; Chen, Kejuan; Hu, Lianrui; Yao, Jiannian; Shaik, Sason; Chen, Hui

    2016-03-23

    C-H bond activation/functionalization promoted by low-valent iron complexes has recently emerged as a promising approach for the utilization of earth-abundant first-row transition metals to carry out this difficult transformation. Herein we use extensive density functional theory and high-level ab initio coupled cluster calculations to shed light on the mechanism of these intriguing reactions. Our key mechanistic discovery for C-H arylation reactions reveals a two-state reactivity (TSR) scenario in which the low-spin Fe(II) singlet state, which is initially an excited state, crosses over the high-spin ground state and promotes C-H bond cleavage. Subsequently, aryl transmetalation occurs, followed by oxidation of Fe(II) to Fe(III) in a single-electron transfer (SET) step in which dichloroalkane serves as an oxidant, thus promoting the final C-C coupling and finalizing the C-H functionalization. Regeneration of the Fe(II) catalyst for the next round of C-H activation involves SET oxidation of the Fe(I) species generated after the C-C bond coupling. The ligand sphere of iron is found to play a crucial role in the TSR mechanism by stabilization of the reactive low-spin state that mediates the C-H activation. This is the first time that the successful TSR concept conceived for high-valent iron chemistry is shown to successfully rationalize the reactivity for a reaction promoted by low-valent iron complexes. A comparative study involving other divalent middle and late first-row transition metals implicates iron as the optimum metal in this TSR mechanism for C-H activation. It is predicted that stabilization of low-spin Mn(II) using an appropriate ligand sphere should produce another promising candidate for efficient C-H bond activation. This new TSR scenario therefore emerges as a new strategy for using low-valent first-row transition metals for C-H activation reactions.

  20. Synthesis of a highly reactive (benzyne)ruthenium complex: C-C, C-H, N-H, and O-H activation reactions

    SciTech Connect

    Hartwig, J.F.; Andersen, R.A.; Bergman, R.G. )

    1989-03-29

    The authors report here the synthesis and chemistry of an exceptionally reactive ruthenium benzyne complex, (PMe{sub 3}){sub 4}Ru({eta}{sup 2}-C{sub 6}H{sub 4}) (1). The ruthenium-carbon bond in this molecule reacts with a wide range of organic substrates that are typically inert toward late transition-metal-carbon bonds, including those in benzyne complexes. For example, complex 1 reacts cleanly with arylamine N-H bonds, water O-H bonds, and benzyl and aryl C-H bonds. It reacts with acetophenone to yield an O-bound enolate complex, inserts benzaldehyde cleanly, and cleaves the C-C bond of acetone.

  1. Catalytic conversion of light alkanes. Quarterly progress report, April 1--June 30, 1992

    SciTech Connect

    Lyons, J.E.

    1992-06-30

    The second Quarterly Report of 1992 on the Catalytic Conversion of Light Alkanes reviews the work done between April 1, 1992 and June 31, 1992 on the Cooperative Agreement. The mission of this work is to devise a new catalyst which can be used in a simple economic process to convert the light alkanes in natural gas to oxygenate products that can either be used as clean-burning, high octane liquid fuels, as fuel components or as precursors to liquid hydrocarbon uwspomdon fuel. During the past quarter we have continued to design, prepare, characterize and test novel catalysts for the mild selective reaction of light hydrocarbons with air or oxygen to produce alcohols directly. These catalysts are designed to form active metal oxo (MO) species and to be uniquely active for the homolytic cleavage of the carbon-hydrogen bonds in light alkanes producing intermediates which can form alcohols. We continue to investigate three molecular environments for the active catalytic species that we are trying to generate: electron-deficient macrocycles (PHASE I), polyoxometallates (PHASE II), and regular oxidic lattices including zeolites and related structures as well as other molecular surface structures having metal oxo groups (PHASE I).

  2. Catalytic conversion of light alkanes: Quarterly report, January 1-March 31, 1992

    SciTech Connect

    Biscardi, J.; Bowden, P.T.; Durante, V.A.; Ellis, P.E. Jr.; Gray, H.B.; Gorbey, R.G.; Hayes, R.C.; Hodge, J.; Hughes, M.; Langdale, W.A.; Lyons, J.E.; Marcus, B.; Messick, D.; Merrill, R.A.; Moore, F.A.; Myers, H.K. Jr.; Seitzer, W.H.; Shaikh, S.N.; Tsao, W.H.; Wagner, R.W.; Warren, R.W.; Wijesekera, T.P.

    1997-05-01

    The first Quarterly Report of 1992 on the Catalytic Conversion of Light Alkanes reviews the work done between January 1. 1992 and March 31, 1992 on the Cooperative Agreement. The mission of this work is to devise a new catalyst which can be used in a simple economic process to convert the light alkanes in natural gas to oxygenate products which can either be used as clean-burning, high octane liquid fuels, as fuel components or as precursors to liquid hydrocarbon transportation fuel. During the past quarter we have continued to design, prepare, characterize and test novel catalysts for the mild selective reaction of light hydrocarbons with air or oxygen to produce alcohols directly. These catalysts are designed to form active metal oxo (MO) species and to be uniquely active for the homolytic cleavage of the carbon-hydrogen bonds in light alkanes producing intermediates which can form alcohols. We continue to investigate three molecular environments for the active catalytic species that we are trying to generate: electron-deficient porphryinic macrocycles (PHASE I), polyoxometallates (PHASE II), and regular oxidic lattices including zeolites and related structures as well as other molecular surface structures having metal oxo groups (PHASE III).

  3. Catalytic conversion of light alkanes phase II. Topical report, January 1990--January 1993

    SciTech Connect

    1998-12-31

    The Topical Report on Phase II of the project entitled, Catalytic Conversion of Light Alkanes reviews work done between January 1, 1990 and September 30, 1992 on the Cooperative Agreement. The mission of this work is to devise a new catalyst which can be used in a simple economic process to convert the light alkanes in natural gas to oxygenate products which can either be used as clean-burning, high octane liquid fuels, as fuel components or as precursors to liquid hydrocarbon transportation fuel. This Topical Report documents our efforts to design, prepare, characterize and test novel catalysts for the mild selective reaction of light hydrocarbons with air or oxygen to produce alcohols directly. These catalysts are designed to form active metal oxo (MO) species and to be uniquely active for the homolytic cleavage of the carbon-hydrogen bonds in light alkanes producing intermediates which can form alcohols. Research on the Cooperative Agreement is divided into three Phases relating to three molecular environments for the active catalytic species that we are trying to generate. In this report we present our work on catalysts which have oxidation-active metals in polyoxoanions (PHASE II).

  4. Release of alkanes from sedimentary organic matter via sequential degradation involving catalytic hydropyrolysis

    SciTech Connect

    Love, G.D.; McAulay, A.; Snape, C.E.

    1996-12-31

    Fixed-bed pyrolysis of petroleum source rocks (type I and II kerogens) and high-volatile coals (type III ketogens) at high hydrogen pressures (> 10 MN, hydropyrolysis) in the presence of a dispersed sulphided molydenum catalyst gives rise to extremely high oil (dichloromethane-soluble) yields (>60%) with overall conversions of the organic matter being greater than 90%. The yields and conformations of the hopanes and steranes released from a selection of petroleum source rocks and coals by sequential dichloromethane and pyridine extraction, catalytic hydrogenation and hydropyrolysis will be presented, together with the influence of hydrogen pressure and heating rate on alkane yields and sterochemistry. The aim of the hydrogenation step (conducted at 300{degrees}C cf. 520{degrees}C for hydropyrolysis) in this sequential degradation scheme is to cleave only the weaker covalent bonds. The findings have demonstrated the unique ability of hydropyrolysis to mainline the yields of covalently-bound alkanes while maintaining the biologically-inherited 17{beta}(H), 21{beta}(H) stereochemistries of the hopanes, largely intact, even for coals. The total alkane yields from hydropyrolysis represented ca 30% w/w of the organic matter remaining in immature type I kerogens with yields of the C{sub 29}-C{sub 35} 17{beta}(H), 21{beta}(H) hopanes being much higher than from both normal pyrolysis and the hydrogenation step.

  5. Synthesis, conformational and theoretical studies of 1,n-di(2-formyl-4-phenylazophenoxy)alkanes

    NASA Astrophysics Data System (ADS)

    Balachander, R.; Manimekalai, A.

    2016-01-01

    1,n-di(2-Formyl-4-phenylazophenoxy)alkanes 1 and 2 and 1,3-di(2-formyl-4-phenylazophenoxymethyl)benzene 3 were synthesis and characterized by FT-IR, UV-Vis, 1H, 13C NMR and mass spectral studies. The stable conformations of 1-3 were predicted theoretically and selected geometrical parameters were derived from optimized structures. The molecular parameters of HOMO-LUMO energies, polarizability, hyperpolarizability, natural bond orbital (NBO), atom in molecule (AIM) analysis and molecular electrostatic potential (MEP) surfaces were determined by the density functional theory (DFT) method and analysed.

  6. C-H/π-interaction-guided self-assembly in π-conjugated oligomers.

    PubMed

    Goel, Mahima; Jayakannan, Manickam

    2012-03-01

    We report CH/π hydrogen-bond-driven self-assembly in π-conjugated skeletons based on oligophenylenevinylenes (OPVs) and trace the origin of interactions at the molecular level by using single-crystal structures. OPVs were designed with appropriate pendants in the aromatic core and varied by hydrocarbon or fluorocarbon tails along the molecular axis. The roles of aromatic π-stack, van der Waals forces, fluorophobic effect and CH/π interactions were investigated on the theromotropic liquid crystallinity of OPV molecules. Single-crystal structures of hydrocarbon OPVs provided direct evidence for the existence of CH/π interactions between the π-ring (H-bond acceptor) and alkyl C-H (H-bond donor). The four important crystallographic parameters, d(c-x)=3.79 Å, θ=21.49°, φ=150.25° and d(Hp-x)=0.73 Å, matched in accordance with typical CH/π interactions. The CH/π interactions facilitate the close-packing of mesogens in x-y planes, which were further protruded along the c axis producing a lamellar structure. In the absence of CH/π interactions, van der Waals interactions drove the assembly towards a Schlieren nematic texture. Fluorocarbon OPVs exhibited smectic liquid-crystalline textures that further underwent Smectic A (SmA) to Smectic C (SmC) phase transitions with shrinkage up to 11%. The orientation and translational ordering of mesogens in the liquid-crystalline (LC) phases induced H- and J-type molecular arrangements in fluorocarbon and hydrocarbon OPVs, respectively. Upon photoexcitation, the H- and J-type molecular arrangements were found to emit a blue or yellowish/green colour. Time-resolved fluorescence decay measurements confirmed longer lifetimes for H-type smectic OPVs relative to that of loosely packed one-dimensional nematic hydrocarbon-tailed OPVs. PMID:22298381

  7. Modeling the phase behavior of H2S+n-alkane binary mixtures using the SAFT-VR+D approach.

    PubMed

    dos Ramos, M Carolina; Goff, Kimberly D; Zhao, Honggang; McCabe, Clare

    2008-08-01

    A statistical associating fluid theory for potential of variable range has been recently developed to model dipolar fluids (SAFT-VR+D) [Zhao and McCabe, J. Chem. Phys. 2006, 125, 104504]. The SAFT-VR+D equation explicitly accounts for dipolar interactions and their effect on the thermodynamics and structure of a fluid by using the generalized mean spherical approximation (GMSA) to describe a reference fluid of dipolar square-well segments. In this work, we apply the SAFT-VR+D approach to real mixtures of dipolar fluids. In particular, we examine the high-pressure phase diagram of hydrogen sulfide+n-alkane binary mixtures. Hydrogen sulfide is modeled as an associating spherical molecule with four off-center sites to mimic hydrogen bonding and an embedded dipole moment (micro) to describe the polarity of H2S. The n-alkane molecules are modeled as spherical segments tangentially bonded together to form chains of length m, as in the original SAFT-VR approach. By using simple Lorentz-Berthelot combining rules, the theoretical predictions from the SAFT-VR+D equation are found to be in excellent overall agreement with experimental data. In particular, the theory is able to accurately describe the different types of phase behavior observed for these mixtures as the molecular weight of the alkane is varied: type III phase behavior, according to the scheme of classification by Scott and Konynenburg, for the H2S+methane system, type IIA (with the presence of azeotropy) for the H2S+ethane and+propane mixtures; and type I phase behavior for mixtures of H2S and longer n-alkanes up to n-decane. The theory is also able to predict in a qualitative manner the solubility of hydrogen sulfide in heavy n-alkanes. PMID:18630859

  8. Modeling the phase behavior of H2S+n-alkane binary mixtures using the SAFT-VR+D approach.

    PubMed

    dos Ramos, M Carolina; Goff, Kimberly D; Zhao, Honggang; McCabe, Clare

    2008-08-01

    A statistical associating fluid theory for potential of variable range has been recently developed to model dipolar fluids (SAFT-VR+D) [Zhao and McCabe, J. Chem. Phys. 2006, 125, 104504]. The SAFT-VR+D equation explicitly accounts for dipolar interactions and their effect on the thermodynamics and structure of a fluid by using the generalized mean spherical approximation (GMSA) to describe a reference fluid of dipolar square-well segments. In this work, we apply the SAFT-VR+D approach to real mixtures of dipolar fluids. In particular, we examine the high-pressure phase diagram of hydrogen sulfide+n-alkane binary mixtures. Hydrogen sulfide is modeled as an associating spherical molecule with four off-center sites to mimic hydrogen bonding and an embedded dipole moment (micro) to describe the polarity of H2S. The n-alkane molecules are modeled as spherical segments tangentially bonded together to form chains of length m, as in the original SAFT-VR approach. By using simple Lorentz-Berthelot combining rules, the theoretical predictions from the SAFT-VR+D equation are found to be in excellent overall agreement with experimental data. In particular, the theory is able to accurately describe the different types of phase behavior observed for these mixtures as the molecular weight of the alkane is varied: type III phase behavior, according to the scheme of classification by Scott and Konynenburg, for the H2S+methane system, type IIA (with the presence of azeotropy) for the H2S+ethane and+propane mixtures; and type I phase behavior for mixtures of H2S and longer n-alkanes up to n-decane. The theory is also able to predict in a qualitative manner the solubility of hydrogen sulfide in heavy n-alkanes.

  9. Intramolecular C-H activation reactions of molybdenacyclobutanes.

    PubMed

    Graham, Peter M; Buschhaus, Miriam S A; Legzdins, Peter

    2006-07-19

    Molybdenacyclobutane complexes can be prepared by reaction of Cp*Mo(NO)(=CHCMe3) (formed spontaneously by loss of neopentane from Cp*Mo(NO)(CH2CMe3)2 (1) under ambient conditions) with cyclic olefins, including cyclopentene, cycloheptene, and cyclooctene. The cyclopentene metallacyclobutane orients the metallacycle bridgehead protons cis to each other. A trans arrangement is observed for the cyclooctene congener, and both cis and trans orientations occur for the cycloheptene species. The reaction of 1 with cyclohexene initially forms a metallacyclobutane that then undergoes an allylic C-H activation to form an allyl-alkyl-coupled product with the concomitant loss of H2. The analogous allyl-alkyl structure is also observed as the thermodynamic product for the reactions of cycloheptene and cyclooctene with 1. The cyclooctene allyl-alkyl compound (5C) can be converted to an eta2-diene complex by heating with pyridine. Alternatively, heating of 5C in the presence of a variety of olefins displaces the diene ligand that can then be isolated in its unbound state.

  10. Collective Synthesis of Phenanthridinone through C-H Activation Involving a Pd-Catalyzed Aryne Multicomponent Reaction.

    PubMed

    Feng, Minghao; Tang, Bingqing; Xu, Hong-Xi; Jiang, Xuefeng

    2016-09-01

    A palladium-catalyzed multicomponent reaction (MCR) involving aryne, CO, and aniline is established for straightforward assembly of a phenanthridinone scaffold through C-H bond activation. Free combination with multiple kinds of readily available anilines and arynes is facilely achieved for phenanthridinone construction without prefunctionalization. Representative natural products were subsequently synthesized through this MCR strategy highly efficiently. Control experiments and interval NMR tracking revealed the mechanism, particularly the key role of CuF2 in determining the aryne-releasing rate from the precursor in this transformation. PMID:27529796

  11. Rapid Construction of a Benzo-Fused Indoxamycin Core Enabled by Site-Selective C-H Functionalizations.

    PubMed

    Bedell, T Aaron; Hone, Graham A B; Valette, Damien; Yu, Jin-Quan; Davies, Huw M L; Sorensen, Erik J

    2016-07-11

    Methods for functionalizing carbon-hydrogen bonds are featured in a new synthesis of the tricyclic core architecture that characterizes the indoxamycin family of secondary metabolites. A unique collaboration between three laboratories has engendered a design for synthesis featuring two sequential C-H functionalization reactions, namely a diastereoselective dirhodium carbene insertion followed by an ester-directed oxidative Heck cyclization, to rapidly assemble the congested tricyclic core of the indoxamycins. This project exemplifies how multi-laboratory collaborations can foster conceptually novel approaches to challenging problems in chemical synthesis. PMID:27206223

  12. Chelation-Assisted Nickel-Catalyzed Oxidative Annulation via Double C-H Activation/Alkyne Insertion Reaction.

    PubMed

    Misal Castro, Luis C; Obata, Atsushi; Aihara, Yoshinori; Chatani, Naoto

    2016-01-22

    A nickel/NHC system for regioselective oxidative annulation by double C-H bond activation and concomitant alkyne insertion is described. The catalytic reaction requires a bidentate directing group, such as an 8-aminoquinoline, embedded in the substrate. Various 5,6,7,8-tetrasubstituted-N-(quinolin-8-yl)-1-naphthamides can be prepared as well as phenanthrene and benzo[h]quinoline amide derivatives. Diarylalkynes, dialkylalkynes, and arylalkylalkynes can be used in the system. A Ni(0)/Ni(II) catalytic cycle is proposed as the main catalytic cycle. The alkyne plays a double role as a two-component coupling partner and as a hydrogen acceptor. PMID:26689750

  13. Thermal conductivity of liquid n-alkanes

    SciTech Connect

    Calado, J.C.G.; Fareleira, J.M.N.A.; Mardolcar, U.V.; Nieto de Castro, C.A.

    1988-05-01

    The thermal conductivity of liquids has been shown in the past to be difficult to predict with a reasonable accuracy, due to the lack of accurate experimental data and reliable prediction schemes. However, data of a high accuracy, and covering wide density ranges, obtained recently in laboratories in Boulder, Lisbon, and London with the transient hot-wire technique, can be used to revise an existing correlation scheme and to develop a new universal predictive technique for the thermal conductivity of liquid normal alkanes. The proposed correlation scheme is constructed on a theoretically based treatment of the van der Waals model of a liquid, which permits the prediction of the density dependence and the thermal conductivity of liquid n-alkanes, methane to tridecane, for temperatures between 110 and 370 K and pressures up to 0.6 MPa, i.e., for 0.3 less than or equal to T/T/sub c/ less than or equal to 0.7 and 2.4 less than or equal to rho/rho/sub c/ less than or equal to 3.7, with an accuracy of +/-1%, given a known value of the thermal conductivity of the fluid at the desired temperature. A generalization of the hard-core volumes obtained, as a function of the number of carbon atoms, showed that it was possible to predict the thermal conductivity of pentane to tetradecane +/- 2%, without the necessity of available experimental measurements.

  14. Products of Chemistry: Alkanes: Abundant, Pervasive, Important, and Essential.

    ERIC Educational Resources Information Center

    Seymour, Raymond B.

    1989-01-01

    Discusses the history and commercialization of alkanes. Examines the nomenclature and uses of alkanes. Studies polymerization and several types of polyethylenes: low-density, high-density, low-molecular-weight, cross-linked, linear low-density, and ultrahigh-molecular-weight. Includes a glossary of hydrocarbon terms. (MVL)

  15. 40 CFR 721.536 - Halogenated phenyl alkane.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Halogenated phenyl alkane. 721.536 Section 721.536 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.536 Halogenated phenyl alkane....

  16. 40 CFR 721.535 - Halogenated alkane (generic).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.535 Halogenated alkane (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as halogenated alkane (PMN P-01-433) is...

  17. 40 CFR 721.535 - Halogenated alkane (generic).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.535 Halogenated alkane (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as halogenated alkane (PMN P-01-433) is...

  18. 40 CFR 721.536 - Halogenated phenyl alkane.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.536 Halogenated phenyl alkane. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as halogenated phenyl alkane (PMN P-89-867)...

  19. 40 CFR 721.536 - Halogenated phenyl alkane.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.536 Halogenated phenyl alkane. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as halogenated phenyl alkane (PMN P-89-867)...

  20. Palladium-Catalyzed Double C-H Functionalization of Arenes at the Positions ortho and meta to Their Directing Group: Concise Synthesis of Benzocyclobutenes.

    PubMed

    Nanjo, Takeshi; Tsukano, Chihiro; Takemoto, Yoshiji

    2016-01-01

    The synthesis of benzocyclobutenes from simple arenes bearing a directing group was investigated via the palladium-catalyzed cyclization of norbornene derivatives. This approach allowed for the facile construction of benzocyclobutenes along with the double functionalization of the C-H bonds at the positions ortho and meta to the directing group. This result shows that the key palladacyclopentene intermediate in the Catellani reaction can be prepared by the directed double ortho C-H activation of the substrate. The results of this study also revealed that the combination of an N-protected amino acid with benzoquinone (BQ) was effective for this transformation.

  1. Importance of C-H-donor and C-H-anion contact interactions for the crystal packing, the lattice softness and the superconducting transition temperatures of organic conducting salts

    SciTech Connect

    Whangbo, M.-H.; Novoa, J.J.; Jung, D. . Dept. of Chemistry); Williams, J.M.; Kinj, A.M.; Wang, H.H.; Geiser, U.; Beno, M.A.; Carlson, K.D. )

    1990-01-01

    The organic donor molecule BEDT-TTF and its analogs 2--4 have yielded a number of ambient-pressure superconducting salts. What structural and electronic factors govern the magnitudes of their superconducting transition temperature {Tc} has been a topic of intense studies. Examination of the band electronic structures of closely related superconducting salts shows, that the magnitudes of their {Tc}'s are primarily determined by the softness of their crystal lattices. The crystal packing and the lattice softness of organic donor salts are strongly influenced by the donor{hor ellipsis}donor and donor{hor ellipsis}anion contact interactions involving the donor-molecule C-H bonds. In the present work, we briefly review the electronic structures of some representative organic salt superconductors and discuss the softness of their crytsal lattices on the basis of the interaction energies calculated for the C-H{hor ellipsis}donor and C-H{hor ellipsis}anion contact interactions. 34 refs., 14 figs., 8 tabs.

  2. Sophorolipids from Torulopsis bombicola: possible relation to alkane uptake.

    PubMed Central

    Ito, S; Inoue, S

    1982-01-01

    Torulopsis bombicola produces extracellular sophorolipids when it is grown on water-insoluble alkanes. Sophorolipids and related model compounds, which were not themselves used for growth, were found to stimulate markedly the growth of T. bombicola on alkanes. This stimulatory effect was restricted to growth on C10 to C20 alkanes, whereas no significantly influence was observed for growth on fatty alcohols, fatty acids, glucose, or glycerol. The nonionic methyl ester of the glycolipid supported the greatest cell yield. However, a number of synthetic nonionic surfactants were unable to replace the glycolipid. When organisms were grown on hexadecane, stimulation of growth by sophorolipids was observed almost exclusively with strains of Torulopsis yeasts. In contrast, the growth of other typical alkane-utilizing yeasts, such as candida and Pichia strains, was inhibited or not affected. It appears that sophorolipids are involved in alkane dissimilation by T. bombicola through an undetermined mechanism. PMID:7201782

  3. Alkanes in benthic organisms from the Buccaneer oil field

    SciTech Connect

    Middleditch, B.S.; Basile, B.

    1980-06-01

    About 200 g per day of alkanes are present in brine discharged from each of two production platforms in the Buccaneer oil field in the NW Gulf of Mexico. These alkanes disperse rapidly in the water column, so that seawater concentrations of petroleum alkanes in this region are generally very low. They can be taken up to some extent by plankton, fish, and barnacles, but the petroleum alkane concentrations in these organisms are also relatively low. The largest pool of petroleum alkanes is in the surficial sediments, where concentrations of up to 25 ppM are observed, with concentration gradients extending more than 20 m from the production platforms. Organisms are examined which are exposed to these sediments and, for comparison, other specimens from control sites around structures from which there are no discharges.

  4. Utilization of n-Alkanes by Cladosporium resinae

    PubMed Central

    Teh, J. S.; Lee, K. H.

    1973-01-01

    Four different isolates of Cladosporium resinae from Australian soils were tested for their ability to utilize liquid n-alkanes ranging from n-hexane to n-octadecane under standard conditions. The isolates were unable to make use of n-hexane, n-heptane, and n-octane for growth. In fact, these hydrocarbons, particularly n-hexane, exerted an inhibitory effect on spore germination and mycelial growth. All higher n-alkanes from n-nonane to n-octadecane were assimilated by the fungus, although only limited growth occurred on n-nonane and n-decane. The long chain n-alkanes (C14 to C18) supported good growth of all isolates, but there was no obvious correlation between cell yields and chain lengths of these n-alkanes. Variation in growth responses to individual n-alkane among the different isolates was also observed. The cause of this variation is unknown. PMID:4735447

  5. Theoretical study of the bond dissociation energies of methanol

    NASA Technical Reports Server (NTRS)

    Bauschlicher, Charles W., Jr.; Langhoff, Stephen R.; Walch, Stephen P.

    1992-01-01

    A theoretical study of the bond dissociation energies for H2O and CH3OH is presented. The C-H and O-H bond energies are computed accurately with the modified coupled-pair functional method using a large basis set. For these bonds, an accuracy of +/- 2 kcal/mol is achieved, which is consistent with the C-H and C-C single bond energies of other molecules. The C-O bond is much more difficult to compute accurately because it requires higher levels of correlation treatment and more extensive one-particle basis sets.

  6. Spectroscopy of the tilde A state of NO-alkane complexes (alkane = methane, ethane, propane, and n-butane)

    NASA Astrophysics Data System (ADS)

    Tamé-Reyes, Victor M.; Gardner, Adrian M.; Harris, Joe P.; McDaniel, Jodie; Wright, Timothy G.

    2012-12-01

    We have recorded (1+1) resonance-enhanced multiphoton ionization spectra of complexes formed between NO and the alkanes: CH4, C2H6, C3H8, and n-C4H10. The spectra correspond to the tilde A ← tilde X transition, which is a NO-localized 3s ← 2pπ* transition. In line with previous work, the spectrum for NO-CH4 has well-defined structure, but this is only partially resolved for the other complexes. The spectra recorded in the NO+-alkane mass channels all show a slowly rising onset, followed by a sharp offset, which is associated with dissociation of NO-alkane, from which binding energies in the tilde X and tilde A states are deduced. Beyond this sharp offset, there is a further rise in signal, which is attributed to fragmentation of higher complexes, NO-(alkane)n. Analysis of these features allows binding energies for (NO-alkane) ... alkane to be estimated, and these suggest that in the NO-(alkane)2 complexes, the second alkane molecule is bound to the first, rather than to NO. Calculated structures for the 1:1 complexes are reported, as well as binding energies.

  7. C-H and C-C clumping in ethane by high-resolution mass spectrometry

    NASA Astrophysics Data System (ADS)

    Clog, M. D.; Eiler, J. M.

    2014-12-01

    Ethane (C2H6) is an important natural compound, and its geochemistry can be studied through 13C-13C, 13C-D and/or D-D clumping. Such measurements are potentially important both as a stepping stone towards the study of more complex organic molecules and, in its own regard, to understand processes controlling the generation, migration and destruction of natural gas. Isotopic clumping on C-C and C-H bonds could be influenced by thermodynamics, chemical kinetics, diffusion or gas mixing. Previous work showed that 13C-D clumping in methane generally reflects equilibrium and provides a measure of formation temperature (Stolper et al 2014a), whereas 13C-13C clumping in ethane is likely most controlled by chemical-kinetic processes and/or inheritance from the isotopic structure of source organic compounds (Clog et al 2014). 13C-D clumping in ethane has the potential to provide a thermometer for its synthesis, as it does for methane. However, the difference in C-H bond dissociation energy for these two compounds may suggest a lower 'blocking temperature' for this phenomenon in ethane (the blocking temperature for methane is ≥~250 C in geological conditions). We present analytical techniques to measure both 13C-13C and 13C-D clumping in ethane, using a novel two-instrument technique, including both the Thermo 253-Ultra and the Thermo DFS. In this method, the Ultra is used to measure the relative abundances of combinations nearly isobaric isotopologues: (13C12CH6 + 12C2DH5)/12C2H6 and (13C2H6 + 12C13CDH5)/12C2H6, free of other isobaric interferences like O2. The DFS, a very high resolution single-collector instrument, is then used to measure the ratios of isotopologues of ethane at a single cardinal mass: 12C2DH5/13C12CH6, and 12C13CDH5/13C2H6, with precisions of ~1 permil. Those 4 measurements allow us to calculate the bulk isotopic composition (D and 13C) as well as the abundance of 13C2H6 and 13C12CDH5. We also present progress on the development of software tools

  8. Bent Bonds and Multiple Bonds.

    ERIC Educational Resources Information Center

    Robinson, Edward A.; Gillespie, Ronald J.

    1980-01-01

    Considers carbon-carbon multiple bonds in terms of Pauling's bent bond model, which allows direct calculation of double and triple bonds from the length of a CC single bond. Lengths of these multiple bonds are estimated from direct measurements on "bent-bond" models constructed of plastic tubing and standard kits. (CS)

  9. The influence of molecular structure and aerosol phase on the heterogeneous oxidation of normal and branched alkanes by OH.

    PubMed

    Ruehl, Christopher R; Nah, Theodora; Isaacman, Gabriel; Worton, David R; Chan, Arthur W H; Kolesar, Katheryn R; Cappa, Christopher D; Goldstein, Allen H; Wilson, Kevin R

    2013-05-16

    Insights into the influence of molecular structure and thermodynamic phase on the chemical mechanisms of hydroxyl radical-initiated heterogeneous oxidation are obtained by identifying reaction products of submicrometer particles composed of either n-octacosane (C28H58, a linear alkane) or squalane (C30H62, a highly branched alkane) and OH. A common pattern is observed in the positional isomers of octacosanone and octacosanol, with functionalization enhanced toward the end of the molecule. This suggests that relatively large linear alkanes are structured in submicrometer particles such that their ends are oriented toward the surface. For squalane, positional isomers of first-generation ketones and alcohols also form in distinct patterns. Ketones are favored on carbons adjacent to tertiary carbons, while hydroxyl groups are primarily found on tertiary carbons but also tend to form toward the end of the molecule. Some first-generation products, viz., hydroxycarbonyls and diols, contain two oxygen atoms. These results suggest that alkoxy radicals are important intermediates and undergo both intramolecular (isomerization) and intermolecular (chain propagation) hydrogen abstraction reactions. Oxidation products with carbon number less than the parent alkane's are observed to a much greater extent for squalane than for n-octacosane oxidation and can be explained by the preferential cleavage of bonds involving tertiary carbons.

  10. Structure and spectroscopic properties of neutral and cationic tetratomic [C,H,N,Zn] isomers: A theoretical study

    SciTech Connect

    Redondo, Pilar; Largo, Antonio; Vega-Vega, Álvaro; Barrientos, Carmen

    2015-05-14

    The structure and spectroscopic parameters of the most relevant [C,H,N,Zn] isomers have been studied employing high-level quantum chemical methods. For each isomer, we provide predictions for their molecular structure, thermodynamic stabilities as well as vibrational and rotational spectroscopic parameters which could eventually help in their experimental detection. In addition, we have carried out a detailed study of the bonding situations by means of a topological analysis of the electron density in the framework of the Bader’s quantum theory of atoms in molecules. The analysis of the relative stabilities and spectroscopic parameters suggests two linear isomers of the neutral [C,H,N,Zn] composition, namely, cyanidehydridezinc HZnCN ({sup 1}Σ) and hydrideisocyanidezinc HZnNC ({sup 1}Σ), as possible candidates for experimental detections. For the cationic [C,H,N,Zn]{sup +} composition, the most stable isomers are the ion-molecule complexes arising from the direct interaction of the zinc cation with either the nitrogen or carbon atom of either hydrogen cyanide or hydrogen isocyanide, namely, HCNZn{sup +} ({sup 2}Σ) and HCNZn{sup +} ({sup 2}Σ)

  11. Structure and spectroscopic properties of neutral and cationic tetratomic [C,H,N,Zn] isomers: A theoretical study.

    PubMed

    Redondo, Pilar; Largo, Antonio; Vega-Vega, Álvaro; Barrientos, Carmen

    2015-05-14

    The structure and spectroscopic parameters of the most relevant [C,H,N,Zn] isomers have been studied employing high-level quantum chemical methods. For each isomer, we provide predictions for their molecular structure, thermodynamic stabilities as well as vibrational and rotational spectroscopic parameters which could eventually help in their experimental detection. In addition, we have carried out a detailed study of the bonding situations by means of a topological analysis of the electron density in the framework of the Bader's quantum theory of atoms in molecules. The analysis of the relative stabilities and spectroscopic parameters suggests two linear isomers of the neutral [C,H,N,Zn] composition, namely, cyanidehydridezinc HZnCN ((1)Σ) and hydrideisocyanidezinc HZnNC ((1)Σ), as possible candidates for experimental detections. For the cationic [C,H,N,Zn](+) composition, the most stable isomers are the ion-molecule complexes arising from the direct interaction of the zinc cation with either the nitrogen or carbon atom of either hydrogen cyanide or hydrogen isocyanide, namely, HCNZn(+) ((2)Σ) and HCNZn(+) ((2)Σ).

  12. Laboratory spectroscopic analyses of electron irradiated alkanes and alkenes in solar system ices

    NASA Astrophysics Data System (ADS)

    Hand, K. P.; Carlson, R. W.

    2012-03-01

    We report results from laboratory experiments of 10 keV electron irradiation of thin ice films of water and short-chain hydrocarbons at ˜10-8 Torr and temperatures ranging from 70-100 K. Hydrocarbon mixtures include water with C3H8, C3H6, C4H10 (butane and isobutane), and C4H8, (1-butene and cis/trans-2-butene). The double bonds of the alkenes in our initial mixtures were rapidly destroyed or converted to single carbon bonds, covalent bonds with hydrogen, bonds with -OH (hydroxyl), bonds with oxygen (C-O), or double bonds with oxygen (carbonyl). Spectra resulting from irradiation of alkane and alkene ices are largely indistinguishable; the initial differences in film composition are destroyed and the resulting mixture includes long-chain, branched aliphatics, aldehydes, ketones, esters, and alcohols. Methane was observed as a product during radiolysis but CO was largely absent. We find that while some of the carbon is oxidized and lost to CO2 formation, some carbon is sequestered into highly refractory, long-chain aliphatic compounds that remain as a thin residue even after the ice film has been raised to standard temperature and pressure. We conclude that the high availability of hydrogen in our experiments leads to the formation of the formyl radical which then serves as the precursor for formaldehyde and polymerization of longer hydrocarbon chains.

  13. Adhesion of tungsten carbide reinforced amorphous hydrocarbon thin films (WC/a-C:H) to steel substrates for tribological applications

    SciTech Connect

    Evans, Ryan D.; Schiller, P. J; Howe, Jane Y

    2011-01-01

    We have explored the adhesive interlayer structure for a tungsten carbide reinforced amorphous hydrocarbon thin film coating (WC/a-C:H) that demonstrated excellent coating adhesion under highly stressed tribological contact. Transmission electron microscopy (TEM) analysis including cross-sectional imaging, electron diffraction, and energy dispersive spectroscopy was performed on abrupt and gradient interfaces within the multilayer film architecture. Interpretation of these results is aided by quantum mechanical calculations that were performed to investigate bonding interactions of the Cr adhesive interlayer to the Fe substrate surface within a - 3 nm thick interfacial region. Low levels of oxygen present in the coating deposition chamber during deposition were found at the Fe-Cr interface using high-resolution TEM. Molecular orbital calculations for a linear three-atom molecular model Fe-O-Cr demonstrate the role of O in strengthening Fe to Cr bonding within that interfacial region.

  14. Interatomic potentials for the Be-C-H system.

    PubMed

    Björkas, C; Juslin, N; Timko, H; Vörtler, K; Nordlund, K; Henriksson, K; Erhart, P

    2009-11-01

    Analytical bond-order potentials for beryllium, beryllium carbide and beryllium hydride are presented. The reactive nature of the formalism makes the potentials suitable for simulations of non-equilibrium processes such as plasma-wall interactions in fusion reactors. The Be and Be-C potentials were fitted to ab initio calculations as well as to experimental data of several different atomic configurations and Be-H molecule and defect data were used in determining the Be-H parameter set. Among other tests, sputtering, melting and quenching simulations were performed in order to check the transferability of the potentials. The antifluorite Be(2)C structure is well described by the Be-C potential and the hydrocarbon interactions are modelled by the established Brenner potentials. PMID:21832461

  15. Novel phase behavior in normal alkanes

    SciTech Connect

    Sirota, E.B.; King, H.E. Jr.; Hughes, G.J.; Wan, W.K. )

    1992-01-27

    X-ray scattering studies on aligned films of binary mixtures of the normal alkanes C{sub 23}H{sub 48} and C{sub 28}H{sub 58} reveal, for the first time in such materials, the existence of a new equilibrium phase having the symmetry of a smectic crystal, possibly a hexatic. This phase occurs between the hexagonally packed {ital R}{sub II} and the lower-temperature orthorhombic {ital R}{sub I}, plastic crystalline, layered, rotator phases. We argue that this loss of order is due to local distortion fluctuations in the hexagonal phase. Furthermore, we have identified an {ital ABC}-to-{ital ABAB} restacking transition within the ordered {ital R}{sub II} phase.

  16. A Catalytic Role for C-H/π Interactions in Base Excision Repair by Bacillus cereus DNA Glycosylase AlkD.

    PubMed

    Parsons, Zachary D; Bland, Joshua M; Mullins, Elwood A; Eichman, Brandt F

    2016-09-14

    DNA glycosylases protect genomic integrity by locating and excising aberrant nucleobases. Substrate recognition and excision usually take place in an extrahelical conformation, which is often stabilized by π-stacking interactions between the lesion nucleobase and aromatic side chains in the glycosylase active site. Bacillus cereus AlkD is the only DNA glycosylase known to catalyze base excision without extruding the damaged nucleotide from the DNA helix. Instead of contacting the nucleobase itself, the AlkD active site interacts with the lesion deoxyribose through a series of C-H/π interactions. These interactions are ubiquitous in protein structures, but evidence for their catalytic significance in enzymology is lacking. Here, we show that the C-H/π interactions between AlkD and the lesion deoxyribose participate in catalysis of glycosidic bond cleavage. This is the first demonstration of a catalytic role for C-H/π interactions as intermolecular forces important to DNA repair. PMID:27571247

  17. The vapor-particle partitioning of n-alkanes

    SciTech Connect

    Doskey, P.V.

    1994-04-01

    A mixed-phase partitioning model has been proposed to predict the distribution of n-alkanes between the vapor and particle phases in the atmosphere. n-Alkanes having terrestrial plant wax and petroleum origins are assumed to be associated with atmospheric particles as microcrystalline solids and subcooled liquids, respectively. The fraction of n-alkanes on atmospheric particles having plant wax and petroleum origins is estimated with carbon preference indices. Hypothetical terrestrial plant wax and petroleum mixtures are used to estimate the mole fractions of the n-alkanes in each phase and the molecular weights of the phases. Solid and subcooled liquid phase n-alkane vapor pressures are used in the model to predict the fraction of n-alkanes associated with particles in the atmosphere. Trends in the prediction of vapor-particle partitioning using these assumptions agree well with field observations. However, the fraction of particle phase n-alkanes predicted by the model was significantly different from the field observations.

  18. Long-chain alkane production by the yeast Saccharomyces cerevisiae.

    PubMed

    Buijs, Nicolaas A; Zhou, Yongjin J; Siewers, Verena; Nielsen, Jens

    2015-06-01

    In the past decade industrial-scale production of renewable transportation biofuels has been developed as an alternative to fossil fuels, with ethanol as the most prominent biofuel and yeast as the production organism of choice. However, ethanol is a less efficient substitute fuel for heavy-duty and maritime transportation as well as aviation due to its low energy density. Therefore, new types of biofuels, such as alkanes, are being developed that can be used as drop-in fuels and can substitute gasoline, diesel, and kerosene. Here, we describe for the first time the heterologous biosynthesis of long-chain alkanes by the yeast Saccharomyces cerevisiae. We show that elimination of the hexadecenal dehydrogenase Hfd1 and expression of a redox system are essential for alkane biosynthesis in yeast. Deletion of HFD1 together with expression of an alkane biosynthesis pathway resulted in the production of the alkanes tridecane, pentadecane, and heptadecane. Our study provides a proof of principle for producing long-chain alkanes in the industrial workhorse S. cerevisiae, which was so far limited to bacteria. We anticipate that these findings will be a key factor for further yeast engineering to enable industrial production of alkane based drop-in biofuels, which can allow the biofuel industry to diversify beyond bioethanol.

  19. Long-chain alkane production by the yeast Saccharomyces cerevisiae.

    PubMed

    Buijs, Nicolaas A; Zhou, Yongjin J; Siewers, Verena; Nielsen, Jens

    2015-06-01

    In the past decade industrial-scale production of renewable transportation biofuels has been developed as an alternative to fossil fuels, with ethanol as the most prominent biofuel and yeast as the production organism of choice. However, ethanol is a less efficient substitute fuel for heavy-duty and maritime transportation as well as aviation due to its low energy density. Therefore, new types of biofuels, such as alkanes, are being developed that can be used as drop-in fuels and can substitute gasoline, diesel, and kerosene. Here, we describe for the first time the heterologous biosynthesis of long-chain alkanes by the yeast Saccharomyces cerevisiae. We show that elimination of the hexadecenal dehydrogenase Hfd1 and expression of a redox system are essential for alkane biosynthesis in yeast. Deletion of HFD1 together with expression of an alkane biosynthesis pathway resulted in the production of the alkanes tridecane, pentadecane, and heptadecane. Our study provides a proof of principle for producing long-chain alkanes in the industrial workhorse S. cerevisiae, which was so far limited to bacteria. We anticipate that these findings will be a key factor for further yeast engineering to enable industrial production of alkane based drop-in biofuels, which can allow the biofuel industry to diversify beyond bioethanol. PMID:25545362

  20. Expanding the product profile of a microbial alkane biosynthetic pathway.

    PubMed

    Harger, Matthew; Zheng, Lei; Moon, Austin; Ager, Casey; An, Ju Hye; Choe, Chris; Lai, Yi-Ling; Mo, Benjamin; Zong, David; Smith, Matthew D; Egbert, Robert G; Mills, Jeremy H; Baker, David; Pultz, Ingrid Swanson; Siegel, Justin B

    2013-01-18

    Microbially produced alkanes are a new class of biofuels that closely match the chemical composition of petroleum-based fuels. Alkanes can be generated from the fatty acid biosynthetic pathway by the reduction of acyl-ACPs followed by decarbonylation of the resulting aldehydes. A current limitation of this pathway is the restricted product profile, which consists of n-alkanes of 13, 15, and 17 carbons in length. To expand the product profile, we incorporated a new part, FabH2 from Bacillus subtilis , an enzyme known to have a broader specificity profile for fatty acid initiation than the native FabH of Escherichia coli . When provided with the appropriate substrate, the addition of FabH2 resulted in an altered alkane product profile in which significant levels of n-alkanes of 14 and 16 carbons in length are produced. The production of even chain length alkanes represents initial steps toward the expansion of this recently discovered microbial alkane production pathway to synthesize complex fuels. This work was conceived and performed as part of the 2011 University of Washington international Genetically Engineered Machines (iGEM) project.

  1. Chain-Chain Interaction between Surfactant Monolayers and long-chain Alkanes and Alcohols

    NASA Astrophysics Data System (ADS)

    Miranda, Paulo; Pflumio, V.; Saijo, H.; Shen, Y. R.

    1997-03-01

    Infrared-Visible Sum-frequency Vibrational Spectroscopy is used to study various self-assembled surfactant monolayers adsorbed at interfaces between fused quartz and liquid alkanes and alcohols. Information about chain conformation can be deduced from the polarization-dependent spectra. Changing the chain lengths of both alkanes and surfactants, we find that if both are sufficiently long, the amount of trans-gauche defects of the surfactant chains can be significantly reduced, via the chain-chain interaction. This, however, will not happen if the surfactant monolayer has too low a surface density. In the case of long-chain alcohols, the alcohol molecules form a hydrogen-bonding network at the interface. To minimize disruption of this network, the surfactant chains become highly disordered and folded into a compact conformation, to reduce their surface area exposed to the alcohol (hydrophobic effect). However, for a sufficiently long alcohol dissolved in a non-polar solvent, the hydrogen-bonding network is disrupted. The alcohol molecules appear to adsorb at the interface and straighten the surfactant chains via the chain-chain interaction. Work supported by DOE under contract No DE-AC03-76SF00098.

  2. Intramolecular cyclopropanation and C-H insertion reactions with metal carbenoids generated from cyclopropenes.

    PubMed

    Archambeau, Alexis; Miege, Frédéric; Meyer, Christophe; Cossy, Janine

    2015-04-21

    Activation of unsaturated carbon-carbon bonds by means of transition metal catalysts is an exceptionally active research field in organic synthesis. In this context, due to their high ring strain, cyclopropenes constitute an interesting class of substrates that displays a versatile reactivity in the presence of transition metal catalysts. Metal complexes of vinyl carbenes are involved as key intermediates in a wide variety of transition metal-catalyzed ring-opening reactions of cyclopropenes. Most of the reported transformations rely on intermolecular or intramolecular addition of nucleophiles to these latter reactive species. This Account focuses specifically on the reactivity of carbenoids resulting from the ring-opening of cyclopropenes in cyclopropanation and C-H insertion reactions, which are arguably two of the most representative transformations of metal complexes of carbenes. Compared with the more conventional α-diazo carbonyl compounds, the use of cyclopropenes as precursors of metal carbenoids in intramolecular cyclopropanation or C-H insertion reactions has been largely underexploited. One of the challenges is to devise appropriately substituted and readily available cyclopropenes that would not only undergo regioselective ring-opening under mild conditions but also trigger the subsequent desired transformations with a high level of chemoselectivity and stereoselectivity. These goals were met by considering several substrates derived from the readily available 3,3-dimethylcyclopropenylcarbinols or 3,3-dimethylcyclopropenylcarbinyl amines. In the case of 1,6-cyclopropene-enes, highly efficient and diastereoselective gold(I)-catalyzed ring-opening/intramolecular cyclopropanations were developed as a route to diversely substituted heterocycles and carbocycles possessing a bicyclo[4.1.0]heptane framework. The use of rhodium(II) catalysts enabled us to widen the scope of this transformation for the synthesis of medium-sized heterocyclic scaffolds

  3. Heterogeneity of Alkane Chain Length in Freshwater and Marine Cyanobacteria

    PubMed Central

    Shakeel, Tabinda; Fatma, Zia; Fatma, Tasneem; Yazdani, Syed Shams

    2015-01-01

    The potential utilization of cyanobacteria for the biological production of alkanes represents an exceptional system for the next generation of biofuels. Here, we analyzed a diverse group of freshwater and marine cyanobacterial isolates from Indian culture collections for their ability to produce both alkanes and alkenes. Among the 50 cyanobacterial isolates screened, 32 isolates; 14 freshwater and 18 marine isolates; produced predominantly alkanes. The GC-MS/MS profiles revealed a higher percentage of pentadecane and heptadecane production for marine and freshwater strains, respectively. Oscillatoria species were found to be the highest producers of alkanes. Among the freshwater isolates, Oscillatoria CCC305 produced the maximum alkane level with 0.43 μg/mg dry cell weight, while Oscillatoria formosa BDU30603 was the highest producer among the marine isolates with 0.13 μg/mg dry cell weight. Culturing these strains under different media compositions showed that the alkane chain length was not influenced by the growth medium but was rather an inherent property of the strains. Analysis of the cellular fatty acid content indicated the presence of predominantly C16 chain length fatty acids in marine strains, while the proportion of C18 chain length fatty acids increased in the majority of freshwater strains. These results correlated with alkane chain length specificity of marine and freshwater isolates indicating that alkane chain lengths may be primarily determined by the fatty acid synthesis pathway. Moreover, the phylogenetic analysis showed clustering of pentadecane-producing marine strains that was distinct from heptadecane-producing freshwater strains strongly suggesting a close association between alkane chain length and the cyanobacteria habitat. PMID:25853127

  4. The rate of intramolecular vibrational energy relaxation of the fundamental C-H stretch in (CF3)3C-C [equivalent] C-H

    NASA Astrophysics Data System (ADS)

    Gambogi, Joan E.; Lehmann, Kevin K.; Pate, Brooks H.; Scoles, Giacinto; Yang, Xueming

    1993-01-01

    The high resolution spectrum of the fundamental C-H stretch in (CF3)3C-C≡C-H has been measured using optothermal detection of a collimated molecular beam. Only the Q branch was resolvable and was fit to a Lorentzian with a full width at half maximum of 2.76 GHz, corresponding to an IVR lifetime of 60 ps. The decrease in lifetime in comparison to (CH3)3C-C≡C-H is thought to be due to strong mixing between the C-F stretches and bends and the backbone C-C stretches and bends.

  5. Properties of a-C:H:Si thin films deposited by middle-frequency magnetron sputtering

    NASA Astrophysics Data System (ADS)

    Jiang, Jinlong; Wang, Yubao; Du, Jinfang; Yang, Hua; Hao, Junying

    2016-08-01

    The silicon doped hydrogenated amorphous carbon (a-C:H:Si) films were prepared on silicon substrates by middle-frequency magnetron sputtering silicon target in an argon and methane gas mixture atmosphere. The deposition rate, chemical composition, structure, surface properties, stress, hardness and tribological properties in the ambient air of the films were systemically investigated using X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), atomic force microscopy (AFM), nanoindentation and tribological tester. The results show that doped silicon content in the films is controlled in the wide range from 39.7 at.% to 0.2 at.% by various methane gas flow rate, and methane flow rate affects not only the silicon content but also its chemical bonding structure in the films due to the transformation of sputtering modes. Meanwhile, the sp3 carbon component in the films linearly increases with increasing of methane flow rate. The film deposited at moderate methane flow rate of 40-60 sccm exhibits the very smooth surface (RMS roughness 0.4 nm), low stress (0.42 GPa), high hardness (21.1 GPa), as well as low friction coefficient (0.038) and wear rate (1.6 × 10-7 mm3/Nm). The superior tribological performance of the films could be attributed to the formation and integral covering of the transfer materials on the sliding surface and their high hardness.

  6. Alkanes-filled photonic crystal fibers as sensor transducers

    NASA Astrophysics Data System (ADS)

    Marć, P.; Przybysz, N.; Stasiewicz, K.; Jaroszewicz, L. R.

    2015-09-01

    In this paper we propose alkanes-filled PCFs as the new class of transducers for optical fiber sensors. We investigated experimentally thermo-optic properties of a commercially available LMA8 partially filled with different alkanes with a higher number of carbon atoms. A partially filled PCF spliced with standard SMFs constitutes one of the newest type transducer. We have selected a group of eight alkanes which have melting points in different temperatures. An analysis of temperature spectral characteristics of these samples will allow to design an optical fiber sensor with different temperature thresholds at specific wavelengths.

  7. Alcohols as alkylating agents in heteroarene C-H functionalization

    NASA Astrophysics Data System (ADS)

    Jin, Jian; MacMillan, David W. C.

    2015-09-01

    Redox processes and radical intermediates are found in many biochemical processes, including deoxyribonucleotide synthesis and oxidative DNA damage. One of the core principles underlying DNA biosynthesis is the radical-mediated elimination of H2O to deoxygenate ribonucleotides, an example of `spin-centre shift', during which an alcohol C-O bond is cleaved, resulting in a carbon-centred radical intermediate. Although spin-centre shift is a well-understood biochemical process, it is underused by the synthetic organic chemistry community. We wondered whether it would be possible to take advantage of this naturally occurring process to accomplish mild, non-traditional alkylation reactions using alcohols as radical precursors. Because conventional radical-based alkylation methods require the use of stoichiometric oxidants, increased temperatures or peroxides, a mild protocol using simple and abundant alkylating agents would have considerable use in the synthesis of diversely functionalized pharmacophores. Here we describe the development of a dual catalytic alkylation of heteroarenes, using alcohols as mild alkylating reagents. This method represents the first, to our knowledge, broadly applicable use of unactivated alcohols as latent alkylating reagents, achieved via the successful merger of photoredox and hydrogen atom transfer catalysis. The value of this multi-catalytic protocol has been demonstrated through the late-stage functionalization of the medicinal agents, fasudil and milrinone.

  8. Pd/NbOPO₄ multifunctional catalyst for the direct production of liquid alkanes from aldol adducts of furans.

    PubMed

    Xia, Qi-Neng; Cuan, Qian; Liu, Xiao-Hui; Gong, Xue-Qing; Lu, Guan-Zhong; Wang, Yan-Qin

    2014-09-01

    Great efforts have been made to convert renewable biomass into transportation fuels. Herein, we report the novel properties of NbO(x)-based catalysts in the hydrodeoxygenation of furan-derived adducts to liquid alkanes. Excellent activity and stability were observed with almost no decrease in octane yield (>90% throughout) in a 256 h time-on-stream test. Experimental and theoretical studies showed that NbO(x) species play the key role in C-O bond cleavage. As a multifunctional catalyst, Pd/NbOPO4 plays three roles in the conversion of aldol adducts into alkanes: 1) The noble metal (in this case Pd) is the active center for hydrogenation; 2) NbO(x) species help to cleave the C-O bond, especially of the tetrahydrofuran ring; and 3) a niobium-based solid acid catalyzes the dehydration, thus enabling the quantitative conversion of furan-derived adducts into alkanes under mild conditions. PMID:25045056

  9. Single-Molecule Conductance through Hydrogen Bonds: The Role of Resonances.

    PubMed

    Wimmer, Micah; Palma, Julio L; Tarakeshwar, Pilarisetty; Mujica, Vladimiro

    2016-08-01

    The single-molecule conductance of hydrogen-bonded and alkane systems are compared in this theoretical investigation. The results indicate that for short chains, the H-bonded molecules exhibit larger conductance than the alkanes. Although earlier experimental investigations attributed this observation to a large density of states (DOS) corresponding to an occupied molecular orbital below the Fermi energy, the current work indicates the presence of a Fano resonance in the transmission function in the vicinity of the Fermi energy. The inclusion of this observation is essential in understanding the behavior of these systems. We also address the characteristics of the H-bond for transport and provide an explanation for the presence of a turnover regime wherein the conductance of the alkanes becomes larger than the H-bonded systems. Incidentally, this feature cannot be explained using a simple DOS argument. PMID:27424944

  10. Process for converting light alkanes to higher hydrocarbons

    DOEpatents

    Noceti, Richard P.; Taylor, Charles E.

    1988-01-01

    A process is disclosed for the production of aromatic-rich, gasoline boiling range hydrocarbons from the lower alkanes, particularly from methane. The process is carried out in two stages. In the first, alkane is reacted with oxygen and hydrogen chloride over an oxyhydrochlorination catalyst such as copper chloride with minor proportions of potassium chloride and rare earth chloride. This produces an intermediate gaseous mixture containing water and chlorinated alkanes. The chlorinated alkanes are contacted with a crystalline aluminosilicate catalyst in the hydrogen or metal promoted form to produce gasoline range hydrocarbons with a high proportion of aromatics and a small percentage of light hydrocarbons (C.sub.2 -C.sub.4). The light hydrocarbons can be recycled for further processing over the oxyhydrochlorination catalyst.

  11. Activation of B-H, Si-H, and C-F bonds with Tp'Rh(PMe3) complexes: kinetics, mechanism, and selectivity.

    PubMed

    Procacci, Barbara; Jiao, Yunzhe; Evans, Meagan E; Jones, William D; Perutz, Robin N; Whitwood, Adrian C

    2015-01-28

    The photochemical reactions of Tp'Rh(PMe3)H2 (1) and thermal reactions of Tp'Rh(PMe3)(CH3)H (1a, Tp' = tris(3,5-dimethylpyrazolyl)borate) with substrates containing B-H, Si-H, C-F, and C-H bonds are reported. Complexes 1 and 1a are known activators of C-H bonds, including those of alkanes. Kinetic studies of reactions with HBpin and PhSiH3 show that photodissociation of H2 from 1 occurs prior to substrate attack, whereas thermal reaction of 1a proceeds by bimolecular reaction with the substrate. Complete intramolecular selectivity for B-H over C-H activation of HBpin (pin = pinacolate) leading to Tp'Rh(PMe3)(Bpin)H is observed. Similarly, the reaction with Et2SiH2 shows a strong preference for Si-H over C-H activation, generating Tp'Rh(PMe3)(SiEt2H)H. The Rh(Bpin)H and Rh(SiEt2H)H products were stable to heating in benzene in accord with DFT calculations that showed that reaction with benzene is endoergic. The intramolecular competition with PhSiH3 yields a ∼1:4 mixture of Tp'Rh(PMe3)(C6H4SiH3)H and Tp'Rh(PMe3)(SiPhH2)H, respectively. Reaction with pentafluoropyridine generates Tp'Rh(PMe3)(C5NF4)F, while reaction with 2,3,5,6-tetrafluoropyridine yields a mixture of C-H and C-F activated products. Hexafluorobenzene proves unreactive. Crystal structures are reported for B-H, Si-H, and C-F activated products, but in the latter case a bifluoride complex Tp'Rh(PMe3)(C5NF4)(FHF) was crystallized. Intermolecular competition reactions were studied by photoreaction of 1 in C6F6 with benzene and another substrate (HBpin, PhSiH3, or pentafluoropyridine) employing in situ laser photolysis in the NMR probe, resulting in a wide-ranging map of kinetic selectivities. The mechanisms of intramolecular and intermolecular selection are analyzed.

  12. Ruthenium(II)-Catalyzed C-H Activation of Imidamides and Divergent Couplings with Diazo Compounds: Substrate-Controlled Synthesis of Indoles and 3H-Indoles.

    PubMed

    Li, Yunyun; Qi, Zisong; Wang, He; Yang, Xifa; Li, Xingwei

    2016-09-19

    Indoles are an important structural motif that is commonly found in biologically active molecules. In this work, conditions for divergent couplings between imidamides and acceptor-acceptor diazo compounds were developed that afforded NH indoles and 3H-indoles under ruthenium catalysis. The coupling of α-diazoketoesters afforded NH indoles by cleavage of the C(N2 )-C(acyl) bond whereas α-diazomalonates gave 3H-indoles by C-N bond cleavage. This reaction constitutes the first intermolecular coupling of diazo substrates with arenes by ruthenium-catalyzed C-H activation. PMID:27558084

  13. Contribution of cyanobacterial alkane production to the ocean hydrocarbon cycle.

    PubMed

    Lea-Smith, David J; Biller, Steven J; Davey, Matthew P; Cotton, Charles A R; Perez Sepulveda, Blanca M; Turchyn, Alexandra V; Scanlan, David J; Smith, Alison G; Chisholm, Sallie W; Howe, Christopher J

    2015-11-01

    Hydrocarbons are ubiquitous in the ocean, where alkanes such as pentadecane and heptadecane can be found even in waters minimally polluted with crude oil. Populations of hydrocarbon-degrading bacteria, which are responsible for the turnover of these compounds, are also found throughout marine systems, including in unpolluted waters. These observations suggest the existence of an unknown and widespread source of hydrocarbons in the oceans. Here, we report that strains of the two most abundant marine cyanobacteria, Prochlorococcus and Synechococcus, produce and accumulate hydrocarbons, predominantly C15 and C17 alkanes, between 0.022 and 0.368% of dry cell weight. Based on global population sizes and turnover rates, we estimate that these species have the capacity to produce 2-540 pg alkanes per mL per day, which translates into a global ocean yield of ∼ 308-771 million tons of hydrocarbons annually. We also demonstrate that both obligate and facultative marine hydrocarbon-degrading bacteria can consume cyanobacterial alkanes, which likely prevents these hydrocarbons from accumulating in the environment. Our findings implicate cyanobacteria and hydrocarbon degraders as key players in a notable internal hydrocarbon cycle within the upper ocean, where alkanes are continually produced and subsequently consumed within days. Furthermore we show that cyanobacterial alkane production is likely sufficient to sustain populations of hydrocarbon-degrading bacteria, whose abundances can rapidly expand upon localized release of crude oil from natural seepage and human activities.

  14. Contribution of cyanobacterial alkane production to the ocean hydrocarbon cycle

    PubMed Central

    Lea-Smith, David J.; Biller, Steven J.; Davey, Matthew P.; Cotton, Charles A. R.; Perez Sepulveda, Blanca M.; Turchyn, Alexandra V.; Scanlan, David J.; Smith, Alison G.; Chisholm, Sallie W.; Howe, Christopher J.

    2015-01-01

    Hydrocarbons are ubiquitous in the ocean, where alkanes such as pentadecane and heptadecane can be found even in waters minimally polluted with crude oil. Populations of hydrocarbon-degrading bacteria, which are responsible for the turnover of these compounds, are also found throughout marine systems, including in unpolluted waters. These observations suggest the existence of an unknown and widespread source of hydrocarbons in the oceans. Here, we report that strains of the two most abundant marine cyanobacteria, Prochlorococcus and Synechococcus, produce and accumulate hydrocarbons, predominantly C15 and C17 alkanes, between 0.022 and 0.368% of dry cell weight. Based on global population sizes and turnover rates, we estimate that these species have the capacity to produce 2–540 pg alkanes per mL per day, which translates into a global ocean yield of ∼308–771 million tons of hydrocarbons annually. We also demonstrate that both obligate and facultative marine hydrocarbon-degrading bacteria can consume cyanobacterial alkanes, which likely prevents these hydrocarbons from accumulating in the environment. Our findings implicate cyanobacteria and hydrocarbon degraders as key players in a notable internal hydrocarbon cycle within the upper ocean, where alkanes are continually produced and subsequently consumed within days. Furthermore we show that cyanobacterial alkane production is likely sufficient to sustain populations of hydrocarbon-degrading bacteria, whose abundances can rapidly expand upon localized release of crude oil from natural seepage and human activities. PMID:26438854

  15. Cuprous Oxide Catalyzed Oxidative C-C Bond Cleavage for C-N Bond Formation: Synthesis of Cyclic Imides from Ketones and Amines.

    PubMed

    Wang, Min; Lu, Jianmin; Ma, Jiping; Zhang, Zhe; Wang, Feng

    2015-11-16

    Selective oxidative cleavage of a C-C bond offers a straightforward method to functionalize organic skeletons. Reported herein is the oxidative C-C bond cleavage of ketone for C-N bond formation over a cuprous oxide catalyst with molecular oxygen as the oxidant. A wide range of ketones and amines are converted into cyclic imides with moderate to excellent yields. In-depth studies show that both α-C-H and β-C-H bonds adjacent to the carbonyl groups are indispensable for the C-C bond cleavage. DFT calculations indicate the reaction is initiated with the oxidation of the α-C-H bond. Amines lower the activation energy of the C-C bond cleavage, and thus promote the reaction. New insight into the C-C bond cleavage mechanism is presented. PMID:26494312

  16. A Comparison of the Monolayer Dynamics of the Branched Alkane Squalane and the Normal Alkane Tetracosane Adsorbed on Graphite

    NASA Astrophysics Data System (ADS)

    Enevoldsen, A. D.; Hansen, F. Y.; Diama, A.; Taub, H.

    2004-03-01

    Squalane is a branched alkane (C_30H_62) with 24 carbon atoms in its backbone, like the normal alkane tetracosane ( n-C_24H_50), and six symmetrically placed methyl side groups. In general, branched alkanes such as squalane are better lubricants than n-alkanes. We have studied the dynamics of the squalane and tetracosane monolayers by quasielastic neutron scattering and molecular dynamics (MD) simulations on two different time scales. Both experiments and simulations showed that diffusion at 260 K is about 2.5 times faster in the squalane than in the tetracosane system. It is somewhat surprising that the diffusion in a system with a branched alkane is faster than with a normal alkane. A possible explanation is that the squalane molecule does not bind as strongly to the surface as tetracosane, because the MD simulations have shown that the adsorbed molecules have a distorted backbone. This may also explain why the slow intramolecular motions associated with conformational changes are seen at lower temperatures in the squalane than the tetracosane monolayer where they are only observed near melting.

  17. Rh-catalyzed sulfonic acid group directed ortho C-H olefination of arenes.

    PubMed

    Dong, Yi; Liu, Gang

    2013-09-21

    A Rh-catalyzed ortho C-H olefination of arenes directed by a sulfonic acid group was developed with good yields and a broad reaction scope. Efficient performance of the catalyst caused this electron-poor aromatic C-H to be activated effectively and unactivated alkenes are also suitable for this reaction.

  18. Palladium/copper-catalyzed oxidative C-H alkenylation/N-dealkylative carbonylation of tertiary anilines.

    PubMed

    Shi, Renyi; Lu, Lijun; Zhang, Hua; Chen, Borui; Sha, Yuchen; Liu, Chao; Lei, Aiwen

    2013-09-27

    C-H/C-N activation: The first palladium/copper-catalyzed aerobic oxidative C-H alkenylation/N-dealkylative carbonylation of tertiary anilines has been developed. Various functional groups were tolerated and acrylic ester could also be suitable substrates. This transformation provided efficient and straightforward synthesis of biologically active 3-methyleneindolin-2-one derivatives from cheap and simple substrates.

  19. Selective hydroxylation of alkanes by an extracellular fungal peroxygenase.

    PubMed

    Peter, Sebastian; Kinne, Matthias; Wang, Xiaoshi; Ullrich, René; Kayser, Gernot; Groves, John T; Hofrichter, Martin

    2011-10-01

    Fungal peroxygenases are novel extracellular heme-thiolate biocatalysts that are capable of catalyzing the selective monooxygenation of diverse organic compounds, using only H(2)O(2) as a cosubstrate. Little is known about the physiological role or the catalytic mechanism of these enzymes. We have found that the peroxygenase secreted by Agrocybe aegerita catalyzes the H(2)O(2)-dependent hydroxylation of linear alkanes at the 2-position and 3-position with high efficiency, as well as the regioselective monooxygenation of branched and cyclic alkanes. Experiments with n-heptane and n-octane showed that the hydroxylation proceeded with complete stereoselectivity for the (R)-enantiomer of the corresponding 3-alcohol. Investigations with a number of model substrates provided information about the route of alkane hydroxylation: (a) the hydroxylation of cyclohexane mediated by H(2)(18)(2) resulted in complete incorporation of (18)O into the hydroxyl group of the product cyclohexanol; (b) the hydroxylation of n-hexane-1,1,1,2,2,3,3-D(7) showed a large intramolecular deuterium isotope effect [(k(H)/k(D))(obs)] of 16.0 ± 1.0 for 2-hexanol and 8.9 ± 0.9 for 3-hexanol; and (c) the hydroxylation of the radical clock norcarane led to an estimated radical lifetime of 9.4 ps and an oxygen rebound rate of 1.06 × 10(11) s(-1). These results point to a hydrogen abstraction and oxygen rebound mechanism for alkane hydroxylation. The peroxygenase appeared to lack activity on long-chain alkanes (> C(16)) and highly branched alkanes (e.g. tetramethylpentane), but otherwise exhibited a broad substrate range. It may accordingly have a role in the bioconversion of natural and anthropogenic alkane-containing structures (including alkyl chains of complex biomaterials) in soils, plant litter, and wood. PMID:21812933

  20. Transition-metal-catalyzed Chelation-assisted C-H Functionalization of Aromatic Substrates.

    PubMed

    Zhao, Binlin; Shi, Zhuangzhi; Yuan, Yu

    2016-04-01

    In the past decade, transition-metal-catalyzed C-H activations have been very popular in the research field of organometallic chemistry, and have been considered as efficient and convenient strategies to afford complex natural products, functional advanced materials, fluorescent compounds, and pharmaceutical compounds. In this account, we begin with a brief introduction to the development of transition-metal-catalyzed C-H activation, especially the development of transition-metal-catalyzed chelation-assisted C-H activation. Then, a more detailed discussion is directed towards our recent studies on the transition-metal-catalyzed chelation-assisted oxidative C-H/C-H functionalization of aromatic substrates bearing directing functional groups.

  1. Transition-metal-catalyzed Chelation-assisted C-H Functionalization of Aromatic Substrates.

    PubMed

    Zhao, Binlin; Shi, Zhuangzhi; Yuan, Yu

    2016-04-01

    In the past decade, transition-metal-catalyzed C-H activations have been very popular in the research field of organometallic chemistry, and have been considered as efficient and convenient strategies to afford complex natural products, functional advanced materials, fluorescent compounds, and pharmaceutical compounds. In this account, we begin with a brief introduction to the development of transition-metal-catalyzed C-H activation, especially the development of transition-metal-catalyzed chelation-assisted C-H activation. Then, a more detailed discussion is directed towards our recent studies on the transition-metal-catalyzed chelation-assisted oxidative C-H/C-H functionalization of aromatic substrates bearing directing functional groups. PMID:26968749

  2. Integrated catalysis opens new arylation pathways via regiodivergent enzymatic C-H activation.

    PubMed

    Latham, Jonathan; Henry, Jean-Marc; Sharif, Humera H; Menon, Binuraj R K; Shepherd, Sarah A; Greaney, Michael F; Micklefield, Jason

    2016-01-01

    Despite major recent advances in C-H activation, discrimination between two similar, unactivated C-H positions is beyond the scope of current chemocatalytic methods. Here we demonstrate that integration of regioselective halogenase enzymes with Pd-catalysed cross-coupling chemistry, in one-pot reactions, successfully addresses this problem for the indole heterocycle. The resultant 'chemobio-transformation' delivers a range of functionally diverse arylated products that are impossible to access using separate enzymatic or chemocatalytic C-H activation, under mild, aqueous conditions. This use of different biocatalysts to select different C-H positions contrasts with the prevailing substrate-control approach to the area, and presents opportunities for new pathways in C-H activation chemistry. The issues of enzyme and transition metal compatibility are overcome through membrane compartmentalization, with the optimized process requiring no intermediate work-up or purification steps. PMID:27283121

  3. Anti-inflammatory activity of Arnica montana 6cH: preclinical study in animals.

    PubMed

    Macêdo, S B; Ferreira, L R; Perazzo, F F; Carvalho, J C

    2004-04-01

    The anti-inflammatory effect of Arnica montana 6cH was evaluated using acute and chronic inflammation models. In the acute, model, carrageenin-induced rat paw oedema, the group treated with Arnica montana 6cH showed 30% inhibition compared to control (P < 0.05). Treatment with Arnica 6cH, 30 min prior to carrageenin, did not produce any inhibition of the inflammatory process. In the chronic model, Nystatin-induced oedema, the group treated 3 days previously with Arnica montana 6cH had reduced inflammation 6 h after the inflammatory agent was applied (P < 0.05). When treatment was given 6 h after Nystatin treatment, there was no significant inhibitory effect. In a model based on histamine-induced increase of vascular permeability, pretreatment with Arnica montana 6cH blocked the action of histamine in increasing vascular permeability.

  4. Non-directed, carbonate-mediated C-H activation and aerobic C-H oxygenation with Cp*Ir catalysts.

    PubMed

    Kerr, M E; Ahmed, I; Gunay, A; Venditto, N J; Zhu, F; Ison, E A; Emmert, M H

    2016-06-14

    The effect of oxidatively stable L- and X-type additives on the activity of Cp*Ir catalyst precursors in the C-H activation of arenes has been studied. Turnover numbers for C-H activation of up to 65 can thus be achieved, as determined by H/D exchange in MeOH-D4. In particular, carbonate additives are found to enhance the C-H activation reactivity of Cp*Ir(H2O)3(OTf)2 () more significantly than L-type ligands investigated in this study. Based on these studies, Cp*Ir/carbonate systems are developed that catalyze the aerobic Csp(3)-H oxygenation of alkyl arenes, employing air as oxidant.

  5. Double C-H functionalization in sequential order: direct synthesis of polycyclic compounds by a palladium-catalyzed C-H alkenylation-arylation cascade.

    PubMed

    Ohno, Hiroaki; Iuchi, Mutsumi; Kojima, Naoto; Yoshimitsu, Takehiko; Fujii, Nobutaka; Tanaka, Tetsuaki

    2012-04-23

    Palladium-catalyzed cascade C-H alkenylation and arylation provides convenient access to polycyclic aromatic compounds. Treatment of 3-bromoaniline derivatives bearing a bromocinnamyl group on the nitrogen atom with a catalytic amount of [Pd(OAc)(2)] and PCy(3)·HBF(4) in the presence of Cs(2)CO(3) in dioxane affords naphthalene-fused indole derivatives in good yields. This double cyclization reaction is also applicable to heterocyclic substrates, giving fused indoles containing a heteroaromatic ring such as dibenzofuran, dibenzothiophene, carbazole, indole, or benzofuran through heterocyclic C-H arylation. When using a 2,6-unsubstituted aniline derivative, the first C-H arylation preferentially proceeds at the more hindered position of the aniline ring.

  6. Molecular dynamics insight to phase transition in n-alkanes with carbon nanofillers

    SciTech Connect

    Rastogi, Monisha; Vaish, Rahul

    2015-05-15

    The present work aims to investigate the phase transition, dispersion and diffusion behavior of nanocomposites of carbon nanotube (CNT) and straight chain alkanes. These materials are potential candidates for organic phase change materials(PCMs) and have attracted flurry of research recently. Accurate experimental evaluation of the mass, thermal and transport properties of such composites is both difficult as well as economically taxing. Additionally it is crucial to understand the factors that results in modification or enhancement of their characteristic at atomic or molecular level. Classical molecular dynamics approach has been extended to elucidate the same. Bulk atomistic models have been generated and subjected to rigorous multistage equilibration. To reaffirm the approach, both canonical and constant-temperature, constant- pressure ensembles were employed to simulate the models under consideration. Explicit determination of kinetic, potential, non-bond and total energy assisted in understanding the enhanced thermal and transport property of the nanocomposites from molecular point of view. Crucial parameters including mean square displacement and simulated self diffusion coefficient precisely define the balance of the thermodynamic and hydrodynamic interactions. Radial distribution function also reflected the density variation, strength and mobility of the nanocomposites. It is expected that CNT functionalization could improve the dispersion within n-alkane matrix. This would further ameliorate the mass and thermal properties of the composite. Additionally, the determined density was in good agreement with experimental data. Thus, molecular dynamics can be utilized as a high throughput technique for theoretical investigation of nanocomposites PCMs.

  7. Molecular dynamics insight to phase transition in n-alkanes with carbon nanofillers

    NASA Astrophysics Data System (ADS)

    Rastogi, Monisha; Vaish, Rahul

    2015-05-01

    The present work aims to investigate the phase transition, dispersion and diffusion behavior of nanocomposites of carbon nanotube (CNT) and straight chain alkanes. These materials are potential candidates for organic phase change materials(PCMs) and have attracted flurry of research recently. Accurate experimental evaluation of the mass, thermal and transport properties of such composites is both difficult as well as economically taxing. Additionally it is crucial to understand the factors that results in modification or enhancement of their characteristic at atomic or molecular level. Classical molecular dynamics approach has been extended to elucidate the same. Bulk atomistic models have been generated and subjected to rigorous multistage equilibration. To reaffirm the approach, both canonical and constant-temperature, constant- pressure ensembles were employed to simulate the models under consideration. Explicit determination of kinetic, potential, non-bond and total energy assisted in understanding the enhanced thermal and transport property of the nanocomposites from molecular point of view. Crucial parameters including mean square displacement and simulated self diffusion coefficient precisely define the balance of the thermodynamic and hydrodynamic interactions. Radial distribution function also reflected the density variation, strength and mobility of the nanocomposites. It is expected that CNT functionalization could improve the dispersion within n-alkane matrix. This would further ameliorate the mass and thermal properties of the composite. Additionally, the determined density was in good agreement with experimental data. Thus, molecular dynamics can be utilized as a high throughput technique for theoretical investigation of nanocomposites PCMs.

  8. Variation in n-Alkane Distributions of Modern Plants: Questioning Applications of n-Alkanes in Chemotaxonomy and Paleoecology

    NASA Astrophysics Data System (ADS)

    Bush, R. T.; McInerney, F. A.

    2010-12-01

    Long chain n-alkanes (n-C21 to n-C37) are synthesized as part of the epicuticular leaf wax of terrestrial plants and are among the most recognizable and widely used plant biomarkers. n-Alkane distributions have been utilized in previous studies on modern plant chemotaxonomy, testing whether taxa can be identified based on characteristic n-alkane profiles. Dominant n-alkanes (e.g. n-C27 or n-C31) have also been ascribed to major plant groups (e.g. trees or grasses respectively) and have been used in paleoecology studies to reconstruct fluctuations in plant functional types. However, many of these studies have been based on relatively few modern plant data; with the wealth of modern n-alkane studies, a more comprehensive analysis of n-alkanes in modern plants is now possible and can inform the usefulness of n-alkane distributions as paleoecological indicators. The work presented here is a combination of measurements made using plant leaves collected from the Chicago Botanic Garden and a compilation of published literature data from six continents. We categorized plants by type: angiosperms, gymnosperms, woody plants, forbs, grasses, ferns and pteridophytes, and mosses. We then quantified n-alkane distribution parameters such as carbon preference index (CPI), average chain length (ACL), and dispersion (a measure of the spread of the profile over multiple chain lengths) and used these to compare plant groups. Among all plants, one of the emergent correlations is a decrease in dispersion with increasing CPI. Within and among plant groups, n-alkane distributions show a very large range of variation, and the results show little or no correspondence between broad plant groups and a single dominant n-alkane or a ratio of n-alkanes. These findings are true both when data from six continents are combined and when plants from a given region are compared (North America). We also compared the n-alkane distributions of woody angiosperms, woody gymnosperms, and grasses with one

  9. Tagging the Untaggable: A Difluoroalkyl-Sulfinate Ketone-Based Reagent for Direct C-H Functionalization of Bioactive Heteroarenes.

    PubMed

    Gnaim, Samer; Scomparin, Anna; Li, Xiuling; Baran, Phil S; Rader, Christoph; Satchi-Fainaro, Ronit; Shabat, Doron

    2016-09-21

    We have developed a new difluoroalkyl ketal sulfinate salt reagent suitable for direct derivatization of heteroarene C-H bonds. The reagent is capable of introducing a ketone functional group on heteroarene bioactive compounds via a one-pot reaction. Remarkably, in three examples the ketone analog and its parent drug had almost identical cytotoxicity. In a representative example, the ketone analog was bioconjugated with a delivery vehicle via an acid-labile semicarbazone linkage and with a photolabile protecting group to produce the corresponding prodrug. Controlled release of the drug-ketone analog was demonstrated in vitro for both systems. This study provides a general approach to obtain taggable ketone analogs directly from bioactive heteroarene compounds with limited options for conjugation. We anticipate that this sodium ketal-sulfinate reagent will be useful for derivatization of other heteroarene-based drugs to obtain ketone-taggable analogs with retained efficacy. PMID:27494153

  10. Diffusion of Benzene and Alkylbenzenes in n-Alkanes.

    PubMed

    Kowert, Bruce A; Register, Paul M

    2015-10-01

    The translational diffusion constants, D, of benzene and a series of alkylbenzenes have been determined in four n-alkanes at room temperature using capillary flow techniques. The alkylbenzenes are toluene, ethylbenzene, 1-phenylpropane, 1-phenylpentane, 1-phenyloctane, 1-phenylundecane, 1-phenyltetradecane, and 1-phenylheptadecane. The n-alkanes are n-nonane, n-decane, n-dodecane, and n-pentadecane. Ratios of the solutes' D values are independent of solvent and in general agreement with the predictions of diffusion models for cylinders and lollipops. For the latter, an alkylbenzene's phenyl ring is the lollipop's candy; the alkyl chain is its handle. A model that considers the solutes to be spheres with volumes determined by the van der Waals increments of their constituent atoms is not in agreement with experiment. The diffusion constants of 1-alkene and n-alkane solutes in n-alkane solvents also are compared with the cylinder model; reasonably good agreement is found. The n-alkanes are relatively extended, and this appears to be the case for the alkyl chains of the 1-alkenes and alkylbenzenes as well. PMID:26417941

  11. Surface freezing in binary alkane-alcohol mixtures

    SciTech Connect

    Ofer, E.; Sloutskin, E.; Tamam, L.; Deutsch, M.; Ocko, B. M.

    2006-08-15

    Surface freezing was detected and studied in mixtures of alcohol and alkane molecules, using surface tensiometry and surface-specific x-ray scattering methods. Considering that surface freezing in pure alkanes forms an ordered monolayer and in alcohols it forms an ordered bilayer, the length mismatch repulsion was minimized by varying the carbon number of the alkane component around 2n, where n is the carbon number of the alcohol molecule. A solutionlike behavior was found for all mixtures, where the ideal liquid mixture phase-separates upon freezing both in the bulk and the surface. The solid exhibits a herringbone crystalline phase below an alkane mole fraction {phi}{sub t}{approx_equal}0.8 and a rotator phase above it. The surface frozen film below {phi}{sub t} is an alkane monolayer exhibiting a next-nearest neighbor molecular tilt of a composition-dependent magnitude. Above {phi}{sub t}, no diffraction peaks were observed. This could be explained by the intrinsically shorter-range order of the rotator phase and a possible proliferation of defects.

  12. Reversible Interconversion between Alkanes, Alkenes, Alcohols and Ketones under Hydrothermal Conditions

    NASA Astrophysics Data System (ADS)

    Shipp, J.; Hartnett, H. E.; Gould, I. R.; Shock, E.; Williams, L. B.

    2011-12-01

    with the addition of methylbenzene products that are observed in a competing reaction, formed by dehydrogenation of the alkenes presumably via diene structures. The functional group interconversions were found to be completely reversible, with the exception of the methylbenzenes. Starting with these compounds gave no conversion to any other products. Significantly, we found that no carboxylic acids are formed, even though other products derived via carbon-carbon bond cleavage are observed. The experiments allow the stabilities and reactivities of the various functional groups to be inferred under these experimental conditions. The dienes are the least stable, followed by the alcohols, then the alkenes, the ketones, and finally the alkanes. The aromatic methylbenzenes are the least reactive and most stable under the experimental conditions. Therefore, using our reaction scheme and the relative reaction rate information, starting with any of the functional groups the direction(s) and most likely major products can be predicted.

  13. Merging Visible Light Photoredox Catalysis with Metal Catalyzed C-H Activations: On the Role of Oxygen and Superoxide Ions as Oxidants.

    PubMed

    Fabry, David C; Rueping, Magnus

    2016-09-20

    The development of efficient catalytic systems for direct aromatic C-H bond functionalization is a long-desired goal of chemists, because these protocols provide environmental friendly and waste-reducing alternatives to classical methodologies for C-C and C-heteroatom bond formation. A key challenge for these transformations is the reoxidation of the in situ generated metal hydride or low-valent metal complexes of the primary catalytic bond forming cycle. To complete the catalytic cycle and to regenerate the C-H activation catalyst, (super)stoichiometric amounts of Cu(II) or Ag(I) salts have often been applied. Recently, "greener" approaches have been developed by applying molecular oxygen in combination with Cu(II) salts, internal oxidants that are cleaved during the reaction, or solvents or additives enabling the metal hydride reoxidation. All these approaches improved the environmental friendliness but have not overcome the obstacles associated with the overall limited functional group and substrate tolerance. Hence, catalytic processes that do not feature the unfavorable aspects described above and provide products in a streamlined as well as economically and ecologically advantageous manner would be desirable. In this context, we decided to examine visible light photoredox catalysis as a new alternative to conventionally applied regeneration/oxidation procedures. This Account summarizes our recent advances in this expanding area and will highlight the new concept of merging distinct redox catalytic processes for C-H functionalizations through the application of visible light photoredox catalysis. Photoredox catalysis can be considered as catalytic electron-donating or -accepting processes, making use of visible-light absorbing homogeneous and heterogeneous metal-based catalysts, as well as organic dye sensitizers or polymers. As a consequence, photoredox catalysis is, in principle, an ideal tool for the recycling of any given metal catalyst via a coupled

  14. Merging Visible Light Photoredox Catalysis with Metal Catalyzed C-H Activations: On the Role of Oxygen and Superoxide Ions as Oxidants.

    PubMed

    Fabry, David C; Rueping, Magnus

    2016-09-20

    The development of efficient catalytic systems for direct aromatic C-H bond functionalization is a long-desired goal of chemists, because these protocols provide environmental friendly and waste-reducing alternatives to classical methodologies for C-C and C-heteroatom bond formation. A key challenge for these transformations is the reoxidation of the in situ generated metal hydride or low-valent metal complexes of the primary catalytic bond forming cycle. To complete the catalytic cycle and to regenerate the C-H activation catalyst, (super)stoichiometric amounts of Cu(II) or Ag(I) salts have often been applied. Recently, "greener" approaches have been developed by applying molecular oxygen in combination with Cu(II) salts, internal oxidants that are cleaved during the reaction, or solvents or additives enabling the metal hydride reoxidation. All these approaches improved the environmental friendliness but have not overcome the obstacles associated with the overall limited functional group and substrate tolerance. Hence, catalytic processes that do not feature the unfavorable aspects described above and provide products in a streamlined as well as economically and ecologically advantageous manner would be desirable. In this context, we decided to examine visible light photoredox catalysis as a new alternative to conventionally applied regeneration/oxidation procedures. This Account summarizes our recent advances in this expanding area and will highlight the new concept of merging distinct redox catalytic processes for C-H functionalizations through the application of visible light photoredox catalysis. Photoredox catalysis can be considered as catalytic electron-donating or -accepting processes, making use of visible-light absorbing homogeneous and heterogeneous metal-based catalysts, as well as organic dye sensitizers or polymers. As a consequence, photoredox catalysis is, in principle, an ideal tool for the recycling of any given metal catalyst via a coupled

  15. OH-initiated heterogeneous oxidation of cholestane: a model system for understanding the photochemical aging of cyclic alkane aerosols.

    PubMed

    Zhang, Haofei; Ruehl, Christopher R; Chan, Arthur W H; Nah, Theodora; Worton, David R; Isaacman, Gabriel; Goldstein, Allen H; Wilson, Kevin R

    2013-11-27

    Aerosols containing aliphatic hydrocarbons play a substantial role in the urban atmosphere. Cyclic alkanes constitute a large fraction of aliphatic hydrocarbon emissions originating from incomplete combustion of diesel fuel and motor oil. In the present study, cholestane (C27H48) is used as a model system to examine the OH-initiated heterogeneous oxidation pathways of cyclic alkanes in a photochemical flow tube reactor. Oxidation products are collected on filters and analyzed by a novel soft ionization two-dimensional gas chromatography/mass spectrometry technique. The analysis reveals that the first-generation functionalization products (cholestanones, cholestanals, and cholestanols) are the dominant reaction products that account for up to 70% by mass of the total speciated compounds. The ratio of first-generation carbonyls to alcohols is near unity at every oxidation level. Among the cholestanones/cholestanals, 55% are found to have the carbonyl group on the rings of the androstane skeleton, while 74% of cholestanols have the hydroxyl group on the rings. Particle-phase oxidation products with carbon numbers less than 27 (i.e., "fragmentation products") and higher-generation functionalization products are much less abundant. Carbon bond cleavage was found to occur only on the side chain. Tertiary-carbon alkoxy radicals are suggested to play an important role in governing both the distribution of functionalization products (via alkoxy radical isomerization and reaction with oxygen) and the fragmentation products (via alkoxy radical decomposition). These results provide new insights into the oxidation mechanism of cyclic alkanes.

  16. OH-initiated heterogeneous oxidation of cholestane: a model system for understanding the photochemical aging of cyclic alkane aerosols.

    PubMed

    Zhang, Haofei; Ruehl, Christopher R; Chan, Arthur W H; Nah, Theodora; Worton, David R; Isaacman, Gabriel; Goldstein, Allen H; Wilson, Kevin R

    2013-11-27

    Aerosols containing aliphatic hydrocarbons play a substantial role in the urban atmosphere. Cyclic alkanes constitute a large fraction of aliphatic hydrocarbon emissions originating from incomplete combustion of diesel fuel and motor oil. In the present study, cholestane (C27H48) is used as a model system to examine the OH-initiated heterogeneous oxidation pathways of cyclic alkanes in a photochemical flow tube reactor. Oxidation products are collected on filters and analyzed by a novel soft ionization two-dimensional gas chromatography/mass spectrometry technique. The analysis reveals that the first-generation functionalization products (cholestanones, cholestanals, and cholestanols) are the dominant reaction products that account for up to 70% by mass of the total speciated compounds. The ratio of first-generation carbonyls to alcohols is near unity at every oxidation level. Among the cholestanones/cholestanals, 55% are found to have the carbonyl group on the rings of the androstane skeleton, while 74% of cholestanols have the hydroxyl group on the rings. Particle-phase oxidation products with carbon numbers less than 27 (i.e., "fragmentation products") and higher-generation functionalization products are much less abundant. Carbon bond cleavage was found to occur only on the side chain. Tertiary-carbon alkoxy radicals are suggested to play an important role in governing both the distribution of functionalization products (via alkoxy radical isomerization and reaction with oxygen) and the fragmentation products (via alkoxy radical decomposition). These results provide new insights into the oxidation mechanism of cyclic alkanes. PMID:24152093

  17. Blue-shift of the C-H stretching vibration in CHF3-H2O complex: Matrix isolation infrared spectroscopy and ab initio computations

    NASA Astrophysics Data System (ADS)

    Gopi, R.; Ramanathan, N.; Sundararajan, K.

    2016-09-01

    As a result of hydrogen bonding in CHF3-H2O complex, ab initio computations exhibited a blue shift in the C-H stretching region of CHF3 sub-molecule. In this work, we have investigated whether the blue-shifting in CHF3-H2O complex can be experimentally discerned using matrix isolation infrared spectroscopy. The 1:1 CHF3-H2O complex was therefore trapped and studied in argon and neon matrices. Experimentally a blue shift of 20.3 and 32.3 cm-1 in the C-H stretching region of CHF3 sub-molecule for the CHF3-H2O complex was observed in argon and neon matrices. The structure of the complex and the energies were computed at MP2 level of theory using a 6-311++G(d,p) and aug-cc-pVDZ basis sets. Computations indicated only one minimum corresponded to a C-H⋯O interaction between the hydrogen of fluoroform and oxygen of water. AIM and NBO analyses were performed to understand the reasons for blue-shifting of the C-H stretching wavenumber in the complex.

  18. N-Acyl Amino Acid Ligands for Ruthenium(II)-Catalyzed meta-C-H tert-Alkylation with Removable Auxiliaries.

    PubMed

    Li, Jie; Warratz, Svenja; Zell, Daniel; De Sarkar, Suman; Ishikawa, Eloisa Eriko; Ackermann, Lutz

    2015-11-01

    Acylated amino acid ligands enabled ruthenium(II)-catalyzed C-H functionalizations with excellent levels of meta-selectivity. The outstanding catalytic activity of the ruthenium(II) complexes derived from monoprotected amino acids (MPAA) set the stage for the first ruthenium-catalyzed meta-functionalizations with removable directing groups. Thereby, meta-alkylated anilines could be accessed, which are difficult to prepare by other means of direct aniline functionalizations. The robust nature of the versatile ruthenium(II)-MPAA was reflected by challenging remote C-H transformations with tertiary alkyl halides on aniline derivatives as well as on pyridyl-, pyrimidyl-, and pyrazolyl-substituted arenes. Detailed mechanistic studies provided strong support for an initial reversible C-H ruthenation, followed by a SET-type C-Hal activation through homolytic bond cleavage. Kinetic analyses confirmed this hypothesis through an unusual second-order dependence of the reaction rate on the ruthenium catalyst concentration. Overall, this report highlights the exceptional catalytic activity of ruthenium complexes derived from acylated amino acids, which should prove instrumental for C-H activation chemistry beyond remote functionalization.

  19. Bond Issues.

    ERIC Educational Resources Information Center

    Pollack, Rachel H.

    2000-01-01

    Notes trends toward increased borrowing by colleges and universities and offers guidelines for institutions that are considering issuing bonds to raise money for capital projects. Discussion covers advantages of using bond financing, how use of bonds impacts on traditional fund raising, other cautions and concerns, and some troubling aspects of…

  20. Sticker Bonding.

    ERIC Educational Resources Information Center

    Frazier, Laura Corbin

    2000-01-01

    Introduces a science activity on the bonding of chemical compounds. Assigns students the role of either a cation or anion and asks them to write the ions they may bond with. Assesses students' understanding of charge, bonding, and other concepts. (YDS)

  1. Ni nanoparticle catalyzed growth of MWCNTs on Cu NPs @ a-C:H substrate

    NASA Astrophysics Data System (ADS)

    Ghodselahi, T.; Solaymani, S.; Akbarzadeh Pasha, M.; Vesaghi, M. A.

    2012-11-01

    NiCu NPs @ a-C:H thin films with different Cu content were prepared by co-deposition by RF-sputtering and RF-plasma enhanced chemical vapor deposition (RF-PECVD) from acetylene gas and Cu and Ni targets. The prepared samples were used as catalysts for growing multi-wall carbon nanotubes (MWCNTs) from liquid petroleum gas (LPG) at 825 °C by thermal chemical vapor deposition (TCVD). By addition of Cu NPs @ a-C:H thin layer as substrate for Ni NPs catalyst, the density of the grown CNTs is greatly enhanced in comparison to bare Si substrate. Furthermore the average diameter of the grown CNTs decreases by decreasing of Cu content of Cu NPs @ a-C:H thin layer. However Cu NPs @ a-C:H by itself has no catalytic property in MWCNTs growth. Morphology and electrical and optical properties of Cu NPs @ a-C:H thin layer is affected by Cu content and each of them is effective parameter on growth of MWCNTs based on Ni NPs catalyst. Moreover, adding of a low amount of Ni NPs doesn't vary optical, electrical and morphology properties of Cu NPs @ a-C:H thin layer but it has a profound effect on its catalytic activity. Finally the density and diameter of MWCNTs can be optimized by selection of the Cu NPs @ a-C:H thin layer as substrate of Ni NPs.

  2. Infrared spectroscopy and Density Functional Theory of crystalline β-2,4,6,8,10,12-hexanitrohexaaziosowurtzitane (β CL-20) in the region of its C-H stretching vibrations

    NASA Astrophysics Data System (ADS)

    Behler, K. D.; Pesce-Rodriguez, R.; Cabalo, J.; Sausa, R.

    2013-10-01

    Molecular vibrational spectroscopy provides a useful tool for material characterization and model verification. We examine the CH stretching fundamental and overtones of energetic material β-2,4,6,8,10,12-hexanitrohexaaziosowurtzitane (β-CL-20) by Raman spectroscopy, Fourier Transform Infrared Spectroscopy, and Laser Photoacoustic Overtone Spectroscopy, and utilize Density Functional Theory to calculate the C-H bond energy of β-CL-20 in a crystal. The spectra reveal four intense and distinct features, whose analysis yields C-H stretching fundamental frequencies and anharmonicity values that range from 3137 to 3170 cm-1 and 53.8 to 58.8 cm-1, respectively. From these data, we estimate an average value of 42,700 cm-1 (5.29 eV) for the C-H bond energy, a value that agrees with our quantum mechanical calculations.

  3. Infrared spectroscopy and Density Functional Theory of crystalline β-2,4,6,8,10,12-hexanitrohexaaziosowurtzitane (β CL-20) in the region of its C-H stretching vibrations.

    PubMed

    Behler, K D; Pesce-Rodriguez, R; Cabalo, J; Sausa, R

    2013-10-01

    Molecular vibrational spectroscopy provides a useful tool for material characterization and model verification. We examine the CH stretching fundamental and overtones of energetic material β-2,4,6,8,10,12-hexanitrohexaaziosowurtzitane (β-CL-20) by Raman spectroscopy, Fourier Transform Infrared Spectroscopy, and Laser Photoacoustic Overtone Spectroscopy, and utilize Density Functional Theory to calculate the C-H bond energy of β-CL-20 in a crystal. The spectra reveal four intense and distinct features, whose analysis yields C-H stretching fundamental frequencies and anharmonicity values that range from 3137 to 3170 cm(-1) and 53.8 to 58.8 cm(-1), respectively. From these data, we estimate an average value of 42,700 cm(-1) (5.29 eV) for the C-H bond energy, a value that agrees with our quantum mechanical calculations. PMID:23832164

  4. Systematic study of aggregation structure and thermal behavior of a series of unique H-shape alkane molecules.

    PubMed

    Yamamoto, Hiroko; Tashiro, Kohji; Nemoto, Norio; Motoyama, Yukihiro; Takahashi, Yoshiaki

    2011-08-11

    The H-shape alkanes of various arm lengths have been synthesized successfully through the Grignard reaction. The detailed investigation of these novel compounds may allow us to widen the topological chemistry field furthermore. The molecular form and molecular packing structure in the crystal lattice have been revealed successfully on the basis of X-ray structure analysis as well as the analysis of Raman longitudinal acoustic modes (LAM) sensitive to the alkyl zigzag chain segments. The molecular conformation in the crystal lattice is deformed markedly from the originally imagined H-shape. In the cases of C3HOH to C6HOH, for example, the molecules are packed in a complicated manner and the OH···O hydrogen bonds govern the whole intermolecular interactions mainly. Since the alkyl segmental length is not very long, the conformational change is not very drastic, i.e., the small configurational entropy. Synergic effect of the hydrogen bonds and the small configurational entropy gives the higher melting point as known from the thermal data. On the other hand, in the cases of C10HOH and C12HOH, one of the long alkyl chain arms is found to be bent by 90° so that all of the alky chain segments of planar-zigzag conformation can be packed as closely as possible, and the intermolecular OH···O hydrogen bonds are also formed effectively without any mistake. As a result, the contribution of nonbonded intra- and intermolecular van der Waals interactions between the trans-zigzag alkyl chain segments become major, and the coupling of this enthalpy effect with the larger configurational entropy effect of the molecular shape results in the decrement of the melting point which approaches gradually that of longer n-alkane compound. In this way a sensitive balance between the nonbonded van der Waals interactions, the OH···O hydrogen bonds, as well as the configurational entropy effect gives the characteristic thermal behavior of the H-shape compounds. The thus

  5. Microbial production of short-chain alkanes.

    PubMed

    Choi, Yong Jun; Lee, Sang Yup

    2013-10-24

    Increasing concerns about limited fossil fuels and global environmental problems have focused attention on the need to develop sustainable biofuels from renewable resources. Although microbial production of diesel has been reported, production of another much in demand transport fuel, petrol (gasoline), has not yet been demonstrated. Here we report the development of platform Escherichia coli strains that are capable of producing short-chain alkanes (SCAs; petrol), free fatty acids (FFAs), fatty esters and fatty alcohols through the fatty acyl (acyl carrier protein (ACP)) to fatty acid to fatty acyl-CoA pathway. First, the β-oxidation pathway was blocked by deleting the fadE gene to prevent the degradation of fatty acyl-CoAs generated in vivo. To increase the formation of short-chain fatty acids suitable for subsequent conversion to SCAs in vivo, the activity of 3-oxoacyl-ACP synthase (FabH), which is inhibited by unsaturated fatty acyl-ACPs, was enhanced to promote the initiation of fatty acid biosynthesis by deleting the fadR gene; deletion of the fadR gene prevents upregulation of the fabA and fabB genes responsible for unsaturated fatty acids biosynthesis. A modified thioesterase was used to convert short-chain fatty acyl-ACPs to the corresponding FFAs, which were then converted to SCAs by the sequential reactions of E. coli fatty acyl-CoA synthetase, Clostridium acetobutylicum fatty acyl-CoA reductase and Arabidopsis thaliana fatty aldehyde decarbonylase. The final engineered strain produced up to 580.8 mg l(-1) of SCAs consisting of nonane (327.8 mg l(-1)), dodecane (136.5 mg l(-1)), tridecane (64.8 mg l(-1)), 2-methyl-dodecane (42.8 mg l(-1)) and tetradecane (8.9 mg l(-1)), together with small amounts of other hydrocarbons. Furthermore, this platform strain could produce short-chain FFAs using a fadD-deleted strain, and short-chain fatty esters by introducing the Acinetobacter sp. ADP1 wax ester synthase (atfA) and the E. coli mutant

  6. Aspects of C-H Activation in Metal Complexes Containing Sulfur Ligands

    SciTech Connect

    Rakowski-DuBois, Mary C.

    2004-10-08

    those of related Cp-molybdenum complexes with sulfide ligands, which also activate hydrogen, but generally form hydrosulfido products without H2S elimination. C-H and C-S Cleavage Reactions. New mononuclear Cp{prime}Re(dithiolate) complexes such as Cp{prime}ReCl2(SC2H4S), 1, have been prepared and characterized and have been found to display a very interesting range of reactions. The thermal reaction of 1 involves the dehydrogenation of the alkanedithiolate ligand to form Cp{prime}ReCl2(SCH=CHS), 2 as well as a competing elimination of olefin from the dithiolate ligand in 1. On the basic of kinetic and related studies, the mechanism is proposed to involve a sequential series of reactions. In the first reaction, the olefin extrusion is proposed to produce a reactive Re-disulfide or Re-bis(sulfido) intermediate, CpReCl2S2 which serves as an oxidant for the dithiolate complex 1. The ability of the bis sulfido complex to dehydrogenate hydrocarbons is a unique feature and several additional dehydrogenation reactions with this system have been characterized, including the oxidation of other dithiolate complexes, of tetrahydro-naphthalene and of cyclohexadiene. Precedents for the role of metal sulfides in dehydrogenation reactions have been reported for heterogeneous metal sulfide surfaces. This work has begun to provide information about the electronic and structural features necessary for such reactivity. Carbon Sulfur Bond Formation. When the thermal reaction of 1 was carried out in the presence of excess dry ethene a new reaction was observed in which the dithiolate ligand is displaced by incoming olefin to form the cyclic organic product, 1,4-dithiane. The Re product is identified as Cp{prime}Re(alkene)Cl2 on the basis of NMR and mass spectroscopic data. Similar reactions with alkynes have been found to form unsaturated 6-membered rings and reactions with 1,3 dithiolate complexes form the organic 7-membered rings. To our knowledge the formation of cyclic bis-thioethers by

  7. Alkanes in shrimp from the Buccaneer Oil Field

    SciTech Connect

    Middleditch, B.S.; Basile, B.; Chang, E.S.

    1982-07-01

    A total of 36 samples of shrimp were examined from the region of the Buccaneer oil field, eighteen of which were representatives of the commercial species Penaeus aztecus and the rest were various other species: Penaeus duorarum (pink shrimp), Trachypenaeus duorarum (sugar shrimp), Squilla empusa (mantis shrimp), and Sicyonia dorsalis (chevron shrimp). The alkanes and deuteriated alkanes were completely separated by GC, so a mass spectrometer was not required for their detection and quantitation. To confirm the identities of individual compounds, however, some samples were examined by combined gas chromatography-mass spectrometry. Results show that only thirteen of the forty shrimp collected from the region of the Buccaneer oil field contained petroleum alkanes, and the majority of these were obtained from trawls immediately adjacent to the production platforms. It appears that shrimp caught in the region of the Buccaneer oil field are not appreciably tainted with hydrocarbons discharged from the production platforms. (JMT)

  8. High Temperature Chemical Kinetic Combustion Modeling of Lightly Methylated Alkanes

    SciTech Connect

    Sarathy, S M; Westbrook, C K; Pitz, W J; Mehl, M

    2011-03-01

    Conventional petroleum jet and diesel fuels, as well as alternative Fischer-Tropsch (FT) fuels and hydrotreated renewable jet (HRJ) fuels, contain high molecular weight lightly branched alkanes (i.e., methylalkanes) and straight chain alkanes (n-alkanes). Improving the combustion of these fuels in practical applications requires a fundamental understanding of large hydrocarbon combustion chemistry. This research project presents a detailed high temperature chemical kinetic mechanism for n-octane and three lightly branched isomers octane (i.e., 2-methylheptane, 3-methylheptane, and 2,5-dimethylhexane). The model is validated against experimental data from a variety of fundamental combustion devices. This new model is used to show how the location and number of methyl branches affects fuel reactivity including laminar flame speed and species formation.

  9. Thermal decomposition of n-alkanes under supercritical conditions

    SciTech Connect

    Yu, J.; Eser, S.

    1996-10-01

    The future aircraft fuel system may be operating at temperatures above the critical points of fuels. Currently there is very limited information on the thermal stability of hydrocarbon fuels under supercritical conditions. In this work, the thermal stressing experiments of n-decane, n-dodecane, n-tetradecane, their mixtures, and an n-paraffin mixture, Norpar-13, was carried out under supercritical conditions. The experimental results indicated that the thermal decomposition of n-alkanes can be represented well by the first-order kinetics. Pressure has significant effects on the first-order rate constant and product distribution in the near-critical region. The major products are a series of n-alkanes and 1-alkenes. The relative yields of n-alkanes and 1-alkenes depend on the reaction conditions. The first-order rate constants for the thermal decomposition of individual compounds in a mixture are different from those obtained for the decomposition of pure compounds.

  10. Surface crystallization in normal-alkanes and alcohols

    SciTech Connect

    Deutsch, M.; Ocko, B.M.; Wu, X.Z. |; Sirota, E.B.; Sinha, S.K.

    1995-06-01

    A new, rare surface freezing, phenomenon is observed in molten normal-alkanes and their derivatives (alcohols, thiols, etc.). X-ray and surface tension measurements show the formation of a crystalline monolayer on the surface of the liquid alkane at temperatures up to 3 C above the bulk solidification temperature, T{sub f}. For alcohols, a single bilayer is formed. In both cases, the molecules in the layer are hexagonally packed and oriented normal to the surface for short chain lengths, and tilted for long ones. In both cases the single layer persists down to T{sub f}. In terms of wetting theory, this constitutes a very limited partial wetting of the liquid surface by the crystalline layer. The new surface phase is obtained only for chain lengths 14 < n {le} 50 in alkanes, and 16 < n < 30 in alcohols. The measurements are satisfactorily accounted for within a simple theory based on surface energy considerations.

  11. Alkanes and alkenes conversion to high octane gasoline

    SciTech Connect

    Harandi, M.N.; Owen, H.

    1989-07-25

    This patent describes a process for the conversion of lower alkane and alkene hydrocarbons to high octane gasoline. It comprises: contacting a hydrocarbon feedstock comprising lower alkanes and alkenes with a fluidized bed of acidic, shape selective metallosiliate catalyst in a first conversion zone under high temperature alkane conversion conditions wherein the feedstock contains an amount of lower alkene sufficient to provide an exotherm sufficient to maintain near isothermal reaction conditions whereby an effluent stream is produced comprising higher aliphatic hydrocarbons rich in aromatics; contacting the effluent stream with a fluidized bed of acidic, medium pore metallosilicate catalyst in a second conversion zone at moderate temperature under oligonerization and alkylation conditions whereby a C/sub 5/ + gasoline boiling range product is produced rich in alkylated aromatics.

  12. Opportunities and challenges for direct C-H functionalization of piperazines.

    PubMed

    Ye, Zhishi; Gettys, Kristen E; Dai, Mingji

    2016-01-01

    Piperazine ranks within the top three most utilized N-heterocyclic moieties in FDA-approved small-molecule pharmaceuticals. Herein we summarize the current synthetic methods available to perform C-H functionalization on piperazines in order to lend structural diversity to this privileged drug scaffold. Multiple approaches such as those involving α-lithiation trapping, transition-metal-catalyzed α-C-H functionalizations, and photoredox catalysis are discussed. We also highlight the difficulties experienced when successful methods for α-C-H functionalization of acyclic amines and saturated mono-nitrogen heterocyclic compounds (such as piperidines and pyrrolidines) were applied to piperazine substrates. PMID:27340462

  13. Red-Shifting versus Blue-Shifting Hydrogen Bonds: Perspective from Ab Initio Valence Bond Theory.

    PubMed

    Chang, Xin; Zhang, Yang; Weng, Xinzhen; Su, Peifeng; Wu, Wei; Mo, Yirong

    2016-05-01

    Both proper, red-shifting and improper, blue-shifting hydrogen bonds have been well-recognized with enormous experimental and computational studies. The current consensus is that there is no difference in nature between these two kinds of hydrogen bonds, where the electrostatic interaction dominates. Since most if not all the computational studies are based on molecular orbital theory, it would be interesting to gain insight into the hydrogen bonds with modern valence bond (VB) theory. In this work, we performed ab initio VBSCF computations on a series of hydrogen-bonding systems, where the sole hydrogen bond donor CF3H interacts with ten hydrogen bond acceptors Y (═NH2CH3, NH3, NH2Cl, OH(-), H2O, CH3OH, (CH3)2O, F(-), HF, or CH3F). This series includes four red-shifting and six blue-shifting hydrogen bonds. Consistent with existing findings in literature, VB-based energy decomposition analyses show that electrostatic interaction plays the dominating role and polarization plays the secondary role in all these hydrogen-bonding systems, and the charge transfer interaction, which denotes the hyperconjugation effect, contributes only slightly to the total interaction energy. As VB theory describes any real chemical bond in terms of pure covalent and ionic structures, our fragment interaction analysis reveals that with the approaching of a hydrogen bond acceptor Y, the covalent state of the F3C-H bond tends to blue-shift, due to the strong repulsion between the hydrogen atom and Y. In contrast, the ionic state F3C(-) H(+) leads to the red-shifting of the C-H vibrational frequency, owing to the attraction between the proton and Y. Thus, the relative weights of the covalent and ionic structures essentially determine the direction of frequency change. Indeed, we find the correlation between the structural weights and vibrational frequency changes. PMID:27074500

  14. Red-Shifting versus Blue-Shifting Hydrogen Bonds: Perspective from Ab Initio Valence Bond Theory.

    PubMed

    Chang, Xin; Zhang, Yang; Weng, Xinzhen; Su, Peifeng; Wu, Wei; Mo, Yirong

    2016-05-01

    Both proper, red-shifting and improper, blue-shifting hydrogen bonds have been well-recognized with enormous experimental and computational studies. The current consensus is that there is no difference in nature between these two kinds of hydrogen bonds, where the electrostatic interaction dominates. Since most if not all the computational studies are based on molecular orbital theory, it would be interesting to gain insight into the hydrogen bonds with modern valence bond (VB) theory. In this work, we performed ab initio VBSCF computations on a series of hydrogen-bonding systems, where the sole hydrogen bond donor CF3H interacts with ten hydrogen bond acceptors Y (═NH2CH3, NH3, NH2Cl, OH(-), H2O, CH3OH, (CH3)2O, F(-), HF, or CH3F). This series includes four red-shifting and six blue-shifting hydrogen bonds. Consistent with existing findings in literature, VB-based energy decomposition analyses show that electrostatic interaction plays the dominating role and polarization plays the secondary role in all these hydrogen-bonding systems, and the charge transfer interaction, which denotes the hyperconjugation effect, contributes only slightly to the total interaction energy. As VB theory describes any real chemical bond in terms of pure covalent and ionic structures, our fragment interaction analysis reveals that with the approaching of a hydrogen bond acceptor Y, the covalent state of the F3C-H bond tends to blue-shift, due to the strong repulsion between the hydrogen atom and Y. In contrast, the ionic state F3C(-) H(+) leads to the red-shifting of the C-H vibrational frequency, owing to the attraction between the proton and Y. Thus, the relative weights of the covalent and ionic structures essentially determine the direction of frequency change. Indeed, we find the correlation between the structural weights and vibrational frequency changes.

  15. Adsorption of linear alkanes on Cu(111): Temperature and chain-length dependence of the softened vibrational mode

    NASA Astrophysics Data System (ADS)

    Fosser, Kari A.; Kang, Joo H.; Nuzzo, Ralph G.; Wöll, Christof

    2007-05-01

    The vibrational spectra of linear alkanes, with lengths ranging from n-propane to n-octane, were examined on a copper surface by reflection-absorption infrared spectroscopy. The appearance and frequency of the "soft mode," a feature routinely seen in studies of saturated hydrocarbons adsorbed on metals, were examined and compared between the different adsorbates. The frequency of the mode was found to be dependent on both the number of methylene units of each alkane as well as specific aspects of the order of the monolayer phase. Studies of monolayer coverages at different temperatures provide insights into the nature of the two-dimensional (2D) melting transitions of these adlayer structures, ones that can be inferred from observed shifts in the soft vibrational modes appearing in the C-H stretching region of the infrared spectrum. These studies support recently reported hypotheses as to the origins of such soft modes: the metal-hydrogen interactions that mediate them and the dynamics that underlay their pronounced temperature dependencies. The present data strongly support a model for the 2D to one-dimensional order-order phase transition arising via a continuous rather than discrete first-order process.

  16. Recent advances in C(sp3)–H bond functionalization via metal–carbene insertions

    PubMed Central

    Wang, Bo; Qiu, Di; Zhang, Yan

    2016-01-01

    Summary The recent development of intermolecular C–H insertion in the application of C(sp3)–H bond functionalizations, especially for light alkanes, is reviewed. The challenging problem of regioselectivity in C–H bond insertions has been tackled by the use of sterically bulky metal catalysts, such as metal porphyrins and silver(I) complexes. In some cases, high regioselectivity and enantioselectivity have been achieved in the C–H bond insertion of small alkanes. This review highlights the most recent accomplishments in this field. PMID:27340470

  17. Catalytic, mild, and selective oxyfunctionalization of linear alkanes: current challenges.

    PubMed

    Bordeaux, Mélanie; Galarneau, Anne; Drone, Jullien

    2012-10-22

    Selective catalysts for sustainable oxidation of alkanes are highly demanded because of the abundance of these molecules in the environment, the possibility to transform them into higher-value compounds, such as chemicals or synthetic fuels, and the fact that, kinetically speaking, this is a difficult reaction. Numerous chemical and biological catalysts have been developed in the lasts decades for this purpose, rendering the overview over this field of chemistry difficult. After giving a definition of the ideal catalyst for alkane oxyfunctionalization, this review aims to present the catalysts available today that are closest to ideal.

  18. Assimilation of chlorinated alkanes by hydrocarbon-utilizing fungi

    SciTech Connect

    Murphy, G.L.; Perry, J.J.

    1984-12-01

    The fatty acid compositions of two filamentous fungi (Cunninghamella elegans and Penicillium zonatum) and a yeast (Candida lipolytica) were determined after the organisms were grown on 1-chlorohexadecane or 1-chlorooctadecane. These organisms utilized the chlorinated alkanes as sole sources of carbon and energy. Analyses of the fatty acids present after growth on the chlorinated alkanes indicated that 60 to 70% of the total fatty acids in C. elegans were chlorinated. Approximately 50% of the fatty acids in C. lipolytica were also chlorinated. P. zonatum contained 20% 1-chlorohexadecanoic acid after growth on either substrate but did not incorporate C/sub 18/ chlorinated fatty acids.

  19. Regioselective alkane hydroxylation with a mutant AlkB enzyme

    DOEpatents

    Koch, Daniel J.; Arnold, Frances H.

    2012-11-13

    AlkB from Pseudomonas putida was engineered using in-vivo directed evolution to hydroxylate small chain alkanes. Mutant AlkB-BMO1 hydroxylates propane and butane at the terminal carbon at a rate greater than the wild-type to form 1-propanol and 1-butanol, respectively. Mutant AlkB-BMO2 similarly hydroxylates propane and butane at the terminal carbon at a rate greater than the wild-type to form 1-propanol and 1-butanol, respectively. These biocatalysts are highly active for small chain alkane substrates and their regioselectivity is retained in whole-cell biotransformations.

  20. Modeling of alkane emissions from a wood stain

    SciTech Connect

    Chang, J.C.S.; Guo, Z.

    1993-01-01

    The article discusses full-scale residential house tests to evaluate the effects of organic emissions from a wood finishing product--wood stain--on indoor air quality (IAQ). The test house concentrations of three alkane species, nonane, decane, and undecane, were measured as a function of time after the application of the wood stain. It was found that the test house concentrations can be simulated by an integrated IAQ model which takes into consideration source, sink, and ventilation effects. The alkane emissions were controlled by an evaporation-like process.

  1. Synthesis of Dihydropyridines and Pyridines from Imines and Alkynes via C-H Activation

    SciTech Connect

    Ellman, Jonathan A.; Colby, Denise; Bergman, Robert

    2007-11-20

    A convenient one-pot C-H alkenylation/electrocyclization/aromatization sequence has been developed for the synthesis of highly substituted pyridine derivatives from alkynes and {alpha},{beta}-unsaturated N-benzyl aldimines and ketimines that proceeds through dihydropyridine intermediates. A new class of ligands for C-H activation was developed, providing broader scope for the alkenylation step than could be achieved with previously reported ligands. Substantial information was obtained about the mechanism of the reaction. This included the isolation of a C-H activated complex and its structure determination by X-ray analysis; in addition, kinetic simulations using the Copasi software were employed to determine rate constants for this transformation, implicating facile C-H oxidative addition and slow reductive elimination steps.

  2. Synthesis of indoles and tryptophan derivatives via photoinduced nitrene C-H insertion.

    PubMed

    Junk, Lukas; Kazmaier, Uli

    2016-03-14

    Functionalized indoles and tryptophans can be obtained from stannylated alkenes and o-iodoanilines via Stille coupling. Subsequent azidation and photochemical nitrene generation results in the formation of the heterocyclic ring systems via C-H insertion. PMID:26869211

  3. Generation of benzyne from benzoic acid using C-H activation.

    PubMed

    Cant, Alastair A; Roberts, Lee; Greaney, Michael F

    2010-12-01

    ortho C-H activation of benzoic acids with Pd(II) generates an oxapalladacycle that can decarboxylate to produce a palladium-associated aryne. The arynes then undergo [2+2+2] trimerisation to afford triphenylenes.

  4. Thiyl radical reaction with thymine: absolute rate constant for hydrogen abstraction and comparison to benzylic C-H bonds.

    PubMed

    Nauser, Thomas; Schöneich, Christian

    2003-09-01

    Free radical damage of DNA is a well-known process affecting biological tissue under conditions of oxidative stress. Thiols can repair DNA-derived radicals. However, the product thiyl radicals may also cause biological damage. To obtain quantitative information on the potential reactivity with DNA components, we measured the rate constant for hydrogen abstraction by cysteamine thiyl radicals from thymine C5-CH(3), k = (1.2 +/- 0.8) x 10(4) M(-1) s(-1), and thymidine-5'-monophosphate, k = (0.9 +/- 0.6) x 10(4) M(-1) s(-1). Hence, the hydrogen abstraction from C5-CH(3) occurs with rate constants similar to the hydrogen abstraction from the carbohydrate moieties. Especially at low oxygen concentration such as that found in skeletal muscle, such hydrogen abstraction processes by thiyl radicals may well compete against other dioxygen-dependent reactions. The rate constants for hydrogen abstraction at thymine C5-CH(3) were compared to those with benzylic substrates, toluenesulfonic acid, and benzyl alcohol.

  5. Direct, copper-catalyzed oxidation of aromatic C-H bonds with hydrogen peroxide under acid-free conditions.

    PubMed

    Conde, Ana; Díaz-Requejo, M Mar; Pérez, Pedro J

    2011-07-28

    The direct oxidation of benzene into phenol using hydrogen peroxide has been achieved in the absence of any acid with Tp(x)Cu(NCMe) complexes as the catalysts. In the case of anthracenes as the substrates, valuable anthraquinones have been quantitatively obtained in the same manner.

  6. Short Synthesis of Sulfur Analogues of Polyaromatic Hydrocarbons through Three Palladium-Catalyzed C-H Bond Arylations.

    PubMed

    Hagui, Wided; Besbes, Néji; Srasra, Ezzeddine; Roisnel, Thierry; Soulé, Jean-François; Doucet, Henri

    2016-09-01

    An expeditious synthesis of a wide range of phenanthro[9,10-b]thiophene derivatives, which are a class of polyaromatic hydrocarbon (PAH) containing a sulfur atom, is reported. The synthetic scheme involves only two operations from commercially available thiophenes, 2-bromobenzenesulfonyl chlorides and aryl bromides. In the first step, palladium-catalyzed desulfitative arylation using 2-bromobenzenesulfonyl chlorides allows the synthesis of thiophene derivatives, which are substituted at the C4 position by an aryl group containing an ortho-bromo substituent. Then, a palladium-catalyzed one-pot cascade intermolecular C5-arylation of thiophene using aryl bromides followed by intramolecular arylation led to the corresponding phenanthro[9,10-b]thiophenes in a single operation. In addition, PAHs containing two or three sulfur atoms, as well as both sulfur and nitrogen atoms, were also designed by this strategy. PMID:27550151

  7. Rh(I)-Catalyzed Arylation of Heterocycles via C-H Bond Activation: Expanded Scope Through Mechanistic Insight

    SciTech Connect

    Lewis, Jared; Berman, Ashley; Bergman, Robert; Ellman, Jonathan

    2007-07-18

    A practical, functional group tolerant method for the Rh-catalyzed direct arylation of a variety of pharmaceutically important azoles with aryl bromides is described. Many of the successful azole and aryl bromide coupling partners are not compatible with methods for the direct arylation of heterocycles using Pd(0) or Cu(I) catalysts. The readily prepared, low molecular weight ligand, Z-1-tert-butyl-2,3,6,7-tetrahydrophosphepine, which coordinates to Rh in a bidentate P-olefin fashion to provide a highly active yet thermally stable arylation catalyst, is essential to the success of this method. By using the tetrafluoroborate salt of the corresponding phosphonium, the reactions can be assembled outside of a glove box without purification of reagents or solvent. The reactions are also conducted in THF or dioxane, which greatly simplifies product isolation relative to most other methods for direct arylation of azoles employing high-boiling amide solvents. The reactions are performed with heating in a microwave reactor to obtain excellent product yields in two hours.

  8. Double C-H bond activation of hydrocarbons by a gas phase neutral oxide cluster: the importance of spin state.

    PubMed

    Wang, Zhe-Chen; Yin, Shi; Bernstein, Elliot R

    2013-03-21

    The neutral cluster V2O5 is generated and detected in the gas phase. Its reactivity toward butane is studied both experimentally and theoretically. Experimental results show clearly that neutral V2O5 can react with n-butane (C4H10) to generate V2O5H2, indicating double hydrogen atom transfer from C4H10 to V2O5 to produce C4H8. Further experimental evidence indicates that V2O5 is only partially reacted even at very high concentrations of C4H10. Density functional theory (DFT) studies show that the lowest energy triplet state of V2O5 is reactive toward C4H10, whereas the ground state singlet V2O5 is inert. Calculated results are in agreement with experimental findings, and a detailed reaction mechanism is provided. Reactions of V2O5H2 with several oxidants are also studied theoretically to find a path to regenerate V2O5. Neutral (3)V2O5 can also react with C2H6 to form V2O5H2 and C2H4, but only as a minor reaction channel; the major product is the adsorption product V2O5(C2H6). PMID:23441829

  9. H-H, C-H, and C-C NMR spin-spin coupling constants calculated by the FP-INDO method for aromatic hydrocarbons

    NASA Technical Reports Server (NTRS)

    Long, S. A. T.; Memory, J. D.

    1978-01-01

    The FP-INDO (finite perturbation-intermediate neglect of differential overlap) method is used to calculate the H-H, C-H, and C-C coupling constants in hertz for molecules of six different benzenoid hydrocarbons: benzene, naphthalene, biphenyl, anthracene, phenanthrene, and pyrene. The calculations are based on both the actual and the average molecular geometries. It is found that only the actual molecular geometries can always yield the correct relative order of values for the H-H coupling constants. For the calculated C-C coupling constants, as for the calculated C-H coupling constants, the signs are positive (negative) for an odd (even) number of bonds connecting the two nuclei. Agreements between the calculated and experimental values of the coupling constants for all six molecules are comparable to those reported previously for other molecules.

  10. Tuning the reactivity of an actor ligand for tandem CO2 and C-H activations: from spectator metals to metal-free.

    PubMed

    Annibale, Vincent T; Dalessandro, Daniel A; Song, Datong

    2013-10-30

    The 4,5-diazafluorenide ligand (L(-)) serves as an actor ligand in the formal insertion of CO2 into a C-H bond remote from the metal center. With the Ru(II) complex of L(-) as the starting point, Rh(III), Rh(I), and Cu(I) were used as spectator metal centers to tune the reactivity of the actor ligand toward CO2. In the case of Rh(III)-diazafluorenide a room temperature reversible activation of CO2 was observed, similar to the isoelectronic Ru(II) analogue. In the case of Rh(I)- and Cu(I)-diazafluorenide CO2 is trapped by the formation of dinuclear carboxylate complexes and diazafluorene (LH). The spectator metal center could even be replaced entirely with an organic group allowing for the first metal-free reversible tandem CO2 and C-H activation.

  11. IMPROVED BONDING METHOD

    DOEpatents

    Padgett, E.V. Jr.; Warf, D.H.

    1964-04-28

    An improved process of bonding aluminum to aluminum without fusion by ultrasonic vibrations plus pressure is described. The surfaces to be bonded are coated with an aqueous solution of alkali metal stearate prior to assembling for bonding. (AEC) O H19504 Present information is reviewed on steady state proliferation, differentiation, and maturation of blood cells in mammals. Data are cited from metabolic tracer studies, autoradiographic studies, cytologic studies, studies of hematopoietic response to radiation injuries, and computer analyses of blood cell production. A 3-step model for erythropoiesis and a model for granulocyte kinetics are presented. New approaches to the study of lymphocytopoiesis described include extracorporeal blood irradiation to deplete lymphocytic tissue without direct injury to the formative tissues as a means to study the stressed system, function control, and rates of proliferation. It is pointed out that present knowledge indicates that lymphocytes comprise a mixed family, with diverse life spans, functions, and migration patterns with apparent aimless recycling from modes to lymph to blood to nodes that has not yet been quantitated. Areas of future research are postulated. (70 references.) (C.H.)

  12. Copper-Catalyzed Oxidative C-H Amination of Tetrahydrofuran with Indole/Carbazole Derivatives.

    PubMed

    Yang, Qingjing; Choy, Pui Ying; Fu, Wai Chung; Fan, Baomin; Kwong, Fuk Yee

    2015-11-01

    A simple α-C-H amination of cyclic ether with indole/carbazole derivatives has been accomplished by employing copper(II) chloride/bipy as the catalyst system. In the presence of the di-tert-butyl peroxide oxidant, cyclic ethers such as tetrahydrofuran, 1,4-dioxane, and tetrahydropyran successfully undergo C-H/N-H cross dehydrogenative coupling (CDC) with various carbazole or indole derivatives in good-to-excellent yields. PMID:26485515

  13. Molecular complexity via C-H activation: a dehydrogenative Diels-Alder reaction.

    PubMed

    Stang, Erik M; White, M Christina

    2011-09-28

    Traditionally, C-H oxidation reactions install oxidized functionality onto a preformed molecular skeleton, resulting in a local molecular change. The use of C-H activation chemistry to construct complex molecular scaffolds is a new area with tremendous potential in synthesis. We report a Pd(II)/bis-sulfoxide-catalyzed dehydrogenative Diels-Alder reaction that converts simple terminal olefins into complex cycloadducts in a single operation.

  14. AgONO-assisted direct C-H arylation of heteroarenes with anilines.

    PubMed

    Gowrisankar, Saravanan; Seayad, Jayasree

    2014-09-26

    A novel copper-catalyzed C-H arylation of heteroarenes with anilines by an in situ diazonium reaction is established by using silver nitrite (AgONO) as an unconventional nitrosating reagent under acid-free conditions. It provides a complementary approach for the C-H arylation of electron-rich heteroarenes with aromatic amines affording a variety of heterobiaryls in moderate to good yields. PMID:25137410

  15. Weak hydrogen bridges: a systematic theoretical study on the nature and strength of C--H...F--C interactions.

    PubMed

    Hyla-Kryspin, Isabella; Haufe, Günter; Grimme, Stefan

    2004-07-19

    We present a comparative study on the nature and strength of weak hydrogen bonding between the C(sp3)-H, C(sp2)-H, and C(sp)-H donor bonds and F-C(sp3) acceptors. The series of molecules CH3F.CH4 (2 a, 2 b), CH3F.C2H4 (3), CH3F.C2H2 (4), as well as model complexes of experimentally characterized 2-fluoro-2-phenylcyclopropane derivatives, C3H6.C3H5F (5 a, 5 b) and C3H5F.C3H5F (6) were investigated. Comparative studies were also performed for two conformers of the methane dimer (1 a, 1 b). The calculations were carried out in hierarchies of basis sets [SV(d,p), TZV(d,p), aug-TZV(d,p), TZV(2df,2pd), aug-TZV(2df,2pd), QZV(3d2fg,2pd), aug-QZV(3d2fg,2pdf)] by means of ab initio [HF, MP2, QCISD, QCISD(T)] methods and density functional theory (DFT/B3LYP, DFT/PBE). It is shown that well-balanced basis sets of at least TZV(2df,2pd) quality are needed for a proper description of the weakly bonded systems. In the case of 2, 3, 5, and 6, the dispersion interaction is the dominant term of the entire attraction, which is not accounted for at the B3LYP level. Significant electrostatic contributions are observed for 6 and 3. For 4, these forces have a dominating contribution to the hydrogen bonding. The C(sp)--H...F--C(sp(3)) interaction in 4, though weak, exhibits the same characteristics as conventional hydrogen bridges. Despite showing longer H.F/H contacts compared to 1 a, 2 a, and 5 a the bifurcated structures, 1 b, 2 b, 5 b, are characterized by larger dispersion interactions leading to stronger bonding. For the systems with only one H.F contact, the MP2/QZV(3d2fg,2pd) interaction energy increases in the order 2 a (-1.62 kJ mol(-1)), 3 (-2.79 kJ mol(-1)), 5 a (-5.97 kJ mol(-1)), 4 (-7.25 kJ mol(-1)), and 6 (-10.02 kJ mol(-1)). This contradicts the estimated proton donor ability of the C--H bonds (2 a<5 a<3<6<4).

  16. Syntheses and Transformations of α-Amino Acids via Palladium-Catalyzed Auxiliary-Directed sp(3) C-H Functionalization.

    PubMed

    He, Gang; Wang, Bo; Nack, William A; Chen, Gong

    2016-04-19

    α-Amino acids (αAA) are one of the most useful chiral building blocks for synthesis. There are numerous general strategies that have commonly been used for αAA synthesis, many of which employ de novo synthesis focused on enantioselective bond construction around the Cα center and others that consider conversion of existing αAA precursors carrying suitable functional groups on side chains (e.g., serine and aspartic acid). Despite significant advances in synthetic methodology, the efficient synthesis of enantiopure αAAs carrying complex side chains, as seen in numerous peptide natural products, remains challenging. Complementary to these "conventional" strategies, a strategy based on the selective functionalization of side chain C-H bonds, particularly sp(3) hybridized C-H bonds, of various readily available αAA precursors may provide a more straightforward and broadly applicable means for the synthesis and transformation of αAAs. However, many hurdles related to the low reactivity of C(sp(3))-H bonds and the difficulty of controlling selectivity must be overcome to realize the potential of C-H functionalization chemistry in this synthetic application. Over the past few years, we have carried out a systematic investigation of palladium-catalyzed bidentate auxiliary-directed C-H functionalization reactions for αAA substrates. Our strategies utilize two different types of amide-linked auxiliary groups, attached at the N or C terminus of αAA substrates, to exert complementary regio- and stereocontrol on C-H functionalization reactions through palladacycle intermediates. A variety of αAA precursors can undergo multiple modes of C(sp(3))-H functionalization, including arylation, alkenylation, alkynylation, alkylation, alkoxylation, and intramolecular aminations, at the β, γ, and even δ positions to form new αAA products with diverse structures. In addition to transforming αAAs at previously unreachable positions, these palladium-catalyzed C-H

  17. 40 CFR 721.785 - Halogenated alkane aromatic compound (generic name).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 32 2012-07-01 2012-07-01 false Halogenated alkane aromatic compound... Specific Chemical Substances § 721.785 Halogenated alkane aromatic compound (generic name). (a) Chemical... as a halogenated alkane aromatic compound (PMN P-94-1747) is subject to reporting under this...

  18. 40 CFR 721.785 - Halogenated alkane aromatic compound (generic name).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Halogenated alkane aromatic compound... Specific Chemical Substances § 721.785 Halogenated alkane aromatic compound (generic name). (a) Chemical... as a halogenated alkane aromatic compound (PMN P-94-1747) is subject to reporting under this...

  19. 40 CFR 721.785 - Halogenated alkane aromatic compound (generic name).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 31 2014-07-01 2014-07-01 false Halogenated alkane aromatic compound... Specific Chemical Substances § 721.785 Halogenated alkane aromatic compound (generic name). (a) Chemical... as a halogenated alkane aromatic compound (PMN P-94-1747) is subject to reporting under this...

  20. 40 CFR 721.785 - Halogenated alkane aromatic compound (generic name).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Halogenated alkane aromatic compound... Specific Chemical Substances § 721.785 Halogenated alkane aromatic compound (generic name). (a) Chemical... as a halogenated alkane aromatic compound (PMN P-94-1747) is subject to reporting under this...